Preliminary test results for post irradiation examination on the HTTR fuel

International Nuclear Information System (INIS)

Ueta, Shohei; Umeda, Masayuki; Sawa, Kazuhiro; Sozawa, Shizuo; Shimizu, Michio; Ishigaki, Yoshinobu; Obata, Hiroyuki

2007-01-01

The future post-irradiation program for the first-loading fuel of the HTTR is scheduled using the HTTR fuel handling facilities and the Hot Laboratory in the Japan Materials Testing Reactor (JMTR) to confirm its irradiation resistance and to obtain data on its irradiation characteristics in the core. This report describes the preliminary test results and the future plan for a post-irradiation examination for the HTTR fuel. In the preliminary test, fuel compacts made with the same SiC-coated fuel particle as the first loading fuel were used. In the preliminary test, dimension, weight, fuel failure fraction, and burnup were measured, and X-ray radiograph, SEM, and EPMA observations were carried out. Finally, it was confirmed that the first-loading fuel of the HTTR showed good quality under an irradiation condition. The future plan for the post-irradiation tests was described to confirm its irradiation performance and to obtain data on its irradiation characteristics in the HTTR core. (author)

Strategic Planning: Shaping Future Success

Science.gov (United States)

2016-09-01

fielding, the PM may also be planning for future increments , sustainment and other long-term ef- forts. Strategic planning can help the PM position these...introduced the Planning, Programming, and Budgeting System (PPBS) to the DoD. Prior to that, the DoD’s budget - ing focused on areas such as overhead

Food irradiation - past, present and future

International Nuclear Information System (INIS)

Diehl, J.F.

2002-01-01

A review is presented of historical developments, the present situation, and expected future developments in the field of food irradiation. Acceptance of the process in different parts of the world is not uniform. In the USA and in some other countries where health authorities actively encourage the use of this technology, commercial application has greatly advanced in recent years. In contrast, progress in the European Union is still slow

Integration of the radiotherapy irradiation planning in the digital workflow

International Nuclear Information System (INIS)

Roehner, F.; Schmucker, M.; Henne, K.; Bruggmoser, G.; Grosu, A.L.; Frommhold, H.; Heinemann, F.E.; Momm, F.

2013-01-01

Background and purpose: At the Clinic of Radiotherapy at the University Hospital Freiburg, all relevant workflow is paperless. After implementing the Operating Schedule System (OSS) as a framework, all processes are being implemented into the departmental system MOSAIQ. Designing a digital workflow for radiotherapy irradiation planning is a large challenge, it requires interdisciplinary expertise and therefore the interfaces between the professions also have to be interdisciplinary. For every single step of radiotherapy irradiation planning, distinct responsibilities have to be defined and documented. All aspects of digital storage, backup and long-term availability of data were considered and have already been realized during the OSS project. Method: After an analysis of the complete workflow and the statutory requirements, a detailed project plan was designed. In an interdisciplinary workgroup, problems were discussed and a detailed flowchart was developed. The new functionalities were implemented in a testing environment by the Clinical and Administrative IT Department (CAI). After extensive tests they were integrated into the new modular department system. Results and conclusion: The Clinic of Radiotherapy succeeded in realizing a completely digital workflow for radiotherapy irradiation planning. During the testing phase, our digital workflow was examined and afterwards was approved by the responsible authority. (orig.)

China's move to food irradiation

International Nuclear Information System (INIS)

Wedekind, L.H.

1986-01-01

The Chinese officials outlined China's past and future directions at a recent international food irradiation seminar in Shanghai sponsored by the FAO and IAEA. The meeting was attended by about 170 participants from China and 22 other countries, primarily from the Asian and Pacific region. Three food irradiation plants currently are operating in the region and 14 more are planned over the next 5 years. It was reported that China continues to suffer high food losses, up to 30% for some commodities, primarily due to preservation and storage problems. In January 1986, the first of five regional irradiation facilities planned in China officially opened in Shanghai. The Shanghai irradiation centre plans to process up to 35,000 tons of vegetables a year, as well as some spices, fruits, and non-food products. The Ministry of Public Health has approved seven irradiated foods as safe human diets: rice, potatoes, onions, garlic, peanuts, mushrooms and pork sausages; approval for apples is expected shortly. The Chinese officials at the Shanghai meeting stressed their openness to foreign participation and cooperation in food irradiation's development

Recent irradiation tests for future nuclear system at HANARO

Energy Technology Data Exchange (ETDEWEB)

Cho, Man Soon; Choo, Kee Nam; Yang, Seong Woo; Park, Sang Jun [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-05-15

The capsule at HANARO is a device that evaluates the irradiation effects of nuclear materials and fuels, which can reproduce the environment of nuclear power plants and accelerate to reach to the end of life condition. As the integrity assessment and the extension of lifetime of nuclear power plants are recently considered as important issues in Korea, the requirements for irradiation test are gradually being increased. The capacity and capability irradiation tests at HANARO are becoming important because Korea strives to develop SFR (Sodium-cooled Fast Reactor) and VHTR (Very High Temperature Reactor) among the future nuclear system and to export the research reactors and to develop the fusion reactor technology.

Daily CT planning during boost irradiation of prostate cancer. Feasibility and time requirements

International Nuclear Information System (INIS)

Geinitz, H.; Zimmermann, F.B.; Kuzmany, A.; Kneschaurek, P.

2000-01-01

Background: In the irradiation of prostate cancer internal organ movement leads to uncertainties in the daily localization of the clinical target volume. Therefore more or less large safety margins are added when designing the treatment portals. With daily CT planning internal organ movement can be compensated to some extent, safety margins can be reduced and irradiated normal tissue can be spared. The feasibility of daily CT-based 3D treatment planning is studied in a patient with localized prostate carcinoma using a new patient positioning system. Methods: Daily CT planning was applied during boost irradiation of a patient with prostate cancer: After patient immobilization the pelvis was scanned in 3 mm CT slices. Planning was done with the BrainSCAN planning system for stereotactic body irradiation. The prostate was contoured in all slices and the safety margins of the micromultileafs were automatically set to the distance chosen by the physician (0.8 cm). Patient positioning was done with the BrainLAB ExacTrac positioning system on the basis of skin attached stereotactic body markers. Before each treatment verification images of the isocenter were taken. Results: The total time requirement for planning and irradiation was about 1 hour 15 minutes. Patient positioning on the treatment couch took about 10 minutes. The accuracy of the positioning system was good (75% of the deviations were smaller than 3 mm). The shift of the single markers from CT scan to CT scan was more extensive than those of the center of all 7 markers combined (47% of the deviations were smaller than 3 mm). The location of the markers seems to influence the magnitude of their dislocation. Conclusion: Daily CT planning is feasible but time consuming. The new patient positioning system ExacTrac is an interesting tool especially for daily CT planning since conventional simulation can be omitted. (orig.) [de

Evaluation of a software module for adaptive treatment planning and re-irradiation.

Science.gov (United States)

Richter, Anne; Weick, Stefan; Krieger, Thomas; Exner, Florian; Kellner, Sonja; Polat, Bülent; Flentje, Michael

2017-12-28

The aim of this work is to validate the Dynamic Planning Module in terms of usability and acceptance in the treatment planning workflow. The Dynamic Planning Module was used for decision making whether a plan adaptation was necessary within one course of radiation therapy. The Module was also used for patients scheduled for re-irradiation to estimate the dose in the pretreated region and calculate the accumulated dose to critical organs at risk. During one year, 370 patients were scheduled for plan adaptation or re-irradiation. All patient cases were classified according to their treated body region. For a sub-group of 20 patients treated with RT for lung cancer, the dosimetric effect of plan adaptation during the main treatment course was evaluated in detail. Changes in tumor volume, frequency of re-planning and the time interval between treatment start and plan adaptation were assessed. The Dynamic Planning Tool was used in 20% of treated patients per year for both approaches nearly equally (42% plan adaptation and 58% re-irradiation). Most cases were assessed for the thoracic body region (51%) followed by pelvis (21%) and head and neck cases (10%). The sub-group evaluation showed that unintended plan adaptation was performed in 38% of the scheduled cases. A median time span between first day of treatment and necessity of adaptation of 17 days (range 4-35 days) was observed. PTV changed by 12 ± 12% on average (maximum change 42%). PTV decreased in 18 of 20 cases due to tumor shrinkage and increased in 2 of 20 cases. Re-planning resulted in a reduction of the mean lung dose of the ipsilateral side in 15 of 20 cases. The experience of one year showed high acceptance of the Dynamic Planning Module in our department for both physicians and medical physicists. The re-planning can potentially reduce the accumulated dose to the organs at risk and ensure a better target volume coverage. In the re-irradiation situation, the Dynamic Planning Tool was used to

Decommissioning program and future plan for research hot laboratory (2)

International Nuclear Information System (INIS)

Koya, Toshio; Nozawa, Yukio; Hanada, Yasushi; Ono, Katsuto; Kanazawa, Hiroyuki; Nihei, Yasuo; Owada, Isao

2010-01-01

The Research Hot Laboratory (RHL) in Japan Atomic Energy Agency (JAEA) was constructed in 1961, as the first one in JAPAN, to perform the examinations of irradiated fuels and materials. RHL consists of 10 heavy concrete cells and 38 lead cells, which had been contributed to research and development program in or out of JAEA for the investigation of irradiation behavior for fuels and nuclear materials. However, RHL is the one of target as the rationalization program for decrepit facilities in former Tokai institute. Therefore the decommissioning works of RHL have been started on April 2003. The decommissioning work will be progressing, dismantling the lead cells and decontamination of concrete caves then release in the regulation of controlled area. The 18 lead cells (including semi-hot cell and junior-cell) had been dismantled. Removal of the applause from the cells, survey of the contamination revel in the lead cells and prediction of radio active waste have been finished as the preparing work for dismantling of the remained 20 lead cells. The future plan of decommissioning work has been prepared to incarnate the basic vision and dismantling procedure. (author)

More than 2 years' experience with computer-aided irradiation planning in clinical routine

International Nuclear Information System (INIS)

Heller, H.; Rathje, J.

1976-01-01

This is a report on an irradiation planning system which has been used for about 2 years in the department of radiotherapy in the general hospital in Altona. Hard- and software as well as the mathematical model for the description of the dose distribution are described. The compromise between the required accuray of the irradiation plan and the investment in computer-technical activities and computer time is discussed. (orig./LN) [de

CT planning of boost irradiation in radiotherapy of breast cancer after conservative surgery

International Nuclear Information System (INIS)

Messer, Peter M.; Kirikuta, Ion C.; Bratengeier, Klaus; Flentje, Michael

1997-01-01

Background and purpose: A study was performed to compare the accuracy of clinical treatment set-up and CT planning of boost irradiation in radiotherapy of breast cancer. Material and methods: Between September 1993 and October 1994, 45 women who underwent breast conserving surgery and irradiation containing a boost to the tumour bed were investigated. Prospective evaluation of CT planning of the boost was carried out. The target volume/boost field, electron energy and treatment set-up had been defined on the basis of clinical examination, initial and postsurgical mammograms by one radiotherapist. Next, a planning CT was performed in treatment position and a CT-based treatment plan was calculated according to a target volume defined by another radiotherapist. The clinical treatment set-up was imported into our computer planning system and the resulting isodose plots were compared with those from CT planning and reviewed critically. Results: The clinically defined treatment set-up had to be modified in 80% of the patients. Most discrepancies observed were related to the size of the boost field itself and the chosen electron energy. Minor changes had to be made with respect to angle of table and gantry. Conclusions: Critical review of the isodose plots from both methods showed clear advantages for CT planning. Guidelines for target definition in CT planning of boost irradiation and subgroups of patients benefiting from this technique are described

The Future of Electricity Resource Planning

Energy Technology Data Exchange (ETDEWEB)

Kahrl, Fredrich [Energy and Environmental Economics, Inc., San Francisco, CA (United States); Mills, Andrew [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Lavin, Luke [Energy and Environmental Economics, Inc., San Francisco, CA (United States); Ryan, Nancy [Energy and Environmental Economics, Inc., San Francisco, CA (United States); Olsen, Arne [Energy and Environmental Economics, Inc., San Francisco, CA (United States); Schwartz, Lisa [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2016-09-14

Electricity resource planning is the process of identifying longer-term investments to meet electricity reliability requirements and public policy goals at a reasonable cost. Resource planning processes provide a forum for regulators, electric utilities, and electricity industry stakeholders to evaluate the economic, environmental, and social benefits and costs of different investment options. By facilitating a discussion on future goals, challenges and strategies, resource planning processes often play an important role in shaping utility business decisions. Resource planning emerged more than three decades ago in an era of transition, where declining electricity demand and rising costs spurred fundamental changes in electricity industry regulation and structure. Despite significant changes in the industry, resource planning continues to play an important role in supporting investment decision making. Over the next two decades, the electricity industry will again undergo a period of transition, driven by technological change, shifting customer preferences and public policy goals. This transition will bring about a gradual paradigm shift in resource planning, requiring changes in scope, approaches and methods. Even as it changes, resource planning will continue to be a central feature of the electricity industry. Its functions — ensuring the reliability of high voltage (“bulk”) power systems, enabling oversight of regulated utilities and facilitating low-cost compliance with public policy goals — are likely to grow in importance as the electricity industry enters a new period of technological, economic and regulatory change. This report examines the future of electricity resource planning in the context of a changing electricity industry. The report examines emerging issues and evolving practices in five key areas that will shape the future of resource planning: (1) central-scale generation, (2) distributed generation, (3) demand-side resources, (4

'The future of the electron beam irradiation service business'

International Nuclear Information System (INIS)

Yamase, Yutaka

1998-01-01

The high energy electron beam has less penetration power in comparison with the gamma ray which has been used from before. However, the dose rate of the electron beam is considerably high in comparison with the gamma ray with more than several thousand times. Therefore, the irradiation of the product can be done in a short time, and there are cheap characteristics further in the irradiation cost as well. And, an electron beam is the technology which is very easy to accept in the country of a nuclear allergy constitution like our country so that it may not use radioactive substance. This time, I'd like to think about the present condition of the electron beam irradiation service business and a future based on the experience of Tsukuba EBcenter until now. (J.P.N.)

Future of U.S. cobalt irradiation

International Nuclear Information System (INIS)

Clouser, J.F.

1995-01-01

An examination of future cobalt needs requires us to review our base business, customer trends, technology trends, and people, the human aspect of our business. I am approaching this discussion from the perspective of a contract supplier of gamma irradiation services in the United States. The base business is comprised primarily of the sterilization of medical devices followed by containers, labware, food products, and other items. Since the core business is serving the medical industry, trends observed within medical device manufacturers can impact our growth and the type of services needed to support that industry. (author)

Scrotal Irradiation in Primary Testicular Lymphoma: Review of the Literature and In Silico Planning Comparative Study

International Nuclear Information System (INIS)

Brouwer, Charlotte L.; Wiesendanger, Esther M.; Hulst, Peter C. van der; Imhoff, Gustaaf W. van; Langendijk, Johannes A.; Beijert, Max

2013-01-01

We examined adjuvant irradiation of the scrotum in primary testicular lymphoma (PTL) by means of a literature review in MEDLINE, a telephone survey among Dutch institutes, and an in silico planning comparative study on scrotal irradiation in PTL. We did not find any uniform adjuvant irradiation technique assuring a safe planning target volume (PTV) coverage in published reports, and the definition of the clinical target volume is unclear. Histopathologic studies of PTL show a high invasion rate of the tunica albuginea, the epididymis, and the spermatic cord. In retrospective studies, a prescribed dose of at least 30 Gy involving the scrotum is associated with best survival. The majority of Dutch institutes irradiate the whole scrotum without using a planning computed tomography scan, with a single electron beam and a total dose of 30 Gy. The in silico planning comparative study showed that all evaluated approaches met a D 95% scrotal dose of at least 85% of the prescription dose, without exceeding the dose limits of critical organs. Photon irradiation with 2 oblique beams using wedges resulted in the best PTV coverage, with a mean value of 95% of the prescribed dose, with lowest maximum dose. Adjuvant photon or electron irradiation of the whole scrotum including the contralateral testicle with a minimum dose of 30 Gy is recommended in PTL. Computed tomography-based radiation therapy treatment planning with proper patient positioning and position verification guarantees optimal dose coverage.

Policy plan for the early approval for irradiated meat products and the promotion of irradiated meats in market

Energy Technology Data Exchange (ETDEWEB)

Lee, Ju Woon [Team for Radiation Food Science and Biotechnology, Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, Jeongeup (Korea, Republic of); Kim, Wang Geun [Ministry of Education, Science and Technology, Seoul (Korea, Republic of); Kim, Kyong Su [Dept. of Food and Nutrition, Chosun University, Gwangju (Korea, Republic of); Yook, Hong Sun [Dept. of Food and Nutrition, Chungnam National University, Daejeon (Korea, Republic of); Kim, Cheon Jei [Division of Animal Life Science, Konkuk University, Seoul (Korea, Republic of)

2008-11-15

The consumption of meat products is gradually being increased by the development of livestock raising technology, industrialized farm management and international trade. This increased consumption also created new market for ready-to-eat and ready-to-cook meat products. However, these convenience meat products can be easily contaminated during the processing and storage by pathogens, and there have been many reported cases of food borne illness by meats. One of the most effective methods for the decontamination of meat products is the radiation technology. Food irradiation was the established, well-recognized and safe sterilization method. Many other countries researched the effect of irradiation on the meat products and approved the irradiation. In this article, the effectiveness, the international acceptance, the economics and the research trend of irradiation on meat products have been reviewed. Also, the policy plans for the early approval of the irradiated meat products in Korea and the promotion policy of irradiated meats in market were discussed.

Policy plan for the early approval for irradiated meat products and the promotion of irradiated meats in market

International Nuclear Information System (INIS)

Lee, Ju Woon; Kim, Wang Geun; Kim, Kyong Su; Yook, Hong Sun; Kim, Cheon Jei

2008-01-01

The consumption of meat products is gradually being increased by the development of livestock raising technology, industrialized farm management and international trade. This increased consumption also created new market for ready-to-eat and ready-to-cook meat products. However, these convenience meat products can be easily contaminated during the processing and storage by pathogens, and there have been many reported cases of food borne illness by meats. One of the most effective methods for the decontamination of meat products is the radiation technology. Food irradiation was the established, well-recognized and safe sterilization method. Many other countries researched the effect of irradiation on the meat products and approved the irradiation. In this article, the effectiveness, the international acceptance, the economics and the research trend of irradiation on meat products have been reviewed. Also, the policy plans for the early approval of the irradiated meat products in Korea and the promotion policy of irradiated meats in market were discussed

Effective Planning of the Future of the Arctic

Science.gov (United States)

Sentsov, A.; Bolsunovskaya, Yu; Bolsunovskaya, L.

2014-08-01

The problems of the Arctic region have become the most important ones in the world. Political risks hinder the industrial development of the region. This paper addresses the problem of planning and modeling the future of this region. It presents the problems of developing a model of the future due to the ideologies and strategies of two main actors in the Arctic, the United States and the Russian Federation. The effects of a bipolar perception of the future of the region and of the whole world are shown. A model of the effective planning of the future of the Arctic region is proposed.

Statistical evaluation of the dose-distribution charts of the National Computerized Irradiation Planning Network

International Nuclear Information System (INIS)

Varjas, Geza; Jozsef, Gabor; Gyenes, Gyoergy; Petranyi, Julia; Bozoky, Laszlo; Pataki, Gezane

1985-01-01

The establishment of the National Computerized Irradiation Planning Network allowed to perform the statistical evaluation presented in this report. During the first 5 years 13389 dose-distribution charts were calculated for the treatment of 5320 patients, i.e. in average, 2,5 dose-distribution chart-variants per patient. This number practically did not change in the last 4 years. The irradiation plan of certain tumour localizations was performed on the basis of the calculation of, in average, 1.6-3.0 dose-distribution charts. Recently, radiation procedures assuring optimal dose-distribution, such as the use of moving fields, and two- or three-irradiation fields, are gaining grounds. (author)

SORCE and Future Satellite Observations of Solar Irradiance

Science.gov (United States)

Cahalan, Robert F.; Rottman, G.; Woods, T.; Lawrence, G.; Kopp, G.; Harder, J.; McClintock, W.

2003-01-01

With solar activity just passing the maximum of cycle 23, SORCE is beginning a 5 year mission to measure total solar irradiance (TSI) with unprecedented accuracy using phase-sensitive detection, and to measure spectral solar irradiance (SSI) with unprecedented spectral coverage, from 1 to 2000 nm. The new Total Irradiance Monitor (TIM) has 4 active cavity radiometers, any one of which can be used as a fixed-temperature reference against any other that is exposed to the Sun via a shutter that cycles at a rate designed to minimize noise at the shutter frequency. The new Spectral Irradiance Monitor (SIM) is a dual Fery prism spectrometer that can employ either prism as a monochromatic source on the other prism, thus monitoring its transmission during the mission lifetime. Either prism can measure SSI from 200 to 2000 nm, employing the same phase-sensitive electrical substitution strategy as TIM. SORCE also carries dual SOLSTICE instruments to cover the spectral range 100-320 nm, similar to the instruments onboard UARS, and also an XUV Photometer System (XPS) similar to that on TIMED. SSI has now been added to TSI as a requirement of EOS and NPOESS, because different spectral components drive different components of the climate system - UV into upper atmosphere and stratospheric ozone, IR into tropospheric water vapor and clouds, and Visible into the oceans and biosphere. Succeeding satellite missions being planned for 2006 and 2011 will continue to monitor these critical solar variables.

Does selective pleural irradiation of malignant pleural mesothelioma allow radiation dose escalation. A planning study

International Nuclear Information System (INIS)

Botticella, A.; Defraene, G.; Nackaerts, K.; Deroose, C.; Coolen, J.; Nafteux, P.; Vanstraelen, B.; Joosten, S.; Michiels, L.A.W.; Peeters, S.; Ruysscher, D. de

2017-01-01

After lung-sparing radiotherapy for malignant pleural mesothelioma (MPM), local failure at sites of previous gross disease represents the dominant form of failure. Our aim is to investigate if selective irradiation of the gross pleural disease only can allow dose escalation. In all, 12 consecutive stage I-IV MPM patients (6 left-sided and 6 right-sided) were retrospectively identified and included. A magnetic resonance imaging-based pleural gross tumor volume (GTV) was contoured. Two sets of planning target volumes (PTV) were generated for each patient: (1) a ''selective'' PTV (S-PTV), originating from a 5-mm isotropic expansion from the GTV and (2) an ''elective'' PTV (E-PTV), originating from a 5-mm isotropic expansion from the whole ipsilateral pleural space. Two sets of volumetric modulated arc therapy (VMAT) treatment plans were generated: a ''selective'' pleural irradiation plan (SPI plan) and an ''elective'' pleural irradiation plan (EPI plan, planned with a simultaneous integrated boost technique [SIB]). In the SPI plans, the average median dose to the S-PTV was 53.6 Gy (range 41-63.6 Gy). In 4 of 12 patients, it was possible to escalate the dose to the S-PTV to >58 Gy. In the EPI plans, the average median doses to the E-PTV and to the S-PTV were 48.6 Gy (range 38.5-58.7) and 49 Gy (range 38.6-59.5 Gy), respectively. No significant dose escalation was achievable. The omission of the elective irradiation of the whole ipsilateral pleural space allowed dose escalation from 49 Gy to more than 58 Gy in 4 of 12 chemonaive MPM patients. This strategy may form the basis for nonsurgical radical combined modality treatment of MPM. (orig.) [de

Dosimetric evaluation of total marrow irradiation using 2 different planning systems

International Nuclear Information System (INIS)

Nalichowski, Adrian; Eagle, Don G.; Burmeister, Jay

2016-01-01

This study compared 2 different treatment planning systems (TPSs) for quality and efficiency of total marrow irradiation (TMI) plans. The TPSs used in this study were VOxel-Less Optimization (VoLO) (Accuray Inc, Sunnyvale, CA) using helical dose delivery on a Tomotherapy Hi-Art treatment unit and Eclipse (Varian Medical Systems Inc, Palo Alto, CA) using volumetric modulated arc therapy (VMAT) dose delivery on a Varian iX treatment unit. A total dose of 1200 cGy was prescribed to cover 95% of the planning target volume (PTV). The plans were optimized and calculated based on a single CT data and structure set using the Alderson Rando phantom (The Phantom Laboratory, Salem, NY) and physician contoured target and organ at risk (OAR) volumes. The OARs were lungs, heart, liver, kidneys, brain, and small bowel. The plans were evaluated based on plan quality, time to optimize the plan and calculate the dose, and beam on time. The resulting mean and maximum doses to the PTV were 1268 and 1465 cGy for VoLO and 1284 and 1541 cGy for Eclipse, respectively. For 5 of 6 OAR structures the VoLO system achieved lower mean and D10 doses ranging from 22% to 52% and 3% to 44%, respectively. Total computational time including only optimization and dose calculation were 0.9 hours for VoLO and 3.8 hours for Eclipse. These times do not include user-dependent target delineation and field setup. Both planning systems are capable of creating high-quality plans for total marrow irradiation. The VoLO planning system was able to achieve more uniform dose distribution throughout the target volume and steeper dose fall off, resulting in superior OAR sparing. VoLO's graphics processing unit (GPU)–based optimization and dose calculation algorithm also allowed much faster creation of TMI plans.

Dosimetric evaluation of total marrow irradiation using 2 different planning systems

Energy Technology Data Exchange (ETDEWEB)

Nalichowski, Adrian, E-mail: nalichoa@karmanos.org [Karmanos Cancer Center, Detroit, MI (United States); Eagle, Don G. [Wayne State University School of Medicine, Detroit, MI (United States); Burmeister, Jay [Karmanos Cancer Center, Detroit, MI (United States); Wayne State University School of Medicine, Detroit, MI (United States)

2016-10-01

This study compared 2 different treatment planning systems (TPSs) for quality and efficiency of total marrow irradiation (TMI) plans. The TPSs used in this study were VOxel-Less Optimization (VoLO) (Accuray Inc, Sunnyvale, CA) using helical dose delivery on a Tomotherapy Hi-Art treatment unit and Eclipse (Varian Medical Systems Inc, Palo Alto, CA) using volumetric modulated arc therapy (VMAT) dose delivery on a Varian iX treatment unit. A total dose of 1200 cGy was prescribed to cover 95% of the planning target volume (PTV). The plans were optimized and calculated based on a single CT data and structure set using the Alderson Rando phantom (The Phantom Laboratory, Salem, NY) and physician contoured target and organ at risk (OAR) volumes. The OARs were lungs, heart, liver, kidneys, brain, and small bowel. The plans were evaluated based on plan quality, time to optimize the plan and calculate the dose, and beam on time. The resulting mean and maximum doses to the PTV were 1268 and 1465 cGy for VoLO and 1284 and 1541 cGy for Eclipse, respectively. For 5 of 6 OAR structures the VoLO system achieved lower mean and D10 doses ranging from 22% to 52% and 3% to 44%, respectively. Total computational time including only optimization and dose calculation were 0.9 hours for VoLO and 3.8 hours for Eclipse. These times do not include user-dependent target delineation and field setup. Both planning systems are capable of creating high-quality plans for total marrow irradiation. The VoLO planning system was able to achieve more uniform dose distribution throughout the target volume and steeper dose fall off, resulting in superior OAR sparing. VoLO's graphics processing unit (GPU)–based optimization and dose calculation algorithm also allowed much faster creation of TMI plans.

Foundation for the Future. 2013-2015 Strategic Plan. FY13 Organizational Performance Plan

Science.gov (United States)

2013-01-01

Strengths, Weaknesses, Opportunities, and Threats ( SWOT ) Analysis 192013–2015 Strategic Plan tr t ic l The Planning, Policy, and Leadership Support (PPLS...and public cloud mix Conduct government/private market survey to determine future cloud strategy Implement future cloud strategy  Thin Client...Systems Acquisition Reform Act of 2009, National Security Strategy , and the Digital Government Strategy • Department of Defense, as set forth in the

Scenario planning and nanotechnological futures

International Nuclear Information System (INIS)

Farber, Darryl; Lakhtakia, Akhlesh

2009-01-01

Scenario planning may assist us in harnessing the benefits of nanotechnology and managing the associated risks for the good of the society. Scenario planning is a way to describe the present state of the world and develop several hypotheses about the future of the world, thereby enabling discussions about how the world ought to be. Scenario planning thus is not only a tool for learning and foresight, but also for leadership. Informed decision making by experts and political leaders becomes possible, while simultaneously allaying the public's perception of the risks of new and emerging technologies such as nanotechnology. Two scenarios of the societal impact of nanotechnology are the mixed-signals scenario and the confluence scenario. Technoscientists have major roles to play in both scenarios.

Irradiation Planning for Fully-Ceramic Micro-encsapsulated fuel in ATR at LWR-relevant conditions: year-end report on FY-2011

International Nuclear Information System (INIS)

Ougouag, Abderrafi M.; Sen, R. Sonat; Pope, Michael A.; Boer, Brian

2011-01-01

experimental control for future experimental phases. Besides the prediction of irradiation times, preliminary work was carried out on other aspects of irradiation planning. In particular, a method for evaluating the interplay of depletion, material performance modeling and irradiation is identified by reference to a companion report. Another area that was addressed in a preliminary fashion is the identification and selection of a strategy for the physical and mechanical design of the irradiation experiments. The principal conclusion is that the similarity between the FCM fuel and the fuel compacts of the Next Generation Nuclear Plant prismatic design are strong enough to warrant using irradiation hardware designs and instrumentation adapted from the AGR irradiation tests. Modifications, if found necessary, will probably be few and small, except as pertains to the water environment and its implications on the use of SiC cladding or SiC matrix with no additional cladding.

Workshop on materials irradiation effects and applications 2012

International Nuclear Information System (INIS)

Xu, Qiu; Sato, Koichi; Yoshiie, Toshimasa

2013-01-01

For the study of the material irradiation effects, irradiation fields with improved control capabilities, advanced post irradiation experiments and well developed data analyses are required. This workshop aims to discuss new results and to plan the future irradiation research in the KUR. General meeting was held from December 14, 2012 to December 15, 2012 with 44 participants and 28 papers were presented. Especially recent experimental results using irradiation facilities in the KUR such as Materials Controlled Irradiation Facility, Low Temperature Loop and LINAC, and results of computer simulation, and fruitful discussions were performed. This volume contains the summary and selected transparencies presented in the meeting. (author)

Using Human Capital Planning to Predict Future Talent Needs

Science.gov (United States)

Ruse, Donald; Jansen, Karen

2008-01-01

Human capital planning is an important tool in predicting future talent needs and sustaining organizational excellence over the long term. This article examines the concept of human capital planning and outlines how institutions can use HCP to identify the type and number of talent needed both now and in the future, recognize and prioritize talent…

New JMTR irradiation test plan on fuels and materials

International Nuclear Information System (INIS)

Nakamura, Takehiko; Nishiyama, Yutaka; Chimi, Yasuhiro; Sasajima, Hideo; Ogiyanagi, Jin; Nakamura, Jinichi; Suzuki, Masahide; Kawamura, Hiroshi

2009-01-01

In order to maintain and enhance safety of light water reactors (LWRs) in long-term and up-graded operations, proper understanding of irradiation behavior of fuels and materials is essentially important. Japanese government and the Japan Atomic Energy Agency (JAEA) have decided to refurbish the Japan Materials Testing Reactor (JMTR) and to install new tests rigs, in order to play an active role for solving irradiation related issues on plant aging and high-duty uses of the current LWRs and on development of next-generation reactors. New tests on fuel integrity under simulated abnormal transients and high-duty irradiation conditions are planned in the JMTR. Power ramp tests of newdesign fuel rods will also be performed in the first stage of the program, which is expected to start in year 2011 after refurbishment of the JMTR. Combination of the JMTR tests with simulated reactivity initiated accident tests in the Nuclear Safety Research Reactor (NSRR) and loss of coolant accident tests in hot laboratories would serve as the integrated fuel safety research on the high performance fuels at extended burnups, covering from the normal to the accident conditions, including abnormal transients. For the materials irradiation, fracture toughness of reactor vessel steels and stress corrosion cracking behavior of stainless steels are being studied in addition to basic irradiation behavior of nuclear materials such as hafnium. The irradiation studies would contribute not only to solve the current problems but also to identify possible seeds of troubles and to make proactive responses. (author)

UTN's gamma irradiation facility: design and concept

International Nuclear Information System (INIS)

Mohamad Noor Mohamad Yunus

1986-01-01

UTN is building a multipurpose gamma irradiation facility which compromises of research and pilot scale irradiation cells in The Fifth Malaysia Plan. The paper high-lights the basic futures of the facility in terms of its design and selection including layout sketches. Plant performances and limitations are discussed. Plants safety is briefly highlighted in block diagrams. Lastly, a typical specification brief is tabled in appendix for reference purposes. (author)

Factors affecting practical application of food irradiation

International Nuclear Information System (INIS)

1990-04-01

FAO and IAEA convened an Advisory Group Meeting on Commercial Use of Food Irradiation in order to discuss problems of the industry's acceptance of food irradiation and their remedies. Senior executives from major food industries, trade and consumer organizations were invited to discuss these problems and to prepare a report which would serve as the basis for future plan of action by sponsoring Organizations in the field of food irradiation. This publication contains the report of the meeting, papers presented by the participants and their recommendations to the sponsoring Organizations. Refs and tabs

Software for planning processes gamma irradiation sterilization of products intended for health care

International Nuclear Information System (INIS)

Gonzalez, Juan P; Carrillo, Miguel A; Mangussi, Josefina; Menendez, Franco

2012-01-01

In this work was developed an application software for PC, with a friendly interface whose main objective is to facilitate the planning processes for gamma irradiation of health care devices for a irradiation plant, decreasing costs and delays caused in the dosimetry and pretesting. Wascreated a program that predicts, previously establishing the location of a plane in the enclosure of irradiation, dose rate in [kGy/h] at certain strategic points of this plane in addition to calculating the corresponding absorbed dose [kGy] for a time defined by the user (author)

The future of hydropower planning modeling

Science.gov (United States)

Haas, J.; Zuñiga, D.; Nowak, W.; Olivares, M. A.; Castelletti, A.; Thilmant, A.

2017-12-01

Planning the investment and operation of hydropower plants with optimization tools dates back to the 1970s. The focus used to be solely on the provision of energy. However, advances in computational capacity and solving algorithms, dynamic markets, expansion of renewable sources, and a better understanding of hydropower environmental impacts have recently led to the development of novel planning approaches. In this work, we provide a review, systematization, and trend analysis of these approaches. Further, through interviews with experts, we outline the future of hydropower planning modeling and identify the gaps towards it. We classified the found models along environmental, economic, multipurpose and technical criteria. Environmental interactions include hydropeaking mitigation, water quality protection and limiting greenhouse gas emissions from reservoirs. Economic and regulatory criteria consider uncertainties of fossil fuel prices and relicensing of water rights and power purchase agreements. Multipurpose considerations account for irrigation, tourism, flood protection and drinking water. Recently included technical details account for sedimentation in reservoirs and variable efficiencies of turbines. Additional operational considerations relate to hydrological aspects such as dynamic reservoir inflows, water losses, and climate change. Although many of the above criteria have been addressed in detail on a project-to-project basis, models remain overly simplistic for planning large power fleets. Future hydropower planning tools are expected to improve the representation of the water-energy nexus, including environmental and multipurpose criteria. Further, they will concentrate on identifying new sources of operational flexibility (e.g. through installing additional turbines and pumps) for integrating renewable energy. The operational detail will increase, potentially emphasizing variable efficiencies, storage capacity losses due to sedimentation, and the

Physics Teachers' Future Teaching Plans

Science.gov (United States)

Physics Teacher, 2012

2012-01-01

There are two sides of the physics teacher turnover equation: teachers leaving and teachers entering. This month we will focus on teachers' future teaching plans. As seen in the figure, about 5% of the 27,000 teachers who taught physics in U.S. high schools in 2008-09 were in their first year of teaching physics (but not necessarily their first…

SU-F-T-150: Comparing Normal Tissue Irradiated Volumes for Proton Vs. Photon Treatment Plans On Lung Patients

Energy Technology Data Exchange (ETDEWEB)

Liu, A; Mohan, R; Liao, Z [UT MD Anderson Cancer Center, Houston, TX (United States)

2016-06-15

Purpose: The aim of this work is to compare the “irradiated volume” (IRV) of normal tissues receiving 5, 20, 50, 80 and 90% or higher of the prescription dose with passively scattered proton therapy (PSPT) vs. IMRT of lung cancer patients. The overall goal of this research is to understand the factors affecting outcomes of a randomized PSPT vs. IMRT lung trial. Methods: Thirteen lung cancer patients, selected randomly, were analyzed. Each patient had PSPT and IMRT 74 Gy (RBE) plans meeting the same normal tissue constraints generated. IRVs were created for pairs of IMRT and PSPT plans on each patient. The volume of iGTV, (respiratory motion-incorporated GTV) was subtracted from each IRV to create normal tissue irradiated volume IRVNT. The average of IRVNT DVHs over all patients was also calculated for both modalities and inter-compared as were the selected dose-volume indices. Probability (p value) curves were calculated based on the Wilcoxon matched-paired signed-rank test to determine the dose regions where the statistically significant differences existed. Results: As expected, the average 5, 20 and 50% IRVNT’s for PSPT was found to be significantly smaller than for IMRT (p < 0.001, 0.01, and 0.001 respectively). However, the average 90% IRVNT for PSPT was greater than for IMRT (p = 0.003) presumably due to larger penumbra of protons and the long range of protons in lower density media. The 80% IRVNT for PSPT was also larger but not statistically distinguishable (p = .224). Conclusion: PSPT modality has smaller irradiated volume at lower doses, but larger volume at high doses. A larger cohort of lung patients will be analyzed in the future and IRVNT of patients treated with PSPT and IMRT will be compared to determine if the irradiated volumes (the magnitude of “dose bath”) correlate with outcomes.

Planning Hybrid Intensity Modulated Radiation Therapy for Whole-breast Irradiation

Energy Technology Data Exchange (ETDEWEB)

Farace, Paolo [Medical Physics Department, Regional Oncological Hospital, Cagliari (Italy); Zucca, Sergio; Solla, Ignazio; Fadda, Giuseppina; Durzu, Silvia; Porru, Sergio; Meleddu, Gianfranco [Medical Physics Department, Regional Oncological Hospital, Cagliari (Italy); Deidda, Maria Assunta; Possanzini, Marco; Orru, Sivia; Lay, Giancarlo [Radiotherapy Department, Regional Oncological Hospital, Cagliari (Italy)

2012-09-01

Purpose: To test tangential and not-tangential hybrid intensity modulated radiation therapy (IMRT) for whole-breast irradiation. Methods and Materials: Seventy-eight (36 right-, 42 left-) breast patients were randomly selected. Hybrid IMRT was performed by direct aperture optimization. A semiautomated method for planning hybrid IMRT was implemented using Pinnacle scripts. A plan optimization volume (POV), defined as the portion of the planning target volume covered by the open beams, was used as the target objective during inverse planning. Treatment goals were to prescribe a minimum dose of 47.5 Gy to greater than 90% of the POV and to minimize the POV and/or normal tissue receiving a dose greater than 107%. When treatment goals were not achieved by using a 4-field technique (2 conventional open plus 2 IMRT tangents), a 6-field technique was applied, adding 2 non tangential (anterior-oblique) IMRT beams. Results: Using scripts, manual procedures were minimized (choice of optimal beam angle, setting monitor units for open tangentials, and POV definition). Treatment goals were achieved by using the 4-field technique in 61 of 78 (78%) patients. The 6-field technique was applied in the remaining 17 of 78 (22%) patients, allowing for significantly better achievement of goals, at the expense of an increase of low-dose ({approx}5 Gy) distribution in the contralateral tissue, heart, and lungs but with no significant increase of higher doses ({approx}20 Gy) in heart and lungs. The mean monitor unit contribution to IMRT beams was significantly greater (18.7% vs 9.9%) in the group of patients who required 6-field procedure. Conclusions: Because hybrid IMRT can be performed semiautomatically, it can be planned for a large number of patients with little impact on human or departmental resources, promoting it as the standard practice for whole-breast irradiation.

Planning hybrid intensity modulated radiation therapy for whole-breast irradiation.

Science.gov (United States)

Farace, Paolo; Zucca, Sergio; Solla, Ignazio; Fadda, Giuseppina; Durzu, Silvia; Porru, Sergio; Meleddu, Gianfranco; Deidda, Maria Assunta; Possanzini, Marco; Orrù, Sivia; Lay, Giancarlo

2012-09-01

To test tangential and not-tangential hybrid intensity modulated radiation therapy (IMRT) for whole-breast irradiation. Seventy-eight (36 right-, 42 left-) breast patients were randomly selected. Hybrid IMRT was performed by direct aperture optimization. A semiautomated method for planning hybrid IMRT was implemented using Pinnacle scripts. A plan optimization volume (POV), defined as the portion of the planning target volume covered by the open beams, was used as the target objective during inverse planning. Treatment goals were to prescribe a minimum dose of 47.5 Gy to greater than 90% of the POV and to minimize the POV and/or normal tissue receiving a dose greater than 107%. When treatment goals were not achieved by using a 4-field technique (2 conventional open plus 2 IMRT tangents), a 6-field technique was applied, adding 2 non tangential (anterior-oblique) IMRT beams. Using scripts, manual procedures were minimized (choice of optimal beam angle, setting monitor units for open tangentials, and POV definition). Treatment goals were achieved by using the 4-field technique in 61 of 78 (78%) patients. The 6-field technique was applied in the remaining 17 of 78 (22%) patients, allowing for significantly better achievement of goals, at the expense of an increase of low-dose (∼5 Gy) distribution in the contralateral tissue, heart, and lungs but with no significant increase of higher doses (∼20 Gy) in heart and lungs. The mean monitor unit contribution to IMRT beams was significantly greater (18.7% vs 9.9%) in the group of patients who required 6-field procedure. Because hybrid IMRT can be performed semiautomatically, it can be planned for a large number of patients with little impact on human or departmental resources, promoting it as the standard practice for whole-breast irradiation. Copyright © 2012 Elsevier Inc. All rights reserved.

Planning Hybrid Intensity Modulated Radiation Therapy for Whole-breast Irradiation

International Nuclear Information System (INIS)

Farace, Paolo; Zucca, Sergio; Solla, Ignazio; Fadda, Giuseppina; Durzu, Silvia; Porru, Sergio; Meleddu, Gianfranco; Deidda, Maria Assunta; Possanzini, Marco; Orrù, Sivia; Lay, Giancarlo

2012-01-01

Purpose: To test tangential and not-tangential hybrid intensity modulated radiation therapy (IMRT) for whole-breast irradiation. Methods and Materials: Seventy-eight (36 right-, 42 left-) breast patients were randomly selected. Hybrid IMRT was performed by direct aperture optimization. A semiautomated method for planning hybrid IMRT was implemented using Pinnacle scripts. A plan optimization volume (POV), defined as the portion of the planning target volume covered by the open beams, was used as the target objective during inverse planning. Treatment goals were to prescribe a minimum dose of 47.5 Gy to greater than 90% of the POV and to minimize the POV and/or normal tissue receiving a dose greater than 107%. When treatment goals were not achieved by using a 4-field technique (2 conventional open plus 2 IMRT tangents), a 6-field technique was applied, adding 2 non tangential (anterior-oblique) IMRT beams. Results: Using scripts, manual procedures were minimized (choice of optimal beam angle, setting monitor units for open tangentials, and POV definition). Treatment goals were achieved by using the 4-field technique in 61 of 78 (78%) patients. The 6-field technique was applied in the remaining 17 of 78 (22%) patients, allowing for significantly better achievement of goals, at the expense of an increase of low-dose (∼5 Gy) distribution in the contralateral tissue, heart, and lungs but with no significant increase of higher doses (∼20 Gy) in heart and lungs. The mean monitor unit contribution to IMRT beams was significantly greater (18.7% vs 9.9%) in the group of patients who required 6-field procedure. Conclusions: Because hybrid IMRT can be performed semiautomatically, it can be planned for a large number of patients with little impact on human or departmental resources, promoting it as the standard practice for whole-breast irradiation.

Space station evolution: Planning for the future

Science.gov (United States)

Diaz, Alphonso V.; Askins, Barbara S.

1987-06-01

The need for permanently manned presence in space has been recognized by the United States and its international partners for many years. The development of this capability was delayed due to the concurrent recognition that reusable earth-to-orbit transportation was also needed and should be developed first. While the decision to go ahead with a permanently manned Space Station was on hold, requirements for the use of the Station were accumulating as ground-based research and the data from unmanned spacecraft sparked the imagination of both scientists and entrepreneurs. Thus, by the time of the Space Station implementation decision in the early 1980's, a variety of disciplines, with a variety of requirements, needed to be accommodated on one Space Station. Additional future requirements could be forecast for advanced missions that were still in the early planning stages. The logical response was the development of a multi-purpose Space Station with the ability to evolve on-orbit to new capabilities as required by user needs and national or international decisions, i.e., to build an evolutionary Space Station. Planning for evolution is conducted in parallel with the design and development of the baseline Space Station. Evolution planning is a strategic management process to facilitate change and protect future decisions. The objective is not to forecast the future, but to understand the future options and the implications of these on today's decisions. The major actions required now are: (1) the incorporation of evolution provisions (hooks and scars) in the baseline Space Station; and (2) the initiation of an evolution advanced development program.

Space station evolution: Planning for the future

Science.gov (United States)

Diaz, Alphonso V.; Askins, Barbara S.

1987-01-01

The need for permanently manned presence in space has been recognized by the United States and its international partners for many years. The development of this capability was delayed due to the concurrent recognition that reusable earth-to-orbit transportation was also needed and should be developed first. While the decision to go ahead with a permanently manned Space Station was on hold, requirements for the use of the Station were accumulating as ground-based research and the data from unmanned spacecraft sparked the imagination of both scientists and entrepreneurs. Thus, by the time of the Space Station implementation decision in the early 1980's, a variety of disciplines, with a variety of requirements, needed to be accommodated on one Space Station. Additional future requirements could be forecast for advanced missions that were still in the early planning stages. The logical response was the development of a multi-purpose Space Station with the ability to evolve on-orbit to new capabilities as required by user needs and national or international decisions, i.e., to build an evolutionary Space Station. Planning for evolution is conducted in parallel with the design and development of the baseline Space Station. Evolution planning is a strategic management process to facilitate change and protect future decisions. The objective is not to forecast the future, but to understand the future options and the implications of these on today's decisions. The major actions required now are: (1) the incorporation of evolution provisions (hooks and scars) in the baseline Space Station; and (2) the initiation of an evolution advanced development program.

The future of food irradiation in the United States

Energy Technology Data Exchange (ETDEWEB)

Durante, R W [Food Safeguards Council Inc., Arlington, VA (United States)

1997-12-01

According to statistics released by the U.S. Public Health Service, between 50 and 80 million cases of foodbome diseases will be contracted by American consumers every year and as many as 10,000 of those will die as a consequence. The World Health Organization and the Commission on World Hunger have estimated that 25 percent of the world`s food supply is lost to spoilage and infestation. The solution for the twin problems of foodbome disease and hunger is food irradiation. Many food when exposed to ionizing radiation produced by radionuclides or electron beam machines will not only experience extended shelf life but most of the harmful pathogens contained on those foods will be destroyed. Food irradiation has been researched and developed for more than 50 years and this technology has been approved by almost every major government agency, including the FDA, the American Medical Association, and the World Health Organization. Irradiated food has been consumed by military personnel, hospital patients and astronauts in space with absolutely no ill effects. Scientists from every technological discipline have endorsed the safety and reliability of this technology and it is currently being utilized in more than 37 countries. Yet it is not used in the United States and food producers who even think about using it are severely criticized and boycotted by anti-nuclear organizations. What do we see as the future of food irradiation in the United States? Will this technology ever be used here? Will there be a time when consumers can feel confident that all the data and facts have been carefully presented on this important and beneficial technology. This paper discusses some of the history of food irradiation and explores problems facing the food industry and the difficulty getting the right message to the public. It also looks at the industry`s efforts to promote food irradiation commerce in the United States, and examines the role government has played in the development of

The future of food irradiation in the United States

International Nuclear Information System (INIS)

Durante, R.W.

1997-01-01

According to statistics released by the U.S. Public Health Service, between 50 and 80 million cases of foodbome diseases will be contracted by American consumers every year and as many as 10,000 of those will die as a consequence. The World Health Organization and the Commission on World Hunger have estimated that 25 percent of the world's food supply is lost to spoilage and infestation. The solution for the twin problems of foodbome disease and hunger is food irradiation. Many food when exposed to ionizing radiation produced by radionuclides or electron beam machines will not only experience extended shelf life but most of the harmful pathogens contained on those foods will be destroyed. Food irradiation has been researched and developed for more than 50 years and this technology has been approved by almost every major government agency, including the FDA, the American Medical Association, and the World Health Organization. Irradiated food has been consumed by military personnel, hospital patients and astronauts in space with absolutely no ill effects. Scientists from every technological discipline have endorsed the safety and reliability of this technology and it is currently being utilized in more than 37 countries. Yet it is not used in the United States and food producers who even think about using it are severely criticized and boycotted by anti-nuclear organizations. What do we see as the future of food irradiation in the United States? Will this technology ever be used here? Will there be a time when consumers can feel confident that all the data and facts have been carefully presented on this important and beneficial technology. This paper discusses some of the history of food irradiation and explores problems facing the food industry and the difficulty getting the right message to the public. It also looks at the industry's efforts to promote food irradiation commerce in the United States, and examines the role government has played in the development of

A simple planning technique of craniospinal irradiation in the eclipse treatment planning system

Directory of Open Access Journals (Sweden)

Hemalatha Athiyaman

2014-01-01

Full Text Available A new planning method for Craniospinal Irradiation by Eclipse treatment planning system using Field alignment, Field-in-Field technique was developed. Advantage of this planning method was also studied retrospectively for previously treated five patients of medulloblastoma with variable spine length. Plan consists of half beam blocked parallel opposed cranium, and a single posterior cervicospine field was created by sharing the same isocenter, which obviates divergence matching. Further, a single symmetrical field was created to treat remaining Lumbosacral spine. Matching between a inferior diverging edge of cervicospine field and superior diverging edge of a Lumbosacral field was done using the field alignment option. ′Field alignment′ is specific option in the Eclipse Treatment Planning System, which automatically matches the field edge divergence as per field alignment rule. Multiple segments were applied in both the spine field to manage with hot and cold spots created by varying depth of spinal cord. Plan becomes fully computerized using this field alignment option and multiple segments. Plan evaluation and calculated mean modified Homogeneity Index (1.04 and 0.1 ensured that dose to target volume is homogeneous and critical organ doses were within tolerance. Dose variation at the spinal field junction was verified using ionization chamber array (I′MatriXX for matched, overlapped and gap junction spine fields; the delivered dose distribution confirmed the ideal clinical match, over exposure and under exposure at the junction, respectively. This method is simple to plan, executable in Record and Verify mode and can be adopted for various length of spinal cord with only two isocenter in shorter treatment time.

Time orientation, planning horizons and responsibility into the future

International Nuclear Information System (INIS)

Svenson, O.; Nilsson, G.

1988-01-01

Subjects of four categories (social science students, engineering students, retired people and nuclear waste experts) were asked about past events, planning, risks and future time with emphasis on energy related issues and in particular questions concerning spent nuclear waste. Among, the results reported it was found that events in the past were located more or less correctly and that events further back systematically too close to the present. Today's responsibility into the future was judged to cover 3 to 6 generations ahead and an adequate planning horizon for a local community to be on the average 11 to 14 years. Adequate planning horizons for the handling of spent nuclear fuel were judged to be from 100 to 500 years. The responsibility for effects of today's decisions was judged to be from about 100 to 300 years into the future for environmental pollution and from about 50 to 600 years for nuclear waste. However, non-negliqable proportions of the subjects choose a more moral standpoint and gave answers indicating that responsibility had to be unlimited. Some sex differences were found and an interaction with age offered as a hypothesis to be investigated in the future. Interrelations between clusters of questions revealed some links from past time and planning to judgements of environmental and nuclear power related risks. (orig.)

Mechanical Tests Plan after Neutron Irradiation for SMART SG Tube Materials in a Hot Cell

International Nuclear Information System (INIS)

Ahn, Sang Bok; Baik, Seung Jai; Kim, Do Sik; Yoo, Byung Ok; Jung, Yang Hong; Song, Woong Sub; Choo, Kee Nam; Park, Jin Seok; Lee, Yong Sun; Ryu, Woo Seog

2010-01-01

An advanced integral PWR, SMART (System- Integrated Modular Advanced ReacTor) is being developed in KAERI. It has compact size and a relatively small power rating compared to a conventional reactor. The main components such as the steam generators, main circulation pumps are located in the reactor vessel. Therefore they are damaged from neutron irradiations generated from nuclear fuel fissions during operation. The SMART SG tubes which are 17 mm in a diameter and 2.5 mm in a thickness will be made of Alloy 690. To ensure the operation safety the post irradiation examinations is necessary to evaluate the deterioration levels of various original properties. Specially the amount of mechanical properties change should be reflected and revised to design data. For that tensile, fracture, hardness test are planned and under preparations. In this paper the detailed plans are reviewed. Three kinds of materials having different heat treatment procedures are prepared to fabricate specimens. The capsules installed the specimens are going to be irradiated in HANARO. Finally the tests for them will be performed in IMEF, Irradiated Materials Examination Facility at KAERI

Irradiation testing of LEU fuels in the SILOE Reactor - Progress report

International Nuclear Information System (INIS)

Merchie, Francis; Baas, Claude; Martel, Patrick

1985-01-01

Irradiation of uranium-silicide fuels has continued in the SILOE reactor during the past year. Thickness vs. fission density data from four U 3 Si plates containing 5.5 and 6.0 g U/cm 3 have been analyzed, and the results are presented. The irradiation of a full 60 g U/cm 3 U 3 Si element has begun. In addition, four U 3 Si 2 plates containing 20 to 54 g U/cm 3 are now being irradiated. These irradiations and future plans are discussed in the paper. (author)

ANSTO's future plans for nuclear science and technology

International Nuclear Information System (INIS)

Blackburne, I.

