Association of goal orientation with work engagement and burnout in emergency nurses.

Science.gov (United States)

Adriaenssens, Jef; De Gucht, Veronique; Maes, Stan

2015-01-01

Goal orientation is a mindset towards the achievement of work-related goals, and it has been found to be related to occupational well-being. This study explored to what extent the 4-dimensional model of goal orientation adds additional variance to the explanation of burnout and work engagement in emergency nurses, after controlling for demographics, job characteristics and organizational variables. Self-report questionnaires including the Leiden Quality of Work Questionnaire for Nurses, Goal Orientation Questionnaire, Maslach Burnout Inventory and Utrecht Work Engagement Scale were completed by 170 out of 274 emergency nurses from 13 secondary Belgian hospitals (response rate 62%). Hierarchical multiple regression analyses were conducted. Goal orientation explained 14 and 13% of the variance in burnout and work engagement respectively. Job control was predictive of both outcomes. Job demands was a predictor of burnout, and social support predicted work engagement. Reward was related to work engagement. The mastery-approach goal orientation was strongly related to an increase in work engagement and to a decrease in burnout. The performance-avoidance goal orientation was strongly related to a decrease in work engagement and to an increase in burnout. The performance-approach and mastery-avoidance goal orientations were not predictive for the two outcome variables. Goal orientation explains additional variance in burnout and work engagement over and above work characteristics and organizational variables. A mastery-approach goal orientation appears to be beneficial while a performance-avoidance goal orientation is not. Hospital management should therefore invest in personal involvement and growth of ER-nurses and in a rewarding organizational culture.

Comparing the achievement goal orientation of mathematics ...

African Journals Online (AJOL)

A quantitative, exploratory research design was used. ... Goals affect how learners approach mathematics learning activities, which could ... research on academic success and ADHD has focused on reading ... from the data analysis process. ... Achievement goal orientation is based on a ...... Research design: Qualitative,.

Goal orientations predict academic performance beyond intelligence and personality

NARCIS (Netherlands)

Steinmayr, R.; Bipp, T.; Spinath, B.

2011-01-01

Goal orientations are thought to be an important predictor of scholastic achievement. The present paper investigated the joint influence of goal orientations, intelligence, and personality on school performance in a sample of N = 520 11th and 12th graders (303 female; mean age M = 16.94 years).

Comparing the achievement goal orientation of mathematics ...

African Journals Online (AJOL)

Comparing the achievement goal orientation of mathematics learners with and without attention-deficit hyperactivity disorder. ... in recognising methods to direct learners' goals for better engagement with and improved results in mathematics, which could support learners to develop to their full potential in the subject.

Oriented color centres being formed in anisotropic action of optical radiation on sodium-silicate glass

International Nuclear Information System (INIS)

Barinova, N.A.; Glebov, L.B.; Dokuchaev, V.G.; Savel'ev, V.L.

1992-01-01

A study was made of anisotropy of absorption of hole colour centres appearing in sodium-silicate glass due to anisotropic action of UV radiation. In case of such action in the field of long-wave edge of their fundamental absorption oriented hole colour centres occurs with maximum of absorption bands to 2.0, 2.8, 4.1 eV. Principal direction of hole colour centres orientation in this case coincides with orientation of ionized glass matrix centres. Orientation of such kind is connected with selective ionization of disorderedly oriented centres forming edge of fundamental absorption. Value of guided dichroism of colour centres absorption is determined by hole migration

Self-determination and goal orientation in track and field.

Science.gov (United States)

Chin, Ngien-Siong; Khoo, Selina; Low, Wah-Yun

2012-06-01

This study investigated gender, age group and locality differences in adolescent athletes' self-determination motivation and goal orientations in track and field. It also examined the relationship between the self-determination theory and achievement goal theory. A total of 632 (349 boys, 283 girls) adolescent athletes (aged 13-18 years) completed the Sports Motivation Scale and Task and Ego Orientation in Sport Questionnaire. Results indicated significant differences between gender on intrinsic motivation, extrinsic motivation, amotivation (t(630) = 4.10, p amotivation and ego orientation. A significant difference was found between age groups on task orientation (t(630) = 1.94, p amotivation (r = 0.10, p amotivation accounted for 30.5% of the variances in task orientation.

COBRA, an Arabidopsis extracellular glycosyl-phosphatidyl inositol-anchored protein, specifically controls highly anisotropic expansion through its involvement in cellulose microfibril orientation.

Science.gov (United States)

Roudier, François; Fernandez, Anita G; Fujita, Miki; Himmelspach, Regina; Borner, Georg H H; Schindelman, Gary; Song, Shuang; Baskin, Tobias I; Dupree, Paul; Wasteneys, Geoffrey O; Benfey, Philip N

2005-06-01

The orientation of cell expansion is a process at the heart of plant morphogenesis. Cellulose microfibrils are the primary anisotropic material in the cell wall and thus are likely to be the main determinant of the orientation of cell expansion. COBRA (COB) has been identified previously as a potential regulator of cellulose biogenesis. In this study, characterization of a null allele, cob-4, establishes the key role of COB in controlling anisotropic expansion in most developing organs. Quantitative polarized-light and field-emission scanning electron microscopy reveal that loss of anisotropic expansion in cob mutants is accompanied by disorganization of the orientation of cellulose microfibrils and subsequent reduction of crystalline cellulose. Analyses of the conditional cob-1 allele suggested that COB is primarily implicated in microfibril deposition during rapid elongation. Immunodetection analysis in elongating root cells revealed that, in agreement with its substitution by a glycosylphosphatidylinositol anchor, COB was polarly targeted to both the plasma membrane and the longitudinal cell walls and was distributed in a banding pattern perpendicular to the longitudinal axis via a microtubule-dependent mechanism. Our observations suggest that COB, through its involvement in cellulose microfibril orientation, is an essential factor in highly anisotropic expansion during plant morphogenesis.

Co-occurrence of Local Anisotropic Gradient Orientations (CoLlAGe): A new radiomics descriptor.

Science.gov (United States)

Prasanna, Prateek; Tiwari, Pallavi; Madabhushi, Anant

2016-11-22

In this paper, we introduce a new radiomic descriptor, Co-occurrence of Local Anisotropic Gradient Orientations (CoLlAGe) for capturing subtle differences between benign and pathologic phenotypes which may be visually indistinguishable on routine anatomic imaging. CoLlAGe seeks to capture and exploit local anisotropic differences in voxel-level gradient orientations to distinguish similar appearing phenotypes. CoLlAGe involves assigning every image voxel an entropy value associated with the co-occurrence matrix of gradient orientations computed around every voxel. The hypothesis behind CoLlAGe is that benign and pathologic phenotypes even though they may appear similar on anatomic imaging, will differ in their local entropy patterns, in turn reflecting subtle local differences in tissue microarchitecture. We demonstrate CoLlAGe's utility in three clinically challenging classification problems: distinguishing (1) radiation necrosis, a benign yet confounding effect of radiation treatment, from recurrent tumors on T1-w MRI in 42 brain tumor patients, (2) different molecular sub-types of breast cancer on DCE-MRI in 65 studies and (3) non-small cell lung cancer (adenocarcinomas) from benign fungal infection (granulomas) on 120 non-contrast CT studies. For each of these classification problems, CoLlAGE in conjunction with a random forest classifier outperformed state of the art radiomic descriptors (Haralick, Gabor, Histogram of Gradient Orientations).

Validation of a performance model on entrepreneurship based on self-efficacy, personal goal orientation and environment goal orientation using Structural Equation Modeling

OpenAIRE

Figueroa Reyes, Rodrigo

2013-01-01

Master's thesis in International hotel and tourism management Three are the main contributions that I pretend to provide through this research. First, I will combine four theoretical constructs that, to my knowledge, have not been worked through this way before. I mean that this research is attempting to validate and estimate the existing relationships between Self-efficacy, Perceived Personal Goal Orientation, Perceived Environment Goal Orientation and Perceived Personal Performance. T...

Goal Orientation, Deep Learning, and Sustainable Feedback in Higher Business Education

Science.gov (United States)

Geitz, Gerry; Brinke, Desirée Joosten-ten; Kirschner, Paul A.

2015-01-01

Relations between and changeability of goal orientation and learning behavior have been studied in several domains and contexts. To alter the adopted goal orientation into a mastery orientation and increase a concomitant deep learning in international business students, a sustainable feedback intervention study was carried out. Sustainable…

Self-Determination and Goal Orientation in Track and Field

Science.gov (United States)

Chin, Ngien-Siong; Khoo, Selina; Low, Wah-Yun

2012-01-01

This study investigated gender, age group and locality differences in adolescent athletes’ self-determination motivation and goal orientations in track and field. It also examined the relationship between the self-determination theory and achievement goal theory. A total of 632 (349 boys, 283 girls) adolescent athletes (aged 13–18 years) completed the Sports Motivation Scale and Task and Ego Orientation in Sport Questionnaire. Results indicated significant differences between gender on intrinsic motivation, extrinsic motivation, amotivation (t(630) = 4.10, p motivation, extrinsic motivation, amotivation and ego orientation. A significant difference was found between age groups on task orientation (t(630) = 1.94, p motivation. Task orientation was related to intrinsic motivation (r = 0.55, p extrinsic motivation (r = 0.55, p motivation (r = 0.30, p extrinsic motivation (r = 0.36, p motivation, extrinsic motivation and amotivation accounted for 30.5% of the variances in task orientation. PMID:23486244

Polarized Raman anisotropic response of collagen in tendon: towards 3D orientation mapping of collagen in tissues.

Directory of Open Access Journals (Sweden)

Leonardo Galvis

Full Text Available In this study, polarized Raman spectroscopy (PRS was used to characterize the anisotropic response of the amide I band of collagen as a basis for evaluating three-dimensional collagen fibril orientation in tissues. Firstly, the response was investigated theoretically by applying classical Raman theory to collagen-like peptide crystal structures. The theoretical methodology was then tested experimentally, by measuring amide I intensity anisotropy in rat tail as a function of the orientation of the incident laser polarization. For the theoretical study, several collagen-like triple-helical peptide crystal structures obtained from the Protein Data Bank were rotated "in plane" and "out of plane" to evaluate the role of molecular orientation on the intensity of the amide I band. Collagen-like peptides exhibit a sinusoidal anisotropic response when rotated "in plane" with respect to the polarized incident laser. Maximal intensity was obtained when the polarization of the incident light is perpendicular to the molecule and minimal when parallel. In the case of "out of plane" rotation of the molecular structure a decreased anisotropic response was observed, becoming completely isotropic when the structure was perpendicular to the plane of observation. The theoretical Raman response of collagen was compared to that of alpha helical protein fragments. In contrast to collagen, alpha helices have a maximal signal when incident light is parallel to the molecule and minimal when perpendicular. For out-of-plane molecular orientations alpha-helix structures display a decreased average intensity. Results obtained from experiments on rat tail tendon are in excellent agreement with the theoretical predictions, thus demonstrating the high potential of PRS for experimental evaluation of the three-dimensional orientation of collagen fibers in biological tissues.

Goal-Oriented Self-Adaptive hp Finite Element Simulation of 3D DC Borehole Resistivity Simulations

KAUST Repository

Calo, Victor M.

2011-05-14

In this paper we present a goal-oriented self-adaptive hp Finite Element Method (hp-FEM) with shared data structures and a parallel multi-frontal direct solver. The algorithm automatically generates (without any user interaction) a sequence of meshes delivering exponential convergence of a prescribed quantity of interest with respect to the number of degrees of freedom. The sequence of meshes is generated from a given initial mesh, by performing h (breaking elements into smaller elements), p (adjusting polynomial orders of approximation) or hp (both) refinements on the finite elements. The new parallel implementation utilizes a computational mesh shared between multiple processors. All computational algorithms, including automatic hp goal-oriented adaptivity and the solver work fully in parallel. We describe the parallel self-adaptive hp-FEM algorithm with shared computational domain, as well as its efficiency measurements. We apply the methodology described to the three-dimensional simulation of the borehole resistivity measurement of direct current through casing in the presence of invasion.

Self-Determination and Goal Orientation in Track and Field

OpenAIRE

Chin, Ngien-Siong; Khoo, Selina; Low, Wah-Yun

2012-01-01

This study investigated gender, age group and locality differences in adolescent athletes? self-determination motivation and goal orientations in track and field. It also examined the relationship between the self-determination theory and achievement goal theory. A total of 632 (349 boys, 283 girls) adolescent athletes (aged 13?18 years) completed the Sports Motivation Scale and Task and Ego Orientation in Sport Questionnaire. Results indicated significant differences between gender on intrin...

Teachers' Influence on Goal Orientation: Exploring the Relationship between Eighth Graders' Goal Orientation, Their Emotional Development, Their Perceptions of Learning, and Their Teachers' Instructional Strategies.

Science.gov (United States)

Nichols, William Dee; Jones, Jeanneine P.; Hancock, Dawson R.

2003-01-01

Explores how students' perceived learning relates to emotions, motivation, and goal orientation. Finds that students significantly reported more negative emotions than positive emotions, thus indicating that the emotions of the learner were more negative, the motivation was more extrinsic and the goal orientation of the learners could be…

Goal Orientation in Teams: The Role of Diversity

NARCIS (Netherlands)

A. Nederveen Pieterse (Anne)

2009-01-01

textabstractOrganizations make increasingly use of teams as their basic structure, making it more and more important to determine what enables optimal team functioning. Over the past decades, the goals people focus on in achievement settings (i.e. goal orientation) is shown to be highly important

Teachers' goal orientations: Effects on classroom goal structures and emotions.

Science.gov (United States)

Wang, Hui; Hall, Nathan C; Goetz, Thomas; Frenzel, Anne C

2017-03-01

Prior research has shown teachers' goal orientations to influence classroom goal structures (Retelsdorf et al., 2010, Learning and Instruction, 20, 30) and to also impact their emotions (Schutz et al., 2007, Emotion in education, Academic Press, Amsterdam, the Netherlands). However, empirical research evaluating possible causal ordering and mediation effects involving these variables in teachers is presently lacking. The present 6-month longitudinal study investigated the relations between varied motivational, behavioural, and emotional variables in practising teachers. More specifically, this study examined the reciprocal, longitudinal relations between teachers' achievement goals, classroom goal structures, and teaching-related emotions, as well as cumulative mediational models in which observed causal relations were evaluated. Participants were 495 practising teachers from Canada (86% female, M = 42 years). Teachers completed a web-based questionnaire at two time points assessing their instructional goals, perceived classroom goal structures, achievement emotions, and demographic items. Results from cross-lagged analyses and structural equation modelling showed teachers' achievement goals to predict their perceived classroom goal structures that, in turn, predicted their teaching-related emotions. The present results inform both Butler's (2012, Journal of Educational Psychology, 104, 726) theory on teachers' achievement goals and Frenzel's (2014, International handbook of emotions in education, Routledge, New York, NY) model of teachers' emotions in showing teachers' instructional goals to both directly predict their teaching-related emotions, as well as indirectly through the mediating effects of classroom goal structures. © 2016 The British Psychological Society.

Electrostatic flocking of chitosan fibres leads to highly porous, elastic and fully biodegradable anisotropic scaffolds.

Science.gov (United States)

Gossla, Elke; Tonndorf, Robert; Bernhardt, Anne; Kirsten, Martin; Hund, Rolf-Dieter; Aibibu, Dilibar; Cherif, Chokri; Gelinsky, Michael

2016-10-15

Electrostatic flocking - a common textile technology which has been applied in industry for decades - is based on the deposition of short polymer fibres in a parallel aligned fashion on flat or curved substrates, covered with a layer of a suitable adhesive. Due to their highly anisotropic properties the resulting velvet-like structures can be utilised as scaffolds for tissue engineering applications in which the space between the fibres can be defined as pores. In the present study we have developed a fully resorbable compression elastic flock scaffold from a single material system based on chitosan. The fibres and the resulting scaffolds were analysed concerning their structural and mechanical properties and the biocompatibility was tested in vitro. The tensile strength and Young's modulus of the chitosan fibres were analysed as a function of the applied sterilisation technique (ethanol, supercritical carbon dioxide, γ-irradiation and autoclaving). All sterilisation methods decreased the Young's modulus (from 14GPa to 6-12GPa). The tensile strength was decreased after all treatments - except after the autoclaving of chitosan fibres submerged in water. Compressive strength of the highly porous flock scaffolds was 18±6kPa with a elastic modulus in the range of 50-100kPa. The flocked scaffolds did not show any cytotoxic effect during indirect or direct culture of human mesenchymal stem cells or the sarcoma osteogenic cell line Saos-2. Furthermore cell adhesion and proliferation of both cell types could be observed. This is the first demonstration of a fully biodegradable scaffold manufactured by electrostatic flocking. Most tissues possess anisotropic fibrous structures. In contrast, most of the commonly used scaffolds have an isotropic morphology. By utilising the textile technology of electrostatic flocking, highly porous and clearly anisotropic scaffolds can be manufactured. Flocking leads to parallel aligned short fibres, glued on the surface of a substrate

Relationship among achievement goal orientations and multidimensional situational motivation in physical education.

Science.gov (United States)

Standage, Martyn; Treasure, Darren C

2002-03-01

Contemporary research suggests that task and ego achievement goal orientations affect students' intrinsic motivation in physical education. This research has assessed intrinsic motivation as a unidimensional contruct, however, which is inconsistent with the more contemporary postulates of self-determination theory (Deci & Ryan, 1985, 1991) which states that intrinsic motivation is only one type of motivation. To date, research has not addressed whether different types of motivation at the situational level are influenced by the proneness to adopt task or ego involvement. To examine the relationship between achievement goal orientations and multidimensional situational motivation in PE. Middle school children (182 male, 136 female; M age = 13.2 years). Responded to questionnaires assessing their dispositional goal orientation (POSQ; Roberts, Treasure, & Balague, 1998) and situational motivation (SIMS; Guay, Vallerand, & Blanchard, 2000) in PE. Task orientation was found to be positively associated with more self-determined types of situational motivation. Ego orientation was weakly related to less self-determined motivation. An extreme group split was conducted to create four goal groups and goal profile analyses conducted. A significant MANOVA was followed by univariate analyses, post hoc comparisons, and calculated effect sizes, which revealed that groups high in task orientation reported more motivationally adaptive responses than groups low in task orientation. The results suggest that a high level of task orientation singularly or in combination with ego orientation fosters self-determined situational motivation in the context of PE.

Modeling the characteristic etch morphologies along specific crystallographic orientations by anisotropic chemical etching

Directory of Open Access Journals (Sweden)

Kun-Dar Li

2018-02-01

Full Text Available To improve the advanced manufacturing technology for functional materials, a sophisticated control of chemical etching process is highly demanded, especially in the fields of environment and energy related applications. In this study, a phase-field-based model is utilized to investigate the etch morphologies influenced by the crystallographic characters during anisotropic chemical etching. Three types of etching modes are inspected theoretically, including the isotropic, and preferred oriented etchings. Owing to the specific etching behavior along the crystallographic directions, different characteristic surface structures are presented in the simulations, such as the pimple-like, pyramidal hillock and ridge-like morphologies. In addition, the processing parameters affecting the surface morphological formation and evolution are also examined systematically. According to the numerical results, the growth mechanism of surface morphology in a chemical etching is revealed distinctly. While the etching dynamics plays a dominant role on the surface formation, the characteristic surface morphologies corresponding to the preferred etching direction become more apparent. As the atomic diffusion turned into a determinative factor, a smoothened surface would appear, even under the anisotropic etching conditions. These simulation results provide fundamental information to enhance the development and application of anisotropic chemical etching techniques.

Modeling the characteristic etch morphologies along specific crystallographic orientations by anisotropic chemical etching

Science.gov (United States)

Li, Kun-Dar; Miao, Jin-Ru

2018-02-01

To improve the advanced manufacturing technology for functional materials, a sophisticated control of chemical etching process is highly demanded, especially in the fields of environment and energy related applications. In this study, a phase-field-based model is utilized to investigate the etch morphologies influenced by the crystallographic characters during anisotropic chemical etching. Three types of etching modes are inspected theoretically, including the isotropic, and preferred oriented etchings. Owing to the specific etching behavior along the crystallographic directions, different characteristic surface structures are presented in the simulations, such as the pimple-like, pyramidal hillock and ridge-like morphologies. In addition, the processing parameters affecting the surface morphological formation and evolution are also examined systematically. According to the numerical results, the growth mechanism of surface morphology in a chemical etching is revealed distinctly. While the etching dynamics plays a dominant role on the surface formation, the characteristic surface morphologies corresponding to the preferred etching direction become more apparent. As the atomic diffusion turned into a determinative factor, a smoothened surface would appear, even under the anisotropic etching conditions. These simulation results provide fundamental information to enhance the development and application of anisotropic chemical etching techniques.

Anisotropic ferromagnetic behaviors in highly orientated epitaxial NiO-based thin films

Directory of Open Access Journals (Sweden)

Yu-Jun Zhang

2015-07-01

Full Text Available Antiferromagnetic materials attract a great amount of attention recently for promising antiferromagnet-based spintronics applications. NiO is a conventional antiferromagnetic semiconductor material and can show ferromagnetism by doping other magnetic elements. In this work, we synthesized epitaxial Fe-doped NiO thin films on SrTiO3 substrates with various crystal orientations by pulsed laser deposition. The room-temperature ferromagnetism of these films is anisotropic, including the saturated magnetization and the coercive field. The anisotropic magnetic behaviors of Fe-doped NiO diluted magnetic oxide system should be closely correlated to the magnetic structure of antiferromagnetic NiO base. Within the easy plane of NiO, the coercive field of the films becomes smaller, and larger coercive field while tested out of the easy plane of NiO. The saturated magnetization anisotropy is due to different strain applied by different substrates. These results lead us to more abundant knowledge of the exchange interactions in this conventional antiferromagnetic system.

Student goal orientation in learning inquiry skills with modifiable software advisors

Science.gov (United States)

Shimoda, Todd Adrian

A computer support environment (SCI-WISE) for learning and doing inquiry was designed. The system incorporates software advisors that give task completion advice (eg., forming hypotheses), general purpose advice (e.g., brainstorming), or system modification advice. Advisors' knowledge includes concepts, strategies, examples, referrals to other advisors, and criteria for evaluating good products and skills. Students using SCI-WISE can select the advisors' advice type (specific, general, or hints), and when advisors give advice (anytime, alert, or ask). Students can also modify the advisors' knowledge. The system is designed partly on a theoretical framework that assumes giving students higher levels of agency will facilitate higher-level goal orientation (such as knowledge-building) and produce higher levels of competence. In two studies of sixth graders, science students took a pretest of an open-ended inquiry question and a questionnaire that measured their goal orientations. The students worked in pairs on an inquiry project about memory, using one of two versions of SCI-WISE, one modifiable and one not modifiable. After finishing the project, the students took a posttest similar to the pretest, and evaluated the system. The main hypotheses predicted that knowledge-oriented students using the modifiable version would rate the system higher, use it more effectively, and do better on the inquiry posttest than task-oriented students. The results supported many of the hypotheses generated from the theoretical framework. Knowledge-oriented students tended to rate SCI-WISE higher, use more general purpose and system development advisors, and select more general advice and hints than task-oriented students. On the posttest inquiry test, students with higher goal orientations scored higher on average, particularly when paired with another knowledge oriented student. The studies also showed that goal orientation was not correlated with grade point average. Finally, the

The problem of the psychological construct of the personality’s goal orientation

Directory of Open Access Journals (Sweden)

Shylova Nina Ihorivna

2017-12-01

Full Text Available The article considers the concept of the personality’s goal orientation through a certain hierarchy of human goals and motivational content that reflects a personal position. The influence of this position on the achievement of long-term goals is shown mainly in future time situations. The components and forms of expression of the personality’s goal orientation are defined. Four positions are singled out: rationalistic, altruistic, rational and egocentric. The terminological apparatus for qualitative comprehension of the investigated concept is made. A psychological construct of the personality’s target orientation has been developed in the article.

Modern psychometrics for assessing achievement goal orientation: a Rasch analysis.

Science.gov (United States)

Muis, Krista R; Winne, Philip H; Edwards, Ordene V

2009-09-01

A program of research is needed that assesses the psychometric properties of instruments designed to quantify students' achievement goal orientations to clarify inconsistencies across previous studies and to provide a stronger basis for future research. We conducted traditional psychometric and modern Rasch-model analyses of the Achievement Goals Questionnaire (AGQ, Elliot & McGregor, 2001) and the Patterns of Adaptive Learning Scale (PALS, Midgley et al., 2000) to provide an in-depth analysis of the two most popular instruments in educational psychology. For Study 1, 217 undergraduate students enrolled in educational psychology courses participated. Thirty-four were male and 181 were female (two did not respond). Participants completed the AGQ in the context of their educational psychology class. For Study 2, 126 undergraduate students enrolled in educational psychology courses participated. Thirty were male and 95 were female (one did not respond). Participants completed the PALS in the context of their educational psychology class. Traditional psychometric assessments of the AGQ and PALS replicated previous studies. For both, reliability estimates ranged from good to very good for raw subscale scores and fit for the models of goal orientations were good. Based on traditional psychometrics, the AGQ and PALS are valid and reliable indicators of achievement goals. Rasch analyses revealed that estimates of reliability for items were very good but respondent ability estimates varied from poor to good for both the AGQ and PALS. These findings indicate that items validly and reliably reflect a group's aggregate goal orientation, but using either instrument to characterize an individual's goal orientation is hazardous.

Anisotropic evaluation of synthetic surgical meshes.

Science.gov (United States)

Saberski, E R; Orenstein, S B; Novitsky, Y W

2011-02-01

The material properties of meshes used in hernia repair contribute to the overall mechanical behavior of the repair. The anisotropic potential of synthetic meshes, representing a difference in material properties (e.g., elasticity) in different material axes, is not well defined to date. Haphazard orientation of anisotropic mesh material can contribute to inconsistent surgical outcomes. We aimed to characterize and compare anisotropic properties of commonly used synthetic meshes. Six different polypropylene (Trelex(®), ProLite™, Ultrapro™), polyester (Parietex™), and PTFE-based (Dualmesh(®), Infinit) synthetic meshes were selected. Longitudinal and transverse axes were defined for each mesh, and samples were cut in each axis orientation. Samples underwent uniaxial tensile testing, from which the elastic modulus (E) in each axis was determined. The degree of anisotropy (λ) was calculated as a logarithmic expression of the ratio between the elastic modulus in each axis. Five of six meshes displayed significant anisotropic behavior. Ultrapro™ and Infinit exhibited approximately 12- and 20-fold differences between perpendicular axes, respectively. Trelex(®), ProLite™, and Parietex™ were 2.3-2.4 times. Dualmesh(®) was the least anisotropic mesh, without marked difference between the axes. Anisotropy of synthetic meshes has been underappreciated. In this study, we found striking differences between elastic properties of perpendicular axes for most commonly used synthetic meshes. Indiscriminate orientation of anisotropic mesh may adversely affect hernia repairs. Proper labeling of all implants by manufacturers should be mandatory. Understanding the specific anisotropic behavior of synthetic meshes should allow surgeons to employ rational implant orientation to maximize outcomes of hernia repair.

The Relationship between Future Goals and Achievement Goal Orientations: An Intrinsic-Extrinsic Motivation Perspective

Science.gov (United States)

Lee, Jie Qi; McInerney, Dennis M.; Liem, Gregory Arief D.; Ortiga, Yasmin P.

2010-01-01

This research aimed to study the relationships between students' future goals (FGs) and their immediate achievement goal orientations (AGOs) among 5733 Singaporean secondary school students (M age = 14.18, SD = 1.26; 53% boys). To this end, we hypothesized that the relationships between like valenced FGs and AGOs (both intrinsic or both extrinsic)…

THE RELATIONSHIP BETWEEN GOAL-ORIENTATIONS AND SPORT COMMITMENT AMONG ATHLETES

Directory of Open Access Journals (Sweden)

Noshin Benar.

2012-06-01

Full Text Available The purpose of present study was exploring of relationship between goal-orientations and sport commitment among athletes and comparison of goal-orientations and sport commitment and their constructs based on gender and type of sports. Participants were 108 Iranian athlete (40 female and 68 male, who responded to Task and Ego Orientation in Sport Questionnaire (T.E.O.S.Q and Sport Commitment Model (SCM questionnaire. Data were analyzed by Pearson's correlation coefficient, Independent-Samples t-test, and One-way ANOVA at P=0.05. The findings indicated that there were positively and significantly association between constructs, including sport enjoyment, personal investment, social constraints, involvement opportunities, and social support, whereas, involvement alternatives and task-orientation had negatively and significantly association with sport commitment. Also, team and open-skilled sport athletes had sport commitment and ego-orientation more than individual and closed-skilled sport athletes. As well as, female's athletes had sport enjoyment and social support more than male's athletes. It is possible that task-oriented players are elite and expert athletes, because extend and develop their fundamental skills in one's sport by their task-orientate characteristic, and probably these players with these characteristics tendency to turnover until experience more situations. Thus, these players had a less sport commitment than amateur athletes. Also, gender and type of sport differences can be results of individual differences and nature of sports skills. Implications for goal-orientations and sport commitment and their impacts on athletes as well as future research directions are further discussed.

Teachers' Professional Goal Orientations: Importance for Further Training and Sick Leave

Science.gov (United States)

Nitsche, Sebastian; Dickhauser, Oliver; Fasching, Michaela S.; Dresel, Markus

2013-01-01

The present study examined the relevance of teachers' individual goal orientations for the attendance of further training and sick leave in the teaching profession. Regression analysis indicated a positive effect of learning goal orientation (i.e., the desire to improve one's teaching skills and knowledge) along with a negative effect of work…

Sex and Age Differences in Achievement Goal Orientations in Turkish Adolescents

Science.gov (United States)

Sahin, Ertugrul; Topkaya, Nursel; Kürkçü, Recep

2016-01-01

Culture plays an important role in the achievement goal orientations of students, which may vary as they progress through their lifespan. However, research examining achievement goal orientations in the Turkish cultural context is scarce. Based on contextual and developmental theories, the aim of this study was to examine sex and age differences…

Anisotropic Negative Thermal Expansion Behavior of the As-Fabricated Ti-Rich and Equiatomic Ti-Ni Alloys Induced by Preferential Grain Orientation

Science.gov (United States)

Zhao, Zhong-Xun; Ma, Xiao; Cao, Shan-Shan; Ke, Chang-Bo; Zhang, Xin-Ping

2018-03-01

The present study focuses on the anisotropic negative thermal expansion (NTE) behaviors of Ti-rich (Ti54Ni46) and equiatomic Ti-Ni (Ti50Ni50) alloys fabricated by vacuum arc melting and without subsequent plastic deformation. Both alloys exhibit NTE responses in vertical and horizontal directions, and the total strains and CTEs of the NTE stage along the two mutually perpendicular measuring directions are obviously different, indicating obvious anisotropic NTE behavior of the alloys. Besides, the numerical differences between the starting temperature of NTE and austenitic transformation and between the finishing temperature of NTE and austenitic transformation are very small, which indicates that an apparent relationship exists between the NTE behavior and the phase transformation. The microstructure in the vertical cross sections shows obviously preferential orientation characteristics: Ti2Ni phases of both alloys grow along the vertical direction, and B19' martensite of Ti50Ni50 alloy has distinct preferential orientation, which results from a large temperature gradient between the top and the bottom of the button ingots during solidification. The microstructure with preferential orientation induces the anisotropic NTE behavior of the samples.

Transmural variation in elastin fiber orientation distribution in the arterial wall.

Science.gov (United States)

Yu, Xunjie; Wang, Yunjie; Zhang, Yanhang

2018-01-01

The complex three-dimensional elastin network is a major load-bearing extracellular matrix (ECM) component of an artery. Despite the reported anisotropic behavior of arterial elastin network, it is usually treated as an isotropic material in constitutive models. Our recent multiphoton microscopy study reported a relatively uniform elastin fiber orientation distribution in porcine thoracic aorta when imaging from the intima side (Chow et al., 2014). However it is questionable whether the fiber orientation distribution obtained from a small depth is representative of the elastin network structure in the arterial wall, especially when developing structure-based constitutive models. To date, the structural basis for the anisotropic mechanical behavior of elastin is still not fully understood. In this study, we examined the transmural variation in elastin fiber orientation distribution in porcine thoracic aorta and its association with elastin anisotropy. Using multi-photon microscopy, we observed that the elastin fibers orientation changes from a relatively uniform distribution in regions close to the luminal surface to a more circumferential distribution in regions that dominate the media, then to a longitudinal distribution in regions close to the outer media. Planar biaxial tensile test was performed to characterize the anisotropic behavior of elastin network. A new structure-based constitutive model of elastin network was developed to incorporate the transmural variation in fiber orientation distribution. The new model well captures the anisotropic mechanical behavior of elastin network under both equi- and nonequi-biaxial loading and showed improvements in both fitting and predicting capabilities when compared to a model that only considers the fiber orientation distribution from the intima side. We submit that the transmural variation in fiber orientation distribution is important in characterizing the anisotropic mechanical behavior of elastin network and

Goal-orientation, epistemological beliefs towards intrinsic motivation among engineering students: A review

Science.gov (United States)

Benlahcene, Abderrahim; Lashari, Sana Anwar; Lashari, Tahira Anwar

2017-08-01

An aspect that has been exhaustively researched in the motivation of the higher education discipline is the engineering students’ process of goal-orientation, epistemological beliefs towards intrinsic motivation. However, the focus of those researchers as commonly the influence of goal orientations and epistemological beliefs on intrinsic motivation; they have not combined the two factors and examined relationships among goal orientation, epistemological beliefs, and intrinsic motivation. Therefore, although there is a plethora of research on the matter in related disciplines, the researchers commonly do not have consensus on a term that could be used to discuss how engineering students are motivation. This paper identifies literature whose characteristics have focused on the concept of motivation. Attempts were made to retrieve related lietarure empirically examined motivation, extrinsic motivation, Goal orientation, Epistemological beliefs, and intrinsic motivation to gain insight information. It is believed that the present study may help educators in organizing content, preparing curriculum, and evaluate student tasks, so that students can begin to develop more mature and effective epistemological beliefs and design their proper goals for their learning process.

Cross-Lagged Relationships between Career Aspirations and Goal Orientation in Early Adolescents

Science.gov (United States)

Creed, Peter; Tilbury, Clare; Buys, Nick; Crawford, Meegan

2011-01-01

We surveyed 217 students (145 girls; average age = 14.6 years) on two occasions, twelve months apart, on measures of career aspirations (job aspirations, job expectations, educational aspirations) and goal orientation (learning, performance-prove, performance-avoid), and tested the causal relationship between goal orientation and aspirations. We…

Strain, magnetic anisotropy, and anisotropic magnetoresistance in (Ga,Mn)As on high-index substrates: Application to (113)A -oriented layers

Science.gov (United States)

Dreher, L.; Donhauser, D.; Daeubler, J.; Glunk, M.; Rapp, C.; Schoch, W.; Sauer, R.; Limmer, W.

2010-06-01

Based on a detailed theoretical examination of the lattice distortion in high-index epilayers in terms of continuum mechanics, expressions are deduced that allow the calculation and experimental determination of the strain tensor for (hhl) -oriented (Ga,Mn)As layers. Analytical expressions are derived for the strain-dependent free-energy density and for the resistivity tensor for monoclinic and orthorhombic crystal symmetries, phenomenologically describing the magnetic anisotropy and anisotropic magnetoresistance by appropriate anisotropy and resistivity parameters, respectively. Applying the results to (113)A orientation with monoclinic crystal symmetry, the expressions are used to determine the strain tensor and the shear angle of a series of (113)A -oriented (Ga,Mn)As layers by high-resolution x-ray diffraction and to probe the magnetic anisotropy and anisotropic magnetoresistance at 4.2 K by means of angle-dependent magnetotransport. Whereas the transverse-resistivity parameters are nearly unaffected by the magnetic field, the parameters describing the longitudinal resistivity are strongly field dependent.

Academic Identity Status, Goal Orientation, and Academic Achievement among High School Students

Science.gov (United States)

Hejazi, Elaheh; Lavasani, Masoud Gholamali; Amani, Habib; Was, Christopher A.

2012-01-01

The aim of the present study was to determine the relationship between academic identity status, goal orientations and academic achievement. 301 first year high school students completed the Academic Identity Measure and Goal Orientation Questionnaire. The average of 10 exam scores in the final semester was used as an index of academic…

On the critical point of the fully-anisotropic quenched bond-random Potts ferromagnet in triangular and honeycomb lattices

International Nuclear Information System (INIS)

Tsallis, C.; Santos, R.J.V. dos

1983-01-01

On conjectural grounds an equation that provides a very good approximation for the critical temperature of the fully-anisotropic homogeneous quenched bond-random q-state Potts ferromagnet in triangular and honeycomb lattices is presented. Almost all the exact particular results presently known for the square, triangular and honeycomb lattices are recovered; the numerical discrepancy is quite small for the few exceptions. Some predictions that we believe to be exact are made explicite as well. (Author) [pt

The Functional Role of Resignation Orientation on Goal Engagement, Self-Esteem, Life Satisfaction, and Depression.

Science.gov (United States)

Asano, Kenichi; Ishimura, Ikuo; Kodama, Masahiro

2014-11-06

Several studies in Europe and North America have highlighted the importance of resignation or giving up. Research has shown that resignation is as important as goal attainment. Hence, this study examines, using path analysis, the effect of resignation orientation on goal disengagement and reengagement. Furthermore, this study attempts to clarify the implication of resignation orientation for elements of mental well-being. Questionnaires were completed by 261 Japanese college students. Results showed that proactive resignation orientation promotes reestablishment of alternative goals while negative resignation orientation encourages disengagement of the unattainable goals. The findings help explain the functional role of resignation orientation and can inform the development of treatment for resignation-related depression.

Reducing the orientation influence of Mueller matrix measurements for anisotropic scattering media

Science.gov (United States)

Sun, Minghao; He, Honghui; Zeng, Nan; Du, E.; He, Yonghong; Ma, Hui

2014-09-01

Mueller matrix polarimetry techniques contain rich micro-structural information of samples, such as the sizes and refractive indices of scatterers. Recently, Mueller matrix imaging methods have shown great potentials as powerful tools for biomedical diagnosis. However, the orientations of anisotropic fibrous structures in tissues have prominent influence on Mueller matrix measurements, resulting in difficulties for extracting micro-structural information effectively. In this paper, we apply the backscattering Mueller matrix imaging technique to biological samples with different microstructures, such as chicken heart muscle, bovine skeletal muscle, porcine liver and fat tissues. Experimental results show that the directions of the muscle fibers have prominent influence on the Mueller matrix elements. In order to reduce the orientation influence, we adopt the rotation-independent MMT and RLPI parameters, which were proposed in our previous studies, to the tissue samples. Preliminary results in this paper show that the orientation-independent parameters and their statistic features are helpful for analyzing the tissues to obtain their micro-structural properties. Since the micro-structure variations are often related to the pathological changes, the method can be applied to microscope imaging techniques and used to detect abnormal tissues such as cancer and other lesions for diagnosis purposes.

Enhancing Entrepreneurship: The Role of Goal Orientation and Self-Efficacy

Science.gov (United States)

Culbertson, Satoris S.; Smith, Michael R.; Leiva, Pedro I.

2011-01-01

Entrepreneurship has become increasingly important in the workplace. Research suggests motivational traits are important in pursuing entrepreneurial activities. Yet, the extent to which factors influencing entrepreneurial versus managerial goals differ remains unclear. This study assessed the influence of goal orientation and self-efficacy in…

Conjecture on the critical frontier of the fully anisotropic homogeneous quenched bond-mixed potts ferromagnet in square lattice

International Nuclear Information System (INIS)

Tsallis, C.

1980-01-01

It is conjectured that a logarithmic provides a very accurate approximation of the yet unknown critical frontier of a fully anisotropic homogeneous quenched bond-mixed q-state Potts ferromagnet in square lattice, where the random coupling constant J is distributed according to the laws P(J) and P'(J) for 'horizontal' and 'vertical' bonds respectively. Such an equation contains as particular cases a great number of exact results as well as a few recent conjectures (which are definitively only approximate). (Author) [pt

The functional role of resignation orientation on goal engagement, self-esteem, life satisfaction, and depression

Directory of Open Access Journals (Sweden)

Kenichi Asano

2014-10-01

Full Text Available Several studies in Europe and North America have highlighted the importance of resignation or giving up. Research has shown that resignation is as important as goal attainment. Hence, this study examines, using path analysis, the effect of resignation orientation on goal disengagement and reengagement. Furthermore, this study attempts to clarify the implication of resignation orientation for elements of mental well-being. Questionnaires were completed by 261 Japanese college students. Results showed that proactive resignation orientation promotes reestablishment of alternative goals while negative resignation orientation encourages disengagement of the unattainable goals. The findings help explain the functional role of resignation orientation and can inform the development of treatment for resignation-related depression.

Strong orientational coordinates and orientational order parameters for symmetric objects

International Nuclear Information System (INIS)

Haji-Akbari, Amir; Glotzer, Sharon C

2015-01-01

Recent advancements in the synthesis of anisotropic macromolecules and nanoparticles have spurred an immense interest in theoretical and computational studies of self-assembly. The cornerstone of such studies is the role of shape in self-assembly and in inducing complex order. The problem of identifying different types of order that can emerge in such systems can, however, be challenging. Here, we revisit the problem of quantifying orientational order in systems of building blocks with non-trivial rotational symmetries. We first propose a systematic way of constructing orientational coordinates for such symmetric building blocks. We call the arising tensorial coordinates strong orientational coordinates (SOCs) as they fully and exclusively specify the orientation of a symmetric object. We then use SOCs to describe and quantify local and global orientational order, and spatiotemporal orientational correlations in systems of symmetric building blocks. The SOCs and the orientational order parameters developed in this work are not only useful in performing and analyzing computer simulations of symmetric molecules or particles, but can also be utilized for the efficient storage of rotational information in long trajectories of evolving many-body systems. (paper)

A conceptual model of nurses' goal orientation, service behavior, and service performance.

Science.gov (United States)

Chien, Chun-Cheng; Chou, Hsin-Kai; Hung, Shuo-Tsung

2008-01-01

Based on the conceptual framework known as the "service triangle," the authors constructed a model of nurses' goal orientation, service behavior, and service performance to investigate the antecedents and consequences of the medical service behavior provided by nurses. This cross-sectional study collected data from 127 nurses in six hospitals using a mail-in questionnaire. Analysis of the model revealed that the customer-oriented behavior of nurses had a positive influence on organizational citizenship behavior; and both of these behaviors had a significant positive influence on service performance. The results also indicate that a higher learning goal orientation among nurses was associated with the performance of both observable customer-oriented behavior and organizational-citizenship behavior.

On the nature of motivational orientations: implications of assessed goals and gender differences for motivational goal theory.

Science.gov (United States)

Alonso-Tapia, Jesús; Huertas, Juan A; Ruiz, Miguel A

2010-05-01

In a historical revision of the achievement goal construct, Elliot (2005) recognized that there is little consensus on whether the term "goal" in "achievement goal orientations" (GO) is best represented as an "aim", as an overarching orientation encompassing several "aims", or as a combination of aims and other processes -self-regulation, etc.-. Elliot pointed also that goal theory research provides evidence for different models of GO. As there were no consensus on these issues, we decided to get evidence about the nature and structure of GO, about the role of gender differences in the configuration of such structure, and about relations between GO, expectancies, volitional processes and achievement. A total of 382 university students from different faculties of two public universities of Madrid (Spain) that voluntarily accepted to fill in a questionnaire that assessed different goals, expectancies and self-regulatory processes participated in the study. Scales reliability, confirmatory factor analyses, multiple-group analyses, and correlation and regression analyses were carried out. Results support the trichotomous model of GO, the consideration of GO as a combination of aims and other psychological processes, showed some gender differences and favour the adoption of a multiple goal perspective for explaining students' motivation.

An anisotropic elastoplasticity model implemented in FLAG

Energy Technology Data Exchange (ETDEWEB)

Buechler, Miles Allen [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Canfield, Thomas R. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-10-12

Many metals, including Tantalum and Zirconium, exhibit anisotropic elastoplastic behavior at the single crystal level, and if components are manufactured from these metals through forming processes the polycrystal (component) may also exhibit anisotropic elastoplastic behavior. This is because the forming can induce a preferential orientation of the crystals in the polycrystal. One example is a rolled plate of Uranium where the sti /strong orientation of the crystal (c-axis) tends to align itself perpendicular to the rolling direction. If loads are applied to this plate in di erent orientations the sti ness as well as the ow strength of the material will be greater in the through thickness direction than in other directions. To better accommodate simulations of such materials, an anisotropic elastoplasticity model has been implemented in FLAG. The model includes an anisotropic elastic stress model as well as an anisotropic plasticity model. The model could represent single crystals of any symmetry, though it should not be confused with a high- delity crystal plasticity model with multiple slip planes and evolutions. The model is most appropriate for homogenized polycrystalline materials. Elastic rotation of the material due to deformation is captured, so the anisotropic models are appropriate for arbitrary large rotations, but currently they do not account for signi cant change in material texture beyond the elastic rotation of the entire polycrystal.

Relationships between cooperation and goal orientation among male professional and semi-professional team athletes.

Science.gov (United States)

Lameiras, João; Almeida, Pedro L; Garcia-Mas, Alexandre

2014-12-01

In team sports, athletes' goals may focus on the task (enhancing performance, developing better skills, etc.) or on ego (being better than the others, achieving superiority, etc.). This study investigated the relationships between athletes' goal orientation and their tendency to cooperate with teammates and coaches. 158 professional men (M age = 24.1 yr., SD = 4.6) who played on various sport teams participated in this study. Goal orientation was measured with the Portuguese version of the Task and Ego Orientation in Sport Questionnaire, and cooperation was measured with the Questionário de Cooperação Desportiva. Cooperation was positively correlated with task orientation, and negatively correlated with ego orientation. Overall, the findings support that in sports, directing the players' focus on task may promote prosocial behavior.

Anisotropic ray trace

Science.gov (United States)

Lam, Wai Sze Tiffany

Optical components made of anisotropic materials, such as crystal polarizers and crystal waveplates, are widely used in many complex optical system, such as display systems, microlithography, biomedical imaging and many other optical systems, and induce more complex aberrations than optical components made of isotropic materials. The goal of this dissertation is to accurately simulate the performance of optical systems with anisotropic materials using polarization ray trace. This work extends the polarization ray tracing calculus to incorporate ray tracing through anisotropic materials, including uniaxial, biaxial and optically active materials. The 3D polarization ray tracing calculus is an invaluable tool for analyzing polarization properties of an optical system. The 3x3 polarization ray tracing P matrix developed for anisotropic ray trace assists tracking the 3D polarization transformations along a ray path with series of surfaces in an optical system. To better represent the anisotropic light-matter interactions, the definition of the P matrix is generalized to incorporate not only the polarization change at a refraction/reflection interface, but also the induced optical phase accumulation as light propagates through the anisotropic medium. This enables realistic modeling of crystalline polarization elements, such as crystal waveplates and crystal polarizers. The wavefront and polarization aberrations of these anisotropic components are more complex than those of isotropic optical components and can be evaluated from the resultant P matrix for each eigen-wavefront as well as for the overall image. One incident ray refracting or reflecting into an anisotropic medium produces two eigenpolarizations or eigenmodes propagating in different directions. The associated ray parameters of these modes necessary for the anisotropic ray trace are described in Chapter 2. The algorithms to calculate the P matrix from these ray parameters are described in Chapter 3 for

Achievement Goal Orientations and Adolescents' Subjective Well-Being in School: The Mediating Roles of Academic Social Comparison Directions.

Science.gov (United States)

Tian, Lili; Yu, Tingting; Huebner, E Scott

2017-01-01

The purpose of this study was to examine the multiple mediational roles of academic social comparison directions (upward academic social comparison and downward academic social comparison) on the relationships between achievement goal orientations (i.e., mastery goals, performance-approach goals, and performance-avoidance goals) and subjective well-being (SWB) in school (school satisfaction, school affect) in adolescent students in China. A total of 883 Chinese adolescent students (430 males; Mean age = 12.99) completed a multi-measure questionnaire. Structural equation modeling was used to examine the hypotheses. Results indicated that (1) mastery goal orientations and performance-approach goal orientations both showed a statistically significant, positive correlation with SWB in school whereas performance-avoidance goal orientations showed a statistically significant, negative correlation with SWB in school among adolescents; (2) upward academic social comparisons mediated the relation between the three types of achievement goal orientations (i.e., mastery goals, performance-approach goals, and performance-avoidance goals) and SWB in school; (3) downward academic social comparisons mediated the relation between mastery goal orientations and SWB in school as well as the relation between performance-avoidance goal orientations and SWB in school. The findings suggest possible important cultural differences in the antecedents of SWB in school in adolescent students in China compared to adolescent students in Western nations.

Jet quenching in a strongly coupled anisotropic plasma

Science.gov (United States)

Chernicoff, Mariano; Fernández, Daniel; Mateos, David; Trancanelli, Diego

2012-08-01

The jet quenching parameter of an anisotropic plasma depends on the relative orientation between the anisotropic direction, the direction of motion of the parton, and the direction along which the momentum broadening is measured. We calculate the jet quenching parameter of an anisotropic, strongly coupled {N} = 4 plasma by means of its gravity dual. We present the results for arbitrary orientations and arbitrary values of the anisotropy. The anisotropic value can be larger or smaller than the isotropic one, and this depends on whether the comparison is made at equal temperatures or at equal entropy densities. We compare our results to analogous calculations for the real-world quark-gluon plasma and find agreement in some cases and disagreement in others.

Goal Orientations, Locus of Control and Academic Achievement in Prospective Teachers: An Individual Differences Perspective

Science.gov (United States)

Bulus, Mustafa

2011-01-01

The aim of this study is to investigate the role of the prospective teachers' locus of control in goal orientations and of both orientations in academic achievement. The participants were 270 undergraduate students studying in different majors at the Faculty of Education in Pamukkale University. Goal Orientations and Locus of Control Scales were…

Motivational climate, goal orientation and exercise adherence in fitness centers and personal training contexts

Directory of Open Access Journals (Sweden)

Ingi Petitemberte Klain

2014-09-01

Full Text Available This study was conducted to analyze the relationships hypothesized by the Achievement Goal Theory in predicting adherence to exercise. The study participants were 405 individuals exercising in fitness centers with a mean age of 35 years (SD = 17 and 183 individuals exercising with personal trainers with a mean age of 43 years (SD = 16, that answered the Portuguese versions of the Goal Orientation in Exercise Measure and Perceived Motivational Climate in Exercise Questionnaire. The hypothesized structural equation model showed that the mastery motivational climate had a positive impact on task orientation goals, which in turn had a positive impact on exercise adherence. However, performance motivational climate had a positive impact on ego orientation goals, which in turn had a negative impact on exercise adherence.

Upcycling Secondary Physical Education: The Journey to Creating Goal-Oriented Courses

Science.gov (United States)

Nye, Susan; Williams, Jacqueline

2017-01-01

The ultimate goal of a quality physical education program is to develop physically literate individuals who demonstrate skill competencies, apply knowledge, demonstrate health-enhancing behaviors, exhibit prosocial behaviors, and recognize the value of physical activity for a lifetime. The development and implementation of goal-oriented physical…

Achievement Goal Orientations and Subjective Well-Being: A Person-Centred Analysis

Science.gov (United States)

Tuominen-Soini, Heta; Salmela-Aro, Katariina; Niemivirta, Markku

2008-01-01

This study examined whether students with different achievement goal orientation profiles differ in terms of subjective well-being (i.e., self-esteem, depressive symptoms, school-related burnout, and educational goal appraisals). Six groups of students with unique motivational profiles were identified. Observed differences in subjective well-being…

Goal-oriented Site Characterization in Hydrogeological Applications: An Overview

Science.gov (United States)

Nowak, W.; de Barros, F.; Rubin, Y.

2011-12-01

In this study, we address the importance of goal-oriented site characterization. Given the multiple sources of uncertainty in hydrogeological applications, information needs of modeling, prediction and decision support should be satisfied with efficient and rational field campaigns. In this work, we provide an overview of an optimal sampling design framework based on Bayesian decision theory, statistical parameter inference and Bayesian model averaging. It optimizes the field sampling campaign around decisions on environmental performance metrics (e.g., risk, arrival times, etc.) while accounting for parametric and model uncertainty in the geostatistical characterization, in forcing terms, and measurement error. The appealing aspects of the framework lie on its goal-oriented character and that it is directly linked to the confidence in a specified decision. We illustrate how these concepts could be applied in a human health risk problem where uncertainty from both hydrogeological and health parameters are accounted.

