WorldWideScience

Sample records for ft-ir ft-raman 1h

  1. Experimental (FT-IR, FT-Raman, UV-Vis, 1H and 13C NMR) and computational (density functional theory) studies on 3-bromophenylboronic acid

    Science.gov (United States)

    Karabacak, M.; Kose, E.; Atac, A.; Sas, E. B.; Asiri, A. M.; Kurt, M.

    2014-11-01

    Structurally, boronic acids are trivalent boron-containing organic compounds that possess one alkyl substituent (i.e., C-Br bond) and two hydroxyl groups to fill the remaining valences on the boron atom. We studied 3-bromophenylboronic acid (3BrPBA); a derivative of boronic acid. This study includes the experimental (FT-IR, FT-Raman, 1H and 13C NMR, UV-Vis) techniques and theoretical (DFT-density functional theory) calculations. The experimental data are recorded, FT-IR (4000-400 cm-1) and FT-Raman spectra (3500-10 cm-1) in the solid phase. 1H and 13C NMR spectra are recorded in DMSO solution. UV-Vis spectrum is recorded in the range of 200-400 nm for each solution (in ethanol and water). The theoretical calculations are computed DFT/B3LYP/6-311++G(d,p) basis set. The optimum geometry is also obtained from inside for possible four conformers using according to position of hydrogen atoms after the scan coordinate of these structures. The fundamental vibrations are assigned on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method and parallel quantum solutions (PQS) program. 1H and 13C NMR chemical shifts are racked on by using the gauge-invariant atomic orbital (GIAO) method. The time-dependent density functional theory (TD-DFT) is used to find HOMO and LUMO energies, excitation energies, oscillator strengths. The density of state of the studied molecule is investigated as total and partial density of state (TDOS and PDOS) and overlap population density of state (OPDOS or COOP) diagrams have been presented. Besides, frontier molecular orbitals (FMOs), molecular electrostatic potential surface (MEPs) and thermodynamic properties are performed. At the end of this work, the results are ensured beneficial for the literature contribution.

  2. Experimental (FT-IR, FT-Raman, 1H NMR) and theoretical study of magnesium, calcium, strontium, and barium picolinates.

    Science.gov (United States)

    Swiderski, G; Kalinowska, M; Wojtulewski, S; Lewandowski, W

    2006-05-01

    The experimental IR, Raman, and 1H NMR spectra of picolinic acid, as well as magnesium, calcium, strontium, and barium picolinates were registered, assigned and studied. Characteristic changes in the spectra of metal picolinates in comparison with the spectrum of ligand were observed, which lead to the conclusion that perturbation of the aromatic system of picolinates increases along with the series Mg-->Ca-->Sr-->Ba. Theoretical structures of beryllium and magnesium picolinates, as well as theoretical IR spectrum of magnesium picolinate were calculated in B3PW91/6-311++G(d, p) level. On the basis of calculated bond lengths in pyridine ring geometric, aromaticity indexes HOMA were calculated. The idea of these indexes is based on the fact that the essential factor in aromatic stabilization is the pi delocalization manifested in: planar geometry, equalization of the bond lengths and angles, and symmetry. The decidedly lower value of HOMA for magnesium picolinate (i.e. 0.545; 0.539) than that for beryllium picolinate (i.e. 0.998; 0.998) indicate higher aromatic properties of Be picolinate than of Mg picolinate. The comparison of theoretical and literature experimental structures of magnesium picolinate was done. The experimental structure contains two water molecules, so the calculations for hydrated magnesium picolinate were carried on, and the influence of coordinated water molecule on the structure of picolinates was discussed. The HOMAs for hydrated experimental and calculated Mg picolinate amount to 0.870; 0.743, and 0.900; 0.890, respectively, whereas for anhydrous structure, it is as described above, i.e. 0.545; 0.539. Thus, the calculations clearly showed that water molecules coordinated to the central atom weakens the effect of metal on the electronic system of ligand.

  3. Spectroscopic characteristic (FT-IR, FT-Raman, UV, 1H and 13C NMR), theoretical calculations and biological activity of alkali metal homovanillates

    Science.gov (United States)

    Samsonowicz, M.; Kowczyk-Sadowy, M.; Piekut, J.; Regulska, E.; Lewandowski, W.

    2016-04-01

    The structural and vibrational properties of lithium, sodium, potassium, rubidium and cesium homovanillates were investigated in this paper. Supplementary molecular spectroscopic methods such as: FT-IR, FT-Raman in the solid phase, UV and NMR were applied. The geometrical parameters and energies were obtained from density functional theory (DFT) B3LYP method with 6-311++G** basis set calculations. The geometry of the molecule was fully optimized, vibrational spectra were calculated and fundamental vibrations were assigned. Geometric and magnetic aromaticity indices, atomic charges, dipole moments, HOMO and LUMO energies were also calculated. The microbial activity of investigated compounds was tested against Bacillus subtilis (BS), Pseudomonas aeruginosa (PA), Escherichia coli (EC), Staphylococcus aureus (SA) and Candida albicans (CA). The relationship between the molecular structure of tested compounds and their antimicrobial activity was studied. The principal component analysis (PCA) was applied in order to attempt to distinguish the biological activities of these compounds according to selected band wavenumbers. Obtained data show that the FT-IR spectra can be a rapid and reliable analytical tool and a good source of information for the quantitative analysis of the relationship between the molecular structure of the compound and its biological activity.

  4. Spectroscopic investigations (FT-IR & FT-Raman) and molecular docking analysis of 6-[1-methyl-4-nitro-1H-imidazol-5-yl) sulfonyl]-7H-purine

    Science.gov (United States)

    Prasath, M.; Govindammal, M.; Sathya, B.

    2017-10-01

    The Azathioprine is used as anticancer agent. Azathioprine is chemically called 6-[1-methyl-4-nitro-1H-imidazol-5-yl) sulfonyl]-7H-purine (6M4N5P). The vibrational analysis of the 6M4N5P compound was carried out by using FT-IR and FT-Raman spectroscopic techniques and compared with aspects. The optimized geometry, frequency and intensity of the vibrational bands of 6M4N5P were obtained from the HF and DFT methods with 6-31G (d,p) basis set. The harmonic vibrational frequencies were calculated and the scaled values have been compared with experimental FT-IR and FT-Raman spectra. The calculated Highest Occupied Molecular Orbital (HOMO) and Lowest Unoccupied Molecular Orbital (LUMO) energies show that charge transfer occur within the molecule. MEP (Molecular Electrostatic Potential) is very useful in the investigation of the charge distributions and molecular structure. The molecule orbital contributions were determined by using the total density of states (TDOS). A molecular docking analysis has been carried out to understand the conformational change and electrostatic properties of 6M4N5P in the active site of Rac1-Receptor.

  5. Spectroscopic (FT-IR, FT-Raman, UV, 1H and 13C NMR) profiling and computational studies on methyl 5-methoxy-1H-indole-2-carboxylate: A potential precursor to biologically active molecules

    Science.gov (United States)

    Almutairi, Maha S.; Xavier, S.; Sathish, M.; Ghabbour, Hazem A.; Sebastian, S.; Periandy, S.; Al-Wabli, Reem I.; Attia, Mohamed I.

    2017-04-01

    Methyl 5-methoxy-1H-indole-2-carboxylate (MMIC) was prepared via esterification of commercially available 5-methoxyindole-2-carboxylic acid. The title molecule MMIC was characterised using FT-IR and FT-Raman in the ranges of 4000-500 and 4000-50 cm-1, respectively. The fundamental modes of the vibrations were assigned and the UV-visible spectrum of the MMIC molecule was recorded in the range of 200-400 nm to explore its electronic nature. The HOMO-LUMO energy distribution was calculated and the bonding and anti-bonding structures of the title molecule were studied and analysed using the natural bond orbital (NBO) approach. The reactivity of the MMIC molecule was also investigated and both the positive and negative centres of the molecule were identified using chemical descriptors and molecular electrostatic potential (MEP) analysis. The chemical shifts of the 1H and 13C NMR spectra were noted and the magnetic field environment of the MMIC molecule are discussed. The non-linear optical (NLO) properties of the title molecule were studied based on its calculated values of polarisability and hyperpolarisability. All computations were obtained by DFT methods using the 6-311++G (d,p) basis set.

  6. Vibrational (FT-IR and FT-Raman), electronic (UV-Vis), NMR (1H and 13C) spectra and reactivity analyses of 4,5-dimethyl-o-phenylenediamine.

    Science.gov (United States)

    Atac, Ahmet; Karaca, Caglar; Gunnaz, Salih; Karabacak, Mehmet

    2014-09-15

    The structure of 4,5-dimethyl-o-phenylenediamine (C8H12N2, DMPDA) was investigated on the basis of spectroscopic data and theoretical calculations. The sterochemical structure was determined by FT-IR, FT-Raman, UV, 1H and 13C NMR spectra. An experimental study and a theoretical analysis were associated by using the B3LYP method with Gaussian09 package program. FT-IR and FT-Raman spectra were recorded in the region of 4000-400 cm(-1) and 4000-10 cm(-1), respectively. The vibrational spectra were calculated by DFT method and the fundamental vibrations were assigned on the basis of the total energy distribution (TED), calculated with scaled quantum mechanics (SQM) method with Parallel Quantum Solutions (PQS) program. The UV absorption spectrum of the compound that dissolved in ethanol solution were recorded in the range of 190-400 nm. Total density of state (TDOS) and partial density of state (PDOS) of the DMPDA in terms of HOMOs and LUMOs were calculated and analyzed. Chemical shifts were reported in ppm relative to tetramethylsilane (TMS) for 1H and 13C NMR spectra. The compound was dissolved in dimethyl sulfoxide (DMSO). Also, 1H and 13C chemical shifts calculated using the gauge independent atomic orbital (GIAO) method. Mullikan atomic charges and other thermo-dynamical parameters were investigated with the help of B3LYP (DFT) method using 6-311++G** basis set. On the basis of the thermodynamic properties of the title compound at different temperatures have been carried out, revealing the correlations between heat capacity (C), entropy (S), enthalpy changes (H) and temperatures. The optimized bond lengths, bond angles, chemical shifts and vibrational wavenumbers showed the best agreement with the experimental results. Copyright © 2014 Elsevier B.V. All rights reserved.

  7. Vibrational (FT-IR, FT-Raman) and UV-Visible spectroscopic studies, HOMO-LUMO, NBO, NLO and MEP analysis of Benzyl (imino (1H-pyrazol-1-yl) methyl) carbamate using DFT calculaions

    Science.gov (United States)

    Shankar Rao, Y. B.; Prasad, M. V. S.; Udaya Sri, N.; Veeraiah, V.

    2016-03-01

    This paper contains a combined experimental and theoretical study of vibrational and electronic properties of Benzyl(imino(1H-pyrazol-1-yl)methyl)carbamate (BPMC) molecule. The FT-IR and FT-Raman spectra of the title molecule in solid phase were recorded in the region 4000-400 cm-1 and 4000-50 cm-1, respectively. The UV absorption spectrum of the studied compound dissolved in ethanol was recorded in the range of 180-400 nm. The molecular geometries calculated using density functional theory (DFT) was compared with available experimental data. The vibrational spectra calculated at the B3LYP/6-31G(d,p) level were compared with the experimental spectra and assignment to each vibrational frequency was assigned on the basis of potential energy distribution (PED). The calculated electronic and nonlinear optical properties of the title molecule were reported. Furthermore, the thermodynamic properties of the molecule were discussed.

  8. Spectroscopic (FT-IR, FT-Raman, 1H, 13C NMR, UV/VIS), thermogravimetric and antimicrobial studies of Ca(II), Mn(II), Cu(II), Zn(II) and Cd(II) complexes of ferulic acid

    Science.gov (United States)

    Kalinowska, M.; Piekut, J.; Bruss, A.; Follet, C.; Sienkiewicz-Gromiuk, J.; Świsłocka, R.; Rzączyńska, Z.; Lewandowski, W.

    2014-03-01

    The molecular structure of Mn(II), Cu(II), Zn(II), Cd(II) and Ca(II) ferulates (4-hydroxy-3-methoxycinnamates) was studied. The selected metal ferulates were synthesized. Their composition was established by means of elementary and thermogravimetric analysis. The following spectroscopic methods were used: infrared (FT-IR), Raman (FT-Raman), nuclear magnetic resonance (13C, 1H NMR) and ultraviolet-visible (UV/VIS). On the basis of obtained results the electronic charge distribution in studied metal complexes in comparison with ferulic acid molecule was discussed. The microbiological study of ferulic acid and ferulates toward Escherichia coli, Bacillus subtilis, Candida albicans, Pseudomonas aeruginosa, Staphylococcus aureus and Proteus vulgaris was done.

  9. Spectral (FT-IR, FT-Raman, UV, and fluorescence), DFT, and solid state interaction analyses of (E)-4-(3,4-dimethoxybenzylideneamino)-1,5-dimethyl-2-phenyl-1H-pyrazol-3(2H)-one

    Science.gov (United States)

    Alam, Mohammad Sayed; Lee, Dong-Ung

    2017-01-01

    Here, the authors report a combined experimental and theoretical study on the molecular structure and vibrational spectral analyses of (E)-4-(3,4-dimethoxybenzylideneamino)-1,5-dimethyl-2-phenyl-1H-pyrazol-3(2H)-one (DMBADPP), a pyrazolone-based bioactive molecule. Density functional theory (DFT) calculations were carried out to obtain the ground state optimized geometry of the molecule using the B3LYP method and the 6-311G(d,p) basis set. Calculated results agreed well with X-ray data. The vibrational spectra of DMBADPP were calculated at the same level of theory and theoretical scaled vibrational frequencies and assignments were found to agree well with experimental FT-IR and FT-Raman values. Partial atomic charge and molecular electrostatic potential (MEP) surface map analyses were performed to study reactive sites. Calculated frontier molecular orbitals (FMOs) energies and chemical reactivity parameters indicated that the DMBADPP exhibits high polarizability and low kinetic susceptibility. Excitation energy, wavelength, and oscillator strength were calculated using the Time Dependant-DFT/B3LYP/6-311G(d,p) method and compared with experimental UV-Vis spectra obtained in ethanol. However, UV-Vis and fluorescence spectroscopic experiments showed that DMBADPP has good absorption and fluorescent properties and a large Stokes shift. In addition, the solid state behaviors of molecules in crystals were analyzed quantitatively and qualitatively using 3D Hirshfeld surface analysis and associated 2D fingerprint plots.

  10. Spectroscopic (FT-IR, FT-Raman, 1H- and 13C-NMR, Theoretical and Microbiological Study of trans o-Coumaric Acid and Alkali Metal o-Coumarates

    Directory of Open Access Journals (Sweden)

    Małgorzata Kowczyk-Sadowy

    2015-02-01

    Full Text Available This work is a continuation of research on a correlation between the molecular structure and electronic charge distribution of phenolic compounds and their biological activity. The influence of lithium, sodium, potassium, rubidium and cesium cations on the electronic system of trans o-coumaric (2-hydroxy-cinnamic acid was studied. We investigated the relationship between the molecular structure of the tested compounds and their antimicrobial activity. Complementary molecular spectroscopic techniques such as infrared (FT-IR, Raman (FT-Raman, ultraviolet-visible (UV-VIS and nuclear magnetic resonance (1H- and 13C-NMR were applied. Structures of the molecules were optimized and their structural characteristics were calculated by the density functional theory (DFT using the B3LYP method with 6-311++G** as a basis set. Geometric and magnetic aromaticity indices, atomic charges, dipole moments and energies were also calculated. Theoretical parameters were compared to the experimental characteristics of investigated compounds. Correlations between certain vibrational bands and some metal parameters, such as electronegativity, ionization energy, atomic and ionic radius, were found. The microbial activity of studied compounds was tested against Escherichia coli, Bacillus subtilis, Pseudomonas aeruginosa, Staphylococcus aureus, Proteus vulgaris and Candida albicans.

  11. Quantum mechanical and spectroscopic (FT-IR, FT-Raman,1H,13C NMR, UV-Vis) studies, NBO, NLO, HOMO, LUMO and Fukui function analysis of 5-Methoxy-1H-benzo[d]imidazole-2(3H)-thione by DFT studies

    Science.gov (United States)

    Pandey, Manju; Muthu, S.; Nanje Gowda, N. M.

    2017-02-01

    Theoretical analysis of the molecular structure, spectroscopic (FT-IR, FT-Raman, 1H, 13C NMR, UV-Vis) studies, and thermodynamic characteristics of 5-Methoxy-1H-benzo[d]imidazole-2(3H)-thione (5MBIT) molecule were done by DFT/B3LYP using 6-311++G(d, p) basis set. Theoretical parameters were compared with experimental data. The dipole moment (μ), polarizability (Δα) and first order hyperpolarizability (β) of the molecule were calculated. Thermodynamic properties, HOMO and LUMO energies were determined. Global reactivity parameters and Fukui function of the 5MBIT molecule were predicted.

  12. Detection of metanil yellow contamination in turmeric using FT-Raman and FT-IR spectroscopy

    Science.gov (United States)

    Dhakal, Sagar; Chao, Kuanglin; Qin, Jianwei; Kim, Moon; Schmidt, Walter; Chan, Dian

    2016-05-01

    Turmeric is well known for its medicinal value and is often used in Asian cuisine. Economically motivated contamination of turmeric by chemicals such as metanil yellow has been repeatedly reported. Although traditional technologies can detect such contaminants in food, high operational costs and operational complexities have limited their use to the laboratory. This study used Fourier Transform Raman Spectroscopy (FT-Raman) and Fourier Transform - Infrared Spectroscopy (FT-IR) to identify metanil yellow contamination in turmeric powder. Mixtures of metanil yellow in turmeric were prepared at concentrations of 30%, 25%, 20%, 15%, 10%, 5%, 1% and 0.01% (w/w). The FT-Raman and FT-IR spectral signal of pure turmeric powder, pure metanil yellow powder and the 8 sample mixtures were obtained and analyzed independently to identify metanil yellow contamination in turmeric. The results show that FT-Raman spectroscopy and FT-IR spectroscopy can detect metanil yellow mixed with turmeric at concentrations as low as 1% and 5%, respectively, and may be useful for non-destructive detection of adulterated turmeric powder.

  13. Quantum mechanical study of the structure and spectroscopic (FT-IR, FT-Raman, 13C, 1H and UV), NBO and HOMO-LUMO analysis of 2-quinoxaline carboxylic acid

    Science.gov (United States)

    Prabavathi, N.; Nilufer, A.; Krishnakumar, V.

    The FTIR and FT-Raman spectra of 2-quinoxaline carboxylic acid (2-QCA) has been recorded in the region 4000-450 and 4000-100 cm-1, respectively. The conformational analysis, optimized geometry, frequency and intensity of the vibrational bands of 2-QCA were obtained by the density functional theory (DFT) with complete relaxation in the potential energy surface using 6-31G(d) basis set. The harmonic vibrational frequencies were calculated and the scaled values have been compared with experimental FTIR and FT-Raman spectra. The observed and the calculated frequencies are found to be in good agreement. The 1H and13C NMR spectra have been recorded and 1H and 13C nuclear magnetic resonance chemical shifts of the molecule were also calculated using the gauge independent atomic orbital (GIAO) method and their respective linear correlations were obtained. The theoretical UV-visible spectrum of the compound using CIS method and the electronic properties, such as HOMO and LUMO energies, were performed by time-dependent DFT (TD-DFT) approach. The calculated HOMO and LUMO energies show that charge transfer occurs within molecule. The Mulliken charges, the values of electric dipole moment (μ) of the molecule were computed using DFT calculations. The change in electron density (ED) in the σ* antibonding orbitals and stabilization energies E(2) have been calculated by natural bond (NBO) analysis to give clear evidence of stabilization originating in the hyper conjugation of hydrogen-bonded interactions.

  14. Spectroscopic (FT-IR, FT-Raman, UV, 1H and 13C NMR) profiling and theoretical calculations of (2E)-2-[3-(1H-imidazol-1-yl)-1-phenylpropylidene]hydrazinecarboxamide: An anticonvulsant agent

    Science.gov (United States)

    Haress, Nadia G.; Govindarajan, Munusamy; AL-Wabli, Reem I.; Almutairi, Maha S.; Al-Alshaikh, Monirah A.; Al-Saadi, Abdulaziz A.; Attia, Mohamed I.

    2016-08-01

    Vibrational characteristics of the anticonvulsant agent, (2E)-2-[3-(1H-imidazol-1-yl)-1-phenylpropylidene]hydrazinecarboxamide ((2E)-IPHC) have been investigated. The computational data are obtained by adopting ab initio Hartree-Fock (HF) and DFT/B3LYP/6-31 + G(d,p) methods. The most stable conformer is identified by a potential energy scan. The optimized geometrical parameters indicated that the overall symmetry of the most stable conformer is CS. Atoms in molecules (AIM) analysis is contained out and the chemical bondings between the atoms are as characterized. Mulliken atomic charges and simulated thermo-molecular (heat capacity and enthalpy) characteristics of the (2E)-IPHC molecule also have been analyzed. The magnitude of the molecular electrostatic potential (MEP) of oxygen, hydrogen, and nitrogen atoms as well as phenyl and imidazole rings in the title molecule were investigated along with their contribution to the biological activity. The energy gap between HOMO and LUMO orbitals has been found to be 5.1334 eV in the gaseous phase. Excitation energies, oscillator strength and wavelengths were computed by the time-dependent density function theory (TD-DFT) approach. Predicted wavenumbers have been assigned and they are consistent with the experimental values. The 1H and 13C nuclear magnetic resonance (NMR) chemical shifts of the (2E)-IPHC molecule were computed by the gauge independent atomic orbital (GIAO) method and were compared with the experimental results.

  15. Molecular structure, vibrational spectral assignments (FT-IR and FT-RAMAN), NMR, NBO, HOMO-LUMO and NLO properties of O-methoxybenzaldehyde based on DFT calculations

    Science.gov (United States)

    Vennila, P.; Govindaraju, M.; Venkatesh, G.; Kamal, C.

    2016-05-01

    Fourier transform - Infra red (FT-IR) and Fourier transform - Raman (FT-Raman) spectroscopic techniques have been carried out to analyze O-methoxy benzaldehyde (OMB) molecule. The fundamental vibrational frequencies and intensity of vibrational bands were evaluated using density functional theory (DFT). The vibrational analysis of stable isomer of OMB has been carried out by FT-IR and FT-Raman in combination with theoretical method simultaneously. The first-order hyperpolarizability and the anisotropy polarizability invariant were computed by DFT method. The atomic charges, hardness, softness, ionization potential, electronegativity, HOMO-LUMO energies, and electrophilicity index have been calculated. The 13C and 1H Nuclear magnetic resonance (NMR) have also been obtained by GIAO method. Molecular electronic potential (MEP) has been calculated by the DFT calculation method. Electronic excitation energies, oscillator strength and excited states characteristics were computed by the closed-shell singlet calculation method.

  16. Evaluation of Turmeric Powder Adulterated with Metanil Yellow Using FT-Raman and FT-IR Spectroscopy

    Directory of Open Access Journals (Sweden)

    Sagar Dhakal

    2016-05-01

    Full Text Available Turmeric powder (Curcuma longa L. is valued both for its medicinal properties and for its popular culinary use, such as being a component in curry powder. Due to its high demand in international trade, turmeric powder has been subject to economically driven, hazardous chemical adulteration. This study utilized Fourier Transform-Raman (FT-Raman and Fourier Transform-Infra Red (FT-IR spectroscopy as separate but complementary methods for detecting metanil yellow adulteration of turmeric powder. Sample mixtures of turmeric powder and metanil yellow were prepared at concentrations of 30%, 25%, 20%, 15%, 10%, 5%, 1%, and 0.01% (w/w. FT-Raman and FT-IR spectra were acquired for these mixture samples as well as for pure samples of turmeric powder and metanil yellow. Spectral analysis showed that the FT-IR method in this study could detect the metanil yellow at the 5% concentration, while the FT-Raman method appeared to be more sensitive and could detect the metanil yellow at the 1% concentration. Relationships between metanil yellow spectral peak intensities and metanil yellow concentration were established using representative peaks at FT-Raman 1406 cm−1 and FT-IR 1140 cm−1 with correlation coefficients of 0.93 and 0.95, respectively.

  17. NIR FT-Raman microspectroscopy of fluid inclusions: Comparisons with VIS Raman and FT-IR microspectroscopies

    Energy Technology Data Exchange (ETDEWEB)

    Pironon, J.; Dubessy, J. (CREGU and GDR CNRS-CREGU, Vandoeuvre-les-Nancy (France)); Sawatzki, J. (BRUKER Analytische Messtechnik Gmbh, Karlsruhe (Germany))

    1991-12-01

    The first Raman spectra of hydrocarbon inclusions using Fourier transform (FT) Raman microspectroscopy were obtained with a 1,064 nm laser excitation in the near-infrared range (NIR FT-Raman). Some inclusions reveal the typical CH vibrational bands of organic compounds, but most of the inclusions that are fluorescent during visible Raman microspectroscopy (514 nm excitation) are still fluorescent in the NIR range. These Raman spectra are presented and compared to the conventional visible (VIS) Raman and FT-IR spectra. For spectra obtained on the same nonfluorescent inclusion, the signal/background ratio is lower in NIR FT-Raman than in VIS Raman. This ratio should be improved by application of more sensitive detectors. The increase of the power density (laser power/impact laser area) could be a future improvement in the limit of thermal background excitation and pyrolysis of the oils trapped in inclusions.

  18. FT-Raman and FT-IR studies of 1:2.5 piroxicam: β-cyclodextrin inclusion compound

    Science.gov (United States)

    Bertoluzza, A.; Rossi, M.; Taddei, P.; Redenti, E.; Zanol, M.; Ventura, P.

    1999-05-01

    The FT-Raman and FT-IR spectra of amorphous 1:2.5 piroxicam (P): β-cyclodextrin (βCD) inclusion compound (PβCD) are presented and discussed in comparison with the spectra of the three main modifications of piroxicam (α,β and monohydrate). In the 1700-1200 cm -1 FT-Raman spectrum of 1:2.5 PβCD inclusion compound the bands of βCD are weak and covered by those stronger of piroxicam, differently from the FT-IR spectrum where the bands of βCD are stronger, so covering a large part of the spectrum. Typical FT-Raman marker bands are assigned for the characterization of the three modifications of piroxicam. The FT-Raman spectrum of 1:2.5 PβCD inclusion compound predominantly shows the bands at about 1465 and 1400 cm -1 of the monohydrate, indicating that piroxicam assumes the zwitterionic structure stabilized by interaction with βCD via electrostatic and hydrogen bonds. The dipolar character of 1:2.5 PβCD inclusion compound improves the solubility and the dissolution rate of piroxicam and thus its rate of absorption.

  19. Synthesis, crystal structure analysis, spectral (NMR, FT-IR, FT-Raman and UV-Vis) investigations, molecular docking studies, antimicrobial studies and quantum chemical calculations of a novel 4-chloro-8-methoxyquinoline-2(1H)-one: An effective antimicrobial agent and an inhibition of DNA gyrase and lanosterol-14α-demethylase enzymes

    Science.gov (United States)

    Murugavel, S.; Sundramoorthy, S.; Lakshmanan, D.; Subashini, R.; Pavan Kumar, P.

    2017-03-01

    The novel title compound 4-chloro-8-methoxyquinoline-2(1H)-one (4CMOQ) has been synthesized by slow evaporation solution growth technique at room temperature. The synthesized 4CMOQ molecule was characterized experimentally by FT-IR, FT-Raman, UV-Vis, NMR and single crystal diffraction (XRD) and theoretically by quantum chemical calculations. The molecular geometry was also optimized using density functional theory (DFT/B3LYP) method with the 6-311++G (d,p) basis set in ground state and compared with the experimental data. The entire vibrational assignments of wave numbers were made on the basis of potential energy distribution (PED) by VEDA 4 programme. The nuclear magnetic resonance spectra (1H and 13C NMR) are obtained by using the gauge-invariant atomic orbital (GIAO) method. The change in electron density (ED) in the antibonding orbital's and stabilization energies E(2) of the molecule have been evaluated by natural bond orbital (NBO) analysis to give clear evidence of stabilization. Moreover, electronic characteristics such as HOMO and LUMO energies, Mulliken atomic charges and molecular electrostatic potential surface are investigated. Absorption spectrum analysis, nonlinear optical properties, chemical reactivity descriptors and thermodynamic features are also outlined theoretically. Molecular docking studies were executed to understand the inhibitory activity of 4CMOQ against DNA gyrase and Lanosterol 14 α-demethylase. The antimicrobial activity of 4CMOQ was determined against bacterial strains such as Escherichia coli, Staphylococcus aureus and Pseudomonas aeruginosa and fungal strains such as Aspergillus niger, Monascus purpureus and Penicillium citrinum. The obtained results show that the compound exhibited good to moderate antimicrobial activity.

  20. DFT calculations and experimental FT-IR, FT-Raman, NMR, UV-Vis spectral studies of 3-fluorophenylboronic acid.

    Science.gov (United States)

    Karabacak, M; Kose, E; Sas, E B; Kurt, M; Asiri, A M; Atac, A

    2015-02-05

    The spectroscopic (FT-IR, FT-Raman, (1)H and (13)C NMR, UV-Vis), structural, electronic and thermodynamical properties of 3-fluorophenylboronic acid (C6H4FB(OH)2), 3FPBA) were submitted by using both experimental techniques and theoretical methods (quantum chemical calculations) in this work. The experimental infrared and Raman spectra were obtained in the region 4000-400 cm(-1) and 3500-10 cm(-1), respectively. The equilibrium geometry and vibrational spectra were calculated by using DFT (B3LYP) with 6-311++G(d,p) basis set. The vibrational wavenumbers were also corrected with scale factor to take better results for the calculated data. The total energy distributions (TED) of the vibrational modes were performed for the assignments of the title molecule by using scaled quantum mechanics (SQM) method. The NMR chemical shifts ((1)H and (13)C) were recorded in DMSO solution. The (1)H and (13)C NMR spectra were computed by using the gauge-invariant atomic orbital (GIAO) method, showing a good agreement with the experimental ones. The last one UV-Vis absorption spectra were analyzed in two solvents (ethanol and water), saved in the range of 200-400 nm. In addition these, HOMO and LUMO energies, the excitation energies, density of states (DOS) diagrams, thermodynamical properties and molecular electrostatic potential surface (MEPs) were presented. Nonlinear optical (NLO) properties and thermodynamic features were performed. The experimental results are combined with the theoretical calculations using DFT calculations to fortification of the paper. At the end of this work, the results were proved our paper had been indispensable for the literature backing.

  1. Molecular structure, spectral investigation (1H NMR, 13C NMR, UV-Visible, FT-IR, FT-Raman), NBO, intramolecular hydrogen bonding, chemical reactivity and first hyperpolarizability analysis of formononetin [7-hydroxy-3(4-methoxyphenyl)chromone]: A quantum chemical study

    Science.gov (United States)

    Srivastava, Anubha; Mishra, Rashmi; Kumar, Sudhir; Dev, Kapil; Tandon, Poonam; Maurya, Rakesh

    2015-03-01

    Formononetin [7-hydroxy-3(4-methoxyphenyl)chromone or 4‧-methoxy daidzein] is a soy isoflavonoid that is found abundantly in traditional Chinese medicine Astragalus mongholicus (Bunge) and Trifolium pretense L. (red clover), and in an Indian medicinal plant, Butea (B.) monosperma. Crude extract of B.monosperma is used for rapid healing of fracture in Indian traditional medicine. In this study, a combined theoretical and experimental approach is used to study the properties of formononetin. The optimized geometry was calculated by B3LYP method using 6-311++G(d,p) as a large basis set. The FT-Raman and FT-IR spectra were recorded in the solid phase, and interpreted in terms of potential energy distribution (PED) analysis. Density functional theory (DFT) is applied to explore the nonlinear optical properties of the molecule. Good consistency is found between the calculated results and observed data for the electronic absorption, IR and Raman spectra. The solvent effects have been calculated using time-dependent density functional theory in combination with the integral equation formalism polarized continuum model, and the results are in good agreement with observed measurements. The double well potential energy curve of the molecule about the respective bonds, have been plotted, as obtained from DFT/6-31G basis set. The computational results diagnose the most stable conformer of formononetin. The HOMO-LUMO energy gap of possible conformers has been calculated for comparing their chemical activity. Chemical reactivity has been measured by reactivity descriptors and molecular electrostatic potential surface (MEP). The 1H and 13C NMR chemical shifts of the molecule were calculated by the Gauge including atomic orbital (GIAO) method. Furthermore, the role of CHsbnd O intramolecular hydrogen bond in the stability of molecule is investigated on the basis of the results of topological properties of AIM theory and NBO analysis. The calculated first hyperpolarizability shows

  2. FT-IR, FT-Raman spectroscopic study of carotenoids from saffron ( Crocus sativus L.) and some derivatives

    Science.gov (United States)

    Tarantilis, Petros A.; Beljebbar, Abdelilah; Manfait, Michel; Polissiou, Moschos

    1998-04-01

    The carotenoids of saffron, crocins (CRCs), were extracted and their derivatives, dimethylcrocetin (DMCRT) and crocetin (CRT) were prepared from the extract by alkaline hydrolysis in methanol (DMCRT) and by alkaline hydrolysis in water followed by acidification (CRT), respectively. FT-IR, FT-Raman spectroscopies were used to study these compounds. The FT-IR spectra of CRCs, DMCRT and CRT have characteristic absorbance bands between 1706 and 1664 cm -1 ( νCO) and in the region between 1243 and 1228 cm -1 ( νC-O). Two main Raman lines were observed near 1540 and 1166 cm -1 which are respectively assigned to ( νCC) and ( νC-C) stretching modes.

  3. Spectroscopic (FT-IR, FT-Raman, UV-Visible) and quantum chemical studies of 4-Chloro-3-iodobenzophenone

    Science.gov (United States)

    Venkata Prasad, K.; Muthu, S.; Santhamma, C.

    2017-01-01

    The vibrational analysis of the substituted Benzophenone molecule 4-Chloro-3-iodobenzophenone (4, 3-ClIBP) is carried out using both FT-IR and FT-Raman spectra and also quantum chemical calculations of the scaled frequencies using the DFT method B3LYP/LanL2DZ basis set. The natural bond orbital analysis of this molecule has been carried out to describe the various intramolecular interactions responsible for the stabilization of the molecule. The HOMO, LUMO energy gap have been computed with the TD-DFT theory and the differences are compared with UV-absorption spectra. The statistical thermodynamic functions are calculated for the range of 100-1000 k. The Fukui functions are evaluated to describe the activity of the sites.

  4. Alkali metal salts of rutin - Synthesis, spectroscopic (FT-IR, FT-Raman, UV-VIS), antioxidant and antimicrobial studies.

    Science.gov (United States)

    Samsonowicz, M; Kamińska, I; Kalinowska, M; Lewandowski, W

    2015-12-05

    In this work several metal salts of rutin with lithium, sodium, potassium, rubidium and cesium were synthesized. Their molecular structures were discussed on the basis of spectroscopic (FT-IR, FT-Raman, UV-VIS) studies. Optimized geometrical structure of rutin was calculated by B3LYP/6-311++G(∗∗) method and sodium salt of rutin were calculated by B3LYP/LanL2DZ method. Metal chelation change the biological properties of ligand therefore the antioxidant (FRAP and DPPH) and antimicrobial activities (toward Escherichia coli, Staphylococcus aureus, Enterococcus faecium, Proteus vulgaris, Pseudomonas aeruginosa, Klebsiella pneumonia, Candida albicans and Saccharomyces cerevisiae) of alkali metal salts were evaluated and compared with the biological properties of rutin.

  5. Spectroscopic (FT-IR, FT-Raman, UV) and microbiological studies of di-substituted benzoates of alkali metals

    Science.gov (United States)

    Kalinowska, M.; Świsłocka, R.; Borawska, M.; Piekut, J.; Lewandowski, W.

    2008-06-01

    The FT-IR, FT-Raman and UV spectra of 3,5-dihydroxybenzoic and 3,5-dichlorobenzoic acids as well as lithium, sodium, potassium, rubidium, caesium 3,5-dihydroxy- and 3,5-dichlorobenzoates were recorded, assigned and compared. The theoretical geometries, Mulliken atomic charges, IR wavenumbers were obtained in B3LYP/6-311++G** level. On the basis of the gathered experimental and theoretical data the effect of metals and substituents on the electronic system of studied compounds were investigated. Moreover, the antimicrobiological activity of studied compounds against two species of bacteria: Bacillus subtilis, Staphylococus aureus and one species of yeast: Candida albicans were studied after 24 and 48 h of incubation. The attempt was made, to find out whether there is any correlation between the first principal component and the degree of growth inhibition exhibited by studied compounds in relation to selected microorganisms.

  6. FT-Raman, FT-IR spectroscopic and DFT studies of hexaphenoxycyclotriphosphazene

    Science.gov (United States)

    Furer, V. L.; Vandyukov, A. E.; Padie, C.; Majoral, J. P.; Caminade, A. M.; Kovalenko, V. I.

    2016-07-01

    The FTIR and FT Raman measurements of zero Gc0‧ -H and first Gc1‧ -H generations of phosphorus dendrimer built from cyclotriphosphazene core with phenoxy and deuterophenoxy terminal groups have been performed. In order to evaluate how much the frequencies, shift when changing the electronics of the system the FTIR and FT Raman spectra of phosphorus‒containing dendron with five terminal oxybenzaldehyde and one ester function Gci‧ have been also studied. Structural optimization and normal mode analysis were obtained for Gc0‧ -H and Gc0‧ -D by the density functional theory (DFT). It is discovered that dendrimer molecule exists in a stable conformation with six phenoxy terminal groups spaced above and below the flat cyclotriphosphazene core. Optimized geometric bond length and angles obtained by DFT show good agreement with a previously-published X-ray study. The phenoxy terminal groups are characterized by the well-defined line at 993 cm-1 in the experimental Raman spectrum of Gc0‧ -H and by line at 960 cm-1 in the Raman spectrum of Gc0‧ -D. Relying on DFT calculations a complete vibrational assignment is proposed for the studied dendrimers. The frequencies and relative intensity of the bands at 1589, 1487 cm-1 in the IR spectra show marked difference in dependence of the substituents on the aromatic ring.

  7. Molecular structure, spectroscopic characterization (FT-IR, FT-Raman, UV and NMR), HOMO and LUMO analysis of 3-ethynylthiophene with DFT quantum chemical calculations

    Science.gov (United States)

    Karabacak, Mehmet; Bilgili, Sibel; Mavis, Tugba; Eskici, Mustafa; Atac, Ahmet

    2013-11-01

    In this work, FT-IR, FT-Raman, UV and NMR spectra of 3-ethynylthiophene (3-ETP, C6H4S) were carried out by using density functional theory DFT/B3LYP method with the 6-311++G(d,p), 6-311+G(d,p), 6-311G(d,p), 6-31++G(d,p), 6-31+G(d,p), 6-31G(d,p) basis sets. FT-IR and FT-Raman spectra were recorded in the regions of 3500-400 cm-1 and 3500-50 cm-1, respectively. The geometrical parameters, energies and wavenumbers were obtained and the complete assignments of fundamental vibrations were performed on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method and PQS program. The 1H, 13C and HMQC (1H-13C correlation) NMR spectra in chloroform (CDCl3) were recorded and calculated. The UV spectrum of investigated compound were recorded in the region of 200-400 nm in ethanol solution. The electronic properties, such as excitation energies, absorption wavelengths, HOMO and LUMO energies were performed by DFT/B3LYP approach and the results were compared with experimental observations. The thermodynamic properties such zero-point vibrational energy, thermal energy, specific heat capacity, rotational constants, entropy, and dipole moment of the studied compound were calculated. As a result, the calculated results were compared with the observed data and found to be in good agreement.

  8. The spectroscopic properties of anticancer drug Apigenin investigated by using DFT calculations, FT-IR, FT-Raman and NMR analysis

    Science.gov (United States)

    Mariappan, G.; Sundaraganesan, N.; Manoharan, S.

    2012-09-01

    The FT-Raman and FT-Infrared spectra of solid Apigenin sample were measured in order to elucidate the spectroscopic properties of title molecule in the spectral range of 3500-50 cm-1 and 4000-400 cm-1, respectively. The recorded FT-IR and FT-Raman spectral measurements favor the calculated (by B3LYP/6-31G(d,p) method) structural parameters which are further supported by spectral simulation. Additional support is given by the collected 1H and 13C NMR spectra recorded with the sample dissolved in DMSO. The predicted chemical shifts at the B3LYP/6-31G(d) level obtained using the Gauge-Invariant Atomic Orbitals (GIAO) method with and without inclusion of solvent using the Polarizable Continuum Model (PCM). By using TD-DFT method, electronic absorption spectra of the title compound have been predicted and a good agreement with the TD-DFT method and the experimental one is determined. The UV-visible absorption spectra of the compound that dissolved in Ethanol, Methanol and DMSO were recorded in the range of 800-200 nm. The formation of hydrogen bond and the most possible interaction are explained using natural bond orbital (NBO) analysis. In addition, the molecular electrostatic potential (MEP), frontier molecular orbitals (FMO) analysis and atomic charges of the title compound were investigated using theoretical calculations. The results are discussed herein and compared with similar molecules whenever appropriate.

  9. FT-IR, FT-Raman, SERS and computational study of 5-ethylsulphonyl-2-(o-chlorobenzyl)benzoxazole.

    Science.gov (United States)

    Mary, Y Sheena; Raju, K; Yildiz, Ilkay; Temiz-Arpaci, Ozlem; Nogueira, Helena I S; Granadeiro, Carlos M; Van Alsenoy, Christian

    2012-10-01

    FT-IR, FT-Raman and surface-enhanced Raman scattering spectra of 5-ethylsulphonyl-2-(o-chlorobenzyl)benzoxazole were recorded and analyzed. The vibrational wavenumbers were examined theoretically using the Gaussian09 set of quantum chemistry codes, and the normal modes were assigned by potential energy distribution calculations. The presence of CH(2), SO(2) and CH(3) modes in the SERS spectrum indicates the nearness of the methyl group to the metal surface which affects the orientation and metal molecule interaction. The synthesis, NMR spectra and antibacterial properties are reported. The title compound shows more inhibitory effect against Pseudomonas aeruginosa than ampicillin and found to be more potent against Klebsiella pneumoniae and drug-resistant Bacillus subtilis than the other microorganisms. A computation of the first hyperpolarizability indicates that the compound may be a good candidate as a NLO material. The RMS errors of the observed Raman and IR bands are found to be 30.93, 29.77 for HF and 9.57, 6.75 for DFT methods, respectively.

  10. Theoretical (DFT) and experimental (FT-IR, FT-Raman, FT-NMR) investigations on 7-Acetoxy-4-(bromomethyl)coumarin

    Science.gov (United States)

    Erdogdu, Y.; Saglam, S.; Dereli, Ö.

    2015-09-01

    An analysis of the results of the structural and spectroscopic studies of 7-Acetoxy-4-(bromomethyl) coumarin (7A4BMC) molecule were performed by FT-IR, FT-Raman, FT-NMR and quantum chemical calculations. The FT-IR and FT-Raman spectra of 7A4BMC were recorded in the 400-4000 and 50-3500 cm-1 region, respectively. The molecular conformations of 7A4BMC were computed at the B3LYP/6-311++G(d,p) level of theory. Molecular structure and spectral calculations were calculated by means of B3LYP with 6-311++G(d,p), cc-pVDZ and cc-pVTZ basis sets. The whole vibrational characteristics of the 7A4BMC molecule are given.

  11. Spectroscopic (FT-IR, FT-Raman, UV, NMR, NBO) investigation and molecular docking study of (R)-2-Amino-1-PhenylEthanol

    Science.gov (United States)

    Subashini, K.; Periandy, S.