2003-01-01

There are four key themes in ANSTO's future plans for nuclear science and technology: 1) ANSTO plans for the future - within its established 'core business areas', following a rigorous process, and incorporating extensive interaction with organisations around Australia and overseas. 2) The replacement research reactor (RRR) - a Major National Research Facility and the cornerstone of ANSTO's future activities. 3) A number of business development initiatives that have been launched by ANSTO over the past year, under the banner of Good science is good business at ANSTO. 4) ANSTO involvement in the national research priorities that the Prime Minister announced last December, in particular, by pursuing new research in the security and forensics area; its contribution to the 'Safeguarding Australia' national research priority. The Replacement Research Reactor now under construction will make an enormous difference to the work that ANSTO can undertake, and that others can perform using ANSTO's facilities

Minutes of the workshop on bases of in-pile irradiation tests

International Nuclear Information System (INIS)

1997-03-01

The Workshop on Bases of In-pile Irradiation Tests was held on January 29th and 30th, 1997 at the Ibarakiken Sangyo Kaikan in Mito, Ibaraki. The purpose is to discuss upgrading an in-pile irradiation test, promoting the utilization of the research and testing reactors and also activating the research potential of JAERI transversely. Main topics are the role and future plan of the research and testing reactors, a challenge to an advanced irradiation test, development of peripheral techniques for irradiation tests and future trends of the in-pile irradiation test in the 21st century. It was mainly pointed out that the in-pile irradiation test based on an analytical method using interpolation and extrapolation procedures met a turning point and that the upgrading of the irradiation and testing method should be indispensable for regaining the latest frontiers of an irradiation study using the research and testing reactors. The new concepts were also proposed on the irradiation correlation and modeling for the design of innovative materials. It was also recognized the key issues of the irradiation study in future should be an advanced irradiation testing method which can combine various types of irradiation field and control the irradiation conditions freely. In the next century in which large accelerator or new neutron source competes with research and testing reactors for neutron irradiation tests, themes of research using in-pile irradiation tests will be upgrading of the light water reactor, development of fusion reactor, basic research, biological and medical research, radioisotope production and semiconductors manufacturing, etc. It was also concluded the research and testing reactors will keep their main role in neutron irradiation research in future. This report briefly summarizes the content of 16 presentations and the discussion. The result of the questionnaires on the utilization of research and testing reactors to the participants is also attached. (J.P.N.)

A treatment planning comparison of two different 3D conformal techniques for irradiation of head and neck cancer patients

International Nuclear Information System (INIS)

Krstevska, Valentina; Lukarski, Dusko; Petkovska, Sonja

2010-01-01

The purpose of this treatment planning study was to compare two different three dimensional conformal irradiation techniques for head and neck cancer patients. For 33 patients with head and neck carcinoma, irradiated according to the classical technique, we computed and evaluated a second irradiation technique in order to optimize the treatment planning protocol. The classical technique, termed 'electron-photon fields', employed two lateral semi-fields (23 fractions) for irradiation of the upper part of the planning target volume that should receive 50 Gy (PTV50) and an anterior and posterior field for the lower part. After the 23rd fraction the lateral fields were reduced from the dorsal side (2 fractions), in order to exclude the spinal cord from them. At the same time the dose to the shielded part of the target volume was delivered with matched electron fields. Finally, after the 25th fraction, the high risk volume was irradiated to the desired dose with plan where the spinal cord was completely shielded. In the new technique, termed 'oblique photon fields', 4 oblique isocentric photon fields were used (25 fractions): two anterior fields that covered the entire target volume that should receive 50 Gy and two posterior fields that covered only half of the target volume in order to shield the spinal cord. Thus, the necessity for using electron fields is eliminated. We kept the plan for irradiation of the high risk planning target volume the same as in the classical technique. The prescribed dose per fraction in all plans was 2 Gy. In both techniques the plans were optimized to the same maximal point dose and the same dose to the spinal cord. The oblique fields plan showed better coverage and homogeneity of the PTV50, except for the patients with positive resection margins receiving postoperative radiotherapy (receiving 66 Gy), where the coverage did not differ significantly. The conformity in both techniques did not differ significantly. The mean dose to the

Planning for a Nondriving Future: Behaviors and Beliefs Among Middle-Aged and Older Drivers.

Science.gov (United States)

Harmon, Annie C; Babulal, Ganesh; Vivoda, Jonathon M; Zikmund-Fisher, Brian J; Carr, David B

2018-01-01

Despite the reality of older adults living many years after driving cessation, few prepare for the eventuality; empirically, planning for a nondriving future has not been directly quantified or explored. The following study quantifies 1) the extent of current drivers' planning, 2) specific planning behaviors, 3) beliefs about benefits of planning, 4) drivers' intention to plan more for future transportation needs, and 5) group differences associated with planning. In a predominantly female, black, urban sample of current drivers ages 53-92, fewer than half (42.1%) had planned at all for a nondriving future, with correspondingly low levels of planning behaviors reported. However, over 80% believed planning would help them meet their needs post-cessation and transition emotionally to being a nondriver. Most (85%) intended to plan more in the future as well, indicating further potential openness to the topic. Drivers who planned were older, drove less frequently, limited their driving to nearby places, reported less difficulty believing they would become a nondriver, and expected to continue driving three years less than non-planners. These findings suggest that drivers' perceived nearness to driving cessation impacts planning for future transportation needs, and existing perceived benefits of planning may provide leverage to motivate action.

Future Plans for the ACORNE Collaboration

International Nuclear Information System (INIS)

Thompson, Lee F

2007-01-01

A summary of the future plans for ACORNE collaboration are presented. Of particular note is the intended development of an acoustic calibrator to be deployed in the deep sea above the Rona hydrophone array. Crucial to this goal is work recently completed on the understanding of hydrophone response and the generation of bipolar acoustic signals; this work is presented in detail

Designing Targets for Elective Nodal Irradiation in Lung Cancer Radiotherapy: A Planning Study

International Nuclear Information System (INIS)

Kepka, Lucyna; Tatro, Daniel; Moran, Jean M.; Quint, Leslie E.; Hayman, James A.; Ten Haken, Randall K.; Kong Fengming

2009-01-01

Purpose: To assess doses received by mediastinal and hilar lymph node stations (LNS) delineated according to published recommendations when 'standard' two-dimensional (2D) elective fields are applied and to assess doses to critical structures when fields are designed using 2D and three-dimensional (3D) treatment planning for elective irradiation. Methods and Materials: LNS were delineated on axial CT scans according to existing recommendations. For each case and tumor location, 2D anteroposterior-posteroanterior (AP-PA) elective fields were applied using the AP-PA CT topograms. From the 2D portal fields, 3D dose distributions were then calculated to particular LNS. Next, 3D plans were prepared for elective nodal irradiation for tumors of different lobes. Doses for critical structures were compared for 2D and 3D plans. Results: LNS 1/2R, 1/2L, 3A, 3P, 5, 6, and 8 were not adequately covered in a substantial part of plans by standard 2D portals when guidelines for delineation were strictly followed. The magnitude of the lack of coverage increased with margin application. There was a trend for a higher yet probably still safe dose delivered to lung for 3D plans compared with 2D plans with a prescription dose of 45 Gy. Conclusions: 2D fields did not entirely cover LNS delineated according to the recommendations for 3D techniques. A strict adherence to these guidelines may lead to larger portals than traditionally constructed using 2D methods. Some modifications for clinical implementation are discussed.

Investigation of reactivity between SiC and Nb-1Zr in planned irradiation creep experiments

Energy Technology Data Exchange (ETDEWEB)

Lewinsohn, C.A.; Hamilton, M.L.; Jones, R.H.

1997-08-01

Thermodynamic calculations and diffusion couple experiments showed that SiC and Nb-1Zr were reactive at the upper range of temperatures anticipated in the planned irradiation creep experiment. Sputter-deposited aluminum oxide (Al{sub 2}O{sub 3}) was selected as a diffusion barrier coating. Experiments showed that although the coating coarsened at high temperature it was an effective barrier for diffusion of silicon from SiC into Nb-1Zr. Therefore, to avoid detrimental reactions between the SiC composite and the Nb-1Zr pressurized bladder during the planned irradiation creep experiment, a coating of Al{sub 2}O{sub 3} will be required on the Nb-1Zr bladder.

Present and future of food irradiation in China

International Nuclear Information System (INIS)

Chen Hao; Cai Jiming; Pan Pingchuan; Liu Ge

2006-01-01

The treatment of foods and agricultural products by irradiation technology in China has become an increasingly accepted practice and has been recognized as a public health intervention measure for controling pathogenic microbes and pests on foods since early 1980s. This paper gives an outline on the history and the current status of food irradiation in China, including the research interest, commercial application, public acceptance, regulations and hygienic standards of irradiated foods, and the irradiation facilities for food irradiation. The newly finished or scheduled irradiation facilities in China up to 2007 are introduced. And problems with the food irradiation studies, especially in analysis of food quality during irradiation, the implementation of GMP and HACCP in the food irradiation production and harmonization of food irradiation regulations with international standards, are also discussed. (authors)

SU-C-BRB-03: Cross-Institutional Validation of An Ultrafast Automatic Planning Platform for Breast Irradiation

International Nuclear Information System (INIS)

Li, T; Lockamy, V; Anne, P; Simone, N; Yu, Y; Sheng, Y; Wu, QJ

2016-01-01

Purpose: Recently an ultrafast automatic planning system for breast irradiation using tangential beams was developed by modeling relationships between patient anatomy and achieved dose distribution. This study evaluates the performance of this system when applied to a different patient population and dose calculation algorithm. Methods: The system and its anatomy-to-dose models was developed at institution A based on 20 cases, which were planned using manual fluence painting technique and calculated WITH heterogeneity correction. Institution B uses field-in-field planning technique and dose calculation WITHOUT heterogeneity correction. 11 breast cases treated at Institution B were randomly selected for retrospective study, including left and right sides, and different breast size (irradiated volumes defined by Jaw/MLC opening range from 875cc to 3516cc). Comparisons between plans generated automatically (Auto-Plans) and those used for treatment (Clinical-Plans) included: energy choice (single/mixed), volumes receiving 95%/100%/105%/110% Rx dose (V95%/V100%/V105%/V100%) relative to irradiated volume, D1cc, and LungV20Gy. Results: In 9 out of 11 cases single/mixed energy choice made by the software agreed with Clinical-Plans. For the remaining 2 cases software recommended using mixed energy and dosimetric improvements were observed. V100% were similar (p=0.223, Wilcoxon Signed-Rank test) between Auto-Plans and Clinical-Plans (57.6±8.9% vs. 54.8±9.5%). V95% is 2.3±3.0% higher for Auto-Plans (p=0.027), indicating reduced cold areas. Hot spot volume V105% were significantly reduced in Auto-Plan by 14.4±7.2% (p=0.004). Absolute V105% was reduced from 395.6±359.9cc for Clinical-Plans to 108.7±163cc for Auto-Plans. D1cc was 107.4±2.8% for Auto-Plans, and 109.2±2.4% for Clinical-Plans (p=0.056). LungV20Gy were 13.6±4.0% for Auto-Plan vs. 14.0±4.1% for Clinical-Plans (p=0.043). All optimizations were finished within 1.5min. Conclusion: The performance of this

SU-C-BRB-03: Cross-Institutional Validation of An Ultrafast Automatic Planning Platform for Breast Irradiation

Energy Technology Data Exchange (ETDEWEB)

Li, T; Lockamy, V; Anne, P; Simone, N; Yu, Y [Thomas Jefferson University, Philadelphia, PA (United States); Sheng, Y; Wu, QJ [Duke University, Durham, NC (United States)

2016-06-15

Purpose: Recently an ultrafast automatic planning system for breast irradiation using tangential beams was developed by modeling relationships between patient anatomy and achieved dose distribution. This study evaluates the performance of this system when applied to a different patient population and dose calculation algorithm. Methods: The system and its anatomy-to-dose models was developed at institution A based on 20 cases, which were planned using manual fluence painting technique and calculated WITH heterogeneity correction. Institution B uses field-in-field planning technique and dose calculation WITHOUT heterogeneity correction. 11 breast cases treated at Institution B were randomly selected for retrospective study, including left and right sides, and different breast size (irradiated volumes defined by Jaw/MLC opening range from 875cc to 3516cc). Comparisons between plans generated automatically (Auto-Plans) and those used for treatment (Clinical-Plans) included: energy choice (single/mixed), volumes receiving 95%/100%/105%/110% Rx dose (V95%/V100%/V105%/V100%) relative to irradiated volume, D1cc, and LungV20Gy. Results: In 9 out of 11 cases single/mixed energy choice made by the software agreed with Clinical-Plans. For the remaining 2 cases software recommended using mixed energy and dosimetric improvements were observed. V100% were similar (p=0.223, Wilcoxon Signed-Rank test) between Auto-Plans and Clinical-Plans (57.6±8.9% vs. 54.8±9.5%). V95% is 2.3±3.0% higher for Auto-Plans (p=0.027), indicating reduced cold areas. Hot spot volume V105% were significantly reduced in Auto-Plan by 14.4±7.2% (p=0.004). Absolute V105% was reduced from 395.6±359.9cc for Clinical-Plans to 108.7±163cc for Auto-Plans. D1cc was 107.4±2.8% for Auto-Plans, and 109.2±2.4% for Clinical-Plans (p=0.056). LungV20Gy were 13.6±4.0% for Auto-Plan vs. 14.0±4.1% for Clinical-Plans (p=0.043). All optimizations were finished within 1.5min. Conclusion: The performance of this

WIN Chapters: Milestones and Future Plans

Energy Technology Data Exchange (ETDEWEB)

Castro, P.; Pelegrí, M.

2015-07-01

In this paper the WIN Chapters: milestones and future plans are presented. WIN-IAEA has rewarded-in the three last years - to Australia-2014, South-Africa-2013 and Sweden-2012. WIN-Global -specially WiN IAEA- can collaborate a lot with the CTBTO presenting the content of the Treaty on the Non-Proliferation of Nuclear Weapons actually increasing the signatory members in 2015. Historical decisions on NTP are already affecting WiN IAEA. The research reactors or high flux reactors are important in the field of medical applications and other future applications. In Australia women-scientist of OPAL, can become WiN. Between the OPAL applications there is a production of silicon plates to be used in laptops/mobiles. WIN-Europe activities related with the climatic change and with the academic promotion. 2015 is also a very important year due the celebration of 20th Anniversary of WIN-Spain; plans of this Chapter and Conferences of WIN-Global are presented. In addition there are women working in ITER, in some activities in the EU, China, India, Japan, South Korea, USA and Russia both in the academic (R+D) field and into the Industry. (Author)

Weather, climate and the future : B.C.'s plan

International Nuclear Information System (INIS)

2004-12-01

This plan lays the groundwork for a comprehensive long-term response to climate change in British Columbia (BC). Three key objectives were identified: decreasing greenhouse gas (GHG) emissions and reducing vulnerability to future climate change; contributing to BC's economic revitalization by improving energy efficiency and supporting development of market opportunities; and ensuring BC's interests are protected in the implementation of national climate policies. A summary of actions was provided in the areas of sustainable energy production and sustainable forest management. Outlines of the government's plans to provide support to the BC Agriculture Council were also provided along with plans concerning infrastructure and the ways in which climate change will be incorporated into transportation planning and investment strategies. A list of government leadership and outreach actions was given, as well as details of water management plans. It was concluded that further policy developments will be required in incremental forest sinks, energy efficiency, bioenergy and fuel cell technology. Improved urban development and performance targets are necessary for public buildings. It was noted that regulatory changes to provide further incentives in these areas are necessary. Partnerships between the private sector, federal, local and regional governments will be essential for the future success of this plan. tabs., figs

A comparative study of standard intensity-modulated radiotherapy and RapidArc planning techniques for ipsilateral and bilateral head and neck irradiation

Energy Technology Data Exchange (ETDEWEB)

Pursley, Jennifer, E-mail: jpursley@mgh.harvard.edu [Department of Radiation Oncology, Dana-Farber Cancer Institute/Brigham and Women' s Hospital, Boston, MA (United States); Department of Radiation Oncology, Massachusetts General Hospital, Boston, MA (United States); Damato, Antonio L.; Czerminska, Maria A.; Margalit, Danielle N. [Department of Radiation Oncology, Dana-Farber Cancer Institute/Brigham and Women' s Hospital, Boston, MA (United States); Sher, David J. [Department of Radiation Oncology, Dana-Farber Cancer Institute/Brigham and Women' s Hospital, Boston, MA (United States); Department of Radiation Oncology, UT Southwestern Medical Center, Dallas, TX (United States); Tishler, Roy B. [Department of Radiation Oncology, Dana-Farber Cancer Institute/Brigham and Women' s Hospital, Boston, MA (United States)

2017-04-01

The purpose of this study was to investigate class solutions using RapidArc volumetric-modulated arc therapy (VMAT) planning for ipsilateral and bilateral head and neck (H&N) irradiation, and to compare dosimetric results with intensity-modulated radiotherapy (IMRT) plans. A total of 14 patients who received ipsilateral and 10 patients who received bilateral head and neck irradiation were retrospectively replanned with several volumetric-modulated arc therapy techniques. For ipsilateral neck irradiation, the volumetric-modulated arc therapy techniques included two 360° arcs, two 360° arcs with avoidance sectors around the contralateral parotid, two 260° or 270° arcs, and two 210° arcs. For bilateral neck irradiation, the volumetric-modulated arc therapy techniques included two 360° arcs, two 360° arcs with avoidance sectors around the shoulders, and 3 arcs. All patients had a sliding-window-delivery intensity-modulated radiotherapy plan that was used as the benchmark for dosimetric comparison. For ipsilateral neck irradiation, a volumetric-modulated arc therapy technique using two 360° arcs with avoidance sectors around the contralateral parotid was dosimetrically comparable to intensity-modulated radiotherapy, with improved conformity (conformity index = 1.22 vs 1.36, p < 0.04) and lower contralateral parotid mean dose (5.6 vs 6.8 Gy, p < 0.03). For bilateral neck irradiation, 3-arc volumetric-modulated arc therapy techniques were dosimetrically comparable to intensity-modulated radiotherapy while also avoiding irradiation through the shoulders. All volumetric-modulated arc therapy techniques required fewer monitor units than sliding-window intensity-modulated radiotherapy to deliver treatment, with an average reduction of 35% for ipsilateral plans and 67% for bilateral plans. Thus, for ipsilateral head and neck irradiation a volumetric-modulated arc therapy technique using two 360° arcs with avoidance sectors around the contralateral parotid is

Demographic Analysis and Planning for the Future. No. 13.

Science.gov (United States)

Efird, Cathy M.

The basic sources and types of demographic data available for future planning for the developmentally disabled are reviewed and a frame work for data organization is suggested. It is explained that future forecasts may be undertaken by the following principles: trend forecasting or extrapolation; scenario construction; models, games, and…

Two-dimensional versus three-dimensional treatment planning of tangential breast irradiation

International Nuclear Information System (INIS)

Damen, E.M.F.; Bruinvis, I.A.D.; Mijnheer, B.J.

1995-01-01

Purpose: Full three-dimensional (3-D) treatment planning requires 3-D patient contours and density information, derived either from CT scanning or from other 3-D contouring methods. These contouring techniques are time consuming, and are often not available or cannot be used. Two-dimensional (2-D) treatment planning can be performed using only a few patient contours, made with much simpler techniques, in combination with simulator images for estimating the lung position. In order to investigate the need for full 3-D planning, we compared the performance of both a 2-D and a 3-D planning system in calculating absolute dose values and relative dose distributions in tangential breast irradiation. Methods: Two breast-shaped phantoms were used in this study. The first phantom consists of a polyethylene mould, filled with water and cork to mimic the lung. An ionization chamber can be inserted in the phantom at fixed positions. The second phantom is made of 25 transverse slices of polystyrene and cork, made with a computerized milling machine from CT information. In this phantom, films can be inserted in three sagittal planes. Both phantoms have been irradiated with two tangential 8 MV photon beams. The measured dose distribution has been compared with the dose distribution predicted by the two planning systems. Results: In the central plane, the 3-D planning system predicts the absolute dose with an accuracy of 0.5 - 4%. The dose at the isocentre of the beams agrees within 0.5% with the measured dose. The 2-D system predicts the dose with an accuracy of 0.9 - 3%. The dose calculated at the isocentre is 2.6% higher than the measured dose, because missing lateral scatter is not taken into account in this planning system. In off-axis planes, the calculated absolute dose agrees with the measured dose within 4% for the 2-D system and within 6% for the 3-D system. However, the relative dose distribution is predicted better by the 3-D planning system. Conclusions: This study

Physico-technical irradiation planning for the therapy of oesophagus carcinomas by means of computed whole-body tomography

International Nuclear Information System (INIS)

Ammon, J.; Greiner, K.; Kaesberg, P.

1980-01-01

It is particularly difficult to establish a physico-technical irradiation plan for the thoracic part of an oesophagus carcinoma. This is due to the considerable modifications of the thoracic cross-section within the longitudinal axis of the radiation field. Therefore, tomographic cross-sections were made of the upper, the middle and the lower plane of the radiation field. The percentage dose distributions could be determined with a process computer (system TPS, Philips) for different irradiation techniques and irradiation equipments. Examinations of 21 patients showed that the best dose distribution, i.e. a distribution which spares the lung and spinal marrow regions adjacent to the target volume, is obtained by an excentric moving field therapy. Furthermore, localisation and dimensions of inhomogeneities are indicated by computer tomography which makes possible to take into consideration these inhomogeneities when calculating the dose. It was found that the irradiation times can so be reduced by more than 20%. We are therefore of the opinion that it is necessary to establish individual cross-sections of the body by computed tomography when elaborating a physico-technical irradiation plan for the treatment of an oesophagus carcinoma. (orig.) [de

Status and future of food irradiation research project

International Nuclear Information System (INIS)

Fujimaki, Masao

1982-01-01

The first part of the report presented the results of wholesomeness evaluation of the irradiated potato, onion, rice and wheat by Organization of the National Research Programme on Food Irradiation which conducts food irradiation in Japan. The second part dealt with the wholesomeness evaluation of food irradiation by the joint specialist conference of FAO, IAEA and WHO. It was concluded that irradiation of a maximum mean of 10 KGy or less was unconditionally permissible for every food item, not requiring a toxicity test. However, the relationship between irradiation techniques and economic feasibility, wholesomeness of high dose irradiation, the human effect of use of irradiated food item, food chemistry and nutritional problems remain to be examined. (Chibe, N.)

Planning Schools for the Future. Publication No. BM-1.

Science.gov (United States)

Weinberger, JoAnn

In a three-year study, Research for Better Schools (RBS) was asked by the National Institute of Education to identify, analyze, and verify definitive social changes forecast for the decades ahead, and to project their implications for schools of the future. RBS reviewed the literature to extract future planning needs relevant to educational…

Planning a new research reactor for AECL: The MAPLE-MTR concept

International Nuclear Information System (INIS)

Lee, A.G.; Lidstone, R.F.; Donnelly, J.V.

1992-01-01

AECL Research is assessing its needs and options for future irradiation research facilities. A planning team has been assembled to identify the irradiation requirements for AECL's research programs and compile options for satisfying the irradiation requirements. The planning team is formulating a set of criteria to evaluate the options and will recommend a plan for developing an appropriate research facility. Developing the MAPLE Materials Test Reactor (MAPLE-MTR) concept to satisfy AECL's irradiation requirements is one option under consideration by the planning team. AECL is undertaking this planning phase because the NRU reactor is 35 years old and many components are nearing the end of their design life. This reactor has been a versatile facility for proof testing CANDU components and fuel designs because the CANDU irradiation environment was simulated quite well. However, the CANDU design has matured and the irradiation requirements have changed. Future research programs will emphasize testing CANDU components near or beyond their design limits. To provide these irradiation conditions, the NRU reactor needs to be upgraded. Upgrading and refurbishing the NRU reactor is being considered, but the potentially large costs and regulatory uncertainties make this option very challenging. AECL is also developing the MAPLE-MTR concept as a potential replacement for the NRU reactor. The MAPLE-MTR concept starts from the recent MAPLE-X10 design and licensing experience and adapts this technology to satisfy the primary irradiation requirements of AECL's research programs. This approach should enable AECL to minimize the need for major advances in nuclear technology (e.g., fuel design, heat transfer). The preliminary considerations for developing the MAPLE-MTR concept are presented in this report. A summary of AECL's research programs is presented along with their irradiation requirements. This is followed by a description of safety criteria that need to be taken into

Energy future Santa Cruz: A citizens' plan for energy self-reliance

Science.gov (United States)

Cohn, J.; Stayton, R.

The results of a grassroots energy conservation project which involved more than 3,100 residents of Santa Cruz, California, is discussed. Citizens attended forums and town meetings to suggest ideas for solving the community's energy problems. These ideas were then evaluated by the Energy Future Advisory Board and compiled into the Energy Future Plan. The energy plan covers such topics as new residences, residential retrofit, automobile efficiency, farm efficiency, commercial greenhouses, local food production, commercial efficiency, land use planning, energy education and financing, and solar, wind, and ocean energy. An energy implementation guide and glossary are included.

Optimism and Planning for Future Care Needs among Older Adults

Science.gov (United States)

Sörensen, Silvia; Hirsch, Jameson K.; Lyness, Jeffrey M.

2015-01-01

Aging is associated with an increase in need for assistance. Preparation for future care (PFC) is related to improved coping ability as well as better mental and physical health outcomes among older adults. We examined the association of optimism with components of PFC among older adults. We also explored race differences in the relationship between optimism and PFC. In Study 1, multiple regression showed that optimism was positively related to concrete planning. In Study 2, optimism was related to gathering information. An exploratory analysis combining the samples yielded a race interaction: For Whites higher optimism, but for Blacks lower optimism was associated with more planning. High optimism may be a barrier to future planning in certain social and cultural contexts. PMID:26045699

Fabrication, inspection, and test plan for the Advanced Test Reactor (ATR) Mixed-Oxide (MOX) fuel irradiation project

International Nuclear Information System (INIS)

Wachs, G.W.

1997-11-01

The Department of Energy (DOE) Fissile Materials Disposition Materials Disposition Program (FMDP) has announced that reactor irradiation of MOX fuel is one of the preferred alternatives for disposal of surplus weapons-usable plutonium (Pu). MOX fuel has been utilized domestically in test reactors and on an experimental basis in a number of Commercial Light Water Reactors (CLWRs). Most of this experience has been with Pu derived from spent low enriched uranium (LEU) fuel, known as reactor grade (RG) Pu. The MOX fuel test will be irradiated in the ATR to provide preliminary data to demonstrate that the unique properties of surplus weapons-derived or weapons-grade (WG) plutonium (Pu) do not compromise the applicability of this MOX experience base. In addition, the test will contribute experience with irradiation of gallium-containing fuel to the data base required for resolution of generic CLWR fuel design issues (ORNL/MD/LTR-76). This Fabrication, Inspection, and Test Plan (FITP) is a level 2 document as defined in the FMDP LWR MOX Fuel Irradiation Test Project Plan (ORNL/MD/LTR-78)

Dosimetric validation of planning system Eclipse 10 in partial breast irradiation treatments with IMRT

International Nuclear Information System (INIS)

Velazquez T, J. J.; Gutierrez M, J. G.; Ortiz A, C. S.; Chagoya G, A.; Gutierrez C, J. G.

2015-10-01

Partial breast irradiation is a new type of external radiation therapy to treat breast cancer in early clinical stages. Consist of administering to the channel surgical high doses of radiation in few treatment sessions. In this paper the dose calculations of the planning system Eclipse version 10 for a treatment of partial breast irradiation with X-rays beams (6 MV) intensity modulated were compared against the measurements made with OSL dosimeters and radio-chromic dye film. An anthropomorphic mannequin was used in which OSL dosimeters were collocated near the surface, an inside the radio-chromic dye film one plate; with this latest one dimensional dose distribution was measured. Previously dosimeters were calibrated irradiating them with a beam of X-rays 6 MV under the conditions specified in the IAEA-398 protocol. The OSL dosimeters were read in the Micro star Landauer equipment, the radio-chromic dye films were read with a scanner Epson 10000-Xl and analyzed with FilmCal and PTW Verisoft programs. The differences between measured and calculated dose were as follows: 3.6±1% for the OSL dosimeter and 96.3±1% of the analyzed points approved the gamma index criterion (3%, 3m m) when comparing the matrices of calculated dose and measured with the radio-chromic dye film. These results confirm the good dosimetric performance of planning system used under specific conditions used in the partial breast irradiation technique. (Author)

Development of breast cancer irradiation technique for BNCT at JRR-4

International Nuclear Information System (INIS)

Nakamura, Takemi; Horiguchi, Hironori; Arai, Masaji; Yanagie, Hironobu

2014-06-01

In the Department of Research Reactor and Tandem Accelerator, developments of irradiation technique with application enlargement for breast cancer on BNCT have been performed in the second medium term plans. We compiled this report about the technological development to solve several problems with the irradiation of breast cancer in the medical irradiation facility of JRR-4. In the present study, design fabrication of a collimator for breast cancer, dose evaluation analysis by clinical model, investigation of dose enhancement at deeper region and investigation of fixing method for breast cancer irradiation were studied. By these evaluation results, we verified that the developed breast cancer irradiation technique can be applied to BNCT medical irradiation of JRR-4. These results are expected to be able to contribute to breast cancer irradiation techniques of other reactor-based BNCT and future accelerator-based BNCT. (author)

Continuing the Total and Spectral Solar Irradiance Climate Data Record

Science.gov (United States)

Coddington, O.; Pilewskie, P.; Kopp, G.; Richard, E. C.; Sparn, T.; Woods, T. N.

2017-12-01

Radiative energy from the Sun establishes the basic climate of the Earth's surface and atmosphere and defines the terrestrial environment that supports all life on the planet. External solar variability on a wide range of scales ubiquitously affects the Earth system, and combines with internal forcings, including anthropogenic changes in greenhouse gases and aerosols, and natural modes such as ENSO, and volcanic forcing, to define past, present, and future climates. Understanding these effects requires continuous measurements of total and spectrally resolved solar irradiance that meet the stringent requirements of climate-quality accuracy and stability over time. The current uninterrupted 39-year total solar irradiance (TSI) climate data record is the result of several overlapping instruments flown on different missions. Measurement continuity, required to link successive instruments to the existing data record to discern long-term trends makes this important climate data record susceptible to loss in the event of a gap in measurements. While improvements in future instrument accuracy will reduce the risk of a gap, the 2017 launch of TSIS-1 ensures continuity of the solar irradiance record into the next decade. There are scientific and programmatic motivations for addressing the challenges of maintaining the solar irradiance data record beyond TSIS-1. The science rests on well-founded requirements of establishing a trusted climate observing network that can monitor trends in fundamental climate variables. Programmatically, the long-term monitoring of solar irradiance must be balanced within the broader goals of NASA Earth Science. New concepts for a low-risk, cost efficient observing strategy is a priority. New highly capable small spacecraft, low-cost launch vehicles and a multi-decadal plan to provide overlapping TSI and SSI data records are components of a low risk/high reliability plan with lower annual cost than past implementations. This paper provides the

Sci—Thur PM: Planning and Delivery — 04: Respiratory margin derivation and verification in partial breast irradiation

International Nuclear Information System (INIS)

Quirk, S; Conroy, L; Smith, WL

2014-01-01

Partial breast irradiation (PBI) following breast-conserving surgery is emerging as an effective means to achieve local control and reduce irradiated breast volume. Patients are planned on a static CT image; however, treatment is delivered while the patient is free-breathing. Respiratory motion can degrade plan quality by reducing target coverage and/or dose homogeneity. A variety of methods can be used to determine the required margin for respiratory motion in PBI. We derive geometric and dosimetric respiratory 1D margin. We also verify the adequacy of the typical 5 mm respiratory margin in 3D by evaluating plan quality for increasing respiratory amplitudes (2–20 mm). Ten PBI plans were used for dosimetric evaluation. A database of volunteer respiratory data, with similar characteristics to breast cancer patients, was used for this study. We derived a geometric 95%-margin of 3 mm from the population respiratory data. We derived a dosimetric 95%-margin of 2 mm by convolving 1D dose profiles with respiratory probability density functions. The 5 mm respiratory margin is possibly too large when 1D coverage is assessed and could lead to unnecessary normal tissue irradiation. Assessing margins only for coverage may be insufficient; 3D dosimetric assessment revealed degradation in dose homogeneity is the limiting factor, not target coverage. Hotspots increased even for the smallest respiratory amplitudes, while target coverage only degraded at amplitudes greater than 10 mm. The 5 mm respiratory margin is adequate for coverage, but due to plan quality degradation, respiratory management is recommended for patients with respiratory amplitudes greater than 10 mm

FutureTDM Communication and Exploitation Plan

OpenAIRE

Frew, Helen

2016-01-01

This report is designed to meet the overall objective of FutureTDM – to identify and remove TDM uptake barriers in the EU through an effective and sustainable communications strategy. It sets out a strategy to engage, to inform (showing our expertise), to be accessible and to be relevant now and post project end date. The plan explains how we are going to communicate the project, offering options both on‐line and in person, with user friendly language and a recognisable slogan...

Planning for the Future, a Look from Apollo to the Present

Science.gov (United States)

Segrera, David

2008-01-01

Future missions out of low Earth orbit, returning to the moon and Mars, will be some of the most complicated endeavors ever attempted by mankind. It will require the wealth of nations and the dedicated efforts of thousand of individuals working in a concerted effort to take man to the moon, Mars and beyond. These missions will require new equipment and new approaches to optimize our limited resources and time in space. This daily planning and optimization which currently is being performed by scores of people in MCC Houston and around the world will need to adapt to the challenges faced far from Earth. By studying the processes, methodologies, and tools employed from Apollo, Skylab, Shuttle, ISS, and other programs such as NEEMO, we can learn from the past to plan for the future. This paper will explore the planning process used from Apollo onward and will discuss their relevancy in future applications.

Future of external beam irradiation as initial treatment of rectal cancer

Energy Technology Data Exchange (ETDEWEB)

Papillon, J.

1987-06-01

The authors' protocol consists of a split-course regimen with a short course of cobalt-60 arc rotation (3000 c/Gy in 12 days). After 2 months rest, the second stage treatment depends upon the pressure of residual disease and the tumour site. It consists of either radical surgery (82 cases) or conservative treatment by intracavitary irradiation in the event of a favourable initial response or in the case of poor risk patients (73 cases). In the radiotherapy-surgical group, the subsequent operative specimens were tumour free in 17% of cases and assigned to Dukes' A category in 32% of cases. Of 91 patients with T/sub 2/ or T/sub 3/ tumour involving the lower third of the rectum (followed up for more than 3 years) 72(84%) had no recurrence. Thirty-three of these patients (46%) underwent a colostomy while 39 (54%) has normal anal function. These results demonstrate the major place that a properly planned external beam irradiation can have in the curative management of cancers of the low rectum.

Does selective pleural irradiation of malignant pleural mesothelioma allow radiation dose escalation. A planning study

Energy Technology Data Exchange (ETDEWEB)

Botticella, A.; Defraene, G. [KU Leuven - University of Leuven, Department of Oncology, Experimental Radiation Oncology, Leuven (Belgium); Nackaerts, K. [KU Leuven - University of Leuven, University Hospitals Leuven, Department of Respiratory Medicine, Leuven (Belgium); Deroose, C. [KU Leuven - University of Leuven, University Hospitals Leuven, Nuclear Medicine, Leuven (Belgium); Coolen, J. [KU Leuven - University of Leuven, University Hospitals Leuven, Radiology Department, Leuven (Belgium); Nafteux, P. [University Hospitals Leuven, Department of Thoracic Surgery, Leuven (Belgium); Vanstraelen, B. [University Hospitals Leuven, Department of Radiation Oncology, Leuven (Belgium); Joosten, S.; Michiels, L.A.W. [Fontys University of Applied Science, Institute Paramedical Studies, Medical Imaging and Radiotherapeutic Techniques, Eindhoven (Netherlands); Peeters, S. [KU Leuven - University of Leuven, Department of Oncology, Experimental Radiation Oncology, Leuven (Belgium); University Hospitals Leuven, Department of Radiation Oncology, Leuven (Belgium); Ruysscher, D. de [KU Leuven - University of Leuven, Department of Oncology, Experimental Radiation Oncology, Leuven (Belgium); Maastricht University Medical Center, GROW - School for Oncology and Developmental Biology, Department of Radiation Oncology (MAASTRO Clinic), Maastricht (Netherlands)

2017-04-15

After lung-sparing radiotherapy for malignant pleural mesothelioma (MPM), local failure at sites of previous gross disease represents the dominant form of failure. Our aim is to investigate if selective irradiation of the gross pleural disease only can allow dose escalation. In all, 12 consecutive stage I-IV MPM patients (6 left-sided and 6 right-sided) were retrospectively identified and included. A magnetic resonance imaging-based pleural gross tumor volume (GTV) was contoured. Two sets of planning target volumes (PTV) were generated for each patient: (1) a ''selective'' PTV (S-PTV), originating from a 5-mm isotropic expansion from the GTV and (2) an ''elective'' PTV (E-PTV), originating from a 5-mm isotropic expansion from the whole ipsilateral pleural space. Two sets of volumetric modulated arc therapy (VMAT) treatment plans were generated: a ''selective'' pleural irradiation plan (SPI plan) and an ''elective'' pleural irradiation plan (EPI plan, planned with a simultaneous integrated boost technique [SIB]). In the SPI plans, the average median dose to the S-PTV was 53.6 Gy (range 41-63.6 Gy). In 4 of 12 patients, it was possible to escalate the dose to the S-PTV to >58 Gy. In the EPI plans, the average median doses to the E-PTV and to the S-PTV were 48.6 Gy (range 38.5-58.7) and 49 Gy (range 38.6-59.5 Gy), respectively. No significant dose escalation was achievable. The omission of the elective irradiation of the whole ipsilateral pleural space allowed dose escalation from 49 Gy to more than 58 Gy in 4 of 12 chemonaive MPM patients. This strategy may form the basis for nonsurgical radical combined modality treatment of MPM. (orig.) [German] Beim malignen Pleuramesotheliom (MPM) ist nach lungenschonender Radiotherapie das lokale Scheitern an Stellen eines frueheren, sichtbaren Tumors die dominierende Form des Scheiterns. Unser Ziel ist es, zu untersuchen, ob die selektive

Urban Planning for a Renewable Energy Future: Methodological Challenges and Opportunities from a Design Perspective

NARCIS (Netherlands)

Vandevijvere, H.; Stremke, S.

2012-01-01

Urban planning for a renewable energy future requires the collaboration of different disciplines both in research and practice. In the present article, the planning of a renewable energy future is approached from a designer’s perspective. A framework for analysis of the planning questions at hand is

Comparison of CT based-CTV plan and CT based-ICRU38 plan in brachytherapy planning of uterine cervix cancer

International Nuclear Information System (INIS)

Shim, Jin Sup; Jo, Jung Kun; Si, Chang Keun; Lee, Ki Ho; Lee, Du Hyun; Choi, Kye Suk

2004-01-01

Although Improve of CT, MRI Radio-diagnosis and Radiation Therapy Planing, but we still use ICRU38 Planning system(2D film-based) broadly. 3-Dimensional ICR plan(CT image based) is not only offer tumor and normal tissue dose but also support DVH information. On this study, we plan irradiation-goal dose on CTV(CTV plan) and irradiation-goal dose on ICRU 38 point(ICRU38 plan) by use CT image. And compare with tumor-dose, rectal-dose, bladder-dose on both planning, and analysis DVH Sample 11 patients who treated by Ir-192 HDR. After 40 Gy external radiation therapy, ICR plan established. All the patients carry out CT-image scanned by CT-simulator. And we use PLATO(Nucletron) v.14.2 planing system. We draw CTV, rectum, bladder on the CT image. And establish plan irradiation- dose on CTV(CTV plan) and irradiation- dose on A-point(ICRU38 plan) CTV volume(average±SD) is 21.8±26.6 cm 3 , rectum volume(average±SD) is 60.9±25.0 cm 3 , bladder volume(average±SD) is 116.1±40.1cm 3 sampled 11 patients. The volume including 100% dose is 126.7±18.9 cm 3 on ICRU plan and 98.2±74.5 cm 3 on CTV plan. On ICRU planning, the other one's 22.0 cm 3 CTV volume who residual tumor size excess 4cm is not including 100% isodose. 8 patient's 12.9±5.9 cm 3 tumor volume who residual tumor size below 4 cm irradiated 100% dose. Bladder dose(recommended by ICRU 38) is 90.1±21.3 % on ICRU plan, 68.7±26.6% on CTV plan, and rectal dose is 86.4±18.3%, 76.9±15.6%. Bladder and Rectum maximum dose is 137.2±5.9%, 101.1±41.8% on ICRU plan, 107.6±47.9%, 86.9±30.8% on CTV plan. Therefore CTV plan more less normal issue-irradiated dose than ICRU plan. But one patient case who residual tumor size excess 4 cm, Normal tissue dose more higher than critical dose remarkably on CTV plan. 80% over-Irradiated rectal dose(V80rec) is 1.8±2.4 cm 3 on ICRU plan, 0.7±1.0 cm 3 on CTV plan. 80% over-Irradiated bladder dose(V80bla) is 12.2%±8.9 cm 3 on ICRU plan, 3.5±4.1 cm 3 on CTV plan. Likewise, CTV

Requirements for advanced decision support tools in future distribution network planning

NARCIS (Netherlands)

Grond, M.O.W.; Morren, J.; Slootweg, J.G.

2013-01-01

This paper describes the need and requirements for advanced decision support tools in future network planning from a distribution network operator perspective. The existing tools will no longer be satisfactory for future application due to present developments in the electricity sector that increase

Water planning in a changing climate: how do you plan for a future when the past no longer represents the future?

International Nuclear Information System (INIS)

Yuen, Emma

2007-01-01

Full text: Full text: By 2030, the catchments across south-west Western Australia can expect decreases in runoff ranging from 5% to 40% relative to 1990. This has ramifications, not only for consumptive and non-consumptive uses, but for the way decisions are made in an environment of uncertainty. Traditionally, water planning has assumed a static environment whereby statistically defensible climatic records have been used in decision-making. While climate modelling may provide projections of plausible climatic futures, this needs to be integrated with socio-political and economic futures when considering the environment in which regional water plans will apply. Where climate change is slow, enabling biophysical and social systems have time to adapt to long-term water resources planning needs that incorporate principles of intergenerational equity, the precautionary principle and resilience in management strategies. However where changes in climate are poorly recognised against the background of inherent climate variability or where step changes in rainfall occur or threshold assimilative levels of ecosystems are exceeded, conflict and uncertainty challenge the decisionmaking processes. Within the backdrop of climate change, the Department of Water is developing a Regional Water Plan for the southwest which will set the strategic direction on water resources for the next 25 years. In order to move forward with this process, the water sector must undergo a number of transformations: from linear science to complex dynamic systems thinking; from 'decide and defend'to increased community engagement when dealing with both complexity and uncertainty; from conservation of 'museum pieces' to innovation, partnerships and adaptive management. This paper will discuss the philosophy behind the decision-making framework based on experiences from business management and other sectors. It will also discuss an action research process that could be used in the South West Water Plan

Physics and planning for future colliders

International Nuclear Information System (INIS)

Kane, G.L.

1985-01-01

Physics opportunities at future (not presently under construction) colliders are examined, particularly with reference to the motivations for building them. First a number of considerations involved in planning and choosing beams, energies, and luminosities are discussed. Higgs physics, which currently seems to be the central problem of particle physics, is emphasized, with detailed study of how to do WW scattering and how to detect effects of heavy Higgs bosons. Some new results are included. High energy hadron colliders dominate the discussion, but alternatives are examined for comparison and when they have unique capabilities

Energy future Santa Cruz. A citizens plan for energy self-reliance: Executive summary

Science.gov (United States)

Cohn, J.; Stayton, R.

A grassroots energy conservation project which involved more than 3100 residents of Santa Cruz, California, is discussed. Citizens attended forums and town meetings to suggest ideas for solving the community's energy problems. These ideas were then evaluated by the Energy Future Advisory Board and compiled into the Energy Future Plan. The plan covers such topics as new residences, residential retrofit, automobile efficiency, farm efficiency, commercial greenhouses, local food production, commercial efficiency, land use planning, energy eduction and financing, and solar, wind, and ocean energy. If the plan is successfully implemented, the energy that the community is projected to use in 1991 can be lowered by 24 to 35 percent.

Irradiation test plan of oxidation-resistant graphite in WWR-K Research Reactor

International Nuclear Information System (INIS)

Sumita, Junya; Shibata, Taiju; Sakaba, Nariaki; Osaki, Hirotaka; Kato, Hideki; Fujitsuka, Kunihiro; Muto, Takenori; Gizatulin, Shamil; Shaimerdenov, Asset; Dyussambayev, Daulet; Chakrov, Petr

2014-01-01

Graphite materials are used for the in-core components of High Temperature Gas-cooled Reactor (HTGR) which is a graphite-moderated and helium gas-cooled reactor. In the case of air ingress accident in HTGR, SiO_2 protective layer is formed on the surface of SiC layer in TRISO CFP and oxidation of SiC does not proceed and fission products are retained inside the fuel particle. A new safety concept for the HTGR, called Naturally Safe HTGR, has been recently proposed. To enhance the safety of Naturally Safe HTGR ultimately, it is expected that oxidation-resistant graphite is used for graphite components to prevent the TRISO CFPs and fuel compacts from failure. SiC coating is one of candidate methods for oxidation-resistant graphite. JAEA and four graphite companies launched R&Ds to develop the oxidation-resistant graphite and the International Science and Technology Center (ISTC) partner project with JAEA and INP was launched to investigate the irradiation effects on the oxidation-resistant graphite. To determine grades of the oxidation-resistant graphite which will be adopted as irradiation test, a preliminary oxidation test was carried out. This paper described the results of the preliminary oxidation test, the plan of out-of-pile test, irradiation test and post-irradiation test (PIE) of the oxidation-resistant graphite. The results of the preliminary oxidation test showed that the integrity of the oxidation resistant graphite was confirmed and that all of grades used in the preliminary test can be adopted as the irradiation test. Target irradiation temperature was determined to be 1473 (K) and neutron fluence was determined to be from 0.54 × 10"2"5through 1.4 × 10"2"5 (/m"2, E>0.18MeV). Weight change, oxidation rate, activation energy, surface condition, etc. will be evaluated in out-of-pile test and weight change, irradiation effect on oxidation rate and activation energy, surface condition, etc. will be evaluated in PIE. (author)

Identifying the Correlates and Barriers of Future Planning among Parents of Individuals with Intellectual and Developmental Disabilities

Science.gov (United States)

Burke, Meghan; Arnold, Catherine; Owen, Aleksa

2018-01-01

Although individuals with intellectual and developmental disabilities (IDD) are living longer lives, fewer than half of parents of individuals with IDD conduct future planning. The correlates and barriers to future planning must be identified to develop targeted interventions to facilitate future planning. In this study, 388 parents of individuals…

Field in field technique in two-dimensional planning for whole brain irradiation; Tecnica field in field em planejamentos bidimensionais para irradiacao de cerebro total

Energy Technology Data Exchange (ETDEWEB)

Castro, A.L.S.; Campos, T.P.R., E-mail: radioterapia.andre@gmail.com [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte (Brazil). Departamento de Engenharia Nuclear

2016-11-01

Radiotherapy is the most used clinical method used for brain metastases treatment, the most frequent secondary tumors provided by breast, lung and melanomas as primary origin. The protocols often use high daily doses and, depending on the irradiation technique there is high probability of complications in health tissues. In order to minimize adverse effects, it is important the dosimetric analysis of three-dimensional radiotherapy planning through tomographic images or, concerning to the 2D simulations, by the application of techniques that optimize dose distribution by increasing the homogeneity. The study aimed to compare the 2D and 3D conformal planning for total brain irradiation in a individual equivalent situation and evaluate the progress of these planning applying the field in field technique. The methodology consisted of simulating a two-dimensional planning, reproduce it on a set of tomographic images and compare it with the conformal plan for two fields and four fields (field in field). The results showed no significant difference between 2D and 3D planning for whole brain irradiation, and the field in field technique significantly improved the dose distribution in brain volume compared with two fields for the proposal situation. As conclusion, the two-dimensional plane for the four fields described was viable for whole brain irradiation in the treatment of brain metastases at the proposal situation. (author)

75 FR 55776 - Request for Comments on Vaccine Production and Additional Planning for Future Possible Pandemic...

Science.gov (United States)

2010-09-14

... Production and Additional Planning for Future Possible Pandemic Influenza AGENCY: International Trade... additional planning for future possible pandemic influenza. DATES: Written comments must be submitted on or... influenza pandemic (see World Health Organization announcement of August 10, 2010) and the need to plan for...

Basic design requirements for indigenous irradiator

International Nuclear Information System (INIS)

Anwar Abd Rahman; Rosli Darmawan; Mohd Arif Hamzah; Fadil Ismail; Muhd Nor Atan

2007-01-01

Most of the irradiators owned by Nuclear Malaysia are imported from other countries. The irradiators are used for various applications such as Research and Development, agriculture and industry. There is a plan to develop locally made multi-purpose gamma irradiator in 9th Malaysia Plan which equipped with better safety features. This paper will discuss the basic requirements for the design of the irradiator. (Author)

Fontan Surgical Planning: Previous Accomplishments, Current Challenges, and Future Directions.

Science.gov (United States)

Trusty, Phillip M; Slesnick, Timothy C; Wei, Zhenglun Alan; Rossignac, Jarek; Kanter, Kirk R; Fogel, Mark A; Yoganathan, Ajit P

2018-04-01

The ultimate goal of Fontan surgical planning is to provide additional insights into the clinical decision-making process. In its current state, surgical planning offers an accurate hemodynamic assessment of the pre-operative condition, provides anatomical constraints for potential surgical options, and produces decent post-operative predictions if boundary conditions are similar enough between the pre-operative and post-operative states. Moving forward, validation with post-operative data is a necessary step in order to assess the accuracy of surgical planning and determine which methodological improvements are needed. Future efforts to automate the surgical planning process will reduce the individual expertise needed and encourage use in the clinic by clinicians. As post-operative physiologic predictions improve, Fontan surgical planning will become an more effective tool to accurately model patient-specific hemodynamics.

Succession Planning and Management: The Backbone of the Radiology Group's Future.

Science.gov (United States)

Donner, E Michael; Gridley, Daniel; Ulreich, Sidney; Bluth, Edward I

2017-01-01

The transition of leadership within radiology practices is often not a planned replacement process with formal development of potential future leaders. To ensure their ongoing success, however, practices need to develop comprehensive succession plans that include a robust developmental program for potential leaders consisting of mentoring, coaching, structured socialization, 360-degree feedback, developmental stretch assignments, job rotation, and formal education. Succession planning and leadership development will be necessary in the future for a practice to be successful in its business relationships and to be financially viable. Copyright © 2016 American College of Radiology. Published by Elsevier Inc. All rights reserved.

SU-F-T-504: Non-Divergent Planning Method for Craniospinal Irradiation

Energy Technology Data Exchange (ETDEWEB)

Sperling, N; Bogue, J; Parsai, E [University of Toledo Medical Center, Toledo, OH (United States)

2016-06-15

Purpose: Traditional Craniospinal Irradiation (CSI) planning techniques require careful field placement to allow optimal divergence and field overlap at depth, and measurement of skin gap. The result of this is a necessary field overlap resulting in dose heterogeneity in the spinal canal. A novel, nondivergent field matching method has been developed to allow simple treatment planning and delivery without the need to measure skin gap. Methods: The CSI patient was simulated in the prone, and a plan was developed. Bilateral cranial fields were designed with couch and collimator rotation to eliminate divergence with the upper spine field and minimize anterior divergence into the lenses. Spinal posterior-to-anterior fields were designed with the couch rotated to 90 degrees to allow gantry rotation to eliminate divergence at the match line, and the collimator rotated to 90 degrees to allow appropriate field blocking with the MLCs. A match line for the two spinal fields was placed and the gantry rotated to equal angles in opposite directions about the match line. Jaw positions were then defined to allow 1mm overlap at the match line to avoid cold spots. A traditional CSI plan was generated using diverging spinal fields, and a comparison between the two techniques was generated. Results: The non-divergent treatment plan was able to deliver a highly uniform dose to the spinal cord with a cold spot of only 95% and maximum point dose of 115.8%, as compared to traditional plan cold spots of 87% and hot spots of 132% of the prescription dose. Conclusion: A non-divergent method for planning CSI patients has been developed and clinically implemented. Planning requires some geometric manipulation in order to achieve an adequate dose distribution, however, it can help to manage cold spots and simplify the shifts needed between spinal fields.

SU-F-T-504: Non-Divergent Planning Method for Craniospinal Irradiation

International Nuclear Information System (INIS)

Sperling, N; Bogue, J; Parsai, E

2016-01-01

Purpose: Traditional Craniospinal Irradiation (CSI) planning techniques require careful field placement to allow optimal divergence and field overlap at depth, and measurement of skin gap. The result of this is a necessary field overlap resulting in dose heterogeneity in the spinal canal. A novel, nondivergent field matching method has been developed to allow simple treatment planning and delivery without the need to measure skin gap. Methods: The CSI patient was simulated in the prone, and a plan was developed. Bilateral cranial fields were designed with couch and collimator rotation to eliminate divergence with the upper spine field and minimize anterior divergence into the lenses. Spinal posterior-to-anterior fields were designed with the couch rotated to 90 degrees to allow gantry rotation to eliminate divergence at the match line, and the collimator rotated to 90 degrees to allow appropriate field blocking with the MLCs. A match line for the two spinal fields was placed and the gantry rotated to equal angles in opposite directions about the match line. Jaw positions were then defined to allow 1mm overlap at the match line to avoid cold spots. A traditional CSI plan was generated using diverging spinal fields, and a comparison between the two techniques was generated. Results: The non-divergent treatment plan was able to deliver a highly uniform dose to the spinal cord with a cold spot of only 95% and maximum point dose of 115.8%, as compared to traditional plan cold spots of 87% and hot spots of 132% of the prescription dose. Conclusion: A non-divergent method for planning CSI patients has been developed and clinically implemented. Planning requires some geometric manipulation in order to achieve an adequate dose distribution, however, it can help to manage cold spots and simplify the shifts needed between spinal fields.

Technology, safety, and costs of decommissioning a reference large irradiator and reference sealed sources

Energy Technology Data Exchange (ETDEWEB)

Haffner, D.R.; Villelgas, A.J. [Pacific Northwest Lab., Richland, WA (United States)

1996-01-01

This report contains the results of a study sponsored by the US Nuclear Regulatory Commission (NRC) to examine the decommissioning of large radioactive irradiators and their respective facilities, and a broad spectrum of sealed radioactive sources and their respective devices. Conceptual decommissioning activities are identified, and the technology, safety, and costs (in early 1993 dollars) associated with decommissioning the reference large irradiator and sealed source facilities are evaluated. The study provides bases and background data for possible future NRC rulemaking regarding decommissioning, for evaluation of the reasonableness of planned decommissioning actions, and for determining if adequate funds are reserved by the licensees for decommissioning of their large irradiator or sealed source facilities. Another purpose of this study is to provide background and information to assist licensees in planning and carrying out the decommissioning of their sealed radioactive sources and respective facilities.

