WorldWideScience

Sample records for fuer gasb-basierte vertikalresonator-laserdioden

  1. A DICOM based PACS for nuclear medicine; Ein DICOM-basiertes PACS fuer die Nuklearmedizin

    Energy Technology Data Exchange (ETDEWEB)

    Lassmann, M.; Reiners, C. [Wuerzburg Univ. (Germany). Klinik und Poliklinik fuer Nuklearmedizin

    2002-02-01

    Wuerzburg zusaetzlich zum RIS ein rein DICOM-basiertes PACS fuer die Nuklearmedizin in Betrieb genommen. Als bildgebende Modalitaeten der Nuklearmedizin sind derzeit sechs Gammakameras, ein PET-Scanner, ein Ultraschallgeraet sowie ein Knochendichtemessgeraet an das RIS/PACS gekoppelt. Das Datenaufkommen der bildgebenden Modalitaeten betraegt zurzeit 4 GByte pro Monat. Die vom KIS an das RIS uebermittelten Stammdaten werden mittels DICOM-Worklist an die Modalitaeten uebertragen. Damit ist die Abbildung eines durchgaengigen, DICOM-basierten Workflows von der Anmeldung bis zur Befunderhebung und Archivierung moeglich. Mit diesen PACS-Komponenten ist der Aufbau eines abteilungsspezifischen, rein DICOM-basierten Archivs fuer die Nuklearmedizin realisierbar. Probleme entstehen hauptsaechlich durch den komplexen DICOM-Standard fuer die Nuklearmedizin und die damit verbundene fehlerhafte bzw. mangelhaft an die Beduerfnisse der Nuklearmedizin angepasste Software-Implementierung an vielen Geraeten (vor allem PET). In Erprobung befindet sich eine auf Techniken des World Wide Web basierte Verteilungssoftware fuer nuklearmedizinische Bilder und Befunde. (orig.)

  2. The material system (AlGaIn)(AsSb). Properties and suitability for GaSb based vertical-resonator laser diodes; Das Materialsystem (AlGaIn)(AsSb). Eigenschaften und Eignung fuer GaSb-basierte Vertikalresonator-Laserdioden

    Energy Technology Data Exchange (ETDEWEB)

    Dier, Oliver

    2008-07-01

    The present thesis studies the particular properties of GaSb-based materials, where they differ from pure arsenides or phosphides, and also the impact of theses properties on long-wavelength vertical-cavity surface-emitting lasers (VCSELs). The goal is the first realisation of an electrically pumped VCSEL with a current aperture in this material system. After the basics, which are necessary for the understanding of the physical effects, the special features of antimony-containing materials are discussed with a focus on topics like band-structure, doping issues and miscibility gaps, which are relevant for devices. A VCSEL-structure optimized for long-wavelength applications is presented using an appropriate description of the device in its optical, electrical and thermal properties. A focus of this work is on the growth of laser-structures by molecular beam epitaxy. Annealing studies on this material showed a good prediction of the final wavelength after the temperature step, which is necessary due to the overgrowth of the tunnel-junction. The full-width at half maximum of the low-temperature photoluminescence signal shows a very low value of 3.95 meV for the quaternary active region. By using the type-II-band alignment of GaSb:Si and InAsSb:Si a low-resistive tunneljunction has been realised. After completion of the device processing a strong electroluminescence outside the DBR stopband and resonant modes within the stopband were found. A linear shift of the emission wavelength with temperature of 0.23 nm/K between -11 C and +30 C was found. (orig.)

  3. Panel-basierte Mixed-Methods-Studien

    OpenAIRE

    Legewie, Nicolas; Tucci, Ingrid

    2016-01-01

    Mixed-Methods-Studien erfreuen sich wachsender Beliebtheit. Immer mehr Studien nutzen dabei auch Panel-basierte Mixed-Methods-Designs, in denen bestehende Längsschnittstudien durch qualitative Befragungsformen ergänzt werden. Innerhalb der reichhaltigen Veröffentlichungen zum Thema Mixed-Methods-Forschung finden sich bisher aber kaum Diskussionen solcher Mixed-Methods-Designs. Im vorliegenden Artikel diskutieren wir Design, Durchführung, sowie Potenzialeund Herausforderungen von Panel-basiert...

  4. VIP Project - Visual based intelligent process control. Final report; VIP Projekt - Visuell basierte intelligente Prozessfuehrung. Fachlicher Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Moreno Rueda, R.

    2001-09-01

    This BMBF project comprised the development and testing of new process control strategies involving local resolution sensors and efficient simulation models. A system comprising a video section and a spectroscopic section is presented here. Further data can be processed in the master PC if desired. By analyzing every single burner, it is possible to analyze and optimize the complete combustion process. [German] Im Rahmen des BMBF-Projektes 'Visuell basierte Intelligente Prozessfuehrung fuer grosstechnische Feuerungsprozesse' wurden neuartige Prozessfuehrungsstrategien durch die Verbindung von ortsaufloesender Sensorik und leistungsfaehige Simulationsmodellen entwickelt und erprobt. Zur Loesung der gestellten Aufgaben wurde das hier dargestellte Gesamtsystem, bestehend aus Video- und Spektroskopie entwickelt. Ueber die Darstellung hinaus koennen im Master-PC auch die Daten weiterer Lanzen/Brenner verarbeitet werden. Die Vorortschraenke wie Kuehlmedien-Steuerschrank und Elektro-Steuerschrank koennen je nach Kesselabmassen auch fuer mehr als 2 Lanzen zusammengafasst werden. Durch die Betrachtung jedes einzelnen Brenners, wird es moeglich die Feuerung ganzheitlich und zeitgleich zu erfassen, zu beurteilen und zu optimieren. (orig.)

  5. Optical and structural characterization of GaSb and Te-doped GaSb single crystals

    International Nuclear Information System (INIS)

    Tirado-Mejia, L.; Villada, J.A.; Rios, M. de los; Penafiel, J.A.; Fonthal, G.; Espinosa-Arbelaez, D.G.; Ariza-Calderon, H.; Rodriguez-Garcia, M.E.

    2008-01-01

    Optical and structural properties of GaSb and Te-doped GaSb single crystals are reported herein. Utilizing the photoreflectance technique, the band gap energy for doped samples was obtained at 0.814 eV. Photoluminescence (PL) spectra showed a peak at 0.748 eV that according to this research, belongs to electronic states of pure GaSb and not to the longitudinal optical (LO) phonon replica as has been reported by other authors. Analysis of the full width at half maximum (FWHM) values of X-ray diffraction, as well as micro-Raman peaks showed that the inclusion of Te decreases the crystalline quality

  6. Residual carrier density in GaSb grown on Si substrates

    International Nuclear Information System (INIS)

    Akahane, Kouichi; Yamamoto, Naokatsu; Gozu, Shin-ichiro; Ueta, Akio; Ohtani, Naoki

    2006-01-01

    The relationships between the densities of residual carriers and those of dislocation in GaSb films grown on Si substrates were investigated. Dislocation density was evaluated by cross-sectional transmission electron microscopy (TEM). The TEM images indicated that the dislocation density after a 5-μm-thick GaSb film was grown was below 1 x 10 8 /cm 2 although the density near the interface between the Si substrate and the GaSb film was about 3 x 10 9 /cm 2 . Forming a dislocation loop by growing a thick GaSb layer may decrease the dislocation density. The density and mobility of the residual carrier were investigated by Hall measurement using the van der Pauw method. The residual carriers in GaSb grown on Si substrates were holes, and their densities decreased significantly from 4.2 x 10 18 to 1.4 x 10 17 /cm 3 as GaSb thickness was increased from 500 to 5500 nm

  7. Biocompatibility of GaSb thin films grown by RF magnetron sputtering

    Science.gov (United States)

    Nishimoto, Naoki; Fujihara, Junko; Yoshino, Katsumi

    2017-07-01

    GaSb may be suitable for biological applications, such as cellular sensors and bio-medical instrumentation because of its low toxicity compared with As (III) compounds and its band gap energy. Therefore, the biocompatibility and the film properties under physiological conditions were investigated for GaSb thin films with or without a surface coating. GaSb thin films were grown on quartz substrates by RF magnetron sputtering, and then coated with (3-mercaptopropyl) trimethoxysilane (MPT). The electrical properties, surface morphology, and crystal structure of the GaSb thin film were unaffected by the MPT coating. The cell viability assay suggested that MPT-coated GaSb thin films are biocompatible. Bare GaSb was particularly unstable in pH9 buffer. Ga elution was prevented by the MPT coating, although the Ga concentration in the pH 9 buffer was higher than that in the other solutions. The surface morphology and crystal structure were not changed by exposure to the solutions, except for the pH 9 buffer, and the thin film properties of MPT-coated GaSb exposed to distilled water and H2O2 in saline were maintained. These results indicate that MPT-coated GaSb thin films are biocompatible and could be used for temporary biomedical devices.

  8. GASB 35 Implementation Guide: Questions and Answers for Public Colleges and Universities Using Business Type Activity (BTA) Reporting. A Supplement to GASB's Implementation Guide for Statement 34

    Science.gov (United States)

    National Association of College and University Business Officers (NJ1), 2001

    2001-01-01

    This guide was prepared for public institution business officers as a supplement to the "Guide to Implementation of GASB Statement 54 on Basic Financial Statements--and Management's Discussion and Analysis--for State and Local Governments, published in April 2000 by the Governmental Accounting Standards Board (GASB) on GASB Statements 34 and 35.…

  9. Growth of GaSb1-xBix by molecular beam epitaxy

    DEFF Research Database (Denmark)

    Song, Yuxin; Wang, Shumin; Roy, Ivy Saha

    2012-01-01

    Molecular beam epitaxy for GaSb1-xBix is investigated in this article. The growth window for incorporation of Bi in GaSb was found. Strategies of avoiding formation of Bi droplets and enhancing Bi incorporation were studied. The Bi incorporation was confirmed by SIMS and RBS measurements. The Bi ......As substrates were compared and no apparent difference for Bi incorporation was found.......Molecular beam epitaxy for GaSb1-xBix is investigated in this article. The growth window for incorporation of Bi in GaSb was found. Strategies of avoiding formation of Bi droplets and enhancing Bi incorporation were studied. The Bi incorporation was confirmed by SIMS and RBS measurements. The Bi...... concentration in the samples was found to increase with increasing growth temperature and Bi flux. The position of GaSb1-xBix layer peak in XRD rocking curves is found to be correlated to Bi composition. Surface and structural properties of the samples were also investigated. Samples grown on GaSb and Ga...

  10. Unusual crystallization behavior in Ga-Sb phase change alloys

    Directory of Open Access Journals (Sweden)

    Magali Putero

    2013-12-01

    Full Text Available Combined in situ X-ray scattering techniques using synchrotron radiation were applied to investigate the crystallization behavior of Sb-rich Ga-Sb alloys. Measurements of the sheet resistance during heating indicated a reduced crystallization temperature with increased Sb content, which was confirmed by in situ X-ray diffraction. The electrical contrast increased with increasing Sb content and the resistivities in both the amorphous and crystalline phases decreased. It was found that by tuning the composition between Ga:Sb = 9:91 (in at.% and Ga:Sb = 45:55, the change in mass density upon crystallization changes from an increase in mass density which is typical for most phase change materials to a decrease in mass density. At the composition of Ga:Sb = 30:70, no mass density change is observed which should be very beneficial for phase change random access memory (PCRAM applications where a change in mass density during cycling is assumed to cause void formation and PCRAM device failure.

  11. Bismuth-induced restructuring of the GaSb(110) surface

    DEFF Research Database (Denmark)

    Gemmeren, T. van; Lottermoser, L.; Falkenberg, G.

    1998-01-01

    The structure of the GaSb(110)(1 x 2)-Bi reconstruction has been solved using surface x-ray diffraction, scanning tunneling microscopy, and photoelectron spectroscopy. The ideal GaSb(110) surface is terminated with zigzag chains of anions and cations running in the [1 (1) over bar 0] direction...

  12. Cathodoluminescence study of ytterbium doped GaSb

    International Nuclear Information System (INIS)

    Hidalgo, P.; Mendez, B.; Ruiz, C.; Bermudez, V.; Piqueras, J.; Dieguez, E.

    2005-01-01

    Yb-doped GaSb ingots have been grown by the Bridgman method. The defect structure and compositional homogeneity of the crystals have been investigated by cathodoluminescence and X-ray microanalysis in the scanning electron microscope. The nature of the point defects has been found to depend on the position along the growth axis. Doping with Yb has been found to reduce the luminescence intensity of GaSb and no infrared emission related to intra-ionic transitions of the Yb 3+ ions has been detected

  13. Point defect balance in epitaxial GaSb

    International Nuclear Information System (INIS)

    Segercrantz, N.; Slotte, J.; Makkonen, I.; Kujala, J.; Tuomisto, F.; Song, Y.; Wang, S.

    2014-01-01

    Positron annihilation spectroscopy in both conventional and coincidence Doppler broadening mode is used for studying the effect of growth conditions on the point defect balance in GaSb:Bi epitaxial layers grown by molecular beam epitaxy. Positron annihilation characteristics in GaSb are also calculated using density functional theory and compared to experimental results. We conclude that while the main positron trapping defect in bulk samples is the Ga antisite, the Ga vacancy is the most prominent trap in the samples grown by molecular beam epitaxy. The results suggest that the p–type conductivity is caused by different defects in GaSb grown with different methods.

  14. Molecular beam epitaxial growth and characterization of GaSb layers on GaAs (0 0 1) substrates

    International Nuclear Information System (INIS)

    Li Yanbo; Zhang Yang; Zhang Yuwei; Wang Baoqiang; Zhu Zhanping; Zeng Yiping

    2012-01-01

    We report on the growth of GaSb layers on GaAs (0 0 1) substrates by molecular beam epitaxy (MBE). We investigate the influence of the GaAs substrate surface treatment, growth temperature, and V/III flux ratios on the crystal quality and the surface morphology of GaSb epilayers. Comparing to Ga-rich GaAs surface preparation, the Sb-rich GaAs surface preparation can promote the growth of higher-quality GaSb material. It is found that the crystal quality, electrical properties, and surface morphology of the GaSb epilayers are highly dependent on the growth temperature, and Sb/Ga flux ratios. Under the optimized growth conditions, we demonstrate the epitaxial growth of high quality GaSb layers on GaAs substrates. The p-type nature of the unintentionally doped GaSb is studied and from the growth conditions dependence of the hole concentrations of the GaSb, we deduce that the main native acceptor in the GaSb is the Ga antisite (Ga Sb ) defect.

  15. UIS Baden-Wuerttemberg. AJA project. Application of JAVA-based solutions in environment, transport and administration. Phase II 2001; UIS Baden-Wuerttemberg. Projekt AJA. Anwendung JAVA-basierter Loesungen in den Bereichen Umwelt, Verkehr und Verwaltung. Phase II 2001

    Energy Technology Data Exchange (ETDEWEB)

    Mayer-Foell, R.; Keitel, A.; Geiger, W. (eds.)

    2001-12-01

    Information and communication technology facilitates data acquisition, recording, evaluation and transmission in many fields of society, but even experts tend to get lost in the flood of data that are available. In order to make it possible to integrate new technological developments in information systems, the Minister of Environment and Transportation continues the project AJA (''Application of JAVA-based solutions'') which was started in 2000. AJA is a sequel to the GLOBUS project which was terminated in 1999. (GLOBUS - Globale Umweltsachdaten im UIS Baden-Wuerttemberg und anderen Systemen). [German] Die Bereiche Umwelt, Verkehr und Verwaltung profitieren bei der Erhebung, Erfassung, Auswertung, Darstellung und Weitergabe ihrer Daten in hohem Masse von Informations- und Kommunikationstechnik (IuK). Manche Darstellungsweisen und Berechnungen werden dadurch erst moeglich. Uebergreifende Zusammenhaenge koennen mit Hilfe der IuK aufgezeigt werden. Die Verwaltung muss Technologien einsetzen, wie sie in der Wirtschaft fuer die Zusammenfuehrung von verteilten Unternehmensdaten verwendet werden, um Entscheidungs grundlagen fuer die Unternehmenspolitik zu liefern (z.B. Data Warehouse). In solchen ''Warenhaeusern von Daten'' finden sich oft nur Experten zurecht. Unsere Herausforderung ist es, diese komplexen Zusammenhaenge nicht nur dem Experten, sondern auch dem Buerger auf moeglichst einfache und wirtschaftliche Weise zu vermitteln. Dem Buerger ist der freie Zugang zu Informationen ueber die Umwelt zu ermoeglichen. Wir sind damit auf dem Wege zu einem Marktplatz von Daten und Informationen fuer den Buerger und die Verwaltung. Um neue technologische Entwicklungen in Informationssystemen einsetzen zu koennen, fuehrt das Ministerium fuer Umwelt und Verkehr (UVM) das 2000 begonnene FuE-Vorhaben AJA ''Anwendung JAVA-basierter Loesungen'' fort. AJA baut auf dem 1999 abgeschlossenen Vorhaben GLOBUS (Globale

  16. GASB 35: The New Financial Reporting Requirements for Public College and Universities.

    Science.gov (United States)

    Qayoumi, Mohammad H.

    2001-01-01

    Presents the basic financial reporting elements of the Governmental Accounting Standards Board (GASB-35) for public colleges and universities, including statements of net assets and cash flow reporting. The GASB-35's impact on facilities managers is discussed. (GR)

  17. Artificial intelligence for automotive applications - noise modelling; Kuenstliche Intelligenz fuer Fahrzeuganwendungen - Modellierung des Motorgeraeusches

    Energy Technology Data Exchange (ETDEWEB)

    Suchar, R. [nodes GmbH, Muenchen (Germany)

    2000-12-01

    Reducing the noise level in the interior of vehicles is both a comfort necessity and a challenging technical task. Reliable identification of the accessories responsible for high or low engine-noise levels in the interior of cars classically requires costly, time-consuming, extensive measurement sessions. Artificial intelligence tools efficiently solve the mentioned system-identification problem, and provide a principled way of extracting the information of interest from reduced size databases. (orig.) [German] Kuenstliche neuronale Netze, Fuzzy-Systeme, genetische Algorithmen - vor einem Jahrzehnt haette man gesagt, diese Begriffe stammen aus einem Science-Fiction-Roman. Heute verwenden sie Forscher an Hochschulen und in der Industrie mit dem gemeinsamen Ziel, kuenstliche Intelligenz (KI) in Real-Life-Projekte zu integrieren. Waehrend das Spektrum technischer Applikationen und kommerzieller Produkte sehr weit ist, konzentriert sich der vorliegende Beitrag auf eine spezielle Fahrzeuganwendung, die auf kuenstlichen neuronalen Netzen (KNN) basiert: die Ermittlung der Ausstattungsmerkmale, die fuer hohen Motorgeraeuschpegel im Fahrzeuginneren verantwortlich sind. (orig.)

  18. Assessing Risk with GASB Statement No. 3.

    Science.gov (United States)

    Wood, Venita M.; Scott, Bob

    1987-01-01

    Discusses a Government Accounting Standards Board (GASB) publication designed to provide financial statement users with information to assess a government's actual and future deposit and investment market and credit risk. (MLF)

  19. Compositional and structural characterisation of GaSb and GaInSb

    International Nuclear Information System (INIS)

    Corregidor, V.; Alves, E.; Alves, L.C.; Barradas, N.P.; Duffar, Th.; Franco, N.; Marques, C.; Mitric, A.

    2005-01-01

    Low band gap III-V semiconductors are researched for applications in thermophotovoltaic technology. GaSb crystal is often used as a substrate. Ga 1-x In x Sb is also a promising substrate material, because its lattice parameters can be adjusted by controlling x. We used a new method to synthesise GaSb and GaInSb, in which a high frequency alternate magnetic field is used to heat, to melt and to mix the elements. We present a compositional and structural characterisation of the materials using a combination of complementary techniques. Rutherford backscattering was used to determine accurately the composition of the GaSb. With proton induced X-ray emission in conjunction with a 3 x 3 μm 2 micro-beam we studied the homogeneity of the samples. Structural analysis and phase identification were done with X-ray diffraction. The results for GaSb show a homogeneous composition while the GaInSb samples were found to be strongly heterogeneous at the end of the ingot. The ingots produced are competitive feed material, when compared to other growth techniques, to be used in a second step for the production of good quality ternary crystals

  20. Approaching the Hole Mobility Limit of GaSb Nanowires.

    Science.gov (United States)

    Yang, Zai-xing; Yip, SenPo; Li, Dapan; Han, Ning; Dong, Guofa; Liang, Xiaoguang; Shu, Lei; Hung, Tak Fu; Mo, Xiaoliang; Ho, Johnny C

    2015-09-22

    In recent years, high-mobility GaSb nanowires have received tremendous attention for high-performance p-type transistors; however, due to the difficulty in achieving thin and uniform nanowires (NWs), there is limited report until now addressing their diameter-dependent properties and their hole mobility limit in this important one-dimensional material system, where all these are essential information for the deployment of GaSb NWs in various applications. Here, by employing the newly developed surfactant-assisted chemical vapor deposition, high-quality and uniform GaSb NWs with controllable diameters, spanning from 16 to 70 nm, are successfully prepared, enabling the direct assessment of their growth orientation and hole mobility as a function of diameter while elucidating the role of sulfur surfactant and the interplay between surface and interface energies of NWs on their electrical properties. The sulfur passivation is found to efficiently stabilize the high-energy NW sidewalls of (111) and (311) in order to yield the thin NWs (i.e., 40 nm in diameters) would grow along the most energy-favorable close-packed planes with the orientation of ⟨111⟩, supported by the approximate atomic models. Importantly, through the reliable control of sulfur passivation, growth orientation and surface roughness, GaSb NWs with the peak hole mobility of ∼400 cm(2)V s(-1) for the diameter of 48 nm, approaching the theoretical limit under the hole concentration of ∼2.2 × 10(18) cm(-3), can be achieved for the first time. All these indicate their promising potency for utilizations in different technological domains.

  1. The formation mechanisms and optical characteristics of GaSb quantum rings

    International Nuclear Information System (INIS)

    Lin, Wei-Hsun; Pao, Chun-Wei; Wang, Kai-Wei; Liao, Yu-An; Lin, Shih-Yen

    2013-01-01

    The growth mechanisms and optical characteristics of GaSb quantum rings (QRs) are investigated. Although As-for-Sb exchange is the mechanism responsible for the dot-to-ring transition, significant height difference between GaSb quantum dots (QDs) and QRs in a dot/ring mixture sample suggests that the dot-to-ring transition is not a spontaneous procedure. Instead, it is a rapid transition procedure as long as it initiates. A model is established to explain this phenomenon. Larger ring inner diameters and heights of the sample with longer post Sb soaking time suggest that As-for-Sb exchange takes places in both vertical and lateral directions. The decreasing ring densities, enlarged ring inner/outer diameters and eventually flat GaSb surfaces observed with increasing growth temperatures are resulted from enhanced adatom migration and As-for-Sb exchange with increasing growth temperatures

  2. Performance evaluation of thermophotovoltaic GaSb cell technology in high temperature waste heat

    Science.gov (United States)

    Utlu, Z.; Önal, B. S.

    2018-02-01

    In this study, waste heat was evaluated and examined by means of thermophotovoltaic systems with the application of energy production potential GaSb cells. The aim of our study is to examine GaSb cell technology at high temperature waste heat. The evaluation of the waste heat to be used in the system is designed to be used in the electricity, industry and iron and steel industry. Our work is research. Graphic analysis is done with Matlab program. The high temperature waste heat graphs applied on the GaSb cell are in the results section. Our study aims to provide a source for future studies.

  3. Ein PKI-basiertes Protokoll für sichere und praktikable Onlinewahlen

    Directory of Open Access Journals (Sweden)

    Lucie Langer

    2010-04-01

    Full Text Available Wir stellen ein Protokoll für Onlinewahlen vor, welches auf dem Schema von Ohkubo et al. [13] basiert. Besonders an diesem Protokoll ist, dass der Auszähler nicht vertrauenswürdig sein muss. Der geheime Schlüssel des Auszählers wird am Ende der Wahl veröffentlicht und ermöglicht so die universelle Verifizierbarkeit der Stimmauszählung. Wir diskutieren die Sicherheit des Protokolls angesichts der allgemein anerkannten Sicherheitsanforderungen für elektronische Wahlschemata.

  4. Low temperature Zn diffusion for GaSb solar cell structures fabrication

    Science.gov (United States)

    Sulima, Oleg V.; Faleev, Nikolai N.; Kazantsev, Andrej B.; Mintairov, Alexander M.; Namazov, Ali

    1995-01-01

    Low temperature Zn diffusion in GaSb, where the minimum temperature was 450 C, was studied. The pseudo-closed box (PCB) method was used for Zn diffusion into GaAs, AlGaAs, InP, InGaAs and InGaAsP. The PCB method avoids the inconvenience of sealed ampoules and proved to be simple and reproducible. The special design of the boat for Zn diffusion ensured the uniformality of Zn vapor pressure across the wafer surface, and thus the uniformity of the p-GaSb layer depth. The p-GaSb layers were studied using Raman scattering spectroscopy and the x-ray rocking curve method. As for the postdiffusion processing, an anodic oxidation was used for a precise thinning of the diffused GaSb layers. The results show the applicability of the PCB method for the large-scale production of the GaSb structures for solar cells.

  5. Consistency endangered by FASB-GASB (Financial Accounting Standards Board, Government Accounting Standards Board ) dispute.

    Science.gov (United States)

    Garner, M; Grossman, W

    1991-02-01

    The Financial Accounting Foundation's (FAF's) November 1989 decision to uphold the 1984 jurisdictional arrangement between the Financial Accounting Standards Board (FASB) and the Government Accounting Standards Board (GASB) leaves little doubt that the healthcare industry will now be subject to two sets of accounting standards. The FAF's decision created a distinction between the accounting practices of government-owned hospitals and non-hospital governmental entities and their adherence to standards set by FASB, GASB, and the American Institute of Certified Public Accountants. A governmental healthcare organization should carefully determine which accounting rules it follows and remain attentive to further GASB developments.

  6. Chemical and electrical properties of (NH4)2S passivated GaSb surface

    International Nuclear Information System (INIS)

    Tao Dongyan; Cheng Yu; Liu Jingming; Su Jie; Liu Tong; Yang Fengyun; Wang Fenghua; Cao Kewei; Dong Zhiyuan; Zhao Youwen

    2015-01-01

    The surface chemical properties of gallium antimonide (GaSb) after ammonium sulfide ((NH 4 ) 2 S) solution passivation have been studied by X-ray photoelectron spectroscopy (XPS), time of flight secondary ion mass spectroscopy (TOF-SIMS) and I–V measurement. An advantage of neutral (NH 4 ) 2 S + S solution over pure (NH 4 ) 2 S solution and alkaline (NH 4 ) 2 S + S solution has been found in the ability to passivate the GaSb surface by contrast and comparison. It has been found that alkaline (NH 4 ) 2 S + S solution passivation effectively removes oxides of the GaSb surface and forms sulfide products to improve device performance. TOF-SIMS complementally demonstrates that pure (NH 4 ) 2 S passivation did form sulfide products, which are too soluble to really exist. The lowest roughness determined using a 3D optical profilometer and the highest improved SBD quality proved that neutral (NH 4 ) 2 S + S solution passivation worked much better in improving the surface properties of GaSb. (paper)

  7. Structural Characterization of Doped GaSb Single Crystals by X-ray Topography

    Energy Technology Data Exchange (ETDEWEB)

    Honnicke, M.G.; Mazzaro, I.; Manica, J.; Benine, E.; M da Costa, E.; Dedavid, B. A.; Cusatis, C.; Huang, X. R.

    2009-09-13

    We characterized GaSb single crystals containing different dopants (Al, Cd and Te), grown by the Czochralski method, by x-ray topography and high angular resolution x-ray diffraction. Lang topography revealed dislocations parallel and perpendicular to the crystal's surface. Double-crystal GaSb 333 x-ray topography shows dislocations and vertical stripes than can be associated with circular growth bands. We compared our high-angular resolution x-ray diffraction measurements (rocking curves) with the findings predicted by the dynamical theory of x-ray diffraction. These measurements show that our GaSb single crystals have a relative variation in the lattice parameter ({Delta}d/d) on the order of 10{sup -5}. This means that they can be used as electronic devices (detectors, for example) and as x-ray monochromators.

  8. Examination of thermophotovoltaic GaSb cell technology in low and medium temperatures waste heat

    Science.gov (United States)

    Utlu, Z.; Önal, B. S.

    2018-02-01

    In this study, waste heat was evaluated and examined by means of thermophotovoltaic systems with the application of energy production potential GaSb cells. The aim of our study is to examine GaSb cell technology at low and medium temperature waste heat. The evaluation of the waste heat to be used in the system is designed to be used in the electricity, industry and iron and steel industry. Our work is research. Graphic analysis is done with Matlab program. The low and medium temperature waste heat graphs applied on the GaSb cell are in the results section. Our study aims to provide a source for future studies.

  9. Impact of process temperature on GaSb metal-oxide-semiconductor interface properties fabricated by ex-situ process

    Energy Technology Data Exchange (ETDEWEB)

    Yokoyama, Masafumi, E-mail: yokoyama@mosfet.t.u-tokyo.ac.jp; Takenaka, Mitsuru; Takagi, Shinichi [Department of Electrical Engineering and Information Systems, The University of Tokyo, Yayoi 2-11-16, Bunkyo, Tokyo 113-0032 (Japan); JST-CREST, Yayoi 2-11-16, Bunkyo, Tokyo 113-0032 (Japan); Asakura, Yuji [Department of Electrical Engineering and Information Systems, The University of Tokyo, Yayoi 2-11-16, Bunkyo, Tokyo 113-0032 (Japan); Yokoyama, Haruki [NTT Photonics Laboratories, NTT Corporation, Atsugi 243-0198 (Japan)

    2014-06-30

    We have studied the impact of process temperature on interface properties of GaSb metal-oxide-semiconductor (MOS) structures fabricated by an ex-situ atomic-layer-deposition (ALD) process. We have found that the ALD temperature strongly affects the Al{sub 2}O{sub 3}/GaSb MOS interface properties. The Al{sub 2}O{sub 3}/GaSb MOS interfaces fabricated at the low ALD temperature of 150 °C have the minimum interface-trap density (D{sub it}) of ∼4.5 × 10{sup 13 }cm{sup −2} eV{sup −1}. We have also found that the post-metalization annealing at temperature higher than 200 °C degrades the Al{sub 2}O{sub 3}/GaSb MOS interface properties. The low-temperature process is preferable in fabricating GaSb MOS interfaces in the ex-situ ALD process to avoid the high-temperature-induced degradations.

  10. The effects of electron and proton radiation on GaSb infrared solar cells

    Science.gov (United States)

    Gruenbaum, P. E.; Avery, J. E.; Fraas, L. M.

    1991-01-01

    Gallium antimonide (GaSb) infrared solar cells were exposed to 1 MeV electrons and protons up to fluences of 1 times 10(exp 15) cm (-2) and 1 times 10(exp 12) cm (-2) respectively. In between exposures, current voltage and spectral response curves were taken. The GaSb cells were found to degrade slightly less than typical GaAs cells under electron irradiation, and calculations from spectral response curves showed that the damage coefficient for the minority carrier diffusion length was 3.5 times 10(exp 8). The cells degraded faster than GaAs cells under proton irradiation. However, researchers expect the top cell and coverglass to protect the GaSb cell from most damaging protons. Some annealing of proton damage was observed at low temperatures (80 to 160 C).

  11. Preclinical and first clinical experience with the gastrin-releasing peptide receptor-antagonist [68Ga]SB3 and PET/CT

    International Nuclear Information System (INIS)

    Maina, Theodosia; Charalambidis, David; Nock, Berthold A.; Bergsma, Hendrik; Krenning, Eric P.; Kulkarni, Harshad R.; Mueller, Dirk; Baum, Richard P.; Jong, Marion de

    2016-01-01

    Gastrin-releasing peptide receptors (GRPR) represent attractive targets for tumor diagnosis and therapy because of their overexpression in major human cancers. Internalizing GRPR agonists were initially proposed for prolonged lesion retention, but a shift of paradigm to GRPR antagonists has recently been made. Surprisingly, radioantagonists, such as [ 99m Tc]DB1 ( 99m Tc-N 4 '-DPhe 6 ,Leu-NHEt 13 BBN(6-13)), displayed better pharmacokinetics than radioagonists, in addition to their higher inherent biosafety. We introduce here [ 68 Ga]SB3, a [ 99m Tc]DB1 mimic-carrying, instead of the 99m Tc-binding tetraamine, the chelator DOTA for labeling with the PET radiometal 68 Ga. Competition binding assays of SB3 and [ nat Ga]SB3 were conducted against [ 125 I-Tyr 4 ]BBN in PC-3 cell membranes. Blood samples collected 5 min postinjection (pi) of the [ 67 Ga]SB3 surrogate in mice were analyzed using high-performance liquid chromatography (HPLC) for degradation products. Likewise, biodistribution was performed after injection of [ 67 Ga]SB3 (37 kBq, 100 μL, 10 pmol peptide) in severe combined immunodeficiency (SCID) mice bearing PC-3 xenografts. Eventually, [ 68 Ga]SB3 (283 ± 91 MBq, 23 ± 7 nmol) was injected into 17 patients with breast (8) and prostate (9) cancer. All patients had disseminated disease and had received previous therapies. PET/CT fusion images were acquired 60-115 min pi. SB3 and [ nat Ga]SB3 bound to the human GRPR with high affinity (IC 50 : 4.6 ± 0.5 nM and 1.5 ± 0.3 nM, respectively). [ 67 Ga]SB3 displayed good in vivo stability (>85 % intact at 5 min pi). [ 67 Ga]SB3 showed high, GRPR-specific and prolonged retention in PC-3 xenografts (33.1 ± 3.9%ID/g at 1 h pi - 27.0 ± 0.9%ID/g at 24 h pi), but much faster clearance from the GRPR-rich pancreas (∼160%ID/g at 1 h pi to <17%ID/g at 24 h pi) in mice. In patients, [ 68 Ga]SB3 elicited no adverse effects and clearly visualized cancer lesions. Thus, 4 out of 8 (50 %) breast cancer and 5 out of 9

  12. Nanosecond pulsed laser induced self-organized nano-dots patterns on GaSb surface

    Energy Technology Data Exchange (ETDEWEB)

    Yoshida, Yutaka, E-mail: yyoshida@cris.hokudai.ac.jp [Center for Advanced Research of Energy and Materials, Faculty of Engineering, Hokkaido University, N8, W13, Kita-ku, Sapporo 060-8628, Hokkaido (Japan); Creative Research Institution Sousei, Hokkaido University, N21, W10, Kita-ku, Sapporo 001-0021, Hokkaido (Japan); Oosawa, Kazuya; Wajima, Jyunya; Watanabe, Seiichi [Center for Advanced Research of Energy and Materials, Faculty of Engineering, Hokkaido University, N8, W13, Kita-ku, Sapporo 060-8628, Hokkaido (Japan); Matsuo, Yasutaka [Research Institute for Electronic Science, Hokkaido University, Sapporo 001-0020, Hokkaido (Japan); Kato, Takahiko [Hitachi Research Laboratory, Hitachi, Ltd., 7-1-1 Omika, Hitachi-shi 319-1292, Ibaraki-ken (Japan); Center for Advanced Research of Energy and Materials, Faculty of Engineering, Hokkaido University, N8, W13, Kita-ku, Sapporo 060-8628, Hokkaido (Japan)

    2014-07-01

    We report a technique for formation of two-dimensional (2D) nanodot (ND) patterns on gaillium antimoide (GaSb) using a nanosecond pulsed laser irradiation with 532 nm wavelength. The patterns have formed because of the interference and the self-organization under energy deposition of the laser irradiation, which induced the growth of NDs on the local area. The NDs are grown and shrunken in the pattern by energy depositions. In the laser irradiation with average laser energy density of 35 mJ cm⁻², large and small NDs are formed on GaSb surface. The large NDs have grown average diameter from 160 to 200 nm with increase of laser pulses, and the small NDs have shrunken average diameter from 75 to 30 nm. The critical dot size is required about 107 nm for growth of the NDs in the patterns. Nanosecond pulsed laser irradiation can control the self-organized ND size on GaSb in air as a function of the laser pulses.

  13. GPU-basierte Smart Visibility Techniken für die Planung von Tumor-Operationen

    Science.gov (United States)

    Tietjen, Christian; Kubisch, Christoph; Hiller, Stefan; Preim, Bernhard

    Bei der Planung von Tumoroperationen ist die Einschätzung von Abständen und Infiltrationen zu vitalen Strukturen wichtig. Im Bereich der medizinischen Visualisierung wurden hierfür bereits zahlreiche Techniken entwickelt, die unter dem Begriff Smart Visibility zusammengefasst werden. Zu diesen zählen Ghost Views und Section Views. In diesem Beitrag wird eine GPU-basierte Realisierung dieser Techniken für polygonale Daten vorgestellt. Die Parametrisierung der Techniken erfolgt automatisch, um einen klinischen Einsatz ermöglichen zu können.

  14. Epitaxial growth of GaSb on V-grooved Si (001) substrates with an ultrathin GaAs stress relaxing layer

    Science.gov (United States)

    Li, Qiang; Lai, Billy; Lau, Kei May

    2017-10-01

    We report epitaxial growth of GaSb nano-ridge structures and planar thin films on V-groove patterned Si (001) substrates by leveraging the aspect ratio trapping technique. GaSb was deposited on {111} Si facets of the V-shaped trenches using metal-organic chemical vapor deposition with a 7 nm GaAs growth initiation layer. Transmission electron microscopy analysis reveals the critical role of the GaAs layer in providing a U-shaped surface for subsequent GaSb epitaxy. A network of misfit dislocations was uncovered at the GaSb/GaAs hetero-interface. We studied the evolution of the lattice relaxation as the growth progresses from closely pitched GaSb ridges to coalesced thin films using x-ray diffraction. The omega rocking curve full-width-at-half-maximum of the resultant GaSb thin film is among the lowest values reported by molecular beam epitaxy, substantiating the effectiveness of the defect necking mechanism. These results thus present promising opportunities for the heterogeneous integration of devices based on 6.1 Å family compound semiconductors.

  15. Study of the Local Environment of Mn Ions Implanted in GaSb

    International Nuclear Information System (INIS)

    Wolska, A.; Lawniczak-Jablonska, K.; Klepka, M.T.; Barcz, A.; Hallen, A.; Arvanitis, D.

    2010-01-01

    The first attempts to establish an implantation process leading to formation of ferromagnetic inclusions inside the GaSb matrix are presented. Gallium antimonide containing ferromagnetic MnSb precipitations is considered as a promising material for novel spintronic applications. It is possible to obtain such inclusions during the molecular beam epitaxy (MBE) growth. However, for commercial application it would be also important to find an optimal way of producing this kind of inclusions by Mn ions implantation. In order to achieve this goal, several parameters of implantation and post annealing procedures were tested. The ion energy was kept at 10 keV or 150 keV and four different ion doses were applied, as well as various annealing conditions. The analysis of X-ray absorption spectra allowed to estimate the local atomic order around Mn atoms. Depending on the implantation energy and annealing processes, the manganese oxides or manganese atoms located in a heavily defected GaSb matrix were observed. The performed analysis helped in indicating the main obstacles in formation of MnSb inclusions inside the GaSb matrix by Mn ion implantation. (author)

  16. Isolating GaSb Membranes Grown Metamorphically on GaAs Substrates Using Highly Selective Substrate Removal Etch Processes

    Science.gov (United States)

    Renteria, E. J.; Muniz, A. J.; Addamane, S. J.; Shima, D. M.; Hains, C. P.; Balakrishnan, G.

    2015-05-01

    The etch rates of NH4OH:H2O2 and C6H8O7:H2O2 for GaAs and GaSb have been investigated to develop a selective etch for GaAs substrates and to isolate GaSb epilayers grown on GaAs. The NH4OH:H2O2 solution has a greater etch rate differential for the GaSb/GaAs material system than C6H8O7:H2O2 solution. The selectivity of NH4OH:H2O2 for GaAs/GaSb under optimized etch conditions has been observed to be as high as 11,000 ± 2000, whereas that of C6H8O7:H2O2 has been measured up to 143 ± 2. The etch contrast has been verified by isolating 2- μm-thick GaSb epilayers that were grown on GaAs substrates. GaSb membranes were tested and characterized with high- resolution x-ray diffraction and atomic force microscopy.

  17. Formation, atomic structure, and electronic properties of GaSb quantum dots in GaAs

    Energy Technology Data Exchange (ETDEWEB)

    Timm, R.

    2007-12-14

    In this work, cross-sectional scanning tunneling microscopy and spectroscopy are used for the first time to study the shape, size, strain, chemical composition, and electronic properties of capped GaSb/GaAs QDs at the atomic scale. By evaluating such structural results on a variety of nanostructures built using different epitaxy methods and growth conditions, details on the underlying QD formation processes can be revealed. A cross-over from flat quantum wells (QWs) to optically active QDs can be observed in samples grown by metalorganic chemical vapor deposition (MOCVD) with increasing amount of GaSb, including self-assembled Sb accumulations within a still two-dimensional layer and tiny three-dimensional GaSb islands probably acting as precursor structures. The QWs consist of significantly intermixed material with stoichiometries of maximally 50% GaSb, additionally exhibiting small gaps filled with GaAs. A higher GaSb content up to nearly pure material is found in the QDs, being characterized by small sizes of up to 8 nm baselength and about 2 nm height. In spite of the intermixing, all nanostructures have rather abrupt interfaces, and no significant Sb segregation in growth direction is observed. This changes completely when molecular beam epitaxy (MBE) is used as growth method, in which case individual Sb atoms are found to be distributed over several nm above the nanostructures. Massive group-V atomic exchange processes are causing this strong inter-mixing and Sb segregation during GaAs overgrowth. In combination with the large strain inherent to GaSb/GaAs QDs, this segregation upon overgrowth is assumed to be the reason for a unique structural phenomenon: All MBE-grown QDs, independent of the amount of deposited GaSb, exhibit a ring structure, consisting of a ring body of high GaSb content and a more or less extended central gap filled with GaAs. These rings have formed in a self-assembled way even when the initial GaSb layer was overgrown considerably fast

  18. Tips for School Districts: GASB's New Fund Balance Standards

    Science.gov (United States)

    Mead, Dean Michael

    2010-01-01

    In March 2009, the Governmental Accounting Standards Board (GASB) issued Statement No. 54, "Fund Balance Reporting and Governmental Fund Type Definitions." School districts that prepare financial reports based on generally accepted accounting principles are required to implement this standard no later than the first fiscal year that starts after…

  19. Antisites and anisotropic diffusion in GaAs and GaSb

    KAUST Repository

    Tahini, H. A.; Bracht, H.; Chroneos, Alexander; Grimes, R. W.; Murphy, S. T.; Schwingenschlö gl, Udo

    2013-01-01

    The significant diffusion of Ga under Ga-rich conditions in GaAs and GaSb is counter intuitive as the concentration of Ga vacancies should be depressed although Ga vacancies are necessary to interpret the experimental evidence for Ga transport

  20. Beryllium implant activation and damage recovery study in n-type GaSb

    Science.gov (United States)

    Rahimi, N.; Behzadirad, M.; Renteria, Emma J.; Shima, D. M.; Muniz, Ayse J.; Busani, T.; Lavrova, Olga; Balakrishnan, G.; Lester, L. F.

    2014-03-01

    Damage induced by the implantation of beryllium in n-type GaSb and its removal by Rapid Thermal Annealing (RTA) are studied in detail by Atomic Force Microscopy (AFM), Cross Sectional Transmission Electron Microscopy (XTEM) and Energy Dispersive X-ray Spectroscopy (EDS). RTA has been implemented with different times and temperatures in order to optimize ion activation and to avoid Sb outdiffusion during the process. Results indicate a lattice quality that is close to pristine GaSb for samples annealed at 600 °C for 10s using a thick Si3N4 capping layer. Electrical response of the implanted diodes is measured and characterized as function of different annealing conditions.

  1. Preclinical and first clinical experience with the gastrin-releasing peptide receptor-antagonist [{sup 68}Ga]SB3 and PET/CT

    Energy Technology Data Exchange (ETDEWEB)

    Maina, Theodosia; Charalambidis, David; Nock, Berthold A. [INRASTES, NCSR ' ' Demokritos' ' , Molecular Radiopharmacy, Athens (Greece); Bergsma, Hendrik; Krenning, Eric P. [Erasmus MC, Department of Nuclear Medicine, Rotterdam (Netherlands); Kulkarni, Harshad R.; Mueller, Dirk; Baum, Richard P. [Zentralklinik, Molecular Radiotherapy and Molecular Imaging, Bad Berka (Germany); Jong, Marion de [Erasmus MC, Department of Nuclear Medicine, Rotterdam (Netherlands); Erasmus MC, Department of Radiology, Rotterdam (Netherlands)

    2016-05-15

    Gastrin-releasing peptide receptors (GRPR) represent attractive targets for tumor diagnosis and therapy because of their overexpression in major human cancers. Internalizing GRPR agonists were initially proposed for prolonged lesion retention, but a shift of paradigm to GRPR antagonists has recently been made. Surprisingly, radioantagonists, such as [{sup 99m}Tc]DB1 ({sup 99m}Tc-N{sub 4}'-DPhe{sup 6},Leu-NHEt{sup 13}BBN(6-13)), displayed better pharmacokinetics than radioagonists, in addition to their higher inherent biosafety. We introduce here [{sup 68}Ga]SB3, a [{sup 99m}Tc]DB1 mimic-carrying, instead of the {sup 99m}Tc-binding tetraamine, the chelator DOTA for labeling with the PET radiometal {sup 68}Ga. Competition binding assays of SB3 and [{sup nat}Ga]SB3 were conducted against [{sup 125}I-Tyr{sup 4}]BBN in PC-3 cell membranes. Blood samples collected 5 min postinjection (pi) of the [{sup 67}Ga]SB3 surrogate in mice were analyzed using high-performance liquid chromatography (HPLC) for degradation products. Likewise, biodistribution was performed after injection of [{sup 67}Ga]SB3 (37 kBq, 100 μL, 10 pmol peptide) in severe combined immunodeficiency (SCID) mice bearing PC-3 xenografts. Eventually, [{sup 68}Ga]SB3 (283 ± 91 MBq, 23 ± 7 nmol) was injected into 17 patients with breast (8) and prostate (9) cancer. All patients had disseminated disease and had received previous therapies. PET/CT fusion images were acquired 60-115 min pi. SB3 and [{sup nat}Ga]SB3 bound to the human GRPR with high affinity (IC{sub 50}: 4.6 ± 0.5 nM and 1.5 ± 0.3 nM, respectively). [{sup 67}Ga]SB3 displayed good in vivo stability (>85 % intact at 5 min pi). [{sup 67}Ga]SB3 showed high, GRPR-specific and prolonged retention in PC-3 xenografts (33.1 ± 3.9%ID/g at 1 h pi - 27.0 ± 0.9%ID/g at 24 h pi), but much faster clearance from the GRPR-rich pancreas (∼160%ID/g at 1 h pi to <17%ID/g at 24 h pi) in mice. In patients, [{sup 68}Ga]SB3 elicited no adverse effects and

  2. Nature of metastable amorphous-to-crystalline reversible phase transformations in GaSb

    Energy Technology Data Exchange (ETDEWEB)

    Kalkan, B. [Advanced Light Source, Lawrence Berkeley Laboratory, Berkeley, California 20015 (United States); Edwards, T. G.; Sen, S. [Department of Chemical Engineering and Materials Science, University of California, Davis, California 95616 (United States); Raoux, S. [IBM T. J. Watson Research Center, Yorktown Heights, New York 10598 (United States)

    2013-08-28

    The structural, thermodynamic, and kinetic aspects of the transformations between the metastable amorphous and crystalline phases of GaSb are investigated as a function of pressure at ambient temperature using synchrotron x-ray diffraction experiments in a diamond anvil cell. The results are consistent with the hypothesis that the pressure induced crystallization of amorphous GaSb into the β-Sn crystal structure near ∼5 GPa is possibly a manifestation of an underlying polyamorphic phase transition between a semiconducting, low density and a metallic, high density amorphous (LDA and HDA, respectively) phases. In this scenario, the large differences in the thermal crystallization kinetics between amorphous GaSb deposited in thin film form by sputtering and that prepared by laser melt quenching may be related to the relative location of the glass transition temperature of the latter in the pressure-temperature (P-T) space with respect to the location of the critical point that terminate the LDA ↔ HDA transition. The amorphous →β-Sn phase transition is found to be hysteretically reversible as the β-Sn phase undergoes decompressive amorphization near ∼2 GPa due to the lattice instabilities that give rise to density fluctuations in the crystal upon decompression.

  3. Nature of metastable amorphous-to-crystalline reversible phase transformations in GaSb

    Science.gov (United States)

    Kalkan, B.; Edwards, T. G.; Raoux, S.; Sen, S.

    2013-08-01

    The structural, thermodynamic, and kinetic aspects of the transformations between the metastable amorphous and crystalline phases of GaSb are investigated as a function of pressure at ambient temperature using synchrotron x-ray diffraction experiments in a diamond anvil cell. The results are consistent with the hypothesis that the pressure induced crystallization of amorphous GaSb into the β-Sn crystal structure near ˜5 GPa is possibly a manifestation of an underlying polyamorphic phase transition between a semiconducting, low density and a metallic, high density amorphous (LDA and HDA, respectively) phases. In this scenario, the large differences in the thermal crystallization kinetics between amorphous GaSb deposited in thin film form by sputtering and that prepared by laser melt quenching may be related to the relative location of the glass transition temperature of the latter in the pressure-temperature (P-T) space with respect to the location of the critical point that terminate the LDA ↔ HDA transition. The amorphous → β-Sn phase transition is found to be hysteretically reversible as the β-Sn phase undergoes decompressive amorphization near ˜2 GPa due to the lattice instabilities that give rise to density fluctuations in the crystal upon decompression.

  4. Nature of metastable amorphous-to-crystalline reversible phase transformations in GaSb

    International Nuclear Information System (INIS)

    Kalkan, B.; Edwards, T. G.; Sen, S.; Raoux, S.

    2013-01-01

    The structural, thermodynamic, and kinetic aspects of the transformations between the metastable amorphous and crystalline phases of GaSb are investigated as a function of pressure at ambient temperature using synchrotron x-ray diffraction experiments in a diamond anvil cell. The results are consistent with the hypothesis that the pressure induced crystallization of amorphous GaSb into the β-Sn crystal structure near ∼5 GPa is possibly a manifestation of an underlying polyamorphic phase transition between a semiconducting, low density and a metallic, high density amorphous (LDA and HDA, respectively) phases. In this scenario, the large differences in the thermal crystallization kinetics between amorphous GaSb deposited in thin film form by sputtering and that prepared by laser melt quenching may be related to the relative location of the glass transition temperature of the latter in the pressure-temperature (P-T) space with respect to the location of the critical point that terminate the LDA ↔ HDA transition. The amorphous →β-Sn phase transition is found to be hysteretically reversible as the β-Sn phase undergoes decompressive amorphization near ∼2 GPa due to the lattice instabilities that give rise to density fluctuations in the crystal upon decompression

  5. GASB's New Financial Reporting Model: Implementation Project for School Districts.

    Science.gov (United States)

    Bean, David; Glick, Paul

    1999-01-01

    In June 1999, the Governmental Accounting Standards Board (GASB) issued its statement on the structure of the basic financial reporting model for state and local governments. Explains the new financial reporting model and reviews the implementation issues that school districts will need to address. (MLF)

  6. The electronic structures and ferromagnetism of Fe-doped GaSb: The first-principle calculation study

    Science.gov (United States)

    Lin, Xue-ling; Niu, Cao-ping; Pan, Feng-chun; Chen, Huan-ming; Wang, Xu-ming

    2017-09-01

    The electronic structures and the magnetic properties of Fe doped GaSb have been investigated by the first-principles calculation based on the framework of the generalized gradient approximation (GGA) and GGA+U schemes. The calculated results indicated that Fe atoms tend to form the anti-ferromagnetic (AFM) coupling with the nearest-neighbor positions preferentially. Compared with the anti-ferromagnetic coupling, the ferromagnetic interactions occurred at the second nearest-neighbor and third nearest-neighbor sites have a bigger superiority energetically. The effect of strong electron correlation at Fe-d orbit taking on the magnetic properties predicted by GGA+U approach demonstrated that the ferromagnetic (FM) coupling between the Fe ions is even stronger in consideration of the strong electron correlation effect. The ferromagnetism in Fe doped GaSb system predicted by our investigation implied that the doping of Fe into GaSb can be as a vital routine for manufacturing the FM semiconductors with higher Curie temperature.

  7. Integration of atomic layer deposited high-k dielectrics on GaSb via hydrogen plasma exposure

    Directory of Open Access Journals (Sweden)

    Laura B. Ruppalt

    2014-12-01

    Full Text Available In this letter we report the efficacy of a hydrogen plasma pretreatment for integrating atomic layer deposited (ALD high-k dielectric stacks with device-quality p-type GaSb(001 epitaxial layers. Molecular beam eptiaxy-grown GaSb surfaces were subjected to a 30 minute H2/Ar plasma treatment and subsequently removed to air. High-k HfO2 and Al2O3/HfO2 bilayer insulating films were then deposited via ALD and samples were processed into standard metal-oxide-semiconductor (MOS capacitors. The quality of the semiconductor/dielectric interface was probed by current-voltage and variable-frequency admittance measurements. Measurement results indicate that the H2-plamsa pretreatment leads to a low density of interface states nearly independent of the deposited dielectric material, suggesting that pre-deposition H2-plasma exposure, coupled with ALD of high-k dielectrics, may provide an effective means for achieving high-quality GaSb MOS structures for advanced Sb-based digital and analog electronics.

  8. Target tailoring and proton beam therapy to reduce small bowel dose in cervical cancer radiotherapy. A comparison of benefits

    Energy Technology Data Exchange (ETDEWEB)

    Boer, Peter de; Westerveld, Henrike; Smit, Mark; Bel, Arjan; Rasch, Coen R.N.; Stalpers, Lukas J.A. [Academic Medical Center, University of Amsterdam, Department of Radiation Oncology, Amsterdam (Netherlands); Schoot, Agustinus J.A.J. van de [The Netherlands Cancer Institute - Antoni van Leeuwenhoek, Department of Radiation Oncology, Amsterdam (Netherlands); Buist, Marrije R. [Academic Medical Center, University of Amsterdam, Department of Gynaecology and Obstetrics, Amsterdam (Netherlands)

    2018-03-15

    '' (IGART) und einer verbesserten Dosiskonformitaet durch die intensitaetsmodulierte Protonentherapie (IMPT) untersucht. Die Studie umfasste Planungscomputertomographien von 11 zuvor behandelten Zervixkarzinompatientinnen, die in der Magnetresonanztomographie (MRT) einen >4 cm grossen tumorfreien proximalen Uterusanteil aufwiesen. Es wurden IGART- und robust optimierte IMPT-Plaene fuer herkoemmliche Zielvolumina mit Erfassung des gesamten Uterus sowie MRT-basierte Zielvolumina unter Ausschluss des tumorfreien proximalen Uterusanteils erstellt. Daraus ergaben sich pro Patientin 4 Behandlungsplaene. Fuer jeden Plan wurden V{sub 15Gy}, V{sub 30Gy}, V{sub 45Gy} und D{sub mean} fuer Harnblase, Sigmoid, Rektum und das Duenndarmkompartiment verglichen und die Komplikationswahrscheinlichkeit des Normalgewebes (NTCP) fuer Duenndarmakuttoxizitaeten ≥Grad 2 berechnet. Sowohl die IMPT als auch die MRT-basierte Zielvolumenpraezisierung fuehrte zu einer signifikanten Reduktion von V{sub 15Gy}, V{sub 30Gy}, V{sub 45Gy} und D{sub mean} fuer Harnblase und Duenndarm. Die IMPT reduzierte die NTCP fuer Duenndarmtoxizitaet (≥Grad 2) von 25 auf 18 %. Diese liess sich durch eine MRT-basierte Zielvolumenreduktion weiter auf 9 % vermindern. Eine NTCP-Reduktion von >10 % wurde durch IMPT bei 4 von 11 Patientinnen (36 %) und durch die Kombination von IMPT und MRT-basierter Zielvolumenpraezisierung bei 6 von 11 Patientinnen (55 %) erreicht. Diese mehr als 10 %ige NTCP-Reduktion war zu erzielen, wenn die V{sub 45Gy} fuer das Darmkompartiment bei der Standardzielvolumendefinition >275 cm{sup 3} und bei der MRT-basierten Zielvolumendefinition >200 cm{sup 3} betrug. Bei Zervixkarzinompatientinnen fuehren sowohl die IMPT als auch MRT-basierte Zielvolumenpraezisierungen unter Ausschluss der tumorfreien Uterusanteile zu einer signifikanten Dosisreduktion bei umliegenden Risikoorganen und im NTCP-Modell zu einer Verminderung der Duenndarmtoxizitaet. (orig.)

  9. Cubic boron nitride coatings for innovative applications; Schichten aus kubischem Bornitrid (cBN) fuer innovative Anwendungen

    Energy Technology Data Exchange (ETDEWEB)

    Keunecke, M.; Bewilogua, K. [Fraunhofer Inst. fuer Schicht- und Oberflaechentechnik (Germany)

    2001-08-01

    Coatings of cubic boron nitride (cBN), the second hardest of all known materials, were prepared using a sputter process. A new coating design, based on a special B-C-N layer system, allows to deposit thick (> 2 {mu}m) cBN films, however so far only on silicon substrates. The properties of the coatings are quite similar to those of bulk cBN. Promising experiments were performed with respect to a transfer of this application relevant layer system to cemented carbide and steel substrates. First measurements of the mechanical and tribological properties confirmed the outstanding properties and the high potential of such cBN based coating systems. (orig.) [German] Schichten aus kubischem Bornitrid (cBN), dem nach Diamant zweithaertesten aller bekannten Materialien, wurden mit einem Sputter-Prozess hergestellt. Ein neuartiger Schichtaufbau, der auf einem speziellen B-C-N-Schichtsystem basiert, ermoeglicht die Abscheidung von cBN-Schichten mit ueber 2 {mu}m Dicke, allerdings bisher nur auf Siliciumsubstraten. Die Eigenschaften der Schichten sind denen von massivem cBN sehr aehnlich. Es wurden vielversprechende Experimente zur Uebertragung dieses fuer Werkzeugbeschichtungen und vielfaeltige andere Anwendungen interessanten Schichtsystems auf Werkzeugsubstrate durchgefuehrt. Erste Untersuchungen der mechanisch-tribologischen Eigenschaften der auf Hartmetall- und Stahlsubstraten abgeschiedenen Schichten belegen das aussergewoehnlich hohe Potential der cBN-basierten Schichtsysteme. (orig.)

  10. Optimization of growth parameters for MOVPE-grown GaSb and Ga1−xInxSb

    International Nuclear Information System (INIS)

    Miya, S.S.; Wagener, V.; Botha, J.R.

    2012-01-01

    The triethylgallium/trimethylantimony (TEGa/TMSb) precursor combination was used for the metal-organic vapour phase epitaxial growth of GaSb at a growth temperature of 520 °C at atmospheric pressure. Trimethylindium was added in the case of Ga 1−x In x Sb growth. The effects of group V flux to group III flux ratio (V/III ratio) on the crystallinity and optical properties of GaSb layers are reported. It has been observed from the crystalline quality and optical properties that nominal V/III ratios of values greater than unity are required for GaSb epitaxial layers grown at this temperature. It has also been shown that Ga 1−x In x Sb can be grown using TEGa as a source of gallium species at atmospheric pressure. The relationship between Ga 1−x In x Sb vapour composition and solid composition has been studied at a V/III ratio of 0.78.

  11. Argon-ion-induced formation of nanoporous GaSb layer: Microstructure, infrared luminescence, and vibrational properties

    Energy Technology Data Exchange (ETDEWEB)

    Datta, D. P.; Som, T., E-mail: tsom@iopb.res.in [SUNAG Laboratory, Institute of Physics, Bhubaneswar, Odisha 751 005 (India); Kanjilal, A. [Department of Physics, Shiv Nadar University, Uttar Pradesh 201 314 (India); Satpati, B. [Surface Physics and Material Science Division, Saha Institute of Nuclear Physics, 1/AF Bidhannagar, Kolkata 700 064 (India); Dhara, S. [Surface and Nanoscience Division, Materials Science Group, Indira Gandhi Centre for Atomic Research, Kalpakkam 603 102 (India); Das, T. D. [Department of Electronic Science, University of Calcutta, APC Road, Kolkata 700 009 (India); Kanjilal, D. [Inter-University Accelerator Centre, Aruna Asaf Ali Marg, New Delhi 110 067 (India)

    2014-07-21

    Room temperature implantation of 60 keV Ar{sup +}-ions in GaSb to the fluences of 7 × 10{sup 16} to 3 × 10{sup 18} ions cm{sup −2} is carried out at two incidence angles, viz 0° and 60°, leading to formation of a nanoporous layer. As the ion fluence increases, patches grow on the porous layer under normal ion implantation, whereas the porous layer gradually becomes embedded under a rough top surface for oblique incidence of ions. Grazing incidence x-ray diffraction and cross-sectional transmission electron microscopy studies reveal the existence of nanocrystallites embedded in the ion-beam amorphized GaSb matrix up to the highest fluence used in our experiment. Oxidation of the nanoporous layers becomes obvious from x-ray photoelectron spectroscopy and Raman mapping. The correlation of ion-beam induced structural modification with photoluminescence signals in the infrared region has further been studied, showing defect induced emission of additional peaks near the band edge of GaSb.

  12. Behavior of GaSb (100) and InSb (100) surfaces in the presence of H{sub 2}O{sub 2} in acidic and basic cleaning solutions

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Dongwan; Na, Jihoon; Lee, Seunghyo; Lim, Sangwoo, E-mail: swlim@yonsei.ac.kr

    2017-03-31

    Highlights: • Surface behavior of GaSb and InSb was investigated in acidic and basic solutions. • H{sub 2}O{sub 2} plays a key role in the surface oxidation of GaSb and InSb in acidic hydrochloric acid/hydrogen peroxide mixture (HPM) solution. • GaSb and InSb surfaces were hardly oxidized in basic ammonium hydroxide/hydrogen peroxide mixture (APM) solution in the presence of H{sub 2}O{sub 2}. • The effect of dilution of APM solution on the oxidation of the InSb surface was minimal. • Surface characteristics of GaSb and InSb in HPM and APM solutions are mainly determined by the behaviors of the group III elements rather than the group V element. - Abstract: Gallium antimonide (GaSb) and indium antimonide (InSb) have attracted strong attention as new channel materials for transistors due to their excellent electrical properties and lattice matches with various group III–V compound semiconductors. In this study, the surface behavior of GaSb (100) and InSb (100) was investigated and compared in hydrochloric acid/hydrogen peroxide mixture (HPM) and ammonium hydroxide/hydrogen peroxide mixture (APM) solutions. In the acidic HPM solution, surface oxidation was greater and the etching rates of the GaSb and InSb surfaces increased when the solution is concentrated, which indicates that H{sub 2}O{sub 2} plays a key role in the surface oxidation of GaSb and InSb in acidic HPM solution. However, the GaSb and InSb surfaces were hardly oxidized in basic APM solution in the presence of H{sub 2}O{sub 2} because gallium and indium are in the thermodynamically stable forms of H{sub 2}GaO{sub 3}{sup −} and InO{sub 2}{sup −}, respectively. When the APM solution was diluted, however, the Ga on the GaSb surface was oxidized by H{sub 2}O, increasing the etching rate. However, the effect of dilution of the APM solution on the oxidation of the InSb surface was minimal; thus, the InSb surface was less oxidized than the GaSb surface and the change in the etching rate of In

  13. Isolating GaSb membranes grown metamorphically on GaAs substrates using highly selective substrate removal etch processes

    Energy Technology Data Exchange (ETDEWEB)

    Lavrova, Olga [Univ. of New Mexico, Albuquerque, NM (United States). Dept. of Electrical and Computer Engineering. Center for High Technology Materials; Balakrishnan, Ganesh [Univ. of New Mexico, Albuquerque, NM (United States). Dept. of Electrical and Computer Engineering. Center for High Technology Materials

    2017-02-24

    The etch rates of NH4OH:H2O2 and C6H8O7:H2O2 for GaAs and GaSb have been investigated to develop a selective etch for GaAs substrates and to isolate GaSb epilayers grown on GaAs. The NH4OH:H2O2 solution has a greater etch rate differential for the GaSb/GaAs material system than C6H8O7:H2O2 solution. The selectivity of NH4OH:H2O2 for GaAs/GaSb under optimized etch conditions has been observed to be as high as 11471 ± 1691 whereas that of C6H8O7:H2O2 has been measured up to 143 ± 2. The etch contrast has been verified by isolating 2 μm thick GaSb epi-layers that were grown on GaAs substrates. GaSb membranes were tested and characterized with high-resolution X-Ray diffraction (HR-XRD) and atomic force microscopy (AFM).

  14. Indium gallium zinc oxide (IGZO)-based Ohmic contact formation on n-type gallium antimony (GaSb)

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Jeong-Hun; Jung, Hyun-Wook [Samsung-SKKU Graphene Center and School of Electronic and Electrical Engineering, Sungkyunkwan University, Suwon 440-746 (Korea, Republic of); Jung, Woo-Shik [Department of Electrical Engineering, Stanford University, Stanford, CA 94305 (United States); Park, Jin-Hong, E-mail: jhpark9@skku.edu [Samsung-SKKU Graphene Center and School of Electronic and Electrical Engineering, Sungkyunkwan University, Suwon 440-746 (Korea, Republic of)

    2014-02-14

    In this paper, Ohmic-like contact on n-type GaSb with on/off-current ratio of 1.64 is presented, which is formed at 500 °C by inserting IGZO between metal (Ni) and GaSb. The resulting Ohmic contact is systematically investigated by TOF-SIMS, HSC chemistry simulation, XPS, TEM, AFM, and J–V measurements. Two main factors contributing to the Ohmic contact formation are (1) InSb (or InGaSb) with narrow energy bandgap (providing low electron and hole barrier heights) formed by In diffusion from IGZO and Sb released by Ga oxidation, and (2) free Sb working as traps that induces tunneling current. - Highlights: • We demonstrate Ohmic-like contact on n-type GaSb with on/off-current ratio of 1.64. • The reverse current is increased by low electron barrier height and high TAT current. • The low electron barrier height is achieved by the formation of InGaSb. • Free Sb atoms also work as traps inducing high TAT current.

  15. The micro-magnetic structures of Mn sup + ion-implanted GaSb

    CERN Document Server

    Zhang Fu Qiang; Liu Zhi Kai

    2003-01-01

    The micro-magnetic structures of Mn sup + ion-implanted GaSb are studied using a magnetic force microscope (MFM). MFM images reveal that there are many magnetic domains with different magnetization directions in our samples. The magnetic domain structures and the magnetization direction of typical MFM patterns are analyzed by numeric simulation. (author)

  16. Diagnostic and characterization of the VCSEL diodes based on GaSb

    Czech Academy of Sciences Publication Activity Database

    Matulková, Irena; Cihelka, Jaroslav; Vyskočil, Jan; Zelinger, Zdeněk; Hulicius, Eduard; Šimeček, Tomislav; Civiš, Svatopluk

    2010-01-01

    Roč. 99, 1-2 (2010), s. 333-338 ISSN 0946-2171 R&D Projects: GA AV ČR IAA400400705 Institutional research plan: CEZ:AV0Z40400503; CEZ:AV0Z10100521 Keywords : VCSEL diode s * FTIR * GaSb Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 2.239, year: 2010

  17. Optimization of growth parameters for MOVPE-grown GaSb and Ga{sub 1-x}In{sub x}Sb

    Energy Technology Data Exchange (ETDEWEB)

    Miya, S.S.; Wagener, V. [Department of Physics, Private Bag X 77000, Nelson Mandela Metropolitan University, Port Elizabeth 6001 (South Africa); Botha, J.R., E-mail: reinhardt.botha@nmmu.ac.za [Department of Physics, Private Bag X 77000, Nelson Mandela Metropolitan University, Port Elizabeth 6001 (South Africa)

    2012-05-15

    The triethylgallium/trimethylantimony (TEGa/TMSb) precursor combination was used for the metal-organic vapour phase epitaxial growth of GaSb at a growth temperature of 520 Degree-Sign C at atmospheric pressure. Trimethylindium was added in the case of Ga{sub 1-x}In{sub x}Sb growth. The effects of group V flux to group III flux ratio (V/III ratio) on the crystallinity and optical properties of GaSb layers are reported. It has been observed from the crystalline quality and optical properties that nominal V/III ratios of values greater than unity are required for GaSb epitaxial layers grown at this temperature. It has also been shown that Ga{sub 1-x}In{sub x}Sb can be grown using TEGa as a source of gallium species at atmospheric pressure. The relationship between Ga{sub 1-x}In{sub x}Sb vapour composition and solid composition has been studied at a V/III ratio of 0.78.

  18. Staircase and saw-tooth field emission steps from nanopatterned n-type GaSb surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Kildemo, M.; Levinsen, Y. Inntjore; Le Roy, S.; Soenderga ring rd, E. [Department of Physics, Norwegian University of Science and Technology (NTNU), NO-7491 Trondlieim (Norway); Department of Physics, Norwegian University of Science and Technology (NTNU), NO-7491 Trondlieim, Norway and AB CERN, CH- 1211 Geneva 23 (Switzerland); Laboratoire Surface du Verre et Interfaces, UMR 125 Unite Mixte de Recherche CNRS/Saint-Gobain Laboratoire, 39 Quai Lucien Lefranc, F-93303 Aubervilliers Cedex (France)

    2009-09-15

    High resolution field emission experiments from nanopatterned GaSb surfaces consisting of densely packed nanocones prepared by low ion-beam-energy sputtering are presented. Both uncovered and metal-covered nanopatterned surfaces were studied. Surprisingly, the field emission takes place by regular steps in the field emitted current. Depending on the field, the steps are either regular, flat, plateaus, or saw-tooth shaped. To the author's knowledge, this is the first time that such results have been reported. Each discrete jump in the field emission may be understood in terms of resonant tunneling through an extended surface space charge region in an n-type, high aspect ratio, single GaSb nanocone. The staircase shape may be understood from the spatial distribution of the aspect ratio of the cones.

  19. Staircase and saw-tooth field emission steps from nanopatterned n-type GaSb surfaces

    CERN Document Server

    Kildemo, M.; Le Roy, S.; Søndergård, E.

    2009-01-01

    High resolution field emission experiments from nanopatterned GaSb surfaces consisting of densely packed nanocones prepared by low ion-beam-energy sputtering are presented. Both uncovered and metal-covered nanopatterned surfaces were studied. Surprisingly, the field emission takes place by regular steps in the field emitted current. Depending on the field, the steps are either regular, flat, plateaus, or saw-tooth shaped. To the author’s knowledge, this is the first time that such results have been reported. Each discrete jump in the field emission may be understood in terms of resonant tunneling through an extended surface space charge region in an n-type, high aspect ratio, single GaSb nanocone. The staircase shape may be understood from the spatial distribution of the aspect ratio of the cones.

  20. Powerful near-surface geothermal energy with vertical groundwater circulation; Leistungsfaehige oberflaechennahe Geothermie mit vertikaler Grundwasserzirkulation

    Energy Technology Data Exchange (ETDEWEB)

    Viernickel, Michael [Geo-En Energy Technologies GmbH, Berlin (Germany). Bereich Produktentwicklung und Projektierung komplexer Energiesysteme unter Einsatz von Geothermie

    2013-03-15

    The conversion of energy supply based on renewable energies will be electricity based and the efficient provision of heating and cooling can be done by electric heat pumps. In cities, however, where the open areas for geothermal systems are scarce, groundwater-based systems can be a powerful option. The development of a large heat reservoir via a single bore is possible with vertical groundwater circulation systems and is described here. [German] Der Umbau der Energieversorgung auf erneuerbare Energien wird Strom basiert sein und eine effiziente Bereitstellung von Waerme und Kaelte kann durch elektrische Waermepumpen erfolgen. Innerstaedtisch sind die Freiflaechen fuer Geothermieanlagen allerdings knapp, so dass Grundwasser basierte Anlagen eine leistungsfaehige Option darstellen koennen. Die Erschliessung eines grossen Waerme-Reservoirs ueber nur eine Bohrung ist mit vertikalen Grundwasserzirkulationsanlagen moeglich und wird hier beschrieben.

  1. A localized orbital description of ideal vacancies in GaP and GaSb

    International Nuclear Information System (INIS)

    Erbarut, E.; Tomak, M.

    1986-10-01

    Gaussian orbitals of s and p symmetry and an empirical pseudopotential Hamiltonian is employed for the study of electronic structures of ideal vacancies in GaP and GaSb. A reasonably accurate description of band structures and densities of states are attained. (author)

  2. GaSb solar cells grown on GaAs via interfacial misfit arrays for use in the III-Sb multi-junction cell

    Science.gov (United States)

    Nelson, George T.; Juang, Bor-Chau; Slocum, Michael A.; Bittner, Zachary S.; Laghumavarapu, Ramesh B.; Huffaker, Diana L.; Hubbard, Seth M.

    2017-12-01

    Growth of GaSb with low threading dislocation density directly on GaAs may be possible with the strategic strain relaxation of interfacial misfit arrays. This creates an opportunity for a multi-junction solar cell with access to a wide range of well-developed direct bandgap materials. Multi-junction cells with a single layer of GaSb/GaAs interfacial misfit arrays could achieve higher efficiency than state-of-the-art inverted metamorphic multi-junction cells while forgoing the need for costly compositionally graded buffer layers. To develop this technology, GaSb single junction cells were grown via molecular beam epitaxy on both GaSb and GaAs substrates to compare homoepitaxial and heteroepitaxial GaSb device results. The GaSb-on-GaSb cell had an AM1.5g efficiency of 5.5% and a 44-sun AM1.5d efficiency of 8.9%. The GaSb-on-GaAs cell was 1.0% efficient under AM1.5g and 4.5% at 44 suns. The lower performance of the heteroepitaxial cell was due to low minority carrier Shockley-Read-Hall lifetimes and bulk shunting caused by defects related to the mismatched growth. A physics-based device simulator was used to create an inverted triple-junction GaInP/GaAs/GaSb model. The model predicted that, with current GaSb-on-GaAs material quality, the not-current-matched, proof-of-concept cell would provide 0.5% absolute efficiency gain over a tandem GaInP/GaAs cell at 1 sun and 2.5% gain at 44 suns, indicating that the effectiveness of the GaSb junction was a function of concentration.

  3. Structural characterization of ZnTe grown by atomic-layer-deposition regime on GaAs and GaSb (100) oriented substrates

    Energy Technology Data Exchange (ETDEWEB)

    Castillo-Ojeda, Roberto Saúl [Universidad Politécnica de Pachuca (Mexico); Díaz-Reyes, Joel; Peralta-Clara, María de la Cruz; Veloz-Rendón, Julieta Salomé, E-mail: joel_diaz_reyes@hotmail.com [Centro de Investigación en Biotecnología Aplicada, Instituto Politécnico Nacional, Tlaxcala, (Mexico); Galván-Arellano, Miguel [Centro de Investigación y de Estudios Avanzados, Instituto Politécnico Nacional (Mexico); Anda-Salazar, Francisco de [Instituto de Investigación en Comunicación Óptica, Universidad Autónoma de San Luis Potosí (Mexico); Contreras-Rascon, Jorge Indalecio [Departamento de Física, Universidad de Sonora (Mexico)

    2017-10-15

    This work presents the characterization of ZnTe nano layers grown on GaAs and GaSb (100) substrates by the Atomic Layer Deposition (ALD) regime. Under certain conditions, the alternating exposition of a substrate surface to the element vapours makes possible the growth of atomic layers in a reactor where the atmosphere is high-purity hydrogen. ZnTe was grown simultaneously on GaAs and GaSb at the same run, allowing, a comparison between the effects produced by the superficial processes due to the different used substrates, thereby eliminating possible unintended changes of growth parameters. Nano layers on GaSb maintained their shiny appearance even at temperatures near 420°C. It was found that for exposure times below 2.5 s there was not growth on GaAs, while for GaSb the shortest time was 1.5 s at 385°C. By HRXRD the peak corresponding to (004) diffraction plane of ZnTe was identified and investigated, the FWHM resulted very wide (600-800 arcsec) indicating a highly distorted lattice mainly due to mosaicity. Raman scattering shows the peak corresponding to LO-ZnTe, which is weak and slightly shifted in comparison with the reported for the bulk ZnTe at 210 cm{sup -1}. Additionally, the measurements suggest that the crystalline quality have a dependence with the growth temperature. (author)

  4. Product life cycle management as contribution for a sustainable management - EXPO 2000 - Global Dialogue 'Science and Technology - Thinking for the Future'; Produkt Life Cycle Management als Beitrag fuer ein nachhaltiges Wirtschaften - EXPO 2000 - Global Dialogue 'Science and Technology - Thinking the Future'. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Westkaemper, E.; Hieber, M.; Dauensteiner, A.; Fengler, R.; Mannuss, O.; Niemann, J.; Stolz, M.

    2001-04-01

    Within the context of the project the IFF Stuttgart develops Life Cycle Management (LCM) concepts for heating systems and machine-tools, which where presented within the World Exhibition EXPO 2000. The Vaillant GmbH, manufacturer of heating systems, cooperates with the IFF in order to develop the prototype of an LCM controlled system. At the World Exhibition it was possible to control a complete heating system via the Internet and in this way to, say, monitor temperatures, switch on and off the pumps, fix errors or eliminate malfunctions. IFF has developed and realized a remote control of all parameters of the system, which may be controlled via Internet, e-mail or using the software program HZClient. In addition, an Internet-based software was developed, which will support customers to choose the heating system suited best for their individual needs. Finally, Life Cycle Costing (LCC) calculations for machine tools has presented demonstrating the proposed LCC approach in the sphere of capital goods. Therefore, the IFF has developed an interactive simulation tool which allows the economically oriented inspection of product life cycles and generates its overall economic result. The results of the project are transferable particularly on heating-systems of different manufactures. (orig.) [German] Das IFF Stuttgart entwickelte im Vorhaben Life Cycle Management-Konzepte am Beispiel von Heizungsanlagen und Werkzeugmaschinen, die den Besuchern des 'Global Dialogues' auf der EXPO 2000 vorgestellt wurden. In Kooperation des Heizungsherstellers Vaillant GmbH und dem Fraunhofer IPA wurde ein Prototyp einer nach dem LCM gesteuerten Heizungsanlage entwickelt. Hierzu hat das IFF Stuttgart die Fernsteuerung eines modernen Gas-Wandheizgeraetes realisiert. Saemtliche Parameter der Heizung koennen somit per Internet, Softwareprogramm sowie per E-Mail gesteuert werden. Ausserdem wurde ein web-basiertes Programm entwickelt, das Kunden bei ihrer Entscheidung ueber die fuer

  5. GSF-Forschungszentrum fuer Umwelt und Gesundheit, Institut fuer Hydrologie. Annual report 1995; GSF-Forschungszentrum fuer Umwelt und Gesundheit, Institut fuer Hydrologie. Jahresbericht 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-09-01

    The 1995 annual report of the Institute of Hydrology presents the findings of 19 current research projects on different subjects in hydrology. It is supplemented by information on cooperation with other scientific institutions in the form of lists of publications and reports, lectures and posters, university teaching projects, and finished and current dissertations. (VHE) [Deutsch] Der Jahresbericht 1995 des Institutes fuer Hydrologie im GSF-Forschungszentrum fuer Umwelt und Gesundheit stellt die Ergebnisse von derzeit 19 laufenden Untersuchungen zu unterschiedlichen hydrologischen Themen vor. Ergaenzt werden die Ausfuehrungen durch einen Ueberblick ueber die Zusammenarbeit mit anderen wissenschaftlichen Institutionen in Form von Verzeichnissen der Veroeffentlichungen und Berichte, der Vortraege und Poster, der Beitraege zur Lehre an Hochschulen sowie der abgeschlossenen und laufenden Dissertationen. (VHE)

  6. 75 FR 33306 - Notice of Meeting Location Change and Joint Meeting of FASAB and GASB

    Science.gov (United States)

    2010-06-11

    ... meeting is to discuss: --Measurement Attributes, --Reporting Model, --Cost Accounting, and --Governance... FEDERAL ACCOUNTING STANDARDS ADVISORY BOARD Notice of Meeting Location Change and Joint Meeting of FASAB and GASB AGENCY: Federal Accounting Standards Advisory Board. ACTION: Notice. Board Action...

  7. Silver nanoparticles on GaSb nanodots: a LSPR-boosted binary platform for broadband light harvesting and SERS

    Energy Technology Data Exchange (ETDEWEB)

    Bhatnagar, Mukul, E-mail: mkbh10@gmail.com; Ranjan, Mukesh; Mukherjee, Subroto [FCIPT, Institute for Plasma Research (India)

    2015-02-15

    We report the LSPR-augmented optical response of silver nanoparticle-topped GaSb nanodots produced by low-energy ion beam irradiation. Nanostructure ordering and interdot gap play crucial roles for inducing the LSPR effect, enhancing the absorbing capacity of the structure as validated by reflection measurements. The measured size of silver-capped GaSb nanodot varies from 28 to 48 nm. Enhanced plasmon coupling for the 600 eV configuration initiates the presence of giant electromagnetic fields as confirmed by LSPR and SERS measurements. Anisotropic Bruggeman effective medium approximation was performed to match the experimentally observed optical response of the nanostructure. Calculated screening factor values of 0.29 and 0.23 for 600 and 800 eV ion energy produced nanodot configurations were obtained, respectively, which are in tune with the measured reflected and SERS signal. The calculated dielectric constants confirm the directional anisotropy along the length of the silver-capped GaSb nanodots. The proposed model successfully matches the void fraction and nanostructure height in accordance with SEM and reported TEM measurements. Thus, the model developed can be used to optimize the maximum plasmonic coupling efficiency among the dots. We propose two key applications for this nanostructure, first as an absorptive substrate for deep space photovoltaics and second to act as an effective SERS substrate.

  8. Controlling applied to information processing: quality management applied to IP projects and IP services; Informationsverarbeitungs-Controlling: Qualitaetsmanagement fuer IV-Projekte und fuer IV-Service

    Energy Technology Data Exchange (ETDEWEB)

    Becker, B. [Vereinigung Deutscher Elektrizitaetswerke e.V. (VDEW), Frankfurt am Main (Germany); Beckers, F. [Isar-Amperwerke AG, Muenchen (Germany); Dewald, N. [Bayernwerk AG, Muenchen (Germany); Hauffe, P. [Pfalzwerke AG, Ludwigshafen am Rhein (Germany); Hein, F. [EVS AG Stuttgart (Germany); Hoederath, M. [Vereinigte Elektrizitaetswerke Westfalen AG (VEW), Dortmund (Germany); Seyen, R. [Staedtische Werke Nuernberg GmbH (Germany)

    1998-01-12

    The working group on information processing (IP) basics (in German: `IV-Grundlagen`) has prepared this contribution dealing with controlling applied to information processing. This new report, on the one hand, takes into consideration the role of the organizational IP unit as one offering its services to all sections of a company. On the other hand, information processing as an operational infrastructure influencing all business processes becomes increasingly important with respect to the competitiveness of the EVU. Therefore, quality management applied to IP projects and IP services must support this development. (orig./RHM) [Deutsch] Der VDEW Arbeitskreis `IV-Grundlagen` hat einen Beitrag zum Controlling fuer die Informationsverarbeitung erstellt. Hier geht zum einen die Rolle der Organisationseinheit IV als Dienstleister fuer alle Unternehmensbereiche ein. Zum anderen gewinnt die Informationsverarbeitung als betriebliche Infrastruktur fuer alle Geschaeftsprozesse zunehmende Bedeutung fuer die Wettbewerbsfaehigkeit der EVU. Das Qualitaetsmanagement fuer IV-Projekte und fuer IV-Service muss dies unterstuetzen. (orig./RHM)

  9. Development of porous structures in GaSb by ion irradiation

    International Nuclear Information System (INIS)

    Jacobi, C.C.; Steinbach, T.; Wesch, W.

    2012-01-01

    Ion irradiation of GaSb causes not only defect formation but also leads to the formation of a porous structure. To study the behaviour of this structural modification, GaSb was irradiated with 6 MeV Iodine ions and ion fluences from 5 × 10 12 to 6 × 10 15 ions/cm 2 . The samples were investigated by step height measurements and scanning electron microscopy (SEM). Experiments were performed with two different procedures: (CI) Continuous Irradiation of samples followed by measurements of the step height in air and (SI) Stepwise Irradiation of samples with measurements of the step height in air between subsequent irradiations. Samples irradiated continuously, show a linear increase of the step height with increasing ion fluence up to 1.5 × 10 14 ions/cm 2 followed by a steeper, linear increase for higher ion fluences up to a step height of 32 μm. This swelling is induced by a formation of voids, and the two different slopes can be explained by a transformation from isolated voids to a rod like structure. For samples irradiated accordingly to procedure (SI), the step height shows the same behaviour up to an ion fluence of 1.5 × 10 14 ions/cm 2 resulting in a step height of ≈3 μm but then decreases with further irradiation. The latter effect is caused by a compaction of the porous structure.

  10. The core of the energy issue. The responsibility of human beings for the creation; Vom Kern der Energiefrage. Die Verantwortung des Menschen fuer die Schoepfung

    Energy Technology Data Exchange (ETDEWEB)

    Knizia, K.

    2001-07-01

    The responsibility of human beings for the creation in its ethical dimension can only be made clear against a scientific-technical and economic background since human beings have to act in their natural surroundings in view of the world that is becoming more and more complex and at the same time closer through technology, and in view of the fast growing world population and the possible hazards of the viability of the biotope Earth. After World War I, Max Weber differentiated in his famous essay 'Politics as a Vocation' between the ethics of believe and the ethics of responsibility. It can be discussed whether both streams are according to the opinion of Max Weber 'in abysmal contrast'. (orig.) [German] In dem Wort 'Verantwortung' steckt der Wortstamm 'antworten' -, und zwar zunaechst dem eigenen Gewissen zu antworten. Das aber basiert auf sittlichem Bewusstsein, aber auch auf Wissen und Urteilsfaehigkeit und damit auf der Moeglichkeit, zu werten. Werten zu koennen, das erfordert aber, den Wirkungszusammenhang des Geschehens und die Rolle des Menschen in ihm zu verstehen. Die Verantwortung des Menschen fuer die Schoepfung ist nur vor einem naturwissenschaftlich-technischen und einem volkswirtschaftlichen Hintergrund in ihrem ethischen Bezug zu verdeutlichen. (orig.)

  11. Origin of the reverse optical-contrast change of Ga-Sb phase-change materials—An ab initio molecular-dynamics study

    Energy Technology Data Exchange (ETDEWEB)

    Dixon, J. A.; Elliott, S. R., E-mail: sre1@cam.ac.uk [Department of Chemistry, University of Cambridge, Cambridge CB2 1EW (United Kingdom)

    2014-04-07

    A large number of phase-change materials (PCMs) have been developed experimentally; however, only Ge{sub 2}Sb{sub 2}Te{sub 5}-based PCMs have been significantly explored using ab initio molecular-dynamics (AIMD) simulations. We present an AIMD study of the full melt/quench/anneal PC cycle for Ga-Sb materials, namely, the stoichiometric composition, GaSb, and the near-eutectic alloy, Ga{sub 16}Sb{sub 84}. The calculated electronic densities of states and optical reflectivities are compared between the amorphous and crystalline phases for both compositions, and it is shown that the contrasting opto-electronic properties of each crystalline material can be attributed to different structural transformations of Ga and Sb on crystallization from the amorphous state.

  12. Noise spectroscopy measurement of 2.3μm CW GaSb based laser diodes

    Czech Academy of Sciences Publication Activity Database

    Chobola, Z.; Juránková, V.; Vaněk, J.; Hulicius, Eduard; Šimeček, Tomislav; Alibert, C.; Rouillard, Y.; Werner, R.

    2005-01-01

    Roč. 1, - (2005), s. 70-73 ISSN 0033-2089 R&D Projects: GA MŠk(CZ) LC510; GA AV ČR(CZ) KSK1010104 Grant - others:EC Project GLADIS(XE) IST-2001-35178 Institutional research plan: CEZ:AV0Z1010914 Keywords : noise spectroscopy * GaSb * laser diode * 1/f noise Subject RIV: BM - Solid Matter Physics ; Magnetism

  13. GaSb grown from Sn solvent at low temperatures by LPE

    Energy Technology Data Exchange (ETDEWEB)

    Compean, V H; Anda, F de; Mishurnyi, V A; Gorbatchev, A Yu, E-mail: fdeanda@cactus.iico.uaslp.m [Universidad Autonoma de San Luis Potosi, Instituto de Investigacion en Comunicacion Optica, Av. Karakorum 1470, Col. Lomas 4a Sec., San Luis Potosi, SLP, CP 78210 (Mexico)

    2009-05-01

    The LPE growth of GaSb using Sn as a solvent has been studied in the temperature range 250-370 C and using liquid solutions covering a wide range of compositions. In order to find the growth conditions the phase diagram has been determined experimentally around the same temperature region. It is shown the Sn incorporates into the grown layers and that it behaves as an acceptor. The photoluminescence spectra of the grown layers with different Sn contents show characteristic peaks that can be attributed to different recombination processes.

  14. Growth morphology and structure of bismuth thin films on GaSb(110)

    DEFF Research Database (Denmark)

    Gemmeren, T. van; Lottermoser, L.; Falkenberg, G.

    1998-01-01

    Photoelectron spectroscopy, low-energy electron diffraction, scanning tunneling microscopy and surface X-ray diffraction were used to investigate the growth of thin layers of bismuth on GaSb(110). At submonolayer coverages, growth of two-dimensional islands occurs. A uniform (1 x I)-reconstructio...... that the (1 x 1)-phases formed by antimony and bismuth adsorbates on (110) surfaces of other III-V compound semiconductors are also described by the epitaxial continued layer model. (C) 1998 Elsevier Science B.V. All rights reserved....

  15. Antisites and anisotropic diffusion in GaAs and GaSb

    KAUST Repository

    Tahini, H. A.

    2013-10-02

    The significant diffusion of Ga under Ga-rich conditions in GaAs and GaSb is counter intuitive as the concentration of Ga vacancies should be depressed although Ga vacancies are necessary to interpret the experimental evidence for Ga transport. To reconcile the existence of Ga vacancies under Ga-rich conditions, transformation reactions have been proposed. Here, density functional theory is employed to calculate the formation energies of vacancies on both sublattices and the migration energy barriers to overcome the formation of the vacancy-antisite defect. Transformation reactions enhance the vacancy concentration in both materials and migration energy barriers indicate that Ga vacancies will dominate.

  16. Effect of tellurium on viscosity and liquid structure of GaSb melts

    Energy Technology Data Exchange (ETDEWEB)

    Ji Leilei [School of Material Science and Engineering, Jinan University, Jinan 250022 (China); Geng Haoran [School of Material Science and Engineering, Jinan University, Jinan 250022 (China)], E-mail: mse_genghr@ujn.edu.cn; Sun Chunjing [Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jinan 250061 (China); Teng Xinying; Liu Yamei [School of Material Science and Engineering, Jinan University, Jinan 250022 (China)

    2008-04-03

    The behavior of GaSb melt with tellurium addition was investigated using viscometer and differential scanning calorimetry (DSC). Normally, the viscosity of all melts measured decreased with the increasing temperature. However, anomalous transition points were observed in the temperature dependence of viscosity for Ga-Sb-Te system. Corresponded with the abnormal points on the viscosity-temperature curves, there were thermal effect peaks on the DSC curves. Furthermore, viscous activation energy and flow units of these melts and their structural features were discussed in this paper.

  17. Redundant Sb condensation on GaSb epilayers grown by molecular beam epitaxy during cooling procedure

    International Nuclear Information System (INIS)

    Arpapay, B.; Şahin, S.; Arıkan, B.; Serincan, U.

    2014-01-01

    The effect of four different cooling receipts on the surface morphologies of unintentionally-doped GaSb epilayers on GaSb (100) substrates grown by molecular beam epitaxy is reported. Those receipts include three different Sb beam equivalent pressure (BEP) levels and two different termination temperatures. Surface morphologies of epilayers were examined by wet etching, surface profiler, atomic force microscopy, scanning electron microscopy and Raman spectroscopy. The results demonstrate that during the cooling period, a Sb BEP of 4.00 × 10 −4 Pa at a termination temperature of 400 °C induces a smooth surface without Sb condensation whereas same Sb BEP at a termination temperature of 350 °C forms a 300 nm thick Sb layer on the surface. In addition, it is revealed that by applying a wet etching procedure and using a surface profiler it is possible to identify this condensed layer from the two-sloped feature of mesa profile. - Highlights: • Sb beam flux termination temperature is crucial for redundant Sb condensation. • Sb beam flux level has a role on the thickness of redundant condensed Sb layer. • Redundant Sb layer thickness can be measured by two-sloped mesa structure

  18. Bundesanstalt fuer Strahlenschutz. Annual report 2013; Bundesanstalt fuer Strahlenschutz. Jahresbericht 2013

    Energy Technology Data Exchange (ETDEWEB)

    Ebermann, Lutz (comp.)

    2014-10-01

    The annual report 2013 of the Bundesamt fuer Strahlenschutz covers the following issues: from scientific research to preventive consumer protection, actual questions of radiation protection actual challenges in the frame of environmental radiation monitoring; radioactive waste disposal; actual questions on the safety of nuclear technology. The report includes a list of publications.

  19. Utilizing Neon Ion Microscope for GaSb nanopatterning studies: Nanostructure formation and comparison with low energy nanopatterning

    International Nuclear Information System (INIS)

    El-Atwani, Osman; Huynh, Chuong; Norris, Scott

    2016-01-01

    Graphical abstract: - Highlights: • Carl Zeiss-neon ion microscope was used to irradiated GaSb surfaces with 5 keV neon. • In-situ imaging using helium beam and ex-situ imaging using an electron beam were performed. • Differences in imaging output between the helium and the electron beam were observed. • Transition occurred in the nanostructure type and formation mechanism as the energy is changed from 2 to 5 keV. • Collision cascade simulations suggested a transition toward bulk-driven mechanisms. - Abstract: Low energy irradiation of GaSb surfaces has been shown to lead to nanopillar formation. Being performed ex-situ, controlling the parameters of the ion beam for controlled nanopattern formation is challenging. While mainly utilized for imaging and cutting purposes, the development of multibeam (helium/neon) ion microscopes has opened the path towards the use of these microscopes for in-situ ion irradiation and nanopatterning studies. In this study, in-situ irradiation (neon ions)/imaging (helium ions) of GaSb surfaces is performed using Carl Zeiss-neon ion microscope at low energies (5 and 10 keV). Imaging with helium ions, nanodots were shown to form at particular fluences after which are smoothed. Ex-situ imaging with SEM showed nanopore formation of size controlled by the ion energy and fluence. Compared to lower energy ex-situ neon ion irradiation at similar fluxes, where nanopillars are formed, the results demonstrated a transition in the nanostructure type and formation mechanism as the energy is changed from 2 to 5 keV. Simulations show an increase in the ballistic diffusion and a decrease in the strength of phase separation as a function of ion energy in agreement with the suppression of nanopillar formation at higher energies. Collision cascade simulations suggest a transition toward bulk-driven mechanisms.

  20. Utilizing Neon Ion Microscope for GaSb nanopatterning studies: Nanostructure formation and comparison with low energy nanopatterning

    Energy Technology Data Exchange (ETDEWEB)

    El-Atwani, Osman, E-mail: oelatwan25@gmail.com [School of Nuclear Engineering, Purdue University, West Lafayette, Indiana 47907 (United States); Huynh, Chuong [Carl Zeiss Microscopy, LLC, One Corporation Way, Peabody, MA 01960 (United States); Norris, Scott [Department of Mathematics, Southern Methodist University, Dallas, TX 75275 (United States)

    2016-05-01

    Graphical abstract: - Highlights: • Carl Zeiss-neon ion microscope was used to irradiated GaSb surfaces with 5 keV neon. • In-situ imaging using helium beam and ex-situ imaging using an electron beam were performed. • Differences in imaging output between the helium and the electron beam were observed. • Transition occurred in the nanostructure type and formation mechanism as the energy is changed from 2 to 5 keV. • Collision cascade simulations suggested a transition toward bulk-driven mechanisms. - Abstract: Low energy irradiation of GaSb surfaces has been shown to lead to nanopillar formation. Being performed ex-situ, controlling the parameters of the ion beam for controlled nanopattern formation is challenging. While mainly utilized for imaging and cutting purposes, the development of multibeam (helium/neon) ion microscopes has opened the path towards the use of these microscopes for in-situ ion irradiation and nanopatterning studies. In this study, in-situ irradiation (neon ions)/imaging (helium ions) of GaSb surfaces is performed using Carl Zeiss-neon ion microscope at low energies (5 and 10 keV). Imaging with helium ions, nanodots were shown to form at particular fluences after which are smoothed. Ex-situ imaging with SEM showed nanopore formation of size controlled by the ion energy and fluence. Compared to lower energy ex-situ neon ion irradiation at similar fluxes, where nanopillars are formed, the results demonstrated a transition in the nanostructure type and formation mechanism as the energy is changed from 2 to 5 keV. Simulations show an increase in the ballistic diffusion and a decrease in the strength of phase separation as a function of ion energy in agreement with the suppression of nanopillar formation at higher energies. Collision cascade simulations suggest a transition toward bulk-driven mechanisms.

  1. Evolution of porous network in GaSb under normally incident 60 keV Ar{sup +}-ion irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Datta, D.P. [SUNAG Laboratory, Institute of Physics, Bhubaneswar 751 005, Odisha (India); Kanjilal, A. [Department of Physics, Shiv Nadar University, Gautam Budh Nagar 203 207, Uttar Pradesh (India); Garg, S.K. [SUNAG Laboratory, Institute of Physics, Bhubaneswar 751 005, Odisha (India); Sahoo, P.K. [School of Physical Sciences, National Institute of Science Education and Research, Bhubaneswar 751 005, Odisha (India); Satpati, B. [Surface Physics and Material Science Division, Saha Institute of Nuclear Physics, 1/AF Bidhannagar, Kolkata 700 064 (India); Kanjilal, D. [Inter-University Accelerator Center, Aruna Asaf Ali Marg, New Delhi 110 067 (India); Som, T., E-mail: tsom@iopb.res.in [SUNAG Laboratory, Institute of Physics, Bhubaneswar 751 005, Odisha (India)

    2014-08-15

    Highlights: • We show the evolution of a nanoporous layer in GaSb under Ar{sup +}-ion bombardment at normal incidence in the hitherto unexplored high fluence regime, namely 7 × 10{sup 16}–3 × 10{sup 18} ions cm{sup −2}. • Fluence dependent formation and growth of patches on top of the nanoporous layer is demonstrated by scanning electron microscopy. • We also show high amount of oxidation of such ion-beam-generated nanoporous structures, with formation of Ga{sub 2}O{sub 3} and Sb{sub 2}O{sub 3}. • Our study reveals the presence of nanocrystallites within the porous layer even at the highest fluence used in the experiment. • We interpret the experimental observations through a qualitative model where we take into account the effect of re-deposition of atoms sputtered from the nanoporous layer during Ar{sup +}-ion irradiation of GaSb. - Abstract: GaSb(1 0 0) samples were irradiated with 60 keV Ar{sup +}-ions at normal incidence for fluences in the range of 7 × 10{sup 16} to 3 × 10{sup 18} ions cm{sup −2} at room temperature, showing gradual evolution of a porous surface layer containing interconnected nanofibers. In particular, fluence dependent formation of patches on the nanoporous layer is observed by scanning electron microscopy. Combined results of grazing incidence x-ray diffraction and transmission electron microscopy reveal the presence of nanocrystallites in the porous structures. Compositional analysis by x-ray photoelectron spectroscopy indicates the development of oxide phases, mainly Ga{sub 2}O{sub 3} and Sb{sub 2}O{sub 3} where the former increases with fluence. We have proposed a model addressing a competition between ion-induced-defect driven growth of the nanoporous layer and redeposition of sputtered target atoms on the growing layer.

