WorldWideScience

Sample records for functional devices integrated

  1. Highly functional tunnelling devices integrated in 3D

    DEFF Research Database (Denmark)

    Wernersson, Lars-Erik; Lind, Erik; Lindström, Peter;

    2003-01-01

    We present a new technology for integrating tunnelling devices in three dimensions. These devices are fabricated by the combination of the growth of semiconductor heterostructures with the controlled introduction of metallic elements into an epitaxial layer by an overgrowth technique. First, we use...... circuit in order to optimize the performance of the device. In addition to the tunnelling structure below the grating, these transistors may be integrated in 3D by the introduction of another tunnelling structure directly over the metal grating. In the integrated device structure, the gate acts...... to adjust the peak voltage of certain peaks in a controlled fashion, which creates a highly functional tunnelling device. These results show the need for a strong interaction between the development of circuit models and processing technology to develop new nano-electronic devices and circuits. Copyright...

  2. Deformable devices with integrated functional nanomaterials for wearable electronics.

    Science.gov (United States)

    Kim, Jaemin; Lee, Jongsu; Son, Donghee; Choi, Moon Kee; Kim, Dae-Hyeong

    2016-01-01

    As the market and related industry for wearable electronics dramatically expands, there are continuous and strong demands for flexible and stretchable devices to be seamlessly integrated with soft and curvilinear human skin or clothes. However, the mechanical mismatch between the rigid conventional electronics and the soft human body causes many problems. Therefore, various prospective nanomaterials that possess a much lower flexural rigidity than their bulk counterparts have rapidly established themselves as promising electronic materials replacing rigid silicon and/or compound semiconductors in next-generation wearable devices. Many hybrid structures of multiple nanomaterials have been also developed to pursue both high performance and multifunctionality. Here, we provide an overview of state-of-the-art wearable devices based on one- or two-dimensional nanomaterials (e.g., carbon nanotubes, graphene, single-crystal silicon and oxide nanomembranes, organic nanomaterials and their hybrids) in combination with zero-dimensional functional nanomaterials (e.g., metal/oxide nanoparticles and quantum dots). Starting from an introduction of materials strategies, we describe device designs and the roles of individual ones in integrated systems. Detailed application examples of wearable sensors/actuators, memories, energy devices, and displays are also presented.

  3. Deformable devices with integrated functional nanomaterials for wearable electronics

    Science.gov (United States)

    Kim, Jaemin; Lee, Jongsu; Son, Donghee; Choi, Moon Kee; Kim, Dae-Hyeong

    2016-03-01

    As the market and related industry for wearable electronics dramatically expands, there are continuous and strong demands for flexible and stretchable devices to be seamlessly integrated with soft and curvilinear human skin or clothes. However, the mechanical mismatch between the rigid conventional electronics and the soft human body causes many problems. Therefore, various prospective nanomaterials that possess a much lower flexural rigidity than their bulk counterparts have rapidly established themselves as promising electronic materials replacing rigid silicon and/or compound semiconductors in next-generation wearable devices. Many hybrid structures of multiple nanomaterials have been also developed to pursue both high performance and multifunctionality. Here, we provide an overview of state-of-the-art wearable devices based on one- or two-dimensional nanomaterials (e.g., carbon nanotubes, graphene, single-crystal silicon and oxide nanomembranes, organic nanomaterials and their hybrids) in combination with zero-dimensional functional nanomaterials (e.g., metal/oxide nanoparticles and quantum dots). Starting from an introduction of materials strategies, we describe device designs and the roles of individual ones in integrated systems. Detailed application examples of wearable sensors/actuators, memories, energy devices, and displays are also presented.

  4. Integration of molecular functions into Si device for nanoscale molecular devices

    Energy Technology Data Exchange (ETDEWEB)

    Wakayama, Yutaka, E-mail: WAKAYAMA.Yutaka@nims.go.jp; Hayakawa, Ryoma

    2014-03-03

    Recent progress on nanoscale molecular devices is reviewed. The advantages of organic molecules are highlighted in terms of their unique features such as quantum effects based on their nanometer size, optical properties originating from photochromism and chemical syntheses for various structural designs. This review covers three topics: a scanning probe microscope-based evaluation of individual molecules, nano-gap electrodes for electrical current through single-molecules and the incorporation of molecular functions into Si-based devices. In particular, the importance of the incorporation of organic molecules into Si-device architecture is emphasized with a view to realizing the large-scale integration of nanoscale molecular devices. - Highlights: • Scanning probe microscope-based evaluation of individual molecules; • Nano-gap electrodes for electrical current through single-molecules; • Incorporation of molecular functions into Si-based devices.

  5. Highly functional tunnelling devices integrated in 3D

    DEFF Research Database (Denmark)

    Wernersson, Lars-Erik; Lind, Erik; Lindström, Peter

    2003-01-01

    We present a new technology for integrating tunnelling devices in three dimensions. These devices are fabricated by the combination of the growth of semiconductor heterostructures with the controlled introduction of metallic elements into an epitaxial layer by an overgrowth technique. First, we use...... circuit in order to optimize the performance of the device. In addition to the tunnelling structure below the grating, these transistors may be integrated in 3D by the introduction of another tunnelling structure directly over the metal grating. In the integrated device structure, the gate acts...... simultaneously on both tunnelling structures and the obtained characteristics are the result of the interplay between the two tunnelling structures and the gate. An equivalent circuit model is developed and we show how this interaction influences the current-voltage characteristics. The gate may be used...

  6. An integrated device with high performance multi-function generators and time-to-digital convertors

    Science.gov (United States)

    Qin, X.; Shi, Z.; Xie, Y.; Wang, L.; Rong, X.; Jia, W.; Zhang, W.; Du, J.

    2017-01-01

    A highly integrated, high performance, and re-configurable device, which is designed for the Nitrogen-Vacancy (N-V) center based quantum applications, is reported. The digital compartment of the device is fully implemented in a Field-Programmable-Gate-Array (FPGA). The digital compartment is designed to manage the multi-function digital waveform generation and the time-to-digital convertors. The device provides two arbitrary-waveform-generator channels which operate at a 1 Gsps sampling rate with a maximum bandwidth of 500 MHz. There are twelve pulse channels integrated in the device with a 50 ps time resolution in both duration and delay. The pulse channels operate with the 3.3 V transistor-transistor logic. The FPGA-based time-to-digital convertor provides a 23-ps time measurement precision. A data accumulation module, which can record the input count rate and the distributions of the time measurement, is also available. A digital-to-analog convertor board is implemented as the analog compartment, which converts the digital waveforms to analog signals with 500 MHz lowpass filters. All the input and output channels of the device are equipped with 50 Ω SubMiniature version A termination. The hardware design is modularized thus it can be easily upgraded with compatible components. The device is suitable to be applied in the quantum technologies based on the N-V centers, as well as in other quantum solid state systems, such as quantum dots, phosphorus doped in silicon, and defect spins in silicon carbide.

  7. An integrated device with high performance multi-function generators and time-to-digital convertors.

    Science.gov (United States)

    Qin, X; Shi, Z; Xie, Y; Wang, L; Rong, X; Jia, W; Zhang, W; Du, J

    2017-01-01

    A highly integrated, high performance, and re-configurable device, which is designed for the Nitrogen-Vacancy (N-V) center based quantum applications, is reported. The digital compartment of the device is fully implemented in a Field-Programmable-Gate-Array (FPGA). The digital compartment is designed to manage the multi-function digital waveform generation and the time-to-digital convertors. The device provides two arbitrary-waveform-generator channels which operate at a 1 Gsps sampling rate with a maximum bandwidth of 500 MHz. There are twelve pulse channels integrated in the device with a 50 ps time resolution in both duration and delay. The pulse channels operate with the 3.3 V transistor-transistor logic. The FPGA-based time-to-digital convertor provides a 23-ps time measurement precision. A data accumulation module, which can record the input count rate and the distributions of the time measurement, is also available. A digital-to-analog convertor board is implemented as the analog compartment, which converts the digital waveforms to analog signals with 500 MHz lowpass filters. All the input and output channels of the device are equipped with 50 Ω SubMiniature version A termination. The hardware design is modularized thus it can be easily upgraded with compatible components. The device is suitable to be applied in the quantum technologies based on the N-V centers, as well as in other quantum solid state systems, such as quantum dots, phosphorus doped in silicon, and defect spins in silicon carbide.

  8. Graphene and permalloy integration in functional fluidic and solid-state devices

    NARCIS (Netherlands)

    van den Beld, Wesley Theodorus Eduardus

    2016-01-01

    The aim of the work of this thesis is to develop novel technologies for functional micro- and nanofluidic devices, as well as exploring the functionality of first examples of such devices. The research thereby is mainly centered round graphene,and involved its synthesis, device fabrication, raman

  9. Integrated device architectures for electrochromic devices

    Energy Technology Data Exchange (ETDEWEB)

    Frey, Jonathan Mack; Berland, Brian Spencer

    2015-04-21

    This disclosure describes systems and methods for creating monolithically integrated electrochromic devices which may be a flexible electrochromic device. Monolithic integration of thin film electrochromic devices may involve the electrical interconnection of multiple individual electrochromic devices through the creation of specific structures such as conductive pathway or insulating isolation trenches.

  10. A Karaoke System with Real-Time Media Merging and Sharing Functions for a Cloud-Computing-Integrated Mobile Device

    Directory of Open Access Journals (Sweden)

    Her-Tyan Yeh

    2013-01-01

    Full Text Available Mobile devices such as personal digital assistants (PDAs, smartphones, and tablets have increased in popularity and are extremely efficient for work-related, social, and entertainment uses. Popular entertainment services have also attracted substantial attention. Thus, relevant industries have exerted considerable efforts in establishing a method by which mobile devices can be used to develop excellent and convenient entertainment services. Because cloud-computing technology is mature and possesses a strong computing processing capacity, integrating this technology into the entertainment service function in mobile devices can reduce the data load on a system and maintain mobile device performances. This study combines cloud computing with a mobile device to design a karaoke system that contains real-time media merging and sharing functions. This system enables users to download music videos (MVs from their mobile device and sing and record their singing by using the device. They can upload the recorded song to the cloud server where it is merged with real-time media. Subsequently, by employing a media streaming technology, users can store their personal MVs in their mobile device or computer and instantaneously share these videos with others on the Internet. Through this process, people can instantly watch shared videos, enjoy the leisure and entertainment effects of mobile devices, and satisfy their desire for singing.

  11. Optimized holographic femtosecond laser patterning method towards rapid integration of high-quality functional devices in microchannels

    Science.gov (United States)

    Zhang, Chenchu; Hu, Yanlei; Du, Wenqiang; Wu, Peichao; Rao, Shenglong; Cai, Ze; Lao, Zhaoxin; Xu, Bing; Ni, Jincheng; Li, Jiawen; Zhao, Gang; Wu, Dong; Chu, Jiaru; Sugioka, Koji

    2016-09-01

    Rapid integration of high-quality functional devices in microchannels is in highly demand for miniature lab-on-a-chip applications. This paper demonstrates the embellishment of existing microfluidic devices with integrated micropatterns via femtosecond laser MRAF-based holographic patterning (MHP) microfabrication, which proves two-photon polymerization (TPP) based on spatial light modulator (SLM) to be a rapid and powerful technology for chip functionalization. Optimized mixed region amplitude freedom (MRAF) algorithm has been used to generate high-quality shaped focus field. Base on the optimized parameters, a single-exposure approach is developed to fabricate 200 × 200 μm microstructure arrays in less than 240 ms. Moreover, microtraps, QR code and letters are integrated into a microdevice by the advanced method for particles capture and device identification. These results indicate that such a holographic laser embellishment of microfluidic devices is simple, flexible and easy to access, which has great potential in lab-on-a-chip applications of biological culture, chemical analyses and optofluidic devices.

  12. Integrated elastic microscope device

    Science.gov (United States)

    Lee, W. M.; Wright, D.; Watkins, R.; Cen, Zi

    2015-03-01

    The growing power of imaging and computing power of smartphones is creating the possibility of converting your smartphone into a high power pocket microscopy system. High quality miniature microscopy lenses attached to smartphone are typically made with glass or plastics that can only be produce at low cost with high volume. To revise the paradigm of microscope lenses, we devised a simple droplet lens fabrication technique that which produces low cost and high performance lens. Each lens is integrated into thin 3-D printed holder with complimentary light emitted diode (LEDs) that clips onto majority of smartphones. The integrated device converts a smartphone into a high power optical microscope/dermatoscope at around $2. This low cost device has wide application in a multitude of practical uses such as material inspection, dermascope and educational microscope.

  13. Silicon/silicon germanium heterostructures: Materials, physics, quantum functional devices and their integration with heterostructure bipolar transistors

    Science.gov (United States)

    Chung, Sung-Yong

    With the advent of the first transistor in 1947, the integrated circuit (IC) industry has rapidly expanded with the tremendous advances in the development of IC technology. The driving force in the evolution of IC technology is the reduction of transistor sizes. Without a doubt, transistor miniaturization will face fundamental physical limitations imposed by further dimensional scaling of silicon transistors in the near future. According to the 2004 International Technology Roadmap for Semiconductors (ITRS), the width of a gate electrode for complementary metal-oxide-semiconductor (CMOS) is projected to be a mere 7 nm by the end of 2018. No further solutions have been found. Since the 2001 ITRS, tunneling devices have been evaluated as an emerging technology to augment silicon CMOS. Transistor circuitry incorporating tunneling devices realized using III-V semiconductors has exhibited superior performance over its transistor-only counterparts. However, due to fundamental differences in material properties, such technology is not readily compatible with the mainstream platforms (>95% market share of semiconductors) of CMOS and HBT technologies. Recently, we demonstrated the successful monolithic integration of Si-based resonant interband tunnel diodes (RITDs) with CMOS and SiGe HBT, which makes them more attractive than III-V based tunnel diodes for system level integration. This dissertation is concerned with the development of quantum functional tunneling devices, RITDs, and high-speed transistors, HBTs, using Si/SiGe heterostructures as well as material growth and electrical properties of Si/SiGe heterostructures. Emphasis is placed on the development of Si/SiGe-based RITDs, HBTs, and their monolithic integration for 3-terminal negative differential resistance (NDR) devices. The operating principles of Si-based RITDs and the integration of RITD with HBT are also discussed.

  14. Integrated Ultrasonic-Photonic Devices

    DEFF Research Database (Denmark)

    Barretto, Elaine Cristina Saraiva

    This thesis deals with the modeling, design, fabrication and characterization of integrated ultrasonic-photonic devices, with particular focus on the use of standard semiconductor materials such as GaAs and silicon. The devices are based on the use of guided acoustic waves to modulate the light...... systems, all in search for paths to improve acousto-optic interaction. Some of the solutions proposed lead to enhancements of up to two orders of magnitude in the eciency of the device. The main aspects related to the design of the devices are discussed, including single-mode guidance, optical coupling......, integration and cost. The design proves to be robust towards fabrication and design tolerances. Several uses for this device are proposed, opening up a whole new group of applications for this class of integrated ultrasonic-photonic devices....

  15. Ensembles of indium phosphide nanowires: physical properties and functional devices integrated on non-single crystal platforms

    Energy Technology Data Exchange (ETDEWEB)

    Kobayashi, Nobuhiko P.; Lohn, Andrew; Onishi, Takehiro [University of California, Santa Cruz (United States). Baskin School of Engineering; NASA Ames Research Center, Nanostructured Energy Conversion Technology and Research (NECTAR), Advanced Studies Laboratories, Univ. of California Santa Cruz, Moffett Field, CA (United States); Mathai, Sagi; Li, Xuema; Straznicky, Joseph; Wang, Shih-Yuan; Williams, R.S. [Hewlett-Packard Laboratories, Information and Quantum Systems Laboratory, Palo Alto, CA (United States); Logeeswaran, V.J.; Islam, M.S. [University of California Davis, Electrical and Computer Engineering, Davis, CA (United States)

    2009-06-15

    A new route to grow an ensemble of indium phosphide single-crystal semiconductor nanowires is described. Unlike conventional epitaxial growth of single-crystal semiconductor films, the proposed route for growing semiconductor nanowires does not require a single-crystal semiconductor substrate. In the proposed route, instead of using single-crystal semiconductor substrates that are characterized by their long-range atomic ordering, a template layer that possesses short-range atomic ordering prepared on a non-single-crystal substrate is employed. On the template layer, epitaxial information associated with its short-range atomic ordering is available within an area that is comparable to that of a nanowire root. Thus the template layer locally provides epitaxial information required for the growth of semiconductor nanowires. In the particular demonstration described in this paper, hydrogenated silicon was used as a template layer for epitaxial growth of indium phosphide nanowires. The indium phosphide nanowires grown on the hydrogenerated silicon template layer were found to be single crystal and optically active. Simple photoconductors and pin-diodes were fabricated and tested with the view towards various optoelectronic device applications where group III-V compound semiconductors are functionally integrated onto non-single-crystal platforms. (orig.)

  16. Functional Integration

    Science.gov (United States)

    Cartier, Pierre; DeWitt-Morette, Cecile

    2010-06-01

    Acknowledgements; List symbols, conventions, and formulary; Part I. The Physical and Mathematical Environment: 1. The physical and mathematical environment; Part II. Quantum Mechanics: 2. First lesson: gaussian integrals; 3. Selected examples; 4. Semiclassical expansion: WKB; 5. Semiclassical expansion: beyond WKB; 6. Quantum dynamics: path integrals and operator formalism; Part III. Methods from Differential Geometry: 7. Symmetries; 8. Homotopy; 9. Grassmann analysis: basics; 10. Grassmann analysis: applications; 11. Volume elements, divergences, gradients; Part IV. Non-Gaussian Applications: 12. Poisson processes in physics; 13. A mathematical theory of Poisson processes; 14. First exit time: energy problems; Part V. Problems in Quantum Field Theory: 15. Renormalization 1: an introduction; 16. Renormalization 2: scaling; 17. Renormalization 3: combinatorics; 18. Volume elements in quantum field theory Bryce DeWitt; Part VI. Projects: 19. Projects; Appendix A. Forward and backward integrals: spaces of pointed paths; Appendix B. Product integrals; Appendix C. A compendium of gaussian integrals; Appendix D. Wick calculus Alexander Wurm; Appendix E. The Jacobi operator; Appendix F. Change of variables of integration; Appendix G. Analytic properties of covariances; Appendix H. Feynman's checkerboard; Bibliography; Index.

  17. 40 CFR 610.22 - Device integrity.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Device integrity. 610.22 Section 610.22 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY... § 610.22 Device integrity. The integrity of a device will be evaluated with respect to: (a) The extent...

  18. Integrated optical devices for photonics instrumentation systems

    Energy Technology Data Exchange (ETDEWEB)

    McWright, G.M.; Lafaw, D.A.; Lowry, M.; Tindall, W.

    1990-01-01

    We discuss the design, fabrication, and evaluation of high speed integrated optical devices for application to photonics instrumentation systems. Specifically, we have demonstrated integrated optical devices with bandwidths in excess of 25 GHz and implemented these devices in single-shot, streak camera based recording schemes. 5 refs., 6 figs.

  19. Medical device integration using mobile telecommunications infrastructure.

    Science.gov (United States)

    Moorman, Bridget A; Cockle, Richard A

    2013-01-01

    Financial pressures, an aging population, and a rising number of patients with chronic diseases, have encouraged the use of remote monitoring technologies. This usually entails at least one physiological parameter measurement for a clinician. Mobile telecommunication technologies lend themselves to this functionality, and in some cases, avoid some of the issues encountered with device integration. Moreover, the inherent characteristics of the mobile telecommunications infrastructure allow a coupling of business and clinical functions that were not possible before. Table I compares and contrasts some key aspect of device integration in and out of a healthcare facility. An HTM professional may be part of the team that acquires and/or manages a system using a mobile telecommunications technology. It is important for HTM professionals to ensure the data is in a standard format so that the interfaces across this system don't become brittle and break easily if one part changes. Moreover, the security and safety considerations of the system and the data should be a primary consideration in and y purchase, with attention given to the proper environmental and encryption mechanisms. Clinical engineers and other HTM professionals are unique in that they understand the patient/clinician/device interface and the need to ensure its safety and effectiveness regardless of geographical environment.

  20. Integrated Photonic Devices Incorporating Low-Loss Fluorinated Polymer Materials

    Directory of Open Access Journals (Sweden)

    Hyung-Jong Lee

    2011-06-01

    Full Text Available Low-loss polymer materials incorporating fluorinated compounds have been utilized for the investigation of various functional optical devices useful for optical communication and optical sensor systems. Since reliability issues concerning the polymer device have been resolved, polymeric waveguide devices have been gradually adopted for commercial application systems. The two most successfully commercialized polymeric integrated optic devices, variable optical attenuators and digital optical switches, are reviewed in this paper. Utilizing unique properties of optical polymers which are not available in other optical materials, novel polymeric optical devices are proposed including widely tunable external cavity lasers and integrated optical current sensors.

  1. Integrated cooling devices in silicon technology

    Science.gov (United States)

    Perret, C.; Avenas, Y.; Gillot, Ch.; Boussey, J.; Schaeffer, Ch.

    2002-05-01

    Silicon technology has become a good alternative to copper for the elaboration of efficient cooling devices required in power electronics domain. Owing to its high degree of miniaturization, it is expected to provide suitable microchannels and other inlets holes that were not achievable by copper micromachining. Besides, the use of silicon technology provides a variety of bare materials (silicon dioxide, silicon nitride, silicide, etc.) which may be either insulator or conductive, with a good or bad thermal conductivity. This large choice makes it possible to built up rather complex multilayer devices with mechanical properties good enough in comparison with hybrid copper technology heat sinks. Nevertheless, the use of silicon technology, where the microchannel width may reach few tens of microns, raises fundamental features concerning the fluid displacement within such small sections. More precisely, fundamental fluid mechanics studies have to be conducted out in order to get an accurate description of the fluid boundary layers and to provide basic data on the exchange mechanisms occurring at these surfaces. In this paper, we review the operation principles of both single- and double-phase heat exchange devices elaborated in silicon technology. Forced-convection heat sinks as well as integrated micro heat pipes are analyzed. An analytical approach is adopted to evaluate their total thermal resistances as a function of several geometrical parameters. Numerical simulations are then used in order to assess the accuracy of the analytical approach and to evaluate the impact of the fluidic aspects on the whole performance. The optimum devices are then conceived thanks to an appropriate optimization procedure taken into account the several experimental constraints. Reference values of similar copper devices are reminded and the advantages of the silicon integrated approach are highlighted.

  2. Integrated lenses in polystyrene microfluidic devices

    KAUST Repository

    Fan, Yiqiang

    2013-04-01

    This paper reports a new method for integrating microlenses into microfluidic devices for improved observation. Two demonstration microfluidic devices were provided which were fabricated using this new technique. The integrated microlenses were fabricated using a free-surface thermo-compression molding method on a polystyrene (PS) sheet which was then bonded on top of microfluidic channels as a cover plate, with the convex microlenses providing a magnified image of the channel for the easier observation of the flow in the microchannels. This approach for fabricating the integrated microlens in microfluidic devices is rapid, low cost and without the requirement of cleanroom facilities. © 2013 IEEE.

  3. Graphene: from functionalization to devices

    Science.gov (United States)

    Tejeda, Antonio; Soukiassian, Patrick G.

    2014-03-01

    The year 2014 marks the first decade of the rise of graphene. Graphene, a single atomic layer of carbon atoms in sp2 bonding configuration having a honeycomb structure, has now become a well-known and well-established material. Among some of its many outstanding fundamental properties, one can mention a very high carrier mobility, a very large spin diffusion length, unsurpassed mechanical properties as graphene is the strongest material ever measured and an exceptional thermal conductivity scaling more than one order of magnitude above that of copper. After the first years of the graphene rush, graphene growth is now well controlled using various methods like epitaxial growth on silicon carbide substrate, chemical vapour deposition (CVD) or plasma techniques on metal, insulator or semiconductor substrates. More applied research is now taking over the initial studies on graphene production. Indeed, graphene is a promising material for many advanced applications such as, but not limited to, electronic, spintronics, sensors, photonics, micro/nano-electromechanical (MEMS/NEMS) systems, super-capacitors or touch-screen technologies. In this context, this Special Issue of the Journal of Physics D: Applied Physics on graphene reviews some of the recent achievements, progress and prospects in this field. It includes a collection of seventeen invited articles covering the current status and future prospects of some selected topics of strong current interest. This Special Issue is organized in four sections. The first section is dedicated to graphene devices, and opens with an article by de Heer et al on an investigation of integrating graphene devices with silicon complementary metal-oxide-semiconductor (CMOS) technology. Then, a study by Svintsov et al proposes a lateral all-graphene tunnel field-effect transistor (FET) with a high on/off current switching ratio. Next, Tsukagoshi et al present how a band-gap opening occurs in a graphene bilayer by using a perpendicular

  4. Development of mos thyristor technological processes for functional integration of new power devices; Developpement de filieres technologiques mos-thyristor adaptees a l`integration fonctionnelle de nouveaux dispositifs de puissance

    Energy Technology Data Exchange (ETDEWEB)

    Berriane, R.

    1997-05-05

    The development of MOS thyristor technological processes for integration of the switching function for high voltage power applications in industrial supply networks, is studied. A MOS-gated optically triggered thyristor is presented, which includes a MOS gated thyristor constituting the power element and a photodiode for optical control detection; protection and control are obtained respectively by a Zener diode and a depletion MOSFET transistor. In order to verify the switching function, a model is proposed and a high voltage planar aluminium gate process technology, compatible with various bipolar and MOSFET devices associations have been developed and optimized. In the framework of industrial supply networks, the integration of a thermal protection element has been investigated. The dual thyristor function application has been also studied, composed of a spontaneously fired, controlled turn off MOS-thyristor association. The early developments of a MOS thyristor polysilicon gate process technology is then presented

  5. CARDINAL FUNCTIONS AND INTEGRAL FUNCTIONS

    OpenAIRE

    MIRCEA E. ŞELARIU; FLORENTIN SMARANDACHE; MARIAN NIŢU

    2015-01-01

    This paper presents the correspondences of the eccentric mathematics of cardinal and integral functions and centric mathematics, or ordinary mathematics. Centric functions will also be presented in the introductory section, because they are, although widely used in undulatory physics, little known.

  6. CARDINAL FUNCTIONS AND INTEGRAL FUNCTIONS

    OpenAIRE

    MIRCEA E. ŞELARIU; FLORENTIN SMARANDACHE; MARIAN NIŢU

    2015-01-01

    This paper presents the correspondences of the eccentric mathematics of cardinal and integral functions and centric mathematics, or ordinary mathematics. Centric functions will also be presented in the introductory section, because they are, although widely used in undulatory physics, little known.

  7. Using Zigbee to integrate medical devices.

    Science.gov (United States)

    Frehill, Paul; Chambers, Desmond; Rotariu, Cosmin

    2007-01-01

    Wirelessly enabling Medical Devices such as Vital Signs Monitors, Ventilators and Infusion Pumps allows central data collection. This paper discusses how data from these types of devices can be integrated into hospital systems using wireless sensor networking technology. By integrating devices you are protecting investment and opening up the possibility of networking with similar devices. In this context we present how Zigbee meets our requirements for bandwidth, power, security and mobility. We have examined the data throughputs for various medical devices, the requirement of data frequency, security of patient data and the logistics of moving patients while connected to devices. The paper describes a new tested architecture that allows this data to be seamlessly integrated into a User Interface or Healthcare Information System (HIS). The design supports the dynamic addition of new medical devices to the system that were previously unsupported by the system. To achieve this, the hardware design is kept generic and the software interface for different types of medical devices is well defined. These devices can also share the wireless resources with other types of sensors being developed in conjunction on this project such as wireless ECG (Electrocardiogram) and Pulse-Oximetry sensors.

  8. Integrals of Bessel functions

    CERN Document Server

    Luke, Yudell L

    2014-01-01

    Integrals of Bessel Functions concerns definite and indefinite integrals, the evaluation of which is necessary to numerous applied problems. A massive compendium of useful information, this volume represents a resource for applied mathematicians in many areas of academia and industry as well as an excellent text for advanced undergraduates and graduate students of mathematics.Starting with an extensive introductory chapter on basic formulas, the treatment advances to indefinite integrals, examining them in terms of Lommel and Bessel functions. Subsequent chapters explore airy functions, incomp

  9. Functional integration over geometries

    CERN Document Server

    Mottola, E

    1995-01-01

    The geometric construction of the functional integral over coset spaces {\\cal M}/{\\cal G} is reviewed. The inner product on the cotangent space of infinitesimal deformations of \\cal M defines an invariant distance and volume form, or functional integration measure on the full configuration space. Then, by a simple change of coordinates parameterizing the gauge fiber \\cal G, the functional measure on the coset space {\\cal M}/{\\cal G} is deduced. This change of integration variables leads to a Jacobian which is entirely equivalent to the Faddeev-Popov determinant of the more traditional gauge fixed approach in non-abelian gauge theory. If the general construction is applied to the case where \\cal G is the group of coordinate reparametrizations of spacetime, the continuum functional integral over geometries, {\\it i.e.} metrics modulo coordinate reparameterizations may be defined. The invariant functional integration measure is used to derive the trace anomaly and effective action for the conformal part of the me...

  10. Function integrated track system

    OpenAIRE

    Hohnecker, Eberhard

    2010-01-01

    The paper discusses a function integrated track system that focuses on the reduction of acoustic emissions from railway lines. It is shown that the combination of an embedded rail system (ERS), a sound absorbing track surface, and an integrated mini sound barrier has significant acoustic advantages compared to a standard ballast superstructure. The acoustic advantages of an embedded rail system are particularly pronounced in the case of railway bridges. Finally, it is shown that a...

  11. Fabrication and Performance of a Photonic-Microfluidic Integrated Device

    Directory of Open Access Journals (Sweden)

    Benjamin R. Watts

    2012-02-01

    Full Text Available Fabrication and performance of a functional photonic-microfluidic flow cytometer is demonstrated. The devices are fabricated on a Pyrex substrate by photolithographically patterning the microchannels and optics in a SU-8 layer that is sealed via a poly(dimethylsiloxane (PDMS layer through a unique chemical bonding method. The resulting devices eliminate the free-space excitation optics through integration of microlenses onto the chip to mimic conventional cytometry excitation. Devices with beam waists of 6 μm and 12 μm in fluorescent detection and counting tests using 2.5 and 6 μm beads-show CVs of 9%–13% and 23% for the two devices, respectively. These results are within the expectations for a conventional cytometer (5%–15% and demonstrate the ability to integrate the photonic components for excitation onto the chip and the ability to maintain the level of reliable detection.

  12. Pair Correlation Function Integrals

    DEFF Research Database (Denmark)

    Wedberg, Nils Hejle Rasmus Ingemar; O'Connell, John P.; Peters, Günther H.J.;

    2011-01-01

    numerical tests complementing previous results. Pure molecular fluids are here studied in the isothermal-isobaric ensemble with isothermal compressibilities evaluated from the total correlation function integrals and compared with values derived from volume fluctuations. For systems where the radial......We describe a method for extending radial distribution functions obtained from molecular simulations of pure and mixed molecular fluids to arbitrary distances. The method allows total correlation function integrals to be reliably calculated from simulations of relatively small systems. The long......, and J. Abildskov, Mol. Simul. 36, 1243 (2010); Fluid Phase Equilib. 302, 32 (2011)], but describe here its theoretical basis more thoroughly and derive long-distance approximations for the direct correlation functions. We describe the numerical implementation of the method in detail, and report...

  13. Integrated Functionality: Nanosensors

    Science.gov (United States)

    Devreese, Jozef T.

    2008-03-01

    Integrated nanosensors are nanostructured systems in which several sensors of different types have been integrated on a single platform including those sensitive to optical, magnetic, chemical, or biological stimuli [1,2]. Nanoparticle-based detector systems rely on the development of nanoparticles as sensing species. I discuss state-of-the-art nanosensors which are based on various advanced materials: nanoshells and nanorice, gold nanoparticles with attached fluorescent dyes, nanopores, carbon nanotubes, neuroelectronic hybrid systems, semiconductor nanocrystals and quantum-dot quantum wells (QDQW's). Phonon-assisted optical processes in semiconductor nanocrystals and QDQW's are highly sensitive to their shape and geometry i. a. due to the non-adiabaticity of the exciton-phonon systems. This sensitivity opens new perspectives for applications of quantum dots in optical sensing. For example, the simultaneous consideration of the tetrahedral shape of a CdS/HgS/CdS QDQW, interface optical phonons, and non-adiabatic phonon-assisted transitions allows for control of the photoluminescence of a QDQW [3]. Quantum-dot-based systems are also considered as examples of communication with nanodevices, which is a prerequisite of their integration. Nanosensors allow for building a new class of integrated devices, which provide the elemental base for ``intelligent sensors'' capable of data processing, storage and analysis. The development of integrated nanosensors could have many applications in several fields such as process monitoring, robotics, environmental, medical, consumer, homeland security [1] I. K. Schuller, http://nanosensors.ucsd.edu/Introduction.htm. [2] J. T. Devreese and Y. Bruynseraede, Integrated Nanosensors. McGraw-Hill 2008 Yearbook of Science & Technology, McGraw-Hill, 2008. [3] V. A. Fonoberov, E. P. Pokatilov, V. M. Fomin, and J. T. Devreese, Phys. Rev. Lett. 92, 127402 (2004).

  14. Integration a functional approach

    CERN Document Server

    Bichteler, Klaus

    1998-01-01

    This book covers Lebesgue integration and its generalizations from Daniell's point of view, modified by the use of seminorms. Integrating functions rather than measuring sets is posited as the main purpose of measure theory. From this point of view Lebesgue's integral can be had as a rather straightforward, even simplistic, extension of Riemann's integral; and its aims, definitions, and procedures can be motivated at an elementary level. The notion of measurability, for example, is suggested by Littlewood's observations rather than being conveyed authoritatively through definitions of (sigma)-algebras and good-cut-conditions, the latter of which are hard to justify and thus appear mysterious, even nettlesome, to the beginner. The approach taken provides the additional benefit of cutting the labor in half. The use of seminorms, ubiquitous in modern analysis, speeds things up even further. The book is intended for the reader who has some experience with proofs, a beginning graduate student for example. It might...

  15. III-V semiconductor devices integrated with silicon III-V semiconductor devices integrated with silicon

    Science.gov (United States)

    Hopkinson, Mark; Martin, Trevor; Smowton, Peter

    2013-09-01

    The integration of III-V semiconductor devices with silicon is one of the most topical challenges in current electronic materials research. The combination has the potential to exploit the unique optical and electronic functionality of III-V technology with the signal processing capabilities and advanced low-cost volume production techniques associated with silicon. Key industrial drivers include the use of high mobility III-V channel materials (InGaAs, InAs, InSb) to extend the performance of Si CMOS, the unification of electronics and photonics by combining photonic components (GaAs, InP) with a silicon platform for next-generation optical interconnects and the exploitation of large-area silicon substrates and high-volume Si processing capabilities to meet the challenges of low-cost production, a challenge which is particularly important for GaN-based devices in both power management and lighting applications. The diverse nature of the III-V and Si device approaches, materials technologies and the distinct differences between industrial Si and III-V processing have provided a major barrier to integration in the past. However, advances over the last decade in areas such as die transfer, wafer fusion and epitaxial growth have promoted widespread renewed interest. It is now timely to bring some of these topics together in a special issue covering a range of approaches and materials providing a snapshot of recent progress across the field. The issue opens a paper describing a strategy for the epitaxial integration of photonic devices where Kataria et al describe progress in the lateral overgrowth of InP/Si. As an alternative, Benjoucef and Reithmaier report on the potential of InAs quantum dots grown direct onto Si surfaces whilst Sandall et al describe the properties of similar InAs quantum dots as an optical modulator device. As an alternative to epitaxial integration approaches, Yokoyama et al describe a wafer bonding approach using a buried oxide concept, Corbett

  16. Integrated Solar-Energy-Harvesting and -Storage Device

    Science.gov (United States)

    whitacre, Jay; Fleurial, Jean-Pierre; Mojarradi, Mohammed; Johnson, Travis; Ryan, Margaret Amy; Bugga, Ratnakumar; West, William; Surampudi, Subbarao; Blosiu, Julian

    2004-01-01

    A modular, integrated, completely solid-state system designed to harvest and store solar energy is under development. Called the power tile, the hybrid device consists of a photovoltaic cell, a battery, a thermoelectric device, and a charge-control circuit that are heterogeneously integrated to maximize specific energy capacity and efficiency. Power tiles could be used in a variety of space and terrestrial environments and would be designed to function with maximum efficiency in the presence of anticipated temperatures, temperature gradients, and cycles of sunlight and shadow. Because they are modular in nature, one could use a single power tile or could construct an array of as many tiles as needed. If multiple tiles are used in an array, the distributed and redundant nature of the charge control and distribution hardware provides an extremely fault-tolerant system. The figure presents a schematic view of the device.

  17. Photonic Integration on the Hybrid Silicon Evanescent Device Platform

    Directory of Open Access Journals (Sweden)

    Hyundai Park

    2008-01-01

    Full Text Available This paper reviews the recent progress of hybrid silicon evanescent devices. The hybrid silicon evanescent device structure consists of III-V epitaxial layers transferred to silicon waveguides through a low-temperature wafer bonding process to achieve optical gain, absorption, and modulation efficiently on a silicon photonics platform. The low-temperature wafer bonding process enables fusion of two different material systems without degradation of material quality and is scalable to wafer-level bonding. Lasers, amplifiers, photodetectors, and modulators have been demonstrated with this hybrid structure and integration of these individual components for improved optical functionality is also presented. This approach provides a unique way to build photonic active devices on silicon and should allow application of silicon photonic integrated circuits to optical telecommunication and optical interconnects.

  18. Nonlinear Optics in Optoelectronic Integration with Some Novel Waveguide Devices.

    Science.gov (United States)

    Vakhshoori, Daryoosh

    By integration we mean realizing an integrable solution to existing discrete devices which perform some useful operation. Systems are built from these functional parts. System integration requires compatible integration of these parts. At present the most important example that also relates to our work is communication systems. For this system to work reliably, the optical pulses should be stable in time and shape (small time and amplitude jitter.) The devices that measure these properties are optical correlators. These devices are bulky, occupying a cubic foot of volume with no satisfactory integrable counterpart. Here we present an integrable waveguide correlator which experimentally measured pulses from 150fsec to 12psec with an average guide power of sub mW to 2mW in the spectral range of 1.7mum to 1.06mu m. All these measurements were performed on the same waveguide structure without mechanical movements where the spectral range was limited to the band gap of the waveguide material, GaAs in our case. The other communication scheme uses wavelength division multiplexing. Optical spectrometers are ~1 meter long devices capable of 0.1A spectral resolution. Again, like correlators, there is no satisfactory integrable counterpart. In this thesis, we present an integrable parametric waveguide spectrometer capable of measuring individual modes of semiconductor laser diodes and their movement as a function of laser current. For our experiments, the resolving power of the waveguide device was about 3A and is easily extendible to the sub A range. It should be pointed out that these spectrometer devices can also be used in stabilizing laser diode frequencies which are required for the realization of reliable wavelength division multiplexed systems. Last, but not least, a possible coherent visible surface emitting waveguide device capable of mW range powers is also presented. The motivation for this study is the ever growing market for shorter wavelength semiconductor

  19. Photonic Integrated Devices for Nonlinear Optics

    CERN Document Server

    Caspani, Lucia; Dolgaleva, Ksenia; Wagner, Sean; Ferrera, Marcello; Razzari, Luca; Pasquazi, Alessia; Peccianti, Marco; Moss, David J; Aitchison, J Stewart; Morandotti, Roberto

    2014-01-01

    We review our recent progresses on frequency conversion in integrated devices, focusing primarily on experiments based on strip-loaded and quantum-well intermixed AlGaAs waveguides, and on CMOS-compatible high-index doped silica glass waveguides. The former includes both second- and third-order interactions, demonstrating wavelength conversion by tunable difference-frequency generation over a bandwidth of more than nm, as well as broadband self-phase modulation and tunable four-wave mixing. The latter includes four-wave mixing using low-power continuous-wave light in microring resonators as well as hyper-parametric oscillation in a high quality factor resonator, towards the realization of an integrated multiple wavelength source with important applications for telecommunications, spectroscopy, and metrology.

  20. The MMI Device Ontology: Enabling Sensor Integration

    Science.gov (United States)

    Rueda, C.; Galbraith, N.; Morris, R. A.; Bermudez, L. E.; Graybeal, J.; Arko, R. A.; Mmi Device Ontology Working Group

    2010-12-01

    The Marine Metadata Interoperability (MMI) project has developed an ontology for devices to describe sensors and sensor networks. This ontology is implemented in the W3C Web Ontology Language (OWL) and provides an extensible conceptual model and controlled vocabularies for describing heterogeneous instrument types, with different data characteristics, and their attributes. It can help users populate metadata records for sensors; associate devices with their platforms, deployments, measurement capabilities and restrictions; aid in discovery of sensor data, both historic and real-time; and improve the interoperability of observational oceanographic data sets. We developed the MMI Device Ontology following a community-based approach. By building on and integrating other models and ontologies from related disciplines, we sought to facilitate semantic interoperability while avoiding duplication. Key concepts and insights from various communities, including the Open Geospatial Consortium (eg., SensorML and Observations and Measurements specifications), Semantic Web for Earth and Environmental Terminology (SWEET), and W3C Semantic Sensor Network Incubator Group, have significantly enriched the development of the ontology. Individuals ranging from instrument designers, science data producers and consumers to ontology specialists and other technologists contributed to the work. Applications of the MMI Device Ontology are underway for several community use cases. These include vessel-mounted multibeam mapping sonars for the Rolling Deck to Repository (R2R) program and description of diverse instruments on deepwater Ocean Reference Stations for the OceanSITES program. These trials involve creation of records completely describing instruments, either by individual instances or by manufacturer and model. Individual terms in the MMI Device Ontology can be referenced with their corresponding Uniform Resource Identifiers (URIs) in sensor-related metadata specifications (e

  1. Heterogeneous MEMS device assembly and integration

    Science.gov (United States)

    Topart, Patrice; Picard, Francis; Ilias, Samir; Alain, Christine; Chevalier, Claude; Fisette, Bruno; Paultre, Jacques E.; Généreux, Francis; Legros, Mathieu; Lepage, Jean-François; Laverdière, Christian; Ngo Phong, Linh; Caron, Jean-Sol; Desroches, Yan

    2014-03-01

    In recent years, smart phone applications have both raised the pressure for cost and time to market reduction, and the need for high performance MEMS devices. This trend has led the MEMS community to develop multi-die packaging of different functionalities or multi-technology (i.e. wafer) approaches to fabricate and assemble devices respectively. This paper reports on the fabrication, assembly and packaging at INO of various MEMS devices using heterogeneous assembly at chip and package-level. First, the performance of a giant (e.g. about 3 mm in diameter), electrostatically actuated beam steering mirror is presented. It can be rotated about two perpendicular axes to steer an optical beam within an angular cone of up to 60° in vector scan mode with an angular resolution of 1 mrad and a response time of 300 ms. To achieve such angular performance relative to mirror size, the microassembly was performed from sub-components fabricated from 4 different wafers. To combine infrared detection with inertial sensing, an electroplated proof mass was flip-chipped onto a 256×1 pixel uncooled bolometric FPA and released using laser ablation. In addition to the microassembly technology, performance results of packaged devices are presented. Finally, to simulate a 3072×3 pixel uncooled detector for cloud and fire imaging in mid and long-wave IR, the staggered assembly of six 512×3 pixel FPAs with a less than 50 micron pixel co-registration is reported.

  2. Integrating nanosphere lithography in device fabrication

    Science.gov (United States)

    Laurvick, Tod V.; Coutu, Ronald A.; Lake, Robert A.

    2016-03-01

    This paper discusses the integration of nanosphere lithography (NSL) with other fabrication techniques, allowing for nano-scaled features to be realized within larger microelectromechanical system (MEMS) based devices. Nanosphere self-patterning methods have been researched for over three decades, but typically not for use as a lithography process. Only recently has progress been made towards integrating many of the best practices from these publications and determining a process that yields large areas of coverage, with repeatability and enabled a process for precise placement of nanospheres relative to other features. Discussed are two of the more common self-patterning methods used in NSL (i.e. spin-coating and dip coating) as well as a more recently conceived variation of dip coating. Recent work has suggested the repeatability of any method depends on a number of variables, so to better understand how these variables affect the process a series of test vessels were developed and fabricated. Commercially available 3-D printing technology was used to incrementally alter the test vessels allowing for each variable to be investigated individually. With these deposition vessels, NSL can now be used in conjunction with other fabrication steps to integrate features otherwise unattainable through current methods, within the overall fabrication process of larger MEMS devices. Patterned regions in 1800 series photoresist with a thickness of ~700nm are used to capture regions of self-assembled nanospheres. These regions are roughly 2-5 microns in width, and are able to control the placement of 500nm polystyrene spheres by controlling where monolayer self-assembly occurs. The resulting combination of photoresist and nanospheres can then be used with traditional deposition or etch methods to utilize these fine scale features in the overall design.

  3. Integrated Multiscale Modeling of Molecular Computing Devices

    Energy Technology Data Exchange (ETDEWEB)

    Weinan E

    2012-03-29

    The main bottleneck in modeling transport in molecular devices is to develop the correct formulation of the problem and efficient algorithms for analyzing the electronic structure and dynamics using, for example, the time-dependent density functional theory. We have divided this task into several steps. The first step is to developing the right mathematical formulation and numerical algorithms for analyzing the electronic structure using density functional theory. The second step is to study time-dependent density functional theory, particularly the far-field boundary conditions. The third step is to study electronic transport in molecular devices. We are now at the end of the first step. Under DOE support, we have made subtantial progress in developing linear scaling and sub-linear scaling algorithms for electronic structure analysis. Although there has been a huge amount of effort in the past on developing linear scaling algorithms, most of the algorithms developed suffer from the lack of robustness and controllable accuracy. We have made the following progress: (1) We have analyzed thoroughly the localization properties of the wave-functions. We have developed a clear understanding of the physical as well as mathematical origin of the decay properties. One important conclusion is that even for metals, one can choose wavefunctions that decay faster than any algebraic power. (2) We have developed algorithms that make use of these localization properties. Our algorithms are based on non-orthogonal formulations of the density functional theory. Our key contribution is to add a localization step into the algorithm. The addition of this localization step makes the algorithm quite robust and much more accurate. Moreover, we can control the accuracy of these algorithms by changing the numerical parameters. (3) We have considerably improved the Fermi operator expansion (FOE) approach. Through pole expansion, we have developed the optimal scaling FOE algorithm.

  4. Integrated Multiscale Modeling of Molecular Computing Devices

    Energy Technology Data Exchange (ETDEWEB)

    Weinan E

    2012-03-29

    The main bottleneck in modeling transport in molecular devices is to develop the correct formulation of the problem and efficient algorithms for analyzing the electronic structure and dynamics using, for example, the time-dependent density functional theory. We have divided this task into several steps. The first step is to developing the right mathematical formulation and numerical algorithms for analyzing the electronic structure using density functional theory. The second step is to study time-dependent density functional theory, particularly the far-field boundary conditions. The third step is to study electronic transport in molecular devices. We are now at the end of the first step. Under DOE support, we have made subtantial progress in developing linear scaling and sub-linear scaling algorithms for electronic structure analysis. Although there has been a huge amount of effort in the past on developing linear scaling algorithms, most of the algorithms developed suffer from the lack of robustness and controllable accuracy. We have made the following progress: (1) We have analyzed thoroughly the localization properties of the wave-functions. We have developed a clear understanding of the physical as well as mathematical origin of the decay properties. One important conclusion is that even for metals, one can choose wavefunctions that decay faster than any algebraic power. (2) We have developed algorithms that make use of these localization properties. Our algorithms are based on non-orthogonal formulations of the density functional theory. Our key contribution is to add a localization step into the algorithm. The addition of this localization step makes the algorithm quite robust and much more accurate. Moreover, we can control the accuracy of these algorithms by changing the numerical parameters. (3) We have considerably improved the Fermi operator expansion (FOE) approach. Through pole expansion, we have developed the optimal scaling FOE algorithm.

  5. Model GC1312S Multifunction Integrated Optical Circuit Devices

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Model GC1312S multifunction integrated optical circuit device (MIOC) used in inertial-grade interferometric fiber optics gyroscopes (IFOGs) is fabricated by annealing and proton exchange process (APE). The unique feature of the device is the incorporation of the beat detection circuit besides all the features the conventional single Y-branch multifunction integrated optical circuit devices have. The device structure, operation principle and typical characteristics, etc., are briefly presented in this paper.

  6. Wearable Fall Detector using Integrated Sensors and Energy Devices.

    Science.gov (United States)

    Jung, Sungmook; Hong, Seungki; Kim, Jaemin; Lee, Sangkyu; Hyeon, Taeghwan; Lee, Minbaek; Kim, Dae-Hyeong

    2015-11-24

    Wearable devices have attracted great attentions as next-generation electronic devices. For the comfortable, portable, and easy-to-use system platform in wearable electronics, a key requirement is to replace conventional bulky and rigid energy devices into thin and deformable ones accompanying the capability of long-term energy supply. Here, we demonstrate a wearable fall detection system composed of a wristband-type deformable triboelectric generator and lithium ion battery in conjunction with integrated sensors, controllers, and wireless units. A stretchable conductive nylon is used as electrodes of the triboelectric generator and the interconnection between battery cells. Ethoxylated polyethylenimine, coated on the surface of the conductive nylon electrode, tunes the work function of a triboelectric generator and maximizes its performance. The electrical energy harvested from the triboelectric generator through human body motions continuously recharges the stretchable battery and prolongs hours of its use. The integrated energy supply system runs the 3-axis accelerometer and related electronics that record human body motions and send the data wirelessly. Upon the unexpected fall occurring, a custom-made software discriminates the fall signal and an emergency alert is immediately sent to an external mobile device. This wearable fall detection system would provide new opportunities in the mobile electronics and wearable healthcare.

  7. Wearable Fall Detector using Integrated Sensors and Energy Devices

    Science.gov (United States)

    Jung, Sungmook; Hong, Seungki; Kim, Jaemin; Lee, Sangkyu; Hyeon, Taeghwan; Lee, Minbaek; Kim, Dae-Hyeong

    2015-11-01

    Wearable devices have attracted great attentions as next-generation electronic devices. For the comfortable, portable, and easy-to-use system platform in wearable electronics, a key requirement is to replace conventional bulky and rigid energy devices into thin and deformable ones accompanying the capability of long-term energy supply. Here, we demonstrate a wearable fall detection system composed of a wristband-type deformable triboelectric generator and lithium ion battery in conjunction with integrated sensors, controllers, and wireless units. A stretchable conductive nylon is used as electrodes of the triboelectric generator and the interconnection between battery cells. Ethoxylated polyethylenimine, coated on the surface of the conductive nylon electrode, tunes the work function of a triboelectric generator and maximizes its performance. The electrical energy harvested from the triboelectric generator through human body motions continuously recharges the stretchable battery and prolongs hours of its use. The integrated energy supply system runs the 3-axis accelerometer and related electronics that record human body motions and send the data wirelessly. Upon the unexpected fall occurring, a custom-made software discriminates the fall signal and an emergency alert is immediately sent to an external mobile device. This wearable fall detection system would provide new opportunities in the mobile electronics and wearable healthcare.

  8. Integrated Computational System for Electrochemical Device Design and Simulation Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Illinois Rocstar LLC proposes to develop and demonstrate the use of an integrated computational environment and infrastructure for electrochemical device design and...

  9. Fabrication of integrated metallic MEMS devices

    DEFF Research Database (Denmark)

    Yalcinkaya, Arda Deniz; Ravnkilde, Jan Tue; Hansen, Ole

    2002-01-01

    A simple and complementary metal oxide semiconductor (CMOS) compatible fabrication technique for microelectromechanical (MEMS) devices is presented. The fabrication technology makes use of electroplated metal layers. Among the fabricated devices, high quality factor microresonators...

  10. Dispatching function calls across accelerator devices

    Energy Technology Data Exchange (ETDEWEB)

    Jacob, Arpith C.; Sallenave, Olivier H.

    2017-01-17

    In one embodiment, a computer-implemented method for dispatching a function call includes receiving, at a supervisor processing element (PE) and from an origin PE, an identifier of a target device, a stack frame of the origin PE, and an address of a function called from the origin PE. The supervisor PE allocates a target PE of the target device. The supervisor PE copies the stack frame of the origin PE to a new stack frame on a call stack of the target PE. The supervisor PE instructs the target PE to execute the function. The supervisor PE receives a notification that execution of the function is complete. The supervisor PE copies the stack frame of the target PE to the stack frame of the origin PE. The supervisor PE releases the target PE of the target device. The supervisor PE instructs the origin PE to resume execution of the program.

  11. Dispatching function calls across accelerator devices

    Energy Technology Data Exchange (ETDEWEB)

    Jacob, Arpith C.; Sallenave, Olivier H.

    2017-01-10

    In one embodiment, a computer-implemented method for dispatching a function call includes receiving, at a supervisor processing element (PE) and from an origin PE, an identifier of a target device, a stack frame of the origin PE, and an address of a function called from the origin PE. The supervisor PE allocates a target PE of the target device. The supervisor PE copies the stack frame of the origin PE to a new stack frame on a call stack of the target PE. The supervisor PE instructs the target PE to execute the function. The supervisor PE receives a notification that execution of the function is complete. The supervisor PE copies the stack frame of the target PE to the stack frame of the origin PE. The supervisor PE releases the target PE of the target device. The supervisor PE instructs the origin PE to resume execution of the program.

  12. Integrated Multiscale Modeling of Molecular Computing Devices

    Energy Technology Data Exchange (ETDEWEB)

    Jerzy Bernholc

    2011-02-03

    Nanoscience has been one of the major research focuses of the U.S. and much of the world for the past decade, in part because of its promise to revolutionize many fields, including materials, medicine, and electronics. At the heart of this promise is the fact that nanostructured materials can behave radically differently than their macroscopic counterparts (e.g., bulk gold is such an inert metal that it has found applications in such diverse fields as jewelry, biomedical implants and dentistry, whereas gold nanoparticles are highly reactive and are thus useful as nanocatalysts) and have properties that are tunable due to a strong dependence on the size and surface area of the nanostructure. Thus, nanoscience offers a remarkable opportunity to develop new functional systems built around nanostructured materials with unusual and tunable properties and functionality. The transition from nanoscience to nanotechnology becomes possible when nanostructured systems can be made reproducibly by processes that can be implemented on a large scale. The microelectronics industry is one example of an industry that has evolved into the realm of nanotechnology, since the exponential reduction in feature size in computer chips has resulted in feature sizes now under 50nm (45nm in production, 32nm demonstrated; feature size has been going down by a factor of approximately 1/{radical}2 every 18 months as chip density has doubled every 18 months according to Moore's law). Silicon-based microelectronics relies on etching features into a single-crystal silicon substrate by photolithography. As the feature size of silicon-based microelectronics continues to decrease, the continuation of Moore's law to below 20nm feature sizes is being questioned, due to limitations in both the physics of the transistors (leading to unacceptable power dissipation) and doubts about the scalability of top-down photolithography-based manufacturing to such small sizes. There is no doubt that

  13. Planar nanophotonic devices and integration technologies

    Science.gov (United States)

    De La Rue, Richard M.; Sorel, Marc; Samarelli, Antonio; Velha, Philippe; Strain, Michael; Johnson, Nigel P.; Sharp, Graham; Rahman, Faiz; Khokhar, Ali Z.; Macintyre, Douglas S.; McMeekin, Scott G.; Lahiri, Basudev

    2011-07-01

    Planar devices that can be categorised as having a nanophotonic dimension constitute an increasingly important area of photonics research. Device structures that come under the headings of photonic crystals, photonic wires and metamaterials are all of interest - and devices based on combinations of these conceptual approaches may also play an important role. Planar micro-/nano-photonic devices seem likely to be exploited across a wide spectrum of applications in optoelectronics and photonics. This spectrum includes the domains of display devices, biomedical sensing and sensing more generally, advanced fibre-optical communications systems - and even communications down to the local area network (LAN) level. This article will review both device concepts and the applications possibilities of the various different devices.

  14. CMOS and BiCMOS process integration and device characterization

    CERN Document Server

    El-Kareh, Badih

    2009-01-01

    Covers both the theoretical and practical aspects of modern silicon devices and the relationship between their electrical properties and processing conditions. This book also covers silicon devices and integrated process technologies. It discusses modern silicon devices, their characteristics, and interactions with process parameters.

  15. Integration of functional oxides with semiconductors

    CERN Document Server

    Demkov, Alexander A

    2014-01-01

    This unique book describes the basic physical principles of the oxide/semiconductor epitaxy and offers a view of the current state of the field. It shows how this technology enables large-scale integration of oxide electronic and photonic devices, and describes possible hybrid semiconductor/oxide systems. The book incorporates both theoretical and experimental advances to explore the heteroepitaxy of tuned functional oxides and semiconductors to identify material, device and characterization challenges, and to present the incredible potential in the realization of multifunctional devices and monolithic integration of materials and devices. This book also: ·         Discusses why semiconductor substrates are an excellent integration platform for making hybrid logic/sensor devices ·         Provides a brief introduction to the methods accessible to non-experts, before going into details of interest to the experts ·         Includes a detailed glossary that explains the specialized ter...

  16. Integrated LTCC packaging for use in biomedical devices.

    Science.gov (United States)

    Chlebowski, Arthur L; Chow, Eric Y; Ellison, Casey; Irazoqui, Pedro P

    2012-01-01

    As implantable devices gain more widespread use, medical device manufacturers are constantly looking for novel materials that increase and improve capability and functionality. The packaging needs to be biocompatible, but it is also highly desirable for it to be radio transparent to facilitate wireless telemetry and remote powering. Low temperature co-fired ceramics (LTCC) provide a viable solution that meets these desired specifications while also having characteristics that support ease of manufacturing such as the ability for molding, shaping, and even embedding components within the material. In this work, inductor coils used for wireless telemetry and powering are integrated into the walls of the LTCC-based package to maximize the size of the passive component while optimizing the miniaturization of the implant. The package designed and fabricated in this work consisted of inductors approximating 20 mH with a quality factor of 7.8 at 2 MHz. When compared to similar devices in the literature the LTCC inductor out performed these devices when a power-link figure of merit is used for comparison.

