WorldWideScience

Sample records for fuel service centers

  1. Accounting for Unliquidated Obligations for the Defense Fuel Supply Center

    National Research Council Canada - National Science Library

    1996-01-01

    .... The Defense Finance and Accounting Service (DFAS) Columbus Center, Columbus, Ohio, and the Defense Fuel Supply Center share responsibility for accurate accounting information and financial reporting...

  2. International nuclear service centers: a bibliography

    International Nuclear Information System (INIS)

    Petty, G.M.; Yokota, M.

    1978-03-01

    The literature relating specifically to international nuclear fuel service centers would appear to be relatively scarce, based on the results of searches of the Energy Data Base, the libraries of the University of California at Los Angeles, and The Rand Corporation, and other sources. Works specifically relating to international service centers are annotated in this bibliography. Also listed, without annotation, are studies of various kinds of multinational public enterprises. In addition, there are references to many of the studies of the one-nation nuclear energy center concept. Most of these resulted from the survey of possible sites for these centers mandated by the US Energy Reorganization Act of 1974

  3. Alternative Fuels Data Center: Biodiesel

    Science.gov (United States)

    Biodiesel Printable Version Share this resource Send a link to Alternative Fuels Data Center : Biodiesel to someone by E-mail Share Alternative Fuels Data Center: Biodiesel on Facebook Tweet about Alternative Fuels Data Center: Biodiesel on Twitter Bookmark Alternative Fuels Data Center: Biodiesel on

  4. Large-scale fuel cycle centers

    International Nuclear Information System (INIS)

    Smiley, S.H.; Black, K.M.

    1977-01-01

    The United States Nuclear Regulatory Commission (NRC) has considered the nuclear energy center concept for fuel cycle plants in the Nuclear Energy Center Site Survey - 1975 (NECSS-75) -- an important study mandated by the U.S. Congress in the Energy Reorganization Act of 1974 which created the NRC. For the study, NRC defined fuel cycle centers to consist of fuel reprocessing and mixed oxide fuel fabrication plants, and optional high-level waste and transuranic waste management facilities. A range of fuel cycle center sizes corresponded to the fuel throughput of power plants with a total capacity of 50,000 - 300,000 MWe. The types of fuel cycle facilities located at the fuel cycle center permit the assessment of the role of fuel cycle centers in enhancing safeguarding of strategic special nuclear materials -- plutonium and mixed oxides. Siting of fuel cycle centers presents a considerably smaller problem than the siting of reactors. A single reprocessing plant of the scale projected for use in the United States (1500-2000 MT/yr) can reprocess the fuel from reactors producing 50,000-65,000 MWe. Only two or three fuel cycle centers of the upper limit size considered in the NECSS-75 would be required in the United States by the year 2000 . The NECSS-75 fuel cycle center evaluations showed that large scale fuel cycle centers present no real technical difficulties in siting from a radiological effluent and safety standpoint. Some construction economies may be attainable with fuel cycle centers; such centers offer opportunities for improved waste management systems. Combined centers consisting of reactors and fuel reprocessing and mixed oxide fuel fabrication plants were also studied in the NECSS. Such centers can eliminate not only shipment of plutonium, but also mixed oxide fuel. Increased fuel cycle costs result from implementation of combined centers unless the fuel reprocessing plants are commercial-sized. Development of plutonium-burning reactors could reduce any

  5. Alternative Fuels Data Center: Natural Gas

    Science.gov (United States)

    Natural Gas Printable Version Share this resource Send a link to Alternative Fuels Data Center : Natural Gas to someone by E-mail Share Alternative Fuels Data Center: Natural Gas on Facebook Tweet about Alternative Fuels Data Center: Natural Gas on Twitter Bookmark Alternative Fuels Data Center: Natural Gas on

  6. Alternative Fuels Data Center: Krug Energy Opens Natural Gas Fueling

    Science.gov (United States)

    Station in Arkansas Krug Energy Opens Natural Gas Fueling Station in Arkansas to someone by E -mail Share Alternative Fuels Data Center: Krug Energy Opens Natural Gas Fueling Station in Arkansas on Facebook Tweet about Alternative Fuels Data Center: Krug Energy Opens Natural Gas Fueling Station in

  7. Alternative Fuels Data Center: Natural Gas Benefits

    Science.gov (United States)

    Benefits to someone by E-mail Share Alternative Fuels Data Center: Natural Gas Benefits on Facebook Tweet about Alternative Fuels Data Center: Natural Gas Benefits on Twitter Bookmark Alternative Fuels Data Center: Natural Gas Benefits on Google Bookmark Alternative Fuels Data Center: Natural Gas

  8. Alternative Fuels Data Center: Biodiesel Equipment Options

    Science.gov (United States)

    Equipment Options to someone by E-mail Share Alternative Fuels Data Center: Biodiesel Equipment Options on Facebook Tweet about Alternative Fuels Data Center: Biodiesel Equipment Options on Twitter Bookmark Alternative Fuels Data Center: Biodiesel Equipment Options on Google Bookmark Alternative Fuels

  9. Alternative Fuels Data Center: Biodiesel Benefits

    Science.gov (United States)

    , and transport. Maps & Data U.S. Biodiesel Production, Exports, and Consumption U.S. Biodiesel Benefits to someone by E-mail Share Alternative Fuels Data Center: Biodiesel Benefits on Facebook Tweet about Alternative Fuels Data Center: Biodiesel Benefits on Twitter Bookmark Alternative Fuels Data

  10. Alternative Fuels Data Center: Natural Gas Vehicles

    Science.gov (United States)

    Natural Gas Printable Version Share this resource Send a link to Alternative Fuels Data Center : Natural Gas Vehicles to someone by E-mail Share Alternative Fuels Data Center: Natural Gas Vehicles on Facebook Tweet about Alternative Fuels Data Center: Natural Gas Vehicles on Twitter Bookmark Alternative

  11. Fuel element services

    International Nuclear Information System (INIS)

    Marta, H.; Alvarez, P.; Jimenez, J.

    2006-01-01

    Refuelling outages comprise a number of maintenance tasks scheduled long in advance to assure a reliable operation throughout the next cycle and, in the long run, a safer and more efficient plant. Most of these tasks are routine service of mechanical and electrical system and likewise fuel an be considered a critical component as to handling, inspection, cleaning and repair. ENUSA-ENWESA AIE has been working in this area since 1995 growing from fuel repair to a more integrated service that includes new and spent fuel handling, inserts, failed fuel rod detection systems, ultrasonic fuel cleaning, fuel repair and a comprehensive array of inspection and tests related to the reliability of the mechanical components in the fuel assembly, all this, performed in compliance with quality, safety, health physics and any other nuclear standard. (Author)

  12. Alternative Fuels Data Center: Conventional Natural Gas Production

    Science.gov (United States)

    Conventional Natural Gas Production to someone by E-mail Share Alternative Fuels Data Center : Conventional Natural Gas Production on Facebook Tweet about Alternative Fuels Data Center: Conventional Natural Gas Production on Twitter Bookmark Alternative Fuels Data Center: Conventional Natural Gas Production

  13. Alternative Fuels Data Center: Diesel Vehicles Using Biodiesel

    Science.gov (United States)

    Biodiesel Printable Version Share this resource Send a link to Alternative Fuels Data Center : Diesel Vehicles Using Biodiesel to someone by E-mail Share Alternative Fuels Data Center: Diesel Vehicles Using Biodiesel on Facebook Tweet about Alternative Fuels Data Center: Diesel Vehicles Using Biodiesel

  14. KNF's fuel service technologies and experiences

    International Nuclear Information System (INIS)

    Shin, Jung Cheol; Kwon, Jung Tack; Kim, Jaeik; Park, Jong Youl; Kim, Yong Chan

    2009-01-01

    In Korea, since 1978, the commercial nuclear power plant was operated. After 10 years, from 1988, the nuclear fuel was produced by KNF (Korea Nuclear Fuel). The Fuel Service Team was established at KNF in 1995. Through the technical self reliance periods in cooperate with advanced foreign companies for 5 years, KNF has started to carry out fuel service activities onsite in domestic nuclear power plants. By ceaseless improving and advancing our own methodologies, after that, KNF is able to provide the most safe and reliable fuel repair services and poolside examinations including the root cause analysis of failed fuels. Recently, KNF developed the fuel cleaning system using ultrasonic technique for crud removal, and the CANDU fuel sipping system to detect a failed fuel bundle in PHWR. In this paper, all of KNF's fuel service technologies are briefly described, and the gained experience in shown

  15. Alternative Fuels Data Center: How Do Fuel Cell Electric Vehicles Work

    Science.gov (United States)

    vehicles. Hydrogen car image Key Components of a Hydrogen Fuel Cell Electric Car Battery (auxiliary): In an Using Hydrogen? Fuel Cell Electric Vehicles Work Using Hydrogen? to someone by E-mail Share Alternative Fuels Data Center: How Do Fuel Cell Electric Vehicles Work Using Hydrogen? on Facebook Tweet about

  16. Alternative Fuels Data Center: Colorado Airport Relies on Natural Gas

    Science.gov (United States)

    Fueling Stations Colorado Airport Relies on Natural Gas Fueling Stations to someone by E-mail Share Alternative Fuels Data Center: Colorado Airport Relies on Natural Gas Fueling Stations on Facebook Tweet about Alternative Fuels Data Center: Colorado Airport Relies on Natural Gas Fueling Stations on

  17. Alternative Fuels Data Center: Seattle Bakery Delivers With Biodiesel

    Science.gov (United States)

    Trucks Seattle Bakery Delivers With Biodiesel Trucks to someone by E-mail Share Alternative Fuels Data Center: Seattle Bakery Delivers With Biodiesel Trucks on Facebook Tweet about Alternative Fuels Data Center: Seattle Bakery Delivers With Biodiesel Trucks on Twitter Bookmark Alternative Fuels

  18. Economic feasibility study of regional centers for nuclear fuel reprocessing in the developing countries

    International Nuclear Information System (INIS)

    Bakeshloo, A.A.

    1977-01-01

    The fuel cycle costs for the following three different economic alternatives were studied: (1) Reprocessing in an industrialized country (such as the U.S.); (2) Reprocessing in the individual developing country; (3) Reprocessing in a regional center. The nuclear fuel cycle cost for the ''Throw-away'' fuel cycle was evaluated. Among the six regions which were considered in this study, region one (South America including Mexico) was selected for the economic analysis of the nuclear fuel cycle for the above three alternatives. For evaluation of the cases where the fuel is reprocessed in a regional center or in an individual developing country, a unit reprocessing cost equation was developed. An economic evaluation was developed to estimate the least expensive method for transporting radioactive nuclear material by either leased or purchased shipping casks. The necessary equations were also developed for estimating plutonium transportation and the safeguard costs. On the basis of nuclear material and services requirements and unit costs for each component, the levelized nuclear fuel cycle costs for each alternative were estimated. Finally, by a comparison of cost, among these three alternatives plus the ''Throw-away'' case,it was found that it is not at all economical to build individual reprocessing plants inside the developing countries in region one. However, it also was found that the economic advantage of a regional center with respect to the first alternative is less than a 4% difference between their total fuel cycle costs. It is concluded that there is no great economic advantage in any developing countries to seek to process their fuel in one of the advanced countries. Construction of regional reprocessing centers is an economically viable concept

  19. Alternative Fuels Data Center: Signage for Plug-In Electric Vehicle

    Science.gov (United States)

    Send a link to Alternative Fuels Data Center: Signage for Plug-In Electric Vehicle Charging Stations to someone by E-mail Share Alternative Fuels Data Center: Signage for Plug-In Electric Vehicle Charging Stations on Facebook Tweet about Alternative Fuels Data Center: Signage for Plug-In Electric Vehicle

  20. Alternative Fuels Data Center: Phoenix Cleans Up with Natural Gas

    Science.gov (United States)

    Phoenix Cleans Up with Natural Gas to someone by E-mail Share Alternative Fuels Data Center : Phoenix Cleans Up with Natural Gas on Facebook Tweet about Alternative Fuels Data Center: Phoenix Cleans Up with Natural Gas on Twitter Bookmark Alternative Fuels Data Center: Phoenix Cleans Up with Natural

  1. Can fuel services supply be secured? Building trust in a multi-lateral approach to nuclear fuel cycles

    Energy Technology Data Exchange (ETDEWEB)

    Antoine, B. [Engineering Systems Division, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Room E40-261, Cambridge, MA 02139 (United States); Rodriguez-Vieitez, E. [Belfer Center for Science and International Affairs, Kennedy School of Government, Harvard University, One Brattle Sq., Room 503, Cambridge, MA 02138 (United States)

    2009-06-15

    Global climate change and concerns about energy supply security fuelling the nuclear desires of an increasing number of states, there is growing interest within the nonproliferation community to promote the establishment of an international system for the provision of nuclear fuel cycle services that would be 'equitable and accessible to all users of nuclear energy' (Rauf, 2008) while reducing proliferation risks. Although the idea was already voiced on the cradle of civilian use of nuclear energy (Baruch, 1946), the IAEA director's 2003 call for a group of international experts to examine the issue (ElBaradei, 2003) triggered renewed interest that resulted in up to twelve different proposals for multilateral nuclear fuel cycle arrangements (Rauf, 2008; Simpson, 2008). Nonproliferation experts have examined the conditions under which equitable and accessible access to enrichment, reprocessing and spent fuel disposal services can be granted to all users (Rauf, 2008; Braun 2006; Pellaud and al 2005). They suggested putting together multilateral nuclear approaches (MNA) that could consist in the establishment of mechanisms to assure fuel cycle services, or the shared ownership by recipient and host countries of fuel services facilities through either the creation of new multilateral centers or the conversion of existing national facilities into multinational enterprises. While countries that possess nuclear fuel facilities would benefit from the increased global security and strengthened non-proliferation situation that would result from the establishment of these MNAs, they would also be baited into participating by possible attraction of foreign investments as well as the opportunity to export high value services (Rushkin, 2006). Yet, what incentives would there be for a recipient non-nuclear state to participate in an arrangement that would intrinsically strip it of its sovereign right to ensure its fuel supply security? In addition to the economic

  2. Regional nuclear fuel cycle centers study project

    International Nuclear Information System (INIS)

    Bennett, L.; Catlin, R.G.; Meckoni, V.

    1977-01-01

    The concept of regional fuel cycle centers (RFCC) has attracted wide interest. The concept was endorsed by many countries in discussions at the General Conference of the International Atomic Energy Agency and at the General Assembly of the United Nations. Accordingly, in 1975, the IAEA initiated a detailed study of the RFCC concept. The Agency study has concentrated on what is referred to as the ''back-end'' of the fuel cycle because that is the portion which is currently problematic. The study covers transport, storage, processing and recycle activities starting from the time the spent fuel leaves the reactor storage pools and through all steps until the recycled fuel is in finished fuel elements and shipped to the reactor. A detailed evaluation of the specific features of large regional fuel cycle centers established on a multinational basis vis-a-vis smaller dispersed fuel cycle facilities set up on a national basis has been carried out. The methodology for assessment of alternative strategies for fuel storage, reprocessing, and recycling of plutonium has been developed, characteristic data on material flows and cost factors have been generated, and an analytic system has been developed to carry out such evaluations including appropriate sensitivity analysis. Studies in related areas on institutional and legal, organizational, environmental, materials control and other essential aspects have also been made. The material developed during the course of this Study would enable any group of interested Member States to examine and work out alternative strategies pertinent to their present and projected nuclear fuel cycle needs, as well as evolve institutional, legal and other appropriate frameworks or agreements for the establishment of fuel cycle centers on a multinational cooperative basis

  3. New camera systems for fuel services

    International Nuclear Information System (INIS)

    Hummel, W.; Beck, H.J.

    2010-01-01

    AREVA NP Fuel Services have many years of experience in visual examination and measurements on fuel assemblies and associated core components by using state of the art cameras and measuring technologies. The used techniques allow the surface and dimensional characterization of materials and shapes by visual examination. New enhanced and sophisticated technologies for fuel services f. e. are two shielded color camera systems for use under water and close inspection of a fuel assembly. Nowadays the market requirements for detecting and characterization of small defects (lower than the 10th of one mm) or cracks and analyzing surface appearances on an irradiated fuel rod cladding or fuel assembly structure parts have increased. Therefore it is common practice to use movie cameras with higher resolution. The radiation resistance of high resolution CCD cameras is in general very low and it is not possible to use them unshielded close to a fuel assembly. By extending the camera with a mirror system and shielding around the sensitive parts, the movie camera can be utilized for fuel assembly inspection. AREVA NP Fuel Services is now equipped with such kind of movie cameras. (orig.)

  4. KNF's fuel service technologies and experiences

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Jung Cheol; Kwon, Jung Tack; Kim, Jaeik; Park, Jong Youl; Kim, Yong Chan [KNF, Daejeon (Korea, Republic of)

    2009-04-15

    In Korea, since 1978, the commercial nuclear power plant was operated. After 10 years, from 1988, the nuclear fuel was produced by KNF (Korea Nuclear Fuel). The Fuel Service Team was established at KNF in 1995. Through the technical self reliance periods in cooperate with advanced foreign companies for 5 years, KNF has started to carry out fuel service activities onsite in domestic nuclear power plants. By ceaseless improving and advancing our own methodologies, after that, KNF is able to provide the most safe and reliable fuel repair services and poolside examinations including the root cause analysis of failed fuels. Recently, KNF developed the fuel cleaning system using ultrasonic technique for crud removal, and the CANDU fuel sipping system to detect a failed fuel bundle in PHWR. In this paper, all of KNF's fuel service technologies are briefly described, and the gained experience in shown.

  5. Fuel cycle services

    International Nuclear Information System (INIS)

    Gruber, Gerhard J.

    1990-01-01

    TRIGA reactor operators are increasingly concerned about the back end of their Fuel Cycle due to a new environmental policy in the USA. The question how to close the Fuel Cycle will have to be answered by all operators sooner or later. Reprocessing of the TRIGA fuel elements is not available. Only long term storage and final disposal can be considered. But for such a storage or disposal a special treatment of the fuel elements and of course a final depository is necessary. NUKEM plans to undertake efforts to assist the TRIGA operators in this area. For that reason we need to know your special needs for today and tomorrow - so that potential processors can consider whether to offer these services on the market. (orig.)

  6. Alternative Fuels Data Center: Pennsylvania School Buses Run on Natural Gas

    Science.gov (United States)

    Pennsylvania School Buses Run on Natural Gas to someone by E-mail Share Alternative Fuels Data Center: Pennsylvania School Buses Run on Natural Gas on Facebook Tweet about Alternative Fuels Data Center: Pennsylvania School Buses Run on Natural Gas on Twitter Bookmark Alternative Fuels Data Center

  7. Alternative Fuels Data Center: How Do Diesel Vehicles Work Using Biodiesel?

    Science.gov (United States)

    Diesel Vehicles Work Using Biodiesel? to someone by E-mail Share Alternative Fuels Data Center: How Do Diesel Vehicles Work Using Biodiesel? on Facebook Tweet about Alternative Fuels Data Center: How Do Diesel Vehicles Work Using Biodiesel? on Twitter Bookmark Alternative Fuels Data Center: How Do

  8. Alternative Fuels Data Center: Alabama City Leads With Biodiesel and

    Science.gov (United States)

    Ethanol Alabama City Leads With Biodiesel and Ethanol to someone by E-mail Share Alternative Fuels Data Center: Alabama City Leads With Biodiesel and Ethanol on Facebook Tweet about Alternative Fuels Data Center: Alabama City Leads With Biodiesel and Ethanol on Twitter Bookmark Alternative Fuels

  9. Alternative Fuels Data Center: Biodiesel Truck Transports Capitol Christmas

    Science.gov (United States)

    Tree Biodiesel Truck Transports Capitol Christmas Tree to someone by E-mail Share Alternative Fuels Data Center: Biodiesel Truck Transports Capitol Christmas Tree on Facebook Tweet about Alternative Fuels Data Center: Biodiesel Truck Transports Capitol Christmas Tree on Twitter Bookmark Alternative

  10. Alternative Fuels Data Center: Central Ohio Turns Trash Into Natural Gas

    Science.gov (United States)

    Central Ohio Turns Trash Into Natural Gas to someone by E-mail Share Alternative Fuels Data Center : Central Ohio Turns Trash Into Natural Gas on Facebook Tweet about Alternative Fuels Data Center: Central Ohio Turns Trash Into Natural Gas on Twitter Bookmark Alternative Fuels Data Center: Central Ohio Turns

  11. Energy Frontier Research Center, Center for Materials Science of Nuclear Fuels

    International Nuclear Information System (INIS)

    Allen, Todd R.

    2011-01-01

    The Office of Science, Basic Energy Sciences, has funded the INL as one of the Energy Frontier Research Centers in the area of material science of nuclear fuels. This document is the required annual report to the Office of Science that outlines the accomplishments for the period of May 2010 through April 2011. The aim of the Center for Material Science of Nuclear Fuels (CMSNF) is to establish the foundation for predictive understanding of the effects of irradiation-induced defects on thermal transport in oxide nuclear fuels. The science driver of the center's investigation is to understand how complex defect and microstructures affect phonon mediated thermal transport in UO2, and achieve this understanding for the particular case of irradiation-induced defects and microstructures. The center's research thus includes modeling and measurement of thermal transport in oxide fuels with different levels of impurities, lattice disorder and irradiation-induced microstructure, as well as theoretical and experimental investigation of the evolution of disorder, stoichiometry and microstructure in nuclear fuel under irradiation. With the premise that thermal transport in irradiated UO2 is a phonon-mediated energy transport process in a crystalline material with defects and microstructure, a step-by-step approach will be utilized to understand the effects of types of defects and microstructures on the collective phonon dynamics in irradiated UO2. Our efforts under the thermal transport thrust involved both measurement of diffusive phonon transport (an approach that integrates over the entire phonon spectrum) and spectroscopic measurements of phonon attenuation/lifetime and phonon dispersion. Our distinct experimental efforts dovetail with our modeling effort involving atomistic simulation of phonon transport and prediction of lattice thermal conductivity using the Boltzmann transport framework.

  12. Alternative Fuels Data Center: Yellowstone Park Recycles Vehicle Batteries

    Science.gov (United States)

    for Solar Power Yellowstone Park Recycles Vehicle Batteries for Solar Power to someone by E -mail Share Alternative Fuels Data Center: Yellowstone Park Recycles Vehicle Batteries for Solar Power on Facebook Tweet about Alternative Fuels Data Center: Yellowstone Park Recycles Vehicle Batteries

  13. Alternative Fuels Data Center: Recycled Cooking Oil Powers Biodiesel

    Science.gov (United States)

    Vehicles in Vermont Recycled Cooking Oil Powers Biodiesel Vehicles in Vermont to someone by E -mail Share Alternative Fuels Data Center: Recycled Cooking Oil Powers Biodiesel Vehicles in Vermont on Facebook Tweet about Alternative Fuels Data Center: Recycled Cooking Oil Powers Biodiesel Vehicles in

  14. Alternative Fuels Data Center: Landfills Convert Biogas Into Renewable

    Science.gov (United States)

    Natural Gas Landfills Convert Biogas Into Renewable Natural Gas to someone by E-mail Share Alternative Fuels Data Center: Landfills Convert Biogas Into Renewable Natural Gas on Facebook Tweet about Alternative Fuels Data Center: Landfills Convert Biogas Into Renewable Natural Gas on Twitter Bookmark

  15. Alternative Fuels Data Center: Hybrid Electric Vehicles

    Science.gov (United States)

    . A wide variety of hybrid electric vehicle models is currently available. Although HEVs are often -go traffic), further improving fuel economy. Mild hybrid systems cannot power the vehicle using Hybrid Electric Vehicles to someone by E-mail Share Alternative Fuels Data Center: Hybrid Electric

  16. Fuel Cycle Services The Heart of Nuclear Energy

    International Nuclear Information System (INIS)

    Soedyartomo-Soentono

    2007-01-01

    Fuel is essential for development whether for survival and or wealth creation purposes. In this century the utilization of fuels need to be improved although energy mix is still to be the most rational choice. The large amount utilization of un-renewable fossil has some disadvantages since its low energy content requires massive extraction, transport, and processing while emitting CO 2 resulting degradation of the environment. In the mean time the advancement of nuclear science and technology has improved significantly the performance of nuclear power plant management of radioactive waste, enhancement of proliferation resistance, and more economic competitiveness. Ever since the last decade of the last century the nuclear renaissance has taken place. This is also due to the fact that nuclear energy does not emit GHG. Although the nuclear fuel offers a virtually limitless source of economic energy, it is only so if the nuclear fuel is reprocessed and recycled. Consequently, the fuel cycle is to be even more of paramount important in the future. The infrastructure of the fuel cycle services world wide has been adequately available. Various International Initiatives to access the fuel cycle services are also offered. However, it is required to put in place the International Arrangements to guaranty secured sustainable supply of services and its peaceful use. Relevant international cooperations are central for proceeding with the utilization of nuclear energy, while this advantagous nuclear energy utilization relies on the fuel cycle services. It is therefore concluded that the fuel cycle services are the heart of nuclear energy, and the international nuclear community should work together to maintain the availability of this nuclear fuel cycle services timely, sufficiently, and economically. (author)

  17. Fuel Cycle Services the Heart of Nuclear Energy

    Directory of Open Access Journals (Sweden)

    S. Soentono

    2007-01-01

    Full Text Available Fuel is essential for development whether for survival and or wealth creation purposes. In this century the utilization of fuels need to be improved although energy mix is still to be the most rational choice. The large amount utilization of un-renewable fossil has some disadvantages since its low energy content requires massive extraction, transport, and processing while emitting CO2 resulting degradation of the environment. In the mean time the advancement of nuclear science and technology has improved significantly the performance of nuclear power plant, management of radioactive waste, enhancement of proliferation resistance, and more economic competitiveness. Ever since the last decade of the last century the nuclear renaissance has taken place. This is also due to the fact that nuclear energy does not emit GHG. Although the nuclear fuel offers a virtually limitless source of economic energy, it is only so if the nuclear fuel is reprocessed and recycled. Consequently, the fuel cycle is to be even more of paramount important in the future. The infrastructure of the fuel cycle services worldwide has been adequately available. Various International Initiatives to access the fuel cycle services are also offered. However, it is required to put in place the International Arrangements to guaranty secured sustainable supply of services and its peaceful use. Relevant international co-operations are central for proceeding with the utilization of nuclear energy, while this advantageous nuclear energy utilization relies on the fuel cycle services. It is therefore concluded that the fuel cycle services are the heart of nuclear energy, and the international nuclear community should work together to maintain the availability of this nuclear fuel cycle services timely, sufficiently, and economically.

  18. Orion Crew Module / Service Module Structural Weight and Center of Gravity Simulator and Vehicle Motion Simulator Hoist Structure for Orion Service Module Umbilical Testing

    Science.gov (United States)

    Ascoli, Peter A.; Haddock, Michael H.

    2014-01-01

    An Orion Crew Module Service Module Structural Weight and Center of Gravity Simulator and a Vehicle Motion Simulator Hoist Structure for Orion Service Module Umbilical Testing were designed during a summer 2014 internship in Kennedy Space Centers Structures and Mechanisms Design Branch. The simulator is a structure that supports ballast, which will be integrated into an existing Orion mock-up to simulate the mass properties of the Exploration Mission-1 flight vehicle in both fueled and unfueled states. The simulator mimics these configurations through the use of approximately 40,000 lbf of steel and water ballast, and a steel support structure. Draining four water tanks, which house the water ballast, transitions the simulator from the fueled to unfueled mass properties. The Ground Systems Development and Operations organization will utilize the simulator to verify and validate equipment used to maneuver and transport the Orion spacecraft in its fueled and unfueled configurations. The second design comprises a cantilevered tripod hoist structure that provides the capability to position a large Orion Service Module Umbilical in proximity to the Vehicle Motion Simulator. The Ground Systems Development and Operations organization will utilize the Vehicle Motion Simulator, with the hoist structure attached, to test the Orion Service Module Umbilical for proper operation prior to installation on the Mobile Launcher. Overall, these two designs provide NASA engineers viable concepts worthy of fabricating and placing into service to prepare for the launch of Orion in 2017.

  19. Alternative Fuels Data Center: New Hampshire Fleet Revs up With Natural Gas

    Science.gov (United States)

    New Hampshire Fleet Revs up With Natural Gas to someone by E-mail Share Alternative Fuels Data Center: New Hampshire Fleet Revs up With Natural Gas on Facebook Tweet about Alternative Fuels Data Center: New Hampshire Fleet Revs up With Natural Gas on Twitter Bookmark Alternative Fuels Data Center

  20. Alternative Fuels Data Center: Cities Make the Clean Switch to Natural Gas

    Science.gov (United States)

    Cities Make the Clean Switch to Natural Gas to someone by E-mail Share Alternative Fuels Data Center: Cities Make the Clean Switch to Natural Gas on Facebook Tweet about Alternative Fuels Data Center : Cities Make the Clean Switch to Natural Gas on Twitter Bookmark Alternative Fuels Data Center: Cities

  1. Alternative Fuels Data Center: Wisconsin Reduces Emissions With Natural Gas

    Science.gov (United States)

    Trucks Wisconsin Reduces Emissions With Natural Gas Trucks to someone by E-mail Share Alternative Fuels Data Center: Wisconsin Reduces Emissions With Natural Gas Trucks on Facebook Tweet about Alternative Fuels Data Center: Wisconsin Reduces Emissions With Natural Gas Trucks on Twitter Bookmark

  2. Alternative Fuels Data Center: Renewable Natural Gas From Landfill Powers

    Science.gov (United States)

    Refuse Vehicles Renewable Natural Gas From Landfill Powers Refuse Vehicles to someone by E-mail Share Alternative Fuels Data Center: Renewable Natural Gas From Landfill Powers Refuse Vehicles on Facebook Tweet about Alternative Fuels Data Center: Renewable Natural Gas From Landfill Powers Refuse

  3. Alternative Fuels Data Center: Hybrid and Plug-In Electric Vehicle

    Science.gov (United States)

    Conversions Hybrid and Plug-In Electric Vehicle Conversions to someone by E-mail Share Alternative Fuels Data Center: Hybrid and Plug-In Electric Vehicle Conversions on Facebook Tweet about Alternative Fuels Data Center: Hybrid and Plug-In Electric Vehicle Conversions on Twitter Bookmark Alternative

  4. Experience of Areva in fuel services for PWR and BWR

    International Nuclear Information System (INIS)

    Morales, I.

    2015-01-01

    AREVA being an integrated supplier of fuel assemblies has included in its strategy to develop services and solutions to customers who desire to improve the performance and safety of their fuel. These services go beyond the simple 'after sale' services that can be expected from a fuel supplier: The portfolio of AREVA includes a wide variety of services, from scientific calculations to fuel handling services in a nuclear power plant. AREVA is committed to collaborate and to propose best-in-class solutions that really make the difference for the customer, based on 40 years of Fuel design and manufacturing experience. (Author)

  5. Improvement of the center boring device for the irradiated fuel pellets

    Energy Technology Data Exchange (ETDEWEB)

    Usami, Koji; Onozawa, Atsushi; Kimura, Yasuhiko; Sakuraba, Naotoshi; Shiina, Hidenori; Harada, Akito; Nakata, Masahito [Japan Atomic Energy Agency, Nuclear Science Research Inst., Tokai, Ibaraki (Japan)

    2012-03-15

    The power ramp tests performed at JMTR in Oarai R and D Center are objected to study the safety margin of the high burnup fuels. One of the important parameters measured during this test is the center temperature of the fuel pellet. For this measurement, a thermocouple is installed into the hole bored at the pellet center by the center boring device, which can fix the fuel pellet with the frozen CO{sub 2} gas during its boring process. At the Reactor Fuel Examination Facility (RFEF) in Tokai R and D Center, several improvements were applied for the previous boring device to gain its performance and reliability. The major improvements are the change of the drill bit, modification of the boring process and the optimization of the remote operability. The mock-up test will be performed with the irradiated fuel pellet to confirm the benefit of improvement. This study was conducted under a contract with the Nuclear and Industrial Safety Agency (NISA) of the Ministry of Economy, Trade and Industry (METI). (author)

  6. Birthing Centers and Hospital Maternity Services

    Science.gov (United States)

    ... Educators Search English Español Birthing Centers and Hospital Maternity Services KidsHealth / For Parents / Birthing Centers and Hospital Maternity Services What's in this article? Giving Birth at ...

  7. Fuel cell energy service Enron`s commerical program

    Energy Technology Data Exchange (ETDEWEB)

    Jacobson, M.W.

    1996-04-01

    Enron, the premier provider of clean fuels worldwide, has launched a unique energy service based on fuel cell technology. The goal of this program is to bring the benefits of fuel cell power to the broad commercial marketplace. Enron`s Energy Service is currently based on a 200 kilowatt phosphoric acid power plant manufactured by ONSI Corporation. This plant is fueled by natural gas or propane, and exhibits superior performance. Enron offers a `no hassle` package that provides customers with immediate benefits with no upfront capital or technical risks. This paper describes Enron`s fuel cell commercial program.

  8. Nuclear energy center site survey: fuel cycle studies

    International Nuclear Information System (INIS)

    1976-05-01

    Background information for the Nuclear Regulatory Commission Nuclear Energy Center Site Survey is presented in the following task areas: economics of integrated vs. dispersed nuclear fuel cycle facilities, plutonium fungibility, fuel cycle industry model, production controls and failure contingencies, environmental impact, waste management, emergency response capability, and feasibility evaluations

  9. A multipurpose radiation service center

    International Nuclear Information System (INIS)

    Hofmann, E.-G.

    1977-01-01

    In Germany, AEG-Telefunken has been working as a supplier of irradiation equipment for more than ten years. There is a close cooperation with Radiation Dynamics Inc., Westbury, N.Y. Radiation sources are available for most industrial applications. As a special service AEG is establishing a multipurpose radiation service center in Hamburg-Wedel, Germany. This center will be used by a host of companies to investigate the effects of radiation on a broad range of materials, to develop special processing equipment, to process customer supplied products and to perform R and D work and contracts. Initially this service center will be equipped with one research type High-Power X-ray Unit (200 kV/32 mA) and one industrial type Dynamitron accelerator (1500 kV/37.5 kW). (author)

  10. Alternative Fuels Data Center: Hybrid and Electric Vehicles Boom Coast to

    Science.gov (United States)

    Coast Hybrid and Electric Vehicles Boom Coast to Coast to someone by E-mail Share Alternative Fuels Data Center: Hybrid and Electric Vehicles Boom Coast to Coast on Facebook Tweet about Alternative Fuels Data Center: Hybrid and Electric Vehicles Boom Coast to Coast on Twitter Bookmark Alternative

  11. Alternative Fuels Data Center: Virginia Cleans up With Natural Gas Refuse

    Science.gov (United States)

    Trucks Virginia Cleans up With Natural Gas Refuse Trucks to someone by E-mail Share Alternative Fuels Data Center: Virginia Cleans up With Natural Gas Refuse Trucks on Facebook Tweet about Alternative Fuels Data Center: Virginia Cleans up With Natural Gas Refuse Trucks on Twitter Bookmark Alternative

  12. Alternative Fuels Data Center: Golden Eagle Delivers Beer With Natural Gas

    Science.gov (United States)

    Trucks Golden Eagle Delivers Beer With Natural Gas Trucks to someone by E-mail Share Alternative Fuels Data Center: Golden Eagle Delivers Beer With Natural Gas Trucks on Facebook Tweet about Alternative Fuels Data Center: Golden Eagle Delivers Beer With Natural Gas Trucks on Twitter Bookmark

  13. Alternative Fuels Data Center: Little Rock Gains Momentum with Natural Gas

    Science.gov (United States)

    Buses Little Rock Gains Momentum with Natural Gas Buses to someone by E-mail Share Alternative Fuels Data Center: Little Rock Gains Momentum with Natural Gas Buses on Facebook Tweet about Alternative Fuels Data Center: Little Rock Gains Momentum with Natural Gas Buses on Twitter Bookmark Alternative

  14. Alternative Fuels Data Center: America's Largest Home Runs on Biodiesel in

    Science.gov (United States)

    North Carolina America's Largest Home Runs on Biodiesel in North Carolina to someone by E-mail Share Alternative Fuels Data Center: America's Largest Home Runs on Biodiesel in North Carolina on Facebook Tweet about Alternative Fuels Data Center: America's Largest Home Runs on Biodiesel in North

  15. Alternative Fuels Data Center: St. Louis Airport Relies on Biodiesel and

    Science.gov (United States)

    Natural Gas Vehicles St. Louis Airport Relies on Biodiesel and Natural Gas Vehicles to someone by E-mail Share Alternative Fuels Data Center: St. Louis Airport Relies on Biodiesel and Natural Gas Vehicles on Facebook Tweet about Alternative Fuels Data Center: St. Louis Airport Relies on Biodiesel and

  16. Kraftwerk Union (KWU) nuclear fuel service

    International Nuclear Information System (INIS)

    Knaab, H.; Knecht, K.; Garzarolli, F.

    1977-01-01

    Activities started with the commissioning of the first German nuclear power stations have led to the present form of the nuclear fuel customer service. In the meantime, based on these tasks numerous test and working methods were developed and applied which are now available to operators of nuclear power station. The paper describes the most important methods and instruments and surveys the nuclear fuel service tasks carriedout to date. Past experience has shown that detailed knowledge of design, fabrication as well as the possibility to compose observations with investigations of engineering and hot cell laboratories are prerequisites for successful service performance. The expected trend towards increasing frequency of service activities in the next few years must be taken into account by a continuous expansion in the number of the qualified personnel. It will become necessary for the coordination of the work at an increasing number of reactor plants to conclude long-term service agreements with the customer. (orig.) [de

  17. Methodology for substantiation of the fast reactor fuel element serviceability

    International Nuclear Information System (INIS)

    Tsykanov, V.A.; Maershin, A.A.

    1988-01-01

    Methodological aspects of fast reactor fuel element serviceability substantiation are presented. The choice of the experimental program and strategies of its realization to solve the problem set in short time, taking into account available experimental means, are substantiated. Factors determining fuel element serviceability depending on parameters and operational conditions are considered. The methodological approach recommending separate studing of the factors, which points to the possibility of data acquisition, required for the development of calculational models and substantiation of fuel element serviceability in pilot and experimental reactors, is described. It is shown that the special-purpose data are more useful for the substantiation of fuel element serviceability and analytical method development than unsubstantial and expensive complex tests of fuel elements and fuel assemblies, which should be conducted only at final stages for the improvement of the structure on the whole

  18. Client-Centered Employee Assistance Services.

    Science.gov (United States)

    Bayer, Darryl Lee

    This paper addresses delivery aspects and benefits of client-centered Employee Assistance Program (EAP) services through a review of the literature and research. EAP services are described as educational and mental health services utilized to assist employees and their families to respond constructively to job, personal, interpersonal or…

  19. Energy Frontier Research Center, Center for Materials Science of Nuclear Fuels

    Energy Technology Data Exchange (ETDEWEB)

    Todd R. Allen, Director

    2011-04-01

    The Office of Science, Basic Energy Sciences, has funded the INL as one of the Energy Frontier Research Centers in the area of material science of nuclear fuels. This document is the required annual report to the Office of Science that outlines the accomplishments for the period of May 2010 through April 2011. The aim of the Center for Material Science of Nuclear Fuels (CMSNF) is to establish the foundation for predictive understanding of the effects of irradiation-induced defects on thermal transport in oxide nuclear fuels. The science driver of the center’s investigation is to understand how complex defect and microstructures affect phonon mediated thermal transport in UO2, and achieve this understanding for the particular case of irradiation-induced defects and microstructures. The center’s research thus includes modeling and measurement of thermal transport in oxide fuels with different levels of impurities, lattice disorder and irradiation-induced microstructure, as well as theoretical and experimental investigation of the evolution of disorder, stoichiometry and microstructure in nuclear fuel under irradiation. With the premise that thermal transport in irradiated UO2 is a phonon-mediated energy transport process in a crystalline material with defects and microstructure, a step-by-step approach will be utilized to understand the effects of types of defects and microstructures on the collective phonon dynamics in irradiated UO2. Our efforts under the thermal transport thrust involved both measurement of diffusive phonon transport (an approach that integrates over the entire phonon spectrum) and spectroscopic measurements of phonon attenuation/lifetime and phonon dispersion. Our distinct experimental efforts dovetail with our modeling effort involving atomistic simulation of phonon transport and prediction of lattice thermal conductivity using the Boltzmann transport framework.

  20. Fuel cycle centers revisited: Consolidation of fuel cycle activities in a few countries

    International Nuclear Information System (INIS)

    Kratzer, M.B.

    1996-01-01

    Despite varied expressions, the general impression remains that the international fuel cycle center concept, whatever its merits, is visionary. It also is quite possibly unattainable in light of strong national pressures toward independence and self-sufficiency in all things nuclear. Is the fuel cycle center an idea that has come and gone? Is it an idea whose time has not yet come? Or is it, as this paper suggests, an idea that has already arrived on the scene, attracting little attention or even acknowledgement of its presence? The difficult in answering this questions arises, in part, from the fact that despite its long and obvious appeal, there has been very little systematic analysis of the concept itself. Such obvious questions as how many and where fuel cycle centers should be located; what characteristics should the hot country or countries possess; and what are the institutional forms or features that endow the concept with enhanced proliferation protection have rarely been seriously and systematically addressed. The title of this paper focuses on limiting the geographic spread of fuel cycle facilities, and some may suggest that doing so does not necessarily call for any type of international or multinational arrangements applicable to those that exist. It is a premise of this paper, however, that a restriction on the number of countries possessing sensitive fuel cycle facilities necessarily involves some degree of multinationalization. This is not only because in every instance a nonproliferation pledge and international or multinational safeguards, or both, will be applied to the facility, but also because a restriction on the number of countries possessing these facilities implies that those in existence will serve a multinational market. This feature in itself is an important form of international auspices. Thus, the two concepts--limitation and multinationalization--if not necessarily one and the same, are at least de facto corollaries

  1. Influences of in-fuel physical-chemical processes on serviceability of energy reactor fuel elements

    Energy Technology Data Exchange (ETDEWEB)

    Bibilashvili, Yu K; Nekrasova, G A; Sukhanov, G I

    1989-01-01

    In-fuel physico-chemical processes and their effect on stress corrosion cracking of fuel element zirconium cladding are considered in the review. The mechanism of fission product release from the fuel is studied and the negative role of primarily iodine on the cladding corrosion process is demonstrated. Directions for improving the fuel element claddings and fuel to increase the fuel element serviceability are specified.

  2. Influences of in-fuel physical-chemical processes on serviceability of energy reactor fuel elements

    International Nuclear Information System (INIS)

    Bibilashvili, Yu.K.; Nekrasova, G.A.; Sukhanov, G.I.

    1989-01-01

    In-fuel physico-chemical processes and their effect on stress corrosion cracking of fuel element zirconium cladding are considered in the review. The mechanism of fission product release from the fuel is studied and the negative role of primarily iodine on the cladding corrosion process is demonstrated. Directions for improving the fuel element claddings and fuel to increase the fuel element serviceability are specified

  3. Fuel Line: Defense Energy Support Center. Volume 2

    National Research Council Canada - National Science Library

    2000-01-01

    .... Fuel Line is prepared by desktop publishing applications and designed to provide timely, factual information on policies, plans, operations, and technical developments of the Center and interrelated subject matter...

  4. Energy Frontier Research Center, Center for Materials Science of Nuclear Fuels

    Energy Technology Data Exchange (ETDEWEB)

    Todd R. Allen

    2011-12-01

    This is a document required by Basic Energy Sciences as part of a mid-term review, in the third year of the five-year award period and is intended to provide a critical assessment of the Center for Materials Science of Nuclear Fuels (strategic vision, scientific plans and progress, and technical accomplishments).

  5. Hydrogen-Oxygen PEM Regenerative Fuel Cell Development at NASA Glenn Research Center

    Science.gov (United States)

    Bents, David J.; Scullin, Vincent J.; Chang, B. J.; Johnson, Donald W.; Garcia, Christopher P.; Jakupca, Ian J.

    2006-01-01

    The closed-cycle hydrogen-oxygen PEM regenerative fuel cell (RFC) at NASA Glenn Research Center has demonstrated multiple back to back contiguous cycles at rated power, and round trip efficiencies up to 52 percent. It is the first fully closed cycle regenerative fuel cell ever demonstrated (entire system is sealed: nothing enters or escapes the system other than electrical power and heat). During FY2006 the system has undergone numerous modifications and internal improvements aimed at reducing parasitic power, heat loss and noise signature, increasing its functionality as an unattended automated energy storage device, and in-service reliability. It also serves as testbed towards development of a 600 W-hr/kg flight configuration, through the successful demonstration of lightweight fuel cell and electrolyser stacks and supporting components. The RFC has demonstrated its potential as an energy storage device for aerospace solar power systems such as solar electric aircraft, lunar and planetary surface installations; any airless environment where minimum system weight is critical. Its development process continues on a path of risk reduction for the flight system NASA will eventually need for the manned lunar outpost.

  6. Center for Fuel Cell Research and Applications development phase. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    The deployment and operation of clean power generation is becoming critical as the energy and transportation sectors seek ways to comply with clean air standards and the national deregulation of the utility industry. However, for strategic business decisions, considerable analysis is required over the next few years to evaluate the appropriate application and value added from this emerging technology. To this end the Houston Advanced Research Center (HARC) is proposing a three-year industry-driven project that centers on the creation of ``The Center for Fuel Cell Research and Applications.`` A collaborative laboratory housed at and managed by HARC, the Center will enable a core group of six diverse participating companies--industry participants--to investigate the economic and operational feasibility of proton-exchange-membrane (PEM) fuel cells in a variety of applications (the core project). This document describes the unique benefits of a collaborative approach to PEM applied research, among them a shared laboratory concept leading to cost savings and shared risks as well as access to outstanding research talent and lab facilities. It also describes the benefits provided by implementing the project at HARC, with particular emphasis on HARC`s history of managing successful long-term research projects as well as its experience in dealing with industry consortia projects. The Center is also unique in that it will not duplicate the traditional university role of basic research or that of the fuel cell industry in developing commercial products. Instead, the Center will focus on applications, testing, and demonstration of fuel cell technology.

  7. UC Davis Fuel Cell, Hydrogen, and Hybrid Vehicle (FCH2V) GATE Center of Excellence

    Energy Technology Data Exchange (ETDEWEB)

    Erickson, Paul

    2012-05-31

    This is the final report of the UC Davis Fuel Cell, Hydrogen, and Hybrid Vehicle (FCH2V) GATE Center of Excellence which spanned from 2005-2012. The U.S. Department of Energy (DOE) established the Graduate Automotive Technology Education (GATE) Program, to provide a new generation of engineers and scientists with knowledge and skills to create advanced automotive technologies. The UC Davis Fuel Cell, Hydrogen, and Hybrid Vehicle (FCH2V) GATE Center of Excellence established in 2005 is focused on research, education, industrial collaboration and outreach within automotive technology. UC Davis has had two independent GATE centers with separate well-defined objectives and research programs from 1998. The Fuel Cell Center, administered by ITS-Davis, has focused on fuel cell technology. The Hybrid-Electric Vehicle Design Center (HEV Center), administered by the Department of Mechanical and Aeronautical Engineering, has focused on the development of plug-in hybrid technology using internal combustion engines. The merger of these two centers in 2005 has broadened the scope of research and lead to higher visibility of the activity. UC Davis's existing GATE centers have become the campus's research focal points on fuel cells and hybrid-electric vehicles, and the home for graduate students who are studying advanced automotive technologies. The centers have been highly successful in attracting, training, and placing top-notch students into fuel cell and hybrid programs in both industry and government.

  8. Test and Approval Center for Fuel Cell and Hydrogen Technologies: Phase I. Initiation

    DEFF Research Database (Denmark)

    already spent on these technologies also lead to commercial success. The project ‘Test and Approval Center for Fuel Cell and Hydrogen Technologies: Phase I. Initiation’ was aiming at starting with the Establishment of such a center. The following report documents the achievements within the project...... of the fluctuating wind energy. As the fuel cell and hydrogen technologies come closer to commercialization, development of testing methodology, qualified testing and demonstration become increasingly important. Danish industrial players have expressed a strong need for support in the process to push fuel cell...... and hydrogen technologies from the research and development stage into the commercial domain. A Center to support industry with test, development, analysis, approval, certification, consultation, and training in the areas of fuel cell and hydrogen technologies was needed. Denmark has demonstrated leading...

  9. FUEL SERVICES: Customer focused on Product Support during the whole Life Time

    Energy Technology Data Exchange (ETDEWEB)

    Langenberger, J.; Hummel, W.

    2015-07-01

    For more than 40 years, Fuel Services of AREVA has been delivering devices and providing on-site services primary at LWR worldwide. We support our worldwide customers in achieving safe and economic operation of the fuel assemblies (FA) and core components (CC) and have received excellent feedback from them. But the Fuel Services support goes beyond on-site activities. (Author)

  10. Design of fuel cell powered data centers for sufficient reliability and availability

    Science.gov (United States)

    Ritchie, Alexa J.; Brouwer, Jacob

    2018-04-01

    It is challenging to design a sufficiently reliable fuel cell electrical system for use in data centers, which require 99.9999% uptime. Such a system could lower emissions and increase data center efficiency, but the reliability and availability of such a system must be analyzed and understood. Currently, extensive backup equipment is used to ensure electricity availability. The proposed design alternative uses multiple fuel cell systems each supporting a small number of servers to eliminate backup power equipment provided the fuel cell design has sufficient reliability and availability. Potential system designs are explored for the entire data center and for individual fuel cells. Reliability block diagram analysis of the fuel cell systems was accomplished to understand the reliability of the systems without repair or redundant technologies. From this analysis, it was apparent that redundant components would be necessary. A program was written in MATLAB to show that the desired system reliability could be achieved by a combination of parallel components, regardless of the number of additional components needed. Having shown that the desired reliability was achievable through some combination of components, a dynamic programming analysis was undertaken to assess the ideal allocation of parallel components.

  11. Preliminary estimates of the charge for spent-fuel storage and disposal services

    International Nuclear Information System (INIS)

    1978-07-01

    The purpose of this report is to stimulate discussion among a wide range of interested parties concerning a one-time charge by the U.S. Government for disposal, or interim storage and disposal, of spent unreprocessed nuclear fuel. The report contains a set of estimates of the charge based on current cost figures and a variety of demand, logistical, institutional, and cost overrun assumptions. The services are to be offered to domestic utilities by the U.S. Government in connection with the spent fuel policy approved by the President and announced by the Department of Energy (DOE) on October 18, 1977. This policy is a direct result of the indefinite deferral of all commercial reprocessing of spent fuel announced by President Carter on April 7, 1977. The services will also be offered to foreign governments on a limited basis in cases where this action would contribute to U.S. goals for nonproliferation of nuclear weapons. The report does not establish new policy and it does not commit DOE to any specific program, schedule or charge. No scenario or case is to be considered most important, no methodology is to be considered definitive, and no charge is to be considered most likely or to represent a proposed charge. The report describes basic principles and methodologies for calculating the charge and highlights primary cost centers. Current estimates of program and facility costs are used. Various aspects of the DOE Spent Fuel Storage Program are brought into focus through this analysis. Interested parties should find these assessment criteria helpful for their planning and useful in discussions concerning the program

  12. Health Services Cost Analyzing in Tabriz Health Centers 2008

    Directory of Open Access Journals (Sweden)

    Massumeh gholizadeh

    2015-08-01

    Full Text Available Background and objectives : Health Services cost analyzing is an important management tool for evidence-based decision making in health system. This study was conducted with the purpose of cost analyzing and identifying the proportion of different factors on total cost of health services that are provided in urban health centers in Tabriz. Material and Methods : This study was a descriptive and analytic study. Activity Based Costing method (ABC was used for cost analyzing. This cross–sectional survey analyzed and identified the proportion of different factors on total cost of health services that are provided in Tabriz urban health centers. The statistical population of this study was comprised of urban community health centers in Tabriz. In this study, a multi-stage sampling method was used to collect data. Excel software was used for data analyzing. The results were described with tables and graphs. Results : The study results showed the portion of different factors in various health services. Human factors by 58%, physical space 8%, medical equipment 1.3% were allocated with high portion of expenditures and costs of health services in Tabriz urban health centers. Conclusion : Based on study results, since the human factors included the highest portion of health services costs and expenditures in Tabriz urban health centers, balancing workload with staff number, institutionalizing performance-based management and using multidisciplinary staffs may lead to reduced costs of services. ​

  13. Fuel Services

    International Nuclear Information System (INIS)

    Silberstein, A.

    1982-09-01

    FRAGEMA has developed most types of inspection equipments to work on irradiated fuel assemblies and on single fuel rods during reactor outages with an efficiency compatible with the utilities operating priorities. In order to illustrate this statement, two specific examples of inspection equipments are shortly described: the on-site removable fuel rod assembly examination stand, and the fuel assembly multiple examination device. FRAGEMA has developed techniques for the identifiction of the leaking fuel rods in the fuel assembly and the tooling necessary to perform the replacement of the faulted element. These examples of methods, techniques and equipments described and the experience accumulated through their use allow FRAGEMA to qualify for offering the supply of the corresponding software, hardware or both whenever an accurate understanding of the fuel behaviour is necessary and whenever direct intervention on the assembly and associated components is necessary due to safety, operating or economical reasons

  14. Health services at the Kennedy Space Center

    Science.gov (United States)

    Ferguson, E. B.; Humbert, P.; Long, I. D.; Tipton, D. A.

    1992-01-01

    Comprehensive occupational health services are provided to approximately 17,000 workers at the Kennedy Space Center and an additional 6000 on Cape Canaveral Air Force Station. These areas cover about 120,000 acres encompassing part of the Merritt Island Wild Life Refuge and wetlands which are the habitat of numerous endangered and protected species of wildlife. The services provided at the Kennedy Space Center optimally assure a safe and healthy working environment for the employees engaged in the preparation and launching of this country's Space Shuttle and other important space exploration programs.

  15. NNDC [National Nuclear Data Center] on-line services documentation

    International Nuclear Information System (INIS)

    Dunford, C.L.; Burrows, T.W.; Tuli, J.K.

    1987-01-01

    This document summarizes and describes how to access the on-line services available from the National Nuclear Data Center (NNDC) located at Brookhaven National Laboratory. The services are available free of cost to US Department of Energy, its contractors and others who support the NNDC or supply data to the NNDC. Four of the center's data bases are now accessible to non-NNDC scientists via remote connection to the center's VAX 11/780. To use this service, you must have a terminal with access by either a telephone line or the PHYSNET network. A VT100 terminal or a terminal with VT-100 emulation is recommended but not required

  16. Center for Surveillance, Epidemiology and Laboratory Services (CSELS)

    Data.gov (United States)

    Federal Laboratory Consortium — The mission of the Center for Surveillance, Epidemiology and Laboratory Services (CSELS) is to provide scientific service, expertise, skills, and tools in support of...

  17. 78 FR 45543 - Center for Mental Health Services; Notice of Meeting

    Science.gov (United States)

    2013-07-29

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Substance Abuse and Mental Health Services Administration Center for Mental Health Services; Notice of Meeting Pursuant to Public Law 92-463, notice is hereby given that the Substance Abuse and Mental Health Services Administration's (SAMHSA) Center for Mental...