    2016-08-01

    A systematic spectroscopic study of (R)-2-Amino-1-Phenylethanol was carried out using FT-IR, FT-Raman, NMR and UV analysis. FT-IR (4000-400 cm-1) and FT-Raman (4000-100 cm-1) spectrum of the title molecule were recorded in solid phase, the 1H and 13C NMR spectra were recorded in CDCl3 (deuterated chloroform) solution phase and the UV-Vis (200-800 nm) spectrum was recorded in gas phase and ethanol solution phase. Potential energy surface (PES) scan was performed using B3LYP functional with 6-311++G (d, p) basis set. The geometrical parameters (such as bond length, bond angle, dihedral angles) and theoretical frequencies of the title compound were studied from density functional theory (DFT) using B3LYP and B3PW91 functionals with 6-311++G (d, p) basis sets. The computed frequencies were scaled and compared with the experimental values and potential energy distribution (PED) has been tabulated. A comparative study of atomic charges was made by calculating Mulliken, Natural Population Analysis (NPA) and Electrostatic Potential (ESP) simultaneously, with B3LYP/6-311++G (d, p) basis set. 1H and 13C NMR spectra were recorded and chemical shifts were compared to TMS by Gauge-Independent Atomic Orbital (GIAO) method. Electronic properties such as excitation energy, energy gap between HOMO and LUMO was calculated using time dependent DFT technique. NBO analysis, which predicts the different possibilities of electronic transition in the molecule, was computed using B3PW91 functional with 6-311++G (d, p) basis set. The thermodynamic properties such as heat capacity, entropy and enthalpy at different temperatures were computed and analyzed. Molecular docking study shows that the secondary hydroxyl group and the primary amino group in the aliphatic chain attached to the benzene ring are crucial for binding and the title compound might exhibit inhibitory activity against Bacteroides fragilis (3P24) and may act as anti-bacterial agent.

  12. Spectroscopic characterization of enzymatic flax retting: Factor analysis of FT-IR and FT-Raman data

    Science.gov (United States)

    Archibald, D. D.; Henrikssen, G.; Akin, D. E.; Barton, F. E.

    1998-06-01

    Flax retting is a chemical, microbial or enzymatic process which releases the bast fibers from the stem matrix so they can be suitable for mechanical processing before spinning into linen yarn. This study aims to determine the vibrational spectral features and sampling methods which can be used to evaluate the retting process. Flax stems were retted on a small scale using an enzyme mixture known to yield good retted flax. Processed stems were harvested at various time points in the process and the retting was evaluated by conventional methods including weight loss, color difference and Fried's test, a visual ranking of how the stems disintegrate in hot water. Spectroscopic measurements were performed on either whole stems or powders of the fibers that were mechanically extracted from the stems. Selected regions of spectra were baseline and amplitude corrected using a variant of the multiplicative signal correction method. Principal component regression and partial least-squares regression with full cross-validation were used to determine the spectral features and rate of spectral transformation by regressing the spectra against the retting time in hours. FT-Raman of fiber powders and FT-IR reflectance of whole stems were the simplest and most precise methods for monitoring the retting transformation. Raman tracks the retting by measuring the decrease in aromatic signal and subtle changes in the C-H stretching vibrations. The IR method uses complex spectral features in the fingerprint and carbonyl region, many of which are due to polysaccharide components. Both spectral techniques monitor the retting process with greater precision than the reference method.

  13. Molecular vibrational investigation [FT-IR, FT-Raman, UV-Visible and NMR] on Bis(thiourea) Nickel chloride using HF and DFT calculations.

    Science.gov (United States)

    Anand, S; Sundararajan, R S; Ramachandraraja, C; Ramalingam, S; Durga, R

    2015-03-05

    In the present research work, the FT-IR, FT-Raman spectra of the Bis(thiourea) Nickel chloride (BTNC) were recorded and analyzed. The observed fundamental frequencies in finger print and functional group regions were assigned according to their uniqueness region. The computational calculations were carried out by HF and DFT (B3LYP and B3PW91) methods with 6-31++G(d,p) and 6-311++G(d,p) basis sets and the corresponding results were tabulated. The present organo-metallic compound was made up of covalent and coordination covalent bonds. The modified vibrational pattern of the complex molecule associated with ligand group was analyzed. Furthermore, the (13)C NMR and (1)H NMR spectral data were calculated by using the gauge independent atomic orbital (GIAO) method with B3LYP/6-311++G(d,p) basis set and their spectra were simulated and the chemical shifts linked to TMS were compared. A investigation on the electronic and optical properties; absorption wavelengths, excitation energy, dipole moment and frontier molecular orbital energies were carried out. The kubo gap of the present compound was calculated related to HOMO and LUMO energies which confirm the occurring of charge transformation between the base and ligand. Besides frontier molecular orbitals (FMO), molecular electrostatic potential (MEP) was performed. The NLO properties related to Polarizability and hyperpolarizability based on the finite-field approach were also discussed. Crown Copyright © 2014. Published by Elsevier B.V. All rights reserved.

  14. NMR, FT-IR, FT-Raman, UV spectroscopic, HOMO-LUMO and NBO analysis of cumene by quantum computational methods

    Science.gov (United States)

    Sivaranjani, T.; Xavier, S.; Periandy, S.

    2015-03-01

    This work presents the investigation of cumene using the FT-IR, FT-Raman, NMR and UV spectra obtained through various spectroscopic techniques. The theoretical vibrational frequencies and optimized geometric parameters have been calculated by using HF and density functional theory with the hybrid methods B3LYP, B3PW91 and 6-311+G(d,p)/6-311++G(d,p) basis sets. The theoretical vibrational frequencies have been scaled and compared with the corresponding experimental data. 1H and 13C NMR spectra were recorded and chemical shifts of the molecule were compared to TMS by using the Gauge-Independent Atomic Orbital (GIAO) method. A study on the electronic and optical properties, absorption wavelengths, excitation energy, dipole moment and frontier molecular orbital energies, and potential energy surface (PES) is performed using HF and DFT methods. The thermodynamic properties (heat capacity, entropy and enthalpy) at different temperatures are also calculated. NBO analysis is carried out to picture the charge transfer between the localized bonds and lone pairs. NLO properties related to polarizability and hyperpolarizability are also discussed.

  15. Molecular structure, vibrational analysis (FT-IR, FT-Raman), NMR, UV, NBO and HOMO-LUMO analysis of N,N-Diphenyl Formamide based on DFT calculations.

    Science.gov (United States)

    Mathammal, R; Monisha, N R; Yasaswini, S; Krishnakumar, V

    2015-03-15

    In this work, the vibrational spectral analysis is carried out by using Raman and infrared spectroscopy in the range 4000-400 cm(-1) and 4000-50 cm(-1) respectively for N,N-Diphenyl Formamide (DPF) molecule. The optimized molecular structures, vibrational frequencies and corresponding vibrational assignments, nuclear magnetic resonance (NMR) and ultraviolet-visible (UV-VIS) spectra of the title molecule are evaluated using density functional theory (DFT) with standard B3LYP/6-31G(d,p) basis set. The harmonic vibrational frequencies are calculated and the scaled values have been compared with experimental FT-IR and FT-Raman spectra. The observed and calculated frequencies are found to be in good agreement. The stability of the molecule arising from hyper conjugative interactions and the charge delocalization has been analyzed using natural bond (NBO) analysis. The possible electronic transitions are determined by HOMO-LUMO orbital shapes and their energies. Thermodynamic properties (heat capacity, entropy and enthalpy) and the first hyperpolarizability of the title compound are calculated. The Mulliken charges and electric dipole moment of the molecule are computed using DFT calculations. The (1)H and (13)C nuclear magnetic resonance (NMR) chemical shift of the molecules are calculated by the gauge independent atomic orbital (GIAO) method and compared with experimental results. Copyright © 2014 Elsevier B.V. All rights reserved.

  16. Synthesis, spectroscopic (FT-IR, FT-Raman, NMR, UV-Visible), first order hyperpolarizability, NBO and molecular docking study of (E)-1-(4-bromobenzylidene)semicarbazide

    Science.gov (United States)

    Raja, M.; Muhamed, R. Raj; Muthu, S.; Suresh, M.

    2017-01-01

    The compound (E)-1-(4-bromobenzylidene)semicarbazide(4BSC) was synthesized and characterized by FT-IR, FT-Raman, UV-Visible, 1HNMR and 13CNMR spectra. The optimized molecular geometry(bond length, bond angle), the complete vibrational frequency, the infrared intensities and the Raman scattering activities were calculated by using density functional theory(DFT) B3LYP method with the help of 6-311++G(d,p) basis set. From the recorded UV-Visible spectrum, the electronic properties such as excitation energies, wavelength, band gap and oscillator strength are evaluated by TD-DFT in DMSO solution and gas phase methods using 6-311++G(d,p) basis set. The calculated HOMO - LUMO band gap energies confirm that charge transfer occurs within the molecule. The 1H and 13C nuclear magnetic resonance (NMR) chemical shifts of the molecule are calculated by the gauge-independent atomic orbital (GIAO) method and compared with experimental results. The hyperconjugative interaction energy E(2) and electron densities of donor (i) and acceptor (j) bonds were calculated using NBO analysis. Besides NLO and MEP were also calculated and interpreted. To study the biological activity of the investigation molecule, molecular docking was done to identify the hydrogen bond lengths and binding energy with different antimicrobial protein. Thermodynamic properties of the title compound at different temperatures have been calculated, revealing the correlations the heat capacity (C), entropy (S) and enthalpy changes (H) and temperatures.

  17. Combined experimental and quantum chemical studies on spectroscopic (FT-IR, FT-Raman, UV-Vis, and NMR) and structural characteristics of quinoline-5-carboxaldehyde

    Science.gov (United States)

    Kumru, Mustafa; Altun, Ahmet; Kocademir, Mustafa; Küçük, Vesile; Bardakçı, Tayyibe; Şaşmaz, İbrahim

    2016-12-01

    Comparative experimental and theoretical studies have been performed on the structure and spectral (FT-IR, FT-Raman, UV-Vis and NMR) features of quinoline-5-carboxaldehyde. Quantum chemical calculations have been carried out at Hartree-Fock and density functional B3LYP levels with the triple-zeta 6-311++G** basis set. Two stable conformers of quinoline-5-carboxaldehyde arising from the orientation of the carboxaldehyde moiety have been located at the room temperature. The energetic separation of these conformers is as small as 2.5 kcal/mol with a low transition barrier (around 9 kcal/mol). Therefore, these conformers are expected to coexist at the room temperature. Several molecular characteristics of quinoline-5-carboxaldehyde obtained through B3LYP and time-dependent B3LYP calculations, such as conformational stability, key geometry parameters, vibrational frequencies, IR and Raman intensities, UV-Vis vertical excitation energies and the corresponding oscillator strengths have been analyzed. The 1H and 13C NMR chemical shifts of quinoline-5-carboxaldehyde were also investigated.

  18. Quantum mechanical, spectroscopic studies (FT-IR, FT-Raman, NMR, UV) and normal coordinates analysis on 3-([2-(diaminomethyleneamino) thiazol-4-yl] methylthio)-N'-sulfamoylpropanimidamide

    Science.gov (United States)

    Muthu, S.; Uma Maheswari, J.; Sundius, Tom

    2013-05-01

    Famotidine (3-([2-(diaminomethyleneamino) thiazol-4-yl] methylthio)-N'-sulfamoylpropanimidamide) is a histamine H2-receptor antagonist that inhibits stomach acid production, and it is commonly used in the treatment of peptic ulcer disease (PUD) and gastroesophageal reflux disease (GERD/GORD). Quantum chemical calculations of the equilibrium geometry of famotidine in the ground state were carried out using density functional theory (DFT/B3LYP) with the 6-311G(d,p) basis set. In addition, harmonic vibrational frequencies, infrared intensities and Raman activities were calculated at the same level of theory. A detailed interpretation of the infrared and Raman spectrum of the drug is also reported. Theoretical simulations of the FT-IR, and FT-Raman spectra of the title compound have been calculated. Good correlations between the experimental 1H and 13C NMR chemical shifts and calculated GIAO shielding tensors were found. The results of the energy and oscillator strength calculations by time-dependent density functional theory (TD-DFT) supplement the experimental findings. Total and partial density of state (TDOS and PDOS) and also overlap population density of state (COOP or OPDOS) diagrams analysis were presented. The dipole moment, linear polarizability and first order hyperpolarizability values were also computed. The linear polarizability and first order hyperpolarizabilities of the studied molecule indicate that the compound is a good candidate for nonlinear optical materials.

  19. Spectroscopic (FT-IR, FT-Raman, UV, NMR, NBO, NLO) investigation and molecular docking study of (R)-2-Methylamino-1-Phenylethanol (Halostachine)

    Science.gov (United States)

    Subashini, K.; Govindarajan, R.; Surendran, R.; Mukund, K.; Periandy, S.

    2016-12-01

    FT-IR (4000-400 cm-1) and FT-Raman (4000-100 cm-1) spectra of (R)-2-Methylamino-1-Phenylethanol have been recorded in solid phase, 1H and 13C NMR in deuterated chloroform (CDCl3) phase and UV spectrum (200-400 nm) in solid phase and in ethanol solution. The different conformers of the compound and their minimum energies were studied by potential energy surface scan, using semi-empirical method PM6. The computed wavenumbers obtained from B3LYP and B3PW91 functionals along with 6-311++G (d, p) basis sets were scaled so as to agree with the experimental values and the scaling factors have been reported. All the fundamental modes have been assigned based on the potential energy distribution (PED) values and the structure of the molecule was analyzed in parameters like bond length, bond angle and dihedral angles through B3LYP and B3PW91 functionals along with 6-311++G(d,p) basis set. The values of dipole moment (μ), polarizability (α) and hyper polarizability (β) of the molecule were calculated using which, the non-linear optical property of the molecule has been discussed. The observed HOMO-LUMO mappings reveals the different charge transfer possibilities within the molecule. Natural Bond Orbital analysis was computed and possible transitions were correlated with the electronic transitions. Mulliken charges, electrostatic potential charges and natural charges are also predicted. The theoretical 1H and 13C NMR chemical shifts were computed using B3LYP functionals using 6-311++G (2d, p) basis sets. The temperature dependence of the thermodynamic properties; heat capacity, entropy and enthalpy for the title compound were also determined by B3LYP functionals with 6-311++G (d, p) basis set. Molecular docking study shows that the title compound might exhibit inhibitory activity against Bacillus anthracis (3V5O).

  20. Spectroscopic [FT-IR and FT-Raman] and theoretical [UV-Visible and NMR] analysis on α-Methylstyrene by DFT calculations.

    Science.gov (United States)

    Karthikeyan, N; Joseph Prince, J; Ramalingam, S; Periandy, S

    2015-05-15

    In the present research work, the FT-IR, FT-Raman and (13)C and (1)H NMR spectra of the α-Methylstyrene were recorded. The observed fundamental frequencies in finger print as well as functional group regions were assigned according to their uniqueness region. The Gaussian computational calculations are carried out by HF and DFT (B3LYP and B3PW91) methods with 6-31++G(d,p) and 6-311++G(d,p) basis sets and the corresponding results were tabulated. The impact of the presence of vinyl group in phenyl structure of the compound is investigated. The modified vibrational pattern of the molecule associated vinyl group was analyzed. Moreover, (13)C NMR and (1)H NMR were calculated by using the gauge independent atomic orbital (GIAO) method with B3LYP methods and the 6-311++G(d,p) basis set and their spectra were simulated and the chemical shifts linked to TMS were compared. A study on the electronic and optical properties; absorption wavelengths, excitation energy, dipole moment and frontier molecular orbital energies were carried out. The kubo gap of the present compound was calculated related to HOMO and LUMO energies which confirm the occurring of charge transformation between the base and ligand. Besides frontier molecular orbitals (FMO), molecular electrostatic potential (MEP) was performed. The NLO properties related to Polarizability and hyperpolarizability based on the finite-field approach were also discussed. Crown Copyright © 2015. Published by Elsevier B.V. All rights reserved.

  1. Spectroscopic (FT-IR, FT-Raman, UV, NMR, NLO) investigation and molecular docking study of 1-(4-Methylbenzyl) piperazine

    Science.gov (United States)

    Subashini, K.; Periandy, S.

    2017-04-01

    The title compound, 1-(4-Methylbenzyl) piperazine, was analyzed by recording FT-IR (4000-400 cm-1) and FT-Raman (4000-100 cm-1) spectra in solid phase, 1H and 13C NMR in CDCl3 (deuterated chloroform) and UV spectrum (200-400 nm) in solid phase and in ethanol solution. The different conformers of the compound and their minimum energies were studied by potential energy surface scan, using semi-empirical method PM6. Density functional theory (DFT) calculation with 6-311++G (d, p) basis set along with B3LYP and B3PW91 functionals have been used to compute ground state molecular geometries and vibrational frequencies. The assignments of the vibrational spectra have carried out with the help of Potential Energy distribution (PED) analysis. Factor group analysis has also been tabulated. Charge distribution, Frontier Molecular Orbitals, UV-Vis spectra, Molecular Electrostatic Potential (MEP) maps, Non-linear optical (NLO) property and thermodynamic properties of the title compound at different temperatures, were determined using B3LYP functional along with 6-311++G (d, p) basis set. The theoretical 1H and 13C NMR chemical shifts were computed using B3LYP functional with 6-311++G (2d, p) basis sets. Natural Bond orbital analysis were computed and possible transitions were correlated with the electronic transitions. The title compound not only exhibits appreciable dipole moment and hyper polarizability (indicating good NLO properties) but also forms a stable complex with Bacillus cereus, (2HUC), with binding affinity -6.7 kcal/mol through molecular docking, suggesting that, it might exhibit inhibitory activity against Bacillus cereus.

  2. FT-IR, FT-Raman, NMR and UV-Vis spectra and DFT calculations of 5-bromo-2-ethoxyphenylboronic acid (monomer and dimer structures).

    Science.gov (United States)

    Sas, E B; Kose, E; Kurt, M; Karabacak, M

    2015-02-25

    In this study, the Fourier Transform Infrared (FT-IR) and Fourier Transform Raman (FT-Raman) spectra of 5-bromo-2-ethoxyphenylboronic acid (5Br2EPBA) are recorded in the solid phase in the region 4000-400 cm(-1) and 3500-10 cm(-1), respectively. The (1)H, (13)C and DEPT nuclear magnetic resonance (NMR) spectra are recorded in DMSO solution. The UV-Vis absorption spectrum of 5Br2EPBA is saved in the range of 200-400 nm in ethanol and water. The following theoretical calculations for monomeric and dimeric structures are supported by experimental results. The molecular geometry and vibrational frequencies in the ground state are calculated by using DFT methods with 6-31G(d,p) and 6-311G(d,p) basis sets. There are four conformers for the present molecule. The computational results diagnose the most stable conformer of 5Br2EPBA as Trans-Cis (TC) form. The complete assignments are performed on the basis of the total energy distribution (TED) of vibrational modes, calculated with scaled quantum mechanics (SQM) method in parallel quantum solutions (PQS) program. The (1)H and (13)C NMR chemical shifts of 5Br2EPBA molecule are calculated by using the Gauge Invariant Atomic Orbital (GIAO) method in DMSO and gas phase for monomer and dimer structures of the most stable conformer. Moreover, electronic properties, such as the HOMO and LUMO energies (by TD-DFT and CIS methods) and molecular electrostatic potential surface (MEPs) are investigated. Stability of the molecule arising from hyper-conjugative interactions, charge delocalization is analyzed using natural bond orbital (NBO) analysis. Nonlinear optical (NLO) properties and thermodynamic features are presented. All calculated results are compared with the experimental data of the title molecule. The correlation of theoretical and experimental results provides a detailed description of the structural and physicochemical properties of the title molecule.

  3. Spectroscopic (FT-IR, FT-Raman, UV, NMR, NLO) investigation, molecular docking and molecular simulation dynamics on 1-Methyl-3-Phenylpiperazine

    Science.gov (United States)

    Subashini, K.; Periandy, S.

    2017-09-01

    The title compound was analyzed, by recording FT-IR (4000-400 cm-1) and FT-Raman (4000-100 cm-1) spectra in solid phase, 1H and 13C NMR in CDCl3 (deuterated chloroform) and UV spectrum (200-400 nm) in solid phase and in ethanol solution. Conformational analysis was done using semi-empirical method PM6. The computed wavenumbers obtained from B3LYP and B3PW91 functionals along with 6-311++G (d, p) basis sets were scaled so as to agree with the experimental values and the scaling factors have been reported. All fundamental modes have been assigned based on the potential energy distribution (PED) values and the structure of the molecule was analyzed in terms of parameters like bond length, bond angle and dihedral angles through B3LYP and B3PW91 functionals along with 6-311++G(d,p) basis set. The observed HOMO-LUMO mappings reveal the different charge transfer possibilities within the molecule. The percentage contribution of a group to each molecular orbital was calculated using Gauss Sum program. Natural bond orbital analysis was computed and possible transition were correlated with the electronic transitions. Mulliken charges, electrostatic potential charges and natural charges are also predicted. The theoretical 1H and 13C NMR chemical shifts were computed using B3LYP functionals using 6-311++G (2d, p) basis sets. The temperature dependence of the thermodynamic properties; heat capacity, entropy and enthalpy for the title compound were also determined by B3LYP functional with 6-311++G (d, p) basis set. Molecular docking study shows that the title compound might exhibit inhibitory activity against Clostridium botulinum (2J3X). The interaction of the ligand (title molecule) with 2J3X for 2 ns duration and radial distribution function have been observed through molecular dynamics simulations.

  4. Spectroscopic [FT-IR and FT-Raman] and molecular modeling (MM) study of benzene sulfonamide molecule using quantum chemical calculations

    Science.gov (United States)

    Vinod, K. S.; Periandy, S.; Govindarajan, M.

    2016-07-01

    The spectroscopic and molecular modeling (MM) study includes, FT-IR, FT-Raman and 13C NMR and 1H NMR spectra of the Benzene sulfonamide were recorded for the analysis. The observed experimental and theoretical frequencies (IR and Raman) were assigned according to their distinctive region. The present study of this title molecule have been carried out by hybrid computational calculations of HF and DFT (B3LYP) methods with 6-311+G(d,p) and 6-311++G(d,p) basis sets and the corresponding results are tabulated. The structural modifications of the compound due to the substitutions of NH2 and SO2 were investigated. The minimum energy conformers of the compound were studied using conformational analysis. The alternations of the vibrational pattern of the base structure related to the substitutions were analyzed. The thermodynamic parameters (such as zero-point vibrational energy, thermal energy, specific heat capacity, rotational constants, entropy, and dipole moment) of Benzene sulfonamide have been calculated. The donor acceptor interactions of the compound and the corresponding UV transitions are found out using NBO analysis. The NMR spectra were simulated by using the gauge independent atomic orbital (GIAO) method with B3LYP methods and the 6-311++G(d,p) basis set and their spectra were simulated and the chemical shifts related to TMS were compared. A quantum computational study on the electronic and optical properties absorption wavelengths, excitation energy, dipole moment and frontier molecular orbital energies, were performed by HF and DFT methods. The energy gap of the present compound was calculated related to HOMO and LUMO energies which confirm the occurring of charge transformation between the base and ligand group. Besides frontier molecular orbitals (FMO), molecular electrostatic potential (MEP) was performed. The thermodynamic properties (heat capacity, entropy, and enthalpy) of the title compound at different temperatures were calculated in gas phase and

  5. FT-IR, FT-Raman, UV-visible, and NMR spectroscopy and vibrational properties of the labdane-type diterpene 13-epi-sclareol.

    Science.gov (United States)

    Chain, Fernando E; Leyton, Patricio; Paipa, Carolina; Fortuna, Mario; Brandán, Silvia A

    2015-03-05

    In this work, FT-IR, FT-Raman, UV-Visible and NMR spectroscopies and density functional theory (DFT) calculations were employed to study the structural and vibrational properties of the labdane-type diterpene 13-epi-sclareol using the hybrid B3LYP method together with the 6-31G(∗) basis set. Three stable structures with minimum energy found on the potential energy curves (PES) were optimized, and the corresponding molecular electrostatic potentials, atomic charges, bond orders, stabilization energies and topological properties were computed at the same approximation level. The complete assignment of the bands observed in the vibrational spectrum of 13-epi-sclareol was performed taking into account the internal symmetry coordinates for the three structures using the scaled quantum mechanical force field (SQMFF) methodology at the same level of theory. In addition, the force constants were calculated and compared with those reported in the literature for similar compounds. The predicted vibrational spectrum and the calculated (1)H NMR and (13)C NMR chemical shifts are in good agreement with the corresponding experimental results. The theoretical UV-Vis spectra for the most stable structure of 13-epi-sclareol demonstrate a better correlation with the corresponding experimental spectrum. The study of the three conformers by means of the theory of atoms in molecules (AIM) revealed different H bond interactions and a strong dependence of the interactions on the distance between the involved atoms. Furthermore, the natural bond orbital (NBO) calculations showed the characteristics of the electronic delocalization for the two six-membered rings with chair conformations.

  6. FT-IR, FT-Raman, UV-Visible, and NMR spectroscopy and vibrational properties of the labdane-type diterpene 13-epi-sclareol

    Science.gov (United States)

    Chain, Fernando E.; Leyton, Patricio; Paipa, Carolina; Fortuna, Mario; Brandán, Silvia A.

    2015-03-01

    In this work, FT-IR, FT-Raman, UV-Visible and NMR spectroscopies and density functional theory (DFT) calculations were employed to study the structural and vibrational properties of the labdane-type diterpene 13-epi-sclareol using the hybrid B3LYP method together with the 6-31G∗ basis set. Three stable structures with minimum energy found on the potential energy curves (PES) were optimized, and the corresponding molecular electrostatic potentials, atomic charges, bond orders, stabilization energies and topological properties were computed at the same approximation level. The complete assignment of the bands observed in the vibrational spectrum of 13-epi-sclareol was performed taking into account the internal symmetry coordinates for the three structures using the scaled quantum mechanical force field (SQMFF) methodology at the same level of theory. In addition, the force constants were calculated and compared with those reported in the literature for similar compounds. The predicted vibrational spectrum and the calculated 1H NMR and 13C NMR chemical shifts are in good agreement with the corresponding experimental results. The theoretical UV-Vis spectra for the most stable structure of 13-epi-sclareol demonstrate a better correlation with the corresponding experimental spectrum. The study of the three conformers by means of the theory of atoms in molecules (AIM) revealed different H bond interactions and a strong dependence of the interactions on the distance between the involved atoms. Furthermore, the natural bond orbital (NBO) calculations showed the characteristics of the electronic delocalization for the two six-membered rings with chair conformations.

  7. Vibrational spectra (FT-IR, FT-Raman), frontier molecular orbital, first hyperpolarizability, NBO analysis and thermodynamics properties of Piroxicam by HF and DFT methods.

    Science.gov (United States)

    Suresh, S; Gunasekaran, S; Srinivasan, S

    2015-03-05

    The solid phase FT-IR and FT-Raman spectra of 4-Hydroxy-2-methyl-N-(2-pyridinyl)-2H-1,2-benzothiazine-3-carboxamide-1,1-dioxide (Piroxicam) have been recorded in the region 4000-400 and 4000-100cm(-1) respectively. The molecular geometry, harmonic vibrational frequencies and bonding features of piroxicam in the ground state have been calculated by Hartree-Fock (HF) and density functional theory (DFT) methods using 6-311++G(d,p) basis set. The calculated harmonic vibrational frequencies are scaled and they are compared with experimental obtained by FT-IR and FT-Raman spectra. A detailed interpretation of the vibrational spectra of the title compound has been made on the basis of the calculated potential energy distribution (PED). The electronic properties, such as HOMO and LUMO energies, molecular electrostatic potential (MESP) are also performed. The linear polarizability (α) and the first order hyper polarizability (β) values of the title compound have been computed. The molecular stability arising from hyper conjugative interaction, charge delocalization has been analyzed using natural bond orbital (NBO) analysis.

  8. Vibrational spectra (FT-IR, FT-Raman), frontier molecular orbital, first hyperpolarizability, NBO analysis and thermodynamics properties of Piroxicam by HF and DFT methods

    Science.gov (United States)

    Suresh, S.; Gunasekaran, S.; Srinivasan, S.

    2015-03-01

    The solid phase FT-IR and FT-Raman spectra of 4-Hydroxy-2-methyl-N-(2-pyridinyl)-2H-1,2-benzothiazine-3-carboxamide-1,1-dioxide (Piroxicam) have been recorded in the region 4000-400 and 4000-100 cm-1 respectively. The molecular geometry, harmonic vibrational frequencies and bonding features of piroxicam in the ground state have been calculated by Hartree-Fock (HF) and density functional theory (DFT) methods using 6-311++G(d,p) basis set. The calculated harmonic vibrational frequencies are scaled and they are compared with experimental obtained by FT-IR and FT-Raman spectra. A detailed interpretation of the vibrational spectra of the title compound has been made on the basis of the calculated potential energy distribution (PED). The electronic properties, such as HOMO and LUMO energies, molecular electrostatic potential (MESP) are also performed. The linear polarizability (α) and the first order hyper polarizability (β) values of the title compound have been computed. The molecular stability arising from hyper conjugative interaction, charge delocalization has been analyzed using natural bond orbital (NBO) analysis.

  9. Spectroscopy (FT-IR, FT-Raman), hydrogen bonding, electrostatic potential and HOMO-LUMO analysis of tioxolone based on DFT calculations

    Science.gov (United States)

    Tao, Yaping; Li, Xiaofeng; Han, Ligang; Zhang, Weiying; Liu, Zhaojun

    2016-10-01

    Tioxolone possess antipsoriatic and antibacterial properties. Therefore, it has been used in treating various skin and scalp disorders for many years. Spectroscopic analysis of tioxolone was presented by using density functional theory (DFT) calculations and experiments (FT-IR, FT-Raman and UV-Vis). Molecular geometry and vibrational wavenumbers of tioxolone were investigated by using B3LYP method with aug-cc-pVTZ basis set. A complete vibrational spectra was made to analyze the potential energy distributions (PED). In addition, analysis of frontier molecular orbitals, electrostatic potential (ESP) and thermodynamic properties (heat capacity, entropy, enthalpy and Gibbs free energy) was presented with the same basis-set. Furthermore, the nature of molecular association through hydrogen bonding were discussed using atoms in molecules (AIM) and reduced density gradient (RDG) methods.

  10. Density functional theory study, FT-IR and FT-Raman spectra and SQM force field calculation for vibrational analysis of 1, 3-Bis (hydroxymethyl) benzimidazolin-2-one.

    Science.gov (United States)

    Joseph, Lynnette; Sajan, D; Chaitanya, K; Devarajegowda, H C; Isac, Jayakumary

    2013-10-01

    FT-IR and FT-Raman spectra of 1, 3-Bis (hydroxymethyl) benzimidazolin-2-one were recorded and analyzed in the solid phase. The optimized molecular geometry and vibrational wavenumbers have also been calculated in optimized structure by using DFT method. Scaled quantum mechanical force fields have also been used to calculate potential energy distributions in order to make conspicuous vibrational assignments. The red shifting of the O-H stretching wavenumber is due to the formation of O-H···O intermolecular hydrogen bonding. The lowering and splitting of the carbonyl stretching vibrational modes is assigned to the intermolecular association based on C=O···H type hydrogen bonding in the molecule. Chemical interpretation of hyperconjugative interactions was done by natural bond orbital analysis.

  11. Vibrational spectroscopic (FT-IR, FT-Raman) studies, Hirshfeld surfaces analysis, and quantum chemical calculations of m-acetotoluidide and m-thioacetotoluidide

    Science.gov (United States)

    Śmiszek-Lindert, Wioleta Edyta; Chełmecka, Elżbieta; Góralczyk, Stefan; Kaczmarek, Marian

    2017-01-01

    Theoretical calculations of the m-acetotoluidide and m-thioacetotoluidide isolated molecules were performed by using density functional theory (DFT) method at B3LYP/6-311++G (d,p) and B3LYP/6-311++G (3df,2pd) basis set levels. The Hirshfeld surfaces analysis and FT-IR and FT-Raman spectroscopy studies have been reported. The geometrical parameters of the title amide and thioamide are in a good agreement with the XRD experiment. The vibrational frequencies were calculated and scaled, and subsequently values have been compared with the experimental Infrared and Raman spectra. The observed and calculated frequencies are found to be in good agreement. The analysis of the Hirshfeld surface has been well correlated to the spectroscopic studies. Additionally, the highest occupied molecular orbital energy (EHOMO), lowest unoccupied molecular orbital energy (ELUMO) and the energy gap between EHOMO and ELUMO (ΔEHOMO-LUMO) have been calculated.

  12. Structural study, NCA, FT-IR, FT-Raman spectral investigations, NBO analysis, thermodynamic functions of N-acetyl-L-phenylalanine

    Science.gov (United States)

    Raja, B.; Balachandran, V.; Revathi, B.

    2015-03-01

    The FT-IR and FT-Raman spectra of N-acetyl-L-phenylalanine were recorded and analyzed. Natural bond orbital analysis has been carried out for various intramolecular interactions that are responsible for the stabilization of the molecule. HOMO-LUMO energy gap has been computed with the help of density functional theory. The statistical thermodynamic functions (heat capacity, entropy, vibrational partition function and Gibbs energy) were obtained for the range of temperature 100-1000 K. The polarizability, first hyperpolarizability, anisotropy polarizability invariant has been computed using quantum chemical calculations. The infrared and Raman spectra were also predicted from the calculated intensities. Comparison of the experimental and theoretical spectra values provides important information about the ability of the computational method to describe the vibrational modes.

  13. Molecular structure and vibrational analysis of Trifluoperazine by FT-IR, FT-Raman and UV-Vis spectroscopies combined with DFT calculations.

    Science.gov (United States)

    Rajesh, P; Gunasekaran, S; Gnanasambandan, T; Seshadri, S

    2015-02-25

    The complete vibrational assignment and analysis of the fundamental vibrational modes of Trifluoperazine (TFZ) was carried out using the experimental FT-IR, FT-Raman and UV-Vis data and quantum chemical studies. The observed vibrational data were compared with the wavenumbers derived theoretically for the optimized geometry of the compound from the DFT-B3LYP gradient calculations employing 6-31G (d,p) basis set. Thermodynamic properties like entropy, heat capacity and enthalpy have been calculated for the molecule. The HOMO-LUMO energy gap has been calculated. The intramolecular contacts have been interpreted using natural bond orbital (NBO) and natural localized molecular orbital (NLMO) analysis. Important non-linear properties such as first hyperpolarizability of TFZ have been computed using B3LYP quantum chemical calculation.

  14. Acid-base properties, FT-IR, FT-Raman spectroscopy and computational study of 1-(pyrid-4-yl)piperazine.

    Science.gov (United States)

    Mary, Y Sheena; Panicker, C Yohannan; Varghese, Hema Tresa; Van Alsenoy, Christian; Procházková, Markéta; Sevčík, Richard; Pazdera, Pavel

    2014-01-01

    We report the vibrational spectral analysis was carried out using FT-IR and FT-Raman spectroscopy for 1-(pyrid-4-yl)piperazine (PyPi). Single crystals of PyPi suitable for X-ray structural analysis were obtained. The acid-base properties are also reported. PyPi supported on a weak acid cation-exchanger in the single protonated form and this system can be used efficiently as the solid supported analogue of 4-N,N-dimethyl-aminopyridine. The complete vibrational assignments of wavenumbers were made on the basis of potential energy distribution. The HOMO and LUMO analysis is used to determine the charge transfer within the molecule and with the molecular electrostatic potential map was applied for the reactivity assessment of PyPi molecule toward proton, electrophiles and nucleopholes as well. The stability of the molecule arising from hyper-conjugative interaction and charge delocalization has been analyzed using NBO analysis. The calculated first hyperpolarizability of PyPi is 17.46 times that of urea.

  15. Curcumin-β-cyclodextrin inclusion complex: stability, solubility, characterisation by FT-IR, FT-Raman, X-ray diffraction and photoacoustic spectroscopy, and food application.

    Science.gov (United States)

    Mangolim, Camila Sampaio; Moriwaki, Cristiane; Nogueira, Ana Claudia; Sato, Francielle; Baesso, Mauro Luciano; Neto, Antônio Medina; Matioli, Graciette

    2014-06-15

    Curcumin was complexed with β-CD using co-precipitation, freeze-drying and solvent evaporation methods. Co-precipitation enabled complex formation, as indicated by the FT-IR and FT-Raman techniques via the shifts in the peaks that were assigned to the aromatic rings of curcumin. In addition, photoacoustic spectroscopy and X-ray diffraction, with the disappearance of the band related to aromatic rings, by Gaussian fitting, and modifications in the spectral lines, respectively, also suggested complex formation. The possible complexation had an efficiency of 74% and increased the solubility of the pure colourant 31-fold. Curcumin-β-CD complex exhibited a sunlight stability 18% higher than the pure colourant. This material was stable to pH variations and storage at -15 and 4°C. With an isothermal heating at 100 and 150°C for 2h, the material exhibited a colour retention of approximately 99%. The application of curcumin-β-CD complex in vanilla ice creams intensified the colour of the products and produced a great sensorial acceptance.

  16. FT-IR, FT-Raman, UV/Vis spectra and fluorescence imaging studies on 2-(bromoacetyl)benzo(b)furan by ab initio DFT calculations.

    Science.gov (United States)

    Veeraiah, A

    2015-08-05

    The vibrational and electronic properties of 2-(bromoacetyl)benzo(b)furan have been studied in the ground state using experimental techniques (FT-IR, FT-Raman and UV) and density functional theory (DFT) employing B3LYP exchange correlation with the 6-31G(d,p) basis set. The theoretically calculated optimized parameters, vibrational frequencies etc., were compared with the experimental values, which yield good agreement between the observed and calculated values. The complete assignments of fundamental modes were performed on the basis of the potential energy distribution (PED). UV-visible spectrum of the compound was recorded in the region 300-600 nm and compared with the theoretical spectrum obtained from SAC-CI calculations. A good agreement is observed between the experimental and theoretical spectra. Fluorescence microscopic imaging studies proved that the compound can be used as one of the potential light sources in the yellow region with suitable excitation. Further, the predicted electronic transitions between the MOs 47→64, 52→62, 56→65, 56→72, 56→77 of the compound show a strong line at 569.8 nm. Copyright © 2015 Elsevier B.V. All rights reserved.

  17. Preparation and characterizations of SnO2 nanopowder and spectroscopic (FT-IR, FT-Raman, UV-Visible and NMR) analysis using HF and DFT calculations.

    Science.gov (United States)

    Ayeshamariam, A; Ramalingam, S; Bououdina, M; Jayachandran, M

    2014-01-24

    In this work, pure and singe phase SnO2 Nano powder is successfully prepared by simple sol-gel combustion route. The photo luminescence and XRD measurements are made and compared the geometrical parameters with calculated values. The FT-IR and FT-Raman spectra are recorded and the fundamental frequencies are assigned. The optimized parameters and the frequencies are calculated using HF and DFT (LSDA, B3LYP and B3PW91) theory in bulk phase of SnO2 and are compared with its Nano phase. The vibrational frequency pattern in nano phase gets realigned and the frequencies are shifted up to higher region of spectra when compared with bulk phase. The NMR and UV-Visible spectra are simulated and analyzed. Transmittance studies showed that the HOMO-LUMO band gap (Kubo gap) is reduced from 3.47 eV to 3.04 eV while it is heated up to 800°C. The Photoluminescence spectra of SnO2 powder showed a peak shift towards lower energy side with the change of Kubo gap from 3.73 eV to 3.229 eV for as-prepared and heated up to 800°C. Crown Copyright © 2013. Published by Elsevier B.V. All rights reserved.

  18. Experimental and theoretical studies of (FT-IR, FT-Raman, UV-Visible and DFT) 4-(6-methoxynaphthalen-2-yl) butan-2-one.

    Science.gov (United States)

    Govindasamy, P; Gunasekaran, S

    2015-01-01

    In this work, the vibrational spectral analysis was carried out by using FT-Raman and FT-IR spectroscopy in the range 4000-50 cm(-1) and 4000-450 cm(-1) respectively for 4-(6-methoxynaphthalen-2-yl) butan-2-one (abbreviated as 4MNBO) molecule. Theoretical calculations were performed by density functional theory (DFT/B3LYP) method using 6-311G(d,p) and 6-311++G(d,p) basis sets. The difference between the observed and calculated wavenumber value of most of the fundamentals were very small. The complete vibrational assignments of wavenumbers were made on the basis of potential energy distribution (PED). The UV-Vis spectrum was recorded in the methanol solution. The energy, wavelength and oscillator's strength were calculated by Time Dependent Density Functional Theory (TD-DFT) and matched to the experimental findings. The intramolecular contacts have been interpreted using natural bond orbital (NBO) and natural localized molecular orbital (NLMO) analysis. Thermodynamic properties of 4MNBO at different temperature have been calculated. The molecular electrostatic potential surface (MESP) and Frontier molecular orbital's (FMO's) analysis were investigated using theoretical calculations. Copyright © 2015 Elsevier B.V. All rights reserved.

  19. Quantum chemical calculation (electronic and topologic) and experimental (FT-IR, FT-Raman and UV) analysis of isonicotinic acid N-oxide

    Science.gov (United States)

    Karaca, Caglar; Atac, Ahmet; Karabacak, Mehmet

    2015-04-01

    In this work, the molecular conformation, vibrational and electronic analysis of isonicotinic acid N-oxide (iso-NANO) were presented in the ground state using experimental techniques (FT-IR, FT-Raman and UV) and density functional theory (DFT) employing B3LYP exchange correlation with the 6-311++G(d,p) basis set. The geometry optimization and energies associated possible two conformers (Rot-I and Rot-II) were computed. The vibrational spectra were calculated and fundamental vibrations were assigned on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method and PQS program. The obtained structures were analyzed with the Atoms in Molecules (AIMs) methodology. The computational results diagnose the most stable conformer of iso-NANO as the Rot-I form. Total density of state (TDOS) and partial density of state (PDOS) and also overlap population density of state (OPDOS) diagrams analysis for the most stable conformer (Rot-I) were calculated using the same method. Thermodynamic properties (heat capacity, entropy and enthalpy) of the title compound at different temperatures were calculated. As a result, the optimized geometry and calculated spectroscopic data show a good agreement with the experimental results.

  20. Acid-base properties, FT-IR, FT-Raman spectroscopy and computational study of 1-(pyrid-4-yl)piperazine

    Science.gov (United States)

    Mary, Y. Sheena; Panicker, C. Yohannan; Varghese, Hema Tresa; Van Alsenoy, Christian; Procházková, Markéta; Ševčík, Richard; Pazdera, Pavel

    2014-03-01

    We report the vibrational spectral analysis was carried out using FT-IR and FT-Raman spectroscopy for 1-(pyrid-4-yl)piperazine (PyPi). Single crystals of PyPi suitable for X-ray structural analysis were obtained. The acid-base properties are also reported. PyPi supported on a weak acid cation-exchanger in the single protonated form and this system can be used efficiently as the solid supported analogue of 4-N,N-dimethyl-aminopyridine. The complete vibrational assignments of wavenumbers were made on the basis of potential energy distribution. The HOMO and LUMO analysis is used to determine the charge transfer within the molecule and with the molecular electrostatic potential map was applied for the reactivity assessment of PyPi molecule toward proton, electrophiles and nucleopholes as well. The stability of the molecule arising from hyper-conjugative interaction and charge delocalization has been analyzed using NBO analysis. The calculated first hyperpolarizability of PyPi is 17.46 times that of urea.