  17. Integrated power devices and TCAD simulation

    CERN Document Server

    Fu, Yue; Ng, Wai Tung

    2014-01-01

    ""Semiconductor engineering has advanced to the point where the devices-in 3D with layout, thermal, and other effects thrown in-can themselves be computer modeled, along with the processes underlying the devices. This book provides a readable engineering overview of the pre-circuit considerations.""-Dennis Feucht, Innovatia Laboratories, Cayo, Belize in H2Power Today, August 2014

  18. Integrating function and mechanism.

    Science.gov (United States)

    McNamara, John M; Houston, Alasdair I

    2009-12-01

    Behavioural ecology often makes the assumption that animals can respond flexibly by adopting the optimal behaviour for each circumstance. However, as ethologists have long known, behaviour is determined by mechanisms that are not optimal in every circumstance. As we discuss here, we believe that it is necessary to integrate these separate traditions by considering the evolution of mechanisms, an approach referred to as 'Evo-mecho'. This integration is timely because there is a growing awareness of the importance of environmental complexity in shaping behaviour; there are established and effective computational procedures for simulating evolution and there is rapidly increasing knowledge of the neuronal basis of decision-making. Although behavioural ecologists have built complex models of optimal behaviour in simple environments, we argue that they need to focus on simple mechanisms that perform well in complex environments.

  19. Structural Functionalism as a Heuristic Device.

    Science.gov (United States)

    Chilcott, John H.

    1998-01-01

    Argues that structural functionalism as a method for conducting fieldwork and as a format for the analysis of ethnographic data remains a powerful model, one that is easily understood by professional educators. As a heuristic device, functionalist theory can help in the solution of a problem that is otherwise incapable of theoretical…

  20. Integrating Sphere-based Weathering Device

    Data.gov (United States)

    Federal Laboratory Consortium — Description:In the artificial ultraviolet (UV) weathering of materials, a need exists for weathering devices that can uniformly illuminate test specimens with a high...

  1. On Local Integrated Cosine Functions

    Institute of Scientific and Technical Information of China (English)

    SHI Jin-e; ZHENG Wei-xing

    2001-01-01

    Suppose X is a Banach space, and A is a closed operator. We give some equivalent conditions between A generating a local integrated cosine functions and the existence of solutions of abstract Cauchy problems.

  2. Integrated on-chip mass spectrometry reaction monitoring in microfluidic devices containing porous polymer monolithic columns.

    Science.gov (United States)

    Dietze, C; Schulze, S; Ohla, S; Gilmore, K; Seeberger, P H; Belder, D

    2016-09-21

    Chip-based microfluidics enable the seamless integration of different functions into single devices. Here, we present microfluidic chips containing porous polymer monolithic columns as a means to facilitate chemical transformations as well as both downstream chromatographic separation and mass spectrometric analysis. Rapid liquid phase lithography prototyping creates the multifunctional device economically.

  3. Graphene-Based Integrated Photovoltaic Energy Harvesting/Storage Device.

    Science.gov (United States)

    Chien, Chih-Tao; Hiralal, Pritesh; Wang, Di-Yan; Huang, I-Sheng; Chen, Chia-Chun; Chen, Chun-Wei; Amaratunga, Gehan A J

    2015-06-24

    Energy scavenging has become a fundamental part of ubiquitous sensor networks. Of all the scavenging technologies, solar has the highest power density available. However, the energy source is erratic. Integrating energy conversion and storage devices is a viable route to obtain self-powered electronic systems which have long-term maintenance-free operation. In this work, we demonstrate an integrated-power-sheet, consisting of a string of series connected organic photovoltaic cells (OPCs) and graphene supercapacitors on a single substrate, using graphene as a common platform. This results in lighter and more flexible power packs. Graphene is used in different forms and qualities for different functions. Chemical vapor deposition grown high quality graphene is used as a transparent conductor, while solution exfoliated graphene pastes are used as supercapacitor electrodes. Solution-based coating techniques are used to deposit the separate components onto a single substrate, making the process compatible with roll-to-roll manufacture. Eight series connected OPCs based on poly(3-hexylthiophene)(P3HT):phenyl-C61-butyric acid methyl ester (PC60 BM) bulk-heterojunction cells with aluminum electrodes, resulting in a ≈5 V open-circuit voltage, provide the energy harvesting capability. Supercapacitors based on graphene ink with ≈2.5 mF cm(-2) capacitance provide the energy storage capability. The integrated-power-sheet with photovoltaic (PV) energy harvesting and storage functions had a mass of 0.35 g plus the substrate.

  4. Solution processed integrated pixel element for an imaging device

    Science.gov (United States)

    Swathi, K.; Narayan, K. S.

    2016-09-01

    We demonstrate the implementation of a solid state circuit/structure comprising of a high performing polymer field effect transistor (PFET) utilizing an oxide layer in conjunction with a self-assembled monolayer (SAM) as the dielectric and a bulk-heterostructure based organic photodiode as a CMOS-like pixel element for an imaging sensor. Practical usage of functional organic photon detectors requires on chip components for image capture and signal transfer as in the CMOS/CCD architecture rather than simple photodiode arrays in order to increase speed and sensitivity of the sensor. The availability of high performing PFETs with low operating voltage and photodiodes with high sensitivity provides the necessary prerequisite to implement a CMOS type image sensing device structure based on organic electronic devices. Solution processing routes in organic electronics offers relatively facile procedures to integrate these components, combined with unique features of large-area, form factor and multiple optical attributes. We utilize the inherent property of a binary mixture in a blend to phase-separate vertically and create a graded junction for effective photocurrent response. The implemented design enables photocharge generation along with on chip charge to voltage conversion with performance parameters comparable to traditional counterparts. Charge integration analysis for the passive pixel element using 2D TCAD simulations is also presented to evaluate the different processes that take place in the monolithic structure.

  5. Multilayered Microelectronic Device Package With An Integral Window

    Science.gov (United States)

    Peterson, Kenneth A.; Watson, Robert D.

    2004-10-26

    A microelectronic package with an integral window mounted in a recessed lip for housing a microelectronic device. The device can be a semiconductor chip, a CCD chip, a CMOS chip, a VCSEL chip, a laser diode, a MEMS device, or a IMEMS device. The package can be formed of a low temperature co-fired ceramic (LTCC) or high temperature cofired ceramic (HTCC) multilayered material, with the integral window being simultaneously joined (e.g. co-fired) to the package body during LTCC or HTCC processing. The microelectronic device can be flip-chip bonded and oriented so that a light-sensitive side is optically accessible through the window. The result is a compact, low profile package, having an integral window mounted in a recessed lip, that can be hermetically sealed.

  6. Integration of Capacitive Micromachined Ultrasound Transducers to Microfluidic Devices

    KAUST Repository

    Viržonis, Darius

    2013-10-22

    The design and manufacturing flexibility of capacitive micromachined ultrasound transducers (CMUT) makes them attractive option for integration with microfluidic devices both for sensing and fluid manipulation. CMUT concept is introduced here by presentin

  7. Medicine Delivery Device with Integrated Sterilization and Detection

    Science.gov (United States)

    Shearn, Michael J.; Greer, Harold F.; Manohara, Harish

    2013-01-01

    or identification of the medicine itself. This constrained volume that is located immediately prior to delivery into a patient, ensures that the medicine delivery device is inherently sterile. An additional benefit to integrating a high-surface-area template within the fluid channel of a medicine delivery device is that one can envision a number of different functional coatings that could facilitate the capture and analysis of either microbial contaminants or the medicine itself. For example, one could attach antibodies or some other binding agent with a specific affinity to the silicon nanotip template. Once a target molecule or microbe is bound to the high-surface- area template, one could use an optical analytical technique such as fluorescence or adsorption to determine the identity and potentially the concentration of the species of interest. By illuminating the bound species from the back, it may also be possible to probe only the molecules with an evanescent wave, making detection of the species from the front side of the device much simpler.

  8. Integrated microfluidic device for single-cell trapping and spectroscopy

    KAUST Repository

    Liberale, Carlo

    2013-02-13

    Optofluidic microsystems are key components towards lab-on-a-chip devices for manipulation and analysis of biological specimens. In particular, the integration of optical tweezers (OT) in these devices allows stable sample trapping, while making available mechanical, chemical and spectroscopic analyses.

  9. Multiple Quantum Well (MQW) Devices For Monolithic Integrated Optoelectronics

    Science.gov (United States)

    Wood, Thomas H.

    1988-05-01

    Semiconductor MQWs represent a new technology for opto-electronics. These MQWs have an electroabsorption effect approximately 50 times larger than conventional semiconductors. They are compatible with existing source and detector material systems and produce devices that are compact and high speed, which makes them useful for monolithic integrated optoelectronic devices.

  10. Nanofabrication of Metallic Nanostructures and Integration with Light Detection Devices

    Science.gov (United States)

    Huang, Liang

    Metallic nanostructures have been investigated with various applications especially for integration with light detection devices. The incident light can be manipulated by those nanostructures to enhance light absorption therefor improve device performance. However, previous studies focused on optical design. The electrical properties of these integrated light detection devices have not been fully considered. The photon generated carriers transport and collection are critical for light detection devices as well. An optimized device platform considering from both the optical and electrical aspects to fully utilize these nanostructures is highly desired for future light detection devices. This dissertation targeted on three objectives, beginning with the fabrication process development of various nanostructures on different substrates. High quality nanostructures were achieved with minimum 20nm gap and 45nm line width. The second objective was developing the metallic fishnet nanostructures integrated Schottky contact a-Si solar cell to improve both light absorption and photon generated carrier collection. The fishnet was designed as the light trapping structure and 2D connected top contact to collect carriers. The third objective was developing metallic nanostructures integrated GeSn photodetectors. The H shape nano antennas were integrated on GeSn photodetectors. Multiple resonant absorption peaks at infrared range were observed using spectroscopic ellipsometry. However, there was no obvious photoresponse value improvement of developed solar cells and H shape antennas integrated GeSn photodetectors. For further investigation, interdigitated electrodes integrated GeSn photodetectors were designed. With less carrier transit time, the responsivity value of the integrated Ge0.991Sn0.009 photodetector was 72muA/W at 1.55mum at room temperature which was 6 times higher comparing to device without integration. Meanwhile, with the increased carrier life time by decreasing

  11. Integrated Multiscale Modeling of Molecular Computing Devices

    Energy Technology Data Exchange (ETDEWEB)

    Gregory Beylkin

    2012-03-23

    Significant advances were made on all objectives of the research program. We have developed fast multiresolution methods for performing electronic structure calculations with emphasis on constructing efficient representations of functions and operators. We extended our approach to problems of scattering in solids, i.e. constructing fast algorithms for computing above the Fermi energy level. Part of the work was done in collaboration with Robert Harrison and George Fann at ORNL. Specific results (in part supported by this grant) are listed here and are described in greater detail. (1) We have implemented a fast algorithm to apply the Green's function for the free space (oscillatory) Helmholtz kernel. The algorithm maintains its speed and accuracy when the kernel is applied to functions with singularities. (2) We have developed a fast algorithm for applying periodic and quasi-periodic, oscillatory Green's functions and those with boundary conditions on simple domains. Importantly, the algorithm maintains its speed and accuracy when applied to functions with singularities. (3) We have developed a fast algorithm for obtaining and applying multiresolution representations of periodic and quasi-periodic Green's functions and Green's functions with boundary conditions on simple domains. (4) We have implemented modifications to improve the speed of adaptive multiresolution algorithms for applying operators which are represented via a Gaussian expansion. (5) We have constructed new nearly optimal quadratures for the sphere that are invariant under the icosahedral rotation group. (6) We obtained new results on approximation of functions by exponential sums and/or rational functions, one of the key methods that allows us to construct separated representations for Green's functions. (7) We developed a new fast and accurate reduction algorithm for obtaining optimal approximation of functions by exponential sums and/or their rational representations.

  12. Medical Device Integration Model Based on the Internet of Things.

    Science.gov (United States)

    Hao, Aiyu; Wang, Ling

    2015-01-01

    At present, hospitals in our country have basically established the HIS system, which manages registration, treatment, and charge, among many others, of patients. During treatment, patients need to use medical devices repeatedly to acquire all sorts of inspection data. Currently, the output data of the medical devices are often manually input into information system, which is easy to get wrong or easy to cause mismatches between inspection reports and patients. For some small hospitals of which information construction is still relatively weak, the information generated by the devices is still presented in the form of paper reports. When doctors or patients want to have access to the data at a given time again, they can only look at the paper files. Data integration between medical devices has long been a difficult problem for the medical information system, because the data from medical devices are lack of mandatory unified global standards and have outstanding heterogeneity of devices. In order to protect their own interests, manufacturers use special protocols, etc., thus causing medical decices to still be the "lonely island" of hospital information system. Besides, unfocused application of the data will lead to failure to achieve a reasonable distribution of medical resources. With the deepening of IT construction in hospitals, medical information systems will be bound to develop towards mobile applications, intelligent analysis, and interconnection and interworking, on the premise that there is an effective medical device integration (MDI) technology. To this end, this paper presents a MDI model based on the Internet of Things (IoT). Through abstract classification, this model is able to extract the common characteristics of the devices, resolve the heterogeneous differences between them, and employ a unified protocol to integrate data between devices. And by the IoT technology, it realizes interconnection network of devices and conducts associate matching

  13. A hybrid approach to device integration on a genetic analysis platform

    Science.gov (United States)

    Brennan, Des; Jary, Dorothee; Kurg, Ants; Berik, Evgeny; Justice, John; Aherne, Margaret; Macek, Milan; Galvin, Paul

    2012-10-01

    Point-of-care (POC) systems require significant component integration to implement biochemical protocols associated with molecular diagnostic assays. Hybrid platforms where discrete components are combined in a single platform are a suitable approach to integration, where combining multiple device fabrication steps on a single substrate is not possible due to incompatible or costly fabrication steps. We integrate three devices each with a specific system functionality: (i) a silicon electro-wetting-on-dielectric (EWOD) device to move and mix sample and reagent droplets in an oil phase, (ii) a polymer microfluidic chip containing channels and reservoirs and (iii) an aqueous phase glass microarray for fluorescence microarray hybridization detection. The EWOD device offers the possibility of fully integrating on-chip sample preparation using nanolitre sample and reagent volumes. A key challenge is sample transfer from the oil phase EWOD device to the aqueous phase microarray for hybridization detection. The EWOD device, waveguide performance and functionality are maintained during the integration process. An on-chip biochemical protocol for arrayed primer extension (APEX) was implemented for single nucleotide polymorphism (SNiP) analysis. The prepared sample is aspirated from the EWOD oil phase to the aqueous phase microarray for hybridization. A bench-top instrumentation system was also developed around the integrated platform to drive the EWOD electrodes, implement APEX sample heating and image the microarray after hybridization.

  14. Integrated RF MEMS/CMOS Devices

    CERN Document Server

    Mansour, R R; Bakeri-Kassem, M

    2008-01-01

    A maskless post-processing technique for CMOS chips is developed that enables the fabrication of RF MEMS parallel-plate capacitors with a high quality factor and a very compact size. Simulations and measured results are presented for several MEMS/CMOS capacitors. A 2-pole coupled line tunable bandpass filter with a center frequency of 9.5 GHz is designed, fabricated and tested. A tuning range of 17% is achieved using integrated variable MEMS/CMOS capacitors with a quality factor exceeding 20. The tunable filter occupies a chip area of 1.2 x 2.1 mm2.

  15. Integrating functional oxides with graphene

    Science.gov (United States)

    Hong, X.; Zou, K.; DaSilva, A. M.; Ahn, C. H.; Zhu, J.

    2012-08-01

    Graphene-oxide hybrid structures offer the opportunity to combine the versatile functionalities of oxides with the excellent electronic transport in graphene. Understanding and controlling how the dielectric environment affects the intrinsic properties of graphene is also critical to fundamental studies and technological development of graphene. Here we review our recent effort on understanding the transport properties of graphene interfaced with ferroelectric Pb(Zr,Ti)O3 (PZT) and high-κ HfO2. Graphene field effect devices prepared on high-quality single crystal PZT substrates exhibit up to tenfold increases in mobility compared to SiO2-gated devices. An unusual and robust resistance hysteresis is observed in these samples, which is attributed to the complex surface chemistry of the ferroelectric. Surface polar optical phonons of oxides in graphene transistors play an important role in the device performance. We review their effects on mobility and the high source-drain bias saturation current of graphene, which are crucial for developing graphene-based room temperature high-speed amplifiers. Oxides also introduce scattering sources that limit the low temperature electron mobility in graphene. We present a comprehensive study of the transport and quantum scattering times to differentiate various scattering scenarios and quantitatively evaluate the density and distribution of charged impurities and the effect of dielectric screening. Our results can facilitate the design of multifunctional nano-devices utilizing graphene-oxide hybrid structures.

  16. Product design - Molecules, devices, functional products, and formulated products

    DEFF Research Database (Denmark)

    Gani, Rafiqul; Ng, Ka M.

    2015-01-01

    Chemical product design is a multidisciplinary and diverse subject. This article provides an overview of product design while focusing on product conceptualization. Four product types are considered - molecular products, formulated products, devices and functional products. For molecular products......, computer-aided design tools are used to predict the physicochemical properties of single molecules and blends. For formulated products, an integrated experiment-modeling approach is used to generate the formula with the specified product attributes. For devices and functional products, conceptual product...... design is carried out by modeling the product based on thermodynamics, kinetics and transport processes, by performing experiments, and by decision making based on rule-based methods The results are product specifications in terms of the type of ingredients, composition, and the structure, form, shape...

  17. Video integrated measurement system. [Diagnostic display devices

    Energy Technology Data Exchange (ETDEWEB)

    Spector, B.; Eilbert, L.; Finando, S.; Fukuda, F.

    1982-06-01

    A Video Integrated Measurement (VIM) System is described which incorporates the use of various noninvasive diagnostic procedures (moire contourography, electromyography, posturometry, infrared thermography, etc.), used individually or in combination, for the evaluation of neuromusculoskeletal and other disorders and their management with biofeedback and other therapeutic procedures. The system provides for measuring individual diagnostic and therapeutic modes, or multiple modes by split screen superimposition, of real time (actual) images of the patient and idealized (ideal-normal) models on a video monitor, along with analog and digital data, graphics, color, and other transduced symbolic information. It is concluded that this system provides an innovative and efficient method by which the therapist and patient can interact in biofeedback training/learning processes and holds considerable promise for more effective measurement and treatment of a wide variety of physical and behavioral disorders.

  18. Wafer Fusion for Integration of Semiconductor Materials and Devices

    Energy Technology Data Exchange (ETDEWEB)

    Choquette, K.D.; Geib, K.M.; Hou, H.Q.; Allerman, A.A.; Kravitz, S.; Follstaedt, D.M.; Hindi, J.J.

    1999-05-01

    We have developed a wafer fusion technology to achieve integration of semiconductor materials and heterostructures with widely disparate lattice parameters, electronic properties, and/or optical properties for novel devices not now possible on any one substrate. Using our simple fusion process which uses low temperature (400-600 C) anneals in inert N{sub 2} gas, we have extended the scope of this technology to examine hybrid integration of dissimilar device technologies. As a specific example, we demonstrate wafer bonding vertical cavity surface emitting lasers (VCSELs) to transparent AlGaAs and GaP substrates to fabricate bottom-emitting short wavelength VCSELs. As a baseline fabrication technology applicable to many semiconductor systems, wafer fusion will revolutionize the way we think about possible semiconductor devices, and enable novel device configurations not possible by epitaxial growth.

  19. Framework for the Integration of Mobile Device Features in PLM

    OpenAIRE

    Hopf, Jens Michael

    2016-01-01

    Currently, companies have covered their business processes with stationary workstations while mobile business applications have limited relevance. Companies can cover their overall business processes more time-efficiently and cost-effectively when they integrate mobile users in workflows using mobile device features. The objective is a framework that can be used to model and control business applications for PLM processes using mobile device features to allow a totally new user experience.

  20. Si light-emitting device in integrated photonic CMOS ICs

    Science.gov (United States)

    Xu, Kaikai; Snyman, Lukas W.; Aharoni, Herzl

    2017-07-01

    The motivation for integrated Si optoelectronics is the creation of low-cost photonics for mass-market applications. Especially, the growing demand for sensitive biochemical sensors in the environmental control or medicine leads to the development of integrated high resolution sensors. Here CMOS-compatible Si light-emitting device structures are presented for investigating the effect of various depletion layer profiles and defect engineering on the photonic transition in the 1.4-2.8 eV. A novel Si device is proposed to realize both a two-terminal Si-diode light-emitting device and a three-terminal Si gate-controlled diode light-emitting device in the same device structure. In addition to the spectral analysis, differences between two-terminal and three-terminal devices are discussed, showing the light emission efficiency change. The proposed Si optical source may find potential applications in micro-photonic systems and micro-optoelectro-mechanical systems (MOEMS) in CMOS integrated circuitry.

  1. Integrating Android Devices into Network Management Systems based on SNMP

    Directory of Open Access Journals (Sweden)

    Fernando Hidalgo

    2014-06-01

    Full Text Available Mobile devices are becoming essential for today life. In developed countries, about half of the people have a smartphone, resulting in millions of these electronic devices. Android is the most popular operating system for smartphones and other electronic devices such as tablets. Hence, for network administrators, it is essential to start managing all the Android based devices. SNMP is the de facto standard for network administration, where agents that are running in managed devices are polled by management stations. Some primitive tools have already been developed to transform an Android device as a basic management station. However, so far, there is no SNMP agent for this operating system. In this paper, we develop the first SNMP agent for Android. We also propose an SNMP benchmark to study the SNMP traffic that can be supported by our SNMP agent over some real and actual Android devices. The results obtained show that it is realistic to integrate mobile Android devices in network management systems since they can handle a high number of SNMP requests in a reasonable period of time.

  2. Integration of isothermal amplification methods in microfluidic devices: Recent advances.

    Science.gov (United States)

    Giuffrida, Maria Chiara; Spoto, Giuseppe

    2017-04-15

    The integration of nucleic acids detection assays in microfluidic devices represents a highly promising approach for the development of convenient, cheap and efficient diagnostic tools for clinical, food safety and environmental monitoring applications. Such tools are expected to operate at the point-of-care and in resource-limited settings. The amplification of the target nucleic acid sequence represents a key step for the development of sensitive detection protocols. The integration in microfluidic devices of the most popular technology for nucleic acids amplifications, polymerase chain reaction (PCR), is significantly limited by the thermal cycling needed to obtain the target sequence amplification. This review provides an overview of recent advances in integration of isothermal amplification methods in microfluidic devices. Isothermal methods, that operate at constant temperature, have emerged as promising alternative to PCR and greatly simplify the implementation of amplification methods in point-of-care diagnostic devices and devices to be used in resource-limited settings. Possibilities offered by isothermal methods for digital droplet amplification are discussed. Copyright © 2016 Elsevier B.V. All rights reserved.

  3. Integrated Nanophotonic Silicon Devices for Next Generation Computing Chips

    Science.gov (United States)

    Djordjevic, Stevan

    Development of the computing platform of the future depends largely on high bandwidth interconnects at intra-die level. Silicon photonics, as an innately CMOS compatible technology, is a promising candidate for delivering terabit per second bandwidths through the use of wavelength division multiplex (WDM) signaling. Silicon photonic interconnects offer unmatched bandwidth, density, energy efficiency, latency and reach, compared with the electrical interconnects. WDM silicon photonic links are viewed today as a promising solution for resolving the inter/intra-chip communication bottlenecks for high performance computing systems. Towards its maturity, silicon photonic technology has to resolve the issues of waveguide propagation loss, density of device integration, thermal stability of resonant devices, heterogeneous integration of various materials and many other problems. This dissertation describes the development of integrated photonic technology on silicon and silicon nitride platforms in the increased order of device complexity, from the fabrication process of low loss waveguides and efficient off-chip coupling devices, to the die-size reconfigurable lattice filters for optical signal processing. Particular emphasis of the dissertation is on the demonstration of CMOS-compatible, athermal silicon ring modulators that potentially hold the key to solving the thermal problem of silicon photonic devices. The development of high quality amorphous titanium dioxide films with negative thermo-optic coefficient enabled the fabrication of gigahertz-bandwidth silicon ring modulators that can be made insensitive to ambient temperature changes.

  4. The Marketing Plan: An Integrative Device for Teaching Marketing Management.

    Science.gov (United States)

    Berdine, W. R.; Petersen, James C.

    1980-01-01

    The importance of the marketing plan is stressed as an integrative device for teaching marketing management, and a structure is presented to assist students in designing a marketing plan. Components of this plan include marketing objectives, targeting market and buying motives, external environment and competition, product, price, and promotion.…

  5. Bioluminescent bioreporter integrated circuit devices and methods for detecting ammonia

    Energy Technology Data Exchange (ETDEWEB)

    Simpson, Michael L [Knoxville, TN; Paulus, Michael J [Knoxville, TN; Sayler, Gary S [Blaine, TN; Applegate, Bruce M [West Lafayette, IN; Ripp, Steven A [Knoxville, TN

    2007-04-24

    Monolithic bioelectronic devices for the detection of ammonia includes a microorganism that metabolizes ammonia and which harbors a lux gene fused with a heterologous promoter gene stably incorporated into the chromosome of the microorganism and an Optical Application Specific Integrated Circuit (OASIC). The microorganism is generally a bacterium.

  6. The Marketing Plan: An Integrative Device for Teaching Marketing Management.

    Science.gov (United States)

    Berdine, W. R.; Petersen, James C.

    1980-01-01

    The importance of the marketing plan is stressed as an integrative device for teaching marketing management, and a structure is presented to assist students in designing a marketing plan. Components of this plan include marketing objectives, targeting market and buying motives, external environment and competition, product, price, and promotion.…

  7. FISHprep: A Novel Integrated Device for Metaphase FISH Sample Preparation

    DEFF Research Database (Denmark)

    Shah, Pranjul Jaykumar; Vedarethinam, Indumathi; Kwasny, Dorota;

    2011-01-01

    We present a novel integrated device for preparing metaphase chromosomes spread slides (FISHprep). The quality of cytogenetic analysis from patient samples greatly relies on the efficiency of sample pre-treatment and/or slide preparation. In cytogenetic slide preparation, cell cultures are routin...... with minimal handling for metaphase FISH slide preparation....

  8. Integration of Multiple Components in Polystyrene-based Microfluidic Devices Part 1: Fabrication and Characterization

    Science.gov (United States)

    Johnson, Alicia S.; Anderson, Kari B.; Halpin, Stephen T.; Kirkpatrick, Douglas C.; Spence, Dana M.; Martin, R. Scott

    2012-01-01

    In Part I of a two-part series, we describe a simple, and inexpensive approach to fabricate polystyrene devices that is based upon melting polystyrene (from either a Petri dish or powder form) against PDMS molds or around electrode materials. The ability to incorporate microchannels in polystyrene and integrate the resulting device with standard laboratory equipment such as an optical plate reader for analyte readout and micropipettors for fluid propulsion is first described. A simple approach for sample and reagent delivery to the device channels using a standard, multi-channel micropipette and a PDMS-based injection block is detailed. Integration of the microfluidic device with these off-chip functions (sample delivery and readout) enables high throughput screens and analyses. An approach to fabricate polystyrene-based devices with embedded electrodes is also demonstrated, thereby enabling the integration of microchip electrophoresis with electrochemical detection through the use of a palladium electrode (for a decoupler) and carbon-fiber bundle (for detection). The device was sealed against a PDMS-based microchannel and used for the electrophoretic separation and amperometric detection of dopamine, epinephrine, catechol, and 3,4-dihydroxyphenylacetic acid. Finally, these devices were compared against PDMS-based microchips in terms of their optical transparency and absorption of an anti-platelet drug, clopidogrel. Part I of this series lays the foundation for Part II, where these devices were utilized for various on-chip cellular analysis. PMID:23120747

  9. Control and automation of multilayered integrated microfluidic device fabrication.

    Science.gov (United States)

    Kipper, Sarit; Frolov, Ludmila; Guy, Ortal; Pellach, Michal; Glick, Yair; Malichi, Asaf; Knisbacher, Binyamin A; Barbiro-Michaely, Efrat; Avrahami, Dorit; Yavets-Chen, Yehuda; Levanon, Erez Y; Gerber, Doron

    2017-01-31

    Integrated microfluidics is a sophisticated three-dimensional (multi layer) solution for high complexity serial or parallel processes. Fabrication of integrated microfluidic devices requires soft lithography and the stacking of thin-patterned PDMS layers. Precise layer alignment and bonding is crucial. There are no previously reported standards for alignment of the layers, which is mostly performed using uncontrolled processes with very low alignment success. As a result, integrated microfluidics is mostly used in academia rather than in the many potential industrial applications. We have designed and manufactured a semiautomatic Microfluidic Device Assembly System (μDAS) for full device production. μDAS comprises an electrooptic mechanical system consisting of four main parts: optical system, smart media holder (for PDMS), a micropositioning xyzθ system and a macropositioning XY mechanism. The use of the μDAS yielded valuable information regarding PDMS as the material for device fabrication, revealed previously unidentified errors, and enabled optimization of a robust fabrication process. In addition, we have demonstrated the utilization of the μDAS technology for fabrication of a complex 3 layered device with over 12 000 micromechanical valves and an array of 64 × 64 DNA spots on a glass substrate with high yield and high accuracy. We increased fabrication yield from 25% to about 85% with an average layer alignment error of just ∼4 μm. It also increased our protein expression yields from 80% to over 90%, allowing us to investigate more proteins per experiment. The μDAS has great potential to become a valuable tool for both advancing integrated microfluidics in academia and producing and applying microfluidic devices in the industry.

  10. Innovative devices for integrated circuits - A design perspective

    Science.gov (United States)

    Schmitt-Landsiedel, D.; Werner, C.

    2009-04-01

    MOS devices go 3D, new quantum effect devices appear in the research labs. This paper discusses the impact of various innovative device architectures on circuit design. Examples of circuits with FinFETs or Multi-Gate-FETs are shown and their performance is compared with classically scaled CMOS circuits both for digital and analog applications. As an example for novel quantum effect devices beyond CMOS we discuss circuits with Tunneling Field Effect Transistors and their combination with classical MOSFETs and MuGFETs. Finally the potential of more substantial paradigm changes in circuit design will be exploited for the example of magnetic quantum cellular automata using a novel integrated magnetic field clocking scheme.

  11. Functionalization of Semiconductor Nanomaterials for Optoelectronic Devices And Components

    Science.gov (United States)

    2015-03-04

    alternative for single quarter wavelength coating. Previous investigations on Ta2O5 include corrosion protection coating, electrochromic devices ...Functionalization of semiconductor nanomaterials for optoelectronic devices and components 5a. CONTRACT NUMBER 5b. GRANT NUMBER FA9550-10-1-0136 5c. PROGRAM...Distribution A 13. SUPPLEMENTARY NOTES None 14. ABSTRACT Various semiconductor nanomaterials were functionalized for optoelectronic devices , such

  12. 77 FR 19032 - Certain Semiconductor Integrated Circuit Devices and Products Containing Same Notice of Receipt...

    Science.gov (United States)

    2012-03-29

    ...] [FR Doc No: 2012-7567] INTERNATIONAL TRADE COMMISSION [DN 2888] Certain Semiconductor Integrated... Certain Semiconductor Integrated Circuit Devices and Products Containing Same, DN 2888; the Commission is... importation of certain semiconductor integrated circuit devices and products containing same. The...

  13. RFID and Memory Devices Fabricated Integrally on Substrates

    Science.gov (United States)

    Schramm, Harry F.

    2004-01-01

    Electronic identification devices containing radio-frequency identification (RFID) circuits and antennas would be fabricated integrally with the objects to be identified, according to a proposal. That is to say, the objects to be identified would serve as substrates for the deposition and patterning of the materials of the devices used to identify them, and each identification device would be bonded to the identified object at the molecular level. Vacuum arc vapor deposition (VAVD) is the NASA derived process for depositing layers of material on the substrate. This proposal stands in contrast to the current practice of fabricating RFID and/or memory devices as wafer-based, self-contained integrated-circuit chips that are subsequently embedded in or attached to plastic cards to make smart account-information cards and identification badges. If one relies on such a chip to store data on the history of an object to be tracked and the chip falls off or out of the object, then one loses both the historical data and the means to track the object and verify its identity electronically. Also, in contrast is the manufacturing philosophy in use today to make many memory devices. Today s methods involve many subtractive processes such as etching. This proposal only uses additive methods, building RFID and memory devices from the substrate up in thin layers. VAVD is capable of spraying silicon, copper, and other materials commonly used in electronic devices. The VAVD process sprays most metals and some ceramics. The material being sprayed has a very strong bond with the substrate, whether that substrate is metal, ceramic, or even wood, rock, glass, PVC, or paper. An object to be tagged with an identification device according to the proposal must be compatible with a vacuum deposition process. Temperature is seldom an issue as the substrate rarely reaches 150 F (66 C) during the deposition process. A portion of the surface of the object would be designated as a substrate for

  14. Dynamic surface tension measured with an integrated sensor-actuator device using electrolytically generated gas bubbles

    NARCIS (Netherlands)

    Olthuis, Wouter; Volanschi, Alex; Bergveld, Piet

    1997-01-01

    In this paper, a new, simple method to determine dynamic surface tension in aqueous solutions is reported, explained and experimentally verified. By function integration, a small device is obtained; apart from control and interface electronics no external components or systems are necessary. Instead

  15. Organic Materials for Time-Temperature Integrator Devices.

    Science.gov (United States)

    Cavallini, Massimiliano; Melucci, Manuela

    2015-08-12

    Time-temperature integrators (TTIs) are devices capable of recording the thermal history of a system. They have an enormous impact in the food and pharmaceutical industries. TTIs exploit several irreversible thermally activated transitions such as recrystallization, dewetting, smoothening, chemical decomposition, and polymorphic transitions, usually considered drawbacks for many technological applications. The aim of this article is to sensitize research groups working in organic synthesis and surface science toward TTI devices, enlarging the prospects of many new materials. We reviewed the principal applications highlighting the need and criticisms of TTIs, which offer a new opportunity for the development of many materials.

  16. Microfluidic-optical integrated CMOS compatible devices for label-free biochemical sensing

    Science.gov (United States)

    Blanco, F. J.; Agirregabiria, M.; Berganzo, J.; Mayora, K.; Elizalde, J.; Calle, A.; Dominguez, C.; Lechuga, L. M.

    2006-05-01

    The fabrication, characterization and packaging of novel microfluidic-optical integrated biosensors for label-free biochemical detection is presented in this paper. The integrated device consists of a three-dimensional embedded microchannel network fabricated using enhanced CMOS compatible SU-8 multilevel polymer technology on top of a wafer containing Mach-Zehnder Interferometer (MZI) nanophotonic biosensor devices. PMMA housing provides connection to the macro-world and ensures robust leakage-free flow operation of the devices. This macro-microfluidic module can operate at pressure drops up to 1000 kPa. Fluid flow experiments have been performed in order to demonstrate the robustness of our microfluidic devices. The devices have been designed to operate under continuous flow. Steady-state flow rates ranging from 1 to 100 µl min-1 at pressure drops ranging from 10 to 500 kPa were measured in the laminar flow regime. Experimental results are in good agreement with laminar flow theory. The first interferometric sensing measurements are presented in order to demonstrate the functionality of these novel integrated devices for lab-on-a-chip and label-free biosensing applications. A bulk refractive index detection limit of 3.8 × 10-6 was obtained, close to the minimum detected up to now by label-free biosensor devices without microfluidic integration. As far as we know, this is the first time that a label-free biosensor device is integrated within a microfluidic network using a wafer-level CMOS compatible process technology.

  17. Integration, aggregation and exchange of farming device data

    DEFF Research Database (Denmark)

    Iftikhar, Nadeem

    2009-01-01

    Most of the farming devices produce massive amounts of data. In most of the cases, it is necessary to store this data at a central location for further processing. Due to the huge volumes of data, strategies for data aggregation procedures are very important, in order to avoid oversized data sets....... There is also an increasing need to share or exchange data with other stack holders in the farming business based on farming standards. This paper presents an integrated, effective, easy-to-use and flexible solution, which enables the farmers to integrate data from several farming devices, aggregate data...... at different granularity levels and exchange data bi-directionally with other farming systems. The paper also describes the implementation strategy based on a case study using farming standards and open source technologies....

  18. Implementing quantum Fourier transform with integrated photonic devices

    Science.gov (United States)

    Tabia, Gelo Noel

    2014-03-01

    Many quantum algorithms that exhibit exponential speedup over their classical counterparts employ the quantum Fourier transform, which is used to solve interesting problems such as prime factorization. Meanwhile, nonclassical interference of single photons achieved on integrated platforms holds the promise of achieving large-scale quantum computation with multiport devices. An optical multiport device can be built to realize any quantum circuit as a sequence of unitary operations performed by beam splitters and phase shifters on path-encoded qudits. In this talk, I will present a recursive scheme for implementing quantum Fourier transform with a multimode interference photonic integrated circuit. Research at Perimeter Institute is supported by the Government of Canada through Industry Canada and by the Province of Ontario through the Ministry of Research and Innovation.

  19. A Sensor Middleware for integration of heterogeneous medical devices.

    Science.gov (United States)

    Brito, M; Vale, L; Carvalho, P; Henriques, J

    2010-01-01

    In this paper, the architecture of a modular, service-oriented, Sensor Middleware for data acquisition and processing is presented. The described solution was developed with the purpose of solving two increasingly relevant problems in the context of modern pHealth systems: i) to aggregate a number of heterogeneous, off-the-shelf, devices from which clinical measurements can be acquired and ii) to provide access and integration with an 802.15.4 network of wearable sensors. The modular nature of the Middleware provides the means to easily integrate pre-processing algorithms into processing pipelines, as well as new drivers for adding support for new sensor devices or communication technologies. Tests performed with both real and artificially generated data streams show that the presented solution is suitable for use both in a Windows PC or a Windows Mobile PDA with minimal overhead.

  20. Silicon integrated circuits advances in materials and device research

    CERN Document Server

    Kahng, Dawon

    1981-01-01

    Silicon Integrated Circuits, Part B covers the special considerations needed to achieve high-power Si-integrated circuits. The book presents articles about the most important operations needed for the high-power circuitry, namely impurity diffusion and oxidation; crystal defects under thermal equilibrium in silicon and the development of high-power device physics; and associated technology. The text also describes the ever-evolving processing technology and the most promising approaches, along with the understanding of processing-related areas of physics and chemistry. Physicists, chemists, an

  1. Light emitting devices based on Si nanoclusters: the integration with a photonic crystal and electroluminescence properties

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    We present the properties and potentialities of light emitting devices based on amorphous Si nanoclusters. Amorphous nanostructures may constitute an interesting alternative to Si nanocrystals for the monolithic integration of optical and electrical functions in Si technology. In fact, they exhibit an intense room temperature electroluminescence (EL). The EL properties of these devices have been studied as a function of current and of temperature. Moreover, to improve the extraction efficiency of the light, we have integrated the emitting system with a 2D photonic crystal structure opportunely fabricated by using conventional optical lithography to reduce the total internal reflection of the emitted light. The extraction efficiency in such devices increases by a factor of 4 at a resonance wavelength.

  2. Counting master integrals. Integration by parts vs. functional equations

    Energy Technology Data Exchange (ETDEWEB)

    Kniehl, Bernd A.; Tarasov, Oleg V. [Hamburg Univ. (Germany). II. Inst. fuer Theoretische Physik

    2016-01-15

    We illustrate the usefulness of functional equations in establishing relationships between master integrals under the integration-by-parts reduction procedure by considering a certain two-loop propagator-type diagram as an example.

  3. Integral operators and univalent functions

    Directory of Open Access Journals (Sweden)

    Kiah Wah Ong

    2012-06-01

    Full Text Available In this paper, we define two new integral operators $L^k$ and $L_k$ which are iterative in nature. We show that for $f(z=z+a_2z^2+ \\cdots +a_nz^n +\\cdots$ with radius of convergence larger than one, $L^kf(z$ and $L_kf(z$ when restricted on $E=\\{z:|z|<1\\}$ will eventually be univalent for large enough $k$. We then show that these are the best possible results by demonstrating that there exists a holomorphic function $T(z$ in normalized form and with radius of convergence equal to one such that $L^kT(z$ and $L_kT(z$ fail to be univalent when restricted to $E$ for every $k\\in \\mathbb{N}$.

  4. Nanoscale transfer printing for heterogeneous device integration (Conference Presentation)

    Science.gov (United States)

    Hurtado, Antonio; Guilhabert, Benoit J. E.; Strain, Michael J.; Laurand, Nicolas; Jagadish, Chennupati; Dawson, Martin D.

    2017-02-01

    We present a novel nanoscale transfer printing (TP) technology which combines a customized nanolithography system with bespoke elastomeric μ-stamps to controllably pick and place diverse semiconductor structures, e.g. nanowires (NWs), Light Emitting Diodes (LEDs) and thin films, onto targeted locations on heterogeneous material surfaces (e.g. polymers, metals, silica, diamond). Notably, our technique allows the parallel printing of semiconductor structures of different materials onto a large area (of 10cm x 10cm) whilst simultaneously yielding sub-micrometric positioning control (down to below 100nm) and low printing time ( 20s per print step). In the talk, we will present a variety of hybrid integrated devices fabricated with our TP technique. Emphasis will be given to our recent work using Gallium Nitride (GaN) LEDs and Indium Phosphide (InP) NW lasers as building blocks. Using TP protocols, GaN LEDs fabricated from GaN-on-Si have been integrated onto polymer and thin glass surfaces and onto diamond substrates for mechanically flexible optoelectronic devices and effective device heat management respectively. Additionally, ultra-small InP NW lasers ( 5μm long and 500nm diameter) have been integrated onto multiple heterogeneous substrates, including mechanically flexible (polymers), transparent (silica) and metallic (gold) surfaces. Furthermore, complex spatial patterns with micrometric dimensions have been defined with these nanolasers acting as localised emitters. Finally, we will also introduce our very recent results demonstrating the coupling of InP NW lasers with planar waveguide technology as a back-end hybrid integration technique.

  5. Microstructure Functional Devices-Effectively Manipulate Terahertz Waves

    Institute of Scientific and Technical Information of China (English)

    Fei Fan; Ji-Ning Li; Sai Chen; Sheng-Jiang Chang

    2014-01-01

    Terahertz (THz) technology promises important applications including imaging, spectroscopy, and communications. However, one of limitations at present for advancing THz applications is the lack of efficient devices to manipulate THz waves. Here, our recent important progresses in THz functional devices based on artificial microstructures, such as photonic crystal, metamaterial, and plasmonic structures, have been reviewed in this paper, involving the THz modulator, isolator, and sensor. These THz microstructure functional devices exhibit great promising potential in THz application systems.

  6. 76 FR 58041 - Certain Digital Televisions Containing Integrated Circuit Devices and Components Thereof; Notice...

    Science.gov (United States)

    2011-09-19

    ... COMMISSION Certain Digital Televisions Containing Integrated Circuit Devices and Components Thereof; Notice... certain digital televisions containing integrated circuit devices and components thereof by reason of... the sale within the United States after importation of certain digital televisions containing...

  7. Multilayer crack-free hybrid coatings for functional devices

    Science.gov (United States)

    Islam, Shumaila; Bidin, Noriah; Riaz, Saira; Naseem, Shahzad; Marsin Sanagi, Mohd.; Imran, M.

    2016-04-01

    Porous acid catalyzed TiO2 single, SiO2-TiO2 hybrid, and TiO2/SiO2-TiO2/SiO2 multilayer coatings are synthesized and characterized for optical and electro-optical applications. The reflection value is reasonably reduced from the surface of the glass by integrating sol-gel based spin-coated single and multilayer thin films. Structurally, the films show uniform, crack-free, and porous nanofilms with good surface roughness of below 10 nm, which has potential for optical applications. Wide range tunability of refractive index (2.83 to 1.59) with more than 78% optical transparency is observed. The multilayered reflection profile is observed around 0.18%, so these coatings are desirable for optochemical functional devices.

  8. GaAs integrated circuits and heterojunction devices

    Science.gov (United States)

    Fowlis, Colin

    1986-06-01

    The state of the art of GaAs technology in the U.S. as it applies to digital and analog integrated circuits is examined. In a market projection, it is noted that whereas analog ICs now largely dominate the market, in 1994 they will amount to only 39 percent vs. 57 percent for digital ICs. The military segment of the market will remain the largest (42 percent in 1994 vs. 70 percent today). ICs using depletion-mode-only FETs can be constructed in various forms, the closest to production being BFL or buffered FET logic. Schottky diode FET logic - a lower power approach - can reach higher complexities and strong efforts are being made in this direction. Enhancement type devices appear essential to reach LSI and VLSI complexity, but process control is still very difficult; strong efforts are under way, both in the U.S. and in Japan. Heterojunction devices appear very promising, although structures are fairly complex, and special fabrication techniques, such as molecular beam epitaxy and MOCVD, are necessary. High-electron-mobility-transistor (HEMT) devices show significant performance advantages over MESFETs at low temperatures. Initial results of heterojunction bipolar transistor devices show promise for high speed A/D converter applications.

  9. An arrayed accelerometer device of a wide range of detection for integrated CMOS-MEMS technology

    Science.gov (United States)

    Konishi, Toshifumi; Yamane, Daisuke; Matsushima, Takaaki; Masu, Kazuya; Machida, Katsuyuki; Toshiyoshi, Hiroshi

    2014-02-01

    This paper reports the design and experimental results of an arrayed accelerometer device in 3 × 3 format that can detect wide range of acceleration between 1G and 20G (1G = 9.8 m/s2). Implemented in a single chip has been performed by gold electroplating for integrated complementary metal oxide semiconductor-microelectromechanical systems (CMOS-MEMS) technology. An equivalent circuit of a MEMS accelerometer has been developed with an electrical circuit simulator to demonstrate the mixed-behavior of the arrayed sensor device and sensing CMOS circuits. Mechanical and electrical crosstalk between the arrayed elements is analyzed on the electrical field distributions. Experimental results show that the resonant frequency and readout capacitance as a function of applied acceleration have been well explained by the results of the multi-physics simulation. As a result, it is confirmed that the proposed device is applicable to an integrated CMOS-MEMS arrayed accelerometer.

  10. Integrated optoelectronic devices by selective-area epitaxy

    Science.gov (United States)

    Jones, A. M.; Coleman, James J.

    1997-01-01

    The development of a simulation model for selective-area epitaxy and the fabrication of semiconductor lasers monolithically integrated with electroabsorption modulators by this technique are presented. Diffusion equations and boundary conditions from selective-area MOCVD theory are applied in a computational model to predict column III reactant concentrations, and self-consistent solutions for reaction parameters are found using the finite element method. Data are presented to demonstrate accurate predictions of the thickness and composition of selectively grown ternary InGaAs quantum wells. This model was utilized to design the selective growth mask for Fabry-Perot lasers integrated with intracavity electroabsorption modulators. These devices, with modulator lengths of 290, 620, and 1020 micrometer, exhibit cw threshold currents of 9, 7.5, and 7.5 mA, respectively. Also, extinction ratios of 16.5, 19.5, and 20.5 dB, respectively, are measured at a modulator reverse bias of 2 V. Distributed Bragg reflector lasers with monolithically integrated external cavity modulators are also fabricated, and the selective-area MOCVD simulation was employed to design the growth mask dimensions and the location of the gratings. Cw threshold currents of 10.5 mA, slope efficiencies of 0.21 W/A, and extinction ratios of 18 dB at a modulator reverse bias of 1.0 V are achieved for these devices.

  11. Integrated Microfibre Device for Refractive Index and Temperature Sensing

    Directory of Open Access Journals (Sweden)

    Sulaiman W. Harun

    2012-08-01

    Full Text Available A microfibre device integrating a microfibre knot resonator in a Sagnac loop reflector is proposed for refractive index and temperature sensing. The reflective configuration of this optical structure offers the advantages of simple fabrication and ease of sensing. To achieve a balance between responsiveness and robustness, the entire microfibre structure is embedded in low index Teflon, except for the 0.5–2 mm diameter microfibre knot resonator sensing region. The proposed sensor has exhibited a linear spectral response with temperature and refractive index. A small change in free spectral range is observed when the microfibre device experiences a large refractive index change in the surrounding medium. The change is found to be in agreement with calculated results based on dispersion relationships.

  12. CMOS On-Chip Optoelectronic Neural Interface Device with Integrated Light Source for Optogenetics

    Science.gov (United States)

    Sawadsaringkarn, Y.; Kimura, H.; Maezawa, Y.; Nakajima, A.; Kobayashi, T.; Sasagawa, K.; Noda, T.; Tokuda, T.; Ohta, J.

    2012-03-01

    A novel optoelectronic neural interface device is proposed for target applications in optogenetics for neural science. The device consists of a light emitting diode (LED) array implemented on a CMOS image sensor for on-chip local light stimulation. In this study, we designed a suitable CMOS image sensor equipped with on-chip electrodes to drive the LEDs, and developed a device structure and packaging process for LED integration. The prototype device produced an illumination intensity of approximately 1 mW with a driving current of 2.0 mA, which is expected to be sufficient to activate channelrhodopsin (ChR2). We also demonstrated the functions of light stimulation and on-chip imaging using a brain slice from a mouse as a target sample.

  13. Semiconductor Devices Inspired By and Integrated With Biology

    Energy Technology Data Exchange (ETDEWEB)

    Rogers, John [University of Illinois

    2012-04-25

    Biology is curved, soft and elastic; silicon wafers are not. Semiconductor technologies that can bridge this gap in form and mechanics will create new opportunities in devices that adopt biologically inspired designs or require intimate integration with the human body. This talk describes the development of ideas for electronics that offer the performance of state-of-the-art, wafer- based systems but with the mechanical properties of a rubber band. We explain the underlying materials science and mechanics of these approaches, and illustrate their use in (1) bio- integrated, ‘tissue-like’ electronics with unique capabilities for mapping cardiac and neural electrophysiology, and (2) bio-inspired, ‘eyeball’ cameras with exceptional imaging properties enabled by curvilinear, Petzval designs.

  14. Image pixel device using integrated organic electronic components

    Science.gov (United States)

    Swathi, K.; Narayan, K. S.

    2016-11-01

    We report a solution processed, monolithically integrated device similar to an imaging pixel element used in complementary metal-oxide semiconductor (CMOS) based cameras. This integrated pixel essentially consists of a pair of organic photodiode (OPD) and organic field effect transistor (OFET). The signal generated by the light responsive OPD drives the OFET to different output states to quantify the light intensity. The prerequisite of a low operating voltage OFET (polymer semiconductor and a self-assembled hybrid dielectric layer. A bulk heterojunction blend was used as the photo-active layer in the OPD along with suitable buffer layers for charge extraction. The material parameters were optimized to realize a suitable structure which clearly demonstrated the interplay of the OPD and OFET operations, thereby forming a roadmap for all-organic CMOS arrays.

  15. A CMOS Integrated CC-ISFET Device for Water Quality Monitoring

    Directory of Open Access Journals (Sweden)

    Pawan Whig

    2012-07-01

    Full Text Available This study presents a performance analysis of low power CMOS Integrated Current Conveyor Ion Sensitive Field Effect transistor (CC-ISFET. The studys main focus is on simulation of power and performance analysis of ISFET device, which is used for water quality monitoring. This approach can improve calibration of device to a fairly wide range without the use of a high speed digital processor. The conventional devices generally used, consume high power and are not stable with temperature and frequency variations for long term monitoring. The conventional device [1] has a drawback of low value of slew rate, high power consumption, and non linear characteristics but in this novel design, the device exhibits a better slew rate, piece-wise linear characteristics, and seen consuming low power of the order of 5.7W. The functionality of the circuit is tested using Tanner simulator version 15 for a 70nm CMOS process model. Very high speed integrated circuit Hardware description language (VHDL code for the same scheme is simulated on Xilinx ISE 10.1 and various simulation results are obtained. The proposed circuit reduces total power consumption per cycle, increases speed of operation, fairly linear and is simple to implement.This device has a simple architecture, and hence is very suitable for water quality monitoring applications.

  16. An integrated microfludic device for culturing and screening of Giardia lamblia.

    Science.gov (United States)

    Zheng, Guo-Xia; Zhang, Xue-Mei; Yang, Yu-Suo; Zeng, Shu-Rui; Wei, Jun-Feng; Wang, Yun-Hua; Li, Ya-Jie

    2014-02-01

    In vitro culturing of trophozoites was important for research of Giardia lamblia (G. lamblia), especially in discovery of anti-Giardia agents. The current culture methods mainly suffer from lab-intension or the obstacle in standardizing the gas condition. Thus, it could benefit from a more streamlined and integrated approach. Microfluidics offers a way to accomplish this goal. Here we presented an integrated microfluidic device for culturing and screening of G. lamblia. The device consisted of a polydimethylsiloxane (PDMS) microchip with an aerobic culture system. In the microchip, the functionality of integrated concentration gradient generator (CGG) with micro-scale cell culture enables dose-response experiment to be performed in a simple and reagent-saving way. The diffusion-based culture chambers allowed growing G. lamblia at the in vivo like environment. It notable that the highly air permeable material of parallel chambers maintain uniform anaerobic environment in different chambers easily. Using this device, G. lamblia were successfully cultured and stressed on-chip. In all cases, a dose-related inhibitory response was detected. The application of this device for these purposes represents the first step in developing a completely integrated microfluidic platform for high-throughput screening and might be expanded to other assays based on in vitro culture of G. lamblia with further tests.

  17. Lithography for enabling advances in integrated circuits and devices.

    Science.gov (United States)

    Garner, C Michael

    2012-08-28

    Because the transistor was fabricated in volume, lithography has enabled the increase in density of devices and integrated circuits. With the invention of the integrated circuit, lithography enabled the integration of higher densities of field-effect transistors through evolutionary applications of optical lithography. In 1994, the semiconductor industry determined that continuing the increase in density transistors was increasingly difficult and required coordinated development of lithography and process capabilities. It established the US National Technology Roadmap for Semiconductors and this was expanded in 1999 to the International Technology Roadmap for Semiconductors to align multiple industries to provide the complex capabilities to continue increasing the density of integrated circuits to nanometre scales. Since the 1960s, lithography has become increasingly complex with the evolution from contact printers, to steppers, pattern reduction technology at i-line, 248 nm and 193 nm wavelengths, which required dramatic improvements of mask-making technology, photolithography printing and alignment capabilities and photoresist capabilities. At the same time, pattern transfer has evolved from wet etching of features, to plasma etch and more complex etching capabilities to fabricate features that are currently 32 nm in high-volume production. To continue increasing the density of devices and interconnects, new pattern transfer technologies will be needed with options for the future including extreme ultraviolet lithography, imprint technology and directed self-assembly. While complementary metal oxide semiconductors will continue to be extended for many years, these advanced pattern transfer technologies may enable development of novel memory and logic technologies based on different physical phenomena in the future to enhance and extend information processing.

  18. Extended device profiles and testing procedures for the approval process of integrated medical devices using the IEEE 11073 communication standard.

    Science.gov (United States)

    Janß, Armin; Thorn, Johannes; Schmitz, Malte; Mildner, Alexander; Dell'Anna-Pudlik, Jasmin; Leucker, Martin; Radermacher, Klaus

    2017-08-25

    Nowadays, only closed and proprietary integrated operating room systems (IORS) from big manufacturers are available on the market. Hence, the interconnection of components from third-party vendors is only possible with increased time and costs. In the context of the German Federal Ministry of Education and Research (BMBF)-funded project OR.NET (2012-2016), the open integration of medical devices from different manufacturers was addressed. An integrated operating theater based on the open communication standard IEEE 11073 shall give clinical operators the opportunity to choose medical devices independently of the manufacturer. This approach would be advantageous especially for hospital operators and small- and medium-sized enterprises (SME) of medical devices. Actual standards and concepts regarding technical feasibility and the approval process do not cope with the requirements for a modular integration of medical devices in the operating room (OR), based on an open communication standard. Therefore, innovative approval strategies and corresponding certification and test procedures, which cover actual legal and normative standards, have to be developed in order to support the future risk management and the usability engineering process of open integrated medical devices in the OR. The use of standardized device and service profiles and a three-step testing procedure, including conformity, interoperability and integration tests are described in this paper and shall support the manufacturers to integrate their medical devices without disclosing the medical devices' risk analysis and related confidential expertise or proprietary information.

  19. Indoor Navigation Design Integrated with Smart Phones and Rfid Devices

    Science.gov (United States)

    Ortakci, Y.; Demiral, E.; Atila, U.; Karas, I. R.

    2015-10-01

    High rise, complex and huge buildings in the cities are almost like a small city with their tens of floors, hundreds of corridors and rooms and passages. Due to size and complexity of these buildings, people need guidance to find their way to the destination in these buildings. In this study, a mobile application is developed to visualize pedestrian's indoor position as 3D in their smartphone and RFID Technology is used to detect the position of pedestrian. While the pedestrian is walking on his/her way on the route, smartphone will guide the pedestrian by displaying the photos of indoor environment on the route. Along the tour, an RFID (Radio-Frequency Identification) device is integrated to the system. The pedestrian will carry the RFID device during his/her tour in the building. The RFID device will send the position data to the server directly in every two seconds periodically. On the other side, the pedestrian will just select the destination point in the mobile application on smartphone and sent the destination point to the server. The shortest path from the pedestrian position to the destination point is found out by the script on the server. This script also sends the environment photo of the first node on the acquired shortest path to the client as an indoor navigation module.

  20. INDOOR NAVIGATION DESIGN INTEGRATED WITH SMART PHONES AND RFID DEVICES

    Directory of Open Access Journals (Sweden)

    Y. Ortakci

    2015-10-01

    Full Text Available High rise, complex and huge buildings in the cities are almost like a small city with their tens of floors, hundreds of corridors and rooms and passages. Due to size and complexity of these buildings, people need guidance to find their way to the destination in these buildings. In this study, a mobile application is developed to visualize pedestrian's indoor position as 3D in their smartphone and RFID Technology is used to detect the position of pedestrian. While the pedestrian is walking on his/her way on the route, smartphone will guide the pedestrian by displaying the photos of indoor environment on the route. Along the tour, an RFID (Radio-Frequency Identification device is integrated to the system. The pedestrian will carry the RFID device during his/her tour in the building. The RFID device will send the position data to the server directly in every two seconds periodically. On the other side, the pedestrian will just select the destination point in the mobile application on smartphone and sent the destination point to the server. The shortest path from the pedestrian position to the destination point is found out by the script on the server. This script also sends the environment photo of the first node on the acquired shortest path to the client as an indoor navigation module.