Achievement Goal Orientations and Adolescents’ Subjective Well-Being in School: The Mediating Roles of Academic Social Comparison Directions

Science.gov (United States)

Tian, Lili; Yu, Tingting; Huebner, E. Scott

2017-01-01

The purpose of this study was to examine the multiple mediational roles of academic social comparison directions (upward academic social comparison and downward academic social comparison) on the relationships between achievement goal orientations (i.e., mastery goals, performance-approach goals, and performance-avoidance goals) and subjective well-being (SWB) in school (school satisfaction, school affect) in adolescent students in China. A total of 883 Chinese adolescent students (430 males; Mean age = 12.99) completed a multi-measure questionnaire. Structural equation modeling was used to examine the hypotheses. Results indicated that (1) mastery goal orientations and performance-approach goal orientations both showed a statistically significant, positive correlation with SWB in school whereas performance-avoidance goal orientations showed a statistically significant, negative correlation with SWB in school among adolescents; (2) upward academic social comparisons mediated the relation between the three types of achievement goal orientations (i.e., mastery goals, performance-approach goals, and performance-avoidance goals) and SWB in school; (3) downward academic social comparisons mediated the relation between mastery goal orientations and SWB in school as well as the relation between performance-avoidance goal orientations and SWB in school. The findings suggest possible important cultural differences in the antecedents of SWB in school in adolescent students in China compared to adolescent students in Western nations. PMID:28197109

Monte carlo simulation of anisotropic grain growth in liquid phase sintering

International Nuclear Information System (INIS)

Han, Yoon Soo; Kim, Do Kyung

2003-01-01

One of the key techniques in modern engineering ceramic system is microstructural control of anisotropic grain growth because grain orientation and shape proved to have an influence on mechanic, dielectric and electric behavior of ceramics. But until now, computer simulation for grain growth has not sufficiently addressed to this subject. The reason is that simulation algorithm was laborious because it has to contain mass transfer through liquid phase and especially anisotropic grain growth has to be considered based on interfacial properties in real system. The goal of present study is simulation of anisotropic grain growth in liquid phase by Q-states model. To give anisotropic inherency to grains, constraint on mobility to specific boundaries was applied. For comparison, we measured grain size distribution and deduced grain growth kinetics from relation ship between average grain size and time. As a result, the grain size distribution functions become broader and the peak height decreases as the anisotropy is increased. The growth exponent 0.67 and 0.47 found by linear fitting have slightly different values in comparison with work of Grest et al. but similar is trend to the decrease of exponent with anisotropy

Groundstate fidelity phase diagram of the fully anisotropic two-leg spin-½ XXZ ladder

Science.gov (United States)

Li, Sheng-Hao; Shi, Qian-Qian; Batchelor, Murray T.; Zhou, Huan-Qiang

2017-11-01

The fully anisotropic two-leg spin-\\tfrac{1}{2} XXZ ladder model is studied in terms of an algorithm based on the tensor network (TN) representation of quantum many-body states as an adaptation of projected entangled pair states to the geometry of translationally invariant infinite-size quantum spin ladders. The TN algorithm provides an effective method to generate the groundstate wave function, which allows computation of the groundstate fidelity per lattice site, a universal marker to detect phase transitions in quantum many-body systems. The groundstate fidelity is used in conjunction with local order and string order parameters to systematically map out the groundstate phase diagram of the ladder model. The phase diagram exhibits a rich diversity of quantum phases. These are the ferromagnetic, stripe ferromagnetic, rung singlet, rung triplet, Néel, stripe Néel and Haldane phases, along with the two XY phases XY1 and XY2.

The Effects of Goal-Oriented Instructions in Digital Game-Based Learning

Science.gov (United States)

Erhel, Séverine; Jamet, Eric

2016-01-01

Few studies have investigated the effects of the instructions provided in educational computer games on cognitive processing and learning outcomes. In our experiment, we sought to compare the effects on learning outcomes of two different types of goal-oriented instructions: "mastery-goal" instructions, which prompt learners to develop…

Low-temperature nuclear orientation

International Nuclear Information System (INIS)

Stone, N.J.; Postma, H.

1986-01-01

This book comprehensively surveys the many aspects of the low temperature nuclear orientation method. The angular distribution of radioactive emissions from nuclei oriented by hyperfine interactions in solids, is treated experimentally and theoretically. A general introductory chapter is followed by formal development of the theory of the orientation process and the anisotropic emission of decay products from oriented nuclei, applied to radioactive decay and to reactions. Five chapters on applications to nuclear physics cover experimental studies of alpha, beta and gamma emission, nuclear moment measurement and level structure information. Nuclear orientation studies of parity non-conservation and time reversal asymmetry are fully described. Seven chapters cover aspects of hyperfine interactions, magnetic and electric, in metals, alloys and insulating crystals, including ordered systems. Relaxation phenomena and the combined technique of NMR detection using oriented nuclei are treated at length. Chapters on the major recent development of on-line facilities, giving access to short lived nuclei far from stability, on the use of nuclear orientation for thermometry below 1 Kelvin and on technical aspects of the method complete the main text. Extensive appendices, table of relevant parameters and over 1000 references are included to assist the design of future experiments. (Auth.)

Chinese Students' Goal Orientation in English Learning: A Study Based on Autonomous Inquiry Model

Science.gov (United States)

Zhang, Jianfeng

2014-01-01

Goal orientation is a kind of theory of learning motivation, which helps learners to develop their capability by emphasis on new techniques acquiring and environment adapting. In this study, based on the autonomous inquiry model, the construction of Chinese students' goal orientations in English learning are summarized according to the data…

Involved and Focused? Students' Perceptions of Institutional Identity, Personal Goal Orientation and Levels of Campus Engagement

Science.gov (United States)

Ferrari, Joseph R.; McCarthy, Brendan J.; Milner, Lauren A.

2009-01-01

The present study explores the relationship between students' perception of their institution's mission identity, personal goal orientation tendencies, and the extent to which they engage in mission-driven activities. Goal orientation research categorizes student motivations in three ways: mastery orientation (MO), performance-approach (PAp)…

Examination of group cohesiveness levels and goal orientations of basketball players

Directory of Open Access Journals (Sweden)

Ötkan Can Çavin

2017-01-01

Full Text Available This research intends to examine goal orientation and group cohesiveness levels of basketball players. 243 mature players who play in the leagues of Turkish Basketball Federation in 2016- 2017 season participated the study. “Task and Ego Orientation in Sports” and “Group Cohesiveness” questionnaires are used in study. While frequency, arithmetic mean and standard deviation is used for the analysis of data, T-Test, One-Way Analysis of Variance (ANOVA and Post-Hoc test statistics (Tukey HSD are used for independent samples. Depending on the variables of gender and educational background of players, a significant difference is identified in sub-dimension of Task Attraction of Group and a low-level negatively significant difference is identified between Ego Orientation in terms of age and sportive age. Significant differences are identified between the Perception of Team Success and sub-dimensions of Social Integration of Group and Social Attraction of Group. No statistically significant difference can be found for the variable of time spent in team in terms of group cohesiveness and goal orientation.

Role Ambiguity and Self-Efficacy: The Moderating Effects of Goal Orientation and Procedural Justice

Science.gov (United States)

Li, Andrew; Bagger, Jessica

2008-01-01

The present study investigated variables that moderated the relationship between role ambiguity and self-efficacy. Results of a field study found support for the moderating role of learning goal orientation, such that the relationship between role ambiguity and self-efficacy was weaker when learning goal orientation was high. In addition, we found…

Predicting Undergraduate Leadership Student Goal Orientation Using Personality Traits

Science.gov (United States)

Lamm, Kevan W.; Sheikh, Emana; Carter, Hannah S.; Lamm, Alexa J.

2017-01-01

Finding strategies to increase the motivation of students, their connection with the material, and retention of the content, has been very important within leadership education. Previous research studies have shown that personality traits can predict desired outcomes, including goal orientation or motivational disposition. However, there have not…

Analysing Lecturer Practice: The Role of Orientations and Goals

Science.gov (United States)

Hannah, John; Stewart, Sepideh; Thomas, Mike

2011-01-01

This article continues a fairly recent trend of research examining the teaching practice of university mathematics lecturers. A lecturer's pedagogical practices in a course in linear algebra were discussed via a supportive community of inquiry. We use Schoenfeld's framework describing the relationship of resources, orientations and goals to…

Core Self-Evaluation and Goal Orientation: Understanding Work Stress

Science.gov (United States)

Morris, Michael Lane; Messal, Carrie B.; Meriac, John P.

2013-01-01

This study investigates the dispositional factors related to work stress. Specifically, previous research has demonstrated a relationship between core self-evaluation (CSE) and general life stress. This article extends past research by examining the relationship between CSE and work stress, and includes goal orientation as a potential mediator of…

Developing instruments concerning scientific epistemic beliefs and goal orientations in learning science: a validation study

Science.gov (United States)

Lin, Tzung-Jin; Tsai, Chin-Chung

2017-11-01

The purpose of this study was to develop and validate two survey instruments to evaluate high school students' scientific epistemic beliefs and goal orientations in learning science. The initial relationships between the sampled students' scientific epistemic beliefs and goal orientations in learning science were also investigated. A final valid sample of 600 volunteer Taiwanese high school students participated in this survey by responding to the Scientific Epistemic Beliefs Instrument (SEBI) and the Goal Orientations in Learning Science Instrument (GOLSI). Through both exploratory and confirmatory factor analyses, the SEBI and GOLSI were proven to be valid and reliable for assessing the participants' scientific epistemic beliefs and goal orientations in learning science. The path analysis results indicated that, by and large, the students with more sophisticated epistemic beliefs in various dimensions such as Development of Knowledge, Justification for Knowing, and Purpose of Knowing tended to adopt both Mastery-approach and Mastery-avoidance goals. Some interesting results were also found. For example, the students tended to set a learning goal to outperform others or merely demonstrate competence (Performance-approach) if they had more informed epistemic beliefs in the dimensions of Multiplicity of Knowledge, Uncertainty of Knowledge, and Purpose of Knowing.

Anisotropic propagation imaging of elastic waves in oriented columnar thin films

Science.gov (United States)

Coffy, E.; Dodane, G.; Euphrasie, S.; Mosset, A.; Vairac, P.; Martin, N.; Baida, H.; Rampnoux, J. M.; Dilhaire, S.

2017-12-01

We report on the observation of strongly anisotropic surface acoustic wave propagation on nanostructured thin films. Two kinds of tungsten samples were prepared by sputtering on a silicon substrate: a conventional thin film with columns normal to the substrate surface, and an oriented columnar architecture using the glancing angle deposition (GLAD) process. Pseudo-Rayleigh waves (PRWs) were imaged as a function of time in x and y directions for both films thanks to a femtosecond heterodyne pump-probe setup. A strong anisotropic propagation as well as a high velocity reduction of the PRWs were exhibited for the GLAD sample. For the wavevector k/2π  =  3  ×  105 m-1 the measured group velocities v x and v y equal 2220 m s-1 for the sample prepared with conventional sputtering, whereas a strong anisotropy appears (v x   =  1600 m s-1 and v y   =  870 m s-1) for the sample prepared with the GLAD process. Using the finite element method, the anisotropy is related to the structural anisotropy of the thin film’s architecture. The drop of PRWs group velocities is mainly assigned to the porous microstructure, especially favored by atomic shadowing effects which appear during the growth of the inclined columns. Such GLAD thin films constitute a new tool for the control of the propagation of surface elastic waves and for the design of new devices with useful properties.

Teachers’ goal orientation profiles and participation in professional development activities

NARCIS (Netherlands)

Kunst, E.M.; van Woerkom, M.; Poell, R.F.

2018-01-01

Participation in professional development activities is important for teachers to continuously improve their knowledge and skills. However, teachers differ in their attitude towards learning activities. This paper examined how different goal orientation profiles are related to participation in

Social Goal Orientations, Interpersonal Stress, and Depressive Symptoms among Early Adolescents in Japan: A Test of the Diathesis-Stress Model Using the Trichotomous Framework of Social Goal Orientations

Science.gov (United States)

Kuroda, Yuji; Sakurai, Shigeo

2011-01-01

This longitudinal study investigated whether depression among early adolescents (aged 12-14 years, N = 116; 65 girls) can be predicted by interactions between social goal orientations and interpersonal stress. Based on Kuroda and Sakurai (2001), this study applied Elliot and Harackiewicz's (1996) trichotomous framework of achievement goals to…

Investigation the Relationship between Goal Orientation and Parenting Styles among Sample of Jordanian University Students

Science.gov (United States)

Mahasneh, Ahmad M.

2014-01-01

The primary purpose of this study is to examine the relationship between goal orientation and parenting styles. Participants of the study completed 650 goal orientation and parenting styles questionnaires. Means, standard deviations, regression and correlation analysis were used for data in establishing the dependence of the two variables. Results…

Fully dense anisotropic nanocomposite Sm(Co,Fe,Zr,Cu,B)z (z=7.5-12) magnets

International Nuclear Information System (INIS)

Huang, M.Q.; Turgut, Z.; Wheeler, B.; Lee, D.; Liu, S.; Ma, B.M.; Peng, Y.G.; Chu, S.Y.; Laughlin, D.E.; Horwath, J.C.; Fingers, R.T.

2005-01-01

Fully dense anisotropic nanocomposite Sm(Co 0.58 Fe 0.31 Zr 0.05 Cu 0.04 B 0.02 ) z (z=7.5-12) magnets have been synthesized via rapid hot pressing and hot deformation processes. The highest (BH) max ∼10.6 MGOe was observed for a magnet with z=10. X-ray diffraction and M-H measurements indicated that the easy magnetization direction of magnets prefers to be in the hot pressing direction. Transmission electron microscopy investigation confirmed that plastic deformation is an important route for forming magnetic anisotropy in the Sm-Co-type nanocomposite magnets. Some stripe and/or platelike patterns have been observed inside the nanograins (50-200 nm), which may present as twins, and stacking faults. The (0001) twins have been observed in the 2:17R phase

Goal Orientation Profiles, Academic Achievement and Well-Being of Adolescents in Greece

NARCIS (Netherlands)

Mastrotheodoros, S.; Talias, Michael A.; Motti-Stefanidi, Frosso

2018-01-01

Adolescents differ in the way they motivate themselves, and the way they choose, perceive, and approach their goals. Goal orientations have been proposed to be a significant aspect of individual differences. In general, some students aim at gaining a higher level of skills, whereas other students

Presenting the students’ academic achievement causal model based on goal orientation

Directory of Open Access Journals (Sweden)

EBRAHIM NASIRI

2017-10-01

Full Text Available Introduction: Several factors play a role in academic achievement, individual’s excellence and capability to do actions and tasks that the learner is in charge of in learning areas. The main goal of this study was to present academic achievement causal model based on the dimensions of goal orientation and learning approaches among the students of Medical Science and Dentistry courses in Guilan University of Medical Sciences in 2013. Methods: This study is based on a cross-sectional model. The participants included 175 first and second year students of the Medical and Dentistry schools in Guilan University of Medical Sciences selected by random cluster sampling [121 persons (69% Medical Basic Science students and 54 (30.9% Dentistry students]. The measurement tool included the Goal Orientation Scale of Bouffard and Study Process Questionnaire of Biggs and the students’ Grade Point Average. The study data were analyzed using Pearson correlation coefficient and structural equations modeling. SPSS 14 and Amos were used to analyze the data. Results: The results indicated a significant relationship between goal orientation and learning strategies (P<0.05. In addition, the results revealed that a significant relationship exists between learning strategies [Deep Learning (r=0.37, P<0.05, Surface Learning (r=-0.21, P<0.05], and academic achievement. The suggested model of research is fitted to the data of the research. Conclusion: Results showed that the students’ academic achievement model fits with experimental data, so it can be used in learning principles which lead to students’ achievement in learning.

Stability and change in teachers' goal orientation profiles over time : Managerial coaching behavior as a predictor of profile change

NARCIS (Netherlands)

Kunst, E.M.; van Woerkom, M.; van Kollenburg, G.H.; Poell, R.F.

2018-01-01

Goal orientation is an important predictor of motivation at work. This study introduces goal orientation profiles in the work domain, evaluates their stability over time and assesses the impact of managerial coaching behavior on change in employees' goal orientation profiles. We hypothesize that

Social value orientation, organizational goal concerns and interdepartmental problem solving

NARCIS (Netherlands)

Nauta, A.; de Dreu, C.K.W.; van der Vaart, T.

2002-01-01

In a study of 11 organizations among 120 manufacturing, planning and sales employees, support was found for the hypothesis that a prosocial value orientation - as a personality trait - increases the likelihood that employees show a high concern for the goals of other departments. This concern,

Combining goal-oriented and model-driven approaches to solve the Payment Problem Scenario

NARCIS (Netherlands)

Asuncion, C.H.; Quartel, Dick; Pokraev, S.; Iacob, Maria Eugenia; van Sinderen, Marten J.

2010-01-01

Motivated by the objective to provide an improved participation of business domain experts in the design of service-oriented integration solutions, we extend our previous work on using the COSMO methodology for service mediation by introducing a goal-oriented approach to requirements engineering.

Relationships among goal orientations, motivational climate and flow in adolescent athletes: differences by gender.

Science.gov (United States)

Moreno Murcia, Juan Antonio; Cervelló Gimeno, Eduardo; González-Cutre Coll, David

2008-05-01

The purpose of this investigation was to examine the relationships among perceived motivational climate, individuals' goal orientations, and dispositional flow, with attention to possible gender differences. A sample of 413 young athletes, ages 12 to 16 years, completed the Perceived Motivational Climate in Sport Questionnaire-2 (PMCSQ-2) and Perception of Success Questionnaire (POSQ), as well as the Dispositional Flow Scale. Task orientation was positively and significantly related to a perceived task-involving motivational climate and to the disposition to experience flow in the sport. Ego orientation was positively and significantly associated with a perceived ego-involving motivational climate and with dispositional flow. The perceptions of task-involving and ego-involving motivational climates were positively and significantly linked to general dispositional flow. Multiple regression analysis indicated that both task and ego goal orientations and perceived task- and ego-oriented climates predicted dispositional flow. Males displayed a stronger ego orientation, and were more likely to report that they participated in an ego-oriented climate, than did females. To the contrary, the females were more likely to perceive a task-oriented climate than did the males. No meaningful differences were found between males and females in general dispositional flow.

Instructional characteristics in mathematics classrooms: relationships to achievement goal orientation and student engagement

Science.gov (United States)

Lazarides, Rebecca; Rubach, Charlott

2017-02-01

This longitudinal study examined relationships between student-perceived teaching for meaning, support for autonomy, and competence in mathematic classrooms (Time 1), and students' achievement goal orientations and engagement in mathematics 6 months later (Time 2). We tested whether student-perceived instructional characteristics at Time 1 indirectly related to student engagement at Time 2, via their achievement goal orientations (Time 2), and, whether student gender moderated these relationships. Participants were ninth and tenth graders (55.2% girls) from 46 classrooms in ten secondary schools in Berlin, Germany. Only data from students who participated at both timepoints were included (N = 746 out of total at Time 1 1118; dropout 33.27%). Longitudinal structural equation modeling showed that student-perceived teaching for meaning and support for competence indirectly predicted intrinsic motivation and effort, via students' mastery goal orientation. These paths were equivalent for girls and boys. The findings are significant for mathematics education, in identifying motivational processes that partly explain the relationships between student-perceived teaching for meaning and competence support and intrinsic motivation and effort in mathematics.

Goal orientation profile differences on perceived motivational climate, perceived peer relationships, and motivation-related responses of youth athletes.

Science.gov (United States)

Smith, Alan L; Balaguer, Isabel; Duda, Joan L

2006-12-01

The aims of this study were twofold: (a) to determine if dispositional achievement goal orientation profiles that are reported in the literature would be observed in a sample of youth athletes, and (b) to examine potential achievement goal orientation profile differences on perceptions of the motivational climate, perceptions of peer relationships, and motivation-related responses. Male soccer players (n=223) aged 9-12 years (mean=10.9, s=0.6) completed a multi-section questionnaire containing assessments of dispositional goal (task, ego) orientations, the perceived task- and ego-involving features of the motivational climate, perceived peer acceptance and friendship quality (positive friendship quality, conflict), perceived ability, soccer enjoyment, and satisfaction with one's performance and the team. Four profiles were observed that closely matched those observed by Hodge and Petlichkoff (2000), though in the present study a lower proportion of participants exhibited achievement goal profiles consisting of relatively high ego orientation. Achievement goal profile differences were found for all variables except positive friendship quality, with a general trend for those reporting relatively lower task goal orientation to exhibit less adaptive responses. Overall, the findings support achievement goal frameworks (e.g. Nicholls, 1989) and suggest that further examination of dispositional achievement goals may afford a deeper understanding of social relationships and motivational processes in youth sport.

Goal orientation and beliefs about causes of sport success among ...

African Journals Online (AJOL)

The purpose of this study was to investigate goal orientations (task and ego) and beliefs (effort, external factors, ability, and illegal advantage) and how these relate to success in sports competition for both National and International level athletes in Malaysia. The sample consisted of 100 male and female Malaysian athletes ...

The role of self-regulated strategies and goal orientation in predicting achievement of elementary school children

Directory of Open Access Journals (Sweden)

Anastasia Kitsantas

2009-10-01

Full Text Available The present study examined the predictiveness of self-regulated learning strategies and goal orientation of elementary students’ academic achievement. Eighty one (n = 81 fifth graders were asked to respond to two scales. It was hypothesized that student achievement would be predicted by prior achievement, use of self-regulation strategies, and goal orientation. Results showed that prior achievement and use of self-regulation strategies accounted for a significant amount of variance in students’ academic achievement. Overall, goal orientation was not a significant predictor of students’ outcomes measures across different subject areas. Areas for future research are explored and implications for school personnel are provided.

Relationship between goal orientation and perceived motivational climate in football players of different playing positions

Directory of Open Access Journals (Sweden)

Özkan ÇEKİÇ

2017-09-01

Full Text Available Aim: The aim of this study was to determine whether the characteristics of goal orientation and perceived motivational climate change according to the playing positions of amateur footballers. Material and Methods: Four hundred and sixty amateur male football players participated in the study (age, 21.72±4.63 years; football experience, 9.24±4.18 years. Footballers were named as the defence (n=199, midfield (n=187 and forward (n=74 according to their playing position. The scores of perceived motivational climate and goal orientation were determined by the Turkish versions of ‘The Task and Ego Orientation in Sport Questionnaire’ and ‘The Perceived Motivation Climate Questionnaire’, which were adopted by Toros (2002. Results: Pearson correlation analyses showed that football experience had no effect on task orientation, ego orientation, mastery climate, and performance climate. ANOVA and post-hoc Tukey tests showed that task orientation and mastery climate scores were higher in defence players than midfield players (p=0.003 vs. p<0.001. Ego orientation and performance climate scores of the midfield and defence players differed in favour of the midfield players (p<0.001 vs. p<0.001. Although there were no statistically significant differences in terms of the scores of task orientation and ego orientation among forward, defence, and midfield players, performance climate scores were higher in forward players than midfield players (p<0.001. Conclusion: According to the results of this study, players who have higher task orientation and mastery climate scores can play as defence players, and other players who have higher ego orientation and performance climate scores can play as midfield players. With the need for more extensive studies to determine the goal orientation and motivational climate scores of forward players, scores that are obtained from questionnaires should be evaluated with physical and physiological tests.

Goal orientations, perceived motivational climate, and motivational outcomes in football: A comparison between training and competition contexts

NARCIS (Netherlands)

Pol, P.K.C. van de; Kavussanu, M.; Ring, C.

2012-01-01

Objectives In this study, we examined (a) variability and (b) differences in football players’ goal orientations and perceptions of the motivational climate across training and competition contexts, and (c) whether the context moderates the relationships between goal orientations, motivational

Multisensory guidance of goal-oriented behaviour of legged robots

DEFF Research Database (Denmark)

Shaikh, Danish; Manoonpong, Poramate; Tuxworth, Gervase

2017-01-01

Biological systems often combine cues from two different sensory modalities to execute goal-oriented sensorimotor tasks, which otherwise cannot be accurately executed with either sensory stream in isolation. When auditory cues alone are not sufficient to accurately localise an audio-visual target...... is tasked with localising an audio-visual target by turning towards it. The architecture extracts sound direction information with a model of the peripheral auditory system of lizards to modulate locomotion control parameters driving the turning behaviour. The visual information adaptively changes...... the strength of the acoustomotor coupling to adjust turning speed of the robot. Our experiments demonstrate improved orientation towards the audio-visual target emitting a tone of frequency 2.2kHz located at an angular offset of 45 degrees from the robot....

The Functional Role of Resignation Orientation on Goal Engagement, Self-Esteem, Life Satisfaction, and Depression

OpenAIRE

Asano, Kenichi; Ishimura, Ikuo; Kodama, Masahiro

2014-01-01

Several studies in Europe and North America have highlighted the importance of resignation or giving up. Research has shown that resignation is as important as goal attainment. Hence, this study examines, using path analysis, the effect of resignation orientation on goal disengagement and reengagement. Furthermore, this study attempts to clarify the implication of resignation orientation for elements of mental well-being. Questionnaires were completed by 261 Japanese college students. Results...

An ultrasonic methodology to non-destructively estimate the grain orientation in an anisotropic weld

Directory of Open Access Journals (Sweden)

Wirdelius Håkan

2014-06-01

Full Text Available The initial step towards a non-destructive technique that estimates grain orientation in an anisotropic weld is presented in this paper. The purpose is to aid future forward simulations of ultrasonic NDT of this kind of weld to achieve a better result. A forward model that consists of a weld model, a transmitter model, a receiver model and a 2D ray tracing algorithm is introduced. An inversion based on a multi-objective genetic algorithm is also presented. Experiments are conducted for both P and SV waves in order to collect enough data used in the inversion. Calculation is conducted to fulfil the estimation with both the synthetic data and the experimental data. Concluding remarks are presented at the end of the paper.

Goal-oriented sensitivity analysis for lattice kinetic Monte Carlo simulations

International Nuclear Information System (INIS)

Arampatzis, Georgios; Katsoulakis, Markos A.

2014-01-01

In this paper we propose a new class of coupling methods for the sensitivity analysis of high dimensional stochastic systems and in particular for lattice Kinetic Monte Carlo (KMC). Sensitivity analysis for stochastic systems is typically based on approximating continuous derivatives with respect to model parameters by the mean value of samples from a finite difference scheme. Instead of using independent samples the proposed algorithm reduces the variance of the estimator by developing a strongly correlated-“coupled”- stochastic process for both the perturbed and unperturbed stochastic processes, defined in a common state space. The novelty of our construction is that the new coupled process depends on the targeted observables, e.g., coverage, Hamiltonian, spatial correlations, surface roughness, etc., hence we refer to the proposed method as goal-oriented sensitivity analysis. In particular, the rates of the coupled Continuous Time Markov Chain are obtained as solutions to a goal-oriented optimization problem, depending on the observable of interest, by considering the minimization functional of the corresponding variance. We show that this functional can be used as a diagnostic tool for the design and evaluation of different classes of couplings. Furthermore, the resulting KMC sensitivity algorithm has an easy implementation that is based on the Bortz–Kalos–Lebowitz algorithm's philosophy, where events are divided in classes depending on level sets of the observable of interest. Finally, we demonstrate in several examples including adsorption, desorption, and diffusion Kinetic Monte Carlo that for the same confidence interval and observable, the proposed goal-oriented algorithm can be two orders of magnitude faster than existing coupling algorithms for spatial KMC such as the Common Random Number approach. We also provide a complete implementation of the proposed sensitivity analysis algorithms, including various spatial KMC examples, in a supplementary

Goal-oriented sensitivity analysis for lattice kinetic Monte Carlo simulations.

Science.gov (United States)

Arampatzis, Georgios; Katsoulakis, Markos A

2014-03-28

In this paper we propose a new class of coupling methods for the sensitivity analysis of high dimensional stochastic systems and in particular for lattice Kinetic Monte Carlo (KMC). Sensitivity analysis for stochastic systems is typically based on approximating continuous derivatives with respect to model parameters by the mean value of samples from a finite difference scheme. Instead of using independent samples the proposed algorithm reduces the variance of the estimator by developing a strongly correlated-"coupled"- stochastic process for both the perturbed and unperturbed stochastic processes, defined in a common state space. The novelty of our construction is that the new coupled process depends on the targeted observables, e.g., coverage, Hamiltonian, spatial correlations, surface roughness, etc., hence we refer to the proposed method as goal-oriented sensitivity analysis. In particular, the rates of the coupled Continuous Time Markov Chain are obtained as solutions to a goal-oriented optimization problem, depending on the observable of interest, by considering the minimization functional of the corresponding variance. We show that this functional can be used as a diagnostic tool for the design and evaluation of different classes of couplings. Furthermore, the resulting KMC sensitivity algorithm has an easy implementation that is based on the Bortz-Kalos-Lebowitz algorithm's philosophy, where events are divided in classes depending on level sets of the observable of interest. Finally, we demonstrate in several examples including adsorption, desorption, and diffusion Kinetic Monte Carlo that for the same confidence interval and observable, the proposed goal-oriented algorithm can be two orders of magnitude faster than existing coupling algorithms for spatial KMC such as the Common Random Number approach. We also provide a complete implementation of the proposed sensitivity analysis algorithms, including various spatial KMC examples, in a supplementary MATLAB

Teachers' Goal Orientation Profiles and Participation in Professional Development Activities

Science.gov (United States)

Kunst, Eva M.; van Woerkom, Marianne; Poell, Rob F.

2018-01-01

Participation in professional development activities is important for teachers to continuously improve their knowledge and skills. However, teachers differ in their attitude towards learning activities. This paper examined how different goal orientation profiles are related to participation in professional development activities (acquiring…

Norwegian Football Academy Players-Players Self-Assessed Competence, Perfectionism, Goal Orientations and Motivational Climate

Directory of Open Access Journals (Sweden)

Eirik Nerland

2016-06-01

Full Text Available Grounded in the theoretical framework of achievement goal theory and perfectionism theory, the purpose of this study was to examine how self-assessed perceived abilities covariance these variables among Norwegian football academy players. 140 adolescent football players participated, representing three football academies. Perceived competence was reported as equivalent to or better than others. Perfectionism scores showed personal standards as the highest of the dimensions of perfectionism, while perceived parental pressure was lowest. In contrast, mean task orientation and perceived mastery climate were higher than ego orientation and perceived performance climate. The correlation analysis showed that perceived competence correlated positively with personal standards. Personal standards correlated positively with the rest of the perfectionism dimensions as well as ego orientation, perceived mastery- and performance climate. Concern over mistakes was positively correlated with ego-orientation. Overall, findings suggested that personal standards correlate with perceived competence, while these variables also relate to other perfectionism dimensions, goal orientations and perceived motivational climate. Therefore, coaches should highlight the importance of high personal standards, as a potentially maladaptive function on talent development.

Relationship between achievement goal orientations and the perceived purposes of playing rugby union for professional and amateur players.

Science.gov (United States)

Treasure, D C; Carpenter, P J; Power, K T

2000-08-01

The recent professionalization of rugby union makes it an excellent achievement context in which to examine the relationship between achievement goal orientations and the perceived purposes of sport as a function of competitive standard. During the 1996-97 season, 73 professional and 106 amateur rugby players in England completed a series of questionnaires assessing their achievement goal orientations, beliefs about the purposes of rugby and demographic information. The results of a canonical correlation analysis revealed a conceptually coherent relationship between achievement goal orientations and purposes of rugby. Specifically, a high ego/moderate task orientation was positively related to fitness, aggression and financial remuneration as significant purposes of rugby. Professional players scored higher on those purposes of rugby related to aggression, financial remuneration and fitness, but lower on sportspersonship than amateur players. Professional players also reported higher task and ego goal orientations than amateur players. The findings are discussed in terms of the differences in lifestyle and motivation of professional and amateur rugby union players.

An anisotropic elasto-viscoplastic model for short-fiber reinforced polymers

NARCIS (Netherlands)

Amiri Rad, A.; Govaert, L.E.; van Dommelen, J.A.W.

2017-01-01

The influence of flow on the fiber orientation in injection molding of short-fiber composites leads to both anisotropy and inhomogeneity of the mechanical response. An anisotropic elasto-viscoplastic constitutive model is developed to capture the anisotropic and time-dependent behavior and

An Anisotropic Elasto-Viscoplastic Model for Short-Fiber Reinforced Polymers

NARCIS (Netherlands)

Amiri Rad, A.; Govaert, L.E.; van Dommelen, J.A.W.

2018-01-01

The influence of flow on the fiber orientation in injection molding of short-fiber composites leads to both anisotropy and inhomogeneity of the mechanical response. An anisotropic elasto-viscoplastic constitutive model is developed to capture the anisotropic and time-dependent behavior and

Individualism-Collectivism and the Role of Goal Orientation in Organizational Training

Science.gov (United States)

Rogers, Altovise; Spitzmueller, Christiane

2009-01-01

This research examines how individualism-collectivism and goal orientation impact training effectiveness through study of an internationally diverse sample of engineers who were undergoing technical training. In light of contemporary views of individualism-collectivism, we argue that collectivism will moderate the influence of learning and…

Social value orientation, organizational goal concerns and interdepartmental problem-solving behavior

NARCIS (Netherlands)

Nauta, A.; Dreu, C.K.W. de; Vaart, T. van der

2002-01-01

In a study of 11 organizations among 120 manufacturing, planning and sales employees, support was found for the hypothesis that a prosocial value orientation - as a personality trait - increases the likelihood that employees show a high concern for the goals of other departments. This concern,

Sound attenuation and absorption by anisotropic fibrous materials: Theoretical and experimental study

Science.gov (United States)

Bravo, Teresa; Maury, Cédric

2018-03-01

This paper describes analytical and experimental studies carried out to examine the attenuation and absorption properties of rigidly-backed fibrous anisotropic materials in contact with a uniform mean flow. The aim is to provide insights for the development of non-locally reacting wall-treatments able to dissipate the noise induced by acoustic excitations over in-duct or external lining systems. A model of sound propagation in anisotropic bulk-reacting liners is presented that fully accounts for anisotropic losses due to heat conduction, viscous dissipation and diffusion processes along and across the material fibres as well as for the convective effect of an external flow. The propagation constant for the least attenuated mode of the coupled system is obtained using a simulated annealing search method. The predicted acoustical performance is validated in the no-flow case for a wide range of fibre diameters. They are assessed against impedance tube and free-field pressure-velocity measurements of the normal incidence absorption coefficient and surface impedance. Parametric studies are then conducted to determine the key constitutive parameters such as the fibres orientation or the amount of anisotropy that mostly influence the axial attenuation or the normal absorption. They are supported by a low-frequency approximation to the axial attenuation under a low-speed flow.

Social value orientation, organizational goal concerns and interdepartmental problem-solving behavior

NARCIS (Netherlands)

Nauta, A; De Dreu, CKW; Van der Vaart, T

In a study of 11 organizations among 120 manufacturing, planning and sales employees, support was found for the hypothesis that a prosocial value orientation-as a personality trait-increases the likelihood that employees show a high concern for the goals of other departments. This concern, combined

Social value orientation, organizational goal concerns and interdepartmental problem-solving behavior

NARCIS (Netherlands)

Nauta, A.; Dreu, C.K.W. de; Vaart, T. van der

2001-01-01

In a study in 11 organizations among 120 manufacturing, planning and sales employees, support was found for the hypothesis that a prosocial value orientation – as a personality trait -increases the likelihood that employees show a high concern for the goals of other departments. This concern,

Goal orientations and sport motivation, differences between the athletes of competitive and non-competitive rhythmic gymnastics.

Science.gov (United States)

Koumpoula, M; Tsopani, D; Flessas, K; Chairopoulou, C

2011-09-01

The present study examines the sport motivation and the goal orientations in the competitive and non-competitive structure of rhythmic gymnastics. Participation of individuals in one or the other structure of the sport differs in line with the goals they want to achieve and possibly also with respect to the factors that impulse them to take part in one or the other. The purpose of this study is to examine how individuals who participate in different structures of the sport of rhythmic gymnastics differentiate with regard to the type of motivation (intrinsic, extrinsic, amotivation) and goal orientations. The study involved 98 young female rhythmic gymnastics athletes (aged 14 years and up), out of which 40 were athletes of competitive clubs or members of national teams, and 58 were athletes of non-competitive clubs. For the evaluation of motivation and goal orientations the following tools were used: the Sport Motivation Scale (SMS) and the Task and Ego Orientation in Sport Questionnaire (TEOSQ). Descriptive and inductive statistical data analysis was conducted. The results showed that the athletes of the non-competitive structure presented higher levels of introjected regulation (extrinsic motivation), amotivation and lower levels of ego orientation (PRhythmic gymnastics athletes' (regardless of the structure of the sport) presented high level in task orientation while the high levels of task orientation is positively associated with high levels of intrinsic motivation regardless of the levels of ego orientation. The intrinsic motivation of athletes participating in rhythmic gymnastics runs at high levels. The amotivation of rhythmic gymnastics athletes' is a phenomenon which is also presented in the the non-competitive sport structure. It is important that the two different structures of sports be determined with accurate criteria.

Measurement of Anisotropic Particle Interactions with Nonuniform ac Electric Fields.

Science.gov (United States)

Rupp, Bradley; Torres-Díaz, Isaac; Hua, Xiaoqing; Bevan, Michael A

2018-02-20

Optical microscopy measurements are reported for single anisotropic polymer particles interacting with nonuniform ac electric fields. The present study is limited to conditions where gravity confines particles with their long axis parallel to the substrate such that particles can be treated using quasi-2D analysis. Field parameters are investigated that result in particles residing at either electric field maxima or minima and with long axes oriented either parallel or perpendicular to the electric field direction. By nonintrusively observing thermally sampled positions and orientations at different field frequencies and amplitudes, a Boltzmann inversion of the time-averaged probability of states yields kT-scale energy landscapes (including dipole-field, particle-substrate, and gravitational potentials). The measured energy landscapes show agreement with theoretical potentials using particle conductivity as the sole adjustable material property. Understanding anisotropic particle-field energy landscapes vs field parameters enables quantitative control of local forces and torques on single anisotropic particles to manipulate their position and orientation within nonuniform fields.

Obtuse triangle suppression in anisotropic meshes

KAUST Repository

Sun, Feng; Choi, Yi King; Wang, Wen Ping; Yan, Dongming; Liu, Yang; Lé vy, Bruno L.

2011-01-01

Anisotropic triangle meshes are used for efficient approximation of surfaces and flow data in finite element analysis, and in these applications it is desirable to have as few obtuse triangles as possible to reduce the discretization error. We present a variational approach to suppressing obtuse triangles in anisotropic meshes. Specifically, we introduce a hexagonal Minkowski metric, which is sensitive to triangle orientation, to give a new formulation of the centroidal Voronoi tessellation (CVT) method. Furthermore, we prove several relevant properties of the CVT method with the newly introduced metric. Experiments show that our algorithm produces anisotropic meshes with much fewer obtuse triangles than using existing methods while maintaining mesh anisotropy. © 2011 Elsevier B.V. All rights reserved.

Obtuse triangle suppression in anisotropic meshes

KAUST Repository

Sun, Feng

2011-12-01

Anisotropic triangle meshes are used for efficient approximation of surfaces and flow data in finite element analysis, and in these applications it is desirable to have as few obtuse triangles as possible to reduce the discretization error. We present a variational approach to suppressing obtuse triangles in anisotropic meshes. Specifically, we introduce a hexagonal Minkowski metric, which is sensitive to triangle orientation, to give a new formulation of the centroidal Voronoi tessellation (CVT) method. Furthermore, we prove several relevant properties of the CVT method with the newly introduced metric. Experiments show that our algorithm produces anisotropic meshes with much fewer obtuse triangles than using existing methods while maintaining mesh anisotropy. © 2011 Elsevier B.V. All rights reserved.

Goal-oriented Balancing: a New Model of Contemporary Sales Management

Directory of Open Access Journals (Sweden)

Lars-Johan Åge

2014-12-01

Full Text Available This study focuses on the substantive area of sales management and it suggests that the main concern of a sales manager is to reach the sales and economical goals of the sales organization. The social process by which this main concern is resolved is called goal-oriented balancing and it describes two complementary organizational dimensions, frame development and individual development that are continuously balanced against each other. That is, the sales manager must establish effective organizational processes and structures as well as find the keys to maximum individual performance. These two processes have to be in balance and supportive of each other.

Self-Regulation and Problem Solving Ability in 7E-Learning Cycle Based Goal Orientation

Science.gov (United States)

Mulyono; Noor, N. L.

2017-04-01

Goal orientation differences between mastery goals and performance goals can be a cause of high and low self-regulation and problem-solving abilities. To overcome these problems applied 7E-learning cycle in which students learn and develop ways to optimise the power of reason through the learning phase elicit, engage, explore, explain, elaborate, evaluate, and extend. This study aimed to test the effectiveness of learning by 7E-learning cycle and describe self-regulation and mathematics problem solving based on goal-orientation after the implementation 7E-learning cycle. This study used mix method design with research subject is graders XII sciences MA NU Nurul Ulum Jekulo Kudus which divided into goal orientation is mastery goal and performance goal. The independent variable of this research is learning model, while the dependent variable is problem solving and self-regulation. Then, collecting data using scale, interviews and tests. The data processed with the proportion of test, t-test, paired samples t-test, and Normality-gain. The results show problem-solving abilities of students through 7E-learning cycle the average of mathematical problem-solving capability class, self-regulation at 7E-learning cycle is better than the traditional model study. The problem-solving skills at 7E-learning cycle are better than the traditional model study, there is an increase in self-regulation through 7E-learning cycle of 0.4 (medium), and there is an increased problem-solving ability through 7E-learning cycle by 0.79 (high). Based on the qualitative analysis, self-regulation and problem-solving ability after the implementation of 7E-learning cycle students of a mastery goal group are better than the performance goal team. It is suggested to implement 7E-learning cycle to improve self-regulation and problem-solving ability as well as directing and fostering mastery goal on the student in the learning process.

Sex differences in goal orientation in adolescents aged 10-19: The older boys adopt work-avoidant goals twice as often as girls

NARCIS (Netherlands)

Dekker, Sanne; Krabbendam, Lydia; Lee, Nikki; Boschloo, Annemarie; De Groot, Renate; Jolles, Jelle

2012-01-01

Dekker, S. J., Krabbendam, L., Lee, N. C., Boschloo, A. M., De Groot, R. H. M., & Jolles, J. (2013). Sex differences in goal orientation in adolescents aged 10-19: The older boys adopt work-avoidant goals twice as often as girls. Learning and Individual Differences, 26, 196-200.

A Novel Goal-Oriented Approach for Training Older Adult Computer Novices: Beyond the Effects of Individual-Difference Factors.

Science.gov (United States)

Hollis-Sawyer, Lisa A.; Sterns, Harvey L.

1999-01-01

Spreadsheet training using either goal-oriented or verbal persuasion approach was given to 106 computer novices aged 50-89. Goal orientation achieved more changes in computer attitudes, efficacy, and proficiency. Intellectual ability and personality dimensions did not affect results. (SK)

Dominant Goal Orientations Predict Differences in Academic Achievement during Adolescence through Metacognitive Self-Regulation

NARCIS (Netherlands)

Dekker, Sanne; Krabbendam, Lydia; Lee, Nikki; Boschloo, Annemarie; De Groot, Renate; Jolles, Jelle

2016-01-01

This study investigated whether academic achievement was predicted by the goal which generally drives a student’s learning behaviour. Secondly, the role of metacognitive self-regulation was examined. The dominant goal orientation was assessed using a new method. 735 adolescents aged 10-19 years read

Micromechanics model for predicting anisotropic electrical conductivity of carbon fiber composite materials

Science.gov (United States)

Haider, Mohammad Faisal; Haider, Md. Mushfique; Yasmeen, Farzana

2016-07-01

Heterogeneous materials, such as composites consist of clearly distinguishable constituents (or phases) that show different electrical properties. Multifunctional composites have anisotropic electrical properties that can be tailored for a particular application. The effective anisotropic electrical conductivity of composites is strongly affected by many parameters including volume fractions, distributions, and orientations of constituents. Given the electrical properties of the constituents, one important goal of micromechanics of materials consists of predicting electrical response of the heterogeneous material on the basis of the geometries and properties of the individual phases, a task known as homogenization. The benefit of homogenization is that the behavior of a heterogeneous material can be determined without resorting or testing it. Furthermore, continuum micromechanics can predict the full multi-axial properties and responses of inhomogeneous materials, which are anisotropic in nature. Effective electrical conductivity estimation is performed by using classical micromechanics techniques (composite cylinder assemblage method) that investigates the effect of the fiber/matrix electrical properties and their volume fractions on the micro scale composite response. The composite cylinder assemblage method (CCM) is an analytical theory that is based on the assumption that composites are in a state of periodic structure. The CCM was developed to extend capabilities variable fiber shape/array availability with same volume fraction, interphase analysis, etc. The CCM is a continuum-based micromechanics model that provides closed form expressions for upper level length scales such as macro-scale composite responses in terms of the properties, shapes, orientations and constituent distributions at lower length levels such as the micro-scale.

The Relationship Between Goal Orientation, Social Comparison Responses, Self-Efficacy, and Performance

NARCIS (Netherlands)

Carmona, Carmen; Buunk, Abraham P.; Dijkstra, Arie; Peiro, Jose M.

2008-01-01

The present study examined whether social comparison responses (identification and contrast in social comparison) mediated the relationship between goal orientation (promotion and prevention) and self-efficacy, and whether self-efficacy was subsequently related with a better performance. As

A structural model of goal orientation in sports: personal and contextual variables.

Science.gov (United States)

Holgado Tello, Francisco Pablo; Navas Martínez, Leandro; López Núñez, Manuela; García Calvo, Tomás

2010-05-01

The following paper first introduces, and then goes on to test a structural model for goal orientation in sports that involves both personal and contextual variables. 511 subjects participated in this study, male and female athletes who play a variety of sports (352 men and 159 women). They ranged in age from 16 to 45-years old and completed the TEOSQ (Balaguer, Tomás & Castillo's version, 1995), the POSQ (Treasure & Roberts, 1994), the PMCSQ-II (Newton & Duda, 1993), the Beliefs about the Causes of Success in Sports Questionnaire, and the Participation Motivation Inventory (Gill, Goss & Huddleston, 1983). The results of this sample show that success attribution and motivational climate are involved in determining goal orientation in sports. However, the model does present certain differences according to the type of sport practiced (individual versus team sport).

Goal Orientation among Boys and Girls in Higher Secondary Schools of Kerala: How Parenting Styles Influence It?

Science.gov (United States)

Gafoor, Kunnathodi Abdul; Kurukkan, Abidha

2014-01-01

The purpose of the study is to investigate the relation between parenting style and goal orientation among boys and girls in higher secondary schools of Kerala. Four types of parenting style and five categories of goal orientation. The sample comprised of 467 girls and 365 boys from higher secondary school in Kerala who were selected through…

Self-force on dislocation segments in anisotropic crystals

International Nuclear Information System (INIS)

Fitzgerald, S P; Aubry, S

2010-01-01

A dislocation segment in a crystal experiences a 'self-force', by virtue of the orientation dependence of its elastic energy. If the crystal is elastically isotropic, this force is manifested as a couple acting to rotate the segment toward the lower energy of the pure screw orientation (i.e. acting to align the dislocation line with its Burgers vector). If the crystal is anisotropic, there are additional contributions to the couple, arising from the more complex energy landscape of the lattice itself. These effects can strongly influence the dynamic evolution of dislocation networks, and via their governing role in dislocation multiplication phenomena, control plastic flow in metals. In this paper we develop a model for dislocation self-forces in a general anisotropic crystal, and briefly consider the technologically important example of α-iron, which becomes increasingly anisotropic as the temperature approaches that of the α-γ phase transition at 912 0 C.

Global self-esteem, goal achievement orientations, and self-determined behavioural regulations in a physical education setting.

Science.gov (United States)

Hein, Vello; Hagger, Martin S

2007-01-15

We examined a theoretical model of global self-esteem that incorporated constructs from achievement goal and self-determination theories. The model hypothesized that self-determined or autonomous motives would mediate the influence of achievement goal orientation on global self-esteem. The adapted version of the Behavioural Regulation in Exercise Questionnaire (Mullan et al., 1997), the Perception of Success Questionnaire (Roberts & Balague, 1991), and Rosenberg's (1965) self-esteem scales were administered to 634 high school students aged 11 - 15 years. A structural equation model supported the hypotheses and demonstrated that autonomous motives mediated the effect of goal orientations on global self-esteem. The results suggest that generalized motivational orientations influence self-esteem by affecting autonomous motivation and is consistent with theory that suggests that experiences relating to intrinsic motivation are the mechanism by which global motivational orientations are translated into adaptive outcomes like self-esteem. The findings suggest that physical activity interventions that target autonomous motives in physical activity contexts are likely to enhance young people's general self-esteem.

Comparing Three Models of Achievement Goals: Goal Orientations, Goal Standards, and Goal Complexes

Science.gov (United States)

Senko, Corwin; Tropiano, Katie L.

2016-01-01

Achievement goal theory (Dweck, 1986) initially characterized mastery goals and performance goals as opposites in a good-bad dualism of student motivation. A later revision (Harackiewicz, Barron, & Elliot, 1998) contended that both goals can provide benefits and be pursued together. Perhaps both frameworks are correct: Their contrasting views…

Goal orientations, beliefs about success, and performance improvement among young elite Dutch soccer players

NARCIS (Netherlands)

Van Yperen, Nico W.; Duda, Joan L.

1999-01-01

Extending past work testing goal perspective theory in sport, one purpose of this study was to examine, via a longitudinal design, the relationship of goal orientations to the beliefs about the causes of success in the case of elite male Dutch soccer players. A second purpose was to determine the

Does Goal Orientation Matter for Trait Anxiety, Self-Efficacy and Performance? An Investigation in University Athletes

Science.gov (United States)

Sari, Ihsan

2015-01-01

In recent years, goal orientations have been examined in their relationship with other potential determinants of athletic performance. The relevant research showed that task orientation, compared to ego orientation, is linked to more adaptive outcomes (Behzadi, Hamzei, Nori and Salehian, 2011; Duda and Whitehead, 1998; Roberts, 2001; Biddle, 2001;…

Colossal anisotropic resistivity and oriented magnetic domains in strained La{sub 0.325}Pr{sub 0.3}Ca{sub 0.375}MnO{sub 3} films

Energy Technology Data Exchange (ETDEWEB)

Jiang, Tao; Yang, Shengwei; Liu, Yukuai; Zhao, Wenbo; Feng, Lei; Li, Xiaoguang, E-mail: lixg@ustc.edu.cn [Hefei National Laboratory for Physical Sciences at Microscale, Department of Physics, University of Science and Technology of China, Hefei 230026 (China); Zhou, Haibiao; Lu, Qingyou [Hefei National Laboratory for Physical Sciences at Microscale, Department of Physics, University of Science and Technology of China, Hefei 230026 (China); High Magnetic Field Laboratory, Chinese Academy of Sciences and University of Science and Technology of China, Hefei 230031 (China); Hou, Yubin [High Magnetic Field Laboratory, Chinese Academy of Sciences and University of Science and Technology of China, Hefei 230031 (China)

2014-05-19

Magnetic and resistive anisotropies have been studied for the La{sub 0.325}Pr{sub 0.3}Ca{sub 0.375}MnO{sub 3} films with different thicknesses grown on low symmetric (011)-oriented (LaAlO{sub 3}){sub 0.3}(SrAl{sub 0.5}Ta{sub 0.5}O{sub 3}){sub 0.7} substrates. In the magnetic and electronic phase separation region, a colossal anisotropic resistivity (AR) of ∼10{sup 5}% and an anomalous large anisotropic magnetoresistance can be observed for 30 nm film. However, for 120 nm film, the maximum AR decreases significantly (∼2 × 10{sup 3}%) due to strain relaxation. The colossal AR is strongly associated with the oriented formation of magnetic domains, and the features of the strain effects are believed to be useful for the design of artificial materials and devices.

Consideration of learning orientations as an application of achievement goals in evaluating life science majors in introductory physics

Science.gov (United States)

Mason, Andrew J.; Bertram, Charles A.

2018-06-01

When considering performing an Introductory Physics for Life Sciences course transformation for one's own institution, life science majors' achievement goals are a necessary consideration to ensure the pedagogical transformation will be effective. However, achievement goals are rarely an explicit consideration in physics education research topics such as metacognition. We investigate a sample population of 218 students in a first-semester introductory algebra-based physics course, drawn from 14 laboratory sections within six semesters of course sections, to determine the influence of achievement goals on life science majors' attitudes towards physics. Learning orientations that, respectively, pertain to mastery goals and performance goals, in addition to a learning orientation that does not report a performance goal, were recorded from students in the specific context of learning a problem-solving framework during an in-class exercise. Students' learning orientations, defined within the context of students' self-reported statements in the specific context of a problem-solving-related research-based course implementation, are compared to pre-post results on physics problem-solving items in a well-established attitudinal survey instrument, in order to establish the categories' validity. In addition, mastery-related and performance-related orientations appear to extend to overall pre-post attitudinal shifts, but not to force and motion concepts or to overall course grade, within the scope of an introductory physics course. There also appears to be differentiation regarding overall course performance within health science majors, but not within biology majors, in terms of learning orientations; however, health science majors generally appear to fare less well on all measurements in the study than do biology majors, regardless of learning orientations.