Technology, safety, and costs of decommissioning a reference large irradiator and reference sealed sources

International Nuclear Information System (INIS)

Haffner, D.R.; Villelgas, A.J.

1996-01-01

This report contains the results of a study sponsored by the US Nuclear Regulatory Commission (NRC) to examine the decommissioning of large radioactive irradiators and their respective facilities, and a broad spectrum of sealed radioactive sources and their respective devices. Conceptual decommissioning activities are identified, and the technology, safety, and costs (in early 1993 dollars) associated with decommissioning the reference large irradiator and sealed source facilities are evaluated. The study provides bases and background data for possible future NRC rulemaking regarding decommissioning, for evaluation of the reasonableness of planned decommissioning actions, and for determining if adequate funds are reserved by the licensees for decommissioning of their large irradiator or sealed source facilities. Another purpose of this study is to provide background and information to assist licensees in planning and carrying out the decommissioning of their sealed radioactive sources and respective facilities

How Do High School Seniors See Their Future? Parental and Peer Influences on Their Personal and Professional Plans

Directory of Open Access Journals (Sweden)

Iovu Mihai-Bogdan

2014-07-01

Full Text Available Statement of problem: Future orientation is a multidimensional and multistage phenomenon. Studies have indicated that how adolescents anticipate and plan for their future is greatly influenced by the particular context in which they are placed, but most of the research in this area has been conducted with adolescents from western cultures. Aim: This study examined the personal (getting married, moving with the partner, having a child and professional (having a job, starting a business future planning of adolescents in contemporary Romania and its relation with adolescents’ background and with parents and friends support. Method: We administered a questionnaire measuring their future orientation and support from parents and friends to 3524 high school seniors from Romania. Results: Adolescents’ personal future planning varies across different life domains. Females were more likely to plan moving with the partner and getting married, while males were more likely to plan a career option. Family had an effect on professional plans, but the effect is negative, while friends were positive associated with all the future planning

Learning from the Past, Planning for the Future...

Directory of Open Access Journals (Sweden)

Blanche Cameron

2013-02-01

Full Text Available Ever since the National Planning Policy Framework hove into view, it has been polarising opinions, either for or against this most radical shake up of UK planning policy since just after the Second World War. Suddenly, what was a highly (some say over complex system of thousands of pages of detailed planning guidance has been simplified to a 58 page document, which has been through a year of consultation before coming into law. It is interesting to consider how the NPPF is now being viewed and applied in different contexts. Flatman and Perring’s paper explores the potential (positive and negative impacts of the NPPF on archaeological practice, in terms of conservation, but also in social and cultural terms – the fear being that, without the proper requirements in place, archaeological evidence may at best be conserved, but without sufficient capacity to research, understand and integrate its meaning for us and our future.

Mathematical simulation of dose fields in the planning of repair stuff irradiation

International Nuclear Information System (INIS)

Tashlykov, O.L.; Shcheklein, S.E.; Markelov, N.I.

2004-01-01

The role of planning stage in the cycle of optimization when organizing repair works at NPPs is discussed. The methods used for forecasting irradiation doses for personnel engaged in repair works are considered. The importance of the problems of simulating the doses connected with estimation of dose rate values in different points of the working area and working time period in corresponding radiation fields is shown. The calculated data on distributions of γ radiation dose rate fields from surface and linear sources are given [ru

Planning for a Better Future: California 2025. 2011 Update

Science.gov (United States)

Public Policy Institute of California, 2011

2011-01-01

California's current economic and fiscal realities make nonpartisan, objective information on the state's future challenges all the more critical. Understandably, the search is on for immediate solutions to the unprecedented crises people face today. But if the present crises make policymakers shelve long-term planning, the result may be an even…

International standardization of instruments for neutron irradiation tests

International Nuclear Information System (INIS)

Tanimoto, Masataka; Shibata, Akira; Nakamura, Jinichi; Tsuchiya, Kunihiko; Cho, M.; Lee, C.; Park, S.; Choo, K.

2012-01-01

The JMTR in JAEA and HANARO in KAERI are the foremost testing/research reactors in the world and these are expected to contribute to many nuclear fields. As a part of instrument development in irradiation field, information exchange of instruments started from 2010 under the cooperation agreements between KAERI and JAEA. The instruments developed in JMTR and HANARO are introduced and cooperation experiments as future plan are discussed for international standardization. (author)

Are the Planning of the Sustainable Future to be left for the chemical engineers?

DEFF Research Database (Denmark)

Elle, Morten

1997-01-01

The paper discuss the need for new ways of planning and managing the environment. Traditional spatial planning has been reduced to a question of putting colours on maps, there are a need for the planning to restrengthen it's position and gain a future in the planning of the city of tomorrow....

Irradiation Test Plan and Safety Analysis of the Fatigue Capsule(05S-05K)

Energy Technology Data Exchange (ETDEWEB)

Cho, Man Soon; Kim, B. G.; Kang, Y. H.; Choo, K. N.; Sohn, J. M.; Park, S. J.; Shin, Y. T.; Seo, C. K

2007-01-15

In this report, the design, fabrication, the out-pile test and the irradiation test plan of the fatigue capsule 05S-05K were described and the safety aspect during the design, fabrication and irradiation test was reviewed. A cyclic load device necessary for the fatigue test was newly designed and manufactured. By using the cyclic load device the performance test and the preliminary fatigue test were performed with STS316L specimen of {phi}1.8 mm x 12.5 mm gage length under the same condition(550 .deg. C) as the temperature of the specimen during the irradiation test. As a result of the test, the fracture of the specimen occurs at a total of 70,120 cycles, at which the displacement was 2.02 mm. The reactivity effect was reviewed and an analysis for the structural and thermal integrity was performed to review the safety of the capsule, which will be irradiated at a temperature higher than 550 .deg. C And the thermal analysis shows that the temperatures of the parts are less than the melting temperatures of the corresponding materials. The structural analysis considering this temperature shows that the combined stress on the outer tube is less than the allowable stress limits and so the structural integrity is maintained.

MAFF sponsored research: detection tests for irradiated food

International Nuclear Information System (INIS)

Blackburn, C.M.; Holley, P.A.; Pryke, D.C.

1993-01-01

In their 1986 report on the safety and wholesomeness of irradiated food the UK Advisory Committee on Irradiated and Novel Foods (ACINF) recognised that a generally applicable test to determine if a food had been irradiated was not available. The committee considered that, although not a pre-requisite, the existence of a detection test would be a useful supplement to a control system and do much to reassure consumers; with this in mind ACINF recommended that detection methods should be kept under review. As a consequence, in 1987 the Ministry initiated a comprehensive R and D detection test programme. Over fifty papers have been published to date as a result of this programme. MAFF (Ministry Of Agriculture Fisheries and Food) has also been involved in other research associated with irradiation and food safety, some of which is described in this paper. This paper aims to give an overview of recent work funded under the food irradiation programme. Twelve projects have been supported over the last two years, ten of which involved the development of detection tests for irradiated food. A summary of these projects is presented: - Thermoluminescence; - Electron Spin Resonance; - 2-alkylcyclobutanones; -Determination Of Hydrogen; - Differential Scanning Calorimetry; - Limulus Amoebocyte Lysate; - DNA; - Pesticide Breakdown; - Neutron Irradiation; -Future Plans. (orig./vhe)

Technique for sparing previously irradiated critical normal structures in salvage proton craniospinal irradiation

International Nuclear Information System (INIS)

McDonald, Mark W; Wolanski, Mark R; Simmons, Joseph W; Buchsbaum, Jeffrey C

2013-01-01

Cranial reirradiation is clinically appropriate in some cases but cumulative radiation dose to critical normal structures remains a practical concern. The authors developed a simple technique in 3D conformal proton craniospinal irradiation (CSI) to block organs at risk (OAR) while minimizing underdosing of adjacent target brain tissue. Two clinical cases illustrate the use of proton therapy to provide salvage CSI when a previously irradiated OAR required sparing from additional radiation dose. The prior radiation plan was coregistered to the treatment planning CT to create a planning organ at risk volume (PRV) around the OAR. Right and left lateral cranial whole brain proton apertures were created with a small block over the PRV. Then right and left lateral “inverse apertures” were generated, creating an aperture opening in the shape of the area previously blocked and blocking the area previously open. The inverse aperture opening was made one millimeter smaller than the original block to minimize the risk of dose overlap. The inverse apertures were used to irradiate the target volume lateral to the PRV, selecting a proton beam range to abut the 50% isodose line against either lateral edge of the PRV. Together, the 4 cranial proton fields created a region of complete dose avoidance around the OAR. Comparative photon treatment plans were generated with opposed lateral X-ray fields with custom blocks and coplanar intensity modulated radiation therapy optimized to avoid the PRV. Cumulative dose volume histograms were evaluated. Treatment plans were developed and successfully implemented to provide sparing of previously irradiated critical normal structures while treating target brain lateral to these structures. The absence of dose overlapping during irradiation through the inverse apertures was confirmed by film. Compared to the lateral X-ray and IMRT treatment plans, the proton CSI technique improved coverage of target brain tissue while providing the least

Developing a vision and strategic action plan for future community-based residency training.

Science.gov (United States)

Skelton, Jann B; Owen, James A

2016-01-01

The Community Pharmacy Residency Program (CPRP) Planning Committee convened to develop a vision and a strategic action plan for the advancement of community pharmacy residency training. Aligned with the profession's efforts to achieve provider status and expand access to care, the Future Vision and Action Plan for Community-based Residency Training will provide guidance, direction, and a strategic action plan for community-based residency training to ensure that the future needs of community-based pharmacist practitioners are met. National thought leaders, selected because of their leadership in pharmacy practice, academia, and residency training, served on the planning committee. The committee conducted a series of conference calls and an in-person strategic planning meeting held on January 13-14, 2015. Outcomes from the discussions were supplemented with related information from the literature. Results of a survey of CPRP directors and preceptors also informed the planning process. The vision and strategic action plan for community-based residency training is intended to advance training to meet the emerging needs of patients in communities that are served by the pharmacy profession. The group anticipated the advanced skills required of pharmacists serving as community-based pharmacist practitioners and the likely education, training and competencies required by future residency graduates in order to deliver these services. The vision reflects a transformation of community residency training, from CPRPs to community-based residency training, and embodies the concept that residency training should be primarily focused on training the individual pharmacist practitioner based on the needs of patients served within the community, and not on the physical location where pharmacy services are provided. The development of a vision statement, core values statements, and strategic action plan will provide support, guidance, and direction to the profession of pharmacy to

The planning of future research program of underground laboratories in overseas

International Nuclear Information System (INIS)

Honma, Nobuyuki; Tanai, Kenji; Hasegawa, Hiroshi

2002-02-01

The objectives of this study is to identify the research issues, which are to be conducted in the future underground research laboratory, about operation and logistics systems for the planning of future research and development program. The research programs and experiments, etc. were investigated for the geological disposal projects in overseas sedimentary rocks and coastal geological environments aiming to reflect in the future underground research facility plan in Japan. In the investigation, information on the engineered-barrier performance, design and construction of underground facilities, tunnel support, transportation and emplacement, and backfilling technology, etc. were collected. Based on these informations, the purpose, the content, and the result of each investigations and tests were arranged. The strategy and the aim in the entire underground research facility, and the flow of investigations and tests, etc. were also arranged from the purpose, the relations and the sequence of each investigation and experiment, and the usage of results, etc. (author)

Communications strategy for irradiator siting approvals: a Canadian perspective

International Nuclear Information System (INIS)

Swinwood, J.F.; Fraser, F.M.

1995-01-01

This paper presents a new public attitudes survey and a communications strategy developed during a 2-year period, during which a proposal for the installation of a unique cobalt 60 sourced sludge irradiator was being considered. This Sludge Recycling Facility proposal was supported by a plan that addressed knowledge needs of five target audiences -politicians, neighbours, regulatory and licensing agencies, city staff and future plant workers, and special interest groups. (author)

Status and future plan of nuclear data activities in China

Energy Technology Data Exchange (ETDEWEB)

Zhuang Youxiang; Tang Hongqing [Academia Sinica, Beijing, BJ (China). Inst. of Atomic Energy

1997-03-01

The present status and future plan of nuclear data measurement and evaluation in China are presented, including the supplement, improvement on CENDL-2.1 and benchmark test of CENDL-2.1, the progress on nuclear data measurement and CENDL-3. (author)

Future plans on the Kyoto University Research Reactor (KUR)

International Nuclear Information System (INIS)

Shibata, Seiichi

2000-01-01

The Research Reactor Institute (RRI), Kyoto University, for aiming at performing the 'Experiments using a reactor and its related research', was established in Showa 38 (1963) as a cooperative research institute for universities and so on in allover Japan. Operation using KUR of one of main facilities in RRI was started by 1 MW of its rated output in 1964, and converted to 5 MW in 1968, after which through development , addition and modification of various research apparatus it has been proposed to the cooperative application researches with universities and so on in allover Japan, hitherto. Among these periods, its research organization is improved to six departments containing twenty divisions and two attached research facilities to progress some investigations on future plans at RRI for response to new researching trends. Here were described on present state of research on use of low concentrated uranium fuels at research reactor, and future plans on neutron factory and hybrid reactor. The former aims at establishment of a new research facility capable of alternating to KUR for future academic research on research reactor containing high quality and high degree application of neutron field and safety management and feature upgrading of nuclear energy. And, the latter aims at development on an accelerator drive uncritical reactor combined an accelerator neutron source and an uncritical reactor. (G.K.)

Three-dimensional irradiation planning of laryngeal and hypopharyngeal cancers based on phantom examinations Pt. 1

International Nuclear Information System (INIS)

Esik, Olga; Schlegel, Wolfgang; Doll, Josef; Nemeth, Gyoergy; Lorenz, W.J.

1989-01-01

Three-dimensional dose distributions were computed for the photon radiotherapy of laryngeal and hypopharyngeal cancers using a pair of opposing lateral beams in fixed positions. Treatment plans obtained under various irradiation conditions ( 60 Co gamma unit, photon beams from a 8 MeV and a 15 MeV linear accelerator) are analyzed and compared. The 8 MeV and 15 MeV plans are somewhat superior to the cobalt ones in all cases. Simulations show that extreme care is needed in positioning the isocentre: an accuracy of ±3 mm is required in the median sagittal plane. (author) 21 refs.; 11 figs

Corporate strategy and viable future land use: Planning for closure from the outset of mining

International Nuclear Information System (INIS)

Warhurst, A.

2000-01-01

This paper provides an overview of the environmental impact of mining on viable future land use and underlines the imperative of improved environmental management and closure planning. It argues that pollution prevention, through planning for closure, can lead to cost-effective strategies for sustainable minerals development and viable future land use. This seems to be most true for greenfield sites since, generally, the earlier closure planning and pollution prevention is built into a project, the more cost-effective and environmentally benign closure will be. Further, for greenfield sites, pollution prevention techniques can be employed from the outset, at the stages of exploration and mine development, and then monitored and improved through the operation stage to closure, and can be kept in place to manage future land use. The paper discusses how global changes in the industry, following the liberalisation of investment regimes, and mergers and strategic alliances between key firms, has, by virtue of the diffusion of new technology, led to further opportunities to prevent pollution and optimise future land use through planning for closure from the outset. The objectives and components of closure plans are also reviewed as the paper draws on case studies to highlight some of the possible constraints and challenges to pollution prevention that may be faced at the level of both public policy and corporate strategy. The article concludes by suggesting a forward-looking approach to integrated environmental management and viable future land-use planning based on a dynamic model for environmental management. (author)

Irradiated foods

International Nuclear Information System (INIS)

Darrington, Hugh

1988-06-01

This special edition of 'Food Manufacture' presents papers on the following aspects of the use of irradiation in the food industry:- 1) an outline view of current technology and its potential. 2) Safety and wholesomeness of irradiated and non-irradiated foods. 3) A review of the known effects of irradiation on packaging. 4) The problems of regulating the use of irradiation and consumer protection against abuse. 5) The detection problem - current procedures. 6) Description of the Gammaster BV plant in Holland. 7) World outline review. 8) Current and future commercial activities in Europe. (U.K.)

Future plans for the Imperial College CONSORT research reactor

International Nuclear Information System (INIS)

Franklin, S.J.

1999-01-01

The Imperial College (IC) research reactor was designed jointly by GEC and the IC Mechanical Engineering Department. It first went critical on 9 April 1965 and has been operating successfully for over 33 years. The reactor provides a service to both academia and industry for neutron activation analysis, reactor and applied nuclear physics training, neutron detector calibration, isotope production and irradiations. The reactor has strategic importance for the UK, as it is now the only remaining research reactor in the country. It is therefore important to put in place refurbishment programmes and to maintain and upgrade the safety case. This paper describes the current facilities, applications and users of the research reactor and outlines both the recent and the planned developments. (author)

Regional Planning, Local Visions : Participatory Futuring in West Africa

OpenAIRE

Peter Easton

2000-01-01

The note examines regional planning, and future participatory methods for economic development in West Africa, based on the work carried out by the Club du Sahel - a branch of the Organization for Economic Cooperation and Development (OECD) - responsible for coordinating northern donor agencies, in support of food security, and natural resource management in the desert-edge portions of Wes...

Automatic Scheduling and Planning (ASAP) in future ground control systems

Science.gov (United States)

Matlin, Sam

1988-01-01

This report describes two complementary approaches to the problem of space mission planning and scheduling. The first is an Expert System or Knowledge-Based System for automatically resolving most of the activity conflicts in a candidate plan. The second is an Interactive Graphics Decision Aid to assist the operator in manually resolving the residual conflicts which are beyond the scope of the Expert System. The two system designs are consistent with future ground control station activity requirements, support activity timing constraints, resource limits and activity priority guidelines.

GammeV: results and future plans at Fermilab

Energy Technology Data Exchange (ETDEWEB)

Wester, William; /Fermilab

2010-05-01

GammeV is an axion-like particle photo regeneration experiment that employs the light shining through a wall technique. We obtain limits on the coupling of a photon to an axion-like particle that extend previous limits for both scalar and pseudoscalar particles in the milli-eV mass range. We have reconfigured our apparatus to search for chameleon particles. We describe the current results and future plans for similar activities at Fermilab.

Air Force Strategic Planning: Past, Present, and Future

Science.gov (United States)

2017-01-01

Raphael S. Cohen Air Force Strategic Planning Past, Present, and Future C O R P O R A T I O N Limited Print and Electronic Distribution Rights This... intelligence , surveillance, and reconnaissance QDR Quadrennial Defense Review TAC Tactical Air Command UAV unmanned aerial vehicles 1 1...Ithaca, N.Y.: Cornell University Press, 2000, p. 258. 5 U.S. Government Printing Office, Army Air Forces Field Manual: Employment of Aviation of the

Career destinations, views and future plans of the UK medical qualifiers of 1988.

Science.gov (United States)

Taylor, Kathryn; Lambert, Trevor; Goldacre, Michael

2010-01-01

To report the career destinations, views and future plans of a cohort of senior doctors who qualified in the 1980s. Postal questionnaire survey of all doctors who qualified from all UK medical schools in 1988. The response rate was 69%. We estimated that 81% of the total cohort was working in the NHS, 16 years after qualification; and that at least 94% of graduates who, when students, were from UK homes, were working in medicine. Of NHS doctors, 30% worked part-time. NHS doctors rated their job satisfaction highly (median score 19.9, scale 5-25) but were less satisfied with the amount of leisure time available to them (median score 5.4, scale 1-10). NHS doctors were very positive about their careers, but were less positive about working hours and some other aspects of the NHS. Women were more positive than men about working conditions; general practitioners were more positive than hospital doctors. Twenty-five percent reported unmet needs for further training or career-related advice, particularly about career development. Twenty-nine percent intended to reduce their hours in future, while 6%, mainly part-time women, planned to increase their hours. Overall, 10% of NHS doctors planned to do more service work in future and 24% planned to do less; among part-time women, 18% planned to do more and only 14% less. These NHS doctors, now in their 40s, had a high level of satisfaction with their jobs and their careers but were less satisfied with some other aspects of their working environment. A substantial percentage had expectations about future career development and change.

The practical use of an interactive visualization and planning tool for intervention planning in particle accelerator environments with ionizing radiation

CERN Document Server

Fabry, Thomas; Vanherpe, Liesbeth; Braesch, Christian; Tabourot, Laurent; Feral, Bruno

2014-01-01

A core issue during the planning of a maintenance intervention in a facility with ionizing radiation is the minimization of the integrated equivalent dose contracted by the maintenance workers during the intervention. In this work, we explore the use of a technical-scientific software program facilitating the intervention planning in irradiated environments using sound mathematical concepts. We show how the software can be used in planning future operations using a case studies: the decommissioning of a beam dump for a linear 160 MeV H− accelerator. Interactive visualization of the facilities and radiation levels, as well as tools for interactive trajectory planning are explored, as well as automatic calculation of the expected integrated individual dose contracted during an intervention.

The proceedings of 1993-workshop on 'development and application of facilities for low temperature irradiation as well as controlled irradiation'

International Nuclear Information System (INIS)

Kuramoto, Eiichi; Okada, Moritami

1993-03-01

This is the proceedings of 1992-workshop of the working group on 'Development and Application of Facilities for Low Temperature Irradiation as well as Controlled Irradiation' held at the Research Reactor Institute of Kyoto University on February 23 and 24, 1993. In this workshop until now, studies on irradiation effects in many materials irradiated at lower and higher temperatures have been reported. It has been clearly defined that a careful choice of irradiation conditions is most important. At the present time, a setting plan of exactly controlled irradiation facility, which is able to irradiate with higher temperatures, is in progress. On the other hand, a plan of vertical low temperature irradiation facility has not yet been performed for lack of funds. In last year, a middle scale plan of low temperature irradiation facility, which is possible to irradiate a fast-neutron dose above 10 17 n/cm 2 at about 5K, was proposed in this workshop. In this proceedings, the advanced facility is required to construct to the KUR as soon as possible by many of the workshop members. (author)

Technical Note: Partial body irradiation of mice using a customized PMMA apparatus and a clinical 3D planning/LINAC radiotherapy system

Energy Technology Data Exchange (ETDEWEB)

Karagounis, Ilias V.; Koukourakis, Michael I., E-mail: targ@her.forthnet.gr, E-mail: mkoukour@med.duth.gr [Department of Radiotherapy–Oncology, Radiopathology and Radiobiology Unit, Medical School, Democritus University of Thrace, Alexandroupolis 68100 (Greece); Abatzoglou, Ioannis M., E-mail: abadzoglou@yahoo.gr [Medical Physics Department, University General Hospital of Alexandroupolis, Alexandroupolis 68100 (Greece)

2016-05-15

Purpose: In vivo radiobiology experiments involving partial body irradiation (PBI) of mice are of major importance because they allow for the evaluation of individual organ tolerance; overcoming current limitations of experiments using lower dose, whole body irradiation. In the current study, the authors characterize and validate an effective and efficient apparatus for multiple animal PBI, directed to the head, thorax, or abdomen of mice. Methods: The apparatus is made of polymethylmethacrylate and consists of a rectangular parallelepiped prism (40 cm × 16 cm × 8 cm), in which five holes were drilled to accomodate standard 60 ml syringes, each housing an unanesthetized, fully immobilized mouse. Following CT-scanning and radiotherapy treatment planning, radiation fields were designed to irradiate the head, thorax, or abdomen of the animal. Thermoluminescent dosimeters (TLDs) were used to confirm the treatment planning dosimetry for primary beam and scattered radiation. Results: Mice are efficiently placed into 60 ml syringes and immobilized, without the use of anesthetics. Although partial rotational movement around the longitudinal axis and a minor 2 mm forward/backward movement are permitted, this does not compromise the irradiation of the chosen body area. TLDs confirmed the dose values predicted by the treatment planning dosimetry, both for primary beam and scattered radiation. Conclusions: The customized PMMA apparatus described and validated is cost-effective, convenient to use, and efficient in performing PBI without the use of anesthesia. The developed apparatus permits the isolated irradiation of the mouse head, thorax, and abdomen. Importantly, the apparatus allows the delivery of PBI to five mice, simultaneously, representing an efficient way to effectively expose a large number of animals to PBI through multiple daily fractions, simulating clinical radiotherapy treatment schedules.

Ocean Studies Board annual report 1989 and future plans

International Nuclear Information System (INIS)

1990-01-01

The major activities of the Ocean Studies Board of the National Research Council for 1989 are reviewed. The following are discussed: the Navy Panel, the CO2 Panel, the Committee on the Ocean's Role in Global Change, the Committee on the Coastal Ocean, the Workshop on Issues of U.S. Marine Fisheries, and the Continental Margins Workshop Committee. Future plans are covered

MAD-X progress and future plans

CERN Document Server

Deniau, L

2012-01-01

The design efforts for the High Luminosity upgrade of the Large Hadron Collider (HL-LHC) will require significant extensions of the MAD-X code widely used for designing and simulating particles accelerators. These changes are framed into a global redesign of the MADX architecture meant to consolidate its structure, increase its robustness and flexibility, and improve its performance. Some examples of recent extensions to MAD-X like the RF-Multipole element will be presented. Improvement for models and algorithms selection providing better consistency of the results and a wider range of use will be discussed. The computation efficiency will also be addressed to profit better of modern technologies. In this paper, we will describe the last improvements and the future plans of the project.

Materials irradiation subpanel report to BESAC neutron sources and research panel

International Nuclear Information System (INIS)

Birtcher, R.C.; Goland, A.N.; Lott, R.

1992-01-01

The future success of the nuclear power option in the US (fission and fusion) depends critically on the continued existence of a healthy national materials-irradiation program. Consideration of the requirements for acceptable materials-irradiation systems in a new neutron source has led the subcommittee to identify an advanced steady-state reactor (ANS) as a better choice than a spallation neutron source. However, the subcommittee also hastens to point out that the ANS cannot stand alone as the nation's sole high-flux mixed-spectrum neutron irradiation source in the next century. It must be incorporated in a broader program that includes other currently existing neutron irradiation facilities. Upgrading and continuing support for these facilities must be planned. In particular, serious consideration should be given to converting the HFIR into a dedicated materials test reactor, and long-term support for several university reactors should be established

Food irradiation

International Nuclear Information System (INIS)

Sato, Tomotaro; Aoki, Shohei

1976-01-01

Definition and significance of food irradiation were described. The details of its development and present state were also described. The effect of the irradiation on Irish potatoes, onions, wiener sausages, kamaboko (boiled fish-paste), and mandarin oranges was evaluated; and healthiness of food irradiation was discussed. Studies of the irradiation equipment for Irish potatoes in a large-sized container, and the silo-typed irradiation equipment for rice and wheat were mentioned. Shihoro RI center in Hokkaido which was put to practical use for the irradiation of Irish potatoes was introduced. The state of permission of food irradiation in foreign countries in 1975 was introduced. As a view of the food irradiation in the future, its utilization for the prevention of epidemics due to imported foods was mentioned. (Serizawa, K.)

Three-dimensional conformal breast irradiation in the prone position

Directory of Open Access Journals (Sweden)

C. Kurtman

2003-10-01

Full Text Available The prone position can be used for the planning of adjuvant radiotherapy after conservative breast surgery in order to deliver less irradiation to lung and cardiac tissue. In the present study, we compared the results of three-dimensional conformal radiotherapy planning for five patients irradiated in the supine and prone position. Tumor stage was T1N0M0 in four patients and T1N1M0 in one. All patients had been previously submitted to conservative breast surgery. Breast size was large in three patients and moderate in the other two. Irradiation in the prone position was performed using an immobilization foam pad with a hole cut into it to accommodate the breast so that it would hang down away from the chest wall. Dose-volume histograms showed that mean irradiation doses reaching the ipsilateral lung were 8.3 ± 3.6 Gy with the patient in the supine position and 1.4 ± 1.0 Gy with the patient in the prone position (P = 0.043. The values for the contralateral lung were 1.3 ± 0.7 and 0.3 ± 0.1 Gy (P = 0.043 and the values for cardiac tissue were 4.6 ± 1.6 and 3.0 ± 1.7 Gy (P = 0.079, respectively. Thus, the dose-volume histograms demonstrated that lung tissue irradiation was significantly lower with the patient in the prone position than in the supine position. Large-breasted women appeared to benefit most from irradiation in the prone position. Prone position breast irradiation appears to be a simple and effective alternative to the conventional supine position for patients with large breasts, since they are subjected to lower pulmonary doses which may cause less pulmonary side effects in the future.

The future of irradiation applications on earth and in space

International Nuclear Information System (INIS)

Karel, M.

1989-01-01

This article discusses the current status of food irradiation in the United States, what needs to be done to establish food irradiation on a truly commercial basis, and prospects for the use of food irradiation in space

Comparing conformal, arc radiotherapy and helical tomotherapy in craniospinal irradiation planning.

Science.gov (United States)

Myers, Pamela A; Mavroidis, Panayiotis; Papanikolaou, Nikos; Stathakis, Sotirios

2014-09-08

Currently, radiotherapy treatment plan acceptance is based primarily on dosimetric performance measures. However, use of radiobiological analysis to assess benefit in terms of tumor control and harm in terms of injury to normal tissues can be advantageous. For pediatric craniospinal axis irradiation (CSI) patients, in particular, knowing the technique that will optimize the probabilities of benefit versus injury can lead to better long-term outcomes. Twenty-four CSI pediatric patients (median age 10) were retrospectively planned with three techniques: three-dimensional conformal radiation therapy (3D CRT), volumetric-modulated arc therapy (VMAT), and helical tomotherapy (HT). VMAT plans consisted of one superior and one inferior full arc, and tomotherapy plans were created using a 5.02cm field width and helical pitch of 0.287. Each plan was normalized to 95% of target volume (whole brain and spinal cord) receiving prescription dose 23.4Gy in 13 fractions. Using an in-house MATLAB code and DVH data from each plan, the three techniques were evaluated based on biologically effective uniform dose (D=), the complication-free tumor control probability (P+), and the width of the therapeutically beneficial range. Overall, 3D CRT and VMAT plans had similar values of D= (24.1 and 24.2 Gy), while HT had a D= slightly lower (23.6 Gy). The average values of the P+ index were 64.6, 67.4, and 56.6% for 3D CRT, VMAT, and HT plans, respectively, with the VMAT plans having a statistically significant increase in P+. Optimal values of D= were 28.4, 33.0, and 31.9 Gy for 3D CRT, VMAT, and HT plans, respectively. Although P+ values that correspond to the initial dose prescription were lower for HT, after optimizing the D= prescription level, the optimal P+ became 94.1, 99.5, and 99.6% for 3D CRT, VMAT, and HT, respectively, with the VMAT and HT plans having statistically significant increases in P+. If the optimal dose level is prescribed using a radiobiological evaluation method, as

The Past, Present, and Future of Discharge Planning in Taiwan

Directory of Open Access Journals (Sweden)

Shu-Chuan Lin

2013-06-01

Full Text Available Discharge planning is an interdisciplinary approach to provide continuity of care; it is a process that includes identification, assessment, goal setting, planning, implementation, coordination, and evaluation. Discharge planning has been viewed as a major way to enhance a smooth transition for patients from the hospital to home or other chronic care units and as a solution to solve problems associated with postdischarge care. The promotion of discharge planning began in the United States in the 1960s. Nursing scholars from Taiwan learned about the concept of discharge planning from the United States in the early 1980s and subsequently introduced it to Taiwanese medical institutions in 1985. A policy to promote discharge planning in Taiwan was announced by the Executive Yuan, Department of Health in 1993. Following the healthcare reforms in 1995, discharge planning has since been strongly promoted. Studies concerning discharge planning in Taiwan showed some promising results, including increased satisfaction of patients and their families, improved preparation of caregivers, and improved quality of life for patients. However, patients receiving interdisciplinary discharge planning services were still in the minority. There was no standard evaluation procedure for interdisciplinary discharge planning, and a high percentage of patients thought that hospitals handled the postdischarge long-term care services referral procedure inadequately. Despite the positive attitudes toward discharge planning, many physicians still demonstrate an unsatisfactory level of knowledge and behaviors with regard to discharge planning. To enhance the implementation of discharge planning, a standard evaluation procedure for interdisciplinary discharge planning and improved physician awareness concerning the importance of discharge planning are needed. In Taiwan, the improvement of discharge planning in the foreseeable future is promising with the accreditation of the

Craniospinal Irradiation for Trilateral Retinoblastoma Following Ocular Irradiation

Energy Technology Data Exchange (ETDEWEB)

Marks, Lawrence B.; Bentel, Gunilla; Sherouse, George W.; Spencer, David P.; Light, Kim

2015-01-15

A case study is presented. Craniospinal radiotherapy and a three-field pineal boost for trilateral retinoblastoma were delivered to a patient previously irradiated for ocular retinoblastoma. The availability of CT-based three-dimensional treatment planning provided the capability of identifying the previously irradiated volume as a three-dimensional anatomic structure and of designing a highly customized set of treatment beams that minimized reirradiation of that volume.

TH-C-BRD-12: Robust Intensity Modulated Proton Therapy Plan Can Eliminate Junction Shifts for Craniospinal Irradiation

International Nuclear Information System (INIS)

Liao, L; Jiang, S; Li, Y; Wang, X; Li, H; Zhu, X; Sahoo, N; Gillin, M; Mahajan, A; Grosshans, D; Zhang, X; Lim, G

2014-01-01

Purpose: The passive scattering proton therapy (PSPT) technique is the commonly used radiotherapy technique for craniospinal irradiation (CSI). However, PSPT involves many numbers of junction shifts applied over the course of treatment to reduce the cold and hot regions caused by field mismatching. In this work, we introduced a robust planning approach to develop an optimal and clinical efficient techniques for CSI using intensity modulated proton therapy (IMPT) so that junction shifts can essentially be eliminated. Methods: The intra-fractional uncertainty, in which two overlapping fields shift in the opposite directions along the craniospinal axis, are incorporated into the robust optimization algorithm. Treatment plans with junction sizes 3,5,10,15,20,25 cm were designed and compared with the plan designed using the non-robust optimization. Robustness of the plans were evaluated based on dose profiles along the craniospinal axis for the plans applying 3 mm intra-fractional shift. The dose intra-fraction variations (DIV) at the junction are used to evaluate the robustness of the plans. Results: The DIVs are 7.9%, 6.3%, 5.0%, 3.8%, 2.8% and 2.2%, for the robustly optimized plans with junction sizes 3,5,10,15,20,25 cm. The DIV are 10% for the non-robustly optimized plans with junction size 25 cm. The dose profiles along the craniospinal axis exhibit gradual and tapered dose distribution. Using DIVs less than 5% as maximum acceptable intrafractional variation, the overlapping region can be reduced to 10 cm, leading to potential reduced number of the fields. The DIVs are less than 5% for 5 mm intra-fractional shifts with junction size 25 cm, leading to potential no-junction-shift for CSI using IMPT. Conclusion: This work is the first report of the robust optimization on CSI based on IMPT. We demonstrate that robust optimization can lead to much efficient carniospinal irradiation by eliminating the junction shifts

Technical review on irradiation tests and post-irradiation examinations in JMTR

International Nuclear Information System (INIS)

2017-07-01

The Japan Materials Testing Reactor (JMTR) has been contributing to various R and D activities in the nuclear research such as the fundamental research of nuclear materials/ fuels, safety research and development of power reactors, radio isotope (RI) production since its beginning of the operation in 1968. Irradiation technologies and post irradiation examination (PIE) technologies are the important factors for irradiation test research. Moreover, these technologies induce the breakthrough in area of nuclear research. JMTR has been providing unique capabilities for the irradiation test research for about 40 years since 1968. In future, any needs for irradiation test research used irradiation test reactors will continue, such as R and D of generation 4 power reactors, fundamental research of materials/fuels, RI production. Now, decontamination and new research reactor construction are common issue in the world according to aging. This situation is the same in Japan. This report outlines irradiation and PIE technologies developed at JMTR in 40 years to contribute to the technology transfer and human resource development. We hope that this report will be used for the new research rector design as well as the irradiation test research and also used for the human resource development of nuclear engineers in future. (author)

Comparative study of 6 MV and 15 MV treatment plans for large chest wall irradiation

International Nuclear Information System (INIS)

Prasana Sarathy, N.; Kothanda Raman, S.; Sen, Dibyendu; Pal, Bipasha

2007-01-01

Conventionally, opposed tangential fields are used for the treatment of chest wall irradiation. If the chest wall is treated in the linac, 4 or 6 MV photons will be the energy of choice. It is a welI-established rule that for chest wall separations up to 22 cm, one can use mid-energies, with acceptable volume of hot spots. For larger patient sizes (22 cm and above), mid-energy beams produce hot spots over large volumes. The purpose of this work is to compare plans made with 6 and 15 MV photons, for patients with large chest wall separations. The obvious disadvantage in using high-energy photons for chest wall irradiation is inadequate dose to the skin. But this can be compensated by using a bolus of suitable thickness

Irradiation Tests Supporting LEU Conversion of Very High Power Research Reactors in the US

Energy Technology Data Exchange (ETDEWEB)

Woolstenhulme, N. E.; Cole, J. I.; Glagolenko, I.; Holdaway, K. K.; Housley, G. K.; Rabin, B. H.

2016-10-01

The US fuel development team is developing a high density uranium-molybdenum alloy monolithic fuel to enable conversion of five high-power research reactors. Previous irradiation tests have demonstrated promising behavior for this fuel design. A series of future irradiation tests will enable selection of final fuel fabrication process and provide data to qualify the fuel at moderately-high power conditions for use in three of these five reactors. The remaining two reactors, namely the Advanced Test Reactor and High Flux Isotope Reactor, require additional irradiation tests to develop and demonstrate the fuel’s performance with even higher power conditions, complex design features, and other unique conditions. This paper reviews the program’s current irradiation testing plans for these moderately-high irradiation conditions and presents conceptual testing strategies to illustrate how subsequent irradiation tests will build upon this initial data package to enable conversion of these two very-high power research reactors.

The practical use of an interactive visualization and planning tool for intervention planning in particle accelerator environments with ionizing radiation

Energy Technology Data Exchange (ETDEWEB)

Fabry, Thomas, E-mail: thomas.fabry@cern.ch [European Organization for Nuclear Research, CERN, CH-1211 Genève 23 (Switzerland); Blaha, Jan; Vanherpe, Liesbeth [European Organization for Nuclear Research, CERN, CH-1211 Genève 23 (Switzerland); Braesch, Christian; Tabourot, Laurent [SYMME, Université de Savoie, Polytech Annecy-Chambéry, 5 Chemin de Bellevue, 74944 Annecy le Vieux (France); Feral, Bruno [European Organization for Nuclear Research, CERN, CH-1211 Genève 23 (Switzerland)

2014-04-11

A core issue during the planning of a maintenance intervention in a facility with ionizing radiation is the minimization of the integrated equivalent dose contracted by the maintenance workers during the intervention. In this work, we explore the use of a technical-scientific software program facilitating the intervention planning in irradiated environments using sound mathematical concepts. We show how the software can be used in planning future operations using a case studies: the decommissioning of a beam dump for a linear 160 MeV H{sup −} accelerator. Interactive visualization of the facilities and radiation levels, as well as tools for interactive trajectory planning are explored, as well as automatic calculation of the expected integrated individual dose contracted during an intervention.

The practical use of an interactive visualization and planning tool for intervention planning in particle accelerator environments with ionizing radiation

International Nuclear Information System (INIS)

Fabry, Thomas; Blaha, Jan; Vanherpe, Liesbeth; Braesch, Christian; Tabourot, Laurent; Feral, Bruno

2014-01-01

A core issue during the planning of a maintenance intervention in a facility with ionizing radiation is the minimization of the integrated equivalent dose contracted by the maintenance workers during the intervention. In this work, we explore the use of a technical-scientific software program facilitating the intervention planning in irradiated environments using sound mathematical concepts. We show how the software can be used in planning future operations using a case studies: the decommissioning of a beam dump for a linear 160 MeV H − accelerator. Interactive visualization of the facilities and radiation levels, as well as tools for interactive trajectory planning are explored, as well as automatic calculation of the expected integrated individual dose contracted during an intervention

77 FR 3635 - Connect America Fund; A National Broadband Plan for Our Future; Establishing Just and Reasonable...

Science.gov (United States)

2012-01-25

...-208; Report No. 2945] Connect America Fund; A National Broadband Plan for Our Future; Establishing Just and Reasonable Rates for Local Exchange Carriers; High-Cost Universal Service Support et al... applicability. Subject: Connect America Fund: A National Broadband Plan for Our Future; Establishing Just and...

Irradiation performance of HTGR recycle fissile fuel

International Nuclear Information System (INIS)

Homan, F.J.; Long, E.L. Jr.

1976-08-01

The irradiation performance of candidate HTGR recycle fissile fuel under accelerated testing conditions is reviewed. Failure modes for coated-particle fuels are described, and the performance of candidate recycle fissile fuels is discussed in terms of these failure modes. The bases on which UO 2 and (Th,U)O 2 were rejected as candidate recycle fissile fuels are outlined, along with the bases on which the weak-acid resin (WAR)-derived fissile fuel was selected as the reference recycle kernel. Comparisons are made relative to the irradiation behavior of WAR-derived fuels of varying stoichiometry and conclusions are drawn about the optimum stoichiometry and the range of acceptable values. Plans for future testing in support of specification development, confirmation of the results of accelerated testing by real-time experiments, and improvement in fuel performance and reliability are described

Perspectives on treatment with irradiation in Slovenia

Directory of Open Access Journals (Sweden)

Primož Strojan

2007-12-01

Full Text Available Background: Radiotherapy is one of the three main modalities of cancer treatment. However, effective treatment with radiotherapy may only be assured by highly advanced irradiation facilities, including systems for planning, performing and quality control of irradiation. The second requirement assuring an effective treatment is proper capacities of treatment units and computer equipment to provide a timely access to treatment to > 50 % of all cancer patients and a proper structure and number of staff specialized in handling with radiotherapy equipment. In Slovenia, only 38 % of cancer patients are treated with radiotherapy. In general, the waiting times of patients referred to radiotherapy are too long. Therefore, further development and upgrading of irradiation facilities will remain a priority in oncology in Slovenia also in the future. At the same time, in our endeavors to meet the set goals, we have been facing unforeseen problems both with human resources and inadequate financial appreciation of radiotherapeutic services that, without significant national aid, do not yield sufficient funds for renewal and upgrading of equipment and its further expansion.

Monitoring plan and maintenance NPP the Vandellos I and future prospects

International Nuclear Information System (INIS)

Margalef Escoda, S.

2013-01-01

This paper intends to give to know the singularities of an installation phase of latency and your monitoring and maintenance plan. the horizons that has the installation medium-term to guide the future dismantling level 3 monitoring and maintenance activities are also described.

Experimental Plan for EDF Energy Creep Rabbit Graphite Irradiations- Rev. 2 (replaces Rev. 0 ORNL/TM/2013/49).

Energy Technology Data Exchange (ETDEWEB)

Burchell, Timothy D [ORNL

2014-07-01

The experimental results obtained here will assist in the development and validation of future models of irradiation induced creep of graphite by providing the following data: Inert creep stain data from low to lifetime AGR fluence Inert creep-property data (especially CTE) from low to lifetime AGR fluence Effect of oxidation on creep modulus (by indirect comparison with experiment 1 and direct comparison with experiment 3 NB. Experiment 1 and 3 are not covered here) Data to develop a mechanistic understanding, including oAppropriate creep modulus (including pinning and high dose effects on structure) oInvestigation of CTE-creep strain behavior under inert conditions oInformation on the effect of applied stress/creep strain on crystallite orientation (requires XRD) oEffect of creep strain on micro-porosity (requires tomography & microscopy) This document describes the experimental work planned to meet the requirements of project technical specification [1] and EDF Energy requests for additional Pre-IE work. The PIE work is described in detail in this revision (Section 8 and 9).

Development of irradiation rig in HTTR and dosimetry method. I-I type irradiation equipment

Energy Technology Data Exchange (ETDEWEB)

Shibata, Taiju; Kikuchi, Takayuki [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment; Miyamoto, Satoshi; Ogura, Kazutomo [Japan Atomic Power Co., Tokyo (Japan)

2002-12-01

The High Temperature Engineering Test Reactor (HTTR) is a graphite-moderated, helium gas-cooled test reactor with a maximum power of 30 MW. The HTTR aims not only to establish and upgrade the technological basis for the HTGRs but also to perform the innovative basic research on high temperature engineering with high temperature irradiation fields. It is planned that the HTTR is used to perform various engineering tests such as the safety demonstration test, high temperature test operation and irradiation test with large irradiation fields at high temperatures. This paper describes the design of the I-I type irradiation equipment developed as the first irradiation rig for the HTTR and does the planned dosimetry method at the first irradiation test. It was developed to perform in-pile creep test on a stainless steel with large standard size specimens in the HTTR. It can give great loads on the specimens stably and can control the irradiation temperature precisely. The in-core creep properties on the specimens are measured by newly developed differential transformers and the irradiation condition in the core is monitored by thermocouples and self-powered neutron detectors (SPNDs), continuously. The irradiated neutron fluence is assessed by neutron fluence monitors of small metallic wires after the irradiation. The obtained data at the first irradiation test can strongly be contributed to upgrade the technological basis for the HTGRs, since it is the first direct measurement of the in-core irradiation environments of the HTTR. (author)

Technology Implementation Plan: Irradiation Testing and Qualification for Nuclear Thermal Propulsion Fuel

Energy Technology Data Exchange (ETDEWEB)

Harrison, Thomas J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Howard, Richard H. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Rader, Jordan D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2017-09-01

This document is a notional technology implementation plan (TIP) for the development, testing, and qualification of a prototypic fuel element to support design and construction of a nuclear thermal propulsion (NTP) engine, specifically its pre-flight ground test. This TIP outlines a generic methodology for the progression from non-nuclear out-of-pile (OOP) testing through nuclear in-pile (IP) testing, at operational temperatures, flows, and specific powers, of an NTP fuel element in an existing test reactor. Subsequent post-irradiation examination (PIE) will occur in existing radiological facilities. Further, the methodology is intended to be nonspecific with respect to fuel types and irradiation or examination facilities. The goals of OOP and IP testing are to provide confidence in the operational performance of fuel system concepts and provide data to program leadership for system optimization and fuel down-selection. The test methodology, parameters, collected data, and analytical results from OOP, IP, and PIE will be documented for reference by the NTP operator and the appropriate regulatory and oversight authorities. Final full-scale integrated testing would be performed separately by the reactor operator as part of the preflight ground test.

Status and future plans for the LEP accelerator

International Nuclear Information System (INIS)

Placidi, M.

1992-01-01

An overview is given of the LEP performance in 1991 as compared to the goals defined in the design phase and the targets agreed with the physics experiments during the year. Achievements and limitations in the machine operation for physics in terms of beam current and luminosity are discussed and analyzed. Progress in beam polarization studies leading to improved energy calibration by the resonant depolarization technique are described. Finally, prospects and future plans to increase luminosity, to upgrade the energy and to implement polarization control are presented. (author)

HFR irradiation testing of fusion materials

International Nuclear Information System (INIS)

Conrad, R.; von der Hardt, P.; Loelgen, R.; Scheurer, H.; Zeisser, P.

1984-01-01

The present and future role of the High Flux Reactor Petten for fusion materials testing has been assessed. For practical purposes the Tokamak-based fusion reactor is chosen as a point of departure to identify material problems and materials data needs. The identification is largely based on the INTOR and NET design studies, the reported programme strategies of Japan, the U.S.A. and the European Communities for technical development of thermonuclear fusion reactors and on interviews with several experts. Existing and planned irradiation facilities, their capabilities and limitations concerning materials testing have been surveyed and discussed. It is concluded that fission reactors can supply important contributions for fusion materials testing. From the point of view of future availability of fission testing reactors and their performance it appears that the HFR is a useful tool for materials testing for a large variety of materials. Prospects and recommendations for future developments are given

Offline multiple adaptive planning strategy for concurrent irradiation of the prostate and pelvic lymph nodes

International Nuclear Information System (INIS)

Qi, Peng; Xia, Ping; Pouliot, Jean; Roach, Mack

2014-01-01

Purpose: Concurrent irradiation of the prostate and pelvic lymph nodes (PLNs) can be challenging due to the independent motion of the two target volumes. To address this challenge, the authors have proposed a strategy referred to as Multiple Adaptive Planning (MAP). To minimize the number of MAP plans, the authors’ previous work only considered the prostate motion in one major direction. After analyzing the pattern of the prostate motion, the authors investigated a practical number of intensity-modulated radiotherapy (IMRT) plans needed to accommodate the prostate motion in two major directions simultaneously. Methods: Six patients, who received concurrent irradiation of the prostate and PLNs, were selected for this study. Nine MAP-IMRT plans were created for each patient with nine prostate contours that represented the prostate at nine locations with respect to the PLNs, including the original prostate contour and eight contours shifted either 5 mm in a single anterior-posterior (A-P), or superior-inferior (S-I) direction, or 5 mm in both A-P and S-I directions simultaneously. From archived megavoltage cone beam CT (MV-CBCT) and a dual imaging registration, 17 MV-CBCTs from 33 available MV-CBCT from these patients showed large prostate displacements (>3 mm in any direction) with respect to the pelvic bones. For each of these 17 fractions, one of nine MAP-IMRT plans was retrospectively selected and applied to the MV-CBCT for dose calculation. For comparison, a simulated isocenter-shifting plan and a reoptimized plan were also created for each of these 17 fractions. The doses to 95% (D95) of the prostate and PLNs, and the doses to 5% (D5) of the rectum and bladder were calculated and analyzed. Results: For the prostate, D95 > 97% of the prescription dose was observed in 16, 16, and 17 of 17 fractions for the MAP, isocenter-shifted, and reoptimized plans, respectively. For PLNs, D95 > 97% of the prescription doses was observed in 10, 3, and 17 of 17 fractions for

Examining the support needs of ageing family carers in developing future plans for a relative with an intellectual disability.

Science.gov (United States)

Taggart, Laurence; Truesdale-Kennedy, Maria; Ryan, Assumpta; McConkey, Roy

2012-09-01

Planning for the future care of adults with an intellectual disability after the main family carer ceases their care, continues to be a sensitive and difficult time posing challenges for service providers internationally. Limited research has been undertaken on this topic because until recently, people with intellectual disability usually pre-deceased their parents. This study examined ageing carers' preferences for future care and the support systems required to make such future plans. The study was conducted in one region of the United Kingdom with a high proportion of family carers. A mixed methods design was employed. In Stage 1, a structured questionnaire was used to collate information on the health, caregiving demands and future planning preferences of 112 parent and sibling carers; aged 60-94 years. In Stage 2, 19 in-depth semistructured interviews were undertaken with a sample of carers to explore a range of issues around future planning. Over half of the carers were lone carers, mainly female, with many reporting a wide range of health problems. A third of these carers reported that their caregiving resulted in high levels of anxiety. The main preference of the carers was for the person to remain in the family home, with either the family and/or paid staff to support them. A minority of parent carers preferred the person to move into the home of a sibling, although some favoured the person moving to a residential facility with other people with intellectual disabilities. The majority of carers did not want their relative to move into an older people's residential/nursing facility. In the qualitative data, four main themes were identified around future planning: unremitting apprehension, the extent of planning, obstacles encountered and solutions for future planning. Avoidance, lack of guidance and a lack of appropriate residential provision were cited as obstacles to making future plans compounded by the emotional upset experienced by carers in thinking

ELearning Strategic Planning 2020: The Voice of Future Students as Stakeholders in Higher Education

Science.gov (United States)

Finger, Glenn; Smart, Vicky

2013-01-01

Most universities are undertaking information technology (IT) strategic planning. The development of those plans often includes the voices of academics and sometimes engages alumni and current students. However, few engage and acknowledge the voice of future students. This paper is situated within the "Griffith University 2020 Strategic…

Simulation for evaluation of the multi-ion-irradiation Laboratory of TechnoFusion facility and its relevance for fusion applications

International Nuclear Information System (INIS)

Jimenez-Rey, D.; Mota, F.; Vila, R.; Ibarra, A.; Ortiz, Christophe J.; Martinez-Albertos, J.L.; Roman, R.; Gonzalez, M.; Garcia-Cortes, I.; Perlado, J.M.

2011-01-01

Thermonuclear fusion requires the development of several research facilities, in addition to ITER, needed to advance the technologies for future fusion reactors. TechnoFusion will focus in some of the priority areas identified by international fusion programmes. Specifically, the TechnoFusion Area of Irradiation of Materials aims at surrogating experimentally the effects of neutron irradiation on materials using a combination of ion beams. This paper justifies this approach using computer simulations to validate the multi-ion-irradiation Laboratory. The planned irradiation facility will investigate the effects of high energetic radiations on reactor-relevant materials. In a second stage, it will also be used to analyze the performance of such materials and evaluate newly designed materials. The multi-ion-irradiation Laboratory, both triple irradiation and high-energy proton irradiation, can provide valid experimental techniques to reproduce the effect of neutron damage in fusion environment.