  18. Closed-Cycle Hydrogen-Oxygen Regenerative Fuel Cell at the NASA Glenn Research Center-An Update

    Science.gov (United States)

    Bents, David J.; Chang, Bei-Jiann; Johnson, Donald W.; Garcia, Christopher P.

    2008-01-01

    The closed cycle hydrogen-oxygen proton exchange membrane (PEM) regenerative fuel cell (RFC) at the NASA Glenn Research Center has demonstrated multiple back-to-back contiguous cycles at rated power and round-trip efficiencies up to 52 percent. It is the first fully closed cycle RFC ever demonstrated. (The entire system is sealed; nothing enters or escapes the system other than electrical power and heat.) During fiscal year fiscal year (FY) FY06 to FY07, the system s numerous modifications and internal improvements focused on reducing parasitic power, heat loss, and noise signature; increasing its functionality as an unattended automated energy storage device; and in-service reliability.

  19. Tri-Service Center for Oral Health Studies (TSCOHS)

    Data.gov (United States)

    Federal Laboratory Consortium — The Tri-Service Center for Oral Health Studies (TSCOHS), a service of the Postgraduate Dental College, is chartered by the Department of Defense TRICARE Management...

  20. Clean Energy Solutions Center Services (Portuguese Translation)

    Energy Technology Data Exchange (ETDEWEB)

    2016-03-01

    This is a Portuguese translation of the Clean Energy Solutions Center Services fact sheet. The Solutions Center offers no-cost expert policy assistance, webinars and training forums, clean energy policy reports, data, and tools provided in partnership with more than 35 leading international and regional clean energy organizations.

  1. Need for Asian regional spent fuel recycle center (ARRC)

    International Nuclear Information System (INIS)

    Yamamura, Osamu

    2009-01-01

    Energy demand is increasing rapidly in the Asia-Pacific region. From the viewpoint of preventing global warming, countries in the region are expected to introduce more nuclear power plants (NPPs) which do not emit greenhouse gases (GHGs). At the end of this century, the capacity for NPPs is estimated to reach around 1600 GWe and around 300,000 tons of uranium (TU) as spent fuel will be accumulated. The spent fuel from the NPPs should be reprocessed and fabricated into MOX fuel to decrease the amounts of radioactive wastes and future fuel recycling should be supported in the Asian Regional Spent Fuel Recycle Center (ARRC) under international regulation. The ARRC will include a reprocessing plant, an MOX fuel fabrication plant, a high-activity vitrified solid waste storage facility, and sea discharge pipes for extremely low activity liquid wastes etc. Furthermore, the ARRC should be operated as a component in an international organization scheme, an ASIATOM and it should accept the full scope of IAEA safeguards to verify the nonproliferation of nuclear materials. When the ARRC is designed, knowledge obtained through experiences in the Tokai and the Rokkasho reprocessing plants in Japan, which is a non-nuclear weapons country, will be used. (author)

  2. Risk hedging against the fuel price fluctuation in energy service business

    International Nuclear Information System (INIS)

    Bannai, Masaaki; Tomita, Yasushi; Ishida, Yasushi; Miyazaki, Takahiko; Akisawa, Atsushi; Kashiwagi, Takao

    2007-01-01

    Energy service business, or energy service company (ESCO), is expanding among industrial users as a means of energy saving. The ESCO business normally tends to become a long-term operation. During the operation, fluctuations of fuel and electricity costs significantly impact on the stability of the profit from ESCO business. Therefore, it is essential to reduce the risk of fuel and electricity cost fluctuations. Generally, a transaction called ''financial derivative'' is used as a measure of hedging against the fuel price fluctuation. In the case of ESCO business, it is necessary to manage the risk of both electricity and fuel price fluctuations because the variation in electricity price strongly affects the profit from ESCO as that in fuel price does. In this paper, the stabilization of the ESCO profit using financial derivatives was discussed by quantitative analyses of the actual data from existing plants. Case studies revealed that the appropriate volume of the fuel derivative implementation was less than a half of the fuel consumption at the ESCO facilities, and it ranged from 5% to 50%. (author)

  3. Cost of the external MTR-fuel cycle. (Uranium , reprocessing and related services)

    International Nuclear Information System (INIS)

    Mueller, H.; Gruber, G.

    1991-01-01

    This paper points out how the RERTR program has affected NUKEM's fuel supplies for MTRs and how the prices in the External MTR Fuel Cycle have developed during this period. In addition other potential fuel sources and services on the External MTR Fuel Cycle are given. (orig.)

  4. Western New York Nuclear Service Center study. Companion report

    International Nuclear Information System (INIS)

    1978-01-01

    A one-year study of the Western new York Nuclear Service Center was conducted, including consideration of the following options: (1) Federal technical and financial aid in support of decommissioning high-level waste disposal operations; (2) Federal operation for the purpose of decommissioning existing facilities and disposing of existing high-level wastes, including a demonstration program for the solidification of high-level wastes for permanent burial; (3) permanent Federal ownership of and responsibility for all or part of the Western new York Nuclear Service Center, and Federal receipt of the license from the present co-licensees; and (4) use of the Western New York Nuclear Service Center for other purposes. Environmental impacts and institutional aspects are also covered

  5. Fuel Cell Backup Power System for Grid Service and Micro-Grid in Telecommunication Applications: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Zhiwen [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Eichman, Joshua D [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Kurtz, Jennifer M [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2018-03-22

    This paper presents the feasibility and economics of using fuel cell backup power systems in telecommunication cell towers to provide grid services (e.g., ancillary services, demand response). The fuel cells are able to provide power for the cell tower during emergency conditions. This study evaluates the strategic integration of clean, efficient, and reliable fuel cell systems with the grid for improved economic benefits. The backup systems have potential as enhanced capability through information exchanges with the power grid to add value as grid services that depend on location and time. The economic analysis has been focused on the potential revenue for distributed telecommunications fuel cell backup units to provide value-added power supply. This paper shows case studies on current fuel cell backup power locations and regional grid service programs. The grid service benefits and system configurations for different operation modes provide opportunities for expanding backup fuel cell applications responsive to grid needs.

  6. Alternative Fuels Data Center: Mesa Unified School District Reaps Economic

    Science.gov (United States)

    and Environmental Benefits with Propane Buses Mesa Unified School District Reaps Economic and School District Reaps Economic and Environmental Benefits with Propane Buses on Facebook Tweet about Alternative Fuels Data Center: Mesa Unified School District Reaps Economic and Environmental Benefits with

  7. Internationally Safeguarded Atomic Fuel Exchange Center for the Asian Pacific Basin

    International Nuclear Information System (INIS)

    Selvaduray, G.; Anderson, R.N.; Goldstein, M.K.

    1979-01-01

    The concept of an Internationally Safeguarded Atomic Fuel Exchange Center (ISAFE) for the Asia-Pacific Basin is examined. The geography and nuclear capabilitiy of the countries that comprise the Asia-Pacific Basin is described in full length. The incentives and the limitations for the establishment of the ISAFE center in the Asia-Pacific Basin are discussed in detail. 34 refs

  8. International cooperation in supply of nuclear fuel and fuel cycle services

    International Nuclear Information System (INIS)

    Sievering, N.F. Jr.

    1977-01-01

    In the face of costlier, decreasingly available oil and a desire to achieve a higher degree of self-sufficiency, nuclear power has become an increasingly important ingredient in the mix of energy options looked to by a growing number of industrialized and developing states. One of the central concerns of states that are placing greater reliance on nuclear energy is the assurance that adequate nuclear fuels will be available on a timely basis and on economically acceptable terms. Greater emphasis on nuclear energy and on self-sufficiency entails greater potential risks as sensitive facilities and technologies associated with the nuclear fuel cycle threaten to proliferate. This paper explores the juxtaposition of the spread of nuclear technology and facilities in support of legitimate desires to achieve greater energy self-sufficiency and economic and social progress, on the one hand, and the implications of widely disseminated nuclear fuel cycle capacity for the objective of non-proliferation, on the other hand. It examines the recent evolution of nuclear fuel cycle activities including the scope of cooperation both among nuclear supplier states and between supplier and non-supplier states; explores the arenas in which common efforts are, can and should be undertaken (e.g., in terms of the nuclear resource base, the provision of essential services such as enrichment, and the management of nuclear waste), and identifies means by which national aspirations and international security concerns can be effectively accommodated. Particular attention is given to the methods by which the dissemination of sensitive technologies at facilities can be controlled without sacrificing the legitimate interests of any state, as well as to methods by which controls over potentially dangerous materials such as plutonium can be strengthened. The paper concludes that there are significant opportunities to achieve a high degree of international cooperation in the arena of fuel cycle

  9. 77 FR 50519 - Center for Mental Health Services (CMHS); Amendment of Meeting

    Science.gov (United States)

    2012-08-21

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Substance Abuse and Mental Health Services Administration Center for Mental Health Services (CMHS); Amendment of Meeting Pursuant to Public Law 92-463, notice is... Substance Abuse and Mental Health Services Administration's (SAMHSA), Center for Mental Health Services...

  10. Alternative Fuels Data Center: Biodiesel Fueling Stations

    Science.gov (United States)

    Locations Infrastructure Development Vehicles Laws & Incentives Biodiesel Fueling Stations Photo of a location or along a route. Infrastructure Development Learn about biodiesel fueling infrastructure codes Case Studies California Ramps Up Biofuels Infrastructure Green Fueling Station Powers Fleets in Upstate

  11. Alternative Fuels Data Center: Ethanol Fueling Stations

    Science.gov (United States)

    ... More in this section... Ethanol Basics Benefits & Considerations Stations Locations Infrastructure fueling stations by location or along a route. Infrastructure Development Learn about ethanol fueling infrastructure; codes, standards, and safety; and ethanol equipment options. Maps & Data E85 Fueling Station

  12. Available reprocessing and recycling services for research reactor spent nuclear fuel

    Energy Technology Data Exchange (ETDEWEB)

    Tozser, Sandor Miklos; Adelfang, Pablo; Bradley, Ed [International Atomic Energy Agency, Vienna (Austria); Budu, Madalina [SOSNY Research and Development Company, Moscow (Russian Federation); Chiguer, Mustapha [AREVA, Paris (France)

    2015-05-15

    International activities in the back-end of the research reactor (RR) fuel cycle have so far been dominated by the programmes of acceptance of highly-enriched uranium (HEU) spent nuclear fuel (SNF) by the country where it was originally enriched. These programmes will soon have achieved their goals and the SNF take-back programmes will cease. However, the needs of the nuclear community dictate that the majority of the research reactors continue to operate using low enriched uranium (LEU) fuel in order to meet the varied mission objectives. As a result, inventories of LEU SNF will continue to be created and the back-end solution of RR SNF remains a critical issue. In view of this fact, the IAEA, based on the experience gained during the decade of international cooperation in supporting the objectives of the HEU take-back programmes, will draw up a report presenting available reprocessing and recycling services for research reactor spent nuclear fuel. This paper gives an overview of the guiding document which will address all aspects of Reprocessing and Recycling Services for RR SNF, including an overview of solutions, decision making support, service suppliers, conditions (prerequisites, options, etc.), services offered by the managerial and logistics support providers with a focus on available transport packages and applicable transport modes.

  13. Modern Data Center Services Supporting Science

    Science.gov (United States)

    Varner, J. D.; Cartwright, J.; McLean, S. J.; Boucher, J.; Neufeld, D.; LaRocque, J.; Fischman, D.; McQuinn, E.; Fugett, C.

    2011-12-01

    The National Oceanic and Atmospheric Administration's National Geophysical Data Center (NGDC) World Data Center for Geophysics and Marine Geology provides scientific stewardship, products and services for geophysical data, including bathymetry, gravity, magnetics, seismic reflection, data derived from sediment and rock samples, as well as historical natural hazards data (tsunamis, earthquakes, and volcanoes). Although NGDC has long made many of its datasets available through map and other web services, it has now developed a second generation of services to improve the discovery and access to data. These new services use off-the-shelf commercial and open source software, and take advantage of modern JavaScript and web application frameworks. Services are accessible using both RESTful and SOAP queries as well as Open Geospatial Consortium (OGC) standard protocols such as WMS, WFS, WCS, and KML. These new map services (implemented using ESRI ArcGIS Server) are finer-grained than their predecessors, feature improved cartography, and offer dramatic speed improvements through the use of map caches. Using standards-based interfaces allows customers to incorporate the services without having to coordinate with the provider. Providing fine-grained services increases flexibility for customers building custom applications. The Integrated Ocean and Coastal Mapping program and Coastal and Marine Spatial Planning program are two examples of national initiatives that require common data inventories from multiple sources and benefit from these modern data services. NGDC is also consuming its own services, providing a set of new browser-based mapping applications which allow the user to quickly visualize and search for data. One example is a new interactive mapping application to search and display information about historical natural hazards. NGDC continues to increase the amount of its data holdings that are accessible and is augmenting the capabilities with modern web

  14. [Development and application of hospital customer service center platform].

    Science.gov (United States)

    Chen, Minya; Zheng, Konglin; Xia, Yong

    2012-01-01

    This paper introduces the construction and application of the platform of client service center in the general hospital and discusses how to provide patients with an entire service including service before clinic, on clinic and after clinic. It can also provide references for a new service mode for clinic service.

  15. Modeling Road Traffic Using Service Center

    Directory of Open Access Journals (Sweden)

    HARAGOS, I.-M.

    2012-05-01

    Full Text Available Transport systems have an essential role in modern society because they facilitate access to natural resources and they stimulate trade. Current studies aimed at improving transport networks by developing new methods for optimization. Because of the increase in the global number of cars, one of the most common problems facing the transport network is congestion. By creating traffic models and simulate them, we can avoid this problem and find appropriate solutions. In this paper we propose a new method for modeling traffic. This method considers road intersections as being service centers. A service center represents a set consisting of a queue followed by one or multiple servers. This model was used to simulate real situations in an urban traffic area. Based on this simulation, we have successfully determined the optimal functioning and we have computed the performance measures.

  16. Alternative Fuels Data Center: Federal Laws and Incentives for Biodiesel

    Science.gov (United States)

    SmartWay Transport Partnership is a market-based public-private collaboration between the U.S operate vehicle fleets, the public, and other interested entities about the benefits of biodiesel use Biodiesel Printable Version Share this resource Send a link to Alternative Fuels Data Center

  17. 77 FR 59994 - Nuclear Fuel Services, Inc., Erwin, TN; Issuance of License Renewal

    Science.gov (United States)

    2012-10-01

    ... Environmental Assessment). If you do not have access to ADAMS or if there are problems in accessing the... NUCLEAR REGULATORY COMMISSION [Docket No. 70-143; NRC-2009-0435] Nuclear Fuel Services, Inc... No. SNM-124, to Nuclear Fuel Services, Inc. (the licensee), which authorizes the licensee to continue...

  18. Clean Energy Solutions Center Services (Arabic Translation) (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2014-06-01

    This is the Arabic translation of the Clean Energy Solutions Center Services fact sheet. The Clean Energy Solutions Center (Solutions Center) helps governments, advisors and analysts create policies and programs that advance the deployment of clean energy technologies. The Solutions Center partners with international organizations to provide online training, expert assistance, and technical resources on clean energy policy.

  19. 47 CFR 25.284 - Emergency Call Center Service.

    Science.gov (United States)

    2010-10-01

    ... mobile satellite service to end-user customers (part 25, subparts A-D) must provide Emergency Call Center... Center personnel must determine the emergency caller's phone number and location and then transfer or otherwise redirect the call to an appropriate public safety answering point. Providers of mobile satellite...

  20. Fuel-cycle facilities: preliminary safety and environmental information document. Volume VII

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    Information is presented concerning the mining and milling of uranium and thorium; uranium hexafluoride conversion; enrichment; fuel fabrication; reprocessing; storage options; waste disposal options; transportation; heavy-water-production facilities; and international fuel service centers.

  1. Fuel-cycle facilities: preliminary safety and environmental information document. Volume VII

    International Nuclear Information System (INIS)

    1980-01-01

    Information is presented concerning the mining and milling of uranium and thorium; uranium hexafluoride conversion; enrichment; fuel fabrication; reprocessing; storage options; waste disposal options; transportation; heavy-water-production facilities; and international fuel service centers

  2. AN ANALYTICAL FRAMEWORK FOR ASSESSING RELIABLE NUCLEAR FUEL SERVICE APPROACHES: ECONOMIC AND NON-PROLIFERATION MERITS OF NUCLEAR FUEL LEASING

    International Nuclear Information System (INIS)

    Kreyling, Sean J.; Brothers, Alan J.; Short, Steven M.; Phillips, Jon R.; Weimar, Mark R.

    2010-01-01

    The goal of international nuclear policy since the dawn of nuclear power has been the peaceful expansion of nuclear energy while controlling the spread of enrichment and reprocessing technology. Numerous initiatives undertaken in the intervening decades to develop international agreements on providing nuclear fuel supply assurances, or reliable nuclear fuel services (RNFS) attempted to control the spread of sensitive nuclear materials and technology. In order to inform the international debate and the development of government policy, PNNL has been developing an analytical framework to holistically evaluate the economics and non-proliferation merits of alternative approaches to managing the nuclear fuel cycle (i.e., cradle-to-grave). This paper provides an overview of the analytical framework and discusses preliminary results of an economic assessment of one RNFS approach: full-service nuclear fuel leasing. The specific focus of this paper is the metrics under development to systematically evaluate the non-proliferation merits of fuel-cycle management alternatives. Also discussed is the utility of an integrated assessment of the economics and non-proliferation merits of nuclear fuel leasing.

  3. Nuclear Fuel Recovery and Recycling Center. License application, PSAR, volume 3

    International Nuclear Information System (INIS)

    1976-01-01

    Volume 3 comprises Chapter 5 which provides descriptive information on Nuclear Fuel Recovery and Recycling Center buildings and other facilities, including their locations. The design features discussed include those used to withstand environmental and accidental forces and to insure radiological protection

  4. The effects of off-center pellets on the temperature distribution and the heat flux distribution of fuel rods in nuclear reactors

    International Nuclear Information System (INIS)

    Peng Muzhang; Xing Jianhua

    1986-01-01

    This paper analyzes the effects of off-center pellets on the steady state temperature distribution and heat flux distribution of fuel rods in the nuclear reactors, and derives the dimensionless temperature distribution relationships and the dimensionless heat flux distribution relationship from the fuel rods with off-center pellets. The calculated results show that the effects of off-center will result in not only deviations of the highest temperature placement in the fuel pellets, but also the circumferentially nonuniform distributions of the temperatures and heat fluxes of the fuel rod surfaces

  5. Hospital image and the positioning of service centers: an application in market analysis and strategy development.

    Science.gov (United States)

    Smith, S M; Clark, M

    1990-09-01

    The research confirms the coexistence of different images for hospitals, service centers within the same hospitals, and service programs offered by each of the service centers. The images of individual service centers are found not to be tied to the image of the host facility. Further, service centers and host facilities have differential rankings on the same service decision attributes. Managerial recommendations are offered for "image differentiation" between a hospital and its care centers.

  6. Contents operation center for 'mopera' information service; Mopera joho service muke contents un'ei center

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    'Mopera' information service is a mobile information service in which NTT Mobile Communications Network, Inc. offers information of various fields such as business and hobbies for the users of the portable telephone or PHS of the company. Toshiba Corp. started the contents operation center consistently performing from the preparation of contents to the management of a server for the above information service, making efforts in expanding the contents since the beginning of the service in the fall of 1998, and operating at present more than ten kinds of contents such as news, weather forecast, and stock information other than mobile 'Ekimae-Tanken Club' (adventure club in front of a station). Moreover, Toshiba takes it into consideration to build a system aiming at a stable operation like a duplex operation of a server, 24-hour automatic surveillance, etc., continuously providing highly reliable services. (translated by NEDO)

  7. Engine Tune-Up Service. Unit 5: Fuel and Carburetion Systems. Posttests. Automotive Mechanics Curriculum.

    Science.gov (United States)

    Morse, David T.

    This book of posttests is designed to accompany the Engine Tune-Up Service Student Guide for Unit 5, Fuel and Carburetion Systems; available separately as CE 031 217. Focus of the posttests is the inspecting and servicing of the fuel and carburetion systems. One multiple choice posttest is provided that covers the 10 performance objectives…

  8. Annual report and accounts 1980/81. [UK; Solid Fuels Avisory Service; book

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    The work of the Solid Fuel Advisory Service during 1980/81 is described under the headings: sales promotion, market research, service to the public, technical, chimneys and training. The accounts are then presented.

  9. Nuclear Fuel Recovery and Recycling Center. License application, PSAR, volume 1

    International Nuclear Information System (INIS)

    1976-01-01

    A summary of the location and major design features of the proposed Nuclear Fuel Recovery and Recycling Center is presented. The safety aspects of the proposed facilities and operations are summarized, taking into account possible normal and abnormal operating and environmental conditions. A chapter on site characteristics is included

  10. Status report: conceptual fuel cycle studies for the Hanford Nuclear Energy Center

    International Nuclear Information System (INIS)

    Merrill, E.T.; Fleischman, R.M.

    1975-07-01

    A summary is presented of the current status of studies to determine the logistics of onsite plutonium recycle and the timing involved in introducing the associated reprocessing and fabrication fuel cycle facilities at the Hanford Nuclear Energy Center

  11. Arizona Public Service - Alternative Fuel (Hydrogen) Pilot Plant Design Report

    Energy Technology Data Exchange (ETDEWEB)

    James E. Francfort

    2003-12-01

    Hydrogen has promise to be the fuel of the future. Its use as a chemical reagent and as a rocket propellant has grown to over eight million metric tons per year in the United States. Although use of hydrogen is abundant, it has not been used extensively as a transportation fuel. To assess the viability of hydrogen as a transportation fuel and the viability of producing hydrogen using off-peak electric energy, Pinnacle West Capital Corporation (PNW) and its electric utility subsidiary, Arizona Public Service (APS) designed, constructed, and operates a hydrogen and compressed natural gas fueling station—the APS Alternative Fuel Pilot Plant. This report summarizes the design of the APS Alternative Fuel Pilot Plant and presents lessons learned from its design and construction. Electric Transportation Applications prepared this report under contract to the U.S. Department of Energy’s Advanced Vehicle Testing Activity. The Idaho National Engineering and Environmental Laboratory manages these activities for the Advanced Vehicle Testing Activity.

  12. Historical Perspective of Clean Cities and Alternative Fuels Data Center Trends

    Energy Technology Data Exchange (ETDEWEB)

    O' Connor, J. K.

    2007-09-01

    This document draws on the wealth of information housed in the U.S. Department of Energy's Alternative Fuels Data Center at the National Renewable Energy Laboratory. Trends and analyses are examined from data as far back as 1991. The findings of those trends and salient features are summarized.

  13. 75 FR 45600 - Information Collection; Customer Data Worksheet Request for Service Center Information Management...

    Science.gov (United States)

    2010-08-03

    ... DEPARTMENT OF AGRICULTURE Farm Service Agency Information Collection; Customer Data Worksheet Request for Service Center Information Management System (SCIMS) Record Changes AGENCY: Farm Service... Customer Data Worksheet Request for Service Center Information Management System (SCIMS) that contains the...

  14. Nuclear reactors and fuel cycle

    International Nuclear Information System (INIS)

    2014-01-01

    The Nuclear Fuel Center (CCN) of IPEN produces nuclear fuel for the continuous operation of the IEA-R1 research reactor of IPEN. The serial production started in 1988, when the first nuclear fuel element was delivered for IEA-R1. In 2011, CCN proudly presents the 100 th nuclear fuel element produced. Besides routine production, development of new technologies is also a permanent concern at CCN. In 2005, U 3 O 8 were replaced by U 3 Si 2 -based fuels, and the research of U Mo is currently under investigation. Additionally, the Brazilian Multipurpose Research Reactor (RMB), whose project will rely on the CCN for supplying fuel and uranium targets. Evolving from an annual production from 10 to 70 nuclear fuel elements, plus a thousand uranium targets, is a huge and challenging task. To accomplish it, a new and modern Nuclear Fuel Factory is being concluded, and it will provide not only structure for scaling up, but also a safer and greener production. The Nuclear Engineering Center has shown, along several years, expertise in the field of nuclear, energy systems and correlated areas. Due to the experience obtained during decades in research and technological development at Brazilian Nuclear Program, personnel has been trained and started to actively participate in design of the main system that will compose the Brazilian Multipurpose Reactor (RMB) which will make Brazil self-sufficient in production of radiopharmaceuticals. The institution has participated in the monitoring and technical support concerning the safety, licensing and modernization of the research reactors IPEN/MB-01 and IEA-R1. Along the last two decades, numerous specialized services of engineering for the Brazilian nuclear power plants Angra 1 and Angra 2 have been carried out. The contribution in service, research, training, and teaching in addition to the development of many related technologies applied to nuclear engineering and correlated areas enable the institution to fulfill its mission that is

  15. Nuclear reactors and fuel cycle

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-07-01

    The Nuclear Fuel Center (CCN) of IPEN produces nuclear fuel for the continuous operation of the IEA-R1 research reactor of IPEN. The serial production started in 1988, when the first nuclear fuel element was delivered for IEA-R1. In 2011, CCN proudly presents the 100{sup th} nuclear fuel element produced. Besides routine production, development of new technologies is also a permanent concern at CCN. In 2005, U{sub 3}O{sub 8} were replaced by U{sub 3}Si{sub 2}-based fuels, and the research of U Mo is currently under investigation. Additionally, the Brazilian Multipurpose Research Reactor (RMB), whose project will rely on the CCN for supplying fuel and uranium targets. Evolving from an annual production from 10 to 70 nuclear fuel elements, plus a thousand uranium targets, is a huge and challenging task. To accomplish it, a new and modern Nuclear Fuel Factory is being concluded, and it will provide not only structure for scaling up, but also a safer and greener production. The Nuclear Engineering Center has shown, along several years, expertise in the field of nuclear, energy systems and correlated areas. Due to the experience obtained during decades in research and technological development at Brazilian Nuclear Program, personnel has been trained and started to actively participate in design of the main system that will compose the Brazilian Multipurpose Reactor (RMB) which will make Brazil self-sufficient in production of radiopharmaceuticals. The institution has participated in the monitoring and technical support concerning the safety, licensing and modernization of the research reactors IPEN/MB-01 and IEA-R1. Along the last two decades, numerous specialized services of engineering for the Brazilian nuclear power plants Angra 1 and Angra 2 have been carried out. The contribution in service, research, training, and teaching in addition to the development of many related technologies applied to nuclear engineering and correlated areas enable the institution to

  16. International trade in nuclear fuel cycle services

    International Nuclear Information System (INIS)

    May, D.

    1989-01-01

    This paper analyses and discusses general trends in international trade in nuclear fuel cycle services with particular emphasis on the development of trading patterns between Europe, North America and the Far East. The paper also examines the role of collaborative ventures in the development of the nuclear industry. Barriers to international trade, the effect of government regulations and restrictions and the impact of non-proliferation issues are discussed. (author)

  17. International co-operation in the supply of nuclear fuel and fuel cycle services

    International Nuclear Information System (INIS)

    Sievering, N.F. Jr.

    1977-01-01

    Recent changes in the United States' nuclear policy, in recognition of the increased proliferation risk, have raised questions of US intentions in international nuclear fuel and fuel-cycle service co-operation. This paper details those intentions in relation to the key elements of the new policy. In the past, the USA has been a world leader in peaceful nuclear co-operation with other nations and, mindful of the relationships between civilian nuclear technology and nuclear weapon proliferation, remains strongly committed to the Non-Proliferation Treaty, IAEA safeguards and other elements concerned with international nuclear affairs. Now, in implementing President Carter's nuclear initiatives, the USA will continue its leading role in nuclear fuel and fuel-cycle co-operation in two ways, (1) by increasing its enrichment capacity for providing international LWR fuel supplies and (2) by taking the lead in solving the problems of near and long-term spent fuel storage and disposal. Beyond these specific steps, the USA feels that the international community's past efforts in controlling the proliferation risks of nuclear power are necessary but inadequate for the future. Accordingly, the USA urges other similarly concerned nations to pause with present developments and to join in a programme of international co-operation and participation in a re-assessment of future plans which would include: (1) Mutual assessments of fuel cycles alternative to the current uranium/plutonium cycle for LWRs and breeders, seeking to lessen proliferation risks; (2) co-operative mechanisms for ensuring the ''front-end'' fuel supply including uranium resource exploration, adequate enrichment capacity, and institutional arrangements; (3) means of dealing with short-, medium- and long-term spent fuel storage needs by means of technical co-operation and assistance and possibly establishment of international storage or repository facilities; and (4) for reprocessing plants, and related fuel

  18. Development of vibropac MOX fuel pins serviceable up TP superhigh burnups

    International Nuclear Information System (INIS)

    Mayorshin, A.A.; Gadzhiev, G.I.; Kisly, V.A.; Skiba, O.V.; Tzykanov, V.A.

    1998-01-01

    The main results on investigations of fast reactor fuel pins with (UPu)O 2 vibropac fuel to substantiate their serviceability up to the super-high burnups are presented. The BOR-60 reactor fuel pins radiation behaviour in stationary, transient and designed emergency conditions has been determined from the fuel pins dimensional stability analysis having regard to the results of investigation fuel and cladding swelling as well as estimations of fuel and cladding thermal-mechanical and physico-chemical interactions. It is shown that the change of the outer diameter is minimum in fuel pins with VMOX fuel with a getter-metallic uranium powder and ferrito-martensite steel cladding, and the corrosion damage of the cladding inner surface is absent up to 26% h.a. The experiments with over-heating of the irradiated fuel pins cladding up to 850 deg. C did not lead to any changes in pins integrity. The availability of the periphery area of the vibropac fuel cure initial structure provides the minimum level of the thermal-mechanical stress at transient conditions of reactor operation. (author)

  19. Development of thermocouple re-instrumentation technique for irradiated fuel rod. Techniques for making center hole into UO2 pellets and thermocouple re-instrumentation to fuel rod

    International Nuclear Information System (INIS)

    Shimizu, Michio; Saito, Junichi; Oshima, Kunio

    1995-07-01

    The information on FP gas pressure and centerline temperature of fuel pellets during power transient is important to study the pellet clad interaction (PCI) mechanism of high burnup LWR fuel rods. At the Department of JMTR, a re-instrumentation technique of FP gas pressure gage for an irradiated fuel rod was developed in 1990. Furthermore, a thermocouple re-instrumentation technique was successfully developed in 1994. Two steps were taken to carry out the development program of the thermocouple re-instrumentation technique. In the first step, a drilling technique was developed for making a center hole of the irradiated fuel pellets. Various drilling tests were carried out using dummy of fuel rods consisted of Ba 2 FeO 3 pellets and Zry-2 cladding. On this work it is important to keep the pellets just the state cracked at a power reactor. In these tests, the technique to fix the pellets by frozen CO 2 was used during the drilling work. Also, diamond drills were used to make the center hole. These tests were completed successfully. A center hole, 54mm depth and 2.5mm diameter, was realized by these methods. The second step of this program is the in-pile demonstration test on an irradiated fuel rod instrumented dually a thermocouple and FP gas pressure gage. The demonstration test was carried out at the JMTR in 1995. (author)

  20. A Variable Service Broker Routing Policy for data center selection in cloud analyst

    Directory of Open Access Journals (Sweden)

    Ahmad M. Manasrah

    2017-07-01

    Full Text Available Cloud computing depends on sharing distributed computing resources to handle different services such as servers, storage and applications. The applications and infrastructures are provided as pay per use services through data center to the end user. The data centers are located at different geographic locations. However, these data centers can get overloaded with the increase number of client applications being serviced at the same time and location; this will degrade the overall QoS of the distributed services. Since different user applications may require different configuration and requirements, measuring the user applications performance of various resources is challenging. The service provider cannot make decisions for the right level of resources. Therefore, we propose a Variable Service Broker Routing Policy – VSBRP, which is a heuristic-based technique that aims to achieve minimum response time through considering the communication channel bandwidth, latency and the size of the job. The proposed service broker policy will also reduce the overloading of the data centers by redirecting the user requests to the next data center that yields better response and processing time. The simulation shows promising results in terms of response and processing time compared to other known broker policies from the literature.

  1. Evaluation of poison information services provided by a new poison information center.

    Science.gov (United States)

    Churi, Shobha; Abraham, Lovin; Ramesh, M; Narahari, M G

    2013-01-01

    The aim of this study is to assess the nature and quality of services provided by poison information center established at a tertiary-care teaching hospital, Mysore. This was a prospective observational study. The poison information center was officially established in September 2010 and began its functioning thereafter. The center is equipped with required resources and facility (e.g., text books, Poisindex, Drugdex, toll free telephone service, internet and online services) to provide poison information services. The poison information services provided by the center were recorded in documentation forms. The documentation form consists of numerous sections to collect information on: (a) Type of population (children, adult, elderly or pregnant) (b) poisoning agents (c) route of exposure (d) type of poisoning (intentional, accidental or environmental) (e) demographic details of patient (age, gender and bodyweight) (f) enquirer details (background, place of call and mode of request) (g) category and purpose of query and (h) details of provided service (information provided, mode of provision, time taken to provide information and references consulted). The nature and quality of poison information services provided was assessed using a quality assessment checklist developed in accordance with DSE/World Health Organization guidelines. Chi-Square test (χ(2)). A total of 419 queries were received by the center. A majority (n = 333; 79.5%) of the queries were asked by the doctors to provide optimal care (n = 400; 95.5%). Most of the queries were received during ward rounds (n = 201; 48.0%), followed by direct access (n = 147; 35.1%). The poison information services were predominantly provided through verbal communication (n = 352; 84.0%). Upon receipt of queries, the required service was provided immediately (n = 103; 24.6%) or within 10-20 min (n = 296; 70.6%). The queries were mainly related to intentional poisoning (n = 258; 64.5%), followed by accidental poisoning

  2. Competitive service centers location in the cities with aim to reduce traffic (Case study: Health centers location in the city if Isfahan

    Directory of Open Access Journals (Sweden)

    Hamid Moradi

    2011-03-01

    Full Text Available Abstract   Distribution of goods and services in cities is of utmost importance. Selecting appropriate venues for different service centers in a city not only enables the citizens to access these services much more easily, but also reduces the traffic load caused by trips made to reach them. Unfortunately, the lack of a correct urban planning has led to inappropriate formation of many cities around the world in terms of the locations assumed for different service centers. Since the private sector has been given the responsibility to construct most of these centers, changing their current locations may be restricted due to legal obligations. Therefore, it seems necessary for the government to construct new service centers with high competitive facilities to attract customers and to compete with those built by the private sector. In this paper, the selection of appropriate locations to construct new service centers has been studied. Such locations have been selected in a way to fulfill goals such as rapid and easy accessibility for the customers and reduction of traffic drawbacks caused by the related trips. In this regard, a model for service centers with restricted capacity has been designed and a parallel simulated annealing algorithm has been proposed to solve it. Finally, the proposed algorithm has been utilized to locate the health centers around the city of Isfahan and its efficiency has been investigated. The findings highlight the accuracy and speed of the proposed algorithm in location of the health centers of Isfahan.

  3. Experimental support of WWER-440 fuel reliability and serviceability at high burnup

    Energy Technology Data Exchange (ETDEWEB)

    Smirnov, A; Ivanov, V; Pnyushkin, A [Nauchno-Issledovatel` skij Inst. Atomnykh Reaktorov, Dimitrovgrad (Russian Federation); Tzibulya, V [AO Mashinostroitelnij Zavod Electrostal (Russian Federation); Kolosovsky, V; Bibilashvili, Yu [Vsesoyuznyj Nauchno-Issledovatel` skij Inst. Neorganicheskikh Materialov, Moscow (Russian Federation); Dubrovin, K [Russian Research Centre Kurchatov Inst., Moscow (Russian Federation)

    1994-12-31

    Results from post-reactor examination of two WWER-440 fuel assemblies spent at the Kola NPP Unit 3 during 4 and 5 fuel cycles are presented. The fuel assembly states and their serviceability allowance are estimated experimentally at the RIAR hot laboratory and studied by non-destructive and destructive methods. The following parameters are examined: fuel assembly overall dimensions change; fuel element diameter change; fuel element cladding corrosion and hydriding; fuel element cladding mechanical properties; fission gas release from fuel and gas pressure; fuel macro- and microstructure. it has been found that the maximum fuel burnup of fuel assemblies No. 1 and No.2 achieved is 58.3 and 64.0 MWd/kg, respectively. The mechanical fuel pellets-cladding interaction has been observed at the average fuel burnup above 45 MWd/kg that occurred with increasing the local cladding diameter at the areas of pellets end arrangement (bamboo stick). The gas release linearly increases at the range 2.7% per 10 MWd/kg within burnup of 43-60 MWd/kg. 9 figs., 3 refs.

  4. Calculation of demands for nuclear fuels and fuel cycle services. Description of computer model and strategies developed by Working Group 1

    International Nuclear Information System (INIS)

    Working Group 1 examined a range of reactor deployment strategies and fuel cycle options, in oder to estimate the range of nuclear fuel requirements and fuel cycle service needs which would result. The computer model, its verification in comparison with other models, the strategies to be examined through use of the model, and the range of results obtained are described

  5. Virtualized Multi-Mission Operations Center (vMMOC) and its Cloud Services

    Science.gov (United States)

    Ido, Haisam Kassim

    2017-01-01

    His presentation will cover, the current and future, technical and organizational opportunities and challenges with virtualizing a multi-mission operations center. The full deployment of Goddard Space Flight Centers (GSFC) Virtualized Multi-Mission Operations Center (vMMOC) is nearly complete. The Space Science Mission Operations (SSMO) organizations spacecraft ACE, Fermi, LRO, MMS(4), OSIRIS-REx, SDO, SOHO, Swift, and Wind are in the process of being fully migrated to the vMMOC. The benefits of the vMMOC will be the normalization and the standardization of IT services, mission operations, maintenance, and development as well as ancillary services and policies such as collaboration tools, change management systems, and IT Security. The vMMOC will also provide operational efficiencies regarding hardware, IT domain expertise, training, maintenance and support.The presentation will also cover SSMO's secure Situational Awareness Dashboard in an integrated, fleet centric, cloud based web services fashion. Additionally the SSMO Telemetry as a Service (TaaS) will be covered, which allows authorized users and processes to access telemetry for the entire SSMO fleet, and for the entirety of each spacecrafts history. Both services leverage cloud services in a secure FISMA High and FedRamp environment, and also leverage distributed object stores in order to house and provide the telemetry. The services are also in the process of leveraging the cloud computing services elasticity and horizontal scalability. In the design phase is the Navigation as a Service (NaaS) which will provide a standardized, efficient, and normalized service for the fleet's space flight dynamics operations. Additional future services that may be considered are Ground Segment as a Service (GSaaS), Telemetry and Command as a Service (TCaaS), Flight Software Simulation as a Service, etc.

  6. Engine Tune-Up Service. Unit 5: Fuel and Carburetion Systems. Student Guide. Automotive Mechanics Curriculum.

    Science.gov (United States)

    Goodson, Ludy

    This student guide is for Unit 5, Fuel and Carburetion Systems, in the Engine Tune-Up Service portion of the Automotive Mechanics Curriculum. It deals with inspecting and servicing the fuel and carburetion systems. A companion review exercise book and posttests are available separately as CE 031 218-219. An introduction tells how this unit fits…

  7. Experience of Areva in fuel services for PWR and BWR; Experiencia de Areva en servicios de combustible para PWR y BWR

    Energy Technology Data Exchange (ETDEWEB)

    Morales, I.

    2015-07-01

    AREVA being an integrated supplier of fuel assemblies has included in its strategy to develop services and solutions to customers who desire to improve the performance and safety of their fuel. These services go beyond the simple 'after sale' services that can be expected from a fuel supplier: The portfolio of AREVA includes a wide variety of services, from scientific calculations to fuel handling services in a nuclear power plant. AREVA is committed to collaborate and to propose best-in-class solutions that really make the difference for the customer, based on 40 years of Fuel design and manufacturing experience. (Author)

  8. Available reprocessing and recycling services for research reactor spent nuclear fuel

    Energy Technology Data Exchange (ETDEWEB)

    Tozser, Sandor; Marshall, Frances M.; Adelfang, Pablo; Bradley, Edward [International Atomic Energy Agency, Vienna (Austria); Budu, Madalina Elena [SOSNY Research and Development Company, Moscow (Russian Federation); Chiguer, Mustapha [AREVA, Paris La Defense (France)

    2016-03-15

    International activities in the back end of the research reactor (RR) fuel cycle have so far been dominated by the programmes of acceptance of highly-enriched uranium (HEU) spent nuclear fuel (SNF) by the country where it was originally enriched. In the future inventories of LEU SNF will continue to be created and the back end solution of RR SNF remains a critical issue. The IAEA, based on the experience gained during the decade of international cooperation in supporting the objectives of the HEU take-back programmes, drew up a report presenting available reprocessing and recycling services for RR SNF. This paper gives an overview of the report, which will address all aspects of reprocessing and recycling services for RR SNF.

  9. Serviceability of rod ceramic fuel pins on motoring conditions of FTP or NEMF reactor

    International Nuclear Information System (INIS)

    Deryavko, I.I.

    2004-01-01

    The operation conditions of rod ceramic fuel pins in the running hydrogen-cooled technological canals of FTP or NEMF reactor on the motoring conditions are considered. The available postreactor researches of the fuel pins are presented and the additional postreactor researches of fuel pins, tested on this mode in IVG.1 and IRGIT reactors, are carried out. The fuel pins serviceability on motoring conditions of FTP or NEF reactor operation is concluded. (author)

  10. Effect of Outsourced Pharmacies of Rural Healthcare Centers on Service Quality in Abharand Soltanieh Counties

    Directory of Open Access Journals (Sweden)

    Ali Maher

    2016-05-01

    Full Text Available Recently, a part of healthcare services has been assigned to the private sector to increase the quality of medical services, increase patient satisfaction and reduce costs. In this regard, the outsourcing approach has been significantly considered for pharmaceutical services provided by healthcare centers. The purpose of this study is to evaluate the effect of outsourced pharmacies of rural healthcare centers on service quality using structural equations modelling. The methodology used was descriptive using correlation by structural equations modelling. The studied population included those patients who provided their medicines from pharmacies of rural healthcare centers in Abhar and Soltanieh counties. The samples included 384 of these patients. Data was collected by outsourcing and service quality questionnaires. A structural equation modelling was used to analyze data by LISREAL software. Results indicated a positive significant effect of outsourced pharmacies of rural healthcare centers on quality of tangibles, reliability, responsiveness, assurance and empathy. findings emphasize the role of outsourcing on quality of services. Outsourced pharmacies of rural healthcare centers of Abhar and Soltanieh counties lead to improved service quality.

  11. Mississippi State University Cooling, Heating, and Power (Micro-CHP) and Bio-Fuel Center

    Energy Technology Data Exchange (ETDEWEB)

    Mago, Pedro [Mississippi State Univ., Mississippi State, MS (United States); Newell, LeLe [Mississippi State Univ., Mississippi State, MS (United States)

    2014-01-31

    Between 2008 and 2014, the U.S. Department of Energy funded the MSU Micro-CHP and Bio-Fuel Center located at Mississippi State University. The overall objective of this project was to enable micro-CHP (micro-combined heat and power) utilization, to facilitate and promote the use of CHP systems and to educate architects, engineers, and agricultural producers and scientists on the benefits of CHP systems. Therefore, the work of the Center focused on the three areas: CHP system modeling and optimization, outreach, and research. In general, the results obtained from this project demonstrated that CHP systems are attractive because they can provide energy, environmental, and economic benefits. Some of these benefits include the potential to reduce operational cost, carbon dioxide emissions, primary energy consumption, and power reliability during electric grid disruptions. The knowledge disseminated in numerous journal and conference papers from the outcomes of this project is beneficial to engineers, architects, agricultural producers, scientists and the public in general who are interested in CHP technology and applications. In addition, more than 48 graduate students and 23 undergraduate students, benefited from the training and research performed in the MSU Micro-CHP and Bio-Fuel Center.

  12. British Nuclear Fuels plc's effluent plant services building

    International Nuclear Information System (INIS)

    Williams, L.

    1990-01-01

    The new Effluent Plant Services building (EPSB) on the Sellafield Nine Acre Site was built by Costain Engineering Limited for British Nuclear Fuels Limited. The EPSB is dedicated to a new generation of nuclear waste treatment plants, aimed at reducing discharges into the Irish Sea and other environmental impacts by removing actinides from liquid effluents and decontaminating waste solvents. This article describes the design, construction and operation of the plant. (UK)

  13. Experience with ANSI N14.30 for in-service inspections of semi-trailer used for spent fuel shipments

    International Nuclear Information System (INIS)

    Hirtz, G.J.

    1998-05-01

    On July 18, 1996, the Oak Ridge National Laboratory (ORNL) resumed shipping spent fuel in interstate commerce after a 10 year suspension of this activity. This shipment was conducted using a Nuclear Regulatory Commission licensed spent fuel transport package purchased from General Electric Company by ORNL for the purpose of moving High Flux Isotope Reactor spent fuel to the Savannah River Site. The trailer, fabricated to the ANSI N14.30, Semi-Trailers Employed in the Highway Transport of Weight Concentrated Radioactive Loads Design, Fabrication, and Maintenance, has recently undergone its first scheduled in-service inspection. This paper presents the experience gained from interpretation and application of the ANSI N14.30 standard focusing on the in-service inspection for the structure of the trailer. Initially, the term weight concentrated is illustrated giving detail to the location and center of gravity of the 33,500 pound shipping container and forces induced by the tie down system. Basic information about the design stresses and initial testing provided by the manufacturer are used as a lead-in to the requirements of the standard. The task of examining the trailer structure provided many lessons and required considerable effort. All of the support personnel were provided by ORNL; the garage mechanics and the certified inspection engineers had never been involved in applying ANSI N14.30. Other obstacles were the lack of existing inspection procedures for this particular activity and the lack of a previous experience interpreting the standard with regard to repair work. Some of these questions were resolved by clarification received from the writers of the standard, and others were resolved by the teamwork between the manufacturer and ORNL. This experience illustrated the importance of the trailer manufacturer as a participant in the decisions made concerning in-service inspection and maintenance

  14. Utilization of maternal health services in rural primary health centers ...

    African Journals Online (AJOL)

    Utilization of maternal health services in rural primary health centers in Sub- Saharan Africa. ... their pregnancies were normal during antenatal care visits, hostile attitude of health workers, poverty and mode of payment. Majority of the PHCs provided antenatal, normal delivery, and post natal services. Rural mothers lacked ...

  15. Four aspects of the scope and quality of family planning services in US publicly funded health centers: Results from a survey of health center administrators.

    Science.gov (United States)

    Carter, Marion W; Gavin, Loretta; Zapata, Lauren B; Bornstein, Marta; Mautone-Smith, Nancy; Moskosky, Susan B

    2016-10-01

    This study aims to describe aspects of the scope and quality of family planning services provided by US publicly funded health centers before the release of relevant federal recommendations. Using nationally representative survey data (N=1615), we describe four aspects of service delivery: family planning services provided, contraceptive methods provided onsite, written contraceptive counseling protocols and youth-friendly services. We created a count index for each issue and used multivariable ordered logistic regression to identify health center characteristics associated with scoring higher on each. Half of the sample received Title X funding and about a third each were a community health center or health department clinic. The vast majority reported frequently providing contraceptive services (89%) and STD services (87%) for women in the past 3 months. Service provision to males was substantially lower except for STD screening. A total of 63% and 48% of health centers provided hormonal IUDs and implants onsite in the past 3 months, respectively. Forty percent of health centers included all five recommended contraceptive counseling practices in written protocols. Of youth-friendly services, active promotion of confidential services was among the most commonly reported (83%); offering weekend/evening hours was among the least (42%). In multivariable analyses, receiving Title X funding, having larger volumes of family planning clients and being a Planned Parenthood clinic were associated with higher scores on most indices. Many services were consistent with the recommendations for providing quality family planning services, but there was room for improvement across domains and health centers types. As assessed in this paper, the scope and quality of these family planning services was relatively high, particularly among Planned Parenthood clinics and Title X-funded centers. However, results point to important areas for improvement. Future studies should assess

  16. 41 CFR 101-30.504 - Cataloging data from Defense Logistics Services Center (DLSC).

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Cataloging data from Defense Logistics Services Center (DLSC). 101-30.504 Section 101-30.504 Public Contracts and Property... data from Defense Logistics Services Center (DLSC). Upon receipt of cataloging data from civil agencies...

  17. Engine Tune-Up Service. Unit 5: Fuel and Carburetion Systems. Review Exercise Book. Automotive Mechanics Curriculum.

    Science.gov (United States)

    Goodson, Ludy

    This book of pretests and review exercises is designed to accompany the Engine Tune-Up Service Student Guide for Unit 5, Fuel and Carburetion Systems, available separately as CE 031 217. Focus of the exercises and pretests is inspecting and servicing the fuel and carburetion systems. Pretests and performance checklists are provided for each of the…

  18. Utilization of Mental Health Services in School-Based Health Centers

    Science.gov (United States)

    Bains, Ranbir M.; Cusson, Regina; White-Frese, Jesse; Walsh, Stephen

    2017-01-01

    Background: We summarize utilization patterns for mental health services in school-based health centers. Methods: Administrative data on school-based health center visits in New Haven, Connecticut were examined for the 2007-2009 school years. Relative frequencies of mental health visits by age were calculated as a percentage of all visits and were…

  19. Innovation in user-centered skills and performance improvement for sustainable complex service systems.

    Science.gov (United States)

    Karwowski, Waldemar; Ahram, Tareq Z

    2012-01-01

    In order to leverage individual and organizational learning and to remain competitive in current turbulent markets it is important for employees, managers, planners and leaders to perform at high levels over time. Employee competence and skills are extremely important matters in view of the general shortage of talent and the mobility of employees with talent. Two factors emerged to have the greatest impact on the competitiveness of complex service systems: improving managerial and employee's knowledge attainment for skills, and improving the training and development of the workforce. This paper introduces the knowledge-based user-centered service design approach for sustainable skill and performance improvement in education, design and modeling of the next generation of complex service systems. The rest of the paper cover topics in human factors and sustainable business process modeling for the service industry, and illustrates the user-centered service system development cycle with the integration of systems engineering concepts in service systems. A roadmap for designing service systems of the future is discussed. The framework introduced in this paper is based on key user-centered design principles and systems engineering applications to support service competitiveness.

  20. Recent Developments in the Management of Cameco Corporation's Fuel Services Division Waste - 13144

    International Nuclear Information System (INIS)

    Smith, Thomas P.

    2013-01-01

    Cameco Corporation is a world leader in uranium production. Headquartered in Saskatoon, Saskatchewan our operations provide 16% of the world uranium mine production and we have approximately 435 million pounds of proven and probable uranium reserves. Cameco mining operations are located in Saskatchewan, Wyoming, Nebraska and Kazakhstan. Cameco is also a major supplier of uranium processing services required to produce fuel for the generation of clean energy. These operations are based in Blind River, Cobourg and Port Hope, Ontario and are collectively referred to as the Fuel Services Division. The Fuel Services Division produces uranium trioxide from uranium ore concentrate at the Blind River Refinery. Cameco produces uranium hexafluoride and uranium dioxide at the Port Hope Conversion Facility. Cameco operates a fuel manufacturing facility in Port Hope, Ontario and a metal fabrication facility located in Cobourg, Ontario. The company manufactures fuel bundles utilized in the Candu reactors. Cameco's Fuel Services Division produces several types of low-level radioactively contaminated wastes. Internal processing capabilities at both the Blind River Refinery and Port Hope Conversion Facility are extensive and allow for the recycling of several types of waste. Notwithstanding these capabilities there are certain wastes that are not amenable to the internal processing capabilities and must be disposed of appropriately. Disposal options for low-level radioactively contaminated wastes in Canada are limited primarily due to cost considerations. In recent years, Cameco has started to ship marginally contaminated wastes (<500 ppm uranium) to the United States for disposal in an appropriate landfill. The landfill is owned by US Ecology Incorporated and is located near Grand View, Idaho 70 miles southeast of Boise in the Owyhee Desert. The facility treats and disposes hazardous waste, non-hazardous industrial waste and low-activity radioactive material. The site's arid

  1. Economic and Nonproliferation Analysis Framework for Assessing Reliable Nuclear Fuel Service Arrangements

    International Nuclear Information System (INIS)

    Phillips, Jon R.; Kreyling, Sean J.; Short, Steven M.; Weimar, Mark R.

    2010-01-01

    Nuclear power is now broadly recognized as an essential technology in national strategies to provide energy security while meeting carbon management goals. Yet a long standing conundrum remains: how to enable rapid growth in the global nuclear power infrastructure while controlling the spread of sensitive enrichment and reprocessing technologies that lie at the heart of nuclear fuel supply and nuclear weapons programs. Reducing the latent proliferation risk posed by a broader horizontal spread of enrichment and reprocessing technology has been a primary goal of national nuclear supplier policies since the beginning of the nuclear power age. Attempts to control the spread of sensitive nuclear technology have been the subject of numerous initiatives in the intervening decades sometimes taking the form of calls to develop fuel supply and service assurances to reduce market pull to increase the number of states with fuel cycle capabilities. A clear understanding of what characteristics of specific reliable nuclear fuel service (RNFS) and supply arrangements qualify them as 'attractive offers' is critical to the success of current and future efforts. At a minimum, RNFS arrangements should provide economic value to all participants and help reduce latent proliferation risks posed by the global expansion of nuclear power. In order to inform the technical debate and the development of policy, Pacific Northwest National Laboratory has been developing an analytical framework to evaluate the economics and nonproliferation merits of alternative approaches to RNFS arrangements. This paper provides a brief overview of the economic analysis framework developed and applied to a model problem of current interest: full-service nuclear fuel leasing arrangements. Furthermore, this paper presents an extended outline of a proposed analysis approach to evaluate the non-proliferation merits of various RNFS alternatives.

  2. Experience with Server Self Service Center (S3C)

    International Nuclear Information System (INIS)

    Sucik, Juraj; Bukowiec, Sebastian

    2010-01-01

    CERN has a successful experience with running Server Self Service Center (S3C) for virtual server provisioning which is based on Microsoft (registered) Virtual Server 2005. With the introduction of Windows Server 2008 and its built-in hypervisor based virtualization (Hyper-V) there are new possibilities for the expansion of the current service. This paper describes the architecture of the redesigned virtual Server Self Service based on Hyper-V which provides dynamically scalable virtualized resources on demand as needed and outlines the possible implications on the future use of virtual machines at CERN.

  3. Experience with Server Self Service Center (S3C)

    CERN Multimedia

    Sucik, J

    2009-01-01

    CERN has a successful experience with running Server Self Service Center (S3C) for virtual server provisioning which is based on Microsoft® Virtual Server 2005. With the introduction of Windows Server 2008 and its built-in hypervisor based virtualization (Hyper-V) there are new possibilities for the expansion of the current service. This paper describes the architecture of the redesigned virtual Server Self Service based on Hyper-V which provides dynamically scalable virtualized resources on demand as needed and outlines the possible implications on the future use of virtual machines at CERN.