  2. Reactive ion etching of GaSb, (Al,Ga)Sb, and InAs for novel device applications

    International Nuclear Information System (INIS)

    LaTulipe, D.C.; Frank, D.J.; Munekata, H.

    1991-01-01

    Although a variety of novel device proposals for GaSb/(Al,Ga)Sb/InAs heterostructures have been made, relatively little is known about processing these materials. The authors of this paper have studied the reactive ion etching characteristics of GaSb, (Al,Ga)Sb, and InAs in both methane/hydrogen and chlorine gas chemistries. At conditions similar to those reported elsewhere for RIE of InP and GaAs in CH 4 /H 2 , the etch rate of (Al,Ga)Sb was found to be near zero, while GaSb and InAs etched at 200 Angstrom/minute. Under conditions where the etch mechanism is primarily physical sputtering, the three compounds etch at similar rates. Etching in Cl 2 was found to yield anistropic profiles, with the etch rate of (Al,Ga)Sb increasing with Al mole fraction, while InAs remains unetched. Damage to the InAs stop layer was investigated by sheet resistance and mobility measurements. These etching techniques were used to fabricate a novel InAs- channel FET composed of these materials. Several scanning electron micrographs of etching results are shown along with preliminary electrical characteristics

  3. Fibre-reinforced ceramics for vehicle brakes; Faserverstaerkte Keramiken fuer Bremsenanwendungen

    Energy Technology Data Exchange (ETDEWEB)

    Krenkel, W. [DLR Deutsches Zentrum fuer Luft- und Raumfahrt e.V., Stuttgart (Germany). Inst. fuer Bauweisen- und Konstruktionsforschung

    2000-07-01

    In the context of their aerospace research activities, DLR (Deutsches Zentrum fuer Luft- und Raumfahrt) developed a new process for producing ceramic fibre composite materials that are extremely light and tough. Apart from their applications in aerospace engineering, they have great potential for motor brakes with improved friction and wear characteristics. Excellent results were achieved with the new materials even with conventional brake liners. With customised liners, brake life may be prolonged to match the car life. Further applications are expected in trucks for transport in hazardous materials, high-speed trains, aircraft, industrial machinery and plants, and conveyor systems. [German] Im Rahmen der Raumfahrt-Forschung wurde vom Deutschen Zentrum fuer Luft- und Raumfahrt (DLR) das Fluessigsilicier-Verfahren zur Herstellung von keramischen Verbundwerkstoffen entwickelt. Diese extrem leichten und bruchzaehen Faserkeramiken haben sich unter den besonderen Bedingungen des Weltraums beispielsweise fuer Hitzeschutzstrukturen von Raumfahrzeugen hervorragend bewaehrt. Darueber hinaus zeigten Untersuchungen ein hohes Anwendungspotenzial fuer neue Bremsen mit deutlich verbesserten Reibungs- und Verschleisseigenschaften. Weiterentwicklungen des keramischen Gefueges fuehrten zu innovativen Leichtbau- bzw. Hochleistungs-Bremsen auf der Basis dieser harten und hitzebestaendigen Verbundwerkstoffe. Bereits mit serienmaessigen Bremsbelaegen wurden die heute geltenden Verschleiss- und Reibwertanforderungen teilweise weit uebertroffen. Die Leistungsfaehigkeit heutiger Bremssysteme kann damit deutlich gesteigert und die ungefederte Masse des Fahrwerks drastisch reduziert werden. Mit der zielgerichteten Anpassung geeigneter Belaege auf die neuen Keramik-Bremsscheiben scheint erstmals ein Einsatz von Lebensdauerbremsen moeglich zu sein, deren geringe Verschleissraten einen Austausch der Bremsscheiben waehrend der Betriebszeit eines Fahrzeugs ueberfluessig machen. Neben der

  4. Type II GaSb quantum ring solar cells under concentrated sunlight.

    Science.gov (United States)

    Tsai, Che-Pin; Hsu, Shun-Chieh; Lin, Shih-Yen; Chang, Ching-Wen; Tu, Li-Wei; Chen, Kun-Cheng; Lay, Tsong-Sheng; Lin, Chien-Chung

    2014-03-10

    A type II GaSb quantum ring solar cell is fabricated and measured under the concentrated sunlight. The external quantum efficiency confirms the extended absorption from the quantum rings at long wavelength coinciding with the photoluminescence results. The short-circuit current of the quantum ring devices is 5.1% to 9.9% more than the GaAs reference's under various concentrations. While the quantum ring solar cell does not exceed its GaAs counterpart in efficiency under one-sun, the recovery of the open-circuit voltages at higher concentration helps to reverse the situation. A slightly higher efficiency (10.31% vs. 10.29%) is reported for the quantum ring device against the GaAs one.

  5. Concurrent use of cisplatin or cetuximab with definitive radiotherapy for locally advanced head and neck squamous cell carcinomas

    Energy Technology Data Exchange (ETDEWEB)

    Levy, Antonin; Blanchard, Pierre; Bellefqih, Sara; Brahimi, Nacera; Deutsch, Eric; Daly-Schveitzer, Nicolas; Tao, Yungan [Gustave Roussy, Department of Radiation Oncology, Villejuif (France); Guigay, Joel [Gustave Roussy, Department of Medical Oncology, Villejuif (France); Janot, Francois; Temam, Stephane [Gustave Roussy, Department of Head and Neck Surgery, Villejuif (France); Bourhis, Jean [Gustave Roussy, Department of Radiation Oncology, Villejuif (France); University Hospital Lausanne, Department of Radiation Oncology, Lausanne (Switzerland)

    2014-09-15

    Radiochemotherapie (CRT) und Cetuximab-basierter Radiobiotherapie (BRT) in der Behandlung von lokal fortgeschrittenen Kopf-Hals-Plattenepithelkarzinomen (''head-and-neck squamous cell carcinoma'', HNSCC) wurden verglichen. Zwischen 2006 und 2012 wurden in unserem Institut 265 Patienten mit lokal fortgeschrittenem HNSCC behandelt. In der CRT-Gruppe waren 3 Cisplatin-Zyklen (n = 194, 73 %; 100 mg/m{sup 2} alle 3 Wochen) und in der BRT-Gruppe (n = 71, 27 %) woechentlich Cetuximab angesagt. Patienten mit BRT-Behandlung hatten eine erhoehte Anzahl von relevanten Begleiterkrankungen (Charlson-Index > 2) im Vergleich zur CRT-Gruppe (p = 0,005). Die mediane Nachbeobachtungszeit betrug 29 Monate fuer die Gesamtgruppe. In der CRT-Gruppe erhielten 56 % der Patienten die geplanten 3 Zyklen (92 % mindestens 2 Zyklen) und 79 % der Patienten mit BRT erhielten wenigstens 6 Zyklen. Die 2-Jahres-Gesamtueberlebensrate und die rezidivfreie Ueberlebensrate (PFS) lagen bei 72 respektive 61 %. In der multivariaten Analyse (MVA) waren T4-Stadium, N2-3-befallene Lymphknoten, Raucherstatus (Raucher verglichen mit Nichtrauchern) und nicht-oropharyngeale Bereiche in der Gesamtueberlebensrate nicht signifikant, waehrend die BRT grenzwertig signifikant war (p = 0,054). Die lokoregionale 2-Jahres-Kontrolle (LRC) und die fernmetastasenfreien (DC-)Raten betrugen 73 % und 79 %. Die CRT wies eine verbesserte LRC (76 % fuer CRT vs. 61 % fuer BRT 2 Jahre LRC) und DC (2-Jahres-Ueberlebensrate: 81 % fuer CRT vs. 68 % bei BRT) im Vergleich zur BRT auf (p < 0,001 und p = 0,01 im MVA). Subgruppenanalysen zeigten, dass die LRC fuer Patienten mit einer T4-Erkrankung mit CRT (vs. BRT) deutlich besser ausfiel als fuer T1-3-Stadien. BRT-Patienten wiesen hoehere Komplikationsraten Grad 3-4 (p < 0,001), CRT-Patienten eine hoehere Rate an Sondenernaehrung (p = 0,006) und Magen-Darm-Nebenwirkungen Grad 3-4 auf (p < 0,001). Diese retrospektive Analyse zeigt eine verbesserte LRC in lokal fortgeschrittenen HNSCC mit

  6. Research for energy efficiency; Forschung fuer Energieeffizienz

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-09-15

    The Federal Ministry of Economy enhanced its funding for research in the field of non-nuclear energy in the programme ''Forschung fuer Energieeffizienz'' (Research for Energy Efficiency). The programme focuses on established areas like modern power plant technologies (''Moderne Kraftwerkstechnologien''), fuel cells and hydrogen (''Brennstoffzelle, Wasserstoff''), and energy-optimized building construction (''Energieoptimiertes Bauen''). New subjects are energy-efficient towns and cities (''Energieeffiziente Stadt''), power grids for future power supply (''Netze fuer die Stromversorgung der Zukunft''), power storage (''Stromspeicher''), and electromobility (''Elektromobilitaet''). The brochure presents research and demonstration projects that illustrate the situation in 2010 when the programme was initiated. (orig.)

  7. Limiting scattering processes in high-mobility InSb quantum wells grown on GaSb buffer systems

    Science.gov (United States)

    Lehner, Ch. A.; Tschirky, T.; Ihn, T.; Dietsche, W.; Keller, J.; Fält, S.; Wegscheider, W.

    2018-05-01

    We present molecular beam epitaxial grown single- and double-side δ -doped InAlSb/InSb quantum wells with varying distances down to 50 nm to the surface on GaSb metamorphic buffers. We analyze the surface morphology as well as the impact of the crystalline quality on the electron transport. Comparing growth on GaSb and GaAs substrates indicates that the structural integrity of our InSb quantum wells is solely determined by the growth conditions at the GaSb/InAlSb transition and the InAlSb barrier growth. The two-dimensional electron gas samples show high mobilities of up to 349 000 cm2/Vs at cryogenic temperatures and 58 000 cm2/Vs at room temperature. With the calculated Dingle ratio and a transport lifetime model, ionized impurities predominantly remote from the quantum well are identified as the dominant source of scattering events. The analysis of the well-pronounced Shubnikov-de Haas oscillations reveals a high spin-orbit coupling with an effective g -factor of -38.4 in our samples. Along with the smooth surfaces and long mean free paths demonstrated, our InSb quantum wells are increasingly competitive for nanoscale implementations of Majorana mode devices.

  8. Formation Mechanism of Self Assembled Horizontal ErSb Nanowires Embedded in a GaSb(001) Matrix

    Science.gov (United States)

    Wilson, Nathaniel; Kraemer, Stephan; PalmstrøM, Chris

    The ErxGa1-xSb exhibits a variety of self-assembling nanostructures. In order to harness these nanostructures for use in devices and other material systems it is important to understand their formation. We have characterized the growth mechanism of self-assembled horizontal ErSb nanowires in a GaSb(001) matrix through the use of in-situ Scanning Tunneling Microscopy (STM) as well as ex-situ Transmission Electron Microscopy (TEM). We observe large GaSb macrosteps on the growth surface of Er.3Ga.7Sb samples. The areas near the ledge and base of the macrosteps show significant differences in size and distribution of ErSb nanowires. Results suggest that the formation of macrosteps drives the transition from vertical to horizontal nanowires in the ErxGa1-xSb system. We also observe a low temperature growth mode, which results in horizontal nanowire formation under a wide range of flux conditions. This new growth mode does not exhibit the embedded growth observed in the formation of nanowires at higher temperatures and may allow for horizontal nanowire formation without the presence of macrosteps, as well as the formation of smaller nanoparticles which may be useful for achieving smaller nanoparticle dimensions and electron confinement effects. This work was supported by NSF-DMR under 1507875.

  9. Fibre-reinforced ceramics for vehicle brakes; Faserverstaerkte Keramiken fuer Bremsenanwendungen

    Energy Technology Data Exchange (ETDEWEB)

    Krenkel, W. [DLR Deutsches Zentrum fuer Luft- und Raumfahrt e.V., Stuttgart (Germany). Inst. fuer Bauweisen- und Konstruktionsforschung

    2000-08-01

    Fibre-reinforced ceramics are extremely light, with a high fracture toughness, and have a high potential for applications in motor brakes. It is envisaged that they will last through the whole vehicle life. They can be used in passenger cars, industrial vehicles, high-speed trains, aircraft and in safety brakes in machines, plants and haulage systems. [German] Im Rahmen der Raumfahrt-Forschung wurde vom Deutschen Zentrum fuer Luft- und Raumfahrt (DLR) das Fluessigsilicier-Verfahren zur Herstellung von keramischen Verbundwerkstoffen entwickelt. Diese extrem leichten und bruchzaehen Faserkeramiken haben sich unter den besonderen Bedingungen des Weltraums beispielsweise fuer Hitzeschutzstrukturen von Raumfahrzeugen hervorragend bewaehrt. Darueber hinaus zeigten Untersuchungen ein hohes Anwendungspotenzial fuer neue Bremsen mit deutlich verbesserten Reibungs- und Verschleisseigenschaften. Weiterentwicklungen des keramischen Gefueges fuehrten zu innovativen Leichtbau- bzw. Hochleistungs-Bremsen auf der Basis dieser harten und hitzebestaendigen Verbundwerkstoffe. Bereits mit serienmaessigen Bremsbelaegen wurden die heute geltenden Verschleiss- und Reibwertanforderungen teilweise weit uebertroffen. Die Leistungsfaehigkeit heutiger Bremssysteme kann damit deutlich gesteigert und die ungefederte Masse des Fahrwerks drastisch reduziert werden. Mit der zielgerichteten Anpassung geeigneter Belaege auf die neuen Keramik-Bremsscheiben scheint erstmals ein Einsatz von Lebensdauerbremsen moeglich zu sein, deren geringe Verschleissraten einen Austausch der Bremsscheiben waehrend der Betriebszeit eines Fahrzeugs ueberfluessig machen. Neben der Verwendung dieser innovativen Leichtbaubremsen im PKW-Bereich wird zukuenftig deren Einsatz auch fuer Gefahrguttransporter, Hochgeschwindigkeitszuege, Flugzeuge und fuer Sicherheitsbremsen im Maschinen- und Anlagenbau sowie in der Foerdertechnik erwartet. (orig.)

  10. Radioisotope thermal photovoltaic application of the GaSb solar cell

    Science.gov (United States)

    Morgan, M. D.; Horne, W. E.; Day, A. C.

    1991-01-01

    An examination of a RTVP (radioisotopic thermophotovoltaic) conceptual design has shown a high potential for power densities well above those achievable with radioisotopic thermoelectric generator (RTG) systems. An efficiency of 14.4 percent and system specific power of 9.25 watts/kg were predicted for a system with sixteen GPHS (general purpose heat source) sources operating at 1100 C. The models also showed a 500 watt system power by the strontium-90 isotope at 1200 C at an efficiency of 17.0 percent and a system specific power of 11.8 watts/kg. The key to this level of performance is a high-quality photovoltaic cell with narrow bandgap and a reflective rear contact. Recent work at Boeing on GaSb cells and transparent back GaAs cells indicate that such a cell is well within reach.

  11. Effects of a GaSb buffer layer on an InGaAs overlayer grown on Ge(111) substrates: Strain, twin generation, and surface roughness

    Science.gov (United States)

    Kajikawa, Y.; Nishigaichi, M.; Tenma, S.; Kato, K.; Katsube, S.

    2018-04-01

    InGaAs layers were grown by molecular-beam epitaxy on nominal and vicinal Ge(111) substrates with inserting GaSb buffer layers. High-resolution X-ray diffraction using symmetric 333 and asymmetric 224 reflections was employed to analyze the crystallographic properties of the grown layers. By using the two reflections, we determined the lattice constants (the unit cell length a and the angle α between axes) of the grown layers with taking into account the rhombohedral distortion of the lattices of the grown layers. This allowed us the independent determination of the strain components (perpendicular and parallel components to the substrate surface, ε⊥ and ε//) and the composition x of the InxGa1-xAs layers by assuming the distortion coefficient D, which is defined as the ratio of ε⊥ against ε//. Furthermore, the twin ratios were determined for the GaSb and the InGaAs layers by comparing asymmetric 224 reflections from the twin domain with that from the normal domain of the layers. As a result, it has been shown that the twin ratio in the InGaAs layer can be decreased to be less than 0.1% by the use of the vicinal substrate together with annealing the GaSb buffer layer during the growth interruption before the InGaAs overgrowth.

  12. CERN: 500 Millionen fuer neuen Teilchenbeschleuniger

    CERN Multimedia

    2002-01-01

    "Die 20 Mitgliederlaender des Europaeischen Labors fuer Teilchenphysik in Genf CERN haben einen Sparplan zur Finanzierung eines neuen Teilchenbeschleunigers gut geheissen. Rund 500Millionen Franken sollen zu diesem Zweck uminvestiert werden" (1/2 page).

  13. GASB proposes new standards for financial reporting of postemployment benefits by state and local governments.

    Science.gov (United States)

    Johnson, Karl D

    2003-03-01

    GASB has proposed new standards that will affect the way in which governments report postemployment health care benefits in audited external financial statements, resulting in more complete and transparent reporting by employers and plans and more relevant and useful information for the users of governmental financial reports. This article provides an overview of current financial reporting standards and practice, the financial reporting objectives of the project, the proposed measurement approach, noteworthy specific proposals, and the projected timetable for completion of the project and implementation of the new standards.

  14. Bundesamt fuer Strahlenschutz 1989-2014

    International Nuclear Information System (INIS)

    Ebermann, Lutz

    2015-01-01

    The information on the Bundesamt fuer Strahlenschutz 1989-2014 includes the following contributions: Bfs concentrates the radiation protection expertise; knowledge generation, knowledge testing knowledge application: the BfS as scientific organization; radiation protection and health; radiation protection and environment, safety of nuclear waste management; safety in nuclear technology; specific challenges for BfS.

  15. Bundesforschungsanstalt fuer Ernaehrung. Annual report

    International Nuclear Information System (INIS)

    1996-01-01

    The 1994 annual report of the Bundesforschungsanstalt fuer Ernaehrung describes the tasks, structure and staff and fields of research of this institution and its scientific cooperation with other institutions. The report is supplemented by an alphabetic list off all publications. The BFE specializes in research on nutritional, food and ecotrophological sciences. (vhe) [de

  16. The use potential of aquifer thermal energy storage systems in Canada; Das Anwendungspotential fuer Aquiferwaermespeichersysteme in Kanada

    Energy Technology Data Exchange (ETDEWEB)

    Cruickshanks, F. [Environment Canada, Dartmouth, ON (Canada); Morofski, E. [Government Services Canada, Ottawa, ON (Canada). Technology RD and D

    1994-12-31

    This paper offers a brief overview of the historical and technical aspects of aquifer thermal energy storage and its use potential in commercial buildings in Canada. Aquifer thermal energy storage systems are now attractive both for new commercial buildings in Canada and for some already existing ones. This holds true especially of the Atlantic region, where fuel costs are rising and electric power rates vary according to the time of day. The simple pay-back period for ATES systems is between zero and five years. The economic aspects of the use of ATES systems in buildings are pointed out. (orig./BWI) [Deutsch] Dieser Beitrag gibt eine kurze Uebersicht der historischen und technischen Aspekte der Waermespeicherung in Aquiferen und deren Verwendungspotential in kommerziellen Gebaeuden in Kanada. Aquiferwaermespeicherungssysteme sind nunmehr attraktiv sowohl fuer neue als auch fuer manche bereits bestehenden kommerziellen Gebaeude in Kanada. Dies gilt insbesondere fuer die atlantische Region wegen der dort steigenden Kosten fuer Brennstoffe und tageszeitabhaengigen fuer elektrischen Strom. Die einfache Amortisationszeit fuer ATES-Systeme liegt zwischen null und fuenf Jahren. Die wirtschaftlichen Gesichtspunkte des Einsatzes von ATES-Systemen in kommerziellen Gebaeuden werden angefuehrt. (orig./BWI)

  17. Feasibility study for new ecolabels for the product group: Wood pellet firings. Final report; Machbarkeitsstudie fuer neue Umweltzeichen fuer die Produktgruppe: Holzpelletfeuerungen. Endbericht

    Energy Technology Data Exchange (ETDEWEB)

    Hoffmann, E.; Weiss, J.; Hirschl, B.

    2002-07-01

    This assessment is a feasibility study according to ISO 14024. It deals with the question whether an ecolabel is suitable for wood pellet heating systems and how concrete criteria for an ecolabel for wood pellet heating plants could be specified. The study begins with a comprehensive market analysis in order to identify possible plants for which an ecolabel would make sense. In the main part of the study, the environmental relevance of the chosen plants is analysed. For this analysis, plant manufacturers were interviewed and a comparison between wood pellet heating systems and heating systems which use gas, oil or wood was carried out. On the basis of this analysis, it was possible to derive a number of criteria which were discussed with company representatives and other experts in this field. As a result of this dialogue and the investigation process as a whole, the introduction of an ecolabel for wood pellet heating plants can be recommended. Wood pellet heating systems are characterized by their high level of automatation and the use of standardized fuels with constant high quality. Thus, they reach high combustion quality with low emission rates, and risks of misuse are minimized. They may contribute to the increased use of renewable energies and thereby to the achievement of climate protection goals. The proposed certification principles comprise requirements regarding (a) the efficient energy use (efficiency factor under partial load and nominal load, plant's supplementary energy consumption), (b) emission values for CO, NO{sub x}, dust and organic substances, (c) the offer of additional services, as well as (d) requirements with regard to the operating instructions. The transcription of the label is proposed as 'Ecolabel.. because low emission and energy-efficient'. (orig.) [German] Beim vorliegenden Gutachten handelt es sich um eine Machbarkeitsstudie nach ISO 14024. Es behandelt die Frage, ob ein Umweltzeichen fuer Holzpelletfeuerungen

  18. Predicting the durability of mineral external plaster using accelerated ageing tests; Prognose der Dauerhaftigkeit mineralischer Aussenputze mit Hilfe von beschleunigten Alterungstests

    Energy Technology Data Exchange (ETDEWEB)

    Bochen, Jerzy; Nowak, Henryk A. [Schlesische Technische Universitaet, Lehrstuhl Bauprozesse, Gliwice (Poland)

    2004-08-01

    This article presents a technique for accelerated ageing tests for different plasters. Two models were developed for describing the durability. The models describe changes in selected characteristics due to frost damage and leaching. The first model is based on changes in mass, the second on changes in strength. The models consider the main characteristics that influence durability, such as strength, porosity, permeability, adhesive tensil strength and aggressive environmental influences. Both models enable the durability of external plaster to be predicted. (Abstract Copyright [2004], Wiley Periodicals, Inc.) [German] Der Beitrag stellt eine Methode fuer beschleunigte Alterungstests von verschiedenen Putzen vor. Fuer die Beschreibung der Dauerhaftigkeit wurden zwei Modelle entwickelt. Die Modelle beschreiben Veraenderungen ausgewaehlter Eigenschaften, die infolge von Frostschaeden und Auslaugung auftreten. Das erste Modell basiert auf der Veraenderung der Masse und das zweite auf der Veraenderung der Festigkeit. In den Modellen werden die wesentlichen Eigenschaften beruecksichtigt, die die Dauerhaftigkeit beeinflussen, wie z. B. Festigkeit, Porositaet, Dichtigkeit, Haftzugfestigkeit und agressive Umwelteinwirkungen. Beide Modelle ermoeglichen die Prognose der Dauerhaftigkeit von Aussenputzen. (Abstract Copyright [2004], Wiley Periodicals, Inc.)

  19. Installation of a power supply system: The simple and low-cost way. Blocking oscillator with high performance factor; Aufbau einer Stromversorgung - einfach und preisguenstig. Realisierung eines Sperrwandlers mit hohem Leistungsfaktor

    Energy Technology Data Exchange (ETDEWEB)

    Adragna, C [SGS-Thomson Microelectronics, Agrate (Italy)

    1998-05-26

    There are several ways of constructing power supply systems with power factor correction. The two most common ways for PWM-based control are : Control via fixed-frequency average current or transition mode control. The former is more efficient but also much more costly. In the range below 150 W, a TM solution is the method of choice. (orig.) [Deutsch] Stromversorgungen mit Leistungsfaktor-Korrektur lassen sich auf verschiedene Arten realisieren. Die zwei gebraeuchlichsten Methoden fuer eine PWM-basierte Regelung sind: Regelung ueber den Festfrequenz-Strommittelwert oder der Transition Mode. Waehrend erstere leistungsfaehiger, aber auch erheblich aufwendiger ist, laesst sich letztere wesentlich billiger umsetzen. Im Leistungsbereich unter 150 W bietet sich eine TM-Loesung an. (orig.)

  20. Bundesanstalt fuer Strahlenschutz. Annual report 2013

    International Nuclear Information System (INIS)

    Ebermann, Lutz

    2014-01-01

    The annual report 2013 of the Bundesamt fuer Strahlenschutz covers the following issues: from scientific research to preventive consumer protection, actual questions of radiation protection actual challenges in the frame of environmental radiation monitoring; radioactive waste disposal; actual questions on the safety of nuclear technology. The report includes a list of publications.

  1. Measurements of ultrafast dynamics in a superconductor, YBa{sub 2}Cu{sub 3}O{sub 7-{delta}}, and a semiconductor, GaSb

    Energy Technology Data Exchange (ETDEWEB)

    Smith, D.C

    1998-07-01

    Measurements of ultrafast dynamics in GaSb and YBa{sub 2}Cu{sub 3}O{sub 7-}{delta} (YBCO) have been made with 1 ps or better resolution using time-resolved optical spectroscopy; pump-probe transmission and reflection, and time-resolved Raman spectroscopy. The study of carrier dynamics in GaSb focuses on the scattering of electrons between the F and L conduction band valleys by zone-boundary phonons {gamma}-L scattering in bulk GaSb and a GaSb/AlSb multiple quantum well sample has been investigated in a series of room temperature degenerate pump-probe transmission experiments with near bandgap excitation. There is a clear difference in the dynamics between experiments where electrons excited in {gamma} can/cannot directly scatter to the L valleys. Ensemble Monte Carlo simulations are presented which are in good agreement with the experiments. The strength of {gamma}-L scattering is quantified using an intervalley deformation potential for a single 'effective' zone-boundary phonon (25meV). A deformation potential of 3.6{+-}0.4 eVA{sup -1} is consistent with both the bulk and quantum well results. The temperature dependence of the dynamics in bulk GaSb is also explored. Time-resolved Raman spectroscopy (E{sub laser}{approx}E{sub 0}+{delta}{sub 0}) has been used to study {gamma}-F scattering by measuring the dynamics of phonons emitted during intravalley scattering. All the measured non-equilibrium phonon populations have a component whose lifetime is greater the phonons anharmonic lifetime. This component is interpreted as following the return of electrons from L to {gamma}. Comparison of the results with the pump-probe experiments indicates that this return is slowed by blocking of {gamma} states. The study of YBCO consists of pump-probe transmission and reflection measurements of thin films and single crystals in both the normal and superconducting states. Measurements of dynamics have been made with a wide range of probe energies lower than in any

  2. Optical properties of GaSb(001)-c(2 x 6): The role of surface antisite defects

    Energy Technology Data Exchange (ETDEWEB)

    Hogan, Conor; Del Sole, Rodolfo [Department of Physics, CNR-INFM-SMC, Roma (Italy); European Theoretical Spectroscopy Facility (ETSF), University of Rome ' ' Tor Vergata' ' , Roma (Italy); Magri, Rita [Centro S3-CNR-Istituto di Nanoscienze, Modena (Italy); Department of Physics, University of Modena and Reggio Emilia, Modena (Italy)

    2010-08-15

    We consider the formation of surface antisite defects on a previously proposed model for the GaSb(001)-c(2 x 6) surface. Based on ab initio total energy calculations, we show how these defects stabilize the otherwise metallic surface and how their formation is driven by the excess charge associated with the Sb-rich surface conditions. The surface-sensitive optical technique of reflectance anisotropy spectroscopy is shown to be crucial for detecting the defects, and computation of spectra yields a good agreement with experiment when defects are included in the surface reconstruction. (Abstract Copyright [2010], Wiley Periodicals, Inc.)

  3. Four-phonon processes in the thermal conductivity of GaSb

    International Nuclear Information System (INIS)

    Aliev, M.I.; Arasly, D.G.; Guseinov, R.E.

    1978-01-01

    Phonon thermal conductivity of GaSb in the 300-700 K temperature range is studied by the light pulsed heating which is aimed at estimation of contributions of different polarized branches of acoustic oscillations into lattice thermal conductivity. The role of optico-acoustic interactions and multiphonon processes in phonon-phonon scattering at high temperatures is discussed. It is shown that the X thermal conductivity caused by the current carriers is negligibly small, and the Xsub(ph) phonon conductivity changes depending on temperature according to the Xsub(ph) approximately Tsup(-1.4) law. While calculating Xsub(ph) according to the Holland model taking into account phonon scattering on point defects the phonon thermal conductivity is given as a sum of contributions from longitudinal and transverse low-frequency Xsub(th1) and high-frequency Xsub(th2) acoustic phonons. It is established that at T>500 K Xsub(ph) is caused only by high-frequency transverse phonons and to explain the observed Xsub(ph) dependence on temperature it is necessary to introduce four-phonon process along with the three-phonon processes into intraphonon scattering

  4. Bayerisches Landesamt fuer Umweltschutz. Annual report 1999; Bayerisches Landesamt fuer Umweltschutz. Taetigkeitsbericht 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    The annual report informs about the activities of the Bavarian Land Office for Environmental Protection in the following fields: clean air policy, waste management, management of soil pollution and remedial action, nuclear energy and radiation protection, nature conservation and landscape conservation, LfU laboratory, environmental hygiene, and data processing (SR) [German] Der vorliegende Bericht beschreibt die Taetigkeiten des Bayerischen Landesamtes fuer Umweltschutz auf folgenden Gebieten: Immissionsschutz, Abfallwirtschaft, Altlasten und Bodenschutz, Kernenergie und Strahlenschutz, Naturschutz und Landschaftspflege, Zentrallabors und Umwelthygiene, sowie Datenverarbeitung. (SR)

  5. Optical Links for the ATLAS Pixel Detector

    CERN Document Server

    Gregor, Ingrid-Maria

    In der vorliegenden Dissertation wird eine strahlentolerante optische Datenstrecke mit hoher Datenrate für den Einsatz in dem Hochenergiephysikexperiment Atlas am Lhc Beschleuniger entwickelt. Da die Lhc-Experimente extremen Strahlenbelastungen ausgesetzt sind, müssen die Komponenten spezielle Ansprüche hinsichtlich der Strahlentoleranz erfüllen. Die Qualifikation der einzelnen Bauteile wurde im Rahmen dieser Arbeit durchgeführt. Die zu erwartenden Fluenzen im Atlas Inner Detector für Silizium und Gallium Arsenid (GaAs) wurden berechnet. Siliziumbauteile werden einer Fluenz von bis zu 1.1.1015neq /cm2 in 1 MeV äquivalenten Neutronen ausgesetzt sein, wohingegen GaAs Bauteile bis zu 7.8.1015neq /cm2 ausgesetzt sein werden. Die Strahlentoleranz der einzelnen benötigten Komponenten wie z.B. der Laserdioden sowie der jeweiligen Treiberchips wurde untersucht. Sowohl die Photo- als auch die Laserdioden haben sich als strahlentolerant für die Fluenzen an dem vorgesehenen Radius erwiesen. Aus de...

  6. Part-turn gearboxes for electric actuators; Schwenkgetriebe fuer elektrische Stellantriebe

    Energy Technology Data Exchange (ETDEWEB)

    Herbstritt, M. [Riester (W.) GmbH und Co. KG, Muellheim (Germany)

    2002-09-01

    Different types of gearboxes provide a useful complement to the electric actuator type ranges. The gearboxes can be combined with the actuators in many ways. Multi-turn actuators, for example, can be turned into part-turn actuators. When using a modular system, a suitable solution for almost any automation task in the field of industrial valves can be found. (orig.) [German] Sinnvoll ergaenzt werden elektrische Stellantriebe fuer Armaturen durch verschiedene Arten von Getrieben. Die Getriebe sind in vielfaeltiger Weise mit den Stellantrieben kombinierbar. So werden beispielsweise aus Drehantrieben Schwenkantriebe. Mit einem Baukasten-System laesst sich so fuer nahezu jede Automatisierungsaufgabe im Bereich der Industriearmaturen eine passende Loesung finden. (orig.)

  7. Testing of corrosion resistant materials for evaporation plants for waste water from wet scrubbing of flue gas from power plants; Erprobung korrosionsbestaendiger Werkstoffe fuer Eindampfanlagen fuer Abwasser aus der Rauchgasreinigung von Grossfeuerungsanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Riedel, G. [Institut fuer Korrosionsschutz GmbH, Dresden (Germany); Stenner, F.; Brill, U. [Krupp-VDM GmbH, Werdohl (Germany)

    2001-07-01

    High alloyed superaustenitic steels and NiCrMo alloys are recommended in consequence of the results of extensive laboratory corrosion experiments under the strong corrosive conditions with up to 360 g chloride content at temperatures up to 85 C. Because results of laboratory corrosion tests are only of limited relevance to the behaviour in practice, field tests were carried out with immersion of welded materials and of heat exchanger tubes under operating conditions of an evaporation plant for waste water from flue gas desulphurization of a coal-fired power plant. Different kinds of high alloy superaustenitic steels and NiCrMo alloys were studied as TIG-welded specimens in immersion tests. (orig.) [German] Hochlegierte Sonderedelstaehle und NiCrMo-Legierungen empfehlen sich aufgrund der Ergebnisse umfassender Laboruntersuchungen unter den stark korrosiven Bedingungen fuer Eindampfanlagen fuer Abwasser aus der Nassreinigung von Rauchgasen von Grossfeuerungsanlagen mit bis zu 360 g/l Chloridgehalt und Temperaturen bis zu 85 C. Weil aber Ergebnisse von Laborpruefungen nur begrenzte Aussagefaehigkeit fuer das Verhalten unter Praxisbedingungen haben, wurden Feldversuche mit der Auslagerung geschweisster Werkstoffe und von Waermetauscherrohren unter Betriebsbedingungen einer Eindampfanlage fuer Abwasser aus der Rauchgasentschwefelung eines kohlebefeuerten Kraftwerks durchgefuehrt. (orig.)

  8. Utilizing offshore potentials for wind power generation; Nutzung der Offshore-Potentiale fuer die Windenergie

    Energy Technology Data Exchange (ETDEWEB)

    Hannemann, H. [Neptun Industrie GmbH, Rostock (Germany)

    2000-07-01

    The contribution discusses the importance of the offshore market and recommends measures to develop it. A turnkey offer is required for exports, which means that all organisations cooperating in the pilot project must prove their competence. The status of a pilot project in the Baltic Sea and the further plans for the park (20 systems, 40 MW, more than 10 km off the coast, water depth about 20 m) are reviewed. [German] Zur Erschliessung des Offshore - Marktes fuer Windenergieanlagen ist es erforderlich, die Technologie ''vor der eigenen Haustuer'' demonstrieren zu koennen. Nach einer Betrachtung der europaeischen Offshore - Windenergie - Potentiale und der davon moeglicherweise nutzbaren Anteile wird die Bedeutung des Offshore - Marktes deutlich. Besonders fuer die Hersteller ist der Offshore - Markt fuer den langfristigen Export von besonderer Bedeutung. Um den Export zu realisieren, ist ein Turnkey - Angebot erforderlich, so dass im Pilotprojekt alle an der gesamten Realisation beteiligten Organisationen ihre Kompetenz beweisen muessen und koennen. Der Stand eines Pilotprojektes in der Ostsee und die weitere Planung fuer den Park (20 Anlagen, 40 MW, >10 km Kuestenentfernung, ca. 20 m Wassertiefe) wird dargestellt. (orig.)

  9. Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS). Annual report 2013/14; Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS). Jahresbericht 2013/14

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2016-02-15

    The annual report 2013/14 of the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) includes projects and key activities on the following issues: reactor safety, waste disposal, radiation protection, environmental protection and the support of foreign authorities and TSO. The project executing organizations, the governmental funding, share holding and subsidiaries are summarized.

  10. Steam supply for the Principality of Liechtenstein. Process heat for industrial applications; Dampflieferung fuer das Fuerstentum Liechtenstein. Prozesswaerme fuer die Industrie

    Energy Technology Data Exchange (ETDEWEB)

    Dokter, Ernst [VfA Buchs fuer Kraft-Waerme-Kopplung und das Ferndampfsystem, Buchs (Switzerland)

    2009-07-15

    Switzerland is leading the world in thermal waste management. There are 29 incinerators (KVA - Kehrichtverbrennungsanlagen) with a capacity of 3.7 million t.p.a. They are operated by industrial or municipal owners and by the Verein fuer Abfallentsorgung Buchs SG. (orig.)

  11. Two-band superlinear electroluminescence in GaSb based nanoheterostructures with AlSb/InAs.sub.1-x./sub.Sb.sub.x./sub./AlSb deep quantum well

    Czech Academy of Sciences Publication Activity Database

    Mikhailova, M. P.; Ivanov, E.V.; Danilov, L.V.; Petukhov, A.A.; Kalinina, K.V.; Slobozhanyuk, S.I.; Zegrya, G.G.; Stoyanov, N. D.; Yakovlev, Yu. P.; Hospodková, Alice; Pangrác, Jiří; Oswald, Jiří; Zíková, Markéta; Hulicius, Eduard

    2014-01-01

    Roč. 115, č. 22 (2014), "223102-1"-"223102-5" ISSN 0021-8979 R&D Projects: GA ČR GA13-15286S Institutional support: RVO:68378271 Keywords : MOVPE * GaSb * InAs * electroluminescence * quantum well Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 2.183, year: 2014

  12. Feasibility study for new ecolabels according to ISO 14024 (type 1) within the product group: wood pellet heating systems; Machbarkeitsstudie fuer neue Umweltzeichen fuer die Produktgruppe: Holzpelletfeuerungen

    Energy Technology Data Exchange (ETDEWEB)

    Hoffmann, E.; Weiss, J.; Hirschl, B. [Institut fuer Oekologische Wirtschaftsforschung (IOEW) gGmbH, Berlin (Germany)

    2003-01-01

    This assessment is a feasibility study according to ISO 14024. It deals with the question whether an ecolabel is suitable for wood pellet heating systems and how concrete criteria for an ecolabel for wood pellet heating plants could be specified. The study begins with a comprehensive market analysis in order to identify possible plants for which an ecolabel would make sense. In the main part of the study, the environmental relevance of the chosen plants is analysed. For this analysis, plant manufacturers were interviewed and a comparison between wood pellet heating systems and heating systems which use gas, oil or wood was carried out. On the basis of this analysis, it was possible to derive a number of criteria which were discussed with company representatives and other experts in this field. As a result of this dialogue and the investigation process as a whole, the introduction of an ecolabel for wood pellet heating plants can be recommended. Wood pellet heating systems are characterized by their high level of automatation and the use of standardized fuels with constant high quality. Thus, they reach high combustion quality with low emission rates, and risks of misuse are minimized. They may contribute to the increased use of renewable energies and thereby to the achievement of climate protection goals. The proposed certification principles comprise requirements regarding (a) the efficient energy use (efficiency factor under partial load and nominal load, plant's supplementary energy consumption), (b) emission values for CO, NO{sub x}, dust and organic substances, (c) the offer of additional services, as well as (d) requirements with regard to the operating instructions. The transcription of the label is proposed as 'Ecolabel.. because low emission and energy-efficient'. (orig.) [German] Beim vorliegenden Gutachten handelt es sich um eine Machbarkeitsstudie nach ISO 14024. Es behandelt die Frage, ob ein Umweltzeichen fuer Holzpelletfeuerungen

  13. Bayerisches Landesamt fuer Umweltschutz. Annual report 2004; Bayerisches Landesamt fuer Umweltschutz. Jahresbericht 2004

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    Subjects: Central services; Air pollution abatement; Noise and vibration protection; Protection against non-ionising radiation; Waste management, land pollution and soil protection; Nuclear power and radiation protection; Conservation and landscaping; Central technical issues. The tasks of the Landesamt are illustrated by practical examples. [German] Das bayerische Landesamt fuer Umweltschutz stellt in seinem Jahresbericht die Aufgabenschwerpunkte und Taetigkeitwsfelder dar. Der Bericht gliedert sich in die Bereiche: Zentrale Dienste; Luftreinhaltung; Laerm- und Erschuetterungsschutz, Schutz vor nichtionisierender Strahlung; Abfallwirtschaft, Altlasten und Bodenschutz; Kernenergie und Strahlenschutz; Naturschutz und Landschaftspflege; Zentrale Fachaufgaben. Dabei werden anhand von konkreten Beispielen die Aufgaben des Landesamtes erlaeutert. (uke)

  14. Nanostructured films of inorganic-organic hybrid materials for application in photovoltaics; Nanostrukturierte Filme aus anorganisch-organischen Hybridmaterialien fuer die Photovoltaik

    Energy Technology Data Exchange (ETDEWEB)

    Perlich, Jan

    2009-06-25

    Nanostructured thin films of crystalline TiO{sub 2} for applications in photovoltaics were studied. The fabrication of the thin films is based on a hybrid approach. The anorganic metal oxide prepared via a sol-gel synthesis is structurated by the template properties of the applied organic block-copolymer. Via the film epitaxy by means of centrifugal coating first hybrid films (polymer-nanocomposite films) were fabricated, which were changed by calcination into crystalline TiO{sub 2} films with taylored morphology. The successful development of novel preparation approaches to the adaption to consisting conditions in the application field of photovoltaics contains a route to the fine-tuning of the morphology as well as the fabrication of hierarchical morphologies in different configurations. The structural study of the single nanostructurated TiO{sub 2} films up to the functional multilayer arrangement as photovoltaic demonstration cell was performed with conventionally imaging methods, as for instance scanning force microscopy and electron microscopy as well as the special small-angle X-ray scattering method under rigid incident angle (GISAXS). [German] Es wurden nanostrukturierte duenne Filme aus kristallinem TiO{sub 2} fuer Anwendungen in der Photovoltaik untersucht. Die Herstellung der duennen Filme basiert auf einem Hybridansatz. Das ueber eine Sol-Gel-Synthese bereitgestellte anorganische Metalloxid wird durch die Template-Eigenschaften des eingesetzten organischen Block-Copolymers strukturiert. Ueber die Filmaufbringung mittels Schleuderbeschichtung wurden zunaechst Hybridfilme (Polymer-Nanokompositfilme) hergestellt, die durch Kalzinierung in kristalline TiO{sub 2}-Filme mit massgeschneiderter Morphologie umgewandelt werden. Die erfolgreiche Entwicklung von neuartigen Praeparationsansaetzen zur Adaption an bestehende Gegebenheiten im Anwendungsgebiet der Photovoltaik beinhaltet eine Route zur Feineinstellung der Morphologie sowie die Herstellung von

  15. Macromolecular contrast media. A new approach for characterising breast tumors with MR-mammography; Makromolekulare Kontrastmittel fuer die MR-Mammographie. Ein neuer Ansatz fuer die Charakterisierung von Mammatumoren

    Energy Technology Data Exchange (ETDEWEB)

    Daldrup, H.E. [Contrast Media Lab., Dept. of Radiology, California Univ., San Francisco, CA (United States)]|[Muenster Univ. (Germany). Inst. fuer Klinische Radiologie; Roberts, T.P.L.; Roberts, H.C. [Contrast Media Lab., Dept. of Radiology, California Univ., San Francisco, CA (United States)]|[Mainz Univ. (Germany). Klinik und Poliklinik fuer Radiologie; Muehler, A. [Contrast Media Lab., Dept. of Radiology, California Univ., San Francisco, CA (United States)]|[Berlex Laboratories, Wayne, NJ (United States); Gossmann, A. [Contrast Media Lab., Dept. of Radiology, California Univ., San Francisco, CA (United States)]|[Koeln Univ. (Germany). Inst. und Poliklinik fuer Radiologische Diagnostik; Wendland, M.; Brasch, R.C. [Muenster Univ. (Germany). Inst. fuer Klinische Radiologie; Rosenau, W. [California Univ., San Francisco, CA (United States). Dept. of Pathology

    1997-09-01

    The value of macromolecular contrast agents (MMCM) for the characterization of benign and malignant breast tumors will be demonstrated in this review. Animal studies suggest a high potential of MMCM to increase the specificity of MR-mammography. The concept of tumor differentiation is based on the pathological hyperpermeability of microvessels in malignant tumors. MMCM show a leak into the interstitium of carcinomas, whereas they are confined to the intravascular space in benign tumors. Capabilities and limitations of the MMCM-prototype. Albumin-Gd-DTPA, for breast tumor characterization will be summarized and compared to the standard low molecular weight contrast agent Gd-DTPA. Initial experience with new MMCM, such as Dendrimers, Gd-DTPA-Polylysine and MS-325 will be outlined. The potential of `blood-pool`-iron oxides, such as AMI-227 for the evaluation of tumor microvascular permeabilities will be discussed. (orig.) [Deutsch] Diese Uebersicht stellt den Stellenwert makromolekularer Kontrastmittel (MMKM) fuer die MR-tomographische Charakterisierung von benignen und malignen Mammatumoren dar. Aufgrund experimenteller Studien lassen MMKM eine signifikante Verbesserung der Spezifitaet der dynamischen kontrastmittelunterstuetzten MR-Mammographie erwarten. Das differentialdiagnostische Konzept beruht auf der pathologischen Hyperpermeabilitaet von Kapillaren in Karzinomen, die einen MMKM-Austritt in das Tumorinterstitium bedingt, waehrend die intakten Kapillaren benigner Tumoren nicht permeabel fuer MMKM sind. Diagnostische Moeglichkeiten und Grenzen des MMKM-Prototyps, Albumin-Gd-DTPA (92 kD), werden dargestellt und mit dem niedermolekularen Standard-Kontrastmittel Gd-DTPA (500 D) verglichen. Erste Erfahrungen mit neuen, fuer die klinische Anwendung optimierten MMKM-Praeparaten, wie das Kaskadenpolymer, Gd-DTPA-Polylysine und das MS-325 werden vorgestellt. Das Potential von Blood-pool-Eisenoxidpraeparaten, z.B. AMI-227, fuer die Bestimmung von

  16. 50. Annual meeting of the Deutsche Gesellschaft fuer Neuroradiologie. Abstracts

    International Nuclear Information System (INIS)

    2015-01-01

    The volume on the 50th annual meeting of the Deutsche Gesellschaft fuer Neuroradiologie includes the abstracts concerning the following issues: infectious central nervous system diseases, neurodegenerations, infarction, petrosal bone pathology, neurointerventions.

  17. 49. Annual meeting of the Deutsche Gesellschaft fuer Neuroradiologie. Abstracts

    International Nuclear Information System (INIS)

    2014-01-01

    The conference proceedings of the 48. Annual meeting of the Deutsche Gesellschaft fuer Neuroradiologie contain abstracts on the following issues: neuro-oncological imaging, multimodal imaging concepts, subcranial imaging, spinal codes, interventional neuroradiology.

  18. Energy revolution for Africa; Energierevolution fuer Afrika

    Energy Technology Data Exchange (ETDEWEB)

    Gies, Erica

    2017-07-01

    Decreasing energy costs from renewable sources could enable many African countries to make the leap into a clean future. This would save the continent the detour via the classic dirty sources. [German] Sinkende Kosten fuer Energie aus erneuerbaren Quellen koennten vielen afrikanischen Laendern den Sprung in eine saubere Zukunft ermoeglichen. Damit wuerde sich der Kontinent den Umweg ueber die klassischen schmutzigen Quellen sparen.

  19. Technology for the future; Technik fuer die Zukunft

    Energy Technology Data Exchange (ETDEWEB)

    Dennenmoser, Martin; Steininger, Sebastian [Fraunhofer Institut fuer Solare Energiesysteme ISE, Freiburg im Breisgau (Germany). Electrical Energy Systems (EES)

    2013-10-15

    The presented case study by the Fraunhofer Institute ISE shows that the market for stationary electrochemical storage prices are currently too high for economical operation. In winter, a battery in Germany is not always fully loaded because of low sunlight. Therefore, the combination of a battery with a PV system at this time of year does not have enough full cycles to be economical. For more complete cycles of the year and consequently lower specific storage cost wind turbines or other power generators can be connected. Since - in contrast to lead acid batteries - there is no experience with long-term storage in lithium and redox flow batteries, this study is based on current forecasts. Compared to lithium-ion batteries, lead-acid and redox flow batteries have a lower efficiency, so that the investment costs of the battery must be lower because fewer savings can be achieved. Especially for short-term storage, the production costs must be reduced. The cost reduction potential of redox flow and lithium-ion batteries is due to the current technical state of development compared to lead acid batteries very high. This means that an economic operation in the future is possible with constant development of electricity and battery prices. [German] Die vorgestellte Fallstudie des Fraunhofer Instituts ISE zeigt, dass die Marktpreise fuer stationaere elektrochemische Speicher aktuell fuer einen wirtschaftlichen Betrieb zu hoch sind. Im Winter wird eine Batterie in Deutschland aufgrund der niedrigen Sonneneinstrahlung nicht immer komplett geladen. Daher hat die Kombination eines Speichers mit einer PV-Anlage zu dieser Jahreszeit nicht genug Vollzyklen, um wirtschaftlich zu sein. Fuer mehr Vollzyklen im Jahr und demzufolge geringere spezifische Speicherkosten koennen Windkraftanlagen oder andere Stromerzeuger angeschlossen werden. Da es- im Gegensatz zu Bleisaeure- Batterien - noch keine Erfahrung mit Langzeitspeichern im Bereich Lithium und Redox-Flow gibt, beruht diese

  20. Threshold limit values, test values and sanitation values for soil sanitation; Richt-, Pruef- und Sanierungswerte fuer den Bodenschutz

    Energy Technology Data Exchange (ETDEWEB)

    Karlaganis, G.; Dettwiler, J. [Bundesamt fuer Umwelt, Wald und Landschaft (BUWAL), Bern (Switzerland). Abt. Stoffe, Boden, Biotechnologie

    1998-09-01

    Soils, the basis for human, plant and animal life, are exposed to quantitative and qualitative deterioration. Quantitative deterioration refers to paving of ground but also to erosion and soil destruction. There are new regulations for physical protection of soil which refer to soil erosion, compacting and handling of soil during building construction. (orig.) [Deutsch] Boden als natuerliche Lebensgrundlage fuer Mensch, Tiere und Pflanzen ist quantitativen und qualitativen Beeintraechtigungen ausgesetzt. Als quantitative Beeintraechtigung gilt jede Art von Verminderungen der Boeden durch Bauten und Anlagen, aber auch durch Erosion oder Bodenschwund. Erlassen worden sind nun neue Bestimmungen fuer drei Bereiche des physikalischen Bodenschutzes, naemlich fuer die Bodenerosion, die Bodenverdichtung und fuer den Umgang mit dem Boden vor allem beim Bauen. Die Verordnung vom 1. Juli 1998 ueber Belastungen des Bodens (VBBo`98) erhaelt neu drei Arten von Beurteilungs- bzw. Massnahmewerten, naemlich Richtwerte, Sanierungswerte und Pruefwerte. (orig./ABI)

  1. EMUs for the Oeresund link; Elektrische Triebzuege fuer die Oeresundverbindung

    Energy Technology Data Exchange (ETDEWEB)

    Bengtsson, J.E. [Bombardier Transportation GmbH, Vaesteraas (Sweden)

    2001-07-01

    Danish and Swedish Railways jointly purchased new EMUs type Contessa for the Oresund Link, starting operation in summer 2000. By high acceleration the three car electric multiple units reach a top speed of 180 km/h. Several EMUs can be coupled quickly to the Flexfrontsystem technology. Further special features are equipments for two different line voltages as well as for two signalling and automatic train control systems and a low floor part. (orig.) [German] Die daenische und die schwedische Eisenbahn haben gemeinsam fuer die Oresund-Verbindung neue dreiteilige Triebzuege Contessa beschafft und im Sommer 2000 in Betrieb genommen. Die elektrischen Triebzuege erreichen mit hoher Beschleunigung 180 km/h Hoechstgeschwindigkeit und koennen dank des Flexfrontsystems schnell zu mehreren gekuppelt werden. Weitere Merkmale sind die Ausruestungen fuer zwei Fahrleitungsspannungen, zwei Signal- und Zugbeeinflussungssysteme sowie ein Niederflurbereich. (orig.)

  2. Significance of CT analysis of regional lymph node metastases in colorectal cancer; Bedeutung der CT fuer die Beurteilung regionaerer Lymphknotenmetastasen bei kolorektalen Karzinomen

    Energy Technology Data Exchange (ETDEWEB)

    Gomille, T.; Christ, F. [Duesseldorf Univ. (Germany). Abt. fuer Radiologie und Nuklearmedizin; Aleksic, M.; Ulrich, B. [Krankenhaus Gerresheim (Germany). Chirurgische Klinik

    1998-12-01

    Purpose: For preoperative staging of colorectal cancer a CT scan is frequently performed. This report examines the sensitivity of CT for regional lymph node metastasis of colorectal cancer using different criteria. Materials and methods: Preoperative CT scans of 153 patients with colorectal cancer were analyzed using different criteria for N1. The results were then compared to the postoperative histological findings. Results: For N1=lymph nodes (LN)>1 cm the sensitivity was 47%. For N1=LN>1 cm or an increased number of LN<1 cm the sensitivity was 71%. In patients with a primary tumor seen on CT, sensitivity rose to 87%. Discussion: Evidence of regional nodal metastatic disease is only relevant for rectal cancer, colon polyps, and for locally excised tumors when considering present surgical concepts for the treatment of colorectal cancer. In these cases CT analysis using the broadened criteria for N1 proposes a valuable argument regarding possible preoperative radiotherapy or an operative revision. (orig.) [Deutsch] Die Sensitivitaet fuer den Nachweis regionaerer Lymphknotenmetastasen kolorektaler Karzinome wurde unter Anwendung verschiedener Kriterien fuer das N1-Stadium an Patienten mit histologisch gesichertem Lymphknotenbefund untersucht. Fuer das Kriterium N1=Lymphknoten (LK)>1 cm betrug die Sensitivitaet 47%. Fuer N1=LK>1 cm/vermehrte Anzahl LK<1 cm war sie 71%, bei erkennbarem Primaertumor sogar 87%. Unter Beruecksichtigung der derzeit geltenden operativen Therapiekonzepte ist der Nachweis von regionaeren Lymphknotenmetastasen nur bei Rektumkarzinom bzw. fuer Kolonpolypen oder fuer lokal exzidierte Karzinome fuer das therapeutische Vorgehen relevant. In diesen Faellen leistet die CT mit den erweiterten Kriterien fuer ein N1-Stadium trotz hoeherer falsch-positiver Raten eine wertvolle Hilfestellung fuer die Entscheidung ueber eine neoadjuvante Bestrahlung oder eine Nachresektion. (orig.)

  3. Chemical etching of a GaSb crystal incorporated with Mn grown by the Bridgman method under microgravity conditions

    International Nuclear Information System (INIS)

    Chen Xiaofeng; Chen Nuofu; Wu Jinliang; Zhang Xiulan; Chai Chunlin; Yu Yude

    2009-01-01

    A GaSb crystal incorporated with Mn has been grown by the Bridgman method on the Polizon facility onboard the FOTON-M3 spacecraft. Structural defects and growth striations have been successfully revealed by the chemical etching method. By calculating various parameters of the convection, the striation patterns can be explained, and the critical value of the Taylor number, which characterizes the convective condition of the rotating magnetic field induced azimuthal flow, was shown. The stresses generated during crystal growth can be reflected by the observations of etch pit distribution and other structural defects. Suggestions for improving the space experiment to improve the quality of the crystal are given. (semiconductor materials)

  4. Chemical etching of a GaSb crystal incorporated with Mn grown by the Bridgman method under microgravity conditions

    Energy Technology Data Exchange (ETDEWEB)

    Chen Xiaofeng; Chen Nuofu; Wu Jinliang; Zhang Xiulan; Chai Chunlin; Yu Yude, E-mail: xfchen@semi.ac.c, E-mail: nfchen@semi.ac.c [Key Laboratory of Semiconductor Materials and Devices, Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083 (China)

    2009-08-15

    A GaSb crystal incorporated with Mn has been grown by the Bridgman method on the Polizon facility onboard the FOTON-M3 spacecraft. Structural defects and growth striations have been successfully revealed by the chemical etching method. By calculating various parameters of the convection, the striation patterns can be explained, and the critical value of the Taylor number, which characterizes the convective condition of the rotating magnetic field induced azimuthal flow, was shown. The stresses generated during crystal growth can be reflected by the observations of etch pit distribution and other structural defects. Suggestions for improving the space experiment to improve the quality of the crystal are given. (semiconductor materials)

  5. Particle Reduction Strategies - PAREST. Energy scenarios for PAREST. Sub-report; Strategien zur Verminderung der Feinstaubbelastung - PAREST. Energieszenarien fuer PAREST. Teilbericht

    Energy Technology Data Exchange (ETDEWEB)

    Joerss, Wolfram; Degel, Melanie [Institut fuer Zukunftsstudien und Technologiebewertung gGmbH (IZT), Berlin (Germany)

    2013-06-15

    In the research project PAREST emission scenarios to 2020 for particulate matter (PM{sub 10} und PM{sub 2,5}), and aerosol precursors SO{sub 2}, NO{sub x}, NH{sub 3} and NMVOC were prepared for Germany and Europe, mitigation measures evaluated and the results used to model the PM pollution load for Germany. In this part of the report to PAREST energy scenarios used for PAREST are presented. [German] Im Forschungsvorhaben PAREST wurden Emissionsszenarien bis 2020 fuer Feinstaub (PM{sub 10} und PM{sub 2,5}) und die Aerosol-Vorlaeufersubstanzen SO{sub 2}, NO{sub x}, NH{sub 3} und NMVOC fuer Deutschland und Europa erstellt, Minderungsmassnahmen evaluiert und daraus die PM-Immissionsbelastung fuer Deutschland modelliert. In diesem Teilbericht zu PAREST werden die fuer PAREST benutzten Energieszenarien vorgestellt.

  6. Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS). Annual report 2010/2011; Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS). Jahresbericht 2010/2011

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    The annual report 2010/11 of the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) covers the following topics: organization, corporate development and public relations; reactor accident in Fukushima; Projects and work priorities (reactor safety; waste management; radiation and environmental protection; international projects); project management and project support; equity participations and subsidiaries (RISKAUDIT IRSN/GRS International; institute for safety technologies (ISTec), European Nuclear Safety Training and Tutoring Institute (ENSTTI)).

  7. Bundesamt fuer Strahlenschutz. Annual report 1992

    International Nuclear Information System (INIS)

    1993-08-01

    The progress report submitted by Bundesamt fuer Strahlenschutz reveals that this federal radiation protection agency is not only entrusted with the fulfillment of the federal administrative tasks imposed by law but engages in applications-oriented research regarding the operational, metrological and health-related aspects of radiation protection, regarding nuclear safety and radioactive waste management. In addition, BfS takes care of public-relations tasks. The reports submitted by the BfS departments are completed by summaries of the main research results. (orig.) [de

  8. Integral energy concepts for office and residential buildings; Integrale Energiekonzepte fuer Buero- und Wohngebaeude

    Energy Technology Data Exchange (ETDEWEB)

    Velten, W.

    1998-06-01

    It has been confirmed by practical project experience that integral energy concepts are an excellent basis for the construction of energy-efficient buildings. In the extreme case buildings can even be self-sufficient in their energy supply. Uniting the responsibility for the overall energy and technology concept in the hands of a single contractor can help reduce frictional losses between those involved in the planning as well costs. A good example of this is the use of a simulation calculation for the prescribed demonstration of proper heat insulation. The presented projects show that it is possible to construct ecologically answerable buildings at attractively low costs. The presented concepts appear particularly convincing from the viewpoint of long-term maintenance of value and user-specific advantages such as agreeable working conditions. [Deutsch] Die konkreten Projekterfahrungen bestaetigen, dass durch integrale Energiekonzepte sowohl im Verwaltungs- als auch im Wohnungsbau hervorragende Voraussetzungen fuer energiesparende Gebaeude geschaffen werden koennen. Im Extremfall kann sogar eine autarke Energieversorgung erreicht werden. Durch Zusammenfassung der Gesamtverantwortung fuer das Energie- und Technikkonzept in einer Hand koennen Reibungsverluste zwischen den Planungsbeteiligten reduziert und Kosten gesenkt werden. Ein Beispiel hierfuer ist die Verbindung des vorgeschriebenen Waermeschutznachweises mit einer fuer alle Beteiligten wesentlich aussagekraeftigeren Simulationsrechnung. Die vorgestellten Projekte zeigen, dass oekologisch sinnvolle Gebaeude auch zu oekonomisch attraktiven Kosten erstellt werden koennen, wobei insbesondere der Aspekt des langfristigen Werterhalts und die nutzerspezifischen Vorteile, z.B. durch angenehmere Arbeitsbedingungen, fuer die vorgestellten Konzepte spricht. (orig.)

  9. The Institut for Mining - Chair in the Theory of Mining Methods and Operations at Clausthal Technological University; Das Institut fuer Bergbau - Professur fuer Bergbauliche Verfahrens- und Betriebslehre der TU Clausthal

    Energy Technology Data Exchange (ETDEWEB)

    Knissel, W.; Mischo, H. [Technische Univ. Clausthal, Clausthal-Zellerfeld (Germany). Inst. fuer Bergbau

    2002-09-05

    The Chair in the Theory of Mining Methods and Operations (Deep Mines) at the Institute for Mining at Clausthal Technological University deals with the theory of and research into underground extraction of solid mineral raw materials. With the concentration and concentration of the German mining industry the department has focussed more attention on foreign mining industries and utilisation of the earth's crust in general. The extractive mining industry is augmented by the underground utilisation of cavities for disposal purposes and for infrastructural tasks. Accordingly the courses offered have been extended towards environmental protection and geotechnics. In particular basic research in the field of disposal in mines has become one of the main areas of research in the department not least of all because of the financing from public funds. Theory, research and further training now cover underground extraction in mines, disposal in mines and rehabilitation of contaminated industrial sites. (orig.) [German] Die Proffesur fuer Bergbauliche Verfahrens- und Betriebslehre (Tiefbau) am Institut fuer Bergbau der TU Clausthal befasst sich in Lehre und Forschung mit der untertaegigen Gewinnung von festen mineralischen Rohstoffen. Mit dem Rueckgang und der Konzentration des deutschen Bergbaus hat sich der Lehrstuhl staerker dem Auslandsbergbau und allgemein der Erdkrustennutzung zugewandt. Der Gewinnungsbergbau findet seine Ergaenzung in der untertaegigen Nutzung von Hohlraeumen fuer Entsorgungszwecke und fuer Infrastrukturaufgaben. Dementsprechend ist das Studienangebot in Richtung Umweltschutz und Geotechnik erweitert worden. Insbesondere die Grundlagenforschung auf dem Gebiet des Entsorgungsbergbaus ist zu einem Forschungsschwerpunkt des Lehrstuhls geworden, nicht zuletzt aufgrund der Finanzierung aus oeffentlichen Mitteln. Lehre, Forschung und Weiterbildung decken heute den untertaegigen Gewinnungsbergbau, den Entsorgungsbergbau sowie die Sanierung von

  10. Short-wave infrared barriode detectors using InGaAsSb absorption material lattice matched to GaSb

    Energy Technology Data Exchange (ETDEWEB)

    Craig, A. P.; Percy, B.; Marshall, A. R. J. [Physics Department, Lancaster University, Lancaster LA1 4YB (United Kingdom); Jain, M. [Amethyst Research Ltd., Kelvin Campus, West of Scotland Science Park, Glasgow G20 0SP (United Kingdom); Wicks, G.; Hossain, K. [Amethyst Research, Inc., 123 Case Circle, Ardmore, Oklahoma 73401 (United States); Golding, T. [Amethyst Research Ltd., Kelvin Campus, West of Scotland Science Park, Glasgow G20 0SP (United Kingdom); Amethyst Research, Inc., 123 Case Circle, Ardmore, Oklahoma 73401 (United States); McEwan, K.; Howle, C. [Defence Science and Technology Laboratory, Porton Down, Salisbury, Wiltshire SP4 0JQ (United Kingdom)

    2015-05-18

    Short-wave infrared barriode detectors were grown by molecular beam epitaxy. An absorption layer composition of In{sub 0.28}Ga{sub 0.72}As{sub 0.25}Sb{sub 0.75} allowed for lattice matching to GaSb and cut-off wavelengths of 2.9 μm at 250 K and 3.0 μm at room temperature. Arrhenius plots of the dark current density showed diffusion limited dark currents approaching those expected for optimized HgCdTe-based detectors. Specific detectivity figures of around 7×10{sup 10} Jones and 1×10{sup 10} Jones were calculated, for 240 K and room temperature, respectively. Significantly, these devices could support focal plane arrays working at higher operating temperatures.

  11. Use of process observers at sewage treatment plants; Einsatz von Prozessbeobachtern fuer Klaeranlagen

    Energy Technology Data Exchange (ETDEWEB)

    Jumar, U.; Alex, J. [Institut fuer Kommunikation und Automation e.V. Magdeburg (IFAK), Barleben (Germany); Rosenwinkel, K.H.; Obenaus, F. [Hannover Univ. (Germany). Inst. fuer Siedlungswasserwirtschaft und Abfalltechnik

    1999-07-01

    The paper describes the use of online simulation for prognosticating plant behaviour, training plant operators, and for obtaining state data not to be obtained otherwise. Whereas, for the mathematical modelling of the process, the established approaches Activated Sludge Model (ASM) 1 and 2 could be reverted to, new methodics needed to be developed for continuous model tracking in order to solve the conflict between a large number of parameters in the model and scarce online measuring data on the spot. The result is a practicable solution which harnesses available knowledge concerning the significance of suitable parameters for model adaptation. First of all, essential demands on and objectives of a process observer for sewage treatment plants are elaborated. Then a software system is described with reference to successful pilot installations which permits model-based process control and remote monitoring of sewage treatment plant. (orig.) [German] Der Beitrag beschreibt die Nutzung der Online-Simulation fuer die Prognose des Anlagenverhaltens, das Training der Anlagenfahrer und die Gewinnung ansonsten nicht messbarer Zustandsinformationen. Waehrend fuer die mathematische Modellierung des Prozesses auf die etablierten Ansaetze ASM 1 und 2 (Activated Sludge Model) zurueckgegriffen werden konnte, musste fuer die laufende Modellnachfuehrung eine neue Methodik entwickelt werden, um den Konflikt zwischen grosser Parameteranzahl im Modell und geringer Online-Messinformation vor Ort zu loesen. Das Ergebnis ist eine praktikable Loesung, die das vorhandene Wissen um die Signifikanz zur Modellanpassung geeigneter Parameter ausnutzt. In den folgenden Ausfuehrungen werden zunaechst wesentliche Anforderungen und Zielstellungen eines Prozessbeobachters fuer Klaeranlagen herausgearbeitet. Unter Bezugnahme auf erfolgreiche Pilotinstallationen wird anschliessend ein Software-System vorgestellt, das eine modellgestuetzte Betriebsfuehrung und Fernueberwachung von Klaeranlagen

  12. Power electronics for local fuel cell/-battery plants; Leistungselektronik fuer dezentrale Brennstoffzellen/-Batterieanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Krykunov, Oleksandr

    2009-10-13

    With their high efficiency and modular structure, fuel cells are an attractive option for decentral power supply. An important component of decentral power supply systems is the power-electronic control element for supply of electric power from the fuel cell to the three-phase electricity grid. Control elements can be constructed of a unidirectional DC/DC converter with a current inverter connnected in series. The investigation focused on the development of the DC/DC converter with minimum constructional and control requirements and optimum adaption of the DC/DC converter to the characteristics of the fuel cell. (orig.) [German] Die Brennstoffzelle stellt mit ihrem hohen Wirkungsgrad und ihrem modularen Aufbau eine attraktive Option fuer die Verwendung in einem dezentralen Energieversorgungssystem dar. Eine wichtige Komponente des dezentralen Energieversorgungssystems sind die leistungselektronischen Stellglieder fuer die Einspeisung der elektrischen Energie aus der Brennstoffzelle in das dreiphasige Netz. Die leistungselektronischen Stellglieder koennen aus einem undirektionalen DC/DC-Wandler und einem nachgeschalteten Wechselrichter realisiert werden. Die Entwicklung des DC/DC-Wandlers mit einem moeglichst geringeren Bauelemente- und Steuerungsaufwand fuer diese leistungselektronischen Stellglieder und die Anpassung des DC/DC-Wandlers an die Eigenschaften der Brennstoffzelle war das Ziel dieser Arbeit. (orig.)

  13. Pleading for a rational energy policy; Fuer eine aufgeklaerte Energiepolitik

    Energy Technology Data Exchange (ETDEWEB)

    Tillessen, U. [Colenco Power Consulting AG, Baden (Switzerland)

    1999-09-01

    To the argument that the long half-life values of the most important products of fission represent an unacceptable burden for coming generations, the author retorts that this is an emotion-directed pseudo-argument. Anyone who ventures into deep geological strata, such as the final storage area Konrad, should also count in terms of geological periods. From this point of view, a million years - however difficult to imagine for the average human being - is not a very long time. Toxic chemical waste is accepted by society, even if the toxicity should remain for all time. The article is an extract from a lecture given by the author to the Franco-German Society for Science and Technology. (orig.) [German] Dem Argument, die langen Halbwertszeiten der wichtigsten Spaltprodukte beinhalte eine nicht zu verantwortende Belastung fuer die nachfolgenden Generationen, haelt Autor Tillessen entgegen, dass dies ein auf Emotionen abzielendes Scheinargument sei. Wer sich, wie zum Beispiel beim Endlager Konrad, in tiefe geologische Schichten begebe, duerfe auch in geologischen Zeitraeumen rechnen. Und da sei eine Million Jahre, so wenig vorstellbar das auch fuer den Durchschnitts-Menschen sei, eben keine allzulange Zeit. Chemische Giftabfaelle wuerden von der Gesellschaft akzeptiert, obwohl ihre Toxitaet ewig waehre. Der Beitrag des Autors ist ein Auszug aus einer Rede, die er vor der Deutsch-Franzoesischen Gesellschaft fuer Wissenschaft und Technik gehalten hat. Aus diesem Anlass hatte Tillessen vorgeschlagen, ein von einer Stiftung getragenes deutsch-franzoesisches Institut zu gruenden, dessen Aufgabe es sein soll, mit mehr Rationalitaet die von teutonischer Romantik dominierte Technikdiskussion zu versachlichen. (orig.)

  14. Increase in the thermal strength of the binder phase of Cermets; Steigerung der Warmfestigkeit der Bindephase von Cermets

    Energy Technology Data Exchange (ETDEWEB)

    Grewe, H. [Krupp-Entwicklungszentrum, Bereich Werkstofftechnik, Essen (Germany); Kolaska, H. [Entwicklung Hartstoffe, Krupp Widia GmbH, Essen (Germany)

    1995-05-01

    According to recent investigations, hard metals with a good profile of characteristics can be produced from tungsten carbide with appropriate sintering conditions and with optimized alloying ratios in the Fe-Co-Ni system. The Co binder phase is substituted by a Fe-Co-Ni binder phase, by Co-Ni or Fe-Ni, or by alloys of the Nimonic type. The following analyses were carried out for the sintered HIP state, the quenched state, and the state of maximum magnetic and mechanical hardening: Light microscopy, measurement of the mechanical and technical characteristics, analysis of oxidation characteristics, hot hardness and edge-holding property, investigation of precipitation and hardening processes in the binder phase by a metallurgical analysis, and attempts to describe the kinetics of hardening. (orig./MM) [Deutsch] Neuere Untersuchungsergebnisse ergeben Hinweise, wonach unter Einhaltung bestimmter Sinterbedingungen und nach Optimierung der Legierungsverhaeltnisse im Dreistoffsystem Eisen-Cobalt-Nickel gute Aussichten fuer die Herstellung von Hartmetallen auf Wolframcarbid-Basis mit einem guenstigen Eigenschaftsprofil bestehen. Die uebliche Cobalt-Bindephase wird dabei durch eine Fe-Co-Ni-Bindephase, durch Co-Ni oder Fe-Ni oder durch Legierungen vom Nimonic-Typ substituiert. Aufbauend auf diesen Kenntnissen wurde eine konzeptionelle Modifizierung der Bindephase von Cermets vorgenommen, die auf einer Co-Ni-Legierung basiert und durch die Ausscheidung von intermetallischen Phasen mit moeglichst einfacher Struktur aushaertet. Dabei eilt die magnetische Aushaertung der mechanischen Aushaertung des Cermet-Versuchswerkstoffs voraus. Fuer den Sinter-HIP-Zustand, fuer den Abschreckzustand sowie fuer den Zustand der maximalen magnetischen und der maximalen mechanischen Aushaertung wurden folgende Untersuchungen durchgefuehrt: Lichtmikroskopie Messung der mechanisch-technologischen Eigenschaften, Beurteilung von Oxidationsverhalten, Warmhaerte und Schneidhaltigkeit, Untersuchung

  15. Profitability considerations for photovoltaics-based solar cooling systems; Wirtschaftlichkeitsbetrachtungen fuer photovoltaik-basierte solare Kuehlsysteme

    Energy Technology Data Exchange (ETDEWEB)

    Kohlenbach, Paul [Beuth Hochschule fuer Technik, Berlin (Germany). Fachbereich VIII

    2016-07-01

    In the present article it is studied, under which boundary conditions the application of photovoltaics-based cooling systems is presently economically meaningful. A comparison with a net-drived cold-water set (100 kW{sub r} 5000 full hours/year) as reference system is made. As influence quantity the levelized cost of cooling energy (LCCE) is defined. Following options were studied: - PV system is directly conducted to the cooling facility by means of physical cable connection - PV system is separately fed into the current network and payed back via feeding compensation. Additionally sensitivity analyses of selected parameters on the refrigeration costs were studied.

  16. Bundesanstalt fuer Martialforschung und -pruefung (BAM). Annual report 2001; Bundesanstalt fuer Materialforschung und -pruefung (BAM). Jahresbericht 2001

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    The volume reports the activities of the BAM, (Federal Office for Materials Research and Testing), and its departments for Analytical Chemistry/Reference Materials, Chemical Safety Engineering, Hazardous Materials Containment, Environmental Compatibility of Materials, Technology of Structural Materials, Polymers, Structural Stability and Safety, Materials Protection/Nondestructive Testing, and for Scientific-Technical Interdisciplinary Activities. (MM) [German] Der vorliegende Band berichtet ueber die Aktivitaeten der Bundesanstalt fuer Materialforschung und -pruefung und ihrer Abteilungen Analytische Chemie/Referenzmaterialien, Chemische Sicherheitstechnik, Gefahrgutumschliessungen, Umweltvertraeglichkeit von Materialien, Werkstofftechnik der Konstruktionswerkstoffe, Funktion von Polymeren, Bauwerkssicherheit, Materialschutz/Zerstoerungsfreie Pruefung und Technisch-wissenschaftliche Querschnittsfunktionen. (MM)

  17. Investigations on pretreatment of waste prior to fermentation by percolation using the ISKA {sup registered} process; Untersuchungen zur Vorbehandlung von Abfaellen vor der Vergaerung mittels Perkolation nach dem ISKA {sup registered} -Verfahren

    Energy Technology Data Exchange (ETDEWEB)

    Santen, H. [Technische Univ. Braunschweig (Germany). FG Abfallwirtschaft; Fricke, K. [Technische Univ. Braunschweig (Germany). Lehrstuhl Abfallwirtschaft; Engelhard, T.; Widmer, C. [ISKA GmbH, Ettlingen (Germany)

    2004-07-01

    Waste treatment prior to fermentation is a key aspect in achieving economic efficiency. One process is presented here in particular: percolation, in which waste is hydrolyzed aerobically, treated mechanically, and washed out with the aid of process water. The process involves a percolation stage followed by a fermentation stage. The process water burdened with organic matter is passed into a fermentation reactor in which the organic components are reacted anaerobically into biogas and bacterial mass, and the process water is recirculated into the percolation reactor. (orig.) [German] Vergaerungstechnologien zaehlen zu den etablierten Verfahren zur Gewinnung regenerativer Energien aus Biomasse. Fuer die Energieeffizienz dieser Verfahren sind die Leistung der Vergaerungsstufe, die Hoehe der Verfuegbarkeit der anaerob abzubauenden organischen Substanzen und der spezifische Energiebedarf des Behandlungsverfahrens massgeblich. Eine Schluesselstellung fuer die Optimierung beider Faktoren nimmt die Abfallaufbereitung vor der Vergaerung ein. Eine Technoloie zur Aufbereitung vor der Vergaerung basiert auf dem Verfahren der Perkolation, in der der Abfall aerob hydrolysiert,mechanisch aufgeschlossen und durch Zugabe von Prozesswasser ausgewaschen wird. Das Verfahren besteht aus einer Aufbereitung - der Perkolation - sowie einer nachgeschalteten Vergaerung. Das mit vergaerbarer Organik beladene Prozesswasser wird einem Vergaerungsreaktor zugefuehrt, in dem die organischen Komponenten anaerob zu Biogas und Bakterienmasse umgesetzt werden. Das aufbereitete Prozesswasser wird anschliessend wieder dem Perkolationsreaktor zugefuehrt. (orig.)

  18. Measurements and simulation of the interaction of turbulence and premixed flames; Messungen und Simulationen zur Wechselwirkung zwischen Turbulenz und vorgemischten Flammen

    Energy Technology Data Exchange (ETDEWEB)

    Durst, B

    2000-11-01

    The interaction between turbulence and hydrogen-flames was investigated in an explosion tube. The flow velocity around single flow obstacles was measured with a laser-Doppler system and compared to the flame velocity which was recorded using photodiodes. The highest turbulence intensity (up to 10 m/s) and correspondingly the highest flame acceleration was measured in the shear layer downstream of the obstacle with the highest blockage ratio. A closure model based on probability density functions (PDF) was developed for the time averaged chemical reaction rate for the purpose of simulating turbulent combustion processes. Comparisons of the results gained from simulations using the PDF combustion modell showed good agreement with the measurements performed. [German] Die Wechselwirkung zwischen Turbulenz und Wasserstoff-Flammen wurde in einem Explosionsrohr untersucht. Die Stroemungsgeschwindigkeit wurde mit einem Laser-Doppler System an Einzelhindernissen gemessen und mit der Flammengeschwindigkeit, die mittels Photodioden erfasst wurde, verglichen. In der Scherschicht hinter dem Hindernis mit der hoechsten Blockierrate wurde die hoechste Turbulenzintensitaet (bis 10 m/s) und damit die hoechste Flammenbeschleunigung gemessen. Fuer numerische Simulationen der turbulenten Verbrennung wurde ein Schliessungsansatz fuer die zeitgemittelte chemische Reaktionsrate entwickelt, der auf Wahrscheinlichkeitsdichtefunktionen (englisch: PDF) basiert. Vergleichsrechnungen mit dem PDF-Verbrennungsmodell zeigten gute Uebereinstimmung mit den durchgefuehrten Messungen.

  19. Adaptive real-time models of vehicle dynamics; Adaptive Echtzeitmodelle fuer die Kraftfahrzeugdynamik

    Energy Technology Data Exchange (ETDEWEB)

    Halfmann, C.; Holzmann, H.; Isermann, R. [Technische Univ. Darmstadt (Germany). Inst. fuer Automatisierungstechnik; Hamann, C.D.; Simm, N. [Opel (A.) AG, Ruesselsheim (Germany). Gruppe Chassis und Fahrerassistenzsysteme

    1999-12-01

    The application of modern simulation tools offering additional support during the vehicle development process is accepted to a large extent by most car manufacturers. Just like new model-based control strategies, these simulation investigations require very accurate - and thus very complex - models of vehicle dynamics, which can be processed in real time. As an example of such a vehicle model, this article describes a real-time vehicle simulation model which was developed at the Institute of Automatic Control at Darmstadt University of Technology, in co-operation with the ITDC of the Adam OPEL AG. By applying modern adaptation techniques, this vehicle model is able to calculate onboard the important variables describing the actual driving state even if the environmental conditions change. (orig.) [German] Der Einsatz von Simulationswerkzeugen zur Unterstuetzung der Fahrzeugentwicklung hat sich bei den meisten Automobilherstellern weitgehend durchgesetzt. Ebenso wie neuartige modellbasierte Regelstrategien verlangen diese Simulationsuntersuchungen nach immer exakteren - und damit komplexeren - fahrdynamischen Modellen, die in Echtzeit ausgewertet werden. Als Beispiel fuer ein solches Gesamtfahrzeugmodell beschreibt dieser Beitrag ein echtzeitfaehiges Modell fuer die Bewegung des Fahrzeugs um alle drei Hauptachsen, das am Institut fuer Automatisierungstechnik der TU Darmstadt in Kooperation mit dem Internationalen Technischen Entwicklungszentrum (ITEZ) der Adam Opel AG entwickelt wurde. Es ist durch den Einsatz von Adaptionsmethoden in der Lage, wichtige fahrdynamische Zustandsgroessen im Fahrzeug auch unter veraenderlichen Umgebungsbedingungen zu ermitteln. (orig.)

  20. Communicating to gain public acceptance of energy projects; Akzeptanzkommunikation fuer Energieprojekte

    Energy Technology Data Exchange (ETDEWEB)

    Pust, M. [TECSOL GmbH, Friedeburg (Germany)

    2014-07-01

    Whoever plans to execute energy projects in today's world should be aware of the fact that the social framework conditions surrounding such projects have changed significantly. For the organization executing the project to merely adhere to the legally prescribed authorization procedure and leave it until the end of the planning procedure to inform those affected is often no longer sufficient for gaining public acceptance. Large parts of the population criticise the usual procedures because they have lost confidence in this kind of decision making, which offers them too little scope for co-determination. Thus for some years there has been a growing number of cases where citizens demand full public participation and early information on why the project in question is needed and what kinds of impact it will have. Lack of acceptance can lead to resistance, with negative effects on the project and the companies involved. TECSOL takes care of the communication management alongside energy projects, taking its bearings by the existing standards for voluntary early information of the public, as recommended by the VDI (Guideline 7001) and required by the legislature (PlVereinhG = Law for Improvement of Public Participation and Harmonisation of Plan Approval Procedures). The lecture outlines the societal challenges involved as well as the possibilities for dealing fairly with demands of the population in the context of energy projects. This is illustrated using the model case of the ''Etzel cultural landscape'' as a practical example, in which TECSOL played a prominent role on behalf of IVG Caverns GmbH. [German] Wer heute Energieprojekte umsetzen will, muss sich im Klaren darueber sein, dass sich die gesellschaftlichen Rahmenbedingungen stark veraendert haben. Es reicht fuer die Akzeptanz des Vorhabens haeufig nicht mehr aus, dass ein Vorhabentraeger den rechtlich vorgegebenen Weg des Genehmigungsprozesses beschreitet und die betroffenen Buerger erst

  1. Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS). Annual report 2013/14

    International Nuclear Information System (INIS)

    2016-02-01

    The annual report 2013/14 of the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) includes projects and key activities on the following issues: reactor safety, waste disposal, radiation protection, environmental protection and the support of foreign authorities and TSO. The project executing organizations, the governmental funding, share holding and subsidiaries are summarized.

  2. Electronic structure and magnetism of Mn-doped GaSb for spintronic applications: A DFT study

    Energy Technology Data Exchange (ETDEWEB)

    Seña, N.; Dussan, A. [Departamento de Física, Grupo de Materiales Nanoestructurados y sus Aplicaciones, Universidad Nacional de Colombia, Bogotá (Colombia); Mesa, F. [Facultad de Ciencias Naturales y Matemáticas, Grupo NanoTech, Universidad del Rosario, Bogotá (Colombia); Castaño, E.; González-Hernández, R., E-mail: rhernandezj@uninorte.edu.co [Grupo de Investigación en Física Aplicada, Departamento de Física, Universidad del Norte, Barranquilla (Colombia)

    2016-08-07

    We have carried out first-principles spin polarized calculations to obtain comprehensive information regarding the structural, magnetic, and electronic properties of the Mn-doped GaSb compound with dopant concentrations: x = 0.062, 0.083, 0.125, 0.25, and 0.50. The plane-wave pseudopotential method was used in order to calculate total energies and electronic structures. It was found that the Mn{sub Ga} substitution is the most stable configuration with a formation energy of ∼1.60 eV/Mn-atom. The calculated density of states shows that the half-metallic ferromagnetism is energetically stable for all dopant concentrations with a total magnetization of about 4.0 μ{sub B}/Mn-atom. The results indicate that the magnetic ground state originates from the strong hybridization between Mn-d and Sb-p states, which agree with previous studies on Mn-doped wide gap semiconductors. This study gives new clues to the fabrication of diluted magnetic semiconductors.

  3. Bayerisches Landesamt fuer Umweltschutz. 1997 annual report and abstracts of publications; Bayerisches Landesamt fuer Umweltschutz. Taetigkeitsbericht 1997 und Kurzbeitraege

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-08-01

    The annual report informs about the activities of the Bavarian Land Office for Environmental Protection in the following fields: clean air policy, waste management, management of soil pollution and remedial action, nuclear energy and radiation protection, nature conservation and landscape conservation, LfU laboratory, environmental hygiene, and data processing (SR) [Deutsch] Der vorliegende Bericht beschreibt die Taetigkeiten des Bayerischen Landesamtes fuer Umweltschutz auf folgenden Gebieten: Immissionsschutz, Abfallwirtschaft, Altlasten und Bodenschutz, Kernenergie und Strahlenschutz, Naturschutz und Landschaftspflege, Zentrallabors und Umwelthygiene, sowie Datenverarbeitung. (SR)

  4. Solar building construction - new technologies; Solares Bauen - Neue Technologien fuer Gebaeude

    Energy Technology Data Exchange (ETDEWEB)

    Luther, J.; Voss, K.; Wittwer, V. [Fraunhofer-Inst. fuer Solare Energiesysteme, Freiburg (Germany). Abt. ``Thermische und Optische Systeme``

    1998-02-01

    There is an increasing demand for integrated building concepts in order to reduce energy consumption. Building design, construction and heating, ventilation and air-conditioning (HVAC) technology are decisive in this respect. Thus, an essentially higher energy efficiency is achieved and solar energy becomes the main energy source. An `active building envelope` assumes the task of controlling the energy flows between inside and outside. This paper reports on new components, system concepts and planning tools for solar building. (orig.) [Deutsch] Fuer zukuenftige Bauten werden in hohem Masse Forderungen nach integrierten Konzepten zur Begrenzung des Energieverbrauchs gestellt. Gestalt, Konstruktion und Klimatechnik sind dabei massgebliche Einflussfaktoren. Hierdurch wird eine wesentlich hoehere Energieeffizienz erzielt und Solarenergie kann die uebrigen Energiequellen zurueckdraengen. Eine `aktive Gebaeudehuelle` uebernimmt die Aufgabe, den Energiefluss zwischen Innen und Aussen zu steuern. Der Beitrag berichtet ueber neue Komponenten, Systemkonzepte und Planungswerkzeuge fuer das Solare Bauen. (orig.)

  5. Development of a new thin film technology for PV systems: Open-system CCSVT process for production of ZnSe/CuGaSe{sub 2} hetero diodes. Final report; Entwicklung einer neuen Duennschichttechnologie fuer die Photovoltaik: CCSVT-Verfahren im offenen System zur Herstellung von ZnSe/CuGaSe{sub 2}-Heterodioden. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Lux-Steiner, M.C.; Jaeger-Waldau, A.

    2000-07-01

    A new technology for fast, large-surface deposition of high-quality semiconducting thin films for PV systems. The new technology, CSVT (close-space vapour transport), is based on a combination of VPE (vapour phase epitaxy) in open systems and CVT (chemical vapour phase transport) in closed systems. The two-source CVD experiments with two different transport gases, i.e. Cu{sub 2}Se with iodine and Ga{sub 2}Se{sub 3} with HCl, enabled controlled variation of the Cu:Ga ratio in the gaseous phase. The solar cells produced had efficiencies of more than 4%. The best solar cell produced had an efficiency of 4.8% and an open terminal voltage of 863 mV. [German] Ziel des Vorhabens war die Entwicklung einer neuen Technologie zur schnellen, grossflaechigen Abscheidung von qualitativ hochstehenden, halbleitenden Duennschichten fuer die Photovoltaik. Das Konzept des neuen Abscheideverfahrens, CSVT (close-space vapour transport) im offenen System, basiert auf einer Kombination der etablierten Methoden VPE (vapour phase epitaxy) im offenen und CVT (chemical vapour phase transport) im geschlossenen System. Die 2-Quellen-CVD-Experimente mit den zwei unterschiedlichen Transportgasen (Cu{sub 2}Se mit Iod; Ga{sub 2}Se{sub 3} mit HCl) ermoeglichten die kontrollierte Variation des Cu:Ga=Verhaeltnisses in der Gasphase. Bisher konnten so Solarzellen mit Wirkungsgraden ueber 4% hergestellt werden, wobei bei der bisher besten Solarzelle ein Wirkungsgrad von {eta}=4.8% und eine offene Klemmenspannung von V{sub oc}=863 mV erreicht wurde. (orig.)

  6. Advertising campaign for natural gas vehicles is getting along; Werbung fuer Erdgasfahrzeuge kommt ins Rollen

    Energy Technology Data Exchange (ETDEWEB)

    Koerner, I. [me-gas, Projektgruppe Erdgasfahrzeuge, Berlin (Germany)

    2002-10-01

    Six students of the Berlin University of Arts developed a nationwide communication campaign for natural gas vehicles. The campaign is the first of its kind which is not restricted to industrial and commercial users. Apart from the innovative and unusual creations, it was the results of market research that created a sensation. [German] Sechs Studenten der Berliner Universitaet der Kuenste haben eine bundesweite Kommunikationskampagne fuer Erdgasfahrzeuge erarbeitet, die zum ersten Mal nicht nur die gewerblichen Vielfahrer ansprechen soll. Neben den ungewoehnlichen und zum Teil gewagten Kreationen waren es die Ergebnisse aus der Marktforschung, die fuer Ueberraschungen sorgten. (orig.)

  7. How to promote solar power. Strategic application of consumer and environmental psychology; Fuer Solarenergie. Konsumenten- und Umweltpsychologie strategisch anwenden

    Energy Technology Data Exchange (ETDEWEB)

    Huebner, G. [Halle Univ. (Germany). Lehrstuhl fuer Sozial- und Organisationspsychologie; Felser, G. [Halle Univ. (Germany). Lehrstuhl fuer Differentielle Psychologie und Psychologische Diagnostik

    2001-07-01

    Why are solar systems still so few and far between? The book presents answers based on a systematic analysis of the psychological aspects of the decision, e.g. consumer needs and motives. 'Social Marketing' is presented as a differentiated outline concept for developing strategies for selling solar power. The book addresses solar and agenda initiatives, environmental organisations, communities and energy-minded citizens as well as students of environmental science and psychology. [German] Warum sind Solaranlagen noch immer so selten? Antworten auf diese Frage finden sich im Buch, in dem aus Sicht der Konsumenten- und Umweltpsychologie die psychologischen Facetten der Entscheidung fuer Solarenergie, z.B. - die Beduerfnisse und Motive der Konsumenten von Solaranlagen - die Wirkungen von Informationsmaterial auf die Kaufentscheidung, erstmals systematisch analysiert werden. Mit dem 'Sozialen Marketing' wird ein differenziertes Rahmenkonzept fuer die Gestaltung von Strategien fuer Solarenergie vorgestellt. Dieses Buch ist vor allem hilfreich fuer Solar- und Agendainitiativen, Umweltverbaende, Kommunen und energiebewusste Buerger, da es praxisnahe Informationen und Handlungsempfehlungen vermittelt. Es wendet sich aber auch an Studierende der Umweltwissenschaften und der Psychologie. Es bereichert die Diskussion ueber Solarenergie mit Argumenten, die der Komplexitaet des Themas Rechnung tragen. (orig.)

  8. First-principles calculations of the electronic and structural properties of GaSb

    Energy Technology Data Exchange (ETDEWEB)

    Castaño-González, E.-E. [Universidad del Norte, Grupo de Investigación en Física Aplicada, Departamento de Física (Colombia); Seña, N. [Universidad Nacional de Colombia-Colombia, Departamento de Física, Grupo de Materiales Nanoestructurados y sus Aplicaciones (Colombia); Mendoza-Estrada, V.; González-Hernández, R., E-mail: rhernandezj@uninorte.edu.co [Universidad del Norte, Grupo de Investigación en Física Aplicada, Departamento de Física (Colombia); Dussan, A. [Universidad Nacional de Colombia-Colombia, Departamento de Física, Grupo de Materiales Nanoestructurados y sus Aplicaciones (Colombia); Mesa, F., E-mail: fredy.mesa@urosario.edu.co [Universidad del Rosario, Grupo NanoTech, Facultad de Ciencias Naturales y Matemáticas (Colombia)

    2016-10-15

    In this paper, we carried out first-principles calculations in order to investigate the structural and electronic properties of the binary compound gallium antimonide (GaSb). This theoretical study was carried out using the Density Functional Theory within the plane-wave pseudopotential method. The effects of exchange and correlation (XC) were treated using the functional Local Density Approximation (LDA), generalized gradient approximation (GGA): Perdew–Burke–Ernzerhof (PBE), Perdew-Burke-Ernzerhof revised for solids (PBEsol), Perdew-Wang91 (PW91), revised Perdew–Burke–Ernzerhof (rPBE), Armiento–Mattson 2005 (AM05) and meta-generalized gradient approximation (meta-GGA): Tao–Perdew–Staroverov–Scuseria (TPSS) and revised Tao–Perdew–Staroverov–Scuseria (RTPSS) and modified Becke-Johnson (MBJ). We calculated the densities of state (DOS) and band structure with different XC potentials identified and compared them with the theoretical and experimental results reported in the literature. It was discovered that functional: LDA, PBEsol, AM05 and RTPSS provide the best results to calculate the lattice parameters (a) and bulk modulus (B{sub 0}); while for the cohesive energy (E{sub coh}), functional: AM05, RTPSS and PW91 are closer to the values obtained experimentally. The MBJ, Rtpss and AM05 values found for the band gap energy is slightly underestimated with those values reported experimentally.

  9. Development of a concept for sustainable agriculture in the Elbe wetlands of Niedersachsen; Konzeptentwicklung fuer eine nachhaltige Landbewirtschaftung in den niedersaechsischen Elbtalauen

    Energy Technology Data Exchange (ETDEWEB)

    Prueter, J. [Alfred Toepfer Akademie fuer Naturschutz (NNA), Schneverdingen (Germany); Horlitz, T.; Sander, A. [Arbeitsgemeinschaft Umweltplanung (ARUM), Hannover (Germany)

    2000-07-01

    Since late 1997, a cooperative project headed by Alfred Toepfer Akademie fuer Naturschutz has been investigating ''Models of conservation and its application in agriculture - goals, instruments and cost of sustainable, environment-friendly agriculture in the Elbe river valley in Niedersachsen''. The project receives funds in the context of the BMBF project ''Elbe river ecology''. Using the specific methods and tools of ecology, landscaping, agriculture and economics, the fundamentals for future interdisciplinary landscape development concepts will be established. The contribution presents the methodology of concept development and some exemplary goals for sustainable agricultural development in the context of the project. [German] Seit Ende 1997 widmet sich im Rahmen der BMBF-Forschungsfoerderung ''Elbe-Oekologie'' ein Verbundforschungsvorhaben unter Federfuehrung der Alfred Toepfer Akademie fuer Naturschutz dem Thema ''Leitbilder des Naturschutzes und deren Umsetzung mit der Landwirtschaft - Ziele, Instrumente und Kosten einer umweltschonenden und nachhaltigen Landwirtschaft im niedersaechsischen Elbetal''. Mit den spezifischen Methoden und fachlichen Instrumenten der Oekologie, der Landschaftsplanung sowie der Agrarwissenschaften einschliesslich Oekonomie sollen Grundlagen fuer moegliche ressortuebergreifend getragene Konzepte fuer die zukuenftige Landschaftsentwicklung erarbeitet werden. Im folgenden werden methodische Grundlagen der Konzeptentwicklung und beispielhafte Zielaussagen fuer eine nachhaltige Landbewirtschaftung aus dem laufenden Projekt vorgestellt. (orig.)

  10. Meteorological systems for hydrological applications; Meteorologische Systeme fuer hydrologische Anwendungen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-31

    The development of hydrology with its many practical applications in water management has led to a great demand for hydrometeorological data, variables derived from meteorological measurements, and models. The report shows the many fields in which meteorological data are required in hydrology and water management. Measuring networks and methods are described and critically assessed, including remote measurement by radar and satellite. For the hydrologist, the most important variables to be derived are the regional precipitation and evaporation, each with the error source and size. Other factors of interest are the snowbreak, the expected maximum precipitation (rain), the statistical derivation of strong rain, and regionalisation methods for all variables derived. These methods are presented. The possibilities of meteorology, especially (WMO) in the field of data transmission systems are assessed. (orig./KW) [Deutsch] Die Entwicklung der Hydrologie mit ihren zahlreichen wasserwirtschaftlichen Anwendungen hat zu einem grossen Bedarf an hydrometeorologischen Daten, aus meteorologischen Messungen abgeleiteten Groessen und auch an Modellen gefuehrt. Wo ueberall sich ein Bedarf an meteorologischen Daten in Hydrologie und Wasserwirtschaft eingestellt hat, ist in diesem Bericht zusammengefasst. Es werden die verschiedenen Messnetze und Messverfahren beschrieben und kritisch beurteilt, auch die Radar- und Satellitenfernerkundung gehoeren dazu. Fuer den Hydrologen zaehlt zu den wichtigsten abgeleiteten Groessen der Gebietsniederschlag und die Gebietsverdunstung, jeweils mit Angabe von Fehlerquelle und Fehlerschwankung. Von Interesse sind auch die Schneeschmelze, der vermutlich maximale Niederschlag (Regen), die statistische Ableitung von Starkregen und Regionalisierungsmethoden aller abgeleiteten Groessen. Diese Verfahren werden vorgestellt. Die quantitative Niederschlagsvorhersage wird wegen ihrer Bedeutung fuer die operationellen hydrologischen Vorhersagen eingehend

  11. ISH. HVAC engineering yearbook 1999; ISH. Jahrbuch fuer Gebaeudetechnik 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-01

    The 1999 HVAC engineering yearbook contains contributions on energy conservation and optimization in the fields of ventilation and air conditioning: inter alia, solar cooling and air conditioning, optimum rating of ventilator units, and cooling ceilings with ventilation function. In the field of heating, the following topics are addressed, equally under the aspect of energy conservation: condensing boiler technology, hydraulic balancing of heating pipe systems and sequential boiler switching using fuzzy control. Further works deal with rational use of electricity in buildings, and building automation. 17 papers are individually listed in the Energy database. [Deutsch] Das Jahrbuch fuer Gebaeudetechnik 1999 enthaelt Beitraege zur Energieeinsparung und Optimierung auf den Gebieten Lueftung und Klimatisierung, u. a. solare Kuehlung und Klimatisierung, optimale Auslegung von Ventilator-Aggregaten und Kuehldecken mit Lueftungsfunktion. Auf dem Gebiet der Heizung werden ebenfalls unter dem Gesichtspunkt Energieeinsparung die Brennwerttechnologie, der hydraulische Abgleich von Heizungsrohrnetzen sowie Kesselfolgeschaltungen mit Fuzzy Control angesprochen. Weitere Arbeiten befassen sich mit der rationellen Elektrizitaetsverwendung in Geb auden sowie der Gebaeudeautomation. Fuer die Datenbank Energy wurden 17 Arbeiten separat aufgenommen.