Adolescent ethnic prejudice: understanding the effects of parental extrinsic versus intrinsic goal promotion.

Science.gov (United States)

Duriez, Bart

2011-01-01

Based on Self-Determination Theory, the role of parental extrinsic versus intrinsic (E / I) goal promotion for adolescent ethnic prejudice and the mechanisms underlying this effect were examined in a sample of adolescents and their parents. Results indicate that paternal and maternal E / I goal promotion had a significantly positive effect on ethnic prejudice. This effect could be accounted for by differences in adolescent right-wing authoritarianism (RWA) and social dominance orientation (SDO). In addition, differences in adolescent E / I goal pursuit fully mediated the effects of parental E / I goal promotion on RWA and SDO. Finally, the effects of adolescent E / I goal pursuits on ethnic prejudice were fully mediated by RWA and SDO. Implications of these findings will be discussed.

When big brother is watching: goal orientation shapes reactions to electronic monitoring during online training.

Science.gov (United States)

Watson, Aaron M; Foster Thompson, Lori; Rudolph, Jane V; Whelan, Thomas J; Behrend, Tara S; Gissel, Amanda L

2013-07-01

Web-based training is frequently used by organizations as a convenient and low-cost way to teach employees new knowledge and skills. As web-based training is typically unproctored, employees may be held accountable to the organization by computer software that monitors their behaviors. The current study examines how the introduction of electronic performance monitoring may provoke negative emotional reactions and decrease learning among certain types of e-learners. Through motivated action theory and trait activation theory, we examine the role of performance goal orientation when e-learners are exposed to asynchronous and synchronous monitoring. We show that some e-learners are more susceptible than others to evaluation apprehension when they perceive their activities are being monitored electronically. Specifically, e-learners higher in avoid performance goal orientation exhibited increased evaluation apprehension if they believed asynchronous monitoring was present, and they showed decreased skill attainment as a result. E-learners higher on prove performance goal orientation showed greater evaluation apprehension if they believed real-time monitoring was occurring, resulting in decreased skill attainment. PsycINFO Database Record (c) 2013 APA, all rights reserved.

A theory for the anisotropic interaction between two substitutional magnetic impurities and the magnetic anisotropic effect in dilute magnetic alloys

International Nuclear Information System (INIS)

Satter, M.A.

1990-08-01

In this paper, a formalism for studying the anisotropic interaction between two substitutional magnetic impurities and the magnetic anisotropic effect in a dilute noble metal- transition metal magnetic alloy has been developed from relativistic scattering theory. The theoretical development and the computational techniques of this formalism are based on relativistic spin-polarized scattering theory and relativistic band structure frameworks. For studying the magnetic anisotropic effect a convenient ''working'' frame of reference with its axes oriented along the fcc crystal axes is set up. This formalism is applied to study the situation for two Fe impurities in paramagnetic Au hosts. For AuFe dilute alloy, the two impurity site interaction as a function of separation is not oscillatory and the anisotropic effect is found to be less than the two site interaction itself only by an order of magnitude. Apart from the anisotropic coupling of the two impurity spins to the separation vector, for the first time, another weak anisotropic coupling to the crystal axes is also contained in the two site interaction. These anisotropic effects are the results of the relativistic spin-orbit interaction which are incorporated into the formalism. (author). 22 refs, 5 figs

The relevance of goal-orientation for motivation in high versus low proneness to negative symptoms.

Science.gov (United States)

Schlier, Björn; Engel, Maike; Fladung, Anne-Katharina; Fritzsche, Anja; Lincoln, Tania M

2017-06-01

The psychological mechanisms of why individuals with negative symptoms fail to initiate and perform goal-directed behavior are not well understood. Drawing on the reward-sensitivity and expectancy-value theories, we investigate whether negative symptom-like experiences (NSLE) are associated with generating less approach goals (aimed at reaching a positive outcome) and more avoidance goals (aimed at avoiding a negative outcome) and whether this type of goal-orientation explains motivational deficits (i.e., perceiving goals as less feasible and important and being less committed to them). Based on the continuum model of negative symptoms, we identified two parallelized extreme groups with high and low levels of NSLE (n = 37, respectively) in an ad-hoc online-sample of healthy individuals (N = 262) using the Community Assessment of Psychic Experiences. In an online study, these participants were instructed to generate approach and avoidance goals and to rate each goal in terms of feasibility, importance and goal-commitment. Participants with low levels of NSLE generated more approach than avoidance goals. Participants with high levels of NSLE showed no such difference due to increased numbers of avoidance goals. Furthermore, avoidance goal-orientation predicted reduced subjective feasibility and importance of goals and less goal-commitment. Results are based on a healthy sample rather than people with psychosis. No longitudinal or behavioral data for goal-striving was collected. People with NSLE generate more avoidance goals than controls. This is dysfunctional because it correlates with feeling less committed to reach one's goals. Optimizing goal-setting could be a promising starting-point for psychological interventions aimed at reducing negative symptoms. Copyright © 2017 Elsevier Ltd. All rights reserved.

A functional look at goal orientations : their role for self-estimates of intelligence and performance

NARCIS (Netherlands)

Bipp, T.; Steinmayr, R.; Spinath, B.

2012-01-01

Building on the notion that motivation energizes and directs resources in achievement situations, we argue that goal orientations affect perceptions of own intelligence and that the effect of goals on performance is partly mediated by self-estimates of intelligence. Studies 1 (n = 89) and 2 (n =

Relationships between Psychological Wellbeing of Thai College Students, Goal Orientations, and Gender

Science.gov (United States)

Sosik, John J.; Chun, Jae Uk; Koul, Ravinder

2017-01-01

This paper examined the direct and interaction effects of students' learning and performance-avoidance goal orientations on their psychological wellbeing and a moderating role of students' gender in these relationships. Using 564 self-reports of freshman college students in a Thai university, we found students' psychological wellbeing to be…

Understanding the emergence of state goal orientation in organizational work groups: the role of leadership and multilevel climate perceptions.

Science.gov (United States)

Dragoni, Lisa

2005-11-01

This article attends to a broad range of practically significant employee motivations and provides insight into how to enhance individual-level performance by examining individual-level state goal orientation emergence in organizational work groups. Leadership and multilevel climate processes are theorized to parallel each dimension of state goal orientation to cue and ultimately induce the corresponding achievement focus among individual work group members. It is argued that the patterns of leader behavior, which elucidate the leader's achievement priority, shape group members' psychological and work group climate to embody this priority. Resulting multilevel climate perceptions signal and compel group members to adopt the ascribed form of state goal orientation. The quality of the leader-member exchange relationship is viewed as a means to clarify leader messages in the formation of group members' psychological climate and internalize these cues in the emergence of state goal orientation. Considerations for future research and practice are discussed. ((c) 2005 APA, all rights reserved).

An autoethnographic exploration of the use of goal oriented feedback to enhance brief clinical teaching encounters.

Science.gov (United States)

Farrell, Laura; Bourgeois-Law, Gisele; Ajjawi, Rola; Regehr, Glenn

2017-03-01

Supervision in the outpatient context is increasingly in the form of single day interactions between students and preceptors. This creates difficulties for effective feedback, which often depends on a strong relationship of trust between preceptor and student. Building on feedback theories focusing on the relational and dialogic aspects of feedback, this study explored the use of goal-oriented feedback in brief encounters with learners. This study used autoethnography to explore one preceptor's feedback interactions over an eight-month period both in the ambulatory setting and on the wards. Data included written narrative reflections on feedback interactions with twenty-three learners informed by discussions with colleagues and repeated reading of feedback literature. Thematic and narrative analyses of data were performed iteratively. Data analysis emphasized four recurrent themes. (1) Goal discussions were most effective when initiated early and integrated throughout the learning experience. (2) Both learner and preceptor goals were multiple and varied, and feedback needed to reflect this complexity. (3) Negotiation or co-construction of goals was important when considering the focus of feedback discussions in order to create safer, more effective interactions. (4) Goal oriented interactions offer potential benefits to the learner and preceptor. Goal oriented feedback promotes dialogue as it requires both preceptor and learner to acknowledge and negotiate learning goals throughout their interaction. In doing so, feedback becomes an explicit component of the preceptor-learner relationship. This enhances feedback interactions even in relatively brief encounters, and may begin an early educational alliance that can be elaborated with longer interactions.

How to become more entrepreneurial? : The role of identity in entrepreneurial goal orientation

NARCIS (Netherlands)

Clarysse, Bart; van Boxstael, A.; Humphreys, John

2016-01-01

In this study, we analyze how social identification and role identity salience interplay and explain the entrepreneurial goal orientation of founder-owners of professional home nursing practices. First, we show how social identification with particular communities (i.e. professional

Transformational Leadership, Transactional Contingent Reward, and Organizational Identification: The Mediating Effect of Perceived Innovation and Goal Culture Orientations.

Science.gov (United States)

Xenikou, Athena

2017-01-01

Purpose: The aim of this research was to investigate the effect of transformational leadership and transactional contingent reward as complementary, but distinct, forms of leadership on facets of organizational identification via the perception of innovation and goal organizational values. Design/Methodology/Approach: Three studies were carried out implementing either a measurement of mediation or experimental-causal-chain design to test for the hypothesized effects. Findings: The measurement of mediation study showed that transformational leadership had a positive direct and indirect effect, via innovation value orientation, on cognitive identification, whereas transactional contingent reward was more strongly related to affective, rather than cognitive, identification, and goal orientation was a mediator of their link. The findings of the two experimental-causal-chain studies further supported the hypothesized effects. Transformational leadership was found to lead subordinates to perceive the culture as more innovative compared to transactional contingent reward, whereas transactional contingent reward led employees to perceive the culture as more goal, than innovation, oriented. Finally, innovation, compared to goal, value orientation increased cognitive identification, while goal orientation facilitated affective, rather than cognitive, identification. Implications: The practical implications involve the development of strategies organizations can apply, such as leadership training programs, to strengthen their ties with their employees, which, in turn, may have a positive impact on in-role, as well as extra-role, behaviors. Originality/Value: The originality of this research concerns the identification of distinct mechanisms explaining the effect of transformational leadership and transactional contingent reward on cognitive and affective identification applying an organizational culture perspective and a combination of measurement and causal mediation designs.

The company they keep and avoid: social goal orientation as a predictor of children's ethnic segregation.

Science.gov (United States)

Wilson, Travis M; Rodkin, Philip C; Ryan, Allison M

2014-04-01

This study examined whether social goal orientation (i.e., demonstration-approach, demonstration-avoid, and social development goals) predicts changes in ethnic segregation among 4th and 5th grade African American and European American children (n = 713, ages 9-11 years) from fall to spring. Segregation measures were (a) same-ethnicity favoritism in friendships, (b) same-ethnicity favoritism in peer group affiliations, and (c) cross-ethnicity dislike. Social goal orientation was asymmetrically associated with ethnic segregation for the 2 groups. Among African Americans, aspiring to achieve high social status predicted increases in same-ethnicity favoritism and cross-ethnicity dislike. Among European Americans, aspiring to achieve high social status predicted decreases in same-ethnicity favoritism. PsycINFO Database Record (c) 2014 APA, all rights reserved.

College Students' Goal Orientations, Situational Motivation and Effort/Persistence in Physical Activity Classes

Science.gov (United States)

Gao, Zan; Podlog, Leslie W.; Harrison, Louis

2012-01-01

The purpose of this study was to examine relationships among college students' 2 x 2 goal orientations (mastery-approach [MAp], mastery-avoidance [MAv], performance-approach [PAp], performance-avoidance [PAv]), situational motivation (intrinsic motivation, identified regulation, external regulation and amotivation) and effort/persistence in…

Motivation and performance within a collaborative computer-based modeling task: Relations between students' achievement goal orientation, self-efficacy, cognitive processing and achievement

OpenAIRE

Sins, P.H.M.; van Joolingen, W.R.; Savelsbergh, E.R.; van Hout-Wolters, B.H.A.M.

2008-01-01

Purpose of the present study was to test a conceptual model of relations among achievement goal orientation, self-efficacy, cognitive processing, and achievement of students working within a particular collaborative task context. The task involved a collaborative computer-based modeling task. In order to test the model, group measures of mastery-approach goal orientation, performance-avoidance goal orientation, self-efficacy, and achievement were employed. Students’ cognitive processing was a...

Plane-wave diffraction by periodic structures with artificial anisotropic dielectrics

International Nuclear Information System (INIS)

Kazerooni, Azadeh Semsar; Shahabadi, Mahmoud

2010-01-01

Periodic structures with artificial anisotropic dielectrics are studied. The artificial anisotropic dielectric material in this work is made of two alternating isotropic dielectric layers. By a proper choice of the dielectric constant of the layers, we can realize a uniaxial anisotropic medium with controllable anisotropy. The artificial anisotropic dielectric is then used in periodic structures. For these structures, the optical axis of the artificial dielectric is assumed to be parallel or perpendicular to the period of the structure. Diffraction of plane waves by these structures is analyzed by a fully vectorial rigorous matrix method based on a generalized transmission line (TL) formulation. The propagation constants and field distributions are computed and diffraction properties of such structures are studied to show that, by a proper choice of structural parameters, these periodic structures with artificial anisotropic dielectrics can be used as polarizers or polarizing mirrors

Transformational Leadership, Transactional Contingent Reward, and Organizational Identification: The Mediating Effect of Perceived Innovation and Goal Culture Orientations

Science.gov (United States)

Xenikou, Athena

2017-01-01

Purpose: The aim of this research was to investigate the effect of transformational leadership and transactional contingent reward as complementary, but distinct, forms of leadership on facets of organizational identification via the perception of innovation and goal organizational values. Design/Methodology/Approach: Three studies were carried out implementing either a measurement of mediation or experimental-causal-chain design to test for the hypothesized effects. Findings: The measurement of mediation study showed that transformational leadership had a positive direct and indirect effect, via innovation value orientation, on cognitive identification, whereas transactional contingent reward was more strongly related to affective, rather than cognitive, identification, and goal orientation was a mediator of their link. The findings of the two experimental-causal-chain studies further supported the hypothesized effects. Transformational leadership was found to lead subordinates to perceive the culture as more innovative compared to transactional contingent reward, whereas transactional contingent reward led employees to perceive the culture as more goal, than innovation, oriented. Finally, innovation, compared to goal, value orientation increased cognitive identification, while goal orientation facilitated affective, rather than cognitive, identification. Implications: The practical implications involve the development of strategies organizations can apply, such as leadership training programs, to strengthen their ties with their employees, which, in turn, may have a positive impact on in-role, as well as extra-role, behaviors. Originality/Value: The originality of this research concerns the identification of distinct mechanisms explaining the effect of transformational leadership and transactional contingent reward on cognitive and affective identification applying an organizational culture perspective and a combination of measurement and causal mediation designs

Exploring Students' Reflective Thinking Practice, Deep Processing Strategies, Effort, and Achievement Goal Orientations

Science.gov (United States)

Phan, Huy Phuong

2009-01-01

Recent research indicates that study processing strategies, effort, reflective thinking practice, and achievement goals are important factors contributing to the prediction of students' academic success. Very few studies have combined these theoretical orientations within one conceptual model. This study tested a conceptual model that included, in…

The impact of goal-oriented task design on neurofeedback learning for brain-computer interface control.

Science.gov (United States)

McWhinney, S R; Tremblay, A; Boe, S G; Bardouille, T

2018-02-01

Neurofeedback training teaches individuals to modulate brain activity by providing real-time feedback and can be used for brain-computer interface control. The present study aimed to optimize training by maximizing engagement through goal-oriented task design. Participants were shown either a visual display or a robot, where each was manipulated using motor imagery (MI)-related electroencephalography signals. Those with the robot were instructed to quickly navigate grid spaces, as the potential for goal-oriented design to strengthen learning was central to our investigation. Both groups were hypothesized to show increased magnitude of these signals across 10 sessions, with the greatest gains being seen in those navigating the robot due to increased engagement. Participants demonstrated the predicted increase in magnitude, with no differentiation between hemispheres. Participants navigating the robot showed stronger left-hand MI increases than those with the computer display. This is likely due to success being reliant on maintaining strong MI-related signals. While older participants showed stronger signals in early sessions, this trend later reversed, suggesting greater natural proficiency but reduced flexibility. These results demonstrate capacity for modulating neurofeedback using MI over a series of training sessions, using tasks of varied design. Importantly, the more goal-oriented robot control task resulted in greater improvements.

Analysis of self-determined motivation in basketball players through goal orientations.

Science.gov (United States)

Gómez-López, Manuel; Granero-Gallegos, Antonio; Abraldes, J Arturo; Rodríguez-Suárez, Nuria

2013-09-01

The purpose of this study was twofold. Firstly to examine the relations between the different constructs that defines Nicholls' Achievement Goal Theory and Deci and Ryan's self-determination theory. Secondly to analyse the differences that exist between them with respect to the socio-demographic variables gender and age. A sample of 292 federated basketball players from the Region of Murcia (Spain) with ages between 14 and 18 years old was used. In addition, Castilian versions of The Perception of Success Questionnaire (POSQ) and the Sports Motivational Scale (SMS) were administered. Three statistical analyses were employed, a descriptive analysis, a correlation analysis and a regression analysis. The results showed a positive relation between ego orientation, extrinsic motivation and amotivation. The motivational relations between both theories and the differences with respect to gender and age are discussed. We have found out that mainly gender and also age differences are strong predictors of ego orientation, extrinsic motivation of external regulation and amotivation. We can also confirm that extrinsic motivation of external regulation positively predicts ego orientation and a decrease of task orientation. The results ratify the use of the Spanish version of the SMS to measure different types of motivation within the sports context.

Classroom Displays as a Tool for Evaluating Young Learners’ Goal-Attainment

DEFF Research Database (Denmark)

aus der Wieschen, Maria Vanessa

In Danish primary schools, each class has their own classroom in which they have (almost) all of their classes, making the walls ideal learning spaces. However, this also means that English as a Foreign Language (EFL) teachers have to share the classroom walls with their colleagues who teach other...... subjects in the same classroom, which limits the available EFL learning space. The present study examines in what way English teachers and young learners do (not) make meaningful use of EFL material on classroom walls as part of goal-oriented teaching and learning (læringsmålstyret undervisning. Using...... displays can be used as a tool in goal- oriented teaching and learning, in that they (1) work as a documentation of achieved and current goals for learning (læringsmål), (2) help students who have not fully achieved the past goals for learning to participate in current learning activities...

How Learning Goal Orientation Fosters Leadership Recognition in Self-managed Teams

DEFF Research Database (Denmark)

Lee, Yih-Teen; Paunova, Minna

2017-01-01

understudied. Drawing on social exchange theory, we propose and test an individual-level two-stage process model of generalised exchange linking LGO and leadership recognition in self-managed teams. Specifically, we posit that learning-oriented individuals will tend to feel safer in self-managed teams, which......Defined as a mental framework for how individuals interpret and respond to achievement situations, learning goal orientation (LGO) has received increasing attention in organisational research. However, its effect on leadership, especially in contexts absent of formal leadership, remains......, but that contextual role behavior alone does not mediate the effect of LGO on leadership recognition. LGO has an indirect effect on leadership recognition through the joint mediation of felt safety and contextual role behavior. Our results offer insight on the link between LGO and leadership, with practical...

Goal orientation as a motivation model and self-confidence among tennis players of different levels of success

Directory of Open Access Journals (Sweden)

Lepir Duško

2014-01-01

Full Text Available The goal of this research was to determine differences between the successful and less successful tennis players regarding their goal orientation and self-confidence, as well as to examine the correlation between these two psychological constructs. Active male tennis players (N=40, ranked on the senior list of the Tennis Federation of Austria, age 18 to 26, filled in the TEOSQ-D1 questionnaire (Würth, Alfermann and Saborowski, 1999, and CSI questionnaire (Vealey, 1986, just before the national senior championship of Austria. After categorising a 'successful tennis player' as one ranked in top 100 (N=20, and a 'less successful' one as ranked outside top 100 (N=20, analyses of their differences concerning goal orientation and self-confidence were conducted by means of the T-test, but no statistically significant differences were found for any scale. Pearson's coefficient for the entire sample showed that task orientation correlate significantly with the sport confidence trait (r= 0,451; Sig.= 0,05, and to a certain extent with sport-confidence as a state (r= 0,387; Sig.= 0,092, but that correlation is not statistically significant at the level Sig.< 0,05. For the result/ego scale orientation, there were no significant correlations with sporting-confidence. Guidelines for future research are based on the development of a more adequate system for evaluation of success in sport, and also on increasing of sample size. This could be very helpful for making more reliable conclusions about the influence of goal orientation preference on sport-confidence and sport success, which could justify the utilization of this psychological construct for practical purposes.

The Roles of Competence Beliefs and Goal Orientations for Change in Intrinsic Motivation

Science.gov (United States)

Spinath, Birgit; Steinmayr, Ricarda

2012-01-01

The present study investigated 3 theoretically plausible explanations for changes in school-related intrinsic motivation. A sample of 348 German 11th-grade students was followed for 1 year. At 2 measurement occasions, students completed self-reports regarding their school-related intrinsic motivation, goal orientations, and competence beliefs. In…

Goal orientation and well-being in college athletes: The importance of athletic social connectedness.

Science.gov (United States)

Wayment, Heidi A; Walters, Andrew Schrack

2017-11-01

The present study examined the ability of an interpersonal construct called athletic connectedness to mediate the relationship between task and ego goal orientations and well-being. We operationalised athletic social connectedness as a sense of social belonging and sense of connection with teammates. We hypothesised that athletic social connectedness would be positively associated with task goals, negatively associated with ego goals, and would at least partially mediate the relationship between achievement goals and well-being. We administered questionnaires to female (N = 106; mean age = 20.47, SD = 1.12) and male (N = 100; mean age = 20.95, SD = 1.21) NCAA Division III college athletes. We tested our hypothesised model using structural equation modelling, which included testing a measurement model that specified four latent variables and then comparing the estimates generated by our hypothesised model with our data. We also tested three alternative models and found our hypothesised model to fit best. As predicted, there were significant indirect effects of task and ego motivation on well-being through athletic connectedness, demonstrating formal evidence of mediation. The r 2 coefficient indicated that the model explained 30% of the variance in well-being, a moderate effect size (Cohen, 1988). Discussion focuses on the importance of considering interpersonal constructs as a way to improve our understanding of relationship between task and ego goal orientations to well-being in athletes.

Workplace Learning within Teacher Education: The Role of Job Characteristics and Goal Orientation

Science.gov (United States)

Kyndt, Eva; Donche, Vincent; Gijbels, David; Van Petegem, Peter

2014-01-01

Within teacher education, it is widely recognised that internships play a major role in preparing prospective teachers. The current research examines if the learning activities students' undertake in the workplace can be explained by students' goal orientation and their perceptions of the workplace. In addition, it will be investigated…

Relaxation of helium levels excited by heavy ion impact: III.- Orientation by anisotropic relaxation of excited atoms in previously aligned states

International Nuclear Information System (INIS)

Chamoun, E.; Lombardi, M.; Carre, M.; Gaillard, M.L.

1977-01-01

In the last paper of this series devoted to relaxation phenomena in a low pressure cell of helium excited by an accelerated ion beam, experimental evidence is given for a new mechanism of transfer between alignment and orientation through anisotropic relaxation of initially aligned excited states. The theory predicting this effect is briefly outlined and then description is given of the exact experimental conditions to detect the circularly polarized component of the light emitted by the target excited in the 4 1 D level of He I by Na + impact [fr

Teachers' Workplace Well-Being: Exploring a Process Model of Goal Orientation, Coping Behavior, Engagement, and Burnout

Science.gov (United States)

Parker, Philip D.; Martin, Andrew J.; Colmar, Susan; Liem, Gregory A.

2012-01-01

The current research integrated components of the transactional model of stress and coping with self-worth and goal theories to examine a model where (a) teachers' goal orientation (as indicated by mastery and failure avoidance) was hypothesized to predict their teaching coping strategies (as indicated by problem- and emotion-focused coping) and…

Anisotropic light scattering of individual sickle red blood cells.

Science.gov (United States)

Kim, Youngchan; Higgins, John M; Dasari, Ramachandra R; Suresh, Subra; Park, YongKeun

2012-04-01

We present the anisotropic light scattering of individual red blood cells (RBCs) from a patient with sickle cell disease (SCD). To measure light scattering spectra along two independent axes of elongated-shaped sickle RBCs with arbitrary orientation, we introduce the anisotropic Fourier transform light scattering (aFTLS) technique and measured both the static and dynamic anisotropic light scattering. We observed strong anisotropy in light scattering patterns of elongated-shaped sickle RBCs along its major axes using static aFTLS. Dynamic aFTLS analysis reveals the significantly altered biophysical properties in individual sickle RBCs. These results provide evidence that effective viscosity and elasticity of sickle RBCs are significantly different from those of the healthy RBCs.

Work Engagement: Antecedents, the Mediating Role of Learning Goal Orientation and Job Performance

Science.gov (United States)

Chughtai, Aamir Ali; Buckley, Finian

2011-01-01

Purpose: The present paper aims to explore the effects of state (trust in supervisor) and trait (trust propensity) trust on employees' work engagement. Furthermore, it seeks to investigate the mediating role of learning goal orientation in the relationship between work engagement and two forms of performance: in-role job performance and innovative…

Students’ goal orientations and learning strategies in a powerful learning environment : a case study

NARCIS (Netherlands)

Koopman, M.; Bakx, A.W.E.A.; Beijaard, D.

2014-01-01

In Dutch secondary education, experiments with powerful social constructivist learning environments are conducted that aim to appeal to students’ intrinsic goal orientations, use of deep cognitive learning strategies, and self-direction of meta-cognitive learning strategies. The aim of this study is

Anisotropic diffusion in a toroidal geometry

International Nuclear Information System (INIS)

Fischer, Paul F

2005-01-01

As part of the Department of Energy's applications oriented SciDAC project, three model problems have been proposed by the Center for Extended Magnetohydrodynamics Modeling to test the potential of numerical algorithms for challenging magnetohydrodynamics (MHD) problems that are required for future fusion development. The first of these, anisotropic diffusion in a toroidal geometry, is considered in this note

Local fields and effective conductivity tensor of ellipsoidal particle composite with anisotropic constituents

Science.gov (United States)

Kushch, Volodymyr I.; Sevostianov, Igor; Giraud, Albert

2017-11-01

An accurate semi-analytical solution of the conductivity problem for a composite with anisotropic matrix and arbitrarily oriented anisotropic ellipsoidal inhomogeneities has been obtained. The developed approach combines the superposition principle with the multipole expansion of perturbation fields of inhomogeneities in terms of ellipsoidal harmonics and reduces the boundary value problem to an infinite system of linear algebraic equations for the induced multipole moments of inhomogeneities. A complete full-field solution is obtained for the multi-particle models comprising inhomogeneities of diverse shape, size, orientation and properties which enables an adequate account for the microstructure parameters. The solution is valid for the general-type anisotropy of constituents and arbitrary orientation of the orthotropy axes. The effective conductivity tensor of the particulate composite with anisotropic constituents is evaluated in the framework of the generalized Maxwell homogenization scheme. Application of the developed method to composites with imperfect ellipsoidal interfaces is straightforward. Their incorporation yields probably the most general model of a composite that may be considered in the framework of analytical approach.

Goal orientation and conflicts: Motors of change in development projects in health care service.

Science.gov (United States)

Elg, Mattias; Kollberg, Beata; Lindmark, Jan; Olsson, Jesper

2007-01-01

In this article we present parts of a larger research study, which aims at explaining how a process-oriented innovation unfolds and develops over time in Swedish health care. Through a longitudinal field study of a national and a local development project, we analyze how the flow model--a process-oriented innovation that emphasizes the sequence of activities a patient undertakes through the health care system--has been developed in Swedish health care. We propose to explain how the development projects unfold over time through the use of process theories of organizational development and change. The national project is best understood as a process of evolution from the phase of selection of projects and teleological (goal-oriented, socially constructed development) and dialectic theory (development via conflict of 2 opposing ideas from different organizational entities) through the process in which national ideas face real-world practice. We also propose a synthesis of dialectics and teleological motors for explaining local development. This synthesis proposes that local development teams have a rather broad notion of what it takes to implement the flow model. The team knows the goal, procedures, and activities from a broad perspective. Through a search-and-interact process, in which other organizational entities such as IT consultants, medical units and politicians have a heavy influence, the group sets and implements goals. Details of how to proceed are, however, constructed in the process of acting. This occurs as ideas are developed and tested in real settings. We conclude the article by presenting managerial implications for understanding these process patterns.

Student Self-Assessment Practices: The Role of Gender, School Level and Goal Orientation

Science.gov (United States)

Yan, Zi

2018-01-01

The purpose of this study was to examine the effects of the key demographic variables of gender, school level and goal orientation on students' self-assessment practices, including self-directed feedback seeking (SDFS) and self-reflection (SR). A total of 8843 Hong Kong students were surveyed, ranging from Primary 4 to Secondary 6. The results…

The Impact of Goal Achievement Orientation on Student Technology Usage in the Classroom

Science.gov (United States)

McGloin, Rory; McGillicuddy, Kara T.; Christensen, John L.

2017-01-01

The aim of this study was to investigate whether students with differing goal achievement orientations were more likely to engage in on-task or off-task mobile device usage, as well as whether particular devices (specifically, laptops and smartphones) have a positive or negative relationship with specific task usage. The results of this study…

Anisotropic properties of aligned SWNT modified poly (methyl ...

Indian Academy of Sciences (India)

The electrical and mechanical properties of PMMA/SWNT composite were studied as a function of SWNT orientation and concentration. The aligned SWNT modified PMMA/SWNT composite presented highly anisotropic properties. The experimental results showed that the electrical conductivity and mechanical properties of ...

Study to validate the outcome goal, competencies and educational objectives for use in intensive care orientation programs.

Science.gov (United States)

Boyle, M; Butcher, R; Kenney, C

1998-03-01

Intensive care orientation programs have become an accepted component of intensive care education. To date, however, there have been no Australian-based standards defining the appropriate level of competence to be attained upon completion of orientation. The aim of this study was to validate a set of aims, competencies and educational objectives that could form the basis of intensive care orientation and which would ensure an outcome standard of safe and effective practice. An initial document containing a statement of the desired outcome goal, six competency statements and 182 educational objectives was developed through a review of the orientation programs developed by the investigators. The Delphi technique was used to gain consensus among 13 nurses recognised for their expertise in intensive care education. The expert group rated the acceptability of each of the study items and provided suggestions for objectives to be included. An approval rating of 80 per cent was required to retain each of the study items, with the document refined through three Delphi rounds. The final document contains a validated statement of outcome goal, competencies and educational objectives for intensive care orientation programs.

Flow shapes and higher harmonics in anisotropic transverse collective flow

Energy Technology Data Exchange (ETDEWEB)

Argintaru, Danut; Baban, Valerica [Constanta Maritime University, Faculty of Navigation and Naval Transport, Constanta (Romania); Besliu, Calin; Jipa, Alexandru; Grossu, Valeriu [University of Bucharest, Faculty of Physics, Bucharest (Romania); Esanu, Tiberiu; Cherciu, Madalin [Institute of Space Sciences Bucharest-Magurele, Bucharest (Romania)

2017-01-15

In this paper we show that by using a jet-finder algorithm (the Anti-k{sub T} one) on UrQMD/C simulated (Au+Au at 4, 10 and 15A GeV) collisions, we can identify different flow shape structures (single flow stream events, two flow streams events, three flow streams events, etc.) and order the bulk of events in equivalence flow shape classes. Considering these flow streams as the main directions of anisotropic transverse flow, we show that the Fourier coefficients v{sub n} of anisotropic flow are better emphasized when we analyze the different event flow shape classes than when the events are mixed. Also, if we do not know the real orientation of the reaction plane, we can use as reference the Flow stream 1 - the main particle flow stream - orientation (Ψ{sub Flowstream} {sub 1}) to highlight the initial shape of the participant nuclear matter in a central to peripheral collision, and the orientation of the participant plane of order n. (orig.)

Extending Antecedents of Achievement Goals: The Double-Edged Sword Effect of Social-Oriented Achievement Motive and Gender Differences

Science.gov (United States)

Nie, Youyan; Liem, Gregory Arief D.

2013-01-01

Underpinned by the hierarchical model of approach and avoidance motivation, the study examined the differential relations of individual-oriented and social-oriented achievement motives to approach and avoidance achievement goals (mastery-approach, performance-approach, mastery-avoidance, performance-avoidance). A total of 570 Chinese high school…

When focusing on a goal interferes with action control: action versus state orientation and over-maintenance of intentions

NARCIS (Netherlands)

Ruigendijk, H.A.H.; Koole, S.L.

2014-01-01

People vary in action versus state orientation, or the ease versus difficulty by which they can form and enact goals under demanding conditions (Kuhl and Beckmann in Volition and personality: action versus state orientation, Hogrefe, Göttingen, 1994). According to the over-maintenance hypothesis,

An explanatory model of academic achievement based on aptitudes, goal orientations, self-concept and learning strategies.

Science.gov (United States)

Miñano Pérez, Pablo; Castejón Costa, Juan-Luis; Gilar Corbí, Raquel

2012-03-01

As a result of studies examining factors involved in the learning process, various structural models have been developed to explain the direct and indirect effects that occur between the variables in these models. The objective was to evaluate a structural model of cognitive and motivational variables predicting academic achievement, including general intelligence, academic self-concept, goal orientations, effort and learning strategies. The sample comprised of 341 Spanish students in the first year of compulsory secondary education. Different tests and questionnaires were used to evaluate each variable, and Structural Equation Modelling (SEM) was applied to contrast the relationships of the initial model. The model proposed had a satisfactory fit, and all the hypothesised relationships were significant. General intelligence was the variable most able to explain academic achievement. Also important was the direct influence of academic self-concept on achievement, goal orientations and effort, as well as the mediating ability of effort and learning strategies between academic goals and final achievement.

Anisotropic diffusion tensor applied to temporal mammograms

DEFF Research Database (Denmark)

Karemore, Gopal; Brandt, Sami; Sporring, Jon

2010-01-01

changes related to  specific  effects  like  Hormonal  Replacement  Therapy  (HRT) and aging. Given effect-grouped patient data, we demonstrated how  anisotropic  diffusion  tensor  and  its  coherence  features computed in an anatomically oriented breast coordinate system followed by statistical learning...

Achievement Goal Orientations and Adolescents’ Subjective Well-Being in School: The Mediating Roles of Academic Social Comparison Directions

OpenAIRE

Tian, Lili; Yu, Tingting; Huebner, E. Scott

2017-01-01

The purpose of this study was to examine the multiple mediational roles of academic social comparison directions (upward academic social comparison and downward academic social comparison) on the relationships between achievement goal orientations (i.e., mastery goals, performance-approach goals, and performance-avoidance goals) and subjective well-being (SWB) in school (school satisfaction, school affect) in adolescent students in China. A total of 883 Chinese adolescent students (430 males;...

Parallel and Perpendicular Alignment of Anisotropic Particles in Free Liquid Microjets and Emerging Microdroplets.

Science.gov (United States)

Schlenk, Mathias; Hofmann, Eddie; Seibt, Susanne; Rosenfeldt, Sabine; Schrack, Lukas; Drechsler, Markus; Rothkirch, Andre; Ohm, Wiebke; Breu, Josef; Gekle, Stephan; Förster, Stephan

2018-04-24

Liquid microjets play a key role in fiber spinning, inkjet printing, and coating processes. In all of these applications, the liquid jets carry dispersed particles whose spatial and orientational distributions within the jet critically influence the properties of the fabricated structures. Despite its importance, there is currently no knowledge about the orientational distribution of particles within microjets and droplets. Here, we demonstrate a microfluidic device that allows to determine the local particle distribution and orientation by X-ray scattering. Using this methodology, we discovered unexpected changes in the particle orientation upon exiting the nozzle to form a free jet, and upon jet break-up into droplets, causing an unusual biaxial particle orientation. We show how flow and aspect ratio determine the flow orientation of anisotropic particles. Furthermore, we demonstrate that the observed phenomena are a general characteristic of anisotropic particles. Our findings greatly enhance our understanding of particle orientation in free jets and droplets and provide a rationale for controlling particle alignment in liquid jet-based fabrication methodologies.

Light Scattering of Rough Orthogonal Anisotropic Surfaces with Secondary Most Probable Slope Distributions

International Nuclear Information System (INIS)

Li Hai-Xia; Cheng Chuan-Fu

2011-01-01

We study the light scattering of an orthogonal anisotropic rough surface with secondary most probable slope distribution. It is found that the scattered intensity profiles have obvious secondary maxima, and in the direction perpendicular to the plane of incidence, the secondary maxima are oriented in a curve on the observation plane, which is called the orientation curve. By numerical calculation of the scattering wave fields with the height data of the sample, it is validated that the secondary maxima are induced by the side face element, which constitutes the prismoid structure of the anisotropic surface. We derive the equation of the quadratic orientation curve. Experimentally, we construct the system for light scattering measurement using a CCD. The scattered intensity profiles are extracted from the images at different angles of incidence along the orientation curves. The experimental results conform to the theory. (fundamental areas of phenomenology(including applications))

Motivational Regulations and Goal Orientation in Division III Basketball Players: Gender and Playing Status Differences

OpenAIRE

Teri J. Hepler; Kelly S. Witte

2016-01-01

Objective: The purpose of this study was to examine differences in motivational regulations and goal orientation based on gender and playing status.  Method:  Two hundred and fourteen Division III basketball players (92 males, 112 females) completed the Sport Motivation Scale-28 and the Task and Ego Orientation in Sport.  Based on average playing time per game, participants were classified as starters (over 20 minutes, n = 80), substitutes (6-20 minutes, n = 65), and benchwarmers (5 minutes o...

Functional Suitability Measurement using Goal-Oriented Approach based on ISO/IEC 25010 for Academics Information System

Directory of Open Access Journals (Sweden)

Ajeng Savitri Puspaningrum

2017-10-01

Full Text Available Rapid of information technology development grow a new competitive environment. Including higher education, they need to improve their service quality in order to provide education service in more competitive. One of the ways of using information technology in higher education is the used of Academic Information System (AIS. AIS was developed to achieve the goals of the learning process which is one of vision and mission organization success factor. The measurement is needed to evaluate the quality of AIS. Functionality is one of the quality factors which is measured by observing the correlation between function and functional suitability. In this study, the quality of AIS functional suitability is measured using goal-oriented approach base on ISO/IEC 25010 in the perspective of a lecturer. The strategic plan of an institution is used as a reference to measure if the system used to have meet institution goals when using this approach. The result shows that the measurement using goal-oriented approach become more objective and suitable to the need of used AIS quality improvement for the institution than the measurement with ISO/IEC 25010 only.

Finite-size effects for anisotropic bootstrap percolation : Logarithmic corrections

NARCIS (Netherlands)

van Enter, Aernout C. D.; Hulshof, Tim

In this note we analyse an anisotropic, two-dimensional bootstrap percolation model introduced by Gravner and Griffeath. We present upper and lower bounds on the finite-size effects. We discuss the similarities with the semi-oriented model introduced by Duarte.

Finite-size effects for anisotropic bootstrap percolation: logerithmic corrections

NARCIS (Netherlands)

Enter, van A.C.D.; Hulshof, T.

2007-01-01

In this note we analyse an anisotropic, two-dimensional bootstrap percolation model introduced by Gravner and Griffeath. We present upper and lower bounds on the finite-size effects. We discuss the similarities with the semi-oriented model introduced by Duarte.

Intrinsic motivation, performance, and the mediating role of mastery goal orientation: a test of self-determination theory.

Science.gov (United States)

Cerasoli, Christopher P; Ford, Michael T

2014-01-01

Although intrinsic motivation has been linked repeatedly to performance and outcomes, the causal relationship between the two has remained unclear. To explain the link, this study considered the focusing influence of mastery goals. Using a three-wave panel study and hypotheses drawn from self-determination theory and achievement goal theory, the current study sought to clarify the relationships between intrinsic motivation, mastery goal orientation, and performance. Specifically, the current study hypothesized and found that mastery goals mediated (explained) the relationship between intrinsic motivation and performance.

A meta-analytic examination of the goal orientation nomological net.

Science.gov (United States)

Payne, Stephanie C; Youngcourt, Satoris S; Beaubien, J Matthew

2007-01-01

The authors present an empirical review of the literature concerning trait and state goal orientation (GO). Three dimensions of GO were examined: learning, prove performance, and avoid performance along with presumed antecedents and proximal and distal consequences of these dimensions. Antecedent variables included cognitive ability, implicit theory of intelligence, need for achievement, self-esteem, general self-efficacy, and the Big Five personality characteristics. Proximal consequences included state GO, task-specific self-efficacy, self-set goal level, learning strategies, feedback seeking, and state anxiety. Distal consequences included learning, academic performance, task performance, and job performance. Generally speaking, learning GO was positively correlated, avoid performance GO was negatively correlated, and prove performance GO was uncorrelated with these variables. Consistent with theory, state GO tended to have stronger relationships with the distal consequences than did trait GO. Finally, using a meta-correlation matrix, the authors found that trait GO predicted job performance above and beyond cognitive ability and personality. These results demonstrate the value of GO to organizational researchers. 2007 APA, all rights reserved

Conflicts in Everyday Life: The Influence of Competing Goals on Domestic Energy Conservation

OpenAIRE

Anneli Selvefors; I. C. MariAnne Karlsson; Ulrike Rahe

2015-01-01

A common approach for understanding people’s domestic energy behavior is to study the influence of deterministic factors, such as attitudes, norms and knowledge, on behavior. However, few studies have succeeded in fully explaining people’s behavior based on these factors alone. To further the understanding of people’s everyday energy use, a goal-oriented approach based on activity theory has been applied to discuss energy conservation from a multiple goal perspective based on the findings fr...

The Impact of Within-School Autonomy on Students' Goal Orientations and Engagement with Mathematics

Science.gov (United States)

Carmichael, Colin; Muir, Tracey; Callingham, Rosemary

2017-01-01

School autonomy has been identified as having an impact on a school's performance, yet less has been reported about the effect this has on students' goal orientations and engagement with mathematics. In a national study conducted in schools across Australia, measures of school autonomy were collected from teachers and school leaders, along with…

Anisotropic elasticity of silicon and its application to the modelling of X-ray optics

International Nuclear Information System (INIS)

Zhang, Lin; Barrett, Raymond; Cloetens, Peter; Detlefs, Carsten; Sanchez del Rio, Manuel

2014-01-01

Anisotropic elasticity of single-crystal silicon, applications to modelling of a bent X-ray mirror, and thermal deformation of a liquid-nitrogen-cooled monochromator crystal are presented. The crystal lattice of single-crystal silicon gives rise to anisotropic elasticity. The stiffness and compliance coefficient matrix depend on crystal orientation and, consequently, Young’s modulus, the shear modulus and Poisson’s ratio as well. Computer codes (in Matlab and Python) have been developed to calculate these anisotropic elasticity parameters for a silicon crystal in any orientation. These codes facilitate the evaluation of these anisotropy effects in silicon for applications such as microelectronics, microelectromechanical systems and X-ray optics. For mechanically bent X-ray optics, it is shown that the silicon crystal orientation is an important factor which may significantly influence the optics design and manufacturing phase. Choosing the appropriate crystal orientation can both lead to improved performance whilst lowering mechanical bending stresses. The thermal deformation of the crystal depends on Poisson’s ratio. For an isotropic constant Poisson’s ratio, ν, the thermal deformation (RMS slope) is proportional to (1 + ν). For a cubic anisotropic material, the thermal deformation of the X-ray optics can be approximately simulated by using the average of ν 12 and ν 13 as an effective isotropic Poisson’s ratio, where the direction 1 is normal to the optic surface, and the directions 2 and 3 are two normal orthogonal directions parallel to the optical surface. This average is independent of the direction in the optical surface (the crystal plane) for Si(100), Si(110) and Si(111). Using the effective isotropic Poisson’s ratio for these orientations leads to an error in thermal deformation smaller than 5.5%

Anisotropic elasticity of silicon and its application to the modelling of X-ray optics

Energy Technology Data Exchange (ETDEWEB)

Zhang, Lin, E-mail: zhang@esrf.fr; Barrett, Raymond; Cloetens, Peter; Detlefs, Carsten; Sanchez del Rio, Manuel [European Synchrotron Radiation Facility, 6 Rue Jules Horowitz, BP 220, 38043 Grenoble (France)

2014-04-04

Anisotropic elasticity of single-crystal silicon, applications to modelling of a bent X-ray mirror, and thermal deformation of a liquid-nitrogen-cooled monochromator crystal are presented. The crystal lattice of single-crystal silicon gives rise to anisotropic elasticity. The stiffness and compliance coefficient matrix depend on crystal orientation and, consequently, Young’s modulus, the shear modulus and Poisson’s ratio as well. Computer codes (in Matlab and Python) have been developed to calculate these anisotropic elasticity parameters for a silicon crystal in any orientation. These codes facilitate the evaluation of these anisotropy effects in silicon for applications such as microelectronics, microelectromechanical systems and X-ray optics. For mechanically bent X-ray optics, it is shown that the silicon crystal orientation is an important factor which may significantly influence the optics design and manufacturing phase. Choosing the appropriate crystal orientation can both lead to improved performance whilst lowering mechanical bending stresses. The thermal deformation of the crystal depends on Poisson’s ratio. For an isotropic constant Poisson’s ratio, ν, the thermal deformation (RMS slope) is proportional to (1 + ν). For a cubic anisotropic material, the thermal deformation of the X-ray optics can be approximately simulated by using the average of ν{sub 12} and ν{sub 13} as an effective isotropic Poisson’s ratio, where the direction 1 is normal to the optic surface, and the directions 2 and 3 are two normal orthogonal directions parallel to the optical surface. This average is independent of the direction in the optical surface (the crystal plane) for Si(100), Si(110) and Si(111). Using the effective isotropic Poisson’s ratio for these orientations leads to an error in thermal deformation smaller than 5.5%.

A low-cost, goal-oriented ‘compact proper orthogonal decomposition’ basis for model reduction of static systems

KAUST Repository

Carlberg, Kevin

2010-12-10

A novel model reduction technique for static systems is presented. The method is developed using a goal-oriented framework, and it extends the concept of snapshots for proper orthogonal decomposition (POD) to include (sensitivity) derivatives of the state with respect to system input parameters. The resulting reduced-order model generates accurate approximations due to its goal-oriented construction and the explicit \\'training\\' of the model for parameter changes. The model is less computationally expensive to construct than typical POD approaches, since efficient multiple right-hand side solvers can be used to compute the sensitivity derivatives. The effectiveness of the method is demonstrated on a parameterized aerospace structure problem. © 2010 John Wiley & Sons, Ltd.

A low-cost, goal-oriented ‘compact proper orthogonal decomposition’ basis for model reduction of static systems

KAUST Repository

Carlberg, Kevin; Farhat, Charbel

2010-01-01

A novel model reduction technique for static systems is presented. The method is developed using a goal-oriented framework, and it extends the concept of snapshots for proper orthogonal decomposition (POD) to include (sensitivity) derivatives of the state with respect to system input parameters. The resulting reduced-order model generates accurate approximations due to its goal-oriented construction and the explicit 'training' of the model for parameter changes. The model is less computationally expensive to construct than typical POD approaches, since efficient multiple right-hand side solvers can be used to compute the sensitivity derivatives. The effectiveness of the method is demonstrated on a parameterized aerospace structure problem. © 2010 John Wiley & Sons, Ltd.

Injectable Anisotropic Nanocomposite Hydrogels Direct in Situ Growth and Alignment of Myotubes

International Nuclear Information System (INIS)

De France, Kevin J.; Yager, Kevin G.; Chan, Katelyn J. W.; Corbett, Brandon; Cranston, Emily D.; Hoare, Todd

2017-01-01

Here, while injectable in situ cross-linking hydrogels have attracted increasing attention as minimally invasive tissue scaffolds and controlled delivery systems, their inherently disorganized and isotropic network structure limits their utility in engineering oriented biological tissues. Traditional methods to prepare anisotropic hydrogels are not easily translatable to injectable systems given the need for external equipment to direct anisotropic gel fabrication and/or the required use of temperatures or solvents incompatible with biological systems. Herein, we report a new class of injectable nanocomposite hydrogels based on hydrazone cross-linked poly(oligoethylene glycol methacrylate) and magnetically aligned cellulose nanocrystals (CNCs) capable of encapsulating skeletal muscle myoblasts and promoting their differentiation into highly oriented myotubes in situ. CNC alignment occurs on the same time scale as network gelation and remains fixed after the removal of the magnetic field, enabling concurrent CNC orientation and hydrogel injection. The aligned hydrogels show mechanical and swelling profiles that can be rationally modulated by the degree of CNC alignment and can direct myotube alignment both in two- and three-dimensions following coinjection of the myoblasts with the gel precursor components. As such, these hydrogels represent a critical advancement in anisotropic biomimetic scaffolds that can be generated noninvasively in vivo following simple injection.

The Relationships among Students' Future-Oriented Goals and Subgoals, Perceived Task Instrumentality, and Task-Oriented Self-Regulation Strategies in an Academic Environment

Science.gov (United States)

Tabachnick, Sharon E.; Miller, Raymond B.; Relyea, George E.

2008-01-01

The authors performed path analysis, followed by a bootstrap procedure, to test the predictions of a model explaining the relationships among students' distal future goals (both extrinsic and intrinsic), their adoption of a middle-range subgoal, their perceptions of task instrumentality, and their proximal task-oriented self-regulation strategies.…

Experimental study of the anisotropic magneto-Seebeck effect in (Ga,Mn)As thin films

Energy Technology Data Exchange (ETDEWEB)

Althammer, Matthias; Krupp, Alexander T.; Brenninger, Thomas; Venkateshvaran, Deepak; Opel, Matthias; Gross, Rudolf; Goennenwein, Sebastian T.B. [Walther-Meissner-Institut, Bayerische Akademie der Wissenschaften, Garching (Germany); Dreher, Lukas [Walter Schottky Institut, Technische Universitaet Muenchen, Garching (Germany); Schoch, Wladimir; Limmer, Wolfgang [Abteilung Halbleiterphysik, Universitaet Ulm, Ulm (Germany)

2011-07-01

In analogy to anisotropic magnetoresistance (AMR), the thermopower of ferromagnetic materials also characteristically depends on the orientation of the magnetization vector. This anisotropic magneto-thermopower - or anisotropic magneto-Seebeck effect (AMS) - has only scarcely been studied to date. Taking the ferromagnetic semiconductor (Ga,Mn)As with its large magneto-resistive effects as a prototype example, we have measured the evolution of both the AMR and the AMS effects at liquid He temperatures as a function of the orientation of a magnetic field applied in the (Ga,Mn)As film plane, for different, fixed magnetic field magnitudes. Our data show that the AMS effect can be adequately modeled only if the symmetry of the (Ga,Mn)As crystal is explicitly taken into account. We quantitatively compare our AMR and AMS measurements with corresponding model calculations, and address the validity of the Mott relations linking the magneto-resistance and the magneto-Seebeck coefficients.

Anisotropic magnetocrystalline coupling of the skyrmion lattice in MnSi

Science.gov (United States)

Luo, Yongkang; Lin, Shi-Zeng; Fobes, D. M.; Liu, Zhiqi; Bauer, E. D.; Betts, J. B.; Migliori, A.; Thompson, J. D.; Janoschek, M.; Maiorov, B.

2018-03-01

We investigate the anisotropic nature of magnetocrystalline coupling between the crystallographic and skyrmion crystal (SKX) lattices in the chiral magnet MnSi by magnetic field-angle resolved resonant ultrasound spectroscopy. Abrupt changes are observed in the elastic moduli and attenuation when the magnetic field is parallel to the [011] crystallographic direction. These observations are interpreted in a phenomenological Ginzburg-Landau theory that identifies switching of the SKX orientation to be the result of an anisotropic magnetocrystalline coupling potential. Our paper sheds new light on the nature of magnetocrystalline coupling potential relevant to future spintronic applications.

Dynamic Effects of Performance-Avoidance Goal Orientation on Student Achievement in Language and Mathematics.

Science.gov (United States)

Stamovlasis, Dimitrios; Gonida, Sofia-Eleftheria N

2018-07-01

The present study used achievement goal theory (AGT) as a theoretical framework and examined the role of mastery and performance goals, both performance-approach and performance-avoidance, on school achieve-ment within the nonlinear dynamical systems (NDS) perspective. A series of cusp catastrophe models were applied on students' achievement in a number of school subjects, such as mathematics and language for elementary school and algebra, geometry, ancient and modern Greek language for high school, using achievement goal orientations as control variables. The participants (N=224) were students attending fifth and eighth grade (aged 11 and 14, respectively) in public schools located in northern Greece. Cusp analysis based on the probability density function was carried out by two procedures, the maximum likelihood and the least squares. The results showed that performance-approach goals had no linear effect on achievement, while the cusp models implementing mastery goals as the asymmetry factor and performance-avoidance as the bifurcation, proved superior to their linear alternatives. The results of the study based on NDS support the multiple goal perspective within AGT. Theoretical issues, educational implications and future directions are discussed.

