WorldWideScience

Sample records for furniture wood wastes

  1. Furniture wood wastes: Experimental property characterisation and burning tests

    International Nuclear Information System (INIS)

    Tatano, Fabio; Barbadoro, Luca; Mangani, Giovanna; Pretelli, Silvia; Tombari, Lucia; Mangani, Filippo

    2009-01-01

    Referring to the industrial wood waste category (as dominant in the provincial district of Pesaro-Urbino, Marche Region, Italy), this paper deals with the experimental characterisation and the carrying out of non-controlled burning tests (at lab- and pilot-scale) for selected 'raw' and primarily 'engineered' ('composite') wood wastes. The property characterisation has primarily revealed the following aspects: potential influence on moisture content of local weather conditions at outdoor wood waste storage sites; generally, higher ash contents in 'engineered' wood wastes as compared with 'raw' wood wastes; and relatively high energy content values of 'engineered' wood wastes (ranging on the whole from 3675 to 5105 kcal kg -1 for HHV, and from 3304 to 4634 kcal kg -1 for LHV). The smoke qualitative analysis of non-controlled lab-scale burning tests has primarily revealed: the presence of specific organic compounds indicative of incomplete wood combustion; the presence exclusively in 'engineered' wood burning tests of pyrroles and amines, as well as the additional presence (as compared with 'raw' wood burning) of further phenolic and containing nitrogen compounds; and the potential environmental impact of incomplete industrial wood burning on the photochemical smog phenomenon. Finally, non-controlled pilot-scale burning tests have primarily given the following findings: emission presence of carbon monoxide indicative of incomplete wood combustion; higher nitrogen oxide emission values detected in 'engineered' wood burning tests as compared with 'raw' wood burning test; and considerable generation of the respirable PM 1 fraction during incomplete industrial wood burning.

  2. Wood wastes: Uses

    International Nuclear Information System (INIS)

    Cipro, A.

    1993-01-01

    The 1,500 industrial firms manufacturing furniture in the Italian Province of Treviso can generate up to 190,000 tonnes of wood wastes annually. In line with the energy conservation-environmental protection measures contained in Italian Law No. 475/88, this paper indicates convenient uses for these wood wastes - as a raw material for fibreboards or as a fuel to be used in the furniture manufacturing plants themselves and in kilns producing lime. Reference is made to the wood wastes gasification/power generation system being developed by ENEA (the Italian Agency for New Technology, Energy and the Environment)

  3. Physical and chemical evaluation of furniture waste briquettes.

    Science.gov (United States)

    Moreno, Ana Isabel; Font, Rafael; Conesa, Juan A

    2016-03-01

    Furniture waste is mainly composed of wood and upholstery foam (mostly polyurethane foam). Both of these have a high calorific value, therefore, energy recovery would be an appropriate process to manage these wastes. Nevertheless, the drawback is that the energy content of these wastes is limited due to their low density mainly that of upholstery foam. Densification of separate foam presents difficulties due to its elastic character. The significance of this work lies in obtaining densified material by co-densification of furniture wood waste and polyurethane foam waste. Densification of furniture wood and the co-densification of furniture wood waste with polyurethane foam have been studied. On the one hand, the parameters that have an effect on the quality of the furniture waste briquettes have been analysed, i.e., moisture content, compaction pressure, presence of lignin, etc. The maximum weight percentage of polyurethane foam that can be added with furniture wood waste to obtain durable briquettes and the optimal moisture were determined. On the other hand, some parameters were analysed in order to evaluate the possible effect on the combustion. The chemical composition of waste wood was compared with untreated wood biomass; the higher nitrogen content and the concentration of some metals were the most important differences, with a significant difference of Ti content. Copyright © 2016 Elsevier Ltd. All rights reserved.

  4. ORC technology for waste-wood to energy conversion in the furniture manufacturing industry

    Directory of Open Access Journals (Sweden)

    Moro Riccardo

    2008-01-01

    Full Text Available Exploitation of low and medium temperature thermal sources, in particular those based on biomass combustion and on industrial residual heat recovery, has been increasingly investigated in the last decades, accordingly to the growing interest towards reduction in primary energy consumption and environmental issues. Organic Rankine cycle technology allows designing power plants that are less demanding in terms of auxiliaries, safety systems, maintenance and operating costs when compared to conventional water steam power plants. To support the preliminary technical and economic design of this kind of plants in different contexts, a simulation code of part load and off-design operation of an organic Rankine cycle unit for combined heat and power has been developed. In the paper, taking the real situation of a furniture manufacturing factory as a starting point, it is shown how all energy flows occurring all year long inside the combined heat and power plant, can be estimated on the basis of the thermal user duty time profile, the available biomass flow rate and the adopted operation strategy. This information is the basis in order to correctly evaluate the energetic, economic and environmental advantages of the proposed technical solution, with respect to a particular context, as it is shown in the concluding part of the paper.

  5. CEFTA Agreement and Opportunities for Wood Furniture Export of the Republic of Macedonia

    OpenAIRE

    Ilijana Petrovska; Živka Meloska; Krum Efremov; Kiril Postolov

    2016-01-01

    This paper is focused on business possibilities of CEFTA 2006 and its influence on export trend of wood furniture from the Republic of Macedonia. First, six categories of wood furniture export are analyzed such as: office furniture, kitchen furniture, bedroom furniture, living and dining room furniture, shop furniture and other furniture, presenting a positive trend in each category, except for living and dining room furniture. The total export of wood furniture shows a positive trend. The se...

  6. Transitioning Wood Furniture Products towards Sustainability

    OpenAIRE

    Lu, Lei; Zhang, WeiGuang; Zhang, WeiQing

    2008-01-01

    Wood Furniture Products (WFPs) play a significant role in both the global economy and the transition of society towards sustainability. This paper begins with a brief description of the industry and highlights the current challenges and compelling measures of WFPs from a systems perspective through the lens of the Framework for Strategic Sustainable Development (FSSD) and by applying backcasting from sustainability principles (SPs). An examination of the challenges and opportunities of WFPs i...

  7. Utilization trend of wood species utilized in furniture industry in ...

    African Journals Online (AJOL)

    The utilization trend of four commonly used wood species and two lesser used wood species that are used for furniture making was examined. The wood species are Mansonia altissima (Mansonia), Khaya ivorensis (Khaya), Cordia millenii (Cordia) and Tectona grandis (Teak) as commonly used wood species; Aningeria ...

  8. Physical and chemical evaluation of furniture waste briquettes

    OpenAIRE

    Moreno Caballero, Ana Isabel; Font, Rafael; Conesa, Juan A.

    2016-01-01

    Furniture waste is mainly composed of wood and upholstery foam (mostly polyurethane foam). Both of these have a high calorific value, therefore, energy recovery would be an appropriate process to manage these wastes. Nevertheless, the drawback is that the energy content of these wastes is limited due to their low density mainly that of upholstery foam. Densification of separate foam presents difficulties due to its elastic character. The significance of this work lies in obtaining densified m...

  9. FORMULATING ULTRA-LOW-VOC WOOD FURNITURE COATINGS

    Science.gov (United States)

    The article discusses the formulation of ultra-low volatile organic compound (VOC) wood furniture coatings. The annual U.S. market for wood coatings is about 240, 000 cu m (63 million gal). In this basis, between 57 and 91 million kg (125 and 200 million lb) of VOCs are emitted i...

  10. Prioritization of Wood Species Utilized for Furniture Making in ...

    African Journals Online (AJOL)

    The preference for wood species varied among the three cities and among the three scales of furniture factories. However, Mansonia altissima was most preferred in the three cities with rates of 99.0%, 97.4% and 97.7% in Lagos, Ibadan and Benin respectively. 39 wood species were compiled from the lists of the three cities ...

  11. The wood household furniture and kitchen cabinet industries: a contrast in fortune

    Science.gov (United States)

    William G. Luppold; Matthew S. Bumgardner

    2009-01-01

    In 1977, the value of wood household furniture shipments from domestic manufacturers exceeded kitchen cabinet shipments by 170 percent; conversely, in 2006 shipments of cabinets exceeded shipments of furniture by 78 percent. The most apparent reason for the decrease in domestic furniture shipments is the increase in furniture imports, whereas cabinet demand has...

  12. Integrating energy and environmental management in wood furniture industry.

    Science.gov (United States)

    Gordić, Dušan; Babić, Milun; Jelić, Dubravka; Konćalović, Davor; Vukašinović, Vladimir

    2014-01-01

    As energy costs continue to rise, industrial plants (even those of energy nonintensive industries such as furniture industry) need effective way to reduce the amount of energy they consume. Besides, there are a number of economic and environmental reasons why a company should consider environmental management initiatives. This paper provides a detailed guideline for implementing joint energy and environmental management system in wood furniture industrial company. It covers in detail all essential aspects of the system: initial system assessment, organization, policy development, energy and environmental auditing, action plan development, system promotion, checking system performance, and management review.

  13. Integrating Energy and Environmental Management in Wood Furniture Industry

    Science.gov (United States)

    Babić, Milun; Jelić, Dubravka; Konćalović, Davor; Vukašinović, Vladimir

    2014-01-01

    As energy costs continue to rise, industrial plants (even those of energy nonintensive industries such as furniture industry) need effective way to reduce the amount of energy they consume. Besides, there are a number of economic and environmental reasons why a company should consider environmental management initiatives. This paper provides a detailed guideline for implementing joint energy and environmental management system in wood furniture industrial company. It covers in detail all essential aspects of the system: initial system assessment, organization, policy development, energy and environmental auditing, action plan development, system promotion, checking system performance, and management review. PMID:24587734

  14. Wood Identification of 18th Century Furniture. Interpreting Wood Naming Inventoires

    Directory of Open Access Journals (Sweden)

    Rocio Astrid BERNAL

    2011-09-01

    Full Text Available The 18th century Portuguese church furniture represents an extraordinary richness recognised worldwide, which demands safeguarding and valorisation. The identification of the wood of furniture artworks is the most important component for its comprehension and preservation. In this work wood anatomical characters of an 18th century Portuguese decorative furniture set from the Colegiada de São Martinho de Cedofeita, in Porto, were analysed to identify the woods used for manufacturing and to clarify their common names. Furthermore, the objectives were to recognise some of the criteria for choice of wood as well as the source of each wood. The woods identified from 16 fragments belong to Apuleia sp., Acacia sp., Neolamarckia sp. and Castanea sativa. Apuleia sp. and Acacia sp. woods most likely arrived from Brazil, while the Neolamarckia sp. woods likely arrived from India and the C. sativa woods from Portugal. The results are in accordance with the known Portuguese colonial sea routes of the 15th -18th centuries. Interestingly the terms found in the inventories can refer to finishing methods instead to the name of the woods, as for instance “oil wood” can refer to “oiled wood” or “linseed oiled wood”. The species choice may be related to the mechanical properties of the wood as well as the original tree size. Two large planks of Acacia sp. were used for the top of the “Portuguese arcaz”, and Apuleia sp. was found on main structural elements of this set of furniture, suggesting that wood colour was also important. Woods from Neolamarckia sp. and C. sativa, were also identified, being Castanea wood present only in the most recent pieces of the furniture set.

  15. Understanding perception of wood household furniture: application of a policy capturing approach

    Science.gov (United States)

    David Brinberg; Matthew Bumgardner; Kim Daniloski

    2007-01-01

    Consumer and retailer perceptions of wood household furniture were modeled using a policy capturing approach. A sample of consumers and retailers evaluated four pictures of wood furniture on eight visual cues deemed representative of the furniture purchasing environment. These cues were then regressed on respondents' judgment of willingness to pay for each...

  16. Competitiveness of U.S. wood furniture manufacturers - Lessons learned from the softwood moulding industry

    Science.gov (United States)

    Al Schuler; Russ Taylor; Philip A. Araman

    2001-01-01

    The furniture industry in the United States has been losing market share to imports for the past two decades. This article focuses on the market segment where most of the loss has occurred: the important wood household (non-upholstered) sector (SIC code 2511). In the upholstered furniture sector, exports are still larger than imports. But the wood household furniture...

  17. The global wood furniture value chain: what prospects for upgrading by developing countries? The case of South Africa

    OpenAIRE

    Kaplinsky, Raphael; Memedovic, Olga; Morris, Mike; Readman, Jeff

    2003-01-01

    Because of its resource and labour intensity, the wood furniture sector presents an opportunity for developing countries and their firms to participate effectively in the global economy. This paper begins with a brief description of the global wood furniture industry and highlights the importance of exports wood furniture products for developing countries and emerging and transitional economies. The paper then maps the wood furniture value chain and opens-up the nature of the buying function,...

  18. Urban Wood Waste Resource Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Wiltsee, G.

    1998-11-20

    This study collected and analyzed data on urban wood waste resources in 30 randomly selected metropolitan areas in the United States. Three major categories wood wastes disposed with, or recovered from, the municipal solid waste stream; industrial wood wastes such as wood scraps and sawdust from pallet recycling, woodworking shops, and lumberyards; and wood in construction/demolition and land clearing debris.

  19. Determinants of wood dust exposure in the Danish furniture industry.

    Science.gov (United States)

    Mikkelsen, Anders B; Schlunssen, Vivi; Sigsgaard, Torben; Schaumburg, Inger

    2002-11-01

    This paper investigates the relation between wood dust exposure in the furniture industry and occupational hygiene variables. During the winter 1997-98 54 factories were visited and 2362 personal, passive inhalable dust samples were obtained; the geometric mean was 0.95 mg/m(3) and the geometric standard deviation was 2.08. In a first measuring round 1685 dust concentrations were obtained. For some of the workers repeated measurements were carried out 1 (351) and 2 weeks (326) after the first measurement. Hygiene variables like job, exhaust ventilation, cleaning procedures, etc., were documented. A multivariate analysis based on mixed effects models was used with hygiene variables being fixed effects and worker, machine, department and factory being random effects. A modified stepwise strategy of model making was adopted taking into account the hierarchically structured variables and making possible the exclusion of non-influential random as well as fixed effects. For woodworking, the following determinants of exposure increase the dust concentration: manual and automatic sanding and use of compressed air with fully automatic and semi-automatic machines and for cleaning of work pieces. Decreased dust exposure resulted from the use of compressed air with manual machines, working at fully automatic or semi-automatic machines, functioning exhaust ventilation, work on the night shift, daily cleaning of rooms, cleaning of work pieces with a brush, vacuum cleaning of machines, supplementary fresh air intake and safety representative elected within the last 2 yr. For handling and assembling, increased exposure results from work at automatic machines and presence of wood dust on the workpieces. Work on the evening shift, supplementary fresh air intake, work in a chair factory and special cleaning staff produced decreased exposure to wood dust. The implications of the results for the prevention of wood dust exposure are discussed.

  20. The Amish furniture cluster in Ohio: competitive factors and wood use estimates

    Science.gov (United States)

    Matthew Bumgardner; Robert Romig; William Luppold

    2008-01-01

    This paper is an assessment of wood use by the Amish furniture cluster located in northeastern Ohio. The paper also highlights the competitive and demographic factors that have enabled cluster growth and new business formation in a time of declining market share for the overall U.S. furniture industry. Several secondary information sources and discussions with local...

  1. Studies on the Wood-Based Furniture, Leather Products and Footwear Manufacturing Industries in the Philippines

    OpenAIRE

    Poblador, Niceto; Solis, Adriano; Ybanez, Roy; Aragon, Bienvenido

    1983-01-01

    This paper aims to develop both the micro and macro data on the entire range of socioeconomic, managerial and technical issues faced by the wood-based furniture, footwear and leather tanning industry. The studies are intended to provide an initial base for policy formulation and implementation and to evolve a set of relevant guidelines for managerial and technical decisions. Findings show that the wood-based furniture industry is characterized by relative ease of entry that allows manufacture...

  2. China’s wood furniture manufacturing industry: industrial cluster and export competitiveness

    OpenAIRE

    Yang, hongqiang; Ji, Chunyi; Nie, Ning; Hong, Yinxing

    2012-01-01

    China is the largest furniture exporter in the world. Its wood furniture industry has become an important part of the country’s forestry economic development. Hence, investigating China’s furniture industry cluster and export competitiveness is favorable for the sustainable development of China’s forestry industry. This study indicates that, under the guidance of the export-oriented strategy of China’s reform and opening up for 30 years, the country’s furniture industry has formed three big i...

  3. Global Market Access in the Internet Era: South Africa's Wood Furniture Industry.

    Science.gov (United States)

    Moodley, Sagren

    2002-01-01

    Explores the link between Internet connectivity and access to global markets, and uses the South African wood furniture producers as they are integrated into global value chains and exposed to the demands of more sophisticated markets. Articulates policy recommendations to promote greater diffusion of e-commerce technologies in the wood furniture…

  4. Bio-oil production from fast pyrolysis of waste furniture sawdust in a fluidized bed.

    Science.gov (United States)

    Heo, Hyeon Su; Park, Hyun Ju; Park, Young-Kwon; Ryu, Changkook; Suh, Dong Jin; Suh, Young-Woong; Yim, Jin-Heong; Kim, Seung-Soo

    2010-01-01

    The amount of waste furniture generated in Korea was over 2.4 million tons in the past 3 years, which can be used for renewable energy or fuel feedstock production. Fast pyrolysis is available for thermo-chemical conversion of the waste wood mostly into bio-oil. In this work, fast pyrolysis of waste furniture sawdust was investigated under various reaction conditions (pyrolysis temperature, particle size, feed rate and flow rate of fluidizing medium) in a fluidized-bed reactor. The optimal pyrolysis temperature for increased yields of bio-oil was 450 degrees C. Excessively smaller or larger feed size negatively affected the production of bio-oil. Higher flow and feeding rates were more effective for the production of bio-oil, but did not greatly affect the bio-oil yields within the tested ranges. The use of product gas as the fluidizing medium had a potential for increased bio-oil yields.

  5. A SUSTAINABLE SUPPLY CHAIN MODEL OF RELATIONSHIP BETWEEN WOOD SUPPLIER AND FURNITURE INDUSTRY IN INDONESIA

    OpenAIRE

    and Shalihuddin Djalal Tandjung, Muh. Hisjam Adi Djoko Guritno

    2012-01-01

    Wooden furniture industry is an important industry sector in Indonesia, because many people’s welfare relyon this industry sector and the industry has a big social and environmental impacts. Many wooden furnitureindustries in Indonesia, especially in Central Java Province face problems related to the sustainability. The relationbetween wood suppliers and furniture industry is studied in this paper. A sustainable supply chain management (s-SCM) model is proposed as an approach for solutions fo...

  6. Cleaner Production Applied in a Small Furniture Industry in Brazil: Addressing Focused Changes in Design to Reduce Waste

    Directory of Open Access Journals (Sweden)

    Carlos Mario Gutiérrez Aguilar

    2017-10-01

    Full Text Available The wood industry is known for being among the biggest resource consumers, having a relatively low yield. The wood furniture industry as part of the wood industry also remains a big generator of residues and a big consumer of resources. Diverse solutions and technologies have been developed to deal with the residues generated, but those technologies are mostly applied at the end of the production chain with limited results. Cleaner production represents a program based on continuous strategies applied to a more sustainable use of materials and energy, minimizing waste and pollution. This paper presents a case study of a cleaner production program developed in a small furniture industry in Salvador de Bahia, Brazil, applying the concepts of cleaner production with parameters of ecodesign developed for the furniture industry. The object of study was the production of a wooden chair made from eucalyptus wood. The application of the cleaner production program and ecodesign parameters allowed a detailed characterization of the waste, resulting in opportunities for a reduction of the use of raw material by 30%, a reduction in waste by 49% and allowing a reduction in energy by 36% due to simplification of the productive process. Among the strategies applied were reshaping pieces, redesigning, and the substitution of materials. The results suggest that despite the existence of more complex environmental methods and approaches, the application of cleaner production plus ecodesign parameters could be more achievable for micro and small furniture industries.

  7. Potential Co-Generation of Electrical Energy from Mill Waste: A Case Study of the Malaysian Furniture Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Jegatheswaran Ratnasingam

    2016-04-01

    Full Text Available Furniture manufacturing in Malaysia is an established industry driven primarily by the availability of raw materials and labor. However, the industry suffers from the low-recovery rate of its materials, as it produces a substantial amount of waste during the manufacturing process. Although smaller waste fragments, or off-cuts, are recovered for other purposes, the splinters, shavings, and coarse dust have little economic value and are often discarded. Because wood is a well-established source of bioenergy, this study investigated the potential use of mill waste from the furniture-manufacturing industry for electrical energy generation. Waste from the rubberwood, bamboo, and rattan furniture industries was evaluated for its potential electrical energy generation, and the amount was compared with the electrical energy that was consumed by the furniture industry. The study also compared the emission of greenhouse gases from the combustion of these waste materials against fossil fuels used to generate electricity to assess its potential in terms of the environmental benefits. In conclusion, such mill waste could be utilized as substitute for fossil fuel to generate energy in the furniture industry.

  8. DEMONSTRATION OF NO-VOC/NO-HAP WOOD FURNITURE COATING SYSTEM

    Science.gov (United States)

    The United States Environmental Protection Agency has contracted with AeroVironment Environmental Services, Inc. and its subcontractor, Adhesives Coating Co., to develop and demonstrate a no-VOC (volatile organic compound)/no-HAP (hazardous air pollutant) wood furniture coating s...

  9. POLLUTION PREVENTION CASE STUDIES: LOW-VOC/HAP WOOD FURNITURE COATINGS

    Science.gov (United States)

    This article provides a brief profile of the wood furniture industry, discusses pollution prevention activities typically implemented, describes the four low-VOC/HAP coating technologies studied. and summarizes one case study for each of the low-VOC/HAP coating yechnologies inves...

  10. Wood Dust in Joineries and Furniture Manufacturing : An Exposure Determinant and Intervention Study

    NARCIS (Netherlands)

    Douwes, Jeroen; Cheung, Kerry; Prezant, Bradley; Sharp, Mark; Corbin, Marine; McLean, Dave; 't Mannetje, Andrea; Schlunssen, Vivi; Sigsgaard, Torben; Kromhout, Hans; LaMontagne, Anthony D; Pearce, Neil; McGlothlin, James D

    Objectives: To assess wood dust exposures and determinants in joineries and furniture manufacturing and to evaluate the efficacy of specific interventions on dust emissions under laboratory conditions. Also, in a subsequent follow-up study in a small sample of joinery workshops, we aimed to develop,

  11. Power generation from waste wood

    Energy Technology Data Exchange (ETDEWEB)

    Nitsche, H

    1980-04-18

    Since the energy crisis, power generation from waste wood has become increasingly important. The most profitable way to use waste wood in woodworking plants with an annual production of 100 to 150,000 m/sup 3/ solid measure of wood chips and bark is by combustion and thermal energy recovery. In plants with an annual production of 10,000 m/sup 3/ solid measure of wood chips and bark, electric power generation is a suitable application.

  12. Wood waste in Europe

    Energy Technology Data Exchange (ETDEWEB)

    Matos, O; Ribeiro, R [Biomass Centre for Energy - CBE, Miranda do Corvo (Portugal)

    1998-12-31

    The energy policy of the EC, as well as most of member states points to a sizeable increase of energy production based on renewable energy sources, wood, wood residues, agricultural residues, energy crops including SRF, organic sludges, solid residues, etc. Most recent goals indicate a desirable duplication of today`s percentage by 2010. The reasons for this interest, besides diversification of sources, less dependence on imported fuels, use of endogenous resources, expected decrease of fossil fuel reserves, use of available land, additional employment and income for rural communities, etc., are related to important environmental benefits namely in terms of emissions of hot house gases. Wood waste, resulting from forest operations, cleaning, cultural and final cuttings, and from wood based industries, constitute a special important resource by reason of quality and availability. In addition to this they do not require additional land use and the removal is beneficial. In the run-up to the becoming December`s 1997 `Climate Change Summit` in Kioto, there is mounting pressure on companies to plan on carbon cuts. (author) 6 refs., 1 tab.

  13. Wood waste in Europe

    Energy Technology Data Exchange (ETDEWEB)

    Matos, O.; Ribeiro, R. [Biomass Centre for Energy - CBE, Miranda do Corvo (Portugal)

    1997-12-31

    The energy policy of the EC, as well as most of member states points to a sizeable increase of energy production based on renewable energy sources, wood, wood residues, agricultural residues, energy crops including SRF, organic sludges, solid residues, etc. Most recent goals indicate a desirable duplication of today`s percentage by 2010. The reasons for this interest, besides diversification of sources, less dependence on imported fuels, use of endogenous resources, expected decrease of fossil fuel reserves, use of available land, additional employment and income for rural communities, etc., are related to important environmental benefits namely in terms of emissions of hot house gases. Wood waste, resulting from forest operations, cleaning, cultural and final cuttings, and from wood based industries, constitute a special important resource by reason of quality and availability. In addition to this they do not require additional land use and the removal is beneficial. In the run-up to the becoming December`s 1997 `Climate Change Summit` in Kioto, there is mounting pressure on companies to plan on carbon cuts. (author) 6 refs., 1 tab.

  14. A SUSTAINABLE SUPPLY CHAIN MODEL OF RELATIONSHIP BETWEEN WOOD SUPPLIER AND FURNITURE INDUSTRY IN INDONESIA

    Directory of Open Access Journals (Sweden)

    Muh. Hisjam Adi Djoko Guritno and Shalihuddin Djalal Tandjung

    2012-06-01

    Full Text Available Wooden furniture industry is an important industry sector in Indonesia, because many people’s welfare relyon this industry sector and the industry has a big social and environmental impacts. Many wooden furnitureindustries in Indonesia, especially in Central Java Province face problems related to the sustainability. The relationbetween wood suppliers and furniture industry is studied in this paper. A sustainable supply chain management (s-SCM model is proposed as an approach for solutions for the problems. The approach is chosen due to the characteristics of the problems that related to economic, social, and environmental problems. This aim of this paper is to determine how much supply teak wood must be provided by PP to satisfy furniture industry demand, how much production capacity that must be increased and how large forest area that must be planted in order to achieve environmental and social goals without sacrificing economical goals much. Goal programming (GP is chosen for solving the problems, because the goals are to maximize the total benefit,minimize the total loss and anticipate the conflicts between goals. Numerical trial based on observation in teak wooden furniture industry in Central Java was used to illustrate our findings. Using pareto efficient principle, the model can satisfy all goals that need to be achieved. Numerical results can be used by decision makers in teak wood industry to analyze the trade-off among several set of alternative solutions.

  15. The Creation Of Furniture Products Design From Stem Waste Of Sugar Palm Tree (Arenga Pinnata

    Directory of Open Access Journals (Sweden)

    I Wayan Seriyoga Parta

    2017-11-01

    Full Text Available Sugar Palm tree (Arenga Pinnata is one of potential natural resources that can be used as a based material of furniture products. But, this sugar palm tree potential hasn’t exploited maximally and only throws away as a waste that contaminates the environment. On the other side, woods that have been used as based material of furniture products are getting rare and expensive. Based on that problem, this research is aimed to design new furniture products models that exploite the stem waste as a prominent based material.  This research uses experiment method with steps: 1 finding and formulating concepts of furniture products design creation based on analysis towards the stem waste of sugar palm tree characteristics; 2 implementing of finding concepts to become furniture products models from stem waste of sugar palm tree. As a result of the research, it is found “tube” concept and tatah carved concept as a right concept to be applied in creation of furniture products from stem waste of sugar palm tree. Implementing of “tube” concept and tatah carved concept is made successfully in shape of some furniture products design such as:  table model, chair model and wardrobe model. Realization of these designs has concerned with the use of sugar palm tree as a prominent based material. According to the result of evaluation, all of these designs are deserved to be made. So, it is concluded that to anticipate the qualified wood as a based material of furniture products, we can use stem waste of sugar palm tree as alternative based material. Pohon aren (Arenga Pinnata merupakan salah satu sumber daya alam yang potensial digunakan sebagai bahan baku produk mebel. Akan tetapi, potensi batang pohon aren itu belum dimanfaatkan secara maksimal dan hanya terbuang menjadi limbah yang mengotori lingkungan. Di sisi lain, kayu yang selama ini dimanfaatkan sebagai bahan baku produk mebel keberadaannya makin langka dan mahal. Bertolak dari permasalahan itu

  16. Upgrading Wood-Based Industries: Harnessing the Social Network of Small-Scale Furniture Producers and Their Institutions

    Directory of Open Access Journals (Sweden)

    Melati ,

    2011-05-01

    Full Text Available Furniture is a major export commodity in Indonesia with a total value of USD 1.96 million in 2007.  Jepara District is one of the key location for wood furniture production with 15,271 furniture related business units employing 176,469 workers.  However, inefficiencies and power imbalances throughout the furniture value chain have resulted in overharvesting and uneven distribution of gains among the industry’s actors.  In contrast to price-setting international furniture retailers, small-scale producers enjoy the least value from their products.  In order to increase added value and competitiveness, small-scale furniture producers have made efforts to upgrade by harnessing their social network and institutions.  This paper describes small-scale furniture producers’ efforts to upgrade by utilising their social network and institutions in Jepara.  Data was collected through in-depth interviews with members of the small-scale furniture producers’ association.  The research provides insight into the nature of social networks and information flow and develops future scenarios to upgrade.  The scenarios will not only benefit the furniture industry in Jepara, but may also be adopted for similar industries throughout Indonesia and the world, and potentially improve many people’s economies and livelihoods.Keywords: wood-based industry, furniture, small-scale, social network, institution

  17. Urban Wood Waste Resource Assessment; TOPICAL

    International Nuclear Information System (INIS)

    Wiltsee, G.

    1998-01-01

    This study collected and analyzed data on urban wood waste resources in 30 randomly selected metropolitan areas in the United States. Three major categories wood wastes disposed with, or recovered from, the municipal solid waste stream; industrial wood wastes such as wood scraps and sawdust from pallet recycling, woodworking shops, and lumberyards; and wood in construction/demolition and land clearing debris

  18. A SUSTAINABLE SUPPLY CHAIN MODEL OF RELATIONSHIP BETWEEN WOOD SUPPLIER AND FURNITURE INDUSTRY IN INDONESIA

    Directory of Open Access Journals (Sweden)

    Muh. Hisjam Adi Djoko Guritno and Shalihuddin Djalal Tandjung

    2012-06-01

    between wood suppliers and furniture industry is studied in this paper. A sustainable supply chain management (s-SCM model is proposed as an approach for solutions for the problems. The approach is chosen due to the characteristics of the problems that related to economic, social, and environmental problems. This aim of this paper is to determine how much supply teak wood must be provided by PP to satisfy furniture industry demand, how much production capacity that must be increased and how large forest area that must be planted in order to achieve environmental and social goals without sacrificing economical goals much. Goal programming (GP is chosen for solving the problems, because the goals are to maximize the total benefit,minimize the total loss and anticipate the conflicts between goals. Numerical trial based on observation in teak wooden furniture industry in Central Java was used to illustrate our findings. Using pareto efficient principle, the model can satisfy all goals that need to be achieved. Numerical results can be used by decision makers in teak wood industry to analyze the trade-off among several set of alternative solutions.

  19. Assessment of occupational exposure to wood dust in the Polish furniture industry

    Directory of Open Access Journals (Sweden)

    Małgorzata Szewczyńska

    2017-02-01

    Full Text Available Background: Occupational exposure to wood dust can be responsible for many different harmful health effects, especially in workers employed in the wood industry. The assessment of wood dust adverse effects to humans, as well as the interpretation of its concentration measurements carried out to assess potential occupational exposure are very difficult. First of all, it is due to possible occurrence of different kind of wood dust in the workplace air, namely wood dust from dozens of species of trees belonging to 2 kinds of botanical gymnosperms and angiosperms, as well as to its different chemical composition. Material and Methods: Total dust and respirable wood dust in the workplace air in the furniture industry was determined using the filtration-gravimetric method in accordance with Polish Standards PN-Z-04030-05:1991 and PN-Z-04030-06:1991. Air samples were collected based on the principles of individual dosimetry. Results: Total dust concentrations were 0.84–13.92 mg/m3 and inhalable fraction concentrations, obtained after the conversion of total dust by applying a conversion factor of 1.59, were 1.34–22.13 mg/m3. Respirable fraction concentrations were 0.38–4.04 mg/m3, which makes approx. 25% of the inhalable fraction on average. The highest concentrations occurred in grinding and the lowest during milling processes of materials used in the manufacture of furniture. Conclusions: The results indicate that the share of respirable fraction in the inhalable fraction of wood dust is considerable. Due to the determination of the threshold limit value (TLV for the inhalable fraction of wood dust, it is necessary to replace the previously used samplers for total dust with samplers that provide quantitative separation of wood dust inhalable fractions in accordance with the convention of this fraction as defined in PN-EN 481:1998. Med Pr 2017;68(1:45–60

  20. Technical changes and the rate of profit in the Canadian wood, furniture, and paper industries

    OpenAIRE

    M Webber; S Tonkin

    1988-01-01

    In this paper the rate of profit is examined and the components of changes in the rate of profit are identified in the wood, furniture, and paper industries of Canada for the years 1952 to 1981. The rate of profit in the wood industry generally rose, until a dramatic fall since 1979 onwards; this fall was largely due to a collapse of market prices and to the effects of that collapse on the technical composition of capital (via changes in the rate of capacity utilization). Profit rates in the ...

  1. New productive technologies for wood and furniture industry; Nuevas tecnologias productivas para el sector de la madera y del mueble

    Energy Technology Data Exchange (ETDEWEB)

    Sojo Calvo, F. J.

    2012-07-01

    During recent years, the wood industry and furniture industry have declined sharply, up to 46,5% of the total employment. These companies have always had a familiar character, their cost structure has enabled them to stay afloat during the crisis while larger companies have succumbed. The main problems that threaten their viability are the fall of the construction sector in the case of wood and the increasing imports in the case of furniture. The Industrial Observatory of the Wood Industry has made available two tools to put the latest technology available to the companies. (Author)

  2. Wood Dust in Joineries and Furniture Manufacturing: An Exposure Determinant and Intervention Study.

    Science.gov (United States)

    Douwes, Jeroen; Cheung, Kerry; Prezant, Bradley; Sharp, Mark; Corbin, Marine; McLean, Dave; 't Mannetje, Andrea; Schlunssen, Vivi; Sigsgaard, Torben; Kromhout, Hans; LaMontagne, Anthony D; Pearce, Neil; McGlothlin, James D

    2017-05-01

    To assess wood dust exposures and determinants in joineries and furniture manufacturing and to evaluate the efficacy of specific interventions on dust emissions under laboratory conditions. Also, in a subsequent follow-up study in a small sample of joinery workshops, we aimed to develop, implement, and evaluate a cost-effective and practicable intervention to reduce dust exposures. Personal inhalable dust (n = 201) was measured in 99 workers from 10 joineries and 3 furniture-making factories. To assess exposure determinants, full-shift video exposure monitoring (VEM) was conducted in 19 workers and task-based VEM in 32 workers (in 7 joineries and 3 furniture factories). We assessed the efficacy of vacuum extraction on hand tools and the use of vacuum cleaners instead of sweeping and dry wiping under laboratory conditions. These measures were subsequently implemented in three joinery workshops with 'high' (>4 mg m-3) and one with 'low' (joinery and furniture making were 2.5 mg m-3 [geometric standard deviations (GSD) 2.5] and 0.6 mg m-3 (GSD 2.3), respectively. In joinery workers cleaning was associated with a 3.0-fold higher (P joineries, a borderline statistically significant (P joinery workers and (to a lesser extent) furniture makers with frequent use of hand tools and cleaning being key drivers of exposure. Vacuum extraction on hand tools and alternative cleaning methods reduced workplace exposures substantially, but may be insufficient to achieve compliance with current occupational exposure limits. © The Author 2017. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

  3. [Assessment of occupational exposure to wood dust in the Polish furniture industry].

    Science.gov (United States)

    Szewczyńska, Małgorzata; Pośniak, Małgorzata

    2017-02-28

    Occupational exposure to wood dust can be responsible for many different harmful health effects, especially in workers employed in the wood industry. The assessment of wood dust adverse effects to humans, as well as the interpretation of its concentration measurements carried out to assess potential occupational exposure are very difficult. First of all, it is due to possible occurrence of different kind of wood dust in the workplace air, namely wood dust from dozens of species of trees belonging to 2 kinds of botanical gymnosperms and angiosperms, as well as to its different chemical composition. Total dust and respirable wood dust in the workplace air in the furniture industry was determined using the filtration-gravimetric method in accordance with Polish Standards PN-Z-04030-05:1991 and PN-Z-04030-06:1991. Air samples were collected based on the principles of individual dosimetry. Total dust concentrations were 0.84-13.92 mg/m3 and inhalable fraction concentrations, obtained after the conversion of total dust by applying a conversion factor of 1.59, were 1.34-22.13 mg/m3. Respirable fraction concentrations were 0.38-4.04 mg/m3, which makes approx. 25% of the inhalable fraction on average. The highest concentrations occurred in grinding and the lowest during milling processes of materials used in the manufacture of furniture. The results indicate that the share of respirable fraction in the inhalable fraction of wood dust is considerable. Due to the determination of the threshold limit value (TLV) for the inhalable fraction of wood dust, it is necessary to replace the previously used samplers for total dust with samplers that provide quantitative separation of wood dust inhalable fractions in accordance with the convention of this fraction as defined in PN-EN 481:1998. Med Pr 2017;68(1):45-60. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

  4. Dating furniture and coopered vessels without waney edge - Reconstructing historical wood-working in Austria with the help of dendrochronology.

    Science.gov (United States)

    Klein, Andrea; Nemestothy, Sebastian; Kadnar, Julia; Grabner, Michael

    In the present study, 208 furniture and 168 coopered vessels from three Austrian museums were examined. Dendrochronology was used to date objects and to extract further information such as the necessary time for seasoning, wood loss through wood-working and methods of construction. In most cases sampling was done by sanding the cross section and making digital photographs using a picture frame and measuring digitally. The dendrochronological dates of the sampled furniture range between 1524 and 1937. The group of furniture includes cupboards, chests, tables, benches, commodes and beds. In many cases furniture was artfully painted and sometimes even shows a painted year. With the help of dendrochronology it was proved that some objects had been painted for some time after construction, or had been over-painted. Most furniture, however, was painted immediately after completion. In this case, the seasoning and storage time of the boards and the wood loss due to shaping can be verified. As an average value, 14 years have passed between the dendrochronological date of the outermost ring and the painting. The time span includes time of seasoning and storage and the rings lost by wood-working. This leads, on the one hand to a short storage time of less than 10 years and on the other hand to very little wood loss due to manufacturing. Those boards being less shaped turned out to be back panels of cupboards, therefore they are recommended to be sampled for dating. Coopered vessels were dated between 1612 and 1940. There was evidence that staves were split and not sawn in many cases. The staves were often split out of the outermost part of the tree and hardly any wood was worked away which was proved by the close dendrochronological dates of the single staves of a vessel. Since there is a short time of storage and only little wood loss through wood-working, dating of objects without a waney edge becomes reasonable.

  5. Life cycle environmental impacts of different construction wood waste and wood packaging waste processing methods

    OpenAIRE

    Manninen, Kaisa; Judl, Jáchym; Myllymaa, Tuuli

    2016-01-01

    This study compared the life cycle environmental impacts of different wood waste processing methods in three impact categories: climate impact, acidification impacts and eutrophication impacts. The wood waste recovery methods examined were the use of wood waste in terrace boards made out of wood composite which replace impregnated terrace boards, incineration of wood waste in a multi-fuel boiler instead of peat and the use of wood waste in the production of particleboard in either Finland or ...

  6. APPLICATION OF NEAR INFRARED SPECTROSCOPY AND EXPLORATORY DATA ANALYSIS FOR THE IDENTIFICATION OF WOODS IN THE FURNITURE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Lucas Ferreira Bastos

    2012-07-01

    Full Text Available The paper aimed to investigate the application of infrared spectroscopy and exploratory data analysis to distinguish the different types of natural woods, contributing to the control of the origin of the materials used in the furniture industry. The near infrared spectroscopy (NIR was used for the characterization of 44 samples of 19 different types of wood, and the principal component analysis (PCA to discriminate. The proposed methodology was efficient in the separation of some samples, but further studies should be performed for the diffusion of this methodology in the routine of the furniture industry.

  7. Analysis of Usability in Furniture Production of Wood Plastic Laminated Board

    Directory of Open Access Journals (Sweden)

    Abdullah Cemil Ilçe

    2015-05-01

    Full Text Available The objective of this study was to manufacture a lightweight and easily producible wood plastic laminate (WPL board that could be used in the furniture sector. Eastern beech (Fagus orientalis L. veneer papels (A and hollow polycarbonate boards (B, both with a thickness of 4 mm, were laminated in different combinations using polyurethane (PUR and polychloroprene (PCR adhesives. The physical and mechanical properties of the WPL boards obtained were determined according to the principles specified in the EN 326-1, EN 317, EN 310, ASTM D1037, and ASTM D1761 standards. Subsequently, the specimens were compared with particle boards (PB, medium density fiberboards (MDF, and okoume plywoods (PW. According to the results, the AABAA, ABABA, and ABBBA combinations of the WPL materials had better physical properties, such as weight, water absorption, and swelling thickness, compared to the other composites. Furthermore, because the WPL materials had a high bending resistance, modulus of elasticity, and nail and screw withdrawal strength, they could be used instead of PB and MDF. The WPL material obtained within the scope of this study are suitable for furniture making.

  8. Source emission and model evaluation of formaldehyde from composite and solid wood furniture in a full-scale chamber

    Science.gov (United States)

    Liu, Xiaoyu; Mason, Mark A.; Guo, Zhishi; Krebs, Kenneth A.; Roache, Nancy F.

    2015-12-01

    This paper describes the measurement and model evaluation of formaldehyde source emissions from composite and solid wood furniture in a full-scale chamber at different ventilation rates for up to 4000 h using ASTM D 6670-01 (2007). Tests were performed on four types of furniture constructed of different materials and from different manufacturers. The data were used to evaluate two empirical emission models, i.e., a first-order and power-law decay model. The experimental results showed that some furniture tested in this study, made only of solid wood and with less surface area, had low formaldehyde source emissions. The effect of ventilation rate on formaldehyde emissions was also examined. Model simulation results indicated that the power-law decay model showed better agreement than the first-order decay model for the data collected from the tests, especially for long-term emissions. This research was limited to a laboratory study with only four types of furniture products tested. It was not intended to comprehensively test or compare the large number of furniture products available in the market place. Therefore, care should be taken when applying the test results to real-world scenarios. Also, it was beyond the scope of this study to link the emissions to human exposure and potential health risks.

  9. Sustainable wood waste management in Nigeria

    Directory of Open Access Journals (Sweden)

    Owoyemi Jacob Mayowa

    2016-09-01

    Full Text Available Wood industries produce large volumes of residues which must be utilized, marketed or properly disposed of. Heaps of wood residues are common features in wood industries throughout the year. In Nigeria, this residue is generally regarded as waste and this has led to open burning practices, dumping in water bodies or dumping in an open area which constitutes environmental pollution. Sawmills in Nigeria generated over 1,000,000 m3 of wood waste in 2010 while about 5000 m3 of waste was generated in plywood mills. Nigeria generates about 1.8 million tons of sawdust annually and 5.2 million tons of wood wastes. The impact of improper disposal of waste wood on the environment affects both the aquatic and terrestrial ecosystems. Also burning of waste wood releases greenhouse gases into the atmosphere causing various health issues. Reuse/recycling of these wood residues in Nigeria will reduce the pressure on our ever decreasing forests, reduce environmental pollution, create wealth and employment. The literature available on this subject was reviewed and this article, therefore, focuses on the various methods of wood waste disposal and its utilization in Nigerian wood industries, the effects of wood waste on the environment as well as on human health and the benefits of proper wood waste management practices.

  10. Inventory of contaminants in waste wood; Inventering av foeroreningar i returtrae

    Energy Technology Data Exchange (ETDEWEB)

    Jermer, Joeran; Ekvall, Annika; Tullin, Claes [Swedish National Testing and Research Inst., Boraas (Sweden)

    2001-03-01

    problems. Metal objects of zinc, brass and aluminium are considered to be particularly troublesome as they may plug primary air openings. PVC residues may cause considerably higher levels of chlorine in waste wood. Chemical analyses indicate that the distribution in levels of impurities varies a lot between deliveries of waste wood. Difficulties to take representative samples probably contribute to this. The knowledge of the contents of different types of waste wood (surface treated wood, preservative-treated, panels, furniture etc) in the waste wood flow is only fragmentary. Most certainly, surface treated (painted, stained etc) wood constitute the highest proportion. Preservative-treated wood, with the exception of railway sleepers and poles, is estimated to constitute approximately 5% of the waste wood flow in Sweden today and the next 25-30 years. The study has confirmed previous studies that waste wood contains a substantial proportion of fine fraction. 25-40% of the waste wood passed a sieve with a mesh size of 4 mm at screening trials. Chemical analyses indicated that the fine fraction will be the main contributor to contaminants of potassium, chlorine, sodium, zinc and lead. Further studies are suggested to focus on sorting, preparation, classification and quality assurance of waste wood.

  11. Geração de resíduos de madeira e derivados da indústria moveleira em função das variáveis de produção Generation of wood waste and derivatives on furniture industry related to production's variables

    Directory of Open Access Journals (Sweden)

    Éverton Hillig

    2009-01-01

    Full Text Available Os processos produtivos da cadeia madeira-móveis geram quantidades significativas de resíduos de madeira, os quais nem sempre têm uma destinação correta. O potencial de aproveitamento destes resíduos é significativo, quer seja como matéria-prima secundária, quer seja pelo seu potencial energético. O gerenciamento dos resíduos é um dos desafios à gestão e ao desempenho ambiental das empresas. Neste trabalho, utilizou-se a análise multivariada, com extração de componentes principais, para analisar os carregamentos de cada variável original e identificar as principais variáveis que apresentam similaridades em relação à geração de resíduos. As variáveis de produção consideradas foram: quantidade de matéria-prima consumida, número de colaboradores, número de máquinas, consumo de energia e consumo de água. Por meio de regressão linear, utilizando o método stepwise, foram obtidas as equações de estimativa dos resíduos em função das variáveis de produção originais, resultando na quantidade de resíduo gerado por classe de matéria-prima, para determinada empresa ou determinado município pesquisado. A estimativa de geração foi aplicada ao Pólo Moveleiro da Serra Gaúcha/RS.The production processes of furniture industry generate significant amounts of wood waste, which has not always a correct destination. The potential for exploitation of these residues is significant, whether as secondary raw material, whether by its energy potential. The management of this waste is one of the challenges for the management and environmental performance of companies. This work used multivariate analysis with the extraction of key components, to analyze the load of each original variable and identify key variables that have similarities in relation to the waste generation. The variables of production considered was: quantity of raw materials consumed, number of employees, number of machines, energy consumption and water

  12. Technology of Furniture Production

    OpenAIRE

    Danilova, Kseniia

    2016-01-01

    Manufacturing of furniture is one of the main processes of timber utilization. Furniture of Timberica Oy brand is made by special technology which does not allow use aggressive chemicals that can be harmful to humans, in wood processing. The furniture is made of Karelian "white" pine. Company's headquarters are located in Finland, its specialists improve and carefully controlled manufacturing process at the furniture factory in Karelia. Timberica Oy has produced furniture since 1998. They...

  13. Swedish recovered wood waste: linking regulation and contamination.

    Science.gov (United States)

    Krook, J; Mårtensson, A; Eklund, M; Libiseller, C

    2008-01-01

    In Sweden, large amounts of wood waste are generated annually from construction and demolition activities, but also from other discarded products such as packaging and furniture. A large share of this waste is today recovered and used for heat production. However, previous research has found that recovered wood waste (RWW) contains hazardous substances, which has significant implications for the environmental performance of recycling. Improved sorting is often suggested as a proper strategy to decrease such implications. In this study, we aim to analyse the impacts of waste regulation on the contamination of RWW. The occurrence of industrial preservative-treated wood, which contains several hazardous substances, was used as an indicator for contamination. First the management of RWW during 1995-2004 was studied through interviews with involved actors. We then determined the occurrence of industrial preservative-treated wood in RWW for that time period for each supplier (actor). From the results, it can be concluded that a substantially less contaminated RWW today relies on extensive source separation. The good news is that some actors, despite several obstacles for such upstream efforts, have already today proved capable of achieving relatively efficient separation. In most cases, however, the existing waste regulation has not succeeded in establishing strong enough incentives for less contaminated waste in general, nor for extensive source separation in particular. One important factor for this outcome is that the current market forces encourage involved actors to practice weak quality requirements and to rely on end-of-pipe solutions, rather than put pressure for improvements on upstream actors. Another important reason is that there is a lack of communication and oversight of existing waste regulations. Without such steering mechanisms, the inherent pressure from regulations becomes neutralized.

  14. Strategi Pemasaran Mebel Kayu Sentra Industri Kecil Pondok Bambu, Jakarta Timur (Wood Furniture Marketing Strategy on Pondok Bambu Small Industry Centre, East Jakarta

    Directory of Open Access Journals (Sweden)

    Yulius Hero

    2011-01-01

    Full Text Available Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Furniture is one of wood products to fulfill the household needs, especially for household furnishing. Wood product which is used for furniture tends to decrease because of the substitution products, i.e.: plastic, rattan, bamboo, glass, and metal. To continue their effort, small industries in Indonesia face hard problems and challanges. To solve the hard problems and challenges, then a new marketing strategy through the study on marketing strategy of small wood-furniture industry is needed. This research objectives are to know several factors which have relation toward marketing of woodfurniture and compile alternative small industrial marketing strategy of wood-furniture. Research conducts in Small Industry Centre, Pondok Bambu, East Jakarta from June to July 2008. Some tools are used in this research, such as: questionaire, calculator, camera, and stationery. The method of data collection is purposive sampling with total amount of responden is 30 people-small industry owners. Data analysis uses regression and SWOT method (Strength, Weaknesses. Opportunities, Threath. Result of the research for the regression equation of wood-furniture marketing Y= 9,001 - 0,6798 X1 - 1,4834 X2 - 1,4834 X3 + 0,4818 X4 with value R2 is equal to 51.3%. Linearity test model indicates that F Calculated is 6.57 in significat level α = 1%. Factors that influence wood-furniture marketing of sale volume are variation of product, wood-furniture price, distribution system and promotion. The relation between sale volume with variable of product variation, wood-furniture price, and distribution system is significant with negative direction. It means that smaller product variation, lower wood-furniture price, and more efficient distribution system; will effect to higher sale volume. Whereas the relation between sale volume with variable of promotion is not significant with positive direction. It

  15. Scarcity on the market for wood wastes

    International Nuclear Information System (INIS)

    De Boer, A.

    2004-01-01

    An overview is given of the market for wood wastes in the Netherlands and how this affects the targets to use biomass. Several types of biomass must be imported, not only wood wastes, but also e.g. olive stones and cacao shells [nl

  16. Kraft pulping of industrial wood waste

    Science.gov (United States)

    Aziz. Ahmed; Masood. Akhtar; Gary C. Myers; Gary M. Scott

    1998-01-01

    Most of the approximately 25 to 30 million tons of industrial wood waste generated in the United States per year is burned for energy and/or landfilled. In this study, kraft pulp from industrial wood waste was evaluated and compared with softwood (loblolly pine, Douglas-fir) and hardwood (aspen) pulp. Pulp bleachability was also evaluated. Compared to loblolly pine...

  17. Forest biomass and wood waste resources

    Science.gov (United States)

    K. Skog; P. Lebow; D.. Dykstra; P.. Miles; B.J. Stokes; R.D. Perlack; M. Buford; J. Barbour; D. McKeever

    2011-01-01

    This chapter provides estimates of forest biomass and wood waste quantities, as well as roadside costs (i.e., supply curves) for each county in the contiguous United States. Roadside price is the price a buyer pays for wood chips at a roadside in the forest, at a processing mill location in the case of mill residue, or at a landfill for urban wood wastes prior to any...

  18. A survey into process and worker's characteristics in the wood furniture industry in Songkhla Province, southern region of Thailand.

    Science.gov (United States)

    Tuntiseranee, P; Chongsuvivatwong, V

    1998-12-01

    A cross-sectional survey of the wood furniture industry was conducted in southern Thailand in February 1993. The aim was to examine the manufacturing process, occupational hazards at the workplace, workers' demographic characteristics, period of employment, incidence rate of work related injury and some reproductive history of workers. Altogether 69 managers and 1,000 workers participated in the study. There are 2 main types of wood industry, rubberwood and hardwood. The rubberwood industry is semi-automated with advanced technology, has a female-dominated workforce of 200-300 workers per factory and overseas-market orientation. The hardwood industry is based in small-scale workplaces ranging from 20 to 60 workers, domestic-market orientation and has a male-dominated workforce. Most of the workers were young, single, of low education and were high turnover rate laborforce, with arduous work and long working hours per week. Solvent was the most frequent chemical exposure. The person-year incidence of chemical exposure in female workers was higher than in male workers for every group of chemicals. The incidence of accidents was twice as high as the official rate. The standardized fertility ratio of female wood workers was only 51.6% of that of the Thai female population. There was a high abortion rate among women who became pregnant inside the wood industry compared to that among pregnancies outside the wood factory. Wood industry workers were exposed to occupational hazards and accident-prone work conditions.

  19. The ABCs of Cost Allocation in the Wood Products Industry: Applications in the Furniture Industry

    OpenAIRE

    Quesada-Pineda, Henry J.

    2010-01-01

    Discusses the basics of cost accounting and explains the strengths and weaknesses of two cost accounting techniques - the direct method and the activity-based costing method - using simple examples and applications to the furniture industry.

  20. Waste-wood-derived fillers for plastics

    Science.gov (United States)

    Brent English; Craig M. Clemons; Nicole Stark; James P. Schneider

    1996-01-01

    Filled thermoplastic composites are stiffer, stronger, and more dimensionally stable than their unfilled counterparts. Such thermoplastics are usually provided to the end-user as a precompounded, pelletized feedstock. Typical reinforcing fillers are inorganic materials like talc or fiberglass, but materials derived from waste wood, such as wood flour and recycled paper...

  1. Waste generation and utilisation in micro-sized furniture-manufacturing enterprises in Turkey.

    Science.gov (United States)

    Top, Y

    2015-01-01

    The number of small-scale businesses within most national economies is generally high, especially in developing countries. Often these businesses have a weak economic status and limited environmental awareness. The type and amount of waste produced, and the recycling methods adopted by these businesses during their operation can have negative effects on the environment. This study investigated the types of waste generated and the recycling methods adopted in micro-sized enterprises engaged in the manufacture of furniture. An assessment was also made of whether the characteristics of the enterprise had any effect on the waste recycling methods that were practised. A survey was conducted of 31 enterprises in the furniture industry in Gumushane province, Turkey, which is considered a developing economy. Surveys were undertaken via face-to-face interviews. It was found that medium-density fibreboard (MDF), and to a lesser extent, chipboard, were used in the manufacture of furniture, and two major types of waste in the form of fine dust and small fragments of board are generated during the cutting of these boards. Of the resulting composite board waste, 96.9% was used for heating homes and workplaces, where it was burnt under conditions of incomplete combustion. Enterprises were found to have adopted other methods to utilise their wastes in addition to using them as fuel. Such enterprises include those operating from a basement or first floor of a building in the cities, those continuing production throughout the year, those in need for capital and those enterprises not operating a dust-collection system. Copyright © 2014 The Author. Published by Elsevier Ltd.. All rights reserved.

  2. Analysis of ergonomic furniture made of wood and sub-products from renewable forests.

    Science.gov (United States)

    de Oliveira, Luciana Aparecida; de Souza, Amaury Paulo; Fialho, Patrícia Bhering; Minette, Luciano José; de Torres, Fernanda Freitas Costa

    2012-01-01

    The furniture ergonomic evaluation was carried out through the use of questionnaires and forms in industries. For the ergonomic product analysis, it was used the methodology "Object Ergonomics - Ergonomic System Technical Reading" (design goals and management actions), and measurements of products. The values achieved were compared with the standard dimensions, and the compliance or non-compliance of the furniture to it was assessed. In relation to the dimensions of the bed, the following variables did not comply with the norms: external and internal length, external and internal width, height and width of the sidebar and distance to the floor. The dimensions of these variables were above the recommended values. The double bed was inadequate for management actions and maintenance. Since the kitchen cabinet is a product that went through physical testing and follows national standards; the finish used is powder coating. The kitchen cabinet proved to be appropriate in all design requirements and for management actions. Both furniture pieces were inadequate, considering the difficulty for maintenance when a product or part of it was damaged. It was recommended the creation of regulatory standards for the production of safe and comfortable furniture.

  3. Nigerian Wood Waste: A Potential Resource for Economic ...

    African Journals Online (AJOL)

    ADOWIE PERE

    methods these vast amount of wood residues are often discarded ... contradict sustainable solid waste management which entails various .... waste through the production of steam in boiler super-heater .... Wood Fuels Handbook. AIEL: Italian.

  4. A national cross-sectional study in the Danish wood and furniture industry on working postures and manual materials handling.