Present status and future plan of JMTR project

International Nuclear Information System (INIS)

Kawamura, Hiroshi; Niimi, Motoji; Ishihara, Masahiro; Miyazawa, Masataka; Hori, Naohiko; Nagao, Yoshiharu

2008-01-01

The Japan Materials Testing Reactor (JMTR) of Japan Atomic Energy Agency (JAEA) is a light water cooling tank typed reactor with first criticality in March 1968. The JMTR has been applied to fuel/material irradiation examinations for LWRs, HTGR, fusion reactor and RI production. Owing to the connection between the JMTR and hot laboratory by a canal, easy re irradiation tests can conduct with safety and quick transportation of irradiated samples. The JMTR operation was stopped in August 2006 in order to conduct its refurbishment. The reactor facilities will be refurbished during four years from the beginning of FY 2007, and necessary examination and work are carrying out on schedule. The renewed JMTR will be started from FY 2011, and be operated for a period of about 20 years (until around FY 2030). The usability improvement of the JMTR, e.g. higher reactor available factor, shortening turnaround time to get irradiation results, attractive irradiation cost, business confidence, is also discussing as the preparations for re operation

Present status and future plan of JMTR project

International Nuclear Information System (INIS)

Kawamura, Hiroshi; Niimi, Motoji; Ishihara, Masahiro; Miyazawa, Masataka; Hori, Naohiko; Nagao, Yoshiharu

2008-01-01

The Japan Materials Testing Reactor (JMTR) of Japan Atomic Energy Agency (JAEA) is a light water cooling tank typed reactor with first criticality in March 1968. The JMTR has been applied to fuel/material irradiation examinations for LWRs, HTGR, fusion reactor and RI production. Owing to the connection between the JMTR and hot laboratory by a canal, easy re-irradiation tests can conduct with safety and quick transportation of irradiated samples. The JMTR operation was stopped in August 2006 in order to conduct its refurbishment. The reactor facilities will be refurbished during four years from the beginning of FY 2007, and necessary examination and work are carrying out on schedule. The renewed JMTR will be started from FY 2011, and be operated for a record of about 20 years (until around FY 2030). The usability improvement of the JMTR,e.g. higher reactor available factor, shortening turnaround time to get irradiation results, attractive irradiation cost, business confidence, is also discussing as the preparations for re-operation

Present status and future plan of JMTR project

International Nuclear Information System (INIS)

Kawamura, Hiroshi; Niimi, Motoji; Ishihara, Masahiro; Miyazawa, Masataka; Hori, Naohiko; Nagao, Yoshiharu

2008-01-01

The Japan Materials Testing Reactor (JMTR) of Japan Atomic Energy Agency (JAEA) is a light water cooling tank typed reactor with first criticality in March 1968. The JMTR has been applied to fuel/material irradiation examinations for LWRs, HTGR, fusion reactor and RI production. Owing to the connection between the JMTR and hot laboratory by a canal, easy re-irradiation tests can conduct with safety and quick transportation of irradiated samples. The JMTR operation was stopped in August 2006 in order to conduct its refurbishment. The reactor facilities will be refurbished during four years from the beginning of FY 2007, and necessary examination and work are carrying out on schedule. The renewed JMTR will be started from FY 2011, and be operated for a period of about 20 years (until around FY 2030). The usability improvement of the JMTR, e.g. higher reactor available factor, shortening turnaround time to get irradiation results, attractive irradiation cost, business confidence, is also discussing as the preparations for re-operation. (author)

Status and Future Plans of JAERI Eergy-Recovery Linac FEL

CERN Document Server

Hajima, R; Kikuzawa, N; Minehara, E J; Nagai, R; Nishimori, N; Nishitani, T; Sawamura, M; Yamauchi, T

2005-01-01

An energy-recovery linac for a high-power free-electron laser is in operation at Japan Atomic Energy Research Institute (JAERI). In this paper, we report results of research activities and future plans of JAERI ERL-FEL, which are the construction of FEL transport line, the operation of newly-installed RF controller and IOTs, the development of super-lattice photo cathode.

SU-E-T-337: Treatment Planning Study of Craniospinal Irradiation with Spot Scanning Proton Therapy

International Nuclear Information System (INIS)

Tasson, A; Beltran, C; Laack, N; Childs, S; Tryggestad, E; Whitaker, T

2014-01-01

Purpose: To develop a treatment planning technique that achieves optimal robustness against systematic position and range uncertainties, and interfield position errors for craniospinal irradiation (CSI) using spot scanning proton radiotherapy. Methods: Eighteen CSI patients who had previously been treated using photon radiation were used for this study. Eight patients were less than 10 years old. The prescription dose was 23.4Gy in 1.8Gy fractions. Two different field arrangement types were investigated: 1 posterior field per isocenter and 2 posterior oblique fields per isocenter. For each field type, two delivery configurations were used: 5cm bolus attached to the treatment table and a 4.5cm range shifter located inside the nozzle. The target for each plan was the whole brain and thecal sac. For children under the age of 10, all plan types were repeated with an additional dose of 21Gy prescribed to the vertebral bodies. Treatment fields were matched by stepping down the dose in 10% increments over 9cm. Robustness against 3% and 3mm uncertainties, as well as a 3mm inter-field error was analyzed. Dose coverage of the target and critical structure sparing for each plan type will be considered. Ease of planning and treatment delivery was also considered for each plan type. Results: The mean dose volume histograms show that the bolus plan with posterior beams gave the best overall plan, and all proton plans were comparable to or better than the photon plans. The plan type that was the most robust against the imposed uncertainties was also the bolus plan with posterior beams. This is also the plan configuration that is the easiest to deliver and plan. Conclusion: The bolus plan with posterior beams achieved optimal robustness against systematic position and range uncertainties, as well as inter-field position errors

Present status and future aspects of highly precise radiotherapy

International Nuclear Information System (INIS)

Oita, Masataka; Takegawa, Yoshihiro; Maezawa, Hiroshi; Ikushima, Hitoshi; Osaki, Kyosuke; Nishitani, Hiromu

2006-01-01

This review describes about therapeutic equipments, irradiation technology, actual practice of highly precise radiotherapy (RT) and its tasks in future. Development of radiation equipments has made the therapy highly precise. At present, there are reportedly 836 linacs and 23 microtrons in Japan (March, 2005), most of which are computerized, new generation equipments. Image-guided RT, CT-linac system, real-time tumor-tracking RT (RTRT), tomotherapy and cyberknife are introduced owing to development of concerned devices and equipments. In addition, there are 7 facilities with proton and/or heavy ion beams. In parallel with the machine development above, irradiation has become to that from 2D to 3D by multi-gate technique with use of multi-leaf collimator and intensity-modulated RT is introduced. RTRT is an example of 4D RT. Practically, stereotactic irradiation (STI) to brain tumor has resulted in 1-year cumulative survival rate of 58% in 16 cases (23 foci, median size 1.2 cm and volume 0.57 ml) with median dose of 21.0 Gy in authors' hospital. STI in the early stage lung cancers is also practically conducted without severe adverse effects. Future tasks involve the further development of irradiation techniques and RT planning, QA/QC system, and raising of experts in related fields, which is a national problem. (T.I.)

Planning for the future.

Science.gov (United States)

Stiewing, Janis

2002-01-01

Revising the strategic plan was the beginning of a multiyear initiative that will determine the path of the JRCERT. The key word in the preceding statement is beginning. The strategic plan is an ever-changing document. Although some components, such as the values statements, will stand over time, other components will change as accreditation and educational arenas change. That is the paradox of strategic planning: Remaining true to the vision, values and mission statements requires knowing when to change to keep the JRCERT aligned with the responsive to its communities of interest.

An integrated model for long-term power generation planning toward future smart electricity systems

International Nuclear Information System (INIS)

Zhang, Qi; Mclellan, Benjamin C.; Tezuka, Tetsuo; Ishihara, Keiichi N.

2013-01-01

Highlights: • An integrated model for planning future smart electricity systems was developed. • The model consists of an optimization model and an hour-by-hour simulation model. • The model was applied to Tokyo area, Japan in light of the Fukushima Accident. • Paths to best generation mixes of smart electricity systems were obtained. • Detailed hourly operation patterns in smart electricity systems were obtained. - Abstract: In the present study, an integrated planning model was developed to find economically/environmentally optimized paths toward future smart electricity systems with high level penetration of intermittent renewable energy and new controllable electric devices at the supply and demand sides respectively for regional scale. The integrated model is used to (i) plan the best power generation and capacity mixes to meet future electricity demand subject to various constraints using an optimization model; (ii) obtain detailed operation patterns of power plants and new controllable electric devices using an hour-by-hour simulation model based on the obtained optimized power generation mix. As a case study, the model was applied to power generation planning in the Tokyo area, Japan, out to 2030 in light of the Fukushima Accident. The paths toward best generation mixes of smart electricity systems in 2030 based on fossil fuel, hydro power, nuclear and renewable energy were obtained and the feasibility of the integrated model was proven

Planning a 60Co irradiation facility for fruit preservation

International Nuclear Information System (INIS)

Yuan, H.C.

1978-01-01

A conceptual design for a conveyor system is proposed for use in fruit irradiation. The seasonal nature of the fruit harvest requires that the 60 Co source inventory should be sufficient to meet the demand at peak season, but this would be excessive at the beginning and towards the end of the harvest. Because of the short crop period the possibility of other irradiation services should be exploited to ensure full utilization of the facility. For successful extension of fruit shelf-life rigid practices in pre-irradiation treatment are essential and careful packaging is indispensable to the operation of the irradiator. Based on the time required for construction and equipment supply, a period of 18 months should be assumed for completion of the project. (author)

LAMI - a planned Brazilian facility to investigate the mechanical and physical properties of structural materials under irradiation

International Nuclear Information System (INIS)

Andrade, Arnaldo H.P.; Lobo, Raquel M.

2011-01-01

The LAMI (Laboratorio de Materiais Irradiados) is a hot laboratory designed to the characterization of irradiated structural material and will constitute one of the main installations of the Brazilian Multipurpose Reactor (RMB). The strong points of LAMI are: to contribute, through theoretical and experimental investigations, to the development of knowledge in materials science in order to be able to predict the evolution of the physical and mechanical material properties under service conditions (irradiation, thermomechanical solicitation, influence of the environment, etc); to characterize the properties of the materials used in the nuclear industry in order to determine their performance and to be able to predict their life expectancy; to establish, maintain and make use of the database generated by these data and to provide expertise on industrial components, in particular to investigate strain or rupture mechanisms. The test materials can be irradiated or not, and originate from surveillance programs, experimental neutron irradiations or simulated irradiation with charged particles. The main line of LAMI will have 10 shielded hot cells. The building also will have an area dedicated to micro and nano structural materials analysis. The mechanical characterization to be carried out within LAMI includes mechanical tests on irradiated materials, comprehension of behavior and damage processes and the incorporation of the test data results in a data bank for capitalization of test results. Planned materials to be tested are going to be metallic alloys used in industrial and experimental reactor: pressure vessel steels, internal stainless steels, austeno-ferritic steels, zirconium alloys and aluminum alloys. (author)

Multiscale Simulation of Thermo-mechanical Processes in Irradiated Fission-reactor Materials

International Nuclear Information System (INIS)

Phillpot, Simon R.

2012-01-01

The work funded from this project has been published in six papers, with two more in draft form, with submission planned for the near future. The papers are: (1) Kinetically-Evolving Irradiation-Induced Point-Defect Clusters in UO 2 by Molecular-Dynamics Simulation; (2) Kinetically driven point-defect clustering in irradiated MgO by molecular-dynamics simulation; (3) Grain-Boundary Source/Sink Behavior for Point Defect: An Atomistic Simulation Study; (4) Energetics of intrinsic point defects in uranium dioxide from electronic structure calculations; (5) Thermodynamics of fission products in UO 2±x ; and (6) Atomistic study of grain boundary sink strength under prolonged electron irradiation. The other two pieces of work that are currently being written-up for publication are: (1) Effect of Pores and He Bubbles on the Thermal Transport Properties of UO2 by Molecular Dynamics Simulation; and (2) Segregation of Ruthenium to Edge Dislocations in Uranium Dioxide.

Realistic Goals and Processes for Future Space Astronomy Portfolio Planning

Science.gov (United States)

Morse, Jon

2015-08-01

It is generally recognized that international participation and coordination is highly valuable for maximizing the scientific impact of modern space science facilities, as well as for cost-sharing reasons. Indeed, all large space science missions, and most medium and small missions, are international, even if one country or space agency has a clear leadership role and bears most of the development costs. International coordination is a necessary aspect of future mission planning, but how that coordination is done remains debatable. I propose that the community's scientific vision is generally homogeneous enough to permit international coordination of decadal-scale strategic science goals. However, the timing and budget allocation/funding mechanisms of individual countries and/or space agencies are too disparate for effective long-term strategic portfolio planning via a single international process. Rather, I argue that coordinated space mission portfolio planning is a natural consequence of international collaboration on individual strategic missions. I review the process and outcomes of the U.S. 2010 decadal survey in astronomy & astrophysics from the perspective of a government official who helped craft the survey charter and transmitted guidance to the scientific community on behalf of a sponsoring agency (NASA), while continuing to manage the current portfolio that involved ongoing negotiations with other space agencies. I analyze the difficulties associated with projecting long-term budgets, obtaining realistic mission costs (including the additional cost burdens of international partnerships), and developing new (possibly transformational) technologies. Finally, I remark on the future role that privately funded space science missions can have in accomplishing international science community goals.

Food irradiation

International Nuclear Information System (INIS)

Matsuyama, Akira

1990-01-01

This paper reviews researches, commentaries, and conference and public records of food irradiation, published mainly during the period 1987-1989, focusing on the current conditions of food irradiation that may pose not only scientific or technologic problems but also political issues or consumerism. Approximately 50 kinds of food, although not enough to fill economic benefit, are now permitted for food irradiation in the world. Consumerism is pointed out as the major factor that precludes the feasibility of food irradiation in the world. In the United States, irradiation is feasible only for spices. Food irradiation has already been feasible in France, Hollands, Belgium, and the Soviet Union; has under consideration in the Great Britain, and has been rejected in the West Germany. Although the feasibility of food irradiation is projected to increase gradually in the future, commercial success or failure depends on the final selection of consumers. In this respect, the role of education and public information are stressed. Meat radicidation and recent progress in the method for detecting irradiated food are referred to. (N.K.) 128 refs

Visualization of biomedical image data and irradiation planning using a parallel computing system

International Nuclear Information System (INIS)

Lehrig, R.

1991-01-01

The contribution explains the development of a novel, low-cost workstation for the processing of biomedical tomographic data sequences. The workstation was to allow both graphical display of the data and implementation of modelling software for irradiation planning, especially for calculation of dose distributions on the basis of the measured tomogram data. The system developed according to these criteria is a parallel computing system which performs secondary, two-dimensional image reconstructions irrespective of the imaging direction of the original tomographic scans. Three-dimensional image reconstructions can be generated from any direction of view, with random selection of sections of the scanned object. (orig./MM) With 69 figs., 2 tabs [de

Building on the past, planning for the future

International Nuclear Information System (INIS)

Woodall, D.M.

1996-01-01

A University Working Conference (UWC) sponsored by the American Nuclear Society (ANS) was held on June 14 and 15, 1996, prior to the ANS Annual Meeting in Reno, Nevada. With a theme of open-quotes Building on the Past, Planning for the Future,close quotes the meeting was the successor to the first UWC held in Philadelphia, Pennsylvania, in 1995. This workshop refined the recommendations to the national nuclear engineering academic community of the earlier UWC on strategies for success in the 21st century. This UWC had 40 attendees from academe and industry, and the program was developed around the outcomes of the Philadelphia meeting. The general chair of UWC96 was Don Miller of Ohio State University, while the author of this paper served as the technical program chair. Assistant technical program chairs included Madeline Feltus of Pennsylvania State University, Dan Bullen of Iowa State University, and Gilbert Brown of the University of Massachusetts Lowell. A working conference is often loosely structured, with an informal, flexible program, consisting of a few highlight or keynote presentations followed by workshop sessions devoted to a theme area. The workshop sessions at this meeting included the following: 1. strategic planning in today's climate; 2. university/industry research collaboration; 3. profiles of nuclear engineering and radiological engineering students, now and in the future; 4. accreditation issues, especially ABET's engineering 2000; 5. employment of nuclear and radiological engineers; 6. new program thrusts in nuclear engineering departments; 7. uses of new technology in the classroom and laboratory; 8. internet access to information for education; 9. distance education/remote delivery of curricula

Positive futures? The impact of HIV infection on achieving health, wealth and future planning.

Science.gov (United States)

Harding, Richard; Molloy, Tim

2008-05-01

Although HIV is now cast as a chronic condition with favourable clinical outcomes under new treatments, it is unclear how living with HIV affects expectations and planning for the future. This mixed-methods study aimed to investigate UK gay men's expectations of their own future when living with HIV, and to identify the heath and social interventions required to enhance roles, participation and personal fulfilment. A preliminary focus group identified relevant domains of enquiry for a subsequent online cross-sectional survey. A total of 347 gay men living in the UK with HIV participated in the survey, and 56.6% were currently on treatment. However, high 7-day prevalence of psychological and physical symptoms was identified (42.6% in pain, 80.2% worrying); 57.8% perceived reduced career options due to their infection and 71.8% reduced life expectancy. Being on treatment was not significantly associated with perceived life expectancy. Coded open-ended survey data identified eight principle themes related to goal planning and attainment. The integrated open and closed data items offer an understanding of barriers and challenges that focus on poor mental health due to clinical inattention, discrimination and stigma, poor career and job opportunities due to benefit and workplace inflexibility and lack of understanding, a lack of personal goals and associated skills deficit related to confidence and self esteem. Gay men living with HIV require an integrated holistic approach to wellbeing that incorporates clinical, social and individual intervention in order to lead productive lives with maximum benefit from treatment gains.

Planning future care services: Analyses of investments in Norwegian municipalities.

Science.gov (United States)

Hagen, Terje P; Tingvold, Laila

2018-06-01

To analyse whether the Norwegian Central Government's goal of subsidizing 12,000 places in nursing homes or sheltered housing using an earmarked grant was reached and to determine towards which group of users the planned investments were targeted. Data from the investment plans at municipal level were provided by the Norwegian Housing Bank and linked to variables describing the municipalities' financial situation as well as variables describing the local needs for services provided by Statistics Norway. Using regression analyses we estimated the associations between municipal characteristics and planned investments in total and by type of care place. The Norwegian Central Government reached its goal of giving subsidies to 12,000 new or rebuilt places in nursing homes and sheltered housing. A total of 54% of the subsidies (6878 places) were given to places in nursing homes. About 7500 places were available by the end of the planning period and the rest were under construction. About 50% of the places were planned for user groups aged Investments in nursing homes were correlated with the share of the population older than 80 years and investments in sheltered houses were correlated with the share of users with intellectual disabilities. Earmarked grants to municipalities can be adequate measures to affect local resource allocation and thereby stimulate investments in future care. With the current institutional setup the municipalities adapt investments to local needs.

Food irradiation: current problems and future potential

International Nuclear Information System (INIS)

Kilcast, D.

1995-01-01

Food irradiation is one of a set of processing technologies that can be used to increase the microbiological safety and shelf-life of a wide range of foods. Ionizing radiation is used to generate highly active chemical species within the food, which react with DNA. Under normal usage conditions, the food receives a pasteurizing treatment that gives a valuable reduction in common food-spoilage organisms and food pathogens. This review describes how the process is used in practice, including the benefits and limitations. The nature of changes to food components are outlined, together with the development of practical detection methods that utilize these changes. The legislative position of food irradiation is outlined, with the specific example of the introduction of the technology within the UK. The reasons for the slow uptake in the use of the technology are discussed, and the problem of consumer acceptance is addressed. (author)

SU-E-T-393: Evaluation of Large Field IMRT Versus RapidArc Planning for Carcinoma Cervix with Para-Aotic Node Irradiation

International Nuclear Information System (INIS)

Raman, S Kothanda; Girigesh, Y; MISHRA, M; Lalit, K

2015-01-01

Purpose: The objective of this work is to evaluate and compare Large field IMRT and RapidArc planning for Carcinoma Cervix and Para-aotic node irradiation. Methods: In this study, ten patients of Cervix with para-aotic node have been selected with PTV length 35+2cm. All plans were generated in Eclipse TPS V10.0 with Dynamic IMRT and RapidArc technique using 6MV photon energy. In IMRT planning, 7 fields were chosen to get optimal plan and in RapidArc, double Full arc clockwise and counter clockwise were used for planning. All the plans were generated with single isocenter and calculated using AAA dose algorithm. For all the cases the prescribed dose to PTV was same and the plan acceptance criteria is; 95% of the PTV volume should receive 100% prescribed dose. The tolerance doses for the OAR’s is also taken in to account. The evaluation criteria used for analysis are; 1) Homogeneity Index, 2) Conformity Index, 3) Mean Dose to OAR’s, 4)Total monitor units delivered. Results: DVH analysis were performed for both IMRT and RapidArc planning. In both the plans, 95% of PTV volume receives prescribed dose and maximum dose are less than 107%. The conformity index are same in both the techniques. The mean Homogeneity index are 1.036 and 1.053 for IMRT and RapidArc plan. The mean (mean + SD) dose of bladder and rectum in IMRT is 44.2+1.55, 42.05+2.52 and RapidArc is 46.66+1.6, 44.2+2.75 respectively. There is no significant difference found in Right Femoral head, Left Femoral head and Kidney doses. It is found that total MU’s are more in IMRT compared with RapidArc planning. Conclusion: In the case of cervix with Para-arotic node single isocenter irradiation, IMRT planning in large-field is better compared to RapidArc planning in terms of Homogeneity Index and mean dose of Bladder and Rectum

SU-E-T-393: Evaluation of Large Field IMRT Versus RapidArc Planning for Carcinoma Cervix with Para-Aotic Node Irradiation

Energy Technology Data Exchange (ETDEWEB)

Raman, S Kothanda; Girigesh, Y; MISHRA, M; Lalit, K [Rajiv Gandhi Cancer Institute & Research Centre, New Delhi (India)

2015-06-15

Purpose: The objective of this work is to evaluate and compare Large field IMRT and RapidArc planning for Carcinoma Cervix and Para-aotic node irradiation. Methods: In this study, ten patients of Cervix with para-aotic node have been selected with PTV length 35+2cm. All plans were generated in Eclipse TPS V10.0 with Dynamic IMRT and RapidArc technique using 6MV photon energy. In IMRT planning, 7 fields were chosen to get optimal plan and in RapidArc, double Full arc clockwise and counter clockwise were used for planning. All the plans were generated with single isocenter and calculated using AAA dose algorithm. For all the cases the prescribed dose to PTV was same and the plan acceptance criteria is; 95% of the PTV volume should receive 100% prescribed dose. The tolerance doses for the OAR’s is also taken in to account. The evaluation criteria used for analysis are; 1) Homogeneity Index, 2) Conformity Index, 3) Mean Dose to OAR’s, 4)Total monitor units delivered. Results: DVH analysis were performed for both IMRT and RapidArc planning. In both the plans, 95% of PTV volume receives prescribed dose and maximum dose are less than 107%. The conformity index are same in both the techniques. The mean Homogeneity index are 1.036 and 1.053 for IMRT and RapidArc plan. The mean (mean + SD) dose of bladder and rectum in IMRT is 44.2+1.55, 42.05+2.52 and RapidArc is 46.66+1.6, 44.2+2.75 respectively. There is no significant difference found in Right Femoral head, Left Femoral head and Kidney doses. It is found that total MU’s are more in IMRT compared with RapidArc planning. Conclusion: In the case of cervix with Para-arotic node single isocenter irradiation, IMRT planning in large-field is better compared to RapidArc planning in terms of Homogeneity Index and mean dose of Bladder and Rectum.

Planned obsolescence publishing, technology, and the future of the academy

CERN Document Server

Fitzpatrick, Kathleen

2011-01-01

Academic institutions are facing a crisis in scholarly publishing at multiple levels: presses are stressed as never before, library budgets are squeezed, faculty are having difficulty publishing their work, and promotion and tenure committees are facing a range of new ways of working without a clear sense of how to understand and evaluate them. Planned Obsolescence is both a provocation to think more broadly about the academy’s future and an argument for reconceiving that future in more communally-oriented ways. Facing these issues head-on, Kathleen Fitzpatrick focuses on the technological changes—especially greater utilization of internet publication technologies, including digital archives, social networking tools, and multimedia—necessary to allow academic publishing to thrive into the future. But she goes further, insisting that the key issues that must be addressed are social and institutional in origin. Springing from original research as well as Fitzpatrick’s own hands-on experiments in ne...

Planning, Implementation and Optimization of Future space Missions using an Immersive Visualization Environement (IVE) Machine

Science.gov (United States)

Harris, E.

Planning, Implementation and Optimization of Future Space Missions using an Immersive Visualization Environment (IVE) Machine E. N. Harris, Lockheed Martin Space Systems, Denver, CO and George.W. Morgenthaler, U. of Colorado at Boulder History: A team of 3-D engineering visualization experts at the Lockheed Martin Space Systems Company have developed innovative virtual prototyping simulation solutions for ground processing and real-time visualization of design and planning of aerospace missions over the past 6 years. At the University of Colorado, a team of 3-D visualization experts are developing the science of 3-D visualization and immersive visualization at the newly founded BP Center for Visualization, which began operations in October, 2001. (See IAF/IAA-01-13.2.09, "The Use of 3-D Immersive Visualization Environments (IVEs) to Plan Space Missions," G. A. Dorn and G. W. Morgenthaler.) Progressing from Today's 3-D Engineering Simulations to Tomorrow's 3-D IVE Mission Planning, Simulation and Optimization Techniques: 3-D (IVEs) and visualization simulation tools can be combined for efficient planning and design engineering of future aerospace exploration and commercial missions. This technology is currently being developed and will be demonstrated by Lockheed Martin in the (IVE) at the BP Center using virtual simulation for clearance checks, collision detection, ergonomics and reach-ability analyses to develop fabrication and processing flows for spacecraft and launch vehicle ground support operations and to optimize mission architecture and vehicle design subject to realistic constraints. Demonstrations: Immediate aerospace applications to be demonstrated include developing streamlined processing flows for Reusable Space Transportation Systems and Atlas Launch Vehicle operations and Mars Polar Lander visual work instructions. Long-range goals include future international human and robotic space exploration missions such as the development of a Mars

Proceedings of 2005 JAEA-KAERI joint seminar on advanced irradiation and PIE technologies

International Nuclear Information System (INIS)

2006-05-01

In this seminar, total participants of over 100 were jointed from JAEA, KAERI, Hanyang University, Chungnam National University, Kyung Hee University, Oarai Branch of Institute for Materials Research (IMR) of Tohoku University, Nippon Nuclear Fuel Development Co., Ltd., Nuclear Development Corporation and others. The technical development and experimental data on the irradiation test and PIE were aggressively discussed in this seminar. Contributed presentations were 35 in three sessions; Current status and future program on irradiation test and PIE (10 presentations), Development of irradiation and PIE technologies (15 presentations) and Evaluation of irradiation and PIE data (10 presentations). Development of instrumented capsule technologies for HANARO irradiation, current PIE activities in each hot laboratory of both countries, development of irradiation capsules in JMTR for the Irradiation Assisted Stress Corrosion Cracking (IASCC) study, development of irradiation and PIE techniques for the safety research on the high burnup fuel, utilization plan of JOYO and development of MOX fuel containing americium have been widely noticed as topic items on irradiation and PIE technologies. This proceedings is containing papers presented in the 2005 JAEA-KAERI Joint Seminar. It also indicates the current status of the aggressive information exchange activity on two fields of irradiation test and PIE technologies between JAEA and KAERI under the Arrangement for the Implementation of Cooperative Research Program mentioned above. The 35 of the presented papers are indexed individually. (J.P.N.)

Future Ready Learning: Reimagining the Role of Technology in Education. 2016 National Education Technology Plan

Science.gov (United States)

Thomas, Susan

2016-01-01

The National Education Technology Plan is the flagship educational technology policy document for the United States. The 2016 Plan, "Future Ready Learning: Reimagining the Role of Technology in Education," articulates a vision of equity, active use, and collaborative leadership to make everywhere, all-the-time learning possible. While…

Deja vu: The Unified Command Plan of the Future Revisited

Science.gov (United States)

2011-05-19

Approved for Public Release; Distribution is Unlimited Déjà vu : The Unified Command Plan of the Future Revisited A Monograph by Lieutenant...DD-MM-YYYY) 19-05-2011 2. REPORT TYPE Monograph 3. DATES COVERED (From - To) JUL 2010 – MAY 2011 4. TITLE AND SUBTITLE Déjà vu : The Unified...i SCHOOL OF ADVANCED MILITARY STUDIES MONOGRAPH APPROVAL Lieutenant Colonel Edward Francis Martignetti Title of Monograph: Déjà vu : The Unified

Multiscale Simulation of Thermo-mechancial Processes in Irradiated Fission-reactor Materials.

Energy Technology Data Exchange (ETDEWEB)

Simon R. Phillpot

2012-06-08

The work funded from this project has been published in six papers, with two more in draft form, with submission planned for the near future. The papers are: (1) Kinetically-Evolving Irradiation-Induced Point-Defect Clusters in UO{sub 2} by Molecular-Dynamics Simulation; (2) Kinetically driven point-defect clustering in irradiated MgO by molecular-dynamics simulation; (3) Grain-Boundary Source/Sink Behavior for Point Defect: An Atomistic Simulation Study; (4) Energetics of intrinsic point defects in uranium dioxide from electronic structure calculations; (5) Thermodynamics of fission products in UO{sub 2{+-}x}; and (6) Atomistic study of grain boundary sink strength under prolonged electron irradiation. The other two pieces of work that are currently being written-up for publication are: (1) Effect of Pores and He Bubbles on the Thermal Transport Properties of UO2 by Molecular Dynamics Simulation; and (2) Segregation of Ruthenium to Edge Dislocations in Uranium Dioxide.

Food irradiation: fiction and reality

International Nuclear Information System (INIS)

1991-01-01

The International Consultative Group on Food Irradiation (IGCFI), sponsored by World Health Organization (WHO), Food and Agriculture Organization (FAO) and the International Atomic Energy Agency (IAEA), with the intention to provide to governments, especially those of developing countries, scientifically correct information about food irradiation, decided to organize a file and questions of general public interest. The document is composed by descriptive files related with the actual situation and future prospective, technical and scientific terms, food irradiation and the radioactivity, chemical transformations in irradiated food, genetic studies, microbiological safety of irradiated food, irradiation and harmlessness, irradiation and additives, packing, irradiation facilities control, process control, irradiation costs and benefits as well as consumers reaction

Irradiation test plan of the simulated DUPIC fuel

Energy Technology Data Exchange (ETDEWEB)

Bae, Ki Kwang; Yang, M. S.; Kim, B. K. [Korea Atomic Energy Research Institute, Taejon (Korea)

1999-11-01

Simulated DUPIC fuel had been irradiated from Aug. 4, 1999 to Oct. 4 1999, in order to produce the data of its in-core behavior, to verify the design of DUPIC non-instrumented capsule developed, and to ensure the irradiation requirements of DUPIC fuel at HANARO. The welding process was certified for manufacturing the mini-element, and simulated DUPIC fuel rods were manufactured with simulated DUPIC pellets through examination and test. The non-instrumented capsule for a irradiation test of DUPIC fuel has been designed and manufactured referring to the design specification of the HANARO fuel. This is to be the design basis of the instrumented capsule under consideration. The verification experiment, whether the capsule loaded in the OR4 hole meet the HANARO requirements under the normal operation condition, as well as the structural analysis was carried out. The items for this experiment were the pressure drop test, vibration test, integrity test, et. al. It was noted that each experimental result meet the HANARO operational requirements. For the safety analysis of the DUPIC non-instrumented capsule loaded in the HANARO core, the nuclear/mechanical compatibility, thermodynamic compatibility, integrity analysis of the irradiation samples according to the reactor condition as well as the safety analysis of the HANARO were performed. Besides, the core reactivity effects were discussed during the irradiation test of the DUPIC capsule. The average power of each fuel rod in the DUPIC capsule was calculated, and maximal linear power reflecting the axial peaking power factor from the MCNP results was evaluated. From these calculation results, the HANARO core safety was evaluated. At the end of this report, similar overseas cases were introduced. 9 refs., 16 figs., 10 tabs. (Author)

Pediatric hospital medicine: a strategic planning roundtable to chart the future.

Science.gov (United States)

Rauch, Daniel A; Lye, Patricia S; Carlson, Douglas; Daru, Jennifer A; Narang, Steve; Srivastava, Rajendu; Melzer, Sanford; Conway, Patrick H

2012-04-01

Given the growing field of Pediatric Hospital Medicine (PHM) and the need to define strategic direction, the Society of Hospital Medicine, the American Academy of Pediatrics, and the Academic Pediatric Association sponsored a roundtable to discuss the future of the field. Twenty-one leaders were invited plus a facilitator utilizing established health care strategic planning methods. A "vision statement" was developed. Specific initiatives in 4 domains (clinical practice, quality of care, research, and workforce) were identified that would advance PHM with a plan to complete each initiative. Review of the current issues demonstrated gaps between the current state of affairs and the full vision of the potential impact of PHM. Clinical initiatives were to develop an educational plan supporting the PHM Core Competencies and a clinical practice monitoring dashboard template. Quality initiatives included an environmental assessment of PHM participation on key committees, societies, and agencies to ensure appropriate PHM representation. Three QI collaboratives are underway. A Research Leadership Task Force was created and the Pediatric Research in Inpatient Settings (PRIS) network was refocused, defining a strategic framework for PRIS, and developing a funding strategy. Workforce initiatives were to develop a descriptive statement that can be used by any PHM physician, a communications tool describing "value added" of PHM; and a tool to assess career satisfaction among PHM physicians. We believe the Roundtable was successful in describing the current state of PHM and laying a course for the near future. Copyright © 2011 Society of Hospital Medicine.

Highways of the future : a strategic plan for highway infrastructure research and development

Science.gov (United States)

2008-07-01

This Highways of the FutureA Strategic Plan for Highway Infrastructure Research and Development was developed in response to a need expressed by the staff of the Federal Highway Administration (FHWA) Office of Infrastructure Research and Developme...

Initial results of irradiation for prostatic cancer following three-dimensional treatment planning. Irradiation technique and toxicity

International Nuclear Information System (INIS)

Wiegel, T.; Schmidt, R.; Baumann, M.; Schwarz, R.; Steiner, P.; Arps, H.; Goeckel-Beining, B.

1994-01-01

During the period from June 91 until May 93 thirty-three patients suffering from histologically confirmed carcinoms of the prostate were assigned to four treatment groups and subjected to irradiation of the prostate and, if required, efferent lymphatic system of the minor pelvis that was performed according to a three-dimensional prospective treatment plan. The doses used for localized radiotherapy of the tumour tissue were in the range between 62 and 70 Gy, the efferent lymph system of the minor pelvis was irradiated with doses of up to 50 Gy. The local or boost treatments were carried out using four (box technique) or five irregular fields, while radiotherapy of the minor pelvis was solely based on the box technique using four fields of irregular shape. The immediate and long-term toxicity was evaluated in a prospective approach according to the RTOG score for the rectum, urinary bladder and skin. Twenty-five of the thirty-three patients (76%) developed immediate toxic symptoms. Immediate reactions classifiable with degree II of the rating scale were, however, only observed in four patients (15%) for the rectum (2), bladder (1) and skin (1). Immediate toxic reactions compatible with RTOG grades III or IV were not recorded. In all patients, the untoward effects were completely reversed within a maximum period of 6 weeks following termination of treatment. Two patients from the study cohort (6%), which has so far been followed up for an average period of 16 months, showed long-term grade I effects in the rectum and a further long-term effect observed in the urinary bladder of another patient was classified with degree II. Two patients died intercurrently and two patients developed metastases remote from the primary tumour. Local tumour control can currently be reported for 96%. (orig.) [de

Planned Change in Future Models of Project Follow Through: A Concept Paper.

Science.gov (United States)

Simpkins, Edward; Brown, Asa

The three chapters included in this paper establish a basis for organizing future implementations of Project Follow Through. Specifically, chapter 1 identifies four planning objectives for coordinating such programs. Emphasis is given to the need to focus on one fundamental, pervasive variable possibly accounting for program success: time…

Irradiation damage

International Nuclear Information System (INIS)

Howe, L.M.

2000-01-01

There is considerable interest in irradiation effects in intermetallic compounds from both the applied and fundamental aspects. Initially, this interest was associated mainly with nuclear reactor programs but it now extends to the fields of ion-beam modification of metals, behaviour of amorphous materials, ion-beam processing of electronic materials, and ion-beam simulations of various kinds. The field of irradiation damage in intermetallic compounds is rapidly expanding, and no attempt will be made in this chapter to cover all of the various aspects. Instead, attention will be focused on some specific areas and, hopefully, through these, some insight will be given into the physical processes involved, the present state of our knowledge, and the challenge of obtaining more comprehensive understanding in the future. The specific areas that will be covered are: point defects in intermetallic compounds; irradiation-enhanced ordering and irradiation-induced disordering of ordered alloys; irradiation-induced amorphization

Irradiation damage

Energy Technology Data Exchange (ETDEWEB)

Howe, L.M

2000-07-01

There is considerable interest in irradiation effects in intermetallic compounds from both the applied and fundamental aspects. Initially, this interest was associated mainly with nuclear reactor programs but it now extends to the fields of ion-beam modification of metals, behaviour of amorphous materials, ion-beam processing of electronic materials, and ion-beam simulations of various kinds. The field of irradiation damage in intermetallic compounds is rapidly expanding, and no attempt will be made in this chapter to cover all of the various aspects. Instead, attention will be focused on some specific areas and, hopefully, through these, some insight will be given into the physical processes involved, the present state of our knowledge, and the challenge of obtaining more comprehensive understanding in the future. The specific areas that will be covered are: point defects in intermetallic compounds; irradiation-enhanced ordering and irradiation-induced disordering of ordered alloys; irradiation-induced amorphization.

Land use planning and wildfire: development policies influence future probability of housing loss

Science.gov (United States)

Syphard, Alexandra D.; Massada, Avi Bar; Butsic, Van; Keeley, Jon E.

2013-01-01

Increasing numbers of homes are being destroyed by wildfire in the wildland-urban interface. With projections of climate change and housing growth potentially exacerbating the threat of wildfire to homes and property, effective fire-risk reduction alternatives are needed as part of a comprehensive fire management plan. Land use planning represents a shift in traditional thinking from trying to eliminate wildfires, or even increasing resilience to them, toward avoiding exposure to them through the informed placement of new residential structures. For land use planning to be effective, it needs to be based on solid understanding of where and how to locate and arrange new homes. We simulated three scenarios of future residential development and projected landscape-level wildfire risk to residential structures in a rapidly urbanizing, fire-prone region in southern California. We based all future development on an econometric subdivision model, but we varied the emphasis of subdivision decision-making based on three broad and common growth types: infill, expansion, and leapfrog. Simulation results showed that decision-making based on these growth types, when applied locally for subdivision of individual parcels, produced substantial landscape-level differences in pattern, location, and extent of development. These differences in development, in turn, affected the area and proportion of structures at risk from burning in wildfires. Scenarios with lower housing density and larger numbers of small, isolated clusters of development, i.e., resulting from leapfrog development, were generally predicted to have the highest predicted fire risk to the largest proportion of structures in the study area, and infill development was predicted to have the lowest risk. These results suggest that land use planning should be considered an important component to fire risk management and that consistently applied policies based on residential pattern may provide substantial benefits for

Unraveling the Importance of Climate Change Resilience in Planning the Future Sustainable Energy System

Science.gov (United States)

Tarroja, B.; AghaKouchak, A.; Forrest, K.; Chiang, F.; Samuelsen, S.

2017-12-01

In response to concerns regarding the environmental impacts of the current energy resource mix, significant research efforts have been focused on determining the future energy resource mix to meet emissions reduction and environmental sustainability goals. Many of these studies focus on various constraints such as costs, grid operability requirements, and environmental performance, and develop different plans for the rollout of energy resources between the present and future years. One aspect that has not yet been systematically taken into account in these planning studies, however, is the potential impacts that changing climates may have on the availability and performance of key energy resources that compose these plans. This presentation will focus on a case study for California which analyzes the impacts of climate change on the greenhouse gas emissions and renewable resource utilization of an energy resource plan developed by Energy Environmental Economics for meeting the state's year 2050 greenhouse gas goal of 80% reduction in emissions by the year 2050. Specifically, climate change impacts on three aspects of the energy system are investigated: 1) changes in hydropower generation due to altered precipitation, streamflow and runoff patterns, 2) changes in the availability of solar thermal and geothermal power plant capacity due to shifting water availability, and 3) changes in the residential and commercial electric building loads due to increased temperatures. These impacts were discovered to cause the proposed resource plan to deviate from meeting its emissions target by up to 5.9 MMT CO2e/yr and exhibit a reduction in renewable resource penetration of up to 3.1% of total electric energy. The impacts of climate change on energy system performance were found to be mitigated by increasing the flexibility of the energy system through increased storage and electric load dispatchability. Overall, this study highlights the importance of taking into account and

AFP: First Experience with Data and Future Plans

CERN Document Server

Gach, Grzegorz; The ATLAS collaboration

2017-01-01

The aim of the ATLAS Forward Proton (AFP) detector system is the measurement of protons scattered diffractively or electromagnetically at very small angles. The first arm of the system was installed last year and AFP took data in several commissioning and physics runs. The installation of the second arm is ongoing and will be completed in time for the 2017 data taking period. This will allow measurements of processes with two forward protons: central diffraction, exclusive production, and two-photon processes. During the presentation, the early results and experience from the first year of data taking will be presented together with the status of the second-arm installation and plans for the future.

AFP: First experience with data and future plans

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00184415; The ATLAS collaboration

2017-01-01

The ATLAS Forward Proton (AFP) detector system aims at the measurement of protons scattered diffractively or electromagnetically at very small angles. The first arm of the system was installed in 2016 and AFP took data in several commissioning and physics runs. The installation of the second arm is ongoing and will be completed in time for the 2017 data taking period. This will allow the measurements of processes with two tagged forward protons being a signature of: central diffraction, exclusive production, and two-photon processes. The early results and experience from the first year of data taking is presented together with the status of the secondarm installation and plans for the future.

The development of mentoring-relationship quality, future-planning style, and career goal setting among adolescents from a disadvantaged background.

Science.gov (United States)

Lau, Wendy S Y; Zhou, Xiao-Chun; Lai, Simon M K

2017-03-01

Our behaviors are regulated by our perception of the future based on past experiences and knowledge. Children from a disadvantaged background might encounter obstacles more frequently when they plan their future. It is possible that a good relationship with an adult volunteer who provides assistance and guidance in the disadvantaged youth's development may facilitate their future-planning style and career goal setting. The present study investigated the role of a good mentoring relationship in promoting a disadvantaged youth's future-planning style and goal-setting ability. It focused on children from a disadvantaged background who participated in the Child Development Fund (CDF) in Hong Kong. In the study, 187 CDF participants (93 with high mentoring-relationship quality [MRQ] and 94 with low MRQ) and 208 comparison group participants were able to complete all four times of the survey. Repeated-measures analyses of covariance showed that Group main effects were observed for both future-planning style, F(2, 374) = 5.92, p career goal-setting self-efficacy, F(2, 376) = 6.07, p planning style only, F(5.78, 1081.21) = 2.17, p planning style and career goal-setting self-efficacy. Multiple regression analyses revealed that mean MRQ score accounted for 3.9% (p planning style and 4.1% (p career goal-setting self-efficacy, supporting the role of a good mentoring relationship. Mentors have introduced new resources to the disadvantaged youths with high MRQ and have promoted the development of various skills through modeling. © 2017 The Institute of Psychology, Chinese Academy of Sciences and John Wiley & Sons Australia, Ltd.

Futuring, Strategic Planning and Shared Awareness: An Ohio University Libraries' Case Study

Science.gov (United States)

Staley, David J.; Seaman, Scott; Theodore-Shusta, Eileen

2012-01-01

A critical component of strategic planning is creating a shared-awareness among library staff of the potential societal, political, economic and technological changes that will influence how future users will create and consume scholarly materials, what will be expected of library services, and how facilities will be used. The ACRL Futuring…

The JET Intershot Analysis: Current infrastructure and future plans

International Nuclear Information System (INIS)

Layne, R.; Cook, N.; Harting, D.; McDonald, D.C.; Tidy, C.

2010-01-01

The JET Intershot Analysis (Chain1) generates processed data following a pulse. Maintaining the pulse repetition rate is one of JET's key success factors, so performance of Chain1 is crucial. This paper will describe JET's experience of managing Chain1, including a description of the control system used to ensure the analysis chain runs as quickly as possible, and a discussion of JET's experience of integrating externally developed codes into a standard analysis framework. The current Chain1 infrastructure was developed in 1999 and although reliable and efficient is starting to prove costly in terms of flexibility and extensibility to meet JET's current and future needs. For this reason JET is planning to re-implement the Chain1 system. The paper will outline the work done towards this aim, and present a model of the proposed new system. Finally, possible future steps towards an integrated data production chain for JET will be discussed, and the potential applicability to next generation fusion devices will be outlined.

Total scalp irradiation using helical tomotherapy

International Nuclear Information System (INIS)

Orton, Nigel; Jaradat, Hazim; Welsh, James; Tome, Wolfgang

2005-01-01

Homogeneous irradiation of the scalp poses technical and dosimetric challenges due to the extensive, superficial, curved treatment volume. Conventional treatments on a linear accelerator use multiple matched electron fields or a combination of electron and photon fields. Problems with these techniques include dose heterogeneity in the target due to varying source-to-skin distance (SSD) and angle of beam incidence, significant dose to the brain, and the potential for overdose or underdose at match lines between the fields. Linac-based intensity-modulated radiation therapy (IMRT) plans have similar problems. This work presents treatment plans for total scalp irradiation on a helical tomotherapy machine. Helical tomotherapy is well-suited for scalp irradiation because it has the ability to deliver beamlets that are tangential to the scalp at all points. Helical tomotherapy also avoids problems associated with field matching and use of more than one modality. Tomotherapy treatment plans were generated and are compared to plans for treatment of the same patient on a linac. The resulting tomotherapy plans show more homogeneous target dose and improved critical structure dose when compared to state-of-the-art linac techniques. Target equivalent uniform dose (EUD) for the best tomotherapy plan was slightly higher than for the linac plan, while the volume of brain tissue receiving over 30 Gy was reduced by two thirds. Furthermore, the tomotherapy plan can be more reliably delivered than linac treatments, because the patient is aligned prior to each treatment based on megavoltage computed tomography (MVCT)

Characterisation of the epithermal neutron irradiation facility at the Portuguese research reactor using MCNP.

Science.gov (United States)

Beasley, D G; Fernandes, A C; Santos, J P; Ramos, A R; Marques, J G; King, A

2015-05-01

The radiation field at the epithermal beamline and irradiation chamber installed at the Portuguese Research Reactor (RPI) at the Campus Tecnológico e Nuclear of Instituto Superior Técnico was characterised in the context of Prompt Gamma Neutron Activation Analysis (PGNAA) applications. Radiographic films, activation foils and thermoluminescence dosimeters were used to measure the neutron fluence and photon dose rates in the irradiation chamber. A fixed-source MCNPX model of the beamline and chamber was developed and compared to measurements in the first step towards planning a new irradiation chamber. The high photon background from the reactor results in the saturation of the detector and the current facility configuration yields an intrinsic insensitivity to various elements of interest for PGNAA. These will be addressed in future developments. Copyright © 2015 Elsevier Ltd. All rights reserved.

Planning for Future Care and the End of Life: A Qualitative Analysis of Gay, Lesbian, and Heterosexual Couples.

Science.gov (United States)

Thomeer, Mieke Beth; Donnelly, Rachel; Reczek, Corinne; Umberson, Debra

2017-12-01

Two key components of end-of-life planning are (1) informal discussions about future care and other end-of-life preferences and (2) formal planning via living wills and other legal documents. We leverage previous work on the institutional aspects of marriage and on sexual-minority discrimination to theorize why and how heterosexual, gay, and lesbian married couples engage in informal and formal end-of-life planning. We analyze qualitative dyadic in-depth interviews with 45 midlife gay, lesbian, and heterosexual married couples ( N = 90 spouses). Findings suggest that same-sex spouses devote considerable attention to informal planning conversations and formal end-of-life plans, while heterosexual spouses report minimal formal or informal planning. The primary reasons same-sex spouses give for making end-of-life preparations are related to the absence of legal protections and concerns about discrimination from families. These findings raise questions about future end-of-life planning for same- and different-sex couples given a rapidly shifting legal and social landscape.

Investigation of special capsule technologies for material in-pile irradiation test and development plan in HANARO

Energy Technology Data Exchange (ETDEWEB)

Cho, M. S.; Son, J. M.; Kim, D. S.; Park, S. J.; Cho, Y. G.; Seo, C. K.; Kang, Y. H. [KAERI, Taejon (Korea, Republic of)

2002-10-01

In-pile test for several materials such as Zr alloy, stainless steel, Cr-Ni steel etc. which are used as structural material of the advanced reactor and KNGR(Korea Next Generation Reactor) like SMART, is necessary to produce the design data for developing new reactor materials. Advanced countries like USA, Europe and Japan etc. are not only performing the simple irradiation test for materials, but developing many kinds of special capsule to perform in-pile test having special purpose. For the special test items of fuel rod, fission products, total heat generation, swelling, deformation, sweep gas, temperature ramping and BOCA etc. are being actively concerned. There are capsules measuring creep, fatigue, crack growth, and controlling fluence etc. for special irradiation test of materials. In addition, the advanced countries are developing several instrument technologies suitable for the special capsules. In HANARO, non-instrumented, instrumented material capsules and non-instrumented fuel capsule have been developed and they have been utilized in the irradiation test for users, and creep capsule loading single specimen was made and is planned to test in the reactor soon. For some forthcoming years, special capsules not only measuring creep deformation with multi-specimens, fatigue, controlling fluence but crack propagation and gas sweep considering the requirements of users will be developed in HANARO.

Status of the SNS superconducting linac and future plan

International Nuclear Information System (INIS)

Kim, Sang-Ho

2008-01-01

The use of superconducting radiofrequency (SRF) cavities in particle accelerator is becoming more widespread. Among the projects that make use of that technology is the Spallation Neutron Source, where H- ions are accelerated to about 1 GeV, mostly making use of niobium elliptical cavities. SNS generates neutrons by the spallation reaction with the accelerated short (about 700 ns) sub-bunches of protons, which will in turn allow probing structural and magnetic properties of new and existing materials. The SNS superconducting linac is the largest application of RF superconductivity to come on-line in the last decade and has been operating with beam for almost two years. As the first operational pulsed superconducting linac, many of the aspects of its performance were unknown and unpredictable. A lot of experiences and data have been gathered on the pulsed behavior of cavities and cryomodules at various repetition rates and at various temperatures during the commissioning of its components and beam operations. This experience is of great value in determining future optimizations of SNS as well in guiding in the design and operation of future pulsed superconducting linacs. The testing of the superconducting cavities, the operating experience with beam, the performance of the superconducting linac and the future plans will be presented.

A review of the irradiation evolution of dispersed oxide nanoparticles in the b.c.c. Fe-Cr system: Current understanding and future directions

Energy Technology Data Exchange (ETDEWEB)

Wharry, Janelle P., E-mail: jwharry@purdue.edu [Purdue University, 400 Central Drive, West Lafayette, IN 47907 (United States); Swenson, Matthew J.; Yano, Kayla H. [Boise State University, 1910 University Drive, Boise, ID 83725 (United States)

2017-04-01

Thus far, a number of studies have investigated the irradiation evolution of oxide nanoparticles in b.c.c. Fe-Cr based oxide dispersion strengthened (ODS) alloys. But given the inconsistent experimental conditions, results have been widely variable and inconclusive. Crystal structure and chemistry changes differ from experiment to experiment, and the total nanoparticle volume fraction has been observed to both increase and decrease. Furthermore, there has not yet been a comprehensive review of the archival literature. In this paper, we summarize the existing studies on nanoparticle irradiation evolution. We note significant observations with respect to oxide nanoparticle crystallinity, composition, size, and number density. We discuss four possible contributing mechanisms for nanoparticle evolution: ballistic dissolution, Ostwald ripening, irradiation-enhanced diffusion, and homogeneous nucleation. Finally, we propose future directions to achieve a more comprehensive understanding of irradiation effects on oxide nanoparticles in ODS alloys.

A Japanese prospective multi-institutional feasibility study on accelerated partial breast irradiation using interstitial brachytherapy: treatment planning and quality assurance

International Nuclear Information System (INIS)

Otani, Yuki; Nose, Takayuki; Dokiya, Takushi; Saeki, Toshiaki; Kumazaki, Yu

2015-01-01

In Japan, breast-conserving surgery with closed cavity has generally been performed for breast cancer patients, and accelerated partial breast irradiation (APBI) is considered difficult because Asian females generally have smaller breast sizes than Western females. Therefore, common identification of target and treatment plan method in APBI is required. A prospective multicenter study was conducted in Japan to determine institutional compliance with APBI using high-dose-rate interstitial brachytherapy (ISBT) designed for Japanese female patients. For this study, 46 patients were recruited at eight institutions from January 2009 to December 2011. The reproducibility of the ISBT–APBI plan was evaluated using three criteria: (1) minimum clinical target volume dose with a clip dose ≥ 6 Gy/fraction, (2) irradiated volume constraint of 40-150 cm 3 , and (3) uniformity of dose distribution, expressed as the dose non-uniformity ratio (DNR, V150/V100) < 0.35. The ISBT–APBI plan for each patient was considered reproducible when all three criteria were met. When the number of non-reproducible patients was ≤ 4 at study completion, APBI at this institution was considered statistically reproducible. Half of the patients (52 %) had a small bra size (A/B cup). The mean values of the dose-constrained parameters were as follows: Vref, 117 cm 3 (range, 40-282), DNR, 0.30 (range, 0.22-0.51), and clip dose, 784 cGy (range, 469-3146). A total of 43/46 treatment plans were judged to be compliant and ISBT–APBI was concluded to be reproducible. This study showed that multi-institutional ISBT–APBI treatment plan was reproducible for small breast patient with closed cavity

Determining the future for irradiated graphite disposal

International Nuclear Information System (INIS)

Neighbour, G.B.; Wickham, A.J.; Hacker, P.J.

2000-01-01

In recent years, proposals have been made for the long-term treatment of radioactive graphite waste which have ranged from sea dumping through incineration to land-based disposal, sometimes preceded by a variable period of 'safe storage' within the original reactor containment. Nuclear regulators are challenging the proposed length of 'safe storage' on the basis that essential knowledge may be lost. More recently, political constraints have further complicated the issue by eliminating disposal at sea and imposing a 'near-zero release' philosophy, while public opinion is opposed to land-based disposal and has induced a continual drive towards minimizing radioactivity release to the environment from disposal. This paper proposes that, despite various international agreements, it is time to review technically all options for disposal of irradiated graphite waste as a framework for the eventual decision-making process. It is recognized that the socio-economic and political pressures are high and therefore, given that all currently identified options satisfy the present safety limits, the need to minimize the objective risk is shown to be a minor need in comparison to the public's want of demonstrable control, responsiveness and ability to reverse/change the disposal options in the future. Further, it is shown that the eventual decision-making process for a post-dismantling option for graphite waste must optimize the beneficial attributes of subjective risk experienced by the general public. In addition, in advocating and preferred option to the general public, it is recommended that the industry should communicate at a level commensurate with the public understanding and initiate a process of facilitation which enables the public to arrive at their own solution and constituting a social exchange. Otherwise it is concluded that if the indecision over disposal options is allowed to continue then, by default, graphite will remain in long-term supervised storage. (author)

Challenging the Future - Journey to Excellence. Aeropropulsion strategic plan for the 1990's

Science.gov (United States)

Over the past several months, the Lewis Aeropropulsion Management Council (AMC) has conducted a critical assessment of its strategic plan. This assessment clearly indicated a need for change, both in the aeropropulsion program emphasis and in the approach to carrying out that program. Customers sent a strong message that the program must improve the timeliness of research and technology products and services and must work more closely with them to develop and transfer new technology. The strategic plan defines AMC's vision for the future and underlying organizational values. It contains a set of broad strategies and actions that point the way toward achieving the goals of customer satisfaction, organizational effectiveness, and programmatic excellence. Those strategies are expected to form the basis for the development of specific tactical plans by Lewis aeropropulsion thrust teams, divisions, and branches. To guide tactical planning of the aeropropulsion program, this strategic plan outlines the agency's strategic directions and long-range aeronautics goals, the aeropropulsion goals and key objectives for achieving them, projections of Lewis aeropropulsion budgets, planned allocations of resources, and the processes that will be used to measure success in carrying out the strategic plan.