Tunneling anisotropic magnetoresistance via molecular π orbitals of Pb dimers

Science.gov (United States)

Schöneberg, Johannes; Ferriani, Paolo; Heinze, Stefan; Weismann, Alexander; Berndt, Richard

2018-01-01

Pb dimers on a ferromagnetic surface are shown to exhibit large tunneling anisotropic magnetoresistance (TAMR) due to molecular π orbitals. Dimers oriented differently with respect to the magnetization directions of a ferromagnetic Fe double layer on W(110) were made with a scanning tunneling microscope. Depending on the dimer orientations, TAMR is absent or as large as 20% at the Fermi level. General arguments and first-principles calculations show that mixing of molecular orbitals due to spin-orbit coupling, which leads to TAMR, is maximal when the magnetization is oriented parallel to the dimer axis.

Students' goal orientations, information processing strategies and knowledge development in competence-based pre-vocational secondary education

NARCIS (Netherlands)

Koopman, M.

2010-01-01

In this study, learning processes of students in competence-based Pre-Vocational Secondary Education (PVSE; in Dutch vmbo) were investigated. The study aimed at describing the relation between goal orientations, information processing strategies and the development of knowledge of these students.

Influence of copper foil polycrystalline structure on graphene anisotropic etching

Energy Technology Data Exchange (ETDEWEB)

Sharma, Kamal P. [Department of Frontier Materials, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555 (Japan); Mahyavanshi, Rakesh D. [Department of Physical Science and Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555 (Japan); Kalita, Golap, E-mail: kalita.golap@nitech.ac.jp [Department of Frontier Materials, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555 (Japan); Department of Physical Science and Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555 (Japan); Tanemura, Masaki [Department of Frontier Materials, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555 (Japan); Department of Physical Science and Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555 (Japan)

2017-01-30

Graphical abstract: Hexagonal hole formation with anisotropic etching independent of the stripes and wrinkles in the synthesized graphene. We also observed variation in etched pattern of the graphene depending on the base Cu grain orientations, attributing to difference in nucleation and growth process. - Highlights: • Reveal the influence of copper polycrystalline structure on anisotropic etching of graphene. • Hexagonal hole formation with etching is observed to be independent of stripes and wrinkles in graphene. • Variation in etched pattern of graphene depending on the base Cu grain is confirmed. • This finding will help to understand the nature of microscopic etched pattern in graphene. - Abstract: Anisotropic etching of graphene and other two dimensional materials is an important tool to understand the growth process as well as enabling fabrication of various well-defined structures. Here, we reveal the influence of copper foil polycrystalline structure on anisotropic etching process of as-synthesized graphene. Graphene crystals were synthesized on the polycrystalline Cu foil by a low-pressure chemical vapor deposition (LPCVD) system. Microscopic analysis shows difference in shape, size and stripes alignment of graphene crystals with dissimilar nucleation within closure vicinity of neighboring Cu grains. Post-growth etching of such graphene crystals also significantly affected by the crystallographic nature of Cu grains as observed by the field emission scanning electron microscope (FE-SEM) and electron back scattered diffraction (EBSD) analysis. Hexagonal hole formation with anisotropic etching is observed to be independent of the stripes and wrinkles in the synthesized graphene. We also observed variation in etched pattern of the graphene depending on the base Cu grain orientations, attributing to difference in nucleation and growth process. The findings can facilitate to understand the nature of microscopic etched pattern depending on metal

Influence of copper foil polycrystalline structure on graphene anisotropic etching

International Nuclear Information System (INIS)

Sharma, Kamal P.; Mahyavanshi, Rakesh D.; Kalita, Golap; Tanemura, Masaki

2017-01-01

Graphical abstract: Hexagonal hole formation with anisotropic etching independent of the stripes and wrinkles in the synthesized graphene. We also observed variation in etched pattern of the graphene depending on the base Cu grain orientations, attributing to difference in nucleation and growth process. - Highlights: • Reveal the influence of copper polycrystalline structure on anisotropic etching of graphene. • Hexagonal hole formation with etching is observed to be independent of stripes and wrinkles in graphene. • Variation in etched pattern of graphene depending on the base Cu grain is confirmed. • This finding will help to understand the nature of microscopic etched pattern in graphene. - Abstract: Anisotropic etching of graphene and other two dimensional materials is an important tool to understand the growth process as well as enabling fabrication of various well-defined structures. Here, we reveal the influence of copper foil polycrystalline structure on anisotropic etching process of as-synthesized graphene. Graphene crystals were synthesized on the polycrystalline Cu foil by a low-pressure chemical vapor deposition (LPCVD) system. Microscopic analysis shows difference in shape, size and stripes alignment of graphene crystals with dissimilar nucleation within closure vicinity of neighboring Cu grains. Post-growth etching of such graphene crystals also significantly affected by the crystallographic nature of Cu grains as observed by the field emission scanning electron microscope (FE-SEM) and electron back scattered diffraction (EBSD) analysis. Hexagonal hole formation with anisotropic etching is observed to be independent of the stripes and wrinkles in the synthesized graphene. We also observed variation in etched pattern of the graphene depending on the base Cu grain orientations, attributing to difference in nucleation and growth process. The findings can facilitate to understand the nature of microscopic etched pattern depending on metal

An Investigation of Task and Ego Oriented Goals of the Students Majoring at the Faculty of Sport Sciences

Science.gov (United States)

Belli, Emre

2015-01-01

The aim of this study is to explore the task and ego oriented goals of the students majoring at the Faculty of Sports Sciences at Ataturk University. For data collection, "The Task and Ego Orientation in Sport Questionnaire", which was developed by Duda (1) and adapted into Turkish by Toros and Yetim (2), was used in the current study to…

Oriented polymers obtained by UV polymerization of oriented low-molecular-weight species

NARCIS (Netherlands)

Broer, D.J.; Mol, G.N.; Bowden, M.J.; Turner, S.R.

1987-01-01

Anisotropic polymer filaments could be produced by in-situ photopolymerization of oriented acrylate monomers. Ordering of the monomers was achieved by an elongational flow prior to the polymerization process. The produced polymers showed a high elastic modulus and a low thermal expansion coefficient

Intra- and interpersonal coordination of goal-oriented movements in a working scenario

DEFF Research Database (Denmark)

Vesper, Cordula; Stork, Sonja; Wiesbeck, Mathey

2008-01-01

We present a scenario for examining mechanisms of goal-oriented movement coordination in humans. Our aim is to determine behavioral rules and constraints that shape movement execution. Therefore, trajectories of hand and finger movements are recorded while participants perform a simple construction...... task. We measure different parameters of reaching and grasping and compare performance in a single-person versus a two-person condition. First results of a pilot study are shown. Finally, we discuss our scenario with respect to possible applications in human-robot interaction in a factory environment....

A GENERALIZED DIFFUSION TENSOR FOR FULLY ANISOTROPIC DIFFUSION OF ENERGETIC PARTICLES IN THE HELIOSPHERIC MAGNETIC FIELD

International Nuclear Information System (INIS)

Effenberger, F.; Fichtner, H.; Scherer, K.; Barra, S.; Kleimann, J.; Strauss, R. D.

2012-01-01

The spatial diffusion of cosmic rays in turbulent magnetic fields can, in the most general case, be fully anisotropic, i.e., one has to distinguish three diffusion axes in a local, field-aligned frame. We reexamine the transformation for the diffusion tensor from this local to a global frame, in which the Parker transport equation for energetic particles is usually formulated and solved. Particularly, we generalize the transformation formulae to allow for an explicit choice of two principal local perpendicular diffusion axes. This generalization includes the 'traditional' diffusion tensor in the special case of isotropic perpendicular diffusion. For the local frame, we describe the motivation for the choice of the Frenet-Serret trihedron, which is related to the intrinsic magnetic field geometry. We directly compare the old and the new tensor elements for two heliospheric magnetic field configurations, namely the hybrid Fisk and Parker fields. Subsequently, we examine the significance of the different formulations for the diffusion tensor in a standard three-dimensional model for the modulation of galactic protons. For this, we utilize a numerical code to evaluate a system of stochastic differential equations equivalent to the Parker transport equation and present the resulting modulated spectra. The computed differential fluxes based on the new tensor formulation deviate from those obtained with the 'traditional' one (only valid for isotropic perpendicular diffusion) by up to 60% for energies below a few hundred MeV depending on heliocentric distance.

Goal orientation and work role performance: predicting adaptive and proactive work role performance through self-leadership strategies.

Science.gov (United States)

Marques-Quinteiro, Pedro; Curral, Luís Alberto

2012-01-01

This article explores the relationship between goal orientation, self-leadership dimensions, and adaptive and proactive work role performances. The authors hypothesize that learning orientation, in contrast to performance orientation, positively predicts proactive and adaptive work role performances and that this relationship is mediated by self-leadership behavior-focused strategies. It is posited that self-leadership natural reward strategies and thought pattern strategies are expected to moderate this relationship. Workers (N = 108) from a software company participated in this study. As expected, learning orientation did predict adaptive and proactive work role performance. Moreover, in the relationship between learning orientation and proactive work role performance through self-leadership behavior-focused strategies, a moderated mediation effect was found for self-leadership natural reward and thought pattern strategies. In the end, the authors discuss the results and implications are discussed and future research directions are proposed.

Learning processes of students pre-vocational secondary education: relations between goal orientations, information processing strategies and development of conceptual knowledge

NARCIS (Netherlands)

Koopman, M.; Brok, den P.J.; Beijaard, D.; Teune, P.J.

2011-01-01

The purpose of this study was to investigate relations between goal orientations, information processing strategies and development of conceptual knowledge of pre-vocational secondary education students (n = 719; 14 schools). Students' preferences for certain types of goals and information

The Role of Motivating Tasks and Personal Goal Orientations in Students' Coping Strategies in Science

Science.gov (United States)

Subasi, Münevver; Tas, Yasemin

2016-01-01

This study aims to investigate coping strategies of middle school students in science classes in relation to students' goal orientations and motivating tasks conducted in the classroom environment. The study was conducted in spring semester of 2015-2016 academic year. Sample of the study consists of 316 middle school students receiving education…

The Impact of Group Design Projects in Engineering on Achievement Goal Orientations and Academic Outcomes

Science.gov (United States)

Rambo-Hernandez, Karen E.; Atadero, Rebecca A.; Balgopal, Meena

2017-01-01

This study examined the impact of incorporating group design projects into a second-year engineering class on achievement goal orientations and two academic outcomes: concept inventory and final exam scores. In this study, two sections were taught using lecture format, but one section also completed three group design projects as part of their…

Profiles of self-concept, goal orientation, and self-regulation in students with physical, intellectual, and multiple disabilities: Implications for instructional support.

Science.gov (United States)

Varsamis, Panagiotis; Agaliotis, Ioannis

2011-01-01

The present study explored physical self-concept, goal orientation in sport, and self-regulation in regard to a motor task, in 75 secondary students with physical, intellectual, and multiple disabilities, who were educated in the same special education units. It was found that students with intellectual disabilities generally presented a positive profile in all three psychosocial constructs, whereas students with physical disabilities presented low scores in most measures. Students with multiple disabilities did not differ essentially from students with intellectual disability in regard to physical self-concept and goal orientation; however, they compared unfavorably to them regarding self-regulation. The delineation of a distinct and defendable profile of self-concept, goal orientation, and self-regulation for each disability group allows the formulation of proposals for the implementation of appropriate instructional programs for students belonging to the above mentioned categories. Copyright © 2011 Elsevier Ltd. All rights reserved.

A unified theoretical and experimental study of anisotropic hardening

International Nuclear Information System (INIS)

Boehler, J.P.; Raclin, J.

1981-01-01

The purpose of this work is to develop a consistent formulation of the constitutive relations regarding anisotropic hardening materials. Attention is focused on the appearance and the evolution of mechanical anisotropies during irreversible processes, such as plastic forming and inelastic deformation of structures. The representation theorems for anisotropic tensor functions constitute a theoretical basis, allowing to reduce arbitrariness and to obtain a unified formulation of anisotropic hardening. In this approach, a general three-dimensional constitutive law is developed for prestrained initially orthotropic materials. Introduction of the plastic behavior results in the general forms of both the flow-law and the yield criterion. The developed theory is then specialized for the case of plane stress and different modes of anisotropic hardening are analyzed. A new generalization of the Von Mises criterion is proposed, in considering a homogeneous form of order two in stress and employing the simplest combinations of the basic invariants entering the general form of the yield condition. The proposed criterion involves specific terms accounting for the initial anisotropy, the deformation induced anisotropy and correlative terms between initial and induced anisotropy. The effects of prestrainings result in both isotropic and anisotropic hardening. An adequate experimental program, consisting of uniaxial tensile tests on oriented specimens of prestrained sheet-metal, was performed, in order to determine the specific form and the evolution of the anisotropic failure criterion for soft-steel subjected to different irreversible prestrainings. (orig.)

Dipole estimation errors due to not incorporating anisotropic conductivities in realistic head models for EEG source analysis

Science.gov (United States)

Hallez, Hans; Staelens, Steven; Lemahieu, Ignace

2009-10-01

EEG source analysis is a valuable tool for brain functionality research and for diagnosing neurological disorders, such as epilepsy. It requires a geometrical representation of the human head or a head model, which is often modeled as an isotropic conductor. However, it is known that some brain tissues, such as the skull or white matter, have an anisotropic conductivity. Many studies reported that the anisotropic conductivities have an influence on the calculated electrode potentials. However, few studies have assessed the influence of anisotropic conductivities on the dipole estimations. In this study, we want to determine the dipole estimation errors due to not taking into account the anisotropic conductivities of the skull and/or brain tissues. Therefore, head models are constructed with the same geometry, but with an anisotropically conducting skull and/or brain tissue compartment. These head models are used in simulation studies where the dipole location and orientation error is calculated due to neglecting anisotropic conductivities of the skull and brain tissue. Results show that not taking into account the anisotropic conductivities of the skull yields a dipole location error between 2 and 25 mm, with an average of 10 mm. When the anisotropic conductivities of the brain tissues are neglected, the dipole location error ranges between 0 and 5 mm. In this case, the average dipole location error was 2.3 mm. In all simulations, the dipole orientation error was smaller than 10°. We can conclude that the anisotropic conductivities of the skull have to be incorporated to improve the accuracy of EEG source analysis. The results of the simulation, as presented here, also suggest that incorporation of the anisotropic conductivities of brain tissues is not necessary. However, more studies are needed to confirm these suggestions.

Dipole estimation errors due to not incorporating anisotropic conductivities in realistic head models for EEG source analysis

International Nuclear Information System (INIS)

Hallez, Hans; Staelens, Steven; Lemahieu, Ignace

2009-01-01

EEG source analysis is a valuable tool for brain functionality research and for diagnosing neurological disorders, such as epilepsy. It requires a geometrical representation of the human head or a head model, which is often modeled as an isotropic conductor. However, it is known that some brain tissues, such as the skull or white matter, have an anisotropic conductivity. Many studies reported that the anisotropic conductivities have an influence on the calculated electrode potentials. However, few studies have assessed the influence of anisotropic conductivities on the dipole estimations. In this study, we want to determine the dipole estimation errors due to not taking into account the anisotropic conductivities of the skull and/or brain tissues. Therefore, head models are constructed with the same geometry, but with an anisotropically conducting skull and/or brain tissue compartment. These head models are used in simulation studies where the dipole location and orientation error is calculated due to neglecting anisotropic conductivities of the skull and brain tissue. Results show that not taking into account the anisotropic conductivities of the skull yields a dipole location error between 2 and 25 mm, with an average of 10 mm. When the anisotropic conductivities of the brain tissues are neglected, the dipole location error ranges between 0 and 5 mm. In this case, the average dipole location error was 2.3 mm. In all simulations, the dipole orientation error was smaller than 10 deg. We can conclude that the anisotropic conductivities of the skull have to be incorporated to improve the accuracy of EEG source analysis. The results of the simulation, as presented here, also suggest that incorporation of the anisotropic conductivities of brain tissues is not necessary. However, more studies are needed to confirm these suggestions.

Guidance Oriented Acquisition of Learning Skills (Project GOALS). Final Evaluation Report, 1992-93. OREA Report.

Science.gov (United States)

Musante, Patricia

Guidance Oriented Acquisition of Learning Skills (Project GOALS) was a federally-funded project in three Brooklyn (New York) high schools in its fourth year of operation in 1992-93. It served 312 limited-English-proficient and 57 English-proficient students through instruction in English as a Second Language (ESL), native language arts (NLA) in…

TOPICAL REVIEW Textured silicon nitride: processing and anisotropic properties

Directory of Open Access Journals (Sweden)

Xinwen Zhu and Yoshio Sakka

2008-01-01

Full Text Available Textured silicon nitride (Si3N4 has been intensively studied over the past 15 years because of its use for achieving its superthermal and mechanical properties. In this review we present the fundamental aspects of the processing and anisotropic properties of textured Si3N4, with emphasis on the anisotropic and abnormal grain growth of β-Si3N4, texture structure and texture analysis, processing methods and anisotropic properties. On the basis of the texturing mechanisms, the processing methods described in this article have been classified into two types: hot-working (HW and templated grain growth (TGG. The HW method includes the hot-pressing, hot-forging and sinter-forging techniques, and the TGG method includes the cold-pressing, extrusion, tape-casting and strong magnetic field alignment techniques for β-Si3N4 seed crystals. Each processing technique is thoroughly discussed in terms of theoretical models and experimental data, including the texturing mechanisms and the factors affecting texture development. Also, methods of synthesizing the rodlike β-Si3N4 single crystals are presented. Various anisotropic properties of textured Si3 N4 and their origins are thoroughly described and discussed, such as hardness, elastic modulus, bending strength, fracture toughness, fracture energy, creep behavior, tribological and wear behavior, erosion behavior, contact damage behavior and thermal conductivity. Models are analyzed to determine the thermal anisotropy by considering the intrinsic thermal anisotropy, degree of orientation and various microstructure factors. Textured porous Si3N4 with a unique microstructure composed of oriented elongated β-Si3N4 and anisotropic pores is also described for the first time, with emphasis on its unique mechanical and thermal-mechanical properties. Moreover, as an important related material, textured α-Sialon is also reviewed, because the presence of elongated α-Sialon grains allows the production of textured �

Three-dimensional geometric simulations of random anisotropic growth during transformation phenomena

DEFF Research Database (Denmark)

Godiksen, Rasmus Brauner; Rios, P.R.; Vandermeer, Roy Allen

2008-01-01

In this paper, the effects of anisotropic growth during transformation processes are investigated by geometric simulations of randomly oriented shape preserved ellipsoids in three dimensions and the applicability of idealized models are tested. Surprisingly, the results show that the models can...

From goal motivation to goal progress: the mediating role of coping in the Self-Concordance Model.

Science.gov (United States)

Gaudreau, Patrick; Carraro, Natasha; Miranda, Dave

2012-01-01

The present studies examined the mediating role of self-regulatory mechanisms in the relationship between goal motivation and goal progress in the Self-Concordance Model. First, a systematic review, using meta-analytical path analysis, supported the mediating role of effort and action planning in the positive association between autonomous goal motivation and goal progress. Second, results from two additional empirical studies, using structural equation modeling, lent credence to the mediating role of coping in the relationship between goal motivation and goal progress of university students. Autonomous goal motivation was positively associated with task-oriented coping, which predicted greater goal progress during midterm exams (Study 1, N=702) and at the end of the semester in a different sample (Study 2, N=167). Controlled goal motivation was associated with greater disengagement-oriented coping (Study 1 and Study 2) and lesser use of task-oriented coping (Study 2), which reduced goal progress. These results held up after controlling for perceived stress (Study 2). Our findings highlight the importance of coping in the "inception-to-attainment" goal process because autonomous goal motivation indirectly rather than directly predicts goal progress of university students through their usage of task-oriented coping.

Laser induced nuclear orientation effects

International Nuclear Information System (INIS)

Burns, M.; Pappas, P.; Feld, M.S.; Murnick, D.E.

1977-01-01

Resonant laser radiation can orient metastable nuclei, resulting in spatially anisotropic emission of β or γ radiation. This technique can be used to obtain isomer shifts and nuclear moments and can lead to isomer separation. (Auth.)

The Influence of Personality, Parenting Styles, and Perfectionism on Performance Goal Orientation in High Ability Students

Science.gov (United States)

Miller, Angie L.; Speirs Neumeister, Kristie L.

2017-01-01

The current study explores relationships among gender, perceived parenting style, the personality traits of conscientiousness and neuroticism, perfectionism, and achievement goal orientation in a high ability and high achieving young adult population. Using data from Honors College students at a Midwestern university, a path model suggests that…

Teachers' Understanding of Learning Goals

DEFF Research Database (Denmark)

Krog Skott, Charlotte; Slot, Marie Falkesgaard; Carlsen, Dorthe

will be presented. We expect to deepen our understanding of the relations between the various parameters in the teachers' practice in relation to learning goals and goal-oriented teaching. There is conducted research on the effects of goal-oriented teaching on students' learning both internationally...

Weak Ties and Self-Regulation in Job Search: The Effects of Goal Orientation on Networking

Science.gov (United States)

Hatala, John-Paul; Yamkovenko, Bogdan

2016-01-01

The purpose of this study is to empirically investigate the relationship between the self-regulatory variable of goal orientation and the extent to which job seekers reach out to and use weak ties in their job search. Weak ties, as defined by Granovettor, are connections to densely knit networks outside the individual's direct contacts who could…

Anisotropic magnetoelectric characteristics in five-layer magnetization-graded multiferroic composites

Directory of Open Access Journals (Sweden)

Lei Chen

2017-05-01

Full Text Available We investigate the anisotropic magnetoelectric(ME characteristics for the five-layer magnetization-graded multiferroic composites(MGMC. The magnetic anisotropy and corresponding anisotropic magnetomechanical effect, demagnetization effect and magneto-mechanical damping’s dependence on magnetic field direction result in an obvious anisotropic ME coupling effect. The experimental results show that ME voltage coefficient in H33 mode is remarkably larger than the other ones (H11, H31 and H13 over the whole Hdc range. Correspondingly, ∂VME/∂Hdc arrives about 420mV/Oe at an optimum bias magnetic field of 46Oe, which is approximately 40 times larger than that of the previous reported composite. Furthermore, it also demonstrates an obvious angular dependence on dc magnetic field. Taking advantage of these specifications, the MGMC can be used to detect weak dc magnetic field and its spatial orientation.

Nanoscale Rheology and Anisotropic Diffusion Using Single Gold Nanorod Probes

Science.gov (United States)

Molaei, Mehdi; Atefi, Ehsan; Crocker, John C.

2018-03-01

The complex rotational and translational Brownian motion of anisotropic particles depends on their shape and the viscoelasticity of their surroundings. Because of their strong optical scattering and chemical versatility, gold nanorods would seem to provide the ultimate probes of rheology at the nanoscale, but the suitably accurate orientational tracking required to compute rheology has not been demonstrated. Here we image single gold nanorods with a laser-illuminated dark-field microscope and use optical polarization to determine their three-dimensional orientation to better than one degree. We convert the rotational diffusion of single nanorods in viscoelastic polyethylene glycol solutions to rheology and obtain excellent agreement with bulk measurements. Extensions of earlier models of anisotropic translational diffusion to three dimensions and viscoelastic fluids give excellent agreement with the observed motion of single nanorods. We find that nanorod tracking provides a uniquely capable approach to microrheology and provides a powerful tool for probing nanoscale dynamics and structure in a range of soft materials.

Goal-oriented rectification of camera-based document images.

Science.gov (United States)

Stamatopoulos, Nikolaos; Gatos, Basilis; Pratikakis, Ioannis; Perantonis, Stavros J

2011-04-01

Document digitization with either flatbed scanners or camera-based systems results in document images which often suffer from warping and perspective distortions that deteriorate the performance of current OCR approaches. In this paper, we present a goal-oriented rectification methodology to compensate for undesirable document image distortions aiming to improve the OCR result. Our approach relies upon a coarse-to-fine strategy. First, a coarse rectification is accomplished with the aid of a computationally low cost transformation which addresses the projection of a curved surface to a 2-D rectangular area. The projection of the curved surface on the plane is guided only by the textual content's appearance in the document image while incorporating a transformation which does not depend on specific model primitives or camera setup parameters. Second, pose normalization is applied on the word level aiming to restore all the local distortions of the document image. Experimental results on various document images with a variety of distortions demonstrate the robustness and effectiveness of the proposed rectification methodology using a consistent evaluation methodology that encounters OCR accuracy and a newly introduced measure using a semi-automatic procedure.

Anisotropic and nonlinear optical waveguides

CERN Document Server

Someda, CG

1992-01-01

Dielectric optical waveguides have been investigated for more than two decades. In the last ten years they have had the unique position of being simultaneously the backbone of a very practical and fully developed technology, as well as an extremely exciting area of basic, forefront research. Existing waveguides can be divided into two sets: one consisting of waveguides which are already in practical use, and the second of those which are still at the laboratory stage of their evolution. This book is divided into two separate parts: the first dealing with anisotropic waveguides, an

Anisotropic Defect-Mediated Melting of Two-Dimensional Colloidal Crystals

Science.gov (United States)

Eisenmann, C.; Gasser, U.; Keim, P.; Maret, G.

2004-09-01

The melting transition of anisotropic two-dimensional (2D) crystals is studied in a model system of superparamagnetic colloids. The anisotropy of the induced dipole-dipole interaction is varied by tilting the external magnetic field off the normal to the particle plane. By analyzing the time-dependent Lindemann parameter as well as translational and orientational order we observe a 2D smecticlike phase. The Kosterlitz-Thouless-Halperin-Nelson-Young scenario of isotropic melting is modified: dislocation pairs and dislocations appear with different probabilities depending on their orientation with respect to the in-plane field.

Crystal orientation dependent thermoelectric properties of highly oriented aluminum-doped zinc oxide thin films

KAUST Repository

Abutaha, Anas I.

2013-02-06

We demonstrate that the thermoelectric properties of highly oriented Al-doped zinc oxide (AZO) thin films can be improved by controlling their crystal orientation. The crystal orientation of the AZO films was changed by changing the temperature of the laser deposition process on LaAlO3 (100) substrates. The change in surface termination of the LaAlO3 substrate with temperature induces a change in AZO film orientation. The anisotropic nature of electrical conductivity and Seebeck coefficient of the AZO films showed a favored thermoelectric performance in c-axis oriented films. These films gave the highest power factor of 0.26 W m−1 K−1 at 740 K.

Thickness-modulated anisotropic ferromagnetism in Fe-doped epitaxial HfO2 thin films

Science.gov (United States)

Liu, Wenlong; Liu, Ming; Zhang, Ruyi; Ma, Rong; Wang, Hong

2017-10-01

Epitaxial tetragonal Fe-doped Hf0.95Fe0.05O2 (FHO) thin films with various thicknesses were deposited on (001)-oriented NdCaAlO4 (NCAO) substrates by using a pulsed laser deposition (PLD) system. The crystal structure and epitaxial nature of the FHO thin films were confirmed by typical x-ray diffraction (XRD) θ-2θ scan and reciprocal space mapping (RSM). The results indicate that two sets of lattice sites exist with two different crystal orientations [(001) and (100)] in the thicker FHO thin films. Further, the intensity of the (100) direction increases with the increase in thicknesses, which should have a significant effect on the anisotropic magnetization of the FHO thin films. Meanwhile, all the FHO thin films possess a tetragonal phase structure. An anisotropy behavior in magnetization has been observed in the FHO thin films. The anisotropic magnetization of the FHO thin films is slowly weakened as the thickness increases. Meanwhile, the saturation magnetization (Ms) of both in-plane and out-of-plane decreases with the increase in the thickness. The change in the anisotropic magnetization and Ms is attributed to the crystal lattice and the variation in the valence of Fe ions. These results indicate that the thickness-modulated anisotropic ferromagnetism of the tetragonal FHO epitaxial thin films is of potential use for the integration of metal-oxide semiconductors with spintronics.

Pattern formation of a nonlocal, anisotropic interaction model

KAUST Repository

Burger, Martin

2017-11-24

We consider a class of interacting particle models with anisotropic, repulsive–attractive interaction forces whose orientations depend on an underlying tensor field. An example of this class of models is the so-called Kücken–Champod model describing the formation of fingerprint patterns. This class of models can be regarded as a generalization of a gradient flow of a nonlocal interaction potential which has a local repulsion and a long-range attraction structure. In contrast to isotropic interaction models the anisotropic forces in our class of models cannot be derived from a potential. The underlying tensor field introduces an anisotropy leading to complex patterns which do not occur in isotropic models. This anisotropy is characterized by one parameter in the model. We study the variation of this parameter, describing the transition between the isotropic and the anisotropic model, analytically and numerically. We analyze the equilibria of the corresponding mean-field partial differential equation and investigate pattern formation numerically in two dimensions by studying the dependence of the parameters in the model on the resulting patterns.

Pattern formation of a nonlocal, anisotropic interaction model

KAUST Repository

Burger, Martin; Dü ring, Bertram; Kreusser, Lisa Maria; Markowich, Peter A.; Schö nlieb, Carola-Bibiane

2017-01-01

We consider a class of interacting particle models with anisotropic, repulsive–attractive interaction forces whose orientations depend on an underlying tensor field. An example of this class of models is the so-called Kücken–Champod model describing the formation of fingerprint patterns. This class of models can be regarded as a generalization of a gradient flow of a nonlocal interaction potential which has a local repulsion and a long-range attraction structure. In contrast to isotropic interaction models the anisotropic forces in our class of models cannot be derived from a potential. The underlying tensor field introduces an anisotropy leading to complex patterns which do not occur in isotropic models. This anisotropy is characterized by one parameter in the model. We study the variation of this parameter, describing the transition between the isotropic and the anisotropic model, analytically and numerically. We analyze the equilibria of the corresponding mean-field partial differential equation and investigate pattern formation numerically in two dimensions by studying the dependence of the parameters in the model on the resulting patterns.

Is gaze following purely reflexive or goal-directed instead? Revisiting the automaticity of orienting attention by gaze cues.

Science.gov (United States)

Ricciardelli, Paola; Carcagno, Samuele; Vallar, Giuseppe; Bricolo, Emanuela

2013-01-01

Distracting gaze has been shown to elicit automatic gaze following. However, it is still debated whether the effects of perceived gaze are a simple automatic spatial orienting response or are instead sensitive to the context (i.e. goals and task demands). In three experiments, we investigated the conditions under which gaze following occurs. Participants were instructed to saccade towards one of two lateral targets. A face distracter, always present in the background, could gaze towards: (a) a task-relevant target--("matching" goal-directed gaze shift)--congruent or incongruent with the instructed direction, (b) a task-irrelevant target, orthogonal to the one instructed ("non-matching" goal-directed gaze shift), or (c) an empty spatial location (no-goal-directed gaze shift). Eye movement recordings showed faster saccadic latencies in correct trials in congruent conditions especially when the distracting gaze shift occurred before the instruction to make a saccade. Interestingly, while participants made a higher proportion of gaze-following errors (i.e. errors in the direction of the distracting gaze) in the incongruent conditions when the distracter's gaze shift preceded the instruction onset indicating an automatic gaze following, they never followed the distracting gaze when it was directed towards an empty location or a stimulus that was never the target. Taken together, these findings suggest that gaze following is likely to be a product of both automatic and goal-driven orienting mechanisms.

Social Studies Oriented Achievement Goal Scale (SOAGS: Validity and Reliability Study

Directory of Open Access Journals (Sweden)

Melehat GEZER

2016-12-01

Full Text Available This study aims to develop a valid and reliable instrument for measuring students' social studies achievement goal. The research was conducted on a study group consisted of 374 middle school students studying in the central district of Diyarbakır in 2014-2015 school year fall semester. Expert opinion was consulted with regard to the scale's content and face validity. Exploratory Factor Analysis (EFA and Confirmatory Factor Analysis (CFA were performed in order to measure the scale's construct validity. As a result of EFA, a 29-item and a six-factor structure model which explains 50.82% of the total variance was obtained. The emerging factors were called as a self-approach, task-approach, other-approach, task-avoidance, other-avoidance and self-avoidance respectively. The findings acquired CFA indicated that the 29-item and six-factor structure related to social studies oriented achievement goal scale have acceptable goodness of fit indices. The scale's reliability coefficients were calculated by means of internal consistency method. As a result of reliability analysis, it was determined that the reliability coefficients were within admissible limits. The finding of the item correlation and 27% of upper and lower group comparisons demonstrated that all of the items in the scale should remain. In light of these results, it could be argued that the scale is reliable and valid instrument and can be used in order to test students' social studies achievement goals.

Selective optical transmission in anisotropic multilayers structure

International Nuclear Information System (INIS)

Ouchani, N.; Bria, D.; Nougaoui, A.; Merad, A.E.

2007-08-01

We developed a Green's function method to study theoretically a single-defect photonic crystal composed of anisotropic dielectric materials. This structure can trap light of a given frequency range and filter only a certain frequency light with a very high quality. It is shown that the defect modes appear as peaks in the transmission spectrum. Their intensities and frequency positions depend on the incidence angle and the orientation of the principal axes of layers consisting of the superlattice and the layer defect. Our structure offers a great variety of possibilities for creating and controlling the number and transmitted intensities of defect modes. It can be a good candidate for realizing a selective electromagnetic filter. In addition to this filtration process, the defective anisotropic photonic crystal can be used to switch the modes when appropriate geometry is selected. (author)

Evaluation of Beckman Coulter DxI 800 immunoassay system using clinically oriented performance goals.

Science.gov (United States)

Akbas, Neval; Schryver, Patricia G; Algeciras-Schimnich, Alicia; Baumann, Nikola A; Block, Darci R; Budd, Jeffrey R; Gaston, S J Stephen; Klee, George G

2014-11-01

We evaluated the analytical performance of 24 immunoassays using the Beckman Coulter DxI 800 immunoassay systems at Mayo Clinic, Rochester, MN for trueness, precision, detection limits, linearity, and consistency (across instruments and reagent lots). Clinically oriented performance goals were defined using the following methods: trueness-published desirable accuracy limits, precision-published desirable biologic variation; detection limits - 0.1 percentile of patient test values, linearity - 50% of total error, and consistency-percentage test values crossing key decision points. Local data were collected for precision, linearity, and consistency. Data were provided by Beckman Coulter, Inc. for trueness and detection limits. All evaluated assays except total thyroxine were within the proposed goals for trueness. Most of the assays met the proposed goals for precision (86% of intra-assay results and 75% of inter-assay results). Five assays had more than 15% of the test results below the minimum detection limits. Carcinoembryonic antigen, total thyroxine and free triiodothyronine exceeded the proposed goals of ±6.3%, ±5% and ±5.7% for dilution linearity. All evaluated assays were within the proposed goals for instrument consistency. Lot-to-lot consistency results for cortisol, ferritin and total thyroxine exceeded the proposed goals of 3.3%, 11.4% and 7% at one medical decision level, while vitamin B12 exceeded the proposed goals of 5.2% and 3.8% at two decision levels. The Beckman Coulter DxI 800 immunoassay system meets most of these proposed goals, even though these clinically focused performance goals represent relatively stringent limits. Copyright © 2014 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

Solution verification, goal-oriented adaptive methods for stochastic advection–diffusion problems

KAUST Repository

Almeida, Regina C.

2010-08-01

A goal-oriented analysis of linear, stochastic advection-diffusion models is presented which provides both a method for solution verification as well as a basis for improving results through adaptation of both the mesh and the way random variables are approximated. A class of model problems with random coefficients and source terms is cast in a variational setting. Specific quantities of interest are specified which are also random variables. A stochastic adjoint problem associated with the quantities of interest is formulated and a posteriori error estimates are derived. These are used to guide an adaptive algorithm which adjusts the sparse probabilistic grid so as to control the approximation error. Numerical examples are given to demonstrate the methodology for a specific model problem. © 2010 Elsevier B.V.

Solution verification, goal-oriented adaptive methods for stochastic advection–diffusion problems

KAUST Repository

Almeida, Regina C.; Oden, J. Tinsley

2010-01-01

A goal-oriented analysis of linear, stochastic advection-diffusion models is presented which provides both a method for solution verification as well as a basis for improving results through adaptation of both the mesh and the way random variables are approximated. A class of model problems with random coefficients and source terms is cast in a variational setting. Specific quantities of interest are specified which are also random variables. A stochastic adjoint problem associated with the quantities of interest is formulated and a posteriori error estimates are derived. These are used to guide an adaptive algorithm which adjusts the sparse probabilistic grid so as to control the approximation error. Numerical examples are given to demonstrate the methodology for a specific model problem. © 2010 Elsevier B.V.

Pre-Service EFL Teachers' Self-Efficacy Beliefs, Goal Orientations, and Participations in an Online Learning Environment

Science.gov (United States)

Ucar, Hasan; Yazici Bozkaya, Mujgan

2016-01-01

This study examined the pre-service EFL teachers' self-efficacy beliefs, goal orientations, and participations in an online learning environment. Embedded mixed design was used in the study. In the quantitative part of the study, the participants were 186 senior pre-service EFL teachers and data were collected on two scales and a questionnaire.…

Gender Differences in Self-Concept, Locus of Control, and Goal Orientation in Mexican High-Achieving Students

Science.gov (United States)

Valdés-Cuervo, Angel Alberto; Sánchez Escobedo, Pedro Antonio; Valadez-Sierra, María Dolores

2015-01-01

The study compares self-concept, locus of control, and goal orientation characteristics of male and female Mexican high school high-achieving students. Three scales were administered to 220 students; 106 (49%) were males and 114 (51%) females. By means of a discriminant analysis, both groups were compared in relation to the variables such as…

Homogenization of linearly anisotropic scattering cross sections in a consistent B1 heterogeneous leakage model

International Nuclear Information System (INIS)

Marleau, G.; Debos, E.

1998-01-01

One of the main problems encountered in cell calculations is that of spatial homogenization where one associates to an heterogeneous cell an homogeneous set of cross sections. The homogenization process is in fact trivial when a totally reflected cell without leakage is fully homogenized since it involved only a flux-volume weighting of the isotropic cross sections. When anisotropic leakages models are considered, in addition to homogenizing isotropic cross sections, the anisotropic scattering cross section must also be considered. The simple option, which consists of using the same homogenization procedure for both the isotropic and anisotropic components of the scattering cross section, leads to inconsistencies between the homogeneous and homogenized transport equation. Here we will present a method for homogenizing the anisotropic scattering cross sections that will resolve these inconsistencies. (author)

Error estimation for goal-oriented spatial adaptivity for the SN equations on triangular meshes

International Nuclear Information System (INIS)

Lathouwers, D.

2011-01-01

In this paper we investigate different error estimation procedures for use within a goal oriented adaptive algorithm for the S N equations on unstructured meshes. The method is based on a dual-weighted residual approach where an appropriate adjoint problem is formulated and solved in order to obtain the importance of residual errors in the forward problem on the specific goal of interest. The forward residuals and the adjoint function are combined to obtain both economical finite element meshes tailored to the solution of the target functional as well as providing error estimates. Various approximations made to make the calculation of the adjoint angular flux more economically attractive are evaluated by comparing the performance of the resulting adaptive algorithm and the quality of the error estimators when applied to two shielding-type test problems. (author)

Microseismic Full Waveform Modeling in Anisotropic Media with Moment Tensor Implementation

Science.gov (United States)

Shi, Peidong; Angus, Doug; Nowacki, Andy; Yuan, Sanyi; Wang, Yanyan

2018-03-01

Seismic anisotropy which is common in shale and fractured rocks will cause travel-time and amplitude discrepancy in different propagation directions. For microseismic monitoring which is often implemented in shale or fractured rocks, seismic anisotropy needs to be carefully accounted for in source location and mechanism determination. We have developed an efficient finite-difference full waveform modeling tool with an arbitrary moment tensor source. The modeling tool is suitable for simulating wave propagation in anisotropic media for microseismic monitoring. As both dislocation and non-double-couple source are often observed in microseismic monitoring, an arbitrary moment tensor source is implemented in our forward modeling tool. The increments of shear stress are equally distributed on the staggered grid to implement an accurate and symmetric moment tensor source. Our modeling tool provides an efficient way to obtain the Green's function in anisotropic media, which is the key of anisotropic moment tensor inversion and source mechanism characterization in microseismic monitoring. In our research, wavefields in anisotropic media have been carefully simulated and analyzed in both surface array and downhole array. The variation characteristics of travel-time and amplitude of direct P- and S-wave in vertical transverse isotropic media and horizontal transverse isotropic media are distinct, thus providing a feasible way to distinguish and identify the anisotropic type of the subsurface. Analyzing the travel-times and amplitudes of the microseismic data is a feasible way to estimate the orientation and density of the induced cracks in hydraulic fracturing. Our anisotropic modeling tool can be used to generate and analyze microseismic full wavefield with full moment tensor source in anisotropic media, which can help promote the anisotropic interpretation and inversion of field data.

Learning Processes of Students in Pre-Vocational Secondary Education: Relations between Goal Orientations, Information Processing Strategies and Development of Conceptual Knowledge

Science.gov (United States)

Koopman, Maaike; Den Brok, Perry; Beijaard, Douwe; Teune, Peter

2011-01-01

The purpose of this study was to investigate relations between goal orientations, information processing strategies and development of conceptual knowledge of pre-vocational secondary education students (n = 719; 14 schools). Students' preferences for certain types of goals and information processing strategies were examined using questionnaires.…

The effects of a learning-goal orientation training on self-regulation: A field experiment among unemployed job seekers

NARCIS (Netherlands)

Noordzij, G.; van Hooft, E.A.J.; van Mierlo, H.; van Dam, A.; Born, M.Ph.

2013-01-01

Finding reemployment after job loss is a complex and difficult task that requires extensive motivation and self-regulation. This study aimed to examine whether improving unemployed job seekers’ cognitive self-regulation can increase reemployment probabilities. Based on the goal orientation

The development of learning material using learning goal orientation approach in digital electronics

Science.gov (United States)

Puspitaningayu, P.; Anifah, L.; Kholis, N.

2018-01-01

Mastery of digital electronics principles is essential for future engineers in the digital era. This article describes the use of simulations in an undergraduate electrical engineering course to promote the adoption of a learning-goal orientation. This study used experimental method. This was done by providing students with a simulation environment which students freely use to experiment with various circuit models. Students were then invited to reflect on how the simulation results compare with results from lab experiments. The module got 82% of positive rating from 28 students and all of them passed in the examination with 81.8 as the average score. Those majority students were motivated by the combination of two learning goals written in the module. Moreover, they also gain the ability to design more complex systems because of their combined experience. Additionally, the module also has been validated and got 83% of reliability. The final product of this research hereafter can be recommended to be used as teaching material.

Adolescents' goal orientations for science in single-gender Israeli religious schools

Science.gov (United States)

Fortus, David; Daphna, Limor

2017-01-01

Israeli students and their families can choose between state-funded secular, religious, orthodox, and other alternative schools (e.g., Waldorf, Montessori, democratic). Earlier studies showed that the motivation to engage with science differs greatly between Israeli students in secular schools and democratic schools, with these differences being attributed to differences in school culture rather than home influence (Vedder-Weiss & Fortus, 2011, 2012). In this study we extend earlier studies by looking at religious state-funded schools that serve 18% of Israel's Jewish population. These schools provide a unique research environment since from grade 6 they are gender-separated. We examined the science-related mastery, performance-approach, and performance-avoid goal orientations, perceptions of the science teachers, parents, schools, and peers' goal emphases in relation to science of the students in these schools. We compared between students in religious schools (newly collected data) and secular schools (data reported in prior studies), and found that there is a distinct difference between these two populations that is associated with differing attitudes toward gender and science at these schools. This study provides additional evidence for the influence of culture on students' motivation to engage with science, suggests mechanisms by which this influence may occur.

Influence of Perceived Parenting Styles: Goal Orientations and Career Aspirations of High School Science Students in Thailand

Science.gov (United States)

Koul, Ravinder; Lerdpornkulrat, Thanita; Poondej, Chanut

2016-01-01

There has been considerable research interest into the relationship between the parenting styles of Asians, and student motivation and achievement. The investigation presented in this paper contributes to the literature in this area by examining the influence of perceived parenting style on goal orientations and career aspirations of a sample of…

Effective material parameter retrieval of anisotropic elastic metamaterials with inherent nonlocality

Science.gov (United States)

Lee, Hyung Jin; Lee, Heung Son; Ma, Pyung Sik; Kim, Yoon Young

2016-09-01

In this paper, the scattering (S-) parameter retrieval method is presented specifically for anisotropic elastic metamaterials; so far, no retrieval has been accomplished when elastic metamaterials exhibit fully anisotropic behavior. Complex constitutive property and intrinsic scattering behavior of elastic metamaterials make their characterization far more complicated than that for acoustic and electromagnetic metamaterials. In particular, elastic metamaterials generally exhibit anisotropic scattering behavior due to higher scattering modes associated with shear deformation. They also exhibit nonlocal responses to some degrees, which originate from strong multiple scattering interactions even in the long wavelength limit. Accordingly, the conventional S-parameter retrieval methods cannot be directly used for elastic metamaterials, because they determine only the diagonal components in effective tensor property. Also, the conventional methods simply use the analytic inversion formulae for the material characterization so that inherent nonlocality cannot be taken into account. To establish a retrieval method applicable to anisotropic elastic metamaterials, we propose an alternative S-parameter method to deal with full anisotropy of elastic metamaterials. To retrieve the whole effective anisotropic parameter, we utilize not only normal but also oblique wave incidences. For the retrieval, we first retrieve the ratio of the effective stiffness tensor to effective density and then determine the effective density. The proposed retrieval method is validated by characterizing the effective material parameters of various types of non-resonant anisotropic metamaterials. It is found that the whole effective parameters are retrieved consistently regardless of used retrieval conditions in spite of inherent nonlocality.

Buckling of anisotropic films on cylindrical substrates: insights for self-assembly fabrication of 3D helical gears

International Nuclear Information System (INIS)

Yin Jie; Chen Xi

2010-01-01

We propose an effective way of fabricating true three-dimensional helical gear-like structures (with inclined gear teeth) by using self-assembled stress-driven buckling of anisotropic films on compliant cylindrical substrates. Key parameters characterizing the helical undulation profile, in particular the gear teeth number and the inclined teeth angle, are investigated numerically using finite element simulations. Based on the insights from numerical calculations, a simplified theoretical model is established to effectively predict the teeth number. The results show that the anisotropic modulus ratio has a larger effect on the teeth number than the anisotropy angle. The orientation of gear teeth is related to the coupled effects of the anisotropic modulus ratio, anisotropy angle, substrate curvature and substrate aspect ratio. In general, the undulation orientation tends to be perpendicular to the direction of minimum bending stiffness in the film. The findings in this paper provide useful guidance for the self-assembly fabrication of helical gears and other 3D structures at various length scales.

Edge orientations of mechanically exfoliated anisotropic two-dimensional materials

Science.gov (United States)

Yang, Juntan; Wang, Yi; Li, Yinfeng; Gao, Huajian; Chai, Yang; Yao, Haimin

2018-03-01

Mechanical exfoliation is an approach widely applied to prepare high-quality two-dimensional (2D) materials for investigating their intrinsic physical properties. During mechanical exfoliation, in-plane cleavage results in new edges whose orientations play an important role in determining the properties of the as-exfoliated 2D materials especially those with high anisotropy. Here, we systematically investigate the factors affecting the edge orientation of 2D materials obtained by mechanical exfoliation. Our theoretical study manifests that the fractured direction during mechanical exfoliation is determined synergistically by the tearing direction and material anisotropy of fracture energy. For a specific 2D material, our theory enables us to predict the possible edge orientations of the exfoliated flakes as well as their occurring probabilities. The theoretical prediction is experimentally verified by examining the inter-edge angles of the exfoliated flakes of four typical 2D materials including graphene, MoS2, PtS2, and black phosphorus. This work not only sheds light on the mechanics of exfoliation of the 2D materials but also provides a new approach to deriving information of edge orientations of mechanically exfoliated 2D materials by data mining of their macroscopic geometric features.

Layered Black Phosphorus: Strongly Anisotropic Magnetic, Electronic, and Electron-Transfer Properties.

Science.gov (United States)

Sofer, Zdeněk; Sedmidubský, David; Huber, Štěpán; Luxa, Jan; Bouša, Daniel; Boothroyd, Chris; Pumera, Martin

2016-03-01

Layered elemental materials, such as black phosphorus, exhibit unique properties originating from their highly anisotropic layered structure. The results presented herein demonstrate an anomalous anisotropy for the electrical, magnetic, and electrochemical properties of black phosphorus. It is shown that heterogeneous electron transfer from black phosphorus to outer- and inner-sphere molecular probes is highly anisotropic. The electron-transfer rates differ at the basal and edge planes. These unusual properties were interpreted by means of calculations, manifesting the metallic character of the edge planes as compared to the semiconducting properties of the basal plane. This indicates that black phosphorus belongs to a group of materials known as topological insulators. Consequently, these effects render the magnetic properties highly anisotropic, as both diamagnetic and paramagnetic behavior can be observed depending on the orientation in the magnetic field. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Observation of changing crystal orientations during grain coarsening

International Nuclear Information System (INIS)

Sharma, Hemant; Huizenga, Richard M.; Bytchkov, Aleksei; Sietsma, Jilt; Offerman, S. Erik

2012-01-01

Understanding the underlying mechanisms of grain coarsening is important in controlling the properties of metals, which strongly depend on the microstructure that forms during the production process or during use at high temperature. Grain coarsening of austenite at 1273 K in a binary Fe–2 wt.% Mn alloy was studied using synchrotron radiation. Evolution of the volume, average crystallographic orientation and mosaicity of more than 2000 individual austenite grains was tracked during annealing. It was found that an approximately linear relationship exists between grain size and mosaicity, which means that orientation gradients are present in the grains. The orientation gradients remain constant during coarsening and consequently the character of grain boundaries changes during coarsening, affecting the coarsening rate. Furthermore, changes in the average orientation of grains during coarsening were observed. The changes could be understood by taking the observed orientation gradients and anisotropic movement of grain boundaries into account. Five basic modes of grain coarsening were deduced from the measurements, which include: anisotropic (I) and isotropic (II) growth (or shrinkage); movement of grain boundaries resulting in no change in volume but a change in shape (III); movement of grain boundaries resulting in no change in volume and mosaicity, but a change in crystallographic orientation (IV); no movement of grain boundaries (V).

Generational differences in young adults' life goals, concern for others, and civic orientation, 1966-2009.

Science.gov (United States)

Twenge, Jean M; Campbell, W Keith; Freeman, Elise C

2012-05-01

Three studies examined generational differences in life goals, concern for others, and civic orientation among American high school seniors (Monitoring the Future; N = 463,753, 1976-2008) and entering college students (The American Freshman; N = 8.7 million, 1966-2009). Compared to Baby Boomers (born 1946-1961) at the same age, GenX'ers (born 1962-1981) and Millennials (born after 1982) considered goals related to extrinsic values (money, image, fame) more important and those related to intrinsic values (self-acceptance, affiliation, community) less important. Concern for others (e.g., empathy for outgroups, charity donations, the importance of having a job worthwhile to society) declined slightly. Community service rose but was also increasingly required for high school graduation over the same time period. Civic orientation (e.g., interest in social problems, political participation, trust in government, taking action to help the environment and save energy) declined an average of d = -.34, with about half the decline occurring between GenX and the Millennials. Some of the largest declines appeared in taking action to help the environment. In most cases, Millennials slowed, though did not reverse, trends toward reduced community feeling begun by GenX. The results generally support the "Generation Me" view of generational differences rather than the "Generation We" or no change views.

Quantum computation in semiconductor quantum dots of electron-spin asymmetric anisotropic exchange

International Nuclear Information System (INIS)

Hao Xiang; Zhu Shiqun

2007-01-01

The universal quantum computation is obtained when there exists asymmetric anisotropic exchange between electron spins in coupled semiconductor quantum dots. The asymmetric Heisenberg model can be transformed into the isotropic model through the control of two local unitary rotations for the realization of essential quantum gates. The rotations on each qubit are symmetrical and depend on the strength and orientation of asymmetric exchange. The implementation of the axially symmetric local magnetic fields can assist the construction of quantum logic gates in anisotropic coupled quantum dots. This proposal can efficiently use each physical electron spin as a logical qubit in the universal quantum computation

Double-grooved nanofibre surfaces with enhanced anisotropic hydrophobicity.