    Science.gov (United States)

    Christensen, H; Pedersen, M B; Sjøgaard, G

    1995-04-01

    Musculoskeletal disorders constitute a major problem in the wood and furniture industry and identification of risk factors is needed urgently. Therefore, exposures to different work tasks and variation in the job were recorded based on an observation survey in combination with an interview among 281 employees working in wood working and painting departments. A questionnaire survey confirmed high frequencies of symptoms from the musculoskeletal system: The one-year prevalence of symptoms from the low back was 42% and symptoms from the neck/shoulder was 40%. The exposure was evaluated based on: (1) classification of work tasks, (2) work cycle time, (3) manual materials handling, (4) working postures, and (5) variation in the job. Among the employees 47% performed feeding or clearing of machines, 35% performed wood working or painting materials, and 18% performed various other operations. Among the employees 20% had no variation in their job while 44% had little variation. Manual materials handling of 375 different burdens was observed, which most often occurred during feeding or clearing of machines. The weight of burdens lifted was 0.5-87.0 kg, where 2% had a weight of more than 50 kg. Among the lifting conditions 30% were evaluated as implying a risk of injury. An additional risk factor was the high total tonnage lifted per day, which was estimated to range from 132 kg to 58,800 kg. Working postures implied a risk of injury due to prolonged forward and lateral flexions of the neck, which was seen most frequently during wood working or painting materials. These data substantiate the finding that work tasks mainly during feeding or clearing of machines imply a risk of injury to the low back and a risk of injury to the neck and shoulder area mainly during wood working or painting materials. Optimal strategies for job redesign may be worked out by using these data in order to prevent occupational musculoskeletal disorders.

  5. Eco-innovation of a wooden childhood furniture set: an example of environmental solutions in the wood sector.

    Science.gov (United States)

    González-García, Sara; García Lozano, Raúl; Moreira, M Teresa; Gabarrell, Xavier; Rieradevall i Pons, Joan; Feijoo, Gumersindo; Murphy, Richard J

    2012-06-01

    The environmental profile of a set of wood furniture was carried out to define the best design criteria for its eco-design. A baby cot convertible into a bed, a study desk and a bedside table were the objects of study. Two quantitative and qualitative environmental approaches were combined in order to propose improvement alternatives: Life Cycle Assessment (LCA) and Design for Environment (DfE). In the first case Life Cycle Assessment (LCA) was applied to identify the hot spots in the product system. As a next step, LCA information was used in eco-briefing to determine several improvement alternatives. A wood products company located in Catalonia (NE Spain) was assessed in detail, dividing the process into three stages: assembly, finishing and packaging. Ten impact categories were considered in the LCA study: abiotic depletion, acidification, eutrophication, global warming, ozone layer depletion, human toxicity, fresh water aquatic ecotoxicity, marine aquatic ecotoxicity, terrestrial ecotoxicity and photochemical oxidant formation. Two processes can be considered the key environmental factors: the production of the wooden boards and electricity, with contributions of 45-68% and 14-33% respectively depending on the impact categories. Subsequently, several improvement alternatives were proposed in the eco-design process (DfE) to achieve reductions in a short-medium period of time in the environmental impact. These eco-design strategies could reduce the environmental profile of the setup by 14%. The correct methodological adaptation of the concept of eco-briefing, as a tool for communication among environmental technicians and designers, the simplification of the analytical tool used and the LCA, could facilitate the environmental analysis of a product. The results obtained provide information that can help the furniture sector to improve their environmental performance. Copyright © 2012 Elsevier B.V. All rights reserved.

  6. The use of wood waste for energy production

    International Nuclear Information System (INIS)

    Karlopoulos, E.; Pavloudakis, F.

    1999-01-01

    The paper presents some technical aspects and management issues of wood waste reuse end disposal. It refers to the Greek and European legislation which determines the framework for rational and environmental friendly practices for woos waste management. It refers also to the wood waste classification systems and the currently applied methods of wood waste disposal and reuse. Emphasis is given to the wood waste-to-energy conversion system, particularly to the pretreatment requirements, the combustion techniques, and the environmental constrains. Finally, the decision making process for the investments in the wood waste firing thermal units is discussed

  7. Eco-efficiency Analysis of Furniture Product Using Life Cycle Assessment

    OpenAIRE

    Ika Rinawati Dyah; Sriyanto; Puspita Sari Diana; Cantya Prayodha Andana

    2018-01-01

    Furniture is one of Indonesia’s main commodities strategically role in economic growth and employment in Indonesia. In their production process there many wastes resulted, such as such as sawdust, cuttings - pieces of wood, components that do not conform to specifications and the edges of wood from a log. Contrast with requirement of timber for furniture industries, availability of raw material sources decrease because of limited forest areas. Beside that, using electricity and chemical mater...

  8. Identifying and prioritizing indicators and effective solutions to optimization the use of wood in construction classical furniture by using AHP (Case study of Qom

    Directory of Open Access Journals (Sweden)

    Mohammad Ghofrani

    2017-02-01

    Full Text Available AbstractThe aim of this study was to identify and prioritize the indicators and provide effective solutions to optimize the use of wood in construction classical furniture using the analytic hierarchy process (case study in Qom. For this purpose, studies and results of other researchers and interviews with experts, the factors affecting the optimization of wood consumption were divided into 4 main categories and 23 sub-indicators. The importance of the sub after getting feedback furniture producers were determined by AHP. The results show that the original surface design and human resources are of great importance. In addition, among 23 sub-effective optimization of the use of wood in construction classical furniture, ergonomics, style, skill training and inlaid in classical furniture industry in order to weight the value of 0/247, 0/181, 0/124 and 0/087 are of paramount importance and the method of use of force specialist solutions were a priority.

  9. Assessment of the wood waste resource and its position in the wood / wood-energy sector - Synthesis

    International Nuclear Information System (INIS)

    Guinard, Ludovic; Deroubaix, Gerard; Roux, Marie-Lise; Levet, Anne-Laure; Quint, Vincent

    2015-04-01

    The first objective of this study is to obtain a better knowledge of the 'wood wastes' issue, to propose a photography of the wood waste sector (productions, trades, consumptions), and then to elaborate different prospective scenarios on the use of wood waste volumes while taking into account possible evolutions on the medium or short term of the regulation and market of the wood/wood energy sector. The considered wastes come from industrial production, from the use of wood-based products, and from the end of life of products potentially containing wood. The authors present bibliographical sources and the adopted methodology, briefly describe the 'wood waste' system with its actors, and then report their assessment of wood wastes. They propose a global assessment as well as detailed assessments with respect to waste origins: wood trade and distribution, industries, craft, households and communities, building sector, public and private tertiary sector, packaging. They also address the collection and management of wood wastes by public services, and present the different types of valorisation (panel fabrication, energy, and others). They discuss exports, and then present different scenarios: a trend-based scenario, and two prospective scenarios with a priority to energetic valorisation or to material valorisation of wood wastes. These scenarios are compared

  10. Effects of species information and furniture price on consumer preferences for selected woods

    Science.gov (United States)

    Matthew Bumgardner; David Nicholls; Geoffrey Donovan

    2007-01-01

    Changing consumer tastes and species availability are influencing the design and manufacture of hardwood products. In addition, the globalization of wood product markets is exposing U.S. consumers to new species. This research evaluates consumer preferences for six domestic wood species--three from the eastern United States and three from the western United States. The...

  11. The use of urban wood waste as an energy resource

    Science.gov (United States)

    Khudyakova, G. I.; Danilova, D. A.; Khasanov, R. R.

    2017-06-01

    The capabilities use of wood waste in the Ekaterinburg city, generated during the felling of trees and sanitation in the care of green plantations in the streets, parks, squares, forest parks was investigated in this study. In the cities at the moment, all the wood, that is removed from city streets turns into waste completely. Wood waste is brought to the landfill of solid household waste, and moreover sorting and evaluation of the quantitative composition of wood waste is not carried out. Several technical solutions that are used in different countries have been proposed for the energy use of wood waste: heat and electrical energy generation, liquid and solid biofuel production. An estimation of the energy potential of the city wood waste was made, for total and for produced heat and electrical energy based on modern engineering developments. According to our estimates total energy potential of wood waste in the city measure up more 340 thousand GJ per year.

  12. An emissions audit of a biomass combustor burning treated wood waste

    International Nuclear Information System (INIS)

    Jackson, P.M.; Jones, H.H.; King, P.G.

    1993-01-01

    This report describes the Emissions Audit carried out on a Biomass Combustor burning treated wood waste at the premises of a furniture manufacturer. The Biomass Combustor was tested in two firing modes; continuous fire and modulating fire. Combustion chamber temperatures and gas residence times were not measured. Boiler efficiencies were very good at greater than 75% in both tests. However, analysis of the flue gases indicated that improved efficiencies are possible. The average concentrations of CO (512mgm -3 ) and THC (34mgm -3 ) for Test 1 were high, indicating that combustion was poor. The combustor clearly does not meet the requirements of the Guidance Note for the Combustion of Wood Waste. CO 2 and O 2 concentrations were quite variable showing that combustion conditions were fairly unstable. Improved control of combustion should lead to acceptable emission concentrations. (Author)

  13. Characterization and potential recycling of home building wood waste

    Science.gov (United States)

    Philip A. Araman; D.P. Hindman; M.F. Winn

    2010-01-01

    Construction waste represents a significant portion of landfill waste, estimated as 17% of the total waste stream. Wood construction waste of a 2000 square foot single family home we found to be 1500-3700 lbs of solid-sawn wood, and 1000-1800 lbs of engineered wood products (EWP). Much of the solid-sawn lumber and EWPs could be recycled into several products. Through a...

  14. Longitudinal lung function decline and wood dust exposure in the furniture industry.

    Science.gov (United States)

    Jacobsen, G; Schlünssen, V; Schaumburg, I; Taudorf, E; Sigsgaard, T

    2008-02-01

    The aim of the present study was to investigate the relationship between change in lung function and cumulative exposure to wood dust. In total, 1,112 woodworkers (927 males, 185 females) and 235 reference workers (104 males, 185 females) participated in a 6-yr longitudinal study. Forced expiratory volume in one second (FEV(1)), forced vital capacity (FVC), height and weight were measured, and questionnaire data on respiratory symptoms, wood dust exposure and smoking habits were collected. Cumulative inhalable wood dust exposure was assessed using a study-specific job exposure matrix and exposure time. The median (range) for cumulative wood dust exposure was 3.75 (0-7.55) mg x year x m(-3). A dose-response relationship between cumulative wood dust exposure and percent annual decrease in FEV(1) was suggested for female workers. This was confirmed in a linear regression model adjusted for confounders, including smoking, height and age. An additional difference of -14.50 mL x yr(-1) and -27.97 mL x yr(-1) was revealed for females exposed to 3.75-4.71 mg x yr x m(-3) or to >4.71 mg x yr x m(-3), respectively, compared with non-/low-exposed females. For females, a positive trend between wood dust exposure and the cumulative incidence proportion of FEV(1)/FVC <70% was suggested. In conclusion, in the present low-exposed cohort, female woodworkers had an accelerated decline in lung function, which may be clinically relevant.

  15. An assessment of management practices of wood and wood-related wastes in the urban environment

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    The US Environmental Protection Agency estimates that yard waste{sup 1} accounts for approximately 16% of the municipal solid waste (MSW) stream (US EPA, 1994). Until recently, specific data and related information on this component of the (MSW) stream has been limited. The purposes of this study, phase two of the three-phase assessment of urban wood waste issues, are to assess and describe current alternatives to landfills for urban wood waste management; provide guidance on the management of urban wood waste to organizations that produce or manage wood waste; and clarify state regulatory and policy positions affecting these organizations. For this study, urban wood waste is defined as solid waste generated by tree and landscape maintenance services (public and private). Urban wood waste includes the following materials: unchipped mixed wood, unchipped logs, and unchipped tops and brush; clearing and grubbing waste; fall leaves and grass clippings; and chips and whole stumps. Construction and demolition debris and consumer-generated yard waste are not included in this study. Generators of urban wood waste include various organizations; municipal, county, and commercial tree care divisions; nurseries, orchards, and golf courses; municipal park and recreation departments; and electric and telephone utility power line maintenance, excavator and land clearance, and landscape organizations. (1) US EPA defines yard waste as ''yard trimmings'' which includes ''grass, leaves and tree brush trimmings from residential, institutional, and commercial sources.''

  16. USE OF CANDEIA’S (Eremanthus erythropappus WASTE WOOD

    Directory of Open Access Journals (Sweden)

    Rosimeire Cavalcante dos Santos

    2008-09-01

    Full Text Available The candeia (Eremanthus erythropappus is a native forest species with multiple uses and specially utilized as essential oils source. The use of the candeia´s waste wood after oil extraction for particle panels production becomes a viable alternative, avoiding environmental problems and increasing the availability of these products in the consuming market. This work verified the viability of producing wood-cement panels using waste wood generated after the extraction of candeia’s oil, in association with pinus and eucalipto woods. The experiment was installed according to a completely randomized design with three repetitions. The treatments were arranged according to a factorial 2 x 3 scheme (two wooden species and three replacement percentages of the woods by candeia’s waste. The results of the physical and mechanical property tests showed high potentiality of candeia waste wood, after oil extraction, in association with pinus and eucalipto wood for manufacturing wood-cement panels.

  17. Effects of Different Wood Preservatives on The Some Physical Properties of Wood Species Used in Furniture and Building Industry

    Directory of Open Access Journals (Sweden)

    Abdi Atılgan

    2012-04-01

    Full Text Available This study aims to determine the combustion, density values of Fagus and Pinus sylvestris’ woods impregranted with Ammonium tetra fluoro borate (1 - 3 % and the mixture of cement and borax (6 % – 9 % according to ASTM-D 1413-76 standards. In the combustion test carried out according to ASTM-D 160-50, the combustion resulted from flame, the self-combustion and the combustion as glowing processes were completed and the amount of lux, combustion duration, decomposition and ash were determined. According to experimental results, it is determined that Fogus’ wood has the highest retention (42,43 kg/m3 in the mixture of cement and borax 9 %, combustion tempature (587 o C in the mixture of cement and borax 6 % , the value of lux (267 lux in the the combustion as glowing and Pinus sylvestris’ wood has the longest combustion duration (29,03 min. Ammonium tetrafluoro borate 1%, the most weight loss (94 %.

  18. Longitudinal lung function decline and wood dust exposure in the furniture industry

    DEFF Research Database (Denmark)

    Jacobsen, G.; Schluenssen, V.; Schaumburg, I.

    2008-01-01

    , including smoking, height and age. An additional difference of -14.50 mL.yr(-1) and -27.97 mL.yr(-1) was revealed for females exposed to 3.75-4.71 mg.yr.m(-3) or to >4.71 mg-yr.m(-3), respectively, compared with non-/Iow-exposed females. For females, a positive trend between wood dust exposure...

  19. Longitudinal lung function decline and wood dust exposure in the furniture industry

    DEFF Research Database (Denmark)

    Jacobsen, Gitte; Schlünssen, V; Schaumburg, I

    2007-01-01

    for confounders, including smoking, height and age. An additional difference of -14.50 mL x yr(-1) and -27.97 mL x yr(-1) was revealed for females exposed to 3.75-4.71 mg x yr x m(-3) or to >4.71 mg x yr x m(-3), respectively, compared with non-/low-exposed females. For females, a positive trend between wood dust...

  20. Gasification of waste from furniture industries for generation of sustainable energy

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, J.L.; Silva, J.N.; Pereira, E.G.; Machado, C.S.; Da Conceicao, M.; Bezerra, T. [Federal Univ. of Vicosa, Minas Gerais State (Brazil)

    2010-07-01

    The global interest in renewable energy is attributed to the decline in fossil fuel sources and the need for technical, economic, social and environmental sustainability. This study focused on the new techniques that have been developed for the use of biomass for energy from wood wastes from the forest-based industry. As an energy source, wood waste contributes positively to the environment by reducing environmental problems related to contamination of soil, air and water through improper disposal of waste. Biomass gasification has the advantage of converting biomass into a combustible gas that can be used for heat generation, electricity and synthesis of chemicals. Syngas produced from gasification of eucalyptus residues has significant potential, with an average High Heating Value of 6.60 MJ/m{sup 3}, and regular composition during the process, with predominance of carbon monoxide, followed by hydrogen, carbon dioxide and methane.

  1. Wood waste: A disposal problem or an opportunity?

    International Nuclear Information System (INIS)

    Vajda, P.

    1989-01-01

    The utilization of wood wastes in North America is reviewed, with a focus on the wood products industry and markets. On the whole, wood mill residues in North America have always been utilized except for a period from the 1940s to the 1970s oil crisis. In the latter period, low cost electric power and hydrocarbon fuels rendered uneconomical the use of wood wastes as fuel. As a response to the problem of disposing these wastes, a number of innovations occurred in that period, including the use of wood chips for manufacturing pulp and particleboard, and the use of sawdust and shavings for manufacturing hardboard and medium density fiberboard. Uses for bark, except as fuel, have not been successfully developed. Since the 1970s, wood waste in the USA is essentially all used for composite board products and fuel. This is also true in eastern Canada, which is close to the wood products markets and which has fairly high oil and gas costs. However, in western Canada, low energy costs and small internal markets have led to a serious wood waste disposal problem. A survey of wood waste supply and demand shows large surpluses in mill residues in western Canada and some remote locations in northern Ontario and Quebec. The Pacific Rim countries are identified as a potential market for western Canadian composite board production. The use of other sources of wood waste (forestry or logging residues, which are costly to collect, and municipal construction waste) is briefly discussed

  2. Contact allergy to finished woods in furniture and furnishings: a small allergic contact dermatitis epidemic to western red cedar in sauna interior decoration.

    Science.gov (United States)

    Huilaja, L; Kubin, M E; Riekki, R

    2016-01-01

    Allergic contact dermatitis caused by wood dust remains uncommon and most cases are occupational. Contact allergy to finished wooden products is even more rare and only few cases of contact dermatitis to wooden furnishings and furniture are described. During 2012-2014 surprisingly many patients with dermatitis associated to sauna baths were referred to our clinic. We report three novel cases with allergic contact dermatitis to western red cedar due to exposure during sauna baths. Three cases of non-occupational contact dermatitis to western red cedar were confirmed by patch testing. Allergic contact dermatitis to interior decoration or furniture is a rarity, but can be induced by novel exposures, like western red cedar in sauna interior decoration. © 2015 European Academy of Dermatology and Venereology.

  3. Coal and wood fuel for electricity production: An environmentally sound solution for waste and demolition wood

    Energy Technology Data Exchange (ETDEWEB)

    Penninks, F.W.M. [EPON, Zwolle (Netherlands)

    1997-12-31

    Waste wood from primary wood processing and demolition presents both a problem and a potential. If disposed in landfills, it consumes large volumes and decays, producing CH{sub 4}, CO{sub 2} and other greenhouse gases. As an energy source used in a coal fired power plant it reduces the consumption of fossil fuels reducing the greenhouse effect significantly. Additional advantages are a reduction of the ash volume and the SO{sub 2} and NO{sub x} emissions. The waste wood requires collection, storage, processing and burning. This paper describes a unique project which is carried out in the Netherlands at EPON`s Gelderland Power Plant (635 MW{sub e}) where 60 000 tonnes of waste and demolition wood will be used annually. Special emphasis is given to the processing of the powdered wood fuel. Therefore, most waste and demolition wood can be converted from an environmental liability to an environmental and economic asset. (author)

  4. Coal and wood fuel for electricity production: An environmentally sound solution for waste and demolition wood

    Energy Technology Data Exchange (ETDEWEB)

    Penninks, F W.M. [EPON, Zwolle (Netherlands)

    1998-12-31

    Waste wood from primary wood processing and demolition presents both a problem and a potential. If disposed in landfills, it consumes large volumes and decays, producing CH{sub 4}, CO{sub 2} and other greenhouse gases. As an energy source used in a coal fired power plant it reduces the consumption of fossil fuels reducing the greenhouse effect significantly. Additional advantages are a reduction of the ash volume and the SO{sub 2} and NO{sub x} emissions. The waste wood requires collection, storage, processing and burning. This paper describes a unique project which is carried out in the Netherlands at EPON`s Gelderland Power Plant (635 MW{sub e}) where 60 000 tonnes of waste and demolition wood will be used annually. Special emphasis is given to the processing of the powdered wood fuel. Therefore, most waste and demolition wood can be converted from an environmental liability to an environmental and economic asset. (author)

  5. Pretreatment Characteristics of Waste Oak Wood by Ammonia Percolation

    Science.gov (United States)

    Kim, Jun-Seok; Kim, Hyunjoon; Lee, Jin-Suk; Lee, Joon-Pyo; Park, Soon-Chul

    A log of waste oak wood collected from a Korean mushroom farm has been tested for ammonia percolation pretreatment. The waste log has different physical characteristics from that of virgin oak wood. The density of the waste wood was 30% lower than that of virgin oak wood. However, there is little difference in the chemical compositions between the woods. Due to the difference in physical characteristics, the optimal pretreatment conditions were also quite different. While for waste oak the optimum temperature was determined to be 130°C, for virgin oak wood the optimum pretreatment was only achieved at 170°C. Presoaking for 12 h with ammonia solution before pretreatment was helpful to increase the delignification efficiency.

  6. Waste-wood resource supply assessment. Final report

    International Nuclear Information System (INIS)

    1991-08-01

    The report documents and analyzes the availability and supply of wood waste in New York State to determine the type and amount currently generated to estimate its potential future use as a fuel. Detailed, current information is included on the availability, quantity and price of wood waste. Topics include wood waste markets; the harvesting and supply infrastructure; current and project prices; competing markets; environmental impacts of harvesting, processing and burning wood waste for fuel; and factors affecting long-term availability and supply. New York State's waste wood resource was evaluated to complete the Energy Authority's recent investigation of the potential role of wood in producing electric power. In 1989 approximately 11.8 million tons of wood waste were generated in New York State. More than 8 million tons or 68 percent, were disposed of by municipal solid waste and construction and demolition debris facilities. Just under 3.8 million tons or 32 percent, were reused and/or recycled. More than 25.7 million tons of wood waste could be available annually for fuel. Of the amount, more than 17.2 million tons per year, or 67 percent, could be produced by silvicultural activities that improve the health and productivity of forests

  7. Combustion of Waste Wood. Second phase of the collaboration project on waste wood combustion

    International Nuclear Information System (INIS)

    Andersson, Annika; Andersson, Christer; Eriksson, Jan; Hemstroem, Bengt; Jungstedt, Jenny; Kling, Aasa; Bahr, Bo von; Ekvall, Annika; Eskilsson, David; Tullin, Claes; Harnevie, Henrik; Sieurin, Jan; Keihaes, Juha; Mueller, Christian; Berg, Magnus; Wikman, Karin

    2003-08-01

    Combustion of waste wood has during the last decade increased dramatically and this has resulted in a number of Swedish plants using this fuel, e.g. Handeloe P11 (Norrkoeping) and ldbaecken P3 (Nykoeping), and yet other plants that are under construction (e.g. Nynaeshamn). The experience from these plants are that waste wood combustion results in a number of operational problems. To some extent these problems are different compared with the problems related to combustion of other biofuels but the situation is not directly comparable to waste incinerators. The problems are mainly related to slagging and fouling of heat exchanger surfaces and accelerated corrosion at relatively low temperature compared to the situation for ordinary biofuels. In some cases an increase in the emissions of specific substances can also result in difficulties to fulfil the EC-directive on waste combustion. Within previous projects the main problems related to combustion of waste wood have been identified and to some extent the cause of these problems has been clarified. One result of this reported investigation is a deeper understanding of the actual causes of these problems. However, the most important result is a number of recommendations for different measures on how to achieve disturbance-free combustion of waste wood. These recommendations actually summarises the most important possible solutions on how to achieve a disturbance-free operation and a lower maintenance cost for boilers combusting waste wood and can thereby be regarded as a short summery of the whole project: 1) Improving fuel quality by Improved sorting at the source and Sieving of the fuel -> Reducing the amount of metals and chlorine and Separation of fines and thereby reducing the amount of metals. 2) Combustion modifications by Avoiding reducing conditions at the heat exchanger surfaces -> Minimising slagging, fouling and corrosion. 3) Additives or co-combustion by Addition of sulphur with the fuel; Injection of

  8. Marketing Hardwoods to Furniture Producers

    Science.gov (United States)

    Steven A. Sinclair; Robert J. Bush; Philip A. Araman

    1989-01-01

    This paper discusses some of the many problems in developing marketing programs for small wood products manufacturers. It examines the problems of using price as a dominant means for getting and attracting customers. The marketing of hardwood lumber to furniture producers is then used as an example. Data from 36 furniture lumber buyers is presented to illustrate...

  9. Immunoglobulin E-mediated sensitization to pine and beech dust in relation to wood dust exposure levels and respiratory symptoms in the furniture industry.

    Science.gov (United States)

    Schlünssen, Vivi; Kespohl, Sabine; Jacobsen, Gitte; Raulf-Heimsoth, Monika; Schaumburg, Inger; Sigsgaard, Torben

    2011-03-01

    Wood dust exposure may cause Immunoglobulin E (IgE)-mediated allergic diseases. Our objectives were to estimate pine and beech dust sensitization rates among woodworkers and a reference group, explore the association between exposure and sensitization and between sensitization and respiratory symptoms, and finally investigate the impact of proteinogenic specific IgE (sIgE) epitopes on respiratory symptoms. In a Danish study among 52 furniture factories and 2 reference factories, we evaluated the workers' asthma and rhinitis status using questionnaires and blood samples collected from 1506 woodworkers and 195 references. Workers with asthma symptoms (N=298), a random study sample (N=399) and a random rhinitis sample (N=100) were evaluated for IgE-mediated sensitization to pine and beech dust. The prevalence of pine and beech sensitization among current woodworkers was 1.7 and 3.1%, respectively. No differences in sensitization rates were found between woodworkers and references, but the prevalence of wood dust sensitization was dose-dependently associated with the current level of wood dust exposure. No relation was observed between wood dust sensitization per se and respiratory symptoms. Only symptomatic subjects had proteinogenic IgE epitopes to pine. Increased odds ratios for sIgE based on proteinogenic epitopes to beech and respiratory symptoms were found, although they were not statistically significant. Sensitization rates to pine and beech were the same for woodworkers and references but dependent on the current wood dust exposure level. The importance of beech and pine wood sensitization is limited, but may be of clinical significance for a few workers if the IgE epitopes are proteinogenic.

  10. Wood Dust

    Science.gov (United States)

    Learn about wood dust, which can raise the risk of cancers of the paranasal sinuses and nasal cavity. High amounts of wood dust are produced in sawmills, and in the furniture-making, cabinet-making, and carpentry industries.

  11. Determinants of wood dust exposure in the Danish furniture industry--results from two cross-sectional studies 6 years apart.

    Science.gov (United States)

    Schlünssen, Vivi; Jacobsen, Gitte; Erlandsen, Mogens; Mikkelsen, Anders B; Schaumburg, Inger; Sigsgaard, Torben

    2008-06-01

    This paper investigates determinants of wood dust exposure and trends in dust level in the furniture industry of Viborg County, Denmark, using data from two cross-sectional studies 6 years apart. During the winter 1997/1998, 54 factories were visited (hereafter study 1). In the winter 2003/2004, 27 factories were revisited, and personal dust measurements were repeated. In addition, 14 new factories were included (hereafter study 2). A total of 2303 woodworkers participated in study 1, and 2358 measurements from 1702 workers were available. From study 2, 1581 woodworkers participated and 1355 measurements from 1044 workers were available. Information on occupational variables describing potential determinants of exposures like work task, exhaust ventilation, enclosure and cleaning procedures were collected. A total of 2627 measurements and 1907 persons were included in the final mixed model in order to explore determinants of exposure and trends in dust level. The overall inhalable wood dust concentration (geometric means (geometric standard deviation)) has decreased from 0.95 mg/m(3) (2.05) in study 1 to 0.60 mg/m(3) (1.63) in study 2, representing a 7% annual decrease in dust concentration, which was confirmed in the mixed model. From study 1 to study 2 there has been a change towards less manual work and more efficient cleaning methods, but on the contrary also more inadequate exhaust ventilation systems. The following determinants were found to 'increase' dust concentration: sanding; use of compressed air; use of full-automatic machines; manual work; cleaning of work pieces with compressed air; kitchen producing factories and small factories (furniture industry in Viborg County, further improvements are possible. There should be more focus on improved exhaust ventilation, professional cleaning methods and avoiding use of compressed air.

  12. Determinants of Wood Dust Exposure in the Danish Furniture Industry—Results from Two Cross-Sectional Studies 6 Years Apart

    Science.gov (United States)

    Schlünssen, Vivi; Jacobsen, Gitte; Erlandsen, Mogens; Mikkelsen, Anders B.; Schaumburg, Inger; Sigsgaard, Torben

    2008-01-01

    Objectives: This paper investigates determinants of wood dust exposure and trends in dust level in the furniture industry of Viborg County, Denmark, using data from two cross-sectional studies 6 years apart. Methods: During the winter 1997/1998, 54 factories were visited (hereafter study 1). In the winter 2003/2004, 27 factories were revisited, and personal dust measurements were repeated. In addition, 14 new factories were included (hereafter study 2). A total of 2303 woodworkers participated in study 1, and 2358 measurements from 1702 workers were available. From study 2, 1581 woodworkers participated and 1355 measurements from 1044 workers were available. Information on occupational variables describing potential determinants of exposures like work task, exhaust ventilation, enclosure and cleaning procedures were collected. A total of 2627 measurements and 1907 persons were included in the final mixed model in order to explore determinants of exposure and trends in dust level. Results: The overall inhalable wood dust concentration (geometric means (geometric standard deviation)) has decreased from 0.95 mg/m3 (2.05) in study 1 to 0.60 mg/m3 (1.63) in study 2, representing a 7% annual decrease in dust concentration, which was confirmed in the mixed model. From study 1 to study 2 there has been a change towards less manual work and more efficient cleaning methods, but on the contrary also more inadequate exhaust ventilation systems. The following determinants were found to ‘increase’ dust concentration: sanding; use of compressed air; use of full-automatic machines; manual work; cleaning of work pieces with compressed air; kitchen producing factories and small factories (furniture industry in Viborg County, further improvements are possible. There should be more focus on improved exhaust ventilation, professional cleaning methods and avoiding use of compressed air. PMID:18407937

  13. Pollution-free combustion of waste wood in Swiss joineries

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    The exploitation of scrap wood for heat generation in the wood processing industry makes sense not only in the context of energy conservation but also on environmental grounds. Existing energy requirements can be provided by renewable energy sources, relieving the burden on the public waste disposal facility. The wood-fired heating plant for a joinery in Pratteln, Switzerland consumes 150 to 180 tonnes of waste wood per year, enabling approximately 80 tonnes of heating oil to be saved. The heat produced is used in a local scheme to heat the joinery and adjacent housing. A new fibrous filter system for the retention of fine particles was installed, enabling the particle concentration in the exhaust to be reduced from 292 mg/m{sup 3} to 24 mg/m{sup 3}. (UK)

  14. Furniture design

    CERN Document Server

    Smardzewski, Jerzy

    2015-01-01

    Maximizing reader insights into the principles of designing furniture as wooden structures, this book discusses issues related to the history of furniture structures, their classification and characteristics, ergonomic approaches to anthropometric requirements and safety of use. It presents key methods and highlights common errors in designing the characteristics of the materials, components, joints and structures, as well as looking at the challenges regarding developing associated design documentation. Including analysis of how designers may go about calculating the stiffness and endurance of parts, joints and whole structures, the book analyzes questions regarding the loss of furniture stability and the resulting threats to health of the user, putting forward a concept of furniture design as an engineering processes. Creating an attractive, functional, ergonomic and safe piece of furniture is not only the fruit of the work of individual architects and artists, but requires an effort of many people working ...

  15. State-of-the-art of the European regulation on wood wastes and wood ashes valorization. Synthesis

    International Nuclear Information System (INIS)

    Mousseau, S.

    2007-01-01

    This study has the objective of comparing the regulations of 10 European countries with that of France, in relation to the classification and recycling of wood waste, in particular lightly treated wood, as well as recycling of wood ash. The first part relating to wood waste presents a detailed analysis by country as well as a summary, on the one hand, of the various sectors for recycling waste wood and, on the other, the emission limits for their energy recovery. Generally, there is a distinction between waste covered by the incineration directive, and the others, without any particular category for lightly treated wood. However, recommendations emerge from this that are based essentially on the regulations or guidelines observed in Germany, Austria and the United Kingdom. The second part relating to wood ash also a presents a detailed analysis by country as well as a summary of the various sectors of recycling and limit values for spreading. Ash is generally considered as waste, and is recycled on a case-by case basis. Only Germany and Austria have clearly integrated wood ash in their regulatory framework. Overall this study shows the need for uniform regulation at European level, establishing environment requirements for recycling wood waste and wood ash, in order to encourage development of the use of biomass

  16. Electrodialytic remediation of CCA treated waste wood in pilot scale

    DEFF Research Database (Denmark)

    Pedersen, Anne Juul; Christensen, Iben Vernegren; Ottosen, Lisbeth M.

    2005-01-01

    study the utility of the method Electrodialytic Remediation was demonstrated for handling of CCA treated waste wood in pilot scale. The electrodialytic remediation method, which uses a low level DC current as the cleaning agent, combines elektrokinetic movement of ions in the wood matrix with the princi......-ples of electrodialysis. It has previously been shown that it is possible to remove Cu, Cr and As from CCA treated wood using electrodialytic remediation in laboratory scale (Ribeiro et al., 2000; Kristensen et al., 2003), but until now, the method had not been studied in larger scale. The pilot scale plant used...... in this study was designed to contain up to 2 m3 wood chips. Six remediation experiments were carried out. In these experiments, the process was up-scaled stepwise by increasing the distance between the electrodes from initially 60 cm to fi-nally 150 cm. The remediation time was varied between 11 and 21 days...

  17. Eco-efficiency Analysis of Furniture Product Using Life Cycle Assessment

    Science.gov (United States)

    Rinawati, Dyah Ika; Sriyanto; Sari, Diana Puspita; Prayodha, Andana Cantya

    2018-02-01

    Furniture is one of Indonesia's main commodities strategically role in economic growth and employment in Indonesia. In their production process there many wastes resulted, such as such as sawdust, cuttings - pieces of wood, components that do not conform to specifications and the edges of wood from a log. Contrast with requirement of timber for furniture industries, availability of raw material sources decrease because of limited forest areas. Beside that, using electricity and chemical material in furniture production process have impact to environment. This study aim to assess the eco-cost and eco-efficiency ratio of the product so strategic recommendations to improve the eco-efficiency of products can be designed. The results of data processing showed the environmental costs of the furniture production process amount Rp 30.887.84. Eco-efficiency index of furniture products studied was 4,79 with the eco-efficiency ratio of 79,12%. This result means that the measured furniture products already profitable and sustainable, as well as its production process is already fairly efficient. However, improved performance of the production process can still be done to improve the eco-efficiency by minimizing the use of raw materials.

  18. Eco-efficiency Analysis of Furniture Product Using Life Cycle Assessment

    Directory of Open Access Journals (Sweden)

    Ika Rinawati Dyah

    2018-01-01

    Full Text Available Furniture is one of Indonesia’s main commodities strategically role in economic growth and employment in Indonesia. In their production process there many wastes resulted, such as such as sawdust, cuttings - pieces of wood, components that do not conform to specifications and the edges of wood from a log. Contrast with requirement of timber for furniture industries, availability of raw material sources decrease because of limited forest areas. Beside that, using electricity and chemical material in furniture production process have impact to environment. This study aim to assess the eco-cost and eco-efficiency ratio of the product so strategic recommendations to improve the eco-efficiency of products can be designed. The results of data processing showed the environmental costs of the furniture production process amount Rp 30.887.84. Eco-efficiency index of furniture products studied was 4,79 with the eco-efficiency ratio of 79,12%. This result means that the measured furniture products already profitable and sustainable, as well as its production process is already fairly efficient. However, improved performance of the production process can still be done to improve the eco-efficiency by minimizing the use of raw materials.

  19. Waste wood incineration: long-lasting, environment-friendly and CO2-neutral

    International Nuclear Information System (INIS)

    Bouma, J.W.J.

    1993-01-01

    The economic aspects of energy production from waste wood are evaluated. Heating systems based on the incineration of wood have been considerably improved recently. Several aspects of the incineration of waste wood are reviewed: the implications with regard to the greenhouse effect, the calorific value of wood, the incineration process, and the cost price calculation of energy production by waste wood incineration. In conclusion is stated that energy production by waste wood incineration is a valuable economic alternative for heat production by oil products, especially in view of the current anti-pollution taxes in Belgium. (A.S.)

  20. Consideration of the energetic use of waste wood versus re-use of materials

    International Nuclear Information System (INIS)

    Bergsma, G.C.; Sas, H.

    1997-01-01

    Recycling of wood wastes to chipboard is compared with the combustion of waste wood in combination with high-efficient energy recovery. Both options show much better environmental effects than the disposal of wood wastes. The differences between the environmental effects of the first two options can be neglected. The reprocessing of wood wastes to chipboard results in a decrease of the production of gypsum board. That benefit is equal to the benefit of cocombustion of wood wastes in a coal-fired power plant, i.e. saving coal. 18 refs

  1. Waste from glued wood - A base for new products and/or bio-fuel?

    OpenAIRE

    Bjurman, Therese

    2009-01-01

      The Swedwood Company is a supplier to IKEA of wood furniture. They have grown larger concurrently with IKEA and at present they have 47 production units spread over twelve countries of which most are located in Eastern Europe. One of the factories is Zbaszynek which is located in Poland. They manufacture so called board-on-frame furniture. A board-on-frame is basically made out of particle board frames which are filled with special design paper that enfolds air. The frames are then covered ...

  2. PROTECTIVE TREATMENT OF WOOD IMPREGNATING COMPOSITION OF PETROCHEMICAL WASTE

    Directory of Open Access Journals (Sweden)

    T. V. Maslakova

    2015-01-01

    Full Text Available The paper presents results of experimental and theoretical studies aimed at expanding the applications of the copolymers on the basis of the waste styrene production. One of the areas is used as impregnating compositions of wood materials, selection of optimal conditions modification on samples of the most widely used in the industry of wood, such as birch, aspen and other. Studies were conducted to obtain and use an impregnating compositions based on copolymers synthesized from waste products of styrene and the cubic remainder rectification of ethylbenzene (CRRE for the protective treatment of birch wood. Identified physic-chemical characteristics of physical mixtures of copolymers «CORS», «STAM», CRRE at different ratios. Studied the process of modification birch using the method of experiment planning greco-latin square of the fourth order, and the influence of such factors as the temperature of the impregnating composition, the duration of the impregnation, the temperature and duration of thermal treatment on the performance moisture resistance of wood. Were established optimal conditions modification birch wood treated impregnating compositions on the basis of physical mixtures of copolymer «CORS» with CRRE and copolymer «STAM» with CRRE is the mixing ratio 2:1, the duration and temperature of the impregnation 7 h and 95 0C, time and temperature of heat treatment 7 h and 170 0C, respectively. A sealing composition containing CRRE with copolymer «STAM» 1:2 is more preferable, as in the structure of the copolymer «STAM» contains carboxyl and anhydrite group. Thus was justified use for the modification of natural wood impregnating compositions on the basis of physical mixtures of CRRE with copolymers «CORS» and «STAM», which improve the properties of wood, increase moisture and weather resistance more than twice.

  3. Factors influencing the, selection of state office furniture

    Science.gov (United States)

    R. Bruce Anderson; R. Bruce Anderson

    1973-01-01

    Evaluation of the factors influencing the selection of office furniture by nine state governments shows that quality and purchase price have the most important influence on the purchase decision. The intended use of the furniture and the purchasing regulations of the states were key f8CbrS in the use of wood furniture.

  4. 40 CFR 60.2971 - What are the emission limitations for air curtain incinerators that burn only wood waste, clean...

    Science.gov (United States)

    2010-07-01

    ... air curtain incinerators that burn only wood waste, clean lumber, and yard waste? 60.2971 Section 60... Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.2971 What are the emission limitations for air curtain incinerators that burn only wood waste, clean lumber, and yard waste? (a) Within...

  5. Waste wood as bioenergy feedstock. Climate change impacts and related emission uncertainties from waste wood based energy systems in the UK.

    Science.gov (United States)

    Röder, Mirjam; Thornley, Patricia

    2018-04-01

    Considering the urgent need to shift to low carbon energy carriers, waste wood resources could provide an alternative energy feedstock and at the same time reduce emissions from landfill. This research examines the climate change impacts and related emission uncertainties of waste wood based energy. For this, different grades of waste wood and energy application have been investigated using lifecycle assessment. Sensitivity analysis has then been applied for supply chain processes and feedstock properties for the main emission contributing categories: transport, processing, pelletizing, urea resin fraction and related N 2 O formation. The results show, depending on the waste wood grade, the conversion option, scale and the related reference case, that emission reductions of up to 91% are possible for non-treated wood waste. Compared to this, energy from treated wood waste with low contamination can achieve up to 83% emission savings, similar to untreated waste wood pellets, but in some cases emissions from waste wood based energy can exceed the ones of the fossil fuel reference - in the worst case by 126%. Emission reductions from highly contaminated feedstocks are largest when replacing electricity from large-scale coal and landfill. The highest emission uncertainties are related to the wood's resin fraction and N 2 O formation during combustion and, pelletizing. Comparing wood processing with diesel and electricity powered equipment also generated high variations in the results, while emission variations related to transport are relatively small. Using treated waste wood as a bioenergy feedstock can be a valid option to reduce emissions from energy production but this is only realisable if coal and landfill gas are replaced. To achieve meaningful emission reduction in line with national and international climate change targets, pre-treatment of waste wood would be required to reduce components that form N 2 O during the energy conversion. Copyright © 2017

  6. Fine granular of shredded waste tyre for road kerb application as improvised road furniture

    Science.gov (United States)

    Munikanan, Vikneswaran; Yahya, Muhamad Azani; Yusof, Mohammed Alias; Radzi, Muhammad Haris Fauzan

    2018-02-01

    Solid waste management in Malaysia was still in a backward stage. Population growth, urbanization and rapid industrialization led to an increase in the solid waste generated by society. Solid waste management is one of the main problems faced by the community, especially in the city. Solid waste management costs of the collection, collecting, transporting waste to the landfill, is very high. The quantity of solid waste should be reduced in order to reduce government spending. Moreover, improper solid waste management caused a negative impact on people and the environment. Method of recycling is one of the best alternatives to reduce the number of solid waste. Therefore, this study was to identify methods of recycling used tires to be used in civil engineering. This study was conducted to determine the effectiveness and properties of rubber from used tires to be add in the road kerb design.

  7. Making a meal out of wood wastes

    Energy Technology Data Exchange (ETDEWEB)

    1981-04-23

    Researchers at Waterloo University, Canada, have developed a fungal based process for making animal feedstuffs from cellulose wastes. It could solve the severe pollution problems of the pulp and paper mills and save on imported soya meal at the same time.

  8. CFD modeling and experience of waste-to-energy plant burning waste wood

    DEFF Research Database (Denmark)

    Rajh, B.; Yin, Chungen; Samec, N.

    2013-01-01

    Computational Fluid Dynamics (CFD) is being increasingly used in industry for in-depth understanding of the fundamental mixing, combustion, heat transfer and pollutant formation in combustion processes and for design and optimization of Waste-to-Energy (WtE) plants. In this paper, CFD modeling...... the conversion of the waste wood in the fuel bed on the grate, which provides the appropriate inlet boundary condition for the freeboard 3D CFD simulation. The CFD analysis reveals the detailed mixing and combustion characteristics in the waste wood-fired furnace, pinpointing how to improve the design...

  9. Characterization of wood dust from furniture by scanning electron microscopy and energy-dispersive x-ray analysis.

    Science.gov (United States)

    Gómez Yepes, Milena Elizabeth; Cremades, Lázaro V

    2011-01-01

    Study characterized and analyzed form factor, elementary composition and particle size of wood dust, in order to understand its harmful health effects on carpenters in Quindío (Colombia). Once particle characteristics (size distributions, aerodynamic equivalent diameter (D(α)), elemental composition and shape factors) were analyzed, particles were then characterized via scanning electron microscopy (SEM) in conjunction with energy dispersive X-ray analysis (EDXRA). SEM analysis of particulate matter showed: 1) cone-shaped particle ranged from 2.09 to 48.79 µm D(α); 2) rectangular prism-shaped particle from 2.47 to 72.9 µm D(α); 3) cylindrically-shaped particle from 2.5 to 48.79 µm D(α); and 4) spherically-shaped particle from 2.61 to 51.93 µm D(α). EDXRA reveals presence of chemical elements from paints and varnishes such as Ca, K, Na and Cr. SEM/EDXRA contributes in a significant manner to the morphological characterization of wood dust. It is obvious that the type of particles sampled is a complex function of shapes and sizes of particles. Thus, it is important to investigate the influence of particles characteristics, morphology, shapes and D(α) that may affect the health of carpenters in Quindío.

  10. State-of-the-art of waste wood supply chain in Germany and selected European countries.

    Science.gov (United States)

    Garcia, Carlos A; Hora, Guido

    2017-12-01

    According to the statistic office of the European Union (Eurostat), Germany is the main producer of waste wood in Europe followed by France, United Kingdom, Italy and Finland. Based on the characteristics of the waste wood, it can be classified in four (4) categories: A I, A II, A III and A IV. This paper focuses in the A I waste wood since is the only category able to be used directly for both material and energy purposes without a previously pre-treatment. Currently, most of this waste wood is used for direct energy production due to the previous government legislation that promoted its use directly in incineration facilities. However, the newest Renewable Energy Act (EEG 2017) may promote the cascade-use of A I waste wood prior to be intended for energy purposes. Nonetheless, the government incentives to the energy sector is not the only bottleneck that the use of A I waste wood as raw material in the wood-based industry has to overcome. The peak availability, collection logistics (collection centers and transportation) and recycling facility location are some of the parameters that must be considered in order to design the "best" supply chain network for A I waste wood. This work presents a detailed description of the effect of the hierarchical strategic decision in the proper design of the waste wood supply chain. Additionally, the global picture of waste wood recycling in different European countries (UK, Italy and Finland) is briefly presented. Copyright © 2017. Published by Elsevier Ltd.

  11. Drying wood waste with a pulse combustion dryer

    Energy Technology Data Exchange (ETDEWEB)

    Buchkowski, A.G. [Spectrum Engineering Corp., Ltd., Peterborough, Ontario (Canada); Kitchen, J.A. [John A. Kitchen, Ltd., Hastings, Ontario (Canada)

    1993-12-31

    There is a vast amount of wood waste available to be used as an alternate fuel if its moisture could be reduced efficiently. Tests have been conducted to assess an industrial dryer using pulse combustion as a heating source for drying wood waste; specifically sawdust and pulverized wet hog fuel. Pulse combustion offers the advantage of high heat transfer, efficient combustion, and low NO{sub x} emissions. The material is injected into the exhaust gases in the tailpipe of the combustor which uses natural gas or propane as a fuel. The turbulence created by the pulsations enhance the drying process by reducing the boundary layer thicknesses. The materials is further dried in a rotary drum. The material has been dried without scorching or burning in tests where the inlet moisture content has been as high as 60% on a wet basis. The outlet moisture contents achieved have typically been 10%. Analysis of the test data and cost estimates of the equipment indicate that the pulse combustion drying system is at least comparable to existing systems in terms of operating costs, and offers very significant savings in capital costs. Testing with various other materials such as wood pulp, sludges and peat is continuing to further assess the equipment`s performance.

  12. Gasification of Wood and Non-wood Waste of Timber Production as Perspectives for Development of Bioenergy

    Science.gov (United States)

    Kislukhina, Irina A.; Rybakova, Olga G.

    2018-03-01

    The article deals with biomass gasification technology using the gasification plant running on wood chips and pellets, produced from essential oils waste (waste of coniferous boughs). During the study, the authors solved the process task of improving the quality of the product gas derived from non-wood waste of timber production (coniferous boughs) due to the extraction of essential oils and the subsequent thermal processing of spent coniferous boughs at a temperature of 250-300°C degrees without oxygen immediately before pelleting. The paper provides the improved biomass gasification process scheme including the grinding of coniferous boughs, essential oil distillation and thermal treatment of coniferous boughs waste and pelletizing.

  13. POLYMER COMPOSITES MODIFIED BY WASTE MATERIALS CONTAINING WOOD FIBRES

    Directory of Open Access Journals (Sweden)

    Bernardeta Dębska

    2016-11-01

    Full Text Available In recent years, the idea of sustainable development has become one of the most important require-ments of civilization. Development of sustainable construction involves the need for the introduction of innovative technologies and solutions that will combine beneficial economic effects with taking care of the health and comfort of users, reducing the negative impact of the materials on the environment. Composites obtained from the use of waste materials are part of these assumptions. These include modified epoxy mortar containing waste wood fibres, described in this article. The modification consists in the substitution of sand by crushed waste boards, previously used as underlays for panels, in quantities of 0%, 10%, 20%, 35% and 50% by weight, respectively. Composites containing up to 20% of the modifier which were characterized by low water absorption, and good mechanical properties, also retained them after the process of cyclic freezing and thawing.

  14. CORROSION AND CHEMICAL WASTE IN SAWBLADES STEEL USED IN WOOD

    Directory of Open Access Journals (Sweden)

    Paulo Fernando Trugilho

    2002-01-01

    Full Text Available The objective this work was to evaluate the chemical waste provoked by the wood on the sheets of steel used in the making of the mountains and cut tools. It was certain the correlationbetween the chemical waste and the extractive soluble in cold water, hot water and in the sequencetoluene and ethanol content. Two types of steel and twenty-seven species different from wood wereused. The corrosive agent, constituted of 50 g of fresh sawdust (moist mixed to 50 ml of distilledwater, it was prepared and placed inside of the plastic box, hermetically closed, on the samples ofsteel, which were totally immersed. The box was placed in a water bath pre-heated to 75°C, that themedium temperature of reaction is considered, that affects the sheet of the sawblade in operation. Thisgroup was operated to 80 rotations per minute (rpm. The time of reaction was of four hours. Afterthat time the corrosive agent was discarded and the samples were washed, dried and weighed. At theend, each sample was processed by a total period of forty hours. The chemical waste was evaluated by the weight difference suffered from beginning at the end of the experiment. For theresults it was observed that the Eucalyptus tradryphloia and the Eucalyptus phaeotricha the speciesthat provoked were, respectively, the largest and smaller chemical waste for the two types of steelappraised. Great variation exists in the chemical waste due to the effect of the species. The corrosionand chemical waste are especially related with the quality of the material solved in ethanol. The 1070steel were more attached than the 6170 steel.

  15. Chemi-thermomechanical pulping of para rubber waste wood

    Energy Technology Data Exchange (ETDEWEB)

    Kubo, T.; Hosokawa, J.; Kobayashi, T.; Kobayashi, Y.

    1981-01-01

    The addition of NaOH to Na/sub 2/SO/sub 3/-treated waste wood chips (Hevea brasiliensis) increased long fiber fraction, Klason lignin content and bulk density, improved breaking length and tear factor, and decreased energy consumption in refining and brightness of resulting chemithermomechanical pulp. Lowering in brightness by alkali treatment was recovered by H/sub 2/O/sub 2/ bleaching, and bleaching with 8% H/sub 2/O/sub 2/ on pulp gave pulp with 61.3% brightness.

  16. Design and testing of wood containers for radioactive waste

    International Nuclear Information System (INIS)

    Roberts, R.S.; Barry, P.E.

    1981-01-01

    A wood container for shipping and storing radioactive waste was designed to eliminate the problems caused by the weight, cost, and shape of the steel containers previously used. Tests specified by federal regulations (compression, free-drop, penetration, and vibration) were conducted on two of the containers, one loaded to 2500 lb and one loaded to 5000 lb. The 5000-lb container failed the free-drop test, but the 2500-lb container easily passed the tests and therefore qualifies as a Type A container. Its simplicity of design, low weight, and ease in handling have proved to be time-saving and cost-effective

  17. North American Wood Waste Forum: Summary of Group Feedback, 2-3, 2012

    Science.gov (United States)

    Bob Falk

    2012-01-01

    This report summarizes the feedback and recommendations of the North American Wood Recovery Group. This report summarizes the barriers and opportunities in wood recovery, reuse, and recycling as identified by this group of stakeholders from the wood industry, waste industry, and relevant government agencies.

  18. Jepara Indonesia Furniture

    OpenAIRE

    romanzick

    2016-01-01

    Jepara Indonesia Furniture A wide choice of Indonesian furniture companies provide free business listings to all types of furniture also for outlets and stores. Each section is accessible that contains a comprehensive list of our range of furniture details information and full campaign. We provided a platform create various products along with featured inspiration section related products, services, accessories. Indonesia Furniture Teak Garden Furniture It is bringing customers distinctive as...

  19. Leaching of CCA-treated wood: implications for waste disposal

    International Nuclear Information System (INIS)

    Townsend, Timothy; Tolaymat, Thabet; Solo-Gabriele, Helena; Dubey, Brajesh; Stook, Kristin; Wadanambi, Lakmini

    2004-01-01

    Leaching of arsenic, chromium, and copper from chromated copper arsenate (CCA)-treated wood poses possible environmental risk when disposed. Samples of un-weathered CCA-treated wood were tested using a variety of the US regulatory leaching procedures, including the toxicity characteristic leaching procedure (TCLP), synthetic precipitation leaching procedure (SPLP), extraction procedure toxicity method (EPTOX), waste extraction test (WET), multiple extraction procedure (MEP), and modifications of these procedures which utilized actual MSW landfill leachates, a construction and demolition (C and D) debris leachate, and a concrete enhanced leachate. Additional experiments were conducted to assess factors affecting leaching, such as particle size, pH, and leaching contact time. Results from the regulatory leaching tests provided similar results with the exception of the WET, which extracted greater quantities of metals. Experiments conducted using actual MSW leachate, C and D debris leachate, and concrete enhanced leachate provided results that were within the same order of magnitude as results obtained from TCLP, SPLP, and EPTOX. Eleven of 13 samples of CCA-treated dimensional lumber exceeded the US EPA's toxicity characteristic (TC) threshold for arsenic (5 mg/L). If un-weathered arsenic-treated wood were not otherwise excluded from the definition of hazardous waste, it frequently would require management as such. When extracted with simulated rainwater (SPLP), 9 of the 13 samples leached arsenic at concentrations above 5 mg/L. Metal leachability tended to increase with decreasing particle size and at pH extremes. All three metals leached above the drinking water standards thus possibly posing a potential risk to groundwater. Arsenic is a major concern from a disposal point of view with respect to ground water quality

  20. Roughness study on homogeneous layer panels manufactured from treated wood waste

    Directory of Open Access Journals (Sweden)

    Maria Fátima do Nascimento

    2017-02-01

    Full Text Available Natural resource exploration is growing, highlighting woods and joinery waste, wood industries and the like. This study presents homogeneous particleboard (PPH roughness characterization manufactured from treated wood waste. Normative document with values of Brazilian Technical Standard Association ABNT NBR 8404 (1984, was adopted as a reference. The results show that the manufactured PPH showed roughness class N 10, with roughness values (Ra of less than 12.5 microns.

  1. Substitution potentials of recycled HDPE and wood particles from post-consumer packaging waste in Wood-Plastic Composites.

    Science.gov (United States)

    Sommerhuber, Philipp F; Welling, Johannes; Krause, Andreas

    2015-12-01

    The market share of Wood-Plastic Composites (WPC) is small but expected to grow sharply in Europe. This raises some concerns about suitable wood particles needed in the wood-based panels industry in Europe. Concerns are stimulated by the competition between the promotion of wooden products through the European Bioeconomy Strategy and wood as an energy carrier through the Renewable Energy Directive. Cascade use of resources and valorisation of waste are potential strategies to overcome resource scarcity. Under experimental design conditions, WPC made from post-consumer recycled wood and plastic (HDPE) were compared to WPC made from virgin resources. Wood content in the polymer matrix was raised in two steps from 0% to 30% and 60%. Mechanical and physical properties and colour differences were characterized. The feasibility of using cascaded resources for WPC is discussed. Results indicate the technical and economic feasibility of using recycled HDPE from packaging waste for WPC. Based on technical properties, 30% recycled wood content for WPC is feasible, but economic and political barriers of efficient cascading of biomass need to be overcome. Copyright © 2015 Elsevier Ltd. All rights reserved.

  2. 40 CFR 60.3066 - What are the emission limitations for air curtain incinerators that burn only wood waste, clean...

    Science.gov (United States)

    2010-07-01

    ... air curtain incinerators that burn only wood waste, clean lumber, and yard waste? 60.3066 Section 60... Waste Incineration Units That Commenced Construction On or Before December 9, 2004 Model Rule-Air Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.3066 What are the...

  3. Wood products in the waste stream: Characterization and combustion emissions. Volume 1. Final report

    International Nuclear Information System (INIS)

    1992-11-01

    Waste wood is wood separated from the solid-waste stream and processed into a uniform-sized product that is reused for other purposes such as fuel. As an alternative to the combustion of fossil fuels, it has raised concerns that if it is 'contaminated' with paints, resins, preservatives, etc., unacceptable environmental impacts may be generated during combustion. Given the difficulty of separating contaminated materials from waste wood and the large energy potential existing in the resource, it is important to identify possible problems associated with contaminated waste wood combustion. The study describes research about technical, public policy, and regulatory issues that affect the processing and combustion of waste wood for fuel. The project's purpose was to provide environmental regulators, project developers, and others with data to make informed decisions on the use of waste wood materials as a combustion resource. Potential environmental problems and solutions were identified. A specific project result was the identification of combustion system operation parameters and air pollution control technologies that can minimize emissions of identified air and solid waste contaminants from combustion of wood waste

  4. 78 FR 35249 - Wooden Bedroom Furniture From the People's Republic of China: Final Results of Antidumping Duty...