Saudi Arabia plans future strategy

International Nuclear Information System (INIS)

Roberts, John.

1996-01-01

The future strategy of Saudi Arabia with respect to its oil production capacity is discussed. A major uncertainty affecting planning is the prospect of an Iraqi return to the market as and when Saddam Hussein falls or he manages to comply fully with all the UN resolutions and sanctions are lifted. It is believed that Iraq could at very short notice be capable of exporting 2mb/d of crude rising to 2.5 mb/d within a few months. This is 10% of OPEC's physically traded crude. Also taken seriously are Baghdad's assertions that Iraq will have a production capacity of about 6mb/d by the year 2000. Saudi officials are concerned that OPEC is not ready to tackle the impact of an Iraqi return to the market at a time when some OPEC members are producing above quota anyway. The most likely outcome is thought to be that OPEC would simply raise their nominal production ceiling. Against this background, Saudi Arabia has embarked on the exploitation of the gigantic oil reserves of the Shaybah field. This development offers the kingdom an ability, on the one hand, to increase its earnings while remaining within its OPEC quota and, on the other hand, to increase output substantially should it ever appear that its best interests are served by not adhering to quotas. (UK)

GIS-Based Planning and Modeling for Renewable Energy: Challenges and Future Research Avenues

Directory of Open Access Journals (Sweden)

Bernd Resch

2014-05-01

Full Text Available In the face of the broad political call for an “energy turnaround”, we are currently witnessing three essential trends with regard to energy infrastructure planning, energy generation and storage: from planned production towards fluctuating production on the basis of renewable energy sources, from centralized generation towards decentralized generation and from expensive energy carriers towards cost-free energy carriers. These changes necessitate considerable modifications of the energy infrastructure. Even though most of these modifications are inherently motivated by geospatial questions and challenges, the integration of energy system models and Geographic Information Systems (GIS is still in its infancy. This paper analyzes the shortcomings of previous approaches in using GIS in renewable energy-related projects, extracts distinct challenges from these previous efforts and, finally, defines a set of core future research avenues for GIS-based energy infrastructure planning with a focus on the use of renewable energy. These future research avenues comprise the availability base data and their “geospatial awareness”, the development of a generic and unified data model, the usage of volunteered geographic information (VGI and crowdsourced data in analysis processes, the integration of 3D building models and 3D data analysis, the incorporation of network topologies into GIS, the harmonization of the heterogeneous views on aggregation issues in the fields of energy and GIS, fine-grained energy demand estimation from freely-available data sources, decentralized storage facility planning, the investigation of GIS-based public participation mechanisms, the transition from purely structural to operational planning, data privacy aspects and, finally, the development of a new dynamic power market design.

The first ep collider run and future plans

International Nuclear Information System (INIS)

Desy, R.B.

1993-01-01

After successful machine commissioning in 1991, the new electron-proton collider HERA was ready to start the experimental program in spring last year. Data taking at the ZEUS and H1 experiments began on June 26. The energy of the colliding beams was E e =26.7 GeV and E p = 820 GeV, in accord with the design. The peak luminosity obtained so far was 2.2x10 29 cm -2 s -1 . Until the end of the experimental run in November 1992 an integrated luminosity of 33 nb -1 was delivered to the experiments. Future plans concerning ep operation focus on increasing the number of colliding bunches in order to approach the design goal for the luminosity of 1.5x10 31 cm -2 s -1 . In the electron ring, up to 60% transverse spin polarization have been achieved. It is planned to install a polarized gas target experiment (Hermes, approved as the 3rd HERA experiment) which will require an electron beam with about 50% longitudinal polarization. The machine modifications required for HERMES are scheduled for the 93/94 winter shut down. Furthermore, the possibilities of installing a fixed target experiment for b-quark physics in the proton ring are being studied

Recent and future PIE activities in KAERI

International Nuclear Information System (INIS)

Ahn, Sangbok; Ryu, Woo-seok; Hong, Kwonpyo; Jeon, Yongbum; Kim, Dosik; Choo, Yongsun

2012-01-01

KAERI has two PIE hot cell facilities. One is Irradiated Material Examination Facility (IMEF) to examine irradiated nuclear fuels and core structural materials at HANARO, and the other is a Post Irradiation Examination Facility (PIEF) to do the operated PWR nuclear fuels and skeleton. Their activities are categorized by hot cell examinations, new technique developments, maintenance of facility utilities and a public acceptance work. In the past three years hot cell tests were executed over 2,000 times related to R and D projects of the future and next generation reactors such as SMART, U-Mo fuels, I-NERI etc., including 30 rods to be operated in domestic PWR's. To supply PIE data on time to the user schedules new equipment and techniques are being developed for 10 items which include an annealing fission gas release rate, thermal diffusivity measurement, a laser puncturing fission gas collection system and mechanical property measurements on PWR FA skeleton etc. For maintenance of facilities the aged utility equipment are refurbished and exchanged for new ones. The partly cracked and leaking building walls are completely repaired, and the aged electric UPS's, HVAC system parts, heating and cooling system are exchanged for new ones. Additionally efforts to upgrade the public acceptance for facility visiting events, open training courses to the university and graduated students have been made. Regarding the future of domestic R and D and a power reactor operating plan the demand for hot cell examinations will be steadily increased. Along with them new PIE techniques on TRISO fuels, minor actinide SFR fuels and CANDU fuels etc are required to be developed. New space to install small scale hot cells, and develop for the extreme conditioned test to meet future demands will be taken. (author)

A planning comparison of 7 irradiation options allowed in RTOG 1005 for early-stage breast cancer

Energy Technology Data Exchange (ETDEWEB)

Chen, Guang-Pei, E-mail: gpchen@mcw.edu [Department of Radiation Oncology, Medical College of Wisconsin, Milwaukee, WI (United States); Liu, Feng [Department of Radiation Oncology, Medical College of Wisconsin, Milwaukee, WI (United States); White, Julia [Department of Radiation Oncology, The Ohio State University, Columbus, OH (United States); Vicini, Frank A. [Michigan Healthcare Professionals/21st Century Oncology, Farmington Hills, MI (United States); Freedman, Gary M. [Department of Radiation Oncology, University of Pennsylvania, Philadelphia, PA (United States); Arthur, Douglas W. [Department of Radiation Oncology, Virginia Commonwealth University, Richmond, VA (United States); Li, X. Allen [Department of Radiation Oncology, Medical College of Wisconsin, Milwaukee, WI (United States)

2015-04-01

This study compared the 7 treatment plan options in achieving the dose-volume criteria required by the Radiation Therapy Oncology Group (RTOG) 1005 protocol. Dosimetry plans were generated for 15 representative patients with early-stage breast cancer (ESBC) based on the protocol-required dose-volume criteria for each of the following 7 treatment options: 3D conformal radiotherapy (3DCRT), whole-breast irradiation (WBI) plus 3DCRT lumpectomy boost, 3DCRT WBI plus electron boost, 3DCRT WBI plus intensity-modulated radiation therapy (IMRT) boost, IMRT WBI plus 3DCRT boost, IMRT WBI plus electron boost, IMRT WBI plus IMRT boost, and simultaneous integrated boost (SIB) with IMRT. A variety of dose-volume parameters, including target dose conformity and uniformity and normal tissue sparing, were compared for these plans. For the patients studied, all plans met the required acceptable dose-volume criteria, with most of them meeting the ideal criteria. When averaged over patients, most dose-volume goals for all plan options can be achieved with a positive gap of at least a few tenths of standard deviations. The plans for all 7 options are generally comparable. The dose-volume goals required by the protocol can in general be easily achieved. IMRT WBI provides better whole-breast dose uniformity than 3DCRT WBI does, but it causes no significant difference for the dose conformity. All plan options are comparable for lumpectomy dose uniformity and conformity. Patient anatomy is always an important factor when whole-breast dose uniformity and conformity and lumpectomy dose conformity are considered.

Strategic Sustainability Performance Plan. Discovering Sustainable Solutions to Power and Secure America’s Future

Energy Technology Data Exchange (ETDEWEB)

None, None

2010-09-01

Sustainability is fundamental to the Department of Energy’s research mission and operations as reflected in the Department’s Strategic Plan. Our overarching mission is to discover the solutions to power and secure America’s future.

Status and future plans of polarized beams at COSY

Science.gov (United States)

Lorentz, B.; Gebel, R.; Lehrach, A.; Maier, R.; Prasuhn, D.; Stockhorst, H.

2011-05-01

In this paper we report on the present status and future plans of polarized beams in the COSY synchrotron ring. COSY is a synchrotron ring in the momentum range from 295 to 3700 MeV/c. Polarized deuterons and protons are routinely delivered to experiments over the whole momentum range. No depolarization occurs during the acceleration of deuterons in COSY. For polarized protons many depolarizing resonances are crossed without polarization loss. At imperfection resonances, vertical steerer magnets are used to increase the resonance strength, leading to a complete polarization reversal. At intrinsic resonances a fast tune jump quadrupole is used to quickly cross the resonances without loss of polarization. Typical proton polarizations are close to 0.8 below 2.1 GeV/c and about 0.6 for higher momenta. During recent operation an induced depolarizing resonance was used for accurate determination of the relative momentum spread dp/p of the stored beam yielding an accuracy of better than 10-4. For spin filter studies of the PAX collaboration a low beta target section was installed in 2009 and was successfully put into operation early 2010. An upgrade of the EDDA polarimeter electronics and data acquisition system is underway to ensure continued availability of the polarimeter, which is essential for the polarized proton operation of COSY. In the near future it is planned to install a Siberian snake solenoid of 4.5 Tm to be able to provide in addition to vertically polarized protons, longitudinal polarization as well. This solenoid will allow the preparation of a longitudinally polarized beam up to a kinetic energy of 500 MeV.

Plan and reports of coupled irradiation (JRR-3 and JOYO of research reactors) and hot facilities work (WASTEF, JMTR-HL, MMF and FMF). R and D project on irradiation damage management technology for structural materials of long-life nuclear plant

International Nuclear Information System (INIS)

Matsui, Yoshinori; Yamamoto, Masaya; Yoshitake, Tsunemitsu; Yoshikawa, Katsunori; Iwamatsu, Shigemi; Ichikawa, Shoichi; Yamagata, Ichiro; Soga, Tomonori; Yonekawa, Minoru; Kitamura, Ryoichi; Miyake, Osamu; Takahashi, Hiroyuki; Ishikawa, Kazuyoshi; Kikuchi, Taiji; Usami, Koji; Endo, Shinya; Ichise, Kenichi; Numata, Masami; Onozawa, Atsushi; Aizawa, Masao; Kusunoki, Tsuyoshi; Nakata, Masahito; Abe, Kazuyuki; Ito, Kazuhiro; Takaya, Shigeru; Nagae, Yuji; Wakai, Eiichi; Aoto, Kazumi

2010-03-01

'R and D Project on Irradiation Damage Management Technology for Structural Materials of Long-life Nuclear Plant' was carried out from FY2006 in a fund of a trust enterprise of the Ministry of Education, Culture, Sports, Science and Technology. The coupled irradiations or single irradiation by JOYO fast reactor and JRR-3 thermal reactor were performed for about two years. The irradiation specimens are very important materials to establish of 'Evaluation of Irradiation Damage Indicator' in this research. For the acquisition of the examination specimens irradiated by the JOYO and JRR-3, we summarized about the overall plan, the work process and the results for the study to utilize these reactors and some facilities of hot laboratory (WASTEF, JMTR-HL, MMF and FMF) of the Oarai Research and Development Center and the Nuclear Science Research Institute in the Japan Atomic Energy Agency. (author)

Mechanical Design and Manufacturing Preparation of Loading Unloading Irradiation Facility in Reflector Irradiation Position

International Nuclear Information System (INIS)

Hasibuan, Djaruddin

2004-01-01

Base on planning to increase of the irradiation service quality in Multi purpose Reactor-GAS, the mechanical design and manufacturing of the (n,γ) irradiation facility has been done. The designed of (n,γ) irradiation facility is a new facility in Multi purpose Reactor-GAS. The design doing by design of stringer, guide bar and hanger. By the design installation, the continuous irradiation service of non fission reaction will be easy to be done without reactor shut down. The design of the facility needs 3 pieces Al pipe by 36 x 1.5 mm, a peace of Al round bar by 80 mm diameter and a piece of Al plate by 20 x 60 x 0.2 mm for the stringer and guide bar manufacturing. By the building of non fission irradiation facility in the reflector irradiation position, will make the irradiation service to be increased. (author)

Motivations and future practice plans of orthodontic residents in Saudi Arabia

Science.gov (United States)

Al-Hamlan, Nasir; Al-Ruwaithi, Moatazbellah M.; Al-Shraim, Nasir; El-Metwaaly, Ashraf

2013-01-01

Aims: This study aims to explore the criteria used by graduate students while selecting a career as orthodontists and their future aspirations. Materials and Methods: A list of Saudi Board of Orthodontics (SB-Ortho) residents was obtained from the Central and Western regions of the Kingdom and all orthodontic residents (excluding the 1st year residents) were invited to participate in this survey. Permission to contact the orthodontic residents was obtained from the respective program directors. The final study sample composed of 36 orthodontic residents. Results: About 39% of residents chose orthodontic specialty after graduation, nearly 33% selected the career during the undergraduate education while the rest chose the specialty at other stages. Approximately, 67% of the residents chose orthodontic specialty because it is intellectual challenging. Around 25% of residents choose orthodontic to improve their earning and 39% join orthodontic for job prestige. Around 50% of orthodontic Saudi residents planned to use self-ligating brackets; 63.9% planned to use invisalign; 86.1% plan to use temporary anchorage devices. About 72% of residents plan to use a cone-beam computerized tomography; 89% plan to use a digital imaging program; 39% plan to use indirect bonding; and 28% plan to use lingual orthodontics. More than half of the residents showed interest to participate in the research and about a quarter of them were willing to work in small cities. Conclusions: Most of the orthodontic residents in Saudi Arabia take up this specialty as they felt that it was intellectually challenging. The SB-Ortho program adequately prepares the residents in all the modern aspects of the specialty. PMID:24987645

The influence of CT control examinations on the irradiation planning for patients with cerebral metastases

International Nuclear Information System (INIS)

Haumann, S.

1986-01-01

The thesis is aimed at reviewing a therapy plan worked out previously for the treatment of patients with cerebral metastases, and at studying computerized tomography for its potential benefit in the planning and implementation of radiotherapy. 61 patients were irradiated and examined neurologically and by CT before, during and after treatment, thus allowing a thorough-going analysis of the findings. CT evaluations differentiated between the change of volume and the number of metastases as well as the change of the extension of perifocal oedema. Our experience shows a dose of 30 Gy related to the centre of the skull to be sufficient, on the one hand, in order to determine by CT whether or not the existing intracerebral tumour metastases of the patient concerned will be accessible by radiotherapy at all, and, on the other hand, to destroy metastases smaller than 5 mm which cannot be detected by CT. (orig./MG) [de

Irradiation doses on thyroid gland during the postoperative irradiation for breast cancer.

Science.gov (United States)

Akın, Mustafa; Ergen, Arzu; Unal, Aysegul; Bese, Nuran

2014-01-01

Thyroid gland is one of the radiosensitive endocrine organs in the body. It has been shown that direct irradiation of thyroid with total doses of 26 to 30 Gy can lead to functional abnormalities. In this study, irradiation doses on thyroid gland of the patients who received postoperative chest-wall/breast and regional nodal irradiation were assessed. Retrospective analyses of treatment plans from 122 breast cancer patients who were treated with 3D conformal radiotherapy (3D CRT) planning was performed. All patients received irradiation to supraclavicular/level III lymph nodes in addition to chest-wall/breast. A total dose of 46 Gy was delivered in 25 days to supraclavicular/level III lymph node region while a total dose of 50 Gy was delivered to whole breast/chest-wall. Thyroid gland was contoured on 2-5 mm thickness of computed tomography scans. Absolute thyroid volume, mean thyroid doses were calculated. The mean thyroid volume of all patients was 16.7 cc (min: 1.9 cc, max: 41.6 cc). The mean irradiation dose on was 22.5 Gy (0.32 Gy-46.5 Gy). The level of dose was higher than 26 Gy in 44% of the patients. In majority of the node-positive breast cancer patients treated with 3D CRT, the thyroid gland was exposed to considerable doses. On the other hand, for 44% of the patients are at risk for developing thyroid function abnormalities which should be considered during the routine follow-up.

Materials irradiation research in neutron science

Energy Technology Data Exchange (ETDEWEB)

Noda, Kenji; Oyama, Yukio [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1997-11-01

Materials irradiation researches are planned in Neutron Science Research Program. A materials irradiation facility has been conceived as one of facilities in the concept of Neutron Science Research Center at JAERI. The neutron irradiation field of the facility is characterized by high flux of spallation neutrons with very wide energy range up to several hundred MeV, good accessibility to the irradiation field, good controllability of irradiation conditions, etc. Extensive use of such a materials irradiation facility is expected for fundamental materials irradiation researches and R and D of nuclear energy systems such as accelerator-driven incineration plant for long-lifetime nuclear waste. In this paper, outline concept of the materials irradiation facility, characteristics of the irradiation field, preliminary technical evaluation of target to generate spallation neutrons, and materials researches expected for Neutron Science Research program are described. (author)

MYRRHA, A Flexible Fast Spectrum Irradiation Facility. Current Status of Design

International Nuclear Information System (INIS)

Baeten, Peter; Fernandez, Rafaël; De Bruyn, Didier; Van den Eynde, Gert; Leysen, Paul; Aït Abderrahim, Hamid; Castelliti, Diego

2011-01-01

R and D program in support of MYRRHA: • Several R&D required for MYRRHA components: - LBE corrosion; - O 2 control in LBE; - Irradiated material properties. • Experimental facilities foreseen in the near future in support of MYRRHA at SCK•CEN premacies: - E-SCAPE: Thermal-hydraulic pool facility with 1:6 scale ratio with MYRRHA; - Liliputter: Pump test loop; - COMPLOT: Isothermal hydraulic loop representing one fuel channel/IPS at full high; - PHX mock-up testing concept, fouling, flow-induced vibrations, (SGTR)…; • Experimental facilities foreseen in the near future in support of MYRRHA at SCK•CEN premacies (continued): - Safety/control rod; - Fuel bundle; - Target window; - Component test pool; - Fuel loader; - Robotic arm; • All experiments planned to be finished before 2016

Irradiation-attenuated anti-parasite vaccines in ruminants. Present status and future prospects

International Nuclear Information System (INIS)

Taylor, M.G.

1981-01-01

The only commercially available irradiated anti-parasite vaccine is Dictol, the anti-Dictyocaulus viviparus vaccine, which is still being widely used in cattle 20 years after its introduction. Several other similar helminth vaccines which showed promise early in their development or use have now been abandoned for reasons both scientific and commercial. Nevertheless, there is still active interest in the development of irradiated vaccines for fascioliasis and schistosomiasis, as recent field trials have shown that irradiated metacercarial and schistosomular vaccines are effective against F. hepatica and S. bovis in cattle. There are no commercially available irradiated vaccines against protozoal diseases. Although experiments showed that irradiated vaccines were effective against Babesia bigemina and Theileria parva in cattle, interest in these has waned as other forms of live vaccines have been introduced. Vaccination against African trypanosomiasis remains an intractable problem, because of the multiplicity of naturally occurring antigenically distinct strains. (author)

Environmental application of cesium-137 irradiation technology: sludges and foods

International Nuclear Information System (INIS)

Sivinski, J.S.

1983-01-01

Several activities have been undertaken to investigate and implement the use of the military byproduct cesium-137 in ways which benefit mankind. Gamma radiation from cesium-137 has been shown to be effective in reducing pathogens in sewage sludge to levels where reuse of the material in public areas meets current regulatory criteria for protection of public health. Food irradiation at doses of 10 kGy or less have been found by international expert committees to be wholesome and safe for human consumption. Cesium-137 can be used as a means of enhancing particular properties of various food commodities by means of sterilization, insect disinfestation, delayed senescence and ripening, and sprout inhibition. This paper discusses the U.S. Department of Energy Beneficial Uses Program research and engineering history, as well as current activities and future plans, relating to both sewage sludge and food irradiation. (author)

Environmental application of cesium-137 irradiation technology: Sludges and foods

Science.gov (United States)

Sivinski, Jacek S.

Several activities have been undertaken to investigate and implement the use of the military byproduct cesium-137 in ways which benefit mankind. Gamma radiation from cesium-137 has been shown to be effective in reducing pathogens in sewage sludge to levels where reuse of the material in public areas meets current regulatory criteria for protection of public health. Food irradiation at doses of 10 kGy or less have been found by international expert committees to be wholesome and safe for human consumption. Cesium-137 can be used as a means of enhancing particular properties of various food commodities by means of sterilization, insect disinfestation, delayed senescence and ripening, and sprout inhibition. This paper discusses the U.S. Department of Energy Beneficial Uses Program research and engineering history, as well as current activities and future plans, relating to both sewage sludge and food irradiation.

Electron accelerator technology research in food irradiation

International Nuclear Information System (INIS)

Jin Jianqiao; Ye Mingyang; Zhang Yue; Yang Bin; Xu Tao; Kong Xiangshan

2014-01-01

Electronic accelerator was applied to instead of cobalt sources for food irradiation, to keep food quality and to improve the effect of the treatment. Appropriate accelerator parameters lead to optimal technique. The irradiation effect is associated with the relationship between uniformity and irradiating speed, the effect of cargo size on radiation penetration, as well as other factors that affect the irradiation effects. Industrialization of electron accelerator irradiation will be looked to the future. (authors)

Educative campaign about information on irradiated foods

International Nuclear Information System (INIS)

Luna C, P.C.

1991-07-01

The irradiation of foods is accepted by international agencies (FAO, OMS) like a healthy and effective technology at the moment the irradiated foods are marketed easily in many countries, however in other countries exist several factors that affect the practical application of this process. In this work is planned about an educational campaign about the irradiation process directed to the consumers. (Author)

Can food irradiation boost nutrition in China?

International Nuclear Information System (INIS)

Wedekind, Lothar

1986-01-01

In January 1986, the first of five regional irradiation facilities planned for China opened officially in Shanghai, mainly to process food. Irradiated potatoes, mushrooms, rice, onions, garlic, peanuts, pork sausage, and probably apples, will be introduced in mass marketing trials. Four other demonstration plants for irradiating food are being built near provincial capitals. Food irradiation offers large economic incentives, but transportation is an impediment except near large urban centres. All irradiators, whether mainly for food or not, will be made in China, with the exception of AECL and Swiss participation in two facilities

Evolution of strategic risks under future scenarios for improved utility master plans.

Science.gov (United States)

Luís, Ana; Lickorish, Fiona; Pollard, Simon

2016-01-01

Integrated, long-term risk management in the water sector is poorly developed. Whilst scenario planning has been applied to singular issues (e.g. climate change), it often misses a link to risk management because the likelihood of impacts in the long-term are frequently unaccounted for in these analyses. Here we apply the morphological approach to scenario development for a case study utility, Empresa Portuguesa das Águas Livres (EPAL). A baseline portfolio of strategic risks threatening the achievement of EPAL's corporate objectives was evolved through the lens of three future scenarios, 'water scarcity', 'financial resource scarcity' and 'strong economic growth', built on drivers such as climate, demographic, economic, regulatory and technological changes and validated through a set of expert workshops. The results represent how the baseline set of risks might develop over a 30 year period, allowing threats and opportunities to be identified and enabling strategies for master plans to be devised. We believe this to be the first combined use of risk and futures methods applied to a portfolio of strategic risks in the water utility sector. Copyright © 2015 Elsevier Ltd. All rights reserved.

Rationalization and future planning for AECL's research reactor capability

International Nuclear Information System (INIS)

Slater, J.B.

1990-01-01

AECL's research reactor capability has played a crucial role in the development of Canada's nuclear program. All essential concepts for the CANDU reactors were developed and tested in the NRX and NRU reactors, and in parallel, important contributions to basic physics were made. The technical feasibility of advanced fuel cycles and of the organic-cooled option for CANDU reactors were also demonstrated in the two reactors and the WR-1 reactor. In addition, an important and growing radio-isotope production industry was established and marketed on a world-wide basis. In 1984, however, it was recognized that a review and rationalization of the research reactor capability was required. The commercial success of the CANDU reactor system had reduced the scope and size of the required development program. Limited research and development funding and competition from other research facilities and programs, required that the scope be reduced to a support basis essential to maintain strategic capability. Currently, AECL, is part-way through this rationalization program and completion should be attained during 1992/93 when the MAPLE reactor is operational and decisions on NRX decommissioning will be made. A companion paper describes some of the unique operational and maintenance problems which have resulted from this program and the solutions which have been developed. Future planning must recognize the age of the NRU reactor (currently 32 years) and the need to plan for eventual replacement. Strategy is being developed and supporting studies include a full technical assessment of the NRU reactor and the required age-related upgrading program, evaluation of the performance characteristics and costs of potential future replacement reactors, particularly the advanced MAPLE concept, and opportunities for international co-operation in developing mutually supportive research programs

Control of stored-product pests by irradiation

International Nuclear Information System (INIS)

Mahbub Hasan; Khan, A.R.

1998-01-01

The present review deals with the effects of irradiation on some aspects of the biology of major stored-product pests, namely mortality, stages of development, reproductive organs and reproductive potential, histology of the gut, factors influencing irradiation and the synergism of irradiation with other control agents. It also reports on the irradiation effects on stored commodities. Further guidelines for future research have been suggested. (author)

Food irradiation: a technology for the eighties

International Nuclear Information System (INIS)

Laizier, J.

1985-09-01

After a brief review of the physical principles of the process of food irradiation and the biological and chemical effects of radiations, data concerning studies about the wholesomeness of irradiated food are presented. The most important fields of potential industrial applications are described. The technology of food irradiators, the economy, present status and future trends of food irradiation are analyzed, with emphasis on the French example

Advanced test reactor testing experience-past, present and future

International Nuclear Information System (INIS)

Marshall, Frances M.

2006-01-01

The Advanced Test Reactor (ATR), at the Idaho National Laboratory (INL), is one of the world's premier test reactors for providing the capability for studying the effects of intense neutron and gamma radiation on reactor materials and fuels. The physical configuration of the ATR, a 4-leaf clover shape, allows the reactor to be operated at different power levels in the corner 'lobes' to allow for different testing conditions for multiple simultaneous experiments. The combination of high flux (maximum thermal neutron fluxes of 1E15 neutrons per square centimeter per second and maximum fast [E>1.0 MeV] neutron fluxes of 5E14 neutrons per square centimeter per second) and large test volumes (up to 122 cm long and 12.7 cm diameter) provide unique testing opportunities. The current experiments in the ATR are for a variety of test sponsors - US government, foreign governments, private researchers, and commercial companies needing neutron irradiation services. There are three basic types of test configurations in the ATR. The simplest configuration is the sealed static capsule, which places the capsule in direct contact with the primary coolant. The next level of experiment complexity is an instrumented lead experiment, which allows for active control of experiment conditions during the irradiation. The most complex experiment is the pressurized water loop, in which the test sample can be subjected to the exact environment of a pressurized water reactor. For future research, some ATR modifications and enhancements are currently planned. This paper provides more details on some of the ATR capabilities, key design features, experiments, and future plans

The future orientation of foresters: An exploratory research among Dutch foresters into the prerequisite for strategic planning in forestry

NARCIS (Netherlands)

Hoogstra, M.A.; Schanz, H.

2008-01-01

The importance of strategic planning as an instrument to cope with the uncertain future has been long recognized, especially in forestry which is characterized by its relationship with the distant future. Surprisingly, the question to what extent the future is indeed considered in forestry

Optimization of rotational radiotherapy treatment planning

International Nuclear Information System (INIS)

Tulovsky, Vladimir; Ringor, Michael; Papiez, Lech

1995-01-01

Purpose: Rotational therapy treatment planning for rotationally symmetric geometry of tumor and healthy tissue provides an important example of testing various approaches to optimizing dose distributions for therapeutic x-ray irradiations. In this article, dose distribution optimization is formulated as a variational problem. This problem is solved analytically and numerically. Methods and Materials: The classical Lagrange method is used to derive equations and inequalities that give necessary conditions for minimizing the mean-square deviation between the ideal dose distribution and the achievable dose distribution. The solution of the resulting integral equation with Cauchy kernel is used to derive analytical formulas for the minimizing irradiation intensity function. Results: The solutions are evaluated numerically and the graphs of the minimizing intensity functions and the corresponding dose distributions are presented. Conclusions: The optimal solutions obtained using the mean-square criterion lead to significant underdosage in some areas of the tumor volume. Possible solutions to this shortcoming are investigated and medically more appropriate criteria for optimization are proposed for future investigations

20 Years of Dukovany NPP Operation and Plans for Future

International Nuclear Information System (INIS)

Vlcek, J.

2006-01-01

NPP Dukovany (4x440MW), the first Czech nuclear power plant and a keystone of Czech Electricity Grid, in 2005 celebrated 20 years of successful operation. In my presentation I am going to speak about next areas. I will start about construction and commissioning history of Dukovany NPP, then I'll put forward what milestones of Dukovany NPP operation were accomplished, I'll say examples about our modernisation and investment activities (including replacement of IandC equipment, modifications for increasing of power and support grid services) and in the end our plans for future. (author)

Irradiation of head-and-neck tumors with intensity modulated radiotherapy (IMRT). Comparison between two IMRT techniques with 3D conformal irradiation

International Nuclear Information System (INIS)

Heeger, Jonas

2013-01-01

For 12 patients with inoperable head-neck carcinoma that were treated with 3D conformal irradiation techniques additional irradiation plans using IMRT were developed. It was shown that the IMRT techniques are superior to the 3D conformal technique. The new rapid arc technique is unclear with respect to the critical organs (parotid glands, spinal canal and mandibles) but is significantly advantageous for the other normal tissue with respect to conformity (steeper dose gradients) and thus radiation dose reduction. The resulting lower irradiation time and the reduced radiation exposure being important for the treatment economy and patients' comfort should favor the more planning intensive rapid arc technique.

Irradiation of UO2

International Nuclear Information System (INIS)

Stevanovic, M.

1965-10-01

Based on the review of the available literature concerned with UO 2 irradiation, this paper describes and explains the phenomena initiated by irradiation of the UO 2 fuel in a reactor dependent on the burnup level and temperature. A comprehensive review of UO 2 radiation damage studies is given as a broad research program. This part includes the abilities of our reactor as well as needed elements for such study. The third part includes the definitions of the specific power, burnup level and temperature in the center of the fuel element needed for planning and performing the irradiation. Methods for calculating these parameters are included [sr

Continuous Arc Rotation of the Couch Therapy for the Delivery of Accelerated Partial Breast Irradiation: A Treatment Planning Analysis

International Nuclear Information System (INIS)

Shaitelman, Simona F.; Kim, Leonard H.; Yan Di; Martinez, Alvaro A.; Vicini, Frank A.; Grills, Inga S.

2011-01-01

Purpose: We present a novel form of arc therapy: continuous arc rotation of the couch (C-ARC) and compare its dosimetry with three-dimensional conformal radiotherapy (3D-CRT), intensity-modulated radiotherapy (IMRT), and volumetric-modulated arc therapy (VMAT) for accelerated partial breast irradiation (APBI). C-ARC, like VMAT, uses a modulated beam aperture and dose rate, but with the couch, not the gantry, rotating. Methods and Materials: Twelve patients previously treated with APBI using 3D-CRT were replanned with (1) C-ARC, (2) IMRT, and (3) VMAT. C-ARC plans were designed with one medial and one lateral arc through which the couch rotated while the gantry was held stationary at a tangent angle. Target dose coverage was normalized to the 3D-CRT plan. Comparative endpoints were dose to normal breast tissue, lungs, and heart and monitor units prescribed. Results: Compared with 3D-CRT, C-ARC, IMRT, and VMAT all significantly reduced the ipsilateral breast V50% by the same amount (mean, 7.8%). Only C-ARC and IMRT plans significantly reduced the contralateral breast maximum dose, the ipsilateral lung V5Gy, and the heart V5%. C-ARC used on average 40%, 30%, and 10% fewer monitor units compared with 3D-CRT, IMRT, and VMAT, respectively. Conclusions: C-ARC provides improved dosimetry and treatment efficiency, which should reduce the risks of toxicity and secondary malignancy. Its tangent geometry avoids irradiation of critical structures that is unavoidable using the en face geometry of VMAT.

Medical RI development plan of KOMAC

Science.gov (United States)

Kim, Kye-Ryung; Jung, Myung-Hwan; Yoon, Sang-Pil; Min, Yi-Sub; Cho, Yong-Sub

2017-12-01

Many kinds of radioisotopes (RIs) produced by the high energy (100 200 MeV) proton accelerators are developed by the foreign R&D institutes and the worldwide demands are being increased continuously. The RI production using high energy proton beam higher than 50 MeV was not considerable because of the limit of the proton beam energy from existing proton accelerator facilities in Korea before 2013. The available maximum proton energy was 50 MeV from MC-50 cyclotron of Korea Institute of Radiological and Medical Sciences (KIRAMS) at that time. After the construction of a 100 MeV high-current and high-energy proton accelerator and a new irradiation facility for the RI production in 2013 and 2016 by the Korea Multi-purpose Accelerator Complex (KOMAC) at Korea Atomic Energy Research Institute (KAERI), we can make a plan for the new RI production of Cu-67, Sr-82 and so on. In the medical application fields, the worldwide demand of Sr-82 is being increased rapidly during last several years and the domestic demand of Cu-67 is also expected to be increased in near future. And alpha-emitters, such as Ac-225 and Ra-223, are becoming attractive to the users in the medical science fields in the future. The RI development plan of KOMAC was specified recently reflecting the recent environment changes and requirements from the users. In this paper, the results and present status of RI production and R&D facilities, calculation results related to the RI production yields, and future plans is presented.

Capital planning for operating theatres based on projecting future theatre requirements.

Science.gov (United States)

Sheehan, Jennifer A; Tyler, Peter; Jayasinha, Hirani; Meleady, Kathleen T; Jones, Neill

2011-05-01

During 2006, NSW and ACT Health Departments jointly engaged KPMG to develop an Operating Theatre Requirements' Projection Model and an accompanying planning guideline. A research scan was carried out to identify drivers of surgical demand, theatre capacity and theatre performance, as well as locating existing approaches to modelling operating theatre requirements for planning purposes. The project delivered a Microsoft Excel-based model for projecting future operating theatre requirements, together with an accompanying guideline for use of the model and interpretation of its outputs. It provides a valuable addition to the suite of tools available to Health staff for service and capital planning. The model operates with several limitations, largely due to being data dependent, and the state and completeness of available theatre activity data. However, the operational flexibility built into the model allows users to compensate for these limitations, on a case by case basis, when the user has access to suitable, local data. The design flexibility of the model means that updating the model as improved data become available is not difficult; resulting in revisions being able to be made quickly, and disseminated to users rapidly.

Past, present and future aspects of studies of heavy ion radiotherapy. 2. Future view of clinical studies of heavy ion radiotherapy

International Nuclear Information System (INIS)

Tsujii, Hirohiko; Kamata, Tadashi

2007-01-01

The purpose of clinical studies of heavy ion radiotherapy (HIR, using carbon beam) in National Institute of Radiological Sciences (NIRS) is, in treatment of cancers, to elucidate its potential and significance for establishing the methodology for curing the disease safely and reliably to further spread the therapy. Here is presented a future view of clinical studies of HIR based on the past results and along authorities' medical policy. NIRS has treated 3,100 or more cancer patients in about 50 clinical trials from the start of HIR in 1994. In those studies, curing the intractable malignancies has become possible in a short term of therapy, and the irradiating machine is being miniaturized (actually under construction in Gunma Univ.). At the end of 2006, about 4,000 patients have been treated with HIR globally: the impact of NIRS HIR. There are such future HIR plans as the promotion of clinical trials, development of irradiation technology, promotion and efficient practice as an advanced frontier medicare, imaging diagnosis for the aim of treatment, biological studies, and comparative studies to elucidate the usefulness. Cooperation of NIRS, manufacturers and authorities will make HIR a more useful, less burdensome mean to treat patients with more intractable cancers. (R.T.)

Vinca irradiator

International Nuclear Information System (INIS)

Eymery, R.

1976-10-01

The development programme of the VINCA radiosterilisation centre involves plans for an irradiator capable of working in several ways. Discontinuous operation. The irradiator is loaded for a certain period then runs automatically until the moment of unloading. This method is suitable as long as the treatment capacity is relatively small. Continuous operation with permanent batch loading and unloading carried out either manually or automatically (by means of equipment to be installed later). Otherwise the design of the apparatus is highly conventional. The source is a vertical panel submersible in a pool. The conveyor is of the 'bucket' type, with 4 tiers to each bucket. The batches pass successively through all possible irradiation positions. Transfert into and out of the cell take place through a maze, which also provides access to the cell when the sources are in storage at the bottom of the pool [fr

SU-F-T-188: A Robust Treatment Planning Technique for Proton Pencil Beam Scanning Cranial Spinal Irradiation

Energy Technology Data Exchange (ETDEWEB)

Zhu, M; Mehta, M; Badiyan, S; Young, K; Malyapa, R; Regine, W; Langen, K [University of Maryland School of Medicine, Baltimore, MD (United States); Yam, M [University of Florida Proton Therapy Institute, Jacksonville, FL (United States)

2016-06-15

Purpose: To propose a proton pencil beam scanning (PBS) cranial spinal irradiation (CSI) treatment planning technique robust against patient roll, isocenter offset and proton range uncertainty. Method: Proton PBS plans were created (Eclipse V11) for three previously treated CSI patients to 36 Gy (1.8 Gy/fractions). The target volume was separated into three regions: brain, upper spine and lower spine. One posterior-anterior (PA) beam was used for each spine region, and two posterior-oblique beams (15° apart from PA direction, denoted as 2PO-15) for the brain region. For comparison, another plan using one PA beam for the brain target (denoted as 1PA) was created. Using the same optimization objectives, 98% CTV was optimized to receive the prescription dose. To evaluate plan robustness against patient roll, the gantry angle was increased by 3° and dose was recalculated without changing the proton spot weights. On the re-calculated plan, doses were then calculated using 12 scenarios that are combinations of isocenter shift (±3mm in X, Y, and Z directions) and proton range variation (±3.5%). The worst-case-scenario (WCS) brain CTV dosimetric metrics were compared to the nominal plan. Results: For both beam arrangements, the brain field(s) and upper-spine field overlap in the T2–T5 region depending on patient anatomy. The maximum monitor unit per spot were 48.7%, 47.2%, and 40.0% higher for 1PA plans than 2PO-15 plans for the three patients. The 2PO-15 plans have better dose conformity. At the same level of CTV coverage, the 2PO-15 plans have lower maximum dose and higher minimum dose to the CTV. The 2PO-15 plans also showed lower WCS maximum dose to CTV, while the WCS minimum dose to CTV were comparable between the two techniques. Conclusion: Our method of using two posterior-oblique beams for brain target provides improved dose conformity and homogeneity, and plan robustness including patient roll.

Canada helps build food irradiation centre

International Nuclear Information System (INIS)

Thomas, R.

1990-01-01

In a project backed by the Canadian International Development Agency, Nordion has built a new food irradiation research and development centre in Thailand, and trained Thai personnel in its operation. Consumer market tests of suitably labelled Thai irradiated foods are planned in Canada, once regulatory approval is obtained. Papayas, mangoes and shrimp are of particular interest

Wholesomeness studies on irradiated foods. Past and future research within the Soviet Union

Energy Technology Data Exchange (ETDEWEB)

Zaytsev, A.N.; Shillinger, Yu.I.; Kamaldinova, Z.M.

1975-11-01

The concept of wholesomeness is based on the absence of induced radioactivity, conservation of the nutritive value of food, and absence of toxicological or mutagenic effects. The possible occurrence of Clostridium botulinum toxin in irradiated fish products is discussed. Evaluation of the nutritive value of irradiated food is discussed with regard to proteins and vitamins. Toxicity and mutagenicity studies are described. Feeding studies on the wholesomeness of irradiated food were conducted in the Soviet Union using potatoes, grain, dried fruits, meat, poultry, and fish. The need for further investigations on the biological value of irradiated foods is pointed out. (HLW)

Consumer acceptance of irradiated food

Energy Technology Data Exchange (ETDEWEB)

Loaharanu, P [Head, Food Preservation Section, Joint FAO/ IAEA Division of Nuclear Techniques in Food and Agriculture, Wagramerstr. 5, A-1400, Vienna (Austria)

1998-12-31

There was a widely held opinion during the 1970`s and 1980`s that consumers would be reluctant to purchase irradiated food, as it was perceived that consumers would confuse irradiated food with food contaminated by radionuclides. Indeed, a number of consumer attitude surveys conducted in several western countries during these two decades demonstrated that the concerns of consumers on irradiated food varied from very concerned to seriously concerned.This paper attempts to review parameters conducting in measuring consumer acceptance of irradiated food during the past three decades and to project the trends on this subject. It is believed that important lessons learned from past studies will guide further efforts to market irradiated food with wide consumer acceptance in the future. (Author)

Consumer acceptance of irradiated food

Energy Technology Data Exchange (ETDEWEB)

Loaharanu, P. [Head, Food Preservation Section, Joint FAO/ IAEA Division of Nuclear Techniques in Food and Agriculture, Wagramerstr. 5, A-1400, Vienna (Austria)

1997-12-31

There was a widely held opinion during the 1970`s and 1980`s that consumers would be reluctant to purchase irradiated food, as it was perceived that consumers would confuse irradiated food with food contaminated by radionuclides. Indeed, a number of consumer attitude surveys conducted in several western countries during these two decades demonstrated that the concerns of consumers on irradiated food varied from very concerned to seriously concerned.This paper attempts to review parameters conducting in measuring consumer acceptance of irradiated food during the past three decades and to project the trends on this subject. It is believed that important lessons learned from past studies will guide further efforts to market irradiated food with wide consumer acceptance in the future. (Author)

Consumer acceptance of irradiated food

International Nuclear Information System (INIS)

Loaharanu, P.

1997-01-01

There was a widely held opinion during the 1970's and 1980's that consumers would be reluctant to purchase irradiated food, as it was perceived that consumers would confuse irradiated food with food contaminated by radionuclides. Indeed, a number of consumer attitude surveys conducted in several western countries during these two decades demonstrated that the concerns of consumers on irradiated food varied from very concerned to seriously concerned.This paper attempts to review parameters conducting in measuring consumer acceptance of irradiated food during the past three decades and to project the trends on this subject. It is believed that important lessons learned from past studies will guide further efforts to market irradiated food with wide consumer acceptance in the future. (Author)

SU-E-T-628: Predicted Risk of Post-Irradiation Cerebral Necrosis in Pediatric Brain Cancer Patients: A Treatment Planning Comparison of Proton Vs. Photon Therapy

Energy Technology Data Exchange (ETDEWEB)

Freund, D [Willis Knighton Cancer Center, Shreveport, LA (United States); Zhang, R; Sanders, M [Mary Bird Perkins Cancer Center, Baton Rouge, LA (United States); Newhauser, W [Louisiana State University, Baton Rouge, LA (United States)

2015-06-15

Purpose: Post-irradiation cerebral necrosis (PICN) is a severe late effect that can Result from brain cancers treatment using radiation therapy. The purpose of this study was to compare the treatment plans and predicted risk of PICN after volumetric modulated arc therapy (VMAT) to the risk after passively scattered proton therapy (PSPT) and intensity modulated proton therapy (IMPT) in a cohort of pediatric patients. Methods: Thirteen pediatric patients with varying age and sex were selected for this study. A clinical treatment volume (CTV) was constructed for 8 glioma patients and 5 ependymoma patients. Prescribed dose was 54 Gy over 30 fractions to the planning volume. Dosimetric endpoints were compared between VMAT and proton plans. The normal tissue complication probability (NTCP) following VMAT and proton therapy planning was also calculated using PICN as the biological endpoint. Sensitivity tests were performed to determine if predicted risk of PICN was sensitive to positional errors, proton range errors and selection of risk models. Results: Both PSPT and IMPT plans resulted in a significant increase in the maximum dose and reduction in the total brain volume irradiated to low doses compared with the VMAT plans. The average ratios of NTCP between PSPT and VMAT were 0.56 and 0.38 for glioma and ependymoma patients respectively and the average ratios of NTCP between IMPT and VMAT were 0.67 and 0.68 for glioma and ependymoma plans respectively. Sensitivity test revealed that predicted ratios of risk were insensitive to range and positional errors but varied with risk model selection. Conclusion: Both PSPT and IMPT plans resulted in a decrease in the predictive risk of necrosis for the pediatric plans studied in this work. Sensitivity analysis upheld the qualitative findings of the risk models used in this study, however more accurate models that take into account dose and volume are needed.

Localized irradiation of mouse legs using an image-guided robotic linear accelerator.

Science.gov (United States)

Kufeld, Markus; Escobar, Helena; Marg, Andreas; Pasemann, Diana; Budach, Volker; Spuler, Simone

2017-04-01

To investigate the potential of human satellite cells in muscle regeneration small animal models are useful to evaluate muscle regeneration. To suppress the inherent regeneration ability of the tibialis muscle of mice before transplantation of human muscle fibers, a localized irradiation of the mouse leg should be conducted. We analyzed the feasibility of an image-guided robotic irradiation procedure, a routine treatment method in radiation oncology, for the focal irradiation of mouse legs. After conducting a planning computed tomography (CT) scan of one mouse in its customized mold a three-dimensional dose plan was calculated using a dedicated planning workstation. 18 Gy have been applied to the right anterior tibial muscle of 4 healthy and 12 mice with immune defect in general anesthesia using an image-guided robotic linear accelerator (LINAC). The mice were fixed in a customized acrylic mold with attached fiducial markers for image guided tracking. All 16 mice could be irradiated as prevised without signs of acute radiation toxicity or anesthesiological side effects. The animals survived until scarification after 8, 21 and 49 days as planned. The procedure was straight forward and the irradiation process took 5 minutes to apply the dose of 18 Gy. Localized irradiation of mice legs using a robotic LINAC could be conducted as planned. It is a feasible procedure without recognizable side effects. Image guidance offers precise dose delivery and preserves adjacent body parts and tissues.

The RaDIATE High-Energy Proton Materials Irradiation Experiment at the Brookhaven Linac Isotope Producer Facility

Energy Technology Data Exchange (ETDEWEB)

Ammigan, Kavin; et al.

2017-05-01

The RaDIATE collaboration (Radiation Damage In Accelerator Target Environments) was founded in 2012 to bring together the high-energy accelerator target and nuclear materials communities to address the challenging issue of radiation damage effects in beam-intercepting materials. Success of current and future high intensity accelerator target facilities requires a fundamental understanding of these effects including measurement of materials property data. Toward this goal, the RaDIATE collaboration organized and carried out a materials irradiation run at the Brookhaven Linac Isotope Producer facility (BLIP). The experiment utilized a 181 MeV proton beam to irradiate several capsules, each containing many candidate material samples for various accelerator components. Materials included various grades/alloys of beryllium, graphite, silicon, iridium, titanium, TZM, CuCrZr, and aluminum. Attainable peak damage from an 8-week irradiation run ranges from 0.03 DPA (Be) to 7 DPA (Ir). Helium production is expected to range from 5 appm/DPA (Ir) to 3,000 appm/DPA (Be). The motivation, experimental parameters, as well as the post-irradiation examination plans of this experiment are described.

Economics of food irradiation

International Nuclear Information System (INIS)

Deitch, J.

1982-01-01

This article examines the cost competitiveness of the food irradiation process. An analysis of the principal factors--the product, physical plant, irradiation source, and financing--that impact on cost is made. Equations are developed and used to calculate the size of the source for planned product throughput, efficiency factors, power requirements, and operating costs of sources, radionuclides, and accelerators. Methods of financing and capital investment are discussed. A series of tables show cost breakdowns of sources, buildings, equipment, and essential support facilities for both a cobalt-60 and a 10-MeV electron accelerator facility. Additional tables present irradiation costs as functions of a number of parameters--power input, source size, dose, and hours of annual operation. The use of the numbers in the tables are explained by examples of calculations of the irradiation costs for disinfestation of grains and radicidation of feed

Development of computerized dose planning system and applicator for high dose rate remote afterloading irradiation

Energy Technology Data Exchange (ETDEWEB)

Choi, T. J. [Keimyung Univ., Taegu (Korea); Kim, S. W. [Fatima Hospital, Taegu (Korea); Kim, O. B.; Lee, H. J.; Won, C. H. [Keimyung Univ., Taegu (Korea); Yoon, S. M. [Dong-a Univ., Pusan (Korea)

2000-04-01

To design and fabricate of the high dose rate source and applicators which are tandem, ovoids and colpostat for OB/Gyn brachytherapy includes the computerized dose planning system. Designed the high dose rate Ir-192 source with nuclide atomic power irradiation and investigated the dose characteristics of fabricated brachysource. We performed the effect of self-absorption and determining the gamma constant and output factor and determined the apparent activity of designed source. he automated computer planning system provided the 2D distribution and 3D includes analysis programs. Created the high dose rate source Ir-192, 10 Ci(370GBq). The effective attenuation factor from the self-absorption and source wall was examined to 0.55 of the activity of bare source and this factor is useful for determination of the apparent activity and gamma constant 4.69 Rcm{sup 2}/mCi-hr. Fabricated the colpostat was investigated the dose distributions of frontal, axial and sagittal plane in intra-cavitary radiation therapy for cervical cancer. The reduce dose at bladder and rectum area was found about 20 % of original dose. The computerized brachytherapy planning system provides the 2-dimensional isodose and 3-D include the dose-volume histogram(DVH) with graphic-user-interface mode. emoted afterloading device was built for experiment of created Ir-192 source with film dosimetry within {+-}1 mm discrepancy. 34 refs., 25 figs., 11 tabs. (Author)

Evaluation of the efficacy of palliative irradiation with high fractionated doses and planned intervals of patients with advanced cancer of the oral cavity and pharynx

International Nuclear Information System (INIS)

Skolyszewski, J.; Reinfuss, M.

1988-01-01

200 patients, previously not treated, with advanced highly differentiated cancer of the oral cavity and pharynx have been palliatively irradiated in the Oncology Center in Cracow in the years 1976-1985. Megavoltage irradiation with fractionated doses 4-5 Gy up to the dose of 20 Gy to the tumor with 4-5 fractions during 4-7 days has been applied. 64 patients received 20 Gy as simple dose, in 65 cases such dose has been repeated after month. 71 patients have been irradiated for the third time with similar dose after another 1 month interval. Partial regression of 25-50% of the tumor volume has been obtained after the first series of irradiation in 19% of patients and more than 50% in 28% of patients, complete regression in 4% of patients. 15,5% of the total number of patients survived 1 year since the initiation of the irradiation, 5% without symptoms of the neoplasm. Worse prognosis is connected with major advancement of the tumor (T 4 , N 2 ), poor general condition, cachexia and alcohol addition. Absence of improvement after the first series of irradiations indicates the non-effectiveness of the treatment. Palliative treatment by irradiation with high fractionated doses and planned interval is a safe and efficacious method. 1 fig., 6 tabs., 14 refs. (author)

Sonographic determination of the irradiated pulmonary volume in case of irradiation of the thoracic wall

International Nuclear Information System (INIS)

Wittich, G.; Hohenberg, G.; Seitz, W.; Vienna Univ.

1983-01-01

In order to determine the irradiated pulmonary volume, comparative examinations by sonography and computed tomography were made in ten patients submitted to postoperative radiotherapy for mammary carcinoma. The physical and anatomical conditions of sonographic volumetry are discussed. In all cases irradiated with tangential contralateral fields, the irradiated pulmonary volume was less than 200 ccm (118 ccm on an average). The sonographic results did not differ essentially from those of computed tomography, so that the sonographic examination can be offered as a simple and sufficient precise method of documentation within the frame of an individual therapy planning. (orig.) [de

Irradiation sequels of retinoblastomas. Sequelles de l'irradiation externe des retinoblastomes

Energy Technology Data Exchange (ETDEWEB)

Benk, V; Habrand, J L; Bloch Michel, E; Soussaline, M; Sarrazin, D [Centre de Lutte Contre le Cancer Gustave-Roussy, 94 - Villejuif (France)

1993-01-01

From 1975 to 1985, 34 children with a non-metastatic retinoblastoma were irradiated at the Institut Gustave-Roussy. After enucleation, 19 bilateral tumors were irradiated by two lateral opposed fields and 15 unilateral tumors by one lateral and anterior field, in the case of optic nerve being histologically positive. Dose was 45 Gy, 1.8 Gy per fraction. The 10-year-survival rate for unilateral and bilateral retinoblastomas was 79%. Long term sequels were available for 25 patients: 88% retained one functional eye. Three children with bilateral retinoblastomas developed a cataract in the residual eye between 2 and 5 years after irradiation, none with unilateral tumor. Nine patients (36%), seven with unilateral and two with bilateral tumor developed a cosmetical problem that required multiple surgical rehabilitation between 3 and 14 years after irradiation. Nine children (36%), five with unilateral and four with bilateral tumors developed growth hormone deficit between 2 and 8 years after irradiation that required hormone replacement. Their pituitary gland received 22 to 40 Gy. No osteosarcoma occurred in this population. Among long-term sequels, following irradiation for retinoblastoma, cosmetical deformities represent disabling sequels that could justify new approaches in radiotherapy, as protontherapy combined with 3-D-treatment planning.

Strategic Plan for the Spanish Academy of Dermatology and Venerology (AEDV): FuturAEDV 2013-2017.

Science.gov (United States)

Ribera Pibernat, M; Moreno Jiménez, J C; Valcuende Cavero, F; Soto de Delás, J; Vázquez Veiga, H; Lázaro Ochaíta, P; Giménez Arnau, A

2014-09-01

The Spanish Academy of Dermatology and Venereology (AEDV) has decided that a Strategic Plan is needed to help the association adapt to new circumstances and anticipate future developments. 1) To position the AEDV as a medical association that can exert an influence in everything related to dermatology. 2) To contribute to the development of the specialty, strengthening the prestige and reputation of dermatology and dermatologists. 3) To establish a model for operating and strategic thinking that can be handed on to successive Boards of Directors and will enable the Academy to identify future challenges. The approach used to develop the Strategic Plan was as follows: analysis of trends in the health care system; assessment of the current situation of AEDV and of dermatology in general through an internal analysis based on surveys and interviews with academics; analysis of strengths, weaknesses, opportunities, and threats; preparation of a mission statement; and identification, development, and implementation of a strategy map prioritizing strategic lines of action. The strategy map set out 16 general goals grouped into 4 main topics (achieving the vision, internal and external customers, internal processes, and innovation) and detailed in an action plan with 19 initiatives, each with specific actions. The plan will be monitored by the Strategic Plan Monitoring Committee, which is made up of the members of the Standing Committee and the chairs of the 9 Technical Committees responsible for implementing the initiatives. The Functional Plan should guide the management of AEDV until 2017, and its implementation will enable the association to contribute to the development and prestige of the specialty and position itself as a reference in terms of its functional model. Copyright © 2014 Elsevier España, S.L.U. y AEDV. All rights reserved.