  1. FT-IR, FT-Raman and computational study of (E)-N-carbamimidoyl-4-((4-methoxybenzylidene)amino)benzenesulfonamide.

    Science.gov (United States)

    Chandran, Asha; Varghese, Hema Tresa; Mary, Y Sheena; Panicker, C Yohannan; Manojkumar, T K; Van Alsenoy, Christian; Rajendran, G

    2012-06-15

    The FT-IR and FT-Raman spectra of (E)-N-carbamimidoyl-4-((4-methoxybenzylidene)amino)benzenesulfonamide were recorded and analyzed. Geometry and harmonic vibrational wavenumbers were calculated theoretically using Gaussian 03 set of quantum chemistry codes. Calculations were performed at the Hartree-Fock (HF) and density functional theory (DFT) levels of theory. The calculated wavenumbers (B3LYP) agree well with the observed wavenumbers. Potential energy distribution is done using GAR2PED program. The red shift of the N-H stretching bands in the infrared spectrum from the computed wavenumber indicates the weakening of the N-H bond. The calculated first hyperpolarizability is comparable with the reported value of similar derivative and may be an attractive object for further studies of nonlinear optics. The variations in the CN bond lengths of the title molecule suggest an extended π-electron delocalization over the sulfaguanidine moiety which is responsible for the nonlinearity of the molecule. The geometrical parameters of the title compound are in agreement with that of reported similar derivatives. Copyright © 2012 Elsevier B.V. All rights reserved.

  2. FT-IR, FT-Raman and UV spectroscopic investigation, electronic properties, electric moments, and NBO analysis of anethole using quantum chemical calculations.

    Science.gov (United States)

    Sinha, L; Prasad, O; Chand, S; Sachan, A K; Pathak, S K; Shukla, V K; Karabacak, M; Asiri, A M

    2014-12-10

    FT-IR and FT-Raman spectra of anethole (1-Methoxy-4-(1-propenyl)benzene), a flavoring agent of commercial value, have been recorded in the regions 4000-400 and 4000-100cm(-1) respectively. The structure of the title molecule has been optimized and the structural parameters have been calculated by DFT/B3LYP method with 6-311++G(d,p) basis set. The fundamental vibrational wavenumbers as well as their intensities were calculated and a good agreement between observed and scaled calculated wavenumbers has been achieved. UV-Vis spectrum of the title compound was recorded in the region 200-500nm and the electronic properties such as HOMO and LUMO energies and associated energy gap were calculated by Time dependent-density functional theory (TD-DFT) approach. Nonlinear optical (NLO) study divulges the nonlinear properties of the molecule. Stability of the title molecule arising from hyper-conjugative interactions and charge delocalization has been investigated using natural bond orbital (NBO) analysis. The theoretical results were found to be in coherence with the measured experimental data. Copyright © 2014 Elsevier B.V. All rights reserved.

  3. Conformational stability, spectroscopic (FT-IR, FT-Raman and UV-Vis) analysis, NLO, NBO, FMO and Fukui function analysis of 4-hexylacetophenone by density functional theory.

    Science.gov (United States)

    Saravanan, S; Balachandran, V

    2015-03-05

    The experimental and theoretical study on the structures and vibrations of 4-hexylacetophenone (abbreviated as 4HAP) are presented. The FT-IR and FT-Raman spectra of the title compound have been recorded in the region 4000-400cm(-1) and 3500-100cm(-1) respectively. The molecular structures, vibrational wavenumbers, infrared intensities and Raman activities were calculated using DFT (B3LYP and LSDA) method with 6-311++G(d,p) basis set. The most stable conformer of 4HAP is identified from the computational results. The assignments of the vibrational spectra have been carried out with the aid of normal coordinate analysis (NCA) following the scaled quantum mechanical force field methodology (SQMEF). The linear polarizability (α) and the first hyperpolarizability (βtot) values of the investigated molecule have been computed using B3LYP and LSDA with 6-311++G(d,p) basis set. Stability of the molecule arising from hyper conjugative interaction and charge transfer delocalization has been analyzed using natural bond orbital (NBO) analysis. The molecule orbital contributions are studied by density of energy states (DOSs). UV-Vis spectrum and effects of solvents have been discussed effects of solvents have been discussed and the electronic properties such as HOMO and LUMO energies were determined by time-dependent TD-DFT approach. Fukui function and Mulliken analysis on atomic charges of the title compound have been calculated. Finally, electrophilic and nucleophilic descriptors of the title molecule have been calculated.

  4. Molecular structure, spectroscopic (FT-IR, FT Raman, UV, NMR and THz) investigation and hyperpolarizability studies of 3-(2-Chloro-6-fluorophenyl)-1-(2-thienyl) prop-2-en-1-one

    Science.gov (United States)

    Kumar, Rajesh; Kumar, Amit; Deval, Vipin; Gupta, Archana; Tandon, Poonam; Patil, P. S.; Deshmukh, Prathmesh; Chaturvedi, Deepika; Watve, J. G.

    2017-02-01

    In the present work, a combined experimental and theoretical study on ground state molecular structure, spectroscopic and nonlinear optical properties of the chalcone derivative 3-(2-Chloro-6-fluorophenyl)-1-(2-thienyl) prop-2-en-1-one (2C6F2SC) is reported. Initial geometry generated from single crystal X-ray diffraction parameters was minimized at DFT level employing B3LYP/6-311++G (d,p) without any constraint to the potential energy surface. The molecule has been characterized using various experimental techniques FT-IR, FT-Raman, UV-Vis, 1H NMR, TD-THz and the spectroscopic data have been analyzed theoretically by Density Functional Theory (DFT) method. Harmonic vibrational frequencies were calculated theoretically using the optimized ground state geometry and the spectra were interpreted by means of potential energy distribution. Time Dependent Density Functional Theory (TD-DFT) has been used to calculate energies, absorption wavelengths, oscillator strengths of electronic singlet-singlet transitions. The calculated energy and oscillator strength complement with the experimental findings. The HOMO-LUMO energy gap explains the charge interaction taking place within the molecule. Good correlations between the experimental 1H NMR chemical shifts and calculated GIAO shielding tensors were found. Stability of the molecule, hyperconjugative interactions and charge delocalization has been analyzed by natural bond orbital (NBO) analysis. The first order hyperpolarizability (β) of this molecular system and related properties (μ, and Δα) have been calculated using the finite-field approach.

  5. Vibrational spectroscopy (FT-IR and FT-Raman) investigation, and hybrid computational (HF and DFT) analysis on the structure of 2,3-naphthalenediol.

    Science.gov (United States)

    Shoba, D; Periandy, S; Karabacak, M; Ramalingam, S

    2011-12-01

    The FT-IR and FT-Raman vibrational spectra of 2,3-naphthalenediol (C(10)H(8)O(2)) have been recorded using Bruker IFS 66V spectrometer in the range of 4000-100 cm(-1) in solid phase. A detailed vibrational spectral analysis has been carried out and the assignments of the observed fundamental bands have been proposed on the basis of peak positions and relative intensities. The optimized molecular geometry and vibrational frequencies in the ground state are calculated by using the ab initio Hartree-Fock (HF) and DFT (LSDA and B3LYP) methods with 6-31+G(d,p) and 6-311+G(d,p) basis sets. There are three conformers, C1, C2 and C3 for this molecule. The computational results diagnose the most stable conformer of title molecule as the C1 form. The isotropic computational analysis showed good agreement with the experimental observations. Comparison of the fundamental vibrational frequencies with calculated results by HF and DFT methods. Comparison of the simulated spectra provides important information about the capability of computational method to describe the vibrational modes. A study on the electronic properties, such as absorption wavelengths, excitation energy, dipole moment and Frontier molecular orbital energies, are performed by time dependent DFT approach. The electronic structure and the assignment of the absorption bands in the electronic spectra of steady compounds are discussed. The calculated HOMO and LUMO energies show that charge transfer occurs within the molecule. On the basis of the thermodynamic properties of the title compound at different temperatures have been calculated. The statistical thermodynamic properties (standard heat capacities, standard entropies, and standard enthalpy changes) and their correlations with temperature have been obtained from the theoretical vibrations.

  6. Characterization of prepared In2O3 thin films: The FT-IR, FT-Raman, UV-Visible investigation and optical analysis

    Science.gov (United States)

    Panneerdoss, I. Joseph; Jeyakumar, S. Johnson; Ramalingam, S.; Jothibas, M.

    2015-08-01

    In this original work, the Indium oxide (In2O3) thin film is deposited cleanly on microscope glass substrate at different temperatures by spray pyrolysis technique. The physical properties of the films are characterized by XRD, SEM, AFM and AFM measurements. The spectroscopic investigation has been carried out on the results of FT-IR, FT-Raman and UV-Visible. XRD analysis exposed that the structural transformation of films from stoichiometric to non-stoichiometric orientation of the plane vice versa and also found that, the film is polycrystalline in nature having cubic crystal structure with a preferred grain orientation along (2 2 2) plane. SEM and AFM studies revealed that, the film with 0.1 M at 500 °C has spherical grains with uniform dimension. The complete vibrational analysis has been carried out and the optimized parameters are calculated using HF and DFT (CAM-B3LYP, B3LYP and B3PW91) methods with 3-21G(d,p) basis set. Furthermore, NMR chemical shifts are calculated by using the gauge independent atomic orbital (GIAO) technique. The molecular electronic properties; absorption wavelengths, excitation energy, dipole moment and frontier molecular orbital energies, molecular electrostatic potential energy (MEP) analysis and Polarizability first order hyperpolarizability calculations are performed by time dependent DFT (TD-DFT) approach. The energy excitation on electronic structure is investigated and the assignment of the absorption bands in the electronic spectra of steady compound is discussed. The calculated HOMO and LUMO energies showed the enhancement of energy gap by the addition of substitutions with the base molecule. The thermodynamic properties (heat capacity, entropy, and enthalpy) at different temperatures are calculated and interpreted in gas phase.

  7. A combined experimental and theoretical studies on FT-IR, FT-Raman and UV-vis spectra of 2-chloro-3-quinolinecarboxaldehyde.

    Science.gov (United States)

    Prasad, M V S; Udaya Sri, N; Veeraiah, V

    2015-09-05

    In the present study, the FT-IR and FT-Raman spectra of 2-chloro-3-quinolinecarboxaldehyde (2Cl3QC) have been recorded in the region 4000-400 and 3500-50 cm(-1), respectively. The fundamental modes of vibrational frequencies of 2Cl3QC are assigned. Theoretical information on the optimized geometry, harmonic vibrational frequencies, infrared and Raman intensities were obtained by means of density functional theory (DFT) gradient calculations with complete relaxation in the potential energy surface using 6-31G(d,p) basis set. The vibrational frequencies which were determined experimentally from the spectral data are compared with those obtained theoretically from DFT calculations. A close agreement was achieved between the observed and calculated frequencies by refinement of the scale factors. The infrared and Raman spectra were also predicted from the calculated intensities. Thermodynamic properties like entropy, heat capacity, zero point energy, have been calculated for the molecule. The predicted first hyperpolarizability also shows that the molecule might have a reasonably good non-linear optical (NLO) behavior. The calculated HOMO-LUMO energy gap reveals that charge transfer occurs within the molecule. Stability of the molecule arising from hyper conjugative interactions, charge delocalization have been analyzed using natural bond orbitals (NBO) analysis. The results show that charge in electron density (ED) in the π(∗) antibonding orbitals and E((2)) energies confirms the occurrence of ICT (intra-molecular charge transfer) within the molecule. UV-visible spectrum of the title molecule has also been calculated using TD-DFT/CAM-B3LYP/6-31G(d,p) method. The calculated energy and oscillator strength almost exactly reproduces reported experimental data.

  8. Experimental FTIR, FT-IR (gas phase), FT-Raman and NMR spectra, hyperpolarizability studies and DFT calculations of 3,5-dimethylpyrazole.

    Science.gov (United States)

    Sundaraganesan, N; Kavitha, E; Sebastian, S; Cornard, J P; Martel, M

    2009-10-15

    In the present study, structural properties of 3,5-dimethylpyrazole (3,5-DMP) have been studied extensively utilizing density functional theory (DFT) employing B3LYP exchange correlation. The Fourier transform infrared (solid phase and gas phase) and Fourier transform Raman spectra of 3,5-DMP were recorded. The Vibrational frequencies of 3,5-DMP in the ground state have been calculated by using density functional method (B3LYP) with 6-31G(d,p), 6-311G(d,p) and 6-311++G(d,p) as basis sets. Comparison of the observed fundamental vibrational frequencies of 3,5-DMP with calculated results show that 6-311++G(d,p) superior to other basis sets for molecular vibrational problems. Non linear optical NLO behavior of the examined molecule was investigated by the determination of the electric dipole moment mu, the polarizability alpha and the hyperpolarizability beta using the B3LYP/cc-pvdz method. The isotropic chemical shifts computed by (13)C and (1)H NMR analysis also show good agreement with experimental observations. The theoretically predicted FTIR and FT-Raman spectra of the title molecule have been constructed.

  9. Antimycobacterial, antimicrobial activity, experimental (FT-IR, FT-Raman, NMR, UV-Vis, DSC) and DFT (transition state, chemical reactivity, NBO, NLO) studies on pyrrole-isonicotinyl hydrazine.

    Science.gov (United States)

    Rawat, Poonam; Singh, R N; Ranjan, Alok; Ahmad, Sartaj; Saxena, Rajat

    2017-05-15

    As part of a study of pyrrole hydrazone, we have investigated quantum chemical calculations, molecular geometry, relative energy, vibrational properties and antimycobacterial/antimicrobial activity of pyrrole-2-carboxaldehyde isonicotinyl hydrazone (PCINH), by applying the density functional theory (DFT) and Hartree Fock (HF). Good reproduction of experimental values is obtained and with small percentage error in majority of the cases in comparison to theoretical result (DFT). The experimental FT-IR and Raman wavenumbers were compared with the respective theoretical values obtained from DFT calculations and found to agree well. In crystal structure studies the hydrated PCINH (syn-syn conformer) shows different conformation than from anhydrous form (syn-anti conformer). The rotational barrier between syn-syn and syn-anti conformers of PCINH is 12.7kcal/mol in the gas phase. In this work, use of FT-IR, FT-Raman, (1)H NMR, (13)C NMR and UV-Vis spectroscopies has been made for full characterization of PCINH. A detailed interpretation of the vibrational spectrum was carried out with the aid of normal coordinate analysis using single scaling factor. Our results support the hydrogen bonding pattern proposed by reported crystalline structure. The calculated nature of electronic transitions within molecule found to be π→π*. The electronic descriptors study indicates that PCINH can be used as robust synthon for synthesis of new heterocyclic compounds. The first static hyperpolarizability (β0) of PCINH is calculated as 33.89×10(-30)esu, (gas phase); 68.79×10(-30) (CHCl3), esu; 76.76×10(-30)esu (CH2Cl2), 85.16×10(-30)esu (DMSO). The solvent induced effects on the first static hyperpolarizability were studied and found to increase as dielectric constants of the solvents increases. Investigated molecule shows better NLO value than Para nitroaniline (PNA). The compound PCINH shows good antifungal and antibacterial activity against Aspergillus niger and gram

  10. HOMO-LUMO, UV, NLO, NMR and vibrational analysis of 3-methyl-1-phenylpyrazole using FT-IR, FT-RAMAN FT-NMR spectra and HF-DFT computational methods

    Science.gov (United States)

    Carthigayan, K.; Xavier, S.; Periandy, S.

    2015-05-01

    In this paper, the spectral analysis of 3-methyl-1-phenylpyrazole is carried out using the FT-IR, FT Raman, FT NMR and UV-Vis spectra with the help of quantum mechanical computations using HF and density functional theories. The different conformers of the compound and their minimum energies are studied using B3LYP functional with 6-311+G (d, p) basis set and the most stable conformer with minimum energy was identified and the same conformer was used for further computations. The computed wave numbers from different methods are scaled so as to agree with the experimental values and the scaling factors are reported. All the modes of vibrations are assigned and the structure the molecule is analyzed in terms of parameters like bond length, bond angle and dihedral angle predicted by both HF and B3LYP methods with 6-311+G (d, p) and 6-311++G (d, p) basis sets. The values of dipole moment (μ), polarizability (α) and hyperpolarizability (β) of the molecule are reported, using which the non-linear property of the molecule is discussed. The HOMO-LUMO mappings are reported which reveals the different charge transfer possibilities within the molecule. The isotropic chemical shifts predicted for 1H and 13C atoms using gauge invariant atomic orbital (GIAO) theory show good agreement with experimental shifts. NBO analysis is carried out to picture the charge transfer between the localized bonds and lone pairs. The thermodynamic properties (heat capacity, entropy and enthalpy) at different temperatures are also calculated.

  11. An experimental and theoretical investigation of Acenaphthene-5-boronic acid: conformational study, NBO and NLO analysis, molecular structure and FT-IR, FT-Raman, NMR and UV spectra.

    Science.gov (United States)

    Karabacak, Mehmet; Sinha, Leena; Prasad, Onkar; Asiri, Abdullah M; Cinar, Mehmet

    2013-11-01

    The solid state Fourier transform infrared (FT-IR) and FT-Raman spectra of Acenaphthene-5-boronic acid (AN-5-BA), have been recorded in the range 4000-400cm(-1) and 4000-10cm(-1), respectively. Density functional theory (DFT), with the B3LYP functional was used for the optimization of the ground state geometry and simulation of the infrared and Raman spectra of the molecule. The vibrational wave numbers and their assignments were examined theoretically using the Gaussian 09 set of quantum chemistry codes and the normal modes were assigned by a scaled quantum mechanical (SQM) force field approach. Hydrogen-bonded dimer of AN-5-BA, optimized by counterpoise correction, has also been studied by B3LYP at the 6-311++G(d,p) level and the effects of molecular association through O-H⋯O hydrogen bonding have been discussed. The (1)H and (13)C nuclear magnetic resonance (NMR) chemical shifts of the molecule were calculated by Gauge-Including Atomic Orbital (GIAO) method. Natural bond orbital (NBO) analysis has been applied to study stability of the molecule arising from charge delocalization. UV spectrum of the title compound was also recorded and the electronic properties, such as frontier orbitals, and band gap energies were measured by TD-DFT approach. The first order hyperpolarizability 〈β〉, its components and associated properties such as average polarizability and anisotropy of the polarizability (α and Δα) of AN-5-BA was calculated using the finite-field approach.

  12. Spectroscopic (FT-IR, FT-Raman, NMR and UV-Visible) and quantum chemical studies of molecular geometry, Frontier molecular orbital, NLO, NBO and thermodynamic properties of salicylic acid

    Science.gov (United States)

    Suresh, S.; Gunasekaran, S.; Srinivasan, S.

    2014-11-01

    The solid phase FT-IR and FT-Raman spectra of 2-hydroxybenzoic acid (salicylic acid) have been recorded in the region 4000-400 and 4000-100 cm-1 respectively. The optimized molecular geometry and fundamental vibrational frequencies are interpreted with the aid of structure optimizations and normal coordinate force field calculations based on density functional theory (DFT) method and a comparative study between Hartree Fork (HF) method at 6-311++G(d,p) level basis set. The calculated harmonic vibrational frequencies are scaled and they are compared with experimentally obtained FT-IR and FT-Raman spectra. A detailed interpretation of the vibrational spectra of this compound has been made on the basis of the calculated potential energy distribution (PED). The time dependent DFT method is employed to predict its absorption energy and oscillator strength. The linear polarizability (α) and the first order hyper polarizability (β) values of the investigated molecule have been computed. The electronic properties, such as HOMO and LUMO energies, molecular electrostatic potential (MEP) are also performed. Stability of the molecule arising from hyper conjugative interaction, charge delocalization has been analyzed using natural bond orbital (NBO) analysis.

  13. Spectroscopic (FT-IR, FT-Raman, NMR and UV-Visible) and quantum chemical studies of molecular geometry, Frontier molecular orbital, NLO, NBO and thermodynamic properties of salicylic acid.

    Science.gov (United States)

    Suresh, S; Gunasekaran, S; Srinivasan, S

    2014-11-11

    The solid phase FT-IR and FT-Raman spectra of 2-hydroxybenzoic acid (salicylic acid) have been recorded in the region 4000-400 and 4000-100 cm(-1) respectively. The optimized molecular geometry and fundamental vibrational frequencies are interpreted with the aid of structure optimizations and normal coordinate force field calculations based on density functional theory (DFT) method and a comparative study between Hartree Fork (HF) method at 6-311++G(d,p) level basis set. The calculated harmonic vibrational frequencies are scaled and they are compared with experimentally obtained FT-IR and FT-Raman spectra. A detailed interpretation of the vibrational spectra of this compound has been made on the basis of the calculated potential energy distribution (PED). The time dependent DFT method is employed to predict its absorption energy and oscillator strength. The linear polarizability (α) and the first order hyper polarizability (β) values of the investigated molecule have been computed. The electronic properties, such as HOMO and LUMO energies, molecular electrostatic potential (MEP) are also performed. Stability of the molecule arising from hyper conjugative interaction, charge delocalization has been analyzed using natural bond orbital (NBO) analysis. Published by Elsevier B.V.

  14. Spectroscopic (FT-IR, FT-Raman and UV) investigation, NLO, NBO, molecular orbital and MESP analysis of 2-{2-[(2,6-dichlorophenyl)amino]phenyl}acetic acid

    Science.gov (United States)

    Govindasamy, P.; Gunasekaran, S.

    2015-02-01

    In this work, FT-IR and FT-Raman spectra of 2-{2-[(2,6-dichlorophenyl)amino]phenyl}acetic acid (abbreviated as 2DCPAPAA) have been reported in the regions 4000-450 cm-1 and 4000-50 cm-1, respectively. The molecular structure, geometry optimization, intensities, vibrational frequencies were obtained by the ab initio and DFT levels of theory B3LYP with 6-311++G(d,p) standard basis set and a different scaling of the calculated wave numbers. The complete vibrational assignments were performed on the basis of the potential energy distribution (PED) of the vibrational modes calculated using vibrational energy distribution analysis (VEDA 4) program. The harmonic frequencies were calculated and the scaled values were compared with experimental FT-IR and FT-Raman data. The observed and the calculated frequencies are found to be in good agreement. Stability of the molecule arising from hyper conjugative interactions, charge delocalization has been analyzed using natural bond orbital (NBO) analysis. The thermodynamic properties of the title compound at different temperature reveal the correlations between standard heat capacities (C) standard entropies (S) standard enthalpy changes (ΔH). The important non-linear optical properties such as electric dipole momentum, polarizability and first hyperpolarizability of 2DCPAPAA have been computed using B3LYP/6-311++G(d,p) quantum chemical calculations. The Natural charges, HOMO, LUMO, chemical hardness (η), chemical potential (μ), Electro negativity (χ) and electrophilicity values (ω) are calculated and reported. The oscillator's strength, wave length, and energy calculated by TD-DFT and 2DCPAPAA is approach complement with the experimental findings. The molecular electrostatic potential (MESP) surfaces of the molecule were constructed.

  15. Characterization of 1,5-dimethoxynaphthalene by vibrational spectroscopy (FT-IR and FT-Raman) and density functional theory calculations.

    Science.gov (United States)

    Kandasamy, M; Velraj, G; Kalaichelvan, S; Mariappan, G

    2015-01-05

    In this work, we reported a combined experimental and theoretical study on molecular structure, vibrational spectra and natural bond orbital (NBO) analysis of 1,5-dimethoxynaphthalene. The optimized molecular structure, atomic charges, vibrational frequencies and natural bond orbital analysis of 1,5-dimethoxynaphthalene have been studied by performing DFT/B3LYP/6-31G(d,p) level of theory. The FTIR, FT-Raman spectra were recorded in the region of 4000-400 cm(-1) and 3500-50 cm(-1) respectively. The scaled wavenumbers are compared with the experimental values. The difference between the observed and scaled wavenumber values of the most fundamentals is very small. The formation of hydrogen bond was investigated in terms of the charge density by the NBO analysis. Natural Population Analysis (NPA) was used for charge determination in the title molecule. Besides, molecular electrostatic potential (MEP), frontier molecular orbitals (FMO) analysis were investigated using theoretical calculations.

  16. FT-Raman, FT-IR and UV-visible spectral investigations and ab initio computations of anti-epileptic drug: vigabatrin.

    Science.gov (United States)

    Edwin, Bismi; Joe, I Hubert

    2013-10-01

    Vibrational analysis of anti-epileptic drug vigabatrin, a structural GABA analog was carried out using NIR FT-Raman and FTIR spectroscopic techniques. The equilibrium geometry, various bonding features and harmonic vibrational wavenumbers were studied using density functional theory method. The detailed interpretation of the vibrational spectra has been carried out with the aid of VEDA.4 program. Vibrational spectra, natural bond orbital analysis and optimized molecular structure show clear evidence for the effect of electron charge transfer on the activity of the molecule. Predicted electronic absorption spectrum from TD-DFT calculation has been compared with the UV-vis spectrum. The Mulliken population analysis on atomic charges and the HOMO-LUMO energy were also calculated. Good consistency is found between the calculated results and experimental data for the electronic absorption as well as IR and Raman spectra. The blue-shifting of the C-C stretching wavenumber reveals that the vinyl group is actively involved in the conjugation path. The NBO analysis confirms the occurrence of intramolecular hyperconjugative interactions resulting in ICT causing stabilization of the system. Copyright © 2013 Elsevier B.V. All rights reserved.

  17. Advanced discriminating criteria for natural organic substances of cultural heritage interest: spectral decomposition and multivariate analyses of FT-Raman and FT-IR signatures.

    Science.gov (United States)

    Daher, Céline; Bellot-Gurlet, Ludovic; Le Hô, Anne-Solenn; Paris, Céline; Regert, Martine

    2013-10-15

    Natural organic substances are involved in many aspects of the cultural heritage field. Their presence in different forms (raw, heated, mixed), with various conservation states, constitutes a real challenge regarding their recognition and discrimination. Their characterization usually involves the use of separative techniques which imply destructive sampling and specific analytical preparations. Here we propose a non destructive approach using FT-Raman and infrared spectroscopies for the identification and differentiation of natural organic substances. Because of their related functional groups, they usually present similar vibrational signatures. Nevertheless the use of appropriate signal treatment and statistical analysis was successfully carried out to overcome this limitation, then proposing new objective discriminating methodology to identify these substances. Spectral decomposition calculations were performed on the CH stretching region of a large set of reference materials such as resins, oils, animal glues, and gums. Multivariate analyses (Principal Component Analyses) were then performed on the fitting parameters, and new discriminating criteria were established. A set of previously characterized archeological resins, with different surface aspects or alteration states, was analyzed using the same methodology. These testing samples validate the efficiency of our discriminating criteria established on the reference corpus. Moreover, we proved that some alteration or ageing of organic materials is not an issue to their recognition.

  18. Synthesis, electronic structure investigation of 3-pentyl-2,6-di(furan-2-yl)piperidin-4-one by FT-IR, FT-Raman and UV-Visible spectral studies and ab initio/DFT calculations.

    Science.gov (United States)

    Arockia Doss, M; Savithiri, S; Rajarajan, G; Thanikachalam, V; Anbuselvan, C

    2015-12-05

    FT-IR and FT-Raman spectra of 3-pentyl-2,6-di(furan-2-yl) piperidin-4-one (3-PFPO) were recorded in the solid phase. The structural and spectroscopic analyses of 3-PFPO were made by using B3LYP/HF level with 6-311++G(d, p) basis set. The fundamental vibrations are assigned on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method and PQS program. Comparison of the observed fundamental vibrational frequencies of 3-PFPO with calculated results by HF and DFT methods indicates that B3LYP is superior to HF method for molecular vibrational problems. The electronic properties such as excitation energies, oscillator strength, wavelengths and HOMO-LUMO energies were obtained by time-dependent DFT (TD-DFT) approach. The polarizability and first order hyperpolarizability of the title molecule were calculated and interpreted. The hyperconjugative interaction energy (E((2))) and electron densities of donor (i) and acceptor (j) bonds were calculated using NBO analysis. In addition, MEP and atomic charges of carbon, nitrogen, oxygen and hydrogen were calculated using B3LYP/6-311++G(d, p) level theory. Moreover, thermodynamic properties (heat capacities, entropy and enthalpy) of the title compound at different temperatures were calculated in gas phase. Copyright © 2015 Elsevier B.V. All rights reserved.

  19. Spectroscopic investigation (FT-IR and FT-Raman), vibrational assignments, HOMO-LUMO analysis and molecular docking study of 2-(Adamantan-1-yl)-5-(4-nitrophenyl)-1,3,4-oxadiazole

    Science.gov (United States)

    Haress, Nadia G.; Al-Omary, Fatmah; El-Emam, Ali A.; Mary, Y. Sheena; Panicker, C. Yohannan; Al-Saadi, Abdulaziz A.; War, Javeed Ahmad; Van Alsenoy, Christian

    2015-01-01

    FT-IR and FT-Raman spectra of 2-(Adamantan-1-yl)-5-(4-nitrophenyl)-1,3,4-oxadiazole were recorded and analyzed. The vibrational wavenumbers were computed using DFT quantum chemical calculations. The data obtained from wavenumber calculations are used to assign vibrational bands obtained experimentally. The energy barriers of the internal rotations about the Csbnd C bonds connecting the oxadiazole to the adamantane and benzene rings are reported. The geometrical parameters (DFT) of the title compound are in agreement with the XRD results. The calculated HOMO and LUMO energies allow the calculations of atomic and molecular properties and they also showed that charge transfer occurs in the molecule. A detailed molecular picture of the title compound and its interactions were obtained from NBO analysis. As can be seen from the MEP map of the title compound, which regions having the negative potential are over the electro negative atoms, the region having the positive potential are over the phenyl and adamantine rings and the remaining species are surrounded by zero potential. The molecular docking studies reveal that the adamantyl derivative may exhibit C-South African HIV-proteas inhibitory activity.

  20. Normal coordinate analysis and vibrational spectroscopy (FT-IR and FT-Raman) studies of (2S)-2-amino-3-(3,4-dihydroxyphenyl)-2-methylpropanoic acid using ab initio HF and DFT method.

    Science.gov (United States)

    Prabakaran, A; Muthu, S

    2012-12-01

    The FT-IR and FT-Raman spectra of (2S)-2-amino-3-(3,4-dihydroxyphenyl)-2-methylpropanoic acid (2ADMA) were recorded in the region 4000-400 cm(-1) and 4000-100 cm(-1), respectively. The geometrical structure, harmonic vibrational frequency, infrared intensity, Raman activities and bonding features of this compound was carried out by ab initio HF and DFT methods with 6-31G (d,p) basis set. The complete vibrational frequency assignments were made by normal coordinate analysis (NCA) following the scaled quantum mechanical force field methodology (SQMF). The electric dipole moment (μ) and the first-order hyperpolarizability (β(0)) values have been the computed quantum mechanically. The calculated HOMO and LUMO energies show that, the charge transfer occurs within the molecule. The charge delocalizations of these molecules have been analyzed using NBO analysis. The solvent effects have been calculated using TD-DFT in combination with the polarized continuum model (PCM), and the results are in good agreement with experimental measurements. The other molecular properties like Mulliken population analysis, electrostatic potential (ESP) and thermodynamic properties of the title compound at the different temperatures have been calculated. Finally, the calculation results were applied to simulate infrared and Raman spectra of the title compound which shows good agreement with observed spectra.

  1. Normal coordinate analysis and vibrational spectroscopy (FT-IR and FT-Raman) studies of 5-methyl-N-[4-(trifluoromethyl) phenyl]-isoxazole-4-carboxamide using density functional method.

    Science.gov (United States)

    Shahidha, R; Muthu, S; Elamurugu Porchelvi, E; Govindarajan, M

    2014-11-11

    Vibrational spectral analysis of 5-methyl-N-[4-(trifluoromethyl) phenyl]-isoxazole-4-carboxamide is (5MN4TPI4C) molecule was carried out using FT-IR and FT-Raman spectroscopic techniques. The equilibrium geometry, harmonic vibrational wavenumbers, various bonding features have been computed using density functional B3LYP method with 6-311G(d,p) as basis set. The assignments of the vibrational spectra have been carried out with the aid of normal coordinate analysis (NCA) following the scaled quantum mechanical force field methodology (SQMFFM). Stability of the molecule arising from hyper conjugative interactions, charge delocalization has been analyzed using natural bond orbital (NBO) analysis. The non-linear optical (NLO) behavior of 5MN4TPI4C has been studied by determination of the electric dipole moment (μ) and hyperpolarizability (β) by using B3LYP/6-311G(d,p) method. The molecular orbital compositions and their contributions to the chemical bonding are studied by Total density of energy states (TDOS), sum of α and β electron (αβDOS) density of states. Thermodynamic properties (heat capacity, entropy and enthalpy) of the title compound at different temperatures are calculated.

  2. Molecular structure, spectroscopic (FT-IR, FT-Raman, NMR, UV) studies and first-order molecular hyperpolarizabilities of 1,2-bis(3-methoxy-4-hydroxybenzylidene)hydrazine by density functional method

    Science.gov (United States)

    Subramanian, N.; Sundaraganesan, N.; Jayabharathi, J.

    2010-07-01

    Quantum chemical calculations of energies, geometrical structure and vibrational wavenumbers of 1,2-bis(3-methoxy-4-hydroxybenzylidene)hydrazine [vanillin azine (VA)] were carried out by using density functional (DFT/B3LYP) method with 6-31G(d) as basis set. The optimized geometrical parameters obtained by DFT calculations are in good agreement with single crystal XRD data. The vibrational spectral data obtained from solid phase FT-IR and FT-Raman spectra are assigned based on the results of the theoretical calculations. The observed spectra are found to be in good agreement with calculated values. The electric dipole moment ( μ) and the first hyperpolarizability ( β) values of the investigated molecule have been computed using ab initio quantum mechanical calculations. The calculation results also show that the VA molecule might have microscopic nonlinear optical (NLO) behavior with non-zero values. A detailed interpretation of the infrared and Raman spectra of VA was also reported. The energy and oscillator strength calculated by time-dependent density functional theory (TD-DFT) results complements with the experimental findings. The calculated HOMO and LUMO energies show that charge transfer occurs within the molecule. The theoretical NMR chemical shifts complement with experimentally measured ones.

  3. Spectroscopic (FT-IR, FT-Raman, and UV-visible) and quantum chemical studies on molecular geometry, Frontier molecular orbitals, NBO, NLO and thermodynamic properties of 1-acetylindole.

    Science.gov (United States)

    Shukla, Vikas K; Al-Abdullah, Ebtehal S; El-Emam, Ali A; Sachan, Alok K; Pathak, Shilendra K; Kumar, Amarendra; Prasad, Onkar; Bishnoi, Abha; Sinha, Leena

    2014-12-10

    Quantum chemical calculations of ground state energy, geometrical structure and vibrational wavenumbers of 1-acetylindole were carried out using density functional (DFT/B3LYP) method with 6-311++G(d,p) basis set. The FT-IR and FT-Raman spectra were recorded in the condensed state. The fundamental vibrational wavenumbers were calculated and a good correlation between experimental and scaled calculated wavenumbers has been accomplished. Electric dipole moment, polarizability and first static hyperpolarizability values of 1-acetylindole have been calculated at the same level of theory and basis set. The results show that the 1-acetylindole molecule possesses nonlinear optical (NLO) behavior with non-zero values. Stability of the molecule arising from hyper-conjugative interactions and charge delocalization has been analyzed using natural bond orbital (NBO) analysis. UV-Visible spectrum of the molecule was recorded in the region 200-500nm and the electronic properties like HOMO and LUMO energies and composition were obtained using TD-DFT method. The calculated energies and oscillator strengths are in good correspondence with the experimental data. The thermodynamic properties of the compound under investigation were calculated at different temperatures. Copyright © 2014 Elsevier B.V. All rights reserved.

  4. FT-IR, FT-Raman and NMR characterization of 2-isopropyl-5-methylcyclohexyl quinoline-2-carboxylate and investigation of its reactive and optoelectronic properties by molecular dynamics simulations and DFT calculations

    Science.gov (United States)

    Menon, Vidya V.; Fazal, Edakot; Mary, Y. Sheena; Panicker, C. Yohannan; Armaković, Stevan; Armaković, Sanja J.; Nagarajan, Subban; Van Alsenoy, C.

    2017-01-01

    The FT-IR and FT-Raman spectra of the synthesized compound, 2-isopropyl-5-methylcyclohexyl quinoline-2-carboxylate is recorded and analyzed. Optimized molecular structure, wave numbers, corresponding assignments regarding 2-isopropyl-5-methylcyclohexyl quinoline-2-carboxylate has become screened tentatively as well as hypothetically using Gaussian09 program package. Natural bonding orbital assessment has been completed with a reason to clarify charge transfer or conjugative interaction, the intra-molecular re-hybridization and delocalization of electron density within the molecule. The NMR spectral assessment had been made choosing structure property relationship by chemical shifts along with the magnetic shielding effects regarding the title compound. The first and second hyperpolarizabilities were calculated. The calculated first order hyperpolarizability is commensurate with the documented worth of very similar derivatives and could be an interesting object for more experiments on nonlinear optics. Local reactivity properties have been investigated using average local ionization energies and Fukui functions. Investigation of optoelectronic properties encompassed calculations of reorganization energies and hopping rates of charge carriers within the framework of Marcus semi-empiric approach. The docked ligand title compound forms a stable complex with CDK inhibitors and gives a binding affinity value of -9.7 kcal/mol and molecular docking results suggest that the compound might exhibit inhibitory activity against CDK inhibitors.

  5. Theoretical study on molecular structure and vibrational analysis included FT-IR, FT-Raman and UV techniques of 2,4,5-trimethylbenzoic acid (monomer and dimer structures)

    Science.gov (United States)

    Karabacak, Mehmet; Bilgili, Sibel; Atac, Ahmet

    2015-01-01

    Theoretical study on the structural and vibrational analysis of monomer and dimer structures of 2,4,5-trimethylbenzoic acid (2,4,5-TMBA, C10H12O2) were presented. The geometry of the molecule was fully optimized. The Fourier transform infrared (FT-IR) and the Fourier transform Raman (FT-Raman) spectra of the title molecule in solid phase were recorded in the region 4000-400 cm-1 and 4000-50 cm-1, respectively. The geometrical parameters and energies were investigated with the help of Density Functional Theory (DFT) employing B3LYP method and 6-311++G(d,p) basis set. The spectroscopic data of the molecule in the ground state were calculated by using DFT/B3LYP method with the 6-311++G(d,p) basis set. The vibrational spectra were calculated and fundamental vibrations were assigned on the basis of the potential energy distribution (PED) of the vibrational modes. The geometric parameters were compared with experimental data of the title molecule. The UV absorption spectrum of the studied compound was computed and recorded in the range of 190-400 nm dissolved in water and ethanol. Besides, charge transfer occurring in the molecule between HOMO and LUMO energies, frontier energy gap, molecular electrostatic potential (MEP) were calculated and presented. In addition these, thermodynamic properties and Mulliken atomic charges were performed.

  6. Conformational stability, vibrational spectra, HOMO-LUMO and NBO analysis of 1,3,4-thiadiazolidine-2,5-dithione with experimental (FT-IR and FT-Raman) techniques and scaled quantum mechanical calculations.

    Science.gov (United States)

    Xavier, R John; Dinesh, P

    2013-09-01

    The experimental and theoretical study on the structure and vibrations of 1,3,4-thiadiazolidine-2,5-dithione (TDZD) is presented. The FT-IR spectra (4000-400 cm(-1)) and the FT-Raman spectra (4000-50 cm(-1)) of the title molecule have been recorded. The energies of TDZD were obtained for all the possible four conformers from HF and DFT with 6-311G(d,p) and 6-311++G(d,p) basis set calculations. From the computational results, conformer C4 is identified as the most stable conformers of TDZD. The spectroscopic and theoretical results are compared with the corresponding properties for TDZD of C4 conformer. The temperature dependence of thermodynamic properties has been analyzed. Molecular stability and bond strength were investigated by applying the natural bond orbital analysis (NBO). The calculated HOMO and LUMO energies show that charge transfer occurs in the molecules. Information about the size, shape, charge density distribution, and site of chemical reactivity of the molecules has been obtained by mapping electron density isosurface with electrostatic potential (ESP). The dipole moment (λ) and polarizability (α), anisotropy polarizability (Δα) and first hyperpolarizability (βtotal) of the molecule have been reported.

  7. FT-Raman, FT-IR, UV spectroscopic, NBO and DFT quantum chemical study on the molecular structure, vibrational and electronic transitions of clopidogrel hydrogen sulfate form 1: a comparison to form 2.

    Science.gov (United States)

    Srivastava, Anubha; Mishra, Rashmi; Tandon, Poonam; Bansal, A K

    2013-03-01

    Clopidogrel hydrogen sulfate (+)-(S)-(2-chlorophenyl)-6,7-dihydrothieno[3,2-c]pyridine-5(4H)-acetate sulfate (1:1), is a selective adenosine diphosphate (ADP) receptor antagonist often used in the treatment of coronary artery, peripheral vascular and cerebrovascular diseases. In the present communication, a comparative study of two polymorphic forms (forms 1 and 2) of clopidogrel hydrogen sulfate (CLP) has been reported. There is difference in conformation and intermolecular hydrogen bonding pattern of two forms. These differences are nicely reflected in the vibrational spectra. The molecular structure, fundamental vibrational frequencies and intensity of the vibrational bands of CLP form 1 are interpreted with the aid of structure optimizations and normal mode analysis based on ab initio HF and DFT method employing 6-311++G(d,p) basis. Polymorphism in CLP have been studied using various characterization tools like FT-Raman, FT-IR spectroscopy and DSC in combination with the quantum chemical calculations. UV-vis spectroscopic studies along with HOMO-LUMO analysis of both polymorphs were performed. The solvent effect calculated by TD-DFT/IEF-PCM/6-31G model results complements with the experimental findings. Stability of the molecule arising from hyper conjugative interactions and charge delocalization has been analyzed using natural bond orbital (NBO) analysis.

  8. FT-Raman, FT-IR, UV spectroscopic, NBO and DFT quantum chemical study on the molecular structure, vibrational and electronic transitions of clopidogrel hydrogen sulfate form 1: A comparison to form 2

    Science.gov (United States)

    Srivastava, Anubha; Mishra, Rashmi; Tandon, Poonam; Bansal, A. K.

    2013-03-01

    Clopidogrel hydrogen sulfate (+)-(S)-(2-chlorophenyl)-6,7-dihydrothieno[3,2-c]pyridine-5(4H)-acetate sulfate (1:1), is a selective adenosine diphosphate (ADP) receptor antagonist often used in the treatment of coronary artery, peripheral vascular and cerebrovascular diseases. In the present communication, a comparative study of two polymorphic forms (forms 1 and 2) of clopidogrel hydrogen sulfate (CLP) has been reported. There is difference in conformation and intermolecular hydrogen bonding pattern of two forms. These differences are nicely reflected in the vibrational spectra. The molecular structure, fundamental vibrational frequencies and intensity of the vibrational bands of CLP form 1 are interpreted with the aid of structure optimizations and normal mode analysis based on ab initio HF and DFT method employing 6-311++G(d,p) basis. Polymorphism in CLP have been studied using various characterization tools like FT-Raman, FT-IR spectroscopy and DSC in combination with the quantum chemical calculations. UV-vis spectroscopic studies along with HOMO-LUMO analysis of both polymorphs were performed. The solvent effect calculated by TD-DFT/IEF-PCM/6-31G model results complements with the experimental findings. Stability of the molecule arising from hyper conjugative interactions and charge delocalization has been analyzed using natural bond orbital (NBO) analysis.

  9. Synthesis, spectroscopic (FT-IR, FT-Raman, NMR, UV-Visible), Fukui function, antimicrobial and molecular docking study of (E)-1-(3-bromobenzylidene)semicarbazide by DFT method

    Science.gov (United States)

    Raja, M.; Raj Muhamed, R.; Muthu, S.; Suresh, M.; Muthu, K.