    Science.gov (United States)

    2013-06-12

    ....; Dongying Huanghekou Furniture Industry Co., Ltd.; Sheng Jing Wood Products (Beijing) Co., Ltd.; and Telstar... Furniture Industry Co., Ltd.; Sheng Jing Wood Products (Beijing) Co., Ltd.; and Telstar Enterprises Ltd... DEPARTMENT OF COMMERCE International Trade Administration [A-570-890] Wooden Bedroom Furniture...

  5. Implementation of new technologies in wood industry and their effect in wood products quality

    OpenAIRE

    ELVA ÇAUSHI; PANDELI MARKU

    2014-01-01

    There are about 300 companies producing furniture and about 250 small and medium enterprises (SME) producing sawn timber, which operate in the field of wood industry in Albania. This wood industry production is being challenged by the increasing demand in the domestic market, ranging from kitchen furniture to office and schools furniture, bedroom furniture, doors, windows, and saw timber in different dimensions. The production from the wood industry can fulfill about 80% of the domestic mark...

  6. Furniture Industry Assessment: Trade Policy and Market Opportunities

    OpenAIRE

    Lord, Montague J.

    1999-01-01

    The report analyzes the international competitiveness of furniture industry based on calculations of effective rates of protection and trade indicators. Furniture manufacturing remains one of the most highly protected industries in Egypt. Although the nominal rate of protection (NRP) for that industry was lowered from 50 percent in 1997 to 40 percent, its rate remains the fourth highest of all manufacturing categories. The effective rate of protection (ERP) for the wood furniture industry is ...

  7. 40 CFR 62.14815 - What are the emission limitations for air curtain incinerators that burn 100 percent wood wastes...

    Science.gov (United States)

    2010-07-01

    ... air curtain incinerators that burn 100 percent wood wastes, clean lumber and/or yard waste? 62.14815... Requirements for Commercial and Industrial Solid Waste Incineration Units That Commenced Construction On or Before November 30, 1999 Air Curtain Incinerators That Burn 100 Percent Wood Wastes, Clean Lumber And/or...

  8. Identifying future competitive business strategies for the U.S. furniture industry: Benchmarking and paradigm shifts

    Science.gov (United States)

    Albert Schuler; Urs Buehlmann

    2003-01-01

    This paper describes benchmarking activities undertaken to provide a basis for comparing the U.S. wood furniture industry with other nations that have a globally competitive furniture manufacturing industry. The second part of this paper outlines and discusses strategies that have the potential to help the U.S. furniture industry survive and thrive in a global business...

  9. How do retailers rate the United States and Canada as furniture sources compared to China?

    Science.gov (United States)

    Urs Buehlmann; Matthew Bumgardner; Mary Frye; Torsten Lihra

    2008-01-01

    During the past decade, the U.S. wood household furniture industry has lost a significant share of its domestic market to imported furniture. This market share loss has been widely discussed and analyzed, largely from a manufacturing perspective. A relatively unexplored dimension of household furniture importing is the perspective of the retailer. Retailers play a...

  10. A Study on the Effect of Plasma Treatment for Waste Wood Biocomposites

    Directory of Open Access Journals (Sweden)

    MiMi Kim

    2013-01-01

    Full Text Available The surface modification of wood powder by atmospheric pressure plasma treatment was investigated. The composites were manufactured using wood powder and polypropylene (wood powder: polypropylene = 55 wt% : 45 wt%. Atmospheric pressure plasma treatment was applied under the condition of 3 KV, 17±1 KHz, 2 g/min. Helium was used as the carrier gas and hexamethyl-disiloxane (HMDSO as the monomer to modify the surface property of the waste wood biocomposites by plasma polymerization. The tensile strengths of untreated waste wood powder (W3 and single species wood powder (S3 were about 18.5 MPa and 21.5 MPa while those of plasma treated waste wood powder (PW3 and plasma treated single species wood powder (PS3 were about 21.2 MPa and 23.4 MPa, respectively. Tensile strengths of W3 and S3 were improved by 14.6% and 8.8%, respectively. From the analyses of mechanical properties and morphology, we conclude that the interfacial bonding of polypropylene and wood powder can be improved by atmospheric pressure plasma treatment.

  11. physico-chemical properties and energy potential of wood wastes

    African Journals Online (AJOL)

    user

    were performed to assess the energy characteristics of the collected wood .... Methods. Wood processing activities were physically observed for. 6 days/wk at the sawmills for 15weeks. ..... [10] Oladeji, J T “Fuel characterization of briquettes.

  12. Electrodialytic remediation of CCA-treated waste wood in a 2 m3 pilot plant

    DEFF Research Database (Denmark)

    Christensen, Iben Vernegren; Pedersen, Anne Juul; Ottosen, Lisbeth M.

    2006-01-01

    Waste wood that has been treated with chromated-copper-arsenate (CCA) poses a potential environmental problem due to the content of copper, chromium and arsenic. A pilot plant for electrodialytic remediation of up to 2 m3 wood has been designed and tested and the results are presented here. Sever...

  13. PENGARUH UMUR POHON, BONITA DAN POSISI AKSIAL BATANG TERHADAP STRUKTUR MAKROSKOPIS DAN KUALITAS KAYU JATI SEBAGAI BAHAN FURNITUR (Effect of Tree Age, Site Quality Index and Trunk Axial Position on Macroscopic Structure and Quality of Teak Wood

    Directory of Open Access Journals (Sweden)

    Yustinus Suranto

    2015-03-01

    is an alternative solution of limited raw materials faced by furniture industry. Young wood tends to have a low-quality wood. One element for measuring wood quality is wood macroscopic structure properties. This study was aimed to determine the effect of tree age, site quality index and axial stem position on wood structures and wood quality. Thirty-six young teak trees were harvested on forest areas of Kendal Forest District, Central Java Province. Three disks were taken from each trunk, namely from the butt, middle and upper parts. Heartwood proportion and annual ring dimensions were measured based on natural color difference by using millimeter grid apparatus. Data were analyzed by using variance analysis arranged in blocked factorial and further testing were performed by using HSD Duncan. Wood quality was analyzed using determinant method which elaborated based on Z norm curve. Results showed that interaction of three factors did not affect on heart-wood proportion and growth ring dimensions. Interaction of age classes and site quality index influence significantly on heart-wood proportion and growth ring dimensions. Stem axial position significantly affects on heart-wood proportion and very significantly effect on growth ring dimensions. The lower wood position, the higher heart-wood proportion and the wider growth ring dimensions. Interaction of three factors namely class age V, site quality index 4 and middle trunk position has a highest wood quality, namely class 2, but interaction of age class V, site quality index 3 and top trunk has the lowest one, namely class 4. The use of wood-based quality will maximize the value and increase the product lifespan, thereby reducing the intensity of logging and become more environmental friendly.

  14. Physical and chemical characterization of waste wood derived biochars.

    Science.gov (United States)

    Yargicoglu, Erin N; Sadasivam, Bala Yamini; Reddy, Krishna R; Spokas, Kurt

    2015-02-01

    Biochar, a solid byproduct generated during waste biomass pyrolysis or gasification in the absence (or near-absence) of oxygen, has recently garnered interest for both agricultural and environmental management purposes owing to its unique physicochemical properties. Favorable properties of biochar include its high surface area and porosity, and ability to adsorb a variety of compounds, including nutrients, organic contaminants, and some gases. Physical and chemical properties of biochars are dictated by the feedstock and production processes (pyrolysis or gasification temperature, conversion technology and pre- and post-treatment processes, if any), which vary widely across commercially produced biochars. In this study, several commercially available biochars derived from waste wood are characterized for physical and chemical properties that can signify their relevant environmental applications. Parameters characterized include: physical properties (particle size distribution, specific gravity, density, porosity, surface area), hydraulic properties (hydraulic conductivity and water holding capacity), and chemical and electrochemical properties (organic matter and organic carbon contents, pH, oxidation-reduction potential and electrical conductivity, zeta potential, carbon, nitrogen and hydrogen (CHN) elemental composition, polycyclic aromatic hydrocarbons (PAHs), heavy metals, and leachable PAHs and heavy metals). A wide range of fixed carbon (0-47.8%), volatile matter (28-74.1%), and ash contents (1.5-65.7%) were observed among tested biochars. A high variability in surface area (0.1-155.1g/m(2)) and PAH and heavy metal contents of the solid phase among commercially available biochars was also observed (0.7-83 mg kg(-1)), underscoring the importance of pre-screening biochars prior to application. Production conditions appear to dictate PAH content--with the highest PAHs observed in biochar produced via fast pyrolysis and lowest among the gasification

  15. Electrochemical removal of CU, CR and AS from CCA-treated waste wood

    Energy Technology Data Exchange (ETDEWEB)

    Kristensen, I.V.; Ottosen, L.M.; Villumsen, A. [Dept. of Geology and Geotechnical Engineering, The Technical Univ. of Denmark, Lyngby (Denmark); Ribeiro, A.B. [Dept. of Geology and Geotechnical Engineering, The Technical Univ. of Denmark, Lyngby (Denmark)]|[Dept. de Ciencias e Engenharia do Ambiente, Faculdade de Ciencias e Tecnologia, Univ. Nova de Lisboa, Caparica (Portugal)

    2001-07-01

    CCA-treated waste wood poses a potential environmental problem due to the content of copper, chromium and arsenic. This paper presents the results obtained by electrodialytic remediation of CCA-treated waste wood. It is found that more than 90% Cu, and approximately 85% Cr and As was removed from the wood during the remediation. Thereby the concentration of copper in the wood is reduced from app. 426 ppm to app. 25 ppm, chromium is reduced from app. 837 ppm to app. 135 ppm and the arsenic content decreases from app. 589 ppm to app. 151 ppm. After remediation the removed metals are collected into liquids. The use of ion exchange membranes to separate the wood from the electrolytes result in a distribution of the metals after remediation that makes the collection of the metals easier, and reuse of the metals, for e.g. new CCA, may be possible. (orig.)

  16. Jackfruit (Artocarpus heterophyllus lamk) wood waste as a textile natural dye by micowave-assisted extraction method

    Science.gov (United States)

    Qadariyah, Lailatul; Gala, Selfina; Widoretno, Dhaniar Rulandri; Kunhermanti, Delita; Bhuana, Donny S.; Sumarno, Mahfud, Mahfud

    2017-05-01

    The development of technology causes most of textile industries in Indonesia prefer to use synthetic dyes in the fabric dyeing process. In fact, synthetic dyes is able to have negative effect since it is is toxic to the health of workers and environment. To resolve this issues, one way to do is to use natural dyes. One of untapped potential in Indonesia is wood waste of jackfruit from furniture industry. Jackfruit wood itself containing dyestuffs which gives yellow color pigment so that it can be used as an alternative source of natural dyes. The purpose of this research is to study the effect of extraction time, mass to solvent volume ratio, and microwave power to yield of dyes. The extract of dye analyzed by UV-Visible Spectrophotometer and GC-MS, along the coloring and endurance tests of natural dyes on fabric and compare it with synthetic dyes. In this research, material is going to be extracted is the wood of jackfruit (Artocarpus heterophyllus lamk) with material size between 35 mesh - 60 mesh. The extraction process is done by using ethanol 96%. Extraction using MAE is carried out at the ratio of materials to solvent of 0,02-0,1 g/mL, the microwave power of 100-800 Watt, and the extraction time of 10-90 minutes. The conclusion is at microwave power of 400 Watt, material to solvent ratio of the 0,02 g/mL, the yield is 3,39% while at microwave power of 600 Watt, material to solvent ratio of the 0,02 g/mL, the yield is 3,67% with extraction time of 30 minutes. The highest recovery from ethanol 96% solvent is 60,41%. The result of UV-Vis Spectrophotometry and GC-MS test show that there is a chromophore compound in the extract of natural dye. The test results show the natural dyes of jackfruit wood can be used to coloring on the textile because it can gives staining result permanently.

  17. Online sorting of recovered wood waste by automated XRF-technology: part II. Sorting efficiencies.

    Science.gov (United States)

    Hasan, A Rasem; Solo-Gabriele, Helena; Townsend, Timothy

    2011-04-01

    Sorting of waste wood is an important process practiced at recycling facilities in order to detect and divert contaminants from recycled wood products. Contaminants of concern include arsenic, chromium and copper found in chemically preserved wood. The objective of this research was to evaluate the sorting efficiencies of both treated and untreated parts of the wood waste stream, and metal (As, Cr and Cu) mass recoveries by the use of automated X-ray fluorescence (XRF) systems. A full-scale system was used for experimentation. This unit consisted of an XRF-detection chamber mounted on the top of a conveyor and a pneumatic slide-way diverter which sorted wood into presumed treated and presumed untreated piles. A randomized block design was used to evaluate the operational conveyance parameters of the system, including wood feed rate and conveyor belt speed. Results indicated that online sorting efficiencies of waste wood by XRF technology were high based on number and weight of pieces (70-87% and 75-92% for treated wood and 66-97% and 68-96% for untreated wood, respectively). These sorting efficiencies achieved mass recovery for metals of 81-99% for As, 75-95% for Cu and 82-99% of Cr. The incorrect sorting of wood was attributed almost equally to deficiencies in the detection and conveyance/diversion systems. Even with its deficiencies, the system was capable of producing a recyclable portion that met residential soil quality levels established for Florida, for an infeed that contained 5% of treated wood. Copyright © 2010 Elsevier Ltd. All rights reserved.

  18. Investigation on the Scratch Strength of Clear Paints Used in Furniture Industries on the Wood Species Beech, Elm, Alder and Spruce

    Directory of Open Access Journals (Sweden)

    Mohammad Ghofrani

    2014-05-01

    Full Text Available In This research, the scratch strength (Cross-Cut Test of clear paints (nitrocellulose lacquers and acid catalyst lacquers of wood species Beech, Elm, Alder and spruce were studied as a function of moisture content (MC of the samples. For this purpose, lumbers (550×110×12 mm were cut from sapwood in tangential surfaces and were air dried for one month according to wood drying procedures. Then, for pre-conditioning of moisture content, at the levels of 8%, 12% and 15%, the samples were placed in three clima rooms. Then, finish applied and strength tests were performed. The results revealed that for acid catalyst lacquers the highest scratch strength (10.4% belongs to Elm wood with 8% moisture content, and the lowest scratch strength (53.6% belongs to Spruce wood with nitrocellulose lacquers having 15% moisture content.

  19. Wood

    DEFF Research Database (Denmark)

    Unterrainer, Walter

    2014-01-01

    come from? How is it harvested? How is it manufactured and treated ? How are the buildings detailed and protected against weather during construction to keep them dry and make them long-life ? In a period of climate change, forests are the last lungs of the planet to sequestrate CO2. Their global size......Wood – a sustainable building material ? For thousands of years and all over the planet, wood has been used as a building material and exciting architecture has been created in wood. The fantastic structural, physical and aesthetic properties of the material as well as the fact that wood...

  20. Application of a CCA-treated wood waste decontamination process to other copper-based preservative-treated wood after disposal

    Energy Technology Data Exchange (ETDEWEB)

    Janin, Amelie, E-mail: amelie.janin@ete.inrs.ca [University of Toronto, Faculty of Forestry, 33, Willcocks St., Toronto, ON, M5S 3B3 (Canada); Coudert, Lucie, E-mail: lucie.coudert@ete.inrs.ca [Institut national de la recherche scientifique (Centre Eau, Terre et Environnement), Universite du Quebec, 490 rue de la Couronne, Quebec, QC, G1K 9A9 (Canada); Riche, Pauline, E-mail: pauline.riche@ete.inrs.ca [Institut national de la recherche scientifique (Centre Eau, Terre et Environnement), Universite du Quebec, 490 rue de la Couronne, Quebec, QC, G1K 9A9 (Canada); Mercier, Guy, E-mail: guy_mercier@ete.inrs.ca [Institut national de la recherche scientifique (Centre Eau, Terre et Environnement), Universite du Quebec, 490 rue de la Couronne, Quebec, QC, G1K 9A9 (Canada); Cooper, Paul, E-mail: p.cooper@utoronto.ca [University of Toronto, Faculty of Forestry, 33, Willcocks St., Toronto, ON, M5S 3B3 (Canada); Blais, Jean-Francois, E-mail: blaisjf@ete.inrs.ca [Institut national de la recherche scientifique (Centre Eau, Terre et Environnement), Universite du Quebec, 490 rue de la Couronne, Quebec, QC, G1K 9A9 (Canada)

    2011-02-28

    Research highlights: {yields} This paper describes a process for the metal removal from treated (CA-, ACQ- or MCQ-) wood wastes. {yields} This sulfuric acid leaching process is simple and economic. {yields} The remediated wood could be recycled in the industry. - Abstract: Chromated copper arsenate (CCA)-treated wood was widely used until 2004 for residential and industrial applications. Since 2004, CCA was replaced by alternative copper preservatives such as alkaline copper quaternary (ACQ), copper azole (CA) and micronized copper quaternary (MCQ), for residential applications due to health concerns. Treated wood waste disposal is becoming an issue. Previous studies identified a chemical process for decontaminating CCA-treated wood waste based on sulfuric acid leaching. The potential application of this process to wood treated with the copper-based preservatives (alkaline copper quaternary (ACQ), copper azole (CA) and micronized copper quaternary (MCQ)) is investigated here. Three consecutive leaching steps with 0.1 M sulfuric acid at 75 deg, C for 2 h were successful for all the types of treated wood and achieved more than 98% copper solubilisation. The different acidic leachates produced were successively treated by coagulation using ferric chloride and precipitation (pH = 7) using sodium hydroxide. Between 94 and 99% of copper in leachates could be recovered by electrodeposition after 90 min using 2 A electrical current. Thus, the process previously developed for CCA-treated wood waste decontamination could be efficiently applied for CA-, ACQ- or MCQ-treated wood.

  1. Detoxification of wood preserving waste under ambient, enhanced and chemical pretreatment conditions

    Energy Technology Data Exchange (ETDEWEB)

    Hong, M.S.; Brown, K.W.; Dale, B.E.; Donnelly, K.C.; He, L.Y.; Markiewicz, K.V. [Texas A and M Univ., College Station, TX (United States)

    1994-12-31

    Detoxification of pentachlorophenol-containing wood preserving waste was monitored under ambient, enhanced and chemical pretreatment conditions for genotoxicity and parent compound removal. Samples were collected throughout the treatment periods and sequentially extracted with dichloromethane and methanol with the Tecator Soxtec apparatus. The organic extracts were analyzed on GC/ECD and GC/MS. The extract mutagenic and genotoxic potentials were evaluated with and without metabolic activation with the Salmonella Microsomal and E. coli Prophage Induction assays. The Salmonella mutagenic responses of extracts from Weswood soil amended with wood preserving waste and treated under ambient conditions were 2.0, 34.6 and 2.4 times greater than the solvent control on days 0, 540 and 1,200 respectively. Organic extracts of soil amended with wood preserving waste and treated under enhanced conditions in a solid-phase rotating drum bioreactor had mutagenic potentials of 3.4, 4.9 and 3.5 on days 0, 14 and 30, respectively. Extracts from wood preserving waste sludge treated with potassium polyethylene glycol were shown to have mutagenic potentials of 2.8, 6.1 and 3.8 at 0, 10 and 30 minutes. The results indicate that the initial products of the wood preserving waste detoxification under all treatment conditions appear to have greater genotoxic potentials than the starting material. The results also suggest that a more rapid detoxification occurs under enhanced and chemical pretreatment conditions.

  2. A novel approach in organic waste utilization through biochar addition in wood/polypropylene composites

    Energy Technology Data Exchange (ETDEWEB)

    Das, Oisik [Department of Civil and Environmental Engineering, University of Auckland, Auckland 1142 (New Zealand); Sarmah, Ajit K., E-mail: a.sarmah@auckland.ac.nz [Department of Civil and Environmental Engineering, University of Auckland, Auckland 1142 (New Zealand); Bhattacharyya, Debes [Department of Mechanical Engineering, Center for Advanced Composite Materials, University of Auckland, Auckland 1142 (New Zealand)

    2015-04-15

    Highlights: • Biochar made from waste wood was added with wood polypropylene composites. • 24% biochar gave the best mechanical properties. • 6% biochar had no effect on physico-mechanical properties of composites. • Coupling agent remained unreacted in composites having higher amount of biochar. - Abstract: In an attempt to concurrently address the issues related to landfill gas emission and utilization of organic wastes, a relatively novel idea is introduced to develop biocomposites where biochar made from pyrolysis of waste wood (Pinus radiata) is added with the same wood, plastic/polymer (polypropylene) and maleated anhydride polypropylene (MAPP). Experiments were conducted by manufacturing wood and polypropylene composites (WPCs) mixed with 6 wt%, 12 wt%, 18 wt%, 24 wt%, and 30 wt% biochar. Though 6 wt% addition had similar properties to that of the control (composite without biochar), increasing biochar content to 24 wt% improved the composite’s tensile/flexural strengths and moduli. The biochar, having high surface area due to fine particles and being highly carbonised, acted as reinforcing filler in the biocomposite. Composites having 12 wt% and 18 wt% of biochar were found to be the most ductile and thermally stable, respectively. This study demonstrates that, WPCs added with biochar has good potential to mitigate wastes while simultaneously producing biocomposites having properties that might be suited for various end applications.

  3. A novel approach in organic waste utilization through biochar addition in wood/polypropylene composites

    International Nuclear Information System (INIS)

    Das, Oisik; Sarmah, Ajit K.; Bhattacharyya, Debes

    2015-01-01

    Highlights: • Biochar made from waste wood was added with wood polypropylene composites. • 24% biochar gave the best mechanical properties. • 6% biochar had no effect on physico-mechanical properties of composites. • Coupling agent remained unreacted in composites having higher amount of biochar. - Abstract: In an attempt to concurrently address the issues related to landfill gas emission and utilization of organic wastes, a relatively novel idea is introduced to develop biocomposites where biochar made from pyrolysis of waste wood (Pinus radiata) is added with the same wood, plastic/polymer (polypropylene) and maleated anhydride polypropylene (MAPP). Experiments were conducted by manufacturing wood and polypropylene composites (WPCs) mixed with 6 wt%, 12 wt%, 18 wt%, 24 wt%, and 30 wt% biochar. Though 6 wt% addition had similar properties to that of the control (composite without biochar), increasing biochar content to 24 wt% improved the composite’s tensile/flexural strengths and moduli. The biochar, having high surface area due to fine particles and being highly carbonised, acted as reinforcing filler in the biocomposite. Composites having 12 wt% and 18 wt% of biochar were found to be the most ductile and thermally stable, respectively. This study demonstrates that, WPCs added with biochar has good potential to mitigate wastes while simultaneously producing biocomposites having properties that might be suited for various end applications

  4. Scarcity on the market for wood wastes; Krapte op de markt voor afvalhout

    Energy Technology Data Exchange (ETDEWEB)

    De Boer, A. (ed.)

    2004-05-01

    An overview is given of the market for wood wastes in the Netherlands and how this affects the targets to use biomass. Several types of biomass must be imported, not only wood wastes, but also e.g. olive stones and cacao shells. [Dutch] Er dreigt in Nederland een krapte te ontstaan op de markt voor afvalhout, want de vraag vanuit de buitenlandse vezelplaatindustrie blijft constant, terwijl er vanuit de energiesector een groeiende vraag is. Om de beleidsdoelstellingen voor biomassa te kunnen halen zal er biomassa geimporteerd moeten worden. Daarbij kan het gaan om resthout of afvalhout, maar ook om andere biomassastromen zoals olijfpitten en cacaodoppen.

  5. Aproveitamento de resíduos de painéis de madeira gerados pela indústria moveleira na produção de pequenos objetos Small objetcs manufactured with wood panel residues generated by rhe furniture industry

    Directory of Open Access Journals (Sweden)

    Luciana Barbosa de Abreu

    2009-02-01

    Full Text Available Os painéis reconstituídos à base de madeira ganharam espaço antes ocupado pela madeira maciça, o que tem gerado volume expressivo de resíduos. A indústria moveleira contribui para a geração desses resíduos, que se apresentam como alternativa viável para a exploração de sua aplicação na produção artesanal de pequenos objetos. Este trabalho teve por objetivo produzir pequenos objetos com painéis e com mistura de resíduos de painéis de madeira, a fim de comparar suas qualidades. A partir de 10 projetos gráficos, três artesãos confeccionaram 10 pequenos objetos, utilizando painéis de MDF (Medium Density Fiberboard, OSB (Oriented Strand Board e compensado. Cada artesão produziu nove exemplares de cada objeto. Um quarto artesão confeccionou os mesmos objetos com resíduos de três empresas do polo moveleiro da cidade de Ubá, MG, com três repetições, sendo comparados os atributos de qualidade dos objetos. Concluiu-se que todos os painéis são adequados para a confecção dos objetos e alguns se destacam em relação a outros, conforme o atributo avaliado. Os objetos confeccionados com a mistura de resíduos de painéis de madeira tiveram acabamento uniforme e não apresentaram diferenças significativas em relação aos produzidos com painéis com relação aos atributos funcionalidade, peso, proporção e simetria. A mistura de resíduos de diferentes painéis influenciou negativamente a avaliação dos atributos acabamento, beleza e cor. Um objeto produzido a partir de resíduos do mesmo painel pode ser mais harmonioso e atrativo. É tecnicamente viável a produção de pequenos objetos a partir de resíduos de painéis de madeira vindos de indústrias moveleiras.Wood residue panels have been used in substitution of solid wood. As a consequence, the volume of residues has been increasing day-by-day. The furniture industries are the major generators of these residues. Their use as raw material for the production of

  6. 40 CFR 60.3064 - What must I do if I close my air curtain incinerator that burns only wood waste, clean lumber...

    Science.gov (United States)

    2010-07-01

    ... curtain incinerator that burns only wood waste, clean lumber, and yard waste and then restart it? 60.3064... Other Solid Waste Incineration Units That Commenced Construction On or Before December 9, 2004 Model Rule-Air Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.3064 What...

  7. The classification of wood chips parameters by crushing of waste cane from different varieties of grapevine

    Directory of Open Access Journals (Sweden)

    Patrik Burg

    2008-01-01

    Full Text Available This work deales with exploitatives parameters monitoring of wood shreder PEZZOLATO 110 Mb by crushing of waste cane of six varieties. The results shows that the wood shreders efficiency, fuel consumption and the wood chips elements size can be influenced by varieties characters of cane. The va­lued machines efficiency was 230–470 kg . h−1 by average volume 40.70 % water in wood. The hig­hest values by cane crushing had the variety Saint Laurent (0.47 t . h−1 and the lowest variety ­Blauer Portugieser (0.23 t . h−1. The specific consumption of petrol Natural 95 was 4.52.10−3–8.12.10−3 l . kg−1. The average middle elements lenght was 6.64 mm by crushed varieties.

  8. Fellin Furniture - disainitud kasutamiseks

    Index Scriptorium Estoniae

    2010-01-01

    Viljandis asuvast mööbliettevõttest Fellinn Furniture ja seal valmistatavast mööblist. Kollektsiooni algsed loojad on disainerid Sixten Heidmets ja Sirli Ehari. Disainis on kasutatud elemente, mis võimaldavad toodete väljanägemist kergesti muuta ja hõlpsasti ruumis paigutada. Valmistatakse ka uusi tooteid, mille disainimisele on kaasa aidanud kogu Fellin Furniture meeskond

  9. Fluidized-Bed Gasification of Plastic Waste, Wood, and Their Blends with Coal

    Directory of Open Access Journals (Sweden)

    Lucio Zaccariello

    2015-08-01

    Full Text Available The effect of fuel composition on gasification process performance was investigated by performing mass and energy balances on a pre-pilot scale bubbling fluidized bed reactor fed with mixtures of plastic waste, wood, and coal. The fuels containing plastic waste produced less H2, CO, and CO2 and more light hydrocarbons than the fuels including biomass. The lower heating value (LHV progressively increased from 5.1 to 7.9 MJ/Nm3 when the plastic waste fraction was moved from 0% to 100%. Higher carbonaceous fines production was associated with the fuel containing a large fraction of coal (60%, producing 87.5 g/kgFuel compared to only 1.0 g/kgFuel obtained during the gasification test with just plastic waste. Conversely, plastic waste gasification produced the highest tar yield, 161.9 g/kgFuel, while woody biomass generated only 13.4 g/kgFuel. Wood gasification showed a carbon conversion efficiency (CCE of 0.93, while the tests with two fuels containing coal showed lowest CCE values (0.78 and 0.70, respectively. Plastic waste and wood gasification presented similar cold gas efficiency (CGE values (0.75 and 0.76, respectively, while that obtained during the co-gasification tests varied from 0.53 to 0.73.

  10. Woody residues and solid waste wood available for recovery in the United States, 2002

    Science.gov (United States)

    David B. McKeever; Robert H. Falk

    2004-01-01

    Large amounts of woody residues and solid wood waste are generated annually in the United States from the extraction of timber from forests, from forestry cultural operations, in the conversion of forest land to nonforest uses, in the initial processing of roundwood timber into usable products, in the construction and demolition of buildings and structures, and in the...

  11. Inventories of woody residues and solid wood waste in the United States, 2002

    Science.gov (United States)

    David B. McKeever

    2004-01-01

    Large amounts of woody residues and wood waste are generated annually in the United States. In 2002, an estimated 240 million metric tons was generated during the extraction of timber from the Nation’s forests, from forestry cultural operations, in the conversion of forest land to nonforest uses, in the initial processing of roundwood timber into usable products, in...

  12. Wood wastes and residues generated along the Colorado Front Range as a potential fuel source

    Science.gov (United States)

    Julie E. Ward; Kurt H. Mackes; Dennis L. Lynch

    2004-01-01

    Throughout the United States there is interest in utilizing renewable fuel sources as an alternative to coal and nat-ural gas. This project was initiated to determine the availability of wood wastes and residues for use as fuel in ce-ment kilns and power plants located along the Colorado Front Range. Research was conducted through literature searches, phone surveys,...

  13. Co-combustion of gasified contaminated waste wood in a coal fired power plant

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    This project demonstrates the technical and economical feasibility of the producing and cofiring of product gas from demolition waste wood. For this purpose LCV product gas is generated in an atmospheric circulating fluidized bed (CFB) gasification plant, cooled and cleaned and transported to the boiler of a 600 MWe pulverized coal fired power plant. Gas cooling and cleaning takes place in a waste heat boiler and a multi stage wet gas cleaning train. Steam raised in the waste heat boiler is exported to the power plant. On an annual basis 70,000 tons of steam coal are substituted by 150,000 tons of contaminated demolition waste wood (50,000 tons oil equivalent), resulting in a net CO2 emission reduction of 170,000 tons per year, while concurrently generating 205 GWh of electrical power. The wood gasification plant was built by NV EPZ (now incorporated in Essent Energi BV) for Amergas BV, now a 100% subsidiary of Essent Energie BV. The gasification plant is located at the Amer Power Station of NV EPZ Production (now Essent Generation) at Geertruidenberg, The Netherlands. Demonstrating several important design features in wood gasification, the plant started hot service in the Spring of 2000, with first gasification accomplished in the Summer of 2000 and is currently being optimized. (au)

  14. LAND TREATMENT AND THE TOXICITY RESPONSE OF SOIL CONTAMINATED WITH WOOD PRESERVING WASTE

    Science.gov (United States)

    Soils contaminated with wood preserving wastes, including pentachlo-rophenol (PCP) and creosote, are treated at field-scale in an engineered prepared-bed system consisting of two one-acre land treatment units (LTUs). The concentration of selected indicator compounds of treatment ...

  15. Wood

    Science.gov (United States)

    David W. Green; Robert H. White; Antoni TenWolde; William Simpson; Joseph Murphy; Robert J. Ross; Roland Hernandez; Stan T. Lebow

    2006-01-01

    Wood is a naturally formed organic material consisting essentially of elongated tubular elements called cells arranged in a parallel manner for the most part. These cells vary in dimensions and wall thickness with position in the tree, age, conditions of growth, and kind of tree. The walls of the cells are formed principally of chain molecules of cellulose, polymerized...

  16. Pilot-scale investigation of the robustness and efficiency of a copper-based treated wood wastes recycling process

    Energy Technology Data Exchange (ETDEWEB)

    Coudert, Lucie [INRS-ETE (Canada); Blais, Jean-François, E-mail: blaisjf@ete.inrs.ca [INRS-ETE (Canada); Mercier, Guy [INRS-ETE (Canada); Cooper, Paul [University of Toronto (Canada); Gastonguay, Louis [IREQ (Canada); Morris, Paul [FPInnovations (Canada); Janin, Amélie; Reynier, Nicolas [INRS-ETE (Canada)

    2013-10-15

    Highlights: • A leaching process was studied for metals removal from CCA-treated wood wastes. • This decontamination process was studied at pilot scale (130-L reactor). • Removals up to 98% of As, 88% of Cr, and 96% of Cu were obtained from wood wastes. • The produced leachates can be treated by chemical precipitation. -- Abstract: The disposal of metal-bearing treated wood wastes is becoming an environmental challenge. An efficient recycling process based on sulfuric acid leaching has been developed to remove metals from copper-based treated wood chips (0 < x < 12 mm). The present study explored the performance and the robustness of this technology in removing metals from copper-based treated wood wastes at a pilot plant scale (130-L reactor tank). After 3× 2 h leaching steps followed by 3× 7 min rinsing steps, up to 97.5% of As, 87.9% of Cr, and 96.1% of Cu were removed from CCA-treated wood wastes with different initial metal loading (>7.3 kg m{sup −3}) and more than 94.5% of Cu was removed from ACQ-, CA- and MCQ-treated wood. The treatment of effluents by precipitation–coagulation was highly efficient; allowing removals more than 93% for the As, Cr, and Cu contained in the effluent. The economic analysis included operating costs, indirect costs and revenues related to remediated wood sales. The economic analysis concluded that CCA-treated wood wastes remediation can lead to a benefit of 53.7 US$ t{sup −1} or a cost of 35.5 US$ t{sup −1} and that ACQ-, CA- and MCQ-treated wood wastes recycling led to benefits ranging from 9.3 to 21.2 US$ t{sup −1}.

  17. Use of lasers in the furniture industry

    Science.gov (United States)

    Wieloch, Grzegorz; Pohl, Piotr

    1995-03-01

    One of the ways of using laser in industry is its usage in loss treatment of wood and composite wood products. In the furniture industry the above mentioned machining is used in such technological processes in which tool machining (sawing, molding) is not economical or even possible. These processes are mainly curvilinear cutting of layer materials like veneers, plywood, and face layers and thicker materials like particleboards, fiberboards, and lumber- core panels. Wide usage has also been achieved in heat treatment in wood for decoration. It can be calcinating designs, engraving them, blackening of parts of surfaces, or changing of anatomic characteristics of wood tissue. Nevertheless laser usage in recliner cutting seems at present causeless.

  18. 40 CFR 60.3063 - When must I comply if my air curtain incinerator burns only wood waste, clean lumber, and yard...

    Science.gov (United States)

    2010-07-01

    ... incinerator burns only wood waste, clean lumber, and yard waste? 60.3063 Section 60.3063 Protection of... Units That Commenced Construction On or Before December 9, 2004 Model Rule-Air Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.3063 When must I comply if my air curtain...

  19. 40 CFR 60.3067 - How must I monitor opacity for air curtain incinerators that burn only wood waste, clean lumber...

    Science.gov (United States)

    2010-07-01

    ... curtain incinerators that burn only wood waste, clean lumber, and yard waste? 60.3067 Section 60.3067... Incineration Units That Commenced Construction On or Before December 9, 2004 Model Rule-Air Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.3067 How must I monitor opacity for...

  20. 40 CFR 62.14820 - How must I monitor opacity for air curtain incinerators that burn 100 percent wood wastes, clean...

    Science.gov (United States)

    2010-07-01

    ... curtain incinerators that burn 100 percent wood wastes, clean lumber, and/or yard waste? 62.14820 Section... Requirements for Commercial and Industrial Solid Waste Incineration Units That Commenced Construction On or Before November 30, 1999 Air Curtain Incinerators That Burn 100 Percent Wood Wastes, Clean Lumber And/or...

  1. U.S. Competitiveness Study: How Furniture and Cabinet Manufacturers Compare

    Science.gov (United States)

    Urs Buehlmann; Matthew Bumgardner; Al Schuler; Rich Christianson

    2003-01-01

    A disturbing 37.2%, of the 341 manufacturing executives participating in the U.S. Wood Competitiveness Survey either strongly agreed or agreed "that by the end of the decade, little will remain of domestic wood furniture and other wood products manufacturing in the United States."

  2. 78 FR 70267 - Multilayered Wood Flooring From the People's Republic of China: Preliminary Results of...

    Science.gov (United States)

    2013-11-25

    .... (``Armstrong''), Fine Furniture (Shanghai) Limited (``Fine Furniture'') and Zhejiang Layo Wood Industry Co... dumping margin Exporter (percent) Minglin 0.00 (de minimis) Fine Furniture 0.67 Layo Wood 8.85 Armstrong 8... Guangdong Fu Lin Timber Technology 4.77 Limited. Guangdong Yihua Timber Industry Co., 4.77 Ltd. Guangzhou...

  3. Sodium alginate adhesives as binders in wood fibers/textile waste fibers biocomposites for building insulation.

    Science.gov (United States)

    Lacoste, Clément; El Hage, Roland; Bergeret, Anne; Corn, Stéphane; Lacroix, Patrick

    2018-03-15

    Alginate derived from seaweed is a natural polysaccharide able to form stable gel through carbohydrate functional groups largely used in the food and pharmaceutical industry. This article deals with the use of sodium alginate as an adhesive binder for wood fibres/textile waste fibres biocomposites. Several aldehyde-based crosslinking agents (glyoxal, glutaraldehyde) were compared for various wood/textile waste ratios (100/0, 50/50, 60/40, 70/30 and 0/100 in weight). The fully biomass derived composites whose properties are herewith described satisfy most of the appropriate requirements for building materials. They are insulating with a thermal conductivity in the range 0.078-0.089 W/m/K for an average density in the range 308-333 kg/m3 according to the biocomposite considered. They are semi-rigid with a maximal mechanical strength of 0.84 MPa under bending and 0.44 MPa under compression for 60/40 w/w wood/textile waste biocomposites with a glutaraldehyde crosslinking agent. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. CALORIFIC PROPERTIES OF WASTES FROM SOME EXOTIC WOOD SPECIES

    Directory of Open Access Journals (Sweden)

    Aurel LUNGULEASA

    2016-03-01

    Full Text Available This paper aims to present some results about the calorific properties of biomass wastes from exotic species used as fuels. There are presented the main characteristics of biomass energy, respectively the low and high calorific value, burning speed and energy efficiency. Methodology takes into consideration the equipment, wooden species and relationships for calorific determination. The final conclusion resulting from the experiments is that the biomass of exotic species is as good as any other woody biomass, when is used as fuel, because the calorific properties are closely, even slightly higher than of classical fuels.

  5. LEATHER WASTE VALORISATION THROUGH MATERIAL INNOVATION: SOME PROPERTIES OF LEATHER WOOD FIBREBOARD

    Directory of Open Access Journals (Sweden)

    Axel M. RINDLER

    2015-12-01

    Full Text Available Due to the ever-increasing scarcity of resources and raw materials in the wood panels industry, it is imperative to look for suitable alternatives to the established resources. Therefore a combination of the traditionally used and newly explored sources may reveal highly innovative ways. The objective of this study is to provide an insight into the behavior of the material and possible new applications of those fiber/particle wood and waste leather composites. For this reason exclusively fibers of spruce were used for the trials. Wet white (WW leather particles and wet blue (WB leather particles were mixed with the wooden materials for the production of high density fibreboards. Besides the mechanical properties such as the internal bond (IB the bending strength (MOR and modulus of elasticity (MOE was analyzed. Further physical property as thickness swelling after 24h watering was investigated. To analyze how the density influences the behavior under thermal conditions, fiberboards with the densities 500, 700 and 900 kg/m³ were tested. The results of the material properties were influenced by the leather content of the panels. The results for the UF-bonded HDF boards show enhancement of the transverse IB with increasing wet blue leather content, whereas the other mechanical properties decline meanwhile. The thickness swelling showed higher values compared to the wood fibreboard. The results of this study underline the usefulness of integrating leather shavings to HDF and give an overview of their influence in wood fiber materials. The combination of the natural resource wood fiber and the leather waste products (Wet Blue and Wet White gives a very interesting new material, its mechanical properties allow a variety of possible application in future applications.

  6. Metal loss from treated wood products in contact with municipal solid waste landfill leachate

    Energy Technology Data Exchange (ETDEWEB)

    Dubey, Brajesh [Department of Environmental Health, PO Box 70682, East Tennessee State University, Johnson City, TN 37614 (United States); Department of Environmental Engineering Sciences, University of Florida, Gainesville, FL 32611-6450 (United States); Townsend, Timothy, E-mail: ttown@ufl.edu [Department of Environmental Engineering Sciences, University of Florida, Gainesville, FL 32611-6450 (United States); Solo-Gabriele, Helena [Department of Civil, Architectural and Environmental Engineering, University of Miami, Coral Gables, FL 33124-0630 (United States)

    2010-03-15

    The research presented in this paper evaluates the potential impact of municipal solid waste (MSW) landfill leachate quality on the loss of metals from discarded treated wood during disposal. The loss of arsenic (As), chromium (Cr), copper (Cu), and boron (B) from several types of pressure-treated wood (CCA: chromated copper arsenate, ACQ: alkaline copper quaternary, CBA: copper boron azole, and DOT: disodium octaborate tetrahydrate) using leachate collected from 26 MSW landfills in Florida was examined. The toxicity characteristic leaching procedure (TCLP), the synthetic precipitation leaching procedure (SPLP), and California's waste extraction test (WET) were also performed. The results suggested that loss of preservative components was influenced by leachate chemistry. Copper loss from CCA-, ACQ- and CBA-treated wood was similar in magnitude when in contact with landfill leachates compared to synthetic TCLP and SPLP solutions. Ammonia was found as one of the major parameters influencing the leaching of Cu from treated wood when leached with MSW landfill leachates. The results suggest that disposal of ACQ- and CBA-treated wood in substantial quantity in MSW landfills may elevate the Cu concentration in the leachate; this could be of potential concern, especially for a bioreactor MSW landfill in which relatively higher ammonia concentrations in leachate have been reported in recent literature. For the As, Cr and B the concentrations observed with the landfill leachate as the leaching solutions were over a range from some sample showing the concentrations below and some showing above the observed value from corresponding SPLP and TCLP tests. In general the WET test showed the highest concentrations.

  7. Methane and organic fertilizers from wood waste and manure fermentations

    Energy Technology Data Exchange (ETDEWEB)

    Romashkevich, I F; Karelina, G N

    1961-01-01

    Fermentation of sawdust of foliate trees by mesophyllic microflora is feasible, producing CH/sub 4/; the yield of gas is 500 cu m/ton, which surpasses that from manure and other agricultural wastes. Preliminary acid hydrolysis is unnecessary. At 5% organic matter, sawdust fermentation proceeds normally and with good yield, but 10% initial concentration of organic matter results in poor performance. Fermentation of common manure, that of sawdust and manure, or that of sawdust alone yields essentially the same gases. Fir sawdust does not ferment, but it does not stop manure or ash sawdust from fermenting if mixed with these. Fermented sawdust behaves like a fertilizer; it is beneficial to plants and crops. Nonfermented sawdust does not. Lupine N content is increased by both fermented and nonfermented sawdusts.

  8. Progressive technologies in furniture design

    OpenAIRE

    Šebková, Martina

    2014-01-01

    Šebková, M. Progressive technologies in furniture design. Diploma thesis, Brno, Mendel University in Brno, 2014 Diploma thesis 'Progressive technologies in furniture design' is focused on the use of modern technologies in furniture production. The theoretical part explains the basic terms, technology and material options. It focuses mainly on the production of 3D printed furniture and possibilities of virtual testing, measurements, scanning and rapid prototyping. Practical part of diploma the...

  9. Whither North Carolina furniture manufacturing?

    OpenAIRE

    Robert L. Lacy

    2004-01-01

    North Carolina's furniture manufacturing industry has contracted in recent years as imports have gained a greater share of the domestic furniture market. Rapid growth of the furniture industry in China and a surge in exports from that country to the United States in particular have contributed to plant closings and consolidation of operations in the state. North Carolina's furniture manufacturers are adapting to the emergence of global competition and are developing new corporate strategies t...

  10. Sources of heavy metal contamination in Swedish wood waste used for combustion

    International Nuclear Information System (INIS)

    Krook, J.; Martensson, A.; Eklund, M.

    2006-01-01

    In this paper, wood waste (RWW) recovered for heat production in Sweden was studied. Previous research has concluded that RWW contains elevated amounts of heavy metals, causing environmental problems during waste management. This study extends previous work on RWW by analysing which pollution sources cause this contamination. Using existing data on the metal contents in various materials, and the amounts of these materials in RWW, the share of the elevated amounts of metals in RWW that these materials explain was quantified. Six different materials occurring in RWW were studied and the results show that they explain from 70% to 100% of the amounts of arsenic, chromium, lead, copper and zinc in RWW. The most important materials contributing to contamination of RWW are surface-treated wood, industrial preservative-treated wood, plastic and galvanised fastening systems. These findings enable the development and evaluation of strategies aiming to decrease pollution and resource loss from handling RWW. It is argued that source separation and measures taken further downstream from the generation site, such as treatment, need to be combined to substantially decrease the amount of heavy metals in RWW

  11. Life-cycle assessment for power generation from wood fuels and wood wastes; Oekobilanz fuer die Stromerzeugung aus Holzbrennstoffen und Altholz

    Energy Technology Data Exchange (ETDEWEB)

    Jungbluth, N.; Frischknecht, R.; Faist, M.

    2002-07-01

    This reworked final report for the Swiss Federal Office of Energy (SFOE) presents the results of life-cycle assessments made of four wood-fired systems with the goal of analysing the possibilities of labelling such plants with the Swiss eco-label 'Naturemade Star'. In addition to these case studies, three standard technologies were modelled, whereby in two of the models different waste gas filtering methods were considered. In the third model, electricity is produced from waste wood and features an advanced waste gas treatment system. The report describes the various plants and draws up eco-balances for them. Pollution emissions, such as dust, oxides of nitrogen and sulphur dioxide, are discussed and plant operation and assessment are looked at. Certification to 'Naturemade Star' standards is checked out for the case-study plant examples and for the standard plant proposed. A further eco-balance is drawn up for wood-fired power generation with impact allocated to heat and power generation based on exergy content. An appendix provides details on the physical parameters of wood and on the methods used for impact assessment.

  12. Second-generation bioethanol from industrial wood waste of South American species

    Directory of Open Access Journals (Sweden)

    María E. Vallejos

    2017-09-01

    Full Text Available There is a global interest in replacing fossil fuels with renewable sources of energy. The present review evaluates the significance of South-American wood industrial wastes for bioethanol production. Four countries have been chosen for this review, i.e., Argentina, Brazil, Chile, and Uruguay, based on their current or potential forestry industry. It should be noted that although Brazil has a global bioethanol market share of 25%, its production is mainly first-generation bioethanol from sugarcane. The situation in the other countries is even worse, in spite of the fact that they have regulatory frameworks in place already allowing the substitution of a percentage of gasoline by ethanol. Pines and eucalyptus are the usually forested plants in these countries, and their industrial wastes, as chips and sawdust, could serve as promising raw materials to produce second-generation bioethanol in the context of a forest biorefinery. The process to convert woody biomass involves three stages: pretreatment, enzymatic saccharification, and fermentation. The operational conditions of the pretreatment method used are generally defined according to the physical and chemical characteristics of the raw materials and subsequently determine the characteristics of the treated substrates. This article also reviews and discusses the available pretreatment technologies for eucalyptus and pines applicable to South-American industrial wood wastes, their enzymatic hydrolysis yields, and the feasibility of implementing such processes in the mentioned countries in the frame of a biorefinery.

  13. Effect of natural ageing on volume stability of MSW and wood waste incineration residues

    International Nuclear Information System (INIS)

    Gori, Manuela; Bergfeldt, Britta; Reichelt, Jürgen; Sirini, Piero

    2013-01-01

    Highlights: ► Natural weathering on BA from MSW and wood waste incineration was evaluated. ► Type of mineral phases, pH and volume stability were considered. ► Weathering reactions effect in improved stability of the materials. - Abstract: This paper presents the results of a study on the effect of natural weathering on volume stability of bottom ash (BA) from municipal solid waste (MSW) and wood waste incineration. BA samples were taken at different steps of treatment (fresh, 4 weeks and 12 weeks aged) and then characterised for their chemical and mineralogical composition and for volume stability by means of the mineralogical test method (M HMVA-StB), which is part of the German quality control system for using aggregates in road construction (TL Gestein-StB 04). Changes of mineralogical composition with the proceeding of the weathering treatment were also monitored by leaching tests. At the end of the 12 weeks of treatment, almost all the considered samples resulted to be usable without restrictions in road construction with reference to the test parameter volume stability

  14. Biotechnology for in vitro growing of edible and medicinal mushrooms on wood wastes

    Directory of Open Access Journals (Sweden)

    Marian Petre

    2009-11-01

    Full Text Available The aim of this work was focused on finding out the best way to convert the wood wastes into useful food supplements, such as mushroom fruit bodies, by using them as growing sources for the edible and medicinal mushrooms. According to this purpose, three fungal species from Basidiomycetes, namely Ganoderma lucidum (Curt.:Fr. P. Karst, Lentinus edodes (Berkeley Pegler and Pleurotus ostreatus (Jacquin ex Fries Kummer were tested to determine their biological potential to grow on substrates made of wood wastes (sawdusts as well as shavings which could be used in this way as main ingredients for preparation of natural culture composts.The experiments were achieved by in vitro growing of all these fungal species in special rooms, where the main culture parameters were kept at optimal levels in order to get the highest production of mushroom fruit bodies. The effects of culture compost composition (carbon, nitrogen and mineral sources as well as other physical and chemical factors (such as: temperature, inoculum amount, pH level and incubation time, etc. on mycelial net formation and especially on fruit body induction, were investigated. From all these fungal species tested in our experiments, P. ostreatus was registered as the fastest mushroom culture, then L. edodes and finally, G. lucidum asthe longest mushroom culture. During the experiments, different logs of the same species were used as control samples for each culture compost variants. Applying such biotechnology, the environmental problems generated by the plant wastes accumulation in wood industry could be solved only by using biological means for theirvalorising, simultaneously with food supplements producing having high nutritive values as well as healing effects by increasing the consumers` health.

  15. Biotechnology for in vitro growing of edible and medicinal mushrooms on wood wastes

    Directory of Open Access Journals (Sweden)

    Marian Petre

    2009-12-01

    Full Text Available The aim of this work was focused on finding out the best way to convert the wood wastes into useful food supplements, such as mushroom fruit bodies, by using them as growing sources for the edible and medicinal mushrooms. According to this purpose, three fungal species from Basidiomycetes, namely Ganoderma lucidum (Curt.:Fr. P. Karst, Lentinus edodes (Berkeley Pegler and Pleurotus ostreatus (Jacquin ex Fries Kummer were tested to determine their biological potential to grow on substrates made of wood wastes (sawdusts as well as shavings which could be used in this way as main ingredients for preparation of natural culture composts. The experiments were achieved by in vitro growing of all these fungal species in special rooms, where the main culture parameters were kept at optimal levels in order to get the highest production of mushroom fruit bodies. The effects of culture compost composition (carbon, nitrogen and mineral sources as well as other physical and chemical factors (such as: temperature, inoculum amount, pH level and incubation time, etc. on mycelial net formation and especially on fruit body induction, were investigated. From all these fungal species tested in our experiments, P. ostreatus was registered as the fastest mushroom culture, then L. edodes and finally, G. lucidum as the longest mushroom culture. During the experiments, different logs of the same species were used as control samples for each culture compost variants. Applying such biotechnology, the environmental problems generated by the plant wastes accumulation in wood industry could be solved only by using biological means for their valorising, simultaneously with food supplements producing having high nutritive values as well as healing effects by increasing the consumers` health.

  16. Morphology, composition, and mixing state of primary particles from combustion sources ? crop residue, wood, and solid waste

    OpenAIRE

    Liu, Lei; Kong, Shaofei; Zhang, Yinxiao; Wang, Yuanyuan; Xu, Liang; Yan, Qin; Lingaswamy, A. P.; Shi, Zongbo; Lv, Senlin; Niu, Hongya; Shao, Longyi; Hu, Min; Zhang, Daizhou; Chen, Jianmin; Zhang, Xiaoye

    2017-01-01

    Morphology, composition, and mixing state of individual particles emitted from crop residue, wood, and solid waste combustion in a residential stove were analyzed using transmission electron microscopy (TEM). Our study showed that particles from crop residue and apple wood combustion were mainly organic matter (OM) in smoldering phase, whereas soot-OM internally mixed with K in flaming phase. Wild grass combustion in flaming phase released some Cl-rich-OM/soot particles and cardboard combusti...

  17. Climate protection potential in the waste management sector. Examples: municipal waste and waste wood; Klimaschutzpotenziale der Abfallwirtschaft. Am Beispiel von Siedlungsabfaellen und Altholz

    Energy Technology Data Exchange (ETDEWEB)

    Dehoust, Guenter; Schueler, Doris [Oeko-Institut e.V. Institut fuer angewandte Oekologie, Darmstadt (Germany); Vogt, Regine; Giegrich, Juergen [IFEU Institut fuer Energie- und Umweltforschung Heidelberg GmbH (Germany)

    2010-03-15

    In the National Inventory Reports only the direct greenhouse gas emissions of the waste management sector are taken into account. The overall efforts of the waste management sector in terms of reducing greenhouse gas emissions in accordance with the Kyoto Protocol are not, therefore, represented. In particular the efforts related to the separate collection of recyclables from waste and the re-use or energetic use of such recyclables or residue are shown as the savings of other sectors of the production industry and energy industry. This research project has used the methodology of eco-balancing to examine the efforts of the municipal waste management sector - including the use of waste wood - in Germany, the 27 Member States as well as in Turkey, Tunisia and Mexico. The balances referred to the actual balance in 2006 and different optimisation scenarios for 2020. The expenditure resulting from collection, transport, treatment and recycling of waste after it has become available was compared to the savings arising from the secondary products and energy realised from waste. Since the landfilling of untreated municipal waste has been discontinued in Germany, the key potentials of the country have already been fully tapped. Indeed, the contribution of municipal waste management to the reduction of total greenhouse gas emissions amounted to approx. 18 million t CO{sub 2}-eq per annum in 2006 in Germany. In particular, these emission reductions have been brought about by improving treatment techniques (emission reductions in the biological processes and greater energy efficiency in the thermal processes) and by increases in the separate collection and use of recyclable materials stemming from municipal waste and waste wood. If both strategies are combined, there is still an optimisation potential for reducing greenhouse gas emissions of 10 million t CO{sub 2}-eq per annum. Compared to 1990 data taken from previous assessments, the overall reduction amounts to approx. 56

  18. SOLID FUEL OF HYDROCARBON, WOOD AND AGRICULTURAL WASTE FOR LOCAL HEAT SUPPLY SYSTEMS

    Directory of Open Access Journals (Sweden)

    B. M. Khroustalev

    2017-01-01

    Full Text Available In Belarus oil refining and oil producing industries are paid close attention. On the background of the active maintaining the level of oil processing and volume of oil extraction in our country and in the countries of the Eurasian Economic Union there is a steady formation of hydrocarbon-containing waste; therefore recycling of the latter is an urgent task to improve the competitiveness of production. The most cost-effective way of using hydrocarbon waste is the conversion of it into power resources. In this case it is possible to obtain significant power-saving and economic effect of the combined use of a hydrocarbon, wood, agricultural and other combustible waste, meanwhile improving the ecological situation at the sites of waste storage and creating a solid fuel with the necessary energy and specified physical-and-chemical properties. A comprehensive solution of a recycling problem makes it possible to use as energy resources a lot of waste that has not found application in other technologies, to produce alternative multi-component fuel which structure meets environmental and energy requirement for local heating systems. In addition, the implementation of such technology will make it possible to reduce power consumption of enterprises of various kinds that consume fuel and will also increase the share of local fuels in the energy balance of a particular region.

  19. Counter-current acid leaching process for copper azole treated wood waste.

    Science.gov (United States)

    Janin, Amélie; Riche, Pauline; Blais, Jean-François; Mercier, Guy; Cooper, Paul; Morris, Paul

    2012-09-01

    This study explores the performance of a counter-current leaching process (CCLP) for copper extraction from copper azole treated wood waste for recycling of wood and copper. The leaching process uses three acid leaching steps with 0.1 M H2SO4 at 75degrees C and 15% slurry density followed by three rinses with water. Copper is recovered from the leachate using electrodeposition at 5 amperes (A) for 75 min. Ten counter-current remediation cycles were completed achieving > or = 94% copper extraction from the wood during the 10 cycles; 80-90% of the copper was recovered from the extract solution by electrodeposition. The counter-current leaching process reduced acid consumption by 86% and effluent discharge volume was 12 times lower compared with the same process without use of counter-current leaching. However, the reuse of leachates from one leaching step to another released dissolved organic carbon and caused its build-up in the early cycles.

  20. Decline in the U.S. furniture industry: a case study of the impacts to the hardwood lumber supply chain

    Science.gov (United States)

    Shawn T. Grushecky; Urs Buehlmann; Al Schuler; William Luppold; Ed Cesa

    2006-01-01

    Traditionally, the wood household furniture industry has accounted for a sizeable portion of total hardwood lumber use in the United States. However, for more than a decade, imports have gained an increasing share of the hardwood furniture market, and lumber consumption by this industry has declined dramatically in the last 5 years. We used a case study methodology to...