  12. Groundwater monitoring programme. A guide for groundwater sampling and analysis. 2. ed.; Grundwasserueberwachungsprogramm. Leitfaden fuer Probenahme und Analytik von Grundwasser

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    Quality assurance guidelines have been developed and introduced in Baden-Wuerttemberg for groundwater monitoring. The contribution contains the fundamentals and technical guides for sampling and measurement of the Baden-Wuerttemberg groundwater monitoring programme, as well as parameter groups and a preliminary assessment of the methods. [German] Bei der Gewinnung von Umweltdaten sind hohe Anforderungen an die Qualitaet der erhobenen Daten zu stellen. Dies trifft in besonderem Masse gerade auch fuer Grundwasseruntersuchungen zu, da hier haeufig Konzentrationen im Bereich der Nachweisgrenze auftreten. Fuer das Grundwassermessnetz Baden-Wuerttemberg sind qualitaetssichernde Regelungen entwickelt und eingefuehrt worden. In der vorliegenden Zusammenstellung sind die Grundsatzpapiere, bzw. Technischen Anleitungen aus dem Grundwasserueberwachungsprogramm Baden-Wuerttemberg fuer die Grundwasserprobennahme sowie zu Messverfahren, Parametergruppen und zur ersten Beurteilung der Messergebnisse enthalten. (orig.)

  13. Good organization is essential for success. Pt. 1. Energy management for commercial buildings.; Eine gute Organisation ist Voraussetzung fuer den Erfolg. T. 1. Energiemanagement fuer die Gebaeudetechnik.

    Energy Technology Data Exchange (ETDEWEB)

    Rader, Michael [CentraLine c/o Honeywell, Schoenaich (Germany)

    2013-07-15

    Energy costs caused by heating, ventilation, air-conditioning and lighting systems, represent a significant portion of the total operating costs of a building. continuously rising prices of gas, oil and electricity increase the cost pressure on the building operators and users: energy efficiency is becoming a major factor for the competitiveness of a company. In the manufacturing sector, trade and hotel the energy costs have a direct impact on the company's margins. Thus, the willingness to invest in energy saving measures increased. [German] Energiekosten, verursacht durch Heizungs-, Lueftungs-, Klima- und Beleuchtungsanlagen, stellen einen signifikanten Anteil der Gesamtbetriebskosten eines Gebaeudes dar. Kontinuierlich steigende Preise fuer Gas, Oel und Elektrizitaet erhoehen den Kostendruck auf die Gebaeudebetreiber und -nutzer: Energieeffizienz wird zu einem bestimmenden Faktor fuer die Wettbewerbsfaehigkeit eines Unternehmens. Im produzierenden Gewerbe, im Handel und im Hotelgewerbe haben Energiekosten einen direkten Einfluss auf die Margen des Unternehmens. Dadurch erhoeht sich die Bereitschaft, in Energiesparmassnahmen zu investieren.

  14. The Rossendorf research site. The Rossendorf Research Center (FZR). The Rossendorf Verein fuer Kernverfahrenstechnik und Analytik (VKTA). The Rossendorf Foerderverein fuer Wissenschaft, Forschung und Technologie (ROTECH)

    International Nuclear Information System (INIS)

    1995-01-01

    The illustrated brochure presents the Rossendorf research site at a glance. There are two major new establishments, the Rossendorf Research Center and the Verein fuer Kernverfahrenstechnik und Analytik Rossendorf (VKTA), whose main activities cover basic research and tasks in the field of nuclear facilities decommissioning and radwaste management on site. (DG) [de

  15. A comparison of three different types of collectors for process heat uses; Vergleich von drei verschiedenen Kollektortypen fuer Prozesswaermeanwendungen

    Energy Technology Data Exchange (ETDEWEB)

    Brunold, S. [Solarenergie Pruef- und Forschungsstelle SPF-ITR, Rapperswil (Switzerland); Frey, R. [Solarenergie Pruef- und Forschungsstelle SPF-ITR, Rapperswil (Switzerland); Frei, U. [Solarenergie Pruef- und Forschungsstelle SPF-ITR, Rapperswil (Switzerland)

    1995-12-31

    A comparison of the measured and simulated values of three collector types shows that evacuated tube collectors are superior to transparent-insulation flat collectors in the case of high-temperature uses. At temperatures of 150 C and above good results were obtained using evacuated tube collectors with compound parabolic concentrators manufactured by Microtherm. CORTEC collectors are suited for temperatures in the range of 100 C to 150 C provided that the surface ratio is irrelevant. Costs play a decisive role when selecting systems. The results obtained show that improved transparent-insulation flat collectors can compete with evacuated tube collectors in the 100 C to 150 C temperature range. (orig.) [Deutsch] Ein Vergleich der gemessenen und simulierten Werte der drei Kollektoren zeigt, dass die Vakuumroehrenkollektoren fuer den Einsatz in Hochtemperaturanwendungen dem mit transparenter Waermedaemmung isolierten Flachkollektor ueberlegen sind. Der Vakuumroehrenkollektor mit CPC von Microtherm erzielt gute Resultate ab 150 C und mehr. Wogegen der CORTEC-Kollektor fuer den Einsatz im Temperaturbereich zwischen 100 C und 150 C geeignet ist, solange das Flaechenverhaeltnis keine Rolle spielt. Wie fuer die meisten Anwendungen spielen die Kosten eine entscheidende Rolle fuer die Wahl des eingesetzten Systems. Die Resultate zeigen, dass ein verbesserter mit TWD ausgeruesteter Flachkollektor im Temperaturbereich von 100 C bis 150 C konkurrenzfaehig zu Vakuumroehrenkollektoren sein kann. (orig.)

  16. Environmental criteria for building site selection; Umweltkriterien bei der Standortsuche fuer Bauvorhaben

    Energy Technology Data Exchange (ETDEWEB)

    Locher, B [Umweltbundesamt, Berlin (Germany)

    1995-09-01

    The author of the present paper provides information on the application of ecological standards as part of the regulation of development planning. (HW) [Deutsch] Die Autorin gibt in ihrem Vortrag Hinweise auf die Anwendung von oekologischen Standards als Regelungsbestandteile fuer die Bauleitplanung. (HW)

  17. Bundesamt fuer Strahlenschutz (BfS). Annual report 1991

    International Nuclear Information System (INIS)

    1992-08-01

    The progress report submitted by Bundesamt fuer Strahlenschutz reveals that this federal radiation protection agency is not only entrusted with the fulfillment of the federal administrative tasks imposed by law but engages in applications-oriented research regarding the operational, metrological and health-related aspects of radiation protection, regarding nuclear safety and radioactive waste management. In addition, BfS takes care of public-relations tasks. The reports submitted by the BfS departments are completed by summaries of the main research results. (DG) [de

  18. Experience with system safety approach in railroad technology in Europe and Far East and in aerospace technology; Erfahrungen mit Ansaetzen zur Systemsicherheit in der Bahntechnik in Europa und im Fernen Osten sowie in der Raumfahrttechnik

    Energy Technology Data Exchange (ETDEWEB)

    Schaebe, H. [Technischer Ueberwachungs-Verein InterTraffic GmbH, Koeln (Germany). Inst fuer Software, Elektronik, Bahntechnik

    2000-07-01

    Systemsicherheit basiert auf den EN Normen, waehrend wir in Asien mit den britischen DEF-STAN Normen konfrontiert wurden. Diese Herangehensweise ist zwar durch europaeische Methoden inspiriert, erfuhr im konkreten Beispiel jedoch einige spezifische Veraenderungen. Andererseits gibt es in der Raumfahrttechnik eine lange Tradition, die in Europa auf den PSS Normen der ESA und deren Nachfolgedokumenten, den ECSS Normen basiert. Zwischen diesen Vorgehensweisen gibt es eine Reihe von Gemeinsamkeiten, jedoch auch teilweise erhebliche Unterschiede. Die EN Serie stellt die Verfahrensweise des Sicherheitsnachweises in den Vordergrund. Es muss nachgewiesen werden, dass das System hinreichend sicher ist. Dabei werden Analysen wie FMECA, Hazard Analysen, Risikoanalysen und andere Methoden verwendet. Ein wichtiger Punkt ist die Bestimmung der Zielwerte fuer Sicherheitskenngroessen. Es werden Erfahrungen aus der Begutachtung von Projekten mit fahrerlosen Personentransportsystemen vorgestellt. Wir haben andererseits Analysen fuer Fahrzeuge erstellt, die fuer die Nordostlinie und die Changi Linie der Metro Singapur geliefert werden. Die Vorgehensweise hier war im wesentlichen von britischen DEF-STAN Normen geleitet. In der Praxis fuehrte die konkrete Vorgehensweise jedoch zu einer grossen Anzahl umfangreicher Analysen fuer eine Arbeitslokomotive die mit einem Fahrer besetzt ist. In der Raumfahrt sind auch oft zahlreiche Analysen notwendig, jedoch werden diese von Anzahl und Umfang im allgemeinen an das jeweilig System angepasst. Beispiele werden fuer Pruefstaende der ESTEC gegeben. Die Erfahrungen, die in unterschiedlichen geographischen Gebieten und unterschiedlichen Bereichen der Technik gemacht wurden werden verglichen. Es wird gezeigt, wie die EN Normen effizient genutzt werden koennen. (orig.)

  19. Applied chemistry and environmental engineering for engineers. Manual for students and practicians. 2. ed.; Angewandte Chemie und Umwelttechnik fuer Ingenieure. Handbuch fuer Studium und betriebliche Praxis

    Energy Technology Data Exchange (ETDEWEB)

    Fessmann, J.; Orth, H.

    2002-07-01

    This is a practically oriented textbook for chemistry and environmental protection training of students of mechanical engineering, vehicle engineering, electrical engineering, space HVAc engineering etc. Students are also given useful information on the practical applications of chemistry and on environmental protection in industrial practice. The book also contains problem solutions for managing engineers in organizations of the metal and electrical branch who are confronted with chemical problems in chemical engineering, quality assurance, industrial safety and environmental protection. [German] Das Handbuch vermittelt in konzentrierter Form die Grundlagen der Chemie und Umwelttechnik und schlaegt rasch die Bruecke zur industriellen Anwendung bevorzugt in der Metall- und Elektroindustrie. Das Handbuch ist ein praxisorientiertes Lehrbuch fuer die Chemie- und Umweltschutzausbildung von Ingenieurstudenten der Fachrichtungen Maschinenbau, Fahrzeugtechnik, Elektrotechnik, Versorgungstechnik u.a. Darueberhinaus finden Schueler von Chemieleistungskursen an Gymnasien oder Chemiestudenten an Fachhochschulen oder Universitaeten viele nuetzliche Informationen ueber die Anwendungen von Chemie und Umweltschutz in der industriellen Praxis. Nicht zuletzt enthaelt das Buch Problemloesungen fuer Betriebsingenieure, insbesondere aus dem Bereich der Metall- und Elektrobranche, die mit chemischen Fragestellungen in der Verfahrenstechnik, Qualitaetssicherung oder Arbeits-/Umweltschutzueberwachung konfrontiert sind. (orig.)

  20. First robotized assembly line in for multivalve cylinder heads in Europe; Erste roborterautomatisierte Montagelinie fuer Mehrventilzylinderkoepfe in Europa

    Energy Technology Data Exchange (ETDEWEB)

    Simonis, G. [ABB Flexible Automation GmbH, Langenfeld (Germany)

    1996-12-31

    From its earliest days the automotive industry has pioneered the automation of factory operations. This reputation is being added to by yet another new development in the assembly area. The trendsetter is ABB Flexible Automation GmbH, based in Butzbach, Germany, which has developed a future-oriented concept for vehicle engine assembly in which jointed-arm robots play a key role. The new concept has been adopted for Europe`s first robotized assembly line for multivalve cylinder heads, installed by ABB for the German carmaker Audi in Gyoer, Hungary. (orig.) [Deutsch] Die Automobilindustrie war und ist Vorreiter in der Automatisierung betrieblicher Ablaeufe. Einmal mehr zeigt sich dies im Montagebereich. Trendsetter ist hier die ABB Flexible Automation GmbH, Butzbach/Deutschland, die fuer die Montage von Fahrzeugaggregaten ein zukunftweisendes Konzept entwickelt hat. Gelenkarmroboter spielen dabei eine entscheidende Rolle. Ein Beispiel dafuer: Die erste roboterautomatisierte Montageanlage fuer Mehrventilzylinderkoepfe in Europa, die ABB fuer den Automobilhersteller Audi im ungarischen Gyoer realisiert hat. (orig.)

  1. Combined expander-compressor for carbon dioxide in free piston design; Kombinierte Expansions-Kompressions-Maschine fuer Kohlendioxid in Freikolbenbauweise

    Energy Technology Data Exchange (ETDEWEB)

    Heyl, P.; Quack, H. [TU, Dresden (Germany). Lehrstuhl fuer Kaelte- und Kryotechnik; Kuehne, M. [TU, Dresden (Germany). Lehrstuhl fuer Pumpen, Verdichter und Apparate

    2000-03-01

    The renaissance of carbon dioxide in refrigeration engineering is impressive. The contribution shows that the disadvantages of this refrigerating fluid can be compensated by modifying the refrigeration circuit. A combined expander-compressor working by the free piston principle and developed at Dresden Technical University is described. [German] Kohlendioxid erlebt im Bereich der Kaeltetechnik infolge der schwierigen Suche nach umweltvertraeglichen Ersatzkaeltemitteln fuer die Fluorchlorkohlenwasserstoffe eine beeindruckende Renaissance. Es soll anhand thermodynamischer Prozessberechnungen gezeigt werden, dass durch die Modifikation des Kreisprozesses unter Beachtung der besonderen thermodynamischen Eigenschaften des Kohlendioxids diese Nachteile bereits bei der theoretischen Leistungszahl ausgeglichen werden koennen. Dafuer wird das Kohlendioxid in einem Prozess mit zweistufiger Verdichtung arbeitsleistend entspannt. Die Besonderheit dieses Prozesses ist die Verwendung einer speziell fuer diesen Anwendungsfall entwickelten Maschine, die die gewonnene Expansionsarbeit direkt fuer die Verdichtung des Kohlendioxids in der zweiten Verdichtungsstufe nutzt. Es handelt sich dabei um eine nach dem Freikolbenprinzip arbeitende Expansions-Kompressions-Maschine, die an der TU Dresden entwickelt und gegenwaertig getestet wird. (orig.)

  2. Surface and interfacial reaction study of half cycle atomic layer deposited HfO{sub 2} on chemically treated GaSb surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Zhernokletov, D. M. [Department of Physics, University of Texas at Dallas, Richardson, Texas 75080 (United States); Dong, H.; Brennan, B.; Kim, J. [Department of Materials Science and Engineering, University of Texas at Dallas, Richardson, Texas 75080 (United States); Yakimov, M.; Tokranov, V.; Oktyabrsky, S. [College of Nanoscale Science and Engineering, University at Albany - SUNY, Albany, New York 12203 (United States); Wallace, R. M. [Department of Physics, University of Texas at Dallas, Richardson, Texas 75080 (United States); Department of Materials Science and Engineering, University of Texas at Dallas, Richardson, Texas 75080 (United States)

    2013-04-01

    An in situ half-cycle atomic layer deposition/X-ray photoelectron spectroscopy (XPS) study was conducted in order to investigate the evolution of the HfO{sub 2} dielectric interface with GaSb(100) surfaces after sulfur passivation and HCl etching, designed to remove the native oxides. With the first pulses of tetrakis(dimethylamido)hafnium(IV) and water, a decrease in the concentration of antimony oxide states present on the HCl-etched surface is observed, while antimony sulfur states diminished below the XPS detection limit on sulfur passivated surface. An increase in the amount of gallium oxide/sulfide is seen, suggesting oxygen or sulfur transfers from antimony to gallium during antimony oxides/sulfides decomposition.

  3. Solar thermal power plants for the Mediterranean region: A chance for a new era in the field of electricity supply; Solarthermische Kraftwerke fuer den Mittelmeerraum: Chance fuer eine neue Aera der Elektrizitaetsversorgung

    Energy Technology Data Exchange (ETDEWEB)

    Nitsch, J [DLR, Stuttgart (Germany)

    1994-12-31

    One promising option for a really environmentally and climaticly friendly electricity supply is the erection of solar thermal power plants in regions of the earth with a considerably high solar irradiation. In this work the technical and economical chances for this technology are analysed and explanations are given as to which energetic and econmic marginal conditions must be created for a successful market introduction, which could already be initiated with several demonstration power plants. (orig.) [Deutsch] Eine der vielversprechenden Optionen fuer wirklich umwelt- und klimafreundliche Elektrizitaetsversorgung stellt der Bau solarthermischer Kraftwerke in den einstrahlungsreichen Regionen der Erde dar. Der Beitrag analysiert die technisch-oekonomischen Chancen dieser Technologie und zeigt auf, welche energiewirtschaftlichen Randbedingungen als Voraussetzung fuer eine erfolgreiche Markteinfuehrung geschaffen werden muessen, die schon jetzt mit einer Reihe von Demonstrationskraftwerken beginnen koennte. (orig.)

  4. Excitation power dependence of photoluminescence spectra of GaSb type-II quantum dots in GaAs grown by droplet epitaxy

    Energy Technology Data Exchange (ETDEWEB)

    Kawazu, T., E-mail: KAWAZU.Takuya@nims.go.jp; Noda, T.; Sakuma, Y. [National Institute for Materials Science, 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047 (Japan); Sakaki, H. [National Institute for Materials Science, 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047 (Japan); Toyota Technological Institute, 2-12-1 Hisakata, Tempaku-ku, Nagoya 468-8511 (Japan)

    2016-04-15

    We investigated the excitation power P dependence of photoluminescence (PL) spectra of GaSb type-II quantum dots (QDs) in GaAs grown by droplet epitaxy. We prepared two QD samples annealed at slightly different temperatures (380 {sup o}C and 400 {sup o}C) and carried out PL measurements. The 20 {sup o}C increase of the annealing temperature leads to (1) about 140 and 60 times stronger wetting layer (WL) luminescence at low and high P, (2) about 45% large energy shift of QD luminescence with P, and (3) the different P dependence of the PL intensity ratio between the QD and the WL. These differences of the PL characteristics are explained by the effects of the WL.

  5. Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS). Annual report 2010/2011

    International Nuclear Information System (INIS)

    2011-01-01

    The annual report 2010/11 of the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) covers the following topics: organization, corporate development and public relations; reactor accident in Fukushima; Projects and work priorities (reactor safety; waste management; radiation and environmental protection; international projects); project management and project support; equity participations and subsidiaries (RISKAUDIT IRSN/GRS International; institute for safety technologies (ISTec), European Nuclear Safety Training and Tutoring Institute (ENSTTI)).

  6. Neoplastic lesions of the temporomandibular joint (TMJ): diagnosis, differential diagnosis and intervention; Neoplasien des Temporomandibulargelenks (TMG). Diagnostik, Differenzialdiagnostik und Intervention

    Energy Technology Data Exchange (ETDEWEB)

    Vogl, T.J.; Abolmaali, N.; Schedel, H.; Bergh, B. [Frankfurt Univ. (Germany). Inst. fuer Diagnostische und Interventionelle Radiologie; Maeurer, J. [Radiologische Praxis am Prinzregentenplatz, Muenchen (Germany)

    2001-09-01

    Purpose. To evaluate the effectiveness of diagnostic and interventional radiological techniques for neoplastic lesions of the temporomandibular joint (TMJ). Material and methods. Modern diagnosis of the TMJ is based on the clinical use of conventional X-ray techniques, computed tomography (CT), magnetic resonance imaging (MRI) and interventional techniques like biopsies, vascular occlusion and ablation. Results. Conventional X-ray still forms the basic diagnostic procedure applied in open and closed mouth position. CT improves the diagnostic information and serves as the standard diagnostical instrument for cartaliganeous or osseous neoplastic lesions. MRI evaluates soft tissue infiltration in multiplanar techniques and high spatial resolution. Interventional vascular and ablative techniques improve the treatment of neoplastic disorders. (orig.) [German] Zielsetzung. Vorstellung der Wertigkeit bildgebender Verfahren fuer die diagnostische und interventionelle Radiologie des Temporomandibulargelenks (TMG). Material und Methodik. Die moderne Radiologie des TMG basiert auf dem Einsatz der konventionellen Roentgendiagnostik, der Computertomographie (CT) und der Magnetresonanztomographie (MRT), sowie interventioneller Verfahren wie der Biopsie, vaskulaerer Embolisationsverfahren und tumorablativer Verfahren. Ergebnisse. Als Basisdiagnostik dient die konventionelle Diagnostik in offener und geschlossener Mundposition der Erfassung von Funktionsstoerungen sowie ossaerer Destruktionen. Die CT erweitert das diagnostische Spektrum und verbessert die Differenzialdiagnostik fuer ossifizierende Prozesse. Der Einsatz der MRT erlaubt die Erfassung der Weichteilinfiltration sowie der Gelenkstrukturen. Vaskulaere interventionelle Verfahren dienen der praetherapeutischen Okklusion bzw. der palliativen Tumortherapie in Form der okklusiven Embolisation, der Chemoembolisation, oder auch der Tumorablation. (orig.)

  7. Solar customers and how to acquire them; Wer ist unser Solarkunde und wie koennen wir ihn gewinnen?

    Energy Technology Data Exchange (ETDEWEB)

    Schmitz, W. [Walter Schmitz Marketingberatung, Duesseldorf (Germany)

    2003-07-01

    In May 2002 the new Initiative Solarwaerme Plus was founded in Berlin. In comparison to former activities, this one was not intended as a broad public campaign but a focused marketing project which should help local plumbers to sell more 'Solarwaerme-Anlagen'. The Initiative Solarwaerme Plus started it's activities with two basic marketing research surveys to explore what German consumers and house owners think about thermal solar energy. These two surveys, based on most developed market research methods, achieved lots of new 'know how', which helps the initiative to developed tailor-made information and advertising material. Initiative's marketing people learned that owners of thermal solar energy devices were not mainly motivated by ecological means, but fascinated about the amount of warm water, such a device delivers. (orig.) [German] Im Mai 2002 wurde die neue Initiative Solarwaerme Plus gegruendet. Diese Initiative sollte keine gesellschaftliche Informationskampagne werden, sondern ein konkretes Marketingprojekt, um den Verkauf von Solarwaerme-Anlagen zu foerdern. Ziele der Initiative sind zum Beispiel: (a) Solarwaerme-Anlagen sollen zum selbstverstaendlichen 'Standard' bei der Heizungsmodernisierung werden - nicht nur fuer oekologisch Motivierte, sondern fuer 'Jedermann'. (b) Mittelfristig soll die Abhaengigkeit von der staatlichen Foerderung abgebaut werden. Modernes Marketing basiert jedoch ganz wesentlich auf einer fundierten Datenbasis ueber den Verbraucher. Also wurde seinerzeit beschlossen, mittels Marktforschung eine solche Datenbasis zu beschaffen. (orig.)

  8. The stuff of enlightening diagnoses; Stoff fuer erhellende Diagnosen

    Energy Technology Data Exchange (ETDEWEB)

    Huebner, Karl

    2017-07-01

    Doctors today already frequently rely on positron emission tomography - PET for short - in cancer diagnostics. However, in order to use this method for other diseases, too, they need suitable tracer substances containing radioactive fluorine-18 - a challenge for Tobias Ritter and his team at the Max Planck Institut fuer Kohlenforschung in Muelheim an der Ruhr. The chemists are searching for ways to label diverse molecules with fluorine-18 and thus expand the range of possibilities for medical specialists.

  9. Driver assistance - Firstly a contribution to primary safety or rather to comfort?; Fahrerassistenz primaer zum Komfort oder fuer die Sicherheit?

    Energy Technology Data Exchange (ETDEWEB)

    Bubb, H. [TU Muenchen, Garching (Germany). Lehrstuhl fuer Ergonomie

    2003-07-01

    Doubtless assistance systems should contribute to the safety of car driving. They support simultaneously a comfortable use of the car. Especially the operation comfort is characterised by clarity, self explaining, robustness against errors, and so on. Operation comfort doesn't give an inessential contribution to a reliable and appropriate interaction between driver and vehicle that means also a contribution to a reliable function of the total system and thereby to safety. Therefore the subjective experience of assistance systems is of excellent importance with view on the subjective and public confidence in new assistance systems. Are they seen rather as a gain of comfort, as it is preferred by the producer by reasons of production related liability, or as an easing of the driver's behaviour providing safety? Consists in the last called tendency a new kind of danger? In this connection juristic problems may not be unmentioned. The driver may not or not completely be called to account for procedures on which he has no influence or thinks to have no influence. In this case the account for the not compensated damage is contributed to the producer of the system. Therefore, by considering human characteristics and abilities of the driver during the development of assistance systems unwanted juristic consequences should be prevented. (orig.) [German] Assitenzsysteme sollen zweifellos einen Beitrag fuer die Sicherheit des Autofahrers liefern. Zugleich dienen sie aber auch fuer eine komfortable Nutzung des Fahrzeugs. Speziell der Bedienkomfort ist durch leichte Verstaendlichkeit, Selbsterklaerbarkeit, Fehlerrobustheit u.ae. charakterisiert. Durch ihn wird ein nicht unwesentlicher Beitrag zur sicheren und zweckdienlichen Interaktion zwischen Fahrer und Fahrzeug geleistet, also auch ein Beitrag fuer die zuverlaessige Funktion des Systems und damit fuer die Sicherheit. Von herausragender Bedeutung insbesondere im Hinblick auf das subjektive und das oeffentliche

  10. Energy price report for Baden-Wuerttemberg 2016. Final report; Energiepreisbericht fuer Baden-Wuerttemberg 2016. Endbericht

    Energy Technology Data Exchange (ETDEWEB)

    Guel, Sarah; Cherkasky, Jenny

    2017-05-19

    This report describes the historical development of energy prices in recent years up to and including 2016 in Germany and Baden-Wuerttemberg and estimates the future development until 2023. The report addresses the markets for oil, gas, electricity and heat, which are summarized below. In addition, an estimate of the energy costs for households and industry and the associated burden is made. [German] Der vorliegende Bericht beschreibt die historische Entwicklung der Energiepreise der letzten Jahre bis einschliesslich 2016 in Deutschland und in Baden-Wuerttemberg und schaetzt die zukuenftige Entwicklung bis 2023 ab. Dabei geht der Bericht auf die Maerkte fuer Oel, Gas, Strom und Waerme ein, welche im Folgenden zusammengefasst werden. Zudem wird eine Abschaetzung der Energiekosten fuer Haushalte und Industrie und der damit verbundenen Belastung vorgenommen.

  11. Assessment of technical risks and energy consumption of processes for regeneration of polluted land; Abschaetzung von technischem Risiko und Energiebedarf bei Sanierungsmassnahmen fuer Altlasten

    Energy Technology Data Exchange (ETDEWEB)

    Trappmann, F.

    1997-04-01

    In case of sensitive use of a site or its surroundings further consideration on pre-elevated remedial action designs should be undertaken. The generated method for the assessment of technical risks and energy consumption intends to enable different users with smaller or broader specialist knowledge to handle the problem. Basic instrument for the variation of intensity of handling is to divide the technical process in a special way into small elements, called module. With regard to the processing line and to the complexity of the process the modules are connected on different levels according to their common function. The levels handled by experts are called detailed risks assessment, the abridged kind of handling is especially for authorities. For some types of contaminations and some technologies are tools and lists available to enable an easier treatment. Generally the method and the tools are employable for other sites too. For the comparative assimilating assessment itself verbal argumentation is used to describe the causes, that modules are identified as weak (in comparison). The result of the consideration is a ranking of the prefered applied technologies rated by energy consumption and technical risks or a demand for special improvements in the case of commissioning. (orig.) [Deutsch] Die vorliegende Dissertation konzentriert sich auf die weitergehende Risiko- und Energiebetrachtung weniger, zuvor mittels strukturierter Auswahlverfahren favorisierter Sanierungsszenarien. Zwecks effizienter Ausnutzung verfuegbarer Finanzmittel erscheint es angemessen, die bislang in ihrer Gesamtheit betrachteten Verfahrensschritte intern eingehender zu untersuchen und potentielle Risiken bewertbar zu machen. Die geschilderte Vorgehensweise basiert auf der Untergliederung komplexer Sanierungsszenarien in einzelne Elemente (Moduln etc.) gemaess dem funktionalen Zusammenwirken und dem Verfahrensablauf. Fuer einzelne Moduln koennen im Rahmen detaillierterer Betrachtungen

  12. Concepts for `superior process control` in the energy industry; Konzepte fuer die uebergeordnete Prozessfuehrung in der Energiewirtschaft

    Energy Technology Data Exchange (ETDEWEB)

    Doellen, U.C. von

    1996-12-01

    The work concerns the task of control described as dispatching of extensive energy supply and distribution networks. Due to the special contractual situation, there are special long-term targets in firms, which must be achieved in addition to the extensive operational tasks of control and monitoring of the networks. The concepts introduced in the work offer a framework for a target-orientated design of computer-aided menus for this superior process control in the energy industry. (orig./GL) [Deutsch] Die Arbeit betrachtet die als Dispatching bezeichnete Aufgabe der Fuehrung ausgedehnter Energieversorgungs- und verteilungsnetze. Aus den speziellen Vertragssituationen ergeben sich in den Unternehmen besondere, langfristige Zielvorgaben an die mit der Betriebsfuehrung beauftragen Operateure, die zusaetzlich zu den umfangreichen operativen Aufgaben der Fuehrung und Ueberwachung der Netze zu erreichen sind. Die in der Arbeit vorgestellten Konzepte bieten den Rahmen fuer einen zielgerichteten Entwurf rechnergestuetzter Hilfsmittel fuer diese uebergeordnete Prozessfuehrung in der Energiewirtschaft. Das erstellte Gesamtsystem wird abschliessend zur Loesung einer konkreten, energiewirtschaftlichen Problemstellung eingesetzt. Die entwickelte Anwendungsloesung wird als Hilfsmittel fuer die technische und vertragliche Optimierung im Dispatching eingesetzt. Wesentliche Zielsetzung ist ein technisch und wirtschaftlich optimaler Einsatz von Energiespeichern zur Deckung von Spitzenlasten. (orig./GL)

  13. Double-layer capacitors as dynamic stores for PV applications. Final report; Doppelschichtkondensatoren als dynamische Speicher fuer PV-Anwendungen. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Willer, B.; Knorr, R.; Broeker, C.; Burger, B.; Wollny, M.

    1999-07-01

    Double layer capacitors are the system of choice whenever a large number of cycles and high capacity are required. They have the advantages of high cyclic strength, high capacity, freedom of servicing, insensitivity to high temperatures and long life. Drawbacks are low energy density, high self-discharge and high cost.Applications in water pumps, pathfinders and roller blind control systems were investigated. [German] Mit den Ergebnissen steht ein detailliertes Wissen ueber den weltweiten Entwicklungsstand und die physikalischen Eigenschaften von Doppelschichtkondensatoren zur Verfuegung. Ihre Eigenschaften wurden in Bezug auf moegliche photovoltaische Anwendungen hin analysiert. Anwendungsfehlder ergeben sich vorzugsweise dann, wenn hohe Zyklenzahl und Leistungsfaehigkeit gefordert werden. Die Vorteile des neuen Energiespeichers sind seine hohe Zyklenfestigkeit und Leistungsfaehigkeit, seine Wartungsfreiheit, Temperaturunempfindlichkeit und lange Lebensdauer. Ihnen stehen die Nachteile einer geringen Energiedichte, hohen Selbstentladung und hoher Kosten gegenueber. Eine deutliche Steigerung der Gesamteffizienz von photovoltaischen Versorgungseinheiten beim Einsatz von Doppelschichtkondensatoren ergeben energetische Simulationen unterschiedlicher Systeme. Fuer ausgewaehlte photovoltaisch versorgte Anwendungen konnte die Einsatzfaehigkeit von Doppelschichtkondensatoren in Feldtests erprobt und nachgewiesen werden. Wasserpumpensysteme, Pathfinders und eine Rolladensteuerung fuer ein Fenster wurden getestet. Der Einsatz von Doppelschichtkondensatoren zur weiteren Verbreitung photovoltaischer Anwendungen ist bereits heute fuer spezielle Anwendungen sinnvoll und wirtschaftlich. Mit weiter fallenden Preisen fuer die Kondensatoren und der Entwicklung von Kondensatorsystemen mit hoeheren Spannungen werden weitere Anwendungsfelder hinzukommen. Die Basis zur Entwicklung der notwendigen Systemtechnik und ihrer Demonstration in Feldversuchen ist durch die Ergebnisse des

  14. Improved GaSb surfaces using a (NH4)2S/(NH4)2S04 solution

    International Nuclear Information System (INIS)

    Murape, D.M.; Eassa, N.; Nyamhere, C.; Neethling, J.H.; Betz, R.; Coetsee, E.; Swart, H.C.; Botha, J.R.; Venter, A.

    2012-01-01

    Bulk (1 0 0) n-GaSb surfaces have been treated with a sulphur based solution ((NH 4 ) 2 S/(NH 4 ) 2 SO 4 ) to which sulphur has been added, not previously reported for the passivation of GaSb surfaces. Au/n-GaSb Schottky barrier diodes (SBDs) fabricated on the treated material show significant improvement compared to that of the similar SBDs on the as-received material as evidenced by the lower ideality factor (n), higher barrier height (φ b ) and lower contact resistance obtained. Additionally, the reverse leakage current, although not saturating, has been reduced by almost an order of magnitude at −0.2 V. The sample surfaces were studied by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The native oxide, Sb–O, present on the as-received material is effectively removed on treating with ([(NH 4 ) 2 S/(NH 4 ) 2 SO 4 ]+S) and (NH 4 ) 2 S. Analysis of the as-received surface by XPS, prior to and after argon sputtering, suggests that the native oxide layer is ≤8.5 nm.

  15. Integrated energy data solution for energy markets of Europe: Energy Data Warehouse; Integrierte Energiedatenloesung fuer Europas Energiemaerkte: Energy Data Warehouse

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2001-07-01

    According to Ralf Hoffmann, head of the sales department of Goerlitz Computerbau AG, integrated problem solutions for Europe's new energy markets must be developed fast, without delay and with all efforts available. [German] 'Integrierte Problemloesungen fuer Europas neue Energiemaerkte muessen schnell und investitionssicher fuer die Anwender realisiert werden. Sie dulden keinen Aufschub. Alle unternehmerische Kraft muss und wird in die Befriedigung dieser Anforderungen gelegt.' So aeussert sich der Vorstand Absatzwirtschaft der Goerlitz Computerbau AG, Ralf Hoffmann. (orig.)

  16. A teststand for photo detectors and beamtests for ILC polarimetry; Aufbau eines Teststandes fuer Photodetektoren und Teststrahlmessungen fuer die Strahlpolarisationsmessung am ILC

    Energy Technology Data Exchange (ETDEWEB)

    Velte, Ulrich

    2009-02-15

    -Lichts charakterisiert und auf ihre Eignung fuer die spezielle Anwendung im ILC-Polarimeter ueberprueft werden koennen. Die bislang beste Polarisationsmessung wurde im Rahmen des SLD-Experimentes am SLAC in Kalifornien erreicht ({delta}P/P{approx}0.5%). Zur Zeit befindet sich der Cerenkov-Detektor des SLD-Polarimeters am DESY und wird dort benutzt, um verschiedene fuer die ILC-Polarimetrie in Frage kommende Photodetektoren im Teststrahl zu vermessen. Um an die Erfahrungen aus dem SLD-Experiment anknuepfen zu koennen, werden im Rahmen dieser Arbeit Teststrahlmessungen am Cerenkov-Detektor, ausgewertet und die ersten Entwicklungen hin zu einem Polarimeter fuer den ILC beschrieben. (orig.)

  17. Dimensioning and design rules for sliding bearings; optimisation problems; Bemessungs- und Gestaltungsregeln fuer Gleitlager: Optimierungsfragen

    Energy Technology Data Exchange (ETDEWEB)

    Spiegel, K. [Fachhochschule Duesseldorf (Germany); Fricke, J.

    2000-07-01

    Already in the design stage of sliding bearings, optimal conditions for operation at a later stage should be envisaged. The contribution presents hints for optimal design and calculation of radial and axial bearings, e.g. gap design, optimised supporting strength, friction loss and lubricant throughput, lubricant exchange and lubricant heat exchange, and improved control of internal lubricant flow. [German] Bei der Auslegung von Gleitlagern ist es von Interesse, moeglichst optimale Bedingungen fuer den spaeteren Betrieb zu schaffen. Im vorliegenden Beitrag werden einige bereits bekannte und auch neue Hinweise zur optimalen Gestaltung und Berechnung, sowohl fuer Radial- als auch Axiallager gegeben. Dies betreffen im wesentlichen: die Gestaltung des Spaltverlaufs, Empfehlungen zur Optimierung der Tragfaehigkeit, der Reibungsverluste und des Schmierstoffdurchsatzes, Hinweise zum Schmierstoff- bzw. Schmierstoff-Waermeaustausch und die Verbesserung der inneren Schmierstofffuehrung. (orig.)

  18. The Chernobyl reactor accident, ten years on. Teaching projects for mathematics instruction in interdisciplinary working groups; 10 Jahre nach Tschernobyl. Unterrichtsprojekte fuer den Mathematikunterricht in faecheruebergreifenden Kooperationen

    Energy Technology Data Exchange (ETDEWEB)

    Boer, H. [comp.; Delle, E. [comp.; Mies, K. [comp.; Warmeling, A. [comp.

    1996-10-01

    The booklet presents background information and addresses the following aspects: ionizing radiation and radiation effects; safety of German nuclear power plants; statistical evidence of radiation injuries; short-lived and long-lived ionizing radiation; radioactive waste; CO{sub 2} emissions as an argument in favour of nuclear power generation. The material presented is intended for use by a school project team interested in the subjects, or as a basis for collaborative, interdisciplinary teaching in working groups, and it offers information and problems for mathematics teaching. (HP) [Deutsch] Neben vielen Informationen behandelt die Broschuere: Strahlen und Strahlenwirkungen; Sicherheit deutscher Kernkraftwerke; statistischer Nachweis von Strahlenschaeden; Kurz- und Langfestigkeit der Strahlenbelastung; radioaktiver Abfall; CO{sub 2}-Problematik als Argument fuer die Kernenergie. Die Broschuere ist gedacht z.B. fuer eine Projektgruppe, einen Projekttag, fuer eine Lerngruppe in faecheruebergreifender Kooperation. Die Materialien sind ausgearbeitet fuer die Themembearbeitung im Mathematikunterricht mit Uebungsaufgaben. (HP)

  19. Feasibility study for new ecolabels according to ISO 14024 (type I) within the product group: small cogeneration plants; Machbarkeitsstudie fuer neue Umweltzeichen in Anlehnung an ISO 14024 (Type I) fuer die Produktgruppe: Kleine Blockheizkraftwerk-Module

    Energy Technology Data Exchange (ETDEWEB)

    Hoffmann, E.; Hirschl, B.; Kaliske, J. [Institut fuer Oekologische Wirtschaftsforschung (IOEW) gGmbH, Berlin (Germany); Reese, I.; Grimpe, T. [Hamburg Gas Consult (HGC) GmbH (Germany)

    2000-11-02

    available data, it is not possible at the moment to derive concrete criteria for an ecolabel in this field. After the introduction of initial products onto the market, corresponding requirements for plants based on this new technology should be specified. (orig.) [German] Beim vorliegenden Gutachten handelt es sich um eine Machbarkeitsstudie nach ISO 14024. Es behandelt die Frage, ob ein Umweltzeichen fuer kleine BHKW-Module gerechtfertigt ist, und welche Anforderungen diese im Vergabefall erfuellen sollten. Im Rahmen der Untersuchung wurde zunaechst eine umfassende Marktanalyse durchgefuehrt, um daraus die Anlagen zu identifizieren, die fuer ein Umweltzeichen in Frage kommen. Im Hauptteil der Studie ging es um die vertiefende Analyse der Umweltrelevanz der ausgewaehlten Anlagen. Hierzu wurde eine Herstellerbefragung durchgefuehrt und ausgeaehlte BHKW anhand eines Systemvergleiches mit Gas- und Oelheizkesseln verglichen. Auf der Basis dieser Analyse wurden Anforderungskataloge fuer Gas- und Diesel-BHKW-Module abgeleitet, die in einem Fachgespraech in einer breiten Runde von Experten und Herstellern vorgestellt und diskutiert wurden. Aus der Studie und dem Fachgespraech konnte ein deutliches Votum fuer ein Umweltzeichen fuer die untersuchten BHWK-Module abgeleitet werden. Die vorgeschlagenen Vergabegrundlagen umfassen Anforderungen an Richtlinienkonformitaet, rationelle Energienutzung (Elektrischer und Gesamtwirkungsgrad bei Nennlast und Teillast, Angabe des Hilfsstrombedarfes), Emissionswerte von CO, NO{sub x}, Staub und organischen Stoffen, Schallemissionen, Angebot von Wartungsvertraegen, Ruecknahmeverpflichtung sowie Anforderungen an die Bedienungsanleitung. Als moegliche Umschrift eines Zeichens fuer kleine BHKW-Module wird empfohlen: 'Umweltzeichen... weil energieefizient'. Neben motorischen BHKW wurden auch kleine Brennstoffzellen-BHKW untersucht. Diese befinden sich zur Zeit noch in einer Feldtest- und Erprobungsphase. Sie weisen deutliche oekologische

  20. Research for the thermal change. Contributions; Forschung fuer die Waermewende. Beitraege

    Energy Technology Data Exchange (ETDEWEB)

    Szczepanski, Petra; Wunschick, Franziska; Martin, Niklas (comps.)

    2016-05-15

    The energy transition in the heating sector is not a sure-fire success and it is too slow. This is alarming since the heating / cooling sector is responsible for more than half of the final energy demand. That the ''thermal change'' has accelerated hardly despite many efforts by politics, industry and research in recent years, is the reason for the scientists the FVEE institutes to examine the perspectives of renewable energy and the need to increase efficiency in the heating sector systematically. therefore FVEE-2015 Annual Meeting, is entitled ''Research for the thermal change''. The contributions of this conference proceedings present the latest research results and show ways to implement the heat change technically, economically and politically. They are dedicated to the drivers, but also the barriers of heat change. The authors report on innovative projects to provide buildings with heat from geothermal energy, biomass and solar thermal energy. Several contributions are dedicated to the application of efficient components, such as thermal insulation, thermal storage and heat pumps. [German] Die Energiewende im Waermesektor ist kein Selbstlaeufer und kommt zu langsam voran. Das ist alarmierend, da der Waerme-/Kaeltesektor fuer ueber die Haelfte des Endenergiebedarfs verantwortlich ist. Dass die ''Waermewende'' trotz vielerlei Bemuehungen von Politik, Industrie und Forschung in den letzten Jahren kaum Fahrt aufgenommen hat, ist Anlass fuer die Wissenschaftlerinnen und Wissenschaftler der FVEE-Institute, die Perspektiven der erneuerbaren Energien und der notwendigen Effizienzsteigerung im Waermesektor systematisch zu untersuchen. Die FVEE-Jahrestagung 2015 steht deshalb unter dem Leitthema ''Forschung fuer die Waermewende''. Die Beitraege dieses Tagungsbandes praesentieren aktuelle Forschungsergebnisse und zeigen Wege auf, um die Waermewende technisch, wirtschaftlich und politisch

  1. GaSb quantum rings in GaAs/Al{sub x}Ga{sub 1−x}As quantum wells

    Energy Technology Data Exchange (ETDEWEB)

    Hodgson, P. D., E-mail: pdhodgson@hotmail.co.uk; Hayne, M.; Robson, A. J.; Zhuang, Q. D. [Department of Physics, Lancaster University, Lancaster LA1 4YB (United Kingdom); Danos, L. [Department of Chemistry, Lancaster University, Lancaster LA1 4YB (United Kingdom)

    2016-01-28

    We report the results of continuous and time-resolved photoluminescence measurements on type-II GaSb quantum rings embedded within GaAs/Al{sub x}Ga{sub 1−x}As quantum wells. A range of samples were grown with different well widths, compensation-doping concentrations within the wells, and number of quantum-ring layers. We find that each of these variants have no discernible effect on the radiative recombination, except for the very narrowest (5 nm) quantum well. In contrast, single-particle numerical simulations of the sample predict changes in photoluminescence energy of up to 200 meV. This remarkable difference is explained by the strong Coulomb binding of electrons to rings that are multiply charged with holes. The resilience of the emission to compensation doping indicates that multiple hole occupancy of the quantum rings is required for efficient carrier recombination, regardless of whether these holes come from doping or excitation.

  2. Knitted structures of endless fibers for gas cleaning. Pt. 2; Gestrickte Strukturen aus Endlosfasern fuer die Abgasreinigung. T. 2

    Energy Technology Data Exchange (ETDEWEB)

    Mayer, A.; Mayer, J.; Wintermantel, E.; Buck, A.; Schmidt, R.M.; Mattes, P.; Sudmanns, H.; Bressler, H.

    1995-07-01

    Knittings based on ceramic filament yarns can be used to clean polluted air and exhaust gas efficiently up to temperatures of 1000 C. They provide interesting properties for the filtration of Diesel particles as well as for catalysis and adsorption of toxic gas components. The special knitting technology can handle any brittle fibers, producing elastic structures, which are thermochoc-resistent and can therefore even be used for preturbo applications. The first part of this paper, published in MTZ 56 (1995) 2 deals with the basic properties of this cleaning medium. This second part concentrates on Diesel particulate trop applications. These new trap and catalyst concepts are under development by Buck/Bondorf with TTM/Niederrohrdorf. Basic research is delegated to ETH Zuerich and Universitaet by Gillet/Edenkoben and, with focus on preturbo-applications by MTU/Friedrichshafen. (orig.) [Deutsch] Gestricke aus keramischen Endlosfasern sind bis zu Temperaturen um 1000 C fuer die Abluft- und Abgasreinigung einsetzbar. Sie eignen sich fuer die Filtration von Dieselpartikeln, insbesondere deren Feinstfraktionen ebenso wie fuer die Katalyse und fuer die Adsorption gasfoermiger Schadstoffkomponenten. Die Strukturen sind volumenelastisch, unempfindlich gegen Thermoschock und daher auch im motornahen Bereich risikoarm einsetzbar. In einem ersten Teilbeitrag in der Februarausgabe der MTZ wurden grundlegende Erkenntnisse dieses Abgasreinigungsmediums beschrieben. Der vorliegende zweite Teil beschreibt Anwendungen mit Schwerpunkt Dieselpartikelfilter. Diese neue Fasertechnik wird bei Buck, Bondorf, zusammen mit TTM, Niderrohrdorf, entwickelt. Forschungsarbeiten werden an der ETH Zuerich und der Universitaet Erlangen im Rahmen des BMFT-Projektes 01 VQ 9305/9 durchgefuehrt. Fragen zu motornachgeschalteten Anwendungen untersucht Gillett, Edenkoben, Moeglichkeiten der Motorintegration solcher Filter die MTU Friedrichshafen. (orig.)

  3. Lead-free sliding overplate for highly loaded big end bearings; Bleifreie Laufschicht fuer hochbelastete Haupt- und Pleuellager

    Energy Technology Data Exchange (ETDEWEB)

    Graham, N.; Schnell, L.; Arnold, G. [Federal-Mogul Wiesbaden GmbH and Co. KG (Germany)

    2003-10-01

    Lead has always been an important metal in plain bearing technology. Completely lead-free solutions for high-end engine applications are still not considered to be technically achievable. Therefore, the European End of Life Directive (2000/53/EC), which took effect on 1 July 2003, lists copper-based lead/bronze bearings as an exception. The bearing group of Federal-Mogul has now announced its exit from the lead industry and addresses the issue layer by layer. A recently introduced adaptive bearing offers a lead-free overplate for high-performance internal combustion engine applications. This new bearing changes its technical characteristics during the running-in phase. (orig.) [German] Blei war schon immer eine wichtige Komponente in der Gleitlagertechnik. Bis heute gelten vollstaendig bleifreie Loesungen fuer hochbelastete Gleitlager als technisch nicht machbar. Deshalb nennt die europaeische Altautoverordnung (2000/53/EG), die seit dem 1. Juli 2003 in Kraft ist, als Ausnahme die kupferbasierten Bleibronzelager. Die Gleitlagergruppe von Federal-Mogul hat jetzt ihren Rueckzug aus der Verarbeitung von Blei angekuendigt und geht das Thema Schicht fuer Schicht an. Ein kuerzlich eingefuehrtes, anpassungsfaehiges Lager fuer High-End-Verbrennungsmotoren verfuegt ueber eine bleifreie Laufschicht. Bei diesem neuen Lager veraendern sich die technischen Eigenschaften waehrend der Einlaufphase. (orig.)

  4. UIS Baden-Wuerttemberg. Project AJA. Application of JAVA-based and other efficient solutions in the areas of environment, traffic and administration. Phase V 2004; UIS Baden-Wuerttemberg. Projekt AJA. Anwendung JAVA-basierter und anderer leistungsfaehiger Loesungen in den Bereichen Umwelt, Verkehr und Verwaltung. Phase V 2004

    Energy Technology Data Exchange (ETDEWEB)

    Mayer-Foell, R.; Keitel, A.; Geiger, W. (eds.)

    2004-12-01

    Bundeslaendern die Umsetzung von Verwaltungsreformen - in Baden-Wuerttemberg der Vollzug des Verwaltungsstruktur-Reformgesetzes (VRG) - sowie die Umsetzung von e-Government-Konzepten derzeit zu zusaetzlichen Anforderungen an die Verwaltung und ihre IuK-Technik. Durch den Einsatz innovativer Informationstechnologien kann in vielen Bereichen ein bedeutender Beitrag zur Erfuellung dieser Anforderungen geleistet werden; genannt seien hier Portal-, Content-Management- und Integrations-Technologien sowie neue Techniken fuer den Web-basierten und mobilen Zugriff auf Informationen. Entwicklung uf Pflege der neuen Informations- und Kommunikationssysteme erfordern oft nicht unerhebliche Mittel. Aufgrund der knappen Haushaltslage der Gebietskoerperschaften koennen diese Mittel von den einzelnen zustaendigen Stellen zunehmend nicht mehr aufgebracht werden. Auch wuerden Einzelentwicklungen nicht den Anforderungen zum sparsamen Umgang mit Haushaltsmitteln und groesstmoeglicher Effektivitaet der eingesetzten Mittel entsprechen. Ein wichtiges Mittel, um diese Herausforderung zu bewaeltigen, ist die verstaerkte Zusammenarbeit der Gebietskoerperschaften bei der Entwicklung und Pflege der Informationssysteme. Um die Zusammenarbeit innerhalb des Landes Baden-Wuerttemberg sowie mit dem Bund und anderen Laendern zu foerdern, wurde Ende 1999 das F+E-Projekt AJA (Anwendung JAVA-basierter und anderer leistungsfaehiger Loesungen in den Bereichen Umwelt, Verkehr und Verwaltung) gegruendet. Das Projekt AJA ist im Jahr 2004 in seine fuenfte Phase gegangen und wird mit dieser Phase abgeschlossen. Der vorliegende Bericht ist die Projektdokumentation der Phase V von AJA im Jahr 2004. Er gibt die Aufgabenstellungen und die Ergebnisse der 19 F+E-Arbeiten wieder. (orig.)

  5. Selection of compressors and drives for natural gas storage and transport - technical and economic aspects; Auswahl von Verdichtern und Antriebsmaschinen fuer die Erdgasspeicherung und den Erdgastransport - technische und wirtschaftliche Aspekte

    Energy Technology Data Exchange (ETDEWEB)

    Heyer, F.; Wieke, S. [Heyer und Wieke Engineering, Muenchen (Germany)

    1998-12-31

    Selection of the proper compressor/drive combination is indispensable for optimizing natural gas storage. The contribution presents a comparison of the available systems. (orig.) [Deutsch] Fuer die Verdichtung von Erdgas fuer die Erdgasspeicherung und den Erdgastransport ist die Auswahl der fuer den jeweiligen Anwendungsfall geeigneten Verdichter-Antriebskombination eine wesentliche Voraussetzung fuer einen technisch und wirtschaftlich optimalen Betrieb. Unter Beruecksichtigung des Marktes werden die Varianten (Verdichter-Antriebskombinationen) definiert und in einem technischen Vergleich Vor- und Nachteile der einzelnen Alternativen gegenuebergestellt und bewertet. Die Einhaltung der Betriebsanforderungen und der Anforderungen der TA-Luft und TA-Laerm, der Wirkungsgrad, die Zuverlaessigkeit und Verfuegbarkeit muessen einer besonders intensiven Pruefung und Beurteilung unterzogen werden. Das Ergebnis der vergleichenden Bewertung der Varianten kann eine neue Definition der Varianten oder der Anforderungen notwendig machen. (orig.)

  6. A universal concept for IV-supported operation management; Ein universelles Konzept fuer die IV-gestuetzte Betriebsfuehrung

    Energy Technology Data Exchange (ETDEWEB)

    Sturm, A.

    1997-12-31

    The continuing rise in cost pressure calls for measures for enhancing the efficiency of operation management and maintenance. At the same time it is necessary to maintain the requisite reliability of production and keep abreast of the ever more stringent requirements of working safety and environment protection. This paper presents an integral operation management system for production plants which does justice to both the productive and the and the conserving function of operation management. The development and introduction of this system to conventional power plants has meanwhile begun. The system consistently gives consideration to the fact that operation management depends on processing data and information of different properties. Whereas process data can show strong fluctuations, there are many kinds of information on the plant concerning, for example, plant installations, processes, damage, and maintenance which hardly fluctuate at all or only change over long time periods. These latter include plant and installation addresses, technical data on the system or on maintenance. In operation management systems designed for production plants it can therefore be useful to organise the handling of process data (dynamic data) and plant data (static data) separately. [Deutsch] Der immer staerkere Kostendruck erfordert Massnahmen zur Effizienzsteigerung der Betriebsfuehrung und der Instandhaltung bei Erhaltung der erforderlichen Zuverlaessigkeit der Produktion, steigenden Anforderungen an Arbeitssicherheit und Umweltschutz. Ein Gesamtbetriebsfuehrungssystem, das sowohl die Produktionsfunktion, als auch die Erhaltungsfunktion abdeckt, wurde fuer Produktionsanlagen konzipiert. Fuer konventionelle Kraftwerke wurde die Entwicklung und Einfuehrung begonnen. Dieses System beruecksichtigt konsequent, dass bei der Betriebsfuehrung Daten und Informationen mit unterschiedlichen Eigenschaften zu verarbeiten sind. Waehrend die Prozessdaten hoch fluktuierende Daten sein koennen

  7. Integral energy concepts for housing estates; Integrale Energiekonzepte fuer Wohnsiedlungen

    Energy Technology Data Exchange (ETDEWEB)

    Fisch, M.N.; Kuehl, L. [Technische Univ. Braunschweig (Germany)

    1998-06-01

    Integral energy concepts for housing estates require an early cooperation between architects, planners, and specialist engineers on the basis of a holistic planning approach. This is how future-oriented, sustainable concepts evolve which do justice to the multifarious requirements on the integral energy system of a housing estate. The present paper elucidates different approaches to optimising the energy efficiency of buildings such as the implementation of low-energy house concepts, building site and architectural planning, and detailed planning of heat insulation concepts, ventilation and air tightness concepts, and adapted heating systems. The solarisation of development plans has an influence on the arrangement of buildings, which are now planned to give the greatest possible passive and active solar energy gains. The authors also describe solar-assisted district heating systems for housing estates. [Deutsch] Integrale Energiekonzepte fuer Wohnsiedlungen erfordern die fruehe Zusammenarbeit von Architekten, Planern und Fachingenieuren im Rahmen einer ganzheitlichen Planung. So entstehen zukunftsweisende und tragfaehige Konzepte, die den vielschichtigen Anforderungen des Gesamtenergiesystems ``Wohnsiedlung`` gerecht werden. Im Folgenden wird die energetische Optimierung von Gebaeuden wie die Umsetzung von Niedrigenergiehaus-Konzepten, Standort und Gebaeudeplanung sowie Detailplanung in Bezug auf das Waermedaemmkonzept, Lueftungs-/Dichtheitskonzept und auf angepasste Waermeversorgungssysteme erl autert. Die Solarisierung von Bebauungsplaenen beeinflusste Anordnung der Gebaeude hinsichtlich der Nutzung passivsolarer Gewinne sowie des Einsatzes von Systemen der aktiven Solarenergienutzung. Solarunterstuetzte Nahwaermenetze fuer Wohnsiedlungen werden ebenfalls beschrieben.

  8. Shaft barriers for underground waste repositories in abandoned salt mines. Preparatory project. Vol. 2. Annex; Schachtverschluesse fuer untertaegige Deponien in Salzbergwerken. Vorprojekt. Bd. 2. Anhang

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, M W [GSF - Forschungszentrum fuer Umwelt und Gesundheit, Remlingen (Germany). Forschungsbergwerk Asse; Fruth, R [GSF - Forschungszentrum fuer Umwelt und Gesundheit, Remlingen (Germany). Forschungsbergwerk Asse; Stockmann, N [GSF - Forschungszentrum fuer Umwelt und Gesundheit, Remlingen (Germany). Forschungsbergwerk Asse; Birthler, H [Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH Greece, Braunschweig (Germany). Fachbereich Endlagersicherheitsforschung; Boese, B [Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH Greece, Braunschweig (Germany). Fachbereich Endlagersicherheitsforschung; Storck, R [Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH Greece, Braunschweig (Germany). Fachbereich Endlagersicherheitsforschung; Sitz, P [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Bergbau; Krausse, A [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Bergbau; Eulenberger, K H [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Bergbau; Schleinig, J P [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Bergbau; Duddeck, H [Technische Univ. Braunschweig (Germany). Inst. fuer Statik; Ahrens, H [Technische Univ. Braunschweig (Germany). Inst. fuer Statik; Menzel, W [IfG Inst. fuer Gebirgsmechanik GmbH, Leipzig (Germany); Salzer, K [IfG Inst. fuer Gebirgsmechanik GmbH, Leipzig (Germany); Minkley, W [IfG Inst. fuer Gebirgsmechanik GmbH, Leipzig (Germany); Busche, H [Kali und Salz AG, Kassel (Germany); Lindloff, U [Kali und Salz AG, Kassel (Germany); Gierenz, S [Kali und Salz AG, Kassel (Germany)

    1996-12-31

    This preparatory study, ``Shaft barriers for underground waste repositories in abandoned salt mines``, was to demonstrate the current scientific and technological know-how based on a comprehensive analysis of the barrier design concepts or established structures intended to serve as barriers in abandoned shafts of potash or rock salt mines. Taking as a basis the current regulatory regime and the available know-how on barrier systems in underground waste repositories taken into account so far in plan approval and licensing procedures, as well as the state of the art, concepts are developed as technical guides and models of barrier systems for mine shafts. The required research work for the various components of a shaft barrier is shown, particularly relating to aspects such as materials suitability and technical realisation. Immediate demand for research activities is shown with regard to the available potentials of mathematic and numeric geotechnical and hydrogeologic calculation models required in order to give proof of the long-term workability of shaft barriers. The authors are of the opinion that the following activities are required in order to meet the research demand quantified: (1) Laboratory and bench-scale experiments for determination of the efficiency of various sealing materials and backfilling materials, and (2) an in-situ, large-scale experiment in order to demonstrate the suitability of low-consolidation shotter columns, or constructional technologies. The laboratory work can be done in the facilities of the GSF research mine of Asse, the Freiburg Mining Academy, and the Institut fuer Gebirgsmechanik in Leipzig, and the benchmark experiments also at the Asse site in the research mine. The Kali und Salz Beteiligungs AG is prepared to offer its mine Salzdetfurth II as a site for the large-scale experiment. (orig.) [Deutsch] Im Rahmen der Vorstudie ``Schachtverschluesse fuer Untertagedeponien in Salzbergwerken`` wird ausgehend von einer umfangreichen

  9. Shaft barriers for underground waste repositories in abandoned salt mines. Preparatory project. Vol. 2. Annex; Schachtverschluesse fuer untertaegige Deponien in Salzbergwerken. Vorprojekt. Bd. 2. Anhang

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, M.W. [GSF - Forschungszentrum fuer Umwelt und Gesundheit, Remlingen (Germany). Forschungsbergwerk Asse; Fruth, R. [GSF - Forschungszentrum fuer Umwelt und Gesundheit, Remlingen (Germany). Forschungsbergwerk Asse; Stockmann, N. [GSF - Forschungszentrum fuer Umwelt und Gesundheit, Remlingen (Germany). Forschungsbergwerk Asse; Birthler, H. [Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH Greece, Braunschweig (Germany). Fachbereich Endlagersicherheitsforschung; Boese, B. [Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH Greece, Braunschweig (Germany). Fachbereich Endlagersicherheitsforschung; Storck, R. [Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH Greece, Braunschweig (Germany). Fachbereich Endlagersicherheitsforschung; Sitz, P. [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Bergbau; Krausse, A. [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Bergbau; Eulenberger, K.H. [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Bergbau; Schleinig, J.P. [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Bergbau; Duddeck, H. [Technische Univ. Braunschweig (Germany). Inst. fuer Statik; Ahrens, H. [Technische Univ. Braunschweig (Germany). Inst. fuer Statik; Menzel, W. [IfG Inst. fuer Gebirgsmechanik GmbH, Leipzig (Germany); Salzer, K. [IfG Inst. fuer Gebirgsmechanik GmbH, Leipzig (Germany); Minkley, W. [IfG Inst. fuer Gebirgsmechanik GmbH, Leipzig (Germany); Busche, H. [Kali und Salz AG, Kassel (Germany); Lindloff, U. [Kali und Salz AG, Kassel (Germany); Gierenz, S. [Kali und Salz AG, Kassel (Germany)

    1995-12-31

    This preparatory study, ``Shaft barriers for underground waste repositories in abandoned salt mines``, was to demonstrate the current scientific and technological know-how based on a comprehensive analysis of the barrier design concepts or established structures intended to serve as barriers in abandoned shafts of potash or rock salt mines. Taking as a basis the current regulatory regime and the available know-how on barrier systems in underground waste repositories taken into account so far in plan approval and licensing procedures, as well as the state of the art, concepts are developed as technical guides and models of barrier systems for mine shafts. The required research work for the various components of a shaft barrier is shown, particularly relating to aspects such as materials suitability and technical realisation. Immediate demand for research activities is shown with regard to the available potentials of mathematic and numeric geotechnical and hydrogeologic calculation models required in order to give proof of the long-term workability of shaft barriers. The authors are of the opinion that the following activities are required in order to meet the research demand quantified: (1) Laboratory and bench-scale experiments for determination of the efficiency of various sealing materials and backfilling materials, and (2) an in-situ, large-scale experiment in order to demonstrate the suitability of low-consolidation shotter columns, or constructional technologies. The laboratory work can be done in the facilities of the GSF research mine of Asse, the Freiburg Mining Academy, and the Institut fuer Gebirgsmechanik in Leipzig, and the benchmark experiments also at the Asse site in the research mine. The Kali und Salz Beteiligungs AG is prepared to offer its mine Salzdetfurth II as a site for the large-scale experiment. (orig.) [Deutsch] Im Rahmen der Vorstudie ``Schachtverschluesse fuer Untertagedeponien in Salzbergwerken`` wird ausgehend von einer umfangreichen

  10. Results report on research and development work 1980 of the Institut fuer Nukleare Entsorgungstechnik

    International Nuclear Information System (INIS)

    1981-02-01

    The Institut fuer Nukleare Entsorgungstechnik performs research and development work on the treatment, solidification and final storage of radioactive wastes. The main target of the work is to develop processes and concepts for a safe disposal of radioactive wastes from nuclear plants. The work on waste treatment is carried out within the framework of the reprocessing and waste treatment project. It comprises of the development and characterization of ultimate storable waste products as well as the development of processes for the treatment and solidification of radioactive wastes mainly from reprocessing irradiated nuclear fuels. The studies on the ultimate storage are carried out together with the 'Gesellschaft fuer Strahlen- und Umweltforschung'. Their main concern is the analysis of processes in the neighbourhood of ultimate storage (waste product, packing, filling and immediate surrounding storage medium) for normal and accident conditions and their safety technical optimization. The report is supplemented by a list of publications and lectures of the institute coworkers in 1980. (orig./RB) [de

  11. The Environmental Impact Assessment (EIA) for high-voltage overhead lines; Umweltvertraeglichkeitspruefung (UVP) fuer Hochspannungsfreileitungen

    Energy Technology Data Exchange (ETDEWEB)

    Klockow, S. [Landesentwicklungsgesellschaft Baden-Wuerttemberg, Stuttgart (Germany). Abt. Umwelt

    1996-11-04

    In some of the federal states of Germany the licensing of new or the laying or existing high-voltage overhead lines requires an environmental impact assessment. For many utility companies, however, environmental impact assessments for high-voltage lines are virgin territory. Experience shows that preparing the documentation is not a major problem. Questions usually arise over details such as the calculation of possible incidents or the comparison of different layouts. The authors describes general approaches and strategies and looks at specific problems. (orig.) [Deutsch] Bei der Genehmigung neuer oder der Verlegung vorhandener Hochspannungsfreileitungen ist in einigen Bundeslaendern eine Umweltvertraeglichkeitspruefung durchzufuehren. Fuer viele Energieversorgungsunternehmen ist die Erarbeitung von Umweltvertraeglichkeitsstudien fuer Hochspannungsleitungen aber noch Neuland. Praxiserfahrungen zeigen, dass die Erarbeitung der erforderlichen Unterlagen ohne groessere Schwierigkeiten moeglich ist. Fragen ergeben sich dabei aber bei speziellen Details, z.B. bei der Betrachtung von moeglichen Stoerfaellen oder beim Vergleich von Trassenvarianten. Der Verfasser skizziert das allgemeine Vorgehen und erlaeutert ausfuehrlich die Detailprobleme. (orig.)

  12. Marine environment protection of the North Sea and Baltic Sea. Special report - February 2004; Meeresumweltschutz fuer Nord- und Ostsee. Sondergutachten - Februar 2004

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    The marine environment of the North Sea and Baltic Sea is still heavily polluted. The marine ecosystems are under severe stress from overfishing, water pollution, raw materials production and tourism. Environmental protection in this region necessitates decisive political initiatives and strict corrections especially in fishery policy, agricultural policy and chemical substances control. This is the balance of the special expert opinion of the Council of Environmental Experts. The publication specifies the main problem areas, the current pollution situation, the fields where action is most urgently required - especially in fishery, chemical substances, agricultural and sea travel policies - and presents suggestions for an integrated European and national marine protection policy including a regional development concept for the marine environment. (orig.) [German] Die Meeresumwelt von Nord- und Ostsee ist nach wie vor stark belastet. Ueberfischung, Schadstoffeintraege und Ueberduengung sowie die intensive Nutzung durch Schifffahrt, Rohstoffabbau und Tourismus beeintraechtigen vielfach massiv die marinen Oekosysteme. Ein wirksamer Meeresumweltschutz erfordert daher einschneidende politische Initiativen und grundlegende Korrekturen insbesondere in der Fischereipolitik, der Agrarpolitik und bei der Chemikalienregulierung. Diese Bilanz zieht der Rat von Sachverstaendigen fuer Umweltfragen in seinem aktuellen Sondergutachten 'Meeresumweltschutz fuer Nord- und Ostsee'. Das Sondergutachen - gibt einen Ueberblick ueber die wichtigsten Problemfelder und die aktuelle Belastungslage, - zeigt den wesentlichen Handlungsbedarf auf, insbesondere fuer die Fischerei-, Chemikalien-, Agrar- und Schifffahrtspolitik und - entwickelt Vorschlaege fuer eine integrierte europaeische und nationale Meeresschutzpolitik einschliesslich einer Merresraumordnung. (orig.)

  13. Forest report 2015 for Baden-Wuerttemberg; Waldzustandsbericht 2015 fuer Baden-Wuerttemberg

    Energy Technology Data Exchange (ETDEWEB)

    Meining, Stefan [Buero fuer Umweltueberwachung, Freiburg (Germany); Wilpert, Klaus v.; Hoelscher, Andrea [Forstliche Versuchs- und Forschungsanstalt Baden-Wuerttemberg, Freiburg im Breisgau (Germany); and others

    2015-07-01

    In Baden-Wuerttemberg, the state of forests has been recorded since the 1980s in the course of an annual forest status report. In 2015, a decline in forest damage can be reported. As an indicator for the evaluation of the forest state, the crown condition of the trees applies. The average crown defoliation has been reduced by two percentage points to around 24 percent, while the share of healthy forest areas increased by five percentage points to a total of 29 percent. The clearly damaged forest areas decreased by six percentage points to 36 percent. Concerns are causing a relatively new fungus disease in the tree species ash, the ash dieback. [German] In Baden-Wuerttemberg wird der Zustand der Waelder seit den 1980er Jahren im Zuge eines jaehrlichen Waldzustandsberichtes erfasst. Fuer das Jahr 2015 kann erfreulicherweise einen Rueckgang der Waldschaeden verzeichnet werden. Als Indikator fuer die Beurteilung des Waldzustandes gilt der Kronenzustand der Baeume. Die durchschnittliche Kronenverlichtung hat sich um zwei Prozentpunkte auf rund 24 Prozent verringert, waehrend sich der Anteil der gesunden Waldflaeche um fuenf Prozentpunkte auf insgesamt 29 Prozent erhoehte. Die deutlich geschaedigten Waldflaechen verringerten sich um sechs Prozentpunkte auf 36 Prozent. Sorgen bereitet eine relativ neue Pilzerkrankung bei der Baumart Esche, das Eschentriebsterben.

  14. PM-materials for hot working tools; PM-Werkstoffe fuer warmgehende Werkzeuge

    Energy Technology Data Exchange (ETDEWEB)

    Berns, H.; Broeckmann, C.; Theisen, W. [Bochum Univ. (Germany). Fakultaet fuer Maschinenbau; Wewers, B.

    2001-05-01

    Tools and wear parts for compacting tools are subjected to high abrasive wear and mechanical loading at elevated temperatures. MMC's based in iron- or nickel with hard particles are developed and investigated. The materials were manufactured from powders by hot isostatic pressing (HIP) and subsequently heat treated. Diffusion between hard phases and metal matrix brings about certain micro structures which were tested with respect to the resistance against sliding abrasion at room and elevated temperatures. Three-point bending tests and thermal cycling of the material was utilized to characterise the mechanical behaviour. Based on this results a toolkit for a roller press for briquetting was produced and brought into application. (orig.) [German] Werkzeuge und Verschleissteile fuer die Verarbeitung von mineralischen Guetern bei erhoehter Temperatur unterliegen sowohl hohem abrasivem Verschleiss als auch hohen mechanischen Lasten. Es werden hartphasenhaltige Verbundwerkstoffe auf Eisen- und Nickelbasis entwickelt und untersucht. Die Fertigung dieser MMC's erfolgt durch heiss isostatisches Pressen (HIP) und anschliessende Waermebehandlung. Durch Diffusion zwischen Hartphasen und Metallmatrix entstehen Gefuege, die bezueglich ihres Widerstandes gegen Abrasivverschleiss bei Raumtemperatur und gegen Korngleitverschliess bei erhoehter Temperatur geprueft werden. Zur Charakterisierung der mechanischen Eigeschaften werden Dreipunktbiegeversuche und thermsiche Ermuedungsversuche durchgefuehrt. Die gewonnenen Erkenntnisse werden genutzt, um einen Werkzeugsatz fuer eine Brikettierpresse herzustellen und in Einsatz zu bringen. (orig.)

  15. Innovative inspection system for reactor pressure vessels; Innovative Pruefsysteme fuer Reaktordruckbehaelter

    Energy Technology Data Exchange (ETDEWEB)

    Mertens, K.; Trautmann, H.

    1999-08-01

    The versatile, compact and modern underwater systems described, the DELPHIN manipulators and MIDAS submarines, are innovative systems enabling RPV inspections at considerably reduced efforts and time, thus reducing the total time required for ISI of reactors. (orig./CB) [Deutsch] Die vorgestellten kleinen, flexiblen und modernen Schwimmsysteme (DELPHIN-Manipulatoren und MIDAS-U-Boote) sind innovative Systeme fuer die Reduzierung der Aufwaende und Zeit zur Pruefung des Reaktordruckbehaelters und damit zur Reduktion der Revisionszeiten der Reaktoranlagen. (orig.)

  16. Oil-free piston compressors for compressed air and gas; Oellose Kolbenkompressoren fuer Druckluft und Gase

    Energy Technology Data Exchange (ETDEWEB)

    Frefel, B. [Fritz Haug AG, St. Gallen (Switzerland)

    2002-11-01

    Oil-free compressors are lubricated with special materials in dry operation. The technology was developed 35 years ago by the Swiss company, Fritz Haug AG. Originally developed for 10 - 40 bar, oil-free compressors are now available for both the low-pressure and high-pressure range. [German] Unter dem Begriff ''oellose Kompressoren'' versteht man Verdichter, die in der ganzen Anlage keinen Tropfen Oel verwenden, weder im Fuehrungs- und Verdichtungstell noch im Triebwerk. Die Schmierung erfolgt mit speziellen Materiallen im Trockenlauf. Die Technik der oellosen und trockenlaufenden Kolbenkompressoren wurde bereits vor rund 35 Jahren von der schweizer Firma Fritz Haug AG entwickelt. Anfaenglich war die Anwendung der Verdichtung von Luft auf 10 bis 40 bar vorbehalten. Durch Weiterentwicklungen in neue Materiallen und in der Konstruktion besteht heute auch ein umfangreiches Sortiment an Kompressoren fuer die oellose und trockene Verdichtung von Gasen fuer den Nieder- und Hochdruckbereich. (orig.)

  17. Zinc oxide for spintronic applications. Sol-gel processes and characterization; Zinkoxid fuer spintronische Anwendungen. Sol-Gel-Prozesse und Charakterisierung

    Energy Technology Data Exchange (ETDEWEB)

    Knies, Christoph

    2009-06-15

    results of these measurements seem however to underly a statistical distribution and let no correlation with the specific doping of each sample to be recognized. In order to study the influence of the doping on the charge carriers magnetotransport experiments were performed. Again and correspondingly to the results of the MCD and ESR studies no hints on a ferromagnetic order could be found. Instead the behaviour observed in the experiments can be explained by the formation of a common disturbance band of flat donor and Co level. [German] Seit dem Jahr 1999 veroeffentlichte theoretische Modelle sagen fuer Systeme auf Basis von Cobalt-dotiertem Zinkoxid die Bildung einer ferromagnetischen Ordnung mit Curie-Temperaturen oberhalb der Raumtemperatur voraus. Wesentliche Bedingung fuer das Auftreten der ferromagnetischen Wechselwirkung ist das Vorhandensein von zusaetzlichen Ladungstraegern, die mit den d-Zustaenden des Cobalts wechselwirken. Das Ziel dieser Arbeit stellt die Herstellung von Cobalt-dotierten Zinkoxid-Duennschichten mit Hilfe des Tauchbeschichtungsverfahrens, die Charakterisierung der Eigenschaften des Materials sowie die Untersuchung der durch zusaetzliche Dotierung mit flachen Donatoren entstehenden Effekte auf die magnetischen Eigenschaften und den Ladungstraegertransport dar. Die strukturellen Charakterisierung mittels Roentgendiffraktometrie weist auf ein einphasiges nanokristallines Wachstum des ZnO in Wurtzitstruktur bei einer mittleren Teilchengroesse zwischen 20 und 30 nm hin. Cobalt-basierte Fremdphasen koennen fuer Dotierkonzentrationen oberhalb von 20 % beobachtet werden. Optische und Magnetresonanz-Untersuchungen lassen keinen Zweifel am Einbau des Co im 2+ Ladungszustand auf dem Gitterplatz des Zinks in 3d{sup 7} Konfiguration. In Messungen der optischen Absorption und des magnetischen Zirkulardichroismus (MCD) sind die internen Kristallfelduebergaenge des Co{sup 2+} im sichtbaren und zusaetzlich im nahen infraroten Spektralbereich zu beobachten

  18. Knowledge and method base for shape memory alloys

    Energy Technology Data Exchange (ETDEWEB)

    Welp, E.G.; Breidert, J. [Ruhr-University Bochum, Institute of Engineering Design, 44780 Bochum (Germany)

    2004-05-01

    Wissens- und Methodenbasis entwickelt worden. Um hierfuer Informationen ueber den Werkstoff und das Konstruieren mit diesem zu sammeln, wurden Literatur- und Patentrecherchen durchgefuehrt. Die Wissens- und Methodenbasis umfasst Loesungsprinzipien und Informationen zu Effekten, Werkstoffen und Herstellung sowie Gestaltungsrichtlinien und Berechnungsmethoden fuer die Auslegung und Optimierung. Eine Browser-basierte Umsetzung der Wissens- und Methodenbasis gestattet einen unmittelbaren Zugriff auf die jeweils aktuelle Version. Um eine zielgerichtete Weiterentwicklung sicherzustellen, wurde eine Evaluation mit Testnutzern durchgefuehrt. Die Reaktionen von Produktentwicklern aus der industriellen Praxis bestaetigen den Bedarf an einer Unterstuetzung mit aufbereitetem Wissen zu FGL. (Abstract Copyright [2004], Wiley Periodicals, Inc.)

  19. Solarsupport for schools. Utilization of sleeping photovoltaic plants for environmental communication; Solarsupport fuer Schulen. Schlafende Fotovoltaikanlagen fuer die Umweltkommunikation nutzen

    Energy Technology Data Exchange (ETDEWEB)

    Scharp, Michael; Dinziol, Martin; Kliche, Florian

    2009-07-15

    A central question of today's political debates is: Which means are there for ensuring a long-term and sustainable energy supply? Here, strategies for covering tomorrow's energy supply assign renewable energies a decisive role. In face of constantly rising prices for fossil fuels like carbon, oil and gas or the still open question concerning the removal of atomic waste, these discussions are eminently urgent. In order to confront climatic change, renewable energies are needed, so that also in the future a longterm and sustainable energy supply is secured. Sustainable energy supply is the context for the project Solarsupport, which has been supported by the Federal Ministry for the Environment, Nature Conservation and Nuclear Safety (FKZ 0327613). The project has been coordinated by the Institute for Environmental Questions (''Unabhaengige Institut fuer Umweltfragen e.V.'' - UFU) and conducted in cooperation with the Institute for Future Studies and Technology Assessment (''Institut fuer Zukunfststudien und Technologiebewertung gGmbH'' - IZT) and the German Society for Solar Energy, Regional Association Berlin-Brandenburg (Deutsche Gesellschaft fuer Sonnenenergie Regionalverband Berlin-Brandenburg e.V. - DGS). Particularly, the project is concerned with the pedagogical use of solar energy at school. Despite the relatively high number of solar plants at schools, only a few use their plants for pedagogical means. The project Solarsupport surveyed schools with solar plants. As the main reason for the insufficient pedagogical use of solar plants the interviewed teachers named the la ck of a pedagogical concept and their colleagues' disinterest, two factors which are able to reinforce one another. Moreover, it became clear that because of their insufficient technical equipment (no displays, no means for evaluating the plants' output, no connection with the school computers and internet) a high number of the

  20. Alpine solar power station on Sareiserjoch - application of and sturdiness test on a new plastic mounting system; Alpines Solarkraftwerk Sareiserjoch - Anwendung und Haertetest fuer ein neues Kunststoff-Montagesystem

    Energy Technology Data Exchange (ETDEWEB)

    Krause, J. [NEWTEC, Plaston AG, Widnau (Switzerland)

    1997-12-31

    In Malbun in Liechtenstein a grid-connected 22 kW{sub p} PV system has been set up at an altitude of 1900 metres. This system serves its operator as a test of potovoltaics in general and of the mounting systems used in its load-bearing contruction and the fastening of its modules. The present article describes the load-bearing construction and plastic mounting cramp employed. (HW) [Deutsch] Im liechtensteinischen Malbun wurde auf 1900 Metern ueber Meer eine netzgekoppelte 11 kWp-PV-Anlage erstellt, die fuer den Anlagenbetreiber als Test fuer die Photovoltaik im allgemeinen wie auf fuer neue Montagesysteme sowohl bei der Tragkonstruktion als auch bei der Modulbefestigung dienen soll. Tragkonstruktion und Kunststoff-Montageklammer werden dargestellt. (HW)

  1. Forest report 2012 for Baden-Wuerttemberg; Waldzustandsbericht 2012 fuer Baden-Wuerttemberg

    Energy Technology Data Exchange (ETDEWEB)

    Meining, Stefan [Buero fuer Umweltueberwachung, Freiburg (Germany); Wilpert, Klaus v.; Schaeffer, Juergen; Hartmann, Peter; Schumacher, Joerg; Delb, Horst [Forstliche Versuchs- und Forschungsanstalt Baden-Wuerttemberg, Freiburg im Breisgau (Germany); Augustin, Nicole [Bath Univ. (United Kingdom)

    2012-07-01

    The Forest State Report 2012 systematically records the health status of the forest resources in the country on a scientific basis. Environmental information is measured, recorded and evaluated in the context of forest environmental monitoring using a measuring network. More than a third of the forest area has suffered significant damage. The share of undamaged forest areas has declined by almost one third to 26 percent since last year. Compared to the previous year, the crown damage increased by an average of 2.5 percentage points. More important, however, is the fact that for the two main tree species spruce and beech since the turn of the millennium, there has been a marked increase in the damage intensity for all age groups. [German] Der Waldzustandsbericht 2012 erfasst auf wissenschaftlicher Basis systematisch den Gesundheitszustand der Waldbestaende im Land. Im Rahmen des Forstlichen Umweltmonitorings werden mit Hilfe eines Messnetzes Umweltinformationen gemessen, erfasst und ausgewertet. Ueber ein Drittel der Waldflaeche weist deutliche Schaeden auf. Der Anteil der ungeschaedigten Waldflaechen ist seit dem letzten Jahr um fast ein Drittel auf 26 Prozent zurueckgegangen. Die Kronenschaeden haben gegenueber dem Vorjahr um durchschnittlich 2,5 Prozentpunkte zugenommen. Wichtiger ist jedoch der Befund, dass fuer die beiden Hauptbaumarten Fichte und Buche seit der Jahrtausendwende ein deutlicher Anstieg der Schadensintensitaet fuer alle Altersklassen zu beobachten ist.

  2. The energy-optimized house at Zittau - a new teaching and research buliding for gas and HVAC engineering; Das Niedrigenergiehaus Zittau - ein neues Lehr- und Foschungsgebaeude fuer die Gas- und die Versorgungstechnik

    Energy Technology Data Exchange (ETDEWEB)

    Wilsdorf, J. [Hochschule fuer Technik, Wirtschaft und Sozialwesen, Zittau/Goerlitz, Zittau (Germany). Fachbereich Bauwesen, Lehrgebiet Gastechnik

    1996-06-01

    By means of the new energy-optimized building at Zittau, an education and research object, the Hochschule fuer Technik, Wirtschaft und Sozialwesen of Zittau is enhancing the practice-oriented education of students especially in the curricula hvac engineering and structural engineering. As an experimental building it is, at the same time, a complex system demonstrating energy-saving construction and heating and permitting to carry out research and development work. The article describes the concepts and execution of the building. (orig.) [Deutsch] Mit dem neuen Lehr- und Forschungsgebaeude `Niedrigenergiehaus Zittau` verbessert die Hochschule fuer Technik, Wirtschaft und Sozialwesen Zittau die praxisbezogene Ausbildung der Studenten vor allem in den Studiengaengen der Ver- und Entsorgungstechnik und des Bauingenieurwesens. Zugleich ist es als Experimentalbau ein komplexes System fuer energiesparendes Bauen und Heizen und bietet hervorragende Voraussetzungen fuer die Durchfuehrung von Forschungs- und Entwicklungsarbeiten. Im Artikel werden Konzepte und Einrichtungen des Gebaeudes beschrieben. (orig.)

  3. 48. Annual meeting of the Deutsche Gesellschaft fuer Neuroradiologie. Joint annual meeting of the DGNR and OeGNR. Abstracts; 48. Jahrestagung der Deutschen Gesellschaft fuer Neuroradiologie. Gemeinsame Jahrestagung der DGNR und OeGNR. Abstracts

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-09-15

    The conference proceedings of the 48. Annual meeting of the Deutsche Gesellschaft fuer Neuroradiologie contain abstracts on the following issues: neuro-oncological imaging, multimodal imaging concepts, subcranial imaging, spinal codes, interventional neuroradiology, innovative techniques like high-field MRT and hybrid imaging methods, inflammable and metabolic central nervous system diseases and epilepsy.

  4. Device for applying organic chemicals to lysimeter surfaces; Applikationsvorrichtung fuer organische Chemikalien auf Lysimeteroberflaechen

    Energy Technology Data Exchange (ETDEWEB)

    Schroll, R. [GSF - Forschungszentrum fuer Umwelt und Gesundheit Neuherberg GmbH, Oberschleissheim (Germany). Inst. fuer Bodenoekologie

    1999-02-01

    One of the aims of environmental research at the GSF Research Centre for the Environment and Health is to determine the behaviour of environmentally consequential chemicals in terrestrial ecosystems under as natural conditions as possible. The GSF lysimeter plant in Neuherberg permits studying the environmental behaviour of organic chemicals in different soils. Collaborators at GSF have developed a means of applying -14-marked substances in field lysimeters so as to be able to refind released chemicals, identify their conversion products and set up mass balances for the chemicals. [Deutsch] Ein Ziel der Umweltforschung im GSF-Forschungszentrum fuer Umwelt und Gesundheit ist es, das Verhalten von Umweltchemikalien in terrestrischen Oekosystemen unter moeglichst natuerlichen Bedingungen zu bestimmen. In der GSF-Lysimeteranlage Neuherberg kann das Umweltverhalten von Organika in verschiedenen Boeden untersucht werden. Zur Wiedererkennung der ausgebrachten Chemikalie bzw. zur Identifizierung aus ihr entstandener Umwandlungsprodukte und letztendlich auch zur Erstellung einer Massenbilanz fuer das ausgebrachte Praeparat wurde in der GSF die Moeglichkeit geschaffen, {sup 14}C-markierte Substanzen in Freilandlysimetern applizieren zu koennen. (orig.)

  5. Bundesamt fuer Strahlenschutz (BfS). Annual report 2011; Bundesamt fuer Strahlenschutz (BfS). Jahresbericht 2011

    Energy Technology Data Exchange (ETDEWEB)

    Ebermann, Lutz (comp.)

    2012-07-01

    The annual report 2011 of the Bundesamt fuer Strahlenschutz (BfS) includes the following main articles: Fukushima and the consequences, new power lines across Germany and the management of radioactive wastes in Germany. Further topics of the BfS were reasonable exposure to sun and skin cancer prevention, individual health assessment of lung cancer with low-dose CT, occupational radiation exposure in medicine, radiation protection at setting up digital radio of security authorities and organizations, importance of laboratory ring experiments for incorporation monitoring, defence against nuclear hazards: cooperation and exercises in 2011, new developments with regard to radioactivity in drinking water, reportable events in nuclear facilities in 2011, decommissioning of a permanently shut down NPP. The environmental research program of the Federal Environmental ministry - research for strengthening nuclear safety and radiation protection: German uranium miners biobank: consequences of uranium mining and radiological impacts, German miners cohort study, health effects of strong magnetic fields of NMR imaging, radiation exposure due to nuclear medical examinations, national survey on the radio-cesium contamination of wild boars.

  6. Diagnostic systems for motor vehicles. From diagnosis and moni; Diagnosesysteme fuer Kraftfahrzeuge. Von der Diagnose und Ueberwachung bis zum E-Commerce

    Energy Technology Data Exchange (ETDEWEB)

    Baeker, B.; Forchert, T. [DB DaimlerChrysler AG, Stuttgart (Germany). Abt. FT2/ED

    2001-07-01

    Starting from the technical necessity of having monitoring and diagnostic systems in all compartments of modern passenger cars, the contribution discusses how new service concepts can be integrated as well. New diagnostic approaches are outlined which, in addition to failure detection, also enable optimization of the development process chain. At the same time, the depth of diagnosis is improved in order to obtain a multitude of new meta information while driving, which will serve as a basis for installing new services in the vehicle. [German] Gestiegend Komfortanforderungen und die gewachsene Komplexitaet in heutigen und zukuenftigen Elektrik/Elektronik-Systemen fuer Kraftfahrzeuge erfordern leistungsfaehige Diagnosesysteme. Um gleichzeitig im Rahmen der Globalisierung die Wertschoepfungskette weiter zu staerken, muessen als logische Konsequenz des Marktes Ansaetze fuer neuartige Dienstleistungskonzepte erdacht und integriert werden. Dieser Aufsatz diskutiert ausgehend von der technischen Notwendigkeit zukuenftiger Ueberwachungs- und Diagnosesysteme in allen Bereichen moderner Kraftfahrzeuge moegliche Wege zu derartigen Ansaetzen denkbarer systemuebergreifender Dienstleistungsschritte am Fahrzeug. Dabei werden technologisch neuartige Diagnoseansaetze skizziert, die neben einer Fehlererkennung auch die Optimierung der Entwicklungsprozesskette zulassen. Eine gleichzeitige Erhoehung der Diagnosetiefe schafft die Grundlage, eine Vielzahl neuer Meta-Informationen waehrend der Fahrt zu generieren. Diese bilden die Basis fuer neue Dienste am Fahrzeug. (orig.)

  7. Quality assurance for the incorporation surveillance in Germany; Qualitaetssicherung fuer die Inkorporationsueberwachung in Deutschland

    Energy Technology Data Exchange (ETDEWEB)

    Buchholz, Werner; Gerstmann, Udo; Hartmann, Martina; Loescher, Simone; Meisenberg, Oliver; Woidy, Patrick [Bundesamt fuer Strahlenschutz, Oberschleissheim (Germany). FB Strahlenschutz und Gesundheit

    2017-08-01

    The coordination center of the Bundesamt fuer Strahlenschutz is performing annual ring experiments for in-vivo and in-vitro measuring points. This procedure allows checking the measuring data and the competence of the personnel. In the last years these tests included also radionuclides that are important in radiation emergency protection. Case studies for dose determination based on incorporation scenarios are included.

  8. Customer care policy for utilities - demonstrated with the example of a call center; Customer Care fuer EVU - Wirkungszusammenhaenge am Beispiel des Telefon-Service

    Energy Technology Data Exchange (ETDEWEB)

    Weisse, D. [Consulting und Services, pdv Unternehmensberatung GmbH, Roesrath (Germany)

    2000-01-10

    Customer care policy, for preventing change to another provider and consolidating customer loyalty, is becoming a strategic (powerful) instrument for a utility in the competitive market. But what does this really imply for the day-to-day process of dealing with client-specific operations and workflows? The article describes the interactions between strategic marketing for ensuring client satisfaction and the resulting requirements to be met by a utility's call center, and also describes the key 'parameters' and requirements for successful day-to-day management of call centers. (orig./CB) [German] Customer Care zur Reduzierung der Wechselbereitschaft bzw. zur Erhoehung der Kundenbindung wird fuer EVU zu einem strategischen Instrument im Kampf um die Kunden. Aber was bedeutet dies fuer die operative Abwicklung der kundenbezogenen Geschaeftsprozesse? Der Verfasser erlaeutert die Zusammenhaenge zwischen dem strategischen Ziel der Kundenzufriedenheit und der operativen Umsetzung des Telefon-Service und beschreibt die 'Stellschrauben', die fuer diesen Zweck bei der Planung aber auch im taeglichen Management eines Call Centers zur Verfuegung stehen. (orig.)

  9. Water emission inventory for the Federal Republic of Germany; Emissionsinventar Wasser fuer die Bundesrepublik Deutschland

    Energy Technology Data Exchange (ETDEWEB)

    Boehm, E.; Hillenbrand, T.; Marscheider-Weidemann, F.; Schempp, C. [Fraunhofer-Institut fuer Systemtechnik und Innovationsforschung (ISI), Karlsruhe (Germany); Fuchs, S.; Scherer, U. [Karlsruhe Univ. (T.H.) (Germany). Inst. fuer Siedlungswasserwirtschaft; Luettgert, M. [RISA Sicherheitsanalysen GmbH, Berlin (Germany)

    2000-11-01

    Within the frame of this project, a concept for setting up exemplary emission inventories for water was put forward. An overview is given of the international activities on emission inventories and the status of national emission inventories. Based on the data situation in Germany, it was necessary to include both plant-specific, aggregated and calculated data of the point sources in the inventories. Due to their increasing significance, diffuse material emissions into water were also taken into account. Based on the conceptual work, exemplary emission inventories were compiled for nitrogen, phosphorous and adsorbable organic combined halides (AOX) as well as the heavy metals arsenic, cadmium, chrome, copper, mercury, nickel, lead and zinc. These were evaluated according to the areas of origin (sectors) or the emission paths as well as according to the large river basins Danube, Rhine, Ems, Weser, Elbe, Oder, North Sea and Baltic Sea. In addition, lists of the ten largest industrial direct dischargers were compiled. (orig.) [German] Im Rahmen dieses Vorhabens wurde ein Konzept fuer die Erstellung von beispielhaften Emissionsinventaren fuer Gewaesser erarbeitet. Es wird ein Ueberblick ueber die internationalen Aktivitaeten zu Emissionsinventaren und den Stand beim Aufbau von nationalen Emissionsinventaren gegeben. Auf Grund der Datensituation in Deutschland war es erforderlich, dass sowohl anlagenspezifische als auch aggregierte sowie berechnete Daten der Punktquellen in die Inventare einbezogen wurden. Wegen ihrer zunehmenden Bedeutung werden die diffusen Stoffeintraege in die Gewaesser ebenfalls beruecksichtigt. Aufbauend auf den konzeptionellen Arbeiten wurden beispielhafte Emissionsinventare fuer Stickstoff, Phosphor und adsorbierbare organisch gebundene Halogene (AOX) sowie die Schwermetalle Arsen, Cadmium, Chrom, Kupfer, Quecksilber, Nickel, Blei und Zink zusammengestellt. Die Auswertung erfolgte sowohl nach den Herkunftsbereichen (Branchen) bzw. den

  10. Life cycle assessment of different disposal routes of sewage sludge; Oekobilanz verschiedener Entsorgungsmoeglichkeiten fuer Klaerschlamm

    Energy Technology Data Exchange (ETDEWEB)

    Chassot, G.M.; Candinas, T. [Eidgenoessische Forschungsanstalt fuer Agraroekologie und Landbau (FAL), Inst. fuer Umweltschutz und Landwirtschaft IUL Liebefeld, Bern (Switzerland)

    1998-11-01

    The ecological impact of six different disposal routes for sewage sludge of a major sewage treatment plant (three options for agricultural use in liquid, dried and limetreated form, and three options of incineration in a mono-sewage sludge incineration plant, a cement factory and a `Schwel-Brenn` type incinerator for municipal solid waste) has been studied with an comprehensive inventory and five impact assessment methods. Three methods show the important role of soil pollution. Existing methods are not yet able to consider all the factors necessary. The inventories should be completed concerning natural phosphorus resources and organic micropollutants. (orig.) [Deutsch] Sechs Entsorgungsvarianten (drei betreffen die landwirtschaftliche Verwendung in fluessiger, thermisch getrockneter und gekalkter Form und drei die Verbrennung in einer Schlammverbrennungsanlage, einem Zementofen und einer Schwel-Brenn-Anlage fuer Kehricht) fuer den Klaerschlamm einer grossen ARA werden mittels Inventarisierung der verursachten Umweltbelastung und fuenf Bewertungsmethoden untersucht. Drei Methoden zeigen die wichtige Rolle der Bodenbelastung. Die verfuegbaren Methoden koennen aber wichtige Einflussgroessen noch nicht beruecksichtigen. Ferner sollten die Inventare bezueglich P-Ressourcen und organischen Schadstoffen vervollstaendigt werden. (orig.)

  11. Effects of Radiative Recombination and Photon Recycling on Minority Carrier Lifetime in Epitaxial GaINAsSb Lattice-matched to GaSb

    International Nuclear Information System (INIS)

    S Anikeev; D Donetsky; G Belenky; S Luryl; CA Wang; DA Shiau; M Dashiell; J Beausang; G Nichols

    2004-01-01

    Radiative coefficient (B) is a fundamental recombination parameter which is of importance for a variety of optoelectronic minority carrier devices. Radiative recombination was comprehensively studied for wide-bandgap III-V compounds, while for 0.5-0.6 eV materials experimental data are quite limited and demonstrate significant spreading. Here we report excess carrier lifetime in isotype double heterostructures (DHs) of 0.54-eV p-GaInAsSb capped with p-AlGaAsSb, and grown lattice-matched to GaSb. Lifetime was measured by time-resolved photoluminescence (dynamic lifetime) as well as by optical response to sinusoidal excitation (static lifetime). Wide range of GaInAsSb layer thickness was used to separate contributions from interface and radiative recombination processes. Radiative coefficient and recombination velocity at GaInAsSb/AlGaAsSb heterointerface were determined. Temperature dependence of lifetime demonstrated significant contribution of radiative effects to the total recombination

  12. Energy management through building automation. Fundamentals - Technologies - Applications; Energiemanagement durch Gebaeudeautomation. Grundlagen - Technologien - Anwendungen

    Energy Technology Data Exchange (ETDEWEB)

    Aschendorf, Bernd [Fachhochschule Dortmund (Germany). Fachbereich Informations- und Elektrotechnik

    2014-02-01

    The books available in the market consider only the use of individual buildings bus systems, but not to compare with each other with respect to cost-benefit and applicability. In this book, a total of 40 different systems, such as radio bus systems, PEHA-PHC, EIB, LCN, LON, PLC systems, investigated for their possible use in the various categories of buildings. The comparison refers to all levels of the automation pyramid from fieldbus, to automation to the control level and considers in particular the usability for SmartMetering-based energy management. [German] Die am Markt vorhandenen Buecher betrachten lediglich den Einsatz einzelner Gebaeudebussysteme, nicht jedoch den Vergleich untereinander mit Bezug auf Kosten/Nutzen und Anwendbarkeit. In diesem Buch werden insgesamt 40 verschiedene Systeme, wie z.B. Funkbussysteme, PEHA-PHC, EIB-, LCN-, LON-, SPS-Systeme, auf deren Einsatzmoeglichkeit in den verschiedenen Gebaeudekategorien untersucht. Der Vergleich bezieht sich auf alle Ebenen der Automatisierungspyramide vom Feldbus ueber die Automatisierung bis zur Leitebene und betrachtet insbesondere auch die Verwendbarkeit fuer smartMetering-basiertes Energiemanagement.

  13. Thermal solar systems in domestic buildings. Evaluation of the Hessen state funding programme for thermal solar systems; Thermische Solaranlagen in Wohngebaeuden. Auswertung des Solarthermischen Foerderprogrammes des Landes Hessen fuer die Jahre 1992 - 1996

    Energy Technology Data Exchange (ETDEWEB)

    Lackschewitz, U.