Irradiation treatment of sewage sludge: History and prospects

International Nuclear Information System (INIS)

Bao Borong; Wu Minghong; Zhou Ruimin; Zhu Jinliang

1998-01-01

This paper first reviews the history of irradiation treatment of sewage sludge in the world. The first sludge irradiation plant was built in Geiselbullach, West Germany in 1973 and used 60 Co as irradiation source. Since then, many sludge irradiators were constructed in U.S.A., India, Japan, Canada, Poland, etc., which used 60 Co, 137 Cs or electron beam as irradiation sources. The paper then describes some basic research on irradiation treatment of sewage sludge including optimization of irradiation parameters, synergistic effect of radiation with heat, oxygenation, irradiation-composting and potential applications of treated sludge. Some proposals have been suggested for further development of this technology in the future

The PHENIX experimental irradiation program

International Nuclear Information System (INIS)

Michel, P.; Courcon, P.; Coulon, P.

1985-03-01

The PHENIX experimental irradiation program represents a substancial volume of work. For example, more than forty experiments were in the core during the 33rd PHENIX irradiation cycle at the end of 1984. This program ensures the implementation, optimization and qualification of new solutions for the future developpment of French LMFBRs in three significant areas: fissile, fertile and absorber elements

Analytical dose modeling for preclinical proton irradiation of millimetric targets.

Science.gov (United States)

Vanstalle, Marie; Constanzo, Julie; Karakaya, Yusuf; Finck, Christian; Rousseau, Marc; Brasse, David

2018-01-01

Due to the considerable development of proton radiotherapy, several proton platforms have emerged to irradiate small animals in order to study the biological effectiveness of proton radiation. A dedicated analytical treatment planning tool was developed in this study to accurately calculate the delivered dose given the specific constraints imposed by the small dimensions of the irradiated areas. The treatment planning system (TPS) developed in this study is based on an analytical formulation of the Bragg peak and uses experimental range values of protons. The method was validated after comparison with experimental data from the literature and then compared to Monte Carlo simulations conducted using Geant4. Three examples of treatment planning, performed with phantoms made of water targets and bone-slab insert, were generated with the analytical formulation and Geant4. Each treatment planning was evaluated using dose-volume histograms and gamma index maps. We demonstrate the value of the analytical function for mouse irradiation, which requires a targeting accuracy of 0.1 mm. Using the appropriate database, the analytical modeling limits the errors caused by misestimating the stopping power. For example, 99% of a 1-mm tumor irradiated with a 24-MeV beam receives the prescribed dose. The analytical dose deviations from the prescribed dose remain within the dose tolerances stated by report 62 of the International Commission on Radiation Units and Measurements for all tested configurations. In addition, the gamma index maps show that the highly constrained targeting accuracy of 0.1 mm for mouse irradiation leads to a significant disagreement between Geant4 and the reference. This simulated treatment planning is nevertheless compatible with a targeting accuracy exceeding 0.2 mm, corresponding to rat and rabbit irradiations. Good dose accuracy for millimetric tumors is achieved with the analytical calculation used in this work. These volume sizes are typical in mouse

77 FR 36406 - Connect America Fund; a National Broadband Plan for Our Future; Establishing Just and Reasonable...

Science.gov (United States)

2012-06-19

... America Fund; a National Broadband Plan for Our Future; Establishing Just and Reasonable Rates for Local Exchange Carriers; High-Cost Universal Service Support; Correction AGENCY: Federal Communications...

Can We Predict Plan Quality for External Beam Partial Breast Irradiation: Results of a Multicenter Feasibility Study (Trans Tasman Radiation Oncology Group Study 06.02)

Energy Technology Data Exchange (ETDEWEB)

Kron, Tomas, E-mail: Tomas.Kron@petermac.org [Peter MacCallum Cancer Centre, Departments of Radiation Oncology, Physical Sciences and Radiation Therapy, Melbourne, Victoria (Australia); Sir Peter MacCallum Department of Oncology, University of Melbourne, Melbourne, Victoria (Australia); School of Science, Engineering and Technology, Royal Melbourne Institute of Technology University, Melbourne, Victoria (Australia); Willis, David; Link, Emma [Peter MacCallum Cancer Centre, Departments of Radiation Oncology, Physical Sciences and Radiation Therapy, Melbourne, Victoria (Australia); Lehman, Margot [Princess Alexandra Hospital, Department of Radiation Oncology, Brisbane, Queensland (Australia); Campbell, Gillian [Auckland City Hospital, Department of Radiation Oncology, Auckland (New Zealand); O' Brien, Peter [Newcastle Calvary Mater Hospital, Department of Radiation Oncology, Newcastle, NSW (Australia); Chua, Boon [Peter MacCallum Cancer Centre, Departments of Radiation Oncology, Physical Sciences and Radiation Therapy, Melbourne, Victoria (Australia); Sir Peter MacCallum Department of Oncology, University of Melbourne, Melbourne, Victoria (Australia)

2013-11-15

Purpose: Partial breast irradiation (PBI) after lumpectomy may be an option for selected patients with early breast cancer. A feasibility study of accelerated PBI delivered using external beam 3-dimensional conformal radiation therapy (RT) was undertaken at 8 Australasian centers. The present study evaluated the impact of patient, tumor, and RT technique-related factors on the quality of RT plans as determined by the dose–volume parameters of organs at risk. Methods and Materials: Forty-eight patients were enrolled in the study. All RT plans were centrally reviewed using predefined dosimetric criteria before commencement and after completion of protocol therapy. The RT plans of 47 patients met the dose–volume constraints, and all 47 patients received PBI to a prescribed dose of 38.5 Gy in 10 fractions. The RT plan quality was determined by volumes of the ipsilateral whole breast, lung, and heart that received 50% and 95%; 30%; and 5% of the prescribed dose, respectively. Patient, tumor, and RT technique-related factors were investigated for association with the parameters of RT plan quality. Results: The ratio of the planning target volume to the ipsilateral whole-breast volume was significantly associated with the ipsilateral breast doses on multiple variable analyses. The distance of the postlumpectomy surgical cavity from the heart and lung were predictive for heart and lung doses, respectively. A distance between surgical cavity and heart of >4 cm typically resulted in <1% of the heart volume receiving 5 Gy or less. It was more difficult to meet the heart dose constraint for left-sided and medially located tumors. Conclusions: Partial breast irradiation using 3-dimensional conformal RT was feasible within the study constraints. The ratio of planning target volume to ipsilateral whole-breast volume and the distance of surgical cavity from the heart were significant predictors of the quality of treatment plan for external beam PBI.

Can We Predict Plan Quality for External Beam Partial Breast Irradiation: Results of a Multicenter Feasibility Study (Trans Tasman Radiation Oncology Group Study 06.02)

International Nuclear Information System (INIS)

Kron, Tomas; Willis, David; Link, Emma; Lehman, Margot; Campbell, Gillian; O'Brien, Peter; Chua, Boon

2013-01-01

Purpose: Partial breast irradiation (PBI) after lumpectomy may be an option for selected patients with early breast cancer. A feasibility study of accelerated PBI delivered using external beam 3-dimensional conformal radiation therapy (RT) was undertaken at 8 Australasian centers. The present study evaluated the impact of patient, tumor, and RT technique-related factors on the quality of RT plans as determined by the dose–volume parameters of organs at risk. Methods and Materials: Forty-eight patients were enrolled in the study. All RT plans were centrally reviewed using predefined dosimetric criteria before commencement and after completion of protocol therapy. The RT plans of 47 patients met the dose–volume constraints, and all 47 patients received PBI to a prescribed dose of 38.5 Gy in 10 fractions. The RT plan quality was determined by volumes of the ipsilateral whole breast, lung, and heart that received 50% and 95%; 30%; and 5% of the prescribed dose, respectively. Patient, tumor, and RT technique-related factors were investigated for association with the parameters of RT plan quality. Results: The ratio of the planning target volume to the ipsilateral whole-breast volume was significantly associated with the ipsilateral breast doses on multiple variable analyses. The distance of the postlumpectomy surgical cavity from the heart and lung were predictive for heart and lung doses, respectively. A distance between surgical cavity and heart of >4 cm typically resulted in <1% of the heart volume receiving 5 Gy or less. It was more difficult to meet the heart dose constraint for left-sided and medially located tumors. Conclusions: Partial breast irradiation using 3-dimensional conformal RT was feasible within the study constraints. The ratio of planning target volume to ipsilateral whole-breast volume and the distance of surgical cavity from the heart were significant predictors of the quality of treatment plan for external beam PBI

1990-1991 Marketing Plan. Year II: Planning To Meet the Future.

Science.gov (United States)

Turcott, Frances; And Others

In Maryland, Catonsville Community College's (CCC) 1990-91 marketing plan deals with the community's perceptions of the institution and strategies to improve CCC's image. Both the 1989-90 and 1990-91 plans targeted the same markets for special recruitment strategies; i.e., high school graduates with transfer plans, part-time adult students,…

Investigation of food irradiation technology for application to plant quarantine. Working group report of food irradiation technology

Energy Technology Data Exchange (ETDEWEB)

Sunaga, Hiromi; Ito, Hitoshi; Takatani, Yasuyuki; Takizawa, Haruki; Yotsumoto, Keiichi; Tanaka, Ryuichi [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment; Hirano, Tsuyoshi; Tokunaga, Okihiro

1999-06-01

The commercialization of food irradiation in Japan was started in 1973 for the sprout inhibition of potatoes as the first successful food irradiation facility in the world. Since approval of potato irradiation, no items has been commercialized in Japan. However, international agreement for phase out of methyl bromide after 2005 and increasing incidences of foodborn diseases such as by Escherichia coli O157:H7 are forcing to have interesting to food irradiation. Takasaki Radiation Chemistry Research Establishment has long experiences on research of irradiation effect and engineering of food irradiation in Japan. From these back ground, working group of food irradiation was organized at August 1997 by some members of Department of Radiation Research for Environment and Resources and Advanced Technology Center for supporting technically on commercialization of food irradiation. This report presents the result of discussion in working group on generalization up to date researches of food irradiation, application fields and items, technical problems and future prospects of this technology in Japan. (author)

Strategic planning for future learning environments: an exploration of interpersonal, interprofessional and political factors.

Science.gov (United States)

Schmidt, Cathrine

2013-09-01

This article, written from the stance of a public planner and a policy maker, explores the challenges and potential in creating future learning environments through the concept of a new learning landscape. It is based on the belief that physical planning can support the strategic goals of universities. In Denmark, a political focus on education as a mean to improve national capacity for innovation and growth are redefining the universities role in society. This is in turn changing the circumstances for the physical planning. Drawing on examples of physical initiatives in three different scales--city, building and room scale, the paper highlights how space and place matters on an interpersonal, an interprofessional and a political level. The article suggests that a wider understanding of how new learning landscapes are created--both as a material reality and a political discourse--can help frame an emerging community of practice. This involves university leaders, faculty and students, architects, designers and urban planners, citizens and policy makers with the common goal of creating future learning environments today.

Economics of gamma irradiation processing

International Nuclear Information System (INIS)

Tani, Toshio

1980-01-01

The gamma-ray irradiation business started at the Takasaki Laboratory of Japan Atomic Energy Research Institute. The irradiation facilities were constructed thereafter at various sites. The facilities must accept various types of irradiation, and must be constructed as multi-purpose facilities. The cost of irradiation consists of the cost of gamma sources, construction expense, personnel expense, management expense, and bank interest. Most of the expenses are considered to be fixed expense, and the amount of irradiation treatment decides the original costs of work. The relation between the irradiation dose and the construction expense shows the larger facility is more economical. The increase of amount of treatment reduces the original cost. The utilization efficiency becomes important when the amount of treatment and the source intensity exceed some values. The principal subjects of gamma-ray irradiation business are the sterilization of medical tools and foods for aseptic animals, the improvement of quality of plastic goods, and the irradiation of foods. Among them, the most important subject is the sterilization of medical tools. The cost of gamma irradiation per m 3 in still more expensive than that by ethylene oxide gas sterilization. However, the demand of gamma-ray irradiation is increasing. For the improvement of quality of plastic goods, electron irradiation is more favourable than the gamma irradiation. In near future, the economical balance of gamma irradiation can be achieved. (Kato, T.)

Digital Story-Based Problem Solving Applications: Preservice Primary Teachers' Experiences and Future Integration Plans

Science.gov (United States)

Kilic, Çigdem; Sancar-Tokmak, Hatice

2017-01-01

This case study investigates how preservice primary school teachers describe their experiences with digital story-based problem solving applications and their plans for the future integration of this technology into their teaching. Totally 113 preservice primary school teachers participated in the study. Data collection tools included a…

Irradiation service, a look at 2000

International Nuclear Information System (INIS)

Espinoza, Juan; Rubio, Tatiana

1999-01-01

Twenty years after the Multipurpose Irradiation Plant (PIM) operation was established, we think that it is about time to briefly review the experiences that have been carried out and to look at future challenges. Having defined the purpose of the PIM as the intermediate stage between laboratory studies and applications and their industrial development, the decision taken about one year ago to join the PIM's business with the irradiation sector is seen as a very positive strategy to strengthen the management capacity for both units and to provide a service with solid technical back-up and a renewed spirit. Over the last year we have been working at various levels simultaneously. Decisions have been made to integrate all the employees working in the PIM into a work team. A first diagnosis showed that if there were a group of employees with a good level of experience their activity should be consolidated into a team. An in-house training session was held for the irradiation section and the training Manual for irradiation plan operators, published by the International Food Irradiation Consultative Group (IFICG), is being studied and applied. With the support of the Information Unit a storage and operation control system is being developed using a bar code, which will improve the information about productive and administrative aspects as well as obtain better production statistics than what were previously available. A computer record of the Operation Logbook will automatically generate information about shifts, efficiency indicators for the plant and the operation, detention times, etc. The main quality control for the irradiation processes is the dosimetric control and the corresponding certification. The client base has expanded with validations of their product processes and the service provided is being certified, to become part of the food certification program. The advances made in the certification of our products has given our clients a better perception of our

High precision bladder cancer irradiation by integrating a library planning procedure of 6 prospectively generated SIB IMRT plans with image guidance using lipiodol markers

International Nuclear Information System (INIS)

Meijer, Gert Johan; Toorn, Peter-Paul van der; Bal, Matthieu; Schuring, Danny; Weterings, Jan; Wildt, Michel de

2012-01-01

Purpose: To increase local control and decrease side effects for urinary bladder cancer patients by integrating a library planning procedure with image guidance using lipiodol markers. Methods and materials: Twenty patients with T2-T4N0M0 grade 2–3 invasive bladder carcinoma were treated according to an online adaptive protocol. Initially, the gross tumour volume (GTV) was demarcated during cystoscopy by injecting several drops of lipiodol in the submucosa around the tumour. Subsequently two CT scans were acquired with a full bladder and a voided bladder. On both scans, the boost volume (GTV) and the low-risk bladder volume were delineated. Using an interpolation tool, six concomitant boost IMRT plans with increasing bladder volumes were generated. For each fraction the procedure at the treatment unit was as follows: Firstly, a ConeBeam-CT was acquired and based on the amount of bladder filling the best fitting bladder contours and corresponding GTV and IMRT plans were selected. Secondly, the lipiodol markers were registered using the corresponding GTV contours and it was verified that the corresponding 95%-isodose surface covered the entire bladder. Finally, an online setup correction was applied based on this registration and the corresponding treatment plan was irradiated. Results: The lipiodol markers were very useful in outlining the GTV at the planning CT and for daily setup correction. While the patients strived for a full bladder filling at time of the treatment, this was seldom accomplished. Due to our protocol an appropriate plan with adequate coverage of the PTV and without excessive dose to healthy tissue was delivered every day. The treatment was very well tolerated by all patients. At the end of the treatment no grade 3 urinary or gastro-intestinal toxicity was observed. After a median follow-up of 28 months two local relapses occurred. Conclusion: Using the library planning approach combined with online image guidance using lipiodol markers, we

High precision bladder cancer irradiation by integrating a library planning procedure of 6 prospectively generated SIB IMRT plans with image guidance using lipiodol markers.

Science.gov (United States)

Meijer, Gert Johan; van der Toorn, Peter-Paul; Bal, Matthieu; Schuring, Danny; Weterings, Jan; de Wildt, Michel

2012-11-01

To increase local control and decrease side effects for urinary bladder cancer patients by integrating a library planning procedure with image guidance using lipiodol markers. Twenty patients with T2-T4N0M0 grade 2-3 invasive bladder carcinoma were treated according to an online adaptive protocol. Initially, the gross tumour volume (GTV) was demarcated during cystoscopy by injecting several drops of lipiodol in the submucosa around the tumour. Subsequently two CT scans were acquired with a full bladder and a voided bladder. On both scans, the boost volume (GTV) and the low-risk bladder volume were delineated. Using an interpolation tool, six concomitant boost IMRT plans with increasing bladder volumes were generated. For each fraction the procedure at the treatment unit was as follows: Firstly, a ConeBeam-CT was acquired and based on the amount of bladder filling the best fitting bladder contours and corresponding GTV and IMRT plans were selected. Secondly, the lipiodol markers were registered using the corresponding GTV contours and it was verified that the corresponding 95%-isodose surface covered the entire bladder. Finally, an online setup correction was applied based on this registration and the corresponding treatment plan was irradiated. The lipiodol markers were very useful in outlining the GTV at the planning CT and for daily setup correction. While the patients strived for a full bladder filling at time of the treatment, this was seldom accomplished. Due to our protocol an appropriate plan with adequate coverage of the PTV and without excessive dose to healthy tissue was delivered every day. The treatment was very well tolerated by all patients. At the end of the treatment no grade 3 urinary or gastro-intestinal toxicity was observed. After a median follow-up of 28 months two local relapses occurred. Using the library planning approach combined with online image guidance using lipiodol markers, we were able to deliver a highly conformal dose distribution

Software to support planning for future waste treatment, storage, transport, and disposal requirements

International Nuclear Information System (INIS)

Holter, G.M.; Shay, M.R.; Stiles, D.L.

1990-04-01

Planning for adequate and appropriate treatment, storage, transport and disposal of wastes to be generated or received in the future is a complex but critical task that can be significantly enhanced by the development and use of appropriate software. This paper describes a software system that has been developed at Pacific Northwest Laboratory to aid in such planning. The basic needs for such a system are outlined, and the approach adopted in developing the software is described. The individual components of the system, and their integration into a unified system, are discussed. Typical analytical applications of this type of software are summarized. Conclusions concerning the development of such software systems and the necessary supporting data are then presented. 2 figs

Systematic Reviews of Mechanisms for Financing Family Planning: Findings, Implications, and Future Agenda.

Science.gov (United States)

Lissner, Craig L; Ali, Moazzam

2016-12-01

The article describes an international collaboration that systematically reviewed the evidence on financing mechanisms for family planning/contraception, assessed the strength of and summarized the evidence, identified research gaps, and proposed a new research agenda to address the gaps. The review found that the evidence base is weak owing to the paucity of studies, diversity in findings, and variations in intervention, study design, and outcome measures. Of more than 17,000 papers reviewed only 38 met the eligibility criteria. A number of general recommendations on the directions and areas of future research can be drawn. There is a strong need for more robust study designs on the effectiveness of financial incentives in family planning. © 2016 The Population Council, Inc.

Program plan for future regulatory activity in nuclear-power-plant maintenance

International Nuclear Information System (INIS)

Badalamente, R.V.

1982-10-01

The intent of this paper is to describe the results of a study of nuclear power plant (NPP) maintenance conducted by Battelle's Pacific Northwest Laboratories (PNL) for the Nuclear Regulatory Commission (NRC). The purpose of the study for the NRC was to determine problems affecting human performance in NPP maintenance, pinpoint those which adversely affect public health and safety, review strategies for overcoming the problems, and suggest the direction that regulatory activities should take. Results of the study were presented to the NRC (Division of Human Factors Safety) in the form of a recommended program plan for future regulatory activity in NPP maintenance

SU-F-T-446: Improving Craniospinal Irradiation Technique Using Volumetric Modulated Arc Therapy (VMAT) Planning and Its Dosimetric Verification

Energy Technology Data Exchange (ETDEWEB)

Yang, X; Tejani, M; Jiang, X; Elder, E; Dhabaan, A [Emory University, Atlanta, GA (United States)

2016-06-15

Purpose: The purpose of this study is to investigate a volumetric modulated arc therapy (VMAT) treatment planning technique for supine craniospinal irradiation (CSI). Evaluate the suitability of VMAT for CSI with dosimetric measurements and compare it to 3D conformal planning using specific plan metrics such as dose conformity, homogeneity, and dose of organs at risk (OAR). Methods: Ten CSI patients treated with conventional 3D technique were re-planned with VMAT. The PTV was contoured to include the whole contents of the brain and spinal canal with a uniform margin of 5 mm. VMAT plans were generated with two partial arcs covering the brain, two partial arcs for the superior portion of the spinal cord and two partial arcs covering the remaining inferior portion of the spinal cord. Conformity index (CI), heterogeneity indexes (HI) and max and mean doses of OAR were compared to 3D plans. VMAT plans were delivered onto an anthropomorphic phantom loaded with Gafchromic films and OSLDs placed at specific positions to evaluate the plan dose at the junctions and as well as the plan dose distributions. Results: This VMAT technique was validated with a clinical study of 10 patients. The average CI was 1.03±0.02 for VMAT plans and 1.96±0.32 for conformal plans. And the average HI was 1.15±0.01 for VMAT plans and 1.51±0.21 for conformal plans. The mean and max doses to the all OARs for VMAT plans were significantly lower than conformal plans. The measured dose in phantom for VAMT plans was comparable to the calculated dose in Eclipse and the doses at junctions were verified. Conclusion: VMAT CSI was able to achieve better dose conformity and heterogeneity as well as significantly reducing the dose to Heart, esophagus and larynx. VMAT CSI appears to be a dosimterically advantageous, faster delivery, has better reproducibility CSI treatment.

810 Future plans

International Nuclear Information System (INIS)

Etkin, A.; Foley, K.J.; Hackenburg, R.W.; Longacre, R.S.; Love, W.A.; Morris, T.W.; Platner, E.D.; Saulys, A.C.; Lindenbaum, S.J.; Chan, C.S.; Kramer, M.A.; Hallman, T.J.; Madansky, L.; Bonner, B.E.; Buchanan, J.A.; Chiou, C.N.; Clement, J.M.; Corcoran, M.D.; Kruk, J.W.; Miettinen, H.E.; Mutchler, G.S.; Nessi-Tedaldi, F.; Nessi, M.; Roberts, J.B.

1990-01-01

It is believed that a good bet for finding the Quark-Gluon Plasma at AGS energies is with the heaviest projectiles on the heaviest target, i.e. Au on Au. One of the likely signatures of the plasma is strangeness enhancement. Al Saulys has shown what it's like to find Δ and K degree with Si projectiles. Our Monte Carlo simulations show track densities 4 times higher for Au projectiles. In addition, the Au beam itself produces 30 times more ionization. Thus the present TPC's will be limited to only a few hundred ions per sec. This paper discusses plans for these experiments and modification to TPC. 9 figs

Irradiation test plan of instrumented capsule(05F-01K) for nuclear fuel irradiation in Hanaro (Revision 1)

Energy Technology Data Exchange (ETDEWEB)

Sohn, Jae Min; Kim, B. G.; Choi, M. H. (and others)

2006-09-15

An instrumented capsule was developed to be able to measure fuel characteristics, such as fuel temperature, internal pressure of fuel rod, fuel pellet elongation, and neutron flux, etc., during the irradiation test of nuclear fuel in HANARO. The instrumented capsule for measuring and monitoring fuel centerline temperature and neutron flux was designed and manufactured. And then, to verify the design of the instrumented capsule in the test hole, it was successfully irradiated in the test hole of HANARO from March 14, 2003 to June 1, 2003 (53.84 full power days at 24 MW). In the year of 2004, 3 test fuel rods and the 03F-05K instrumented fuel capsule were designed and fabricated to measure fuel centerline temperature, internal pressure of fuel rod, and fuel axial deformation during irradiation test. Now, this capsule was successfully irradiated in the test hole OR5 of HANARO reactor from April 27, 2004 to October 1, 2004 (59.5 full power days at 24-30 MW). The capsule and fuel rods have been be dismantled and fuel rods have been examined at the hot cell of IMEF. The instrumented fuel capsule (05F-01K) was designed and manufactured for a design verification test of the dual instrumented fuel rods. The irradiation test of the 05F-01K instrumented fuel capsule will be carried out at the OR5 vertical experimental hole of HANARO.

Status of irradiation technology development in JMTR

International Nuclear Information System (INIS)

Inaba, Y.; Inoue, S.; Izumo, H.; Kitagishi, S.; Tsuchiya, K.; Saito, T.; Ishitsuka, E.

2008-01-01

Irradiation Engineering Section of the Neutron Irradiation and Testing Reactor Centre was organised to development the new irradiation technology for the application at JMTR re-operation. The new irradiation engineering building was remoulded from the old RI development building, and was started to use from the end of September, 2008. Advanced in-situ instrumentation technology(high temperature multi-paired thermocouple, ceramic sensor,application of optical measurement), 99 Mo production technology by new Mo solution irradiation method,recycling technology on used beryllium reflector, and so on are planned as the development of new irradiation technologies. The development will be also important for the education and training programs through the development of young generation in not only Japan but also Asian countries. In this report, as the status of the development the new irradiation technology, new irradiation engineering building, high temperature multi-paired thermocouple, experiences of optical measurement, recycling technology on used beryllium reflector are introduced

Status of Irradiation technology development in JMTR

International Nuclear Information System (INIS)

Inaba, Y.; Inoue, S.; Izumo, H.; Kitagishi, S.; Tsuchiya, K.; Saito, T.; Ishitsuka, E.

2008-01-01

Irradiation Engineering Section of the Neutron Irradiation and Testing Reactor Center was organized to development the new irradiation technology for the application at JMTR re operation. The new irradiation engineering building was remodeled from the old RI development building, and was started to use from the end of September, 2008. Advanced in situ instrumentation technology (high temperature multi paired thermocouple, ceramic sensor, application of optical measurement), 99M o production technology by new Mo solution irradiation method, recycling technology on used beryllium reflector, and so on are planned as the development of new irradiation technologies. The development will be also important for the education and training programs through the development of young generation in not only Japan but also Asian counties. In this report, as the status of the development the new irradiation technology, new irradiation engineering building, high temperature multi paired thermocouple, experiences of optical measurement, recycling technology on used beryllium reflector are introduced

Irradiation behaviors of coated fuel particles, (3)

International Nuclear Information System (INIS)

Fukuda, Kousaku; Kashimura, Satoru; Iwamoto, Kazumi; Ikawa, Katsuichi

1980-07-01

This report is concerning to the irradiation experiments of the coated fuel particles, which were performed by 72F-6A and 72F-7A capsules in JMTR. The coated particles referred to the preliminary design of VHTR were prepared for the experiments in 1972 and 1973. 72F-6A capsule was irradiated at G-10 hole of JMTR fuel zone for 2 reactor cycles, and 72F-7A capsule had been planned to be irradiated at the same irradiation hole before 72F-6A. However, due to slight leak of the gaseous fission products into the vacuum system controlling irradiation temperature, irradiation of 72F-7A capsule was ceased after 85 hrs since the beginning. In the post irradiation examination, inspection to surface appearance, ceramography, X-ray microradiography and acid leaching for the irradiated particle samples were made, and crushing strength of the two particle samples was measured. (author)

Using genetic algorithms to optimise current and future health planning - the example of ambulance locations

Directory of Open Access Journals (Sweden)

Suzuki Hiroshi

2010-01-01

Full Text Available Abstract Background Ambulance response time is a crucial factor in patient survival. The number of emergency cases (EMS cases requiring an ambulance is increasing due to changes in population demographics. This is decreasing ambulance response times to the emergency scene. This paper predicts EMS cases for 5-year intervals from 2020, to 2050 by correlating current EMS cases with demographic factors at the level of the census area and predicted population changes. It then applies a modified grouping genetic algorithm to compare current and future optimal locations and numbers of ambulances. Sets of potential locations were evaluated in terms of the (current and predicted EMS case distances to those locations. Results Future EMS demands were predicted to increase by 2030 using the model (R2 = 0.71. The optimal locations of ambulances based on future EMS cases were compared with current locations and with optimal locations modelled on current EMS case data. Optimising the location of ambulance stations locations reduced the average response times by 57 seconds. Current and predicted future EMS demand at modelled locations were calculated and compared. Conclusions The reallocation of ambulances to optimal locations improved response times and could contribute to higher survival rates from life-threatening medical events. Modelling EMS case 'demand' over census areas allows the data to be correlated to population characteristics and optimal 'supply' locations to be identified. Comparing current and future optimal scenarios allows more nuanced planning decisions to be made. This is a generic methodology that could be used to provide evidence in support of public health planning and decision making.

Mechanical properties of irradiated beryllium

International Nuclear Information System (INIS)

Beeston, J.M.; Longhurst, G.R.; Wallace, R.S.

1992-01-01

Beryllium is planned for use as a neutron multiplier in the tritium breeding blanket of the International Thermonuclear Experimental Reactor (ITER). After fabricating samples of beryllium at densities varying from 80 to 100% of the theoretical density, we conducted a series of experiments to measure the effect of neutron irradiation on mechanical properties, especially strength and ductility. Samples were irradiated in the Advanced Test Reactor (ATR) to a neutron fluence of 2.6 x 10 25 n/m 2 (E > MeV) at an irradiation temperature of 75deg C. These samples were subsequently compression-tested at room temperature, and the results were compared with similar tests on unirradiated specimens. We found that the irradiation increased the strength by approximately four times and reduced the ductility to approximately one fourth. Failure was generally ductile, but the 80% dense irradiated samples failed in brittle fracture with significant generation of fine particles and release of small quantities of tritium. (orig.)

Mechanical properties of irradiated beryllium

Energy Technology Data Exchange (ETDEWEB)

Beeston, J.M.; Longhurst, G.R.; Wallace, R.S. (EG and G Idaho, Inc., Idaho Falls, ID (United States). Idaho National Engineering Lab.); Abeln, S.P. (EG and G Rocky Flats, Inc., Golden, CO (United States))

1992-10-01

Beryllium is planned for use as a neutron multiplier in the tritium breeding blanket of the International Thermonuclear Experimental Reactor (ITER). After fabricating samples of beryllium at densities varying from 80 to 100% of the theoretical density, we conducted a series of experiments to measure the effect of neutron irradiation on mechanical properties, especially strength and ductility. Samples were irradiated in the Advanced Test Reactor (ATR) to a neutron fluence of 2.6 x 10[sup 25] n/m[sup 2] (E > MeV) at an irradiation temperature of 75deg C. These samples were subsequently compression-tested at room temperature, and the results were compared with similar tests on unirradiated specimens. We found that the irradiation increased the strength by approximately four times and reduced the ductility to approximately one fourth. Failure was generally ductile, but the 80% dense irradiated samples failed in brittle fracture with significant generation of fine particles and release of small quantities of tritium. (orig.).

Mechanical properties of irradiated beryllium

Science.gov (United States)

Beeston, J. M.; Longhurst, G. R.; Wallace, R. S.; Abeln, S. P.

1992-10-01

Beryllium is planned for use as a neutron multiplier in the tritium breeding blanket of the International Thermonuclear Experimental Reactor (ITER). After fabricating samples of beryllium at densities varying from 80 to 100% of the theoretical density, we conducted a series of experiments to measure the effect of neutron irradiation on mechanical properties, especially strength and ductility. Samples were irradiated in the Advanced Test Reactor (ATR) to a neutron fluence of 2.6 × 10 25 n/m 2 ( E > 1 MeV) at an irradiation temperature of 75°C. These samples were subsequently compression-tested at room temperature, and the results were compared with similar tests on unirradiated specimens. We found that the irradiation increased the strength by approximately four times and reduced the ductility to approximately one fourth. Failure was generally ductile, but the 80% dense irradiated samples failed in brittle fracture with significant generation of fine particles and release of small quantities of tritium.

Advance of investigation of irradiation embrittlement mechanism of nuclear reactor pressure vessel steels. History and future of irradiation embrittlement researches

International Nuclear Information System (INIS)

Ishino, Shiori

2007-01-01

The nuclear reactor pressure vessel is the most important component of LWR plants required to be safe. This paper describes contents of the title consisting of four chapters. The first chapter states the general theory of irradiation effects, irradiation embrittlement and decreasing of toughness, and some kinds of pressure vessel steels. The second chapter explains history of irradiation embrittlement investigations and the advance of research methods for experiments and calculation. The third chapter contains information of inner structure of irradiated materials and development of prediction equations, recent information of embrittlement mechanism and mechanism guided prediction method, USA model and Central Research Institute of Electric Power Industry (CRIEPI) model. The fourth chapter states recent problems from viewpoints of experimental and analytical approaches. Comparison of standards of LWR pressure vessel steels between Japan and USA, relation between the density of number of cluster and the copper content, effect of flux on clustering of copper atoms, and CRIEPI's way of approaching the prediction method are illustrated. (S.Y.)

Tsunami evacuation plans for future megathrust earthquakes in Padang, Indonesia, considering stochastic earthquake scenarios

Directory of Open Access Journals (Sweden)

A. Muhammad

2017-12-01

Full Text Available This study develops tsunami evacuation plans in Padang, Indonesia, using a stochastic tsunami simulation method. The stochastic results are based on multiple earthquake scenarios for different magnitudes (Mw 8.5, 8.75, and 9.0 that reflect asperity characteristics of the 1797 historical event in the same region. The generation of the earthquake scenarios involves probabilistic models of earthquake source parameters and stochastic synthesis of earthquake slip distributions. In total, 300 source models are generated to produce comprehensive tsunami evacuation plans in Padang. The tsunami hazard assessment results show that Padang may face significant tsunamis causing the maximum tsunami inundation height and depth of 15 and 10 m, respectively. A comprehensive tsunami evacuation plan – including horizontal evacuation area maps, assessment of temporary shelters considering the impact due to ground shaking and tsunami, and integrated horizontal–vertical evacuation time maps – has been developed based on the stochastic tsunami simulation results. The developed evacuation plans highlight that comprehensive mitigation policies can be produced from the stochastic tsunami simulation for future tsunamigenic events.

Phytosanitary irradiation - Development and application

Science.gov (United States)

Hallman, Guy J.; Loaharanu, Paisan

2016-12-01

Phytosanitary irradiation, the use of ionizing radiation to disinfest traded agricultural commodities of regulated pests, is a growing use of food irradiation that has great continued potential for increase in commercial application. In 2015 approximately 25,000 t of fresh fruits and vegetables were irradiated globally for phytosanitary purposes. Phytosanitary irradiation has resulted in a paradigm shift in phytosanitation in that the final burden of proof of efficacy of the treatment has shifted from no live pests upon inspection at a port of entry (as for all previous phytosanitary treatments) to total dependence on certification that the treatment for target pests is based on adequate science and is commercially conducted and protected from post-treatment infestation. In this regard phytosanitary irradiation is managed more like a hazard analysis and critical control point (HACCP) approach more consistent with food safety than phytosanitation. Thus, phytosanitary irradiation offers a more complete and rigorous methodology for safeguarding than other phytosanitary measures. The role of different organizations in achieving commercial application of phytosanitary irradiation is discussed as well as future issues and applications, including new generic doses.

Current and future plans for wind energy development on San Clemente Island, California

Energy Technology Data Exchange (ETDEWEB)

Hurley, P.J.F. [RLA Consulting, Inc., Bothell, WA (United States); Cable, S.B. [Naval Facilities Engineering Service Center, Port Hueneme, CA (United States)

1996-12-31

The Navy is considering possible ways to maximize the use of wind energy technology for power supply to their auxiliary landing field and other facilities on San Clemente Island. A summary of their past analysis and future considerations is presented. An analysis was performed regarding the technical and economic feasibility of installing and operating a sea-water pumped hydro/wind energy system to provide for all of the island`s electric power needs. Follow-on work to the feasibility study include wind resource monitoring as well as procurement and preliminary design activities for a first-phase wind-diesel installation. Future plans include the consideration of alternative siting arrangements and the introduction of on-island fresh water production. 3 refs., 4 figs.

Does Three-Dimensional External Beam Partial Breast Irradiation Spare Lung Tissue Compared With Standard Whole Breast Irradiation?

International Nuclear Information System (INIS)

Jain, Anudh K.; Vallow, Laura A.; Gale, Ashley A.; Buskirk, Steven J.

2009-01-01

Purpose: To determine whether three-dimensional conformal partial breast irradiation (3D-PBI) spares lung tissue compared with whole breast irradiation (WBI) and to include the biologically equivalent dose (BED) to account for differences in fractionation. Methods and Materials: Radiotherapy treatment plans were devised for WBI and 3D-PBI for 25 consecutive patients randomized on the NSABP B-39/RTOG 0413 protocol at Mayo Clinic in Jacksonville, Florida. WBI plans were for 50 Gy in 25 fractions, and 3D-PBI plans were for 38.5 Gy in 10 fractions. Volume of ipsilateral lung receiving 2.5, 5, 10, and 20 Gy was recorded for each plan. The linear quadratic equation was used to calculate the corresponding dose delivered in 10 fractions and volume of ipsilateral lung receiving these doses was recorded for PBI plans. Ipsilateral mean lung dose was recorded for each plan and converted to BED. Results: There was a significant decrease in volume of lung receiving 20 Gy with PBI (median, 4.4% vs. 7.5%; p 3 vs 4.85 Gy 3 , p = 0.07). PBI plans exposed more lung to 2.5 and 5 Gy. Conclusions: 3D-PBI exposes greater volumes of lung tissue to low doses of radiation and spares the amount of lung receiving higher doses when compared with WBI.

Irradiation dose of cosmonauts

International Nuclear Information System (INIS)

Makra, Zs.

1978-01-01

The results obtained by determining the irradiation dose during the spaceflights of Apollo as well as the Sojouz-3 and Sojouz-9 spacecrafts have been compared in the form of tables. In case of Apollo astronauts the irradiation dose was determined by two methods and its sources were also pointed out, in tables. During Sojouz spacetravels the cosmonauts were exposed to a negligible dose. In spite of this fact the radiation danger is considerable. The small irradiation doses noticed so far are due to the fact that during the spaceflights there was no big proturberance. However, during the future long-range spacetravels a better radiation shielding than the one used up to now will be necessary. (P.J.)

Planning protected areas network that are relevant today and under future climate change is possible: the case of Atlantic Forest endemic birds

Directory of Open Access Journals (Sweden)

Mariana M. Vale

2018-05-01

Full Text Available Background A key strategy in biodiversity conservation is the establishment of protected areas. In the future, however, the redistribution of species in response to ongoing climate change is likely to affect species’ representativeness in those areas. Here we quantify the effectiveness of planning protected areas network to represent 151 birds endemic to the Brazilian Atlantic Forest hotspot, under current and future climate change conditions for 2050. Methods We combined environmental niche modeling and systematic conservation planning using both a county and a regional level planning strategy. We recognized the conflict between biodiversity conservation and economic development, including socio-economic targets (as opposed to biological only and using planning units that are meaningful for policy-makers. Results We estimated an average contraction of 29,500 km2 in environmentally suitable areas for birds, representing 52% of currently suitable areas. Still, the most cost-effective solution represented almost all target species, requiring only ca. 10% of the Atlantic Forest counties to achieve that representativeness, independent of strategy. More than 50% of these counties were selected both in the current and future planned networks, representing >83% of the species. Discussion Our results indicate that: (i planning protected areas network currently can be useful to represent species under climate change; (ii the overlapped planning units in the best solution for both current and future conditions can be considered as “no regret” areas; (iii priority counties are spread throughout the biome, providing specific guidance wherever the possibility of creating protected area arises; and (iv decisions can occur at different administrative spheres (Federal, State or County as we found quite similar numerical solutions using either county or regional level strategies.

Medical oncology future plan of the Spanish Society of Medical Oncology: challenges and future needs of the Spanish oncologists.

Science.gov (United States)

Rivera, F; Andres, R; Felip, E; Garcia-Campelo, R; Lianes, P; Llombart, A; Piera, J M; Puente, J; Rodriguez, C A; Vera, R; Virizuela, J A; Martin, M; Garrido, P

2017-04-01

The SEOM Future Plan is aimed at identifying the main challenges, trends and needs of the medical oncology speciality over the next years, including potential oncologist workforce shortages, and proposing recommendations to overcome them. The estimations of the required medical oncologists workforce are based on an updated Medical Oncologist Register in Spain, Medical Oncology Departments activity data, dedication times and projected cancer incidence. Challenges, needs and future recommendations were drawn from an opinion survey and an advisory board. A shortage of 211 FTE medical oncologist specialists has been established. To maintain an optimal ratio of 158 new cases/FTE, medical oncology workforce should reach 1881 FTE by 2035. Main recommendations to face the growing demand and complexity of oncology services include a yearly growth of 2.5% of medical oncologist's workforce until 2035, and development and application of more accurate quality indicators for cancer care and health outcomes measure.

Factors Influencing Teaching Choice, Professional Plans about Teaching, and Future Time Perspective: A Mediational Analysis

Science.gov (United States)

Eren, Altay; Tezel, Kadir Vefa

2010-01-01

This study aimed to examine the mediating role of prospective English teachers' future time perspectives in relation to their motivations for teaching, beliefs about the profession, career choice satisfaction, and professional plans. A total of 423 prospective English teachers voluntarily participated in the study. The mediating role of the future…

Irradiation: Technology whose time has come?

International Nuclear Information System (INIS)

Schechter, M.

1985-01-01

The characteristics and application of food irradiation are briefly discussed, noting FDA's recent approval of the use of this technology to kill trichnella spirals in pork. Despite public concerns, food irradiation sources (gamma rays from Co-60 and Cs-137) are reported to leave no radioactivity in irradiated foods when used under FDA-approved guidelines. Food irradiation was legally ruled to be a 'food additive' by Congress in 1958 with FDA having regulatory authority; however, while low-level dosing has received FDA approval for sprout inhibition in root crops and as an insect control, concerns about cost-effectiveness, safety, and consumer acceptability have continued to limit high dose food irradiation (i.e., exposure to over 1000krad). The future acceptance of food irradiation still, primarily rests in the hands of food service professionals and their consumers

A review on the status and future trends of radiation processing in Iran

Directory of Open Access Journals (Sweden)

S.R. Rafiee

2017-10-01

Full Text Available A comprehensive review on the status of radiation processing and its future in Iran is presented since 32 years ago up to now to show the development of Iran's irradiation industry. Additionally, annual throughput of treated materials with their types and names are also given and also all of the radiation facilities both in service and under construction as well as the plans and estimations for establishing the new facilities are outlined. Our investigations show that the trend of radiation processing industry in Iran is growing rapidly.

Scenario planning.

Science.gov (United States)

Enzmann, Dieter R; Beauchamp, Norman J; Norbash, Alexander

2011-03-01

In facing future developments in health care, scenario planning offers a complementary approach to traditional strategic planning. Whereas traditional strategic planning typically consists of predicting the future at a single point on a chosen time horizon and mapping the preferred plans to address such a future, scenario planning creates stories about multiple likely potential futures on a given time horizon and maps the preferred plans to address the multiple described potential futures. Each scenario is purposefully different and specifically not a consensus worst-case, average, or best-case forecast; nor is scenario planning a process in probabilistic prediction. Scenario planning focuses on high-impact, uncertain driving forces that in the authors' example affect the field of radiology. Uncertainty is the key concept as these forces are mapped onto axes of uncertainty, the poles of which have opposed effects on radiology. One chosen axis was "market focus," with poles of centralized health care (government control) vs a decentralized private market. Another axis was "radiology's business model," with one pole being a unified, single specialty vs a splintered, disaggregated subspecialty. The third axis was "technology and science," with one pole representing technology enabling to radiology vs technology threatening to radiology. Selected poles of these axes were then combined to create 3 scenarios. One scenario, termed "entrepreneurialism," consisted of a decentralized private market, a disaggregated business model, and threatening technology and science. A second scenario, termed "socialized medicine," had a centralized market focus, a unified specialty business model, and enabling technology and science. A third scenario, termed "freefall," had a centralized market focus, a disaggregated business model, and threatening technology and science. These scenarios provide a range of futures that ultimately allow the identification of defined "signposts" that can

The dinoflagellate Akashiwo sanguinea will benefit from future climate change: The interactive effects of ocean acidification, warming and high irradiance on photophysiology and hemolytic activity.

Science.gov (United States)

Ou, Guanyong; Wang, Hong; Si, Ranran; Guan, Wanchun

2017-09-01

Due to global climate change, marine phytoplankton will likely experience low pH (ocean acidification), high temperatures and high irradiance in the future. Here, this work report the results of a batch culture experiment conducted to study the interactive effects of elevated CO 2 , increased temperature and high irradiance on the harmful dinoflagellate Akashiwo sanguinea, isolated at Dongtou Island, Eastern China Sea. The A. sanguinea cells were acclimated in high CO 2 condition for about three months before testing the responses of cells to a full factorial matrix experimentation during a 7-day period. This study measured the variation in physiological parameters and hemolytic activity in 8 treatments, representing full factorial combinations of 2 levels each of exposure to CO 2 (400 and 1000μatm), temperature (20 and 28°C) and irradiance (50 and 200μmol photons m -2 s -1 ). Sustained growth of A. sanguinea occurred in all treatments, but high CO 2 (HC) stimulated faster growth than low CO 2 (LC). The pigments (chlorophyll a and carotenoid) decreased in all HC treatments. The quantum yield (F v /F m ) declined slightly in all high-temperature (HT) treatments. High irradiance (HL) induced the accumulation of ultraviolet-absorbing compounds (UV abc ) irrespective of temperature and CO 2 . The hemolytic activity in the LC treatments, however, declined when exposed to HT and HL, but HC alleviated the adverse effects of HT and HL on hemolytic activity. All HC and HL conditions and the combinations of high temperature*high light (HTHL) and high CO 2 *high temperature*high light (HCHTHL) positively affected the growth in comparison to the low CO 2 *low temperature*low light (LCLTLL) treatment. High temperature (HT), high light (HL) and a combination of HT*HL, however, negatively impacted hemolytic activity. CO 2 was the main factor that affected the growth and hemolytic activity. There were no significant interactive effects of CO 2 *temperature*irradiance on growth

SU-F-T-429: Craniospinal Irradiation by VMAT Technique: Impact of FFF Beam and High Resolution MLC On Plan Quality

Energy Technology Data Exchange (ETDEWEB)

Ganesh, T; Sarkar, B; Munshi, A; Mohanti, B [Fortis Memorial Research Institute, Gurgaon, Haryana (India)

2016-06-15

Purpose: Objective of this study was to evaluate the impact of using flattening filter free (FFF) beam with 0.5 cm multileaf collimator (MLC) leaves over conventional flattened beam with 1 cm leaf width MLC on the treatment plan quality in cranio-spinal irradiation (CSI). Methods: For five medulloblastoma cases (3 males and 2 females), who were previously treated by volumetric modulated arc therapy (VMAT) technique using conventional flattened beam shaped by 1 cm width MLC leaves, four test plans were generated and compared against the delivered plan. These retrospective plans consisted of four different combinations of flattened and FFF beams from Elekta’s Agility treatment head with 0.5 cm width MLC leaves. Sparing of organs at risks (OAR) in terms of dose to 5%, 50%, 75% and 90% volumes, mean and maximum dose were evaluated. Results: All plans satisfied the planning objective of covering 95% of PTV by at least 95% of prescription dose. Marginal variation of dose spillage was observed between different VMAT plans at very low dose range (1–5 Gy). Variation in dose statistics for PTVs and OARs were within 1% or 1 Gy. Amongst the five plans, the plan with flattened beam with 1 cm MLC had the highest number of MUs, 2.13 times higher than the plan with Agility MLC with FFF beam that had the least number of MUs. No statistically significant difference (p≥0.05) was observed between the reference plan and the retrospectively generated plans in terms of PTV coverage, cold spot, hot spot and organ at risk doses. Conclusion: In the treatment of CSI cases by VMAT technique, FFF beams and/or finer width MLC did not exhibit advantage over the flattened beams or wider MLC in terms of plan quality except for reduction in MUs.

Irradiation sequels of retinoblastomas

International Nuclear Information System (INIS)

Benk, V.; Habrand, J.L.; Bloch Michel, E.; Soussaline, M.; Sarrazin, D.

1993-01-01

From 1975 to 1985, 34 children with a non-metastatic retinoblastoma were irradiated at the Institut Gustave-Roussy. After enucleation, 19 bilateral tumors were irradiated by two lateral opposed fields and 15 unilateral tumors by one lateral and anterior field, in the case of optic nerve being histologically positive. Dose was 45 Gy, 1.8 Gy per fraction. The 10-year-survival rate for unilateral and bilateral retinoblastomas was 79%. Long term sequels were available for 25 patients: 88% retained one functional eye. Three children with bilateral retinoblastomas developed a cataract in the residual eye between 2 and 5 years after irradiation, none with unilateral tumor. Nine patients (36%), seven with unilateral and two with bilateral tumor developed a cosmetical problem that required multiple surgical rehabilitation between 3 and 14 years after irradiation. Nine children (36%), five with unilateral and four with bilateral tumors developed growth hormone deficit between 2 and 8 years after irradiation that required hormone replacement. Their pituitary gland received 22 to 40 Gy. No osteosarcoma occurred in this population. Among long-term sequels, following irradiation for retinoblastoma, cosmetical deformities represent disabling sequels that could justify new approaches in radiotherapy, as protontherapy combined with 3-D-treatment planning

Future Plans of the ATLAS Collaboration for the HL-LHC

CERN Document Server

Hristova, Ivana; The ATLAS collaboration

2018-01-01

These proceedings report the current plans to upgrade the ATLAS detector at CERN for the High Luminosity LHC (HL-LHC). The HL-LHC is expected to start operations in the middle of 2026, aiming to reach an ultimate peak instantaneous luminosity of 7.5$\\times10^{34}$cm$^{-2}$s$^{-1}$, corresponding to approximately 200 inelastic proton-proton collisions per bunch crossing, and to deliver over a period of twelve years more than ten times the integrated luminosity of the large hadron collider (LHC) Runs 1-3 combined (up to $4000$ fb$^{-1}$). This is a huge challenge to all sub-systems of the detector which will need extensive upgrades to allow the experiment to pursue a rich and interesting physics programme in the future.

Fukushima and energy plans for the future - I

International Nuclear Information System (INIS)

Pal, M.K.

2012-01-01

Till the fatal day of March 11, 2011, Japan had 55 nuclear reactors in operation generating about 27.3 per cent of her total supply of electricity and the country had an ambitious future plan of further building up the nuclear capacity to meet half of its national demand of electricity from nuclear reactors. Toshiba Corporation of Japan is one of the biggest and most successful names as the manufacturers of commercial nuclear reactors and, at present, they have acquired ownership of electric power companies in other countries as well. The Westinghouse of USA, for example, is presently owned by Toshiba. Japan and her people have earned the praise, for many years, of the nuclear lobbyists around the world for having opted for nuclear energy in a big way despite the fact that the Japanese are the only people that have experienced the nuclear holocaust of Hiroshima and Nagasaki. Some home truth about this popular acceptance of nuclear reactors in Japan will be revealed later in this article

Current status and future plan of the G.A. Siwabessy Multipurpose Reactor

Energy Technology Data Exchange (ETDEWEB)

Hastowo, Hudi; Tarigan, Alim; Mardi, Alfahari [Centre for Multipurpose Reactor, National Atomic Energy Agency, Serpong (Indonesia)

1998-10-01

Since the first criticality in July 1987, the G.A. Siwabessy Multipurpose Reactor, RSG-GAS, in Serpong-Indonesia has been operated about 26.000 hours up to now. In the last two years the reactor is operated more than 5000 hours per year or equivalent to seven cycles a year. The reactor is utilized for conducting research studies and isotopes production. In the near future the core will be converted to silicide fuel to improve the core performance instead of oxide fuel. The planned maintenance activities are performed according to the schedule. The modifications and remedial maintenance are also performed to ensure that all structures, systems and important to safety are capable of performing as intended. The future activities of the G.A. Siwabessy reactor will be stressed to maintain the reliability and availability of the reactor operation and to optimize the reactor utilization. (author)

Report on salvage of a jammed cobalt-60 source of the gamma beam irradiator at Bangladesh Institute of Nuclear Agriculture (BINA), Mymensingh, Bangladesh

International Nuclear Information System (INIS)

Karim, S.M.F.; Awal, K.O.; Ali, M.A.T.

1997-01-01

This report is the follow-up of a recovery plan for a Co-60 source that was presented at the proceedings of a symposium at the International Atomic Energy Agency, Vienna during 6-10 November 1989. This report deals mainly with technical measures adopted to salvage the jammed Co-60 source of a gamma irradiator at the Bangladesh Institute of Nuclear Agriculture BINA, Mymensingh, Bangladesh. Different tools and devices were developed to allow the remote recovery of the source. The radiation safety measures taken and the device drawings are given, together with suggestions for future use of the source with the remaining activity for irradiation purposes. (author)

Status of muon collider research and development and future plans

Directory of Open Access Journals (Sweden)

1999-08-01

Full Text Available The status of the research on muon colliders is discussed and plans are outlined for future theoretical and experimental studies. Besides work on the parameters of a 3–4 and 0.5 TeV center-of-mass (COM energy collider, many studies are now concentrating on a machine near 0.1 TeV (COM that could be a factory for the s-channel production of Higgs particles. We discuss the research on the various components in such muon colliders, starting from the proton accelerator needed to generate pions from a heavy-Z target and proceeding through the phase rotation and decay (π→μν_{μ} channel, muon cooling, acceleration, storage in a collider ring, and the collider detector. We also present theoretical and experimental R&D plans for the next several years that should lead to a better understanding of the design and feasibility issues for all of the components. This report is an update of the progress on the research and development since the feasibility study of muon colliders presented at the Snowmass '96 Workshop [R. B. Palmer, A. Sessler, and A. Tollestrup, Proceedings of the 1996 DPF/DPB Summer Study on High-Energy Physics (Stanford Linear Accelerator Center, Menlo Park, CA, 1997].