  1. Furniture Firm Van Den Berghe-Pauvers: Fully-fledged Partner in the Postwar Promotion of Modern Design in Belgium

    NARCIS (Netherlands)

    Flore, F.M.W.

    2013-01-01

    After the Second World War, the Belgian furniture industry responded slowly to the international developments in the field of modern design. For many years, it remained largely focused on the use of solid wood, traditional craftsmanship, and the production of "style furniture" - a term that refers

  2. Exploring the role of wood waste landfills in early detection of non-native alien wood-boring beetles

    Science.gov (United States)

    Davide Rassati; Massimo Faccoli; Lorenzo Marini; Robert A. Haack; Andrea Battisti; Edoardo. Petrucco Toffolo

    2015-01-01

    Non-native wood-boring beetles (Coleoptera) represent one of the most commonly intercepted groups of insects at ports worldwide. The development of early detection methods is a crucial step when implementing rapid response programs so that non-native wood-boring beetles can be quickly detected and a timely action plan can be produced. However, due to the limited...

  3. Regular Recycling of Wood Ash to Prevent Waste Production (RecAsh). Technical Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Lars E-mail: lars.t.andersson@skogsstyreslen.se

    2007-03-15

    At present, the extraction of harvest residues is predicted to increase in Sweden and Finland. As an effect of the intensified harvesting, the export of nutrients and acid buffering substances from the growth site is also increased. Wood ash could be used to compensate forest soils for such losses. Most wood fuel ash is today often deposited in landfills. If the wood ash is recycled, wood energy is produced without any significant waste production. Ash recycling would therefore contribute to decreasing the production of waste, and to maintaining the chemical quality of forest waters and biological productivity of forest soils in the long term. The project has developed, analysed and demonstrated two regular ash-recycling systems. It has also distributed knowledge gathered about motives for ash recycling as well as technical and administrative solutions through a range of media (handbooks, workshops, field demonstrations, reports, web page and information videos). Hopefully, the project will contribute to decreasing waste problems related to bio-energy production in the EU at large. The project has been organised as a separate structure at the beneficiary and divided in four geographically defined subprojects, one in Finland and three in Sweden (Central Sweden, Northern Sweden, and South-western Sweden). The work in each subproject has been lead by a subproject leader. Each subproject has organised a regional reference group. A project steering committee has been established consisting of senior officials from all concerned partners. The project had nine main tasks with the following main expected deliverables and output: 1. Development of two complete full-scale ash-recycling systems; 2. Production of handbooks of the ash recycling system; 3. Ash classification study to support national actions for recommendations; 4. Organise regional demonstrations of various technical options for ash treatment and spreading; 5. Organise national seminars and demonstrations of

  4. The economics of particulate pollution abatement technologies for wood-waste-fired combustors

    International Nuclear Information System (INIS)

    Ismail, A.; Stevenson, D.H.

    1991-07-01

    A study was conducted to quantify the impact of new and improved particulate abatement equipment (PAE) on the economics of new and existing wood waste combustion systems. The operating characteristics of current PAE technology are summarized and the basis for cost estimates is established. The technologies include multicyclone collectors, wet scrubbers, fabric filter baghouses, electrostatic precipitators, and new versus retrofit installations. Capital costs were determined for 4 generic types of PAE and 4 cases for each PAE type according to GJ/h in steam enthalpy. Cost information was developed for wood waste energy systems with and without PAE. In the cost analysis, a hypothetical steam selling price is determined which will give a 25% return on pretax cash flow over a 20-year period. Additional costs of the PAE are applied to the energy system cash flows and the impact on average annual return is calculated. Results indicate reductions in internal rate of return of 3-6% for most PAE systems. 54 refs., 2 figs., 12 tabs

  5. Some Exploitation Properties of Wood Plastic Hybrid Composites Based on Polypropylene and Plywood Production Waste

    Science.gov (United States)

    Kajaks, Janis; Kalnins, Karlis; Uzulis, Sandris; Matvejs, Juris

    2015-12-01

    During the last 20-30 years many researchers have paid attention to the studies of properties of thewood polymer composites (WPC). A lot of works are closely related to investigations of exploitation properties of wood fibres or wood flour containing polyolefine composites [1, 2]. The most useful from wide selection of polyolefines are polypropylenes, but timber industry waste materials comprising lignocellulose fibres are often used as reinforcement of WPC [3-12]. Plywood industry is not an exception - part of waste materials (by-products) are used for heat energy, i.e. burned. In this work we have approbated reinforcing of polypropylene (PP) with one of the plywood industry by-products, such as birch plywood sawdust (PSWD),which containswood fibre fractions with different length [13]. The main fraction (50%) includes fibres with length l = 0.5 - 1 mm. Our previous study [13] has confirmed that PSWD is a promising filler for PP reinforcing. Addition of PSWD up to 40-50 wt.% has increased WPC tensile and flexural modulus, but decreased deformation ability of PP matrix, impact strength, water resistance and fluidity of composite melts. It was shown [13] that modification of the composites with interfacial modifier - coupling agent maleated polypropylene (MAPP content up to 5-7 wt.%) considerably improved all the abovementioned properties. SEM investigations also confirmed positive action of coupling agent on strengthening of adhesion interaction between components wood and PP matrix. Another way how to make better properties of the WPC is to form hybridcomposites [1, 14-24]. Very popular WPC modifiers are nanoparticle additions like organonanoclays, which increase WPC physical-mechanical properties - microhardness, water resistance and diminish barrier properties and combustibility [1, 2, 14-17, 19, 20]. The goal of this study was to investigate organonanoclays influence on plywood production industry by-product birch plywood sawdust (PSWD) containing

  6. Evaluating selected demographic factors related to consumer preferences for furniture from commercial and from underutilized species.

    Science.gov (United States)

    David Nicholls; Matthew Bumgardner

    2007-01-01

    This technical note describes consumer preferences within selected demographic categories in two major Pacific Northwest markets for six domestic wood species. These woods were considered for construction of four furniture pieces. Chi-square tests were performed to determine species preferences based on gender, age, and income. Age and income were statistically...

  7. Evaluating selected demographic factors related to consumer preferences for furniture from commercial and from underutilized species

    Science.gov (United States)

    David Nicholls; Matthew Bumgardner

    2007-01-01

    This technical note describes consumer preferences within selected demographic categories in two major Pacific Northwest markets for six domestic wood species. These woods were considered for construction of four furniture pieces. Chi-square tests were performed to determine species preferences based on gender, age, and income. Age and income were statistically...

  8. Characteristics and availability of commercially important woods

    Science.gov (United States)

    Regis B. Miller

    1999-01-01

    Throughout history, the unique characteristics and comparative abundance of wood have made it a natural material for homes and other structures, furniture, tools, vehicles, and decorative objects. Today, for the same reasons, wood is prized for a multitude of uses. All wood is composed of cellulose, lignin, hemicelluloses, and minor amounts (5% to 10%) of extraneous...

  9. WOOD PROPERTIES AND EFFECT OF WOOD PROPERTIES ON THE WOOD FINISHING

    Directory of Open Access Journals (Sweden)

    Abdulkadir Malkoçoğlu

    2006-04-01

    Full Text Available Wood is basic raw material for furniture and joinery industries with wood structures. Wood is a biological material that has widely different properties depending on species, geographic area where the tree grew, the growth condition, size of the tree at harvest, sawing, and other manufacturing processes. Wood properties have been characterized within two groups as natural and manufacturing factors that effects finishing performance. Grow rate, density, knots, moisture content, extractives and juvenile wood are natural characteristics. Grain orientation, texture, drying and performance expectations are manufacturing characteristics. In this review, the effects of natural and manufacturing characteristics are discussed on the surface finishing performance of wood.

  10. Sweetgum - an American wood

    Science.gov (United States)

    C. B. Briscoe

    1973-01-01

    Sweetgum grows throughout most of the eastern United States and sporadically throughout Mexico and Central America. The wood is moderately heavy, even-textured, and it machines moderately well. It is used for a variety of purposes, with furniture, plywood, containers, and pulp absorbing the most volume. Growth is good, but supplies are slowly diminishing because the...

  11. Technologies for the commercial energetic utilisation of waste wood and used wood; Technologien zur energetischen Nutzung von Holzabfaellen und Gebrauchsholz im gewerblichen Bereich

    Energy Technology Data Exchange (ETDEWEB)

    Marutzky, R.

    1998-12-31

    Due to the frequent contamination of wood with wood preservatives, coatings, adhesives, paints and other non-wood materials the conversion of production residues and various types of used wood to energy appears to be fraught with problems. However, extensive studies conducted during the past years have shown that most problems regarding combustion residues and emissions have been overestimated. Thanks to new technologies it is now possible to avoid or at least reduce the formation of pollutants during combustion of even complexly contaminated waste wood. Environmentally acceptable combustion of wood presupposes complete combustion, effective dedusting, and primary measures for nitrogen oxide control. Depending on the type of feedstock and the relevant emission limit values one may optionally include secondary nitric oxides removal measures and control techniques for partially volatile heavy metals and halocarbons. Moreover, firing plants must be so conditioned as to keep the new synthesis of dioxins at a low level. [Deutsch] Die energetische Verwertung von Produktionsabfaellen und Gebrauchtholzsortimenten scheint wegen der haeufig vorhandenen Belastung der Hoelzer mit Holzschutzmitteln, Oberflaechenbeschichtungen, Klebstoffen, Farbanstrichen und andere holzfremden Bestandteilen schwierig zu sein. Tatsaechlich sind - wie umfangreiche Untersuchungen der letzten Jahre gezeigt haben - die meisten Probleme in Hinblick auf Ausbrand und Emissionen ueberschaetzt worden. Durch Weiterentwicklung von Anlagen- und Regelungstechnik ist es heute moeglich, die Schadstoffbildung bei der Verbrennung auch komplex belasteter Holzabfaelle zu vermeiden oder zu vermindern. Voraussetzungen einer umweltvertraeglichen Verbrennung von Holz sind - ein guter Ausbrand, - eine effektive Entstaubung, - und primaere Massnahmen der Stickstoffoxidminderung. Optional kommen je nach Brennstoff und Emissionsgrenzwert noch sekundaere Entstickungsmassnahmen und Minderungstechniken fuer partiell

  12. Increasing Effort in Using the Waste of Mangrove Wood for Natural Dyes

    International Nuclear Information System (INIS)

    Kuntari-Sasas; Sri-Sunaryati; G, Isminingsih; Santosa; Mirtha

    2000-01-01

    The general function of mangrove forest is mainly for protecting thesustain ability of sea shore against the wave toss, however, the fishermenhas often used the mangrove wood to produce their ships, building and otherthings. Among others, this wood also contains of chromophore, tannine,furfurol and phtalic that has the possibility to serve as textile dyes,however its fixation ability to silk fiber in this dyes does not have strongfixation ability to silk fiber. In other to improve its color fastness it wasnecessary to do after treatment with mordant. In this study the waste fromthe mangrove in the form of shredded wood, wood bark or twig and small branchwere used as the raw material of the natural dyes. This materials werechopped as small as possible (into saw form) and being extracted in order toobtain the dyes as much as possible. As the result of this study wasaddressed to the small and medium scale industries, the extraction processwas carried out in a simple way using water as medium with various ratios inthe respected order 1:10; 1:20; 1:30; 1:40; and 1 :50. To obtain theextracted yields, the mangrove waste was extracted until it reached the ratioof 1/5 to the medium, the extracted sample was taken out to be extractedagain in fresh water as medium in the same ratio variation. This process wasrepeated until no more wood color to be extracted (± 9 repeats). Theextracted liquid was then put into evaporation, drying and grinded into dyespowder. The highest extracted yields was obtained by the ratio to medium(1:40 to 1:50) with 9.40% -9.48% extracted yields. The following experimentwas dyeing process to silk fabrics by using dyes powder or dyes liquidextracted from medium with ratio 1:40 mixture from first extraction up toforth extraction. The dyeing process was carried out without mordanting,pre-mordanting and post-mordanting, by means of Tawas (Al 2 K 2 (SO 4 ) 3 ) orTunjung (FeSO 4 . 7 H 2 O) as mordanting material. The dyed silk fabrics werethen tested for

  13. Corrosivity of hot flue gases in the fluidized bed combustion of recovered waste wood

    Energy Technology Data Exchange (ETDEWEB)

    Enestam, S.

    2011-07-01

    In recent years, recovered waste wood has become a fuel of interest due to its green energy benefits and low price compared to virgin wood-based fuels. However, waste wood is often contaminated with paint, plastic, and metal components, producing concentrations of heavy metals such as zinc and lead, chlorine, sodium, and sometimes sulphur that are elevated relative to those in virgin wood. In several cases, boilers burning waste wood have experienced increased fouling and corrosion of furnace walls, superheaters, and economizers, problems associated with chlorine, zinc, lead, and alkali metals in the deposits. The location of the deposits and the corrosion as well as the composition of the deposits vary with the fuel composition, boiler design, combustion parameters, flue gas temperature, and material temperature. Experience gained from the operation of biofuel and waste boilers shows that corrosion damage can be reduced, or even avoided, by the selection of optimum materials or for heat exchanger surfaces, by the use of fuel mixtures or additives that decrease the corrosivity of the combustion environment, by the placement of superheaters in a less corrosive environment, and by adjusting the steam parameters. Finding the right solutions for boilers burning RWW requires a thorough understanding of the whole process, including the fuel fed into the boiler, the combustion atmosphere, the corrosivity of the flue gas and the deposits, and the corrosion resistance of different boiler materials under the prevailing conditions. The objective of this work was to shed more light on the combustion environment in bubbling fluidized bed boilers burning RWW and thus increase knowledge about the corrosivity of zinc- and lead-rich deposits formed during the combustion of RWW, with the final goal of developing a corrosion prediction tool for use in the design of boilers for RWW combustion. With such a tool, it would be possible to optimize boiler design and material selection with

  14. Fertilization effects of organic waste resources and bottom wood ash: results from a pot experiment

    Directory of Open Access Journals (Sweden)

    Eva Brod

    2012-12-01

    Full Text Available We conducted a pot experiment to study the fertilization effects of four N- and P-rich organic waste resources alone and in combination with K-rich bottom wood ash at two application rates (150 kg N ha–1 + 120 kg K ha–1, 300 kg N ha-1 + 240 kg K ha–1. Plant-available N was the growth-limiting factor. 48–73% of N applied with meat and bone meal (MBM and composted fish sludge (CFS was taken up in aboveground biomass, resulting in mineral fertilizer equivalents (MFE% of 53–81% for N uptake and 61–104% for yield. MFE% of MBM and CFS decreased for increasing application rates. Two industrial composts had weak N fertilization effects and are to be considered soil conditioners rather than fertilizers. Possible P and K fertilization effects of waste resources were masked by the soil’s ability to supply plant-available P and K, but effects on plant-available P and K contents in soil suggest that the waste resources may have positive effects under more nutrient-deficient conditions.

  15. The Level of Utilization of Secondary Timber Species among Furniture Producers

    OpenAIRE

    Antwi-Boasiako, Charles; Boadu, Kwadwo Boakye

    2016-01-01

    Background and Purpose: Inadequate supply of wood raw material is one of the major obstacles for the global furniture industry’s growth. Several secondary timbers/Lesser-Utilized-Species (LUS) that could substitute the scarce traditional timbers for furniture production exist in tropical forests. However, the industry continuously faces persistent timber shortages. The extent to which manufacturers utilize LUS as alternatives is unclear, which this study sought to ascertain. Materials and ...

  16. Foreign subsidiary development of furniture industry in the context of global recession: case of Vietnam

    OpenAIRE

    Hoang, Ngoc

    2014-01-01

    Wooden furniture industry is a traditional low-technology based and labor intensive industry (Kaplinsky & Readman, 2000), which is highly recommended for global outsourcing. Besides, the raising of “China plus one” manufacturing strategy made Southeast Asian countries became new investment destinations. In case of Vietnam, the largest exporter of wood products in Southeast Asian, wooden furniture industry is highly export-oriented with a fast growing rate especially since 2008 (MARD, 2012). W...

  17. Emission of formaldehyde from furniture

    DEFF Research Database (Denmark)

    Andersen, Helle Vibeke; Klinke, Helene B.; Funch, Lis Winther

    The emission of formaldehyde from 20 pieces of furniture, representing a variety of types, was measured in climate chambers. Most tests show low emissions but certain scenarios of furnishing, including furniture with large surface areas in relation to room volume can emit formaldehyde resulting...

  18. Investigation of Miter Corner Joint Strength of Case Furniture from Particleboard

    Directory of Open Access Journals (Sweden)

    Valdas NORVYDAS

    2012-12-01

    Full Text Available Most pieces of case furniture (kitchen and bathroom furniture, cabinets, wardrobes, tables and etc. are made of 18 mm thick wood particle boards finished with various coatings. This three-layered constructional material is obtained by bonding wood particles of different fractions with synthetic resins using heating. The exploitation duration and quality of case furniture is determined by the mechanical properties of wood particle boards and the construction of joints of wood-based panels. On a frequent basis, pieces of case furniture with non-dismantable and dismantable construction are joined by using multidowel glued joints and cam connecting fittings intended for furniture, respectively. Wood-based panels can be joined with mitre joints whose mechanical properties have not undergone testing and comparison with regular joints when applying insertable wooden dowels or furniture connecting fittings. During the testing of particle board properties it was established that joining wood-based panels in this way ensures most efficient use of mechanical characteristics of the particleboard. In addition to the properties of the mitre joint, the tests also allowed determining the bending strength, tensile strength and bonding strength of the constructional material, and providing an original method for testing board properties, which can be successfully applied to the prediction of properties of the mitre joint. Tests were performed by using a universal tensile testing machine P-0.5. Joints were bonded by applying PVA dispersion. The surface of boards was veneered by using mahogany veneer and urea formaldehyde resin. It was found that mitre joints of wood particle boards can withstand loads that are higher from 2 to 4 times, in comparison to glued doweled joints or joints constructed with cam connecting fittings.DOI: http://dx.doi.org/10.5755/j01.ms.18.4.3095

  19. Towards controlling dioxins emissions from power boilers fuelled with salt-laden wood waste

    International Nuclear Information System (INIS)

    Luthe, C.; Karidio, I.; Uloth, V.

    1997-01-01

    An evaluation of the dioxins emissions from a power boiler fuelled with salt-laden wood waste has provided insights on potential control technologies. Whereas a reduction in stack particulate levels does not preclude a corresponding reduction in dioxins emissions, good combustion conditions, in combination with an efficient secondary collection device for particulate removal, were found to offer effective control (stack emissions of 0.064 to 0.086 ng TEQ/m 3 ). Regarding minimization of dioxins formation at source, a preliminary assessment of the possible beneficial effect of an attenuated chlorine:sulphur ratio was encouraging. A more accurate assessment requires additional trials, preferably longer in duration, to eliminate any possible memory effects. (author)

  20. Prediction of the working parameters of a wood waste gasifier through an equilibrium model

    Energy Technology Data Exchange (ETDEWEB)

    Altafini, Carlos R.; Baretto, Ronaldo M. [Caxias do Sul Univ., Dept. of Mechanical Engineering, Caxias do Sul, RS (Brazil); Wander, Paulo R. [Caxias do Sul Univ., Dept. of Mechanical Engineering, Caxias do Sul, RS (Brazil); Federal Univ. of Rio Grande do Sul State (UFRGS), Mechanical Engineering Postgraduation Program (PROMEC), RS (Brazil)

    2003-10-01

    This paper deals with the computational simulation of a wood waste (sawdust) gasifier using an equilibrium model based on minimization of the Gibbs free energy. The gasifier has been tested with Pinus Elliotis sawdust, an exotic specie largely cultivated in the South of Brazil. The biomass used in the tests presented a moisture of nearly 10% (wt% on wet basis), and the average composition results of the gas produced (without tar) are compared with the equilibrium models used. Sensitivity studies to verify the influence of the moisture sawdust content on the fuel gas composition and on its heating value were made. More complex models to reproduce with better accuracy the gasifier studied were elaborated. Although the equilibrium models do not represent the reactions that occur at relatively high temperatures ( {approx_equal} 800 deg C) very well, these models can be useful to show some tendencies on the working parameter variations of a gasifier. (Author)

  1. EFFECT OF EXTRACTIVES AND CARBONIZATION TEMPERATURE ON ENERGY CHARACTERISTICS OF WOOD WASTE IN AMAZON RAINFOREST

    Directory of Open Access Journals (Sweden)

    Jordão Cabral Moulin

    2017-06-01

    Full Text Available The objective of this study was to evaluate the effect of extractives soluble in hot water, besides final carbonization temperatures, on the gravimetric yield and properties of charcoal for waste of three native forest species from the Amazon region. Waste cuttings of Ipé, Grapia and Maçaranduba species, from the machine processing for joinery of a company in the State of Pará, were used. Carbonization was carried out in an adapted electric furnace with a heating rate of 1.67°C min-1 and final temperatures of 500, 600 and 700°C. The waste was carbonized fresh after extraction in hot water to remove extractives. Gravimetric yields were analyzed, as well as chemical features and high heating value. In the evaluation of the experiment, arranged in a factorial scheme with three factors (species x temperature x material with and without extraction, and Principal Component Analysis used too. The presence of extractives (soluble in hot water from wood waste had little influence on the gravimetric yield and immediate chemical composition of charcoal; however, it showed a greater high heating value and lower contents of hydrogen and nitrogen. The increase in the final carbonization temperature reduced the gravimetric yield in charcoal, the content of volatile materials and hydrogen, with a higher content of fixed carbon, carbon and high heating value. The treatments with the best energy characteristics were obtained from Ipé and Maçaranduba charcoals with extractives produced at 600°C, in addition to Ipê and Maçaranduba charcoals with and without extractives obtained at 700°C.

  2. Special Analysis: Updated Analysis of the Effect of Wood Products on Trench Disposal Limits at the E-Area Low-Level Waste Facility

    International Nuclear Information System (INIS)

    Cook, J.R.

    2001-01-01

    This Special Analysis (SA) develops revised radionuclide inventory limits for trench disposal of low-level radioactive waste in the presence of wood products in the E-Area Low-Level Waste Facility. These limits should be used to modify the Waste Acceptance Criteria (WAC) for trench disposal. Because the work on which this SA is based employed data from tests using 100 percent wood products, the 40 percent limitation on wood products for trench (i.e., slit or engineered trench) disposal is not needed in the modified WAC

  3. Avaliação da madeira de Eucalyptus camaldulensis Dehnh e Eucalyptus urophylla S.T. Blake em ensaios de usinagem, visando à produção moveleira Evaluation of the woods of Eucalyptus camaldulensis Dehnh and Eucalyptus urophylla S.T. Blake During machining tests for use by the furniture industry

    Directory of Open Access Journals (Sweden)

    Maria Odete Alves de Souza

    2009-08-01

    Full Text Available Este estudo teve como objetivo avaliar a potencialidade de uso da madeira de clones de Eucalyptus urophylla S. T. Blake, de 6 e 8 anos, e Eucalyptus camaldulensis Dehnh, de 10 anos, no que tange aos processos de usinagem, visando ao seu uso na indústria de móveis. A madeira utilizada originou-se de plantios comerciais cultivados em sistema de consórcio agrossilvipastoril, proveniente da Votorantim Metais Zinco S/A, situada no Município de Vazante, no Estado de Minas Gerais. Utilizaram-se seis árvores por clone, totalizando 18 exemplares. Foram realizados os seguintes ensaios de usinagem: corte paralelo às fibras, corte transversal às fibras, fresagem, aplainamento, furação, furação para espiga, furação para cavilha e moldura. Os resultados mostraram-se satisfatórios, com destaque para o clone de Eucalyptus urophylla com 8 anos, principalmente nos ensaios de corte paralelo e furação para espiga, apresentando grande potencial de uso da espécie para produção de móveis. A madeira dos clones testados apresentou bom desempenho na realização dos ensaios de usinagem, no que se refere à trabalhabilidade, não havendo entraves na sua utilização como fonte de matéria-prima na indústria moveleira.The objective of this research was to conduct machining tests in woods of 6 and 8-year-old Eucalyptus urophylla and of a ten-year old Eucalyptus camaldulensis and to evaluate their possible use by the furniture industry. The wood samples were obtained from six trees of each clone, planted in a consortium with cattle and grain, owned by Votorantim Metals and Zinc. The plantation is located in the neighborhood of the city of Vazante, in the State of Minas Gerais. The following essays were conducted: cut by a table saw either parallel or perpendicular to the grain; shaping; planing; drilling; routing; mortising and drilling for dowels. All the samples yielded satisfactory results, mainly the eight year old Eucalyptus urophylla, during

  4. Elemental analysis of ash residue from combustion of CCA treated wood waste before and after electrodialytic extraction

    DEFF Research Database (Denmark)

    Pedersen, Anne Juul; Ottosen, Lisbeth M.

    2006-01-01

    Element distribution in a combined fly ash and bottom ash from combustion of copper chromate arsenate (CCA) treated wood waste was investigated by scanning electron microscopy (SEM/EDX) before and after electrodialytic extraction. The untreated ash contained various particles, including pieces...... of incompletely combusted wood rich in Cr and Ca, and irregular particles rich in Si, Al and K. Cr was also found incorporated in silica-based matrix particles. As was associated with Ca in porous (char) particles, indicating that Ca-arsenates had been formed during combustion. Cu was associated with Cr...... in the incompletely combusted wood pieces and was also found in almost pure form in a surface layer of some matrix particles – indicating surface condensation of volatile Cu species. In treated ash, Ca and As were no longer found together, indicating that Ca-arsenates had been dissolved due to the electrodialytic...

  5. Wood Flour Moulding Technology: Implications for Technical ...

    African Journals Online (AJOL)

    The intent of this article is to demonstrate how wood waste called sawdust or wood flour can be transformed by plastic moulding machine into items of economic value. Wood flour is wood reduced to very fine particle form. It can be waste product from saw mills, wood working plants or produced from selected dry wood by ...

  6. Controlled composting of waste wood contaminated with PAH; Untersuchungen zur gesteuerten Rotte von mit polyzyklischen aromatischen Kohlenwasserstoffen (PAK) kontaminiertem Altholz

    Energy Technology Data Exchange (ETDEWEB)

    Ulbricht, H.

    2002-07-01

    The author investigated the potential and limits of microbial pollutant degradation in PAH-polluted waste wood by composting. The conditions in which autochthonic micro-organisms are able to decomposite the PAH contained in wood by solid phase fermentation were investigated. The focus was on phenanthrene, anthracene and pyrene, all of which are used as protective materials (disinfestants) for wood. The results were verified on contaminated waste wood, including an analytical investigations of decomposition of PAH of the EPA catalogue. Boundary conditions for achieving high rates of PAH decomposition were investigated. [German] Generelles Ziel der Arbeit war die Untersuchung der Moeglichkeiten und Grenzen des mikrobiellen Schadstoffabbaus in PAK-belastetem Altholz durch Kompostierung und die Pruefung auf Anwendbarkeit der Erkenntnisse in technischen Verfahren. In der vorliegenden Arbeit wurde untersucht, unter welchen Bedingungen die autochthonen Mikroorganismen in der Lage sind, an das Holz gebundene PAK durch Feststofffermentation abzubauen. Als Schwerpunkt wurde zunaechst der Abbau der im zum Holzschutz verwendetem Teeroel vorkommenden PAK Phenanthren, Anthracen und Pyren untersucht. Eine Verifizierung der Ergebnisse erfolgte mit real kontaminiertem Altholz, dabei wurde der Abbau der PAK der EPA-Liste analytisch verfolgt. Es sollten geeignete Randbedingungen gefunden werden, um im Festphasensystem hohe Abbauraten der PAK zu erreichen. (orig.)

  7. Coupling effect of waste automotive engine oil in the preparation of wood reinforced LDPE plastic composites for panels

    Directory of Open Access Journals (Sweden)

    Maame Adwoa Bentumah Animpong

    2017-12-01

    Full Text Available We demonstrated the formulation of wood plastic composite (WPC materials with flexural strength of 13.69 ± 0.09 MPa for applications in outdoor fencing using municipal waste precursors like low density polyethylene (LDPE plastics (54.0 wt. %, sawn wood dust with particle size between 64 and 500 μm derived from variable hardwood species (36.0 wt. % and used automotive engine oil (10 wt. %. The WPC panels were prepared by pre-compounding, extruding at a screw auger torque of 79.8 Nm and pressing through a rectangular mould of dimension 132 mm × 37 mm × 5 mm at temperature 150 °C. The efficacy of black waste oil, as a coupling agent, was demonstrated by the absence of voids and pull-outs on microscopic examination using scanning electron microscopy. No hazardous substances were exhaled during thermo-gravimetric mass spectrometry analysis. The percentage crystallinity of the LDPE in the as-prepared material determined by differential scanning calorimetry was 11.3%. Keywords: Wood plastic composites, Low density polyethylene, Wood dust, Physical, Thermal and mechanical properties

  8. The incorporation of wood waste ash as a partial cement replacement material for making structural grade concrete: An overview

    Directory of Open Access Journals (Sweden)

    Swaptik Chowdhury

    2015-06-01

    Full Text Available With increasing industrialization, the industrial byproducts (wastes are being accumulated to a large extent, leading to environmental and economic concerns related to their disposal (land filling. Wood ash is the residue produced from the incineration of wood and its products (chips, saw dust, bark for power generation or other uses. Cement is an energy extensive industrial commodity and leads to the emission of a vast amount of greenhouse gases, forcing researchers to look for an alternative, such as a sustainable building practice. This paper presents an overview of the work and studies done on the incorporation of wood ash as partial replacement of cement in concrete from the year 1991 to 2012. The aspects of wood ash such as its physical, chemical, mineralogical and elemental characteristics as well as the influence of wood ash on properties such as workability, water absorption, compressive strength, flexural rigidity test, split tensile test, bulk density, chloride permeability, freeze thaw and acid resistance of concrete have been discussed in detail.

  9. Complete knock down (CKD) house made of wood from waste biomass and plastic for disaster struck areas

    International Nuclear Information System (INIS)

    Foong, Winson

    2010-01-01

    Despite global efforts and all good intentions to save our forests and eco systems, Mother Earth has witnessed the destruction of some 160,000 square kilometers of forest cover every year from the 1960s right up to the 1990s. The insatiable appetite and unrelenting demand for this fast diminishing commodity by both Mankind and Industry have created vast demand and supply imbalances and with pressures mounting even in the new millennium with global wood consumption reaching 3.8 billion cubic metres by 2010. Thus the quest for alternate materials continues. However, to be successful as a viable alternate to the traditional wood industry, the intending material must be able to build and expand on the current properties and advantages of wood. It should ideally be designed and engineered to yield performance properties superior to that of traditional wood. Fibersit is a high performance fiber composite derived from a revolutionary green technology. The proprietary Fibersit technology involves a method of refining, blending and compounding natural fibers from cellulose waste streams to form a high strength fibre composite material in a polymer matrix. The designated waste or base raw materials used in this instance are those of waste thermoplastics and various categories of cellulose waste including wood. Fibersit has all the structural qualities of wood, handles like wood but is yet stronger and more durable than wood. It can be nailed, screwed, drilled, sawn, milled, processed and finished just like wood. This extended product performance offers unbeatable value for money and broad, flexible on site options. In modern times, many natural disasters have occurred near or in urban areas destroying vast areas of houses and buildings. The need to rebuild society is essential and needs to be carried out in a sustainable manner. This cost often goes into billions and is needed very quickly in order to provide the bare minimum to the victims. In many instances, we have seen

  10. Multilevel model of safety climate for furniture industries.

    Science.gov (United States)

    Rodrigues, Matilde A; Arezes, Pedro M; Leão, Celina P

    2015-01-01

    Furniture companies can analyze their safety status using quantitative measures. However, the data needed are not always available and the number of accidents is under-reported. Safety climate scales may be an alternative. However, there are no validated Portuguese scales that account for the specific attributes of the furniture sector. The current study aims to develop and validate an instrument that uses a multilevel structure to measure the safety climate of the Portuguese furniture industry. The Safety Climate in Wood Industries (SCWI) model was developed and applied to the safety climate analysis using three different scales: organizational, group and individual. A multilevel exploratory factor analysis was performed to analyze the factorial structure. The studied companies' safety conditions were also analyzed. Different factorial structures were found between and within levels. In general, the results show the presence of a group-level safety climate. The scores of safety climates are directly and positively related to companies' safety conditions; the organizational scale is the one that best reflects the actual safety conditions. The SCWI instrument allows for the identification of different safety climates in groups that comprise the same furniture company and it seems to reflect those groups' safety conditions. The study also demonstrates the need for a multilevel analysis of the studied instrument.

  11. Kesiapan Produsen Mebel di Jepara dalam Menghadapi Sertifikasi Ekolabel (Readiness in Jepara Furniture Manufacturers in Confront of Ecolabel Certification

    Directory of Open Access Journals (Sweden)

    Herry Purnomo

    2012-01-01

    Full Text Available Furniture is a big 4 of Indonesia’s export commodities with palm oil, textiles, and rubber outside the oil and gas.Value-added is enjoyed by tens of millions of people involved in the value chain. But, the business is experiencingsevere challenges to the issue of certification and forest products (green or certified furniture and the scarcityof wood. Certified furniture is intended for preservation of forest resources, the healthy processing of furnituremaking as well as improving the welfare of artisans. From the supply side of certified furniture, large producershave been prepared while small producers are not ready. From the demand side, domestic consumers only wantto pay less for certified furniture, while British and Norway consumers are 16% 7.5% respectively. The increasein willingness to pay is lower than the certified furniture prices increased between 6–30%., Certification can bedone by a third party accredited by the Tropical Forest Trust (TFT, Indonesian Ecolabel Institute (LEI, orForest Stewardship Council (FSC. When the increase in production costs are higher than the desire of consumersto pay, then the certified furniture becomes difficult to be realized. Need specific strategies to market certifiedfurniture. This article is a case study in Jepara furniture craftsmen who accounted for 10% of national exports.Keywords: furniture certified, certification, forests, supply, demand, Jepara

  12. EFFECTS OF EXTRACTIVES AND DENSITY ON NATURAL RESISTANCE OF WOODS TO TERMITE Nasutitermes corniger

    Directory of Open Access Journals (Sweden)

    Juarez Benigno Paes

    2015-12-01

    Full Text Available The evaluation of the natural resistance of wood to wood-destroying organisms is of fundamental importance in the choice of species to be used in buildings and furniture industry. Thus, the effects of extractives and wood density on biological resistance of Acacia mangium, Casuarina equisetifolia, Corymbia torelliana, Eucalyptus cloeziana, Tectona grandis and Caesalpinia echinata woods to the xylophagous termite Nasutitermes corniger was evaluated under laboratory conditions. Test samples, with dimensions of 2.00 x 2.54 x 0.64 cm (radial x tangential x longitudinal in four positions in pith-bark direction (internal heart, intermediate heart, outer heart and sapwood were taken. The woods were exposed to termite action for 28 days in no-choice feeding test. The samples not selected for the termite test were turned into sawdust and the extractive contents were obtained using the shavings that passed through the sieve of 40 and were retained in the sieve of 60 mesh. The wood natural resistance, within the pith-bark positions, for the studied species, is not correlated with the density and extractive content. However, among the woods, those with higher density and extractive content are more resistant. The woods with greater biological resistance to the termite Nasutitermes corniger (smaller mass loss, waste and survival time of insects are Corymbia torelliana and Caesalpinia echinata and of less resistance is Casuarina equisetifolia.

  13. Gluebond strength of laser cut wood

    Science.gov (United States)

    Charles W. McMillin; Henry A. Huber

    1985-01-01

    The degree of strength loss when gluing laser cut wood as compared to conventionally sawn wood and the amount of additional surface treatment needed to improve bond quality were assessed under normal furniture plant operating conditions. The strength of laser cut oak glued with polyvinyl acetate adhesive was reduced to 75 percent of sawn joints and gum was reduced 43...

  14. Avaliação de resíduos de painéis de madeira gerados por indústrias moveleiras para aproveitamento na confecção de pequenos objetos: estudo de caso Evaluation of residues of wood boards generated by furniture industries for their utilization in the production of small objects: study of case

    Directory of Open Access Journals (Sweden)

    Luciana Barbosa de Abreu

    2009-01-01

    Full Text Available A indústria moveleira produz uma quantidade de resíduos que, normalmente, é descartada no meio ambiente ou utilizada como combustível em caldeiras e similares, ou apenas queimada. Alternativas para utilização desses resíduos têm sido alvo de pesquisas, destacando-se a confecção de pequenos objetos, na forma de artesanato. Neste trabalho, objetivou-se avaliar os resíduos de indústrias do pólo moveleiro de Ubá/MG. No levantamento quantitativo, constatou-se que as empresas geraram resíduos dos mesmos tipos de painéis de madeira. Os resíduos mais comuns foram de aglomerado e MDF (Medium Density Fiber. Observou-se grande variabilidade das dimensões desses resíduos, principalmente em sua largura. Concluiu-se que alguns resíduos não apresentaram dimensões adequadas para a confecção de determinados objetos e que se torna necessária uma seleção prévia desses resíduos para direcioná-los a trabalhos mais minuciosos, de forma a viabilizar a sua utilização.The furniture industry generates an amount of residues, which, normally, is discarded in the environment or destined to steam production in boilers. The handmade production of small wood board objects is an outstanding alternative to take advantage of these residues. The general aim of this study was to evaluate residues in furniture industries located at the pole of Ubá/MG. Through the survey and the analysis of the data, one established that the industries generate residues from the same kind of wood board. The most common residues were of particleboard and MDF (Medium Density Fiber. One observed a great diversity of residue dimensions, mainly in width. One concluded that some residues did not present adequate dimensions for the manufacturing of some objects and that there is a necessity of previous residues selection, in order to destine them to more detailed works and make possible their use.

  15. Experiments on torrefied wood pellet: study by gasification and characterization for waste biomass to energy applications.

    Science.gov (United States)

    Rollinson, Andrew N; Williams, Orla

    2016-05-01

    Samples of torrefied wood pellet produced by low-temperature microwave pyrolysis were tested through a series of experiments relevant to present and near future waste to energy conversion technologies. Operational performance was assessed using a modern small-scale downdraft gasifier. Owing to the pellet's shape and surface hardness, excellent flow characteristics were observed. The torrefied pellet had a high energy density, and although a beneficial property, this highlighted the present inflexibility of downdraft gasifiers in respect of feedstock tolerance due to the inability to contain very high temperatures inside the reactor during operation. Analyses indicated that the torrefaction process had not significantly altered inherent kinetic properties to a great extent; however, both activation energy and pre-exponential factor were slightly higher than virgin biomass from which the pellet was derived. Thermogravimetric analysis-derived reaction kinetics (CO2 gasification), bomb calorimetry, proximate and ultimate analyses, and the Bond Work Index grindability test provided a more comprehensive characterization of the torrefied pellet's suitability as a fuel for gasification and also other combustion applications. It exhibited significant improvements in grindability energy demand and particle size control compared to other non-treated and thermally treated biomass pellets, along with a high calorific value, and excellent resistance to water.

  16. Biological conversion of the aqueous wastes from hydrothermal liquefaction of algae and pine wood by Rhodococci

    Energy Technology Data Exchange (ETDEWEB)

    He, Yucai; Li, Xiaolu; Xue, Xiaoyun; Swita, Marie S.; Schmidt, Andrew J.; Yang, Bin

    2017-01-01

    In this study, R. opacus PD630, R. jostii RHA1, R. jostii RHA1 VanA-, and their co-culture were employed to convert hydrothermal liquefaction aqueous waste (HTLAW) into lipids. After 11 days, the COD reduction of algal-HTLAW reached 93.4% and 92.7% by R. jostii RHA1 and its mutant VanA-, respectively. Woody-HTLAW promoted lipid accumulation of 0.43 g lipid/g cell dry weight in R. opacus PD630 cells. Additionally, the total number of chemicals in HTLAW decreased by over 1/3 after 7 days of coculture, and 0.10 g/L and 0.46 g/L lipids were incrementally accumulated in the cellular mass during the fermentation of wood- and algal-HTLAW, respectively. The GC-MS data supported that different metabolism pathways were followed when these Rhodococci strains degraded algae- and woody-HTLAW. These results indicated promising potential of bioconversion of under-utilized carbon and toxic compounds in HTLAW into useful products by selected Rhodococci.

  17. Spatial and temporal price variations of sawn wood utilized for ...

    African Journals Online (AJOL)

    O Y Ogunsanwo

    UTILIZED FOR FURNITURE MAKING IN SELECTED CITIES IN NIGERIA ... 193 furniture factories comprising of 154 small, 28 medium and 11 large scale were selected in ... recommended that suitable policies that will ensure market integration through proper ..... Organized by the African Network for Wood Reaserch and.

  18. Morphology, composition, and mixing state of primary particles from combustion sources - crop residue, wood, and solid waste.

    Science.gov (United States)

    Liu, Lei; Kong, Shaofei; Zhang, Yinxiao; Wang, Yuanyuan; Xu, Liang; Yan, Qin; Lingaswamy, A P; Shi, Zongbo; Lv, Senlin; Niu, Hongya; Shao, Longyi; Hu, Min; Zhang, Daizhou; Chen, Jianmin; Zhang, Xiaoye; Li, Weijun

    2017-07-11

    Morphology, composition, and mixing state of individual particles emitted from crop residue, wood, and solid waste combustion in a residential stove were analyzed using transmission electron microscopy (TEM). Our study showed that particles from crop residue and apple wood combustion were mainly organic matter (OM) in smoldering phase, whereas soot-OM internally mixed with K in flaming phase. Wild grass combustion in flaming phase released some Cl-rich-OM/soot particles and cardboard combustion released OM and S-rich particles. Interestingly, particles from hardwood (pear wood and bamboo) and softwood (cypress and pine wood) combustion were mainly soot and OM in the flaming phase, respectively. The combustion of foam boxes, rubber tires, and plastic bottles/bags in the flaming phase released large amounts of soot internally mixed with a small amount of OM, whereas the combustion of printed circuit boards and copper-core cables emitted large amounts of OM with Br-rich inclusions. In addition, the printed circuit board combustion released toxic metals containing Pb, Zn, Sn, and Sb. The results are important to document properties of primary particles from combustion sources, which can be used to trace the sources of ambient particles and to know their potential impacts in human health and radiative forcing in the air.

  19. Environmental assessment of the atlas bio-energy waste wood fluidized bed gasification power plant. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Holzman, M.I.

    1995-08-01

    The Atlas Bio-Energy Corporation is proposing to develop and operate a 3 MW power plant in Brooklyn, New York that will produce electricity by gasification of waste wood and combustion of the produced low-Btu gas in a conventional package steam boiler coupled to a steam-electric generator. The objectives of this project were to assist Atlas in addressing the environmental permit requirements for the proposed power plant and to evaluate the environmental and economic impacts of the project compared to more conventional small power plants. The project`s goal was to help promote the commercialization of biomass gasification as an environmentally acceptable and economically attractive alternative to conventional wood combustion. The specific components of this research included: (1) Development of a permitting strategy plan; (2) Characterization of New York City waste wood; (3) Characterization of fluidized bed gasifier/boiler emissions; (4) Performance of an environmental impact analysis; (5) Preparation of an economic evaluation; and (6) Discussion of operational and maintenance concerns. The project is being performed in two phases. Phase I, which is the subject of this report, involves the environmental permitting and environmental/economic assessment of the project. Pending NYSERDA participation, Phase II will include development and implementation of a demonstration program to evaluate the environmental and economic impacts of the full-scale gasification project.

  20. 76 FR 54794 - Klaussner Furniture Industries, Inc., Plant #3, Asheboro, NC; Klaussner Furniture Industries, Inc...

    Science.gov (United States)

    2011-09-02

    ...,989B] Klaussner Furniture Industries, Inc., Plant 3, Asheboro, NC; Klaussner Furniture Industries, Inc... of Klaussner Furniture Industries, Inc., Milford, IA; Amended Certification Regarding Eligibility To... Industries, Inc., Plant 3, Asheboro, North Carolina (TA-W- 70,989) and Klaussner Furniture Industries, Inc...

  1. Furniture for a Technology-Infused School.

    Science.gov (United States)

    Fickes, Michael

    1998-01-01

    Discusses how one New Mexico school district weighed the choices in selecting and purchasing computer furniture for its classrooms. The purchasing process is described, as well as the types of, and reasons for, the furniture bought. (GR)

  2. 78 FR 13626 - Wooden Bedroom Furniture From the People's Republic of China: Initiation of Administrative Review

    Science.gov (United States)

    2013-02-28

    .... Shanghai Fangjia Industry Co., Ltd.... No. Shanghai Hospitality Product Mfg., No. Co., Ltd. Shanghai... Co., Ltd., Artwork Metal & Plastic Co., Ltd., Jibson Industries Ltd., Always Loyal International.... Taicang Sunrise Wood Industry Co., Ltd., Taicang Fairmount Designs Furniture Co., Ltd., Meizhou Sunrise...

  3. 75 FR 9869 - Initiation of Administrative Review of the Antidumping Duty Order on Wooden Bedroom Furniture...

    Science.gov (United States)

    2010-03-04

    ... Plastic Co., Ltd.,* Jibson Industries, Ltd.,* Always Loyal International * Baigou Crafts Factory of... Faith Limited * Brother Furniture Manufacture Co., Ltd. * C.F. Kent Co., Inc. C.F. Kent Hospitality, Inc... Company Limited * Dongguan Chunsan Wood Products Co., Ltd.,* Trendex Industries Ltd.* [[Page 9872...

  4. Internationalisation of the Malaysian Wooden Furniture Industry

    OpenAIRE

    Zhao, LiXu

    2016-01-01

    Malaysia has a strong market share in wooden furniture and the witnessed fast growth made it a leading furniture exporter. Currently, Malaysia is the 8th largest furniture export country. As an export dominated industry, the wooden furniture industry occupies a significant position in the Malaysian economic development. Since the industry is a challenged and deteriorating in global competition, the research objective is to evaluate the present situation and find out strategies on how to impro...

  5. Modelling renewable supply chain for electricity generation with forest, fossil, and wood-waste fuels

    International Nuclear Information System (INIS)

    Palander, Teijo

    2011-01-01

    In this paper, a multiple objective model to large-scale and long-term industrial energy supply chain scheduling problems is considered. The problems include the allocation of a number of fossil, peat, and wood-waste fuel procurement chains to an energy plant during different periods. This decision environment is further complicated by sequence-dependent procurement chains for forest fuels. A dynamic linear programming model can be efficiently used for modelling energy flows in fuel procurement planning. However, due to the complex nature of the problem, the resulting model cannot be directly used to solve the combined heat and electricity production problem in a manner that is relevant to the energy industry. Therefore, this approach was used with a multiple objective programming model to better describe the combinatorial complexity of the scheduling task. The properties of this methodology are discussed and four examples of how the model works based on real-world data and optional peat fuel tax, feed-in tariff of electricity and energy efficiency constraints are presented. The energy industry as a whole is subject to policy decisions regarding renewable energy production and energy efficiency regulation. These decisions should be made on the basis of comprehensive techno-economic analysis using local energy supply chain models. -- Highlights: → The energy policy decisions are made using comprehensive techno-economic analysis. → Peat tax, feed-in tariff and energy efficiency increases renewable energy production. → The potential of peat procurement deviates from the current assumptions of managers. → The dynamic MOLP model could easily be adapted to a changing decision environment.

  6. IKEA heats and cools with urban wase water. First energy saving furniture centre in Berlin-Lichtenberg; IKEA heizt und kuehlt mit staedtischem Abwasser. Erstes Energiespar-Einrichtungshaus in Berlin-Lichtenberg

    Energy Technology Data Exchange (ETDEWEB)

    Genath, Bernd

    2010-11-15

    In May 2010, the district major of Berlin-Lichtenberg (Federal Republic of Germany), Christina Emmrich, and the future boss of the Swedish furniture furniture IKEA, Jutta Iskalla, symbolically laid the foundation for the meanwhile 46th IKEA furniture store in Germany with a unique building engineering: The urban waste water heats and cools the office rooms and salesrooms via heat pump. The furniture centre is to be opened in December 2010.

  7. 41 CFR 101-25.404 - Furniture.

    Science.gov (United States)

    2010-07-01

    ...-25.404 Furniture. Furniture (office, household and quarters, and institutional) shall not be replaced unless the estimated cost of repair or rehabilitation (based on GSA term contracts), including any... which rehabilitation of the furniture at 75 percent or less of the cost of a new item would not extend...

  8. Learning From the Furniture Scale

    DEFF Research Database (Denmark)

    Hvejsel, Marie Frier; Kirkegaard, Poul Henning

    2018-01-01

    Given its proximity to the human body, the furniture scale holds a particular potential in grasping the fundamental aesthetic potential of architecture to address its inhabitants by means of spatial ‘gestures’. Likewise, it holds a technical germ in realizing this potential given its immediate...... tangibility allowing experimentation with the ‘principles’ of architectural construction. In present paper we explore this dual tectonic potential of the furniture scale as an epistemological foundation in architectural education. In this matter, we discuss the conduct of a master-level course where we...

  9. CCA-treated wood disposed in landfills and life-cycle trade-offs with waste-to-energy and MSW landfill disposal.

    Science.gov (United States)

    Jambeck, Jenna; Weitz, Keith; Solo-Gabriele, Helena; Townsend, Timothy; Thorneloe, Susan

    2007-01-01

    Chromated copper arsenate (CCA)-treated wood is a preservative treated wood construction product that grew in use in the 1970s for both residential and industrial applications. Although some countries have banned the use of the product for some applications, others have not, and the product continues to enter the waste stream from construction, demolition and remodeling projects. CCA-treated wood as a solid waste is managed in various ways throughout the world. In the US, CCA-treated wood is disposed primarily within landfills; however some of the wood is combusted in waste-to-energy (WTE) facilities. In other countries, the predominant disposal option for wood, sometimes including CCA-treated wood, is combustion for the production of energy. This paper presents an estimate of the quantity of CCA-treated wood entering the disposal stream in the US, as well as an examination of the trade-offs between landfilling and WTE combustion of CCA-treated wood through a life-cycle assessment and decision support tool (MSW DST). Based upon production statistics, the estimated life span and the phaseout of CCA-treated wood, recent disposal projections estimate the peak US disposal rate to occur in 2008, at 9.7 million m(3). CCA-treated wood, when disposed with construction and demolition (C&D) debris and municipal solid waste (MSW), has been found to increase arsenic and chromium concentrations in leachate. For this reason, and because MSW landfills are lined, MSW landfills have been recommended as a preferred disposal option over unlined C&D debris landfills. Between landfilling and WTE for the same mass of CCA-treated wood, WTE is more expensive (nearly twice the cost), but when operated in accordance with US Environmental Protection Agency (US EPA) regulations, it produces energy and does not emit fossil carbon emissions. If the wood is managed via WTE, less landfill area is required, which could be an influential trade-off in some countries. Although metals are concentrated

  10. Emissions of toxic pollutants from co-combustion of demolition and construction wood and household waste fuel blends.

    Science.gov (United States)

    Edo, Mar; Ortuño, Núria; Persson, Per-Erik; Conesa, Juan A; Jansson, Stina

    2018-07-01

    Four different types of fuel blends containing demolition and construction wood and household waste were combusted in a small-scale experimental set-up to study the effect of fuel composition on the emissions of polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), biphenyls (PCBs), chlorobenzenes (PCBzs), chlorophenols (PCPhs) and polycyclic aromatic hydrocarbons (PAHs). Two woody materials, commercial stemwood (ST) and demolition and construction wood (DC) were selected because of the differences in their persistent organic pollutants (POPs), ash and metals content. For household waste, we used a municipal solid waste (MSW) and a refuse-derived fuel (RDF) from MSW with 5-20 wt% and up to 5 wt% food waste content respectively. No clear effect on the formation of pollutants was observed with different food waste content in the fuel blends tested. Combustion of ST-based fuels was very inefficient which led to high PAH emissions (32 ± 3.8 mg/kg fuel ). The use of DC clearly increased the total PCDD and PCDF emissions (71 ± 26 μg/kg fuel ) and had a clear effect on the formation of toxic congeners (210 ± 87 ng WHO 2005 -TEQ/kg fuel ). The high PCDD and PCDF emissions from DC-based fuels can be attributed to the presence of material contaminants such as small pieces of metals or plastics as well as timber treated with chromated copper arsenate preservatives and pentachlorophenol in the DC source. Copyright © 2018 Elsevier Ltd. All rights reserved.

  11. Formation of metal agglomerates during carbonisation of chromated copper arsenate (CCA) treated wood waste: Comparison between a lab scale and an industrial plant

    Energy Technology Data Exchange (ETDEWEB)

    Helsen, Lieve [Katholieke Universiteit Leuven, Department of Mechanical Engineering, Division of Applied Mechanics and Energy Conversion, Celestijnenlaan 300A, B-3001 Leuven (Heverlee) (Belgium)]. E-mail: lieve.helsen@mech.kuleuven.be; Hacala, Amelie [Company Thermya, 1 rue Nicolas Appert, 33140 Villenave d' Ornon (France)]. E-mail: hacala@thermya.com

    2006-10-11

    This paper compares the results obtained by scanning electron microscopy coupled to X-ray analysis (SEM-EDXA) of the solid product after carbonisation of treated wood waste in a lab scale and in an industrial installation. These setups (lab scale and industrial) are characterized by different operating conditions of the carbonisation process. Moreover, the wood waste input to the processes differs significantly. From this study, it is clear that some similarities but also some differences exist between the lab scale study and the study with the industrial Chartherm plant. In both reactors, a metal (and mineral) agglomeration process takes place, even in the case of untreated wood. The agglomerates initially present in the wood input may serve as a seed for the metal agglomeration process during 'chartherisation'. The industrial setup leads to a broader range of agglomerates' size (0.1-50 {mu}m) and composition (all possible combinations of Cu, Cr, As and wood minerals). Some agglomerates contain the three metals but the major part is a combination of wood minerals and one or two of the three preservative metals, while all agglomerates analysed in the lab scale product contain the three metals. The separate influence of wood input characteristics and process conditions cannot be derived from these experiments, but the observations suggest that the higher the CCA retention in the wood input is, the easier is the metal agglomeration process during chartherisation of CCA treated wood waste. From the analyses performed in this study it seems that copper behaves differently in the sense that it agglomerates easily, but the resulting particles are small (<1 {mu}m)

  12. Formation of metal agglomerates during carbonisation of chromated copper arsenate (CCA) treated wood waste: Comparison between a lab scale and an industrial plant

    International Nuclear Information System (INIS)

    Helsen, Lieve; Hacala, Amelie

    2006-01-01

    This paper compares the results obtained by scanning electron microscopy coupled to X-ray analysis (SEM-EDXA) of the solid product after carbonisation of treated wood waste in a lab scale and in an industrial installation. These setups (lab scale and industrial) are characterized by different operating conditions of the carbonisation process. Moreover, the wood waste input to the processes differs significantly. From this study, it is clear that some similarities but also some differences exist between the lab scale study and the study with the industrial Chartherm plant. In both reactors, a metal (and mineral) agglomeration process takes place, even in the case of untreated wood. The agglomerates initially present in the wood input may serve as a seed for the metal agglomeration process during 'chartherisation'. The industrial setup leads to a broader range of agglomerates' size (0.1-50 μm) and composition (all possible combinations of Cu, Cr, As and wood minerals). Some agglomerates contain the three metals but the major part is a combination of wood minerals and one or two of the three preservative metals, while all agglomerates analysed in the lab scale product contain the three metals. The separate influence of wood input characteristics and process conditions cannot be derived from these experiments, but the observations suggest that the higher the CCA retention in the wood input is, the easier is the metal agglomeration process during chartherisation of CCA treated wood waste. From the analyses performed in this study it seems that copper behaves differently in the sense that it agglomerates easily, but the resulting particles are small (<1 μm)

  13. Value Criteria for School Furniture

    Science.gov (United States)

    Spellman, Walter

    2012-01-01

    Making furniture decisions can involve many factors, and they vary from institution to institution. For fixtures, furnishings and equipment, comparing initial cost with the cost of ownership over a life cycle can be more challenging. It may be the functionality of the furnishings that provides the greatest return on investment. In this article,…

  14. Classroom Furniture: The Mod Squad

    Science.gov (United States)

    Raths, David

    2012-01-01

    This is the first article in a six-part series on the elements of a collaborative classroom: furniture, social media, video/web conferencing tools, collaborative software, interactive devices, and mobile devices. With most universities facing tight budgets, convincing administrators to invest in expensive new classrooms is a challenge. Many higher…

  15. Influence of way of finishing furniture segments on amount emissions VOCs

    Directory of Open Access Journals (Sweden)

    Petr Čech

    2010-01-01

    Full Text Available The study deals with the influence of way of finishing furniture segments on amount emissions VOCs (volatile organic compounds. The so-called Volatile Organic Compounds (VOC are among the largest pollution sources of both the internal and external environments.VOC is defined as emission of any organic compound or a mixture thereof, with the exception of methane, whereby the compound exerts the pressure of 0.01 kPa or more at the temperature of 20 °C (293.15 K and reaches the corresponding volatility under the specific conditions of its use and can undergo photochemical reactions with nitrogen oxides when exposed to solar radiation. The effects of VOC upon environment can be described by equation: VOC + NOx + UV radiation + heat = tropospheric ozone (O3In this work there were tested MDF (medium density fibreboard coated by resin impregnated paper was used for the furniture components’ production. Next were tested compressed wood, which was used as a second material of furniture components. These both chosen materials was covered by resin impregnated paper and than sequentially finished by regular coat of finish.An attention of this study is especially put on mentioned factors and on quantity of instant and long-term VOCs emissions emitted from furniture components.The amount of emissions from furniture components, in different phases of the preparation including the resin impregnated paper coating finish, was monitored within the time intervals of 24 hours and 720 hours starting after the time of the finish preparation.The MDF (medium density fibreboard coated by resin impregnated paper was used for the furniture components´ production.A compressed wood was used as a second material of furniture components. This alternative material was covered by resin impregnated paper and than sequentially finished by regular coat of finish.