Science.gov (United States)

Liang, Meimei; Chen, Xin; Xu, Yang; Zhu, Lei; Jin, Xiangyu; Huang, Chen

2017-11-02

This study reports a facile method for fabricating double-grooved fibrous surfaces. The primary grooves of the surface are formed by aligned fibres, while the secondary grooves are achieved by oriented nanogrooves on the fibre surface. Investigation into the formation mechanism reveals that the nanogrooves can be readily tailored through adjusting the solvent ratio and relative humidity. With this understanding, a variety of polymers have been successfully electrospun into fibres having the same nanogrooved feature. These fibres show high resemblance to natural hierarchical structures, and thereby endowing the corresponding double-grooved surface with enhanced anisotropic hydrophobicity. A water droplet at a parallel direction to the grooves exhibits a much higher contact angle and a lower roll-off angle than the droplet at a perpendicular direction. The application potential of such anisotropic hydrophobicity has been demonstrated via a fog collection experiment, in which the double-grooved surface can harvest the largest amount of water. Moreover, the fabrication method requires neither post-treatment nor sophisticated equipment, making us anticipate that the double-grooved surface would be competitive in areas where a highly ordered surface, a large surface area and an anisotropic hydrophobicity are preferred.

Motivational Regulations and Goal Orientation in Division III Basketball Players: Gender and Playing Status Differences

Directory of Open Access Journals (Sweden)

Teri J. Hepler

2016-04-01

Full Text Available Objective: The purpose of this study was to examine differences in motivational regulations and goal orientation based on gender and playing status.  Method:  Two hundred and fourteen Division III basketball players (92 males, 112 females completed the Sport Motivation Scale-28 and the Task and Ego Orientation in Sport.  Based on average playing time per game, participants were classified as starters (over 20 minutes, n = 80, substitutes (6-20 minutes, n = 65, and benchwarmers (5 minutes or less, n = 63.  Results: Results indicated that males scored higher than females on external regulation, substitutes scored higher than starters on all 3 dimensions of extrinsic motivation, and benchwarmers expressed the most amotivation.  Task orientation was positively related to all types of intrinsic and extrinsic motivation. Conclusion: While coaches should strive to enhance the intrinsic motivation in all of their athletes, special emphasis should be placed on promoting intrinsic motivation of male athletes and substitutes.   Keywords:  motives, playing time, sex differences

Predicting Academic Self-Handicapping in Different Age Groups: The Role of Personal Achievement Goals and Social Goals

Science.gov (United States)

Leondari, Angeliki; Gonida, Eleftheria

2007-01-01

Background: Academic self-handicapping refers to the use of impediments to successful performance on academic tasks. Previous studies have shown that it is related to personal achievement goals. A performance goal orientation is a positive predictor of self-handicapping, whereas a task goal orientation is unrelated to self-handicapping. Aims: The…

Surface instabilities during straining of anisotropic materials

DEFF Research Database (Denmark)

Legarth, Brian Nyvang; Richelsen, Ann Bettina

2006-01-01

The development of instabilities in traction-free surfaces is investigated numerically using a unit cell model. Full finite strain analyses are conducted using isotropic as well as anisotropic yield criteria and both plane strain tension and compression are considered. In the load range of tensio...... of principal overall strain. For other orientations surface instabilities are seen when non-associated plastic flow is taken into account. Compared to tension, smaller compressive deformations are needed in order to initiate a surface instability....

Short intergranular cracks in the piecewise anisotropic continuum model of the microstructure

International Nuclear Information System (INIS)

Cizelj, L.; Kovse, I.

2001-01-01

Computational algorithms aiming at modeling and visualization of the initiation and growth of intergranular stress corrosion cracks (e.g., in the steam generator tubes) on the grain-size scale have already been proposed [6]. The main focus of the paper is given to the influence of randomly oriented neighboring grains on the microscopic stress fields at crack tips. The incompatibility strains, which develop along the boundaries of randomly oriented anisotropic grains, are shown to influence the local stress fields at crack tips significantly. Special attention has been paid to the implementation and comparison of different numerical methods estimating the local stress fields at crack tips, aiming at optimizing the computational time and the numerical accuracy of the results. The limited number of calculations indicate that the anisotropic arrangement of grains with local incompatibility strains causes on average about 10% (plane strain) and 26% (plane stress) higher J-integral values at the crack tips than expected from the calculations in the isotropic case.(author)

Three-dimensional anisotropic adaptive filtering of projection data for noise reduction in cone beam CT

Energy Technology Data Exchange (ETDEWEB)

Maier, Andreas; Wigstroem, Lars; Hofmann, Hannes G.; Hornegger, Joachim; Zhu Lei; Strobel, Norbert; Fahrig, Rebecca [Department of Radiology, Stanford University, Stanford, California 94305 (United States); Department of Radiology, Stanford University, Stanford, California 94305 (United States) and Center for Medical Image Science and Visualization, Linkoeping University, Linkoeping (Sweden); Pattern Recognition Laboratory, Department of Computer Science, Friedrich-Alexander University of Erlangen-Nuremberg, 91054, Erlangen (Germany); Nuclear and Radiological Engineering and Medical Physics Programs, George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332 (United States); Siemens AG Healthcare, Forchheim 91301 (Germany); Department of Radiology, Stanford University, Stanford, California 94305 (United States)

2011-11-15

Purpose: The combination of quickly rotating C-arm gantry with digital flat panel has enabled the acquisition of three-dimensional data (3D) in the interventional suite. However, image quality is still somewhat limited since the hardware has not been optimized for CT imaging. Adaptive anisotropic filtering has the ability to improve image quality by reducing the noise level and therewith the radiation dose without introducing noticeable blurring. By applying the filtering prior to 3D reconstruction, noise-induced streak artifacts are reduced as compared to processing in the image domain. Methods: 3D anisotropic adaptive filtering was used to process an ensemble of 2D x-ray views acquired along a circular trajectory around an object. After arranging the input data into a 3D space (2D projections + angle), the orientation of structures was estimated using a set of differently oriented filters. The resulting tensor representation of local orientation was utilized to control the anisotropic filtering. Low-pass filtering is applied only along structures to maintain high spatial frequency components perpendicular to these. The evaluation of the proposed algorithm includes numerical simulations, phantom experiments, and in-vivo data which were acquired using an AXIOM Artis dTA C-arm system (Siemens AG, Healthcare Sector, Forchheim, Germany). Spatial resolution and noise levels were compared with and without adaptive filtering. A human observer study was carried out to evaluate low-contrast detectability. Results: The adaptive anisotropic filtering algorithm was found to significantly improve low-contrast detectability by reducing the noise level by half (reduction of the standard deviation in certain areas from 74 to 30 HU). Virtually no degradation of high contrast spatial resolution was observed in the modulation transfer function (MTF) analysis. Although the algorithm is computationally intensive, hardware acceleration using Nvidia's CUDA Interface provided an 8

Three-dimensional anisotropic adaptive filtering of projection data for noise reduction in cone beam CT

International Nuclear Information System (INIS)

Maier, Andreas; Wigstroem, Lars; Hofmann, Hannes G.; Hornegger, Joachim; Zhu Lei; Strobel, Norbert; Fahrig, Rebecca

2011-01-01

Purpose: The combination of quickly rotating C-arm gantry with digital flat panel has enabled the acquisition of three-dimensional data (3D) in the interventional suite. However, image quality is still somewhat limited since the hardware has not been optimized for CT imaging. Adaptive anisotropic filtering has the ability to improve image quality by reducing the noise level and therewith the radiation dose without introducing noticeable blurring. By applying the filtering prior to 3D reconstruction, noise-induced streak artifacts are reduced as compared to processing in the image domain. Methods: 3D anisotropic adaptive filtering was used to process an ensemble of 2D x-ray views acquired along a circular trajectory around an object. After arranging the input data into a 3D space (2D projections + angle), the orientation of structures was estimated using a set of differently oriented filters. The resulting tensor representation of local orientation was utilized to control the anisotropic filtering. Low-pass filtering is applied only along structures to maintain high spatial frequency components perpendicular to these. The evaluation of the proposed algorithm includes numerical simulations, phantom experiments, and in-vivo data which were acquired using an AXIOM Artis dTA C-arm system (Siemens AG, Healthcare Sector, Forchheim, Germany). Spatial resolution and noise levels were compared with and without adaptive filtering. A human observer study was carried out to evaluate low-contrast detectability. Results: The adaptive anisotropic filtering algorithm was found to significantly improve low-contrast detectability by reducing the noise level by half (reduction of the standard deviation in certain areas from 74 to 30 HU). Virtually no degradation of high contrast spatial resolution was observed in the modulation transfer function (MTF) analysis. Although the algorithm is computationally intensive, hardware acceleration using Nvidia's CUDA Interface provided an 8.9-fold

Modeling the Infrared Reverberation Response of the Circumnuclear Dusty Torus in AGNs: The Effects of Cloud Orientation and Anisotropic Illumination

International Nuclear Information System (INIS)

Almeyda, Triana; Robinson, Andrew; Richmond, Michael; Vazquez, Billy; Nikutta, Robert

2017-01-01

The obscuring circumnuclear torus of dusty molecular gas is one of the major components of active galactic nuclei (AGN). The torus can be studied by analyzing the time response of its infrared (IR) dust emission to variations in the AGN continuum luminosity, a technique known as reverberation mapping. The IR response is the convolution of the AGN ultraviolet/optical light curve with a transfer function that contains information about the size, geometry, and structure of the torus. Here, we describe a new computer model that simulates the reverberation response of a clumpy torus. Given an input optical light curve, the code computes the emission of a 3D ensemble of dust clouds as a function of time at selected IR wavelengths, taking into account light travel delays. We present simulated dust emission responses at 3.6, 4.5, and 30 μ m that explore the effects of various geometrical and structural properties, dust cloud orientation, and anisotropy of the illuminating radiation field. We also briefly explore the effects of cloud shadowing (clouds are shielded from the AGN continuum source). Example synthetic light curves have also been generated, using the observed optical light curve of the Seyfert 1 galaxy NGC 6418 as input. The torus response is strongly wavelength-dependent, due to the gradient in cloud surface temperature within the torus, and because the cloud emission is strongly anisotropic at shorter wavelengths. Anisotropic illumination of the torus also significantly modifies the torus response, reducing the lag between the IR and optical variations.

Modeling the Infrared Reverberation Response of the Circumnuclear Dusty Torus in AGNs: The Effects of Cloud Orientation and Anisotropic Illumination

Energy Technology Data Exchange (ETDEWEB)

Almeyda, Triana; Robinson, Andrew; Richmond, Michael; Vazquez, Billy [School of Physics and Astronomy, Rochester Institute of Technology, Rochester, NY 14623 (United States); Nikutta, Robert, E-mail: tra3595@rit.edu [National Optical Astronomy Observatory, 950 N Cherry Ave, Tucson, AZ 85719 (United States)

2017-07-01

The obscuring circumnuclear torus of dusty molecular gas is one of the major components of active galactic nuclei (AGN). The torus can be studied by analyzing the time response of its infrared (IR) dust emission to variations in the AGN continuum luminosity, a technique known as reverberation mapping. The IR response is the convolution of the AGN ultraviolet/optical light curve with a transfer function that contains information about the size, geometry, and structure of the torus. Here, we describe a new computer model that simulates the reverberation response of a clumpy torus. Given an input optical light curve, the code computes the emission of a 3D ensemble of dust clouds as a function of time at selected IR wavelengths, taking into account light travel delays. We present simulated dust emission responses at 3.6, 4.5, and 30 μ m that explore the effects of various geometrical and structural properties, dust cloud orientation, and anisotropy of the illuminating radiation field. We also briefly explore the effects of cloud shadowing (clouds are shielded from the AGN continuum source). Example synthetic light curves have also been generated, using the observed optical light curve of the Seyfert 1 galaxy NGC 6418 as input. The torus response is strongly wavelength-dependent, due to the gradient in cloud surface temperature within the torus, and because the cloud emission is strongly anisotropic at shorter wavelengths. Anisotropic illumination of the torus also significantly modifies the torus response, reducing the lag between the IR and optical variations.

ANALISIS PENGARUH GOAL ORIENTATION DAN WORK MOTIVATION TERHADAP WORK ROLE INNOVATION DENGAN SELF-LEADERSHIP SEBAGAI MEDIATOR; STUDI PADA PERUSAHAAN MEDIA (PT. SURYA CITRA TELEVISI)

OpenAIRE

Masruroh; Andana Sasriya

2015-01-01

This research has an aim to discover an understand the influence of Goal Orientation and Work Motivation against Work Role Innovation through Self-leadership at PT. Surya Citra Televisi. PT. Surya Citra Televisi engaged in TV broadcasting sector. To see the influence of Goal Orientation and Work Motivation against Work Role Innovation through Self-leadership, this research use a quantitative approach where questionaire used to collect data from a total of 150 employees correspondent and the r...

Anisotropic response of the moving vortex lattice in superconducting Mo(1-x)Gex amorphous films

International Nuclear Information System (INIS)

Dolz, M.I.; Shalóm, D.E.; Pastoriza, H.; López, D.O.

2012-01-01

We have performed magnetic susceptibility measurements in Mo 1-x Ge x amorphous thin films biased with an electrical current using anisotropic coils. We tested the symmetry of the vortex response changing the relative orientation between the bias current and the susceptibility coils. We found a region in the DC current-temperature phase diagram where the dynamical vortex structures behave anisotropically. In this region the shielding capability of the superconducting currents measured by the susceptibility coils is less effective along the direction of vortex motion compared to the transverse direction. This anisotropic response is found in the same region where the peak effect in the critical current is developed. On rising temperature the isotropic behavior is recovered.

Goal-orientated cognitive rehabilitation for dementias associated with Parkinson's disease-A pilot randomised controlled trial.

Science.gov (United States)

Hindle, John V; Watermeyer, Tamlyn J; Roberts, Julie; Brand, Andrew; Hoare, Zoe; Martyr, Anthony; Clare, Linda

2018-05-01

To examine the appropriateness and feasibility of cognitive rehabilitation for people with dementias associated with Parkinson's in a pilot randomised controlled study. This was a single-blind pilot randomised controlled trial of goal-oriented cognitive rehabilitation for dementias associated with Parkinson's. After goal setting, participants were randomised to cognitive rehabilitation (n = 10), relaxation therapy (n = 10), or treatment-as-usual (n = 9). Primary outcomes were ratings of goal attainment and satisfaction with goal attainment. Secondary outcomes included quality of life, mood, cognition, health status, everyday functioning, and carers' ratings of goal attainment and their own quality of life and stress levels. Assessments were at 2 and 6 months following randomisation. At 2 months, cognitive rehabilitation was superior to treatment-as-usual and relaxation therapy for the primary outcomes of self-rated goal attainment (d = 1.63 and d = 1.82, respectively) and self-rated satisfaction with goal attainment (d = 2.04 and d = 1.84). At 6 months, cognitive rehabilitation remained superior to treatment-as-usual (d = 1.36) and relaxation therapy (d = 1.77) for self-rated goal attainment. Cognitive rehabilitation was superior to treatment as usual and/or relaxation therapy in a number of secondary outcomes at 2 months (mood, self-efficacy, social domain of quality of life, carers' ratings of participants' goal attainment) and at 6 months (delayed recall, health status, quality of life, carer ratings of participants' goal attainment). Carers receiving cognitive rehabilitation reported better quality of life, health status, and lower stress than those allocated to treatment-as-usual. Cognitive rehabilitation is feasible and potentially effective for dementias associated with Parkinson's disease. Copyright © 2018 John Wiley & Sons, Ltd.

Learning processes of students in competence-based pre-vocational secondary education: relations between goal orientations, information processing strategies and development of conceptual knowledge

NARCIS (Netherlands)

Dr. M. Koopman; prof dr Douwe Beijaard; Dr P.J. Teune; P. den Brok

2011-01-01

The purpose of this study was to investigate relations between goal orientations, information processing strategies and development of conceptual knowledge of pre-vocational secondary education students (n=719; 14 schools). Students' preferences for certain types of goals and information processing

Anisotropy model for modern grain oriented electrical steel based on orientation distribution function

Directory of Open Access Journals (Sweden)

Fan Jiang

2018-05-01

Full Text Available Accurately modeling the anisotropic behavior of electrical steel is mandatory in order to perform good end simulations. Several approaches can be found in the literature for that purpose but the more often those methods are not able to deal with grain oriented electrical steel. In this paper, a method based on orientation distribution function is applied to modern grain oriented laminations. In particular, two solutions are proposed in order to increase the results accuracy. The first one consists in increasing the decomposition number of the cosine series on which the method is based. The second one consists in modifying the determination method of the terms belonging to this cosine series.

Goal-oriented failure analysis - a systems analysis approach to hazard identification

International Nuclear Information System (INIS)

Reeves, A.B.; Davies, J.; Foster, J.; Wells, G.L.

1990-01-01

Goal-Oriented Failure Analysis, GOFA, is a methodology which is being developed to identify and analyse the potential failure modes of a hazardous plant or process. The technique will adopt a structured top-down approach, with a particular failure goal being systematically analysed. A systems analysis approach is used, with the analysis being organised around a systems diagram of the plant or process under study. GOFA will also use checklists to supplement the analysis -these checklists will be prepared in advance of a group session and will help to guide the analysis and avoid unnecessary time being spent on identifying obvious failure modes or failing to identify certain hazards or failures. GOFA is being developed with the aim of providing a hazard identification methodology which is more efficient and stimulating than the conventional approach to HAZOP. The top-down approach should ensure that the analysis is more focused and the use of a systems diagram will help to pull the analysis together at an early stage whilst also helping to structure the sessions in a more stimulating way than the conventional techniques. GOFA will be, essentially, an extension of the HAZOP methodology. GOFA is currently being computerised using a knowledge-based systems approach for implementation. The Goldworks II expert systems development tool is being used. (author)

Magnetic Cellulose Nanocrystal Based Anisotropic Polylactic Acid Nanocomposite Films: Influence on Electrical, Magnetic, Thermal, and Mechanical Properties.

Science.gov (United States)

Dhar, Prodyut; Kumar, Amit; Katiyar, Vimal

2016-07-20

This paper reports a single-step co-precipitation method for the fabrication of magnetic cellulose nanocrystals (MGCNCs) with high iron oxide nanoparticle content (∼51 wt % loading) adsorbed onto cellulose nanocrystals (CNCs). X-ray diffraction (XRD), Fourier transform infrared (FTIR), and Raman spectroscopic studies confirmed that the hydroxyl groups on the surface of CNCs (derived from the bamboo pulp) acted as anchor points for the adsorption of Fe3O4 nanoparticles. The fabricated MGCNCs have a high magnetic moment, which is utilized to orient the magnetoresponsive nanofillers in parallel or perpendicular orientations inside the polylactic acid (PLA) matrix. Magnetic-field-assisted directional alignment of MGCNCs led to the incorporation of anisotropic mechanical, thermal, and electrical properties in the fabricated PLA-MGCNC nanocomposites. Thermomechanical studies showed significant improvement in the elastic modulus and glass-transition temperature for the magnetically oriented samples. Differential scanning calorimetry (DSC) and XRD studies confirmed that the alignment of MGCNCs led to the improvement in the percentage crystallinity and, with the absence of the cold-crystallization phenomenon, finds a potential application in polymer processing in the presence of magnetic field. The tensile strength and percentage elongation for the parallel-oriented samples improved by ∼70 and 240%, respectively, and for perpendicular-oriented samples, by ∼58 and 172%, respectively, in comparison to the unoriented samples. Furthermore, its anisotropically induced electrical and magnetic properties are desirable for fabricating self-biased electronics products. We also demonstrate that the fabricated anisotropic PLA-MGCNC nanocomposites could be laminated into films with the incorporation of directionally tunable mechanical properties. Therefore, the current study provides a novel noninvasive approach of orienting nontoxic bioderived CNCs in the presence of low

Anisotropic amplitude variation of the bottom-simulating reflector beneath fracture-filled gas hydrate deposit

Digital Repository Service at National Institute of Oceanography (India)

Sriram, G.; Dewangan, P.; Ramprasad, T.; RamaRao, P.

. Anisotropic AVA analysis of the BSR from the inline seismic profile shows 5-30 percent gas hydrate concentration (equivalent to fracture density) and the azimuth of fracture system (fracture orientation) with respect to the seismic profile is close to 45...

Gender, level of participation, and type of sport: differences in achievement goal orientation and attributional style.

Science.gov (United States)

Hanrahan, Stephanie J; Cerin, Ester

2009-07-01

Findings regarding gender differences in achievement goal orientations and attributional style have been somewhat inconsistent. One possible explanation for varied findings is that potentially confounding variables such as level of participation and type of sport have not been considered. Athletes (108 males and 164 females) from team and individual sports, competing at recreational and competitive levels, completed the Task and Ego Orientation in Sport Questionnaire, the Sport Attributional Style Scale, and a demographic questionnaire. Athletes competing in individual sports had a higher ego orientation than those from team sports, and females scored higher in task orientation than males. Individual sport athletes made more internal, stable, and global, and less externally controllable attributions for positive events, and more internal attributions for negative events than team sport athletes. Competitive female athletes made less global attributions for positive events than did recreational female athletes. This difference was not observed in male athletes. Competitive individual, but not team, athletes made less global attributions than recreational individual athletes. The significant interactions regarding globality suggest that the tradition in sport psychology attribution research to focus solely on internality, stability, and controllability may be inadequate. From an applied perspective, sport psychologists and coaches may find it beneficial to target individual sport athletes and males for interventions designed to enhance task orientation. Similarly, team sport athletes may be appropriate as a focus for attribution retraining programs.

Stereotype threat's effect on women's achievement in chemistry: The interaction of achievement goal orientation for women in science majors

Science.gov (United States)

Conway-Klaassen, Janice Marjorie

"Stereotype threat is being at risk of confirming, as a self-characteristic, a negative stereotype about one's group" (C. M. Steele & Aronson, 1995, p. 797). A stereotype threat effect then is described as the detrimental impact on a person's performance or achievement measurements when they are placed in a stereotype threat environment. For women, the negative stereotype that exists in our culture states that women are typically not as capable as men in mathematics or science subjects. This study specifically explored the potential impact of stereotype threat on women who have chosen a science-based college major. They were tested in the domain of chemistry, which is related to mathematics and often involves high level of mathematics skills. I attempted to generate a stereotype threat in the participants through describing a chemistry challenge exam as either one that had consistently shown a gender bias against women and to create a nullification effect by describing the exam as one that had shown no gender bias in the past. In the third experimental condition acting as a control, participants received only generic instructions related to taking the test itself. The second part of this study investigated whether stereotype threat effects could impact women's achievement goal orientations. In previous studies performance avoidance goal orientations have been associated with individuals placed in a stereotype threat environment. The findings on the stereotype threat effect were not significant for the chemistry challenge test achievement scores. This may be due to several factors. One factor may be the design of the chemistry challenge test and the instructions for the test. The other factor may be the women in this study. As individuals who have chosen a science based major, they may have developed coping skills and strategies that reduced the impact of a stereotype threat. It is also possible that the testing environment itself generated an implicit stereotype

Optimization of anisotropic photonic density of states for Raman cooling of solids

Science.gov (United States)

Chen, Yin-Chung; Ghosh, Indronil; Schleife, André; Carney, P. Scott; Bahl, Gaurav

2018-04-01

Optical refrigeration of solids holds tremendous promise for applications in thermal management. It can be achieved through multiple mechanisms including inelastic anti-Stokes Brillouin and Raman scattering. However, engineering of these mechanisms remains relatively unexplored. The major challenge lies in the natural unfavorable imbalance in transition rates for Stokes and anti-Stokes scattering. We consider the influence of anisotropic photonic density of states on Raman scattering and derive expressions for cooling in such photonically anisotropic systems. We demonstrate optimization of the Raman cooling figure of merit considering all possible orientations for the material crystal and two example photonic crystals. We find that the anisotropic description of the photonic density of states and the optimization process is necessary to obtain the best Raman cooling efficiency for systems having lower symmetry. This general result applies to a wide array of other laser cooling methods in the presence of anisotropy.

When you have to climb downhill to reach the top: the effect of action versus state orientation on solvinga goal-subgoal conflict in the Tower of Hanoi task.

Science.gov (United States)

Jostmann, Nils B; Gieselmann, Annika

2014-01-01

Complex problems often include a response conflict between a subgoal and a final goal. The present experiment investigated the roles of situational demands and individual differences in self-regulation on solving goal-subgoal conflicts in a computerized Tower of Hanoi task. Action-oriented versus state-oriented individuals were randomly assigned to a demanding condition in which they deliberated about a personal decision problem, or to a nondemanding control condition. In line with expectations state-oriented individuals had greater difficulties to solve goal-subgoal conflicts in the demanding compared to the nondemanding condition. Action-oriented individuals performed well in both conditions. In line with Personality Systems Interactions theory (Kuhl, 2000) the findings show that complex problem solving depends on how well people are able to deal with situational demands.

Preferred Orientation Contribution to the Anisotropic Normal State Resistivity in Superconducting Melt-Cast Processed Bi2Sr2CaCu2O8+δ

Directory of Open Access Journals (Sweden)

Aline Dellicour

2017-05-01

Full Text Available We describe how the contribution of crystallographic texture to the anisotropy of the resistivity of polycrystalline samples can be estimated by averaging over crystallographic orientations through a geometric mean approach. The calculation takes into account the orientation distribution refined from neutron diffraction data and literature values for the single crystal resistivity tensor. The example discussed here is a melt-cast processed Bi2Sr2CaCu2O8+δ (Bi-2212 polycrystalline tube in which the main texture component is a <010> fiber texture with relatively low texture strength. Experimentally-measured resistivities along the longitudinal, radial, and tangential directions of the Bi-2212 tube were compared to calculated values and found to be of the same order of magnitude. Calculations for this example and additional simulations for various texture strengths and single crystal resistivity anisotropies confirm that in the case of highly anisotropic phases such as Bi-2212, even low texture strengths have a significant effect on the anisotropy of the resistivity in polycrystalline samples.

COMPARISON BETWEEN SPORT PARTICIPATION MOTIVATION AND GOAL-ORIENTATION OF YOUTH ATHLETES: THE ROLE OF PARENTS' EDUCATION LEVEL

Directory of Open Access Journals (Sweden)

Noshin Benar.

2012-12-01

Full Text Available The aims of present study was to (A compare and prioritizing the main six motivations of sport participation of youth athletes, (B compare and prioritize task and ego-orientation of youth athletes, and (C the role of parents' education level and its impact on the motivation of sport participation and goal-orientation youth athletes. In the study, descriptive-analytic design was applied. For the study 376 Iranian youth athletes were singled out by cluster-random sampling. They answered to participation motivation questionnaire (PMQ and task & ego-orientation in sport questionnaire (T.E.O.S.Q. Also data about parents' education level (PEL was obtained using questions about demographic features. The findings showed that those who participated in individual sports had more motivation for status than team sports athletes and they were more ego-orientation. Also it was found that more highly educated mothers came to induce internal motivation in youth athletes using Kruskal-Wallis test, whereas more highly educated fathers came to induce both internal and external motivation to them. It seems that those athletes who participated in individual and open-skilled sports are more ego-oriented than those who participated in team and open-skilled sports. The feedbacks which are based on task orientation are probably provided, along with promotion of mothers' education level; however with promotion of fathers' education level, both of these feedbacks and those based on ego-orientation will be provided, probably for their children to participation in sport activities.

Order-disorder transition of vortex matter in Mg{sub 0.9}B{sub 2}: anisotropic effects

Energy Technology Data Exchange (ETDEWEB)

Oliveira, A A M; Ortiz, W A [Grupo de Supercondutividade e Magnetismo, Departamento de Fisica, Universidade Federal de Sao Carlos, SP (Brazil); Sharma, P A; Hur, N; Cheong, S-W, E-mail: ana@df.ufscar.b, E-mail: ana@df.ufscar.b [Rutgers Center for Emergent Materials and Department of Physics and Astronomy, Rutgers, NJ (United States)

2009-03-01

Third-harmonic susceptibility studies have been employed to probe the order-disorder transition of Vortex Matter of a magnesium-deficient sample of MgB{sub 2}. Our results reveal that the measured threshold is anisotropic for different orientations of the applied magnetic field, suggesting that the pinning efficiency of the magnesium-deficient regions depend on the orientation of the penetrated vortices.

How to investigate the goal orientations of students in competence-based pre-vocational secondary education: choosing the right instrument.

NARCIS (Netherlands)

Dr. M. Koopman; prof dr Douwe Beijaard; Dr P.J. Teune

2008-01-01

This study explores the psychometric properties of three instruments: a semi-structured interview, a questionnaire and a sorting task. The central question is which instrument is most suitable to investigate the goal orientations of students in competence-based Pre-Vocational Secondary Education.

Highly anisotropic optoelectronic properties of aligned films of self-assembled platinum molecular wires

NARCIS (Netherlands)

Debije, M.G.; Haas, de M.P.; Savenije, T.J.; Warman, J.M.; Fontana, M.; Stutzmann, N.; Caseri, W.R.; Smith, P.

2003-01-01

Self-assembled columns of alternating tetrachloro- and tetraalkylaminoplatinum moieties form stable, highly oriented, optically anisotropic films on a friction-deposited polytetrafluoroethylene surface (see Figure). Charge transport in the films is rapid (mobility =¿ca. 10–2 cm2¿V–1¿s–1) and highly

Fluid driven fracture mechanics in highly anisotropic shale: a laboratory study with application to hydraulic fracturing

Science.gov (United States)

Gehne, Stephan; Benson, Philip; Koor, Nick; Enfield, Mark

2017-04-01

The finding of considerable volumes of hydrocarbon resources within tight sedimentary rock formations in the UK led to focused attention on the fundamental fracture properties of low permeability rock types and hydraulic fracturing. Despite much research in these fields, there remains a scarcity of available experimental data concerning the fracture mechanics of fluid driven fracturing and the fracture properties of anisotropic, low permeability rock types. In this study, hydraulic fracturing is simulated in a controlled laboratory environment to track fracture nucleation (location) and propagation (velocity) in space and time and assess how environmental factors and rock properties influence the fracture process and the developing fracture network. Here we report data on employing fluid overpressure to generate a permeable network of micro tensile fractures in a highly anisotropic shale ( 50% P-wave velocity anisotropy). Experiments are carried out in a triaxial deformation apparatus using cylindrical samples. The bedding planes are orientated either parallel or normal to the major principal stress direction (σ1). A newly developed technique, using a steel guide arrangement to direct pressurised fluid into a sealed section of an axially drilled conduit, allows the pore fluid to contact the rock directly and to initiate tensile fractures from the pre-defined zone inside the sample. Acoustic Emission location is used to record and map the nucleation and development of the micro-fracture network. Indirect tensile strength measurements at atmospheric pressure show a high tensile strength anisotropy ( 60%) of the shale. Depending on the relative bedding orientation within the stress field, we find that fluid induced fractures in the sample propagate in two of the three principal fracture orientations: Divider and Short-Transverse. The fracture progresses parallel to the bedding plane (Short-Transverse orientation) if the bedding plane is aligned (parallel) with the

Magnetic anisotropy induced by crystallographic orientation and morphological alignment in directionally-solidified eutectic Mn-Sb alloy

Energy Technology Data Exchange (ETDEWEB)

Lou, Chang-Sheng [School of Materials Science and Engineering, Shenyang Ligong University, Shenyang 110159 (China); Key Laboratory of Electromagnetic Processing of Materials (Ministry of Education), Northeastern University, Shenyang 110819 (China); Liu, Tie, E-mail: liutie@epm.neu.edu.cn [Key Laboratory of Electromagnetic Processing of Materials (Ministry of Education), Northeastern University, Shenyang 110819 (China); Dong, Meng; Wu, Chun; Shao, Jian-Guo; Wang, Qiang [Key Laboratory of Electromagnetic Processing of Materials (Ministry of Education), Northeastern University, Shenyang 110819 (China)

2017-02-15

The influences of the crystallographic orientation and morphological alignment upon the magnetic anisotropic behavior of polycrystalline materials were investigated. Microstructures obtained in eutectic Mn-Sb alloys via directional solidification simultaneously displayed crystallographic orientation and morphological alignment. Both the crystallographic orientation and the morphological alignment were able to induce magnetic anisotropy in the alloys, wherein the influence of the crystallographic orientation and the morphological alignment upon the magnetic anisotropic behavior of the alloys strongly depended upon their directions and exhibited either mutual promotion or competition. These findings may provide useful guidance for the fabrication design of functional magnetic materials. - Highlights: • We study effects of orientation in crystal and morphology on magnetic anisotropy. • Both orientation in crystal and morphology can induce magnetic anisotropy. • Their effects depend on direction and exhibit either mutual promotion or competition.

The effects of market orientation

OpenAIRE

Sandvik, Kåre

1998-01-01

This research is designed to accomplish three goals. The first goal is to revisit the market orientation construct in order to define the different facets of it. A review of the market orientation literature is made to assess and synthesize the stock of accumulated knowledge regarding the market orientation construct. The second goal of the research is to develop a theory of the effects ofmarket orientation. Using the literature concerning resource-based theory and organization...

Goal based mesh adaptivity for fixed source radiation transport calculations

International Nuclear Information System (INIS)

Baker, C.M.J.; Buchan, A.G.; Pain, C.C.; Tollit, B.S.; Goffin, M.A.; Merton, S.R.; Warner, P.

2013-01-01

Highlights: ► Derives an anisotropic goal based error measure for shielding problems. ► Reduces the error in the detector response by optimizing the finite element mesh. ► Anisotropic adaptivity captures material interfaces using fewer elements than AMR. ► A new residual based on the numerical scheme chosen forms the error measure. ► The error measure also combines the forward and adjoint metrics in a novel way. - Abstract: In this paper, the application of goal based error measures for anisotropic adaptivity applied to shielding problems in which a detector is present is explored. Goal based adaptivity is important when the response of a detector is required to ensure that dose limits are adhered to. To achieve this, a dual (adjoint) problem is solved which solves the neutron transport equation in terms of the response variables, in this case the detector response. The methods presented can be applied to general finite element solvers, however, the derivation of the residuals are dependent on the underlying finite element scheme which is also discussed in this paper. Once error metrics for the forward and adjoint solutions have been formed they are combined using a novel approach. The two metrics are combined by forming the minimum ellipsoid that covers both the error metrics rather than taking the maximum ellipsoid that is contained within the metrics. Another novel approach used within this paper is the construction of the residual. The residual, used to form the goal based error metrics, is calculated from the subgrid scale correction which is inherent in the underlying spatial discretisation employed

Anisotropic swim stress in active matter with nematic order

Science.gov (United States)

Yan, Wen; Brady, John F.

2018-05-01

Active Brownian particles (ABPs) transmit a swim pressure {{{\\Pi }}}{{swim}}=n\\zeta {D}{{swim}} to the container boundaries, where ζ is the drag coefficient, D swim is the swim diffusivity and n is the uniform bulk number density far from the container walls. In this work we extend the notion of the isotropic swim pressure to the anisotropic tensorial swim stress {{\\boldsymbol{σ }}}{{swim}}=-n\\zeta {{\\boldsymbol{D}}}{{swim}}, which is related to the anisotropic swim diffusivity {{\\boldsymbol{D}}}{{swim}}. We demonstrate this relationship with ABPs that achieve nematic orientational order via a bulk external field. The anisotropic swim stress is obtained analytically for dilute ABPs in both 2D and 3D systems. The anisotropy, defined as the ratio of the maximum to the minimum of the three principal stresses, is shown to grow exponentially with the strength of the external field. We verify that the normal component of the anisotropic swim stress applies a pressure {{{\\Pi }}}{{swim}}=-({{\\boldsymbol{σ }}}{{swim}}\\cdot {\\boldsymbol{n}})\\cdot {\\boldsymbol{n}} on a wall with normal vector {\\boldsymbol{n}}, and, through Brownian dynamics simulations, this pressure is shown to be the force per unit area transmitted by the active particles. Since ABPs have no friction with a wall, the difference between the normal and tangential stress components—the normal stress difference—generates a net flow of ABPs along the wall, which is a generic property of active matter systems.

WKB solution 4×4 for electromagnetic waves in a planar magnetically anisotropic inhomogeneous layer

Science.gov (United States)

Moiseeva, Natalya Michailovna; Moiseev, Anton Vladimirovich

2018-04-01

In the paper, an oblique incidence of a plane electromagnetic wave on a planar magnetically anisotropic inhomogeneous layer is considered. We consider the case when all the components of the magnetic permeability tensor are non zero and vary with distance from the interface of media. The WKB method gives a matrix 4 × 4 solution for the projections of the electromagnetic wave fields during its propagation. The dependence of the cross-polarized components on the orientation of the anisotropic medium relative to the plane of incidence of the medium is analyzed.

Multivariate statistical analysis of electron energy-loss spectroscopy in anisotropic materials

International Nuclear Information System (INIS)

Hu Xuerang; Sun Yuekui; Yuan Jun

2008-01-01

Recently, an expression has been developed to take into account the complex dependence of the fine structure in core-level electron energy-loss spectroscopy (EELS) in anisotropic materials on specimen orientation and spectral collection conditions [Y. Sun, J. Yuan, Phys. Rev. B 71 (2005) 125109]. One application of this expression is the development of a phenomenological theory of magic-angle electron energy-loss spectroscopy (MAEELS), which can be used to extract the isotropically averaged spectral information for materials with arbitrary anisotropy. Here we use this expression to extract not only the isotropically averaged spectral information, but also the anisotropic spectral components, without the restriction of MAEELS. The application is based on a multivariate statistical analysis of core-level EELS for anisotropic materials. To demonstrate the applicability of this approach, we have conducted a study on a set of carbon K-edge spectra of multi-wall carbon nanotube (MWCNT) acquired with energy-loss spectroscopic profiling (ELSP) technique and successfully extracted both the averaged and dichroic spectral components of the wrapped graphite-like sheets. Our result shows that this can be a practical alternative to MAEELS for the study of electronic structure of anisotropic materials, in particular for those nanostructures made of layered materials

A Goal Oriented Approach for Modeling and Analyzing Security Trade-Offs

Science.gov (United States)

Elahi, Golnaz; Yu, Eric

In designing software systems, security is typically only one design objective among many. It may compete with other objectives such as functionality, usability, and performance. Too often, security mechanisms such as firewalls, access control, or encryption are adopted without explicit recognition of competing design objectives and their origins in stakeholder interests. Recently, there is increasing acknowledgement that security is ultimately about trade-offs. One can only aim for "good enough" security, given the competing demands from many parties. In this paper, we examine how conceptual modeling can provide explicit and systematic support for analyzing security trade-offs. After considering the desirable criteria for conceptual modeling methods, we examine several existing approaches for dealing with security trade-offs. From analyzing the limitations of existing methods, we propose an extension to the i* framework for security trade-off analysis, taking advantage of its multi-agent and goal orientation. The method was applied to several case studies used to exemplify existing approaches.

The Effective Coherence Length in Anisotropic Superconductors

International Nuclear Information System (INIS)

Polturak, E.; Koren, G.; Nesher, O

1999-01-01

If electrons are transmitted from a normal conductor(N) into a superconductor(S), common wisdom has it that the electrons are converted into Cooper pairs within a coherence length from the interface. This is true in conventional superconductors with an isotropic order parameter. We have established experimentally that the situation is rather different in high Tc superconductors having an anisotropic order parameter. We used epitaxial thin film S/N bilayers having different interface orientations in order to inject carriers from S into N along different directions. The distance to which these carriers penetrate were determined through their effect on the Tc of the bilayers. We found that the effective coherence length is 20A only along the a or b directions, while in other directions we find a length of 250dr20A out of plane, and an even larger value for in-plane, off high symmetry directions. These observations can be explained using the Blonder-Tinkham-Klapwijk model adapted to anisotropic superconductivity. Several implications of our results on outstanding problems with high Tc junctions will be discussed

Some predictors of life goals in Slovenia and Croatia

Directory of Open Access Journals (Sweden)

Olga Poljšak Škraban

2008-04-01

Full Text Available Personal goals and interests play an important role in human development because they orient people's life planning, decision-making and also, therefore, their future life course. The article presents the findings of a research which explores the eventual differences between Slovenian and Croatian sample in agency-oriented and communion-oriented life goals and the analysis of significant predictors of above mentioned life goals on both samples. The research included 924 adults of both genders, aged between 21 and 70 years from Slovenia and Croatia. In the study we used the scale of Goals (Pohlman and Brunstein, 1997 and a set of questions regarding various participant's life domains and their perceived importance. The results show significant differences on agency- oriented and communion-oriented life goals between the Slovenian and Croatian sample; in both cases croatian participants reach higher results than those from slovenina sample. As significant predictors in both samples were identified (a age and importance of effective use of free time for agency-oriented goals, and (b and gender, parenthood, importance of parenthood and importance of effective use of free time for communion-oriented life goals. The differences in results are explained by respective levels of social modernisation and social welfare, given the fact the Slovenian respondents are embedded in the social environment that offers more possibilities for fullfilment of their life goals, and are closer to postmaterialism and individualism.a

Giant anisotropic magnetoresistance and planar Hall effect in the Dirac semimetal Cd3As2

Science.gov (United States)

Li, Hui; Wang, Huan-Wen; He, Hongtao; Wang, Jiannong; Shen, Shun-Qing

2018-05-01

Anisotropic magnetoresistance is the change tendency of resistance of a material on the mutual orientation of the electric current and the external magnetic field. Here, we report experimental observations in the Dirac semimetal Cd3As2 of giant anisotropic magnetoresistance and its transverse version, called the planar Hall effect. The relative anisotropic magnetoresistance is negative and up to -68% at 2 K and 10 T. The high anisotropy and the minus sign in this isotropic and nonmagnetic material are attributed to a field-dependent current along the magnetic field, which may be induced by the Berry curvature of the band structure. This observation not only reveals unusual physical phenomena in Weyl and Dirac semimetals, but also finds additional transport signatures of Weyl and Dirac fermions other than negative magnetoresistance.

Anisotropic energy-gaps of iron-based superconductivity from intra-band quasiparticle interference in LiFeAs

Energy Technology Data Exchange (ETDEWEB)

Rost, A.W. [LASSP, Department of Physics, Cornell, Ithaca, NY 14853 (United States); SUPA, School of Physics and Astronomy, Univ. of St Andrews, St Andrews, Fife KY16 9SS (United Kingdom); Allan, M.P. [LASSP, Department of Physics, Cornell, Ithaca, NY 14853 (United States); SUPA, School of Physics and Astronomy, Univ. of St Andrews, St Andrews, Fife KY16 9SS (United Kingdom); CMPMS Department, Brookhaven National Laboratory, Upton, NY 11973 (United States); Mackenzie, A.P. [SUPA, School of Physics and Astronomy, Univ. of St Andrews, St Andrews, Fife KY16 9SS (United Kingdom); Xie, Y. [CMPMS Department, Brookhaven National Laboratory, Upton, NY 11973 (United States); Davis, J.C. [LASSP, Department of Physics, Cornell, Ithaca, NY 14853 (United States); SUPA, School of Physics and Astronomy, Univ. of St Andrews, St Andrews, Fife KY16 9SS (United Kingdom); CMPMS Department, Brookhaven National Laboratory, Upton, NY 11973 (United States); Kavli Institute at Cornell for Nanoscale Science, Cornell, Ithaca, NY 14853 (United States); Kihou, K.; Lee, C.H.; Iyo, A.; Eisaki, H. [AIST, Tsukuba, Ibaraki 305-8568 (Japan); Chuang, T.M. [LASSP, Department of Physics, Cornell, Ithaca, NY 14853 (United States); CMPMS Department, Brookhaven National Laboratory, Upton, NY 11973 (United States); Inst. of Physics, Academica Sinica, Nankang, Taipei 11529, Taiwan (China)

2012-07-01

Cooper pairing in the Fe-based superconductors is thought to occur due to the projection of the antiferromagnetic interactions between iron atoms onto the complex momentum-space electronic structure. A key consequence is that distinct anisotropic energy gaps {Delta}{sub i}(k) with specific relative orientations should occur on the different electronic bands i. To determine this previously unresolved gap structure high-precision spectroscopy is required. Here we introduce the STM technique of intra-band Bogolyubov quasiparticle scattering interference (QPI) to iron-based superconductor studies, focusing on LiFeAs. We identify the QPI signatures of three hole-like dispersions and, by introducing a new QPI technique, determine the magnitude and relative orientations of corresponding anisotropic {Delta}{sub i}(k). Intra-band Bogolyubov QPI therefore yields the spectroscopic information required to identify the mechanism of superconductivity in Fe-based superconductors.

Stability and Change in Social Goals as Related to Goal Structures and Engagement in School

Science.gov (United States)

Madjar, Nir

2017-01-01

The current studies explored (a) the extended external validity of social-goal-orientation framework; (b) the mediating role of social goals between classroom goal structures and students' engagement; and (c) whether changes in social goals can be explained by classroom goal structures and engagement. Study 1 was cross-sectional (N = 317), and…

The Relationship between Self-Determination, Achievement Goal Orientation and Satisfaction with the Learning Experience: Working with Adult Lifelong Learners

Science.gov (United States)

Rodd, Jane

2013-01-01

This exploratory study investigated how self-perceptions of self-determination and of achievement goal orientation were related to self-perceptions of satisfaction with the learning experience in a population of 495 adults engaged in non-formal lifelong learning through participation as amateur members of the United States Dressage Association.…

Stoner–Wohlfarth model for the anisotropic case

Energy Technology Data Exchange (ETDEWEB)

Campos, Marcos F. de, E-mail: mcampos@metal.eeimvr.uff.br [Programa de Pós-graduação em Engenharia Metalúrgica-PUVR, Universidade Federal Fluminense, Av dos Trabalhadores 420,27255-125 Volta Redonda, Rio de Janeiro (Brazil); Sampaio da Silva, Fernanda A. [Programa de Pós-graduação em Engenharia Metalúrgica-PUVR, Universidade Federal Fluminense, Av dos Trabalhadores 420,27255-125 Volta Redonda, Rio de Janeiro (Brazil); Perigo, Elio A. [Laboratory for the Physics of Advanced Materials, University of Luxembourg, L1511 Luxembourg (Luxembourg); Castro, José A. de [Programa de Pós-graduação em Engenharia Metalúrgica-PUVR, Universidade Federal Fluminense, Av dos Trabalhadores 420,27255-125 Volta Redonda, Rio de Janeiro (Brazil)

2013-11-15

The Stoner–Wohlfarth (SW) model was calculated for the anisotropic case, by assuming crystallographical texture distributions as Gaussian, Lorentzian and Cos{sup n} (alpha). All these distributions were tested and both Gaussian and Cos{sup n} (alpha) give similar results for M{sub r}/M{sub s} above 0.8. However, the use of Cos{sup n} (alpha) makes it easier to find analytical expressions representing texture. The Lorentzian distribution is a suitable choice for not well aligned magnets, or magnets with a high fraction of misaligned grains. It is discussed how to obtain the alignment degree M{sub r}/M{sub s} directly from two measurements of magnetic remanence at the transverse and parallel directions to the alignment direction of the magnet. It is demonstrated that even the well aligned magnets with M{sub r}/M{sub s}=0.96 present coercive field of 60–70% of the anisotropy field, depending on the chosen distribution. The anisotropic SW model was used for discussing hysteresis squareness. Improving the crystalographical texture, the loop squareness also increases. - Highlights: • The Stoner–Wohlfarth model was calculated for the anisotropic case. • Different distribution functions for texture description were compared and discussed. • Lorentzian distribution is adequate for not well oriented magnets. • Determination of the alignment ratio M{sub r}/M{sub s} from 2 remanence measurements. • Prediction of the coercive field in Stoner–Wohlfarth aligned magnets.

Relationship between motivational goal orientations, perceptions of general education classroom learning environment, and deep approaches to learning

OpenAIRE

Chanut Poondej; Thanita Lerdpornkulrat

2016-01-01

Researchers have reported empirical evidence that the deep approaches to learning account for significant successful learning. The present study aimed to investigate the relationship between students' motivational goal orientation, their perceptions of the general education classroom learning environment, and deep approaches to learning strategies. Participants (N = 494) were first- and second-year college students enrolled in any of the general education courses in higher education in Thaila...

Analysis of mathematical literacy ability based on goal orientation in model eliciting activities learning with murder strategy

Science.gov (United States)

Wijayanti, R.; Waluya, S. B.; Masrukan

2018-03-01

The purpose of this research are (1) to analyze the learning quality of MEAs with MURDER strategy, (2) to analyze students’ mathematical literacy ability based on goal orientation in MEAs learning with MURDER strategy. This research is a mixed method research of concurrent embedded type where qualitative method as the primary method. The data were obtained using the methods of scale, observation, test and interviews. The results showed that (1) MEAs Learning with MURDER strategy on students' mathematical literacy ability is qualified, (2) Students who have mastery goal characteristics are able to master the seven components of mathematical literacy process although there are still two components that the solution is less than the maximum. Students who have performance goal characteristics have not mastered the components of mathematical literacy process with the maximum, they are only able to master the ability of using mathematics tool and the other components of mathematical literacy process is quite good.

Anisotropic response of the moving vortex lattice in superconducting Mo{sub (1-x)}Ge{sub x} amorphous films

Energy Technology Data Exchange (ETDEWEB)

Dolz, M.I., E-mail: mdolz@unsl.edu.ar [Centro Atomico Bariloche, CONICET, San Carlos de Bariloche, R8402AGP Rio Negro (Argentina); Shalom, D.E.; Pastoriza, H. [Centro Atomico Bariloche, CONICET, San Carlos de Bariloche, R8402AGP Rio Negro (Argentina); Lopez, D.O. [Center for Nanoscale Materials, Argonne National Laboratory, 9700 South Cass Av., Argonne, IL 60439 (United States)

2012-03-15

We have performed magnetic susceptibility measurements in Mo{sub 1-x}Ge{sub x} amorphous thin films biased with an electrical current using anisotropic coils. We tested the symmetry of the vortex response changing the relative orientation between the bias current and the susceptibility coils. We found a region in the DC current-temperature phase diagram where the dynamical vortex structures behave anisotropically. In this region the shielding capability of the superconducting currents measured by the susceptibility coils is less effective along the direction of vortex motion compared to the transverse direction. This anisotropic response is found in the same region where the peak effect in the critical current is developed. On rising temperature the isotropic behavior is recovered.

Fully nonlinear and exact perturbations of the Friedmann world model: non-flat background

Energy Technology Data Exchange (ETDEWEB)

Noh, Hyerim, E-mail: hr@kasi.ac.kr [Korea Astronomy and Space Science Institute, Daejeon, 305-348 (Korea, Republic of)

2014-07-01

We extend the fully non-linear and exact cosmological perturbation equations in a Friedmann background universe to include the background curvature. The perturbation equations are presented in a gauge ready form, so any temporal gauge condition can be adopted freely depending on the problem to be solved. We consider the scalar, and vector perturbations without anisotropic stress. As an application, we analyze the equations in the special case of irrotational zero-pressure fluid in the comoving gauge condition. We also present the fully nonlinear formulation for a minimally coupled scalar field.

Melting of anisotropic colloidal crystals in two dimensions

International Nuclear Information System (INIS)

Eisenmann, C; Keim, P; Gasser, U; Maret, G

2004-01-01

The crystal structure and melting transition of two-dimensional colloids interacting via an anisotropic magnetic dipole-dipole potential are studied. Anisotropy is achieved by tilting the external magnetic field inducing the dipole moments of the colloidal particles away from the direction perpendicular to the particle plane. We find a centred rectangular lattice and a two-step melting similar to the phase transitions of the corresponding isotropic crystals via a quasi-hexatic phase. The latter is broadened compared to the hexatic phase for isotropic interaction potential due to strengthening of orientational order

Melting of anisotropic colloidal crystals in two dimensions

Science.gov (United States)

Eisenmann, C.; Keim, P.; Gasser, U.; Maret, G.

2004-09-01

The crystal structure and melting transition of two-dimensional colloids interacting via an anisotropic magnetic dipole-dipole potential are studied. Anisotropy is achieved by tilting the external magnetic field inducing the dipole moments of the colloidal particles away from the direction perpendicular to the particle plane. We find a centred rectangular lattice and a two-step melting similar to the phase transitions of the corresponding isotropic crystals via a quasi-hexatic phase. The latter is broadened compared to the hexatic phase for isotropic interaction potential due to strengthening of orientational order.

The Reciprocal Relations between Self-Concept, Motivation and Achievement: Juxtaposing Academic Self-Concept and Achievement Goal Orientations for Mathematics Success

Science.gov (United States)

Seaton, Marjorie; Parker, Philip; Marsh, Herbert W.; Craven, Rhonda G.; Yeung, Alexander Seeshing

2014-01-01

Research suggests that motivated students and those with high academic self-concepts perform better academically. Although substantial evidence supports a reciprocal relation between academic self-concept and achievement, there is less evidence supporting a similar relation between achievement goal orientations and achievement. There is also a…

Exploring the motivations and emotions underlying rewarding self-gift giving and how they encourage achievement oriented goals.