  4. Medical service plans in academic medical centers.

    Science.gov (United States)

    Siegel, B

    1978-10-01

    Medical service plans are of major importance to academic medical centers and are becoming increasingly so each year as evidenced by growing dependence of medical schools on resulting funds. How these funds are generated and used varies among schools. The procedures may affect the governance of the institution, modifying the authority of the central administration or the clinical departments. Recent developments in federal legislation, such as health maintenance organizations and amendments (Section 227) to the Social Security Act, and the future development of national health insurance will certainly have an effect on how academic medical centers organize their clinical activities. How successfully various medical schools deal with the dynamic problem may well determine their future survival.

  5. Value-added Data Services at the Goddard Earth Sciences Data and Information Services Center

    Science.gov (United States)

    Leptoukh, G. G.; Alcott, G. T.; Kempler, S. J.; Lynnes, C. S.; Vollmer, B. E.

    2004-05-01

    The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC), in addition to serving the Earth Science community as one of the major Distributed Active Archive Centers (DAACs), provides much more than just data. Among the value-added services available to general users are subsetting data spatially and/or by parameter, online analysis (to avoid downloading unnecessary all the data), and assistance in obtaining data from other centers. Services available to data producers and high-volume users include consulting on building new products with standard formats and metadata and construction of data management systems. A particularly useful service is data processing at the DISC (i.e., close to the input data) with the users' algorithms. This can take a number of different forms: as a configuration-managed algorithm within the main processing stream; as a stand-alone program next to the on-line data storage; as build-it-yourself code within the Near-Archive Data Mining (NADM) system; or as an on-the-fly analysis with simple algorithms embedded into the web-based tools. Partnerships between the GES DISC and scientists, both producers and users, allow the scientists concentrate on science, while the GES DISC handles the of data management, e.g., formats, integration and data processing. The existing data management infrastructure at the GES DISC supports a wide spectrum of options: from simple data support to sophisticated on-line analysis tools, producing economies of scale and rapid time-to-deploy. At the same time, such partnerships allow the GES DISC to serve the user community more efficiently and to better prioritize on-line holdings. Several examples of successful partnerships are described in the presentation.

  6. 77 FR 72868 - The Centers for Disease Control (CDC)/Health Resources and Services Administration (HRSA...

    Science.gov (United States)

    2012-12-06

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention The Centers for Disease Control (CDC)/Health Resources and Services Administration (HRSA) Advisory Committee on HIV, Viral... announcements of meetings and other committee management activities, for both the Centers for Disease Control...

  7. Domestic fuel oil spill prevention committee : report to Ministers of Government Services and Lands and Environment

    International Nuclear Information System (INIS)

    2001-07-01

    The number of reported spills from domestic fuel oil systems increased dramatically in Newfoundland, which prompted the Minister of Government Services and Lands to arrange a meeting with representatives from consumers, the fuel service industry and the insurance industry to ensure proper measures were taken for the prevention of domestic fuel spills. A joint committee consisting of industry and government representatives was formed as a result of this meeting, to examine and investigate the situation and report to the Minister of Government Services and Lands. Advice on means to address the problems associated with domestic fuel oil spills was provided, as well as mechanisms to minimize such occurrences in the future. Also included in the review were small commercial storage tanks units of no more than 2500 litres, as small commercial establishments often have heating systems similar in size to residential units. Gradual leaks that go undetected for years often occur, as do the catastrophic rupture of the fuel storage tank itself. Rusting and exterior tubing are some of the causes of spills. The contamination of surrounding soil and/or groundwater can occur as a result of the spills, and fumes can enter residences through foundation walls of the sewer system. Condensation within the tank can lead to corrosion of the fuel tanks. A number of recommendations were made in the report, such as the establishment of regulations pertaining to the construction, installation, servicing and fueling of domestic and small commercial fuel systems, the proper enforcement of the regulations, a public education campaign, an emergency response capability, tax incentives to consumers for expenditures associated with the upgrading or replacement of inadequate systems, support funding, the establishment of an emergency respond fund, and environmental cleanup requirements. figs

  8. Mental Health Services in School-Based Health Centers: Systematic Review

    Science.gov (United States)

    Bains, Ranbir Mangat; Diallo, Ana F.

    2016-01-01

    Mental health issues affect 20-25% of children and adolescents, of which few receive services. School-based health centers (SBHCs) provide access to mental health services to children and adolescents within their schools. A systematic review of literature was undertaken to review evidence on the effectiveness of delivery of mental health services…

  9. Service Delivery and Related Issues at the Trace Research and Development Center.

    Science.gov (United States)

    Smith, R. O.

    The environmental context of the Trace Center is first briefly described as background for a more detailed description of the center's service delivery activities in the field of rehabilitation/education technology. Trace serves four major functions in rehabilitation/education technology. As a nationally funded rehabilitation engineering center,…

  10. Alternative Fuels Data Center: Publications

    Science.gov (United States)

    Windstars; 14) and the use of alternative fuel vehicles at the Olympics. Alternative Fuels In Trucking, Vol and their economic and environmental benefits. This report is designed to share the experiences and National Academy of Engineering suggested that 'DOE might have its greatest impact by leading the private

  11. Fuel Cell Demonstration Project - 200 kW - Phosphoric Acid Fuel Cell Power Plant Located at the National Transportation Research Center: FINAL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    Berry, JB

    2005-05-06

    Oak Ridge National Laboratory (ORNL) researches and develops distributed generation technology for the Department of Energy, Energy Efficiency and Renewable Energy Distributed Energy Program. This report describes installation and operation of one such distributed generation system, a United Technology Corporation fuel cell located at the National Transportation Research Center in Knoxville, Tennessee. Data collected from June 2003 to June of 2004, provides valuable insight regarding fuel cell-grid compatibility and the cost-benefit of the fuel cell operation. The NTRC fuel cell included a high-heat recovery option so that use of thermal energy improves project economics and improves system efficiency to 59% year round. During the year the fuel cell supplied a total of 834MWh to the NTRC and provided 300MBtu of hot water. Installation of the NTRC fuel cell was funded by the Distributed Energy Program with partial funding from the Department of Defense's Climate Change Fuel Cell Buy Down Program, administered by the National Energy Technology Laboratory. On-going operational expenses are funded by ORNL's utility budget and are paid from operational cost savings. Technical information and the benefit-cost of the fuel cell are both evaluated in this report and sister reports.

  12. [The Engineering and Technical Services Directorate at the Glenn Research Center

    Science.gov (United States)

    Moon, James

    2004-01-01

    My name is James Moon and I am a senior at Tennessee State University where my major is Aeronautical and Industrial Technology with a concentration in industrial electronics. I am currently serving my internship in the Engineering and Technical Services Directorate at the Glenn Research Center (GRC). The Engineering and Technical Service Directorate provides the services and infrastructure for the Glenn Research Center to take research concepts to reality. They provide a full range of integrated services including engineering, advanced prototyping and testing, facility management, and information technology for NASA, industry, and academia. Engineering and Technical Services contains the core knowledge in Information Technology (IT). This includes data systems and analysis, inter and intranet based systems design and data security. Including the design and development of embedded real-time s o h a r e applications for flight and supporting ground systems, Engineering and Technical Services provide a wide range of IT services and products specific to the Glenn Research Center research and engineering community. In the 7000 Directorate I work directly in the 7611 organization. This organization is known as the Aviation Environments Technical Branch. My mentor is Vincent Satterwhite who is also the Branch Chief of the Aviation Environments Technical Branch. In this branch, I serve as the Assistant program manager of the Engineering Technology Program. The Engineering Technology Program (ETP) is one of three components of the High School L.E.R.C.I.P. This is an Agency-sponsored, eight-week research-based apprenticeship program designed to attract traditionally underrepresented high school students that demonstrate an aptitude for and interest in mathematics, science, engineering, and technology.

  13. Family-centered services for children with complex communication needs: the practices and beliefs of school-based speech-language pathologists.

    Science.gov (United States)

    Mandak, Kelsey; Light, Janice

    2018-06-01

    This study used an online focus group to examine the beliefs and practices of school-based speech-language pathologists (SLPs) who served children with complex communication needs regarding their provision of family-centered services. Participants revealed that despite their desire for family involvement and reported beliefs in the importance of family-centered services, there were barriers in place that often limited family-centered service provision. Across the SLPs, many were dissatisfied with their current provision of family-centered services. The SLPs varied in their reported practices, with some reporting family-centered services and others, professional-centered services. Future research is recommended in order to investigate which factors contribute to the variation among SLPs and how the variation impacts children who require augmentative and alternative communication (AAC) and their families. Potential clinical implications for in-service and pre-service SLPs are discussed to improve future family-centered AAC services.

  14. Redundancy of Supply in the International Nuclear Fuel Fabrication Market: Are Fabrication Services Assured?

    International Nuclear Information System (INIS)

    Seward, Amy M.; Toomey, Christopher; Ford, Benjamin E.; Wood, Thomas W.; Perkins, Casey J.

    2011-01-01

    For several years, Pacific Northwest National Laboratory (PNNL) has been assessing the reliability of nuclear fuel supply in support of the U.S. Department of Energy/National Nuclear Security Administration. Three international low enriched uranium reserves, which are intended back up the existing and well-functioning nuclear fuel market, are currently moving toward implementation. These backup reserves are intended to provide countries credible assurance that of the uninterrupted supply of nuclear fuel to operate their nuclear power reactors in the event that their primary fuel supply is disrupted, whether for political or other reasons. The efficacy of these backup reserves, however, may be constrained without redundant fabrication services. This report presents the findings of a recent PNNL study that simulated outages of varying durations at specific nuclear fuel fabrication plants. The modeling specifically enabled prediction and visualization of the reactors affected and the degree of fuel delivery delay. The results thus provide insight on the extent of vulnerability to nuclear fuel supply disruption at the level of individual fabrication plants, reactors, and countries. The simulation studies demonstrate that, when a reasonable set of qualification criteria are applied, existing fabrication plants are technically qualified to provide backup fabrication services to the majority of the world's power reactors. The report concludes with an assessment of the redundancy of fuel supply in the nuclear fuel market, and a description of potential extra-market mechanisms to enhance the security of fuel supply in cases where it may be warranted. This report is an assessment of the ability of the existing market to respond to supply disruptions that occur for technical reasons. A forthcoming report will address political disruption scenarios.

  15. 78 FR 63518 - Uranium Enrichment Fuel Cycle Inspection Reports Regarding Louisiana Energy Services, National...

    Science.gov (United States)

    2013-10-24

    ... NUCLEAR REGULATORY COMMISSION [Docket No. 70-3103; NRC-2010-0264] Uranium Enrichment Fuel Cycle Inspection Reports Regarding Louisiana Energy Services, National Enrichment Facility, Eunice, New Mexico... Louisiana Energy Services (LES), LLC, National Enrichment Facility in Eunice, New Mexico, and has authorized...

  16. Available Reprocessing and Recycling Services for Research Reactor Spent Nuclear Fuel

    International Nuclear Information System (INIS)

    2017-01-01

    The high enriched uranium (HEU) take back programmes will soon have achieved their goals. When there are no longer HEU inventories at research reactors and no commerce in HEU for research reactors, the primary driver for the take back programmes will cease. However, research reactors will continue to operate in order to meet their various mission objectives. As a result, inventories of low enriched uranium spent nuclear fuel will continue to be created during the research reactors' lifetime and, therefore, there is a need to develop national final disposition routes. This publication is designed to address the issues of available reprocessing and recycling services for research reactor spent fuel and discusses the various back end management aspects of the research reactor fuel cycle.

  17. Investigation of fuel savings for an aircraft due to optimization of the center of gravity

    Science.gov (United States)

    Liu, Yitao; Yang, Zhenbo; Deng, Junxiang; Zhu, Junjie

    2018-03-01

    The aircraft’s center of gravity (CG) has a significant influence on the safety and efficiency, which are determined to a large degree by keeping the CG position within the forward and aft limits. Improper loading reduces the aerodynamics efficiency of an aircraft, resulting in higher flight drag. This paper focuses on the theoretical analysis of the influence of variable CG parameter on the fuel consumption. A new model is developed to predict the fuel consumption rate for an aircraft with it’s CG at different position. The numerical result indicates that a more aft CG position produces less drag and, in turn, requires less fuel consumption.

  18. [Patient-centered medicine for tuberculosis medical services].

    Science.gov (United States)

    Fujita, Akira; Narita, Tomoyo

    2012-12-01

    The 2011 edition of Specific Guiding Principles for Tuberculosis Prevention calls for a streamlined medical services system capable of providing medical care that is customized to the patient's needs. The new 21st Century Japanese version of the Directly Observed Treatment Short Course (DOTS) expands the indication of DOTS to all tuberculosis (TB) patients in need of treatment. Hospital DOTS consists of comprehensive, patient-centered support provided by a DOTS care team. For DOTS in the field, health care providers should select optimal administration support based on patient profiles and local circumstances. In accordance with medical fee revisions for 2012, basic inpatient fees have been raised and new standards for TB hospitals have been established, the result of efforts made by the Japanese Society for Tuberculosis and other associated groups. It is important that the medical care system be improved so that patients can actively engage themselves as a member of the team, for the ultimate goal of practicing patient-centered medicine. We have organized this symposium to explore the best ways for practicing patient-centered medicine in treating TB. It is our sincere hope that this symposium will lead to improved medical treatment for TB patients. 1. Providing patient-centered TB service via utilization of collaborative care pathway: Akiko MATSUOKA (Hiroshima Prefectural Tobu Public Health Center) We have been using two types of collaborative care pathway as one of the means of providing patient-centered TB services since 2008. The first is the clinical pathway, which is mainly used by TB specialist doctors to communicate with local practitioners on future treatment plan (e.g. medication and treatment duration) of patients. The clinical pathway was first piloted in Onomichi district and its use was later expanded to the whole of Hiroshima prefecture. The second is the regional care pathway, which is used to share treatment progress, test results and other

  19. Hydrogen-Oxygen PEM Regenerative Fuel Cell at NASA Glenn Research Center

    Science.gov (United States)

    Bents, David J.

    2004-01-01

    The NASA Glenn Research Center has constructed a closed-cycle hydrogen-oxygen PEM regenerative fuel cell (RFC) to explore its potential use as an energy storage device for a high altitude solar electric aircraft. Built up over the last 2 years from specialized hardware and off the shelf components the Glenn RFC is a complete "brassboard" energy storage system which includes all the equipment required to (1) absorb electrical power from an outside source and store it as pressurized hydrogen and oxygen and (2) make electrical power from the stored gases, saving the product water for re-use during the next cycle. It consists of a dedicated hydrogen-oxygen fuel cell stack and an electrolyzer stack, the interconnecting plumbing and valves, cooling pumps, water transfer pumps, gas recirculation pumps, phase separators, storage tanks for oxygen (O2) and hydrogen (H2), heat exchangers, isolation valves, pressure regulators, nitrogen purge provisions, instrumentation, and other components. It specific developmental functions include: (1) Test fuel cells and fuel cell components under repeated closed-cycle operation (nothing escapes; everything is used over and over again). (2) Simulate diurnal charge-discharge cycles (3) Observe long-term system performance and identify degradation and loss mechanisms. (4) Develop safe and convenient operation and control strategies leading to the successful development of mission-capable, flight-weight RFC's.

  20. Service of Remembrance: a comprehensive cancer center's response to bereaved family members.

    Science.gov (United States)

    Knight, Louise; Cooper, Rhonda S; Hypki, Cinder

    2012-01-01

    Comprehensive cancer centers that offer an array of clinical trials and treatment options often experience significant patient mortality rates. Bereavement resources may not be routinely incorporated into the service delivery model in these specialty hospitals. In response, an interdisciplinary team at one cancer center proposed, planned, and implemented an annual Service of Remembrance. The incorporation of music, poetry, and visual arts was important in designing a program that would provide a meaningful, spiritual experience. A community artist who designed an interactive memorial art piece played a pivotal role. This article outlines the process of institutional culture change and describes future challenges in the implementation of this type of bereavement service.

  1. Implementation and operational experience of an integrated fuel information service at the BNFL THORP facility

    International Nuclear Information System (INIS)

    Robson, D.N.; Ramsden, P.N.

    1995-01-01

    BNFL's THORP Plant, which started active operations early in 1994, has contracts to reprocess 7000t(U) of fuel belonging to 33 customers in 9 countries in the UK, Europe and Japan during its first 10 years of operation. Contracts are in place or being negotiated, and further business sought after, with the expectation of extending THORP's operations well beyond the initial 10 years. An integrated data management service, for the fuel storage areas of BNFL's THORP Division, is being implemented to replace several, independent, systems. This Fuel Information Service (FIS) will bring the Nuclear Materials Accountancy and Safeguards Records together with the Operating Records into one database from which all Safeguards Reports will be made. BNFL's contractual and commercial data and technical data on the stored fuel, required to support the reprocessing business, will also be brought into the common database. FIS is the first stage in a project to integrate the Materials Management systems throughout the THORP nuclear recycling business including irradiated fuel receipt and storage, reprocessing and storage of products, mixed oxide fuel manufacture and the conditioning and storage of wastes

  2. 75 FR 78997 - Centers for Disease Control and Prevention/Health Resources and Services Administration (CDC/HRSA...

    Science.gov (United States)

    2010-12-17

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Centers for Disease Control and Prevention/Health Resources and Services Administration (CDC/HRSA) Advisory Committee... and other committee management activities, for both the Centers for Disease Control and Prevention and...

  3. Test of Hydrogen-Oxygen PEM Fuel Cell Stack at NASA Glenn Research Center

    Science.gov (United States)

    Bents, David J.; Scullin, Vincent J.; Chang, Bei-Jiann; Johnson, Donald W.; Garcia, Christopher P.; Jakupca, Ian J.

    2003-01-01

    This paper describes performance characterization tests of a 64 cell hydrogen oxygen PEM fuel cell stack at NASA Glenn Research Center in February 2003. The tests were part of NASA's ongoing effort to develop a regenerative fuel cell for aerospace energy storage applications. The purpose of the tests was to verify capability of this stack to operate within a regenerative fuel cell, and to compare performance with earlier test results recorded by the stack developer. Test results obtained include polarization performance of the stack at 50 and 100 psig system pressure, and a steady state endurance run at 100 psig. A maximum power output of 4.8 kWe was observed during polarization runs, and the stack sustained a steady power output of 4.0 kWe during the endurance run. The performance data obtained from these tests compare reasonably close to the stack developer's results although some additional spread between best to worst performing cell voltages was observed. Throughout the tests, the stack demonstrated the consistent performance and repeatable behavior required for regenerative fuel cell operation.

  4. Goddard Earth Sciences Data and Information Services Center (GES DISC)

    Data.gov (United States)

    National Aeronautics and Space Administration — The NASA Goddard Earth Sciences (GES) Data and Information Services Center (DISC) is the home (archive) of Precipitation, Atmospheric Chemistry and Dynamics, and...

  5. Harvard Catalyst | The Clinical Translational Science Center IND/IDE Consult Service: providing an IND/IDE consult service in a decentralized network of academic healthcare centers.

    Science.gov (United States)

    Kim, Min J; Winkler, Sabune J; Bierer, Barbara E; Wolf, Delia

    2014-04-01

    The Food and Drug Administration (FDA) regulations require sponsors of clinical investigations involving an investigational drug or device to submit an Investigational New Drug (IND) or Investigational Device Exemption (IDE) application. Strict adherence to applicable regulations is vital to the success of clinical research. Unlike most major pharmaceutical sponsors, investigator sponsors often do not fully appreciate their regulatory obligations nor have resources to ensure compliance. As a result they can place themselves and their institutions at risk. Nevertheless, investigator-initiated clinical trials are vital to the further development of innovative drugs, biologics, and medical devices. The IND/IDE Subcommittee under the Regulatory Knowledge and Support Program at Harvard Catalyst, The Harvard Clinical and Translational Science Center worked in collaboration with Harvard and Harvard affiliated institutions to create and launch an IND/IDE Consult Service in a decentralized network of collaborating Academic Healthcare Centers (AHC). The IND/IDE Consult Service offers expertise, resources, and shared experiences to assist sponsor-investigators and IRBs in meeting regulatory requirements for conducting and reviewing investigator-initiated IND/IDE studies. The scope of the services provided by the Harvard Catalyst IND/IDE Consult Service are described, including the specifics of the service, lessons learned, and challenges faced, in a scalable model that builds inter-institutional capacity. © 2014 Wiley Periodicals, Inc.

  6. Harvard Catalyst | The Clinical Translational Science Center IND/IDE Consult Service: Providing an IND/IDE Consult Service in a Decentralized Network of Academic Healthcare Centers

    Science.gov (United States)

    Winkler, Sabune J.; Bierer, Barbara E.; Wolf, Delia

    2014-01-01

    Abstract The Food and Drug Administration (FDA) regulations require sponsors of clinical investigations involving an investigational drug or device to submit an Investigational New Drug (IND) or Investigational Device Exemption (IDE) application. Strict adherence to applicable regulations is vital to the success of clinical research. Unlike most major pharmaceutical sponsors, investigator sponsors often do not fully appreciate their regulatory obligations nor have resources to ensure compliance. As a result they can place themselves and their institutions at risk. Nevertheless, investigator‐initiated clinical trials are vital to the further development of innovative drugs, biologics, and medical devices. The IND/IDE Subcommittee under the Regulatory Knowledge and Support Program at Harvard Catalyst, The Harvard Clinical and Translational Science Center worked in collaboration with Harvard and Harvard affiliated institutions to create and launch an IND/IDE Consult Service in a decentralized network of collaborating Academic Healthcare Centers (AHC). The IND/IDE Consult Service offers expertise, resources, and shared experiences to assist sponsor‐investigators and IRBs in meeting regulatory requirements for conducting and reviewing investigator‐initiated IND/IDE studies. The scope of the services provided by the Harvard Catalyst IND/IDE Consult Service are described, including the specifics of the service, lessons learned, and challenges faced, in a scalable model that builds inter‐institutional capacity. PMID:24455986

  7. Geohydrologic conditions at the Nuclear Fuel Reprocessing Plant and Waste-Management Facilities at the western New York Nuclear Service Center, Cattaraugus County, New York

    International Nuclear Information System (INIS)

    Bergeron, M.P.; Kappel, W.M.; Yager, R.M.

    1987-01-01

    A nuclear-fuel reprocessing plant, a high-level radioactive liquid-waste tank complex, and related waste facilities occupy 100 hectares (ha) within the Western New York Nuclear Service Center near West Valley, NY. The facilities are underlain by glacial and postglacial deposits that fill an ancestral bedrock valley. The main plant facilities are on an elevated plateau referred to as the north plateau. Groundwater on the north plateau moves laterally within a surficial sand and gravel from the main plant building to areas northeast, east, and southeast of the facilities. The sand and gravel ranges from 1 to 10 m thick and has a hydraulic conductivity ranging from 0.1 to 7.9 m/day. Two separate burial grounds, a 4-ha area for low-level radioactive waste disposal and a 2.9-ha area for disposal of higher-level waste are excavated into a clay-rich till that ranges from 22 to 28 m thick. Migration of an organic solvent from the area of higher level waste at shallow depth in the till suggests that a shallow, fractured, oxidized, and weathered till is a significant pathway for lateral movement of groundwater. Below this zone, groundwater moves vertically downward through the till to recharge a lacustrine silt and fine sand. Within the saturated parts of the lacustrine unit, groundwater moves laterally to the northeast toward Buttermilk Creek. Hydraulic conductivity of the till, based on field and laboratory analyses, ranges from 0.000018 to 0.000086 m/day

  8. Spent fuel storage facility at science and technical center 'Sosny': Experience of ten years activity

    International Nuclear Information System (INIS)

    Chigrinov, S.; Goulo, V.; Lunev, A.; Belousov, N.; Salnikov, L.; Boiko, L.

    2000-01-01

    Spent fuel storage of the Academic Science and Technical Center in Minsk is in operation already more then 10 years. In the paper aspects of its design, operation practice, problems and decisions for future are discussed. (author)

  9. Viscoelastic response of HTPB based solid fuel to horizontal and vertical storage slumping conditions and it's affect on service life

    International Nuclear Information System (INIS)

    Nawaz, Q.; Nizam, F.

    2011-01-01

    Frequent use of solid fuels as thrust generating energy source in modern day space vehicle systems has created a need to assess their serviceability for long term storage under various conditions. Solid fuel grain, the most important part of any solid fuel system, responds visco elastically to any loading condition. For the assessment of the service life of any solid fuel system, the solid fuel grain has to be structurally evaluated in applied storage conditions. Structural integrity of the grain is exceptionally significant to guarantee the successful operation of the solid fuel system. In this work, numerical simulations have been performed to assess the mechanical stresses and strains induced in an HTPB based solid fuel grain during service life employing ABAQUS standard FEA software using 4-node bilinear quadrilateral elements. For finite element analysis (FEA), typical 2-D and p/nth axisymmetric section of 5-point (n) star grain geometry is considered. Mechanical loads include the horizontal or vertical 1-g (solid fuel weight) storage condition. The simulation results are compared with the analytical results for the same grain geometry. Analytically measured slump deflections in grain segment at various storage times have been found in good relation with the FEA based simulation results. This proves the validity of the procedure adopted and is helpful in assessment of the service life of solid fuel systems. (author)

  10. Barriers to utilization of childbirth services of a rural birthing center in Nepal: A qualitative study.

    Directory of Open Access Journals (Sweden)

    Resham Bahadur Khatri

    Full Text Available Maternal mortality and morbidity are public health problems in Nepal. In rural communities, many women give birth at home without the support of a skilled birth attendant, despite the existence of rural birthing centers. The aim of this study was to explore the barriers and provide pragmatic recommendations for better service delivery and use of rural birthing centers.We conducted 26 in-depth interviews with service users and providers, and three focus group discussions with community key informants in a rural community of Rukum district. We used the Adithya Cattamanchi logic model as a guiding framework for data analysis.Irregular and poor quality services, inadequate human and capital resources, and poor governance were health system challenges which prevented service delivery. Contextual barriers including difficult geography, poor birth preparedness practices, harmful culture practices and traditions and low level of trust were also found to contribute to underutilization of the birthing center.The rural birthing center was not providing quality services when women were in need, which meant women did not use the available services properly because of systematic and contextual barriers. Approaches such as awareness-raising activities, local resource mobilization, ensuring access to skilled providers and equipment and other long-term infrastructure development works could improve the quality and utilization of childbirth services in the rural birthing center. This has resonance for other centers in Nepal and similar countries.

  11. Barriers to utilization of childbirth services of a rural birthing center in Nepal: A qualitative study.

    Science.gov (United States)

    Khatri, Resham Bahadur; Dangi, Tara Prasad; Gautam, Rupesh; Shrestha, Khadka Narayan; Homer, Caroline S E

    2017-01-01

    Maternal mortality and morbidity are public health problems in Nepal. In rural communities, many women give birth at home without the support of a skilled birth attendant, despite the existence of rural birthing centers. The aim of this study was to explore the barriers and provide pragmatic recommendations for better service delivery and use of rural birthing centers. We conducted 26 in-depth interviews with service users and providers, and three focus group discussions with community key informants in a rural community of Rukum district. We used the Adithya Cattamanchi logic model as a guiding framework for data analysis. Irregular and poor quality services, inadequate human and capital resources, and poor governance were health system challenges which prevented service delivery. Contextual barriers including difficult geography, poor birth preparedness practices, harmful culture practices and traditions and low level of trust were also found to contribute to underutilization of the birthing center. The rural birthing center was not providing quality services when women were in need, which meant women did not use the available services properly because of systematic and contextual barriers. Approaches such as awareness-raising activities, local resource mobilization, ensuring access to skilled providers and equipment and other long-term infrastructure development works could improve the quality and utilization of childbirth services in the rural birthing center. This has resonance for other centers in Nepal and similar countries.

  12. Fuel Cell Powered Lift Truck

    Energy Technology Data Exchange (ETDEWEB)

    Moulden, Steve [Sysco Food Service, Houston, TX (United States)

    2015-08-20

    This project, entitled “Recovery Act: Fuel Cell-Powered Lift Truck Sysco (Houston) Fleet Deployment”, was in response to DOE funding opportunity announcement DE-PS36-08GO98009, Topic 7B, which promotes the deployment of fuel cell powered material handling equipment in large, multi-shift distribution centers. This project promoted large-volume commercialdeployments and helped to create a market pull for material handling equipment (MHE) powered fuel cell systems. Specific outcomes and benefits involved the proliferation of fuel cell systems in 5-to 20-kW lift trucks at a high-profile, real-world site that demonstrated the benefits of fuel cell technology and served as a focal point for other nascent customers. The project allowed for the creation of expertise in providing service and support for MHE fuel cell powered systems, growth of existing product manufacturing expertise, and promoted existing fuel cell system and component companies. The project also stimulated other MHE fleet conversions helping to speed the adoption of fuel cell systems and hydrogen fueling technology. This document also contains the lessons learned during the project in order to communicate the successes and difficulties experienced, which could potentially assist others planning similar projects.

  13. Autonomy-Enabled Fuel Savings for Military Vehicles: Report on 2016 Aberdeen Test Center Testing

    Energy Technology Data Exchange (ETDEWEB)

    Ragatz, Adam [National Renewable Energy Lab. (NREL), Golden, CO (United States); Prohaska, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States); Gonder, Jeff [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2017-05-26

    Fuel savings have never been the primary focus for autonomy-enabled military vehicles. However, studies have estimated that autonomy in passenger and commercial vehicles could improve fuel economy by as much as 22%-33% over various drive cycles. If even a fraction of this saving could be realized in military vehicles, significant cost savings could be realized each year through reduced fuel transport missions, reduced fuel purchases, less maintenance, fewer required personnel, and increased vehicle range. Researchers from the National Renewable Energy Laboratory installed advanced data logging equipment and instrumentation on two autonomy-enabled convoy vehicles configured with Lockheed Martin's Autonomous Mobility Applique System to determine system performance and improve on the overall vehicle control strategies of the vehicles. Initial test results from testing conducted at the U.S. Army Aberdeen Test Center at the Aberdeen Proving Grounds are included in this report. Lessons learned from in-use testing and performance results have been provided to the project partners for continued system refinement.

  14. 78 FR 14303 - Statement of Delegation of Authority; Health Resources and Services Administration and Centers...

    Science.gov (United States)

    2013-03-05

    ... Services Administration and Centers for Disease Control and Prevention I hereby delegate to the Administrator, Health Resources and Services Administration (HRSA), and the Director, Centers for Disease Control and Prevention (CDC), with authority to redelegate, the authority vested in the Secretary of the...

  15. Barriers to utilization of childbirth services of a rural birthing center in Nepal: A qualitative study

    Science.gov (United States)

    Shrestha, Khadka Narayan; Homer, Caroline S. E.

    2017-01-01

    Background Maternal mortality and morbidity are public health problems in Nepal. In rural communities, many women give birth at home without the support of a skilled birth attendant, despite the existence of rural birthing centers. The aim of this study was to explore the barriers and provide pragmatic recommendations for better service delivery and use of rural birthing centers. Methods We conducted 26 in-depth interviews with service users and providers, and three focus group discussions with community key informants in a rural community of Rukum district. We used the Adithya Cattamanchi logic model as a guiding framework for data analysis. Results Irregular and poor quality services, inadequate human and capital resources, and poor governance were health system challenges which prevented service delivery. Contextual barriers including difficult geography, poor birth preparedness practices, harmful culture practices and traditions and low level of trust were also found to contribute to underutilization of the birthing center. Conclusion The rural birthing center was not providing quality services when women were in need, which meant women did not use the available services properly because of systematic and contextual barriers. Approaches such as awareness-raising activities, local resource mobilization, ensuring access to skilled providers and equipment and other long-term infrastructure development works could improve the quality and utilization of childbirth services in the rural birthing center. This has resonance for other centers in Nepal and similar countries. PMID:28493987

  16. An Integrated Model for Identifying Linkages Between the Management of Fuel Treatments, Fire and Ecosystem Services

    Science.gov (United States)

    Bart, R. R.; Anderson, S.; Moritz, M.; Plantinga, A.; Tague, C.

    2015-12-01

    Vegetation fuel treatments (e.g. thinning, prescribed burning) are a frequent tool for managing fire-prone landscapes. However, predicting how fuel treatments may affect future wildfire risk and associated ecosystem services, such as forest water availability and streamflow, remains a challenge. This challenge is in part due to the large range of conditions under which fuel treatments may be implemented, as response is likely to vary with species type, rates of vegetation regrowth, meteorological conditions and physiographic properties of the treated site. It is also due to insufficient understanding of how social factors such as political pressure, public demands and economic constraints affect fuel management decisions. To examine the feedbacks between ecological and social dimensions of fuel treatments, we present an integrated model that links a biophysical model that simulates vegetation and hydrology (RHESSys), a fire spread model (WMFire) and an empirical fuel treatment model that accounts for agency decision-making. We use this model to investigate how management decisions affect landscape fuel loads, which in turn affect fire severity and ecosystem services, which feedback to management decisions on fuel treatments. We hypothesize that this latter effect will be driven by salience theory, which predicts that fuel treatments are more likely to occur following major wildfire events. The integrated model provides a flexible framework for answering novel questions about fuel treatments that span social and ecological domains, areas that have previously been treated separately.

  17. About Region 3's Laboratory and Field Services at EPA's Environmental Science Center

    Science.gov (United States)

    Mission & contact information for EPA Region 3's Laboratory and Field Services located at EPA's Environmental Science Center: the Office of Analytical Services and Quality Assurance & Field Inspection Program

  18. 77 FR 18272 - Uranium Enrichment Fuel Cycle Facility Inspection Reports Regarding Louisiana Energy Services LLC...

    Science.gov (United States)

    2012-03-27

    ... NUCLEAR REGULATORY COMMISSION [Docket No. 70-3103; NRC-2010-0264] Uranium Enrichment Fuel Cycle Facility Inspection Reports Regarding Louisiana Energy Services LLC, National Enrichment Facility, Eunice... Louisiana Energy Services (LES), LLC, National enrichment Facility in Eunice, New Mexico, and has verified...

  19. 77 FR 65729 - Uranium Enrichment Fuel Cycle Facility Inspection Reports Regarding Louisiana Energy Services LLC...

    Science.gov (United States)

    2012-10-30

    ... NUCLEAR REGULATORY COMMISSION [Docket No. 70-3103; NRC-2010-0264] Uranium Enrichment Fuel Cycle Facility Inspection Reports Regarding Louisiana Energy Services LLC, National Enrichment Facility, Eunice... Services (LES), LLC, National Enrichment Facility in Eunice, New Mexico, and has verified that cascades...

  20. Recent Developments in the Management of Cameco Corporation's Fuel Services Division Waste - 13144

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Thomas P. [Cameco Corporation, Port Hope, Ontario (Canada)

    2013-07-01

    Cameco Corporation is a world leader in uranium production. Headquartered in Saskatoon, Saskatchewan our operations provide 16% of the world uranium mine production and we have approximately 435 million pounds of proven and probable uranium reserves. Cameco mining operations are located in Saskatchewan, Wyoming, Nebraska and Kazakhstan. Cameco is also a major supplier of uranium processing services required to produce fuel for the generation of clean energy. These operations are based in Blind River, Cobourg and Port Hope, Ontario and are collectively referred to as the Fuel Services Division. The Fuel Services Division produces uranium trioxide from uranium ore concentrate at the Blind River Refinery. Cameco produces uranium hexafluoride and uranium dioxide at the Port Hope Conversion Facility. Cameco operates a fuel manufacturing facility in Port Hope, Ontario and a metal fabrication facility located in Cobourg, Ontario. The company manufactures fuel bundles utilized in the Candu reactors. Cameco's Fuel Services Division produces several types of low-level radioactively contaminated wastes. Internal processing capabilities at both the Blind River Refinery and Port Hope Conversion Facility are extensive and allow for the recycling of several types of waste. Notwithstanding these capabilities there are certain wastes that are not amenable to the internal processing capabilities and must be disposed of appropriately. Disposal options for low-level radioactively contaminated wastes in Canada are limited primarily due to cost considerations. In recent years, Cameco has started to ship marginally contaminated wastes (<500 ppm uranium) to the United States for disposal in an appropriate landfill. The landfill is owned by US Ecology Incorporated and is located near Grand View, Idaho 70 miles southeast of Boise in the Owyhee Desert. The facility treats and disposes hazardous waste, non-hazardous industrial waste and low-activity radioactive material. The site

  1. Alternative Fuels Data Center: Propane Benefits

    Science.gov (United States)

    established infrastructure. Therefore, fueling vehicles with propane is one way to diversify U.S . transportation fuels and increase the nation's energy security in the process. Vehicle and Infrastructure Safety Administration, the National Fire Protection Association (Code 58), and state agencies like the

  2. Fuel assembly insertion system

    International Nuclear Information System (INIS)

    Barkhurst, D.J.

    1987-01-01

    This patent describes a nuclear reactor facility having fuel bundles: a system for the insertion of a fuel bundle into a position where vertically arranged fuel bundles surround and are adjacent the system comprising, in combination, separate and individual centering devices secured to and disposed on top of each fuel bundle adjacent the position. Each such centering device has a generally box-like cap configuration on the upper end of each fuel bundle and includes: a top wall; first and second side walls, each secured along and upper edge to the top wall; a rear plate attached along opposite vertical edges to the first and second side walls; a front inclined wall joined along an upper edge to the top to the wall and attached along opposite vertical edges first and second side walls; pad means secured to the lower edge of the first and second side walls, the front inclined wall and the rear plate for mounting each centering device on top of an associated fuel bundle; pin means carried by at least two of the pad means engageable with an associated aperature for locating and laterally fixing each centering device on top of its respective fuel bundle. Each front inclined wall of each of the centering devices is orientated on top of its respective fuel bundle to slope upwardly and away from the position where upon downward insertion of a fuel bundle any contact between the lower end of the fuel bundle inserted with a front inclined wall of a centering device will laterally deflect the fuel bundle. Each centering device further includes a central socket means secured to the top wall, and an elongated handling pole pivotally attached to the socket

  3. Web Services and Other Enhancements at the Northern California Earthquake Data Center

    Science.gov (United States)

    Neuhauser, D. S.; Zuzlewski, S.; Allen, R. M.

    2012-12-01

    The Northern California Earthquake Data Center (NCEDC) provides data archive and distribution services for seismological and geophysical data sets that encompass northern California. The NCEDC is enhancing its ability to deliver rapid information through Web Services. NCEDC Web Services use well-established web server and client protocols and REST software architecture to allow users to easily make queries using web browsers or simple program interfaces and to receive the requested data in real-time rather than through batch or email-based requests. Data are returned to the user in the appropriate format such as XML, RESP, or MiniSEED depending on the service, and are compatible with the equivalent IRIS DMC web services. The NCEDC is currently providing the following Web Services: (1) Station inventory and channel response information delivered in StationXML format, (2) Channel response information delivered in RESP format, (3) Time series availability delivered in text and XML formats, (4) Single channel and bulk data request delivered in MiniSEED format. The NCEDC is also developing a rich Earthquake Catalog Web Service to allow users to query earthquake catalogs based on selection parameters such as time, location or geographic region, magnitude, depth, azimuthal gap, and rms. It will return (in QuakeML format) user-specified results that can include simple earthquake parameters, as well as observations such as phase arrivals, codas, amplitudes, and computed parameters such as first motion mechanisms, moment tensors, and rupture length. The NCEDC will work with both IRIS and the International Federation of Digital Seismograph Networks (FDSN) to define a uniform set of web service specifications that can be implemented by multiple data centers to provide users with a common data interface across data centers. The NCEDC now hosts earthquake catalogs and waveforms from the US Department of Energy (DOE) Enhanced Geothermal Systems (EGS) monitoring networks. These

  4. 14 CFR 291.44 - BTS Schedule P-12(a), Fuel Consumption by Type of Service and Entity.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false BTS Schedule P-12(a), Fuel Consumption by... TRANSPORTATION Reporting Rules § 291.44 BTS Schedule P-12(a), Fuel Consumption by Type of Service and Entity. (a.... (e)(1) The cost of fuel shall include shrinkage, but excludes: (i) “Throughput” and “in to plane...

  5. Interconnection Structures, Management and Routing Challenges in Cloud-Service Data Center Networks: A Survey

    Directory of Open Access Journals (Sweden)

    Ahmad Nahar Quttoum

    2018-01-01

    Full Text Available Today’s data center networks employ expensive networking equipments in associated structures that were not designed to meet the increasing requirements of the current large-scale data center services. Limitations that vary between reliability, resource utilization, and high costs are challenging. The era of cloud computing represents a promise to enable large-scale data centers. Computing platforms of such cloud service data centers consist of large number of commodity low-price servers that, with a theme of virtualization on top, can meet the performance of the expensive high-level servers at only a fraction of the price. Recently, the research in data center networks started to evolve rapidly. This opened the path for addressing many of its design and management challenges, these like scalability, reliability, bandwidth capacities, virtual machines’ migration, and cost. Bandwidth resource fragmentation limits the network agility, and leads to low utilization rates, not only for the bandwidth resources, but also for the servers that run the applications. With Traffic Engineering methods, managers of such networks can adapt for rapid changes in the network traffic among their servers, this can help to provide better resource utilization and lower costs. The market is going through exciting changes, and the need to run demanding-scale services drives the work toward cloud networks. These networks that are enabled by the notation of autonomic management, and the availability of commodity low-price network equipments. This work provides the readers with a survey that presents the management challenges, design and operational constraints of the cloud-service data center networks

  6. Experience with respect to dose limitation in nuclear fuel service operations in the United Kingdom supporting civil nuclear power programmes

    International Nuclear Information System (INIS)

    Kennedy, J.W.

    1983-01-01

    Within the United Kingdom, the nuclear power generation programme is supported by nuclear fuel services including uranium enrichment, fuel fabrication and reprocessing, operated by British Nuclear Fuels Limited (BNFL). These have entailed the processing of large quantities of uranium and of plutonium and fission products arising in the course of irradiation of fuel in nuclear power stations and have necessitated substantial programmes for the radiological protection of the public and of the workers employed in the industry. This paper presents and reviews the statistics of doses recorded in the various sectors of nuclear fuel services operations against the background of the standards to which the industry is required to operate. A description is given of the development of BNFL policy in keeping with the objective of being recognized as among those industries regarded as safe and the resource implications of measures to reduce doses received by workers are reviewed in the light of experience. Finally, the paper reviews the epidemiological data which have been, and continue to be, collected for workers who have been employed in these nuclear fuel services. (author)

  7. Paying Personal Property Transportation Contracts at the Defense Finance and Accounting Service-Indianapolis Center

    National Research Council Canada - National Science Library

    Bridges, W

    1997-01-01

    ...; procuring those services using Federal Acquisition Regulation (FAR) contracts. It also plans to centralize the payment process at the Defense Finance and Accounting Service-Indianapolis Center (DFAS...

  8. Progress report of Cekmece Nuclear Research and Training Center for 1980

    International Nuclear Information System (INIS)

    1982-01-01

    Presented are the research works carried out in 1980 in Physics, Chemistry, Nuclear engineering, Radiobiology, Reactor operation and reactor enlargement, Health physics, Radioisotope production, Electronic, Industrial application of radioisotopes, Nuclear fuel technology, Technical services, Construction control, Publication and documentation, Training division of Cekmece Nuclear Research and Training Center

  9. Outsourcing of Defense Supply Center, Columbus, Bus and Taxi Service Operations

    National Research Council Canada - National Science Library

    Granetto, Paul

    1999-01-01

    Introduction. We performed the audit in response to allegations to the Defense Hotline that the Defense Supply Center, Columbus, outsourcing study for bus and taxi service operations was based on incorrect methodology...

  10. Comparative Study of Customer Satisfaction for Four Service Center by Using House of Quality (HoQ)

    International Nuclear Information System (INIS)

    Fazila Said; Mohammad Nasir Saluddin

    2012-01-01

    The comparative study between four service center was constructed from the development of House of Quality (HoQ). HoQ is a simple and attractive service innovation tool which can be used to directly show a comprehensive information which contained the voice of customer (VOC), technical response, technical correlation and matrix relationship. The indirect information is a report on technical and planning part which shows the comparison between four service center. This study revealed that the information from HoQ with further discussion on planning part which can be used to assist management in knowing the overall detail information of service center achievement and recognizes the solution for unsatisfied customer through priority improvement activity to enhance the customer satisfaction in future. (author)

  11. Satisfaction and Related Factors among the Service Users of Private Rehabilitation Centers

    Directory of Open Access Journals (Sweden)

    Shahrzad Pakjouei

    2014-12-01

    Full Text Available Objectives: The aim of present study was determining the level of satisfaction and its relative factors among parents of mentally retarded children using the services of private rehabilitation centers. Methods: This was a descriptive-analytical study that was conducted on parents of 150 mentally retarded children, who were selected by quota sampling from eight private rehabilitation centers in Tehran. Questionnaires were used to collect data, and correlation tests, independent t-test, and one-way analysis of variance were utilized to analyze data. Results: Upon the results, overall 88% of participants expressed their satisfaction. The major related factors were the behavior of managers and employees, receiving training for follow-up rehabilitation and education programs for the child at home, and the child's progress. The factors related to dissatisfaction included nutrition services, physical condition of the center and lack of parental participation in decision- making on matters related to the child. A significant relationship was found between parental satisfaction and family size, father's job, and the number of other disabled people in the family. Discussion: According to the findings, it seems that patient satisfaction is also affected by the behavioral aspects of care, in addition to the technical aspects. Considering the humans’ need for respect and compassion and the sense of being valuable, this finding could be anticipated. The managers of private rehabilitation centers, for attracting and retain clients, need to pay attention to the factors which have impact on service users’ satisfaction.

  12. Federal fees and contracts for storage and disposal of spent LWR fuel

    International Nuclear Information System (INIS)

    Clark, H.J.

    1979-01-01

    The methodology for establishing a fee for federal spent fuel storage and disposal services is explained along with a presentation of the cost centers and cost data used to calculate the fee. Results of the initial fee calculation and the attendant sensitivity studies are also reviewed. The current status of the fee update is presented. The content of the proposed contract for federal services is briefly reviewed

  13. Using the "customer service framework" to successfully implement patient- and family-centered care.

    Science.gov (United States)

    Rangachari, Pavani; Bhat, Anita; Seol, Yoon-Ho

    2011-01-01

    Despite the growing momentum toward patient- and family-centered care at the federal policy level, the organizational literature remains divided on its effectiveness, especially in regard to its key dimension of involving patients and families in treatment decisions and safety practices. Although some have argued for the universal adoption of patient involvement, others have questioned both the effectiveness and feasibility of patient involvement. In this article, we apply a well-established theoretical perspective, that is, the Service Quality Model (SQM) (also known as the "customer service framework") to the health care context, to reconcile the debate related to patient involvement. The application helps support the case for universal adoption of patient involvement and also question the arguments against it. A key contribution of the SQM lies in highlighting a set of fundamental service quality determinants emanating from basic consumer service needs. It also provides a simple framework for understanding how gaps between consumer expectations and management perceptions of those expectations can affect the gap between "expected" and "perceived" service quality from a consumer's perspective. Simultaneously, the SQM also outlines "management requirements" for the successful implementation of a customer service strategy. Applying the SQM to the health care context therefore, in addition to reconciling the debate on patient involvement, helps identify specific steps health care managers could take to successfully implement patient- and family-centered care. Correspondingly, the application also provides insights into strategies for the successful implementation of policy recommendations related to patient- and family-centered care in health care organizations.

  14. Elongated fuel road

    International Nuclear Information System (INIS)

    Williams, A.E.; Linkison, W.S.

    1977-01-01

    A fuel rod is proposed where a reorientation of the fuel in case of a considerable temperature increase, causing the melting of the densified fuel powder, will be avoided. For this purpose, in longitudinal direction of the fuel rod, a number of diameter reductions of the can are applied of certain distances. In the reduction zone the cross-sectional area of the fuel is reduced, as compared to the one of the remaining fuel material in the regions without diameter reduction, but not the density of the fuel. The recess is chosen to that in case of melting of the fuel in the center of the not contracted zone the fuel in the center of the narrowed area will remain solid and keep the molten material in position. (HR) [de

  15. Development of nuclear fuel cycle technologies

    International Nuclear Information System (INIS)

    Suzuoki, Akira; Matsumoto, Takashi; Suzuki, Kazumichi; Kawamura, Fumio

    1995-01-01

    In the long term plan for atomic energy that the Atomic Energy Commission decided the other day, the necessity of the technical development for establishing full scale fuel cycle for future was emphasized. Hitachi Ltd. has engaged in technical development and facility construction in the fields of uranium enrichment, MOX fuel fabrication, spent fuel reprocessing and so on. In uranium enrichment, it took part in the development of centrifuge process centering around Power Reactor and Nuclear Fuel Development Corporation (PNC), and took its share in the construction of the Rokkasho uranium enrichment plant of Japan Nuclear Fuel Service Co., Ltd. Also it cooperates with Laser Enrichment Technology Research Association. In Mox fuel fabrication, it took part in the construction of the facilities for Monju plutonium fuel production of PNC, for pellet production, fabrication and assembling processes. In spent fuel reprocessing, it cooperated with the technical development of maintenance and repair of Tokai reprocessing plant of PNC, and the construction of spent fuel stores in Rokkasho reprocessing plant is advanced. The centrifuge process and the atomic laser process of uranium enrichment are explained. The high reliability of spent fuel reprocessing plants and the advancement of spent fuel reprocessing process are reported. Hitachi Ltd. Intends to exert efforts for the technical development to establish nuclear fuel cycle which increases the importance hereafter. (K.I.)

  16. The quality of health care services provided in health care centers of Khorramabad using SERVQUAL model in 2010

    Directory of Open Access Journals (Sweden)

    mohammad javad tarrahi

    2012-06-01

    Conclusion: Expectations of the clients in all aspects of offering services are beyond than their perceptions, and needed to improve the quality of offering services in these centers in all the dimensions especially empathy dimension. It is recommended that the quality of the offering services be assessed periodically in these centers and intervene to improve the delivering of health services.

  17. Blended call center with idling times during the call service

    NARCIS (Netherlands)

    Legros, Benjamin; Jouini, Oualid; Koole, Ger

    We consider a blended call center with calls arriving over time and an infinitely backlogged amount of outbound jobs. Inbound calls have a non-preemptive priority over outbound jobs. The inbound call service is characterized by three successive stages where the second one is a break; i.e., there is

  18. Application of Suresight handheld auto-refractometer in refraction screening for infants in Community Health Service Center

    Directory of Open Access Journals (Sweden)

    Li-Hua Guo

    2014-08-01

    Full Text Available AIM: To observe the application of Suresight handheld auto-refractometer in measuring diopter of infants in Community Health Service Center. METHODS:Totally 836 cases(1 672 eyesfrom June 2013 to December 2013 were examined diopter of infants by Suresight handheld auto-refractometer in Community Health Service Center. RESULTS: Within 1 672 eyes of 836 infants were examined, 202 eyes were diagnosed ametropia, 38 eyes were suspicious, 240 eyes were transferred to the department of ophthalmology, the referral rate was 14.35%; 172 eyes were diagnosed ametropia, and the diagnosis rate of the referral patients was 71.67%. Among 172 eyes, 46 eyes were provided with corrected glasses, accounting for 2.75% of the number of screening, and 126 eyes were given intensive monitoring, accounting for 7.54% of the number of screening.CONCLUSION: Application of Suresight handheld auto-refractometer in refraction screening for infants in Community Health Service Center is convenient and effective. With two-way referral between community health service center and department of ophthalmology can monitor and intervene vision development of infants much earlier.

  19. DOSIMO - an interactive web service of the GSF Readout Center

    International Nuclear Information System (INIS)

    Huebner, S.; Lempart, R.

    2002-01-01

    Under the Radiation Protection and X-ray Ordinances, official personnel dosimetry centers are charged with measuring, documenting, and monitoring personnel doses as independent agencies. The GSF Readout Center (AWST) for Personnel Dosimeters and Area Monitors is responsible for monitoring persons occupationally exposed to radiation in the federal states of Baden-Wuerttemberg, Bavaria, Hesse, and Schleswig-Holstein. The largest German readout center uses new media in personnel dosimetry in order to simplify and speed up data transfer. In October 1998, AWST in cooperation with ADANAT ENTIRE SYSTEMS implemented an Internet interface. As a result, AWST is the first European readout center to offer not only a possibility to disseminate information through the Internet by means of the DOSIMO (DOSIMETRY On-line) Internet Service, but also enabling the interactive data exchange by electronic means with authorized customers. DOSIMO users enjoy the decisive advantage of having the results of readout of their dosimeters ready for use as soon as they have become available. (orig.) [de

  20. Truancy Assessment and Service Centers (TASC): Engaging Elementary School Children and Their Families

    Science.gov (United States)

    Rhodes, Judith L. F.; Thomas, Johanna M.; Lemieux, Catherine M.; Cain, Daphne S.; Guin, Cecile C.

    2010-01-01

    This article reviews literature describing truancy and its correlates, and it analyzes the current research on truancy prevention programs. Few truancy prevention programs exist in elementary school settings. This article describes Truancy Assessment and Service Centers, a theory-driven program providing case management services to children in 85…

  1. The Cost analysis of cervical cancer screening services provided by Damavand health center in 2013

    Directory of Open Access Journals (Sweden)

    Arezoo Chouhdari

    2015-03-01

    Full Text Available Background: Today, the health sector in many countries is facing with severe resource constraints; hence it is absolutely necessary that cost-benefit and cost-effectiveness assessment have a major role in design of health services. The purpose of this study was to evaluate the cost-benefit and effectiveness of cervical cancer screening service (Pap smear test done by the health centers in Damavand County in 2013.  Methods: This is a descriptive study with cross-sectional method. All data was extracted from existing documents in Damavand health network.Cost of service screening for doing Pap smear test (manpower costs of performing the service, the cost of transferring samples, water, electricity, telephone and gas was estimated in all health centers then results, were compared with the incomes of this service.  Results: Screening program coverage was 22.3%, 6.9% and 6.05% in 2011, 2012 and 2013 respectively. All costs and incomes of units performing Pap smear screening test were calculated. Entire costs and incomes of this service during 2013 were respectively 303,009,000 and 11,640,000 RLS equal $12,227 and $496.73. Therefore, the cost-benefit ratio of this screening test was approximately 0.040.  Conclusion: The costs of units performing cervical cancer screening test in Damavand Health Center were much more than this benefit and because of a none-positive Pap smear test in spite of high cost, performing this test in Damavand health centers was not cost effective.

  2. Experimental study of new generation WWER-1000 fuel assemblies at JSC NCCP

    International Nuclear Information System (INIS)

    Enin, A.; Rozhkov, V.; Sinikov, Y.; Ustimenko, A.; Shustov, M.