Treatment planning for conformation therapy using a multi-leaf collimator

International Nuclear Information System (INIS)

Boesecke, R.; Doll, J.; Bauer, B.; Schlegel, W.; Pastyr, O.; Lorenz, W.J.

1988-01-01

In high energy photon therapy an optimum dose distribution is achieved with an irradiation from several directions, thus adapting the field shape to the target volume. Some methods of irradiation planning using these techniques are presented. The result of such a treatment planning is demonstrated. (orig.) [de

Modification of parotids in case of conformal ORL irradiation

International Nuclear Information System (INIS)

Louvel, G.; Lafond, C.; Manens, J.P.; Jouyaux, F.; Williaume, D.; Le Prise, E.; Crevoisier, R. de; Cazoulat, G.; Simon, A.; Haigron, P.

2009-01-01

The objective of the study is to analyze the anatomical modifications of the parotids in case of tumors irradiation of the O.R.L. area. In case of irradiation of the O.R.L. area the parotids reduce about one third of their volume, by moving inwards and backwards. The dose received by these glands at the end of irradiation can be different from this one initially planned. (N.C.)

Environmental studies for mining of deep-sea polymetallic nodules - Accomplishments and future plans

Digital Repository Service at National Institute of Oceanography (India)

Sharma, R.

on marine ecosystem, the project on ‘EIA studies for nodule mining in CIB’ was initiated in 1996, under the national programme on polymetallic nodules funded by the Dept. of Ocean Development. Mining of the deep-sea minerals [1] is expected to alter... for the future • Development of predictive ecosystem models • Creation of environmental database • Evaluating the biogeochemical coupling of biota with deep-sea ecosystem • Development of environment management plan for nodule mining References...

Irradiation of meningioma: a prototype circumscribed tumor for planning high-dose irradiation of the brain

International Nuclear Information System (INIS)

Friedman, M.

1977-01-01

The purpose of this report is to provide specific data concerning the radiation dose required to destroy meningioma, and to demonstrate that radiation doses much greater than the alleged tolerance dose, can be administered to the brain in some patients. Most meninglomas are not responsive to irradiation, but, some surgically incurable lesions benefit from irradiation with radically high doses to small volumes of tissue. The arrest of 7 of 12 consecutive meningiomas in adults for periods of 2 to 17 years following maximum tumor doses up to 8800 R in 40 days is reported in this paper. All patients, when irradiated, had active tumor in the form of inoperable primary tumor, recurrence, or known postoperative residual tumor. Three of the successful results were achieved with orthovoltage radiation. The incidence of brain damage may be acceptable to the patient when it is related to arrest of tumor growth but he must be forewarned of possible brain damage. The factors influencing the radioresponsiveness of meningioma are: the required tumor lethal dose, histology and vascularity of the tumor, anatomical site in the brain, treatment technique for each tumor site, small size of the treated volume, growth rate of the tumor, displacement of normal brain tissue by tumor, inherent individual variations of tumor and normal tissues, quality of the radiation, and tolerance of normal brain tissues. The role of these factors is discussed in the light of modern radiobiological concepts

Craniospinal irradiation techniques

Energy Technology Data Exchange (ETDEWEB)

Scarlatescu, Ioana, E-mail: scarlatescuioana@gmail.com; Avram, Calin N. [Faculty of Physics, West University of Timisoara, Bd. V. Parvan 4, 300223 Timisoara (Romania); Virag, Vasile [County Hospital “Gavril Curteanu” - Oradea (Romania)

2015-12-07

In this paper we present one treatment plan for irradiation cases which involve a complex technique with multiple beams, using the 3D conformational technique. As the main purpose of radiotherapy is to administrate a precise dose into the tumor volume and protect as much as possible all the healthy tissues around it, for a case diagnosed with a primitive neuro ectoderm tumor, we have developed a new treatment plan, by controlling one of the two adjacent fields used at spinal field, in a way that avoids the fields superposition. Therefore, the risk of overdose is reduced by eliminating the field divergence.

Ions irradiation on bi-layer coatings

Science.gov (United States)

Tessarolo, Enrico; Corso, Alain Jody; Böttger, Roman; Martucci, Alessandro; Pelizzo, Maria G.

2017-09-01

Future space missions will operate in very harsh and extreme environments. Optical and electronics components need to be optimized and qualified in view of such operational challenges. This work focuses on the effect of low alpha particles irradiation on coatings. Low energy He+ (4 keV and 16 keV) ions have been considered in order to simulate in laboratory the irradiation of solar wind (slow and fast components) alpha particles. Mono- and proper bi-layers coatings have been investigated. The experimental tests have been carried out changing doses as well as fluxes during the irradiation sessions. Optical characterization in the UV-VIS spectral range and superficial morphological analysis have performed prior and after irradiation.

Behavior of optical fibers under heavy irradiation

International Nuclear Information System (INIS)

Kakuta, T.; Sagawa, T.

1998-01-01

Several kinds of optical diagnostics are planned in a fusion reactor. Complicated optical systems such as periscopes are thought to be primary candidates for optical measurements, especially for visible wavelengths. However, optical fibers have several advantages over such optical systems. Also, the optical fibers could be a far better transmission line for signals under a high electromagnetic field. However, they have been considered vulnerable to heavy irradiation. In this study, several kinds of optical fibers were irradiated in the JMTR fission reactor. The optical transmissivity in fibers was measured in situ during fast neutron and gamma irradiation, up to doses of 2 x 10 24 n m -2 and 5 x 10 9 Gy, respectively. The irradiation temperature ranged from 300 to 700 K. For pure ionizing irradiation environments, some methods for improving the radiation resistance of optical fibers were indicated. The results showed that effects of the irradiation associated with fast neutrons would be different from the effects of pure ionizing irradiation. Some fibers were found to withstand the heavy irradiation, especially in an infrared wavelength range. (orig.)

Microstructural evolution of nanochannel CrN films under ion irradiation at elevated temperature and post-irradiation annealing

Science.gov (United States)

Tang, Jun; Hong, Mengqing; Wang, Yongqiang; Qin, Wenjing; Ren, Feng; Dong, Lan; Wang, Hui; Hu, Lulu; Cai, Guangxu; Jiang, Changzhong

2018-03-01

High-performance radiation tolerance materials are crucial for the success of future advanced nuclear reactors. In this paper, we present a further investigation that the "vein-like" nanochannel films can enhance radiation tolerance under ion irradiation at high temperature and post-irradiation annealing. The chromium nitride (CrN) nanochannel films with different nanochannel densities and the compact CrN film are chosen as a model system for these studies. Microstructural evolution of these films were investigated using Transmission Electron Microscopy (TEM), Scanning Electron Microscopy (SEM), Elastic Recoil Detection (ERD) and Grazing Incidence X-ray Diffraction (GIXRD). Under the high fluence He+ ion irradiation at 500 °C, small He bubbles with low bubble densities are observed in the irradiated nanochannel CrN films, while the aligned large He bubbles, blistering and texture reconstruction are found in the irradiated compact CrN film. For the heavy Ar2+ ion irradiation at 500 °C, the microstructure of the nanochannel CrN RT film is more stable than that of the compact CrN film due to the effective releasing of defects via the nanochannel structure. Under the He+ ion irradiation and subsequent annealing, compared with the compact film, the nanochannel films have excellent performance for the suppression of He bubble growth and possess the strong microstructural stability. Basing on the analysis on the sizes and number densities of bubbles as well as the concentrations of He retained in the nanochannel CrN films and the compact CrN film under different experimental conditions, potential mechanism for the enhanced radiation tolerance are discussed. Nanochannels play a crucial role on the release of He/defects under ion irradiation. We conclude that the tailored "vein-like" nanochannel structure may be used as advanced radiation tolerance materials for future nuclear reactors.

JOYO-1 Irradiation Test Campaign Technical Close-out, For Information

International Nuclear Information System (INIS)

G. Borges

2006-01-01

The JOYO-1 irradiation testing was designed to screen the irradiation performance of candidate cladding, structural and reflector materials in support of space reactor development. The JOYO-1 designation refers to the first of four planned irradiation tests in the JOYO reactor. Limited irradiated material performance data for the candidate materials exists for the expected Prometheus-1 duration, fluences and temperatures. Materials of interest include fuel element cladding and core materials (refractory metal alloys and silicon carbide (Sic)), vessel and plant structural materials (refractory metal alloys and nickel-base superalloys), and control and reflector materials (BeO). Key issues to be evaluated were long term microstructure and material property stability. The JOYO-1 test campaign was initiated to irradiate a matrix of specimens at prototypical temperatures and fluences anticipated for the Prometheus-1 reactor [Reference (1)]. Enclosures 1 through 9 describe the specimen and temperature monitors/dosimetry fabrication efforts, capsule design, disposition of structural material irradiation rigs, and plans for post-irradiation examination. These enclosures provide a detailed overview of Naval Reactors Prime Contractor Team (NRPCT) progress in specific areas; however, efforts were in various states of completion at the termination of NRPCT involvement with and restructuring of Project Prometheus

JOYO-1 Irradiation Test Campaign Technical Close-out, For Information

Energy Technology Data Exchange (ETDEWEB)

G. Borges

2006-01-31

The JOYO-1 irradiation testing was designed to screen the irradiation performance of candidate cladding, structural and reflector materials in support of space reactor development. The JOYO-1 designation refers to the first of four planned irradiation tests in the JOYO reactor. Limited irradiated material performance data for the candidate materials exists for the expected Prometheus-1 duration, fluences and temperatures. Materials of interest include fuel element cladding and core materials (refractory metal alloys and silicon carbide (Sic)), vessel and plant structural materials (refractory metal alloys and nickel-base superalloys), and control and reflector materials (BeO). Key issues to be evaluated were long term microstructure and material property stability. The JOYO-1 test campaign was initiated to irradiate a matrix of specimens at prototypical temperatures and fluences anticipated for the Prometheus-1 reactor [Reference (1)]. Enclosures 1 through 9 describe the specimen and temperature monitors/dosimetry fabrication efforts, capsule design, disposition of structural material irradiation rigs, and plans for post-irradiation examination. These enclosures provide a detailed overview of Naval Reactors Prime Contractor Team (NRPCT) progress in specific areas; however, efforts were in various states of completion at the termination of NRPCT involvement with and restructuring of Project Prometheus.

Prospective Teachers' Future Time Perspective and Professional Plans about Teaching: The Mediating Role of Academic Optimism

Science.gov (United States)

Eren, Altay

2012-01-01

This study aimed to examine the mediating role of prospective teachers' academic optimism in the relationship between their future time perspective and professional plans about teaching. A total of 396 prospective teachers voluntarily participated in the study. Correlation, regression, and structural equation modeling analyses were conducted in…

IMRT and 3D conformal radiotherapy with or without elective nodal irradiation in locally advanced NSCLC: A direct comparison of PET-based treatment planning.

Science.gov (United States)

Fleckenstein, Jochen; Kremp, Katharina; Kremp, Stephanie; Palm, Jan; Rübe, Christian

2016-02-01

The potential of intensity-modulated radiation therapy (IMRT) as opposed to three-dimensional conformal radiotherapy (3D-CRT) is analyzed for two different concepts of fluorodeoxyglucose positron emission tomography (FDG PET)-based target volume delineation in locally advanced non-small cell lung cancer (LA-NSCLC): involved-field radiotherapy (IF-RT) vs. elective nodal irradiation (ENI). Treatment planning was performed for 41 patients with LA-NSCLC, using four different planning approaches (3D-CRT-IF, 3D-CRT-ENI, IMRT-IF, IMRT-ENI). ENI included a boost irradiation after 50 Gy. For each plan, maximum dose escalation was calculated based on prespecified normal tissue constraints. The maximum prescription dose (PD), tumor control probability (TCP), conformal indices (CI), and normal tissue complication probabilities (NTCP) were analyzed. IMRT resulted in statistically significant higher prescription doses for both target volume concepts as compared with 3D-CRT (ENI: 68.4 vs. 60.9 Gy, p ENI, there was a considerable theoretical increase in TCP (IMRT: 27.3 vs. 17.7 %, p ENI: 12.3 vs. 30.9 % p < 0.0001; IF: 15.9 vs. 24.1 %; p < 0.001). The IMRT technique and IF target volume delineation allow a significant dose escalation and an increase in TCP. IMRT results in an improved sparing of OARs as compared with 3D-CRT at equivalent dose levels.

Ultrasonic and computed tomography in radiotherapy planning - a comparison

International Nuclear Information System (INIS)

Schertel, L.

1980-01-01

The precondition of any radiotherapy is radiation planning. This must be done individually for every patient and must be applicable for any region of the body. Modern irradiation planning requires pictures of the body parts concerned; these can be made by means of the ultrasonic method and computed tomography. This comparative investigation leads to the result (see fig. 4 and 5) that computed tomographic body part pictures should be preferred to those made sonographically. The opinion of Huenig and Co. [8] that ultrasonic tomography will soon lose some of its importance within irradiation planning once computed tomography is introduced could be confirmed by the latest developments. The authors can confirm this also out of their own experience and agree with Winkel and Hermann [23] that computed tomography cannot be done without any more irradiation planning. (orig.) [de

Simulating 60 Co gamma irradiation systems

International Nuclear Information System (INIS)

Omi, Nelson M.; Rela, Paulo R.

2000-01-01

The use of Cadgamma, a software dedicated to simulate 60 Co gamma irradiation systems, can lead to an optimized process and simulating, in a few hours, many configurations setups for the irradiation elements. The software can also simulate changes in the path of the product and the influence of any steady body like the support of the product support and source shoulders. These simulations minimize the number of dose mapping tests in industrial applications and allow the study of unusual setups. Cadgamma was developed at IPEN to simulate it is multipurpose 60 Co irradiation system, under construction and planned to be operating by the second half of 2001. The software was used on project stage and will help to optimize the irradiation process for each product to be treated. (author)

Monte Carlo Treatment Planning for Advanced Radiotherapy

DEFF Research Database (Denmark)

Cronholm, Rickard

This Ph.d. project describes the development of a workflow for Monte Carlo Treatment Planning for clinical radiotherapy plans. The workflow may be utilized to perform an independent dose verification of treatment plans. Modern radiotherapy treatment delivery is often conducted by dynamically...... modulating the intensity of the field during the irradiation. The workflow described has the potential to fully model the dynamic delivery, including gantry rotation during irradiation, of modern radiotherapy. Three corner stones of Monte Carlo Treatment Planning are identified: Building, commissioning...... and validation of a Monte Carlo model of a medical linear accelerator (i), converting a CT scan of a patient to a Monte Carlo compliant phantom (ii) and translating the treatment plan parameters (including beam energy, angles of incidence, collimator settings etc) to a Monte Carlo input file (iii). A protocol...

Food irradiation in the UK and the European Directive

Energy Technology Data Exchange (ETDEWEB)

Woolston, John E-mail: johnw@isotron.co.uk

2000-03-01

Food irradiation in the UK has been authorised since the early 1990s. In principle it is possible to irradiate a wide range of foods for a variety of purposes. In practice food irradiation is virtually non-existent. The structure of food retailing in the UK, a continual stream of food safety scares and a developing public 'crisis of confidence' in the food producer/supply chain have combined to make the future for food irradiation look bleak. The new European Directive on Food Irradiation is unlikely to alter this outlook. (author)

Food irradiation in the UK and the European Directive

International Nuclear Information System (INIS)

Woolston, John

2000-01-01

Food irradiation in the UK has been authorised since the early 1990s. In principle it is possible to irradiate a wide range of foods for a variety of purposes. In practice food irradiation is virtually non-existent. The structure of food retailing in the UK, a continual stream of food safety scares and a developing public 'crisis of confidence' in the food producer/supply chain have combined to make the future for food irradiation look bleak. The new European Directive on Food Irradiation is unlikely to alter this outlook. (author)

Older and Younger Family Caregivers of Adults with Intellectual Disability: Factors Associated with Future Plans

Science.gov (United States)

Chou, Yueh-Ching; Lee, Yue-Chune; Lin, Li-Chan; Kroger, Teppo; Chang, Ai-Ning

2009-01-01

A structured interview survey was conducted in a major city in Taiwan to explore and compare older and younger family primary caregivers' well being and their future caregiving plans for these adults with intellectual disability. The sample size was 315 caregivers who were 55 years or older and who cared for adults with intellectual disability and…

Improvement of dose distribution of esophageal irradiation using the field-within-a-field technique

International Nuclear Information System (INIS)

Iwai, Tsugunori; Okabe, Keigo; Yamato, Hidetada; Murakami, Jyunji; Nakazawa, Yasuo; Kato, Mitsuyoshi

2002-01-01

The wide radiation field for mediastinal dose distribution should be inhomogeneous with the usual simple opposed beam irradiation. The purpose of this study was to improve the dose distribution of the mediastinum using a conventional planning system with a dose-volume histogram (DVH) and the field-in-field technique. Three-dimensional (3D) dose distribution is obtained in bilateral opposed-field irradiation. An overdose area obtained from the 3D dose distribution is defined and reprojected into the irradiation field. A new reduced field is created by removing the reprojected overdose area. A 3D dose distribution is again obtained and compared with the results from first one. Procedures were repeated until each of the target volumes was within ±5% of the prescribed dose and the irradiation volume within 107% or less of the prescribed dose. From the DVH analysis, our field-within-a-field technique resulted in a more uniform dose distribution within the conventional planning. The field-within-a-field technique involves many parameters, and an inverse planning algorithm is suitable for computation. However, with our method, the forward planning system is adequate for planning, at least in a relatively straightforward planning system such as bilateral opposed fields therapy. (author)

Food problems and food irradiation, recent trend

International Nuclear Information System (INIS)

1990-01-01

Food irradiation is to contribute to the stable security of foodstuffs which is the fundamental condition of human survival by improving the preservation of foodstuffs and food sanitation utilizing the biological effect due to irradiation. The research and development have been carried out internationally since 1950s, but after the safety declaration of irradiated foods in 1980 by the international organ concerned, the permission and practical use for foods in various foreign countries, the technology transfer to developing countries and so on have been advanced. At present, food irradiation is permitted in 38 countries, and the practical irradiation is carried out in 24 countries. In Japan, the irradiation of potatoes to prevent germination was permitted in 1972, and the practical irradiation on potatoes of yearly 15,000 t is carried out. In the near future, irradiated foods will appear in international foodstuff market, and Japan which imports foodstuffs must cope with them. Foodstuffs and the safety, food irradiation, the soundness of irradiated foods, food irradiation in various foreign countries and Japan, the trend of international organs and the criticism of food irradiation are reported. (K.I.)

Irradiation environment and materials behavior

International Nuclear Information System (INIS)

Ishino, Shiori

1992-01-01

Irradiation environment is unique for materials used in a nuclear energy system. Material itself as well as irradiation and environmental conditions determine the material behaviour. In this review, general directions of research and development of materials in an irradiation environment together with the role of materials science are discussed first, and then recent materials problems are described for energy systems which are already existing (LWR), under development (FBR) and to be realized in the future (CTR). Topics selected are (1) irradiation embrittlement of pressure vessel steels for LWRs, (2) high fluence performance of cladding and wrapper materials for fuel subassemblies of FBRs and (3) high fluence irradiation effects in the first wall and blanket structural materials of a fusion reactor. Several common topics in those materials issues are selected and discussed. Suggestions are made on some elements of radiation effects which might be purposely utilized in the process of preparing innovative materials. (J.P.N.) 69 refs

Contributions of imaging to radiation therapy planning for uterine cervix carcinoma

International Nuclear Information System (INIS)

Thomas, L.

2000-01-01

External irradiation and brachytherapy are curative in the treatment of carcinoma of the cervix. The aim of radiotherapy is to optimize the irradiation of the target volume and to optimize the irradiation of the target volume and to reduce the dose to critical organs. The use of imaging (computed tomography and magnetic resonance imaging (computed tomography and magnetic resonance imaging added to clinical findings and standard guidelines) are studied in the treatment planning of external irradiation and brachytherapy in carcinoma of the cervix. Imaging allows an individualized and conformal treatment planning. (author)

Three-dimensional irradiation planning of laryngeal and hypopharyngeal cancers based on phantom examinations Pt. 2

International Nuclear Information System (INIS)

Esik, Olga; Schlegel, Wolfgang; Doll, Josef; Nemeth, Gyoergy; Lorenz, W.J.

1989-01-01

Three-dimensional dose distributions were computed for the photon radiotherapy of laryngeal and hypopharyngeal cancers using a pair of symmetrical wedges in a coaxial pair of opposing lateral beams in fixed positions. Treatment plans obtained with wedged and open fields under various irradiation conditions ( 60 Co gamma unit, photon beams from a 6 MeV and a 15 MeV linear accelerator) are analyzed and compared. The homogeneity of dose distribution for the target volume at cobalt gamma ray was moderately improved using wedges. The use of 6 MeV x-ray wedging slightly decreases the uniformity of the tumor dose distribution. At 15 MeV wedging produces no improvement on the homogeneity of the dose delivered to the target volume. Thus it seems that the application of wedges is not advantageous in this field of radiotherapy. (author) 8 refs.; 13 figs

Food irradiation 2009

International Nuclear Information System (INIS)

Narvaiz, Patricia

2009-01-01

Food irradiation principles; its main applications, advantages and limitations; wholesomeness, present activities at Ezeiza Atomic Centre; research coordinated by the International Atomic Energy Agency; capacity building; and some aspects on national and international regulations, standards and commercialization are briefly described. At present 56 countries authorize the consumption of varied irradiated foods; trade is performed in 32 countries, with about 200 irradiation facilities. Argentina pioneered nuclear energy knowledge and applications in Latin America, food irradiation included. A steady growth of food industrial volumes treated in two gamma facilities can be observed. Food industry and producers show interest towards new facilities construction. However, a 15 years standstill in incorporating new approvals in the Argentine Alimentary Code, in spite of consecutive request performed either by CNEA or some food industries restricts, a wider industrial implementation, which constitute a drawback to future regional commercialization in areas such as MERCOSUR, where Brazil since 2000 freely authorize food irradiation. Besides, important chances in international trade with developed countries will be missed, like the high fresh fruits and vegetables requirements United States has in counter-season, leading to convenient sale prices. The Argentine food irradiation facilities have been designed and built in the country. Argentina produces Cobalt-60. These capacities, unusual in the world and particularly in Latin America, should be protected and enhanced. Being the irradiation facilities scarce and concentrated nearby Buenos Aires city, the possibilities of commercial application and even research and development are strongly limited for most of the country regions. (author) [es

Industrial irradiators and their radioprotection

Energy Technology Data Exchange (ETDEWEB)

Rodrigues Junior, Ary de Araujo (ed.)

2018-04-01

In this book you will learn how the gamma irradiators and accelerators for industry and research applications work and all the radioprotection safety items that should be followed when operating them. This book was written mainly for those who intend to become Radiation Safety Officers (RSO) responsible for the operation of gamma irradiators, but it is also useful to business people who plan to embark on this area or for those who are simply curious. This book is only an introduction to the subject and is far from being exhaustive. (author)

77 FR 30903 - Connect America Fund; A National Broadband Plan for Our Future; Establishing Just and Reasonable...

Science.gov (United States)

2012-05-24

... America Fund; A National Broadband Plan for Our Future; Establishing Just and Reasonable Rates for Local Exchange Carriers; High-Cost Universal Service Support AGENCY: Federal Communications Commission. ACTION... of information collections associated with the Commission's; Connect America Fund; A National...

A novel way to estimate the nanoindentation hardness of only-irradiated layer and its application to ion irradiated Fe-12Cr alloy

Energy Technology Data Exchange (ETDEWEB)

Kim, Hoon-Seop; Lee, Dong-Hyun; Seok, Moo-Young; Zhao, Yakai; Kim, Woo-Jin [Division of Materials Science and Engineering, Hanyang University, Seoul 04763 (Korea, Republic of); Kwon, Dongil [Department of Materials Science and Engineering, Seoul National University, Seoul 08826 (Korea, Republic of); Jin, Hyung-Ha, E-mail: hhajin2@kaeri.re.kr [Nuclear Materials Safety Research Division, Korea Atomic Energy Research Institute, Daejeon 34057 (Korea, Republic of); Kwon, Junhyun [Nuclear Materials Safety Research Division, Korea Atomic Energy Research Institute, Daejeon 34057 (Korea, Republic of); Jang, Jae-il, E-mail: jijang@hanyang.ac.kr [Division of Materials Science and Engineering, Hanyang University, Seoul 04763 (Korea, Republic of)

2017-04-15

While nanoindentation is a very useful tool to examine the mechanical properties of ion irradiated materials, there are some issues that should be considered in evaluating the properties of irradiated layer. In this study, in order to properly extract the hardness of only-irradiated layer from nanoindentation data, a new procedure is suggested in consideration of the geometry of indentation-induced plastic zone. By applying the procedure to an ion irradiated Fe-12Cr alloy, the reasonable results were obtained, validating its usefulness in the investigation of practical effect of irradiation on the mechanical behavior of future nuclear materials.

Practical application of food irradiation in Turkey

International Nuclear Information System (INIS)

Cetinkaya, N.; Erhan, I.C.

2002-01-01

Turkey is the world's leading producer and exporter of dried fruits (dried figs, raisins,and dried apricots etc.) and nuts (hazelnuts, wall nuts, pistachios, peanuts etc.) all of which have to be fumigated by methyl bromide a few times prior to export. Last fumigation is obligatory before shipment according to current quarantine treatment. Methyl Bromide (MeBr) fumigation is the most commonly used insect quarantine treatment for dried fruits and nuts in Turkey to protect from potential infestations. In accordance with the Montreal Protocol, Turkey as an Article 5(1) country will take actions to regulate and take measures to phase-out MeBr use. So, Turkey has to total phase-out in 2015 but according to Turkey MeBr Phase-out Action Plan prepared and published by The Ministry of Agriculture and Rural affairs in 2001, using MeBr should be reduced for stored commodities by 50 % by 2002 and phased-out totally by 2004. Irradiation technology is ready as an alternative to MeBr fumigation under the Action Plan of Turkey. Intensive research studies on food irradiation in Turkey have started in early 1970's and have still been continued. After careful and intensive works of all related authorities and specialists for a long period and with the help of ICGFI, the food irradiation regulation of Turkey was published in Official Newspaper on November 6, 1999. Having the Food Irradiation Regulation has supported to initiate commercialization study in Turkey in Co-operation with IAEA (TUR 5022). Feasibility study of a commercial food irradiation facility for the potential application of food irradiation in Turkey was prepared by IAEA experts Dr.M.Ahmed and Ir. J.P.Lacroix and together with TUR 5022 Research Team in April 2001 in Izmir, Turkey. Gamma-Pak Irradiation Facility in Cerkeskoy-Tekirdag got the commercial food irradiation licence and registration certificate in Feb. 2002. Practical application of food irradiation is getting more attraction in Turkey in parallel with other

Improvement and utilization of irradiation capsule technology in HANARO

International Nuclear Information System (INIS)

Choo, Kee-Nam; Cho, Man-Soon; Kim, Bong-Goo; Lee, Cheol-Yong; Yang, Sung-Woo; Shin, Yoon-Taek; Park, Seng-Jae; Jung, Hoan-Sung

2012-01-01

Several improvements of irradiation capsule technology regarding irradiation test parameters, such as temperature and neutron flux/fluence, and regarding instrumentation have progressed at HANARO since the last KAERI-JAERI joint seminar held in 2008. The standard HANARO capsule technology that was developed for use in a commercial power plant temperature of about 300degC was improved to apply to a temperature range of 100-1000degC for the irradiation test of materials of new research reactors and future nuclear systems. Low-flux and long-term irradiation technologies have been developed at HANARO. As a beginning step of the localization of capsule instrumentation technology, the irradiation performance of a domestically produced thermocouple and LVDT will be examined at HANARO. The accuracy of an evaluation of neutron fluence and precise welding technology are also being examined at HANARO. Based on these accumulated capsule technologies, a HANARO irradiation capsule system is being actively utilized for the national R and D programme on commercial nuclear reactors and nuclear fuel cycle technology in Korea. HANARO has recently started the irradiation support of R and D relevant to future nuclear systems including SMART, VHTR, and SFR, and HANARO is preparing new support relevant to new research and Fusion reactors. (author)

The present situation of the irradiation application industry and irradiation facilities in Japan

International Nuclear Information System (INIS)

Mizusawa, K.; Baba, T.

2003-01-01

The irradiation application industry and irradiation facilities in Japan have been making slow but steady progress for the past 2-3 years. Beside conventional applications, new ones such as carbon fibers and membrane filters have come into the market. There are a lot of new applications about to emerge. PE tubing, already is in the European market, is being evaluated by end users in Japan. Cleaning of dioxin in exhaust gas was successfully tested at a pilot plant. Cross-linked PTFE and polyamide are waiting customers' evaluations as an engineering plastic. Surface cross-linking of artificial polycarbonate teeth has yielded remarkable experimental results. Cross-linking of polycaprolactone will be useful for biodegradable products. Being aware of the future growth of irradiation industry, contract service providers opened new facilities or increased their capability. Beside in-house facilities, there are now three Co-60 facilities and nine EB facilities available for contract irradiation in Japan

Total lymphoid irradiation

International Nuclear Information System (INIS)

Sutherland, D.E.; Ferguson, R.M.; Simmons, R.L.; Kim, T.H.; Slavin, S.; Najarian, J.S.

1983-01-01

Total lymphoid irradiation by itself can produce sufficient immunosuppression to prolong the survival of a variety of organ allografts in experimental animals. The degree of prolongation is dose-dependent and is limited by the toxicity that occurs with higher doses. Total lymphoid irradiation is more effective before transplantation than after, but when used after transplantation can be combined with pharmacologic immunosuppression to achieve a positive effect. In some animal models, total lymphoid irradiation induces an environment in which fully allogeneic bone marrow will engraft and induce permanent chimerism in the recipients who are then tolerant to organ allografts from the donor strain. If total lymphoid irradiation is ever to have clinical applicability on a large scale, it would seem that it would have to be under circumstances in which tolerance can be induced. However, in some animal models graft-versus-host disease occurs following bone marrow transplantation, and methods to obviate its occurrence probably will be needed if this approach is to be applied clinically. In recent years, patient and graft survival rates in renal allograft recipients treated with conventional immunosuppression have improved considerably, and thus the impetus to utilize total lymphoid irradiation for its immunosuppressive effect alone is less compelling. The future of total lymphoid irradiation probably lies in devising protocols in which maintenance immunosuppression can be eliminated, or nearly eliminated, altogether. Such protocols are effective in rodents. Whether they can be applied to clinical transplantation remains to be seen

77 FR 35623 - Connect America Fund; a National Broadband Plan for Our Future; Establishing Just and Reasonable...

Science.gov (United States)

2012-06-14

... America Fund; a National Broadband Plan for Our Future; Establishing Just and Reasonable Rates for Local Exchange Carriers; High-Cost Universal Service Support AGENCY: Federal Communications Commission. ACTION... Fund, Report and Order (Order). The Commission submitted revisions to this information collection under...

Guidelines for acceptance of food irradiation

International Nuclear Information System (INIS)

1987-09-01

The purpose of the meeting was to develop an action plan which can be applied in countries with varying philosophies towards food irradiation, but which would help foster a common international attitude to what is undoubtedly a controversial issue. Basic recommendations were to: Identify target groups which influence policy in regard to food irradiation; Establish a cohesive marketing strategy with flexibility to meet varied national needs; Implement an ongoing communications system designed to reach and inform decision-makers; Work in each country through an information ''chain'' commencing with irradiation processors; Promote to - and through - the food industry as potentially the greatest beneficiaries; Set up an administrative ''Clearing House'' in each country to co-ordinate promotion efforts; Assemble ''Seeding Groups'' who will contact and communicate with other organizations; Aim for common international branding and packaging identification for irradiated foods

Planning and managing future space facility projects. [management by objectives and group dynamics

Science.gov (United States)

Sieber, J. E.; Wilhelm, J. A.; Tanner, T. A.; Helmreich, R. L.; Burgenbauch, S. F.

1979-01-01

To learn how ground-based personnel of a space project plan and organize their work and how such planning and organizing relate to work outcomes, longitudinal study of the management and execution of the Space Lab Mission Development Test 3 (SMD 3) was performed at NASA Ames Research Center. A view of the problems likely to arise in organizations and some methods of coping with these problems are presented as well as the conclusions and recommendations that pertain strictly to SMD 3 management. Emphasis is placed on the broader context of future space facility projects and additional problems that may be anticipated. A model of management that may be used to facilitate problem solving and communication - management by objectives (MBO) is presented. Some problems of communication and emotion management that MBO does not address directly are considered. Models for promoting mature, constructive and satisfying emotional relationships among group members are discussed.

Monitoring plan and maintenance NPP the Vandellos I and future prospects; Plan de vigilancia y mantenimiento de la instalacion nuclear Vandellos 1 y perspectivas de futuro

Energy Technology Data Exchange (ETDEWEB)

Margalef Escoda, S.

2013-07-01

This paper intends to give to know the singularities of an installation phase of latency and your monitoring and maintenance plan. the horizons that has the installation medium-term to guide the future dismantling level 3 monitoring and maintenance activities are also described.

Hospital organizational response to the nuclear accident at Three Mile Island: implications for future-oriented disaster planning

International Nuclear Information System (INIS)

Maxwell, C.

1982-01-01

The 1979 nuclear accident at Three Mile Island (TMI) near Harrisburg, Pennsylvania, caused severe organizational problems for neighboring health care institutions. Dauphin County, just north of TMI, contained four hospitals ranging in distance from 9.5 to 13.5 miles from the stricken plant. Crash plans put into effect within 48 hours of the initial incident successfully reduced hospital census to below 50 per cent of capacity, but retained bedridden and critically ill patients within the risk-zone. No plans existed for area-wide evacuation of hospitalized patients. Future-oriented disaster planning should include resource files of host institution bed capacity and transportation capabilities for the crash evacuation of hospitalized patients during non-traditional disasters

Radiation damage of pixelated photon detector by neutron irradiation

Energy Technology Data Exchange (ETDEWEB)

Nakamura, Isamu [KEK, 1-1 Oho Tsukuba 305-0801 (Japan)], E-mail: isamu.nakamura@kek.jp

2009-10-21

Radiation Damage of Pixelated Photon Detector by neutron irradiation is reported. MPPC, one of PPD or Geiger-mode APD, developed by Hamamatsu Photonics, is planned to be used in many high energy physics experiments. In such experiments radiation damage is a serious issue. A series of neutron irradiation tests is performed at the Reactor YAYOI of the University of Tokyo. MPPCs were irradiated at the reactor up to 10{sup 12}neutron/cm{sup 2}. In this paper, the effect of neutron irradiation on the basic characteristics of PPD including gain, noise rate, photon detection efficiency is presented.

Planning for the future

Energy Technology Data Exchange (ETDEWEB)

Rowland, B. [Ohio Automation (USA)

2004-02-01

The paper examines the potential of integrated computer-aided mine planning software, ICAMPS. This is Ohio Automation's complete mining software package that runs inside AutoCAD and covers the entire mining process - from geologic modelling of deposit to laying out of the mine, and scheduling and calculating royalty payments. The article describes the various modules of the system: MineSurf for geological modelling, MineSimU-Simulated mining for Underground; MineSimS-Simulated Mining for Surface and MineVent-Ventilation systems analysis. 2 figs.

Integral dose and evaluation of irradiated tissue volume

International Nuclear Information System (INIS)

Sivachenko, T.P.; Kalina, V.K.; Belous, A.K.; Gaevskij, V.I.

1984-01-01

Two parameters having potentialities of radiotherapy planning improvement are under consideration. One of these two parameters in an integral dose. An efficiency of application of special tables for integral dose estimation is noted. These tables were developed by the Kiev Physician Improvement Institute and the Cybernetics Institute of the Ukrainian SSR Academy of Science. The meaning of the term of ''irradiated tissue volume'' is specified, and the method of calculation of the irradiated tissue effective mass is considered. It is possible to evaluate with higher accuracy tolerance doses taking into account the irradiated mass

The TRIUMF thermal neutron facility as planned for operation by 1978

International Nuclear Information System (INIS)

Arrott, A.S.; Templeton, T.L.; Thorson, I.M.; Blaby, R.E.; Burgerjon, J.J.

1977-08-01

The concepts of the thermal neutron facility have been considerably modified since they were first put forth in 1971. The move has been toward simplification. This report describes the basic vacuum tank structure, its surrounding steel shielding and the concrete structure. The vacuum tank contains a target, moderator and reflector and has ports for the extraction of thermal neutron beams. It also has capabilities for producing mesons and for irradiation of targets in the primary proton beam. The system has been designed with flexibility for modification to meet possible future demands for irradiation facilities, radiography, or pulsed operation. The targets can be easily changed, and it is planned to do this to meet the heat transfer problems as they arise on going to higher beam currents. Feasibility studies for Pb-Bi and Pb targets have been carried out. The Pb target was chosen because of safety considerations and simpler design. (author)

Radiation processing. Current status and future possibilities

International Nuclear Information System (INIS)

Woods, R.J.

2000-01-01

Radiation processing developed following the Second World War and employees gamma- or electron-irradiation to process polymers, cure alkene-based inks and coatings, sterilize medical supplies, irradiate food, and manage wastes. The current status of these applications is described with the probable direction of future developments. (author)

Comprehensive Care Plan Development Using Resident Assessment Instrument Framework: Past, Present, and Future Practices

Directory of Open Access Journals (Sweden)

Mary Ellen Dellefield

2015-10-01

Full Text Available Development of the comprehensive care plan (CCP is a requirement for nursing homes participating in the federal Medicare and Medicaid programs, referred to as skilled nursing facilities. The plan must be developed within the context of the comprehensive interdisciplinary assessment framework—the Resident Assessment Instrument (RAI. Consistent compliance with this requirement has been difficult to achieve. To improve the quality of CCP development within this framework, an increased understanding of complex factors contributing to inconsistent compliance is required. In this commentary, we examine the history of the comprehensive care plan; its development within the RAI framework; linkages between the RAI and registered nurse staffing; empirical evidence of the CCP’s efficacy; and the limitations of extant standards of practices in CCP development. Because of the registered nurse’s educational preparation, professional practice standards, and licensure obligations, the essential contributions of professional nurses in CCP development are emphasized. Recommendations for evidence-based micro and macro level practice changes with the potential to improve the quality of CCP development and regulatory compliance are presented. Suggestions for future research are given.

Whakaora nga moemoea o nga tupuna--living the dreams of the ancestors. Future planning in a Kaupapa Māori CAMHS team.

Science.gov (United States)

Elder, Hinemoa; Milne, Moe; Witehira, Heemi; Mendes, Patrick; Heslin, Anneliese; Cribb-Su'a, Ainsleigh; Wilson, Riwai; Goldsmith, Arona; Kainamu, Reena; Barrett, Moana; Love, Shar; Cargo, Tania; Kalra, Vanitha

2009-08-01

The aim of this study was to identify and operationalize aspects of a future planning process for sustainable delivery of Kaupapa Māori (Specialist Māori) mental health from a team called He Kakano, within Child and Adolescent Mental Health Services in South Auckland, New Zealand. A 2-day hui (meeting) was held with members of the team and a facilitator, Whaea Moe Milne. Review of background national epidemiological data, local data, information from community, carer and tangata whaiora (consumer) stakeholders and the existing He Kakano Model of Care was undertaken. Use of tikanga (Māori protocol and practices) was evident throughout the hui. A number of aspects of tikanga were identified as essential to the positive outcomes of the future plan. This paper reports one in particular, that of whakatauakī (proverbs where the originator is known). "Whakaora nga moemoea o nga tupuna--living the dreams of the ancestors" is a whakatauakī articulated by Whaea Moe Milne, which was identified as helpful in influencing the strategic planning thinking and decision-making process for He Kakano. This whakatauakī enabled the identification of shared goals, values, beliefs, behaviours and an action plan. The existing and ongoing relationship with Whaea Moe Milne was identified as an important element in the way in which the whakatauakī was received and reflected on. Use of tikanga Māori, in this case, whakatauakī, was helpful in developing future planning for He Kakano. This suggests that use of tikanga may be beneficial in other settings where planning for sustainable Māori responsive services is undertaken. Further work in this area is likely to benefit service development, strategic planning, workforce development and have an impact on improving health outcomes for Māori.

Energy for our future : a plan for British Columbia progress to date

International Nuclear Information System (INIS)

Ostergaard, P.

2004-01-01

This PowerPoint presentation provided a brief overview of British Columbia's electric power system, the policies affecting it, the province's energy plans and support mechanisms to address issues and challenges. In British Columbia, 80 per cent of the electricity is primarily hydro based and is generated by BC Hydro, a public utility. The market structure is regulated and the electricity rates are based on cost of service. The BC market includes western North America with interconnections to Washington State and Alberta. The key issues and challenges facing the electricity sector in the province are meeting domestic demand; adopting clean competitive energy alternatives; export market access and downstream benefits; interest and exchange rates; firming, storage and shaping; transmission upgrades to an aging infrastructure; local governments and First Nations relationships and, permitting and approvals. The transmission system was reviewed with reference to trade with the Pacific Northwest, flexibility and storage. The province's future energy plans are based on low rates and public ownership, secure and reliable supply, more private sector opportunities, and environmental responsibility. figs

TH-C-12A-09: Planning and Delivery of the Fully Dynamic Trajectory Modulated Arc Therapy: Application to Accelerated Partial Breast Irradiation

International Nuclear Information System (INIS)

Liang, J; Atwood, T; Fahimian, B; Chin, E; Hristov, D; Otto, K

2014-01-01

Purpose: A novel trajectory modulated arc therapy (TMAT) system was developed that uses source motion trajectory involving synchronized gantry rotation with translational and rotational couch movement. MLC motion and dose rate were fully optimized for dynamic beam delivery. This work presents a platform for planning deliverable TMAT on a collision free coronal trajectory and evaluates its benefit for accelerated partial breast irradiation (APBI) in a prone position. Methods: The TMAT algorithm was built on VMAT with modifications (physical properties on couch movement were defined) and enhancements (pencil beam dose calculation engine to support extended SSDs) to make it feasible for TMAT delivery. A Matlab software environment for TMAT optimization and dose calculation was created to allow any user specified motion axis. TMAT delivery was implemented on Varian TrueBeamTM STx via XML scripts. 10 prone breast irradiation cases were evaluated in VMAT and compared with a 6- field non-coplanar IMRT plan. Patient selection/exclusion criteria and structure contouring followed the guidelines of NSABP B-39/RTOG 0413 protocol. Results: TMAT delivery time was ∼4.5 minutes. 251.5°±7.88° of non-isocentric couch arc was achieved by the optimized trajectory with 180– 210 control points at 1°–2° couch increments. The improved dose distribution by TMAT was most clearly observed by the marked reduction in the volume of irradiated normal breast tissue in the high dose region. The ratios of the normal breast tissue volume receiving more than 50%, 80% and 100% of the prescription dose for TMAT versus IMRT were: V50%(TMAT/IMRT) = 78.38%±13.03%, V80%(TMAT/IMRT) = 44.19%±9.04% and V100% (TMAT/IMRT) = 9.96%±7.55%, all p≤0.01. Conclusion: The study is the first demonstration of planning and delivery implementation of a fully dynamic APBI TMAT system with continuous couch motion. TMAT achieved significantly improved dosimetry over noncoplanar IMRT on dose volume parameters

TH-C-12A-09: Planning and Delivery of the Fully Dynamic Trajectory Modulated Arc Therapy: Application to Accelerated Partial Breast Irradiation

Energy Technology Data Exchange (ETDEWEB)

Liang, J; Atwood, T; Fahimian, B; Chin, E; Hristov, D [Department of Radiation Oncology, Stanford University, CA (United States); Otto, K [Department of Physics, University of British Columbia, BC (Canada)

2014-06-15

Purpose: A novel trajectory modulated arc therapy (TMAT) system was developed that uses source motion trajectory involving synchronized gantry rotation with translational and rotational couch movement. MLC motion and dose rate were fully optimized for dynamic beam delivery. This work presents a platform for planning deliverable TMAT on a collision free coronal trajectory and evaluates its benefit for accelerated partial breast irradiation (APBI) in a prone position. Methods: The TMAT algorithm was built on VMAT with modifications (physical properties on couch movement were defined) and enhancements (pencil beam dose calculation engine to support extended SSDs) to make it feasible for TMAT delivery. A Matlab software environment for TMAT optimization and dose calculation was created to allow any user specified motion axis. TMAT delivery was implemented on Varian TrueBeamTM STx via XML scripts. 10 prone breast irradiation cases were evaluated in VMAT and compared with a 6- field non-coplanar IMRT plan. Patient selection/exclusion criteria and structure contouring followed the guidelines of NSABP B-39/RTOG 0413 protocol. Results: TMAT delivery time was ∼4.5 minutes. 251.5°±7.88° of non-isocentric couch arc was achieved by the optimized trajectory with 180– 210 control points at 1°–2° couch increments. The improved dose distribution by TMAT was most clearly observed by the marked reduction in the volume of irradiated normal breast tissue in the high dose region. The ratios of the normal breast tissue volume receiving more than 50%, 80% and 100% of the prescription dose for TMAT versus IMRT were: V50%(TMAT/IMRT) = 78.38%±13.03%, V80%(TMAT/IMRT) = 44.19%±9.04% and V100% (TMAT/IMRT) = 9.96%±7.55%, all p≤0.01. Conclusion: The study is the first demonstration of planning and delivery implementation of a fully dynamic APBI TMAT system with continuous couch motion. TMAT achieved significantly improved dosimetry over noncoplanar IMRT on dose volume parameters

Sixth General Radioactive Waste Plan. Planning to the future of ENRESA

International Nuclear Information System (INIS)

Espejo Hernandez, J. M.

2006-01-01

The Government approved last June 23''rd the Sixth General Radioactive Waste Plan that presents the activities to be carried out by ENRESA in all its field of responsibility to the year 2070. The document considers as one of the principal changes that ENRESA will be restructured to corporate public entity assigned to the Ministry of Industry, Tourism and Trade as well as the need of a Centralised Temporary Storage for the spent fuel and the high level radioactive wastes generated in Spain. Nevertheless, information is provided on the plans for the full decommissioning of the nuclear power plants to complete their operational life and also the economic and financial aspects related to the activities contemplated in the Plan. (Author) 13 refs

Europe Unveils 20-Year Plan for Brilliant Future in Astronomy

Science.gov (United States)

2008-11-01

Astronomy is enjoying a golden age of fundamental, exciting discoveries. Europe is at the forefront, thanks to 50 years of progress in cooperation. To remain ahead over the next two to three decades, Europe must prioritise and coordinate the investment of its financial and human resources even more closely. The ASTRONET network, backed by the entire European scientific community, supported by the European Commission, and coordinated by the CNRS, today presents its Roadmap for a brilliant future for European astronomy. ESO's European Extremely Large Telescope is ranked as one of two top-priority large ground-based projects. Astronet and the E-ELT ESO PR Photo 43a/08 The E-ELT Europe is a leader in astronomy today, with the world's most successful optical observatory, ESO's Very Large Telescope, and cutting-edge facilities in radio astronomy and in space. In an unprecedented effort demonstrating the potential of European scientific cooperation, all of European astronomy is now joining forces to define the scientific challenges for the future and construct a common plan to address them in a cost-effective manner. In 2007, a top-level Science Vision was prepared to assess the most burning scientific questions over the next quarter century, ranging from dark energy to life on other planets. European astronomy now presents its Infrastructure Roadmap, a comprehensive 20-year plan to coordinate national and community investments to meet these challenges in a cost-effective manner. The Roadmap not only prioritises the necessary new frontline research facilities from radio telescopes to planetary probes, in space and on the ground, but also considers such key issues as existing facilities, human resources, ICT infrastructure, education and outreach, and cost -- of operations as well as construction. This bold new initiative -- ASTRONET -- was created by the major European funding agencies with support from the European Commission and is coordinated by the National Institute

An Approach to Evaluate Comprehensive Plan and Identify Priority Lands for Future Land Use Development to Conserve More Ecological Values

Directory of Open Access Journals (Sweden)

Long Zhou

2018-01-01

Full Text Available Urbanization has significant impacts on the regional environmental quality through altering natural lands, converting them to urban built-up areas. One common strategy applied by urban planners to manage urbanization and preserve natural resources is to make a comprehensive plan and concentrate future land use in certain areas. However, in practice, planners used to make future land use planning mainly based on their subjective interpretations with limited ecological supporting evidence and analysis. Here, we propose a new approach composed of ecological modelling and land use zoning in the spatial matrix to evaluate the comprehensive plan and identify priority lands for sustainable land use planning. We use the city of Corvallis, OR, as the test bed to demonstrate this new approach. The results indicate that the Corvallis Comprehensive Plan 1998–2020 featured with compact development is not performing efficiently in conserving ecological values, and the land use plan featured with mixed-use spreading development generated by the proposed approach meets the city’s land demands for urban growth, and conserves 103% more ecological value of retaining storm water nitrogen, 270% more ecological value of retaining storm water phosphorus and 19% more ecological value in storing carbon in the whole watershed. This study indicates that if planned with scientific analysis and evidence, spreading urban development does not necessarily result in less sustainable urban environment than the compact development recommended in smart growth.

Executive strategy plan for beneficial uses program: cesium-137 sewage sludge irradiation

International Nuclear Information System (INIS)

1981-07-01

Energy-efficient disinfection of sewage sludge, permitting its use as a fertilizer and soil conditioner in areas open to public access or on certain food chain crops, is possible using the process technology developed by Sandia National Laboratories under DOE and EPA joint support. This process accomplishes disinfection by gamma ray irradiation with cesium-137, a by-product isotope recovered from reprocessing of defense production waste. Disinfection with cesium-137 gamma irradiation provides an energy-efficient option for the Nation's cities to beneficially utilize sewage sludge, while at the same time conserving energy by utilizing a radioisotope, traditionally considered waste, in a beneficial manner. While the Sandia sludge irradiation technology has successfully completed its research and development phase, a major consideration remains: the introduction of a new technology into a marketplace which traditionally is skeptical of new products or process technologies until their performance is well proven. This document analyzes the factors important to market introduction of this new technology, develops options, and recommends a program strategy for transfer of the Sandia sludge irradiation technology to the marketplace by developing public awareness and acceptance, and by stimulating private sector commercialization interest

Current algorithms for computed electron beam dose planning

International Nuclear Information System (INIS)

Brahme, A.

1985-01-01

Two- and sometimes three-dimensional computer algorithms for electron beam irradiation are capable of taking all irregularities of the body cross-section and the properties of the various tissues into account. This is achieved by dividing the incoming broad beams into a number of narrow pencil beams, the penetration of which can be described by essentially one-dimensional formalisms. The constituent pencil beams are most often described by Gaussian, experimentally or theoretically derived distributions. The accuracy of different dose planning algorithms is discussed in some detail based on their ability to take the different physical interaction processes of high energy electrons into account. It is shown that those programs that take the deviations from the simple Gaussian model into account give the best agreement with experimental results. With such programs a dosimetric relative accuracy of about 5% is generally achieved except in the most complex inhomogeneity configurations. Finally, the present limitations and possible future developments of electron dose planning are discussed. (orig.)

Food Preservation by Irradiation. Vol. II. Proceedings of an International Symposium on Food Preservation by Irradiation

International Nuclear Information System (INIS)

1978-01-01

, as well as on the public health acceptability of a number of irradiated food items. These matters had been reported in WHO Technical Reports Series No.604, Wholesomeness of Irradiated Food, published in Geneva, 1977. (3) The Joint FAO/WHO Food Standards Programme, through the Codex Alimentarius, had examined food irradiation and developed a proposed General Standard on Irradiated Foods and a proposed Code of Practice for the Operation of Radiation Facilities used for the Treatment of Foods at step 5 of the 9-10 step procedure of the Codex. (4) FAO and the IAEA were about to join forces with the Government of the Netherlands in establishing an International Facility for Food Irradiation Technology at Wageningen for the purposes of technological and economic training and research in food irradiation. Sessions of the Symposium dealt with such topics as the control of animal infestation, toxicological studies, public health aspects and economics, and many papers were concerned with chemical changes in irradiated foods and with the control of microbial spoilage. The present Proceedings contain the papers given and the ensuing discussions, including the extensive round-table discussion on a plan of action for the future. The order of publication of the papers does not strictly follow that of presentation at the Symposium where, for technical reasons, it was not always possible to preserve the logical sequence. Viewed against the new developments recorded here, the outlook for the food irradiation community is encouraging, and the tasks ahead appear less formidable. The sponsoring organizations hope that the publication of this material will be a useful contribution towards accelerated progress in the practical application of food processing by irradiation

Food Preservation by Irradiation. Vol. I. Proceedings of an International Symposium on Food Preservation by Irradiation

International Nuclear Information System (INIS)

1978-01-01

studies, as well as on the public health acceptability of a number of irradiated food items. These matters had been reported in WHO Technical Reports Series No.604, Wholesomeness of Irradiated Food, published in Geneva, 1977. (3) The Joint FAO/WHO Food Standards Programme, through the Codex Alimentarius, had examined food irradiation and developed a proposed General Standard on Irradiated Foods and a proposed Code of Practice for the Operation of Radiation Facilities used for the Treatment of Foods at step 5 of the 9 - 10 step procedure of the Codex. (4) FAO and the IAEA were about to join forces with the Government of the Netherlands in establishing an International Facility for Food Irradiation Technology at Wageningen for the purposes of technological and economic training and research in food irradiation. Sessions o f the Symposium dealt with such topics as the control of animal infestation, toxicological studies, public health aspects and economics, and many papers were concerned with chemical changes in irradiated foods and with the control o f microbial spoilage. The present Proceedings contain the papers given and the ensuing discussions, including the extensive round-table discussion on a plan of action for the future. The order of publication of the papers does not strictly follow that of presentation at the Symposium where, for technical reasons, it was not always possible to preserve the logical sequence. Viewed against the new developments recorded here, the outlook for the food irradiation community is encouraging, and the tasks ahead appear less formidable. The sponsoring organizations hope that the publication of this material will be a useful contribution towards accelerated progress in the practical application of food processing by irradiation

The Role of Environmentally Conscious Architecture and Planning As Components of Future National Development Plans in Egypt

Directory of Open Access Journals (Sweden)

Karim M. Ayyad

2013-10-01

Full Text Available Egypt has been experiencing challenging economic, social and political disturbance during the end of the twentieth century and towards the beginning of the twenty-first. With its fast expanding population, high consumption rate and economic deficit, the Egyptian community continues to experience a low quality of living. These issues contributed greatly to the uprising, following the Tunisian model, in January, 2011. However, the political change that followed did not help a lot, as development strategies are still far from being sustainable. In the beginning of the millennium, Egypt experienced an 8.6% energy deficit, followed by a growing energy crisis [1]. Knowing that almost 50% of the energy produced in Egypt is consumed inside buildings [2], environmentally conscious architecture can be a very powerful tool in development plans, as it can reasonably reduce the consumption of energy and other resources and enhance the quality of living for people. This work analyzes the supposed role of environmentally conscious architecture and, hence, evaluates its importance as a major component of national development plans in the near future. The analysis encompasses a review of the status quo in terms of consumption patterns and required services and, then, compares it with the case in which environmentally conscious architecture is adopted.