    1998-11-01

    The report presents statistical information on all solar systems that received state funds. Problems concerning the installation of solar systems are gone into. The report focuses on service water heating systems both for single-family buildings and multiple dwellings. Further, four enquiries were carried out among operators and producers of thermal solar systems, and 29 state-funded solar systems were visited and investigated in situ. Based on the analysis of the funding programme so far, further measures are suggested. [German] Nach einer fuenfjaehrigen Laufzeit des Solarthermischen Foerderprogramms fuer Wohngebaeude beauftragte das Hessische Ministerium fuer Umwelt, Energie, Jugend, Familie und Gesundheit die Gesellschaft fuer umweltfreundliche Technologie e.V. in Kassel mit einer Auswertung des Foerderprogrammes fuer die Jahre 1992 bis 1996. Die Auswertung gibtzunaechst einen Ueberblick ueber alle gefoerderten Solaranlagen. Darueber hinaus wurden wichtige Fragestellungen, die bei der Installation thermischer Solaranlagen in Wohngebaeuden auftreten, anhand einer groesseren Zahl gefoerderter Solaranlagen untersucht. Schwerpunkte dieser Untersuchung bilden Solaranlagen zur Brauchwassererwaermung zum einen in Einfamilienhaeusern und zum anderen in groesseren Mehrfamilienhaeusern. Neben der Auswertung der Foerderantraege wurden dazu vier Umfragen bei Betreibern und Anbietern thermischer Solaranlagen durchgefuehrt und 29 gefoerderte Solaranlagen besichtigt. Aufbauend auf der Analyse des bisherigen Foerderprogrammes werden Vorschlaege fuer weitere Massnahmen des Landes zur Foerderung thermischer Solaranlagen unterbreitet. (orig.)

  14. Manufacture and qualification of hot roll-clad composites with nickel base cladding material for use in flue gas desulphurization plants. Final report; Herstellung und Qualifizierung warmwalzplattierter Verbundwerkstoffe mit Nickelbasisauflagen fuer den Einsatz in Rauchgasentschwefelungsanlagen. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Kirchheiner, R.; Stenner, F.

    1992-03-16

    . organisch basierte Korrosionsschutzsysteme erleiden schon nach wenigen Betriebsjahren massive Schaeden. NiCrMo-Legierungen haben sich unter vergleichbaren Bedingungen in der chemischen Industrie seit Jahrzehnten bewaehrt. Unter wirtschaftlichen Gesichtspunkten kann beim Neubau dieser grossvolumigen Komponenten in REA die Verwendung dieser NiCrMo-Werkstoffe nur in plattierter Form erfolgen. Im Rahmen dieses Projektes wurde die Herstellung von warmwalzplattierten Verbundwerkstoffen, bestehend aus den Auflagewerkstoffen vom Typ NiMo16Cr15W (2.4819) und NiCr21No14W (2.4602) auf dem Traegerwerkstoff Stahl RSt 37-2 erprobt. Das Verhalten der Auflagewerkstoffe bei gleichfoermiger und lokaler Korrosionsbeanspruchung wurde u.a. in Standard-Laborpruefungen untersucht. Eine erhoehte IK-Anfaelligkeit hat sich in Uebereinstimmung mit den ausgezeichneten Gefuegebildern nicht ergeben. In weiteren Laborpruefungen unter REA-Simulat-Bedingungen sowie durch Auslagerungsversuche in laufenden REA konnten diese positiven Befunde auch auf die Praxis uebertragen werden. Das gilt uneingeschraenkt auch fuer den verbindungsgeschweissten Zustand mit artgleichem Schweisszusatz. Die neuen warmwalzplattierten Verbundwerkstoffe entsprechen in ihrem technologischen Verhalten denen der massiven Ausgangsbleche und sind damit fuer den Einsatz in Rauchgasreinigungsanlagen qualifiziert. (orig./BBR) With 32 refs., 13 tabs., 29 figs.

  15. Protection of quality and innovation in radiation oncology: The prospective multicenter trial the German Society of Radiation Oncology (DEGRO-QUIRO study). Evaluation of time, attendance of medical staff, and resources during radiotherapy with IMRT

    Energy Technology Data Exchange (ETDEWEB)

    Vorwerk, H.; Schiller, R. [University of Marburg, Department of Radiotherapy and Radiooncology, Marburg (Germany); Zink, K.; Engenhart-Cabillic, R. [University of Marburg, Department of Radiotherapy and Radiooncology, Marburg (Germany); University of Giessen, Department of Radiotherapy and Radiooncology, Giessen (Germany); Budach, V.; Boehmer, D. [Charite, University of Berlin, Department of Radiotherapy and Radiooncology, Berlin (Germany); Kampfer, S. [Technische Universitaet Muenchen, Department of Radiation-Oncology, Muenchen (Germany); Popp, W. [Prime Networks AG, Basel (Switzerland); Sack, H. [University of Essen, Department of Radiotherapy and Radiooncology, Essen (Germany)

    2014-05-15

    treatment with image guidance). The prospective data presented here allow for an estimate of the required machine time and manpower needed for the core procedures of radiotherapy in an average radiation treatment with IMRT. However, one should be aware that a number of necessary and time-consuming activities were not evaluated in the present study. (orig.) [German] Internationale Gesellschaften haben Empfehlungen ueber die erforderliche technische Ausruestung und fuer die Anzahl von Mitarbeitern zur Behandlung von Tumorpatienten in der Strahlentherapie veroeffentlicht. Keine dieser Empfehlungen basiert auf durchgefuehrten Messungen fuer die einzelnen Behandlungsabschnitte in der Strahlentherapie, sondern sind Schaetzwerte. Die Deutsche Gesellschaft fuer Radioonkologie (DEGRO) will ihre Empfehlungen durch prospektive Auswertungen aller wichtigen Ablaeufe in der Strahlentherapie bei den haeufigsten Tumorentitaeten untermauern. Ziel dieser Untersuchung war es, die erforderlichen Ressourcen bei der strahlentherapeutischen Behandlung mit intensitaetsmodulierter Bestrahlungstechnik bei unterschiedlichen Tumorentitaeten zu evaluieren. Vier Strahlentherapiezentren (Universitaet Marburg, Universitaet Giessen, Charite Berlin, Universitaet Muenchen rechts der Isar) nahmen an dieser prospektiven Studie teil. Die Arbeitszeit der verschiedenen Berufsgruppen sowie die Raumbelegung bei der Planung und Durchfuehrung der Strahlentherapie wurden prospektiv waehrend eines Zeitraums von jeweils 2 Monaten pro Zentrum dokumentiert und statistisch ausgewertet. Die Zeit fuer die einzelnen Abschnitte der Behandlung variierte erheblich zwischen den Tumorentitaeten, Patienten und den Behandlungszentren. Fuer die technische Vorbereitung eines Patienten (Definition der Zielvolumina und Risikoorgane, Bestrahlungsplanung und Autorisation des Bestrahlungsplans) wurden im Mittel 3 h 54 min benoetigt. Der Zeitanteil der Medizinphysikexperten betrug dabei 57 %. Der Ausbildungsanteil fuer die Vorbereitungszeit

  16. Utilization scenarios for driving support systems in cargo traffic and their evaluation; Einsatzszenarien fuer Fahrerassistenzsysteme im Gueterverkehr und deren Bewertung

    Energy Technology Data Exchange (ETDEWEB)

    Henning, K.; Preuschoff, E. (eds.)

    2003-07-01

    The report presents a summary of the project of the above title (EFAS project). While earlier projects focused on the technical side, EFAS is the first to present a systematic analysis, presentation and evaluation of the parameters influencing driving support systems. With the aid of a systemic analysis, the key influencing factors are defined and analyzed, and three scenarios are developed which take account of user-oriented, organizational, operational, technical, infrastructural and legal aspects. The scenarios are evaluated with the aid of driving and traffic simulations in the fields of humans, organization and technology, and actions are recommended on this basis for driving support systems in cargo transport. [German] Der Bericht fasst die Ergebnisse des Projektes ''Einsatzszenarien fuer Fahrerassistenzsysteme im Gueterverkehr'' (EFAS) zusammen. Bisher wurde die Thematik Fahrerassistenzsysteme hauptsaechlich auf der Seite der Fahrzeugtechnik vorangetrieben. Das Projekt EFAS stellt nun zum ersten Mal eine umfassende Analyse, Darstellung und Bewertung dar. Mit Hilfe einer systemischen Analyse werden die wesentlichen Einflussfaktoren fuer die Einbindung von Fahrerassistenzsystemen in das Gesamtsystem ''Verkehr'' bestimmt und untersucht. Hieraus werden drei Einsatzszenarien entwickelt, die nutzerbezogene, organisatorische, betriebliche, fahrzeugtechnische, infrastukturelle und rechtliche Aspekte zu Zukunftsbildern zusammenfuegen. Die Szenarien werden mit Hilfe von Fahr- und Verkehrssimulationen in den Bereichen Mensch, Organisation und Technik bewertet. Aus den Ergebnissen werden konkrete Handlungsempfehlungen fuer den Einsatz von Fahrerassistenzsystemen im Strassengueterverkehr abgeleitet. (orig.)

  17. Development of new layer systems for sliding bearings under high mechanical and tribological stress. Final report; Entwicklung neuer Schichtsysteme fuer den Einsatz bei mechanisch-tribologisch hochbeanspruchten Gleitlagern. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Mathias, M.; Herrmann, B.

    1995-12-31

    The report describes the sputtering technique as a coating method for sliding bearings of high-speed diesel engines. The project aimed at the development of a heavy-duty, wear-resistant sputtered layer on a copper-lead basis for sliding bearings. (HW) [Deutsch] Es wird berichtet ueber die Einfuehrung der Sputtertechnik als Beschichtungsverfahren fuer Gleitlager fuer schnell laufende Dieselmotoren. Ziel des Projektes war die Entwicklung einer hochbelastbaren, verschleissfesten Gleitlager-Sputterschicht auf Kupfer-Blei-Basis. (HW)

  18. Preventive strategy for nanomaterials. Special report; Vorsorgestrategien fuer Nanomaterialien. Sondergutachten

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-07-01

    knowledge of which nanomaterials are used in which products. The SRU sees a need for greater transparency here to enable public authorities to react swiftly whenever evidence of health or environmental risks arises. Consumers should in principle enjoy freedom of choice. For this reason the SRU recommends creating a registry of nanoproducts and supplementation of existing labelling requirements. [German] In diesem Sondergutachten gibt der Sachverstaendigenrat fuer Umweltfragen (SRU) Empfehlungen fuer einen verantwortungsvollen, vorsorgeorientierten Umgang mit dieser Technologie. Ziel ist es, Innovationen zu ermoeglichen, aber auch Risiken fruehzeitig zu erkennen und zu mindern. Der SRU sieht dringenden Handlungsbedarf bei der Regulierung von Nanomaterialien und fordert mehr Transparenz bei Verbraucherprodukten ein. Sobald ein begruendeter Anlass zur Besorgnis besteht, muss nach dem Vorsorgeprinzip gehandelt und zwischen Risiken und Chancen abgewogen werden. Um dies zu ermoeglichen, sind zahlreiche rechtliche Aenderungen erforderlich. Nanomaterialien und Nano-Produkte unterliegen grundsaetzlich dem Stoff-, Produkt- und Umweltrecht. In der Praxis fuehren aber die Besonderheiten von Nanomaterialien dazu, dass nicht alle rechtlichen Instrumente greifen. So werden Nanomaterialien bei der Registrierung von Chemikalien und bei der Zulassung von Produkten nicht immer separat erfasst und damit bewertet. Der SRU empfiehlt, solche nanospezifischen Regelungsluecken schnell zu schliessen. Dazu ist es notwendig, Nanomaterialien verbindlich zu definieren, sie grundsaetzlich bei der Risikobewertung von Chemikalien wie eigenstaendige Stoffe zu behandeln und mit einem eigens auf sie zugeschnittenen Datensatz zu registrieren. Dabei duerfen die Risiken von Nanomaterialien nicht pauschal bewertet werden, weil manche Materialien nach heutigem Kenntnisstand unbedenklich sind, waehrend bei anderen ein Risikopotenzial besteht. Einen Anlass zur Besorgnis sieht der SRU vor allem bei der Verwendung von

  19. Selection of procedures for inservice inspections; Auswahl der Verfahren fuer wiederkehrende Pruefungen

    Energy Technology Data Exchange (ETDEWEB)

    Brast, G [Preussische Elektrizitaets-AG (Preussenelektra), Hannover (Germany); Britz, A [Bayernwerk AG, Muenchen (Germany); Maier, H J [Stuttgart Univ. (Germany). Staatliche Materialpruefungsanstalt; Seidenkranz, T [TUEV Energie- und Systemtechnik GmbH, Mannheim (Germany)

    1998-11-01

    At present, selection of procedures for inservice inspection has to take into account the legal basis, i.e. the existing regulatory codes, and the practical aspects, i.e. experience and information obtained by the general, initial inservice inspection or performance data obtained by the latest, recurrent inspection. However, regulatory codes are being reviewed to a certain extent in order to permit integration of technological progress. Depending on the degree of availability in future, of inspection task-specific, sensitive and qualified NDE techniques for inservice inspections (`risk based ISI`), the framework of defined inspection intervals, sites, and detection limits will be broken up and altered in response to progress made. This opens up new opportunities for an optimization of inservice inspections for proof of component integrity. (orig./CB) [Deutsch] Zur Zeit muss sich die Auswahl der Pruefverfahren an den gueltigen Regelwerken und, da es sich um wiederkehrende Pruefungen handelt, an der Basispruefung bzw. der letzten wiederkehrenden Pruefung orientieren. Jedoch vollzieht sich zur Zeit eine Oeffnung der Regelwerke, mit der man auch der Weiterentwicklung der Prueftechniken Rechnung traegt. In dem Masse, wie zukuenftig auf die Pruefaufgabe/Pruefaussage optimal abgestimmte und qualifizierte Prueftechniken mit einer hohen Nachweisempfindlichkeit am Bauteil fuer zielgerichtete wiederkehrende Pruefungen (als `risk based ISI`) zur Verfuegung stehen, wird der Rahmen mit festgelegten Pruefintervallen, Prueforten und festen Registriergrenzen gesprengt und variabel gestaltet werden koennen. Damit ergeben sich neue Moeglichkeiten fuer eine Optimierung der WKP zum Nachweis der Integritaet des Bauteils. (orig./MM)

  20. Aluminum or steel? Mounting systems for solar generators - a practice report; Aluminium oder Stahl? Montagesysteme fuer Solargeneratoren - ein Praxisreport

    Energy Technology Data Exchange (ETDEWEB)

    Schnitzer, Sandy [Mounting Systems GmbH, Rangsdorf (Germany); Hannemann, Lydia

    2013-10-01

    Mounting systems for solar generators must be solid and reliable as long as possible so that they carry the modules. Which material is best? [German] Montagesysteme fuer Solargeneratoren muessen solide sein, damit sie moeglichst lange und zuverlaessig die Module tragen.

  1. New aspects from legislation, guidelines and safety standards for MRI; Neues aus Gesetzen, Richtlinien und Sicherheitsstandards fuer die MRT

    Energy Technology Data Exchange (ETDEWEB)

    Muehlenweg, M. [Krankenhaus Martha-Maria Halle-Doelau, Institut fuer Radiologie, Halle (Saale) (Germany); Schaefers, G. [MR:comp GmbH, Gelsenkirchen (Germany); Trattnig, S. [Exzellenzzentrum Hochfeld-Magnetresonanz, Medizinische Universitaet Wien, Universitaetsklinik fuer Radiodiagnostik, Wien (Austria)

    2015-08-15

    Betriebsanleitung der MR-Scanner. Die verpflichtenden Inhalte der Betriebsanleitung werden in einer zentralen Norm der International Electrotechnical Commission (IEC) 60601-2-33 geregelt. In dieser Norm wurde juengst die Anwendung statischer Magnetfelder in der MRT bis zu 8 Tesla (T) in der klinischen Routine (kontrollierte Betriebsart 1. Stufe) zugelassen. Die ebenfalls notwendige CE-Zertifizierung der Ultrahochfeldscanner (7-8 T) in Europa ist fuer zukuenftige Geraete zu erwarten. Bestehende Installationen werden nicht automatisch zertifiziert, sondern behalten ihren experimentellen Status. Die aktuelle Erweiterung der IEC 60601-2-33 fuehrt eine neue Zusatzoption, die sog. ''fixed parameter option'' (FPO) ein. Diese Option kann zusaetzlich zu den etablierten Betriebsarten geschaltet werden und definiert eine fixe Geraetekonstellation und bestimmte Parameter des Energieoutputs von MR-Scannern, die zukuenftig die Untersuchungen von Implantatpatienten vereinfachen soll. Die Beschaeftigung schwangerer Mitarbeiterinnen in einer MRT-Einrichtung ist nach wie vor nicht allgemein in Europa geregelt. In Deutschland und Oesterreich wurden 2014 in Teilregionen Beschaeftigungsverbote fuer Schwangere und Stillende im der MR-Kontrollzone (0,5 mT) erteilt. Zugrunde liegt die meist ungeklaerte Frage der Anwendbarkeit von Grenzwerten fuer Beschaeftigte (Extremitaetenexposition fuer statische Magnetfelder bis 8 T erlaubt) oder der Grenzwerte fuer die Allgemeinbevoelkerung (maximal bis 400 mT). Das Verwerfen von Muttermilch nach i.v.-Gabe von gadoliniumhaltigen Kontrastmitteln bei einer stillenden Frau wird laut Gesellschaft fuer urogenitale Radiologie (ESUR) nur noch bei Gabe von Kontrastmitteln der Nephrogenic-systemic-fibrosis(NSF)-Hochrisikoklasse empfohlen. (orig.)

  2. Gas generation from biomass for decentralized power supply systems; Gaserzeugung fuer dezentrale Energiesysteme auf der Basis von Biomasse

    Energy Technology Data Exchange (ETDEWEB)

    Kubiak, H; Papamichalis, A; Heek, K.H. van [DMT-Inst. fuer Kokserzeugung und Brennstofftechnik, Essen (Germany)

    1997-12-31

    By a reaction with steam, bioresidues and plants can be converted into a gas consisting mainly of hydrogen, carbon monoxide and methane which can be used for electric power generation in gas engines, gas turbins and fuel cells. The conversion processes, especially the fuel cell process, are environment-friendly and efficient. For decentralized applications (i.e. for biomass volumes of 0.5 to 1 t/h), an allothermal process is recommended which is described in detail. (orig) [Deutsch] Durch Reaktion mit Wasserdampf lassen sich Bioreststoffe und Energiepflanzen zu einem Gas umsetzen, das im wesentlichen aus Wasserstoff, Kohlenmonoxid und Methan besteht und z.B. ueber Gasmotoren, Gasturbinen, vorzugsweise aber Brennstoffzellen zu Strom umgewandelt werden kann. Die Umwandlungsverfahren, insbesondere unter Benutzung von Brennstoffzellen, sind umweltfreundlich und haben einen hohen Wirkungsgrad. Als Vergasungsverfahren eignet sich fuer die dezentrale Anwendung. - d.h. fuer eine Biomassemenge von 0,5 bis 1 t/h - insbesondere das hier beschriebene allotherme Verfahren. (orig)

  3. Gas generation from biomass for decentralized power supply systems; Gaserzeugung fuer dezentrale Energiesysteme auf der Basis von Biomasse

    Energy Technology Data Exchange (ETDEWEB)

    Kubiak, H.; Papamichalis, A.; Heek, K.H. van [DMT-Inst. fuer Kokserzeugung und Brennstofftechnik, Essen (Germany)

    1996-12-31

    By a reaction with steam, bioresidues and plants can be converted into a gas consisting mainly of hydrogen, carbon monoxide and methane which can be used for electric power generation in gas engines, gas turbins and fuel cells. The conversion processes, especially the fuel cell process, are environment-friendly and efficient. For decentralized applications (i.e. for biomass volumes of 0.5 to 1 t/h), an allothermal process is recommended which is described in detail. (orig) [Deutsch] Durch Reaktion mit Wasserdampf lassen sich Bioreststoffe und Energiepflanzen zu einem Gas umsetzen, das im wesentlichen aus Wasserstoff, Kohlenmonoxid und Methan besteht und z.B. ueber Gasmotoren, Gasturbinen, vorzugsweise aber Brennstoffzellen zu Strom umgewandelt werden kann. Die Umwandlungsverfahren, insbesondere unter Benutzung von Brennstoffzellen, sind umweltfreundlich und haben einen hohen Wirkungsgrad. Als Vergasungsverfahren eignet sich fuer die dezentrale Anwendung. - d.h. fuer eine Biomassemenge von 0,5 bis 1 t/h - insbesondere das hier beschriebene allotherme Verfahren. (orig)

  4. Statistical-dynamic climate forecast for Europe and Germany. Final report; Statistisch-dynamische Klimavorhersage fuer Europa und Deutschland. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Denhard, M.; Schoenwiese, C.D.

    2001-07-01

    Principal Correlation Pattern Analysis (PCPA) maps the local circulation, temperature and precipitation anomalies in the northern hemisphere in monthly resolution and permits an interpretation of their causes. Calculations are made for the El Nino phenomenon, NAO, and the quasi-11-year cycle of solar radiation variation. Especially the El Nino calculations show the efficiency of PCPA. [German] Mit Hilfe der Principal Correlation Pattern Analysis (PCPA) koennen die von verschiedenen Klimaantrieben erzeugten lokalen Zirkulations-, Temperatur- und Niederschlagsanomalien auf der Nordhemisphaere in monatlicher Aufloesung dargestellt und ursaechlich interpretiert werden. Diese Rechnungen wurden fuer das El Nino Phaenomen, die NAO und den quasi 11-jaehrigen Zyklus der solaren Strahlungsschwankungen durchgefuehrt. Insbesondere die Untersuchungen zu Wirkungen von El Nino auf Europa zeigen, dass die PCPA die Kopplungen eines Prozesses mit dem Klimasystem sehr genau beschreibt und somit die Voraussetzungen schafft, die Wirkungen dieses Klimaantriebs zu modellieren und ihn zur Vorhersage zu nutzen. Erste einfache Vorhersageexperimente fuer das europaeische Klima bestaetigen diese Aussage. (orig.)

  5. Kernforschungszentrum Karlsruhe. Institut fuer Datenverarbeitung in der Technik: Progress report on research and development works in 1984

    International Nuclear Information System (INIS)

    1985-02-01

    The Institut fuer Datenverarbeitung in der Technik (Institute for Data Processing in Engineering) works in the field of applied computer and systems analysis. The present report describes the activities of this Institute within the following KfK-projects: Reprocessing, Fusion Technology, Nuclear Material Safeguards, Nuclear Safety, and the Fast Breeder Project. (WB) [de

  6. Restructuring of the electricity market. New general framework and management strategies for municipalities. Documentation of contributions to the IKU seminar; Strommarkt im Umbruch. Neue Rahmenbedingungen und Strategien fuer Kommunen. Veranstaltungsunterlagen

    Energy Technology Data Exchange (ETDEWEB)

    Schaefer, C. (comp.)

    2000-07-01

    The titles of the seven papers presented at the IKU seminar are as follows: 1. The emerging competitive electricity markets - Perspectives for municipalities. - 2. New supply offers and terms and conditions for power procurement of municipalities. - 3. Power procurement and awarding of contracts - legal framework and recommendations for municipalities in designing the tendering procedure in the competitive market environment. - 4. Experience of a municipality in the process of establishing a local pool of buyers. - 5. Experience obtained in defining new tender conditions and specifications for power supply to a municipal undertaking. - 6. Experience of a municipality obtained in negotiations with electricity supply undertakings. - 7. Invitations to tender for energy supply to municipalities - experience of the hessenENERGIE GmbH. (orig./CB) [German] Die Titel der in diesem Dokument abgedruckten sieben Beitraege zum IKU Seminar lauten: 1. Wettbewerb auf den Strommaerkten - Perspektiven fuer Kommunen. - 2. Neue Angebote und neue Konditionen fuer den Strombezug von Kommunen. - 3. Strombezug und Vergaberecht - Rechtlicher Rahmen und Empfehlungen zur Gestaltung der Vergabe bei oeffentlichen Auftraggebern. - 4. Erfahrungen mit der Bildung eines kommunalen Nachfragepools. - 5. Erfahrungen mit der Ausschreibung von Stromlieferungen fuer einen oeffentlichen Auftraggeber. - 6. Erfahrungen einer Kommune aus Verhandlungen ueber den Strombezug mit Versorgungsunternehmen. - 7. Ausschreibung von Energielieferungen fuer Kommunen - Erfahrungen und Angebote der hessenENERGIE GmbH. (orig./CB)

  7. Safety aspects and safety measures for the refrigerants N{sub 3} and F-CFC and CFC; Sicherheitsaspekte/Sicherheitsmassnahmen fuer Kaeltemittel NH{sub 3} und FCKW/FKW

    Energy Technology Data Exchange (ETDEWEB)

    Stuerchler, P. [GfG AG, Binz (Switzerland)

    2001-09-01

    Experts agree that ammonia is the best and most economical refrigerant for a number of applications, e.g. in skating rinks, the food industry, chemical plants, etc. It has good thermodynamic properties and a low ozone-depleting potential, but it is also an aggressive and toxic substance. The potential hazard to humans and plants can be reduced, however, by early detection of leaks. There are different specifications in different European countries. In Switzerland, the EKAS regulations apply. [German] In der Kaelteindustrie herrscht eine Uebereinstimmung, dass fuer eine Vielzahl von Anlagen, z.B. Eissportanlagen, Lebensmittelbetriebe, Chemieanlagen u.v.m., Ammoniak als das beste und wirtschaftlichste Kaeltemittel betrachtet wird. Die guten thermodynamischen Eigenschaften und das geringe Ozonabbaupotential haben Ammoniak zum wichtigsten Kaeltemittel in mittleren und Grossanlagen gemacht. Die aggressive und giftige Chemikalie Ammoniak birgt jedoch ein nicht zu unterschaetzendes Gefahrenpotential fuer Mensch und Anlage. Diese Gefahr kann weitestgehend eingedaemmt werden. Eine fruehe und zuverlaessige Erkennung von Leckagen minimiert deren Auswirkungen und Schaeden. Die Vorschriften hierzu sind laenderspezifisch in den Verordnungen und Richtlinien festgelegt. Fuer die Schweiz gelten die Richtlinien der EKAS. (orig.)

  8. Assessment of the potential of the Mainfranken region, northern Bavaria, for underground storage of geothermal energy; Erkundung des regionalen Potentials fuer die Untergrundspeicherung thermischer Energie in Mainfranken (UTEM)

    Energy Technology Data Exchange (ETDEWEB)

    Barthel, R; Heinrichs, G; Udluft, P [Lehr- und Forschungsbereich Hydrogeologie und Umwelt, Inst. fuer Geologie, Univ. Wuerzburg (Germany); Ebert, H P; Fricke, J [Abt. Waermedaemmung/Waermetransport, Bayerisches Zentrum fuer Angewandte Energieforschung e.V., Wuerzburg (Germany)

    1997-12-01

    The following paper presents a research project that is planned as a cooperation of the Geological Institute, University of Wuerzburg and the Bavarian Center of Applied Energy Research. In this project the potentials for underground thermal energy storage will be investigated in the region of Mainfranken, Northern Bavaria (Main = the river `Main`, Franken = Franconia). All aspects of underground storage will be studied with respect to the specific geographical and geological situation of the area. The study will provide a detailed map of possible storage sites, from which several case studies and at least one demonstration projects will result. (orig.) [Deutsch] Im vorliegenden Beitrag wird ein Forschungsprojekt vorgestellt, das gemeinsam vom Institut fuer Geologie der Universitaet Wuerzburg und dem Zentrum fuer Angewandte Energieforschung in Bayern geplant wird. Ziel des Projekts ist die Erkundung des Potentials fuer die Untergrundspeicherung thermischer Energie in Mainfranken (Nordbayern). Alle Aspekte der Untergrundspeicherung werden regionalspezifisch betrachtet. Neben der Erstellung differenzierter Karten geeigneter Standorte sind Fallstudien und Demonstrationsprojekte in Planung. (orig.)

  9. 3. Workshop on measuring instruments for steady and transient multiphase flow; 3. Workshop: Messtechnik fuer stationaere und transiente Mehrphasenstroemungen

    Energy Technology Data Exchange (ETDEWEB)

    Prasser, H.M. [ed.

    1999-12-01

    The emphasis of the conference was on methods of measurement that show spatial distributions of phase fractions and velocity, particle sizes and bubbles of the disperse phase. Among the methods described were 3D X-ray tomography, grid sensor measurement of velocity profiles, and simultaneous measurement of bubble sizes and gas and liquid flow rates using an optical particle tracking method. Also presented were interesting developments in the field of local probes, e.g. an electrodiffusion probe. Another new development was the attempt to use optical tomography for investigations of two-phase flows. [German] Am 14. Oktober 1999 wurde in Rossendorf die dritte Veranstaltung in einer Serie von Workshops ueber Messtechnik fuer stationaere und transiente Mehrphasenstroemungen durchgefuehrt. Dieses Jahr koennen wir auf 11 interessante Vortraege zurueckblicken. Besonders hervorzuheben sind die beiden Hauptvortraege, die von Herrn Professor Hetsroni aus Haifa und Herrn Dr. Sengpiel aus Karlsruhe gehalten wurden. Ihnen und allen anderen Vortragenden moechten wir herzlich fuer ihren Beitrag zum Gelingen des Workshops danken. Erneut lag ein wichtiger Schwerpunkt auf Messverfahren, die raeumliche Verteilungen von Phasenanteilen und Geschwindigkeiten sowie die Groesse von Partikeln bzw. Blasen der dispersen Phase zugaenglich machen. So wurde ueber einen dreidimensional arbeitenden Roentgentomographen, ein Verfahren zur Messung von Geschwindigkeitsprofilen mit Gittersensoren und eine Methode zur simultanen Messung von Blasengroessen sowie Feldern von Gas- und Fluessigkeitsgeschwindigkeit mit einer optischen Partikelverfolgungstechnik vorgetragen. Daneben wurden interessante Entwicklungen auf dem Gebiet der lokalen Sonden vorgestellt, wie z.B. eine Elektrodiffusionssonde. Neue messtechnische Ansaetze waren ebenfalls vertreten; hervorzuheben ist der Versuch, die Methode der optischen Tomographie fuer die Untersuchung von Zweiphasenstroemungen nutzbar zu machen. (orig.)

  10. Skywards - climate design for the Moscow Federation Tower; Dem Himmel entgegen - Klimadesign fuer den Federation Tower Moskau

    Energy Technology Data Exchange (ETDEWEB)

    Reiser, Claudius [Ebert-Ingenieure GmbH and Co. KG, Competence Center Nachhaltiges Bauen, Nuernberg (Germany)

    2008-06-15

    Advanced simulation tools were used in developing the climate design for the roof covering the taller of the two blocks at Moscow's Federation Tower. The all-glass roof space at a height of 365 m is designed to accommodate the finest and most exclusive hotel areas. Several restaurants, bars and lounges and a Sky Dance Club will offer entertainment and fabulous views across the whole city. Simulations were used to develop and verify a design that ensures thermal comfort taking into account architectural, climate and utilisation requirements. The structure and the building services were simulated based on a 3D model, and simulations were carried out for summer and winter scenarios. This paper describes the design process including load calculations and the development and assessment of the climate design by means of simulation. (Abstract Copyright [2008], Wiley Periodicals, Inc.) [German] In der Entwicklung des Klimakonzeptes der Turmkappe Ost des Federation Towers in Moskau wurden modernste Simulationswerkzeuge eingesetzt. Die vollstaendig glaeserne Turmkappe in 365 m Hoehe soll Raum fuer einen der schoensten und exklusivsten Bereiche des Hotels geben. Diverse Restaurants, Bars und Lounges sowie ein Sky Dance Club sollen einmal zum Verweilen und zur naechtlichen Vergnuegung einladen und dabei stets einen traumhaften Blick ueber die gesamte Stadt ermoeglichen. Mit Hilfe der Simulation wurde fuer die Turmkappe ein Klimakonzept entwickelt und ueberprueft, das die thermische Behaglichkeit unter Beruecksichtigung von Architektur, Klima und Nutzung gewaehrleistet. Dazu wurde die Architektur inklusive der Klimatechnik in einem 3D-Modell abgebildet und fuer den Sommer- und Winterfall berechnet. Der vorliegende Beitrag vollzieht den Planungsablauf von der Lastberechnung bis hin zur Erstellung und Bewertung des Klimakonzeptes in der Simulation. (Abstract Copyright [2008], Wiley Periodicals, Inc.)

  11. Evaluation and development of soil values for the pathway 'soil to plant'. Transfer factors soil to plant; Ueberpruefung und Fortentwicklung der Bodenwerte fuer den Boden-Pflanze-Pfad. Teilbericht 1: Transferfaktoren Boden-Pflanze

    Energy Technology Data Exchange (ETDEWEB)

    Trapp, S.; Matthies, M.; Reiter, B.; Gaeth, S.

    2001-10-01

    Within the research project 'Ueberpruefung und Fortentwicklung der Bodenwerte fuer den Boden-Pflanzen-Pfad', transfer factors soil to plant were calculated for compounds of the substance classes PCB and PAH. Literature studies, experiments undertaken by the LUA/Essen at the lysimeter research station Waldfeucht, and model simulations were used. The transfer differs for the plant species. For kale and wheat straw, the dominant uptake is from air. For lettuce and spinach, a significant uptake from soil was found. The main transport seems to occur via soil resuspension and volatilization, followed by sorption to leaf surfaces. These processes act mainly on low growing harvest products. Uptake from the soil solution and translocation within the plant do not seem to play a role except for phenanthren. The carrots and potatoes investigated showed only a contamination of the peel. The transfer factors of the PCB were throughout higher than that of the PAH. We assume that photolytic processes of PAH on plant surfaces are responsible. Furthermore, there are hints in literature that the metabolism of PAH in plants is faster than that of the PCB. (orig.) [German] Im Rahmen des Forschungsvorhabens 'Ueberpruefung und Fortentwicklung der Bodenwerte fuer den Boden-Pflanze-Pfad' wurden fuer organische Schadstoffe aus den Stoffklassen PCB und PAK Transferfaktoren Boden-Pflanze errechnet. Hierzu wurden Literaturstudien, Experimente der LUA von der Lysimeteranlage Waldfeucht sowie Modellsimulationen eingesetzt. Der Transfer ist fuer die untersuchten Pflanzen nicht einheitlich. Fuer Gruenkohl und Weizenstroh wurde eine Dominanz des Eintrags aus der Luft festgestellt. Demgegenueber zeigte sich fuer Salatpflanzen und Spinat deutliche Aufnahme aus dem Boden. Als Haupttransportweg werden Resuspension von Bodenpartikeln und Ausgasung aus dem Boden mit nachfolgender Sorption an Blattflaechen vermutet. Diese Prozesse wirken vorwiegend auf niedrig wirkende Ernteprodukte

  12. Influence of magnetic and ultrasonic fields on coefficient of reflectivity of GaAs, GaSb and InAs crystals

    International Nuclear Information System (INIS)

    Zaveryukhin, B.N.; Zaveryukhina, N.N.; Zaveryukhina, E.V.; Volodarskiy, V.V.

    2007-01-01

    Full text: Previously we demonstrated for the first time in the world that ultrasonic waves of the megahertz range can change the transport properties and a structure of semiconductors. In this work we have experimentally studied the influence of ultrasonic treatment on the spectral coefficients of reflection R in the magnetic fields of the samples of GaAs-, GaSb- and InAs-crystals. The reflectance spectra in the magnetic field of the samples before and after the ultrasonic treatment (UST) for a certain time were measured in a broad wavelength range including ultraviolet, visible, and infrared spectral regions. The semi-insulating GaAs-crystals had a thickness d=100 μm and a working area S of up to 3sm 2 . The p-GaSb- crystals had an area of S=0.25sm 2 and d =250 μm. The base p-GaSb-layers possessed the concentration N=2·10 17 sm 3 and n-GaSb-layers with a thickness of 0.5 m were created by diffusion doping with phosphorus. Besides, the experiments were performed also for of the n-InAs-crystals. The samples of the InAs-n crystals had a thickness of 100 μm an area S = 0.25 sm 2 . Some remains of sulfuric (S) were discovered in InAs-samples. As could was see from the experiments, all the initial IR spectra measured for the samples with various dopant concentrations NP exhibit maximums (peaks) for 0.2 μm and minimum (holes) for. The reflectance spectra measured after UST for time of t > l hour clearly reveal a shift of the R minima toward longer wavelengths and a general decrease in the reflectance of each sample. The shift of the R is unambiguous evidence of the acoustically stimulated diffusion of impurity (phosphorus) inward of the samples. Discovered peaks and holes slitted and changed their sizes in the magnetic fields. It should be emphasized that behavior of the R spectra of the GaAs-, In As- and GaSb- samples is determined by the same mechanisms. Changes of the R spectra after the UST are explained by acoustically stimulated diffusion of the dopant inward

  13. Next generation DIRCM for 2.1-2.3 micron wavelength based on direct-diode GaSb technology

    Science.gov (United States)

    Dvinelis, Edgaras; Naujokaitė, Greta; Greibus, Mindaugas; Trinkūnas, Augustinas; Vizbaras, Kristijonas; Vizbaras, Augustinas

    2018-02-01

    Continuous advances in low-cost MANPAD heat-seeking missile technology over the past 50 years remains the number one hostile threat to airborne platforms globally responsible for over 60 % of casualties. Laser based directional countermeasure (DIRCM) technology have been deployed to counter the threat. Ideally, a laser based DIRCM system must involve a number of lasers emitting at different spectral bands mimicking the spectral signature of the airborne platform. Up to now, near and mid infrared spectral bands have been covered with semiconductor laser technology and only SWIR band remained with bulky fiber laser technology. Recent technology developments on direct-diode GaSb laser technology at Brolis Semiconductors offer a replacement for the fiber laser source leading to significant improvements by few orders of magnitude in weight, footprint, efficiency and cost. We demonstrate that with careful engineering, several multimode emitters can be combined to provide a directional laser beam with radiant intensity from 10 kW/sr to 60 kW/sr in an ultra-compact hermetic package with weight < 30 g and overall efficiency of 15 % in the 2.1- 2.3 micron spectral band offering 150 times improvement in efficiency and reduction in footprint. We will discuss present results, challenges and future developments for such next-generation integrated direct diode DIRCM modules for SWIR band.

  14. Processes and materials for photovoltaic applications. Workshop; Verfahren und Materialien fuer die Photovoltaik. Workshop

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    Solar energy will surely continue to be the most important renewable energy source. Since 1985, solar cell production has doubled every five years while the per unit price decreased continuously. This trend is expected to continue. Germany made important contributions both in the construction of new solar cell production plants and in the development of new PV materials and material combinations, as well as in technology and PV plant construction. The states of Thuringia and Saxony were significant contributors. In Thuringia, two solar cell production plants were constructed, while Saxon vacuum coating technology was used in nearly all new German production plants. This workshop presented the activities in Thuringia in Saxony. Contacts were to be established between partners from industry and research, joint projects were to be initiated, and society and politicians were to be informed on the success and new chances achieved. The workshop was held on the occasion of the termination of construction and the starting of experimental production of the ANTEC Solar GmbH factory at Rudisleben. [German] Im Mix der erneuerbaren Energien spielt die Solarenergie kuenftig wohl die wichtigste Rolle. Seit 1985 verdoppelt sich die Solarzellenproduktion in jeweils fuenf Jahren, gleichzeitig sank der Preis pro Leistungseinheit kontinuierlich. Dieser Trend wird weiter anhalten. Deutschland leistete in den letzten Jahren wichtige Beitraege zu dieser Entwicklung, sowohl beim Aufbau neuer Fertigungskapazitaeten fuer Solarzellen, als auch bei der Entwicklung neuer Photovoltaik-Materialien bzw. -Materialkombinationen und auf den Gebieten der Technologie und des Anlagenbaus. Der Anteil Thueringens und Sachsens an dieser positiven Entwicklung ist groesser als generell vermutet. In Thueringen entstanden zwei Unternehmen fuer die Solarzellenproduktion, der saechsische Vakuumbeschichtungs-Anlagenbau war am Aufbau fast aller neuen deutschen Fertigungsstaetten beteiligt. Auf dem Workshop werden

  15. Telematics for hazardous goods transportation; Anwendungen fuer den Transport von kritischen Guetern

    Energy Technology Data Exchange (ETDEWEB)

    Stingl, D [Danzas Logistics GmbH, Hamburg (Germany)

    1999-07-01

    In the course of the integration of the customer Langnese Iglo in autumn 1997 and in view of the already existing general conditions for the implementation of the equlations of the directive on food hygiene (HACCP-concept) as well as the permanently in reasing demand for quality of logistics DANZAS Logistics GmbH, cooperating closely with in deep-frozen goods customer Langnese-Iglo decided to develop a new system of quality assurance for the transportation of deep-frozen goods and apply this system to all its activities. First ideas about standard demands, technical solutions and multi-functional design showed that the project had to be handled in such a flexible way that temperature controlling (for the transportation of deep-frozen goods, temperature-controlled DANZAS-warehouses and all future temperature-controlled transportation) and the monitoring of security-relevant transportation can be integrated in one and the same project. (orig.) [German] Im Zuge der Integration des Kunden Langnese Iglo im Herbst 1997 und unter Beruecksichtigung der bereits vorliegenden Rahmenbedingungen zur Umsetzung der Bestimmungen der Lebensmittelhygieneverordnung (HACCP-Konzept) sowie des staendig wachsenden Qualitaetsanspruches an logistische Dienstleistungen, hat sich die DANZAS Logistics GmbH in enger Zusammenarbeit mit dem TK-Kunden Langnese Iglo entschlossen, ein innovatives System zur Qualitaetssicherung im Tiefkuehltransport zu erarbeiten und flaechendeckend einzusetzen. Die ersten Gedanken bezueglich Standardanforderungen, technischer Loesungsansaetze und multifunktionaler Ausrichtung zeigten, dass dieses Projekt so variabel zu gestalten ist, dass sowohl Temperaturcontrolling (fuer TK-Transporte, fuer die temperaturgefuehrten DANZAS-Laeger und zukuenftig alle temperaturgefuehrten Transporte) als auch die Ueberwachung sicherheitsrelevanter Transporte zu integrieren sind. (orig.)

  16. The Institute for Mining Science I at the Rhineland-Westphalia Technological University in Aachen; Das Institut fuer Bergbaukunde I der RWTH Aachen

    Energy Technology Data Exchange (ETDEWEB)

    Martens, P.N.; Moellerherm, S.; Rattmann, L. [Technische Hochschule Aachen (Germany). Lehrstuhl und Inst. fuer Bergbaukunde 1

    2001-02-08

    The Institute for Mining Science I has been associated with the extraction of raw materials for over one hundred years. The main areas of work of the Institute have always been adapted to current requirements according to general developments in the raw materials sector and in this environment. The work in research and teaching has recently been extended by new fields. Today mining and sustained handling of resources, geotechnics, raw material management and underground disposal of waste are examples of parts of a comprehensive range of competences. The close interlinking of theory and practice allows students to broaden their knowledge in interdisciplinary and international projects. The graduates are thus prepared in an excellent manner for their future tasks. (orig.) [German] Seit ueber hundert Jahren steht das Institut fuer Bergbaukunde I fuer Gewinnung von Rohstoffen. Schwerpunkte der Arbeiten des Instituts wurden, allgemeinen Entwicklungen in der Rohstoffbranche und in deren Umfeld entsprechend, stets den aktuellen Erfordernissen angepasst. Die Arbeit in Forschung und Lehre ist in den letzten Jahren um neue Bereiche erweitert worden. Heute sind Bergbau und nachhaltiger Umfang mit Ressourcen, Geotechnik, Rohstoffwirtschaft sowie untertaegige Abfallentsorgung als Beispiele fuer Teile eines umfassenden Kompetenzspektrums zu nennen. Die enge Verzahnung von Theorie und Praxis ermoeglicht Studierenden, ihre Kenntnisse fruehzeitig in interdisziplinaeren und internationalen Projekten zu vertiefen. Damit werden die Absolventen auf ihre zukuenftigen Aufgaben in hervorragender Weise vorbereitet. (orig.)

  17. Photovoltaics for appliances and small systems. Enhancement of the PVS for Windows simulation program for development and simulation of PV appliances and small systems. Final report; Photovoltaik fuer Geraete und Kleinsysteme. Erweiterung des Simulationsprogramms PVS fuer Windows zur Entwicklung und Simulation von PV-versorgten Geraeten und Kleinsystemen. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Vogt, R.; Imann, C.; Jung, V.

    2002-06-28

    The PVS simulation program for Windows was to be extended to the development and simulation of PV-supported equipment and small systems. The following new functions were to be integrated: a) Simulation and dimensioning of indoor power supply of systems with different light sources and independent outdoor systems. b)Integration of small wind generators in the simulation and dimensioning of isolated autonomous systems, including wind data and a component database for small wind turbines; c) Differentiation of the PVS battery model for different battery types (lead, Ni/Cd, Li etc.), optimized operating strategies and flexible dimensioning including an additional component database for battery types; d) Extensive cost analysis for PV-supported appliances and small systems, from investments to consumption, operation and maintenance. This will facilitate investment decisions and help systems of this type along in the market. All program components were designed for high flexibility. Users should be able to vary as many parameters as possible, and to generate and modify their own records. The current project focused on the user interface, i.e. input, data processing, and output. Parallel to this, the Fraunhofer ISE Institute worked on modifications of the computer hardware. [German] Das Projekt zielte auf eine Erweiterung des Simulationsprogramms PVS fuer Windows zur Entwicklung und Simulation von PV-versorgten Geraeten und Kleinsystemen hin. Das Entwicklungsprodukt sollte zusaetzlich zu den bisherigen Funktionen insbesondere Folgendes leisten: (a) Simulation und Dimensionierung der Energieversorgung von Geraeten im Indoor-Bereich, wobei unterschiedliche Lichtquellen verarbeitet werden muessen, sowie von sonstigen netzfreien (Outdoor-) Kleinsystemen. (b) Einbindung kleiner Windgeneratoren in die Simulation und Dimensionierung von netzfernen Systemen (Insel-Anlagen), einschliesslich Bereitstellung der Wind-Daten und einer zusaetzlichen Komponenten-Datenbank fuer kleine

  18. Insights inot the atomic many-particle dynamics of scattering processes by ab-initio calculations; Einblicke in die atomare Vielteilchendynamik von Streuprozessen durch ab-initio-Rechnungen

    Energy Technology Data Exchange (ETDEWEB)

    Zapukhlyak, Myroslav

    2008-12-05

    The present thesis gives a theoretical contribution to the understanding of the many-particle dynamics in inelastic ion-atom collisions. Many-electron dynamics in ion-helium collisions and proton-sodium collisions was theoretically studied. The description is based on the semiclassical approximation with the straight orbit for the projectile motion. The ion-atom collision problem is by this reduced to a time-dependent many-electron problem and in the non-relativistic approximation described by the time-dependent Schroedinger equation. The solution of the many-electron problem pursues in the framework of the time-dependent density functional theory. The time-dependent Schroedinger equation for the interacting many-electron problem is transformed to the system of the time-dependent Kohn-Sham equations and solved by the two-center-basis generator method. The unknown time-dependent exchange-correlation one-particle potential forces different approximation in the time-dependent Kohn-Shan scheme. In this thesis the model of the independent electrons was applied as basis model, in which the electron-electron correlation is consistently neglected in all parts and in all steps. Differential cross sections for different one- and two-electron processes were calculated in the so-called eikonal approximation for the collisional systems p-He, He{sup 2+}-He, and Ar{sup q+}-He (q=15-18). [German] Die vorliegende Arbeit leistet einen theoretischen Beitrag zum Verstaendnis der Vielteilchendynamik in inelastischen Ion-Atom-Stoessen. Vielelektronendynamik in Ion-Helium-Stoessen und Proton-Natrium-Stoessen wurde theoretisch untersucht. Die Beschreibung basiert auf der semiklassischen Naeherung mit der geraden Bahn fuer die Projektilbewegung. Das Ion-Atom- Stossproblem wird damit auf ein zeitabhaengiges Vielelektronenproblem reduziert und in der nichtrelativistischen Naeherung mit der zeitabhaengigen Schroedinger-Gleichung beschrieben. Die Loesung des Vielelektronenproblems erfolgt im

  19. Simple Stirling engine as cogeneration unit in residential areas; Einfacher Stirling-Motor fuer die Waerme-Kraft-Kopplung (WKK) in kleinen Wohngebaeuden

    Energy Technology Data Exchange (ETDEWEB)

    Budliger, J.P.

    2000-07-01

    Free-piston Stirling engines have been recognized for long as an ideally suited unit for combined heat and power (CHP) production in homes. The considerably improved use of fossil fuel as compared to their separate production, the clean, external combustion process and low noise are major assets, favouring the use of this technology in residential areas. However, up to present, the complexity and correspondingly high cost of these units hampered their practical application. A new, simple concept has recently been devised, which can easily be controlled and operated according to demand. Cost may be reduced substantially as compared to presently known concepts, giving promise for their widespread use in residential homes, as well as in a variety of other applications. (orig.) [German] Freikolben-Stirling-Motoren sind ideale Aggregate fuer die Waerme-Kraft-Kopplung (WKK oder KWK) in kleineren Wohnhaeusern. Der Brennstoff kann wesentlich besser genutzt werden als bei getrennter Bereitung der benoetigten Heizwaerme und der elektrischen Energie. Die saubere, kontinuierliche aeussere Verbrennung und der geringe abgegebene Laerm stellen wichtige Bedingungen fuer einen erfolgreichen Einsatz solcher Systeme im Wohnbereich dar. Bisher verhinderten aber die Komplexitaet der verfuegbaren Systeme den praktischen Einsatz dieser Einheiten. Im Folgenden wird ein neues, einfaches Konzept vorgestellt, welches zuverlaessig funktioniert und auch unter Teillast, dem benoetigten Waermebedarf genau angepasst, betrieben werden kann. Die Herstellungskosten sind wesentlich geringer als bei den bisher bekannten Systemen, was ideale Voraussetzungen fuer deren verbreitete Anwendung im Haushalt, wie in vielfaeltigen anderen Einsatzgebieten darstellt. (orig.)

  20. Fracture-mechanical analysis of metal/ceramic composites for applications in high-temperature fuel cells (SOFC); Bruchmechanische Untersuchung von Metall/Keramik-Verbunsystemen fuer die Anwendung in der Hochtemperaturbrennstoffzelle (SOFC)

    Energy Technology Data Exchange (ETDEWEB)

    Kuhn, Bernd Josef

    2008-08-25

    The author investigated the deformation and damage behaviour of soldered ceramic/metal joints in SOFC stacks, using thermochemical methods. Methods for analyzing sandwich systems and for mechanical characterization of joints were adapted and modified in order to provide fundamental understanding of the mechanical properties of soldered joints. [German] In dieser Arbeit wurde das Verformungs- und Schaedigungsverhalten von Keramik/ Metall-Loetverbindungen fuer SOFC-Stacks thermomechanisch untersucht. Verfahren zur Analyse von Schichtsystemen und fuer die mechanische Charakterisierung von Fuegeverbindungen wurden adaptiert und weiterentwickelt, um zu einem grundlegenden Verstaendnis der mechanischen Eigenschaften von Loetverbindungen zu gelangen.

  1. Imaging technique and current status of valvular heart disease using cardiac MRI; Untersuchungstechniken und Stellenwert der MRT bei der Diagnostik von Herzklappenerkrankungen

    Energy Technology Data Exchange (ETDEWEB)

    Lotz, J.; Sohns, J.M. [Universitaetsmedizin Goettingen, Georg-August-Universitaet, Institut fuer Diagnostische und Interventionelle Radiologie, Goettingen (Germany)

    2013-10-15

    The main indications for cardiac magnetic resonance imaging (MRI) in the evaluation of valvular heart disease are pathologies of the aortic and pulmonary valve. For mitral and tricuspid valve pathologies MRI is not the first line modality as these are usually well visualized by echocardiography. The advantages of MRI in valvular heart disease are a high reliability in the evaluation of ventricular volumes and function as well as the assessment of the perivalvular arterial or atrial structures. This reliability and the limitless access to any imaging plane partially compensates for the lower temporal and spatial resolution in comparison to echocardiography. In patients with congenital heart disease, cardiac MRI is established as a valuable diagnostic tool in daily clinical management, especially for the evaluation of pulmonary valve defects. Nevertheless, echocardiography remains the first-line diagnostic imaging tool for the foreseeable future. (orig.) [German] Die Untersuchung der Herzklappen in der MRT umfasst derzeit v. a. die Aorten- und Pulmonalisklappe. Pathologien der atrioventrikulaeren Klappen bilden demgegenueber nur selten die zentrale Fragestellung einer kardialen MRT-Untersuchung, da diese normalerweise einer echokardiographischen Untersuchung gut zugaenglich sind. Die Staerke der MRT ist die hohe Zuverlaessigkeit, mit der neben der Klappenmorphologie und -funktion die Funktionsparameter des jeweiligen Ventrikels und die Morphologie der nachgeschalteten Arterien bestimmt werden koennen. Dadurch kann die MRT die prinzipielle Schwaeche in der Orts- und Zeitaufloesung gegenueber der Echokardiographie teilweise kompensieren. Bei Patienten mit kongenitalen Herzvitien ist die MRT-basierte Klappendiagnostik fester Bestandteil des klinischen Managements. Das gilt besonders fuer die Evaluation der Pulmonalisklappe. Die Echokardiographie bleibt absehbar die Modalitaet der ersten Wahl fuer die Klappendiagnostik am Herzen. (orig.)

  2. Pumps for cryogenic liquids with superconducting magnetic bearings. Final report; Pumpen fuer kryogene Fluessigkeiten mit supraleitenden Magnetlagern. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Gerlach, G.; Fuchs, G.; Sorber, J.; Brosche, H.; Richter, M.; Frenzel, C.

    2000-07-01

    A liquid nitrogen pump with contactless superconducting magnetic bearings was to be developed on the basis of an available motor with superconducting bearings. Contactless superconducting magnetic bearings require practically no servicing. A high demand for pumps for cryogenic liquids is expected with the impending use of hydrogen as an energy source. The pumping of liquid nitrogen was demonstrated successfully with the new test aggregate. The maximum pumped volume was 17 l/min at a lift of 0.5 m and 6 l/min at a lift of 1 m. In all, 15 hours of operation were registered in the superconducting state of the bearing, which included 2 hours of uninterrupted pump operation. The higher speed range for which magnetic bearings are optimally suited was not reached. Operation at higher frequencies was impossible either because of stronger resonance amplituees or because the power system was too weak. [German] Ziel des Vorhabens war die Entwicklung einer Pumpe fuer fluessigen Stickstoff mit beruehrungslosen supraleitenden Magnetlagern auf der Basis eines vorhandenen supraleitend gelagerten Motors. Die beruehrungslose supraleitende Magnetlager sind praktisch wartungsfrei. Ein Bedarf an Pumpen fuer kryogene Fluessigkeiten entsteht insbesondere durch den in naher Zukunft zu erwartenden Einsatz von Wasserstoff als Energietraeger. Mit dem entworfenen Aggregat wurde das Pumpen von Fluessigstickstoff erfolgreich demonstriert. Der Foerderstrom betrug bei 0,5m Foerderhoehe maximal 17 l/min; beim 1m Foerderhoehe wurden maximal 6 l/min gemessen. Es wurden insgesamt ca. 15 Betriebsstunden in supraleitenden Zustand des Lagers, darunter 2 Stunden ununterbrochener Pumpbetrieb registriert. Der hoehere Drehzahlbereich, fuer den das Magnetlager eigentlich paedestiniert ist, konnte nicht erreicht werden. Ein Betrieb bei hoeheren (Ist-)Frequenzen war nicht moeglich, entweder durch staerkere Resonanzausschlaege oder durch einen zu schwachen Antrieb. (orig.)

  3. Big like a gym. New business models for public utilities; Gross wie eine Turnhalle. Neue Geschaeftsmodelle fuer Stadtwerke

    Energy Technology Data Exchange (ETDEWEB)

    Schwarzburger, Heiko

    2013-10-01

    Electricity storage is no longer a vision, also in the case of greater power ratings too. The breakthrough is done: ready-to-connect systems are available as complete packages or containers. [German] Stromspeicher sind keine Vision mehr. Auch nicht fuer grosse Leistungen. Der Durchbruch ist geschafft: Anschlussfertige Systeme sind als Container oder Gesamtpakete verfuegbar.

  4. Ion-beam enhanced etching for the 3D structuration of lithium niobate; Ionenstrahlverstaerktes Aetzen fuer die 3D-Strukturierung von Lithiumniobat

    Energy Technology Data Exchange (ETDEWEB)

    Gischkat, Thomas

    2010-01-12

    The present thesis deals with the usage of the ion-beam enhanced etching (IBEE) for the 3D structuration of lithium niobate (LiNbO{sub 3}).Hereby the approach of the enhancement of the wet-chemical etching rate due to the irradiation with energetic ions is pursued. This method is very success promising for the realization of micro- and nanostructures with perpendicular structural walls as well as small roughnesses. The aim of this thesis consisted therein to form the foundations for the realization of three-dimensional micro- and nanostructures (for instance: Layer systems and photonic crystals) in LiNbO{sub 3} with high optical quality and to demonstrate on selected examples. Conditions for the success of the IBEE structuration technique is first of all the understanding of the defect formation under ion irradiation as well as the radiation-induced structure changes in the crystal and the change of the chemical resistance connected with this. For this the defect formation was studied in dependence on th ion mass, the ion energy, and the irradiation temperature. Thermally induced influences and effects on the radiation damage, as they can occur in intermediate steps in the complex processing, must be known and were studied by means of subsequent temperature treatment. The results from the defect studies were subsequently applied for the fabrication of micro- and nanostructures in LiNbO{sub 3}. Shown is the realization of lateral structure with nearly perpendicular structure walls as well as the realization of thin membranes and slits. The subsequent combination of lateral structuration with the fabrication of thin membranes and slits allowed the three-dimensional structuration of LiNbO{sub 3}. This is exemplarily shown for a microresonator and for a 2D photonic crystal with below lying air slit. [German] Die vorliegende Arbeit beschaeftigt sich mit der Ausnutzung des ionenstrahlverstaerkten Aetzens (IBEE: Ion Beam Enhanced Etching) fuer die 3D-Strukturierung von

  5. Mega hub for intermodal transport - the planning of the most advanced container terminal in the world; Mega-Drehscheibe fuer den Kombinierten Verkehr - Planung des modernsten Containerbahnhofes der Welt

    Energy Technology Data Exchange (ETDEWEB)

    Franke, K.P. [Noell Stahl- und Maschinenbau GmbH, Wuerzburg (Germany). Abt. Hafentechnik

    1998-12-31

    The introduction of innovative mega hub systems for the operation of cargo trains is a promising starting point for increasing the efficiency of intermodal transport. A first mega hub as it is known has been planned for Northern Germany with its centre in Lehrte near Hannover. Instead of shunting the waggons, containers will be transferred from train to train at the mega hub. This is not only faster, but also more economical and thus more attractive to rail transport clients. No other known system can achieve such high transhipment/shunting capacities per surface unit. The design of the system guarantees the maximum degree of flexibility in transhipment operations. A high degree of automation will ensure the quality and speed of transhipment. The technical development of the fast transhipment system (FTS) by Noell has been completed. (orig.) [Deutsch] Ein vielversprechender Ansatz fuer die Steigerung der Leistungsfaehigkeit des Kombinierten Verkehrs (KV) ist die Einfuehrung von innovativen Drehscheibensystemen fuer den Betrieb der Cargo-Zuege. Eine erste sogenannte Mega-Drehscheibe wurde fuer den Norden Deutschlands mit Zentrum Lehrte bei Hannover geplant. Statt zu rangieren sollen in der Mega-Drehscheibe die Behaelter zwischen den Zuegen umsteigen. Das ist schneller, kostenguenstiger und damit attraktiver fuer den Bahnkunden. Darueber hinaus ist kein System bekannt, bei dem eine so hohe Umschlag-/Umstelleistung je Flaecheneinheit realisiert werden kann. Die Gestaltung der Anlage gewaehrt eine maximale Flexibilitaet im Umschlagbetrieb. Ein hoher Automatisierungsgrad wird Qualitaet und Schnelligkeit des Umschlages sichern. Die technische Entwicklung der Schnellumschlagtechnik seitens Noell ist abgeschlossen. (orig.)

  6. Detailed data set of a large administration building as a validation model for DIN V18599-software; Umfangreicher Validierungsdatensatz eines grossen Verwaltungsgebaeudes fuer Software zur DIN V 18599

    Energy Technology Data Exchange (ETDEWEB)

    Hoettges, Kirsten; Woessner, Simon; de Boer, Jan; Erhorn, Hans [Fraunhofer-Institut fuer Bauphysik (IBP), Abt. Energiesysteme, Kassel (Germany); Fraunhofer-Institut fuer Bauphysik (IBP), Stuttgart (Germany)

    2009-04-15

    The calculation method of DIN V 18599 represents a very complex model for the estimation of the energy efficiency of buildings. The method is used for certificates too, thus, the number of users is quite high. This fact and the complexity of the method causes high demands on the related software products. Most of the end user software tools work with the calculation engine ibp18599kernel developed by Fraunhofer-Institut for Building Physics. There is a continuous quality control for both, the kernel and the user interfaces, i.e. the end user software. This paper gives an overview of the process of quality control as well as a documentation of a validation model used within this process, i.e. a complex administration building as a sample. (Abstract Copyright [2009], Wiley Periodicals, Inc.) [German] Mit dem Berechnungsverfahren der DIN V 18599 liegt ein umfassendes Berechnungsmodell fuer die energetische Bewertung von Gebaeuden vor. Der grosse Umfang der Verfahren stellt auch an die softwaretechnischen Umsetzungen fuer die Planungspraxis hohe Anforderungen. Das Fraunhofer-Institut fuer Bauphysik hat hierzu den Rechenkern ibp18599kernel entwickelt, der zwischenzeit-lich von zahlreichen Softwarehaeusern fuer Endanwendungsprogramme zur energetischen Bewertung und Erstellung von Energieausweisen eingesetzt wird. Dieser ''Rechenmotor'' unterliegt einer steten Qualitaetskontrolle zur Sicherstellung der Berechnungsgenauigkeit. Der vorliegende Aufsatz stellt den Prozess der Qualitaetssicherung anhand eines neuen Validierungsbeispiels in Form eines komplexen Verwaltungsgebaeudes vor. Die Fallstudie kann auch zur Validierung anderer Berechnungssysteme, die nicht auf dem Rechenkern basieren, genutzt werden. (Abstract Copyright [2009], Wiley Periodicals, Inc.)

  7. Alternative drives for motor cars. Hybrid systems, fuel cells, alternative energy sources. 2. enl. ed.; Alternative Antriebe fuer Automobile. Hybridsysteme, Brennstoffzellen, alternative Energietraeger

    Energy Technology Data Exchange (ETDEWEB)

    Stan, Cornel [Berkeley Univ., CA (United States)]|[Paris Univ. (France)]|[Pisa Univ. (Italy)]|[Perugia Univ. (Italy)]|[Westsaechsischen Hochschule Zwickau (Germany)

    2008-07-01

    The implementation possibilities of future drive concepts - from hybrid systems comprising an electric motor and an internal combustion engine to fuel cells to alternative fuels like hydrogen or alcohol - will depend largely on quality criteria, e.g. power density, rotary momentum, acceleration characteristics, specific energy consumption, emissions of chemical substances, and noise. The boundary criteria for the introduction of realizeable concepts of alternative drives for motor cars will be defined by the availability and storability of the envisaged fuels, technical complexity, cost, safety, infrastructure and service. The book presents and analyzes the processes, drives and energy sources that can be combined in complex energy management systems for motor cars in accordance with the aforementioned criteria. Knowledge about these facts is indispensable for the development of new concepts. The 2nd edition describes many new developments in car propulsion systems as well as their combinations, new energy sources, energy converters and energy stores. All contents and literature reflect the latest state of science and technology. (orig.) [German] Ueber die Realisierungsmoeglichkeiten zukuenftiger Antriebskonzepte - von Hybridsystemen Elektro-/Verbrennungsmotor ueber Brennstoffzellen bis zu alternativen Energietraegern wie Wasserstoff oder Alkohol - werden fundierte Kriterien der Qualitaet eines Antriebs entscheiden. Leistungsdichte, Drehmomentverlauf, Beschleunigungscharakteristik, spezifischer Energieverbrauch sowie Emission chemischer Stoffe und Geraeusche sind dafuer wichtige Merkmale zur Qualitaetsbeurteilung. Die Verfuegbarkeit und die Speicherfaehigkeit vorgesehener Energietraeger, die technische Komplexitaet, Kosten, Sicherheit, Infrastruktur und Service werden die Randbedingungen fuer die Einfuehrung realisierbarer Konzepte alternativer Antriebe fuer Automobile stellen. Die Uebersicht und die Analyse der Prozesse, Antriebsmaschinen und Energietraeger, die

  8. Application of the results of pipe stress analyses into fracture mechanics defect analyses for welds of nuclear piping components; Uebernahme der Ergebnisse von Rohrsystemanalysen (Spannungsanalysen) fuer bruchmechanische Fehlerbewertungen fuer Schweissnaehte an Rohrleitungsbauteilen in kerntechnischen Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Dittmar, S.; Neubrech, G.E.; Wernicke, R. [TUeV Nord SysTec GmbH und Co.KG (Germany); Rieck, D. [IGN Ingenieurgesellschaft Nord mbH und Co.KG (Germany)

    2008-07-01

    For the fracture mechanical assessment of postulated or detected crack-like defects in welds of piping systems it is necessary to know the stresses in the un-cracked component normal to the crack plane. Results of piping stress analyses may be used if these are evaluated for the locations of the welds in the piping system. Using stress enhancing factors (stress indices, stress factors) the needed stress components are calculated from the component specific sectional loads (forces and moments). For this procedure the tabulated stress enhancing factors, given in the standards (ASME Code, German KTA regulations) for determination and limitation of the effective stresses, are not always and immediately adequate for the calculation of the stress component normal to the crack plane. The contribution shows fundamental possibilities and validity limits for adoption of the results of piping system analyses for the fracture mechanical evaluation of axial and circumferential defects in welded joints, with special emphasis on typical piping system components (straight pipe, elbow, pipe fitting, T-joint). The lecture is supposed to contribute to the standardization of a code compliant and task-related use of the piping system analysis results for fracture mechanical failure assessment. [German] Fuer die bruchmechanische Bewertung von postulierten oder bei der wiederkehrenden zerstoerungsfreien Pruefung detektierten rissartigen Fehlern in Schweissnaehten von Rohrsystemen werden die Spannungen in der ungerissenen Bauteilwand senkrecht zur Rissebene benoetigt. Hierfuer koennen die Ergebnisse von Rohrsystemanalysen (Spannungsanalysen) genutzt werden, wenn sie fuer die Orte der Schweissnaehte im Rohrsystem ausgewertet werden. Mit Hilfe von Spannungserhoehungsfaktoren (Spannungsindizes, Spannungsbeiwerten) werden aus den komponentenweise berechneten Schnittlasten (Kraefte und Momente) die benoetigten Spannungskomponenten berechnet. Dabei sind jedoch die in den Regelwerken (ASME

  9. Symposium on hydrogen technology and fuel cells - opportunities for the economy; Symposium Wassertechnologie und Brennstoffzellen - Chancen fuer die Wirtschaft

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This volume contains 17 contributions on fuel cell technology and on the infrastructure required for hydrogen production and supply, in the form of abstracts and short reports. [German] Dieser Band enthaelt 17 Beitraege zum Themenkreis Brennstoffzellentechnologie und die dazu erforderliche Infrastruktur fuer die Wasserstofferzeugung und -versorgung in Form von Kurzfassungen und Vortragsfolien.

  10. Surface imaging, portal imaging, and skin marker set-up vs. CBCT for radiotherapy of the thorax and pelvis

    Energy Technology Data Exchange (ETDEWEB)

    Pallotta, Stefania; Bucciolini, Marta [Universita degli Studi di Firenze, Dipartimento di Scienze Biomediche Sperimentali e Cliniche, Florence (Italy); AOU Careggi, Sezione di Fisica Medica, Florence (Italy); Vanzi, Eleonora; Marrazzo, Livia [AOU Careggi, Sezione di Fisica Medica, Florence (Italy); Simontacchi, Gabriele; Paiar, Fabiola [AOU Careggi, Sezione di Radioterapia, Florence (Italy); Ceroti, Marco [ISPO, U.O. Epidemiologia Molecolare e Nutrizionale, Florence (Italy); Livi, Lorenzo [Universita degli Studi di Firenze, Dipartimento di Scienze Biomediche Sperimentali e Cliniche, Florence (Italy); AOU Careggi, Sezione di Radioterapia, Florence (Italy)

    2015-09-15

    The aim of this study was to compare surface imaging, portal imaging, and skin marker set-up in radiotherapy of thoracic and pelvic regions, using cone beam computed tomography (CBCT) data as the gold standard. Twenty patients were included in this study. CBCT, surface acquisition (SA), and two orthogonal portal images (PI) were acquired during the first four treatment sessions. Patient set-up corrections, obtained by registering the planning CT with CBCT, were used as the gold standard. Registration results of the PI and SA were evaluated and compared with those obtained with CBCT. The advantage derived from using SA or PI verification systems over a skin marker set-up was also quantified. A statistically significant difference between PI and SA (in favour of PI) was observed in seven patients undergoing treatment of the pelvic region and in two patients undergoing treatment of the thoracic region. The use of SA or PI, compared with a skin marker set-up, improved patient positioning in 50% and 57 % of the thoracic fractions, respectively. For pelvic fractions, the use of PI was beneficial in 73 % of the cases, while the use of SA was beneficial in only 45 %. Patient positioning worsened with SA, particularly along longitudinal and vertical directions. PI yielded more accurate registration results than SA for both pelvic and thoracic fractions. Compared with the skin marker set-up, PI performances were superior to SA for pelvic fractions while comparable results were obtained for thoracic fractions. (orig.) [German] Ziel dieser Studie ist der Vergleich der Patientenpositionierung mittels der 3-D/4-D-Erfassung der Patientenoberflaeche durch ein Abtastsystem, kV/MV-Verifikationsaufnahmen mit Hochenergiebildsystemen und Markierungen auf der Haut bei Bestrahlungen im Thorax- bzw. Beckenbereich. Als Goldstandard zum Vergleich dienten CBCT(''cone beam computed tomography'')-Aufnahmen. Die Studie basiert auf Untersuchungen an 20 Patienten. Es wurden

  11. Concept for inland wind power plants and wind parks - an example from North-Rhine Westphalia; Rahmenkonzept fuer Windkraftanlagen und -parks im Binnenland - ein Beipiel aus Nordrhein-Westfalen

    Energy Technology Data Exchange (ETDEWEB)

    Kleinschmidt, V. [UVP-Forschungsstelle, Fachgebiet Landschaftsoekologie und Landschaftsplanung, Fachbereich Raumplanung, Dortmund Univ. (Germany); Schauerte-Lueke, N. [UVP-Forschungsstelle, Fachgebiet Landschaftsoekologie und Landschaftsplanung, Fachbereich Raumplanung, Dortmund Univ. (Germany); Bergmann, R. [PRO TERRA TEAM Dienstleistungs- und Forschungsgesellschaft fuer Umwelttechnologien GmbH und Co. KG, Dortmund (Germany)

    1994-12-31

    Because of the increasing number of wind energy plants, environmental protection gets into a conflict of aims. On the one hand the change of the `Stromeinspeisungsgesetz` (law arranging the insertion of privately produced electricity into the public system) and the improved support for wind energy plants is to appreciate for the reasons of a reduction of CO{sub 2} and other harmful substances. But on the other hand wind energy plants have negative environmental effects onto the sites they are built on, as for example disturbances of the birds their breeding nest and feeding habitat, injury or death following collision with a blade or tower or simply disturbances of the landscape view. To avoid possible conflicts and increase the acceptance of wind energy plants, for the district of Soest a concept on a strategic level was developed, in which sites were determined as optimal, restrictional or excluding the construction of wind energy plants. This concept may not only help to avoid conflicts but may also play an active part in the promotion of wind energy plants by defining the sites suitable for wind energy plants and making them public. All in all the procedure of approval was simplified and therefore accelerated with the invention of this concept. (orig.) [Deutsch] Durch die zunehmende Anzahl von Windkraftanlagen geraet der Umweltschutz in einen Zielkonflikt. Einerseits ist die Aenderung des Stromeinspeisungsgesetzes und die verbesserte Foerderung fuer Windkraftanlagen aus Gruenden der CO{sub 2} und Schadstoffemissionseinsparungen sehr zu begruessen. Andererseits haben die Windkraftanlagen direkt an den Aufstellungsorten negative Auswirkungen auf die Umwelt, wie zum Beispiel Stoerung der Voegel in Nahrungs- und Bruthabitaten, Vogelschlag oder Beeintraechtigung des Landschaftsbildes. Um moegliche Konflikte weitgehend zu vermeiden und die Akzeptanz fuer Windkraftanlagen zu erhoehen, wurde fuer den Kreis Soest ein Rahmenkonzept erarbeitet, in dem Gunst-, Restriktions

  12. A regional climate model for the Arctic and the North Atlantic; Ein regionales Klimamodell fuer die Arktis und den Nordatlantik

    Energy Technology Data Exchange (ETDEWEB)

    Berndt, H

    2001-07-01

    corresponding a low influence of the lateral boundary conditions. Overall, REMO has proved to be a useful tool for a better understanding of the processes in the Arctic and the North Atlantic. Further adjustment of the parameterizations seems to be necessary. Other components of the climate system have to be considered to successfully describe the complex feedbacks and processes of the climate subsystems. (orig.) [German] Die Arktis und der subpolare Nordatlantik bilden mit ihren komplexen Mechanismen und Rueckkopplungen eine wichtige Komponente unseres Klimasystems. Aufgrund der geringen Beobachtungsdichte und der niedrigen Aufloesung globaler Klimamodelle, bietet sich der Einsatz hoeher aufloesender regionaler Klimamodelle an. Das hier verwendete regionale Klimamodell (REMO) basiert auf dem frueheren Wettervorhersagemodell EM des Deutschen Wetterdienstes (DWD) und wurde am Max-Planck-Institut fuer Meteorologie (MPIfM) in Hamburg weiterentwickelt. Fuer die Simulation subskaliger Prozesse stehen zwei Saetze physikalischer Parametrisierungen zur Verfuegung - die urspruenglich verwendete DWD-Physik und die ECHAM4-Physik des MPIfM. Der dynamische Teil ist in beiden Faellen identisch. REMO wird zunaechst an das neue Untersuchungsgebiet angepasst. Die neue Konfiguration beruecksichtigt bei einer horizontalen Aufloesung von 0.5 x 0.5 und 145 x 121 Glitterpunkten die gesamte Arktis und den Nordatlantik bis etwa 40 N. Mit DWD- und ECHAM4-Physik im Vorhersage- und Klima-Mode werden unterschiedliche Zeitraeume simuliert. Als Antriebsdaten werden die NCEP/NCAR-Reanalysen mit einer zeitlichen Aufloesung von 6 Stunden verwendet. Da REMO bisher nur in gemaessigtem Klima eingesetzt wurde, steht der Test des Modells unter den extremen Bedingungen der hohen Breiten im Vordergrund. Beim Vergleich mit Schiffsbeobachtungen aus der Labrador-See liegt REMO deutlich dichter an den Messungen als die Antriebsdaten. Unrealistisch hohe Feuchten in den Reanalysen sind vermutlich die Ursache erhoehter

  13. Critical review of the >>Stellungnahme zur 'deutschen Risikostudie' der Gesellschaft fuer Reaktorsicherheit (GRS)<< by the Bremer Arbeits- und Umweltschutz-Zentrum

    International Nuclear Information System (INIS)

    Danzmann, H.J.

    1981-08-01

    In August 1979, the German Risk Study was presented to the public by the Federal Minister of Research and Technology. The main contractor to prepare the German Risk Study is the Gesellschaft fuer Reaktorsicherheit (GRS). The objective of the Study is to investigate the collective risk involved in accidents at nuclear power plants. The essential results and statements of the Study are comprised in a Summary submitted to the public in August 1979, too. In September 1979, the 'Bremer Arbeits- und Umweltschutz-Zentrum' ('BAUZ') published a 'Stellungnahme zur 'deutschen Risikostudie' der Gesellschaft fuer Reaktorsicherheit (GRS)' (Review of the German Risk Study of the Gesellschaft fuer Reaktorsicherheit), dealing only with the summary of this study, however. The BAUZ review is extremely critical of the German Risk Study and ends in condemning the peaceful utilization of nuclear energy as well as the competent authorities. The GRS review critique in hand scrutinizes the BAUZ paper according to the run of the text. Deliberately, one has renounced a comment in such cases where the reproaches slip in the political or ideological field. The object of the BAUZ review as well as of the GRS critique is the matter to be investigated, aim and methods of the investigations and the results of the German Risk Study. The revision of the review acknowledges that in some cases the tendency of criticism is justified. Often, however, the critique is only a sharpened repetition of what the GRS itself has identified as restrictions of accuracy and inherent significance of the results. In most items, however, the critique is rejected as to be wrong or not proof. (orig./HP) [de

  14. Ageing management of mechanical components; Alterungsmanagement fuer mechanische Komponenten

    Energy Technology Data Exchange (ETDEWEB)

    Hienstorfer, W. [TUeV Energie- und Systemtechnik GmbH, Filderstadt (Germany); Herter, K.H.; Schuler, X. [Materialpruefungsanstalt, Univ. Stuttgart, Stuttgart (Germany)

    2004-07-01

    Lifetime management, ageing management and integrity testing are part of technical rules and specifications. The contribution focuses on ageing management, for which different technical measures are required depending on the safety relevance of the components and systems involved. The procedure for ensuring adherence to the specified quality is outlined, and the required technical and organisational measures are explained. (orig.) [German] In Leitlinien und Regelwerken sind fuer mechanische Komponenten Anforderungen zur Absicherung des Betriebs waehrend der gesamten Lebensdauer (Lebensdauermanagement), zur Absicherung von Alterungsphaenomenen (Alterungsmanagement) als auch zum Nachweis der Integritaet (Integritaetsnachweis, z.B. mit dem Ziel des Bruchausschlusses) enthalten. Ein wesentliches Element stellt dabei das Alterungsmanagement dar. Je nach sicherheitstechnischer Bedeutung der zu betrachtenden Komponenten und Systeme oder auch aus Gruenden der vorbeugenden Instandhaltung sind unterschiedliche technische Massnahmen erforderlich. Die Vorgehensweise zur Absicherung der im Betrieb geforderten Qualitaet wird aufgezeigt und die dabei erforderlichen technischen und organisatorischen Massnahmen werden erlaeutert. (orig.)

  15. Target values for indoor air quality. Judging indoor air quality by means of aggregate volatile organic compounds (TVOC value); Richtwerte fuer die Innenraumluft. Die Beurteilung der Innenraumluftqualitaet mit Hilfe der Summe der fluechtigen organischen Verbindungen (TVOC-Wert)

    Energy Technology Data Exchange (ETDEWEB)

    Seifert, B. [Umweltbundesamt Berlin (Germany). Inst. fuer Wasser-, Boden- und Lufthygiene

    1999-03-01

    The article discusses the existing bases for the derivation and use of assessment criteria for TVOC concentrations. For enhanced understanding, some aspects of VOC analytics are dealt with beforehand. (orig./MG) [Deutsch] Im vorliegenden Artikel werden die vorhandenen Grundlagen fuer die Ableitung und Verwendung von Bewertungskriterien fuer TVOC-Konzentrationen diskutiert. Zum besseren Verstaendnis werden einleitend einige Aspekte der VOC-Analytik eroertert. (orig/MG)

  16. Textbook with exercises on automation and process control. An introduction for engineers, industrial engineers and experts in business economics; Lehr- und Uebungsbuch Automatisierungs- und Prozessleittechnik. Eine Einfuehrung fuer Ingenieure, Wirtschaftsingenieure und Betriebswirtschaftler

    Energy Technology Data Exchange (ETDEWEB)

    Bergmann, J. [Hochschule fuer Technik, Wirtschaft und Sozialwesen Zittau/Goerlitz (FH), Zittau (Germany)

    1999-07-01

    This textbook addresses students at university level. It contains many examples and exercises and presents a detailed explanation of modelling in automation engineering, including equations and algorithms. Important problems of automation and their solutions are illustrated by an exemplary process control problem that recurs in the book and can be recalculated on the reader's PC. A CD-ROM is enclosed with a process automation system that can be analyzed and tested in several variants. [German] Dieses Lehr- und Uebungsbuch zur Automatisierungs- und Prozessleittechnik - eignet sich fuer die Ausbildung an Technischen Hochschulen, Fachhochschulen und Berufsakademien - ist fuer Studenten mit Automatisierungs- und Prozessleittechnik im Nebenfach konzipiert - enthaelt eine fuer das Grundverstaendnis notwendige, mit vielen Beispielen und Uebungen ergaenzte Lehrstoffauswahl - erlaeutert sehr verstaendlich die spezielle Modellwelt der Automatisierungstechnik mit ihren Beschreibungsformen und Loesungsalgorithmen - behandelt wesentliche Problemstellungen der Automatisierung und deren Loesungen anhand einer durchgaengigen, am Rechner nachvollziehbaren Prozessleitaufgabe. Das auf der beigefuegten CD-ROM visualisierte Prozessautomatisierungssystem kann in Variationen analysiert und getestet werden. (orig.)

  17. Fundamentals of heuristic approach to the selection of adsorption liquids for hydrocarbons; Grundlagen einer Heuristik zur Auswahl von Absorptionsfluessigkeiten fuer Kohlenwasserstoffe

    Energy Technology Data Exchange (ETDEWEB)

    Weisweiler, W. [Karlsruhe Univ. (T.H.) (Germany). Inst. fuer Chemische Technik; Winterbauer, H. [Karlsruhe Univ. (T.H.) (Germany). Inst. fuer Chemische Technik

    1995-11-01

    The present paper describes a possible way of finding the most appropriate absorbent for a given air pollutant or air pollutant mixture. (orig./SR) [Deutsch] Die vorliegende Arbeit beschreibt eine Moeglichkeit mit der fuer verschiedene organische Luftschadstoffe und Schadstoffgemische die geeignetsten Absorptionsmittel gefunden werden koennen. (orig./SR)

  18. The driver in the 21st century. Demands, applications, aspects of man-machine systems. Lectures; Der Fahrer im 21. Jahrhundert. Anforderungen, Anwendungen, Aspekte fuer Mensch-Maschine-Systeme. Plenarvortraege

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    A high grade of mobility is the basis of our economic development. The innovations in the automotive- and deliver industry lead to different fulfillments of customer expectations on vehicle operation. Also in the railway sector increasing requirements on the operators involve a change of view within design of man-machine interfaces. The transmission of information and transfer of reactions require advanced and balanced concepts for operating and monitoring of modern automobiles. The integral connection of competence in technology, design and ergonomics, sense- and traffic psychology as well as legal problems lead to new challenges and possibilities. (GL) [German] Der Fahrer im 21. Jahrhundert - Anforderungen, Anwendungen, Aspekte fuer Mensch-Maschine-Systeme - unter diesem Motto wird die interessante Fachtagung ''Der Fahrer im 21. Jahrhundert'' fortgefuehrt. Ein hohes Mass an Mobilitaet ist Grundlage unserer wirtschaftlichen Entwicklung. Die Innovationen in der Automobil- und Zuliefererindustrie fuehren zu einer differenzierten Erfuellung der Kundenerwartungen an die Bedienung der Fahrzeuge. Auch im Bereich Bahn bedingen die steigenden Anforderungen an die Fahrzeugfuehrer ein Umdenken bei der Gestaltung der Mensch-Maschine-Schnittstelle. Die Vermittlung von Informationen und die Umsetzung adaequater Reaktionen erfordern neue und ausgewogene Konzepte fuer das Bedienen und Beobachten moderner Fahrzeuge. Die integrale Verbindung von Kompetenz in Technologie, Design und Ergonomie, Wahrnehmungs- und Verkehrspsychologie sowie rechtlichen Fragestellungen fuehren hier zu neuen Herausforderungen und Moeglichkeiten. Die Tagung moechte wieder visionaere Loesungsansaetze aufzeigen und auch das Machbare diskutieren. Nutzen Sie die Gelegenheit, mit namhaften Referenten aus Industrie und Wissenschaft, Fach- und Fuehrungskraeften zu sprechen und auf dieser Veranstaltung neue Bedien- und Informationskonzepte, Teilloesungen fuer die unterschiedlichen Fahraufgaben

  19. Improved GaSb surfaces using a (NH{sub 4}){sub 2}S/(NH{sub 4}){sub 2}S0{sub 4} solution

    Energy Technology Data Exchange (ETDEWEB)

    Murape, D.M., E-mail: Davison.Murape@live.nmmu.ac.za [Department of Physics, Nelson Mandela Metropolitan University, PO Box 77000, Port Elizabeth 6031 (South Africa); Eassa, N.; Nyamhere, C.; Neethling, J.H. [Department of Physics, Nelson Mandela Metropolitan University, PO Box 77000, Port Elizabeth 6031 (South Africa); Betz, R. [Department of Chemistry, Nelson Mandela Metropolitan University, PO Box 77000, Port Elizabeth 6031 (South Africa); Coetsee, E.; Swart, H.C. [Department of Physics, University of the Free State, PO Box 339, Bloemfontein 9300 (South Africa); Botha, J.R.; Venter, A. [Department of Physics, Nelson Mandela Metropolitan University, PO Box 77000, Port Elizabeth 6031 (South Africa)

    2012-05-15

    Bulk (1 0 0) n-GaSb surfaces have been treated with a sulphur based solution ((NH{sub 4}){sub 2}S/(NH{sub 4}){sub 2}SO{sub 4}) to which sulphur has been added, not previously reported for the passivation of GaSb surfaces. Au/n-GaSb Schottky barrier diodes (SBDs) fabricated on the treated material show significant improvement compared to that of the similar SBDs on the as-received material as evidenced by the lower ideality factor (n), higher barrier height ({phi}{sub b}) and lower contact resistance obtained. Additionally, the reverse leakage current, although not saturating, has been reduced by almost an order of magnitude at -0.2 V. The sample surfaces were studied by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The native oxide, Sb-O, present on the as-received material is effectively removed on treating with ([(NH{sub 4}){sub 2}S/(NH{sub 4}){sub 2}SO{sub 4}]+S) and (NH{sub 4}){sub 2}S. Analysis of the as-received surface by XPS, prior to and after argon sputtering, suggests that the native oxide layer is {<=}8.5 nm.

  20. Parameters for viable process combinations; Randbedingungen fuer sinnvolle Verfahrenskombinationen

    Energy Technology Data Exchange (ETDEWEB)

    Lahl, U.; Zeschmar-Lahl, B. [BZL Kommunikation und Projektsteuerung GmbH, Oyten (Germany)

    1998-09-01

    The following parameters merit examination in determining the viability of process combinations: conceptual and technical soundness, environmental acceptability, energy balance, flexibility, costs, economic risk potential. The present contribution on this subject is not intended to take the place of or cover the scope of single-case studies. In practice, viability studies on process combinations have to deal with concrete plans involving precisely defined material flow balances, emissions, costs etc. The present paper therefore only presents the basic principles of this type of study. [Deutsch] Folgende Randbedingungen fuer sinnvolle Verfahrenskombinationen sind zu untersuchen: - konzeptionelle und technische Stimmigkeit, - Umweltvertraeglichkeit, - energetische Bilanz, - Flexibilitaet, - Kosten, - oekonomisches Risikopotential. Nun kann dieser Beitrag zum Thema keine Einzelfallbetrachtung ersetzen bzw. abdecken. Im Rahmen einer echten Pruefung auf `Sinnhaftigkeit` einer Kombinationsloesung stehen sich ganz konkrete Planungen gegenueber, die wiederum mit definierten Stoffflussbilanzen, Emissionen, Kosten usw. verbunden sind. Im Rahmen dieser Betrachtung koennen nur die Grundzuege einer derartigen Pruefung dargestellt werden. (orig.)

  1. Technology development for crystalline silicon thin-film solar cells (TEKSI). Final report; Technologieentwicklung fuer kristalline Silizium-Duennschicht-Solarzellen (TEKSI). Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Wettling, W.; Hurrle, A.; Bau, S.; Eyer, A.; Haas, F.; Huljic, D.; Kieliba, T.; Lautenschlager, H.; Luedemann, R.; Lutz, F.; Preu, R.; Reber, S.; Rentsch, J.; Schaefer, S.; Schetter, C.; Schillinger, N.; Warta, W.; Zimmermann, W.

    2002-10-01

    The results of a project aimed at the development of crystalline solar wafers are presented. All process stages were reviewed in detail with a view to industrial fabrication. This included also the further development of machinery, e.g. for selective zone melting recrystallisation, CVD silicon deposition, and characterisation of deposited films and solar cells. Not all the envisaged goals were achieved. For example, efficiencies up to 17.6 percent were possible on direct epitactic, highly doped CZ-Si substrates and with a high-efficiency process, but the normal efficiencies of solar cells on SSP or on ceramic substrates were in the range of 8-11 percent. This underlines the need for further research on the development of appropriate substrates with reproducible properties. [German] Im vorliegenden Bericht werden die Ergebnisse eines mehrjaehrigen Projekts zur Entwicklung der kristallinen Silizium-Duennschichtsolarzelle (KSD-Solarzelle) vorgestellt. Die Arbeiten waren eine konsequente Fortsetzung der bereits in einem Vorgaengerprojekt (FKZ 0328986B) bearbeiteten Themen. Alle zur Herstellung solcher Solarzellen noetigen Prozessschritte im Rahmen des am Fraunhofer ISE verfolgten Hochtemperaturpfads wurden detailliert untersucht, insbesondere im Hinblick auf eine industrielle Fertigung. Ein wesentlicher Teil der Arbeiten befasste sich deshalb auch mit der Weiterentwicklung von Geraeten, so z. B. fuer die Zonenschmelzrekristallisation, fuer die Silizumabscheidung mittels CVD-Verfahren und fuer die Charakterisierung abgeschiedener Schichten und Solarzellen. Nicht alle der ehrgeizigen Projektziele konnten erreicht werden. Auf direkt epitaxierten, hochdotierten CZ-Si-Substraten konnten zwar mit einem High-Efficiency-Prozess Wirkungsgrade bis zu 17.6%, mit fertigungsrelevanter Siebdrucktechnologie bis 13% erzielt werden. Die Wirkungsgrade von Solarzellen auf SSP oder auf Keramiksubstraten lagen aber alle im Bereich von 8-11%. Dies zeigt deutlich, dass die Entwicklung

  2. PEM fuel cells for mobile applications. Project part: Membrane development. Final report; PEM-Brennstoffzellen fuer mobile Anwendungen. Teilprojekt: Membranentwicklung. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Frank, G

    1999-01-20

    Polymer-Electrolyte-Membrane Fuel Cells (PEMFC) are attractive candidates for next century propulsion systems in passenger cars. The technical feasibility has been demonstrated by several car manufacturers. Today, PEMFC lack economical viability. One of the reasons is the cost of currently used materials, e.g. membranes. This project target towards the development of low cost, non-fluorinated membranes, which fulfil all technical requirements in PEMFC systems. In the frame of this project we were able to successfully develop new membranes based on polyaromatic polymers, which can be produced on a technical scale. These membranes enabled high power densities, exceeding 700 mW/cm{sup 2} at 80 C and their longevity has been demonstrated successfully up to 5,000 hours. Therefore, these membranes have sufficient electrochemical stability for the application in fuel cells. The prices in mass production for these new membranes can get significantly below prices of fluorinated membranes. (orig.) [Deutsch] Polymer-Elektrolyt-Membran-Brennstoffzellen (PEMFC) gelten als aussichtsreiche Kandidaten fuer alternative Fahrzeugantriebe fuer das naechste Jahrzehnt. Die technische Machbarkeit ist bereits mehrfach demonstriert worden. Allerdings sind die Kosten der PEMFC-Systeme noch zu hoch u.a. durch zu hohe Kosten der eingesetzten Materialien, so auch der Membranen. Ziel des Projektes war daher die Entwicklung kostenguenstiger, nichtfluorierter Membranen, die die technischen Anforderungen fuer die Anwendung in der PEM-Brennstoffzelle erfuellen. Im Projekt konnten erfolgreich Membranen auf Basis polyaromatischer Polymere entwickelt werden, die sich auch im technischen Massstab herstellen lassen. Die Membranen ermoeglichen hohe Leistungsdichten groesser 700 mW/cm{sup 2} bei Betriebstemperaturen von 80 C. Die Lebensdauer der Membranen wurde erfolgreich ueber 5.000 Stunden nachgewiesen. Die elektrochemische Stabilitaet der untersuchten Materialien ist damit gegeben. Die Preise dieser

  3. PEM-fuel cells for mobile application. Sub task: development of electrocatalysts. Final report; PEM-Brennstoffzelle fuer mobile Anwendung. Teilprojekt: Katalysatorenentwicklung. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Starz, K A

    1999-01-01

    PEM fuel cells are gaining increasing importance for use in automotive application. The goal of the research program reported here was to develop the basic technology and components for PEMFC stacks for use in transport applications. The sub-task of Degussa was to develop improved electrocatalysts for PEMFC single cells and stacks. The technical objectives of the research project were met. Electrocatalysts, characterized by a high Pt-dispersion, high surface area and excellent activity, were developed. With this material, considerable progress was made to reduce the total platinum loading of PEMFC cells and stacks to about 0,5 mgPt/cm{sup 2}. With this value, the goal of the program (<0,8 mg/cm{sup 2}) was significantly surpassed. Additionally, higher power densities of >0.4 W/cm{sup 2} were achieved at Degussa for hydrogen/air and reformate/air operation of the PEMFC. A CO-tolerant anode electrocatalyst, exhibiting a CO-tolerance of up to 100 ppm CO, enables the operation of PEMFC stacks with on-board generated methanol reformate. The performance of the new electrocatalyst materials was verified by DaimlerChrysler in a PEMFC demonstration stack at the end of the program. (orig.) [Deutsch] PEM-Brennstoffzellen gewinnen fuer die mobile Anwendung immer mehr an Bedeutung. Im Rahmen des hier beschriebenen Leitprojektes sollten die Basistechnologien fuer den Einsatz der PEM-Brennstoffzelle im mobilen Bereich (Elektrotraktion) entwickelt werden. Das Teilprojekt der Degussa befasst sich mit der Entwicklung von verbesserten Elektrokatalysatoren fuer PEM-Brennstoffzellenstacks. Die technischen Arbeitsziele des Vorhabens wurden erreicht. So konnten Elektrokatalysatoren bereitgestellt werden, die sich durch eine hohe Pt-Dispersion, eine grosse Pt-Oberflaeche sowie eine sehr gute Aktivitaet auszeichnen. Mit diesen Elektrokatalysatoren gelang es, die Platinbeladung der PEM-Elektroden (Anode und Kathode) erheblich abzusenken. Mit einer Gesamtplatinbeladung von 0,5 mg/cm{sup 2

  4. Comparison between airborne pollution measurement and calculation at 14 measuring points in the Federal State of Brandenburg; Vergleich Immissionsmessung - Immissionsberechnung fuer 14 verkehrsnahe Messpunkte im Land Brandenburg

    Energy Technology Data Exchange (ETDEWEB)

    Friedrich, U. [Landesumweltamt Brandenburg, Potsdam (Germany). Abt. Immissionsschutz; Schierbaum, I. [Landesumweltamt Brandenburg, Potsdam (Germany). Abt. Immissionsschutz

    1997-02-01

    Airborne pollution measurements for the pollutants benzene and soot were carried out at 14 inner-city measuring points, close to traffic, in the Federal State of Brandenburg, using a distribution model for ideal build-up streets (CPB model) and a model assuming missing fringe buildings (Gauss model). The calculated annual mean values were compared with the measured annual mean values. Benzene: The annual mean values calculated with the help of the CPB model diverged from the measured annual mean values by {+-}25%, apart from one exception. Soot: The calculated annual mean values were always lower than the measured annual mean values. Emission-sources not considered in the calculation (tyre abrasion, secondary dust) are assumed to be the main cause for this difference. (orig.) [Deutsch] Es wurden an 14 innerstaedtischen verkehrsnahen Messpunkten im Land Brandenburg mit einem Ausbreitungsmodell fuer ideale Strassenschluchten (CPB-Modell) und einem Modell unter der Annahme fehlender Randbebauung (Gauss-Modell) Immissionsberechnungen fuer die Schadstoffe Benzol und Russ durchgefuehrt. Benzol: Die mittels CPB-Modell berechneten Jahresmittelwerte wichen bis auf eine Ausnahme maximal um {+-}25% von den Jahresmitteln der Messergebnisse ab. Russ: Die berechneten Jahremittel wiesen stets geringere Werte als die Jahresmittelwerte der Messung auf. Als Hauptursache fuer diese Differenz werden Emissionsquellen vermutet, die nicht bei der Berechnung beruecksichtigt wurden (Reifenabrieb, Sekundaerstaub). (orig.)

  5. Status and perspectives of waste product utilisation in the T2C plant at Hoechst; Stand und Perspektiven in der EBS-Verwertung in der T2C-Anlage Hoechst

    Energy Technology Data Exchange (ETDEWEB)

    Lorbach, Dirk [Infraserv GmbH und Co. Hoechst KG, Frankfurt am Main (Germany). Geschaeftsfeld Energien

    2012-11-01

    The plant concept is based on combustion of a multitude of substitute fuels. According to the substitute fuel specifications for general entrepreneur EBARA, comminution of waste materials in a slow shredder should be sufficient, and experience so far has shown that this is indeed the case. The plant was commissioned in 2011, and the envisaged performance parameters were achieved after some initial difficulties, i.e. the envisaged volumes of waste could be combusted. The efficiency of heat generation was below expectations, however, as the integrated heat exchangers did not run at full capacity. Reconstruction of the plant is now planned with a view to optimizing the energy yield. It is expected that the energy efficiency goals will be reached in 2013. Modernisation will comprise retrofitting of a flue gas circulation system for better temperature control in the fluidized bed and for optimum energy yield. All other plant components - off-gas filters, water/steam cycle and turbine - work satisfactorily according to the planned parameters. (orig.) [German] Das Konzept der Anlage basiert auf der thermischen Verwertung einer Vielzahl von Ersatzbrennstoffen. Entsprechend der EBS-Spezifikation fuer den Generalunternehmer EBARA sollte fuer eine ausreichende Stueckgroesse eine Zerkleinerung der Abfaelle mit einem langsam laufenden Shredder ausreichen. In der bisherigen Inbetriebnahme hat sich gezeigt, dass dies grundsaetzlich von der Anlagentechnik, bis auf eine Einschraenkung, auch erreicht wird. Die Inbetriebnahme der Anlage wurde 2011 fuer den Dauerbetrieb abgeschlossen. Nach anfaenglichen Schwierigkeiten hat die Firma EBARA die vertraglichen Leistungsparameter im Bereich der Verbrennung erreicht. Die vorgesehenen EBS-Mengen koennen verbrannt werden. Bisher is allerdings die Waermeausbeute hinter den Erwartungen zurueckgeblieben, da die Einbauten in der Wirbelschicht, das sind integrierte Waermetauscher (HRC's), bisher ihre vollstaendige Leistung nicht erbracht

  6. Single room control for user-optimised room air conditions; Einzelraumregelung fuer nutzungsoptimiertes Raumklima

    Energy Technology Data Exchange (ETDEWEB)

    Lezius, A. [Staefa Control System GmbH, Leinfelden-Echterdingen (Germany)

    1995-12-31

    In chapter 14 of the anthology about building control the single room control for achieving user-optimised room air conditions is described. The following aspects are discussed: What is comfort? What is economic efficiency? Systems for secondary air treatment, adapted functions of the measurement and control technique, management functions, orientation of the demand at the use, investment and amortisation. (BWI) [Deutsch] Kapitel 14 des Sammelbandes ueber Building control ist dem Thema der Einzelraumregelung zur Erzielung eines nutzungsoptimierten Raumklimas gewidmet. In diesem Zusammenhang werden folgende Themenbereiche angesprochen: Was ist Komfort? Was ist Wirtschaftlichkeit? Systeme fuer sekundaere Luftbehandlung; Angepasste Funktionen der MSR-Technik; Managementfunktionen; Bedarfsorientierung an der Nutzung; Investition und Amortisation. (BWI)

  7. Modern recording systems for services able to meet the competition; Moderne Erfassungssysteme fuer wettbewerbsfaehige Dienstleistungen

    Energy Technology Data Exchange (ETDEWEB)

    Drumm, M.