    2003-01-01

    An experimental program for the study of fuel assembly thermomechanical stability has been established together with RF SSC IPPE and Russian Scientific Center Kurchatov Institute. Assembly fragments and small dummy models of fuel assembly skeletons and fuel rod bundles have been used for the tests. The test results are used for the design selection, verification of the design codes and substantiation of operating capacity of fuel assemblies with a rigid skeleton. The mechanical characteristics of units make it possible to perform fuel assembly strength and rigidity calculations, including the cases of abnormal operation. The mechanical characteristics of the skeleton and fuel rod bundle dummy models make it possible to check for the adequacy of the fuel assembly design model. The mechanical characteristics obtained during fuel rods bundle push through experiments make it possible to substantiate the fuel assembly serviceability under the conditions of fuel rods bundle and skeleton interaction

  3. Startup of Torrey Pines Mark III and Puerto Rico Nuclear Center reactors with TRIGA-FLIP fuel

    Energy Technology Data Exchange (ETDEWEB)

    Chesworth, R. H. [Gulf E and ES, San Diego, CA (United States)

    1972-07-01

    This paper discusses the characteristics of TRIGA FLIP cores in two different geometries: the normal TRIGA single-rod geometry as typified by the installation in the Torrey Pines Mark III reactor; and the four-rod cluster geometry as typified by the conversion core installed in the Puerto Rico Nuclear Center reactor at Mayaguez. In both reactors the fuel is 8-1/2 wt % uranium, 70% enriched in U-235. The hydrogen to zirconium atom ratio is 1.5 to 1.65 and the cladding material is stainless steel. The basic neutronic characteristics of the fuel in both reactor installations are briefly discussed.

  4. Performance evaluation of data center service localization based on virtual resource migration in software defined elastic optical network.

    Science.gov (United States)

    Yang, Hui; Zhang, Jie; Ji, Yuefeng; Tan, Yuanlong; Lin, Yi; Han, Jianrui; Lee, Young

    2015-09-07

    Data center interconnection with elastic optical network is a promising scenario to meet the high burstiness and high-bandwidth requirements of data center services. In our previous work, we implemented cross stratum optimization of optical network and application stratums resources that allows to accommodate data center services. In view of this, this study extends the data center resources to user side to enhance the end-to-end quality of service. We propose a novel data center service localization (DCSL) architecture based on virtual resource migration in software defined elastic data center optical network. A migration evaluation scheme (MES) is introduced for DCSL based on the proposed architecture. The DCSL can enhance the responsiveness to the dynamic end-to-end data center demands, and effectively reduce the blocking probability to globally optimize optical network and application resources. The overall feasibility and efficiency of the proposed architecture are experimentally verified on the control plane of our OpenFlow-based enhanced SDN testbed. The performance of MES scheme under heavy traffic load scenario is also quantitatively evaluated based on DCSL architecture in terms of path blocking probability, provisioning latency and resource utilization, compared with other provisioning scheme.

  5. Defense Agency Travel Payments at Defense Finance and Accounting Service Indianapolis Center

    National Research Council Canada - National Science Library

    1997-01-01

    The audit objective was to assess the effectiveness of Defense Finance and Accounting Service Indianapolis Center management controls over payments to Defense agency personnel for temporary duty and local travel...

  6. Cost-Benefit Analysis of Radiation Therapy Services at Tripler Army Medical Center

    National Research Council Canada - National Science Library

    Diehl, Diane S

    2004-01-01

    The purpose of this analysis was to examine the costs and benefits associated with continuance of "in-house" radiation therapy services to eligible beneficiaries at Tripler Army Medical Center (TAMC...

  7. Trends in Mental Health and Substance Abuse Services at the Nation’s Community Health Centers: 1998–2003

    Science.gov (United States)

    Druss, Benjamin G.; Bornemann, Thomas; Fry-Johnson, Yvonne W.; McCombs, Harriet G.; Politzer, Robert M.; Rust, George

    2006-01-01

    Objective. We examined trends in delivery of mental health and substance abuse services at the nation’s community health centers. Methods. Analyses used data from the Health Resources and Services Administration (HRSA), Bureau of Primary Care’s (BPHC) 1998 and 2003 Uniform Data System, merged with county-level data. Results. Between 1998 and 2003, the number of patients diagnosed with a mental health/substance abuse disorder in community health centers increased from 210 000 to 800 000. There was an increase in the number of patients per specialty mental health/substance abuse treatment provider and a decline in the mean number of patient visits, from 7.3 visits per patient to 3.5 by 2003. Although most community health centers had some on-site mental health/substance abuse services, centers without on-site services were more likely to be located in counties with fewer mental health/substance abuse clinicians, psychiatric emergency rooms, and inpatient hospitals. Conclusions. Community health centers are playing an increasingly central role in providing mental health/substance abuse treatment services in the United States. It is critical both to ensure that these centers have adequate resources for providing mental health/substance abuse care and that they develop effective linkages with mental health/substance abuse clinicians in the communities they serve. PMID:17008573

  8. The Identifying, Evaluating and Prioritizing the Factors Affecting Customers’ Satisfaction with E-service Centers of Iran's Police

    Directory of Open Access Journals (Sweden)

    Seyed Ali Ziaee Azimi

    2016-11-01

    Full Text Available The present research is classified as an applied one employing a descriptive survey design to describe the status quo of the factors affecting customers’ satisfaction with the E-service centers of Iran’s police, known as 10 + police centers. The research population involves all the costumers of the 10+ police centers, among which 420 individuals were chosen through simple random sampling technique. Furthermore, 45 10 + police service centers were selected with probability proportional to size. After Determining the validity and reliability of the researcher-made questionnaire, it has been used to collect the required data. Then, a conceptual model was developed using the theoretical framework and background literature. After that, SPSS software was used to examine and make an analysis of the research hypothesises. The findings indicate that all the identified indices to the customers’ satisfaction with the 10 + police e- service centers (including trust and confidence, staff performance, system facility, environmental facility, basic amenity, providing sufficient notification, time and cost, easy access to the office have an effect on the customers’ satisfaction. In the end, some practical suggestions were made for an improvement in the satisfaction level of the customers to the 10 + police e- service centers.

  9. Fuel management service for Tarapur Atomic Power Station core thermal hydraulics

    International Nuclear Information System (INIS)

    Saha, D.; Venkat Raj, V.; Markandeya, S.G.

    1977-01-01

    Core thermal hydraulic analysis forms an integral part of the fuel management service for the Tarapur reactors. A distinguishing feature of boiling water reactors is the dependence of core flow distribution on the power distribution. Because of the changes in the axial and radial power distribution from cycle to cycle as well as during the cycle and also the variations in leakage flow, it is necessary to evaluate the core thermal hydraulic parameters for every cycle. Some of the typical results obtained in the course of analysis for different cycles of both the units at Tarapur are presented. The use of MCPR (Minimum Critical Power Ratio), instead of MCHFR (Minimum Critical Heat Flux Ratio) as a figure of merit for fuel cladding integrity is also discussed. (K.B.)

  10. NNDC Stand: Activities and Services of the National Nuclear Data Center

    International Nuclear Information System (INIS)

    Pritychenko, B.; Arcilla, R.; Burrows, T.W.; Dunford, C.L.; Herman, M.W.; McLane, V.; Oblozinsky, P.; Sonzogni, A.A.; Tuli, J.K.; Winchell, D.F.

    2005-01-01

    The National Nuclear Data Center (NNDC) collects, evaluates, and disseminates nuclear physics data for basic nuclear research, applied nuclear technologies including energy, shielding, medical and homeland security. In 2004, to answer the needs of nuclear data users community, NNDC completed a project to modernize data storage and management of its databases and began offering new nuclear data Web services. The principles of database and Web application development as well as related nuclear reaction and structure database services are briefly described

  11. Middle Tier Services Accessing the Chandra X-Ray Center Data Archive

    Science.gov (United States)

    Patz, A.; Harbo, P.; Moran, J.; van Stone, D.; Zografou, P.

    The Chandra Data Archive team at the Chandra X-ray Center has developed middle tier services that are used by both our search and retrieval applications to uniformly access our data repository. Accessible through an HTTP URL interface, these services can be called by our J2EE web application (WebChaser) and our Java Swing application (Chaser), as well as any other HTTP client. Programs can call the services to retrieve observation data such as a single FITS file, a proposal abstract or a detailed report of observation parameters. Having a central interface to the archive, shared by client applications, facilitates code reusability and easier maintenance. These middle tier services have been written in Java and packaged into a single J2EE application called the Search and Retrieval (SR) Services. The package consists of a web application front-end and an Enterprise Java Beans back-end. This paper describes the design and use of the SR Services.

  12. 78 FR 23312 - Uranium Enrichment Fuel Cycle Inspection Reports Regarding Louisiana Energy Services, National...

    Science.gov (United States)

    2013-04-18

    ... NUCLEAR REGULATORY COMMISSION [Docket No. 70-3103; NRC-2010-0264] Uranium Enrichment Fuel Cycle Inspection Reports Regarding Louisiana Energy Services, National Enrichment Facility, Eunice, New Mexico..., National Enrichment Facility in Eunice, New Mexico, and has authorized the introduction of uranium...

  13. Analysis of the Service Quality of Medical Centers Using Servqual Model (Case:Shaheed Rahnemoon Hospital

    Directory of Open Access Journals (Sweden)

    H Zare Ahmadabadi

    2007-07-01

    Full Text Available Introduction: Many organizations, especially service oriented ones, relative to their goals and mission, have a special view towards quality phenomena and its management. Methods: This paper analyzes medical service quality in one case; The internal section of Shaheed Rahnemoon Hospital Based on the basis of gap analysis model and Servqual technique. A questionnaire was designed and applied to measure expectations and perceptions of patients and personnel of the hospital. Results: On application of non-parametric statistical tests, we propose certain recommendations. These tests drive on five conceptual dimensions of service quality including intangibility, responsiveness, reliability, assurance and empathy. Results show that patients in this section were satisfied from the service provider’s responsiveness, but there are significant differences between expectations and perceptions in other dimensions. Conclusion: The service quality analysis models are useful for managers of medical centers to distinguish gaps between the two sides of service representation; patients and medical centers personnel. Ultimately, they can reinforce strengths and control weaknesses.

  14. Model of Emergency and Observation Nursing Services at the Community Health Center in East Java

    Directory of Open Access Journals (Sweden)

    Dwi Ananto Wibrata

    2017-07-01

    Full Text Available Public health centers as the spearhead of health services, also provide 'emergency and observation' nursing services, due to the high number of accidents in East Java. The purpose of this study was to develop the nurse's performance model in providing 'emergency and obeservation' nursing services at Puskesgadarsi ('Emergency and Observation' Community Health Center in East Java, using cross sectional design. The subjects of 120 nurses were selected by multi stage sampling technique. Data were collected through questionnaires and FGDs, and then analyzed using structural equation modeling to produce an model of ‘emergency and observation’ nursing service for nurses at Puskesgadarsi. Components of the model were reinforcing factors, personal factors, cognition factors, affection factors, commitment, interpersonal, reinforcement and nurse performance. Nurses can use this model in providing nursing services with due regard to their knowledge and skills, facilities and infrastructure, as well as interaction and self-reinforcement, so as to be able to perform nursing services 'emergency and observation' well.

  15. 76 FR 13618 - Delegation of Authority; Centers for Medicare & Medicaid Services

    Science.gov (United States)

    2011-03-14

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Office of the Secretary Delegation of Authority; Centers... Organization, Functions, and Delegations of Authority, last published at 55 FR 9363 (March 13, 1990). Part A... of Inspector General. This delegation of authority supersedes the authorities delegated under Part A...

  16. Fuel cell assembly unit for promoting fluid service and electrical conductivity

    Science.gov (United States)

    Jones, Daniel O.

    1999-01-01

    Fluid service and/or electrical conductivity for a fuel cell assembly is promoted. Open-faced flow channel(s) are formed in a flow field plate face, and extend in the flow field plate face between entry and exit fluid manifolds. A resilient gas diffusion layer is located between the flow field plate face and a membrane electrode assembly, fluidly serviced with the open-faced flow channel(s). The resilient gas diffusion layer is restrained against entering the open-faced flow channel(s) under a compressive force applied to the fuel cell assembly. In particular, a first side of a support member abuts the flow field plate face, and a second side of the support member abuts the resilient gas diffusion layer. The support member is formed with a plurality of openings extending between the first and second sides of the support member. In addition, a clamping pressure is maintained for an interface between the resilient gas diffusion layer and a portion of the membrane electrode assembly. Preferably, the support member is spikeless and/or substantially flat. Further, the support member is formed with an electrical path for conducting current between the resilient gas diffusion layer and position(s) on the flow field plate face.

  17. Test and approval center for fuel cell and hydrogen technologies: Phase I. Initiation. Final report; Test- og godkendelsescenter for braendselscelle- og brintteknologier. Fase 1. Opstart. Slutrapport

    Energy Technology Data Exchange (ETDEWEB)

    Hagen, A. [Technical Univ. of Denmark. DTU Energy Conversion, DTU Risoe Campus, Roskilde (Denmark)

    2012-09-15

    The aim of the present project was to initialize a Test and Approval Center for Fuel Cell and Hydrogen Technologies at the sites of the project partners Risoe DTU (Fuel Cells and Solid State Chemistry Division), and DGC (work package 1). The project furthermore included start-up of first activities with focus on the development of accelerated life-time tests of fuel cell systems, preparations for standardization of these methods, and advising in relation to certification and approval of fuel cell systems (work package 2). The main achievements of the project were: Work package 1: 1) A large national and international network was established comprising of important commercial players, research institutions, and other test centers; 2) The test center is known in large part of the international Fuel Cell and Hydrogen community due to substantial efforts in 'marketing'; 3) New national and international projects have been successfully applied for, with significant roles of the test center, which secure the further establishment and development of the center. Work package 2: 1) Testing equipment was installed and commissioned at DTU (Risoe Campus); 2) A comprehensive survey among international players regarding activities on accelerated SOFC testing was carried out; 3) A test procedure for 'compressed' testing of SOFC in relation to {mu} CHP application was developed and used for one-cell stack and 50-cell-stack testing; 4) Guidelines for Danish authority handling were formulated. (Author)

  18. An enhanced model for minimizing fuel consumption under block-queuing in a drive-through service system

    Energy Technology Data Exchange (ETDEWEB)

    Reilly, C.H.; Berglin, J. [University of Central Florida, Orlando, FL (United States). Dept. of Industrial Engineering and Management Systems

    2004-05-01

    We present a new model for determining the optimal block-size under block-queuing in a simple, single-channel queue at a drive-through service facility. With block-queuing, a queue is partitioned into an active section and a passive section, where drivers are asked to turn off their engines until the active section clears. Our model prescribes a block-size, i.e., a maximum number of vehicles in the active section, which minimizes the expected amount of fuel consumed in the queue. It can assess the effects of the traffic intensity, the service-time variance, and the proportion of compliant drivers in the passive section on the optimal block- size and on fuel consumption in the queue. (author)

  19. NOAA Coastal Services Center Coastal Inundation Digital Elevation Model: Philadelphia WFO - Pennsylvania

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This digital elevation model (DEM) is a part of a series of DEMs produced for the National Oceanic and Atmospheric Administration Coastal Services Center's Sea Level...

  20. Supercomputing Centers and Electricity Service Providers

    DEFF Research Database (Denmark)

    Patki, Tapasya; Bates, Natalie; Ghatikar, Girish

    2016-01-01

    from a detailed, quantitative survey-based analysis and compare the perspectives of the European grid and SCs to the ones of the United States (US). We then show that contrary to the expectation, SCs in the US are more open toward cooperating and developing demand-management strategies with their ESPs......Supercomputing Centers (SCs) have high and variable power demands, which increase the challenges of the Electricity Service Providers (ESPs) with regards to efficient electricity distribution and reliable grid operation. High penetration of renewable energy generation further exacerbates...... this problem. In order to develop a symbiotic relationship between the SCs and their ESPs and to support effective power management at all levels, it is critical to understand and analyze how the existing relationships were formed and how these are expected to evolve. In this paper, we first present results...

  1. Current status of PIE activities in O-arai Engineering Center of JNC on FBR MOX fuel

    International Nuclear Information System (INIS)

    Koyama, Shin-ichi; Osaka, Masahiko; Namekawa, Takashi; Itoh, Masahiko

    2003-01-01

    Japan Nuclear Cycle Development Institute (JNC) is now totally promoting the development of commercialized fast reactors to realize stable supply of energy in future. One of the important items is to develop high-performance fuel. For this purpose, it is essential to carry out post-irradiation examinations (PIE) for evaluation of irradiated fuel performance and also to establish the PIE technology. This paper describes the current status of PIE results including its technology in O-arai Engineering Center of JNC. The facilities have been operating safely and successfully since the 1960's. Obtained PIE data were reflected to the design and operation of the experimental fast reactor JOYO, the prototype fast reactor MONJU and future fast reactors. The core modification from the breeding core (MK-I) to the irradiation core (MK-II) of JOYO was performed in 1982. Irradiation tests of fuels and materials in MK-II core started in 1982. At PIE facilities in OEC, 65 of driver fuels, fuel irradiation test rigs, material irradiation test rigs and several other components were examined related to JOYO MK-II core operation, and thus a lot of aspects were accumulated for irradiated fuel behaviors. As topical activities of these PIE techniques, burnup measurement and analytical technique for Minor Actinides (MA), such as neptunium and americium were described here. (author)

  2. Fuel cell-based cogeneration system covering data centers’ energy needs

    International Nuclear Information System (INIS)

    Guizzi, Giuseppe Leo; Manno, Michele

    2012-01-01

    The Information and Communication Technology industry has gone in the recent years through a dramatic expansion, driven by many new online (local and remote) applications and services. Such growth has obviously triggered an equally remarkable growth in energy consumption by data centers, which require huge amounts of power not only for IT devices, but also for power distribution units and for air-conditioning systems needed to cool the IT equipment. This paper is dedicated to the economic and energy performance assessment of a cogeneration system based on a natural gas membrane steam reformer producing a pure hydrogen flow for electric power generation in a polymer electrolyte membrane fuel cell. Heat is recovered from both the reforming unit and the fuel cell in order to supply the needs of an office building located near the data center. In this case, the cooling energy needs of the data center are covered by means of a vapor-compression chiller equipped with a free-cooling unit. Since the fuel cell’s output is direct current rather than alternate current, the possibility of further improving data centers’ energy efficiency adopting DC-powered data center equipment is also discussed. -- Highlights: ► Data centers' energy needs are discussed and possible savings from advanced energy management techniques are estimated. ► The thermal energy requirements of an office building close to the data center are added to the energy scenario. ► Significant energy and cost savings can be obtained by means of free-cooling, high-voltage direct current, and a cogeneration facility. ► The cogeneration system is based on a natural gas membrane reformer and a PEM fuel cell. ► Energy flows in the membrane reformer are analyzed and an optimal value of steam-to-carbon ratio is found in order to minimize the required membrane area.

  3. Fuel buyers guide: company data

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    Four major listings relating to nuclear fuel services are provided. 1. A fuel buyer's guide listing companies under alphabetical order of country and giving addresses and an indication of the services offered. 2. A fuel buyers guide classifying companies in alphabetical order of the services offered. 3. A fuel and front end facility listing subdivided into companies involved in: uranium ore processing; uranium refining and conversion; enrichment; fuel fabrication; heavy water production; zirconium metal production; and zirconium tube production. 4. A fuel and front end facilities listing giving operators' addresses under alphabetical order of country. (UK)

  4. Enusa, Internationalized Enterprise in Nuclear Fuel Manufacture and Associated Engineering Services

    International Nuclear Information System (INIS)

    Garcia-Calderon, G.

    2000-01-01

    Since the beginning of its activities, in 1972, ENUSA has been providing an important contribution to Spanish nuclear energy development, performing activities in the first part of the nuclear fuel cycle. Few years after starting the production at the juzbado manufacturing plant, ENUSA realised that, in order to be competitive, needed to expand its activities beyond the Spanish border and took the decision of being present in the Nuclear fuel market in Europe internationalizing its activities. ENUSA reached Strategic Alliance with of the most important technology owners, General Electric and Westinghouse. These alliances have allowed the Company to be one of the players in the very competitive European fuel market, and have also been, important to position ENUSA in an industry in process of consolidation. In parallel to these activities, ENUSA has been present in different international R and D projects, being member of the NFIR of EPRI and Halden projects, and promoting other international R and D programs with companies from USA, Japan, etc. This R and D efforts, together with those Alliance, will allow ENUSA to have an advanced product in this new deregulated market, creating value to the service of our customers. (Author)

  5. Long term assurance of supply of back end of fuel cycle facilities and services

    International Nuclear Information System (INIS)

    1978-01-01

    The paper deals with the long-term assurance of supply of the back end of fuel cycle facilities and services. 11 fundamental questions are posed and commented on by representatives of 7 countries. Non-proliferation aspects are not considered as they will be discussed elsewhere

  6. Fuel Lubricity Impact on Shipboard Engine and Fuel Systems and Sensitivity of U.S. Navy Diesel Engines to Low-Sulfur Diesel Fuel

    Science.gov (United States)

    2011-06-30

    load fuel and operated with a dummy injector to make sure the system was clean. The rig was de -fueled and a fresh charge of 2000-gram fuel was added...the rocker arm on the injector. The rocker arm contact was repositioned when it was noted it was hitting the injector off-center, and it was felt...going up. Figure B6. DD 149 Unit Injector with Diesel Fuel and Centered Rocker Arm Figure B7. Wear Rate Deviation Attributed to Head

  7. FAA Center of Excellence for Alternative Jet Fuels & Environment : Annual Technical Report : December, 2016 : For the period September 13, 2013 - September 30, 2015

    Science.gov (United States)

    2015-12-01

    This report covers the period between the initial establishment of the FAA Center of Excellence for Alternative Jet Fuels and Environment on September 13, 2013 through September 30, 2015. The Center was established by the authority of FAA solicitatio...

  8. Strengthening Climate Services Capabilities and Regional Engagement at NOAA's National Climatic Data Center

    Science.gov (United States)

    Shea, E.

    2008-12-01

    The demand for sector-based climate information is rapidly expanding. In order to support this demand, it is crucial that climate information is managed in an effective, efficient, and user-conscious manner. NOAA's National Climatic Data Center is working closely with numerous partners to develop a comprehensive interface that is authoritative, accessible, and responsive to a variety of sectors, stakeholders, and other users. This talk will explore these dynamics and activities, with additional perspectives on climate services derived from the regional and global experiences of the NOAA Integrated Data and Environmental Applications (IDEA) Center in the Pacific. The author will explore the importance of engaging partners and customers in the development, implementation and emergence of a national climate service program. The presentation will draw on the author's experience in climate science and risk management programs in the Pacific, development of regional and national climate services programs and insights emerging from climate services development efforts in NCDC. In this context, the author will briefly discuss some of guiding principles for effective climate services and applications including: - Early and continuous dialogue, partnership and collaboration with users/customers; - Establishing and sustaining trust and credibility through a program of shared learning and joint problem- solving; - Understanding the societal context for climate risk management and using a problem-focused approach to the development of products and services; - Addressing information needs along a continuum of timescales from extreme events to long-term change; and - Embedding education, outreach and communications activities as critical program elements in effective climate services. By way of examples, the author will reference lessons learned from: early Pacific Island climate forecast applications and climate assessment activities; the implementation of the Pacific Climate

  9. Pathways to Healing: Person-centered Responses to Complementary Services

    Science.gov (United States)

    Bertrand, Sharon W.; Fermon, Barbara; Coleman, Julie Foley

    2014-01-01

    Objectives: This research study assessed perceived changes in quality-of-life measures related to participation in complementary services consisting of a variety of nontraditional therapies and/or programs at Pathways: A Health Crisis Resource Center in Minneapolis, Minnesota. Design: Survey data were used to assess perceived changes participants ascribed to their experience with complementary services at Pathways. Quantitative data analysis was conducted using participant demographics together with participant ratings of items from the “Self-Assessment of Change” (SAC) measure developed at the University of Arizona, Tucson. Qualitative data analysis was conducted on written responses to an additional survey question: “To what extent has your participation at Pathways influenced your healing process?” Setting/Location: Pathways offers a variety of services, including one-to-one sessions using nontraditional healing therapies, support groups, educational classes, and practice groups such as yoga and meditation for those facing serious health challenges. These services are offered free of charge through community financial support using volunteer practitioners. Participants: People (126) diagnosed with serious health challenges who used Pathways services from 2007 through 2009. Interventions: Participation in self-selected Pathways services. Measures: Responses to items on the SAC measure plus written responses to the question, “To what extent has your participation at Pathways influenced your healing process?” Results: Quantitative findings: Participants reported experiencing significant changes across all components of the SAC measure. Qualitative findings: Responses to the open-ended survey question identified perspectives on the culture of Pathways and a shift in participants' perceptions of well-being based on their experience of Pathways services. Conclusions: Participation in services provided by the Pathways organization improved perceptions of

  10. Service line structure and decision-maker attention in three health systems: Implications for patient-centered care.

    Science.gov (United States)

    Louis, Christopher J; Clark, Jonathan R; Gray, Barbara; Brannon, Diane; Parker, Victoria

    2017-06-15

    Scholars have noted a disconnect between the level at which structure is typically examined (the organization) and the level at which the relevant coordination takes place (service delivery). Accordingly, our understanding of the role structure plays in care coordination is limited. In this article, we explore service line structure, with an aim of advancing our understanding of the role service line structure plays in producing coordinated, patient-centered care. We do so by giving special attention to the cognitive roots of patient-centeredness. Our exploratory study relied on comparative case studies of the breast cancer service lines in three health systems. Nonprobability discriminative snowball sampling was used to identify the final sample of key informants. We employed a grounded approach to analyzing and interpreting the data. We found substantial variation across the three service lines in terms of their structure. We also found corresponding variation across the three case sites in terms of where informant attention was primarily focused in the process of coordinating care. Drawing on the attention-based view of the firm, our results draw a clear connection between structural characteristics and the dominant focus of attention (operational tactics, provider roles and relationships, or patient needs and engagement) in health care service lines. Our exploratory results suggest that service line structures influence attention in two ways: (a) by regulating the type and intensity of the problems facing service line participants and (b) by encouraging (or discouraging) a shared purpose around patient needs. Patient-centered attention-a precursor to coordinated, patient-centered care-depends on the internal choices organizations make around service line structure. Moreover, a key task for organizational and service line leaders is to structure service lines to create a context that minimizes distractions and enables care providers to focus their attention on

  11. Inspection and Analysis of Aluminum Storage Racks in Spent Fuel Storage Basins

    International Nuclear Information System (INIS)

    Howell, J.P.; Nelson, D.Z.

    1998-07-01

    Aluminum-clad spent nuclear fuel is stored in water filled basins at the Savannah River Site awaiting processing or other disposition. After more than 35 years of service underwater, the aluminum storage racks that position the fuel bundles in the basin were replaced. During the removal of the racks from the basin, a failure occurred in one of the racks and the Savannah River Technology Center was asked to investigate. This paper presents results of the failure analysis and provides a discussion of the effects of corrosion on the structural integrity of the storage racks

  12. Alternative Fuel Guidelines for Alternative Transportation Systems.

    Science.gov (United States)

    2011-01-31

    The Volpe Center documented the increased use of alternative fuels on vehicles owned and operated by federal land management agencies. For each alternative fuel type, the Volpe Center documented the availability of vehicles, fueling mechanisms and pr...

  13. Estimates of future demand for uranium and nuclear fuel cycle services

    Energy Technology Data Exchange (ETDEWEB)

    Krymm, R; Woite, G [International Atomic Energy Agency, Division of Nuclear Power and Reactors, Economic Studies Section, Vienna (Austria)

    1976-07-01

    As a review of forecasts made over the last few years amply demonstrates, projections of nuclear power capacity on a country, regional or world basis are subject to uncertainties. It summarizes the evolution of estimates made in the recent past, should provide a sobering reminder of the advisability of relying on ranges rather than on single figures. Although they are derived from a relatively narrow range of assumptions for nuclear power capacity, the alternative estimates of demands for uranium and nuclear-fuel-cycle services differ by about 50%. If plausible variations in breeder penetration, load factors, tails assays and fuel performance were taken into account, a ratio of 2 between maximum and minimum possible demands for the 2000 could easily be approached. Thus, for instance, a 15% (instead of 5%) breeder penetration by the year 2000 would decrease annual natural uranium demand by about 10%, a drop of load factor from 0.7 to 0.6 would drop the demand by another 10%, a decrease in tail assay from 0.25% to 0.2% would drop the demand by 8%. These momentous uncertainties, characteristic of medium- and long-term demand projections, offer a sharp contrast to the inflexibility of short-term requirements. Once a nuclear plant is ordered, the demand for the fuel services required for its core and for its replacement loadings is practically fixed (subject to minor trade-offs) and it can only be delayed in time by accepting exceedingly heavy additional costs. The demand for uranium can be characterized as being uncertain in the future and inelastic in the present. It faces sources of supply which, with the exception of fabrication and conversion facilities, are characterized by long planning times, lengthy prospecting and construction times, and above all by heavy capital investments. This combination offers an almost ideal framework for instability and wild price fluctuations if consumers and suppliers operate independently seeking temporary guidance in their

  14. Estimates of future demand for uranium and nuclear fuel cycle services

    International Nuclear Information System (INIS)

    Krymm, R.; Woite, G.

    1976-01-01

    As a review of forecasts made over the last few years amply demonstrates, projections of nuclear power capacity on a country, regional or world basis are subject to uncertainties. It summarizes the evolution of estimates made in the recent past, should provide a sobering reminder of the advisability of relying on ranges rather than on single figures. Although they are derived from a relatively narrow range of assumptions for nuclear power capacity, the alternative estimates of demands for uranium and nuclear-fuel-cycle services differ by about 50%. If plausible variations in breeder penetration, load factors, tails assays and fuel performance were taken into account, a ratio of 2 between maximum and minimum possible demands for the 2000 could easily be approached. Thus, for instance, a 15% (instead of 5%) breeder penetration by the year 2000 would decrease annual natural uranium demand by about 10%, a drop of load factor from 0.7 to 0.6 would drop the demand by another 10%, a decrease in tail assay from 0.25% to 0.2% would drop the demand by 8%. These momentous uncertainties, characteristic of medium- and long-term demand projections, offer a sharp contrast to the inflexibility of short-term requirements. Once a nuclear plant is ordered, the demand for the fuel services required for its core and for its replacement loadings is practically fixed (subject to minor trade-offs) and it can only be delayed in time by accepting exceedingly heavy additional costs. The demand for uranium can be characterized as being uncertain in the future and inelastic in the present. It faces sources of supply which, with the exception of fabrication and conversion facilities, are characterized by long planning times, lengthy prospecting and construction times, and above all by heavy capital investments. This combination offers an almost ideal framework for instability and wild price fluctuations if consumers and suppliers operate independently seeking temporary guidance in their

  15. Alternative Fuels Data Center: Publications

    Science.gov (United States)

    refueling infrastructure. Waste-to-Fuel: A Case Study of Converting Food Waste to Renewable Natural Gas as a 5,300 PEVs on the road by the end of 2019. This analysis finds that while consumer demand for fast vehicles), a minimum level of fast charging coverage across the city is required to ease consumer range

  16. Shared services centers and work sustainability: which contributions from ergonomics?

    Science.gov (United States)

    Arnoud, Justine; Falzon, Pierre

    2012-01-01

    This study examines the way in which Shared Services Centers (SSCs) were implemented in a French multinational company. It aims to characterize the change according to the capabilities model developed by Amartya Sen: what are the effects of SSCs in terms of capabilities development and developmental quality of work, i.e. in the enabling potential of work? A 3-step methodology has been used: first, an investigation was conducted in a pay service of a local entity moving into SSC in 2013; second, two investigations were conducted in another pay service of a SSC: first, a few months after the change, and then, one year after the change (the same operators were interviewed). Results show a tendency to the decrease of the enabling potential. Additionally, it was noted that administrators are kept away from the design process and have to struggle with inappropriate rules. The efficiency and sustainability of the SSC are questioned; in this context, the human factor specialist has an important role to play.

  17. 42 CFR 405.2462 - Payment for rural health clinic and Federally qualified health center services.

    Science.gov (United States)

    2010-10-01

    ... integral and subordinate part of a hospital, skilled nursing facility or home health agency participating... 42 Public Health 2 2010-10-01 2010-10-01 false Payment for rural health clinic and Federally qualified health center services. 405.2462 Section 405.2462 Public Health CENTERS FOR MEDICARE & MEDICAID...

  18. Service-Learning. National Dropout Prevention Center/Network Newsletter. Volume 22, Number 4

    Science.gov (United States)

    Duckenfield, Marty, Ed.

    2011-01-01

    The "National Dropout Prevention Newsletter" is published quarterly by the National Dropout Prevention Center/Network. This issue contains the following articles: (1) Dropouts and Democracy (Robert Shumer); (2) 2011 NDPN Crystal Star Winners; (3) Service-Learning as Dropout Intervention and More (Michael VanKeulen); and (4) Teacher…

  19. National Space Science Data Center and World Data Center A for Rockets and Satellites - Ionospheric data holdings and services

    Science.gov (United States)

    Bilitza, D.; King, J. H.

    1988-01-01

    The activities and services of the National Space Science data Center (NSSDC) and the World Data Center A for Rockets and Satellites (WDC-A-R and S) are described with special emphasis on ionospheric physics. The present catalog/archive system is explained and future developments are indicated. In addition to the basic data acquisition, archiving, and dissemination functions, ongoing activities include the Central Online Data Directory (CODD), the Coordinated Data Analysis Workshopps (CDAW), the Space Physics Analysis Network (SPAN), advanced data management systems (CD/DIS, NCDS, PLDS), and publication of the NSSDC News, the SPACEWARN Bulletin, and several NSSD reports.

  20. Introduction to Recreation Services for People with Disabilities: A Person-Centered Approach. 3rd Edition

    Science.gov (United States)

    Bullock, Charles C.; Mahon, Michael J.; Killingsworth, Charles L.

    2010-01-01

    Ultimately, all successful recreation programs center around its participants wants and needs. Serving people with disabilities is no exception. "Introduction to Recreation Services for People with Disabilities" is intended to be an introductory book for anyone planning or working in the parks, recreation, and leisure service industry. Through…

  1. Coupling fuel cycles with repositories: how repository institutional choices may impact fuel cycle design

    International Nuclear Information System (INIS)

    Forsberg, C.; Miller, W.F.

    2013-01-01

    The historical repository siting strategy in the United States has been a top-down approach driven by federal government decision making but it has been a failure. This policy has led to dispatching fuel cycle facilities in different states. The U.S. government is now considering an alternative repository siting strategy based on voluntary agreements with state governments. If that occurs, state governments become key decision makers. They have different priorities. Those priorities may change the characteristics of the repository and the fuel cycle. State government priorities, when considering hosting a repository, are safety, financial incentives and jobs. It follows that states will demand that a repository be the center of the back end of the fuel cycle as a condition of hosting it. For example, states will push for collocation of transportation services, safeguards training, and navy/private SNF (Spent Nuclear Fuel) inspection at the repository site. Such activities would more than double local employment relative to what was planned for the Yucca Mountain-type repository. States may demand (1) the right to take future title of the SNF so if recycle became economic the reprocessing plant would be built at the repository site and (2) the right of a certain fraction of the repository capacity for foreign SNF. That would open the future option of leasing of fuel to foreign utilities with disposal of the SNF in the repository but with the state-government condition that the front-end fuel-cycle enrichment and fuel fabrication facilities be located in that state

  2. Alternative Fuels Data Center: Indiana Transportation Data for Alternative

    Science.gov (United States)

    (nameplate, MW) 1,430 Source: BioFuels Atlas from the National Renewable Energy Laboratory Case Studies Video Alternative Fuels Save Money in Indy April 1, 2012 More Case Studies Videos Text Version More Indiana Videos on YouTube Video thumbnail for Indiana Beverage Company Invests in Alternative Fuels Indiana Beverage

  3. Student Services/One Stop Centers: A Qualitative Examination of Implementation at Three Post-Secondary Institutions

    Science.gov (United States)

    Becker, Janine M.

    2012-01-01

    This research investigates Student Services/One Stop Centers at three post-secondary institutions, looking at the origination of the centers and success through the lens of behavioral theories. Comparing the 3-stage Group Dynamics Theory of Lewin (1947), Social Learning Theory of Bandura (1977), and the 8-stage Change Management Model of Kotter…

  4. 38 CFR 13.55 - Veterans Service Center Manager to select and appoint or recommend for appointment the person or...

    Science.gov (United States)

    2010-07-01

    ... Manager to select and appoint or recommend for appointment the person or legal entity to receive....55 Veterans Service Center Manager to select and appoint or recommend for appointment the person or.... The Veterans Service Center Manager is authorized to select and appoint (or in the case of a court...

  5. Alternative Fuels Data Center: Washington Transportation Data for

    Science.gov (United States)

    stations in Washington with alternative fuels Fuel Public Private Biodiesel (B20 and above) 8 33 Compressed Partnerships Spark Biodiesel Success for Essential Baking Company Partnerships Spark Biodiesel Success for Videos on YouTube Video thumbnail for Seattle Bakery Delivers With Biodiesel Trucks Seattle Bakery

  6. Spatial Data Services for Interdisciplinary Applications from the NASA Socioeconomic Data and Applications Center

    Science.gov (United States)

    Chen, R. S.; MacManus, K.; Vinay, S.; Yetman, G.

    2016-12-01

    The Socioeconomic Data and Applications Center (SEDAC), one of 12 Distributed Active Archive Centers (DAACs) in the NASA Earth Observing System Data and Information System (EOSDIS), has developed a variety of operational spatial data services aimed at providing online access, visualization, and analytic functions for geospatial socioeconomic and environmental data. These services include: open web services that implement Open Geospatial Consortium (OGC) specifications such as Web Map Service (WMS), Web Feature Service (WFS), and Web Coverage Service (WCS); spatial query services that support Web Processing Service (WPS) and Representation State Transfer (REST); and web map clients and a mobile app that utilize SEDAC and other open web services. These services may be accessed from a variety of external map clients and visualization tools such as NASA's WorldView, NOAA's Climate Explorer, and ArcGIS Online. More than 200 data layers related to population, settlements, infrastructure, agriculture, environmental pollution, land use, health, hazards, climate change and other aspects of sustainable development are available through WMS, WFS, and/or WCS. Version 2 of the SEDAC Population Estimation Service (PES) supports spatial queries through WPS and REST in the form of a user-defined polygon or circle. The PES returns an estimate of the population residing in the defined area for a specific year (2000, 2005, 2010, 2015, or 2020) based on SEDAC's Gridded Population of the World version 4 (GPWv4) dataset, together with measures of accuracy. The SEDAC Hazards Mapper and the recently released HazPop iOS mobile app enable users to easily submit spatial queries to the PES and see the results. SEDAC has developed an operational virtualized backend infrastructure to manage these services and support their continual improvement as standards change, new data and services become available, and user needs evolve. An ongoing challenge is to improve the reliability and performance

  7. Alternative Fuels Data Center: Alabama Transportation Data for Alternative

    Science.gov (United States)

    Public Private Biodiesel (B20 and above) 2 8 Compressed Natural Gas (CNG) 10 23 Electric 84 67 Ethanol Boasts 200-Plus Flex Fuel Vehicles May 24, 2013 Video thumbnail for Biodiesel Fuels Education in Alabama Biodiesel Fuels Education in Alabama May 1, 2012 More Case Studies Videos Text Version More Alabama Videos

  8. Alternative Fuels Data Center: Maine Transportation Data for Alternative

    Science.gov (United States)

    Biodiesel-Blended Diesel Documentation Requirement Data Download Fueling Stations 149 stations in Maine with alternative fuels Fuel Public Private Biodiesel (B20 and above) 2 1 Compressed Natural Gas (CNG) 0 2 Electric ://www.youtube.com/embed/jHftlruFR40 Video thumbnail for Maine's Only Biodiesel Manufacturer Powers Fleets in the

  9. PERCEPTION OF PATIENTS ON ART ABOUT THE SERVICES AVAILED AT LINK ART CENTERS IN SELECTED STATES OF INDIA

    Directory of Open Access Journals (Sweden)

    Ruchi Sogarwal

    2012-07-01

    Full Text Available Objectives: The present study was attempted to assess the perception of patients on ART about the services availed at Link ART Centers (LAC in selected states of India. Methods: A total of 354 PLHAs were selected from 20 systematic randomly selected LACs from Gujarat, Maharashtra, Rajasthan and Uttar Pradesh. Results: Study reveals that majority (97% of the patients seeking services from LACs made regular visits to the center. It was found that 57 percent of the patients had spent less than 100 rupees during the last visit. More than 95 percent of the clients reported waiting time less than 30 minutes for availing counseling and collection of drugs at LACs. The mean±SD score of patient’s level of satisfaction with the services availed at LACs is 4.7±0.5. Conclusions: Study concludes that while majority of the patients were satisfied with the services at LACs, there is need of strengthening the existing ‘package’ of services in these centers and expand the network across the country.

  10. PERCEPTION OF PATIENTS ON ART ABOUT THE SERVICES AVAILED AT LINK ART CENTERS IN SELECTED STATES OF INDIA

    Directory of Open Access Journals (Sweden)

    Ruchi Sogarwal

    2012-06-01

    Full Text Available Objectives: The present study was attempted to assess the perception of patients on ART about the services availed at Link ART Centers (LAC in selected states of India. Methods: A total of 354 PLHAs were selected from 20 systematic randomly selected LACs from Gujarat, Maharashtra, Rajasthan and Uttar Pradesh. Results: Study reveals that majority (97% of the patients seeking services from LACs made regular visits to the center. It was found that 57 percent of the patients had spent less than 100 rupees during the last visit. More than 95 percent of the clients reported waiting time less than 30 minutes for availing counseling and collection of drugs at LACs. The mean±SD score of patient’s level of satisfaction with the services availed at LACs is 4.7±0.5. Conclusions: Study concludes that while majority of the patients were satisfied with the services at LACs, there is need of strengthening the existing ‘package’ of services in these centers and expand the network across the country.

  11. Failure Analysis of a Helicopter External Fuel-Tank Pylon

    Science.gov (United States)

    Newman, John A.; Piascik, Robert S.; Lindenberg, Richard A.

    2002-01-01

    An eight-inch-long (0.2 m) crack was found in an external fuel-tank pylon of a U.S. Coast Guard HH-60 helicopter. The damaged pylon was removed from service and destructively examined at NASA Langley Research Center (LaRC) to determine the cause of the crack. Results of the analysis revealed that crack initiation occurred at corrosion pits in a fastener hole and crack propagation was a result of cyclic loading.

  12. Health-hazard evaluation report HETA-86-381-1934, Nuclear Fuel Services, Erwin, Tennessee

    International Nuclear Information System (INIS)

    Thun, M.J.; Schober, S.

    1988-10-01

    In response to a request from the U.S. Nuclear Regulatory Commission, a study was made of excessive kidney disease at Nuclear Fuel Services, Erwin, Tennessee. This facility was the sole producer of nuclear fuel rods for the United States Navy. The major operations involved the production of highly enriched uranium fuel for naval nuclear reactors and the recovery from scrap of low enriched uranium for commercial light water reactors. Highly enriched uranium-hexafluoride was converted to oxides and ultimately into finished nuclear fuel. A medical questionnaire revealed more frequent kidney stones (19%) and urinary tract infections (28%) among the workers than among the guards used as a comparison group, 7 and 12%, respectively. Dairy farmers from a nearby town used as an additional comparison group reported kidney stones more frequently (26 versus 21%) and infections less frequently (20 versus 30%) than the current and former senior workers at the nuclear facility. Kidney function was similar in both groups. Workers in both groups had frequent risk factors for kidney stones, particularly high calcium, oxalate, sodium, uric-acid, phosphorus and low urinary volume on testing. The authors conclude that the urinary tract disorders in the nuclear workers were not the result of occupational hazards at this site

  13. U-Healthcare Center Service in Busan City, South Korea: An Empirical Analysis and the Results of 1 Year of Service.

    Science.gov (United States)

    Bravo Santisteban, Ramiro D; Youm, Sekyoung; Park, Seung-Hun

    2015-10-01

    Studies have demonstrated that technological innovation is vital for prosperous economies, and greater technological innovation leads to improved public health indicators. The South Korean government has implemented policies to provide city services using information communication technologies, and ubiquitous healthcare (u-healthcare) wellness is one of these. This article presents the effects of using a u-healthcare center model that proves self-healthcare monitoring can work for the general population. The u-healthcare center has provided service to the public since April 2013. It is equipped with medical devices that evaluate physiological parameters such as weight, body mass index (BMI), blood pressure (BP), pulse rate (PR), and body fat (BF). This article focuses on the analysis of BMI, BP, PR, and BF parameters. Health test results from 12,766 voluntary patients of the u-healthcare center were analyzed during a 1-year period. The four health parameters from each of the four seasons were analyzed and compared, showing statistically significant seasonal differences. A Duncan's post hoc analysis showed that BMI did not differ between spring and summer, whereas BP differed throughout all seasons. Participation of females was higher compared with males, and men's average BMI was statistically higher than that of the women. Some additional significant findings for all participants were as follows: 48.8% scored normal in BMI, 31.7% scored normal-controlled in BP, 90.7% scored normal in PR, and 24.8% scored normal in BF. A survey showed that 96.4% found the u-healthcare center to be generally helpful, and 95.7% responded that they would recommend it. Implementation of u-healthcare projects provides a new public service toward evaluating health parameters, providing historical health information access, promoting self-monitoring, and motivating users to be more aware of their own health status.

  14. Alternative Fuels Data Center: Virginia Transportation Data for Alternative

    Science.gov (United States)

    /2018 Biodiesel and Green Diesel Definitions updated 4/9/2018 Data Download Fueling Stations 706 stations in Virginia with alternative fuels Fuel Public Private Biodiesel (B20 and above) 1 9 Compressed unit sold per GGE per unit sold per GGE Biodiesel (B20) $2.47/gallon $2.25/GGE $2.84/gallon $2.58/GGE

  15. Innovative Services Offered by School-Based Health Centers in New York City

    Science.gov (United States)

    Sisselman, Amanda; Strolin-Goltzman, Jessica; Auerbach, Charles; Sharon, Lisa

    2012-01-01

    School-based health centers (SBHCs) continue to provide essential health care services to children and families in underserved neighborhoods across the country. Preliminary studies show that students who use SBHCs have better attendance rates as well as higher rates of academic achievement and attachment to the learning environment. Few studies,…

  16. Quantitative Analysis of Contributing Factors Affecting Patient Satisfaction in Family Medicine Service Clinics at Brooke Army Medical Center

    Science.gov (United States)

    2008-06-06

    Predictors of patient satisfaction for Brooke Army Medical Center Family Medicine Service primary care clinics was performed. Data was obtained from...Factors Affecting Patient Satisfaction in Family Medicine Service Clinics at Brooke Army Medical Center Presented to MAJ Eric Schmacker, Ph.D. In...study. All patients ’ medical information was protected at all times and under no circumstances will be discussed or released to any outside agency

  17. Human‐Centered Design: Integrating Services & Systems Around People By Providing A Common Ground for Action

    DEFF Research Database (Denmark)

    Junginger, Sabine

    2014-01-01

    to both professional fields. Yet, how human‐centered design is being practiced and applied depends on the interpretation of the concept, or the “designer’s stance” (Buchanan 2011). In this paper, I trace the shifts in design thinking and the role of people in service engineering and in service design. I...

  18. Sipping test update device for fuel elements cladding inspections in IPR-r1 TRIGA reactor

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues, R.R.; Mesquita, A.Z.; Andrade, E.P.D.; Gual, Maritza R., E-mail: rrr@cdtn.br, E-mail: amir@cdtn.br, E-mail: edson@cdtn.br, E-mail: maritzargual@gmail.com [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2015-07-01

    It is in progress at the Centro de Desenvolvimento da Tecnologia Nuclear - CDTN (Nuclear Technology Development Center), a research project that aims to investigate possible leaks in the fuel elements of the TRIGA reactor, located in this research center. This paper presents the final form of sipping test device for TRIGA reactor, and results of the first experiments setup. Mechanical support strength tests were made by knotting device on the crane, charged with water from the conventional water supply, and tests outside the reactor pool with the use of new non-irradiated fuel elements encapsulated in stainless steel, and available safe stored in this unit. It is expected that tests with graphite elements from reactor pool are done soon after and also the test experiment with the first fuel elements in service positioned in the B ring (central ring) of the reactor core in the coming months. (author)

  19. Sipping test update device for fuel elements cladding inspections in IPR-r1 TRIGA reactor

    International Nuclear Information System (INIS)

    Rodrigues, R.R.; Mesquita, A.Z.; Andrade, E.P.D.; Gual, Maritza R.

    2015-01-01

    It is in progress at the Centro de Desenvolvimento da Tecnologia Nuclear - CDTN (Nuclear Technology Development Center), a research project that aims to investigate possible leaks in the fuel elements of the TRIGA reactor, located in this research center. This paper presents the final form of sipping test device for TRIGA reactor, and results of the first experiments setup. Mechanical support strength tests were made by knotting device on the crane, charged with water from the conventional water supply, and tests outside the reactor pool with the use of new non-irradiated fuel elements encapsulated in stainless steel, and available safe stored in this unit. It is expected that tests with graphite elements from reactor pool are done soon after and also the test experiment with the first fuel elements in service positioned in the B ring (central ring) of the reactor core in the coming months. (author)

  20. 34 CFR 645.13 - What additional services do Upward Bound Math and Science Centers provide and how are they...

    Science.gov (United States)

    2010-07-01

    ... 34 Education 3 2010-07-01 2010-07-01 false What additional services do Upward Bound Math and... Program? § 645.13 What additional services do Upward Bound Math and Science Centers provide and how are... provided under § 645.11(b), an Upward Bound Math and Science Center must provide— (1) Intensive instruction...

  1. Alternative Fuels Data Center: How Do All-Electric Cars Work?

    Science.gov (United States)

    battery pack to power the electric motor and must be plugged in to a charging station or wall outlet to the typical liquid fuel components, such as a fuel pump, fuel line, or fuel tank. Learn more about electric vehicles. All electric sedan image Key Components of an All-Electric Car Battery (auxiliary): In

  2. Department of Energy report on fee for spent nuclear fuel storage and disposal services

    International Nuclear Information System (INIS)

    1980-10-01

    Since the July 1978 publication of an estimated fee for storage and disposal, several changes have occurred in the parameters which impact the spent fuel fee. DOE has mounted a diversified program of geologic investigations that will include locating and characterizing a number of potential repository sites in a variety of different geologic environments with diverse rock types. As a result, the earliest operation date of a geologic repository is now forecast for 1997. Finally, expanded spent fuel storage capabilities at reactors have reduced the projected quantities of fuel to be stored and disposed of. The current estimates for storage and disposal are presented. This fee has been developed from DOE program information on spent fuel storage requirements, facility availability, facility cost estimates, and research and development programs. The discounted cash flow technique has used the most recent estimates of cost of borrowing by the Federal Government. This estimate has also been used in calculating the Federal charge for uranium enrichment services. A prepayment of a percentage of the storage portion of the fee is assumed to be required 5 years before spent fuel delivery. These funds and the anticipated $300 million in US Treasury borrowing authority should be sufficient to finance the acquisition of storage facilities. Similarly, a prepayment of a percentage of the disposal portion would be collected at the same time and would be used to offset disposal research and development expenditures. The balance of the storage and disposal fees will be collected upon spent fuel delivery. If disposal costs are different from what was estimated, there will be a final adjustment of the disposal portion of the fee when the spent fuel is shipped from the AFR for permanent disposal. Based on current spent fuel storage requirements, at least a 30 percent prepayment of the fee will be required

  3. Wound center facility billing: A retrospective analysis of time, wound size, and acuity scoring for determining facility level of service.

    Science.gov (United States)

    Fife, Caroline E; Walker, David; Farrow, Wade; Otto, Gordon

    2007-01-01

    Outpatient wound center facility reimbursement for Medicare beneficiaries can be a challenge to determine and obtain. To compare methods of calculating facility service levels for outpatient wound centers and to demonstrate the advantages of an acuity-based billing system (one that incorporates components of facility work that is non-reimbursable by procedure codes and that represents an activity-based costing approach to medical billing), a retrospective study of 5,098 patient encounters contained in a wound care-specific electronic medical record database was conducted. Approximately 500 patient visits to the outpatient wound center of a Texas regional hospital between April 2003 and November 2004 were categorized by service level in documentation and facility management software. Visits previously billed using a time-based system were compared to the Centers for Medicare and Medicaid Services' proposed three-tiered wound size-based system. The time-based system also was compared to an acuity-based scoring system. The Pearson correlation coefficient between billed level of service by time and estimated level of service by acuity was 0.442 and the majority of follow-up visits were billed as Level 3 and above (on a time level of 1 to 5) , confirming that time is not a surrogate for actual work performed. Wound size also was found to be unrelated to service level (Pearson correlation = 0.017) and 97% of wound areas were billings than extremes; no other method produced this distribution. Hospital-based outpatient wound centers should develop, review, and refine acuity score-based models on which to determine billed level of service.

  4. Data and Data Products for Climate Research: Web Services at the Asia-Pacific Data-Research Center (APDRC)

    Science.gov (United States)

    DeCarlo, S.; Potemra, J. T.; Wang, K.

    2012-12-01

    The International Pacific Research Center (IPRC) at the University of Hawaii maintains a data center for climate studies called the Asia-Pacific Data-Research Center (APDRC). This data center was designed within a center of excellence in climate research with the intention of serving the needs of the research scientist. The APDRC provides easy access to a wide collection of climate data and data products for a wide variety of users. The data center maintains an archive of approximately 100 data sets including in-situ and remote data, as well as a range of model-based output. All data are available via on-line browsing tools such as a Live Access Server (LAS) and DChart, and direct binary access is available through OPeNDAP services. On-line tutorials on how to use these services are now available. Users can keep up-to-date with new data and product announcements via the APDRC facebook page. The main focus of the APDRC has been climate scientists, and the services are therefore streamlined to such users, both in the number and types of data served, but also in the way data are served. In addition, due to the integration of the APDRC within the IPRC, several value-added data products (see figure for an example using Argo floats) have been developed via a variety of research activities. The APDRC, therefore, has three main foci: 1. acquisition of climate-related data, 2. maintenance of integrated data servers, and 3. development and distribution of data products The APDRC can be found at http://apdrc.soest.hawaii.edu. The presentation will provide an overview along with specific examples of the data, data products and data services available at the APDRC.; APDRC product example: gridded field from Argo profiling floats

  5. Emergency fuels utilization guidebook. Alternative Fuels Utilization Program

    Energy Technology Data Exchange (ETDEWEB)

    1980-08-01

    The basic concept of an emergency fuel is to safely and effectively use blends of specification fuels and hydrocarbon liquids which are free in the sense that they have been commandeered or volunteered from lower priority uses to provide critical transportation services for short-duration emergencies on the order of weeks, or perhaps months. A wide variety of liquid hydrocarbons not normally used as fuels for internal combustion engines have been categorized generically, including limited information on physical characteristics and chemical composition which might prove useful and instructive to fleet operators. Fuels covered are: gasoline and diesel fuel; alcohols; solvents; jet fuels; kerosene; heating oils; residual fuels; crude oils; vegetable oils; gaseous fuels.

  6. Energy Efficiency Center - Overview

    International Nuclear Information System (INIS)

    Obryk, E.