  1. An integrated semiconductor device enabling non-optical genome sequencing.

    Science.gov (United States)

    Rothberg, Jonathan M; Hinz, Wolfgang; Rearick, Todd M; Schultz, Jonathan; Mileski, William; Davey, Mel; Leamon, John H; Johnson, Kim; Milgrew, Mark J; Edwards, Matthew; Hoon, Jeremy; Simons, Jan F; Marran, David; Myers, Jason W; Davidson, John F; Branting, Annika; Nobile, John R; Puc, Bernard P; Light, David; Clark, Travis A; Huber, Martin; Branciforte, Jeffrey T; Stoner, Isaac B; Cawley, Simon E; Lyons, Michael; Fu, Yutao; Homer, Nils; Sedova, Marina; Miao, Xin; Reed, Brian; Sabina, Jeffrey; Feierstein, Erika; Schorn, Michelle; Alanjary, Mohammad; Dimalanta, Eileen; Dressman, Devin; Kasinskas, Rachel; Sokolsky, Tanya; Fidanza, Jacqueline A; Namsaraev, Eugeni; McKernan, Kevin J; Williams, Alan; Roth, G Thomas; Bustillo, James

    2011-07-20

    The seminal importance of DNA sequencing to the life sciences, biotechnology and medicine has driven the search for more scalable and lower-cost solutions. Here we describe a DNA sequencing technology in which scalable, low-cost semiconductor manufacturing techniques are used to make an integrated circuit able to directly perform non-optical DNA sequencing of genomes. Sequence data are obtained by directly sensing the ions produced by template-directed DNA polymerase synthesis using all-natural nucleotides on this massively parallel semiconductor-sensing device or ion chip. The ion chip contains ion-sensitive, field-effect transistor-based sensors in perfect register with 1.2 million wells, which provide confinement and allow parallel, simultaneous detection of independent sequencing reactions. Use of the most widely used technology for constructing integrated circuits, the complementary metal-oxide semiconductor (CMOS) process, allows for low-cost, large-scale production and scaling of the device to higher densities and larger array sizes. We show the performance of the system by sequencing three bacterial genomes, its robustness and scalability by producing ion chips with up to 10 times as many sensors and sequencing a human genome.

  2. Integrating the results of user research into medical device development: insights from a case study

    Directory of Open Access Journals (Sweden)

    Martin Jennifer L

    2012-07-01

    Full Text Available Abstract Background It is well established that considering users is an important aspect of medical device development. However it is also well established that there are numerous barriers to successfully conducting user research and integrating the results into product development. It is not sufficient to simply conduct user research, it must also be effectively integrated into product development. Methods A case study of the development of a new medical imaging device was conducted to examine in detail how users were involved in a medical device development project. Two user research studies were conducted: a requirements elicitation interview study and an early prototype evaluation using contextual inquiry. A descriptive in situ approach was taken to investigate how these studies contributed to the product development process and how the results of this work influenced the development of the technology. Data was collected qualitatively through interviews with the development team, participant observation at development meetings and document analysis. The focus was on investigating the barriers that exist to prevent user data from being integrated into product development. Results A number of individual, organisational and system barriers were identified that functioned to prevent the results of the user research being fully integrated into development. The user and technological aspects of development were seen as separate work streams during development. The expectations of the developers were that user research would collect requirements for the appearance of the device, rather than challenge its fundamental concept. The manner that the user data was communicated to the development team was not effective in conveying the significance or breadth of the findings. Conclusion There are a range of informal and formal organisational processes that can affect the uptake of user data during medical device development. Adopting formal decision

  3. Integrating the results of user research into medical device development: insights from a case study.

    Science.gov (United States)

    Martin, Jennifer L; Barnett, Julie

    2012-07-19

    It is well established that considering users is an important aspect of medical device development. However it is also well established that there are numerous barriers to successfully conducting user research and integrating the results into product development. It is not sufficient to simply conduct user research, it must also be effectively integrated into product development. A case study of the development of a new medical imaging device was conducted to examine in detail how users were involved in a medical device development project. Two user research studies were conducted: a requirements elicitation interview study and an early prototype evaluation using contextual inquiry. A descriptive in situ approach was taken to investigate how these studies contributed to the product development process and how the results of this work influenced the development of the technology. Data was collected qualitatively through interviews with the development team, participant observation at development meetings and document analysis. The focus was on investigating the barriers that exist to prevent user data from being integrated into product development. A number of individual, organisational and system barriers were identified that functioned to prevent the results of the user research being fully integrated into development. The user and technological aspects of development were seen as separate work streams during development. The expectations of the developers were that user research would collect requirements for the appearance of the device, rather than challenge its fundamental concept. The manner that the user data was communicated to the development team was not effective in conveying the significance or breadth of the findings. There are a range of informal and formal organisational processes that can affect the uptake of user data during medical device development. Adopting formal decision making processes may assist manufacturers to take a more integrated and

  4. Efifcient Methods for Approaching Functional Safety to Hardware Systems of Medical Devices

    Institute of Scientific and Technical Information of China (English)

    KIMGi-young; WANGDa-wei; PARKHo-joon; JANG Joong-soon

    2015-01-01

    A medical device is an instrument that includes components, parts, or accessories to diagnose or treat patients. Since the complexity of medical devices has increased in recent years, functional safety and basic safety are required to ensure the overall device safety. Functional safety is part of the overall safety that relates to the equipment under control (EUC) and to the EUC control system that depends on the correct functionality of the electrical/electronic/programmable electronic (E/E/PE) safety-related systems. This study proposes approach methods to functional safety of medical devices for which it is important to correctly identify the safety functions and the safety integrity level (SIL). The relationship between the functional safety and essential performance is identiifed focusing on the safety function. The essential performance of E/E/PE systems is deifned as the safety function of the functional safety. The target SIL of the essential performance is determined according to the potential risk levels, based on the classiifcation rules of medical devices. This approach is applied to the pulse oximeter as a case study. The target SIL for the functionality of the power-failure alarm condition is determined to be SIL1. The target SILs of other functions are determined as SIL2.

  5. Integrated optic devices based on nonlinear optical polymers

    Science.gov (United States)

    van Tomme, Emmanuel; van Daele, Peter P.; Baets, Roel G.; Lagasse, Paul E.

    1991-03-01

    An examination is made of the state of the art of nonlinear optical polymeric materials in view of their potential advantages. It is shown that these organic materials have many attractive features compared to LiNbO3 and III-V semiconductors with regard to their use in integrated optic circuits, especially since the level of integration is ever increasing. Considering more specifically electro-optic devices, a description is given of some of the theoretical background and basic properties. These polymers have already demonstrated a very high and extremely fast electro-optic effect compared to LiNbO3. It is also shown how low-loss waveguides can be fabricated by using easy techniques such as direct UV bleaching. The performance of phase modulators, Mach-Zehnder interferometers, and 2 x 2 space switches built with such polymers is already very promising. The results described in this study indicate a rapid rate of progress made by this technology, and one can expect that polymers in general and NLO polymers in particular will play an increasingly important role in integrated optics.

  6. Integration of the Quadratic Function and Generalization

    Science.gov (United States)

    Mitsuma, Kunio

    2011-01-01

    We will first recall useful formulas in integration that simplify the calculation of certain definite integrals with the quadratic function. A main formula relies only on the coefficients of the function. We will then explore a geometric proof of one of these formulas. Finally, we will extend the formulas to more general cases. (Contains 3…

  7. Single-molecule electronics: from chemical design to functional devices.

    Science.gov (United States)

    Sun, Lanlan; Diaz-Fernandez, Yuri A; Gschneidtner, Tina A; Westerlund, Fredrik; Lara-Avila, Samuel; Moth-Poulsen, Kasper

    2014-11-07

    The use of single molecules in electronics represents the next limit of miniaturisation of electronic devices, which would enable us to continue the trend of aggressive downscaling of silicon-based electronic devices. More significantly, the fabrication, understanding and control of fully functional circuits at the single-molecule level could also open up the possibility of using molecules as devices with novel, not-foreseen functionalities beyond complementary metal-oxide semiconductor technology (CMOS). This review aims at highlighting the chemical design and synthesis of single molecule devices as well as their electrical and structural characterization, including a historical overview and the developments during the last 5 years. We discuss experimental techniques for fabrication of single-molecule junctions, the potential application of single-molecule junctions as molecular switches, and general physical phenomena in single-molecule electronic devices.

  8. [Study on an Exoskeleton Hand Function Training Device].

    Science.gov (United States)

    Hu, Xin; Zhang, Ying; Li, Jicai; Yi, Jinhua; Yu, Hongliu; He, Rongrong

    2016-02-01

    Based on the structure and motion bionic principle of the normal adult fingers, biological characteristics of human hands were analyzed, and a wearable exoskeleton hand function training device for the rehabilitation of stroke patients or patients with hand trauma was designed. This device includes the exoskeleton mechanical structure and the electromyography (EMG) control system. With adjustable mechanism, the device was capable to fit different finger lengths, and by capturing the EMG of the users' contralateral limb, the motion state of the exoskeleton hand was controlled. Then driven by the device, the user's fingers conducting adduction/abduction rehabilitation training was carried out. Finally, the mechanical properties and training effect of the exoskeleton hand were verified through mechanism simulation and the experiments on the experimental prototype of the wearable exoskeleton hand function training device.

  9. Functionalized graphene and other two-dimensional materials for photovoltaic devices: device design and processing.

    Science.gov (United States)

    Liu, Zhike; Lau, Shu Ping; Yan, Feng

    2015-08-07

    Graphene is the thinnest two-dimensional (2D) carbon material and has many advantages including high carrier mobilities and conductivity, high optical transparency, excellent mechanical flexibility and chemical stability, which make graphene an ideal material for various optoelectronic devices. The major applications of graphene in photovoltaic devices are for transparent electrodes and charge transport layers. Several other 2D materials have also shown advantages in charge transport and light absorption over traditional semiconductor materials used in photovoltaic devices. Great achievements in the applications of 2D materials in photovoltaic devices have been reported, yet numerous challenges still remain. For practical applications, the device performance should be further improved by optimizing the 2D material synthesis, film transfer, surface functionalization and chemical/physical doping processes. In this review, we will focus on the recent advances in the applications of graphene and other 2D materials in various photovoltaic devices, including organic solar cells, Schottky junction solar cells, dye-sensitized solar cells, quantum dot-sensitized solar cells, other inorganic solar cells, and perovskite solar cells, in terms of the functionalization techniques of the materials, the device design and the device performance. Finally, conclusions and an outlook for the future development of this field will be addressed.

  10. A design approach for integrating thermoelectric devices using topology optimization

    DEFF Research Database (Denmark)

    Soprani, Stefano; Haertel, Jan Hendrik Klaas; Lazarov, Boyan Stefanov;

    2016-01-01

    to operate more efficiently. This work proposes and experimentally demonstrates a topology optimization approach as a design tool for efficient integration of thermoelectric modules into systems with specific design constraints. The approach allows thermal layout optimization of thermoelectric systems....... The design method incorporates temperature dependent properties of the thermoelectric device and other materials. The3D topology optimization model developed in this work was used to design a thermoelectric system, complete with insulation and heat sink, that was produced and tested. Good agreement between...... experimental results and model forecasts was obtained and the system was able to maintain the load at more than 33 K below the oil well temperature. Results of this study support topology optimizationas a powerful design tool for thermal design of thermoelectric systems....

  11. DEPFET--a pixel device with integrated amplification

    CERN Document Server

    Neeser, W; Buchholz, P; Fischer, P; Holl, P; Kemmer, J; Klein, P; Koch, H; Löcker, M; Lutz, Gerhard; Matthäy, H; Strüder, L; Trimpl, M; Ulrici, J; Wermes, N

    2002-01-01

    In the DEPFET pixel concept, the absorbed radiation directly modulates the channel current of a p-JFET transistor being integrated into a fully depleted high ohmic silicon substrate in every pixel cell, offering very low noise operation at room temperature. Hence, DEPFET pixels open new possibilities in biomedical applications, but also have a potential in particle physics and astrophysics. Second prototype 50 mu mx50 mu m single pixels as well as large (64x64) DEPFET matrices have been successfully produced and operated confirming the low noise behavior (12e). Device studies as well as a full DEPFET pixel Bioscope system to be used in real-time digital autoradiography with excellent spatial and energy resolution for X-rays are presented.

  12. Integration of Nanostructures into Microsensor Devices on Whole Wafers

    Science.gov (United States)

    Biaggi-Labiosa, Azlin M.; Evans, Laura J.; Berger, Gordon M.; Hunter, Gary W.

    2015-01-01

    Chemical sensors are used in a wide variety of applications, such as environmental monitoring, fire detection, emission monitoring, and health monitoring. The fabrication of chemical sensors involving nanostructured materials holds the potential for the development of sensor systems with unique properties and improved performance. However, the fabrication and processing of nanostructures for sensor applications currently are limited in the ability to control their location on the sensor, which in turn hinders the progress for batch fabrication. This report discusses the advantages of using nanomaterials in sensor designs, some of the challenges encountered with the integration of nanostructures into microsensor / devices, and then briefly describes different methods attempted by other groups to address this issue. Finally, this report will describe how our approach for the controlled alignment of nanostructures onto a sensor platform was applied to demonstrate an approach for the mass production of sensors with nanostructures.

  13. Performance of a Thermoelectric Device with Integrated Heat Exchangers

    Science.gov (United States)

    Barry, Matthew M.; Agbim, Kenechi A.; Chyu, Minking K.

    2015-06-01

    Thermoelectric devices (TEDs) convert heat directly into electrical energy, making them well suited for waste heat recovery applications. An integrated thermoelectric device (iTED) is a restructured TED that allows more heat to enter the p-n junctions, thus producing a greater power output . An iTED has heat exchangers incorporated into the hot-side interconnectors with flow channels directing the working fluid through the heat exchangers. The iTED was constructed of p- and n-type bismuth-telluride semiconductors and copper interconnectors and rectangular heat exchangers. The performance of the iTED in terms of , produced voltage and current , heat input and conversion efficiency for various flow rates (), inlet temperatures (C) ) and load resistances () with a constant cold-side temperature ( = 0C) was conducted experimentally. An increase in had a greater effect on the performance than did an increase in . A 3-fold increase in resulted in a 3.2-, 3.1-, 9.7-, 3.5- and 2.8-fold increase in and respectively. For a constant of 50C, a 3-fold increase in from 3300 to 9920 resulted in 1.6-, 1.6-, 2.6-, 1.5- and 1.9-fold increases in , , , and respectively.

  14. Power spectrum analysis for defect screening in integrated circuit devices

    Science.gov (United States)

    Tangyunyong, Paiboon; Cole Jr., Edward I.; Stein, David J.

    2011-12-01

    A device sample is screened for defects using its power spectrum in response to a dynamic stimulus. The device sample receives a time-varying electrical signal. The power spectrum of the device sample is measured at one of the pins of the device sample. A defect in the device sample can be identified based on results of comparing the power spectrum with one or more power spectra of the device that have a known defect status.

  15. Effective piezoelectric response of substrate-integrated ZnO nanowire array devices on galvanized steel.

    Science.gov (United States)

    Velazquez, By Jesus M; Baskaran, Sivapalan; Gaikwad, Anil V; Ngo-Duc, Tam-Triet; He, Xiangtong; Oye, Michael M; Meyyappan, M; Rout, Tapan K; Fu, John Y; Banerjee, Sarbajit

    2013-11-13

    Harvesting waste energy through electromechanical coupling in practical devices requires combining device design with the development of synthetic strategies for large-area controlled fabrication of active piezoelectric materials. Here, we show a facile route to the large-area fabrication of ZnO nanostructured arrays using commodity galvanized steel as the Zn precursor as well as the substrate. The ZnO nanowires are further integrated within a device construct and the effective piezoelectric response is deduced based on a novel experimental approach involving induction of stress in the nanowires through pressure wave propagation along with phase-selective lock-in detection of the induced current. The robust methodology for measurement of the effective piezoelectric coefficient developed here allows for interrogation of piezoelectric functionality for the entire substrate under bending-type deformation of the ZnO nanowires.

  16. Silicon based tunneling devices combined with silicon-on-insulator for ultra-large-scale integration

    Science.gov (United States)

    Aydin, Cagri

    2005-07-01

    The continuing device miniaturization in silicon technology to the nanoscale regime opens new avenues for Si-integrable quantum tunneling devices. This thesis describes our study of three novel Si-based tunneling devices: The multiemitter tunneling heterojunction bipolar transistor (MT-HBT), the lateral interband tunneling transistor (LITT) and the ultrathin silicon-on-insulator (SOI) vertical tunneling transistor (VTT). In the Si/SiGe npn MT-HBT, interband tunneling in a heavily doped, reverse biased emitter-base junction supplies the controlling current, while the other forward biased emitter injects the collector current. Despite the lack of a true base contact, the device operates as a normal HBT with high current gain, and the emitter symmetry leads to logic functionality in a single device. Interband tunneling in silicon, which has an indirect bandgap, requires momentum transfer from either phonons or impurities and is not well understood---our devices provide an experimental testbed for existing theory. Interband tunneling is, again, the underlying principle of our LITT devices, where the source and drain form a heavily-doped lateral pn junction in a thin Si film on an SOI substrate. We observe control of the reverse-bias tunneling current under drain bias by a gate voltage of either bias polarity. Systematic current-voltage measurements, together with numerical device simulations, show that in first approximation the drain current depends on the maximum junction electric field. The VTT in SOI is a resonant tunneling device in a transistor geometry: carriers tunnel from the doped gate through an ultrathin gate oxide into the Si quantum well channel and are extracted laterally. The devices show good transistor characteristics when operated in standard transistor mode, and backgate modulation of the tunneling current when operated in the vertical tunneling mode at low temperature. In particular, we observe structure in the gate current due to resonant

  17. Integration of functional complex oxide nanomaterials on silicon

    Directory of Open Access Journals (Sweden)

    Jose Manuel eVila-Fungueiriño

    2015-06-01

    Full Text Available The combination of standard wafer-scale semiconductor processing with the properties of functional oxides opens up to innovative and more efficient devices with high value applications that can be produced at large scale. This review uncovers the main strategies that are successfully used to monolithically integrate functional complex oxide thin films and nanostructures on silicon: the chemical solution deposition approach (CSD and the advanced physical vapor deposition techniques such as oxide molecular beam epitaxy (MBE. Special emphasis will be placed on complex oxide nanostructures epitaxially grown on silicon using the combination of CSD and MBE. Several examples will be exposed, with a particular stress on the control of interfaces and crystallization mechanisms on epitaxial perovskite oxide thin films, nanostructured quartz thin films, and octahedral molecular sieve nanowires. This review enlightens on the potential of complex oxide nanostructures and the combination of both chemical and physical elaboration techniques for novel oxide-based integrated devices.

  18. A Visual Interface Diagram For Mapping Functions In Integrated Products

    DEFF Research Database (Denmark)

    Ingerslev, Mattias; Oliver Jespersen, Mikkel; Göhler, Simon Moritz

    2015-01-01

    of visualizing relations between parts and functions in highly integrated mechanical products. The result is an interface diagram that supports design teams in communication, decision making and design management. The diagram gives the designer an overview of the couplings and dependencies within a product......In product development there is a recognized tendency towards increased functionality for each new product generation. This leads to more integrated and complex products, with the risk of development delays and quality issues as a consequence of lacking overview and transparency. The work described...... in this article has been conducted in collaboration with Novo Nordisk on the insulin injection device FlexTouch® as case product. The FlexTouch® reflects the characteristics of an integrated product with several functions shared between a relatively low number of parts. In this article we present a novel way...

  19. 77 FR 25747 - Certain Semiconductor Integrated Circuit Devices and Products Containing Same; Institution of...

    Science.gov (United States)

    2012-05-01

    ... COMMISSION Certain Semiconductor Integrated Circuit Devices and Products Containing Same; Institution of... the sale within the United States after importation of certain semiconductor integrated circuit... semiconductor integrated circuit devices and products containing same that infringe one or more of claims 1,...

  20. Defining Integrals Over Connections in the Discretized Gravitational Functional Integrals

    Science.gov (United States)

    Khatsymovsky, V. M.

    Integration over connection type variables in the path integral for the discrete form of the first-order formulation of general relativity theory is studied. The result (a generalized function of the rest of variables of the type of tetrad or elementary areas) can be defined through its moments, i.e. integrals of it with the area tensor monomials. In our previous paper these moments have been defined by deforming integration contours in the complex plane as if we had passed to a Euclidean-like region. In this paper we define and evaluate the moments in the genuine Minkowski region. The distribution of interest resulting from these moments in this non-positively defined region contains the divergences. We prove that the latter contribute only to the singular (δ-function like) part of this distribution with support in the non-physical region of the complex plane of area tensors while in the physical region this distribution (usual function) confirms that defined in our previous paper which decays exponentially at large areas. Besides that, we evaluate the basic integrals over which the integral over connections in the general path integral can be expanded.

  1. Medical device integration: CIOs must bridge the digital divide between devices and electronic medical records.

    Science.gov (United States)

    Raths, David

    2009-02-01

    To get funding approved for medical device integration, ClOs suggest focusing on specific patient safety or staff efficiency pain points. Organizations that make clinical engineering part of their IT team report fewer chain-of-command issues. It also helps IT people understand the clinical goals because the engineering people have been working closely with clinicians for years. A new organization has formed to work on collaboration between clinical engineers and IT professionals. For more information, go to www.ceitcollaboration.org. ECRI Institute has written a guide to handling the convergence of medical technology and hospital networks. Its "Medical Technology for the IT Professional: An Essential Guide for Working in Today's Healthcare Setting" also details how IT professionals can assist hospital technology planning and acquisition, and provide ongoing support for IT-based medical technologies. For more information, visit www.ecri.org/ITresource.

  2. SEMICONDUCTOR DEVICES: A new integrated SOI power device based on self-isolation technology

    Science.gov (United States)

    Huanmei, Gao; Xiaorong, Luo; Wei, Zhang; Hao, Deng; Tianfei, Lei

    2010-08-01

    A new SOI LDMOS structure with buried n-islands (BNIs) on the top interface of the buried oxide (BOX) is presented in a p-SOI high voltage integrated circuits (p-SOI HVICs), which exhibits good self-isolation performance between the power device and low-voltage control circuits. Furthermore, both the donor ions of BNIs and holes collected between depleted n-islands not only enhance the electric field in BOX from 32 to 113 V/μm, but also modulate the lateral electric field distribution, resulting in an improvement of the breakdown voltage of the BNI SOI LDMOS. A 673 V BNI SOI LDMOS is experimentally obtained and presents an excellent self-isolation performance in a p-SOI HVIC.

  3. Some integral inequalities for logarithmically convex functions

    Directory of Open Access Journals (Sweden)

    Mevlüt Tunç

    2014-07-01

    Full Text Available The main aim of the present note is to establish new Hadamard like integral inequalities involving log-convex function. We also prove some Hadamard-type inequalities, and applications to the special means are given.

  4. Adult neurogenesis: integrating theories and separating functions

    OpenAIRE

    2010-01-01

    The continuous incorporation of new neurons in the dentate gyrus of the adult hippocampus raises exciting questions about memory and learning, and has inspired new computational models to understand the function of adult neurogenesis. These theoretical approaches suggest distinct roles for new neurons as they slowly integrate into the existing dentate gyrus network: immature adult-born neurons appear to function as pattern integrators of temporally adjacent events, thereby enhancing pattern s...

  5. ZEROES OF GENERALIZED FRESNEL COMPLEMENTARY INTEGRAL FUNCTIONS

    Directory of Open Access Journals (Sweden)

    Jaime Lobo Segura

    2016-08-01

    Full Text Available Theoretical upper and lower bounds are established for zeroes of a parametric family of functions which are defined by integrals of the same type as the Fresnel complementary integral. Asymptotic properties for these bounds are obtained as well as monotony properties of the localization intervals. Given the value of the parameter an analytical-numerical procedure is deduced to enclose all zeros of a given function with an a priori error.

  6. Integrated ion sensor device applications based on printed hybrid material systems (Conference Presentation)

    Science.gov (United States)

    List-Kratochvil, Emil J. W.

    2016-09-01

    Comfortable, wearable sensors and computers will enhance every person's awareness of his or her health condition, environment, chemical pollutants, potential hazards, and information of interest. In agriculture and in the food industry there is a need for a constant control of the condition and needs of plants, animals, and farm products. Yet many of these applications depend upon the development of novel, cheap devices and sensors that are easy to implement and to integrate. Organic semiconductors as well as several inorganic materials and hybrid material systems have proven to combine a number of intriguing optical and electronic properties with simple processing methods. As it will be reviewed in this contribution, these materials are believed to find their application in printed electronic devices allowing for the development of smart disposable devices in food-, health-, and environmental monitoring, diagnostics and control, possibly integrated into arrays of sensor elements for multi-parameter detection. In this contribution we review past and recent achievements in the field. Followed by a brief introduction, we will focus on two topics being on the agenda recently: a) the use of electrolyte-gated organic field-effect transistor (EGOFET) and ion-selective membrane based sensors for in-situ sensing of ions and biological substances and b) the development of hybrid material based resistive switches and their integration into fully functional, printed hybrid crossbar sensor array structures.

  7. Design and Experimental Investigation of a Compact Circularly Polarized Integrated Filtering Antenna for Wearable Biotelemetric Devices.

    Science.gov (United States)

    Jiang, Zhi Hao; Gregory, Micah D; Werner, Douglas H

    2016-04-01

    A compact circularly polarized (CP) integrated filtering antenna is reported for wearable biotelemetric devices in the 2.4 GHz ISM band. The design is based on a mutual synthesis of a CP patch antenna connected to a bandpass filter composed of coupled stripline open-loop resonators, which provides an integrated low-profile radiating and filtering module with a compact form factor of 0.44λ(0)×0.44λ(0)×0.04λ(0). The optimized filtering antenna is fabricated and measured, achieving an S11 wearable antenna for off-body communications. The additional integrated filtering functionality further improves utility by greatly reducing interference and crosstalk with other existing wireless systems.

  8. Organic photovoltaic devices with colloidal TiO2 nanorods as key functional components.

    Science.gov (United States)

    Loiudice, Anna; Rizzo, Aurora; De Marco, Luisa; Belviso, Maria R; Caputo, Gianvito; Cozzoli, P Davide; Gigli, Giuseppe

    2012-03-21

    We report on a novel approach to integrate colloidal anatase TiO(2) nanorods as key functional components into polymer bulk heterojunction (BHJ) photovoltaic devices by means of mild, all-solution-based processing techniques. The successful integration of colloidal nanoparticles in organic solar cells relies on the ability to remove the long chain insulating ligands, which indeed severely reduces the charge transport. To this aim we have exploited the concomitant mechanisms of UV-light-driven photocatalytic removal of adsorbed capping ligands and hydrophilicization of TiO(2) surfaces in both solid-state and liquid-phase conditions. We have demonstrated the successful integration of the UV-irradiated films and colloidal solutions of TiO(2) nanorods in inverted and conventional solar cell geometries, respectively. The inverted devices show a power conversion efficiency of 2.3% that is a ca. three times improvement over their corresponding cell counterparts incorporating untreated TiO(2), demonstrating the excellent electron-collecting property of the UV-irradiated TiO(2) films. The integration of UV-treated TiO(2) solutions in conventional devices results in doubled power conversion efficiency for the thinner active layer and in maximum power conversion efficiency of 2.8% for 110 nm thick devices. In addition, we have demonstrated, with the support of device characterizations and optical simulations, that the TiO(2) nanocrystal buffer layer acts both as electron-transporting/hole-blocking material and optical spacer.

  9. 77 FR 39510 - Certain Semiconductor Integrated Circuit Devices and Products Containing Same; Determination Not...

    Science.gov (United States)

    2012-07-03

    ... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Certain Semiconductor Integrated Circuit Devices and Products Containing Same; Determination Not... the sale within the United States after importation of certain semiconductor integrated...

  10. Integration of augmented reality and assistive devices for post-stroke hand opening rehabilitation.

    Science.gov (United States)

    Luo, Xun; Kline, Tiffany; Fischer, Heidi; Stubblefield, Kathy; Kenyon, Robert; Kamper, Derek

    2005-01-01

    Impairment of hand function is prevalent among stroke survivors, motivating the search for effective rehabilitation therapy. Recent studies have suggested that for upper extremity functional recovery, repetitive training with virtual reality is helpful. Repetitive training can be facilitated with assistance from mechanical devices. Thus, we have developed a training environment that integrates augmented reality (AR) with assistive devices for post-stroke hand rehabilitation. The AR element of our environment utilizes head mounted display and virtual objects for reach-and-grasp task training. The assistive device consists of either a body-powered orthosis (BPO) or a pneumatic-powered device (PPD), both of which are incorporated into gloves. This environment can be easily set up and calibrated, is customizable for individual users, and requires active user participation. Additionally, it can be used with both real and virtual objects, as desired. We are currently conducting pilot case studies to assess ease of use and efficacy. At present, one stroke survivor from each of the three training conditions, AR-with-BPO, AR-with-PPD and AR-only (acting as the control), has completed the 6-week training paradigm. Preliminary findings suggest user acceptance of the technology and some potential for beneficial effects.

  11. Functional nanomaterials and devices for electronics, sensors and energy harvesting

    CERN Document Server

    Balestra, Francis; Kilchytska, Valeriya; Flandre, Denis

    2014-01-01

    This book contains reviews of recent experimental and theoretical results related to nanomaterials. It focuses on novel functional materials and nanostructures in combination with silicon on insulator (SOI) devices, as well as on the physics of new devices and sensors, nanostructured materials and nano scaled device characterization. Special attention is paid to fabrication and properties of modern low-power, high-performance, miniaturized, portable sensors in a wide range of applications such as telecommunications, radiation control, biomedical instrumentation and chemical analysis. In this book, new approaches exploiting nanotechnologies (such as UTBB FD SOI, Fin FETs, nanowires, graphene or carbon nanotubes on dielectric) to pave a way between “More Moore” and “More than Moore” are considered, in order to create different kinds of sensors and devices which will consume less electrical power, be more portable and totally compatible with modern microelectronics products.

  12. A Study of Functional Simulation for reliability of the device design

    Energy Technology Data Exchange (ETDEWEB)

    Park, Hee Seong; Lee, Jae Won; Park, Seung Kook; Moon, Jei kwon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-05-15

    The head-end process plays an important role in providing feed materials to electrolytic reduction after fabrication of the fuel fragments (crushed pellets) and the porous pellets feed materials. The head-end process is composed of various devices such as disassembling/rod extraction/rod cutting devices of the nuclear fuel assembly, oxidative decladding device, compaction, and pre-treatment device. The head-end process project currently has no hotcell. In addition, there are no tools validate core devices designed or manufactured. This paper introduces a head-end process fDMU (Functional DMU) being developed to solve this problem. To establish the efficiency and reliability of core devices based on a previous DMU environment, an advanced fDMU for the head-end process was designed. It was concluded that fDMU has great features such as a functional integration and validation of virtual mechatronic systems, couple the functional and geometry models within the total system model, and combine the functional simulation and interactive 3D visualization.

  13. Activated-Carbon Sorbent With Integral Heat-Transfer Device

    Science.gov (United States)

    Jones, Jack A.; Yavrouian, Andre

    1996-01-01

    Prototype adsorption device used, for example, in adsorption heat pump, to store natural gas to power automobile, or to separate components of fluid mixtures. Device includes activated carbon held together by binder and molded into finned heat-transfer device providing rapid heating or cooling to enable rapid adsorption or desorption of fluids. Concepts of design and fabrication of device equally valid for such other highly thermally conductive devices as copper-finned tubes, and for such other high-surface-area sorbents as zeolites or silicates.

  14. Hypergeometric Functions with Integral Parameter Differences

    DEFF Research Database (Denmark)

    Karlsson, Per W.

    1971-01-01

    For a generalized hypergeometric function pFq(z) with positive integral differences between certain numerator and denominator parameters, a formula expressing the pFq(z) as a finite sum of lower-order functions is proved. From this formula, Minton's two summation theorems for p = q + 1, z = 1...

  15. Integral transform techniques for Green's function

    CERN Document Server

    Watanabe, Kazumi

    2015-01-01

    This book describes mathematical techniques for integral transforms in a detailed but concise manner. The techniques are subsequently applied to the standard partial differential equations, such as the Laplace equation, the wave equation and elasticity equations. Green’s functions for beams, plates and acoustic media are also shown, along with their mathematical derivations. The Cagniard-de Hoop method for double inversion is described in detail, and 2D and 3D elastodynamic problems are treated in full. This new edition explains in detail how to introduce the branch cut for the multi-valued square root function. Further, an exact closed form Green’s function for torsional waves is presented, as well as an application technique of the complex integral, which includes the square root function and an application technique of the complex integral.

  16. Technology Integration: Mobile Devices (iPods), Constructivist Pedagogy, and Student Learning

    Science.gov (United States)

    Keengwe, Jared; Pearson, Donna; Smart, Kathy

    2009-01-01

    Although mobile technology is still evolving with most mobile devices supporting numerous communications and technology standards, there are currently very few applications of these devices to support teaching and learning activities. Integrated appropriately, mobile devices could help students acquire the skills needed to survive in a complex,…

  17. Experimental Device for Learning of Logical Circuit Design using Integrated Circuits

    OpenAIRE

    石橋, 孝昭

    2012-01-01

    This paper presents an experimental device for learning of logical circuit design using integrated circuits and breadboards. The experimental device can be made at a low cost and can be used for many subjects such as logical circuits, computer engineering, basic electricity, electrical circuits and electronic circuits. The proposed device is effective to learn the logical circuits than the usual lecture.

  18. Novel developments in mobile sensing based on the integration of microfluidic devices and smartphones.

    Science.gov (United States)

    Yang, Ke; Peretz-Soroka, Hagit; Liu, Yong; Lin, Francis

    2016-03-21

    Portable electronic devices and wireless communication systems enable a broad range of applications such as environmental and food safety monitoring, personalized medicine and healthcare management. Particularly, hybrid smartphone and microfluidic devices provide an integrated solution for the new generation of mobile sensing applications. Such mobile sensing based on microfluidic devices (broadly defined) and smartphones (MS(2)) offers a mobile laboratory for performing a wide range of bio-chemical detection and analysis functions such as water and food quality analysis, routine health tests and disease diagnosis. MS(2) offers significant advantages over traditional platforms in terms of test speed and control, low cost, mobility, ease-of-operation and data management. These improvements put MS(2) in a promising position in the fields of interdisciplinary basic and applied research. In particular, MS(2) enables applications to remote in-field testing, homecare, and healthcare in low-resource areas. The marriage of smartphones and microfluidic devices offers a powerful on-chip operating platform to enable various bio-chemical tests, remote sensing, data analysis and management in a mobile fashion. The implications of such integration are beyond telecommunication and microfluidic-related research and technology development. In this review, we will first provide the general background of microfluidic-based sensing, smartphone-based sensing, and their integration. Then, we will focus on several key application areas of MS(2) by systematically reviewing the important literature in each area. We will conclude by discussing our perspectives on the opportunities, issues and future directions of this emerging novel field.

  19. Integrating Touch-Enabled and Mobile Devices into Contemporary Mathematics Education

    Science.gov (United States)

    Meletiou-Mavrotheris, Maria, Ed.; Mavrou, Katerina, Ed.; Paparistodemou, Efi, Ed.

    2015-01-01

    Despite increased interest in mobile devices as learning tools, the amount of available primary research studies on their integration into mathematics teaching and learning is still relatively small due to the novelty of these technologies. "Integrating Touch-Enabled and Mobile Devices into Contemporary Mathematics Education" presents…

  20. System and method for interfacing large-area electronics with integrated circuit devices

    Science.gov (United States)

    Verma, Naveen; Glisic, Branko; Sturm, James; Wagner, Sigurd

    2016-07-12

    A system and method for interfacing large-area electronics with integrated circuit devices is provided. The system may be implemented in an electronic device including a large area electronic (LAE) device disposed on a substrate. An integrated circuit IC is disposed on the substrate. A non-contact interface is disposed on the substrate and coupled between the LAE device and the IC. The non-contact interface is configured to provide at least one of a data acquisition path or control path between the LAE device and the IC.

  1. Integration and Evaluation of Nanophotonic Devices Using Optical Near Field

    Science.gov (United States)

    Yatsui, Takashi; Nomura, Wataru; Yi, Gyu-Chul; Ohtsu, Motoichi

    In this chapter, we review the optical near-field phenomena and their applications to realize the nanophotonic device. To realize the nanometer-scale controllability in size and position, we demonstrate the feasibility of nanometer-scale chemical vapor deposition using optical near-field techniques (see Sect. 15.2). In which, the probe-less fabrication method for mass production is also demonstrated. To confirm the promising optical properties of individual ZnO for realizing nanophotonic devices, we performed the near-field evaluation of the ZnO quantum structure (see Sect. 15.3). To drive the nanophotonic device with external conventional diffraction-limited photonic device, the far-/near-field conversion device is required. Section 15.4 reviews nanometer-scale waveguide to be used as such a conversion device of the nanophotonic ICs.

  2. Enabling Medical Device Interoperability for the Integrated Clinical Environment

    Science.gov (United States)

    2016-02-01

    Real-Time Blue Button for Patients and Families ,” that streams physiological data (including waveforms) from medical devices connected at our lab in...Interoperability Showcase at HIMSS14, we demonstrated a new ICE app, “Real-Time Blue Button for Patients and Families ,” that streams physiological data (including...waveforms) from medical devices connected at our lab in Cambridge, MA, as well as data from medical devices connected locally. At the SmartAmerica

  3. Energy Systems Integration: Demonstrating the Grid Benefits of Connected Devices

    Energy Technology Data Exchange (ETDEWEB)

    2017-01-01

    Overview fact sheet about the Electric Power Research Institute (EPRI) and the University of Delaware Integrated Network Testbed for Energy Grid Research and Technology Experimentation (INTEGRATE) project at the Energy Systems Integration Facility. INTEGRATE is part of the U.S. Department of Energy's Grid Modernization Initiative.

  4. Design and dynamic analysis of single-axis integrated inertia measurement device

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The structure and measurement theory of a single-axis integrated inertia measurement device are discussed in this paper.The acceleration and angle velocity can be detected by the proposed sensor at the same time.The kinetic model of the device is also established.In addition,the signal generation of the single-axis integrated inertiameasurement device is analyzed and simulated.The results of the model are consistent with simulation result.

  5. SPICE Level 3 and BSIM3v3.1 characterization of monolithic integrated CMOS-MEMS devices

    Science.gov (United States)

    Staple, Bevan D.; Watts, Herman A.; Dyck, Christopher W.; Griego, A. P.; Hewlett, F. W.; Smith, James H.

    1998-09-01

    Thy monolithic integration of MicroElectroMechanical Systems (MEMS) with the driving, controlling, and signal processing electronics promises to improve the performance of micromechanical devices as well as lower their manufacturing, packaging, and instrumentation costs. Key to this integration is the proper interleaving, combining, and customizing of the manufacturing processes to produce functional integrated micromechanical devices with electronics. We have developed a MEMS-first monolithic integrated process that first seals the micromechanical devices in a planarized trench and then builds the electronics in a conventional CMOS process. To date, most of the research published on this technology has focused on the performance characteristics of the mechanical portion of the devices, with little information on the attributes of the accompanying electronics. This work attempts to reduce this information void by presenting the results of SPICE Level 3 and BSIM3v3.1 model parameters extracted for the CMOS portion of the MEMS-first process. Transistor-level simulations of MOSFET current, capacitance, output resistance, and transconductance versus voltage using the extracted model parameters closely match the measured data. Moreover, in model validation efforts, circuit-level simulation values for the average gate propagation delay in a 101-stage ring oscillator are within 13 - 18% of the measured data. These results establish the following: (1) the MEMS-first approach produces functional CMOS devices integrated on a single chip with MEMS devices and (2) the devices manufactured in the approach have excellent transistor characteristics. Thus, the MEMS-first approach renders a solid technology foundation for customers designing in the technology.

  6. Exploiting droplet formation in microfluidic devices to create functional particles

    Science.gov (United States)

    Nowak, Emilia; Simmons, Mark

    2014-11-01

    Microfluidic devices offer excellent capabilities for the formation of microstructured particles which have functional attributes e.g. in controlled delivery of pharmaceuticals, enhanced nutrition and flavours in food. In this work, a microfluidic device is employed to form microstructured particles in two steps: (i) by formation of single/double emulsions and (ii) solidification of the droplet by either gelation or solvent evaporation. Both may impart non-Newtonian properties to the component phases. The influence of phase flow rates (capillary number), surfactant type/concentration and the rheology of the component phases upon the particle formation and hydrodynamic behaviour are described. EPSRC Programme Grant, MEMPHIS, EP/K0039761/1.

  7. Miniaturized devices towards an integrated lab-on-a-chip platform for DNA diagnostics

    Science.gov (United States)

    Kaprou, G.; Papadakis, G.; Kokkoris, G.; Papadopoulos, V.; Kefala, I.; Papageorgiou, D.; Gizeli, E.; Tserepi, A.

    2015-06-01

    Microfluidics is an emerging technology enabling the development of Lab-on-a-chip (LOC) systems for clinical diagnostics, drug discovery and screening, food safety and environmental analysis. LOC systems integrate and scale down one or several laboratory functions on a single chip of a few mm2 to cm2 in size, and account for many advantages on biochemical analyses, such as low sample and reagent consumption, low cost, reduced analysis time, portability and point-of-need compatibility. Currently, available nucleic acid diagnostic tests take advantage of Polymerase Chain Reaction (PCR) that allows exponential amplification of portions of nucleic acid sequences that can be used as indicators for the identification of various diseases. Here, we present a comparison between static chamber and continuous flow miniaturized PCR devices, in terms of energy consumption for devices fabricated on the same material stack, with identical sample volume and channel dimensions. The comparison is implemented by a computational study coupling heat transfer in both solid and fluid, mass conservation of species, and joule heating. Based on the conclusions of this study, we develop low-cost and fast DNA amplification devices for both PCR and isothermal amplification, and we implement them in the detection of mutations related to breast cancer. The devices are fabricated by mass production amenable technologies on printed circuit board (PCB) substrates, where copper facilitates the incorporation of on-chip microheaters, defining the thermal zones necessary for PCR or isothermal amplification methods.

  8. Integration Over Connections in the Discretized Gravitational Functional Integrals

    Science.gov (United States)

    Khatsymovsky, V. M.

    The result of performing integrations over connection type variables in the path integral for the discrete field theory may be poorly defined in the case of non-compact gauge group with the Haar measure exponentially growing in some directions. This point is studied in the case of the discrete form of the first-order formulation of the Einstein gravity theory. Here the result of interest can be defined as generalized function (of the rest of variables of the type of tetrad or elementary areas), i.e. a functional on a set of probe functions. To define this functional, we calculate its values on the products of components of the area tensors, the so-called moments. The resulting distribution (in fact, probability distribution) has singular (δ-function-like) part with support in the nonphysical region of the complex plane of area tensors and regular part (usual function) which decays exponentially at large areas. As we discuss, this also provides suppression of large edge lengths which is important for internal consistency, if one asks whether gravity on short distances can be discrete. Some other features of the obtained probability distribution including occurrence of the local maxima at a number of the approximately equidistant values of area are also considered.

  9. Energy harvesting: an integrated view of materials, devices and applications.

    Science.gov (United States)

    Radousky, H B; Liang, H

    2012-12-21

    Energy harvesting refers to the set of processes by which useful energy is captured from waste, environmental, or mechanical sources and is converted into a usable form. The discipline of energy harvesting is a broad topic that includes established methods and materials such as photovoltaics and thermoelectrics, as well as more recent technologies that convert mechanical energy, magnetic energy and waste heat to electricity. This article will review various state-of-the-art materials and devices for direct energy conversion and in particular will include multistep energy conversion approaches. The article will highlight the nano-materials science underlying energy harvesting principles and devices, but also include more traditional bulk processes and devices as appropriate and synergistic. Emphasis is placed on device-design innovations that lead to higher efficiency energy harvesting or conversion technologies ranging from the cm/mm-scale down to MEMS/NEMS (micro- and nano-electromechanical systems) devices. Theoretical studies are reviewed, which address transport properties, crystal chemistry, thermodynamic analysis, energy transfer, system efficiency and device operation. New developments in experimental methods; device design and fabrication; nanostructured materials fabrication; materials properties; and device performance measurement techniques are discussed.

  10. Bioluminescent bioreporter integrated circuit devices and methods for detecting estrogen

    Energy Technology Data Exchange (ETDEWEB)

    Simpson, Michael L.; Paulus, Michael J.; Sayler, Gary S.; Applegate, Bruce M.; Ripp, Steven A.

    2006-08-15

    Bioelectronic devices for the detection of estrogen include a collection of eukaryotic cells which harbor a recombinant lux gene from a high temperature microorganism wherein the gene is operably linked with a heterologous promoter gene. A detectable light-emitting lux gene product is expressed in the presence of the estrogen and detected by the device.

  11. Demonstration of an integrated electroactive polymer actuator on a microfluidic electrophoresis device.

    Science.gov (United States)

    Price, Alexander K; Anderson, Kristen M; Culbertson, Christopher T

    2009-07-21

    The construction of microfluidic devices from siloxane-based polymers is widely reported in the current literature. While the use of these materials is primarily due to their rapid and facile fabrication, low cost and robustness, they also have the ability to function as smart materials. This feature, however, has not been commonly exploited in conjunction with their fluid-handling capabilities. Siloxanes are considered smart materials because their shapes can be modified in the presence of an electric field. The energy in the electric field can be transduced into mechanical energy and directly coupled with a microfabricated channel network in order to affect or initiate the movement of fluids. Here, we present a novel microfluidic device into which an electroactive polymer (EAP) actuation unit is integrated. The EAP actuation unit features a microfluidic channel placed above a patterned electrode. The patterned electrode is insulated from the channel by an EAP layer that is composed of PDMS. When a potential is applied across the EAP layer, it changes shape, which also changes the volume of the microfluidic channel above it. With this proof-of-concept device we demonstrated the ability to inject plugs of sample on a standard electrophoresis cross chip solely by changing the magnitude of the electric field between the channel and the electrode. Using an EAP actuation unit, the size of the injection plugs can be varied as a function of the electric field, the active area of the EAP actuation unit and the softness of the EAP.

  12. A Feynman integral via higher normal functions

    CERN Document Server

    Bloch, Spencer; Vanhove, Pierre

    2014-01-01

    We study the Feynman integral for the three-banana graph defined as the scalar two-point self-energy at three-loop order. The Feynman integral is evaluated for all identical internal masses in two space-time dimensions. Two calculations are given for the Feynman integral; one based on an interpretation of the integral as an inhomogeneous solution of a classical Picard-Fuchs differential equation, and the other using arithmetic algebraic geometry, motivic cohomology, and Eisenstein series. Both methods use the rather special fact that the Feynman integral is a family of regulator periods associated to a family of K3 surfaces. We show that the integral is given by a sum of elliptic trilogarithms evaluated at sixth roots of unity. This elliptic trilogarithm value is related to the regulator of a class in the motivic cohomology of the K3 family. We prove a conjecture by David Broadhurst that at a special kinematical point the Feynman integral is given by a critical value of the Hasse-Weil L-function of the K3 sur...

  13. Multiple functional UV devices based on III-Nitride quantum wells for biological warfare agent detection

    Science.gov (United States)

    Wang, Qin; Savage, Susan; Persson, Sirpa; Noharet, Bertrand; Junique, Stéphane; Andersson, Jan Y.; Liuolia, Vytautas; Marcinkevicius, Saulius

    2009-02-01

    We have demonstrated surface normal detecting/filtering/emitting multiple functional ultraviolet (UV) optoelectronic devices based on InGaN/GaN, InGaN/AlGaN and AlxGa1-xN/AlyGa1-yN multiple quantum well (MQW) structures with operation wavelengths ranging from 270 nm to 450 nm. Utilizing MQW structure as device active layer offers a flexibility to tune its long cut-off wavelength in a wide UV range from solar-blind to visible by adjusting the well width, well composition and barrier height. Similarly, its short cut-off wavelength can be adjusted by using a GaN or AlGaN block layer on a sapphire substrate when the device is illuminated from its backside, which further provides an optical filtering effect. When a current injects into the device under forward bias the device acts as an UV light emitter, whereas the device performs as a typical photodetector under reverse biases. With applying an alternating external bias the device might be used as electroabsorption modulator due to quantum confined Stark effect. In present work fabricated devices have been characterized by transmission/absorption spectra, photoresponsivity, electroluminescence, and photoluminescence measurements under various forward and reverse biases. The piezoelectric effect, alloy broadening and Stokes shift between the emission and absorption spectra in different InGaN- and AlGaN-based QW structures have been investigated and compared. Possibilities of monolithic or hybrid integration using such multiple functional devices for biological warfare agents sensing application have also be discussed.

  14. Integrating Retinoic Acid Signaling with Brain Function

    Science.gov (United States)

    Luo, Tuanlian; Wagner, Elisabeth; Drager, Ursula C.

    2009-01-01

    The vitamin A derivative retinoic acid (RA) regulates the transcription of about a 6th of the human genome. Compelling evidence indicates a role of RA in cognitive activities, but its integration with the molecular mechanisms of higher brain functions is not known. Here we describe the properties of RA signaling in the mouse, which point to…

  15. Frameworks for programming biological function through RNA parts and devices.

    Science.gov (United States)

    Win, Maung Nyan; Liang, Joe C; Smolke, Christina D

    2009-03-27

    One of the long-term goals of synthetic biology is to reliably engineer biological systems that perform human-defined functions. Currently, researchers face several scientific and technical challenges in designing and building biological systems, one of which is associated with our limited ability to access, transmit, and control molecular information through the design of functional biomolecules exhibiting novel properties. The fields of RNA biology and nucleic acid engineering, along with the tremendous interdisciplinary growth of synthetic biology, are fueling advances in the emerging field of RNA programming in living systems. Researchers are designing functional RNA molecules that exhibit increasingly complex functions and integrating these molecules into cellular circuits to program higher-level biological functions. The continued integration and growth of RNA design and synthetic biology presents exciting potential to transform how we interact with and program biology.

  16. THEORETICAL ASPECTS AND METHODS OF PARAMETERS IDENTIFICATION OF ELECTRIC TRACTION SYSTEM DEVICES. METHOD OF WEIGHT FUNCTION

    Directory of Open Access Journals (Sweden)

    T. N. Mishchenko

    2014-10-01

    Full Text Available Purpose. Development and substantiation of a new method of structural identification of electrical devices of electric traction systems for both DC and AC current. Methodology. To solve this problem the following methods are used: the methods and techniques of the linear electrical engineering, in particular, the Laplace operator method; the numerical method for solving the integral equation, which is based on the representation of the Wiener-Hopf linear equations system (this allows forming the solutions of the problem in a mathematical form of the correlation and weight functions; the factorization method, which provides certain partition of the correlation functions of the stochastic processes. Findings. It was developed the method of weight function of the electrical devices identification, which can be fully used in the systems of electric traction. As the use example of the developed method it was considered a feeder section of DC electric traction with the single power supply. On this section move two electric locomotives of the type DE 1, they have been identified by the weighting functions. The required currents and voltages of electric locomotives are also formulated in the electric traction network in probabilistic and statistical form, that is, the functions of mathematical expectation and the correlation functions are determined. At this, it is taken into account that the correlation function of the sum of random functions is equal to the sum of the correlation functions of additives, and the correlation function of the integral of a random function is defined as the double integral of the correlation function of the output of a random function. Originality. Firstly, originality consists of the adaption of the developed method of structural identification for the devices of electric traction system. Secondly, it lies in the proper development of the new method of weight function. And finally, it lies in the solution of the Wiener

  17. Optoelectronic Device Integration in Silicon (OpSIS)

    Science.gov (United States)

    2015-10-26

    Delaware in the development of fundamental design tools and methodologies for optoelectronic devices in silicon photonics. We proposed to develop...THIS PAGE U 19b. TELEPHONE NUMBER (Include area code) 302-831-4241 Standard Form 298 (Rev. 8/98) Prescribed by ANSI Std . Z39.18 Adobe...10-1-0439 Prime Award Institution: University of Washington Subaward Institution: University of Delaware Title: Optoelectronic Device

  18. Functional stimuli responsive hydrogel devices by self-folding

    Science.gov (United States)

    Yoon, ChangKyu; Xiao, Rui; Park, JaeHyun; Cha, Jaepyeong; Nguyen, Thao D.; Gracias, David H.

    2014-09-01

    We describe a photolithographic approach to create functional stimuli responsive, self-folding, microscale hydrogel devices using thin, gradient cross-linked hinges and thick, fully cross-linked panels. The hydrogels are composed of poly (N-isopropylacrylamide-co-acrylic acid) (pNIPAM-AAc) with reversible stimuli responsive properties just below physiological temperatures. We show that a variety of three-dimensional structures can be formed and reversibly actuated by temperature or pH. We experimentally characterized the swelling and mechanical properties of pNIPAM-AAc and developed a finite element model to rationalize self-folding and its variation with hinge thickness and swelling ratio. Finally, we highlight applications of this approach in the creation of functional devices such as self-folding polymeric micro-capsules, untethered micro-grippers and thermally steered micro-mirror systems.

  19. Development and Testing of an Integrated Sandia Cooler Thermoelectric Device (SCTD).

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Terry A.; Staats, Wayne Lawrence,; Leick, Michael Thomas; Zimmerman, Mark D.; Radermacher, Reinhard; Martin, Cara; Nasuta, Dennis; Kalinowski, Paul; Hoffman, William

    2014-12-01

    This report describes a FY14 effort to develop an integrated Sandia Cooler T hermoelectric D evice (SCTD) . The project included a review of feasible thermoelectric (TE) cooling applications, baseline performance testing of an existing TE device, analysis and design development of an integrated SCTD assembly, and performance measurement and validation of the integrated SCTD prototype.

  20. Adult neurogenesis: integrating theories and separating functions.

    Science.gov (United States)

    Aimone, James B; Deng, Wei; Gage, Fred H

    2010-07-01

    The continuous incorporation of new neurons in the dentate gyrus of the adult hippocampus raises exciting questions about memory and learning, and has inspired new computational models to understand the function of adult neurogenesis. These theoretical approaches suggest distinct roles for new neurons as they slowly integrate into the existing dentate gyrus network: immature adult-born neurons seem to function as pattern integrators of temporally adjacent events, thereby enhancing pattern separation for events separated in time; whereas maturing adult-born neurons possibly contribute to pattern separation by being more amenable to learning new information, leading to dedicated groups of granule cells that respond to experienced environments. We review these hypothesized functions and supporting empirical research and point to new directions for future theoretical efforts.

  1. Functionalization and microfluidic integration of silicon nanowire biologically gated field effect transistors

    DEFF Research Database (Denmark)

    Pfreundt, Andrea

    with nanowire sensors functionalized using different modification schemes. To facilitate functionalization and measurement and as a first step towards integration into a point-of-care device, several microfluidic tools were developed for sample delivery to the sensor surface and as a modular platform......This thesis deals with the development of a novel biosensor for the detection of biomolecules based on a silicon nanowire biologically gated field-effect transistor and its integration into a point-of-care device. The sensor and electrical on-chip integration was developed in a different project...

  2. Functionalization of Gold-plasmonic Devices for Protein Capture

    KAUST Repository

    Battista, E.

    2017-07-13

    Here we propose a straightforward method to functionalize gold nanostructures by using an appropriate peptide sequence already selected toward gold surfaces and derivatized with another sequence for the capture of a molecular target. Large scale 3D-plasmonic devices with different nanostructures were fabricated by means of direct nanoimprint technique. The present work is aimed to address different innovative aspects related to the fabrication of large-area 3D plasmonic arrays, their direct and easy functionalization with capture elements, and their spectroscopic verifications through enhanced Raman and enhanced fluorescence techniques.

  3. A device for the functional improvement of lagophthalmos.

    Science.gov (United States)

    Aşik, Mehmet Doğan; Yaprak, Bülent; Güven, Erdem; Karabulut, Aylin Bilgin; Güçlü, Burak

    2013-07-01

    A new device was tested on rabbits for the improvement of lagophthalmos, which causes dryness and irritation of the eye and may cause blindness if untreated. In the presented study, 14 rabbits were injected with local anesthetic to induce temporary facial palsy leading to lagophthalmos on one side. To provide functionality to the upper eyelids, ferromagnetic steel plates were either implanted within the eyelid or taped on the eyelid surface. The device detected blinking in the nonparalytic side and moved the anesthetized paralytic eyelid by pulling the steel plate electromagnetically. The control group (n = 5) did not wear the device, and they could not shut their paralytic eyelids. The treatment group with the external placement of the metal plate (n = 4) and the treatment group with the implant (n = 5) wore the device for artificial blinking. All animals were observed during the experiments, and blinking was recorded on digital video. The data collected from video records were analyzed to test the statistical difference of blinking between control and the treated groups. The results showed that the treatment groups could artificially move their paralytic eyelids. Furthermore, the treatment group with the implant showed a noticeable similarity in eyelid position compared with healthy (nonparalytic) eyes.

  4. Fabrication and characterization of an integrated ionic device from suspended polypyrrole and alamethicin-reconstituted lipid bilayer membranes

    Science.gov (United States)

    Northcutt, Robert; Sundaresan, Vishnu-Baba

    2012-09-01

    Conducting polymers are electroactive materials that undergo conformal relaxation of the polymer backbone in the presence of an electrical field through ion exchange with solid or aqueous electrolytes. This conformal relaxation and the associated morphological changes make conducting polymers highly suitable for actuation and sensing applications. Among smart materials, bioderived active materials also use ion transport for sensing and actuation functions via selective ion transport. The transporter proteins extracted from biological cell membranes and reconstituted into a bilayer lipid membrane in bioderived active materials regulate ion transport for engineering functions. The protein transporter reconstituted in the bilayer lipid membrane is referred to as the bioderived membrane and serves as the active component in bioderived active materials. Inspired by the similarities in the physics of transduction in conducting polymers and bioderived active materials, an integrated ionic device is formed from the bioderived membrane and the conducting polymer membrane. This ionic device is fabricated into a laminated thin-film membrane and a common ion that can be processed by the bioderived and the conducting polymer membranes couple the ionic function of these two membranes. An integrated ionic device, fabricated from polypyrrole (PPy) doped with sodium dodecylbenzenesulfonate (NaDBS) and an alamethicin-reconstituted DPhPC bilayer lipid membrane, is presented in this paper. A voltage-gated sodium current regulates the electrochemical response in the PPy(DBS) layer. The integrated device is fabricated on silicon-based substrates through microfabrication, electropolymerization, and vesicle fusion, and ionic activity is characterized through electrochemical measurements.

  5. Novel Hydrogen Purification Device Integrated with PEM Fuel Cells

    Energy Technology Data Exchange (ETDEWEB)

    Joseph Schwartz; Hankwon Lim; Raymond Drnevich

    2010-12-31

    A prototype device containing twelve membrane tubes was designed, built, and demonstrated. The device produced almost 300 scfh of purified hydrogen at 200 psig feed pressure. The extent of purification met the program target of selectively removing enough impurities to enable industrial-grade hydrogen to meet purity specifications for PEM fuel cells. An extrusion process was developed to produce substrate tubes. Membranes met several test objectives, including completing 20 thermal cycles, exceeding 250 hours of operating life, and demonstrating a flux of 965 scfh/ft2 at 200 psid and 400 C.