  16. Applications of Mechatronics in Seating Furniture

    Directory of Open Access Journals (Sweden)

    Hynek Maňák

    2014-01-01

    Full Text Available Mechatronics is gradually being used in different fields of the production process and final products. In the field of home seating furniture, it has not been formally declared as such yet. The purpose of further development of seating furniture is to improve its ergonomic parameters, to improve user comfort in controlling and using seating furniture or to provide new additional functions of seating furniture. Application of mechatronic principles can be presumed within the framework of this development. An analysis of the current state of reclining seating furniture, which uses mechanical and electromechanical positioning mechanisms, is conducted in order to formulate possible fields of applying mechatronics. The analysis defines individual ergonomic parameters which are influenced in reclining of seating furniture. This analysis is used as a basis for formulating a hypothesis describing potential development fields of applying mechatronics in home seating furniture.

  17. Regulatory Promotion of Waste Wood Reused as an Energy Source and the Environmental Concerns about Ash Residue in the Industrial Sector of Taiwan

    Directory of Open Access Journals (Sweden)

    Wen-Tien Tsai

    2012-11-01

    Full Text Available The objective of this paper was to provide a preliminary analysis of the utilization of energy derived from waste wood in Taiwan, a highly industrialized country with a high dependence (over 99% on imported energy. The discussion focuses on the status of waste wood generation and its management over the past decade. Findings show that the quantities of biomass waste collected for reuse purposes in the industrial sectors of Taiwan has exhibited an increasing trend, from about 4000 tons in 2001 to over 52,000 tons in 2010. Although waste wood can be reused as a fuel and raw material for a variety of applications based on regulatory promotion, the most commonly used end use is to directly utilize it as an auxiliary fuel in industrial utilities (e.g., boilers, heaters and furnaces for the purpose of co-firing with coal/fuel oil. The most progressive measure for promoting biomass-to-power is to introduce the feed-in tariff (FIT mechanism according to the Renewable Energy Development Act passed in June 2009. The financial support for biomass power generation has been increasing over the years from 0.070 US$/kWh in 2010 to 0.094 US$/kWh in 2012. On the other hand, the environmental regulations in Taiwan regarding the hazard identification of wood-combusted ash (especially in filter fly-ash and its options for disposal and utilization are further discussed in the paper, suggesting that waste wood impregnated with chromated copper arsenate (CCA and other copper-based preservatives should be excluded from the wood-to-energy system. Finally, some recommendations for promoting wood-to-energy in the near future of Taiwan are addressed.

  18. Investigating the Effective Index on Customers Choice in Buying Furniture

    Directory of Open Access Journals (Sweden)

    Hossein Rangavar

    2014-05-01

    Full Text Available The competitive world today, with increasing customers satisfaction and expanding the definition of hosting and its direct connection with quality of products is essential. Thus not only the current customers stay fixed but also it increases. The purpose of this study was to investigate and ranking the crucial indicators that influence the choice of furniture by customers. Because of this, the studied indexes are classified in 6 group: quality, beauty, design, creating a suitable atmosphere for selling the goods, selling conditions and advertising. Population consisted of three major commercial areas in Tehran (Delawaran, Hassan Abad and Yaftabad. Statistical sample consisted a number of 100 people. A questionnaire was developed to gather data. Reliability of the questionnaires has been approved through Cronbach's Alpha coefficient (0.921. Investigation of effective indexes was done by chi-square method and in order to final ranking the indexes, friedman analyses have been used. The results obtained of ranking showed the chief factor in customers choice is under category of beauty due to this elegancy role in customers point of view. After elegancy, according to the classified elements studied in this research, raw material in making furniture, wood production’s price, ergonomy, customers satisfaction for his last purchase and immediate delivery, respectively, are the most important effective index in buying furniture by consumer.

  19. Assessment of chemical and material contamination in waste wood fuels--A case study ranging over nine years.

    Science.gov (United States)

    Edo, Mar; Björn, Erik; Persson, Per-Erik; Jansson, Stina

    2016-03-01

    The increased demand for waste wood (WW) as fuel in Swedish co-combustion facilities during the last years has increased the import of this material. Each country has different laws governing the use of chemicals and therefore the composition of the fuel will likely change when combining WW from different origins. To cope with this, enhanced knowledge is needed on WW composition and the performance of pre-treatment techniques for reduction of its contaminants. In this study, the chemical and physical characteristics of 500 WW samples collected at a co-combustion facility in Sweden between 2004 and 2013 were investigated to determine the variation of contaminant content over time. Multivariate data analysis was used for the interpretation of the data. The concentrations of all the studied contaminants varied widely between sampling occasions, demonstrating the highly variable composition of WW fuels. The efficiency of sieving as a pre-treatment measure to reduce the levels of contaminants was not sufficient, revealing that sieving should be used in combination with other pre-treatment methods. The results from this case study provide knowledge on waste wood composition that may benefit its management. This knowledge can be applied for selection of the most suitable pre-treatments to obtain high quality sustainable WW fuels. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

  20. Bio-Oil Production from Fast Pyrolysis of Corn Wastes and Eucalyptus Wood in a Fluidized Bed Reactor

    Directory of Open Access Journals (Sweden)

    M.A Ebrahimi-Nik

    2014-09-01

    Full Text Available Fast pyrolysis is an attractive technology for biomass conversion, from which bio-oil is the preferred product with a great potential for use in industry and transport. Corn wastes (cob and stover and eucalyptus wood are widely being produced throughout the world. In this study, fast pyrolysis of these two materials were examined under the temperature of 500 °C; career gas flow rate of 660 l h-1; particle size of 1-2 mm; 80 and 110 g h-1 of feed rate. The experiments were carried out in a continuous fluidized bed reactor. Pyrolysis vapor was condensed in 3 cooling traps (15, 0 and -40 °C plus an electrostatic one. Eucalyptus wood was pyrolyised to 12.4, 61.4, and 26.2 percent of bio-char, bio-oil and gas, respectively while these figures were as 20.15, 49.9, and 29.95 for corn wastes. In all experiments, the bio-oil obtained from electrostatic trap was a dark brown and highly viscose liquid.

  1. Recognized and new problems of power generation from waste wood according to the new EEG of 2004; Alte und neue Probleme der Altholzverstromung nach der EEG-Novelle 2004

    Energy Technology Data Exchange (ETDEWEB)

    Anger, C. [Avocado Rechtsanwaelte, Koeln (Germany)

    2005-10-01

    Power generation from waste wood according to the EEG (Renewables Act), even in the modified version of 2004, raises complex legal problems under EU law. The contribution discusses these problems and presents important information on the legal boundary conditions of power generation from waste wood. (orig.)

  2. Trace element partitioning in ashes from boilers firing pure wood or mixtures of solid waste with respect to fuel composition, chlorine content and temperature.

    Science.gov (United States)

    Saqib, Naeem; Bäckström, Mattias

    2014-12-01

    Trace element partitioning in solid waste (household waste, industrial waste, waste wood chips and waste mixtures) incineration residues was investigated. Samples of fly ash and bottom ash were collected from six incineration facilities across Sweden including two grate fired and four fluidized bed incinerators, to have a variation in the input fuel composition (from pure biofuel to mixture of waste) and different temperature boiler conditions. As trace element concentrations in the input waste at the same facilities have already been analyzed, the present study focuses on the concentration of trace elements in the waste fuel, their distribution in the incineration residues with respect to chlorine content of waste and combustion temperature. Results indicate that Zn, Cu and Pb are dominating trace elements in the waste fuel. Highly volatile elements mercury and cadmium are mainly found in fly ash in all cases; 2/3 of lead also end up in fly ash while Zn, As and Sb show a large variation in distribution with most of them residing in the fly ash. Lithophilic elements such as copper and chromium are mainly found in bottom ash from grate fired facilities while partition mostly into fly ash from fluidized bed incinerators, especially for plants fuelled by waste wood or ordinary wood chips. There is no specific correlation between input concentration of an element in the waste fuel and fraction partitioned to fly ash. Temperature and chlorine content have significant effects on partitioning characteristics by increasing the formation and vaporization of highly volatile metal chlorides. Zinc and cadmium concentrations in fly ash increase with the incineration temperature. Copyright © 2014 Elsevier Ltd. All rights reserved.

  3. Market opportunities for the utilization of wood waste generated by small sawmills

    International Nuclear Information System (INIS)

    1992-01-01

    Analysis of the amounts and types of wood residue from the British Columbia sawmill and logging industry shows that only ca 50% of the residue is being utilized. On a large scale, increased utilization will mainly be achieved through use for the generation of energy. For small sawmills, a more innovative approach to the problem is needed. To assist in developing the innovative markets and uses for wood residues from the small mills, a series of in-depth interviews was conducted with sawmill operators, resource agencies, and users of wood residue throughout British Columbia. The user markets include other sawmills; pulp, paper, and particleboard plants; energy applications; and agriculture. The results of the interviews are tabulated and analyzed to demonstrate the broad spectrum of wood residue uses currently available as well as those that are emerging. For many small sawmill operations in remote areas, utilization of residues is not economical. As environmental regulations become more stringent, the cost and difficulty of handling or disposing residue will increase, and utilization (even if not economical) will become a valid option compared to disposal. A number of emerging markets for wood residue are noted, many of which are in the agricultural field. Other products which can be made out of wood residues are hog fuel and fuel pellets or briquettes. Small sawmills will not have the residue volumes or funds to establish a briquette plant, but they have expressed interest in supplying residue to any such plant that can be established in their area. 16 refs., 5 figs., 3 tabs

  4. Wood : adhesives

    Science.gov (United States)

    A.H. Conner

    2001-01-01

    This chapter on wood adhesives includes: 1) Classification of wood adhesives 2) Thermosetting wood adhesives 3) Thermoplastic adhesives, 4) Wood adhesives based on natural sources 5) Nonconventional bonding of wood 6) Wood bonding.

  5. Determining the effective indices on export development of Iran’s office furniture thereby analytical hierarchy process (AHP

    Directory of Open Access Journals (Sweden)

    Hasan Alizadeh

    2014-11-01

    Full Text Available Furniture industry is one of the most important employment and wealth productive industries, and also one major category in developing countries. This study aimed on determining the effective indices on export development of office furniture throughout the analytical hierarchy process (AHP and also by group decision. For this, imports and exports of office furniture were determined through visiting the custom office of Islamic Republic of Iran. By then, after initial studies, furniture industry and relevant experts were interviewed to recognize the effective indices on export development, and specified indices were categorized on six main groups and forty-eight sub-index. After receiving the comments of experts, degree of importance of indices and sub-indices determined thereby Expert Choice software. Results showed that raw material and product has been chosen among the major indices. Among the 48 influential sub-indices also product designing, guaranty and costumer services, quality control, custom tariffs, and strategic marketing had highest value-weighted priorities in export development of office furniture, respectively. Regarding to government’s policies and decisions in wood raw materials extent, monetary and banking system and marketing infrastructures, to maintain the productivity competitiveness of Iran’s furniture industry in first step, and to achieve to the export markets in second step, full cooperation of government with furniture industry is necessary provision for participating of this industry in global markets.

  6. Impairment of nasal mucociliary clearance in woodworkers in the furniture industry

    Science.gov (United States)

    Black, A.; Evans, J. C.; Hadfield, Esme H.; Macbeth, R. G.; Morgan, A.; Walsh, M.

    1974-01-01

    Black, A., Evans, J. C., Hadfield, Esme H., Macbeth, R. G., Morgan, A., and Walsh, M. (1974).British Journal of Industrial Medicine,31, 10-17. Impairment of nasal mucociliary clearance in woodworkers in the furniture industry. Measurements of mucociliary clearance from the anterior end of the middle turbinate were made using technetium-99m-labelled particles in nine woodworkers from the furniture industry and in 12 controls, none of whom had been occupationally exposed to wood dust. Clearance rates in the controls ranged from 1·9 to 18·5 mm min-1 with a mean of 6·8. These values are in good agreement with measurements reported elsewhere for normal subjects. Only one of the woodworkers had a clearance rate which fell within the normal range and he had been occupationally exposed for the shortest period (6 years). In four woodworkers clearance was very slow (furniture industry for more than 10 years. PMID:4821406

  7. Advanced air/flue gas staging based on CFD modelling for enhanced combustion and burnout in a waste-wood fired boiler

    DEFF Research Database (Denmark)

    Rajh, Boštjan; Yin, Chungen; Samec, Niko

    2017-01-01

    The paper presents the impacts of the jet momentum, position and orientation of air and Recycled Flue Gas (RFG) streams on the performance of a grate-fired boiler burning waste wood via a comprehensive CFD-based parametric study. It is found that the air and RFG jets can be optimized to enhance m...

  8. Trace element partitioning in ashes from boilers firing pure wood or mixtures of solid waste with respect to fuel composition, chlorine content and temperature

    Energy Technology Data Exchange (ETDEWEB)

    Saqib, Naeem, E-mail: naeem.saqib@oru.se; Bäckström, Mattias, E-mail: mattias.backstrom@oru.se

    2014-12-15

    Highlights: • Different solids waste incineration is discussed in grate fired and fluidized bed boilers. • We explained waste composition, temperature and chlorine effects on metal partitioning. • Excessive chlorine content can change oxide to chloride equilibrium partitioning the trace elements in fly ash. • Volatility increases with temperature due to increase in vapor pressure of metals and compounds. • In Fluidized bed boiler, most metals find themselves in fly ash, especially for wood incineration. - Abstract: Trace element partitioning in solid waste (household waste, industrial waste, waste wood chips and waste mixtures) incineration residues was investigated. Samples of fly ash and bottom ash were collected from six incineration facilities across Sweden including two grate fired and four fluidized bed incinerators, to have a variation in the input fuel composition (from pure biofuel to mixture of waste) and different temperature boiler conditions. As trace element concentrations in the input waste at the same facilities have already been analyzed, the present study focuses on the concentration of trace elements in the waste fuel, their distribution in the incineration residues with respect to chlorine content of waste and combustion temperature. Results indicate that Zn, Cu and Pb are dominating trace elements in the waste fuel. Highly volatile elements mercury and cadmium are mainly found in fly ash in all cases; 2/3 of lead also end up in fly ash while Zn, As and Sb show a large variation in distribution with most of them residing in the fly ash. Lithophilic elements such as copper and chromium are mainly found in bottom ash from grate fired facilities while partition mostly into fly ash from fluidized bed incinerators, especially for plants fuelled by waste wood or ordinary wood chips. There is no specific correlation between input concentration of an element in the waste fuel and fraction partitioned to fly ash. Temperature and chlorine

  9. MOISTURE HUMIDITY EQUILIBRIUM OF WOOD CHIPS FROM ENERGETIC CROPS

    Directory of Open Access Journals (Sweden)

    Jan Barwicki

    2008-09-01

    Full Text Available Processes occurring during storage of wood chips for energetic or furniture industry purposes were presented. As a result of carried out investigations, dependences of temperature and relative humidity changes of surrounding air were shown. Modified Henderson equation can be utilized for computer simulation of storing and drying processes concerning wood chips for energetic and furniture industry purposes. It reflects also obtained results from experiments carried out with above mentioned material. Using computer simulation program we can examine different wood chips storing conditions to avoid overheating and loss problems.

  10. Toxic emissions during co-combustion of biomass-waste wood-lignite blends in an industrial boiler.

    Science.gov (United States)

    Samaras, P; Skodras, G; Sakellaropoulos, G P; Blumenstock, M; Schramm, K W; Kettrup, A

    2001-01-01

    The objectives of this work were to study the PCDD/F emissions during the co-combustion of waste wood/coal co-combustion in an industrial boiler and to determine the relation of the toxic emissions to the fuel properties. Co-combustion experiments were performed in a 13.8 MWthermal industrial moving grate combustor. The fuels which were examined in this study included Greek lignite, natural uncontaminated wood, power poles and medium density fibers (MDFs) which were by-products of the plant production process. Fuel blends were prepared by mixing single components in various concentrations. PCDD/F emissions were collected during experimental runs and were analyzed according to standard methods. Low PCDD/F emissions were obtained during the co-combustion tests, lower than the limit value of 0.1 ng TEQ/Nm3. The lowest values were observed during the combustion of fuel blends containing MDF, possibly due to the inhibitory action of some of the N-containing MDF ingredients, such as urea. No direct correlation was found between the PCDD/F and the copper emissions, while examination of the PCDD/F homologue patterns revealed the predominance of the lower chlorinated isomers over the higher ones.

  11. The Level of Utilization of Secondary Timber Species among Furniture Producers

    Directory of Open Access Journals (Sweden)

    Charles Antwi-Boasiako

    2016-06-01

    Full Text Available Background and Purpose: Inadequate supply of wood raw material is one of the major obstacles for the global furniture industry’s growth. Several secondary timbers/Lesser-Utilized-Species (LUS that could substitute the scarce traditional timbers for furniture production exist in tropical forests. However, the industry continuously faces persistent timber shortages. The extent to which manufacturers utilize LUS as alternatives is unclear, which this study sought to ascertain. Materials and Methods: Data were collected from 300 Timber Firms from Ghana primarily through questionnaires using the stratified random sampling technique. Results: Continuous decline and non-availability of preferred traditional timbers and competition from imported furniture were the main challenges confronting the furniture industry. Data obtained indicated that most manufacturers (85% hardly use any LUS; 44% of these mentioned lack of information on their properties and prospective uses and 32% attributed it to non-availability on the domestic timber markets. However, 22% of these producers rely on traditionally ‘well-known’ timbers (e.g. mixed red wood, Guarea cedrata and Tectona grandis owing to their strength properties, 20% due to their strength and durability and 14% because of their strength and aesthetic properties. Many LUS (with prospects for furniture-making available in great quantities in many tropical forests could substitute the over-dependent timbers. However, information on their properties and uses are hardly available to local producers, which affects their popularity among timber suppliers and manufacturers. Conclusion: To improve on the level of utilization of secondary timbers, wood workers must be supplied with comprehensive information about their properties and economic values. This will contribute to reducing pressure on the primary timbers, ensuring consistent supply of timber and keeping the sector operational.

  12. Mechanics of Wood Machining

    CERN Document Server

    Csanády, Etele

    2013-01-01

    Wood is one of the most valuable materials for mankind, and since our earliest days wood materials have been widely used. Today we have modern woodworking machine and tools; however, the raw wood materials available are continuously declining. Therefore we are forced to use this precious material more economically, reducing waste wherever possible. This new textbook on the “Mechanics of Wood Machining” combines the quantitative, mathematical analysis of the mechanisms of wood processing with practical recommendations and solutions. Bringing together materials from many sources, the book contains new theoretical and experimental approaches and offers a clear and systematic overview of the theory of wood cutting, thermal loading in wood-cutting tools, dynamic behaviour of tool and work piece, optimum choice of operational parameters and energy consumption, the wear process of the tools, and the general regularities of wood surface roughness. Diagrams are provided for the quick estimation of various process ...

  13. Online elemental analysis of process gases with ICP-OES: A case study on waste wood combustion

    International Nuclear Information System (INIS)

    Wellinger, Marco; Wochele, Joerg; Biollaz, Serge M.A.; Ludwig, Christian

    2012-01-01

    Highlights: ► Simultaneous measurements of 23 elements in process gases of a waste wood combustor. ► Mobile ICP spectrometer allows measurements of high quality at industrial plants. ► Continuous online measurements with high temporal resolution. ► Linear correlations among element concentrations in the raw flue gas were detected. ► Novel sampling and calibration methods for ICP-OES analysis of process gases. - Abstract: A mobile sampling and measurement system for the analysis of gaseous and liquid samples in the field was developed. An inductively coupled plasma optical emission spectrometer (ICP-OES), which is built into a van, was used as detector. The analytical system was calibrated with liquid and/or gaseous standards. It was shown that identical mass flows of either gaseous or liquid standards resulted in identical ICP-OES signal intensities. In a field measurement campaign trace and minor elements in the raw flue gas of a waste wood combustor were monitored. Sampling was performed with a highly transport efficient liquid quench system, which allowed to observe temporal variations in the elemental process gas composition. After a change in feedstock an immediate change of the element concentrations in the flue gas was detected. A comparison of the average element concentrations during the combustion of the two feedstocks showed a high reproducibility for matrix elements that are expected to be present in similar concentrations. On the other hand elements that showed strong differences in their concentration in the feedstock were also represented by a higher concentration in the flue gas. Following the temporal variations of different elements revealed strong correlations between a number of elements, such as chlorine with sodium, potassium and zinc, as well as arsenic with lead, and calcium with strontium.

  14. Ikea success in chinese furniture

    OpenAIRE

    Yihong, Li

    2007-01-01

    This thesis will focus on the market exploiting and development of IKEA in China, analysis the characteristics of Chinese market and the supply-demand of the IKEA products in China. It also analyze the main Chinese consumers’ behaviour and evaluating the furniture retail market in China. IKEA is a successful case to open the china market recent years. The main goal is to acquire this information in order to provide the overseas retailers with a good starting point for creating an effective bu...

  15. Optimization of inventory management in furniture manufacturing

    OpenAIRE

    Karkauskas, Justinas

    2017-01-01

    Aim of research - to present inventory management optimization guidelines for furniture manufacturing company, based on analysis of scientific literature and empirical research. Tasks of the Issue: • Disclose problems of inventory management in furniture manufacturing sector; • To analyze theoretical inventory management decisions; • To develop theoretical inventory management optimization model; • Do empirical research of inventory management and present offers for optimizatio...

  16. Domestic competitiveness in secondary wood industries

    Science.gov (United States)

    Matthew Bumgardner; Urs Buehlmann; Albert Schuler; Rich Christianson

    2004-01-01

    As imports capture a substantial portion of the domestic wood furniture market, there is much speculation and concern as to the future of this and related industries. This study sought to obtain an industry perspective of trends in domestic manufacturing and importing, and to identify factors that might enhance domestic competitiveness. A mail survey was conducted...

  17. Durability of wood-plastic composite lumber

    Science.gov (United States)

    Rebecca E. Ibach

    2010-01-01

    Wood-plastic composite (WPC) lumber has been marketed as a low-maintenance, high-durability product. Retail sales in the United States were slightly less than $1 billion in 2008. Applications include docking, railing, windows, doors, fencing, siding, moldings, landscape timbers, car interior parts, and furniture. The majority of these products are used outdoors and...

  18. Consumer Behaviour Model on the Furniture Market

    Directory of Open Access Journals (Sweden)

    BEDNÁRIK, Éva

    2010-01-01

    Full Text Available This study introduces the furniture purchasing behaviour model. The study describes thebehaviour model and characteristics of decision making and the environmental factors affecting theindividuals besides emphasising the family character of furniture purchase. We introduce a chapterfrom the primary research verifying the model that analyses the validity of customer behaviour trendsdefined as elements of the impersonal environment on the furniture market. We touch on our lifestylebased segmentation model which is elaborated in our work in detail. The method of primary researchis quantitative, personal interview. While working out our research model we applied a method thatenables multi-level cross-section and cohort analyses. Our work has verified the need for trendresearches on the furniture market so we suggest the construction and the near-future launch of a trendresearch system consisting of several modules that reveals the specific factors on the furniture marketbesides verifying the validity of general behaviour trends.

  19. Preparation of TiO2 photocatalyst with the matrix of palm wood ( Arenga pinnata ) waste in the photodegradation of batik wastewater

    International Nuclear Information System (INIS)

    Kresnadipayana, Dian; Wahyuni, Endang Tri; Santosa, Sri Juari; Mudasir

    2017-01-01

    The study aimed to the preparation of TiO 2 photocatalyst with the matrix from palm wood waste whose has lignin and cellulose content. TiO 2 photocatalyst with the matrix from the wastewater of palm wood waste (TiO 2 /pww) was used as photocatalyst in photodegradation of batik wastewater. TiO 2 solid was dissolved in ethanol and aquadest, added with the powder of wood palm waste and stirred with a magnetic stirrer for 16 hours. Then separation was carried out using buchner and filtrate and residue were obtained. The filtrate was disposed and the residue was calcined with various temperatures for 3 hours. The temperatures in this research were 100 °C (TiO 2 /pww-100); 200°C (TiO 2 /pww-200); 300°C (TiO 2 /pww-300). Analysis and characterization of TiO 2 /wwp were conducted using X-ray diffraction (XRD) and spectrophotometer Fourier Transform Infra Red (FTIR) methods. Photocalalytic TiO 2 /wwp use the batch system in a reactor with UV light 40 watts, 220 volts and length wave 360 nm the plate magnetic stirrer. Liquid waste batik adds TiO 2 /wwp with time variation. At XRD analysis showed that the preparation of TiO 2 /pww could be done on the heating TiO 2 /pww temperature of 100°C and 200°C. At the temperature of 300°C, it was indicated that the lignocelluloses in palm wood waste were burned, meaning that few lignocelluloses remained. The result of FTIR analysis showed clearly that at the temperature of 300°C, a few spectrum of lignocelluloses remained in palm wood waste, while at a temperature of 100°C and 200°C, spectra of lignocelluloses of palm wood waste remained. The result of photocatalysis test indicated that TiO 2 /pww could reduce 40%, 72%, 81% and 64% COD for TiO 2 (control), TiO 2 /pww-100, TiO 2 /pww-200 and TiO 2 /pww-300, respectively. (paper)

  20. Physical utilisation and conversion to energy of wastes arising in the wood industry; Stoffliche und energetische Abfallverwertung in der Holz- und Papierindustrie

    Energy Technology Data Exchange (ETDEWEB)

    Leithner, R. [Technische Univ. Braunschweig (Germany). Inst. fuer Waerme- und Brennstofftechnik; Marutzky, R. [Fraunhofer-Institut fuer Holzforschung, Wilhelm-Klauditz-Institut (WKI), Braunschweig (Germany)

    1998-09-01

    The present paper describes material streams in the paper and wood industry. It also points out possibilities for the physical utilisation and conversion to energy of wood waste and discusses the problems they involve. The authors give a brief overview of the of the plants used for this purpose along with illustrating examples. [Deutsch] Es werden Stoffstroeme in der Papier- und Holzindustrie aufgezeigt. Ferner werden stoffliche und energetische Verwertungsmoeglichkeiten von Holzabfaellen und Probleme dieser Verwertung beschrieben. Auch die Anlagen zu dieser Verwertung und einige Beispiele werden kurz zusammengefasst vorgestellt. (orig.)

  1. Encapsulation and re-use of wood industry waste: varnish powder

    Directory of Open Access Journals (Sweden)

    Acosta, A.

    2006-06-01

    Full Text Available The present article describes the findings of the first stageof the analysis of xiloarcilla, a material made of clayand a wood industry by-product, namely the wood andpolyurethane varnish powder pump-suctioned off woodcomponents during sanding and polishing. This powderwas added to the clay in proportions of from 1% to 5%by weight. The prime materials as well as the xiloarcillacompound were characterized, in the latter case primarilyto determine its physical-mechanical properties andchemical and environmental feasibility as a constructionmaterial.En este articulo se presentan los resultados obtenidos,en una primera etapa, del estudio del material que denominaremoscomo xiloarcilla, compuesto por arcilla y porun subproducto de las industrias de la madera, que eneste caso son los polvos del lijado y del barnizado y excedentesde estos productos utilizados en el acabado demuchos componentes de madera (PLB, estos polvos seadicionaron a la arcilla en cantidades entre el 1% y el5% del peso total del compuesto. Se realizo un estudiode caracterizacion de los materiales aislados y posteriormentedel compuesto xiloarcilla, con enfasis en el comportamientofisico-mecanico y su respuesta quimica ymedioambiental, como material de construccion.

  2. Factors influencing selection of office furniture by corporations and universities

    Science.gov (United States)

    R. Bruce Anderson

    1976-01-01

    Evaluation of the factors that influence the selection of office furniture by large corporations and universities shows that quality, appearance, and purchase price have the most important influence on the purchase decision. The intended use of the furniture and the appearance of the furniture were the key factors in the purchase of wooden furniture.

  3. Tisettanta case study: the interoperation of furniture production companies

    Science.gov (United States)

    Amarilli, Fabrizio; Spreafico, Alberto

    This chapter presents the Tisettanta case study, focusing on the definition of the possible innovations that ICT technologies can bring to the Italian wood-furniture industry. This sector is characterized by industrial clusters composed mainly of a few large companies with international brand reputations and a large base of SMEs that manufacture finished products or are specialized in the production of single components/processes (such as the Brianza cluster, where Tisettanta operates). In this particular business ecosystem, ICT technologies can bring relevant support and improvements to the supply chain process, where collaborations between enterprises are put into action through the exchange of business documents such as orders, order confirmation, bills of lading, invoices, etc. The analysis methodology adopted in the Tisettanta case study refers to the TEKNE Methodology of Change (see Chapter 2), which defines a framework for supporting firms in the adoption of the Internetworked Enterprise organizational paradigm.

  4. Waste fatty acid addition to black liquor to decrease tall oil soap solubility and increase skimming efficiency in kraft mills pulping mountain pine beetle-infested wood

    Energy Technology Data Exchange (ETDEWEB)

    Uloth, V.; Guy, E. [FPInnovations, Prince George, BC (Canada). PAPRICAN Div.; Shewchuk, D. [Cariboo Pulp and Paper, Quesnel, BC (Canada); Van Heek, R. [Aker Kvaerner, Vancouver, BC (Canada)

    2009-07-01

    This paper presented the results of tests conducted to determine if the addition of waste fatty acids from vegetable oil processing might decrease tall oil soap solubility in pine-beetle impacted wood from British Columbia (BC). The soap recovery and tall oil production at BC mills has fallen by 30 to 40 percent in recent years due to the pulping of high proportions of grey-stage beetle-impacted wood. Full-scale mill tests were conducted over a 4-day period. The study showed that the addition of tall oil fatty acids or waste fatty acids from vegetable oil processing could decrease tall oil soap solubility and increase the soup skimming efficiency in mills pulping a large percentage of grey stage beetle-infested wood. The addition of fatty acids increased tall oil soap skimming efficiency from 50.2 percent in the baseline tests to 71.8 percent based on the total soap available, and from 76.7 percent in the baseline tests to 87.5 percent based on insoluble soap only. The economic analyses indicated that waste fatty acid addition could be economical when natural gas and oil prices are high. 4 tabs., 9 figs.

  5. A wood-waste fuelled, indirectly-fired gas turbine cogeneration plant for sawmill application. Phase 1. Preliminary engineering design and financial evaluation

    Energy Technology Data Exchange (ETDEWEB)

    1986-02-01

    Most sawmills generate more than enough wood waste to be potentially self-sufficient in both dry-kiln heat and electricity requirements. It is not generally economically viable to use conventional steam/electricty cogeneration systems at the sawmill scale of operation. As a result, Canadian sawmills are still large consumers of purchased fuels and electricity. The overall objective of this project was to develop a cost-effective wood waste-fired power generation and lumber drying system for sawmill applications. The system proposed and evaluated in this project is a wood waste-fuelled, indirectly-fired gas turbine cogeneration plant. Research, design, and development of the system has been planned to take place in a number of phases. Phase 1 consists of a preliminary engineering design and financial evaluation of the system, the subjects of this report. The results indicate that the proposed indirectly-fired gas turbine cogeneration system is both technically and financially feasible under a variety of conditions. 8 figs., 8 tabs.

  6. The potential of Swedish furniture companies in Vietnam : How Vietnamese consumers perceive the product values of Swedish furniture

    OpenAIRE

    Dinh, Thi Phuong Lan; Karlsson, Jonas

    2012-01-01

    Introduction: Swedish furniture companies have been quite successful in many parts of the world recently, with IKEA being a famous example of that. Meanwhile, Vietnam has one of the fastest-growing economies in South East Asia. However, there has not been any Swedish furniture company established on the Vietnamese market so far. Therefore, it would be useful to see if the Vietnamese furniture consumers would appreciate Swedish furniture, in order to analyze whether Swedish furniture companies...

  7. Effects of oil sands waste water on the wood frog (rana sylvatica)

    Energy Technology Data Exchange (ETDEWEB)

    Hersikorn, B.; Smits, J.E. [Saskatchewan Univ., Regina, SK (Canada)

    2007-07-01

    The sustainability of various reclamation strategies can be determined by the growth and health of indigenous amphibians (Wood Frogs). This paper referred to the large quantities of tailings water that are generated by oil sand extraction activities. It presented the results of a study that was conducted in the spring and summer of 2006 and 2007 on reclaimed formation wetlands comprising tailings water. The objective was to understand the impact of these wetlands on native amphibians. Frogs were exposed to wetlands containing oil sands process affected water (OSPW) and reference water (no OSPW). Six experimental trenches were made at one site in the first year. Each trench had 3 enclosures with 50 tadpoles. In the second year, there were 13 sites, including 6 reference and 7 OSPW affected sites, which were classified as old (more than 8 yrs) or young (less than 7 yrs). Four enclosures, with 50 tadpoles each, were placed in each wetland. The study involved the evaluation of growth rate, survival, time to metamorphosis, thyroid hormone concentrations, liver EROD activity, and tissue retinol concentrations. In addition, stable isotopes were used to track carbon flow from primary production plants, through the food chain, to tadpoles and frogs which represent intermediate and higher trophic levels in reclaimed wetlands.

  8. Radiation technology in finishing process improves health, safety and environment (HSE) in the furniture manufacturing industry

    International Nuclear Information System (INIS)

    Ahmad Shakri Mat Seman

    1999-01-01

    In furniture manufacturing, processes like cross cutting, molding, planning, shaping, turning, assembling and finishing are involved. The most significant types of negative impact of these processes are such as dust emission, noise, hazardous work, health risk, emission of organic solvent, toxic chemicals emission and chemical waste. In the finishing process, a number of negative effects that will cause health, safety and environmental (HSE) performance. This article highlights the environmental problems in the furniture finishing processes and how the radiation technology can reduce these negative impacts. The drawbacks that hamper the manufacturers from adopting this technology are also discussed. The objective of the paper is to create the awareness among the industrialist and consumers on the HSE hazardous in furniture finishing and steps can be taken to improve

  9. DESAIN FURNITURE PADA LABORATORIUM PENDIDIKAN SENI RUPA

    Directory of Open Access Journals (Sweden)

    Agus Nursalim

    2016-04-01

    Full Text Available Permasalahan dalam penelitian ini adalah bagaimana membuat desain furniture yang memenuhi standard Antrophometry dan Ergonomy untuk Laboratorium Pendidikan Seni Rupa. Penelitian mengkaji tingkat kenyamanan furniture yang dipakai mahasiswa ketika sedang praktikum di studio. Penelitian dilakukan dengan tujuan untuk mengenai standard kenyamanan pembutan desain furniture yang akan digunakan mahasiswa sebagai perlengkapan praktikum pada laboratorium Pendidikan Seni. Bentuk Penelitian ini adalah penelitian diskriftif dengan metode kwalitatif. Temuan awal dalam penelitian ini adalah: dimensi ergonomics dan antropometrics mahasiswa pendidikan seni rupa memiliki nilai X(mean masih dibawah standard International (rekomendasi: Dreyfuss dalam buku “:The Measure of Man” dengan standard deviasi 1.96 dengan persentil 2.5 dan persentil 97.5 masih dalam batas normal (Data Tabel 4.7 dan Tabel 4.8: dimensi antropomotrics mahasiswa Angkatan 20122013. Centre of grafity atau moment of grafity mahasiswa ketika praktikum dengan duduk bertumpu pada pantat dan daerah kerja normal pada rentang 72.4-87.5. Sedangkan mahasiswa yang melakukan praktikum dengan berdiri bertumpu pada kaki dengan angular motion dan siku bebas bergerak (SBB pada rentang 183.92212.9 (data Tabel 4.2-Tabel 4.5:Data Ergonomi Mahasiswa Angkatan 2012-2013 sesuai dengan rekomendasi C.G. Drury dalam „Journal Apllied Ergonomics’. Vol.13, p.135. masih dalam tingkat nyaman. Hasil temuan ini kemudian digunakan sebagai pertimbangan awal dalam membuat desain Furniture pada studio Pendidikan Seni Rupa. Dengan demikian mahasiswa merasakan kenyamanan dalam melakukan praktikum di Studio Pendidikan Seni Rupa dengan menggunakan furniture yang ada. Untuk itu furniture harus didesain yang adjustable. Kenyamanan Furniture berpengaruh signifikan terhadap prestasi mahasiswa. Desain furniture yang dibuat Adjustable diantaranya etsel untuk melukis, Meja kerja studio dasar, Kursi kerja untuk melukis, meja putar pada

  10. Business plan for a Chinese furniture company

    OpenAIRE

    Wang, Haodi

    2016-01-01

    Abstract As a popular consumable, marketing costs of furniture are directly related to the benefits of manufacturing enterprise. Nowadays, most furniture manufacturing enterprises still adopt the traditional marketing strategy, which is single-directional, indirect and hierarchical strategy. It is not only difficult to meet the various and individual customers needs but also expensive for enterprises to exploit the market. Meanwhile, it prevents enterprises from following the market needs....

  11. DNA Damage among Wood Workers Assessed with the Comet Assay

    Science.gov (United States)

    Bruschweiler, Evin Danisman; Wild, Pascal; Huynh, Cong Khanh; Savova-Bianchi, Dessislava; Danuser, Brigitta; Hopf, Nancy B.

    2016-01-01

    Exposure to wood dust, a human carcinogen, is common in wood-related industries, and millions of workers are occupationally exposed to wood dust worldwide. The comet assay is a rapid, simple, and sensitive method for determining DNA damage. The objective of this study was to investigate the DNA damage associated with occupational exposure to wood dust using the comet assay (peripheral blood samples) among nonsmoking wood workers (n = 31, furniture and construction workers) and controls (n = 19). DNA damage was greater in the group exposed to composite wood products compared to the group exposed to natural woods and controls (P < 0.001). No difference in DNA damage was observed between workers exposed to natural woods and controls (P = 0.13). Duration of exposure and current dust concentrations had no effect on DNA damage. In future studies, workers’ exposures should include cumulative dust concentrations and exposures originating from the binders used in composite wood products. PMID:27398027

  12. Catalytic decomposition of tar derived from wood waste pyrolysis using Indonesian low grade iron ore as catalyst

    Energy Technology Data Exchange (ETDEWEB)

    Wicakso, Doni Rahmat [Chemical Engineering Department, Faculty of Engineering, Lambung Mangkurat University, Jalan A. Yani KM. 36 Banjarbaru, 70714, South Kalimantan (Indonesia); Chemical Engineering Department, Faculty of Engineering, Gadjah Mada University, Jalan Grafika No. 2 Bulaksumur, Yogyakarta, 55281 (Indonesia); Sutijan; Rochmadi [Chemical Engineering Department, Faculty of Engineering, Gadjah Mada University, Jalan Grafika No. 2 Bulaksumur, Yogyakarta, 55281 (Indonesia); Budiman, Arief, E-mail: abudiman@ugm.ac.id [Chemical Engineering Department, Faculty of Engineering, Gadjah Mada University, Jalan Grafika No. 2 Bulaksumur, Yogyakarta, 55281 (Indonesia); Center for Energy Studies, Gadjah Mada University, Sekip K1A, Yogyakarta, 55281 (Indonesia)

    2016-06-03

    Low grade iron ore can be used as an alternative catalyst for bio-tar decomposition. Compared to other catalysts, such as Ni, Rd, Ru, Pd and Pt, iron ore is cheaper. The objective of this research was to investigate the effect of using low grade iron ore as catalyst for tar catalytic decomposition in fixed bed reactor. Tar used in this experiment was pyrolysis product of wood waste while the catalyst was Indonesian low grade iron ore. The variables studied were temperatures between 500 – 600 °C and catalyst weight between 0 – 40 gram. The first step, tar was evaporated at 450 °C to produce tar vapor. Then, tar vapor was flowed to fixed bed reactor filled low grade iron ore. Gas and tar vapor from reactor was cooled, then the liquid and uncondensable gas were analyzed by GC/MS. The catalyst, after experiment, was weighed to calculate total carbon deposited into catalyst pores. The results showed that the tar components that were heavy and light hydrocarbon were decomposed and cracked within the iron ore pores to from gases, light hydrocarbon (bio-oil) and carbon, thus decreasing content tar in bio-oil and increasing the total gas product. In conclusion, the more low grade iron ore used as catalyst, the tar content in the liquid decrease, the H{sup 2} productivity increased and calorimetric value of bio-oil increased.

  13. Sales Application Online of Design Furniture on Mitra Karya Furniture

    Directory of Open Access Journals (Sweden)

    Maimunah

    2016-02-01

    Full Text Available The development of the business world characterized by the increasing number of established companies, both of which are engaged in industry, trade and services. The role of computers use in a company or organization is not a layman anymore but is a must. With the computerized system in the company or organization, all the processes ranging from data processing to making reports and another important documents can be neatly arranged so that can facilitate the process of data storage and retrieval. The sales processing system are running still manually. They are still using flyers to find consumers so that ineffective and inefficient. The sales program is the design research proposed of information systems. By utilizing the technology of computer and internet in order word is to try making the facility of sales better. By creating an online sales system to make the working process does not spread the time so that the sale can run well and be good service. The designs created by using Dreamweaver CS5 and using the MySQL for database so the database stored neatly. The main function of the online sales system is to assist in facilitating the resources to get the latest product sales at MitraKarsa Furniture, so that the customer can buy the latest products easily, anytime and anywhere they want to.

  14. Wood fuel and the environment

    International Nuclear Information System (INIS)

    Foster, C.A.

    1992-01-01

    The purpose of this paper is to try and demonstrate the role that the use of Wood as a Fuel can play in our environment. The term ''Wood Fuel'', for the purposes of these proceedings, refers to the use of wood obtained from the forest or the farm. It does not refer to waste wood from for example buildings. The role of wood fuel in the environment can be assessed at many different levels. In this paper three different scales of ''Environment'' and the role of wood fuel in each, will be considered. These three scales are namely the global environment, the local environment, and the National (community) environment. (Author)

  15. STUDY ABOUT A FURNITURE COMPANY THAT USES NEW TECHNOLOGIES AND COMPUTERIZED EQUIPMENT

    Directory of Open Access Journals (Sweden)

    PUSTIANU Monica

    2015-05-01

    Full Text Available In Romania, there are companies that uses new technologies and computerized equipment leading to obtaining high quality products and profit. Furniture industry has continuously developed due to high demand for diversified products for all age groups. Romanian goods shall be delivered both in the country and abroad. The tapestries furniture made in our country, classical or modern, by leather in different colours or with textile coating materials fashionable chosen is already enjoying much attention from the external and internal customers. The workforce employed in the furniture manufacturing industry is qualified, managed to shape the wood into complex and elegant products that are able to give full satisfaction to all consumers SWOT analysis is defined as a complex research of economic aspects, technical, sociological, legal and managerial aspects that characterize the activity of a company and allows the formulation of an opinion on the past and present condition of the company. SWOT analysis may be carried out both at the level of functional areas of the company: financial, commercial, production, human resources, research and development, management and at the level of firm as a whole. By this analysis was obtained a clear picture of the current state of the analysed company, helping to knowledge and understanding of the general context in which the company operates. Key words: quality, furniture, management, production, analysis, SWOT

  16. A REVIEW OF OIL PALM BIOCOMPOSITES FOR FURNITURE DESIGN AND APPLICATIONS: POTENTIAL AND CHALLENGES

    Directory of Open Access Journals (Sweden)

    Siti Suhaily,

    2012-07-01

    Full Text Available This review considers the potential and challenges of using agro-based oil palm biomasses, including the trunk, frond, empty fruit bunch, and palm press fiber biocomposites, for furniture applications. Currently, design and quality rather than price are becoming the primary concern for consumers when buying new furniture. Within this context, this paper focuses on the design of innovative, sustainable furniture from agro-based biocomposites to meet the needs of future population growth and technology. This research also discusses the need for biocomposite materials that do not depend on the growth of populations, but on the growth and development of the economy. This study focuses on globally available agro-based biocomposites, especially those from oil palm biomass: plywood, medium density fiberboard (MDF, wood plastic composite (WPC, laminated veneer lumber (LVL, oriented strand board (OSB, hardboards, and particleboard. Additional positive aspects of biocomposites are their environmentally friendly character, high quality, competitive design, and capacity to improve the value proposition of high-end products. These attributes increase the demand for agro-based biocomposite furniture on the international market.

  17. Household Hazardous Waste

    Science.gov (United States)

    ... waste collection" near your zip code in the Earth 911 database Exit for more information. Contact your ... lemon juice in one pint of mineral or vegetable oil and wipe furniture. Rug Deodorizer Liberally sprinkle ...

  18. Controversy. The wood war

    International Nuclear Information System (INIS)

    James, O.

    2010-01-01

    The author comments the conflict emerging in France between industries exploiting wood for construction and those exploiting it as a heating material for power generation. The first ones accuse the others to steal their raw material, to pull the prices up, and to destabilize the sector. This conflict takes place notably around sawmill wastes which are used either by wood panel fabricators or by wood pellets producers. Both sectors are claiming they are creating more jobs than the other. The French forest indeed offers good opportunities for both sectors, but other countries which are lacking forest surfaces, are buying wood in France. Several issues are matter of discussion: burning wood seems to go against the reduction of greenhouse gas emissions, subsidies awarded to big heater projects. The situation of the wood sector in Austria, Finland and Poland is briefly presented

  19. Predictors of monoterpene exposure in the Danish furniture industry.

    Science.gov (United States)

    Hagström, Katja; Jacobsen, Gitte; Sigsgaard, Torben; Schaumburg, Inger; Erlandsen, Mogens; Schlunssen, Vivi

    2012-04-01

    Individuals who work with pine in the furniture industry may be exposed to monoterpenes, the most abundant of which are α-pinene, β-pinene, and Δ(3)-carene. Monoterpenes are suspected to cause dermatitis and to harm the respiratory system. An understanding of the predictors of monoterpene exposure is therefore important in preventing these adverse effects. These predictors may include general characteristics of the work environment and specific work operations. We sought to assess the extent to which workers are exposed to monoterpenes and to identify possible predictors of monoterpene exposure in the pine furniture industry in Denmark. Passive measurements of the levels of selected monoterpenes (α-pinene, β-pinene, and Δ(3)-carene) were performed on 161 subjects from 17 pine furniture factories in Viborg County, Denmark; one sample was acquired from each worker. Additionally, wood dust samples were collected from 145 workers. Data on potential predictors of exposure were acquired over the course of the day on which the exposure measurements were recorded and could be assigned to one of four hierarchic ordered levels: worker, machine, department, and factory. In addition to univariate analyses, a mixed model was used to account for imbalances within the data and random variation with each of the hierarchically ordered levels. The geometric mean (GM) monoterpene content observed over the 161 measurements was 7.8 mg m(-3) [geometric standard deviation (GSD): 2.4]; the GM wood dust level over 145 measurements was 0.58 mg m(-3) (GSD: 1.49). None of the measured samples exceeded the occupational exposure limit for terpenes in Denmark (25 ppm, 150 mg m(-3)). In the univariate analyses, half of the predictors tested were found to be significant; the multivariate model indicated that only three of the potential predictors were significant. These were the recirculation of air in rooms used for the processing of wood (a factory level predictor), the presence of a

  20. Microbial detoxification of waste rubber material by wood-rotting fungi.

    Science.gov (United States)

    Bredberg, Katarina; Andersson, B Erik; Landfors, Eva; Holst, Olle

    2002-07-01

    The extensive use of rubber products, mainly tires, and the difficulties to recycle those products, has resulted in world wide environmental problems. Microbial devulcanisation is a promising way to increase the recycling of rubber materials. One obstacle is that several microorganisms tested for devulcanisation are sensitive to rubber additives. A way to overcome this might be to detoxify the rubber material with fungi prior to the devulcanisation. In this study, 15 species of white-rot and brown-rot fungi have been screened with regard to their capacity to degrade an aromatic model compound in the presence of ground waste tire rubber. The most effective fungus, Resinicium bicolor, was used for detoxification of rubber material. Increase in growth of the desulfurising bacterium Thiobacillus ferrooxidans in presence of the rubber treated with Resinicium bicolor compared to untreated rubber demonstrated that detoxification with fungi is possible.

  1. AN ASSESMENT OF CURRENT EMPLOYMENT NEEDS IN THE ROMANIAN FURNITURE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Cristinel Petrişor CONSTANTIN

    2015-12-01

    Full Text Available The paper presents the results of an exploratory survey among Romanian companies from the furniture industry. The study aimed to identify: (1 respondents’ opinions regarding the main competences that a candidate needs to prove in order to be hired; (2 attitudes regarding the competences of the graduates from the Wood Engineering Faculty, Transilvania University of Brasov; and (3 main current employment needs of Romanian furniture industry. The results indicated that the highest importance in the selection of employees is given to transversal competences such as: orientation to quality; learning capacity; and availability for self-development, team working; and involvement in meeting customers’ requirements. The interviewed representatives of the studied companies mainly need skilled workers in the furniture industry but also engineers able to manage the company’s processes, or to design certain processes and products. The results of the present study may be used by the Wood Engineering Faculty in their attempt to adapt the academic curriculum and course contents; and give their graduates a chance to acquire relevant competences which may enhance their employability.

  2. Bioremediation of treated wood with fungi

    Science.gov (United States)

    Barbara L. Illman; Vina W. Yang

    2006-01-01

    The authors have developed technologies for fungal bioremediation of waste wood treated with oilborne or metal-based preservatives. The technologies are based on specially formulated inoculum of wood-decay fungi, obtained through strain selection to obtain preservative-tolerant fungi. This waste management approach provides a product with reduced wood volume and the...

  3. Measurements of emissions during waste wood combustion to identify refurbishment needs; Maetning av emissioner vid foerbraenning av RT-flis foer att identifiera eventuella ombyggnadsaatgaerder

    Energy Technology Data Exchange (ETDEWEB)

    Lindau, Leif

    2003-01-01

    The background to this project is the new EU directive 2000/76/EG regarding incineration of waste. This directive may have an effect on emission limits for Swedish plants firing waste wood. It may lead to needs of refurbishment in e.g. the area of flue gas cleaning equipment. In order to produce a basis to evaluate the need for such upgrading, measurement of metals, HCI, SO{sub 2} , CO, TOC and dioxin have been carried out on three plants firing wood waste: a grate boiler (Handeloeverket P11), one circulating fluid bed boiler (Aaterbruket in Lomma), and a bubbling fluidised bed boiler (Johannes in Gaevle, firing 50% waste wood). The measurements have mainly been carried out after boiler, equivalent to upstream flue gas cleaning. The results are that the demands of the EU directive on most points can be managed with existing equipment if this consists of electrostatic precipitator or bag filter with good performance and flue gas condensor. Without flue gas condensor, there is a need for other measures for 1-10 and for grate boilers, SO{sub 2} as well. The requirements in the directive for TOC is weaker than the demand on CO, and correspondingly, the demand on CO is driving. The level of dioxin from the boiler (upstream filter) exceeds allowed emission, and is in the range of 0,1-2 ng TE/Nm{sup 3} tg, 6 % O{sub 2} . Existing equipment will meet the emission limit for the lower levels (0,1-0,3) , but not safely for the higher levels (1,5-2). Correspondingly, there may be a need for equipment upgrading, e.g. in the form of activated carbon injection upstream flue gas filter.

  4. Growth and yield of tomato cultivated on composted duck excreta enriched wood shavings and source-separated municipal solid waste

    Directory of Open Access Journals (Sweden)

    Vincent Zoes

    2011-02-01

    Full Text Available A greenhouse experiment was conducted to evaluate the use of growth substrates, made with duck excreta enriched wood shaving compost (DMC and the organic fraction of source-separated municipal solid waste (MSW compost, on the growth and yield of tomato (Lycopersicum esculentum Mill. cv. Campbell 1327. Substrate A consisted of 3:2 (W/W proportion of DMC and MSW composts. Substrates B and C were the same as A but contained 15% (W/W ratio of brick dust and shredded plastic, respectively. Three control substrates consisted of the commercially available peat-based substrate (Pr, an in-house sphagnum peat-based substrate (Gs, and black earth mixed with sandy loam soil (BE/S in a 1:4 (W/W ratio. Substrates (A, B, C and controls received nitrogen (N, phosphate (P and potassium (K at equivalent rates of 780 mg/pot, 625 mg/pot, and 625 mg/pot, respectively, or were used without mineral fertilizers. Compared to the controls (Pr, Gs and BE/S, tomato plants grown on A, B, and C produced a greater total number and dry mass of fruits, with no significant differences between them. On average, total plant dry-matter biomass in substrate A, B, and C was 19% lower than that produced on Pr, but 28% greater than biomass obtained for plant grown, on Gs and BE/S. Plant height, stem diameter and chlorophyll concentrations indicate that substrates A, B, and C were particularly suitable for plant growth. Although the presence of excess N in composted substrates favoured vegetative rather than reproductive growth, the continuous supply of nutrients throughout the growing cycle, as well as the high water retention capacity that resulted in a reduced watering by 50%, suggest that substrates A, B, and C were suitable growing mixes, offering environmental and agronomic advantages.

  5. Effects of combustion and operating conditions on PCDD/PCDF emissions from power boilers burning salt-laden wood waste.

    Science.gov (United States)

    Leclerc, Denys; Duo, Wen Li; Vessey, Michelle

    2006-04-01

    This paper discusses the effects of combustion conditions on PCDD/PCDF emissions from pulp and paper power boilers burning salt-laden wood waste. We found no correlation between PCDD/PCDF emissions and carbon monoxide emissions. A good correlation was, however, observed between PCDD/PCDF emissions and the concentration of stack polynuclear aromatic hydrocarbons (PAHs) in the absence of TDF addition. Thus, poor combustion conditions responsible for the formation of products of incomplete combustion (PICs), such as PAHs and PCDD/PCDF precursors, increase PCDD/PCDF emissions. PAH concentrations increased with higher boiler load and/or low oxygen concentrations at the boiler exit, probably because of lower available residence times and insufficient excess air. Our findings are consistent with the current understanding that high ash carbon content generally favours heterogeneous reactions leading to either de novo synthesis of PCDD/PCDFs or their direct formation from precursors. We also found that, in grate-fired boilers, a linear increase in the grate/lower furnace temperature produces an exponential decrease in PCDD/PCDF emissions. Although the extent of this effect appears to be mill-specific, particularly at low temperatures, the results indicate that increasing the combustion temperature may decrease PCDD/PCDF emissions. It must be noted, however, that there are other variables, such as elevated ESP and stack temperatures, a high hog salt content, the presence of large amounts of PICs and a high Cl/S ratio, which contribute to higher PCDD/PCDFs emissions. Therefore, higher combustion temperatures, by themselves, will not necessarily result in low PCDD/PCDFs emissions.

  6. Wood-related occupations, wood dust exposure, and sinonasal cancer.

    Science.gov (United States)

    Hayes, R B; Gerin, M; Raatgever, J W; de Bruyn, A

    1986-10-01

    A case-control study was conducted to examine the relations between type of woodworking and the extent of wood dust exposure to the risks for specific histologic types of sinonasal cancer. In cooperation with the major treatment centers in the Netherlands, 116 male patients newly diagnosed between 1978 and 1981 with primary malignancies of epithelial origin of this site were identified for study. Living controls were selected from the municipal registries, and deceased controls were selected from the national death registry. Interviews were completed for 91 (78%) cases and 195 (75%) controls. Job histories were coded by industry and occupation. An index of exposure was developed to classify the extent of occupational exposure to wood dust. When necessary, adjustment was made for age and usual cigarette use. The risk for nasal adenocarcinoma was elevated by industry for the wood and paper industry (odds ratio (OR) = 11.9) and by occupation for those employed in furniture and cabinet making (OR = 139.8), in factory joinery and carpentry work (OR = 16.3), and in association with high-level wood dust exposure (OR = 26.3). Other types of nasal cancer were not found to be associated with wood-related industries or occupations. A moderate excess in risk for squamous cell cancer (OR = 2.5) was associated with low-level wood dust exposure; however, no dose-response relation was evident. The association between wood dust and adenocarcinoma was strongest for those employed in wood dust-related occupations between 1930 and 1941. The risk of adenocarcinoma did not appear to decrease for at least 15 years after termination of exposure to wood dust. No cases of nasal adenocarcinoma were observed in men whose first exposure to wood dust occurred after 1941.