    2000-01-01

    Full text: The Energy Efficiency Center (EEC) activities have been concentrated on Energy Efficiency Network (SEGE), education and training of energy auditors. EEC has started studies related to renewable fuels (bio fuel, wastes) and other topics related to environment protection. EEC has continued close collaboration with Institute for Energy Technology, Kjeller, Norway. It has been organized and conducted Seminar and Workshop on ''How to Reduce Energy and Water Cost in Higher Education Buildings'' for general and technical managers of the higher education institutions. This Seminar was proceeded by the working meeting on energy efficiency strategy in higher education at the Ministry of National Education. EEC has worked out proposal for activities of Cracow Regional Agency for Energy Efficiency and Environment and has made offer to provide services for this Agency in the field of training, education and consulting. The vast knowledge and experiences in the field of energy audits have been used by the members of EEC in lecturing at energy auditors courses authorized by the National Energy Efficiency Agency (KAPE). Altogether 20 lectures have been delivered. (author)

  7. On-site fuel cell field test support program

    Science.gov (United States)

    Staniunas, J. W.; Merten, G. P.

    1982-01-01

    In order to assess the impact of grid connection on the potential market for fuel cell service, applications studies were conducted to identify the fuel cell operating modes and corresponding fuel cell sizing criteria which offer the most potential for initial commercial service. The market for grid-connected fuel cell service was quantified using United's market analysis program and computerized building data base. Electric and gas consumption data for 268 buildings was added to our surveyed building data file, bringing the total to 407 buildings. These buildings were analyzed for grid-isolated and grid-connected fuel cell service. The results of the analyses indicated that the nursing home, restaurant and health club building sectors offer significant potential for fuel cell service.

  8. Competing Goodness: Perceptions of Person-Centered Culture Change within Human Service Agencies

    Science.gov (United States)

    Starling, Stacey Lee

    2012-01-01

    Front and center in the endeavor to "reform" health care is the appeal to change the culture of aging within provider organizations situated in the long-term care continuum. Person-centeredness is the latest philosophical overlay to aging care and supports and services. As a dominate paradigm guiding change, the movement intends to shift…

  9. The Geodetic Seamless Archive Centers Service Layer: A System Architecture for Federating Geodesy Data Repositories

    Science.gov (United States)

    McWhirter, J.; Boler, F. M.; Bock, Y.; Jamason, P.; Squibb, M. B.; Noll, C. E.; Blewitt, G.; Kreemer, C. W.

    2010-12-01

    Three geodesy Archive Centers, Scripps Orbit and Permanent Array Center (SOPAC), NASA's Crustal Dynamics Data Information System (CDDIS) and UNAVCO are engaged in a joint effort to define and develop a common Web Service Application Programming Interface (API) for accessing geodetic data holdings. This effort is funded by the NASA ROSES ACCESS Program to modernize the original GPS Seamless Archive Centers (GSAC) technology which was developed in the 1990s. A new web service interface, the GSAC-WS, is being developed to provide uniform and expanded mechanisms through which users can access our data repositories. In total, our respective archives hold tens of millions of files and contain a rich collection of site/station metadata. Though we serve similar user communities, we currently provide a range of different access methods, query services and metadata formats. This leads to a lack of consistency in the userís experience and a duplication of engineering efforts. The GSAC-WS API and its reference implementation in an underlying Java-based GSAC Service Layer (GSL) supports metadata and data queries into site/station oriented data archives. The general nature of this API makes it applicable to a broad range of data systems. The overall goals of this project include providing consistent and rich query interfaces for end users and client programs, the development of enabling technology to facilitate third party repositories in developing these web service capabilities and to enable the ability to perform data queries across a collection of federated GSAC-WS enabled repositories. A fundamental challenge faced in this project is to provide a common suite of query services across a heterogeneous collection of data yet enabling each repository to expose their specific metadata holdings. To address this challenge we are developing a "capabilities" based service where a repository can describe its specific query and metadata capabilities. Furthermore, the architecture of

  10. Nuclear fuel rods

    International Nuclear Information System (INIS)

    Wada, Toyoji.

    1979-01-01

    Purpose: To remove failures caused from combination of fuel-cladding interactions, hydrogen absorptions, stress corrosions or the likes by setting the quantity ratio of uranium or uranium and plutonium relative to oxygen to a specific range in fuel pellets and forming a specific size of a through hole at the center of the pellets. Constitution: In a fuel rods of a structure wherein fuel pellets prepared by compacting and sintering uranium dioxide, or oxide mixture consisting of oxides of plutonium and uranium are sealed with a zirconium metal can, the ratio of uranium or uranium and plutonium to oxygen is specified as 1 : 2.01 - 1 : 2.05 in the can and a passing hole of a size in the range of 15 - 30% of the outer diameter of the fuel pellet is formed at the center of the pellet. This increases the oxygen partial pressure in the fuel rod, oxidizes and forms a protection layer on the inner surface of the can to control the hydrogen absorption and stress corrosion. Locallized stress due to fuel cladding interaction (PCMI) can also be moderated. (Horiuchi, T.)

  11. Managing service potentiality of small urban centers case study: City of Sardasht, south east of Iran

    Directory of Open Access Journals (Sweden)

    Farjam Rasoul

    2017-06-01

    Finding showed that those services which are more important in role fulfillment of Sardasht market-town include: sanitation house, health, remedial centers, drugstore, dentistry, high school, pre-university, library, transportation, trading agricultural instrument, referring to the banks, foodstuff and nonfood stuffs stores, post office and telecommunication, referring to official & disciplinary centers, medical services, veterinary. And to some extent farming instruments markets doesn’t affect role fulfillment so it should be focused by those locals in charge. Also the results showed that three settlements, Khomeinishahr, Jakdan and Goharan are going to continue the role fulfillment of Sardasht market- town.

  12. Test facilities for radioactive materials transport packages (Transportation Technology Center Inc., Pueblo, Colorado, USA)

    International Nuclear Information System (INIS)

    Conlon, P.C.L.

    2001-01-01

    Transportation Technology Center, Inc. is capable of conducting tests on rail vehicle systems designed for transporting radioactive materials including low level waste debris, transuranic waste, and spent nuclear fuel and high level waste. Services include rail vehicle dynamics modelling, on-track performance testing, full scale structural fatigue testing, rail vehicle impact tests, engineering design and technology consulting, and emergency response training. (author)

  13. Fuel Cycle Concept with Advanced METMET and Composite Fuel in LWRs

    International Nuclear Information System (INIS)

    Savchenko, A.; Skupov, M.; Vatulin, A.; Glushenkov, A.; Kulakov, G.; Lipkina, K.

    2014-01-01

    The basic factor that limits the serviceability of fuel elements developing in the framework of RERTR Program (transition from HEU to LEU fuel of research reactors) is interaction between U10Mo fuel and aluminium matrix . Interaction results in extra swelling of fuels, disappearance of a heat conducting matrix, a temperature rise in the fuel centre, penetration porosity, etc. Several methods exist to prevent fuel-matrix interaction. In terms of simplifying fuel element fabrication technology and reducing interaction, doping of fuel is the most optimal version

  14. Nuclear Energy Center Site Survey, 1975. Executive summary

    International Nuclear Information System (INIS)

    1976-01-01

    The Nuclear Energy Center Site Survey is a study of a potential alternative siting approach for nuclear power and fuel-cycle facilities, an approach that would cluster sizable groups of such facilities on a relatively small number of sites. The largest aggregation of reactors on a single site being planned today is four, and this quad is assumed (for comparative study purposes) to be the typical dispersed site by the year 2000. Three basic types of nuclear energy centers are considered: power-plant centers, consisting of 10 to 40 nuclear electric generating units of 1200-megawatt electric capacity each; fuel-cycle centers, consisting of fuel reprocessing plants, mixed-oxide fuel fabrication facilities, and radioactive waste management facilities; and combined centers, containing both power plants and fuel-cycle facilities. The results of the general site-location screening efforts are shown on a United States map that shows the locations of large areas identified as likely to contain suitable candidate sites for power NECs, on the basis of four coarse screening criteria: water resources, seismic activity, population density, and statutory excluded lands

  15. Cradle-to-Grave Nuclear Fuel Supply Assurance Workshop: Industry’s Potential Role

    Energy Technology Data Exchange (ETDEWEB)

    Bengelsdorf, Harold (Hal); Hund, Gretchen; Kessler, Carol E.; Mahy, Heidi A.; McGoldrick, Fred; Seward, Amy M.

    2007-09-30

    The Pacific Northwest Center for Global Security hosted a workshop on June 6, 2007 in Washington D.C. to discuss the feasibility, merits and implications of the United States offering cradle-to-grave nuclear fuel cycle services to other countries. The workshop consisted of a small group of senior individuals from the private sector, government and the national laboratories. The workshop is summarized and recommendations given.

  16. Person-centered care planning and service engagement: a study protocol for a randomized controlled trial.

    Science.gov (United States)

    Stanhope, Victoria; Tondora, Janis; Davidson, Larry; Choy-Brown, Mimi; Marcus, Steven C

    2015-04-22

    Service disengagement is a pervasive challenge the mental health care system faces. Mental health services are of little value should persons with mental illnesses continue to opt out of receiving them. Consumers attribute disengagement from care to an absence of choice in their treatment. In response, the mental health system is adopting a person-centered model, based upon recovery principles, to engage consumers more actively in their care. Person-centered care planning is a promising practice involving collaboration to develop and implement an actionable plan to assist the person in achieving personal recovery goals. This study design combines a parallel-group randomized controlled trial of community mental health organizations with qualitative methods to assess the effectiveness of person-centered care planning. Participants at 14 sites in Delaware and Connecticut will be randomized to treatment as usual or the person-centered care planning intervention. Participants will be in leadership (n = 70) or supervisory or direct care (n = 210) roles. The person-centered care planning intervention involves intensive staff training and 12 months of ongoing technical assistance. Quantitative survey data will be collected at baseline, 6 months and 12 months measuring person-centered care planning competency and organizational factors. Consumer outcomes (engagement, medication adherence, functioning and consumer satisfaction) will be assessed by Medicaid and state-level data. Qualitative data focused on process factors will include staff and consumer interviews and focus groups. In this intent-to-treat analysis, we will use mixed-effects multivariate regression models to evaluate the differential impact of the person-centered care planning intervention on each consumer and implementation outcome as well as the extent to which clinician assessments of organizational factors are associated with the implementation outcome. Mixed methods will triangulate and strengthen the

  17. MSU-Northern Bio-Energy Center of Excellence

    Energy Technology Data Exchange (ETDEWEB)

    Kegel, Greg [Montana State Univ., Bozeman, MT (United States); Alcorn-Windy Boy, Jessica [Montana State Univ., Bozeman, MT (United States); Abedin, Md. Joynal [Montana State Univ., Bozeman, MT (United States); Maglinao, Randy [Montana State Univ., Bozeman, MT (United States)

    2014-09-30

    MSU-Northern established the Bio-Energy Center (the Center) into a Regional Research Center of Excellence to address the obstacles concerning biofuels, feedstock, quality, conversion process, economic viability and public awareness. The Center built its laboratories and expertise in order to research and support product development and commercialization for the bio-energy industry in our region. The Center wanted to support the regional agricultural based economy by researching biofuels based on feedstock’s that can be grown in our region in an environmentally responsible manner. We were also interested in any technology that will improve the emissions and fuel economy performance of heavy duty diesel engines. The Center had a three step approach to accomplish these goals: 1. Enhance the Center’s research and testing capabilities 2. Develop advanced biofuels from locally grown agricultural crops. 3. Educate and outreach for public understanding and acceptance of new technology. The Center was very successful in completing the tasks as outlined in the project plan. Key successes include discovering and patenting a new chemical conversion process for converting camelina oil to jet fuel, as well as promise in developing a heterogeneous Grubs catalyst to support the new chemical conversion process. The Center also successfully fragmented and deoxygenated naturally occurring lignin with a Ni-NHC catalyst, showing promise for further exploration of using lignin for fuels and fuel additives. This would create another value-added product for lignin that can be sourced from beetle kill trees or waste products from cellulose ethanol fuel facilities.

  18. Nuclear Energy Center Site Survey, 1975. Part I. Summary and conclusions

    International Nuclear Information System (INIS)

    1976-01-01

    The Nuclear Energy Center Site Survey is a study of a potential siting approach for projected power and fuel-cycle facilities that would cluster sizable groups of such facilities on a relatively small number of sites, as contrasted with current dispersed siting practices. Three basic types of nuclear energy centers (NECs) are considered: power-plant centers, involving ten to forty units of 1200-megawatt electric capacity each; fuel-cycle centers, involving fuel reprocessing plants, mixed-oxide fuel fabrication facilities, and high-level and transuranic radioactive waste management facilities, with a capacity corresponding to the fuel throughput of power plants with a total capacity of approximately 50,000 to 300,000 MWe; and combined centers, containing both power plants and fuel cycle facilities in representative possible combinations. Included among the principal issues considered in evaluation of feasibility of nuclear energy centers are dissipation of the waste heat from the power-generating facilities; transmission system design, reliability, and economics; radiological impact; and environmental impact

  19. LPG fuel

    International Nuclear Information System (INIS)

    Dagnas, F.X.; Jeuland, N.; Fouquet, J.P.; Lauraire, S.; Coroller, P.

    2005-01-01

    LPG fuel has become frequently used through a distribution network with 2 000 service stations over the French territory. LPG fuel ranks number 3 world-wide given that it can be used on individual vehicles, professional fleets, or public transport. What is the environmental benefit of LPG fuel? What is the technology used for these engines? What is the current regulation? Government commitment and dedication on support to promote LPG fuel? Car makers projects? Actions to favour the use of LPG fuel? This article gathers 5 presentations about this topic given at the gas conference

  20. Characteristics of service requests and service processes of fire and rescue service dispatch centers: analysis of real world data and the underlying probability distributions.

    Science.gov (United States)

    Krueger, Ute; Schimmelpfeng, Katja

    2013-03-01

    A sufficient staffing level in fire and rescue dispatch centers is crucial for saving lives. Therefore, it is important to estimate the expected workload properly. For this purpose, we analyzed whether a dispatch center can be considered as a call center. Current call center publications very often model call arrivals as a non-homogeneous Poisson process. This bases on the underlying assumption of the caller's independent decision to call or not to call. In case of an emergency, however, there are often calls from more than one person reporting the same incident and thus, these calls are not independent. Therefore, this paper focuses on the dependency of calls in a fire and rescue dispatch center. We analyzed and evaluated several distributions in this setting. Results are illustrated using real-world data collected from a typical German dispatch center in Cottbus ("Leitstelle Lausitz"). We identified the Pólya distribution as being superior to the Poisson distribution in describing the call arrival rate and the Weibull distribution to be more suitable than the exponential distribution for interarrival times and service times. However, the commonly used distributions offer acceptable approximations. This is important for estimating a sufficient staffing level in practice using, e.g., the Erlang-C model.

  1. A Study Investigating the Perceived Service Quality Levels of Sport Center Members: A Kano Model Perspective

    Science.gov (United States)

    Yildiz, Kadir; Polat, Ercan; Güzel, Pinar

    2018-01-01

    The purpose of this study is to investigate sport center members' perceived service quality levels with a view to Kano customer expectations and requirements model. To that end, a descriptive approach and a correlational research design featuring survey method is adopted. Research group consists of 680 (300 women, 380 men) sport center members who…

  2. Area health education centers and health science library services.

    Science.gov (United States)

    West, R T; Howard, F H

    1977-07-01

    A study to determine the impact that the Area Health Education Center type of programs may have on health science libraries was conducted by the Extramural Programs, National Library of Medicine, in conjunction with a contract awarded by the Bureau of Health Manpower, Health Resources Administration, to develop an inventory of the AHEC type of projects in the United States. Specific study tasks included a review of these programs as they relate to library and information activities, on-site surveys on the programs to define their needs for library services and information, and a categorization of library activities. A major finding was that health science libraries and information services are generally not included in AHEC program planning and development, although information and information exchange is a fundamental part of the AHEC type of programs. This study suggests that library inadequacies are basically the result of this planning failure and of a lack of financial resources; however, many other factors may be contributory. The design and value of library activities for these programs needs explication.

  3. Fuel assembly

    International Nuclear Information System (INIS)

    Chaki, Masao; Nishida, Koji; Karasawa, Hidetoshi; Kanazawa, Toru; Orii, Akihito; Nagayoshi, Takuji; Kashiwai, Shin-ichi; Masuhara, Yasuhiro

    1998-01-01

    The present invention concerns a fuel assembly, for a BWR type nuclear reactor, comprising fuel rods in 9 x 9 matrix. The inner width of the channel box is about 132mm and the length of the fuel rods which are not short fuel rods is about 4m. Two water rods having a circular cross section are arranged on a diagonal line in a portion of 3 x 3 matrix at the center of the fuel assembly, and two fuel rods are disposed at vacant spaces, and the number of fuel rods is 74. Eight fuel rods are determined as short fuel rods among 74 fuel rods. Assuming the fuel inventory in the short fuel rod as X(kg), and the fuel inventory in the fuel rods other than the short fuel rods as Y(kg), X and Y satisfy the relation: X + Y ≥ 173m, Y ≤ - 9.7X + 292, Y ≤ - 0.3X + 203 and X > 0. Then, even when the short fuel rods are used, the fuel inventory is increased and fuel economy can be improved. (I.N.)

  4. Family-Centered Services for Children with ASD and Limited Speech: The Experiences of Parents and Speech-Language Pathologists

    Science.gov (United States)

    Mandak, Kelsey; Light, Janice

    2018-01-01

    Although family-centered services have long been discussed as essential in providing successful services to families of children with autism spectrum disorder (ASD), ideal implementation is often lacking. This study aimed to increase understanding of how families with children with ASD and limited speech receive services from speech-language…

  5. Evaluation of health care services provided for older adults in primary health care centers and its internal environment. A step towards age-friendly health centers.

    Science.gov (United States)

    Alhamdan, Adel A; Alshammari, Sulaiman A; Al-Amoud, Maysoon M; Hameed, Tariq A; Al-Muammar, May N; Bindawas, Saad M; Al-Orf, Saada M; Mohamed, Ashry G; Al-Ghamdi, Essam A; Calder, Philip C

    2015-09-01

    To evaluate the health care services provided for older adults by primary health care centers (PHCCs) in Riyadh, Kingdom of Saudi Arabia (KSA), and the ease of use of these centers by older adults. Between October 2013 and January 2014, we conducted a descriptive cross-sectional study of 15 randomly selected PHCCs in Riyadh City, KSA. The evaluation focused on basic indicators of clinical services offered and factors indicative of the ease of use of the centers by older adults. Evaluations were based upon the age-friendly PHCCs toolkit of the World Health Organization. Coverage of basic health assessments (such as blood pressure, diabetes, and blood cholesterol) was generally good. However, fewer than half of the PHCCs offered annual comprehensive screening for the common age-related conditions. There was no screening for cancer. Counseling on improving lifestyle was provided by most centers. However, there was no standard protocol for counseling. Coverage of common vaccinations was poor. The layout of most PHCCs and their signage were good, except for lack of Braille signage. There may be issues of access of older adults to PHCCs through lack of public transport, limited parking opportunities, the presence of steps, ramps, and internal stairs, and the lack of handrails. Clinical services and the internal environment of PHCCs can be improved. The data will be useful for health-policy makers to improve PHCCs to be more age-friendly.

  6. Evaluation of health care services provided for older adults in primary health care centers and its internal environment. A step towards age-friendly health centers

    Directory of Open Access Journals (Sweden)

    Adel A. Alhamdan

    2015-09-01

    Full Text Available Objectives: To evaluate the health care services provided for older adults by primary health care centers (PHCCs in Riyadh, Kingdom of Saudi Arabia (KSA, and the ease of use of these centers by older adults. Methods: Between October 2013 and January 2014, we conducted a descriptive cross-sectional study of 15 randomly selected PHCCs in Riyadh City, KSA. The evaluation focused on basic indicators of clinical services offered and factors indicative of the ease of use of the centers by older adults. Evaluations were based upon the age-friendly PHCCs toolkit of the World Health Organization. Results: Coverage of basic health assessments (such as blood pressure, diabetes, and blood cholesterol was generally good. However, fewer than half of the PHCCs offered annual comprehensive screening for the common age-related conditions. There was no screening for cancer. Counseling on improving lifestyle was provided by most centers. However, there was no standard protocol for counseling. Coverage of common vaccinations was poor. The layout of most PHCCs and their signage were good, except for lack of Braille signage. There may be issues of access of older adults to PHCCs through lack of public transport, limited parking opportunities, the presence of steps, ramps, and internal stairs, and the lack of handrails. Conclusions: Clinical services and the internal environment of PHCCs can be improved. The data will be useful for health-policy makers to improve PHCCs to be more age-friendly.

  7. A Study of Children's Geographic Access to Health Services (Health Care Centers and Clinical Laboratories in Kermanshah City, Iran

    Directory of Open Access Journals (Sweden)

    Sohyla Reshadat

    2018-02-01

    Full Text Available Background Given that the protection of children's health is of special importance due to their special age and physical conditions, the present study aimed to investigate the condition of children's Geographic access to health services (Health Centers and Clinical Laboratories in Kermanshah city, Iran. Materials and Methods: In this applied study, the research approach was descriptive-analytic using quantitative models in Geographic information system (GIS environment. The statistical population was the whole population of young girls aged 0-14 years old in Kermanshah, Iran. Moreover, to evaluate the spatial deployment pattern of health services and the correct and true access of this groupto such services, all data and information were collected through the Iranian Statistics Center and evaluated using the Arc-GIS Software. The latest published population statistics on the Population and Housing Census in 2011 were considered the basis for the analyses. Results: The results of the present study demonstrated that more than 40% and 60% of the young girls aged 0-14 years old in Kermanshah were deprived of proper access to health centers and clinical laboratories, respectively. In terms of the status of children’s access in the Second Scenario (access to health services by vehicles and during 5, 10, and 15 minutes, about 5.53%, 93.1% and 15.1% lacked access to health centers, respectively. In addition, in terms of the status of children’s access to clinical laboratories during 5, 10, and 15 minutes, 17.26%, 65.4% and 51% lacked access to clinical laboratories, respectively. Conclusion: The access of young girls aged 0-14 years old to health services in Kermanshah was undesirable in the access to health services through walking. Additionally, the access of this groupto health services in the access to health services by vehicles was far better than the first one.

  8. Alternative Fuels Data Center: Hybrid and Plug-In Electric Vehicles

    Science.gov (United States)

    primary fuel or to improve the efficiency of conventional vehicle designs. Hybrid Electric Vehicles Icon cost and emissions with a conventional vehicle. Select Fuel/Technology Electric Hybrid Electric Plug-in Hybrid Electric Natural Gas (CNG) Flex Fuel (E85) Biodiesel (B20) Propane (LPG) Next Vehicle Cost

  9. Referral Practices Among U.S. Publicly Funded Health Centers That Offer Family Planning Services.

    Science.gov (United States)

    Carter, Marion W; Robbins, Cheryl L; Gavin, Loretta; Moskosky, Susan

    2018-01-29

    Referrals to other medical services are central to healthcare, including family planning service providers; however, little information exists on the nature of referral practices among health centers that offer family planning. We used a nationally representative survey of administrators from 1,615 publicly funded health centers that offered family planning in 2013-14 to describe the use of six referral practices. We focused on associations between various health center characteristics and frequent use of three active referral practices. In the prior 3 months, a majority of health centers (73%) frequently asked clients about referrals at clients' next visit. Under half (43%) reported frequently following up with referral sources to find out if their clients had been seen. A third (32%) of all health centers reported frequently using three active referral practices. In adjusted analysis, Planned Parenthood clinics (adjusted odds ratio 0.55) and hospital-based clinics (AOR 0.39) had lower odds of using the three active referral practices compared with health departments, and Title X funding status was not associated with the outcome. The outcome was positively associated with serving rural areas (AOR 1.39), having a larger client volume (AOR 3.16), being a part of an insurance network (AOR 1.42), and using electronic health records (AOR 1.62). Publicly funded family planning providers were heavily engaged in referrals. Specific referral practices varied widely and by type of care. More assessment of these and other aspects of referral systems and practices is needed to better characterize the quality of care.

  10. Service utilization in community health centers in China: a comparison analysis with local hospitals

    Directory of Open Access Journals (Sweden)

    Wang Xiaohang

    2006-08-01

    Full Text Available Abstract Background Being an important part of China's Urban Health Care Reform System, Community Health Centers (CHCs have been established throughout the entire country and are presently undergoing substantial reconstruction. However, the services being delivered by the CHCs are far from reaching their performance targets. In order to assess the role of the CHCs, we examined their performance in six cities located in regions of South-East China. The purpose of this investigation was to identify the utilization and the efficiency of community health resources that are able to provide basic medical and public health services. Methods The study was approved by Peking University Health Science Center Institutional Reviewing Board (NO: IRB00001052-T1. Data were collected from all the local health bureaux and processed using SPSS software. Methods of analysis mainly included: descriptive analysis, paired T-test and one-way ANOVA. Results The six main functions of the CHCs were not fully exploited and the surveys that were collected on their efficiency and utilization of resources indicate that they have a low level of performance and lack the trust of local communities. Furthermore, the CHCs seriously lack funding support and operate under difficult circumstances, and residents have less positive attitudes towards them. Conclusion The community health service must be adjusted according to the requirements of urban medical and health reform, taking into account communities' health needs. More research is required on the living standards and health needs of residents living within the CHC's range, taking into consideration the users' needs in expanding the newly implemented service, and at the same time revising the old service system so as to make the development of CHCs realistic and capable of providing a better service to patients. Several suggestions are put forward for an attainable scheme for developing a community health service.

  11. Alternative Fuels Data Center: Hydrogen Related Links

    Science.gov (United States)

    marketing zero-emission proton exchange membrane (PEM) fuel cells for transportation and power generation production and use. Energy Management Institute The Energy Management Institute publishes the Alternative

  12. Spent fuels program

    International Nuclear Information System (INIS)

    Shappert, L.B.

    1983-01-01

    The goal of this task is to support the Domestic Spent Fuel Storage Program through studies involving the transport of spent fuel. A catalog was developed to provide authoritative, timely, and accessible transportation information for persons involved in the transport of irradiated reactor fuel. The catalog, drafted and submitted to the Transportation Technology Center, Sandia National Laboratories, for their review and approval, covers such topics as federal, state, and local regulations, spent fuel characteristics, cask characteristics, transportation costs, and emergency response information

  13. Using secure web services to visualize poison center data for nationwide biosurveillance: a case study.

    Science.gov (United States)

    Savel, Thomas G; Bronstein, Alvin; Duck, William; Rhodes, M Barry; Lee, Brian; Stinn, John; Worthen, Katherine

    2010-01-01

    Real-time surveillance systems are valuable for timely response to public health emergencies. It has been challenging to leverage existing surveillance systems in state and local communities, and, using a centralized architecture, add new data sources and analytical capacity. Because this centralized model has proven to be difficult to maintain and enhance, the US Centers for Disease Control and Prevention (CDC) has been examining the ability to use a federated model based on secure web services architecture, with data stewardship remaining with the data provider. As a case study for this approach, the American Association of Poison Control Centers and the CDC extended an existing data warehouse via a secure web service, and shared aggregate clinical effects and case counts data by geographic region and time period. To visualize these data, CDC developed a web browser-based interface, Quicksilver, which leveraged the Google Maps API and Flot, a javascript plotting library. Two iterations of the NPDS web service were completed in 12 weeks. The visualization client, Quicksilver, was developed in four months. This implementation of web services combined with a visualization client represents incremental positive progress in transitioning national data sources like BioSense and NPDS to a federated data exchange model. Quicksilver effectively demonstrates how the use of secure web services in conjunction with a lightweight, rapidly deployed visualization client can easily integrate isolated data sources for biosurveillance.

  14. Outcomes of a Freedom of Choice Reform in Community Mental Health Day Center Services.

    Science.gov (United States)

    Eklund, Mona; Markström, Urban

    2015-11-01

    A freedom-of-choice reform within mental health day center services was evaluated. The reform aimed to (1) facilitate users' change between units and (2) increase the availability of service providers. Seventy-eight users responded to questionnaires about the reform, empowerment, social network, engagement and satisfaction and were followed-up after 15 months. Fifty-four percent knew about the reform. A majority stated the reform meant nothing to them; ~25 % had a negative and ~20 % a positive opinion. Satisfaction with the services had decreased after 15 months. Empowerment decreased for a more intensively followed subgroup. No positive consequences of the reform could thus be discerned.

  15. Current neurotrauma treatment practice in secondary medical service centers

    International Nuclear Information System (INIS)

    Suehiro, Eiichi; Yoshino, Hiroko; Koizumi, Hiroyasu; Yoneda, Hiroshi; Suzuki, Michiyasu

    2011-01-01

    Despite neurotrauma treatment practices comprising a significant amount of neurosurgical work for secondary medical service centers, little attention has been placed on neurotrauma cases and evaluation of current neurotrauma treatment practices is limited. Therefore we investigated current neurotrauma practices in our hospital located in a Japanese suburban city. We analyzed 439 patients with traumatic brain injury (TBI) admitted to our hospital between April 2004 and October 2010. Patients were divided into three groups based on the Glasgow Coma Scale (GCS) score on admission: mild TBI (GCS 14-15) in 252 patients (57.4%), moderate TBI (GCS 9-13) in 116 patients (26.4%), and severe TBI (GCS 3-8) in 71 patients (16.2%). Age, gender, alcohol consumption, cause of injury, cranial CT findings, neurosurgical procedure, length of hospital stay, and clinical outcome were analyzed. The average age of the patients was 59.2 years old. Male patients comprised 65%. Alcohol consumption was reported in 81 cases (18.5%), most of them with moderate TBI. Fall (208 cases, 47.4%) was the most frequent cause of injury, followed by traffic accident (115 cases, 26.2%) and high fall (73 cases, 16.6%). Acute subdural hematoma (174 cases, 39.6%) was most frequently seen in cranial CT findings on admission, which significantly increased with severity. A neurosurgical procedure was performed for 70 cases (15.9%), of which 15 (6.0%) were mild TBI and 18 (15.5%) were moderate TBI. The average hospital stay was 20.8 days, which significantly increased with severity. The overall rate of favorable outcome was 82.7%, and mortality was 8.2%; outcome deteriorated with severity. Some mild and moderate TBI cases had deteriorated and required surgery or resulted in death. These findings suggest that cautious treatment is necessary even in mild to moderate TBI cases which are often encountered in secondary medical service centers. (author)

  16. Fuel assembly

    International Nuclear Information System (INIS)

    Watanabe, Shoichi; Hirano, Yasushi.

    1998-01-01

    A one-half or more of entire fuel rods in a fuel assembly comprises MOX fuel rods containing less than 1wt% of burnable poisons, and at least a portion of the burnable poisons comprises gadolinium. Then, surplus reactivity at an initial stage of operation cycle is controlled to eliminate burnable poisons remained unburnt at a final stage, as well as increase thermal reactivity. In addition, the content of fission plutonium is determined to greater than the content of uranium 235, and fuel rods at corner portions are made not to incorporate burnable poisons. Fuel rods not containing burnable poisons are disposed at positions in adjacent with fuel rods facing to a water rod at one or two directions. Local power at radial center of the fuel assembly is increased to flatten the distortion of radial power distribution. (N.H.)

  17. Flame holding tolerant fuel and air premixer for a gas turbine combustor

    Science.gov (United States)

    York, William David; Johnson, Thomas Edward; Ziminsky, Willy Steve

    2012-11-20

    A fuel nozzle with active cooling is provided. It includes an outer peripheral wall, a nozzle center body concentrically disposed within the outer wall in a fuel and air pre-mixture. The fuel and air pre-mixture includes an air inlet, a fuel inlet and a premixing passage defined between the outer wall in the center body. A gas fuel flow passage is provided. A first cooling passage is included within the center body in a second cooling passage is defined between the center body and the outer wall.

  18. An Overview of Hydrologic Studies at Center for Forested Wetlands Research, USDA Forest Service

    Science.gov (United States)

    Devendra M. Amatya; Carl C. Trettin; R. Wayne Skaggs; Timothy J. Callahan; Ge Sun; Masato Miwa; John E. Parsons

    2004-01-01

    Managing forested wetland landscapes for water quality improvement and productivity requires a detailed understanding of functional linkages between ecohydrological processes and management practices. Studies are being conducted at Center for Forested Wetlands Research (CFWR), USDA Forest Service to understand the fundamental hydrologic and biogeochemical processes...

  19. Alternative Fuels Data Center: Fleet Application for School Transportation

    Science.gov (United States)

    Propane Buses Jan. 26, 2016 Video thumbnail for Biodiesel Offers an Easy Alternative for Fleets Biodiesel thumbnail for Biodiesel Fuels Education in Alabama Biodiesel Fuels Education in Alabama May 1, 2012 Video School Transportation Videos on YouTube Video thumbnail for New Hampshire Cleans up with Biodiesel Buses

  20. Statement of Accountability Reconciliation Procedures for Defense Finance and Accounting Service Columbus Center, Disbursing Station 6551

    National Research Council Canada - National Science Library

    1998-01-01

    .... Beginning in FY 1996, the Defense Finance and Accounting Service (DFAS) Indianapolis Center became responsible for preparing the financial statements for the Department 97 general fund appropriations...

  1. Measuring the three process segments of a customer's service experience for an out-patient surgery center.

    Science.gov (United States)

    Wicks, Angela M; Chin, Wynne W

    2008-01-01

    The purpose of this research is to develop an alternative method of measuring out-patient satisfaction where satisfaction is the central construct. The Gap Model operationalized by SERVQUAL is widely used to measure service quality. However, the SERVQUAL instrument only measures expectations (resulting from the pre-process segment of the service experience) and perceptions (resulting from the post-process segment). All three segments should be measured. The lack of proper segmentation and methodological criticisms in the literature motivated this study. A partial least squares (PLS) approach, a form of structural equation modeling, is used to develop a framework to evaluate patient satisfaction in three service process segments: pre-process, process, and post-process service experiences. Results indicate that each process stage mediates subsequent stages, that the process segment is the most important to the patient and that the antecedents have differing impacts on patient satisfaction depending where in the process the antecedent is evaluated. Only one out-patient surgery center was evaluated. Patient satisfaction criteria specific to hospital selection are not included in this study. Results indicate what is important to patients in each service process segment that focus where ambulatory surgery centers should allocate resources. This study is the first to evaluate patient satisfaction with all three process segments.

  2. Alternative Fuels Data Center: Rhode Island Transportation Data for

    Science.gov (United States)

    stations in Rhode Island with alternative fuels Fuel Public Private Biodiesel (B20 and above) 3 3 More Rhode Island Videos on YouTube Video thumbnail for Cooking Oil Powers Biodiesel Vehicles in Rhode Island Cooking Oil Powers Biodiesel Vehicles in Rhode Island July 14, 2017 https://www.youtube.com/embed

  3. Global Land Data Assimilation System (GLDAS) Products, Services and Application from NASA Hydrology Data and Information Services Center (HDISC)

    Science.gov (United States)

    Fang, Hongliang; Beaudoing, Hiroko K.; Rodell, matthew; Teng, William L.; Vollmer, Bruce E.

    2009-01-01

    The Global Land Data Assimilation System (GLDAS) is generating a series of land surface state (e.g., soil moisture and surface temperature) and flux (e.g., evaporation and sensible heat flux) products simulated by four land surface models (CLM, Mosaic, Noah and VIC). These products are now accessible at the Hydrology Data and Information Services Center (HDISC), a component of the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC). Current data holdings include a set of 1.0 degree resolution data products from the four models, covering 1979 to the present; and a 0.25 degree data product from the Noah model, covering 2000 to the present. The products are in Gridded Binary (GRIB) format and can be accessed through a number of interfaces. Users can search the products through keywords and perform on-the-fly spatial and parameter subsetting and format conversion of selected data. More advanced visualization, access and analysis capabilities will be available in the future. The long term GLDAS data are used to develop climatology of water cycle components and to explore the teleconnections of droughts and pluvial.

  4. A family-centered, community-based system of services for children and youth with special health care needs.

    Science.gov (United States)

    Perrin, James M; Romm, Diane; Bloom, Sheila R; Homer, Charles J; Kuhlthau, Karen A; Cooley, Carl; Duncan, Paula; Roberts, Richard; Sloyer, Phyllis; Wells, Nora; Newacheck, Paul

    2007-10-01

    To present a conceptual definition of a family-centered system of services for children and youth with special health care needs (CYSHCN). Previous work by the Maternal and Child Health Bureau to define CYSHCN has had widespread program effects. This article similarly seeks to provide a definition of a system of services. Comprehensive literature review of systems of services and consensus panel organized to review and refine the definition. Policy research group and advisors at multiple sites. Policy researchers, content experts on CYSHCN, family representatives, and state program directors. Definition of a system of services for CYSHCN. This article defines a system of services for CYSHCN as a family-centered network of community-based services designed to promote the healthy development and well-being of these children and their families. The definition can guide discussion among policy makers, practitioners, state programs, researchers, and families for implementing the "community-based systems of services" contained in Title V of the Social Security Act. Critical characteristics of a system include coordination of child and family services, effective communication among providers and the family, family partnership in care provision, and flexibility. This definition provides a conceptual model that can help measurement development and assessment of how well systems work and achieve their goals. Currently available performance objectives for the provision of care for CYSHCN and national surveys of child health could be modified to assess systems of services in general.

  5. Documentation of the Federal Financial System Process at the Defense Finance and Accounting Service Indianapolis Center

    National Research Council Canada - National Science Library

    Gimble, Thomas

    1997-01-01

    .... In September 1994, the Defense Finance and Accounting Service (DFAS) transferred the responsibility for preparing the departmental accounting reports for Department 971 appropriations to the DFAS Indianapolis Center...

  6. Program for establishing long-time flight service performance of composite materials in the center wing structure of C-130 aircraft. Phase 5: flight service and inspection. Final report

    International Nuclear Information System (INIS)

    Kizer, J.A.

    1981-10-01

    Inspections of the C-130 composite-reinforced center wings were conducted over the flight service monitoring period of more than six years. Twelve inspections were conducted on each of the two C-130H airplanes having composite reinforced center wing boxes. Each inspection consisted of visual and ultrasonic inspection of the selective boron-epoxy reinforced center wings which included the inspection of the boron-epoxy laminates and the boron-epoxy reinforcement/aluminum structure adhesive bondlines. During the flight service monitoring period, the two C-130H aircraft accumulated more than 10,000 flight hours and no defects were detected in the inspections over this period. The successful performance of the C-130H aircraft with composite-reinforced center wings allowed the transfer of the responsibilities of inspecting and maintaining these two aircraft to the U. S. Air Force

  7. Prehistory of geophysical service establishment in the National Nuclear Center of the Republic of Kazakhstan

    International Nuclear Information System (INIS)

    Vanchugov, A.G.

    2003-01-01

    To look to the future it is necessary, seeing the present, not to forget the past. Obviously it is important to know 'how was it?', 'in the beginning was the word' - the word of the Ministry of the Republic of Kazakhstan of May 15, 1992 about establishment of the National Nuclear Center of the Republic of Kazakhstan. Originally a geophysical service formed the National Nuclear Center RK as Geophysical Party 35 and Borovoe Geophysical Observatory. (author)

  8. Balanced Scorecards As a Tool for Developing Patient-Centered Pharmacy Services

    Science.gov (United States)

    Enwere, Emmanuel N.; Keating, Ellen A.; Weber, Robert J.

    2014-01-01

    Having accurate data is essential for the pharmacy director to manage the department and develop patient-centered pharmacy services. A balanced scorecard (BSC) of essential department data, which is a broad view of a department’s function beyond its financial performance, is an important part of any department’s strategic plan. This column describes how the pharmacy director builds and promotes a department’s BSC. Specifically, this article reviews how the BSC supports the department’s mission and vision, describes the metrics of the BSC and how they are collected, and recommends how the pharmacy director can effectively use the scorecard results in promoting the pharmacy. If designed properly and updated consistently, a BSC can present a broad view of the pharmacy’s performance, serve as a guide for strategic decision making, and improve on the quality of its services. PMID:24958976

  9. Terrestrial Hydrological Data from NASA's Hydrology Data and Information Services Center (HDISC): Products, Services, and Applications

    Science.gov (United States)

    Fang, Hongliang; Beaudoing, Hiroko K.; Mocko, David M.; Rodell, Matthew; Teng, Bill; Vollmer, Bruce

    2010-01-01

    Terrestrial hydrological variables are important in global hydrology, climate, and carbon cycle studies. The North American and Global Land Data Assimilation Systems (NLDAS and GLDAS, respectively) have been generating a series of land surface states (soil moisture, snow, and temperature) and fluxes (evapotranspiration, radiation, and heat flux) variables. These data, hosted at and available from NASA s Hydrology Data and Information Services Center (HDISC), include the NLDAS hourly 1/8 degree products and the GLDAS 3-hourly 0.25 and 1.0 degree products. HDISC provides easy access and visualization and analysis capabilities for these products, thus reducing the time and resources spent by scientists on data management and facilitating hydrological research. Users can perform spatial and parameter subsetting, data format transformation, and data analysis operations without needing to first download the data. HDISC is continually being developed as a data and services portal that supports weather and climate forecasts, and water and energy cycle research.

  10. Nuclear fuel supply: challenges and opportunities

    International Nuclear Information System (INIS)

    Lowen, S.

    2006-01-01

    Prices of uranium, conversion services and enrichment services have all significantly increased in the last few years. These price increases have generally been driven by a tightening in the supply of these products and services, mostly due to long lead times required to bring these products and services to the market. This paper will describe the various steps in the nuclear fuel cycle for natural and enriched uranium fuel, will discuss the development of the front-end fuel cycle for low void reactivity fuel, and will address the challenges faced in the long-term supply of each component, particularly in the light of potential demand increases as a result of a nuclear renaissance. The opportunities for new capacity and uranium production will be outlined and the process required to achieve sufficient new supply will be discussed. (author)

  11. West Valley facility spent fuel handling, storage, and shipping experience

    International Nuclear Information System (INIS)

    Bailey, W.J.

    1990-11-01

    The result of a study on handling and shipping experience with spent fuel are described in this report. The study was performed by Pacific Northwest Laboratory (PNL) and was jointly sponsored by the US Department of Energy (DOE) and the Electric Power Research Institute (EPRI). The purpose of the study was to document the experience with handling and shipping of relatively old light-water reactor (LWR) fuel that has been in pool storage at the West Valley facility, which is at the Western New York Nuclear Service Center at West Valley, New York and operated by DOE. A subject of particular interest in the study was the behavior of corrosion product deposits (i.e., crud) deposits on spent LWR fuel after long-term pool storage; some evidence of crud loosening has been observed with fuel that was stored for extended periods at the West Valley facility and at other sites. Conclusions associated with the experience to date with old spent fuel that has been stored at the West Valley facility are presented. The conclusions are drawn from these subject areas: a general overview of the West Valley experience, handling of spent fuel, storing of spent fuel, rod consolidation, shipping of spent fuel, crud loosening, and visual inspection. A list of recommendations is provided. 61 refs., 4 figs., 5 tabs

  12. Alternative Fuels Data Center: Missouri Transportation Data for Alternative

    Science.gov (United States)

    stations in Missouri with alternative fuels Fuel Public Private Biodiesel (B20 and above) 1 2 Compressed Students Get Hands-On Training With Biodiesel Missouri High School Students Get Hands-On Training With Biodiesel Feb. 5, 2016 https://youtube.com/embed/p4pVRgoWyZw Video thumbnail for AT&T Fleet Reaches

  13. Alternative Fuels Data Center: Vermont Transportation Data for Alternative

    Science.gov (United States)

    alternative fuels Fuel Public Private Biodiesel (B20 and above) 3 0 Compressed Natural Gas (CNG) 1 2 Electric Recycled Cooking Oil Powers Biodiesel Vehicles in Vermont Recycled Cooking Oil Powers Biodiesel Vehicles in sold per GGE Biodiesel (B20) $2.79/gallon $2.54/GGE $2.84/gallon $2.58/GGE Biodiesel (B99-B100) $2.47

  14. Transit experience with hydrogen fueled hybrid electric buses

    International Nuclear Information System (INIS)

    Scott, P.B.; Mazaika, D.M.; Levin, J.; Edwards, T.

    2006-01-01

    Both AC Transit and SunLine Transit operate hybrid electric hydrogen fueled buses in their transit service. ACT presently operates three fuel cell buses in daily revenue service, and SunLine operates a fuel cell bus and a HHICE (Hybrid Hydrogen Internal Combustion Engine) bus. All these buses use similar electric drive train and electric accessories, although the detailed design differs notably between the fuel cell and the hybrid ICE buses. The fuel cell buses use a 120kW UTC fuel cell and a Van Hool Chassis, whereas the HHICE bus uses a turbocharged Ford engine which is capable of 140kW generator output in a New Flyer Chassis. The HHICE bus was the first in service, and has been subjected to both winter testing in Manitoba, Canada and summer testing in the Palm Springs, CA region. The winter testing included passenger sampling using questionnaires to ascertain passenger response. The fuel cell buses were introduced to service at the start of 2006. All five buses are in daily revenue service use. The paper will describe the buses and the experience of the transit properties in operating the buses. (author)

  15. Alternative Fuels Data Center: Ten Ways You Can Implement Alternative Fuels

    Science.gov (United States)

    heavy-duty vehicle with a Clean Cities decal affixed to it. Connect with Clean Cities If you're looking Energy's Clean Cities program has nearly 100 local coalitions of fleets, fuel providers, businesses Honolulu to Houston to Hartford. Tap into an unbeatable source of transportation know-how and networking by

  16. National fuel cell bus program : proterra fuel cell hybrid bus report, Columbia demonstration.

    Science.gov (United States)

    2011-10-01

    This report summarizes the experience and early results from a fuel cell bus demonstration funded by the Federal Transit Administration (FTA) under the National Fuel Cell Bus Program. A team led by the Center for Transportation and the Environment an...

  17. Mox fuels recycling

    International Nuclear Information System (INIS)

    Gay, A.

    1998-01-01

    This paper will firstly emphasis that the first recycling of plutonium is already an industrial reality in France thanks to the high degree of performance of La Hague and MELOX COGEMA's plants. Secondly, recycling of spent Mixed OXide fuel, as a complete MOX fuel cycle, will be demonstrated through the ability of the existing plants and services which have been designed to proceed with such fuels. Each step of the MOX fuel cycle concept will be presented: transportation, reception and storage at La Hague and steps of spent MOX fuel reprocessing. (author)

  18. LINKING CLASSROOM AND COMMUNITY: A THEORETICAL ALIGNMENT OF SERVICE LEARNING AND A HUMAN-CENTERED DESIGN METHODOLOGY IN CONTEMPORARY COMMUNICATION DESIGN EDUCATION

    Directory of Open Access Journals (Sweden)

    Anneli Bowie

    2016-04-01

    Full Text Available The current emphasis on social responsibility and community collaboration within higher education has led to an increased drive to include service learning in the curriculum. With its emphasis on mutually beneficial collaborations, service learning can be meaningful for both students and the community, but is challenging to manage successfully. From a design education perspective, it is interesting to note that contemporary design practice emphasises a similar approach known as a human-centered design, where users are considered and included throughout the design process. In considering both service learning and human-centred design as foundations for design pedagogy, various philosophical and methodological similarities are evident. The paper explores the relationship between a service learning community engagement approach and a human-centered design approach in contemporary communication design education. To this end, each approach is considered individually after which a joint frame of reference is presented. Butin’s service learning typology, namely the four Rs – respect, reciprocity, relevance and reflection – serves as a point of departure for the joint frame of reference. Lastly, the potential value and relevance of a combined understanding of service learning and human-centered design is considered.

  19. Predicting fuel performance for SP-100 conditions

    International Nuclear Information System (INIS)

    Baars, R.E.

    1985-01-01

    This paper reports on methods for analyzing fuel designs proposed for the thermionic and thermoelectric concepts for SP-100 application. The proposed fuel design for the thermionic concept consisted of fully-enriched oxide fuel clad in chemical vapor deposition (CVD) tungsten, which also served as the emitter for the thermionic fuel element (TFE). The fuel density was 95% of theoretical with the linear heat rate flattened radially by removing fuel from the center of the fuel pellet. The fuel inner diameter varied from approx.0.45 in. at the core center to zero at the edge of the core. The as-fabricated gap between fuel and emitter was 10 mils radial. The emitter thickness was 80 mils, and the outer diameter was 1.099 in. The LIFE-4 code was used for evaluation of this concept after extensive review of the code and development of a procedure that corrects certain deficiencies noted in analysis of several tests

  20. Nuclear fuel

    International Nuclear Information System (INIS)

    Azevedo, J.B.L. de.

    1980-01-01

    All stages of nuclear fuel cycle are analysed with respect to the present situation and future perspectives of supply and demand of services; the prices and the unitary cost estimation of these stages for the international fuel market are also mentioned. From the world resources and projections of uranium consumption, medium-and long term analyses are made of fuel availability for several strategies of use of different reactor types. Finally, the cost of nuclear fuel in the generation of electric energy is calculated to be used in the energetic planning of the electric sector. (M.A.) [pt

  1. NASA Space Weather Center Services: Potential for Space Weather Research

    Science.gov (United States)

    Zheng, Yihua; Kuznetsova, Masha; Pulkkinen, Antti; Taktakishvili, A.; Mays, M. L.; Chulaki, A.; Lee, H.; Hesse, M.

    2012-01-01

    The NASA Space Weather Center's primary objective is to provide the latest space weather information and forecasting for NASA's robotic missions and its partners and to bring space weather knowledge to the public. At the same time, the tools and services it possesses can be invaluable for research purposes. Here we show how our archive and real-time modeling of space weather events can aid research in a variety of ways, with different classification criteria. We will list and discuss major CME events, major geomagnetic storms, and major SEP events that occurred during the years 2010 - 2012. Highlights of major tools/resources will be provided.

  2. Safe and reliable fuel solutions

    International Nuclear Information System (INIS)

    2013-01-01

    Published by AREVA, this booklet highlights the main aspects regarding fuel-related activities within this company. It outlines the efforts to improve all the involved processes, briefly describes the components and structure of fuel assemblies, gives an overview of Areva's different activities related to nuclear fuels (design, variety of products, fabrication, services). It outlines the relationship with the client for each of these activities, briefly describes the different parts of a fuel assembly for a PWR, outlines the importance given to quality for the fabrication processes, and indicates the different services provided by AREVA to its clients (handling, maintenance, controls, inspection, repair, training, etc.)

  3. Awareness and pattern of utilizing family planning services among women attending urban health care center Azizabad Sukkur

    International Nuclear Information System (INIS)

    Shah, N.A.; Nisar, N.

    2008-01-01

    To assess level of awareness and pattern of utilizing family planning services among women (15-49 years) of reproductive age at Urban Health Center, Azizabad Sukkur, Sindh. A cross-sectional study was conducted from April to June 2005 at Urban Health Care Center Azizabad Sukkur. Two hundred women of reproductive age group were interviewed by using a pre tested semi structured questionnaire visiting the health care center during the study period. Information was obtained after taking informed consent regarding socio demographic characteristics, knowledge, attitude and pattern of utilizing family planning services. The data was entered and analyzed by using statistical package SPSS version 13. About 75% of women and 42.5% husbands were found illiterate, 85% women were housewives, 69.5% were married before 18 years of age and 54% had nuclear family. Regarding desired number of children women responded one child (3%), 2-3 children (11%), 4-5 (37.5%), more than five children (36%), 5.5% said that children are God gifted and 7% did not answer. About 60% of women reported use of at least one contraceptive method and 40% had never used any contraceptive method. The women who received counseling from the health care provider were 48.5% and only 6% received information through media. Religious prohibition, shortage of female staff and cost of family planning contraceptive methods were the main reasons identified for not utilizing contraceptive methods. The unsatisfactory variables were long waiting hours at the center, non-availability of contraceptive, shortage of the female staff and cost. Limited number of women was aware and practice contraception in the area and utilization of family planning services were low. The efforts should be made for providing information to couple and improving quality of family planning services in the area. (author)

  4. NRC committee on assessment of technologies for improving fuel economy of light-duty vehicles: Meeting with DOT Volpe Center staff - February 27, 2013

    Science.gov (United States)

    2013-02-27

    On February 27, 2013 National Research Council's Committee on Fuel Economy of Light-Duty Vehicles, Phase 2 held a meeting at the John A. Volpe National Transportation Systems Center on the Volpe Model and Other CAFE Issues. The meeting objectives wer...

  5. Alternative Fuels Data Center: Alaska Transportation Data for Alternative

    Science.gov (United States)

    fuels Fuel Public Private Biodiesel (B20 and above) 0 0 Compressed Natural Gas (CNG) 1 0 Electric 8 0 Coast Region National Average per unit sold per GGE per unit sold per GGE Biodiesel (B20) $3.01/gallon $2.74/GGE $2.84/gallon $2.58/GGE Biodiesel (B99-B100) $3.61/gallon $3.57/GGE $3.48/gallon $3.45/GGE

  6. Meet the Maximally Exposed Member of the Public: The Service Station Attendant for Spent Nuclear Fuel Going to Yucca Mountain

    International Nuclear Information System (INIS)

    Collins, H. E.; Gathers, R.; Halstead, R. J.

    2002-01-01

    According to the 1999 Draft Environmental Impact Statement (DEIS) for the proposed Yucca Mountain repository site, members of the public along transportation routes by which spent nuclear fuel (SNF) and high-level radioactive waste (HLW) is shipped will receive annual radiation doses less than 100 mrem/yr, the international (ICRP) and national (Department of Energy, Nuclear Regulatory Commission) radiation limit for members of the public. For the ''Mostly Truck'' national transportation scenario, the DEIS specifically concludes that the maximally exposed member of the public, a service station attendant along the primary shipping route will receive no more than 100 mrem/yr, or 2.4 rem over 24 years. Based on the assumptions in the DEIS scenarios, however, it is highly likely that service station attendants along shipping routes will be called upon to fuel and service the rigs carrying SNF and HLW to Yucca Mountain. After reevaluating the DEIS, and making realistic alternative assumptions where necessary, the authors conclude that these attendants are likely to receive substantially more than 100 mrem/yr external dose, and perhaps several times that dose (up to 500 mrem/yr), unless mitigating measures are adopted. This is particularly true in Western states where refueling opportunities are limited, and the distances between fuel sources in rural areas may be up to 100 miles

  7. Technology Information Center

    International Nuclear Information System (INIS)

    Emerson, E.L.; Shepherd, E.W.; Minor, E.E.

    1980-01-01

    A Transportation Technology Center (TTC) has been established at Sandia to address the transportation of nuclear waste and spent fuel. The Technology Information Center (TIC) acts as TTC's clearing house for nuclear material transportation information. TIC's activities are divided into three activities: public information, policy information, and technical information. Some of the uses of TIC's activities are briefly outlined

  8. Fuels planning: science synthesis and integration; fact sheet: The Fuels Synthesis Project overview

    Science.gov (United States)

    Rocky Mountain Research Station USDA Forest Service

    2004-01-01

    The geographic focus of the "Fuels Planning: Science Synthesis and Integration" project #known as the Fuels Synthesis Project# is on the dry forests of the Western United States. Target audiences include fuels management specialists, resource specialists, National Environmental Policy Act #NEPA# planning team leaders, line officers in the USDA Forest Service...