    2017-02-01

    The title compound, (E)-1-(3-bromobenzylidene)semicarbazide (3BSC) was synthesized and characterized by FT-IR, FT-Raman, UV, 1HNMR and 13CNMR spectral analysis. The optimized molecular geometry, the vibrational wavenumbers, the infrared intensities and the Raman scattering activities were calculated by using density functional theory (DFT) B3LYP method with 6-311++G(d,p) basis set. The calculated HOMO and LUMO energies show that charge transfer within the molecule. Stability of the molecule arising from hyperconjugative interactions, charge delocalization have been analyzed using natural bond orbital analysis (NBO). The hyperpolarizability calculation reveals the present material has a reasonably good propensity for nonlinear optical activity. Molecular electrostatic potential (MEP) and Fukui functions were also performed. The thermodynamic properties (heat capacity, entropy, and enthalpy) of the 3BSC at different temperatures have been calculated. The biological applications of 3BSC have been screened for its antimicrobial activity and found to exhibit antifungal and antibacterial effects. In addition, the Molecular docking was also performed for the different receptors.

  10. Molecular structure, vibrational spectroscopic (FT-IR, FT-Raman), UV-vis spectra, first order hyperpolarizability, NBO analysis, HOMO and LUMO analysis, thermodynamic properties of benzophenone 2,4-dicarboxylic acid by ab initio HF and density functional method.

    Science.gov (United States)

    Chaitanya, K

    2012-02-01

    The FT-IR (4000-450 cm(-1)) and FT-Raman spectra (3500-100 cm(-1)) of benzophenone 2,4-dicarboxylic acid (2,4-BDA) have been recorded in the condensed state. Density functional theory calculation with B3LYP/6-31G(d,p) basis set have been used to determine ground state molecular geometries (bond lengths and bond angles), harmonic vibrational frequencies, infrared intensities, Raman activities and bonding features of the title compounds. The assignments of the vibrational spectra have been carried out with the help of normal co-ordinate analysis (NCA) following the scaled quantum mechanical force field (SQMFF) methodology. The first order hyperpolarizability (β0) and related properties (β, α0 and Δα) of 2,4-BDA is calculated using HF/6-31G(d,p) method on the finite-field approach. The stability of molecule has been analyzed by using NBO analysis. The calculated first hyperpolarizability shows that the molecule is an attractive molecule for future applications in non-linear optics. The calculated HOMO and LUMO energies show that charge transfer occurs within these molecules. Mulliken population analysis on atomic charges is also calculated. Because of vibrational analyses, the thermodynamic properties of the title compound at different temperatures have been calculated. Finally, the UV-vis spectra and electronic absorption properties were explained and illustrated from the frontier molecular orbitals.

  11. Structural, vibrational (FT-IR and FT-Raman) and UV-Vis spectral analysis of 1-phenyl-3-(1,2,3-thiadiazol-5-yl)urea by DFT method.

    Science.gov (United States)

    Meganathan, C; Sebastian, S; Sivanesan, I; Lee, Keun Woo; Jeong, Byoung Ryong; Oturak, Halil; Sudha, S; Sundaraganesan, N

    2012-09-01

    The Fourier Transform Infrared (FT-IR) and FT-Raman spectra of 1-phenyl-3-(1,2,3-thiadiazol-5-yl)urea (TDZ) have been recorded and analyzed. The molecular structure and vibrational spectra (harmonic and anharmonic) of TDZ were calculated by the Density Functional Theory (DFT) method using the B3LYP function with 6-31G(d,p) as the basis set. A detailed interpretation of the Infrared and Raman spectra of TDZ was reported based on Potential Energy Distribution (PED). The first order hyperpolarizability (β(0)) of this novel molecular system and related properties (β, α(0) and Δα) were calculated using HF/6-31G(d,p) method on the finite-field approach. Stability of the molecule arising from hyperconjugative interactions and charge delocalization have been analyzed using Natural Bond Orbital analysis. The results show that charge in electron density in the σ(∗) and π(∗) antibonding orbitals and second order delocalization energies E(2) confirm the occurrence of Intramolecular Charge Transfer (ICT) within the molecule. UV-Vis spectrum of the title molecule was recorded and the electronic properties such as HOMO and LUMO energies were determined by Time-Dependent Density Functional Theory approach.

  12. Synthesis, spectroscopic (FT-IR, FT-Raman, NMR, UV-Visible), NLO, NBO, HOMO-LUMO, Fukui function and molecular docking study of (E)-1-(5-bromo-2-hydroxybenzylidene)semicarbazide

    Science.gov (United States)

    Raja, M.; Raj Muhamed, R.; Muthu, S.; Suresh, M.

    2017-08-01

    The title compound, (E)-1-(5-bromo-2-hydroxybenzylidene)semicarbazide (15BHS) was synthesized and characterized by FT-IR, FT-Raman, UV, 1HNMR and 13CNMR spectral analysis. The optimized molecular geometry, the vibrational wavenumbers, the infrared intensities and the Raman scattering activities were calculated by using density functional theory(DFT) B3LYP method with 6-311++G(d,p) basis set. The detailed interpretation of the vibrational spectra has been carried out by VEDA program. The calculated HOMO and LUMO energies show that charge transfer within the molecule. Stability of the molecule arising from hyperconjugative interactions, charge delocalization have been analyzed using natural bond orbital analysis (NBO). The first order hyperpolarizability, Molecular electrostatic potential (MEP) and Fukui functions were also performed. To study the biological activity of the investigation molecule, molecular docking was done to identify the hydrogen bond lengths and binding energy with different antifungal proteins. The thermodynamic properties (heat capacity, entropy, and enthalpy) of the 15BHS at different temperatures have been calculated.

  13. Vibrational spectroscopic (FT-IR, FT-Raman, ¹H NMR and UV) investigations and computational study of 5-nitro-2-(4-nitrobenzyl) benzoxazole.

    Science.gov (United States)

    Bhagyasree, J B; Varghese, Hema Tresa; Panicker, C Yohannan; Samuel, Jadu; Van Alsenoy, Christian; Bolelli, Kayhan; Yildiz, Ilkay; Aki, Esin

    2013-02-01

    The optimized molecular structure, vibrational frequencies, corresponding vibrational assignments of 5-nitro-2-(4-nitrobenzyl) benzoxazole have been investigated experimentally and theoretically using Gaussian09 software package. Potential energy distribution of the normal modes of vibrations was done using GAR2PED program. The energy and oscillator strength calculated by time dependent density functional theory almost compliments with experimental findings. Gauge-including atomic orbital (1)H NMR chemical shifts calculations were carried out by using B3LYP functional with 6-31G basis set. The HOMO and LUMO analysis is used to determine the charge transfer within the molecule. The stability of the molecule arising from hyper-conjugative interaction and charge delocalization have been analyzed using NBO analysis. MEP was performed by the DFT method and the predicted infrared intensities and Raman activities have also been reported. The calculated geometrical parameters are in agreement with that of similar derivatives.

  14. Electronic [UV-Visible] and vibrational [FT-IR, FT-Raman] investigation and NMR-mass spectroscopic analysis of terephthalic acid using quantum Gaussian calculations.

    Science.gov (United States)

    Karthikeyan, N; Prince, J Joseph; Ramalingam, S; Periandy, S

    2015-03-15

    In this research work, the vibrational IR, polarization Raman, NMR and mass spectra of terephthalic acid (TA) were recorded. The observed fundamental peaks (IR, Raman) were assigned according to their distinctiveness region. The hybrid computational calculations were carried out for calculating geometrical and vibrational parameters by DFT (B3LYP and B3PW91) methods with 6-31++G(d,p) and 6-311++G(d,p) basis sets and the corresponding results were tabulated. The molecular mass spectral data related to base molecule and substitutional group of the compound was analyzed. The modification of the chemical property by the reaction mechanism of the injection of dicarboxylic group in the base molecule was investigated. The (13)C and (1)H NMR spectra were simulated by using the gauge independent atomic orbital (GIAO) method and the absolute chemical shifts related to TMS were compared with experimental spectra. The study on the electronic and optical properties; absorption wavelengths, excitation energy, dipole moment and frontier molecular orbital energies, were performed by hybrid Gaussian calculation methods. The orbital energies of different levels of HOMO and LUMO were calculated and the molecular orbital lobe overlapping showed the inter charge transformation between the base molecule and ligand group. From the frontier molecular orbitals (FMO), the possibility of electrophilic and nucleophilic hit also analyzed. The NLO activity of the title compound related to Polarizability and hyperpolarizability were also discussed. The present molecule was fragmented with respect to atomic mass and the mass variation depends on the substitutions have also been studied. Crown Copyright © 2014. Published by Elsevier B.V. All rights reserved.

  15. Quantum mechanical study and spectroscopic (FT-IR, FT-Raman, UV-Visible) study, potential energy surface scan, Fukui function analysis and HOMO-LUMO analysis of 3-tert-butyl-4-methoxyphenol by DFT methods.

    Science.gov (United States)

    Saravanan, S; Balachandran, V

    2014-09-15

    This study represents an integral approach towards understanding the electronic and structural aspects of 3-tert-butyl-4-methoxyphenol (TBMP). Fourier-transform Infrared (FT-IR) and Fourier-transform Raman (FT-Raman) spectra of TBMP was recorded in the region 4000-400 cm(-1) and 3500-100 cm(-1), respectively. The molecular structures, vibrational wavenumbers, infrared intensities and Raman activities were calculated using DFT (B3LYP and LSDA) methods using 6-311++G (d,p) basis set. The most stable conformer of TBMP was identified from the computational results. The assignments of vibrational spectra have been carried out with the help of normal co-ordinate analysis (NCA) following the scaled quantum mechanical force field (SQMFF) methodology. The first order hyperpolarizability (β0) and related properties (β, α0 and Δα) of TBMP have been discussed. The stability and charge delocalization of the molecule was studied by Natural Bond Orbital (NBO) analysis. UV-Visible spectrum and effects of solvents have been discussed and the electronic properties such as HOMO and LUMO energies were determined by time-dependent TD-DFT approach with B3LYP/6-311++G (d,p) level of theory. The molecule orbital contributions are studied by density of energy states (DOSs). The reactivity sites are identified by mapping the electron density into electrostatic potential surface (MEP). Mulliken analysis of atomic charges is also calculated. The thermodynamic properties at different temperatures were calculated, revealing the correlations between standard heat capacities, standard entropy and standard enthalpy changes with temperatures. Global hardness, global softness, global electrophilicity and ionization potential of the title compound are determined. Copyright © 2014 Elsevier B.V. All rights reserved.

  16. Experimental and theoretical (FT-IR, FT-Raman, UV-vis, NMR) spectroscopic analysis and first order hyperpolarizability studies of non-linear optical material: (2E)-3-[4-(methylsulfanyl) phenyl]-1-(4-nitrophenyl) prop-2-en-1-one using density functional theory.

    Science.gov (United States)

    Kumar, Amit; Deval, Vipin; Tandon, Poonam; Gupta, Archana; Deepak D'silva, E

    2014-09-15

    A combined experimental and theoretical investigation on FT-IR, FT-Raman, NMR, UV-vis spectra of a chalcone derivative (2E)-3-[4-(methylsulfanyl) phenyl]-1-(4-nitrophenyl) prop-2-en-1-one (4N4MSP) has been reported. 4N4MSP has two planar rings connected through conjugated double bond and it provides a necessary configuration to show non-linear optical (NLO) response. The molecular structure, fundamental vibrational frequencies and intensity of the vibrational bands are interpreted with the aid of structure optimizations and normal coordinate force field calculations based on density functional theory (DFT) with B3LYP functional and 6-311++G(d,p) basis set combination. The analysis of the fundamental modes was made with the help of potential energy distribution (PED). Molecular electrostatic potential (MEP) surface was plotted over the geometry primarily for predicting sites and relative reactivities towards electrophilic and nucleophilic attack. The delocalization of electron density of various constituents of the molecule has been discussed with the aid of NBO analysis. The electronic properties, such as excitation energies, oscillator strength, wavelengths, HOMO and LUMO energies, were calculated by time-dependent density functional theory (TD-DFT) and the results complement the experimental findings. The recorded and calculated 1H chemical shifts in gas phase and MeOD solution are gathered for reliable calculations of magnetic properties. Thermodynamic properties like heat capacity (C°p,m), entropy (S°m), enthalpy (H°m) have been calculated for the molecule at the different temperatures. Based on the finite-field approach, the non-linear optical (NLO) parameters such as dipole moment, mean polarizability, anisotropy of polarizability and first order hyperpolarizability of 4N4MSP molecule are calculated. The predicted first hyperpolarizability shows that the molecule has a reasonably good nonlinear optical (NLO) behavior.

  17. 1H NMR and FT-IR dataset based structural investigation of poly(amic acids and polyimides from 4,4′-diaminostilbene

    Directory of Open Access Journals (Sweden)

    Amit Kumar

    2016-06-01

    Full Text Available Structural investigation of polymers by various available analytical methods is important in order to correlate the structure with polymer properties for which understanding of polymer structure is very important factor. The data presented here in this article shows the 1H NMR spectra used for the characterization of prepared poly(amic acids (PAAs. It is often difficult to assigns the peak in NMR of polymers due to its complexity. Data presented here helps in assigning the proton peak in complex NMR of PAAs prepared from aromatic diamines. Further functionality in polymer chains can be confirmed by FT-IR spectra. Change in functionality during some reaction or process can be monitored by disappearance or appearance of peaks in FT-IR. The complete imidization of PAAs to Polyimides (PIs is difficult to analyze because of the chemical stability i.e. insolubility of PIs in most of the solvent therefore the completion of imidization process was confirmed using FTIR.

  18. Spectroscopic studies (FT-IR, FT-Raman, UV-Visible), normal co-ordinate analysis, first-order hyperpolarizability and HOMO, LUMO studies of 3,4-dichlorobenzophenone by using Density Functional Methods.

    Science.gov (United States)

    Venkata Prasad, K; Samatha, K; Jagadeeswara Rao, D; Santhamma, C; Muthu, S; Mark Heron, B

    2015-01-01

    The vibrational frequencies of 3,4-dichlorobenzophenone (DCLBP) were obtained from the FT-IR and Raman spectral data, and evaluated based on the Density Functional Theory using the standard method B3LYP with 6-311+G(d,p) as the basis set. On the basis of potential energy distribution together with the normal-co-ordinate analysis and following the scaled quantum mechanical force methodology, the assignments for the various frequencies were described. The values of the electric dipole moment (μ) and the first-order hyperpolarizability (β) of the molecule were computed. The UV-absorption spectrum was also recorded to study the electronic transitions. The calculated HOMO and LUMO energies show that charge transfer occurs within the molecule. The NBO analysis, to study the intramolecular hyperconjugative interactions, was carried out. Mulliken's net charges were evaluated. The MEP and thermodynamic properties were also calculated. The electron density-based local reactivity descriptor, such as Fukui functions, was calculated to explain the chemical selectivity or reactivity site in 3,4-dichlorobenzophenone. Copyright © 2015 Elsevier B.V. All rights reserved.

  19. NBO, NMR, UV, FT-IR, FT-Raman spectra and molecular structure (monomeric and dimeric structures) investigation of 4-Chloro-3,5-Xylenol: A combined experimental and theoretical study

    Science.gov (United States)

    Arivazhagan, M.; Gayathri, R.

    2013-12-01

    In this work, a joint experimental (FTIR and FT-Raman) and theoretical (DFT and ab initio) study on the structure and the vibrations of 4-Chloro-3,5-Xylenol (CXL) are compared and analyzed. CXL is a chlorinated phenolic antiseptic which is a bactericide against most gram-positive bacteria. The first hyperpolarizability (β0) of this novel molecular system and related non-linear properties of CXL are calculated using HF/6-311++G(d,p) method on the finite-field approach. The energy and oscillator strength calculated using absorption spectra (UV-Vis spectrum), this spectral analysis confirms the charge transfer of the molecule. The theoretical 13C nuclear magnetic resonance (NMR) chemical shifts of the molecule were calculated by Gauge Including Atomic Orbital (GIAO) method, to analyze the molecular environment as well as the delocalization activities of electron clouds. The directly calculated ionization potential (IP), electron affinity (EA), electronegativity (χ), chemical hardness (η), first electron excitation energy (τ) and electrophilicity index (ω) as well as local reactivity (S) analyzed using HOMO and LUMO energies; the energy band gap are also determined. NBO analysis shows that charge in electron density(ED) in the σ* and π* antibonding orbitals and E(2) energies confirms the occurrence of ICT (Intramolecular Charge Transfer) within the molecule. Inter molecular hydrogen bonds exist between -OH group, give the evidence for the formation of dimer entities in the title molecule. The influences of chlorine atom, hydroxyl group and methyl group on the geometry of benzene and its normal modes of vibrations (monomer and dimer of CXL) have also been discussed. Finally the calculated results were applied to simulate Infrared and Raman spectra of the title molecule which show good agreement with observed spectra.

  20. NBO, NMR, UV, FT-IR, FT-Raman spectra and molecular structure (monomeric and dimeric structures) investigation of 4-Chloro-3,5-Xylenol: a combined experimental and theoretical study.

    Science.gov (United States)

    Arivazhagan, M; Gayathri, R

    2013-12-01

    In this work, a joint experimental (FTIR and FT-Raman) and theoretical (DFT and ab initio) study on the structure and the vibrations of 4-Chloro-3,5-Xylenol (CXL) are compared and analyzed. CXL is a chlorinated phenolic antiseptic which is a bactericide against most gram-positive bacteria. The first hyperpolarizability (β0) of this novel molecular system and related non-linear properties of CXL are calculated using HF/6-311++G(d,p) method on the finite-field approach. The energy and oscillator strength calculated using absorption spectra (UV-Vis spectrum), this spectral analysis confirms the charge transfer of the molecule. The theoretical (13)C nuclear magnetic resonance (NMR) chemical shifts of the molecule were calculated by Gauge Including Atomic Orbital (GIAO) method, to analyze the molecular environment as well as the delocalization activities of electron clouds. The directly calculated ionization potential (IP), electron affinity (EA), electronegativity (χ), chemical hardness (η), first electron excitation energy (τ) and electrophilicity index (ω) as well as local reactivity (S) analyzed using HOMO and LUMO energies; the energy band gap are also determined. NBO analysis shows that charge in electron density(ED) in the σ(*) and π(*) antibonding orbitals and E((2)) energies confirms the occurrence of ICT (Intramolecular Charge Transfer) within the molecule. Inter molecular hydrogen bonds exist between -OH group, give the evidence for the formation of dimer entities in the title molecule. The influences of chlorine atom, hydroxyl group and methyl group on the geometry of benzene and its normal modes of vibrations (monomer and dimer of CXL) have also been discussed. Finally the calculated results were applied to simulate Infrared and Raman spectra of the title molecule which show good agreement with observed spectra.

  1. Vibrational investigation on FT-IR and FT-Raman spectra, IR intensity, Raman activity, peak resemblance, ideal estimation, standard deviation of computed frequencies analyses and electronic structure on 3-methyl-1,2-butadiene using HF and DFT (LSDA/B3LYP/B3PW91) calculations.

    Science.gov (United States)

    Ramalingam, S; Jayaprakash, A; Mohan, S; Karabacak, M

    2011-11-01

    FT-IR and FT-Raman (4000-100 cm(-1)) spectral measurements of 3-methyl-1,2-butadiene (3M12B) have been attempted in the present work. Ab-initio HF and DFT (LSDA/B3LYP/B3PW91) calculations have been performed giving energies, optimized structures, harmonic vibrational frequencies, IR intensities and Raman activities. Complete vibrational assignments on the observed spectra are made with vibrational frequencies obtained by HF and DFT (LSDA/B3LYP/B3PW91) at 6-31G(d,p) and 6-311G(d,p) basis sets. The results of the calculations have been used to simulate IR and Raman spectra for the molecule that showed good agreement with the observed spectra. The potential energy distribution (PED) corresponding to each of the observed frequencies are calculated which confirms the reliability and precision of the assignment and analysis of the vibrational fundamentals modes. The oscillation of vibrational frequencies of butadiene due to the couple of methyl group is also discussed. A study on the electronic properties such as HOMO and LUMO energies, were performed by time-dependent DFT (TD-DFT) approach. The calculated HOMO and LUMO energies show that charge transfer occurs within the molecule. The thermodynamic properties of the title compound at different temperatures reveal the correlations between standard heat capacities (C) standard entropies (S), and standard enthalpy changes (H).

  2. On the Traceability of Commercial Saffron Samples Using 1H-NMR and FT-IR Metabolomics

    Directory of Open Access Journals (Sweden)

    Roberto Consonni

    2016-02-01

    Full Text Available In previous works on authentic samples of saffron of known history (harvest and processing year, storage conditions, and length of time some biomarkers were proposed using both FT-IR and NMR metabolomics regarding the shelf life of the product. This work addresses the difficulties to trace back the “age” of commercial saffron samples of unknown history, sets a limit value above which these products can be considered substandard, and offers a useful tool to combat saffron mislabeling and fraud with low-quality saffron material. Investigations of authentic and commercial saffron samples of different origin and harvest year, which had been stored under controlled conditions for different lengths of time, allowed a clear-cut clustering of samples in two groups according to the storage period irrespectively of the provenience. In this respect, the four-year cut off point proposed in our previous work assisted to trace back the “age” of unknown samples and to check for possible mislabeling practices.

  3. FT-IR, FT-Raman, UV, NMR spectra, molecular structure, ESP, NBO and HOMO-LUMO investigation of 2-methylpyridine 1-oxide: a combined experimental and DFT study.

    Science.gov (United States)

    Shoba, D; Periandi, S; Boomadevi, S; Ramalingam, S; Fereyduni, E

    2014-01-24

    In this paper, the equilibrium geometry, bonding features, vibrational frequencies, (1)H and (13)C chemical shift values, molecular electrostatic potential maps, HOMO-LUMO energies and several thermodynamic parameters of title compound in the ground state have been calculated by using the density functional method with 6-31G(d,p) and 6-311G(d,p) basis sets. A detailed interpretation of the infrared and Raman spectra of 2-methylpyridine 1-oxide was reported. Furthermore, natural bond orbitals were performed in this work. The theoretical results showed an excellent agreement with the experimental values.

  4. 1H NMR and FT-IR dataset based structural investigation of poly(amic acid)s and polyimides from 4,4′-diaminostilbene

    Science.gov (United States)

    Kumar, Amit; Tateyama, Seiji; Yasaki, Katsuaki; Ali, Mohammad Asif; Takaya, Naoki; Singh, Rajeev; Kaneko, Tatsuo

    2016-01-01

    Structural investigation of polymers by various available analytical methods is important in order to correlate the structure with polymer properties for which understanding of polymer structure is very important factor. The data presented here in this article shows the 1H NMR spectra used for the characterization of prepared poly(amic acid)s (PAAs). It is often difficult to assigns the peak in NMR of polymers due to its complexity. Data presented here helps in assigning the proton peak in complex NMR of PAAs prepared from aromatic diamines. Further functionality in polymer chains can be confirmed by FT-IR spectra. Change in functionality during some reaction or process can be monitored by disappearance or appearance of peaks in FT-IR. The complete imidization of PAAs to Polyimides (PIs) is difficult to analyze because of the chemical stability i.e. insolubility of PIs in most of the solvent therefore the completion of imidization process was confirmed using FTIR. PMID:26933669

  5. Primidone--an antiepileptic drug--characterisation by quantum chemical and spectroscopic (FTIR, FT-Raman, 1H, 13C NMR and UV-Visible) investigations.

    Science.gov (United States)

    Arjunan, V; Santhanam, R; Subramanian, S; Mohan, S

    2013-05-15

    The solid phase FTIR and FT-Raman spectra of primidone were recorded in the regions 4000-400 cm(-1) and 4000-100 cm(-1), respectively. The vibrational spectra were analysed and the observed fundamentals were assigned and analysed. The experimental wavenumbers were compared with the theoretical scaled vibrational wavenumbers determined by DFT methods. The Raman intensities were also determined with B3LYP/6-31G(d,p) method. The total electron density and molecular electrostatic potential surface of the molecule were constructed by using B3LYP/6-311++G(d,p) method to display electrostatic potential (electron+nuclei) distribution. The HOMO and LUMO energies were measured. Natural bond orbital analysis of primidone has been performed to indicate the presence of intramolecular charge transfer. The (1)H and (13)C NMR spectra were recorded and the chemical shifts of the molecule were calculated. Copyright © 2013 Elsevier B.V. All rights reserved.

  6. Comprehensive quantum chemical and spectroscopic (FTIR, FT-Raman, 1H, 13C NMR) investigations of O-desmethyltramadol hydrochloride an active metabolite in tramadol - An analgesic drug

    Science.gov (United States)

    Arjunan, V.; Santhanam, R.; Marchewka, M. K.; Mohan, S.

    2014-03-01

    O-desmethyltramadol is one of the main metabolites of tramadol widely used clinically and has analgesic activity. The FTIR and FT-Raman spectra of O-desmethyl tramadol hydrochloride are recorded in the solid phase in the regions 4000-400 cm-1 and 4000-100 cm-1, respectively. The observed fundamentals are assigned to different normal modes of vibration. Theoretical studies have been performed as its hydrochloride salt. The structure of the compound has been optimised with B3LYP method using 6-31G** and cc-pVDZ basis sets. The optimised bond length and bond angles are correlated with the X-ray data. The experimental wavenumbers were compared with the scaled vibrational frequencies determined by DFT methods. The IR and Raman intensities are determined with B3LYP method using cc-pVDZ and 6-31G(d,p) basic sets. The total electron density and molecular electrostatic potential surfaces of the molecule are constructed by using B3LYP/cc-pVDZ method to display electrostatic potential (electron + nuclei) distribution. The electronic properties HOMO and LUMO energies were measured. Natural bond orbital analysis of O-desmethyltramadol hydrochloride has been performed to indicate the presence of intramolecular charge transfer. The 1H and 13C NMR chemical shifts of the molecule have been anlysed.

  7. Lignin analysis by FT-Raman spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Agarwal, U.P.; Obst, J.R.; Cannon, A.B. [USDA Forest Products Lab., Madison, WI (United States)

    1996-10-01

    Traditional methods of lignin analysis, such as Klason (acid insoluble) lignin determinations, give satisfactory results, are widely accepted, and often are considered as standard analyses. However, the Klason lignin method is laborious and time consuming; it also requires a fairly large-amount of isolated analyte. FT-Raman spectroscopy offers an opportunity to simplify and speed up lignin analyses. FT-Raman data for a number of hardwoods (angiosperms) and softwoods (gymnosperms) are compared with data obtained using other analytical methods, including Klason lignin (with corrections for acid soluble lignin), acetyl bromide, and FT-IR determinations. In addition, 10 different specimens of Nothofagus dombeyii (chosen because of the widely varying syringyl:guaiacyl monomer compositions of their lignins) were also analyzed. Lignin monomer compositions were determined by thioacidolysis of by nitrobenzene oxidation.

  8. FT-IR and 1H NMR studies of the state of solubilized water in water-in-oil microemulsions stabilized by mixtures of single- and double-tailed cationic surfactants.

    Science.gov (United States)

    Bumajdad, Ali; Madkour, Metwally; Shaaban, Ehab; El Seoud, Omar A

    2013-03-01

    The structure of solubilized water in water-in-n-heptane aggregates stabilized by mixtures of single- and double-tail quaternary ammonium surfactants, namely didodecyldimethylammonium chloride/dodecyltrimethylammonium chloride (DDAC/DTAC) or didodecyldimethylammonium bromide/dodecyltrimethylammonium bromide (DDAB/DTAB) was studied by two noninvasive techniques, (1)H NMR and FT-IR. In the former, the chemical shift data, δ(obs), were used to calculate the so-called deuterium/protium fractionation factor, φ(M), of the aggregate-solubilized water and were found to be unity. In the FT-IR study, upon increasing water/surfactant molar ratio, W, the frequency, ν(OD), of the HOD species decreases, while its full width at half height and its area increase. The results obtained from both techniques indicate that the water appears to be present as a single nano-phase and the structure varies continuously as a result of increasing W. In addition, the effect of changing the counter-ion (Br(-) or Cl(-)) on (1)H NMR and FT-IR results was investigated. In spite of the known difference in the dissociation of these counter-ions from micellar aggregates, this was found not to affect the state of solubilized water. This report gives further insight into the contradictory scientific debates on the structure of water in the polar nano-cores of microemulsions.

  9. Myowater dynamics and protein secondary structural changes as affected by heating rate in three pork qualities: a combined FT-IR microspectroscopic and 1H NMR relaxometry study.

    Science.gov (United States)

    Wu, Zhiyun; Bertram, Hanne Christine; Böcker, Ulrike; Ofstad, Ragni; Kohler, Achim

    2007-05-16

    The objective of this study was to investigate the influence of heating rate on myowater dynamics and protein secondary structures in three pork qualities by proton NMR T2 relaxation and Fourier transform infrared (FT-IR) microspectroscopy measurements. Two oven temperatures at 100 degrees C and 200 degrees C corresponding to slow and fast heating rates were applied on three pork qualities (DFD, PSE, and normal) to an internal center temperature of 65 degrees C. The fast heating induced a higher cooking loss, particularly for PSE meat. The water proton T21 distribution representing water entrapped within the myofibrillar network was influenced by heating rate and meat quality. Fast heating broadened the T21 distribution and decreased the relaxation times of the T21 peak position for three meat qualities. The changes in T21 relaxation times in meat can be interpreted in terms of chemical and diffusive exchange. FT-IR showed that fast heating caused a higher gain of random structures and aggregated beta-sheets at the expense of native alpha-helixes, and these changes dominate the fast-heating-induced broadening of T21 distribution and reduction in T21 times. Furthermore, of the three meat qualities, PSE meat had the broadest T21 distribution and the lowest T21 times for both heating rates, reflecting that the protein aggregation of PSE caused by heating is more extensive than those of DFD and normal, which is consistent with the IR data. The present study demonstrated that the changes in T2 relaxation times of water protons affected by heating rate and raw meat quality are well related to the protein secondary structural changes as probed by FT-IR microspectroscopy.

  10. FT-IR, UV-vis, 1H and 13C NMR spectra and the equilibrium structure of organic dye molecule disperse red 1 acrylate: a combined experimental and theoretical analysis.

    Science.gov (United States)

    Cinar, Mehmet; Coruh, Ali; Karabacak, Mehmet

    2011-12-01

    This study reports the characterization of disperse red 1 acrylate compound by spectral techniques and quantum chemical calculations. The spectroscopic properties were analyzed by FT-IR, UV-vis, (1)H NMR and (13)C NMR techniques. FT-IR spectrum in solid state was recorded in the region 4000-400 cm(-1). The UV-vis absorption spectrum of the compound that dissolved in methanol was recorded in the range of 200-800 nm. The (1)H and (13)C NMR spectra were recorded in CDCl(3) solution. The structural and spectroscopic data of the molecule in the ground state were calculated using density functional theory (DFT) employing B3LYP exchange correlation and the 6-311++G(d,p) basis set. The vibrational wavenumbers were calculated and scaled values were compared with experimental FT-IR spectrum. A satisfactory consistency between the experimental and theoretical spectra was obtained and it shows that the hybrid DFT method is very useful in predicting accurate vibrational structure, especially for high-frequency region. The complete assignments were performed on the basis of the experimental results and total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. Isotropic chemical shifts were calculated using the gauge-invariant atomic orbital (GIAO) method. A study on the electronic properties were performed by timedependent DFT (TD-DFT) and CIS(D) approach. To investigate non linear optical properties, the electric dipole moment μ, polarizability α, anisotropy of polarizability Δα and molecular first hyperpolarizability β were computed. The linear polarizabilities and first hyperpolarizabilities of the studied molecule indicate that the compound can be a good candidate of nonlinear optical materials.

  11. Synthesis, structural, spectral (FT-IR, 1H and 13C NMR and UV-Vis), NBO and first order hyperpolarizability analysis of N-(4-nitrophenyl)-2, 2-dibenzoylacetamide by density functional theory

    Science.gov (United States)

    Yalçın, Şerife Pınar; Ceylan, Ümit; Sarıoğlu, Ahmet Oral; Sönmez, Mehmet; Aygün, Muhittin

    2015-10-01

    The title compound, C22H16N2O5, was synthesized and characterized by experimental techniques (FT-IR, 1H NMR, 13C NMR, UV-Vis and X-Ray single crystal determination) and theoretical calculations. The molecular geometry, vibrational frequencies, molecular electrostatic potential (MEP), thermodynamic properties, the dipole moments, HOMO-LUMO energy has been calculated by using the Density Functional Theory (DFT) method with 6-311G(d,p) and 6-311++G(d,p) basis sets. 1H and 13C NMR chemical shifts show good agreement with experimental values. According to calculated results, the 6-311G(d,p) and 6-311++G(d,p) basis sets have showed similar results. The optimized geometry can well reproduce the crystal structure parameters.

  12. Synthesis, spectral (FT-IR, UV-visible, NMR) features, biological activity prediction and theoretical studies of 4-Amino-3-(4-hydroxybenzyl)-1H-1,2,4-triazole-5(4H)-thione and its tautomer

    Science.gov (United States)

    Srivastava, Ambrish Kumar; Kumar, Abhishek; Misra, Neeraj; Manjula, P. S.; Sarojini, B. K.; Narayana, B.

    2016-03-01

    Triazole compounds constitute an important class of organic chemistry due to their various biological and corrosion inhibition activities. The synthesis scheme of a new triazole compound namely, 4-Amino-3-(4-hydroxybenzyl)-1H-1,2,4-triazole-5(4H)-thione (4AHT) has been theoretically analyzed. Our density functional theory (DFT) based calculations show that the synthesis of 4AHT is energetically feasible at the room temperature as the reaction is exothermic, spontaneous as well as favored in forward direction. The calculated bond-lengths are found to be in good agreement with corresponding crystallographic values. We have considered two possible tautomers of 4AHT viz. thione and thiol forms. The FT-IR (KBr disc), UV-visible (ethanol) and 1H-NMR (DMSO) spectra of 4AHT have been recorded. The vibrational modes have been assigned on the basis of their potential energy distributions and scaled wavenumbers agree well with the FT-IR wavenumbers. Time dependent DFT calculations are performed to analyze the electronic transitions for various excited states which reproduce the experimental peak observed in UV-visible spectrum. Using gauge independent atomic orbital method 1H-NMR chemical shifts have been calculated and correlated with the experimental chemical shifts with the linear correlation coefficient of 0.9453. Our spectral analyses reveal the dominance of thione over thiol form of 4AHT. The chemical reactivity of 4AHT has been discussed by molecular electrostatic potential surface as well as various electronic parameters. The biological activities of 4AHT have also been explored theoretically and it has been found that the title molecule can act as a potential inhibitor of cyclin-dependent kinase 5 enzyme. These findings may guide the synthesis and design of new triazole compounds with interesting biological activity.

  13. Spectroscopic studies (FTIR, FT-Raman and UV-Visible), normal coordinate analysis, NBO analysis, first order hyper polarizability, HOMO and LUMO analysis of (1R)-N-(Prop-2-yn-1-yl)-2,3-dihydro-1H-inden-1-amine molecule by ab initio HF and density functional methods.

    Science.gov (United States)

    Muthu, S; Ramachandran, G

    2014-01-01

    The Fourier transform infrared (FT-IR) and FT-Raman of (1R)-N-(Prop-2-yn-1-yl)-2,3-dihydro-1H-inden-1-amine (1RNPDA) were recorded in the regions 4000-400 cm(-1) and 4000-100 cm(-1) respectively. A complete assignment and analysis of the fundamental vibrational modes of the molecule were carried out. The observed fundamental modes have been compared with the harmonic vibrational frequencies computed using HF method by employing 6-31G(d,p) basis set and DFT(B3LYP) method by employing 6-31G(d,p) basis set. The vibrational studies were interpreted in terms of Potential Energy Distribution (PED). The complete vibrational frequency assignments were made by Normal Co-ordinate Analysis (NCA) following the scaled quantum mechanical force field methodology (SQMFF). The first order hyper polarizability (β0) of this molecular system and related properties (α, μ, and Δα) are calculated using B3LYP/6-31G(d,p) method based on the finite-field approach. The thermodynamic functions of the title compound were also performed at the above methods and basis set. A detailed interpretation of the infrared and Raman spectra of 1RNPDA is reported. The (1)H and (13)C nuclear magnetic resonance (NMR) chemical shifts of the molecule were calculated using the GIAO method confirms with the experimental values. Stability of the molecule arising from hyper-conjugative interactions and charge delocalization has been analyzed using Natural Bond Orbital (NBO) analysis. UV-vis spectrum of the compound was recorded and electronic properties such as excitation energies, oscillator strength and wavelength were performed by TD-DFT/B3LYP using 6-31G(d,p) basis set. The HOMO and LUMO energy gap reveals that the energy gap reflects the chemical activity of the molecule. The observed and calculated wave numbers are formed to be in good agreement. The experimental spectra also coincide satisfactorily with those of theoretically constructed spectra. Copyright © 2013 Elsevier B.V. All rights reserved.

  14. FT-IR, HOMO-LUMO, NBO, MEP analysis and molecular docking study of 3-Methyl-4-{(E)-[4-(methylsulfanyl)-benzylidene]amino}1H-1,2,4-triazole-5(4H)-thione.

    Science.gov (United States)

    Panicker, C Yohannan; Varghese, Hema Tresa; Manjula, P S; Sarojini, B K; Narayana, B; War, Javeed Ahamad; Srivastava, S K; Van Alsenoy, C; Al-Saadi, Abdulaziz A

    2015-01-01

    FT-IR spectrum of 3-Methyl-4-{(E)-[4-(methylsulfanyl)-benzylidene]amino}1H-1,2,4-triazole-5(4H)-thione was recorded and analysed. The vibrational wavenumbers were computed and at HF and DFT levels of theory. The data obtained from wavenumber calculations are used to assign the vibrational bands obtained in the IR spectrum. The NH stretching wavenumber is red shifted in the IR spectrum from the computed value, which indicates the weakening of the NH bond. The geometrical parameters of the title compound are in agreement with the XRD results. NBO analysis, HOMO-LUMO, first and second order hyperpolarizability and molecular electrostatic potential results are also reported. From the MEP map it is evident that the negative regions are localized over the sulphur atoms and N3 atom of triazole ring and the maximum positive region is localized on NH group, indicating a possible site for nucleophilic attack. Prediction of Activity Spectra analysis of the title compound predicts anti-tuberculostic activity with probability to be active value of 0.543. Molecular docking studies reveal that the triazole nitrogen atoms and the thione sulphur atom play vital role in bonding and results draw us to the conclusion that the compound might exhibit anti-tuberculostic activity.

  15. Electron paramagnetic resonance and FT-IR spectroscopic studies of glycine anhydride and betaine hydrochloride

    Science.gov (United States)

    Halim Başkan, M.; Kartal, Zeki; Aydın, Murat

    2015-12-01

    Gamma irradiated powders of glycine anhydride and betaine hydrochloride have been investigated at room temperature by electron paramagnetic resonance (EPR). In these compounds, the observed paramagnetic species were attributed to the R1 and R2 radicals, respectively. It was determined that the free electron interacted with environmental protons and 14N nucleus in both radicals. The EPR spectra of gamma irradiated powder samples remained unchanged at room temperature for two weeks after irradiation. Also, the Fourier Transform Infrared (FT-IR), FT-Raman and thermal analyses of both compounds were investigated. The functional groups in the molecular structures of glycine anhydride and betaine hydrochloride were identified by vibrational spectroscopies (FT-IR and FT-Raman).

  16. Comprehensive quantum chemical and spectroscopic (FTIR, FT-Raman, 1H, 13C NMR) investigations of (1,2-epoxyethyl)benzene and (1,2-epoxy-2-phenyl)propane

    Science.gov (United States)

    Arjunan, V.; Anitha, R.; Devi, L.; Mohan, S.; Yang, Haifeng

    2015-01-01

    Aromatic epoxides are causative factors for mutagenic and carcinogenic activity of polycyclic arenes. The 1,2- or 2,3-epoxy compounds are widely used to a considerable extent in the textile, plastics, pharmaceutical, cosmetics, detergent and photochemical industries. The FTIR and FT-Raman spectra of (1,2-epoxyethyl)benzene and (1,2-epoxy-2-phenyl)propane are recorded in the regions 4000-400 cm-1 and 4000-100 cm-1, respectively. The observed fundamentals are assigned to different normal modes of vibration. The structure of the compound has been optimised with B3LYP method using 6-311++G** and cc-pVTZ basis sets. The IR and Raman intensities are determined. The total electron density and molecular electrostatic potential surfaces of the molecule are constructed by using B3LYP/6-311++G(d,p) method to display electrostatic potential (electron + nuclei) distribution. The electronic properties HOMO and LUMO energies were measured. Natural bond orbital analysis of the compounds has been performed to indicate the presence of intramolecular charge transfer. The 1H and 13C NMR chemical shifts of the molecules have been analysed.

  17. Detection of metanil yellow contamination in turmeric using FT-Raman and FT-IR spectroscopy

    Science.gov (United States)

    Turmeric is well known for its medicinal value and is often used in Asian cuisine. Economically motivated contamination of turmeric by chemicals such as metanil yellow has been repeatedly reported. Although traditional technologies can detect such contaminants in food, high operational costs and ope...

  18. FTIR, FT-Raman, FT-NMR, UV-visible and quantum chemical investigations of 2-amino-4-methylbenzothiazole.

    Science.gov (United States)

    Arjunan, V; Sakiladevi, S; Rani, T; Mythili, C V; Mohan, S

    2012-03-01

    The FT-IR (4000-400 cm(-1)) and FT-Raman (4000-100 cm(-1)) spectral measurements and complete assignments of the observed spectra of 2-amino-4-methylbenzothiazole (2A4MBT) have been proposed. Ab initio and DFT calculations have been performed and the structural parameters of the compound were determined from the optimised geometry with 6-31G(d,p), 6-311++G(d,p) and cc-pVDZ basis sets and giving energies, harmonic vibrational frequencies, depolarisation ratios, IR intensities and Raman activities. (1)H and (13)C NMR spectra were recorded and (1)H and (13)C nuclear magnetic resonance chemical shifts of the molecule were calculated using the gauge independent atomic orbital (GIAO) method. UV-visible spectrum of the compound was also recorded and the electronic properties, such as HOMO, LUMO and band gap energies were measured by time-dependent DFT (TD-DFT) approach. The geometric parameters, energies, harmonic vibrational frequencies, IR intensities, Raman activities chemical shifts and absorption wavelengths were compared with the available experimental data of the molecule. The influences of methyl and amino groups on the skeletal modes and on the proton chemical shifts have been investigated. Copyright © 2011 Elsevier B.V. All rights reserved.

  19. Synthesis, X-ray crystallography, spectroscopic (FT-IR, 1H &13C NMR and UV), computational (DFT/B3LYP) and enzymes inhibitory studies of 7-hydroximinocholest-5-en-3-ol acetate

    Science.gov (United States)

    Ahmad, Faheem; Parveen, Mehtab; Alam, Mahboob; Azaz, Shaista; Malla, Ali Mohammed; Alam, Mohammad Jane; Lee, Dong-Ung; Ahmad, Shabbir

    2016-07-01

    The present study reports the synthesis of 7-Hydroximinocholest-5-en-3-ol acetate (syn. 3β-acetoxycholest-5-en-7-one oxime; in general, steroidal oxime). The identity of steroidal molecule was confirmed by NMR, FT-IR, MS, CHN microanalysis and X-ray crystallography. DFT calculations on the titled molecule have been performed. The molecular structure and spectra interpreted by Gaussian hybrid computational analysis theory (B3LYP) are found to be in good correlation with the experimental data obtained from the various spectrophotometric techniques. The vibrational bands appearing in the FTIR are assigned with great accuracy using harmonic frequencies along with intensities and animated modes. Molecular properties like HOMO-LUMO analysis, chemical reactivity descriptors, MEP mapping, dipole moment and natural atomic charges have been presented at the same level of theory. Moreover, the Hirshfeld analysis was carried out to ascertain the secondary interactions and associated 2D fingerprint plots. The percentages of various interactions are pictorialized by fingerprint plots of Hirshfeld surface. Steroidal oxime exhibited promising inhibitory activity against acetylcholinesterase (AChE) as compared to the reference drug, tacrine. Molecular docking was performed to introduce steroidal molecules into the X-ray crystal structures of acetylcholinesterase at the active site to find out the probable binding mode. The results of molecular docking admitted that steroidal oxime may exhibit enzyme inhibitor activity.