  6. User centered integration of Internet of Things devices

    Science.gov (United States)

    Manione, Roberto

    2017-06-01

    This paper discusses an IoT framework which allows rapid and easy setup and customization of end-to-end solutions for field data collection and presentation; it is effective in the development of both informative and transactional applications for a wide range of application fields, such as home, industry and environment. On the "far-end" of the chain are the IoT devices gathering the signals; they are developed used a full Model Based approach, where programming is not required: the TaskScript technology is used to this purpose, which supports a choice of physical boards and boxes equipped with a range of Input and Output interfaces, and with a Tcp/Ip interface. The development of the needed specific IoT devices takes advantage of the available "standard" hardware; the software development of the algorithms for sampling, conditioning and uploading signals to the Cloud is supported by a graphical-only IDE. On the "near-end" of the chain is the presentation Interface, through which users can browse through the information provided by their IoT devices; it is implemented in a Conversational way, using the Bot paradigm: Bots are conversational automatons, to whom users can "chat". They are accessed via mainstream Messenger programs, such as Telegram(C), Skype(C) or others, available on smartphones, tablets or desktops; unlike apps, bots do not need installation on the user device. A message Broker has been implemented, to mediate among the far-end and the near-end of the chain, providing the needed services; its behavior is driven by a set of rules provided on a per-device basis, at configuration level; the Broker is able to store messages received from the devices, process and forward them to the specified recipient(s) according to the provided rules; finally, finally is it is able to send transactional commands, from users back to the requested device, to implement not only field observation but also field control. IoT solutions implemented with the proposed

  7. Silicon analog components device design, process integration, characterization, and reliability

    CERN Document Server

    El-Kareh, Badih

    2015-01-01

    This book covers modern analog components, their characteristics, and interactions with process parameters. It serves as a comprehensive guide, addressing both the theoretical and practical aspects of modern silicon devices and the relationship between their electrical properties and processing conditions. Based on the authors’ extensive experience in the development of analog devices, this book is intended for engineers and scientists in semiconductor research, development and manufacturing. The problems at the end of each chapter and the numerous charts, figures and tables also make it appropriate for use as a text in graduate and advanced undergraduate courses in electrical engineering and materials science.

  8. Fabric-based integrated energy devices for wearable activity monitors.

    Science.gov (United States)

    Jung, Sungmook; Lee, Jongsu; Hyeon, Taeghwan; Lee, Minbaek; Kim, Dae-Hyeong

    2014-09-01

    A wearable fabric-based integrated power-supply system that generates energy triboelectrically using human activity and stores the generated energy in an integrated supercapacitor is developed. This system can be utilized as either a self-powered activity monitor or as a power supply for external wearable sensors. These demonstrations give new insights for the research of wearable electronics.

  9. Integrated plant information technology design support functionality

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yeon Seung; Kim, Dae Jin [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of); Barber, P. W.; Goland, D. [Atomic Energy Canada Ltd., (Canada)

    1996-06-01

    This technical report was written as a result of Integrated Plant Information System (IPIS) feasibility study on CANDU 9 project which had been carried out from January, 1994 to March, 1994 at AECL (Atomic Energy Canada Limited) in Canada. From 1987, AECL had done endeavour to change engineering work process from paper based work process to computer based work process through CANDU 3 project. Even though AECL had a lot of good results form computerizing the Process Engineering, Instrumentation Control and Electrical Engineering, Mechanical Engineering, Computer Aided Design and Drafting, and Document Management System, but there remains the problem of information isolation and integration. On this feasibility study, IPIS design support functionality guideline was suggested by evaluating current AECL CAE tools, analyzing computer aided engineering task and work flow, investigating request for implementing integrated computer aided engineering and describing Korean request for future CANDU design including CANDU 9. 6 figs. (Author).

  10. Electrical Impedance Spectroscopy for Detection of Cells in Suspensions Using Microfluidic Device with Integrated Microneedles

    Directory of Open Access Journals (Sweden)

    Muhammad Asraf Mansor

    2017-02-01

    Full Text Available In this study, we introduce novel method of flow cytometry for cell detection based on impedance measurements. The state of the art method for impedance flow cytometry detection utilizes an embedded electrode in the microfluidic to perform measurement of electrical impedance of the presence of cells at the sensing area. Nonetheless, this method requires an expensive and complicated electrode fabrication process. Furthermore, reuse of the fabricated electrode also requires an intensive and tedious cleaning process. Due to that, we present a microfluidic device with integrated microneedles. The two microneedles are placed at the half height of the microchannel for cell detection and electrical measurement. A commercially-available Tungsten needle was utilized for the microneedles. The microneedles are easily removed from the disposable PDMS (Polydimethylsiloxane microchannel and can be reused with a simple cleaning process, such as washing by ultrasonic cleaning. Although this device was low cost, it preserves the core functionality of the sensor, which is capable of detecting passing cells at the sensing area. Therefore, this device is suitable for low-cost medical and food safety screening and testing process in developing countries.

  11. Integration Evaluation of the Advanced Mission Extender Device Max

    Science.gov (United States)

    2014-04-04

    hydrated before starting any of the test phases. The urine bags were drained into toilets and the bags were placed in clinical waste containers at the...being completely dry” after use of the device in the aircraft. One of the female units malfunctioned and failed to inflate or provide suction , due to

  12. Integrals of products of Hurwitz zeta functions

    CERN Document Server

    Shpot, M A; Paris, R B

    2016-01-01

    We evaluate two integrals over $x\\in [0,1]$ involving products of the function $\\zeta_1(a,x)\\equiv \\zeta(a,x)-x^{-a}$ for $\\Re (a)>1$, where $\\zeta(a,x)$ is the Hurwitz zeta function. The evaluation of these integrals for the particular case of integer $a\\geq 2$ is also presented. As an application we calculate the $O(g)$ weak-coupling expansion coefficient $c_{1}(\\varepsilon)$ of the Casimir energy for a film with Dirichlet-Dirichlet boundary conditions, first stated by Symanzik [Schr\\"odinger representation and Casimir effect in renormalizable quantum field theory, Nucl. Phys. B 190 (1981) 1-44] in the framework of $g\\phi^4_{4-\\varepsilon}$ theory.

  13. 77 FR 60721 - Certain Semiconductor Integrated Circuit Devices and Products Containing Same; Notice of...

    Science.gov (United States)

    2012-10-04

    ... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Certain Semiconductor Integrated Circuit Devices and Products Containing Same; Notice of... importation, and the sale within the United States after importation of certain semiconductor...

  14. Integration of microcantilevers with photonic structures for mechano-optical wavelength selective devices

    NARCIS (Netherlands)

    Chakkalakkal Abdulla, Shahina Mumthaz

    2011-01-01

    This thesis deals with the fabrication technology and mechano-optical characterisation of compact integrated wavelength selective optical devices for use in telecommunication applications. Upon electrostatic actuation, a mechanical element perturbs the optical evanescent field of a guided wave provi

  15. Final technical report for DOE Computational Nanoscience Project: Integrated Multiscale Modeling of Molecular Computing Devices

    Energy Technology Data Exchange (ETDEWEB)

    Cummings, P. T.

    2010-02-08

    This document reports the outcomes of the Computational Nanoscience Project, "Integrated Multiscale Modeling of Molecular Computing Devices". It includes a list of participants and publications arising from the research supported.

  16. Large microwave phase shift and small distortion in an integrated waveguide device

    DEFF Research Database (Denmark)

    Öhman, Filip; Sales, Salvador; Chen, Yaohui;

    2007-01-01

    We have obtained a tunable phase shift of 150 degrees in an integrated semiconductor waveguide by optimizing the interplay of fast and slow light effects. Furthermore, the distortions imposed by device nonlinearities have been quantified....

  17. 77 FR 40381 - Certain Digital Televisions Containing Integrated Circuit Devices and Components Thereof, Notice...

    Science.gov (United States)

    2012-07-09

    ... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Certain Digital Televisions Containing Integrated Circuit Devices and Components Thereof, Notice of Commission Determination Not To Review an Initial Determination Terminating the Investigation as...

  18. Integral transform techniques for Green's function

    CERN Document Server

    Watanabe, Kazumi

    2014-01-01

    In this book mathematical techniques for integral transforms are described in detail but concisely. The techniques are applied to the standard partial differential equations, such as the Laplace equation, the wave equation and elasticity equations. The Green's functions for beams, plates and acoustic media are also shown along with their mathematical derivations. Lists of Green's functions are presented for the future use. The Cagniard's-de Hoop method for the double inversion is described in detail, and 2D and 3D elasto-dynamics problems are fully treated.

  19. An integral involving the generalized zeta function

    Directory of Open Access Journals (Sweden)

    E. Elizalde

    1990-01-01

    Full Text Available A general value for ∫abdtlogΓ(t, for a, b positive reals, is derived in terms of the Hurwitz ζ function. That expression is checked for a previously known special integral, and the case where a is a positive integer and b is half an odd integer is considered. The result finds application in calculating the numerical value of the derivative of the Riemann zeta function at the point −1, a quantity that arises in the evaluation of determinants of Laplacians on compact Riemann surfaces.

  20. Integrated Graphene-Based Optoelectronic Devices Used for Ultrafast Optical-THz Photodetectors, Modulators and Emitters

    Science.gov (United States)

    2015-04-03

    AFRL-RV-PS- AFRL-RV-PS- TR-2015-0083 TR-2015-0083 INTEGRATED GRAPHENE -BASED OPTOELECTRONIC DEVICES USED FOR ULTRAFAST OPTICAL-THZ PHOTODETECTORS...From - To) 7 Nov 2011 – 12 Feb 2012 4. TITLE AND SUBTITLE Integrated Graphene -Based Optoelectronic Devices Used for Ultrafast Optical-THz...quasiparticles in graphene electrons, phlasmons and electron-hole pairs with the ultimate goal to convert them into or be extracted from terahertz

  1. Integration of a Novel Microfluidic Device with Silicon Light Emitting Diode-Antifuse and Photodetector

    NARCIS (Netherlands)

    LeMinh, P.; Holleman, J.; Berenschot, J.W.; Tas, N.R.; Berg, van den A.

    2002-01-01

    Light emitting diode antifuse has been integrated into a microfluidic device that is realized with extended standard CMOS technological steps. The device comprises of a microchannel sandwiched between a photodiode detector and a nanometer-scale diode antifuse light emitter. In this chapter, the devi

  2. Monolithic Integration of a Novel Microfluidic Device with Silicon Light Emitting Diode-Antifuse and Photodetector

    NARCIS (Netherlands)

    LeMinh, P.; Holleman, J.; Berenschot, J.W.; Tas, N.R.; Berg, van den A.

    2002-01-01

    Light emitting diode antifuse has been integrated into a microfluidic device that is realized with extended standard CMOS technological steps. The device comprises of a microchannel sandwiched between a photodiode detector and a nanometer-scale diode antifuse light emitter. Within this contribution,

  3. Chemical and physical processes for integrated temperature control in microfluidic devices

    NARCIS (Netherlands)

    Guijt, Rosanne M.; Dodge, Arash; Van Dedem, Gijs W. K.; De Rooij, Nico F.; Verpoorte, Elisabeth

    2003-01-01

    Microfluidic devices are a promising new tool for studying and optimizing (bio)chemical reactions and analyses. Many (bio)chemical reactions require accurate temperature control, such as for example thermocycling for PCR. Here, a new integrated temperature control system for microfluidic devices is

  4. Chemical and physical processes for integrated temperature control in microfluidic devices

    NARCIS (Netherlands)

    Guijt, Rosanne M.; Dodge, Arash; Van Dedem, Gijs W. K.; De Rooij, Nico F.; Verpoorte, Elisabeth

    2003-01-01

    Microfluidic devices are a promising new tool for studying and optimizing (bio)chemical reactions and analyses. Many (bio)chemical reactions require accurate temperature control, such as for example thermocycling for PCR. Here, a new integrated temperature control system for microfluidic devices is

  5. An automatic synthesis method of compact models of integrated circuit devices based on equivalent circuits

    Science.gov (United States)

    Abramov, I. I.

    2006-05-01

    An automatic synthesis method of equivalent circuits of integrated circuit devices is described in the paper. This method is based on a physical approach to construction of finite-difference approximation to basic equations of semiconductor device physics. It allows to synthesize compact equivalent circuits of different devices automatically as alternative to, for example, sufficiently formal BSIM2 and BSIM3 models used in circuit simulation programs of SPICE type. The method is one of possible variants of general methodology for automatic synthesis of compact equivalent circuits of almost arbitrary devices and circuit-type structures of micro- and nanoelecronics [1]. The method is easily extended in the case of necessity to account thermal effects in integrated circuits. It was shown that its application would be especially perspective for analysis of integrated circuit fragments as a whole and for identification of significant collective physical effects, including parasitic effects in VLSI and ULSI. In the paper the examples illustrating possibilities of the method for automatic synthesis of compact equivalent circuits of some of semiconductor devices and integrated circuit devices are considered. Special attention is given to examples of integrated circuit devices for coarse grids of spatial discretization (less than 10 nodes).

  6. Coordinate Systems Integration for Craniofacial Database from Multimodal Devices

    Directory of Open Access Journals (Sweden)

    Deni Suwardhi

    2005-05-01

    Full Text Available This study presents a data registration method for craniofacial spatial data of different modalities. The data consists of three dimensional (3D vector and raster data models. The data is stored in object relational database. The data capture devices are Laser scanner, CT (Computed Tomography scan and CR (Close Range Photogrammetry. The objective of the registration is to transform the data from various coordinate systems into a single 3-D Cartesian coordinate system. The standard error of the registration obtained from multimodal imaging devices using 3D affine transformation is in the ranged of 1-2 mm. This study is a step forward for storing the craniofacial spatial data in one reference system in database.

  7. Integrated separation of blood plasma from whole blood for microfluidic paper-based analytical devices.

    Science.gov (United States)

    Yang, Xiaoxi; Forouzan, Omid; Brown, Theodore P; Shevkoplyas, Sergey S

    2012-01-21

    Many diagnostic tests in a conventional clinical laboratory are performed on blood plasma because changes in its composition often reflect the current status of pathological processes throughout the body. Recently, a significant research effort has been invested into the development of microfluidic paper-based analytical devices (μPADs) implementing these conventional laboratory tests for point-of-care diagnostics in resource-limited settings. This paper describes the use of red blood cell (RBC) agglutination for separating plasma from finger-prick volumes of whole blood directly in paper, and demonstrates the utility of this approach by integrating plasma separation and a colorimetric assay in a single μPAD. The μPAD was fabricated by printing its pattern onto chromatography paper with a solid ink (wax) printer and melting the ink to create hydrophobic barriers spanning through the entire thickness of the paper substrate. The μPAD was functionalized by spotting agglutinating antibodies onto the plasma separation zone in the center and the reagents of the colorimetric assay onto the test readout zones on the periphery of the device. To operate the μPAD, a drop of whole blood was placed directly onto the plasma separation zone of the device. RBCs in the whole blood sample agglutinated and remained in the central zone, while separated plasma wicked through the paper substrate into the test readout zones where analyte in plasma reacted with the reagents of the colorimetric assay to produce a visible color change. The color change was digitized with a portable scanner and converted to concentration values using a calibration curve. The purity and yield of separated plasma was sufficient for successful operation of the μPAD. This approach to plasma separation based on RBC agglutination will be particularly useful for designing fully integrated μPADs operating directly on small samples of whole blood.

  8. Final Report for Integrated Multiscale Modeling of Molecular Computing Devices

    Energy Technology Data Exchange (ETDEWEB)

    Glotzer, Sharon C.

    2013-08-28

    In collaboration with researchers at Vanderbilt University, North Carolina State University, Princeton and Oakridge National Laboratory we developed multiscale modeling and simulation methods capable of modeling the synthesis, assembly, and operation of molecular electronics devices. Our role in this project included the development of coarse-grained molecular and mesoscale models and simulation methods capable of simulating the assembly of millions of organic conducting molecules and other molecular components into nanowires, crossbars, and other organized patterns.

  9. Enabling Medical Device Interoperability for the Integrated Clinical Environment

    Science.gov (United States)

    2016-12-01

    built a Clinical Scenario Repository, defined governance , and fine-tuned it with feedback from clinicians. We created an open -source, freely available...and point-of-care access to accurate, comprehensive, contextually rich clinical data for all acuity levels of healthcare. Open platforms of plug-and...prototype Data Logger on the MD PnP open platform • Improve playback to support adverse event analysis • Continue research with Unique Device

  10. Efficient Si photovoltaic devices with integrated micro/nano holes

    Science.gov (United States)

    Cansizoglu, Hilal; Gao, Yang; Kaya, Ahmet; Ghandiparsi, Soroush; Polat, Kazim G.; Wang, Yichuan; Zhang, Runzhou; Reggad, Hind; Mayet, Ahmed; Ponizovskaya Devine, Ekaterina; Islam, M. Saif

    2016-09-01

    Efficient light harvesting in a thin layer of crystalline Si can be realized by implementing nanoscale pillars and holes to the device structure. The major drawback of the pillars and holes based photovoltaic devices is high surface to volume ratio, contributing to an increase in surface recombination rate of the photo-generated carriers. The common techniques used in pillars/holes fabrication such as dry etching make the surface even worse by bombarding it with high energy ions. Therefore, such damaged surfaces of high aspect ratio structures need to be effectively passivated. In this study, we demonstrate a hole based thin crystalline Si photovoltaic device with enhanced open circuit voltage and short circuit current after a successful surface passivation process through a wet oxidation. In addition, the effect of passivation layer fabricated by rapid thermal oxide growth on photo response is investigated. A successful fabrication of thin crystalline Si solar cells can lead to the applications of ultra-thin, highly efficient, flexible and wearable energy sources.

  11. Integration of carbon nanotubes with semiconductor technology: fabrication of hybrid devices by III–V molecular beam epitaxy

    DEFF Research Database (Denmark)

    Stobbe, Søren; Lindelof, P. E.; Nygård, J.

    2006-01-01

    on incorporation of singlewall nanotubes in III–V semiconductor heterostructures grown by molecular beam epitaxy (MBE). We demonstrate that singlewall carbon nanotubes can be overgrown using MBE; electrical contacts to the nanotubes are obtained by GaMnAs grown at 250 °C. The resulting devices can exhibit field......We review a number of essential issues regarding the integration of carbon nanotubes in semiconductor devices for electronics: material compatibility, electrical contacts, functionalities, circuit architectures and reliability. In the second part of the paper, we present our own recent results...

  12. Seismic isolation device having charging function by a transducer

    Science.gov (United States)

    Yamaguchi, Takashi; Miura, Nanako; Takahashi, Masaki

    2016-04-01

    In late years, many base isolated structures are planned as the seismic design, because they suppress vibration response significantly against large earthquake. To achieve greater safety, semi-active or active vibration control system is installed in the structures as earthquake countermeasures. Semi-active and active vibration control systems are more effective than passive vibration control system to large earthquake in terms of vibration reduction. However semi-active and active vibration control system cannot operate as required when external power supply is cut off. To solve the problem of energy consumption, we propose a self-powered active seismic isolation floor which achieve active control system using regenerated vibration energy. This device doesn't require external energy to produce control force. The purpose of this study is to propose the seismic isolation device having charging function and to optimize the control system and passive elements such as spring coefficients and damping coefficients using genetic algorithm. As a result, optimized model shows better performance in terms of vibration reduction and electric power regeneration than the previous model. At the end of this paper, the experimental specimen of the proposed isolation device is shown.

  13. The function of consciousness in multisensory integration.

    Science.gov (United States)

    Palmer, Terry D; Ramsey, Ashley K

    2012-12-01

    The function of consciousness was explored in two contexts of audio-visual speech, cross-modal visual attention guidance and McGurk cross-modal integration. Experiments 1, 2, and 3 utilized a novel cueing paradigm in which two different flash suppressed lip-streams cooccured with speech sounds matching one of these streams. A visual target was then presented at either the audio-visually congruent or incongruent location. Target recognition differed for the congruent versus incongruent trials, and the nature of this difference depended on the probabilities of a target appearing at these respective locations. Thus, even though the lip-streams were never consciously perceived, they were nevertheless meaningfully integrated with the consciously perceived sounds, and participants learned to guide their attention according to statistical regularities between targets and these unconsciously perceived cross-modal cues. In Experiment 4, McGurk stimuli were presented in which the lip-streams were either flash suppressed (4a) or unsuppressed (4b), and the McGurk effect was found to vanish under conditions of flash suppression. Overall, these results suggest a simple yet fundamental principle regarding the function of consciousness in multisensory integration - cross-modal effects can occur in the absence of consciousness, but the influencing modality must be consciously perceived for its information to cross modalities.

  14. Fabrication of Embedded Microvalve on PMMA Microfluidic Devices through Surface Functionalization

    CERN Document Server

    Toh, A G G; Ng, S H

    2008-01-01

    The integration of a PDMS membrane within orthogonally placed PMMA microfluidic channels enables the pneumatic actuation of valves within bonded PMMA-PDMS-PMMA multilayer devices. Here, surface functionalization of PMMA substrates via acid catalyzed hydrolysis and air plasma corona treatment were investigated as possible techniques to permanently bond PMMA microfluidic channels to PDMS surfaces. FTIR and water contact angle analysis of functionalized PMMA substrates showed that air plasma corona treatment was most effective in inducing PMMA hydrophilicity. Subsequent fluidic tests showed that air plasma modified and bonded PMMA multilayer devices could withstand fluid pressure at an operational flow rate of 9 mircoliters/min. The pneumatic actuation of the embedded PDMS membrane was observed through optical microscopy and an electrical resistance based technique. PDMS membrane actuation occurred at pneumatic pressures of as low as 10kPa and complete valving occurred at 14kPa for 100 micrometers x 100 micromet...

  15. Flexible fiber energy storage and integrated devices: recent progress and perspectives

    Directory of Open Access Journals (Sweden)

    Xianfu Wang

    2015-06-01

    Full Text Available Flexible fiber-shaped energy storage devices have been studied and developed intensively over the past few years to meet the demands of modern electronics in terms of flexibility, weavability and being lightweight. In this review, fiber electrodes and flexible fiber energy storage devices containing solid-state supercapacitors (SCs and lithium-ion batteries (LIBs are carefully summarized with particular emphasis on their electrode fabrication, structure design and flexibility. In addition, emerging wire-shaped integrated energy systems, combined energy storage and solar cells, as well as other electronic devices to realize self-charging and self-powered integrated systems are specifically highlighted.

  16. Silicon photonic integrated devices for datacenter optical networks

    Science.gov (United States)

    Fiorentino, Marco; Chen, Chin-Hui; Kurczveil, Géza; Liang, Di; Peng, Zhen; Beausoleil, Raymond

    2014-03-01

    The evolution of computing infrastructure and workloads has put an enormous pressure on datacenter networks. It is expected that bandwidth will scale without increases in the network power envelope and total cost of ownership. Networks based on silicon photonic devices promise to help alleviate these problems, but a viable development path for these technologies is not yet fully outlined. In this paper, we report our progress on developing components and strategies for datacenter silicon photonics networks. We will focus on recent progress on compact, low-threshold hybrid Si lasers and the CWDM transceivers based on these lasers as well as DWDM microring resonator-based transceivers.

  17. Ultrafast laser inscribed integrated photonics: material science to device development

    Directory of Open Access Journals (Sweden)

    Gross S.

    2013-11-01

    Full Text Available Detailed studies of intense light – material interactions has led to new insights into fs laser induced refractive index change in a range of glass types. This body of knowledge enables the development of advanced processing methodologies, resulting in novel planar and 3D guided wave devices. We will review the chemistry and morphology associated with fs laser induced refractive index change in multi-component glasses such as ZBLAN, phosphates and silicates, and discuss how these material changes inform our research programs developing a range of active and passive lightwave systems.

  18. Crystalline Silicon Interconnected Strips (XIS). Introduction to a New, Integrated Device and Module Concept

    Energy Technology Data Exchange (ETDEWEB)

    Van Roosmalen, J.; Bronsveld, P.; Mewe, A.; Janssen, G.; Stodolny, M.; Cobussen-Pool, E.; Bennett, I.; Weeber, A.; Geerligs, B. [ECN Solar Energy, P.O. Box 1, NL-1755 ZG, Petten (Netherlands)

    2012-06-15

    A new device concept for high efficiency, low cost, wafer based silicon solar cells is introduced. To significantly lower the costs of Si photovoltaics, high efficiencies and large reductions of metals and silicon costs are required. To enable this, the device architecture was adapted into low current devices by applying thin silicon strips, to which a special high efficiency back-contact heterojunction cell design was applied. Standard industrial production processes can be used for our fully integrated cell and module design, with a cost reduction potential below 0.5 euro/Wp. First devices have been realized demonstrating the principle of a series connected back contact hybrid silicon heterojunction module concept.

  19. Femtosecond Laser Microfabrication of an Integrated Device for Optical Release and Sensing of Bioactive Compounds

    Science.gov (United States)

    Ghezzi, Diego; Vazquez, Rebeca Martinez; Osellame, Roberto; Valtorta, Flavia; Pedrocchi, Alessandra; Valle, Giuseppe Della; Ramponi, Roberta; Ferrigno, Giancarlo; Cerullo, Giulio

    2008-01-01

    Flash photolysis of caged compounds is one of the most powerful approaches to investigate the dynamic response of living cells. Monolithically integrated devices suitable for optical uncaging are in great demand since they greatly simplify the experiments and allow their automation. Here we demonstrate the fabrication of an integrated bio-photonic device for the optical release of caged compounds. Such a device is fabricated using femtosecond laser micromachining of a glass substrate. More in detail, femtosecond lasers are used both to cut the substrate in order to create a pit for cell growth and to inscribe optical waveguides for spatially selective uncaging of the compounds present in the culture medium. The operation of this monolithic bio-photonic device is tested using both free and caged fluorescent compounds to probe its capability of multipoint release and optical sensing. Application of this device to the study of neuronal network activity can be envisaged.

  20. EDITORIAL: Design and function of molecular and bioelectronics devices

    Science.gov (United States)

    Krstic, Predrag; Forzani, Erica; Tao, Nongjian; Korkin, Anatoli

    2007-10-01

    Further rapid progress of electronics, in particular the increase of computer power and breakthroughs in sensor technology for industrial, medical diagnostics and environmental applications, strongly depends on the scaling of electronic devices, ultimately to the size of molecules. Design of controllable molecular-scale devices may resolve the problem of energy dissipation at the nanoscale and take advantage of molecular self-assembly in the so-called bottom-up approach. This special issue of Nanotechnology is devoted to a better understanding of the function and design of molecular-scale devices that are relevant to future electronics and sensor technology. Papers contained in this special issue are selected from the symposium Nano and Giga Challenges in Electronics and Photonics: From Atoms to Materials to Devices to System Architecture (12-16 March, 2007, Phoenix, Arizona, USA), as well as from original and novel scientific contributions of invited world-renown researchers. It addresses both theoretical and experimental achievements in the fields of molecular and bioelectronics, chemical and biosensors at the molecular level, including carbon nanotubes, novel nanostructures, as well as related research areas and industrial applications. The conference series Nano and Giga Challenges in Electronics and Photonics was launched as a truly interdisciplinary forum to bridge scientists and engineers to work across boundaries in the design of future information technologies, from atoms to materials to devices to system architecture. Following the first two successful meetings in Moscow, Russia (NGCM2002) and Krakow, Poland (NGCM2004), the third Nano and Giga Forum (NGC2007) was held in 2007 hosted by Arizona State University. Besides this special issue of Nanotechnology, two other collections (in the journal Solid State Electronics and the tutorial book in the series Nanostructure Science and Technology Springer) have published additional selected and invited papers

  1. Design and function of molecular and bioelectronics devices.

    Science.gov (United States)

    Krstic, Predrag; Forzani, Erica; Tao, Nongjian; Korkin, Anatoli

    2007-10-24

    Further rapid progress of electronics, in particular the increase of computer power and breakthroughs in sensor technology for industrial, medical diagnostics and environmental applications, strongly depends on the scaling of electronic devices, ultimately to the size of molecules. Design of controllable molecular-scale devices may resolve the problem of energy dissipation at the nanoscale and take advantage of molecular self-assembly in the so-called bottom-up approach. This special issue of Nanotechnology is devoted to a better understanding of the function and design of molecular-scale devices that are relevant to future electronics and sensor technology. Papers contained in this special issue are selected from the symposium Nano and Giga Challenges in Electronics and Photonics: From Atoms to Materials to Devices to System Architecture (12-16 March, 2007, Phoenix, Arizona, USA), as well as from original and novel scientific contributions of invited world-renown researchers. It addresses both theoretical and experimental achievements in the fields of molecular and bioelectronics, chemical and biosensors at the molecular level, including carbon nanotubes, novel nanostructures, as well as related research areas and industrial applications. The conference series Nano and Giga Challenges in Electronics and Photonics was launched as a truly interdisciplinary forum to bridge scientists and engineers to work across boundaries in the design of future information technologies, from atoms to materials to devices to system architecture. Following the first two successful meetings in Moscow, Russia (NGCM2002) and Krakow, Poland (NGCM2004), the third Nano and Giga Forum (NGC2007) was held in 2007 hosted by Arizona State University. Besides this special issue of Nanotechnology, two other collections (in the journal Solid State Electronics and the tutorial book in the series Nanostructure Science and Technology Springer) have published additional selected and invited papers

  2. Quantum dot lasers and integrated guided wave devices on Si

    Science.gov (United States)

    Yang, Jun; Mi, Zetian; Bhattacharya, Pallab

    2007-02-01

    We have studied the growth and characteristics of self-organized InGaAs/GaAs quantum dot lasers and their monolithic integration with waveguides and quantum well electroabsorption modulators on Si. Utilizing multiple layers of InAs quantum dots as effective dislocation filters near the GaAs-Si interface, we have demonstrated high performance quantum dot lasers grown directly on Si that exhibit, for the first time, relatively low threshold current (J th = 900 A/cm2), large characteristic temperature (T 0 = 278 K), and output slope efficiency ( >=0.3 W/A). Focused-ion-beam milling has been used to form high-quality facets for the cavity mirror and coupling groove of an integrated laser/waveguide system on Si. We have also achieved a groove-coupled laser/modulator system on Si that exhibits a coupling coefficient greater than 20% and a modulation depth of ~ 100% at 5 V reverse bias.

  3. Accelerating functional verification of an integrated circuit

    Energy Technology Data Exchange (ETDEWEB)

    Deindl, Michael; Ruedinger, Jeffrey Joseph; Zoellin, Christian G.

    2015-10-27

    Illustrative embodiments include a method, system, and computer program product for accelerating functional verification in simulation testing of an integrated circuit (IC). Using a processor and a memory, a serial operation is replaced with a direct register access operation, wherein the serial operation is configured to perform bit shifting operation using a register in a simulation of the IC. The serial operation is blocked from manipulating the register in the simulation of the IC. Using the register in the simulation of the IC, the direct register access operation is performed in place of the serial operation.

  4. Integrating Building Functions into Massive External Walls

    Directory of Open Access Journals (Sweden)

    Ahmed Hisham Hafez

    2016-05-01

    Full Text Available Well into the twentieth century, brick and stone were the materials used. Bricklaying and stonemasonry were the construction technologies employed for the exterior walls of virtually all major structures. However, with the rise in quality of life, the massive walls alone became incapable of fulfilling all the developed needs. Adjacent systems and layers had then to be attached to the massive layer. Nowadays, the external wall is usually composed of a layered construction. Each external wall function is usually represented by a separate layer or system. The massive layer of the wall is usually responsible for the load-bearing function.Traditional massive external walls vary in terms of their external appearance, their composition and attached layers. However, their design and construction process is usually a repeated process. It is a linear process where each discipline is concerned with a separate layer or system. These disciplines usually take their tasks away and bring them back to be re-integrated in a layered manner. New massive technologies with additional function have recently become available.Such technologies can provide the external wall with other functions in addition to its load-bearing function. The purpose of this research is to map the changes required to the traditional design and construction process when massive technologies with additional function are applied in external walls. Moreover, the research aims at assessing the performance of massive solutions with additional function when compared to traditional solutions in two different contexts, the Netherlands and Egypt.Through the analysis of different additional function technologies in external walls, a guidance scheme for different stakeholders is generated. It shows the expected process changes as related to the product level and customization level. Moreover, the research concludes that the performance of additional insulating technologies, and specifically Autoclaved

  5. Field-effect transistor self-electrooptic effect device integrated photodiode, quantum well modulator and transistor

    Energy Technology Data Exchange (ETDEWEB)

    Miller, D.A.B.; Feuer, M.D.; Chang, T.Y.; Shunk, S.C.; Henry, J.E.; Burrows, D.J.; Chemla, D.S.

    1989-03-01

    The authors propose and demonstrate the integration of a photodiode, a quantum-confined Stark effect quantum well optical modulator and a metal-semiconductor field-effect transistor (MESFET), to make a field-effect transistor self-electrooptic effect device. This integration allows optical inputs and outputs on the surface of a GaAs-integrated circuit chip, compatible with standard MESFET processing. As an illustration of feasibility, the authors demonstrate optical signal amplification with a single MESFET.

  6. Integrative device and process of oxidization, degassing, acidity adjustment of 1BP from APOR process

    Energy Technology Data Exchange (ETDEWEB)

    Zuo, Chen; Zheng, Weifang, E-mail: wfazh@ciae.ac.cn; Yan, Taihong; He, Hui; Li, Gaoliang; Chang, Shangwen; Li, Chuanbo; Yuan, Zhongwei

    2016-02-15

    Graphical abstract: Previous (left) and present (right) device of oxidation, degassing, acidity adjustment of 1BP. - Highlights: • We designed an integrative device and process. • The utilization efficiency of N{sub 2}O{sub 4} is increased significantly. • Our work results in considerable simplification of the device. • Process parameters are determined by experiments. - Abstract: Device and process of oxidization, degassing, acidity adjustment of 1BP (The Pu production feed from U/Pu separation section) from APOR process (Advanced Purex Process based on Organic Reductants) were improved through rational design and experiments. The device was simplified and the process parameters, such as feed position and flow ratio, were determined by experiments. Based on this new device and process, the reductants N,N-dimethylhydroxylamine (DMHAN) and methylhydrazine (MMH) in 1BP solution could be oxidized with much less N{sub 2}O{sub 4} consumption.

  7. On Quantum Field Theories in Operator and Functional Integral Formalisms

    CERN Document Server

    Teleki, A; Noga, Milan; Teleki, Aba

    2006-01-01

    Relations and isomorphisms between quantum field theories in operator and functional integral formalisms are analyzed from the viewpoint of inequivalent representations of commutator or anticommutator rings of field operators. A functional integral in quantum field theory cannot be regarded as a Newton-Lebesgue integral but rather as a formal object to which one associates distinct numerical values for different processes of its integration. By choosing an appropriate method for the integration of a given functional integral, one can select a single representation out of infinitely many inequivalent representations for an operator whose trace is expressed by the corresponding functional integral. These properties are demonstrated with two exactly solvable examples.

  8. Roll-to-roll embedded conductive structures integrated into organic photovoltaic devices.

    Science.gov (United States)

    van de Wiel, H J; Galagan, Y; van Lammeren, T J; de Riet, J F J; Gilot, J; Nagelkerke, M G M; Lelieveld, R H C A T; Shanmugam, S; Pagudala, A; Hui, D; Groen, W A

    2013-12-06

    Highly conductive screen printed metallic (silver) structures (current collecting grids) combined with poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) are a viable replacement for indium tin oxide (ITO) and inkjet printed silver as transparent electrode materials. To provide successful integration into organic photovoltaic (OPV) devices, screen printed silver current collecting grids should be embedded into a substrate to avoid topology issues. In this study micron-thick conductive structures are embedded and integrated into OPV devices. The embedded structures are produced roll-to-roll with optimized process settings and materials. Topology measurements show that the embedded grids are well suited for integration into OPV devices since the surface is almost without spikes and has low surface roughness. JV measurements of OPV devices with embedded structures on a polyethylene terephthalate/silicon nitride (PET/SiN) substrate show an efficiency of 2.15%, which is significantly higher than identical flexible devices with ITO (1.02%) and inkjet printed silver (1.48%). The use of embedded screen printed silver instead of ITO and inkjet printed silver in OPV devices will allow for higher efficiency devices which can be produced with larger design and process freedom.

  9. String operator formalism and functional integral in holomorphic representation

    Energy Technology Data Exchange (ETDEWEB)

    Losev, A.; Morozov, A.; Rosly, A.; Shatashvili, S.

    1989-01-05

    We discuss the relation between the functional integral over open Riemann surfaces and the operator formalism on closed Riemann surfaces. The states in the latter formalism arise in the holomorphic representation of the functional integral.

  10. Monolithic microwave integrated circuit devices for active array antennas

    Science.gov (United States)

    Mittra, R.

    1984-01-01

    Two different aspects of active antenna array design were investigated. The transition between monolithic microwave integrated circuits and rectangular waveguides was studied along with crosstalk in multiconductor transmission lines. The boundary value problem associated with a discontinuity in a microstrip line is formulated. This entailed, as a first step, the derivation of the propagating as well as evanescent modes of a microstrip line. The solution is derived to a simple discontinuity problem: change in width of the center strip. As for the multiconductor transmission line problem. A computer algorithm was developed for computing the crosstalk noise from the signal to the sense lines. The computation is based on the assumption that these lines are terminated in passive loads.

  11. Vertical III-V nanowire device integration on Si(100).

    Science.gov (United States)

    Borg, Mattias; Schmid, Heinz; Moselund, Kirsten E; Signorello, Giorgio; Gignac, Lynne; Bruley, John; Breslin, Chris; Das Kanungo, Pratyush; Werner, Peter; Riel, Heike

    2014-01-01

    We report complementary metal-oxide-semiconductor (CMOS)-compatible integration of compound semiconductors on Si substrates. InAs and GaAs nanowires are selectively grown in vertical SiO2 nanotube templates fabricated on Si substrates of varying crystallographic orientations, including nanocrystalline Si. The nanowires investigated are epitaxially grown, single-crystalline, free from threading dislocations, and with an orientation and dimension directly given by the shape of the template. GaAs nanowires exhibit stable photoluminescence at room temperature, with a higher measured intensity when still surrounded by the template. Si-InAs heterojunction nanowire tunnel diodes were fabricated on Si(100) and are electrically characterized. The results indicate a high uniformity and scalability in the fabrication process.

  12. Integrating nanostructured electrodes in organic photovoltaic devices for enhancing near-infrared photoresponse

    Energy Technology Data Exchange (ETDEWEB)

    Nardes, Alexandre M.; Ahn, Sungmo; Rourke, Devin; Mao, Chenchen; van de Lagemaat, Jao; Ferguson, Andrew J.; Park, Wounjhang; Kopidakis, Nikos

    2016-12-01

    We introduce a simple methodology to integrate prefabricated nanostructured-electrodes in solution-processed organic photovoltaic (OPV) devices. The tailored 'photonic electrode' nanostructure is used for light management in the device and for hole collection. This approach opens up new possibilities for designing photonically active structures that can enhance the absorption of sub-bandgap photons in the active layer. We discuss the design, fabrication and characterization of photonic electrodes, and the methodology for integrating them to OPV devices using a simple lamination technique. We demonstrate theoretically and experimentally that OPV devices using photonic electrodes show a factor of ca. 5 enhancement in external quantum efficiency (EQE) in the near infrared region. We use simulations to trace this observed efficiency enhancement to surface plasmon polariton modes in the nanostructure.

  13. TiO2 nanowires for potential facile integration of solar cells and electrochromic devices.

    Science.gov (United States)

    Qiang, Pengfei; Chen, Zhongwei; Yang, Peihua; Cai, Xiang; Tan, Shaozao; Liu, Pengyi; Mai, Wenjie

    2013-11-01

    Self-powered systems usually consist of energy-acquisition components, energy-storage components and functional components. The development of nanoscience and nanotechnology has greatly improved the performance of all the components of self-powered systems. However, huge differences in the materials and configurations in the components cause large difficulties for integration and miniaturization of self-powered systems. Design and fabrication of different components in a self-powered system with the same or similar materials/configurations should be able to make the above goal easier. In this work, a proof-of-concept experiment involving an integrated self-powered color-changing system consisting of TiO2 nanowire based sandwich dye-sensitized solar cells (DSSCs) and electrochromic devices (ECDs) is designed and demonstrated. When sunlight illuminates the entire system, the DSSCs generate electrical power and turn the ECD to a darker color, dimming the light; by switching the connection polarity of the DSSCs, the lighter color can be regained, implying the potential application of this self-powered color-changing system for next generation sun glasses and smart windows.

  14. TiO2 nanowires for potential facile integration of solar cells and electrochromic devices

    Science.gov (United States)

    Qiang, Pengfei; Chen, Zhongwei; Yang, Peihua; Cai, Xiang; Tan, Shaozao; Liu, Pengyi; Mai, Wenjie

    2013-11-01

    Self-powered systems usually consist of energy-acquisition components, energy-storage components and functional components. The development of nanoscience and nanotechnology has greatly improved the performance of all the components of self-powered systems. However, huge differences in the materials and configurations in the components cause large difficulties for integration and miniaturization of self-powered systems. Design and fabrication of different components in a self-powered system with the same or similar materials/configurations should be able to make the above goal easier. In this work, a proof-of-concept experiment involving an integrated self-powered color-changing system consisting of TiO2 nanowire based sandwich dye-sensitized solar cells (DSSCs) and electrochromic devices (ECDs) is designed and demonstrated. When sunlight illuminates the entire system, the DSSCs generate electrical power and turn the ECD to a darker color, dimming the light; by switching the connection polarity of the DSSCs, the lighter color can be regained, implying the potential application of this self-powered color-changing system for next generation sun glasses and smart windows.

  15. GaN-on-diamond electronic device reliability: Mechanical and thermo-mechanical integrity

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Dong [Center for Device Thermography and Reliability, H.H. Wills Physics Laboratory, University of Bristol, Bristol BS8 1TL (United Kingdom); Interface Analysis Center, H.H. Wills Physics Laboratory, University of Bristol, Bristol BS8 1TL (United Kingdom); Sun, Huarui; Pomeroy, James W.; Kuball, Martin, E-mail: Martin.Kuball@bristol.ac.uk [Center for Device Thermography and Reliability, H.H. Wills Physics Laboratory, University of Bristol, Bristol BS8 1TL (United Kingdom); Francis, Daniel; Faili, Firooz; Twitchen, Daniel J. [Element-Six Technologies, Santa Clara, California 95054 (United States)

    2015-12-21

    The mechanical and thermo-mechanical integrity of GaN-on-diamond wafers used for ultra-high power microwave electronic devices was studied using a micro-pillar based in situ mechanical testing approach combined with an optical investigation of the stress and heat transfer across interfaces. We find the GaN/diamond interface to be thermo-mechanically stable, illustrating the potential for this material for reliable GaN electronic devices.

  16. Assistive Devices for Children with Functional Impairments: Impact on Child and Caregiver Function

    Science.gov (United States)

    Henderson, Stacey; Skelton, Heather; Rosenbaum, Peter

    2008-01-01

    Functional impairments can limit a child's ability to participate in the experiences of childhood. This "deprivation" can, in turn, have a negative effect on such children's development, academic performance, and quality of life, as well as on the lives of their caregivers and families. Many adults use assistive devices to overcome functional…

  17. Certain Integral Transform and Fractional Integral Formulas for the Generalized Gauss Hypergeometric Functions

    Directory of Open Access Journals (Sweden)

    Junesang Choi

    2014-01-01

    Full Text Available A remarkably large number of integral transforms and fractional integral formulas involving various special functions have been investigated by many authors. Very recently, Agarwal gave some integral transforms and fractional integral formulas involving the Fp(α,β(·. In this sequel, using the same technique, we establish certain integral transforms and fractional integral formulas for the generalized Gauss hypergeometric functions Fp(α,β,m(·. Some interesting special cases of our main results are also considered.

  18. Carbazole functionalized isocyanide brushes in heterojunction photovoltaic devices

    NARCIS (Netherlands)

    Lim, E.; Gao, F.; Schwartz, E.; Cornelissen, J.J.L.M.; Nolte, R.J.M.; Rowan, A.E.; Greenham, N.C.; Do, L.M.

    2012-01-01

    In this work, carbazole-containing polyisocyanide (PIACz) brushes were used for photovoltaic devices. A photovoltaic device was fabricated on top of the brushes by spin-coating a suitable acceptor and evaporating an Al cathode. Devices with a poly(N-vinylcarbazole) (PVK) bulk polymer were also prepa

  19. Microfluidic device for continuous single cells analysis via Raman spectroscopy enhanced by integrated plasmonic nanodimers

    DEFF Research Database (Denmark)

    Perozziello, Gerardo; Candeloro, Patrizio; De Grazia, Antonio

    2016-01-01

    In this work a Raman flow cytometer is presented. It consists of a microfluidic device that takes advantages of the basic principles of Raman spectroscopy and flow cytometry. The microfluidic device integrates calibrated microfluidic channels-where the cells can flow one-by-one -, allowing single...... cell Raman analysis. The microfluidic channel integrates plasmonic nanodimers in a fluidic trapping region. In this way it is possible to perform Enhanced Raman Spectroscopy on single cell. These allow a label-free analysis, providing information about the biochemical content of membrane and cytoplasm...

  20. AREA INTEGRAL FUNCTIONS FOR SECTORIAL OPERATORS ON Lp SPACES

    Institute of Scientific and Technical Information of China (English)

    陈泽亁; 孙牧

    2014-01-01

    Area integral functions are introduced for sectorial operators on Lp-spaces. We establish the equivalence between the square and area integral functions for sectorial operators on Lp spaces. This follows that the results of Cowling, Doust, McIntosh, Yagi, and Le Merdy on H∞ functional calculus of sectorial operators on Lp-spaces hold true when the square functions are replaced by the area integral functions.

  1. XML Data Integrity Based on Concatenated Hash Function

    CERN Document Server

    Liu, Baolong; Yip, Jim

    2009-01-01

    Data integrity is the fundamental for data authentication. A major problem for XML data authentication is that signed XML data can be copied to another document but still keep signature valid. This is caused by XML data integrity protecting. Through investigation, the paper discovered that besides data content integrity, XML data integrity should also protect element location information, and context referential integrity under fine-grained security situation. The aim of this paper is to propose a model for XML data integrity considering XML data features. The paper presents an XML data integrity model named as CSR (content integrity, structure integrity, context referential integrity) based on a concatenated hash function. XML data content integrity is ensured using an iterative hash process, structure integrity is protected by hashing an absolute path string from root node, and context referential integrity is ensured by protecting context-related elements. Presented XML data integrity model can satisfy int...

  2. Area integral functions and $H^{\\8}$ functional calculus for sectorial operators on Hilbert spaces

    OpenAIRE

    Chen, Zeqian; Sun, Mu

    2012-01-01

    Area integral functions are introduced for sectorial operators on Hilbert spaces. We establish the equivalence relationship between the square and area integral functions. This immediately extends McIntosh/Yagi's results on $H^{\\8}$ functional calculus of sectorial operators on Hilbert spaces to the case when the square functions are replaced by the area integral functions.

  3. Multimodal functional neuroimaging: integrating functional MRI and EEG/MEG.

    Science.gov (United States)

    He, Bin; Liu, Zhongming

    2008-01-01

    Noninvasive functional neuroimaging, as an important tool for basic neuroscience research and clinical diagnosis, continues to face the need of improving the spatial and temporal resolution. While existing neuroimaging modalities might approach their limits in imaging capability mostly due to fundamental as well as technical reasons, it becomes increasingly attractive to integrate multiple complementary modalities in an attempt to significantly enhance the spatiotemporal resolution that cannot be achieved by any modality individually. Electrophysiological and hemodynamic/metabolic signals reflect distinct but closely coupled aspects of the underlying neural activity. Combining fMRI and EEG/MEG data allows us to study brain function from different perspectives. In this review, we start with an overview of the physiological origins of EEG/MEG and fMRI, as well as their fundamental biophysics and imaging principles, we proceed with a review of the major advances in the understanding and modeling of neurovascular coupling and in the methodologies for the fMRI-EEG/MEG simultaneous recording. Finally, we summarize important remaining issues and perspectives concerning multimodal functional neuroimaging, including brain connectivity imaging.

  4. 78 FR 16707 - Certain Electronic Devices Having Placeshifting or Display Replication Functionality and Products...

    Science.gov (United States)

    2013-03-18

    .... International Trade Commission has received a complaint entitled Certain Electronic Devices Having Placeshifting... From the Federal Register Online via the Government Publishing Office ] INTERNATIONAL TRADE COMMISSION Certain Electronic Devices Having Placeshifting or Display Replication Functionality and...

  5. Novel planarization and passivation in the integration of III-V semiconductor devices

    Science.gov (United States)

    Zheng, Jun-Fei; Hanberg, Peter J.; Demir, Hilmi V.; Sabnis, Vijit A.; Fidaner, Onur; Harris, James S., Jr.; Miller, David A. B.

    2004-06-01

    III-V semiconductor devices typically use structures grown layer-by-layer and require passivation of sidewalls by vertical etching to reduce leakage current. The passivation is conventionally achieved by sealing the sidewalls using polymer and the polymer needs to be planarized by polymer etch-back method to device top for metal interconnection. It is very challenging to achieve perfect planarization needed for sidewalls of all the device layers including the top layer to be completely sealed. We introduce a novel hard-mask-assisted self-aligned planarization process that allows the polymer in 1-3 μm vicinity of the devices to be planarized perfectly to the top of devices. The hard-mask-assisted process also allows self-aligned via formation for metal interconnection to device top of μm size. The hard mask is removed to expose a very clean device top surface for depositing metals for low ohmic contact resistance metal interconnection. The process is robust because it is insensitive to device height difference, spin-on polymer thickness variation, and polymer etch non-uniformity. We have demonstrated high yield fabrication of monolithically integrated optical switch arrays with mesa diodes and waveguide electroabsorption modulators on InP substrate with yield > 90%, high breakdown voltage of > 15 Volts, and low ohmic contact resistance of 10-20 Ω.

  6. Vertically Aligned Nanostructured Arrays of Inorganic Materials: Synthesis, Distinctive Physical Phenomena, and Device Integration

    Science.gov (United States)

    Velazquez, Jesus Manuel

    materials to obtain a fundamental understanding of the influence of finite size and surface restructuring on electronic instabilities in the proximity of the Fermi level. We present here a novel synthetic approach that takes advantage of the intrinsic octahedral symmetry of rock-salt-structured VO to facilitate the growth of six-armed nanocrystallites of related, technologically more important binary vanadium oxide V2O5 . The prepared nanostructures exhibit clear six-fold symmetry and most notably show remarkable retention of electronic structure. The latter has been evidenced through extensive X-ray absorption spectroscopy measurements. We have further designed a facile, generalizable, and entirely scalable approach for the fabrication of vertically aligned arrays of Fe2O 3/polypyrrole core---shell nanostructures and polypyrrole nanotubes. Our "all electrochemical" approach is based on the fabrication of α-Fe 2O3 nanowire arrays by the simple heat treatment of commodity low carbon steel substrates, followed by electropolymerization of conformal polypyrrole sheaths around the nanowires. Subsequently, electrochemical etching of the nanowires yields large-area vertically aligned polypyrrole nanotube arrays on the steel substrate. The developed methodology is generalizable to functionalized pyrrole monomers and represents a significant practical advance of relevance to the technological implementation of conjugated polymer nanostructures in electrochromics, electrochemical energy storage, and sensing. As another variation of this general synthetic route, we have extended the practice of our simple oxidative process for the fabrication of large-area ZnO nanostructures, specifically highly aligned nanowire arrays integrated onto galvanized steel substrates which via a simple device design and additive piezoelectric nanopower generation were measured across the array substrates. The nanomaterial syntheses and device fabrication approaches developed here will enable facile

  7. Oscillatory integrals for phase functions having certain degenerate critical points

    Institute of Scientific and Technical Information of China (English)

    Jinmyong KIM; ZHENG Quan

    2008-01-01

    The paper is concerned with oscillatory integrals for phase functions having certain de-generate critical points. Under a finite type condition of phase functions we show the estimate of oscillatory integrals of the first kind. The decay of the oscillatory integral depends on indices of the finite type, the spatial dimension and the symbol.

  8. Oscillatory integrals for phase functions having certain degenerate critical points

    Institute of Scientific and Technical Information of China (English)

    Jinmyong; KIM

    2008-01-01

    The paper is concerned with oscillatory integrals for phase functions having certain de- generate critical points. Under a finite type condition of phase functions we show the estimate of oscillatory integrals of the first kind. The decay of the oscillatory integral depends on indices of the finite type, the spatial dimension and the symbol.

  9. The Numerical Integration of Discrete Functions on a Triangular Element

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    With the application of Hammer integral formulas of a continuousfunction on a triangular element, the numerical integral formulas of some discrete functions on the element are derived by means of decomposition and recombination of base functions. Hammer integral formulas are the special examples of those of the paper.

  10. A City Parking Integration System Combined with Cloud Computing Technologies and Smart Mobile Devices

    Science.gov (United States)

    Yeh, Her-Tyan; Chen, Bing-Chang; Wang, Bo-Xun

    2016-01-01

    The current study applied cloud computing technology and smart mobile devices combined with a streaming server for parking lots to plan a city parking integration system. It is also equipped with a parking search system, parking navigation system, parking reservation service, and car retrieval service. With this system, users can quickly find…

  11. Integration of a waveguide self-electrooptic effect device and a vertically coupled interconnect waveguide

    Science.gov (United States)

    Vawter, G. Allen

    2008-02-26

    A self-electrooptic effect device ("SEED") is integrated with waveguide interconnects through the use of vertical directional couplers. Light initially propagating in the interconnect waveguide is vertically coupled to the active waveguide layer of the SEED and, if the SEED is in the transparent state, the light is coupled back to the interconnect waveguide.

  12. 78 FR 10635 - Certain Integrated Circuit Devices and Products Containing the Same; Notice of Receipt of...

    Science.gov (United States)

    2013-02-14

    ...Notice is hereby given that the U.S. International Trade Commission has received a complaint entitled Certain Integrated Circuit Devices and Products Containing the Same, DN 2938; the Commission is soliciting comments on any public interest issues raised by the complaint or complainant's filing under section 210.8(b) of the Commission's Rules of Practice and Procedure (19 CFR...

  13. A Microfluidic Device with an Integrated Waveguide Beam Splitter for Velocity Measurements of Flowing Particles by Fourier Transformation

    DEFF Research Database (Denmark)

    Mogensen, Klaus Bo; Kwok, Y.C.; Eijkel, J.C.T.

    2003-01-01

    A microfabricated capillary electrophoresis device for velocity measurements of flowing particles is presented. It consists of a 1 x 128 planar waveguide beam splitter monolithically integrated with an electrically insulated fluidic channel network for fluorescence excitation at multiple points...... optics. The integrated planar waveguide beam splitter was, furthermore, permanently connected to the light source by a glued-on optical fiber, to achieve a robust and alignment-free operation of the system. The velocity was measured using a Fourier transformation with a Shah function, since the response...... of the fight array was designed to approximate a square profile. Deviations from this response were observed as a result of the multimode nature of the integrated waveguides....

  14. Research progresses of SOI optical waveguide devices and integrated optical switch matrix

    Institute of Scientific and Technical Information of China (English)

    YU Jinzhong; CHEN Shaowu; XIA Jinsong; WANG Zhangtao; FAN Zhongchao; LI Yanping; LIU Jingwei; YANG Di; CHEN Yuanyuan

    2005-01-01

    SOI (silicon-on-insulator) is a new material with a lot of important perform- ances such as large index difference, low transmission loss. Fabrication processes for SOI based optoelectronic devices are compatible with conventional IC processes. Having the potential of OEIC monolithic integration, SOI based optoelectronic devices have shown many good characteristics and become more and more attractive recently. In this paper, the recent progresses of SOI waveguide devices in our research group are presented. By highly effective numerical simulation, the single mode conditions for SOI rib waveguides with rectangular and trapezoidal cross-section were accurately investigated. Using both chemical anisotropic wet etching and plasma dry etching techniques, SOI single mode rib waveguide, MMI coupler, VOA (variable optical attenuator), 2×2 thermal-optical switch were successfully designed and fabricated. Based on these, 4×4 and 8×8 SOI optical waveguide integrated switch matrixes are demonstrated for the first time.

  15. Plasmonic and electronic device-based integrated circuits and their characteristics

    Science.gov (United States)

    Sakai, H.; Okahisa, S.; Nakayama, Y.; Nakayama, K.; Fukuhara, M.; Kimura, Y.; Ishii, Y.; Fukuda, M.

    2016-11-01

    This paper presents a plasmonic circuit that has been monolithically integrated with electronic devices on a silicon substrate and then discusses the concept behind this circuit. To form the proposed circuit, two plasmonic waveguides and a detector are integrated with metal-oxide-semiconductor field-effect transistors (MOSFETs) on the substrate. In the circuit, intensity signals or coherent plasmonic signals are generated by coherent light at an operating wavelength at which silicon is transparent, and these signals propagate along the waveguides before they are converted into electrical signals by the detector. These electrical intensity and coherent signals then drive the MOSFETs during both DC and AC operation. The measured performances of the devices indicate that surface plasmon polaritons propagate on the metal surface at the speed of light and drive the electronic devices without any absorption in the silicon.

  16. An architecture for integrating planar and 3D cQED devices

    Science.gov (United States)

    Axline, C.; Reagor, M.; Heeres, R.; Reinhold, P.; Wang, C.; Shain, K.; Pfaff, W.; Chu, Y.; Frunzio, L.; Schoelkopf, R. J.

    2016-07-01

    Numerous loss mechanisms can limit coherence and scalability of planar and 3D-based circuit quantum electrodynamics (cQED) devices, particularly due to their packaging. The low loss and natural isolation of 3D enclosures make them good candidates for coherent scaling. We introduce a coaxial transmission line device architecture with coherence similar to traditional 3D cQED systems. Measurements demonstrate well-controlled external and on-chip couplings, a spectrum absent of cross-talk or spurious modes, and excellent resonator and qubit lifetimes. We integrate a resonator-qubit system in this architecture with a seamless 3D cavity, and separately pattern a qubit, readout resonator, Purcell filter, and high-Q stripline resonator on a single chip. Device coherence and its ease of integration make this a promising tool for complex experiments.

  17. Integrated Photoelectrochemical Solar Energy Conversion and Organic Redox Flow Battery Devices.

    Science.gov (United States)

    Li, Wenjie; Fu, Hui-Chun; Li, Linsen; Cabán-Acevedo, Miguel; He, Jr-Hau; Jin, Song

    2016-10-10

    Building on regenerative photoelectrochemical solar cells and emerging electrochemical redox flow batteries (RFBs), more efficient, scalable, compact, and cost-effective hybrid energy conversion and storage devices could be realized. An integrated photoelectrochemical solar energy conversion and electrochemical storage device is developed by integrating regenerative silicon solar cells and 9,10-anthraquinone-2,7-disulfonic acid (AQDS)/1,2-benzoquinone-3,5-disulfonic acid (BQDS) RFBs. The device can be directly charged by solar light without external bias, and discharged like normal RFBs with an energy storage density of 1.15 Wh L(-1) and a solar-to-output electricity efficiency (SOEE) of 1.7 % over many cycles. The concept exploits a previously undeveloped design connecting two major energy technologies and promises a general approach for storing solar energy electrochemically with high theoretical storage capacity and efficiency.