  9. Analysis of Gap in Service Quality in Drug Addiction Treatment Centers of Kerman, Iran, Using SERVQUAL Model.

    Science.gov (United States)

    Naqavi, Mohammad Reza; Refaiee, Raheleh; Baneshi, Mohammad Reza; Nakhaee, Nouzar

    2014-01-01

    Treatment of drug addicts is one of the main strategies of drug control in Iran. Client satisfaction strongly influences the success of any treatment program. This study aimed to explore the difference between customer expectations and perceptions in drug addiction treatment centers of Kerman, Iran, using SERVQUAL model. Using a cross-sectional design 260 clients referring to drug addiction treatment centers of Kerman, were enrolled in 2012. From among 84 clinics, 20 centers were selected randomly. Based on the number of clients registered in each center, a random sample proportional to the size was selected and 290 subjects were invited for interviews. A well validated 22-item questionnaire, which measured the 5 dimensions of service quality (reliability, assurance, tangibility, empathy, and responsiveness), was completed by participants. Each item measured 2 aspects of service quality; expectations and perceptions. Mean ± SD (Standard deviation) age of the subjects was 37.7 ± 9.4. Most of them were male (87.7%). Less than half of them had an educational level lower than diploma. The total score of clients` expectations was higher than their perceptions (P addiction treatment clinics.

  10. Eco-technology service station: the future of gas station; Posto eco-tecnologico: o posto do futuro

    Energy Technology Data Exchange (ETDEWEB)

    Moura, Newton R. [PETROBRAS, Rio de Janeiro, RJ (Brazil); Daher, Humberto Antonio S. [PETROBRAS Distribuidora, Rio de Janeiro, RJ (Brazil)

    2004-07-01

    PETROBRAS Distribuidora and CENPES have a project to build an eco-technology service station at Ilha do Fundao, to know new technologies for vehicle fuelling, test of new vehicle natural gas compression system, and start projects with new fuels that are not available at Brazilian market. This service station concept shall be aligned with sustainability premise that are being established for both companies, that means, besides a technology focus, it shall have a social focus without any environment damage. PETROBRAS 'Board of Directors approved the expansion of PETROBRAS' Research and Development Center (CENPES) installations, including this service station construction. Some activities that will be developed at the service station are pointed out here: available of new natural gas compression system; micro-generation with micro turbine, fuel cell; and photo-voltaic cell technologies; hydrogen fuelling; oil-water system treatment; biodiesel fuelling. This station will have a show room opened to the public, with panels, videos and a CNG compressor in cut. (author)

  11. Alternative Fuels Data Center: Federal Laws and Incentives for Ethanol

    Science.gov (United States)

    the Office of Management and Budget with opportunities to optimize federal fleet performance, reduce improvements, travel demand management strategies, congestion relief efforts (such as high occupancy vehicle advanced vehicles, fuel blends, fuel economy, hybrid vehicles, and idle reduction. Clean Cities provides

  12. Securing the nuclear fuel cycle: What next?

    International Nuclear Information System (INIS)

    Ruchkin, S.V.; Loginov, V.Y.

    2006-01-01

    international levels. The article is outlining what has been done in this area since then, and what are the prospects for development of multilateral approaches in the use of nuclear energy. One of the instruments to enhance the security of supply of NFC products and services suggested in the experts' report is reinforcement of existing market mechanisms. In this connection it looked quite logical for the World Nuclear Association (WNA) to set up, in August 2005, a dedicated working group comprising experts from the world nuclear industry. Representatives of the four leading world uranium enrichment services suppliers were in the group: AREVA (France), TENEX (Russia), URENCO (Germany, the Netherlands and UK), and USEC (US). As a result, in May 2006, the WNA produced a report entitled 'Ensuring Security of Supply in the International Nuclear Fuel Cycle' (see WNA website at www.world-nuclear.org/security.pdf). The report's most important highlights are discussed. .In September 2005, the six enrichment services supplier-States, under the leadership of the US, set up an intergovernmental working group to develop a multilateral mechanism for reliable access to nuclear fuel (RANF). The group presented its proposal to IAEA Member States in June 2006 and consultations continue on the next steps regarding their offer, under certain conditions, to provide low enriched uranium to States not pursuing sensitive nuclear activities. On 25 January, 2006 Russian President Vladimir Putin announced an initiative to develop a Global Nuclear Power Infrastructure (GNPI) capable of providing secured and non-discriminatory (equal) access to the benefits of nuclear energy to all interested countries in strict compliance with non-proliferation requirements. Establishment of a network of international NFC centers (INFCC), including enrichment services, under IAEA safeguards will become a key element of such an infrastructure. The GNPI-INFCC initiative is aimed primarily at countries who are developing

  13. Environmental management systems tools applied to the nuclear fuel center of IPEN

    International Nuclear Information System (INIS)

    Mattos, Luis A. Terribile de; Meldonian, Nelson Leon; Madi Filho, Tufic

    2013-01-01

    This work aims to identify and classify the major environmental aspects and impacts related to the operation of the Nuclear Fuel Center of IPEN (CCN), through a systematic survey data, using interviews questions and consulting of licensing documents and operational records. First, the facility processes and activities, and the interactions between these processes were identified. Then, an analysis of potential failures and their probable causes was conducted to establish the significance of environmental aspects, as well as the operational controls, which are necessary to ensure the prevention of impacts on the environment. The results obtained so far demonstrate the validity of this study as a tool for identification of environmental aspects and impacts of nuclear facilities in general, as a way to achieving compliance with the ISO 14001:2004 standard. Moreover, it can serve as an auxiliary method for resolving issues related to the attendance of applicable regulatory and legal requirements of National Nuclear Energy Commission (CNEN) and Brazilian Institute of Environment (IBAMA). (author)

  14. Environmental management systems tools applied to the nuclear fuel center of IPEN

    Energy Technology Data Exchange (ETDEWEB)

    Mattos, Luis A. Terribile de; Meldonian, Nelson Leon; Madi Filho, Tufic, E-mail: mattos@ipen.br, E-mail: meldonia@ipen.br, E-mail: tmfilho@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2013-07-01

    This work aims to identify and classify the major environmental aspects and impacts related to the operation of the Nuclear Fuel Center of IPEN (CCN), through a systematic survey data, using interviews questions and consulting of licensing documents and operational records. First, the facility processes and activities, and the interactions between these processes were identified. Then, an analysis of potential failures and their probable causes was conducted to establish the significance of environmental aspects, as well as the operational controls, which are necessary to ensure the prevention of impacts on the environment. The results obtained so far demonstrate the validity of this study as a tool for identification of environmental aspects and impacts of nuclear facilities in general, as a way to achieving compliance with the ISO 14001:2004 standard. Moreover, it can serve as an auxiliary method for resolving issues related to the attendance of applicable regulatory and legal requirements of National Nuclear Energy Commission (CNEN) and Brazilian Institute of Environment (IBAMA). (author)

  15. Inert matrix fuel in dispersion type fuel elements

    Energy Technology Data Exchange (ETDEWEB)

    Savchenko, A.M. [A.A. Bochvar All-Russia Research Institute of Inorganic Materials (VNIINM) 123060, P.O. Box 369, Rogova Street, 5A, Moscow (Russian Federation)]. E-mail: sav@bochvar.ru; Vatulin, A.V. [A.A. Bochvar All-Russia Research Institute of Inorganic Materials (VNIINM) 123060, P.O. Box 369, Rogova Street, 5A, Moscow (Russian Federation); Morozov, A.V. [A.A. Bochvar All-Russia Research Institute of Inorganic Materials (VNIINM) 123060, P.O. Box 369, Rogova Street, 5A, Moscow (Russian Federation); Sirotin, V.L. [A.A. Bochvar All-Russia Research Institute of Inorganic Materials (VNIINM) 123060, P.O. Box 369, Rogova Street, 5A, Moscow (Russian Federation); Dobrikova, I.V. [A.A. Bochvar All-Russia Research Institute of Inorganic Materials (VNIINM) 123060, P.O. Box 369, Rogova Street, 5A, Moscow (Russian Federation); Kulakov, G.V. [A.A. Bochvar All-Russia Research Institute of Inorganic Materials (VNIINM) 123060, P.O. Box 369, Rogova Street, 5A, Moscow (Russian Federation); Ershov, S.A. [A.A. Bochvar All-Russia Research Institute of Inorganic Materials (VNIINM) 123060, P.O. Box 369, Rogova Street, 5A, Moscow (Russian Federation); Kostomarov, V.P. [A.A. Bochvar All-Russia Research Institute of Inorganic Materials (VNIINM) 123060, P.O. Box 369, Rogova Street, 5A, Moscow (Russian Federation); Stelyuk, Y.I. [A.A. Bochvar All-Russia Research Institute of Inorganic Materials (VNIINM) 123060, P.O. Box 369, Rogova Street, 5A, Moscow (Russian Federation)

    2006-06-30

    The advantages of using inert matrix fuel (IMF) as a dispersion fuel in an aluminium alloy matrix are considered, in particular, low temperatures in the fuel centre, achievable high burn-ups, serviceability in transients and an environmentally friendly process of fuel rod fabrication. Two main versions of IMF are under development at A.A. Bochvar Institute, i.e. heterogeneous or isolated distribution of plutonium. The out-of-pile results on IMF loaded with uranium dioxide as plutonium simulator are presented. Fuel elements with uranium dioxide composition fabricated at A.A. Bochvar Institute are currently under MIR tests (RIAR, Dimitrovgrad). The fuel elements reached a burn-up of 88 MW d kg{sup -1} (equivalent to the burn up of the standard uranium dioxide pelletized fuel) without loss of leak-tightness of the cladding. The feasibility of fabricating IMF of these particular types with plutonium dioxide is considered with a view to in-pile irradiation.

  16. Inert matrix fuel in dispersion type fuel elements

    Science.gov (United States)

    Savchenko, A. M.; Vatulin, A. V.; Morozov, A. V.; Sirotin, V. L.; Dobrikova, I. V.; Kulakov, G. V.; Ershov, S. A.; Kostomarov, V. P.; Stelyuk, Y. I.

    2006-06-01

    The advantages of using inert matrix fuel (IMF) as a dispersion fuel in an aluminium alloy matrix are considered, in particular, low temperatures in the fuel centre, achievable high burn-ups, serviceability in transients and an environmentally friendly process of fuel rod fabrication. Two main versions of IMF are under development at A.A. Bochvar Institute, i.e. heterogeneous or isolated distribution of plutonium. The out-of-pile results on IMF loaded with uranium dioxide as plutonium simulator are presented. Fuel elements with uranium dioxide composition fabricated at A.A. Bochvar Institute are currently under MIR tests (RIAR, Dimitrovgrad). The fuel elements reached a burn-up of 88 MW d kg-1 (equivalent to the burn up of the standard uranium dioxide pelletized fuel) without loss of leak-tightness of the cladding. The feasibility of fabricating IMF of these particular types with plutonium dioxide is considered with a view to in-pile irradiation.

  17. Alternative Fuels Data Center: How Do Bi-fuel Natural Gas Vehicles Work?

    Science.gov (United States)

    power vehicle electronics/accessories. Electronic control module (ECM) - (gasoline): The ECM controls ; safeguards the engine from abuse; and detects and troubleshoots problems. Electronic control module (ECM sensors: These monitor the pressure of the fuel supply and relay that information to the electronic

  18. Part 6. Internationalization and collocation of FBR fuel cycle facilities

    International Nuclear Information System (INIS)

    Stevenson, M.G.; Abramson, P.B.; LeSage, L.G.

    1980-01-01

    This report examines some of the non-proliferation, technical, and institutional aspects of internationalization and/or collocation of major facilities of the Fast Breeder Reactor (FBR) fuel cycle. The national incentives and disincentives for establishment of FBR Fuel Cycle Centers are enumerated. The technical, legal, and administrative considerations in determining the feasibility of FBR Fuel Cycle Centers are addressed by making comparisons with Light Water Reactor (LWR) centers which have been studied in detail by the IAEA and UNSRC

  19. VVER fuel. Results of post irradiation examination

    International Nuclear Information System (INIS)

    Smirnov, V.P.; Markov, D.V.; Smirnov, A.V.; Polenok, V.S.; Perepelkin, S.O.; Ivashchenko, A.A.

    2005-01-01

    The present paper presents the main results of post-irradiation examination of more than 40 different fuel assemblies (FA) operated in the cores of VVER-1000 and VVER-440-type power reactors in a wide range of fuel burnup. The condition of fuel assembly components from the viewpoint of deformation, corrosion resistance and mechanical properties is described here. A serviceability of the FA design as a whole and interaction between individual FA components under vibration condition and mechanical load received primary emphasis. The reasons of FA damage fuel element failure in a wide range of fuel burnup are also analyzed. A possibility and ways of fuel burnup increase have been proved experimentally for the case of high-level serviceability maintenance of fuel elements to provide for advanced fuel cycles. (author)

  20. Rokkasho visitors center and the status of its activities

    International Nuclear Information System (INIS)

    Sato, T.; Mochizuki, H.

    1993-01-01

    The Rokkasho Visitors Center was built as a base for furthering the understanding of a large number of people, mainly Aomori Prefecture residents, of the Nuclear Fuel Cycle Project. The Center plays a key role in transmitting various information concerning the nuclear fuel cycle. The Visitors Center introduces in a simple manner the role and system of the nuclear fuel cycle by featuring various exhibits using electronics, graphic presentations and actual-size models. It also serves as a forum for communication with local communities and corporations. The Center has already attracted roughly 140 000 visitors in the year since its opening. Thus, it is fulfilling the objectives set in the beginning and giving shape to one form of nuclear energy public relations. (author)

  1. THE RATIONALE FOR EXTENDING THE SERVICES OF PASSENGER CARS WITH POCKETS OF CORROSION IN THE CENTER SILL

    Directory of Open Access Journals (Sweden)

    S. V. Myamlin

    2015-09-01

    Full Text Available Purpose. The scientific work supposed: 1 the search of accounting ways of the local corrosion damages influence to the car design, that were expired the appointed time, for the purpose of renewal; 2 experimental verification of conformity of material construction requirements of the normative documentation and justification for extending the services of passenger cars with pockets of corrosion after 30 years of operation; 3 the conformity assessment of residual life of the structure of car bodies operating pressures in the next 5 years of use. Methodology. The developed algorithm of technical diagnostics of cars with pockets of corrosion of the center sill contains several stages. First, a survey of technical condition of structures is conducted by a visual-optical method and nondestructive control methods, and the degree of damage is determined. In the next phase the experimental verification of conformity of the structure and mechanical properties of the center sill of the car with the pockets of corrosion to regulatory requirements are executed. Next, the study of strength of the supporting structures of car bodies on the basis of experimental static and impact tests of strength is executed. Finally, the endurance tests are conducted on the effect of the longitudinal forces and the evaluation and prediction of compliance resource car bodies for the next period are executed. Findings. The actual work is completed by obtaining the experimental data on the feasibility of extending the service life of passenger cars as from the point of view of an operating time of load-bearing elements of the car body to the resource, and from the point of view of chemical composition, structure and mechanical properties of the center sill with pockets of corrosion. The presence of local corrosion damages of the center sill of the presented size is not a threat to the structural strength and safety. Originality. The authors conducted a comprehensive study to

  2. Alternative Fuels Data Center: Federal Laws and Incentives for Electricity

    Science.gov (United States)

    and 49 U.S. Code 47136a) Advanced Technology Vehicle (ATV) and Alternative Fuel Infrastructure Manufacturing Loan Program website and the Alternative Fuel Infrastructure fact sheet. (Reference 42 U.S. Code vehicles and infrastructure. Projects supported with CMAQ funds must demonstrate emissions reductions, be

  3. Nuclear fuel quality assurance

    International Nuclear Information System (INIS)

    1976-01-01

    Full text: Quality assurance is used extensively in the design, construction and operation of nuclear power plants. This methodology is applied to all activities affecting the quality of a nuclear power plant in order to obtain confidence that an item or a facility will perform satisfactorily in service. Although the achievement of quality is the responsibility of all parties participating in a nuclear power project, establishment and implementation of the quality assurance programme for the whole plant is a main responsibility of the plant owner. For the plant owner, the main concern is to achieve control over the quality of purchased products or services through contractual arrangements with the vendors. In the case of purchase of nuclear fuel, the application of quality assurance might be faced with several difficulties because of the lack of standardization in nuclear fuel and the proprietary information of the fuel manufacturers on fuel design specifications and fuel manufacturing procedures. The problems of quality assurance for purchase of nuclear fuel were discussed in detail during the seminar. Due to the lack of generally acceptable standards, the successful application of the quality assurance concept to the procurement of fuel depends on how much information can be provided by the fuel manufacturer to the utility which is purchasing fuel, and in what form and how early this information can be provided. The extent of information transfer is basically set out in the individual vendor-utility contracts, with some indirect influence from the requirements of regulatory bodies. Any conflict that exists appears to come from utilities which desire more extensive control over the product they are buying. There is a reluctance on the part of vendors to permit close insight of the purchasers into their design and manufacturing procedures, but there nevertheless seems to be an increasing trend towards release of more information to the purchasers. It appears that

  4. Supply guarantee initiatives for nuclear fuel materials and services and their compatibility with the market. Present discussions and future prospects

    International Nuclear Information System (INIS)

    Nagano, Koji

    2008-01-01

    Under the weakening NPT (Non-Proliferation Treaty) regime, a number of proposals and initiatives for nuclear fuel supply assurance and guarantee mechanisms have been brought on the agenda of international discussions and negotiations. This report first discusses where and why those ideas came out, and then turn to the current situations of markets of nuclear fuel materials and services in terms of degree of market concentration to specific suppliers. Based on those observations, the author attempts to draw a comparison among the proposed schemes in order to examine possible steps for forward that pose least possible influences adverse to the individual markets and thereby could better attract possible recipient states' interests. The report suggests that those initiatives are classified in three types; a) physical assurance, i.e. specific nation(s) and/or entit(-y/-ies) prepare dedicated reserve of materials and/or service capacities for the purpose of supply assurance; b) collective assurance, i.e. a group of nations and/or entities collectively submit their excess materials and service capacities when assurance is activated; and c) financial measures. In view of their feasibility, a two-step approach might be found practical to implement and promote; i.e. 1) in a short-run, a 'soft' scheme which never interferes NPT signatories' right of peaceful development and use of nuclear power could be set and implemented, and 2) in a long-run, R and D efforts should be undertaken to create such a sufficient economic margin that potential recipient states may lose justification of self-development of nuclear fuel cycle technologies and businesses when compared with those services provided by foreign sources attached with a sufficient degree of supply assurances. (author)

  5. Final environmental impact statement: US Spent Fuel Policy. Charge for spent fuel storage

    International Nuclear Information System (INIS)

    1980-05-01

    The United States Government policy relating to nuclear fuel reprocessing, which was announced by President Carter on April 7, 1977, provides for an indefinite deferral of reprocessing, and thus commits light water reactor (LWR) plants to a once-through fuel cycle during that indefinite period. In a subsequent action implementing that policy, the Department of Energy (DOE) on October 18, 1977 announced a spent fuel policy which would enable domestic, and on a selective basis, foreign utilities to deliver spent fuel to the US Government for interim storage and final geologic disposal, and pay the Government a fee for such services. This volume addresses itself to whether the fee charged for these services, by its level or its structure, would have any effect on the environmental impacts of implementing the Spent Fuel Policy itself. This volume thus analyzes the fee and various alternatives to determine the interaction between the fee and the degree of participation by domestic utilities and foreign countries in the proposed spent fuel program for implementing the Spent Fuel Policy. It also analyzes the effect, if any, of the fee on the growth of nuclear power

  6. Optimizing Data Center Services to Foster Stewardship and Use of Geospatial Data by Heterogeneous Populations of Users

    Science.gov (United States)

    Downs, R. R.; Chen, R. S.; de Sherbinin, A. M.

    2017-12-01

    Growing recognition of the importance of sharing scientific data more widely and openly has refocused attention on the state of data repositories, including both discipline- or topic-oriented data centers and institutional repositories. Data creators often have several alternatives for depositing and disseminating their natural, social, health, or engineering science data. In selecting a repository for their data, data creators and other stakeholders such as their funding agencies may wish to consider the user community or communities served, the type and quality of data products already offered, and the degree of data stewardship and associated services provided. Some data repositories serve general communities, e.g., those in their host institution or region, whereas others tailor their services to particular scientific disciplines or topical areas. Some repositories are selective when acquiring data and conduct extensive curation and reviews to ensure that data products meet quality standards. Many repositories have secured credentials and established a track record for providing trustworthy, high quality data and services. The NASA Socioeconomic Data and Applications Center (SEDAC) serves users interested in human-environment interactions, including researchers, students, and applied users from diverse sectors. SEDAC is selective when choosing data for dissemination, conducting several reviews of data products and services prior to release. SEDAC works with data producers to continually improve the quality of its open data products and services. As a Distributed Active Archive Center (DAAC) of the NASA Earth Observing System Data and Information System, SEDAC is committed to improving the accessibility, interoperability, and usability of its data in conjunction with data available from other DAACs, as well as other relevant data sources. SEDAC is certified as a Regular Member of the International Council for Science World Data System (ICSU-WDS).

  7. iRODS-Based Climate Data Services and Virtualization-as-a-Service in the NASA Center for Climate Simulation

    Science.gov (United States)

    Schnase, J. L.; Duffy, D. Q.; Tamkin, G. S.; Strong, S.; Ripley, D.; Gill, R.; Sinno, S. S.; Shen, Y.; Carriere, L. E.; Brieger, L.; Moore, R.; Rajasekar, A.; Schroeder, W.; Wan, M.

    2011-12-01

    Scientific data services are becoming an important part of the NASA Center for Climate Simulation's mission. Our technological response to this expanding role is built around the concept of specialized virtual climate data servers, repetitive cloud provisioning, image-based deployment and distribution, and virtualization-as-a-service. A virtual climate data server is an OAIS-compliant, iRODS-based data server designed to support a particular type of scientific data collection. iRODS is data grid middleware that provides policy-based control over collection-building, managing, querying, accessing, and preserving large scientific data sets. We have developed prototype vCDSs to manage NetCDF, HDF, and GeoTIF data products. We use RPM scripts to build vCDS images in our local computing environment, our local Virtual Machine Environment, NASA's Nebula Cloud Services, and Amazon's Elastic Compute Cloud. Once provisioned into these virtualized resources, multiple vCDSs can use iRODS's federation and realized object capabilities to create an integrated ecosystem of data servers that can scale and adapt to changing requirements. This approach enables platform- or software-as-a-service deployment of the vCDSs and allows the NCCS to offer virtualization-as-a-service, a capacity to respond in an agile way to new customer requests for data services, and a path for migrating existing services into the cloud. We have registered MODIS Atmosphere data products in a vCDS that contains 54 million registered files, 630TB of data, and over 300 million metadata values. We are now assembling IPCC AR5 data into a production vCDS that will provide the platform upon which NCCS's Earth System Grid (ESG) node publishes to the extended science community. In this talk, we describe our approach, experiences, lessons learned, and plans for the future.

  8. Re-irradiation and limit testing of the fuels PWR type reactors

    International Nuclear Information System (INIS)

    Roche, M.; Molvault, M.

    1978-01-01

    In view of investigating the neutron radiation behavior of PWR fuel pins, the S.P.S. (Services des Piles de Saclay) developed a set of experimental means used at OSIRIS in Saclay Nuclear Research Center. Said devices are shown to be able to meet present problems concerning can failures, power and temperature cycling, remote-control studies. These means can also be used either for statistical studies, they can then receive several samples, or for analytical studies in instrumented devices of large capacity and accelerated irradiation rate [fr

  9. Social accountability and education revives health sub-centers in India and increases access to family planning services

    Directory of Open Access Journals (Sweden)

    Susan Otchere

    2017-01-01

    Full Text Available Background: Uttar Pradesh (UP is the most populous state in India. The maternal mortality ratio, infant mortality rate, and fertility rates are all higher than the national average. Sixty percent of UP inhabitants live in rural communities. The reasons behind the poor state of health and services in many areas of UP are inadequate knowledge and availability in communities of healthy behaviors, and information on available government health services. Methods: World Vision, Inc. implemented a three-and-half year mobilizing plan for maternal and neonatal health through a birth spacing and advocacy project (MOMENT, partnering with local organizations in rural Hardoi and urban slums of Lucknow districts in UP. World Vision used print, audio, visual media, and house-to-house contacts to educate communities on timing and spacing of pregnancies; and the benefits of seeking and using maternal and child health services (MCH including immunization and family planning (FP.This paper focuses on World Vision’s social accountability strategy – Citizen Voice and Action (CVA and interface meetings – used in Hardoi that helped educate and empower Village Health Sanitation and Nutrition Committees (VHSNCs and village leaders to access government untied funds to improve community social and health services. Results: Forty VHSNCs were revived in 24 months. Nine local leaders accessed government untied funds. In addition, increased knowledge of the benefits of timing and spacing of pregnancies, maternal child health, family planning services, and access to community entitlements led the community to embrace and contribute their time to rebuild and re-open 17 non-functional Auxiliary Nurse Midwife (ANM sub-centers. Seventeen ANMs received refresher training to provide quality care. Sub-center data showed that 1,121 and 3,156 women opted for intra-uterine contraceptive device and oral pills, respectively, and 29,316 condoms were distributed. Conclusion: In Hardoi

  10. The National Center For Hydrogen And Fuel Cells. Jump-starting the hydrogen economy through research

    International Nuclear Information System (INIS)

    Stefanescu, Ioan; Varlam, Mihai; Carcadea, Elena

    2010-01-01

    Full text: The research, design and implementation of hydrogen-based economy must consider each of the segments of the hydrogen energy system - production, supply, storage, conversion. The National Center for Hydrogen and Fuel Cells has the experience, expertise, facilities and instrumentation necessary to have a key role in developing any aspect of hydrogen-based economy, aiming to integrate technologies for producing and using hydrogen as an 'energy vector'. This paper presents a simulation of the applied 'learning curve' concept, NCHFC being the key element of R and D in the field in comparing the costs involved. It also presents the short and medium term research program of NCHFC, the main research and development directions being specified. (authors)

  11. Fuel cells for commercial energy

    Science.gov (United States)

    Huppmann, Gerhard; Weisse, Eckart; Bischoff, Manfred

    1990-04-01

    The development of various types of fuel cells is described. Advantges and drawbacks are considered for alkaline fuel cells, phosphoric acid fuel cells, and molten carbonate fuel cells. It is shown that their modular construction is particularly adapted to power heat systems. A comparison which is largely in favor of fuel cells, is made between coal, oil, natural gas power stations, and fuel cells. Safety risks in operation are also compared with those of conventional power stations. Fuel cells are particularly suited for dwellings, shopping centers, swimming pools, other sporting installations, and research facilities, whose high current and heat requirements can be covered by power heat coupling.

  12. Summary of the seismic analyses of the Nuclear Fuel Services Reprocessing Plant at West Valley, New York

    International Nuclear Information System (INIS)

    Endebrock, E.G.

    1978-03-01

    Results are presented from the seismic investigations of the Nuclear Fuel Services Fuel Reprocessing Plant conducted by the Chemical Plants Division of Dravo Corporation (CPD), the Los Alamos Scientific Laboratory (LASL), and the Lawrence Livermore Laboratory (LLL). Results of the different analytical procedures are summarized. The LASL studies showed that structural distress would initially occur in two places, the building piles and the walls of the Mechanical Crane Room. This structural distress would occur at 0.14 g. The LLL investigation showed that the Liquid Waste Cell and the General Purpose Cell would start to show structural distress at 0.09g, and that lateral pile distress would begin at 0.11g

  13. Nuclear fuel financing

    International Nuclear Information System (INIS)

    Lurf, G.

    1975-01-01

    Fuel financing is only at its beginning. A logical way of developing financing model is a step by step method starting with the financing of pre-payments. The second step will be financing of natural uranium and enrichment services to the point where the finished fuel elements are delivered to the reactor operator. The third step should be the financing of fuel elements during the time the elements are inserted in the reactor. (orig.) [de

  14. International light water nuclear fuel fabrication supply. Are fabrication services assured?

    International Nuclear Information System (INIS)

    Rothwell, Geoffrey

    2010-01-01

    This paper examines the cost structure of fabricating light water reactor (LWR) fuel with low-enriched uranium (LEU, with less than 5% enrichment). The LWR-LEU fuel industry is decades old, and (except for the high entry cost of designing and licensing a fuel fabrication facility and its fuel), labor and additional fabrication lines can be added at Nth-of-a-Kind cost to the maximum capacity allowed by a site license. The industry appears to be competitive: nuclear fuel fabrication capacity is assured with many competitors and reasonable prices. However, nuclear fuel assurance has become an important issue for nations now to considering new nuclear power plants. To provide this assurance many proposals equate 'nuclear fuel banks' (which would require fuel for specific reactors) with 'LEU banks' (where LEU could be blended into nuclear fuel with the proper enrichment) with local fuel fabrication. The policy issues (which are presented, but not answered in this paper) become (1) whether the construction of new nuclear fuel fabrication facilities in new nuclear power nations could lead to the proliferation of nuclear weapons, and (2) whether nuclear fuel quality can be guaranteed under current industry arrangements, given that fuel failure at one reactor can lead to forced shutdowns at many others. (author)

  15. Implementing the Customer Contact Center: An Opportunity to Create a Valid Measurement System for Assessing and Improving a Library's Telephone Services

    Science.gov (United States)

    Murphy, Sarah Anne; Cerqua, Judith

    2012-01-01

    A customer contact center offers academic libraries the ability to consistently improve their telephone, e-mail, and IM services. This paper discusses the establishment of a contact center and the benefits of implementing the contact center model at this institution. It then introduces a practical methodology for developing a valid measurement…

  16. Clean Energy Solutions Center Services (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2014-04-01

    The Clean Energy Solutions Center (Solutions Center) helps governments, advisors and analysts create policies and programs that advance the deployment of clean energy technologies. The Solutions Center partners with international organizations to provide online training, expert assistance, and technical resources on clean energy policy.

  17. Factors influencing the behavior of pregnant women towards using prenatal care services in Iranian healthcare centers

    Directory of Open Access Journals (Sweden)

    Parisa Parsa

    2018-01-01

    Full Text Available Background & aim: Care provision is one of the most important factors in preventing and reducing mortality among pregnant mothers. Despite availability, the uptake of health services in health centers is undesirable. This study aimed to investigate the factors influencing the behavior of pregnant women towards using prenatal care services based on health belief model in healthcare centers of Tuyserkan, Hamadan Province, Iran. Methods: In this descriptive, analytical, cross-sectional study, 165 mothers visiting the health care centers of Tuyserkan, Hamadan Province, Iran, 1-15 days postpartum were chosen using the convenient sampling method during 2015. A self-structured questionnaire comprising items on demographics, knowledge, and health belief model constructs was employed for data collection. The data were analyzed using Pearson correlation coefficient, independent t-test, and logistic regression. Results: The study revealed that 72.1% of the pregnant women had regular visits, while 27.9% had irregular visits. Logistic regression reflected that knowledge (OR=0.929 and self-efficacy (OR= 0.976 were effective variables on regular prenatal visits. Conclusion: Considering pregnant women's physiological and anatomical conditions, prenatal care and regular visits are essential; thus, effective interventions in this area should be planned and implemented.

  18. Unplanned 30-Day Readmissions in a General Internal Medicine Hospitalist Service at a Comprehensive Cancer Center.

    Science.gov (United States)

    Manzano, Joanna-Grace M; Gadiraju, Sahitya; Hiremath, Adarsh; Lin, Heather Yan; Farroni, Jeff; Halm, Josiah

    2015-09-01

    Hospital readmissions are considered by the Centers for Medicare and Medicaid as a metric for quality of health care delivery. Robust data on the readmission profile of patients with cancer are currently insufficient to determine whether this measure is applicable to cancer hospitals as well. To address this knowledge gap, we estimated the unplanned readmission rate and identified factors influencing unplanned readmissions in a hospitalist service at a comprehensive cancer center. We retrospectively analyzed unplanned 30-day readmission of patients discharged from the General Internal Medicine Hospitalist Service at a comprehensive cancer center between April 1, 2012, and September 30, 2012. Multiple independent variables were studied using univariable and multivariable logistic regression models, with generalized estimating equations to identify risk factors associated with readmissions. We observed a readmission rate of 22.6% in our cohort. The median time to unplanned readmission was 10 days. Unplanned readmission was more likely in patients with metastatic cancer and those with three or more comorbidities. Patients discharged to hospice were less likely to be readmitted (all P values quality measures in cancer hospitals. Copyright © 2015 by American Society of Clinical Oncology.

  19. Postirradiation examination results from the LP-FP-2 center fuel module

    International Nuclear Information System (INIS)

    Jensen, S.M.; Akers, D.W.

    1990-01-01

    The LP-FP-2 experiment was conducted on July 9, 1985 in the Loss of Fluid Test (LOFT) facility located at the Idaho National Engineering Laboratory (INEL). The primary purpose of this experiment was to provide information of the release, transport, and deposition of fission products and aerosols during a sever core damage event performed in a large scale nuclear reactor facility. Postirradiation nondestructive and destructive examinations of the fuel bundle provided information to assist in achieving this objective, as well as providing information on the material behavior and interactions that occurred within the fuel bundle during this sever core damage experiment. This was a large-scale integral test, incorporating an 11 x 11 array of fuel rods, control rods, and instrumentation tubes, with an active core length of 1.68 m. Peak temperatures in the fuel bundle exceeded 2100 K or approximately 4.5 min, with localized peak temperatures exceeding the melting point of the UO 2 fuel (3120 K). Large amounts of zircaloy oxidation and material relocation occurred during the experiment. The transient phase was terminated by a rapid reflood of cooling water, which resulted in significant oxidation and hydrogen generation. Zircaloy oxidation during the reflood period caused a rapid temperature excursion to occur in the upper two-thirds of the fuel bundle. This article summarizes the data and analysis from the postirradiation examinations of the LP-FP-2 fuel bundle. 12 refs., 39 figs., 8 tabs

  20. [Patients and quality of primary health care services. Survey of practitioners at the Bahía de Cádiz and La Janda health centers].

    Science.gov (United States)

    Hernán García, M; Gutiérrez Cuadra, J L; Lineros González, C; Ruiz Barbosa, C; Rabadán Asensio, A

    2002-10-31

    To report the opinions of practitioners at health centers on dimensions of quality that affect user satisfaction. Cross-sectional study of focus groups (FG). Bahía de Cádiz and La Janda health centers in southwestern Spain. We studied 4 FG whose participants were staff members of the two health centers: FG1, physicians; FG2, user satisfaction service staff; FG3, social workers; FG4, nurses. The groups were based on the different functions of staff at the two centers. The analysis was based on variables in the SERCAL model (an adaptation of the SERVQUAL model for the Spanish health care system) of opinions regarding service quality: access, comfort (tangibles), personalized service (courtesy), competence, and loyalty. The data were analyzed with version N-Vivo of the NUDIST program. All dimensions of the theoretical model were identified by practitioners as constructs of users' perceptions of service quality. Users' and practitioners' views contrasted with and complemented each other to generate a model that could be validated. Access, personalized service and problem-solving (responsiveness) were key variables. Practitioners' opinions provided information of use in improving the quality model. Differences in opinion between users and practitioners merit further study based on an understanding of these groups' values and interests, and on the care provision context. Practitioners identified access, personalized service and problem-solving as features that influenced users' opinions of the quality of the health center.

  1. Hydrogen Fuel Cell Performance as Telecommunications Backup Power in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Kurtz, Jennifer [National Renewable Energy Lab. (NREL), Golden, CO (United States); Saur, Genevieve [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sprik, Sam [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-03-01

    Working in collaboration with the U.S. Department of Energy (DOE) and industry project partners, the National Renewable Energy Laboratory (NREL) acts as the central data repository for the data collected from real-world operation of fuel cell backup power systems. With American Recovery and Reinvestment Act of 2009 (ARRA) co-funding awarded through DOE's Fuel Cell Technologies Office, more than 1,300 fuel cell units were deployed over a three-plus-year period in stationary, material handling equipment, auxiliary power, and backup power applications. This surpassed a Fuel Cell Technologies Office ARRA objective to spur commercialization of an early market technology by installing 1,000 fuel cell units across several different applications, including backup power. By December 2013, 852 backup power units out of 1,330 fuel cell units deployed were providing backup service, mainly for telecommunications towers. For 136 of the fuel cell backup units, project participants provided detailed operational data to the National Fuel Cell Technology Evaluation Center for analysis by NREL's technology validation team. NREL analyzed operational data collected from these government co-funded demonstration projects to characterize key fuel cell backup power performance metrics, including reliability and operation trends, and to highlight the business case for using fuel cells in these early market applications. NREL's analyses include these critical metrics, along with deployment, U.S. grid outage statistics, and infrastructure operation.

  2. Fuel can for a nuclear reactor

    International Nuclear Information System (INIS)

    Shimizu, Shigeo.

    1984-01-01

    Purpose: To decrease the possibility of damages in a fuel can by avoiding the close contact of the outer circumferential surface of a pellet to the entire inner circumference of the fuel can in the case if the pellet undergoes heat expansion. Constitution: The inner circumference of a fuel can includes at least three linear portions each with an equi-angular distance. The center for the circle (radius R2) inscribing each of the linear portions aligns with the axial center of the fuel can. A gap is formed to each inscribing circle with a band-like circular inner wall. The radius R2 for the inscribing circle is made larger than the radius R1 for the pellet and the length of the linear portion and the radius R2 for the inscribing circle are determined to desired values in view of the fuel design. If the fuel pellet expands thermally during reactor operation, since a gap is remained between the outer circumferential surface of the pellet and the inner circumferential surface of the fuel can and the outer circumferential surface of the pellet is not in close contact entirely with the inner circumferential surface of the fuel can, the possibility of damaging the fuel can is decreased. (Seki, T.)

  3. Characteristics of Children with Autism Spectrum Disorders Who Received Services through Community Mental Health Centers

    Science.gov (United States)

    Bryson, Stephanie A.; Corrigan, Susan K.; McDonald, Thomas P.; Holmes, Cheryl

    2008-01-01

    Despite the presence of significant psychiatric comorbidity among children with autism spectrum disorders (ASDs), little research exists on those who receive community-based mental health services. This project examined one year (2004) of data from the database maintained by 26 community mental health centers (CMHCs) in the Midwestern US state of…

  4. Nuclear fuel cycles : description, demand and supply estimates

    International Nuclear Information System (INIS)

    Gadallah, A.A.; Abou Zahra, A.A.; Hammad, F.H.

    1985-01-01

    This report deals with various nuclear fuel cycles description as well as the world demand and supply estimates of materials and services. Estimates of world nuclear fuel cycle requirements: nuclear fuel, heavy water and other fuel cycle services as well as the availability and production capabilities of these requirements, are discussed for several reactor fuel cycle strategies, different operating and under construction fuel cycle facilities in some industrialized and developed countries are surveyed. Various uncertainties and bottlenecks which are recently facing the development of some fuel cycle components are also discussed, as well as various proposals concerning fuel cycle back-end concepts. finally, the nuclear fuel cycles activities in some developing countries are reviewed with emphasis on the egyptian plans to introduce nuclear power in the country. 11 fig., 16 tab

  5. Hydrogen-Oxygen PEM Regenerative Fuel Cell Development at the NASA Glenn Research Center

    Science.gov (United States)

    Bents, David J.; Scullin, Vincent J.; Chang, Bei-Jiann; Johnson, Donald W.; Garcia, Christoher P.; Jakupca, Ian J.

    2005-01-01

    The closed-cycle hydrogen-oxygen PEM regenerative fuel cell (RFC) at the NASA Glenn Research Center has successfully demonstrated closed cycle operation at rated power for multiple charge-discharge cycles. During charge cycle the RFC has absorbed input electrical power simulating a solar day cycle ranging from zero to 15 kWe peak, and delivered steady 5 kWe output power for periods exceeding 8 hr. Orderly transitions from charge to discharge mode, and return to charging after full discharge, have been accomplished without incident. Continuing test operations focus on: (1) Increasing the number of contiguous uninterrupted charge discharge cycles; (2) Increasing the performance envelope boundaries; (3) Operating the RFC as an energy storage device on a regular basis; (4) Gaining operational experience leading to development of fully automated operation; and (5) Developing instrumentation and in situ fluid sampling strategies to monitor health and anticipate breakdowns.

  6. Find a Health Center

    Data.gov (United States)

    U.S. Department of Health & Human Services — HRSA Health Centers care for you, even if you have no health insurance – you pay what you can afford based on your income. Health centers provide services that...

  7. Engineer Research and Development Center's Materials Testing Center (MTC)

    Data.gov (United States)

    Federal Laboratory Consortium — The Engineer Research and Development Center's Materials Testing Center (MTC) is committed to quality testing and inspection services that are delivered on time and...

  8. Holddown device for nuclear fuel assembly

    International Nuclear Information System (INIS)

    Anthony, A.J.

    1978-01-01

    An apparatus for preventing ''floating'' of nuclear-reactor fuel assemblies due to hydraulic forces is disclosed. The apparatus uses a holddown column made of the same material as the core barrel. The column is positioned in a center guide-tube location in the fuel assembly in such a manner as to enable it either to slide within the center guide tube or, if the center guide tube is replaced by the column, to slide through openings in the spacer grids. The lower end of the holddown column engages the lower end fitting of the fuel assembly, and the upper end of the column engages a flow plate to which holddown force is applied. As a consequence of this arrangement, holddown force is transmitted from the flow plate through the holddown column to the lower end fitting. Movement of the fuel assembly is thereby prevented without a compression load being applied to the fuel-assemb1ly structure. In addition, variations due to thermal expansion in the distance between the lower core plate and the upper core plate are largely made up for by corresponding variations in the holddown column because the holddown column and the core barrel can be made of the same material

  9. Fuels. Deliveries and consumption of fuels during 4th quarter 2001 and during 2001

    International Nuclear Information System (INIS)

    2002-01-01

    The total volume of oil product deliveries (excluded lubricants, bitumen etc.) from the oil companies was 3 per cent higher during 2001 compared with 2000. The deliveries of motor gasoline and diesel oil increased by 1 per cent. Domestic heating oil decreased by 2 per cent and heavy fuel oils increased by 17 per cent, all compared with 2000. Under the forth quarter 2001 the deliveries of oil products (excluded lubricants bitumen etc.) was 5 per cent higher compared with the same quarter 2000. The deliveries of domestic heating oil and heavy fuel oils increased by 4 per cent and 28 per cent respectively. Motor gasoline increased by 3 per cent while the deliveries of diesel oil decreased by 1 per cent. The consumption of fuels in mining and manufacturing decreased by 5 per cent during 2001 compared with 2000. Most of the reduction came from the lower use of domestic fuel in manufacture of pulp, paper and paper products, printing and publishing. The total consumption in mining and manufacturing was unchanged during the 4 th quarter 2001 compared with the same period 2000. The consumption of domestic fuels decreased by 6 per cent and the oil consumption increased by 11 per cent. Higher consumption of fuels in electricity, gas and district heating services. The consumption of fuels in electricity, gas and district heating services increased by 14 per cent 2001 compared with 2000. The consumption of domestic fuels raised with 12 per cent and the use of fossil fuels raised with 17 per cent. The highest increasing, 27 per cent, was found within the use of oil. Electricity, gas and district heating services increased there fuel consumption with 29 per cent during the 0 quarter 2001 compared with the same period 2000. The raise can be explained with the fact that the 4th quarter 2000 was unusually warm. The increasing is found both in the use of domestic and fossil fuels

  10. Expectations and Perceptions of the Educational Service at the Universidad Nacional Abierta (Local Center Merida, Venezuela

    Directory of Open Access Journals (Sweden)

    Teresa de Jesús Molina Gutiérrez

    2017-08-01

    Full Text Available The objective of this study was to interpret the relationship between the expectations and the perceptions that the staff has about the quality of the educational service offered at the Mérida Local Center (Universidad Nacional Abierta, then the conceptual model of quality of service SERVQUAL, complemented with the qualitative approach. The informants were 15 advisors, 20 students and 5 administrative staff, the data were collected through the semi-structured interview and interpreted with the content analysis. The results indicate that there is no satisfaction with the educational service or that satisfaction is very low, because the expectations that are generated before receiving it are not surpassed by the perceived value, which is an indicator of the absence of quality of service. On the other hand, achieving quality in the service provided is the responsibility of all involved since the complexity of the roles fulfilled in the educational dialectic means that the staff act simultaneously as clients and as service providers.

  11. Fuel assembly identification by magnetic scanning

    International Nuclear Information System (INIS)

    Badurek, G.

    1986-09-01

    In order to identify individual fuel assemblies by a magnetic fingerprint, investigations were made on iron inclusions in fuel elements and a method was developed to measure these by magnetically scanning the element. The fuel assembly is drawn with constant speed through a homogeneous magnetic field to magnetize iron inclusions. Resulting inhomogeneous magnetic dipole fields induce a voltage difference in pick up coils which is proportional to the mass of the inclusion. Using lock-in technique 3 mg pieces of steel wire on the surface of the fuel element were detected while the lower limit for the center of an assembly for ferromagnetic spheres was 50 mg. In single rods ferromagnetic samples of 1 mg were detected regardless of geometric form or location. With minor modifications of the measuring procedure the sensitivity limit can be improved to about 10 mg at the center of an assembly. In the KWU-fuel at Zwentendorf no iron inclusions were found

  12. Relation of fuel rod service parameters and design requirements to produced fuel rod and their components

    International Nuclear Information System (INIS)

    Bibilashvili, Yu.K.

    1999-01-01

    Based on the presented material it is possible to state that there is a very close link between the fuel operational parameters and the requirements for its design and production process. The required performance and life-time of a fuel rod can be only assured by the correctly selected design and process solutions. The economical aspect of this problem is significantly depend on the commercial feasibility of a particular selected solution with the provision of an automated and comparative by inexpensive production of a fuel rod and its components. The operational conditions are also important for the life time of the fuel rods. If there are no special measures for the mitigation of the certain operation conditions the leakage of fuel elements can take place before the planned time. (authors)

  13. Mechanical analysis of UMo/Al dispersion fuel

    International Nuclear Information System (INIS)

    Jeong, Gwan Yoon; Kim, Yeon Soo; Sohn, Dong-Seong

    2015-01-01

    Deformation of fuel particles and mass transfer from the transverse end of fuel meat toward the meat center was observed. This caused plate thickness peaking at a location between the meat edge and the meat center. The underlying mechanism for this fuel volume transport is believed to be fission induced creep of the U–Mo/Al meat. Fuel meat swelling was measured using optical microscopy images of the cross sections of the irradiated test plates. The time-dependent meat swelling was modeled for use in numerical simulation. A distinctive discrepancy between the predicted and measured meat thickness was found at the meat ends, which was assumed to be due to creep-induced mass relocation from the meat end to the meat center region that was not considered in the meat swelling model. ABAQUS FEA simulation was performed to reproduce the observed phenomenon at the meat ends. Through the simulation, we obtained the effective creep rate constants for the interaction layers (IL) and aluminum matrix. In addition, we obtained the corresponding stress and strain analysis results that can be used to understand mechanical behavior of U–Mo/Al dispersion fuel.

  14. Mechanical analysis of UMo/Al dispersion fuel

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Gwan Yoon [Ulsan National Institute of Science and Technology, Department of Nuclear Engineering, 50 UNIST-gil, Eonyang-eup, Ulju-gun, Ulsan, 689-798 (Korea, Republic of); Kim, Yeon Soo [Argonne National Laboratory, 9700 South Cass Avenue, Argonne, IL 60439 (United States); Sohn, Dong-Seong, E-mail: dssohn@unist.ac.kr [Ulsan National Institute of Science and Technology, Department of Nuclear Engineering, 50 UNIST-gil, Eonyang-eup, Ulju-gun, Ulsan, 689-798 (Korea, Republic of)

    2015-11-15

    Deformation of fuel particles and mass transfer from the transverse end of fuel meat toward the meat center was observed. This caused plate thickness peaking at a location between the meat edge and the meat center. The underlying mechanism for this fuel volume transport is believed to be fission induced creep of the U–Mo/Al meat. Fuel meat swelling was measured using optical microscopy images of the cross sections of the irradiated test plates. The time-dependent meat swelling was modeled for use in numerical simulation. A distinctive discrepancy between the predicted and measured meat thickness was found at the meat ends, which was assumed to be due to creep-induced mass relocation from the meat end to the meat center region that was not considered in the meat swelling model. ABAQUS FEA simulation was performed to reproduce the observed phenomenon at the meat ends. Through the simulation, we obtained the effective creep rate constants for the interaction layers (IL) and aluminum matrix. In addition, we obtained the corresponding stress and strain analysis results that can be used to understand mechanical behavior of U–Mo/Al dispersion fuel.

  15. Saclay Center of Nuclear Studies, Direction of Materials and Nuclear Fuels, Department of Physico-Chemistry, Division of Physical Chemistry. 1968 Annual report

    International Nuclear Information System (INIS)

    Schmidt, M.; Clerc, M.; Le Calve, J.; Bourene, M.; Lesigne, B.; Gillois, M.; Devillers, C.; Arvis, M.; Gilles, L.; Moreau, M.; Sutton, J.; Faraggi, M.; Desalos, J.; Tran Dinh Son; Barat, F.; Hickel, B.; Chachaty, C.; Forchioni, A.; Shiotani, M.; Larher, Y.; Maurice, P.; Le Bail, H.; Nenner, T.

    1969-03-01

    This document is the 1968 annual report of research activities at the Physico-Chemistry Department (Physical Chemistry Division), part of the Directorate of Materials and Nuclear Fuels of the CEA Saclay center of nuclear studies. The report is divided into two main parts: radiolysis and photolysis studies (gaseous phase, condensed phase), and general physico-chemical studies (sorption, molecular jets)

  16. Exploring spatial change and gravity center movement for ecosystem services value using a spatially explicit ecosystem services value index and gravity model.

    Science.gov (United States)

    He, Yingbin; Chen, Youqi; Tang, Huajun; Yao, Yanmin; Yang, Peng; Chen, Zhongxin

    2011-04-01

    Spatially explicit ecosystem services valuation and change is a newly developing area of research in the field of ecology. Using the Beijing region as a study area, the authors have developed a spatially explicit ecosystem services value index and implemented this to quantify and spatially differentiate ecosystem services value at 1-km grid resolution. A gravity model was developed to trace spatial change in the total ecosystem services value of the Beijing study area from a holistic point of view. Study results show that the total value of ecosystem services for the study area decreased by 19.75% during the period 1996-2006 (3,226.2739 US$×10(6) in 1996, 2,589.0321 US$×10(6) in 2006). However, 27.63% of the total area of the Beijing study area increased in ecosystem services value. Spatial differences in ecosystem services values for both 1996 and 2006 are very clear. The center of gravity of total ecosystem services value for the study area moved 32.28 km northwestward over the 10 years due to intensive human intervention taking place in southeast Beijing. The authors suggest that policy-makers should pay greater attention to ecological protection under conditions of rapid socio-economic development and increase the area of green belt in the southeastern part of Beijing.

  17. Fuel cycle developments

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    This article is a review of the end-of-1994 status of world uranium production and fuels processing. The major producing areas/countries of the world are discussed and the production figures for each area/country are provided. The conversion services market is also discussed, as is the enrichment services market. Each of the major enrichment services provider organizations is noted

  18. Effect of Gas Fueling Location on H-mode Access in NSTX

    International Nuclear Information System (INIS)

    Maingi, R.; Bell, M.; Bell, R.; Biewer, T.; Bush, C.; Chang, C.S.; Gates, D.; Kaye, S.; Kugel, H.; LeBlanc, B.; Maqueda, R.; Menard, J.; Mueller, D.; Raman, R.; Sabbagh, S.; Soukhanovskii, V.

    2003-01-01

    The dependence of H-mode access on the poloidal location of the gas injection source has been investigated in the National Spherical Torus Experiment (NSTX). We find that gas fueling from the center stack midplane area produces the most reproducible H-mode access with generally the lowest L-H threshold power in lower single-null configuration. The edge toroidal rotation velocity is largest (in direction of the plasma current) just before the L-H transition with center stack midplane fueling, and then reverses direction after the L-H transition. Simulation of these results with a 2-D guiding-center Monte Carlo neoclassical transport code is qualitatively consistent with the trends in the measured velocities. Double-null discharges exhibit H-mode access with gas fueling from either the center stack midplane or center stack top locations, indicating a reduced sensitivity of H-mode access on fueling location in that shape

  19. High-level waste solidification system for the Western New York Nuclear Service Center

    International Nuclear Information System (INIS)

    Carrell, J.R.; Holton, L.K.; Siemens, D.H.

    1982-01-01

    A preconceptual design for a waste conditioning and solidification system for the immobilization of the high-level liquid wastes (HLLW) stored at the Western New York Nuclear Service Center (WNYNSC), West Valley, New York was completed in 1981. The preconceptual design was conducted as part of the Department of Energy's (DOE) West Valley Demonstration Project, which requires a waste management demonstration at the WNYNSC. This paper summarizes the bases, assumptions, results and conclusions of the preconceptual design study

  20. Comparison of the socioeconomic impacts of international fuel service centers versus dispersed nuclear facilities

    International Nuclear Information System (INIS)

    Braid, R.B. Jr.

    1979-01-01

    The paper investigates a variety of community impacts including: public services, fiscal issues, economic matters, land and water use, political and social cohesion, and legal considerations. Comparisons of socioeconomic impacts of colocated versus dispersed sites are made on the basis of the size of the impacted communities, the size and type of nuclear facility, and the facility's construction time frame. The paper concludes that, under similar circumstances, most of the socioeconomic impacts of colocated nuclear facilities would be somewhat less than the sum of the impacts associated with equivalent dispersed sites. While empirical data is non-existent, the paper contends, however, that because the socioeconomic impacts of colocated facilities are so great and readily identifiable to a public unskilled in making comparisons with the dispersed alternative, the facilities will likely generate so much public opposition that IFSCs will probably prove infeasible

  1. The Nuclear Fuel Cycle

    International Nuclear Information System (INIS)

    2011-08-01

    This brochure describes the nuclear fuel cycle, which is an industrial process involving various activities to produce electricity from uranium in nuclear power reactors. The cycle starts with the mining of uranium and ends with the disposal of nuclear waste. The raw material for today's nuclear fuel is uranium. It must be processed through a series of steps to produce an efficient fuel for generating electricity. Used fuel also needs to be taken care of for reuse and disposal. The nuclear fuel cycle includes the 'front end', i.e. preparation of the fuel, the 'service period' in which fuel is used during reactor operation to generate electricity, and the 'back end', i.e. the safe management of spent nuclear fuel including reprocessing and reuse and disposal. If spent fuel is not reprocessed, the fuel cycle is referred to as an 'open' or 'once-through' fuel cycle; if spent fuel is reprocessed, and partly reused, it is referred to as a 'closed' nuclear fuel cycle.