  20. Quantitative gas analysis with FT-IR

    DEFF Research Database (Denmark)

    Bak, J.; Larsen, A.

    1995-01-01

    Calibration spectra of CO in the 2.38-5100 ppm concentration range (22 spectra) have been measured with a spectral resolution of 4 cm(-1), in the mid-IR (2186-2001 cm(-1)) region, with a Fourier transform infrared (FT-IR) instrument. The multivariate calibration method partial least-squares (PLS1...

  1. Rotating samples in FT-RAMAN spectrometers

    Science.gov (United States)

    De Paepe, A. T. G.; Dyke, J. M.; Hendra, P. J.; Langkilde, F. W.

    1997-11-01

    It is customary to rotate samples in Raman spectroscopy to avoid absorption or sample heating. In FT-Raman experiments the rotation is always shown (typically 30-60 rpm) because higher speeds are thought to generate noise in the spectra. In this article we show that more rapid rotation is possible. A tablet containing maleic acid and one made up of sub-millimetre silica particles with metoprolol succinate as active ingredient were rotated at different speeds, up to 6760 rpm. The FT-Raman spectra were recorded and studied. We conclude that it is perfectly acceptable to rotate samples up to 1500 rpm.

  2. FT-IR and FT-NIR Raman spectroscopy in biomedical research

    Science.gov (United States)

    Naumann, D.

    1998-06-01

    FT-IR and FT-NIR Raman spectra of intact microbial, plant animal or human cells, tissues, and body fluids are highly specific, fingerprint-like signatures which can be used to discriminate between diverse microbial species and strains, characterize growth-dependent phenomena and cell-drug interactions, and differentiate between various disease states. The spectral information potentially useful for biomedical characterizations may be distributed over the entire infrared region of the electromagnetic spectrum, i.e. over the near-, mid-, and far-infrared. It is therefore a key problem how the characteristic vibrational spectroscopic information can be systematically extracted from the infrared spectra of complex biological samples. In this report these questions are addressed by applying factor and cluster analysis treating the classification problem of microbial infrared spectra as a model task. Particularly interesting applications arise by means of a light microscope coupled to the FT-IR spectrometer. FT-IR spectra of single microcolonies of less than 40 μm in diameter can be obtained from colony replica applying a stamping technique that transfers the different, spatially separated microcolonies from the culture plate to a special IR-sample holder. Using a computer controlled x,y-stage together with mapping and video techniques, the fundamental tasks of microbiological analysis, namely detection, enumeration, and differentiation of micro-organisms can be integrated in one single apparatus. Since high quality, essentially fluorescence free Raman spectra may now be obtained in relatively short time intervals on previously intractable biological specimens, FT-IR and NIR-FT-Raman spectroscopy can be used in tandem to characterize biological samples. This approach seems to open up new horizons for biomedical characterizations of complex biological systems.

  3. Comparative study for separation of atmospheric humic-like substance (HULIS) by ENVI-18, HLB, XAD-8 and DEAE sorbents: elemental composition, FT-IR, 1H NMR and off-line thermochemolysis with tetramethylammonium hydroxide (TMAH).

    Science.gov (United States)

    Fan, Xingjun; Song, Jianzhong; Peng, Ping'an

    2013-11-01

    Humic-like substances (HULIS) are significant constituents of aerosols, and the isolation and characterization of HULIS by solid-phase extraction methods are dependent on the sorbents used. In this study, we used the following five methods: ENVI-18, HLB-M, HLB-N, XAD-8 and DEAE, to isolate atmospheric HULIS at an urban site. Then we conducted a comparative investigation of the HULIS chemical characteristics by means of elemental analysis, Fourier transform infrared spectroscopy, (1)H nuclear magnetic resonance spectroscopy and off-line thermochemolysis with tetramethylammonium hydroxide. The results indicate that HULIS isolated using different methods show many similarities in chemical composition and structure. Some differences were however also observed between the five isolated HULIS: HULISHLB-M contains a relatively high content of OCH group, compared to HULISENVI-18 and HULISXAD-8; HULISXAD-8 contains a relatively high content of hydrophobic and aromatic components, compared to HULISENVI-18 and HULISHLB-M; HULISDEAE contains the highest content of aromatic functional groups, as inferred by (1)H NMR spectra, but a great amount of salts generally present in the HULISDEAE and thereby limited the choices for characterizing the materials (i.e., elemental analysis and TMAH thermochemolysis); HULISHLB-N has relatively high levels of H and N, a high N/C atomic ratio, and includes N-containing functional groups, which suggests that it has been altered by 2% ammonia introduced in the eluents. In summary, we found that ENVI-18, HLB-M, and XAD-8 are preferable methods for isolation and characterization of HULIS in atmospheric aerosols. These results also suggest that caution is required when applying DEAE and HLB-N isolating methods for characterizing atmospheric HULIS.

  4. FT-Infrared and FT-Raman Spectroscopic Studies of Complexes (C5H5)2TiCl2,(C5H4Me)2TiCl2 and (C5HMe4)2TiCl2

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The FT-IR and FT-Raman spectra of complexes (C5H5)2TiC12( Ⅰ ), (C5H4Me)2TiCl2( Ⅱ )and (C5HMe4)2TiCl2( Ⅲ ) have been obtained and discussed. The FT-Raman spectral data provide some new vibrational information about complexes ( Ⅰ ), ( Ⅱ ) and ( Ⅲ ). The assignmentsof cyclopentadienyl vibrational modes and skeletal vibrational modes have been made.

  5. Evaluation of turmeric powder adulterated with metanil yellow using FT-Raman and FT-IR spectroscopy

    Science.gov (United States)

    Turmeric powder (Curcuma longa L.) is valued both for its medicinal properties and for its popular culinary use such as being a component in curry powder. Due to its high demand in international trade, turmeric powder has been subject to economically driven, hazardous chemical adulteration. This stu...

  6. Structure and vibrational spectra of melaminium bis(trifluoroacetate) trihydrate: FT-IR, FT-Raman and quantum chemical calculations.

    Science.gov (United States)

    Sangeetha, V; Govindarajan, M; Kanagathara, N; Marchewka, M K; Gunasekaran, S; Anbalagan, G

    2014-05-05

    Melaminium bis(trifluoroacetate) trihydrate (MTFA), an organic material has been synthesized and single crystals of MTFA have been grown by the slow solvent evaporation method at room temperature. X-ray powder diffraction analysis confirms that MTFA crystal belongs to the monoclinic system with space group P2/c. The molecular geometry, vibrational frequencies and intensity of the vibrational bands have been interpreted with the aid of structure optimization based on density functional theory (DFT) B3LYP method with 6-311G(d,p) and 6-311++G(d,p) basis sets. The X-ray diffraction data have been compared with the data of optimized molecular structure. The theoretical results show that the crystal structure can be reproduced by optimized geometry and the vibrational frequencies show good agreement with the experimental values. The nuclear magnetic resonance (NMR) chemical shift of the molecule has been calculated by the gauge independent atomic orbital (GIAO) method and compared with experimental results. HOMO-LUMO, and other related molecular and electronic properties are calculated. The Mulliken and NBO charges have also been calculated and interpreted.

  7. Experimental and DFT studies on the vibrational spectra of 1H-indene-2-boronic acid

    Science.gov (United States)

    Alver, Özgur; Kaya, Mehmet Fatih

    2014-11-01

    Stable conformers and geometrical molecular structures of 1H-indene-2-boronic acid (I-2B(OH)2) were studied experimentally and theoretically using FT-IR and FT-Raman spectroscopic methods. FT-IR and FT-Raman spectra were recorded in the region of 4000-400 cm-1, and 3700-400 cm-1, respectively. The optimized geometric structures were searched by Becke-3-Lee-Yang-Parr (B3LYP) hybrid density functional theory method with 6-31++G(d,p) basis set. Vibrational wavenumbers of I-2B(OH)2 were calculated using B3LYP density functional methods including 6-31++G(d,p) basis set. Experimental and theoretical results show that density functional B3LYP method gives satisfactory results for predicting vibrational wavenumbers except OH stretching modes which is probably due to increasing unharmonicity in the high wave number region and possible intra and inter molecular interaction at OH edges. To support the assigned vibrational wavenumbers, the potential energy distribution (PED) values were also calculated using VEDA 4 (Vibrational Energy Distribution Analysis) program.

  8. Solvent effect in implicit/explicit model on FT-IR, 1H, 13C and 19F NMR, UV-vis and fluorescence spectra, linear, second- and third-nonlinear optical parameters of 2-(trifluoromethyl)benzoic acid: Experimental and computational study

    Science.gov (United States)

    Avcı, Davut; Altürk, Sümeyye; Tamer, Ömer; Kuşbazoğlu, Mustafa; Atalay, Yusuf

    2017-09-01

    FT-IR, 1H, 13C and 19F NMR, UV-vis and fluorescence spectra for 2-(trifluoromethyl)benzoic acid (2-TFMBA) were recorded. DFT//B3LYP/6-31++G(d,p) calculations were used to determine the optimized molecular geometry, vibrational frequencies, 1H, 13C and 19F GIAO-NMR chemical shifts of 2-TFMBA. The detailed assignments of vibrational frequencies were carried out on the basis of potential energy distribution (PED) by using VEDA program. TD-DFT/B3LYP/6-31++G(d,p) calculations with the PCM (polarizable continuum model) in ethanol and DMSO solvents based on implicit/explicit model and gas phase in the excited state were employed to investigate UV-vis absorption and fluorescence emission wavelengths. The UV-vis and emission spectra were given in ethanol and DMSO solvents, and the major contributions to the electronic transitions were obtained. In addition, the NLO parameters (β, γ and χ(3)) and frontier molecular orbital energies of 2-TFMBA were calculated by using B3LYP/6-31++G(d,p) level. The NLO parameters of 2-TFMBA were compared with that of para-Nitroaniline (pNA) and urea which are the typical NLO materials. The refractive index (n) is calculated by using the Lorentz-Lorenz equation to observe polarization behavior of 2-TFMBA in DMSO and ethanol solvents. In order to investigate intramolecular and hydrogen bonding interactions, NBO calculations were also performed by the same level. To sum up, considering the well-known biological role, photochemical properties of 2-TFMBA were discussed.

  9. Vibrational and structural observations upon 3-((1H-benzo[d]imidazol-1-yl)methyl)naphthalen-2-ol from spectral and DFT computing approaches

    Science.gov (United States)

    Jone Pradeepa, S.; Tamilvendan, D.; Susai Boobalan, Maria; Sundaraganesan, N.

    2016-05-01

    An aggregate of experimental and computational study on synthesis, molecular structure, vibrational, electronic, nuclear magnetic resonance spectra, electronic structure, NLO activity and thermochemical characterization has been investigated for 3-((1H-benzo[d]imidazol-1-yl)methyl) naphthalen-2-ol (BDMN). The perspective on structural analysis includes the examination of equilibrium geometry, Natural Bond Orbital analysis (NBO), molecular electrostatic potential (MEP) analysis and frontier molecular orbital calculation. Similarly the following spectral analysis such as vibrational (FT-IR and FT-Raman), electronic (UV-Vis) and NMR (1H and 13C) has been interpreted. The FT-IR, FT-Raman spectrum were recorded in the frequency range of 4000-400 cm-1 and 4000-50 cm-1 respectively. A complete potential energy distribution (PED) was achieved to interpret the normal modes by comparing the experimental and theoretical spectral data. The simulation of NMR spectrum was performed using GIAO strategy. The NLO activity of BDMN has been calibrated using hyperpolarizability. In addition, various thermodynamic entities were predicted against different temperatures. The entire computation was executed using appropriate model chemistries such as B3LYP/Sadlej pVTZ, B3LYP/6-311G(d,p) and PBEPBE (TDDFT)/6-311G(d,p) for the respective properties. The overall hand-in-hand analysis by using both theoretical and experimental calculation on BDMN provides interesting observations and inferences.

  10. Characterization of Momordica charantia Ussing FT-IR Spectroscopy

    Directory of Open Access Journals (Sweden)

    Attila Keseru

    2016-11-01

    In this paper, because earlier claim shows that the plant used as stomachic, carminative, tonic, antipyretic, antidiabetic, in rheumatoid arthritis and gout, the present investigation was carried to characterized a principal components of plant using FT-IR technique

  11. FT-IR and Raman spectra and vibrational investigation of bis (4-acetylanilinium) hexachlorostannate using DFT (B3LYP) calculation

    Science.gov (United States)

    Tarchouna, S.; Chaabane, I.; Rahaiem, A. Ben

    2016-09-01

    4-acetylanilinium was used as a ligand for the synthesis of the organic/inorganic compound bis (4-acetylanilinium) hexachlorostannate. Vibrational study in the solid state was performed by FT-Raman of the free 4-acetylanilinium ligand C8H9ON+ and by FT-IR and FT-Raman spectroscopies of the [C8H10NO]2 SnCl6 compound. The comparative analysis of the Raman spectra of the title compound with that of the free ligand was discussed. The structure of the [C8H10NO]2SnCl6 was optimized by density functional theory (DFT) using B3LYP method and shows that the calculated values obtained by B3LYP/LanL2DZ basis are in a better agreement with the experimental data reported by Song et al. (2011) [1] than those obtained by B3LYP/LanL2MB basis. The vibrational frequencies are calculated using density functional theory (DFT) with the B3LYP/LanL2DZ basis, and scaled by various factors. Root mean square (RMS) value was calculated and the small difference between experimental and calculated modes has been interpreted by intermolecular interactions in the crystal.

  12. FT-Raman and FT-Infrared investigations of archaeological artefacts from Foeni Neolithic site (Banat, Romania

    Directory of Open Access Journals (Sweden)

    Simona Cîntă Pînzaru

    2008-08-01

    Full Text Available An impressive collection of chert artefacts from the Foeni Neolithic archaeological site (Timiş County, Banat region, Romania is hosted by the Banat Museum in Timişoara. A representative set of seven specimens was non-destructively investigated using FT-Raman and ATR-FT-IR spectroscopy. The research was carried out for checking if these readily-available, non-destructive, fast, and cheap methods, which do not require preliminary sample preparation could provide significant information for characterizing the mineral composition of chert artefacts. Based on vibrational data, it was confirmed that the raw material was represented by microcrystalline quartz and moganite, with local concentrations of accessory minerals (calcite, dolomite, and clay minerals. In spite of their wide macroscopic heterogeneity (colour, transparency, based on single point FT-Raman measurements the chert artefacts could not be assigned to distinctive groups of raw silica materials, in order to provide specific arguments for provenance studies. However, the presence of specific accessory minerals (dolomite, illite pointed to distinctive genetic conditions in the case of one lithic material. Sets of measurements (mapping are required for statistically characterizing each artefact specimen. IR data were less significant, due to the rough surface texture of the specimens in contact with the ZnSe crystal of the ATR-FT-IR module. However, illite was identified based solely on its contribution to the IR spectrum. This pioneering study on chert artefacts from Romania based on optical spectroscopic methods shows that there are good premises for a systematic investigation of highly-valuable museum collections, in particular in terms of chert geology.

  13. FT-Raman spectroscopy study of human breast tissue

    Science.gov (United States)

    Bitar Carter, Renata A.; Martin, Airton A.; Netto, Mario M.; Soares, Fernando A.

    2004-07-01

    Optical spectroscopy has been extensively studied as a potential in vivo diagnostic tool to provide information about the chemical and morphologic structure of tissue. Raman Spectroscpy is an inelastic scattering process that can provide a wealth of spectral features that can be related to the specific molecular structure of the sample. This article reports results of an in vitro study of the FT-Raman human breast tissue spectra. An Nd:YAG laser at 1064nm was used as the excitation source in the FT-Raman Spectrometer. The neoplastic human breast samples, both Fibroadenoma and ICD, were obtained during therapeutical routine medical procedures required by the primary disease, and the non-diseased human tissue was obtained in plastic surgery. No sample preparation was needed for the FT-Raman spectra collection. The FT-Raman spectra were recorded from normal, benign (Fibroadenomas) and malignant (IDC-Intraductal Carcinoma) samples, adding up 51 different areas. The main spectral differences of a typical FT-Raman spectra of a Normal (Non-diseased), Fibroadenoma, and Infiltrating Ductal Carcinoma (IDC) breast tissue at the interval of 600 to 1800cm-1, which may differentiate diagnostically the sample, were found in the bands of 1230 to 1295cm-1, 1440 to 1460 cm-1 and 1650 to 1680 cm-1, assigned to the vibrational bands of the carbohydrate-amide III, proteins and lipids, and carbohydrate-amide I, respectively.

  14. Vibrational microspectroscopy of food. Raman vs. FT-IR

    DEFF Research Database (Denmark)

    Thygesen, Lisbeth Garbrecht; Løkke, Mette Marie; Micklander, Elisabeth

    2003-01-01

    FT-IR and Raman spectroscopy are complementary techniques for the study of molecular vibrations and structure. The combination with a microscope results in an analytical method that allows spatially resolved investigation of the chemical composition of heterogeneous foods and food ingredients....... The high spatial resolution makes it possible to study areas down to approximately 10x10 mum with FT-IR microspectroscopy and approximately 1 x 1 mum with Raman microspectroscopy. This presentation highlights the advantages and disadvantages of the two microspectroscopic techniques when applied...... to different heterogeneous food systems. FT-IR and Raman microspectroscopy were applied to a number of different problems related to food analysis: (1) in situ determination of starch and pectin in the potato cell, (2) in situ determination of the distribution of amygdalin in bitter almonds, (3...

  15. Authenticity study of Phyllanthus species by NMR and FT-IR techniques coupled with chemometric methods

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Maiara S.; Pereira-Filho, Edenir R.; Ferreira, Antonio G. [Universidade Federal de Sao Carlos (UFSCAR), SP (Brazil). Dept. de Quimica; Boffo, Elisangela F. [Universidade Federal da Bahia (UFBA), Salvador, BA (Brazil). Inst. de Quimica; Figueira, Glyn M., E-mail: maiarassantos@yahoo.com.br [Universidade Estadual de Campinas (UNICAMP), Campinas, SP (Brazil). Centro Pluridisciplinar de Pesquisas Quimicas, Biologicas e Agricolas

    2012-07-01

    The importance of medicinal plants and their use in industrial applications is increasing worldwide, especially in Brazil. Phyllanthus species, popularly known as 'quebra-pedras' in Brazil, are used in folk medicine for treating urinary infections and renal calculus. This paper reports an authenticity study, based on herbal drugs from Phyllanthus species, involving commercial and authentic samples using spectroscopic techniques: FT-IR, {sup 1}H HR-MAS NMR and {sup 1}H NMR in solution, combined with chemometric analysis. The spectroscopic techniques evaluated, coupled with chemometric methods, have great potential in the investigation of complex matrices. Furthermore, several metabolites were identified by the NMR techniques. (author)

  16. Raman and FT-IR studies of ocular tissues

    Science.gov (United States)

    Ozaki, Yukihiro; Mizuno, Aritake

    1991-05-01

    Two examples of Raman and FT-IR studies of the ocular tissues are reviewed in this paper. The first example treats Raman studies on cataract development cataract-related lens hydration and structural changes in the lens proteins monitored in situ by Raman spectroscopy are described. The second example is concerned with FT-IR studies on the ocular tissues contain ing collagen nondestructive identification of Type I and IV collagen in the tissues and their structural differences elucidated by infrared spectroscopy are discussed. 1 .

  17. Vibrational spectroscopic, 1H NMR and quantum chemical computational study of 4-hydroxy-2-oxo-1,2-dihydroquinoline-8-carboxylic acid.

    Science.gov (United States)

    Ulahannan, Rajeev T; Panicker, C Yohannan; Varghese, Hema Tresa; Van Alsenoy, C; Musiol, Robert; Jampilek, Josef; Anto, P L

    2014-01-01

    FT-IR, FT-Raman and (1)H NMR spectra of 4-hydroxy-2-oxo-1,2-dihydroquinoline-8-carboxylic acid were recorded and obtained data were confronted with the computed using Gaussian09 software package. DFT/B3LYP, B3PW91 calculations have been done using 6-31G* and SDD basis sets, to investigate the vibrational frequencies and geometrical parameters. The assignments of the normal modes are done by potential energy distribution (PED) calculations. The calculated first hyperpolarizability is comparable with the reported values of similar quinoline derivatives and is an attractive object for future studies of non-linear optics. The stability of the molecule arising from hyperconjugative interaction and charge delocalization has been analyzed using NBO analysis. MEP predicts the most reactive part in the molecule. The calculated (1)H NMR results are in good agreement with experimental data.

  18. Determination of cellulose I crystallinity by FT-Raman spectroscopy

    Science.gov (United States)

    Umesh P. Agarwal; Richard S. Reiner; Sally A. Ralph

    2009-01-01

    Two new methods based on FT-Raman spectroscopy, one simple, based on band intensity ratio, and the other, using a partial least-squares (PLS) regression model, are proposed to determine cellulose I crystallinity. In the simple method, crystallinity in semicrystalline cellulose I samples was determined based on univariate regression that was first developed using the...

  19. FT-IR Microspectroscopy of Rat Ear Cartilage.

    Directory of Open Access Journals (Sweden)

    Benedicto de Campos Vidal

    Full Text Available Rat ear cartilage was studied using Fourier transform-infrared (FT-IR microspectroscopy to expand the current knowledge which has been established for relatively more complex cartilage types. Comparison of the FT-IR spectra of the ear cartilage extracellular matrix (ECM with published data on articular cartilage, collagen II and 4-chondroitin-sulfate standards, as well as of collagen type I-containing dermal collagen bundles (CBs with collagen type II, was performed. Ear cartilage ECM glycosaminoglycans (GAGs were revealed histochemically and as a reduction in ECM FT-IR spectral band heights (1140-820 cm-1 after testicular hyaluronidase digestion. Although ear cartilage is less complex than articular cartilage, it contains ECM components with a macromolecular orientation as revealed using polarization microscopy. Collagen type II and GAGs, which play a structural role in the stereo-arrangement of the ear cartilage, contribute to its FT-IR spectrum. Similar to articular cartilage, ear cartilage showed that proteoglycans add a contribution to the collagen amide I spectral region, a finding that does not recommend this region for collagen type II quantification purposes. In contrast to articular cartilage, the symmetric stretching vibration of -SO3- groups at 1064 cm-1 appeared under-represented in the FT-IR spectral profile of ear cartilage. Because the band corresponding to the asymmetric stretching vibration of -SO3- groups (1236-1225 cm-1 overlapped with that of amide III bands, it is not recommended for evaluation of the -SO3- contribution to the FT-IR spectrum of the ear cartilage ECM. Instead, a peak (or shoulder at 1027-1016 cm-1 could be better considered for this intent. Amide I/amide II ratios as calculated here and data from the literature suggest that protein complexes of the ear cartilage ECM are arranged with a lower helical conformation compared to pure collagen II. The present results could motivate further studies on this tissue

  20. FT-IR Microspectroscopy of Rat Ear Cartilage.

    Science.gov (United States)

    Vidal, Benedicto de Campos; Mello, Maria Luiza S

    2016-01-01

    Rat ear cartilage was studied using Fourier transform-infrared (FT-IR) microspectroscopy to expand the current knowledge which has been established for relatively more complex cartilage types. Comparison of the FT-IR spectra of the ear cartilage extracellular matrix (ECM) with published data on articular cartilage, collagen II and 4-chondroitin-sulfate standards, as well as of collagen type I-containing dermal collagen bundles (CBs) with collagen type II, was performed. Ear cartilage ECM glycosaminoglycans (GAGs) were revealed histochemically and as a reduction in ECM FT-IR spectral band heights (1140-820 cm-1) after testicular hyaluronidase digestion. Although ear cartilage is less complex than articular cartilage, it contains ECM components with a macromolecular orientation as revealed using polarization microscopy. Collagen type II and GAGs, which play a structural role in the stereo-arrangement of the ear cartilage, contribute to its FT-IR spectrum. Similar to articular cartilage, ear cartilage showed that proteoglycans add a contribution to the collagen amide I spectral region, a finding that does not recommend this region for collagen type II quantification purposes. In contrast to articular cartilage, the symmetric stretching vibration of -SO3- groups at 1064 cm-1 appeared under-represented in the FT-IR spectral profile of ear cartilage. Because the band corresponding to the asymmetric stretching vibration of -SO3- groups (1236-1225 cm-1) overlapped with that of amide III bands, it is not recommended for evaluation of the -SO3- contribution to the FT-IR spectrum of the ear cartilage ECM. Instead, a peak (or shoulder) at 1027-1016 cm-1 could be better considered for this intent. Amide I/amide II ratios as calculated here and data from the literature suggest that protein complexes of the ear cartilage ECM are arranged with a lower helical conformation compared to pure collagen II. The present results could motivate further studies on this tissue under

  1. Applications of FT-IR spectrophotometry in cancer diagnostics.

    Science.gov (United States)

    Bunaciu, Andrei A; Hoang, Vu Dang; Aboul-Enein, Hassan Y

    2015-01-01

    This review provides a brief background to the application of infrared spectroscopy, including Fourier transform-infrared spectroscopy, in biological fluids. It is not meant to be complete or exhaustive but to provide the reader with sufficient background for selected applications in cancer diagnostics. Fourier transform-infrared spectroscopy (FT-IR) is a fast and nondestructive analytical method. The infrared spectrum of a mixture serves as the basis to quantitate its constituents, and a number of common clinical chemistry tests have proven to be feasible using this approach. This review focuses on biomedical FT-IR applications, published in the period 2009-2013, used for early detection of cancer through qualitative and quantitative analysis.

  2. Results obtained by investigating saffron ussing FT-IR spectroscopy

    Directory of Open Access Journals (Sweden)

    Luisa Andronie

    2016-11-01

    Full Text Available The biological activity and the pharmaceutical properties of plants are strongly dependent on their structure. The FT-IR spectra of saffron (commercial have been obtained. The vibrational fundamentals from the IR spectrum, were analyzed  and assigned acoording to the available literature. In the present research work the genus saffron is selected because it is famous in wold as foods and also as medicine.

  3. Fourier Transform Infrared Spectroscopy: Part II. Advantages of FT-IR.

    Science.gov (United States)

    Perkins, W. D.

    1987-01-01

    This is Part II in a series on Fourier transform infrared spectroscopy (FT-IR). Described are various advantages of FT-IR spectroscopy including energy advantages, wavenumber accuracy, constant resolution, polarization effects, and stepping at grating changes. (RH)

  4. Poly-3-hydroxy butyric acid interaction with the transgenic flax fibers: FT-IR and Raman spectra of the composite extracted from a GM flax

    Science.gov (United States)

    Wróbel-Kwiatkowska, Magdalena; Żuk, Magdalena; Szopa, Jan; Dymińska, Lucyna; Mączka, Mirosław; Hanuza, Jerzy

    2009-07-01

    The FT-IR and FT-Raman studies have been performed on commercial 3-hydroxy-butyric acid, commercial poly-3-hydroxy butyric acid as well as poly-3-hydroxy butyric acid (PHB) produced by bacteria. The data were compared to those obtained for poly-3-hydroxy butyric acid extracted from natural and genetically modified flax. Genetically modified flax was generated by expression of three bacterial genes coding for synthesis of poly-3-hydroxy butyric acid. Thus transgenic flaxes were enhanced with different amount of the PHB. The discussion of polymer structure and vibrational properties has been done in order to get insight into differences among these materials. The interaction between the cellulose of flax fibers and embedded poly-3-hydroxybutyric acid has been also discussed. The spectroscopic data provide evidences for structural changes in cellulose and in PHB when synthesized in fibers. Based on this data it is suggesting that cellulose and PHB interact by hydrogen and ester bonds.

  5. Fourier Transform Infrared (FT-IR) Spectroscopy of Atmospheric Trace Gases HCl, NO and SO2

    Science.gov (United States)

    Haridass, C.; Aw-Musse, A.; Dowdye, E.; Bandyopadhyay, C.; Misra, P.; Okabe, H.

    1998-01-01

    Fourier Transform Infrared (FT-IR) spectral data have been recorded in the spectral region 400-4000/cm of hydrogen chloride and sulfur dioxide with I/cm resolution and of nitric oxide with 0.25 cm-i resolution, under quasi-static conditions, when the sample gas was passed through tubings of aluminum, copper, stainless steel and teflon. The absorbance was measured for the rotational lines of the fundamental bands of (1)H(35)Cl and (1)H(37)Cl for pressures in the range 100-1000 Torr and for the (14)N(16)O molecule in the range 100-300 Torr. The absorbance was also measured for individual rotational lines corresponding to the three modes of vibrations (upsilon(sub 1) - symmetric stretch, upsilon(sub 2) - symmetric bend, upsilon(sub 3) - anti-symmetric stretch) of the SO2 molecule in the pressure range 25-150 Torr. A graph of absorbance versus pressure was plotted for the observed rotational transitions of the three atmospherically significant molecules, and it was found that the absorbance was linearly proportional to the pressure range chosen, thereby validating Beer's law. The absorption cross-sections were determined from the graphical slopes for each rotational transition recorded for the HCl, NO and SO2 species. Qualitative and quantitative spectral changes in the FT-IR data will be discussed to identify and characterize various tubing materials with respect to their absorption features.

  6. Molecular structure (monomeric and dimeric) and hydrogen bonds in 5-benzyl 2-thiohydantoin studied by FT-IR and FT-Raman spectroscopy and DFT calculations.

    Science.gov (United States)

    Deval, Vipin; Kumar, Amit; Gupta, Vineet; Sharma, Anamika; Gupta, Archana; Tandon, Poonam; Kunimoto, Ko-Ki

    2014-11-11

    In the present work the structural and spectral characteristics of 5-benzyl-2-thiohydantoin (5-BTH) have been studied by methods of infrared, Raman spectroscopy and quantum chemistry. Electrostatic potential surface, optimized geometry, harmonic vibrational frequencies, infrared intensities and activities of Raman scattering were calculated by density functional theory (DFT) employing B3LYP with complete relaxation in the potential energy surface using 6-311G++(d,p) basis set. Our results support the hydrogen bonding pattern proposed by reported crystalline structure. Stability of the molecule arising from hyperconjugative interactions, charge delocalization have been analyzed using natural bond orbital (NBO) analysis. The 13C nuclear magnetic resonance (NMR) chemical shifts of the molecule are calculated by the gauge independent atomic orbital (GIAO) method and compared with experimental results. UV-vis spectrum of the compound was recorded in methanol solvent. The TD-DFT calculations have been performed to explore the influence of electronic absorption spectra in the gas phase, as well as in solution environment using PCM and 6-311++G(d,p) basis set. In addition, the thermodynamic properties of the compound were calculated at different temperatures and corresponding relations between the properties and temperature were also studied.

  7. FT-IR and FT-Raman spectra, molecular structure and first-order molecular hyperpolarizabilities of a potential antihistaminic drug, cyproheptadine HCl

    Science.gov (United States)

    Sagdinc, Seda G.; Erdas, Dilek; Gunduz, Ilknur; Sahinturk, Ayse Erbay

    2015-01-01

    Cyproheptadine hydrochloride (CYP HCl) {4-(5H-dibenzo[a,d]-cyclohepten-5-ylidene)-1-methylpiperidine hydrochloride} is a first-generation antihistamine with additional anticholinergic, antiserotonergic, and local-anesthetic properties. The geometry optimization, Mulliken atomic charges and wavenumber and intensity of the vibrational bands of all of the possible modes of CYP HCl have been calculated using ab initio Hartree-Fock (HF) and density functional theory (DFT) employing the B3LYP functional with the 6-311G(d,p) basis set. We have compared the calculated IR and Raman wavenumbers with experimental data. Quantum-chemical calculations of the geometrical structure, energies, and molecular electrostatic potential and NBO analysis of CYP HCl have been performed using the B3LYP/6-311G(d,p) method. The electric dipole moment (μ), static polarizability (α) and the first hyperpolarizability (β) values of the title compound have been computed using HF and DFT methods. The study reveals that the antihistaminic pharmacological property of CYP HCl has a large β value and, hence, may in general have potential applications in the development of non-linear optical materials. The experimental and calculated results for CYP HCl have also been compared with those for mianserin HCl.

  8. FT-IR and FT-Raman spectra, molecular structure and first-order molecular hyperpolarizabilities of a potential antihistaminic drug, cyproheptadine HCl.

    Science.gov (United States)

    Sagdinc, Seda G; Erdas, Dilek; Gunduz, Ilknur; Sahinturk, Ayse Erbay

    2015-01-05

    Cyproheptadine hydrochloride (CYP HCl) {4-(5H-dibenzo[a,d]-cyclohepten-5-ylidene)-1-methylpiperidine hydrochloride} is a first-generation antihistamine with additional anticholinergic, antiserotonergic, and local-anesthetic properties. The geometry optimization, Mulliken atomic charges and wavenumber and intensity of the vibrational bands of all of the possible modes of CYP HCl have been calculated using ab initio Hartree-Fock (HF) and density functional theory (DFT) employing the B3LYP functional with the 6-311G(d,p) basis set. We have compared the calculated IR and Raman wavenumbers with experimental data. Quantum-chemical calculations of the geometrical structure, energies, and molecular electrostatic potential and NBO analysis of CYP HCl have been performed using the B3LYP/6-311G(d,p) method. The electric dipole moment (μ), static polarizability (α) and the first hyperpolarizability (β) values of the title compound have been computed using HF and DFT methods. The study reveals that the antihistaminic pharmacological property of CYP HCl has a large β value and, hence, may in general have potential applications in the development of non-linear optical materials. The experimental and calculated results for CYP HCl have also been compared with those for mianserin HCl. Copyright © 2014 Elsevier B.V. All rights reserved.

  9. FT-Raman and FT-IR vibrational spectroscopic studies of Sr{sub 2}RESbO{sub 6} (RE = La to Lu and Y) double perovskites

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez-Martinez, F.; Montero, J.L.; Carrillo, I. [Departamento de Quimica Industrial y Polimeros, EUITI, Universidad Politecnica de Madrid, 28012 Madrid (Spain); Colon, C., E-mail: cristobal.colon@upm.es [Departamento Fisica Aplicada, EUITI, Universidad Politecnica de Madrid, 28012 Madrid (Spain)

    2012-10-15

    Highlights: Black-Right-Pointing-Pointer 14 double perovskites Sr{sub 2}RESbO{sub 6} were synthesized. Black-Right-Pointing-Pointer Crystal lattice parameters have been obtained. Black-Right-Pointing-Pointer IR and Raman spectra have been obtained. Black-Right-Pointing-Pointer The crystal structure has been studied. - Abstract: The Sr{sub 2}RESbO{sub 6} double perovskites (RE = La to Lu and Y) were synthesized by ceramic method. The structure and phase purity of the prepared double perovskites were examined by X-ray diffraction pattern and vibrational spectroscopy. A systematic analysis of the compounds structure was carried out for the first time by Raman and IR spectroscopies. A simple inspection of the diffraction patterns shows that these compounds have lower symmetry than the cubic which can be usually found in the Ba{sub 2}RESbO{sub 6} double perovskites. The four active modes (A{sub 1g}, E{sub g}, and two T{sub 2g}) in the Raman spectra and the active mode (T{sub 1u}) in the IR spectra previously described in the spectroscopic data of Ba compounds have changed. In the Sr compounds these modes have been split into its components, in some cases, being active in both types of spectra. According to our data the Sr{sub 2}RESbO{sub 6} double perovskites can be described by a monoclinic symmetry cell, space group P2{sub 1}/n. However, in the cases of Sr{sub 2}LaSbO{sub 6} and Sr{sub 2}PrSbO{sub 6} an alternative structure should be searched by neutron diffraction technique.

  10. Differentiation of Leishmania species by FT-IR spectroscopy

    Science.gov (United States)

    Aguiar, Josafá C.; Mittmann, Josane; Ferreira, Isabelle; Ferreira-Strixino, Juliana; Raniero, Leandro

    2015-05-01

    Leishmaniasis is a parasitic infectious disease caused by protozoa that belong to the genus Leishmania. It is transmitted by the bite of an infected female Sand fly. The disease is endemic in 88 countries Desjeux (2001) [1] (16 developed countries and 72 developing countries) on four continents. In Brazil, epidemiological data show the disease is present in all Brazilian regions, with the highest incidences in the North and Northeast. There are several methods used to diagnose leishmaniasis, but these procedures have many limitations, are time consuming, have low sensitivity, and are expensive. In this context, Fourier Transform Infrared Spectroscopy (FT-IR) analysis has the potential to provide rapid results and may be adapted for a clinical test with high sensitivity and specificity. In this work, FT-IR was used as a tool to investigate the promastigotes of Leishmaniaamazonensis, Leishmaniachagasi, and Leishmaniamajor species. The spectra were analyzed by cluster analysis and deconvolution procedure base on spectra second derivatives. Results: cluster analysis found four specific regions that are able to identify the Leishmania species. The dendrogram representation clearly indicates the heterogeneity among Leishmania species. The band deconvolution done by the curve fitting in these regions quantitatively differentiated the polysaccharides, amide III, phospholipids, proteins, and nucleic acids. L. chagasi and L. major showed a greater biochemistry similarity and have three bands that were not registered in L. amazonensis. The L. amazonensis presented three specific bands that were not recorded in the other two species. It is evident that the FT-IR method is an indispensable tool to discriminate these parasites. The high sensitivity and specificity of this technique opens up the possibilities for further studies about characterization of other microorganisms.

  11. Structural Characterization of Lignins Isolated from Caragana sinica Using FT-IR and NMR Spectroscopy

    Institute of Scientific and Technical Information of China (English)

    XIAOLing-ping; SHIZheng-jun; XUFeng; SUN Run-cang; Amar Kmohanty

    2011-01-01

    In order to efficiently explore and use woody biomass,six lignin fractions were isolated from dewaxed Caragana sinica via successive extraction with organic.solvents and alkaline solutions.The lignin structures were characterized by Fourier transform infrared spectroscopy (FT-IR) and 1D and 2D Nuclear Magnetic Resonance (NMR).FT-IR spectra revealed that the “core” of the lignin structure did not significantly change during the treatment under the conditions given.The results of 1 H and 13C NMR demonstrated that the lignin fraction L2,isolated with 70% ethanol containing 1% NaOH,was mainly composed of β-O-4 ether bonds together with G and S units and trace p-hydroxyphenyl unit.Based on the 2D HSQC NMR spectrum,the ethanol organosolv lignin fraction L1,extracted with 70% ethanol,presents a predominance of β-O-4' arylether linkages (61% of total side chains),and a low abundance of condensed carbon-carbon linked structures (such as β-β',β-1',and β-5') and a lower S/G ratio.Furthermore,a small percentage (ca.9%) of the linkage side chain was found to be acylated at the γ-carbon.

  12. Synthesis, structural, spectral (FT-IR, FT-Ra, and UV-Vis), thermal, and density functional studies on p-methylaniline complexes of Mn(II), Co(II), and Ni(II) bromides

    Science.gov (United States)

    Bardakçı, Tayyibe; Altun, Ahmet; Golcuk, Kurtulus; Kumru, Mustafa

    2015-11-01

    Transition metal complexes of the form MBr2L2, where M = Mn(II), Co(II) and Ni(II); L = p-methylaniline, were prepared and characterized by elemental and thermogravimetric analyses, magnetic moment measurements, and UV-vis, FT-IR and FT-Raman spectral studies. Geometries, spin-state energetics, and vibrational spectra of the complexes were obtained at the B3LYP/def2-TZVP level. The present experimental and theoretical data suggest 5-coordinate polymeric bromide bridged structure for the Mn complex, distorted tetrahedral structure for the Co complex, and distorted octahedral coordination site for the Ni complex. The experimental FT-IR and FT-Raman bands of the complexes were assigned based on the computational results expressed in terms of internal coordinates with percent potential energy distributions. The vibrational spectra suggest that the coordination occurs via nitrogen atom of p-methylaniline. The thermal characteristics of the complexes indicate that their decompositions start through p-methylaniline.

  13. Comparative study between 1-Propyl-3-methylimidazolium bromide and trimethylene bis-methylimidazolium bromide ionic liquids by FTIR/ATR and FT-RAMAN spectroscopies

    Science.gov (United States)

    Kadari, Mohamed; Belarbi, El Habib; Moumene, Taqiyeddine; Bresson, Serge; Haddad, Boumediene; Abbas, Ouissam; Khelifa, Brahim

    2017-09-01

    In this study, we synthesized two ionic liquids based on imidazolium: one is a monocationic and the other is a dicationic. They are respectively 1-Propyl-3-methylimidazolium bromide ([PrMIM+][Br-]) and trimethylene bis-methylimidazolium bromide ([M(CH2)3IM2+][2Br-]). The structures of these two ionic liquids which are composed of ions with atoms of the same nature were first identified by 1H,13C NMR, and then compared in a study by FT-RAMAN and FTIR/ATR spectroscopies. FT-RAMAN spectras of the dicationic ionic liquid are richer in modes in the different spectral regions. Hence this richness seems to be a consequence of the passage from one to two rings in the imidazolium cation. In particular, the vibrational modes in the spectral ranges 700-600 cm-1, 1700-1500 cm-1 and 3200-2700 cm-1 by FTIR/ATR seem to be sensitive to the change from mono to dicationic than in FT-RAMAN. The spectral range in which the intermolecular interactions are present (200-50 cm-1) is a marker of differentiation between the mono and the dicationic. The spectral ranges on 1700-1200 cm-1 and 3200-2700 cm-1 also show signs of upheaval between our two samples. We can also notice that there are much more active modes in FT-RAMAN spectroscopy than in FTIR/ATR spectroscopy.

  14. Synthesis, XRD crystal structure, spectroscopic characterization (FT-IR, 1H and 13C NMR), DFT studies, chemical reactivity and bond dissociation energy studies using molecular dynamics simulations and evaluation of antimicrobial and antioxidant activities of a novel chalcone derivative, (E)-1-(4-bromophenyl)-3-(4-iodophenyl)prop-2-en-1-one

    Science.gov (United States)

    Zainuri, D. Alwani; Arshad, Suhana; Khalib, N. Che; Razak, I. Abdul; Pillai, Renjith Raveendran; Sulaiman, S. Fariza; Hashim, N. Shafiqah; Ooi, K. Leong; Armaković, Stevan; Armaković, Sanja J.; Panicker, C. Yohannan; Van Alsenoy, C.

    2017-01-01

    In the present study, the title compound named as (E)-1-(4-bromophenyl)-3-(4-iodophenyl)prop-2-en-1-one was synthesized and structurally characterized by single-crystal X-ray diffraction. The compound crystallizes in the monoclinic system with P21/c space group with the unit cell parameters of a = 16.147 (2) Å, b = 14.270 (2) Å, c = 5.9058 (9) Å, β = 92.577 (3)° and Z = 4. The molecular geometry obtained from X-Ray structure determination was optimized by Density Functional Theory (DFT) using B3LYP/6-31G+(d, p)/Lanl2dz(f) method in the ground state. The IR spectrum was recorded and interpreted in details with the aid of Density Functional Theory (DFT) calculations and Potential Energy Distribution (PED) analysis. In order to investigate local reactivity properties of the title molecule, we have conducted DFT calculations of average local ionization energy surface and Fukui functions which were mapped to the electron density surface. In order to predict the open air stability and possible degradation properties, within DFT approach, we have also calculated bond dissociation energies. 1H and 13C NMR spectra were recorded and chemical shifts were calculated theoretically and compared with the experimental values. In addition, in vitro antimicrobial results show that the title compound has great potential of antibacterial activity against Staphylococcus aureus, Staphylococcus epidermidis and Micrococcus luteus bacteria and antifungal activity against Candida albicans in comparison to some reported chalcone derivatives. Antioxidant studies revealed the highest metal chelating activity of this compound.