  18. Sub-10 nm colloidal lithography for circuit-integrated spin-photo-electronic devices.

    Science.gov (United States)

    Iovan, Adrian; Fischer, Marco; Lo Conte, Roberto; Korenivski, Vladislav

    2012-01-01

    Patterning of materials at sub-10 nm dimensions is at the forefront of nanotechnology and employs techniques of various complexity, efficiency, areal scale, and cost. Colloid-based patterning is known to be capable of producing individual sub-10 nm objects. However, ordered, large-area nano-arrays, fully integrated into photonic or electronic devices have remained a challenging task. In this work, we extend the practice of colloidal lithography to producing large-area sub-10 nm point-contact arrays and demonstrate their circuit integration into spin-photo-electronic devices. The reported nanofabrication method should have broad application areas in nanotechnology as it allows ballistic-injection devices, even for metallic materials with relatively short characteristic relaxation lengths.

  19. Sub-10 nm colloidal lithography for circuit-integrated spin-photo-electronic devices

    Directory of Open Access Journals (Sweden)

    Adrian Iovan

    2012-12-01

    Full Text Available Patterning of materials at sub-10 nm dimensions is at the forefront of nanotechnology and employs techniques of various complexity, efficiency, areal scale, and cost. Colloid-based patterning is known to be capable of producing individual sub-10 nm objects. However, ordered, large-area nano-arrays, fully integrated into photonic or electronic devices have remained a challenging task. In this work, we extend the practice of colloidal lithography to producing large-area sub-10 nm point-contact arrays and demonstrate their circuit integration into spin-photo-electronic devices. The reported nanofabrication method should have broad application areas in nanotechnology as it allows ballistic-injection devices, even for metallic materials with relatively short characteristic relaxation lengths.

  20. Sub-10 nm colloidal lithography for circuit-integrated spin-photo-electronic devices

    Science.gov (United States)

    Iovan, Adrian; Fischer, Marco; Lo Conte, Roberto

    2012-01-01

    Summary Patterning of materials at sub-10 nm dimensions is at the forefront of nanotechnology and employs techniques of various complexity, efficiency, areal scale, and cost. Colloid-based patterning is known to be capable of producing individual sub-10 nm objects. However, ordered, large-area nano-arrays, fully integrated into photonic or electronic devices have remained a challenging task. In this work, we extend the practice of colloidal lithography to producing large-area sub-10 nm point-contact arrays and demonstrate their circuit integration into spin-photo-electronic devices. The reported nanofabrication method should have broad application areas in nanotechnology as it allows ballistic-injection devices, even for metallic materials with relatively short characteristic relaxation lengths. PMID:23365801

  1. Integrated Photoelectrochemical Solar Energy Conversion and Organic Redox Flow Battery Devices

    KAUST Repository

    Li, Wenjie

    2016-09-21

    Building on regenerative photoelectrochemical solar cells and emerging electrochemical redox flow batteries (RFBs), more efficient, scalable, compact, and cost-effective hybrid energy conversion and storage devices could be realized. An integrated photoelectrochemical solar energy conversion and electrochemical storage device is developed by integrating regenerative silicon solar cells and 9,10-anthraquinone-2,7-disulfonic acid (AQDS)/1,2-benzoquinone-3,5-disulfonic acid (BQDS) RFBs. The device can be directly charged by solar light without external bias, and discharged like normal RFBs with an energy storage density of 1.15 Wh L−1 and a solar-to-output electricity efficiency (SOEE) of 1.7 % over many cycles. The concept exploits a previously undeveloped design connecting two major energy technologies and promises a general approach for storing solar energy electrochemically with high theoretical storage capacity and efficiency.

  2. Quasi-one dimensional (Q1D) nanostructures: Synthesis, integration and device application

    Science.gov (United States)

    Chien, Chung-Jen

    Quasi-one-dimensional (Q1D) nanostructures such as nanotubes and nanowires have been widely regarded as the potential building blocks for nanoscale electronic, optoelectronic and sensing devices. In this work, the content can be divided into three categories: Nano-material synthesis and characterizations, alignment and integration, physical properties and application. The dissertation consists of seven chapters as following. Chapter 1 will give an introduction to low dimensional nano-materials. Chapter 2 explains the mechanism how Q1D nanostructure grows. Chapter 3 describes the methods how we horizontally and vertically align the Q1D nanostructure. Chapter 4 and 5 are the electrical and optical device characterization respectively. Chapter 6 demonstrates the integration of Q1D nanostructures and the device application. The last chapter will discuss the future work and conclusion of the thesis.

  3. Organic nanofibers integrated by transfer technique in field-effect transistor devices

    DEFF Research Database (Denmark)

    Tavares, Luciana; Kjelstrup-Hansen, Jakob; Thilsing-Hansen, Kasper;

    2011-01-01

    The electrical properties of self-assembled organic crystalline nanofibers are studied by integrating these on field-effect transistor platforms using both top and bottom contact configurations. In the staggered geometries, where the nanofibers are sandwiched between the gate and the source-drain...... light on the charge injection and transport properties for such organic nanostructures and thus constitute a significant step forward towards a nanofiber-based light-emitting device.......-drain electrodes, a better electrical conduction is observed compared to the coplanar geometry where the nanofibers are placed over the gate and the source-drain electrodes. Qualitatively different output characteristics were observed for top and bottom contact devices reflecting the significantly different...... contact resistances. Bottom contact devices are dominated by contact effects while the top contact device characteristics are determined by the nanofiber bulk properties. It is found that the contact resistance is lower for crystalline nanofibers when compared to amorphous thin films. These results shed...

  4. Pressure-driven microfluidic perfusion culture device for integrated dose-response assays.

    Science.gov (United States)

    Hattori, Koji; Sugiura, Shinji; Kanamori, Toshiyuki

    2013-12-01

    Cell-based assays are widely used in the various stages of drug discovery. Advances in microfluidic systems over the past two decades have enabled them to become a powerful tool for cell-based assays to achieve both reliability and high throughput. The interface between the micro-world and macro-world is important in industrial assay processes. Therefore, microfluidic cell-based assays using pressure-driven liquid handling are an ideal platform for integrated assays. The aim of this article is to review recent advancements in microfluidic cell-based assays focusing on a pressure-driven perfusion culture device. Here, we review the development of microfluidic cell-based assay devices and discuss the techniques involved in designing a microfluidic network, device fabrication, liquid and cell manipulation, and detection schemes for pressure-driven perfusion culture devices. Finally, we describe recent progress in semiautomatic and reliable pressure-driven microfluidic cell-based assays.

  5. Integration of human factors and ergonomics during medical device design and development: it's all about communication.

    Science.gov (United States)

    Vincent, Christopher James; Li, Yunqiu; Blandford, Ann

    2014-05-01

    Manufacturers of interactive medical devices, such as infusion pumps, need to ensure that devices minimise the risk of unintended harm during use. However, development teams face challenges in incorporating Human Factors. The aim of the research reported here was to better understand the constraints under which medical device design and development take place. We report the results of a qualitative study based on 19 semi-structured interviews with professionals involved in the design, development and deployment of interactive medical devices. A thematic analysis was conducted. Multiple barriers to designing for safety and usability were identified. In particular, we identified barriers to communication both between the development organisation and the intended users and between different teams within the development organisation. We propose the use of mediating representations. Artefacts such as personas and scenarios, known to provide integration across multiple perspectives, are an essential component of designing for safety and usability.

  6. A flexible and robust soft-error testing system for microelectronic devices and integrated circuits

    Institute of Scientific and Technical Information of China (English)

    王晓辉; 杨振雷; 童腾; 苏弘; 刘杰; 张战刚; 古松; 刘天奇; 孔洁; 赵兴文

    2015-01-01

    Single event effects (SEEs) induced by radiations become a significant reliability challenge for modern elec-tronic systems. To evaluate SEEs susceptibility for microelectronic devices and integrated circuits (ICs), an SEE testing system with flexibility and robustness was developed at Heavy Ion Research Facility in Lanzhou (HIRFL). The system is compatible with various types of microelectronic devices and ICs, and supports plenty of complex and high-speed test schemes and plans for the irradiated devices under test (DUTs). Thanks to the combination of meticulous circuit design and the hardened logic design, the system has additional performances to avoid an overheated situation and irradiations by stray radiations. The system has been tested and verified by experiments for irradiating devices at HIRFL.

  7. Self-modulated field electron emitter: Gated device of integrated Si tip-on-nano-channel

    Science.gov (United States)

    Huang, Zhijun; Huang, Yifeng; Pan, Zhangxu; She, Juncong; Deng, Shaozhi; Chen, Jun; Xu, Ningsheng

    2016-12-01

    We report the featured gated field electron emission devices of Si nano-tips with individually integrated Si nano-channels and the interpretation of the related physics. A rational procedure was developed to fabricate the uniform integrated devices. The electrical and thermal conduction tests demonstrated that the Si nano-channel can limit both the current and heat flows. The integrated devices showed the specialties of self-enhancement and self-regulation. The heat resistance results in the heat accumulation at the tip-apex, inducing the thermally enhanced field electron emission. The self-regulated effect of the electrical resistance is benefit for impeding the current overloading and prevents the emitters from a catastrophic breakdown. The nano-channel-integrated Si nano-tip array exhibited emission current density up to 24.9 mA/cm2 at a gate voltage of 94 V, much higher than that of the Si nano-tip array without an integrated nano-channel.

  8. Analysis of a novel device-level SINS/ACFSS deeply integrated navigation method

    Science.gov (United States)

    Zhang, Hao; Qin, Shiqiao; Wang, Xingshu; Jiang, Guangwen; Tan, Wenfeng; Wu, Wei

    2017-02-01

    The combination of the strap-down inertial navigation system(SINS) and the celestial navigation system(CNS) is one of the popular measures to constitute the integrated navigation system. A star sensor(SS) is used as a precise attitude determination device in CNS. To solve the problem that the star image obtained by SS is motion-blurred under dynamic conditions, the attitude-correlated frames(ACF) approach is presented and the star sensor which works based on ACF approach is named ACFSS. Depending on the ACF approach, a novel device-level SINS/ACFSS deeply integrated navigation method is proposed in this paper. Feedback to the ACF process from the error of the gyro is one of the typical characters of the SINS/CNS deeply integrated navigation method. Herein, simulation results have verified its validity and efficiency in improving the accuracy of gyro and it can be proved that this method is feasible.

  9. Performance analysis of device-level SINS/ACFSS deeply integrated navigation method

    Science.gov (United States)

    Zhang, Hao; Qin, Shiqiao; Wang, Xingshu; Jiang, Guangwen; Tan, Wenfeng

    2016-10-01

    The Strap-Down Inertial Navigation System (SINS) is a widely used navigation system. The combination of SINS and the Celestial Navigation System (CNS) is one of the popular measures to constitute the integrated navigation system. A Star Sensor (SS) is used as a precise attitude determination device in CNS. To solve the problem that the star image obtained by SS under dynamic conditions is motion-blurred, the Attitude Correlated Frames (ACF) is presented and the star sensor which works based on ACF approach is named ACFSS. Depending on the ACF approach, a novel device-level SINS/ACFSS deeply integrated navigation method is proposed in this paper. Feedback to the ACF process from the error of the gyro is one of the typical characters of the SINS/CNS deeply integrated navigation method. Herein, simulation results have verified its validity and efficiency in improving the accuracy of gyro and it can be proved that this method is feasible in theory.

  10. 3D integration of planar crossbar memristive devices with CMOS substrate.

    Science.gov (United States)

    Lin, Peng; Pi, Shuang; Xia, Qiangfei

    2014-10-10

    Planar memristive devices with bottom electrodes embedded into the substrates were integrated on top of CMOS substrates using nanoimprint lithography to implement hybrid circuits with a CMOL-like architecture. The planar geometry eliminated the mechanically and electrically weak parts, such as kinks in the top electrodes in a traditional crossbar structure, and allowed the use of thicker and thus less resistive metal wires as the bottom electrodes. Planar memristive devices integrated with CMOS have demonstrated much lower programing voltages and excellent switching uniformity. With the inclusion of the Moiré pattern, the integration process has sub-20 nm alignment accuracy, opening opportunities for 3D hybrid circuits in applications in the next generation of memory and unconventional computing.

  11. Diamond as a material for monolithically integrated optical and optomechanical devices

    CERN Document Server

    Rath, Patrik; Nebel, Christoph; Pernice, Wolfram H P

    2016-01-01

    Diamond provides superior optical and mechanical material properties, making it a prime candidate for the realization of integrated optomechanical circuits. Because diamond sub- strates have matured in size, efficient nanostructuring methods can be used to realize full-scale integrated devices. Here we review optical and mechanical resonators fab- ricated from polycrystalline as well as single crystalline diamond. We present relevant material properties with respect to implementing optomechanical devices and compare them with other material systems. We give an overview of diamond integrated optomechanical circuits and present the optical readout mechanism and the actuation via optical or electrostatic forces that have been implemented to date. By combining diamond nanophotonic circuits with superconducting nanowires single photons can be efficiently detected on such chips and we outline how future single photon optomechanical circuits can be realized on this platform.

  12. Multi-Functional UV-Visible-IR Nanosensors Devices and Structures

    Science.gov (United States)

    2015-04-29

    AFRL-OSR-VA-TR-2015-0099 MULTI-FUNCTIONAL UV - VISIBLE -IR NANOSENSORS DEVICES AND STRUCTURES Michael Stroscio UNIVERSITY OF ILLINOIS Final Report 04/29...MULTI-FUNCTIONAL UV - VISIBLE -IR NANOSENSORS DEVICES AND STRUCTURES 5a. CONTRACT NUMBER 5b. GRANT NUMBER FA9550-11-1-0271 5c. PROGRAM ELEMENT NUMBER...FUNCTIONAL UV - VISIBLE -IR NANOSENSORS DEVICES AND STRUCTURES," under Grant FA9550-11-1-0271, 1SEPTEMBER 2011 to 28 FEBRUARY 2015

  13. Integrated hybrid polystyrene-polydimethylsiloxane device for monitoring cellular release with microchip electrophoresis and electrochemical detection

    Science.gov (United States)

    Johnson, Alicia S.; Mehl, Benjamin T.; Martin, R. Scott

    2015-01-01

    In this work, a polystyrene (PS)-polydimethylsiloxane (PDMS) hybrid device was developed to enable the integration of cell culture with analysis by microchip electrophoresis and electrochemical detection. It is shown that this approach combines the fundamental advantages of PDMS devices (the ability to integrate pumps and valves) and PS devices (the ability to permanently embed fluidic tubing and electrodes). The embedded fused-silica capillary enables high temporal resolution measurements from off-chip cell culture dishes and the embedded electrodes provide close to real-time analysis of small molecule neurotransmitters. A novel surface treatment for improved (reversible) adhesion between PS and PDMS is described using a chlorotrimethylsilane stamping method. It is demonstrated that a Pd decoupler is efficient at handling the high current (and cathodic hydrogen production) resulting from use of high ionic strength buffers needed for cellular analysis; thus allowing an electrophoretic separation and in-channel detection. The separation of norepinephrine (NE) and dopamine (DA) in highly conductive biological buffers was optimized using a mixed surfactant system. This PS-PDMS hybrid device integrates multiple processes including continuous sampling from a cell culture dish, on-chip pump and valving technologies, microchip electrophoresis, and electrochemical detection to monitor neurotransmitter release from PC 12 cells. PMID:25663849

  14. Integrating Six Sigma into a Quality Management System in the Medical Device Industry

    Directory of Open Access Journals (Sweden)

    Nadica Hrgarek

    2009-06-01

    Full Text Available Normal 0 21 false false false MicrosoftInternetExplorer4 Six Sigma is a valuable management strategy to improve business processes, reduce development and production costs, increase profit margin and improve customer satisfaction. The purpose of this paper is to describe how applicable Six Sigma concepts may complement and support formal quality management systems (QMS in the medical device industry.A significant number of issues, which increase the development costs and times, is often found during different phases of a medical device life cycle. Some defects with high patient safety risk may result in dangerous and very costly product recalls.The basic idea of this paper is to explore the possibilities of integrating Six Sigma techniques with an existing QMS throughout the entire life cycle of a medical device. This paper addresses how Six Sigma techniques, when appropriately integrated into the QMS at medical device companies, can eliminate defects earlier in the medical device life cycle, identify major opportunities for cost savings, focus on customer needs and expectations, and improve the overall business processes.

  15. Uncertain data integration using functional dependencies

    NARCIS (Netherlands)

    Ayat, N.; Afsarmanesh, H.; Akbarinia, R.; Valduriez, P.

    2012-01-01

    Data integration systems are crucial for applications that need to provide a uniform interface to a set of autonomous and heterogeneous data sources. However, setting up a full data integration system for many application contexts, e.g. web and scientifc data management, requires significant human e

  16. Integration of the supersonic kernel function

    CSIR Research Space (South Africa)

    Van Zyl, LH

    1994-11-01

    Full Text Available The article discusses ways in which the integrals resulting from a zero-order discontinuous pressure distribution can be arranged in such a way that they can be solved by either normal quadrature or curve fitting followed by analytical integration...

  17. The Integration of GPS Navigator Device with Vehicles Tracking System for Rental Cars Firms

    OpenAIRE

    Omarah O. Alharaki; Fahad S. Alaieri; Akram M. Zeki

    2010-01-01

    The aim of this research is to integrate the GPS tracking system (tracking device and web-based application) with GPS navigator for rental cars, allowing the company to use various applications to monitor and manage the cars. This is enable the firms and customers to communicate with each other via the GPS navigator. The system should be developed by applying new features in GPS tracking application devices in vehicles. This paper also proposes new features that can be applied to the GPS Navi...

  18. Medical device-related hospital-acquired pressure ulcers in children: an integrative review.

    Science.gov (United States)

    Murray, John S; Noonan, Catherine; Quigley, Sandy; Curley, Martha A Q

    2013-01-01

    The management, cost, physical and emotional suffering associated with pressure ulcers have a significant impact on the health status of patients-especially infants and children. The purpose of this integrative review was to identify factors associated with medical device-related (MDR) hospital acquired pressure ulcers (HAPUs) in the pediatric population. Pediatric MDR HAPUs are becoming more prevalent and require further exploration in terms of describing devices which cause injury and preventive interventions to improve patient outcomes. Opportunities to uncover new methods for addressing this important problem and to inform and advance the state of the science in this evolving area exist.

  19. Integrated Microfluidic Devices for Automated Microarray-Based Gene Expression and Genotyping Analysis

    Science.gov (United States)

    Liu, Robin H.; Lodes, Mike; Fuji, H. Sho; Danley, David; McShea, Andrew

    Microarray assays typically involve multistage sample processing and fluidic handling, which are generally labor-intensive and time-consuming. Automation of these processes would improve robustness, reduce run-to-run and operator-to-operator variation, and reduce costs. In this chapter, a fully integrated and self-contained microfluidic biochip device that has been developed to automate the fluidic handling steps for microarray-based gene expression or genotyping analysis is presented. The device consists of a semiconductor-based CustomArray® chip with 12,000 features and a microfluidic cartridge. The CustomArray was manufactured using a semiconductor-based in situ synthesis technology. The micro-fluidic cartridge consists of microfluidic pumps, mixers, valves, fluid channels, and reagent storage chambers. Microarray hybridization and subsequent fluidic handling and reactions (including a number of washing and labeling steps) were performed in this fully automated and miniature device before fluorescent image scanning of the microarray chip. Electrochemical micropumps were integrated in the cartridge to provide pumping of liquid solutions. A micromixing technique based on gas bubbling generated by electrochemical micropumps was developed. Low-cost check valves were implemented in the cartridge to prevent cross-talk of the stored reagents. Gene expression study of the human leukemia cell line (K562) and genotyping detection and sequencing of influenza A subtypes have been demonstrated using this integrated biochip platform. For gene expression assays, the microfluidic CustomArray device detected sample RNAs with a concentration as low as 0.375 pM. Detection was quantitative over more than three orders of magnitude. Experiment also showed that chip-to-chip variability was low indicating that the integrated microfluidic devices eliminate manual fluidic handling steps that can be a significant source of variability in genomic analysis. The genotyping results showed

  20. Gene Detection in Complex Biological Media Using Semiconductor Nanorods within an Integrated Microfluidic Device.

    Science.gov (United States)

    Bi, Xinyan; Adriani, Giulia; Xu, Yang; Chakrabortty, Sabyasachi; Pastorin, Giorgia; Ho, Han Kiat; Ang, Wee Han; Chan, Yinthai

    2015-10-20

    The salient optical properties of highly luminescent semiconductor nanocrystals render them ideal fluorophores for clinical diagnostics, therapeutics, and highly sensitive biochip applications. Microfluidic systems allow miniaturization and integration of multiple biochemical processes in a single device and do not require sophisticated diagnostic tools. Herein, we describe a microfluidic system that integrates RNA extraction, reverse transcription to cDNA, amplification and detection within one integrated device to detect histidine decarboxylase (HDC) gene directly from human white blood cells samples. When anisotropic semiconductor nanorods (NRs) were used as the fluorescent probes, the detection limit was found to be 0.4 ng of total RNA, which was much lower than that obtained using spherical quantum dots (QDs) or organic dyes. This was attributed to the large action cross-section of NRs and their high probability of target capture in a pull-down detection scheme. The combination of large scale integrated microfluidics with highly fluorescent semiconductor NRs may find widespread utility in point-of-care devices and multitarget diagnostics.

  1. Semitransparent Functional Devices using PEDOT and/or ZnO Heterostructures

    OpenAIRE

    Rodríguez Moreno, Jorge

    2014-01-01

    This thesis focus on the development of two differentiated devices, using common and interchangeable materials: (1) electronic diodes and (2) electrochemical capacitors, also known as supercapacitors. Special attention was given for these devices to be transparent or at least translucent. This work is proposed as a first step in a way to achieve a single device having shared materials as well as integrating energy generation (solar cells) with storing of the produced energy (supercapacitor). ...

  2. An Integrated Quantum Dot Barcode Smartphone Optical Device for Wireless Multiplexed Diagnosis of Infected Patients

    Science.gov (United States)

    Ming, Kevin

    Integrating mobile-cellular devices with multiplex molecular diagnostics can potentially provide the most powerful platform for tracking, managing and preventing the transmission of infectious diseases. With over 6.9 billion subscriptions globally, handheld mobile-cellular devices can be programmed to spatially map, temporally track, and transmit information on infections over wide geographical space and boundaries. Current cell phone diagnostic technologies have poor limit of detection, dynamic range, and cannot detect multiple pathogen targets simultaneously, limiting their utility to single infections with high load. Here we combined recent advances in quantum dot barcode technology for molecular detection with smartphones to engineer a simple and low-cost chip-based wireless multiplex diagnostic device. We validated our device using a variety of synthetic genomic targets for the respiratory virus and blood-borne pathogens, and demonstrated that it could detect clinical samples after simple amplification. More importantly, we confirmed that the device is capable of detecting patients infected with a single or multiple infectious pathogens (e.g., HIV and hepatitis B) in a single test. This device advances the capacity for global surveillance of infectious diseases and has the potential to accelerate knowledge exchange-transfer of emerging or exigent disease threats with healthcare and military organizations in real-time.

  3. Existence Theorem for Integral and Functional Integral Equations with Discontinuous Kernels

    OpenAIRE

    2012-01-01

    Existence of extremal solutions of nonlinear discontinuous integral equations of Volterra type is proved. This result is extended herein to functional Volterra integral equations (FVIEs) and to a system of discontinuous VIEs as well.

  4. Reexamination of molecular integrals arising from the Dirac equation. Analytical evaluation of molecular auxiliary functions integrals

    CERN Document Server

    Bagci, A

    2016-01-01

    The author in his previous works were presented a numerical integration method, namely, global-adaptive with the Gauss-Kronrod numerical integration extension in order to accurate calculation of molecular auxiliary functions integrals involve power functions with non-integer exponents. They are constitute elements of molecular integrals arising in Dirac equation when Slater-type orbitals with non-integer principal quantum numbers are used. Binomial series representation of power functions method, so far, is used for analytical evaluation of the molecular auxiliary function integrals however, intervals of integration cover areas beyond the condition of convergence. In the present study, analytical evaluation of these integrals is re-examined. They are expressed via prolate spheroidal coordinates. An alternative analytical approximation are derived. Slowly convergent binomial series representation formulae for power functions is investigated through nonlinear sequence transformations for the acceleration of con...

  5. Weighted hardy type integral inequalities involving many functions

    Directory of Open Access Journals (Sweden)

    Sabir Hussain

    2012-06-01

    Full Text Available The object of this paper is to derive some new weighted Hardy type integral inequalities involving many functions and to obtain a classical weighted Hardy type inequality involving many functions.

  6. Integral representations for computing real parabolic cylinder functions

    NARCIS (Netherlands)

    Gil, A.; Segura, J.; Temme, N.M.

    2005-01-01

    Integral representations are derived for the parabolic cylinder functions U(a,x), V(a,x) and W(a,x) and their derivatives. The new integrals will be used in numerical algorithms based on quadrature. They follow from contour integrals in the complex plane, by using methods from asymptotic analysis (s

  7. Integrated power devices with three-dimensional connection for automation systems

    Science.gov (United States)

    Liniychuk, I. A.; Strashnov, A. A.; Zelisko, V. S.

    1984-09-01

    Two integrated semiconductor power devices utilizing the physical characteristics of three-dimensional processes in PNPN structures during switching are the multiposition switch and the forwistor. The former is a chain of PNPN elements closely spaced apart in a single chip with three-dimensional coupling. In the multiposition switch the density of the tangential control current increases with increasing current in the ON element until that current reaches its critical level for switching. In the forwistor a control current pulse turns on the first section and then the other. The forwistor is switched off by reversal of the polarity of the applied voltage. This device can be used as amplitude-to-time converter. Its numerous applications as a simple and reliable device in automatic control systems include secondary power supplies, triple-loop voltage regulation, two-step power regulation, protection of primary and secondary power supplies, inspection and fault indication.

  8. Encapsulation of graphene transistors and vertical device integration by interface engineering with atomic layer deposited oxide

    Science.gov (United States)

    Alexander-Webber, Jack A.; Sagade, Abhay A.; Aria, Adrianus I.; Van Veldhoven, Zenas A.; Braeuninger-Weimer, Philipp; Wang, Ruizhi; Cabrero-Vilatela, Andrea; Martin, Marie-Blandine; Sui, Jinggao; Connolly, Malcolm R.; Hofmann, Stephan

    2017-03-01

    We demonstrate a simple, scalable approach to achieve encapsulated graphene transistors with negligible gate hysteresis, low doping levels and enhanced mobility compared to as-fabricated devices. We engineer the interface between graphene and atomic layer deposited (ALD) Al2O3 by tailoring the growth parameters to achieve effective device encapsulation whilst enabling the passivation of charge traps in the underlying gate dielectric. We relate the passivation of charge trap states in the vicinity of the graphene to conformal growth of ALD oxide governed by in situ gaseous H2O pretreatments. We demonstrate the long term stability of such encapsulation techniques and the resulting insensitivity towards additional lithography steps to enable vertical device integration of graphene for multi-stacked electronics fabrication.

  9. Improved breakdown characteristics of monolithically integrated III-nitride HEMT-LED devices using carbon doping

    Science.gov (United States)

    Liu, Chao; Liu, Zhaojun; Huang, Tongde; Ma, Jun; May Lau, Kei

    2015-03-01

    We report selective growth of AlGaN/GaN high electron mobility transistors (HEMTs) on InGaN/GaN light emitting diodes (LEDs) for monolithic integration of III-nitride HEMT and LED devices (HEMT-LED). To improve the breakdown characteristics of the integrated HEMT-LED devices, carbon doping was introduced in the HEMT buffer by controlling the growth pressure and V/III ratio. The breakdown voltage of the fabricated HEMTs grown on LEDs was enhanced, without degradation of the HEMT DC performance. The improved breakdown characteristics can be attributed to better isolation of the HEMT from the underlying conductive p-GaN layer of the LED structure.

  10. Threshold Voltage of MOSFET Devices Extracted by Normalized Mutual Integral Difference Operator

    Institute of Scientific and Technical Information of China (English)

    HEJin; ZHENGTaolei; ZHANGXing; WANGYangyuan

    2003-01-01

    The threshold voltage of MOSFETs to be extracted by a novel experimental method named the nor-realized mutual integral difference operator has been inves-tigated in this paper. The basic principle of this method is to use the extreme spectral characteristics of the nor-realized mutual integral difference result of the MOSFET transfer characteristics to find the threshold voltage. Ap-plication of this method has also been demonstrated nu-merically in extracting the threshold voltage of MOS de-vices with the different effective channel length and par-asitic series resistance. The results show this method is sensitive to the channel length variation while insensitive to the parasitic resistance component. The extracted re-sults on the threshold voltage of MOSFET devices have been compared with those obtained by the second deriva-tive method and the agreements have been found, showing the advantage of the method presented here.

  11. Microfluidic device for continuous single cells analysis via Raman spectroscopy enhanced by integrated plasmonic nanodimers

    KAUST Repository

    Perozziello, Gerardo

    2015-12-11

    In this work a Raman flow cytometer is presented. It consists of a microfluidic device that takes advantages of the basic principles of Raman spectroscopy and flow cytometry. The microfluidic device integrates calibrated microfluidic channels- where the cells can flow one-by-one -, allowing single cell Raman analysis. The microfluidic channel integrates plasmonic nanodimers in a fluidic trapping region. In this way it is possible to perform Enhanced Raman Spectroscopy on single cell. These allow a label-free analysis, providing information about the biochemical content of membrane and cytoplasm of the each cell. Experiments are performed on red blood cells (RBCs), peripheral blood lymphocytes (PBLs) and myelogenous leukemia tumor cells (K562). © 2015 Optical Society of America.

  12. An integrated and multi-purpose microscope for the characterization of atomically thin optoelectronic devices

    Science.gov (United States)

    De Sanctis, Adolfo; Jones, Gareth F.; Townsend, Nicola J.; Craciun, Monica F.; Russo, Saverio

    2017-05-01

    Optoelectronic devices based on graphene and other two-dimensional (2D) materials, such as transition metal dichalcogenides (TMDs), are the focus of wide research interest. They can be the key to improving bandwidths in telecommunications, capacity in data storage, and new features in consumer electronics, safety devices, and medical equipment. The characterization of these emerging atomically thin materials and devices strongly relies on a set of measurements involving both optical and electronic instrumentation ranging from scanning photocurrent mapping to Raman and photoluminescence (PL) spectroscopy. Furthermore, proof-of-concept devices are usually fabricated from micro-meter size flakes, requiring microscopy techniques to characterize them. Current state-of-the-art commercial instruments offer the ability to characterize individual properties of these materials with no option for the in situ characterization of a wide enough range of complementary optical and electrical properties. Presently, the requirement to switch atomically thin materials from one system to another often radically affects the properties of these uniquely sensitive materials through atmospheric contamination. Here, we present an integrated, multi-purpose instrument dedicated to the optical and electrical characterization of devices based on 2D materials which is able to perform low frequency electrical measurements, scanning photocurrent mapping, and Raman, absorption, and PL spectroscopy in one single setup with full control over the polarization and wavelength of light. We characterize this apparatus by performing multiple measurements on graphene, transition metal dichalcogenides (TMDs), and Si. The performance and resolution of each individual measurement technique is found to be equivalent to that of commercially available instruments. Contrary to nowadays' commercial systems, a significant advantage of the developed instrument is that for the first time the integration of a wide

  13. Baker-Akhiezer functions and generalised Macdonald-Mehta integrals

    Science.gov (United States)

    Feigin, M. V.; Hallnäs, M. A.; Veselov, A. P.

    2013-05-01

    For the rational Baker-Akhiezer functions associated with special arrangements of hyperplanes with multiplicities we establish an integral identity, which may be viewed as a generalisation of the self-duality property of the usual Gaussian function with respect to the Fourier transformation. We show that the value of properly normalised Baker-Akhiezer function at the origin can be given by an integral of Macdonald-Mehta type and explicitly compute these integrals for all known Baker-Akhiezer arrangements. We use the Dotsenko-Fateev integrals to extend this calculation to all deformed root systems, related to the non-exceptional basic classical Lie superalgebras.

  14. Integration of the Density Gradient Model into a General Purpose Device Simulator

    Directory of Open Access Journals (Sweden)

    Andreas Wettstein

    2002-01-01

    Full Text Available A generalized Density Gradient model has been implemented into the device simulator Dessis [DESSIS 7.0 reference manual (2001. ISE Integrated Systems Engineering AG, Balgriststrasse 102, CH-8008 Zürich].We describe the multidimensional discretization scheme used and discuss our modifications to the standard Density Gradient model. The evaluation of the model shows good agreement to results obtained by the Schro¨dinger equation.

  15. Single integrated device for optical CDMA code processing in dual-code environment.

    Science.gov (United States)

    Huang, Yue-Kai; Glesk, Ivan; Greiner, Christoph M; Iazkov, Dmitri; Mossberg, Thomas W; Wang, Ting; Prucnal, Paul R

    2007-06-11

    We report on the design, fabrication and performance of a matching integrated optical CDMA encoder-decoder pair based on holographic Bragg reflector technology. Simultaneous encoding/decoding operation of two multiple wavelength-hopping time-spreading codes was successfully demonstrated and shown to support two error-free OCDMA links at OC-24. A double-pass scheme was employed in the devices to enable the use of longer code length.

  16. An integrated microfluidic device for rapid and high-sensitivity analysis of circulating tumor cells

    Science.gov (United States)

    Jiang, Jianing; Zhao, Hui; Shu, Weiliang; Tian, Jing; Huang, Yuqing; Song, Yongxin; Wang, Ruoyu; Li, Encheng; Slamon, Dennis; Hou, Dongmei; Du, Xiaohui; Zhang, Lichuan; Chen, Yan; Wang, Qi

    2017-01-01

    Recently there has been a more focus on the development of an efficient technique for detection of circulating tumor cells (CTCs), due to their significance in prognosis and therapy of metastatic cancer. However, it remains a challenge because of the low count of CTCs in the blood. Herein, a rapid and high-sensitivity approach for CTCs detection using an integrated microfluidic system, consisting of a deterministic lateral displacement (DLD) isolating structure, an automatic purifying device with CD45-labeled immunomagnetic beads and a capturing platform coated with rat-tail collagen was reported. We observed high capture rate of 90%, purity of about 50% and viability of more than 90% at the high throughput of 1 mL/min by capturing green fluorescent protein (GFP)-positive cells from blood. Further capturing of CTCs from metastatic cancers patients revealed a positive capture rate of 83.3%. Furthermore, our device was compared with CellSearch system via parallel analysis of 30 cancer patients, to find no significant difference between the capture efficiency of both methods. However, our device displayed advantage in terms of time, sample volume and cost for analysis. Thus, our integrated device with sterile environment and convenient use will be a promising platform for CTCs detection with potential clinical application. PMID:28198402

  17. Chemically Integrated Inorganic-Graphene Two-Dimensional Hybrid Materials for Flexible Energy Storage Devices.

    Science.gov (United States)

    Peng, Lele; Zhu, Yue; Li, Hongsen; Yu, Guihua

    2016-12-01

    State-of-the-art energy storage devices are capable of delivering reasonably high energy density (lithium ion batteries) or high power density (supercapacitors). There is an increasing need for these power sources with not only superior electrochemical performance, but also exceptional flexibility. Graphene has come on to the scene and advancements are being made in integration of various electrochemically active compounds onto graphene or its derivatives so as to utilize their flexibility. Many innovative synthesis techniques have led to novel graphene-based hybrid two-dimensional nanostructures. Here, the chemically integrated inorganic-graphene hybrid two-dimensional materials and their applications for energy storage devices are examined. First, the synthesis and characterization of different kinds of inorganic-graphene hybrid nanostructures are summarized, and then the most relevant applications of inorganic-graphene hybrid materials in flexible energy storage devices are reviewed. The general design rules of using graphene-based hybrid 2D materials for energy storage devices and their current limitations and future potential to advance energy storage technologies are also discussed.

  18. A heterogeneous III-V/silicon integration platform for on-chip quantum photonic circuits with single quantum dot devices

    CERN Document Server

    Davanco, Marcelo; Sapienza, Luca; Zhang, Chen-Zhao; Cardoso, Jose Vinicius De Miranda; Verma, Varun; Mirin, Richard; Nam, Sae Woo; Liu, Liu; Srinivasan, Kartik

    2016-01-01

    Photonic integration is an enabling technology for photonic quantum science, offering greater scalability, stability, and functionality than traditional bulk optics. Here, we describe a scalable, heterogeneous III-V/silicon integration platform to produce Si$_3$N$_4$ photonic circuits incorporating GaAs-based nanophotonic devices containing self-assembled InAs/GaAs quantum dots. We demonstrate pure singlephoton emission from individual quantum dots in GaAs waveguides and cavities - where strong control of spontaneous emission rate is observed - directly launched into Si$_3$N$_4$ waveguides with > 90 % efficiency through evanescent coupling. To date, InAs/GaAs quantum dots constitute the most promising solidstate triggered single-photon sources, offering bright, pure and indistinguishable emission that can be electrically and optically controlled. Si$_3$N$_4$ waveguides offer low-loss propagation, tailorable dispersion and high Kerr nonlinearities, desirable for linear and nonlinear optical signal processing d...

  19. An integral estimate of Bessel function and its application

    Institute of Scientific and Technical Information of China (English)

    DING Yong; LI Ran

    2008-01-01

    In this paper the authors give a new integral estimate of the Bessel function, which parameterized Marcinkiewicz integral μΩρ with variable kernels is of type (2, 2), where the kernel function Ω does not have any smoothness on the unit sphere in Rn.

  20. Some integrals involving generalized k-Struve functions

    Directory of Open Access Journals (Sweden)

    Kottakkaran Sooppy Nisar

    2017-03-01

    Full Text Available The close form of some integrals involving recently developed generalized k-Struve functions is obtained. The outcome of these integrations is expressed in terms of generalized Wright functions. Several special cases are deduced which lead to some known results.

  1. Selective in situ functionalization of biosensors on LOC devices using laminar co-flow.

    Science.gov (United States)

    Parra-Cabrera, C; Sporer, C; Rodriguez-Villareal, I; Rodriguez-Trujillo, R; Homs-Corbera, A; Samitier, J

    2012-10-21

    Many applications involving lab-on-a-chip (LOC) devices are prevented from entering the market because of difficulties to achieve mass production and impart suitable properties allowing long-term storage. To integrate biosensors on these microfluidic chips, one of the main restrictions is the fabrication and stability of the molecular modifications that must be performed on the surfaces of the sensors for a given application. The complexity of the problem increases exponentially when the LOC integrates several of these sensors. Here we present a system based on laminar co-flow to perform an on-chip selective surface bio-functionalization of LOC-integrated sensors. This method has the advantage that the surface modification protocols are performed in situ before analyte detection. This approach reduces the burdens during LOC fabrication, keeping the required reagents stored outside of the detection structure in suitable wet conditions. The proof of concept is demonstrated through an optical characterization followed by electronic detection based on a novel differential impedance measurement setup. The system can be easily scaled to incorporate several sensors with distinct biosensing targets in a single chip.

  2. Integrated printed circuit board device for cell lysis and nucleic acid extraction.

    Science.gov (United States)

    Marshall, Lewis A; Wu, Liang Li; Babikian, Sarkis; Bachman, Mark; Santiago, Juan G

    2012-11-01

    Preparation of raw, untreated biological samples remains a major challenge in microfluidics. We present a novel microfluidic device based on the integration of printed circuit boards and an isotachophoresis assay for sample preparation of nucleic acids from biological samples. The device has integrated resistive heaters and temperature sensors as well as a 70 μm × 300 μm × 3.7 cm microfluidic channel connecting two 15 μL reservoirs. We demonstrated this device by extracting pathogenic nucleic acids from 1 μL dispensed volume of whole blood spiked with Plasmodium falciparum. We dispensed whole blood directly onto an on-chip reservoir, and the system's integrated heaters simultaneously lysed and mixed the sample. We used isotachophoresis to extract the nucleic acids into a secondary buffer via isotachophoresis. We analyzed the convective mixing action with micro particle image velocimetry (micro-PIV) and verified the purity and amount of extracted nucleic acids using off-chip quantitative polymerase chain reaction (PCR). We achieved a clinically relevant limit of detection of 500 parasites per microliter. The system has no moving parts, and the process is potentially compatible with a wide range of on-chip hybridization or amplification assays.

  3. Libcint: An efficient general integral library for Gaussian basis functions

    CERN Document Server

    Sun, Qiming

    2014-01-01

    An efficient integral library Libcint was designed to automatically implement general integrals for Gaussian-type scalar and spinor basis functions. The library can handle arbitrary integral expressions on top of $\\mathbf{p}$, $\\mathbf{r}$ and $\\sigma$ operators with one-electron overlap and nuclear attraction, two-electron Coulomb and Gaunt operators. Using a symbolic algebra tool, new integrals are derived and translated to C code programmatically. The generated integrals can be used in various types of molecular properties. In the present work, we computed the analytical gradients and NMR shielding constants at both non-relativistic and four-component relativistic Hartree-Fock level to demonstrate the capability of the integral library. Due to the use of kinetically balanced basis and gauge including atomic orbitals, the relativistic analytical gradients and shielding constants requires the integral library to handle the fifth-order electron repulsion integral derivatives. The generality of the integral li...

  4. Understanding integrated care: a comprehensive conceptual framework based on the integrative functions of primary care

    Directory of Open Access Journals (Sweden)

    Pim P. Valentijn

    2013-03-01

    Full Text Available Introduction: Primary care has a central role in integrating care within a health system. However, conceptual ambiguity regarding integrated care hampers a systematic understanding. This paper proposes a conceptual framework that combines the concepts of primary care and integrated care, in order to understand the complexity of integrated care.Methods:  The search method involved a combination of electronic database searches, hand searches of reference lists (snowball method and contacting researchers in the field. The process of synthesizing the literature was iterative, to relate the concepts of primary care and integrated care. First, we identified the general principles of primary care and integrated care. Second, we connected the dimensions of integrated care and the principles of primary care. Finally, to improve content validity we held several meetings with researchers in the field to develop and refine our conceptual framework.Results: The conceptual framework combines the functions of primary care with the dimensions of integrated care. Person-focused and population-based care serve as guiding principles for achieving integration across the care continuum. Integration plays complementary roles on the micro (clinical integration, meso (professional and organisational integration and macro (system integration level. Functional and normative integration ensure connectivity between the levels.Discussion:  The presented conceptual framework is a first step to achieve a better understanding of the inter-relationships among the dimensions of integrated care from a primary care perspective.

  5. The space of Henstock integrable functions of two variables

    Directory of Open Access Journals (Sweden)

    Krzysztof Ostaszewski

    1988-01-01

    Full Text Available We consider the space of Henstock integrable functions of two variables. Equipped with the Alexiewicz norm the space is proved to be barrelled. We give a partial description of its dual. We show by an example that the dual can't be described in a manner analogous to the one-dimensional case, since in two variables there exist functions whose distributional partials are measures and which are not multipliers for Henstock integrable functions.

  6. Object-oriented models of functionally integrated computer systems

    OpenAIRE

    Kaasbøll, Jens

    1994-01-01

    Functional integration is the compatibility between the structure, culture and competence of an organization and its computer systems, specifically the availability of data and functionality and the consistency of user interfaces. Many people use more than one computer program in their work, and they experience problems relating to functional integration. Various solutions can be considered for different tasks and technology; e.g. to design a common userinterface shell for several application...

  7. Integrals of Lagrange functions and sum rules

    Energy Technology Data Exchange (ETDEWEB)

    Baye, Daniel, E-mail: dbaye@ulb.ac.be [Physique Quantique, CP 165/82, Universite Libre de Bruxelles, B 1050 Bruxelles (Belgium); Physique Nucleaire Theorique et Physique Mathematique, CP 229, Universite Libre de Bruxelles, B 1050 Bruxelles (Belgium)

    2011-09-30

    Exact values are derived for some matrix elements of Lagrange functions, i.e. orthonormal cardinal functions, constructed from orthogonal polynomials. They are obtained with exact Gauss quadratures supplemented by corrections. In the particular case of Lagrange-Laguerre and shifted Lagrange-Jacobi functions, sum rules provide exact values for matrix elements of 1/x and 1/x{sup 2} as well as for the kinetic energy. From these expressions, new sum rules involving Laguerre and shifted Jacobi zeros and weights are derived. (paper)

  8. An electrically actuated imperfect microbeam: Dynamical integrity for interpreting and predicting the device response

    KAUST Repository

    Ruzziconi, Laura

    2013-02-20

    In this study we deal with a microelectromechanical system (MEMS) and develop a dynamical integrity analysis to interpret and predict the experimental response. The device consists of a clamped-clamped polysilicon microbeam, which is electrostatically and electrodynamically actuated. It has non-negligible imperfections, which are a typical consequence of the microfabrication process. A single-mode reduced-order model is derived and extensive numerical simulations are performed in a neighborhood of the first symmetric natural frequency, via frequency response diagrams and behavior chart. The typical softening behavior is observed and the overall scenario is explored, when both the frequency and the electrodynamic voltage are varied. We show that simulations based on direct numerical integration of the equation of motion in time yield satisfactory agreement with the experimental data. Nevertheless, these theoretical predictions are not completely fulfilled in some aspects. In particular, the range of existence of each attractor is smaller in practice than in the simulations. This is because these theoretical curves represent the ideal limit case where disturbances are absent, which never occurs under realistic conditions. A reliable prediction of the actual (and not only theoretical) range of existence of each attractor is essential in applications. To overcome this discrepancy and extend the results to the practical case where disturbances exist, a dynamical integrity analysis is developed. After introducing dynamical integrity concepts, integrity profiles and integrity charts are drawn. They are able to describe if each attractor is robust enough to tolerate the disturbances. Moreover, they detect the parameter range where each branch can be reliably observed in practice and where, instead, becomes vulnerable, i.e. they provide valuable information to operate the device in safe conditions according to the desired outcome and depending on the expected disturbances

  9. Fabricating process of hollow out-of-plane Ni microneedle arrays and properties of the integrated microfluidic device

    Science.gov (United States)

    Zhu, Jun; Cao, Ying; Wang, Hong; Li, Yigui; Chen, Xiang; Chen, Di

    2013-07-01

    Although microfluidic devices that integrate microfluidic chips with hollow out-of-plane microneedle arrays have many advantages in transdermal drug delivery applications, difficulties exist in their fabrication due to the special three-dimensional structures of hollow out-of-plane microneedles. A new, cost-effective process for the fabrication of a hollow out-of-plane Ni microneedle array is presented. The integration of PDMS microchips with the Ni hollow microneedle array and the properties of microfluidic devices are also presented. The integrated microfluidic devices provide a new approach for transdermal drug delivery.

  10. PDR/INS/WiFi Integration Based on Handheld Devices for Indoor Pedestrian Navigation

    Directory of Open Access Journals (Sweden)

    Yuan Zhuang

    2015-06-01

    Full Text Available Providing an accurate and practical navigation solution anywhere with portable devices, such as smartphones, is still a challenge, especially in environments where global navigation satellite systems (GNSS signals are not available or are degraded. This paper proposes a new algorithm that integrates inertial navigation system (INS and pedestrian dead reckoning (PDR to combine the advantages of both mechanizations for micro-electro-mechanical systems (MEMS sensors in pedestrian navigation applications. In this PDR/INS integration algorithm, a pseudo-velocity-vector, which is composed of the PDR-derived forward speed and zero lateral and vertical speeds from non-holonomic constraints (NHC, works as an update for the INS to limit the velocity errors. To further limit the drift of MEMS inertial sensors, trilateration-based WiFi positions with small variances are also selected as updates for the PDR/INS integrated system. The experiments illustrate that positioning error is decreased by 60%–75% by using the proposed PDR/INS integrated MEMS solution when compared with PDR. The positioning error is further decreased by 15%–55% if the proposed PDR/INS/WiFi integrated solution is implemented. The average accuracy of the proposed PDR/INS/WiFi integration algorithm achieves 4.5 m in indoor environments.

  11. Calculation and Modeling of EMI from Integrated Circuits inside High-Speed Network Devices

    Directory of Open Access Journals (Sweden)

    S. K. Goudos

    2006-12-01

    Full Text Available This work presents a numerical approach to the modeling of Electromagnetic Interference (EMI from the emissions of ICs and PCBs inside rectangular metallic enclosures of network devices. The ICs are modeled as small magnetic and electric dipoles. Their interaction with the enclosures is studied with the dyadic Green's functions. Several calculation examples of surface current density on the metallic walls are given due to dipoles parallel to all directions. A Probabilistic Model is created from magnetic probe measurements in various types of router devices. Monte Carlo simulation is applied in order to perform a worst-case analysis. The applications of the above approach in PCB design are discussed.

  12. Correlation Functions for Lattice Integrable Models

    Directory of Open Access Journals (Sweden)

    F. Smirnov

    2008-01-01

    Full Text Available In this lectures I consider the problem of calculating the correlation functions for XXZ spin chain. First, I explain in details the free fermion case. Then I show that for generic coupling constant the fermionic operators acting on the space of quasi-local fields can be introduced. In the basis generated by these fermionic operators the correlation functions are given by determinants as in the free fermion case. 

  13. Functional Integrity of Some Class of Multi-Agent Systems

    Directory of Open Access Journals (Sweden)

    Krzysztof Cetnarowicz

    1999-01-01

    Full Text Available Multi-agent systems have many advantages and give numerous new possibilities in creation of information systems. However many problems related to functioning of the systems are still unsolved. Functional integrity of multi-agents systems belongs to such problems. Functional integrity of multi-agent systems may be defined in general as preservation of basic functions of the system during its functioning. Functional integrity may be analyzed from the point of view of different functions of the system (the functions that should be preserved and also from the point of view of various factors that may influence the loss or preservation of functional integrity of the system. The paper deals with examination of functional integrity of multi-agent system depending upon number of agents (global and of particular types. During system work, agents generate agents of the same or different type that depend on their possibilities and system needs. The process performed without use of appropriate control mechanisms may lead to excessive (blocking of the system or too little number of agents and even lack of agents (disappearance of the functions of a system that are performed by agents of a certain type. A proposal of functional integrity phenomenon analysis of multi-agent systems that is related to the number of agents in their population and a proposal of mechanisms that enable maintenance of functional integrity, in particular a concept of the so-called ``free agents'' have been presented in the paper. Consideration has been carried out on the basis of simulation examination of some class of multi-agent systems. Results of simulation of proposed solutions have been included in the work.

  14. System-on-fluidics immunoassay device integrating wireless radio-frequency-identification sensor chips.

    Science.gov (United States)

    Yazawa, Yoshiaki; Oonishi, Tadashi; Watanabe, Kazuki; Shiratori, Akiko; Funaoka, Sohei; Fukushima, Masao

    2014-09-01

    A simple and sensitive point-of-care-test (POCT) device for chemiluminescence (CL) immunoassay was devised and tested. The device consists of a plastic flow-channel reactor and two wireless-communication sensor chips, namely, a photo-sensor chip and a temperature-sensor chip. In the flow-channel reactor, a target antigen is captured by an antibody immobilized on the inner wall of the flow-channel and detected with enzyme labeled antibody by using CL substrate. The CL signal corresponding to the amount of antigen is measured by a newly developed radio-frequency-identification (RFID) sensor, which enables batteryless operation and wireless data communication with an external reader. As for the POCT device, its usage environment, especially temperature, varies for each measurement. Hence, temperature compensation is a key issue in regard to eliminating dark-signal fluctuation, which is a major factor in deterioration of the precision of the POCT device. A two-stage temperature-compensation scheme was adopted. As for the first stage, the signals of two photodiodes, one with an open window and one with a sealed window, integrated on the photo-sensor chip are differentiated to delete the dark signal. As for the second stage, the differentiated signal fluctuation caused by a temperature variation is compensated by using the other sensor chip (equipped with a temperature sensor). The dark-level fluctuation caused by temperature was reduced from 0.24 to 0.02 pA/°C. The POCT device was evaluated as a CL immunoassay of thyroid-stimulating hormone (TSH). The flow rate of the CL reagent in the flow channel was optimized. As a result, the detection limit of the POCT device was 0.08 ng/ml (i.e., 0.4 μIU/ml). Copyright © 2014 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  15. Optomechanical measurement of photon spin angular momentum and optical torque in integrated photonic devices.

    Science.gov (United States)

    He, Li; Li, Huan; Li, Mo

    2016-09-01

    Photons carry linear momentum and spin angular momentum when circularly or elliptically polarized. During light-matter interaction, transfer of linear momentum leads to optical forces, whereas transfer of angular momentum induces optical torque. Optical forces including radiation pressure and gradient forces have long been used in optical tweezers and laser cooling. In nanophotonic devices, optical forces can be significantly enhanced, leading to unprecedented optomechanical effects in both classical and quantum regimes. In contrast, to date, the angular momentum of light and the optical torque effect have only been used in optical tweezers but remain unexplored in integrated photonics. We demonstrate the measurement of the spin angular momentum of photons propagating in a birefringent waveguide and the use of optical torque to actuate rotational motion of an optomechanical device. We show that the sign and magnitude of the optical torque are determined by the photon polarization states that are synthesized on the chip. Our study reveals the mechanical effect of photon's polarization degree of freedom and demonstrates its control in integrated photonic devices. Exploiting optical torque and optomechanical interaction with photon angular momentum can lead to torsional cavity optomechanics and optomechanical photon spin-orbit coupling, as well as applications such as optomechanical gyroscopes and torsional magnetometry.

  16. Optical fiber loops and helices: tools for integrated photonic device characterization and microfluidic trapping

    Science.gov (United States)

    Ren, Yundong; Zhang, Rui; Ti, Chaoyang; Liu, Yuxiang

    2016-09-01

    Tapered optical fibers can deliver guided light into and carry light out of micro/nanoscale systems with low loss and high spatial resolution, which makes them ideal tools in integrated photonics and microfluidics. Special geometries of tapered fibers are desired for probing monolithic devices in plane as well as optical manipulation of micro particles in fluids. However, for many specially shaped tapered fibers, it remains a challenge to fabricate them in a straightforward, controllable, and repeatable way. In this work, we fabricated and characterized two special geometries of tapered optical fibers, namely fiber loops and helices, that could be switched between one and the other. The fiber loops in this work are distinct from previous ones in terms of their superior mechanical stability and high optical quality factors in air, thanks to a post-annealing process. We experimentally measured an intrinsic optical quality factor of 32,500 and a finesse of 137 from a fiber loop. A fiber helix was used to characterize a monolithic cavity optomechanical device. Moreover, a microfluidic "roller coaster" was demonstrated, where microscale particles in water were optically trapped and transported by a fiber helix. Tapered fiber loops and helices can find various applications ranging from on-the-fly characterization of integrated photonic devices to particle manipulation and sorting in microfluidics.

  17. Scattering detection using a photonic-microfluidic integrated device with on-chip collection capabilities.

    Science.gov (United States)

    Watts, Benjamin R; Zhang, Zhiyi; Xu, Chang Qing; Cao, Xudong; Lin, Min

    2014-02-01

    SU-8-based photonic-microfluidic integrated devices with on-chip beam shaping and collection capabilities were demonstrated in a scattering detection and counting application. Through the proper deployment of the tailored beam geometries via the on-chip excitation optics, excellent CV values were measured for 1, 2, and 5 μm blank beads, 16.4, 11.0, and 12.5%, respectively, coupled with a simple free-space optical detection scheme. The performance of these devices was found dependent on the combination of on-chip, lens-shaped beam geometry and bead size. While very low CVs were obtained when the combination was ideal, a nonideal combination could still result in acceptable CVs for flow cytometry; the reliability was confirmed via devices being able to resolve separate populations of 2.0 and 5.0 μm beads from their mixture with low CV values of 15.9 and 18.5%, respectively. On-chip collection using integrated on-chip optical waveguides was shown to be very reliable in comparison with a free-space collection scheme, yielding a coincident rate of 94.2%. A CV as low as 19.2% was obtained from the on-chip excitation and collection of 5 μm beads when the on-chip lens-shaped beam had a 6.0-μm beam waist.

  18. An integrated microfluidic device in marine microalgae culture for toxicity screening application.

    Science.gov (United States)

    Zheng, Guoxia; Wang, Yunhua; Wang, Zumin; Zhong, Weiliang; Wang, Hu; Li, Yajie

    2013-07-15

    Algal assay using marine microalgae has emerged as an important method to evaluate the toxicity of chemicals, which is currently undertaken using conventional culture and additional detection of physiological cellular endpoints. While effective, this approach can be labor-intensive and thus could benefit from a more streamlined, integrated approach. Microfluidics offers a way to accomplish this goal. Here, we demonstrate a microfluidic device which consists of a concentration gradient generator (CGG), diffusible culturing module and power-free valve system. It allows the processes of chemical liquid dilution and diffusion, micro-scale microalgal culture (in batch or chemostatic conditions), cell stimulation and on-lined screening to be integrated into a single device. Using the device, marine microalgae were successfully cultured and stressed on-chip. The simple assay provides multi-biological response measurements of cell division rate, autofluorescence and esterase activity. This work showed promising in developing a microfluidic platform for toxicity screening based on marine microalgal culture. Copyright © 2013 Elsevier Ltd. All rights reserved.

  19. Study of radiation-induced leakage current between adjacent devices in a CMOS integrated circuit

    Institute of Scientific and Technical Information of China (English)

    Ding Lili; Guo Hongxia; Chen Wei; Fan Ruyu

    2012-01-01

    Radiation-induced inter-device leakage is studied using an analytical model and TCAD simulation.There were some different opinions in understanding the process of defect build-up in trench oxide and parasitic leakage path turning on from earlier studies.To reanalyze this problem and make it beyond argument,every possible variable is considered using theoretical analysis,not just the change of electric field or oxide thickness independently.Among all possible inter-device leakage paths,parasitic structures with N-well as both drain and source are comparatively more sensitive to the total dose effect when a voltage discrepancy exists between the drain and source region.Since N-well regions are commonly connected to the same power supply,these kinds of structures will not be a problem in a real CMOS integrated circuit.Generally speaking,conduction paths of inter-device leakage existing in a real integrated circuit and under real electrical circumstances are not very sensitive to the total ionizing dose effect.

  20. Enhancing the quality of life and preserving independence for target needs populations through integration of assistive technology devices.