    2000-07-01

    Modern recording systems form the basis for competitive services. They are, however, only successful when integrated precisely into a lean running organization. By means of practical examples the necessity to place great emphasis on the costs of a system besides the investment costs when deciding about a recording system, will be examined. The significant changes on the energy market and the increasing demand of the housing economy for a comprehensive offer of services from the supply industry are main initiators for a whole new line of businesses on the supply economy sector. The great challenge for the supply industry lies in the task to install lean and effective system which are on one hand reliable and easy to handle for the whole duration of the contract and on the other hand are so cost efficient, that an adequate profitability can be ensured (see also: 'The secret winners', Zfk October 1999). A decisive factor for this reason is the metering technology, which has to ensure for the whole duration of the contract that correct consumption values are registered, on the basis of which as fast and punctual as possible a legally safe invoicing can be prepared. (orig.) [German] Moderne Erfassungssysteme bilden die Grundlage fuer wettbewerbsfaehige Dienstleistungen, die jedoch erst bei sauberer Einbindung in eine schlanke Ablauforganisation erfolgreich sind. Anhand von Praxisbeispielen wird die Notwendigkeit betrachtet, bei der Entscheidung fuer ein Erfassungssystem neben den Investitionskosten den Systemkosten entscheidendes Gewicht zu verleihen. (orig.)

  8. New energy conversion processes and neglected auxiliary systems - a treasure trove for energy service providers; Neue Techniken und vernachlaessigte Nebenanlagen - eine Fundgrube fuer Energiedienstleister

    Energy Technology Data Exchange (ETDEWEB)

    Jochem, E.

    1998-12-31

    The paper shows that apart from the risks, the deregulation of the energy sector also offered new chances, which recently materialized in three emerging independent trends, initiating innovative approaches for energy conversion and applications and demand for new knowledge-based, near-production energy services as a new field for engineers: Providers of energy efficiency-related technology widen their capabilities by adding the new business segment of energy service marketing. Industrial energy users more strongly consider outsourcing of energy conversion systems and the relevant contracting schemes as an option for reducing energy costs. Public enterprise as energy users started following this trend, all the more as insufficient financial resources do not permit them to reinvest. The paper discusses the conversion processes which currently open up promising chances for energy service producers. (orig./CB) [Deutsch] Neben Gefahren, die inhaerentes Merkmal der Liberalisierung sind, zeichnen sich drei unabhaengige Entwicklungen ab, die innovative Initiativen in der Energiewandlung und -nutzung staerken und wissensintensive produktionsnahe Dienstleistungen als zentrale Aufgabe fuer den Ingenieur initieren: - Die Energieeffizienz-Technologieanbieter nehmen die Energiedienstleistungen in ihre Angebotspalette auf. - Die betrieblichen Energieanwender beginnen zunehmend, ueber das Outsourcing energiewandelnder Anlagen Energiekosten zu senken. - Die oeffentliche Hand als Energieanwender beginnt aehnlich zu denken, zumal sie infolge der hohen Verschuldung unzureichende finanzielle Mittel fuer Reinvestitionen hat. Hierueber sei kurz berichtet, bevor auf die Techniken eingegangen wird, die sich besonders aus heutiger Sicht fuer Energiedienstleister eignen. (orig./RHM)

  9. Integrated information system MBS as a basis for fuel management in conventional power stations; Integriertes Informationssystem MBS als Basis fuer das Brennstoffmanagement in konventionellen Kraftwerken

    Energy Technology Data Exchange (ETDEWEB)

    Sasko, P.; Lindemann, H.; Kern, H.

    2000-07-01

    The fuel cost is a key factor in fossil-fuel power stations, and optimisation of fuel use is an urgent task. Modul Brennstoffe MBS supports all processes relevant for fuel supply and waste management, i.e. projecting, acquisition, optimisation of operation, billing, and evaluation. [German] Die gegenwaertige Situation in der Energiewirtschaft und im liberalisierten Energiemarkt hat zu einem nachhaltigen Kostendruck auf der Seite der Erzeugung gefuehrt. Die Brennstoffkosten in den fossil befeuerten Kraftwerken stellen eine wesentliche Komponente der Erzeugungskosten dar. Vor diesem Hintergrund hat die Optimierung des Brennstoffeinsatzes eine grundsaetzliche Bedeutung gewonnen. Modul Brennstoffe MBS unterstuetzt alle fuer die Brennstoffversorgung und fuer die Entsorgung von konventionellen Kraftwerken relevanten Geschaeftsprozesse. Es umfasst die Geschaeftsvorgaenge Planung, Beschaffung, Einsatzoptimierung, Abrechnung und Auswertung. Die Geschaeftsprozesse sind informationstechnisch im Modul Brennstoffe in einem integrierten System abgebildet. (orig.)

  10. Gaining Insight into an Organization's Fixed Assets.

    Science.gov (United States)

    Hardy, Elisabet

    2003-01-01

    Discusses issues related to school district implementation of June 2001 Government Accounting Standards Board (GASB) Statement 34 designed to change how schools report fixed assets. Includes planning for GASB implementation, conducting fixed-asset inventories, and making time for GASB reporting. (PKP)

  11. KS R41B. A high performance steel-aluminium composite material; KS R41B. Ein Stahl-Aluminium-Verbundwerkstoff fuer hohe Belastungen

    Energy Technology Data Exchange (ETDEWEB)

    Deicke, K. [KS Gleitlager GmbH (Germany). Bereich Metall; Matucha, H.; Schubert, W. [KS Gleitlager GmbH, St. Leon-Rot (Germany); Steffens, T. [KS Gleitlager GmbH, Neckarsulm (Germany)

    2002-08-01

    Aluminium-tin alloys have been well-known for a long time and have proved to be suitable bearing materials for crankshaft bearings for many years. The known alloy AlZn4,5SiCuPb is one of the aluminium materials capable of sustaining the highest mechanical loads. In order to achieve optimum sliding properties, it would be necessary to increase the share of the soft lead phase in the alloy. This article by KS Gleitlager GmbH shows a reasonably priced manufacturing technology for high-performance aluminium-zinc-silicon-copper alloys. (orig.) [German] Die Aluminium-Zinn-Lagerlegierungen sind seit langem bekannt und haben sich seit Jahren als Lagerwerkstoff fuer Kurbelwellenlager bewaehrt. Die Legierung AlZn4,5SiCuPb gehoert zu den mechanisch am hoechsten belastbaren Aluminium-Werkstoffen. Um optimale Gleiteigenschaften zu erzielen, muesste in der Legierung der Anteil des weichen Bleis noch weiter erhoeht werden. Dieser Beitrag der KS Gleitlager GmbH zeigt eine kostenguenstige Herstelltechnologie fuer hochbelastbare Aluminium-Zink-Silizium-Kupfer-Legierungen. (orig.)

  12. Zero-leakage shut-off butterflies for high-temperature applications; Dichtschliessende Absperrklappen fuer die Hochtemperaturtechnik

    Energy Technology Data Exchange (ETDEWEB)

    Meier, N. [Krombach Armaturen, Kreuztal (Germany)

    2000-03-01

    Over many years, zero-leakage butterfly valves have eminently proven their capabilities in a large range of elevated-temperature and elevated-pressure processes. This article examines the basic design differences between various butterfly valves. These differences are, among other factors, important indicators of the suitability of the various valve types for their use in industry. (orig.) [German] Dichtschliessende Absperrklappen haben sich ueber Jahre in vielen Prozessen, die unter hoeherem Druck und hoeherer Temperatur ablaufen, bestens bewaehrt. Der Beitrag zeigt die grundsaetzlichen konstruktiven Unterschiede dichtschliessender Absperrklappen. Diese Unterschiede sind unter anderem Indikatoren fuer die Prozesstauglichkeit von Absperrklappen in der Industrie. (orig.)

  13. Interpretation of ozone vertical profiles and their variations in the Northern hemisphere on the basis of GOME satellite data. Final report; Interpretation von Ozon-Vertikalprofilen und deren Variationen in der noerdlichen Hemisphaere unter Benutzung von GOME Satellitendaten. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Eichmann, K.U.; Bramstedt, K.; Weber, M.; Rozanov, V.; Debeek, R.; Hoogen, R.; Burrows, J.P.

    2000-07-04

    Semiglobal ozone vertical profiles based on GOME measurements were established and evaluated systematically. GOME (Global Ozone Monitoring Experiment), carried by the ERS-2 satellite, is the first European passive optical sensor for long-term monitoring of ozone, other trace elements, and aerosols. Especially the vertical distribution of ozone in the Arctic region was measured and interpreted with a view to enhanced ozone degradation in the Arctic winter and spring seasons. Apart from the regional variations, also the time variations of the profiles are to provide further information on the dynamics and chemical processes in the polar vortex. The retrieval algorithm used for assessing the ozone vertical profiles, FURM (FUll Retrieval Method), is based on the GOMETRAN radiation transport model developed at Bremen university especially for evaluation of the GOME data. The GOME ozone profiles were validated with ozone probes and other satellite experiments. [German] Ziel des Projektes war eine systematische Bestimmung und Auswertung von semiglobalen Ozonvertikalprofilen aus den Messdaten von GOME. Das auf dem Satelliten ERS-2 fliegende Spektrometer GOME (Global Ozone Monitoring Experiment) ist der erste europaeische, passive, optische Sensor, der fuer Langzeitmessungen von Ozon, anderen Spurenstoffen und Aerosolen konzipiert wurde. Im Projekt wurde insbesondere die vertikale Verteilung von Ozon in der Arktis bestimmt und interpretiert hinsichtlich des verstaerkten Ozonabbaus im arktischen Winter und Fruehjahr. Neben der raeumlichen Variation sollen auch die zeitlichen Ablaeufe und Veraenderungen der Profile weitere Erkenntnise hinsichtlich der Dynamik und der chemischen Prozesse im Polarwirbel liefern. Der Retrievalalgorithmus zur Bestimmung des Ozonhoehenprofils, FURM (Full Retrieval Method) genannt, basiert auf dem Strahlungstransportmodell GOMETRAN, das an der Universitaet Bremen speziell fuer die Auswertung der Daten des GOME Instrumentes entwickelt wurde

  14. Development and application of a new tool in driver task analysis; Entwicklung und Anwendung einer neuen Methodik zur Fahreraufgabenanalyse

    Energy Technology Data Exchange (ETDEWEB)

    Fastenmeier, W.; Gstalter, H. [mensch-verkehr-umwelt Institut fuer Angewandte Psychologie, Muenchen (Germany)

    2003-07-01

    A framework for driver task analysis is derived from a model of the drivers information processing. The first step of the procedure (SAFE) is to divide a given driving task (e.g. left turning in a signalised intersection of a certain type) into subtasks. These subtasks are appointed to defined stretches of the road and the time structure of the subtasks is determined. For each subtask an analysis format is used, that organizes different requirements into perception, expectation, judgement, memory, decision and driver action. In a next step, typical driver errors are appointed to the subtasks. Afterwards the information gathered in the analysis procedure is compressed to ratings of the complexity and risk included in each subtask. After the crucial subtasks of a driving task have been determined, a list of those requirements that led to that rating can be compiled. These lists give the potential for aiding the driver e.g. by use of driver assistance systems. (orig.) [German] In den Verkehrswissenschaften existieren bislang keine verkehrsspezifischen Standardverfahren, die eine Anforderungsanalyse auf der Ebene der Fahraufgaben erlauben. Dieser Beitrag stellt die Grundzuege eines Verfahrens zur Fahraufgabenanalyse dar (SAFE: Situative Anforderungsanalyse von Fahraufgaben). Es basiert auf einer Modellvorstellung zu den Informationsverarbeitungsprozessen, die waehrend der Bewaeltigung der Fahraufgabe eine Rolle spielen. Der erste Schritt der Aufgabenanalyse besteht darin, eine ausgewaehlte Fahraufgabe (z.B. Linksabbiegen in einer ampelgeregelten Kreuzung bestimmten Typs) in Teilaufgaben zu zerlegen und eine zeitliche Strukturierung dieser Teilaufgaben vorzunehmen. Diese werden raeumlichen Segmenten zugeordnet, die nacheinander durchfahren werden muessen. Fuer jede Teilaufgabe erfolgt dann die eigentliche Anforderungsanalyse, die nach den Kapiteln Wahrnehmung, Erwartungsbildung, Beurteilung, Gedaechtnisprozesse, Entscheidung/Planung sowie Fahrzeugbedienung mit jeweils

  15. Five years of proton therapy of tumours of the eye at Hahn-Meitner Institute, Berlin; Fuenf Jahre Protonentherapie von Augentumoren am Hahn-Meitner-Institut Berlin

    Energy Technology Data Exchange (ETDEWEB)

    Heufelder, J.; Cordini, D.; Heese, J.; Homeyer, H.; Kluge, H.; Morgenstern, H. [Hahn-Meitner-Inst. Berlin, Augentumortherapie (Germany); Fuchs, H. [Hahn-Meitner-Inst. Berlin, Augentumortherapie (Germany); Augenklinik, Charite - Universitaetsmedizin Berlin, Campus Benjamin Franklin (Germany); Hoecht, S.; Nausner, M.; Hinkelbein, W. [Klinik fuer Radioonkologie und Strahlentherapie, Charite - Universitaetsmedizin Berlin, Campus Benjamin Franklin (Germany); Bechrakis, N.E.; Foerster, M.H. [Augenklinik, Charite - Universitaetsmedizin Berlin, Campus Benjamin Franklin (Germany)

    2004-07-01

    Eye tumors (choroidal melanomas, iris melanomas, and choroidal hemangiomas) are being treated with 68 MeV protons since 1998 at the Ion Beam Laboratory of the Hahn-Meitner Institute of Berlin (Germany's first proton therapy center), in cooperation with the Charite University Hospital in Berlin, Campus Benjamin Franklin. The proton beam, generated via a combination of Van de Graaff accelerator and cyclotron, is prepared by passive shaping for conformal tumor irradiation. A digital X-ray verification of the tumor location with the patient in sitting position limits the position uncertainties to a maximum of 0,3 mm. The treatment planning is performed using the program EYEPLAN. OCTOPUS, a CT-based planning program developed in cooperation with the German Cancer Research Center of Heidelberg, is under pre-clinical testing. Thus far, more than 400 patients have been irradiated. The first results are comparable to those obtained in other proton therapy centers. At the end of 2002, the University Hospital of Essen has also become a cooperation partner of the Hahn-Meitner Institute. (orig.) [German] Seit 1998 werden am Ionenstrahllabor des Hahn-Meitner-Instituts Berlin (Deutschlands erster Einrichtung zur Protonentherapie) im Rahmen eines Kooperationsvertrages mit der Charite - Universitaetsmedizin Berlin, Campus Benjamin Franklin, Augentumoren (Aderhautmelanome, Irismelanome und Aderhauthaemangiome) mit 68-MeV-Protonen bestrahlt. Der mittels einer Kombination aus Van de Graaff-Beschleuniger und Zyklotron erzeugte Protonenstrahl wird passiv fuer eine konformale Bestrahlung des Tumors aufbereitet. Eine digitale Roentgenkontrolle der Lagerung des sitzenden Patienten beschraenkt die Lagerungsunsicherheit auf maximal 0,3 mm. Fuer die Bestrahlungsplanung wird das modellbasierte Planungsprogramm EYEPLAN verwendet. In vorklinischer Erprobung befindet sich das mit dem Deutschen Krebsforschungszentrum Heidelberg entwickelte CT-basierte Planungsprogramm OCTOPUS. Bisher wurden

  16. Environmental protection by cost minimization: Least Cost Planning for traffic. Includes a guide for the application in local communities; Umweltentlastung durch Kostenminimierung: Least Cost Planning im Verkehr. Mit Leitfaden fuer die Anwendung in Kommunen

    Energy Technology Data Exchange (ETDEWEB)

    Bracher, T.; Diegmann, V.; Eckart, C.F.; Liwicki, M.; Lobenberg, G.; Wetzel, C. [Gesellschaft fuer Informatik, Verkehrs- und Umweltplanung mbH (IVU), Berlin (Germany); Bergmann, M.; Uricher, A.; Lueers, A. [Oeko-Institut, Inst. fuer Angewandte Oekologie e.V., Freiburg im Breisgau (Germany); Becker, U.; Karl, G.; Karl, B.; Voellings, A. [Technische Univ. Dresden (Germany). Lehrstuhl fuer Verkehrsoekologie

    1999-08-01

    An intermodal approach for the evaluation of transportation services on the municipal level was developed. Both non-motorised and motorised transportation were included. The approach aims at helping communities to provide an economically and ecologically viable transport policy. Least Cost Transportation Planning (LCTP) was developed to transfer the successful concept of Least Cost Planning from the energy sector to transportation. The conclusion from an analysis of LCTP literature and present evaluation methods was that an improved approach should be intermodal and integrate users, public bodies and transport companies as well as all planning sectors. An approach was developed firstly to identify and clarify transportation expenditures and incomes of a city within a year, and secondly for the evaluation of planning alternatives. This was illustrated for the access system of an industrial area with adjacent railway services in the town of Freiburg. Three alternatives were compared: the extension of a tramway line, the upgrading of the present bus system, and the development of a service and bicycle provision concept for rail stations and companies. Besides income and expenditure for each alternative, the effects on transport demand, the impact on air pollution and noise and on space consumption were presented. As a result, the bicycle concept is in most items better than its alternatives. The final report has three volumes and there is an extra guideline for implementing the method within municipalities. It includes a set of excel sheet tables for an easy application (all in German). (orig.) [German] Fuer die Verkehrsplanung wurde ein verkehrstraegeruebergreifendes Bewertungsverfahren fuer Kommunen entwickelt, das motorisierte und nicht motorisierte Verkehrstraeger einbezieht. Das Verfahren soll Gemeinden unterstuetzen, eine oekonomische und oekologisch vertraegliche Verkehrspolitik zu verfolgen. Least Cost Transportation Planning (LCTP) zielt darauf ab, das fuer

  17. Survey of legislation applicable in Germany for implementation of the EC Directive on environmental audits; Ueberblick ueber die in Deutschland fuer die Ausfuehrung der EG-Umwelt-Audit-Verordnung geltenden Rechtsvorschriften

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    The brochure presents a comprehensive survey of the relevant legislation applicable in Germany to implementation of the EC Directive on environmental auditing. Readers interested in performing such auditing at one glance will find in this compiulation all relevant laws and regulations in full text that are to be observed for implementation of this novel environmental auditing instrument. (orig./RHM) [Deutsch] Diese Broschuere vermittelt einen umfassenden Ueberblick ueber die in Deutschland fuer die Ausfuehrung der EG-Umwelt-Audit-Verordnung geltenden Rechtsvorschriften. Damit wird fuer alle Interessenten ein rascher Zugriff auf die Rechtstexte, die zur praktischen Anwendung des neuartigen Umwelt-Audit-Instruments notwendig sind, ermoeglicht. (orig./RHM)

  18. Infrared camera - specially developed for professional building inspection - with dew point detection tracing out fungi formation; Infrarotkamera - speziell entwickelt fuer die professionelle Gebaeudeinspektion - mit Taupunktermittlungsfunktion zum schnellen Auffinden von Gefahrbereichen fuer Schimmelbildung

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2004-07-01

    Besides the positive effect of energy saving the aspect of fungi formation has also to be respected. Fungi is not only responseable for health diseases but can also damage building materials. Examples are shown and how they can be detect by an infrared monitoring camera. (GL) [German] Die Waermeschutzverordnung und das daraus hervorgegangene Energieeinspargesetz haben weitreichende Folgen fuer Architekten, Bauingenieure, Instandhalter und Sanierer: Zeitgemaesse Gebaeude werden immer dichter, Luftzirkulation und damit der Feuchtigkeitsaustausch werden weitgehend unterbunden. Neben dem positiven Effekt der Energieersparnis ergibt sich dadurch leider oft auch ein Problem durch Schimmelbildung. Dabei ist zu bedenken, dass Schimmelpilz nicht nur gesundheitsgefaehrend ist, sondern oft auch die Bausubstanz signifikant schaedigen kann. (orig.)

  19. Chair of geotechnical processes at the Institute for geotechnics and mine surveying at Clausthal Technological University; Professur fuer Geotechnische Verfahren am Institut fuer Geotechnik und Marktscheidewesen der TU Clausthal

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, N. [Technische Univ. Clausthal, Institut fuer Geotechnik und Marktscheidewesen (Germany)

    2003-08-14

    The Chair of Geotechnical Processes at the Institute for Geotechnics and Mine Surveying at Clausthal Technological University is concerned primarily with practical fundamental research in addition to teaching, in which comprehensive theoretical and practical experience from all areas of geotechnics is imparted. (orig.) [German] Der Lehrstuhl Geotechnische Verfahren am Institut fuer Geotechnik und Markscheidewesen der TU Clausthal befasst sich neben der Lehre, in der umfangreiche theoretische und praktische Erfahrungen aus allen Bereichen der Geotechnik vermittelt werden, in erster Linie mit der praxisnahen Grundlagenforschung. Die bearbeiteten Problemstellungen liegen bei der Bauwerk-Baugrund-Interaktion, Stabilitaetsproblemen bei Unterwasserboeschungen, der Umweltgeotechnik, der Geomesstechnik und dem Einsatz von Geokunststoffen in der Geotechnik und dem Bergbau. Die Forschungsvorhaben werden in enger Kooperation mit der Industrie durchgefuehrt. (orig.)

  20. Product marketing for eco-power; Produktemarketing fuer Oekostrom

    Energy Technology Data Exchange (ETDEWEB)

    Huber, D. [Verband Schweizerischer Elektrizitaetswerke, Zuerich (Switzerland)

    1998-10-30

    The company NaturEnergie (natural energy), a subsidiary of the Energieversorger Kraftwerk Laufenburg AG (KWL) is located in Grenzach-Whylen (Germany) near Basel (Switzerland) has been selling power generated from sun and water since the 1st of October 1998. The company employes a cleverly designed, emotional marketing strategy in order to position the brand ``NaturEnergie`` as a label for ``green power`` on the market. Bulletin VSE talked to Dr. Kai-Hendrik Schlusche (40), co-founder and member of the board of NaturEnergie AG about marketing and pricing of ``green`` power and about relations with Switzerland.(orig.) [Deutsch] Im grenznahen Grenzach-Whylen bei Basel verkauft die Firma NaturEnergie, eine Tochtergesellschaft der Energieversorger Kraftwerk Laufenburg AG (KWL) und Kraftuebertragungswerke Rheinfelden AG (KWR), seit 1. Oktober 1998 Oekostrom aus Sonne und Wasser. Mit Hilfe einer ausgekluegelten emotionellen Marketingstrategie will das junge Unternehmen die Marke `NaturEnergie` als Label fuer `gruenen Strom` im Markt positionieren. Bulletin VSE sprach mit Dr. Kai-Hendrik Schlusche (40), seit Mai 1998 Gruendungsvorstand der NaturEnergie AG, ueber Marketing, Preisgestaltung von `gruenem Strom` und die Beziehungen zur Schweiz. (orig.)

  1. Market research and marketing for the mobility; Marktforschung und Marketing fuer die Mobilitaet

    Energy Technology Data Exchange (ETDEWEB)

    Meinig, W. [Bamberg Univ. (Germany)

    1994-12-31

    The explanations, which have been given in the talk are supposed to reveal, that the aim of the marketing for electric-powered vehicles is not to carry the idea of environmental protection into the society. It is far more important to use the power of the present environmental consciousness in order to guarantee the consumers demands for mobility, taking into consideration the ecological interests. (orig.) [Deutsch] Die vorstehenden Ausfuehrungen sollten insbesondere deutlich machen, dass das Ziel eines Marketing fuer E-Mobile nicht darin bestehen kann, den Umweltschutzgedanken in die Gesellschaft zu tragen. Vielmehr geht es darum, die Schubkraft vorhandenen Umweltbewusstseins dafuer zu nutzen, Mobilitaetsbeduerfnisse von Konsumenten unter Bewahrung oekologischer Interessen sicherzustellen. (orig.)

  2. Treatment for GaSb surfaces using a sulphur blended (NH4)2S/(NH4)2SO4 solution

    International Nuclear Information System (INIS)

    Murape, D.M.; Eassa, N.; Neethling, J.H.; Betz, R.; Coetsee, E.; Swart, H.C.; Botha, J.R.; Venter, A.

    2012-01-01

    A sulphur based chemical, [(NH 4 ) 2 S/(NH 4 ) 2 SO 4 ] to which S has been added, not previously reported for the treatment of (1 0 0) n-GaSb surfaces, is introduced and benchmarked against the commonly used passivants Na 2 S·9H 2 O and (NH 4 ) 2 S. The surfaces of the treated material were studied by scanning electron microscopy (SEM), Auger electron spectroscopy (AES) and X-ray photoelectron spectroscopy (XPS). It has been found that the native oxides present on the GaSb surface are more effectively removed when treated with ([(NH 4 ) 2 S/(NH 4 ) 2 SO 4 ] + S) than with (NH 4 ) 2 S or Na 2 S·9H 2 O, as evidenced by the ratio of the O 506eV to Sb 457eV AES peaks. XPS results reveal that Sb 2 S 3 /Sb 2 S 5 “replaces” Sb 2 O 3 /Sb 2 O 5 , suggesting that sulphur atoms substitute oxygen atoms in Sb 2 O 3 /Sb 2 O 5 to form Sb-S. It seems sulphurization only partially removes Ga 2 O 3 . Treatment with ([(NH 4 ) 2 S/(NH 4 ) 2 SO 4 ] + S) also results in a noteworthy improvement in the current-voltage (I-V) characteristics of Au/n-GaSb Schottky contacts compared to those fabricated on as-received material.

  3. Ethical codes. Fig leaf argument, ballast or cultural element for radiation protection?; Ethik-Codes. Feigenblatt, Ballast oder Kulturelement fuer den Strahlenschutz?

    Energy Technology Data Exchange (ETDEWEB)

    Gellermann, Rainer [Nuclear Control and Consulting GmbH, Braunschweig (Germany)

    2014-07-01

    The international association for radiation protection (IRPA) adopted in May 2004 a Code of Ethics in order to allow their members to hold an adequate professional level of ethical line of action. Based on this code of ethics the professional body of radiation protection (Fachverband fuer Strahlenschutz) has developed its own ethical code and adopted in 2005.

  4. Condition monitoring for offshore wind parks. A module for ensuring plant availability and risk minimization; Condition Monitoring fuer Offshore-Windparks. Ein Baustein zur Sicherstellung der Anlagenverfuegbarkeit und zur Risikominimierung

    Energy Technology Data Exchange (ETDEWEB)

    Hoering, B. [Deutsche Montan Technologie GmbH, Essen (Germany). Engine Logic Division

    2003-07-01

    The economic success of offshore wind energy and hence its competitiveness alongside conventional energy generation depends to a major extent on the reliability and availability of the installations. The profitability is determined, as is efficiency, by the costs for operation and maintenance over the whole plant life. Only plants with low operational management costs are therefore attractive in the long-term for the market and will help create customer satisfaction and loyalty. Because the costs for servicing and maintenance of offshore installations will be several times higher than for onshore facilities, the manufacturers and operators are called upon to think about new approaches to monitoring and maintaining offshore wind turbines. (orig.) [German] Der wirtschaftliche Erfolg der Offshore-Windenergie und somit die Konkurrenzfaehigkeit gegenueber konventioneller Energiegewinnung haengt massgeblich von der Zuverlaessigkeit und der Verfuegbarkeit der Anlagen ab. Die Wirtschaftlichkeit wird neben dem Wirkungsgrad durch die Kosten fuer Betrieb und Wartung waehrend der gesamten Anlagenlebensdauer bestimmt. Nur Anlagen mit geringen Betriebsfuehrungskosten sind daher fuer den Markt langfristig attraktiv und tragen zur Kundenzufriedenheit und -bindung bei. Weil die Kosten fuer Wartung und Instandhaltung von Offshore-Anlagen um ein vielfaches hoeher sein werden als bei Onshore-Anlagen, sind die Hersteller und Betreiber aufgefordert, ueber neue Konzepte der Windenergieanlagen-(WEA-)Ueberwachung und -instandhaltung nachzudenken. (orig.)

  5. Data warehouse solution for energy management tasks of a power generation corporation in a competitive market; Data-Warehouse-Loesung fuer die Energiemanagementaufgaben eines Stromerzeugungsbereiches in einem wettbewerblichen Umfeld

    Energy Technology Data Exchange (ETDEWEB)

    Brugger, H. [Siemens AG, Vienna (Austria). Bereich Energieuebertragung und -verteilung; Nobach, U. [Siemens AG, Nuernberg (Germany). Bereich Energieuebertragung und -verteilung; Hoenes, R.; Vetter, T. [Neckarwerke Stuttgart AG (Germany)

    1999-04-19

    Liberalization of the energy market gives new requirements to the organization of the departments of utilities and their IT-solutions. The authors explain by using the example of the new energy management system for Neckarwerke Stuttgart AG, how a modern Data Warehouse-platform is created for the operative and economic tasks for electricity supply and district heating in a competitive market. (orig.) [Deutsch] Aufgrund der Liberalisierung des Strommarktes erwachsen bei den Energieversorgungsunternehmen neue Anforderungen an die Organisation der Geschaeftsbereiche und an die EDV-Hilfsmittel. Die Verfasser erlaeutern am Beispiel des neuen Energiemanagementsystems fuer die Neckarwerke Stuttgart AG wie mit einem modernen Data Warehouse die Plattform fuer die Loesung der operativen und der wirtschaftlichen Aufgaben der Strom- und Fernwaermebeschaffung in einem Wettbewerbsumfeld geschaffen werden kann. (orig.)

  6. Electric heat pump for motor vehicles with R744 (CO{sub 2}) as refrigerant; Elektrisch betriebene Waermepumpe fuer Fahrzeuge mit dem Kaeltemittel R744 (CO{sub 2})

    Energy Technology Data Exchange (ETDEWEB)

    Huenemoerder, W.; Kakehashi, N. [DENSO Automotive Deutschland GmbH, Eching (Germany)

    2003-07-01

    R744 (carbon dioxide) is suited for low ambient temperatures. A motor car air conditioner on this basis was developed for engines with low heat emissions. The passenger compartment is heated and cooled by a single system comprising a semihermetic electric compressor and three air-filled heat transfer units, i.e. an evaporator and a gas cooler for heating inside the car and a heat exchanger on the outside which can serve as evaporator or gas cooler as desired. The system can be operated in four modes: Heating without dehumidification, heating and dehumidification, cooling, thawing of the external heat exchanger. In contrast to conventional systems, the heating and cooling mode are not independent of each other, so a special control concept was developed which enables automatic operation of the four above modes of operation. The system is used in the Toyota FCHV fuel cell car. (orig.) [German] Das Kaeltemittel CO{sub 2} (R744) kann auch bei niederen Umgebungstemperaturen fuer Waermepumpenanwendungen eingesetzt werden. Eine CO{sub 2}-Klimaanlage mit Waermepumpe wurde fuer die Klimatisierung (Heizen, Kuehlen und Entfeuchten) des Fahrzeuginnenraumes entwickelt. Diese Anlage ist fuer Elektro- und Breenstoffzellenfahrzeuge geeignet, bei denen keine Motorabwaerme zu Heizzwecken zur Verfuegung steht. Heizen und Kuehlen des Innenraumes erfolgt durch ein einziges System unter Verwendung derselben Komponenten. Die Anlage besteht aus einem halbhermetischen elektrischen Verdichter und drei luftbeaufschlagten Waermeuebertragern - ein Verdampfer und ein Gaskuehler (zum Heizen) im Innenraum und ein Waermeuebertrager aussen, der - je nach Betriebsart - als Verdampfer oder Gaskuehler betrieben wird. Die Anlage kann in vier Betriebsarten betrieben werden: Heizen ohne Entfeuchtung, Heizen mit Entfeuchtung, Kuehlen, Abtauen des aeusseren Waermeuebertragers. In konventionellen Systemen koennen Heiz- und Kuehlsystem unabhaengig voneinander geregelt werden. Bei dem hier vorgestellten

  7. Introductory strategies for the automation of suburban railway systems; Einfuehrungsstrategien fuer die Automatisierung von Nahverkehrsbahnen

    Energy Technology Data Exchange (ETDEWEB)

    Ritter, N. [Siemens Transportation Systems, Berlin (Germany)

    2001-04-01

    Driverless automatic operation is a cost-effective and passenger-friendly form of handling services in suburban railway systems. It is intended to introduce this operating mode also in railway systems that have so far been operated in a conventional mode. The article outlines solution concepts and introductory strategies for changing the operating mode. (orig.) [German] Der fahrerlose automatische Betrieb stellt eine wirtschaftliche und fahrgastfreundliche Form der Betriebsabwicklung von Nahverkehrssystemen dar. Ziel ist es, diese Betriebsform auch bei bislang konventionell betriebenen Bahnen einzufuehren. Der vorliegende Beitrag zeigt Loesungsansaetze und Einfuehrungsstrategien fuer die Umstellung auf einen automatischen Betrieb. (orig.)

  8. Inductively coupled plasma etching of III-V antimonides in BCl3/SiCl4 etch chemistry

    International Nuclear Information System (INIS)

    Swaminathan, K.; Janardhanan, P.E.; Sulima, O.V.

    2008-01-01

    Inductively coupled plasma etching of GaSb using BCl 3 /SiCl 4 etch chemistry has been investigated. The etch rates were studied as a function of bias power, inductively coupled plasma source power, plasma chemistry and chamber pressure. The etched surfaces remain smooth and stoichiometric over the entire range of plasma conditions investigated. The knowledge gained in etching GaSb was applied to etching AlGaAsSb and InGaAsSb in order to fabricate heterojunction phototransistors. As expected, InGaAsSb etch rate was much lower compared to the corresponding value for GaSb, mainly due to the relatively low volatility of indium chlorides. For a wide range of plasma conditions, the selectivity between GaSb and AlGaAsSb was close to unity, which is desirable for fabricating etched mirrors and gratings for Sb-based mid-infrared laser diodes. The surface roughness and the etch profile were examined for the etched GaSb, AlGaAsSb and InGaAsSb samples using scanning electron microscope. The high etch rates achieved (∼ 4 μm/min) facilitated deep etching of GaSb. A single layer, soft mask (AZ-4903 photoresist) was used to etch GaSb, with etch depth ∼ 90 μm. The deep dry etching of GaSb has many important applications including etching substrate windows for backside-illuminated photodetectors for the mid-infrared wavelength range

  9. Inductively coupled plasma etching of III-V antimonides in BCl{sub 3}/SiCl{sub 4} etch chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Swaminathan, K. [Department of Electrical and Computer Engineering, University of Delaware, Newark, Delaware 19716 (United States)], E-mail: swaminak@ece.osu.edu; Janardhanan, P.E.; Sulima, O.V. [Department of Electrical and Computer Engineering, University of Delaware, Newark, Delaware 19716 (United States)

    2008-10-01

    Inductively coupled plasma etching of GaSb using BCl{sub 3}/SiCl{sub 4} etch chemistry has been investigated. The etch rates were studied as a function of bias power, inductively coupled plasma source power, plasma chemistry and chamber pressure. The etched surfaces remain smooth and stoichiometric over the entire range of plasma conditions investigated. The knowledge gained in etching GaSb was applied to etching AlGaAsSb and InGaAsSb in order to fabricate heterojunction phototransistors. As expected, InGaAsSb etch rate was much lower compared to the corresponding value for GaSb, mainly due to the relatively low volatility of indium chlorides. For a wide range of plasma conditions, the selectivity between GaSb and AlGaAsSb was close to unity, which is desirable for fabricating etched mirrors and gratings for Sb-based mid-infrared laser diodes. The surface roughness and the etch profile were examined for the etched GaSb, AlGaAsSb and InGaAsSb samples using scanning electron microscope. The high etch rates achieved ({approx} 4 {mu}m/min) facilitated deep etching of GaSb. A single layer, soft mask (AZ-4903 photoresist) was used to etch GaSb, with etch depth {approx} 90 {mu}m. The deep dry etching of GaSb has many important applications including etching substrate windows for backside-illuminated photodetectors for the mid-infrared wavelength range.

  10. Alternative drives for motor cars. Hybrid systems, fuel cells, alternative energy sources. 3. ed.; Alternative Antriebe fuer Automobile. Hybridsysteme, Brennstoffzellen, alternative Energietraeger

    Energy Technology Data Exchange (ETDEWEB)

    Stan, Cornel [California Univ., Berkeley, CA (United States); Paris-1 Univ., 75 (France); Pisa Univ. (Italy); Perugia Univ. (Italy); Kronstadt Univ. (Russian Federation)

    2012-07-01

    vorgesehener Energietraeger, die technische Komplexitaet, Kosten, Sicherheit, Infrastruktur und Service bestimmen die Randbedingungen fuer die Einfuehrung alternativer Antriebe fuer Automobile. Die aktualisierte Uebersicht und Analyse der Prozesse, Antriebsmaschinen und Energietraeger, die in komplexen Energie-Management-Systemen fuer Automobile kombinierbar sind, bilden den Inhalt dieses Buches.

  11. Particle Reduction Strategies - PAREST. Prognosis of air quality and assessment of limit value exceedances in Germany for the reference years 2010, 2015 and 2020; Strategien zur Verminderung der Feinstaubbelastung - PAREST. Prognose der Luftqualitaet und Abschaetzung von Grenzwertueberschreitungen in Deutschland fuer die Referenzjahre 2010, 2015 und 2020. Teilbericht

    Energy Technology Data Exchange (ETDEWEB)

    Stern, Rainer [Freie Univ. Berlin (Germany). Inst. fuer Meteorologie, Troposphaerische Umweltforschung

    2013-06-15

    With the help of a data assimilation technique (optimal interpolation) a comprehensive forecast of O{sub 3}, PM10 and NO{sub 2} air quality in Germany for the years 2010, 2015 and 2020 was prepared. Based on these results, an assessment was made whether the limits of the European Air Quality Directive (2008/50/EC) can be observed in 2015 and 2020. [German] In diesem Bericht wurde mit Hilfe einer Datenassimilationstechnik (Optimale Interpolation) eine flaechendeckende Prognose der O{sub 3}-, PM10- und NO{sub 2}-Luftqualitaet in Deutschland fuer die Jahre 2010, 2015 und 2020 erstellt. Auf Basis dieser Ergebnisse wurde eine Abschaetzung vorgenommen, ob die Grenzwerte der europaeischen Luftqualitaetsrichtlinie (2008/50/EG) im Jahre 2015 und 2020 eingehalten werden koennen. Weiterhin wurde untersucht, was die in der Luftqualitaetsrichtlinie festgelegten Regelungen fuer die Feinstaeube PM2.5 fuer die PM2.5-Belastung in Deutschland bedeuten und ob das nationale Ziel fuer die Reduktion der PM2.5-Belastung unter den Emissionsbedingungen des Jahres 2020 erreicht werden kann.

  12. 1st Kassel user forum: Double-layer capacitors for high-performance applications. Proceedings '99; 1. Kasseler Anwenderforum: Doppelschichtkondensatoren fuer hohe Leistung. Tagungsband '99

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    Double-layer capacitors ('Super Caps') have excellent perspectives as dynamic short-term stores. They have a long life of more than 200000 cycles, immunity against full discharge, and are maintenance-free. Apart from their high short-term power density, they also have an extremely high energy density which recommends them for many applications. Currently, motor car engineering, autonomous networks, power quality and solar applications are investigated. [German] Doppelschichtkondensatoren oder 'Super-Caps' sind Speicher fuer elektrische Energie und weisen, dank ihrer Eigenschaften, hervorragende Perspektiven als dynamische Kurzzeitspeicher auf. Sie besitzen eine hohe Lebenserwartung von mehr als 200000 Zyklen, Immunitaet gegen vollstaendige Entladung und Wartungsfreiheit. Neben einer hohen Leistungsdichte im Kurzzeitbereich verfuegen sie ueber eine fuer Kondensatoren extrem hohe Energiedichte. Zahlreiche Einsatzgebiete koennen auf diese Weise erschlossen werden. Derzeit stehen die Bereiche Automobiltechnik, autarke Netze, Power Quality und solare Applikationen im Vordergrund. (orig.)

  13. Natural and anthropogenic environmental hazards. Research results of the Department of Applied Geology; Natuerliche und anthropogene Umweltgefaehrdungen. Forschungsergebnisse aus dem Lehrstuhl fuer Angewandte Geologie

    Energy Technology Data Exchange (ETDEWEB)

    Czurda, K.; Eiswirth, M.; Hoetzl, H. [comps.

    1998-12-31

    Applied geology is employed in mining geology, raw materials geology, engineering geology, and hydrogeology, of which the two last-mentioned are the most important for the Department of Applied Geology. This series of publications arose from the need of making research findings, dissertations, theses and conference papers accessible to the public faster and more comprehensively than in national and international journals. [Deutsch] Die Aufgaben der angewandten Geologie sind im weitesten Sinne in der Montangeologie, in der Rohstoffgeologie, in der Ingenieurgeologie und in der Hydrogeologie zu sehen. Der engere Aufgabenbereich der Institute fuer Angewandte Geologie konzentriert sich der heutigen Fragestellung entsprechend meist auf die Ingenieurgeologie und Hydrogeologie. Wenn wir daraus noch die Umweltgeologie ableiten, so ist der Lehr- und Forschungsschwerpunkt auch des Karlsruher Lehrstuhles fuer Angewandte Geologie (AGK=Angewandte Geologie Karlsruhe) umrissen. Die vorliegende Schriftenreihe ist aus der Notwendigkeit entstanden, Forschungsergebnisse, Dissertationen und ausgewaehlte Diplomarbeiten sowie Beitraege einschlaegiger Tagungen in Karlsruhe rascher und u.U. umfangreicher als in internationalen oder nationalen Journalen moeglich zu publizieren. (orig.)

  14. GEC Alsthom put their hopes on fuel cells: A large potential for PEM fuel cells; GEC Alsthom setzt auf Brennstoffzellen: Grosses Potential fuer PEMFC

    Energy Technology Data Exchange (ETDEWEB)

    Anon,

    1998-07-01

    Fuel cells are regarded as one of the high-tech products of great promise for future energy supplies. High hopes are pinned on the PEM technology: This low-temperature fuel cell is applicable to both mobile applications as well as stationary systems, i.e. from small-scale heating systems through to CHP systems of medium output. GEC Alsthom, who entered into a strategic alliance with Ballard, the market leader in fuel cell technology, are the first power plant manufacturers to commit themselves in the fuel cell market sector. (orig./CB) [Deutsch] Brennstoffzellen gelten als einer der Hoffnungstraeger der zukuenftigen Energieversorgung. Grosse Erwartungen werden dabei in die PEM-Technologie gesetzt: Diese Niedertemperatur-Brennstoffzelle eignet sich sowohl fuer mobile Anwendungen als auch fuer den stationaeren Einsatz - von kleinen Hausheizungsanlagen bis hin zu BHKW mittlerer Leistungklasse. Mit GEC Alsthom und seinem Engagement beim Marktfuehrer Ballard steigt nun erstmals ein grosser Energieanlagenhersteller verstaerkt in dieses Marktsegment ein. (orig.)

  15. Multiple myoma: current recommendations for imaging; Multiples Myelom: Aktuelle Empfehlungen fuer die Bildgebung

    Energy Technology Data Exchange (ETDEWEB)

    Hillengass, J. [Medizinische Universitaetsklinik, Abteilung fuer Haematologie, Onkologie und Rheumatologie, Heidelberg (Germany); Deutsches Krebsforschungszentrum, Abteilung Radiologie E010, Heidelberg (Germany); Delorme, S. [Deutsches Krebsforschungszentrum, Abteilung Radiologie E010, Heidelberg (Germany)

    2012-04-15

    zur Erfassung umschriebener Knochendestruktionen, von Osteoporose oder Frakturen. Die Ganzkoerper-low-dose-CT und Ganzkoerper-MRT ermoeglichen eine Darstellung sowohl des mineralisierten Knochens als auch des Knochenmarks mit einer hoeheren Sensitivitaet, hoeherem Patientenkomfort und im Falle der MRT ohne Strahlenbelastung. Nach den Ergebnissen der Literatur sind Schnittbildverfahren dem Roentgenskelettstatus signifikant ueberlegen, wobei die Ganzkoerper-MRT fuer den Nachweis insbesondere eines diffusen Knochenmarkbefalls signifikant besser ist als die Ganzkoerper-CT. Praktisch jeder osteodestruktive Herd ist in der MRT sichtbar. Allerdings ist fuer die Beurteilung der Osteodestruktion selbst wiederum eine CT erforderlich. Die Sensitivitaeten von PET/CT und MRT sind vergleichbar. Wie bereits in einigen Zentren insbesondere in Deutschland umgesetzt, sollten bei Verfuegbarkeit das Ganzkoerper-MRT und das Ganzkoerper-CT den konventionellen Roentgenskelettstatus ersetzen. Bei Erstdiagnose bzw. Verdacht auf eine monoklonale Gammopathie unklarer Signifikanz (MGUS), ''smoldering multiple myeloma'' und symptomatisches multiples Myelom sollten sowohl eine Ganzkoerper-MRT als auch eine Ganzkoerper-CT durchgefuehrt werden. Bei asymptomatischem Myelom oder MGUS waere die Ganzkoerper-MRT bis zur Detektion des ersten umschriebenen Myelomherdes ausreichend. Beim symptomatischen Myelom mit Knochenlaesionen sollten in der Regel die Ganzkoerper-CT und fuer spezielle Fragestellungen die MRT eingesetzt werden. (orig.)

  16. Materials colloquium `96: Thermal insulation coatings. Thermally insulating coating systems for heavy-duty structural components in aerospace engineering and energy engineering; Werkstoff-Kolloquium `96: Waermedaemmschichten. Waermeisolierende Schichtsysteme fuer hoechstbelastete Strukturbauteile in der Luft- und Raumfahrt sowie der Energietechnik

    Energy Technology Data Exchange (ETDEWEB)

    Peters, M.; Schulz, U.; Leushake, U.; Kaysser, W.A. [eds.

    1996-12-31

    The 15 contributions in this colloquium report document the current state of research and development in Germany in the field of thermally insulating layer structures for heavy-duty components like gas turbines. Five papers have been recorded separately in the ENERGY database. [Deutsch] Die 15 Beitraege in diesem Kolloquiumband dokumentieren den aktuellen Stand der Forschungs- und Entwicklungsarbeiten in Deutschland auf dem Gebiet der waermeisolierenden Schichtsysteme fuer hoechstbelastete Bauteile wie z.B. Gasturbinen. Fuer die Datenbank ENERGY wurden fuenf Artikel separat aufgenommen.

  17. Identification of areas and time intervals for inservice inspections; Auswahl der Pruefbereiche und -intervalle fuer wiederkehrende Pruefungen

    Energy Technology Data Exchange (ETDEWEB)

    Metzner, K J [Preussische Elektrizitaets-AG (Preussenelektra), Hannover (Germany); Herter, K H [Stuttgart Univ. (Germany). Staatliche Materialpruefungsanstalt; Schoeckle, F [Amtec Messtechnischer Service, Lauffen (Germany)

    1998-11-01

    von Schadensmechanismen), koennen die wiederkehrenden Pruefungen vorwiegend zielgerichtet hinsichtlich der Folgen dieser moeglichen Schadensmechanismen eingesetzt werden. Ist keine oder nur eine eingeschraenkte Ueberwachung vorhanden, sind die moeglichen Folgen eventuell bisher unbekannter Schadensmechanismen durch erweiterte und ggf. vagabundierende WKP-Massnahmen zu ueberpruefen. Fuer die Auswahl von Pruefbereichen und die Festlegung von Pruefintervallen ist die Verwendung der Auslegungsanalysen, in denen konservativ spezifizierte Belastungen und Lastfallhaeufigkeiten (fuer Betriebs- und Stoerfaelle) beruecksichtigt wurden, nicht geeignet. Es ist vielmehr von den `Ist-Beanspruchungen` aus dem bisherigen Betrieb in Verbindung mit der Kenntnis ueber die vorhandene `Istqualitaet` aus der Herstellung und der bisherigen Betriebszeit auszugehen. Die vorhandenen Unterlagen sind entsprechend aufzubereiten, so dass eine Grundlage fuer die Neubewertung der bisherigen ZfP-Massnahmen gegeben ist. (orig./MM)

  18. 77 FR 12340 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Order Granting...

    Science.gov (United States)

    2012-02-29

    ... of the GASB to establish standards of financial accounting and reporting applicable to state and... accepted accounting principles by the GASB.\\14\\ \\12\\ See 15 U.S.C. 77s(g)(1). \\13\\ See 15 U.S.C. 77s(g)(3... that, under the proposed rule, many diverse end users of GASB's accounting and financial reporting...

  19. Environmental policy. 2000 environmental expert opinion of the Council of Experimental Experts; Umweltpolitik. Umweltgutachten 2000 des Rates von Sachverstaendigen fuer Umweltfragen. Schritte ins naechste Jahrtausend. Kurzfassung

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-05-01

    The reorientation of energy policy is a key issue. The Council of Environmental Experts considers the further use of atomic energy to be irresponsible and recommends a new orientation. Recommendations are made on ecology-centered taxation. Critical comments are made in the context of conservation of nature, where many species of plants and animals still continue to be endangered. The conservation programme of the Federal government, which also comprises a system of large, interconnected biotopes on 10% of Germany's total surface, is approved, and the potential contribution of sustainable agricultural and forestry policy is discussed in a separate chapter. Further subjects discussed are recycling and waste management, protection of water and soil, air pollution abatement, health protection and genetic engineering. The environmental aspects of Eastern European states becoming EC members are gone into in particular. The network of Europen Environmental Councils, for which the German Council of Environmental Experts currently acts as a coordinator, makes intensive efforts to improve environmental counselling in these states. [German] Eines der Schwerpunktthemen des Umweltgutachtens ist die Neuordnung der Energiepolitik. Der Umweltrat haelt die weitere Nutzung der Atomenergie vor allem wegen der Risiken der Entsorgung nicht fuer verantwortbar. Er befuerwortet die Einleitung einer Energiewende. Zur oekologischen Steuerreform werden weiterfuehrende Empfehlungen unterbreitet. An vielen Stellen nimmt der Rat die Umweltpolitik auch kritisch unter die Lupe. Er weist auf den hohen Handlungsbedarf im Naturschutz hin. Eine dauerhafte Trendwende beim Grad der Gefaehrdung heimischer Tier- und Pflanzenarten sei in Deutschland noch nicht erreicht. Der Rat bestaetigt in diesem Zusammenhang die naturschutzpolitische Konzeption der Bundesregierung fuer einen Naturschutz auf der ganzen Flaeche, kombiniert mit einem grossflaechigen Biotopverbundsystem auf 10% der Landesflaeche. Der

  20. The environmental and radionuclide laboratory at VKTA Rossendorf; Das Labor fuer Umwelt- und Radionuklidanalytik im VKTA Rossendorf

    Energy Technology Data Exchange (ETDEWEB)

    Koehler, M.; Knappik, R.; Gleisberg, B.; Schaefer, I.; Boden, W.; Bothe, M. [Verein fuer Kernverfahrenstechnik und Analytik Rossendorf e.V. (VKTA), Dresden (Germany)

    2001-07-01

    The VKTA provides environmental and radionuclide analyses for remediation and waste management tasks at the Rossendorf research site and for commercial clients as well. The analyses, the correlated valuations and calculations were used for the decommissioning of nuclear facilities, for the remediation of contaminated mining sites and for environmental investigations. The Laboratory for Environmental and Radionuclide Analytics is able to handle and analyse artificial and natural radionuclides in the range from 10{sup -3} Bq until 10{sup 9} Bq. Besides the used activity measurement techniques ({alpha}-particle and {gamma}-ray spectrometry, {beta}-counting), which were also applied after radiochemical separations, mass-spectrometry with inductively coupled plasma provides analytical results for long-lived radionuclides and isotopic ratios very effective. The capability of the laboratory is demonstrated by selected applications. (orig.) [German] Der VKTA fuehrt im Rahmen seiner Rueckbau- und Entsorgungsaufgaben am Forschungsstandort Rossendorf und fuer externe Auftraggeber Umwelt- und Radionuklidanalysen als komplexe Dienstleistung durch. Die Analysen und die damit in Zusammenhang stehenden Bewertungen und Modellrechnungen finden beim Rueckbau kerntechnischer Anlagen, bei der Sanierung von Uranbergbau-Altlasten und im Umweltbereich Verwendung. Im Labor fuer Umwelt- und Radionuklidanalytik werden Proben mit kuenstlichen und natuerlichen Radionukliden im typischen Aktivitaetsbereich von 10{sup -3} Bq bis 10{sup 9} Bq bearbeitet und analysiert. Neben den Aktivitaetsmessverfahren ({alpha}-, {beta}-, {gamma}-Spektrometrie), die auch nach radiochemischen Trennungen eingesetzt werden, kommen massenspektrometrische Verfahren bei der Analyse langlebiger Radionuklide bzw. Isotopenverhaeltnisse zum Einsatz. Das Leistungsspektrum des Labors wird durch ausgewaehlte Applikationen belegt. (orig.)

  1. Vehicle based localization system for locomotives on the base of slip depending distance measurment; Fahrzeugautarkes Ortungssystem fuer Lokomotiven auf der Basis schlupfbehafteter Wegmessung

    Energy Technology Data Exchange (ETDEWEB)

    Scholz, C.

    2003-07-01

    effizienter zu nutzen und ihre Leistungen zu verbessern. Essentielle Voraussetzung fuer fast jede telematische Anwendung ist eine Fahrzeugortung. Der vermehrte Einsatz der Telematik bewirkt einen steigenden Bedarf an Ortungssystemen. Hohe Investitionen und zunehmender Kostendruck verhindern jedoch haeufig die Installation einer leistungsfaehigen Ortung. Im Rahmen der vorliegenden Arbeit wurde ein fahrzeugautarkes Ortungssystem fuer Lokomotiven entwickelt und erprobt. Das System arbeitet auf der Basis einer schlupfbehafteten Wegmessung an den Treibachsen, das den Schlupf in Abhaengigkeit der momentanen Zugkraft und Geschwindigkeit abschaetzt und korrigiert. Die Besonderheit dieses Systems ist, dass es im Wesentlichen mit der auf den Lokomotiven der Deutschen Bahn serienmaessig vorhandenen Infrastruktur auskommt. Das System koennte folglich schnell und kostenguenstig auf allen Fahrzeugen der Deutschen Bahn installiert werden. Das Ortungssystem wurde im Rahmen eines einjaehrigen Pilotbetriebs fuer die Steuerung der computergestuetzten Energiesparenden Fahrweise (ESF) der Deutschen Bahn getestet. Auf diese Weise konnte eine wesentliche Reduzierung des schlupfbedingten Wegmessfehlers im regulaeren Fahrplan-Betrieb experimentell nachgewiesen werden, so dass eine breite Nutzung fuer nicht-sicherheitsrelevante Anwendungen denkbar ist. Die schriftliche Ausarbeitung gibt einen Ueberblick ueber wichtige Begriffe und Aspekte der Ortung und der Kraftschluss-Schlupf-Charakteristik bei Schienenfahrzeugen. Es erfolgt die Beschreibung der Entwicklung und Erprobung des Ortungssystems. Die Auswertung der Messungen und die daraus resultierende Ortungsgenauigkeit des Systems zeigen die Eignung des Systems fuer eine betriebliche Ortung mittlerer Genauigkeit im Schienenverkehr. (orig.)

  2. Temperature effect on the growth of Au-free InAs and InAs/GaSb heterostructure nanowires on Si substrate by MOCVD

    Science.gov (United States)

    Kakkerla, Ramesh Kumar; Anandan, Deepak; Hsiao, Chih-Jen; Yu, Hung Wei; Singh, Sankalp Kumar; Chang, Edward Yi

    2018-05-01

    We demonstrate the growth of vertically aligned Au-free InAs and InAs/GaSb heterostructure nanowires on Si (1 1 1) substrate by Metal Organic Chemical Vapor Deposition (MOCVD). The effect of growth temperature on the morphology and growth rate of the InAs and InAs/GaSb heterostructure nanowires (NWs) is investigated. Control over diameter and length of the InAs NWs and the GaSb shell thickness was achieved by using growth temperature. As the GaSb growth temperature increase, GaSb radial growth rate increases due to the increase in alkyl decomposition at the substrate surface. Diffusivity of the adatoms increases as the GaSb growth temperature increase which results in tapered GaSb shell growth. Scanning Electron Microscope (SEM) and Transmission Electron Microscope (TEM) measurements revealed that the morphology and shell thickness can be tuned by the growth temperature. Electron microscopy also shows the formation of GaSb both in radial and axial directions outside the InAs NW core can be controlled by the growth temperature. This study demonstrates the control over InAs NWs growth and the GaSb shell thickness can be achieved through proper growth temperature control, such technique is essential for the growth of nanowire for future nano electronic devices, such as Tunnel FET.

  3. Electric Co'Co' bi-voltage locomotive class EG 3100 of DSB; Co'Co'-Zweifrequenzlokomotive EG 3100 fuer Danske Statsbaner

    Energy Technology Data Exchange (ETDEWEB)

    Pedersen, B.O. [DSB Materiel Technik, Copenhagen (Denmark); Joergensen, O.A. [Siemens AG, Erlangen (Germany). Abt. VT 62; Proell, J. [Siemens AG, Muenchen (Germany). Abt. VT 68

    2000-12-01

    DSB has purchased a series of heavy electric locomotives for hauling transit freight trains between Central Europe and Scandinavia. Demands, basic features and technical components are described in detail. (orig.) [German] Fuer den Transitgueterverkehr zwischen Mitteleuropa und Skandinavien hat Danske Statsbaner eine Serie schwerer elektrischer Lokomotiven beschafft. Die Anforderungen, das Grundkonzept und die technischen Komponenten werden ausfuehrlich beschrieben. (orig.)

  4. Electric Co'Co' bi-voltage locomotive class EG 3100 of DSB; Co'Co'-Zweifrequenzlokomotive EG 3100 fuer Danske Statsbaner

    Energy Technology Data Exchange (ETDEWEB)

    Pedersen, B.O. [DSB Materiel Technik, Copenhagen (Denmark); Joergensen, O.A. [Siemens AG, Erlangen (Germany). Abt. VT 62; Proell, G. [Siemens AG, Muenchen (Germany). Abt. VT 68

    2001-07-01

    DSB has purchased a series of heavy electric locomotives for hauling transit freight trains between Central Europe and Scandinavia. Demands, basic features and technical components are described in detail. (orig.) [German] Fuer den Transitgueterverkehr zwischen Mitteleuropa und Skandinavien hat Danske Statsbaner eine Serie schwerer elektrischer Lokomotiven beschafft. Die Anforderungen, das Grundkonzept und die technischen Komponenten werden ausfuehrlich beschrieben. (orig.)

  5. Amended EC Directive on the limitation of emissions of certain pollutants into the air from large combustion plants. Implications for German power plants; Neue EG-Richtlinie fuer Grossfeuerungsanlagen. Folgerungen fuer deutsche Kraftwerke

    Energy Technology Data Exchange (ETDEWEB)

    Hildebrand, M. [Verband der Elektrizitaetswirtschaft - VDEW - e.V., Frankfurt (Germany). Bereich Recht und Umwelt

    2002-03-11

    The article highlights the major improvements in terms of reducing emissions from large combustion plants, comparing the new limiting values and specifications with those of the former Directive. As Germany is obliged to transform the new EC Directive into national law within twelve months from its entry into force, an amendment of the respective German regulation can be expected soon. (orig./CB) [German] Mit der im Herbst 2001 durch das Europaeische Parlament und den Umweltministerrat verabschiedeten Novelle der Grossfeuerungsanlagen-Richtlinie hat die Europaeische Union einen markanten, laengst ueberfaelligen Schritt zur EU-weiten Angleichung der emissionsseitigen Anforderungen an grosse Feuerungsanlagen unternommen. Mit dem Inkrafttreten der novellierten Grossfeuerungsanlagen-Richtlinie wurde aber auch der formale Anstoss fuer eine Aktualisierung der deutschen Grossfeuerungsanlagen-Verordnung (13.BImSchV) gegeben. (orig./CB)

  6. Transformation strategies for multi-utility companies; Transformationsstrategien fuer Multi Utility-Unternehmen

    Energy Technology Data Exchange (ETDEWEB)

    Apking, W.; Bosse, F.; Kroepelin, C.; Schaudinn, D.; Uhlmann, K. [PriceWaterhouseCoopers Unternehmensberatung GmbH, Hamburg (Germany)

    2000-05-01

    Energy supply companies (resellers) and electric utilities as traders in the liberalized markets increasingly focus their activities on their core businesses and offer their capabilites also in other branches of industry, thus achieving synergistic effects. The evolution of e-commerce in the energy supply sector in Germany is described in this article, and recommendations are given to companies as to suitable change management strategies for successful marketing and procurement via the world wide web, using IP technologies as a basis for transactions. (CB) [German] Energieversorgungsunternehmen (EVU) besinnen sich auf ihre Kernkompetenzen, bieten diese auch in anderen Branchen an und erzielen damit Synergieeffekte. Ein weiterer Aspekt ist die zunehmende Vernetzung der europaeischen Stromnetze. Die Konvergenz der Maerkte wird ferner durch den Einsatz von IP(Internet-Protokoll)-Technologien vorangetrieben, da das Internet eine Informations- und Transaktionsplattform fuer saemtliche Marktteilnehmer schafft. Welche diesbezueglichen Transformationsstrategien von den EVU bereits heute zu ergreifen sind, wird anschaulich aus einem hierzu entwickelten Modell abgeleitet. (orig./CB)

  7. Interventional magnetic resonance imaging - non-invasive imaging for interventions; Interventionelle Magnetresonanztomographie - nichtinvasive Bildgebung fuer Interventionen

    Energy Technology Data Exchange (ETDEWEB)

    Buecker, A.; Adam, G.; Neuerburg, J.M.; Glowinski, A.; Tacke, J.; Guenther, R.W. [Technische Hochschule Aachen (Germany). Medizinische Fakultaet

    2000-02-01

    As a prerequisite for MR-guidance of interventional procedures, instruments have to be well depicted in the MR image without obscuring or distorting the underlying anatomy. For non-vascular interventions the imaging speed has to be in the range of seconds while control of vascular interventions requires real time imaging speed. The imaging contrast has to be maintained as well as a high spatial resolution. Furthermore, sufficient patient access has to be provided by the MR scanner. Neither an ideal magnet nor the optimal single sequence are available to fulfill the above-mentioned criteria. The type of sequence - gradient echo versus spin echo - together with changing of the echo time and phase encording direction will ensure an appropriate size of the artifact and thereby of the appearance of the instrument in the MR image. The feasibility of non-vascular MR-guided interventions has been proved at field strengths ranging from 0.064 T to 1.5 T. Bone biopsies, soft tissue biopsies, drainages, and control of interstitial thermo- and cryotherapy have been reported. For vascular interventions, different real time MR strategies are currently under investigation. The development of dedicated catheters and guide wires has enabled MR-guided dilatations, stenting, placement of vena cava filters, and TIPS procedures. Considering the fast progress being made in this field, there can be no question that interventional MRI will become a well-accepted clinical tool offering potential advantages such as excellent soft tissue contrast, multiplanar imaging, flow measurements, high resolution imaging of vessel walls, and lack of ionizing radiation. (orig.) [German] Zur Durchfuehrung MR-gesteuerter Interventionen muessen interventionelle Instrumente gut sichtbar, aber ohne stoerende Artefakte darstellbar sein. Die Geschwindigkeit der Bilderstellung sollte fuer nichtvaskulaere Interventionen im Sekundenbereich liegen und fuer vaskulaere Interventionen Echtzeitbildgebung liefern. Weder

  8. Research parallel to 'Solarthermie 2000'. Development of a standardized acceptance test for industrial-scale solar thermal systems. Final report; Begleitforschung Solarthermie 2000. Entwicklung eines standardisierten Abnahmeverfahrens fuer solarthermische Grossanlagen. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Beikircher, T.; Benz, N.; Gut, M.; Schwenk, C.; Schoelkopf, W.

    2000-02-01

    First, a simple and efficient tool for projecting solar thermal power systems was to be developed by ITW Stuttgart (see separate ITW Stuttgart report). Parallel to this, a fast and simple method was to be developed for in-situ assessment or the annual yield of such systems, with a maximum error of 5 percent. The following steps were taken: 1. Development of a measuring system for the task; 2. Selection of methods of evaluation for the dynamic in situ short-term test; 3. Development and testing of the method in several industrial-scale systems and validation by comparison with the results of conventional measurements. The dynamic in situ short-term test method developed on this basis consists of six steps which are described in the report. The measuring accuracy depends on the correct function of the plant. [German] Zunaechst sollte fuer solarthermische Grossanlagen ein Katalog standardisierter Anlagenkonfigurationen erstellt und anschliessend in die gaengigen Planungswerkzeuge TRNSYS und TSOL uebertragen werden, um Planern ein einfaches und leistungsfaehiges Werkzeug zur Auslegung und zur Berechnung des GSR zur Verfuegung zu stellen. Damit sollen Planungsfehler aufgrund fehlender Erfahrung mit Solaranlagen vermieden und ein Standard fuer innovative Anlagenkonzepte verbreitet werden. Dieser Arbeitspunkt wurde ausschliesslich durch das ITW Stuttgart bearbeitet, siehe separater Berichtsteil des ITW Stuttgart. Parallel dazu war ein Testverfahren zu entwickeln, mit dem der Jahresertrag grosser thermischer Solaranlagen in situ, d.h. an der installierten Anlage vor Ort, ohne Eingriff in die Anlage, um die Gewaehrleistungspflicht des Anlagenbauers zu erhalten, auf 5% genau, um ein klares juristisches Kriterium fuer die Feststellung einer etwaigen Nachbesserungspflicht des Erbauers zu haben, kostenguenstig und in kurzer Zeit (maximal 6 Wochen) bestimmt werden kann. Hierzu waren folgende Arbeiten notwendig: 1. Entwicklung einer an die Aufgabenstellung angepassten Messtechnik

  9. Basic methodology of tomographic imaging by filtered inverse projection at a turbo-pump. Project report; Methodische Grundlagen fuer die Tomographie durch gefilterte Rueckprojektion an einer Axialpumpe. Projektbericht

    Energy Technology Data Exchange (ETDEWEB)

    Hoppe, D.

    2000-11-01

    A two-phase medium consisting of a fluid containing gas is transported in a turbo-pump via an impeller. The interaction between the gaseous phase and the impeller is to be examined by tomography with gamma rays. Reconstruction of the image of the object is to be made by way of filtered inverse projection. The methodology of using this principle in the given system (geometry and measuring conditions) is explained. (orig./CB) [German] Ein zweiphasiges, aus einer gashaltigen Fluessigkeit bestehendes Medium wird in einer Axialpumpe von einem propellerartigen Laufrad senkrecht zur Drehachse dieses Laufrades transportiert. Die Wechselwirkung zwischen der Gasphase und dem Laufrad soll unter Verwendung von Gamma-Strahlung mittels Tomographie untersucht werden. Dabei ist fuer die Rekonstruktion des Objektbildes das Prinzip der sogenannten gefilterten Rueckprojektion vorgesehen. Die methodischen Grundlagen fuer die Nutzung dieses Prinzips unter von vorgesehenen geometrischen und messtechnischen Bedingungen sind Gegenstand dieser Arbeit. (orig.)

  10. Database for 'Environment 2000' environment presentation for EXPO 2000. Appendix 1 and 2: experimental data; Informationsgrundlage fuer das Umweltpraesentationssystem des BMU 'Umwelt 2000 im Rahmen des Teilvorhabens 2 des Globalansatzes Expo 2000'. Mit Anhang 1 und 2: 1. Katalog zur konsistenten Vorgehensweise bei der Erfassung von Rahmeninformationen in der Datenbank Grunddaten. 2. Datengrundlage fuer Umwelt Deutschland

    Energy Technology Data Exchange (ETDEWEB)

    Schoen, M.; Hillenbrand, T.; Kuntze, U.; Nathani, C.; Toussaint, D.; Behnke, L.; Michi, S.; Rauscher, J.; Ziesing, H.J.; Knoerr, W.; Tochtermann, K.; Dombeck, T.; Kadric, L.

    2002-03-01

    Goal of the study was to create a documentary system containing the relevant information available in the Federal Republic of Germany in order to provide a wide-scale presentation of the environmental situation. The theme catalogue which has been extended and modified in the course of the research work contains about 150 items. In order to obtain trend statements, a period of at least 10 years - between 1990 and 2000 - had to be evaluated. Since most of the available empirical time series do not go beyond 1998, projections based here on allowing a foresight on the medium-term developments in the subsequent two years or more were required. In two selected theme fields, scenarios until the year 2020 had to be developed: scenarios of emissions of greenhouse gases and precursors of greenhouse gases as well as for traffic development and environmental pollution caused by traffic. The basis for the documentary administration is the data bank 'DB Grunddaten' ('basic data'). This data bank was developed by the Federal Environmental Agency and had to be completed for the presentation system environment Germany. (orig.) [German] Fuer eine flaechendeckende Gesamtdarstellung des Umweltzustandes in Deutschland sollten die auf Bundesebene verfuegbaren Informationsbausteine in einem Dokumentationssystem bereitgestellt werden. Der im Lauf der Bearbeitung erweiterte und modifizierte Themenkatalog umfasste ca. 150 Positionen. Die Ordnung dieses Themenkataloges ist an den Pressure-State-Response-Ansatz angelehnt. Zur Ermoeglichung von Trendaussagen sollte dort, wo moeglich und sinnvoll, ein Darstellungszeitraum von mindestens zehn Jahren von 1990 bis 2000 gewaehlt werden. Da die verfuegbaren empirischen Zeitreihen meist nicht weiter als bis zum Jahr 1998 reichten, waren darauf aufbauende Projektionen der mittelfristigen Entwicklung ueber einen Zeitraum von zwei Jahren oder mehr erforderlich. In zwei ausgewaehlten Themenbereichen waren auch ueber das Jahr 2000

  11. Municipal energy concepts. A service task for electric utility companies; Kommunale Energiekonzepte. Eine Dienstleistungsaufgabe fuer Energieversorgungsuntemehmen

    Energy Technology Data Exchange (ETDEWEB)

    Just, W. [Stadtwerke Gelsenkirchen GmbH (Germany)

    1994-11-01

    The article explains to what extent suitable measures can be realized and supported in a municipality with municipal energy concepts or even climate protection concepts. The target is to attain with limited financial means the most favourable economic and ecological effects in the municipality or in the region. Many electric utilities have in the last years forced the realization of energy conservation measures and have become energy service companies. With their expert knowledge they are ideal partners for politics, public adminstration and citizens. They have the best qualificatons for the development and realization of municipal concepts. In many cases it shows that with detailed studies the target can be quicker and more effectively attained as with extensive, time-consuming and expensive studies which are not particularly realization-oriented. The report is to give examples which might be helpful for the development of a concept. (orig./UA) [Deutsch] Der Beitrag erlaeutert, inwieweit umfangreiche kommunale Energiekonzepte oder sogar Klimaschutzkonzepte geeignete Massnahmen in der Kommune realisieren und foerdern koennen. Ziel sollte sein, mit begrenztem Mitteleinsatz die oekonomisch-oekologisch groessten Effekte in der Kommune bzw. in der Region zu erzielen. Viele Energie-Versorgungsunternehmen haben in den letzten Jahren die Realisierung von Energieparmassnahmen vorangetrieben und sich zu Energie-Dienstleistungsunternehmen entwickelt. Mit ihrer Sachkompetenz sind sie der ideale Partner fuer Politik, oeffentliche Verwaltung und Buerger/innen. Sie bringen die besten Voraussetzungen mit bei der Erarbeitung und Umsetzung von kommunalen Konzepten. Vielfach zeigt sich, dass Detailkonzepte schneller und wirkungsvoller zum Ziel fuehren, als umfachreiche, zeitaufwendige und teure Studien, die wenig umsetzungsorientiert sind. Die nachfolgenden Ausfuehrungen sind als Beispiele gedacht. Sie koennen Anregungen fuer die Erstellung eines Konzeptes vermitteln. (orig./UA)

  12. Campaigns for renewable energy - the evaluation of 'Solar-na klar.' and a framework concept for new campaigns; Kampagnen fuer erneuerbare Energien - Die Evaluation von 'Solar-na klar.' und Empfehlungen fuer neue Kampagnen

    Energy Technology Data Exchange (ETDEWEB)

    Duscha, M.; Schuele, R.; Gross, D.; Lambrecht, K.; Lucius, W.; Johansson, J.; Rieder, S.

    2002-04-01

    , localized relevant target groups and condensed recent image studies about renewable energies in Germany. As a result, the report details the main elements and conditions that are necessary for campaigns that cover all types of renewable energies, such campaigns are supported in principal by all stakeholder groups. (orig.) [German] (a) Die Kampagne 'Solar - na klar.' unterstuetzt seit 1999 eine verstaerkte Verbreitung von solarthermischen Anlagen durch vielfaeltige Oeffentlichkeitsarbeit und Dienstleistungen. Die Evaluation der Kampagne kam bezueglich der externen Wirkungen zu ueberwiegend positiven Ergebnissen: Die zentralen Zielgruppen, Handwerker und der Ein-/Zweifamilienhausbesitzer, wurden durch die Kampagne gut erreicht und mit gutem Informationsmaterial angesprochen. Darueber hinaus schaetzte ca. ein Viertel der Haushalte, die eine solarthermische Anlage installierten, den Einfluss der Kampagne eher hoch ein. Allerdings vermissten die Haushalte zum Teil weiterfuehrende Informationen. Auch die befragten Handwerker aeusserten eine relativ grosse Zufriedenheit mit der Kampagne. Sie nutzten die bereitgestellten Informationsmaterialien der Kampagne jedoch nur sehr selten. Die Evaluation der internen Grundlagen und Prozesse fuehrt zu ambivalenten Ergebnissen: Beispielsweise ist es der Kampagne auf der einen Seite gelungen, eine breite und heterogene Traegerschaft zu gewinnen und flexibel auf aeussere Anforderungen zu reagieren. Auf der anderen Seite stellten sich Probleme in der Steuerung und im Konfliktmanagement ein. Hierzu trugen u.a. eine nicht ausreichend integrierte Projektplanung sowie strukturelle Unterschiede zwischen den Partnern bei. Die Evaluation muendet in der zentralen Empfehlung, die Kampagne in modififizierter Form fortzusetzen. Verbesserungsmoeglichkeiten sehen die Evaluatoren u.a. in der verstaerkten Einbindung regionaler Aktvitaeten. (b) Als Grundlage fuer die Empfehlungen fuer weitere Kampagnen fuer erneuerbare Energien analysierte das ifeu

  13. Integrated market research as a basis for target group oriented marketing; Integrierte Marktforschung als Basis fuer zielgruppenorientiertes Marketing

    Energy Technology Data Exchange (ETDEWEB)

    Welzel, D.; Meinecke, B. [Meinecke und Rosengarten GmbH, Hamburg (Germany)

    2000-02-01

    Deregulation of the energy markets may, in the long run, also involve free choice of gas suppliers. Marketing research offers methods for assessing the customers' needs and wishes and for controlling and improving the measures taken. [German] In Folge der Liberalisierung der Energiemaerkte wird es in absehbarer Zeit voraussichtlich auch fuer die Haushaltskunden im Gasbereich moeglich sein, den Versorger frei zu waehlen. Die Marktforschung bietet verschiedene Methoden an, mit deren Hilfe die Beduerfnisse der Kunden im Hinblick auf Kundenbindung aber auch -gewinnung ermittelt und die Wirksamkeit ergriffener Massnahmen kontrolliert und verbessert werden kann. (orig.)

  14. Electrochemical storage systems for renewable power supply systems. Workshop; Elektrochemische Speichersysteme fuer regenerative Energieversorgungsanlagen. Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Garche, J.; Hoehe, W. [Zentrum fuer Sonnenenergie- und Wasserstoff-Forschung Baden-Wuerttemberg (ZSW), Ulm (Germany); Stadermann, G. [eds.] [Forschungsverbund Sonnenenergie, Berlin (Germany)

    1999-07-01

    This volume contains 26 contributions on batteries and PV systems. Vol. 1 discusses the following subjects: 1. Evaluation and assessment of the performance of battery systems in existing PV systems; 2. Status and prospects of storage systems; 3. Experience, requirements and markets; 4. Storage battery operation and assessment; 5. Systems engineering and operation of PV systems. [German] Dieser Band enthaelt 26 Beitraege zum aktuellen Stand der Batterien sowie der dazugehoerigen Systeme fuer Photovoltaik-Anlagen. Der Band ist in fuenf Themenbereiche unterteilt: 1. Auswertung und Bewertung des Betriebsverhaltens von Batteriesystemen in bestehenden PV-Anlagen; 2. Stand und Zukunft von Speichersystemen; 3.Erfahrungen, Anforderungen und Maerkte; 4. Speicher-Betriebsfuehrung und -Zustandsbestimmung; und 5. Systemtechnik und Betriebsfuehrung von PV-Systemen.

  15. Assessment of the safety factor of the new EC-specified test gas for intrinsically safe electric circuits of mining equipment; Ermittlung des Sicherheitsfaktors des neuen in der EG festgelegten Pruefgases fuer eigensichere Stromkreise von Bergbau-Betriebsmitteln

    Energy Technology Data Exchange (ETDEWEB)

    Hauke, R. [Fachstelle fuer Sicherheit Elektrischer Betriebsmittel, Dortmund (Germany). Bergbauversuchsstrecke

    2001-07-01

    The real safety factor of the new gas (52 % by volume H{sub '}'/air mixture) was compared to the earlier gas mixture (ethylene) for group I (methane) was investigated. Further, it was investigated whether more or less intrinsically safe systems can be connected to a single supply source. Extensive experiments were carried out in two test sites, supplemented by evaluations of earlier BVS experiments and a literature search. [German] Im Rahmen des Vorhabens sollte die Hoehe des realen Sicherheitsfaktors der neuen Wasserstoffmischung (52 Vol.-% H{sub 2}/Luft-Gemisch) im Vergleich zu der frueher verwandten Pruefgasmischung (Ethylen) fuer die Gruppe I (Methan) untersucht werden. Ebenfalls sollte eine Antwort auf die Frage gesucht werden, ob das neue Pruefgasgemisch eine Erleichterung fuer die Bescheinigungspraxis von eigensicheren Systemen fuer den Steinkohlenbergbau mit sich bringt (mehr Verbraucher an eine speisende Quelle moeglich) oder ob eine Beschraenkung (wesentlich weniger Verbraucher an eine speisende Quelle) zu erwarten ist. Beide Fragestellungen konnte durch ein umfangreiches Versuchsprogramm, das an zwei aufgebauten Pruefplaetzen innerhalb der verlaengerten Projektlaufzeit durchgefuehrt wurde, in Verbindung mit der Neuauswertung aelterer Versuche der BVS und der recherchierten Literatur beantwortet werden. (orig.)

  16. Device design of GaSb/CdS thin film thermal photovoltaic solar cells%基于GaSb/CdS薄膜热光伏电池的器件设计∗

    Institute of Scientific and Technical Information of China (English)

    吴限量; 张德贤; 蔡宏琨; 周严; 倪牮; 张建军

    2015-01-01

    基于GaSb薄膜热光伏器件是降低热光伏系统成本的有效途径之一,本文主要针对GaSb/CdS薄膜热光伏器件结构进行理论分析.采用AFORS-HET软件进行模拟仿真,分析GaSb和CdS两种材料各自的缺陷态密度、界面态对电池性能的影响.根据软件模拟可以得知,吸收层GaSb的缺陷态密度以及GaSb与CdS之间的界面态密度是影响电池性能的重要因素.当GaSb缺陷态增加时,主要影响电池的填充因子,电池效率明显下降.而作为窗口层的CdS缺陷态密度对电池性能影响不明显,当CdS缺陷态密度上升4个数量级时,电池效率仅下降0.11%.%Enthusiasm in the research of thermo-photovoltaic (TPV) cells has been aroused because the low bandwidth semi-conductors of III-V family are coming into use. GaSb, as a member of III-V family, has many merits such as high absorption coeffcient, and low band gap of 0.725 eV at 300 K etc.. At present thermo-photovoltaic cells are usually based on GaSb wafer, and it can be manufactured by the vertical Bridgeman method. Thermo-photovoltaic cell based on GaSb films is one of the effective ways to reduce the cost of the thermo-photovoltaic system. GaSb polycrystalline films can be grown by physical vapor deposition (PVD) which has advantages in using fewer materials and energy, and also in doing little harm to the environment. Because of residual acceptor defects VGaGaSb, GaSb thin film is usually of p-type semiconductor. So we should find n-type semiconductor material to form pn junction. We choose CdS as the emission layer of a cell structure. CdS belongs to n-type semiconductor with a narrow band gap of 2.4 eV and high light transmissivity. CdS thin film grown by chemical bath deposition (CBD) has passivation properties for GaSb. CdS layers can remove native oxides from GaSb surface and reduce the surface recombination velocity of GaSb. This paper focuses on theoretical analysis of GaSb/CdS thin film photovoltaic

  17. Three dimensional atom probe imaging of GaAsSb quantum rings

    International Nuclear Information System (INIS)

    Beltran, A.M.; Marquis, E.A.; Taboada, A.G.; Ripalda, J.M.; Garcia, J.M.; Molina, S.I.

    2011-01-01

    Unambiguous evidence of ring-shaped self-assembled GaSb nanostructures grown by molecular beam epitaxy is presented on the basis of atom-probe tomography reconstructions and dark field transmission electron microscopy imaging. The GaAs capping process causes a strong segregation of Sb out of the center of GaSb quantum dots, leading to the self-assembled GaAs x Sb 1-x quantum rings of 20-30 nm in diameter with x∼0.33. -- Highlights: → Atom-probe tomography resolves QR morphology of GaSb self-assembled GaSb buried nanostructures. → From atom-probe tomography compositional distribution has been obtained. → Strong segregation and morphological changes are observed with respect to uncapped QR.

  18. Further development and optimisation of the free piston concept for Vuilleumier heat pumps. Final report; Weiterentwicklung und Optimierung des Freikolben-Konzeptes fuer Vuilleumier-Waermepumpen. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Kuehl, H.D.; Ruether, J.

    2003-09-01

    The project was aimed at the development of know-how for commercial application of Vuilleumier heat pumps in heating systems for domestic buildings. The investigations were successful. The only aspect that requires further investigation are the static gas stores. (orig.) [German] Das Ziel dieses Projektes, die Erarbeitung des fuer eine zukuenftige kommerzielle Umsetzung der Vuilleumier-Freikolbentechnik in Waermepumpen zur Gebaeudeheizung erforderlichen Know-how, kann auf Grund der vorliegenden Ergebnisse in grossen Teilen als erreicht bezeichnet werden. Lediglich im Bereich der statischen Gaslager besteht noch Bedarf an weiterfuehrenden, quantitativen Untersuchungen ihres Tragverhaltens, waehrend insbesondere die Fragestellungen im Bereich der thermodynamischen sowie der waerme-, stroemungs- und regelungstechnischen Auslegung und Gestaltung zufriedenstellend geklaert werden konnten. Abgesehen von einigen weiteren Detailoptimierungen und der noch ausstehenden, umfassenden experimentellen Dokumentation der neuen Versuchsmaschine ist eine Weiterfuehrung der Arbeiten nicht mehr als reines Hochschulprojekt, sondern nur mit Industriebeteiligung und unter besonderer Beruecksichtigung fertigungs- und produktionstechnischer Aspekte sinnvoll. Der erreichte Entwicklungsstand mit zwei funktionsfaehigen Versuchsanlagen und dem im Verlaufe dieses Projektes erworbenen, fuer eine kommerzielle Produktentwicklung verfuegbaren Know-how bietet hierfuer eine gute Grundlage. (orig.)

  19. Value of new MR techniques in MR-PET; Stellenwert neuer MR-Techniken in der MR-PET

    Energy Technology Data Exchange (ETDEWEB)

    Attenberger, U.I.; Schoenberg, S.O. [Universitaetsmedizin Mannheim, Medizinische Fakultaet Mannheim der Universitaet Heidelberg, Institut fuer klinische Radiologie und Nuklearmedizin, Mannheim (Germany); Quick, H.H. [Friedrich-Alexander-Universitaet Erlangen-Nuernberg, Institut fuer Medizinische Physik, Erlangen (Germany); Guimaraes, A. [Massachusetts General Hospital, Martinos Center for Biomedical Imaging, Department of Radiology, Charlestown (United States); Catalano, O. [University of Naples Federico II, Naples (Italy); Morelli, J.N. [The Johns Hopkins Hospital, The Russell H. Morgan Department of Radiology and Radiological Science, Baltimore (United States)

    2013-12-15

    wiederholte Untersuchungen durchlaufen muessen, und paediatrische Patienten relevant ist. Dabei koennen jedoch die Erfahrungen, die im Verlauf der letzten Jahre mit der Hybridtechnologie PET-CT gewonnen wurden, nicht direkt auf die MR-PET uebertragen werden. Ein wesentliches Beispiel hierfuer ist die Schwaechungskorrektur, fuer die in der PET-CT die mittels CT bestimmten Hounsfield-Einheiten verwendet werden. Da die in der PET emittierten 511-keV-Photonen durch das Koerpergewebe des Patienten geschwaecht werden, werden die CT-Datensaetze in sog. lineare Schwaechungskoeffizienten (''linear attenuation coefficients'', LAC) konvertiert. Da die Bilddatenakquisition in der MRT nicht auf einer Schwaechung von Roentgenstrahlung, sondern einer Messung der Protonendichte und von gewebespezifischen Relaxationszeiten basiert, muessen in der MR-PET alternative Verfahren zur Schwaechungskorrektur eingesetzt werden. Darueber hinaus bietet die MRT auch alternative Sequenz- und Akquisitionstechnologien, die es erlauben, bisherige Limitationen z. B. bzgl. der Bewegungskorrektur zu adressieren. Dieser Artikel berichtet ueber initiale klinische Erfahrungen mit einem voll integrierten MR-PET-System, wobei MR-Techniken zur Korrektur von Bewegungsartefakten, die Schwaechungskorrektur und die Reduktion von Metallartefakten im Zentrum stehen. (orig.)

  20. TALGO BT - a variable gauge diesel driving unit for TALGO trains; TALGO BT - ein Diesel-Triebkopf mit variabler Spurweite fuer TALGO-Zuege

    Energy Technology Data Exchange (ETDEWEB)

    Zander, C.P. [Siemens Krauss-Maffei Lokomotiven GmbH, Muenchen (Germany)

    2000-03-01

    An adjustable driving unit was developed for the variable gauge TALGO trains which have been in use for decades. The unit also has a novel type of carriage and a novel braking system. [German] Fuer die seit Jahrzehnten im Einsatz befindlichen, spurwechselfaehigen TALGO-Zuege wurde ein umspurbarer Triebkopf entwickelt. Dieses Fahrzeug ist in mehrfacher Hinsicht ohne Vorbild. Neu sind neben dem spurveraenderlichen Drehgestell die Fahrwerksanordnung und das Bremssystem. (orig.)

  1. Sustainability and social benefits of the planning of green areas and landscape planning versus their curteilment. Lifestyles as a challenge to, and an opportunity for, economy; Wirtschaft, Wissenschaft und Umwelt. Bd. 7. Nachhaltigkeit und gesellschaftlicher Nutzen von Gruenordnungsplanung und Landschaftsplanung kontra Reduktion. - Lebensstile als Herausforderung und Chance fuer die Wirtschaft

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-11-01

    The book contains the lecture series given within the framework of the 7th Economy Forum ``Economy, science and environment``, organized jointly by the Zentralstelle fuer Forschungs- und Entwicklungstransfer und Wissenschaftliche Weiterbildung (FET and WW) of Essen University and the chamber of industry and trade for Essen, Muelheim/Ruhr and Oberhausen in Essen. The lectures were delivered at the following events at the Essen University: `Sustainability and social benefits of the planning of green areas and landscapes versus their curtailment` (5 June 1997); and `Lifestyles as a challenge to and an opportunity for economy` (13 November 1997). (orig.) [Deutsch] Der Bericht gibt die Vortraege der Veranstaltungsreihe Wirtschaftsforum VII `Wirtschaft, Wissenschaft und Umwelt` wieder, veranstaltet von der FET and WW Zentralstelle fuer Forschungs- und Entwicklungstransfer und Wissenschaftliche Weiterbildung der Universitaet-GH Essen in Zusammenarbeit mit der Industrie- und Handelskammer fuer Essen, Muelheim an der Ruhr, Oberhausen zu Essen. Die Vortraege sind auf folgenden Veranstaltungen an der Universitaet-GH Essen gehalten worden:`Nachhaltigkeit und gesellschaftlicher Nutzen von Gruenordnungsplanung und Landschaftsplanung kontra Reduktion` am 5. Juni 1997 und `Lebensstile als Herausforderung und Chance fuer die Wirtschaft` am 13. November 1997. (orig.)

  2. Hardware-in-the-loop-based development methods for mechatronic light control; Hardware-in-the-loop basierte Entwicklungsmethodik fuer eine mechatronische Leuchtweiteregelung

    Energy Technology Data Exchange (ETDEWEB)

    Opgen-Rhein, P.

    2005-07-01

    A hardware-in-the-loop solution is presented which in the system integration phase takes account of the process of functional property validation of mechatronic light control systems. The method is not tested on the road but on a test rig with defined boundary conditions. This test stand, combined with objective assessment criteria developed for the specific requirements, helps to minimize the number of costly road tests still required. Using the example of an adaptive filter of a light control system, the author shows how filter paramaters are applied on the test stand, and how the subjective judgement of the driver is taken into account as well in the evaluations. (orig.)

  3. Clean air litigation; Klagen fuer Saubere Luft

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2016-11-11

    The pollution of air by nitrogen dioxide (NO{sub 2}) in cities is one of the central challenges of air pollution in Germany, in addition to the pollution of particulate matter (PM10). In cooperation with the British non-governmental organization ClientEarth, the German Environmental Aid (DUH) filed a lawsuit in November 2015 for exceeding air quality limits for NO{sub 2}. The cities of Stuttgart, Frankfurt, Duesseldorf, Essen, Gelsenkirchen, Aachen, Cologne and Bonn are affected. Here, citizens are constantly exposed to high air pollution. Because of the excess of the NO{sub 2} limits at all traffic-related measuring stations in Berlin, the DUH initiated legal steps and filed a lawsuit too in June 2016. With the lawsuits, DUH wants to promote the implementation of measures to reduce NO{sub 2} in Germany. [German] Die Belastung der Luft durch Stickstoffdioxid (NO{sub 2}) in Staedten ist neben der Belastung durch Feinstaub (PM10) eine der zentralen Herausforderungen der Luftreinhaltung in Deutschland. In Zusammenarbeit mit der britischen Nichtregierungsorganisation ClientEarth legte die Deutsche Umwelthilfe (DUH) im November 2015 Klage wegen Ueberschreitung der Luftqualitaetsgrenzwerte fuer NO{sub 2}ein. Betroffen sind die Staedte Stuttgart, Frankfurt, Duesseldorf, Essen, Gelsenkirchen, Aachen, Koeln und Bonn. Hier sind Buergerinnen und Buerger anhaltend zu hoher Luftverschmutzung ausgesetzt. Wegen Ueberschreitung der NO{sub 2}-Grenzwerte an allen verkehrsnahen Messstationen in Berlin hat die DUH im Juni 2016 auch hier rechtliche Schritte eingeleitet und Klage eingereicht. Mit den Klagen will die DUH die Umsetzung von Massnahmen zur NO{sub 2}-Reduktion in Deutschland voranbringen.

  4. Design, construction and experimental investigation of a Stirling refrigerator for freezing in supermarkets. Final report; Auslegung, Bau und experimentelle Untersuchung einer Stirling-Kaeltemaschine fuer die Tiefkuehlung in Supermaerkten. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Steimle, F.; Schikora, H.; Mai, M.; Siegel, A.

    2000-10-01

    Several theoretical investigations have shown that Stirling refrigerators could be a promising alternative for refrigeration at 'near-ambient' temperatures (above -40 C). These theoretical statements shall be validated in an actual research project by measurements taken from a Stirling refrigerator that is optimised for this range of temperature. In this paper first measurement results of this new developed Solo 161 Stirling refrigerator will be presented. Problems are investigated by detailed measurements. Possible improvements are described. (orig.) [German] Verschiedene theoretische Untersuchungen haben gezeigt, dass Stirling-Kaeltemaschinen eine interessante Alternative fuer die Kaelteerzeugung im sog. 'umgebungsnahen' Temperaturbereich (oberhalb von -40 C) darstellen koennten. In einem derzeit laufenden Forschungsvorhaben sollen diese theoretischen Untersuchungen durch Messungen an einer fuer diesen Temperaturbereich optimierten Stirling-Kaeltemaschine ueberprueft werden. In diesem Aufsatz werden erste Messergebnisse dieser neu entwickelten Solo 161 Stirling-Kaeltemaschine praesentiert. Anhand detaillierter Messergebnisse werden Schwachstellen lokalisiert und moegliche Verbesserungsmassnahmen beschrieben. (orig.)

  5. 1981 research programme and budget of Hahn-Meitner-Institut fuer Kernforschung Berlin

    International Nuclear Information System (INIS)

    Anon.

    1981-01-01

    Hahn-Meitner-Institut fuer Kernforschung Berlin (HMI) is one of the twelve large research centers of the Federal Republic of Germany; like the other centers, it has to present a combined research programme and budget (programme budget) every year. In these programme budgets, as in the medium-term financial planning in the federal budget, planning for the current year is combined with a medium-term plan for the three next years. For the year 1981, the budget of HMI includes a total expenditure of about DM 85 million, DM 71.2 million of which are direct R + D expenditures. This R + D programme is carried by 396 of the total staff of 705. Research is done in the following fields (approximate figures): Heavy ion physics DM 23.0 million. Radiation- and photochemistry DM 11.4 million. Solid state research DM 20.9 million. Nuclear chemistry DM 8.9 million. Data processing/electronics DM 7.0 million. (orig./UA) [de

  6. Intelligent robot / manipulator systems for NDT of primary components in nuclear power plants; Intelligente Roboter / Handhabungssysteme fuer die Pruefung von Primaerkreiskomponenten in Kernkraftwerken

    Energy Technology Data Exchange (ETDEWEB)

    Dirauf, F.; Gottfried, R.; Bauer, R. [Siemens AG, KWU, Erlangen (Germany)

    1999-08-01

    The inspection robot developed by Siemens KWU for BWR reactor pressure vessel inspection has a mounting plate with exchangeable parts so as to fit into the various profiles of the vertical guiding tracks at the different pressure vessels. The robot is a versatile device also due to its variable cinematic equipment and thus can be used for any task hitherto performed by the available manipulators. For BWR pressure vessel testing, a novel, compact probe system equipped with five radiation assemblies has been combined with the ultrasonic SAPHIR probe. Until now, NDE of the RPV nozzles in BWRs has been carried out from the outside of the component. The newly developed manipulator of Siemens for inspection of the RPV nozzles can be moved to the nozzles either by manipulating arms or by a floating device, and is fixed to the nozzles by means of pneumatic suckers. Due to the modular design, probe arrays can be exchanged according to nozzle size or structural profiles to be tested. The mobile testing robot SISTAR for PWR pressure vessels consists of a floating cylinder platform that is moved under water to the target position by popellers or by ropes. It is self-adjusting for taking horizontal position and is held in position in the center of the RPV by means of a radial arrangement of legs automatically and synchronously extending from the robot. The platform can be equipped with one or two manipulator arms, depending on the testing task. (orig./CB) [Deutsch] Der von Siemens KWU neuentwickelte Pruefroboter fuer SWR-Reaktordruckbehaelter besitzt einen auswechselbaren Grundwagen, so dass er an die unterschiedlichen Profile der vertikalen Fuehrungsschienen in den einzelnen Kraftwerken angepasst werden kann. Er ist damit auch aufgrund seiner variablen Kinematik universell einsetzbar und kann saemtliche herkoemmliche Manipulatoren ersetzen. In Verbindung mit dem US-Pruefgeraet SAPHIR wurde fuer die SWR-Reaktordruckbehaelter ein neuartiges kompaktes Pruefkopfsystem mit fuenf

  7. Water quality objectives for priority substances aiming at the protection of the aquatic community. Final report; Ableitung von Zielvorgaben fuer prioritaere Stoffe zum Schutz von Oberflaechengewaessern. Endbericht

    Energy Technology Data Exchange (ETDEWEB)

    Herrchen, M.; Mueller, M.; Storm, A.

    2000-03-15

    Zielvorgaben fuer das Schutzgut aquatische Lebensgemeinschaft, welches Zielsetzung des vorliegenden Berichtes ist, wird in der Regel der niedrigste NOEC-Wert fuer die empfindlichste Art aus vier verschiedenen trophischen Ebenen der Biozoenose herangezogen. Liegen die Daten nicht im erforderlichen Umfang vor, so werden Ausgleichsfaktoren eingesetzt, deren Hoehe ihrerseits von der Testdauer, dem betrachteten biologischen Endpunkt und dem Datenumfang abhaengig ist. Im vorliegenden Bericht wurden schwerpunktmaessig Zielvorgaben fuer eine Reihe von Pflanzenschutzmitteln abgeleitet; jedoch wurden auch halogenierte Verbindungen sowie die aktuell diskutierten Nonylphenole und Tributylzinn-Verbindungen betrachtet. Die Datenlage erlaubte fuer insgesamt 11 der 27 behandelten Verbindungen/Stoffgruppen die Ableitung von Zielvorgaben. Datenrecherche- und Bewertungsergebnisse wurden sowohl in Form einer Datenbank (MS-ACCESS), ausgestattet mit einer Schnittstelle zur oekotoxikologischen Schnellauskunft, als auch in Form von Stoffdatenblaettern dokumentiert. (orig.)

  8. Selected examples of online measuring techniques for N and P elimination at sewage treatment plants; Ausgewaehlte Beispiele fuer die Online-Messtechnik zur N- und P-Elimination in Klaeranlagen

    Energy Technology Data Exchange (ETDEWEB)

    Wolffson, C.