OpenAIRE

Karayiannis, Georgios

2015-01-01

The purpose of this study is to explore consumers’ descriptions of rewarding self-gift behaviour during the entire consumption process, including the motivations and emotions involved and how these encourage towards the achievement of personal oriented goals. The study specifically focuses on luxury self-gifts and attempts to incorporate desires and the cycle of desire with self-gift giving. In doing so, the study adopts an interpretive approach, consistent with the author’s philosophical ass...

Constructing anisotropic single-Dirac-cones in Bi(1-x)Sb(x) thin films.

Science.gov (United States)

Tang, Shuang; Dresselhaus, Mildred S

2012-04-11

The electronic band structures of Bi(1-x)Sb(x) thin films can be varied as a function of temperature, pressure, stoichiometry, film thickness, and growth orientation. We here show how different anisotropic single-Dirac-cones can be constructed in a Bi(1-x)Sb(x) thin film for different applications or research purposes. For predicting anisotropic single-Dirac-cones, we have developed an iterative-two-dimensional-two-band model to get a consistent inverse-effective-mass-tensor and band gap, which can be used in a general two-dimensional system that has a nonparabolic dispersion relation as in the Bi(1-x)Sb(x) thin film system. © 2012 American Chemical Society

Anisotropic gravitational instability

International Nuclear Information System (INIS)

Polyachenko, V.L.; Fridman, A.M.

1988-01-01

Exact solutions of stability problems are obtained for two anisotropic gravitational systems of different geometries - a layer of finite thickness at rest and a rotating cylinder of finite radius. It is shown that the anisotropic gravitational instability which develops in both cases is of Jeans type. However, in contrast to the classical aperiodic Jeans instability, this instability is oscillatory. The physics of the anisotropic gravitational instability is investigated. It is shown that in a gravitating layer this instability is due, in particular, to excitation of previously unknown interchange-Jeans modes. In the cylinder, the oscillatory Jeans instability is associated with excitation of a rotational branch, this also being responsible for the beam gravitational instability. This is the reason why this instability and the anisotropic gravitational instability have so much in common

The development of a patient-specific method for physiotherapy goal setting: a user-centered design.

Science.gov (United States)

Stevens, Anita; Köke, Albère; van der Weijden, Trudy; Beurskens, Anna

2018-08-01

To deliver client-centered care, physiotherapists need to identify the patients' individual treatment goals. However, practical tools for involving patients in goal setting are lacking. The purpose of this study was to improve the frequently used Patient-Specific Complaints instrument in Dutch physiotherapy, and to develop it into a feasible method to improve physiotherapy goal setting. An iterative user-centered design was conducted in co-creation with the physiotherapists and patients, in three phases. Their needs and preferences were identified by means of group meetings and questionnaires. The new method was tested in several field tests in physiotherapy practices. Four main objectives for improvement were formulated: clear instructions for the administration procedure, targeted use across the physiotherapy process, client-activating communication skills, and a client-centered attitude of the physiotherapist. A theoretical goal-setting framework and elements of shared decision making were integrated into the new-called, Patient-Specific Goal-setting method, together with a practical training course. The user-centered approach resulted in a goal-setting method that is fully integrated in the physiotherapy process. The new goal-setting method contributes to a more structured approach to goal setting and enables patient participation and goal-oriented physiotherapy. Before large-scale implementation, its feasibility in physiotherapy practice needs to be investigated. Implications for rehabilitation Involving patients and physiotherapists in the development and testing of a goal-setting method, increases the likelihood of its feasibility in practice. The integration of a goal-setting method into the physiotherapy process offers the opportunity to focus more fully on the patient's goals. Patients should be informed about the aim of every step of the goal-setting process in order to increase their awareness and involvement. Training physiotherapists to use a patient

Does Big-Fish-Little-Pond Effect Always Exist? Investigation of Goal Orientations as Moderators in the Hong Kong Context

Science.gov (United States)

Cheng, Rebecca Wing-yi; McInerney, Dennis M.; Mok, Magdalena Mo Ching

2014-01-01

The big-fish-little-pond effect (BFLPE) posits that students with the same ability will have higher academic self-concepts when they are in low-ability classes than in high-ability classes. Our research puts the BFLPE under scrutiny by examining goal orientations as the moderators that may affect the size of the BFLPE. We collected data on…

Anisotropic constant-roll inflation

Energy Technology Data Exchange (ETDEWEB)

Ito, Asuka; Soda, Jiro [Kobe University, Department of Physics, Kobe (Japan)

2018-01-15

We study constant-roll inflation in the presence of a gauge field coupled to an inflaton. By imposing the constant anisotropy condition, we find new exact anisotropic constant-roll inflationary solutions which include anisotropic power-law inflation as a special case. We also numerically show that the new anisotropic solutions are attractors in the phase space. (orig.)

Mode I crack analysis in single crystals with anisotropic discrete dislocation plasticity : I. Formulation and crack growth

NARCIS (Netherlands)

Shishvan, Siamak Soleymani; Van der Giessen, Erik

Analyses of monotonic loading of a plane-strain mode I crack in an fcc single crystal under small-scale yielding are carried out using discrete dislocation plasticity (DDP) incorporating anisotropic elasticity. Two crystallographically symmetric crack orientations are considered where plane-strain

Effect of Fiber Orientation on Mechanical Properties of Kenaf-Reinforced Polymer Composite

Directory of Open Access Journals (Sweden)

Ching Kuan Yong

2015-03-01

Full Text Available The increase of environmental awareness has led to interest in the use of materials with eco-friendly attributes. In this study, a sandwich composite was developed from polyester and kenaf fiber with various orientation arrangements. Polyester/kenaf sandwich composite was fabricated through the combination of a hand lay-up process and cold compression. The tensile, flexural, and Izod impact tests of the sandwich composites were evaluated by using a universal tensile tester and an impact tester. The thermal stability of polyester/kenaf sandwich composite and plywood were investigated by using a thermogravimetric analyser. Results showed that the polyester/kenaf sandwich composite with kenaf fiber in anisotropy orientation achieved the highest mechanical properties. The kenaf fiber in anisotropic orientation could absorb the impact energy and allow the sandwich composite to withstand greater impact forces compared to composite with fiber in perpendicular or isotropic orientations. The polyester/kenaf sandwich composite also showed higher thermal stability compared to a conventional plywood sheet. Thus, the fabrication of polyester/kenaf sandwich composite with kenaf fiber in an anisotropic orientation design has great potential to replace plywood sheets for beam construction applications.

Electromagnetic Wave Transmittance Control using Anisotropic Plasma Lattice

Science.gov (United States)

Matlis, Eric; Corke, Thomas; Hoffman, Anthony

2017-11-01

Experiments of transmission through a lattice array of plasma columns have shown an absorption band close to the plasma frequency at 14 GHz. The beam was oriented at a 35° incident angle to the planar plasma cell. These experiments were designed to determine if the observed absorption was the result of the isotropic plasma medium or that of an anisotropic metamaterial. Transmission of the microwave energy was not consistent with an isotropic material in which absorption would monotonically increase below the plasma frequency. The experimental results are supported by an anisotropic model which was developed for the plasma permittivity using an effective medium approximation. The plasma columns were modeled as uniform rods with permittivity described by a Drude model while the components of the permittivity tensor was calculated using the Maxwell-Garnett effective medium theory. Electron densities of n = 4 x1012 cm-3 were assumed which is consistent with prior experimental measurements. This model confirms the existence of non-zero imaginary wave vector k in a narrow region centered about 14 GHz.

Anisotropic gradients in the upper mantle

International Nuclear Information System (INIS)

Garmany, J.

1981-01-01

Pn amplitudes in some widely spaced sets of orthogonal marine refraction lines on young oceanic crust are greater in the fast direction than in the slow direction. This is inconsistent with the predicted amplitude behavior for simple head waves, but can be explained by an increase in anisotropy with depth. It appears that these gradients are due to increasing olivine crystal orientation, although changes in the relative abundance of two anisotropic minerals without variable tectonization could also account for the observations. Depth variation of tectonization most probably indicates very high temperature gradients at the Moho. This would imply a substantial amount of convective heat transport in the whole oceanic crust near mid-ocean rises

Enhancing Peer Acceptance of Children with Learning Difficulties: Classroom Goal Orientation and Effects of a Storytelling Programme with Drama Techniques

Science.gov (United States)

Law, Yin-kum; Lam, Shui-fong; Law, Wilbert; Tam, Zoe W. Y.

2017-01-01

Peer acceptance is an important facilitator for the success of inclusive education. The aim of the current study is twofold: (1) to examine how classroom goal orientation is associated with children's acceptance of peers with learning difficulties; and (2) to evaluate the effectiveness of a storytelling programme with drama techniques on…

Market-phase-oriented promotion of electromobility; Phasenbezogene Foerderung von Elektromobilitaet

Energy Technology Data Exchange (ETDEWEB)

Fornahl, Dirk; Diller, Matthias [BAW Institut fuer regionale Wirtschaftsforschung GmbH, Bremen (Germany)

2010-12-15

Increasingly, the automobile industry is calling for state funds for electromobility. However, to achieve the goal of large-scale diffusion of grid-powered electric vehicles, the following points must be considered before deciding on appropriate promotion instruments: All products that are launched go through several phases before they are fully established in the market, and appropriate promotion measures are must be selected for each stage, in consideration of greatly different economic criteria. Against this background, a promotion strategy oriented along the various market phases must be developed.

Conductivity tensor of anisotropic composite media from the microstructure

International Nuclear Information System (INIS)

Torquato, S.; Sen, A.K.

1990-01-01

Perturbation expansions and rigorous bounds on the effective conductivity tensor σ e of d-dimensional anisotropic two-phase composite media of arbitrary topology have recently been shown by the authors to depend upon the set of n-point probability functions S (i) 1 ,..., S (i) n . S (i) n gives the probability of simultaneously finding n points in phase i (i=1,2). Here we describe a means of representing these statistical quantities for distributions of identical, oriented inclusions of arbitrary shape. Our results are applied by computing second-order perturbation expansions and bounds for a certain distribution of oriented cylinders with a finite aspect ratio. We examine both cases of conducting cylindrical inclusions in an insulating matrix and of insulating cracks or voids in a conducting matrix

Directional radiative properties of anisotropic rough silicon and gold surfaces

Energy Technology Data Exchange (ETDEWEB)

Lee, H.J.; Chen, Y.B.; Zhang, Z.M. [George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332 (United States)

2006-11-15

Recent studies have shown that the topography of some chemically etched microrough silicon surfaces is non-Gaussian and may be strongly anisotropic. However, the bidirectional reflectance distribution function (BRDF) of anisotropic surfaces has not been fully understood. The present study uses the Monte Carlo method to investigate the out-of-plane BRDF, multiple scattering, and the change of the polarization state upon reflection. Two ray-tracing algorithms are developed that incorporate the surface topography or slope distribution of the samples obtained by the use of an atomic force microscope. The predicted BRDFs for silicon surfaces with or without a gold coating are in reasonable agreement with the results measured using a laser scatterometer at a wavelength of 635nm. The employment of surface topographic data is indispensable to the BRDF modeling of anisotropic surfaces. While first-order scattering makes the dominant contribution to reflections from the studied surfaces, it is critical to consider the polarization state change in order to correctly predict the out-of-plane BRDF. The versatile Monte Carlo modeling tools developed through the present study help gain a better understanding of the directional radiative properties of microrough surfaces and, furthermore, will have an impact on thermal metrology in the semiconductor industry. (author)

Flaw location and characterization in anisotropic materials by ultrasonic spectral analysis

International Nuclear Information System (INIS)

Adler, L.; Cook, K.V.; Simpson, W.A.; Lewis, D.K.

1978-01-01

A method of quantitatively determining size and location of flaws in anisotropic materials such as stainless steel welds is described. In previous work, it was shown that spectral analysis of a broad band ultrasonic pulse scattered from a defect can be used to determine size and orientation in isotropic materials if the velocity of sound in the material is known. In an anisotropic structural material (stainless steel weld, centrifugal cast pipe), the velocity (both shear and longitudinal) is direction-dependent. When anisotropy is not taken into account, defect location and defect size estimation is misjudged. It will be shown that the effect of this structural variation in materials must be considered to obtain the correct size and location of defects by frequency analysis. A theoretical calculation, including anisotropy, of the scattered field from defects will also be presented

Spin-orbit interaction induced anisotropic property in interacting quantum wires

Directory of Open Access Journals (Sweden)

Chang Kai

2011-01-01

Full Text Available We investigate theoretically the ground state and transport property of electrons in interacting quantum wires (QWs oriented along different crystallographic directions in (001 and (110 planes in the presence of the Rashba spin-orbit interaction (RSOI and Dresselhaus SOI (DSOI. The electron ground state can cross over different phases, e.g., spin density wave, charge density wave, singlet superconductivity, and metamagnetism, by changing the strengths of the SOIs and the crystallographic orientation of the QW. The interplay between the SOIs and Coulomb interaction leads to the anisotropic dc transport property of QW which provides us a possible way to detect the strengths of the RSOI and DSOI. PACS numbers: 73.63.Nm, 71.10.Pm, 73.23.-b, 71.70.Ej

Motivational Climate, 2×2 Achievement Goal Orientation and Dominance, Self-Regulation, and Physical Activity in Pre-Service Teacher Education

Science.gov (United States)

Cecchini-Estrada, José-Antonio; Méndez-Giménez, Antonio

2017-01-01

This longitudinal study investigated the effects of a mastery motivational climate in physical education (PE) classes on 2×2 achievement goal orientation and dominance, self-regulated learning (SRL), and physical activity (PA) in leisure time. A total of 408 (264 women, 144 men) university students were randomly assigned to two groups:…

Anisotropic behaviour of transmission through thin superconducting NbN film in parallel magnetic field

Energy Technology Data Exchange (ETDEWEB)

Šindler, M., E-mail: sindler@fzu.cz [Institute of Physics ASCR, v. v. i., Cukrovarnická 10, CZ-162 53 Praha 6 (Czech Republic); Tesař, R. [Institute of Physics ASCR, v. v. i., Cukrovarnická 10, CZ-162 53 Praha 6 (Czech Republic); Faculty of Mathematics and Physics, Charles University, Ke Karlovu 3, CZ-121 16 Praha (Czech Republic); Koláček, J. [Institute of Physics ASCR, v. v. i., Cukrovarnická 10, CZ-162 53 Praha 6 (Czech Republic); Skrbek, L. [Faculty of Mathematics and Physics, Charles University, Ke Karlovu 3, CZ-121 16 Praha (Czech Republic)

2017-02-15

Highlights: • Transmission through thin NbN film in parallel magnetic field exhibits strong anisotropic behaviour in the terahertz range. • Response for a polarisation parallel with the applied field is given as weighted sum of superconducting and normal state contributions. • Effective medium approach fails to describe response for linear polarisation perpendicular to the applied magnetic field. - Abstract: Transmission of terahertz waves through a thin layer of the superconductor NbN deposited on an anisotropic R-cut sapphire substrate is studied as a function of temperature in a magnetic field oriented parallel with the sample. A significant difference is found between transmitted intensities of beams linearly polarised parallel with and perpendicular to the direction of applied magnetic field.

How Does Students’ Sense of Self-Worth Influence Their Goal Orientation in Mathematics Achievement?

Directory of Open Access Journals (Sweden)

Gulseren Sekreter

2017-12-01

Full Text Available In learning mathematics, students are naturally motivated to protect their self-worth by maintaining a belief that they are competent in this area. However, there is an important question which educators have to answer: “Why do students often confuse ability with worth?” The most important reason is that in our society students are widely considered to be worthy according to their ability to achieve in the given tasks in mathematics. Irrespective the contributions of the Multiple Intelligence Theory of intelligence in education, unfortunately mathematics is still regarded as predicting students’ overall ability to learn. Educators should realize that the need in order to protect self-worth arises primarily from fear of failure. Therefore, if this fear of failure is strong, some students will not try and gradually they will produce failure- avoiding strategies to avoid certain tasks in order not to look bad or receive negative assessments from others to protect his/her self-worth. It is important to make sure that the performance goals do not promote failure-avoidance (performance-avoidance-oriented behavior, such as avoiding unfavorable judgments of capabilities and looking incompetent when the student encounters greater challenges. The main purpose of this qualitative study, therefore, is to explore students’ achievement goal motivation, their self-worth and how these motivational factors impact their learning goals in mathematics. This study hypothesizes that self- worth protection in math has also been considered from a performance-avoidance goal viewpoint.This study emphasizes that educators, who consider true self-worth as the student’s inherent value, should avoid comparing their students’ ability, capability relative to others as well as students’ academic performance and outcomes with others in class context.

Long-Term Use and Perceived Benefits of Goal-Oriented Attentional Self-Regulation Training in Chronic Brain Injury

Directory of Open Access Journals (Sweden)

Fred Loya

2017-01-01

Full Text Available Primary Objective. To investigate the long-term use and perceived benefit(s of strategies included in Goal-Oriented Attentional Self-Regulation (GOALS training (Novakovic-Agopian et al., 2011 by individuals with acquired brain injury (ABI and chronic executive dysfunction. Research Design. Longitudinal follow-up of training. Methods and Procedures. Sixteen participants with chronic ABI participated in structured telephone interviews 20 months (range 11 to 31 months following completion of GOALS training. Participants responded to questions regarding the range of strategies they continued to utilize, perceived benefit(s of strategy use, situations in which strategy use was found helpful, and functional changes attributed to training. Results. Nearly all participants (94% reported continued use of at least one trained strategy in their daily lives, with 75% of participants also reporting improved functioning resulting from training. However, there was considerable variability with respect to the specific strategies individuals found helpful as well as the perceived impact of training on overall functioning. Conclusions. GOALS training shows promising long-term benefits for individuals in the chronic phase of brain injury. Identifying individual- and injury-level factors that account for variability in continued strategy use and the perceived long-term benefits of training will help with ongoing intervention development.

The Impact of Personality, Goal Orientation and Self-Efficacy on Participation of High School Teachers in Learning Activities in the Workplace

Science.gov (United States)

van Daal, Tine; Donche, Vincent; De Maeyer, Sven

2014-01-01

This study examines the influence of personality traits, goal orientation and self-efficacy on high school teachers' participation in learning activities in the workplace (i.e. experimentation, informal interaction with colleagues, self-regulation and avoidance behaviour). A convenience sample of 95 teachers from six high schools in Flanders…

Anisotropic Friction of Wrinkled Graphene Grown by Chemical Vapor Deposition.

Science.gov (United States)

Long, Fei; Yasaei, Poya; Yao, Wentao; Salehi-Khojin, Amin; Shahbazian-Yassar, Reza

2017-06-21

Wrinkle structures are commonly seen on graphene grown by the chemical vapor deposition (CVD) method due to the different thermal expansion coefficient between graphene and its substrate. Despite the intensive investigations focusing on the electrical properties, the nanotribological properties of wrinkles and the influence of wrinkle structures on the wrinkle-free graphene remain less understood. Here, we report the observation of anisotropic nanoscale frictional characteristics depending on the orientation of wrinkles in CVD-grown graphene. Using friction force microscopy, we found that the coefficient of friction perpendicular to the wrinkle direction was ∼194% compare to that of the parallel direction. Our systematic investigation shows that the ripples and "puckering" mechanism, which dominates the friction of exfoliated graphene, plays even a more significant role in the friction of wrinkled graphene grown by CVD. The anisotropic friction of wrinkled graphene suggests a new way to tune the graphene friction property by nano/microstructure engineering such as introducing wrinkles.

Anisotropic Electron-Photon and Electron-Phonon Interactions in Black Phosphorus.

Science.gov (United States)

Ling, Xi; Huang, Shengxi; Hasdeo, Eddwi H; Liang, Liangbo; Parkin, William M; Tatsumi, Yuki; Nugraha, Ahmad R T; Puretzky, Alexander A; Das, Paul Masih; Sumpter, Bobby G; Geohegan, David B; Kong, Jing; Saito, Riichiro; Drndic, Marija; Meunier, Vincent; Dresselhaus, Mildred S

2016-04-13

Orthorhombic black phosphorus (BP) and other layered materials, such as gallium telluride (GaTe) and tin selenide (SnSe), stand out among two-dimensional (2D) materials owing to their anisotropic in-plane structure. This anisotropy adds a new dimension to the properties of 2D materials and stimulates the development of angle-resolved photonics and electronics. However, understanding the effect of anisotropy has remained unsatisfactory to date, as shown by a number of inconsistencies in the recent literature. We use angle-resolved absorption and Raman spectroscopies to investigate the role of anisotropy on the electron-photon and electron-phonon interactions in BP. We highlight, both experimentally and theoretically, a nontrivial dependence between anisotropy and flake thickness and photon and phonon energies. We show that once understood, the anisotropic optical absorption appears to be a reliable and simple way to identify the crystalline orientation of BP, which cannot be determined from Raman spectroscopy without the explicit consideration of excitation wavelength and flake thickness, as commonly used previously.

Transmission of terahertz radiation by anisotropic MWCNT/polystyrene composite films

Energy Technology Data Exchange (ETDEWEB)

Okotrub, A.V.; Bulusheva, L.G. [Nikolaev Institute of Inorganic Chemistry, SB RAS, 3 Acad. Lavrentiev Ave., 630090 Novosibirsk (Russian Federation); Novosibirsk State Technical University, 20 Karl Marx Ave., 630092 Novosibirsk (Russian Federation); Kubarev, V.V. [Budker Institute of Nuclear Physics, SB RAS, 11 Acad. Lavrentiev Ave., 630090 Novosibirsk (Russian Federation); Novosibirsk State University, 2 Pirogova st., 630090 Novosibirsk (Russian Federation); Kanygin, M.A.; Sedelnikova, O.V. [Nikolaev Institute of Inorganic Chemistry, SB RAS, 3 Acad. Lavrentiev Ave., 630090 Novosibirsk (Russian Federation)

2011-11-15

Anisotropic composite materials have been prepared by repeated forge rolling of polystyrene and carbon nanotubes (CNTs) with length of {proportional_to}65 {mu}m. Transmission spectra of the composites were recorded for two different polarizations of the electric field. Obtained data indicated that the forge rolling resulted in a predominant orientation of CNTs in polymer matrix. Anisotropic response of the composites was measured at 130 {mu}m wavelength on the Novosibirsk terahertz free electron laser and angular dependence of the transmitted light was determined. Absorption spectrum showed no strong resonance features and it was interpreted by CNTs breaking and agglomeration of CNT fragments during the composite fabrication procedure. Based on classical theory of scattering, considered the scatters as electromagnetic antennas, the size distribution of CNTs in composites was found. Anisotropy of terahertz radiation transmitted from MWCNT/polystyrene composite film on the Novosibirsk free electron laser at 130 {mu}m wavelength. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Motivation and performance within a collaborative computer-based modeling task: Relations between student's achievement goal orientation, self-efficiacy, cognitive processing and achievement.

NARCIS (Netherlands)

Sins, Patrick H.M.; van Joolingen, Wouter; Savelsbergh, Elwin R.; van Hout-Wolters, Bernadette

2008-01-01

Purpose of the present study was to test a conceptual model of relations among achievement goal orientation, self-efficacy, cognitive processing, and achievement of students working within a particular collaborative task context. The task involved a collaborative computer-based modeling task. In

Motivation and performance within a collaborative computer-based modeling task: Relations between students' achievement goal orientation, self-efficacy, cognitive processing and achievement

NARCIS (Netherlands)

Sins, P.H.M.; van Joolingen, W.R.; Savelsbergh, E.R.; van Hout-Wolters, B.H.A.M.

2008-01-01

Purpose of the present study was to test a conceptual model of relations among achievement goal orientation, self-efficacy, cognitive processing, and achievement of students working within a particular collaborative task context. The task involved a collaborative computer-based modeling task. In

A Verification Logic for GOAL Agents

Science.gov (United States)

Hindriks, K. V.

Although there has been a growing body of literature on verification of agents programs, it has been difficult to design a verification logic for agent programs that fully characterizes such programs and to connect agent programs to agent theory. The challenge is to define an agent programming language that defines a computational framework but also allows for a logical characterization useful for verification. The agent programming language GOAL has been originally designed to connect agent programming to agent theory and we present additional results here that GOAL agents can be fully represented by a logical theory. GOAL agents can thus be said to execute the corresponding logical theory.

Non-interferometric determination of optical anisotropy in highly-oriented fibres using transport intensity equation technique

Science.gov (United States)

Sokkar, T. Z. N.; El-Farahaty, K. A.; El-Bakary, M. A.; Raslan, M. I.; Omar, E. Z.; Hamza, A. A.

2018-03-01

The optical setup of the transport intensity equation (TIE) technique is developed to be valid for measuring the optical properties of the highly-oriented anisotropic fibres. This development is based on the microstructure models of the highly-oriented anisotropic fibres and the principle of anisotropy. We provide the setup of TIE technique with polarizer which is controlled via stepper motor. This developed technique is used to investigate the refractive indices in the parallel and perpendicular polarization directions of light for the highly-oriented poly (ethylene terephthalate) (PET) fibres and hence its birefringence. The obtained results through the developed TIE technique for PET fibre are compared with that determined experimentally using the Mach-Zehnder interferometer under the same conditions. The comparison shows a good agreement between the obtained results from the developed technique and that obtained from the Mach-Zehnder interferometer technique.

Optical orientation and alignment of excitons in ensembles of inorganic perovskite nanocrystals

OpenAIRE

Nestoklon, M. O.; Goupalov, S. V.; Dzhioev, R. I.; Ken, O. S.; Korenev, V. L.; Kusrayev, Yu. G.; Sapega, V. F.; de Weerd, C.; Gomez, L.; Gregorkiewicz, T.; Lin, Junhao; Suenaga, Kazutomo; Fujiwara, Yasufumi; Matyushkin, L. B.; Yassievich, I. N.

2018-01-01

We demonstrate the optical orientation and alignment of excitons in a two-dimensional layer of CsPbI$_3$ perovskite nanocrystals prepared by colloidal synthesis and measure the anisotropic exchange splitting of exciton levels in the nanocrystals. From the experimental data at low temperature (2K), we obtain the average value of anisotropic splitting of bright exciton states of the order of 120{\\mu}eV. Our calculations demonstrate that there is a significant contribution to the splitting due t...

A goal-oriented field measurement filtering technique for the identification of material model parameters

KAUST Repository

Lubineau, Gilles

2009-05-16

The post-processing of experiments with nonuniform fields is still a challenge: the information is often much richer, but its interpretation for identification purposes is not straightforward. However, this is a very promising field of development because it would pave the way for the robust identification of multiple material parameters using only a small number of experiments. This paper presents a goal-oriented filtering technique in which data are combined into new output fields which are strongly correlated with specific quantities of interest (the material parameters to be identified). Thus, this combination, which is nonuniform in space, constitutes a filter of the experimental outputs, whose relevance is quantified by a quality function based on global variance analysis. Then, this filter is optimized using genetic algorithms. © 2009 Springer-Verlag.

Anisotropic contrast optical microscope.

Science.gov (United States)

Peev, D; Hofmann, T; Kananizadeh, N; Beeram, S; Rodriguez, E; Wimer, S; Rodenhausen, K B; Herzinger, C M; Kasputis, T; Pfaunmiller, E; Nguyen, A; Korlacki, R; Pannier, A; Li, Y; Schubert, E; Hage, D; Schubert, M

2016-11-01

An optical microscope is described that reveals contrast in the Mueller matrix images of a thin, transparent, or semi-transparent specimen located within an anisotropic object plane (anisotropic filter). The specimen changes the anisotropy of the filter and thereby produces contrast within the Mueller matrix images. Here we use an anisotropic filter composed of a semi-transparent, nanostructured thin film with sub-wavelength thickness placed within the object plane. The sample is illuminated as in common optical microscopy but the light is modulated in its polarization using combinations of linear polarizers and phase plate (compensator) to control and analyze the state of polarization. Direct generalized ellipsometry data analysis approaches permit extraction of fundamental Mueller matrix object plane images dispensing with the need of Fourier expansion methods. Generalized ellipsometry model approaches are used for quantitative image analyses. These images are obtained from sets of multiple images obtained under various polarizer, analyzer, and compensator settings. Up to 16 independent Mueller matrix images can be obtained, while our current setup is limited to 11 images normalized by the unpolarized intensity. We demonstrate the anisotropic contrast optical microscope by measuring lithographically defined micro-patterned anisotropic filters, and we quantify the adsorption of an organic self-assembled monolayer film onto the anisotropic filter. Comparison with an isotropic glass slide demonstrates the image enhancement obtained by our method over microscopy without the use of an anisotropic filter. In our current instrument, we estimate the limit of detection for organic volumetric mass within the object plane of ≈49 fg within ≈7 × 7 μm 2 object surface area. Compared to a quartz crystal microbalance with dissipation instrumentation, where contemporary limits require a total load of ≈500 pg for detection, the instrumentation demonstrated here improves

Simple types of anisotropic inflation

International Nuclear Information System (INIS)

Barrow, John D.; Hervik, Sigbjoern

2010-01-01

We display some simple cosmological solutions of gravity theories with quadratic Ricci curvature terms added to the Einstein-Hilbert Lagrangian which exhibit anisotropic inflation. The Hubble expansion rates are constant and unequal in three orthogonal directions. We describe the evolution of the simplest of these homogeneous and anisotropic cosmological models from its natural initial state and evaluate the deviations they will create from statistical isotropy in the fluctuations produced during a period of anisotropic inflation. The anisotropic inflation is not a late-time attractor in these models but the rate of approach to a final isotropic de Sitter state is slow and is conducive to the creation of observable anisotropic statistical effects in the microwave background. The statistical anisotropy would not be scale invariant and the level of statistical anisotropy will grow with scale.

Causal relationships of sport and exercise involvement with goal orientations, perceived competence and intrinsic motivation in physical education: a longitudinal study.

Science.gov (United States)

Papaioannou, Athanasios; Bebetsos, Evaggelos; Theodorakis, Yannis; Christodoulidis, Triantafyllos; Kouli, Olga

2006-04-01

Little information exists about the causal relationships of sport and exercise participation with goal orientations, perceived athletic competence and intrinsic motivation in physical education. A longitudinal study was conducted involving 882 Greek students who completed questionnaires on three occasions: 3 - 5 weeks into the academic year, 3 - 6 weeks before the end of the academic year, and 7 months later. The data were analysed using structural equation models, controlling for age. Task orientation and intrinsic motivation in physical education at the beginning of the academic year predicted sport and exercise participation 7 and 14 months later. Perceived athletic competence both at the beginning and end of the academic year predicted sport and exercise participation 7 and 14 months later, while ego orientation did not predict sport and exercise involvement at either time. Previous sport and exercise participation had positive effects on task orientation and perceived athletic competence 3 - 6 weeks before the end of the academic year and predicted all cognitive-affective constructs 7 months later. These results imply that the cultivation of task orientation, intrinsic motivation in physical education and perceived athletic competence will help to promote sport and exercise participation in adolescence.

Joint eigenvector estimation from mutually anisotropic tensors improves susceptibility tensor imaging of the brain, kidney, and heart.

Science.gov (United States)

Dibb, Russell; Liu, Chunlei

2017-06-01

To develop a susceptibility-based MRI technique for probing microstructure and fiber architecture of magnetically anisotropic tissues-such as central nervous system white matter, renal tubules, and myocardial fibers-in three dimensions using susceptibility tensor imaging (STI) tools. STI can probe tissue microstructure, but is limited by reconstruction artifacts because of absent phase information outside the tissue and noise. STI accuracy may be improved by estimating a joint eigenvector from mutually anisotropic susceptibility and relaxation tensors. Gradient-recalled echo image data were simulated using a numerical phantom and acquired from the ex vivo mouse brain, kidney, and heart. Susceptibility tensor data were reconstructed using STI, regularized STI, and the proposed algorithm of mutually anisotropic and joint eigenvector STI (MAJESTI). Fiber map and tractography results from each technique were compared with diffusion tensor data. MAJESTI reduced the estimated susceptibility tensor orientation error by 30% in the phantom, 36% in brain white matter, 40% in the inner medulla of the kidney, and 45% in myocardium. This improved the continuity and consistency of susceptibility-based fiber tractography in each tissue. MAJESTI estimation of the susceptibility tensors yields lower orientation errors for susceptibility-based fiber mapping and tractography in the intact brain, kidney, and heart. Magn Reson Med 77:2331-2346, 2017. © 2016 International Society for Magnetic Resonance in Medicine. © 2016 International Society for Magnetic Resonance in Medicine.

A Goal Orientation Analysis of Teachers' Motivations to Participate in the School Self-Assessment Processes of a Quality Assurance System in Chile

Science.gov (United States)

Montecinos, Carmen; Madrid, Romina; Fernández, María Beatriz; Ahumada, Luis

2014-01-01

The current study examined the goal orientations that could be inferred from how teachers from six municipal schools in Chile described their understandings, emotions, and behaviors during their participation in the assessment phase of the School Management Quality Assurance System. Content analysis of focus group interview transcripts evidenced…

Superluminal and negative delay times in isotropic-anisotropic one-dimensional photonic crystal

Science.gov (United States)

Ouchani, N.; El Moussaouy, A.; Aynaou, H.; El Hassouani, Y.; El Boudouti, E. H.; Djafari-Rouhani, B.

2017-11-01

In this work, we investigate the possibility of superluminal and negative delay times for electromagnetic wave propagation in a linear and passive periodic structure consisting of alternating isotropic and anisotropic media. This phenomenon is due to the birefringence of the anisotropic layers of the structure. By adjusting the orientations of these layers, the delay times of transmitted waves can be controlled from subluminality to superluminality and vice versa. Numerical results indicate that the apparent superluminal propagation of light occurs inside the photonic band-gaps when the principal axes of the anisotropic layers are parallel or perpendicular to the fixed axes. For other orientations of these layers, tunneling and superluminal regimes appear inside the photonic bandgaps and in the allowed bands for frequencies close to the transmission minima. The effect of the number of unit cells of the photonic crystal structure on the propagation of light with superluminal and negative delay times is also investigated. We show that the structure exhibits the Hartman effect in which the tunneling delay time of the electromagnetic wave through the photonic band-gap of the structure converges asymptotically to a finite value with increasing the number of layers. The Green's function approach has been used to derive the transmission and reflection coefficients, the density of states, and the delay times of electromagnetic waves propagating through the structure. The control of the magnitude and the sign of the delay time of light propagation represent a key point in slow and fast light technologies. The proposed structure in this study represents a new system for controlling the delay times of wave propagation without a need of active or non-linear media as well as lossy or asymmetric periodic structures.

Conflicts in Everyday Life: The Influence of Competing Goals on Domestic Energy Conservation

Directory of Open Access Journals (Sweden)

Anneli Selvefors

2015-05-01

Full Text Available A common approach for understanding people’s domestic energy behavior is to study the influence of deterministic factors, such as attitudes, norms and knowledge, on behavior. However, few studies have succeeded in fully explaining people’s behavior based on these factors alone. To further the understanding of people’s everyday energy use, a goal-oriented approach based on activity theory has been applied to discuss energy conservation from a multiple goal perspective based on the findings from an interview study with 42 informants. The findings show that the informants used energy to fulfill goals linked to basic needs or desires related to their well-being. Even though the majority of informants had an explicit goal to reduce their energy consumption, many experienced conflicts with other competing goals, which often made energy conservation undesirable or challenging. The findings suggest that actions to reduce energy use will most often not be prioritized if they cannot be integrated into people’s daily life without jeopardizing their possibilities to achieve their primary goals and satisfy their everyday needs. It is thus vital to consider people’s everyday life and the many conflicts they experience when aiming to understand why people do, or do not, prioritize energy conservation during everyday activities.

Molecular orientation and electronic structure at organic heterojunction interfaces

Energy Technology Data Exchange (ETDEWEB)

Zhong, Shu [Department of Chemistry, National University of Singapore, 3 Science Drive 3, 117543 Singapore (Singapore); Zhong, Jian Qiang; Wee, Andrew T.S. [Department of Physics, National University of Singapore, 2 Science Drive 3, 117542 Singapore (Singapore); Chen, Wei, E-mail: phycw@nus.edu.sg [Department of Chemistry, National University of Singapore, 3 Science Drive 3, 117543 Singapore (Singapore); Department of Physics, National University of Singapore, 2 Science Drive 3, 117542 Singapore (Singapore); National University of Singapore (Suzhou) Research Institute, Suzhou (China)

2015-10-01

Highlights: • Molecular orientation at the organic heterojunction interfaces. • Energy level alignments at the organic heterojunction interfaces. • Gap-states mediated interfacial energy level alignment. - Abstract: Due to the highly anisotropic nature of π-conjugated molecules, the molecular orientation in organic thin films can significantly affect light absorption, charge transport, energy level alignment (ELA) and hence device performance. Synchrotron-based near-edge X-ray absorption fine structure (NEXAFS) spectroscopy represents a powerful technique for probing molecular orientation. The aim of this review paper is to provide a balanced assessment on the investigation of molecular orientation at the organic–organic heterojunction (OOH) interface by NEXAFS, as well as the gap-states mediated orientation dependent energy level alignment at OOH interfaces. We highlight recent progress in elucidating molecular orientation at OOH interfaces dominated by various interfacial interactions, gap-states controlled orientation dependent energy level alignments at OOH interfaces, and the manipulations of molecular orientation and ELA in OOH.

The effect of parental education, prior achievement, self-efficacy, goal orientation, and effort on undergraduate science performance of Latinos and Caucasians

Science.gov (United States)

Stansbury, Sydney Lynn

Compared with majority students, underrepresented minorities have demonstrated weaker undergraduate science performance. Previous research has attributed the weaker performance to socioeconomic factors that influence poorer precollege preparation. Studies also have found that, compared with majority students, underrepresented minorities are less confident about their science skills and more interested in extrinsic rewards of science careers. Social Cognitive Theory posits that low self-efficacy coupled with high extrinsic goal orientation diminishes cognitive engagement, resulting in weak performance. Applying motivational characteristics of underrepresented minority students to a Social Cognitive Model may explain why their performance is weaker than that of Caucasians. Thus, the purpose of this study was to investigate the degree to which motivation variables account for the difference between underrepresented minority and majority students' undergraduate science performance. The study was conducted at a large, predominantly Caucasian, private university located in an urban setting in the Southwest. Two hundred twenty-two students--154 Caucasians and 68 Latinos--enrolled in a general chemistry course participated. Students were administered the Motivation for Learning Questionnaire, designed specifically for this study, consisting of scales measuring the following variables: ethnicity, level of parental education, and effort exertion; self-efficacy, effort regulation, intrinsic goal orientation, and extrinsic goal orientation, measures from the Motivated Strategies for Learning Questionnaire (Pintrich, Smith, Garcia, & McKeachie, 1991); and ability orientation, a measure from the Patterns of Adaptive Learning Survey (Midgley, Maehr, & Urdan, 1995). Financial aid information, chemistry and math placement test scores, and chemistry grades were obtained from other on-campus departments. Results demonstrated that the hypotheses were only partially confirmed by the

Pure crystal orientation and anisotropic charge transport in large-area hybrid perovskite films

KAUST Repository

Cho, Nam Chul

2016-11-10

Controlling crystal orientations and macroscopic morphology is vital to develop the electronic properties of hybrid perovskites. Here we show that a large-area, orientationally pure crystalline (OPC) methylammonium lead iodide (MAPbI3) hybrid perovskite film can be fabricated using a thermal-gradient-assisted directional crystallization method that relies on the sharp liquid-to-solid transition of MAPbI3 from ionic liquid solution. We find that the OPC films spontaneously form periodic microarrays that are distinguishable from general polycrystalline perovskite materials in terms of their crystal orientation, film morphology and electronic properties. X-ray diffraction patterns reveal that the film is strongly oriented in the (112) and (200) planes parallel to the substrate. This film is structurally confined by directional crystal growth, inducing intense anisotropy in charge transport. In addition, the low trap-state density (7.9 × 1013 cm−3) leads to strong amplified stimulated emission. This ability to control crystal orientation and morphology could be widely adopted in optoelectronic devices.

Long-range interaction of anisotropic systems

KAUST Repository

Zhang, Junyi

2015-02-01

The first-order electrostatic interaction energy between two far-apart anisotropic atoms depends not only on the distance between them but also on their relative orientation, according to Rayleigh-Schrödinger perturbation theory. Using the first-order interaction energy and the continuum model, we study the long-range interaction between a pair of parallel pristine graphene sheets at zero temperature. The asymptotic form of the obtained potential density, &epsi:(D) &prop: ?D ?3 ?O(D?4), is consistent with the random phase approximation and Lifshitz theory. Accordingly, neglectance of the anisotropy, especially the nonzero first-order interaction energy, is the reason why the widely used Lennard-Jones potential approach and dispersion corrections in density functional theory give a wrong asymptotic form ε(D) &prop: ?D?4. © EPLA, 2015.

Long-range interaction of anisotropic systems

KAUST Repository

Zhang, Junyi; Schwingenschlö gl, Udo

2015-01-01

The first-order electrostatic interaction energy between two far-apart anisotropic atoms depends not only on the distance between them but also on their relative orientation, according to Rayleigh-Schrödinger perturbation theory. Using the first-order interaction energy and the continuum model, we study the long-range interaction between a pair of parallel pristine graphene sheets at zero temperature. The asymptotic form of the obtained potential density, &epsi:(D) &prop: ?D ?3 ?O(D?4), is consistent with the random phase approximation and Lifshitz theory. Accordingly, neglectance of the anisotropy, especially the nonzero first-order interaction energy, is the reason why the widely used Lennard-Jones potential approach and dispersion corrections in density functional theory give a wrong asymptotic form ε(D) &prop: ?D?4. © EPLA, 2015.

Powder alignment system for anisotropic bonded NdFeB Halbach cylinders \\ud

OpenAIRE

Zhu, Z.Q.; Xia, Z.P.; Atallah, K.; Jewell, G.W.; Howe, D.

2000-01-01

A Halbach cylinder, fabricated from pre-magnetized sintered NdFeB magnet segments, is proposed for the powder aligning system during the compression or injection moulding of anisotropic bonded Halbach oriented NdFeB ring magnets. The influence of leading design parameters of the powder aligning system, viz. the number of magnet segments per pole, their axial length and radial thickness, and their clearance from the mould, is investigated by finite element analysis, and validated experimentally

Large area synthesis, characterization, and anisotropic etching of two dimensional tungsten disulfide films

International Nuclear Information System (INIS)

Mutlu, Zafer; Ozkan, Mihrimah; Ozkan, Cengiz S.

2016-01-01

Emergent properties of tungsten disulfide at the quantum confinement limit hold promise for electronic and optoelectronic applications. Here we report on the large area synthesis of atomically thin tungsten disulfide films with strong photoluminescence properties via sulfurization of the pre-deposited tungsten films. Detailed characterization of the pre-deposited tungsten films and tungsten disulfide films are performed using microscopy and spectroscopy methods. By directly heating tungsten disulfide films in air, we have shown that the films tend to be etched into a series of triangular shaped pits with the same orientations, revealing the anisotropic etching behavior of tungsten disulfide edges. Moreover, the dimensions of the triangular pits increase with the number of layers, suggesting a thickness dependent behavior of etching in tungsten disulfide films. This method offers a promising new avenue for engineering the edge structures of tungsten disulfide films. - Highlights: • Large-scale synthesis of WS_2 films is achieved via sulfurization of W films. • Annealing of W films leads to a substantial improvement in the quality of WS_2 films. • WS_2 films show laser power dependent photoluminescence characteristics. • WS_2 films are etched with well-oriented triangular pits upon annealing in air. • Anisotropic oxidative etching is greatly affected by the thickness of WS_2 films.

Nonpolar ZnO film growth and mechanism for anisotropic in-plane strain relaxation

International Nuclear Information System (INIS)

Pant, P.; Budai, J.D.; Narayan, J.

2010-01-01

Using high-resolution transmission electron microscopy (HRTEM) and X-ray diffraction, we investigated the strain relaxation mechanisms for nonpolar (1 1 -2 0) a-plane ZnO epitaxy on (1 -1 0 2) r-plane sapphire, where the in-plane misfit ranges from -1.5% for the [0 0 0 1]ZnO-parallel [1 -1 0 -1]sapphire to -18.3% for the [-1 1 0 0]ZnO-parallel [-1 -1 2 0]sapphire direction. For the large misfit [-1 1 0 0]ZnO direction the misfit strains are fully relaxed at the growth temperature, and only thermal misfit and defect strains, which cannot be relaxed fully by slip dislocations, remain on cooling. For the small misfit direction, lattice misfit is not fully relaxed at the growth temperature. As a result, additive unrelaxed lattice and thermal misfit and defect strains contribute to the measured strain. Our X-ray diffraction measurements of lattice parameters show that the anisotropic in-plane biaxial strain leads to a distortion of the hexagonal symmetry of the ZnO basal plane. Based on the anisotropic strain relaxation observed along the orthogonal in-plane [-1 1 0 0] and [0 0 0 1]ZnO stress directions and our HRTEM investigations of the interface, we show that the plastic relaxation occurring in the small misfit direction [0 0 0 1]ZnO by dislocation nucleation is incomplete. These results are consistent with the domain-matching paradigm of a complete strain relaxation for large misfits and a difficulty in relaxing the film strain for small misfits.

Chicken or the Egg: Longitudinal Analysis of the Causal Dilemma between Goal Orientation, Self-Regulation and Cognitive Processing Strategies in Higher Education

Science.gov (United States)

De Clercq, Mikael; Galand, Benoit; Frenay, Mariane

2013-01-01

The aim of this study was to investigate the direction of the effect between goal orientation, self-regulation and deep processing strategies in order to understand the impact of these three constructs on students' achievement. The participants were 110 freshmen from the engineering faculty at the Universite catholique de Louvain in Belgium, who…

Anisotropic toughness and strength in graphene and its atomistic origin

Science.gov (United States)

Hossain, M. Zubaer; Ahmed, Tousif; Silverman, Benjamin; Khawaja, M. Shehroz; Calderon, Justice; Rutten, Andrew; Tse, Stanley

2018-01-01

This paper presents the implication of crystallographic orientation on toughness and ideal strength in graphene under lattice symmetry-preserving and symmetry-breaking deformations. In symmetry-preserving deformation, both toughness and strength are isotropic, regardless of the chirality of the lattice; whereas, in symmetry-breaking deformation they are strongly anisotropic, even in the presence of vacancy defects. The maximum and minimum of toughness or strength occur for loading along the zigzag direction and the armchair direction, respectively. The anisotropic behavior is governed by a complex interplay among bond-stretching deformation, bond-bending deformation, and the chirality of the lattice. Nevertheless, the condition for crack-nucleation is dictated by the maximum bond-force required for bond rupture, and it is independent of the chiral angle of the lattice or loading direction. At the onset of crack-nucleation a localized nucleation zone is formed, wherein the bonds rupture locally satisfying the maximum bond-force criterion. The nucleation zone acts as the physical origin in triggering the fracture nucleation process, but its presence is undetectable from the macroscopic stress-strain data.

Conversion of optical wave polarizations in 1D finite anisotropic photonic crystal

International Nuclear Information System (INIS)

Ouchani, N.; Nougaoui, N.; Daoudi, A.; Bria, D.

2006-07-01

We show that by using one dimensional anisotropic photonic structures, it is possible to realize optical wave polarization conversion by transmission or by reflection. Thus a single incident S(P) polarized plane wave can produce a single reflected P(S) polarized wave and a single transmitted P(S) polarized wave. This polarization conversion property can be fulfilled with a simple finite superlattice constituted by anisotropic dielectric materials. We discuss the appropriate choices of the material and geometrical properties to realize such structures. The transmission and reflection coefficients are discussed in relation with the dispersion curves of the finite structure embedded between two isotropic substrates. Both transmission and reflection coefficients are calculated in the framework of Green's function method. The amplitude and the polarization characteristics of reflected and transmitted waves are determined as function of frequency ω , and wave vector k parallel ( parallel to the interface) and the orientations of the principal axes of the layers constituting the SL. Moreover, this structure exhibits a coupling between S and P waves that does not exist in SL composed only of isotropic materials. Specific applications of these results are given for a superlattice consisting of alternating biaxial anisotropic layers NaNO 2 /SbSi sandwiched between two identical semi-infinite isotropic media. (author)

Pure crystal orientation and anisotropic charge transport in large-area hybrid perovskite films

KAUST Repository

Cho, Nam Chul; Li, Feng; Turedi, Bekir; Sinatra, Lutfan; Sarmah, Smritakshi P.; Parida, Manas R.; Saidaminov, Makhsud I.; Banavoth, Murali; Burlakov, Victor M.; Goriely, Alain; Mohammed, Omar F.; Wu, Tao; Bakr, Osman

2016-01-01

Controlling crystal orientations and macroscopic morphology is vital to develop the electronic properties of hybrid perovskites. Here we show that a large-area, orientationally pure crystalline (OPC) methylammonium lead iodide (MAPbI3) hybrid

Influence of mineralogy and moisture content on plasticity and induced anisotropic damage of a clay-stone: application to nuclear waste disposals

International Nuclear Information System (INIS)

Chiarelli, A.S.; Sibai, M.; Karami, M.; Ledesert, B.; Hoteit, N.

2000-01-01

The influence of mineralogy and moisture content on mechanical behaviour of a clay-stone rock is studied by the way of uniaxial and triaxial compression tests and microscopic observations. Some parameters characteristic of phenomena like plasticity and induced anisotropic damage are discussed as a function of these two factors. Rock behaviour becomes more brittle when calcite content grows or when clay or moisture content decreases. At the micro-level, plasticity is induced by slip of clay sheets and induced anisotropic damage appears by growth of oriented microcracks at the interface between grains and matrix. (authors)

Model and system learners, optimal process constructors and kinetic theory-based goal-oriented design: A new paradigm in materials and processes informatics

Science.gov (United States)

Abisset-Chavanne, Emmanuelle; Duval, Jean Louis; Cueto, Elias; Chinesta, Francisco

2018-05-01

Traditionally, Simulation-Based Engineering Sciences (SBES) has relied on the use of static data inputs (model parameters, initial or boundary conditions, … obtained from adequate experiments) to perform simulations. A new paradigm in the field of Applied Sciences and Engineering has emerged in the last decade. Dynamic Data-Driven Application Systems [9, 10, 11, 12, 22] allow the linkage of simulation tools with measurement devices for real-time control of simulations and applications, entailing the ability to dynamically incorporate additional data into an executing application, and in reverse, the ability of an application to dynamically steer the measurement process. It is in that context that traditional "digital-twins" are giving raise to a new generation of goal-oriented data-driven application systems, also known as "hybrid-twins", embracing models based on physics and models exclusively based on data adequately collected and assimilated for filling the gap between usual model predictions and measurements. Within this framework new methodologies based on model learners, machine learning and kinetic goal-oriented design are defining a new paradigm in materials, processes and systems engineering.

When you have to climb downhill to reach the top: The effect of action versus state orientation on solving a goal-subgoal conflict in the Tower of Hanoi task

NARCIS (Netherlands)

Jostmann, N.B.; Gieselmann, A.

2014-01-01

Complex problems often include a response conflict between a subgoal and a final goal. The present experiment investigated the roles of situational demands and individual differences in self-regulation on solving goal-subgoal conflicts in a computerized Tower of Hanoi task. Action-oriented versus

Intact reflexive but deficient voluntary social orienting in autism spectrum disorder

Directory of Open Access Journals (Sweden)

Megan Anne Kirchgessner

2015-12-01

Full Text Available Impairment in social interactions is a primary characteristic of people diagnosed with autism spectrum disorder (ASD. Although these individuals tend to orient less to naturalistic social cues than do typically developing (TD individuals, laboratory experiments testing social orienting in ASD have been inconclusive, possibly because of a failure to fully isolate reflexive (stimulus-driven and voluntary (goal-directed social orienting processes. The purpose of the present study was to separately examine potential reflexive and/or voluntary social orienting differences in individuals with ASD relative to TD controls. Subjects (ages 7-14 with high-functioning ASD and a matched control group completed three gaze cueing tasks on an iPad in which individuals briefly saw a face with averted gaze followed by a target after a variable delay. Two tasks were 100% predictive with either all congruent (target appears in gaze direction or all incongruent (target appears opposite from gaze direction trials, respectively. Another task was non-predictive with these same trials (half congruent and half incongruent intermixed randomly. Response times (RTs to the target were used to calculate reflexive (incongruent condition RT – congruent condition RT and voluntary (non-predictive condition RT – predictive condition RT gaze cueing effects. Subjects also completed two additional non-social orienting tasks (ProPoint and AntiPoint. Subjects with ASD demonstrate intact reflexive but deficient voluntary gaze following. Similar results were found in a separate test of non-social orienting. This suggests problems with using social cues, but only in a goal-directed fashion, in our sample of high-functioning individuals with ASD. Such findings may not only explain inconclusive previous findings but more importantly be critical for understanding social dysfunctions in ASD and for developing future interventions.