  7. Characterization of products obtained from pyrolysis and steam gasification of wood waste, RDF, and RPF.

    Science.gov (United States)

    Hwang, In-Hee; Kobayashi, Jun; Kawamoto, Katsuya

    2014-02-01

    Pyrolysis and steam gasification of woody biomass chip (WBC) obtained from construction and demolition wastes, refuse-derived fuel (RDF), and refuse paper and plastic fuel (RPF) were performed at various temperatures using a lab-scale instrument. The gas, liquid, and solid products were examined to determine their generation amounts, properties, and the carbon balance between raw material and products. The amount of product gas and its hydrogen concentration showed a considerable difference depending on pyrolysis and steam gasification at higher temperature. The reaction of steam and solid product, char, contributed to an increase in gas amount and hydrogen concentration. The amount of liquid products generated greatly depended on temperature rather than pyrolysis or steam gasification. The compositions of liquid product varied relying on raw materials used at 500°C but the polycyclic aromatic hydrocarbons became the major compounds at 900°C irrespective of the raw materials used. Almost fixed carbon (FC) of raw materials remained as solid products under pyrolysis condition whereas FC started to decompose at 700°C under steam gasification condition. For WBC, both char utilization by pyrolysis at low temperature (500°C) and syngas recovery by steam gasification at higher temperature (900°C) might be practical options. From the results of carbon balance of RDF and RPF, it was confirmed that the carbon conversion to liquid products conspicuously increased as the amount of plastic increased in the raw material. To recover feedstock from RPF, pyrolysis for oil recovery at low temperature (500°C) might be one of viable options. Steam gasification at 900°C could be an option but the method of tar reforming (e.g. catalyst utilization) should be considered. Copyright © 2013 Elsevier Ltd. All rights reserved.

  8. THE MARKETING SERVICES ON THE FURNITURE MARKET

    Directory of Open Access Journals (Sweden)

    Flaviu MEGHIŞAN

    2007-01-01

    Full Text Available The distribution of furniture has seen profound changes leading to accelerations of the dynamics of the competition environment, these changes being influenced, among other things, by the diversification of offer comprising new services. Today it seems essential to consider the distribution of furniture as an “industry that creates utility”. Indeed, the consumer is analyzed not only as a function of product characteristics, but as a set of utilities and advantages that distributions propose in their strategies of associated services. The services appear, in the same time, as variables which are applied by the distributor in his strategy to differentiate themselves and as utilities associated to the product, utilities which the consumer - as “problem-solver” - integrates in his decision making process. The consumer buys not just a simple product (furniture, but a global product which includes a sum of jointed attributes and utilities (proximity, product line, point of sale concept, information, warranty, etc.. This paper analyzes the services offer from the distribution of furniture as a method to solve the problems of furniture buyer. From this perspective the paper takes into consideration the various profiles of buying behavior, makes a critical analysis of the structure of services involved, defines a new structure of services based on the phases of buying behavior process.

  9. Assessment of Dust Emission and Working Conditions in the Bamboo and Wooden Furniture Industries in Malaysia

    Directory of Open Access Journals (Sweden)

    Jegatheswaran Ratnasingam

    2015-12-01

    Full Text Available A study was carried out to assess the dust emission and working conditions in the bamboo and rubberwood furniture manufacturing industries in Malaysia. The emission of wood dust arising from these industries was measured in each main work station in the mills. Meanwhile, a questionnaire-based survey was conducted among 5900 workers in 45 companies to obtain information on the occupational accidents that occurred in the mills. The data were collected, compiled, and analyzed using the SPSS package. The highest dust emission from the sanding operation resulted in respiratory ailments among workers. The occurrence of injuries particularly to the hand, wrist, fingers and forearm was due to the prevailing working conditions, safety climate and workers characteristics. The dust exposure levels and working conditions were much more severe in the bamboo furniture manufacturing industry. As a result, a review of existing of dust exposure levels in the woodworking industry is warranted.

  10. Evaluation of consumers' choice of wooden dining furniture in ...

    African Journals Online (AJOL)

    USER

    2010-05-24

    May 24, 2010 ... the Nigeria furniture industry though operating at abysmal performance has been ... placed the number of major wooden furniture industry in. *Corresponding author. ..... Demand complementarities, retail assortments and the ...

  11. [The application of two occupation health risk assessment models in a wooden furniture manufacturing industry].

    Science.gov (United States)

    Wang, A H; Leng, P B; Bian, G L; Li, X H; Mao, G C; Zhang, M B

    2016-10-20

    Objective: To explore the applicability of 2 different models of occupational health risk assessment in wooden furniture manufacturing industry. Methods: American EPA inhalation risk model and ICMM model of occupational health risk assessment were conducted to assess occupational health risk in a small wooden furniture enterprises, respectively. Results: There was poor protective measure and equipment of occupational disease in the plant. The concentration of wood dust in the air of two workshops was over occupational exposure limit (OEL) , and the C TWA was 8.9 mg/m 3 and 3.6 mg/m 3 , respectively. According to EPA model, the workers who exposed to benzene in this plant had high risk (9.7×10 -6 ~34.3×10 -6 ) of leukemia, and who exposed to formaldehyde had high risk (11.4 × 10 -6 ) of squamous cell carcinoma. There were inconsistent evaluation results using the ICMM tools of standard-based matrix and calculated risk rating. There were very high risks to be attacked by rhinocarcinoma of the workers who exposed to wood dust for the tool of calculated risk rating, while high risk for the tool of standard-based matrix. For the workers who exposed to noise, risk of noise-induced deafness was unacceptable and medium risk using two tools, respectively. Conclusion: Both EPA model and ICMM model can appropriately predict and assessthe occupational health risk in wooden furniture manufactory, ICMM due to the relatively simple operation, easy evaluation parameters, assessment of occupational - disease - inductive factors comprehensively, and more suitable for wooden furniture production enterprise.

  12. Evaluation of various fire retardants for use in wood flour--polyethylene composites

    Science.gov (United States)

    Nicole M. Stark; Robert H. White; Scott A. Mueller; Tim A. Osswald

    2010-01-01

    Wood-plastic composites represent a growing class of materials used by the residential construction industry and the furniture industry. For some applications in these industries, the fire performance of the material must be known, and in some cases improved. However, the fire performance of wood-plastic composites is not well understood, and there is little...

  13. A wood-waste fuelled indirectly-fired gas turbine cogeneration plant for sawmill application. Preliminay engineering and financial evaluation. Phase 1

    Energy Technology Data Exchange (ETDEWEB)

    1986-02-01

    The overall objective of this project is to develop a cost-effective wood waste-fired power generation and lumber drying system for Canadian sawmill applications. The system proposed and evaluated in this project is a wood waste-fuelled, indirectly-fired gas turbine cogeneration plant. Research, design and development of the system has been planned to take place in a number of phases. The first phase consists of a preliminary engineering design and financial evaluation of the system and is the subject of this report. This analysis focuses on British Columbia since it is the largest potential market for the sawmill cogeneration system. In order to provide design parameters for the cogeneration system, operational characteristics were compiled for a typical sawmill in the interior of British Columbia. A number of alternative design concepts were reviewed before arriving at the indirect-fired turbine concept selected for development in this project. The general concept involves the use of an open Brayton-cycle gas turbine as the prime mover to generate electrical power, while process heat for the dry-kiln is obtained by waste heat recovery from the turbine exhaust gas. The proposed system has many advantages over a conventional steam based cogeneration system and economic analysis indicates that the system generates very attractive financial returns over a variety of conditions. 7 refs., 8 figs., 8 tabs.

  14. Wood-waste fuelled indirectly-fired gas turbine cogeneration plant for sawmill applications. Phase 2. Site-specific preliminary engineering and financial analysis

    Energy Technology Data Exchange (ETDEWEB)

    1988-03-01

    The use of conventional steam/electricity cogeneration systems is not generally economical at the sawmill scale of operation. This paper describes an evaluation of a wood-waste fueled and, indirectly, gas fired turbine cogeneration plant aimed at developing a cost-effective wood-waste fired power generation and dry kiln heating system for sawmill applications. A preliminary engineering design and financial analysis of the system was prepared for a demonstration site in British Columbia. A number of alternative system configurations were identified and preliminary engineering designs prepared for each. In the first option , wood wastes combusted in a wet cell hot gas generator powered a 600 kW turbine, and produced 7,000 kW for the drying kilns. The second option provided the same electrical and heat output but used a down-fired suspension burner unit fuelled by clean, dried sawdust, together with an integral air heater heat exchanger. The third option represented a commercial-scale configuration with an electrical output of 1,800 kW, and sufficient heat output for the dry kilns. A financial analyis based on a computerized feasibility model was carried out on the last two options. Low electricity rates in British Columbia combined with the small scale of a demonstration project provide an inadequate rate of return at the site without substantial outside support. At a commercial scale of operation and with the higher electricity prices that exist outside of British Columbia the financial analysis indicates that the incremental investment in the electric generation portion of the system provides very attractive rates of return for the 3 options. 11 figs., 10 tabs.

  15. 75 FR 80528 - Wooden Bedroom Furniture From China

    Science.gov (United States)

    2010-12-22

    ... furniture from China would be likely to lead to continuation or recurrence of material injury to an industry... INTERNATIONAL TRADE COMMISSION [Investigation No. 731-TA-1058 (Review)] Wooden Bedroom Furniture... Publication 4203 (December 2010), entitled Wooden Bedroom Furniture from China: Investigation No. 731-TA-1058...

  16. Evaluation of consumers' choice of wooden dining furniture in ...

    African Journals Online (AJOL)

    Evaluation of consumers' choice of wooden dining furniture in Southwestern Nigeria: A market strategy for furniture manufacturers and marketers. ... The study recommended increase use of durable Lesser Used Species (LUS) of trees for producing dining furniture and location of showrooms to target high income earners.

  17. The green marketing of modern office furniture

    Institute of Scientific and Technical Information of China (English)

    林凡青

    2015-01-01

    Green marketing is referred to as the mainstream of marketing in the 21st century, it mainly discusses the enterprise how to deal with the growing consumer demand for environmentally friendly products. Green marketing is an extension of the traditional marketing and the development, in the traditional marketing concept, through the coordination of enterprises, customers, competitors to gain maximum profits, and green marketing is more than the ecological environment factors included. Furniture enterprises through to carry out green marketing strategy, sales of green furniture products, the corresponding measures to guide the sustainable consumption and satisfy the consumer, to achieve economic interests, the interests of the consumers, the environment is unified.

  18. High temperature corrosion in a biomass-fired power boiler : Reducing furnace wall corrosion in a waste wood-fired power plant with advanced steam data

    OpenAIRE

    Alipour, Yousef

    2013-01-01

    The use of waste (or recycled) wood as a fuel in heat and power stations is becoming more widespread in Sweden (and Europe), because it is CO2 neutral with a lower cost than forest fuel. However, it is a heterogeneous fuel with a high amount of chlorine, alkali and heavy metals which causes more corrosion than fossil fuels or forest fuel. A part of the boiler which is subjected to a high corrosion risk is the furnace wall (or waterwall) which is formed of tubes welded together. Waterwalls are...

  19. Radiographic testing of wood

    International Nuclear Information System (INIS)

    Osterloh, K.; Zscherpel, U.; Raedel, C.; Weidemann, G.; Meinel, D.; Goebbels, J.; Ewert, U.; Hasenstab, A.; Buecherl, T.

    2007-01-01

    Wood is an old and established consumption and construction material. It is still the most common material for constructing furniture, roofs, playgrounds and mine supports. In contrast to steel and concrete, wood warns of extreme loads by creaking. Its mechanical stability is more influenced by decay than by peripheral cracks. While external cracks are visible, internal decay by fungus growth is undetectable from outside. This may be a safety problem in supporting structures. The best analysis of the internal structure is provided by computed tomography, but this is also the most complex method, much more so than simple radiographic testing. However, the latter is made inaccurate by scattered radiation resulting from internal moisture. With the image processing options of digital radiographic techniques, the structural information can be separated effectively from noise. In contrast to X-ray and gamma radiography, neutron radiography provides information on the spatial distribution of moisture. In healthy wood, water is conducted in the sapwood while the hardwood is dry. Moisture in hardwood is caused by infestations, e.g. fungus growth. The contribution presents a comparative analysis of the available radiographic methods. (orig.)

  20. Compression and flexural properties of finger jointed mango wood sections

    OpenAIRE

    Kumar, V.S Kishan; Sharma, C.M; Gupta, Sachin

    2014-01-01

    In this paper, an attempt was made to assess the effectiveness of finger jointing in utilising mango wood sections for various end uses like furniture. The study was based on the estimation of Modulus of elasticity and Modulus of rupture under static bending and Maximum Crushing Stress and Modulus of elasticity under compression parallel to grain of finger jointed sections and comparing them with the values measured for clear wood sections from the same lot. For joining the sections, the Poly...

  1. IMPACTS OF DIFFERENT JOINT ANGLES AND ADHESIVES ON DIAGONAL TENSION PERFORMANCES OF BOX-TYPE FURNITURE

    Directory of Open Access Journals (Sweden)

    Musa Atar

    2010-02-01

    Full Text Available The goal of this study was to determine the effects of different joint angles and adhesives on diagonal tension performances of the box-type furniture made from solid wood and medium density fiberboard (MDF. After drilling joints of 75º, 78º, 81º, 84º, and 87º degrees on Oriental beech, European oak, Scotch pine, and MDF samples, a diagonal tensile test was applied on corners glued with polyvinyl acetate (PVAc and polyurethane (D-VTKA = Desmodur-Vinyl Trieketonol Acetate according to ASTM D 1037 standard. With reference to the obtained results, the highest tensile strength was obtained in European oak with PVAc glue and joint angle of 84º, while the lowest value was obtained in MDF with D-VTKA glue and joint angle of 75º. Considering the interaction of wood, adhesive, and joint angle, the highest tensile strength was obtained in European oak with joint angle of 81º and D-VTKA glue (1.089 N.mm-2, whereas the lowest tensile strength was determined in MDF with joint angle of 75º and PVAc glue (0.163 N.mm-2. Therefore, PVAc as glue and 81º as joint angle could be suggested to obtain some advantageous on the dovetail joint process for box-type furniture made from both solid wood and MDF.

  2. AESTHETICS APPRECIATION OF WOOD COLOUR AND PATTERNS BY COLORIMETRY: PART 1. COLORIMETRY THEORY FOR THE CIELAB SYSTEM

    OpenAIRE

    Janin, Gérard; Goncalez, Joaquim; Ananías, Rubén; Charrier, Bertrand; Fernandes da Silva, Gilson; Dilem, Abdelkader

    2001-01-01

    The colorimetry theory for the CIELab system today allows us to compute the chromatic coordinates of the raw timber colour along the wood - chain industry. The wood industry is nd strongly behind in such areas. Progress in the wood appearance description by means of colour and pattern characteristics would be suitable to classify the wood. It would also help to match pieces of wood in furniture and inside the houses, to study the wood colour change in wood ageing by photodecoloration or by dr...

  3. Species selection in secondary wood products: perspectives from different consumers

    Science.gov (United States)

    Scott A. Bowe; Matthew S. Bumgardner; Matthew S. Bumgardner

    2004-01-01

    This study investigated adult consumer perceptions of several wood species to determine if word-based and appearance-based evaluations differed. The research replicated a 2001 study by the authors, which used undergraduate college students as a proxy for older and more experienced adult furniture consumers. The literature is somewhat inconclusive concerning the extent...

  4. Gas flow parameters in laser cutting of wood- nozzle design

    Science.gov (United States)

    Kali Mukherjee; Tom Grendzwell; Parwaiz A.A. Khan; Charles McMillin

    1990-01-01

    The Automated Lumber Processing System (ALPS) is an ongoing team research effort to optimize the yield of parts in a furniture rough mill. The process is designed to couple aspects of computer vision, computer optimization of yield, and laser cutting. This research is focused on optimizing laser wood cutting. Laser machining of lumber has the advantage over...

  5. Synthesis and Characterization of Bio-based Nanomaterials from Jabon (Anthocephalus cadamba (Roxb. Miq Wood Bark: an Organic Waste Material from Community Forest

    Directory of Open Access Journals (Sweden)

    Sutrisno

    2015-06-01

    Full Text Available The application of nanotechnology to produce nanomaterials from renewable bio-based materials, like wood bark, has great potential to benefit the wood processing industry. To support this issue, we investigated the production of bio-based nanomaterials using conventional balls milling. Jabon (Anthocephalus cadamba(Roxb. Miq wood bark (JWB, an organic waste material from a community forest was subjected to conventional balls milling for 96 h and was converted into bio-based nanomaterial. The morphology and particle size, chemical components, functional groups and crystallinity of the bio-based nanomaterial were evaluated using scanning electron microscopy (SEM, scanning electron microscopy extended with energy dispersive X-ray spectroscopy (SEM-EDS, Fourier transform infrared spectroscopy (FTIR, and X-ray diffraction (XRD. The particle-sizes obtained for the JWB bio-based nanomaterial were between 43 nm to 469 nm and the functional groups were detected as cellulose. The chemical components found were carbon, oxygen, chloride, potassium and calcium, except for the sample produced from sieve type T14, which did not contain chloride. The crystalline structure was calcium oxalate hydrate (C2CaO4.H2O with crystalline sizes 21 nm and 15 nm, produced from sieve types T14 and T200 respectively.

  6. Aspects of the furniture industry in Ireland

    OpenAIRE

    Heanue, Kevin

    2009-01-01

    This dissertation examines aspects of networking, industrial organisation, innovation, and industrial agglomeration in the Irish furniture manufacturing industry. With its focus on firm behaviour, industrial organisation and industrial structure the research is located within the tradition of industrial economics. Based on heterodox economic perspectives and utilising a variety of methods (albeit principally case study based), the dissertation provides new theoretical and empirical knowle...

  7. Furniture Rack Corrosion Coupon Surveillance - 2012 Update

    International Nuclear Information System (INIS)

    Mickalonis, J. I.; Murphy, T. R.; Berry, C. J.

    2012-01-01

    Under the L Basin corrosion surveillance program furniture rack coupons immersed for 14 years (FY2009 coupons) and 16 years (FY2011 coupons) were analyzed and the results trended with coupons exposed for shorter times. In addition, a section harvested from an actual furniture rack that was immersed for 14 years was analyzed for pitting in the weld and heat-affected-zone (HAZ) regions. The L Basin operations maintained very good water quality over the entire immersion period for these samples. These results for FY2009 and FY2011 coupons showed that the average pit depths for the 6061 and 6063 base metal are 1 and 2 mils, respectively, while those for the weld and HAZ are 3 and 4 mils, respectively. The results for the weld and HAZ regions are similar to coupons removed during the period of FY2003 to FY2007. These similarities indicate that the pit development occurred quickly followed by slow kinetics of increase in pit depth. For the actual furniture rack sample average pits of 5 and 2 mils were measured for the HAZ and weld, respectively. These results demonstrate that pitting corrosion of the aluminum furniture racks used to support the spent fuel occurs in waters of good quality. The corrosion kinetics or pit depth growth rate is much less that 1 mil/year, and would not impact long-term use of this material system for fuel storage racks in L Basin if good water quality is maintained

  8. Evaluation of the use of waste of soybeans (Glycine max (L.)) combined with wood waste in making briquet; Avaliacao da utilizacao de residuo de soja (Glycine max (L.)) combinado com residuo de madeira de confeccao de briquetes

    Energy Technology Data Exchange (ETDEWEB)

    Travessini, Rosana; Schutz, Fabiana Costa de Araujo; Anami, Marcelo Hidemassa; Scherpinski, Neusa Idick [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil)], Emails: rosana_travessini@yahoo.com.br, fabianaschutz@gmail.com, mhanami@gmail.com, neusascherpinski@gmail.com

    2010-07-01

    The agricultural industry produces a large amount of which use biomass is an alternative energy economically viable through the compression portion of ligno-cellulose as raw material to replace the wood with an equivalent product, by briquetting. This study aimed to evaluate the technical feasibility of manufacturing fuel briquettes made from soybean residues combined with waste wood. The making of briquettes was performed in the laboratory of Electromechanics of UTFPR campus Medianeira PR. For this analysis, we assessed the content of moisture, ash, fixed carbon content of porosity and higher calorific value. From the results we can conclude that the manufacture of briquettes from lignocellulosic raw materials is an extremely viable energy flashlight for the region of the Bacia do Rio Parana III. (author)

  9. Occupational injuries in the Finnish furniture industry.

    Science.gov (United States)

    Aaltonen, M V

    1996-06-01

    The purpose of the study was to determine the types of occupational injuries that occur in the Finnish furniture industry and to see whether they differ as regards production type and company size. During a one-year registration period accident events, the actual and potential severity of the injuries, the causes of the accidents, and the measures needed to prevent such accidents were examined in 18 Finnish furniture factories of different types. An analysis of covariance determined the variables affecting the actual and potential severity of the injuries. The 214 accidents registered were lost-time injuries; two of them resulted in slight partial loss of fingertips. The disabling injury rate was 14.4 per 100 workers per year. Wooden furniture production and kitchen cupboard production in large companies had the highest rate. Accidents involving machines comprised half of the material. Saws were the most common machine type. Forty-two percent of the injuries could have been more severe; one injury could have been fatal. The injured persons and their foremen identified the causal factors of the accidents and the needed safety countermeasures well. Sixty-six percent of the causes and 65% of the safety countermeasures were associated with the actions of the workers and the workplace procedures. Nevertheless, only 6% of the identified safety countermeasures were put into force. It was estimated that, in 1987, 2000 on-site accidents leading to at least first-aid at some health care center occurred in the Finnish furniture industry. Special efforts should be taken to improve safety in furniture production in Finland.

  10. Impact of Imported Chinese Furniture on The Local Furniture Sector in Arusha City, Tanzania: Focusing on the Strategies of Furniture-Makers for Using Indigenous Timber Species

    OpenAIRE

    OGAWA, Sayaka

    2018-01-01

    The aim of this paper is to elucidate the strategies used by Tanzanian furnituremakers to deal with price competition from Chinese imported furniture by examining the changes in the local use of timber, which is becoming scarce due to destructive harvesting. Chinese furniture flowing into Tanzania is not only of a fashionable design but it is also cheap because it is constructed from low-quality timber and alternative materials. Small-scale Tanzanian furniture-makers operate their business ba...

  11. Development of METHANE de-NOX Reburn Process for Wood Waste and Biomass Fired Stoker Boilers - Final Report - METHANE de-NOX Reburn Technology Manual

    Energy Technology Data Exchange (ETDEWEB)

    J. Rabovitser; B. Bryan; S. Wohadlo; S. Nester; J. Vaught; M. Tartan (Gas Technology Institute); R. Glickert (ESA Environmental Solutions)

    2007-12-31

    The overall objective of this project was to demonstrate the effectiveness of the METHANE de-NOX® (MdN) Reburn process in the Forest Products Industry (FPI) to provide more efficient use of wood and sludge waste (biosolids) combustion for both energy generation and emissions reduction (specifically from nitrogen oxides (NOx)) and to promote the transfer of the technology to the wide range of wood waste-fired stoker boilers populating the FPI. This document, MdN Reburn Commercial Technology Manual, was prepared to be a resource to promote technology transfer and commercialization activities of MdN in the industry and to assist potential users understand its application and installation requirements. The Manual includes a compilation of MdN commercial design data from four different stoker boiler designs that were baseline tested as part of the development effort. Design information in the Manual include boiler CFD model studies, process design protocols, engineering data sheets and commercial installation drawings. Each design package is unique and implemented in a manner to meet specific mill requirements.

  12. Wood burning

    Energy Technology Data Exchange (ETDEWEB)

    Winkelmann, H

    1955-01-01

    Discussed are the use of wood as a fuel, the technique of wood combustion and the operation of wood-burning stoves for cooking and heating. In addition, there is a section which reviews the use of wood stoves in various countries and lists manufacturers of stoves, central heating furnaces and in some cases sawdust burners.

  13. SUSTAINABLE MANAGEMENT OF CAMEROON FORESTS RESOURCES: PROVIDING TIMBER WASTE TO THE POOR POPULATIONS AS ALTERNATIVE SOURCE OF ENERGY

    Directory of Open Access Journals (Sweden)

    Serge Benjamin Noumo Foko

    2014-01-01

    Full Text Available Cameroon is covered by about 20 million hectares of forests. Timber exploitation is the second source of external income after petroleum. Besides, Cameroon’s forest has several other functions. Yet the threat to the very existence and survival of this forest is rapidly increasing due to overexploitation by logging companies and for firewood. Despite its usefulness, a substantial volume of the wood felled by timber exploiters is abandoned as waste to rot. This waste can be used as firewood by households even for building and making of furniture by small-scale users like carpenters if they had access to it. This paper encourages the use of timber waste as an alternative to kerosene, which has become very expensive and unaffordable due to the general rise in the price of petroleum products in recent years. The overexploitation of forests can therefore be limited by putting the waste timber into use. It will go along to reduce freshly cut wood which is usually cut illegally and uncontrollably and which is a major source of depletion of forest resources. This project, once achieved will forever last because it will always generate revenue to the groups involve in the collection and the distribution of forest waste which will make money from sales even if they were to sell cheaper since the major cost is transportation and the waste wood is also cheap to obtain from the logging companies or even costless since they have less interest in it.

  14. Evaluation of the Impact of Furniture on Communications Performance for Ubiquitous Deployment of Wireless Sensor Networks in Smart Homes

    Science.gov (United States)

    Bleda, Andrés L.; Jara, Antonio J.; Maestre, Rafael; Santa, Guadalupe; Gómez Skarmeta, Antonio F.

    2012-01-01

    The extensions of the environment with the integration of sensing systems in any space, in conjunction with ubiquitous computing are enabling the so-called Smart Space Sensor Networks. This new generation of networks are offering full connectivity with any object, through the Internet of Things (IoT) and/or the Web, i.e., the Web of Things. These connectivity capabilities are making it feasible to sense the behaviours of people at home and act accordingly. These sensing systems must be integrated within typical elements found at home such as furniture. For that reason, this work considers furniture as an interesting element for the transparent location of sensors. Furniture is a ubiquitous object, i.e., it can be found everywhere at home or the office, and it can integrate and hide the sensors of a network. This work addresses the lack of an exhaustive study of the effect of furniture on signal losses. In addition an easy-to-use tool for estimating the robustness of the communication channel among the sensor nodes and gateways is proposed. Specifically, the losses in a sensor network signal due to the materials found within the communication link are evaluated. Then, this work proposes a software tool that gathers the obtained results and is capable of evaluating the impact of a given set of materials on the communications. This tool also provides a mechanism to optimize the sensor network deployments during the definition of smart spaces. Specifically, it provides information such as: maximum distances between sensor nodes, most suitable type of furniture to integrate sensors, or battery life of sensor nodes. This tool has been validated empirically in the lab, and it is currently being used by several enterprise partners of the Technological Centre of Furniture and Wood in the southeast of Spain. PMID:22778653

  15. Evaluation of the impact of furniture on communications performance for ubiquitous deployment of Wireless Sensor Networks in smart homes.

    Science.gov (United States)

    Bleda, Andrés L; Jara, Antonio J; Maestre, Rafael; Santa, Guadalupe; Gómez Skarmeta, Antonio F

    2012-01-01

    The extensions of the environment with the integration of sensing systems in any space, in conjunction with ubiquitous computing are enabling the so-called Smart Space Sensor Networks. This new generation of networks are offering full connectivity with any object, through the Internet of Things (IoT) and/or the Web, i.e., the Web of Things. These connectivity capabilities are making it feasible to sense the behaviours of people at home and act accordingly. These sensing systems must be integrated within typical elements found at home such as furniture. For that reason, this work considers furniture as an interesting element for the transparent location of sensors. Furniture is a ubiquitous object, i.e., it can be found everywhere at home or the office, and it can integrate and hide the sensors of a network. This work addresses the lack of an exhaustive study of the effect of furniture on signal losses. In addition an easy-to-use tool for estimating the robustness of the communication channel among the sensor nodes and gateways is proposed. Specifically, the losses in a sensor network signal due to the materials found within the communication link are evaluated. Then, this work proposes a software tool that gathers the obtained results and is capable of evaluating the impact of a given set of materials on the communications. This tool also provides a mechanism to optimize the sensor network deployments during the definition of smart spaces. Specifically, it provides information such as: maximum distances between sensor nodes, most suitable type of furniture to integrate sensors, or battery life of sensor nodes. This tool has been validated empirically in the lab, and it is currently being used by several enterprise partners of the Technological Centre of Furniture and Wood in the southeast of Spain.

  16. Evaluation of the Impact of Furniture on Communications Performance for Ubiquitous Deployment of Wireless Sensor Networks in Smart Homes

    Directory of Open Access Journals (Sweden)

    Antonio F. Gómez Skarmeta

    2012-05-01

    Full Text Available The extensions of the environment with the integration of sensing systems in any space, in conjunction with ubiquitous computing are enabling the so-called Smart Space Sensor Networks. This new generation of networks are offering full connectivity with any object, through the Internet of Things (IoT and/or the Web, i.e., the Web of Things. These connectivity capabilities are making it feasible to sense the behaviours of people at home and act accordingly. These sensing systems must be integrated within typical elements found at home such as furniture. For that reason, this work considers furniture as an interesting element for the transparent location of sensors. Furniture is a ubiquitous object, i.e., it can be found everywhere at home or the office, and it can integrate and hide the sensors of a network. This work addresses the lack of an exhaustive study of the effect of furniture on signal losses. In addition an easy-to-use tool for estimating the robustness of the communication channel among the sensor nodes and gateways is proposed. Specifically, the losses in a sensor network signal due to the materials found within the communication link are evaluated. Then, this work proposes a software tool that gathers the obtained results and is capable of evaluating the impact of a given set of materials on the communications. This tool also provides a mechanism to optimize the sensor network deployments during the definition of smart spaces. Specifically, it provides information such as: maximum distances between sensor nodes, most suitable type of furniture to integrate sensors, or battery life of sensor nodes. This tool has been validated empirically in the lab, and it is currently being used by several enterprise partners of the Technological Centre of Furniture and Wood in the southeast of Spain.

  17. Effectiveness of policy instruments for supporting the use of waste wood as a renewable energy resource in the Czech Republic

    International Nuclear Information System (INIS)

    Jehlickova, Bohumira; Morris, Richard

    2007-01-01

    This paper focuses on an examination of the government's strategy for encouraging the use of wood as a renewable fuel in Czech households. It examines the development of modern combustion technology and its impact on the environment. It describes the estimated requirement for wood by an average household and examines the overall availability of wood as a renewable fuel in the Czech Republic. The paper analyses in detail the policy instruments used by the Czech government to promote the use of this technology. It evaluates the impact of this policy on the users of the technology and practical achievements of the policy measures with respect to the overall objective that is the promotion of generation of renewable energy

  18. PHYSICAL ANALYSIS OF QUALITY WOOD Melia azedarach

    Directory of Open Access Journals (Sweden)

    T. J. da Silva

    2016-07-01

    Full Text Available Forest species, in general, present a slow growth, which results and profits can manifest themselves in the long run, it becomes necessary the study and discovery of new species that may provide raw materials and return on invested capital more immediate, being that the Melia azedarach wood is a potential option. In the absence of information about, the objective of this paper is to determine its physical properties: basic density and shrinkage of the Melia azedarach species in the Itapeva-SP region. The data obtained in this study allow to classify wood Melia azedarach as wood of average density and good dimensional stability. Feature that makes it ideal for its use in furniture industry. The low amount of research related to quality of this wood prevents the commercial use of it to achieve its full potential harnessing its effectively, and essential investments in this field.

  19. Minimizing waste (off-cuts using cutting stock model: The case of one dimensional cutting stock problem in wood working industry

    Directory of Open Access Journals (Sweden)

    Gbemileke A. Ogunranti

    2016-09-01

    Full Text Available Purpose: The main objective of this study is to develop a model for solving the one dimensional cutting stock problem in the wood working industry, and develop a program for its implementation. Design/methodology/approach: This study adopts the pattern oriented approach in the formulation of the cutting stock model. A pattern generation algorithm was developed and coded using Visual basic.NET language. The cutting stock model developed is a Linear Programming (LP Model constrained by numerous feasible patterns. A LP solver was integrated with the pattern generation algorithm program to develop a one - dimensional cutting stock model application named GB Cutting Stock Program. Findings and Originality/value: Applying the model to a real life optimization problem significantly reduces material waste (off-cuts and minimizes the total stock used. The result yielded about 30.7% cost savings for company-I when the total stock materials used is compared with the former cutting plan. Also, to evaluate the efficiency of the application, Case I problem was solved using two top commercial 1D-cutting stock software.  The results show that the GB program performs better when related results were compared. Research limitations/implications: This study round up the linear programming solution for the number of pattern to cut. Practical implications: From Managerial perspective, implementing optimized cutting plans increases productivity by eliminating calculating errors and drastically reducing operator mistakes. Also, financial benefits that can annually amount to millions in cost savings can be achieved through significant material waste reduction. Originality/value: This paper developed a linear programming one dimensional cutting stock model based on a pattern generation algorithm to minimize waste in the wood working industry. To implement the model, the algorithm was coded using VisualBasic.net and linear programming solver called lpsolvedll (dynamic

  20. A comparative study on Cu, Cr and As removal from CCA-treated wood waste by dialytic and electrodialytic processes

    DEFF Research Database (Denmark)

    Velizarova, Emiliya; Ribeiro, Alexandra B.; Ottosen, Lisbeth M.

    2002-01-01

    with the performance of a pure dialytic experiment (without an external power supply) in order to reveal transport of charged particles induced solely by internal electrochemical potential differences in the system. Oxalic acid proved to be a more suitable pre-treatment solution than deionised water for wood chips...

  1. Lumber attributes, characteristics, and species preferences as indicated by secondary wood products firms in the continental United States.

    Science.gov (United States)

    David L. Nicholls; Joseph. Roos

    2006-01-01

    The purpose of this research was to evaluate selected lumber attributes, species preferences, and lumber use properties among secondary wood manufacturers in the United States. Our sample included producers of kitchen cabinets, furniture, doors, windows, and molded products who attended regional and national wood manufacturing events. More than 51% of respondents had...

  2. Knot detection in X-ray images of wood planks using dictionary learning

    DEFF Research Database (Denmark)

    Hansson, Nils Mattias; Enescu, Alexandru; Brandt, Sami Sebastian

    2015-01-01

    This paper considers a novel application of x-ray imaging of planks, for the purpose of detecting knots in high quality furniture wood. X-ray imaging allows the detection of knots invisible from the surface to conventional cameras. Our approach is based on texture analysis, or more specifically, ......, discriminative dictionary learning. Experiments show that the knot detection and segmentation can be accurately performed by our approach. This is a promising result and can be directly applied in industrial processing of furniture wood.......This paper considers a novel application of x-ray imaging of planks, for the purpose of detecting knots in high quality furniture wood. X-ray imaging allows the detection of knots invisible from the surface to conventional cameras. Our approach is based on texture analysis, or more specifically...

  3. Wood Flour Moulding Technology: Implications for Technical ...

    African Journals Online (AJOL)

    User

    2011-04-19

    Apr 19, 2011 ... be waste product from saw mills, wood working plants or produced from selected dry wood by .... Stop watch-used to indicate the exact time the mould has remained in the press before wood .... There is abundance of saw dust the source of which is the ... Madison, Wisconsin: Wiley Interscience. Usoro, H. S. ...

  4. A producer survey on Turkish furniture industry

    OpenAIRE

    Öğün, Emir Polat

    1996-01-01

    Ankara : The Department of Management and Graduate School of Business Administration of Bilkent Univ., 1996. Thesis (Master's) -- Bilkent University, 1996. Includes bibliographical references leaves 79-80. Turkish furniture industry has been growing steadily since the liberalization of Turkish economy in early 1980’s. However, the industry faces some technological and economical problems which affects the competitiveness of the firms in the global market. The major problems ...

  5. Realization of FRC interior and exterior furniture

    Science.gov (United States)

    Šonka, Š.; Frantová, M.; Štemberk, P.; Havrda, J.; Janouch, P.

    2017-09-01

    This article deals with the implementation of fibre reinforced concrete for interior and exterior furniture. The use of fibre reinforced concrete for non-traditional and small structures brings some specifics in design and realization. These are, in particular, the design of a suitable mixture, the choice of the shape of the structure in relation to the technological possibilities of realization, the static effects and finally the actual production of the element.

  6. Fungi in carpeting and furniture dust.

    Science.gov (United States)

    Schober, G

    1991-11-01

    The qualitative and quantitative species composition of fungi in carpets and upholstered furniture dust found in the living-rooms of nine Dutch dwellings was examined in a pilot study. Numbers of spores of xerophilic fungi did not differ in dust removed from carpeting and upholstery. Spores of hydrophilic species were found to be more predominant on floors (P less than 0.05), whereas meso-hygrophilic spores, largely dominated by allergologically relevant Penicillium species, were significantly more abundant in dust taken from regularly used furniture (P less than 0.05). Our results indicate that growth conditions for fungi in the micro-habitats of furniture differ from those in carpeting. No statistically significant differences in number of viable spores have been found in samples taken from ground-floor level compared with those taken from 1st to 3rd floor level of dwellings. From this study, the need for a micro-topographic analysis of the fungal flora in the human environment has become apparent. Efficient allergological home sanitation in dwellings of allergic patients requires detailed data about the colonization of the various micro-habitats by allergenic fungi.

  7. METHODS FOR DETERMINING THE AESTHETIC APPEAL OF FURNITURE

    Directory of Open Access Journals (Sweden)

    Mária Réka ANTAL

    2016-03-01

    Full Text Available The world of furniture market is getting more and more complex than it was before. In recent years the habits of buying furniture have changed. The fabrication of individual pieces of furniture is increasingly coming to the front. A personal contact is being established between the customer and the furniture, which is a relationship of one product to one customer. In order to satisfy the individual demands, higher prices and higher quality are needed. The competition is beginning at the market and emotion plays an important role in it. Therefore, functionality and aesthetic functions, determinative forms, fashionable style play a very important role in furniture design and production. Some methods are presented such as RMQD or FMEA used for determining aesthetics of furniture.

  8. Dinamika Budaya Material pada Desain Furnitur Kayu di Indonesia

    Directory of Open Access Journals (Sweden)

    Arianti Ayu Puspita Ayu Puspita

    2016-09-01

    ABSTRAK   Perubahan kondisi ekonomi hingga abad ke-21, dan meningkatnya kebutuhan furnitur baik dari luar maupun dalam negeri, kemudian perkembangan ilmu desain di Indone sia, secara tidak langsung berhubungan de ngan permasalahan ekologi. Ketersediaan sumber daya alam seperti kayu, semakin berkurang sehingga mendorong industri furnitur di Indonesia untuk menggunakan alternatif berbagai macam kayu solid, kayu olahan hingga kayu limbah. Dari waktu ke waktu, perubahan kondisi sosial, ekonomi, dan gaya hidup, turut berperan pada kemunculan bentuk-bentuk furnitur baru di Indonesia. Pada penelitian ini, transformasi   kebutuhan material kayu pada furnitur akan dikaitkan dengan dinamika sosial budaya yang terjadi dari abad ke-18 hingga abad ke-21 di Indonesia. Tansformasi  akan dilihat berdasarkan perubahan teori Material Cultural Studies, yang kemudian akan menghasilkan kesimpulan bahwa konsep ekologi berperan penting dalam perkembangan desain furnitur kayu di Indonesia.   Kata kunci: transformasi budaya, furnitur, kayu, Indonesia, ekologi

  9. Climate accounting for waste management, Phase I and II. Summary: Phase 1: Glass Packaging, Metal packaging, paper, cardboard, plastic and wet organic waste. Phase 2: Wood waste and residual waste from households; Klimaregnskap for avfallshaandtering, Fase I og II. Sammendrag: Fase 1: Glassemballasje, metallemballasje, papir, papp, plastemballasje og vaatorganisk avfall. Fase 2: Treavfall og restavfall fra husholdninger

    Energy Technology Data Exchange (ETDEWEB)

    Raadal, Hanne Lerche; Modahl, Ingunn Saur; Lyng, Kari-Anne

    2009-09-15

    Background. On the basis of an increased focus on emissions of greenhouse gases in general, Waste Norway wanted to prepare a climate accounting for waste management in Norway. Oestfoldforskning was engaged to undertake the project. The aim of the project has been to develop a model for the calculation of net greenhouse gas emissions from different waste types of waste glass containers, metal containers, paper, cardboard, plastic, wet organic waste, wood waste and residual waste. The model is based on life cycle methodology and is used to calculate the net greenhouse gas emissions per kg of waste for the various waste management options and waste types, as well as to calculate the net greenhouse gas emissions for waste management for including waste types and quantities of 2006. There is an emphasis on developing a model so that municipalities / waste companies or regions can develop their own climate accounting for waste management in their region, based on site-specific conditions associated with types and amounts of waste, transport distances, type of treatment, exploitation and use of waste generated energy etc. The model can also be used as the basis for the preparation of useful documentation as the basis for information about waste systems utility in general, and as a basis for strategic reviews for Waste Norway and the waste sector in particular. Conclusions: The main conclusions from the project can be summarized as follows: 1. The results of the study clearly shows that to consider only one environmental indicator is too narrow approach to form the basis for decision making for selection of waste management solutions. 2. Net greenhouse gas emissions for waste management varies greatly, both between the different types of waste and treatment methods which are reviewed. The main results of the ranking of management methods in relation to the net greenhouse effect associated with the waste types and treatment methods are as follows: Recycling of materials

  10. Handling wood shavings

    Energy Technology Data Exchange (ETDEWEB)

    1974-09-18

    Details of bulk handling equipment suitable for collection and compressing wood waste from commercial joinery works are discussed. The Redler Bin Discharger ensures free flow of chips from storage silo discharge prior to compression into briquettes for use as fuel or processing into chipboard.

  11. The Influence of Furniture on Air Velocity in a Room

    DEFF Research Database (Denmark)

    Nielsen, J. R.; Nielsen, Peter V.; Svidt, Kjeld

    Using isothermal full-scale experiments and 3-dimensional CFD simulations it is investigated how normal office furniture influences the air movements in a mixing ventilated room. Two different types of inlets are used in the experiments and a set-up with normal office furniture is made. The set......-up is simulated with one of the inlets where a volume resistance represents the furniture....

  12. Residential Waste

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund; Fruergaard, Thilde; Matsufuji, Y.

    2011-01-01

    are discussed in this chapter. Characterizing residential waste is faced with the problem that many residences already divert some waste away from the official collection systems, for example performing home composting of vegetable waste and garden waste, having their bundled newspaper picked up by the scouts...... twice a year or bringing their used furniture to the flea markets organized by charity clubs. Thus, much of the data available on residential waste represents collected waste and not necessarily all generated waste. The latter can only be characterized by careful studies directly at the source......, but such studies are very expensive if fair representation of both spatial and temporal variations should be obtained. In addition, onsite studies may affect the waste generation in the residence because of the increased focus on the issue. Residential waste is defined in different ways in different countries...

  13. Wood Smoke

    Science.gov (United States)

    Smoke is made up of a complex mixture of gases and fine, microscopic particles produced when wood and other organic matter burn. The biggest health threat from wood smoke comes from fine particles (also called particulate matter).

  14. Rapid microwave-assisted acid extraction of southern pine waste wood to remove metals from chromated copper arsenate (CCA) treatment

    Science.gov (United States)

    Chung-Yun Hse; Todd F. Shupe; Bin Yu

    2013-01-01

    Recovery of metals from chromated copper arsenate (CCA)-treated southern pine wood particles was investigated by extraction in a microwave reactor with binary combinations of acetic acid (AA), oxalic acid (OxA), and phosphoric acid (PhA). Use of OxA was not successful, as insoluble copper oxalate complexes impeded copper removal. The combination of OxA and AA also had...

  15. Aim for Wow-ability when Selecting Student Center Furniture.

    Science.gov (United States)

    Payne, Jill M.

    2003-01-01

    Advises colleges to keep in mind several qualities when purchasing furniture for student centers: durability, cleanability, repairability, flexibility, storability, credibility, sustainability, comfort, affordability, and "wowability." (EV)

  16. Effect of different extracting solutions on the electrodialytic remediation of CCA-treated wood waste Part I. - Behaviour of Cu and Cr

    DEFF Research Database (Denmark)

    Velizarova, E.; Ribeiro, A. B.; Mateus, E.

    2004-01-01

    Removal of Cu and Cr from chromated copper arsenate (CCA)-treated wood waste under batch electrodialytic conditions was studied. The effect of different types of extracting solutions, such as deionised water or aqueous solutions of NaCl, formic acid, oxalic acid, and EDTA, on the magnitude...... and direction of the fluxes of Cu- and Cr-containing species in the electrodialytic cell was investigated. Oxalic acid was found to have the best performance if simultaneous removal of the two elements is required (removal efficiencies of 80.5% for Cu and 87.4% for Cr, respectively). A mixture of oxalic acid...... and formic acid also led to similar removal efficiencies. In these experiments, the target elements were accumulated in both the anode and cathode compartments of the electrodialytic cell due to the formation of negatively charged complexes with the organic acids used besides the free cationic forms...

  17. FY 1992 report on the development of wood-waste/agri-waste pyrolytic gasification technology and utilization technology of gas product; 1992 nendo mokushitsukei haikibutsu no netsubunkai gas ka gijutsu to seisei gas no riyo gijutsu kaihatsu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-03-01

    It is urgently necessary for the Philippines, which has no promising energy source to replace imported oil and lacks hard currencies, to reduce dependence on oil. The country, consisting of a number of islands, has faced many difficulties in construction of large-scale power transmission grids covering wide areas, which greatly retard development of local industries and dissemination of electricity. Therefore, great expectations have been placed on the techniques this project plans to develop for utilization of wastes as the energy source. This 5-year project (FY 1990 to 1994) is aimed at joint research and development of (thermal decomposition/gasification and power generation system) for transforming large quantities of wood-wastes/agri-wastes left unutilized into electric power, in which thermal decomposition/gasification of the wastes is combined with gas engine/power generator systems, and thereby to establish the systems suitable for the developing country. The major R and D results obtained in FY 1992 as the third year include on-the-spot surveys, tests for validating elementary techniques, designs and fabrication of part of the demonstration plant, and invitation of Philippine researchers to Japan. (NEDO)

  18. FY 1990 report on the development of wood-waste/agri-waste pyrolytic gasification technology and utilization technology of gas product; 1990 nendo mokushitsukei haikibutsu no netsubunkai gas ka gijutsu to seisei gas no riyo gijutsu kaihatsu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-03-01

    It is urgently necessary for the Philippines, which has no promising energy source to replace imported oil and lacks hard currencies, to reduce dependence on oil. The country, consisting of a number of islands, has faced many difficulties in construction of large-scale power transmission grids covering wide areas, which greatly retard development of local industries and dissemination of electricity. Therefore, great expectations have been placed on the techniques this project plans to develop for utilization of wastes as the energy source. This 5-year project (FY 1990 to 1994) is aimed at joint research and development of (thermal decomposition/gasification and power generation system) for transforming large quantities of wood-wastes/agri-wastes left unutilized into electric power, in which thermal decomposition/gasification of the wastes is combined with gas engine/power generator systems, and thereby to establish the systems suitable for the developing country. The major R and D results obtained in FY 1990 as the initial year include negotiations with the Philippines, on-the-spot surveys for the demonstration plant sites and conditions, and conceptual designs of the demonstration plant. (NEDO)

  19. FY 1991 report on the development of wood-waste/agri-waste pyrolytic gasification technology and utilization technology of gas product; 1991 nendo mokushitsukei haikibutsu no netsubunkai gas ka gijutsu to seisei gas no riyo gijutsu kaihatsu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-03-01

    It is urgently necessary for the Philippines, which has no promising energy source to replace imported oil and lacks hard currencies, to reduce dependence on oil. The country, consisting of a number of islands, has faced many difficulties in construction of large-scale power transmission grids covering wide areas, which greatly retard development of local industries and dissemination of electricity. Therefore, great expectations have been placed on the techniques this project plans to develop for utilization of wastes as the energy source. This 5-year project (FY 1990 to 1994) is aimed at joint research and development of (thermal decomposition/gasification and power generation system) for transforming large quantities of wood-wastes/agri-wastes left unutilized into electric power, in which thermal decomposition/gasification of the wastes is combined with gas engine/power generator systems, and thereby to establish the systems suitable for the developing country. The major R and D results obtained in FY 1991 as the second year include on-the-spot surveys, tests for validating elementary techniques, designs and fabrication of part of the demonstration plant, and invitation of Philippine researchers to Japan. (NEDO)

  20. Leaching of TCIPP from furniture foam is rapid and substantial.

    Science.gov (United States)

    Stubbings, William A; Harrad, Stuart

    2018-02-01

    A series of laboratory experiments were conducted, in which waste furniture polyurethane foam samples containing tris (1-chloro-2-propyl) phosphate (TCIPP) were contacted with a range of leaching fluids, formulated to simulate the composition of landfill leachate. Leaching was examined under a number of different scenarios, such as: dissolved humic matter concentration, pH, and temperature, as well as the effect of agitation, and waste:leaching fluid contact duration. In addition to single batch (no replenishment of leaching fluid), serial batch (draining of leachate and replenishment with fresh leaching fluid at various time intervals) experiments were conducted. Leaching of TCIPP from PUF appears to be a first order process. Concentrations of TCIPP in leachate generated by the experiments in this study ranged from 13 mg L -1 to 130 mg L -1 . In serial batch leaching experiments, >95% of TCIPP was depleted from PUF after 168 h total contact with leaching fluid. Our experiments indicate leaching is potentially a very significant pathway of TCIPP emissions to the environment. Copyright © 2017. Published by Elsevier Ltd.

  1. Hazardous properties of paint residues from the furniture industry.

    Science.gov (United States)

    Vaajasaari, Kati; Kulovaara, Maaret; Joutti, Anneli; Schultz, Eija; Soljamo, Kari

    2004-01-30

    The objective of this study was to screen nine excess paint residues for environmental hazard and to evaluate their disposability in a non-hazardous or hazardous-waste landfill. These residues were produced in the process of spray-painting furniture. Residues were classified according to their leaching and ecotoxicological properties. Leaching properties were determined with the European standard SFS-EN 12457-2 leaching-test. The toxicity of the leaching-test eluates was measured with plant-, bacteria- and enzyme-inhibition bioassays. Total organic carbon, formaldehyde and solvent concentrations in the solid wastes and in the leaching-test eluates were analysed. It seemed likely that leached formaldehyde caused very high acute toxicity in leaching-test eluates of the dry-booth residues. This hypothesis was based on the fact that the formaldehyde concentrations in the leaching-test eluates of the dry-booth residues were 62-75 times higher than the EC50 value reported in the literature for formaldehyde. The results of the water-curtain booth residues showed that the samples with the highest TOC and aromatic solvent concentrations were also the most toxic. The studied excess paint residues were complex organic mixtures and contained large amounts of compounds not identifiable from chemical data. Therefore, the evaluation of the hazard based solely on available chemical data is unlikely to be sufficient, as evidenced by our study. Our results show that harmful compounds remain in the solid waste and the toxicity results of their leaching-test eluates show that toxicity may leach from residues in contact with water at landfill sites. They also confirm the benefit of combining chemical and ecotoxicological assays in assessing the potential environmental hazard of complex organic mixtures found in wastes. Copyright 2003 Elsevier B.V.

  2. INVESTIGATION ON THE QUALITY OF BRIQUETTES MADE FROM RARELY USED WOOD SPECIES, AGRO-WASTES AND FOREST BIOMASS

    Directory of Open Access Journals (Sweden)

    Camelia COŞEREANU

    2015-03-01

    Full Text Available Characteristics of briquettes made from various biomass resources (staghorn sumac wood, vineyard and apple tree pruning biomass, pine cones, corn stalk and corn cobs were investigated in the present paper. The moisture content of raw materials was first determined, before compacting them in a hydraulic briquetting machine. Briquettes with diameter of 40mm and various lengths were obtained. Five replicates of each briquette type were selected for the determination of density, compression strength and calorific value. The results were compared to those of beech and pine briquettes obtained under similar conditions. Based on the experimental results, mathematical correlations between density and compression strength and density and calorific value were investigated.

  3. Comparison of vermicompost characteristics produced from sewage sludge of wood and paper industry and household solid wastes.

    Science.gov (United States)

    Amouei, A I; Yousefi, Z; Khosravi, T

    2017-01-01

    The aim of this study was to determine the potential of produced compost from the sludge of wastewater treatment plant using earthworms and compare it with the vermicompost produced from household solid waste. In the current study, three treatments with the same conditions in terms of organic wastes type were prepared to produce vermicompost from household solid waste and sewage sludges using earthworms. The standard methods were used to determine the physical and chemical parameters in the different produced vermicomposts. The mean of C/N in the household solid waste, raw biological and chemical sludges was 32, 22.5, and 26.5, respectively. These levels were 16.5, 14.5, and 15 in the vermicomposts. The mean of nitrogen and phosphorus percentages in the vermicompost of solid waste, biological and chemical sludges was 2.2%, 2.6%, 2.3% and 0.72%, 0.54%, and 0.56%, respectively. The mean percentages of organic matters in the initial substrates and vermicomposts of solid waste, biological and chemical sludges were 97.2%, 90%, 80.5% and 65.8%, 67.8% and 63% respectively. The concentrations of heavy metals decreased in all vermicomposts. The EC levels in solid waste, biological and chemical sludges were 1459, 1041, and 1487 μs/cm, respectively. These levels were 544, 385 and 635 μs/cm in the produced compost. Eisenia fetida can convert household solid waste, and biological and chemical sludges produced from wastewater treatment plant into a high-quality and acceptable compost.

  4. Advanced CFD modelling of air and recycled flue gas staging in a waste wood-fired grate boiler for higher combustion efficiency and greater environmental benefits.

    Science.gov (United States)

    Rajh, Boštjan; Yin, Chungen; Samec, Niko; Hriberšek, Matjaž; Kokalj, Filip; Zadravec, Matej

    2018-07-15

    Grate-fired boilers are commonly used to burn biomass/wastes for heat and power production. In spite of the recent breakthrough in integration of advanced secondary air systems in grate boilers, grate-firing technology needs to be advanced for higher efficiency and lower emissions. In this paper, innovative staging of combustion air and recycled flue gas in a 13 MW th waste wood-fired grate boiler is comprehensively studied based on a numerical model that has been previously validated. In particular, the effects of the jet momentum, position and orientation of the combustion air and recycled flue gas streams on in-furnace mixing, combustion and pollutant emissions from the boiler are examined. It is found that the optimized air and recycled flue gas jets remarkably enhance mixing and heat transfer, result in a more uniform temperature and velocity distribution, extend the residence time of the combustibles in the hot zone and improve burnout in the boiler. Optimizing the air and recycled flue gas jet configuration can reduce carbon monoxide emission from the boiler by up to 86%, from the current 41.0 ppm to 5.7 ppm. The findings of this study can serve as useful guidelines for novel design and optimization of the combustion air supply and flue gas recycling for grate boilers of this type. Copyright © 2018 Elsevier Ltd. All rights reserved.

  5. The Impact of Clustering on the Innovativeness Of Furniture Industry

    Directory of Open Access Journals (Sweden)

    Grzegorzewska Emilia

    2014-06-01

    Full Text Available The furniture industry in Poland is a rapidly growing area of the economy. The level of innovation strongly influences furniture enterprises competitive position on the market. To support innovation, small and medium furniture industry businesses are affiliate in cluster initiatives. It supports the area of R&D, joint promotional campaigns and financing of new ventures. The paper presents selected furniture industry cluster initiatives that implement policies to support innovation activities of enterprises affiliated to them. In Poland, more and more furniture industry businesses brings together in cluster initiatives that aim to improve their market competitiveness and increase the level of innovation. Taken studies allow to analyse the direction of innovative activities undertaken by companies of the furniture industry with particular emphasis on the ones associated in clusters. Thus the aim of the article is to investigate the interest of Polish furniture enterprises (especially SMEs, in participation in clusters. Moreover the benefits of that choice and its impact on Polish furniture manufacturers innovativeness are evaluated.

  6. The Business of: School Furniture: Innovative Designs for Tomorrow's Learning

    Science.gov (United States)

    Lacey, Kylie

    2013-01-01

    As instruction shifts to a learner-centric, individualized approach with a focus on small group activities, heavy furniture that small hands cannot move on their own have become less desirable. The most popular pieces are lightweight, portable, and colorful. The Smith System furniture company encourages schools to select chairs and desks in their…

  7. Furniture Industry in Kenya : Situational Analysis and Strategy

    OpenAIRE

    Creapo Oy; World Bank Group

    2015-01-01

    The Government of Kenya recognizes that the performance of the furniture sector is crucial both to employment and growth in the country. The Ministry of Industrialization and Enterprise Development (MOIED) therefore requested an analysis of both the furniture and timber sectors, in order to understand their current state of development, their main constraints, and the interventions necessa...

  8. Assessing the global warming potential of wooden products from the furniture sector to improve their ecodesign

    International Nuclear Information System (INIS)

    González-García, Sara; Gasol, Carles M.; Lozano, Raúl García; Moreira, Ma Teresa; Gabarrell, Xavier; Rieradevall i Pons, Joan; Feijoo, Gumersindo

    2011-01-01

    The main objective of this study was to determine the global warming potential of several wood products as an environmental criterion for their ecodesign. Two methodologies were combined: the quantification of greenhouse gas emissions (equivalent CO 2 ) of several representative wood based products from the furniture sector and the integration of environmental aspects into product design. The products under assessment were classified in two groups: indoor products and outdoor products, depending on their location. “Indoor products” included a convertible cot/bed, a kitchen cabinet, an office table, a living room furniture, a headboard, youth room accessories and a wine crate, while the “Outdoor products” analysed were a ventilated wooden wall and a wooden playground. Spanish wood processing companies located in Galicia (NW Spain) and Catalonia (NE Spain) were analysed in detail. The life cycle of each product was carried out from a cradle-to-gate perspective according to Life Cycle Assessment (LCA) methodology, using global warming potential as the selected impact category. According to the results, metals, boards and energy use appeared to be the most contributing elements to the environmental impact of the different products under assessment, with total contributions ranging from 40% to 90%. Furthermore, eco-design strategies were proposed by means of the methodology known as Design for the Environment (DfE). Improvement strategies viable for implementation in the short term were considered and analysed in detail, accounting for remarkable reductions in the equivalent CO 2 emissions (up to 60%). These strategies would be focused on the use of renewable energies such as photovoltaic cells, the promotion of national fibres or changes in the materials used. Other alternatives to be implemented in the long term can be of potential interest for future developments.