    1997-12-31

    More stringent demands on the pollutant concentration of effluents call for stricter self-monitoring and enhanced process control. Devices for measuring ammonium, nitrate and phosphate that suit practical requirements are available. The readings continuously obtained can be additionally used by the control room, within the framework of modern sewage plant process control, for process monitoring. Apart from the financial advantages of saving ventilation energy and chemicals, control loops with continuous measurements are superior in that they enhance the process stability of sewage treatment. (orig.) [Deutsch] Verschaerfte Einleitungsbedingungen erfordern verstaerkte Eigenueberwachung und verbesserte Prozessregelung. Betriebstaugliche Dauermessgeraete fuer Ammonium, Nitrat und Phosphat stehen zur Verfuegung. Die kontinuierlich anfallenden Messwerte koennen im Rahmen der modernen Klaeranlagenleittechnik neben der Prozessregelung zusaetzlich in den Schaltwarten zur Prozessueber-wachung genutzt werden. Neben den Einsparungsmoeglichkeiten fuer Belueftungsenergie und Chemikalien, die einen finanziellen Vorteil bedeuten, liegt der entscheidende Vorzug der Regelkreise mit konti-nuierlichen Messungen in der Verbesserung der Prozessstabilitaet der Abwasserreinigung. (orig.)

  9. Special liquid nitrogen dewar for a superconducting levitation transport system; Spezialkryostat fuer ein supraleitendes Schwebetransportsystem

    Energy Technology Data Exchange (ETDEWEB)

    Schumann, B.; Binneberg, A. [ILK Dresden gGmbH, Dresden (Germany)

    2002-07-01

    Within a joint project supported by the Free State Saxony a novel bearing and transport system was developed. The prototype is based on the combination of the magnetic bearing technique using high temperature-superconductors with a non-contacting linear drive. This non-contracting 'lift' is free from friction and contaminations due to wear and therefore predestinated for applications in clean rooms, e.g. in the microelectronic technology. (orig.) [German] Im Rahmen eines Verbundprojektes, gefoerdert vom Freistaat Sachsen, wurde ein neuartiges Lager- und Transportsystem in Form einer Kombination der supraleitenden Magnetlagertechnik mit Hochtemperatursupraleitern und einem beruehrungslos arbeitenden Linearantriebssystem am Beispiel eines Demonstrators entwickelt. Der voellig beruehrungslos und damit reibungs- und abriebfrei funktionierende Lift ist fuer Anwendungen in Reinraeumen z.B. in der Mikroelektroniktechnologie praedestiniert. (orig.)

  10. 2003 annual meeting of the Deutsche Gesellschaft fuer zerstoerungsfreie Pruefung (DGZfP): NDE in research, development and application

    International Nuclear Information System (INIS)

    2004-01-01

    The annual meeting 2004 of the Deutsche Gesellschaft fuer Zerstoerungsfreie Pruefung e.V. (Berlin, Federal Republic of Germany) was proceeded in Salzburg (Austria) between 17th and 19th May, 2004. The topics of this proceeding are in general all aspects of non-destructive materials testing: repeating tests/inspections, characterization of materials, aerospace, simulation, automobiles, metallic products, optical processes, testing of tubes, testing of acoustic emission, digital radiography, technology of ultrasonic devices, testing of containers, railway, standardization and standards; computer tomography; thermography; special ultrasonic technologies; ultrasonic testing; transmission testing; eddy current testing; surface processes; radiation protection; construction industry; quality assurance

  11. 2007 annual meeting of the Deutsche Gesellschaft fuer Zerstoerungsfreie Pruefung (DGZfP): NDE in research, development and application

    International Nuclear Information System (INIS)

    2007-01-01

    The 2007 annual meeting of Deutsche Gesellschaft fuer Zerstoerungsfreie Pruefung was held at Fuerth in northern Bavaria, a town that had its 1000th anniversary in 2007. Subjects discussed at the conference were new materials, modern technologies, and innovative non-destructive testing. The conference was held close to the ''Technikum Fuerth'' and ''Uferstadt Fuerth'', both of which are centers of research and seats of young, innovative businesses, which gave young scientists an opportunity to present the results of their work and allowed the DGZfPL to present itself to young scientists and to invite discussions. (orig.)

  12. Nanophase hardfaced coatings

    Energy Technology Data Exchange (ETDEWEB)

    Reisgen, U.; Stein, L.; Balashov, B.; Geffers, C. [RWTH Aachen University (Germany). ISF - Welding and Joining Institute

    2009-08-15

    This paper demonstrates the possibility of producing iron or chromium-based nanophase hardfaced coatings by means of common arc welding methods (TIG, PTA). The appropriate composition of the alloys to be deposited allows to control the structural properties and thus also the coating properties of the weld metal. Specific variations of the alloying elements allow also the realisation of a nanostructured solidification of the carbides and borides with cooling rates that are common for arc surfacing processes. The hardfaced coatings, which had been thus produced, showed phase dimensions of approximately 100-300 nm. Based on the results it is established that the influence of the surfacing parameters and of the coating thickness and thus the influence of the heat control on the nanostructuring process is, compared with the influence of the alloy composition, of secondary importance. The generation of nanoscale structures in hardfaced coatings allows the improvement of mechanical properties, wear resistance and corrosion resistance. Potential applications for these types of hardfaced coatings lie, in particular, in the field of cutting tools that are exposed to corrosion and wear. (Abstract Copyright [2009], Wiley Periodicals, Inc.) [German] Diese Arbeit demonstriert die Moeglichkeit zur Herstellung Eisen- und Chrom-basierter nanophasiger Hartauftragschweissschichten mithilfe ueblicher Lichtbogenschweissverfahren (WIG-, Plasma-Pulver-Auftragschweissen - PPA). Eine geeignete Zusammensetzung der aufzutragenden Legierungen ermoeglicht es, die Gefuegeeigenschaften und damit die Schichteigenschaften des Schweissgutes zu kontrollieren. Gezielte Variationen der Legierungselemente erlauben die Realisierung einer nanostrukturierten Erstarrung der Karbide und Boride bei fuer Lichtbogen-Auftragschweissprozessen ueblichen Abkuehlgeschwindigkeiten. In den so erzeugten Hartschichten werden Phasengroessen von ca. 100-300 nm erreicht. Auf Basis der gewonnenen Ergebnisse kann

  13. Recommendations on procedures for renal function imaging; Anleitung zur Durchfuehrung der Nierenfunktionsszintigraphie

    Energy Technology Data Exchange (ETDEWEB)

    Klaeser, B.; Eberl, A.; Bubeck, B. [Klinik fuer Nuklearmedizin, Kantonsspital St. Gallen (Switzerland)

    2003-09-01

    Renal function diagnostics in nuclear medicine is nowadays performed primarily as scintigraphic study using {sup 99m}Tc-MAG3, in many cases accompanied by quantitative clearance measurement. The present recommendations are based on the technical protocols of the Clinic of Nuclear Medicine at the Kantonsspital St. Gallen and do not claim to be complete or the Gold Standard. The procedures described are not subject to discussion, but the authors attempt to give practical guidelines as orientation for users in their daily routine. Focal points are preparation and performance of the diuretic renography with furosemide to evaluate urinary outflow obstructions and scintigraphic studies under captopril for detection of renovascular hypertension. Further subjects are the quantitative clearance measurement according to the single-sample method and, of course, the calculation of the split clearance. All of these subjects are described mainly under practical aspects, looking in particular at frequent pitfalls or wrong interpretations, but also taking into account quality assurance and data analysis. Selected cases are presented to document the importance of renal function imaging in practice. (orig.) [German] Die nuklearmedizinische Nierenfunktionsdiagnostik wird heute vorrangig als Szintigraphie mit {sup 99m}Tc-MAG3 betrieben, haeufig mit begleitender quantitativer Clearancemessung. Die vorliegende Anleitung basiert auf den Untersuchungsprotokollen der Klinik fuer Nuklearmedizin des Kantonsspitals St. Gallen und erhebt weder Anspruch auf Vollstaendigkeit noch darauf, als Goldstandard zu gelten. Die beschriebenen Vorgehensweisen werden nicht diskutiert, sondern die Autoren versuchen, pragmatische Leitlinien zu vermitteln, an denen sich der Anwender in der taeglichen Routine orientieren kann. Schwerpunkte bilden die Vorbereitung und Durchfuehrung der so genannten Lasix-Szintigraphie zur Beurteilung der renalen Abflussverhaeltnisse und die Captopril-Szintigraphie bei der Frage

  14. Preclinical and first clinical experience with the gastrin-releasing peptide receptor-antagonist [⁶⁸Ga]SB3 and PET/CT.

    Science.gov (United States)

    Maina, Theodosia; Bergsma, Hendrik; Kulkarni, Harshad R; Mueller, Dirk; Charalambidis, David; Krenning, Eric P; Nock, Berthold A; de Jong, Marion; Baum, Richard P

    2016-05-01

    Gastrin-releasing peptide receptors (GRPR) represent attractive targets for tumor diagnosis and therapy because of their overexpression in major human cancers. Internalizing GRPR agonists were initially proposed for prolonged lesion retention, but a shift of paradigm to GRPR antagonists has recently been made. Surprisingly, radioantagonists, such as [(99m)Tc]DB1 ((99m)Tc-N4'-DPhe(6),Leu-NHEt(13)]BBN(6-13)), displayed better pharmacokinetics than radioagonists, in addition to their higher inherent biosafety. We introduce here [(68)Ga]SB3, a [(99m)Tc]DB1 mimic-carrying, instead of the (99m)Tc-binding tetraamine, the chelator DOTA for labeling with the PET radiometal (68)Ga. Competition binding assays of SB3 and [(nat)Ga]SB3 were conducted against [(125)I-Tyr(4)]BBN in PC-3 cell membranes. Blood samples collected 5 min postinjection (pi) of the [(67)Ga]SB3 surrogate in mice were analyzed using high-performance liquid chromatography (HPLC) for degradation products. Likewise, biodistribution was performed after injection of [(67)Ga]SB3 (37 kBq, 100 μL, 10 pmol peptide) in severe combined immunodeficiency (SCID) mice bearing PC-3 xenografts. Eventually, [(68)Ga]SB3 (283 ± 91 MBq, 23 ± 7 nmol) was injected into 17 patients with breast (8) and prostate (9) cancer. All patients had disseminated disease and had received previous therapies. PET/CT fusion images were acquired 60-115 min pi. SB3 and [(nat)Ga]SB3 bound to the human GRPR with high affinity (IC50: 4.6 ± 0.5 nM and 1.5 ± 0.3 nM, respectively). [(67)Ga]SB3 displayed good in vivo stability (>85 % intact at 5 min pi). [(67)Ga]SB3 showed high, GRPR-specific and prolonged retention in PC-3 xenografts (33.1 ± 3.9%ID/g at 1 h pi - 27.0 ± 0.9%ID/g at 24 h pi), but much faster clearance from the GRPR-rich pancreas (≈160%ID/g at 1 h pi to <17%ID/g at 24 h pi) in mice. In patients, [(68)Ga]SB3 elicited no adverse effects and clearly visualized cancer lesions. Thus, 4 out of 8 (50 %) breast

  15. Cervical spine injury. Diagnosis, prognosis and management; Trauma der Halswirbelsaeule. Diagnose, Prognose und Management

    Energy Technology Data Exchange (ETDEWEB)

    Schueller-Weidekamm, C. [AKH, Medizinische Universitaet Wien (Austria). Abteilung fuer Neuroradiologie und Muskuloskelettale Radiologie

    2008-05-15

    Cervical spine injuries are a common occurrence in multi-trauma patients and should be taken into account when planning further clinical management. This review describes in detail upper and lower cervical spine injuries and introduces the sub-axial injury classification (SLIC) that is based on three components: injury morphology, integrity of the discoligamentous complex and the neurologic status of the patient. If the total SLIC score is <3, non-surgical treatment is recommended. If the total is {>=}5, operative treatment is indicated as such a score is associated with instability and probably neurologic deficits. The precise diagnosis of the radiologist, which would include the SLIC classification, should facilitate clinical decision-making about further management. (orig.) [German] Halswirbelsaeulenverletzungen sind bei polytraumatisierten Patienten haeufig und sollten beim klinischen Management des Patienten beruecksichtigt werden. Verletzungen der oberen Halswirbelsaeule werden als Sonderformen eingeteilt. Die subaxialen Verletzungen koennen nach der SLIC-Klassifikation ('sub-axial injury classification') gescort werden, die auf der Morphologie der Verletzung, dem diskoligamentaeren Komplex und dem neurologischen Status basiert. Bei einem Score <3 wird ein konservatives Management empfohlen. Bei einem Score {>=}5 sollte eine operative Versorgung der Halswirbelsaeule vorgenommen werden, da die Verletzung eine Instabilitaet und moeglicherweise auch ein neurologisches Defizit verursacht. Anhand einer praezisen Diagnose des Radiologen unter Beruecksichtigung der SLIC-Klassifikation sollte dem Kliniker die Entscheidung fuer das weitere Management erleichtert werden. (orig.)

  16. Agora Energiewende (2016). What do Germany's climate protection goals mean for the brown coal regions? An analysis based on the eleven key points for a coal consensus; Agora Energiewende (2016). Was bedeuten Deutschlands Klimaschutzziele fuer die Braunkohleregionen? Eine Analyse auf Basis der elf Eckpunkte fuer einen Kohlekonsens

    Energy Technology Data Exchange (ETDEWEB)

    Graichen, Patrick; Praetorius, Barbara; Rosenkranz, Gerd; Litz, Philipp

    2016-04-15

    Since Paris's historical climate agreement, it has become clear that from now on energy supply will be discussed worldwide on the premise of decarbonisation. Germany as a traditional coal country and as a land of energy transition can no longer avoid this debate. After all, the climate targets that have been adopted several times for 2030, 2040 and 2050 will ultimately mean the end of coal-fired power generation. In January 2016, Agora Energiewende presented a proposal with the eleven cornerstones for a coal consensus on how such an exit from coal-fired power generation could look like. We are concerned with a cross-party consensus that is broadly anchored in society, which gives all parties involved planning security and reliability and at the same time paves the way for a socially balanced and fairly structured transition to the new energy system. The impacts are particularly relevant for the brown coal regions concerned. In order to make the gradual phasing out of coal-fired power generation socially and economically compatible, special attention must be paid to open-cast brown coal mines and power plants as well as to regional structural change. This publication therefore takes a closer look at precisely these aspects. [German] Seit dem historischen Klimaabkommen von Paris ist klar: Die Energieversorgung wird von nun an weltweit unter der Praemisse der Dekarbonisierung diskutiert. Deutschland als traditionelles Kohleland und als Land der Energiewende kann dieser Debatte nicht laenger ausweichen. Denn die fuer 2030, 2040 und 2050 mehrfach beschlossenen Klimaziele bedeuten letztlich den Ausstieg aus der Kohleverstromung. Agora Energiewende hat im Januar 2016 mit den Elf Eckpunkten fuer einen Kohlekonsens einen Vorschlag vorgelegt, wie ein solcher Ausstieg aus der Kohleverstromung aussehen koennte. Uns geht es um einen parteiuebergreifenden, gesellschaftlich breit verankerten Konsens, der allen Beteiligten Planungssicherheit und Verlaesslichkeit gibt und

  17. Raw materials for the energy supply of the future. Geology, markets, environmental influences; Rohstoffe fuer die Energieversorgung der Zukunft. Geologie, Maerkte, Umwelteinfluesse

    Energy Technology Data Exchange (ETDEWEB)

    Hagelueken, Christian [Umicore, Hanau-Wolfgang (Germany); Thauer, Rudolf K. [Max-Planck-Institut fuer Terrestrische Mikrobiologie, Marburg (Germany); Buchholz, Peter [Bundesanstalt fuer Geowissenschaften und Rohstoffe, Hannover (Germany). Deutsche Rohstoffagentur; Herzig, Peter [GEOMAR Helmholtz-Zentrum fuer Ozeanforschung Kiel (Germany); Gutzmer, Jens [Technische Univ. Bergakademie Freiberg (Germany); Helmholtz-Institut Freiberg fuer Ressourcentechnologie (Germany); Littke, Ralf [Rheinisch-Westfaelische Technische Hochschule (RWTH), Aachen (Germany); Angerer, Gerhard; Wellmer, Friedrich-Wilhelm

    2015-11-15

    More and more metals are needed to expand modern energy technologies, but we can not completely dispense with fossil raw materials and biomass in the near future either. Are the incidence of the conversion of energy sources sufficient? The analysis of the academy project ''Energy Systems of the Future'' (ESYS) comes to the conclusion that geologically enough raw materials are available. The challenge, however, is to make the supply safe, affordable and environmentally and socially compatible. The analysis explains the mechanisms of action on the global commodity markets and identifies supply risks. These include, for example, sudden demand on the international markets as well as the unequal distribution of the world's raw material reserves. This is followed by the analysis approaches, in order to recognize warning signals for potential raw material bottlenecks in time, to develop evasive strategies and to secure the raw material supply for the energy turnarounds. For example, the expansion of recycling can help to reduce the dependence on metal imports. In mining, on the other hand, innovative technologies have to be developed in order to improve the exploration and utilization of the deposits. By establishing binding environmental and social standards, the extraction of raw materials could also become more sustainable. The analysis also highlights the importance of bioenergy and fossil raw materials, such as oil and natural gas, for energy generation. The authors describe the advantages and disadvantages of these energy carriers and the measures that can be used to reduce environmental pollution such as greenhouse gas emissions. [German] Fuer den Ausbau moderner Energietechnologien werden immer mehr Metalle benoetigt, doch auch auf fossile Rohstoffe und Biomasse koennen wir in naher Zukunft nicht vollstaendig verzichten. Reichen die Vorkommen zur Umsetzung der Energiewende aus? Die Analyse des Akademienprojekts &apos

  18. Ultrasound motion tracking for radiation therapy; Ultraschallbewegungstracking fuer die Strahlentherapie

    Energy Technology Data Exchange (ETDEWEB)

    Jenne, J. [Fraunhofer-Institut fuer Bildgestuetzte Medizin MEVIS, Bremen (Germany); Mediri GmbH, Heidelberg (Germany); Schwaab, J. [Mediri GmbH, Heidelberg (Germany)

    2015-11-15

    bzw. -kompensation werden zurzeit untersucht oder schon in der Klinik angewendet. Die Sonographie ist eine vielversprechende Option, die nun kurz vor der klinischen Implementierung steht. Hoher Weichteilkontrast, Echtzeitfaehigkeit, Verzicht auf ionisierende Strahlung sowie relativ geringe Anschaffungskosten zeichnen den Ultraschall besonders fuer diesen Zweck aus. Ultraschallbewegungstracking ist ein bildbasierter Ansatz, d. h. das Zielvolumen oder eine damit verbundene Struktur werden direkt beobachtet und deren Bewegung automatisch auf dem Ultraschallbild nachverfolgt. Diverse Algorithmen stehen derzeit zur Verfuegung, die sowohl aus 2-D- als auch 3-D-Bildern die aktuellen Koordinaten einer Zielstruktur liefern. Die Auswahl eines passenden Schallfensters ist jedoch nicht trivial, und ein Goldstandard fuer die Positionierung und Halterung des Schallkopfs wurde noch nicht erarbeitet. Ausserdem sind die Verarbeitung der Koordinateninformation an der Therapieeinheit sowie die dynamische Anpassung des Strahlfeldes grosse Herausforderungen. Es ist offen, ob sich Ultraschallbewegungstracking in der klinischen Routine etabliert, obwohl alle technischen Voraussetzungen als erfuellt angesehen werden koennen, sodass weiterhin spannende Entwicklungen in diesem Forschungsfeld zu erwarten sind. (orig.)

  19. Bavarian Land Office for Environmental Protection. 1996 annual report and abstracts of publications; Bayerisches Landesamt fuer Umweltschutz. Taetigkeitsbericht 1996 und Kurzbeitraege

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    The annual report informs about the activities of the Bavarian Land Office for Environmental Protection in the following fields: clean air policy, waste management, management of soil pollution and remedial action, nuclear energy and radiation protection, nature conservation and landscape conservation, LfU laboratory, environmental hygiene, and data processing (SR) [Deutsch] Der vorliegende Bericht beschreibt die Taetigkeiten des Bayerischen Landesamtes fuer Umweltschutz auf folgenden Gebieten: Immissionsschutz, Abfallwirtschaft, Altlasten und Bodenschutz, Kernenergie und Strahlenschutz, Naturschutz und Landschaftspflege, Zentrallabors und Umwelthygiene, sowie Datenverarbeitung. (SR)

  20. Bavarian Land Office for Environmental Protection. 1996 annual report and abstracts of publications; Bayerisches Landesamt fuer Umweltschutz. Taetigkeitsbericht 1996 und Kurzbeitraege

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    The annual report informs about the activities of the Bavarian Land Office for Environmental Protection in the following fields: clean air policy, waste management, management of soil pollution and remedial action, nuclear energy and radiation protection, nature conservation and landscape conservation, LfU laboratory, environmental hygiene, and data processing (SR) [Deutsch] Der vorliegende Bericht beschreibt die Taetigkeiten des Bayerischen Landesamtes fuer Umweltschutz auf folgenden Gebieten: Immissionsschutz, Abfallwirtschaft, Altlasten und Bodenschutz, Kernenergie und Strahlenschutz, Naturschutz und Landschaftspflege, Zentrallabors und Umwelthygiene, sowie Datenverarbeitung. (SR)

  1. New approaches for the reliability-oriented structural optimization considering time-variant aspects; Neue Ansaetze fuer die zuverlaessigkeitsorientierte Strukturoptimierung unter Beachtung zeitvarianter Aspekte

    Energy Technology Data Exchange (ETDEWEB)

    Kuschel, N.

    2000-07-01

    Zuverlaessigkeitsmaximierung bei der Beachtung einer Kostenbeschraenkung. Der erweiterte Ansatz eines Mono-Level-Verfahrens wird fuer zeitinvariante Probleme ausfuehrlich vorgestellt, wobei die Zuverlaessigkeit der Tragwerkselemente im Rahmen der Methode erster Ordnung (FORM) analysiert wird. Fuer eine realitaetsnahe Modellierung vieler praktischer Probleme ist die Verwendung zeitvarianter Zuverlaessigkeitsbetrachtungen notwendig, weshalb verschiedene Verallgemeinerungen der neuen Ansaetze fuer die zeitvariante zuverlaessigkeitsorientierte Strukturoptimierung hergeleitet werden. Einige wichtige Eigenschaften der Optimierungsprobleme werden bewiesen. Ferner werden einige interessante Erweiterungen dieses Mono-Level-Verfahrens, zum Beispiel die Kostenoptimierung von Tragwerkssystemen und die Kostenoptimierung im Rahmen der Zuverlaessigkeitsmethode zweiter Ordnung (SORM), angegeben. (orig.)

  2. Marketing strategies and consumer preferences for fertilizers and soils from organic residues of biogas production; Vermarktungsstrategien und Konsumentenpraeferenzen fuer Duenger und Erden aus organischen Reststoffen der Biogasproduktion

    Energy Technology Data Exchange (ETDEWEB)

    Dahlin, Johannes

    2017-07-13

    The aim of this thesis is to show marketing possibilities for fermentation products and to generate sepcific recommendations for potential producers and marketers of fermentation products. Since the marketing of fermenting products is largely unexplored and a research gap, this project was launched with an exploratory phase. After the exploratory phase, private gardeners were identified as a promising customer group. Knowledge about the preferences of private gardeners when purchasing soil and fertilizer are crucial for the market success of processed fermentation products. In order to fathom the decision-making behavior of this potential customer group, personal interviews were conducted with private gardeners. These results enable potential producers and marketers of fermentation products to create a product that is in demand on the market because it meets the needs of potential consumers. The personal preferences, however, can be very different, for which reason a segmentation into different groups with similar preferences is made. [German] Ziel dieser Arbeit ist es, Vermarktungsmoeglichkeiten fuer Gaerprodukte aufzuzeigen und konkrete Empfehlungen fuer potenzielle Hersteller und Vermarkter von Gaerprodukten zu generieren. Da die Vermarktung von Gaerprodukten weitestgehend unerforscht ist und eine Forschungsluecke darstellt, wurde dieses Vorhaben mit einer explorativen Phase gestartet. Nach der explorativen Phase wurden Privatgaertner als vielversprechende Kundengruppe identifiziert. Kenntnisse ueber die Praeferenzen von Privatgaertnern beim Kauf von Erden und Duengern sind entscheidend fuer den Markterfolg von aufbereiteten Gaerprodukten. Um das Entscheidungsverhalten dieser potenziellen Kundengruppe naeher zu ergruenden, wurden persoenliche Interviews mit Privatgaertnern durchgefuehrt. Diese Ergebnisse ermoeglichen es potenziellen Herstellern und Vermarktern von Gaerprodukten ein Produkt zu kreieren, das auf dem Markt nachgefragt wird, da es den Wuenschen der

  3. Operating experience for a closed-circuit interconnected system for flue gas desulphurization at Klingenberg heating power station; Betriebserfahrungen zu einem Kreislaufverbundsystem fuer die Rauchgasentschwefelung im Heizkraftwerk Klingenberg

    Energy Technology Data Exchange (ETDEWEB)

    Hultsch, T [Berliner Kraft- und Licht (BEWAG)-AG, Heizkraftwerk Klingenberg, Berlin (Germany); Mueller, U [BDAG Balcke-Duerr AG, Ratingen (Germany)

    1995-05-01

    The cleaning of flue gases imposes extreme demands on the material concerned. By keeping below the acid dewpoint, this leads to condensation of acid products on the heating surfaces. The correct selection of the appropriate material is decisive for the availability of the overall plant. In the case of the application described in this paper, it has been possible to show that nickel-based alloys are outstandingly suitable for withstanding those kinds of stresses over many years. However, independently of this, it is valid to test material selection for each individual case of application. (orig.) [Deutsch] Die Reinigung von Rauchgasen stellt extreme Anforderungen an den jeweiligen Werkstoff. Durch die Unterschreitung des Saeuretaupunktes kommt es dabei zu einer Kondensation der Saeureprodukte auf den Heizflaechen. Die Auswahl des geeigneten Materials ist entscheidend fuer die Verfuegbarkeit der Gesamtanlage. In dem hier dargestellten Anwendungsfall konnte gezeigt werden, dass Nickelbasis-Legierungen hervorragend geeignet sind, einer derartigen Beanspruchung ueber Jahre hinaus standzuhalten. Unabhaengig hiervon gilt es jedoch, fuer die Materialauswahl jeden Anwendungsfall einzeln zu pruefen. (orig.)

  4. Operators of distribution networks in the competitive markets of electricity and gas; Aufgaben des Netzbetreibers im liberalisierten Energiemarkt. IT-System fuer die Umsetzung der Pflichten des Netzbetreibers

    Energy Technology Data Exchange (ETDEWEB)

    Ohmen, S. [Stadtwerke Aachen AG (Germany)

    2001-02-26

    Stawag (Stadtwerke Aachen AG) is the operator of distribution networks for electricity, gas, water and district heating. In charge of this function Stawag is responsible for the complete handling of the third party access in the competitive markets of electricity and gas. In Germany the development of the background conditions for the third party access have been uncertain. In consequence the IT-market offers up to now no software solution comprehensing all the required functions. Stawag therefore decided to realize and work with an interim solution: Individual IT-systems interconnected by a modern Data-Warehouse platform for data exchange. (orig.) [German] Die Stadtwerke Aachen AG (Stawag) ist ein staedtisches Querverbundunternehmen und hat in der Funktion des Netzbetreibers im liberalisierten Energiemarkt die Aufgabe, die Vereilungsnetze fuer Strom und Gas diskriminierungsfrei allen Marktpartnern zur Verfuegung zu stellen. Bei der Einfuehrung der fuer die Abwicklung dieser Aufgabe erforderlichen IT-Systeme ging die Stawag einen Mittelweg zwischen Kauf und Implementierung einer Komplettloesung und weitgehend manueller Abwicklung mit MS-Office-Produkten. Mit Erfolg - wie die Erfahrungen der letzten Monate zeigen - vorerst auf der Stromseite. (orig.)

  5. Heat tracing with flexible metal hoses. New calculation program for reliable and economic design; Begleitheizung mit flexiblen Metallschlaeuchen. Neues Berechnungsprogramm fuer zuverlaessige und wirtschaftliche Auslegung

    Energy Technology Data Exchange (ETDEWEB)

    Seeger, B. [Witzenmann GmbH, Pforzheim (Germany)

    2003-07-01

    Heat tracing does not only allow the transport of chocolate through pipe systems; particularly in chemical plants it ensures a stable viscosity of the transported media or protects it from freezing. By using flexible metal hoses instead of rigid copper or stainless steel pipes, the installation costs can be reduced considerably. Until now, no verified fundamental design principles or calculation programs for heat tracing with metal hoses were available. However, these are essential for a reliable and economical operation, as well as for a minimisation of the investment costs. Based on extensive field and laboratory measurements, a dedicated calculation model has now been established and verified. (orig.) [German] Begleitheizungen ermoeglichen nicht nur bei Schokolade den Transport durch Rohrleitungen. Vor allem in chemischen Anlagen erhalten sie die Viskositaet der transportierten Medien oder schuetzen gegen Einfrieren. Durch Verwendung von flexiblen Metallschlaeuchen anstelle von Glattrohren aus Kupfer oder Edelstahl laesst sich der Montageaufwand betraechtlich reduzieren. Fuer diese Metallschlauch-Begleitheizungen gab es bisher keine verifizierten Auslegungsgrundlagen oder Berechnungsprogramme. Fuer eine zuverlaessigen und wirtschaftlichen Betrieb sowie eine Minimierung der Investitionskosten sind diese jedoch unerlaesslich. Nun wurde auf der Basis umfangreicher Betriebs- und Labormessungen ein Berechnungsmodell erstellt und verifiziert. (orig.)

  6. Safe and peaceful use of nuclear energy - an IAEA perspective. Address. Deutsche Gesellschaft fuer Auswaertige Politik, Bonn, 17 April 1998

    International Nuclear Information System (INIS)

    ElBaradei, M.

    1998-01-01

    The document reproduces the text of the conference given by the Director General of the IAEA at the Deutsche Gesellschaft fuer Auswaertige Politik in Bonn on 17 April 1998. After a presentation of the Agency's role in the safe and peaceful use of nuclear energy, the conference gives an overview of the main issues facing nuclear energy in the following three major areas: the contribution of nuclear energy to economic and social development, nuclear safety, and verification. In the last part, the Director General makes some comments about the future

  7. Specification of a technically justified limiting value for sulphur concentrations in heating oil in order to enhance the use of high-efficiency boiler technology in oil heating systems; Ermittlung eines technisch begruendeten Grenzwertes fuer Schwefelgehalte im Heizoel zur Foerderung des Einsatzes von Brennwerttechnologie in Oelheizungsanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Bellingen, E.-M.; Kuechen, C. [Institut fuer Wirtschaftliche Oelheizung e.V., Hamburg (Germany); Haase, F.; Wilckens, H. [Deutsche Shell AG, Hamburg (Germany); Sinnen, H.D. [VEBA AG, Duesseldorf (Germany)

    2002-04-01

    Different oil condensing boilers, which were available on the German market, have been investigated in order to determine the relevant limit for sulphur content in domestic heating oil. Up to now, the condensate from oil condensing boilers has to be neutralized in many cases due to local legislation. The composition of the condensates from oil boilers came out to be similar to the condensate from gas condensing boilers, as long as the sulphur content of heating oil is below 100 mg/kg. As the neutralization of condensate from gas condensing boilers is usually not required up to 200 kW-boilers, there should be no technical reason for neutralization, as long as the sulphur content is below 100 mg/kg. However, boiler manufactures are convinced, that only if the sulphur content is as low as 50 mg/kg, it will be possible to develop reliable oil condensing boilers for a reasonable price. Calculations of the total energy consumption came to the result, that primary energy can be saved. The increase of efficiency on the boiler side has more influence than the energy needed for desulphurization. (orig.) [German] Zur Bestimmung eines technisch begruendeten Schwefelgrenzwertes fuer ein neues 'schwefelarmes' Heizoel EL wurden Untersuchungen mit Heizoelen unterschiedlichen Schwefelgehaltes an verschiedenen auf dem Markt verfuegbaren Oelbrennwertgeraeten durchgefuehrt. Zur Zeit wird durch das ATV Arbeitsblatt A-251 eine Neutralisation von Kondensaten aus Oelbrennwertanlagen gefordert. Die Untersuchungen zeigen, dass bei Schwefelgehalten unter 100 mg/kg die Kondensate aehnliche Zusammensetzungen aufweisen wie Kondensate aus Gasbrennwertgeraeten. Die Voraussetzung fuer eine Befreiung von der Neutralisationsverpflichtung bei der Verwendung dieser Brennstoffe ist damit aus technischer Sicht gegeben. Fuer die Entwicklung von neuen, kompakten und preiswerten Oelbrennwertgeraeten wird von der Heizgeraeteindustrie ein Schwefelgehalt von max. 50 mg/kg fuer notwendig gehalten

  8. Digital control of the performance of reciprocating compressors in industrial refrigeration; Digitale Leistungsregelung fuer Hubkolbenverdichter in der Gewerbekaelte

    Energy Technology Data Exchange (ETDEWEB)

    Kaemmer, Norbert; Tomski, Thomas [Emerson Climate Technologies GmbH, Aachen (Germany); Majer, Igor [Emerson Climate Technologies s.r.o., Mikulov (Czech Republic)

    2011-07-01

    During the past few years, digital continuous control has become the primary control concept for scroll compressors. Recently, it has also been applied to reciprocating compressors. This is an interesting alternative to frequency converters and conventional systems and can also be combined with these. In a test facility that simulates a supermarket, various combinations of output-regulated reciprocating compressors were investigated. The refrigeration performance, electric power consumption and other data were recorded for different stationary load states. The experimental set-up, plant parameters and first results are presented in the contribution. Reliable quality data are not available as yet. Intended further investigations and improvements in the experimental set-up are gone into. [German] Im Bereich der Scrollverdichter hat sich in den letzten Jahren bei Verfluessigungssaetzen und kleineren Verbundanlagen die digitale stufenlose Leistungsregelung etabliert. In diesem Segment kann die Technologie ihre Vorzuege, Einfachheit und geringe zusaetzliche installierte Kosten bezogen auf das Gesamtsystem, am Besten ausspielen. Die digitale Regelung ist nun auch fuer Hubkolbenverdichter verfuegbar. Einerseits bietet sie eine interessante Alternative zu Frequenzumrichtern und herkoemmlichen Entlastungssystemen. Andererseits kann sie auch in Kombination mit diesen Technologien eingesetzt werden. In einer Versuchsanlage, die einen Supermarkt simuliert, wurden verschiedene Kombinationsmoeglichkeiten von leistungsgeregelten Hubkolbenverdichtern untersucht. Dazu wurden fuer verschiedene stationaere Lastzustaende die Kaelteleistung, die elektrische Leistungsaufnahme und andere Anlagenwerte erfasst. Die Versuchsanlage, die untersuchten Anlagenparameter und erste Messergebnisse werden dargestellt. Da die Versuchsanlage und der Versuchsbetrieb noch nicht seinen endgueltigen Reifegrad erreicht hat, koennen noch keine verlaesslichen Anlagenguetegrade vorgestellt werden. Es wird

  9. Optimization of environment compatible analysis methods for mineral hydrocarbons in the soil; Optimierung umweltvertraeglicher Analysenverfahren fuer Mineraloelkohlenwasserstoffe im Boden

    Energy Technology Data Exchange (ETDEWEB)

    Flachowsky, J.; Borsdorf, H. [eds.] [UFZ - Umweltforschungszentrum Leipzig-Halle GmbH, Leipzig (Germany); Loehmannsroeben, H.G.; Roch, T. [Erlangen-Nuernberg Univ., Erlangen (Germany); Leopom, P. [Umweltbundesamt, Berlin (Germany); Reimers, C. [Technische Univ. Hamburg-Harburg, Hamburg (Germany); Matz, G.; Kuebler, J. [MOBILAB GmbH, Hamburg (Germany); Christall, B. [SOFIA GmbH, Berlin (Germany); Hahn, M.; Matschiner, H. [Elektrochemie Halle GmbH (Germany); Baermann, A. [Dr. Baermann und Partner Mikroanalytik, Hamburg (Germany)

    1997-12-31

    This paper describes several analytical methods for the quantitative chemical analysis of mineral oil hydrocarbons in soils. The measuring methods are investigated on accuracy, errors, sample preparation methods, analysis of reference materials and real materials. (SR) [Deutsch] Mit dieser Schrift praesentiert die Deutsche Bundesstiftung Umwelt der Oeffentlichkeit Ergebnisse zu alternativen umweltvertraeglichen Bestimmungsmethoden fuer Mineraloelkohlenwasserstoffe in Boeden. Es war in erster Linie das Ziel aller beteiligten Forscher und Entwickler, die heute noch in der Anwendung befindliche Vorschrift nach DIN 38409 H18 zur Analytik von Mineraloelkohlenwasserstoffen durch eine sowohl umweltfreundliche als auch insgesamt aussagekraeftige Methode zu substituieren. (orig.)

  10. Progress report on R + D activities of the Institute fuer Reaktorenentwicklung in 1980

    International Nuclear Information System (INIS)

    1981-02-01

    The Institute fuer Reaktorentwicklung is mostly concerned with technical problems in the development and safety assurance of nuclear facilities. The tasks, some of which are carried out in cooperation with other internal and external institutions, are of a theoretical and experimental nature, most of them in the field of reactor safety. The two main fields are the Projekt Schneller Brueter (PSB) and Projekt Nukleare Sicherheit (PNS). The contributions for PSB, i.e. layout and safety of sodium-cooled fast breeder reactors, refer to investigations of the thermohydraulic and neutron-kinetical response of the core to accidents of very low probability as well as investigations of the effects of local core coling disturbances, with special consideration to possible damage propagation mechanisms and the possibility of detecting these processes. In the field of LWR safety, dynamic loads on core internals have been investigated during the HDR blowdown experiments as well as dynamic loads on containment structures and fuel rod behaviour during LOCA. (orig.) [de

  11. Screening of additives for the production of ice pulp for application in normal cooling and freezing; Screening von Zusatzstoffen zur Herstellung von Eisbrei fuer die NK-/TK-Anwendung

    Energy Technology Data Exchange (ETDEWEB)

    Ruebeling, Jascha; Eiseler, Jens [Hochschule Karlsruhe - Technik und Wirtschaft (Germany). Inst. fuer Kaelte-, Klima- und Umwelttechnik

    2011-07-01

    The project investigated non-toxic additives for production of ice slurry. Ice slurry is an environment-friendly refrigerant that is increasingly used as a substitute for conventional refrigerants. In view of rising energy prices and an impending tax on climate-relevant refrigerants, ice slurry may soon be used for chilling of food in supermarkets. For this, ice slurry of about 0 C is required for normal cooling and of about -25 C for deep freezing. A very fine-grained, pumpable ice slurry is obtained with glucose as an additive, or with sodium chloride in eutectic concentration with small amounts of ethanol for deep freezing. Ethanol will refine the coarse crystal structure of the eutectic sodium chloride / water mixture and will also reduce the freezing point. Further, the method of primary crystallisation on a crystallised additive was developed. An industrial plant working by this principle will have less disturbances and wear during ice slurry production. [German] Die Projektarbeit befasste sich mit der Untersuchung lebensmittelvertraeglicher Additive zur Herstellung von Eisbrei. Eisbrei gilt als umweltfreundlicher Kaeltetraeger, der zunehmend in verschiedenen Bereichen zur Anwendung kommt und herkoemmliche Kaeltemittel ersetzen kann. Aufgrund steigender Energiekosten sowie einer eventuell anstehenden Besteuerung treibhauswirksamer Kaeltemittel, kann Eisbrei zukuenftig zur Kuehlung von Lebensmitteln in Supermaerkten verwendet werden. Dazu wird Eisbrei mit ca. 0 C fuer die Normalkuehlung, beziehungsweise mit ca. -25 C fuer die Tiefkuehlung benoetigt. Mit Glucose als Zusatzstoff laesst sich ein sehr feinkoerniger und damit pumpbarer Eisbrei fuer die Normalkuehlung erzeugen. Bei der Tiefkuehlung ist Natriumchlorid in einer eutektischen Konzentration mit geringen Mengen Ethanol empfehlenswert. Ethanol verfeinert die grobe Kristallstruktur des reinen eutektischen Natriumchlorid-Wasser-Gemisches und senkt den Gefrierpunkt. Des Weiteren wurde das Verfahren der

  12. Spectral responses in near-infrared of the mixed compounds III-V ternary and quaternary, based on GaSb

    Science.gov (United States)

    Mbow, B.; Rezzoug, N.; Peremarti, C.; Mezerreg, A.; Llinares, C.

    1993-09-01

    From the simulation of the spectral response of the different photodetector devices elaborated in our laboratory (C.E.M.), we determine the influence of geometrical and physical parameters in order to achieve the best photodetector operating at the wavelength 2.55 μm. In this paper we present: Gao{0.6}In{0.4}Sbn/Ga{0.6}In{0.4}Sbp homojunctions matched on GaSbp substrate, Ga{0.75}In{0.25}As{0.23}Sbp/GaSbn ternary heterojunction and GaSbp/Ga{0.74}In{0.26}As{0.23}Sb0.77p/GaSbn quaternary heterojunction. The GaSbp layer with an energy band gap greater than Ga{0.74}In{0.26}As{0.23}Sb0.77p optical gap will act as a window, reducing the effect of surface recombinaison. Results of the simulation are compared to experimental curves to determine the values of photoelectrical parameters (diffusion length, recombination velocity at the surface ...). Les mesures de réponse spectrale dans la gamme [0,4 eV à 2 eV] ont été effectuées sur des homojonctions, Ga{0,6}In{0,4}Sbn/Ga{0,6}In{0,4}Sbp déposées sur un substrat de GaSb et des hétérostructures ternaires Ga{0,75}In{0,25}Sbp/GaSbn et quaternaires GaSbp/Ga{0,74}In{0,26}As{0,23}Sb0,77p/GaSbn. La couche de GaSbp avec un gap plus grand que celui de Ga{0,74}In{0,26}As{0,23}Sb0,77p joue le rôle d'effet fenêtre. En s'appuyant sur les résultats de la simulation et en accordant les spectres expérimentaux aux spectres théoriques, on détermine les valeurs des paramètres photoélectriques (longueurs de diffusion, les vitesses de recombinaison en surface ... ) intervenant dans le rendement quantique.

  13. Financial plans for thermal waste treatment plants; Finanzierungsmodelle fuer thermische Abfallbehandlungsanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Soehndel, B. [Zweckverband Restmuellheizkraftwerk, Boeblingen (Germany); Faulstich, M. [Technische Univ. Muenchen, Garching (Germany). Lehrstuhl fuer Wasserguete- und Abfallwirtschaft

    1998-09-01

    There are various financing and organisation models in use at German waste treatment plants. These models have an influence on capital costs as well as on operating costs. The great variety of existing models, which is not only found in theory but also in practice, is a sure indication that there is no universal solution at present but that models always have to be adapted to the current conditions governing the plant in question (e.g., tax law amendments). In view of the great complexity of this subject the following deliberations will be restricted to only the best-known types of financing model. [Deutsch] Fuer den Betrieb von Abfallbehandlungsanlagen gibt es bundesweit verschiedene Organisations- und Finanzierungsmodelle. Diese Modelle haben Auswirkungen auf die Kapitalkosten und die Betriebskosten. Die Vielfalt der nicht nur theoretisch moeglichen, sondern auch der in der Praxis existierenden Modelle ist mit Sicherheit ein Hinweis, dass derzeit keine universelle Loesung moeglich ist, sondern diese immer den aktuellen und spezifischen Verhaeltnissen (z.B. Steuerrechtsaenderung u.a.) angepasst werden muss. Auf Grund der Komplexibilitaet beschraenken sich die nachfolgenden Ausfuehrungen ausschliesslich auf die bekanntesten Formen der Finanzierungsmodelle. (orig./SR)

  14. Analysis of the Structures and Properties of (GaSb)n (n = 4-9) Clusters through Density Functional Theory.

    Science.gov (United States)

    Lu, Qi Liang; Luo, Qi Quan; Huang, Shou Guo; Li, Yi De; Wan, Jian Guo

    2016-07-07

    An optimization strategy combining global semiempirical quantum mechanical search with all-electron density functional theory was adopted to determine the lowest energy structure of (GaSb)n clusters up to n = 9. The growth pattern of the clusters differed from those of previously reported group III-V binary clusters. A cagelike configuration was found for cluster sizes n ≤ 7. The structure of (GaSb)6 deviated from that of other III-V clusters. Competition existed between core-shell and hollow cage structures of (GaSb)7. Novel noncagelike structures were energetically preferred over the cages for the (GaSb)8 and (GaSb)9 clusters. Electronic properties, such as vertical ionization potential, adiabatic electron affinities, HOMO-LUMO gaps, and average on-site charges on Ga or Sb atoms, as well as binding energies, were computed.

  15. Country-wide survey on the effects of emissions using bioindicators. Recommendation of Arbeitskreis ``Bioindikation/Wirkungsermittlung`` der Landesaemter/-anstalten fuer Umweltschutz; Landesweite Erhebung von Immissionswirkungen mit Bioindikatoren. Empfehlung des Arbeitskreises ``Bioindikation/Wirkungsermittlung`` der Landesaemter/-anstalten fuer Umweltschutz

    Energy Technology Data Exchange (ETDEWEB)

    Peichl, L. [Bayerisches Landesamt fuer Umweltschutz, Muenchen (Germany).

    1997-09-01

    The working group on `boindication/assessment of effects` is made up of specialists active in the fields of bioindication and emission ecology for the German Federal administrative offices concerned with the protection of the environment and for the German Environmental Protection Agency. In April 1996, this working group adopted the recommendation for a `country-wide survey on the effects of emissions using bioindicatiors`. The goal of this national survey is to determine the geographic distribution and the development over time of such emissions, as well as to document the effects of background emissions. In order to achieve these goals, the development of national measuring networks and permanent observation stations is mandatory. A minimal demand of investigations and of investigative procedures is required in order to compare the results of the individual Federal States and to consequently combine these findings as an overall picture for the entire Federal Republic of Germany. Mosses and lichens are recommended for passive biological monitoring, while standardized grass cultures, kale, stringing nettle and tobacco are suggested for active biomonitoring. In addition, detailed methodical recommendations concerning the use of standardized grass cultures and kale are discussed. (orig.) [Deutsch] Der Arbeitskreis `Bioindikation/Wirkungsermittlung` setzt sich aus Fachleuten der Bioindikation und Immissionsoekologie der Landesaemter und -anstalten fuer Umweltschutz und des Umweltbundesamtes zusammen. Im April 1996 wurde vom Arbeitskreis die Empfehlung `Landesweite Erhebung von Immissionswirkungen mit Bioindikatoren` verabschiedet. Ziele der landesweiten Erfassung von Immissionswirkungen mit Bioindikatoren sind die Ermittlung ihrer geographischen Verteilung und zeitlichen Entwicklung und der Hintergrund-Immissionswirkungen. Zur Verfolgung dieser Ziele ist die Einrichtung von landesweiten Messnetzen und Dauerbeobachtungsstationen notwendig. Um Untersuchungen der

  16. HGR: Flow models, dust cake and cleaning models for hot flue gas filters. Project part: Design, flow regimes and cleaning of dust cakes at high temperatures. Final report; HGR: Stroemungs-, Filterkuchen- und Abreinigungsmodelle fuer Heissgasfilter. Teilprojekt: Aufbau, Durchstroemung und Abreinigung von Filterkuchen bei hohen Temperaturen. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Hemmer, G.

    1998-12-31

    As separators for the dedusting of hot flue gases from pressurized coal combustion or from product gases of coal gasification there are in principle filtration and centrifugal force and electrical separators. In this project bases shall be determined for methods of interpretation, carcateristic quantities and guide values for the hot gas filtration. As primary sizes for the interpretation to filter plants the pressure drop of dust cakes and filter elements on one hand and the forces necessary for regeneration on the other hand are of fundamental importance. Measurements were carried out at a high temperature filtration unit and at a laboratory filter plant and completed at a high temperature shear cell and a dilatometer. It was shown that the material composition of the dusts has a very decisive influence. Furthermore, the relative humidity has a considerable influence at ambient temperature. Aims of further examinations should therefore be the quantification of the material influences and the meaning of water vapour at high temperatures in order to be able to develop methods of interpretation for hot gas filters. (orig.) [Deutsch] Als Abscheideprinzipien fuer die Entstaubung von heissen Rauchgasen aus der Kohledruckverbrennung oder von Produktgasen aus der Kohlevergasung kommen Filtrations-, Fliehkraft- und elektrische Abscheider in Frage. In diesem Projekt sollen fuer die Heissgasfiltration Grundlagen fuer die Auslegungsmethoden, Kenngroessen und Richtwerte ermittelt werden. Als Primaergroessen fuer die Auslegung von Filteranlagen sind der Druckverlust von Staubkuchen und Filterelement einerseits und die zur Abreinigung noetige Abreinigungsintensitaet andererseits einzuschaetzen. Dabei wurden Messungen an einer Hochtemperaturfiltrationsanlage und einer Laborfilteranlage durchgefuehrt und durch Untersuchungen an einer Hochtemperaturscherzelle und einem Dilatometer ergaenzt. Es zeigte sich, dass die stoffliche Zusammensetzung der Staeube einen sehr entscheidenden

  17. Arbeitsgemeinschaft fuer die Reinhaltung der Elbe - selected organic trace pollutants in the Elbe and its tributaries 1994-1999; Arbeitsgemeinschaft fuer die Reinhaltung der Elbe - Ausgewaehlte organische Spurenverunreinigungen in der Elbe und Elbenebenfluessen im Zeitraum 1994 - 1999

    Energy Technology Data Exchange (ETDEWEB)

    Fooken, C.; Stachel, B.; Reincke, H. [Wasserguetestelle Elbe, Hamburg (Germany)

    2000-10-01

    The present report contains results on the occurrence of polar and nonpolar substances in the Elbe and selected tributaries which were analysed in the period from 1994 to 1999. It shows that industrial and municipal purification plants still have an insufficient cleaning capacity for certain substances. The process by which ubiquitous pollutants can enter the Elbe via a small, widely ramified fluvial system is exemplified for the family of chloroalkyl phosphates. These mainly occur in flame retardants and plasticisers in polyurethanes. The paper also presents results from a selection of 28 substances listed in Directive 76/464/ECC. They provide a decision aid for the planning of future measuring concepts based on the EU Water Framework Directive. In the ARGE ELBE programme organic pollutants are recorded and published on a routine basis. These are mostly nonpolar substances such as the well-known polychlorinated biphenyls or slow-evaporating insecticidal chlorinated hydrocarbons such as DTT. Recent analysis results show that this group of substances is relevant now as before and that it will remain so for the years to come. Special studies involving aqueous phase measurements were performed on a different group of substances, namely polar substances, which are generally readily soluble. The substances on which this report is chiefly focused originate from different sources: industrial and municipal effluents, diffuse inputs from agriculture and atmospheric depositions. In many cases they are difficultly degradable and could attain significance where river water in the form of river bank filtrate is used for drinking water production. However, due to complex and effective purification technologies they rarely enter drinking water. [German] Der vorliegende Bericht enthaelt Ergebnisse zum Vorkommen polarer und unpolarer Stoffe in der Elbe und in ausgewaehlten Nebenfluessen, die in dem Zeitraum von 1994 bis 1999 analysiert worden sind. Er zeigt, dass fuer einzelne

  18. Development of ecological and economical super-insulations for various applications. Subproject 1: scientific development of ecological super-insulations for industrial application. Subproject 2: experimental synthesis and development of a pilot plant for continuously production and realisation of multilayer-insulation materials. Final report; Entwicklung oekologischer und wirtschaftlicher Super-Isolationen fuer vielfaeltige Anwendungen. Teilvorhaben 1: Wissenschaftliche Entwicklung oekologischer Super-Isolationen fuer industrielle Anwendungen. Teilvorhaben 2: Experimentelle Struktursynthese und Entwicklung einer Technikumsanlage zur kontinuierlichen Herstellung von Mehrschicht-Daemmstoffen. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Offermann, P.; Freudenberg, C.; Schenk, A.; Doerfel, A.; Hoffmann, G.; Roedel, H.; Schierz, C.; Hopf, W.

    2002-07-01

    deliverables. A precondition for this is the continued work and the successful combination of the present solutions with new innovative materials. (orig.) [German] Waermedaemmstoffe finden in unterschiedlichen Bereichen, aus denen ihre speziellen Aufgaben resultieren, Anwendung. Materialien wie Daemmstoffe aus Mineralfasern und Schaumkunststoffe werden im Bauwesen und fuer die Industriedaemmung eingesetzt. Waermedaemmstoffe aus natuerlichen Rohstoffen finden, wenn auch nur begrenzt, im Bauwesen Anwendung. Im Bekleidungsbereich werden neben Vliesstoffen aus synthetischen Polymeren oder Schafwolle besonders im out-door-Bereich gestrickte Fleece verwendet. Die Zielstellung des Projektes besteht in der Entwicklung eines Daemmmaterials mit sehr geringer Waermeleitfaehigkeit bei sehr geringer Dichte sowie hohen Freiheitsgraden hinsichtlich der Struktur- und Stoffparameter. Die Umsetzung erfolgt mit dem Verfahren der elektrostatischen Beflockung. Es wird ein Rechenmodell zur Ermittlung optimaler Strukturen hinsichtlich Waermeleitfaehigkeit und Dichte erstellt. Im Anschluss an eine anforderungsgerechte Materialauswahl werden praktische Untersuchungen zur Wirkungsweise des Materials durchgefuehrt. Es wird eine Technikumsanlage zur kontinuierlichen Herstellung des Materials installiert und erprobt. Das Ergebnis des Projektes besteht in einer sehr variablen gestaltbaren Daemmstoffstruktur mit hervorragenden Eigenschaften. Das entwickelte Material wird als Super-Isolations-Flock-Daemmstoff bezeichnet. Bei definierten Strukturbedingungen und entsprechender Materialauswahl koennen Werte fuer die Waermleitfaehigkeit im Bereich von 0,027 W/mK und 0,030 W/mK erreicht werden. Die Dichte fuer derartige Strukturen liegt im Bereich zwischen 10 kg/m{sup 3} und 20 kg/m{sup 3}. Fuer Anwendungsbeispiele ohne hohen mechanische Anforderunge koennen Strukturen mit einer Dichte von ca. 7 kg/m{sup 3} erzielt werden. Der Super-Isolations-Flock-Daemmstoff findet im Bekleidungsbereich sowie im technischen

  19. Electric power in the competitive market - Investing capital for cleaner energy generation still a rewarding business? New perspectives for electrical energy efficiency improvement, the cogeneration technology, and renewable energy generation; Strom im Wettbewerb - Lohnen sich Investitionen in saubere Energien noch? Neue Perspektiven fuer effiziente Stromnutzung, Kraft-Waerme-Kopplung und Erneuerbare Energien. Tagungsband

    Energy Technology Data Exchange (ETDEWEB)

    Schwanhold, E. [comp.

    2000-07-01

    The meeting gathered policymakers, members of the energy industry, the business consulting professions, and scientific institutes and relevant technology companies. New perspectives have been discussed in the context of required framework conditions and processes that have to/can be put in place, or further developed, in order to create a concrete basis or stronger incentives for realisation of climate protection and environmental policy goals in the energy sector. There have been two panel discussions on the issue of whether investing in clean generation technologies will be rewarding. Five papers each presented to these panels have been analysed and prepared for separate retrieval from the database, as well as five papers each of the discussion forum A, ''New perspectives for energy efficiency measures and contracting partnerships'', and the discussion forum B, ''New perspectives for distributed power generation with CHP systems''. From the discussion forum C, ''New perspectives for renewable energy sources'', one paper has been prepared for separate retrieval. (CB) [German] Die Tagung war eine Diskussionsplattform fuer Teilnehmer aus den Bereichen Politik, Energiewirtschaft und wirtschaftsberatende Berufe, Forschungsinstitute und Technologieunternehmen. Neue Perspektiven wurden diskutiert im Zusammenhang mit den Rahmenbedingungen und Moeglichkeiten, die entwickelt oder verstaerkt werden koennen/muessen, um eine konkrete Basis oder staerkere Anreize zur Verwirklichung der Ziele der Klima- und Umweltschutzpolitik in der Energiewirtschaft zu schaffen. Es gab ein Diskussionsforum zur Frage der Wirtschaftlichkeit von Investitionen in saubere Energieerzeugungstechnologien und Energieeffizienz, hiervon wurden 5 Beitraege als Einzelaufnahmen in die Datenbank aufgenommen. Ebenfalls vom Forum A, ''Neue Perspektiven fuer Stromeinsparung und Contracting'', und Forum B, &apos

  20. German S3 guideline for renal cell carcinoma. Presentation and discussion of essential aspects for the radiation oncologist; Die deutsche S3-Leitlinie zum Nierenzellkarzinom. Darstellung und Diskussion wesentlicher Aspekte fuer den Radioonkologen

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, Arndt-Christian [Eberhard Karls University, Department of Radiation Oncology, Tuebingen (Germany); Oorschot, Birgitt van [Julius Maximilians University, Department of Radiation Oncology, Wuerzburg (Germany); Micke, Oliver [Franziskus Hospital Bielefeld, Department of Radiotherapy and Radiation Oncology, Bielefeld (Germany); Guckenberger, Matthias [University of Zurich, Department of Radiation Oncology, Zuerich (Switzerland)

    2018-01-15

    We aim to introduce and discuss the statements and recommendations of the German S3 guideline on renal cell cancer for daily practice of radiation oncologists. This report comprises indication, treatment decision, dose prescription and current literature including treatment of oligometastatic disease. According to different stages of the disease and the structure of the guideline we focus on five treatment situations and recommendations for decision making: (1) Neo-/adjuvant treatment before or after nephrectomy: No indication for radiotherapy. (2) Small renal mass: Stereotactic ablative radiotherapy is currently seen as experimental option due to small patient numbers reported in the literature. However, local tumor control achieved by SBRT appears favourable with >90% at 2 years. (3) Oligometastasis: Radiation treatment with higher local doses or stereotactic treatment is possible after interdisciplinary discussion. Indications for palliative (4) and symptomatic treatment (5) are not different compared to other tumor entities. Currently, there is no evidence-based indication for radiation treatment in the primary setting (adjuvant/neoadjuvant or definitive) of renal cell cancer. In the future stereotactic radiotherapy should have a stronger role in the treatment of medically inoperable patients with primary renal cell cancer and especially in the setting of oligometastasis. (orig.) [German] Ziel dieser Arbeit ist es, dem Radioonkologen die Empfehlungen und Diskussionswege der neuen S3-Leitlinie zum Nierenzellkarzinom fuer die taegliche Praxis pointiert darzustellen. Es werden Indikationsstellung, Dosisverschreibung, technische Durchfuehrung sowie aktuelle Literatur fuer den Strahlentherapeuten, vor allem mit Fokus auf die Behandlung der Oligometastasierung, zusammengefasst. Entsprechend der unterschiedlichen Erkrankungsstadien und der Gliederung der Leitlinie werden fuenf radiotherapeutische Therapiesituationen und die Empfehlungen dazu vorgestellt: (1

  1. Novel, energy-optimized membrane design for biological waste water treatment systems; Ein neuentwickeltes Niedrig-Energie-Membransystem fuer Membran-Biologien

    Energy Technology Data Exchange (ETDEWEB)

    Luebbecke, S. [Preussag Wassertechnik GmbH, Bremen (Germany)

    1999-07-01

    In industrial waste water treatment, circular movement of waste water, scarcity of space for erecting waste water treatment plants, and economy are factors of eminent importance, calling for innovative, efficient process techniques. Up to now, separation of activated sludge from cleaned waste water has been done almost exclusively by means of sedimentation. But because of the slight difference in density between water and biomass, large final sedimentation tanks are indispensable, and attainable biomass concentrations in an activated sludge tank (or bioreactor) are low (3-4g/l). Given that cleaning performance is directly proportional to biomass concentration, achieving higher biomass concentrations spells substantially enhanced efficiency per unit of space of biological systems, thus saving reaction volume. For this task, membrane techniques are suitable, which, contrary to sedimentation, permit random-selection, operationally stable retention and concentration of biomass with a definitely smaller space requirement. (orig.) [German] Bei der industriellen Abwasserbehandlung stehen die Kreislauffuehrung des Abwassers, beengte Platzverhaeltnisse fuer die Errichtung von Abwasserbehandlungsanlagen und die Wirtschaftlichkeit im Vordergrund, so dass dort innovative, effiziente Verfahrenstechniken gefragt sind. Zur Abtrennung des Belebtschlammes vom gereinigten Abwasser wird bisher fast ausschliesslich die Sedimentation eingesetzt. Der geringe Dichteunterschied zwischen Wasser und Biomasse macht jedoch grosse Nachklaerbecken notwendig und die erreichbaren Biomassekonzentrationen im Belebungsbecken (bzw. Bioreaktor) sind gering (3-4 g/l). Da die Reinigungsleistung der Biomassekonzentration direkt proportional ist, kann mit der Einstellung hoeherer Biomassekonzentrationen die Raumumsatzleistung biologischer Systeme erheblich gesteigert und somit Reaktionsvolumen eingespart werden. Fuer diese Aufgabe koennen Membranverfahren eingesetzt werden, die im Gegensatz zur

  2. Stabilisation goals for concentrations of climate-relevant gaseous emissions: Effects and emission pathways. Final report; Stabilisierungsziele fuer Treibhausgaskonzentrationen: Eine Abschaetzung der Auswirkungen und der Emissionspfade. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Onigkeit, J.; Alcamo, J.; Kaspar, F.; Roesch, T.

    2000-04-01

    beruecksichtigt. Neben einer Untersuchung der Reduktionsmassnahmen, die auf globaler Ebene notwendig sind, wurde ein Ansatz entwickelt, um die globalen Reduktionslasten auf Annex B und Nicht-Annex B Laender zu verteilen. Um ein Stabilisierungsziel von 550 ppm CO{sub 2} in der Atmosphaere zu erreichen, duerfen die jaehrlichen globalen anthropogenen CO{sub 2} aequivalenten Emissionen zwar bis 2030 leicht ansteigen, muessen aber bis 2100 auf das Emissionsniveau von 1990 zurueckkehren. Fuer das 450 ppm Ziel ist bis 2100 sogar eine Reduktion auf die Haelfte der Emissionen von 1990 notwendig. Es wurden die Konsequenzen des Klimawandels fuer die landwirtschaftliche Produktivitaet, fuer die natuerliche Vegetation, die Wasserverfuegbarkeit und das Meeresspiegelniveau untersucht. Auch die Auswirkungen regional unterschiedlicher SO{sub 2} Emissionen wurden beruecksichtigt. Trotz umfangreicher Emissionskontrollen ist fuer beide Stabilisierungsziele mit einer schnellen Zunahme der Flaeche mit zurueckgehender landwirtschaftlicher Produktivitaet und mit einer Gefaehrdung der natuerlichen Vegetation zu rechnen. Die Hoehe der Auswirkungen variiert jedoch stark von Region zu Region. (orig.)

  3. Hypoxia imaging with [18F]-FMISO-PET for guided dose escalation with intensity-modulated radiotherapy in head-and-neck cancers

    Energy Technology Data Exchange (ETDEWEB)

    Henriques de Figueiredo, B. [Institut Bergonie, Department of Radiotherapy, Bordeaux (France); INCIA UMR-CNRS 5287, Bordeaux (France); Zacharatou, C. [Institut Bergonie, Department of Radiotherapy, Bordeaux (France); Galland-Girodet, S.; Benech, J. [Hospital Haut-Leveque, Department of Radiotherapy, CHRU Bordeaux (France); Clermont-Gallerande, H. de [Hospital Pellegrin, Department of Nuclear Medicine, CHRU Bordeaux (France); Lamare, F. [INCIA UMR-CNRS 5287, Bordeaux (France); Hospital Haut-Leveque, Department of Radiotherapy, CHRU Bordeaux (France); Hatt, M. [LaTIM INSERM U1101, Brest (France); Digue, L. [Hospital Saint-Andre, Department of Clinical Oncology, CHRU Bordeaux (France); Mones del Pujol, E. de [Department of Oto-rhino-laryngology, CHRU Bordeaux (France); Fernandez, P. [INCIA UMR-CNRS 5287, Bordeaux (France); Hospital Pellegrin, Department of Nuclear Medicine, CHRU Bordeaux (France); University Bordeaux 2, Bordeaux (France)

    2014-09-23

    )-Verfahrens segmentiert. Retrospektiv wurden 2 VMAT-Plaene erstellt, mit 70 Gy auf das CT-basierte GTV (''gross tumour volume'') bzw. 79,8 Gy auf das HV. Durchgefuehrt wurde ein Vergleich der Dosimetrie, basierend auf Berechnungen von TCP (''tumour control probability''), NTCP (''normal tissue complication probability'') fuer die Glandulae (Gl.) parotidis und UTCP (''uncomplicated tumour control probability''). Die mittlere hypoxische Fraktion, definiert als das Verhaeltnis zwischen HV und GTV, betrug 0,18. Die mittlere durchschnittliche Dosis fuer beide Parotiden betrug 22,7 Gy ohne und 25,5 Gy mit Dosissteigerung. Die FMISO-gefuehrte Dosissteigerung ergab einen mittleren Anstieg von TCP, NTCP fuer beide Gl. parotidis und UTCP um 18,1/4,6 bzw. 8 %. Eine [{sup 18}F]-FMISO-PET-gefuehrte Dosissteigerung mit VMAT bis zu 79,8 Gy scheint mit einer Verbesserung der TCP und ohne uebermaessige Erhoehung der NTCP fuer die Gl. parotidis durchfuehrbar zu sein. (orig.)

  4. Structure, design and statistical programme library of the meteorological database of Potsdam-Institut fuer Klimaforschung; Struktur, Aufbau und statistische Programmbibliothek der meteorologischen Datenbank am Potsdam-Institut fuer Klimaforschung

    Energy Technology Data Exchange (ETDEWEB)

    Oesterle, H.; Glauer, J. [Potsdam-Institut fuer Klimafolgenforschung (PIK), Potsdam (Germany); Denhard, M. [Frankfurt Univ. (Germany). Inst. fuer Meteorologie und Geophysik

    1999-01-01

    The relational database management system (ORACLE) using different client interfaces (browser, SQL, precompiler) is the most important basis for data organization and storage. The creation of a data bank system at PIK includes: Acquisition of meteorological data series for the projects executed at PIK; development of a database structure on the basis of daily values; control, analysis and classification of data into given storage formats; development and application of statistical software. There are currently 20 different types of data sets with daily, monthly and annual data which are functionally interconnected and updated. All data sets are continuously updated. (orig.) [Deutsch] Wesentliche Grundlage der Datenorganisation und -speicherung bildet das relationale Datenbanksystem ORACLE mit den dazugehoerigen Werkzeugen (Browser, SQL- und Precompiler). Die Entwicklung des Datenbanksystems am PIK umfasst folgende Etappen: - Erwerb von meteorologischen Datensaetzen fuer die am Institut laufenden Forschungsvorhaben; - Entwicklung einer Speicherstruktur auf der Basis von Tageswerten; - Kontrolle, Analyse und Einordnung der Daten in die vorgegebenen Speicherformate; - Entwicklung der zur Datennutzung notwendigen statistischen Programmbibliothek. Zur Zeit gibt es 20 verschiedene Typen von Datensaetzen. Sie enthalten taegliche, monatliche und jaehrliche Daten und sind funktional miteinander verbunden. Alle Datensaetze werden kontinuierlich erweitert. (orig.)

  5. Energy supply for the town of the future; Energieversorgung fuer die Stadt der Zukunft

    Energy Technology Data Exchange (ETDEWEB)

    Leithner, R. [ed.

    1998-06-01

    Thanks to the development of new energy systems which combine environmentally benign, heavily insulated buildings with renewable energy sources it is possible today to use energy in a responsible manner. This article presents concepts of urban planning and architecture which make use of integral energy systems, techniques for using renewable energy resources such as solar installations, energy supply through biomass and biogas, and the integration of renewable energy resources such as wind power in municipal supply systems and hydrogen as a clean energy source. Ten papers have been abstracted individually for the Energy Database. [Deutsch] Die Entwicklung neuer Energiesysteme, in denen oekologische, hochwaermegedaemmte Baukonstruktionen mit regenerativen Energiequellen kombiniert werden laesst einen verantwortungsvollen Umgang mit Energie zu. Im Folgenden werden dazu Stadtplanung und Architektur im Kontext integraler Energiekonzepte, Techniken zur Nutzung von regenerativen Energietraegern, wie Solaranlagen, Energiebereitstellung durch Biomasse und Biogas, sowie die Integration von regenerativen Energietraegern, z.B. Windenergienutzung im staedtischen Verbund und Wasserstoff als sauberer Energietraeger vorgestellt. Fuer die Datenbank Energy wurden zehn Beitraege einzeln aufgenommen.

  6. Co-operative research for future energy supply; Gemeinsam Forschen fuer die Energie der Zukunft

    Energy Technology Data Exchange (ETDEWEB)

    Stadermann, G.; Szczepanski, P. (comps.)

    2000-10-01

    The FVS ForschungsVerbund Sonnenenergie was founded in 1990 and covers the whole spectrum of solar and renewable energy sources, from solid state physics to agriculture and technology assessment. [German] Seit der Entstehnung des FVS ForschungsVerbund Sonnenenergie haben sich die Rahmenbedingungen fuer die Erforschung der solaren und erneuerbaren Energien verbessert: Sie wurden in den letzten Jahren weiter erschlossen und haben an Bekanntheit und Sympathie gewonnen. Die von der Bundesregierung angestrebte Energiewende bedeutet eine Zaesur in der deutschen Energieversorgung und fuehrt zu einer staerkeren Foerderung erneuerbarer Energien. Sie werden zunehmend als markt- und zukunftsfaehiger Wirtschaftsfaktor wahrgenommen, zu dessen Erschliessung intensive Forschung und Entwicklung notwendig ist. Der Verbund gewinnt daher verstaerkt die Industrie und die Energiewirtschaft als Kooperationspartner im Forschungssektor. Das Themenspektrum im FVS ForschungsVerbund Sonnenenergie umfasst weitgehend alle solaren und erneuerbaren Energien. Diese Themen beinhalten eine Fuelle von einzelnen wissenschaftlichen Problemstellungen von der Festkoerperphysik bis zu agrarwissenschaftlichen Fragen nachwachsender Energierohstoffe und zur Technologiebewertung. (orig.)

  7. Animal husbandry and landscape management in mining landscapes. Literature survey and analysis for the region south of Leipzig; Tiergebundene Landnutzung und Landschaftspflege in Bergbaufolgelandschaften. Literaturuebersicht und Bewertung am Beispiel des Suedraumes Leipzig

    Energy Technology Data Exchange (ETDEWEB)

    Eichler, S.

    1999-07-01

    Testgebiet wurde der Suedraum Leipzig (600 km{sup 2}) ausgewaehlt. Die Untersuchung basierte auf Literaturrecherchen, der Auswertung von Statistiken und Expertenbefragungen. Die Tierhaltung auf Bergbaufolgeflaechen laesst sich in ein ganzheitliches Konzept zur oekologischen Gestaltung von Bergbaufolgelandschaften einfuegen. Dazu steht ein ausreichendes Flaechenpotential mit entsprechenden Pflege- und Entwicklungszielen zur Verfuegung. Der Einsatz auf dauerhaften Kippenflaechen ist zum Erreichen von zwei Zielrichtungen sinnvoll: einerseits Pflegemanagement auf potentiellen Naturschutzflaechen und damit Erhaltung naturschutzfachlich wertvoller Sukzessionsstadien bzw. Offenlandstadien, d.h. spezieller Biotoptypen und/oder Zielarten, bei oekonomischer Nutzbarkeit und andererseits extensive Beweidung von bereits landwirtschaftlich rekultivierten Flaechen, die in Gruenland umgewandelt wurden und damit Aufrechterhaltung der Option fuer die weitere landwirtschaftliche Nutzung und Verbesserung der Naturpotentiale. Darueber hinaus ist die Landschaftspflege auch auf temporaeren gehoelzfreien Klippenarealen wie z.B. Boeschungen praktikabel. In jedem Fall stellt das Nahrungsangebot von Kippenboeden den limitierenden Faktor fuer die tiergebundene Pflege und/oder Nutzung dar und bestimmt das jeweilige Pflegeregime bzw. Weideverfahren. (orig.)

  8. Documentation of the 40th scientific symposium of the Society for Environmental Law e.V., Leipzig 2016; Dokumentation zur 40. wissenschaftlichen Fachtagung der Gesellschaft fuer Umweltrecht e.V. Leipzig 2016

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2017-11-01

    The documentation for the 40th scientific symposium of the Society for Environmental Law (GfU) in November 2016 in Leipzig offers illuminating insights into the state of discussions among German environmental law experts. TThe following focal points were at the centre of the jurisprudence debate: Four decades of immission control law (Prof. Dr. Alexander Schink, Bonn) - Legal problems of change approval (Prof. Dr. Olaf Reidt, Berlin) - Species protection law in the project approval (Judge at the BVerwG Dr. Dr. Ulrike Bick, Leipzig, Dr. Katrin Wulfert, Bochum) - Over-planning of infrastructure on the example of energy route planning (Dr. Tom Pleiner, Berlin) - The Nagoya Protocol and its implementation in the EU and Germany - Background and possible consequences for legal practice (Thomas Ebben, LL.M., Federal Ministry for the Environment, Nature Conservation, Building and Nuclear Safety, Bonn). The conference proceedings contain these articles of the symposium, the summary of the subsequent discussions as well as the contributions of the GfU-Forum, which is aimed especially at young environmental lawyers. [German] Die Dokumentation zur 40. wissenschaftlichen Fachtagung der Gesellschaft fuer Umweltrecht (GfU) im November 2016 in Leipzig bietet aufschlussreiche Einblicke in den Diskussionsstand unter deutschen Umweltrechtsexperten. Im Zentrum der rechtswissenschaftlichen Auseinandersetzung standen folgende Schwerpunkte: Vier Jahrzehnte Immissionsschutzrecht (RA Prof. Dr. Alexander Schink, Bonn) Rechtsprobleme der Aenderungsgenehmigung (RA Prof. Dr. Olaf Reidt, Berlin) Artenschutzrecht in der Vorhabenzulassung (Richterin am BVerwG Dr. Ulrike Bick, Leipzig; Dr.-Ing. Katrin Wulfert, Bochum) Ueberplanung von Infrastruktur am Beispiel energiewirtschaftlicher Streckenplanungen (Dr. Tom Pleiner, Berlin) Das Nagoya-Protokoll und seine Umsetzung in der EU und Deutschland - Hintergruende und moegliche Folgen fuer die Rechtspraxis (Thomas Ebben, LL.M., Bundesministerium fuer

  9. Standards for the secure data interchange in teleradiology put into practice for image and report distribution; Standards fuer den sicheren Datenaustausch in der Teleradiologie am Beispiel der Bild- und Befundverteilung

    Energy Technology Data Exchange (ETDEWEB)

    Eichelberg, M.; Riesmeier, J. [OFFIS e.V., Bereich IuK-Systeme im Gesundheitswesen, Oldenburg (Germany); Thiel, A.; Jensch, P. [Fachbereich Informatik, Carl-von-Ossietzky-Univ., Oldenburg (Germany); Emmel, D.; Haderer, A.; Ricke, J.; Stohlmann, L. [Klinik fuer Strahlenheilkunde, Charite-Campus-Virchow-Klinikum der Humboldt-Univ. zu Berlin (Germany); Bernarding, J. [Medizinische Informatik, Universitaetsklinikum Benjamin Franklin (UKBF), Freie Univ. Berlin (Germany)

    2002-02-01

    The use of telemedicine is becoming indispensable for a continuous and economical delivery of a high quality of care. However, data protection requirements have to be considered. For the selection of solutions, vendor-independent components based on standards are a prerequisite for a seamless integration into the existing, often heterogeneous, IT infrastructure. The ''Internet protocol'' TCP/IP and the DICOM standard with it's new security extensions form the basis for an internationally standardized and accepted procedure for a secure interchange of radiological images beyond platform boundaries. (orig.) [German] Um auch in Zukunft eine kostenguenstige und qualitativ hochwertige Patientenversorgung gewaehrleisten zu koennen, ist der Einsatz von Telemedizin unabdingbar. Dabei sind jedoch immer die Belange des Datenschutzes zu beruecksichtigen. Bei der Auswahl der Loesungen sind herstelleruebergreifende und auf Standards basierende Komponenten Voraussetzung fuer eine nahtlose Integration in die bestehende, oft heterogene EDV-Infrastruktur. Das ''Internetprotokoll'' TCP/IP und der DICOM-Standard mit seinen neuen Sicherheitserweiterungen bilden die Grundlage fuer ein weltweit standardisiertes und akzeptiertes Verfahren zum sicheren Austausch radiologischer Bilddaten ueber Plattformgrenzen hinweg. (orig.)

  10. Postoperative and posttherapeutic changes after primary bone tumors. What's important for radiologists?; Postoperative und posttherapeutische Veraenderungen nach primaeren Knochentumoren. Was ist wichtig fuer den Radiologen

    Energy Technology Data Exchange (ETDEWEB)

    Grieser, T. [Klinikum Augsburg, Klinik fuer Diagnostische und Interventionelle Radiologie und Neuroradiologie, Augsburg (Germany); Noebauer-Huhmann, I.M. [Med. Universitaet Wien, Univ.-Klinik fuer Radiologie und Nuklearmedizin, Wien (Austria)

    2017-11-15

    Posttreatment imaging of primary bone tumours represents a diagnostic challenge for radiologists. Depending on the primary bone tumour common radiological procedures, such as radiography, computed tomography (CT), and magnetic resonance imaging (MRI), are employed. Radiography and CT are particularly useful in benign bone tumours and in matrix-forming bone tumours. MRI comes into consideration with malignant tumour recurrence and tumoral soft tissue infiltration. Bone scintigraphy is of superior importance if a primarily multifocal manifestation of bone tumour or metastasizing tumour disease is suspected. Molecular imaging (FDG-PET and hybrid imaging, using CT) are gaining increasing importance in light of monitoring neoadjuvant chemotherapy and detecting recurrent tumour appearance. The current literature shows sensitivity and specificity values for recurrent detection of up to 92% and 93%. Diagnostic accuracy is as high as 95%, thus, exceeding accuracy values for CT (67%) and MRI (86%) by far. Likewise, this is also applicable for the assessment of the neoadjuvant chemotherapy. Moreover, PET-based modalities are able to establish prognostic statements using SUV-threshold values at baseline (especially for Ewing sarcomas). Advanced imaging techniques have made a great diagnostic step forward and have proven to be relevant and reproducible with respect to both relapse detection and treatment assessment. Furthermore, it is not clear whether a higher detection rate of early tumour recurrence will inevitably lead to better outcome and survival. (orig.) [German] Die posttherapeutische Bildgebung primaerer Knochentumoren stellt eine diagnostische Herausforderung fuer jeden Radiologen dar. In Abhaengigkeit vom primaeren Knochentumor werden zur Nachsorge die gaengigen radiologischen Standardverfahren eingesetzt (Projektionsradiographie, Computertomographie [CT] und Magnetresonanztomographie [MRT]). Die Projektionsradiographie und CT haben einen besonderen Stellenwert v. a

  11. Major Changes in Governmental GAAP.

    Science.gov (United States)

    Piotrowski, Craig L.

    1988-01-01

    The Governmental Accounting Standards Board (GASB) is the standard-setting body for establishing generally accepted accounting principles for school systems and all state and local governments. A brief summary of a statement prepared by GASB's staff outlines the proposed changes in school accounting and financial reporting. (MLF)

  12. A dynamic model for the nitrification of higher concentrated wastewaters and control by experiments; Ein dynamisches Prozessmodell fuer die Nitrifikation hoeher belasteter Abwaesser und praktische Anwendungen

    Energy Technology Data Exchange (ETDEWEB)

    Pirsing, A. [Siemens AG, Anlagentechnik ANL A73, Karlsruhe (Germany); Wiesmann, U. [Inst. fuer Verfahrenstechnik, Technische Univ. Berlin (Germany)

    1995-07-01

    Wastewater with high ammonia concentration is produced by many industries. However, the removal of higher loaded industrial effluents still poses many questions. Dynamic modelling is helpful to understand the process of nitrification and to investigate algorithms of process control. Therefore, a dynamic model of nitrification in completely mixed reactors is proposed based on mass balances for the components ammonia, nitrite, nitrate, dissolved oxygen, carbon dioxide, pH, nitrosomonas and nitrobacter. The biological reaction rates consider oxygen limitation and substrate inhibition. The process model presented it tested by lab scale experiments using an aerated stirred tank reactor. (orig.) [Deutsch] Es wird ein mathematisches Prozessmodell fuer die Nitrifikation von Industrieabwaessern mit hoher Ammoniumkonzentration vorgestellt, das bislang vernachlaessigte Phaenomene wie z.B. Substratueberschusshemmung und Sauerstofflimitierung beruecksichtigt. Als theoretische Grundlage dienen Bilanzgleichungen fuer insgesamt acht Komponenten. Das Simulationsmodell wird durch den Vergleich mit experimentellen Ergebnissen aus einer Laborversuchsanlage auf seine Richtigkeit ueberprueft. In dem Beitrag werden auf diesem Modell basierende Anwendungsbeispiele behandelt. So werden die Moeglichkeiten der dynamischen Prozesssimulation zur Steigerung der Betriebsstabilitaet bei schwankenden Zulaufkonzentrationen und -volumenstroemen gezeigt. Darueber hinaus gelingt die Rekonstruktion der Umsatzraten r(O{sub 2}) und r(NH{sub 3}) aus der Sauerstoff- und Kohlendioxidkonzentration in der Abluft. (orig.)

  13. Market monitoring. Globalization of professional education for engineers. Chances and market potentials of German sellers; Marktsondierung. Internationalisierung beruflicher Weiterbildung fuer Ingenieure. Chancen und Marktpotenziale deutscher Anbieter

    Energy Technology Data Exchange (ETDEWEB)

    Luther, W.; Baron, W.; Zweck, A.

    2002-09-01

    A market monitoring study was carried to determine which countries and which business fields offer opportunities for developing promising activities. The results of the market monitoring study, which was carried out by the VDI Technology Centre, will also be made available to other interested training institutions with a view to promoting the globalisation of professional education for engineers. The following countries were included in the study: USA, Belgium, France, Great Britain, Ireland, the Netherlands, Sweden, and Spain. The study focused chiefly on technically specialised staff and executives. As regards products and services the main focus is on training events with a short runtime and areas where there is a strong interest in the globalisation of training providers. [German] Mittels einer Marktsondierung wurde untersucht, in welchen Laendern und in welchen Geschaeftsfeldern aussichtsreiche Aktivitaeten entfaltet werden koennen. Die Ergebnisse dieser Marktuntersuchung des VDI-Technologiezentrums werden auch weiteren interessierten Weiterbildungseinrichtungen zur Verfuegung gestellt, um auf diese Weise einen Beitrag zur staerkeren Internationalisierung beruflicher Weiterbildung fuer Ingenieure zu leisten. Die Studie analysiert folgende Ziellaender: USA, Belgien, Frankreich, Grossbritannien, Irland, Niederlande, Schweden und Spanien. Als Zielgruppe werden technische Fach- und Fuehrungskraefte fokussiert. Als moegliche Produkte und Dienstleistungen stehen Veranstaltungen mit relativ kurzer Laufzeit und Handlungsfelder im Vordergrund, die fuer eine Internationalisierung der Weiterbildungsanbieter von besonderem Interesse sind. (orig.)

  14. Comparative discussion of the activated sludge and packed bed techniques in biological sewage water cleaning; Vergleichende Betrachtung von Belebungs- und Festbettverfahren fuer die biologische Abwasserreinigung

    Energy Technology Data Exchange (ETDEWEB)

    Kroiss, H [Technische Univ., Vienna (Germany). Inst. fuer Wasserguete und Abfallwirtschaft

    1994-12-31

    It is reasonable to state that, given proper planning, erection and careful operation, both activated sludge plants and packed bed reactors with a biofilm are capable of meeting extremely high demands on the quality of the effluent. What was to be shown is the fact that operating behaviour and demands on measurement and control techniques differ considerably. Rating depends on different criteria, according to the technique chosen, and also cost calculation is largely determined in each case by special local conditions. All this makes it difficult to compare solutions with one another or to transfer experience gathered in one plant to another application. So the choice of the best possible method in a given case remains an interesting task.- One must try to make as objective a comparison as possible of different solutions according to the relevant criteria, beyond what is quantifiable merely in terms of finance.- Any decision taken on the basis of such a comparison is bound to reflect also the values that the decision-makers hold. But it should always be possible when taking decisions about processes to leave ideology out of consideration. (orig.) [Deutsch] Es kann festgestellt werden, dass sowohl Belebungsanlagen wie auch Biofilmreaktoren bei richtiger Planung, Errichtung und sorgfaeltigem Betrieb in der Lage sind, auch extrem hohe Ansprueche an die Ablaufguete zu erfuellen. Was gezeigt werden sollte, ist der Umstand, dass erhebliche Unterschiede im Betriebsverhalten und in den Anforderungen an die Mess- und Regeltechnik bestehen. Fuer die Bemessung sind je nach Verfahren andere Kriterien massgebend, und auch fuer die Kostenrechnung gilt, dass die speziellen oertlichen Bedingung bei jedem Anwendungsfall von ausschlaggebender Bedeutung sind. Das alles hat zur Folge, dass es sehr schwierig ist, verschiedene Loesungsmoeglichkeiten miteinander zur vergleichen, oder die Erfahrung von einer Anlage auf einen anderen Anwendungsfall zu uebertragen. Die Auswahl des ``besten

  15. Impairment no setor público: particularidades das normas nacionais e internacionais Impairment in the public sector: particularities of Brazilian and international standards

    Directory of Open Access Journals (Sweden)

    Luiz Nelson Guedes de Carvalho

    2010-08-01

    Full Text Available O impairment no setor público tem sido pouco discutido no meio acadêmico. Os órgãos normatizadores têm publicado pronunciamentos sobre o assunto, enquanto muitas dúvidas surgem e permanecem sem resposta. Diante disso, este artigo analisa as particularidades de normas nacionais e internacionais balizadoras do impairment no setor público: o Gasb 42, os Ipsas 21 e 26 e a NBC T 16.10. Foram analisados aspectos relacionados ao conceito de impairment, à periodicidade de aplicação do teste, para quais ativos deve ser aplicado e o processo de reconhecimento, mensuração e evidenciação da perda por impairment. As principais divergências entre os pronunciamentos são: o Gasb 42 está baseado em princípios e não em regras; os critérios utilizados pelo Gasb 42 para cálculo do fair value são semelhantes àqueles usados pelos Ipsas 21 e 26 para cálculo do valor em uso; o valor de reposição é usado para cálculo do fair value no Gasb 42 e o valor de saída nos Ipsas; apenas o Ipsas 26 utiliza a figura da unidade geradora de caixa; o Gasb 42 não admite a reversão da perda por impairment e os Ipsas não se aplicam a bens reavaliados. Apesar da NBC T 16.10 já estar em vigor no Brasil, todos os ativos públicos e a depreciação precisam ser reconhecidos e mensurados antes da aplicação dessa normaLittle discussion on impairment in the public sector has occurred in the academic context. Standardizing bodies have published pronouncements on this issue, but many doubts arise and remain unanswered. This article analyzes the particularities of Brazilian and international standards guiding impairment in the public sector: Gasb 42, Ipsas 21 and 26 and NBC T 16.10. The aspects analyzed were related to the impairment concept, the periodicity of applying the test, what assets it should be applied to and the recognition, measurement and disclosure process of impairment loss. The main divergences between the pronouncements are: Gasb 42 is based on

  16. Diagnostics of vascular diseases as a cause for acute abdomen; Diagnostik vaskulaerer Erkrankungen als Ursache fuer das akute Abdomen

    Energy Technology Data Exchange (ETDEWEB)

    Juchems, M.S. [Universitaetsklinikum Ulm, Klinik fuer Diagnostische und Interventionelle Radiologie, Ulm (Germany); Aschoff, A.J. [Klinikum Kempten-Oberallgaeu, Abteilung fuer Radiologie, Kempten (Germany)

    2010-03-15

    Vascular pathologies are rare causes of an acute abdomen. If the cause is a vascular disease a rapid diagnosis is desired as vascular pathologies are associated with high mortality. A differentiation must be made between arterial and venous diseases. An occlusion of the superior mesenteric artery is the most common reason for acute mesenteric ischemia but intra-abdominal arterial bleeding is also of great importance. Venous pathologies include thrombotic occlusion of the portal vein, the mesenteric vein and the vena cava. Multi-detector computed tomography (MDCT) is predestined for the diagnostics of vascular diseases of the abdomen. Using multiphasic contrast protocols enables reliable imaging of the arterial and venous vessel tree and detection of disorders with high sensitivity and specificity. Although conventional angiography has been almost completely replaced by MDCT as a diagnostic tool, it is still of high importance for minimally invasive interventions, for example in the management of gastrointestinal bleeding. (orig.) [German] Vaskulaere Pathologien sind seltene Ursachen fuer den klinischen Zustand eines akuten Abdomens. Liegt eine vaskulaere Erkrankung vor, ist jedoch aufgrund der hohen Mortalitaet eine zuegige Diagnostik von grosser Wichtigkeit. Bei den Erkrankungen der abdominellen Gefaesse sind arterielle von venoesen Ursachen zu unterscheiden. Ein Verschluss der A. mesenterica superior ist die haeufigste Ursache fuer die akute Mesenterialischaemie, daneben sind Blutungen in den abdominellen Gefaessprovinzen des arteriellen Gefaessbaums von Bedeutung. Venoese Pathologien betreffen thrombotische Verschluesse der Pfortader, der V. mesenterica und der V. cava. Die Multidetektor-CT (MDCT) ist zur Diagnostik vaskulaerer Erkrankungen des Abdominalraums praedestiniert. Mit mehrphasigen Untersuchungsprotokollen gelingt es, den arteriellen und venoesen Gefaessbaum zuverlaessig darzustellen und Erkrankungen mit hoher Sensitivitaet und Spezifitaet zu

  17. Fuel cells for the electricity supply of plants remote from the grid; Brennstoffzellen fuer die Elektrizitaetsversorgung von netzfernen Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Ledjeff, K

    1996-12-31

    The solar house at Freiburg, which is independent for energy, obtains all its energy only from the radiation impinging on the outside of the building. The space heating, provision of hot water, energy for cooking and electricity are provided by conversion of solar energy. A photo-electric generator supplies electricity which, apart from direct consumption, can be stored in a lead battery and the hydrogen system. The hydrogen system is the last link in the chain of the energy converter and represents the only energy supply if the thermal and electrical systems cannot any longer be supplied by the sun. The hydrogen system must therefore cover the energy demand in winter, consisting of a small heater for space heating and of course the fuel cell for providing electricity. The ideal fuel cell system for the solar house, which is independent for energy, is the PEMFC with an output of 500 W-1 kW. (orig./MM) [Deutsch] Das Energieautarke Solarhaus in Freiburg bezieht die gesamte Energie nur aus der auf die Gebaeudehuelle auftreffende Strahlung. Die Raumheizung, die Warmwasserbereitung, die Energie zum Kochen und der elektrische Strom werden durch die Umwandlung von Sonnenenergie bereitgestellt. Ein Photovoltaik-Generator liefert elektrische Energie, die neben dem direkten Verbrauch in eine Bleibatterie und das Wasserstoffsystem zur Speicherung eingespeist werden kann. Die Wasserstoffspeicherung erfolgt als Gas bei einem Druck von 30 bar. Das Wasserstoffsystem ist das letzte Glied in der Kette der Energiewandler und stellt den einzigen Energievorrat dar, wenn die thermischen und elektrischen Systeme nicht mehr solar versorgt werden koennen. Das Wasserstoffsystem muss daher den Energiebedarf im Winter decken, das sich ein kleiner Nachheizer fuer die Raumheizung und natuerlich die Brennstoffzelle zur Bereitstellung elektrischer Energie. Das ideale Brennstoffzellensystem fuer das Energieautarke Solarhaus ist die PEMFC mit einer Leistung von 500 W-1 kW. (orig./MM)

  18. Radiation protection and communication of information. 21. Annual meeting of the French association ATSR; Strahlenschutz und Kommunikation. 21. Jahrestagung der franzoesischen Vereinigung fuer Technik und Wissenschaft im Strahlenschutz (ATSR)

    Energy Technology Data Exchange (ETDEWEB)

    Hoefert, M. [CERN, Geneva (Switzerland)

    2001-07-01

    The conference report presents a brief summary of papers and discussion topics. (orig./CB) [German] Die 21. Jahrestagung der ATSR fand dieses Jahr unter dem Motto 'Strahlenschutz und Kommunikation' im herbstlich sonnigen Aix en Provence statt. Die ATSR ist neben der Franzoesischen Gesellschaft fuer Strahlenschutz (SFR) eine zweite Standesorganisation, in der sich praktisch arbeitende Strahlenschutzverantwortliche in Frankreich organisiert haben. (orig.)

  19. Development of service-relevant materials data and economic quality assurance and machining procedures for gas turbine blades. Final report; Entwicklung betriebsrelevanter Werkstoffkennwerte und wirtschaftlicher Qualitaetssicherungs- und Bearbeitungsverfahren fuer GT-Schaufeln. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Buergel, R.; Rechtenbacher, H.

    1994-01-01

    In the frame of the reported project, together with the programme partners, optimization of service relevant properties as well as modification of manufacturing procedures for the forged alloy Nimonic 101 were achieved. These results are directly implementable into serial production and cause improved service reliability and economic benefit. For the forged alloy Udimet 720 materials data were generated in accordance with the programme plan. The final evaluation for this alloy will be performed by the project partner Siemens-KWU. The qualification of fine-grained investment cast blades of IN 792 for large rear=stage blading is not yet fully completed. Three major questions are lacking final answers: - Does a stress rupture strength advantage exist over the forged alloy Udimet 720/coarse/grained? - Can a high cycle fatigue strength as high as that for Udimet 720/coarse-grained be met reproducibly? - Does the investment cast blades offer a cost advantage over the forged ones - technical qualification assumed? The programme helped significantly in preparing the right answers to these questions. (orig.) [Deutsch] Im Rahmen des berichteten Teilvorhabens ist es in Zusammenarbeit mit den Projektpartnern gelungen, fuer die Schmiedelegierung Nimonic 101 die betriebsrelevanten Eigenschaften zu optimieren, sowie die Schaufelherstellung so zu modifizieren, dass die Betriebszuverlaessigkeit verbessert wird. Diese Ergebnisse sind direkt in die Serienfertigung implementierbar und damit wirtschaftlich nutzbar. Fuer die Schmiedelegierung Udimet 720 wurden im Rahmen des Projektverbundes Werkstoffkennwerte ermittelt. Die Gesamtauswertung fuer diesen Werkstoff erfolgt von Projektpartner Siemens-KWU. Das Bild zur Qualifikation feinkoerniger Feingussschaufeln ist noch nicht restlos klar. Drei wesentliche, noch abschliessend zu beantwortende Fragen sind: - Ergibt sich ein Zeitstandfestigkeitsvorteil gegenueber der Schmiedelegierung Udimet 720/Grobkorn? - Laesst sich reproduzierbar eine

  20. Climate to measure. Facility management for Universal Music at Berlin; Klima nach Mass. TGA-Planung fuer Universal Music in Berlin

    Energy Technology Data Exchange (ETDEWEB)

    McLead, E.A.

    2002-07-01

    Designing and constructing the technical facilities for a historical building like the 'Spreespeicher' in Berlin is a difficult but interesting task. The building is owned by Universal Music. Each department has its own office structure, and all offices and structures were integrated in a functional overall concept by the planners of Happold Ingenieure. [German] Klima, Lueftung und Elektroinstallation fuer ein historisches Gebaeude wie den Berliner Spreespeicher zu entwickeln, ist eine schwierige, aber reizvolle Aufgabe. Besonders, wenn der Nutzer Universal Music heisst: Jede Abteilung besitzt ihre eigene Buerostruktur, und alle mussten die TGA-Planer von Happold Ingenieure in ein funktionierendes Gesamtkonzept integrieren. (orig.)

  1. Geothermal heat for Erding. 2. Energy and wellness, geothermal heating station and hot-water indoor swimming pool; Geowaerme fuer Erding 2. Energie und Wellness, Geothermieheizwerk und Thermalbad

    Energy Technology Data Exchange (ETDEWEB)

    Tenzer, H. (comp.); Bussmann, W.

    1999-07-01

    This 17:20 minute VHS-PAL video film describes the project 'Geothermal heat for Erding 2', i.e. the construction of the geothermal heating station and a modern hot-water indoor swimming pool. [German] Der vorliegende VHS-PAL-Videofilm beschreibt innerhalb von 17:20 Min. Lauflaenge das Projekt 'Geowaerme fuer Erding 2'. Gezeigt werden die Entstehungsphasen dieses Projektes bestehend aus einem Geothermieheizwerk und einem modernen Thermalbad. (AKF)

  2. Using continuous UV extinction measurements to monitor and control the aerated phase of sequencing batch reactors; Einsatz der kontinuierlichen UV-Extinktionsmessung fuer die Ueberwachung und Regelung der Belueftungsphase in SBR-Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Nicolet, L.; Rott, U. [Stuttgart Univ. (Germany). Inst. fuer Siedlungswasserbau, Wasserguete- und Abfallwirtschaft; Bardeck, S. [Optek-Danulat GmbH (Germany)

    1999-07-01

    The work describes the measurement of UV extinction - expressed as the spectral absorption coefficient SAC - at a randomly chosen wave length as a technique for monitoring organic load in effluents from sequencing batch reactors (SBR) at municipal and industrial waste water treatment plants. Further described is to what extent the continuous determination of the SAC can be used in practice for the control of the aerated phase of sequencing batch reactors. By this means, process stabilization and optimization can be achieved and operating reliability can be enhanced. (orig.) [German] Inhalt dieses Beitrages ist es, die Messung der UV-Extinktion - ausgedrueckt durch den spektralen Absorptionskoeffizient (SAK) - bei einer frei gewaehlten Wellenlaenge als Verfahren fuer die Ueberwachung der organischen Belastung in den Ablaeufen von SBR-Anlagen (Sequencing-Batch-Reactor) in der kommunalen und industriellen Abwasserreinigung vorzustellen. Weiterhin soll dargestellt werden, in wieweit die kontinuierliche Bestimmung des SAK in der Praxis fuer die Regelung der beluefteten Phase von SBR-Anlagen eingesetzt werden kann. Hiermit kann eine Prozessstabilisierung und -optimierung der Anlagen erreicht sowie die Betriebssicherheit erhoeht werden. (orig.)

  3. Consequences of the amended Biomass Waste Ordinance for biological waste treatment; Konsequenzen der novellierten Bioabfallverordnung fuer die biologische Abfallbehandlung

    Energy Technology Data Exchange (ETDEWEB)

    Kehres, Bertram [Bundesguetegemeinschaft Kompost e.V. (BGK), Koeln (Germany)

    2012-11-01

    The amended Biomass Waste Ordinance will bring about changes in biological waste treatment to which operators of composting and fermenting plants will have to adapt. The contribution outlines the most relevant changes; at the time of publication, it was not known how the Bundesrat would decide with regard to the Amendment, probably in late March 2012. (orig.) [German] Die Novelle der Bioabfallverordnung wird fuer die biologische Abfallbehandlung verschiedene Veraenderungen mit sich bringen, auf die sich Betreiber von Kompostierungs- und von Vergaerungsanlagen einzustellen haben. Auf die wesentlichen Aenderungen wird in diesem Beitrag eingegangen. Zum Zeitpunkt der Abfassung dieses Beitrages ist allerdings noch nicht vollstaendig bekannt, wie der Bundesrat - voraussichtlich Ende Maerz 2012 - ueber die Novelle abschliessend entscheiden wird. (orig.)