  2. The Back End of the Fuel Cycle Moves Front and Center

    International Nuclear Information System (INIS)

    Isaacs, T; Choi, J

    2006-01-01

    For many years, the commercial nuclear business has remained relatively stable in many ways. The introduction of new plants, the spread to new countries, and the development of key elements of the fuel cycle such as enrichment, reprocessing and waste disposal have been quite modest. That is unlikely to be the case in the coming years. A number of events and trends are becoming increasingly apparent and are cause for both opportunity and caution: (1) New nuclear power plant orders are likely to grow and spread, particularly in the developing world, e.g. China and India. (2) The growing recognition that the developing world will be a major competitor for limited energy resources is raising awareness in the developed world regarding concerns for future energy security. (3) Clearer evidence of the effects of greenhouse gas emissions on global warming, largely from the burning of fossil fuels, is creating more attention on the environmental benefits of nuclear power. (4) The last decade has shown unequivocal evidence of countries lying, cheating on their NPT obligation, and covertly carrying out nuclear weapons-related activities. Some have suggested their presumed need for a domestic nuclear fuel cycle as a rationale to pursue enrichment and/or reprocessing capabilities, which would move them to the doorstep of being nuclear weapons capable. The DPRK even took the action to abrogate the NPT to hold on to its nuclear weapons program. (5) 9/11 and other evidence have made it undeniable that terrorist groups would like to obtain weapons of mass destruction, particularly nuclear weapons, and would use them if they could. A number of initiatives have been proposed recently to allow for the growth and spread of nuclear power while limiting the justifications for additional countries to pursue the acquisition of enrichment or reprocessing capabilities. Most of these initiatives have fresh fuel assurance as a central component. The rationale is simple; if a country can have

  3. Expected returns from a tax on nuclear fuel elements in the context of longer service lives of German nuclear power plants

    International Nuclear Information System (INIS)

    Kondziella, Hendrik; Bruckner, Thomas

    2010-01-01

    To what extent will the fuel element tax introduced by the German government in combination with the longer service life of nuclear power stations reduce the profits of public utilities? A qualitative assessment suggests that the tax will not equal the full profits. Using an electricity market model, various scenarios can be calculated for an eight-year prolongation of the residual service life of existing nuclear power plants. (orig.)

  4. Web Services and Data Enhancements at the Northern California Earthquake Data Center

    Science.gov (United States)

    Neuhauser, D. S.; Zuzlewski, S.; Lombard, P. N.; Allen, R. M.

    2013-12-01

    The Northern California Earthquake Data Center (NCEDC) provides data archive and distribution services for seismological and geophysical data sets that encompass northern California. The NCEDC is enhancing its ability to deliver rapid information through Web Services. NCEDC Web Services use well-established web server and client protocols and REST software architecture to allow users to easily make queries using web browsers or simple program interfaces and to receive the requested data in real-time rather than through batch or email-based requests. Data are returned to the user in the appropriate format such as XML, RESP, simple text, or MiniSEED depending on the service and selected output format. The NCEDC offers the following web services that are compliant with the International Federation of Digital Seismograph Networks (FDSN) web services specifications: (1) fdsn-dataselect: time series data delivered in MiniSEED format, (2) fdsn-station: station and channel metadata and time series availability delivered in StationXML format, (3) fdsn-event: earthquake event information delivered in QuakeML format. In addition, the NCEDC offers the the following IRIS-compatible web services: (1) sacpz: provide channel gains, poles, and zeros in SAC format, (2) resp: provide channel response information in RESP format, (3) dataless: provide station and channel metadata in Dataless SEED format. The NCEDC is also developing a web service to deliver timeseries from pre-assembled event waveform gathers. The NCEDC has waveform gathers for ~750,000 northern and central California events from 1984 to the present, many of which were created by the USGS NCSN prior to the establishment of the joint NCSS (Northern California Seismic System). We are currently adding waveforms to these older event gathers with time series from the UCB networks and other networks with waveforms archived at the NCEDC, and ensuring that the waveform for each channel in the event gathers have the highest

  5. Drilling Experiments of Dummy Fuel Rods Using a Mock-up Drilling Device and Detail Design of Device for Drilling of Irradiated Nuclear Fuel Rods

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae Yong; Lee, H. K.; Chun, Y. B.; Park, S. J.; Kim, B. G

    2007-07-15

    KAERI are developing the safety evaluation method and the analysis technology for high burn-up nuclear fuel rod that is the project, re-irradiation for re-instrumented fuel rod. That project includes insertion of a thermocouple in the center hole of PWR nuclear fuel rod with standard burn-up, 3,500{approx}4,000MWD/tU and then inspection of the nuclear fuel rod's heat performance during re-irradiation. To re-fabricate fuel rod, two devices are needed such as a drilling machine and a welding machine. The drilling machine performs grinding a center hole, 2.5 mm in diameter and 50 mm in depth, for inserting a thermocouple. And the welding machine is used to fasten a end plug on a fuel rod. Because these two equipment handle irradiated fuel rods, they are operated in hot cell blocked radioactive rays. Before inserting any device into hot cell, many tests with that machine have to be conducted. This report shows preliminary experiments for drilling a center hole on dummy of fuel rods and optimized drilling parameters to lessen operation time and damage of diamond dills. And the design method of a drilling machine for irradiated nuclear fuel rods and detail design drawings are attached.

  6. CO2 Data Distribution and Support from the Goddard Earth Science Data and Information Services Center (GES-DISC)

    Science.gov (United States)

    Hearty, Thomas; Savtchenko, Andrey; Vollmer, Bruce; Albayrak, Arif; Theobald, Mike; Esfandiari, Ed; Wei, Jennifer

    2015-01-01

    This talk will describe the support and distribution of CO2 data products from OCO-2, AIRS, and ACOS, that are archived and distributed from the Goddard Earth Sciences Data and Information Services Center. We will provide a brief summary of the current online archive and distribution metrics for the OCO-2 Level 1 products and plans for the Level 2 products. We will also describe collaborative data sets and services (e.g., matchups with other sensors) and solicit feedback for potential future services.

  7. Progress in hydrogen fueled busses

    International Nuclear Information System (INIS)

    Scott, P.B.; Mazaika, D.M.; Tyler, T.

    2004-01-01

    'Full text:' The Thor/ISE fuel cell bus has been in demonstration and revenue service during 2002-2003 at sites including SunLine Transit, Chula Vista Transit, Los Angeles County Metropolitan Transit Authority, and AC Transit in Oakland. By taking advantage of ISE's advanced hybrid-electric drive technology, this 30-foot bus operates with a much smaller fuel cell than those used in other buses of this class. Further, stress on the fuel cell is diminished. Based on the exceptional performance of this prototype bus, the transit agencies listed above have concluded that hybrid electric hydrogen fueled buses are attractive. Two types of hydrogen fueled hybrid electric buses will be described: - fuel cell powered, and - HICE (Hydrogen Internal Combustion Engine) This progress report will include: 1. Experience with the Thor/ISE fuel cell bus, including results from revenue service at two transit locations, 2. Design and fabrication status of the advanced fuel cell buses being built for AC Transit and SunLine Transit, 3. Design and fabrication status of the prototype HHICE (Hybrid electric Hydrogen fueled Internal Combustion Engine) bus that uses a Ford hydrogen burning engine, mated to a generator, rather than a fuel cell. Other than the engine, the drive train in the HHICE bus is nearly identical to that of a fuel cell hybrid-electric bus. Canadian participation in the HHICE bus is extensive, it is a New Flyer platform and will be winter tested in Winnipeg. (author)

  8. Social science to improve fuels management: a synthesis of research on aesthetics and fuels management

    Science.gov (United States)

    Robert L. Ryan

    2005-01-01

    A series of syntheses were commissioned by the USDA Forest Service to aid in fuels mitigation project planning. This synthesis focuses on research addressing aesthetic considerations of fuels management. A general finding is that fuels management activities can contribute to the visual quality of a landscape. Topics covered in the synthesis include research findings on...

  9. Legal, institutional, and political issues in transportation of nuclear materials at the back end of the LWR nuclear fuel cycle

    International Nuclear Information System (INIS)

    Lippek, H.E.; Schuller, C.R.

    1979-03-01

    A study was conducted to identify major legal and institutional problems and issues in the transportation of spent fuel and associated processing wastes at the back end of the LWR nuclear fuel cycle. (Most of the discussion centers on the transportation of spent fuel, since this activity will involve virtually all of the legal and institutional problems likely to be encountered in moving waste materials, as well.) Actions or approaches that might be pursued to resolve the problems identified in the analysis are suggested. Two scenarios for the industrial-scale transportation of spent fuel and radioactive wastes, taken together, high-light most of the major problems and issues of a legal and institutional nature that are likely to arise: (1) utilizing the Allied General Nuclear Services (AGNS) facility at Barnwell, SC, as a temporary storage facility for spent fuel; and (2) utilizing AGNS for full-scale commercial reprocessing of spent LWR fuel

  10. Legal, institutional, and political issues in transportation of nuclear materials at the back end of the LWR nuclear fuel cycle

    Energy Technology Data Exchange (ETDEWEB)

    Lippek, H.E.; Schuller, C.R.

    1979-03-01

    A study was conducted to identify major legal and institutional problems and issues in the transportation of spent fuel and associated processing wastes at the back end of the LWR nuclear fuel cycle. (Most of the discussion centers on the transportation of spent fuel, since this activity will involve virtually all of the legal and institutional problems likely to be encountered in moving waste materials, as well.) Actions or approaches that might be pursued to resolve the problems identified in the analysis are suggested. Two scenarios for the industrial-scale transportation of spent fuel and radioactive wastes, taken together, high-light most of the major problems and issues of a legal and institutional nature that are likely to arise: (1) utilizing the Allied General Nuclear Services (AGNS) facility at Barnwell, SC, as a temporary storage facility for spent fuel; and (2) utilizing AGNS for full-scale commercial reprocessing of spent LWR fuel.

  11. In-service inspection of ET-RR-1 reactor vessels and spent fuel storage tank

    International Nuclear Information System (INIS)

    Khattab, M.; Shafy, M.; Konoplev, K.; Samodurve, YU.; Orlov, S.; Didenko, V.; Jackorev, O.

    1993-01-01

    Technical survey included in-service inspection are needed in order to investigate the structural integrity and to insure safe operation of the ET-R R-1 reactor after thirty years aging. An intensive work for the inspection of the inspection of the central tank, shield tank, horizontal channels, primary coolant circuit and spent fuel storage tank have been carried out. The inspection procedures were visual method using video camera and magnification optical as well as thickness measurements using ultrasonic gauge meter and replica for determining defect depth. Water chemical analysis of the primary cooling circuit and spent fuel storage were helpful in results explanation. The results showed that the reactor vessels have good surface conditions. The observed pitting did not affect the structural integrity. The majority of the defects were pits having maximum surface area of about 50 mm. Their depth does not exceed 2 mm. The pits depth rate penetration is of the order of 0.5% per year. Thickness measurements showed insignificant variation. Water status and its chemical properties are very important in controlling corrosion rate. 18 figs., 14 tabs

  12. Low enrichment fuel conversion for Iowa State University

    International Nuclear Information System (INIS)

    Rohach, A.F.; Hendrickson, R.A.

    1990-08-01

    Work during the reported period was centered primarily in preparation for receiving the LEU fuel and the shipping of the HEU fuel. The LEU fuel has not been received. The HEU fuel assemblies for the UTR-10 reactor will not fit into any current research reactor shipping containers; therefore, the fuel assemblies must be disassembled and the fuel shipped as fuel plates. Procedures and practices have been developed so that the fuel assemblies will be disassembled in a shielded environment

  13. Standard guide for evaluation of materials used in extended service of interim spent nuclear fuel dry storage systems

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 Part of the total inventory of commercial spent nuclear fuel (SNF) is stored in dry cask storage systems (DCSS) under licenses granted by the U.S. Nuclear Regulatory Commission (NRC). The purpose of this guide is to provide information to assist in supporting the renewal of these licenses, safely and without removal of the SNF from its licensed confinement, for periods beyond those governed by the term of the original license. This guide provides information on materials behavior under conditions that may be important to safety evaluations for the extended service of the renewal period. This guide is written for DCSS containing light water reactor (LWR) fuel that is clad in zirconium alloy material and stored in accordance with the Code of Federal Regulations (CFR), at an independent spent-fuel storage installation (ISFSI). The components of an ISFSI, addressed in this document, include the commercial SNF, canister, cask, and all parts of the storage installation including the ISFSI pad. The language of t...

  14. Alternative Fuels Data Center: Codes and Standards Resources

    Science.gov (United States)

    resources linked below help project developers and code officials prepare and review code-compliant projects , storage, and infrastructure. The following charts show the SDOs responsible for these alternative fuel codes and standards. Biodiesel Vehicle and Infrastructure Codes and Standards Chart Electric Vehicle and

  15. Alternative Fuel News: Official Publication of the Clean Cities Network and the Alternative Fuels Data Center, Vol. 4, No. 2

    Energy Technology Data Exchange (ETDEWEB)

    Ficker, C.

    2000-09-08

    This issue of Alternative Fuel News discusses Executive Order 13149 which is designed to not only increase the use of alternative fuel by federal agencies but also to increase the use of fuel efficient vehicles in the federal fleet. Also highlighted is the 6th National Clean Cities Conference and Expo held in San Diego, May 7-10, 2000, which attracted nearly 1,000 people for three action-packed days of alternative fuel activities. The work to develop a market for alternative fuels is more important than ever.

  16. Clean Energy Solutions Center Services

    Energy Technology Data Exchange (ETDEWEB)

    2016-03-01

    The Solutions Center offers no-cost expert policy assistance, webinars and training forums, clean energy policy reports, data, and tools provided in partnership with more than 35 leading international and regional clean energy organizations.

  17. Development and Implementation of an Inpatient Otolaryngology Consultation Service at an Academic Medical Center.

    Science.gov (United States)

    Huddle, Matthew G; London, Nyall R; Stewart, C Matthew

    2018-02-01

    To design and implement a formal otolaryngology inpatient consultation service that improves satisfaction of consulting services, increases educational opportunities, improves the quality of patient care, and ensures sustainability after implementation. This was a retrospective cohort study in a large academic medical center encompassing all inpatient otolaryngology service consultations from July 2005 to June 2014. Staged interventions included adding fellow coverage (July 2007 onward), intermittent hospitalist coverage (July 2010 onward), and a physician assistant (October 2011 onward). Billing data were collected for incidences of new patient and subsequent consultation charges. The 2-year preimplementation period (July 2005-June 2007) was compared with the postimplementation periods, divided into 2-year blocks (July 2007-June 2013). Outcome measures of patient encounters and work relative value units were compared between pre- and postimplementation blocks. Total encounters increased from 321 preimplementation to 1211, 1347, and 1073 in postimplementation groups ( P < 0.001). Total work relative value units increased from 515 preimplementation to 2090, 1934, and 1273 in postimplementation groups ( P < 0.001). A formal inpatient consultation service was designed with supervisory oversight by non-Accreditation Council for Graduate Medical Education fellows and then expanded to include intermittent hospitalist management, followed by the addition of a dedicated physician assistant. These additions have led to the formation of a sustainable consultation service that supports the mission of high-quality care and service to consulting teams.

  18. Electrolysis activities at FCH Test Center

    DEFF Research Database (Denmark)

    Ravn Nielsen, Eva; Nygaard, Frederik Berg

    FCH Test Center for fuel cell and hydrogen technologies was established in 2010 at Risø DTU in Denmark. Today, the test center is part of DTU Energy Conversion. The center gives industry access to advanced testing and demonstration of components and systems. A number of national projects and EU...... projects regarding water electrolysis involve FCH Test Center as a partner. This presentation gives an overview of the activities....

  19. Issues for Conceptual Design of AFCF and CFTC LWR Spent Fuel Separations Influencing Next-Generation Aqueous Fuel Reprocessing

    International Nuclear Information System (INIS)

    D. Hebditch; R. Henry; M. Goff; K. Pasamehmetoglu; D. Ostby

    2007-01-01

    In 2007, the U.S. Department of Energy (DOE) published the Global Nuclear Energy Partnership (GNEP) strategic plan, which aims to meet US and international energy, safeguards, fuel supply and environmental needs by harnessing national laboratory R and D, deployment by industry and use of international partnerships. Initially, two industry-led commercial scale facilities, an advanced burner reactor (ABR) and a consolidated fuel treatment center (CFTC), and one developmental facility, an advanced fuel cycle facility (AFCF) are proposed. The national laboratories will lead the AFCF to provide an internationally recognized R and D center of excellence for developing transmutation fuels and targets and advancing fuel cycle reprocessing technology using aqueous and pyrochemical methods. The design drivers for AFCF and the CFTC LWR spent fuel separations are expected to impact on and partly reflect those for industry, which is engaging with DOE in studies for CFTC and ABR through the recent GNEP funding opportunity announcement (FOA). The paper summarizes the state-of-the-art of aqueous reprocessing, gives an assessment of engineering drivers for U.S. aqueous processing facilities, examines historic plant capital costs and provides conclusions with a view to influencing design of next-generation fuel reprocessing plants

  20. Nuclear fuel pellet charging device

    International Nuclear Information System (INIS)

    Komuro, Kojiro.

    1990-01-01

    The present invention concerns a nuclear fuel pellet loading device, in which nuclear fuel pellets are successively charged from an open end of a fuel can while rotating the can. That is, a fuel can sealed at one end with an end plug and opened at the other end is rotated around its pipe axis as the center on a rotationally diriving table. During rotation of the fuel can, nuclear fuel pellets are successively charged by means of a feed rod of a feeding device to the inside of the fuel can. The fuel can is rotated while being supported horizontally and the fuel pellets are charged from the open end thereof. Alternatively, the fuel can is rotated while being supported obliquely and the fuel pellets are charged gravitationally into the fuel can. In this way, the damages to the barrier of the fuel can can be reduce. Further, since the fuel pellets can be charged gravitationally by rotating the fuel can while being supported obliquely, the damages to the barrier can be reduced remarkably. (I.S.)

  1. State and local fiscal impacts associated with nuclear energy centers: some initial considerations

    International Nuclear Information System (INIS)

    Bjornstad, D.J.

    1976-04-01

    The concept of the nuclear energy center is designed to consolidate a number of electrical power reactors and/or related fuel cycle activities on a single site. Such a siting strategy would concentrate a great deal of economic activity in one area and, as a consequence, generate significant impacts on state and local governments by increasing tax bases and public service demands and by altering intergovernmental fiscal relations. This study was designed to place rough empirical measures on relevant impact variables and to highlight areas for which a need for further research was indicated.

  2. Inter-linkage between Hinterlands and Service Centers of Bima and Darbang VDCs in Myagdi District: A Rural Development Perspective

    Directory of Open Access Journals (Sweden)

    Beg Prasad Garbuja

    2015-12-01

    Full Text Available This study focuses on exploring the status and contribution of inter- linkage relationship between service center and rural hinterland. The study was conducted in Bima and Darbang Village Development Committees (VDCs of Myagdi district. This paper has used rural development perspective. The respondents were from 63 sample households including producers, consumers and service providers selected by using probability and non probability sampling methods. The primary data were collected through survey questionnaire, key informant interview, participant observation and focus group discussion whereas secondary data were generated from published and unpublished books, articles, journals, profile of VDCs and DDC. The study has revealed with various types of linkage between service center and rural hinterland i.e. service delivery, spatial or physical, administrative, economic, technological, financial and socio-cultural, educational and health service linkage. The study also highlighted productive role of remittance, international experience and adaptation of modern agriculture technology that has been positively affecting socio-economic life of the rural people. Further, joint efforts of public and private sectors’ and local stakeholders’ can be applied for developing and promoting service delivery opportunities and marketing facilities to the local people. The finding of the study has very strong implications to the local stakeholders for formulation of short run and long run local development plan in a similar situation.

  3. Compilation of FY 1995 and FY 1996 DOD Financial Statements at the Defense Finance and Accounting Service, Indianapolis Center

    National Research Council Canada - National Science Library

    1996-01-01

    The audit objective was to determine whether the Defense Finance and Accounting Service, Indianapolis Center, consistently and accurately compiled financial data from field entities and other sources...

  4. Blunt impact tests of retired passenger locomotive fuel tanks

    Science.gov (United States)

    2017-08-01

    The Transportation Technology Center, Inc. conducted impact tests on three locomotive fuel tanks as part of the Federal Railroad Administrations locomotive fuel tank crashworthiness improvement program. Three fuel tanks, two from EMD F40PH locomot...

  5. 76 FR 17139 - Health Center Program

    Science.gov (United States)

    2011-03-28

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Health Resources and Services Administration Health Center Program AGENCY: Health Resources and Services Administration, HHS. ACTION: Notice of Noncompetitive... Improvement Project (CIP) from Saint Vincent's Catholic Medical Centers (SVCMC) of New York, current grantee...

  6. Development of Army Fire-Resistant Diesel Fuel.

    Science.gov (United States)

    1979-12-01

    45 C C Service Station Fuel Semple 85 A 75B AB C C 95 95 Service Station Fuel Sample 8 00 A -7B\\ A -7s C Refiney Fu UNMODIFIED* MODIFIED* SURFACTANT...Change in Brake Power, % -11.2 Change in Brake Specific Volumetric Fuel Consumption, % +17.7 Change in Thermal Efficiency of Work Cycle, abs % - 1.6...and unmodified surfactant) 2. Cladosporium resinae . 3. ASTM mixed fungal spore inoculum (only with item A5 and with item A4 made with deionized water

  7. Design and analytic evaluation of a rim effect reduction type LWR fuel for extending burnup

    International Nuclear Information System (INIS)

    Matsumura, Tetsuo; Kameyama, Takanori; Kinoshita, Motoyasu

    1991-01-01

    We have designed a new concept fuel design 'Rim effect reduction type fuel' which has thin natural UO 2 layer on surface of a UO2 pellet. Our neutronic analyses with ANRB code show this fuel design can reduce rim effect (burnup at plelet rim) by about 30 GWd/t comparing a normal fuel. It is known that a high burnup fuel has different microstructure from as-fabricated one at fuel rim (which is called as rim region) due to rim effect. Therefore this fuel design can expect smaller rim region than a normal fuel. Our fuel performance analyses with EIMUS code show this fuel design can reduce fuel center temperature at high burnup if thermal conductivity of fuel pellet decreases with burnup in inverse proportion. However, this fuel design increases fuel center temperature at low and middle burnup than a normal fuel due to increase of thermal power density at pellet center. Additionally Irradiation experiment of this fuel design can be considered to offer important data which make clear the relation between rim effect and fuel performance. (author)

  8. Reductions of PAH and Soot by Center Air Injection

    Directory of Open Access Journals (Sweden)

    Kazuhiro Yamamoto

    2014-07-01

    Full Text Available In this study, to reduce the amount of pollutant PAH and soot in the flame, we examined the burner system equipped with a center air injection. For this purpose, by using PAH-LIF and soot LII, we evaluated relative PAH and soot amounts in both the triple port burner and the conventional co-axial burner (double port burner to discuss effects of center air injection on the formation of PAH and soot. The fuel was propane. In the triple port burner, two different blue flames are observed near the burner rim, followed by bright luminous flames with soot. The flame length is longer when the fuel flow velocity is increased. On the other hand, the flame length is shorter with an increase in internal air flow velocity. As for PAH and soot, these amounts of the triple port burner are much smaller than those of the double port burner. For the triple port burner, due to the center air injection, the fuel consumption occurs in both inner and outer flames. On the other hand, for the double port burner, the oxygen is supplied from one side air, and as a result, the fuel consumption rate is relatively lower. Hence, by the center air injection, the fuel consumption is largely accelerated, resulting in the reduction of PAH and soot.

  9. Planar Solid-Oxide Fuel Cell System Demonstration at UT SimCenter

    Science.gov (United States)

    2015-12-09

    Optimization of Chemically Reacting Flows in Catalytic Monoliths", PhD Thesis, University of Heidelberg, 2005. [55] David G. Goodwin, Harry K. Moffat...Berry. Fuel Cells: Technologies for Fuel Processing. Oxford: Elsevier, 2011 [114] J. Pasel, J. Meissner, Z. Pors, C. Palm, P. Cremer , R. Peters, D

  10. Report on the feasibility study for improving electric motor service centers in Ghana

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, J.S.; Jallouk, P.A.; Staunton, R.H.

    1999-12-10

    On March 3 and 4, 1998, a visit was made to Oak Ridge National Laboratory (ORNL) by two officials from Ghana: Mr. I.K. Mintah, Acting Executive Director, Technical Wing, Ministry of Mines and Energy (MOME) and Dr. A.K. Ofosu-Ahenkorah, Coordinator, Energy Efficiency and Conservation Program, MOME. As a result of this visit, Dr. John S. Hsu of ORNL was invited by MOME to visit the Republic of Ghana in order to study the feasibility of improving electric motor service centers in Ghana.

  11. PTSD: National Center for PTSD

    Medline Plus

    Full Text Available ... Locator Hospitals and Clinics Vet Centers Regional Benefits Offices Regional Loan Centers Cemetery Locations Get help from ... Resource Directory Grants Management Services Veterans Service Organizations Office of Accountability & Whistleblower Protection Transparency Media Room Inside ...

  12. Implementation of Cooperative Learning in the Center for Community Service and Continuing Education at Kuwait University

    Science.gov (United States)

    Alansari, Eissa M.

    2006-01-01

    The purpose of this study is to review the success of implementation of cooperative learning in various courses delivered at the Center for Community Service and Continuing Education at Kuwait University. According to recent research in the field of social cognition, learning situations which make use of the social context often achieve superior…

  13. Social science to improve fuels management: a synthesis of research on assessing social acceptability of fuels treatments

    Science.gov (United States)

    Terry C. Daniel; Michael Valdiserri; Carrie R. Daniel; Pamela Jakes; Pamela Jakes; Susan Barro

    2005-01-01

    A series of syntheses were commissioned by the USDA Forest Service to aid in fuels mitigation project planning. This synthesis focuses on research for assessing the social acceptability of fuels treatments. The synthesis is structured around six important considerations for any social acceptability assessment: defining the fuels treatments being assessed; representing...

  14. Alternative fuel news: Official publication of the clean cities network and the alternative fuels data center, Vol. 4, No. 1

    Energy Technology Data Exchange (ETDEWEB)

    NREL

    2000-03-27

    This issue of Alternative Fuel News contains information on the upcoming Clean Cities Conference to be held May 7--10, 2000 in San Diego, California. Highlighted in this issue is the success of the Clean Cities Program in creating clean corridors that permit fleets that serve multiple cities to purchase AFVs with confidence, knowing that fueling convenience and supply will not be a problem. Also look for articles on electric vehicles, transit buses; state and fuel provider enforcement; the Salt Lake and Greater Long Island Clean Cities coalitions, HEVs and fuel cells are a big hit at auto shows; DOE awards alternative fuel grants to 33 National Parks; and the Energy Policy Act (EPAct) Section 506 report.

  15. FCTESTNET - Testing fuel cells for transportation

    NARCIS (Netherlands)

    Winkel, R.G.; Foster, D.L.; Smokers, R.T.M.

    2006-01-01

    FCTESTNET (Fuel Cell Testing and Standardization Network) is an ongoing European network project within Framework Program 5. It is a three-year project that commenced January 2003, with 55 partners from European research centers, universities, and industry, working in the field of fuel cell R and D.

  16. Alternative Fuels Data Center: South Dakota Transportation Data for

    Science.gov (United States)

    Grants Ethanol and Methanol Tax Liquefied Natural Gas (LNG) Tax Biofuel Franchising Contract Regulations Natural Gas Transportation Fuel Consumption Source: State Energy Data System based on beta data converted

  17. Coherence of reactor design and fuel element design

    International Nuclear Information System (INIS)

    Vom Scheidt, S.

    1995-01-01

    Its background of more than 25 years of experience makes Framatome the world's leading company in the design and sales of fuel elements for pressurized water reactors (PWR). In 1994, the fuel fabrication units were incorporated as subsidiaries, which further strengthens the company's position. The activities in the fuel sector comprise fuel element design, selection and sourcing of materials, fuel element fabrication, and the services associated with nuclear fuel. Design responsibility lies with the Design and sales Management, which closely cooperates with the engineers of the reactor plant for which the fuel elements are being designed, for fuel elements are inseparable parts of the respective reactors. The Design and Sales Management also has developed a complete line of services associated with fuel element inspection and repair. As far as fuel element sales are concerned, Framatome delivers the first core in order to be able to assume full responsibility vis-a-vis the customer for the performance of the nuclear steam supply system. Reloads are sold through the Fragema Association established by Framatome and Cogema. (orig.) [de

  18. Regional fuel cycle centres for South and South-East Asia

    International Nuclear Information System (INIS)

    Ali, M.I.

    1977-01-01

    A brief preliminary analysis of the economic feasibility of regional fuel cycle centres in South and South-East Asia is presented. The indicative break-even costs and break-even plant sizes for the various fuel cycle services are estimated and the timing for their establishment on the basis of IAEA and ESCAP nuclear power projections in the region are shown. The paper discusses the need for achieving regional self-sufficiency for nuclear fuel services and suggests that a detailed study should be undertaken by the IAEA in close co-operation with the countries of the region to find out their requirements for nuclear fuel services. (author)

  19. Secure Cloud-Based Solutions for Different eHealth Services in Spanish Rural Health Centers.

    Science.gov (United States)

    de la Torre-Díez, Isabel; Lopez-Coronado, Miguel; Garcia-Zapirain Soto, Begonya; Mendez-Zorrilla, Amaia

    2015-07-27

    The combination of eHealth applications and/or services with cloud technology provides health care staff—with sufficient mobility and accessibility for them—to be able to transparently check any data they may need without having to worry about its physical location. The main aim of this paper is to put forward secure cloud-based solutions for a range of eHealth services such as electronic health records (EHRs), telecardiology, teleconsultation, and telediagnosis. The scenario chosen for introducing the services is a set of four rural health centers located within the same Spanish region. iCanCloud software was used to perform simulations in the proposed scenario. We chose online traffic and the cost per unit in terms of time as the parameters for choosing the secure solution on the most optimum cloud for each service. We suggest that load balancers always be fitted for all solutions in communication together with several Internet service providers and that smartcards be used to maintain identity to an appropriate extent. The solutions offered via private cloud for EHRs, teleconsultation, and telediagnosis services require a volume of online traffic calculated at being able to reach 2 Gbps per consultation. This may entail an average cost of €500/month. The security solutions put forward for each eHealth service constitute an attempt to centralize all information on the cloud, thus offering greater accessibility to medical information in the case of EHRs alongside more reliable diagnoses and treatment for telecardiology, telediagnosis, and teleconsultation services. Therefore, better health care for the rural patient can be obtained at a reasonable cost.

  20. Secure Cloud-Based Solutions for Different eHealth Services in Spanish Rural Health Centers

    Science.gov (United States)

    2015-01-01

    Background The combination of eHealth applications and/or services with cloud technology provides health care staff—with sufficient mobility and accessibility for them—to be able to transparently check any data they may need without having to worry about its physical location. Objective The main aim of this paper is to put forward secure cloud-based solutions for a range of eHealth services such as electronic health records (EHRs), telecardiology, teleconsultation, and telediagnosis. Methods The scenario chosen for introducing the services is a set of four rural health centers located within the same Spanish region. iCanCloud software was used to perform simulations in the proposed scenario. We chose online traffic and the cost per unit in terms of time as the parameters for choosing the secure solution on the most optimum cloud for each service. Results We suggest that load balancers always be fitted for all solutions in communication together with several Internet service providers and that smartcards be used to maintain identity to an appropriate extent. The solutions offered via private cloud for EHRs, teleconsultation, and telediagnosis services require a volume of online traffic calculated at being able to reach 2 Gbps per consultation. This may entail an average cost of €500/month. Conclusions The security solutions put forward for each eHealth service constitute an attempt to centralize all information on the cloud, thus offering greater accessibility to medical information in the case of EHRs alongside more reliable diagnoses and treatment for telecardiology, telediagnosis, and teleconsultation services. Therefore, better health care for the rural patient can be obtained at a reasonable cost. PMID:26215155

  1. Market driven strategy for acquisition of waste acceptance and transportation services for commercial spent fuel in the United States

    International Nuclear Information System (INIS)

    Lemeshewky, W.; Macaluso, C.; Smith, P.; Teer, B.

    1998-05-01

    The Department of Energy has the responsibility for the shipment of spent nuclear fuel (SNF) from commercial reactors to a Federal facility for storage and/or disposal. DOE has developed a strategy for a market driven approach for the acquisition of transportation services and equipment which will maximize the participation of private industry. To implement this strategy, DOE is planning to issue a Request for Proposal (RFP) for the provision of the required services and equipment to accept SNF from the utilities and transport the SNF to a Federal facility. The paper discusses this strategy and describes the RFP

  2. Power reactor services provided by the Penn State Radiation Science and Engineering Center

    International Nuclear Information System (INIS)

    Voth, M.H.; Jester, W.A.

    1993-01-01

    The power reactor industry emerged from extensive research and development performed at nonpower reactors (NPRs). As the industry matures, NPRs continue to support and enhance power reactor technology. With the closure of many government and private industry NPRS, there is an increasing call for the 33 universities with operating research reactors to provide the needed services. The Penn State Radiation Science and Engineering Center (RSEC) includes a 1-MW pool-type pulsing TRIGA reactor, a neutron beam laboratory with real-time neutron radiography equipment, hot cells with master-slave manipulators for remote handling of radioactive materials, a gamma-ray irradiation pool, a low-level radiation monitoring laboratory, and extensive equipment for radiation monitoring, dosimetry, and material properties determination. While equipment is heavily utilized in the instructional and academic research programs, significant time remains available for service work. Cost recovery for service work generates income for personnel, equipment maintenance, and facility improvements. With decreasing federal and state funding for educational programs, it is increasingly important that facilities be fully utilized to generate supplementary revenue. The following are examples of such work performed at the RSEC

  3. Implementation an human resources shared services center: Multinational company strategy in fusion context

    Directory of Open Access Journals (Sweden)

    João Paulo Bittencourt

    2016-09-01

    Full Text Available The aim of this research was to analyze the process of implementation and management of the Shared Services Center for Human Resources, in a multinational company in the context of mergers and acquisitions. The company analyzed was called here Alpha, and is one of the largest food companies in the country that was born of a merger between Beta and Delta in 2008. The CSC may constitute a tool for strategic management of HR that allows repositioning of the role of the area in order to be more strategic at corporate level and more profitable at the operating level. The research was based on a descriptive and exploratory study of qualitative approach. Among the results, there is the fact that shared services were strategic to support, standardize and ensure the expansion of the company. The challenges found were associated with the development of a culture of service and the relationship with users and the definition of HR activities scope. The following management procedures include the adequacy of wage differences between employees, the career path limitation and the need to attract and retain talent and international expansion.

  4. Compilation of the FY 1997 Navy General Fund Financial Statements at the Defense Finance and Accounting Service Cleveland Center

    National Research Council Canada - National Science Library

    1998-01-01

    Audit Report on tile Compilation of the FY 1997 Navy General Fund Financial Statements at the Defense Finance and Accounting Service Cleveland Center Our objective was to determine whether the DFAS...

  5. Loads on pebble bed fuel elements

    Energy Technology Data Exchange (ETDEWEB)

    Teuchert, E.; Maly, V.

    1974-03-15

    A comparison is made of key parameters for multi-recycle pebbles and single-pass once-through (OTTO) pebbles. The parameters analyzed include heat transfer characteristics with burn-up, temperature profiles, power per element as a function of axial position in the core, and burn-up. For the OTTO-scheme, the comparisons addressed the use of the conventional fuel element and the advanced "shell ball" designed to reduce the peak fuel temperature in the center of the fuel element. All studies addressed the uranium-thorium fuel cycle.

  6. Clean Energy Solutions Center Services (Vietnamese Translation)

    Energy Technology Data Exchange (ETDEWEB)

    2016-03-01

    This is a Vietnamese translation of the Clean Energy Solutions Center fact sheet. The Solutions Center offers no-cost expert policy assistance, webinars and training forums, clean energy policy reports, data, and tools provided in partnership with more than 35 leading international and regional clean energy organizations.

  7. Clean Energy Solutions Center Services (Arabic Translation)

    Energy Technology Data Exchange (ETDEWEB)

    2016-03-01

    This is an Arabic translation of the Clean Energy Solutions Center fact sheet. The Solutions Center offers no-cost expert policy assistance, webinars and training forums, clean energy policy reports, data, and tools provided in partnership with more than 35 leading international and regional clean energy organizations.

  8. Clean Energy Solutions Center Services (French Translation)

    Energy Technology Data Exchange (ETDEWEB)

    2016-03-01

    This is a French translation of the Clean Energy Solutions Center fact sheet. The Solutions Center offers no-cost expert policy assistance, webinars and training forums, clean energy policy reports, data, and tools provided in partnership with more than 35 leading international and regional clean energy organizations.

  9. Heat-pump-centered integrated community energy systems: system development summary

    Energy Technology Data Exchange (ETDEWEB)

    Calm, J.M.

    1980-02-01

    An introduction to district heating systems employing heat pumps to enable use of low-temperature energy sources is presented. These systems operate as thermal utilities to provide space heating and may also supply space cooling, service-water heating, and other thermal services. Otherwise-wasted heat from industrial and commercial processes, natural sources including solar and geothermal heat, and heat stored on an annual cycle from summer cooling may be effectively utilized by the systems described. These sources are abundant, and their use would conserve scarce resources and reduce adverse environmental impacts. More than one-quarter of the energy consumed in the United States is used to heat and cool buildings and to heat service water. Natural gas and oil provide approximately 83% of this energy. The systems described show potential to reduce net energy consumption for these services by 20 to 50% and to allow fuel substitution with less-scarce resources not practical in smaller, individual-building systems. Seven studies performed for the system development phase of the Department of Energy's Heat-Pump-Centered Integrated Community Energy Systems Project and to related studies are summarized. A concluding chapter tabulates data from these separately published studies.

  10. Monitoring fuel consumption for reciprocating engines

    International Nuclear Information System (INIS)

    Zebelean, D.C.

    1991-01-01

    This paper reports that Northwest Pipeline Corp. has experienced substantial fuel cost savings through a program that provides continuous monitoring of predicted consumption against actual usage for reciprocating engines. With the continuous monitoring program, the company can gauge specific fuel consumption, flag inefficient engines and determine possible problems with computer software or hardware used to measure engine operations. The plan was initiated as part of an overall effort to reduce pipe line operating cost to remain market competitive by reducing cost of services to the customer. One of the factors in determining Northwest Pipeline's cost of service is the cost of fueling engines to transport natural gas. In 1990, Northwest consumed approximately 9,600,000 MMBtu in engine fuel. Fuel gas always has been accounted for and measured. However, the thermal efficiency of the fuel gas consumed was never quantified. Engineering management set a goal in 1989 to audit fuel consumption monthly on the basis of actual fuel consumed compared to the manufacturer's predicted consumption curves. The fuel consumption comparison between actual consumption with manufacturer's predicted consumption decreased 4% in six months after the first report was published. Unbalanced engines, faulty spark plugs, fuel valves, engines requiring overhauls, and even computer software and hardware problems were found, based on this report. Total decrease in the comparison of 4% was not all realized. Approximately 1.5% of the decrease was due to revising the manufacturer's fuel consumption curves to correctly predict Northwest's vintage of engine

  11. Nuclear fuel element

    International Nuclear Information System (INIS)

    Yamanaka, Tsuneyasu.

    1976-01-01

    Purpose: To provide a mechanism for the prevention of fuel pellet dislocation in fuel can throughout fuel fablication, fuel transportation and reactor operation. Constitution: A plenum spacer as a mechanism for the prevention of fuel pellet dislocation inserted into a cladding tube comprises split bodies bundled by a frame and an expansion body being capable of inserting into the central cavity of the split bodies. The expansion body is, for example, in a conical shape and the split bodies are formed so that they define in the center portion, when disposed along the inner wall of the cladding tube, a gap capable of inserting the conical body. The plenum spacer is assembled by initially inserting the split bodies in a closed state into the cladding tube after the loading of the pellets, pressing their peripheral portions and then inserting the expansion body into the space to urge the split bodies to the inner surface of the cladding tube. (Kawakami, Y.)

  12. Cornell Fuel Cell Institute: Materials Discovery to Enable Fuel Cell Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Abruna, H.D.; DiSalvo, Francis J.

    2012-06-29

    The discovery and understanding of new, improved materials to advance fuel cell technology are the objectives of the Cornell Fuel Cell Institute (CFCI) research program. CFCI was initially formed in 2003. This report highlights the accomplishments from 2006-2009. Many of the grand challenges in energy science and technology are based on the need for materials with greatly improved or even revolutionary properties and performance. This is certainly true for fuel cells, which have the promise of being highly efficient in the conversion of chemical energy to electrical energy. Fuel cells offer the possibility of efficiencies perhaps up to 90 % based on the free energy of reaction. Here, the challenges are clearly in the materials used to construct the heart of the fuel cell: the membrane electrode assembly (MEA). The MEA consists of two electrodes separated by an ionically conducting membrane. Each electrode is a nanocomposite of electronically conducting catalyst support, ionic conductor and open porosity, that together form three percolation networks that must connect to each catalyst nanoparticle; otherwise the catalyst is inactive. This report highlights the findings of the three years completing the CFCI funding, and incudes developments in materials for electrocatalyts, catalyst supports, materials with structured and functional porosity for electrodes, and novel electrolyte membranes. The report also discusses developments at understanding electrocatalytic mechanisms, especially on novel catalyst surfaces, plus in situ characterization techniques and contributions from theory. Much of the research of the CFCI continues within the Energy Materials Center at Cornell (emc2), a DOE funded, Office of Science Energy Frontier Research Center (EFRC).

  13. Exploring an Agenda of Accommodation and Support at a Disabilities Service Center for College Students with Psychiatric Disabilities

    OpenAIRE

    松田, 康子

    2016-01-01

    How useful are disability services in the current higher education for college students with psychiatric disabilities? The purpose of this research paper is to answer this question by exploring an agenda of accommodation and support at a disabilities service center for college students with psychiatric disabilities. Two studies were conducted using questionnaires to collect data from students (study 1) and staffs (teaching and clerical staff) (study 2) in higher education. The ...

  14. TopFuel 2003 conference report

    International Nuclear Information System (INIS)

    Anon.

    2003-01-01

    The international conference, TopFuel 2003 - Nuclear Fuel for Today and Tomorrow, Experience and Outlook, was held in Wuerzburg on March 16-19, 2003. The event, which was organized jointly by the Atomic Energy Society of Japan (AESJ), the American Nuclear Society (ANS), the German Nuclear Society and the European Nuclear Society (ENS), provided a comprehensive overview of current topics and developments in nuclear fuel supply in more than ninety papers and poster presentations. At the plenary session, more than 300 participants from 15 countries discussed basic problems of nuclear fuel development, safety research, strategies of nuclear fuel supply in the 21st century, fuel fabrication, interim storage of fuel elements, and problems of fuel element design for nuclear power plants of the next generation. Seven technical sessions dealt with other topical developments in these fields: - feedback of experience in fuel use, - nuclear fuel cycle efforts to increase burnup, - trends in nuclear fuel design, - advanced methods and codes, - fabrication, - transport, nuclear fuel services. (orig.) [de

  15. Failed fuel detector

    International Nuclear Information System (INIS)

    Onodera, Koichi.

    1981-01-01

    Purpose: To improve the reliability of detecting the failure of a fuel rod by imparting a wire disconnection detecting function to a central electrode at the center of a failure mode thereto. Constitution: A wire disconnection detecting terminal is provided at the terminal opposite to the signal output terminal of a central electrode in a failed fuel detector used for detecting the failure of a fuel rod in an atomic power plant using liquid metal as a coolant, and a voltage monitor for monitoring the terminal voltage is connected to the terminal. The disconnection of the central electrode is detected by the failure of the output of the voltage monitor, and an alarm is thus generated. (Aizawa, K.)

  16. Thermal fuel research and development facilities in BNFL

    International Nuclear Information System (INIS)

    Roberts, V.A.; Vickers, J.

    1996-01-01

    BNFL is committed to providing high quality, cost effective nuclear fuel cycle services to customers on a National and International level. BNFL's services, products and expertise span the complete fuel cycle; from fuel manufacture through to fuel reprocessing, transport, waste management and decommissioning and the Company maintains its technical and commercial lead by investment in continued research and development (R and D). This paper discusses BNFL's involvement in R and D and gives an account of the current facilities available together with a description of the advanced R and D facilities constructed or planned at Springfields and Sellafield. It outlines the work being carried out to support the company fuel technology business, to (1) develop more cost effective routes to existing fuel products; (2) maximize the use of recycled uranium, plutonium and tails uranium and (3) support a successful MOX business

  17. Utilization of Dental Services in Public Health Center: Dental Attendance, Awareness and Felt Needs.

    Science.gov (United States)

    Pewa, Preksha; Garla, Bharath K; Dagli, Rushabh; Bhateja, Geetika Arora; Solanki, Jitendra

    2015-10-01

    In rural India, dental diseases occur due to many factors, which includes inadequate or improper use of fluoride and a lack of knowledge regarding oral health and oral hygiene, which prevent proper screening and dental care of oral diseases. The objective of the study was to evaluate the dental attendance, awareness and utilization of dental services in public health center. A cross-sectional study was conducted among 251 study subjects who were visiting dental outpatient department (OPD) of public health centre (PHC), Guda Bishnoi, and Jodhpur using a pretested proforma from month of July 2014 to October 2014. A pretested questionnaire was used to collect the data regarding socioeconomic status and demographic factors affecting the utilization of dental services. Pearson's Chi-square test and step-wise logistic regression were applied for the analysis. Statistically significant results were found in relation to age, educational status, socioeconomic status and gender with dental attendance, dental awareness and felt needs. p-value dental services, thereby increasing the oral health status of the population.

  18. Methodological Proposal for Identification and Evaluation of Environmental Aspects and Impacts of IPEN Nuclear Facilities: A Case Study Applied to the Nuclear Fuel Center

    International Nuclear Information System (INIS)

    Mattos, Luis A. Terribile de; Filho, Tufic Madi; Meldonian, Nelson Leon

    2013-06-01

    This work presents an application of Failure Mode Effect Analysis (FMEA) to the process of identification of environmental aspects and impacts as a part of implementation and maintenance of an Environmental Management System (EMS) in accordance with the ISO 14001 standard. Also, it can contribute, as a complement, to the evaluation and improvement of safety of the installation focused. The study was applied to the Nuclear Fuel Center (CCN) of Nuclear and Energy Research Institute (IPEN), situated at the Campus of University of Sao Paulo, Brazil. The CCN facility has the objective of promoting scientific research and of producing nuclear fuel elements for the IEA-R1 Research Reactor. To identify the environmental aspects of the facility activities, products, and services, a systematic data collection was carried out by means of personal interviews, documents, reports and operation data records consulting. Furthermore, the processes and their interactions, failure modes, besides their causes and effects to the environment, were identified. As a result of a careful evaluation of these causes it was possible to identify and to classify the major potential environmental impacts, in order to set up and put in practice an Environmental Control Plan for the installation under study. The results have demonstrated the validity of the FMEA application to nuclear facility processes, identifying environmental aspects and impacts, whose controls are critical to achieve compliance with the environmental requirements of the Integrated Management System of IPEN. It was demonstrated that the methodology used in this work is a powerful management tool for resolving issues related to the conformity with applicable regulatory and legal requirements of the Brazilian Nuclear Energy Commission (CNEN) and the Brazilian Institute of Environment (IBAMA). (authors)

  19. Cleanup of a HLW nuclear fuel-reprocessing center using 3-D database modeling technology

    International Nuclear Information System (INIS)

    Sauer, R.C.

    1992-01-01

    A significant challenge in decommissioning any large nuclear facility is how to solidify the large volume of residual high-level radioactive waste (HLW) without structurally interfering with the existing equipment and piping used at the original facility or would require rework due to interferences which were not identified during the design process. This problem is further compounded when the nuclear facility to be decommissioned is a 35 year old nuclear fuel reprocessing center designed to recover usable uranium and plutonium. Facilities of this vintage usually tend to lack full documentation of design changes made over the years and as a result, crude traps or pockets of high-level contamination may not be fully realized. Any miscalculation in the construction or modification sequences could compound the overall dismantling and decontamination of the facility. This paper reports that development of a 3-dimensional (3-D) computer database tool was considered critical in defining the most complex portions of this one-of-a-kind vitrification facility

  20. Strategic Partnerships in Fuel Cell Development

    Science.gov (United States)

    Diab, Dorey

    2006-01-01

    This article describes how forming strategic alliances with universities, emerging technology companies, the state of Ohio, the federal government, and the National Science Foundation, has enabled Stark State College to develop a $5.5 million Fuel Cell Prototyping Center and establish a Fuel Cell Technology program to promote economic development…

  1. Fuel conservation: the airline - ATC

    Energy Technology Data Exchange (ETDEWEB)

    Grundy, P.M.

    1982-05-01

    The air traffic control system has a greater impact on fuel conservation than any other factor in aviation, the most energy intensive industry in the world. The article discusses various measures that could be adopted by airlines and air traffic controllers to increase fuel conservation. These include: reducing operating empty weights, flying at optimum altitude, direct routing, linear holding, speed control, flight planning, loading for favorable center of gravity to reduce trim drag, minimizing route mileage, and clearance priorities for more fuel demanding aircraft during landing.

  2. Utilization of Mental Health Services in School-Based Health Centers.

    Science.gov (United States)

    Bains, Ranbir M; Cusson, Regina; White-Frese, Jesse; Walsh, Stephen

    2017-08-01

    We summarize utilization patterns for mental health services in school-based health centers. Administrative data on school-based health center visits in New Haven, Connecticut were examined for the 2007-2009 school years. Relative frequencies of mental health visits by age were calculated as a percentage of all visits and were stratified by sex, ethnicity/race, and insurance status. Mental health visits accounted for the highest proportion of visits (31.8%). The proportion of mental health visits was highest at 8 years (42.8%) and at 13 years (39.0%). The proportion of mental health visits among boys (38.4%) was higher than among girls (26.7%). Hispanic students had a lower proportion of mental health visits than black students (23.5% vs 35.8%) in all but 2 age groups. Students in the white/other ethnicity category had higher proportions of mental health visits than Hispanic and black students between ages 12 and 15. Students with no health insurance (22.5%) had lower proportions of mental health visits than students covered by Medicaid (34.3%) or private insurance (33.9%). The percentage of mental health visits by students with private insurance was highest (37.2%-49%) in the 13-15 age range. Usage patterns for mental health issues show pronounced, nonrandom variation relative to age and other demographic characteristics especially with 8-year-old boys. © 2017, American School Health Association.

  3. Alternative Fuel News: Official Publication of the Clean Cities Network and the Alternative Fuels Data Center, Vol. 5, No. 3

    Energy Technology Data Exchange (ETDEWEB)

    2001-11-01

    A quarterly magazine with articles on alternative fuel school buses, the market growth of biodiesel fuel, National AFV Day 2002, model year 2002 alternative fuel passenger cars and light trucks, the Michelin Challenge Bibendum road rally, and advanced technology vehicles at Robins Air Force Base, the Top Ten Clean Cities coalitions for 2000, and AFVs on college campuses.

  4. Increased burnup of fuel elements

    International Nuclear Information System (INIS)

    Ahlf, J.

    1983-01-01

    The specialists' group for fuel elements of the Kerntechnische Gesellschaft e.V. held a meeting on ''Increased Burnup of Fuel Elements'' on 9th and 10th of November 1982 at the GKSS Research Center Geesthacht. Most papers dealt with the problems of burnup increase of fuel elements for light water reactors with respect to fuel manufacturing, power plant operation and reprocessing. Review papers were given on the burnup limits for high temperature gas cooled reactors and sodium fast breeder reactors. The meeting ended with a presentation of the technical equipment of the hot laboratory of the GKSS and the programs which are in progress there. (orig.) [de

  5. Simulation assessment center in the service of the company as a factor in the accuracy and validity of the information about the employee

    OpenAIRE

    Borodai V.A.

    2017-01-01

    The article reveals the relevance of evaluation method for personnel assessment center technologies. The efficiency of the method in terms of accuracy and validity of the assessment of employees. Identified positive factors and problematic use of assessment center technology service company/

  6. Decommissioning Operations at the Cadarache Nuclear Research Center

    International Nuclear Information System (INIS)

    Gouhier, E.

    2008-01-01

    Among the different activities of the CEA research center of Cadarache, located in the south of France, one of the most important involves decommissioning. As old facilities close, decommissioning activity increases. This presentation will give an overview of the existing organization and the different ongoing decommissioning and cleanup operations on the site. We shall also present some of the new facilities under construction the purpose of which is to replace the decommissioned ones. Cadarache research center was created on October 14, 1959. Today, the activities of the research center are shared out among several technological R and D platforms, essentially devoted to nuclear energy (fission and fusion) Acting as a support to these R and D activities, the center of Cadarache has a platform of services which groups the auxiliary services required by the nuclear facilities and those necessary to the management of nuclear materials, waste, nuclear facility releases and decommissioning. Many old facilities have shut down in recent years (replaced by new facilities) and a whole decommissioning program is now underway involving the dismantling of nuclear reactors (Rapsodie, Harmonie), processing facilities (ATUE uranium treatment facility, LECA UO 2 facility) as well as waste treatment and storage facilities (INB37, INB 56. In conclusion: other dismantling and cleanup operations that are now underway in Cadarache include the following: - Waste treatment and storage facilities, - Historical VLLW and HLW storage facility, - Fissile material storage building, - Historical spent fuel storage facility. Thanks to the project organization: - Costs and risks on these projects can be reduced. - Engineers and technicians can easily move from one project to another. In some cases, when a new facility is under construction for the purpose of replacing a decommissioned one, some of the project team can integrate the new facility as members of the operation team. Today

  7. Perilaku Kreatif Pekerja Call Center: Peran Komunikasi dan Dukungan Training Center

    Directory of Open Access Journals (Sweden)

    Nugroho J. Setiadi

    2013-11-01

    Full Text Available Call center business in Indonesia is growing rapidly worldwide. This condition has had repercussions for a growing number of call center workers needed. They are forced to be more creative in performing their duties. This study aims to determine the role of communication and training center in supporting the creative performance of workers in call centers. The survey was conducted by distributing questionnaires to 100 respondents (employees of the 3 major companies in the field of telecommunication services in Indonesia. Regression analysis was used to analyze the data to examine the role of communication and training support center on creative performance. The results indicated that communication and training support center significantly influence the creative behavior in call center workers. Communication quality shown in the telecommunication service provider companies, such as the media quality, simplicity of information, dissemination of information, loads of information, and accuracy of messages, has shown good quality. In addition, the training program has shown its support for call center workers in the form of program effectiveness through research and data collection, determining the materials, training methods, choosing a coach, preparing facilities, selecting and implementing the program.

  8. A worldwide fuel strategy by AREVA

    International Nuclear Information System (INIS)

    Bordy, Michel

    2004-01-01

    Operating as a global company, inside AREVA the Fuel Sector implements a common strategy among three Business Units of fuel activities. These Business Units which are in Framatome ANP Zirconium, Manufacturing and Design and Sales Units, are operated in Germany (former Siemens activity), in USA (former BWFC Babcock and Wilcox Fuel Co,. and SPC Siemens Power Co. activities), in Belgium and in France (former Framatome activity). They have resources and facilities which are cooperatively working on R and D, engineering, project management, sales and services to achieve synergy on a cross-business basis. Based on its experience of worldwide activities and taking advantage of its diversified fuel design knowledge, Framatome ANP proposes a full range of fuel products and services on the BWR and PWR markets. With the ability to supply all fuel assembly arrays and fuel pellet types, supplemented by the range of stationary and movable core components, and completed by a full-range of on-site fuel services and performance of fuel packing and delivery, Framatome ANP is positioned as a major participant on the world fuel market. Today, Framatome ANP takes advantage of the cross-fertilization in the short term of existing products which include four original PWR fuel designs of HTP TM alloy as the reference material for cladding tubes, guide thimbles, and grids, -- Gradual incorporation of the valuable high-stiffiness MONOBLOC tM guide thimble, -- Progressive integressive integration of the High Mechanical Performance (HMP) Inconel end grid, -- Planned standardization of mechanical components such as nozzles, holddown systems and top and bottom connections. As a continuation of its existing technology, Framatome ANP is developing improved technical features within the scope of the Alliance fuel assembly qualification program. With an irradiation program ranging up to a burnup of 70 MWd/kgU expected to be reached in 2006, Alliance shows excellent behaviour with very low corrosion

  9. Improving the service life and performance of CANDU fuel channels

    International Nuclear Information System (INIS)

    Coleman, C.E.; Cheadle, B.A.; Causey, A.R.; Doubt, G.L.; Fong, R.W.L.; Venkatapathi, S.