  9. Assessing the global warming potential of wooden products from the furniture sector to improve their ecodesign

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez-Garcia, Sara, E-mail: sara.gonzalez@usc.es [Division of Biology, Department of Life Sciences, Sir Alexander Fleming Building, Imperial College of London, South Kensington Campus, London SW7 2AZ (United Kingdom); Department of Chemical Engineering, School of Engineering, University of Santiago de Compostela, 15782- Santiago de Compostela (Spain); Gasol, Carles M.; Lozano, Raul Garcia [Inedit Innovacio, Carretera de Cabrils, km 2 -IRTA-, 08348 Cabrils, Barcelona (Spain); SosteniPrA - UAB-IRTA, Institute of Environmental Science and Technology (ICTA), Universitat Autonoma de Barcelona (UAB), 08193 Bellaterra, Barcelona (Spain); Moreira, Ma Teresa [Department of Chemical Engineering, School of Engineering, University of Santiago de Compostela, 15782- Santiago de Compostela (Spain); Gabarrell, Xavier; Rieradevall i Pons, Joan [SosteniPrA (UAB-IRTA), Institute of Environmental Science and Technology (ICTA), Universitat Autonoma de Barcelona UAB, 08193 Bellaterra, Barcelona (Spain); Department of Chemical Engineering, Universitat Autonoma de Barcelona (UAB), 08193 Bellaterra, Barcelona (Spain); Feijoo, Gumersindo [Department of Chemical Engineering, School of Engineering, University of Santiago de Compostela, 15782- Santiago de Compostela (Spain)

    2011-12-01

    The main objective of this study was to determine the global warming potential of several wood products as an environmental criterion for their ecodesign. Two methodologies were combined: the quantification of greenhouse gas emissions (equivalent CO{sub 2}) of several representative wood based products from the furniture sector and the integration of environmental aspects into product design. The products under assessment were classified in two groups: indoor products and outdoor products, depending on their location. 'Indoor products' included a convertible cot/bed, a kitchen cabinet, an office table, a living room furniture, a headboard, youth room accessories and a wine crate, while the 'Outdoor products' analysed were a ventilated wooden wall and a wooden playground. Spanish wood processing companies located in Galicia (NW Spain) and Catalonia (NE Spain) were analysed in detail. The life cycle of each product was carried out from a cradle-to-gate perspective according to Life Cycle Assessment (LCA) methodology, using global warming potential as the selected impact category. According to the results, metals, boards and energy use appeared to be the most contributing elements to the environmental impact of the different products under assessment, with total contributions ranging from 40% to 90%. Furthermore, eco-design strategies were proposed by means of the methodology known as Design for the Environment (DfE). Improvement strategies viable for implementation in the short term were considered and analysed in detail, accounting for remarkable reductions in the equivalent CO{sub 2} emissions (up to 60%). These strategies would be focused on the use of renewable energies such as photovoltaic cells, the promotion of national fibres or changes in the materials used. Other alternatives to be implemented in the long term can be of potential interest for future developments.

  10. Assessing the global warming potential of wooden products from the furniture sector to improve their ecodesign.

    Science.gov (United States)

    González-García, Sara; Gasol, Carles M; Lozano, Raúl García; Moreira, María Teresa; Gabarrell, Xavier; Rieradevall i Pons, Joan; Feijoo, Gumersindo

    2011-12-01

    The main objective of this study was to determine the global warming potential of several wood products as an environmental criterion for their ecodesign. Two methodologies were combined: the quantification of greenhouse gas emissions (equivalent CO(2)) of several representative wood based products from the furniture sector and the integration of environmental aspects into product design. The products under assessment were classified in two groups: indoor products and outdoor products, depending on their location. "Indoor products" included a convertible cot/bed, a kitchen cabinet, an office table, a living room furniture, a headboard, youth room accessories and a wine crate, while the "Outdoor products" analysed were a ventilated wooden wall and a wooden playground. Spanish wood processing companies located in Galicia (NW Spain) and Catalonia (NE Spain) were analysed in detail. The life cycle of each product was carried out from a cradle-to-gate perspective according to Life Cycle Assessment (LCA) methodology, using global warming potential as the selected impact category. According to the results, metals, boards and energy use appeared to be the most contributing elements to the environmental impact of the different products under assessment, with total contributions ranging from 40% to 90%. Furthermore, eco-design strategies were proposed by means of the methodology known as Design for the Environment (DfE). Improvement strategies viable for implementation in the short term were considered and analysed in detail, accounting for remarkable reductions in the equivalent CO(2) emissions (up to 60%). These strategies would be focused on the use of renewable energies such as photovoltaic cells, the promotion of national fibres or changes in the materials used. Other alternatives to be implemented in the long term can be of potential interest for future developments. Copyright © 2011 Elsevier B.V. All rights reserved.

  11. Carel Breytspraak Sr., Purveyor to his Majesty King Louis Napoleon. Breytspraak furniture from the collection of the Royal Palace in Amsterdam

    Directory of Open Access Journals (Sweden)

    Paul van Duin

    2013-06-01

    Full Text Available In 1808, King Louis Napoleon had the town hall of Amsterdam converted to Royal Palace. Besides making the necessary architectural alterations, he ordered hundreds of pieces of furniture and other ornamental objects from local furniture makers, upholsterers, decorators and other suppliers. This collection of Empire furniture, which is still preserved in the palace, is today the largest of its kind outside France. Between 2005 and 2009, these pieces of furniture were restored as part of the wider restoration of the entire palace, a gigantic operation that involved hundreds of restoration experts. A furniture committee made sure that quality and looks remained uniform. During the process the restoration experts and researchers made a full study of the furniture, documenting finds and findings, supplemented with research into the origins, the makers, use, techniques and material. This is unique for the Netherlands. The data, recorded in documentation and restoration reports, offer fresh insights in especially the construction and manufacturing process of Dutch Empire furniture. The discoveries are illustrated by a number of purveyances by Carel Breytspraak Sr. (1769-1810, the best paid furniture maker of the king. The 100 chairs he made for the Grand dining room of the palace are an example of pre-modern serial production. This may be inferred from the varying quality of the wood that was used and from the varying thickness of the seat stretchers, among other things. Furthermore, it turned out that the chairs still had the original stuffing, which was reused after having been restored. One chair still had the original upholstery from the days of Louis Napoleon and this was used as the basis for the current upholstery. The chairs are typical examples of furniture made after French decoration prints, which were undoubtedly provided by the king’s architects. The roll-top desk that Breytspraak made for the king’s bedroom is one of the most unique

  12. [Exposure to hazardous chemical substances in furniture industry].

    Science.gov (United States)

    Pośniak, Małgorzata; Kowalska, Joanna; Makhniashvili, Ivan

    2005-01-01

    The aim of the study was to assess the exposure to organic solvents in plants of the furniture industry. Studies were conducted in five furniture plants. Hazardous chemicals present in the air at workposts were determined by capillary gas chromatography with mass spectrometry and flame ionization detection. The analysis of air samples collected at the workposts allowed to identify the following chemicals occurring during varnishing and cleaning of furniture surface elements: acetone, butan-2-one, ethyl, isobutyl and methoxypropyl acetate, 4-methylpentan-2-on, toluene, ethylbenzene and xylenes. Indices characteristic of combined exposure ranged from 0.13 to 1.67 and exceeded the limit value at 21% of workposts. The results of the study indicate that chemicals present at representative workposts during the furniture production are harmful to health of workers, especially those involved in varnishing and cleaning of furniture elements.

  13. FY 1994 report on the development of wood-waste/agri-waste pyrolytic gasification technology and utilization technology of gas product; 1994 nendo mokushitsukei haikibutsu no netsubunkai gas ka gijutsu to seisei gas no riyo gijutsu kaihatsu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    This 5-year joint project (FY 1990 to 1994) by Japan and the Philippines is aimed at joint research and development of (thermal decomposition/gasification and power generation system) for transforming large quantities of wood-wastes/agri-wastes left unutilized in the Philippines into electric power, in which thermal decomposition/gasification of the wastes is combined with a gas engine system. The field tests of the demonstration plant successfully produce power of 100 kW by burning only the low-calorie gas with a heating value near critical level for self-sustained combustion, obtained by gasification of sawdust by the fluidized gasifier and refined, attaining the object of the project. It is confirmed that a 200 to 300 kW class commercial plant can be designed and constructed basically by scaling up the 100 kW demonstration plant. The other data obtained by the field tests include those for improved operability and maintainability, gas purification, and reducing sizes of the facilities, including utility facilities. (NEDO)

  14. Analysis of black japanned furniture by XRF

    Energy Technology Data Exchange (ETDEWEB)

    Felix, Valter de S.; Oliveira, Ana L.C. de; Freitas, Renato P., E-mail: valter.felix@ifrj.edu.br, E-mail: renato.freitas@ifrj.edu.br, E-mail: annalecastro@hotmail.com [Instituto Federal do Rio de Janeiro (LISCOMP/IFRJ-CPAR), Paracambi, RJ (Brazil). Lab. de Instrumentação e Simulação Computacional; Pereira, Marcelo O.; Carvalho, Cristiano S.; Silva, Fabricio L., E-mail: marcelocefetrj@gmail.com [Centro Federal de Educação Tecnológica Celso Suckow da Fonseca (CEFET), Nova Iguaçu, RJ (Brazil)

    2017-07-01

    Currently, X-ray fluorescence (XRF) is the most employed technique to characterize Cultural Heritage artifacts. The increasing use of this technique in this research field is due to technological developments that occurred during the last decade, which enabled the construction of easy to handle, XRF portable systems that allow fast, non-destructive and in situ analyses. One of the most common applications of XRF is the characterization of inorganic pigments in works of art, polychrome sculptures, etc. The information obtained in this type of analysis is essential for a better knowledge of the history of the work of art and for restorers and conservators who can choose better intervention methods. In this paper, a European black Japanned furniture dated between the eighteenth and the nineteenth centuries was analyzed by XRF. The analyses were carried out in situ using a portable XRF system, Tracer IV model from Bruker, which has a Rh anode. The analyses allowed concluding that the pigments in the polychrome are: lamp black, vermilion, brown ochre, Prussian blue and green earth. In addition to the polychrome in high relief, the furniture has golden regions where gold was identified mixed with lead-based historical pigments. The results obtained, besides helping to confirm the authenticity of the artifact, were also useful for restorers to choose suitable methods to intervene the work of art, which has recently undergone restoration. (author)

  15. Does Saudi school furniture meet ergonomics requirements?

    Science.gov (United States)

    Ramadan, Mohamed Zaki

    2011-01-01

    The goal of this research was to study the effect of adjustable imported desk and chair combinations available in the market on student performance. Six sets of chairs and tables within three different activities (reading, writing, and looking to the blackboard) were the independent variables. Evaluation of back force at 5th lumbar vertebrae and the 1st sacrum (L5/S1), subjective measures of discomfort, and the mismatch between student body dimension and classroom furniture analysis were measured. A total of 124 young male students (first through sixth-grade) participated in this experiment. The results revealed too low or too high chair and table heights relative to the students' body dimensions increased the stresses acting at L5/S1 as well as discomfort ratings. This study indicated there was a high level of body mismatch in desk-chair combinations even with the adjustable imported furniture available in the local market. Anthropometric data of Saudi students should be collected from different regions in the Kingdom and then design and development of desk-chair combinations could follow the development of a standard procedure to adapt to the needs of Saudi school children.

  16. Analysis of black japanned furniture by XRF

    International Nuclear Information System (INIS)

    Felix, Valter de S.; Oliveira, Ana L.C. de; Freitas, Renato P.

    2017-01-01

    Currently, X-ray fluorescence (XRF) is the most employed technique to characterize Cultural Heritage artifacts. The increasing use of this technique in this research field is due to technological developments that occurred during the last decade, which enabled the construction of easy to handle, XRF portable systems that allow fast, non-destructive and in situ analyses. One of the most common applications of XRF is the characterization of inorganic pigments in works of art, polychrome sculptures, etc. The information obtained in this type of analysis is essential for a better knowledge of the history of the work of art and for restorers and conservators who can choose better intervention methods. In this paper, a European black Japanned furniture dated between the eighteenth and the nineteenth centuries was analyzed by XRF. The analyses were carried out in situ using a portable XRF system, Tracer IV model from Bruker, which has a Rh anode. The analyses allowed concluding that the pigments in the polychrome are: lamp black, vermilion, brown ochre, Prussian blue and green earth. In addition to the polychrome in high relief, the furniture has golden regions where gold was identified mixed with lead-based historical pigments. The results obtained, besides helping to confirm the authenticity of the artifact, were also useful for restorers to choose suitable methods to intervene the work of art, which has recently undergone restoration. (author)

  17. Effect of non-tariff barriers on secondary processed wood product trade: New Zealand exports to the United States, China and Japan

    Science.gov (United States)

    James A. Turner; Joseph Buongiorno; Shushuai Zhu; Frances Maplesden

    2008-01-01

    Secondary processed wood products - builder's carpentry and joinery, moldings and millwork, wooden furniture, and prefabricated buildings - have grown significantly in importance in the global trade of wood products. At the same time there has been increased use of non-tariff barriers to restrict their trade.  These barriers could have an important impact on the...

  18. Wood composites

    Science.gov (United States)

    Lars Berglund; Roger M. Rowell

    2005-01-01

    A composite can be defined as two or more elements held together by a matrix. By this definition, what we call “solid wood” is a composite. Solid wood is a three-dimensional composite composed of cellulose, hemicelluloses and lignin (with smaller amounts of inorganics and extractives), held together by a lignin matrix. The advantages of developing wood composites are (...

  19. EVOLUTION OF LIGHTWEIGHT WOOD COMPOSITES

    Directory of Open Access Journals (Sweden)

    Marius C. BARBU

    2016-01-01

    Full Text Available Lightweight boards and beams in the wood-based construction and furniture industry are not a new topic. The density reduction of panels using sandwich structure with light cores was confirmed by users like doors or mobile homes more than three decades ago. Today many ways to attain a lighter wooden structure are on offer, partially in industrial application. The first one is the use of light-weight wood species like balsa, lime, pine from southern hemisphere plantations etc. limited by the availability, strength properties, gluability and so on. A second one is the sandwich structure made from hard faces like thick veneer, thin plywood, particleboard or high density thin fiberboard and cores made from honeycomb paper, very light wood species or foams like the polystyrene one. A third way to produce a light structure is to reduce the core drastically, using predesigned skeletons with special shapes and connections to the faces. The engines for these developments are on the one hand the fast growing market of knockdown furniture and on the other hand the increasing costs for energy and raw materials. Additional factors that make weight saving a primary economical objective for most producers are transportation costs, easier handling and higher acceptance among the end users. Moreover, customers demand more for ergonomical solutions regarding packaging. Many patents were generated by researchers and developers for new one-stage production processes for sandwich panels with wood- and impregnated paper-based facings made from veneers, particles or fibres and a core consisting of expandable foams, particles or embedded hard skeletons. These ideas or prototypes could be integrated in existing continuous pressing lines for wood based panels keeping some of the advantages of the continuous production technique in matters of efficiency. Some of the challenges of the light weight wooden structure are the connection in half or final parts, resistance to

  20. 5000 sustainable workplaces - Wood energy provides work

    International Nuclear Information System (INIS)

    Keel, A.

    2009-01-01

    This article presents the results of a study made by the Swiss Wood Energy Association on the regional and national added value resulting from large wood-fired installations in Switzerland. The number of workplaces created by these installations is also noted. Wood energy is quoted as not only being a way of using forest wastes but also as being a creator of employment. Large wood-fired heating installations are commented on and efforts to promote this type of energy supply even further are discussed. The study indicates which professions benefit from the use of wood energy and quantifies the number of workplaces per megawatt of installed power that result.

  1. Developments in undergraduate wood science education at Stellenbosch University, South Africa

    OpenAIRE

    Rypstra,Tim

    2011-01-01

    In South Africa, Stellenbosch University (SU) is the designated provider of Bachelor, Master and Doctorate level qualifications in Forestry and Wood Products Science. SU provides educational programs to both mechanical (sawmilling, preservation, composite products, furniture, etc.) and the chemical (pulp & paper) processing sectors. To ensure academic quality, SU regularly has her academic programs assessed externally. In 2000, several changes to the then existing 4 year B.Sc. Wood Scienc...

  2. Wood preservation

    Science.gov (United States)

    Rebecca E. Ibach

    1999-01-01

    When left untreated in many outdoor applications, wood becomes subject to degradation by a variety of natural causes. Although some trees possess naturally occurring resistance to decay (Ch. 3, Decay Resistance), many are in short supply or are not grown in ready proximity to markets. Because most commonly used wood species, such as Southern Pine, ponderosa pine, and...

  3. How to improve the performance of UV cured wood coatings?

    International Nuclear Information System (INIS)

    Mariane Poitoux

    2007-01-01

    Adhesion, scratch and wear resistance are key properties for industrial wood coatings, both for furniture and parquet flooring. Different techniques can be used to evaluate the performances of a coating and results can be strongly affected only by changing the measuring tool used. This paper will explain the different methods available to assess the adhesion, the scratch and wear resistance and their relevancy. The role played by the different oligomers and monomers will be shown, as the impact of the photoinitiator package. (Author)

  4. Wood Products Consumption for Industrial Markets in the United States, Testing a New Research Method

    Science.gov (United States)

    Craig Adair; David B. McKeever

    2013-01-01

    In early 2012, APA-The Engineered Wood Association conducted studies of three industries: institutional furniture, motor homes, and travel trailers and campers. The survey procedure was the same as that used by APA for many years. Lists of individual manufacturers were purchased, a telephone interviewing company was hired to administer a questionnaire, and APA...

  5. Strength and durability of one-part polyurethane adhesive bonds to wood

    Science.gov (United States)

    C. B. Vick; E. A. Okkonen

    1998-01-01

    One-part polyurethane wood adhesives comprise a new class of general purpose consumer products. Manufacturersa claims of waterproof bonds brought many inquiries to the Forest Products Laboratory (FPL) from users constructing aircraft, boats, lawn furniture, and other laminated materials for outdoor use. Although FPL has technical information on several types of...

  6. DEMONSTRATION OF A NO-VOC/NO-HAP WOOD KITCHEN CABINET COATING SYSTEM

    Science.gov (United States)

    The report gives results of the development and demonstration of a no-VOC (volatile organic compound)/no-HAP (hazardous air pollutant) wood furniture coating system at two cabinet manufacturing plants: one in Portland, OR, and the other in Redwood City, CA. Technology transfer ef...

  7. Classification of waste wood treated with chromated copper arsenate and boron/fluorine preservatives; Classificacao de residuos de madeira tratada com preservativos a base de arseniato de cobre cromatado e de boro/fluor

    Energy Technology Data Exchange (ETDEWEB)

    Ferrarini, Suzana Frighetto; Santos, Heldiane Souza dos; Miranda, Luciana Gampert; Azevedo, Carla M.N.; Pires, Marcal J.R., E-mail: suzana.ferrarini@gmail.com [Faculdade de Quimica, Pontificia Universidade Catolica do Rio Grande do Sul, Porto Alegre, RS (Brazil); Maia, Sandra Maria [Instituto de Quimica, Universidade Federal do Rio Grande do Sul, Porto Alegre, RS (Brazil)

    2012-07-01

    Classification of waste wood treated with chromated copper arsenate (CCA) and boron/fluorine preservatives, according to NBR 10004, was investigated. The leaching test (ABNT NBR 10005) for As and Cr, and solubilization test (ABNT NBR 10006) for F, were applied to out-of-service wooden poles. Concentrations of As and Cr in leachates were determined by ICP-MS and of F by ESI. Values for As were higher than 1 mg L{sup -1} classifying the waste as hazardous material (Class I) whereas values for F (> 1.5 mg L{sup -1}) were non-hazardous but indicated non-inert material (Class IIA). (author)

  8. Proxemic Transitions: Designing Shape-Changing Furniture for Informal Meetings

    DEFF Research Database (Denmark)

    Grønbæk, Jens Emil; Korsgaard, Henrik; Petersen, Marianne Graves

    2017-01-01

    Shape-changing interfaces is an emerging field in HCI that explores the qualities of physically dynamic artifacts. At furniture-scale such dynamic artifacts have the potential of changing the ways we collaborate and engage with spaces. In- formed by theories of proxemics, empirical studies...... of informal meetings and design work with shape-changing furniture, we develop the notion of proxemic transitions. We present three design aspects of proxemic transitions: transition speed, step- wise reconfiguration, and situational flexibility. The design aspects focus on how to balance between physical...... between a table and a board surface. These contributions outline important aspects to consider when designing shape-changing furniture....

  9. Effect of wood waste on the digestibility of carbohydrates and the level of volatile fatty acids in sheep

    Energy Technology Data Exchange (ETDEWEB)

    Zelanak, I; Cerny, I; Apalovic, R; Doskova, E

    1977-01-01

    In sheep, the use of steam-treated beech sawdust and thickened aqueous hydrolyzate of beech wood (xylocel) as a replacer for ground barley straw favorably influenced the digestibility of monosaccharides, cellulose, lignin, and total dry matter of the diet. Sawdust reduced the concentration of total volatile fatty acids (VFA) in the rumen content, but the ratio of HOAc to EtCO/sub 2/H (A:P) was lower and the energetic efficiency of the VFA produced was higher in the diet containing sawdust. The addition of urea to the diet with beech sawdust conditioned less effectively, and did not give a clear effect. Urea increased the digestibility of pentosans, glucose, and cellulose, but reduced the energetic efficiency of the VFA produced. Xylocel had no clear effect on the digestibility of sugars, either. The higher A:P ratio and the lower energetic efficiency of the VFA produced testify to the fact that xylocel in combination with beet molasses was not a sufficient replacer of sugar beet carbohydrates.

  10. The `ASCAB` process of producing synthesis gas (methanol, ammonia) or medium joule gas from lignin-cellulose materials (wood, sugar cane wastes, peat, straw, agricultural wastes)

    Energy Technology Data Exchange (ETDEWEB)

    Carre, J

    1988-12-31

    The aim of this work is to relate the build a demonstration unit at a small city in France, on the principle of pressurized gasification of lignin-cellulose biomass with oxygen and steam, for the production of methanol, ammonia and low btu gases. In another type of application, the process should also be used for the incineration of some industrial wastes. (author) 8 figs., 1 tab.

  11. Report to the Radioactive Waste Management Committee on the first international workshop on seabed disposal of high-level wastes, Woods Hole, Massachusetts, February 16--20, 1976

    International Nuclear Information System (INIS)

    Anderson, D.R.; Hollister, C.D.; Talbert, D.M.

    1976-04-01

    The basic conclusion of the workshop is that, while a very considerable amount of work must be done to assure safety and feasibility, no technical reasons are apparent at this moment that would preclude disposal of radioactive wastes underneath the seafloor. Subsidiary conclusions reached by subgroups dealing with undersea geology, biology, the water column, and disposal canister research are given. General conclusions reached by the workshop are detailed together with proposals for an international program furthering an undersea disposal scheme

  12. Radial variation of wood physical properties in Pinus patula growing in Mozambique

    Directory of Open Access Journals (Sweden)

    Claudio Gumane Francisco Juizo

    2015-09-01

    Full Text Available  This study aimed to evaluate wood physical properties of Pinus patula, aged 38, from a forest stand located in Machipanda, central region of Mozambique. Determination of physical properties, such as basic specific gravity, shrinkage, and moisture content of wood in the pith-bark followed the recommendations of the Panamerican Standard - COPANT. Results showed statistically significant differences at significance level of 5%, in the radial direction for the shrinkage coefficient in the pith-bark. Radial and tangential shrinkage values were 6.06 and 8.80% in juvenile wood and 6.18 and 8.65% in adult wood, respectively, with anisotropy coefficient of 1.43 for juvenile wood and 2.44 for adult wood. Pinus patula growing in Inhamacari forest shows stable wood at age 38. It can be used for structural purposes and for manufacture of joinery and furniture.

  13. The structural analysis of small and medium size furniture ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-12-17

    Dec 17, 2008 ... furniture enterprises in Turkey based on production, capacity use and .... has important structural, organizational and technological deficiencies, but it has .... the equipment they need change in compliance with the order they ...

  14. Anthropometric measurements for ergonomic design of students’ furniture in India

    Directory of Open Access Journals (Sweden)

    Ismail Wilson Taifa

    2017-02-01

    Full Text Available This paper presents anthropometric measurements regarding engineering students in India. Health survey (ergonomic assessment was carried out to know the health status of all students who have been using poorly designed furniture. The data were measured with the help of various tools. After data collection and analysis, authors came up with exhaustive dimensions for designing adjustable classrooms furniture. Dimensions recommended include; bench surface height, bench depth and width, back rest width and height, backrest angle, desk height, desk depth, width, and desk angle. Therefore, an implementation of these data will help to create comfortability, safety, well-being, suitability, reduce Musculoskeletal disorders, and improve performance of students in terms of attentiveness. Also, it is highly recommended to consider requirements from students in designing classrooms furniture and conduct seminar or workshop to educate students regarding the negative impact towards adapting poor posture in the long usage of classrooms furniture.

  15. Competing Explanations in the Evolution of the Danish Furniture Industry

    DEFF Research Database (Denmark)

    Howells, John

    This article assesses the credibility and relative economic importance of the many real and proposed unique development events in the Post-War evolution of the Danish furniture industry by means of available trade and production time series. It finds first, that the Danish industry experienced its...... only exceptional growth event compared to other developed country furniture industries in the 1950s. It is argued that this establishes as the leading causal candidates for the Danish economic specialisation in furniture; subsidised export marketing of Danish Modern style in the US and the War......-undamaged Danish industry’s opportunistic exploitation of recovering European Post-War furniture markets. Second, the apparent prominence of particle board manufacture in today’s industry is a Danish specialisation with its origin in the 1950s growth event. Third, while there is much evidence that IKEA became...

  16. About furniture. Before and after Ptolomaeus Philadelphos' pavilion

    Directory of Open Access Journals (Sweden)

    Elena Calandra

    2010-07-01

    Full Text Available The furniture is of primary importance towards the canopies definition, more than the architectonic structure: they  contribute, in fact, in creating and organizing the spaces, so that there is almost no distinction between furniture and structure, as it is possible to observe in the ancient sources of different periods (Herodotus, Euripides, Julius Caesar, Plutarchus, Athenaeus: the pavilions of Xerxes at Plataia, of Ion at Delphi, of Alexander after the Issa battle and at Susa, of Pompey at Pharsalos, as well as the Ptolomaeus's canopy at Alexandria. At the same time, the furniture language is studied, signifying the power and the force of the sovereign through the luxurious materials and surprising the spectators.      At the end, some hypotheses on the final destination of the furniture, after dismantling the Ptolomaeus' canopy, equiped for one year.

  17. Audit Sistem Informasi Akuntansi Siklus Pengeluaran pada PT. Lagio Furniture

    Directory of Open Access Journals (Sweden)

    Aries Wicaksono

    2014-11-01

    Full Text Available Rapid technological developments make the whole thing easier. Many companies also take advantage of these technological developments. Similarly, the corporate accounting system that uses the benefits of information technology in the form of Accounting Information Systems (AIS. PT. Lagio Furniture is amanufacturing company that produces furniture for the premium class. Information system is an important part that helps the company's operations become more effective and efficient, therefore it is important for information systems running properly.This research aimed to audit the general control and applications control on the expenditure cycle accounting information system at PT. Lagio Furniture. This type of audit is audit around the computer. And then also collecting data through observation and interviews with relevant parties. Results of thereserarch is the expenditure cycle accounting information system at PT. Lagio Furniture was good. But there is still need to be improved in the control plan security, operational management control, and control inputs.

  18. Preliminary studies of Brazilian wood using different radioisotopic sources

    International Nuclear Information System (INIS)

    Carvalho, Gilberto; Silva, Leonardo Gondim de Andrade e

    2013-01-01

    Due to availability and particular features, wood was one of the first materials used by mankind with a wide variety of applications. It can be used as raw material for paper and cellulose manufacturing; in industries such as chemical, naval, furniture, sports goods, toys, and musical instrument; in building construction and in the distribution of electric energy. Wood has been widely researched; therefore, wood researchers know that several aspects such as temperature, latitude, longitude, altitude, sunlight, soil, and rainfall index interfere with the growth of trees. This behavior explains why average physical-chemical properties are important when wood is studied. The majority of researchers consider density to be the most important wood property because of its straight relationship with the physical and mechanical properties of wood. There are three types of wood density: basic, apparent and green. The apparent density was used here at 12% of moisture content. In this study, four different types of wood were used: 'freijo', 'jequetiba', 'muiracatiara' and 'ipe'. For wood density determination by non-conventional method, Am-241, Ba-133 and Cs-137 radioisotopic sources; a NaI scintillation detector and a counter were used. The results demonstrated this technique to be quick and accurate. By considering the nuclear parameters obtained as half value layers and linear absorption coefficients, Cs-137 radioisotopic source demonstrated to be the best option to be used for inspection of the physical integrity of electric wooden poles and live trees for future works. (author)

  19. Intensity of rivalry in Czech furniture production industry

    OpenAIRE

    Lucie Špačková; Pavel Žufan

    2012-01-01

    The paper focuses on furniture production industry in the Czech Republic and evaluates the influence of competition forces within this industry. These forces have a direct impact on success of competitive strategies of the firms. Furniture production industry is a typical branch occupied by numerous small and medium-sized firms. Small firms aim on satisfying domestic (or rather local) demand, medium-sized and big firms are much more aiming on exports. The methodical sources for evaluation of ...

  20. Audit Sistem Informasi Akuntansi Siklus Pengeluaran pada PT. Lagio Furniture

    OpenAIRE

    Wicaksono, Aries

    2014-01-01

    Rapid technological developments make the whole thing easier. Many companies also take advantage of these technological developments. Similarly, the corporate accounting system that uses the benefits of information technology in the form of Accounting Information Systems (AIS). PT. Lagio Furniture is amanufacturing company that produces furniture for the premium class. Information system is an important part that helps the company's operations become more effective and efficient, therefore it...

  1. The Investigation of Soft Furniture Upholstery Deformational Behaviour

    OpenAIRE

    Donata ZUBAUSKIENE; Eugenija STRAZDIENE; Virginijus URBELIS; Virginija SACEVICIENE

    2012-01-01

    Textile materials, which are different in fibre content, weave type, density and thickness, as well as multi-layered synthetic leathers, are used in soft furniture upholstery production. Deformation - relaxation behaviour, which depends on mechanical properties of such materials differs significantly, also. From this standpoint substantial problem exists in soft furniture production, because the dimensions of its upholstery patterns, i.e. initial pretention must be adjusted taking into accoun...

  2. A comparative study of three different kinds of school furniture.

    Science.gov (United States)

    Aagaard, Jens; Storr-Paulsen, Annette

    1995-05-01

    Several studies indicate that the ISO standards for school furniture seem to be inappropriate, and there is increasing evidence that the inclination of the seat should be forward and that it should be possible to adjust the table-top to a certain non-horizontal angle. However, these studies have predominantly used objective measurement methods on adult subjects for short-term experiments in rather artificial surroundings. By means of structured interviews registering the school children's perception of ergonomic comfort, the present study has compared three types of school furniture-the original ISO-standard type, and two different new types characterized by forward slanting seats and tiltable desk-tops, the main difference between the two being approximately 15 cm in the height of the chair as well as the table. The study showed that the highest of the two tilting types was perceived to be significantly better than the two others in terms of table height, chair height, reading position, back-rest, and global assessment. Likewise, the feature of a tiltable table-top was considered overwhelmingly positive independently of the height of the furniture. It is recommended that school authorities, producers of school furniture, and relevant medical personnel consider these results for alternative designs of school furniture. It should be kept in mind, however, that school furniture is only one among many factors in the multifactorial field of the back health of school children.

  3. Wood preservation

    Science.gov (United States)

    Kevin Archer; Stan Lebow

    2006-01-01

    Wood preservation can be interpreted to mean protection from fire, chemical degradation, mechanical wear, weathering, as well as biological attack. In this chapter, the term preservation is applied more restrictively to protection from biological hazards.

  4. Comparative study on liquefaction of creosote and chromated copper arsenate (CCA)-treated wood and untreated southern pine wood: effects of acid catalyst content, liquefaction time, temperature, and phenol to wood ratio

    Science.gov (United States)

    Hui Pan; Chung-Yun Hse; Todd F. Shupe

    2009-01-01

    Creosote- and chromated copper arsenate (CCA)-treated wood waste and untreated southern pine wood were liquefied with phenol and sulfuric acid. The effects of sulfuric acid content, liquefaction time, liquefaction temperature, and phenol to wood ratio on liquefaction rate (i.e., wood residue content) were investigated and analyzed by analysis of variance (...

  5. About the gasification of untreated scrap and waste wood in fluidized bed reactor for use in decentralized gas engine-cogeneration plants; Zur Vergasung von Rest- und Abfallholz in Wirbelschichtreaktoren fuer dezentrale Energieversorgungsanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Tepper, H.

    2005-10-20

    This dissertation examines the thermochemical conversion (gasification) of untreated scrap and waste wood in combustible gases for use in decentralized gas engine-cogeneration plants of low output (1 to 10 MW fuel power). A general section goes into the basics of the energetic utilization of solid biomass, the subprocesses of thermochemical conversion being described in more detail. Special attention is given to the processes and state of the art of biomass gasification in decentralized plants. A theoretical section analyzes the gasification models for solid biomass presented in the literature. Based on this analysis, a simplified kinetic model is derived for the gasification of untreated scrap and waste wood with air in bubbling fluidized bed reactors. It includes a fluid mechanic analysis of the fluidized bed based on HILLIGARDT, an empirical pyrolysis model and a global kinetic approach to the main chemical reaction taken from the literature. An experimental section describes the tests of the gasification of forest scrap wood in a semi-industrial fluidized bed gasification test plant with 150 kW fuel power and presents the significant test results. The gasification model derived is applied to check the test plant's standard settings and compare them with measured values. Furthermore, the model is employed to explain basic reaction paths and zones and to perform concluding parameter simulations. (orig.)

  6. Wood biomass gasification in the world today

    International Nuclear Information System (INIS)

    Nikolikj, Ognjen; Perishikj, Radovan; Mikulikj, Jurica

    1999-01-01

    Today gasification technology of different kinds represents a more and more interesting option of the production of energy forms. The article describes a biomass gasification plant (waste wood) Sydkraft, Vernamo from Sweden. (Author)

  7. Wood handbook : wood as an engineering material

    Science.gov (United States)

    Robert J. Ross; Forest Products Laboratory. USDA Forest Service.

    2010-01-01

    Summarizes information on wood as an engineering material. Presents properties of wood and wood-based products of particular concern to the architect and engineer. Includes discussion of designing with wood and wood-based products along with some pertinent uses.

  8. Optimization of a furniture factory layout

    Directory of Open Access Journals (Sweden)

    Tadej Kanduč

    2015-03-01

    Full Text Available This paper deals with the problem of optimizing a factory floor layout in a Slovenian furniture factory. First, the current state of the manufacturing system is analyzed by constructing a discrete event simulation (DES model that reflects the manufacturing processes. The company produces over 10,000 different products, and their manufacturing processes include approximately 30,000 subprocesses. Therefore, manually constructing a model to include every subprocess is not feasible. To overcome this problem, a method for automated model construction was developed to construct a DES model based on a selection of manufacturing orders and relevant subprocesses. The obtained simulation model provided insight into the manufacturing processes and enable easy modification of model parameters for optimizing the manufacturing processes. Finally, the optimization problem was solved: the total distance the products had to traverse between machines was minimized by devising an optimal machine layout. With the introduction of certain simplifications, the problem was best described as a quadratic assignment problem. A novel heuristic method based on force-directed graph drawing algorithms was developed. Optimizing the floor layout resulted in a significant reduction of total travel distance for the products.

  9. Pemanfaatan Limbah Sabut Kelapa pada Perencanaan Interior dan Furniture yang Berdampak pada Pemberdayaan Masyarakat Miskin

    Directory of Open Access Journals (Sweden)

    Titi Indahyani

    2011-04-01

    Full Text Available Coconut coir is one component of coconut that could be produced and decomposed into products needed by domestic or international market. Cocofiber and cocopeat are two derived products from coconut coir which through several researches could be produced into supporting material of interior and furniture, including matrass, bed sofa, and particle board like MDF, Coconut Fiber Board (CFB. Within this research, it is hoped to distribute the information about the functions and producing materials from coconut coir waste. This is supposed to be used by the government, minor industry, designer, and public to also apply and choose environment-friendly coconus coir material and sustain as a part of sustainable design, green design, social entrepreneurship and related programs. Therefore, coconut coir waste could be valued economically and has its positive effects to society who live around the coconut tree plantation area.  

  10. Personal exposure to wood dust among workers in NekaChoob factory in 2013

    Directory of Open Access Journals (Sweden)

    Mahmoud Mohammadyan

    2014-12-01

    Full Text Available Background and Purpose: Inhalation of hardwood dust may produce a range of adverse health effects in the upper and lower respiratory system, including asthma, along with Sino-nasal cancer and nasopharyngeal cancer. This study was carried out to evaluate personal exposure to wood dust among workers in chipboard and furniture production saloons in Neka Choob factory, Iran. Materials and Methods: Gravimetric method No. 0500 recommended by National Institute for Occupational Safety and Health was used to determine the wood dust concentrations in the workers’ breathing zone. The sampling air was drawn through a polyvinyl chloride filter within the breathing zone, using a calibrated personal sampling pump. Results: The mean workers’ personal exposure to wood dust in furniture production saloon (2.87 ± 1.95 mgm-3 was higher than mean exposure of workers whom were working in chipboard saloon (0.93 ± 0.35 mgm-3. The mean workers’ exposure to wood dust for both saloons was 1.70 ± 1.53 mgm-3. Conclusion: The mean workers’ personal exposure to wood dust in Neka Choob factory was higher than Occupational Exposure Limit (OEL recommended by national (Iranian Committee for Review and Collection of OEL and European ::union:: Scientific Committee on OEL committees. All workers in furniture production saloon and three workers in chipboard saloon have a mean exposure higher than OEL.

  11. Marketing Strategy Formulation for the Introduction of Eukula Strato German Wood Finishes in Local Market of Emerging Indian Economy

    Directory of Open Access Journals (Sweden)

    Suraj Kushe Shekhar

    2013-09-01

    Full Text Available Wood finishing relates to the process of embellishing or protecting the surface of the wood. The paper aimed at formulating a marketing strategy for introducing water borne German based Wood Finishes named Eukula Strato into local market of northern Kerala, India. Multiple cross sectional descriptive research with judgmental sampling technique elicited responses from Finishers, Furniture manufacturers and Interior designers. Findings revealed that Eukula Strato had a distinct advantage when compared to any other Wood Finish that was available in the local market. Findings and suggestions were reported as per 4P’s of marketing mix. Percentage analysis, Chi square analysis etc were used to interpret the results

  12. Identifying the customer satisfaction factors in furniture market

    Directory of Open Access Journals (Sweden)

    Majid Azizi

    2017-05-01

    Full Text Available Purpose – the purpose of this research is to identify the influential factors on customer satisfaction in the Iranian furniture market in order to get acquainted with the fundamental items for planning future sales programs with the purposes of extolling competitive advantages. Design/methodology/approach – A commixture of 6 items and 31 factors were educed from interviewing with 20 experts in furniture designing and manufacturing industry. The collected data from customer need indexes in previous research were also used. Findings – results showed that such factors as economic factors weighting 0.32, product specifications weighting 0.21 and credibility weighting 0.19 were the most important indexes and price weighting 0.195, fame weighting 0.131, quality, durability and resistance weighting 0.116, paying conditions weighting 0.095, designing and decorating in virtual softwares before ordering weighting 0.074, updatedness weighting 0.064 and interaction approach with the weight of 0.42 were the most considerable influential sub-indexes on the satisfaction of the Iranian furniture market customers. Research limitations/implications – by the enhancement of competition throughout the world markets and the inevitable presence of Iran in it, the market activists’ concentration should shift towards paying comprehensive attention to desires and needs of furniture market customers. Practical implications – some important issues on planning suitable manufacturing and marketing programs in furniture market are introduce so that the activists be aware of considering the growing knowledge and awareness of end-users which increases the pressure on the manufacturer side. There are also some solutions in terms of internal and external organizational factors with regard to the complex nature of competitive environment in furniture market. Originality/value – the paper provides an examination of effective factors on customer satisfaction with a

  13. In situ polymerization of polyaniline in wood veneers.

    Science.gov (United States)

    Trey, Stacy; Jafarzadeh, Shadi; Johansson, Mats

    2012-03-01

    The present study describes the possibility to polymerize aniline within wood veneers to obtain a semi-conducting material with solid wood acting as the base template. It was determined that it is possible to synthesize the intrinsically conductive polymer (ICP) polyaniline in situ within the wood structure of Southern yellow pine veneers, combining the strength of the natural wood structure with the conductivity of the impregnated polymer. It was found that polyaniline is uniformly dispersed within the wood structure by light microscopy and FT-IR imaging. A weight percent gain in the range of 3-12 wt % was obtained with a preferential formation in the wood structure and cell wall, rather than in the lumen. The modified wood was found to be less hydrophilic with the addition of phosphate doped polyaniline as observed by equilibrium water swelling studies. While wood itself is insulating, the modified veneers had conductivities of 1 × 10(-4) to 1 × 10(-9) S cm(-1), demonstrating the ability to tune the conductivity and allowing for materials with a wide range of applications, from anti-static to charge-dispersing materials. Furthermore, the modified veneers had lower total and peak heat releases, as determined by cone calorimetry, because of the char properties of the ICP. This is of interest if these materials are to be used in building and furniture applications where flame retardance is of importance. © 2012 American Chemical Society

  14. Wood biomass use in Slovenia and new challenges for the future

    International Nuclear Information System (INIS)

    Krajnc, N.

    2005-01-01

    In the last decades, wood has been substituted by other materials in many fields of utilization (construction, furniture, energy production). In Slovenia, which is markedly wooded, the process of substituting wood as a raw material started later but has been rather intense in the last twenty years. Substitution of wood in industry and in energy production has several consequences. Among the most distinctive ones are pollution of environment because of increased utilization of fossil fuels, and low realization of cut in forests. In this article we would like to present wood biomass use in Slovenia and some actions which were taken on both micro and macro level in last few years to overcome social and economical barriers for enlarge use of wood biomass.(author)

  15. Switzerland's largest wood-pellet factory in Balsthal

    International Nuclear Information System (INIS)

    Stohler, F.

    2004-01-01

    This article describes how a small Swiss electricity utility has broken out of its traditional role in power generation and the distribution of electricity and gone into the production of wood pellets. The pellets, which are made from waste wood (sawdust) available from wood processing companies, are produced on a large scale in one of Europe's largest pellets production facilities. The boom in the use of wood pellets for heating purposes is discussed. The article discusses this unusual approach for a Swiss power utility, which also operates a wood-fired power station and is even involved in an incineration plant for household wastes. The markets being aimed for in Switzerland and in Europe are described, including modern low-energy-consumption housing projects. A further project is described that is to use waste wood available from a large wood processing facility planned in the utility's own region

  16. Waste to Energy : The Waste Incineration Directive and its Implementation in the Netherlands

    NARCIS (Netherlands)

    Duman, Murat; Boels, Luciaan

    2007-01-01

    Essent operates a coal-fired power plant, called AC-9, in Geertruidenberg. A gasifier connected to AC-9 thermally treats waste wood through gasification. The waste wood Essent used is demolition and construction wood, the so-called B-wood. The gas produced through gasification is fed into the

  17. The Investigation of Soft Furniture Upholstery Deformational Behaviour

    Directory of Open Access Journals (Sweden)

    Donata ZUBAUSKIENE

    2012-12-01

    Full Text Available Textile materials, which are different in fibre content, weave type, density and thickness, as well as multi-layered synthetic leathers, are used in soft furniture upholstery production. Deformation - relaxation behaviour, which depends on mechanical properties of such materials differs significantly, also. From this standpoint substantial problem exists in soft furniture production, because the dimensions of its upholstery patterns, i.e. initial pretention must be adjusted taking into account the differences of applied materials mechanical properties. Otherwise external view and quality of upholstery may be unacceptable due to obvious visual material excess on soft furniture surfaces, which is called pull-on ease. The aim of this investigation was to determine the dependencies between three different levels of soft furniture upholstery pre-tension and corresponding values of pull-on ease. New testing method presented in this study allows defining soft furniture upholstery deformational behaviour and its regularities in respect to the initial dimensions of upholstery patterns.DOI: http://dx.doi.org/10.5755/j01.ms.18.4.3099

  18. Anthropometric evaluation of the Creches children furniture in Turkey.

    Science.gov (United States)

    Barli, Onder; Sari, Reyhan Midilli; Elmali, Derya; Aydintan, Erkan

    2006-12-01

    The dimensions of the living and working space and buildings, the types of material and different riggings should be designed to conform to the users' anthropometric measures. The first requirement to design on ergonomic system is to measure the human being who will work and live in that system. Because of this, anthropometric measures are the most frequently used ergonomic data during the design process. In this research paper, we attempt to organize a new data base of anthropometric data to use in the design of children's equipment and furniture used in crèches. A starting point for research on the proper dimensions of creche furniture is to investigate how the dimensions of furniture reflect the body dimensions and the functional needs of the children using furniture. The anthropometric data of 3, 4 and 5 year-old-children in crèches was used. We report the results of the measurements of 18 anthropometric characteristics of children which constitute a set of basic data for the design of functional spaces and furniture.

  19. Wood chemistry symposium: from muka to lignin

    Energy Technology Data Exchange (ETDEWEB)

    MacLeod, M.

    1979-01-01

    The Canadian Wood Chemistry Symposium held during September, 1979, is reviewed. The chemical and physical explanations of delignification were debated. Problems of mechanical pulping include insufficient brightness, yellowing, and low strength relative to energy consumption. A session on chemicals, energy, and food from wood began with criteria for a viable project, which included adequate return on investment, modest capital investment requirements, identified pre-existing markets, and favorable thermodynamic balances. The pulp and paper industry should improve its methods of using bark and wood waste in direct combustion (by pre-drying wastes and improving furnace efficiency) rather than supporting oil-from-wood projects, since using a waste for fuel will free fossil fuels for uses in synthetic fibers and thermoplastics. In the area of food, there are modest successes with cellulose fiber additives to bread and snack food and single cell protein (which, though made from wastes, cannot compete with soy protein). However, making monomeric sugars from wood polysaccharides is not an efficient process, and muka, animal feed supplement from foliage, is successful only in Russia. In Canada it cannot compete with agricultural products. Alpha cellulose is a major wood chemical product. Promising uses include cellulose derived thermoplastics and lignosulphonates for secondary oil recovery. Instead of breaking wood polysaccharides and lignin into monomers and then repolymerizing them, it is possible to use the pre-built polymers; such an approach is illustrated by use of lignin in polyurethane foams, adhesives, and coatings.

  20. 77 FR 1456 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Rescission of...

    Science.gov (United States)

    2012-01-10

    ... cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables, chairs...) and that do not possess the essential character of wooden bedroom furniture in an unassembled...

  1. 75 FR 72794 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Results of Antidumping...

    Science.gov (United States)

    2010-11-26

    ... cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables, chairs... essential character of wooden bedroom furniture in an unassembled, incomplete, or unfinished form. Such...

  2. 75 FR 5952 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Results of Antidumping...

    Science.gov (United States)

    2010-02-05

    ... cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables, chairs... essential character of wooden bedroom furniture in an unassembled, incomplete, or unfinished form. Such...

  3. 76 FR 65684 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Results of Antidumping...

    Science.gov (United States)

    2011-10-24

    ... cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining... for beds) and that do not possess the essential character of wooden bedroom furniture in an...

  4. POLE-LIKE STREET FURNITURE DECOMPOSTION IN MOBILE LASER SCANNING DATA

    Directory of Open Access Journals (Sweden)

    F. Li

    2016-06-01

    Full Text Available Automatic semantic interpretation of street furniture has become a popular topic in recent years. Current studies detect street furniture as connected components of points above the street level. Street furniture classification based on properties of such components suffers from large intra class variability of shapes and cannot deal with mixed classes like traffic signs attached to light poles. In this paper, we focus on the decomposition of point clouds of pole-like street furniture. A novel street furniture decomposition method is proposed, which consists of three steps: (i acquirement of prior-knowledge, (ii pole extraction, (iii components separation. For the pole extraction, a novel global pole extraction approach is proposed to handle 3 different cases of street furniture. In the evaluation of results, which involves the decomposition of 27 different instances of street furniture, we demonstrate that our method decomposes mixed classes street furniture into poles and different components with respect to different functionalities.

  5. Pole-Like Street Furniture Decompostion in Mobile Laser Scanning Data

    Science.gov (United States)

    Li, F.; Oude Elberink, S.; Vosselman, G.

    2016-06-01

    Automatic semantic interpretation of street furniture has become a popular topic in recent years. Current studies detect street furniture as connected components of points above the street level. Street furniture classification based on properties of such components suffers from large intra class variability of shapes and cannot deal with mixed classes like traffic signs attached to light poles. In this paper, we focus on the decomposition of point clouds of pole-like street furniture. A novel street furniture decomposition method is proposed, which consists of three steps: (i) acquirement of prior-knowledge, (ii) pole extraction, (iii) components separation. For the pole extraction, a novel global pole extraction approach is proposed to handle 3 different cases of street furniture. In the evaluation of results, which involves the decomposition of 27 different instances of street furniture, we demonstrate that our method decomposes mixed classes street furniture into poles and different components with respect to different functionalities.

  6. Four Steps to Fabulous Computer Furniture.

    Science.gov (United States)

    Sturgeon, Julie

    2001-01-01

    Explores how one university saved money and avoided wasted time when buying computer desks for dorm rooms. Buying considerations discussed include how the desks were to be used, the space required, desk durability, cable friendly features, and accessory necessity. (GR)

  7. Furniture firms shuns CSL for EMS program expansion

    Energy Technology Data Exchange (ETDEWEB)

    Deans, B

    1982-05-31

    The R.B. Furniture Company's disappointment in its 10 CSL Industries Inc. energy-management systems is responsible for a decision to install Trimax Controls in the remaining 67 stores. At issue are CSL's service policy of using independent installers and service contractors as well as technical problems with the equipment, although R.B. Furniture concedes it had a 2.5-year payback, a 20% drop in electricity consumption, and generally reliable performance of the CSL system. A CSL official claims its higher equipment costs are the real reason. Interviews with CSL and R.B. Furniture Co. representatives explore the attitudes and problems of both firms. The Trimex system includes a three-year warranty. (DCK)

  8. Revision of EU Ecolabel and EU Green Public Procurement criteria for furniture products: Preliminary Report

    OpenAIRE

    DONATELLO SHANE; MOONS HANS; CORDELLA MAURO; KOWALSKA MALGORZATA AGATA; KAPS RENATA BARBARA; WOLF Oliver; HIDALGO Carme; FUENTES Natalia

    2014-01-01

    The EU is responsible for around 20% of global furniture production and the many "ecolabel schemes" of potential relevance to furniture products have been briefly reviewed. Screening of 109 publications relating to the life cycle impacts of furniture products revealed several general trends, namely that material production and processing where the dominant sources of environmental impacts associated with furniture products. A comprehensive review of the use of hazardous substances and mixture...

  9. POLE-LIKE STREET FURNITURE DECOMPOSTION IN MOBILE LASER SCANNING DATA

    OpenAIRE

    Li, F.; Oude Elberink, S.; Vosselman, G.

    2016-01-01

    Automatic semantic interpretation of street furniture has become a popular topic in recent years. Current studies detect street furniture as connected components of points above the street level. Street furniture classification based on properties of such components suffers from large intra class variability of shapes and cannot deal with mixed classes like traffic signs attached to light poles. In this paper, we focus on the decomposition of point clouds of pole-like street furniture. A nove...

  10. The Application of Industry 4.0 in Customized Furniture Manufacturing Industry

    OpenAIRE

    Wang Lin; He Jinfeng; Xu Songjie

    2017-01-01

    In the background of industrial 4.0, this paper analyzes the developmental road about customized furniture factory. Based on the concepts and features of industry 4.0, this paper analyzes the composition of the customized furniture factory, the main operation system and the operation process of the intelligent customized furniture factory. In order to achieve efficient and accurate production targets, intelligent customized furniture factory should be set up through the establishment of cyber...

  11. Recycling of wood for particle board production: accounting of greenhouse gases and global warming contributions

    DEFF Research Database (Denmark)

    Merrild, Hanna Kristina; Christensen, Thomas Højlund

    2009-01-01

    of virgin wood does not change the results radically (—665 to —125 kg CO2-equivalents tonne— 1 wood waste). However, if in addition it is assumed that the GHG emissions from combustion of wood has no global warming potential (GWP) and that the energy produced from excess wood due to recycling substitutes...

  12. Bond quality of phenol-based adhesives containing liquefied creosote-treated wood

    Science.gov (United States)

    Chung-Yun Hse; Feng Fu; Hui Pan

    2009-01-01

    Liquefaction of spent creosote-treated wood was studied to determine the technological practicability of its application in converting treated wood waste into resin adhesives. A total of 144 plywood panels were fabricated with experimental variables included 2 phenol to wood (P/W) ratios in liquefaction, 6 resin formulations (3 formaldehyde/liquefied wood (F/...

  13. 41 CFR 109-25.104 - Acquisition of office furniture and office machines.

    Science.gov (United States)

    2010-07-01

    ... furniture and office machines. 109-25.104 Section 109-25.104 Public Contracts and Property Management... furniture and office machines. DOE offices and designated contractors shall make the determination as to whether requirements can be met through the utilization of DOE owned furniture and office machines. ...

  14. 75 FR 54854 - Wooden Bedroom Furniture From the People's Republic of China: Partial Rescission of Antidumping...

    Science.gov (United States)

    2010-09-09

    ... Hospitality Product Mfg., Co., Ltd. Shanghai Kent Furniture Co., Ltd. Shanghai Season Industry & Commerce Co... International, Ltd., Super Art Furniture Co., Ltd., Artwork Metal and Plastic Co., Ltd., Jibson Industries, Ltd... Hospitality, Inc. Changshu HTC Import & Export Co., Ltd. Chuan Fa Furniture Factory Contact Co., Ltd. Decca...

  15. THE DIFFERENCE OF MACHINING PROPERTIES OF TIMO (Timonius sericeus (Desf K. Schum. And KABESAK WOOD (Acacia leucophloea (Roxb. Willd. FROM EAST NUSA TENGGARA

    Directory of Open Access Journals (Sweden)

    Heny Rianawati

    2015-09-01

    Full Text Available Machining properties is one of the parameters to determine the quality of the wood. Tests on machining properties of wood are important to know the easiness level of workmanship as raw materials of furniture industry, construction wood and other wood products. This research was aimed at determining the difference of machining properties between timo wood (Timonius sericeus (Desf K. Schum. and kabesak wood (Acacia leucophloea (Roxb. Willd. from the village of Reknamo, Kupang district, East Nusa Tenggara. Testing procedures were based on ASTM D1666 including: planning, shaping, sanding, drilling and turning. The observation of qualities of the machining were done visually by calculating the percentage of defects that arise on the surface of the samples after the machining process, then the qualities were classified into five quality classes. The results showed that the machining properties of timo wood and kabesak wood were very good and belonging to the quality of class I. The significant difference between the machining properties of both the timbers is in the sanding properties, where the average free defect of sanding timo wood is 85% while kabesak wood is 84.5%. Both timo and kabesak wood are suitable as raw material, for the variety of furniture and molding products.

  16. Sawmill "Waste"

    Science.gov (United States)

    Fred C. Simmons; Adna R. Bond

    1955-01-01

    Sawmills have the reputation of being very wasteful in converting logs and bolts into lumber and timbers. Almost everyone has seen the great heaps of sawdust and slabs that collect at sawmills. Frequently the question is asked, "Why doesn't somebody do something about this terrible waste of wood?"

  17. Flame retardants in UK furniture increase smoke toxicity more than they reduce fire growth rate.

    Science.gov (United States)

    McKenna, Sean T; Birtles, Robert; Dickens, Kathryn; Walker, Richard G; Spearpoint, Michael J; Stec, Anna A; Hull, T Richard

    2018-04-01

    This paper uses fire statistics to show the importance of fire toxicity on fire deaths and injuries, and the importance of upholstered furniture and bedding on fatalities from unwanted fires. The aim was to compare the fire hazards (fire growth and smoke toxicity) using different upholstery materials. Four compositions of sofa-bed were compared: three meeting UK Furniture Flammability Regulations (FFR), and one using materials without flame retardants intended for the mainland European market. Two of the UK sofa-beds relied on chemical flame retardants to meet the FFR, the third used natural materials and a technical weave in order to pass the test. Each composition was tested in the bench-scale cone calorimeter (ISO 5660) and burnt as a whole sofa-bed in a sofa configuration in a 3.4 × 2.25 × 2.4 m 3 test room. All of the sofas were ignited with a No. 7 wood crib; the temperatures and yields of toxic products are reported. The sofa-beds containing flame retardants burnt somewhat more slowly than the non-flame retarded EU sofa-bed, but in doing so produced significantly greater quantities of the main fire toxicants, carbon monoxide and hydrogen cyanide. Assessment of the effluents' potential to incapacitate and kill is provided showing the two UK flame retardant sofa-beds to be the most dangerous, followed by the sofa-bed made with European materials. The UK sofa-bed made only from natural materials (Cottonsafe ® ) burnt very slowly and produced very low concentrations of toxic gases. Including fire toxicity in the FFR would reduce the chemical flame retardants and improve fire safety. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

  18. Pollutant emissions of commercial and industrial wood furnaces; determination of emissions and emission reducing techniques

    International Nuclear Information System (INIS)

    Baumbach, G.; Angerer, M.