  4. Achievement in research on ion beam application under the scientific cooperation program with the Gesellschaft fuer schwerionenforschung mbH

    Energy Technology Data Exchange (ETDEWEB)

    Yoshida, Masaru; Maekawa, Yasunari (eds.) [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment

    2003-03-01

    The Japan Atomic Energy Research Institute (JAERI) and the Gasellshaft fuer Schwerionenforshung mbH (GSI) signed a memorandum of 'Research and Development in the Field of Ion Beam Application' in January, 1991 and started the cooperative research program. The cooperation has been implemented by means of joint research between JAERI and GSI, exchange of scientific and technical experts, and providing mutual exchange of research materials as well as technical information. This report summarizes the cooperative research activities under the cooperative research program in the last 12 years. The list of publications and several articles relating to this cooperative research program are attached as an appendix. All the attached articles are reprinted with permission from the publishers. (author)

  5. InterCity tilting e.m.u. for Deutsche Bahn; InterCity-Triebzuege mit Neigetechnik fuer die Deutsche Bahn

    Energy Technology Data Exchange (ETDEWEB)

    Behmann, U.

    1999-07-01

    When changing time schedule in the end of may 1999 the German Railway (DB) starts with a new generation of electric intercity trains for 1 AC 15 kV 16 2/3 Hz. Five trains with tilt mechanism will travel between Stuttgart - Singen - Schaffhausen - Zurich. For this purpose these trains are equipped in addition with swiss current collectors and safety engineering. [German] Zum Fahrplanwechsel Ende Mai 1999 wird die Deutsche Bahn (DB) mit einer neuen Generation elektrischer InterCity-Triebzuege fuer 1 AC 15 kV 16 2/3 Hz in den kommerziellen Dienst gehen. Mit fuenf Zuegen Baureihe (BR) 415 mit Neigetechnik (ICT) wird sie die Relation Stuttgart - Singen - Schaffhausen - Zuerich bedienen. Dafuer wurden diese fuenf Zuege zusaetzlich mit schweizerischer Stromabnehmerwippe und Zugsicherungseinrichtung ausgeruestet. (orig/GL)

  6. Investigation of a matrix converter for contactless power transmission systems; Untersuchung eines Matrixumrichters fuer kontaktlose Energieuebertragungssysteme

    Energy Technology Data Exchange (ETDEWEB)

    Ecklebe, Andreas

    2009-05-22

    Arbeit beschaeftigt sich mit einem drei- zu zweiphasigen Matrixumrichter zur Speisung von kontaktlosen Energieuebertragungssystemen. Aufbauend auf einer Darlegung relevanter Untersuchungen zur Thematik werden zunaechst moegliche Resonanzanordnungen fuer kontaktlose Energieuebertragungssysteme untersucht. Die Betrachtung wichtiger elektrischer Parameter zeigt neben den Unterschieden der einzelnen Anordnungen auch, dass fuer eine auf den speisenden Umrichter fokussierte Untersuchung eine einfache Modellierung der drei untersuchten Resonanzanordnungen mit Hilfe eines Reihenschwingkreises moeglich ist. Als Konsequenz ergibt sich die Schlussfolgerung, dass sich die erzielten Ergebnisse auch fuer den Matrixumrichter mit anderen serienresonanten Lasten anwenden lassen. Der zweite Teil der Arbeit ist der Untersuchung des Matrixumrichters gewidmet. Basierend auf einer theoretischen Beschreibung wird die Kombination von hochfrequenten Steuerverfahren - wie z.B. der Blocktaktung - und niederfrequenten Pulsmustern zur Stellung des Oberschwingungsgehalts der Netzstroeme vorgestellt. Die Aehnlichkeit des Umrichters zu einem konventionellen Wechselrichter in H-Brueckenschaltung ermoeglicht anschliessend eine Betrachtung der Kommutierung und die Ableitung notwendiger Schaltzustaende. Diese sind dadurch gekennzeichnet, dass zu jedem Zeitpunkt genau eine bidirektionale Verbindung vom Eingangssystem zu jeder Ausgangsphase besteht. Die Funktionsweise der Kommutierung wie auch des gesamten Umrichters wird in einem ersten Schritt simulativ belegt. Dabei wird auch das dynamische Schaltverhalten der Leistungshalbleiter beruecksichtigt. Anschliessend werden an einem Laboraufbau aufgenommene Messergebnisse vorgestellt und mit den theoretischen Ergebnissen verglichen. Der Laboraufbau besteht aus dem Leistungsteil des Matrixumrichters mit Eingangsfiltern und modularen Gate-Treibern, einem DSP/FPGA-Steuerungssystem und einem kontaktlosen Energieuebertragungssystem mit sekundaerseitigem Gleichrichter

  7. Quantum Confined Semiconductors

    Science.gov (United States)

    2015-02-01

    scattering mechanisms ( acoustic , piezoelectric, polar and non-polar optical) and the ionized impurity scattering. Since InAs and GaSb are binary... pyrometer referenced at GaSb oxide desorption temperature of 530 C. Figure 6a plots the 10 K carrier densities as a function of Tg. The SLs grown

  8. UML-based testcase- and system model for railway process control- and safety engineering; UML-basierte Testfall- und Systemmodelle fuer die Eisenbahnleit- und -sicherungstechnik

    Energy Technology Data Exchange (ETDEWEB)

    Knollmann, V.

    2007-12-15

    The continuous introduction of more sophisticated and more complex automation systems is of high relevance for operations- and control devices for railway applications. One example of this trend is the European Train Control System (ETCS). I is harmonized for all European member states and currently deployed for commercial use on selected lines. Applications like ETCS take responsibility for passengers, environment and the rolling stock material. For this reason, the development of those applications is characterized by high demands on testing, documentation and quality assurance. Unfortunately, real projects have proven to achieve these high demands only with tremendous efforts as long as they stick to their traditional development processes and methods. Therefore, a wide spread exploration for new concepts regarding planning, implementation and - most of all - testing of safety relevant systems is under its way. This thesis contributes to the search for new design methods for such systems. It combines recent achievements in the environment of the Unified Modeling Language (UML) to an integrated approach for a consistent testcase- and system description in a single UML model. The model comprises the UML profiles SysML (System Modeling Language) and U2TP (UML 2 Testing Profile), which are officially specified and released by the Object Management Group (OMG). This thesis shows how based on these two profiles - a single, combined system- and testcase model can be build - relationships between requirements, implementation- and testcase can be established - requirement relationships can be evaluated automatically to ensure model consistency and to determine implementation and testcase coverage - C++-code can be generated directly from the model - TTCN-3-code (Testing and Test Control Notation, Version 3) can be derived automatically from the model - a toolchain can be set up which supports all mentioned functions. In order to prove the feasibility of this approach, a case study has been performed which shows how a component of the railway laboratory RailSiTe {sup registered} (Rail Simulation and Testing) of the German Aerospace Center has been described using a combined testcase- and system model. Apart from the case study and from the theoretical basics of combined UML models, this thesis deals with surrounding aspects of the modeling method. This includes comparisons with other means of description or embedding object-oriented modeling in traditional development processes. The overall result is that both the approach and the toolchain are working properly and can be applied in real world projects. The anticipated advantages like re-usage of model items, more efficient testing, more formal system descriptions and avoidance of discontinuous notations in the whole process appeared in the theoretical derivation as well as in the practical usage of the method. So there is reason to believe that this approach will find future applications outside its scientific origin. (orig.)

  9. Process development for utilizing asbestos cement waste in rotary kilns for the cement industry. Final report; Erarbeitung eines Verfahrens zur stofflichen Verwertung von zementgebundenen Asbestprodukten in Drehrohroefen fuer die Zementindustrie. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Schlegel, R.; Kieser, J.; Kraehner, A.

    1999-11-01

    The law for recycling and waste demands the utilization also for waste of asbestos cement (ac). The procedure of thermal utilization of ac in the flame of a rotary cement kiln was developed and patented by the research institute IBU-tec Weimar, Germany. The ac-material has to be pre-pulverized and grinded to a degree of fineness of R{sub 90}<15%. Considerations of safety engineering lead to the idea of common fine grinding of old oil (oo) and ac. This new procedure was searched in FuE-project in 1998/99 (financial support by BMBF). A mash of ac and oo was generated as a utilization product ready for firing which was injected into the flame of the rotary cement kiln. This particles of ac smelt to spherical shaped particles at a temperature above 1500 C. They were utilized by clinker formation. The material and gas stream leaving the kiln does not contain fibres of asbestos. This was demonstrated in a small equipment burning test. The industrial realization concerning cement plant Ruedersdorf, near Berlin, was searched, technologically described and safety engineeringly and financially assessed by a project study. Process-technical and financial advantages were seen for the dry fine grinding. The wet fine grinding with old oil could be used in cement plants using old oil as fuel. (orig.) [German] Das Kreislaufwirtschafts- und Abfallgesetz (1994) fordert u.a. die stoffliche Verwertung auch fuer Asbestzementabfaelle (AZ). Das vom Institut fuer Baustoff- und Umweltschutz-Technologie Weimar 1995 entwickelte und patentierte Verfahren zur thermischen Verwertung von AZ in der Flamme eines Zementdrehrohrofens erfuellt diese Forderung. Das AZ-Material muss vorzerkleinert und bis zur Rohmehlfeinheit (R{sub 90}<15%) feingemahlen werden. Sicherheitstechnische Ueberlegungen fuehrten zu der Idee, die Feinmahlung zusammen mit Altoel (AOe) zu erproben. Diese Verfahrensvariante wurde im Rahmen eines FuE-Projektes 1998/99 untersucht (finanzielle Foerderung durch das BMBF). Als

  10. Design and optimization of the low frequency eddy current technique for the volumetric inspection of austenitic small diameter tubes with a wall thickness up to 12 mm; Auslegung und Optimierung des Niederfrequenz-Wirbelstrom-Verfahrens fuer die volumetrische Pruefung von austenitischen Neben- und Kleinleitungen mit Wandstaerken bis 12 mm

    Energy Technology Data Exchange (ETDEWEB)

    Becker, R; Bessert, S; Disque, M; Weiss, R [Fraunhofer-Institut fuer Zerstoerungsfreie Pruefverfahren, Saarbruecken (Germany)

    1998-11-01

    The low-frequency eddy current technique discussed is a suitable external inspection technique detecting defects at the inner walls of small-diameter tubes and measuring their depths via the ligament. A testing system with optimized sensor lus software for image recording, evaluation, display and documentation is available. The current state of development of the system permits detection and measurement of defects up to 20 mm in size in austenitic inner walls 12.5 mm thick down to a depth of 3 mm. This applies both to the homogenous base metal and the weld with {delta} ferrite. (orig./CB) [Deutsch] Das vorgestellte Niederfrequenz-Wirbelstrom-Verfahren ist geeignet, bei Pruefung von aussen Fehler an der Innenseite von Klein- und Nebenleitungen nachzuweisen und ueber das Ligament deren Tiefe zu bestimmen. Ein entsprechendes Pruefsystem mit optimiertem Sensor und der Software zur Aufnahme, Auswertung, Darstellung und Dokumentation der Wirbelstrom-Urdaten steht zur Verfuegung. Beim jetzigen Entwicklungsstand liegt die Nachweisgrenze fuer einen 20 mm langen Innenfehler in einer 12.5 mm dicken austenitischen Wandung bei einer Fehlertiefe von 3 mm. Dies gilt sowohl fuer den homogenen Grundwerkstoff als auch fuer Schweissgefuege mit {delta}-Ferrit. (orig./MM)

  11. Energy saving advice on site. A financial incentive of the Federal Ministry of Economics and Technology; Energiesparberatung vor Ort. Ein Foerderprogramm des Bundesministeriums fuer Wirtschaft und Technologie

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-06-15

    Energy conservation is useful not only from the perspective of energy policy and climate policy. Energy conservation also means a noticeable cost savings. Here, the program 'on-site consultation' comes in: experts assist owners, renters and tenants of residential buildings in the renovation of real estate. The expert advice is funded by the Kreditanstalt fuer Wiederaufbau (Frankfurt (Main), Federal Republic of Germany) if it is recognizable that this is not achievable economically.

  12. The influence of mesoscale structures on stratospheric ozone. Part A: the potential of mesoscale mountain waves for polar stratospheric clouds (PEPS). Final report; Der Einfluss mesoskaliger Strukturen auf das stratospaerische Ozon. T. A: Das Potential von mesoskaligen Gebirgswellen fuer die Entstehung von polaren Stratosphaerenwolken (PEPS). Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Doernbrack, A.; Volkert, H.

    1999-11-11

    In this project a succession of tasks, partly going beyond what had originally been planned, was carried out and documented in a series of publications: (a) establishment of a mesoscale forecasting operation for measuring campaigns such as the Lidar measurements carried out in Part B (SAPOS); (b) case study calculations on PSC observations; (c) simulation of the entire month of January 1997; (d) derivation of criteria for wave activity from conventional weather data; (e) evaluation of these criteria for the last 20 winter periods. Besides this there was a lively exchange of simulation and measuring results with other groups within the OFP and from Scandinavian countries. In executing this extensive work programme the researchers profited greatly from the preliminary work done on the use of an experimental weather forecasting model (Leutbecher and Volkert, 1998), a dissertation prepared in the working group (Leutbecher, 1998), and the actual project work which was carried out by a doctor of science with extensive experience in the operation of complex meteorological models. [German] Im vorliegenden Projekt wurde eine Stufenleiter von Aufgaben erledigt, teilweise in Erweiterung der urspruenglichen Planung, und durch eine Reihe von Veroeffentlichungen dokumentiert: (a) Einrichtung eines mesoskaligen Vorhersagebetriebs fuer Messkampagnen, u.a. fuer die Lidar-Messungen aus Teil B (SAPOS); (b) Fallstudienrechnungen zu PSC Beobachtungen; (c) eine komplette Monatssimulation des Januar 1997; (d) die Ableitung von Kriterien fuer Wellenaktivitaet aus konventionellen Wetterdaten; (e) Auswertung dieser Kriterien fuer die letzten zwanzig Winterperioden. Daneben bestand ein reger Austausch an Simulations- und Messergebnissen mit anderen Gruppen innerhalb des OFP und in den skandinavischen Laendern. Das umfangreiche Arbeitspensum profitierte stark von Vorarbeiten zum Einsatz eines experimentellen Wettervorhersagemodells (Leutbecher und Volkert, 1996), einer in der Arbeitsgruppe

  13. The energy-effective redesign of district heat supply for the city of Eisenach; Energiewirtschaftliche Neugestaltung der Fernwaermeversorgung fuer die Stadt Eisenach

    Energy Technology Data Exchange (ETDEWEB)

    Stich, J. [Eproplan GmbH, Stuttgart (Germany)

    1996-09-01

    The present contribution describes the optimal heat generation for the district heat area ``North`` of the city of Eisenach and economic redesign of this district heat network. The district heat network is operated by the public utility of Eisenach (Eisenacher Versorgungs-Betriebe GmbH (EVB)), which also runs the heating station, that used to be fuelled with coal. (orig./GL) [Deutsch] Der vorliegende Beitrag befasst sich mit der optimalen Waermeerzeugung fuer das Fernwaerme-Versorgungsgebiet `Nord` der Stadt Eisenach und mit der wirtschaftlichen Umgestaltung dieses Fernwaermenetzes. Das Fernwaermenetz wird durch die Eisenacher Versorgungs-Betriebe GmbH (EVB) betrieben, wie auch das ehemalige kohlegefeuerte Heizwerk. (orig./GL)

  14. Low-cost automatic meter reading system for the productive and energy supplying industry; Kostenguenstige, automatische Ressourcenzaehlerauslesung fuer Industrie und Versorgungsunternehmen

    Energy Technology Data Exchange (ETDEWEB)

    Rac, M. [Hydrometer GmbH, Ansbach (Germany)

    2000-09-01

    The continuous automatic controlling of energy and resource consumption as a tool for savings, marketing and early leakage detection is often not used by small to medium sized companies and energy suppliers. Usually the high system costs are the main reason for not implementing such a system. However, selecting the right system components may lead to a better pay-off. (orig.) [German] Die kontinuierliche automatische Ressourcenueberwachung als Massnahme zur Einsparung, als Wettbewerbsinstrument sowie zur fruehzeitigen Leckageerkennung wird in vielen kleinen und mittleren Betrieben und Versorgungsunternehmen nicht genutzt. Meistens sind die zu hohen Kosten fuer ein solches System der ausschlaggebende Faktor. Mit der richtigen Wahl der Systemkomponenten erschliessen sich aber neue Moeglichkeiten. (orig.)

  15. Environment 2000. New trends in energy supply. Onset of the solar age - strategies for a sustainable future. Mobility in the new millenium - protection of humans and nature. Conservation - champions of plants and animals; Umwelt 2000: Die Energiewende: Aufbruch ins solare Zeitalter - Strategien fuer eine nachhaltige Zukunft. Mobil im Millenium - Entlastung fuer Mensch und Natur. Naturschutz - Die Anwaelte von Pflanzen und Tiere

    Energy Technology Data Exchange (ETDEWEB)

    Tempel, H.G.; Ulrich, M. [comps.; Zipf, M.

    2000-07-01

    This brochure presents the key issues in Federal German environmental policy. It provides a balance of the progress made so far and shows the goals and perspectives of the German government for environmental policy at the turn of the 21. century. [German] Die hier vorgelegte Broschuere verdeutlicht die Schwerpunkte der Umweltpolitik der Bundesregierung. Sie bilanziert die bisher erreichten Fortschritte und zeigt Ziele und Perspektiven fuer die Umweltpoltik an der Schwelle des 21. Jahrhunderts auf. (orig.)

  16. Transport of sediments in Himalaya-Karakorum and its influence on hydropower plants; Sedimenttransportprozesse im Himalaya-Karakorum und ihre Bedeutung fuer Wasserkraftanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Palt, S.M.

    2001-07-01

    of a cascade of staircase local falls. Their distance in-between the falls as well as their height difference at the steps is strongly depending on the river slope. (orig.) [German] Die vorliegende Arbeit beschaeftigt sich mit den Sedimenttransportprozessen in alpinen Gebirgsregionen und deren Auswirkungen auf Wasserkraftanlagen. Ziel der Arbeit ist es, zum Verstaendnis des natuerlichen Sedimenttransportes mit der fuer Gebirgsregionen typischen Charakteristik von 'High Magnitude-Low Frequency - Prozessen' beizutragen, um eine den Transportverhaeltnissen geeignete Auslegung von geplanten Wasserkraftanlagen zu finden. Am Beispiel der Gebirgsregion des Himalaya-Karakorums werden die komplexen Transportvorgaenge im grossraeumigen Raum des Makromassstabes erlaeutert. Dabei wird auf die Massentransporte eingegangen, die durch Naturgefahren wie Erdbeben, Felsgleitungen, Erdrutsche, Muren, Gletscherbrueche und Hochwaesser ausgeloest werden. Der Schwerpunkt der Arbeit liegt in der Durchfuehrung von umfangreichen Naturmessungen im untergeordneten Raum des Mesomassstabes im Bereich von einzelnen Flussabschnitten. Die Naturmessungen umfassen morphologische und topographische Aufnahmen, Abfliessmessungen, Geschiebe- sowie Schwebstoffmessungen an 16 Gebirgsfluessen eines insgesamt 80000 km{sup 2} grossen Projektgebietes im Himalaya-Karakorum. Aufgrund der extremen Verhaeltnisse der Gebirgsfluesse der Region hinsichtlich vorhandener Korngroesse des Bettmaterials sowie die Groessenordnung der Fliessgeschwindigkeiten wurde fuer die Untersuchungen eigens der mobile Geschiebesammler B-69 entwickelt, gebaut und auf seine hydraulische und sedimentologische Effizienz hin geprueft. Der Einsatz des B-69 hat sich im Feld bewaehrt und ist fuer weitere Anwendungen bei Hochwasserereignissen in kiesfuehrenden Fluessen geeignet. Als massgebender Parameter zur Beschreibung der Morphologie, der Stroemung, der Sohlenstabilitaet und des Geschiebetransportes von Gebirgsfluessen im

  17. Analysis of an accident involving a battery of hydrogen flasks; Analyse eines Unfalls mit einer Flaschenbatterieanlage fuer Wasserstoff

    Energy Technology Data Exchange (ETDEWEB)

    Lietze, D. [Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin (Germany)

    2000-09-01

    When a hydrogen storage flask battery was used again after an outage period, a small section of the high-pressure collecting main burst. Luckily, the leaking hydrogen did not ignite and there were no fires or explosions causing secondary damage. The cause of failure was identified on the basis of extensive knowledge on pipeline loads shortly after detonative reactions. [German] Nach einer laengeren Pause kam es bei der Inbetriebnahme einer Wasserstoff-Flaschenbatterieanlage zum Bersten eines kleinen Teilstuecks der Hochdrucksammelleitung. Gluecklicherweise gab es keine Zuendung des an dieser Bruchstelle ausstroemenden Wasserstoffs und damit auch keine weiteren Sekundaerschaeden durch einen Brand bzw. durch eine Raumexplosion. Aufgrund der bei umfangreichen Untersuchungen ueber die Beanspruchung von Rohrleitungen bei detonativ verlaufenden Reaktionen gemachten Erfahrungen konnte die Ursache fuer diesen Schadensfall ermittelt werden. (orig.)

  18. Dependence of surface distribution of self-assembled InSb nanodots on surface morphology and spacer layer thickness

    Energy Technology Data Exchange (ETDEWEB)

    Godbole, M., E-mail: mohit.godbole@nmmu.ac.za [Department of Physics, Nelson Mandela Metropolitan University, PO Box 77000, Port Elizabeth 6031 (South Africa); Olivier, E.J. [Department of Physics, Nelson Mandela Metropolitan University, PO Box 77000, Port Elizabeth 6031 (South Africa); Coetsee, E.; Swart, H.C. [Department of Physics, University of the Free State, PO Box 339, Bloemfontein 9300 (South Africa); Neethling, J.H.; Botha, J.R. [Department of Physics, Nelson Mandela Metropolitan University, PO Box 77000, Port Elizabeth 6031 (South Africa)

    2012-05-15

    Self-assembled InSb nanodots (NDs) were grown on a GaSb (1 0 0) substrate using metal-organic vapour phase epitaxy (MOVPE). The effects of etching depth of the substrate and thickness of the GaSb buffer layer on the density and size distribution of single and double layer dots were studied for detector applications. The etch depth of the substrate was varied up to 30 {mu}m. In this particular study, the dots were grown at 450 Degree-Sign C and the GaSb spacer thickness was varied between 50 nm and 200 nm. The optimum substrate etch depth was found to be 30 {mu}m while the best spacer thickness was found to be 200 nm.

  19. Dependence of surface distribution of self-assembled InSb nanodots on surface morphology and spacer layer thickness

    International Nuclear Information System (INIS)

    Godbole, M.; Olivier, E.J.; Coetsee, E.; Swart, H.C.; Neethling, J.H.; Botha, J.R.

    2012-01-01

    Self-assembled InSb nanodots (NDs) were grown on a GaSb (1 0 0) substrate using metal-organic vapour phase epitaxy (MOVPE). The effects of etching depth of the substrate and thickness of the GaSb buffer layer on the density and size distribution of single and double layer dots were studied for detector applications. The etch depth of the substrate was varied up to 30 μm. In this particular study, the dots were grown at 450 °C and the GaSb spacer thickness was varied between 50 nm and 200 nm. The optimum substrate etch depth was found to be 30 μm while the best spacer thickness was found to be 200 nm.

  20. Characterization of a composite membrane for the conditioning of refined and natural gas; Charakterisierung einer Kompositmembran fuer die Konditionierung von Raffinerie- und Erdgas

    Energy Technology Data Exchange (ETDEWEB)

    Schonert, M. [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Chemie

    1999-07-01

    The present diploma investigates the permeation behaviour of gas through a composite membrane. The selective layer of polyoctylmethylsiloxan is coated on porous support polyacrylnitrile layer. As this membrane should be used for the conditioning of refined and natural gas, (hydrocarbon-dew-pointing), the interest is focussed upon the permeation behaviour of methane and higher hydrocarbon. The permeability of single gas will be determined using the pressure increase method. The description of the permeability will be done through the free volume model. This model is a medium to describe the permeation behaviour of gas mixtures mathematically taking into account the real gas behaviour. The maximum feed pressure is 60 bar. It will be shown that the permeability of a multi component mixtures can be calculated satisfactorily with reduced mutual influence of the gas molecules. (orig.) [German] In der vorliegenden Arbeit wird das Permeationsverhalten von Gasen durch eine Kompositmembran untersucht. Die selektive Schicht aus Polyoctylmethylsiloxan ist auf einer poroesen Polyacrylnitril-Traegerschicht aufgebracht. Da die Membran fuer die Konditionierung von Raffinerie- und Erdgas (KW-Taupunkteinstellung) eingesetzt werden soll, liegt das Interesse in dem Permeationsverhalten von Methan und den hoeheren Kohlenwasserstoffen. Es wird die Permeabilitaet von Reingas mit Hilfe der Druckanstiegsmethode bestimmt. Die Beschreibung der Permeabilitaet geschieht durch das Modell des Freien Volumens. Hiermit wird versucht, das Permeationsverhalten von Gasgemischen unter Beruecksichtigung des Realgasverhaltens rechnerisch zu beschreiben. Der maximale Feeddruck betraegt 60 bar. Es wird gezeigt, dass sich die Permeabilitaet fuer ein Mehrkomponentengemisch mit reduzierter gegenseitiger Beeinflussung der Gasmolekuele zufriedenstellend berechnen laesst. (orig.)

  1. The integrity concept and its implementation; Das Integritaetskonzept und seine praktische Anwendung

    Energy Technology Data Exchange (ETDEWEB)

    Roos, E.; Herter, K.H.; Schuler, X. [Stuttgart Univ. (Germany). MPA; Koenig, G. [EnBW Kernkraft GmbH, Neckarwestheim (Germany)

    2008-07-01

    The safety of nuclear power plants is mainly based on the assumption that operational and accidental loads on mechanical components and systems that must not fail due to their safety relevant importance can be controlled. This implies that the respective quality is available and assured over the complete projected lifetime. In this context the term ''break preclusion'' is often used which is commonly defined as the ''leak-before-break'' demonstration based on fracture mechanical analysis in connection with fulfilled basic safety for design and manufacture. Usually it is not taken into account that for guaranteed break preclusion the controllability of any possible operational damage mechanism is of crucial importance. On the contrary, the integrity concept as implementation of the basic safety concept taking into account the particular plant-specific preconditions constitutes a closed master plan that accommodates for the necessity of a multi-level safeguarding and continuous actualization. The integrity concept is part of the aging management for mechanical components and systems. The practical implementation of this concept for integrity confirmation is demonstrated for the case of the feed water lines within the containment of the NPP GKN1. [German] Die Sicherheit von Kernkraftwerken basiert wesentlichen darauf, dass die aus betrieblichen Belastungen und aus postulierten Stoerfallen resultierenden Beanspruchungen mechanischer Komponenten und Systeme, die entsprechend ihrer sicherheitstechnischen Bedeutung nicht versagen duerfen, sicher beherrscht werden koennen. Dies setzt voraus, dass die hierzu erforderliche Qualitaet ueber die gesamte Betriebszeit zur Verfuegung steht. Oft wird in diesem Zusammenhang der Begriff ''Bruchausschluss'' verwendet, unter dem haeufig ausschliesslich der ''Leck-vor-Bruch''-Nachweis durch eine bruchmechanische Analyse in Verbindung mit einer basissicheren Auslegung und Herstellung verstanden wird. Dabei wird nicht beruecksichtigt

  2. Establishing design criteria for crankshaft thrust bearings in gasoline and diesel engines by computer simulations and experiments. Crankshaft thrust bearing design - final report; Auslegungskriterien fuer Kurbelwellenaxiallager in Otto- und Dieselmotoren durch rechnergestuetzte Simulation und experimentelle Untersuchungen. Axialgleitlagerauslegung - Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Hunsicker, W. [Fachhochschule Mannheim (Germany). Inst. fuer Tribologie; Backhaus, K. [Univ. GH Kassel (Germany). Inst. fuer Maschinenelemente und Konstruktionstechnik; Schubert, W. [KS Gleitlager GmbH, Papenburg (Germany)

    2004-07-01

    Aim of the research-project was it to increase the calculation safety of crank shaft thrust bearings in combustion engines. The project was divided in two parts: (1) A simulation program to analyze the load bearing capacity of axial bearings under mixed lubrication has been developed at the Institut fuer Maschinenelemente und Konstruktionstechnik, University of Kassel. This part of the research-project has been presented at the FVV Herbsttagung in 2003. (2) The test runs with original parts were carried out on a newly designed thrust bearing test rig at the Institut fuer Tribologie, University of Applied Sciences in Mannheim. The following presentation shows the results of part 2. The experimental results show the influence of rotational frequency, load, bearing material, lateral run-out of the tread of the crankshaft and groove pattern. These test runs will help to dimension thrust bearings more efficiently. (orig.)

  3. Development of a monitor system for gas based detectors and measurement of electron attachment in the chamber gas; Aufbau eines Monitorsystems fuer gasbasierte Detektoren und Messung der Elektronenanlagerung im Kammergas

    Energy Technology Data Exchange (ETDEWEB)

    Linzmaier, Diana

    2009-01-15

    In the framework of an international collaboration a new electron-positron linear accelerator (ILC) with a c. m. energy up to 500 GeV is planned. For the International Large Detector Concept (ILD) a time projection chamber (TPC) shall perform precise measurements of the particle tracks. In order to fulfil the high requirements on the resolution, a microstructure gas-amplification system is used for read-out. For research and development of the detector principle for the application at the ILC at DESY a large TPC prototype is developed. For the operation of the detector it is necessary to monitor its state and especially that of the measurement gas. For this purpose in the framework of this thesis a slow control system is built, which shall make possible for the different collaboration partners to operate the prototype and to integrate the slow control data into their measurement. For this with an object-oriented control system a graphic user interface was created, which makes an overview over the applied measurement devices and a driving allows. Furthermore the influence of impurities of the gas mixture by oxygen was studied. For this with a small TPC prototype measurements of the electron attachment coefficient at different oxygen concentrations were performed with a magnetic flux density of 4 T. From the amplitude of the measurement signal a rate for the electron attachment could be determined. The values obtained for this agree sufficiently in comparison with literature values. [German] Im Rahmen einer internationalen Kollaboration ist ein neuer Elektronen-Positronen-Linearbeschleuniger (ILC) mit einer Schwerpunktsenergie bis zu 500 GeV geplant. Fuer das International Large Detector Concept (ILD) soll eine Zeitprojektionskammer (TPC) praezise Vermessungen der Teilchenspuren durchfuehren. Um die hohen Anforderungen an die Aufloesung zu erfuellen, wird ein Mikrostruktur-Gasverstaerkungssystem zur Auslese verwendet. Zur Erforschung und Entwicklung des

  4. Treatment for GaSb surfaces using a sulphur blended (NH{sub 4}){sub 2}S/(NH{sub 4}){sub 2}SO{sub 4} solution

    Energy Technology Data Exchange (ETDEWEB)

    Murape, D.M., E-mail: Davison.Murape@nmmu.ac.za [Department of Physics, Nelson Mandela Metropolitan University, PO Box 77000, Port Elizabeth, 6031 (South Africa); Eassa, N.; Neethling, J.H. [Department of Physics, Nelson Mandela Metropolitan University, PO Box 77000, Port Elizabeth, 6031 (South Africa); Betz, R. [Department of Chemistry, Nelson Mandela Metropolitan University, PO Box 77000, Port Elizabeth, 6031 (South Africa); Coetsee, E.; Swart, H.C. [Department of Physics, University of the Free State, PO Box 339, Bloemfontein, 9300 (South Africa); Botha, J.R.; Venter, A. [Department of Physics, Nelson Mandela Metropolitan University, PO Box 77000, Port Elizabeth, 6031 (South Africa)

    2012-07-01

    A sulphur based chemical, [(NH{sub 4}){sub 2}S/(NH{sub 4}){sub 2}SO{sub 4}] to which S has been added, not previously reported for the treatment of (1 0 0) n-GaSb surfaces, is introduced and benchmarked against the commonly used passivants Na{sub 2}S{center_dot}9H{sub 2}O and (NH{sub 4}){sub 2}S. The surfaces of the treated material were studied by scanning electron microscopy (SEM), Auger electron spectroscopy (AES) and X-ray photoelectron spectroscopy (XPS). It has been found that the native oxides present on the GaSb surface are more effectively removed when treated with ([(NH{sub 4}){sub 2}S/(NH{sub 4}){sub 2}SO{sub 4}] + S) than with (NH{sub 4}){sub 2}S or Na{sub 2}S{center_dot}9H{sub 2}O, as evidenced by the ratio of the O{sub 506eV} to Sb{sub 457eV} AES peaks. XPS results reveal that Sb{sub 2}S{sub 3}/Sb{sub 2}S{sub 5} 'replaces' Sb{sub 2}O{sub 3}/Sb{sub 2}O{sub 5}, suggesting that sulphur atoms substitute oxygen atoms in Sb{sub 2}O{sub 3}/Sb{sub 2}O{sub 5} to form Sb-S. It seems sulphurization only partially removes Ga{sub 2}O{sub 3}. Treatment with ([(NH{sub 4}){sub 2}S/(NH{sub 4}){sub 2}SO{sub 4}] + S) also results in a noteworthy improvement in the current-voltage (I-V) characteristics of Au/n-GaSb Schottky contacts compared to those fabricated on as-received material.

  5. Development of an early warning system for strong environmental pollution by measuring the activation of defined universally existing stress genes. Final report; Das Auftreten spezifischer Stressproteine bei Umweltbelastung in Chironomiden: Entwicklung eines neuen Fruehwarnsystems fuer starke Umweltbelastung durch Messung der Aktivierung definierter, universell vorkommender Stressgene bei ausgewaehlten Indikatororganismen. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Kloetzel, P.M.; Mueller, W.

    1991-12-31

    In the present pilot study we established an ELISA based detection system which allows sensitive monitoring of stress induction as a result of heavy metal pollution. The system is based on the immunological detection of the stress induced hsp70 in larvae of Chironomidae. Using this system it is possible to detect environmental pollution by heavy metals far beyond lethal toxicity values. Since only very few animals are needed the system can also be used in field tests. For poluted isopodes as Oniscus asellus for example a single animal turned out be sufficient to monitor stress induction by Pb{sup +}. The established system ought to serve as basis for a more extended study in which different animals are collected from various polluted environments and tested with respect to already induced hsp synthesis. (orig.) [Deutsch] In der vorliegenden Pilotstudie konnte ein sensitives Nachweissystem fuer die Induktion des ubiquitaeren Stresssystem durch Schwermetalle auf der Basis der immunologischen Detektion von HSP70 etabliert werden. Dieses, auf ELISA Basis arbeitende Testverfahren ermoeglicht es Schwermetallbelastungen weit unterhalb der Toxizitaetsgrenze ueber die Induktion der HSP70 Synthese in Chironomidenlarven nachzuweisen. Die Tatsache, dass nur wenige Tiere fuer eine statistische Aussage benoetigt werden laesst eine Anwendungsmoeglichkeit auch auf Freilandtiere erwarten. So reicht fuer bleibelastete Freiland-Asseln ein einziges Tier zum immunologischen Belastungsnachweis aus. Damit sind die Grundlagen fuer die zweite Phase, die Freilandphase, in welcher sowohl Freilandtiere als auch Gewaesser- und Sedimentproben von verschiedenen Standorten in die Untersuchungen miteinbezogen werden sollen; geschaffen. Es koennen jetzt Tiere aus belasteten Gewaessern bezueglich bereits erfolgter Stressproteinproduktion aber auch auf eine Neuinduzierbarkeit nach zusaetzlicher Laborbelastung untersucht werden. Ebenso koennen Labortiere auf ihre Reaktion gegenueber belasteten

  6. Facilities granted by the authorities to companies certified in accordance with the EC Eco-Audit Ordinance; Behoerdliche Erleichterungen fuer validierte Unternehmen nach der EG-Oeko-Audit-Verordnung

    Energy Technology Data Exchange (ETDEWEB)

    Funda, K. [Witzenhausen-Institut fuer Abfall, Umwelt und Energie, Witzenhausen (Germany)

    1999-07-01

    During the past few years there has been a growing discussion on possible ways of granting facilities and allowing simplified legal procedures for companies which have been certified according to the EU Eco-Audit Regulation and which have thus submitted themselves voluntarily to the requirements of this code. This paper gives an account of the current stage of the discussion and describes the facilities currently granted by the German federal states to certified companies. It is largely based on the relevant regulations and decrees issued by the federal states as chief enactors of environmental law and on information given orally and in writing by the various ministries involved in the data search carried out between January and March 1999. [German] In den letzten Jahren wurde zunehmend die Frage nach ordnungsrechtlichen Erleichterungen und Vereinfachungen fuer Unternehmen diskutiert, die eine Validierung nach der EG-Oeko-Audit-Verordnung durchgefuehrt und sich damit freiwillig den Anforderungen dieses Regelwerkes unterworfen haben. Der vorliegende Beitrag versucht den aktuellen Stand dieser Diskussion zu beleuchten und die zur Zeit von den Bundeslaendern eingeraeumten Erleichterungen fuer Unternehmen darzustellen. Grundlage der Aussagen sind im wesentlichen die einschlaegigen Vorschriften und Erlasse der Laender, in deren Hand zum groessten Teil der Vollzug des Umweltrechtes liegt, sowie muendliche und schriftliche Informationen aus den verschiedenen Fachministerien, die im Rahmen einer Datenrecherche zwischen Januar und Maerz 1999 zusammengetragen wurden. (orig.)

  7. Emission concepts for future passenger car diesel engines; Emissionskonzepte fuer zukuenftige Pkw-Dieselmotoren

    Energy Technology Data Exchange (ETDEWEB)

    Krueger, M.; Wiartalla, A.; Lichtenberg, T.; Koerfer, T. [FEV Motorentechnik, Aachen (Germany)

    2003-07-01

    guenstigen Kraftstoffverbrauch eines Dieselfahrzeugs beizubehalten. Vor diesem Hintergrund werden im Rahmen dieses Beitrages brennverfahrensseitige Massnahmen sowie Abgasnachbehandlungskonzepte hinsichtlich Wirkungsgrad undd Einfluss auf den Kraftstoffverbrauch analysiert. Es kann festgehalten werden, dass fuer den Pkw-Dieselmotor noch ein beachtliches Emissionsreduktionspotenzial erschlossen werden kann. Eine Erfuellung der nach 2005 diskutierten bzw. schon beschlossenen Emissionsgrenzwerte allein durch Weiterentwicklung des Brennverfahrens erscheint allerdings aus heutiger Sicht als schwierig. Insbesondere vor dem Hintergrund des Kraftstoffverbrauchs stellt sich eine geeignete Kombination von innermotorischen Massnahmen und Abgasnachbehandlung als der sinnvollere Weg dar. Entscheidend fuer den Erfolg eines solchen Konzeptes wird die Leistungsaufnahme der Abgasnachbehandlungsmassnahme im weitesten Sinne sein. Dazu zaehlt sicherlich das Thermomanagement von Motor und Abgassystem. Darueber hinaus muessen aber auch die Faktoren beruecksichtigt werden, die das Regenerationsverhalten der diskontinuierlich betriebenen Nachbehandlungssysteme Partikelfilter und NO{sub x}-Speicherkatalysator bestimmen. Hier sind in erster Linie das Kraftstoffadditiv und der Kraftstoffschwefel bzw. die Schwefelproblematik des NO{sub x}-Speicherkatalysators zu nennen. (orig.)

  8. Guide to the construction of small-scale hydropower plants; 2. ed.; Leitfaden fuer den Bau von Kleinwasserkraftanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Berg, W.; Giesecke, J.; Grabitz, R.; Haakh, F.; Haury, H.G.; Horlacher, H.B.; Hutarew, A.; Latrille, W.; Mackert, W.; Mueller, P.; Sauer, K.; Schmid, H.; Schweickert, H.; Waller, H.

    1994-12-31

    Hydropower plays a prominent role in Baden-Wuerttemberg`s policy of promoting the use of renewable energy resources. This is due, firstly, to the fact that hydropower is a reliable, proven technology, and secondly to the favourable topographic and hydrological conditions Baden-Wuerttemberg offers for the development of hydropower. The Baden-Wuerttembergian Water Management Association hopes that this guide will provide the interested reader with sufficient information for assessing or initiating concrete projects. The individual chapters have been adapted from papers of the team of authors referred to in the foreword. They are largely representative of the Federal German Republic (Baden-Wuerttemberg). The guide thus provides a complement to the Manual of the International Electrotechnical Commission, the first German translation of which is contained in chapter 3. As this manual is required to be valid worldwide, it must necessarily be confined to technical and process organisational matters. The editors have been at pains t provide a concrete, practice-oriented rather than a textbook-like presentation of the subject. The Water Management Association and the authors hope that this guide will stimulate public interest in the continued development of small-scale hydropower plants in compliance with energy-political, private-economical, and ecological requirements. (orig.) [Deutsch] Die Wasserkraft nimmt im Hinblick auf eine staerkere Hinwendung zu regenerativen Energiequellen eine Vorreiterstellung in Baden-Wuerttemberg ein. Dies liegt in der zuverlaessigen und erprobten Technologie begruendet und in den guenstigen topographischen und hydrologischen Voraussetzungen fuer die Wasserkraftnutzung in Baden-Wuerttemberg. Der Wasserwirtschaftsverband Baden-Wuerttemberg hofft, mit dem `Leitfaden` den Interessenten genuegend Informationen an die Hand gegeben zu haben, die zur Beurteilung und gegebenenfalls zur Inangriffnahme eines konkreten Projektes erforderlich sind. Die

  9. United Nations conference of environment and development, held at Rio de Janeiro in June 1992. Documents. Agenda 21; Konferenz der Vereinten Nationen fuer Umwelt und Entwicklung im Juni 1992 in Rio de Janeiro. Dokumente. Agenda 21

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    With the translation of Agenda 21 all the documents released in connection with the United Nations Conference of Environment and Development (UNCED) at Rio de Janeiro (June 1992) have now been made generally available also in the German language. Agenda 21, which in 40 chapters discusses the basic political platforms of environment-oriented sustainable development, is an action programme for the 21st century adopted at Rio by more than 170 states. The action programme contains detailed instructions as to the practices to be abandoned to prevent any further deteriorations as well as strategies to be adopted to gradually relieve the situation and to ensure a reasonable and sustainable exploitation of our natural resources. One important approach to this goal is that environmental issues are considered within a global context, thus being a prominent factor in all political spheres. The rules set up in this action programme are applicable to industrial and developing countries alike. It offers - in broad outline - prescriptions for the combatting poverty, control of overpopulation, reconciliation of commercial and environmental interests, disposal of refuse and chemicals, for climate, energy and agricultural policies as well as the ways in which industrial and developing countries could cooperate both financially and in terms of shared technologies. The bilateral and multilateral development policies of the Federal Government are largely based on Agende 21. (orig./HP) [Deutsch] Mit der Uebersetzung der Agenda 21 sind nunmehr alle Dokumente der Konferenz fuer Umwelt und Entwicklung der Vereinten Nationen (UNCED) in Rio de Janeiro (June 1992) auch in deutscher Sprache der Oeffenlichkeit zugaenglich. Die Agenda 21, die mit ihren 40 Kapiteln alle wesentlichen Politikbereiche einer umweltvertraeglichen, nachhaltigen Entwicklung anspricht, ist das in Rio von mehr als 170 Staaten verabschiedete Aktionsprogramm fuer das 21. Jahrhundert. Mit diesem Aktionsprogramm werden

  10. Aircraft Research Guideline 1999 - 2002: High pressure compressor - preliminary design as a basis for the development of an efficient and environmentally friendly core engine. Final report; Leitlinie Luftfahrtforschung 1999 - 2002: Hochdruckverdichter-Vorauslegung als Grundlagenuntersuchung zur Entwicklung eines Kerntriebwerkes fuer einen effizienten und umweltfreundlichen Antrieb. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Klinger, H.

    2001-08-01

    This report completes the documentation for the research project 'High Pressure Compressor - Preliminary Design as Basis for the Development of an Efficient and Environmentally Friendly Core Engine' which was funded by the Ministry of Economics of State Brandenburg. The objective of the project is to deliver a preliminary compressor aerodynamic design as well as design studies for an efficient, weight and cost improved compressor. The increase of stage pressure ratio and improved efficiency, whilst stage and blade count is reduced, has been achieved by advanced 3D methods. Compressor stability also at off-design conditions will be retained. The mechanical design focusses on a cost and weight optimised rotor not only for a conventional bladed discs but also for Blish stages. Various options for split casings have been developed and assessed. Alternative vortex reducers based on different design options have been carried out. The results from this project will be directly exploited in a follow-on project for a new nine-stage compressor. The new high pressure compressor will be a key element of the future two-shaft-engine architecture. (orig.) [German] Der vorliegende Bericht schliesst das vom Land Brandenburg im Rahmen der Leitlinie Luftfahrtforschung gefoerderte Vorhaben 'Hochdruckverdichter - Vorauslegung als Grundlagenuntersuchung zur Entwicklung eines Kerntriebwerkes fuer einen effizienten und umweltfreundlichen Antrieb' ab. Ziel dieses Vorhabens ist es, im Rahmen einer aerodynamischen Vorauslegung sowie Designstudien die notwendigen Technologien zu erarbeiten, um einen hinsichtlich Effizienz, Kosten, Gewicht und Wartungsintervallen verbesserten Hochdruckverdichter auszulegen. Die Erhoehung des Druckverhaeltnisses und des Wirkungsgrads bei verringerter Stufen- und Schaufelzahl sowie ein stabiles Betriebsverhalten auch ausserhalb des Auslegungspunktes wurde dabei durch eine aeusserst fortschrittliche 3D Schaufelauslegung erreicht. Auf der

  11. Photoluminescence investigation of type-II GaSb/GaAs quantum dots grown by liquid phase epitaxy

    Science.gov (United States)

    Wang, Yang; Hu, Shuhong; Xie, Hao; Lin, Hongyu; lu, Hongbo; Wang, Chao; Sun, Yan; Dai, Ning

    2018-06-01

    GaSb quantum dots (QDs) with an areal density of ∼1 × 1010 cm-2 are successfully grown by the modified (rapid slider) liquid phase epitaxy technique. The morphology of the QDs has been investigated by scanning electron microscope (SEM) and atom force microscope (AFM). The power-dependence and temperature-dependence photoluminescence (PL) spectra have been studied. The bright room-temperature PL suggests a good luminescence quality of GaSb QDs/GaAs matrix system. The type-II alignment of the GaSb QDs/GaAs matrix system is verified by the blue-shift of the QDs peak with the increase of excitation power. From the temperature-dependence PL spectra, the activation energy of QDs is determined to be 111 meV.

  12. ILSE - an attractive tutoring system for renewable energy on the Internet; ILSE - Ein interaktives Lernsystem fuer erneuerbare Energien im Internet

    Energy Technology Data Exchange (ETDEWEB)

    Quaschning, V.; Hanitsch, R. [Technische Univ. Berlin (Germany). Inst. fuer Elektrische Energietechnik

    1997-12-31

    Experiences gained by members of the Berlin Universiy of Technology show that information on solar energy plants is increasingly being accessed on the Internet also by non-scientists. This led the authors of the present article to the idea of developing an interactive tutoring system for renewable energy which goes far beyond a mere presentation of information and graphics. The article describes ILSE, the system that finally emerged from this initiative. (HW) [Deutsch] Die Erfahrungen der TU Berlin zeigen, dass in zunehmendem Masse auch Nicht-Wissenschaftler Informationen zu Solarsystemen ueber den Internetzugang abfragen. Hieraus entstand die Idee, das interaktive Lernsystem fuer erneuerbare Energie ILSE zu entwickeln, das ueber die reine Darstellung von Informationen und Grafiken weit hinausgeht. Das System wird vorgestellt. (HW)

  13. PROFIBUS-DP. Fundamentals and hints for users; PROFIBUS-DP. Grundlagen, Tips und Tricks fuer Anwender

    Energy Technology Data Exchange (ETDEWEB)

    Popp, M.

    1998-04-01

    PROFIBUS-DP is one of the most common field buses for industrial communication. The author provides competent help in using this technology. He describes 32 of the most common errors found in certification tests and shows how they can be remedies. Fundamentals and enhancements of PROFIBUS-DP are presented. PROFIBUS-DP telegrams for data interpretation are discussed at length, as are extensive GSD files. Particular emphasis is given to the projecting and commissioning of a system and practical guides for installation. (orig.) [Deutsch] PROFIBUS-DP gehoert zu den am haeufigsten eingesetzten Feldbussen fuer die industrielle Kommunikation. Der Autor bietet in diesem umfassenden Werk kompetente Unterstuetzung bei der Anwendung dieser Feldbustechnik. Es werden 32 der haeufigsten Fehler, die bei Zertifizierungstests festgestellt wurden, beschrieben und Wege zu ihrer Behebung dargestellt. Die Grundlagen von PROFIBUS-DP werden erlaeutert und die PROFIBUS-Erweiterungen vorgestellt. PROFIBUS-DP-Telegramme zur Interpretation des Datenverkehrs werden genauso detailliert erklaert wie eine umfangreiche GSD-Datei. Ein besonderer Schwerpunkt ist die Projektierung und Inbetriebnahme einer Anlage und den praxisgerechten Aufbaurichtlinien gewidmet. (orig./GL)

  14. Actively controlled current collector; Aktiv geregelter Stromabnehmer. Innovation fuer den schnellen Verkehr auf konventionellen Strecken

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, C.

    2003-07-01

    Deutsche Bahn is presently endeavouring to further improve the interaction between the overhead wire and the current collectors on its locomotives and trainsets. The major factors behind this initiative are cost, quality and noise prevention. The outcome is the development of a completely new type of current collector for high-speed operation even on conventional track. Prototypes have meanwhile undergone practical trials on the 200 km/h line from Augsburg to Donauwoerth. The new current collector is a single-arm pantograph jointly developed by DB and Bombardier Transportation. (orig.) [German] Die Deutsche Bahn versucht derzeit, das Zusammenspiel von Oberleitung und den Stromabnehmern ihrer Lokomotiven und Triebzuege weiter zu verbessern. Kosten, Qualitaet und Laermschutz sind dabei die wesentlichen Gruende. Sie haben zur Entwicklung eines voellig neuen Stromabnehmer-Typus speziell fuer den Hochgeschwindigkeitsverkehr auch auf konventionellen Strecken gefuehrt. Auf der Tempo-200-Strecke von Augsburg nach Donauwoerth absolvierten jetzt Prototypen erste Praxis-Tests. Es handelt sich um aktiv geregelte, akustisch optimierte Einholmstromabnehmer, gemeinsam entwickelt von DB und Bombardier Transportation. (orig.)

  15. Silage seepage and water protection. Production and recovery of silage seepage from animal feed and biomass for biogas plants. 7. ed.; Silagesickersaft und Gewaesserschutz. Anfall und Verwertung von Silagesickersaft aus Futtermitteln und Biomasse fuer Biogasanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Spiekers, Hubert [Bayerische Landesanstalt fuer Landwirtschaft (LfL), Freising-Weihenstephan (Germany); Attenberger, Erwin [Bayerisches Landesamt fuer Umwelt, Augsburg (Germany)

    2012-11-15

    The production of silage is now standard and an important basis for a successful milk and beef production. Silage is also needed in agricultural biogas plants as a substrate for energy production. This publication is intended to serve agriculture as a source of information and guidance document for the construction and operation of silos and the administration as an orientating work aid. The factors influencing the accumulation of silage seepage and the possibilities of prevention in silage and silage management are presented and evaluated from environmental and legal perspective. [German] Die Produktion von Silage ist heute Standard und eine wichtige Grundlage fuer eine erfolgreiche Milch- und Rindfleischerzeugung. Silage wird auch in landwirtschaftlichen Biogasanlagen als Substrat zur Energieerzeugung benoetigt. Die vorliegende Publikation soll der Landwirtschaft als Informationsquelle und Handlungsanleitung fuer den Bau und Betrieb von Siloanlagen und der Verwaltung als orientierende Arbeitshilfe dienen. Die Einflussgroessen auf den Anfall an Sickersaeften und die Moeglichkeiten der Vermeidung bei der Silierung und dem Silagemanagement werden dargestellt und aus umwelt- und rechtlicher Sicht bewertet.

  16. Energy use and management at large sports facilities. Load projections for the BayArena; Moeglichkeiten des Energieeinsatzes in Grosssportstaetten. Lastprognosen fuer die BayArena

    Energy Technology Data Exchange (ETDEWEB)

    Hollekamp, H. [Bayer 04 Leverkusen Fussball GmbH, Leverkusen (Germany)

    2002-05-21

    The article describes energy management aspects ensuring uninterrupted energy supply during events in the BayArena, one of Germany's most modern sports arenas and a huge soccer stadium. (orig./CB) [German] Die BayArnea in Leverkusen ist eines der modernsten Fussballstadien und erfuellt die hohe Anforderung, einen unterbrechungsfreien Spielbetrieb zu gewaehrleisten. Grosssportstaetten sind heute ein wichtiger Faktor fuer die Freizeitindustrie. Der Spielbetrieb in den Bundesligastadien benoetigt nur kurzzeitig einige MW Energie. Dabei ist allerdings eine sichere Versorgung unabdingbar. Der zu erwartende Energiebedarf sollte mit einer fundierten Lastprognose ermittelt werden. Der Verfasser beschreibt die Energieversorgung und -lastverlaeufe einer multifunktionalen Fussballarena. (orig.)

  17. CuRa: Cooperation on non-polluting resource exchange for cost reduction. Final report; CuRa: Cooperation fuer umweltschonenden Ressourcenaustausch zur Nutzung von Kostenreduktionspotenzialen. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Schoen, M.; Delahaye, F.; Hiessl, H.; Kotz, C.; Kuntze, U.; Matuschweski, A.; Schuenke, P.; Zoche, P.; Hafkesbrink, J.; Rebhan, A.; Schroll, M.

    2003-02-01

    The project CuRa: (German acronym for Cooperation for Environmentally Friendly Exchange of Resources) aimed to design elements to put into practice the model of sustainable development. The focus was on the participation of industry and business on a regional level and two model regions were chosen for the analysis of case studies. It was intended to give impulses for regional material flow networks between companies, for example by bundling similar material flows to achieve a better profitability and by one-to-one cooperation between companies, one of them using the waste of the partner as raw material. In addition, the potential for reducing material throughput using modern information technology was investigated in a case study. A set of theses derived from institutional theory was verified on the basis of the empirical results. Useful for the development and the stabilization of networks are, among others, expected economic benefits for the partners, common socio-cultural values and traditions, and using existing institutional arrangements as a basis. Different forms of market and policy failures were identified as obstacles, e.g. the established system of waste disposal services, the focus among the responsible actors on compliance with existing rules, and different regulatory obstacles. Nevertheless, in spite of the insufficient number of successful examples and demonstration projects, a shift in orientation from focusing on mere waste disposal towards a closed loop recycling economy and even towards sustainable development was identified within the commercial sector. (orig.) [German] Im Projekt CuRa: (Cooperation fuer umweltschonenden Ressourcenaustausch) sollten in zwei Modellregionen Bausteine fuer die operative Umsetzung des Leitbildes nachhaltiger Entwicklung durch regionale Akteure aus Industrie und Gewerbe entwickelt werden. Es sollte ein Anstoss zu zwischen- und ueberbetrieblicher Vernetzung von Materialfluessen sowie zu einer Umgestaltung der

  18. Agricultural ecosystem modelling. The basis for assessing the impact of possible land-use and climate changes. Final report; Agrooekosystemmodellierung. Grundlage fuer die Abschaetzung von Auswirkungen moeglicher Landnutzungs- und Klimaaenderungen. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Wenkel, K.O. [ed.; Mirschel, W. [ed.

    1995-12-31

    This report presents the results of the BMBF-sponsored project Fundamentals and models for assessing the effect of climate changes on soil, plant development and the crops of an economically significant range of farm products. Its aim was to study, by means of the results obtained for winter wheat, the dependence of plant growth on temperature, radiation and water as well as nutrient supply for other economically important crop types. Building on this, process-oriented, climate-sensitive agricultural ecosystem models for winter rye, winter barley, sugar-beet and winter intercrops were developed, verified and, in some sites, validated. First scenario calculations served to demonstrate the climate sensitivity of these models. (orig./KW) [Deutsch] Im vorliegenden Bericht werden die Ergebnisse des BMBF - Vorhabens `Grundlagen und Modelle zur Abschaetzung von Klimaaenderungen auf den Boden, die Pflanzenentwicklung sowie den verwertbaren Ernteertrag einer wirtschaftlich bedeutenden Marktfruchtfolge` vorgestellt. Ziel des Vorhabens war es, auf der Grundlage der Erkenntnisse zur Fruchtart Winterweizen die Abhaengigkeit des Pflanzenwachstums von Temperatur, Strahlung sowie Wasser- und Naehrstoffversorgung fuer weitere wirtschaftlich bedeutende landwirtschaftliche Fruchtarten zu untersuchen und auf diesen Ergebnissen aufbauend prozessorientierte klimasensitive Agrooekosystemmodelle fuer Winterroggen, Wintergerste, Zuckerrueben und Winterzwischenfruechte zu entwickeln, zu verifizieren und an einigen Standorten zu validieren. Mit Hilfe von ersten Szenariorechnungen war die Klimasensibilitaet dieser Modelle nachzuweisen. (orig./KW)

  19. 80 K - Helium circuit with innovative, gas-bearing, oil-free turbo compressor. Conception, realization, commissioning and test of the 80 K refrigeration supply for the superconducting electron source at HZB; 80 K - Helium-Kreis mit innovativem, gasgelagertem, oelfreiem Turbokompressor. Konzeption, Realisierung, Inbetriebnahme und Test der 80 K-Kaelteversorgung fuer die supraleitenden Elektronenquelle am HZB

    Energy Technology Data Exchange (ETDEWEB)

    Gloeckner, Felix [Helmholtz-Zentrum Berlin fuer Materialien und Energie GmbH, Berlin (Germany)

    2017-07-01

    The system presented in this paper supplies the test module for the superconducting electron source (GunLab) at the Helmholtz-Zentrum Berlin (HZB) with 500 W cooling capacity at 80 K.Since direct evaporation of liquid nitrogen in the module is not desirable for safety reasons, the system operates with an intermediate helium circuit. In order to use not only the latent cold of liquid nitrogen, but also the sensitive component, a new concept consisting of a dual heat exchanger and a bath cryostat is used. The coldbox also contains an adjustable bypass with integrated electric heater for test purposes.A new type of warm compressor is used to circulate the helium. The turbo compressor is oil-free, gas-stored and in helium-tight semi-hermetic design. In order to take advantage of these unique properties, Fischer Engineering AG has adapted the turbo compressor for use with helium.The paper concludes with a test of the system and an insight into the current operating experience, as well as a preview of the next, larger version of bERLinPro. [German] Die in diesem Paper vorgestellte Anlage versorgt das Testmodul fuer die supraleitende Elektronenquelle (GunLab) am Helmholtz-Zentrum Berlin (HZB) mit 500 W Kuehlleistung bei 80 K. Da eine Direktverdampfung von Fluessigstickstoff im Modul aus Sicherheitsgruenden nicht erwuenscht ist, arbeitet die Anlage mit einem Heliumzwischenkreis. Um nicht nur die latente Kaelte des fluessigen Stickstoffs, sondern auch den sensiblen Anteil zu nutzen, wird ein neues Konzept, bestehend aus einem Dualwaermeuebertrager und einem Badkryostaten verwendet. Die Coldbox enthaelt fuer Testzwecke darueber hinaus einen regelbaren Bypass mit inte-griertem elektrischem Heizer. Fuer die Umwaelzung des Heliums kommt eine neue Art eines warmen Kompressors zum Einsatz. Der Turbokom-pressor ist oelfrei, gasgelagert und in heliumdichter halb-hermetischer Bauweise ausgefuehrt. Um dessen, in dieser Leistungsklasse einzigartigen Eigenschaften zu nutzen, wurde der

  20. Brake force estimation for electromechanical vehicle brakes; Bremskraft-Rekonstruktion fuer elektromechanische Fahrzeugbremsen

    Energy Technology Data Exchange (ETDEWEB)

    Schwarz, R. [Continental Teves (Germany)

    1999-06-01

    Due to the increasing safety and comfort demands of the customer, the functionality of modern brake systems has grown continuously in the last years. However, implementation of the extended functionality in conventional brake hydraulics makes active electronic intervention necessary and therefore requires a lot of technical effort. In recent years the automotive supplier industry has started to develop brake systems which have electromechanical brake actuators generating the brake forces at the individual wheels. Electromechanically actuated wheel brakes need to be operated in a closed control loop. This paper introduces a new method to reconstruct the needed feedback value brake force from easy to measure signals. (orig.) [Deutsch] Aufgrund des gestiegenen Sicherheits- und Komfortbewusstseins der Fahrzeugkaeufer ist die Funktionsvielfalt moderner Bremssysteme in den letzten Jahren staendig gewachsen. Die Umsetzung der erweiterten Funktionalitaet mittels konventioneller Bremsenhydraulik ist jedoch durch den elektronischen, aktiven Eingriff sehr aufwendig. In den letzten Jahren hat daher die Automobilzulieferindustrie begonnen, Bremssysteme zu entwickeln, bei denen die Bremskraft an den einzelnen Raedern von elektromechanischen Bremsaktuatoren aufgebracht wird. Elektromechanisch betaetigte Radbremsen muessen im geschlossenen Regelkreis betrieben werden. Der vorliegende Beitrag, der im Rahmen einer Forschungskooperation zwischen Continental Teves und dem Institut fuer Automatisierungstechnik der TU Darmstadt entstand stellt ein Verfahren vor, mit dem die dafuer benoetigte Rueckfuehrungsgroesse `Bremskraft` aus einfach messbaren Signalen rekonstruiert werden kann. (orig.)

  1. Measurement of the reaction {gamma}d {yields}pn{pi}{sup +}{pi}{sup -} at SAPHIR and investigation of the decay angular distribution of the {Delta}{sup ++}(1232) resonance; Messung der Reaktion {gamma}d {yields}pn{pi}{sup +}{pi}{sup -} an SAPHIR und Untersuchung der Zerfallswinkelverteilung der {Delta}{sup ++}(1232)-Resonanz

    Energy Technology Data Exchange (ETDEWEB)

    Schuetz, P.

    1993-03-01

    Messungen an fluessigem Deuterium und im Anschluss daran eine Analyse der Reaktion {gamma}d {yields} pn{pi}{sup +}{pi}{sup -} unter dem Aspekt der Zerfallswinkelverteilung der {Delta}{sup ++}(1232)-Resonanz. Zur Bestimmung der Detektorakzeptanz wurde eine modellabhaengige Simulationsrechnung mit dem Programm SAPHIR-GEANT durchgefuehrt. Das benutzte Modell basiert auf dem Zuschauermodell mit einem starken Einfluss des Kontaktgraphen {gamma}d {yields} n{sub s}{Delta}{sup ++}{pi}{sup -}. Die im Modell verwendete Winkelverteilung fuer den Zerfall der {Delta}-Resonanz ist in Anlehnung an aeltere Messungen am Proton mit W(cos{theta}) = 5 - 3 * cos{sup 2}{theta}) angenommen worden. Mit diesem Modell konnten die gemessenen Daten gut beschrieben werden. Unterschiede in der Zerfallswinkelverteilung zwischen den gemessenen und berechneten Daten unter dem Winkel {theta}{sup J} {approx} 90 sind moeglicherweise ein Indiz fuer Endzustandwechselwirkungen, die im reinen Zuschauermodell nicht beruecksichtigt werden.

  2. Image quality and dose distributions of three linac-based imaging modalities

    Energy Technology Data Exchange (ETDEWEB)

    Dzierma, Yvonne; Ames, Evemarie; Nuesken, Frank; Palm, Jan; Licht, Norbert; Ruebe, Christian [Universitaetsklinikum des Saarlandes, Klinik fuer Strahlentherapie und Radioonkologie, Homburg/Saar (Germany)

    2015-04-01

    Linac-based patient imaging is possible with a variety of techniques using different photon energies. The purpose of this work is to compare three imaging systems operating at 6 MV, flattening free filter (FFF) 1 MV, and 121 kV. The dose distributions of all pretreatment set-up images (over 1,000) were retrospectively calculated on the planning computed tomography (CT) images for all patients with prostate and head-and-neck cancer treated at our institution in 2013. We analyzed the dose distribution and the dose to organs at risk. For head-and-neck cancer patients, the imaging dose from 6-MV cone beam CT (CBCT) reached maximum values at around 8 cGy. The 1-MV CBCT dose was about 63-79 % of the 6-MV CBCT dose for all organs at risk. Planar imaging reduced the imaging dose from CBCT to 30-40 % for both megavoltage modalities. The dose from the kilovoltage CBCT was 4-10 % of the 6-MV CBCT dose. For prostate cancer patients, the maximum dose from 6-MV CBCT reached 13-15 cGy, and was reduced to 66-73 % for 1 MV. Planar imaging reduces the MV CBCT dose to 10-20 %. The kV CBCT dose is 15-20 % of the 6-MV CBCT dose, slightly higher than the dose from MV axes. The dose distributions differ markedly in response to the different beam profiles and dose-depth characteristics. (orig.) [German] Linac-basierte Bildgebung zur Patientenlagerung ist mit einer Vielzahl von Techniken unterschiedlicher Photonenenergien moeglich. Ziel dieser Arbeit ist der Vergleich dreier Bildgebungssysteme mit 6 MV (Megavolt), FFF 1 MV, und 121 kV (Kilovolt). Fuer alle im Jahr 2013 an unserer Klinik behandelten Prostata- und HNO-Patienten wurden retrospektiv die Dosisverteilungen aller Verifikationsaufnahmen (ueber 1000 insgesamt) auf der Planungs-Computertomographie (CT) berechnet. Wir analysierten die Dosisverteilung und die Dosis an den Risikoorganen. Bei HNO-Patienten erreichte die Dosis von 6 MV ''Cone-beam''-CT (CBCT)Maximalwerte um 8 cGy. Mit 1 MV wird die Dosis auf 63

  3. The procedure of statutory approval including EIA for the Warndt/Luisenthal colliery; Das bergrechtliche Zulassungsverfahren mit UVP fuer das Bergwerk Warndt/Luisenthal

    Energy Technology Data Exchange (ETDEWEB)

    Matthes, U.; Wenk, N. [Prognos AG, Basel (Switzerland)

    2002-07-01

    The amendment of the Federal Mining Act (BBergG 1990) provides, concerning special mining projects, a procedure of the official approval of a plan including public participation and Environmental Impact Assessment (EIA). To fit the claim of checking all possible environmental impacts of the projects, the BBergG demands on level of the framework operating plan, that the EIA has to be more extensive and detailed, compared to former (framework operating) plans of mining projects. This commentary sets out these new professional requirements by example of a mining project with high impact on housing estate (in that on humans, cultural goods and real assets). The way, how the planning procedure was handled and the EIA, focussed on social indicators, has been carried out, contributed to a de-emotionalized dialog with the affected people. By this means solutions were found to reduce negative mining impacts. (orig.) [German] Seit der Novelle des Bundesberggesetzes (BBergG) im Jahre 1990 ist fuer bestimmte bergbauliche Vorhaben ein Planfeststellungsverfahren mit Oeffentlichkeitsbeteiligung und Umweltvetraeglichkeitspruefung (UVP) vorgeschrieben. Die Regelungen des BBergG verlangen bei der UVP wegen des Anspruchs, alle moeglichen Umwelteinwirkungen des Vorhabens bereits auf der Ebene des Rahmenbetriebsplanes einer umfassenden und abschliessenden Betrachtung zu unterziehen, eine gegenueber Rahmenbetriebsplaenen herkoemmlicher Art betraechtliche Untersuchungs- und Prueftiefe. Am Beispiel eines beantragten Abbauvorhabens, das grossflaechig besiedeltes Gebiet beruehrt, wird die Vorgehensweise dargestellt. Besonderes Schwergewicht lag, dem Vorhaben entsprechend, auf den bergbaulichen Auswirkungen auf die UVP-Schutzgueter 'Mensch' sowie 'Kultur- und sonstige Sachgueter'. Die Verfahrensberatung sowie die strukturierte und sachgerechte Analyse und Aufbereitung der Umweltwirkungen haben dazu beigetragen, den Dialog mit den Betroffenen zu versachlichen und gemeinsam

  4. Optimisation of the energy potential of low-CO2 gas turbines by using large monocrystal turbine blades. Final report; Optimierung des Energiepotentials fuer CO{sub 2}-arme Gasturbinen durch grosse Einkristall-Turbinenschaufeln. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Grossmann, J.

    2002-07-01

    Apart from the experimental identification and assessment of process characteristics during industrial-scale application of the so-called liquid metal cooling (LPC) process, the project focused on the characterisation of monocrystalline, directionally solidified materials and components. This involved the construction and commissioning of appropriate production and test aggregates, i.e. the LMC casting system and a Laue orientation testing unit, as well as the modification of a vacuum heat treatment furnace to meet the specific requirement of glow annealing of monocrystalline, directionally solidified turbine blades. [German] Das Ziel des Forschungsvorhabens (Laufzeit: 01. Juli 1997 bis 31. Dezember 2001) 'Optimierung des Energiepotentials fuer CO{sub 2}-arme Gasturbinen durch grosse Einkristall-Turbinenschaufeln' lag neben der experimentellen Bestimmung und Bewertung von Verfahrens- und Prozesskennwerten bei der industriellen Umsetzung des sogenannten Liquid-Metal-Cooling-Verfahrens (LMC) in der Eigenschaftscharakterisierung von einkristallin-gerichtet erstarrten Proben und Bauteilen, die mittels dieser neuartigen Giesstechnologie dargestellt wurden. Grundvoraussetzung fuer die umfassende Bearbeitung der o.g. Arbeitsinhalte war die Konstruktion und Inbetriebnahme der notwendigen Fertigungs- und Pruefaggregate, d.h. der LMC-Giessanlage und einer Laue-Orientierungspruefeinrichtung bzw. der Abstimmung eines Vakuum-Waermebehandlungsofens auf die spezifischen Anforderungen der Loesungsgluehung einkristallin-gerichtet erstarrter Turbinenlaufschaufeln. (orig.)

  5. Energy study 2007 for the German state of Sachsen-Anhalt. Published on behalf of the Minister of Economy and Labour of Sachsen-Anhalt; Energiestudie 2007 fuer das Land Sachsen-Anhalt. Untersuchung im Auftrag des Ministeriums fuer Wirtschaft und Arbeit des Landes Sachsen-Anhalt

    Energy Technology Data Exchange (ETDEWEB)

    Weber, A.

    2007-06-15

    The current energy concept of Sachsen-Anhalt dates back to 2004. Since then, boundary conditions have changed. International energy markets are characterized by growing demand and rising energy prices. This has influenced Germany as well. Further, sustainable power supply and global climate change have become relevant issues during the past few years. Against this background, Sachsen-Anhalt intends to modify its energy concept. The first step will be the provision of a current information and data base on all aspects of world, national and state energy supply and all relevant boundary conditions. The 'Energiestudie 2007' was prepared by Institut fuer Energetik und Umwelt gGmbH. The contents are based on current studies and investigations. The 'Energiestudie' will provide an information base which may be maintained and updated by actors of Sachsen-Anhalt. (orig.)

  6. L E E guide on electric power supply in high rise buildings. tot. rev. ed.; L E E. Leitfaden Elektrische Energie im Hochbau

    Energy Technology Data Exchange (ETDEWEB)

    Hennings, D.; Hinz, E.; Steinmueller, B.; Grossklos, M.

    2000-07-01

    Energy policy aiming at sustainability must take account of the noxious effects of fossil fuels. This guide will help to solve this problem. It is an easy to handle tool for integral planning and optimisation of electric power supply in administrative and office buildings, with a standard projecting procedure, a method for improving electric systems in buildings on the basis of characteristic values, and hints for planning and optimisation. It addresses builder owners and investors as well as architects, planners, engineers and energy consultants all of whom may be concerned in the planning of a building and its technical facilities. [German] Eine am Ziel der Nachhaltigkeit orientierte Energiepolitik muss Konsequenzen draus ziehen, dass der Einsatz der fossilen Energietraeger, auf denen unsere Energieversorgung bisher basiert, mit schaedlichen Umweltauswirkungen verbunden ist. Kohlendioxid und andere klimarelevante Spurengase heizen die Erdatmosphaere auf und drohen zur Klimakatastrophe zu fuehren; Stickoxid und Schwefeldioxid belasten mit dem sauren Regen Boden, Gewaesser und ganze Oekosysteme. Der vorliegende Leitfaden 'Elektrische Energie im Hochbau' will hier Abhilfe schaffen. Er stellt ein gut zu handhabendes Werkzeug dar, mit dessen Hilfe eine integrale Planung und Optimierung des rationellen Einsatzes elektrischer Energie in Dienstleistungsgebaeuden moeglich ist. Inhalte des Leitfadens sind die Darstellung des Planungsablaufs, ein Kennwertverfahren zur Verwertung und Verbesserung von elektrischen Anwendungen im Gebaeudebereich als Massnahme zur Investitions- und Betriebskostenreduzierung sowie Hinweise fuer Planung und Optimierung. Der Leitfaden richtet sich sowohl an die Bauherren bzw. Investoren als auch die an der Gebaeude- und Technikplanung Beteiligten, also die Architekten, Planer, Ingenieure und Energieberater. (orig.)

  7. Simulation, evaluation and optimization of hydrological storage systems; Simulation, Bewertung und Optimierung von Betriebsregeln fuer wasserwirtschaftliche Speichersysteme

    Energy Technology Data Exchange (ETDEWEB)

    Lohr, H.

    2001-07-01

    The investigation focused on controlled hydrological storage system. Existing operating schedules and new control options were analyzed, classified and generalized in order to obtain a standardized terminology and operating concept. This generalized approach will do away with the need for system-specific analyses and models for every single new system. [German] Der Schwerpunkt dieser Arbeit ist der wasserwirtschaftliche Betrieb von regelbaren Speichersystemen und ihre Simulation. Dabei bestand das Ziel darin, bestehende Betriebsplaene und neue praktikable Steuerungsmoeglichkeiten zu analysieren, zu klassifizieren und so zu generalisieren, dass eine einheitliche Terminologie und Konzeption zum Betrieb von Speichern entstand. Dieses Konzept erlaubt, in Verbindung mit den Prinzipien aus der Modellierung von Flussgebieten, verschieden strukturierte Speichersysteme mit unterschiedlichsten Steuerungsvorschriften abzubilden. Damit erhaelt man den Vorteil einer generalisierten Anwendung im Gegensatz zu einer fuer den speziellen Fall konzipierten und nicht uebertragbaren Einzelloesung. Als Folge davon entfaellt das systemspezifische, je nach Aufgabenstellung neu zu entwerfende und zu programmierende Einzelmodell. (orig.)

  8. Multi utility - a successful conception for energy supply companies?; Multi-Utility - Erfolgskonzept fuer Energieversorger? Zusammenwachsen der Maerkte

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, C. [LBD-Beratungsgesellschaft mbH, Berlin (Germany)

    2003-06-02

    Multi-utility is seen as the most promising marketing strategy for energy companies. In the future, experts say, only the combined supply of electricity, natural gas, water, waste management and services will allow companies to grow. But are today's multi-utility-products answering the needs of the customers? The author goes further into this question and finds the answer: Multi-utility needs to be further developed. Only products from growth and competition markets can generate additional margins. (orig.) [German] Multi-Utility gilt als die Marketingstrategie fuer Energieversorger. Nur wer zukuenftig Strom, Gas, Wasser, Entsorgung und Service aus einer Hand anbietet, heisst es in der Branche, kann im Markt wachsen. Doch inwieweit entspricht das heutige Multi-Utility-Angebot wirklich dem Kundenbeduerfnis? Die Verfasserin geht dieser Frage nach und kommt zu dem Schluss: Die Multi-Utility-Palette muss weiterentwickelt werden. Nur mit Produkten aus Wachstums- und Wettbewerbsmaerkten kann zusaetzliche Marge generiert werden. (orig.)

  9. Numeric models of distributed power generators and stores and their adaptation to the simulation softwaare (e.g. System NETOMAC). Simulation models for long-term operation. Project 5: Numeric models. Final report; Numerische Modelle der dezentralen Energieerzeuger und Speicher, und ihre Anpassung an die Simulationssoftware (u.a. System NETOMAC). Simulationsmodelle fuer den Langzeitbereich. Teilprojekt 5: Numerische Modelle. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Orths, A.; Bachry, A.; Lebioda, A.; Purmann, M.

    2003-09-01

    In the key project 'EDISON', new technologies for electric power supply are investigated systematically. This comprised the development of mathematical models for commercial planning software (NETOMAC) for different decentral power generation systems like cogeneration systems, wind power systems, PV systems and fuel cells. The models will provide integration scenarios including sites for optimal network integration, optimisation of network operation, and network feedback effects. Prior to the start of the project, the available planning software did not include such models, so that the effects of decentral power generation and storage systems in electric power supply grids could not be investigated. (orig.) [German] Im Leitprojekt 'EDISON' wird der Einsatz neuer Technologie in elektrischen Energieversorgungsnetzen systemtechnisch untersucht. Dafuer werden sowohl fuer verschiedene Speicher wie Batteriespeicher, als auch unterschiedliche dezentrale Erzeugungseinheiten wie BHKW, Windkraftanlagen, Photovoltaikanlagen und Brennstoffzellen mathematische Modelle fuer uebliche Planungssoftware (NETOMAC) erarbeitet. Mit den Modellen sollen Einsatzszenarien fuer diese Betriebsmittel abgeleitet und anhand dynamischer Simulationsrechnungen Standorte der optimalen Netzanbindung, die Optimierung des Netzbetriebs und Netzrueckwirkung untersucht werden koennen. Vor Beginn des Projektes fehlten entsprechende Modelle in vorhandener Planungssoftware, so dass die Wirkung von dezentralen Erzeugern und Speichern in elektrischen Energieversorgungsnetzen nicht untersucht werden konnte. (orig.)

  10. National climate goals. Hurdle and opportunity for a climate consensus; Nationale Klimaziele. Huerde und Chance fuer einen Klimakonsens

    Energy Technology Data Exchange (ETDEWEB)

    Bettzuege, Marc Oliver [Koeln Univ. (Germany). Energiewirtschaftliches Inst. (ewi)

    2018-01-15

    In the area of climate and energy policy, exploratory talks over the past few months have shown how important a common target architecture is as a compass for the coming legislative period. Three different levels can be distinguished: Paris (and thus Europe), Germany, sectors in Germany. Finding a balanced climate policy solution requires more exchange of views and less political dirigisme. In a dialogue between state and economy development paths could be spelled out together. [German] Im Bereich der Klima- und Energiepolitik haben die Sondierungsgespraeche in den vergangenen Monaten gezeigt, wie wichtig eine gemeinsame Zielarchitektur als Kompass fuer die kommende Legislaturperiode ist. Drei unterschiedliche Ebenen sind hierbei zu unterscheiden: Paris (und damit Europa), Deutschland, Sektoren in Deutschland. Bei der Suche nach einer ausgewogenen klimapolitischen Loesung sind mehr Meinungsaustausch und weniger politischer Dirigismus gefragt. In einem Dialog zwischen Staat und Wirtschaft koennten Entwicklungspfade gemeinsam ausbuchstabiert werden.

  11. Energy for Germany 2000. Facts, views and positions in a global trend. Goals of the global and national policies in the 21st century: Competitive strength, assured supply, environmental compatibility; Energie fuer Deutschland 2000. Fakten, Perspektiven und Positionen im globalen Kontext. Schwerpunktthema 'Ziel globaler und nationaler Energiepolitik im 21. Jahrhundert: Wettbewerbsfaehig - versorgungssicher - umweltvertraeglich'

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    The publication is based on the publication 'Energy for Tomorrow's World - Acting Now.', which was published by the World Energy Council in 2000. It presents an analysis of the current situation and contains suggestions for actions that should be taken in the period up to 2020. While national energy policy will still be required, it can only be successful if global aspects are not neglected. This includes the consideration of the responsibility of the industrial nations for third world countries. The energy concept presented here intends to take account of the decisive global aspects. [German] Die Darstellung der globalen Aspekte stuetzt sich auf die Standortbestimmung 2000 des Weltenergierates 'Energy for Tomorrow's World - Acting Now.'. Diese Standortbestimmung unterzieht die Anfang der 90er Jahre erschienene globale Studie des Weltenergierates einer kritischen Ueberpruefung, stellt Abweichungen von den damals angenommenen Entwicklungsperspektiven fest und gibt vor allem konkrete Handlungsempfehlungen fuer die Zeit bis zum Jahr 2020, also fuer die Zeitspanne, die konkret ueberschaubar und gestaltbar ist. Die neue Standortbestimmung des Weltenergierates unterstreicht, dass nationale Energiepolitik zwar weiterhin notwendig ist, aber nur dann auf Dauer erfolgreich sein wird, wenn sie auf diese globalen Aspekte ausgerichtet ist. Dazu gehoert auch, dass westliche, entwickelte Laender sich bewusst sind, dass eine nationale Energiepolitik zu Lasten der Dritten Welt nicht nur keine Zukunft hat, sondern vor allem nicht zu verantworten ist. Dies gilt natuerlich ebenso fuer die Umweltpolitik. An diesen Massstaeben wird sich auch das konkrete Energiekonzept messen lassen muessen, das nun fuer die Bundesrepublik Deutschland auf der Basis des 'Energiedialogs 2000' erarbeitet werden soll. Mit der hier vorgelegten Publikation will das Deutsche Nationale Komitee des Weltenergierates dazu beitragen, dass in diesem Energiekonzept die

  12. Methods of heat transformation for solar facilities in buildings; Verfahren der Waermetransformation fuer die solare Gebaeudetechnik

    Energy Technology Data Exchange (ETDEWEB)

    Henning, H.M. [Fraunhofer-Inst. fuer Solare Energiesysteme, Freiburg (Germany). Gruppe Aktive Thermische Systeme; Treffinger, P. [Deutsche Zentrum fuer Luft- und Raumfahrt (DLR), Lampoldshausen (Germany). Inst. fuer Technische Thermodynamik

    1998-02-01

    Processes in which a heat pump cycle is driven by thermal energy may be defined as heat transformation processes. The technical realization of this type of processes in general is based on sorption techniques. Depending on the temperature level of the utilized heat these technologies may be used for either cooling or heating of buildings. The paper presents state-of-the-art technologies and new developments. It comprises solar cooling of buildings, utilization of environmental energy sources (earth, air) by thermal driven heat pumps and seasonal storage of solar thermal energy by means of sorption processes. (orig.) [Deutsch] Unter Waermetransformationsverfahren werden im allgemeinen Verfahren verstanden, in denen ein Waermepumpenprozess mit thermischer Energie angetrieben wird. Die technische Realisierung dieser Verfahren erfolgt ueberwiegend mit Hilfe von Sorptionsvorgaengen. Abhaengig vom Temperaturniveau des Nutzwaermestroms koennen solche Verfahren im Gebaeudebereich fuer die Kuehlung oder Heizung eingesetzt werden. Im Beitrag werden der Stand der Technik sowie neue Entwicklungen vorgestellt. Im einzelnen umfasst der Beitrag die solare Kuehlung von Gebaeuden, die Nutzung von Umweltenergie (Erdreich, Luft) mittels thermisch angetriebener Waermepumpen sowie die saisonale Speicherung von Solarenergie ueber Sorptionsprozesse. (orig.)

  13. Progress report on research and development activities of the Institut fuer Neutronenphysik und Reaktortechnik in 1980

    International Nuclear Information System (INIS)

    1981-02-01

    The Institut fuer Neutronenphysik und Reaktortechnik carries out research in nuclear enginering especially in the context of the development of sodium-cooled fast breeder reactors. The institute does theoretical and experimental work in equal shares. Most of the work is done in cooperation with other institutes and industrial groups. In the framework of the Projekt Schneller Brueter , the institute investigates the layout and safety problems, from a reactor physics point of view of large fast breeder cores. Problems concerning the effects of LWR accidents on population and environment are investigated in the Projekt Nukleare Sicherheit . To the Projekt Wiederaufarbeitung , the institute is contributing work on fuel cycle physics and the development of a suitable instrumentation. In the field of nuclear safeguards, the implementation of monitoring systems is being investigated. Research outside projects is being done on technical and physical problems of fusion by inertial confinement and application of nuclear power on the transportation sector with hydrogen as an energy source. The main results obtained in 1980 in the various projects are presented. (orig./RW) [de

  14. Management information systems for controlling in energy supply companies; Management-Informationssysteme fuer das Controlling im EVU

    Energy Technology Data Exchange (ETDEWEB)

    Crombach, U. [CFI Controlling- und Fuehrungsinformationssysteme GmbH, Bodenheim (Germany); Ruf, J. [CFI Controlling- und Fuehrungsinformationssysteme GmbH, Bodenheim (Germany)

    1997-01-27

    Todays management information systems (MIS) allow flexible use of all data existing in the company for management and controlling. Instead of using fixed (coded) reports the user can easily decide about the presented data, either consolidated or in detail. Using well known Excel as front end for presentation and analysis provides easy access for all users. The authors describe how a data model for the MIS can be designed and stored in the `data warehouse` from the various sources in the company. A few typical charts are presented. (orig.) [Deutsch] Moderne Managementinformationssysteme (MIS) ermoeglichen die flexibel Nutzung aller im Unternehmen anfallenden Informationen fuer Fuehrung und Controlling. Anders als bei festgefuegten (programmierten) Auswertungen bestimmt der Nutzer frei ueber die dargestellten Informationen. Diese koennen einfach und schnell aus allen vorhandenen Datenquellen des Unternehmens zusammengefuehrt werden. Durch Verwendung der weit verbreiteten Tabellenkalkulationsprogramme, z.B. MS-Excel, als Bedieneroberflaeche, ist die Bedienung einfach erlernbar. Die Verfasser zeigen an einem Beispiel, wie ein solches MIS als Datenmodell konzipiert, einfach konfiguriert und schliesslich als Controllinginstrument flexible herangezogen werden kann. (orig.)

  15. Monitoring with satellite data in opencast workings in the Lower Lusatian brown coal mining area; Monitoring mit Satellitendaten fuer Tagebaugebiete im Niederlausitzer Braunkohlenrevier

    Energy Technology Data Exchange (ETDEWEB)

    Pilarski, M. [uve Fernerkundungszentrum GmbH, Potsdam (Germany); Tischer, U. [Garten- und Landschaftsbau BUL-B-AUMANN GmbH, Senftenberg (Germany)

    2000-02-01

    The paper presents investigations carried out to develop a suitable tool for the determination, analysis and assessment of long-term changes in natural conditions in the region of opencast workings in the Lower Lusation brown coal mining area (Saxony, Germany). It is established that changes in nature can be defined with the aid of multitemporal data sets and remote sensing methods, using GIS (Geographical Information System) techniques. Seven Landsat-TM data sets for the period from 1985 to 1996, which were radiometrically calibrated and georeferenced, were selected to study the relationship between remotely sensed data and biotic and abiotic factors, such as habitat classification as well as soil types or ground-water levels. For this purpose the vegetation index NDVI (Normalized Differential Vegetation Index) was derived from the satellite data. Different trends estimate for the local and regional extent of changes, which are indicated by the NDVI variations, are discussed with regard to their cause and effect relations. (orig.) [German] Mit dem aus Satellitendaten abgeleiteten Vegetationsmerkmal NDVI koennen flaechendeckend Biotope charakterisiert werden. Diese als spektraler Vegetationszustand ermittelten Werte gestatten es, die interne Vegetationsstruktur einer raeumlichen Einheit und deren zeitliche Veraenderung festzustellen. Es konnte gezeigt werden, dass die Hoehe der Vitalitaetswerte in direktem Zusammenhang zu Typen von Biotopen und deren unterschiedlichen wesentlichen Standortbedingungen Boden und oberflaechennahe bindige Bildungen steht. Weiterhin wurde gezeigt, dass dieses Vegetationsmerkmal auch die langfristige generelle Wasserversorgung, repraesentiert durch monatliche Mittelwerte der Niederschlaege, widerspiegelt. Dieser Vegetationszustand ist deshalb in mehrfacher Hinsicht als ein Parameter fuer ein auf Biotope gerichtetes Monitoring geeignet. Er gestattet interne Veraenderungen von Biotopen festzustellen und er dient der Ermittlung eines

  16. Forest report 2013 for Baden-Wuerttemberg; Waldzustandsbericht 2013 fuer Baden-Wuerttemberg

    Energy Technology Data Exchange (ETDEWEB)

    Meining, Stefan [Buero fuer Umweltueberwachung, Freiburg (Germany); Wilpert, Klaus v.; Schaeffer, Juergen; Hartmann, Peter; Schumacher, Joerg; Delb, Horst; John, Reinhold [Forstliche Versuchs- und Forschungsanstalt Baden-Wuerttemberg, Freiburg im Breisgau (Germany); Hoelscher, Andrea [Agentur fuer Nachhaltige Nutzung von Agrarlandschaften, Freiburg (Germany); Augustin, Nicole [Bath Univ. (United Kingdom); Hug, Ralph

    2013-07-01

    As an essential part of forest environmental monitoring, the Forest State Report 2013 shows how environmental factors influence the development of our forests. In addition to the annual survey of the crown state, intensive land surveys were established by the country, which provide extensive results over a long period. Data on the status and growth of the tree, the nutrient cycle, the material intake, soil status, soil vegetation and meteorology, ie the dynamics of environmental changes, are collected. Fortunately, the Forest State Report in 2013 shows that the state of the forests in Baden-Wuerttemberg has slightly improved compared to the previous year. This means that the trend towards the improvement of forest conditions continues after the extreme drought year 2003. This improvement is attributable to the spring weather which is favorable to the forest as well as to a generally low occurrence of harmful insects. [German] Als wesentlicher Teil des forstlichen Umweltmonitorings zeigt der Waldzustandsbericht 2013, wie Umweltfaktoren die Entwicklung unserer Waelder beeinflussen. Ergaenzend zur jaehrlichen Erhebung des Kronenzustandes wurden durch das Land Intensivmessflaechen eingerichtet, die umfangreiche Ergebnisse ueber einen langen Zeitraum liefern. Dort werden Daten zu Baumzustand und -wachstum, Naehrstoffkreislauf, Stoffeintrag, Bodenzustand, Bodenvegetation sowie Meteorologie, also die Dynamik der Umweltveraenderungen, erhoben. Erfreulicherweise zeigt der Waldzustandsbericht 2013, dass sich der Zustand der Waelder in Baden-Wuerttemberg gegenueber dem Vorjahr leicht verbessert hat. Damit setzt sich der Trend zur Verbesserung des Waldzustandes nach dem extremen Trockenjahr 2003 weiter fort. Diese Verbesserungstendenz laesst sich auf die fuer den Wald guenstige Fruehjahrswitterung sowie auf ein allgemein geringes Vorkommen an Schadinsekten zurueckfuehren.

  17. Development and application of a NaNiCl{sub 2}-battery for industrial trucks regarding the requirements cycle life, safety and reliability. Final report; Entwicklung und Erprobung einer NaNiCl{sub 2}-Batterie fuer Flurfoerderzeuge unter besonderer Beruecksichtigung der Aspekte Lebensdauer, Sicherheit und Zuverlaessigkeit. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Boehm, H.; Beyermann, G.; Bulling, M.

    1996-07-01

    Two NaNiCl{sub 2}-battery types including the battery controller and peripheral equipment have been developed for the application in fork lift trucks and driverless transportation. The batteries have been tested and evaluated on bench testing as well as in fork lift trucks and driverless trucks in practical application. The field tests have been performed by the subcontractors Still, Mercedes-Benz and Indumat. All test results have shown that the NaNiCl{sub 2}-battery (ZEBRA-battery) is well suited for the application in industrial traction. A series development together with a cost reduction programme have to be performed ahead of the introduction of the ZEBRA-battery into the market for industrial traction batteries. (orig.) [Deutsch] Im Rahmen des Vorhabens wurden zwei NaNiCl{sub 2}-Batterietypen, eine fuer die Anwendung in Gabelstaplern, die andere fuer den Einsatz in fahrerlosen Transportsystemen (FTS), einschliesslich des Batteriesteuergeraetes und der Batterieperipherie entwickelt. Die Batterien wurden auf Teststaenden im Labor sowie in Gabelstaplern und FTS unter Praxisbedingungen erprobt. Der praktische Einsatz erfolgte bei den Unterauftragnehmern Still, Mercedes-Benz und Indumat. Die Ergebnisse haben gezeigt, dass die NaNiCl{sub 2}-Batterie (ZEBRA-Batterie) fuer die Anwendung in Gabelstaplern und FTS geeignet ist. Insbesondere wurde nachgewiesen, dass die NaNiCl{sub 2}-Batterie im Gegensatz zu anderen Batteriesystemen einen Zweischichtbetrieb von Gabelstaplern ohne Batteriewechsel ermoeglicht. Vor Einfuehrung der ZEBRA-Batterie in den Flurfoerdermarkt muss die Serienentwicklung bei gleichzeitiger Senkung der Herstellkosten durchgefuehrt werden. (orig.)

  18. Assessment of the development of a battery charging infrastructure for a redox flow battery based electromobility concept; Bewertung des Aufbaus einer Ladeinfrastruktur fuer eine Redox-Flow-Batteriebasierte Elektromobilitaet

    Energy Technology Data Exchange (ETDEWEB)

    Arpad Funke, Simon; Wietschel, Martin [Fraunhofer-Institut fuer System- und Innovationsforschung (ISI), Karlsruhe (Germany). Competence Center Energietechnologien und Energiesysteme

    2012-07-01

    Apart from the high acquisition cost, the major obstacles to widespread use of electric-powered vehicles today are long battery charging times and limited mileage. Rechargeable batteries might be a solution. The publication investigates a potential infrastructure for electric-powered vehicles based on so-called redox flow batteries. Redox flow batteries are characterized in that active materials are dissolved in liquid electrolyte and are stored outside the cell. Batteries are recharged by exchanging charged electrolyte for discharged electrolyte, which can be done in fuel stations. Redox flow batteries have the drawback of low energy and power density and were hardly ever considered for mobile applications so far. A technical analysis of RFB technology identified the vanadium oxygen redox flow fuel cell (VOFC) as a promising version. It provides higher energy density than conventional redox flow batteries, but development is still in an early stage. Assuming a 'best case' scenario, a refuelling infrastructure for VOFC vehicles was developed and compared with battery-powered vehicles (BEV) and fuel cell vehicles (FVEV). It was found that electromobility based on VOFC may be a promising alternative to current electromobility concepts. (orig./AKB) [German] Neben den Anschaffungsausgaben stehen lange Ladezeiten und eine beschraenkte Reichweite dem heutigen Einsatz von Elektrofahrzeugen oft entgegen. Eine moegliche Abhilfe koennten betankbare Batterien leisten. In der vorliegenden Arbeit soll ein moeglicher Infrastrukturaufbau fuer Elektrofahrzeuge mit sogenannten Redox-Flow-Batterien untersucht werden. Redox-Flow-Batterien besitzen die Eigenschaft, dass aktive Materialien geloest in Fluessigelektrolyten ausserhalb der Zelle gespeichert werden. Dieser Aufbau ermoeglicht das Aufladen der Batterie, indem der entladene Elektrolyt durch geladenen ausgetauscht wird. Dieser Tausch kann an einer Tankstelle durchgefuehrt werden. Ein wesentlicher Nachteil von Redox

  19. Coordinated powertrain control for automatic transmission systems - a contribution to making driving easier and reducing environmental pollution; Koordinierte Antriebsstrangsteuerung fuer automatische Getriebe - ein Beitrag zur Entlastung von Fahrer und Umwelt

    Energy Technology Data Exchange (ETDEWEB)

    Huelser, H.; Loeffler, J. [Robert Bosch GmbH, Stuttgart (Germany); Mies, M. [Adam Opel AG, Ruesselsheim (Germany)

    1999-07-01

    The contribution presents a coordinated powertrain control system for vehicles with automatic transmission. The control system is universally applicable with different types of engines and transmission systems. It works by selecting gears and engine torque according to the position of the driving pedal and thus optimizes fuel consumption, vehicle dynamics and emissions. The powertrain control system is integrated in the CARTRONIC system architecture which ensures simple, coordinated handling of all control systems of the vehicle. Together with a board network management system, it can be integrated into an overall system for optimisation of mechanical and electrical energy use in the vehicle. [German] Der Beitrag stellt eine Koordinierte Antriebsstrangsteuerung fuer Fahrzeuge mit automatischen Getrieben vor, die einen Verbrennungsmotor mit elektronischer Motorleistungssteuerung, eine automatisierte mechanische Kupplung bzw. eine Wandlerueberbrueckungskupplung, sowie das Getriebe steuert. Diese Steuerung ist fuer unterschiedliche Typen von Motoren und Getrieben universell einsetzbar. Die Antriebsstrangsteuerung interpretiert die Fahrpedalstellung als Fahrerwunsch nach einer Vortriebsleistung und setzt diese durch geeignete Auswahl von Gang und Motordrehmoment um. Durch eine Adaption der Gangauswahl an den Fahrertyp, die Fahrsituation und Umgebungsbedingungen wird ein optimaler Fahrzeugbetrieb hinsichtlich Kraftstoffverbrauch, dynamischem Fahrverhalten und Emissionen erreicht. Die Koordinierte Antriebsstrangsteuerung ist integriert in die CARTRONIC-Systemarchitektur, die den fahrzeugweiten Verbund der Steuerungs- und Regelungssysteme einfach handhabbar macht. So kann sie gemeinsam mit einem Bordnetz-Management in ein fahrzeugweites System zur Gesamt-Optimierung von mechanischer und elektrischer Energie integriert werden. (orig.)

  20. Sensitivity of MRI in detecting alveolar infiltrates. Experimental studies; Sensitivitaet der MRT fuer alveolaere Infiltrate. Experimentelle Untersuchungen

    Energy Technology Data Exchange (ETDEWEB)

    Biederer, J.; Busse, I.; Grimm, J.; Reuter, M.; Heller, M. [Kiel Univ. (Germany). Klinikum fuer Diagnostische Radiologie; Muhle, C. [Kiel Univ. (Germany). Klinik fuer Nuklearmedizin; Freitag, S. [Kiel Univ. (Germany). Inst. fuer Medizinische Informatik und Statistik

    2002-08-01

    detect pneumonia in patients. (orig.) [German] Zielsetzung: Eine experimentelle Studie zur Untersuchung des Signalverhaltens artifizieller alveolaerer Infiltrate mit T{sub 1}- und T{sub 2}-gewichteten MR-Sequenzen. Material und Methoden: 10 Lungen-Explantate von Schweinen wurden tracheal intubiert, in der kuenstlichen Thoraxhoehle eines Phantoms durch Unterdruck entfaltet und an einem klinischen Magnetresonanztomographen bei 1,5 T untersucht. Mit gezielter Instillation von 100-200 ml Gelatineloesung wurden alveolaere Infiltrate erzeugt und mit Gradientenecho- (2D-, 3D-GRE) und schnellen Spinechosequenzen (T{sub 2}-TSE, T{sub 2}-HASTE) dargestellt. Die Signalintensitaet des Lungenparenchyms nativ und mit Infiltrat wurde an repraesentativen Querschnitten erfasst. Zum Vergleich erfolgten Kontrollen mit Spiral-CT. Ergebnisse: Die instillierte Fluessigkeit simulierte alveolaere Infiltrate mit typischem Milchglasmuster im CT, wie es an Patienten mit Pneumonie oder ARDS beobachtet wird. Vor dem Versuch zeigten nur T{sub 2}-HASTE und T{sub 2}-TSE ein Lungenparenchymsignal (Signal/Rausch-Verhaeltnis von 3,62 bzw. 1,39). Nach Instillation von Fluessigkeit fand sich in diesen Sequenzen ein Signalanstieg von ca. 30% bei 100 ml (p<0,01) bzw. 60% bei 200 ml (p<0,01). Bei 2D-GRE betrug die Signalintensitaetszunahme 0,74% (p=0,32) nach 100 ml und 5,6% (p<0,01) nach 200 ml (fuer 3D-GRE 2,2% [p=0,02] bzw. 4,4% [p<0,01]). Die CT-Kontrollen zeigten fuer 100 ml eine Dichtezunahme um durchschnittlich 17 H.E. (p=0,02) und fuer 200 ml um 75 H.E. (p<0,01). Schlussfolgerungen: Mit T{sub 2}-gewichteten Sequenzen ist die MRT zur Darstellung artifizieller alveolaerer Infiltrate geeignet. (orig.)