  15. Semi-quantitative analysis of FT-IR spectra of humic fractions of nine US soils

    Science.gov (United States)

    Fourier Transform Infrared Spectroscopy (FT-IR) is a simple and fast tool for characterizing soil organic matter. However, most FT-IR spectra are only analyzed qualitatively. In this work, we prepared mobile humic acid (MHA) and recalcitrant calcium humate (CaHA) from nine soils collected from six ...

  16. Miniaturized FT-IR spectrometer for industrial process measurements

    Science.gov (United States)

    Herrala, Esko; Niemela, Pentti; Hannula, Tapio

    1990-08-01

    There have been made some attempts to transfer the advantages of FT-JR to industrial use. Commercially available research grade instruments have been large and rather expensive. However in many potential applications only medium resolution is required which means that the mirror displacement in a Michelson type interferometer remains short and computation of the Fourier transform can be executed by a small computer. Medium resolution gives also other advantages in spectrometer design simple source and detector optics less severe requirements for mirror transport and small size. We have used a Michelson type interferometer where the moving mirror is suspended by two flexures and driven by a coil actuator. Displacement of the mirror is monitored using moire transducer which is much smaller and has better thermal stability than the conventionally used HeNe laser. The beamsplitter is a standard CaF2/Si and a thermoelectrically cooled PbSe is used as the detector. In the present prototype data is transferred via parallel bus to a PC/AT compatible computer where the necessary mathematics is done. The spectral range is from 5000 to 1800 cm1 with resolution better than 8 cm1. Interferograins can be recorded several times per second and the computation time for a 2000 point spectrum is 10 seconds. Results of environmental tests carried out for the spectrometer will be presented. The results show that it is possible to construct a simple rugged and inexpensive FT-IR spectrometer

  17. Application of spectroscopic methods (FT-IR, Raman, ECD and NMR) in studies of identification and optical purity of radezolid

    Science.gov (United States)

    Michalska, Katarzyna; Gruba, Ewa; Mizera, Mikołaj; Lewandowska, Kornelia; Bednarek, Elżbieta; Bocian, Wojciech; Cielecka-Piontek, Judyta

    2017-08-01

    In the presented study, N-{[(5S)-3-(2-fluoro-4‧-{[(1H-1,2,3-triazol-5-ylmethyl)amino]methyl}biphenyl-4-yl)-2-oxo-1,3-oxazolidin-5-yl]methyl}acetamide (radezolid) was synthesized and characterized using FT-IR, Raman, ECD and NMR. The aim of this work was to assess the possibility of applying classical spectral methods such as FT-IR, Raman, ECD and NMR spectroscopy for studies on the identification and optical purity of radezolid. The experimental interpretation of FT-IR and Raman spectra of radezolid was conducted in combination with theoretical studies. Density functional theory (DFT) with the B3LYP hybrid functional was used for obtaining radezolid spectra. Full identification was carried out by COSY, 1H {13C} HSQC and 1H {13C} HMBC experiments. The experimental NMR chemical shifts and spin-spin coupling constants were compared with theoretical calculations using the DFT method and B3LYP functional employing the 6-311 ++G(d,p) basis set and the solvent polarizable continuum model (PCM). The experimental ECD spectra of synthesized radezolid were compared with experimental spectra of the reference standard of radezolid. Theoretical calculations enabled us to conduct HOMO and LUMO analysis and molecular electrostatic potential maps were used to determine the active sites of microbiologically active form of radezolid enantiomer. The relationship between results of ab initio calculations and knowledge about chemical-biological properties of S-radezolid and other oxazolidinone derivatives are also discussed.

  18. Characterization of the curing agents used in epoxy resins with TG/FT-IR technique

    Directory of Open Access Journals (Sweden)

    Benedita M. V. Romão

    2006-06-01

    Full Text Available Samples of epoxy resin (EP based on the diglycidyl ether of bisphenol A (DGEBA, cured with nadic methyl anhydride (NMA and mercaptan (CAPCURE 3-800, or amine-phenol (CAPCURE EH-30, respectively, SE 4 and SE 5, were prepared in the stoichiometric ratio determined by the supplier. The curing behaviour of the epoxy systems SE 4 and SE 5 was followed by DSC (Differential Scanning Calorimetry. These SE and their ingredients were analyzed using FTIR transmission techniques (KBr pellets, pyrolysis without control and controlled pyrolysis-FT-IR, the CONTROLPIR/FT-IR for characterizing the curing agents (CA. The temperature range used for samples pyrolysis was found from TG (thermogravimetry. Thus, the FT-IR bands of liquid pyrolysate obtained by CONTROLPIR/FT-IR were evaluated, in comparison to the reference spectrum of CA. The characterization of CA was also possible, by the analysis of such SE with the TG/FT-IR technique.

  19. Characterization of additives typically employed in EPDM formulations by using FT-IR of gaseous pyrolyzates

    Directory of Open Access Journals (Sweden)

    Natália Beck Sanches

    2014-06-01

    Full Text Available In this study, Fourier transform infrared spectroscopy (FT-IR was employed to investigate the gaseous pyrolysis products of ethylene - propylene - diene rubber (EPDM. The objective was to evaluate the potential of FT-IR analysis of gaseous pyrolyzates (PY-G/FT-IR for characterization of EPDM additives. Two EPDM formulations, containing additives typically employed in EPDM rubbers, were analyzed. Initially, gaseous pyrolysis products from paraffin oil, stearic acid, 2,2,4-trimethyl-1,2-dihydroquinoline, tetramethylthiuram monosulfide (TMTM, tetramethylthiuram disulfide (TMTD, and 2-mercaptobenzothiazole (MBT were characterized separately, and their main absorptions were identified. Subsequently, the gaseous pyrolysis products of raw, unvulcanized, and vulcanized EPDM formulations were analyzed. The similarities observed in the FT-IR spectra of unvulcanized and vulcanized EPDM show that the vulcanization process does not interfere with the pyrolysis products. The identification of the functional groups of the studied additives was possible in both unvulcanized and vulcanized EPDM samples, without solvent extraction. Results also demonstrate that the PY-G/FT-IR technique can identify additives containing sulfur in concentrations as low as 1.4 phr (1.26% in both unvulcanized and vulcanized EPDM. However, the method showed some limitation due to overlapping and to similarities of TMTM and TMTD PY-G/FT-IR spectra, which could not be distinguished from each other. The PY-G/FT-IR technique is a faster and cheaper alternative to the sophisticated techniques usually applied to detection of additives in rubbers.

  20. Study of normal colorectal tissue by FT-Raman spectroscopy.

    Science.gov (United States)

    Andrade, P O; Bitar, R A; Yassoyama, K; Martinho, H; Santo, A M E; Bruno, P M; Martin, A A

    2007-03-01

    FT-Raman spectroscopy was employed to study normal human colorectal tissues in vitro with the aim of evaluating the spectral differences of the complex colon mucous in order to establish a characteristic Raman spectrum. The samples were collected from 39 patients, providing 144 spectra for the statistical analysis. The results enable one to establish three well-defined spectroscopic groups of non-altered colorectal tissues that were consistently checked by statistical (clustering) and biological (histopathology) analyses: group 1 is represented by samples with the presence of epithelial layer, connective tissue papillae, and smooth muscle tissue; group 2 comprises tissues with epithelial layer and connective tissue papillae; group 3 presented mostly fatty and slack conjunctive tissue. The study reveals the existence of an intrinsic spectral variability for each patient that must be considered when sampling tissues fragments to build a spectral database. This is the first step for future studies and applications of Raman spectroscopy to optical biopsy and diagnosis of colorectal cancer.

  1. Breast cancer diagnosis using FT-RAMAN spectroscopy

    Science.gov (United States)

    Bitar, Renata A.; Martin, Airton A.; Criollo, Carlos J. T.; Ramalho, Leandra N. Z.

    2005-04-01

    In this study FT-RAMAN spectra of breast tissue from 35 patients were obtained and separated into nine groups for histopathologic analysis, which are as follows: normal breast tissue, fibrocystic condition, in situ ductal carcinoma, in situ ductal carcinoma with necrosis, infiltrate ductal carcinoma, infiltrate inflammatory ductal carcinoma, infiltrate medullar ductal carcinoma, infiltrate colloid ductal carcinoma, and infiltrate lobular carcinoma. Using spectrum averages taken from each group a qualitative analysis was performed to compare these molecular compositions to those known to be present in abnormal concentrations in pathological situations, e.g. the development of desmoplastic lesions with a stroma of dense collagen in tumoral breast tissues which substitute adipose stroma of non-diseased breast tissue. The band identified as amino acids, offered basis for observation in the existence of alterations in the proteins, thus proving Raman Spectroscopic capacity in identification of primary structures of proteins; secondary protein structure was also identified through the peptic links, Amide I and Amide III, which have also been identified by various authors. Alterations were also identified in the peaks and bandwidths of nucleic acids demonstrating the utilization of Raman Spectroscopy in the analysis of the cells nucleus manifestations. All studies involving Raman Spectroscopy and breast cancer have shown excellent result reliability and therefore a basis for the technical theory.

  2. Monitoring lipase-catalyzed interesterification for bulky fats modification with FT-IR/NIR spectroscopy

    DEFF Research Database (Denmark)

    Chang, Tinghong; Lai, Xuxin; Zhang, Hong

    2005-01-01

    This work demonstrates the application of FT-IR and FT-NIR spectroscopy to monitor the enzymatic interesterification process for bulky fat modification. The reaction was conducted between palm stearin and coconut oil (70/30, w/w) with the catalysis of Lipozyme TL IM at 70°C in a batch reactor...... (PLS) regression. High correlations (r > 0.96) were obtained from cross validations of the data estimated by FT-IR, FT-NIRand above-mentioned conventional analytical methods, except for correlations (r = 0.90-0,95) between FT-IR and SFC profiles. Overall, FT-NIR spectroscopy coupled with transmission...

  3. Synthesis, molecular structure, DFT studies and antimicrobial activities of some novel 3-(1-(3,4-dimethoxyphenethyl)-4,5-diphenyl-1H-imidazol-2-yl)-1H-indole derivatives and its molecular docking studies

    Science.gov (United States)

    Rajaraman, D.; Sundararajan, G.; Loganath, N. K.; Krishnasamy, K.

    2017-01-01

    A new series of 3-(1-(3,4-dimethoxyphenethyl)-4,5-diphenyl-1H-imidazol-2-yl)-1H-indole derivatives (5a-5j) are conveniently synthesized and characterized by IR, 1H NMR and 13C NMR spectral techniques. The compound 5f was also confirmed by single crystal XRD analysis and optimized bond parameters were calculated by density functional theory (DFT) at B3LYP/6-31G (d, p) level. The optimized geometrical parameters obtained by DFT calculation are in good agreement with single crystal XRD data. The experimentally observed FT-IR and FT-Raman bands were assigned to different normal modes of the molecule. The stability and charge delocalization of the molecule were also studied by Natural Bond Orbital (NBO) analysis. The overlapping of atomic orbital along with their predicted energy is explained on the basis of HOMO-LUMO energy gap calculations. Molecular Electrostatic Potential map (MEP) was studied for predicting the reactive sites. The reported molecule used as a potential NLO material since it has high μβ0 value. The antibacterial activities of these derivatives were studied using molecular docking studies and it is compared with their experimental results.

  4. Quantum-chemical, NMR, FT IR, and ESI MS studies of complexes of colchicine with Zn(II).

    Science.gov (United States)

    Jankowski, Wojciech; Kurek, Joanna; Barczyński, Piotr; Hoffmann, Marcin

    2017-04-01

    Colchicine is a tropolone alkaloid from Colchicinum autumnale. It shows antifibrotic, antimitotic, and anti-inflammatory activities, and is used to treat gout and Mediterranean fever. In this work, complexes of colchicine with zinc(II) nitrate were synthesized and investigated using DFT, (1)H and (13)C NMR, FT IR, and ESI MS. The counterpoise-corrected and uncorrected interaction energies of these complexes were calculated. We also calculated their (1)H, (13)C NMR, and IR spectra and compared them with the corresponding experimentally obtained data. According to the ESI MS mass spectra, colchicine forms stable complexes with zinc(II) nitrate that have various stoichiometries: 2:1, 1:1:1, and 2:1:1 with respect to colchichine, Zn(II), and nitrate ion. All of the complexes were investigated using the quantum theory of atoms in molecules (QTAIM). The calculated and the measured spectra showed differences before and after the complexation process. Calculated electron densities and bond critical points indicated the presence of bonds between the ligands and the central cation in the investigated complexes that satisfied the quantum theory of atoms in molecules. Graphical Abstract DFT, NMR, FT IR, ESI MS, QTAIM and puckering studies of complexes of colchicine with Zn(II).

  5. Generation of chemical movies: FT-IR spectroscopic imaging of segmented flows.

    Science.gov (United States)

    Chan, K L Andrew; Niu, X; deMello, A J; Kazarian, S G

    2011-05-01

    We have previously demonstrated that FT-IR spectroscopic imaging can be used as a powerful, label-free detection method for studying laminar flows. However, to date, the speed of image acquisition has been too slow for the efficient detection of moving droplets within segmented flow systems. In this paper, we demonstrate the extraction of fast FT-IR images with acquisition times of 50 ms. This approach allows efficient interrogation of segmented flow systems where aqueous droplets move at a speed of 2.5 mm/s. Consecutive FT-IR images separated by 120 ms intervals allow the generation of chemical movies at eight frames per second. The technique has been applied to the study of microfluidic systems containing moving droplets of water in oil and droplets of protein solution in oil. The presented work demonstrates the feasibility of the use of FT-IR imaging to study dynamic systems with subsecond temporal resolution.

  6. Correlation between the FT-IR characteristics and metoprolol tartrate release of methylcellulose-based patches.

    Science.gov (United States)

    Papp, József; Horgos, József; Szente, Virág; Zelkó, Romána

    2010-06-15

    The aim of the present study was to investigate how the drug release and FT-IR characteristics of metolose patches were influenced by the changes of Metolose SM 4000 (methylcellulose) and Metolose 90SH 100.000SR (hypromellose) proportions. FT-IR spectroscopy measurements were performed in parallel with the metoprolol tartrate release study to track the effect of the composition on the drug release. The metoprolol tartrate release profile of the patches was evaluated by Weibull distribution. Linear relationship was found with good correlation between the logarithm of time interval necessary to release 63.2% of metoprolol tartrate (tau(d) values) and the peak area measured within the characteristic FT-IR wavenumbers of patches. The application of FT-IR measurements can be recommended as a rapid, non-destructive screening method during the in-process control of patches.

  7. Determination of polymer content in energetic materials by FT-IR

    Directory of Open Access Journals (Sweden)

    Elizabeth C. Mattos

    2009-06-01

    Full Text Available A new methodology was developed to characterize and to quantify the polymer content in PBX (HMX/Viton by Fourier Transform Infrared Spectroscopy (FT-IR, using the Termogravimetric analysis (TG as reference techniques for the quantitative method. The quantification methodology, proposed by us, using the Fourier transform infrared-attenuated total reflectance (FT-IR/ATR showed excellent results, being faster than the usual methodologies and can eliminate the generation of chemical residues.

  8. TG/FT-IR characterization of additives typically employed in EPDM formulations

    Directory of Open Access Journals (Sweden)

    Natália Beck Sanches

    2015-06-01

    Full Text Available AbstractThermogravimetric analysis coupled to Fourier transform infrared spectroscopy (TG/FT-IR is a very popular technique for rubbers characterization. It involves analyses of the base polymer and additives. Ethylene–propylene–diene (EPDM rubbers are frequently investigated by TG/FT-IR; however, the focus has been the degradation temperature range of the polymer. In this study, unvulcanized and vulcanized EPDM rubber and its additives were investigated by TG/FT-IR, without solvent extraction, and in a wide temperature range. Initially, the additives were individually characterized. TG/FT-IR identified the characteristic groups of all the additives analyzed and distinguished them from each other. Afterwards, unvulcanized and vulcanized EPDM rubbers were investigated without prior extraction.TG/FT-IR detected absorptions due to the additives tetramethylthiuram monosulfide and 2-mercaptobenzothiazole. Both of these sulfur-containing additives were present in the EPDM formulation at concentrations of 0.7 phr (0.63 wt %. The TG/FT-IR technique had some limitations, because not all the additives in EPDM rubber were detected. Paraffin oil, stearic acid and 2,2,4-trimethyl-1,2-dihydroquinoline functional groups were not observed in either the unvulcanized or vulcanized EPDM. Nevertheless, in addition to the ability of this method to detect sulfur-containing groups, the lack of a pre-extraction reduces the time and effort required for additive analysis in rubbers.

  9. A theoretical study on the molecular structure and vibrational (FT-IR and Raman) spectra of new organic-inorganic compound [N(C3H7)4]2SnCl6.

    Science.gov (United States)

    Hajlaoui, Sondes; Chaabane, Iskandar; Oueslati, Abderrazak; Guidara, Kamel; Bulou, Alain

    2014-01-03

    Tetrapropylammoniumchloride was used as a ligand for the synthesis of the new organic-inorganic compound bis-tetrapropylammoniumhexachlorostannate. Vibrational study in the solid state was performed by FT-IR of the free Tetrapropylammoniumchloride ligand (TPACL) and by FT-IR and FT-Raman spectroscopies of the [N(C3H7)4]2SnCl6 compound. The comparative analysis of the Infrared spectra of the title compound with that of the free ligand was discussed. The structure of the [N(C3H7)4]2SnCl6 compound was optimized by density functional theory (DFT) using B3LYP method and shows that the calculated values obtained by B3LYP/LanL2MB basis are in much better agreement with the experimental data than those obtained by B3LYP/LanL2DZ. The vibrational frequencies were evaluated using density functional theory (DFT) with the standard B3LYP/LanL2MB basis, and were scaled using various scale factors. Root mean square (RMS) value was calculated and the small difference between experimental and calculated modes has been interpreted by intermolecular interactions in the crystal. Copyright © 2013 Elsevier B.V. All rights reserved.

  10. Application of Fourier transform infrared (FT-IR) spectroscopy in determination of microalgal compositions.

    Science.gov (United States)

    Meng, Yingying; Yao, Changhong; Xue, Song; Yang, Haibo

    2014-01-01

    Fourier transform infrared spectroscopy (FT-IR) was applied in algal strain screening and monitoring cell composition dynamics in a marine microalga Isochrysis zhangjiangensis during algal cultivation. The content of lipid, carbohydrate and protein of samples determined by traditional methods had validated the accuracy of FT-IR method. For algal screening, the band absorption ratios of lipid/amide I and carbo/amide I from FT-IR measurements allowed for the selection of Isochrysis sp. and Tetraselmis subcordiformis as the most potential lipid and carbohydrate producers, respectively. The cell composition dynamics of I. zhangjiangensis measured by FT-IR revealed the diversion of carbon allocation from protein to carbohydrate and neutral lipid when nitrogen-replete cells were subjected to nitrogen limitation. The carbo/amide I band absorption ratio had also been demonstrated to depict physiological status under nutrient stress in T. subcordiformis. FT-IR serves as a tool for the simultaneous measurement of lipid, carbohydrate, and protein content in cell.

  11. Diagnosis of atherosclerosis in human carotid artery by FT-Raman spectroscopy: Principal Components Analysis algorithm

    Science.gov (United States)

    Nogueira, Grazielle V.; Silveira, Landulfo, Jr.; Martin, Airton A.; Zangaro, Renato A.; Pacheco, Marcos T.; Chavantes, Maria C.; Zampieri, Marcelo; Pasqualucci, Carlos A. G.

    2004-07-01

    FT- Raman Spectroscopy (FT-Raman) could allow identification and evaluation of human atherosclerotic lesions. A Raman spectrum can provide biochemical information of arteries which can help identifying the disease status and evolution. In this study, it is shown the results of FT-Raman for identification of human carotid arteries in vitro. Fragments of human carotid arteries were analyzed using a FT-Raman spectrometer with a Nd:YAG laser at 1064nm operating at an excitation power of 300mW. Spectra were obtained with 250 scans and spectral resolution of 4 cm-1. Each collection time was approximately 8 min. A total of 75 carotid fragments were spectroscopically scanned and FT-Raman results were compared with histopathology. Principal Components Analysis (PCA) was used to model an algorithm for tissue classification into three categories: normal, atherosclerotic plaque without calcification and atherosclerotic plaque with calcification. Non-atherosclerotic (normal) artery, atherosclerotic plaque and calcified plaque exhibit different spectral signatures related to biochemicals presented in each tissue type, such as, bands of collagen and elastin (proteins), cholesterol and its esters and calcium hydroxyapatite and carbonate apatite respectively. Results show that there is 96% match between classifications based on PCA algorithm and histopathology. The diagnostic applied over all 75 samples had sensitivity and specificity of about 89% and 100%, respectively, for atherosclerotic plaque and 100% and 98% for calcified plaque.

  12. FT-IR Application for the Detection of Pistachio Oil Adulteration

    Directory of Open Access Journals (Sweden)

    Ali Sheibani

    2014-09-01

    Full Text Available In this work, fourier transform infrared spectroscopy (FT-IR is used to identify and detection the adulteration of pistachio oil with cheap edible oils of corn, sunflower and soybean. For this purpose, pistachio oil was blended with cheap oils at concentration level of 10 to 60% (w/w. Then, FT-IR spectra of pure and adulterated pistachio oil samples were obtained. The fingerprints region was found to be useful in investigation of the adulteration of pistachio oil. At this region, the absorbance peaks of FT-IR decreased by increasing the adulterant amount with a linear relation that can be applied for the quality and quantity purposes. The obtained results showed that the proposed method can be considered and used as an alternative method in the detection and semi-quantization of adulteration in pistachio oil.

  13. On-line sample treatment and FT-IR determination of doxylamine succinate in pharmaceuticals.

    Science.gov (United States)

    Ventura-Gayete, Josep F; de la Guardia, Miguel; Garrigues, Salvador

    2006-12-15

    A low solvent consumption method for Fourier transform infrared spectroscopy (FT-IR) determination of doxylamine succinate in pharmaceuticals has been developed. The analyte was continuous and selectively extracted with a 13% (v/v) ethanol:chloroform solvent mixture, recirculating the solvent through the sample and monitoring the process by FT-IR. Doxylamine succinate was determined by on-line standard addition measuring the peak area in the regions 1730-1710 and 1485-1462cm(-1) corrected with a two-point baseline established between 2000 and 1800cm(-1). This new method implies low volumes of chloroformic solvent mixture, only 2.6mL per sample, in front of classical batch FT-IR methods, improving analytical efficiency and reducing waste generation. The on-line extraction and standard addition determination of doxylamine succinate allowed a throughput of 10h(-1).

  14. FOURIER TRANSFORM INFRA RED (FT-IR SPECTRAL STUDIES OF FOENICULUM VULGARE

    Directory of Open Access Journals (Sweden)

    V. Devika

    2013-03-01

    Full Text Available Plants have been used in traditional medicine for several thousand years. Medicinal plants as a group comprise approximately 8000 species and account for about 50% of all the higher flowering plant species in India. In the present study, the plant Foeniculum vulgare was subjected to FT-IR spectroscopy. FT-IR-is a vibrational spectroscopy that records absorptions of IR light by chemical bonds in all molecules incl. polymers. Foeniculum vulgare (Apiaceae commonly known as fennel is a well known and important medicinal and aromatic plant widely used as carminative, digestive, lactogogue and diuretic and in treating respiratory and gastrointestinal disorders. The results showed the detections of the bands in organic molecules. Thus the study became evident that the plant posses some bioactive compounds at various bands obtained after FT-IR.

  15. FT Raman spectroscopy in the study of human teeth under medications demineralization

    Science.gov (United States)

    de Sant'Anna, G. R.; Nascimento, E. B.; Higa, A. G.; Santos, E. A. P.; Espirito Santo, A. M.; Martín, A. A.

    2015-06-01

    The in situ study evaluated antihistamine (DA) and bronchodilator(DB) drugs actions on dental enamel using FT Raman spectroscopy. Analysis of pH drugs were permorfed, DA 1.48 and DB 2.90. Enamel (n=24) were analysed by FT - Raman and randomly distributed in control group (CG) and experimental groups (GEA and GEB), specimens fixed in palatine appliances. In CG, dripped 20% sucrose (8Xday/3 min)/7 days. In GEA, 20% sucrose (8Xday/3 min) + drug (4Xday/3 min). In GEB, 20% sucrose (8Xday/3 min) B + drug (4Xday/3 min). FT- Raman analysis was performed again. Data analyzed by Student t test and ANOVA Differences in peak intensity of carbonate (CO3) /phosphate (PO4) (pdrugs, reduction in the amount of carbonate, organic and inorganic components were observed, denoting possible demineralization.

  16. Monitoring of the molecular structure of lubricant oil using a FT-Raman spectrometer prototype

    Science.gov (United States)

    Ortega Clavero, Valentin; Weber, Andreas; Schröder, Werner; Curticapean, Dan; Javahiraly, Nicolas; Meyrueis, Patrick

    2014-05-01

    The determination of the physical state of the lubricant materials in complex mechanical systems is highly critical from different points of view: operative, economical, environmental, etc. Furthermore, there are several parameters that a lubricant oil must meet for a proper performance inside a machine. The monitoring of these lubricants can represent a serious issue depending on the analytical approach applied. The molecular change of aging lubricant oils have been analyzed using an all-standard-components and self-designed FT-Raman spectrometer. This analytical tool allows the direct and clean study of the vibrational changes in the molecular structure of the oils without having direct contact with the samples and without extracting the sample from the machine in operation. The FT-Raman spectrometer prototype used in the analysis of the oil samples consist of a Michelson interferometer and a self-designed photon counter cooled down on a Peltier element arrangement. The light coupling has been accomplished by using a conventional 62.5/125μm multi-mode fiber coupler. The FT-Raman arrangement has been able to extract high resolution and frequency precise Raman spectra, comparable to those obtained with commercial FT-Raman systems, from the lubricant oil samples analyzed. The spectral information has helped to determine certain molecular changes in the initial phases of wearing of the oil samples. The proposed instrument prototype has no additional complex hardware components or costly software modules. The mechanical and thermal irregularities influencing the FT-Raman spectrometer have been removed mathematically by accurately evaluating the optical path difference of the Michelson interferometer. This has been achieved by producing an additional interference pattern signal with a λ= 632.8 nm helium-neon laser, which differs from the conventional zero-crossing sampling (also known as Connes advantage) commonly used by FT-devices. It enables the FT-Raman system to

  17. Study On Gallstone And Bezoar (Ox Gallstone) by FT-IR Spectroscopy

    Science.gov (United States)

    Wu, Jinguang; Shen, Guorong; Guo, Hai; Xu, Guangxian

    1985-12-01

    Some specimens of gallstones with black colour and pigment gallstones were studied by FT-IR spectroscopy. From the subtraction spectra of the samples using calcium bilirubin as the reference substance, the characteristic bands of the proteins were obtained. Bezoar is the gallstone of ox. It is an important ingredient of some Chinese traditional medicines. Four specimens of natural bezoar produced from different places were studied by FT-IR. From the subtraction spectra of the bezoar samples using calcium bilirubin as the reference, the main bands of protein were also obtained. The secondary structures of the proteins were discussed.

  18. Synthesis, crystal structure investigation, DFT studies and DPPH radical scavenging activity of 1-(furan-2-ylmethyl)-2,4,5-triphenyl-1H-imidazole derivatives

    Science.gov (United States)

    Rajaraman, D.; Sundararajan, G.; Rajkumar, R.; Bharanidharan, S.; Krishnasamy, K.

    2016-03-01

    A new series of 1-(furan-2ylmethyl)-2,4,5-triphenyl-1H-imidazole derivatives are conveniently synthesized and characterized by IR, 1H NMR and 13C NMR spectral techniques. The compound 5a also characterized by HSQC correlation spectra. All the newly synthesized compounds were evaluated for their antioxidant activities with DPPH radical scavenging activity. The structure of 5e was also confirmed by single crystal XRD analysis and optimized bond parameters are calculated by density functional theory (DFT) method at B3LYP/6-31G (d, p) level of theory. The optimized geometrical parameters obtained by DFT calculation are in good agreement with single crystal XRD data. The experimentally observed FT-IR and FT-Raman bands were assigned to different normal modes of the molecule. The stability and charge delocalization of the molecule were also studied by natural bond orbital (NBO) analysis. The HOMO-LUMO energies describe the charge transfer takes place within the molecule. Molecular electrostatic potential has been analyzed. The reported 5e molecule used as a potential NLO material since it has high μβ0 value.

  19. Theoretical and experimental investigations on molecular structure of 7-Chloro-9-phenyl-2,3-dihydroacridin-4(1H)-one with cytotoxic studies

    Science.gov (United States)

    Satheeshkumar, Rajendran; Shankar, Ramasamy; Kaminsky, Werner; Kalaiselvi, Sivalingam; Padma, Viswanadha Vijaya; Rajendra Prasad, Karnam Jayarampillai

    2016-04-01

    7-Chloro-9-phenyl-2,3-dihydroacridin-4(1H)-one (3) is synthesized from 2-amino-5-chlorobenzophenone (1) and 1,2-cyclohexanedione (2) in the presence of catalyst InCl3. FT-IR, FT-Raman and FT-NMR spectra of molecule 3 have been recorded and the structure was confirmed by single crystal X-ray diffraction. CDCl3 and DMSO-d6 FT-NMR spectra and 1H and 13C NMR chemical shifts have been measured in molecule 3 and calculated at the B3LYP/6-311G (d,p) and MO6-2x/6-311G (d,p) levels of theory. Similarly calculated vibrational frequencies were found in good agreement with experimental findings. The optimized geometry of molecule 3 was compared with experimental XRD values. DFT calculations of the molecular electrostatic potential (MEP) and HOMO - LUMO frontier orbitals identified chemically active sites of molecule 3 responsible for its bioactivity. The title compound, 3 exhibits higher cytotoxicity in Human breast cancer cells (MCF-7) compared to human lung adenocarcinoma cells (A549).

  20. Vibrational spectroscopic investigations, molecular dynamic simulations and molecular docking studies of N‧-diphenylmethylidene-5-methyl-1H-pyrazole-3-carbohydrazide

    Science.gov (United States)

    Pillai, Renjith Raveendran; Menon, Vidya V.; Mary, Y. Shyma; Armaković, Stevan; Armaković, Sanja J.; Panicker, C. Yohannan

    2017-02-01

    FT-IR and FT-Raman spectra of N‧-diphenylmethylidene-5-methyl-1H-pyrazole-3-carbohydrazide were recorded and analyzed. Due to the industrial and biological importance of pyrazole derivatives, we have carried out an extensive quantum chemical study on N‧-diphenylmethylidene-5-methyl-1H-pyrazole-3-carbohydrazide. The theoretical ground state geometry and electronic structure of the title molecule were optimized by DFT/B3LYP/6-311G++(d,p) method and compared with those of the crystal data. The wave numbers obtained are assigned by potential energy distribution. The ring breathing modes of the benzene rings are assigned theoretically at 1009 cm-1 for the mono substituted phenyl rings. The first order hyperpolarizability is comparable with that of similar derivatives and 16 times that of the standard NLO material urea. Conformational analysis was conducted in order to locate all possible conformations of the title compound, followed by investigation of local reactivity properties by MEP and ALIE surfaces. Natural bond orbital analysis has been carried out to analyse the stability of the molecule arising from hyper-conjugative interactions and charge delocalization. Further, reactive properties via autoxidation and hydrolysis mechanisms have been assessed through calculations of bond dissociation energies and radial distribution functions. Docking results confirmed that the compound was a potential inhibitor of CDK2s and were in agreement with the previous reported studies.

  1. Monitoring lipase-catalyzed interesterification for bulky fats modification with FT-IR/NIR spectroscopy

    DEFF Research Database (Denmark)

    Chang, Tinghong; Lai, Xuxin; Zhang, Hong

    2005-01-01

    This work demonstrates the application of FT-IR and FT-NIR spectroscopy to monitor the enzymatic interesterification process for bulky fat modification. The reaction was conducted between palm stearin and coconut oil (70/30, w/w) with the catalysis of Lipozyme TL IM at 70°C in a batch reactor...... (PLS) regression. High correlations (r > 0.96) were obtained from cross validations of the data estimated by FT-IR, FT-NIRand above-mentioned conventional analytical methods, except for correlations (r = 0.90-0,95) between FT-IR and SFC profiles. Overall, FT-NIR spectroscopy coupled with transmission....... The blends and interesterified fats samples in liquid form were measured by attenuated total reflectance (ATR) based FT-IR (spectra region: 1516-781 cm-1) and transmission mode based FT-NIR (spectra region: 5369-4752 cm-1) with temperature both controlled at 70°C. The samples in solid form were also measured...

  2. Preliminary Study on Pyrolysis of Polymethylsilsesquioxane by FT-IR and XPS

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Changes of composition and structure of various samples of polymethylsilsesquioxane (PMSQ) pyrolysed at different temperature under flowing nitrogen were investigated by means of FT-IR and X-ray photoelectron spectroscopy. Two temperature domains correspond to important changes in the chemical composition of PMSQ. The former (Tp 500oC) is associated with the organic-inorgnic transition.

  3. IDENTIFICATION OF BIS(2-CHLOROETHYL) ETHER HYDROLYSIS PRODUCTS BY DIRECT AQUEOUS INJECTION GC/FT-IR

    Science.gov (United States)

    Gas chromatography coupled to Fourier-transform infrared spectroscopy (GC/FT-IR) is rapidly becoming an accepted analytical technique complementary to GC/mass spectroscopy for identifying organic compounds in mixtures at low to moderate concentrations. irect aqueous injection (DA...

  4. Characterization of Organosolv Lignins using Thermal and FT-IR Spectroscopic Analysis

    Science.gov (United States)

    Rhea J. Sammons; David P. Harper; Nicole Labbe; Joseph J. Bozell; Thomas Elder; Timothy G. Rials

    2013-01-01

    A group of biomass-derived lignins isolated using organosolv fractionation was characterized by FT-IR spectral and thermal property analysis coupled with multivariate analysis. The principal component analysis indicated that there were significant variations between the hardwood, softwood, and grass lignins due to the differences in syringyl and guaiacyl units as well...

  5. 1064nm FT-Raman spectroscopy for investigations of plant cell walls and other biomass materials

    Science.gov (United States)

    Umesh P. Agarwal

    2014-01-01

    Raman spectroscopy with its various special techniques and methods has been applied to study plant biomass for about 30 years. Such investigations have been performed at both macro- and micro-levels. However, with the availability of the Near Infrared (NIR) (1064 nm) Fourier Transform (FT)-Raman instruments where, in most materials, successful fluorescence suppression...

  6. Determination of ethylenic residues in wood and TMP of spruce by FT-Raman spectroscopy

    Science.gov (United States)

    Umesh P. Agarwal; Sally A. Ralph

    2008-01-01

    A method based on FT-Raman spectroscopy is proposed for determining in situ concentrations of ethylenic residues in softwood lignin. Raman contributions at 1133 and 1654 cm-1, representing coniferaldehyde and coniferyl alcohol structures, respectively, were used in quantifying these units in spruce wood with subsequent conversion to concentrations in lignin. For...

  7. Collaborative Student Laboratory Exercise Using FT-IR Spectroscopy for the Kinetics Study of a Biotin Analogue

    Science.gov (United States)

    Leong, Jhaque; Ackroyd, Nathan C.; Ho, Karen

    2014-01-01

    The synthesis of N-methoxycarbonyl-2-imidazolidone, an analogue of biotin, was conducted by organic chemistry students and confirmed using FT-IR and H NMR. Spectroscopy students used FT-IR to measure the rate of hydrolysis of the product and determined the rate constant for the reaction using the integrated rate law. From the magnitude of the rate…

  8. Analysis and Assessment of Agrimonia Pilosa Ledeb from Different Sources Using FT-IR Spectroscopy

    Institute of Scientific and Technical Information of China (English)

    Bao-qing WANG; Zhe-xiong JIN

    2010-01-01

    To get the IR spectrums of Agrimonia Pilosa Ledeb (APL) from China and Japan areas,and to find out the characters of IR spectrums through the content of different chemical constituents,to provide a fast and effective analysis method monitor the inherent qualities of traditional Chinese medicine-APL.Fourier Transform Infrared Spectroscopy(FT-IR) was applied to detect sample of APL from China and Japan areas.This study showed that the IR spectra of APL from China and Japan areas have their unique IR fingerprint features.The contents of tannin and calcium phosphate in APL from China is different APL from Japan.So FT-IR is a very quick,effective and well repetitive method for monitoring and distinguishing the traditional Chinese medicine.

  9. Characterization of human ovarian teratoma hair by using AFM, FT-IR, and Raman spectroscopy.

    Science.gov (United States)

    Kim, Kyung Sook; Lee, Jinwoo; Jung, Min-Hyung; Choi, Young Joon; Park, Hun-Kuk

    2011-12-01

    The structural, physical, and chemical properties of hair taken from an ovarian teratoma (teratoma hair) was first examined by atomic force microscopy (AFM), Fourier transform infrared (FT-IR), and Raman spectroscopy. The similarities and differences between the teratoma hair and scalp hair were also investigated. Teratoma hair showed a similar morphology and chemical composition to scalp hair. Teratoma hair was covered with a cuticle in the same manner as scalp hair and showed the same amide bonding modes as scalp hair according to FT-IR and Raman spectroscopy. On the other hand, teratoma hair showed different physical properties and cysteic acid bands from scalp hair: the surface was rougher and the adhesive force was lower than the scalp hair. The cystine oxides modes did not change with the position unlike scalp hair. These differences can be understood by environmental effects not by the intrinsic properties of the teratoma hair.

  10. Characterization of the crystalline structure of cellulose using static and dynamic FT-IR spectroscopy.

    Science.gov (United States)

    Akerholm, Margaretha; Hinterstoisser, Barbara; Salmén, Lennart

    2004-02-25

    The cellulose structure is a factor of major importance for the strength properties of wood pulp fibers. The ability to characterize small differences in the crystalline structures of cellulose from fibers of different origins is thus highly important. In this work, dynamic FT-IR spectroscopy has been further explored as a method sensitive to cellulose structure variations. Using a model system of two different celluloses, the relation between spectral information and the relative cellulose Ialpha content was investigated. This relation was then used to determine the relative cellulose Ialpha content in different pulps. The estimated cellulose I allomorph compositions were found to be reasonable for both unbleached and bleached chemical pulps. In addition, it was found that the dynamic FT-IR spectroscopy technique had the potential to indicate possible correlation field splitting peaks of cellulose Ibeta.

  11. Study of the Pyrrol/Diphenylamine Copolymer by FT-IR spectroscopy and conductivity

    Directory of Open Access Journals (Sweden)

    Carlos Alberto Perez

    2004-01-01

    Full Text Available The main goal of this study was to analyze the physical properties of the copolymer formed by the electrochemical deposition of the polydiphenylamine (PDPA on polypyrrole (Ppy and Ppy on PDPA, in different conditions, through the characterization of the materials formed by the resonant Raman, FT-IR and conductivity techniques. The interactions among the species which are present in the new copolymer structure and the changes in electronic conductivity, were verified. The copolymer was also synthesized electrochemically in the presence of iodide species and the material was characterized by FT-IR spectroscopy and conductivity. The role of the dopant was studied in the process of charge transfer between the copolymer-dopant, acting in the stabilization of the species in the polymer backbone and the increase of the electronic conductivity.

  12. Changes in liver cell DNA methylation status in diabetic mice affect its FT-IR characteristics.

    Directory of Open Access Journals (Sweden)

    Benedicto de Campos Vidal

    Full Text Available Lower levels of cytosine methylation have been found in the liver cell DNA from non-obese diabetic (NOD mice under hyperglycemic conditions. Because the Fourier transform-infrared (FT-IR profiles of dry DNA samples are differently affected by DNA base composition, single-stranded form and histone binding, it is expected that the methylation status in the DNA could also affect its FT-IR profile.The DNA FT-IR signatures obtained from the liver cell nuclei of hyperglycemic and normoglycemic NOD mice of the same age were compared. Dried DNA samples were examined in an IR microspectroscope equipped with an all-reflecting objective (ARO and adequate software.Changes in DNA cytosine methylation levels induced by hyperglycemia in mouse liver cells produced changes in the respective DNA FT-IR profiles, revealing modifications to the vibrational intensities and frequencies of several chemical markers, including νas -CH3 stretching vibrations in the 5-methylcytosine methyl group. A smaller band area reflecting lower energy absorbed in the DNA was found in the hyperglycemic mice and assumed to be related to the lower levels of -CH3 groups. Other spectral differences were found at 1700-1500 cm(-1 and in the fingerprint region, and a slight change in the DNA conformation at the lower DNA methylation levels was suggested for the hyperglycemic mice. The changes that affect cytosine methylation levels certainly affect the DNA-protein interactions and, consequently, gene expression in liver cells from the hyperglycemic NOD mice.

  13. The Utilization of FT-IR for Army Oil Condition Monitoring

    Science.gov (United States)

    1998-01-01

    partial combustion and distillation of lighter components. FT-IR determines fuel contamination by measuring the absorbance bands of specific...of different compounds, additives and reformates. A marker band typical in fuel contaminated oil samples was found at 810 cm". This absorbance band is...a flammable solvent, is used to clean the transmission cell between samples. One Army base suggested a terpene based, non-flammable solvent, Electron

  14. Molecular structure, NMR, UV-Visible, vibrational spectroscopic and HOMO, LUMO analysis of (E)-1-(2, 6-bis (4-methoxyphenyl)-3, 3-dimethylpiperidine-4-ylidene)-2-(3-(3, 5-dimethyl-1H-pyrazol-1-yl) pyrazin-2-yl) hydrazine by DFT method

    Science.gov (United States)

    Alphonsa, A. Therasa; Loganathan, C.; Anand, S. Athavan Alias; Kabilan, S.

    2016-02-01

    We have synthesized (E)-1-(2, 6-bis (4-methoxyphenyl)-3, 3-dimethylpiperidine-4-ylidene)-2-(3-(3, 5-dimethyl-1H-pyrazol-1-yl) pyrazin-2-yl) hydrazine (PM6). It was characterized using FT-IR, FT-Raman, 1H NMR, 13C NMR techniques. To interpret the experimental data, ab initio computations of the vibrational frequencies were carried out using the Gaussian 09 program followed by the full optimizations done using Density Functional Theory (DFT) at B3LYP/6-311 G(d,p) level. The combined use of experiments and computations allowed a firm assignment of the majority of observed bands for the compound. The calculated stretching frequencies have been found to be in good agreement with the experimental frequencies. The electronic and charge transfer properties have been explained on the basis of highest occupied molecular orbitals (HOMOs), lowest unoccupied molecular orbitals (LUMOs) and density of states (DOS). The absorption spectra have been computed by using time dependent density functional theory (TD-DFT). 1H and 13C NMR spectra were recorded and 1H and 13C NMR chemical shifts of the molecule were calculated using the gauge independent atomic orbital (GIAO) method. From the optimized geometry of the molecule, molecular electrostatic potential (MEP) distribution, frontier molecular orbitals (FMOs) of the title compound have been calculated in the ground state theoretically. The theoretical results showed good agreement with the experimental values.

  15. Conformational stability, molecular structure, vibrational, electronic, 1H and 13C spectral analysis of 3-pyridinemethanol using ab-initio/DFT method

    Science.gov (United States)

    Sivaranjani, T.; Periandy, S.; Xavier, S.