    Science.gov (United States)

    Muncert, Eric S; Bickford, Steven A; Guzic, Brenda L; Demuth, Barbara R; Bapat, Ashok R; Roberts, Jay B

    2011-01-01

    Telehealth Test Bed-Quality of Life Studies is a research study investigating, testing, evaluating, and demonstrating technologies that have the potential to improve the quality of life for target populations, such as warriors in transition, veterans, individuals with physical and mental disabilities, and adults age 65 and older, who may require assistive technology devices to aid in maintaining or improving their quality of life. Thousands of soldiers who fought in Operation Iraqi Freedom and Operation Enduring Freedom have been wounded in action or have sustained injuries from noncombat accidents. Many of these injuries affecting military populations, as well as the general public, have resulted in amputations, traumatic brain injuries, and other physical or mental impairments. Depending on the severity of the injury, assistive technologies may be temporarily needed, or as a long-term solution, to regain and maintain normal daily functions. Saint Francis University's Center of Excellence for Remote and Medically Under-Served Areas developed an evaluation matrix comparing assistive technologies to identify devices that will improve or maintain the quality of life for these target populations. The integration of telehealth and telerehabilitation applications into patients' daily lives was examined to help improve home rehabilitation via access to healthcare specialties in rural and medically underserved settings. Researchers identified and tested assistive technology devices to be included in a self-sufficient living environment. The continuation of this research involves recruiting individuals to test and evaluate the functions of these commercially available technologies and to complete data collection surveys and questionnaires. The results are useful in selecting devices that will enhance or extend the quality of life of the target populations.

  1. Generalized fractional integration of the \\overline{H}-function

    Directory of Open Access Journals (Sweden)

    Praveen Agarwal

    2012-11-01

    Full Text Available A significantly large number of earlier works on the subject of fractional calculus give interesting account of the theory and applications of fractional calculus operators in many different areas of mathematical analysis (such as ordinary and partial differential equations, integral equations, special functions, summation of series, et cetera. In the present paper, we study and develop the generalized fractional integral operators given by Saigo. First, we establish two Theorems that give the images of the product of H-function and a general class of polynomials inSaigo operators. On account of the general nature of the Saigo operators, H-function and a general class of polynomials a large number of new and known Images involving Riemann-Liouville and Erdélyi-Kober fractional integral operators and several special functions notably generalized Wright hypergeometric function, generalized Wright-Bessel function, the polylogarithm and Mittag-Leffler functions follow as special cases of our main findings.

  2. Monolayer-functionalized microfluidics devices for optical sensing of acidity

    NARCIS (Netherlands)

    Mela, P.; Onclin, S.; Goedbloed, M.H.; Levi, S.; Garcia-Parajo, M.F.; Hulst, van N.F.; Ravoo, B.J.; Reinhoudt, D.N.; Berg, van den A.

    2005-01-01

    This paper describes the integration of opto-chemosensors in microfluidics networks. Our technique exploits the internal surface of the network as a platform to build a sensing system by coating the surface with a self-assembled monolayer and subsequently binding a fluorescent sensing molecule to th

  3. High-throughput microfluidic device for single cell analysis using multiple integrated soft lithographic pumps.

    Science.gov (United States)

    Patabadige, Damith E W; Mickleburgh, Tom; Ferris, Lorin; Brummer, Gage; Culbertson, Anne H; Culbertson, Christopher T

    2016-05-01

    The ability to accurately control fluid transport in microfluidic devices is key for developing high-throughput methods for single cell analysis. Making small, reproducible changes to flow rates, however, to optimize lysis and injection using pumps external to the microfluidic device are challenging and time-consuming. To improve the throughput and increase the number of cells analyzed, we have integrated previously reported micropumps into a microfluidic device that can increase the cell analysis rate to ∼1000 cells/h and operate for over an hour continuously. In order to increase the flow rates sufficiently to handle cells at a higher throughput, three sets of pumps were multiplexed. These pumps are simple, low-cost, durable, easy to fabricate, and biocompatible. They provide precise control of the flow rate up to 9.2 nL/s. These devices were used to automatically transport, lyse, and electrophoretically separate T-Lymphocyte cells loaded with Oregon green and 6-carboxyfluorescein. Peak overlap statistics predicted the number of fully resolved single-cell electropherograms seen. In addition, there was no change in the average fluorescent dye peak areas indicating that the cells remained intact and the dyes did not leak out of the cells over the 1 h analysis time. The cell lysate peak area distribution followed that expected of an asynchronous steady-state population of immortalized cells.

  4. Organic nanofibers integrated by transfer technique in field-effect transistor devices

    Directory of Open Access Journals (Sweden)

    Tavares Luciana

    2011-01-01

    Full Text Available Abstract The electrical properties of self-assembled organic crystalline nanofibers are studied by integrating these on field-effect transistor platforms using both top and bottom contact configurations. In the staggered geometries, where the nanofibers are sandwiched between the gate and the source-drain electrodes, a better electrical conduction is observed when compared to the coplanar geometry where the nanofibers are placed over the gate and the source-drain electrodes. Qualitatively different output characteristics were observed for top and bottom contact devices reflecting the significantly different contact resistances. Bottom contact devices are dominated by contact effects, while the top contact device characteristics are determined by the nanofiber bulk properties. It is found that the contact resistance is lower for crystalline nanofibers when compared to amorphous thin films. These results shed light on the charge injection and transport properties for such organic nanostructures and thus constitute a significant step forward toward a nanofiber-based light-emitting device.

  5. Transcap: A new integrated hybrid supercapacitor and electrolyte-gated transistor device (Presentation Recording)

    Science.gov (United States)

    Santato, Clara

    2015-10-01

    The boom in multifunctional, flexible, and portable electronics and the increasing need of low-energy cost and autonomy for applications ranging from wireless sensor networks for smart environments to biomedical applications are triggering research efforts towards the development of self-powered sustainable electronic devices. Within this context, the coupling of electronic devices (e.g. sensors, transistors) with small size energy storage systems (e.g. micro-batteries or micro-supercapacitors) is actively pursued. Micro-electrochemical supercapacitors are attracting much attention in electronics for their capability of delivering short power pulses with high stability over repeated charge/discharge cycling. For their high specific pseudocapacitance, electronically conducting polymers are well known as positive materials for hybrid supercapacitors featuring high surface carbon negative electrodes. The processability of both polymer and carbon is of great relevance for the development of flexible miniaturised devices. Electronically conducting polymers are even well known to feature an electronic conductivity that depends on their oxidation (p-doped state) and that it is modulated by the polymer potential. This property and the related pseudocapacitive response make polymer very attracting channel materials for electrolyte-gated (EG) transistors. Here, we propose a novel concept of "Trans-capacitor", an integrated device that exhibits the storage properties of a polymer/carbon hybrid supercapacitor and the low-voltage operation of an electrolyte-gated transistor.

  6. III-V/Ge MOS device technologies for low power integrated systems

    Science.gov (United States)

    Takagi, S.; Noguchi, M.; Kim, M.; Kim, S.-H.; Chang, C.-Y.; Yokoyama, M.; Nishi, K.; Zhang, R.; Ke, M.; Takenaka, M.

    2016-11-01

    CMOS utilizing high mobility III-V/Ge channels on Si substrates is expected to be one of the promising devices for high performance and low power integrated systems in the future technology nodes, because of the enhanced carrier transport properties. In addition, Tunneling-FETs (TFETs) using Ge/III-V materials are regarded as one of the most important steep slope devices for the ultra-low power applications. In this paper, we address the device and process technologies of Ge/III-V MOSFETs and TFETs on the Si CMOS platform. The channel formation, source/drain (S/D) formation and gate stack engineering are introduced for satisfying the device requirements. The plasma post oxidation to form GeOx interfacial layers is a key gate stack technology for Ge CMOS. Also, direct wafer bonding of ultrathin body quantum well III-V-OI channels, combined with Tri-gate structures, realizes high performance III-V n-MOSFETs on Si. We also demonstrate planar-type InGaAs and Ge/strained SOI TFETs. The defect-less p+-n source junction formation with steep impurity profiles is a key for high performance TFET operation.

  7. An integrated hybrid microfluidic device for oviposition-based chemical screening of adult Drosophila melanogaster.

    Science.gov (United States)

    Leung, Jacob C K; Hilliker, Arthur J; Rezai, Pouya

    2016-02-21

    Chemical screening using Drosophila melanogaster (the fruit fly) is vital in drug discovery, agricultural, and toxicological applications. Oviposition (egg laying) on chemically-doped agar plates is an important read-out metric used to quantitatively assess the biological fitness and behavioral responses of Drosophila. Current oviposition-based chemical screening studies are inaccurate, labor-intensive, time-consuming, and inflexible due to the manual chemical doping of agar. In this paper, we have developed a novel hybrid agar-polydimethylsiloxane (PDMS) microfluidic device for single- and multi-concentration chemical dosing and on-chip oviposition screening of free-flying adult stage Drosophila. To achieve this, we have devised a novel technique to integrate agar with PDMS channels using ice as a sacrificial layer. Subsequently, we have conducted single-chemical toxicity and multiple choice chemical preference assays on adult Drosophila melanogaster using zinc and acetic acid at various concentrations. Our device has enabled us to 1) demonstrate that Drosophila is capable of sensing the concentration of different chemicals on a PDMS-agar microfluidic device, which plays significant roles in determining oviposition site selection and 2) investigate whether oviposition preference differs between single- and multi-concentration chemical environments. This device may be used to study fundamental and applied biological questions in Drosophila and other egg laying insects. It can also be extended in design to develop sophisticated and dynamic chemical dosing and high-throughput screening platforms in the future that are not easily achievable with the existing oviposition screening techniques.

  8. Microfluidic application-specific integrated device for monitoring direct cell-cell communication via gap junctions between individual cell pairs

    Science.gov (United States)

    Lee, Philip J.; Hung, Paul J.; Shaw, Robin; Jan, Lily; Lee, Luke P.

    2005-05-01

    Direct cell-cell communication between adjacent cells is vital for the development and regulation of functional tissues. However, current biological techniques are difficult to scale up for high-throughput screening of cell-cell communication in an array format. In order to provide an effective biophysical tool for the analysis of molecular mechanisms of gap junctions that underlie intercellular communication, we have developed a microfluidic device for selective trapping of cell-pairs and simultaneous optical characterizations. Two different cell populations can be brought into membrane contact using an array of trapping channels with a 2μm by 2μm cross section. Device operation was verified by observation of dye transfer between mouse fibroblasts (NIH3T3) placed in membrane contact. Integration with lab-on-a-chip technologies offers promising applications for cell-based analytical tools such as drug screening, clinical diagnostics, and soft-state biophysical devices for the study of gap junction protein channels in cellular communications. Understanding electrical transport mechanisms via gap junctions in soft membranes will impact quantitative biomedical sciences as well as clinical applications.

  9. Functional carbon nitride materials — design strategies for electrochemical devices

    Science.gov (United States)

    Kessler, Fabian K.; Zheng, Yun; Schwarz, Dana; Merschjann, Christoph; Schnick, Wolfgang; Wang, Xinchen; Bojdys, Michael J.

    2017-06-01

    In the past decade, research in the field of artificial photosynthesis has shifted from simple, inorganic semiconductors to more abundant, polymeric materials. For example, polymeric carbon nitrides have emerged as promising materials for metal-free semiconductors and metal-free photocatalysts. Polymeric carbon nitride (melon) and related carbon nitride materials are desirable alternatives to industrially used catalysts because they are easily synthesized from abundant and inexpensive starting materials. Furthermore, these materials are chemically benign because they do not contain heavy metal ions, thereby facilitating handling and disposal. In this Review, we discuss the building blocks of carbon nitride materials and examine how strategies in synthesis, templating and post-processing translate from the molecular level to macroscopic properties, such as optical and electronic bandgap. Applications of carbon nitride materials in bulk heterojunctions, laser-patterned memory devices and energy storage devices indicate that photocatalytic overall water splitting on an industrial scale may be realized in the near future and reveal a new avenue of 'post-silicon electronics'.

  10. Update on the Design and Development of a TEG Cogenerator Device Integrated into Self-Standing Gas Heaters

    Science.gov (United States)

    Codecasa, Matteo Paolo; Fanciulli, Carlo; Gaddi, Roberto; Gomez-Paz, Francisco; Passaretti, Francesca

    2013-07-01

    Heating by gas combustion is widespread in residential and industrial environments, through the use of different types of systems and plants. A relevant case is that of gas stoves, where the heat-radiating unit operates autonomously with local gas feeding. A thermoelectric generator (TEG) can be integrated within this type of autonomous gas heater, for local production of electric power, so that devices requiring electric power can be added, where desired, without the need for any connection to the electrical grid. This approach can also lead to easier installation and operation, and eventually increases the overall efficiency. Following the development plan presented in a previous report, a new prototype of an autonomous gas heater for outdoor use has been implemented through the integration of an improved TEG device with a simple and robust design, which can be easily operated by the end-user. A small amount of heat is withdrawn and converted into electricity by the TEG, providing self-sustaining operation and, moreover, powering additional functions such as high-efficiency light-emitting diode lighting.

  11. Design of waveguide-integrated graphene devices for photonic gas sensing

    Science.gov (United States)

    Cheng, Zhenzhou; Goda, Keisuke

    2016-12-01

    We present waveguide-integrated graphene devices for photonic gas sensing. In a gas environment, graphene’s conductivity is changed by adsorbed gas molecules which serve as charge-carrier donors or acceptors. To accurately probe gas-induced variations in the graphene’s conductivity, we optimize the graphene’s Fermi level and spectral region. Then, we propose graphene-on-silicon and graphene-on-germanium suspended membrane slot waveguides in which propagating light in the waveguide has a strong interaction with the top graphene layer. The gas concentration can be calculated by measuring the spectrum of the optical reflection from the waveguide Bragg grating. The maximum sensitivity of the waveguide-integrated gas sensor can reach one part per million for sensing gaseous nitrogen dioxide. Its sensitivity is about 20 times higher than that of the graphene-covered microfiber sensor and is comparable with that of a graphene plasmonic sensor. The fabrication of the proposed graphene device is CMOS compatible. Our results pave a way for chip-integrated sensitive photonic gas sensors.

  12. Thermal Integration of a Liquid Acquisition Device into a Cryogenic Feed System

    Science.gov (United States)

    Hastings, L. J.; Bolshinskiy, L. G.; Schunk, R. G.; Martin, A. K.; Eskridge, R. H.; Frenkel, A.; Grayson, G.; Pendleton, M. L.

    2011-01-01

    Primary objectives of this effort were to define the following: (1) Approaches for quantification of the accumulation of thermal energy within a capillary screen liquid acquisition device (LAD) for a lunar lander upper stage during periods of up to 210 days on the lunar surface, (2) techniques for mitigating heat entrapment, and (3) perform initial testing, data evaluation. The technical effort was divided into the following categories: (1) Detailed thermal modeling of the LAD/feed system interactions using both COMSOL computational fluid device and standard codes, (2) FLOW-3D modeling of bulk liquid to provide interfacing conditions for the LAD thermal modeling, (3) condensation conditioning of capillary screens to stabilize surface tension retention capability, and (4) subscale testing of an integrated LAD/feed system. Substantial progress was achieved in the following technical areas: (1) Thermal modeling and experimental approaches for evaluating integrated cryogen LAD/feed systems, at both the system and component levels, (2) reduced gravity pressure control analyses, (3) analytical modeling and testing for capillary screen conditioning using condensation and wicking, and (4) development of rapid turnaround testing techniques for evaluating LAD/feed system thermal and fluid integration. A comprehensive effort, participants included a diverse cross section of representatives from academia, contractors, and multiple Marshall Space Flight Center organizations.

  13. P-type InGaAsP coolers for integrated optic devices

    Science.gov (United States)

    Vashaee, Daryoosh; LaBounty, Christopher J.; Fang, Xiaofeng; Zeng, Gehong; Abraham, Patrick; Bowers, John E.; Shakouri, Ali

    2001-05-01

    Single stage thin film coolers based on thermoelectric and thermionic cooling in p-type InGaAsP superlattice structures have been fabricated. Devices with different sizes and at various ambient temperatures have been characterized. Experimental results showed 0.5 degree centigrade cooling below the ambient temperature at 25C. This cooling over 1 4mu2m thick superlattice barrier corresponds to cooling power densities on the order of 200 W/cm2. The device cools by a factor of two better at higher temperatures (70C). This is due to the reduction of the superlattice thermal conductivity and the broadening of the electronic distribution function at higher temperatures. 150x150 micrometers 2 devices provide largest cooling at room temperature while the optimum device size shrinks as the temperature increases. Simulations results that take into account finite thermal resistance of the InP substrate, the effect of the contact resistance, heat generation in the wire-bonds and metallic pads on top of the device predict accurately the optimum cooling of these micro refrigerators. By eliminating the major parasitic sources of heating (Joule heating in the substrate, heat conduction through the side contact and reducing the contact resistance to 5x7-7 ohm-cm2) simulations show that, ultimately, one can achieve 15 degree(s)C cooling (10's of kW/cm2 cooling power) with single stage p-InGaAsP thin film coolers.

  14. Functionality of road safety devices – identification and analysis of factors

    Directory of Open Access Journals (Sweden)

    Jeliński Łukasz

    2017-01-01

    Full Text Available Road safety devices are designed to protect road users from the risk of injury or death. The principal type of restraint is the safety barrier. Deployed on sites with the highest risk of run-off-road accidents, safety barriers are mostly found on bridges, flyovers, central reservations, and on road edges which have fixed obstacles next to them. If properly designed and installed, safety barriers just as other road safety devices, should meet a number of functional features. This report analyses factors which may deteriorate functionality, ways to prevent this from happening and the thresholds for loss of road safety device functionality.

  15. A Simple Transfer Function for Nonlinear Dendritic Integration

    Directory of Open Access Journals (Sweden)

    Matt eSingh

    2015-08-01

    Full Text Available Relatively recent advances in patch clamp recordings and iontophoresis have enabled unprecedented study of neuronal post-synaptic integration (dendritic integration. Findings support a separate layer of integration in the dendritic branches before potentials reach the cell’s soma. While integration between branches obeys previous linear assumptions, proximal inputs within a branch produce threshold nonlinearity, which some authors have likened to the sigmoid function. Here we show the implausibility of a sigmoidal relation and present a more realistic transfer function in both an elegant artificial form and a biophysically derived form that further considers input locations along the dendritic arbor. As the distance between input locations determines their ability to produce nonlinear interactions, models incorporating dendritic topology are essential to understanding the computational power afforded by these early stages of integration. We use the biophysical transfer function to emulate empirical data using biophysical parameters and describe the conditions under which the artificial and biophysically derived forms are equivalent.

  16. Utilizing Electronic Health Record Information to Optimize Medication Infusion Devices: A Manual Data Integration Approach.

    Science.gov (United States)

    Chuk, Amanda; Maloney, Robert; Gawron, Joyce; Skinner, Colin

    Health information technology is increasingly utilized within healthcare delivery systems today. Two examples of this type of technology include the capture of patient-specific information within an electronic health record and intravenous medication infusion devices equipped with dose error reduction software known as drug libraries. Automatic integration of these systems, termed intravenous (IV) interoperability, should serve as the goal toward which all healthcare systems work to maximize patient safety. For institutions lacking IV interoperability, we describe a manual approach of querying the electronic health record to incorporate medication administration information with data from infusion device software to optimize drug library settings. This approach serves to maximize utilization of available information to optimize medication safety provided by drug library software.

  17. A Society of Devices: Integrating Intelligent Distributed Resources with Transactive Energy

    Energy Technology Data Exchange (ETDEWEB)

    Kok, Koen; Widergren, Steve

    2016-05-01

    Secure, Clean and Efficient Energy is one of the great societal challenges of our time. Electricity as a sustainable energy carrier plays a central role in the most effective transition scenarios towards sustainability. To harness this potential, the current electricity infrastructure needs to be rigorously re-engineered into an integrated and intelligent electricity system: the smart grid. Key elements of the smart grid vision are the coordination mechanisms. In such a system, vast numbers of devices, currently just passively connected to the grid, will become actively involved in system-wide and local coordination tasks. In this light, transactive energy (TE) is emerging as a strong contender for orchestrating the coordinated operation of so many devices.

  18. Optomechanical measurement of photon spin angular momentum and optical torque in integrated photonic devices

    CERN Document Server

    He, Li; Li, Mo

    2016-01-01

    Photons carry linear momentum, and spin angular momentum when circularly or elliptically polarized. During light-matter interaction, transfer of linear momentum leads to optical forces, while angular momentum transfer induces optical torque. Optical forces including radiation pressure and gradient forces have long been utilized in optical tweezers and laser cooling. In nanophotonic devices optical forces can be significantly enhanced, leading to unprecedented optomechanical effects in both classical and quantum regimes. In contrast, to date, the angular momentum of light and the optical torque effect remain unexplored in integrated photonics. Here, we demonstrate the measurement of the spin angular momentum of photons propagating in a birefringent waveguide and the use of optical torque to actuate rotational motion of an optomechanical device. We show that the sign and magnitude of the optical torque are determined by the photon polarization states that are synthesized on the chip. Our study reveals the mecha...

  19. Integrals of operator-valued functions

    Directory of Open Access Journals (Sweden)

    Raimond A. Struble

    1988-01-01

    Full Text Available Mikusinski-type expansions of operator-valued functions are discussed in some detail. As a natural part of the development, a “kernel” concept for operators is proposed and an elaborate system of convolution quotients in one and two variables is obtained.

  20. Integration and regulation of cardiovascular function.

    Science.gov (United States)

    Hall, J E

    1999-12-01

    New methods in molecular biology and genetics have made possible many of the dramatic advances in physiological research that have occurred in recent years. For those of us who spend most of our time in the research laboratory, it si sometimes difficult to avoid a research-oriented, reductionist mind-set when discussing physiology with students. This article illustrates, with a few examples, the importance of conveying a "big picture" conceptual framework before discussing the details of cardiovascular physiology. Also, I have chosen examples from cardiac output and blood pressure regulation that show the importance of discussing cardiovascular physiology in terms of feedback control systems and integrating information from other areas, such as renal and endocrine physiology. Finally, I have highlighted the importance of two principles that I believe are often underemphasized in teaching physiology: mass balance and time dependence of physiological control systems.

  1. Successful tactile based visual sensory substitution use functions independently of visual pathway integrity

    Directory of Open Access Journals (Sweden)

    Vincent eLee

    2014-05-01

    Full Text Available Purpose: We explored the microstructural differences between perinatally blind (PB, acquired blind (AB, and normally sighted controls (SC and related these differences to performance on functional tasks using a sensory substitution device (BrainPort. Methods: We enrolled 52 subjects (PB n=11; AQ n=35; NS n=6. Subjects spent 15 hours undergoing BrainPort device training. Outcomes of light perception, motion, direction, temporal resolution, grating, and acuity were tested at baseline and after training. Twenty-six of the subjects were scanned with a 3 Tesla MRI scanner for diffusion tensor imaging (DTI, and with a positron emission tomography (PET scanner for mapping regional brain glucose consumption during sensory substitution function. Non-parametric models were used to analyze fractional anisotropy (FA; a DTI measure of microstructural integrity of the brain via region-of-interest (ROI analysis and tract-based spatial statistics (TBSS. Results: At baseline, all subjects performed all tasks at chance level. After training, light perception, time resolution, location and grating acuity tasks improved significantly for all subject groups. ROI and TBSS analyses of FA maps show statistically significant differences (p≤0.025 in the bilateral optic radiations and some visual association areas between all 3 groups. No relationship was found between FA and functional performance with the BrainPort. Discussion: : All subjects showed performance improvements using the BrainPort irrespective of nature and duration of blindness. Definite brain areas with significant microstructural integrity changes exist among PB, AB, and NC, and these variations are most pronounced in the visual pathways. However, the use of sensory substitution devices is feasible irrespective of of microstructural integrity of the primary visual pathways between the eye and the brain. Therefore, tongue based devices devices may be usable for a broad array of non sighted persons.

  2. Pay-as-you-go data integration using functional dependencies

    NARCIS (Netherlands)

    Ayat, N.; Afsarmanesh, H.; Akbarinia, R.; Valduriez, P.

    2012-01-01

    Setting up a full data integration system for many application contexts, e.g. web and scientific data management, requires significant human effort which prevents it from being really scalable. In this paper, we propose IFD (Integration based on Functional Dependencies), a pay-as-you-go data integra

  3. Audiovisual Integration in High Functioning Adults with Autism

    Science.gov (United States)

    Keane, Brian P.; Rosenthal, Orna; Chun, Nicole H.; Shams, Ladan

    2010-01-01

    Autism involves various perceptual benefits and deficits, but it is unclear if the disorder also involves anomalous audiovisual integration. To address this issue, we compared the performance of high-functioning adults with autism and matched controls on experiments investigating the audiovisual integration of speech, spatiotemporal relations, and…

  4. Design and characterization of integrated photonic devices fabricated using selective-area epitaxy and distributed Bragg reflector surface gratings

    Science.gov (United States)

    Lammert, Robert Morand

    Two of the main challenges involved with the fabrication of integrated photonic devices are the control of the in-plane band gap and the formation of integrable high-Q cavities. In-plane bandgap control is required to fabricate emitters, passive waveguides, detectors, and modulators all on a single wafer and all optimized for operation at a particular wavelength. The formation of integrable high-Q cavities is needed to integrate the laser source. Selective-area epitaxy (SAE) is a powerful technique which enables the tailoring of the in-plane band gap energy to fabricate numerous optimized photonic devices on a single wafer. In this dissertation, a three-step SAE process in the InGaAs-GaAs-AlGaAs material system is investigated. This process produced discrete Fabry-Perot lasers with threshold currents as low as 2.65 mA for an uncoated device and 0.97 mA for a coated device. Several integrated photonic devices that utilize the in-plane bandgap control of this SAE process are also investigated. These devices include lasers with nonabsorbing mirrors, dual-channel wavelength division multiplexing sources with integrated coupler, lasers with integrated photodiodes, lasers with integrated intracavity modulators, and lasers with integrated external cavity modulators. The second challenge involved with the fabricating of integrated photonic devices is the formation of integrable high-Q cavities. The optical feedback in most laser diodes is provided by cleaved facets. Unfortunately, cleaved facets are not an option when designing integrated photonic devices. However, optical feedback can be provided in integrated photonic devices using distributed Bragg reflectors (DBRs). In this dissertation, ridge-waveguide DBR lasers with first-order surface gratings are investigated. These lasers exhibit low thresholds (6 mA), high slope efficiencies (0.46 W/A), and single-frequency operation with narrow linewidths (DBR grating, a wide wavelength range of 540 A (15.2 THz) is obtained

  5. DUAL INTEGRAL EQUATIONS INVOLVING LEGENDRE FUNCTIONS IN DISTRIBUTION SPACES

    Directory of Open Access Journals (Sweden)

    P. K. BANERJI, DESHNA LOONKER

    2010-11-01

    Full Text Available In this paper we use the Mehler-Fock transformation to obtain thesolution of dual integral equations involving Legendre functions. The solutionso obtained is proved to be distributional because they satisfy properties ofdistribution space.

  6. Does a Functional Integral Really Need a Lagrangian?

    Directory of Open Access Journals (Sweden)

    D. Kochan

    2010-01-01

    Full Text Available Path integral formulation of quantum mechanics (and also other equivalent formulations depends on a Lagrangian and/or Hamiltonian function that is chosen to describe the underlying classical system. The arbitrariness presented in this choice leads to a phenomenon called Quantization ambiguity. For example both L1 = ˙q2 and L2 = eq˙ are suitable Lagrangians on a classical level (δL1 = δL2, but quantum mechanically they are diverse. This paper presents a simple rearrangement of the path integral to a surface functional integral. It is shown that the surface functional integral formulation gives transition probability amplitude which is free of any Lagrangian/Hamiltonian and requires just the underlying classical equations of motion. A simple example examining the functionality of the proposed method is considered.

  7. Research of Integrity and Authentication in OPC UA Communication Using Whirlpool Hash Function

    Directory of Open Access Journals (Sweden)

    Kehe Wu

    2015-08-01

    Full Text Available Currently, the demand for information security of industrial control systems is becoming more and more urgent, but the security model proposed by OPC UA cannot meet the practical requirements of industrial control systems. For this reason, this paper proposes a new security communication model to provide integrity and authentication in OPC UA. This model uses the Whirlpool hash function to check integrity and generates digital signature along with RSA in message transmission. Compared to SHA-1, Whirlpool has a higher calculation speed and lower collision rate. Through this model, terminals in the upper layer can communicate with field devices via a channel with high security and efficiency.

  8. A simplified compact model of miniaturized cross-shaped CMOS integrated Hall devices

    Institute of Scientific and Technical Information of China (English)

    Huang Haiyun; Wang Dejun; Li Wenbo; Xu Yue; Qin Huibin; Hu Yongcai

    2012-01-01

    A simplified compact model for a miniaturized cross-shaped CMOS integrated Hall device is presented.The model has a simple circuit structure,only consisting of a passive network with eight non-linear resistors and four current-controlled voltage sources.It completely considers the following effects:non-linear conductivity,geometry dependence of sensitivity,temperature drift,lateral diffusion,and junction field effect.The model has been implemented in Verilog-A hardware description language and was successfully performed in a Cadence Spectre simulator.The simulation results are in good accordance with the classic experimental results reported in the literature.

  9. Integrated Channel Selector for Directing Fluid Flow Using Thermoreversible Gelation Controlled by a Digital Mirror Device

    Directory of Open Access Journals (Sweden)

    Yoshitaka Shirasaki

    2013-01-01

    Full Text Available An integrated channel selector system employing thermoreversible gelation of a polymer was developed. Here, we show a system with 3×3 arrayed microchannels having nine crossing points. Infrared laser irradiation was used to form gel areas at several crossing points in arranging a flow path from the inlet to one of the nine outlets passing through certain junctions and channels. The multipoint irradiation by the infrared laser was realized using a personal-computer-controlled digital mirror device. The system was demonstrated to be able to direct flow to all nine outlets. Finally, we achieved to produce flexible paths for flowing particles including side trips.

  10. A simplified compact model of miniaturized cross-shaped CMOS integrated Hall devices

    Science.gov (United States)

    Haiyun, Huang; Dejun, Wang; Wenbo, Li; Yue, Xu; Huibin, Qin; Yongcai, Hu

    2012-08-01

    A simplified compact model for a miniaturized cross-shaped CMOS integrated Hall device is presented. The model has a simple circuit structure, only consisting of a passive network with eight non-linear resistors and four current-controlled voltage sources. It completely considers the following effects: non-linear conductivity, geometry dependence of sensitivity, temperature drift, lateral diffusion, and junction field effect. The model has been implemented in Verilog-A hardware description language and was successfully performed in a Cadence Spectre simulator. The simulation results are in good accordance with the classic experimental results reported in the literature.

  11. Measurement of Thin Film Integrated Passive Devices on SiC through 500 C

    Science.gov (United States)

    Schwartz, Zachary D.; Ponchak, George E.; Alterovitz, Samuel A.; Downey, Alan N.; Chevalier, Christine T.

    2004-01-01

    Wireless communication in jet engines and high temperature industrial applications requires FD integrated circuits (RFICs) on wide bandgap semiconductors such as Silicon Carbide (SiC). In this paper, thin-film NiCr resistors, MIM capacitors, and spiral inductors are fabricated on a high purity semi-insulating 4H-SiC substrate. The devices are experimentally characterized through 50 GHz at temperatures of up to 500 C and the equivalent circuits are deembedded from the measured data. It is shown that the NiCr resistors are stable within 10% to 300 C while the capacitors have a value stable within 10% through 500 C.

  12. Miniaturized vortex transitional Josephson memory cell by a vertically integrated device structure

    Energy Technology Data Exchange (ETDEWEB)

    Nagasawa, Shuichi; Tahara, Shuichi; Numata, Hideaki; Tsuchida, Sanae (NEC Corp., Tsukuba (Japan))

    1994-03-01

    We have developed the smallest Josephson nondestructive read-out (NDRO) memory cell, called a vortex transitional (VT) memory cell, for a Josephson high-speed 16-Kbit RAM. Its size is 22 x 22 microns(sup 2), which is only 16% of the size of previously developed VT memory cells used in Josephson 4-Kbit RAM. This is achieved by developing a vertically integrated device structure and refining small-junction technology. The cell consists of Nb/AlO(sub x)/Nb junctions, three Nb wirings, SiO2 insulators and Mo resistors. The VT memory cells operate properly, with a large operating margin of +/- 20%. 13 refs.

  13. Integration of Multiple Components in Polystyrene-based Microfluidic Devices Part 2: Cellular Analysis

    Science.gov (United States)

    Anderson, Kari B.; Halpin, Stephen T.; Johnson, Alicia S.; Martin, R. Scott; Spence, Dana M.

    2012-01-01

    In Part II of this series describing the use of polystyrene (PS) devices for microfluidic-based cellular assays, various cellular types and detection strategies are employed to determine three fundamental assays often associated with cells. Specifically, using either integrated electrochemical sensing or optical measurements with a standard multi-well plate reader, cellular uptake, production, or release of important cellular analytes are determined on a PS-based device. One experiment involved the fluorescence measurement of nitric oxide (NO) produced within an endothelial cell line following stimulation with ATP. The result was a four-fold increase in NO production (as compared to a control), with this receptor-based mechanism of NO production verifying the maintenance of cell receptors following immobilization onto the PS substrate. The ability to monitor cellular uptake was also demonstrated by optical determination of Ca2+ into endothelial cells following stimulation with the Ca2+ ionophore A20317. The result was a significant increase (42%) in the calcium uptake in the presence of the ionophore, as compared to a control (17%) (p < 0.05). Finally, the release of catecholamines from a dopaminergic cell line (PC 12 cells) was electrochemically monitored, with the electrodes being embedded into the PS-based device. The PC 12 cells had better adherence on the PS devices, as compared to use of PDMS. Potassium-stimulation resulted in the release of 114 ± 11 µM catecholamines, a significant increase (p < 0.05) over the release from cells that had been exposed to an inhibitor (reserpine, 20 ± 2 µM of catecholamines). The ability to successfully measure multiple analytes, generated in different means from various cells under investigation, suggests that PS may be a useful material for microfluidic device fabrication, especially considering the enhanced cell adhesion to PS, its enhanced rigidity/amenability to automation, and its ability to enable a wider range of

  14. Integrated Control Strategies Supporting Autonomous Functionalities in Mobile Robots

    Science.gov (United States)

    2005-01-01

    Integrated Control Strategies Supporting Autonomous Functionalities in Mobile Robots B. Sightsa, H.R. Everetta, E. Biagtan Pacisa, G. Koguta M...TYPE N/A 3. DATES COVERED - 4. TITLE AND SUBTITLE Integrated Control Strategies Supporting Autonomous Functionalities in Mobile Robots 5a...calculation methods using encoder counts, wheel radius, and the robot’s wheelbase, as described in Sensors For Mobile Robots [5]. On top of this

  15. An integral estimate of Bessel function and its application

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    In this paper the authors give a new integral estimate of the Bessel function,which is an extension of Calder(?)n-Zygmund’s result.As an application of this result,we prove that the parameterized Marcinkiewicz integralμ_Ω~p with variable kernels is of type (2,2),where the kernel functionΩdoes not have any smoothness on the unit sphere in R~n.

  16. Integral Representation of Harmonic Function in a Half-Plane

    Institute of Scientific and Technical Information of China (English)

    LI Hong Wei; DENG Guan Tie

    2009-01-01

    In this article, we consider the integral representation of harmonic functions. Using a property of the modified Poisson kernel in a half plane, we prove that a harmonic function u(z) in a half plane with its positive part u+(z)=max{u(z), 0} satisfying a slowly growing condition can be represented by its integral of a measure on the boundary of the half plan.

  17. Biomimetic hand exotendon device (BiomHED) for functional hand rehabilitation in stroke.

    Science.gov (United States)

    Lee, Sang Wook; Landers, Katlin A; Park, Hyung-Soon

    2013-06-01

    Significant functional impairment of the hand is commonly observed among stroke survivors. In order to restore the functional use of the affected hand, we developed a biomimetic device that assists in generating functional movements of the hand. The device is actuated by exotendons that replicate the kinetic functional of the hand muscle-tendons, therefore it can reproduce the spatial finger joint coordination patterns of the functional manual tasks (e.g., power grip and pinch) with a reduced number of actuators. The system includes a thumb actuation mechanism, whose action is coordinated with finger exotendons to perform various manual tasks, thereby restoring the functional use of the hand. This paper presents the design of the device and the preliminary data of the functional movement generation by the system.

  18. [Urinary function integrity in the elderly person].

    Science.gov (United States)

    Roy, O; Rancourt, K

    1998-01-01

    How can nurses help preserve the integrity of elimination in the elderly? Further, what new perspectives must they bring to practice? First, health professionals must rid themselves of their misconceptions, especially the belief that incontinence is "normal" in the aging process. The authors provide avenues for reflection and action, with a view to arriving at a dynamic clinical practice focusing on quality of life and the well-being of the individual. In terms of new perspectives, nurses are encouraged to stop limiting themselves to assisting with personal hygiene because this deprives the client of possible recourse to a better adaptation. Nurses must no longer dispense comfort by reassuring the incontinent person that "there's no harm done". This message ignores the real-life experience associated with the problem and reinforces the idea of normality. Assessment of the client's condition must go beyond the superficial and instead target interventions that lead to a resolution. Updating the caregiver's and the client's knowledge, enhancing the nurse's role in prevention and treatment, combining various approaches to care and improving communication are good places to start.

  19. Development of Magnetically Excited Flexural Plate Wave Devices for Implementation as Physical, Chemical, and Acoustic Sensors, and as Integrated Micro-Pumps for Sensored Systems

    Science.gov (United States)

    Schubert, W. K.; Mitchell, M. A.; Graf, D. C.; Shul, R. J.

    2002-05-01

    The magnetically excited flexural plate wave (mag-FPW) device has great promise as a versatile sensor platform. FPW's can have better sensitivity at lower operating frequencies than surface acoustic wave (SAW) devices. Lower operating frequency simplifies the control electronics and makes integration of sensor with electronics easier. Magnetic rather than piezoelectric excitation of the FPW greatly simplifies the device structure and processing by eliminating the need for piezoelectric thin films, also simplifying integration issues. The versatile mag-FPW resonator structure can potentially be configured to fulfill a number of critical functions in an autonomous sensored system. As a physical sensor, the device can be extremely sensitive to temperature, fluid flow, strain, acceleration and vibration. By coating the membrane with self-assembled monolayers (SAMs), or polymer films with selective absorption properties (originally developed for SAW sensors), the mass sensitivity of the FPW allows it to be used as biological or chemical sensors. Yet another critical need in autonomous sensor systems is the ability to pump fluid. FPW structures can be configured as micro-pumps. This report describes work done to develop mag-FPW devices as physical, chemical, and acoustic sensors, and as micro-pumps for both liquid and gas-phase analytes to enable new integrated sensing platform.

  20. On Parameter Differentiation for Integral Representations of Associated Legendre Functions

    Science.gov (United States)

    Cohl, Howard S.

    2011-05-01

    For integral representations of associated Legendre functions in terms of modified Bessel functions, we establish justification for differentiation under the integral sign with respect to parameters. With this justification, derivatives for associated Legendre functions of the first and second kind with respect to the degree are evaluated at odd-half-integer degrees, for general complex-orders, and derivatives with respect to the order are evaluated at integer-orders, for general complex-degrees. We also discuss the properties of the complex function f: C\\{-1,1}→C given by f(z)=z/((z+1)1/2(z-1)1/2).

  1. On parameter differentiation for integral representations of associated Legendre functions

    CERN Document Server

    Cohl, Howard S

    2011-01-01

    For integral representations of associated Legendre functions in terms of modified Bessel functions, we establish justification for differentiation under the integral sign with respect to parameters. With this justification, derivatives for associated Legendre functions of the first and second kind with respect to the degree are evaluated at odd-half-integer degrees, for general complex-orders, and derivatives with respect to the order are evaluated at integer-orders, for general complex-degrees. We also discuss the properties of the complex function $f:\\C\\setminus\\{-1,1\\}\\to\\C$ given by $f(z)=z/\\sqrt{(z+1)(z-1)}$.

  2. Modelling of multidimensional quantum systems by the numerical functional integration

    Energy Technology Data Exchange (ETDEWEB)

    Lobanov, Yu.Yu.; Zhidkov, E.P. (Joint Inst. for Nuclear Research, Dubna (USSR)); Shahbagian, R.R. (Yerevan Physics Inst., Erevan (USSR))

    1990-01-01

    The employment of the numerical functional integration for the description of multidimensional systems in quantum and statistical physics is considered. For the multiple functional integrals with respect to Gaussian measures in the full separable metric spaces the new approximation formulas exact on a class of polynomial functionals of a given summary degree are constructed. The use of the formulas is demonstrated on example of computation of the Green function and the ground state energy in multidimensional Calogero model. The comparison of numerical results with the data obtained by the other authors which used the Monte Carlo method combined with iterative algorithms indicates that our formulas provide the higher efficiency of computations.

  3. Selective in situ functionalization of biosensors on LOC devices using laminar co-flow

    DEFF Research Database (Denmark)

    Parra-Cabrera, C.; Sporer, C.; Rodriguez-Villareal, I.

    2012-01-01

    Many applications involving lab-on-a-chip (LOC) devices are prevented from entering the market because of difficulties to achieve mass production and impart suitable properties allowing long-term storage. To integrate biosensors on these microfluidic chips, one of the main restrictions is the fab......Many applications involving lab-on-a-chip (LOC) devices are prevented from entering the market because of difficulties to achieve mass production and impart suitable properties allowing long-term storage. To integrate biosensors on these microfluidic chips, one of the main restrictions...

  4. 78 FR 73563 - Certain Electronic Devices Having Placeshifting or Display Replication Functionality and Products...

    Science.gov (United States)

    2013-12-06

    ... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Certain Electronic Devices Having Placeshifting or Display Replication Functionality and Products... in Default; Termination of Investigation AGENCY: U.S. International Trade Commission. ACTION:...

  5. Building-Integrated Solar Energy Devices based on Wavelength Selective Films

    Science.gov (United States)

    Ulavi, Tejas

    A potentially attractive option for building integrated solar is to employ hybrid solar collectors which serve dual purposes, combining solar thermal technology with either thin film photovoltaics or daylighting. In this study, two hybrid concepts, a hybrid photovoltaic/thermal (PV/T) collector and a hybrid 'solar window', are presented and analyzed to evaluate technical performance. In both concepts, a wavelength selective film is coupled with a compound parabolic concentrator (CPC) to reflect and concentrate the infrared portion of the solar spectrum onto a tubular absorber. The visible portion of the spectrum is transmitted through the concentrator to either a thin film Cadmium Telluride (CdTe) solar panel for electricity generation or into the interior space for daylighting. Special attention is given to the design of the hybrid devices for aesthetic building integration. An adaptive concentrator design based on asymmetrical truncation of CPCs is presented for the hybrid solar window concept. The energetic and spectral split between the solar thermal module and the PV or daylighting module are functions of the optical properties of the wavelength selective film and the concentrator geometry, and are determined using a Monte Carlo Ray-Tracing (MCRT) model. Results obtained from the MCRT can be used in conjugation with meteorological data for specific applications to study the impact of CPC design parameters including the half-acceptance angle thetac, absorber diameter D and truncation on the annual thermal and PV/daylighting efficiencies. The hybrid PV/T system is analyzed for a rooftop application in Phoenix, AZ. Compared to a system of the same area with independent solar thermal and PV modules, the hybrid PV/T provides 20% more energy, annually. However, the increase in total delivered energy is due solely to the addition of the thermal module and is achieved at an expense of a decrease in the annual electrical efficiency from 8.8% to 5.8% due to shading by

  6. Evaluation of a Family of Bessel Function Integrals

    CERN Document Server

    Birrell, Jeremiah

    2015-01-01

    We investigate a family of integrals involving modified Bessel functions that arise in the context of neutrino scattering. Recursive formulas are derived for evaluating these integrals and their asymptotic expansions are computed. We prove in certain cases that the asymptotic expansion yields the exact result after a finite number of terms. In each of these cases we derive a formula that bounds the order at which the expansion terminates. The method of calculation developed in this paper is applicable to similar families of integrals that involve Bessel or modified Bessel functions.

  7. Polymer-based electrochemical devices for logic functions and paper displays

    Science.gov (United States)

    Berggren, Magnus; Nilsson, David; Chen, Miaoxiang; Andersson, Peter; Kugler, Thomas; Malmstroem, Anna; Haell, Jessica; Remonen, Tommi; Robinson, Nathaniel D.

    2003-07-01

    Here, we report on devices based on patterned thin films of the conducting polymer system poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulphonic acid) (PEDOT:PSS) combined with patterns of solid electrolyte. The key device functionalities base on the updating of the RedOx state of PEDOT. This results in control of the electronic properties of this conjugated polymer, i.e. the conductivity and optical properties are updated. Based on this we have achieved electric current rectifiers, transistors and display cells. Also, matrix addressed displays will be presented. Electrochemical switching is taking place when the oxidation and reduction potentials are overcome respectively. Therefore, these devices operate at voltage levels less then 2 Volts. Low voltage operation is achieved in devices not requiring any extremely narrow dimensions, as is the case for field effect driven devices. All devices reported can or has been made using standard printing techniques on flexible carriers.

  8. Fluidic interconnections for microfluidic systems: A new integrated fluidic interconnection allowing plug 'n' play functionality

    DEFF Research Database (Denmark)

    Perozziello, Gerardo; Bundgaard, Frederik; Geschke, Oliver

    2008-01-01

    A crucial challenge in packaging of microsystems is microfluidic interconnections. These have to seal the ports of the system, and have to provide the appropriate interface to other devices or the external environment. Integrated fluidic interconnections appear to be a good solution...... for interconnecting polymer microsystems in terms of cost, space and performance. Following this path we propose a new reversible, integrated fluidic interconnection composed of custom-made cylindrical rings integrated in a polymer house next to the fluidic network. This allows plug 'n' play functionality between...... external metal ferrules and the system. Theoretical calculations are made to dimension and model the integrated fluidic interconnection. Leakage tests are performed on the interconnections, in order to experimentally confirm the model, and detect its limits....

  9. High-rate production of functional nanostructured films and devices by coupling flame spray pyrolysis with supersonic expansion.

    Science.gov (United States)

    Wegner, K; Vinati, S; Piseri, P; Antonini, A; Zelioli, A; Barborini, E; Ducati, C; Milani, P

    2012-05-11

    The fabrication of functional thin films and devices by direct deposition of nanoparticles from the gas phase is a promising approach enabling, for instance, the integration of complex analytical and sensing capabilities on microfabricated platforms. Aerosol-based techniques ensure large-scale nanoparticle production and they are potentially suited for this goal. However, they are not adequate in terms of fine control over the lateral resolution of the coatings, mild processing conditions (avoiding high temperature and aggressive chemicals), low contamination and compatibility with microfabrication processes. Here we report the high-rate and efficient production of functional nanostructured films by nanoparticle assembling obtained by the combination of flame spray pyrolysis and supersonic expansion. Our approach merges the advantages of flame spray pyrolysis for bulk nanopowders such as process stability and wide material library availability with those of supersonic cluster beam deposition in terms of lateral resolution and of direct integration of nanomaterials on devices. We efficiently produced nanostructured films and devices (such as gas sensors) using metal oxide, pure noble metal and oxide-supported noble metal nanoparticles.

  10. Finding new relationships between hypergeometric functions by evaluating Feynman integrals

    Energy Technology Data Exchange (ETDEWEB)

    Kniehl, Bernd A. [Santa Barbara Univ., CA (United States). Kavli Inst. for Theoretical Physics; Tarasov, Oleg V. [Hamburg Univ. (Germany). 2. Inst. fuer Theoretische Physik

    2011-08-15

    Several new relationships between hypergeometric functions are found by comparing results for Feynman integrals calculated using different methods. A new expression for the one-loop propagator-type integral with arbitrary masses and arbitrary powers of propagators is derived in terms of only one Appell hypergeometric function F{sub 1}. From the comparison of this expression with a previously known one, a new relation between the Appell functions F{sub 1} and F{sub 4} is found. By comparing this new expression for the case of equal masses with another known result, a new formula for reducing the F{sub 1} function with particular arguments to the hypergeometric function {sub 3}F{sub 2} is derived. By comparing results for a particular one-loop vertex integral obtained using different methods, a new relationship between F{sub 1} functions corresponding to a quadratic transformation of the arguments is established. Another reduction formula for the F{sub 1} function is found by analysing the imaginary part of the two-loop self-energy integral on the cut. An explicit formula relating the F{sub 1} function and the Gaussian hypergeometric function {sub 2}F{sub 1} whose argument is the ratio of polynomials of degree six is presented. (orig.)

  11. Integrating Internal Standards into Disposable Capillary Electrophoresis Devices To Improve Quantification

    Science.gov (United States)

    2017-01-01

    To improve point-of-care quantification using microchip capillary electrophoresis (MCE), the chip-to-chip variabilities inherent in disposable, single-use devices must be addressed. This work proposes to integrate an internal standard (ISTD) into the microchip by adding it to the background electrolyte (BGE) instead of the sample—thus eliminating the need for additional sample manipulation, microchip redesigns, and/or system expansions required for traditional ISTD usage. Cs and Li ions were added as integrated ISTDs to the BGE, and their effects on the reproducibility of Na quantification were explored. Results were then compared to the conclusions of our previous publication which used Cs and Li as traditional ISTDs. The in-house fabricated microchips, electrophoretic protocols, and solution matrixes were kept constant, allowing the proposed method to be reliably compared to the traditional method. Using the integrated ISTDs, both Cs and Li improved the Na peak area reproducibility approximately 2-fold, to final RSD values of 2.2–4.7% (n = 900). In contrast (to previous work), Cs as a traditional ISTD resulted in final RSDs of 2.5–8.8%, while the traditional Li ISTD performed poorly with RSDs of 6.3–14.2%. These findings suggest integrated ISTDs are a viable method to improve the precision of disposable MCE devices—giving matched or superior results to the traditional method in this study while neither increasing system cost nor complexity. PMID:28192985

  12. Beyond CMOS: heterogeneous integration of III-V devices, RF MEMS and other dissimilar materials/devices with Si CMOS to create intelligent microsystems.

    Science.gov (United States)

    Kazior, Thomas E

    2014-03-28

    Advances in silicon technology continue to revolutionize micro-/nano-electronics. However, Si cannot do everything, and devices/components based on other materials systems are required. What is the best way to integrate these dissimilar materials and to enhance the capabilities of Si, thereby continuing the micro-/nano-electronics revolution? In this paper, I review different approaches to heterogeneously integrate dissimilar materials with Si complementary metal oxide semiconductor (CMOS) technology. In particular, I summarize results on the successful integration of III-V electronic devices (InP heterojunction bipolar transistors (HBTs) and GaN high-electron-mobility transistors (HEMTs)) with Si CMOS on a common silicon-based wafer using an integration/fabrication process similar to a SiGe BiCMOS process (BiCMOS integrates bipolar junction and CMOS transistors). Our III-V BiCMOS process has been scaled to 200 mm diameter wafers for integration with scaled CMOS and used to fabricate radio-frequency (RF) and mixed signals circuits with on-chip digital control/calibration. I also show that RF microelectromechanical systems (MEMS) can be integrated onto this platform to create tunable or reconfigurable circuits. Thus, heterogeneous integration of III-V devices, MEMS and other dissimilar materials with Si CMOS enables a new class of high-performance integrated circuits that enhance the capabilities of existing systems, enable new circuit architectures and facilitate the continued proliferation of low-cost micro-/nano-electronics for a wide range of applications.

  13. Beyond CMOS: heterogeneous integration of III–V devices, RF MEMS and other dissimilar materials/devices with Si CMOS to create intelligent microsystems

    Science.gov (United States)

    Kazior, Thomas E.

    2014-01-01

    Advances in silicon technology continue to revolutionize micro-/nano-electronics. However, Si cannot do everything, and devices/components based on other materials systems are required. What is the best way to integrate these dissimilar materials and to enhance the capabilities of Si, thereby continuing the micro-/nano-electronics revolution? In this paper, I review different approaches to heterogeneously integrate dissimilar materials with Si complementary metal oxide semiconductor (CMOS) technology. In particular, I summarize results on the successful integration of III–V electronic devices (InP heterojunction bipolar transistors (HBTs) and GaN high-electron-mobility transistors (HEMTs)) with Si CMOS on a common silicon-based wafer using an integration/fabrication process similar to a SiGe BiCMOS process (BiCMOS integrates bipolar junction and CMOS transistors). Our III–V BiCMOS process has been scaled to 200 mm diameter wafers for integration with scaled CMOS and used to fabricate radio-frequency (RF) and mixed signals circuits with on-chip digital control/calibration. I also show that RF microelectromechanical systems (MEMS) can be integrated onto this platform to create tunable or reconfigurable circuits. Thus, heterogeneous integration of III–V devices, MEMS and other dissimilar materials with Si CMOS enables a new class of high-performance integrated circuits that enhance the capabilities of existing systems, enable new circuit architectures and facilitate the continued proliferation of low-cost micro-/nano-electronics for a wide range of applications. PMID:24567473

  14. Integrated electrofluidic circuits: pressure sensing with analog and digital operation functionalities for microfluidics.

    Science.gov (United States)

    Wu, Chueh-Yu; Lu, Jau-Ching; Liu, Man-Chi; Tung, Yi-Chung

    2012-10-21

    Microfluidic technology plays an essential role in various lab on a chip devices due to its desired advantages. An automated microfluidic system integrated with actuators and sensors can further achieve better controllability. A number of microfluidic actuation schemes have been well developed. In contrast, most of the existing sensing methods still heavily rely on optical observations and external transducers, which have drawbacks including: costly instrumentation, professional operation, tedious interfacing, and difficulties of scaling up and further signal processing. This paper reports the concept of electrofluidic circuits - electrical circuits which are constructed using ionic liquid (IL)-filled fluidic channels. The developed electrofluidic circuits can be fabricated using a well-developed multi-layer soft lithography (MSL) process with polydimethylsiloxane (PDMS) microfluidic channels. Electrofluidic circuits allow seamless integration of pressure sensors with analog and digital operation functions into microfluidic systems and provide electrical readouts for further signal processing. In the experiments, the analog operation device is constructed based on electrofluidic Wheatstone bridge circuits with electrical outputs of the addition and subtraction results of the applied pressures. The digital operation (AND, OR, and XOR) devices are constructed using the electrofluidic pressure controlled switches, and output electrical signals of digital operations of the applied pressures. The experimental results demonstrate the designed functions for analog and digital operations of applied pressures are successfully achieved using the developed electrofluidic circuits, making them promising to develop integrated microfluidic systems with capabilities of precise pressure monitoring and further feedback control for advanced lab on a chip applications.

  15. Regarding Chilcott's "Structural Functionalism as a Heuristic Device" Heuristically.

    Science.gov (United States)

    Blot, Richard K.

    1998-01-01

    The heuristic value of Chilcott's essay lies less in its support for structural functionalism and more in its concern to reexamine theory in the work of earlier educational anthropologists for what earlier theories and practices can add to current research. (SLD)

  16. Helping To Integrate The Visually Challenged Into Mainstream Society Through A Low-Cost Braille Device

    Directory of Open Access Journals (Sweden)

    Desirée Jordan

    2013-06-01

    Full Text Available The visually challenged are often alienated from mainstream society because of their disabilities. This problem is even more pronounced in developing countries which often do not have the resources necessary to integrate this people group into their communities or even help them to become independent. It should therefore be the aim of governments in developing countries to provide this vulnerable people group with access to assistive technologies at a low cost. This paper describes an ongoing project that aims to provide low-cost assistive technologies to the visually challenged in Barbados. As a part of this project a study was conducted on a sample of visually challenged members of the Barbados Association for the Blind and Deaf to determine their ICT skills, knowledge of Braille and their use of assistive technologies. An analysis of the results prompted the design and creation of a low-cost Braille device prototype. The cost of this prototype was about one-half that of a commercially available device and can be used without a screen reader. This device should help create equal opportunities for the visually challenged in Barbados and other developing countries. It should also allow the visually challenged to become more independent.

  17. A microfluidic device integrating plasmonic nanodevices for Raman spectroscopy analysis on trapped single living cells

    KAUST Repository

    Perozziello, Gerardo

    2013-11-01

    In this work we developed a microfluidic device integrating nanoplasmonic devices combined with fluidic trapping regions. The microfuidic traps allow to capture single cells in areas where plasmonic sensors are placed. In this way it is possible to perform Enhanced Raman analysis on the cell membranes. Moreover, by changing direction of the flux it is possible to change the orientation of the cell in the trap, so that it is possible to analyze different points of the membrane of the same cell. We shows an innovative procedure to fabricate and assembly the microfluidic device which combine photolithography, focused ion beam machining, and hybrid bonding between a polymer substrate and lid of Calcium fluoride. This procedure is compatible with the fabrication of the plasmonic sensors in close proximity of the microfluidic traps. Moreover, the use of Calcium fluoride as lid allows full compatibility with Raman measurements producing negligible Raman background signal and avoids Raman artifacts. Finally, we performed Raman analysis on cells to monitor their oxidative stress under particular non physiological conditions. © 2013 Elsevier B.V. All rights reserved.

  18. Upscaling of integrated photoelectrochemical water-splitting devices to large areas

    Science.gov (United States)

    Turan, Bugra; Becker, Jan-Philipp; Urbain, Félix; Finger, Friedhelm; Rau, Uwe; Haas, Stefan

    2016-09-01

    Photoelectrochemical water splitting promises both sustainable energy generation and energy storage in the form of hydrogen. However, the realization of this vision requires laboratory experiments to be engineered into a large-scale technology. Up to now only few concepts for scalable devices have been proposed or realized. Here we introduce and realize a concept which, by design, is scalable to large areas and is compatible with multiple thin-film photovoltaic technologies. The scalability is achieved by continuous repetition of a base unit created by laser processing. The concept allows for independent optimization of photovoltaic and electrochemical part. We demonstrate a fully integrated, wireless device with stable and bias-free operation for 40 h. Furthermore, the concept is scaled to a device area of 64 cm2 comprising 13 base units exhibiting a solar-to-hydrogen efficiency of 3.9%. The concept and its successful realization may be an important contribution towards the large-scale application of artificial photosynthesis.

  19. Immobilization Techniques and Integrated Signal Enhancement for POC Nanocolor Microfluidic Devices

    Directory of Open Access Journals (Sweden)

    Marlies Schlauf

    2015-01-01

    Full Text Available Resonance enhanced absorption (REA nanocolor microfluidic devices are new promising bioassay platforms, which employ nanoparticle- (NP- protein conjugates for the immunodetection of medically relevant markers in biologic samples such as blood, urine, and saliva. The core component of a REA test device is a PET chip coated with aluminum and SiO2 thin layers, onto which biorecognitive molecules are immobilized. Upon addition of a sample containing the analyte of interest, a NP-protein-analyte complex is formed in the test device that is captured on the REA chip, for example, via streptavidin-biotin interaction. Thereby, a colored symbol is generated, which allows optical readout. Silver enhancement of the bound nanoparticles may be used to increase the sensitivity of the assay. Herein, we demonstrate that adsorptive immobilization via a cationic polymeric interlayer is a competitive and fast technique for the binding of the capture protein streptavidin onto planar SiO2 surfaces such as REA biochips. Moreover, we report the development of a silver enhancement technology that operates even in the presence of high chloride concentrations as may be encountered in biologic samples. The silver enhancement reagents may be integrated into the microfluidic assay platform to be released upon sample addition. Hereby, a highly sensitive one-step assay can be realized.