    1993-01-01

    Approximately 382.000 t of wood waste from production processes are fired in Baden-Wuerttemberg per year in 4345 furnaces with capacities of less than 1 MW (field of application of the ''1 BImSchV''). This corresponds to an energy consumption of 5600 TJ. The firings with a totally installed capacity of 594 MW are operated mainly by joiners, carpenters, in sawmills and furniture factories. Certainly there are typical differences between the diverse branches concerning the characteristics of the firings such as capacity, kind of firing, of fuel supply and heat generation. Because of lacking established emission factors, at present time the emissions of these furnaces cannot be calculated. Therefore field measurements are carried out at a representative selection of the registered installations. The emissions are measured in consideration of the usual ways of operation and the commonly used fuels. Supplementarily the compound of the emitted hydrocarbons and their dependence on completeness of the combustion as well as the compound and the grain size distribution of the particle emissions are investigated. (orig.) [de

  19. Significance of wood extractives for wood bonding.

    Science.gov (United States)

    Roffael, Edmone

    2016-02-01

    Wood contains primary extractives, which are present in all woods, and secondary extractives, which are confined in certain wood species. Extractives in wood play a major role in wood-bonding processes, as they can contribute to or determine the bonding relevant properties of wood such as acidity and wettability. Therefore, extractives play an immanent role in bonding of wood chips and wood fibres with common synthetic adhesives such as urea-formaldehyde-resins (UF-resins) and phenol-formaldehyde-resins (PF-resins). Extractives of high acidity accelerate the curing of acid curing UF-resins and decelerate bonding with alkaline hardening PF-resins. Water-soluble extractives like free sugars are detrimental for bonding of wood with cement. Polyphenolic extractives (tannins) can be used as a binder in the wood-based industry. Additionally, extractives in wood can react with formaldehyde and reduce the formaldehyde emission of wood-based panels. Moreover, some wood extractives are volatile organic compounds (VOC) and insofar also relevant to the emission of VOC from wood and wood-based panels.

  20. Customer Relationship within the Furniture Design Market : A qualitative study of how companies within the furniture design market relate to the challenges connected to customer loyalty

    OpenAIRE

    Wahlström, Marie-Louise; Bergström, Jenny

    2010-01-01

    Background: The customer relationship is becoming more important for companies within the Swedish furniture design industry due to competition for market shares. The market is getting more crammed while the interest for furniture design amongst people is increasing, therefore furniture design companies need to find effective ways to attract loyal customers. Research has been made to show the importance of collaboration between companies and this is something that can increase the market share...

  1. Manufacturers-Retailers: The New Actor in the U.S. Furniture Industry. Characteristics and Implications for the Chinese Furniture Industry

    OpenAIRE

    Lidia Martínez Murillo

    2007-01-01

    Since the 1990s the American furniture industry faces a transition period. Manufacturers, one of its most important actors made its entrance into the retail industry. This shift has had deep consequences not only for the American furniture industry as a whole, but also for other international furniture industries, especially the Chinese. The present work aims to analyze this actor based on the distinction provided by the Global Commodity Chain Theory. It stresses its characteristics, structur...

  2. Discover the benefits of residential wood heating

    International Nuclear Information System (INIS)

    2003-01-01

    This publication described how residential wood-heating systems are being used to reduce energy costs and increase home comfort. Biomass energy refers to all forms are renewable energy that is derived from plant materials. The source of fuel may include sawmills, woodworking shops, forest operations and farms. The combustion of biomass is also considered to be carbon dioxide neutral, and is not considered to be a major producer of greenhouse gases (GHG) linked to global climate change. Wood burning does, however, release air pollutants, particularly if they are incompletely burned. Incomplete combustion of wood results in dense smoke consisting of toxic gases. Natural Resources Canada helped create new safety standards and the development of the Wood Energy Technical Training Program to ensure that all types of wood-burning appliances are installed correctly and safely to reduce the risk of fire and for effective wood heating. In Canada, more than 3 million families heat with wood as a primary or secondary heating source in homes and cottages. Wood heating offers security from energy price fluctuations and electrical power failures. This paper described the benefits of fireplace inserts that can transform old fireplaces into modern heating systems. It also demonstrated how an add-on wood furnace can be installed next to oil furnaces to convert an oil-only heating system to a wood-oil combination system, thereby saving thousands of dollars in heating costs. Wood pellet stoves are another wood burning option. The fuel for the stoves is produced from dried, finely ground wood waste that is compressed into hard pellets that are loaded into a hopper. The stove can run automatically for up to 24 hours. New high-efficiency advanced fireplaces also offer an alternative heating system that can reduce heating costs while preserving Canada's limited supply of fossil fuels such as oil and gas. 13 figs

  3. Sustainable Furniture that Grows with End-Users

    NARCIS (Netherlands)

    Bosch, T.; Verploegen, K.; Grösser, S.N.; Rhijn, G. van

    2017-01-01

    Economically and environmentally it might be more responsible or even feasible to combine products and services to elongate product lifetime. Gispen, a major office furniture producer in the Netherlands, has embraced circular economic principles to create new business, extend product life time and

  4. 46 CFR 169.323 - Furniture and furnishings.

    Science.gov (United States)

    2010-10-01

    ... of fire resistant materials. (b) Existing solid wooden furniture may be retained on existing vessels. (c) Draperies must be fabricated of fire resistant fabrics. (d) Rugs and carpets must be of wool or other material having equivalent fire resistant qualities. (e) Trash receptacles must be constructed of...

  5. Prevent Tipping Furniture from Injuring or Killing Young Children

    Science.gov (United States)

    ... more upsetting than the sudden death of a child — killed by a piece of a furniture, appliance or a television falling on them. “It can happen in a ... be secured. Check with home improvement stores or child retail stores and ask experts what they ... television and computer equipment low to the ground. Do ...

  6. Macroergonomic analysis of an assembly sector of a furniture company.

    Science.gov (United States)

    Cristiane, A A Z; Danielle, M D; Vanessa, C B

    2012-01-01

    From of Macroergonomic Analysis of Work were diagnosed the main ergonomics demands in a furniture company in the city of Cambé, Paraná. Through this method we could identify the most problematic points of the analyzed environment for posterior solutions of improvement with the objective of increasing the working and psychological quality of the employees, motivating their good performance and satisfaction.

  7. College and Community in Partnership: The Furniture College at Letterfrack.

    Science.gov (United States)

    Rosenfeld, Stuart A.

    2001-01-01

    A community economic development organization in rural Ireland partnered with a technical college to build a college to teach furniture design and manufacturing, with an emphasis on entrepreneurship and new production technologies. The college has been successful in attracting good students and helping them find employment. A research and…

  8. Assessment of office furniture and knowledge of work ergonomics ...

    African Journals Online (AJOL)

    Background: Poor posture when maintained for a long period can result in musculoskeletal injuries and deformities. Aims: This study aimed at investigating the knowledge of work ergonomics among bank workers, and the ergonomic compliance of office furniture used in some banks, in Enugu metropolis. Methods: This is a ...

  9. Ergonomic Based Design and Survey of Elementary School Furniture

    Science.gov (United States)

    Maheshwar; Jawalkar, Chandrashekhar S.

    2014-01-01

    This paper presents the ergonomic aspects in designing and prototyping of desks cum chairs used in elementary schools. The procedures adopted for the assessment included: the study of existing school furniture, design analysis and development of prototypes. The design approach proposed a series of adjustable desks and chairs developed in terms of…

  10. Gathering structured reflection in the furniture business by Trend Mapping

    DEFF Research Database (Denmark)

    Frei, Andrea Erika; Eriksen, Kaare Riise

    2015-01-01

    Setting up the direction for new product designs in the furniture business can be more or less structured and in many situations the idea for new design concepts, constructions, details, coloring or choice of material are directed by random input from retailers or external designers or from...

  11. Risks for respiratory and gastric cancer in wood-working occupations in Denmark.

    Science.gov (United States)

    Olsen, J H; Møller, H; Jensen, O M

    1988-01-01

    Cases of cancer notified to the Danish Cancer Registry during the period 1970 to 1984 in the age groups 16 to 66 years have been linked to information on employment kept on file in the nationwide Supplementary Pension Fund since 1964. Industrial hygienists classified industrial groups as defined by the Pension Fund with regard to exposure to wood dust, and a list of industries with major exposure to wood dust was defined. The risk for cancer of the respiratory system and the gastrointestinal tract was evaluated by means of a proportional cancer incidence analysis. A fourfold increase in risk for sinonasal cancer was found among men involved in the manufacture of wooden furniture, and a twofold increase in risk for gastric cancer was seen in all of the component industries of basic wood-processing. In contrast, no excess of gastric cancer could be detected in men working in the manufacture of wooden building materials and wooden furniture, and a risk below unity was seen for those in carpentry and joinery. The elevated risk for gastric cancer in some wood-processing industries is probably due to social factors also common to men in agriculture and manufacturing. The absence of an increased risk for gastric cancer in trades in which a high risk for sinonasal cancer is seen indicates that wood dust is not of aetiological importance for gastric cancer. No excess of total lung cancer or of the adenocarcinoma subtype was seen in any of the wood-processing industries.

  12. Wood-energy - The sector get worried

    International Nuclear Information System (INIS)

    Mary, Olivier; Signoret, Stephane; Bohlinger, Philippe; Guilhem, Jean; De Santis, Audrey; Sredojevic, Alexandre; Defaye, Serge; Maindrault, Marc

    2017-01-01

    Wood energy is, today and certainly also tomorrow, one of the most important renewable energies in France. However, the wood-energy sector seems to slow down as hydrocarbon prices stay extremely low. This document presents 8 articles, describing the context and the characteristics of this evolution, plus some examples of developments in France. The themes of the articles are: the activity of the wood-energy sector should be reinforced to meet the objectives of the French energy multi-year plan; The 2035 prospective of the wood yield in the French forest will meet the future demand, however this evaluation does not take into consideration the effects of the climatic change; the conversion to biomass of the 'Fort de l'Est' (near Paris) heating system (equipped with a boiling fluidized bed boiler) has enabled the heat network to beat the 50 pc share of renewable energy; wood-energy professionals use the 'quality' lever to challenge their fossil fuel competitors; the city of Orleans is now equipped with an innovative biomass cogeneration plant; the example of wood waste valorization in a French sawmill; the French ONF (Forest Administration) Wood-Energy actor has just inaugurated its largest biomass dryer, in order to develop the domestic market for wood as a fuel; analysis of the technical and economical feasibility of using wood to generate electric power or replacing electric space heating by heat network

  13. Equipment for biomass. Wood burners; Materiels pour la biomasse, les chaudieres bois

    Energy Technology Data Exchange (ETDEWEB)

    Chieze, B. [SA Compte R., 63 - Arlanc (France)

    1997-12-31

    A review of the French classification of biomass wastes (and more especially wood and wood wastes) concerning classified burning equipment, is presented: special authorization is thus needed for burning residues from wood second transformation processes. Limits for combustion product emission levels are detailed and their impact on wood burning and process equipment is examined: feeder, combustion chamber, exchanger, fume treatment device, residue disposal. Means for reducing pollutant emissions are reviewed

  14. Choosing Wood Burning Appliances

    Science.gov (United States)

    Information to assist consumers in choosing a wood burning appliance, including types of appliances, the differences between certified and non-certified appliances, and alternative wood heating options.

  15. Preliminary studies of Brazilian wood using different radioisotopic sources

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, Gilberto; Silva, Leonardo Gondim de Andrade e, E-mail: gcarval@ipen.br, E-mail: ftgasilva@gmail.com [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2013-07-01

    Due to availability and particular features, wood was one of the first materials used by mankind with a wide variety of applications. It can be used as raw material for paper and cellulose manufacturing; in industries such as chemical, naval, furniture, sports goods, toys, and musical instrument; in building construction and in the distribution of electric energy. Wood has been widely researched; therefore, wood researchers know that several aspects such as temperature, latitude, longitude, altitude, sunlight, soil, and rainfall index interfere with the growth of trees. This behavior explains why average physical-chemical properties are important when wood is studied. The majority of researchers consider density to be the most important wood property because of its straight relationship with the physical and mechanical properties of wood. There are three types of wood density: basic, apparent and green. The apparent density was used here at 12% of moisture content. In this study, four different types of wood were used: 'freijo', 'jequetiba', 'muiracatiara' and 'ipe'. For wood density determination by non-conventional method, Am-241, Ba-133 and Cs-137 radioisotopic sources; a NaI scintillation detector and a counter were used. The results demonstrated this technique to be quick and accurate. By considering the nuclear parameters obtained as half value layers and linear absorption coefficients, Cs-137 radioisotopic source demonstrated to be the best option to be used for inspection of the physical integrity of electric wooden poles and live trees for future works. (author)

  16. AN INVESTIGATION ON THE CUSTOMER RELATIONSHIP MANAGEMENT IN FURNITURE STORES

    Directory of Open Access Journals (Sweden)

    İlker Akyüz

    2004-11-01

    Full Text Available The most valuable thing for corporations is customers in today’s competitive environment. The evaluation obtained with suitable methodology is important vitally in the success of customer relationship management systems applied for the continuous customer satisfaction and devotion. Continuous customer satisfaction, development of communication skills with customers, caring with customers’ desires and compliments before and after sale just in sale time, development of the quality of services being offered to the customers is dependent on the determining customer problems closely and giving customer focused services. In this study, it was tried to reveal the customer relationship management, communication with customer, customer focused sale offered before, after and just in sale time in some furniture stores located in Trabzon. It was found that the furniture stores in Trabzon have been generally trying to give customer focused sale services

  17. Evaluation of Airborne MDF Dust Concentration in Furniture Factories

    Directory of Open Access Journals (Sweden)

    Renilson Luiz Teixeira

    2017-10-01

    Full Text Available ABSTRACT High concentrations of airborne dust are observed during the cutting of medium density fiberboard (MDF boards. This dust, at first considered just uncomfortable for workers, may be harmful to their health. The objective of this work was to evaluate the concentration of airborne dust during the cutting of medium density fiberboard (MDF. The experiment was developed in the MDF cutting sector of three furniture factories located in the city of Lavras/MG. The results showed that the mean concentrations of total dust suspended in these three furniture factories were above the tolerance limit set by the American Conference of Governmental Industrial Hygienists (ACGIH, giving evidence of a serious problem in these companies related to this type of risk agent.

  18. Recycling of wood products. Final report of the preliminary study project partly financed by the Finnish Wood Research Oy; Puutuotteiden kierraetys. Finnish Wood Research Oy:n osarahoittaman esiselvityshankkeen loppuraportti

    Energy Technology Data Exchange (ETDEWEB)

    Pirhonen, I.; Heraejaervi, H.; Saukkola, P.; Raety, T.; Verkasalo, E., Email: henrik.herajarvi@metla.fi

    2011-07-01

    The objective of this preliminary study was to clarify the present state of recycling of wood in Finland and Europe. In the work the control measures of recycling were examined. In Finland there will be a total amount of 850 000 tons of waste wood per year. Of this amount 670 000 tons is from construction and demolishing of buildings. Burning the wood to energy is technically and economically the most reasonable use of waste wood in Finland and in several other European countries where there is a long heating season. A lot of work has been done to find new ways of utilization. The objective of the European Union to increase the use of renewable natural resources in the energy production creates an additional demand to all kinds of wood, including waste wood. The waste legislation of Finland and EU is directing to recycling, not restricting it. Furthermore, the systems to try to create markets for products containing recycled materials are under development. In the future it is expected that the legislation is tightening and the burning of waste wood is no longer calculated as acceptable recycling. Other ways to utilize wood waste should then already be developed. Furthermore, the development and introduction of new recycling methods are of important significance also when marketing wood and wood products. The recycling should be taken into consideration already at the planning stage of the building

  19. Use of Augmented Reality in the furniture industry

    OpenAIRE

    Carvalho, Elizabeth, Simão; Maçães, Gustavo; Brito, Paulo; Varajão, Isabel; Sousa, Nuno

    2011-01-01

    The architects conceive the interior visual aspect of a house based on sketches and drawings. These drawing schemes are perfectly understandable by technicians that are responsible for their implementation, but to the client, most of the time, they seem somewhat unrealistic and ungraspable in terms of visual model. This issue is especially sensitive when the inner components are actually pieces of different kinds of furniture and other decoration stuff. The ideal situatio...

  20. Perancangan Modular Furniture untuk Food Truck Penjual Makanan Indonesia

    OpenAIRE

    Sherly de Yong, Chetlyne Stefany Soekanto I Gusti Ngurah Ardana

    2016-01-01

    Food and beverage industry growth in Indonesia continues to develop, and need to be traded in location with dense occupants so that the business can be profitable. This has resulted in the emergence of the mobile system, as selling methods are much in demand today. Food vendors are mobile, requiring a furniture design that can support the activity of cooking and selling on a vehicle. By using Kembel design method, through the process of understanding, compressing, processing the data using de...

  1. Analysis of school furniture used in computer classrooms

    OpenAIRE

    Jiří Tauber

    2011-01-01

    With the respect to the fast development of new computer technologies, it is unconditionally necessary that school furniture reflected this trend and adapted to it. Our use of computer technologies and utilities in teaching is increasing. Therefore, it is necessary to improve school desks so that they would be fit for new computer technology. Creation of a compact set of information relative to the issue concerned, which would comprise of needs and requirements for individual pieces of furnit...

  2. EVALUATION OF STREET FURNITURE ACCORDING TO BASIC DESIGN PRINCIPLES

    OpenAIRE

    GHORAB, Peyman; YÜCEL CAYMAZ, Gökçen Firdevs

    2014-01-01

    In the urban context, it is important to create more comfortable and livable environments with proper planning, design and application. Because aesthetic considerations are of more importance today, designing urban furniture to give a more beautiful appearance to cities is of high priority; designers and those working in related disciplines must be careful to observe these principles throughout the design process. This paper describes research conducted to review the aesthetic principles invo...

  3. The study of postural workload in assembly of furniture upholstery

    OpenAIRE

    Marek Lasota Andrzej; Hankiewicz Krzysztof

    2017-01-01

    The productivity of the workers is affected by the Work-related Musculoskeletal Disorders (WRMSDs) which common cause of health problems, sick leave and it can result in decreased quality of work and increased absenteeism. The objective of this study is to evaluate and investigate the postural workload of sewing machine operators in the assembly of upholstery in furniture factory by using the Ovako Working Posture Analysing System (OWAS) with sampling. The results indicated that posture code ...

  4. Influence of temperature, mixing and time of residue on the degradation of organic trace materials during thermal treatment of waste wood; Einfluss von Temperatur, Durchmischung und Verweilzeit auf den Abbau organischer Spurenstoffe bei der thermischen Behandlung von Abfallholz

    Energy Technology Data Exchange (ETDEWEB)

    Beckmann, M [Clausthaler Umwelttechnik-Institut GmbH (CUTEC), Clausthal-Zellerfeld (Germany); Griebel, H [Fels-Werke GmbH, Goslar (Germany); Scholz, R [Technische Univ. Clausthal, Clausthal-Zellerfeld (Germany). Inst. fuer Energieverfahrenstechnik und Brennstofftechnik

    1998-09-01

    Waste wood, e.g. window frames or sleepers treated with coal tar pitch, are usually incinerated after crushing and removal of foreign materials (glass, metal etc.). Organic trace elements, e.g. PAH, PCB, chlorobenzenes, PCDD and PCDF must be removed after combustion. (orig./SR) [Deutsch] Abfallhoelzer, wie z.B. Fensterrahmen oder mit Steinkohlenteerpech behandelte Eisenbahnschwellen, werden nach Zerkleinerung und Abtrennung von Wert- und Stoerstoffen (Glas, Metalle usw.) haeufig in Rostsystemen thermisch behandelt. Bei der Diskussion der Prozessbedingungen liegt ein besonderer Schwerpunkt in der Fragestellung nach geeigneten Abbaubedingungen fuer organische Spurenstoffe wie polyaromatische Kohlenwasserstoffe (PAK), polychlorierte Biphenyle (PCB), Chlorbenzole, polychlorierte Dibenzodioxine (PCDD) und polychlorierte Dibenzofurane (PCDF) im Nachverbrennungsprozess. (orig./SR)

  5. Intensity of rivalry in Czech furniture production industry

    Directory of Open Access Journals (Sweden)

    Lucie Špačková

    2012-01-01

    Full Text Available The paper focuses on furniture production industry in the Czech Republic and evaluates the influence of competition forces within this industry. These forces have a direct impact on success of competitive strategies of the firms. Furniture production industry is a typical branch occupied by numerous small and medium-sized firms. Small firms aim on satisfying domestic (or rather local demand, medium-sized and big firms are much more aiming on exports. The methodical sources for evaluation of rivalry represent particular influences defined by Porter in his model of five competitive forces. Main influences identified by Porter, which are increasing the intensity of competition in the furniture production industry in the Czech Republic include low industry concentration, relatively low diversity of competitors, decline in sales, low (or none switching costs, and existing excessive capacity within the industry. Further development will be most significantly influenced by a growing concentration of the bigger Czech producers on domestic market and overall economic development.

  6. Development of an ergonomics guideline for the furniture manufacturing industry.

    Science.gov (United States)

    Mirka, Gary A

    2005-03-01

    Industry-specific ergonomics guidelines are an important component in the four-pronged approach to workplace ergonomics currently pursued by the United States Occupational Safety and Health Administration. The American Furniture Manufacturers Association has taken the initiative of developing such a guideline for its members. The result of this effort is the "AFMA Voluntary Ergonomics Guideline for the Furniture Manufacturing Industry", a document that includes basic information about ergonomics program components as well as a compilation of work-proven, ergonomics best practices as submitted by members of the furniture manufacturing community. This guideline was developed through an industry-research-government partnership and made strategic use of the unique attributes that each sector brought to this effort. Outlined in this paper are some of the characteristics of this partnership including, the roles played by each, the different motivations for pursuing the guideline, the challenges faced during the development of the document, the successes experienced in this process, as well as a proposed outline for measuring the effectiveness of this effort. The hope is that this summary, and some of the lessons learned contained herein, would be helpful to others considering the prospect of developing such a guideline for their industry.

  7. Analisis Praktik Corporate Social Responsibility Perusahaan Furniture di Kabupaten Jepara

    Directory of Open Access Journals (Sweden)

    Aida Nahar

    2015-12-01

    Full Text Available Corporate social responsibility (CSR is a transparent business practices, which are based on ethical values, with particular attention to employees, communities and the environment, and designed to meet the wishes of the shareholders and the public in general. Effort to understand and analyze the practice of CSR in a company is interesting, considering the practice of CSR is not a uniform practice and its implementation is highly dependent on the unique characteristics inherent in the company. The purpose of this study is to investigate to find out the practice of Corporate Social Responsibility by furniture companies in Jepara. Data collection methods used in this study were interviews, direct observation, and analysis of company documents. Data were analyzed by triangulation and interpretation. From the research conducted it can be concluded that the comapany’s motivation in implementing CSR undertaken by the company from Jepara regency furniture is the company’s commitment and enhance the reputation of the company. While the practice of CSR that have been made furniture enterprises in Jepara regency consists of several fields, namely a. economy, including internal and external sectors. Internal sector is focused on training programs for employees. The external sector was focused on facilitating the community development patterns, community groups, and cooperatives. b. Social areas, including the provision of public facilities (infrastructure development, social welfare, education and sports. c. Environment areas, including sustainable water supply.

  8. Other Special Waste

    DEFF Research Database (Denmark)

    Brogaard, Line Kai-Sørensen; Christensen, Thomas Højlund

    2011-01-01

    In addition to the main types of special waste related to municipal solid waste (MSW) mentioned in the previous chapters (health care risk waste, WEEE, impregnated wood, hazardous waste) a range of other fractions of waste have in some countries been defined as special waste that must be handled...... separately from MSW. Some of these other special wastes are briefly described in this chapter with respect to their definition, quantity and composition, and management options. The special wastes mentioned here are batteries, tires, polyvinylchloride (PVC) and food waste....

  9. Finishing of wood

    Science.gov (United States)

    R. Sam Williams

    1999-01-01

    The primary function of any wood finish (paint, varnish, and stain, for example) is to protect the wood surface, help maintain a certain appearance, and provide a cleanable surface. Although wood can be used both outdoors and indoors without finishing, unfinished wood surfaces exposed to the weather change color, are roughened by photodegradation and surface checking,...

  10. 40 CFR 60.3065 - What must I do if I plan to permanently close my air curtain incinerator that burns only wood...

    Science.gov (United States)

    2010-07-01

    ... close my air curtain incinerator that burns only wood waste, clean lumber, and yard waste and not... Compliance Times for Other Solid Waste Incineration Units That Commenced Construction On or Before December 9, 2004 Model Rule-Air Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60...

  11. Wastes

    International Nuclear Information System (INIS)

    Bovard, Pierre

    The origin of the wastes (power stations, reprocessing, fission products) is determined and the control ensuring the innocuity with respect to man, public acceptance, availability, economics and cost are examined [fr

  12. Supply chain improvements through clustering: Relationships and competitive collaboration in the Norwegian furniture industry

    OpenAIRE

    Lindholm, Jorunn; Rødstøl, Anna With

    2015-01-01

    Master's thesis in Firm management There is an on-going debate regarding what Norway will do when the country can no longer rely as heavily on the oil as a source of wealth and prosperity. As there is a tradition for designing and making furniture in Norway, and the furniture industry is not dependent on favourable natural conditions, this industry could represent an alternative. As the Norwegian furniture manufacturing companies are producing in one world’s most high waged countries, ...

  13. The Influence of Furniture on Air Velocity in a Room:an isothermal case

    OpenAIRE

    Nielsen, J. R.; Nielsen, Peter V.; Svidt, Kjeld

    1998-01-01

    Using isothermal full-scale experiments and 3-dimensional CFD simulations it is investigated how normal office furniture influences the air movements in a mixing ventilated room.Two different types of inlets are used in the experiments and a set-up with normal office furniture is made. The set-up is simulated with one of the inlets where a volume resistance represents the furniture.

  14. A REVIEW OF OIL PALM BIOCOMPOSITES FOR FURNITURE DESIGN AND APPLICATIONS: POTENTIAL AND CHALLENGES

    OpenAIRE

    Siti Suhaily,; Mohammad Jawaid,; H. P. S. Abdul Khalil,; A. Rahman Mohamed; , F. Ibrahim

    2012-01-01

    This review considers the potential and challenges of using agro-based oil palm biomasses, including the trunk, frond, empty fruit bunch, and palm press fiber biocomposites, for furniture applications. Currently, design and quality rather than price are becoming the primary concern for consumers when buying new furniture. Within this context, this paper focuses on the design of innovative, sustainable furniture from agro-based biocomposites to meet the needs of future population growth and te...

  15. Consumer perceptions of children’s furniture in Shanghai and Shenzhen, China

    OpenAIRE

    Chen, Jiao

    2013-01-01

    China’s high-speed economic growth has accelerated consumers’ disposable income evidently. With the improvement of living standards, people have increasingly been concerned about their life quality, especially when buying consumables like food, toys and clothing as well as durable commodities like furniture for their children. In the past ten years, the Chinese children's furniture market has developed rapidly, making up 9% of total furniture market. However, no studies concerning the analysi...

  16. Who's Counting Dead Wood ?

    OpenAIRE

    Woodall, C. W.; Verkerk, H.; Rondeux, Jacques; Ståhl, G.

    2009-01-01

    Dead wood in forests is a critical component of biodiversity, carbon and nutrient cycles, stand structure, and fuel loadings. Until recently, very few countries have conducted systematic inventories of dead wood resources across their forest lands. This may be changing as an increasing number of countries implement dead wood inventories. A recent survey looks at the status and attributes of forest dead wood inventories in over 60 countries. About 13 percent of countries inventory dead wood gl...

  17. Street furniture concept in Pasar Buah and Bukit Gundaling Based on place identity

    Science.gov (United States)

    Ginting, Nurlisa; Vinky Rahman, N.; Delianur Nasution, Achmad; Nawawiy Loebis, M.; Sinaga, Fitri A.

    2018-03-01

    Tourism is one of the largest sources of the foreign exchange for a country, that encourage many developers to develop it. Karo District located in the province of North Sumatera, Indonesia, which has many tourist destinations with natural and cultural resources, including Pasar Buah and Bukit Gundaling. To develop Tourism, one of way is with increasing place identity in tourist destinations. Unfortunately, place identity in Pasar Buah and Bukit Gundaling are still lacking, so it needs improvement, one of that is the Street furniture in Pasar Buah and Bukit Gundaling. This study aims to design the concept of the Street furniture planning in Pasar Buah and Bukit Gundaling. The method used is a qualitative method, that is design street furniture using five groups elements of street furniture: decorative element, service furniture, trade furniture, signaling furniture, and advertisement furniture. The result of this study is the concept of the design street furniture of Pasar Buah and Bukit Gundaling, which can use to improve place identity in tourism of Karo District.

  18. The Application of Industry 4.0 in Customized Furniture Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Wang Lin

    2017-01-01

    Full Text Available In the background of industrial 4.0, this paper analyzes the developmental road about customized furniture factory. Based on the concepts and features of industry 4.0, this paper analyzes the composition of the customized furniture factory, the main operation system and the operation process of the intelligent customized furniture factory. In order to achieve efficient and accurate production targets, intelligent customized furniture factory should be set up through the establishment of cyber physical system( CPS to cover the intelligent network.

  19. Level and distribution of employee exposures to total and respirable wood dust in two Canadian sawmills.

    Science.gov (United States)

    Teschke, K; Hertzman, C; Morrison, B

    1994-03-01

    Personal respirable (N = 230) and total (N = 237) dust measurements were made in two coastal British Columbia sawmills using a sampling strategy that randomly selected workers from all jobs in the mills over two seasons. Information about job title, department, season, weather conditions, location of the job relative to wood-cutting machines, and control measures also was collected at the time of sampling. Only 16 respirable wood dust samples were above the detection limit of 0.08 mg/m3; all 16 had levels industry, but most sawmill investigations report mean wood dust concentrations lower than those measured in the furniture and cabinetmaking industries, where concerns about wood dust exposures initially were raised.

  20. Greater utilization of wood residue fuels through improved financial planning

    International Nuclear Information System (INIS)

    Billings, C.D.; Ziemke, M.C.; Stanford, R.

    1991-01-01

    Recent events have focused attention on the promotion of greater utilization of biomass fuel. Considerations include the need to reduce increases in global warming and also to improve ground level air quality by limiting the use of fossil fuels. However, despite all these important environmentally related considerations, economics remains the most important factor in the decision process used to determine the feasibility of using available renewable fuels instead of more convenient fossil fuels. In many areas of the Southeast, this decision process involves choosing between wood residue fuels such as bark, sawdust and shavings and presently plentiful natural gas. The primary candidate users of wood residue fuels are industries that use large amounts of heat and electric power and are located near centers of activity in the forest products industry such as sawmills, veneer mills and furniture factories. Given that such facilities both produce wood residues and need large amounts of heat and electricity, it is understandable that these firms are often major users of wood-fired furnaces and boilers. The authors have observed that poor or incomplete financial planning by the subject firms is a major barrier to economic utilization of inexpensive and widely available renewable fuels. In this paper, the authors suggest that wider usage of improved financial planning could double the present modest annual incidence of new commercial wood-fueled installation

  1. Transfer soil-wood of radionuclides of uranium decay series

    International Nuclear Information System (INIS)

    Deus, P.; Petschat, U.; Schmidt, P.

    1998-01-01

    The radionuclide transfer soil-plant is an essential feature for radioecological characterisation of the biosphere. Beside of plants used only for nutrition purposes also plants have to be investigated which are used otherwise intensively or over long periods by humans. This e.g. comes true in the case of wood which as timber or furniture in buildings could be the reason of radiation expositions of inhabitants. In this work by means of experimental investigations for 226 Ra, 210 Pb, 210 Po, 238 U and 227 Ac transfer factors of wood grown on areas used formerly by uranium mining are estimated. The dependence of transfer factors on specific activity in soil is determined. It is shown that in the case of higher soil activities transfer factors of wood are comparable with factors published for other vegetation. As a rule no linear dependence of plant activity on soil activity has been found. As known from other radionuclides saturations take place which result in an upper level of activity in the plants. An effective dose estimation in the case of typical applications shows as a rule no remarkable radioecological risk due to wood grown on mining areas with the exception of processes including radionuclide enrichment. In latter cases and for wood grown on areas with soil activities >1 000 Bq/kg with respect to a general radiation protection precaution duty and aspects of licence problems, however, a case-to-case decision is recommended. (orig.) [de

  2. Processing of the wood angelim pedra (Hymenolobium petraeum

    Directory of Open Access Journals (Sweden)

    Adjenane Corrêa Taques

    2016-08-01

    Full Text Available This study aimed to verify the behavior of wood Angelim stone (Hymenolobium petraeum Ducke submitted to the machining process. The study was developed in a carpentry shop in the city of Alta Floresta-MT. 36 boards with dimensions of 150 cm x 13.5 cm x 2.5 cm, length, width and thickness were randomly selected respectively for machining tests. The tests were developed according to the machinability of equipment used by the furniture industry, planing, sanding, drill and split by nail. 8 boards of wood in the stack were selected randomly to determine the moisture, according to 7190 (ABNT, 1997. The notes used for evaluation of defects resulting in the wood during the machining processes were assigned according to ASTM D 1666 (1987. It was observed that the type of angelim stone showed excellent performance in grinding tests, no scratch on the surface piece a of the burring parts and the parts free from defects, with the burning of wood. In cracking test for nail had a good performance, because it showed cracks with the insertion of the nail and planing test a regular performance, with pullout grain, surface arrepiamento and pullout chip. Wood Angelim stone responds with quality to the machining processes in planing, sanding, drill and split by nail.

  3. Manufacture of wood/plastic composites by radiation

    International Nuclear Information System (INIS)

    Iwamoto, Takeo

    1976-01-01

    The manufacture and use of wood/plastic composite (WPC) as an example of wood matrix and wood sawdust/plastic composites (SDP) as an example of plastic matrix are reviewed. The raw material for WPC are mostly vinyl monomers, particularly methyl methacrylate and styrene. The reaction in WPC polymerization is radical polymerization. Researches on the radiation sources mostly resulted in gamma-ray. Electron beam can be applied only to thin products. The future use of WPC may be for furnitures, sporting goods, decorative parts and the like. Vital study on the reduction of manufacturing costs is required, for example, the improvement of reaction and the adoption of continuous process must be considered. The raw materials for SDP are wood sawdust, vinyl monomer (mostly methyl methacrylate) and resins. Electron beam accelerators are the most preferable radiation source because of its high efficiency and safe operation. SDP shows good forming property. The most preferable use of SDP is as interior materials for prefabricated houses, for example, opening frames for bath rooms. Some combination of the technologies of wood engineering, chemical engineering and radiation engineering must be established to develop and maintain the demands. The present radiation sources are forced to grow to large scale industrially, but the establishment of radiation source technology which can be enlarged stepwise is important to keep pace with the development. (Iwakiri, K.)

  4. Symposium on extending the use of wood residue

    Energy Technology Data Exchange (ETDEWEB)

    1977-01-01

    A symposium on extending the use of wood residues was held in Geneva, Switzerland in June, 1977. These meetings were sponsored by the UN Economic Commission for Europe, Timber Committee for the purpose of sharing information and ideas on recycling wood wastes. Eight separate papers were abstracted for inclusion in the Energy Data Base.

  5. Urban wood: Fuel from landscapers and land fills

    International Nuclear Information System (INIS)

    Miles, T.R.; Miles, T.R. Jr.

    1991-01-01

    Wood recovered from urban landscaping, construction and building demolition has become an important fuel for several new power plants. Sources, composition, and requirements for fuel preparation, handling, firing and emissions control are described from experience at several plants. Urban wood waste fuels are suitable for steam and power generation if precautions are taken to process the fuel and provide uniform flow to the boiler

  6. Chromatography Of Metal Ions On Wood Cellulose Impregnated ...

    African Journals Online (AJOL)

    Adsorption chromatography of some heavy metal ions on wood cellulose of saw dust (wood waste dust) modified with hydrochloric acid, urea and thiourea was studied. Atomic absorption spectrophotometry (AAS) was used to determine the initial concentration of solutions of Zn2+, Cu2+, Ni2+, Pb2+, and Fe3+ metal ions.

  7. BIOREMEDIATION TREATABILITY STUDIES OF CONTAMINATED SOILS AT WOOD PRESERVING SITES

    Science.gov (United States)

    Bioremediationis used frequently at sites contaminated with organic hazardous chemical where releases from processing vessels and the mismanagement of reagents and generated waste have contributed to significant impairment of the environment. At wood treater sites, process reagen...

  8. Waste to Wealth: Hidden Treasures in the Oil Palm Industry

    International Nuclear Information System (INIS)

    Loh Soh Kheang; Astimar Abdul Aziz; Ravigadevi Sambathamurthi; Mohd Basri Wahid

    2010-01-01

    The palm oil industry plays an important role in the creation of waste to wealth using the abundant oil palm biomass resources generated from palm oil supply chain i.e. upstream to downstream activities. The oil palm biomass and other palm-derived waste streams available are oil palm trunks (felled), fronds (felled and pruned), shell, mesocarp fibers, empty fruit bunches (EFB), palm oil mill effluent (POME), palm kernel expelled (PKE), palm fatty acid distillates (PFAD), used frying oil (UFO), residual oil from spent bleaching earth (SBE) and glycerol. For 88.5 million tonnes of fresh fruit bunches (FFB) processed in 2008, the amount of oil palm biomass generated was more than 25 million tones (dry weight basis) with the generation of 59 million tonnes of POME from 410 palm oil mills. Oil palm biomass consists of mainly lignocellulose materials that can be potentially and fully utilized for renewable energy, wood-based products and high value-added products such as pytonutrients, phenolics, carotenes and vitamin E. Oil palm biomass can be converted to bio energy with high combustible characteristics such as briquettes, bio-oils, bio-producer gas, boiler fuel, biogas and bio ethanol. Oil palm biomass can also be made into wood-based products such as composite and furniture, pulp and paper and planting medium. The recovery of phenolics from POME as valuable antioxidants has potential drug application. Other possible applications for oil palm biomass include fine chemicals, dietary fibers, animal feed and polymers. There must be a strategic and sustainable resource management to distribute palm oil and palm biomass to maximize the use of the resources so that it can generate revenues, bring benefits to the palm oil industry and meet stringent sustainability requirements in the future. (author)

  9. 75 FR 82373 - Wooden Bedroom Furniture From the People's Republic of China: Continuation of Antidumping Duty Order

    Science.gov (United States)

    2010-12-30

    ..., filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables... for beds) and that do not possess the essential character of wooden bedroom furniture in an...

  10. 75 FR 19364 - Wooden Bedroom Furniture From the People's Republic of China: Final Results of Expedited Sunset...

    Science.gov (United States)

    2010-04-14

    ... cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining... wooden canopies for beds) and that do not possess the essential character of wooden bedroom furniture in...

  11. 76 FR 49729 - Wooden Bedroom Furniture From the People's Republic of China: Final Results and Final Rescission...

    Science.gov (United States)

    2011-08-11

    ..., computer cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as... for beds) and that do not possess the essential character of wooden bedroom furniture in an...

  12. 77 FR 51754 - Wooden Bedroom Furniture From the People's Republic of China: Final Results and Final Rescission...

    Science.gov (United States)

    2012-08-27

    ... cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables, chairs...) and that do not possess the essential character of wooden bedroom furniture in an unassembled...

  13. 75 FR 44764 - Wooden Bedroom Furniture from the People's Republic of China: Final Results of Antidumping Duty...

    Science.gov (United States)

    2010-07-29

    ... cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining... essential character of wooden bedroom furniture in an unassembled, incomplete, or unfinished form. Such...

  14. 76 FR 68138 - Wooden Bedroom Furniture From the People's Republic of China: Final Results of the 2010...

    Science.gov (United States)

    2011-11-03

    ... cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining... for beds) and that do not possess the essential character of wooden bedroom furniture in an...

  15. BASIC PROPERTIES IN RELATION TO DRYING PROPERTIES OF THREE WOOD SPECIES FROM INDONESIA

    Directory of Open Access Journals (Sweden)

    Efrida Basri

    2005-03-01

    Full Text Available The objectives of this study were to investigate basic and drying properties of three wood species from Indonesia, i.e. kuda (Lannea coromandelica Merr., waru (Hibiscus tiliaceus L. and mindi besar (Melia dubia Cav.. The basic properties include density, shrinkages, modulus of rupture (MOR, compression parallel to grain (C//, wood strength and anatomical structures. Meanwhile, the drying properties included drying time and drying defects. The initial-final temperature and humidity for each species was based on defects that resulted from high temperature drying trial. The results showed that the drying properties were significantly affected by wood anatomical structure. The initial-final drybulb temperature and wetbulb depression   for kuda wood are 50 -70ºC and 3-30ºC respectively, while the corresponding figures for waru wood are 65-80ºC and 6-30ºC, and for mindi besar wood are 55-80ºC and 4-30ºC. These drying schedules, however, still need further trial prior to their implementation in the factory-scale operation. All wood species studied have density and considerable strength recommended in their use for light medium construction purposes. Mindi besar wood has decorative appearance so it is suitable for furniture.

  16. Ergonomic suitability of kitchen furniture regarding height accessibility.

    Science.gov (United States)

    Hrovatin, Jasna; Prekrat, Silvana; Oblak, Leon; Ravnik, David

    2015-03-01

    It is possible to significantly ease kitchen chores with properly sized and appropriately arranged cupboards. In designing kitchen furniture and the optimal depth and the height of storage capacities, accessibility should be taken into consideration. It is known that the optimal storage zone is between 800 and 1100 mm and that there is reduced visibility and accessibility at the level between 1400 and 1700 mm, which is even more prominent for the elderly. This suggests that wall cabinets are not recommended for the elderly. The aim of this study was to determine to what extent kitchens manufactured by Slovenian furniture manufacturers are suitable for users of different age groups with regard to the accessibility of goods stored in the cupboards. Furthermore, based on the measurement analysis, recommendations are provided for designing kitchen furniture that would meet the needs of the elderly. The study, carried out using a computer simulation model, analyzed the products of three Slovenian kitchen manufacturers. The cross section of accessibility in the wall cabinets was determined for different age groups of men and women. The results show that the efficacy of the volume in wall cabinets higher than 600 mm, in comparison to places where objects are easily reachable, is 30% lower for women, thus indicating the inefficiency of storage space in wall cabinets. In terms of accessibility, existing kitchens are not optimal for the elderly, and a model with a deeper worktop and wall cabinets lowered onto the worktop is proposed. Accessibility in such wall cabinets is increased by up to 70% if the body is moved forward by 30°.

  17. Influence of Machine Exploitation Effectiveness on Furniture Production Quality Level

    Directory of Open Access Journals (Sweden)

    Stasiak-Betlejewska Renata

    2015-12-01

    Full Text Available One of the most important factors determining the company‘s capacity to produce high quality products is the level of machinery operation effectiveness. Companies having modern machinery are characterized by high productivity. To obtain a high quality product, the equipment should be properly used, without any failure, which contributes significantly to the exploitation level increase. The modernity level and the exploitation effectiveness level for chosen machine producing furniture components in relation to the product quality level were analysed in the paper. As a result of the research findings analysis, proposals for corrective actions with regard to machinery maintenance and production processes were presented.

  18. Removal or transport of office furniture and PCs

    CERN Multimedia

    TS Department

    2008-01-01

    The TS/FM Group wishes to remind users that requests for the removal or transport of office furniture must be made using the EDH ‘Transport request’ form. Please select the "Removals" category from the drop-down menu to indicate the nature of the request. Requests for the transport of PCs from your office to Bldg. 513 or back must also be made using the EDH ‘Transport request’ form. In this case select the "PC transport" category from the drop-down menu. TS/FM Group Tel. 160239

  19. Age trends and within-site effects in wood density and radial growth in Quercus faginea mature trees

    Directory of Open Access Journals (Sweden)

    Vicelina B. Sousa

    2016-04-01

    Full Text Available Aim of the study: This paper aims to valorize the wood of Quercus faginea Lam. for high quality end uses (e.g. furniture by studying growth and quality properties using mature trees. Age trends in tree-ring width and wood density are shown and the main factors responsible for variations in tree-ring width and wood density within and between trees are investigated. Area of study: The study site is in the center of Portugal within the natural species distribution area.Material and methods: Radial samples from ten mature trees were collected at 6 heights (from base to 9.7 m and prepared for X-ray microdensity.Main results: Wood density showed high values, ranging from 0.868 g/cm3 to 0.957 g/cm3. Wood density decreased from pith to bark and with stem height. Cambial age showed a linear relationship with wood density and most of the variation in wood is explained by age. Intra-ring and axial within-tree homogeneity was good.Research highlights: Mature trees of Q. faginea showed high wood density and a high potential for high quality end uses, comparable to other oaks. Wood density is influenced by cambial age and tree-ring width. Wood quality may be improved by tree growth rates adjustment e.g. through an adequate tree stand density (e.g. thinning operations. 

  20. Age trends and within-site effects in wood density and radial growth in Quercus faginea mature trees

    Energy Technology Data Exchange (ETDEWEB)

    Sousa, V.B.; Louzada, J.L.; Pereira, H.

    2016-07-01

    Aim of study: This paper aims to valorize the wood of Quercus faginea Lam. for high quality end uses (e.g. furniture) by studying growth and quality properties using mature trees. Age trends in tree-ring width and wood density are shown and the main factors responsible for variations in tree-ring width and wood density within and between trees are investigated. Area of study: The study site is in the center of Portugal within the natural species distribution area. Material and methods: Radial samples from ten mature trees were collected at 6 heights (from base to 9.7 m) and prepared for X-ray microdensity. Main results: Wood density showed high values, ranging from 0.868 g/cm3 to 0.957 g/cm3. Wood density decreased from pith to bark and with stem height. Cambial age showed a linear relationship with wood density and most of the variation in wood is explained by age. Intra-ring and axial within-tree homogeneity was good. Research highlights: Mature trees of Q. faginea showed high wood density and a high potential for high quality end uses, comparable to other oaks. Wood density is influenced by cambial age and tree-ring width. Wood quality may be improved by tree growth rates adjustment e.g. through an adequate tree stand density (e.g. thinning operations). (Author)

  1. Age trends and within-site effects in wood density and radial growth in Quercus faginea mature trees

    International Nuclear Information System (INIS)

    Sousa, V.B.; Louzada, J.L.; Pereira, H.

    2016-01-01

    Aim of study: This paper aims to valorize the wood of Quercus faginea Lam. for high quality end uses (e.g. furniture) by studying growth and quality properties using mature trees. Age trends in tree-ring width and wood density are shown and the main factors responsible for variations in tree-ring width and wood density within and between trees are investigated. Area of study: The study site is in the center of Portugal within the natural species distribution area. Material and methods: Radial samples from ten mature trees were collected at 6 heights (from base to 9.7 m) and prepared for X-ray microdensity. Main results: Wood density showed high values, ranging from 0.868 g/cm3 to 0.957 g/cm3. Wood density decreased from pith to bark and with stem height. Cambial age showed a linear relationship with wood density and most of the variation in wood is explained by age. Intra-ring and axial within-tree homogeneity was good. Research highlights: Mature trees of Q. faginea showed high wood density and a high potential for high quality end uses, comparable to other oaks. Wood density is influenced by cambial age and tree-ring width. Wood quality may be improved by tree growth rates adjustment e.g. through an adequate tree stand density (e.g. thinning operations). (Author)

  2. Establishing an online store in the furniture retail business : Case study of Lähdesmäki Oy

    OpenAIRE

    Kareno, Justus

    2013-01-01

    This thesis describes the process of establishing an online store for a Finnish furniture retailer. The development of electronic commerce as a means of business is introduced as the force driving furniture retailers to establish an online presence. The theory of electronic commerce is presented and analyzed in terms of differences compared to sales via a conventional store. The development of electronic furniture retailing is analyzed by researching furniture retailers in Finland and th...

  3. Characteristic and Preferences of Green Consumer Stratification As Bases to Formulating Marketing Strategies of Ecolabel-Certified Furniture

    OpenAIRE

    Ririn Wulandari; Budi Suharjo; Agus W. Soehadi; Herry Purnomo

    2012-01-01

    International furniture markets certify ecolabel has been growing, but the domestic market has not yet developed. Unfortunate, because these products have two advantages that ensure environmental sustainability and promote a furniture market. This study was expected to open and developed the domestic market for ecolabel-certified furniture. The aim of this study was to develop marketing strategies for ecolabel-certified furniture on each of green consumer stratifications. Consumer stratificat...

  4. 78 FR 17140 - Upholstered Furniture Fire Safety Technology; Meeting and Request for Comments

    Science.gov (United States)

    2013-03-20

    ... retardant (FR) chemicals, specialty fibers/fabrics without FR chemicals, inherently fire resistant materials... Furniture Fire Safety Technology; Meeting and Request for Comments AGENCY: Consumer Product Safety... Commission (CPSC, Commission, or we) is announcing its intent to hold a meeting on upholstered furniture fire...

  5. 76 FR 57713 - Wooden Bedroom Furniture From the People's Republic of China: Amended Final Results of...

    Science.gov (United States)

    2011-09-16

    ... appearance on behalf of Liberty Furniture Industries Inc. (``Liberty'') on August 17, 2011. The law firm also... Department: (1) Left out the word ``Dongguan'' when it listed the entity ``Dongguan Cambridge Furniture Co., Ltd., Glory Oceanic Co., Ltd.'' (``Cambridge'') in the rate table of the Final Results; (2) did not...

  6. Opportunities for development of local forest markets: the case of Amish furniture manufacturing

    Science.gov (United States)

    Matt Bumgardner; Gary Graham; Charles. Goebel

    2012-01-01

    A dramatic decline in the production of hardwood furniture in the United States has had profound impacts on employment and hardwood markets. Against this backdrop, the Amish-based furniture manufacturing cluster in Ohio has expanded and hardwood lumber consumption by the cluster is significant. Recent research suggests that 71 percent of firms in the cluster expanded...

  7. Educational Furniture for the 16-19 Age Group: Specification and Design. Design Note 30.

    Science.gov (United States)

    Furniture Industry Research Association, Stevenage (England).

    A 1982 British study examined the furniture needs of 16-19 year-old students. This report presented the findings on the technical and performance requirements in terms of durability and ergonomics. This report examines the furniture requirements in teaching spaces, social, refreshment and private study areas, storage requirements for pupils'…

  8. 41 CFR 101-25.104 - Acquisition of office furniture and office machines.

    Science.gov (United States)

    2010-07-01

    ... furniture and office machines. 101-25.104 Section 101-25.104 Public Contracts and Property Management... PROCUREMENT 25-GENERAL 25.1-General Policies § 101-25.104 Acquisition of office furniture and office machines... machines. The acquisition of new items shall be limited to those requirements which are considered...

  9. 78 FR 60844 - Wooden Bedroom Furniture From the People's Republic of China: Partial Rescission of Antidumping...

    Science.gov (United States)

    2013-10-02

    ... Furniture Co., Ltd. Dorbest Ltd., Rui Feng Woodwork Co., Ltd. Aka Rui Feng Woodwork (Dongguan) Co., Ltd., Rui Feng Lumber Development Co., Ltd. Aka Rui Feng Lumber Development (Shenzhen) Co., Ltd., Fine... Fung Wooden Factory, Sun Fung Co., Shin Feng Furniture Co., Ltd., Stupendous International Co., Ltd...

  10. Retouching without Touching : Creating the illusion of recoloured furniture through light projection

    NARCIS (Netherlands)

    van Adrichem, F.; van Bommel, M.; Vasques Dias, M.

    2017-01-01

    In this article an alternative method for recolouring discoloured furniture is presented. The focus is on two discoloured pieces of furniture: an Amsterdam School buffet and a Rococo marquetry commode that both have lost their bright colours due to fading (figures 1, 2). The buffet was dyed with a

  11. The Potential of Computer Controlled Optimizing Equipment in the Wooden Furniture Industry

    Science.gov (United States)

    R. Edward Thomas; Urs Buehlmann; Urs Buehlmann

    2003-01-01

    The goal of the wooden furniture industry is to convert lumber into parts by using the most efficient and cost effective processing methods. The key steps in processing lumber arc removing the regions that contain unacceptable defects or character marks and cutting the remaining areas to the widths and lengths of needed parts. Such equipment has been used in furniture...

  12. How clustering dynamics influence lumber utilization patterns in the Amish-based furniture industry in Ohio

    Science.gov (United States)

    Matthew S. Bumgardner; Gary W. Graham; P. Charles Goebel; Robert L. Romig

    2011-01-01

    Preliminary studies have suggested that the Amish-based furniture and related products manufacturing cluster located in and around Holmes County, Ohio, uses sizeable quantities of hardwood lumber. The number of firms within the cluster has grown even as the broader domestic furniture manufacturing sector has contracted. The present study was undertaken in 2008 (spring/...

  13. Creation of Wood Dust during Wood Processing: Size Analysis, Dust Separation, and Occupational Health

    Directory of Open Access Journals (Sweden)

    Eva Mračková

    2015-11-01

    Full Text Available Mechanical separators and fabric filters are being used to remove airborne fine particles generated during the processing and handling of wood. Such particles might have a harmful effect on employee health, not only in small- but also in large-scale wood processing facilities. The amount of wood dust and its dispersion conditions vary according to geometric boundary conditions. Thus, the dispersion conditions could be changed by changing the linear size of the particles. Moreover, the smaller the particles are, the more harmful they can be. It is necessary to become familiar with properties, from a health point of view, of wood dust generated from processing. Wood dust has to be sucked away from the processing area. The fractional separation efficiency of wood dust can be improved using exhaust and filtering devices. Filtration efficiency depends on moisture content, particle size, and device performance. Because of the carcinogenicity of wood dust, the concentration of wood dust in air has to be monitored regularly. Based on the results hereof, a conclusion can be made that both mechanical separators of types SEA and SEB as well as the fabric filters with FINET PES 1 textile are suitable for the separation of wet saw dust from all types of wooden waste produced within the process.

  14. Waste is a resource: A study on the opportunities in a new solid waste management in Iringa municipality

    OpenAIRE

    Solberg, Eirin

    2012-01-01

    Master i produktdesign Municipal solid waste refers to waste in a solid form, produced in the daily day life of a society such as packaging, food scrapes, grass clippings, clothing, furniture, paper, electronics and so on. It is called municipal solid waste because it is in the responsibility of the local government and comes from our homes, schools, hospitals and businesses. It is produced 108 tons municipal solid waste in Iringa each day. Iringa district is located approximately 500...

  15. Acquisition of Raman Spectrometer and High Temperature and Pressure Reactor for Synthesis and Characterization of Carbon Based Hybrid Nanoparticles from Waste Wood

    Science.gov (United States)

    2015-04-27

    biodegradable polymer blends and egg proteins The need for compostable alternative packaging materials is an urgent one, due to the continuous inevitable...surface and remain there for several years. Unlike natural polymers, most synthetic polymers cannot be decomposed by microorganisms , hence the...landfill approach becomes inefficient, and other plastics waste management should be found. A study of the biodegradation properties of synthetic

  16. Wood-plastic combination

    International Nuclear Information System (INIS)

    Schaudy, R.

    1978-02-01

    A review on wood-plastic combinations is given including the production (wood and plastic component, radiation hardening, curing), the obtained properties, present applications and prospects for the future of these materials. (author)

  17. Wood's lamp examination

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/003386.htm Wood lamp examination To use the sharing features on this page, please enable JavaScript. A Wood lamp examination is a test that uses ultraviolet ( ...

  18. Wood's lamp illumination (image)

    Science.gov (United States)

    A Wood's lamp emits ultraviolet light and can be a diagnostic aid in determining if someone has a fungal ... is an infection on the area where the Wood's lamp is illuminating, the area will fluoresce. Normally ...

  19. Robert Wood Johnson Foundation

    Science.gov (United States)

    Robert Wood Johnson Foundation Search How We Work Our Focus Areas About RWJF Search Menu How We Work Grants ... Learn more For Grantees and Grantseekers The Robert Wood Johnson Foundation funds a wide array of programs ...

  20. 75 FR 339 - Wooden Bedroom Furniture From the People's Republic of China: Rescission of Antidumping Duty New...

    Science.gov (United States)

    2010-01-05

    ... Republic of China: Rise Furniture Clarification Regarding Withdrawal of Review'' (November 24, 2009... Bedroom Furniture from the People's Republic of China: 2009 New Shipper Review of Rise Furniture Co., Ltd... From the People's Republic of China: Rescission of Antidumping Duty New Shipper Review AGENCY: Import...