  1. The design and numerical analysis of tandem thermophotovoltaic cells

    International Nuclear Information System (INIS)

    Yang Hao-Yu; Liu Ren-Jun; Wang Lian-Kai; Lü You; Li Tian-Tian; Li Guo-Xing; Zhang Yuan-Tao; Zhang Bao-Lin

    2013-01-01

    In this paper, numerical analysis of GaSb =(E g = 0.72 eV)/Ga 0.84 In 0.16 As 0.14 Sb 0.86 (E g = 0.53 eV) tandem thermophotovoltaic (TPV) cells is carried out by using Silvaco/Atlas software. In the tandem cells, a GaSb p-n homojunction is used for the top cell and a GaInAsSb p-n homojunction for the bottom cell. A heavily doped GaSb tunnel junction connects the two sub-cells together. The simulations are carried out at a radiator temperature of 2000 K and a cell temperature of 300 K. The radiation photons are injected from the top of the tandem cells. Key properties of the single- and dual-junction TPV cells, including I–V characteristic, maximum output power (P max ), open-circuit voltage (V oc ), short-circuit current (I sc ), etc. are presented. The effects of the sub-cell thickness and carrier concentration on the key properties of tandem cells are investigated. A comparison of the dual-TPV cells with GaSb and GaInAsSb single junction cells shows that the P max of tandem cells is almost twice as great as that of the single-junction cells. (interdisciplinary physics and related areas of science and technology)

  2. Electronic structure modeling of InAs/GaSb superlattices with hybrid density functional theory

    Energy Technology Data Exchange (ETDEWEB)

    Garwood, Tristan [Univ. of New Mexico, Albuquerque, NM (United States). Center for High Technology Materials; Modine, Normand A. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Krishna, S. [Univ. of New Mexico, Albuquerque, NM (United States). Center for High Technology Materials

    2016-12-18

    The application of first-principles calculations holds promise for greatly improving our understanding of semiconductor superlattices. By developing a procedure to accurately predict band gaps using hybrid density functional theory, it lays the groundwork for future studies investigating more nuanced properties of these structures. Our approach allows a priori prediction of the properties of SLS structures using only the band gaps of the constituent materials. Furthermore, it should enable direct investigation of the effects of interface structure, e.g., intermixing or ordering at the interface, on SLS properties. In this paper, we present band gap data for various InAs/GaSb type-II superlattice structures calculated using the generalized Kohn-Sham formulation of density functional theory. A PBE0-type hybrid functional was used, and the portion of the exact exchange was tuned to fit the band gaps of the binary compounds InAs and GaSb with the best agreement to bulk experimental values obtained with 18% of the exact exchange. The heterostructures considered in this study are 6 monolayer (ML) InAs/6 ML GaSb, 8 ML InAs/8 ML GaSb and 10 ML InAs/10 ML GaSb with deviations from the experimental band gaps ranging from 3% to 11%.

  3. Dual vehicle - Development, construction and testing of a dual vehicle for passenger transport on roads and railways. Final report; Zweiwegefahrzeug - Entwicklung, Bau und Erprobung eines Zweiwegefahrzeuges zur Personenbefoerderung Strasse/Schiene. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    This feasibility study investigated a prototype dual vehicle for railways and roads. Technical problems, acceptance specifications, legal and economic aspects were gone into. [German] Zielstellung fuer das Vorhaben war die Untersuchung ausgewaehlter technischer Fragestellungen hinsichtlich der Machbarkeit der Entwicklung und Erprobung eines Prototypes fuer ein Zweiwegefahrzeug fuer den Personenverkehr, das fuer den Einsatz auf der Schiene und der Strasse vorgesehen und dafuer entsprechend technisch ausgestattet ist. Damit erbringt das Vorhaben technisch-konstruktive Loesungsansaetze fuer ein vollstaendig neues Fahrzeuggrundkonzept und traegt hinsichtlich eines solchen zukuenftigen Fahrzeugtyps - zur Klaerung technischer Fragen (statische Zusammenbauuntersuchungen, geometrische und massliche Bedingungen sowie Konzipierung, Leistungsanforderungen der Komponenten, Konzept fuer Ein- und Ausspuren sowie fuer Ein- und Ausstieg), - zur Pruefung der technischen Zulassungsfaehigkeit des Fahrzeuges, - zur Klaerung von Rechtsfragen fuer die Sicherung des Betriebes des Fahrzeuges - sowie zum Nachweis des wirtschaftlicheren Betriebes des Fahrzeuges bei. Das Vorhaben unterbreitet unter Beruecksichtigung sicherheitstechnischer, gesetzlicher und wirtschaftlicher Rahmenbedingungen Loesungsvorschlaege fuer die konstruktive Konzipierung des Fahrgestells und ein technisches Konzept fuer das Ein- und Ausspuren fuer einen neuen Fahrzeugtyp, der sowohl fuer die Strassenbenutzung als auch fuer den Schienenverkehr zugelassen ist. (orig.)

  4. Evaluation of geological and economic conditions for the exploitation of hydrogeothermal resources; Evaluierung geowissenschaftlicher und wirtschaftlicher Bedingungen fuer die Nutzung hydrogeothermaler Ressourcen

    Energy Technology Data Exchange (ETDEWEB)

    Erbas, K; Hoth, P; Huenges, E; Schallenberg, K; Seibt, A [GeoForschungsZentrum Potsdam (Germany)

    1997-12-01

    The main aspects of the project: `Evaluation of geologic and economic conditions for utilizing low-enthalpy hydrogeothermal resources` are outlined. In this interdisciplinary project the social, economic, technological and geoscientific aspects are analyzed in terms of their complexity and their interrelations. The project will provide a basis for political decision making in the process of promoting and installing of geothermal heating plants. (orig.) [Deutsch] In dem auf drei Jahre angelegten und vom BMBF mit rund 3,6 Mio. DM gefoerderten Projekt werden die Moeglichkeiten der Nutzung niedrigthermaler Tiefenwaesser untersucht. Dadurch sollen die Voraussetzungen fuer eine breitere Umsetzung des vorhandenen Potentials an geothermischer Energie geschaffen werden. Es werden die Projektziele, die Projektstruktur, uebergeordnete Arbeitsschwerpunkte und erste Schlussfolgerungen nach einem Jahr Projektlaufzeit dargestellt. (orig.)

  5. Phased-array technology for automatic pipeline inspection; Phased Array-Technologie fuer automatisierte Pipeline-Inspektion

    Energy Technology Data Exchange (ETDEWEB)

    Bosch, J.; Hugger, A.; Franz, J. [GE Energy, PII Pipetronix GmbH, Stutensee (Germany); Falter, S.; Oberdoerfer, Y. [GE Inspection Technology Systems, Huerth (Germany)

    2004-07-01

    Pipeline inspection pigs with individual test probes are limited in their function due to the fixed arrangement of sensors on the support. In contrast, the phased-array technology enables multitasking of tests, e.g. stress and corrosion testing which formerly required two different test runs with different sensor set-ups. The angles of inclination can be adapted to the test medium, and virtual sensors can be matched in size and overlap so that, e.g., small pittings will be detected. The sensor set-up presented here enables higher test speed and improved flaw detection. The contribution describes the measuring principle, the inspection pig (UltraScan DUO), and some results of prototype measurements. [German] Pruefmolche fuer die Pipelinepruefung mit Einzelpruefkoepfen sind in ihrem Funktionsumfang aufgrund der festliegenden Anordnung der Sensoren im Sensortraeger eingeschraenkt. Die Phased-Array-Technologie gestattet die simultane Durchfuehrung verschiedener Pruefaufgaben, wie beispielsweise der Rissund der Korrosionspruefung, die vorher zwei Prueflaeufe mit verschiedenen Sensortraegern erforderten. Die Einfallswinkel koennen auf das jeweilige Medium angepasst werden, und es besteht die Moeglichkeit, virtuelle Sensoren bezueglich ihrer Groesse und der gegenseitigen Ueberlappung so anzupassen, dass beispielsweise kleine Pittings gefunden werden koennen. Die ausgefuehrte Form gestattet hoehere Pruefgeschwindigkeit und verbesserte Fehlerauffindung. In diesem Artikel werden das Messprinzip und der Inspektionsmolch (UltraScan DUO) beschrieben sowie einige Prototyp-Messergebnisse vorgestellt.

  6. Modern magnetic resonance imaging of the liver; Modernes MR-Protokoll fuer die Leberbildgebung

    Energy Technology Data Exchange (ETDEWEB)

    Hedderich, D.M.; Maintz, D.; Persigehl, T. [Universitaetsklinikum Koeln, Institut fuer Diagnostische und Interventionelle Radiologie, Koeln (Germany); Weiss, K. [Universitaetsklinikum Koeln, Institut fuer Diagnostische und Interventionelle Radiologie, Koeln (Germany); Philips Healthcare Deutschland, Hamburg (Germany)

    2015-12-15

    Magnetic resonance imaging (MRI) of the liver has become an essential tool in the radiological diagnostics of both focal and diffuse diseases of the liver and is subject to constant change due to technological progress. Recently, important improvements could be achieved by innovations regarding MR hardware, sequences and postprocessing methods. The diagnostic spectrum of MRI could be broadened particularly due to new examination sequences, while at the same time scanning time could be shortened and image quality has been improved. The aim of this article is to explain both the technological background and the clinical application of recent MR sequence developments and to present the scope of a modern MRI protocol for the liver. (orig.) [German] Die Magnetresonanztomographie (MRT) der Leber ist in der radiologischen Diagnostik fokaler und diffuser Lebererkrankungen fest etabliert und untersteht einem steten Wandel durch den fortwaehrenden technischen Fortschritt. Durch Neuerungen bei der Hardware, den Sequenzen und der Bildnachverarbeitung konnten in den letzten Jahren deutliche Fortschritte erzielt werden. Insbesondere auf dem Gebiet der Untersuchungssequenzen kam es zu Entwicklungen, die das diagnostische Spektrum der MRT erweiterten, zu einer Verkuerzung der Scanzeit fuehrten und zu einer Verbesserung der Bildqualitaet beitrugen. Gegenstand dieses Artikels ist es, den technischen Hintergrund und die klinische Anwendung neuerer Sequenztechniken zu erklaeren und so die Moeglichkeiten und den Umfang eines modernen MRT-Untersuchungsprotokolls fuer die Leber darzustellen. (orig.)

  7. Hormonally active substances in the environment: Xeno-estrogens. Opinion of an expert commission of the Toxicology Section of Deutsche Gesellschaft fuer experimentelle und klinische Pharmakologie und Toxikologie (DGPT); Hormonell aktive Substanzen in der Umwelt: Xenooestrogene. Stellungnahme der Beratungskommission der Sektion Toxikologie der Deutschen Gesellschaft fuer Experimentelle und Klinische Pharmakologie und Toxikologie (DGPT)

    Energy Technology Data Exchange (ETDEWEB)

    Degen, G.H.; Foth, H.; Kahl, R.; Kappus, H.; Neumann, H.G.; Oesch, F.; Schulte-Hermann, R. [Dortmund Univ. (Germany). Inst. fuer Arbeitsphysiologie

    1999-12-01

    Observations of disturbances in the hormonal regulation mechanisms of humans and animals raised an interest in the potential hazards of environmental pollutants with hormonal, in particular estrogenic activity. The available information on the mode of action, dose dependence and exposure pathways (exposure scenarios) suggests that the hazard to humans may be low. On the other hand, the exotoxicological effects are less easily assessible, and further investigations will be required for a well-founded risk characterisation and assessment. There are now many research programmes in this field in various countries including Germany. For example, there are projects concerning 'Environmental chemicals affecting the endocrineous system (environmental hormones)' which are funded by the German state (German Bundestag 1998) and several projects funded by the Association of the Chemical Industry and various German states. Further information on terminated and current projects is available from the Federal Environmental Office where the national activities are coordinated. [German] Beobachtungen ueber die Beeinflussung hormoneller Regulationsmechanismen bei Mensch und Tier haben die Aufmerksamkeit auf eine moegliche Gefaehrdung durch Umweltstoffe mit hormoneller, insbesondere solche mit oestrogener Aktivitaet gelenkt. Die verfuegbaren Informationen ueber Wirkungsweise, Dosisabhaengigkeit und Art der Exposition (Expositionsszenarien) lassen das Ausmass der Gefaehrdung fuer den Menschen gering erscheinen. Die oekotoxikologischen Auswirkungen sind demgegenueber weniger klar. Fuer eine fundierte Risikocharakterisierung und Risikoabschaetzung sind weitgehende Untersuchungen erforderlich. Dem tragen zahlreiche Forschungsprogramme in verschiedenen Laendern Rechnung. Auch in Deutschland wird Forschung auf diesem Gebiet unterstuetzt. Zum Beispiel: etliche Vorhaben zum Thema ''Chemikalien in der Umwelt mitWirkung auf das endokrine System (Umwelthormone

  8. The production phase model as a tool for analysing and structuring the database of an operation management system; Das Phasenmodell der Produktion als ein Werkzeug fuer Analyse und Strukturierung der Datenbasis eines Betriebsmanagementsystems

    Energy Technology Data Exchange (ETDEWEB)

    Rauprich, G.; Polke, B.

    1997-12-31

    This paper presents a process analysis which was carried out with the aid of a phase model for the purpose of supporting the start-up phase of an operation management system. Beside providing a functional structure for the database this process analysis permits a functional and consistent representation of the process at as crude or detailed a level as desired. In this way the phase model supplies a functional model of the process which serves the purposes of both the process control and the operation control level. Once the phase model has been created it largely only depends on the question being asked which level of detail and what properties of the relevant process elements and material and energy flows are used. [Deutsch] Eine mit Hilfe des Phasenmodells durchgefuehrte Prozessanalyse unterstuetzt die Einfuehrungsphase eines Betriebsmanagementsystems. Sie gibt eine funktionale Struktur der Datenbank vor und erlaubt darueberhinaus auf der Ebene des Betriebsmanagementsystems eine funktionale, konsistente, beliebig grobe oder feine detaillierte Darstellung des Prozesses. Die Phasenmodellierung liefert damit sowohl fuer die Prozessleitebene als auch fuer die Betriebsleitebene ein ganzheitliches, funktionales Modell des Prozesses. Wenn das Phasenmodell erst einmal erstellt ist, ist es im wesentlichen nur abhaengig von der Fragestellung, welche Detaillierungsebenen mit welchen Eigenschaften der relevanten Prozesselemente und Material-/Energiestroeme verwendet werden. (orig./RHM)

  9. Sustainable design, construction and living in the information age; Nachhaltiges Planen, Bauen und Wohnen im Informationszeitalter

    Energy Technology Data Exchange (ETDEWEB)

    Bretthauser, G.; Dietze, S.; Haefele, K.H.; Isele, J.; Jaekel, J.

    2001-06-01

    prefabricated wall elements, of components for building design tools, for the information exchange between computer-aided design and computer-aided manufacturing, for the integration of home automation systems in the product model, of user interfaces and user adaptation of SmartHomes. Finally, possibilities of linking-up with R and D projects from other institutes in the Forschungszentrum Karlsruhe and potential external partners for cooperation are mentioned. (orig.) [German] Die vorliegende Studie widmet sich der Thematik des nachhaltigen Planens, Bauens und Wohnens im Informationszeitalter. Der Fokus liegt dabei, entsprechend der Aufgabengebiete und Kompetenzfelder des IAI, auf dem Beitrag der Informations- und Automatisierungstechnik. Die Studie basiert auf umfangreichen Recherchen, den Erfahrungen der Autoren und ersten Vorversuchen. Ihr Anliegen ist es, nach der Analyse des Entwicklungsstandes und der Entwicklungstrends Schlussfolgerungen fuer eigene F and E-Vorhaben zu ziehen. Die allgemeinen Rahmenbedingungen fuer zukuenftiges ''Bauen und Wohnen'' werden insbesondere unter dem Gesichtspunkt der Nachhaltigkeit praesentiert. Wichtige Fragestellungen innerhalb der sozialen, wirtschaftlichen und oekologischen Dimension eines nachhaltigen ''Bauens und Wohnens'' werden im Rahmen dieser Studie allerdings nur angerissen. Die Analyse des Entwicklungsstands und der Entwicklungstendenzen konzentriert sich auf drei Bereiche, den Einsatz der Informationstechnologie insbesondere in der Planungs- und Entwurfsphase, der automatisierten Fertigung und der Hausautomatisierung. Generell kann festgestellt werden, dass der verstaerkte Einsatz der Informations- und Automatisierungstechnik im Bereich ''Bauen und Wohnen'' ein grosses Innovationspotenzial birgt. Wichtige Tendenzen sind im Bereich Planung die Entwicklung von Standards fuer Produktdatenmodelle und die Nutzung von digitalen Gebaeudemodellen in allen Lebenszyklusphasen. Im

  10. German RPV safety assessment. Underpinning of the procedure by complementary test results measured in the hot cells; Der deutsche RDB-Sicherheitsnachweis. Untermauerung der Vorgehensweise durch ergaenzende Kennwertermittlung in den Heissen Zellen

    Energy Technology Data Exchange (ETDEWEB)

    Keim, Elisabeth; Hein, Hieronymus; Gundermann, Arnulf [AREVA NP GmbH (Germany); Hoffmann, Harald [VGB (Germany); Koenig, Guenter; Ilg, Ulf [EnBW (Germany); Nagel, Gerhard [e-on Kernkraft (Germany); Widera, Martin [RWE (Germany); Rebsamen, Daniel [KKW Goesgen (Germany)

    2008-07-01

    adequate for T0 determination and show a tendency toward lower values than compact specimens. The measured crack arrest fracture toughness values are mostly enveloped by the lower-bound ASME KIa curve. [German] Das in Deutschland anzuwendende Vorgehen beim Sicherheitsnachweis fuer Reaktordruckbehaelter ist in der Regel KTA 3201.2 festgelegt. Es basiert zum Teil auf einem in den USA in den 70iger Jahren entwickelten rein deterministischen Konzept. Die Materialkennkurve wird darin mit Hilfe der RTNDT (Referenztemperatur) indiziert, die mittels mechanisch-technologischer Versuche bestimmt wird. Der Vergleich mit den Bruchmechanikkennwerten zeigt, dass die KIc(T-RTNDT)-Kurve die experimentellen Daten einhuellt. Weltweit sind Bestrebungen im Gange, neben dem bewaehrten RTNDT-Konzept ein auf bruchmechanischen Kennwerten basierendes Konzept einzufuehren. Ein wesentlicher Vorteil des neuen Konzepts besteht darin, dass es eine direkte Ermittlung der Sproedbruchuebergangstemperatur aus bruchmechanischen Versuchen und damit eine realistischere Uebertragung auf das Bauteilverhalten ermoeglicht. Um die Einfuehrung des Master-Kurve-Konzeptes in die Integritaetsbewertung des RDB in Deutschland voranzubringen, sind noch eine Reihe von offenen Fragestellungen wie z.B. die Bezugnahme auf eine repraesentative Datenbasis fuer bestrahlte deutsche RDB-Werkstoffe und der Einfluss der Probenform- und groesse zu klaeren. Es besteht weiterhin die Notwendigkeit, das bestehende mit dem neuen Konzept zu vergleichen und die Frage zu klaeren, inwieweit Crack Arrest Kurven an bestrahltem Werkstoff erstellt werden koennen und wie sich Crack Arrest in das neue Sicherheitskonzept integrieren lasst. Im Rahmen des Vorhabens CARISMA wurde eine Datenbasis zur Charakterisierung der Bruchzaehigkeit von vorbestrahlten originalen RDB Werkstoffen erstellt, die fuer alle vier deutschen DWR-Baulinien repraesentativ sind. Das RTNDT- und das Master- Kurve-Konzept wurden bei der Bewertung der generierten Daten angewendet

  11. FUeW opts for wireless centralised ripple control systems; Das FUeW entscheidet sich fuer Funk-Rundsteuerung

    Energy Technology Data Exchange (ETDEWEB)

    Fuchs, G [Fraenkische Ueberlandwerk AG, Nuernberg (Germany); Saupe, R [EFR Europaeische Funk-Rundsteuerung GmbH, Berlin (Germany)

    1996-01-15

    After extensive trials in the course of a project study Fraenkische Ueberlandwerk AG (FUeW) has decided to introduce a wireless centralised ripple control system for its entire service area. The system will initially be used for synchronising and parameterising multiple tariff meters. Ripple control receivers are to take over the function formerly perfomed by switch clocks of switching between night and day tariff. FUeW`s decision was essentially motivated by the proven reliability of wireless centralised ripple control systems and by the economic advantages of this modern technology. (orig.) [Deutsch] Die Fraenkische Ueberlandwerk AG (FUeW), Nuernberg, hat nach umfangreichen Versuchen im Rahmen einer Projektstudie entschieden, die Funk-Rundsteuerung flaechendeckend im Versorgungsgebiet einzusetzen. Das System wird zunaechst zur Synchronisierung und Parametrierung von Mehrtarifzaehlern angewendet. Wurde bisher die HT/NT-Umschaltung der Zaehler durch Schaltuhren durchgefuehrt, so wird kuenftig ein Funk-Rundsteuerempfaenger diese Aufgabe uebernehmen. Wesentlich fuer die Entscheidung des FUeW waren die bewiesene Funktionssicherheit der Funk-Rundsteuerung und die wirtschaftlichen Vorteile, die sich durch den Einsatz dieser modernen Technik ergeben. (orig.)

  12. Planning of digital building automation. Fundamentals of system and constructor selection, construction, acceptance testing and billing; Die Planung der digitalen Gebaeudeautomation. Grundlage fuer Systemfestlegung, Vergabe, Ausfuehrung, Abnahme und Abrechnung

    Energy Technology Data Exchange (ETDEWEB)

    Otto, J. [Ingenieurbuero Dr. Ellrich und Partner, Muenchen (Germany)

    1995-12-31

    In chapter 6 of the anthology about building control the planning of digital building automation is described. The basics for the system arrangements are presented such as award, construction, inspection approval, and cashing up. Major points are quality criteria as well as the separation of the performance ranges. (BWI) [Deutsch] Kapitel 6 des Sammelbandes ueber Building Control ist der Planung der digitalen Gebaeudeautomation gewidmet. Es werden dabei Grundlagen fuer die Systemfestlegung vorgestellt sowie Vergabe, Ausfuehrung, Abnahme und Abrechnung diskutiert. Wesentliche Punkte sind dabei Qualitaetskriterien sowie die Abgrenzung der Leistungsbereiche. (BWI)

  13. Juwele in XML

    OpenAIRE

    Habekost, Engelbert

    2005-01-01

    In der Forschungsabteilung der Humboldt-Universität wird die Schriftenreihe »Öffentliche Vorlesungen« seit 2002 mit der Software FrameMaker produziert. Verbunden damit war die Umstellung des Produktionsprozesses auf eine XML-basierte Dokumenterstellung sowie die Inhouse-Betreuung der kompletten Druckvorstufe.

  14. Combined functional and morphological imaging of sarcomas. Significance for diagnostics and therapy monitoring; Kombinierte funktionelle und morphologische Bildgebung bei Sarkomen. Stellenwert fuer Diagnostik und Therapiemonitoring

    Energy Technology Data Exchange (ETDEWEB)

    Schramm, N.; Rist, C.; Reiser, M.F.; Berger, F. [Klinikum der Ludwig-Maximilians-Universitaet Muenchen, Campus Grosshadern, Institut fuer Klinische Radiologie, Muenchen (Germany); Schlemmer, M.; Issels, R. [Klinikum der Ludwig-Maximilians-Universitaet Muenchen, Campus Grosshadern, Medizinische Klinik und Poliklinik III, Muenchen (Germany)

    2010-04-15

    . Ein Staging von Sarkompatienten einschliesslich der Erfassung von Lungenmetastasen ist damit in einem Untersuchungsgang moeglich. Die PET/CT wird bei Patienten mit primaer ossaeren und Weichteilsarkomen zur Diagnosestellung, zum Staging und Restaging, zum ''metabolischen Tumorgrading'', zur Biopsieplanung, zum Rezidivnachweis sowie zum Therapiemonitoring eingesetzt. Es konnte gezeigt werden, dass der FDG-Uptake des Tumors vor Therapie sowie die Aenderungen im FDG-Uptake nach Therapie signifikant mit der histopathologischen Response und dem Ueberleben der Patienten korrelieren. Damit ermoeglichen PET und PET/CT auch prognostische Aussagen. Neue Perspektiven der Hybridbildgebung mit der PET/CT ergeben sich durch die Etablierung neuer Radiotracer sowie durch die kombinierte Untersuchung von Tumormetabolismus und -perfusion. Die hochaufloesende MRT bleibt fuer die lokale Primaerdiagnostik sowie zur praeoperativen Planung mit Klaerung der exakten anatomischen Situation und moeglicher Infiltration vaskulaerer oder nervaler Strukturen weiter unverzichtbar. Die kontrastverstaerkte MRT ist ein wichtiges und gut verfuegbares Alternativverfahren zur Rezidivdiagnostik, ganz besonders fuer nichthypermetabole Tumoren. Dynamische, kontrastverstaerkte MRT-Sequenzen gewinnen fuer das Therapiemonitoring zunehmend an Bedeutung und sollten in prospektiven Studien mit der FDG-PET/CT korreliert werden. (orig.)

  15. General needs assessment: Besteht Interesse an Fortbildung in Evidenz-basierte Medizin? Eine Umfrage unter Lehrärzten für Allgemeinmedizin [General needs assessment for an evidence-based medicine curriculum - a survey among general practitioners involved in teaching

    Directory of Open Access Journals (Sweden)

    Moßhammer, Dirk

    2010-02-01

    performed to check whether a course can be financed with the fee found acceptable.[german] Einleitung: Praxis- und patientenorientierte EbM (Evidenz-basierte Medizin-Curricula können die Patientenversorgung verbessern. Curriculums-Entwicklung in der Medizin basiert auf einem Qualitätssicherungsprozess mit initialer Bedürfnisanalyse der Beteiligten. Es ist nicht bekannt, ob bei niedergelassenen Allgemeinmedizinern überhaupt Interesse an Fortbildung in EbM besteht. Ziel der Untersuchung war es deshalb, die quantitative und qualitative Interessenlage von Lehrärzten der Allgemeinmedizin für Fortbildung in EbM zu erheben. Methodik: Alle 202 Lehrärzte unserer Fakultät wurden in einer freiwilligen, anonymisierten und standardisierten Briefumfrage zu ihrem Interesse an einem EbM-Curriculum, ihren favorisierten Themen und ihren Vorschlägen sowie zu Zeitaufwand und Teilnahmekosten befragt. Ergebnisse: Die Rückantwortrate lag bei 70 Prozent (n=141. Von diesen bekundeten 64 Prozent (n=90 Interesse an einem EbM-Curriculum, 23 Prozent (n=33 kein Interesse und 13 Prozent (n=18 Unentschlossenheit. Die am meisten favorisierten Themen waren „Leitlinien“ (64 Prozent, n=69, „Meta-Analysen“ (60 Prozent, n=65, „Kritisches Lesen“ (54 Prozent, n=58 und „Recherche-Fragen stellen“ (49 Prozent, n=53. Die Großteile der insgesamt 43 Vorschläge betrafen Kursthemen (z. B. Arzt-Patient-Interaktion, sozial-ethische Aspekte, Gesundheitsökonomie, Prävention und Lehrmethoden (regelmäßiges Angebot, Internet-Plattform, e-learning, Vorträge, Fallbeispiele, eigene Referate. Fast 40 Prozent jener Lehrärzte, die Angaben zur Zeitaufwendung machten (n=83, wünschen höchstens bis zu sechs bis acht Stunden Fortbildung in EbM (n=33. Andererseits gab rund ein Drittel (n=27 an, dass ein EbM-Curriculum kontinuierlich (also in regelmäßigen Abständen angeboten werden sollte. Vierundsechzig Prozent der Lehrärzte, die Angaben zu Teilnehmerbeiträgen machten (n=77, wären bereit, h

  16. Thermotropic layers for glazing of windows, facades and solar collectors. Final report; Thermotrope Systeme fuer Verglasung von Fenstern, Fassaden und Solarkollektoren. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Jahns, E.; Gerst, M.; Nitz, P. [BASF AG, Ludwigshafen am Rhein (Germany); Grochal, P.; Raicu, A. [Sto AG, Stuehlingen (Germany); Blessing, R.; Wilson, H.R. [INTERPANE Entwicklungs- und Beratungsgesellschaft mbH und Co. KG, Lauenfoerde (Germany); Wittwer, V.; Fuchs, K. [Fraunhofer-Institut fuer Solare Energiesysteme (ISE), Freiburg im Breisgau (Germany)

    1997-02-01

    Increased use of solar energy is needed to save heating energy. In the German climate, however, passive use of solar energy with windows and facades in summer is also accompanied by the risk of overheating the living areas. Simple, automatically regulating systems to protect against overheating are not commercially available at present. The project, `Thermotropic Layers for Glazing of Windows, Facades and Solar Collectors`, aimed to develop thermotropic shading systems for windows, facades and solar collectors. Thermotropic hydrogels and polymer blends were developed, large-area samples produced and characterised under practice-relevant conditions. Building simulations proved that with the help of the polymer systems developed, heating costs can be saved by passive use of solar energy. The knowledge gained has not yet resulted in a commercially marketable product. Processing of large-area products and lifetime testing could not be brought to completion within the project duration. The project partners have thus lodged an application for funding by BMBF (German Ministry for Education, Science, Research and Technology) to continue the work. (orig.) [Deutsch] Zur Heizkostenersparnis ist der verstaerkte Einsatz von Sonnenenergie notwendig. In unserem Klima birgt die passive Nutzung von Sonnenenergie ueber Fenster und Fassaden im Sommer aber die Gefahr der Ueberhitzung der Wohnraeume. Einfache, selbstregelnde Systeme als Ueberhitzungsschutz sind zur Zeit am Markt nicht erhaeltlich. Das Projekt `Thermotrope Schichten fuer Verglasung von Fenstern, Fassaden und Solarkollektoren` hatte die Entwicklung von thermotropen Abschattungssystemen fuer Fenster, Fassaden und Sonnenkollektoren zum Ziel. Es wurden thermotrope Hydrogele und Polymerblends entwickelt, flaechige Muster hergestellt und in anwendungsnahen Pruefungen charakterisiert. Gebaeudesimulationen erbrachten den Nachweis, dass mit den entwickelten Polymersystemen eine Heizkostenersparnis durch passive

  17. Electron irradiated liquid encapsulated Czochralski grown undoped gallium antimonide studied by positron lifetime spectroscopy and photoluminescence

    International Nuclear Information System (INIS)

    Ma, S K; Lui, M K; Ling, C C; Fung, S; Beling, C D; Li, K F; Cheah, K W; Gong, M; Hang, H S; Weng, H M

    2004-01-01

    Electron irradiated undoped liquid encapsulated Czochralski (LEC) grown GaSb samples were studied by positron lifetime spectroscopy (PLS) and photoluminescence (PL). In addition to the 315 ps component reported in the previous studies, another defect with a lifetime of 280 ps was also identified in the present electron irradiated samples. The bulk lifetime of the GaSb material was found to be 258 ps. The V Ga,280ps and the V Ga,315ps defects were associated with two independent Ga vacancy related defects having different microstructures. The well known 777 meV PL signal (usually band A) was also observed in the electron irradiated undoped GaSb samples. The band A intensity decreases with increasing electron irradiation dosage and it disappears after the 300 deg. C annealing regardless of the irradiation dosage. The origin of the band A signal is also discussed

  18. Short and long term supply curves for crude oil and the consequences for the market; Kurz- und langfristige Angebotskurven fuer Rohoel und die Konsequenzen fuer den Markt

    Energy Technology Data Exchange (ETDEWEB)

    Schlothmann, Daniel

    2016-03-08

    In this work, supply curves for 22 major oil producing countries were identified and then aggregated into global supply curves. According to the identified supply curves, almost all oil-producing oil projects currently under development in the study countries are also profitable at the current oil price of $ 35 to $ 40 per barrel, taking short-term marginal costs into account. However, if the price of oil remains at this level in the coming years, a supply bottleneck on the global oil market will occur until 2024, as the development of cost-intensive, unconventional deposits and of deposits in deep and very deep waters is necessary to meet future demand. In order to avoid such a supply bottleneck by 2024, an oil price of at least US $ 80 per barrel is required, according to the long-term market equilibrium determined. [German] In dieser Arbeit wurden Angebotskurven fuer 22 bedeutende Oelfoerderlaender ermittelt und anschliessend zu globalen Angebotskurven aggregiert. Gemaess den ermittelten Angebotskurven sind nahezu alle gegenwaertig in der Foerderphase befindlichen Oelprojekte in den Untersuchungslaendern auch beim aktuellen Oelpreis von 35 bis 40 US-$ je Barrel unter Beruecksichtigung der kurzfristigen Grenzkosten rentabel. Sollte der Oelpreis jedoch in den kommenden Jahren auf diesem Niveau verharren, wird es bis zum Jahr 2024 zu einem Angebotsengpass auf dem globalen Oelmarkt kommen, da zur Deckung der zukuenftigen Nachfrage die Erschliessung kostenintensiver, unkonventioneller Lagerstaetten und von Lagerstaetten in tiefen und sehr tiefen Gewaessern notwendig ist. Damit es bis zum Jahr 2024 nicht zu einem solchen Angebotsengpass kommt, ist gemaess des ermittelten langfristigen Marktgleichgewichts ein Oelpreis von mindestens 80 (2014er) US-$ je Barrel notwendig.

  19. Combined heat and power generation. A guide for towns and communities, trade and industry; Kraft-Waerme-Kopplung. Ein Leitfaden fuer Staedte und Gemeinden, Gewerbe und Industrie

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    The brochure describes the cogeneration technology and explains its advantages. Fields of application and potential users are characterized. The technical and economic prospects are outlined, as well as the cost-profit ratios and the chances and problems of this technology. [German] Die vorliegende Broschuere will dem Leser einen Ueberblick ueber die Thematik der KWK geben und einen Beitrag zu ihrer Foerderung leisten. Die Broschuere will: - Ueber KWK informieren, - die Vorteile der KWK erlaeutern, - die Anwendungsfelder und die moeglichen Anwender charakterisieren, - die technisch-wirtschaftlichen Moeglichkeiten fuer die Nutzung der kW aufzeigen, - die Kosten-Nutzen-Relationen und die wirtschaftlichen Chancen und Probleme der KWK verdeutlichen. (orig.)

  20. Possibilities of free cooling in prefabricated residential buildings; Moeglichkeiten der freien Kuehlung fuer Wohngebaeude in Fertigbauweise

    Energy Technology Data Exchange (ETDEWEB)

    Truemper, H.; Hain, K.; Wirth, S. [Dortmund Univ. (Germany). Lehrstuhl Technische Gebaeudeausruestung

    1999-07-01

    Due to their efficient heat insulation, modern low-energy houses can develop disagreeably high room temperatures in the summer. Use of room cooling devices for cooling residential buildings in central Europe is not feasible for ecological as well as economic reasons. This paper presents the buried heat exchanger and the cellar wall exchanger as alternatives to the cooling of incoming air in ventilated low-energy residential buildings. Both are in principle cold storages with coiled pipes taking in air from outside. The buried heat exchanger is charged with cold during the heating period (seasonal storage), whereas the cellar wall exchanger accumulates and gives off cold daily. (orig.) [German] In modernen Niedrigenergiehaeusern koennen sich aufgrund einer verbesserten Waermedaemmung waehrend des Sommers Raumtemperaturen einstellen, die nicht als behaglich empfunden werden. Raumkuehlgeraete scheiden aus oekologischen und oekonomischen Gruenden fuer eine Kuehlung von Wohngebaeuden in Mitteleuropa aus. Als Alternativen zur Kuehlung der Zuluft bei Niedrigenergiehaeusern mit Wohnungslueftung werden der Erdwaermeaustauscher und der Kellerwandaustauscher vorgestellt. Hierbei handelt es sich um Kaeltespeicher, in welchen Rohrschlangen verlegt sind, ueber welche die Aussenluft angesaugt wird. Der Erdwaermeaustauscher wird als Kaeltespeicher waehrend der Heizperiode aufgeladen (saisonaler Speicher), wohingegen der Kellerwandaustauscher taeglich be- und entladen wird. (orig.)

  1. Properties of ZrN films as substrate masks in liquid phase epitaxial lateral overgrowth of compound semiconductors

    International Nuclear Information System (INIS)

    Dobosz, D.; Zytkiewicz, Z.R.; Jakiela, R.; Golaszewska, K.; Kaminska, E.; Piotrowska, A.; Piotrowski, T.T.; Barcz, A.

    2005-01-01

    The usefulness of ZrN films as masks for epitaxial lateral overgrowth of GaAs and GaSb by liquid phase epitaxy is studied. It was observed that during the growth process ZrN masks are mechanically stable, they adhere strongly to the substrate and do not show any signs of degradation even at the growth temperature as high as 750 C. Moreover, perfect selectivity of GaAs and GaSb epitaxy was obtained on ZrN masked substrates ensuring the growth wide and thin layers. To study the influence of growth conditions on electrical resistivity of the mask, ZrN films deposited on GaAs substrates were annealed in various atmospheres. It was found that at temperatures higher than about 580 C the ZrN masks become highly resistive when heat-treated in hydrogen flow employed during growth. Usually, LPE growth temperature for GaAs is higher. Thus, ELO growth of GaAs by LPE becomes more difficult, though still possible, if ZrN masks are to be applied as buried electrical contacts. For GaSb ELO layers however, typical LPE growth temperature is about 480 C. This allows us to grow high quality GaSb ELO layers by LPE still preserving high electrical conductivity of ZrN mask. (copyright 2005 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  2. Non-Debye heat capacity formula refined and applied to GaP, GaAs, GaSb, InP, InAs, and InSb

    Directory of Open Access Journals (Sweden)

    R. Pässler

    2013-08-01

    Full Text Available Characteristic non-Debye behaviors of low-temperature heat capacities of GaP, GaAs, GaSb, InP, InAs, and InSb, which are manifested above all in form of non-monotonic behaviors (local maxima of the respective Cp(T/T3 curves in the cryogenic region, are described by means of a refined version of a recently proposed low-to-high-temperature interpolation formula of non-Debye type. Least-mean-square fittings of representative Cp(T data sets available for these materials from several sources show excellent agreements, from the liquid-helium region up to room temperature. The results of detailed calculations of the respective material-specific Debye temperature curves, ΘD(T, are represented in graphical form. The strong, non-monotonic variations of ΘD(T values confirm that it is impossible to provide reasonable numerical simulations of measured Cp(T dependences in terms of fixed Debye temperatures. We show that it is possible to describe in good approximation the complete Debye temperature curves, from the cryogenic region up to their definitive disappearance (dropping to 0 in the high temperature region, by a couple of unprecedented algebraic formulas. The task of constructing physically adequate prolongations of the low-temperature Cp(T curves up to melting points was strongly impeded by partly rather large differences (up to an order of 10 J/(K·mol between the high-temperature data sets presented in different research papers and/or data reviews. Physically plausible criteria are invoked, which enabled an a priori rejection of a series of obviously unrealistic high-temperature data sets. Residual uncertainties for GaAs and InAs could be overcome by re-evaluations of former enthalpy data on the basis of a novel set of properly specified four-parameter polynomial expressions applying to large regions, from moderately low temperatures up to melting points. Detailed analytical and numerical descriptions are given for the anharmonicity

  3. Development of ceramics for heavy-duty roller bearings in key sectors of future technologies. Ceramic bearings for turbomolecular pumps in semiconductor industry. Final report; Entwicklung von Hochleistungskeramiken fuer Keramikwaelzlager unter extremen Belastungen in Schluesselbereichen von Zukunftstechnologien. Keramikwaelzlager fuer Turbomolekularpumpen in der Halbleiterindustrie. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Stueber, H.G.; Adamietz, R.; Binninger, M. [and others

    1999-09-01

    zweireihigen Schraegkugellagers konnte wegen Fertigungsprobleme nicht weiter verfolgt werden. Der Einsatz eines Stift-Buchse-Fanglagers (Keramikstift und -buchse als Gleitlager) lieferte Ergebnisse, bei denen ein Einsatz als Fanglager denkbar waere. Eine Optimierung ist fuer diese Bauart noch moeglich und sollte fuer die jeweilige Pumpengroesse durchgefuehrt werden. Aufgrund der hohen Prioritaet beim Teilprojekt 'Fanglager' konnten waehrend der Laufzeit des Vorhabens noch keine Ergebnisse mit klassisch gelagerten TMP als Vollkeramiklager vorgelegt werden. (orig.)

  4. Investigation of a concept for electrohydraulic power supply for future passenger car brake systems considering; Untersuchung zur Konzeption einer elektrohydraulischen Energieversorgung fuer zukuenftige Pkw-Bremssysteme

    Energy Technology Data Exchange (ETDEWEB)

    Mutschler, R.

    1999-07-01

    An electrohydraulic power supply for passenger car brake systems is presented. These systems can be classified as brake by wire. The power supply consists of a hydropneumatic accumulator, a high pressure pump and an electric drive. The components are designed considering automotive requests. A new approach to minimize hydraulic pulsations caused by a high pressure piston pump is shown. [German] Eine elektrohydraulische Energieversorgung fuer PKW-Bremssysteme wird vorgestellt. Diese Systeme koennen mit brake by wire klassifiziert werden. Die Energieversorgung besteht aus einem hydropneumatischen Speicher, einer Hochdruckpumpe und einem elektrischen Antrieb. Die Komponenten werden hinsichtlich Automobilanforderungen ausgelegt. Eine neue Methode der Minimierung hydraulischer Pulsationen, die von einer Hochdruck Kolbenpumpe verursacht werden, wird gezeigt.

  5. Sustainable development - theory and practice of environmental consulting. Proceedings of a seminar of Zentrale Informationsstelle Umweltberatung Bayern. Vol. 11; Nachhaltige Entwicklung - Theorie und Praxis fuer die Umweltberatung. Seminarband der Zentralen Informationsstelle Umweltberatung Bayern. Bd. 11

    Energy Technology Data Exchange (ETDEWEB)

    Koller, U.; Behling, G.; Klemmer, A.; Haury, H.J. [comps.

    1998-12-31

    On 25/26 November, 1997, Zentrale Informationsstelle, Umweltberatung Bayern held its 11th seminar under the title ``Sustainable development - theory and practice of environmental consulting. Subjects related to the Agenda 21 were discussed in lectures and workshops. [Deutsch] Am 25. und 26. November 1997 veranstaltete die Zentrale Informationsstelle, Umweltberatung Bayern ihr elftes Seminar mit dem Thema ``Nachhaltige Entwicklung- Theorie und Praxis fuer die Umweltberatung``. In Fachvortraegen und Workshops wurden Themen zur Agenda 21 behandelt. (ABI)

  6. First-principles study of amorphous Ga4Sb6Te3 phase-change alloys

    Science.gov (United States)

    Bouzid, Assil; Gabardi, Silvia; Massobrio, Carlo; Boero, Mauro; Bernasconi, Marco

    2015-05-01

    First-principles molecular dynamics simulations within the density functional theory framework were performed to generate amorphous models of the Ga4Sb6Te3 phase change alloy by quenching from the melt. We find that Ga-Sb and Ga-Te are the most abundant bonds with only a minor amount of Sb-Te bonds participating to the alloy network. Ga and four-coordinated Sb atoms present a tetrahedral-like geometry, whereas three-coordinated Sb atoms are in a pyramidal configuration. The tetrahedral-like geometries are similar to those of the crystalline phase of the two binary compounds GaTe and GaSb. A sizable fraction of Sb-Sb bonds is also present, indicating a partial nanoscale segregation of Sb. Despite the fact that the composition Ga4Sb6Te3 lies on the pseudobinary Ga Sb -Sb2Te3 tie line, the amorphous network can be seen as a mixture of the two binary compounds GaTe and GaSb with intertwined elemental Sb.

  7. Survival and prognostic factors after moderately hypofractionated palliative thoracic radiotherapy for non-small cell lung cancer

    Energy Technology Data Exchange (ETDEWEB)

    Oorschot, B. van; Assenbrunner, B.; Beckmann, G.; Flentje, M. [Universitaetsklinikum Wuerzburg, Interdisziplinaeres Zentrum Palliativmedizin, Klinik und Poliklinik fuer Strahlentherapie, Wuerzburg (Germany); Schuler, M. [Universitaet Wuerzburg, Abteilung fuer Medizinische Psychologie und Psychotherapie, Medizinische Soziologie und Rehabilitationswissenschaften, Wuerzburg (Germany)

    2014-03-15

    Survival and prognostic variables in patients with advanced or metastatic non-small cell lung cancer (NSCLC) requiring thoracic palliative radiotherapy using a moderately hypofractionated regime (13-15 x 3 Gy) were evaluated. From March 2006 to April 2012, 120 patients with a physician estimated prognosis of 6-12 months were treated with this regime using CT-based 3D conformal radiotherapy. We collected data on patient characteristics, comorbidities, toxicity, and treatment parameters. Radiotherapy was completed as prescribed in 114 patients (95.0 %, premature termination 5.0 %). Acute grade 3 toxicity was seen in 6.4 % of patients. The median survival of all patients was 5.8 months. Nonmetastatic patients survived significantly longer than patients with metastatic disease (median 11.7 months vs 4.7 months, p = 0.0001) and 18.6 % of nonmetastatic patients survived longer than 2 years. In 12.7 % radiotherapy started less than 30 days before death and 14.2 % of patients received radiotherapy within 14 days before death. In the multivariate analysis, good general condition, nonmetastatic disease, and a stable or improved general condition at the end of radiotherapy were significant. The treatment parameters, age, and comorbidities were not statistically significant. Our data confirm considerable effectiveness of 13 x 3 Gy with conformal radiotherapy for patients with locally confined NSCLC not fit for radical treatment and raise doubt for this regimen in metastatic patients and ECOG ≥ 2 when burden, acute toxicity, and resources are considered. (orig.) [German] Analyse der Ueberlebenszeiten und prognoserelevanter Variablen von Patienten mit lokal fortgeschrittenem und metastasiertem nicht-kleinzelligen Lungenkrebs nach moderat hypofraktionierter Strahlentherapie (13- bis 15-mal 3 Gy). Zwischen Maerz 2006 und April 2012 wurden 120 Patienten mit aerztlich eingeschaetzter Lebenserwartung von 6-12 Monaten mit diesem Regime mittels CT-basierter 3-D

  8. 47. Essen conference on water and waste management. Is our water management fit for the future?; 47. Essener Tagung fuer Wasser- und Abfallwirtschaft. Ist unsere Wasserwirtschaft zukunftsfaehig

    Energy Technology Data Exchange (ETDEWEB)

    Pinnekamp, J. (ed.)

    2014-07-01

    These congress proceedings cover the following larger topics: Challenges facing the German water economy; value retention and financing of water infrastructure; water quality; Sewage Sludge Ordinance / phosphorus recycling; urban mining; new technologies; wastewater disposal structures of the future; flood management; drinking water (quality issues, clarification methods, maintenance); trace substances; wastewater and energy; and fracking. One lecture has been abstracted individually for this database. [German] Dieser Tagungsband enthaelt folgende Themenschwerpunkte: Herausforderungen an die deutsche Wasserwirtschaft; Werterhalt und Finanzierung der Wasserinfrastruktur; Gewaesserguete; Klaerschlammverordnung / Phosphorrecycling; Urban Mining; Neue Technologien; Abwasserentsorgungsstrukturen der Zukunft; Hochwassermanagement; Trinkwasser (Guetefragen, Aufbereitungsverfahren, Instandhaltung); Spurenstoffe; Abwasser und Energie; Fracking. Ein Vortrag wurde fuer diese Datenbank separat aufgenommen.

  9. The Institute of Automotive Engineering at the Technical University of Dresden; Das Institut fuer Verbrennungsmotoren und Kraftfahrzeuge (IVK) an der TU Dresden

    Energy Technology Data Exchange (ETDEWEB)

    Bergmann, M.

    1995-05-01

    The Institute of Automotive Engineering belongs to the oldest German Institutes of this kind at all. Founded in 1918, the Institute reviews a history of over 75 years. Students training at the Institute takes aim at a future emloyment in fields of research and development and design and computing. Both car manufactures and suppliers appreciate the practice-oriented education given at the Institute. Corresponding to the internal structure the Institute provides a training at following teaching and research fields: Internal Combustion Engines, Automotive Drive Engineering and Automotive Electrics/Electronics. For that the Institute is equipped with modern test bench facilities and CAD/CAE workstations. (orig.) [Deutsch] Das IVK blickt auf eine lange Tradition zurueck und zaehlt noch heute zu den fuehrenden Ausbildungs- und Forschungsstaetten fuer Kraftfahrzeug- und Motoreningenieure. Derzeit bestehen drei Professuren: Verbrennungsmotoren, Kraftfahrzeug- und Antriebstechnik sowie Kraftfahrzeug-Elektronik/-Elektrik. (orig.)

  10. Burnout model of a grate-firing waste incinerator for complete simulation of the combustion space; Abbrandmodell einer Muellrostfeuerung fuer eine vollstaendige Feuerraumsimulation

    Energy Technology Data Exchange (ETDEWEB)

    Kruell, F; Kremer, H; Wirtz, S [Bochum Univ. (Germany). Lehrstuhl Energieanlagentechnik

    1998-09-01

    In the past few decades, grate firing has become an established technology for incineration of residual waste and other materials of the domestic waste type. Process control is difficult because of the heterogeneous nature of the waste which is also subject to seasonal and regional variations. In addition, the waste composition may change significantly as a result of recycling as required by new laws. (orig.) [Deutsch] In den letzten Jahrzehnten hat sich die Rostfeuerung fuer die thermische Entsorgung von Restmuell und hausmuellaehnlichem Gewerbemuell bewaehrt. Die Prozessfuehrung bzw. die Feuerfuehrung solcher Anlagen wird insbesondere durch die starke Heterogenitaet des Muells erschwert, der zusaetzlich jahreszeitlichen und regionalen Schwankungen unterliegt. Zudem kann es in der Zusammensetzung der einzelnen Abfallarten durch die Entnahme von Wertstoffen infolge der Umsetzung von gesetzlichen Vorschriften und Gesetzen - wie Abfallgesetz und Kreislaufwirtschaftsgesetz - zu signifikanten Verschiebungen kommen. (orig.)

  11. Three dimensional atom probe imaging of GaAsSb quantum rings.

    Science.gov (United States)

    Beltrán, A M; Marquis, E A; Taboada, A G; Ripalda, J M; García, J M; Molina, S I

    2011-07-01

    Unambiguous evidence of ring-shaped self-assembled GaSb nanostructures grown by molecular beam epitaxy is presented on the basis of atom-probe tomography reconstructions and dark field transmission electron microscopy imaging. The GaAs capping process causes a strong segregation of Sb out of the center of GaSb quantum dots, leading to the self-assembled GaAs(x)Sb(1-x) quantum rings of 20-30 nm in diameter with x ∼ 0.33. Copyright © 2011 Elsevier B.V. All rights reserved.

  12. The light goes on in the bush. Solar energy for Senegal. Im Busch geht das Licht an. Solarenergie fuer den Senegal

    Energy Technology Data Exchange (ETDEWEB)

    Eckert, H.

    1990-08-01

    The article is about a joint project between Germany and Senegal for the 'testing and propagation of photovoltaic solar power systems', sponsored by Deutsche Gesellschaft fuer Technische Zusammenarbeit (GTZ). The project, scheduled at present for a duration of five years (1987-1991), receives grants of just under DM 21 million and is to demonstrate to the rural population of the Western African state of Senegal how to meet their basic electric power demand for lighting, radio and television, because only a fraction of the more than 13 000 Senegalese villages may expect to be connected to the national power grid during the decades to come. Distances are too long and consumption rates too small to erect a conventional power grid at reasonable cost in this large country covering 200 000 km{sup 2} and populated by just under 10 million inhabitants only. (orig./ORU).

  13. Arbeitsgemeinschaft fuer die Reinhaltung der Elbe - endocrineously active substances in the Elbe, its tributaries and the North Sea; Arbeitsgemeinschaft fuer die Reinhaltung der Elbe - Endokrin wirksame Stoffe in der Elbe, in Nebenfluessen und in der Nordsee

    Energy Technology Data Exchange (ETDEWEB)

    Heemken, O.P. [GALAB, Geesthacht (Germany); Theobald, N. [Bundesamt fuer Seeschiffahrt und Hydrographie, Hamburg (Germany); Hebbel, H. [Universitaet der Bundeswehr Hamburg (Germany); Stachel, B. [Wasserguetestelle Elbe, Hamburg (Germany)

    2000-07-01

    Endocrineously active substances are discharged into surface bodies of water with communal and industrial effluents. Especially estrogenic substances like Bisphenol A, alkyl phenols and alkyl phenol ethoxylates in the Elbe and its tributaries have been neglected so far. In the context of an interdisciplinary project, chemists, biologists and mathematicians investigated the concentrations and fate of these xenoestrogens, relative potential effects of unknown water constituents and quantitative statistical mechanisms based on the available analytical findings. The contribution intends to contribute information on the pollutant situation of selected endocrineously active substances in the Elbe and its tributaries. [German] Ein relevanter Eintragspfad fuer endokrin wirksame Stoffe in die Oberflaechengewaesser sind die Abwaesser kommunaler und industrieller Klaeranlagen. Insbesondere das Vorkommen und der Verbleib von oestrogen wirkenden Stoffen wie Bisphenol A, den Alkylphenolen und Alkylphenolethoxylaten in der Elbe und in Elbenebenfluessen wurde bisher zu wenig Aufmerksamkeit geschenkt. In einem interdisziplinaeren Projekt, an dem sich Chemiker, Biologen und Mathematiker beteiligten, wird versucht, eine erste Antwort zu geben ueber das Vorkommen und den Verbleib dieser Xenooestrogene, ueber relative Wirkpotenzen von unbekannten Wasserinhaltsstoffen durch die Anwendung von In-vitro-Tests und ueber quantitative statistische Zusammenhaenge, die auf vorhandenen Analysenergebnissen basieren. Dieser Bericht soll einen Beitrag leisten zur Immissionssituation von ausgewaehlten endokrin wirksamen Stoffen in der Elbe und in Elbenebenfluessen. (orig.)

  14. Yearbook facility engineering 2009. Facility engineering for electric power grids; Jahrbuch Anlagentechnik 2009. Anlagentechnik fuer elektrische Verteilungsnetze

    Energy Technology Data Exchange (ETDEWEB)

    Cichowski, Rolf Ruediger (ed.)

    2009-07-01

    The strong changes in the energy market - e.g. deregulation, the influence of the Bundesnetzagentur, globalisation of new technologies, constant issueing and adaptation of standards, require more and deeper knowledge than ever before. Issues like energy efficiency and utilisation of renewable energy sources not only govern public discussions but have also created new, variable professions which challenge experts of energy engineering. The yearbook provides an insight into specific issues, e.g. a calendar of events, trade fairs, product recommendations, services, and further hints for practicians. (orig.) [German] Durch die starken Veraenderungen im Energiemarkt, wie die Liberalisierung, die Einflussnahme auf die Gestaltung der Energieversorgung durch die Bundesnetzagentur, die Globalisierung, die neuen Techniken und damit staendige Anpassungen der Normen bzw. Bewaeltigung neuer Normen durch die Fachleute, nimmt die Vielfalt und der Umfang an notwendigen Kenntnissen staendig zu. Themen wie Energieeffizienz und Nutzung regenerativer Energien bestimmen nicht nur die oeffentliche Diskussion, sondern schlagen sich auch in neuen und sich aendernden beruflichen Taetigkeiten nieder. Dadurch sind die Fachleute der Energietechnik ausserordentlich herausgefordert. Zusaetzlich bietet das Jahrbuch spezifische Themen zu den jeweiligen Jahren, wie Kalendarium, Veranstaltungshinweise, Messen, Produktempfehlungen, Dienstleistungen und weitere Tipps fuer Praktiker. (orig.)

  15. Technical and energy economic boundary conditions for a CCS based power generation structure in Europe; Technische und energiewirtschaftliche Rahmenbedingungen fuer eine CCS-basierte Erzeugungsstruktur in Europa

    Energy Technology Data Exchange (ETDEWEB)

    Kober, Tom; Blesl, Markus [Stuttgart Univ. (Germany). Inst. fuer Energiewirtschaft und Rationelle Energieanwendung

    2008-07-01

    The development of the power generation in Europe substantially is characterized by the process of liberalisation and the endeavours to climate protection. The ensuring of future supply security increasingly becomes more important. In order to achieve the climatic protection goal a multiplicity of technical options in the competitively organized market is available. In order to be competitive in such a market, certain requirements have to be expected to future power plants with CCS technology (CCS = carbon Capture and storage). By means of a European energy system model the question is to answered in the contribution under consideration which requirements to the CS technology have to be expected to the CCS technology.

  16. A contribution to the modelling of steam reformers for natural gas fuelled fuel cell heating systems; Ein Beitrag zur Modellierung von Dampfreformern fuer erdgasbetriebene Brennstoffzellenheizgeraete

    Energy Technology Data Exchange (ETDEWEB)

    Nietzsche, Joerg

    2010-10-29

    The author attempted to verify the assumptions and simplifications of common mathematical models of small-scale steam reformers. The emphasis was on the derivation of important model parameters on the basis of easily identifiable catalyst, fluid and reactor characteristics. An easily validated 2D model of a reformer tube is then used for a wide sensitivity analysis and a comparative investigation of various reactor types. [German] Die Motivation dieser Arbeit liegt in der Ueberpruefung der bislang in mathematischen Modellen von kleintechnischen Dampfreformern getroffenen Annahmen und Vereinfachungen, mit speziellem Augenmerk auf die Aufklaerung der Herkunft wichtiger Modellparameter anhand von leicht bestimmbaren Katalysator-, Fluid- und Reaktoreigenschaften. Ein leicht zu validierendes, zweidimensionales Modell eines Reformerrohres soll im Anschluss fuer eine breit angelegte Sensitivitaetsanalyse und eine vergleichende Untersuchung verschiedener Reaktortypen dienen.

  17. Drive design. Mechatronics for production and logistics; Antriebsloesungen. Mechatronik fuer Produktion und Logistik

    Energy Technology Data Exchange (ETDEWEB)

    Kiel, Edwin (ed.) [Lenze AG, Aerzen (Germany)

    2007-07-01

    Highly automated production and logistic systems require mechatronic drives. The book describes how industrial production and logistics work, and how the appropriate drive systems should be designed. The function of the mechanical and electronic elements of a drive system is described, including the required software, and the fundamentals of dimensioning are gone into. The authors also discuss engineering, reliability and important life cycle aspects. Applications in material flow and handling technology, in continuous and clocked production lines and finishing processes are presented in twelve sections offering different drive solutions for the motor, current inverter and software, transmission system and mechanical elements. The specific requirements and functionalities of these twelve solutions are presented. The focus is on energy conversion with controlled electric drive systems. (orig.) [German] Hochautomatisierte Produktions- und Logistikanlagen benoetigen mechatronische Antriebsloesungen. Dieses Buch beschreibt, wie die industrielle Fertigung und Logistik arbeitet und wie die hierzu erforderlichen Antriebsloesungen aufgebaut sind. Es wird die Funktionsweise der mechanischen und der elektronischen Elemente eines Antriebssystems einschliesslich der Software beschrieben und ihre Dimensionierungsgrundlagen behandelt. Die Autoren gehen darueber hinaus auf das Engineering, die Zuverlaessigkeit und auf wichtige Aspekte des Lebenszyklus ein. Die Vielzahl der Anwendungen in der Materialfluss- und der Handhabungstechnik, in kontinuierlichen und getakteten Produktionslinien sowie fuer Bearbeitungsprozesse wird in insgesamt zwoelf Antriebsloesungen eingeteilt. Diese umfassen den Motor, den Umrichter mit seiner Software, das Getriebe sowie mechanische Antriebselemente. Es werden die spezifischen Anforderungen und die Funktionalitaet dieser zwoelf Loesungen dargestellt. Dabei konzentrieren sich die Autoren auf die Energieumsetzung mit geregelten elektrischen

  18. Assessment of conformity and suitability for use of the energy subsystem of interoperable high-speed lines; Konformitaetsbewertung und EG-Pruefverfahren fuer das Teilsystem Energie

    Energy Technology Data Exchange (ETDEWEB)

    Behrends, D. [Steglitzer Damm, Deutschen Bahn, Berlin (Germany); Brodkorb, A.; Matthes, R. [Siemens AG, Erlangen (Germany)

    2003-05-01

    The directive 96/48/EG governs the conformity assessment of conformity of interoperability constituents and of suitability for use of subsystems of the trans-European high-speed rail system. The assessment of the overhead contact line type SICAT H 1.0 and the energy subsystem of the new high-speed line Belgian boundary-Rotterdam-Hoofddop (HSL Zuid) in the Netherlands establish examples for the application of the technical specification for the energy subsystem. (orig.) [German] Die Richtlinie 96/48/EG regelt die Bewertung der Konformitaet von Komponenten und das EG-Pruefverfahren von Teilsystemen des interoperablen transeuropaeischen Hochgeschwindigkeitsbahnsystems. Beispiele fuer diese beiden Vorgaenge sind die Bewertung der Oberleitungsbauart SICAT H 1.0 und die Pruefung der Energieversorgung der Hochgeschwindigkeitsstrecke belgische Grenze-Rotterdam-Hoofddop (HSL Zuid) in den Niederlanden. (orig.)

  19. Mobilisation and realisation concepts for increased local activities in the fields of energy conservation and climate protection. Final report about the second subsidy period; Mobilisierungs- und Umsetzungskonzepte fuer verstaerkte kommunale Energiespar- und Klimaschutzaktivitaeten. Endbericht zur zweiten Foerderperiode

    Energy Technology Data Exchange (ETDEWEB)

    Boede, U.; Frahm, T.; Gruber, E. [and others

    1999-02-02

    Forschungsansatz war akteurs- sowie prozessorientiert und interdisziplinaer. Zentrales Ziel war die Entwicklung wissenschaftlich fundierter, praxisrelevanter Strategien fuer Akteure auf kommunaler Ebene. Energiespar- und Klimaschutzaktivitaeten auf kommunaler Ebene wurden als Untersuchungsgegenstand ausgewaehlt, da dort erhebliche bisher nur unzureichend ausgeschoepfte Potentiale zur Minderung von CO{sub 2}- und anderen Treibhausgasemissionen bestehen und gute Umsetzungsbedingungen vorliegen. Das Grundverstaendnis: Der Untersuchungsgegenstand 'Klimaschutz' wird als sozialer Lernprozess verstanden. Ausgangspunkt fuer Klimaschutzmassnahmen ist die Motivationsphase (Handlungsbereitschaft). Darauf folgt die Planung und nach der Entscheidung fuer eine der Optionen die Umsetzung. Endpunkt ist die Auswertung der Ergebnisse, die gleichzeitig auch einen Einstieg in eine neuen Umsetzungszyklus sein kann. Die Methoden: Im Projekt wird der Aktions- und Handlungsforschungsansatz auf das Problemfeld 'Veraenderungsmoeglichkeiten im Klimaschutz' aufgewandt. Das bedeutet erstens, dass nicht nur mit unterschiedlichsten Methoden die Bedingungen und Wirkungen verschiedener Formen sozialen Handelns untersucht werden, sondern die Forschenden als Interaktionspartner/innen auch in konkrete soziale Handlungsprozesse eingebunden sind. Zweitens wird eng mit den Akteuren vor Ort zusammengearbeitet (z.T. auch in Partizipationsprozessen). Fuer die empirischen Untersuchungen wurden verschiedene Methoden zur Erhebung, Prozessbeobachtung, Aktivierung bzw. Intervention und Evaluation herangezogen. (orig.)

  20. Humidifier for an adiabatic cooling of air for condenser systems and heat exchanger systems; Befeuchtungssystem zur adiabaten Luftabkuehlung fuer Verfluessiger- und Rueckkuehlersysteme

    Energy Technology Data Exchange (ETDEWEB)

    Ziegltrum, Ulrich [Guentner AG und Co.KG, Fuerstenfeldbruck (Germany); Cibis, Dominik [Europaeische Studienakademie Kaelte-Klima-Lueftung, Maintal (Germany)

    2011-07-01

    Heat transfer units must be dimensioned so that reliable operation of the plant will be ensured even in extreme climates. From an energetic view, the heat exchanger surface should be as large as possible, thus enabling operation with only a small temperature difference between ambient temperature and working fluid temperature. To keep investments low, however, heat transfer units are often designed for greater temperature differences. It must be kept in mind that the temperature of the working fluid will follow the rising ambient temperature, with some delay. For this reason, plants must be dimensioned so that the temperature and/or pressure of the working fluid will be in the permissible temperature range at the expected ambient temperatures. A system was developed that ensures reliable operation even at high ambient temperatures and also efficient operation through the whole service life of the plant. In order to reduce the air inlet temperature at the heat exchanger unit, the air is cooled by adiabatic evaporation. The system is controlled by continuous adaptation of the cooling water volume depending on the operating conditions and on cost aspects. Water circulation is unnecessary. [German] Um den sicheren Anlagenbetrieb auch bei klimatisch extremen Bedingungen zu gewaehrleisten, muessen Waermeuebertrager in ausreichender Groesse dimensioniert werden. Aus energetischen Gesichtspunkten sollte die Flaeche des Waermeuebertragers moeglichst gross sein, wodurch die Anlage mit einer geringen Temperaturdifferenz zwischen Umgebungs- und Arbeitsmediumstemperatur betrieben werden kann. Um die Investitionskosten gering zu halten, werden jedoch oftmals Waermeuebertrager fuer hoehere Temperaturdifferenzen ausgelegt. Es ist allerdings zu beruecksichtigen, dass die Temperatur des Arbeitsmediums einer steigenden Umgebungstemperatur mit entsprechendem Abstand folgt. Daher muss schon bei der Anlagendimensionierung darauf geachtet werden, dass sich die Temperatur bzw. der Druck

  1. Development of plans for retrofitting Russian housing, taking into account European competences for increasing its energy efficiency; Entwicklung von Planungs- und Sanierungskonzepten fuer den russischen Wohnungsbau

    Energy Technology Data Exchange (ETDEWEB)

    Ezhov, Andrey; Himburg, Stefan [Hochschule fuer Technik Berlin (Germany)

    2010-02-15

    There are various options for retrofitting Russian prefabricated concrete-slab buildings of the first period of industrial construction, so-called khrushchevki, with the object of bringing them up to European standards of thermal insulation technology. In the given case the basis of calculations was the German EnEV 2007 (Building Energy Conservation Ordinance). The analysis of sample building data opened up a large range of possibilities for increasing its energy efficiency. For instance, calculations ascertained that relatively inexpensive methods of enhancing a buildings thermal insulation can achieve a significant decrease in energy consumption for heating. In addition, this thesis analyzes possible variations of retrofitting and reconstruction using different types of materials and heating systems. The results clearly illustrate that residential houses e.g. type series 1-507 have a future as comfortable and functional housing space. In fact, and in contrast to common prejudices, their fate is far from hopeless. Even the climatic circumstances of a northern city such as St. Petersburg do not preclude the use of alternative energy sources such as solar energy. On the contrary, it is a conceivable method of support for heating systems. In summary, the investigations show that the retrofitting of prefabricated concrete-slab buildings of the first construction period is a sensible project, especially when taking into account the further development of fossil energy prices. In its most sophisticated form (the passive house), retrofitting will result in energy savings of up to 90 %. [German] Fuer russische Wohnhaeuser der ersten Periode des industriellen Bauens, so genannte ''Chruschtschowki'', besteht ein hoher Sanierungsbedarf. Im Rahmen der nachfolgenden Betrachtungen werden moegliche energetische Sanierungsmassnahmen fuer diese typischen russischen Wohngebaeude vorgestellt. Das Ziel ist eine Angleichung an das europaeische Waermeschutzniveau

  2. Assessment of the permeation characteristics of fibre-reinforced materials and elastomers for applications in cryotechnics and refrigeration engineering; Bestimmung der Permeationseigenschaften von Faserverbundwerkstoffen und Elastomeren fuer den Einsatz in der Kryo- und Kaeltetechnik

    Energy Technology Data Exchange (ETDEWEB)

    Waschull, Joerg; Knabe, Monika; Grimm, Ulrich; Roemer, Siegfried [Institut fuer Luft- und Kaeltetechnik GmbH, Dresden (Germany)

    2009-07-01

    For safe and environmentally acceptable operation of cryotechnical and refrigerating sytems, the permeation characteristics of the elastomers and fibre-reinforced materials must be known. While elastomers are used primarily as sealing materials of refrigeration systems, fibre-reinforced materials are used increasingly in containers for supercooled liquids like LN2, LH2, and LH3. Measuring systems and methods were developed at the Institut of Ventilation and Refrigeration Engineering at Dresden (Institut fuer Luft- und Kaeltetechnik, Dresden) that enable quantitative statements on the permeation characteristics as a function of temperature. (orig.)

  3. Experimental investigation and optimisation of burner systems for glass melting ends with regenerative air preheating. Final report; Experimentelle Untersuchung und Optimierung von Brennersystemen fuer Glasschmelzwannen mit regenerativer Luftvorwaermung. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Scherello, A.; Flamme, M.; Kremer, H.

    2000-02-15

    The project comprised experiments on burner systems for glass melting ends with regenerative air preheating for the purpose of optimisation. The experimental set-up was to reflect realistic conditions. In the first stage of the investigations, modern burner systems were installed in a GWI test facility and investigated. [German] Ziel des oben genannten Forschungsvorhabens war die Durchfuehrung experimenteller Untersuchungen von Brennersystemen fuer Glasschmelzwannen mit regenerativer Luftvorwaermung sowie deren Optimierung. Dazu war es notwendig, einen experimentellen Aufbau zu realisieren, mit dessen Hilfe die Stroemungs-, Mischungs- und Umsetzungsphaenomene von Glasschmelzoefen realistisch nachgestellt und aussagekraeftige Untersuchungen durchgefuehrt werden koennen. In einem ersten Untersuchungsschritt wurden moderne Brennerlanzen an der GWI-Versuchsanlage installiert und untersucht. (orig.)

  4. Modern technology for psychological well-being. Facility management systems at the psychiatric therapy center `Hard` at Embrach; Moderne Technik fuer gute Psyche. Einsatz von Gebaeudeautomation im Psychiatrie-Zentrum Hard in Embrach

    Energy Technology Data Exchange (ETDEWEB)

    Boxler, C. [Boxler MSRL-Engineering fuer Gebaeudeautomation AG, Jona (Switzerland)

    1998-04-01

    The central heating system of Hard hospital center was due for modernisation. The new control systems were to be integrated in the existing facility management system. The contribution describes the modernisation and reconstruction project, from the preliminary projecting stages to the start-up of the new system. (orig.) [Deutsch] Bei der Klinik Hard musste die Heizzentrale saniert und die Waermeerzeugung modernisiert werden. Dabei sollte die Regel- und Steuerungstechnik in das bestehende Gebaeudeautomationssystem integriert werden. Der folgende Beitrag erlaeutert das entsprechende Projekt fuer die Sanierung und den Umbau der Heizzentrale, von der MSRL-Planung bis hin zur Gewerkeuebergabe. (orig.)

  5. Exercise ''contact point for persons from the neighborhood of a nuclear power station after a severe accident''; Uebung ''Kontaktstelle fuer Personen aus der Umgebung eines Kernkraftwerkes nach einem schweren Unfall''

    Energy Technology Data Exchange (ETDEWEB)

    Stuerm, R.P. [SafPro AG, Ausbildung und Beratung in Strahlenschutz, Basel (Switzerland); Schubiger, V.; Voegtli, M. [Abt. Militaer und Bevoelkerungsschutz des Kantons Aargau (Switzerland)

    2001-07-01

    an und sind auch keine Auskunftszentren fuer die Medien. Rund 1'000 Personen sollen pro 24 Stunden auf einer Kontaktstelle betreut werden, wobei rund 500 Personen mit Dosen von weniger als 50 mSv (Gruppe D), rund 300 Personen mit Dosen zwischen 50 und 500 mSv (Gruppen C und B) und knapp 200 Personen mit Dosen ueber 500 mSv (Gruppe A) erwartet werden. Unter diesen 1'000 Personen duerfte es 30 schwangere Frauen (Gruppe E) haben. Mittels eines einfachen Leitsystems sollen die Ratsuchenden in die Gruppen A bis E eingeteilt werden. Diese Einteilung erfolgt durch Selbstdeklaration (Aufenthaltsort waehrend der Wolkenphase), die bei der Gruppe A durch geschultes Personal mittels Integrationsberechnungen der Ortsdosisleistung individuell verifiziert wird. Die uebrigen Besucher der Kontaktstellen werden in Gruppen durch Aerzte und Strahlenphysiker informiert und psychologisch betreut. Mitglieder der Eidgenoessischen Kommission fuer AC-Schutz, der Abteilung Militaer und Bevoelkerungsschutz, der Nationalen Alarmzentrale, der Hauptabteilung fuer die Sicherheit von Kernanlagen sowie Kantonsaerzte (Leiter des Aerztlichen Dienstes der Landesgesundheitsbehoerde) hatten ein Konzept fuer solche Kontaktstellen ausgearbeitet. Am 26.10.00 fand eine Uebung im Massstab 1:10 mit 85 Figuranten und knapp 100 Beuebten statt, um dieses Konzept auf seine Machbarkeit zu pruefen. (orig.)

  6. Social acceptance for the forthcoming phases of the energy transition; Gesellschaftliche Akzeptanz fuer die bevorstehenden Phasen der Energiewende

    Energy Technology Data Exchange (ETDEWEB)

    Renn, Ortwin [Univ. Stuttgart (Germany). Inst. fuer Sozialwissenschaften; Sager, Christina [Fraunhofer-Institut fuer Bauphysik, Stuttgart (Germany); Schweizer-Ries, Petra [Institut fuer ZukunftsEnergieSysteme (IZES), Saarbruecken (Germany)

    2015-04-15

    The effectiveness of communication for influencing the acceptance is limited. Especially when it comes to projects, bringing the burden on local residents and where the common good is socially controversial, it is almost impossible solely by information and communication, even if they are offered in the form of a dialogue, to reach a change in the acceptance. In addition, large-scale changes are viewed more as a foreign body and less than enrichment of the local environment. In this respect, it is appropriate simply because of the lack of effectiveness of communication, the affected people give greater opportunities for participation. [German] Die Wirksamkeit von Kommunikation zur Beeinflussung der Akzeptanz ist aber begrenzt. Vor allem wenn es um Vorhaben geht, die Belastungen fuer die Anwohner mit sich bringen und bei denen der Allgemeinnutzen gesellschaftlich umstritten ist, ist es nahezu unmoeglich, allein durch Information und Kommunikation, auch wenn sie in Form eines Dialogs Angeboten werden, eine Veraenderung der Akzeptanz zu erreichen. Hinzu kommt, dass grossflaechige Veraenderungen eher als Fremdkoerper und weniger als Bereicherung des oertlichen Umfeldes angesehen werden. Insofern ist es schon aufgrund der mangelnden Effektivitaet von Kommunikation angebracht, den betroffenen Menschen groessere Beteiligungschancen einzuraeumen.

  7. Dependence on the growth direction of the strain in AlGaSb alloys

    Energy Technology Data Exchange (ETDEWEB)

    Rojas-Lopez, M; Delgado-Macuil, R; Gayou, V L; Orduna-Diaz, A [CIBA-Tlaxcala, IPN, Tlaxcala, Tlax. (Mexico); Momox-Beristain, E [FC-BUAP, Puebla, Pue. (Mexico); Salazar-Hernandez, B [CIICAp-UAEM, Cuernavaca, Mor. (Mexico); Rodriguez, A G, E-mail: marlonrl@yahoo.com.m [IICO-UASLP, San Luis Potosi, S.L.P. (Mexico)

    2009-05-01

    High resolution x-ray diffraction profiles were obtained from Al{sub x}Ga{sub 1-x}Sb layers grown on (001) and (111) GaSb substrates. The out of plane lattice parameter, was estimated directly from the symmetrical diffractions for (001) and (111) alloys. These results show that all the layers are strained, and those grown on (001) GaSb are slightly more strained than the corresponding layers grown on (111) GaSb. This difference is explained by the dependence of the strain ratio on growth direction. The out of plane lattice parameter as a function of Al content is higher than the corresponding bulk lattice parameter of Al{sub x}Ga{sub 1-x}Sb layers obtained with Vegard's law. Also, the perpendicular and the in-plane lattice parameter expected for pseudomorphic alloys, was estimated from the strain ratios, assuming an elastic deformation and using the EDX alloy composition to interpolate the elastic constants C{sub ij}. This estimation also shows that almost all the layers are fully strained.

  8. Fachsprachlichkeit und Verständlichkeit in deutschen Verträgen

    DEFF Research Database (Denmark)

    Larsen, Aase Voldgaard

    2010-01-01

    In diesem Beitrag wird die Fachsprachlichkeit und Verständlichkeit in deutschen Verträgen thematisiert. Der Beitrag basiert auf einer Untersuchung, die im Rahmen meiner Dissertation durchgeführt wurde. Sie trägt den Titel „Faglighed og forståelighed i kontrakter. En undersøgelse af sproglige fors...

  9. Propagation and collision of soliton rings in quantum semiconductor plasmas

    International Nuclear Information System (INIS)

    El-Shamy, E.F.; Gohman, F.S.

    2014-01-01

    The intrinsic localization of electrostatic wave energies in quantum semiconductor plasmas can be described by solitary pulses. The collision properties of these pulses are investigated. In the present study, the fundamental model includes the quantum term, degenerate pressure of the plasma species, and the electron/hole exchange–correlation effects. In cylindrical geometry, using the extended Poincaré–Lighthill–Kuo (PLK) method, the Korteweg–de Vries (KdV) equations and the analytical phase shifts after the collision of two soliton rings are derived. Typical values for GaSb and GaN semiconductors are used to estimate the basic features of soliton rings. It is found that the pulses of GaSb semiconductor carry more energies than the pulses of GaN semiconductor. In addition, the degenerate pressure terms of electrons and holes have strong impact on the phase shift. The present theory may be useful to analyze the collision of localized coherent electrostatic waves in quantum semiconductor plasmas. - Highlights: • The propagation and the collision of pulses in quantum semiconductor plasmas are studied. • Numerical calculations reveal that pulses may exist only in dark soliton rings for electron–hole quantum plasmas. • Typical values for GaSb and GaN semiconductors are used to estimate the basic features of soliton rings. • It is found that the pulses of GaSb semiconductor carry more energies than the pulses of GaN semiconductor. • The degenerate pressure terms of electrons and holes have strong impact on the phase shift

  10. Photovoltaic systems. A guide for electricians, roofers, projecting engineers and architects; Photovoltaische Anlagen. Leitfaden fuer Elektriker, Dachdecker, Fachplaner, Architekten und Bauherren

    Energy Technology Data Exchange (ETDEWEB)

    Haselhuhn, R.; Berger, F.; Hasenoehrl, G.; Morsch, R.; Quaschning, V.; Rauscher, S.; Seltmann, T.; Hartmann, U.

    2001-07-01

    can-polluting and sustainable power supply will rely heavily on photovoltaic systems. Experience has shown that the development of PV systems cannot be assured without careful, high-quality planning dimensioning, installation, commissioning and maintenance. This guide contains comprehensive information on all aspects of PV systems. It addresses architects, projecting engineers, builder-owners, electricians and roofers, as well as decision-makers on state and community level with the intention of informing them on the latest state of the art. Contents: 1. Functional principles, design, characteristics and properties of components, modules and current inverters; 2. in situ analysis and site analysis; 3. shading analysis; 4. Optimal planning, dimensioning and design; 5. simulation programmes; 6. installation, commissioning, failure detection and maintenance; 7. assembly systems and integration options; 8. funding programmes. To facilitate updating, the book is in the form of a loose-leaf collection. [German] Fuer eine klimavertraegliche und nachhaltige zukuenftige Energieversorgung Deutschlands ist der massive Ausbau der Photovoltaik unabdingbar. Die Rahmenbedingungen fuer einen solchen Ausbau sind geschaffen, der Markt befindet sich zur Zeit im Umbruch. In Deutschland werden von einem solchen Ausbau in erster Linie netzgekoppelte PV-Anlagen betroffen sein. Die Erfahrungen mit der Performance solcher Anlagen (1.000-Daecher-Programm, Programm Sonne in der Schule, Schweizer Foerderprogramm etc.) haben allerdings gezeigt, dass ohne eine sorgfaeltige und auf hohem Niveau stehende Planung, Dimensionierung, Installation, Inbetriebnahme und Wartung der optimale Ertrag und damit der Beitrag zum Klimaschutz nicht gewaehrleistet werden kann. Aus diesen Gruenden ist es notwendig und sinnvill, Architekten, Planern, Bauherren, Installationsbetrieben (sowohl Elektrikern als auch Dachdeckern) und last but not least den Entscheidungstraegern in Laendern und Kommunen ein

  11. The market for absorption refrigeration in Spain; Der Markt fuer Absorptionskaeltetechnik in Spanien

    Energy Technology Data Exchange (ETDEWEB)

    Paramo, M. [Enagas, Madrid (Spain)

    1996-12-31

    Due to the Spanish climate (hot summers throughout large parts of the country) the household and small consumers sector in this country has a substantial requirement for cold production. Today most industrial and commercial buildings here such as office blocks, shopping centres, hospitals, hotel etc. are equipped with air conditioning plants. Usually these are based on compression refrigeration plants. Beyond this air conditioning plants are now also beginning to become popular in one-family houses and flats, especially in southern and western Spain and along the Mediterranean coast. In most cases these plants, too, work with compression refrigeration, though it is not uncommon to find steam-based refrigeration systems. Both these types of system are driven by electricity. In the industrial sector, too, the market for refrigeration shows a very wide spectrum across a large variety of branches. (orig./HW) [Deutsch] In Spaniens HuK-Sektor (Haushalte und Kleinverbraucher) besteht aufgrund der herrschenden klimatischen Bedingungen (sehr warme Sommer in weiten Teilen des Landes) ein erheblicher Bedarf an der Erzeugung von Kaelte. Die meisten Industrie- und gewerblichen Gebaeude, wie Buerokomplexe, Einkaufszentren, Krankenhaeuser, Hotels, usw. sind mittlerweile mit Klimaanlagen ausgeruestet. Im allgemeinen handelt es sich hierbei um Kompressionskaelteanlagen. Vornehmlich in Sued- und Zentralspanien sowie an der Mittelmeerkueste haben Klimaanlagen inzwischen aber auch verstaerkt in Einfamilienhaeusern und Wohnungen Einzug gehalten. Vorwiegend sind Kompressionskaelteanlagen im Einsatz; haeufig sind aber auch Systeme anzutreffen, die auf Wasserdampfbasis arbeiten. Energietraeger ist bei beiden Systemen Strom. Der Markt fuer Kaelteerzeugung ist auch im industriellen Bereich sehr breitgefaechert und umfasst eine Vielzahl von Branchen. Der Loewenanteil entfaellt jedoch auf die Nahrungsmittelindustrie. (orig./HW)

  12. Forest report 2014 for Baden-Wuerttemberg; Waldzustandsbericht 2014 fuer Baden-Wuerttemberg

    Energy Technology Data Exchange (ETDEWEB)

    Meining, Stefan [Buero fuer Umweltueberwachung, Freiburg (Germany); Wilpert, Klaus v.; Schumacher, Joerg; Delb, Horst; Hartmann, Peter; Rubin, Lisa; John, Reinhold; Metzler, Berthold; Bublitz, Thomas [Forstliche Versuchs- und Forschungsanstalt Baden-Wuerttemberg, Freiburg im Breisgau (Germany); Augustin, Nicole [Bath Univ. (United Kingdom)

    2014-07-01

    The annual forest status report 2014 shows that the persistently high burdens have not fundamentally improved the health of the forests. In addition to significant improvements in soil conditions, which can be traced back to successful forest calcifications, climate change with its various impacts is a lasting burden on the forests. Unfortunately, the forest situation has deteriorated considerably compared to the previous year. With 42 per cent damaged trees, the third highest value has been reached since the start of the recordings about 3 years ago. This means that the medium-term trend towards the improvement of the forest state unfortunately does not continue. This is clearly evident in the crown condition as an important indicator of the health of the trees. The average needle / leaf loss of the trees has increased by 3.7 percentage points to 25.8 percent. The share of undamaged forest areas has fallen by nine percentage points to just 24 percent. These changes can be attributed to the very dry spring weather, the presence of harmful insects and a strong fruit formation. [German] Der jaehrliche Waldzustandsbericht 2014 zeigt, dass durch die unveraendert hohen Belastungen der Gesundheitszustand der Waelder sich nicht grundsaetzlich gebessert hat. Neben deutlichen Verbesserungen im Bodenzustand, die auf erfolgreiche Waldkalkungen zurueck zu fuehren sind, stellt insbesondere der Klimawandel mit seinen verschiedenen Auswirkungen eine dauerhafte Belastung der Waelder dar. Leider hat sich der Waldzustand gegenueber dem Vorjahr deutlich verschlechtert. Mit 42 Prozent geschaedigter Baeume wird der dritthoechste Wert seit Beginn der Aufnahmen vor rund 3 Jahren erreicht. Damit setzt sich der mittelfristige Trend zur Verbesserung des Waldzustandes leider nicht weiter fort. Beim Kronenzustand als wichtigem Indikator fuer den Gesundheitszustand der Baeume zeigt sich dies deutlich. Der mittlere Nadel-/Blattverlust der Baeume hat sich um 3,7 Prozentpunkte auf 25,8 Prozent

  13. Agreements on climatic protection - the verification problem. IKARUS. Instrumente fuer Klimagas-Reduktionsstrategien. Final report. Subproject 9: International Greenhouse Gas Verification

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, W.; Hoffmann, H.J.; Katscher, W.; Kotte, U.; Lauppe, W.D.; Stein, G.

    1995-12-31

    The sustained reduction of climate gas emissions associated with the generation, conversion and utilization of energy is clearly becoming an ever more important task in energy and environmental policy. Different strategies are conceivable in order to fulfil this mission. The aim of the IKARUS Project (Instrumente fuer Klimagas-Reduktionsstrategien - Instruments for Greenhouse Gas Reduction Strategies) was to provide a set of tools with which strategies can be developed and reconstructed (making conceptual use of the various technologies) and also tested with respect to their internal consistency and examined with regard to their economic impacts. Corresponding to the great complexity of the task in hand and the technological range of energy applications, the set of instruments is very extensive. It consists of two parts: a data base with a comprehensive data collection and several computer models of various types.The ``Verification`` project was integrated into IKARUS as a link between the national project and the international environment, enabling the examination of technologies and methods for verifying the compliance of statesparty to the Framwork Convention on Climate Change (FCCC).(orig/KW)

  14. AGF activieties in the field of systems analysis and technology assessment

    International Nuclear Information System (INIS)

    1983-01-01

    Activities of the following West German organisation in the field of systems analysis are reviewed: Kernforschungsanlage Juelich (KFA), Kernforschungszentrum Karlsruhe (KfK), Deutsche Forschungs- und Versuchsanstalt fuer Luft- und Raumfahrt (DFVLR), Gesellschaft fuer Strahlen- und Umweltforschung (GSF), Gesellschaft fuer Mathematik und Datenverarbeitung (GMD), Max-Planck-Institut fuer Plasmaphysik (IPP). (UA) [de

  15. Melatonin - a key to the evaluation of the effects of electric; Melatonin - Schluessel fuer die Bewertung der Wirkung elektrischer und magnetischer Felder?

    Energy Technology Data Exchange (ETDEWEB)

    Wunstorf, B.; Lichtenberg, W. [Fachhochschule Hamburg (Germany). Fachbereich Oekotrophologie; Boikat, U. [BAGS, Amt fuer Gesundheit, Hamburg (Germany)

    2000-09-01

    The human pineal gland produces melatonin in a circadian rhythm. The substance has different functions - as a hormone, as an antioxidant and as a neurotransmitter. The secretion of melatonin and its tumor inhibition function can be influenced by electric and magnetic fields. Investigations have been carried out with rodents which have a melatonin rhythm similar to humans; nevertheless, they show a high variability between the species. The present state of knowledge only allows limited use of melatonin as an indicator for the impact of electric and magnetic fields. (orig.) [German] In der Epiphyse des Menschen wird in circadianem Rhythmus Melatonin produziert und ausgeschuettet. Die Substanz hat unterschiedliche Funktionen - als Hormon, Antioxidans und Neurotransmitter. Seine Ausschuettung und seine tumorhemmende Funktion koennen durch elektrische und magnetische Felder beeinflusst werden. Anhand von Nagern, die einen dem Menschen aehnlichen Melatoninrhythmus haben, allerdings eine hohe Speziesvarianz aufweisen, wurden diese Funktionen untersucht. Nach dem jetzigen Kenntnisstand eignet sich Melatonin nur bedingt als Indikator fuer die Wirkungen elektrischer und magnetischer Felder. (orig.)

  16. Harmonisation of fire testing of conveyor belts for underground applications within the EC; Harmonisierung der brandtechnischen Pruefverfahren von Foerdergurten fuer den Einsatz unter Tage innerhalb der EG

    Energy Technology Data Exchange (ETDEWEB)

    Foit, W. [DMT-Gesellschaft fuer Forschung und Pruefung mbH, Dortmund (Germany). Fachstelle fuer Brand- und Explosionsschutz unter Tage - Versuchsgrube Tremonia

    1998-12-01

    The mining countries of the EC still have different regulations for fire testing of conveyor belts. The test methods will be harmonized for the Common Market, and requirements on conveyor belts will be standardized within the EC. A new EC standard will be drawn up. [Deutsch] Zur Zeit sind in den bergbaubetreibenden Laendern der EG noch unterschiedliche Verfahren zur brandtechnischen Pruefung von Foerdergurten vorgeschrieben. Mit dem Inkrafttreten des Gemeinsamen Marktes und der damit zusammenhaengenden Forderung nach Abbau von Handelshemmnissen sollen diese Pruefverfahren harmonisiert werden. Ziel ist es, die an die Foerdergurte zu stellenden brandtechnischen Anforderungen innerhalb der EG zu vereinheitlichen. Es soll deshalb eine europaeische Norm zur Beurteilung des Brandverhaltens und der Brandausbreitung an Foerdergurten fuer den Kohlenbergbau unter Tage erstellt werden. (orig./MSK)

  17. Point of view. Maize for biogas production in Thuringia; Standpunkt. Maisanbau fuer die Biogaserzeugung in Thueringen

    Energy Technology Data Exchange (ETDEWEB)

    Reinhold, Gerd; Peyker, Walter; Zorn, Wilfried; Strauss, Christoph; Struempfel, Juergen; Vetter, Armin; Degner, Joachim

    2011-04-15

    In Thuringia the maize represents with a current size of the cultivation of less than 10% and a cultivation concentration of less than 20% in every county an enrichment of crop rotation. The recycling of the digestate in the farm results due to higher C-reduction stability of the fermentation products to any deterioration of the C balance and soil fertility. Especially in Thuringia farming regions with very low livestock the introduction of biogas plants introduces to a higher diversity of agricultural production and dispersal of crop rotation. Practiced by the combination of locally adapted biogas plants with animal husbandry (milk production = use manure, pig = heat utilization) positive economic and environmental effects can be achieved for the Thuringian farmers. [German] In Thueringen stellt der Mais bei einem gegenwaertigen Anbauumfang von unter 10 % und einer Anbaukonzentration von unter 20 % in jedem Landkreis eine Bereicherung der Fruchtfolge dar. Die Verwertung der Gaerreste im Betrieb fuehrt infolge hoeherer C-Abbaustabilitaet der Gaerprodukte zu keiner Verschlechterung der C-Bilanz und der Bodenfruchtbarkeit. Besonders in Thueringer Ackerbauregionen mit sehr geringem Tierbesatz traegt die Einfuehrung von Biogasanlagen zu einer hoeheren Vielfalt der landwirtschaftlichen Produktion und Auflockerung der Fruchtfolgen bei. Durch die praktizierte Kombination von standortangepassten Biogasanlagen mit der Tierhaltung (Milcherzeugung = Guellenutzung, Schweinehaltung = Waermenutzung) werden fuer die Thueringer Landwirte positive oekonomische und oekologische Effekte erzielt.

  18. Theoretical and experimental investigations of an added firing system in cogeneration processes with gas turbines optimizing flame stability and burnout behaviour; Theoretische und experimentelle Untersuchungen einer Zusatzfeuerung in gasturbinengestuetzten KWK-Prozessen fuer eine Optimierung hinsichtlich Flammenstabilitaet und Ausbrandverhalten

    Energy Technology Data Exchange (ETDEWEB)

    Koesters, M.; Kliemt, C.

    2004-07-01

    The effects of the key flow, mixing and ignition parameters on the ignition process was investigated in near-practical conditions. It was found that the ignition energy can be minimized by careful selection of the electrode configuration and positioning near the burner. Further, a criterion was developed for developing characteristic fields and design specifications for gas burners. The FLUENT code can calculate the mixing, flow and turbulence situation of a burner. This, and plus the newly established ignition criterion, can support the development of characteristic fields and help to minimize the experimental expenditure. [German] Der Einfluss der wichtigsten Stroemungs-, Mischungs- und Zuendparameter auf die Zuendung wurde mit Hilfe gezielter experimenteller und theoretischer Untersuchungen unter industrienahen Bedingungen getestet. Hierbei konnte eine gute Uebereinstimmung zwischen den Messungen und Rechnungen erzielt werden. Die Ergebnisse haben gezeigt, dass durch eine geeignete Wahl der Elektrodenkonfiguration und der Elektrodenpositionierung im Brennernahbereich eine Zuendenergieminimierung erreicht werden kann. Gleichzeitig wurde ein Kriterium entwickelt, das zur Erarbeitung von Kennfeldern und Auslegungsvorschriften fuer Gasbrenner genutzt werden kann. Mit Hilfe des kommerziellen CFD-Programms FLUENT kann die Mischungs-, Stroemungs- und Turbulenzsituation eines Brenners numerisch berechnet werden. Mittels dieser Ergebnisse und unter Anwendung des ermittelten Zuendkriteriums kann die Erstellung von Arbeits- und Zuendkennfeldern fuer die Neuentwicklung bzw. Verbesserung von Industriegasbrennern unterstuetzt und somit der experimentelle Aufwand minimiert werden. (orig.)

  19. Injury of the ankle joint ligaments; Bandverletzungen des Sprunggelenks

    Energy Technology Data Exchange (ETDEWEB)

    Breitenseher, M.J. [Institut fuer Radiologie, Landesklinikum Waldviertel Horn, Horn (Austria); Karl Landsteiner Institut, St. Poelten (Austria)

    2007-03-15

    The diagnosis of lateral collateral ankle ligament trauma is based on patient history, clinical examination and clinical stress tests. If the clinical stress test is positive, stress radiography can be performed. There is, however, no consensus about the usefulness of stress radiography in acute ankle sprain, and in particular about the cut-off talar tilt angle beyond which a two-ligament rupture would be certain, ranging from 5 to 30 . Today, magnetic resonance imaging (MRI) is not used in this area, although it does allow controlled positioning of the foot and defined section visualization of injured lateral collateral ankle ligaments. In acute and chronic sinus tarsi injuries, MRI forms the established basis for diagnostic imaging, and can provide a definitive answer in most cases. MRI is also the method of choice for chronic posttraumatic pain with anterolateral impingement after rupture of the anterior talofibular ligament. Generally, for the evaluation of acute ankle injuries, MRI has developed to be the most important second-step procedure when projection radiology is non-diagnostic. (orig.) [German] Die Diagnose einer lateralen Bandverletzung nach einem Sprunggelenktrauma basiert auf der Anamnese, der klinischen Untersuchung und klinischen Stresstests. Bei positiven klinischen Stresstests kann eine Stressradiographie durchgefuehrt werden. Es gibt keine Uebereinstimmung hinsichtlich des Stellenwerts der Stressradiographie beim frischen Supinationstrauma des Sprunggelenks, insbesondere fuer den Winkel der Aufklappbarkeit bei einer Zweibandverletzung, der von 5 -30 reicht. Die MRT wird bei dieser Indikation zurzeit nur in Einzelfaellen benutzt, obwohl sie mit definierter Fusspositionierung und Ausrichtung der Untersuchungsebene eine ausgezeichnete Beurteilung der Sprunggelenkbaender erlaubt. Sie ist im besonderen Masse geeignet, akute und chronische Verletzungen des Sinus tarsi zu beurteilen. Bei chronischen Beschwerden nach Bandverletzung ist die MRT zur

  20. German Environmental Information Network - GEIN; Grundlagen der Umweltpolitik, Umweltstrategien. Umweltinformationsnetz Deutschland - GEIN

    Energy Technology Data Exchange (ETDEWEB)

    Bandholtz, T.

    2001-05-01

    The German Environmental Information Network (GEIN) consolidates a wide range of information currently distributed across many different Web sites run by public institutions in Germany, such as environmental authorities, agencies and ministries at the federal and Land (state) levels. The 'Portal to German Environmental Information' offers an easy-to-use access for any internet user by one single address, supporting the choice of search conditions through thesaurus-terms, geographic names, and an interactive environmental calendar. Behind that a unique XML namespace giving a solid semantic ground to bhe communication between the information providers and their 'broker'. GEIN supports automatic, thesaurus-based indexing, and a fast broadcasting mechanism (XML via HTTP) for queries that cannot be processed using the index only. Since GEIN has been inaugurated on June 9th, 2000, it has found a broad acceptance in the general public as well as with the professionals. (orig.) [German] Das Umweltinformationsnetz Deutschland (GEIN) vereint ein weites Spektrum an Umweltinformation von oeffentlichen Einrichtungen und Behoerden im Internet, die zuvor allein ueber zahlreiche individuelle Websites erreichbar war. Das 'Portal der Deutschen Umweltinformation' bietet jedem Internetbenutzer zu diesen Informationen einen umkomplizierten Zugang ueber eine einzige Adresse. Darueber hinaus erhaelt der Benutzer vielfaeltige Unterstuetzung bei der Wahl geeigneter Suchbedingungen durch Fach-Vokabular, geografische Namen und einen interaktiven Umweltkalender. Dahinter steht ein eigener XML-'Namensraum' (namespace), der die Kommunikation zwischen den einzelnen Informationsanbietern und ihrem gemeinsamen 'Broker' auf eine stabile semantische Grundlage stellt. GEIN verfuegt ueber ein thesaurus-basiertes Indizierungsverfahren, sowie ueber einen schnellen Verteilungs-mechanismus fuer Anfragen, die nicht aus dem Index beantwortet werden koennen