  20. Flame hydrolysis deposition of glass on silicon for the integration of optical and microfluidic devices

    Science.gov (United States)

    Ruano; Benoit; Aitchison; Cooper

    2000-03-01

    Flame hydrolysis deposition (FHD) of glasses has previously found applications in the telecommunications industry. This paper shows how the technology can be used to deposit silica with different refractive indices and thereby produce low-loss planar waveguides for use in analytical applications. We also show that the glasses can be patterned using a new reactive ion etch and sealed using a modification of anodic bonding, such that the resulting microstructures can be readily incorporated within a lithographically defined "chip", integrating both optical and fluidic circuitry on the same device. In the example described in this paper, waveguides, analytical microtiter chambers and fluidic capillary channels, with the necessary high aspect ratio features (and with depths up to 40 microm) were all produced in glass, using the appropriate deposition and etching technologies. The performance of the chip was assessed in the framework of a low-volume fluorescence assay, using waveguides to address miniaturized microtiter chambers with volumes of 230 and 570 pL. Devices featuring different optical detection configurations, including both in-line and orthogonal waveguide geometries, were fabricated. In the optimal configuration, the experimental detection limit was determined as ca. 20 pM (equivalent to 10 zmol) of a cyanine fluorophore, Cy5. The applicability of the device as a biochip platform was further illustrated by analytical measurements on fluorescently labeled oligodeoxynucleotides.

  1. Upscaling of integrated photoelectrochemical water-splitting devices to large areas

    Science.gov (United States)

    Turan, Bugra; Becker, Jan-Philipp; Urbain, Félix; Finger, Friedhelm; Rau, Uwe; Haas, Stefan

    2016-01-01

    Photoelectrochemical water splitting promises both sustainable energy generation and energy storage in the form of hydrogen. However, the realization of this vision requires laboratory experiments to be engineered into a large-scale technology. Up to now only few concepts for scalable devices have been proposed or realized. Here we introduce and realize a concept which, by design, is scalable to large areas and is compatible with multiple thin-film photovoltaic technologies. The scalability is achieved by continuous repetition of a base unit created by laser processing. The concept allows for independent optimization of photovoltaic and electrochemical part. We demonstrate a fully integrated, wireless device with stable and bias-free operation for 40 h. Furthermore, the concept is scaled to a device area of 64 cm2 comprising 13 base units exhibiting a solar-to-hydrogen efficiency of 3.9%. The concept and its successful realization may be an important contribution towards the large-scale application of artificial photosynthesis. PMID:27601181

  2. OC ToGo: bed site image integration into OpenClinica with mobile devices

    Science.gov (United States)

    Haak, Daniel; Gehlen, Johan; Jonas, Stephan; Deserno, Thomas M.

    2014-03-01

    Imaging and image-based measurements nowadays play an essential role in controlled clinical trials, but electronic data capture (EDC) systems insufficiently support integration of captured images by mobile devices (e.g. smartphones and tablets). The web application OpenClinica has established as one of the world's leading EDC systems and is used to collect, manage and store data of clinical trials in electronic case report forms (eCRFs). In this paper, we present a mobile application for instantaneous integration of images into OpenClinica directly during examination on patient's bed site. The communication between the Android application and OpenClinica is based on the simple object access protocol (SOAP) and representational state transfer (REST) web services for metadata, and secure file transfer protocol (SFTP) for image transfer, respectively. OpenClinica's web services are used to query context information (e.g. existing studies, events and subjects) and to import data into the eCRF, as well as export of eCRF metadata and structural information. A stable image transfer is ensured and progress information (e.g. remaining time) visualized to the user. The workflow is demonstrated for a European multi-center registry, where patients with calciphylaxis disease are included. Our approach improves the EDC workflow, saves time, and reduces costs. Furthermore, data privacy is enhanced, since storage of private health data on the imaging devices becomes obsolete.

  3. Nanofabrication of SERS device by an integrated block-copolymer and nanoimprint lithography method.

    Energy Technology Data Exchange (ETDEWEB)

    Nealey, Paul (University of Wisconsin); Liu, Charlie (University of Wisconsin); Skinner, Jack L.; Yang, Elaine; Steinhaus, Charles A.; Yang, Chu-Yeu Peter

    2010-05-01

    The integration of block-copolymers (BCPs) and nanoimprint lithography (NIL) presents a novel and cost-effective approach to achieving nanoscale patterning capabilities. The authors demonstrate the fabrication of a surface-enhanced Raman scattering device using templates created by the BCP-NIL integrated method. The method utilizes a poly(styrene-block-methyl methacrylate) cylindrical-forming diblock-copolymer as a masking material to create a Si template, which is then used to perform a thermal imprint of a poly(methyl methacrylate) (PMMA) layer on a Si substrate. Au with a Cr adhesion layer was evaporated onto the patterned PMMA and the subsequent lift-off resulted in an array of nanodots. Raman spectra collected for samples of R6G on Si substrates with and without patterned nanodots showed enhancement of peak intensities due to the presence of the nanodot array. The demonstrated BCP-NIL fabrication method shows promise for cost-effective nanoscale fabrication of plasmonic and nanoelectronic devices.

  4. An in-fiber integrated optofluidic device based on an optical fiber with an inner core.

    Science.gov (United States)

    Yang, Xinghua; Yuan, Tingting; Teng, Pingping; Kong, Depeng; Liu, Chunlan; Li, Entao; Zhao, Enming; Tong, Chengguo; Yuan, Libo

    2014-06-21

    A new kind of optofluidic in-fiber integrated device based on a specially designed hollow optical fiber with an inner core is designed. The inlets and outlets are built by etching the surface of the optical fiber without damaging the inner core. A reaction region between the end of the fiber and a solid point obtained after melting is constructed. By injecting samples into the fiber, the liquids can form steady microflows and react in the region. Simultaneously, the emission from the chemiluminescence reaction can be detected from the remote end of the optical fiber through evanescent field coupling. The concentration of ascorbic acid (AA or vitamin C, Vc) is determined by the emission intensity of the reaction of Vc, H2O2, luminol, and K3Fe(CN)6 in the optical fiber. A linear sensing range of 0.1-3.0 mmol L(-1) for Vc is obtained. The emission intensity can be determined within 2 s at a total flow rate of 150 μL min(-1). Significantly, this work presents information for the in-fiber integrated optofluidic devices without spatial optical coupling.

  5. An Implantable Neuroprosthetic Device to Normalize Bladder Function after SCI

    Science.gov (United States)

    2014-12-01

    However, before these applications become possible, the responses from these visceral organs to PNS will have to be determined. This study only tested...et al. 2011), block chronic pain of peripheral origin (Cuellar et al. 2013; van Buyten et al. 2013), or restore urinary function after spinal cord...applications to block chronic pain (Cuellar et al. 2013; van Buyten et al. 2013). Understanding the mechanisms underlying this type of nerve block could

  6. A DSM-based framework for integrated function modelling

    DEFF Research Database (Denmark)

    Eisenbart, Boris; Gericke, Kilian; Blessing, Lucienne T. M.

    2017-01-01

    an integrated function modelling framework, which specifically aims at relating between the different function modelling perspectives prominently addressed in different disciplines. It uses interlinked matrices based on the concept of DSM and MDM in order to facilitate cross-disciplinary modelling and analysis...

  7. Riccati equation-based generalization of Dawson's integral function

    CERN Document Server

    Messina, R; Messina, A; Napoli, A

    2007-01-01

    A new generalization of Dawson's integral function based on the link between a Riccati nonlinear differential equation and a second-order ordinary differential equation is reported. The MacLaurin expansion of this generalized function is built up and to this end an explicit formula for a generic cofactor of a triangular matrix is deduced.

  8. Integrability of the Fourier transform: functions of bounded variation

    CERN Document Server

    Liflyand, E

    2012-01-01

    Certain relations between the Fourier transform of a function of bounded variation and the Hilbert transform of its derivative are revealed. The widest subspaces of the space of functions of bounded variation are indicated in which the cosine and sine Fourier transforms are integrable.

  9. STRONGLY CONTINUOUS INTEGRATED COSINE OPERATOR FUNCTIONS WITH GROWTH ω

    Institute of Scientific and Technical Information of China (English)

    Meiying Wang; Guoxiang Chen

    2007-01-01

    For a continuous increasing function ω: [0, ∞) → (0, ∞) of finite exponetial type, we establish a Hille-Yosida type theorem for strongly continuous integrated cosine operator functions with O(ω). It includes the well-known polynomially bounded and exponentially bounded cases.

  10. On Integral Means of Star-Like Functions

    Indian Academy of Sciences (India)

    Larisa Gromova; Alexander Vasil'ev

    2002-11-01

    We study univalent holomorphic functions in the unit disk $U = \\{z:|z| < 1\\}$ of the form $f(z) = z + _{n=2}^∞ a_n z^n$ that satisfy the condition Re $zf'(z)/f(z) > $ with $ \\in [0, 1)$ in . Some integral means of such functions are estimated.

  11. Spaceability and algebrability of sets of nowhere integrable functions

    CERN Document Server

    Glab, Szymon; Pellegrini, Leonardo

    2012-01-01

    We show that the set of Lebesgue integrable functions in $[0,1]$ which are nowhere essentially bounded is spaceable, improving a result from [F. J. Garc\\'{i}a-Pacheco, M. Mart\\'{i}n, and J. B. Seoane-Sep\\'ulveda. \\textit{Lineability, spaceability, and algebrability of certain subsets of function spaces,} Taiwanese J. Math., \\textbf{13} (2009), no. 4, 1257--1269], and that it is strongly $\\mathfrak{c}$-algebrable. We prove strong $\\mathfrak{c}$-algebrability and non-separable spaceability of the set of functions of bounded variation which have a dense set of jump discontinuities. Applications to sets of Lebesgue-nowhere-Riemann integrable and Riemann-nowhere-Newton integrable functions are presented as corollaries. In addition we prove that the set of Kurzweil integrable functions which are not Lebesgue integrable is spaceable (in the Alexievicz norm) but not 1-algebrable. We also show that there exists an infinite dimensional vector space $S$ of differentiable functions such that each element of the $C([0,1])...

  12. Facilitating Integration of Electron Beam Lithography Devices with Interactive Videodisc, Computer-Based Simulation and Job Aids.

    Science.gov (United States)

    Von Der Linn, Robert Christopher

    A needs assessment of the Grumman E-Beam Systems Group identified the requirement for additional skill mastery for the engineers who assemble, integrate, and maintain devices used to manufacture integrated circuits. Further analysis of the tasks involved led to the decision to develop interactive videodisc, computer-based job aids to enable…

  13. Integrated base stations and a method of transmitting data units in a communications system for mobile devices

    NARCIS (Netherlands)

    Bosch, H.G.P.; Mullender, Sape J.; Narlikar, G.J.; Samuel, L.G.; Yagati, L.N.

    2006-01-01

    Integrated base stations and a method of transmitting data units in a communications system for mobile devices. In one embodiment, an integrated base station includes a communications processor having a protocol stack configured with a media access control layer and a physical layer.

  14. Microfluidics & nanotechnology: Towards fully integrated analytical devices for the detection of cancer biomarkers

    KAUST Repository

    Perozziello, Gerardo

    2014-01-01

    In this paper, we describe an innovative modular microfluidic platform allowing filtering, concentration and analysis of peptides from a complex mixture. The platform is composed of a microfluidic filtering device and a superhydrophobic surface integrating surface enhanced Raman scattering (SERS) sensors. The microfluidic device was used to filter specific peptides (MW 1553.73 D) derived from the BRCA1 protein, a tumor-suppressor molecule which plays a pivotal role in the development of breast cancers, from albumin (66.5 KD), the most represented protein in human plasma. The filtering process consisted of driving the complex mixture through a porous membrane having a cut-off of 12-14 kD by hydrodynamic flow. The filtered samples coming out of the microfluidic device were subsequently deposited on a superhydrophobic surface formed by micro pillars on top of which nanograins were fabricated. The nanograins coupled to a Raman spectroscopy instrument acted as a SERS sensor and allowed analysis of the filtered sample on top of the surface once it evaporated. By using the presented platform, we demonstrate being able to sort small peptides from bigger proteins and to detect them by using a label-free technique at a resolution down to 0.1 ng μL-1. The combination of microfluidics and nanotechnology to develop the presented microfluidic platform may give rise to a new generation of biosensors capable of detecting low concentration samples from complex mixtures without the need for any sample pretreatment or labelling. The developed devices could have future applications in the field of early diagnosis of severe illnesses, e.g. early cancer detection. This journal is

  15. Nonvolatile write-once-read-many-times memory device with functionalized-nanoshells/PEDOT:PSS nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Avila-Nino, J.A.; Segura-Cardenas, E. [Universidad Autonoma de San Luis Potosi, Instituto de Investigacion en Comunicacion Optica, Alvaro Obregon 64 Zona Centro, 78000 SLP (Mexico); Sustaita, A.O. [Instituto Potosino de Investigacion Cientifica y Tecnologica, Camino a la presa San Jose 2055, CP 78216, San Luis Potosi (Mexico); Cruz-Cruz, I. [Universidad Autonoma de San Luis Potosi, Instituto de Investigacion en Comunicacion Optica, Alvaro Obregon 64 Zona Centro, 78000 SLP (Mexico); Lopez-Sandoval, R. [Instituto Potosino de Investigacion Cientifica y Tecnologica, Camino a la presa San Jose 2055, CP 78216, San Luis Potosi (Mexico); Reyes-Reyes, M., E-mail: reyesm@iico.uaslp.mx [Universidad Autonoma de San Luis Potosi, Instituto de Investigacion en Comunicacion Optica, Alvaro Obregon 64 Zona Centro, 78000 SLP (Mexico)

    2011-03-25

    We have investigated the memory effect of the nanocomposites of functionalized carbon nanoshells (f-CNSs) mixed with poly(3,4-ethylenedioxythiophene) doped with polystyrenesulfonate (PEDOT:PSS) polymer. The f-CNSs were synthesized by the spray pyrolysis method and functionalized in situ with functional groups (OH, COOH, C-H, C-OH) with the aim of improving their compatibility in the aqueous dispersion of PEDOT:PSS. The current-voltage (I-V) sweep curves at room temperature for the Al/f-CNSs, for certain concentrations range, embedded in a PEDOT:PSS layer/Al devices showed electrical bistability for write-once-read-many-times (WORM) memory devices. The memory effect observed in the devices can be explained due to the existence of trapped charges in the f-CNSs/PEDOT:PSS layer. The carrier transport mechanisms for the memory devices is studied and discussed.

  16. Integration of graphene sensor with electrochromic device on modulus-gradient polymer for instantaneous strain visualization

    Science.gov (United States)

    Yang, Tingting; Zhong, Yujia; Tao, Dashuai; Li, Xinming; Zang, Xiaobei; Lin, Shuyuan; Jiang, Xin; Li, Zhihong; Zhu, Hongwei

    2017-09-01

    In nature, some animals change their deceptive coloration for camouflage, temperature preservation or communication. This astonishing function has inspired scientists to replicate the color changing abilities of animals with artificial skin. Recently, some studies have focused on the smart materials and devices with reversible color changing or light-emitting properties for instantaneous strain visualization. However, most of these works only show eye-detectable appearance change when subjected to large mechanical deformation (100%-500% strain), and conspicuous color change at small strain remains rarely explored. In the present study, we developed a user-interactive electronic skin with human-readable optical output by assembling a highly sensitive resistive strain sensor with a stretchable organic electrochromic device (ECD) together. We explored the substrate effect on the electromechanical behavior of graphene and designed a strategy of modulus-gradient structure to employ graphene as both the highly sensitive strain sensing element and the insensitive stretchable electrode of the ECD layer. Subtle strain (0-10%) was enough to evoke an obvious color change, and the RGB value of the color quantified the magnitude of the applied strain. Such high sensitivity to smaller strains (0-10%) with color changing capability will potentially enhance the function of wearable devices, robots and prosthetics in the future.

  17. Integrals over the triplet distribution function without the triplet distribution function

    Science.gov (United States)

    Lado, F.

    While the triplet distribution function of disordered systems appears in a wide variety of problems in statistical mechanics, it does so always under an integral sign. In this paper, we propose a new method of evaluating such integrals that involves only pair functions throughout and avoids altogether the need for any explicit representation of the little-known triplet function. The procedure is based on an extension of integral equation theory of classical fluids. Numerical illustrations of the method are given for integrals that arise in the calculation of moments of a local field distribution.

  18. Anisotropic magnetostrictive metal-polymer composites for functional devices

    Science.gov (United States)

    Kiseleva, T. Yu.; Zholudev, S. I.; Il'inykh, I. A.; Novakova, A. A.

    2013-12-01

    New metal-polymer composites based on mechanochemically synthesized magnetostrictive Fe-Ga phase particles with dimensions of up to 2 μm dispersed and spatially oriented in a polymer matrix have been studied. The polymer matrix for spatial anisotropic stabilization of particles was represented by modified polyurethane (PU). An increase in the magnetostrictive effect was achieved by directed orientation of particles in a magnetic field applied during polymerization of the PU matrix. The spatial anisotropy of the composite has been studied by the methods of conversion Mössbauer spectroscopy with resonant X-ray detection and scanning electron microscopy. It is shown that the mechanochemical synthesis is an effective method of obtaining particles with microstress-enhanced magnetostriction. The use of these particles for the formation of a functional elastomer composite provides a material with significant magnetostrictive effect, which can be several-fold increased due to orientation of particles in an applied magnetic field. The obtained anisotropic magnetostrictive composite is a promising material for the creation of smart functional components of positioning systems, attenuators, and sensors.

  19. Anodizing color coded anodized Ti6Al4V medical devices for increasing bone cell functions

    Directory of Open Access Journals (Sweden)

    Webster TJ

    2013-01-01

    Full Text Available Alexandra P Ross, Thomas J WebsterSchool of Engineering and Department of Orthopedics, Brown University, Providence, RI, USAAbstract: Current titanium-based implants are often anodized in sulfuric acid (H2SO4 for color coding purposes. However, a crucial parameter in selecting the material for an orthopedic implant is the degree to which it will integrate into the surrounding bone. Loosening at the bone–implant interface can cause catastrophic failure when motion occurs between the implant and the surrounding bone. Recently, a different anodization process using hydrofluoric acid has been shown to increase bone growth on commercially pure titanium and titanium alloys through the creation of nanotubes. The objective of this study was to compare, for the first time, the influence of anodizing a titanium alloy medical device in sulfuric acid for color coding purposes, as is done in the orthopedic implant industry, followed by anodizing the device in hydrofluoric acid to implement nanotubes. Specifically, Ti6Al4V model implant samples were anodized first with sulfuric acid to create color-coding features, and then with hydrofluoric acid to implement surface features to enhance osteoblast functions. The material surfaces were characterized by visual inspection, scanning electron microscopy, contact angle measurements, and energy dispersive spectroscopy. Human osteoblasts were seeded onto the samples for a series of time points and were measured for adhesion and proliferation. After 1 and 2 weeks, the levels of alkaline phosphatase activity and calcium deposition were measured to assess the long-term differentiation of osteoblasts into the calcium depositing cells. The results showed that anodizing in hydrofluoric acid after anodizing in sulfuric acid partially retains color coding and creates unique surface features to increase osteoblast adhesion, proliferation, alkaline phosphatase activity, and calcium deposition. In this manner, this study

  20. Anodizing color coded anodized Ti6Al4V medical devices for increasing bone cell functions.

    Science.gov (United States)

    Ross, Alexandra P; Webster, Thomas J

    2013-01-01

    Current titanium-based implants are often anodized in sulfuric acid (H(2)SO(4)) for color coding purposes. However, a crucial parameter in selecting the material for an orthopedic implant is the degree to which it will integrate into the surrounding bone. Loosening at the bone-implant interface can cause catastrophic failure when motion occurs between the implant and the surrounding bone. Recently, a different anodization process using hydrofluoric acid has been shown to increase bone growth on commercially pure titanium and titanium alloys through the creation of nanotubes. The objective of this study was to compare, for the first time, the influence of anodizing a titanium alloy medical device in sulfuric acid for color coding purposes, as is done in the orthopedic implant industry, followed by anodizing the device in hydrofluoric acid to implement nanotubes. Specifically, Ti6Al4V model implant samples were anodized first with sulfuric acid to create color-coding features, and then with hydrofluoric acid to implement surface features to enhance osteoblast functions. The material surfaces were characterized by visual inspection, scanning electron microscopy, contact angle measurements, and energy dispersive spectroscopy. Human osteoblasts were seeded onto the samples for a series of time points and were measured for adhesion and proliferation. After 1 and 2 weeks, the levels of alkaline phosphatase activity and calcium deposition were measured to assess the long-term differentiation of osteoblasts into the calcium depositing cells. The results showed that anodizing in hydrofluoric acid after anodizing in sulfuric acid partially retains color coding and creates unique surface features to increase osteoblast adhesion, proliferation, alkaline phosphatase activity, and calcium deposition. In this manner, this study provides a viable method to anodize an already color coded, anodized titanium alloy to potentially increase bone growth for numerous implant applications.

  1. Silicon photonic integrated circuits with electrically programmable non-volatile memory functions.

    Science.gov (United States)

    Song, J-F; Lim, A E-J; Luo, X-S; Fang, Q; Li, C; Jia, L X; Tu, X-G; Huang, Y; Zhou, H-F; Liow, T-Y; Lo, G-Q

    2016-09-19

    Conventional silicon photonic integrated circuits do not normally possess memory functions, which require on-chip power in order to maintain circuit states in tuned or field-configured switching routes. In this context, we present an electrically programmable add/drop microring resonator with a wavelength shift of 426 pm between the ON/OFF states. Electrical pulses are used to control the choice of the state. Our experimental results show a wavelength shift of 2.8 pm/ms and a light intensity variation of ~0.12 dB/ms for a fixed wavelength in the OFF state. Theoretically, our device can accommodate up to 65 states of multi-level memory functions. Such memory functions can be integrated into wavelength division mutiplexing (WDM) filters and applied to optical routers and computing architectures fulfilling large data downloading demands.

  2. INTEGRATING THE LOGISTIC FUNCTION WITHIN ENTERPRISE’S FUNCTIONS

    Directory of Open Access Journals (Sweden)

    Cosmina Remeş

    2013-12-01

    Full Text Available Amplification and diversification of conditions in which an enterprise activates, is reflected in all the activities carried out within such. Coordination of the complex activities taking place within an enterprise requires a good management of information flows, as well as of physical flows. This situation calls for a better organization of activities within the enterprise. Taking into account that a flow implies movement of items in time and space, an issue of the utmost importance is to follow-up their trajectory within the enterprise. By grouping logistic activities within the same function, optimal management of the relationships within the enterprise, as well as interactions between such, is facilitated. Within current competitive context, characterized by a variety of customized offers, reduction of products life span, increasing requirements of the consumers who become ever more demanding, logistics occupies a key position within the continuous quest for the highest quality.

  3. Libcint: An efficient general integral library for Gaussian basis functions.

    Science.gov (United States)

    Sun, Qiming

    2015-08-15

    An efficient integral library Libcint was designed to automatically implement general integrals for Gaussian-type scalar and spinor basis functions. The library is able to evaluate arbitrary integral expressions on top of p, r and σ operators with one-electron overlap and nuclear attraction, two-electron Coulomb and Gaunt operators for segmented contracted and/or generated contracted basis in Cartesian, spherical or spinor form. Using a symbolic algebra tool, new integrals are derived and translated to C code programmatically. The generated integrals can be used in various types of molecular properties. To demonstrate the capability of the integral library, we computed the analytical gradients and NMR shielding constants at both nonrelativistic and 4-component relativistic Hartree-Fock level in this work. Due to the use of kinetically balanced basis and gauge including atomic orbitals, the relativistic analytical gradients and shielding constants requires the integral library to handle the fifth-order electron repulsion integral derivatives. The generality of the integral library is achieved without losing efficiency. On the modern multi-CPU platform, Libcint can easily reach the overall throughput being many times of the I/O bandwidth. On a 20-core node, we are able to achieve an average output 8.3 GB/s for C60 molecule with cc-pVTZ basis. © 2015 Wiley Periodicals, Inc.

  4. A digital microfluidic device with integrated nanostructured microelectrodes for electrochemical immunoassays.

    Science.gov (United States)

    Rackus, Darius G; Dryden, Michael D M; Lamanna, Julian; Zaragoza, Alexandre; Lam, Brian; Kelley, Shana O; Wheeler, Aaron R

    2015-01-01

    Nanostructured microelectrodes (NMEs) are three-dimensional electrodes that have superb sensitivity for electroanalysis. Here we report the integration of NMEs with the versatile fluid-handling system digital microfluidics (DMF), for eventual application to distributed diagnostics outside of the laboratory. In the new methods reported here, indium tin oxide DMF top plates were modified to include Au NMEs as well as counter and pseudoreference electrodes. The new system was observed to outperform planar sensing electrodes of the type that are typically integrated with DMF. A rubella virus (RV) IgG immunoassay was developed to evaluate the diagnostic potential for the new system, relying on magnetic microparticles coated with RV particles and analysis by differential pulse voltammetry. The limit of detection of the assay (0.07 IU mL(-1)) was >100× below the World Health Organization defined cut-off for rubella immunity. The sensitivity of the integrated device and its small size suggest future utility for distributed diagnostics.

  5. Affect integration and reflective function: clarification of central conceptual issues.

    Science.gov (United States)

    Solbakken, Ole André; Hansen, Roger Sandvik; Monsen, Jon Trygve

    2011-07-01

    The importance of affect regulation, modulation or integration for higher-order reflection and adequate functioning is increasingly emphasized across different therapeutic approaches and theories of change. These processes are probably central to any psychotherapeutic endeavor, whether explicitly conceptualized or not, and in recent years a number of therapeutic approaches have been developed that explicitly target them as a primary area of change. However, there still is important lack of clarity in the field regarding the understanding and operationalization of affect integration, particularly when it comes to specifying underlying mechanisms, the significance of different affect states, and the establishment of operational criteria for measurement. The conceptual relationship between affect integration and reflective function thus remains ambiguous. The present article addresses these topics, indicating ways in which a more complex and exhaustive understanding of integration of affect, cognition and behavior can be attained.

  6. Principles and core functions of integrated child health information systems.

    Science.gov (United States)

    Hinman, Alan R; Atkinson, Delton; Diehn, Tonya Norvell; Eichwald, John; Heberer, Jennifer; Hoyle, Therese; King, Pam; Kossack, Robert E; Williams, Donna C; Zimmerman, Amy

    2004-11-01

    Infants undergo a series of preventive and therapeutic health interventions and activities. Typically, each activity includes collection and submission of data to a dedicated information system. Subsequently, health care providers, families, and health programs must query each information system to determine the child's status in a given area. Efforts are underway to integrate information in these separate information systems. This requires specifying the core functions that integrated information systems must perform.

  7. An integral representation of functions in gas-kinetic models

    Science.gov (United States)

    Perepelitsa, Misha

    2016-08-01

    Motivated by the theory of kinetic models in gas dynamics, we obtain an integral representation of lower semicontinuous functions on {{{R}}^d,} {d≥1}. We use the representation to study the problem of compactness of a family of the solutions of the discrete time BGK model for the compressible Euler equations. We determine sufficient conditions for strong compactness of moments of kinetic densities, in terms of the measures from their integral representations.

  8. Large-scale photonic integration for advanced all-optical routing functions

    Science.gov (United States)

    Nicholes, Steven C.

    Advanced InP-based photonic integrated circuits are a critical technology to manage the increasing bandwidth demands of next-generation all-optical networks. Integrating many of the discrete functions required in optical networks into a single device provides a reduction in system footprint and optical losses by eliminating the fiber coupling junctions between components. This translates directly into increased system reliability and cost savings. Although many key network components have been realized via InP-based monolithic integration over the years, truly large-scale photonic ICs have only recently emerged in the marketplace. This lag-time has been mostly due to historically low device yields. In all-optical routing applications, large-scale photonic ICs may be able to address two of the key roadblocks associated with scaling modern electronic routers to higher capacities---namely, power and size. If the functions of dynamic wavelength conversion and routing are moved to the optical layer, we can eliminate the need for power-hungry optical-to-electrical (O/E) and electrical-to-optical (E/O) data conversions at each router node. Additionally, large-scale photonic ICs could reduce the footprint of such a system by combining the similar functions of each port onto a single chip. However, robust design and manufacturing techniques that will enable high-yield production of these chips must be developed. In this work, we demonstrate a monolithic tunable optical router (MOTOR) chip consisting of an array of eight 40-Gbps wavelength converters and a passive arrayed-waveguide grating router that functions as the packet-forwarding switch fabric of an all-optical router. The device represents one of the most complex InP photonic ICs ever reported, with more than 200 integrated functional elements in a single chip. Single-channel 40 Gbps wavelength conversion and channel switching using 231-1 PRBS data showed a power penalty as low as 4.5 dB with less than 2 W drive power

  9. Analisis Efektivitas Perangkat pada Program Desa Broadband Terpadu [Analysis of Device Effectiveness in Integrated Broadband Village Program

    Directory of Open Access Journals (Sweden)

    Hilarion Hamjen

    2016-12-01

    Full Text Available Pemerintah berkomitmen mendukung pertumbuhan e-commerce dan ekonomi digital di Indonesia untuk mencapai visi Indonesia 2020 sebagai negara ekonomi digital terbesar di Asia Tenggara. Secara fundamental diperlukan dukungan konektivitas nasional dari tingkat pusat sampai ke tingkat lokal, salah satunya melalui program KPU/USO yaitu program DBT (Desa Broadband Terpadu. Penelitian ini bertujuan untuk mengetahui efektivitas perangkat pada program DBT phase 1 dan keterkaitannya dengan konektivitas, dengan menggunakan metode analisis kepentingan kinerja dan uji statistik Chi square. Berdasarkan hasil penelitian diketahui bahwa efektivitas perangkat meliputi variabel kondisi, fungsi, pemeliharaan dan pemanfaatan rata-rata adalah 84,5 persen. Dengan nilai efektivitas tersebut diketahui bahwa keseluruhan variabel kondisi perangkat, fungsi dan pemanfaatannya tidak mempengaruhi konektivitas.  *****The Indonesian government has a strong commitment in supporting the growth of e-commerce and Digital Economy in Indonesia to attain Indonesia’s vision by 2020 as the largest digital economy nation in Southeast Asia. Fundamentally, the national connectivity supports from central level to local level are needed, where one of them comes from Integrated Broadband Village program. This research determines the effectiveness of devices in the DBT program and its correlation to the connectivity, by using importance-performance analysis method and Chi-square statistical test. It is known from the result that the effectiveness of devices, including condition, function, maintenance, and utilization variables, achieves 84.5 percent on average. The value shows that all mentioned variables have insignificant correlations to the connectivity.

  10. Expansion of a class of functions into an integral involving associated Legendre functions

    Directory of Open Access Journals (Sweden)

    Nanigopal Mandal

    1994-01-01

    Full Text Available A theorem for expansion of a class of functions into an integral involving associated Legendre functions is obtained in this paper. This is a somewhat general integral expansion formula for a function f(x defined in (x1,x2 where -1

  11. A Conceptual Project of a Device for Human Wrist Functional Rehabilitation

    Science.gov (United States)

    Lewandowski, B.; Olinski, M.; Wudarczyk, S.; Gronowicz, A.

    2016-12-01

    In the paper, the problems of devices supporting functional rehabilitation of a human wrist were addressed. A literature review and a description of selected devices together with an indication of their advantages and disadvantages were conducted. The biomechanical structure of a human wrist was analyzed. On this basis and after taking into consideration ranges of motion of the selected joints the concept of a new mechanism was developed. A 3D model of the device was built in the Autodesk Inventor system. For the purpose of simulations another model was developed in the MSC Adams system. Issues of drives and sensors selection, as well as requirements for the control system, were examined.

  12. Synthesis Methods, Microscopy Characterization and Device Integration of Nanoscale Metal Oxide Semiconductors for Gas Sensing

    Directory of Open Access Journals (Sweden)

    Randy L. Vander Wal

    2009-09-01

    Full Text Available A comparison is made between SnO2, ZnO, and TiO2 single-crystal nanowires and SnO2 polycrystalline nanofibers for gas sensing. Both nanostructures possess a one-dimensional morphology. Different synthesis methods are used to produce these materials: thermal evaporation-condensation (TEC, controlled oxidation, and electrospinning. Advantages and limitations of each technique are listed. Practical issues associated with harvesting, purification, and integration of these materials into sensing devices are detailed. For comparison to the nascent form, these sensing materials are surface coated with Pd and Pt nanoparticles. Gas sensing tests, with respect to H2, are conducted at ambient and elevated temperatures. Comparative normalized responses and time constants for the catalyst and noncatalyst systems provide a basis for identification of the superior metal-oxide nanostructure and catalyst combination. With temperature-dependent data, Arrhenius analyses are made to determine activation energies for the catalyst-assisted systems.

  13. Noise analysis and measurement of time delay and integration charge coupled device

    Institute of Scientific and Technical Information of China (English)

    Wang De-Jiang; Zhang Tao

    2011-01-01

    Time delay and integration(TDI)charge coupled device(CCD)noise sets a fundamental limit on image sensor performance,especially under low illumination in remote sensing applications.After introducing the complete sources of CCD noise,we study the effects of TDI operation mode on noise,and the relationship between different types of noise and number of the TDI stage.Then we propose a new technique to identify and measure sources of TDI CCD noise employing mathematical statistics theory,where theoretical analysis shows that noise estimated formulation converges well.Finally,we establish a testing platform to carry out experiments,and a standard TDI CCD is calibrated by using the proposed method.The experimental results show that the noise analysis and measurement methods presented in this paper are useful for modeling TDI CCDs.

  14. An integrated disposable device for DNA extraction and helicase dependent amplification.

    Science.gov (United States)

    Mahalanabis, Madhumita; Do, Jaephil; ALMuayad, Hussam; Zhang, Jane Y; Klapperich, Catherine M

    2010-04-01

    Here we report the demonstration of an integrated microfluidic chip that performs helicase dependent amplification (HDA) on samples containing live bacteria. Combined chip-based sample preparation and isothermal amplification are attractive for world health applications, since the need for instrumentation to control flow rate and temperature changes are reduced or eliminated. Bacteria lysis, nucleic acid extraction, and DNA amplification with a fluorescent reporter are incorporated into a disposable polymer cartridge format. Smart passive fluidic control using a flap valve and a hydrophobic vent (with a nanoporous PTFE membrane) with a simple on-chip mixer eliminates multiple user operations. The device is able to detect as few as ten colony forming units (CFU) of E. coli in growth medium.

  15. A Ratiometric Wavelength Measurement Based on a Silicon-on-Insulator Directional Coupler Integrated Device

    Directory of Open Access Journals (Sweden)

    Pengfei Wang

    2015-08-01

    Full Text Available A ratiometric wavelength measurement based on a Silicon-on-Insulator (SOI integrated device is proposed and designed, which consists of directional couplers acting as two edge filters with opposite spectral responses. The optimal separation distance between two parallel silicon waveguides and the interaction length of the directional coupler are designed to meet the desired spectral response by using local supermodes. The wavelength discrimination ability of the designed ratiometric structure is demonstrated by a beam propagation method numerically and then is verified experimentally. The experimental results have shown a general agreement with the theoretical models. The ratiometric wavelength system demonstrates a resolution of better than 50 pm at a wavelength around 1550 nm with ease of assembly and calibration.

  16. Digital television routing systems: An introduction to integrated optical waveguide techniques and devices

    Science.gov (United States)

    Willson, J. P.

    1985-08-01

    The development of a digital standard for the coding of component video signals has raised the problem of the appropriate technology to be used for the routing and distribution of such signals within a television studio center. Optical fibers offer a numberr of advantages over coaxial cable, such as high bandwidth, low loss, and small size. However, a major problem with optical transmission is that of routing the optical signals. One possible solution is to use integrated optical switches. The application of such devices for fabricating a large (100 x 100) array suitable for an all-digital BBC Television Centre is considered. The conclusion is that there remains a great deal of development to be done before such an array is feasible.

  17. Feasibility investigation of integrated optics Fourier transform devices. [holographic subtraction for multichannel data preprocessing

    Science.gov (United States)

    Verber, C. M.; Vahey, D. W.; Wood, V. E.; Kenan, R. P.; Hartman, N. F.

    1977-01-01

    The possibility of producing an integrated optics data processing device based upon Fourier transformations or other parallel processing techniques, and the ways in which such techniques may be used to upgrade the performance of present and projected NASA systems were investigated. Activities toward this goal include; (1) production of near-diffraction-limited geodesic lenses in glass waveguides; (2) development of grinding and polishing techniques for the production of geodesic lenses in LiNbO3 waveguides; (3) development of a characterization technique for waveguide lenses; and (4) development of a theory for corrected aspheric geodesic lenses. A holographic subtraction system was devised which should be capable of rapid on-board preprocessing of a large number of parallel data channels. The principle involved is validated in three demonstrations.

  18. NaBH4 generator integrated with energy conversion device based on hydrogen combustion

    Science.gov (United States)

    Netskina, O. V.; Fursenko, R. V.; Komova, O. V.; Odintsov, E. S.; Simagina, V. I.

    2015-01-01

    A thermoelectric energy conversion device operating on the heat generated by a hydrogen diffusion microflame has been developed. For the first time, a NaBH4 hydrogen generator has been employed as a source of fuel for such type of power generator. A 1%Ru-3%Co/Sibunit catalyst ensures hydrogen generation at a rate of 3 cm3 s-1 during 3 h. Power and efficiency characteristics of the integrated system consisting of a hydrogen generator and an energy converter based on combustion technologies have been studied experimentally. The total efficiency and the generated power of the system were measured to achieve values of up to 1.23% and 0.25 W, respectively. Ways to further improve the system's power output and efficiency characteristics have been discussed.

  19. Microbiological and functional evaluation of an alternative device (OB®) for estrous synchronization in ewes

    OpenAIRE

    2010-01-01

    The use of synthetic progestagens released by vaginal devices is an important tool to overcome the reproductive seasonality in sheep, but cost and/or subsequent vaginitis are limiting factors for their use. To identify economic, simple and innocuous alternative vaginal devices for estrous synchronization/induction protocols in sheep, this study aimed to evaluate the microbiological and functional viability of the human vaginal tampons (OB®) impregnated with medroxyprogesterone acetate (MAP) o...

  20. Total Correlation Function Integrals and Isothermal Compressibilities from Molecular Simulations

    DEFF Research Database (Denmark)

    Wedberg, Rasmus; Peters, Günther H.j.; Abildskov, Jens

    2008-01-01

    Generation of thermodynamic data, here compressed liquid density and isothermal compressibility data, using molecular dynamics simulations is investigated. Five normal alkane systems are simulated at three different state points. We compare two main approaches to isothermal compressibilities: (1...... in approximately the same amount of time. This suggests that computation of total correlation function integrals is a route to isothermal compressibility, as accurate and fast as well-established benchmark techniques. A crucial step is the integration of the radial distribution function. To obtain sensible results...

  1. Integrated nanoplasmonic waveguides for magnetic, nonlinear, and strong-field devices

    Science.gov (United States)

    Sederberg, Shawn; Firby, Curtis J.; Greig, Shawn R.; Elezzabi, Abdulhakem Y.

    2017-01-01

    As modern complementary-metal-oxide-semiconductor (CMOS) circuitry rapidly approaches fundamental speed and bandwidth limitations, optical platforms have become promising candidates to circumvent these limits and facilitate massive increases in computational power. To compete with high density CMOS circuitry, optical technology within the plasmonic regime is desirable, because of the sub-diffraction limited confinement of electromagnetic energy, large optical bandwidth, and ultrafast processing capabilities. As such, nanoplasmonic waveguides act as nanoscale conduits for optical signals, thereby forming the backbone of such a platform. In recent years, significant research interest has developed to uncover the fundamental physics governing phenomena occurring within nanoplasmonic waveguides, and to implement unique optical devices. In doing so, a wide variety of material properties have been exploited. CMOS-compatible materials facilitate passive plasmonic routing devices for directing the confined radiation. Magnetic materials facilitate time-reversal symmetry breaking, aiding in the development of nonreciprocal isolators or modulators. Additionally, strong confinement and enhancement of electric fields within such waveguides require the use of materials with high nonlinear coefficients to achieve increased nonlinear optical phenomenon in a nanoscale footprint. Furthermore, this enhancement and confinement of the fields facilitate the study of strong-field effects within the solid-state environment of the waveguide. Here, we review current state-of-the-art physics and applications of nanoplasmonic waveguides pertaining to passive, magnetoplasmonic, nonlinear, and strong-field devices. Such components are essential elements in integrated optical circuitry, and each fulfill specific roles in truly developing a chip-scale plasmonic computing architecture.

  2. Architecture, development and implementation of a SWIR to visible integrated up-conversion imaging device

    Science.gov (United States)

    Sarusi, Gabby; Templeman, Tzvi; Hechster, Elad; Nissim, Nimrod; Vitenberg, Vladimir; Maman, Nitzan; Tal, Amir; Solodar, Assi; Makov, Guy; Abdulhalim, Ibrahim; Visoly-Fisher, Iris; Golan, Yuval

    2016-04-01

    A new concept of short wavelength infrared (SWIR) to visible upconversion integrated imaging device is proposed, modeled and some initial measured results are presented. The device is a hybrid inorganic-organic device that comprises six nano-metric scale sub-layers grown on n-type GaAs substrates. The first layer is a ~300nm thick PbSe nano-columnar absorber layer grown in (111) orientation to the substrate plan (100), with a diameter of 8- 10nm and therefore exhibit quantum confinement effects parallel to the substrate and bulk properties perpendicular to it. The advantage of this structure is the high oscillator strength and hence absorption to incoming SWIR photons while maintaining the high bulk mobility of photo-excited charges along the columns. The top of the PbSe absorber layer is coated with 20nm thick metal layer that serves as a dual sided mirror, as well as a potentially surface plasmon enhanced absorption in the PbSe nano-columns layer. The photo-excited charges (holes and electrons in opposite directions) are drifted under an external applied field to the OLED section (that is composed of a hole transport layer, an emission layer and an electron transport layer) where they recombine with injected electron from the transparent cathode and emit visible light through this cathode. Due to the high absorption and enhanced transport properties this architecture has the potential of high quantum efficiency, low cost and easy implementation in any optical system. As a bench-mark, alternative concept where InGaAs/InP heterojunction couple to liquid crystal optical spatial light modulator (OSLM) structure was built that shows a full upconversion to visible of 1550nm laser light.

  3. Devices Based on Co-Integrated MEMS Actuators and Optical Waveguide: A Review

    Directory of Open Access Journals (Sweden)

    Franck Chollet

    2016-01-01

    Full Text Available The convergence of Micro Electro Mechanical Systems (MEMS and optics was, at the end of the last century, a fertile ground for a new breed of technological and scientific achievements. The weightlessness of light has been identified very early as a key advantage for micro-actuator application, giving rise to optical free-space MEMS devices. In parallel to these developments, the past 20 years saw the emergence of a less pursued approach relying on guided optical wave, where, pushed by the similarities in fabrication process, researchers explored the possibilities offered by merging integrated optics and MEMS technology. The interest of using guided waves is well known (absence of diffraction, tight light confinement, small size, compatibility with fiber optics but it was less clear how they could be harnessed with MEMS technology. Actually, it is possible to use MEMS actuators for modifying waveguide properties (length, direction, index of refraction or for coupling light between waveguide, enabling many new devices for optical telecommunication, astronomy or sensing. With the recent expansion to nanophotonics and optomechanics, it seems that this field still holds a lot of promises.

  4. Digital cell counting device integrated with a single-cell array.

    Science.gov (United States)

    Saeki, Tatsuya; Hosokawa, Masahito; Lim, Tae-kyu; Harada, Manabu; Matsunaga, Tadashi; Tanaka, Tsuyoshi

    2014-01-01

    In this paper, we present a novel cell counting method accomplished using a single-cell array fabricated on an image sensor, complementary metal oxide semiconductor sensor. The single-cell array was constructed using a microcavity array, which can trap up to 7,500 single cells on microcavities periodically arranged on a plane metallic substrate via the application of a negative pressure. The proposed method for cell counting is based on shadow imaging, which uses a light diffraction pattern generated by the microcavity array and trapped cells. Under illumination, the cell-occupied microcavities are visualized as shadow patterns in an image recorded by the complementary metal oxide semiconductor sensor due to light attenuation. The cell count is determined by enumerating the uniform shadow patterns created from one-on-one relationships with single cells trapped on the microcavities in digital format. In the experiment, all cell counting processes including entrapment of non-labeled HeLa cells from suspensions on the array and image acquisition of a wide-field-of-view of 30 mm(2) in 1/60 seconds were implemented in a single integrated device. As a result, the results from the digital cell counting had a linear relationship with those obtained from microscopic observation (r(2)  = 0.99). This platform could be used at extremely low cell concentrations, i.e., 25-15,000 cells/mL. Our proposed system provides a simple and rapid miniaturized cell counting device for routine laboratory use.

  5. Integrated RF photonic devices based on crystal ion sliced lithium niobate

    Science.gov (United States)

    Stenger, Vincent; Toney, James; Pollick, Andrea; Busch, James; Scholl, Jon; Pontius, Peter; Sriram, Sri

    2013-03-01

    This paper reports on the development of thin film lithium niobate (TFLN™) electro-optic devices at SRICO. TFLN™ is formed on various substrates using a layer transfer process called crystal ion slicing. In the ion slicing process, light ions such as helium and hydrogen are implanted at a depth in a bulk seed wafer as determined by the implant energy. After wafer bonding to a suitable handle substrate, the implanted seed wafer is separated (sliced) at the implant depth using a wet etching or thermal splitting step. After annealing and polishing of the slice surface, the transferred film is bulk quality, retaining all the favorable properties of the bulk seed crystal. Ion slicing technology opens up a vast design space to produce lithium niobate electro-optic devices that were not possible using bulk substrates or physically deposited films. For broadband electro-optic modulation, TFLN™ is formed on RF friendly substrates to achieve impedance matched operation at up to 100 GHz or more. For narrowband RF filtering functions, a quasi-phase matched modulator is presented that incorporates domain engineering to implement periodic inversion of electro-optic phase. The thinness of the ferroelectric films makes it possible to in situ program the domains, and thus the filter response, using only few tens of applied volts. A planar poled prism optical beam steering device is also presented that is suitable for optically switched true time delay architectures. Commercial applications of the TFLN™ device technologies include high bandwidth fiber optic links, cellular antenna remoting, photonic microwave signal processing, optical switching and phased arrayed radar.

  6. High-Performance Flexible Organic Nano-Floating Gate Memory Devices Functionalized with Cobalt Ferrite Nanoparticles.

    Science.gov (United States)

    Jung, Ji Hyung; Kim, Sunghwan; Kim, Hyeonjung; Park, Jongnam; Oh, Joon Hak

    2015-10-07

    Nano-floating gate memory (NFGM) devices are transistor-type memory devices that use nanostructured materials as charge trap sites. They have recently attracted a great deal of attention due to their excellent performance, capability for multilevel programming, and suitability as platforms for integrated circuits. Herein, novel NFGM devices have been fabricated using semiconducting cobalt ferrite (CoFe2O4) nanoparticles (NPs) as charge trap sites and pentacene as a p-type semiconductor. Monodisperse CoFe2O4 NPs with different diameters have been synthesized by thermal decomposition and embedded in NFGM devices. The particle size effects on the memory performance have been investigated in terms of energy levels and particle-particle interactions. CoFe2O4 NP-based memory devices exhibit a large memory window (≈73.84 V), a high read current on/off ratio (read I(on)/I(off)) of ≈2.98 × 10(3), and excellent data retention. Fast switching behaviors are observed due to the exceptional charge trapping/release capability of CoFe2O4 NPs surrounded by the oleate layer, which acts as an alternative tunneling dielectric layer and simplifies the device fabrication process. Furthermore, the NFGM devices show excellent thermal stability, and flexible memory devices fabricated on plastic substrates exhibit remarkable mechanical and electrical stability. This study demonstrates a viable means of fabricating highly flexible, high-performance organic memory devices. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Online evaluation system for the photo-physical properties of organic photoelectric materials and device integrated with the device fabrication instrument

    Science.gov (United States)

    Zhang, Hongyan; Meng, Lingqiang; Liu, Weimin; Wang, Pengfei

    2016-09-01

    Organic photoelectric materials have showing a wide application prospect in the fields of energy, environment, information and biology because of their unique advantages. However, it is still not clear for us to understand some basic photo-physical processes (i.e. energy transfer, charge transfer, charge separation and recombination, etc.), which has affected the performance of materials and devices. This is very incompatible with the rapidly growing demand of the organic photoelectric materials and devices, and it has been one of the core problems that constraints the further applications of organic photoelectric materials and devices. The lack of the necessary systems and means is a major reason. Thus, it is a very necessary urgent task to develop new methods and technologies to evaluate the photo-physical properties of organic photoelectric materials and equipment systems. In this paper, an on-line research system for photo-physical properties is established to detect the intrinsic character of the organic photoelectric materials and devices, which integrates the fabrication instrument of the film materials and devices with the online measuring equipment combing with the high vacuum technology and the steady state transient spectrum measurement. A standard OLED device was fabricated and the electrluminescence spectra, current density, brightness, current efficiency and the power efficiency were got using this system avoiding the affect of the air and water. The results indict this system not only plays an important promoting role for the theoretical research of organic photoelectric materials and devices, but also helps improving the research level of organic photoelectric materials and devices. This work is expected to produce some potential innovating results with the international advanced level and make contributions to needs of national strategy.

  8. Integration of Biological Specificity with Solid-State Devices for Selective Chemical Sensing

    Science.gov (United States)

    2016-01-29

    transferred from air into a liquid or hydrogel layer that passes over a bank of aptamer functionalized sensor arrays. Figure 5. A multi-tip nanoscale...see any limitations for the integration of solid-state aptamer sensors with liquid flow cells. We have also investigated the scaling of chemiresistors...complex 3D structure. However, we did not test the aptamer against the ATP target, because the latter requires a liquid solution environment and our

  9. A New Approach of Electronics and Photonics Convergence on Si CMOS Platform: How to Reduce Device Diversity of Photonics for Integration

    Directory of Open Access Journals (Sweden)

    Kazumi Wada

    2008-01-01

    Full Text Available Integrated photonics via Si CMOS technology has been a strategic area since electronics and photonics convergence should be the next platform for information technology. The platform is recently referred to as “Si photonics” that attracts much interest of researchers in industries as well as academia in the world. The main goal of Si Photonics is currently to reduce material diversity of photonic devices to pursuing CMOS-compatibility. In contrast, the present paper proposes another route of Si Photonics, reducing diversity of photonic devices. The proposed device unifying functionality of photonics is a microresonator with a pin diode structure that enables the Purcell effect and Franz-Keldysh effect to emit and to modulate light from SiGe alloys.

  10. Design and Development of a TEG Cogenerator Device Integrated into a Self-Standing Natural Combustion Gas Stove

    Science.gov (United States)

    Codecasa, Matteo Paolo; Fanciulli, Carlo; Gaddi, Roberto; Gomez-Paz, Francisco; Passaretti, Francesca

    2015-01-01

    Heating by gas combustion, by use of different types of systems and plants, is widespread in residential and industrial environments. One example is the gas stove, the heat-radiating unit of which operates autonomously with a local gas feed and, possibly, electricity for an optional fan convector. A thermoelectric generator (TEG) can be integrated within this type of autonomous gas heater for local production of electric power, to support electrical auxiliaries, where desired, without the need for any connection to the electricity grid. This approach can lead to easier installation and operation and increases overall efficiency. A new prototype of an autonomous gas heater has been implemented by integration of a TEG device of simple and robust design, easily operated by the end user. A small amount of heat is withdrawn and converted into electricity by the TEG. This enables self-sustaining operation and, moreover, powers new ancillary functions (e.g. fan convector) without extra electrical requirements and no need for an electrical connection.

  11. On Parameter Differentiation for Integral Representations of Associated Legendre Functions

    Directory of Open Access Journals (Sweden)

    Howard S. Cohl

    2011-05-01

    Full Text Available For integral representations of associated Legendre functions in terms of modified Bessel functions, we establish justification for differentiation under the integral sign with respect to parameters. With this justification, derivatives for associated Legendre functions of the first and second kind with respect to the degree are evaluated at odd-half-integer degrees, for general complex-orders, and derivatives with respect to the order are evaluated at integer-orders, for general complex-degrees. We also discuss the properties of the complex function f: C{−1,1}→C given by f(z=z/((z+1^{1/2}(z−1^{1/2}.

  12. The functional integral formulation of the Schrieffer-Wolff transformation

    Science.gov (United States)

    Zamani, Farzaneh; Ribeiro, Pedro; Kirchner, Stefan

    2016-06-01

    We revisit the Schrieffer-Wolff transformation and present a path integral version of this important canonical transformation. The equivalence between the low-energy sector of the Anderson model in the so-called local moment regime and the spin-isotropic Kondo model is usually established via a canonical transformation performed on the Hamiltonian, followed by a projection. Here we present a path integral formulation of the Schrieffer-Wolff transformation which relates the functional integral form of the partition function of the Anderson model to that of its effective low-energy model. The resulting functional integral assumes the form of a spin path integral and includes a geometric phase factor, i.e. a Berry phase. Our approach stresses the underlying symmetries of the model and allows for a straightforward generalization of the transformation to more involved models. It thus not only sheds new light on a classic problem, it also offers a systematic route of obtaining effective low-energy models and higher order corrections. This is demonstrated by obtaining the effective low-energy model of a quantum dot attached to two ferromagnetic leads.

  13. Microbes Online: an integrated portal for comparative functional genomics

    OpenAIRE

    Arkin, Adam P.

    2014-01-01

    Since 2003, MicrobesOnline (http://www.microbesonline.org) has been providing a community resource for comparative and functional genome analysis. The portal includes over 1000 complete genomes of bacteria, archaea and fungi, as well as 1000s of viruses and plasmids. In addition to standard comparative genomic analysis, including gene prediction, sequence homology, domain identification, gene family assignments and functional annotations from E.C. and GO, MicrobesOnline integrates data from ...

  14. Integrated process and dual-function catalyst for olefin epoxidation

    Science.gov (United States)

    Zhou, Bing; Rueter, Michael

    2003-01-01

    The invention discloses a dual-functional catalyst composition and an integrated process for production of olefin epoxides including propylene oxide by catalytic reaction of hydrogen peroxide from hydrogen and oxygen with olefin feeds such as propylene. The epoxides and hydrogen peroxide are preferably produced simultaneously in situ. The dual-functional catalyst comprises noble metal crystallites with dimensions on the nanometer scale (on the order of olefin oxides such as propylene oxide without formation of undesired co-products.

  15. Compact Electrochemical System Using On-Chip Sensor Electrodes and Integrated Devices

    Science.gov (United States)

    Yamazaki, Tomoyuki; Ikeda, Takaaki; Ishida, Makoto; Sawada, Kazuaki

    2011-04-01

    We report a compact electrochemical sensing system to implement cyclic voltammetry. This type of sensor needs a working electrode, counter electrode, and reference electrode, all of which were integrated on a single chip. The electrochemical system also needs a potentiostat and an input voltage-generating circuit, which were developed using on-chip active devices and a few discrete passive components. This is the first sensor system incorporating electrode-side input voltage generation for electrochemical measurements using an on-chip operational amplifier, which replaces a bulky external voltage controller. A continuous cyclic voltammetry measurement was conducted with a well-studied ferricyanide solution to demonstrate the operation of the intelligent sensor chip. A clear peak was observed and linearity to the target chemical concentration was obtained between the peak height and concentration of the ferricyanide solution. With potential for mass production and small size, this sensor chip could be the best candidate to realize point-of-care testing. This sensor chip is a milestone of a fully integrated electrochemical sensor chip.

  16. Intra-Chip Free-Space Optical Interconnect: System, Device, Integration and Prototyping

    Science.gov (United States)

    Ciftcioglu, Berkehan

    Currently, on-chip optical interconnect schemes already proposed utilize circuit switching using wavelength division multiplexing (WDM) or all-optical packet switching, all based on planar optical waveguides and related photonic devices such as microrings. These proposed approaches pose significant challenges in latency, energy efficiency, integration, and scalability. This thesis presents a new alternative approach by utilizing free-space optics. This 3-D integrated intra-chip free-space optical interconnect (FSOI) leverages mature photonic devices such as integrated lasers, photodiodes, microlenses and mirrors. It takes full advantages of the latest developments in 3-D integration technologies. This interconnect system provides point-to-point free-space optical links between any two communication nodes to construct an all-to-all intra-chip communication network with little or no arbitration. Therefore, it has significant networking advantages over conventional electrical and waveguide-based optical interconnects. An FSOI system is evaluated based on the real device parameters, predictive technology models and International Roadmap of Semiconductor's predictions. A single FSOI link achieves 10-Gbps data rate with 0.5-pJ/bit energy efficiency and less than 10--12 bit-error-rate (BER). A system using this individual link can provide scalability up to 36 nodes, providing 10-Tbps aggregate bandwidth. A comparison analysis performed between a WDM-based waveguide interconnect system and the proposed FSOI system shows that FSOI achieves better energy efficiency than the WDM one as the technology scales. Similarly, network simulation on a 16-core microprocessor using the proposed FSOI system instead of mesh networks has been shown to speed up the system by 12% and reduce the energy consumption by 33%. As a part of the development of a 3-D integrated FSOI system, operating at 850 nm with a 10-Gbps data rate per optical link, the photonics devices and optical components are

  17. Patterned photostimulation with digital micromirror devices to investigate dendritic integration across branch points.

    Science.gov (United States)

    Liang, Conrad W; Mohammadi, Michael; Santos, M Daniel; Santos, M Danial; Tang, Cha-Min

    2011-03-02

    Light is a versatile and precise means to control neuronal excitability. The recent introduction of light sensitive effectors such as channel-rhodopsin and caged neurotransmitters have led to interests in developing better means to control patterns of light in space and time that are useful for experimental neuroscience. One conventional strategy, employed in confocal and 2-photon microscopy, is to focus light to a diffraction limited spot and then scan that single spot sequentially over the region of interest. This approach becomes problematic if large areas have to be stimulated within a brief time window, a problem more applicable to photostimulation than for imaging. An alternate strategy is to project the complete spatial pattern on the target with the aid of a digital micromirror device (DMD). The DMD approach is appealing because the hardware components are relatively inexpensive and is supported by commercial interests. Because such a system is not available for upright microscopes, we will discuss the critical issues in the construction and operations of such a DMD system. Even though we will be primarily describing the construction of the system for UV photolysis, the modifications for building the much simpler visible light system for optogenetic experiments will also be provided. The UV photolysis system was used to carryout experiments to study a fundamental question in neuroscience, how are spatially distributed inputs integrated across distal dendritic branch points. The results suggest that integration can be non-linear across branch points and the supralinearity is largely mediated by NMDA receptors.