    1996-03-01

    The development objective for CANDU fuel channels is to produce a design that can operate for 40 years at 90% capacity. Steady progress toward this objective is being made. The factors that determine the life of a CANDU fuel channel are reviewed and the processes necessary to achieve the objectives are identified. Performance of future fuel channels will be enhanced by reduced operating costs and increased safety margins to postulated accident conditions compared with those for current channels. The approaches to these issues are discussed briefly in this report. (author)

  10. Business Case Analysis of the Walter Reed Army Medical Center Medical/Surgical Prime Vendor Generation III Service Level Electron Program

    National Research Council Canada - National Science Library

    Markot, Peter B

    2007-01-01

    ...) staffing and medical/surgical services offered under the Prime Vendor (PV) Generation III contract would provide the best supply chain management solution for Walter Reed Army Medical Center (WRAMC...

  11. Pre-conceptual core design of SCWR with annular fuel rods

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Chuanqi [Key Laboratory of Thermo-Fluid Science and Engineering of MOE, School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an, Shaanxi 710049 (China); School of Nuclear Science and Technology, Xi’an Jiaotong University, Xi’an, Shaanxi 710049 (China); Cao, Liangzhi, E-mail: caolz@mail.xjtu.edu.cn [Key Laboratory of Thermo-Fluid Science and Engineering of MOE, School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an, Shaanxi 710049 (China); School of Nuclear Science and Technology, Xi’an Jiaotong University, Xi’an, Shaanxi 710049 (China); Wu, Hongchun; Zheng, Youqi [School of Nuclear Science and Technology, Xi’an Jiaotong University, Xi’an, Shaanxi 710049 (China)

    2014-02-15

    Highlights: • Annular fuel with both internal and external cooling is used in supercritical light water reactor (SCWR). • The geometry of the annular fuel has been optimized to achieve better performance for the SCWR. • Based on the annular fuel assembly, an equilibrium core has been designed. • The results show that the equilibrium core has satisfied all the objectives and design criteria. - Abstract: The new design of supercritical light water reactor was proposed using annular fuel assemblies. Annular fuel consists of several concentric rings. Feed water flows through the center and outside of the fuel to give both internal and external cooling. Thanks to this feature, the fuel center temperature and the cladding temperature can be reduced and high power density can be achieved. The water flowing through the center also provides moderation, so there is no need for extra water rods in the assembly. The power distribution can be easily flattened by use of this design. The geometry of the annular fuel has been optimized to achieve better performance for the SCWR. There are 19 fuel pins in an assembly. Burnable poison is utilized to reduce the initial excess reactivity. The fuel reloading pattern and water flow scheme were optimized to achieve more uniform power distribution and lower cladding temperature. An equilibrium core has been designed and analyzed using three dimensional neutronics and thermal-hydraulics coupling calculations. The void reactivity, Doppler coefficient and cold shut down margin were calculated for safety consideration. The present results show that this concept is a promising design for the SCWR.

  12. Primary care program improves reimbursement. The Federally Qualified Health Center program helps hospitals improve services to the medically indigent.

    Science.gov (United States)

    Fahey, T M; Gallitano, D G

    1993-03-01

    Under a program created by Congress in 1989, certain primary care treatment centers serving the medically and economically indigent can become Federally Qualified Health Centers (FQHCs). Recently enacted rules and regulations allow participants in the FQHC program to receive 100 percent reasonable cost reimbursement for Medicaid services and 80 percent for Medicare services. An all-inclusive annual cost report is the basis for determining reimbursement rates. The report factors in such expenses as physician and other healthcare and professional salaries and benefits, medical supplies, certain equipment depreciation, and overhead for facility and administrative costs. Both Medicaid and Medicare reimbursement is based on an encounter rate, and states employ various methodologies to determine the reimbursement level. In Illinois, for example, typical reimbursement for a qualified encounter ranges from $70 to $88. To obtain FQHC status, an organization must demonstrate community need, deliver the appropriate range of healthcare services, satisfy management and finance requirements, and function under a community-based governing board. In addition, an FQHC must provide primary healthcare by physicians and (where appropriate) midlevel practitioners; it must also offer its community diagnostic laboratory and x-ray services, preventive healthcare and dental care, case management, pharmacy services, and arrangements for emergency services. Because FQHCs must be freestanding facilities, establishing them can trigger a number of ancillary legal issues, such as those involved in forming a new corporation, complying with not-for-profit corporation regulations, applying for tax-exempt status, and applying for various property and sales tax exemptions. Hospitals that establish FQHCs must also be prepared to relinquish direct control over the delivery of primary care services.

  13. The Back End of the Fuel Cycle Moves Front and Center

    International Nuclear Information System (INIS)

    Isaacs, T; Choi, J

    2005-01-01

    For many years, the commercial nuclear business has remained relatively stable in many ways. That is unlikely to be the case in the coming years. While some countries have called for the phase out of nuclear power and others have ordered a small number of new plants, the overall profile of the nuclear power business has changed little. The number of countries with nuclear power plants is not much different than 10 years ago and the total number of operating plants has increased only slightly. Commercial enrichment and reprocessing services have remained the province of a few countries and consortia. Repository programs have moved forward slowly in some cases, backward in others, with a very small number making substantial progress. We are now witnessing the beginnings of serious change, with significant consequences for the future nuclear regime. Business as usual will not be the business of the future. The way the nuclear and policy community respond will have much to do with energy adequacy, national security, international stability, and environmental consequences including waste management and disposal. A number of events and trends are becoming increasingly apparent and are cause for both opportunity and caution: (1) New nuclear power plant orders are likely to grow and spread, particularly in the developing world, e.g. China and India. (2) The growing recognition that the developing world will be a major competitor for limited energy resources is raising awareness in the developed world regarding concerns for future energy security. (3) Clearer evidence of the effects of greenhouse gas emissions on global warming, largely from the burning of fossil fuels, is creating more attention on the environmental benefits of nuclear power. (4) The last decade has shown unequivocal evidence of countries lying, cheating on their NPT obligation, and covertly carrying out nuclear weapons-related activities. Some countries have suggested their presumed need for a domestic

  14. Electronuclear fissile fuel production. Linear accelerator fuel regenerator and producer LAFR and LAFP

    International Nuclear Information System (INIS)

    Steinberg, M.; Powell, J.R.; Takahashi, H.; Grand, P.; Kouts, H.J.C.

    1978-04-01

    A linear accelerator fuel generator is proposed to enrich naturally occurring fertile U-238 or thorium 232 with fissile Pu-239 or U-233 for use in LWR power reactors. High energy proton beams in the range of 1 to 3 GeV energy are made to impinge on a centrally located dispersed liquid lead target producing spallation neutrons which are then absorbed by a surrounding assembly of fabricated LWR fuel elements. The accelerator-target design is reviewed and a typical fuel cycle system and economic analysis is presented. One 300 MW beam (300 ma-1 GeV) linear accelerator fuel regenerator can provide fuel for 3 to 1000 MW(e) LWR power reactors over its 30-year lifetime. There is a significant saving in natural uranium requirement which is a factor of 4.5 over the present LWR fuel requirement assuming the restraint of no fissile fuel recovery by reprocessing. A modest increase (approximately 10%) in fuel cycle and power production cost is incurred over the present LWR fuel cycle cost. The linear accelerator fuel regenerator and producer assures a long-term supply of fuel for the LWR power economy even with the restraint of the non-proliferation policy of no reprocessing. It can also supply hot-denatured thorium U-233 fuel operating in a secured reprocessing fuel center

  15. Demonstration of Subscale Cermet Fuel Specimen Fabrication Approach Using Spark Plasma Sintering and Diffusion Bonding

    Science.gov (United States)

    Barnes, Marvin W.; Tucker, Dennis S.; Benensky, Kelsa M.

    2018-01-01

    Nuclear thermal propulsion (NTP) has the potential to expand the limits of human space exploration by enabling crewed missions to Mars and beyond. The viability of NTP hinges on the development of a robust nuclear fuel material that can perform in the harsh operating environment (> or = 2500K, reactive hydrogen) of a nuclear thermal rocket (NTR) engine. Efforts are ongoing to develop fuel material and to assemble fuel elements that will be stable during the service life of an NTR. Ceramic-metal (cermet) fuels are being actively pursued by NASA Marshall Space Flight Center (MSFC) due to their demonstrated high-temperature stability and hydrogen compatibility. Building on past cermet fuel development research, experiments were conducted to investigate a modern fabrication approach for cermet fuel elements. The experiments used consolidated tungsten (W)-60vol%zirconia (ZrO2) compacts that were formed via spark plasma sintering (SPS). The consolidated compacts were stacked and diffusion bonded to assess the integrity of the bond lines and internal cooling channel cladding. The assessment included hot hydrogen testing of the manufactured surrogate fuel and pure W for 45 minutes at 2500 K in the compact fuel element environmental test (CFEET) system. Performance of bonded W-ZrO2 rods was compared to bonded pure W rods to access bond line integrity and composite stability. Bonded surrogate fuels retained structural integrity throughout testing and incurred minimal mass loss.

  16. Alternative Fuels Data Center: Connecting Dots and Bridging Gaps:

    Science.gov (United States)

    access to fueling stations, AFV corridor signage on highways increases public awareness. Intra-State of 55 designated corridors covers 35 states. DOT categorized corridors as "signage ready," ; or "signage pending." Corridors are designated "signage ready" if there are

  17. Accuracy of fuel motion measurements using in-core detectors

    International Nuclear Information System (INIS)

    Dupree, S.A.

    1975-01-01

    An initial assessment has been made as to how accurately fuel motion can be measured with in-core detectors. A portion of this assessment has involved the calculation of the response of various detectors to fuel motion and the development of a formalism for correlating uncertainties in a neutron flux measurement to uncertainties in the fuel motion. Initially, four idealized configurations were studied in one dimension. These configurations consisted of (1) a single fuel-pin test using ACPR, (2) a seven fuel-pin test using ACPR, (3) a full subassembly (271 pin) test using a Class I ANL-type SAREF, and (4) a full subassembly plus six partial subassemblies (approximately 1000 pin) test using a Class III GE-type SAREF. It was assumed that melt would occur symmetrically at the center of the test fuel and that fuel would therefore disappear from the center of the geometry. For each case of series of calculations was performed in which detector responses were determined at several radial locations for the unperturbed core and for the core with various fractions of the fuel replaced with Na. This fuel loss was assumed to occur essentially instantaneously such that the power level in the remaining portion of the test fuel remained unchanged from that of the initial unperturbed condition

  18. Fuel safety research 1999

    Energy Technology Data Exchange (ETDEWEB)

    Uetsuka, Hiroshi (ed.) [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2000-07-01

    In April 1999, the Fuel Safety Research Laboratory was newly established as a result of reorganization of the Nuclear Safety Research Center, JAERI. The laboratory was organized by combining three laboratories, the Reactivity Accident Laboratory, the Fuel Reliability Laboratory, and a part of the Sever Accident Research Laboratory. Consequently, the Fuel Safety Research Laboratory is now in charge of all the fuel safety research in JAERI. Various types of experimental and analytical researches are conducted in the laboratory by using the unique facilities such as the Nuclear Safety Research Reactor (NSRR), the Japan Material Testing Reactor (JMTR), the Japan Research Reactor 3 (JRR-3) and hot cells in JAERI. The laboratory consists of five research groups corresponding to each research fields. They are; (a) Research group of fuel behavior under the reactivity initiated accident conditions (RIA group). (b) Research group of fuel behavior under the loss-of-coolant accident conditions (LOCA group). (c) Research group of fuel behavior under the normal operation conditions (JMTR/BOCA group). (d) Research group of fuel behavior analysis (FEMAXI group). (e) Research group of FP release/transport behavior from irradiated fuel (VEGA group). This report summarizes the outline of research activities and major outcomes of the research executed in 1999 in the Fuel Safety Research Laboratory. (author)

  19. The Needs Assessment in order to develop the Service of Psychological Lab and Counseling Center, Department of Educational Psychology and Guidance, the Faculty of Education, Mahasarakham University

    Directory of Open Access Journals (Sweden)

    Chaiporn Pongpisanrat

    2017-03-01

    Full Text Available The purpose of this study was to explore the needs assessment in order to develop the service of Psychological Lab and Counseling Center, Department of Educational Psychology and Guidance, the Faculty of Education, Mahasarakham University. This study aimed to compare the realistic service and the desirable service, as well as, to explore the directions to improve the service of Psychological Lab and Counseling Center among the service recipients based on their gender, age range, and field of studies. A total sample of 150 participants were service recipients; college students, lecturers, staff during the first semester academic year 2014 until the first semester academic year 2015. The instruments used included: the Questionnaire on needs assessment of the development of Psychological Lab and Counseling Center, and a focus group discussion. Frequency distribution, percentage, means, standard deviation, and variance were used to analyze the data. The needs assessment results showed as follows: 1 Overall the realistic basis of Psychological Lab and Counseling Center service was in an “above level of needs” while “the highest level of needs” was found in the desirable qualification. After having divided into categories, the result yielded an “above level” on the realistic basis of the counselor characteristics, task planning, and facility arrangement. For the desired qualification, the results showed that the needs on the counselors’ characteristics, task planning, and facility arrangement were identified as at a highest level of needs. 2 No differences were found on the realistic basis needs of the clients, the services provided, gender, and age range of the clients although they responded differently to the questionnaire. The clients who responded to the questionnaire from different field of studies showed the different needs of services provided in the realistic basis significantly at the level of .05 in which the General Sciences

  20. Multilateral controls of nuclear fuel-cycle in Asia

    International Nuclear Information System (INIS)

    Choi, Jor-Shan

    2010-01-01

    To meet increasing energy demand and climate change issues, nuclear energy is expected to expand during the next decades in both developed and developing countries. This expansion, most visibly in Asian countries would no doubt be accompanied with complex and intractable challenges to global peace and security, notably in the back-end of the nuclear fuel cycle. What to do with the growing stocks of spent fuel in existing nuclear programs? And how to reduce proliferation concerns when spent fuels are generated in less stable regions of the world? The answers to these questions may lie in the possibility of multilateral (or regional) control of nuclear materials and technologies in the back-end of nuclear fuel cycle. One of the areas of interest is technology, e.g., spent fuel treatment (reprocessing) for long term sustainability and environmental-friendly disposal of radioactive wastes, as an alternative to directly disposing spent fuel in geologic repository. The other is to seek for regional centers for centralized interim spent fuel storage which can eventually turn into disposal facilities. Such centers could help facilitate the possibilities of spent fuel take-back/take-away from countries located in less stable regions for fix-period storage. (author)

  1. Fuel loading and homogeneity analysis of HFIR design fuel plates loaded with uranium silicide fuel

    International Nuclear Information System (INIS)

    Blumenfeld, P.E.

    1995-08-01

    Twelve nuclear reactor fuel plates were analyzed for fuel loading and fuel loading homogeneity by measuring the attenuation of a collimated X-ray beam as it passed through the plates. The plates were identical to those used by the High Flux Isotope Reactor (HFIR) but were loaded with uranium silicide rather than with HFIR's uranium oxide fuel. Systematic deviations from nominal fuel loading were observed as higher loading near the center of the plates and underloading near the radial edges. These deviations were within those allowed by HFIR specifications. The report begins with a brief background on the thermal-hydraulic uncertainty analysis for the Advanced Neutron Source (ANS) Reactor that motivated a statistical description of fuel loading and homogeneity. The body of the report addresses the homogeneity measurement techniques employed, the numerical correction required to account for a difference in fuel types, and the statistical analysis of the resulting data. This statistical analysis pertains to local variation in fuel loading, as well as to ''hot segment'' analysis of narrow axial regions along the plate and ''hot streak'' analysis, the cumulative effect of hot segment loading variation. The data for all twelve plates were compiled and divided into 20 regions for analysis, with each region represented by a mean and a standard deviation to report percent deviation from nominal fuel loading. The central regions of the plates showed mean values of about +3% deviation, while the edge regions showed mean values of about -7% deviation. The data within these regions roughly approximated random samplings from normal distributions, although the chi-square (χ 2 ) test for goodness of fit to normal distributions was not satisfied

  2. Dynamical processes in galaxy centers

    International Nuclear Information System (INIS)

    Combes, Francoise

    2012-01-01

    How does the gas get in nuclear regions to fuel black holes? How efficient is the feedback? The different processes to cause rapid gas inflow (or outflow) in galaxy centers are reviewed. Non axisymmetries can be created or maintained by internal disk instabilities, or galaxy interactions. Simulations and observations tell us that the fueling is a chaotic and intermittent process, with different scenarios and time-scales, according to the various radial scales across a galaxy.

  3. Waste management: products and services

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    A number of products and services related to radioactive waste management are described. These include: a portable cement solidification system for waste immobilization; spent fuel storage racks; storage and transport flasks; an on-site low-level waste storage facility; supercompactors; a mobile waste retrieval and encapsulation plant; underwater crushers; fuel assembly disposal; gaseous waste management; environmental restoration and waste management services; a waste treatment consultancy. (UK)

  4. Improving the service life and performance of CANDU fuel channels

    International Nuclear Information System (INIS)

    Causey, A.R.; Cheadle, B.A.; Coleman, C.E.; Price, E.G.

    1996-02-01

    The development objective for CANDU fuel channels is to produce a design that can operate for 40 years at 90% capacity. Steady progress toward this objective is being made. The factors that determine the life of a CANDU fuel channel are reviewed and the processes necessary to achieve the objectives identified. Performance of future fuel channels will be enhanced by reduced operating costs, increased safety margins to postulated accident conditions, and reduced retubing costs compared with those for current channels. The approaches to these issues are discussed briefly in this report. (author). 14 refs., 1 tab., 8 figs

  5. Radioactive waste management centers: an approach

    International Nuclear Information System (INIS)

    Lotts, A.L.

    1980-01-01

    Radioactive waste management centers would satisfy the need for a cost-effective, sound management system for nuclear wastes by the industry and would provide a well integrated solution which could be understood by the public. The future demands for nuclear waste processing and disposal by industry and institutions outside the United States Government are such that a number of such facilities are required between now and the year 2000. Waste management centers can be organized around two general needs in the commercial sector: (1) the need for management of low-level waste generated by nuclear power plants, the once-through nuclear fuel cycle production facilities, from hospitals, and other institutions; and (2) more comprehensive centers handling all categories of nuclear wastes that would be generated by a nuclear fuel recycle industry. The basic technology for radioactive waste management will be available by the time such facilities can be deployed. This paper discusses the technical, economic, and social aspects of organizing radioactive waste managment centers and presents a strategy for stimulating their development

  6. A Central Composite Face-Centered Design for Parameters Estimation of PEM Fuel Cell Electrochemical Model

    Directory of Open Access Journals (Sweden)

    Khaled MAMMAR

    2013-11-01

    Full Text Available In this paper, a new approach based on Experimental of design methodology (DoE is used to estimate the optimal of unknown model parameters proton exchange membrane fuel cell (PEMFC. This proposed approach combines the central composite face-centered (CCF and numerical PEMFC electrochemical. Simulation results obtained using electrochemical model help to predict the cell voltage in terms of inlet partial pressures of hydrogen and oxygen, stack temperature, and operating current. The value of the previous model and (CCF design methodology is used for parametric analysis of electrochemical model. Thus it is possible to evaluate the relative importance of each parameter to the simulation accuracy. However this methodology is able to define the exact values of the parameters from the manufacture data. It was tested for the BCS 500-W stack PEM Generator, a stack rated at 500 W, manufactured by American Company BCS Technologies FC.

  7. Burnable poison option for DUPIC fuel

    International Nuclear Information System (INIS)

    Choi, Hang Bok; Cupta, H. P.

    1996-08-01

    The mechanisms of positive coolant void reactivity of CANDU natural uranium and DUPIC fuel have been studied. The design study of DUPIC fuel was performed using the burnable poison material in the center pin to reduce the coolant void reactivity. The amount of burnable poison was determined such that the prompt inverse period of DUPIC fuel upon full coolant voiding is the same as that of natural uranium fuel at equilibrium burnup. A parametric study on various burnable poisons has shown that natural dysprosium has more merit over other materials because it uniformly controls the void reactivity throughout the burnup with reasonable amount of poison. Additional studies on the option of using scattering or absorber material in the center pin position and the option using variable fuel density were performed. In any case of option using variable fuel density were performed. In any case of options to reduce the void reactivity, it was found that either the discharge burnup and/or the relative linear pin power are sacrificed. A preliminary study was performed for the evaluation of reference DUPIC fuel performance especially represented by Stress Corrosion Cracking(SCC) parameters which is mainly influenced by the refueling operations. For the reference 2-bundle shift refueling scheme, the predicted ramped power and power increment of the reference DUPIC fuel are below the SCC thresholds of CANDU natural uranium fuel. For a 4-bundle shift refueling scheme, the envelopes of element ramped power and power increment upon refueling are 8% and 44% higher than those of a 2-bundle shift refueling scheme on the average, respectively, but still have margins to the failure thresholds of natural uranium fuel. 23 tabs., 25 figs., 20 refs. (Author)

  8. DEBT COLLECTION IMPROVEMENT ACT OF 1996: HHS's Centers for Medicare & Medicaid Services Faces Challenges to Fully Implement Certain Key Provisions

    National Research Council Canada - National Science Library

    2002-01-01

    This report provides additional detail on the Centers for Medicare & Medicaid Services (CMS)2 progress in implementing the debt-referral requirements of DCIA to collect delinquent Medicare debts and includes several recommendations...

  9. LAW, THE LAWS OF NATURE AND ECOSYSTEM ENERGY SERVICES: A CASE OF WILFUL BLINDNESS

    Directory of Open Access Journals (Sweden)

    DR Hodas

    2013-06-01

    Full Text Available Ecosystems services include the collection, concentration, and storage of solar energy as fossil fuels (e.g., coal, petroleum, and natural gas. These concentrated forms of energy were produced by ancient ecosystem services. However, our legal and economic systems fail to recognise the value of the ecosystem service subsidies embedded in fossil fuels. This ecosystem services price subsidy causes overuse and waste of fossil fuels in the free market: fossil fuels are consumed more quickly than they can be replaced by ecosystem services and in far larger quantities than they would be if the price of fossil fuels included the cost of solar energy collection, concentration and manufacturing of raw fossil fuels. Moreover, burning fossil fuels produces enormous environmental, human health and welfare costs and damage. Virtually no legal literature on ecosystem services, sustainable development, or sustainable energy, considers fossil fuels in this context. Without understanding stored energy as an ecosystem service, we cannot reasonably expect to manage our fossil fuel energy resources sustainably. International and domestic energy law and policy systems generally ignore this feature of fossil fuel energy, a blind spot that explains why reducing greenhouse gas emissions from fossil fuels is fundamentally a political challenge. This paper will use new understandings emerging from the field of complex systems to critique existing legal decision-making models that do not adequately account for energy ecosystem services in policy design, resource allocation and project approvals. The paper proposes a new "least-social-cost" decision-making legal structure that includes ecosystem energy services.

  10. Clean Energy Solutions Center Services (Vietnamese Translation) (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2014-11-01

    This is the Vietnamese language translation of the Clean Energy Solutions Center (Solutions Center) fact sheet. The Solutions Center helps governments, advisors and analysts create policies and programs that advance the deployment of clean energy technologies. The Solutions Center partners with international organizations to provide online training, expert assistance, and technical resources on clean energy policy.

  11. Supply and demand estimates for the nuclear fuel cycle

    International Nuclear Information System (INIS)

    Haussermann, W.; Hogroian, P.; Krymm, R.; Cameron, J.

    1977-01-01

    Based on the nuclear power growth forecasts described in the papers for Session I.B., estimates of requirements in the nuclear fuel cycle are given, notably concerning: - natural uranium, - enriched uranium, - fuel fabrication services, and - reprocessing services. The influence of realistic scenarios of uranium and plutonium recycling on fuel cycle requirements is discussed. Furthermore, the known plans for uranium and related fuel cycle production capacities are compared with the foreseeable demand. These estimates cover the period between now and the year 2000. However, in order to determine the influence of possible variations in reactor strategies on uranium demand, notably the introduction of breeder reactors, power growth projections and resulting fuel cycle requirements beyond the year 2000 are also briefly considered [fr

  12. Fuel Composition and Performance Analysis of Endothermically Heated Fuels for Pulse Detonation Engines

    Science.gov (United States)

    2009-03-01

    exchanger was constructed on an inner 2 in Inconel 625 schedule 10 pipe and an outer 2 ½ in Inconel 600 schedule 40 pipe 0.91 m (36 in) in length. The...switched to positions two and three for the remainder of the experiments. 46 The detonation tubes are fabricated from inconel and include heat...and four. Fuel Heating System 47 The fuel heating system centers around two pairs of inconel heat exchangers. The first pair was developed in

  13. Web Services Implementations at Land Process and Goddard Earth Sciences Distributed Active Archive Centers

    Science.gov (United States)

    Cole, M.; Bambacus, M.; Lynnes, C.; Sauer, B.; Falke, S.; Yang, W.

    2007-12-01

    NASA's vast array of scientific data within its Distributed Active Archive Centers (DAACs) is especially valuable to both traditional research scientists as well as the emerging market of Earth Science Information Partners. For example, the air quality science and management communities are increasingly using satellite derived observations in their analyses and decision making. The Air Quality Cluster in the Federation of Earth Science Information Partners (ESIP) uses web infrastructures of interoperability, or Service Oriented Architecture (SOA), to extend data exploration, use, and analysis and provides a user environment for DAAC products. In an effort to continually offer these NASA data to the broadest research community audience, and reusing emerging technologies, both NASA's Goddard Earth Science (GES) and Land Process (LP) DAACs have engaged in a web services pilot project. Through these projects both GES and LP have exposed data through the Open Geospatial Consortiums (OGC) Web Services standards. Reusing several different existing applications and implementation techniques, GES and LP successfully exposed a variety data, through distributed systems to be ingested into multiple end-user systems. The results of this project will enable researchers world wide to access some of NASA's GES & LP DAAC data through OGC protocols. This functionality encourages inter-disciplinary research while increasing data use through advanced technologies. This paper will concentrate on the implementation and use of OGC Web Services, specifically Web Map and Web Coverage Services (WMS, WCS) at GES and LP DAACs, and the value of these services within scientific applications, including integration with the DataFed air quality web infrastructure and in the development of data analysis web applications.

  14. Bulk Fuel: Actions Needed to Improve DODs Fuel Consumption Budget Data

    Science.gov (United States)

    2016-09-01

    be reimbursed with more cash than it anticipated. DOD and military service financial management officials prepare budget justification materials...Overseas Contingency Operations OMB Office of Management and Budget OUSD Office of the Under Secretary of Defense This is a work of the U.S...military service budget and financial management offices, and DLA to determine how O&M budget justification materials generally, and fuel

  15. Improving the provision of language services at an academic medical center: ensuring high-quality health communication for limited-English-proficient patients.

    Science.gov (United States)

    Standiford, Connie J; Nolan, Elizabeth; Harris, Michelle; Bernstein, Steven J

    2009-12-01

    To evaluate and improve the provision of language services at an academic medicine center caring for a diverse population including many limited-English-proficient (LEP) patients. The authors performed a prospective observational study between November 2006 and December 2008 evaluating the provision of language services at the University of Michigan Health System. The primary performance measures were (1) screening patients for their preferred language for health care, (2) assessing the proportion of LEP patients receiving language services from a qualified language services provider, and (3) assessing whether there were any disparities in diabetes care for LEP patients compared with English-speaking patients. The proportion of patients screened for preferred language increased from 59% to 96% with targeted inventions, such as training staff to capture preferred language for health care and correcting prior inaccurate primary language data entry. The proportion of LEP outpatients with a qualified language services provider increased from 19% to 83% through the use of staff and contract interpreters, over-the-phone interpreting and bilingual providers. There were no systematic differences in diabetes quality performance measures between LEP and English-proficient patients. Academic medical centers should measure their provision of language services and compare quality and safety data (e.g., performance measures and adverse events) between LEP and English-speaking patients to identify disparities in care. Leadership support and ongoing training are needed to ensure language-specific services are embedded into clinical care to meet the needs of our diverse patient populations.

  16. National Space Science Data Center data archive and distribution service (NDADS) automated retrieval mail system user's guide

    Science.gov (United States)

    Perry, Charleen M.; Vansteenberg, Michael E.

    1992-01-01

    The National Space Science Data Center (NSSDC) has developed an automated data retrieval request service utilizing our Data Archive and Distribution Service (NDADS) computer system. NDADS currently has selected project data written to optical disk platters with the disks residing in a robotic 'jukebox' near-line environment. This allows for rapid and automated access to the data with no staff intervention required. There are also automated help information and user services available that can be accessed. The request system permits an average-size data request to be completed within minutes of the request being sent to NSSDC. A mail message, in the format described in this document, retrieves the data and can send it to a remote site. Also listed in this document are the data currently available.

  17. Design Challenges of an Episode-Based Payment Model in Oncology: The Centers for Medicare & Medicaid Services Oncology Care Model.

    Science.gov (United States)

    Kline, Ronald M; Muldoon, L Daniel; Schumacher, Heidi K; Strawbridge, Larisa M; York, Andrew W; Mortimer, Laura K; Falb, Alison F; Cox, Katherine J; Bazell, Carol; Lukens, Ellen W; Kapp, Mary C; Rajkumar, Rahul; Bassano, Amy; Conway, Patrick H

    2017-07-01

    The Centers for Medicare & Medicaid Services developed the Oncology Care Model as an episode-based payment model to encourage participating practitioners to provide higher-quality, better-coordinated care at a lower cost to the nearly three-quarter million fee-for-service Medicare beneficiaries with cancer who receive chemotherapy each year. Episode payment models can be complex. They combine into a single benchmark price all payments for services during an episode of illness, many of which may be delivered at different times by different providers in different locations. Policy and technical decisions include the definition of the episode, including its initiation, duration, and included services; the identification of beneficiaries included in the model; and beneficiary attribution to practitioners with overall responsibility for managing their care. In addition, the calculation and risk adjustment of benchmark episode prices for the bundle of services must reflect geographic cost variations and diverse patient populations, including varying disease subtypes, medical comorbidities, changes in standards of care over time, the adoption of expensive new drugs (especially in oncology), as well as diverse practice patterns. Other steps include timely monitoring and intervention as needed to avoid shifting the attribution of beneficiaries on the basis of their expected episode expenditures as well as to ensure the provision of necessary medical services and the development of a meaningful link to quality measurement and improvement through the episode-based payment methodology. The complex and diverse nature of oncology business relationships and the specific rules and requirements of Medicare payment systems for different types of providers intensify these issues. The Centers for Medicare & Medicaid Services believes that by sharing its approach to addressing these decisions and challenges, it may facilitate greater understanding of the model within the oncology

  18. WWER fuel: Results of post irradiation examination

    International Nuclear Information System (INIS)

    Markov, D.V.; Smirnov, V.P.; Smirnov, A.V.; Polenok, V.S.; Perepelkin, S.O.; Ivashchenko, A.A.

    2006-01-01

    Experience in the field of fabrication, operation, testing and post-irradiation examinations (PIE) made it possible to settle the following requirements for a new generation of WWER nuclear fuel: - For WWER-1000 FA, the service life is no less than 5 years, 3 alternative fuel cycles (FC): 12 months x 4 FCs, 12 months x 5 FCs and 18 months x 3 FCs; - For WWER-440 FA, fuel cycle is 12 months x 5 FCs and a part of operating assembly is left for the 6. year; - High fuel burnup - up to 70 MWd/kgU; - Dimensional stability of FA and its components; - FA repairability; - Adaptability of fuel cycles; - Maintenance of maneuvering operating conditions at the NPP; - Reliability of control rod operation; - High serviceability level - FE leakage is no worse than 10-5 l/year. In order to provide the fulfillment of the above-given requirements, designers and production engineers have worked out cumulative measures and engineering solutions, which are introduced in development of a new generation fuel. Currently old design FA-M assemblies provided with steel skeleton are being operated in WWER-1000 reactors at Ukrainian and Bulgarian NPPs. As for Russian NPPs, new-type FAs are operated. These are advanced FAs (AFA), FA-A and FA-2 provided with zirconium alloy skeletons. A design of the second generation of WWER-440 operating assemblies was developed with respect to changes in some geometrical parameters, fastening of FEs in the lower grid (splinting was substituted for collet), usage of reinforcing rib under the lower grid, anti-debris filter and hafnium elements of junction unit as well as hafnium content decrease from 0.05 % mass down to 0.01% mass in zirconium materials. They are basic designs of FAs in order to be introduced in a five-year fuel cycle of WWER-440 NPPs in Czech Republic and Slovakia since 2005 and have got prospects for development. The operating experience of dismountable operating assemblies at the Loviisa NPP, vibration-proof operating assemblies at the

  19. Final Environmental Assessment: Addressing An Army and Air Force Exchange Service (AAFES) Lifestyle Center at Eglin Air Force Base, Florida

    Science.gov (United States)

    2008-11-01

    families on USAF and Army installations. The mission of AAFES is to provide quality goods and services at competitively low prices and generate...quality goods and services at competitively low prices and generate earnings to support morale, welfare, and recreation (MWR) programs (AAFES 2008...Court Building 12 3,773 Remain in current location with expansion planned. Car Care Center Building 501 1,250 Remain in current location Starbucks

  20. Design, Implementation and Analysis of Learner-Centered Guided In-Service Programme for Technical Teacher Education

    Directory of Open Access Journals (Sweden)

    Tiia Rüütmann

    2014-03-01

    Full Text Available The design of learner-centered guided in-service program for technical teacher education has been launched at Estonian Centre for Engineering Pedagogy at Tallinn University of Technology. The aim of the program has been facilitating the initial in-service teaching experience, involving mentoring, peer support and cognitive apprenticeship. The emphasis has been on teaching for knowledge application, including the choice of content and processes, motivation, reflection, problem-solving, choice of educational technology, effective teaching methods, teaching models and strategies ཿ concepts, tools and procedures of the field of engineering, organized in ways enabling teachers to formulate real world problems, apply and solve them. The program has been implemented since 2012 and covers IGIP curriculum requirements. In the present article the designed program is described and analyzed.

  1. Development on nuclear fuel cycle business in Japan

    International Nuclear Information System (INIS)

    Usami, Kogo

    2002-01-01

    The Japan Nuclear Fuel Co., Ltd. (JNF) develops five businesses on nuclear fuel cycle such as uranium concentration, storage and administration of high level radioactive wastes, disposition of low level radioactive wastes, used fuel reprocessing, MOX fuel, at Rokkasho-mura in Aomori prefecture. Here were introduced on outline, construction and operation in reprocessing and MOX fuel works, outline, present state and future subjects on technical development of uranium concentration, outline and safety of disposition center on low level radioactive wastes, and storage and administration of high level radioactive wastes. (G.K.)

  2. NASA Glenn Research Center Electrochemistry Branch Battery and Fuel Cell Development Overview

    Science.gov (United States)

    Manzo, Michelle A.

    2011-01-01

    This presentation covers an overview of NASA Glenn s history and heritage in the development of electrochemical systems for aerospace applications. Current developments related to batteries and fuel cells are addressed. Specific areas of focus are Li-ion batteries and Polymer Electrolyte Membrane Fuel cells systems and their development for future Exploration missions.

  3. BioPortal: enhanced functionality via new Web services from the National Center for Biomedical Ontology to access and use ontologies in software applications.

    Science.gov (United States)

    Whetzel, Patricia L; Noy, Natalya F; Shah, Nigam H; Alexander, Paul R; Nyulas, Csongor; Tudorache, Tania; Musen, Mark A

    2011-07-01

    The National Center for Biomedical Ontology (NCBO) is one of the National Centers for Biomedical Computing funded under the NIH Roadmap Initiative. Contributing to the national computing infrastructure, NCBO has developed BioPortal, a web portal that provides access to a library of biomedical ontologies and terminologies (http://bioportal.bioontology.org) via the NCBO Web services. BioPortal enables community participation in the evaluation and evolution of ontology content by providing features to add mappings between terms, to add comments linked to specific ontology terms and to provide ontology reviews. The NCBO Web services (http://www.bioontology.org/wiki/index.php/NCBO_REST_services) enable this functionality and provide a uniform mechanism to access ontologies from a variety of knowledge representation formats, such as Web Ontology Language (OWL) and Open Biological and Biomedical Ontologies (OBO) format. The Web services provide multi-layered access to the ontology content, from getting all terms in an ontology to retrieving metadata about a term. Users can easily incorporate the NCBO Web services into software applications to generate semantically aware applications and to facilitate structured data collection.

  4. Polyvalent fuel treatment facility (TCP): shearing and dissolution of used fuel at La Hague facility

    Energy Technology Data Exchange (ETDEWEB)

    Brueziere, J.; Tribout-Maurizi, A.; Durand, L.; Bertrand, N. [Recycling Business Unit, AREVA, 1 place de la coupole, 92084 Paris La defense Cedex (France)

    2013-07-01

    Although many used nuclear fuel types have already been recycled, recycling plants are generally optimized for Light Water Reactor (LWR) UO{sub x} fuel. Benefits of used fuel recycling are consequently restricted to those fuels, with only limited capacity for the others like LWR MOX, Fast Reactor (FR) MOX or Research and Test Reactor (RTR) fuel. In order to recycle diverse fuel types, an innovative and polyvalent shearing and dissolving cell is planned to be put in operation in about 10 years at AREVA's La Hague recycling plant. This installation, called TCP (French acronym for polyvalent fuel treatment) will benefit from AREVA's industrial feedback, while taking part in the next steps towards a fast reactor fuel cycle development using innovative treatment solutions. Feasibility studies and R/Development trials on dissolution and shearing are currently ongoing. This new installation will allow AREVA to propose new services to its customers, in particular in term of MOX fuel, Research Test Reactors fuel and Fast Reactor fuel treatment. (authors)

  5. The training for nuclear fuel handling at EDF

    International Nuclear Information System (INIS)

    Marion, J.P.

    1999-01-01

    The handling of fuel assemblies in a nuclear power plant presents 3 types of work: the taking delivery of fresh fuel, the refueling and the disposal of spent fuel. These operations are realized by teams made up of 3 handling operators and a supervisor. The refueling is made by 3*8-hour teams. These handling operations are important for the nuclear safety, a mishandling can damage the fuel cladding which is the first containment barrier, so a training center (CETIC) has been created. This center was founded in 1986 by EDF and Framatome, the purpose was to validate maintenance procedures, to test handling equipment and to train the teams which work on site. Various training programmes have been set up and a system of qualification degrees has been organized. The CETIC is fitted up with equipment that are full-sized mockups of real installations. Fuel assemblies don't react in a similar way to the different mechanical and neutronic stresses they undergo while they are in the core, they get deformed and the handling operations become more delicate. The mockup fuel assemblies are quite deformed to train the teams and prepare them to face any real situation. (A.C.)

  6. Maximum thermal loading test of BWR fuel assembly

    International Nuclear Information System (INIS)

    Nakajima, Yoshitaka; Yoshimura, Kunihiro; Nakamura, Satoshi; Ishizuka, Takao.

    1987-01-01

    Various proving tests on the reliability of nuclear power plants have been conducted at the Nuclear Power Engineering Test Center and at the Japan Power Plant Engineering and Inspection Corporation. The tests were initiated at the request of the Ministry of International Trade and Industry (MITI). Toshiba undertook one of the proving tests on the reliability of nuclear fuel assembly; the maximum thermal loading test of BWR fuel assembly from the Nuclear Power Engineering Test Center. These tests are part of the proving tests mentioned above, and their purpose is to confirm the reliability of the thermal hydraulic engineering techniques. Toshiba has been engaged for the past nine years in the design, fabrication and testing of the equipment. For the project, a test model fuel assembly was used to measure the critical power of the BWR fuel assembly and the void and fluidity of the coolant. From the test results, it has been confirmed that the heat is transferred safely from the fuel assembly to the coolant in the BWR nuclear power plant. In addition, the propriety and reliability of the thermal hydraulic engineering techniques for the fuel assembly have been proved. (author)

  7. World nuclear fuel cycle requirements 1991

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-10

    The nuclear fuel cycle consists of mining and milling uranium ore, processing the uranium into a form suitable for generating electricity, burning'' the fuel in nuclear reactors, and managing the resulting spent nuclear fuel. This report presents projections of domestic and foreign requirements for natural uranium and enrichment services as well as projections of discharges of spent nuclear fuel. These fuel cycle requirements are based on the forecasts of future commercial nuclear power capacity and generation published in a recent Energy Information Administration (EIA) report. Also included in this report are projections of the amount of spent fuel discharged at the end of each fuel cycle for each nuclear generating unit in the United States. The International Nuclear Model is used for calculating the projected nuclear fuel cycle requirements. 14 figs., 38 tabs.

  8. World nuclear fuel cycle requirements 1991

    International Nuclear Information System (INIS)

    1991-01-01

    The nuclear fuel cycle consists of mining and milling uranium ore, processing the uranium into a form suitable for generating electricity, ''burning'' the fuel in nuclear reactors, and managing the resulting spent nuclear fuel. This report presents projections of domestic and foreign requirements for natural uranium and enrichment services as well as projections of discharges of spent nuclear fuel. These fuel cycle requirements are based on the forecasts of future commercial nuclear power capacity and generation published in a recent Energy Information Administration (EIA) report. Also included in this report are projections of the amount of spent fuel discharged at the end of each fuel cycle for each nuclear generating unit in the United States. The International Nuclear Model is used for calculating the projected nuclear fuel cycle requirements. 14 figs., 38 tabs

  9. Innovative Practices to Sustain and Renew Service and Patient-centered Outcomes

    Science.gov (United States)

    Noelke, Nancy

    2014-01-01

    Background and Objectives: In integrating HeartMath into our culture at Gundersen Health System, we have a shared focus on delivering workshops and sustaining our HeartMath practices through a variety of innovative approaches. This presentation provides examples of our success in keeping the HeartMath practices alive for our staff. Gundersen is a fully integrated delivery system of 6500 employees. More than 700 medical, dental, and associate employees are distributed throughout 41 clinic locations, a 325-bed tertiary medical center, a Level II Trauma Center, Gundersen Medical Foundation, residency and medical education programs, and a clinical research program. Our service area covers 19 counties in three states, Western Wisconsin, Southeast Minnesota and Northeast Iowa. We are a physician-led organization embracing a strong administrative/medical partnership. Three parts of the 2012–2016 strategic plan apply to this initiative: Innovate to achieve service and patient-centered experience outcomes that are best in class (Outstanding Patient Experience); create a culture that embraces a passion for caring and spirit of improvement (Great Place to Work); and engage our staff to create a safe, injury-free, and healing environment for themselves, our patients, and visitors (Great Place to Work). Rollout Method: Between February 2011 and February 2013, more than 1200 employees completed HeartMath training. This initiative started with two staff members becoming HeartMathcertified trainers in January 2011. To promote leadership support for the program, the department chair MDs received HeartMath education in May 2011. Several units were identified to be the first to receive the training. As positive reviews circulated, requests for trainings were received from other departments. These included requests to customize the HeartMath offerings for leadership summits, manager meetings, new leader on-boarding, and physician and associate staff and to offer HeartMath appetizers

  10. The impact of the fuel chemical composition on volatile organic compounds emitted by an in-service aircraft gas turbine engine

    Science.gov (United States)

    Setyan, A.; Kuo, Y. Y.; Brem, B.; Durdina, L.; Gerecke, A. C.; Heeb, N. V.; Haag, R.; Wang, J.

    2017-12-01

    Aircraft emissions received increased attention recently because of the steady growth of aviation transport in the last decades. Aircraft engines substantially contribute to emissions of particulate matter and gaseous pollutants in the upper and lower troposphere. Among all the pollutants emitted by aircrafts, volatile organic compounds (VOCs) are particularly important because they are mainly emitted at ground level, posing a serious health risk for people living or working near airports. A series of measurements was performed at the aircraft engine testing facility of SR Technics (Zürich airport, Switzerland). Exhausts from an in-service turbofan engine were sampled at the engine exit plane by a multi-point sampling probe. A wide range of instruments was connected to the common sampling line to determine physico-chemical characteristics of non-volatile particulate matter and gaseous pollutants. Conventional Jet A-1 fuel was used as the base fuel, and measurements were performed with the base fuel doped with two different mixtures of aromatic compounds (Solvesso 150 and naphthalene-depleted Solvesso 150) and an alternative fuel (hydro-processed esters and fatty acids [HEFA] jet fuel). During this presentation, we will show results obtained for VOCs. These compounds were sampled with 3 different adsorbing cartridges, and analyzed by thermal desorption gas chromatography/mass spectrometry (TD-GC/MS, for Tenax TA and Carboxen 569) and by ultra-performance liquid chromatography/ mass spectrometry (UPLC/MS, for DNPH). The total VOC concentration was also measured with a flame ionization detector (FID). In addition, fuel samples were also analyzed by GC/MS, and their chemical compositions were compared to the VOCs emitted via engine exhaust. Total VOCs concentrations were highest at ground idle (>200 ppm C at 4-7% thrust), and substantially lower at high thrust (engine were mainly constituted of alkanes, oxygenated compounds, and aromatics. More than 50 % of the

  11. Spacer grid for fuel elements

    International Nuclear Information System (INIS)

    Hensolt, T.; Huenner, M.; Rau, P.; Veca, A.

    1978-01-01

    The spacer grid for fuel elements of a gas-cooled fast breeder reactor (but also for PWRs and BWRs) consists of a lattice field with dodecagonal meshes. These meshes are formed by three each adjacent hexagons grouped arround a central axis. The pairs of legs extending into the dodecagon and being staggered by 120 0 are designed as knubs with inclined abutting surfaces for the fuel rods. By this means there is formed a three-point bearing for centering the fuel rods. The spacer grid mentioned above is rough-worked from a single disc- resp. plate-shaped body (unfinished piece). (DG) [de

  12. Spacer grid for fuel elements

    International Nuclear Information System (INIS)

    Hensolt, T.; Huenner, M.; Rau, P.; Veca, A.

    1980-01-01

    The spacer grid for fuel elements of a gas-cooled fast breeder reactor (but also for PWRs and BWRs) consists of a lattice field with dodecagonal meshes. These meshes are formed by three each adjacent hexagons grouped arround a central axis. The pairs of legs extending into the dodecagon and being staggered by 120 are designed as knubs with inclined abutting surfaces for the fuel rods. By this means there is formed a three-point bearing for centering the fuel rods. The spacer grid mentioned above is rough-worked from a single disc- resp. plate-shaped body (unfinished piece). (orig.)

  13. Examples of remote handling of irradiated fuel assemblies in Germany

    International Nuclear Information System (INIS)

    Peehs, M.; Knecht, K.

    1999-01-01

    Examples for the remote handling of irradiated fuel in Germany are presented in the following areas: - fuel assembling pool service activities; - early encapsulation of spent fuel in the pool of a nuclear power plant (NPP) at the end of the wet storage period. All development in remote fuel assembly handling envisages minimization of the radioactive dose applied to the operating staff. In the service area a further key objective for applying advanced methods is to perform the work faster and at a higher quality standard. The early encapsulation is a new technology to provide the final packaging of spent fuel already in the pool of a NPP to ensure reliable handling for all further back end processes. (author)

  14. Economic evaluation of multilateral nuclear fuel cycle approach

    International Nuclear Information System (INIS)

    Takashima, Ryuta; Kuno, Yusuke; Omoto, Akira; Tanaka, Satoru

    2011-01-01

    Recently previous works have shown that multilateral nuclear fuel cycle approach has benefits not only of non-proliferation but also of cost effectiveness. This is because for most facilities in nuclear fuel cycle, there exist economies of scale, which has a significant impact on the costs of nuclear fuel cycle. Therefore, the evaluation of economic rationality is required as one of the evaluation factors for the multilateral nuclear fuel cycle approach. In this study, we consider some options with respect to multilateral approaches to nuclear fuel cycle in Asian-Pacific region countries that are proposed by the University of Tokyo. In particular, the following factors are embedded into each type: A) no involvement of assurance of services, B) provision of assurance of services including construction of new facility, without transfer of ownership, and C) provision of assurance of service including construction of new joint facilities with ownership transfer of facilities to multilateral nuclear fuel cycle approach. We show the overnight costs taking into account install and operation of nuclear fuel cycle facilities for each option. The economic parameter values such as uranium price, scale factor, and market output expansion influences the total cost for each option. Thus, we show how these parameter values and economic risks affect the total overnight costs for each option. Additionally, the international facilities could increase the risk of transportation for nuclear material compared to national facilities. We discuss the potential effects of this transportation risk on the costs for each option. (author)

  15. 78 FR 30303 - National Contact Center; Submission for OMB Review; National Contact Center Customer Evaluation...

    Science.gov (United States)

    2013-05-22

    ...] National Contact Center; Submission for OMB Review; National Contact Center Customer Evaluation Survey... regarding the National Contact Center customer evaluation surveys. In this request, the previously approved... customer service levels to those of private industry contact centers. A notice was published in the Federal...

  16. [Financing of regional occupational health service centers: structure and financial criteria in years 2000-2001].

    Science.gov (United States)

    Rydlewska-Liszkowska, Izabela

    2003-01-01

    The rational planning and financing of occupational health services at the national level have to be based on an appropriate system of information about individual units and their financial status that could illustrate their financial administration. This is required not only in view of the internal needs of public money management, but also in view of the national health accounts. The major task in this regard is to assess the level and structure of financing to individual units and to check the soundness of criteria used in the process of supplying financial means. The results of such an analysis can be a valuable source of information for planning carried out also by the institutions which provide funds to cover the cost of tasks performed by individual units. The aim of the project implemented by the Nofer Institute of Occupational Medicine was to collect, process and analyze data on the level and structure of financing of provincial occupational medicine centers. In this paper, the objectives, methodology and analytical tools are discussed. The results and structural data on the level and structure of financing of regional occupational health services centers covering a two-year period are presented. At the same time, the criteria for allocating funds were identified, which made it possible to evaluate the situation and to propose new solutions.

  17. Nuclear fuel strategies

    International Nuclear Information System (INIS)

    Rippon, S.

    1989-01-01

    The paper reports on two international meetings on nuclear fuel strategies, one organised by the World Nuclear Fuel Market in Seville (Spain) October 1988, and the other organised by the American and European nuclear societies in Washington (U.S.A.) November 1988. At the Washington meeting a description was given of the uranium supply and demand market, whereas free trade in uranium was considered in Seville. Considerable concern was expressed at both meetings on the effect on the uranium and enrichment services market of very low prices for spot deals being offered by China and the Soviet Union. Excess enrichment capacity, the procurement policies of the USA and other countries, and fuel cycle strategies, were also discussed. (U.K.)

  18. The design of a fuel element for the RA-3 reactor (Ezeiza Atomic Center)

    International Nuclear Information System (INIS)

    Agueda, Horacio C.; Estevez, Esteban; Gerding, Jose R.; Markiewicz, Mario E.

    2003-01-01

    Some features of the mechanical design of the low enrichment fuel element for the RA-3 reactor are described, with emphasis in those aspects of the original design that have been modified considering the experience acquired in the design of other fuel elements. The proposed modification is based fundamentally on the replacement of all welded joints by screwed joints, which facilitates the manufacture of the fuel element, avoiding the distortions produced by the welds used at present and contributing to the fulfillment of the foreseen tolerances. A basic characteristic of this design is a careful manufacture of the fuel element's structural components in order to assure an assembling of the fuel element that fulfills the tolerances intrinsically required. The fuel is designed for the RA-3 reactor and uses U 3 O 8 or U 3 Si 2 as carrying phase of the fissile material with an enrichment of 19.70% of 235 U. The design verification was performed by analytical and numerical methods, and is supported by testing of materials in laboratory, hydrodynamics tests and performance evaluations of the fuel elements in the RA-3 reactor. (author)

  19. Hydrogen fueling stations in Japan hydrogen and fuel cell demonstration project

    International Nuclear Information System (INIS)

    Koseki, K.; Tomuro, J.; Sato, H.; Maruyama, S.

    2004-01-01

    A new national demonstration project of fuel cell vehicles, which is called Japan Hydrogen and Fuel Cell Demonstration Project (JHFC Project), has started in FY2002 on a four-year plan. In this new project, ten hydrogen fueling stations have been constructed in Tokyo and Kanagawa area in FY2002-2003. The ten stations adopt the following different types of fuel and fueling methods: LPG reforming, methanol reforming, naphtha reforming, desulfurized-gasoline reforming, kerosene reforming, natural gas reforming, water electrolysis, liquid hydrogen, by-product hydrogen, and commercially available cylinder hydrogen. Approximately fifty fuel cell passenger cars and a fuel cell bus are running on public roads using these stations. In addition, two hydrogen stations will be constructed in FY2004 in Aichi prefecture where The 2005 World Exposition (EXPO 2005) will be held. The stations will service eight fuel cell buses used as pick-up buses for visitors. We, Engineering Advancement Association of Japan (ENAA), are commissioned to construct and operate a total of twelve stations by Ministry of Economy Trade and Industry (METI). We are executing to demonstrate or identify the energy-saving effect, reduction of the environmental footprint, and issues for facilitating the acceptance of hydrogen stations on the basis of the data obtained from the operation of the stations. (author)

  20. FY 1994 Report on the results of the joint research project for optimum introduction of development of fuel cell technologies for urban energy centers; 1994 nendo toshi energy center nado nenryo denchi gijutsu kaihatsu saiteki donyu chosa seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-05-01

    Described herein are the FY 1994 results of the joint research project for optimum introduction of development of fuel cell technologies for urban energy centers or the like. The necessary economic conditions for introduction of a fuel cell system to be competitive with the conventional system which individually supplies electric power and heat are 250,000 yen/kW as the construction unit cost, 0.10m{sup 2}/kW as the installation area, 5 years as the cell body life, use of an inexpensive fuel gas (2 to 6 yen/Mcal). Moreover, it is an indoor system which shall have the operational characteristics to follow daily demand fluctuations while operating under the optimum conditions in the urban redevelopment area considered. A 5,000kW-class fuel cell plant burning fuel gas (2 yen/Mcal) will need a total floor area of approximately 400,000 m{sup 2} in an energy-intensive office type demand area. These conditions shall be met in order to economically introduce the 5,000kW-class plant. It is also necessary to compare the plant with the competitive cogeneration plants. The specifications for the prototype now under consideration are sufficient for the energy-saving effect, and it is premised that these specifications and characteristics are secured. (NEDO)