    2016-03-01

    The FT-IR and FT-Raman spectra of 3-pyridinemethanol (3PYRM) have been recorded in the regions 4000-400 and 4000-100 cm-1 respectively. The vibrational analysis of 3PYRM was carried out using wavenumbers computed by HF and DFT (B3LYP) methods with 6-311++G (d, p) basis set, along with experimental values. The conformational analyses were performed and the energies of the different possible conformers were determined. The total electron density and MESP surfaces of the molecules were constructed using B3LYP/6-311++G (d, p) method to display nucleophilic and electrophilic region globally. The HOMO and LUMO energies were measured and different reactivity descriptors are discussed the active sites of the molecule. Natural Bond Orbital Analysis is discussed and possible transition are correlated with the electronic transitions. Milliken's net charges and the atomic natural charges are also predicted. The 13C and 1H NMR chemical shifts were computed at the B3LYP/6-311++G (2d, p) level by applying GIAO theory and compared with the experimental spectra recorded using the high resolution of 100 MHz and 400 MHz NMR spectrometer with electromagnetic field strength 9.1T, respectively. The temperature dependence of the thermodynamic properties; heat capacity, entropy and enthalpy for the title compounds were also determined by B3LYP/6-311++G (d, p) method.

  16. High-definition Fourier Transform Infrared (FT-IR) spectroscopic imaging of human tissue sections towards improving pathology.

    Science.gov (United States)

    Sreedhar, Hari; Varma, Vishal K; Nguyen, Peter L; Davidson, Bennett; Akkina, Sanjeev; Guzman, Grace; Setty, Suman; Kajdacsy-Balla, Andre; Walsh, Michael J

    2015-01-21

    High-definition Fourier Transform Infrared (FT-IR) spectroscopic imaging is an emerging approach to obtain detailed images that have associated biochemical information. FT-IR imaging of tissue is based on the principle that different regions of the mid-infrared are absorbed by different chemical bonds (e.g., C=O, C-H, N-H) within cells or tissue that can then be related to the presence and composition of biomolecules (e.g., lipids, DNA, glycogen, protein, collagen). In an FT-IR image, every pixel within the image comprises an entire Infrared (IR) spectrum that can give information on the biochemical status of the cells that can then be exploited for cell-type or disease-type classification. In this paper, we show: how to obtain IR images from human tissues using an FT-IR system, how to modify existing instrumentation to allow for high-definition imaging capabilities, and how to visualize FT-IR images. We then present some applications of FT-IR for pathology using the liver and kidney as examples. FT-IR imaging holds exciting applications in providing a novel route to obtain biochemical information from cells and tissue in an entirely label-free non-perturbing route towards giving new insight into biomolecular changes as part of disease processes. Additionally, this biochemical information can potentially allow for objective and automated analysis of certain aspects of disease diagnosis.

  17. Detection of starch adulteration in onion powder by FT-NIR and FT-IR spectroscopy.

    Science.gov (United States)

    Lohumi, Santosh; Lee, Sangdae; Lee, Wang-Hee; Kim, Moon S; Mo, Changyeun; Bae, Hanhong; Cho, Byoung-Kwan

    2014-09-24

    Adulteration of onion powder with cornstarch was identified by Fourier transform near-infrared (FT-NIR) and Fourier transform infrared (FT-IR) spectroscopy. The reflectance spectra of 180 pure and adulterated samples (1-35 wt % starch) were collected and preprocessed to generate calibration and prediction sets. A multivariate calibration model of partial least-squares regression (PLSR) was executed on the pretreated spectra to predict the presence of starch. The PLSR model predicted adulteration with an R(p)2 of 0.98 and a standard error of prediction (SEP) of 1.18% for the FT-NIR data and an R(p)2 of 0.90 and SEP of 3.12% for the FT-IR data. Thus, the FT-NIR data were of greater predictive value than the FT-IR data. Principal component analysis on the preprocessed data identified the onion powder in terms of added starch. The first three principal component loadings and β coefficients of the PLSR model revealed starch-related absorption. These methods can be applied to rapidly detect adulteration in other spices.

  18. Identification of species' blood by attenuated total reflection (ATR) Fourier transform infrared (FT-IR) spectroscopy.

    Science.gov (United States)

    Mistek, Ewelina; Lednev, Igor K

    2015-09-01

    Blood is one of the most common and informative forms of biological evidence found at a crime scene. A very crucial step in forensic investigations is identifying a blood stain's origin. The standard methods currently employed for analyzing blood are destructive to the sample and time-consuming. In this study, attenuated total reflection (ATR) Fourier transform infrared (FT-IR) spectroscopy is used as a confirmatory, nondestructive, and rapid method for distinction between human and animal (nonhuman) blood. Partial least squares-discriminant analysis (PLS-DA) models were built and demonstrated complete separation between human and animal donors, as well as distinction between three separate species: human, cat, and dog. Classification predictions of unknown blood donors were performed by the model, resulting in 100 % accuracy. This study demonstrates ATR FT-IR spectroscopy's great potential for blood stain analysis and species discrimination, both in the lab and at a crime scene since portable ATR FT-IR instrumentation is commercially available.

  19. The detection and discrimination of human body fluids using ATR FT-IR spectroscopy.

    Science.gov (United States)

    Orphanou, Charlotte-Maria; Walton-Williams, Laura; Mountain, Harry; Cassella, John

    2015-07-01

    Blood, saliva, semen and vaginal secretions are the main human body fluids encountered at crime scenes. Currently presumptive tests are routinely utilised to indicate the presence of body fluids, although these are often subject to false positives and limited to particular body fluids. Over the last decade more sensitive and specific body fluid identification methods have been explored, such as mRNA analysis and proteomics, although these are not yet appropriate for routine application. This research investigated the application of ATR FT-IR spectroscopy for the detection and discrimination of human blood, saliva, semen and vaginal secretions. The results demonstrated that ATR FT-IR spectroscopy can detect and distinguish between these body fluids based on the unique spectral pattern, combination of peaks and peak frequencies corresponding to the macromolecule groups common within biological material. Comparisons with known abundant proteins relevant to each body fluid were also analysed to enable specific peaks to be attributed to the relevant protein components, which further reinforced the discrimination and identification of each body fluid. Overall, this preliminary research has demonstrated the potential for ATR FT-IR spectroscopy to be utilised in the routine confirmatory screening of biological evidence due to its quick and robust application within forensic science.

  20. Applications of FT-IR spectrometry to plasma contents analysis and monitoring

    Science.gov (United States)

    Deleris, Gerard Y. R.; Petibois, Cyril

    2002-03-01

    We devoted efforts to develop an analytical method of plasma able to provide both a high sensitivity and a global overview of its biomolecular contents along with the variations of these ones. Among candidates, transmittance FT-IR spectrometry has proved to be highly efficient. It has been used to analyze plasma micro samples using an iterative process. Results in accordance with clinical data were obtained from a single FT-IR spectrum for the following biomolecules: amino-acids, fatty acids, albumin, glucose, fibrinogen, lactate, triglycerides, glycerol, urea, (alpha) 1-antitrypsin, alpha2-macroglobulin, transferin, Apo-A1, Apo-B, Apo-C3, IgA, IgD, IgG1, IgG2, IgG3, IgG4, IgM, haptoglobin, and (alpha) 1-acid glycoprotein. Moreover, cholesterol contribution may be determined on the same IR spectrum. Therefore, as only micro samples are necessary, high frequency blood analysis become available. This method was used to monitor inflammatory processes related to given metabolic stresses. Moreover, FT-IR spectrum constitutes a 'metabolic photography' of the subject, allowing classification between metabolic groups (pathologic or others). It was used on difference spectra in order to raise 'signal to noise' ratio by elimination of the unvarying spectral contribution. Among others, it allowed to uncover overtraining in high-level sportsmen several weeks before any physiologic or clinical symptom occurred.

  1. Final technical report. In-situ FT-IR monitoring of a black liquor recovery boiler

    Energy Technology Data Exchange (ETDEWEB)

    James Markham; Joseph Cosgrove; David Marran; Jorge Neira; Chad Nelson; Peter Solomon

    1999-05-31

    This project developed and tested advanced Fourier transform infrared (FT-IR) instruments for process monitoring of black liquor recovery boilers. The state-of-the-art FT-IR instruments successfully operated in the harsh environment of a black liquor recovery boiler and provided a wealth of real-time process information. Concentrations of multiple gas species were simultaneously monitored in-situ across the combustion flow of the boiler and extractively at the stack. Sensitivity to changes of particulate fume and carryover levels in the process flow were also demonstrated. Boiler set-up and operation is a complex balance of conditions that influence the chemical and physical processes in the combustion flow. Operating parameters include black liquor flow rate, liquor temperature, nozzle pressure, primary air, secondary air, tertiary air, boiler excess oxygen and others. The in-process information provided by the FT-IR monitors can be used as a boiler control tool since species indicative of combustion efficiency (carbon monoxide, methane) and pollutant emissions (sulfur dioxide, hydrochloric acid and fume) were monitored in real-time and observed to fluctuate as operating conditions were varied. A high priority need of the U.S. industrial boiler market is improved measurement and control technology. The sensor technology demonstrated in this project is applicable to the need of industry.

  2. [Study on the interaction of DNA and norfloxacin by FT-Raman].

    Science.gov (United States)

    Ren, Yi-Hua; Zhou, Guang-Ming; Wu, Jie; Yu, Dan-Ni

    2009-11-01

    FT-Raman and surface enhanced Raman spectra (SERS) of norfloxacin and norfloxacin capsule on the silver colloidal substrate were recorded, and the vibrational and enhanced peaks were assigned; interactions of norfloxacin and DNA were researched. The experimental results proved that the characteristic vibrations of capsule's content and NFX standard, which is v(C-F), vs(O-C-O), v(C=C), did not change, while the changes in molecular skeleton's vibrations were substantial. Additives do not affect the Raman spectroscopy of norfloxacin substantively. An analytical method for detecting norfloxacin medcine can be established by FT-Raman. Without any ions, the interaction is mainly caused by the inserting-action mode between the ring of norfloxacin and the double helix structure of DNA, and norfloxacin could interact with DNA directly, providing reliable evidence for antibacterial mechanism of quinoxalone antibiotics.

  3. FT-RAMAN SPECTROSCOPY FOR MONITORING THE POLYMERIZATION OF ACRYLIC ACID IN AQUEOUS SOLUTION

    Institute of Scientific and Technical Information of China (English)

    Jiang Yu; Hui-zhou Liu; Jia-yong Chen

    1999-01-01

    FT-Raman spectroscopy was used to monitor the polymerization of acrylic acid in aqueous solution. A simple method to avoid the noise in the background during the signal processing via Fourier transformation was used in this work. The effects of the amount of initiator used on the polymerization are studied. When the amount of the initiator in the polymerization was increased, both the rate and extent of polymerization of acrylic acid will be increased.

  4. SYNTHESIS, SPECTRAL AND THEORETICAL CHARACTERIZATION OF 5,6-DICHLORO/DIMETHYL-2-(2´,3´/2´,4´/2´,5´/3´,4´/3´,5´-DIMETHOXYPHENYL-1H-BENZIMIDAZOLES

    Directory of Open Access Journals (Sweden)

    Demet Gürbüz

    2016-12-01

    Full Text Available 5,6-Dichloro/dimethyl-2-(2´,3´/2´,4´/2´,5´/3´,4´/3´,5´-dimethoxyphenyl-1H-benzimidazoles were synthesized and characterized by using analytical data, FT-IR, FT-Raman, NMR, ESI-MS and fl uorescence spectroscopy. The optimized molecular geometry, zero point energy, dipole moment, ESE, band gap and charge distributions were calculated by Gaussian 09 using Density Functional Theory (DFT, RB3LYP with 6-31++G(d,p basis set. According to the calculations, the molecules have structures with various torsion angles between the benzimidazole and benzene rings from 9.7º to 47.8º. The calculated energy values with ZPE correction and DFT show that the methyl derivatives are more stable than the chloro forms. 3´,4´-Dimethoxy derivatives have higher decomposition points in comparison with the other compounds in series. The chlorine atoms of 5,6-dichloro-2- (2´,3´/2´,4´/2´,5´/3´,4´/3´,5´-dimethoxyphenyl-1H-benzimidazoles are positively charged whereas the C5 and C6 carbon atoms are negatively charged due to the attached chlorine atoms, in virtue of the electron withdrawing characteristic of the imidazole part of the benzimidazole ring. Also, some calculated prominent bond lengths and bond angles were discussed.

  5. DIFERENCIACIÓN DE ESPECIE MICOBACTERIANA POR FT-IR (ESPECTROSCOPIA INFRARROJA CON TRANSFORMADA DE FOURIER Differentiation of Mycobacterial Species by FT-IR (Fourier Transform Infrared Spectroscopy

    Directory of Open Access Journals (Sweden)

    JORGE ANDRÉS CUÉLLAR GIL

    2011-08-01

    Full Text Available Se trabajó con espectroscopía infrarroja transformada de Fourier (FT-IR para diferenciar diez especies de micobacterias. Mycobacterium intracelullare y M. fortuitum (ATCC, M. flavensces, M. smegmatis, M. chelone, M. gordonae, M. triviale, M. vaccae, M. terrae y M. nonchromogenicum (IP. Como control de diferenciación de género se incluyó Staphylococcus aureus, Streptococcus viridans y Streptococcus pyogenes, Klebsiella pneumoniae y Escherichia coli, cada especie se corrió por triplicado en KBr y ATR. Los espectros se analizaron según el método de diferenciación de componentes principales, y se realizaron derivadas de primer orden (D1 en modalidad de transmisión usando la pastilla de KBr y la base ATR, además se diseñó una biblioteca espectral con la primera derivada de ATR. La sensibilidad de detección fue de 100% al trabajar con KBr y el nivel de diferenciación fue de 100% en tres de cuatro muestras problema.Spectroscopy Fourier Transform infrared (FT-IR was used to differentiate 10 species of mycobacteria. Mycobacterium intracelullare and M. fortuitum (ATCC. M. flavensces, M. smegmatis, M. chelone, M. gordonae, M. triviale, M. vaccae, M. terrae and M. nonchromogenicum (IP. For gender differentiation Staphylococcus aureus, Streptococcus viridans and Streptococcus pyogenes, Klebsiella pneumoniae y Escherichia coli were incluided as controls, each species was run for triplicate in KBr and ATR. The spectra were analyzed with the method of principal components to make the first derivatives of first order (D1 in the transmission mode using KBr pellet and ATR base, and a spectral library of the first derivative of ATR was kept. The detection sensitivity was 100% with KBr and the level of differentiation was 100% in three of the four samples problems.

  6. Development of an inverted NIR-FT-Raman microscope for biomedical applications

    Science.gov (United States)

    Dippel, B.; Tatsch, E.; Schrader, B.

    1997-06-01

    NIR-FT-Raman spectroscopy is the most suitable tool for investigation of biological samples, because the fluorescence of organic substances is reduced to a minimum. To examine the applicability of NIR excited FT-Raman spectroscopy to the study of cell cultures and tissues, measurements were made with an inverted Raman microscope, a modified Zeiss Axiovert 135. This system allows the collection of Raman spectra both by Koehler laser illumination and the confocal principle: • Koehler laser illumination avoids overheating and denaturation of the sample because the exciting laser beam illuminates the sample as an unfocused collimated beam. An integrative collection over the whole image of the microscope objective is necessary to increase the Raman light flux. • The confocal arrangement allows high spatial resolution which is reached by selective collection of the Raman scattering of details of the sample. A larger spatial resolution leads to a decreased light flux of the Raman scattering, this is compensated by a focused laser beam. We have used NIR-FT-Raman spectroscopy to investigate the spectra of normal breast tissues, potentially useful in the diagnosis of cancer.

  7. Combined experimental and theoretical studies on the molecular structures, spectroscopy, and inhibitor activity of 3-(2-thienyl)acrylic acid through AIM, NBO,FT-IR, FT-Raman, UV and HOMO-LUMO analyses, and molecular docking

    Science.gov (United States)

    Issaoui, N.; Ghalla, H.; Bardak, F.; Karabacak, M.; Aouled Dlala, N.; Flakus, H. T.; Oujia, B.

    2017-02-01

    In this work, the molecular structures and vibrational spectral analyses of 3-(2-Theinyl)acrylic acid (3-2TAA) monomer and dimer structures have been reported by using density functional theory calculations at B3LYP/6-311++G(d,p) level of theory. The complete assignments of the fundamental vibrational modes were obtained using potential energy distribution. Intermolecular interactions were analyzed by orbital NBO and topological AIM approaches. The electronic properties have been carried out using TD-DFT approach. Great agreements between experimental and theoretical values were achieved throughout the analysis of structural parameters and spectroscopic features. Inhibitor characteristics on human monoamine oxidase B (MAOB) enzyme of two determined stable conformers of 3-2TAA (β and γ) along with four selective inhibitors, namely safinamide, a coumarin analogue, farnesol, and phenyethylhydrazine were investigated via molecular docking. Moreover, molecular electrostatic potential (MEP) and temperature dependency of thermodynamic functions have been reported.

  8. Spectroscopic (FT-IR, FT-Raman and UV-Visible) investigations, NMR chemical shielding anisotropy (CSA) parameters of 2,6-Diamino-4-chloropyrimidine for dye sensitized solar cells using density functional theory.

    Science.gov (United States)

    Gladis Anitha, E; Joseph Vedhagiri, S; Parimala, K

    2015-02-05

    The molecular structure, geometry optimization, vibrational frequencies of organic dye sensitizer 2,6-Diamino-4-chloropyrimidine (DACP) were studied based on Hartree-Fock (HF) and density functional theory (DFT) using B3LYP methods with 6-311++G(d,p) basis set. Ultraviolet-Visible (UV-Vis) spectrum was investigated by time dependent DFT (TD-DFT). Features of the electronic absorption spectrum in the UV-Visible regions were assigned based on TD-DFT calculation. The absorption bands are assigned to transitions. The interfacial electron transfer between semiconductor TiO2 electrode and dye sensitizer DACP is due to an electron injection process from excited dye to the semiconductor's conduction band. The observed and the calculated frequencies are found to be in good agreement. The energies of the frontier molecular orbitals (FMOS) have also been determined. The chemical shielding anisotropic (CSA) parameters are calculated from the NMR analysis, Stability of the molecule arising from hyperconjugative interactions and charge delocalization has been analyzed using natural bond orbital (NBO) analysis. Copyright © 2014 Elsevier B.V. All rights reserved.

  9. Experimental (FT-IR and FT-Raman) and theoretical (HF and DFT) investigation, NMR, NBO, electronic properties and frequency estimation analyses on 2,4,5-trichlorobenzene sulfonyl chloride

    Science.gov (United States)

    Gayathri, R.; Arivazhagan, M.

    2012-11-01

    The present work deals with the structural, electronic, and vibrational analyses of the biomolecule 2,4,5-trichlorobenzene sulfonyl chloride (TCBSC). TCBSC is a novel pharmaceutical compound used in dyes, pesticides, pigments, fluorescence brighteners and intermediate for agricultural chemicals in the manufacture of insecticides. Quantum chemical calculation of geometrical structure and energies of TCBSC was carried out by density functional theory (B3LYP) and ab initio (HF) methods at 6-311+G(d,p) and 6-311++G(d,p) standard basis set. The stability of the molecule arising from hyperconjugative interaction and charge delocalization has been analyzed using natural bond orbital (NBO) analysis. NMR analysis shows that the isotropic chemical shifts of carbon and hydrogen atom of TCBSC are giving the reasonable shielding to the molecule. Another interesting property shows nonlinear optical (NLO) behavior. Moreover, we have not only simulated highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) but also determined the transition state and energy band gap.

  10. Vibrational analysis using FT-IR, FT-Raman spectra and HF-DFT methods and NBO, NLO, NMR, HOMO-LUMO, UV and electronic transitions studies on 2,2,4-trimethyl pentane

    Science.gov (United States)

    Suvitha, A.; Periandy, S.; Govindarajan, M.; Gayathri, P.

    2015-03-01

    In this work, the vibrational spectral analysis was carried out by using Raman and infrared spectroscopy in the range 100-4000 cm-1and 50-4000 cm-1, respectively, for 2,2,4-Trimethyl Pentane, TMP (C8H18) molecule. The molecular structure, fundamental vibrational frequencies and intensity of the vibrational bands are interpreted with the aid of structure optimizations and geometrical parameter calculations based on Hartree Fock (HF) and density functional theory (DFT) method with 6-311++G(d,p) basis set. The scaled B3LYP/6-311++G(d,p) results shows the best agreement with the experimental values over the other method. The calculated HOMO and LUMO energies shows that charge transfer within the molecule. The physical reactions of single bond hydrocarbon TMP were investigated. The results of the calculations were applied to simulate spectra of the title compound, which shows the excellent agreement with observed spectra. Besides, Mulliken atomic charges, UV, frontier molecular orbital (FMO), MEP, NLO activity, Natural Bond-Orbital (NBO) analysis, NMR and thermodynamic properties of title molecule were also performed.

  11. NIR-FT Raman, FT-IR and surface-enhanced Raman scattering and DFT based theoretical studies on the adsorption behaviour of (S)-Phenylsuccinic acid on silver nanoparticles

    Indian Academy of Sciences (India)

    D Sajan; V Bena Jothy; Thomas Kuruvilla; I Hubert Joe

    2010-07-01

    Single crystals of ()-phenylsuccinic acid (SPSA) were grown by the slow evaporation technique and vibrational spectral analysis was carried out using near-IR Fourier transform Raman and Fourier transform IR spectroscopy. The density functional theoretical (DFT) computations were also performed at the B3LYP/6-311G(d, p) level to derive the equilibrium geometry, vibrational wavenumbers and intensities. Vibrational spectral investigation confirmed the formation of cyclic dimers in the crystal, with the carboxyl groups of each acid molecule being hydrogen bonded to those of the adjacent molecules. The Raman vibrational wavenumbers of the adsorption geometry of (S)-phenylsuccinic acid (SPSA) on a silver surface have been simulated using DFT-B3PW91 with lanl2dz basis set and it compared with the experimental spectrum. The large enhancement of in-plane bending and ring breathing modes in the surface-enhanced Raman scattering spectrum indicates that the molecule is adsorbed on the silver surface in an `at least vertical’ or slightly tilted orientation, with the ring perpendicular to the silver surface. The calculated vibrational spectra are in agreement with experimental values confirming the validity of the proposed adsorption configurations.

  12. Structure analysis and spectroscopic characterization of 2-Fluoro-3-Methylpyridine-5-Boronic Acid with experimental (FT-IR, Raman, NMR and XRD) techniques and quantum chemical calculations

    Science.gov (United States)

    Alver, Özgür; Dikmen, Gökhan

    2016-03-01

    Possible stable conformers, geometrical molecular structures, vibrational properties as well as band assignments, nuclear magnetic shielding tensors of 2-Fluoro-3-Methylpyridine-5-Boronic Acid (2F3MP5BA) were studied experimentally and theoretically using FT-IR, Raman, (CP/MAS) NMR and XRD spectroscopic methods. FT-IR and Raman spectra were evaluated in the region of 3500-400 cm-1, and 3200-400 cm-1, respectively. The optimized geometric structures, vibrational wavenumbers and nuclear magnetic shielding tensors were examined using Becke-3-Lee-Yang-Parr (B3LYP) hybrid density functional theory method with 6-311++G(d, p) basis set. 1H, 13C NMR chemical shifts were calculated using the gauge invariant atomic orbital (GIAO) method. 1H, 13C, APT and HETCOR NMR experiments of title molecule were carried out in DMSO solution. 13C CP/MAS NMR measurement was done with 4 mm zirconium rotor and glycine was used as an external standard. Single crystal of 2F3MP5BA was also prepared for XRD measurements. Assignments of vibrational wavenumbers were also strengthened by calculating the total energy distribution (TED) values using scaled quantum mechanical (SQM) method.

  13. Mineralogical Characterization Studies on Unburnt Ceramic Product Made from Rock Residue Additives by Ft-Ir Spectroscopic Technique

    Science.gov (United States)

    Vijayaragavan, R.; Mullainathan, S.; Balachandramohan, M.; Krishnamoorthy, N.; Nithiyanantham, S.; Murugesan, S.; Vanathi, V.

    2013-10-01

    The usability of waste rock (rock residue) powder as an additive material in ceramic samples was investigated. Qualitative analysis was carried out to determine the major and minor constituent minerals present in ceramic bodies made from rock residue powder by using FT-IR spectroscopic technique. Further, the representative ceramic bodies are analyzed by FT-IR technique to yield more information about the functional groups and also to estimate the order or disorder of kaolinite structure.

  14. FT-IR Analysis of Urinary Stones: A Helpful Tool for Clinician Comparison with the Chemical Spot Test

    Directory of Open Access Journals (Sweden)

    Aniello Primiano

    2014-01-01

    Full Text Available Background. Kidney stones are a common illness with multifactorial etiopathogenesis. The determination of crystalline and molecular composition and the quantification of all stone components are important to establish the etiology of stones disease but it is often laborious to obtain using the chemical method. The aim of this paper is to compare chemical spot test with FT-IR spectroscopy, for a possible introduction in our laboratory. Methods. We analyzed 48 calculi using Urinary Calculi Analysis kit in accordance with the manufacturer’s instructions. The same samples were analyzed by FT-IR using the Perkin Elmer Spectrum One FT-IR Spectrometer. All FT-IR spectra of kidney stones were then computer matched against a library of spectra to generate a report on the various components. Results. On the basis of FT-IR analysis, the 48 calculi were divided into three groups: pure stone, mixed stone, and pure stone with substances in trace. Results of each group were compared with those obtained with chemical spot test. A general disagreement between methods was observed. Conclusions. According to our data, the introduction of the FT-IR technique in clinical chemistry laboratory may be more responsive to clinician expectations.

  15. FT-IR Analysis of Urinary Stones: A Helpful Tool for Clinician Comparison with the Chemical Spot Test

    Science.gov (United States)

    Primiano, Aniello; D'Addessi, Alessandro; Cocci, Andrea; Schiattarella, Arcangelo; Zuppi, Cecilia

    2014-01-01

    Background. Kidney stones are a common illness with multifactorial etiopathogenesis. The determination of crystalline and molecular composition and the quantification of all stone components are important to establish the etiology of stones disease but it is often laborious to obtain using the chemical method. The aim of this paper is to compare chemical spot test with FT-IR spectroscopy, for a possible introduction in our laboratory. Methods. We analyzed 48 calculi using Urinary Calculi Analysis kit in accordance with the manufacturer's instructions. The same samples were analyzed by FT-IR using the Perkin Elmer Spectrum One FT-IR Spectrometer. All FT-IR spectra of kidney stones were then computer matched against a library of spectra to generate a report on the various components. Results. On the basis of FT-IR analysis, the 48 calculi were divided into three groups: pure stone, mixed stone, and pure stone with substances in trace. Results of each group were compared with those obtained with chemical spot test. A general disagreement between methods was observed. Conclusions. According to our data, the introduction of the FT-IR technique in clinical chemistry laboratory may be more responsive to clinician expectations. PMID:24868112

  16. Evaluation of Polymerization Efficacy in Composite Resins via FT-IR Spectroscopy and Vickers Microhardness Test.

    Science.gov (United States)

    Jafarzadeh, Tahereh-Sadat; Erfan, Mohammad; Behroozibakhsh, Marjan; Fatemi, Mostafa; Masaeli, Reza; Rezaei, Yashar; Bagheri, Hossein; Erfan, Yasaman

    2015-01-01

    Background and aims. Polymerization efficacy affects the properties and performance of composite resin restorations.The purpose of this study was to evaluate the effectiveness of polymerization of two micro-hybrid, two nano-hybrid and one nano-filled ormocer-based composite resins, cured by two different light-curing systems, using Fourier transformation infrared (FT-IR) spectroscopy and Vickers microhardness testing at two different depths (top surface, 2 mm). Materials and methods. For FT-IR spectrometry, five cylindrical specimens (5mm in diameter × 2 mm in length) were prepared from each composite resin using Teflon molds and polymerized for 20 seconds. Then, 70-μm wafers were sectioned at the top surface and at2mm from the top surface. The degree of conversion for each sample was calculated using FT-IR spectroscopy. For Vickers micro-hardness testing, three cylindrical specimens were prepared from each composite resin and polymerized for 20 seconds. The Vickers microhardness test (Shimadzu, Type M, Japan) was performed at the top and bottom (depth=2 mm) surfaces of each specimen. Three-way ANOVA with independent variables and Tukey tests were performed at 95% significance level. Results. No significant differences were detected in degree of conversion and microhardness between LED and QTH light-curing units except for the ormocer-based specimen, CeramX, which exhibited significantly higher DC by LED. All the composite resins showed a significantly higher degree of conversion at the surface. Microhardness was not significantly affected by depth, except for Herculite XRV Ultra and CeramX, which showed higher values at the surface. Conclusion. Composite resins containing nano-particles generally exhibited more variations in degree of conversion and microhardness.

  17. Evaluation of Polymerization Efficacy in Composite Resins via FT-IR Spectroscopy and Vickers Microhardness Test

    Science.gov (United States)

    Jafarzadeh, Tahereh-Sadat; Erfan, Mohammad; Behroozibakhsh, Marjan; Fatemi, Mostafa; Masaeli, Reza; Rezaei, Yashar; Bagheri, Hossein; Erfan, Yasaman

    2015-01-01

    Background and aims. Polymerization efficacy affects the properties and performance of composite resin restorations.The purpose of this study was to evaluate the effectiveness of polymerization of two micro-hybrid, two nano-hybrid and one nano-filled ormocer-based composite resins, cured by two different light-curing systems, using Fourier transformation infrared (FT-IR) spectroscopy and Vickers microhardness testing at two different depths (top surface, 2 mm). Materials and methods. For FT-IR spectrometry, five cylindrical specimens (5mm in diameter × 2 mm in length) were prepared from each composite resin using Teflon molds and polymerized for 20 seconds. Then, 70-μm wafers were sectioned at the top surface and at2mm from the top surface. The degree of conversion for each sample was calculated using FT-IR spectroscopy. For Vickers micro-hardness testing, three cylindrical specimens were prepared from each composite resin and polymerized for 20 seconds. The Vickers microhardness test (Shimadzu, Type M, Japan) was performed at the top and bottom (depth=2 mm) surfaces of each specimen. Three-way ANOVA with independent variables and Tukey tests were performed at 95% significance level. Results. No significant differences were detected in degree of conversion and microhardness between LED and QTH light-curing units except for the ormocer-based specimen, CeramX, which exhibited significantly higher DC by LED. All the composite resins showed a significantly higher degree of conversion at the surface. Microhardness was not significantly affected by depth, except for Herculite XRV Ultra and CeramX, which showed higher values at the surface. Conclusion. Composite resins containing nano-particles generally exhibited more variations in degree of conversion and microhardness. PMID:26889359

  18. Spatial metabolic fingerprinting using FT-IR spectroscopy: investigating abiotic stresses on Micrasterias hardyi.

    Science.gov (United States)

    Patel, Soyab A; Currie, Felicity; Thakker, Nalin; Goodacre, Royston

    2008-12-01

    The release of active pharmaceutical ingredients (APIs) into the environment is an ecologically important topic for study because, whilst APIs have been designed to have a wide range of biological properties for the target of interest (usually in man), little information on potential ecological risks is currently available regarding their effects on the organisms that inhabit the environment. In this study, the algae Micrasterias hardyi was exposed to propranolol, metoprolol (beta-adrenergic receptor agonist drugs) and mefenamic acid (a non steroidal anti-inflammatory drug), at concentrations ranging between 0.002-0.2 mM. Initial studies showed that Fourier transform infrared (FT-IR) spectroscopy on algal homogenates illustrated that all three APIs had a quantitative effect on the metabolism of the organisms and it was possible to estimate the level of API exposure from the FT-IR metabolic fingerprints using partial least squares (PLS) regression. From the inspection of the PLS loadings matrices it was possible to elucidate that all drugs caused effects on protein and lipid levels. Most strikingly propranolol had significant effects on the lipid components of the cell. These were dramatically reduced possibly as a consequence of loss of membrane integrity. In order to investigate this further, FT-IR microspectroscopy was used to generate detailed metabolic fingerprinting maps. These chemical maps revealed that all the drugs had a dramatic effect on the distribution of various chemical species throughout the algae, and that all drugs had an affect on protein and lipid levels. In particular, as noted in the PLS analyses for propranolol treated cells, the lipid complement found in the lipid storage areas in the processes of M. hardyi was greatly reduced. This illustrates the power of spatial metabolic fingerprinting for investigating abiotic stresses on complex biological species.

  19. Evaluation of Polymerization Efficacy in Composite Resins via FT-IR Spectroscopy and Vickers Microhardness Test

    Directory of Open Access Journals (Sweden)

    Tahereh-Sadat Jafarzadeh

    2015-12-01

    Full Text Available Background and aims. Polymerization efficacy affects the properties and performance of composite resin restorations.The purpose of this study was to evaluate the effectiveness of polymerization of two micro-hybrid, two nano-hybrid and one nano-filled ormocer-based composite resins, cured by two different light-curing systems, using Fourier transformation infrared (FT-IR spectroscopy and Vickers microhardness testing at two different depths (top surface, 2 mm. Materials and methods. For FT-IR spectrometry, five cylindrical specimens (5mm in diameter × 2 mm in length were prepared from each composite resin using Teflon molds and polymerized for 20 seconds. Then, 70-μm wafers were sectioned at the top surface and at2mm from the top surface. The degree of conversion for each sample was calculated using FT-IR spectroscopy. For Vickers micro-hardness testing, three cylindrical specimens were prepared from each composite resin and polymerized for 20 seconds. The Vickers microhardness test (Shimadzu, Type M, Japan was performed at the top and bottom (depth=2 mm surfaces of each specimen. Three-way ANOVA with independent variables and Tukey tests were performed at 95% significance level. Results. No significant differences were detected in degree of conversion and microhardness between LED and QTH light-curing units except for the ormocer-based specimen, CeramX, which exhibited significantly higher DC by LED. All the composite resins showed a significantly higher degree of conversion at the surface. Microhardness was not significantly affected by depth, except for Herculite XRV Ultra and CeramX, which showed higher values at the surface. Conclusion. Composite resins containing nano-particles generally exhibited more variations in degree of conversion and microhardness.

  20. Utility of FT-IR imaging spectroscopy in estimating differences between the quality of bovine blastocysts

    Science.gov (United States)

    Wiecheć, A.; Opiela, J.; Lipiec, E.; Kwiatek, W. M.

    2013-10-01

    This study was conducted to verify whether the FT-IR spectroscopy and Focal Plane Array (FPA) imaging can be successfully applied to estimate the quality of bovine blastocysts (on the basis of the concentration of nucleic acids and amides). The FT-IR spectra of inner cell mass from blastocysts of three different culture systems were examined. The spectral changes between blastocysts were analyzed in DNA (spectral range of 1240-950 cm-1) and protein amides (1800-1400 cm-1). Blastocyst 1 (BL1-HA) was developed from the fertilized oocyte cultured with low concentration of hialuronian (HA), Blastocyst 2 and 3 were developed from the oocytes cultured in standard conditions. Cleavage stage blastocyst 2 (BL2-SOF) has been cultured in SOF medium while blastocyst 3 (BL3-VERO) was cultured in co-culture with VERO cells. The multivariate statistical analysis (Hierarchical Cluster Analysis - HCA and Principal Component Analysis - PCA) of single cells spectra showed high similarity of cells forming the inner cell mass within single blastocyst. The main variance between the three examined blastocysts was related to amides bands. Differences in the intensities of the amides' peaks between the bovine blastocysts derived from different culture systems indicated that specific proteins reflecting the appearance of a new phenotype were produced. However, for the three blastocysts, the α-helix typical peak was twice more intensive than the β-sheet typical peak suggesting that the differentiation processes had been started. Taking into account the quantitative and qualitative composition of the protein into examined blastocysts, it can be assumed, that the quality of the BL1-HA turned out much more similar to BL3-VERO than to BL2-SOF. FT-IR spectroscopy can be successfully applied in reproductive biology research for quality estimation of oocytes and embryos at varied stages of their development. Moreover this technique proved to be particularly useful when the quantity of the

  1. Using FT-IR Spectroscopy to Elucidate the Structures of Ablative Polymers

    Science.gov (United States)

    Fan, Wendy

    2011-01-01

    The composition and structure of an ablative polymer has a multifaceted influence on its thermal, mechanical and ablative properties. Understanding the molecular level information is critical to the optimization of material performance because it helps to establish correlations with the macroscopic properties of the material, the so-called structure-property relationship. Moreover, accurate information of molecular structures is also essential to predict the thermal decomposition pathways as well as to identify decomposition species that are fundamentally important to modeling work. In this presentation, I will describe the use of infrared transmission spectroscopy (FT-IR) as a convenient tool to aid the discovery and development of thermal protection system materials.

  2. FT-IR spectroscopic analysis for studying Clostridium cell response to conversion of enzymatically hydrolyzed hay

    Science.gov (United States)

    Grube, Mara; Gavare, Marita; Nescerecka, Alina; Tihomirova, Kristina; Mezule, Linda; Juhna, Talis

    2013-07-01

    Grass hay is one of assailable cellulose containing non-food agricultural wastes that can be used as a carbohydrate source by microorganisms producing biofuels. In this study three Clostridium strains Clostridium acetobutylicum, Clostridium beijerinckii and Clostridium tetanomorphum, capable of producing acetone, butanol and ethanol (ABE) were adapted to convert enzymatically hydrolyzed hay used as a growth media additive. The results of growth curves, substrate degradation kinetics and FT-IR analyses of bacterial biomass macromolecular composition showed diverse strain-specific cell response to the growth medium composition.

  3. DETERMINATION OF OXALATE ION DOPANT LEVEL IN POLYPYRROLE USING FT-IR.

    Science.gov (United States)

    Miller, Eric T; Benally, Kristal J; GreyEyes, Shawn D; McKenzie, Jason T

    A pellet method using standard addition and FT-IR was used to estimate oxalate ion doping levels in electrosynthesized polypyrrole. The method is useful for materials where removal of analyte from an insoluble material is problematic. Here, electrosynthesized oxalate doped polypyrrole is dispersed in potassium bromide. Spikes of sodium oxalate are added and the mixtures pressed into pellets. The oxalate carbonyl absorption peak is then used to quantify the amount of oxalate present in the polypyrrole. The mass fraction of oxalate dopant in polypyrrole was determined to be 0.4 ± 0.1 % and coincides with the original synthesis solution composition.

  4. Authenticity study of Phyllanthus species by NMR and FT-IR Techniques coupled with chemometric methods

    Directory of Open Access Journals (Sweden)

    Maiara S. Santos

    2012-01-01

    Full Text Available The importance of medicinal plants and their use in industrial applications is increasing worldwide, especially in Brazil. Phyllanthus species, popularly known as "quebra-pedras" in Brazil, are used in folk medicine for treating urinary infections and renal calculus. This paper reports an authenticity study, based on herbal drugs from Phyllanthus species, involving commercial and authentic samples using spectroscopic techniques: FT-IR, ¹H HR-MAS NMR and ¹H NMR in solution, combined with chemometric analysis. The spectroscopic techniques evaluated, coupled with chemometric methods, have great potential in the investigation of complex matrices. Furthermore, several metabolites were identified by the NMR techniques.

  5. Miniature FT-IR Spectrometer For Industrial On-Line Applications

    Science.gov (United States)

    Herrala, Esko; Niemela, Pentti; Hannula, Tapio

    1989-12-01

    There have been made some attempts to transfer the advantages of FT-IR to industrial use. Commercially available research grade instruments have traditionally been large and rather expensive. However, in many potential applications only medium resolution is required, especially when measuring liquid or solid samples. This means that the mirror displacement in a Michelson interferometer remains short and computation of the Fourier transform can be executed by a small computer. Medium resolution gives also other advantages in designing a spectrometer; simple source and detector optics, less severe requirements for mirror transport, and a small size.

  6. Human and Bovine Dentin Composition and Its Hybridization Mechanism Assessed by FT-Raman Spectroscopy

    OpenAIRE

    L. E. S. Soares; A. D. F. Campos; Martin, A. A.

    2013-01-01

    FT-Raman spectroscopy was used to study the human and bovine dentin and their interactions with adhesive systems. Ten human (H) molars and ten bovine (B) teeth were prepared exposing the dentin and then each specimen was divided into two parts. The resulted forty dentin segments were treated either with the total-etch one bottle adhesive (Prime & Bond 2.1, PB) or with the single-step self-etching adhesive (Xeno III, X) and divided into four groups: HPB (control), HX, BPB, and BX. Each group w...

  7. FT-IR Study of Carbon Nanotube Supported Co-Mo Catalysts

    Institute of Scientific and Technical Information of China (English)

    Hongyan Shang; Chenguang Liu1; Fei Wei

    2004-01-01

    In this paper, adsorption properties of dibenzothiophene (DBT) on carbon nanotube, carbon nanotube supported oxide state and sulfide state CoMo catalysts are studied by using thermal gravimetric analysis (TGA) technique and FT-IR spectroscopy. Activated carbon support, γ-Al2O3 support and supported CoMo catalysts are also subjected to studies for comparison. It was found that sulfide state CoMoS/MWCNT, CoMoS/AC and CoMoS/γ-Al2O3 catalysts adsorbed much more DBT molecules than their corresponding oxide state catalysts, as well as their corresponding supports. The chemically adsorbed DBT aromatic molecules did not undergo decomposition on the surface of supports, supported oxide state CoMo catalysts and sulfide state CoMo catalysts when out-gassing at 373 K. FT-IR results indicated that DBT molecules mainly stand upright on the active sites (acid sites and/or transition active phases) of CoMoS/MWCNT catalyst. However, DBT aromatic molecules mainly lie flat on MWCNT and CoMoO/MWCNT.

  8. Quantitative determination of pulegone in pennyroyal oil by FT-IR spectroscopy.

    Science.gov (United States)

    Petrakis, Eleftherios A; Kimbaris, Athanasios C; Pappas, Christos S; Tarantilis, Petros A; Polissiou, Moschos G

    2009-11-11

    Pulegone constitutes a monoterpene occurring in Mentha species and primarily in Mentha pulegium L. (pennyroyal). A major source of human exposure to pulegone is the use of pennyroyal essential oil in flavorings, confectionery and cosmetics. The rapid quantification of pulegone in hydrodistilled pennyroyal oils (which were also "spiked" to increase the validation range) by Fourier transform infrared spectroscopy (FT-IR) combined with partial least-squares (PLS) regression was evaluated, using the spectral region 1650-1260 cm(-1). Gas chromatography was applied as the reference method for pennyroyal oil samples, which ranged in pulegone content from 157 to 860 mg/mL. The two methods were subjected to statistical tests and proved equivalent in terms of accuracy and reproducibility (99% confidence level). The use of FT-IR spectroscopy could offer a viable alternative to the standard analysis procedures presently applied for quantification of valuable plant substances and could also provide the processing industry with a simple and high-throughput technique for the fast quality check of incoming raw materials such as pennyroyal oils.

  9. The Application of FT-IR Spectroscopy for Quality Control of Flours Obtained from Polish Producers

    Science.gov (United States)

    Ceglińska, Alicja; Reder, Magdalena; Ciemniewska-Żytkiewicz, Hanna

    2017-01-01

    Samples of wheat, spelt, rye, and triticale flours produced by different Polish mills were studied by both classic chemical methods and FT-IR MIR spectroscopy. An attempt was made to statistically correlate FT-IR spectral data with reference data with regard to content of various components, for example, proteins, fats, ash, and fatty acids as well as properties such as moisture, falling number, and energetic value. This correlation resulted in calibrated and validated statistical models for versatile evaluation of unknown flour samples. The calibration data set was used to construct calibration models with use of the CSR and the PLS with the leave one-out, cross-validation techniques. The calibrated models were validated with a validation data set. The results obtained confirmed that application of statistical models based on MIR spectral data is a robust, accurate, precise, rapid, inexpensive, and convenient methodology for determination of flour characteristics, as well as for detection of content of selected flour ingredients. The obtained models' characteristics were as follows: R2 = 0.97, PRESS = 2.14; R2 = 0.96, PRESS = 0.69; R2 = 0.95, PRESS = 1.27; R2 = 0.94, PRESS = 0.76, for content of proteins, lipids, ash, and moisture level, respectively. Best results of CSR models were obtained for protein, ash, and crude fat (R2 = 0.86; 0.82; and 0.78, resp.). PMID:28243483

  10. FT-IR microspectroscopy in rapid identification of bacteria in pure and mixed culture

    Science.gov (United States)

    Fontoura, Inglid; Belo, Ricardo; Sakane, Kumiko; Cardoso, Maria Angélica Gargione; Khouri, Sônia; Uehara, Mituo; Raniero, Leandro; Martin, Airton A.