Monitoring the orientation of rare-earth-doped nanorods for flow shear tomography

NARCIS (Netherlands)

Kim, J.; Michelin, S.; Hilbers, M.; Martinelli, L.; Chaudan, E.; Amselem, G.; Fradet, E.; Boilot, J.-P.; Brouwer, A.M.; Baroud, C.N.; Peretti, J.; Gacoin, T.

Rare-earth phosphors exhibit unique luminescence polarization features originating from the anisotropic symmetry of the emitter ion's chemical environment. However, to take advantage of this peculiar property, it is necessary to control and measure the ensemble orientation of the host particles with

The relationship between anisotropic magnetoresistance and topology of Fermi surface in Td-MoTe2 crystal

Science.gov (United States)

Lv, Yang-Yang; Li, Xiao; Pang, Bin; Cao, Lin; Lin, Dajun; Zhang, Bin-Bin; Yao, Shu-Hua; Chen, Y. B.; Zhou, Jian; Dong, Song-Tao; Zhang, Shan-Tao; Lu, Ming-Hui; Chen, Yan-Feng

2017-07-01

Layered transition-metal dichalcogenides have been recently attracted a lot of attention because of their unique physical properties, such as extremely large and anisotropic magnetoresistance (MR) in WTe2. In this work, we observed the abnormally anisotropic MR on Td-MoTe2 crystal that is strongly dependent on the temperature, as well as the orientations of both magnetic field B and electric field E with respect to crystallographic axes of Td-MoTe2. When E//a-axis and B//c-axis, MR is parabolically dependent on B and is as high as 520% under 9 T and 2 K conditions; the MR is quasi-linearly dependent on B when E//a-axis and B//b-axis (E//b-axis and B//c-axis), and the corresponding MR is only 130% (220%); MR is initially parabolically dependent on B, then linearly on B, and finally shows a saturate trend under E//B//a-axis (or E//B//b-axis) conditions, and the MR is about 16% (30%). These anisotropic MR behaviors can be qualitatively explained by the features of the Fermi surface of Td-MoTe2. This work may demonstrate the rich anisotropic physical behavior in layered transition-metal dichalcognides.

Piezo-voltage control of magnetization orientation in a ferromagnetic semiconductor

Energy Technology Data Exchange (ETDEWEB)

Althammer, M.; Brandlmaier, A.; Gepraegs, S.; Opel, M.; Gross, R. [Walther-Meissner-Institut, Bayerische Akademie der Wissenschaften, 85748 Garching (Germany); Bihler, C.; Brandt, M.S. [Walter Schottky Institut, Technische Universitaet Muenchen, 85748 Garching (Germany); Schoch, W.; Limmer, W. [Institut fuer Halbleiterphysik, Universitaet Ulm, 89069 Ulm (Germany); Goennenwein, S.T.B.

2008-06-15

The possibility to control magnetic properties via electrical fields is investigated in a piezoelectric actuator/ferromagnetic semiconductor thin film hybrid structure. Using anisotropic magnetoresistance techniques, the magnetic anisotropy and the magnetization orientation within the plane of the ferromagnetic film are measured quantitatively. The experiments reveal that the application of an electrical field to the piezoelectric actuator allows to continuously and reversibly rotate the magnetization orientation in the ferromagnet by about 70 . (copyright 2008 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Chain-like nanostructures from anisotropic self-assembly of semiconducting metal oxide nanoparticles with a block copolymer.

Science.gov (United States)

Wang, Junzheng; Winardi, Suminto; Sugawara-Narutaki, Ayae; Kumamoto, Akihito; Tohei, Tetsuya; Shimojima, Atsushi; Okubo, Tatsuya

2012-11-21

A facile method is reported for the preparation of chain-like nanostructures by anisotropic self-assembly of TiO(2) and SnO(2) nanoparticles with the aid of a block copolymer in an aqueous medium. Well-defined crystallographic orientations between neighbouring nanoparticles are observed in TiO(2) nanochains, which is important for tailoring the grain boundaries and thus enhancing charge transport.

Goal-oriented functional tree structure for nuclear power plant emergency preparedness

International Nuclear Information System (INIS)

Calabrese, R.V.; Roush, M.L.

1987-01-01

Guidelines for development and implementation of emergency response plans do not provide the planner/implementer with an adequate overview of the functions to be achieved or a measure of their relative importance. To provide a framework in which this importance can be recognized, understood and quantified, a logical goal oriented tree structure has been developed which integrates and gives a clear visual representation of the functions required to meet the emergency preparedness objective. The tree considers a spectrum of both high and low probability events which may require mitigation both onsite and offsite. The ultimate objective: to Minimize the Ill Effects of a Nuclear Power Plant Incident is satisfied by functions concerned with prevention and mitigation of human injury and property damage. A complete and detailed structure which specifies the subfunctions and success paths which satisfy these functions has been developed. Institutional activities such as planning, training, procedure development, monitoring and decision making do not enter the tree directly. Instead, the logic structure defines the extent to which these activities must be considered and the information systems and decision models required for successful implementation of the plan. The top structure of the tree is presented and a few branches are considered in detail. The impact of institutional activities, information systems, etc. is discussed. Tree quantification is considered

Extracurricular participation and the development of school attachment and learning goal orientation: the impact of school quality.

Science.gov (United States)

Fischer, Natalie; Theis, Désirée

2014-06-01

School motivation and attachment typically decline after the transition to middle school. According to the stage-environment fit approach, extracurricular activities are supposed to promote motivation. However, research has shown that the effects depend on the quality of the activities, which usually is measured by assessing students' individual perceptions. This article adds to previous studies in examining effects of school-based extracurricular participation on the development of individual motivation (learning goal orientation) and school attachment depending on the quality of the activities (i.e., amounts of challenge and social support) at the school level. We focused on the motivation development of 3,230 students at 98 schools who filled in questionnaires in Grades 5 (2005), 7 (2007), and 9 (2009). The quality of extracurricular activities was assessed on the basis of responses from 4,270 students in Grades 5, 7, and 9 at the same schools at the first measurement point (2005). Thus, individual development of the longitudinal sample was predicted by aggregated quality measures at the school level. Three-level hierarchical linear growth-curve models including school level, student level, and time were calculated. Cross-level interactions were analyzed to examine the influence of extracurricular participation on individual development as a function of school quality. Results show that the effects of extracurricular participation on the development of learning goal orientation are dependent on both features of school quality, whereas the development of school attachment in particular is influenced by activities offering social support. Thus, the effects of extracurricular activities are based not only on individual perceptions of activity features but also on school quality. PsycINFO Database Record (c) 2014 APA, all rights reserved.

Lattice models of directed and semiflexible polymers in anisotropic environment

International Nuclear Information System (INIS)

Haydukivska, K; Blavatska, V

2015-01-01

We study the conformational properties of polymers in presence of extended columnar defects of parallel orientation. Two classes of macromolecules are considered: the so-called partially directed polymers with preferred orientation along direction of the external stretching field and semiflexible polymers. We are working within the frames of lattice models: partially directed self-avoiding walks (PDSAWs) and biased self-avoiding walks (BSAWs). Our numerical analysis of PDSAWs reveals, that competition between the stretching field and anisotropy caused by presence of extended defects leads to existing of three characteristic length scales in the system. At each fixed concentration of disorder we found a transition point, where the influence of extended defects is exactly counterbalanced by the stretching field. Numerical simulations of BSAWs in anisotropic environment reveal an increase of polymer stiffness. In particular, the persistence length of semiflexible polymers increases in presence of disorder. (paper)

Validation of a Teachers' Achievement Goal Instrument for Teaching Physical Education

Science.gov (United States)

Wang, Jian; Shen, Bo; Luo, Xiaobin; Hu, Qingshan; Garn, Alex C.

2018-01-01

Purpose: Using Butler's teacher achievement goal orientation as a conceptual framework, we developed this study to validate a teachers' achievement goal instrument for teaching physical education. Methods: A sample of 322 Chinese physical education teachers participated in this study and completed measures of achievement goal orientations and job…

Analysis on the anisotropic electromechanical properties of lead magnoniobate titanate single crystal for ring type ultrasonic motors

Directory of Open Access Journals (Sweden)

Xiang Shi

2016-11-01

Full Text Available This work discussed the optimized cut of single crystal lead magnoniobate titanate (PMNT for use of ring type travelling wave ultrasonic motors (USMs, according to anisotropic analysis on electromechanical properties. The selection criterion of crystal orientation relies on the circular uniformity of the induced travelling wave amplitude on the stator surface. By calculating the equivalent elastic coefficient c11 and lateral piezoelectric constant d31, the optimal crystal orientations were proposed for PMNT single crystals poled along different directions. For single crystal poled along c directions, the optimal orientation lies along [001]c with d31=-1335pC/N and k31=0.87. The crystallographic orientation [025]c is the optimized orientation for single crystals poled along c direction with d31=199pC/N and k31=0.55. The optimal orientation of 1R configuration is [332¯]c with a large enhancement of d31 = 1201 and k31=0.92.

Can children identify and achieve goals for intervention? A randomized trial comparing two goal-setting approaches.

Science.gov (United States)

Vroland-Nordstrand, Kristina; Eliasson, Ann-Christin; Jacobsson, Helén; Johansson, Ulla; Krumlinde-Sundholm, Lena

2016-06-01

The efficacy of two different goal-setting approaches (children's self-identified goals and goals identified by parents) were compared on a goal-directed, task-oriented intervention. In this assessor-blinded parallel randomized trial, 34 children with disabilities (13 males, 21 females; mean age 9y, SD 1y 4mo) were randomized using concealed allocation to one of two 8-week, goal-directed, task-oriented intervention groups with different goal-setting approaches: (1) children's self-identified goals (n=18) using the Perceived Efficacy and Goal-Setting System, or (2) goals identified by parents (n=16) using the Canadian Occupational Performance Measure (COPM). Participants were recruited through eight paediatric rehabilitation centres and randomized between October 2011 and May 2013. The primary outcome measure was the Goal Attainment Scaling and the secondary measure, the COPM performance scale (COPM-P). Data were collected pre- and post-intervention and at the 5-month follow-up. There was no evidence of a difference in mean characteristics at baseline between groups. There was evidence of an increase in mean goal attainment (mean T score) in both groups after intervention (child-goal group: estimated mean difference [EMD] 27.84, 95% CI 22.93-32.76; parent-goal group: EMD 21.42, 95% CI 16.16-26.67). There was no evidence of a difference in the mean T scores post-intervention between the two groups (EMD 6.42, 95% CI -0.80 to 13.65). These results were sustained at the 5-month follow-up. Children's self-identified goals are achievable to the same extent as parent-identified goals and remain stable over time. Thus children can be trusted to identify their own goals for intervention, thereby influencing their involvement in their intervention programmes. © 2015 Mac Keith Press.

Orientation sensors by defocused imaging of single gold nano-bipyramids

Science.gov (United States)

Zhang, Fanwei; Li, Qiang; Rao, Wenye; Hu, Hongjin; Gao, Ye; Wu, Lijun

2018-01-01

Optical probes for nanoscale orientation sensing have attracted much attention in the field of single-molecule detections. Noble metal especially Au nanoparticles (NPs) exhibit extraordinary plasmonic properties, great photostability, excellent biocompatibility and nontoxicity, and thereby could be alternative labels to conventional applied organic dyes or quantum dots. One type of the most interesting metallic NPs is Au nanorods (AuNRs). Its anisotropic emission accompanied with anisotropic shape is potentially applicable in orientation sensing. Recently, we resolved the 3D orientation of single AuNRs within one frame by deliberately introducing an aberration (slight shift of the dipole away from the focal plane) to the imaging system1 . This defocused imaging technique is based on the electron transition dipole approximation and the fact that the dipole radiation exhibits an angular anisotropy. Since the photoluminescence quantum yield (PLQY) can be enhanced by the "lightning rod effect" (at a sharp angled surface) and localized SPR modes, that of the single Au nano-bipyramid (AuNB) with more sharp tips or edges was found to be doubled comparing to AuNRs with a same effective size2. Here, with a 532 nm excitation, we find that the PL properties of individual AuNBs can be described by three perpendicularly-arranged dipoles (with different ratios). Their PL defocused images are bright, clear and exhibit obvious anisotropy. These properties suggest that AuNBs are excellent candidates for orientation sensing labels in single molecule detections.

From User Goals to Service Discovery and Composition

NARCIS (Netherlands)

Bonino da Silva Santos, L.O.; Guizzardi, G.; Ferreira Pires, Luis; van Sinderen, Marten J.

2009-01-01

Goals are often used to represent stakeholder's objectives. The intentionality inherited by a goal drives stakeholders to pursuit the fulfillment of their goals either by themselves or by delegating this fulfillment to third parties. In Service-Oriented Computing, service client's requirements are

A morphological basis for orientation tuning in primary visual cortex.

Science.gov (United States)

Mooser, François; Bosking, William H; Fitzpatrick, David

2004-08-01

Feedforward connections are thought to be important in the generation of orientation-selective responses in visual cortex by establishing a bias in the sampling of information from regions of visual space that lie along a neuron's axis of preferred orientation. It remains unclear, however, which structural elements-dendrites or axons-are ultimately responsible for conveying this sampling bias. To explore this question, we have examined the spatial arrangement of feedforward axonal connections that link non-oriented neurons in layer 4 and orientation-selective neurons in layer 2/3 of visual cortex in the tree shrew. Target sites of labeled boutons in layer 2/3 resulting from focal injections of biocytin in layer 4 show an orientation-specific axial bias that is sufficient to confer orientation tuning to layer 2/3 neurons. We conclude that the anisotropic arrangement of axon terminals is the principal source of the orientation bias contributed by feedforward connections.

Dynamics of molecular stereochemistry via oriented molecule scattering

International Nuclear Information System (INIS)

Parker, D.H.; Jalink, H.; Stolte, S.

1987-01-01

Crossed-beam reactive scattering experiments employing electrostatic hexapole fields to control the initial collision geometry of chemical reactions are described. New results are presented on the reactions of oriented NO with ozone and oriented N 2 O with Ba. Preliminary results are also given for the oriented CH 3 F + Ca* → CaF* + CH 3 reaction. Recent technical advances in state selection and product detection are detailed. They discuss the effects of rotational coupling and nonzero impact parameters in changing the molecular precollisions orientation selected by the hexapole fields to a different in-collision orientation at the moment of impact with the reaction partner. Uncoupling of l doubling in N 2 O at strong orientation fields is demonstrated via the observed reactive anisotropy. Steric effects are found to govern many aspects of the reactions investigated thus far. Strong correlations are observed of the reactivity, product recoil, and rotational angular momentum distributions with the collisional orientation. These correlations ultimately provide information on the anisotropic part of the reaction potential energy surface. They conclude with a brief outline of possible future directions in oriented molecule scattering

Orientaciones de meta como mediadoras en la relación entre perfeccionismo y ansiedad precompetitiva. [Goal orientations as mediators in the relationship between perfectionism and precompetitive anxiety].

Directory of Open Access Journals (Sweden)

Heriberto Antonio Pineda-Espejel

2018-04-01

orientations, and precompetitive anxiety and self-confidence, through two models that analyze sequential relationships. A first model analyzed the effect of global perfectionism in competition, on goal orientations, and consequences of precompetitive anxiety and self-confidence. Subsequently, perfectionism was separated into two dimensions, positive and negative, from the facets of striving for perfection, and negative reactions to imperfection, respectively. Such a model proved the sequence: two facets of multidimensional perfectionism in competition, goal orientations, and consequences of precompetitive anxiety and self-confidence. Additionally, the mediating role of goal orientations within the second model was analyzed. 171 high-performance athletes of both sexes, with an age of 23.5 years participated in the study, who answered a set of questionnaires to measure the study variables before the competition. The results of structural equation models showed that global perfectionism predicts ego orientation and cognitive anxiety. However, the two facets of perfectionism positively predict ego orientation and anxiety symptoms. Contrary to the striving for perfection also positively predicts the orientation in the task, and this negatively both anxieties. In conclusion, it is reinforced that state perfectionism can be an adaptive trait, since the striving for perfection, if accompanied by a predominance of task orientation. So the goal orientations theoretically explain the relationship between the striving for perfection and precompetitive anxiety.

Efficient Wavefield Extrapolation In Anisotropic Media

KAUST Repository

Alkhalifah, Tariq; Ma, Xuxin; Waheed, Umair bin; Zuberi, Mohammad Akbar Hosain

2014-01-01

Various examples are provided for wavefield extrapolation in anisotropic media. In one example, among others, a method includes determining an effective isotropic velocity model and extrapolating an equivalent propagation of an anisotropic, poroelastic or viscoelastic wavefield. The effective isotropic velocity model can be based upon a kinematic geometrical representation of an anisotropic, poroelastic or viscoelastic wavefield. Extrapolating the equivalent propagation can use isotopic, acoustic or elastic operators based upon the determined effective isotropic velocity model. In another example, non-transitory computer readable medium stores an application that, when executed by processing circuitry, causes the processing circuitry to determine the effective isotropic velocity model and extrapolate the equivalent propagation of an anisotropic, poroelastic or viscoelastic wavefield. In another example, a system includes processing circuitry and an application configured to cause the system to determine the effective isotropic velocity model and extrapolate the equivalent propagation of an anisotropic, poroelastic or viscoelastic wavefield.

Efficient Wavefield Extrapolation In Anisotropic Media

KAUST Repository

Alkhalifah, Tariq

2014-07-03

Various examples are provided for wavefield extrapolation in anisotropic media. In one example, among others, a method includes determining an effective isotropic velocity model and extrapolating an equivalent propagation of an anisotropic, poroelastic or viscoelastic wavefield. The effective isotropic velocity model can be based upon a kinematic geometrical representation of an anisotropic, poroelastic or viscoelastic wavefield. Extrapolating the equivalent propagation can use isotopic, acoustic or elastic operators based upon the determined effective isotropic velocity model. In another example, non-transitory computer readable medium stores an application that, when executed by processing circuitry, causes the processing circuitry to determine the effective isotropic velocity model and extrapolate the equivalent propagation of an anisotropic, poroelastic or viscoelastic wavefield. In another example, a system includes processing circuitry and an application configured to cause the system to determine the effective isotropic velocity model and extrapolate the equivalent propagation of an anisotropic, poroelastic or viscoelastic wavefield.

Identifying Achievement Goals and Their Relationship to Academic Achievement in Undergraduate Pharmacy Students

Science.gov (United States)

Sainsbury, Erica; Rose, Grenville; Smith, Lorraine

2014-01-01

Objectives. To compare the achievement goal orientations of first-year with those of third-year undergraduate Australian pharmacy students and to examine the relationship of goal orientations to academic achievement. Methods. The Achievement Goal Questionnaire was administered to first-year and third-year students during class time. Students’ grades were obtained from course coordinators. Results. More first-year students adopted performance-approach and mastery-approach goals than did third-year students. Performance-approach goals were positively correlated with academic achievement in the first year. Chinese Australian students scored the highest in adopting performance-approach goals. Vietnamese Australian students adopted mastery-avoidance goals more than other ethnicities. First-year students were more strongly performance approach goal-oriented than third-year students. Conclusion. Adopting performance-approach goals was positively correlated with academic achievement, while adopting avoidance goals was not. Ethnicity has an effect on the adoption of achievement goals and academic achievement. PMID:25258438

Investigate the effect of anisotropic order parameter on the specific heat of anisotropic two-band superconductors

International Nuclear Information System (INIS)

Udomsamuthirun, P.; Peamsuwan, R.; Kumvongsa, C.

2009-01-01

The effect of anisotropic order parameter on the specific heat of anisotropic two-band superconductors in BCS weak-coupling limit is investigated. An analytical specific heat jump and the numerical specific heat are shown by using anisotropic order parameters, and the electron-phonon interaction and non-electron-phonon interaction. The two models of anisotropic order parameters are used for numerical calculation that we find little effect on the numerical results. The specific heat jump of MgB 2 , Lu 2 Fe 3 Si 5 and Nb 3 Sn superconductors can fit well with both of them. By comparing the experimental data with overall range of temperature, the best fit is Nb 3 Sn, MgB 2 , and Lu 2 Fe 3 Si 5 superconductors.

Evolutionary programming for goal-driven dynamic planning

Science.gov (United States)

Vaccaro, James M.; Guest, Clark C.; Ross, David O.

2002-03-01

Many complex artificial intelligence (IA) problems are goal- driven in nature and the opportunity exists to realize the benefits of a goal-oriented solution. In many cases, such as in command and control, a goal-oriented approach may be the only option. One of many appropriate applications for such an approach is War Gaming. War Gaming is an important tool for command and control because it provides a set of alternative courses of actions so that military leaders can contemplate their next move in the battlefield. For instance, when making decisions that save lives, it is necessary to completely understand the consequences of a given order. A goal-oriented approach provides a slowly evolving tractably reasoned solution that inherently follows one of the principles of war: namely concentration on the objective. Future decision-making will depend not only on the battlefield, but also on a virtual world where military leaders can wage wars and determine their options by playing computer war games much like the real world. The problem with these games is that the built-in AI does not learn nor adapt and many times cheats, because the intelligent player has access to all the information, while the user has access to limited information provided on a display. These games are written for the purpose of entertainment and actions are calculated a priori and off-line, and are made prior or during their development. With these games getting more sophisticated in structure and less domain specific in scope, there needs to be a more general intelligent player that can adapt and learn in case the battlefield situations or the rules of engagement change. One such war game that might be considered is Risk. Risk incorporates the principles of war, is a top-down scalable model, and provides a good application for testing a variety of goal- oriented AI approaches. By integrating a goal-oriented hybrid approach, one can develop a program that plays the Risk game effectively and move

Controlling Nanocrystal Superlattice Symmetry and Shape-Anisotropic Interactions through Variable Ligand Surface Coverage

KAUST Repository

Choi, Joshua J.; Bealing, Clive R.; Bian, Kaifu; Hughes, Kevin J.; Zhang, Wenyu; Smilgies, Detlef-M.; Hennig, Richard G.; Engstrom, James R.; Hanrath, Tobias

2011-01-01

The assembly of colloidal nanocrystals (NCs) into superstructures with long-range translational and orientational order is sensitive to the molecular interactions between ligands bound to the NC surface. We illustrate how ligand coverage on colloidal PbS NCs can be exploited as a tunable parameter to direct the self-assembly of superlattices with predefined symmetry. We show that PbS NCs with dense ligand coverage assemble into face-centered cubic (fcc) superlattices whereas NCs with sparse ligand coverage assemble into body-centered cubic (bcc) superlattices which also exhibit orientational ordering of NCs in their lattice sites. Surface chemistry characterization combined with density functional theory calculations suggest that the loss of ligands occurs preferentially on {100} than on reconstructed {111} NC facets. The resulting anisotropic ligand distribution amplifies the role of NC shape in the assembly and leads to the formation of superlattices with translational and orientational order. © 2011 American Chemical Society.

Controlling Nanocrystal Superlattice Symmetry and Shape-Anisotropic Interactions through Variable Ligand Surface Coverage

KAUST Repository

Choi, Joshua J.

2011-03-09

The assembly of colloidal nanocrystals (NCs) into superstructures with long-range translational and orientational order is sensitive to the molecular interactions between ligands bound to the NC surface. We illustrate how ligand coverage on colloidal PbS NCs can be exploited as a tunable parameter to direct the self-assembly of superlattices with predefined symmetry. We show that PbS NCs with dense ligand coverage assemble into face-centered cubic (fcc) superlattices whereas NCs with sparse ligand coverage assemble into body-centered cubic (bcc) superlattices which also exhibit orientational ordering of NCs in their lattice sites. Surface chemistry characterization combined with density functional theory calculations suggest that the loss of ligands occurs preferentially on {100} than on reconstructed {111} NC facets. The resulting anisotropic ligand distribution amplifies the role of NC shape in the assembly and leads to the formation of superlattices with translational and orientational order. © 2011 American Chemical Society.

Anisotropic elastic plates

CERN Document Server

Hwu, Chyanbin

2010-01-01

As structural elements, anisotropic elastic plates find wide applications in modern technology. The plates here are considered to be subjected to not only in plane load but also transverse load. In other words, both plane and plate bending problems as well as the stretching-bending coupling problems are all explained in this book. In addition to the introduction of the theory of anisotropic elasticity, several important subjects have are discussed in this book such as interfaces, cracks, holes, inclusions, contact problems, piezoelectric materials, thermoelastic problems and boundary element a

SIMULATION OF QUALITY GOALS: A MISSING LINK BETWEEN CORPORATE STRATEGY AND BUSINESS PROCESS MANAGEMENT

Directory of Open Access Journals (Sweden)

Zora Arsovski

2009-12-01

Full Text Available This paper describes design methodology for quality goals simulation model as a supporting tool for quality goal-directed decision-making at strategic management level. The paper presents such an integrated, system (MIS/DES and draw attention to the essential role of simulation based strategic quality goal-directed decision-making within it. With proposed approach it is possible to converge, or focus, comprehensive but static MIS knowledge in dynamic simulation models and to fully utilize prediction power of simulation for effective and integrated quality goal-directed strategic decision making. Importance of modeling in field of control, equality of knowledge and models, dynamic nature and complexity of models and real systems from viewpoint of modern cybernetic science are also presented in the paper. The final goal is a purposeful decision-making simulation system that guides in the right direction strategically focused management action promising implementation of strategic plans and achievement of related quality goals. In its experimental section the paper describes a quality goals model designed for concrete environment. Overall model structure, components structure, components relations, mathematical models, and other elements of modeling approach are also given in this section. Finally, an example of successfully designed simulation solution is given. The approach presented in the paper gives verbal and mathematical problem description, builds ontology of quality goals problem domain, uses Extended Petri Nets as modeling tools in order to obtain faithful model which easily can be replicated in object oriented class and object hierarchy.

Modelling of ultrasonic nondestructive testing in anisotropic materials - Rectangular crack

International Nuclear Information System (INIS)

Bostroem, A.

2001-12-01

Nondestructive testing with ultrasound is a standard procedure in the nuclear power industry when searching for defects, in particular cracks. To develop and qualify testing procedures extensive experimental work on test blocks is usually required. This can take a lot of time and therefore be quite costly. A good mathematical model of the testing situation is therefore of great value as it can reduce the experimental work to a great extent. A good model can be very useful for parametric studies and as a pedagogical tool. A further use of a model is as a tool in the qualification of personnel. In anisotropic materials, e.g. austenitic welds, the propagation of ultrasound becomes much more complicated as compared to isotropic materials. Therefore, modelling is even more useful for anisotropic materials, and it in particular has a greater pedagogical value. The present project has been concerned with a further development of the anisotropic capabilities of the computer program UTDefect, which has so far only contained a strip-like crack as the single defect type for anisotropic materials. To be more specific, the scattering by a rectangular crack in an anisotropic component has been studied and the result is adapted to include transmitting and receiving ultrasonic probes. The component under study is assumed to be anisotropic with arbitrary anisotropy. On the other hand, it is assumed to be homogeneous, and this in particular excludes most welds, where it is seldom an adequate approximation to assume homogeneity. The anisotropy may be arbitrarily oriented and the same is true of the rectangular crack. The crack may also be located near a backside of the component. To solve the scattering problem for the crack an integral equation method is used. The probe model has been developed in an earlier project and to compute the signal response in the receiving probe an electromechanical reciprocity argument is employed. As a rectangle is a truly 3D scatterer the sizes of the

The relationship between competitive anxiety, achievement goals, and motivational climates.

Science.gov (United States)

Ntoumanis, N; Biddle, S

1998-06-01

The purpose of this study was to examine the relationships of achievement goal orientations and perceived motivational climate to perceptions of the intensity and direction of competitive state anxiety in a sample of university athletes representing various team sports. Although some studies have demonstrated that task orientation and mastery climate are associated with adaptive emotional patterns and ego orientation and performance climate are linked to less adaptive emotions, others have not verified these findings. In the present study, structural equation modeling was used to test these links. The results showed that perceptions of a performance climate were associated with ego orientation, whereas perceptions of a mastery climate were linked to task orientation. Furthermore, no significant links were found between task orientation and direction of competitive anxiety, while it was shown that the impact of ego orientation on the intensity and direction of cognitive and somatic anxiety was exerted through self-confidence. No significant direct links were found between motivational climates and competitive anxiety, thus implying that motivational climates may have an indirect impact on affective responses through the different goal orientations. The findings of the present study are discussed along with suggestions for examining situational and individual difference variables that may explain the relationships between intensity and direction of competitive anxiety and achievement goals and motivational climates.

Efficient Hardware Implementation For Fingerprint Image Enhancement Using Anisotropic Gaussian Filter.

Science.gov (United States)

Khan, Tariq Mahmood; Bailey, Donald G; Khan, Mohammad A U; Kong, Yinan

2017-05-01

A real-time image filtering technique is proposed which could result in faster implementation for fingerprint image enhancement. One major hurdle associated with fingerprint filtering techniques is the expensive nature of their hardware implementations. To circumvent this, a modified anisotropic Gaussian filter is efficiently adopted in hardware by decomposing the filter into two orthogonal Gaussians and an oriented line Gaussian. An architecture is developed for dynamically controlling the orientation of the line Gaussian filter. To further improve the performance of the filter, the input image is homogenized by a local image normalization. In the proposed structure, for a middle-range reconfigurable FPGA, both parallel compute-intensive and real-time demands were achieved. We manage to efficiently speed up the image-processing time and improve the resource utilization of the FPGA. Test results show an improved speed for its hardware architecture while maintaining reasonable enhancement benchmarks.

Effect of the substrate orientation on the formation of He-plates in Si

International Nuclear Information System (INIS)

Vallet, M.; Barbot, J. F.; Declémy, A.; Beaufort, M. F.; Reboh, S.

2013-01-01

The effect of the crystalline orientation on the implantation-induced strain/stress and on the formation of He-plates was studied by combining high-resolution X-ray scattering and transmission electron microscopy. The highest strains are obtained in (001)-oriented implanted substrates regardless of the fluence and of the channeling effects. The anisotropic properties of the silicon that generate an anisotropic elastic response of the substrate were taken into account to explain these different values of strain. Upon specific thermal annealing, it is shown that the formation of He-plates occurs only in the (001) habit planes regardless of the orientation of the substrates, non-tilted and tilted (001)-, (110)-, and (111)-substrates. Moreover, the distribution of He-plates in the (001) variants was found to be strongly dependent on the angle of the habit plane with the surface and on the intensity of the implantation-induced strain/stress. The implantation-induced stress thus favors the formation of He-plates in specific planes (of low angle with the surface) forming different defect configurations. The nucleation and growth of He-plates are thus discussed with regard to the implantation-induced stress

Modeling of fiber orientation in viscous fluid flow with application to self-compacting concrete

Science.gov (United States)

Kolařík, Filip; Patzák, Bořek

2013-10-01

In recent years, unconventional concrete reinforcement is of growing popularity. Especially fiber reinforcement has very wide usage in high performance concretes like "Self Compacting Concrete" (SCC). The design of advanced tailor-made structures made of SCC can take advantage of anisotropic orientation of fibers. Tools for fiber orientation predictions can contribute to design of tailor made structure and allow to develop casting procedures that enable to achieve the desired fiber distribution and orientation. This paper deals with development and implementation of suitable tool for prediction of fiber orientation in a fluid based on the knowledge of the velocity field. Statistical approach to the topic is employed. Fiber orientation is described by a probability distribution of the fiber angle.

Anisotropic thermal conductivity in epoxy-bonded magnetocaloric composites

Science.gov (United States)

Weise, Bruno; Sellschopp, Kai; Bierdel, Marius; Funk, Alexander; Bobeth, Manfred; Krautz, Maria; Waske, Anja

2016-09-01

Thermal management is one of the crucial issues in the development of magnetocaloric refrigeration technology for application. In order to ensure optimal exploitation of the materials "primary" properties, such as entropy change and temperature lift, thermal properties (and other "secondary" properties) play an important role. In magnetocaloric composites, which show an increased cycling stability in comparison to their bulk counterparts, thermal properties are strongly determined by the geometric arrangement of the corresponding components. In the first part of this paper, the inner structure of a polymer-bonded La(Fe, Co, Si)13-composite was studied by X-ray computed tomography. Based on this 3D data, a numerical study along all three spatial directions revealed anisotropic thermal conductivity of the composite: Due to the preparation process, the long-axis of the magnetocaloric particles is aligned along the xy plane which is why the in-plane thermal conductivity is larger than the thermal conductivity along the z-axis. Further, the study is expanded to a second aspect devoted to the influence of particle distribution and alignment within the polymer matrix. Based on an equivalent ellipsoids model to describe the inner structure of the composite, numerical simulation of the thermal conductivity in different particle arrangements and orientation distributions were performed. This paper evaluates the possibilities of microstructural design for inducing and adjusting anisotropic thermal conductivity in magnetocaloric composites.

Cracking on anisotropic neutron stars

Science.gov (United States)

Setiawan, A. M.; Sulaksono, A.

2017-07-01

We study the effect of cracking of a local anisotropic neutron star (NS) due to small density fluctuations. It is assumed that the neutron star core consists of leptons, nucleons and hyperons. The relativistic mean field model is used to describe the core of equation of state (EOS). For the crust, we use the EOS introduced by Miyatsu et al. [1]. Furthermore, two models are used to describe pressure anisotropic in neutron star matter. One is proposed by Doneva-Yazadjiev (DY) [2] and the other is proposed by Herrera-Barreto (HB) [3]. The anisotropic parameter of DY and HB models are adjusted in order the predicted maximum mass compatible to the mass of PSR J1614-2230 [4] and PSR J0348+0432 [5]. We have found that cracking can potentially present in the region close to the neutron star surface. The instability due cracking is quite sensitive to the NS mass and anisotropic parameter used.

Response of the Pre-oriented Goal-directed Attention to Usual and Unusual Distractors: A Preliminary Study

Directory of Open Access Journals (Sweden)

Golnaz Baghdadi

2017-03-01

Full Text Available Introduction: In this study, we investigated the distraction power of the unusual and usual images on the attention of 20 healthy primary school children. Methods: Our study was different from previous ones in that the participants were asked to fix the initial position of their attention on a pre-defined location after being presented with unusual images as distractors. The goals were presented in locations, which were far from the attraction basin of distractors. Our expectation was that the pre-orienting of the attention to the position of targets can reduce the attractive effect of unusual images compared to the usual ones. The percentage of correct responses and the reaction time have been measured as behavioral indicators of attention performance. Results: Results showed that using the goal-directed attention, subjects ignored both kinds of distractors nearly the same way. Conclusion: With regard to previous reports about the more attraction towards the unusual images, it is suggested that the dynamics of the visual attention system be sensitive to the initial condition. That is, changing the initial position of the attention can lead to the decrement of the unusual images’ effects. However, several other possibilities such as a probable delay in processing unusual features could explain this observation, too. 

A new spin-oriented nuclei facility: POLAREX

Directory of Open Access Journals (Sweden)

Etilé A.

2014-03-01

Full Text Available Using the On-Line Nuclear Orientation method, POLAREX (POLARization of EXotic nuclei is a new facility allowing to study the anisotropic decay of spin-oriented nuclei. Based on the combination of on-line implantation of radioactive nuclei with Low Temperature Nuclear Orientation technique and Nuclear Magnetic Resonance, POLAREX allows to measure nuclear electromagnetic moments and ground-state spins, in the aim to get information about the wave function composition of the nuclear state. Polarized nuclei can also be used to study fundamental interactions involving nuclear β-decay asymmetries. The POLAREX infrastructure will be installed at Accélérateur Linéaire auprés du Tandem d’Orsay in order to study neutron-rich nuclei, some of which have not been studied yet. Will be presented here, all the possibilities of this new facility and a non exhaustive scientific program.

Analysis of the project synthesis goal cluster orientation and inquiry emphasis of elementary science textbooks

Science.gov (United States)

Staver, John R.; Bay, Mary

The purpose of this descriptive study was to examine selected units of commonly used elementary science texts, using the Project Synthesis goal clusters as a framework for part of the examination. An inquiry classification scheme was used for the remaining segment. Four questions were answered: (1) To what extent do elementary science textbooks focus on each Project Synthesis goal cluster? (2) In which part of the text is such information found? (3) To what extent are the activities and experiments merely verifications of information already introduced in the text? (4) If inquiry is present in an activity, then what is the level of such inquiry?Eleven science textbook series, which comprise approximately 90 percent of the national market, were selected for analysis. Two units, one primary (K-3) and one intermediate (4-6), were selected for analysis by first identifying units common to most series, then randomly selecting one primary and one intermediate unit for analysis.Each randomly selected unit was carefully read, using the sentence as the unit of analysis. Each declarative and interrogative sentence in the body of the text was classified as: (1) academic; (2) personal; (3) career; or (4) societal in its focus. Each illustration, except those used in evaluation items, was similarly classified. Each activity/experiment and each miscellaneous sentence in end-of-chapter segments labelled review, summary, evaluation, etc., were similarly classified. Finally, each activity/experiment, as a whole, was categorized according to a four-category inquiry scheme (confirmation, structured inquiry, guided inquiry, open inquiry).In general, results of the analysis are: (1) most text prose focuses on academic science; (2) most remaining text prose focuses on the personal goal cluster; (3) the career and societal goal clusters receive only minor attention; (4) text illustrations exhibit a pattern similar to text prose; (5) text activities/experiments are academic in orientation

Inverse anisotropic conductivity from internal current densities

International Nuclear Information System (INIS)

Bal, Guillaume; Guo, Chenxi; Monard, François

2014-01-01

This paper concerns the reconstruction of a fully anisotropic conductivity tensor γ from internal current densities of the form J = γ∇u, where u solves a second-order elliptic equation ∇ · (γ∇u) = 0 on a bounded domain X with prescribed boundary conditions. A minimum number of n + 2 such functionals known on Y⊂X, where n is the spatial dimension, is sufficient to guarantee a unique and explicit reconstruction of γ locally on Y. Moreover, we show that γ is reconstructed with a loss of one derivative compared to errors in the measurement of J in the general case and no loss of derivatives in the special case where γ is scalar. We also describe linear combinations of mixed partial derivatives of γ that exhibit better stability properties and hence can be reconstructed with better resolution in practice. (paper)

Achievement Goal Orientations and Self Handicapping as Mediator and Moderator of the Relationship between Intrinsic Achievement Motivation and Negative Automatic Thoughts in Adolescence Students

Science.gov (United States)

Kapikiran, Sahin

2012-01-01

The main purpose of this study was to examine the mediator and moderator role of self-handicapping and achievement goal orientations variables on the relationship between negative automatic thoughts intrinsic achievement motivation in high school students. 586 high school students, ranging in age from 14 to 20 (M = 16.08), adolescence students…

Measurement of Perceived Parental Success Standards in Sport and Relations with Athletes’ Self-Esteem, Performance Anxiety, and Achievement Goal Orientation: Comparing Parental and Coach Influences

Directory of Open Access Journals (Sweden)

Frank J. Schwebel

2016-01-01

Full Text Available The Perceived Parent Success Standards Scale (PPSSS, adapted from the Perception of Success Questionnaire constructed by Roberts et al. (1998 to measure athletes’ achievement goal orientation, provides a measure of athletes’ perceptions of mastery- and ego-oriented parental success criteria, a central component of parental motivational climate. This study focused on 543 young athletes (ages 9–16 on 82 teams in recreational basketball leagues. The PPSSS exhibited strong factorial validity, construct validity, and orthogonality between ego and mastery factors that allow for different combinations of these factors to be tested. We also compared the impact of the motivational climates created by coaches and success standards conveyed by parents on postseason athlete outcome measures of anxiety, self-esteem, and achievement goal orientation. Correlational and multilevel regression analyses revealed that both coach and parent variables were significantly related to the athlete variables. However, mediational analyses indicated that parental success standards mediated relations between coach-initiated climate and all of the outcome variables, reflecting the power of parental socialization processes. We discuss potential reasons for the greater parental influence shown in this and a previous study, and we suggest directions for further research as well as possible interventions that can help both coaches and parents create a more positive athletic environment for young athletes.

Anisotropic constitutive equations for the viscoplastic behaviour of the single crystal superalloy CMSX-4

International Nuclear Information System (INIS)

Fleury, G.; Schubert, F.

1997-09-01

Nickel-base superalloy blades of the first rotor stage in a gas turbine have to withstand extremely severe thermomechanical loading conditions. Single crystal blades exhibit a highly anisotropic deformation behaviour and are subjected to triaxial stress fields induced by complex cooling systems. Consequently the prediction of their deformation behaviour requires constitutive equations based on multiaxial formulations. The microstructural evolution of γ/γ' superalloys during the service time modifies the material properties and has therefore to be taken into account in the constitutive equations. For the modelling of the anisotropic, viscoplastic behaviour of single crystal blades taking into account the evolution of the microstructure, a microstructure-dependent, orthotropic Hills potential, whose anisotropy coefficients are connected to the edge length of the γ'-particles, is applied. The prediction was validated by investigating the deformation behaviour of the superalloy CMSX-4 in the range of temperatures [750 C-950 C]. If the shape of γ'-particles remain cubic, for example, in creep testing at low temperatures (up to about 850 C), the microstructure-dependent potential leads to the cubic version of the Hills potential. The prediction is in good agreement with creep results for left angle 001 right angle - and left angle 111 right angle - orientated specimens but overestimates the creep resistance of left angle 011 right angle - orientated specimens. (orig.)

Prediction of yield and long-term failure of oriented polypropylene: kinetics and anisotropy

NARCIS (Netherlands)

van Erp, T.B.; Reynolds, C.T.; Peijs, T.; van Dommelen, J.A.W.; Govaert, L.E.

2009-01-01

The time-dependent yield and failure behavior of off-axis loaded uniaxially oriented polypropy-lene tape is investigated. The yield and failure behavior is described with an anisotropic vis-coplastic model. A viscoplastic flow rule is used with an equivalent stress, based on Hill’sanisotropic yield

Anchoring Distortions Coupled with Plane Couette & Poiseuille Flows of Nematic Polymers in Viscous Solvents: Morphology in Molecular Orientation, Stress & Flow

National Research Council Canada - National Science Library

Zhou, Hong; Forest, M. G

2006-01-01

.... The morphology has various physical realizations, all coupled through the model equations: the orientational distribution of the ensemble of rods, anisotropic viscoelastic stresses, and flow feedback...

Anisotropic intrinsic spin Hall effect in quantum wires

International Nuclear Information System (INIS)

Cummings, A W; Akis, R; Ferry, D K

2011-01-01

We use numerical simulations to investigate the spin Hall effect in quantum wires in the presence of both Rashba and Dresselhaus spin-orbit coupling. We find that the intrinsic spin Hall effect is highly anisotropic with respect to the orientation of the wire, and that the nature of this anisotropy depends strongly on the electron density and the relative strengths of the Rashba and Dresselhaus spin-orbit couplings. In particular, at low densities, when only one subband of the quantum wire is occupied, the spin Hall effect is strongest for electron momentum along the [1-bar 10] axis, which is the opposite of what is expected for the purely 2D case. In addition, when more than one subband is occupied, the strength and anisotropy of the spin Hall effect can vary greatly over relatively small changes in electron density, which makes it difficult to predict which wire orientation will maximize the strength of the spin Hall effect. These results help to illuminate the role of quantum confinement in spin-orbit-coupled systems, and can serve as a guide for future experimental work on the use of quantum wires for spin-Hall-based spintronic applications. (paper)

3D highly oriented nanoparticulate and microparticulate array of metal oxide materials

International Nuclear Information System (INIS)

Vayssieres, Lionel; Guo, Jinghua; Nordgren, Joseph

2006-01-01

Advanced nano and micro particulate thin films of 3d transition and post-transition metal oxides consisting of nanorods and microrods with parallel and perpendicular orientation with respect to the substrate normal, have been successfully grown onto various substrates by heteronucleation, without template and/or surfactant, from the aqueous condensation of solution of metal salts or metal complexes (aqueous chemical growth). Three-dimensional arrays of iron oxide nanorods and zinc oxide nanorods with parallel and perpendicular orientation are presented as well as the oxygen K-edge polarization dependent x-ray absorption spectroscopy (XAS) study of anisotropic perpendicularly oriented microrod array of ZnO performed at synchrotron radiation source facility

Orienting Oneself for Leadership: The Role of Goal Orientation in Leader Developmental Readiness.

Science.gov (United States)

Culbertson, Satoris S; Jackson, Alexander T

2016-01-01

The ways in which individuals approach achievement situations influence their use of self-management activities such as goal setting, feedback seeking, and developmental strategies, and ultimately impact success in leader development. © 2016 Wiley Periodicals, Inc., A Wiley Company.

Anisotropic Weyl invariance

Energy Technology Data Exchange (ETDEWEB)

Perez-Nadal, Guillem [Universidad de Buenos Aires, Buenos Aires (Argentina)

2017-07-15

We consider a non-relativistic free scalar field theory with a type of anisotropic scale invariance in which the number of coordinates ''scaling like time'' is generically greater than one. We propose the Cartesian product of two curved spaces, the metric of each space being parameterized by the other space, as a notion of curved background to which the theory can be extended. We study this type of geometries, and find a family of extensions of the theory to curved backgrounds in which the anisotropic scale invariance is promoted to a local, Weyl-type symmetry. (orig.)

Examining a negative halo effect to anabolic steroids users through perceived achievement goals, sportspersonship orientations, and aggressive tendencies.

Science.gov (United States)

Chantal, Yves; Bernache-Assollant, Iouri; Schiano-Lomoriello, Sandrine

2013-04-01

We investigated the social image of anabolic steroids (AS) users grounding our analysis on the achievement goal theory of Nicholls. Our main goal was to explore how an athlete's acceptance of AS use would impact on the way that athlete will be perceived by others. Non-AS-using participants reacted to one of two scenarios portraying a male athlete either accepting or refusing to engage in drug use behavior. The results suggested that the acceptance of anabolic steroids yielded an unfavorable social image--perceivers inferred a predominant ego orientation to characterize the AS-user's motivation as well as weaker sportspersonship and a stronger proclivity for reactive aggression than instrumental aggression. Moreover, the analyses did not yield significant gender or interaction effects. Finally, those findings are commented in view of methodological shortcomings and of the perspectives that they may offer for future research concerning the motivational aspects of the social perceptions of drug use in sport. © 2013 The Authors. Scandinavian Journal of Psychology © 2013 The Scandinavian Psychological Associations.

To master or perform? Exploring relations between achievement goals and conceptual change learning.

Science.gov (United States)

Ranellucci, John; Muis, Krista R; Duffy, Melissa; Wang, Xihui; Sampasivam, Lavanya; Franco, Gina M

2013-09-01

Research is needed to explore conceptual change in relation to achievement goal orientations and depth of processing. To address this need, we examined relations between achievement goals, use of deep versus shallow processing strategies, and conceptual change learning using a think-aloud protocol. Seventy-three undergraduate students were assessed on their prior knowledge and misconceptions about Newtonian mechanics, and then reported their achievement goals and participated in think-aloud protocols while reading Newtonian physics texts. A mastery-approach goal orientation positively predicted deep processing strategies, shallow processing strategies, and conceptual change. In contrast, a performance-approach goal orientation did not predict either of the processing strategies, but negatively predicted conceptual change. A performance-avoidance goal orientation negatively predicted deep processing strategies and conceptual change. Moreover, deep and shallow processing strategies positively predicted conceptual change as well as recall. Finally, both deep and shallow processing strategies mediated relations between mastery-approach goals and conceptual change. Results provide some support for Dole and Sinatra's (1998) Cognitive Reconstruction of Knowledge Model of conceptual change but also challenge specific facets with regard to the role of depth of processing in conceptual change. © 2012 The British Psychological Society.

Fortran programs for the time-dependent Gross-Pitaevskii equation in a fully anisotropic trap

Science.gov (United States)

Muruganandam, P.; Adhikari, S. K.

2009-10-01

Here we develop simple numerical algorithms for both stationary and non-stationary solutions of the time-dependent Gross-Pitaevskii (GP) equation describing the properties of Bose-Einstein condensates at ultra low temperatures. In particular, we consider algorithms involving real- and imaginary-time propagation based on a split-step Crank-Nicolson method. In a one-space-variable form of the GP equation we consider the one-dimensional, two-dimensional circularly-symmetric, and the three-dimensional spherically-symmetric harmonic-oscillator traps. In the two-space-variable form we consider the GP equation in two-dimensional anisotropic and three-dimensional axially-symmetric traps. The fully-anisotropic three-dimensional GP equation is also considered. Numerical results for the chemical potential and root-mean-square size of stationary states are reported using imaginary-time propagation programs for all the cases and compared with previously obtained results. Also presented are numerical results of non-stationary oscillation for different trap symmetries using real-time propagation programs. A set of convenient working codes developed in Fortran 77 are also provided for all these cases (twelve programs in all). In the case of two or three space variables, Fortran 90/95 versions provide some simplification over the Fortran 77 programs, and these programs are also included (six programs in all). Program summaryProgram title: (i) imagetime1d, (ii) imagetime2d, (iii) imagetime3d, (iv) imagetimecir, (v) imagetimesph, (vi) imagetimeaxial, (vii) realtime1d, (viii) realtime2d, (ix) realtime3d, (x) realtimecir, (xi) realtimesph, (xii) realtimeaxial Catalogue identifier: AEDU_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEDU_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data

Orientationally ordered phase produced by fully antinematic interactions: A simulation study

Science.gov (United States)

Romano, Silvano; de Matteis, Giovanni

2011-07-01

We consider here a classical model, consisting of D2h symmetric particles, whose centers of mass are associated with a three-dimensional simple-cubic lattice; the pair potential is isotropic in orientation space, and restricted to nearest neighbors. Two orthonormal triads define orientations of a pair of interacting particles; the simplest potential models proposed in the literature can be written as a linear combination involving the squares of the scalar products between corresponding unit vectors only, thus depending on three parameters, and making the interaction model rather versatile. A coupling constant with negative sign tends to keep the two interacting unit vectors parallel to each other, whereas a positive sign tends to keep them mutually orthogonal (antinematic coupling). We address here a special, extreme case of the above family, involving only antinematic couplings: more precisely, three antinematic terms whose coefficients are set to a common positive value (hence the name PPP model). The model under investigation produces a doubly degenerate pair ground state; the nearest-neighbor range of the interaction and the bipartite character of the lattice can propagate the pair ground state and increase the overall degeneracy, but without producing frustration. The model was investigated by a simplified molecular field treatment as well as by Monte Carlo simulation, whose results suggested a second-order transition to a low-temperature biaxially ordered phase; ground-state configurations producing orientational order have been selected by thermal fluctuations. The molecular field treatment also predicted a continuous transition, and was found to overestimate the transition temperature by a factor 2.

Rigorous theory of molecular orientational nonlinear optics

International Nuclear Information System (INIS)

Kwak, Chong Hoon; Kim, Gun Yeup

2015-01-01

Classical statistical mechanics of the molecular optics theory proposed by Buckingham [A. D. Buckingham and J. A. Pople, Proc. Phys. Soc. A 68, 905 (1955)] has been extended to describe the field induced molecular orientational polarization effects on nonlinear optics. In this paper, we present the generalized molecular orientational nonlinear optical processes (MONLO) through the calculation of the classical orientational averaging using the Boltzmann type time-averaged orientational interaction energy in the randomly oriented molecular system under the influence of applied electric fields. The focal points of the calculation are (1) the derivation of rigorous tensorial components of the effective molecular hyperpolarizabilities, (2) the molecular orientational polarizations and the electronic polarizations including the well-known third-order dc polarization, dc electric field induced Kerr effect (dc Kerr effect), optical Kerr effect (OKE), dc electric field induced second harmonic generation (EFISH), degenerate four wave mixing (DFWM) and third harmonic generation (THG). We also present some of the new predictive MONLO processes. For second-order MONLO, second-order optical rectification (SOR), Pockels effect and difference frequency generation (DFG) are described in terms of the anisotropic coefficients of first hyperpolarizability. And, for third-order MONLO, third-order optical rectification (TOR), dc electric field induced difference frequency generation (EFIDFG) and pump-probe transmission are presented

Direct measurements of conventional and anisotropic magnetocaloric effect in binary RAl2 single crystals

Science.gov (United States)

Monteiro, J. C. B.; Gandra, F. G.

2017-06-01

We report on specific heat and magnetocaloric effect (MCE) measurements in single crystals of HoAl2, DyAl2, and TbAl2 measured by a heat flux technique using Peltier devices. Those compounds order ferromagnetically at 31 K, 61 K, and 106 K respectively, and present a spin reorientation transition (SRT) below TC. We study the dependence of the SRT with magnetic field and temperature by means of specific heat measurements performed in single crystals oriented at the [" separators="| 100 ], [" separators="| 110 ], and [" separators="| 111 ] directions with the aid of calculations using a simple model. We obtained the conventional MCE for HoAl2 and TbAl2 and also the anisotropic version of the effect obtained indirectly from the specific heat for TbAl2 and DyAl2. We also present the results for a direct determination of the anisotropic MCE for DyAl2 by measuring the heat flux generated by a rotation of the single crystal under constant field.