The upgraded JRR-3 and future scope of its utilization

International Nuclear Information System (INIS)

Miyasaka, Yasuhiko; Umei, Hiroshi; Takahashi, Hidetake; Sakamoto, Masanobu

1985-10-01

At the time of start to construct the upgraded JRR-3, the present report describes general features on the upgraded JRR-3 and future scope of its utilization on the purpose of the mutual understanding with researchers who use the reactor and the utilization facilities. The materials edited in the report have been written by 28 reactor engineers and scientists in JAERI, and 35 scientists in universities. According to the reviewed subjects as shown below, it was confirmed that the upgraded JRR-3 would be extensively expected by much more fields. (1) Reactor and utilization facilities. 1. Plan and main features of the upgraded JRR-3, Reactor building 2. Irradiation facilities: Hydraulic rabbits, Pneumatic tubes, Rig Hot Cell, etc. 3. Neutron beam facilities: Horizontal tubes, Cold neutron source and Neutron guide tubes (2) Neutron beam experimental facilities. 1. Neutron diffractometer, neutron spectrometer, Small-angle neutron scattering, Neutron radiography, etc. (3) Recent trends. 1. Irradiation research of fuels and materials in research reactor 2. Activation analysis, Radioisotope, Neutron transmutation doping, etc. 3. Neutron scattering research. (author)

Food irradiation- status and future prospects in Indian context

International Nuclear Information System (INIS)

Thomas, Paul

1996-01-01

Research and development work on radiation processing of foods was started in India in the late 1950's realizing the immense potential of this technology in reducing the huge post-harvest losses occurring in agricultural, animal and fishery products. The major thrust of the efforts has been on the preservation and hygienisation of foods in its natural form. Results of the work carried out on food irradiation and allied areas are presented. 1 tab

Future care planning: a first step to palliative care for all patients with advanced heart disease.

Science.gov (United States)

Denvir, M A; Murray, S A; Boyd, K J

2015-07-01

Palliative care is recommended for patients with end-stage heart failure with several recent, randomised trials showing improvements in symptoms and quality of life and more studies underway. Future care planning provides a framework for discussing a range of palliative care problems with patients and their families. This approach can be introduced at any time during the patient's journey of care and ideally well in advance of end-of-life care. Future care planning is applicable to a wide range of patients with advanced heart disease and could be delivered systematically by cardiology teams at the time of an unplanned hospital admission, akin to cardiac rehabilitation for myocardial infarction. Integrating cardiology care and palliative care can benefit many patients with advanced heart disease at increased risk of death or hospitalisation. Larger, randomised trials are needed to assess the impact on patient outcomes and experiences. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Vanderbilt University Gamma Irradiation of Nano-modified Concrete (2017 Milestone Report)

Energy Technology Data Exchange (ETDEWEB)

Deichert, Geoffrey G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Linton, Kory D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Terrani, Kurt A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Selby, Aaron P. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Reches, Yonathan [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2017-08-01

This document outlines the irradiation of concrete specimens in the Gamma Irradiation Facility in the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory (ORNL). Two gamma irradiation runs were performed in July of 2017 on 18 reference mortar bar specimens, 26 reference cement paste bar specimens, and 28 reference cement paste tab specimens to determine the dose and temperature response of the specimens in the gamma irradiation environment. Specimens from the first two gamma irradiations were surveyed and released to Vanderbilt University. The temperature and dose information obtained informs the test parameters of the final two gamma irradiations of nano-modified concrete planned for FY 2018.

Collected charge and Lorentz angle measurement on non-irradiated ATLAS silicon micro-strip sensors for the HL-LHC

Energy Technology Data Exchange (ETDEWEB)

Yildirim, Eda

2017-02-15

In this thesis, the collected charge and the Lorentz angle on non-irradiated and the irradiated miniature of the current test silicon micro-strip sensors (ATLAS12) of the future ATLAS inner tracker are measured. The samples are irradiated up to 5 x 10{sup 15} 1 MeV n{sub eq}/cm{sup 2} and some of them also measured after short-term annealing (80 min at 60 C). The measurements are performed at the DESY II test beam, which provides the advantage of tracking to suppress noise hits. The collected charge is measured at various bias voltages for each sample. The results are compared with the measurements performed using a Sr{sup 90} radioactive source. It is shown that the measurements with beam and radioactive source are consistent with each other, and the advantage of tracking at the beam measurements provides the measurement of collected charge on highly irradiated sensors at lower bias voltages. The Lorentz angle is measured for each sample at different magnetic field strengths between 0 T and 1 T, the results are extrapolated to 2 T, which is the magnetic field in the inner tracker of the ATLAS detector. Most of the measurements are performed at -500 V bias voltage, which is the planned operation bias voltage of the future strip tracker. Some samples are also measured at different bias voltages to observe the effect of bias voltage on the Lorentz angle. The signal reconstruction of the strip sensors are performed using the lowest possible signal-to-noise thresholds. For non-irradiated samples, the measured Lorentz angle agrees with the prediction of the BFK model. On the irradiated samples, the results suggest that the Lorentz angle decreases with increasing bias voltage due to the increasing electric field in the sensor. The Lorentz angle decreases with increasing irradiation level; however, if the sample is under-depleted, the effect of electric field dominates and the Lorentz angle increases. Once the irradiation level becomes too high, hence the collected charge

78 FR 29655 - Connect America Fund; A National Broadband Plan for Our Future; Establishing Just and Reasonable...

Science.gov (United States)

2013-05-21

... Fund; A National Broadband Plan for Our Future; Establishing Just and Reasonable Rates for Local Exchange Carriers; High-Cost Universal Service Support AGENCY: Federal Communications Commission. ACTION.... Subpart D--Universal Service Support for High Cost Areas 0 2. In Sec. 54.313, revise paragraph (a)(9...

Monitoring pathogens from irradiated agriculture products

International Nuclear Information System (INIS)

Butterweck, J.S.

1990-01-01

The final food and environmental safety assessment of agriculture product irradiation can only be determined by product history. Product history will be used for future research and development, regulations, commercial practices and implementation of agriculture and food irradiation on a regional basis. The commercial irradiator treats large varieties and amounts of products that are used in various environments. it, in time, will generate a large data base of product history. Field product monitoring begins when food irradiation progresses from the pilot/demonstration phase to the commercial phase. At that time, it is important that there be in place a monitoring system to collect and analyze field data. The systems managers, public health authorities and exotic disease specialists will use this information to assess the reduction of food pathogens on the populace and the environment. (author)

National Energy Plan II

Energy Technology Data Exchange (ETDEWEB)

None

1979-01-01

This volume contains the Administration's second National Energy Plan, as required by section 801 of the Department of Energy Organization Act (Public Law 95-91). A second volume will contain an assessment of the environmental trends associated with the energy futures reported here. Detailed appendices to the Plan will be published separately. The eight chapters and their subtitles are: Crisis and Uncertainty in the World Energy Future (The Immediate Crisis and the Continuing Problem, The Emergence of the Energy Problem, The Uncertainties of the World Energy Future, World Oil Prices, Consequences for the U.S.); The U.S. Energy Future: The Implications for Policy (The Near-, Mid-, and Long-Term, The Strategy in Perspective); Conservation (Historical Changes in Energy Use, Post-Embargo Changes - In Detail, Conservation Policies and Programs, The Role of Conservation); Oil and Gas (Oil, Natural Gas); Coal and Nuclear (Coal, Nuclear, Policy for Coal and Nuclear Power); Solar and Other Inexhaustible Energy Sources (Solar Energy, Geothermal, Fusion, A Strategy for Inexhaustible Resources); Making Decisions Promptly and Fairly (Managing Future Energy Crises: Emergency Planning, Managing the Current Shortfall: The Iranian Response Plan, Managing the Long-Term Energy Problem: The Institutional Framework, Fairness in Energy Policy, Public Participation in the Development of Energy Policy); and NEP-II and the Future (The Second National Energy Plan and the Nation's Energy Future, The Second National Energy Plan and the Economy, Employment and Energy Policy, The Second National Energy Plan and Individuals, The Second National Energy Plan and Capital Markets, and The Second National Energy Plan and the Environment). (ERA citation 04:041097)

Assessing Future Flood Hazards for Adaptation Planning in a Northern European Coastal Community

DEFF Research Database (Denmark)

Sørensen, Carlo Sass; Broge, Niels H.; Molgaard, Mads R.

2016-01-01

From a transdisciplinary approach in the town of Thyboron, Denmark, we investigate couplings between sea state (i.e., mean and extreme) and flooding hazards today and ahead. This includes analyses of change and variability in the groundwater table, precipitation, land motion, geotechnical ground ......, and it will provide for more holistic solutions that both serve to protect the town and allow for business development and better municipal planning ahead....... properties, sewerage systems and other infrastructure to outline a more complete platform for the integration of knowledge into climate adaptation schemes at this highly vulnerable coastal location. It involves the engagement of the main stakeholders who, although having different responsibilities, interests......, needs of knowledge and data, and different timeframes for investment and planning, must join in a common appraisal of the challenges faced ahead to provide for better adaptation measures. Apart from obvious adverse effects from future storm surge events, knowledge about the coupled effects...

Post-irradiation handling and examination at the HFEF complex

International Nuclear Information System (INIS)

Bacca, J.P.

1980-01-01

The Hot Fuel Examination Facility provides postirradiation handling and examination of fast reactor irradiation experiments and safety tests for the United States Breeder Reactor Program. Nondestructive interim examinations and destructive terminal examinations at HFEF derive data from tests irradiated in the Experimental Breeder Reactor No. II, in the Transient Reactor Test Facility (TREAT), and in the Sodium Loop Safety Facility. Similar support will be provided in the near future for tests irradiated in the Fast Flux Test Facility, and for the larger sodium loops to be irradiated in TREAT

Planned Environmental Microbiology Aspects of Future Lunar and Mars Missions

Science.gov (United States)

Ott, C. Mark; Castro, Victoria A.; Pierson, Duane L.

2006-01-01

With the establishment of the Constellation Program, NASA has initiated efforts designed similar to the Apollo Program to return to the moon and subsequently travel to Mars. Early lunar sorties will take 4 crewmembers to the moon for 4 to 7 days. Later missions will increase in duration up to 6 months as a lunar habitat is constructed. These missions and vehicle designs are the forerunners of further missions destined for human exploration of Mars. Throughout the planning and design process, lessons learned from the International Space Station (ISS) and past programs will be implemented toward future exploration goals. The standards and requirements for these missions will vary depending on life support systems, mission duration, crew activities, and payloads. From a microbiological perspective, preventative measures will remain the primary techniques to mitigate microbial risk. Thus, most of the effort will focus on stringent preflight monitoring requirements and engineering controls designed into the vehicle, such as HEPA air filters. Due to volume constraints in the CEV, in-flight monitoring will be limited for short-duration missions to the measurement of biocide concentration for water potability. Once long-duration habitation begins on the lunar surface, a more extensive environmental monitoring plan will be initiated. However, limited in-flight volume constraints and the inability to return samples to Earth will increase the need for crew capabilities in determining the nature of contamination problems and method of remediation. In addition, limited shelf life of current monitoring hardware consumables and limited capabilities to dispose of biohazardous trash will drive flight hardware toward non-culture based methodologies, such as hardware that rapidly distinguishes biotic versus abiotic surface contamination. As missions progress to Mars, environmental systems will depend heavily on regeneration of air and water and biological waste remediation and

Does reading scenarios of future land use changes affect willingness to participate in land use planning?

Science.gov (United States)

Michelle L. Johnson; Kathleen P. Bell; Mario F. Teisl

2016-01-01

Scenarios of future outcomes often provide context for policy decisions and can be a form of science communication, translating complex and uncertain relationships into stories for a broader audience. We conducted a survey experiment (n = 270) to test the effects of reading land use change scenarios on willingness to participate in land use planning activities. In the...

Demographic development, climatic change, peak oil. Answers to spatial planning, urban planning and traffic planning; Demografische Entwicklung, Klimawandel, Peak Oil. Antworten der Raum-, Stadt- und Verkehrsplanung

Energy Technology Data Exchange (ETDEWEB)

Huber, Felix

2011-07-01

The demographic trends, climate change and peak oil are highly sensitive issues politically. With fears about the future and the curiosity on the future attention can be aroused. Therefore, the author of the contribution under consideration reports on the following aspects: (1) Why should we deal with future challenges?; (2) Presentation of the tools of spatial planning, urban planning and transportation planning in the context of the particular requirements of their time; (3) Clarification of the requirements to future tools; (4) Presentation of the future tasks of spatial planning and the changes in lifestyle.

Performance of the ATLAS Liquid Argon Calorimeter After Three Years of LHC Operation and Plans for a Future Upgrade

CERN Document Server

Ilic, N; The ATLAS collaboration

2013-01-01

Performance of the Liquid Argon Calorimeter during three years of LHC operation is presented. Upgrades and plans for future upgrades in order to prepare the LAr calorimeter for higher luminosity are presented.

Treatment planning for heavy ion irradiation. Pt. 1

International Nuclear Information System (INIS)

Jaekel, O.

1997-01-01

In this contribution we will outline briefly the GSI beam delivery system and the qualitative differences in the methods used for inverse planning arising from it. We will describe the planning package, consisting of VOXELPLAN and TRiP and show some results for first test cases. (orig./MG)

Treatment planning for heavy ion irradiation. Pt. 1

Energy Technology Data Exchange (ETDEWEB)

Jaekel, O [Deutsches Krebsforschungszentrum, Heidelberg (Germany). FS Radiologische Diagnostik und Therapie; Kraemer, M [Gesellschaft fuer Schwerionenforschung (GSI), Biophysik, Darmstadt (Germany)

1997-09-01

In this contribution we will outline briefly the GSI beam delivery system and the qualitative differences in the methods used for inverse planning arising from it. We will describe the planning package, consisting of VOXELPLAN and TRiP and show some results for first test cases. (orig./MG)

Integrated irradiation and cystectomy for bladder cancer

International Nuclear Information System (INIS)

Whitmore, W.F. Jr.

1980-01-01

Planned pre-operative irradiation and cystectomy for selected patients with bladder cancer was initiated approximately 20 years ago by a number of centres on the basis of the disappointing end results of treatment of bladder cancer by either irradiation or surgery and the empirical hope that the combination might lead to better results. This is a brief review of the logical basis for integrated treatment and of the Memorial Sloan-Kettering Cancer Center (MSKCC) experience with such therapy. (author)

Future plan of ITER

International Nuclear Information System (INIS)

Kitsunezaki, Akio

1998-01-01

In cooperation of four countries, Japan, USA, EU and Russia, ITER plan has been proceeding as ''the conceptual design activities'' from 1988 to 1990 and ''the industrial design activities'' since 1992. To construct ITER, the legal and work side of ITER operation has been investigated by four countries. However, their economic conditions have been changed to be wrong. So that, construction of ITER can not begin after end of industrial design activities in 1998. Accordingly, they determined to continue the industrial design activities more three years in order to study low cost options and to test the superconductive model·coil. (S.Y.)

Whole abdominal irradiation following chemotherapy in advanced ovarian carcinoma

International Nuclear Information System (INIS)

Kuten, A.; Stein, M.; Steiner, M.; Rubinov, R.; Epelbaum, R.; Cohen, Y.

1988-01-01

One hundred and sixteen patients with advanced ovarian carcinoma, who underwent primary cytoreductive surgery, received 6-11 courses of chemotherapy by cis-platin (50 mg/m2) and adriamycin (50 mg/m2) every 21 days. This was followed by second look laparotomy in 66 patients with no clinical evidence of disease. Consolidation abdominal irradiation was administered to 43 patients. Two techniques of irradiation were employed: between 1980-1983 whole abdominal irradiation was used and patients were to receive 3000 cGy in 4 weeks (Schedule I). Due to myelosuppression only 13 of 26 patients (50%) completed the planned dose of radiation. Between 1983-1985 the target volume was divided into upper and lower parts. First, the lower abdomen received 3000 cGy in 3 weeks, and then the upper abdomen received the same dose (Schedule II). Sixteen of seventeen patients (94%) thus treated, completed the planned dose of radiation. The actuarial survival for all 116 patients was 28% of 5 years. Irradiated patients with negative second look laparotomy had a survival probability of 100% at 24 months. Irradiated patients with microscopic disease at second look operation had an actuarial 5-year survival of 66%. Patients with minimal residual disease at second look laparotomy, receiving consolidation abdominal irradiation, had an actuarial survival of 5% only at 36 months. It is concluded that consolidation radiotherapy is effective in patients with negative or microscopic residual disease at second-look laparotomy. In regard to bone marrow tolerance, split field technique of irradiation is preferred

Status of MAD (version 8.5) and future plans

International Nuclear Information System (INIS)

Iselin, F.C.

1993-01-01

The MAD computer code project was started in 1981 at the European Organization for Nuclear Research (CERN) to provide a flexible framework for particle optical computations. From the beginning various features were considered important. Open-ended and modular design of the program would allow easy addition of new features. Format-free input language would facilitate data preparation. Later the requirement was added that the language should be understood by a variety of other programs. When moving data to other programs this would avoid extensive translations of the data with the corresponding danger of making errors. The internal data structure would describe the machine in a flexible manner and access to this structure should be simple. The program should be easy to maintain. Canonical variables should be used throughout the computations. All these features should not hamper the computational efficiency. This article describes the features of the MAD code. This is followed by two sections giving a general description of the ''standard input language'' and extensions to this language. Finally the data structures introduced and future plans are summarized. (Author)

Trial study on design of irradiated fields of radiotherapy in cervical and upper thoracic esophageal cancer

International Nuclear Information System (INIS)

Liu Hui; Zeng Zhifan; Cui Nianji; He Zhichun; Huang Shaomin

2006-01-01

Objective: To compare three kinds of irradiation treatment plans for cervical and upper thoracic esophageal cancer, in order to arrived at proper decision for the patient. Methods: From February 2001 to June 2004, 43 such patients were studied with three different simulated treatment plans made including conformal plan, conventional four-field plan and conventional two-field plan for every one. All plans were evaluated with iso- dose curve and dose-volume histogram. Results: GTV on 95% isodose curve was 99.5%, 98.2% and 87.4% in conformal plan, conventional four-field plan and conventional two-field plan, respectively; PTV 1 and PTV 2 on 95% isodose with 97.8%, 97.2%, 94.8% and 95.8%, 86.6%, 73.7%. The volume of > 20 Gy dose of left lung accepted was 18.6%, 17.2% and 32.3%, in conformal plan, conventional four-field plan and conventional two-field plan, respectively; the right lung received 20.5% ,19.9% and 35.5%. Conclusions: Conformal plan is the best in radiotherapy, as it can provide ideal dose distribution of irradiated target with adequate protection of the normal tissues. Conventional four-field plan, being easy to carry, out, can replace the conformal plan in most situations. Conventional two-field has the most uneven dose distribution and largest lung volume irradiated. (authors)

Simultaneous application of high energy electron and photon beams in the radiotherapy of malignant tumours: problems of clinical irradiation-planning

International Nuclear Information System (INIS)

Petranyi, J.

1980-01-01

The aim of the work was to elaborate a new procedure of radiotherapy of neoplasms of the head and neck, fulfilling the following requirements: 1. the dose-maximum should be 1-6 cm below the skin, 2. in the tumour-volume the dose-decrease should not exceed 10%, 3. towards the environment the dose should sharply decrease so that the radiation burden of the healthy tissues should not exceed their tolerance. These criteria were met by the simultaneous application of 5-25 MeV energy electron beam (produced by B5M25 Betatron) and 29 MeV Bremsstrahlung or by the latter plus 60 Co gamma-radiation. In the case of irradiation of inhomogeneous tissues only the combination of the high energy photon radiations was successfull. The alteration of the ratio and/or the energy of the components results in the change of the maximal dose point. The thesis provides irradiation-plans for radiotherapy of unilateral cerebral, oral and sinus maxillaris tumours and cervical, supra- and infraclavicular and axillary lymph nodes. (L.E.)

Fusion Materials Irradiation Test Facility: experimental capabilities and test matrix

International Nuclear Information System (INIS)

Opperman, E.K.

1982-01-01

This report describes the experimental capabilities of the Fusion Materials Irradiation Test Facility (FMIT) and reference material specimen test matrices. The description of the experimental capabilities and the test matrices has been updated to match the current single test cell facility ad assessed experimenter needs. Sufficient detail has been provided so that the user can plan irradiation experiments and conceptual hardware. The types of experiments, irradiation environment and support services that will be available in FMIT are discussed

Technology Implementation Plan

DEFF Research Database (Denmark)

Jensen, Karsten Ingerslev; Schultz, Jørgen Munthe

The Technology Implementation Plan (TIP) describes the main project results and the intended future use. The TIP is confidential.......The Technology Implementation Plan (TIP) describes the main project results and the intended future use. The TIP is confidential....

Food irradiation in Malaysia

International Nuclear Information System (INIS)

Mohd Ghazali Hj Abd Rahman.

1985-01-01

Food irradiation has recently been visited as a technology that can contribute to the solution of problems associated with food preservation of Malaysia's agriculture produce and products thereby improving the economic status of the rural sector. However, the history of food irradiation in Malaysia is very recent. Research carried out on food irradiation only began in 1974 as a result of the installation of a 60 Co facility (initially 10,000 Ci) at the National University of Malaysia. Since its installation several studies have been carried out pertaining to the food irradiation. Presently its development has been slow. Research in this area has been confined to laboratory scale and purely academic. This limitation is due to a number of reasons, among others are: a) limited number of facilities; b) lack of expertise to conduct its research; c) other preservation methods can be improved with lower capital output. An important step towards its development was made when Malaysia actively participated in the RCA/IAEA food irradiation project, viz. the irradiation of pepper which was carried out at the National University of Malaysia in the 80's. As a result of this venture, research and development activities in food irradiation have been geared toward semi-plot scale with the view ot commercialization in the future. In 1982, a group of researchers was formed to conduct feasibility studies using irradiation techniques in trying to overcome several problems associated with our local paddy and rice. Another group is being organized by the National University of Malaysia to look into the problems associated with the preservation of frozen shrimps. (author)

Irradiation of laboratory animal diets

International Nuclear Information System (INIS)

Adamiker, D.

1976-01-01

The increasing demand for well-defined, standardized laboratory animals fr use in experimental research has led to the development of many new methods aimed at keeping the animals free of pathogenic micro-organisms. In this respect the problem of contaminated feeds has become more and more widely recognized. Chemial treatments and heat-treatments, which are the methods most commonly used at present, do have many disadvantages and this has led to an increasing interest in the application of irradiation for sterilizing animal feeds. The author reviews in some detail the various feeding studies which have been performed to date to establish whether or not irradiated feeds are safe for consumption. Much attention is now being given to feed irradiation throughout the world; it is estimated, for example, that approximately 700 tons of feed are already being irradiated per year and that this amount is likely to increase steadily in the future. These activities and recent developments are also briefly reviewed. (author)

IMRT and 3D conformal radiotherapy with or without elective nodal irradiation in locally advanced NSCLC. A direct comparison of PET-based treatment planning

International Nuclear Information System (INIS)

Fleckenstein, Jochen; Kremp, Katharina; Kremp, Stephanie; Palm, Jan; Ruebe, Christian

2016-01-01

The potential of intensity-modulated radiation therapy (IMRT) as opposed to three-dimensional conformal radiotherapy (3D-CRT) is analyzed for two different concepts of fluorodeoxyglucose positron emission tomography (FDG PET)-based target volume delineation in locally advanced non-small cell lung cancer (LA-NSCLC): involved-field radiotherapy (IF-RT) vs. elective nodal irradiation (ENI). Treatment planning was performed for 41 patients with LA-NSCLC, using four different planning approaches (3D-CRT-IF, 3D-CRT-ENI, IMRT-IF, IMRT-ENI). ENI included a boost irradiation after 50 Gy. For each plan, maximum dose escalation was calculated based on prespecified normal tissue constraints. The maximum prescription dose (PD), tumor control probability (TCP), conformal indices (CI), and normal tissue complication probabilities (NTCP) were analyzed. IMRT resulted in statistically significant higher prescription doses for both target volume concepts as compared with 3D-CRT (ENI: 68.4 vs. 60.9 Gy, p < 0.001; IF: 74.3 vs. 70.1 Gy, p < 0.03). With IMRT-IF, a PD of at least 66 Gy was achieved for 95 % of all plans. For IF as compared with ENI, there was a considerable theoretical increase in TCP (IMRT: 27.3 vs. 17.7 %, p < 0.00001; 3D-CRT: 20.2 vs. 9.9 %, p < 0.00001). The esophageal NTCP showed a particularly good sparing with IMRT vs. 3D-CRT (ENI: 12.3 vs. 30.9 % p < 0.0001; IF: 15.9 vs. 24.1 %; p < 0.001). The IMRT technique and IF target volume delineation allow a significant dose escalation and an increase in TCP. IMRT results in an improved sparing of OARs as compared with 3D-CRT at equivalent dose levels. (orig.) [de

A treatment planning study comparing whole breast radiation therapy against conformal, IMRT and tomotherapy for accelerated partial breast irradiation

International Nuclear Information System (INIS)

Oliver, Mike; Chen, Jeff; Wong, Eugene; Van Dyk, Jake; Perera, Francisco

2007-01-01

Purpose and background: Conventional early breast cancer treatment consists of a lumpectomy followed by whole breast radiation therapy. Accelerated partial breast irradiation (APBI) is an investigational approach to post-lumpectomy radiation for early breast cancer. The purpose of this study is to compare four external beam APBI techniques, including tomotherapy, with conventional whole breast irradiation for their radiation conformity index, dose homogeneity index, and dose to organs at risk. Methods and materials: Small-field tangents, three-dimensional conformal radiation therapy, intensity-modulated radiation therapy and helical tomotherapy were compared for each of 15 patients (7 right, 8 left). One radiation conformity and two dose homogeneity indices were used to evaluate the dose to the target. The mean dose to organs at risk was also evaluated. Results: All proposed APBI techniques improved the conformity index significantly over whole breast tangents while maintaining dose homogeneity and without a significant increase in dose to organs at risk. Conclusion: The four-field IMRT plan produced the best dosimetric results; however this technique would require appropriate respiratory motion management. An alternative would be to use a four-field conformal technique that is less sensitive to the effects of respiratory motion

Wholesomeness studies on irradiated foods - past and future research within the Soviet Union

International Nuclear Information System (INIS)

Zaytsev, A.N.; Shillinger, Y.; Shillinger, I.; Kamaldinova, Z.M.

1975-01-01

The important question to what extent ionizing radiation can be used for the storage and keeping of food without having to reckon for the corresponding radiation damage within such food chains is investigated in a review article. The study is based on manifold investigations which were carried out in the USSR. Many investigations of germ and growth modifications after irradiation, sterilization and metabolic behaviour of the essential components like vitamins, proteins and carbohydrates of the irradiated food were performed, and the question of the still permissible radiation dose was discussed. The results show that the application of ionizing radiation for food storage is superior to the conservative methods. This, of course, is only valid for certain radiation doses whose application does not give rise to any toxic side-effects or negative influences of the irradiated food components regarding tolerance to human health. (GSE/LH) [de

Coordinated irradiation plan for the Fuel Refabrication and Development Program

International Nuclear Information System (INIS)

Barner, J.O.

1979-04-01

The Department of Energy's Fuel Refabrication and Development (FRAD) Program is developing a number of proliferation-resistant fuel systems and forms for alternative use in nuclear reactors. A major portion of the program is the development of irradiation behavioral information for the fuel system/forms with the ultimate objective of qualifying the design for licensing and commercial utilization. The nuclear fuel systems under development include denatured thoria--urania fuels and spiked urania--plutonia or thoria--plutonia fuels. The fuel forms being considered include pellet fuel produced from mechanically mixed or coprecipitated feed materials, pellet fuel fabricated from partially calcined gel-derived or freeze-dried spheres (hybrid fuel) and packed-particle fuel produced from sintered gel-derived spheres (sphere-pac). This document describes the coordinated development program that will be used to test and demonstrate the irradiation performance of alternative fuels

Neural-network analysis of irradiation hardening in low-activation steels

Energy Technology Data Exchange (ETDEWEB)

Kemp, R. [Department of Materials Science and Metallurgy, University of Cambridge, Pembroke Street, Cambridge CB2 3QZ, UK (United Kingdom)]. E-mail: rk237@cam.ac.uk; Cottrell, G.A. [EURATOM/UKAEA Fusion Association, Culham Science Centre, Abingdon, Oxon OX14 3DB, UK (United Kingdom); Bhadeshia, H.K.D.H. [Department of Materials Science and Metallurgy, University of Cambridge, Pembroke Street, Cambridge CB2 3QZ, UK (United Kingdom); Odette, G.R. [Department of Mechanical and Environmental Engineering and Department of Materials, University of California Santa Barbara, Santa Barbara, CA 93106 (United States); Yamamoto, T. [Department of Mechanical and Environmental Engineering and Department of Materials, University of California Santa Barbara, Santa Barbara, CA 93106 (United States); Kishimoto, H. [Department of Mechanical and Environmental Engineering and Department of Materials, University of California Santa Barbara, Santa Barbara, CA 93106 (United States)

2006-02-01

An artificial neural network has been used to model the irradiation hardening of low-activation ferritic/martensitic steels. The data used to create the model span a range of displacement damage of 0-90 dpa, within a temperature range of 273-973 K and contain 1800 points. The trained model has been able to capture the non-linear dependence of yield strength on the chemical composition and irradiation parameters. The ability of the model to generalise on unseen data has been tested and regions within the input domain that are sparsely populated have been identified. These are the regions where future experiments could be focused. It is shown that this method of analysis, because of its ability to capture complex relationships between the many variables, could help in the design of maximally informative experiments on materials in future irradiation test facilities. This will accelerate the acquisition of the key missing knowledge to assist the materials choices in a future fusion power plant.

Patient preferences for future care - how can Advance Care Planning become embedded into dementia care: a study protocol

OpenAIRE

Robinson, Louise; Bamford, Claire; Beyer, Fiona; Clark, Alexa; Dickinson, Claire; Emmet, Charlotte; Exley, Catherine; Hughes, Julian; Robson, Lesley; Rousseau, Nikki

2010-01-01

Abstract Background People living with a long term condition may wish to be able to plan ahead, so that if in future they cannot make decisions, their wishes about their care will be known; this process is termed Advance Care Planning (ACP). In dementia, guidance stipulates that ACP discussions should take place whilst the person still has capacity to make decisions. However there is a lack of evidence on the effectiveness of ACP in influencing patient choice and resource use. The aims of thi...

RSG-GAS. Current and strategic plan of future activities

Energy Technology Data Exchange (ETDEWEB)

Antariksawan, Anhar R; Tarigan, A [National Nuclear Energy Agency of Indonesia (BATAN), Jakarta (Indonesia)

2012-03-15

The Multi Purpose Reactor G.A. Siwabessy, so-called RSG-GAS, is the third research reactor built in Indonesia and operated by National Nuclear Energy of Indonesia (BATAN). This MTR type reactor achieved its first criticality in July 1987. Since then it has been operated about 77.300 hours. It uses LEU fuel in the form of U{sub 3}O{sub 8}-Al at the beginning, but then converted to silicide fuel, U{sub 3}Si{sub 2}-Al by a density of 2.96 g/cm{sup 3} preserving its nominal power of 30 MW and average flux of 2.5x10{sup 14} n/cm{sup 2} sec. In the last two years the reactor is operated more than 3.500 hours per year. Several equipments have been refurbished due to ageing. The reactor is operated mainly for serving radioisotopes production, neutron activation analysis (NAA), neutron beam experiments and general irradiation for research and development activities. The future activities of the RSG-GAS reactor will be prioritized first on increasing the reliability and availability of the reactor operation to assure the fulfillment of the demand of the isotope production, along with the improvement of neutron beam instruments and NAA facilities to increase its utilization. In this context, the collaboration in the utilization of RSG-GAS for many application with the countries in the region is also expected. The human resource development for the new recruited RSG-GAS staff is also a challenge and become a priority. (author)

SU-E-T-492: Implementing a Method for Brain Irradiation in Rats Utilizing a Commercially Available Radiosurgery Irradiator

International Nuclear Information System (INIS)

Cates, J; Drzymala, R

2014-01-01

Purpose: The purpose of the study was to implement a method for accurate rat brain irradiation using the Gamma Knife Perfexion unit. The system needed to be repeatable, efficient, and dosimetrically and spatially accurate. Methods: A platform (“rat holder”) was made such that it is attachable to the Leskell Gamma Knife G Frame. The rat holder utilizes two ear bars contacting bony anatomy and a front tooth bar to secure the rat. The rat holder fits inside of the Leskell localizer box, which utilizes fiducial markers to register with the GammaPlan planning system. This method allows for accurate, repeatable setup.A cylindrical phantom was made so that film can be placed axially in the phantom. We then acquired CT image sets of the rat holder and localizer box with both a rat and the phantom. Three treatment plans were created: a plan on the rat CT dataset, a phantom plan with the same prescription dose as the rat plan, and a phantom plan with the same delivery time as the rat plan. Results: Film analysis from the phantom showed that our setup is spatially accurate and repeatable. It is also dosimetrically accurate, with an difference between predicted and measured dose of 2.9%. Film analysis with prescription dose equal between rat and phantom plans showed a difference of 3.8%, showing that our phantom is a good representation of the rat for dosimetry purposes, allowing for +/- 3mm diameter variation. Film analysis with treatment time equal showed an error of 2.6%, which means we can deliver a prescription dose within 3% accuracy. Conclusion: Our method for irradiation of rat brain has been shown to be repeatable, efficient, and accurate, both dosimetrically and spatially. We can treat a large number of rats efficiently while delivering prescription doses within 3% at millimeter level accuracy

A national survey of residents in combined Internal Medicine and Dermatology residency programs: educational experience and future plans.

Science.gov (United States)

Mostaghimi, Arash; Wanat, Karolyn; Crotty, Bradley H; Rosenbach, Misha

2015-10-16

In response to a perceived erosion of medical dermatology, combined internal medicine and dermatology programs (med/derm) programs have been developed that aim to train dermatologists who take care of medically complex patients. Despite the investment in these programs, there is currently no data with regards to the potential impact of these trainees on the dermatology workforce. To determine the experiences, motivations, and future plans of residents in combined med/derm residency programs. We surveyed residents at all United States institutions with both categorical and combined training programs in spring of 2012. Respondents used visual analog scales to rate clinical interests, self-assessed competency, career plans, and challenges. The primary study outcomes were comfort in taking care of patients with complex disease, future practice plans, and experience during residency. Twenty-eight of 31 med/derm residents (87.5%) and 28 of 91 (31%) categorical residents responded (overall response rate 46%). No significant differences were seen in self-assessed dermatology competency, or comfort in performing inpatient consultations, cosmetic procedures, or prescribing systemic agents. A trend toward less comfort in general dermatology was seen among med/derm residents. Med/derm residents were more likely to indicate career preferences for performing inpatient consultation and taking care of medically complex patients. Categorical residents rated their programs and experiences more highly. Med/derm residents have stronger interests in serving medically complex patients. Categorical residents are more likely to have a positive experience during residency. Future work will be needed to ascertain career choices among graduates once data are available.

Food Irradiation Newsletter. V. 14, no. 1

International Nuclear Information System (INIS)

1990-05-01

This issue reports activities of the ICGFI, especially the excerpts of its 6th Annual Meeting held in Vienna in October 1989. The Action Plan of the ICGFI Inter-American Meeting on Harmonization of Regulations Related to Trade in Irradiated Foods, held in Orlando, Florida last year, is also included. The conclusions of the three co-ordinated research programme organized by the Food Preservation Section during 1989 are reported and a survey of market testings of irradiated food carried out in different countries in the past 5 years is described. A supplement gives an up-dated list of clearance of irradiated foods based on information received from various countries. Refs, 1 fig., tabs

Planning for the future : the role of mobility in residential and lifestyle choices of baby boomers and older adults.

Science.gov (United States)

2013-06-01

This study explores the extent to which Baby Boomers and older adults take mobility and : transportation issues into consideration as they make individual residential and lifestyle plans for : their future older years. While transportation and urban ...

Future proton and mixed-field irradiation facilities with slow extraction for LHC operation phase and for LHC upgrades

CERN Document Server

Assmann, Ralph Wolfgang; Brugger, Markus; Efthymiopoulos, Ilias; Feldbaumer, Eduard; Garrido, Mar Capeans; Glaser, Maurice; Kramer, Daniel; Linssen, Lucie; Losito, Roberto; Moll, Michael; Rembser, Christoph; Silari, Marco; Thurel, Yves; Tsesmelis, Emmanuel; Vincke, Helmut; CERN. Geneva. The LHC experiments Committee; LHCC

2010-01-01

In the present proposal we present the need for improved proton and mixed-field irradiation facilities with slow beam extraction at CERN. Strong needs are expressed by both the detector and accelerator communities and concern the LHC operation era as well as the upgrades of machine and experiments. The current facilities and test areas have a number of limitations and drawbacks. Preliminary studies indicate that there are possibilities for a coherent and cost-effective approach towards improved facilities for the future. The aim of this document is to inform the LHCC and seek its recognition for the need of such facilities. In addition we would appreciate the support of the LHCC for pursuing further implementation studies at a PS East Hall location.

Strategic planning for marketers.

Science.gov (United States)

Wilson, I

1978-12-01

The merits of strategic planning as a marketing tool are discussed in this article which takes the view that although marketers claim to be future-oriented, they focus too little attention on long-term planning and forecasting. Strategic planning, as defined by these authors, usually encompasses periods of between five and twenty-five years and places less emphasis on the past as an absolute predictor of the future. It takes a more probabilistic view of the future than conventional marketing strategy and looks at the corporation as but one component interacting with the total environment. Inputs are examined in terms of environmental, social, political, technological and economic importance. Because of its futuristic orientation, an important tenant of strategic planning is the preparation of several alternative scenarios ranging from most to least likely. By planning for a wide-range of future market conditions, a corporation is more able to be flexible by anticipating the course of future events, and is less likely to become a captive reactor--as the authors believe is now the case. An example of strategic planning at General Elecric is cited.

Latest experiences and future plans on NSLS-II insertion devices

Energy Technology Data Exchange (ETDEWEB)

Tanabe, T.; Hidaka, Y.; Kitegi, C.; Hidas, D.; Musardo, M.; Harder, D. A.; Rank, J.; Cappadoro, P.; Fernandes, H.; Corwin, T. [Energy Sciences Directorate, Brookhaven National Laboratory, Upton, NY 11973, U.S.A (United States)

2016-07-27

National Synchrotron Light Source-II (NSLS-II) is the latest storage ring of 3 GeV energy at the Brookhaven National Laboratory (BNL). The horizontal emittance of the electron beam with the currently installed six damping wigglers is 0.9 nm.rad, which could be further reduced to 0.5 nm.rad with more insertion devices (IDs). With only one RF cavity the beam current is restricted to 200 mA. Five hundred mA operation is envisaged for next year with an addition of the second cavity. Six (plus two branches) beamlines have been commissioned in the initial phase of the project. In July 2015, three NIH funded beamlines called “Advanced Beamlines for Biological Investigations with X-rays” (ABBIX) will be added for operation. This paper describes the experiences of ID development, installation, and commissioning for the NSLS-II project as well as our future plans to improve the performance of the facility in terms of source development.

Results of wholesomeness test on basic plan of research and development of food irradiation (7 items)

International Nuclear Information System (INIS)

Furuya, Tsuyoshi

1989-01-01

Twenty years have elapsed since the general research on food irradiation was begun in Japan as the new technology for food preservation, and the research on the wholesomeness of irradiated foods has been carried out in wide range together with the research on irradiation effect, irradiation techniques and economical efficiency. The wholesomeness of irradiated foods includes chronic toxicity including carcinogenic property in the continuous intake for long period, the effect to reproduction function over many generations and the possibility of giving hereditary injury to cells, the nutritional adequacy required for the sustenance of life and the increase of health, and microbiological safety. In Japan, the research on food irradiation was designated as an atomic energy specific general research, and as the objects of research, potato and onion for the prevention of germination, rice and wheat for the protection from noxious insects, fish paste products, wienerwurst and mandarin orange for sterilization were selected. For the irradiation, Co-60 gamma ray was used except the case of mandarin orange using electron beam. The research on all 7 items was finished, and the irradiation of potato was permitted. (K.I.)

A data recording and processing system for examination of irradiated fuel rods

International Nuclear Information System (INIS)

Olshausen, K.D.; Christiansen, J.F.; Larsen, J.K.; Stevens, T.

1978-03-01

Over the past eight years a system has been developed at Institutt for atomenergi, Kjeller, Norway, which helps to collect and analyze data obtained during certain post-irradiation examination techniques employed at IFA's Hot Laboratory. At present computer codes are in use for treating results from: profilometry, gamma scanning, eddy current testing and tensile testing. The system is easily adaptable to any othermeasuring data with the structure: -axial position, time interval etc.; signal A (DC-voltage, counts); signal B (DC-voltage, counts). Anextention of the system for transverse gamma scanning and gap measurement (mechanical compression method) is planned for the future. The various programmes in the system are described and examples of the outputs are given in a series of appendices. (JIW)

Food irradiation comes back to foreground; L'irradiation des aliments revient au premier plan

Energy Technology Data Exchange (ETDEWEB)

Deroin, Ph

2008-06-15

The American agriculture with its vegetables with green leaves which it is very difficult to free of pathogenic elements as E.coli could reconsider the use of the irradiation which allows to eliminate 99,9 % of the pathogenic in the mass; to consolidate this use the works of the IAEA, the FAO, the Fda and the Who confirmed its utility and its harmlessness. (N.C.)

Status of food irradiation in Brazil

International Nuclear Information System (INIS)

Kikuchi, O.K.

1996-01-01

Research on food irradiation in Brazil started in 1968 at the Center of Nuclear Energy for Agriculture (CENA), Piracicaba, Sao Paulo. At the Institute of Nuclear and Energy Research (IPEN-CNEN/SP), Sao Paulo, Sao Paulo, research on detection of irradiated foods is in progress. In 1973, the Brazilian government established a regulation about food irradiation. Nowadays, the products authorized to be irradiated are: rice, poultry, fish and fish products, potatoes, onions, avocados, persimmons, pineapples, wheat flour, maize, beans, spices, tomatoes, guavas, oranges, lemons, strawberries, mangoes, melons and papayas. The other recommended products to be approved in the future are: acerolas, apples, beans (dose > 1 kGy), beef, blueberries, cherries, cheeses, coffee, figs, fresh guaranas, garlics, grapefruits, grapes, mushrooms, nuts and pork. Today, there is only one commercial facility for irradiation services in the country, the Empresa Brasileira de Radiacoes Ltda. (EMBRARAD). This company operates a Nordion JS-7500 irradiator, with a present activity of about 1,000 kCi, designed for sterilizing medical devices. It also irradiates spices, dried foods, gemstones, cosmetics, wood and raw materials for pharmaceuticals. The plant operates 24 hours a day and the spices and dried foods represent 15% of the business. Powder of guarana seeds is irradiated also for exportation. There are two other commercial facilities for radiation sterilization in Brazil, operating exclusively for their own production. (J.P.N.)

Development of irradiation technique on controlling food contamination residue

International Nuclear Information System (INIS)

Liu Bin; Xiong Shanbai; Xiong Guangquan; Cheng Wei; Chen Yuxia; Liao Tao; Li Xin; Lin Ruotai

2010-01-01

The current state of the researches of irradiation technology on controlling food mycotoxin, pesticide, veterinary drugs and fishery drugs residue was summarized. And the degradation rate, mechanism, products and toxicities of food contamination were expatiated. The free radical from irradiation attack the site of weaker bond, and the less or more toxic substances were produced, which lead to the degradation of the food contamination. The limitations and future application of irradiation technique on controlling food contamination were also analyzed. (authors)

Application of food irradiation technology in development of future special purposed foods

Energy Technology Data Exchange (ETDEWEB)

Byun, Myung Woo; Shin, Myung Gon [Woosong University, Daejeon (Korea, Republic of); Lee, Ju Woon [Korea Atomic Energy Research Institute, Jeongeup (Korea, Republic of)

2010-06-15

Advanced food technologies fused with radiation technology could be applied to the development of various special-purpose foods such space foods, combat rations, emergency foods, and sterile patient meals. In U.S.A, the National Aeronautics and Space Administration and the U.S. Army Natick Soldier RD and E Center co-developed the hazard analysis of critical control point, which is a essential hygienic control system in food industry. Moreover, strict manufacturing standards to produce shelf-stable foods using radiation (ionizing energy) technology were established. In Korea, the advanced food technologies to sterilize various foods using irradiation technology were expected to be applied as a hygiene process on group meals and ready-to-eat/ready-to cook foods, and to produce foods for patients with high hygienic, nutritional, and organoleptic qualities through the combination treatments with irradiation technology. And, it was considered that the advanced technology would improve the related industries and national economy by introducing the food irradiation technology to the Korean traditional fermented foods to improve their functionality. In conclusion, the advanced food technologies which are preoccupied by some developed countries like U.S.A. and Russia will make a contribution to the development of national science and technology, and competitiveness promotion of industry.

Application of food irradiation technology in development of future special purposed foods

International Nuclear Information System (INIS)

Byun, Myung Woo; Shin, Myung Gon; Lee, Ju Woon

2010-01-01

Advanced food technologies fused with radiation technology could be applied to the development of various special-purpose foods such space foods, combat rations, emergency foods, and sterile patient meals. In U.S.A, the National Aeronautics and Space Administration and the U.S. Army Natick Soldier RD and E Center co-developed the hazard analysis of critical control point, which is a essential hygienic control system in food industry. Moreover, strict manufacturing standards to produce shelf-stable foods using radiation (ionizing energy) technology were established. In Korea, the advanced food technologies to sterilize various foods using irradiation technology were expected to be applied as a hygiene process on group meals and ready-to-eat/ready-to cook foods, and to produce foods for patients with high hygienic, nutritional, and organoleptic qualities through the combination treatments with irradiation technology. And, it was considered that the advanced technology would improve the related industries and national economy by introducing the food irradiation technology to the Korean traditional fermented foods to improve their functionality. In conclusion, the advanced food technologies which are preoccupied by some developed countries like U.S.A. and Russia will make a contribution to the development of national science and technology, and competitiveness promotion of industry

Fast Flux Test Facility (FFTF) standby plan

Energy Technology Data Exchange (ETDEWEB)

Hulvey, R.K.

1997-03-06

The FFTF Standby Plan, Revision 0, provides changes to the major elements and project baselines to maintain the FFTF plant in a standby condition and to continue washing sodium from irradiated reactor fuel. The Plan is consistent with the Memorandum of Decision approved by the Secretary of Energy on January 17, 1997, which directed that FFTF be maintained in a standby condition to permit the Department to make a decision on whether the facility should play a future role in the Department of Energy`s dual track tritium production strategy. This decision would be made in parallel with the intended December 1998 decision on the selection of the primary, long- term source of tritium. This also allows the Department to review the economic and technical feasibility of using the FFTF to produce isotopes for the medical community. Formal direction has been received from DOE-RL and Fluor 2020 Daniel Hanford to implement the FFTF standby decision. The objective of the Plan is maintain the condition of the FFTF systems, equipment and personnel to preserve the option for plant restart within three and one-half years of a decision to restart, while continuing deactivation work which is consistent with the standby mode.

Fast Flux Test Facility (FFTF) standby plan

International Nuclear Information System (INIS)

Hulvey, R.K.

1997-01-01

The FFTF Standby Plan, Revision 0, provides changes to the major elements and project baselines to maintain the FFTF plant in a standby condition and to continue washing sodium from irradiated reactor fuel. The Plan is consistent with the Memorandum of Decision approved by the Secretary of Energy on January 17, 1997, which directed that FFTF be maintained in a standby condition to permit the Department to make a decision on whether the facility should play a future role in the Department of Energy's dual track tritium production strategy. This decision would be made in parallel with the intended December 1998 decision on the selection of the primary, long- term source of tritium. This also allows the Department to review the economic and technical feasibility of using the FFTF to produce isotopes for the medical community. Formal direction has been received from DOE-RL and Fluor 2020 Daniel Hanford to implement the FFTF standby decision. The objective of the Plan is maintain the condition of the FFTF systems, equipment and personnel to preserve the option for plant restart within three and one-half years of a decision to restart, while continuing deactivation work which is consistent with the standby mode

Noncoplanar VMAT for nasopharyngeal tumors: Plan quality versus treatment time

Energy Technology Data Exchange (ETDEWEB)

Wild, Esther, E-mail: e.wild@dkfz.de; Bangert, Mark [Department of Medical Physics in Radiation Oncology, German Cancer Research Center, Im Neuenheimer Feld 280, D-69120 Heidelberg (Germany); Nill, Simeon [Joint Department of Physics at The Institute of Cancer Research and The Royal Marsden NHS Foundation Trust, London SM2 5NG (United Kingdom); Oelfke, Uwe [Joint Department of Physics at The Institute of Cancer Research and The Royal Marsden NHS Foundation Trust, London SM2 5NG, United Kingdom and Department of Medical Physics in Radiation Oncology, German Cancer Research Center, Im Neuenheimer Feld 280, D-69120 Heidelberg (Germany)

2015-05-15

Purpose: The authors investigated the potential of optimized noncoplanar irradiation trajectories for volumetric modulated arc therapy (VMAT) treatments of nasopharyngeal patients and studied the trade-off between treatment plan quality and delivery time in radiation therapy. Methods: For three nasopharyngeal patients, the authors generated treatment plans for nine different delivery scenarios using dedicated optimization methods. They compared these scenarios according to dose characteristics, number of beam directions, and estimated delivery times. In particular, the authors generated the following treatment plans: (1) a 4π plan, which is a not sequenced, fluence optimized plan that uses beam directions from approximately 1400 noncoplanar directions and marks a theoretical upper limit of the treatment plan quality, (2) a coplanar 2π plan with 72 coplanar beam directions as pendant to the noncoplanar 4π plan, (3) a coplanar VMAT plan, (4) a coplanar step and shoot (SnS) plan, (5) a beam angle optimized (BAO) coplanar SnS IMRT plan, (6) a noncoplanar BAO SnS plan, (7) a VMAT plan with rotated treatment couch, (8) a noncoplanar VMAT plan with an optimized great circle around the patient, and (9) a noncoplanar BAO VMAT plan with an arbitrary trajectory around the patient. Results: VMAT using optimized noncoplanar irradiation trajectories reduced the mean and maximum doses in organs at risk compared to coplanar VMAT plans by 19% on average while the target coverage remains constant. A coplanar BAO SnS plan was superior to coplanar SnS or VMAT; however, noncoplanar plans like a noncoplanar BAO SnS plan or noncoplanar VMAT yielded a better plan quality than the best coplanar 2π plan. The treatment plan quality of VMAT plans depended on the length of the trajectory. The delivery times of noncoplanar VMAT plans were estimated to be 6.5 min in average; 1.6 min longer than a coplanar plan but on average 2.8 min faster than a noncoplanar SnS plan with comparable

Noncoplanar VMAT for nasopharyngeal tumors: Plan quality versus treatment time

International Nuclear Information System (INIS)

Wild, Esther; Bangert, Mark; Nill, Simeon; Oelfke, Uwe

2015-01-01

Purpose: The authors investigated the potential of optimized noncoplanar irradiation trajectories for volumetric modulated arc therapy (VMAT) treatments of nasopharyngeal patients and studied the trade-off between treatment plan quality and delivery time in radiation therapy. Methods: For three nasopharyngeal patients, the authors generated treatment plans for nine different delivery scenarios using dedicated optimization methods. They compared these scenarios according to dose characteristics, number of beam directions, and estimated delivery times. In particular, the authors generated the following treatment plans: (1) a 4π plan, which is a not sequenced, fluence optimized plan that uses beam directions from approximately 1400 noncoplanar directions and marks a theoretical upper limit of the treatment plan quality, (2) a coplanar 2π plan with 72 coplanar beam directions as pendant to the noncoplanar 4π plan, (3) a coplanar VMAT plan, (4) a coplanar step and shoot (SnS) plan, (5) a beam angle optimized (BAO) coplanar SnS IMRT plan, (6) a noncoplanar BAO SnS plan, (7) a VMAT plan with rotated treatment couch, (8) a noncoplanar VMAT plan with an optimized great circle around the patient, and (9) a noncoplanar BAO VMAT plan with an arbitrary trajectory around the patient. Results: VMAT using optimized noncoplanar irradiation trajectories reduced the mean and maximum doses in organs at risk compared to coplanar VMAT plans by 19% on average while the target coverage remains constant. A coplanar BAO SnS plan was superior to coplanar SnS or VMAT; however, noncoplanar plans like a noncoplanar BAO SnS plan or noncoplanar VMAT yielded a better plan quality than the best coplanar 2π plan. The treatment plan quality of VMAT plans depended on the length of the trajectory. The delivery times of noncoplanar VMAT plans were estimated to be 6.5 min in average; 1.6 min longer than a coplanar plan but on average 2.8 min faster than a noncoplanar SnS plan with comparable

Dosimetric improvements following 3D planning of tangential breast irradiation

International Nuclear Information System (INIS)

Aref, Amr; Thornton, Dale; Youssef, Emad; He, Tony; Tekyi-Mensah, Samuel; Denton, Lori; Ezzell, Gary

2000-01-01

Purpose: To evaluate the dosimetric difference between a simple radiation therapy plan utilizing a single contour and a more complex three-dimensional (3D) plan utilizing multiple contours, lung inhomogeneity correction, and dose-based compensators. Methods and Materials: This is a study of the radiation therapy (RT) plans of 85 patients with early breast cancer. All patients were considered for breast-conserving management and treated by conventional tangential fields technique. Two plans were generated for each patient. The first RT plan was based on a single contour taken at the central axis and utilized two wedges. The second RT plan was generated by using the 3D planning system to design dose-based compensators after lung inhomogeneity correction had been made. The endpoints of the study were the comparison between the volumes receiving greater than 105% and greater than 110% of the reference dose, as well as the magnitude of the treated volume maximum dose. Dosimetric improvement was defined to be of significant value if the volume receiving > 105% of one plan was reduced by at least 50% with the absolute difference between the volumes being 5% or greater. The dosimetric improvements in 49 3D plans (58%) were considered of significant value. Patients' field separation and breast size did not predict the magnitude of improvement in dosimetry. Conclusion: Dose-based compensator plans significantly reduced the volumes receiving > 105%, >110%, and volume maximum dose.