  18. A Microfluidic Device with Integrated Sonication and Immunoprecipitation for Sensitive Epigenetic Assays.

    Science.gov (United States)

    Cao, Zhenning; Lu, Chang

    2016-02-01

    Epigenetic studies increasingly require analysis of a small number of cells that are of one specific type and derived from patients or animals. In this report, we demonstrate a simple microfluidic device that integrates sonication and immunoprecipitation (IP) for epigenetic assays, such as chromatin immunoprecipitation (ChIP) and methylated DNA immunoprecipitation (MeDIP). By incorporating an ultrasonic transducer with a microfluidic chamber, we implemented microscale sonication for both shearing chromatin/DNA and mixing/washing of IP beads. Such integration allowed highly sensitive tests starting with 100 cross-linked cells for ChIP or 500 pg of genomic DNA for MeDIP (compared to 10(6)-10(7) cells for ChIP and 1-10 μg of DNA for MeDIP in conventional assays). The entire on-chip process of sonication and IP took only 1 h. Our tool will be useful for highly sensitive epigenetic studies based on a small quantity of sample.

  19. A multi-structural and multi-functional integrated fog collection system in cactus.

    Science.gov (United States)

    Ju, Jie; Bai, Hao; Zheng, Yongmei; Zhao, Tianyi; Fang, Ruochen; Jiang, Lei

    2012-01-01

    Multiple biological structures have demonstrated fog collection abilities, such as beetle backs with bumps and spider silks with periodic spindle-knots and joints. Many Cactaceae species live in arid environments and are extremely drought-tolerant. Here we report that one of the survival systems of the cactus Opuntia microdasys lies in its efficient fog collection system. This unique system is composed of well-distributed clusters of conical spines and trichomes on the cactus stem; each spine contains three integrated parts that have different roles in the fog collection process according to their surface structural features. The gradient of the Laplace pressure, the gradient of the surface-free energy and multi-function integration endow the cactus with an efficient fog collection system. Investigations of the structure-function relationship in this system may help us to design novel materials and devices to collect water from fog with high efficiencies.

  20. Reexamination of molecular integrals arising from the Dirac equation. Analytical evaluation of molecular auxiliary functions integrals

    OpenAIRE

    Bagci, A.

    2016-01-01

    In this work, analytical solutions to relativistic molecular integrals are proposed for use in ab-initio molecular electronic structure calculations. They are expressed through molecular auxiliary functions integrals in prolate spheroidal coordinates. Recurrence relations and new convergent series representation formulae are derived. They involve Slater-type orbitals basis set with non-integer principal quantum numbers. The comparison is made with the benchmark results of use numerical global...

  1. A new laryngeal mask supraglottic airway device with integrated balloon line: a descriptive and comparative bench study

    Directory of Open Access Journals (Sweden)

    Zhou YH

    2016-11-01

    Full Text Available YingHai Zhou,1 Korinne Jew2 1Research & Development, Patient Monitoring & Recovery, Medtronic Technology Center, Shanghai, People’s Republic of China; 2Medical Affairs, Minimally Invasive Therapies Group, Medtronic, Boulder, CO, USA Abstract: Laryngeal masks are invasive devices for airway management placed in the supraglottic position. The Shiley™ laryngeal mask (Shiley™ LM features an integrated inflation tube and airway shaft to facilitate product insertion and reduce the chance of tube occlusion when patients bite down. This study compared the Shiley LM to two other disposable laryngeal mask devices, the Ambu® AuraStraight™ and the LMA Unique™. Overall device design, tensile strength, flexibility of various structures, and sealing performance were measured. The Shiley LM is structurally stronger and its shaft is more resistant to compression than the other devices. The Shiley LM is generally less flexible than the other devices, but this relationship varies with device size. Sealing performance of the devices was similar in a bench assay. The results of this bench study demonstrate that the new Shiley LM resembles other commercially available laryngeal mask devices, though it exhibits greater tensile strength and lower flexibility. Keywords: laryngeal mask, supraglottic airway, supralaryngeal device

  2. Polymer density functional approach to efficient evaluation of path integrals

    DEFF Research Database (Denmark)

    Brukhno, Andrey; Vorontsov-Velyaminov, Pavel N.; Bohr, Henrik

    2005-01-01

    A polymer density functional theory (P-DFT) has been extended to the case of quantum statistics within the framework of Feynman path integrals. We start with the exact P-DFT formalism for an ideal open chain and adapt its efficient numerical solution to the case of a ring. We show that, similarly......, the path integral problem can, in principle, be solved exactly by making use of the two-particle pair correlation function (2p-PCF) for the ends of an open polymer, half of the original. This way the exact data for one-dimensional quantum harmonic oscillator are reproduced in a wide range of temperatures......-consistent iteration so as to correctly account for the interparticle interactions. The algorithm is speeded up by taking convolutions with the aid of fast Fourier transforms. We apply this approximate path integral DFT (PI-DFT) method to systems within spherical symmetry: 3D harmonic oscillator, atoms of hydrogen...

  3. Social Integration and Functional Skills in Older Adults

    Directory of Open Access Journals (Sweden)

    Diana María Durán

    2008-05-01

    Full Text Available The objective of this study is to identify the relationship between variables: functional abilities and social integration of older persons and to know whether there were differences according to sex, age and marital status. The results show significant differences in social integration on the basis of marital status, being higher in the elderly unmarried and widowed; Depending on age there are significant differences in functional abilities, being higher in adults between 60 and 65 years. There were no significant differences according to sex. The conclusion is that the autonomy andfunctional abilities of the Elderly are closely related to the frequency of physical activities and social integration, which promotes the quality of life of older people and hampering the emergence of significant biopsychosocial changes in this stage of life.

  4. Integral operators in non-standard function spaces

    CERN Document Server

    Kokilashvili, Vakhtang; Rafeiro, Humberto; Samko, Stefan

    2016-01-01

    This book, the result of the authors’ long and fruitful collaboration, focuses on integral operators in new, non-standard function spaces and presents a systematic study of the boundedness and compactness properties of basic, harmonic analysis integral operators in the following function spaces, among others: variable exponent Lebesgue and amalgam spaces, variable Hölder spaces, variable exponent Campanato, Morrey and Herz spaces, Iwaniec-Sbordone (grand Lebesgue) spaces, grand variable exponent Lebesgue spaces unifying the two spaces mentioned above, grand Morrey spaces, generalized grand Morrey spaces, and weighted analogues of some of them. The results obtained are widely applied to non-linear PDEs, singular integrals and PDO theory. One of the book’s most distinctive features is that the majority of the statements proved here are in the form of criteria. The book is intended for a broad audience, ranging from researchers in the area to experts in applied mathematics and prospective students.

  5. Functional integral approach to the kinetic theory of inhomogeneous systems

    Science.gov (United States)

    Fouvry, Jean-Baptiste; Chavanis, Pierre-Henri; Pichon, Christophe

    2016-10-01

    We present a derivation of the kinetic equation describing the secular evolution of spatially inhomogeneous systems with long-range interactions, the so-called inhomogeneous Landau equation, by relying on a functional integral formalism. We start from the BBGKY hierarchy derived from the Liouville equation. At the order 1 / N, where N is the number of particles, the evolution of the system is characterised by its 1-body distribution function and its 2-body correlation function. Introducing associated auxiliary fields, the evolution of these quantities may be rewritten as a traditional functional integral. By functionally integrating over the 2-body autocorrelation, one obtains a new constraint connecting the 1-body DF and the auxiliary fields. When inverted, this constraint allows us to obtain the closed non-linear kinetic equation satisfied by the 1-body distribution function. This derivation provides an alternative to previous methods, either based on the direct resolution of the truncated BBGKY hierarchy or on the Klimontovich equation. It may turn out to be fruitful to derive more accurate kinetic equations, e.g., accounting for collective effects, or higher order correlation terms.

  6. Method of folding a piecewise polynomial function in the delta function integral representation

    Energy Technology Data Exchange (ETDEWEB)

    Lee, D.K.

    1978-12-01

    A simple procedure is presented for determining the folded form of a piecewise polynomial function in the delta function integral representation. The procedure is useful in evaluating the autocorrelation function by means of the algebraic convolution technique developed by Polge and Hasy (IEEE Trans. Comput. pp. 970-975, Nov 1973).

  7. Subordination and superordination for certain analytic functions containing fractional integral

    Directory of Open Access Journals (Sweden)

    Shaher Momani

    2009-11-01

    Full Text Available The purpose of the present article is to derive some subordination and superordination results for certain normalized analytic functions involving fractional integral operator. Moreover, this result is applied to find a relation between univalent solutions for fractional differential equation.

  8. Invention software support by integrating function and mathematical modeling

    NARCIS (Netherlands)

    Chechurin, L.S.; Wits, Wessel Willems; Bakker, H.M.

    2015-01-01

    New idea generation is imperative for successful product innovation and technology development. This paper presents the development of a novel type of invention support software. The support tool integrates both function modeling and mathematical modeling, thereby enabling quantitative analyses on a

  9. Invention software support by integrating function and mathematical modeling

    NARCIS (Netherlands)

    Chechurin, L.S.; Wits, W.W.; Bakker, H.M.

    2015-01-01

    New idea generation is imperative for successful product innovation and technology development. This paper presents the development of a novel type of invention support software. The support tool integrates both function modeling and mathematical modeling, thereby enabling quantitative analyses on a

  10. Integrative pathway genomics of lung function and airflow obstruction

    NARCIS (Netherlands)

    Gharib, Sina A.; Loth, Daan W.; Artigas, Maria Soler; Birkland, Timothy P.; Wilk, Jemma B.; Wain, Louise V.; Brody, Jennifer A.; Obeidat, Ma'en; Hancock, Dana B.; Tang, Wenbo; Rawal, Rajesh; Boezen, H. Marike; Imboden, Medea; Huffman, Jennifer E.; Lahousse, Lies; Alves, Alexessander C.; Manichaikul, Ani; Hui, Jennie; Morrison, Alanna C.; Ramasamy, Adaikalavan; Smith, Albert Vernon; Gudnason, Vilmundur; Surakka, Ida; Vitart, Veronique; Evans, David M.; Strachan, David P.; Deary, Ian J.; Hofman, Albert; Glaeser, Sven; Wilson, James F.; North, Kari E.; Zhao, Jing Hua; Heckbert, Susan R.; Jarvis, Deborah L.; Probst-Hensch, Nicole; Schulz, Holger; Barr, R. Graham; Jarvelin, Marjo-Riitta; O'Connor, George T.; Kahonen, Mika; Cassano, Patricia A.; Hysi, Pirro G.; Dupuis, Josee; Hayward, Caroline; Psaty, Bruce M.; Hall, Ian P.; Parks, William C.; Tobin, Martin D.; London, Stephanie J.

    2015-01-01

    Chronic respiratory disorders are important contributors to the global burden of disease. Genome-wide association studies (GWASs) of lung function measures have identified several trait-associated loci, but explain only a modest portion of the phenotypic variability. We postulated that integrating p

  11. Nonadditive Set Functions Defined by Aumann Fuzzy Integrals

    Institute of Scientific and Technical Information of China (English)

    刘彦奎; 刘宝碇

    2003-01-01

    A novel concept, called nonadditive set-valued measure, is first defined as a monotone and continuous set function. Then the interconnections between nonadditive set-valued measure and the additive set-valued measure as well as the fuzzy measure are discussed. Finally, an approach to construct a nonadditive compact set-valued measure is presented via Aumann fuzzy integral.

  12. Dyspraxia, motor function and visual-motor integration in autism.

    Science.gov (United States)

    Miller, M; Chukoskie, L; Zinni, M; Townsend, J; Trauner, D

    2014-08-01

    This project assessed dyspraxia in high-functioning school aged children with autism with a focus on Ideational Praxis. We examined the association of specific underlying motor function including eye movement with ideational dyspraxia (sequences of skilled movements) as well as the possible role of visual-motor integration in dyspraxia. We found that compared to IQ-, sex- and age-matched typically developing children, the children with autism performed significantly worse on: Ideational and Buccofacial praxis; a broad range of motor tests, including measures of simple motor skill, timing and accuracy of saccadic eye movements and motor coordination; and tests of visual-motor integration. Impairments in individual children with autism were heterogeneous in nature, although when we examined the praxis data as a function of a qualitative measure representing motor timing, we found that children with poor motor timing performed worse on all praxis categories and had slower and less accurate eye movements while those with regular timing performed as well as typical children on those same tasks. Our data provide evidence that both motor function and visual-motor integration contribute to dyspraxia. We suggest that dyspraxia in autism involves cerebellar mechanisms of movement control and the integration of these mechanisms with cortical networks implicated in praxis.

  13. Functional Integrals and Collective Excitations in Boson-Fermion Model

    Institute of Scientific and Technical Information of China (English)

    YAN Jun

    2006-01-01

    In this paper, collective excitations in the boson-fermion model are investigated by means of functional integration method. The equations of energy gap and excitation spectrum are derived. Moreover, the Bose energy spectrum of zero wave vector Fermi fields is also calculated.

  14. Modularization, inter-functional integration and operational performance

    DEFF Research Database (Denmark)

    Boer, Henrike Engele Elisabeth; Boer, Harry

    2014-01-01

    for firms to indeed use product modularity beneficially, in particular inter-functional integration between manufacturing and purchasing, design and sales, respectively. The purpose of the paper is to investigate the direct performance effects of modularization, as well as the mediating effects of the three...

  15. Exact results for one dimensional fluids through functional integration

    CERN Document Server

    Fantoni, Riccardo

    2016-01-01

    We review some of the exactly solvable one dimensional continuum fluid models of equilibrium classical statistical mechanics under the unified setting of functional integration in one dimension. We make some further developments and remarks concerning fluids with penetrable particles. We then apply our developments to the study of the Gaussian core model for which we are unable to find a well defined thermodynamics.

  16. Ultrafast Photomodulation Spectroscopy: a device-level tool for characterizing the flow of light in integrated photonic circuits

    CERN Document Server

    Bruck, Roman; Thomson, David J; Gardes, Frederic Y; Hu, Youfang; Reed, Graham T; Muskens, Otto L

    2014-01-01

    Advances in silicon photonics have resulted in rapidly increasing complexity of integrated circuits. New methods are desirable that allow direct characterization of individual optical components in-situ, without the need for additional fabrication steps or test structures. Here, we present a new device-level method for characterization of photonic chips based on a highly localized modulation in the device using pulsed laser excitation. Optical pumping perturbs the refractive index of silicon, providing a spatially and temporally localized modulation in the transmitted light enabling time- and frequency-resolved imaging. We demonstrate the versatility of this all-optical modulation technique in imaging and in quantitative characterization of a variety of properties of silicon photonic devices, ranging from group indices in waveguides, quality factors of a ring resonator to the mode structure of a multimode interference device. Ultrafast photomodulation spectroscopy provides important information on devices of ...

  17. The integration of the risk management process with the lifecycle of medical device software.

    Science.gov (United States)

    Pecoraro, F; Luzi, D

    2014-01-01

    The application of software in the Medical Device (MD) domain has become central to the improvement of diagnoses and treatments. The new European regulations that specifically address software as an important component of MD, require complex procedures to make software compliant with safety requirements, introducing thereby new challenges in the qualification and classification of MD software as well as in the performance of risk management activities. Under this perspective, the aim of this paper is to propose an integrated framework that combines the activities to be carried out by the manufacturer to develop safe software within the development lifecycle based on the regulatory requirements reported in US and European regulations as well as in the relevant standards and guidelines. A comparative analysis was carried out to identify the main issues related to the application of the current new regulations. In addition, standards and guidelines recently released to harmonise procedures for the validation of MD software have been used to define the risk management activities to be carried out by the manufacturer during the software development process. This paper highlights the main issues related to the qualification and classification of MD software, providing an analysis of the different regulations applied in Europe and the US. A model that integrates the risk management process within the software development lifecycle has been proposed too. It is based on regulatory requirements and considers software risk analysis as a central input to be managed by the manufacturer already at the initial stages of the software design, in order to prevent MD failures. Relevant changes in the process of MD development have been introduced with the recognition of software being an important component of MDs as stated in regulations and standards. This implies the performance of highly iterative processes that have to integrate the risk management in the framework of software

  18. (DARPA) Optical Radiation Cooling and Heating In Integrated Devices: Circuit cavity optomechanics for cooling and amplification on a silicon chip

    Science.gov (United States)

    2015-07-16

    AFRL-AFOSR-VA-TR-2015-0241 DARPA ) OPTICAL RADIATION COOLING AND HEATING IN INTEGRATED DEVICES Hong Tang YALE UNIV NEW HAVEN CT Final Report 07/21... DARPA ) OPTICAL RADIATION COOLING AND HEATING IN INTEGRATED DEVICES 5a. CONTRACT NUMBER 5b. GRANT NUMBER FA9550-10-1-0297 5c. PROGRAM ELEMENT NUMBER...9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) DARPA ORCHID through AFOSR 10. SPONSOR/MONITOR’S ACRONYM(S) AFOSR 11. SPONSOR/MONITOR’S

  19. In Search of an Integrative Measure of Functioning

    Directory of Open Access Journals (Sweden)

    Rosamond H. Madden

    2015-05-01

    Full Text Available International trends towards people-centred, integrative care and support require any measurement of functioning and disability to meet multiple aims. The information requirements of two major Australian programs for disability and rehabilitation are outlined, and the findings of two searches for suitable measures of functioning and disability are analysed. Over 30 current measures of functioning were evaluated in each search. Neither search found a generic measure of functioning suitable for these multibillion dollar programs, relevant to a wide range of people with a variety of health conditions and functioning experiences, and capable of indicating support needs, associated costs, progress and outcomes. This unsuccessful outcome has implications internationally for policy-relevant information for disability, rehabilitation and related programs. The paper outlines the features of an Integrative Measure of Functioning (IMF based on the concepts of functioning and environmental factors in the International Classification of Functioning, Disability and Health (ICF. An IMF would be applicable across a variety of health conditions, settings and purposes, ranging from individual assessment to public health. An IMF could deliver person-centred, policy-relevant information for a range of programs, promoting harmonised language and measurement and supporting international trends in human services and public health.

  20. The modular and integrative functional architecture of the human brain.

    Science.gov (United States)

    Bertolero, Maxwell A; Yeo, B T Thomas; D'Esposito, Mark

    2015-12-01

    Network-based analyses of brain imaging data consistently reveal distinct modules and connector nodes with diverse global connectivity across the modules. How discrete the functions of modules are, how dependent the computational load of each module is to the other modules' processing, and what the precise role of connector nodes is for between-module communication remains underspecified. Here, we use a network model of the brain derived from resting-state functional MRI (rs-fMRI) data and investigate the modular functional architecture of the human brain by analyzing activity at different types of nodes in the network across 9,208 experiments of 77 cognitive tasks in the BrainMap database. Using an author-topic model of cognitive functions, we find a strong spatial correspondence between the cognitive functions and the network's modules, suggesting that each module performs a discrete cognitive function. Crucially, activity at local nodes within the modules does not increase in tasks that require more cognitive functions, demonstrating the autonomy of modules' functions. However, connector nodes do exhibit increased activity when more cognitive functions are engaged in a task. Moreover, connector nodes are located where brain activity is associated with many different cognitive functions. Connector nodes potentially play a role in between-module communication that maintains the modular function of the brain. Together, these findings provide a network account of the brain's modular yet integrated implementation of cognitive functions.

  1. Polymer functionalized n-type single wall carbon nanotube photovoltaic devices

    Science.gov (United States)

    Li, Zhongrui; Saini, Viney; Dervishi, Enkeleda; Kunets, Vasyl P.; Zhang, Jianhui; Xu, Yang; Biris, Alexandru R.; Salamo, Gregory J.; Biris, Alexandru S.

    2010-01-01

    Photovoltaic conversion was achieved from high-density p-n heterojunctions formed between polymer functionalized n-type single wall carbon nanotubes (SWNTs) and underlying p-type Si substrate. Functionalization of SWNTs by amine-rich polymers results in the evolution of tubes from p-type to n-type, and the polyethylene imine (PEI) functionalized SWNT film can serve as both photogeneration sites and a charge carrier collecting/transport layer. Photoremoval of oxygen adsorbed on the nanotubes prior to PEI functionalization can increase the conversion efficiency of the polymer functionalized n-type SWNT photovoltaic devices.

  2. Integration of macromolecular diffraction data using radial basis function networks.

    Science.gov (United States)

    Pokrić, B; Allinson, N M; Helliwell, J R

    2000-11-01

    This paper presents a novel approach for intensity calculation of X-ray diffraction spots based on a two-stage radial basis function (RBF) network. The first stage uses pre-determined reference profiles from a database as basis functions in order to locate the diffraction spots and identify any overlapping regions. The second-stage RBF network employs narrow basis functions capable of local modifications of the reference profiles leading to a more accurate observed diffraction spot approximation and therefore accurate determination of spot positions and integrated intensities.

  3. Function-based integration strategy for an agile manufacturing testbed

    Science.gov (United States)

    Park, Hisup

    1997-01-01

    This paper describes an integration strategy for plug-and- play software based on functional descriptions of the software modules. The functional descriptions identify explicitly the role of each module with respect to the overall systems. They define the critical dependencies that affect the individual modules and thus affect the behavior of the system. The specified roles, dependencies and behavioral constraints are then incorporated in a group of shared objects that are distributed over a network. These objects may be interchanged with others without disrupting the system so long as the replacements meet the interface and functional requirements. In this paper, we propose a framework for modeling the behavior of plug-and-play software modules that will be used to (1) design and predict the outcome of the integration, (2) generate the interface and functional requirements of individual modules, and (3) form a dynamic foundation for applying interchangeable software modules. I describe this strategy in the context of the development of an agile manufacturing testbed. The testbed represents a collection of production cells for machining operations, supported by a network of software modules or agents for planning, fabrication, and inspection. A process definition layer holds the functional description of the software modules. A network of distributed objects interact with one another over the Internet and comprise the plug-compatible software nodes that execute these functions. This paper will explore the technical and operational ramifications of using the functional description framework to organize and coordinate the distributed object modules.

  4. Digital cell counting device integrated with a single-cell array.

    Directory of Open Access Journals (Sweden)

    Tatsuya Saeki

    Full Text Available In this paper, we present a novel cell counting method accomplished using a single-cell array fabricated on an image sensor, complementary metal oxide semiconductor sensor. The single-cell array was constructed using a microcavity array, which can trap up to 7,500 single cells on microcavities periodically arranged on a plane metallic substrate via the application of a negative pressure. The proposed method for cell counting is based on shadow imaging, which uses a light diffraction pattern generated by the microcavity array and trapped cells. Under illumination, the cell-occupied microcavities are visualized as shadow patterns in an image recorded by the complementary metal oxide semiconductor sensor due to light attenuation. The cell count is determined by enumerating the uniform shadow patterns created from one-on-one relationships with single cells trapped on the microcavities in digital format. In the experiment, all cell counting processes including entrapment of non-labeled HeLa cells from suspensions on the array and image acquisition of a wide-field-of-view of 30 mm(2 in 1/60 seconds were implemented in a single integrated device. As a result, the results from the digital cell counting had a linear relationship with those obtained from microscopic observation (r(2  = 0.99. This platform could be used at extremely low cell concentrations, i.e., 25-15,000 cells/mL. Our proposed system provides a simple and rapid miniaturized cell counting device for routine laboratory use.

  5. Integrating protection and control data and functions in Ontario Hydro substations

    Energy Technology Data Exchange (ETDEWEB)

    Whatley, J.A.; Kwan, J.S.K. [Ontario Hydro, Toronto, ON (Canada)

    1998-12-01

    The basic requirements and desirable features of protection and control system integration which meet the needs of Ontario Hydro are described, and technical functional requirements for protection and control systems and data gathering are categorized. The introduction of intelligent electronic devices (IEDs) with communications capability offer new possibilities for substations, but also present new problems, including the creation of islands with massive amounts of data and limitations in sharing of data between devices due to incompatible formats. Ontario Hydro`s experience in the evolution of protection and control technology and the Utility`s continuing participation in significant industry efforts to develop practical substation local area network (LAN) technology are also discussed. LAN technology can provide the communications infrastructure to change the way in which utilities operate and maintain their assets. Nevertheless, translating existing requirements, safe practices and beneficial proven aspects of system design into the new LAN technology continues to pose significant challenges. 2 figs.

  6. An accurate and efficient method for piezoelectric coated functional devices based on the two-dimensional Green’s function for a normal line force and line charge

    Science.gov (United States)

    Hou, Peng-Fei; Zhang, Yang

    2017-09-01

    Because most piezoelectric functional devices, including sensors, actuators and energy harvesters, are in the form of a piezoelectric coated structure, it is valuable to present an accurate and efficient method for obtaining the electro-mechanical coupling fields of this coated structure under mechanical and electrical loads. With this aim, the two-dimensional Green’s function for a normal line force and line charge on the surface of coated structure, which is a combination of an orthotropic piezoelectric coating and orthotropic elastic substrate, is presented in the form of elementary functions based on the general solution method. The corresponding electro-mechanical coupling fields of this coated structure under arbitrary mechanical and electrical loads can then be obtained by the superposition principle and Gauss integration. Numerical results show that the presented method has high computational precision, efficiency and stability. It can be used to design the best coating thickness in functional devices, improve the sensitivity of sensors, and improve the efficiency of actuators and energy harvesters. This method could be an efficient tool for engineers in engineering applications.

  7. Predictive functional control of integrating process based on impulse response

    Institute of Scientific and Technical Information of China (English)

    Bin ZHANG; Ping LI; Weidong ZHANG

    2004-01-01

    The predictive model is built according to the characteristics of the impulse response of integrating process. In order to eliminate the permanent offset between the setpoint and the process output in the presence of the load disturbance, a novel error compensation method is proposed. Then predictive functional control of integrating process is designed. The method given generates a simple control structure, which can significantly reduce online computation. Furthermore, the tuning of the controller is fairly straightforward. Simulation results indicate that the designed control system is relatively robust to the parameters variation of the process.

  8. Integrated Electrochemical Analysis System with Microfluidic and Sensing Functions

    Directory of Open Access Journals (Sweden)

    Hiroaki Suzuki

    2008-02-01

    Full Text Available An integrated device that carries out the timely transport of solutions andconducts electroanalysis was constructed. The transport of solutions was based oncapillary action in overall hydrophilic flow channels and control by valves that operateon the basis of electrowetting. Electrochemical sensors including glucose, lactate,glutamic oxaloacetic transaminase (GOT, glutamic pyruvic transaminase (GPT, pH,ammonia, urea, and creatinine were integrated. An air gap structure was used for theammonia, urea, and creatinine sensors to realize a rapid response. To enhance thetransport of ammonia that existed or was produced by the enzymatic reactions, the pHof the solution was elevated by mixing it with a NaOH solution using a valve based onelectrowetting. The sensors for GOT and GPT used a freeze-dried substrate matrix torealize rapid mixing. The sample solution was transported to required sensing sites atdesired times. The integrated sensors showed distinct responses when a sample solutionreached the respective sensing sites. Linear relationships were observed between theoutput signals and the concentration or the logarithm of the concentration of theanalytes. An interferent, L-ascorbic acid, could be eliminated electrochemically in thesample injection port.

  9. Realization of Minimum and Maximum Gate Function in Ta2O5-based Memristive Devices

    Science.gov (United States)

    Breuer, Thomas; Nielen, Lutz; Roesgen, Bernd; Waser, Rainer; Rana, Vikas; Linn, Eike

    2016-04-01

    Redox-based resistive switching devices (ReRAM) are considered key enablers for future non-volatile memory and logic applications. Functionally enhanced ReRAM devices could enable new hardware concepts, e.g. logic-in-memory or neuromorphic applications. In this work, we demonstrate the implementation of ReRAM-based fuzzy logic gates using Ta2O5 devices to enable analogous Minimum and Maximum operations. The realized gates consist of two anti-serially connected ReRAM cells offering two inputs and one output. The cells offer an endurance up to 106 cycles. By means of exemplary input signals, each gate functionality is verified and signal constraints are highlighted. This realization could improve the efficiency of analogous processing tasks such as sorting networks in the future.

  10. Hybrid integration of III-V and silicon materials and devices

    Science.gov (United States)

    Luo, Zhongsheng

    Laser liftoff (LLO) based hybrid integration techniques including the double-transfer process and the pixel-to-point transfer process have been developed to integrate III-V photonics with silicon materials and circuitry. No degradation in the device performance has been observed using the LLO based transfer techniques. On the contrary, performance improvements in both electrical characteristics and electroluminescence (EL) output have been found for the (In,Ga)N light emitting diodes (LEDs) transferred onto Si substrate. Based on computer simulation, it is found that as much as 70% enhancement in EL output could be expected by optimizing the metal layering on the backside of the transferred LEDs. In order to understand the existing experimental data and improve controllability and damage-free transfer yield of the LLO process, a novel, comprehensive LLO model based on thermal-mechanical analysis has been proposed and developed. The LLO model has been validated in the well-studied GaN/sapphire system. By employing the LLO based transfer technique, two optoelectronic systems have been designed and demonstrated. The first one is an integrated fluorescence microsystem, which involved the integration of Cd(S,Se) bandgap filters, (In,Ga)N LEDs, Poly(dimethylsiloxane) (PDMS) microfluidic channels with a pre-fabricated Si PIN photodiode chip. Prototypes with both one color (blue LED) excitation and two-color (blue and green LED) excitation have consistently demonstrated a detection capability of as low as 1 nM fluosphere beads using Molecular Probes FluoSpheresRTM dye. Furthermore, the feasibility of multi-wavelength design has been verified using the bi-wavelength prototype. To optimize signal-to-noise ratio and detection sensitivity of the microsystem via system design, an in-depth mathematic analysis has also been performed. The second application is a zero-footprint optical metrology wafer, which relies on the reflection at the optical detection window, through which

  11. A simple and cost-effective method for fabrication of integrated electronic-microfluidic devices using a laser-patterned PDMS layer

    KAUST Repository

    Li, Ming

    2011-12-03

    We report a simple and cost-effective method for fabricating integrated electronic-microfluidic devices with multilayer configurations. A CO 2 laser plotter was employed to directly write patterns on a transferred polydimethylsiloxane (PDMS) layer, which served as both a bonding and a working layer. The integration of electronics in microfluidic devices was achieved by an alignment bonding of top and bottom electrode-patterned substrates fabricated with conventional lithography, sputtering and lift-off techniques. Processes of the developed fabrication method were illustrated. Major issues associated with this method as PDMS surface treatment and characterization, thickness-control of the transferred PDMS layer, and laser parameters optimization were discussed, along with the examination and testing of bonding with two representative materials (glass and silicon). The capability of this method was further demonstrated by fabricating a microfluidic chip with sputter-coated electrodes on the top and bottom substrates. The device functioning as a microparticle focusing and trapping chip was experimentally verified. It is confirmed that the proposed method has many advantages, including simple and fast fabrication process, low cost, easy integration of electronics, strong bonding strength, chemical and biological compatibility, etc. © Springer-Verlag 2011.

  12. Tribo-Mechanical Investigation of the Functional Components used in Flexible Energy Harvesting Devices

    Science.gov (United States)

    Morris, Nicholas J.

    During the previous decade, the development of energy harvesting devices based on piezoelectric materials has garnered great interest. The ability to capture ambient mechanical energy and convert it to useable electricity is a potential solution to the ever-growing energy crisis. One of the most attractive functional materials used in these devices is zinc oxide (ZnO). This material's relative low cost and ease of large-area processing has spurred numerous device designs based around it. The ability to grow ZnO nanostructures of various geometries with low-temperature chemical methods makes this material even more attractive for flexible devices. Although numerous device architectures have been developed, the long-term mechanical reliability has not been addressed. This work focuses on the fabrication and mechanical failure analysis of the flexible components typically used in piezoelectric energy harvesting devices. A three-phase iterative design process was used to fabricate prototypical piezoelectric nanogenerators, based on ZnO nanowires. An output of several millivolts was achieved under normal contact and microtensile loading, but device failure occurred after only a few loading cycles, in all cases. Ex situ failure analysis confirmed the primary sources of failure, which became the focus of further, component-level studies. Failure was primarily seen in the flexible electrodes of the nanogenerating devices, but was also observed in the functional piezoelectric layer itself. Flexible electrodes comprised of polyester substrates with transparent conductive oxide (TCO) coatings were extensively investigated under various loading scenarios to mimic tribo-mechanical stresses applied during fabrication and use in flexible contact-based devices. The durability of these films was explored using microtensile testing, spherical nanoindentation, controlled mechanical buckling, stress corrosion cracking, and shear-contact reciprocating wear. The electro

  13. The non-equilibrium Green's function method for nanoscale device simulation

    CERN Document Server

    Pourfath, Mahdi

    2014-01-01

    For modeling the transport of carriers in nanoscale devices, a Green-function formalism is the most accurate approach. Due to the complexity of the formalism, one should have a deep understanding of the underlying principles and use smart approximations and numerical methods for solving the kinetic equations at a reasonable computational time. In this book the required concepts from quantum and statistical mechanics and numerical methods for calculating Green functions are presented. The Green function is studied in detail for systems both under equilibrium and under nonequilibrium conditions. Because the formalism enables rigorous modeling of different scattering mechanisms in terms of self-energies, but an exact evaluation of self-energies for realistic systems is not possible, their approximation and inclusion in the quantum kinetic equations of the Green functions are elaborated. All the elements of the kinetic equations, which are the device Hamiltonian, contact self-energies, and scattering self-energie...

  14. Painlevé equations, elliptic integrals and elementary functions

    Science.gov (United States)

    Żołądek, Henryk; Filipuk, Galina

    2015-02-01

    The six Painlevé equations can be written in the Hamiltonian form, with time dependent Hamilton functions. We present a rather new approach to this result, leading to rational Hamilton functions. By a natural extension of the phase space one gets corresponding autonomous Hamiltonian systems with two degrees of freedom. We realize the Bäcklund transformations of the Painlevé equations as symplectic birational transformations in C4 and we interpret the cases with classical solutions as the cases of partial integrability of the extended Hamiltonian systems. We prove that the extended Hamiltonian systems do not have any additional algebraic first integral besides the known special cases of the third and fifth Painlevé equations. We also show that the original Painlevé equations admit the first integrals expressed in terms of the elementary functions only in the special cases mentioned above. In the proofs we use equations in variations with respect to a parameter and Liouville's theory of elementary functions.

  15. Lectures on functional analysis and the Lebesgue integral

    CERN Document Server

    Komornik, Vilmos

    2016-01-01

    This textbook, based on three series of lectures held by the author at the University of Strasbourg, presents functional analysis in a non-traditional way by generalizing elementary theorems of plane geometry to spaces of arbitrary dimension. This approach leads naturally to the basic notions and theorems. Most results are illustrated by the small ℓp spaces. The Lebesgue integral, meanwhile, is treated via the direct approach of Frigyes Riesz, whose constructive definition of measurable functions leads to optimal, clear-cut versions of the classical theorems of Fubini-Tonelli and Radon-Nikodým. Lectures on Functional Analysis and the Lebesgue Integral presents the most important topics for students, with short, elegant proofs. The exposition style follows the Hungarian mathematical tradition of Paul Erdős and others. The order of the first two parts, functional analysis and the Lebesgue integral, may be reversed. In the third and final part they are combined to study various spaces of continuous and integ...

  16. Many-electron integrals over gaussian basis functions. I. Recurrence relations for three-electron integrals

    CERN Document Server

    Barca, Giuseppe M J; Gill, Peter M W

    2016-01-01

    Explicitly-correlated F12 methods are becoming the first choice for high-accuracy molecular orbital calculations, and can often achieve chemical accuracy with relatively small gaussian basis sets. In most calculations, the many three- and four-electron integrals that formally appear in the theory are avoided through judicious use of resolutions of the identity (RI). However, in order not to jeopardize the intrinsic accuracy of the F12 wave function, the associated RI auxiliary basis set must be large. Here, inspired by the Head-Gordon-Pople (HGP) and PRISM algorithms for two-electron integrals, we present an algorithm to compute directly three-electron integrals over gaussian basis functions and a very general class of three-electron operators, without invoking RI approximations. A general methodology to derive vertical, transfer and horizontal recurrence relations is also presented.

  17. Integrating anatomy and function for zebrafish circuit analysis.

    Science.gov (United States)

    Arrenberg, Aristides B; Driever, Wolfgang

    2013-01-01

    Due to its transparency, virtually every brain structure of the larval zebrafish is accessible to light-based interrogation of circuit function. Advanced stimulation techniques allow the activation of optogenetic actuators at different resolution levels, and genetically encoded calcium indicators report the activity of a large proportion of neurons in the CNS. Large datasets result and need to be analyzed to identify cells that have specific properties-e.g., activity correlation to sensory stimulation or behavior. Advances in three-dimensional (3D) functional mapping in zebrafish are promising; however, the mere coordinates of implicated neurons are not sufficient. To comprehensively understand circuit function, these functional maps need to be placed into the proper context of morphological features and projection patterns, neurotransmitter phenotypes, and key anatomical landmarks. We discuss the prospect of merging functional and anatomical data in an integrated atlas from the perspective of our work on long-range dopaminergic neuromodulation and the oculomotor system. We propose that such a resource would help researchers to surpass current hurdles in circuit analysis to achieve an integrated understanding of anatomy and function.

  18. TRACTABILITY OF MULTIVARIATE INTEGRATION PROBLEM FOR PERIODIC CONTINUOUS FUNCTIONS

    Institute of Scientific and Technical Information of China (English)

    Fang Gensun; Long Jingfan

    2007-01-01

    The authors study the tractability and strong tractability of a multivariate integration problem in the worst case setting for weighted 1-periodic continuous functions spaces of d coordinates with absolutely convergent Fourier series. The authors reduce the initial error by a factor ε for functions from the unit ball of the weighted periodic continuous functions spaces. Tractability is the minimal number of function samples required to solve the problem in polynomial in ε-1 and d, and the strong tractability is the presence of only a polynomial dependence in ε-1. This problem has been recently studied for quasi-Monte Carlo quadrature rules, quadrature rules with non-negative coefficients,and rules for which all quadrature weights are arbitrary for weighted Korobov spaces of smooth periodic functions of d variables. The authors show that the tractability and strong tractability of a multivariate integration problem in worst case setting hold for the weighted periodic continuous functions spaces with absolutely convergent Fourier series under the same assumptions as in Ref. [14] on the weights of the Korobov space for quasi-Monte Carlo rules and rules for which all quadrature weights are non-negative. The arguments are not constructive.

  19. Accelerometer Method and Apparatus for Integral Display and Control Functions

    Science.gov (United States)

    Bozeman, Richard J., Jr. (Inventor)

    1998-01-01

    Method and apparatus for detecting mechanical vibrations and outputting a signal in response thereto is discussed. An accelerometer package having integral display and control functions is suitable for mounting upon the machinery to be monitored. Display circuitry provides signals to a bar graph display which may be used to monitor machine conditions over a period of time. Control switches may be set which correspond to elements in the bar graph to provide an alert if vibration signals increase in amplitude over a selected trip point. The circuitry is shock mounted within the accelerometer housing. The method provides for outputting a broadband analog accelerometer signal, integrating this signal to produce a velocity signal, integrating and calibrating the velocity signal before application to a display driver, and selecting a trip point at which a digitally compatible output signal is generated.

  20. On holographic three point functions for GKP strings from integrability

    CERN Document Server

    Kazama, Yoichi

    2011-01-01

    Adapting the powerful integrability-based formalism invented previously for the calculation of gluon scattering amplitudes at strong coupling, we develop a method for computing the holographic three point functions for the large spin limit of Gubser-Klebanov- Polyakov (GKP) strings. Although many of the ideas from the gluon scattering problem can be transplanted with minor modifications, the fact that the information of the external states is now encoded in the singularities at the vertex insertion points necessitates several new techniques. Notably, we develop a new generalized Riemann bilinear identity, which allows one to express the area integral in terms of appropriate contour integrals in the presence of such singularities. We also give some general discussions on how semiclassical vertex operators for heavy string states should be constructed systematically from the solutions of the Hamilton-Jacobi equation.

  1. A Parallel Discrete Surface Integral Equation Method For the Analysis of Three-Dimensional Microwave Circuit Devices with Planar Symmetry

    Science.gov (United States)

    Gedney, Stephen D.; Lansing, Faiza

    1994-01-01

    It has been found that the Discrete Integral Equation (DSI)technique is a highly effective technique for the analysis of microwave circuits and devices [1,2]. The DSI is much more robust than the traditional Finite Difference Time Domain (FDTD) method in a number of ways.

  2. Teachers Exploring Mobile Device Integration: A Case Study of Secondary Teachers' Responses to iPads in the Classroom

    Science.gov (United States)

    Erbes, Stella; Lesky, Steven; Myers, Joshua

    2016-01-01

    This qualitative study seeks to understand and resolve the difficulties that teachers encounter when integrating mobile devices in classrooms. To address the issue of teacher receptiveness, three undergraduate researchers collaborated with an education professor in spring 2012 to complete a qualitative study with a two-fold purpose: 1) to…

  3. Integrating QoS and security functions in an IP-VPN gateway

    Science.gov (United States)

    Fan, Kuo-Pao; Chang, Shu-Hsin; Lin, Kuan-Ming; Pen, Mau-Jy

    2001-10-01

    IP-based Virtual Private Network becomes more and more popular. It can not only reduce the enterprise communication cost but also increase the revenue of the service provider. The common IP-VPN application types include Intranet VPN, Extranet VPN, and remote access VPN. For the large IP-VPN market, some vendors develop dedicated IP-VPN devices; while some vendors add the VPN functions into their existing network equipment such as router, access gateway, etc. The functions in the IP-VPN device include security, QoS, and management. The common security functions supported are IPSec (IP Security), IKE (Internet Key Exchange), and Firewall. The QoS functions include bandwidth control and packet scheduling. In the management component, policy-based network management is under standardization in IETF. In this paper, we discuss issues on how to integrate the QoS and security functions in an IP-VPN Gateway. We propose three approaches to do this. They are (1) perform Qos first (2) perform IPSec first and (3) reserve fixed bandwidth for IPSec. We also compare the advantages and disadvantages of the three proposed approaches.

  4. An image compression method for space multispectral time delay and integration charge coupled device camera

    Institute of Scientific and Technical Information of China (English)

    Li Jin; Jin Long-Xu; Zhang Ran-Feng

    2013-01-01

    Multispectral time delay and integration charge coupled device (TDICCD) image compression requires a lowcomplexity encoder because it is usually completed on board where the energy and memory are limited.The Consultative Committee for Space Data Systems (CCSDS) has proposed an image data compression (CCSDS-IDC) algorithm which is so far most widely implemented in hardware.However,it cannot reduce spectral redundancy in multispectral images.In this paper,we propose a low-complexity improved CCSDS-IDC (ICCSDS-IDC)-based distributed source coding (DSC) scheme for multispectral TDICCD image consisting of a few bands.Our scheme is based on an ICCSDS-IDC approach that uses a bit plane extractor to parse the differences in the original image and its wavelet transformed coefficient.The output of bit plane extractor will be encoded by a first order entropy coder.Low-density parity-check-based Slepian-Wolf (SW) coder is adopted to implement the DSC strategy.Experimental results on space multispectral TDICCD images show that the proposed scheme significantly outperforms the CCSDS-IDC-based coder in each band.

  5. Integrated Multi-Color Light Emitting Device Made with Hybrid Crystal Structure

    Science.gov (United States)

    Park, Yeonjoon (Inventor); Choi, Sang Hyouk (Inventor)

    2016-01-01

    An integrated hybrid crystal Light Emitting Diode ("LED") display device that may emit red, green, and blue colors on a single wafer. The various embodiments may provide double-sided hetero crystal growth with hexagonal wurtzite III-Nitride compound semiconductor on one side of (0001) c-plane sapphire media and cubic zinc-blended III-V or II-VI compound semiconductor on the opposite side of c-plane sapphire media. The c-plane sapphire media may be a bulk single crystalline c-plane sapphire wafer, a thin free standing c-plane sapphire layer, or crack-and-bonded c-plane sapphire layer on any substrate. The bandgap energies and lattice constants of the compound semiconductor alloys may be changed by mixing different amounts of ingredients of the same group into the compound semiconductor. The bandgap energy and lattice constant may be engineered by changing the alloy composition within the cubic group IV, group III-V, and group II-VI semiconductors and within the hexagonal III-Nitrides.

  6. Integrated Multi-Color Light Emitting Device Made with Hybrid Crystal Structure

    Science.gov (United States)

    Park, Yeonjoon (Inventor); Choi, Sang Hyouk (Inventor)

    2017-01-01

    An integrated hybrid crystal Light Emitting Diode ("LED") display device that may emit red, green, and blue colors on a single wafer. The various embodiments may provide double-sided hetero crystal growth with hexagonal wurtzite III-Nitride compound semiconductor on one side of (0001) c-plane sapphire media and cubic zinc-blended III-V or II-VI compound semiconductor on the opposite side of c-plane sapphire media. The c-plane sapphire media may be a bulk single crystalline c-plane sapphire wafer, a thin free standing c-plane sapphire layer, or crack-and-bonded c-plane sapphire layer on any substrate. The bandgap energies and lattice constants of the compound semiconductor alloys may be changed by mixing different amounts of ingredients of the same group into the compound semiconductor. The bandgap energy and lattice constant may be engineered by changing the alloy composition within the cubic group IV, group III-V, and group II-VI semiconductors and within the hexagonal III-Nitrides.

  7. Developing high mobility emissive organic semiconductors towards integrated optoelectronic devices (Conference Presentation)

    Science.gov (United States)

    Dong, Huanli; Hu, Wenping; Heeger, Alan J.

    2016-09-01

    The achievement of organic semiconductors with both high mobility and strong fluorescence emission remains a challenge. High mobility requires molecules which pack densely and periodically, while serious fluorescence quenching typically occurs when fluorescent materials begin to aggregate (aggregation-induced quenching (AIQ)). Indeed, classical materials with strong fluorescent emission always exhibit low mobility, for example, tris(8-hydroxyquinoline) aluminium (ALQ) and phenylenevinylene-based polymers with mobility only 10-6-10-5 cm2V-1s-1, and benchmark organic semiconductors with high mobility demonstrate very weak emission, for example, rubrene exhibits a quantum yield 1% in crystalline state and pentacene shows very weak fluorescence in the solid state. However, organic semiconductors with high mobility and strong fluorescence are necessary for the achievement of high efficiency organic light-emitting transistors (OLETs) and electrically pumped organic lasers. Therefore, it is necessary for developing high mobility emissive organic/polymeric semiconductors towards a fast mover for the organic optoelectronic integrated devices and circuits.

  8. Reactive actuators and sensors integrated in one device: mimicking brain-muscles feedback communication

    Science.gov (United States)

    Otero, Toribio F.; Martinez, Jose G.

    2013-04-01

    Artificial muscles based on carbon derivative molecular structures are chemical (electro-chemo-mechanical) actuators. The electrochemical reaction drives the film volume variation and the actuation. The applied current controls the movement rate and the charge controls the amplitude of the displacement (Faraday' motors). Any working or surrounding variable influencing the reaction rate will be sensed by the muscle potential, or by the consumed electrical energy, evolution during actuation. Experimental results and full theoretical description of the basic reactive material and of any dual electrochemical sensing-actuator will be presented. During current flow the muscle potential and the consumed electrical energy evolution are influenced by the working variables: temperature, electrolyte concentration, driving current, film volume variation (external pressure, applied strain, hanged masses, obstacles in its way). The working muscle becomes an electrochemical sensor. Only two connecting wires contain actuating (current) and sensing (potential) signals read and controlled, at any time from the computer-generator. One device integrates several sensing and actuating tools working simultaneously mimicking muscles/brain feedback communication.

  9. Spectral interferometric sensors for gases and liquids using integrated optical devices

    Science.gov (United States)

    Ingenhoff, Jan; Gauglitz, Guenter; Fabricius, Norbert

    1993-04-01

    Investigations for a sensor application with an integrated optical (IO) interferometric arrangement are presented. One of the two waveguide arms of an IO-Mach-Zehnder- interferometer is covered with a thin layer of polysiloxane (superstrate), which is sensitive to hydrocarbons. The dielectric IO-devices are fabricated by IOT. Gases of organic compounds including halogenated and non-halogenated hydrocarbons cause a change of the polysiloxan's refractive index followed by an increase or decrease of the effective refractive index of the covered waveguide arm. The resulting phase shift between the guided light in the measuring and the reference arm depends on the detection wavelength and the concentration of gas. Using an LED as the light source the spectral interferogram becomes observable and so order and phase of the signal can be determined. The aim of this work is the development of a reversibly working, miniaturized sensor with a short response time. The advantages of spectral observation of the interference are discussed. A comparison between measured and calculated spectral interference signals is given.

  10. Regularity for Minimizers to Anisotropic Integrals Functions with Nonstandard Growth

    Directory of Open Access Journals (Sweden)

    Miaomiao JIA

    2016-05-01

    Full Text Available In this paper we deal with the problem $$ u\\in C_{\\psi}(\\Omega, $$ $$ \\forall \\ \\omega\\in C_{\\psi}(\\Omega, \\ \\ \\int_\\Omega f(x,Dudx\\leq \\int_\\Omega f(x,D\\omegadx, $$ where $C_{\\psi}(\\Omega=\\{w\\in u_*+W_0^{1,(p_i}(\\Omega\\ such \\ that \\ x\\rightarrow f(x,Dw\\in L^1(\\Omega, \\ w\\geq\\psi, \\ a.e. \\ \\Omega\\}.$ We consider a minimizer $u:\\ \\Omega\\subset R^n\\rightarrow R$ among all functions that agree on the boundary $\\partial\\Omega$ with some fixed boundary value $u_*$. And we assume that the function $\\theta=max\\{u_*,\\psi\\}$ makes the density $f(x,Du$ more integrable under the obstacle problem and we prove that the minimizer $u$ enjoy higher integrability.

  11. Silicon Photodetectors Matrix Coordinate Bipolar Functionally Integrated Structures

    Directory of Open Access Journals (Sweden)

    V.N. Murashev

    2015-03-01

    Full Text Available In this paper a new approach for solving the detection and coordinate the detection of radiation in the optical range of 0.3-1.1 microns, based on the use of so-called bipolar functionally integrated structures (BI-FIS in pixels photodetector arrays is discussed. Variants of new technical solutions based on photo-detectors matrix pixel BI-FIS structures are shown. Their effectiveness and scope are evaluated.

  12. MicrobesOnline: an integrated portal for comparative functional genomics

    OpenAIRE

    Joachimiak, Marcin P.

    2014-01-01

    The Virtual Institute for Microbial Stress and Survival (VIMSS, http://vimss.lbl.gov/) funded by the Dept. of Energy's Genomics:GTL Program, is dedicated to using integrated environmental, functional genomic, and comparative sequence and phylogeny data to understand mechanisms by which microbes and microbial communities survive in uncertain environments while carrying out processes of interest for bioremediation and energy generation. To support this work, VIMSS has developed a Web portal, al...

  13. Design, Fabrication, Characterization and Modeling of Integrated Functional Materials

    Science.gov (United States)

    2012-10-01

    purpose of this project is to develop the novel science base both in the areas of multi-scale dimensional integration as well as multiple functional...iron oxide nanoparticles have been widely explored because of their potential applications in various fields, including storage media, environmental... Wold , J. Solid State Chem. 1972, 5, 136. 44. A. A. Gippius, K.S. Okhotnikov, M. Baeritz, A. V. Shevelkov, Solid State Phenomena 2009, 152, 287. 45. C

  14. Spaceability and algebrability of sets of nowhere integrable functions

    OpenAIRE

    Glab, Szymon; Kaufmann, Pedro L.; Pellegrini, Leonardo

    2012-01-01

    We show that the set of Lebesgue integrable functions in $[0,1]$ which are nowhere essentially bounded is spaceable, improving a result from [F. J. Garc\\'{i}a-Pacheco, M. Mart\\'{i}n, and J. B. Seoane-Sep\\'ulveda. \\textit{Lineability, spaceability, and algebrability of certain subsets of function spaces,} Taiwanese J. Math., \\textbf{13} (2009), no. 4, 1257--1269], and that it is strongly $\\mathfrak{c}$-algebrable. We prove strong $\\mathfrak{c}$-algebrability and non-separable spaceability of t...

  15. ZERO SET OF SOBOLEV FUNCTIONS WITH NEGATIVE POWER OF INTEGRABILITY

    Institute of Scientific and Technical Information of China (English)

    姜惠强; 林芳华

    2004-01-01

    Here the authors are interested in the zero set of Sobolev functions and functions of bounded variation with negative power of integrability. The main result is a general Hausdorff dimension estimate on the size of zero set. The research is motivated by the model on van der waal force driven thin film, which is a singular elliptic equation.After obtaining some basic regularity result, the authors get an estimate on the size of singular set; such set corresponds to the thin film rupture set in the thin film model.

  16. Stochastic integration by parts and functional Itô calculus

    CERN Document Server

    Vives, Josep

    2016-01-01

    This volume contains lecture notes from the courses given by Vlad Bally and Rama Cont at the Barcelona Summer School on Stochastic Analysis (July 2012). The notes of the course by Vlad Bally, co-authored with Lucia Caramellino, develop integration by parts formulas in an abstract setting, extending Malliavin's work on abstract Wiener spaces. The results are applied to prove absolute continuity and regularity results of the density for a broad class of random processes. Rama Cont's notes provide an introduction to the Functional Itô Calculus, a non-anticipative functional calculus that extends the classical Itô calculus to path-dependent functionals of stochastic processes. This calculus leads to a new class of path-dependent partial differential equations, termed Functional Kolmogorov Equations, which arise in the study of martingales and forward-backward stochastic differential equations. This book will appeal to both young and senior researchers in probability and stochastic processes, as well as to pract...

  17. Towards Integration of Biological and Physiological Functions at Multiple Levels

    Directory of Open Access Journals (Sweden)

    Taishin eNomura

    2010-12-01

    Full Text Available An aim of systems physiology today can be stated as to establish logical and quantitative bridges between phenomenological attributes of physiological entities such as cells and organs and physical attributes of biological entities, i.e., biological molecules, allowing us to describe and better understand physiological functions in terms of underlying biological functions. This article illustrates possible schema that can be used for promoting systems physiology by integrating quantitative knowledge of biological and physiological functions at multiple levels of time and space with the use of information technology infrastructure. Emphasis will be made for systematic, modular, hierarchical, and standardized descriptions of mathematical models of the functions and advantages for the use of them.

  18. Biomimetic Scaffold Design for Functional and Integrative Tendon Repair

    Science.gov (United States)

    Zhang, Xinzhi; Bogdanowicz, Danielle; Erisken, Cevat; Lee, Nancy M.; Lu, Helen H.

    2012-01-01

    Rotator cuff tears represent the most common shoulder injuries in the United States. The debilitating effect of this degenerative condition coupled with the high incidence of failure associated with existing graft choices underscore the clinical need for alternative grafting solutions. The two critical design criteria for the ideal tendon graft would require the graft to not only exhibit physiologically relevant mechanical properties but also be able to facilitate functional graft integration by promoting the regeneration of the native tendon-to-bone interface. Centered on these design goals, this review will highlight current approaches to functional and integrative tendon repair. In particular, the application of biomimetic design principles through the use of nanofiber- and nanocomposite-based scaffolds for tendon tissue engineering will be discussed. This review will begin with nanofiber-based approaches to functional tendon repair, followed by a section highlighting the exciting research on tendon-to-bone interface regeneration, with an emphasis on implementation of strategic biomimicry in nanofiber scaffold design and the concomitant formation of graded multi-tissue systems for integrative soft tissue repair. This review will conclude with a summary and future directions section. PMID:22244070

  19. Adenosine Receptor Heteromers and their Integrative Role in Striatal Function

    Directory of Open Access Journals (Sweden)

    Sergi Ferré

    2007-01-01

    Full Text Available By analyzing the functional role of adenosine receptor heteromers, we review a series of new concepts that should modify our classical views of neurotransmission in the central nervous system (CNS. Neurotransmitter receptors cannot be considered as single functional units anymore. Heteromerization of neurotransmitter receptors confers functional entities that possess different biochemical characteristics with respect to the individual components of the heteromer. Some of these characteristics can be used as a “biochemical fingerprint” to identify neurotransmitter receptor heteromers in the CNS. This is exemplified by changes in binding characteristics that are dependent on coactivation of the receptor units of different adenosine receptor heteromers. Neurotransmitter receptor heteromers can act as “processors” of computations that modulate cell signaling, sometimes critically involved in the control of pre- and postsynaptic neurotransmission. For instance, the adenosine A1-A2A receptor heteromer acts as a concentration-dependent switch that controls striatal glutamatergic neurotransmission. Neurotransmitter receptor heteromers play a particularly important integrative role in the “local module” (the minimal portion of one or more neurons and/or one or more glial cells that operates as an independent integrative unit, where they act as processors mediating computations that convey information from diverse volume-transmitted signals. For instance, the adenosine A2A-dopamine D2 receptor heteromers work as integrators of two different neurotransmitters in the striatal spine module.

  20. Positive psychological functioning in breast cancer: An integrative review.

    Science.gov (United States)

    Casellas-Grau, Anna; Vives, Jaume; Font, Antoni; Ochoa, Cristian

    2016-06-01

    This integrative review aimed to analyze the research into positive psychological functioning after breast cancer, and to integrate the most relevant findings relating to sociodemographic, medical and psychosocial factors. Relevant outcomes were identified from electronic databases (Medline, PsycINFO, Web of Science, Scopus, Cochrane, CINAHL, and Wiley Online Library) up to July 2015. A Google search was performed to identify unindexed literature. Dissertations and theses were searched on Proquest Dissertations and Theses, DIALNET and TDX. Selection criteria included empirical studies assessing relationships between breast cancer and positive functioning, without restrictions on type of participants. In total, 134 studies met the inclusion criteria. The sociodemographic, medical, and psychosocial characteristics associated with well-being, posttraumatic growth, finding benefit and meaning were being young, undergoing chemotherapy, and having social support. The last two of these characteristics were time-oriented. The culture of the different samples and positive dispositional characteristics like optimism had an influence on the women's coping styles. Socioeconomic status and level of education were also associated with positive psychological functioning. The perceived impact of breast cancer on patient, as well as the perceived support from significant others can result in better functioning in women with breast cancer. The results highlight that oncology health professionals should take into account not only the individual and medical characteristics, but also the stage of the oncological process and the psychosocial environment of patients in order to promote their positive functioning.