Non-uniform self-assembly: On the anisotropic architecture of α-synuclein supra-fibrillar aggregates.

Science.gov (United States)

Semerdzhiev, Slav A; Shvadchak, Volodymyr V; Subramaniam, Vinod; Claessens, Mireille M A E

2017-08-09

Although the function of biopolymer hydrogels in nature depends on structural anisotropy at mesoscopic length scales, the self-assembly of such anisotropic structures in vitro is challenging. Here we show that fibrils of the protein α-synuclein spontaneously self-assemble into structurally anisotropic hydrogel particles. While the fibrils in the interior of these supra-fibrillar aggregates (SFAs) are randomly oriented, the fibrils in the periphery prefer to cross neighboring fibrils at high angles. This difference in organization coincides with a significant difference in polarity of the environment in the central and peripheral parts of the SFA. We rationalize the structural anisotropy of SFAs in the light of the observation that αS fibrils bind a substantial amount of counterions. We propose that, with the progress of protein polymerization into fibrils, this binding of counterions changes the ionic environment which triggers a change in fibril organization resulting in anisotropy in the architecture of hydrogel particles.

Modeling of anisotropic wound healing

Science.gov (United States)

Valero, C.; Javierre, E.; García-Aznar, J. M.; Gómez-Benito, M. J.; Menzel, A.

2015-06-01

Biological soft tissues exhibit non-linear complex properties, the quantification of which presents a challenge. Nevertheless, these properties, such as skin anisotropy, highly influence different processes that occur in soft tissues, for instance wound healing, and thus its correct identification and quantification is crucial to understand them. Experimental and computational works are required in order to find the most precise model to replicate the tissues' properties. In this work, we present a wound healing model focused on the proliferative stage that includes angiogenesis and wound contraction in three dimensions and which relies on the accurate representation of the mechanical behavior of the skin. Thus, an anisotropic hyperelastic model has been considered to analyze the effect of collagen fibers on the healing evolution of an ellipsoidal wound. The implemented model accounts for the contribution of the ground matrix and two mechanically equivalent families of fibers. Simulation results show the evolution of the cellular and chemical species in the wound and the wound volume evolution. Moreover, the local strain directions depend on the relative wound orientation with respect to the fibers.

Continuum mechanics of anisotropic materials

CERN Document Server

Cowin, Stephen C

2013-01-01

Continuum Mechanics of Anisotropic Materials(CMAM) presents an entirely new and unique development of material anisotropy in the context of an appropriate selection and organization of continuum mechanics topics. These features will distinguish this continuum mechanics book from other books on this subject. Textbooks on continuum mechanics are widely employed in engineering education, however, none of them deal specifically with anisotropy in materials. For the audience of Biomedical, Chemical and Civil Engineering students, these materials will be dealt with more frequently and greater accuracy in their analysis will be desired. Continuum Mechanics of Anisotropic Materials' author has been a leader in the field of developing new approaches for the understanding of anisotropic materials.

Dynamics of anisotropic tissue growth

Energy Technology Data Exchange (ETDEWEB)

Bittig, Thomas; Juelicher, Frank [Max Planck Institute for the Physics of Complex Systems, Noethnitzer Strasse 38, 01187 Dresden (Germany); Wartlick, Ortrud; Kicheva, Anna; Gonzalez-Gaitan, Marcos [Department of Biochemistry and Department of Molecular Biology, Geneva University, Sciences II, Quai Ernest-Ansermet 30, 1211 Geneva 4 (Switzerland)], E-mail: Marcos.Gonzalez@biochem.unige.ch, E-mail: julicher@pks.mpg.de

2008-06-15

We study the mechanics of tissue growth via cell division and cell death (apoptosis). The rearrangements of cells can on large scales and times be captured by a continuum theory which describes the tissue as an effective viscous material with active stresses generated by cell division. We study the effects of anisotropies of cell division on cell rearrangements and show that average cellular trajectories exhibit anisotropic scaling behaviors. If cell division and apoptosis balance, there is no net growth, but for anisotropic cell division the tissue undergoes spontaneous shear deformations. Our description is relevant for the study of developing tissues such as the imaginal disks of the fruit fly Drosophila melanogaster, which grow anisotropically.

Long-wave model for strongly anisotropic growth of a crystal step.

Science.gov (United States)

Khenner, Mikhail

2013-08-01

A continuum model for the dynamics of a single step with the strongly anisotropic line energy is formulated and analyzed. The step grows by attachment of adatoms from the lower terrace, onto which atoms adsorb from a vapor phase or from a molecular beam, and the desorption is nonnegligible (the "one-sided" model). Via a multiscale expansion, we derived a long-wave, strongly nonlinear, and strongly anisotropic evolution PDE for the step profile. Written in terms of the step slope, the PDE can be represented in a form similar to a convective Cahn-Hilliard equation. We performed the linear stability analysis and computed the nonlinear dynamics. Linear stability depends on whether the stiffness is minimum or maximum in the direction of the step growth. It also depends nontrivially on the combination of the anisotropy strength parameter and the atomic flux from the terrace to the step. Computations show formation and coarsening of a hill-and-valley structure superimposed onto a long-wavelength profile, which independently coarsens. Coarsening laws for the hill-and-valley structure are computed for two principal orientations of a maximum step stiffness, the increasing anisotropy strength, and the varying atomic flux.

Nonlinear constitutive relations for anisotropic elastic materials

Science.gov (United States)

Sokolova, Marina; Khristich, Dmitrii

2018-03-01

A general approach to constructing of nonlinear variants of connection between stresses and strains in anisotropic materials with different types of symmetry of properties is considered. This approach is based on the concept of elastic proper subspaces of anisotropic materials introduced in the mechanics of solids by J. Rychlewski and on the particular postulate of isotropy proposed by A. A. Il’yushin. The generalization of the particular postulate on the case of nonlinear anisotropic materials is formulated. Systems of invariants of deformations as lengths of projections of the strain vector into proper subspaces are developed. Some variants of nonlinear constitutive relations for anisotropic materials are offered. The analysis of these relations from the point of view of their satisfaction to general and limit forms of generalization of partial isotropy postulate on anisotropic materials is performed. The relations for particular cases of anisotropy are written.

Orthonormal bases for anisotropic α-modulation spaces

DEFF Research Database (Denmark)

Rasmussen, Kenneth Niemann

2012-01-01

In this article we construct orthonormal bases for bi-variate anisotropic α-modulation spaces. The construction is based on generating a nice anisotropic α-covering and using carefully selected tensor products of univariate brushlet functions with regards to this covering. As an application, we...... show that n-term nonlinear approximation with the orthonormal bases in certain anisotropic α-modulation spaces can be completely characterized....

Orthonormal bases for anisotropic α-modulation spaces

DEFF Research Database (Denmark)

Rasmussen, Kenneth Niemann

In this article we construct orthonormal bases for bi-variate anisotropic α-modulation spaces. The construction is based on generating a nice anisotropic α-covering and using carefully selected tensor products of univariate brushlet functions with regards to this covering. As an application, we...... show that n-term nonlinear approximation with the orthonormal bases in certain anisotropic α-modulation spaces can be completely characterized....

Finite-volume scheme for anisotropic diffusion

Energy Technology Data Exchange (ETDEWEB)

Es, Bram van, E-mail: bramiozo@gmail.com [Centrum Wiskunde & Informatica, P.O. Box 94079, 1090GB Amsterdam (Netherlands); FOM Institute DIFFER, Dutch Institute for Fundamental Energy Research, The Netherlands" 1 (Netherlands); Koren, Barry [Eindhoven University of Technology (Netherlands); Blank, Hugo J. de [FOM Institute DIFFER, Dutch Institute for Fundamental Energy Research, The Netherlands" 1 (Netherlands)

2016-02-01

In this paper, we apply a special finite-volume scheme, limited to smooth temperature distributions and Cartesian grids, to test the importance of connectivity of the finite volumes. The area of application is nuclear fusion plasma with field line aligned temperature gradients and extreme anisotropy. We apply the scheme to the anisotropic heat-conduction equation, and compare its results with those of existing finite-volume schemes for anisotropic diffusion. Also, we introduce a general model adaptation of the steady diffusion equation for extremely anisotropic diffusion problems with closed field lines.

Are Teachers' Psychological Control, Autonomy Support and Autonomy Suppression Associated with Students' Goals?

Science.gov (United States)

Madjar, Nir; Nave, Adi; Hen, Shiran

2013-01-01

This study investigated associations between student-perceived teacher behaviours and students' personal goal orientations. Thus, the study applied theoretical concepts from self-determination theory and parenting style in an attempt to enhance understanding of additional environmental characteristics possibly affecting personal goal orientation.…

Analysis of electromagnetic scattering by uniaxial anisotropic bispheres.

Science.gov (United States)

Li, Zheng-Jun; Wu, Zhen-Sen; Li, Hai-Ying

2011-02-01

Based on the generalized multiparticle Mie theory and the Fourier transformation approach, electromagnetic (EM) scattering of two interacting homogeneous uniaxial anisotropic spheres with parallel primary optical axes is investigated. By introducing the Fourier transformation, the EM fields in the uniaxial anisotropic spheres are expanded in terms of the spherical vector wave functions. The interactive scattering coefficients and the expansion coefficients of the internal fields are derived through the continuous boundary conditions on which the interaction of the bispheres is considered. Some selected calculations on the effects of the size parameter, the uniaxial anisotropic absorbing dielectric, and the sphere separation distance are described. The backward radar cross section of two uniaxial anisotropic spheres with a complex permittivity tensor changing with the sphere separation distance is numerically studied. The authors are hopeful that the work in this paper will help provide an effective calibration for further research on the scattering characteristic of an aggregate of anisotropic spheres or other shaped anisotropic particles.

Anisotropic elliptic optical fibers

Science.gov (United States)

Kang, Soon Ahm

1991-05-01

The exact characteristic equation for an anisotropic elliptic optical fiber is obtained for odd and even hybrid modes in terms of infinite determinants utilizing Mathieu and modified Mathieu functions. A simplified characteristic equation is obtained by applying the weakly guiding approximation such that the difference in the refractive indices of the core and the cladding is small. The simplified characteristic equation is used to compute the normalized guide wavelength for an elliptical fiber. When the anisotropic parameter is equal to unity, the results are compared with the previous research and they are in close agreement. For a fixed value normalized cross-section area or major axis, the normalized guide wavelength lambda/lambda(sub 0) for an anisotropic elliptic fiber is small for the larger value of anisotropy. This condition indicates that more energy is carried inside of the fiber. However, the geometry and anisotropy of the fiber have a smaller effect when the normalized cross-section area is very small or very large.

Transient anisotropic magnetic field calculation

International Nuclear Information System (INIS)

Jesenik, Marko; Gorican, Viktor; Trlep, Mladen; Hamler, Anton; Stumberger, Bojan

2006-01-01

For anisotropic magnetic material, nonlinear magnetic characteristics of the material are described with magnetization curves for different magnetization directions. The paper presents transient finite element calculation of the magnetic field in the anisotropic magnetic material based on the measured magnetization curves for different magnetization directions. For the verification of the calculation method some results of the calculation are compared with the measurement

Imaging the Earth's anisotropic structure with Bayesian Inversion of fundamental and higher mode surface-wave dispersion data

Science.gov (United States)

Ravenna, Matteo; Lebedev, Sergei; Celli, Nicolas

2017-04-01

We develop a Markov Chain Monte Carlo inversion of fundamental and higher mode phase-velocity curves for radially and azimuthally anisotropic structure of the crust and upper mantle. In the inversions of Rayleigh- and Love-wave dispersion curves for radially anisotropic structure, we obtain probabilistic 1D radially anisotropic shear-velocity profiles of the isotropic average Vs and anisotropy (or Vsv and Vsh) as functions of depth. In the inversions for azimuthal anisotropy, Rayleigh-wave dispersion curves at different azimuths are inverted for the vertically polarized shear-velocity structure (Vsv) and the 2-phi component of azimuthal anisotropy. The strength and originality of the method is in its fully non-linear approach. Each model realization is computed using exact forward calculations. The uncertainty of the models is a part of the output. In the inversions for azimuthal anisotropy, in particular, the computation of the forward problem is performed separately at different azimuths, with no linear approximations on the relation of the Earth's elastic parameters to surface wave phase velocities. The computations are performed in parallel in order reduce the computing time. We compare inversions of the fundamental mode phase-velocity curves alone with inversions that also include overtones. The addition of higher modes enhances the resolving power of the anisotropic structure of the deep upper mantle. We apply the inversion method to phase-velocity curves in a few regions, including the Hangai dome region in Mongolia. Our models provide constraints on the Moho depth, the Lithosphere-Asthenosphere Boundary, and the alignment of the anisotropic fabric and the direction of current and past flow, from the crust down to the deep asthenosphere.

Growth and anisotropic transport properties of self-assembled InAs nanostructures in InP

International Nuclear Information System (INIS)

Bierwagen, O.

2007-01-01

Self-assembled InAs nanostructures in InP, comprising quantum wells, quantum wires, and quantum dots, are studied in terms of their formation and properties. In particular, the structural, optical, and anisotropic transport properties of the nanostructures are investigated. The focus is a comprehending exploration of the anisotropic in-plane transport in large ensembles of laterally coupled InAs nanostructures. The self-assembled Stranski-Krastanov growth of InAs nanostructures is studied by gas-source molecular beam epitaxy on both nominally oriented and vicinal InP(001). Optical polarization of the interband transitions arising from the nanostructure type is demonstrated by photoluminescence and transmission spectroscopy. The experimentally convenient four-contact van der Pauw Hall measurement of rectangularly shaped semiconductors, usually applied to isotropic systems, is extended to yield the anisotropic transport properties. Temperature dependent transport measurements are performed in large ensembles of laterally closely spaced nanostructures. The transport of quantum wire-, quantum dash- and quantum dot containing samples is highly anisotropic with the principal axes of conductivity aligned to the directions. The direction of higher mobility is [ anti 110], which is parallel to the direction of the quantum wires. In extreme cases, the anisotropies exceed 30 for electrons, and 100 for holes. The extreme anisotropy for holes is due to diffusive transport through extended states in the [ anti 110], and hopping transport through laterally localized states in the [110] direction, within the same sample. A novel 5-terminal electronic switching device based on gate-controlled transport anisotropy is proposed. The gate-control of the transport anisotropy in modulation-doped, self-organized InAs quantum wires embedded in InP is demonstrated. (orig.)

Growth and anisotropic transport properties of self-assembled InAs nanostructures in InP

Energy Technology Data Exchange (ETDEWEB)

Bierwagen, O.

2007-12-20

Self-assembled InAs nanostructures in InP, comprising quantum wells, quantum wires, and quantum dots, are studied in terms of their formation and properties. In particular, the structural, optical, and anisotropic transport properties of the nanostructures are investigated. The focus is a comprehending exploration of the anisotropic in-plane transport in large ensembles of laterally coupled InAs nanostructures. The self-assembled Stranski-Krastanov growth of InAs nanostructures is studied by gas-source molecular beam epitaxy on both nominally oriented and vicinal InP(001). Optical polarization of the interband transitions arising from the nanostructure type is demonstrated by photoluminescence and transmission spectroscopy. The experimentally convenient four-contact van der Pauw Hall measurement of rectangularly shaped semiconductors, usually applied to isotropic systems, is extended to yield the anisotropic transport properties. Temperature dependent transport measurements are performed in large ensembles of laterally closely spaced nanostructures. The transport of quantum wire-, quantum dash- and quantum dot containing samples is highly anisotropic with the principal axes of conductivity aligned to the <110> directions. The direction of higher mobility is [ anti 110], which is parallel to the direction of the quantum wires. In extreme cases, the anisotropies exceed 30 for electrons, and 100 for holes. The extreme anisotropy for holes is due to diffusive transport through extended states in the [ anti 110], and hopping transport through laterally localized states in the [110] direction, within the same sample. A novel 5-terminal electronic switching device based on gate-controlled transport anisotropy is proposed. The gate-control of the transport anisotropy in modulation-doped, self-organized InAs quantum wires embedded in InP is demonstrated. (orig.)

The Predictiveness of Achievement Goals

Directory of Open Access Journals (Sweden)

Huy P. Phan

2013-11-01

Full Text Available Using the Revised Achievement Goal Questionnaire (AGQ-R (Elliot & Murayama, 2008, we explored first-year university students’ achievement goal orientations on the premise of the 2 × 2 model. Similar to recent studies (Elliot & Murayama, 2008; Elliot & Thrash, 2010, we conceptualized a model that included both antecedent (i.e., enactive learning experience and consequence (i.e., intrinsic motivation and academic achievement of achievement goals. Two hundred seventy-seven university students (151 women, 126 men participated in the study. Structural equation modeling procedures yielded evidence that showed the predictive effects of enactive learning experience and mastery goals on intrinsic motivation. Academic achievement was influenced intrinsic motivation, performance-approach goals, and enactive learning experience. Enactive learning experience also served as an antecedent of the four achievement goal types. On the whole, evidence obtained supports the AGQ-R and contributes, theoretically, to 2 × 2 model.

Differences in Learning Strategies, Goal Orientations, and Self-Concept between Overachieving, Normal-Achieving, and Underachieving Secondary Students

Science.gov (United States)

Castejón, Juan L.; Gilar, Raquel; Veas, Alejandro; Miñano, Pablo

2016-01-01

The aims of this work were to identify and establish differential characteristics in learning strategies, goal orientations, and self-concept between overachieving, normal-achieving and underachieving secondary students. A total of 1400 Spanish first and second year high school students from the South-East geographical area participated in this study. Three groups of students were established: a group with underachieving students, a group with a normal level of achievement, and a third group with overachieving students. The students were assigned to each group depending on the residual punctuations obtained from a multiple regression analysis in which the punctuation of an IQ test was the predictor and a measure composed of the school grades of nine subjects was the criteria. The results of one-way ANOVA and the Games-Howell post-hoc test showed that underachieving students had significantly lower punctuations in all of the measures of learning strategies and learning goals, as well as all of the academic self-concept, personal self-concept, parental relationship, honesty, and personal stability factors. In contrast, overachieving students had higher punctuations than underachieving students in the same variables and higher punctuations than normal-achieving students in most of the variables in which significant differences were detected. These results have clear educational implications. PMID:27729879

Views on the Anisotropic Nature of Ilva Valley Region

Directory of Open Access Journals (Sweden)

GABRIELA-ALINA MUREŞAN

2012-01-01

Full Text Available There are two concepts important for the authors of this article: anisotropic region and anisotropic space. Anisotropic region is defined by A. Dauphiné, the geographer (-mathematician, as a territorial unit whose structure results from the organisation of space along one or more axes. From the point of view of a territorial system, this type of region has some characteristics which differentiate it both from the homogeneous region and from the polarised one. These specificities have been analysed for Ilva Valley. The region of Ilva Valley is formed along the morphological axis represented by the Ilva River. The aim is to identify these specificities or their absence within this region. In this way we can determine whether this region is an anisotropic one or just an anisotropic space, namely whether it can be considered as evolving towards an anisotropic region, not yet complying with all characteristics of anisotropic regions.

Effective medium theory for anisotropic metamaterials

KAUST Repository

Zhang, Xiujuan

2015-01-20

Materials with anisotropic material parameters can be utilized to fabricate many fascinating devices, such as hyperlenses, metasolids, and one-way waveguides. In this study, we analyze the effects of geometric anisotropy on a two-dimensional metamaterial composed of a rectangular array of elliptic cylinders and derive an effective medium theory for such a metamaterial. We find that it is possible to obtain a closed-form analytical solution for the anisotropic effective medium parameters, provided the aspect ratio of the lattice and the eccentricity of the elliptic cylinder satisfy certain conditions. The derived effective medium theory not only recovers the well-known Maxwell-Garnett results in the quasi-static regime, but is also valid beyond the long-wavelength limit, where the wavelength in the host medium is comparable to the size of the lattice so that previous anisotropic effective medium theories fail. Such an advance greatly broadens the applicable realm of the effective medium theory and introduces many possibilities in the design of structures with desired anisotropic material characteristics. A real sample of a recently theoretically proposed anisotropic medium, with a near-zero index to control the flux, is achieved using the derived effective medium theory, and control of the electromagnetic waves in the sample is clearly demonstrated.

Strong and anisotropic magnetoelectricity in composites of magnetostrictive Ni and solid-state grown lead-free piezoelectric BZT–BCT single crystals

Directory of Open Access Journals (Sweden)

Haribabu Palneedi

2017-03-01

Full Text Available Aimed at developing lead-free magnetoelectric (ME composites with performances as good as lead (Pb-based ones, this study employed (001 and (011 oriented 82BaTiO3-10BaZrO3-8CaTiO3 (BZT–BCT piezoelectric single crystals, fabricated by the cost-effective solid-state single crystal growth (SSCG method, in combination with inexpensive, magnetostrictive base metal Nickel (Ni. The off-resonance, direct ME coupling in the prepared Ni/BZT–BCT/Ni laminate composites was found to be strongly dependent on the crystallographic orientation of the BZT–BCT single crystals, as well as the applied magnetic field direction. Larger and anisotropic ME voltage coefficients were observed for the composite made using the (011 oriented BZT–BCT single crystal. The optimized ME coupling of 1 V/cm Oe was obtained from the Ni/(011 BZT–BCT single crystal/Ni composite, in the d32 mode of the single crystal, when a magnetic field was applied along its [100] direction. This performance is similar to that reported for the Ni/Pb(Mg1/3Nb2/3O3-Pb(Zr,TiO3 (PMN–PZT single crystal/Ni, but larger than that obtained from the Ni/Pb(Zr,TiO3 ceramic/Ni composites. The results of this work demonstrate that the use of lead-free piezoelectric single crystals with special orientations permits the selection of desired anisotropic properties, enabling the realization of customized ME effects in composites.

Anisotropic kinetic energy release and gyroscopic behavior of CO2 super rotors from an optical centrifuge

Science.gov (United States)

Murray, Matthew J.; Ogden, Hannah M.; Mullin, Amy S.

2017-10-01

An optical centrifuge is used to generate an ensemble of CO2 super rotors with oriented angular momentum. The collision dynamics and energy transfer behavior of the super rotor molecules are investigated using high-resolution transient IR absorption spectroscopy. New multipass IR detection provides improved sensitivity to perform polarization-dependent transient studies for rotational states with 76 ≤ J ≤ 100. Polarization-dependent measurements show that the collision-induced kinetic energy release is spatially anisotropic and results from both near-resonant energy transfer between super rotor molecules and non-resonant energy transfer between super rotors and thermal molecules. J-dependent studies show that the extent and duration of the orientational anisotropy increase with rotational angular momentum. The super rotors exhibit behavior akin to molecular gyroscopes, wherein molecules with larger amounts of angular momentum are less likely to change their angular momentum orientation through collisions.

Tunneling anisotropic magnetoresistance driven by magnetic phase transition.

Science.gov (United States)

Chen, X Z; Feng, J F; Wang, Z C; Zhang, J; Zhong, X Y; Song, C; Jin, L; Zhang, B; Li, F; Jiang, M; Tan, Y Z; Zhou, X J; Shi, G Y; Zhou, X F; Han, X D; Mao, S C; Chen, Y H; Han, X F; Pan, F

2017-09-06

The independent control of two magnetic electrodes and spin-coherent transport in magnetic tunnel junctions are strictly required for tunneling magnetoresistance, while junctions with only one ferromagnetic electrode exhibit tunneling anisotropic magnetoresistance dependent on the anisotropic density of states with no room temperature performance so far. Here, we report an alternative approach to obtaining tunneling anisotropic magnetoresistance in α'-FeRh-based junctions driven by the magnetic phase transition of α'-FeRh and resultantly large variation of the density of states in the vicinity of MgO tunneling barrier, referred to as phase transition tunneling anisotropic magnetoresistance. The junctions with only one α'-FeRh magnetic electrode show a magnetoresistance ratio up to 20% at room temperature. Both the polarity and magnitude of the phase transition tunneling anisotropic magnetoresistance can be modulated by interfacial engineering at the α'-FeRh/MgO interface. Besides the fundamental significance, our finding might add a different dimension to magnetic random access memory and antiferromagnet spintronics.Tunneling anisotropic magnetoresistance is promising for next generation memory devices but limited by the low efficiency and functioning temperature. Here the authors achieved 20% tunneling anisotropic magnetoresistance at room temperature in magnetic tunnel junctions with one α'-FeRh magnetic electrode.

A Variational Approach to Perturbed Discrete Anisotropic Equations

Directory of Open Access Journals (Sweden)

Amjad Salari

2016-01-01

Full Text Available We continue the study of discrete anisotropic equations and we will provide new multiplicity results of the solutions for a discrete anisotropic equation. We investigate the existence of infinitely many solutions for a perturbed discrete anisotropic boundary value problem. The approach is based on variational methods and critical point theory.

In-plane microwave dielectric properties of paraelectric barium strontium titanate thin films with anisotropic epitaxy

Science.gov (United States)

Simon, W. K.; Akdogan, E. K.; Safari, A.; Bellotti, J. A.

2005-08-01

In-plane dielectric properties of ⟨110⟩ oriented epitaxial (Ba0.60Sr0.40)TiO3 thin films in the thickness range from 25-1200nm have been investigated under the influence of anisotropic epitaxial strains from ⟨100⟩ NdGaO3 substrates. The measured dielectric properties show strong residual strain and in-plane directional dependence. Below 150nm film thickness, there appears to be a phase transition due to the anisotropic nature of the misfit strain relaxation. In-plane relative permittivity is found to vary from as much as 500-150 along [11¯0] and [001] respectively, in 600nm thick films, and from 75 to 500 overall. Tunability was found to vary from as much as 54% to 20% in all films and directions, and in a given film the best tunability is observed along the compressed axis in a mixed strain state, 54% along [11¯0] in the 600nm film for example.

Effect of polyurethane scaffold architecture on ingrowth speed and collagen orientation in a subcutaneous rat pocket model

International Nuclear Information System (INIS)

De Mulder, E L W; Hannink, G; Verdonschot, N; Buma, P

2013-01-01

Clinically used scaffolds are suboptimal in regenerating the highly oriented meniscus fiber structure in full meniscal defects. The objective of this study was to test whether anisotropic porous scaffolds with channels resulted in a more meniscus like matrix organization compared to isotropic porous scaffolds. Isotropic polyurethane scaffolds were made via standard solvent leaching techniques. Anisotropic porous scaffolds with channels were made via modified thermal induced phase separation. Both scaffold types were analyzed with light microscopy, scanning electron microscopy and computed nano-tomography. Finally, isotropic and anisotropic scaffolds were bilaterally and subcutaneously implanted on the back of 32 Wistar rats for 1, 4, 8 and 24 weeks to assess tissue ingrowth and matrix organization. Isotropic scaffolds had a pore diameter of 35±14.7 μm and a degree of anisotropy of 0.18, while anisotropic scaffolds had a channel diameter of 20±6.0 μm and a degree of anisotropy of 0.39. After implantation full tissue ingrowth was achieved after 8 and 24 weeks for isotropic and anisotropic, respectively. Isotropic scaffolds had a random tissue infiltration with unorganized collagen deposition, whereas anisotropic scaffolds showed tissue infiltration and collagen alignment in the direction of the channels. Anisotropic scaffolds resulted in a matrix organization that resembled the tissue in the vascularized zone of the meniscus, while isotropic scaffolds resembled the tissue in the avascular zone of the meniscus. (paper)

The theory of experience orientation

DEFF Research Database (Denmark)

Jensen, Jesper Legaard

2012-01-01

This paper describes the theory of experience orientation, which builds on the division of experiences in two categories: Goal-oriented and Omni-oriented. The theory comes from preliminary studies of userexperiences in a work-context, where I have found this distinction to be beneficial....... In this paper I explain the theory behind it and the practical application of such a distinction when designing for an experience....

Controllable helical deformations on printed anisotropic composite soft actuators

Science.gov (United States)

Wang, Dong; Li, Ling; Serjouei, Ahmad; Dong, Longteng; Weeger, Oliver; Gu, Guoying; Ge, Qi

2018-04-01

Helical shapes are ubiquitous in both nature and engineering. However, the development of soft actuators and robots that mimic helical motions has been hindered primarily due to the lack of efficient modeling approaches that take into account the material anisotropy and the directional change of the external loading point. In this work, we present a theoretical framework for modeling controllable helical deformations of cable-driven, anisotropic, soft composite actuators. The framework is based on the minimum potential energy method, and its model predictions are validated by experiments, where the microarchitectures of the soft composite actuators can be precisely defined by 3D printing. We use the developed framework to investigate the effects of material and geometric parameters on helical deformations. The results show that material stiffness, volume fraction, layer thickness, and fiber orientation can be used to control the helical deformation of a soft actuator. In particular, we found that a critical fiber orientation angle exists at which the twist of the actuator changes the direction. Thus, this work can be of great importance for the design and fabrication of soft actuators with tailored deformation behavior.

Nonlinear and anisotropic tensile properties of graft materials used in soft tissue applications.

Science.gov (United States)

Yoder, Jonathon H; Elliott, Dawn M

2010-05-01

The mechanical properties of extracellular matrix grafts that are intended to augment or replace soft tissues should be comparable to the native tissue. Such grafts are often used in fiber-reinforced tissue applications that undergo multi-axial loading and therefore knowledge of the anisotropic and nonlinear properties are needed, including the moduli and Poisson's ratio in two orthogonal directions within the plane of the graft. The objective of this study was to measure the tensile mechanical properties of several marketed grafts: Alloderm, Restore, CuffPatch, and OrthADAPT. The degree of anisotropy and non-linearity within each graft was evaluated from uniaxial tensile tests and compared to their native tissue. The Alloderm graft was anisotropic in both the toe- and linear-region of the stress-strain response, was highly nonlinear, and generally had low properties. The Restore and CuffPatch grafts had similar stress-strain responses, were largely isotropic, had a linear-region modulus of 18MPa, and were nonlinear. OrthADAPT was anisotropic in the linear-region (131 MPA vs 47MPa in the toe-region) and was highly nonlinear. The Poisson ratio for all grafts was between 0.4 and 0.7, except for the parallel orientation of Restore which was greater than 1.0. Having an informed understanding of how the available grafts perform mechanically will allow for better assessment by the physician for which graft to apply depending upon its application. Copyright 2010 Elsevier Ltd. All rights reserved.

Effects of achievement goals on challenge seeking and feedback processing: behavioral and FMRI evidence.

Directory of Open Access Journals (Sweden)

Woogul Lee

Full Text Available We conducted behavioral and functional magnetic resonance imaging (fMRI research to investigate the effects of two types of achievement goals--mastery goals and performance-approach goals--on challenge seeking and feedback processing. The results of the behavioral experiment indicated that mastery goals were associated with a tendency to seek challenge, both before and after experiencing difficulty during task performance, whereas performance-approach goals were related to a tendency to avoid challenge after encountering difficulty during task performance. The fMRI experiment uncovered a significant decrease in ventral striatal activity when participants received negative feedback for any task type and both forms of achievement goals. During the processing of negative feedback for the rule-finding task, performance-approach-oriented participants showed a substantial reduction in activity in the dorsolateral prefrontal cortex (DLPFC and the frontopolar cortex, whereas mastery-oriented participants showed little change. These results suggest that performance-approach-oriented participants are less likely to either recruit control processes in response to negative feedback or focus on task-relevant information provided alongside the negative feedback. In contrast, mastery-oriented participants are more likely to modulate aversive valuations to negative feedback and focus on the constructive elements of feedback in order to attain their task goals. We conclude that performance-approach goals lead to a reluctant stance towards difficulty, while mastery goals encourage a proactive stance.

Safety goals for future nuclear power plants

International Nuclear Information System (INIS)

Todreas, Neil E.

2001-01-01

This talk presents technology goals developed for Generation IV nuclear energy systems that can be made available to the market by 2030 or earlier. These goals are defined in the broad areas of sustainability, safety and reliability, and economics. Sustainability goals focus on fuel utilization, waste management, and proliferation resistance. Safety and reliability goals focus on safe and reliable operation, investment protection, and essentially eliminating the need for emergency response. Economics goals focus on competitive life cycle and energy production costs and financial risk. Future reactors fall in three categories - those which are: Certified or derivatives; Designed to a reasonable extent and based on available technology; In conceptual form only with potential to most fully satisfy the GENIV goals

Controlling coupled bending-twisting vibrations of anisotropic composite wing

Science.gov (United States)

Ryabov, Victor; Yartsev, Boris

2018-05-01

The paper discusses the possibility to control coupled bending-twisting vibrations of anisotropic composite wing by means of the monoclinic structures in the reinforcement of the plating. Decomposing the potential straining energy and kinetic energy of natural vibration modes into interacting and non-interacting parts, it became possible to introduce the two coefficients that integrally consider the effect of geometry and reinforcement structure upon the dynamic response parameters of the wing. The first of these coefficients describes the elastic coupling of the natural vibration modes, the second coefficient describes the inertial one. The paper describes the numerical studies showing how the orientation of considerably anisotropic CRP layers in the plating affects natural frequencies, loss factors, coefficients of elastic and inertial coupling for several lower tones of natural bending-twisting vibrations of the wing. Besides, for each vibration mode, partial values of the above mentioned dynamic response parameters were determined by means of the relationships for orthotropic structures where instead of "free" shearing modulus in the reinforcement plant, "pure" shearing modulus is used. Joint analysis of the obtained results has shown that each pair of bending-twisting vibration modes has its orientation angle ranges of the reinforcing layers where the inertial coupling caused by asymmetry of the cross-section profile with respect to the main axes of inertia decreases, down to the complete extinction, due to the generation of the elastic coupling in the plating material. These ranges are characterized by the two main features: 1) the difference in the natural frequencies of the investigated pair of bending-twisting vibration modes is the minimum and 2) natural frequencies of bending-twisting vibrations belong to a stretch restricted by corresponding partial natural frequencies of the investigated pair of vibration modes. This result is of practical importance

Theory of Langmuir probes in anisotropic plasmas

International Nuclear Information System (INIS)

Sudit, I.D.; Woods, R.C.

1994-01-01

A theory has been developed for electron retardation by Langmuir probes of several geometries in a general anisotropic plasma with arbitrary probe orientation and valid for any sheath thickness. Electron densities and electron velocity distribution functions (EVDFs) are obtained from the second derivative of probe I-V curves, as in Druyvesteyn's original method, which was developed for isotropic plasmas. Fedorov had extended the latter method in the context of a thin sheath approximation, to axisymmetric plasmas, in which the EVDF is expanded in a series of Legendary polynomials. In the present work an expansion in a series of spherical harmonics is employed, and the coordinate transformations are handled using the irreducible representation of the three dimensional rotation group. It is shown that the Volterra integral equations that must be solved to obtain the expansion coefficients of the EVDF from the second derivative data are no more complicated in the general case that hose for the axisymmetric plasma. Furthermore in the latter case the results can be shown to be equivalent to Fedrov's thin sheath expression. For the case of planar probes a formulation based on first derivatives of the I-V curves has been obtained. If data is obtained at enough different probe orientation of a one sided planar disc probe, any number of spherical harmonic coefficient functions may be obtained by inverting a set of linear equations and the complete EVDF deduced. For a cylindrical probe or a two-sided planar disc probe the integration of the second derivative of the probe current gives the exact electron density with any arbitrary probe orientation and any degree of plasma anisotropy

Oriented Morphology and Anisotropic Transport in Uniaxially Stretched Perfluorosulfonate Ionomer Membranes

Energy Technology Data Exchange (ETDEWEB)

J Park; J Li; G Divoux; L Madsen; R Moore

2011-12-31

Relations between morphology and transport sensitively govern proton conductivity in perfluorsulfonate ionomers (PFSIs) and thus determine useful properties of these technologically important materials. In order to understand such relations, we have conducted a broad systematic study of H{sup +}-form PFSI membranes over a range of uniaxial extensions and water uptakes. On the basis of small-angle X-ray scattering (SAXS) and {sup 2}H NMR spectroscopy, uniaxial deformation induces a strong alignment of ionic domains along the stretching direction. We correlate ionic domain orientation to transport using pulsed-field-gradient {sup 1}H NMR measurements of water diffusion coefficients along the three orthogonal membrane directions. Intriguingly, we observe that uniaxial deformation enhances water transport in one direction (parallel-to-draw direction) while reducing it in the other two directions (two orthogonal directions relative to the stretching direction). We evaluate another important transport parameter, proton conductivity, along two orthogonal in-plane directions. In agreement with water diffusion experiments, orientation of ionic channels increases proton conduction along the stretching direction while decreasing it in the perpendicular direction. These findings provide valuable fodder for optimal application of PFSI membranes as well as for the design of next generation polymer electrolyte membranes.

A Digital Tool Supporting Goal-Oriented Teaching in Classrooms

DEFF Research Database (Denmark)

Misfeldt, Morten; Bundsgaard, Jeppe; Slot, Marie Falkesgaard

2015-01-01

and objectives for their teaching; these form a challenge and a basis for developing a digital tool for mediating between curriculum and pedagogical practice. The motivation for revising the national curriculum and developing digital tools that support teaching is partly based on evidence that the previous...... national curriculum was not used to any particular extent by teachers (Danish Evaluation Institute 2012). Hence, the curriculum has been rebuilt based on recent trends in school development and curriculum research suggesting the importance of a competence framework, learning goals, and the aggregation...... of classroom data for efficient teaching (Earl and Fullan 2003). Learning goals are supposed to support the students’ pace and sense of progression, inform classroom decisions, structure teachers’ planning, and support the dialogue between teachers, students, and parents (Hattie 2009). Based on these concerns...

Axion as a Cold Dark Matter Candidate: Proof to Fully Nonlinear Order

Energy Technology Data Exchange (ETDEWEB)

Noh, Hyerim [Center for Large Telescope, Korea Astronomy and Space Science Institute, Daejon (Korea, Republic of); Hwang, Jai-chan [Department of Astronomy and Atmospheric Sciences, Kyungpook National University, Daegu (Korea, Republic of); Park, Chan-Gyung [Division of Science Education and Institute of Fusion Science, Chonbuk National University, Jeonju (Korea, Republic of)

2017-09-01

We present proof of the axion as a cold dark matter (CDM) candidate to the fully nonlinear order perturbations based on Einstein’s gravity. We consider the axion as a coherently oscillating massive classical scalar field without interaction. We present the fully nonlinear and exact, except for ignoring the transverse-tracefree tensor-type perturbation, hydrodynamic equations for an axion fluid in Einstein’s gravity. We show that the axion has the characteristic pressure and anisotropic stress; the latter starts to appear from the second-order perturbation. But these terms do not directly affect the hydrodynamic equations in our axion treatment. Instead, what behaves as the effective pressure term in relativistic hydrodynamic equations is the perturbed lapse function and the relativistic result coincides exactly with the one known in the previous non-relativistic studies. The effective pressure term leads to a Jeans scale that is of the solar-system scale for conventional axion mass. As the fully nonlinear and relativistic hydrodynamic equations for an axion fluid coincide exactly with the ones of a zero-pressure fluid in the super-Jeans scale, we have proved the CDM nature of such an axion in that scale.

Personal Goals and Academic Achievement among Theology Students

Science.gov (United States)

Litmanen, Topi; Hirsto, Laura; Lonka, Kirsti

2010-01-01

Studying in higher education requires long-term commitment. Previous studies have shown that commitment, perceived competence, intrinsic motivation and work-life orientation are positively related to academic achievement. This study examines the kinds of goals theology students have at the beginning of studies, and whether these goals are related…

Identity Processes and Intrinsic and Extrinsic Goal Pursuits: Directionality of Effects in College Students.

Science.gov (United States)

Luyckx, Koen; Duriez, Bart; Green, Lindsey M; Negru-Subtirica, Oana

2017-08-01

Identity research has mainly focused on the degree to which adolescents and emerging adults engage in exploration and commitment to identity goals and strivings. Somewhat lacking from this research tradition is an explicit focus on the content of the identity goals that individuals deem important and pursue. The present manuscript describes two longitudinal studies sampling college students in which we examine how exploration and commitment processes relate to intrinsic and extrinsic goal pursuits as defined in Self-Determination Theory. Study 1 was a two-wave longitudinal study spanning 6 months (N = 370; 77.4% women; mean age 18.24 years); Study 2 was a three-wave longitudinal study spanning 6 months (N = 458 students; 84.9% women; mean age 18.25 years). Using cross-lagged path analyses, hypotheses were supported to various degrees of convergence between studies, pointing to the extent of which results were replicated across our two independent longitudinal samples. Whereas an intrinsic goal orientation positively predicted commitment making (Study 1) and identification with commitment over time (Studies 1 and 2), an extrinsic goal orientation positively predicted ruminative exploration over time, which led to decreases in intrinsic orientation over time (Study 2). Further, an intrinsic goal orientation negatively predicted ruminative exploration over time (Study 1). The findings in for pro-active exploration processes were inconsistent across both studies, being prospectively related to both intrinsic (Study 2) and extrinsic goal orientations (Study 1). Implications and suggestions for future research are discussed.

Anisotropic dislocation loop nucleation in ion-irradiated MgAl2O4

International Nuclear Information System (INIS)

Zinkle, S.J.

1992-01-01

This work is intended to investigate the effects of transmutation products and varying ionizing-to-displacive damage ratio on microstructural evolution in ceramics for fusion machine. Polycrystalline disks of stoichiometric magnesium aluminate spinel (MgAl 2 O 4 ) were irradiated with 2 MeV Al + ions at 650C and subsequently analyzed in cross section using transmission electron microscopy (TEM). Interstitial dislocation loops were observed on [110] and [111] habit planes. The population of loops on both sets of habit planes was strongly dependent on their orientation with respect to the ion beam direction. The density of loops with habit plane normals nearly perpendicular to the ion beam direction was much higher than loops with habit plane normals nearly parallel to the ion beam direction. On the other hand, the loop size was nearly independent of habit plane orientation. This anisotropic loop nucleation does not occur in ion-irradiated metals such as copper and may be associated with the structure of displacement cascades in ceramics

Anisotropic stress rupture properties of the nickel-base single crystal superalloy SRR99

International Nuclear Information System (INIS)

Han, G.M.; Yu, J.J.; Sun, Y.L.; Sun, X.F.; Hu, Z.Q.

2010-01-01

The influence of orientation on the stress rupture properties of a single crystal superalloy SRR99 was investigated at temperatures of 760 and 1040 deg. C. It is found that the creep anisotropic behaviour is pronounced at the lower temperature of 760 deg. C and the stress rupture life ranks in the order [0 0 1] > [1 1 1] > [0 1 1]. Despite the anisotropy of stress rupture life is evidently reduced at the higher temperature, the [1 1 1] orientation exhibits the longest life. At 760 deg. C, EBSD (electron back scattered diffraction) was adopted to measure the lattice rotation and the deduced results indicate that the dominant slip systems are {1 1 1} during stress rupture test. At 1040 deg. C, the ranking order of the stress rupture life is [1 1 1] > [0 0 1] > [0 1 1] and the single crystal close to [0 1 1] orientation still shows the poorest life. In the [0 0 1] and [1 1 1] samples, regular γ' raft structure is formed compared with [0 1 1] samples. Further observations made by TEM investigations reveal the underlying deformation mechanisms for crystals with orientations near [0 0 1], [0 1 1] and [1 1 1] under two test conditions.

Can achievement goal theory provide a useful motivational perspective for explaining psychosocial attributes of medical students?

Directory of Open Access Journals (Sweden)

Madjar Nir

2012-01-01

Full Text Available Abstract Background Psychosocial competence and frustration tolerance are important characteristics of skilled medical professionals. In the present study we explored the usefulness of applying a comprehensive motivational theory (Goal orientations, for this purpose. According to goal orientation theory, learning motivation is defined as the general goals students pursue during learning (either mastery goals - gaining new knowledge; or performance goals - gaining a positive evaluation of competence or avoiding negative evaluation. Perceived psychosocial abilities are a desirable outcome, and low frustration tolerance (LFT, is a negative feature of student behavior. The hypothesis was that the mastery goal would be positively associated with psychosocial abilities while performance goals would be positively associated with LFT. Methods 143 first-year medical students completed at the end of an annual doctor-patient communication course a structured questionnaire that included measures of learning goal orientations (assessed by Pattern of Adaptive Learning Scale - PALS, psychosocial abilities (assessed by Psychological Medicine Inventory- student version -PMI-S and Low Frustration Tolerance (LFT. Results All study variables were found reliable (Cronbach's α ranged from .66 to .90 and normally distributed. Hierarchical multiple regression analysis revealed significant associations supporting the hypotheses. The mastery goal orientation was positively associated with perceived psychosocial abilities (PMI-S (β = .16, p Conclusions The results suggest that the goal orientations theory may be a useful theoretical framework for understanding and facilitating learning motivation among medical students. Limitations and suggestions for practice within medical education context are discussed.

Can achievement goal theory provide a useful motivational perspective for explaining psychosocial attributes of medical students?

Science.gov (United States)

Madjar, Nir; Bachner, Yaacov G; Kushnir, Talma

2012-01-12

Psychosocial competence and frustration tolerance are important characteristics of skilled medical professionals. In the present study we explored the usefulness of applying a comprehensive motivational theory (Goal orientations), for this purpose. According to goal orientation theory, learning motivation is defined as the general goals students pursue during learning (either mastery goals - gaining new knowledge; or performance goals - gaining a positive evaluation of competence or avoiding negative evaluation). Perceived psychosocial abilities are a desirable outcome, and low frustration tolerance (LFT), is a negative feature of student behavior. The hypothesis was that the mastery goal would be positively associated with psychosocial abilities while performance goals would be positively associated with LFT. 143 first-year medical students completed at the end of an annual doctor-patient communication course a structured questionnaire that included measures of learning goal orientations (assessed by Pattern of Adaptive Learning Scale - PALS), psychosocial abilities (assessed by Psychological Medicine Inventory- student version -PMI-S) and Low Frustration Tolerance (LFT). All study variables were found reliable (Cronbach's α ranged from .66 to .90) and normally distributed. Hierarchical multiple regression analysis revealed significant associations supporting the hypotheses. The mastery goal orientation was positively associated with perceived psychosocial abilities (PMI-S) (β = .16, p frustration tolerance (β = -.22, p frustration tolerance (β = .36, p < .001). The results suggest that the goal orientations theory may be a useful theoretical framework for understanding and facilitating learning motivation among medical students. Limitations and suggestions for practice within medical education context are discussed.

A goal-oriented requirements modelling language for enterprise architecture

NARCIS (Netherlands)

Quartel, Dick; Engelsman, W.; Jonkers, Henk; van Sinderen, Marten J.

2009-01-01

Methods for enterprise architecture, such as TOGAF, acknowledge the importance of requirements engineering in the development of enterprise architectures. Modelling support is needed to specify, document, communicate and reason about goals and requirements. Current modelling techniques for

Anisotropic magnetic properties of Dy{sub 6}Cr{sub 4}Al{sub 43} single crystal

Energy Technology Data Exchange (ETDEWEB)

Maurya, Arvind, E-mail: arvindmaurya@tifr.res.in; Thamizhavel, A., E-mail: arvindmaurya@tifr.res.in; Dhar, S. K., E-mail: arvindmaurya@tifr.res.in [Department of Condensed Matter Physics and Material Science, Tata Institute of Fundamental Research, Mumbai-400005 (India)

2014-04-24

We have studied the anisotropic magnetic behavior of the rare earth intermetallic compound Dy{sub 6}Cr{sub 4}Al{sub 43}. This compound crystallizes in the hexagonal symmetry and orders ferromagnetically at 8.3 K as confirmed by the magnetic susceptibility and heat capacity measurements. A significant anisotropy in the magnetization is observed between the c axis and the ab-plane. The easy axis liesin theab-plane at low temperatures; however it orients itselfalong the c-axis above 170 K as inferred from the susceptibility data.

Low-loss slot waveguides with silicon (111 surfaces realized using anisotropic wet etching

Directory of Open Access Journals (Sweden)

Kapil Debnath

2016-11-01

Full Text Available We demonstrate low-loss slot waveguides on silicon-on-insulator (SOI platform. Waveguides oriented along the (11-2 direction on the Si (110 plane were first fabricated by a standard e-beam lithography and dry etching process. A TMAH based anisotropic wet etching technique was then used to remove any residual side wall roughness. Using this fabrication technique propagation loss as low as 3.7dB/cm was realized in silicon slot waveguide for wavelengths near 1550nm. We also realized low propagation loss of 1dB/cm for silicon strip waveguides.

Exchange interaction of strongly anisotropic tripodal erbium single-ion magnets with metallic surfaces

DEFF Research Database (Denmark)

Dreiser, Jan; Wäckerlin, Christian; Ali, Md. Ehesan

2014-01-01

We present a comprehensive study of Er(trensal) single-ion magnets deposited in ultrahigh vacuum onto metallic surfaces. X-ray photoelectron spectroscopy reveals that the molecular structure is preserved after sublimation, and that the molecules are physisorbed on Au(111) while they are chemisorbed...... on a Ni thin film on Cu(100) single-crystalline surfaces. X-ray magnetic circular dichroism (XMCD) measurements performed on Au(111) samples covered with molecular monolayers held at temperatures down to 4 K suggest that the easy axes of the strongly anisotropic molecules are randomly oriented...... pathways toward optical addressing of surface-deposited single-ion magnets....

Theoretical and numerical study of highly anisotropic turbulent flows

NARCIS (Netherlands)

Biferale, L.; Daumont, I.; Lanotte, A.; Toschi, F.

2004-01-01

We present a detailed numerical study of anisotropic statistical fluctuations in stationary, homogeneous turbulent flows. We address both problems of intermittency in anisotropic sectors, and the relative importance of isotropic and anisotropic fluctuations at different scales on a direct numerical

Numerical simulation of anisotropic polymeric foams

Directory of Open Access Journals (Sweden)

Volnei Tita

Full Text Available This paper shows in detail the modelling of anisotropic polymeric foam under compression and tension loadings, including discussions on isotropic material models and the entire procedure to calibrate the parameters involved. First, specimens of poly(vinyl chloride (PVC foam were investigated through experimental analyses in order to understand the mechanical behavior of this anisotropic material. Then, isotropic material models available in the commercial software AbaqusTM were investigated in order to verify their ability to model anisotropic foams and how the parameters involved can influence the results. Due to anisotropy, it is possible to obtain different values for the same parameter in the calibration process. The obtained set of parameters are used to calibrate the model according to the application of the structure. The models investigated showed minor and major limitations to simulate the mechanical behavior of anisotropic PVC foams under compression, tension and multi-axial loadings. Results show that the calibration process and the choice of the material model applied to the polymeric foam can provide good quantitative results and save project time. Results also indicate what kind and order of error one will get if certain choices are made throughout the modelling process. Finally, even though the developed calibration procedure is applied to specific PVC foam, it still outlines a very broad drill to analyze other anisotropic cellular materials.

Compiling standardized information from clinical practice: using content analysis and ICF Linking Rules in a goal-oriented youth rehabilitation program.

Science.gov (United States)

Lustenberger, Nadia A; Prodinger, Birgit; Dorjbal, Delgerjargal; Rubinelli, Sara; Schmitt, Klaus; Scheel-Sailer, Anke

2017-09-23

To illustrate how routinely written narrative admission and discharge reports of a rehabilitation program for eight youths with chronic neurological health conditions can be transformed to the International Classification of Functioning, Disability and Health. First, a qualitative content analysis was conducted by building meaningful units with text segments assigned of the reports to the five elements of the Rehab-Cycle ® : goal; assessment; assignment; intervention; evaluation. Second, the meaningful units were then linked to the ICF using the refined ICF Linking Rules. With the first step of transformation, the emphasis of the narrative reports changed to a process oriented interdisciplinary layout, revealing three thematic blocks of goals: mobility, self-care, mental, and social functions. The linked 95 unique ICF codes could be grouped in clinically meaningful goal-centered ICF codes. Between the two independent linkers, the agreement rate was improved after complementing the rules with additional agreements. The ICF Linking Rules can be used to compile standardized health information from narrative reports if prior structured. The process requires time and expertise. To implement the ICF into common practice, the findings provide the starting point for reporting rehabilitation that builds upon existing practice and adheres to international standards. Implications for Rehabilitation This study provides evidence that routinely collected health information from rehabilitation practice can be transformed to the International Classification of Functioning, Disability and Health by using the "ICF Linking Rules", however, this requires time and expertise. The Rehab-Cycle ® , including assessments, assignments, goal setting, interventions and goal evaluation, serves as feasible framework for structuring this rehabilitation program and ensures that the complexity of local practice is appropriately reflected. The refined "ICF Linking Rules" lead to a standardized

Science Motivation of University Students: Achievement Goals as a Predictor

Science.gov (United States)

Arslan, Serhat; Akcaalan, Mehmet; Yurdakul, Cengiz

2017-01-01

The objective of this investigation is to make a study of the relationship between achievement goals and science motivation. Research data were collected from 295 university students. Achievement goals and science motivation scales were utilized as measure tools. The link between achievement goals orientation and science motivation was…