    2010-02-01

    In recent years FT-IR microspectroscopy has been developed for microbiology analysis and applied successfully in pure cultures of microorganisms to rapidly identify strains of bacteria, yeasts and fungi. The investigation and characterization of microorganism mixed cultures is also of growing importance, especially in hospitals where it is common to poly-microbial infections. In this work, the rapid identification of bacteria in pure and mixed cultures was studied. The bacteria were obtained from the Institute Oswaldo Cruz culture collection at Brazil. Escherichia coli ATCC 10799 and Staphylococcus aureus ATCC 14456 were analyzed, 3 inoculations were examined in triplicate: Escherichia coli, Staphylococcus aureus and a mixed culture of them. The inoculations were prepared according to McFarland 0.5, incubated at 37 ° C for 6 hours, diluted in saline, placed in the CaF2 window and store for one hour at 50°C to obtain thin film. The measurement was performed by Spectrum Spotlight 400 (Perkin-Elmer) equipment in the range of 4000-900 cm-1, with 32 scans using a transmittance technique with point and image modes. The data were processed (baseline, normalization, calculation of first derivate followed by smoothing with 9 point using a Savitzky-Golay algorithm) and a cluster analysis were done by Ward's algorithm and an excellent discrimination between pure and mixed culture was obtained. Our preliminary results indicate that the FT-IR microspectroscopy associated with cluster analysis can be used to discriminate between pure and mixed culture.

  11. Monitoring wine aging with Fourier transform infrared spectroscopy (FT-IR

    Directory of Open Access Journals (Sweden)

    Basalekou Marianthi

    2015-01-01

    Full Text Available Oak wood has commonly been used in wine aging but recently other wood types such as Acacia and Chestnut, have attracted the interest of the researchers due to their possible positive contribution to wine quality. However, only the use of oak and chestnut woods is approved by the International Enological Codex of the International Organisation of Vine and Wine. In this study Fourier Transform (FT-mid-infrared spectroscopy combined with Discriminant Analysis was used to differentiate wines aged in barrels made from French oak, American oak, Acacia and Chestnut and in tanks with oak chips, over a period of 12 months. Two red (Mandilaria, Kotsifali and two white (Vilana, Dafni native Greek grape varieties where used to produce four wines. The Fourier Transform Infrared (FT-IR spectra of the samples were recorded on a Zinc Selenide (ZnSe window after incubation at 40 °C for 30 min. A complete differentiation of the samples according to both the type of wood used and the contact time was achieved based on their FT-IR spectra.

  12. Development of a method for determination of fatty acid using FT-IR spectroscopy

    Directory of Open Access Journals (Sweden)

    Dimas Augusto Morozin Zaia

    2011-05-01

    Full Text Available In the present paper a new methodology has been developed for determination of fatty acids in biological systems using FT-IR spectroscopy. For this method is not necessary chromophore reagent or pre sample preparation. Palmitic acid was chosen as standard, because it is found in several biological systems. The FT-IR spectrum of palmitic acid showed two absorption bands in the region of 2852 and 2920 cm-1 attributed to CH stretching. The results for these bands showed that the Beer-Lambert Law was followed in wide range of concentration of palmitic acid (14 to 257 mmol L-1. Potassium ferricyanide (K3[Fe(CN6] was used as internal standard. Several interferents were tested and only cholesterol, ferric chloride (higher concentration, mixture of amino acids for the band at 2919 cm-1 (higher concentration and triglyceride could be interferent if they appear in high concentration. Thus, this new methodology has advantage to be not expensive and simple.

  13. FT-IR spectroscopic, thermal analysis of human urinary stones and their characterization

    Science.gov (United States)

    Selvaraju, R.; Raja, A.; Thiruppathi, G.

    2015-02-01

    In the present study, FT-IR, XRD, TGA-DTA spectral methods have been used to investigate the chemical compositions of urinary calculi. Multi-components of urinary calculi such as calcium oxalate, hydroxyl apatite, struvite and uric acid have been studied. The chemical compounds are identified by FT-IR spectroscopic technique. The mineral identification was confirmed by powder X-ray diffraction patterns as compared with JCPDS reported values. Thermal analysis techniques are considered the best techniques for the characterization and detection of endothermic and exothermic behaviors of the urinary stones. The percentages of each hydrate (COM and COD) are present together, in the presences of MAPH or UA. Finally, the present study suggests that the Urolithiasis is significant health problem in children, and is very common in some parts of the world, especially in India. So that present study is so useful and helpful to the scientific community for identification of latest human health problems and their remedies using spectroscopic techniques.

  14. New ultrarapid-scanning interferometer for FT-IR spectroscopy with microsecond time-resolution

    Science.gov (United States)

    Süss, B.; Ringleb, F.; Heberle, J.

    2016-06-01

    A novel Fourier-transform infrared (FT-IR) rapid-scan spectrometer has been developed (patent pending EP14194520.4) which yields 1000 times higher time resolution as compared to conventional rapid-scanning spectrometers. The central element to achieve faster scanning rates is based on a sonotrode whose front face represents the movable mirror of the interferometer. A prototype spectrometer with a time resolution of 13 μs was realized, capable of fully automated long-term measurements with a flow cell for liquid samples, here a photosynthetic membrane protein in solution. The performance of this novel spectrometer is demonstrated by recording the photoreaction of bacteriorhodopsin initiated by a short laser pulse that is synchronized to the data recording. The resulting data are critically compared to those obtained by step-scan spectroscopy and demonstrate the relevance of performing experiments on proteins in solution. The spectrometer allows for future investigations of fast, non-repetitive processes, whose investigation is challenging to step-scan FT-IR spectroscopy.

  15. FT-IR and XRD analysis of coal from Makum coalfield of Assam

    Indian Academy of Sciences (India)

    Binoy K Saikia; R K Boruah; P K Gogoi

    2007-12-01

    High sulphur coal sample from Ledo colliery of Makum coalfield, Assam, India was studied using FT-IR and XRD methods. FT-IR study shows the presence of aliphatic –CH, –CH2 and –CH3 groups, aliphatic C–O–C stretching associated with –OH and –NH stretching vibrations and HCC rocking (single and condensed rings). XRD pattern of the coal shows that it is amorphous in nature. Function of Radial Distribution Analysis (FRDA) indicates that coal is lignite in type and there is no evidence of graphite-like structure. The first maximum in the G() plot of FRDA at = 0.14 nm relates to the aliphatic C–C bond (Type C–CH=CH–C), the second maximum at = 0.25 nm relates to the distance between carbon atoms of aliphatic chains that are located across one carbon atom. The curve intensity profiles obtained from FRDA show quite regular molecular packets for this coal. The coal was found to be lignite in nature.

  16. Cyclohexene Photo-oxidation over Vanadia Catalyst Analyzed by Time Resolved ATR-FT-IR Spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Frei, Heinz; Mul, Guido; Wasylenko, Walter; Hamdy, M. Sameh; Frei, Heinz

    2008-06-04

    Vanadia was incorporated in the 3-dimensional mesoporous material TUD-1 with a loading of 2percent w/w vanadia. The performance in the selective photo-oxidation of liquid cyclohexene was investigated using ATR-FT-IR spectroscopy. Under continuous illumination at 458 nm a significant amount of product, i.e. cyclohexenone, was identified. This demonstrates for the first time that hydroxylated vanadia centers in mesoporous materials can be activated by visible light to induce oxidation reactions. Using the rapid scan method, a strong perturbation of the vanadyl environment could be observed in the selective oxidation process induced by a 458 nm laser pulse of 480 ms duration. This is proposed to be caused by interaction of the catalytic centre with a cyclohexenyl hydroperoxide intermediate. The restoration of the vanadyl environment could be kinetically correlated to the rate of formation of cyclohexenone, and is explained by molecular rearrangement and dissociation of the peroxide to ketone and water. The ketone diffuses away from the active center and ATR infrared probing zone, resulting in a decreasing ketone signal on the tens of seconds time scale after initiation of the photoreaction. This study demonstrates the high potential of time resolved ATR FT-IR spectroscopy for mechanistic studies of liquid phase reactions by monitoring not only intermediates and products, but by correlating the temporal behavior of these species to molecular changes of the vanadyl catalytic site.

  17. In situ FT-IR microscopic study on enzymatic treatment of poplar wood cross-sections.

    Science.gov (United States)

    Gierlinger, Notburga; Goswami, Luna; Schmidt, Martin; Burgert, Ingo; Coutand, Catherine; Rogge, Tilmann; Schwanninger, Manfred

    2008-08-01

    The feasibility of Fourier transform infrared (FT-IR) microscopy to monitor in situ the enzymatic degradation of wood was investigated. Cross-sections of poplar wood were treated with cellulase Onozuka RS within a custom-built fluidic cell. Light-optical micrographs and FT-IR spectra were acquired in situ from normal and tension wood fibers. Light-optical micrographs showed almost complete removal of the gelatinous (G) layer in tension wood. No structural and spectral changes were observed in the lignified cell walls. The accessibility of cellulose within the lignified cell wall was found to be the main limiting factor, whereas the depletion of the enzyme due to lignin adsorption could be ruled out. The fast, selective hydrolysis of the crystalline cellulose in the G-layer, even at room temperature, might be explained by the gel-like structure and the highly porous surface. Young plantation grown hardwood trees with a high proportion of G-fibers thus represent an interesting resource for bioconversion to fermentable sugars in the process to bioethanol.

  18. Application of FT-IR spectroscopy to assess physiological stress in rugby players during fatigue test

    Directory of Open Access Journals (Sweden)

    Paulo Cesar Caetano Júnior

    Full Text Available AbstractIntroduction: The diagnosis based on salivary biomarkers provides information about the physiological condition. However, the clinical trials used to analyze these biomarkers are relatively expensive and laborious. Thus, the purpose of this study was to identify the physiological stress in players using Fourier transform infrared spectroscopy (FT-IR. Methods Thirteen male rugby players were submitted to the treadmill fatigue test and saliva collections were performed before and immediately after test. The FT-IR spectra of saliva samples were analyzed by the second derivative and cluster analysis. Results From the results of cluster analysis were possible to discriminate the spectra of saliva before and after physical effort using the spectral region between 1490 to 1420 cm–1. Only the saliva spectra from two players were not discriminated in pre-exercise group and post-exercise group, which are in agreement with lowest value of heart rates. Conclusion The second derivative showed differences between the average spectra of saliva samples collected pre and post-test, which explain the spectra discrimination by the cluster analysis using a specific infrared region for the identification of physiological stress.

  19. Raman microspectrometry, FT-IR and inclusion characteristics of gem garnets from Tanzania and Madagascar

    Institute of Scientific and Technical Information of China (English)

    Sang-kon Kim; Maeng-eon Park; Seung-gyun Baek; Kyu-youl Sung; Sun-ok Kim; Hee-yul Park

    2004-01-01

    Chemical composition, Raman microspectrometry, and Fourier transform infrared (FT-IR) and SEM-CL (Cathodluminescence) analyses are carried out for Tanzania and Madagascar garnets for locality identification. Inclusion study was sustained after electron probe microanalysis (EPMA). Needle-like illmenites, apatites and zircons were the most common solid inclusions in Tanzania garnets. Madagascar garnets revealed rutile needles and apatites were also observed, but differences in size, shape and distribution patterns were noticed compared to Tanzania garnets. Tanzania garnets exhibited all types of observable fluid inclusions such as "fingerprint" pattern, called Type Ⅰ-A, liquid-only (L) single phase fluid inclusion, called Type Ⅰ-B and Type Ⅱ-A (L + S), Type Ⅱ-B (L + V) and Type Ⅲ-A (L + Sylvite +S), Type Ⅲ-B (L+S+V), while no more than two phase fluid inclusions found in both Madagascar and Korea garnets even if all examined garnets from three localities retained "fingerprint" features, so called, partially healed fractures, in common. Chemical composition, Raman microspectrometry and Fourier transform infrared (FT-IR) analysis taken turned out to be useful methods for the purpose of this study. Using consequences of SEM-CL and inclusion study, accordingly,the locality identification of gem-quality garnets is capable of being available in further application for other kinds of gemstones.

  20. FT-IR spectroscopy combined with DFT calculation to explore solvent effects of vinyl acetate.

    Science.gov (United States)

    Chen, Yi; Zhang, Hui; Liu, Qing

    2014-05-21

    The infrared vibration frequencies of vinyl acetate (VAc) in 18 different solvents were theoretically computed at Density Function Theory (DFT) B3LYP/6-311G(*) level based on Polarizable Continuum Model (PCM) and experimentally recorded by FT-IR spectroscopy. The solvent-induced long-range bulk electrostatic solvation free energies of VAc (ΔGelec) were calculated by the SMD model. The C=O stretching vibration frequencies of VAc were utilized as a measure of the chemical reactivities of the CC group in VAc. The calculated and experimental C=O stretching vibration frequencies of VAc (νcal(C=O) and νexp(C=O)) were correlated with empirical solvent parameters including the KBM equation, the Swain equation and the linear solvation energy relationships (LSER). Through ab initio calculation, assignments of the two C=O absorption bands of VAc in alcohol solvents were achieved. The PCM, SMD and ab initio calculation offered supporting evidence to explain the FT-IR experimental observations from differing aspects.

  1. FT-IR and XRD analysis of coal from Makum coalfield of Assam

    Energy Technology Data Exchange (ETDEWEB)

    Saikia, B.K.; Boruah, R.K.; Gogoi, P.K. [Tezpur University, Tezpur (India). Dept. of Chemical Science

    2007-12-15

    High sulphur coal sample from Ledo colliery of Makum coalfield, Assam, India was studied using FT-IR and XRD methods. FT-IR study shows the presence of aliphatic -CH, -CH{sub 2} and -CH{sub 3} groups, aliphatic C-O-C stretching associated with -OH and -NH stretching vibrations and HCC rocking (single and condensed rings). XRD pattern of the coal shows that it is amorphous in nature. Function of Radial Distribution Analysis (FRDA) indicates that coal is lignite in type and there is no evidence of graphite-like structure. The first maximum in the G(r) plot of FRDA at r = 0.14 nm relates to the aliphatic C-C bond (Type C-CH = CH-C), the second maximum at r = 0.25 nm relates to the distance between carbon atoms of aliphatic chains that are located across one carbon atom. The curve intensity profiles obtained from FRDA show quite regular molecular packets for this coal. The coal was found to be lignite in nature.

  2. XRD and FT-IR investigations of sub-bituminous Assam coals

    Energy Technology Data Exchange (ETDEWEB)

    Saikia, B.K.; Boruah, R.K.; Gogoi, P.K. [Tezpur University, Tezpur (India). Dept. of Chemical Science

    2007-08-15

    Two coal samples collected from Makum coal field, Assam, India were studied by XRD and FT-IR techniques. The X-ray diffractogram shows the existence of some crystalline carbons in Assam coals as proven by the appearance of peaks. The radial distribution functional (RDF) method was applied for the determination of structural aspects of the coals. The study indicates that the coals are lignite in type and there is no evidence of graphite-like structures. The maximum in the Gr) plots of function of radial distribution of atoms (FRDA) relates to different distances between carbon atoms of aliphatic chains. The first significant maximum relates to the C-C bond (type C-CH=CH-C), the second maximum relates to the distance between carbon atoms of aliphatic chains that are located across one carbon atom. The curve intensity profiles obtained from FRDA show quite regular molecular packets for this coal. The coals were found to be lignite in nature. FT-IR study shows the presence of aliphatic carbon, C=O and C-O stretching associated with -OH and -NH stretching vibrations. Kaolinite and quartz were also found to be major minerals in Assam coals by FTIR spectroscopy. The difference in intensities of carbonyl groups of the coal samples is likely to relate with the rank.

  3. Investigation of 9-(2-hydroxy-4,4-dimethyl-6-oxocyclohex-1-en-1-yl)-3,3-dimethyl-2,3,4,9-tetrahydro-1H-xanthen-1-one: Crystal structure, AIM and NBO analysis

    Science.gov (United States)

    Udayakumar, Mani; Jagatheeswaran, Kothandapani; Ganesan, Subramaniapillai Selva; Venkataramanan, Natarajan S.; Madan Kumar, Shankar; Byrappa, Kullaiah; Thamotharan, Subbiah

    2017-04-01

    Single crystal X-ray analysis reveals that the 9-(2-hydroxy-4,4-dimethyl-6-oxocyclohex-1-en-1-yl)-3,3-dimethyl-2,3,4,9-tetrahydro-1H-xanthen-1-one, crystallizes in the centrosymmetric space group P21/c. In the crystal, molecules form as a dimer through a keto-enol type hydrogen-bonding pattern along with intermolecular Csbnd H⋯O interactions. The crystal structure of the title compound is further stabilized by intermolecular H⋯H interactions. Various intermolecular interactions present in the crystal structure are quantified by Hirshfeld surface analysis, PIXEL energy, NBO, AIM and DFT calculations. The energetics of the title compound is also compared with that of the two closely related analogs. Further, the vibrational modes of the interacting groups are characterized using both the experimental and simulated FT-IR and FT-Raman spectra. The experimental and calculated UV-visible spectra are compared and agree well. The time-dependent DFT spectra suggest that the ligand-to-ligand charge transfer within the molecule is responsible for the intense absorbance.

  4. Recognition of FT-IR Data Cuscutae Semen, Japanese Dodder, and Sinapis Semen Using Discrete Wavelet Transformation and RBF Networks

    Directory of Open Access Journals (Sweden)

    Tao Hu

    2013-01-01

    Full Text Available Horizontal attenuation total reflection Fourier transformation infrared spectroscopy (HATR-FT-IR studies on cuscutae semen and its confusable varieties Japanese dodder and sinapis semen combined with discrete wavelet transformation (DWT and radial basis function (RBF neural networks have been conducted in order to classify them. DWT is used to decompose the FT-IRs of cuscutae semen, Japanese dodder, and sinapis semen. Two main scales are selected as the feature extracting space in the DWT domain. According to the distribution of cuscutae semen, Japanese dodder, and sinapis semen’s FT-IRs, three feature regions are determined at detail 3, and two feature regions are determined at detail 4 by selecting two scales in the DWT domain. Thus five feature parameters form the feature vector. The feature vector is input to the RBF neural networks to train so as to accurately classify the cuscutae semen, Japanese dodder, and sinapis semen. 120 sets of FT-IR data are used to train and test the proposed method, where 60 sets of data are used to train samples, and another 60 sets of FT-IR data are used to test samples. Experimental results show that the accurate recognition rate of cuscutae semen, Japanese dodder, and sinapis semen is average of 100.00%, 98.33%, and 100.00%, respectively, following the proposed method.

  5. Discrimination of Corsican honey by FT-Raman spectroscopy and chemometrics

    Directory of Open Access Journals (Sweden)

    Fernández Pierna, JA.

    2011-01-01

    Full Text Available Honey is a complex and challenging product to analyze due mainly to its composition consisting on various botanical sources. The discrimination of the origin of honey is of prime importance in order to reinforce the consumer trust in this typical food product. But this is not an easy task as usually no single chemical or physical parameter is sufficient. The aim of our paper is to investigate whether FT-Raman spectroscopy as spectroscopic fingerprint technique combined with some chemometric tools can be used as a rapid and reliable method for the discrimination of honey according to their source. In addition to that, different chemometric models are constructed in order to discriminate between Corsican honeys and honey coming from other regions in France, Italy, Austria, Germany and Ireland based on their FT-Raman spectra. These regions show a large variation in their plants. The developed models include the use of exploratory techniques as the Fisher criterion for wavenumber selection and supervised methods as Partial Least Squares-Discriminant Analysis (PLS-DA or Support Vector Machines (SVM. All these models showed a correct classification ratio between 85% and 90% of average showing that Raman spectroscopy combined to chemometric treatments is a promising way for rapid and non-expensive discrimination of honey according to their origin.

  6. Human and Bovine Dentin Composition and Its Hybridization Mechanism Assessed by FT-Raman Spectroscopy

    Directory of Open Access Journals (Sweden)

    L. E. S. Soares

    2013-01-01

    Full Text Available FT-Raman spectroscopy was used to study the human and bovine dentin and their interactions with adhesive systems. Ten human (H molars and ten bovine (B teeth were prepared exposing the dentin and then each specimen was divided into two parts. The resulted forty dentin segments were treated either with the total-etch one bottle adhesive (Prime & Bond 2.1, PB or with the single-step self-etching adhesive (Xeno III, X and divided into four groups: HPB (control, HX, BPB, and BX. Each group was analyzed by FT-Raman spectroscopy before and after the adhesive treatment. Six regions of the Raman spectrum were analyzed and the integrated areas of organic and inorganic peaks were calculated. Bovine untreated specimens showed higher peak area of PO4 3−ν2  content than in human specimens. Human untreated specimens had higher peak areas of PO4 3−ν4 and CO3 2−ν1  contents than in bovine specimens. The peak areas of amide III, CH2, and amide I contents were higher in human than in bovine specimens (before treatments. Treated dentin showed no significant statistical differences between the adhesives for both inorganic and organic contents considering the same substrate. However, the differences found between human and bovine specimens after adhesives application show a reduced accuracy of these substrates as a substitute to the human specimens.

  7. Identification and classification of textile fibres using ATR-FT-IR spectroscopy with chemometric methods.

    Science.gov (United States)

    Peets, Pilleriin; Leito, Ivo; Pelt, Jaan; Vahur, Signe

    2017-02-15

    The possibility of classification of single- and two-component textile materials using ATR-FT-IR spectra and chemometric methods, principal component analysis (PCA) and discriminant analysis, was assessed. Altogether 89 textile samples belonging to 26 different types (11 one- and 15 two-component textiles) were investigated. It was found that PCA classification using only two or three principal components (PCs) enables identifying different one- and two-component textiles, although with two important limitations: it was not always possible to distinguish between the cellulose-based fibres (cotton, linen and in some cases viscose) and it was only partly possible to distinguish between silk and wool. The statistical discriminant analysis can use as many PCs as there are sample classes and due to that can discriminate between single-component fibres, including viscose from linen and cotton as well as silk from wool. Besides that, in both of these cases, involving optical microscopy as an additional technique enabled unequivocal identification of the fibres. The possibilities of semi-quantitative analysis of mixed fibres (cotton-polyester, wool-polyester and wool-polyamide) with PCA were investigated and it was found that approximate quantitative composition is obtainable if for the mixed fibre sample a number of spectra are averaged in order to minimize the effect of structural inhomogeneity. For approximate content determination 25 spectra of selected two-component samples were registered for calibration and the averaged spectrum for each sample was computed. Due to the structural inhomogeneity of mixed textiles, obtaining accurate quantitative composition from real samples is not possible with ATR-FT-IR. The main problems with ATR-FT-IR-PCA classification are (1) difficulties in getting high quality spectra from some textiles (e.g. polyacrylic), (2) inhomogeneity of the textile fibres in the case of two-component fibres and (3) intrinsic similarity between the

  8. Identification and classification of textile fibres using ATR-FT-IR spectroscopy with chemometric methods

    Science.gov (United States)

    Peets, Pilleriin; Leito, Ivo; Pelt, Jaan; Vahur, Signe

    2017-02-01

    The possibility of classification of single- and two-component textile materials using ATR-FT-IR spectra and chemometric methods, principal component analysis (PCA) and discriminant analysis, was assessed. Altogether 89 textile samples belonging to 26 different types (11 one- and 15 two-component textiles) were investigated. It was found that PCA classification using only two or three principal components (PCs) enables identifying different one- and two-component textiles, although with two important limitations: it was not always possible to distinguish between the cellulose-based fibres (cotton, linen and in some cases viscose) and it was only partly possible to distinguish between silk and wool. The statistical discriminant analysis can use as many PCs as there are sample classes and due to that can discriminate between single-component fibres, including viscose from linen and cotton as well as silk from wool. Besides that, in both of these cases, involving optical microscopy as an additional technique enabled unequivocal identification of the fibres. The possibilities of semi-quantitative analysis of mixed fibres (cotton-polyester, wool-polyester and wool-polyamide) with PCA were investigated and it was found that approximate quantitative composition is obtainable if for the mixed fibre sample a number of spectra are averaged in order to minimize the effect of structural inhomogeneity. For approximate content determination 25 spectra of selected two-component samples were registered for calibration and the averaged spectrum for each sample was computed. Due to the structural inhomogeneity of mixed textiles, obtaining accurate quantitative composition from real samples is not possible with ATR-FT-IR. The main problems with ATR-FT-IR-PCA classification are (1) difficulties in getting high quality spectra from some textiles (e.g. polyacrylic), (2) inhomogeneity of the textile fibres in the case of two-component fibres and (3) intrinsic similarity between the

  9. Micro-Attenuated Total Reflection Fourier Transform Infrared (Micro ATR FT-IR) Spectroscopic Imaging with Variable Angles of Incidence.

    Science.gov (United States)

    Wrobel, Tomasz P; Vichi, Alessandra; Baranska, Malgorzata; Kazarian, Sergei G

    2015-10-01

    The control of the angle of incidence in attenuated total reflection (ATR) Fourier transform infrared (FT-IR) spectroscopy allows for the probing of the sample at different depths of penetration of the evanescent wave. This approach has been recently coupled with macro-imaging capability using a diamond ATR accessory. In this paper, the design of optical apertures for the micro-germanium (Ge) ATR objective is presented for an FT-IR spectroscopic imaging microscope, allowing measurements with different angles of incidence. This approach provides the possibility of three-dimensional (3D) profiling in micro-ATR FT-IR imaging mode. The proof of principle results for measurements of polymer laminate samples at different angles of incidence confirm that controlling the depth of penetration is possible using a Ge ATR objective with added apertures.

  10. FT-IR spectroscopy and DFT calculation study on the solvent effects of benzaldehyde in organic solvents.

    Science.gov (United States)

    Li, Yi; Zhang, Hui; Liu, Qing

    2012-02-01

    FT-IR spectra of benzaldehyde in 11 different organic solvents were recorded and analyzed. The density functional theory (DFT) B3LYP/6-31G* method was chosen to calculate the infrared spectrum of benzaldehyde in gaseous state. The electrostatic effects of different solvents in benzaldehyde solutions were calculated using DFT with the self-consistent isodensity polarizable continuum model (SCI-PCM). Two remarkable carbonyl (C=O) peaks of benzaldehyde were observed by FT-IR in alcohol solvents, which were caused by different hydrogen bond species and explained by ab initio calculation. The results showed that the combination of SCI-PCM model and ab initio calculation could give excellent agreements with FT-IR spectra of title compound in solutions.

  11. Crystallization and micro FT-IR spectroscopy investigation of cytochrome bc1 complex

    Institute of Scientific and Technical Information of China (English)

    岳文海; 何季平; 谢荣; 徐建兴; 朱克莉; 翁诗甫

    1996-01-01

    A simple method to obtain large red crystals of cytochrome bc1 complex from beef heart mitochondria has been developed. These crystals are very stable. Their shapes are retained for a long time in tip-sealed Pasteur pipets placed in a refrigerator. The structure of crystalline cytochrome bc1 complex by micro FT-IR spectroscopy has been investigated. Based on the IR spectra of cytochrome c, the empirical assignments of the major infrared frequencies of cytochrome bc1 complex are given. Infrared frequencies and relative intensities of variable orientation and section of crystal are significantly different. These imply that infrared spectral characterization of the membrane protein crystallization is associated with the variable symmetries and orientations of the structure. Experimental results show that phospholipid exists in the crystal of cytochrome bc1 complex. The membrane protein is probably spanned on the mitochondrial membrane and buried in phospholipid bilayer in an asymmetric manner.

  12. [FT-IR spectroscopic analysis in monitoring of hydroxyl stretching vibrations in plant hydrogels].

    Science.gov (United States)

    Pielesz, Anna; Biniaś, Dorota; Wieczorek, Joanna

    2011-01-01

    In recent years, some bioactive hydrogels isolated from natural sources have attracted much attention in the field of biochemistry and pharmacology. This article attempts to review the current structural and conformational characterization of some importantly bioactive hydrogels isolated from following plant: Symphytum officinale, Thymus pulegioides, Trigonella foenum-graecum L., Tussilago farfara L., Hyssopus officinalis, Althaea officinalis L., Equisetum arvense L. Linum usitatissimum L. and Fucus vesiculosus L. Hydrogels are cross-linked three-dimensional polysaccharide macromolecular networks that contain a large fraction of water within their structure. FT-IR spectroscopic analysis showed a strong band at 3500-3100 cm(-1) attributed to hydroxyl (the intermolecular and the intramolecular hydrogen bonds) stretching vibrations changes.

  13. Molecular structure and spectral (FT-IR, Raman) investigations of 3-aminocoumarin

    Science.gov (United States)

    Dereli, Ömer

    2016-05-01

    The molecular structure of 3-Aminocoumarin was determined by conformational analysis. Conformational space was scanned by conformer distribution option of Spartan 08 program package using Merck Molecular Force Field (MMFF) method. Then obtained conformers were optimized by B3LYP/6-311++ G( d, p) and B3LYP/6-311 G( d, p) levels of Density Functional Theory. As a result of these calculations, only one conformer was determined. Vibrational frequencies of this conformer were calculated by Gaussian 03 program package using the same levels of geometry optimizations. The FT-IR and Raman spectra of 3-Aminocoumarin were recorded and compared with the calculated values. Consequently, a good agreement between experimental and the calculated values were founded. Molecular electrostatic potentials (MEPs), HOMO-LUMO energies, thermodynamic properties and Mulliken atomic charges were also covered in this study.

  14. Adsorption and interaction of 5-fluorouracil with montmorillonite and saponite by FT-IR spectroscopy

    Science.gov (United States)

    Akalin, Elif; Akyuz, Sevim; Akyuz, Tanil

    2007-05-01

    Adsorption of 5-fluorouracil (5-FU) on montmorillonite and saponite has been investigated using FT-IR spectrometry. The intercalation of 5-FU within montmorillonite or saponite has been shown by X-ray diffraction to increase the interlayer spacing. In order to investigate interaction of 5-FU with clays, the harmonic and anharmonic vibrational wavenumbers of free 5-FU and 5-FU interacting with Al(OH) 3 have been calculated at the DFT/B3LYP level with 6-31++G(d,p) basis set by using Gaussian 03 program set. The solution effect on 5-FU was also calculated by using polarizable continuum model (PCM). Experimental and calculated results indicated that 5-FU interacted with clays by direct or indirect coordination (through water molecules) to the Lewis acidic centers.

  15. Measurement of single moving particle temperatures with an FT-IR spectrometer

    DEFF Research Database (Denmark)

    Clausen, Sønnik; Sørensen, L.H.

    1996-01-01

    A conventional scanning FT-IR spectrometer is used to measure the blackbody radiation through a rapidly moving pinhole in an experiment simulating a dying hot particle. The effects and errors from source movements are analyzed and verified through experiments. The importance of the scanning...... velocity, phase-correction method, and temperature variations during scanning is investigated. It is shown that a calibration of the system at one temperature is sufficient for accurate spectral radiance and temperature measurements throughout a broad temperature range. The temperature errors are reduced...... by a factor of 2-10 compared with results from a typical two-color pyrometer. A novel method is presented for measuring emission spectra from single moving particles passing the field of view of the spectrometer in a random manner....

  16. FT-IR microscopical analysis with synchrotron radiation: The microscope optics and system performance

    Energy Technology Data Exchange (ETDEWEB)

    Reffner, J.A.; Martoglio, P.A. [Spectra-Tech, Inc., Shelton, CT (United States); Williams, G.P. [Brookhaven National Lab., Upton, NY (United States)

    1995-01-01

    When a Fourier transform infrared (FT-IR) microspectrometer was first interfaced with the National Synchrotron Light Source (NSLS) in September 1993, there was an instant realization that the performance at the diffraction limit had increased 40-100 times. The synchrotron source transformed the IR microspectrometer into a true IR microprobe, providing high-quality IR spectra for probe diameters at the diffraction limit. The combination of IR microspectroscopy and synchrotron radiation provides a powerful new tool for molecular spectroscopy. The ability to perform IR microspectroscopy with synchrotron radiation is still under development at Brookhaven National Laboratory, but several initial studies have been completed that demonstrate the broad-ranging applications of this technology and its potential for materials characterization.

  17. Multivariate chemometric approach to thermal solid-state FT-IR monitoring of pharmaceutical drug compound.

    Science.gov (United States)

    Tan, Wei Jian; Widjaja, Effendi

    2008-08-01

    The study of thermal-related solid-state reaction monitored by spectroscopic method needs the use of advanced multivariate chemometric approach. It is because visual inspection of spectral data on particular functional groups or spectral bands is difficult to reveal the complete physical and chemical information. The spectral contributions from various species involved in the solid-state changes are generally highly overlapping and the spectral differences between reactant and product are usually quite minute. In this article, we demonstrate the use of multivariate chemometric approach to resolve the in situ thermal-dependent Fourier-transform infrared (FT-IR) mixture spectra of lisinopril dihydrate when it was heated from 24 to 170 degrees C. The collected FT-IR mixture spectra were first subjected to singular value decomposition (SVD) to obtain the right singular vectors. The right singular vectors were rotated into a set of pure component spectral estimates based on entropy minimization and spectral dissimilarity objective functions. The resulting pure component spectral estimates were then further refined using alternating least squares (ALS). In current study, four pure component spectra, that is, lisinopril dihydrate, monohydrate, anhydrate, and diketopiperazine (DKP) were all resolved and the relative thermal-dependent contributions of each component were also obtained. These relative contributions revealed the critical temperature for each transformation and degradation. This novel approach provides better interpretation of the pathway of dehydration and intramolecular cyclization of lisinopril dihydrate in the solid state. In addition, it can be used to complement the information obtained from differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA).

  18. Analysis of quartz by FT-IR in air samples of construction dust.

    Science.gov (United States)

    Virji, M Abbas; Bello, Dhimiter; Woskie, Susan R; Liu, X Michael; Kalil, Andrew J

    2002-03-01

    The construction industry is reported to have some of the highest exposures to silica-containing dust. With the designation of crystalline silica as a group I human carcinogen by the International Agency for Research on Cancer (IARC), there exists a need for an analytical method to accurately quantify low levels of quartz. A method is described that uses FT-IR for quartz analysis of personal air samples collected from heavy and highway construction sites using 4-stage personal impactors. Sample filters were ashed and 13-mm or 5-mm pellets were prepared. Absorbance spectra were collected using FT-IR at resolution of 1 cm(-1) and 64 scans per spectrum. Two spectra were collected per sample using the appropriate background spectrum subtraction. Spectral manipulations such as Fourier self-deconvolution and derivatizations were performed to improve quantification. Peak height for quartz was measured at 798 cm(-1) for quantitative analysis. The estimated limit of detection for the 5-mm pellets was 1.3 microg. Recoveries of Min-U-Sil 5 spikes showed an average of > or = 94 percent for the two pellet types. The coefficient of variation of the 5-mm pellet was 9 percent at 6 microg quartz load, and 7 percent at 62 microg load. Interferences from clay, amorphous silica, concrete, calcite, and kaolinite were investigated, these being the more likely sources of interferences in construction environment. Spikes of mixtures of amorphous silica or kaolinite with Min-U-Sil 5 showed both contaminants introduced, on average, a positive error of clay or concrete with Min-U-Sil 5 showed overall average recovery of 100 percent and 90 percent, respectively, after accounting for the presence of quartz in clay and concrete. This method can quantify low levels of quartz with reasonable accuracy in the face of common contaminants found in the construction industry.

  19. Characterization of Paracoccidioides brasiliensis by FT-IR spectroscopy and nanotechnology.

    Science.gov (United States)

    Ferreira, Isabelle; Ferreira-Strixino, Juliana; Castilho, Maiara L; Campos, Claudia B L; Tellez, Claudio; Raniero, Leandro

    2016-01-01

    Paracoccidioides brasiliensis, the etiological agent of paracoccidioidomycosis, is a dimorphic fungus existing as mycelia in the environment (or at 25°C in vitro) and as yeast cells in the human host (or at 37°C in vitro). Because mycological examination of lesions in patients frequently is unable to show the presence of the fungus and serological tests can misdiagnose the disease with other mycosis, the development of new approach's for molecular identification of P. brasiliensis spurges is needed. This study describes the use of a gold nanoprobe of a known gene sequence of P. brasiliensis as a molecular tool to identify P. brasiliensis by regular polymerase chain reaction (PCR) associated with a colorimetric methods. This approach is suitable for testing in remote areas because it does not require any further step than gene amplification, being safer and cheaper than electrophoresis methods. The proposed test showed a color change of the PCR reaction mixture from red to blue in negative samples, whereas the solution remains red in positive samples. We also performed a Fourier Transform Infrared (FT-IR) Spectroscopy analysis to characterize and compare the chemical composition between yeast and mycelia forms, which revealed biochemical differences between these two forms. The analysis of the spectra showed that differences were distributed in chemical bonds of proteins, lipids and carbohydrates. The most prominent difference between both forms was vibration modes related to 1,3-β-glucan usually found in mycelia and 1,3-α-glucan found in yeasts and also chitin forms. In this work, we introduce FT-IR as a new method suitable to reveal overall differences that biochemically distinguish each form of P. brasiliensis that could be additionally used to discriminate biochemical differences among a single form under distinct environmental conditions.

  20. Characterization of supersaturated lidocaine/polyacrylate pressure sensitive adhesive systems: thermal analysis and FT-IR.

    Science.gov (United States)

    Cui, Yong; Frank, Sylvan G

    2006-03-01

    Supersaturated and crystallized lidocaine (LC)/pressure sensitive adhesive (PSA) systems have been studied by differential scanning calorimetry (DSC) and FT-IR with the objective of characterizing the thermodynamic states and compatibility of the two-component systems. Analysis of the phase behavior of LC/DT2287 systems indicates that LC and DT2287 are thermodynamically miscible within the composition range containing less than approximately 20% w/w LC, beyond which LC may crystallize from the blends forming a separated crystalline phase. The composition dependence of the glass transition temperature (T(g)) was used to characterize the physical and thermodynamic states of the supersaturated systems. The Fox, Gordon-Taylor, Kwei, Kovacs, and Brekner, Schneider and Cantow (BSC) equations were employed to conduct the analysis. It was found that the PSA in the supersaturated LC/PSA systems underwent significant entropic relaxation upon mixing. LC in the miscible systems is absorbed into and swells the polymer network of the PSA, thereby exhibiting reduced molecular mobility, while the PSA attains significant molecular conformation relaxation and entropy increase. It was also found that LC molecules extensively participate in molecular relaxation of the PSA throughout the composition range studied. The molecular mobility of LC is inhibited as the volume fraction of DT2287 increases, suggesting that the PSA molecular network reduces the molecular mobility of LC by closely involving LC molecules in its relaxation, and thereby may enhancing the physical stability of the systems. No strong intermolecular interactions between the two components were found based upon the results of T(g)-composition analysis, and was confirmed by FT-IR studies. This indicates that the analysis based on the BSC equation provides more precise characterization of polymer systems than the T(g) -composition analysis based on other equations cited. Copyright 2006 Wiley-Liss, Inc. and the American

  1. Effect of Water on HEMA Conversion by FT-IR Spectroscopy

    Directory of Open Access Journals (Sweden)

    TS. Jafarzadeh Kashi

    2007-09-01

    Full Text Available Objective: The use of HEMA as a biocompatible material in dentin bonding systems and its potential for clinical applications has been well established. Excess water can affect conversion of bonding resins. The aim of this study was to survey the effect of water on the degree of conversion of HEMA by Fourier Transform Infra-red Spectroscopy (FT-IR.Materials and Methods: In this experimental study, distilled water was added in amounts of 0, 0.05, 0.1, 0.2, and 0.4 ml to 1 ml of curable HEMA solution. Six repetitions per wa-ter ratio were made and investigated. Each sample was polymerized for 60 seconds. De-gree of conversion was obtained from the absorbance IR-Spectrum of the materials before and after polymerization by FT-IR spectroscopy. One way ANOVA and Tukey-HSD were carried out to compare and detect any differences among groups.Results: Statistical analysis indicates highly significant difference between pairs of groups at level (P<0.001. The results showed a trend of decreasing in HEMA conversion with increasing water. Degree of conversion changes significantly within the 0.05 ml to 0.2 ml water range. However, degree of conversion did not change after reaching 0.02 ml and before 0.05.Conclusion: Degree of conversion of HEMA decreased by increasing water. The most dramatic effect of water on the polymerization process occurs within a range which exists under clinical conditions. The reason that the degree of conversion did not show signifi-cant result before 0.05 ml may be related to the hydrophilic nature of HEMA.

  2. Application of Fourier-transform infrared (FT-ir) spectroscopy to in-situ studies of coal combustion

    Energy Technology Data Exchange (ETDEWEB)

    Ottesen, D K; Thorne, L R

    1982-04-01

    The feasibility of using Fourier-transform infrared (FT-ir) spectroscopy for in situ measurement of gas phase species concentrations and temperature during coal combustion is examined. This technique is evaluated in terms of its potential ability to monitor several important chemical and physical processes which occur in pulverized coal combustion. FT-ir absorption measurements of highly sooting, gaseous hydrocarbon/air flames are presented to demonstrate the fundamental usefulness of the technique for in situ detection of gas phase temperatures and species concentrations in high temperature combustion environments containing coal, char, mineral matter and soot particles. Preliminary results for coal/gaseous fuel/air flames are given.

  3. NMR, FT-IR, Raman and UV-Vis spectroscopic investigation and DFT study of 6-Bromo-3-Pyridinyl Boronic Acid

    Science.gov (United States)

    Dikmen, Gökhan; Alver, Özgür

    2015-11-01

    Possible stable conformers and geometrical molecular structures of 6-Bromo-3-Pyridinyl Boronic acid (6B3PBA; C5H5BBrNO2) were studied experimentally and theoretically using FT-IR and Raman spectroscopic methods. FT-IR and Raman spectra were recorded in the region of 4000-400 cm-1 and 3700-400 cm-1, respectively. The structural properties were investigated further, using 1H, 13C, 1H coupled 13C, HETCOR, COSY and APT NMR techniques. The optimized geometric structures were searched by Becke-3-Lee-Yang-Parr (B3LYP) hybrid density functional theory method with 6-311++G(d, p) basis set. Vibrational wavenumbers of 6B3PBA were calculated whereby B3LYP density functional methods including 6-311++G(d, p), 6-311G(d, p), 6-311G(d), 6-31G(d, p) and 6-31G(d) basis sets. The comparison of the experimentally and theoretically obtained results using mean absolute error and experimental versus calculated correlation coefficients for the vibrational wavenumbers indicates that B3LYP method with 6-311++G(d, p) gives more satisfactory results for predicting vibrational wavenumbers when compared to the 6-311G(d, p), 6-311G(d), 6-31G(d, p) and 6-31G(d) basis sets. However, this method and none of the mentioned methods here seem suitable for the calculations of OH stretching modes, most likely because increasing unharmonicity in the high wave number region and possible intra and inter molecular interactions at OH edges lead some deviations between experimental and theoretical results. Moreover, reliable vibrational assignments were made on the basis of total energy distribution (TED) calculated using scaled quantum mechanical (SQM) method.

  4. CHARACTERIZATION OF REFINED HEMP FIBERS USING NIR FT RAMAN MICRO SPECTROSCOPY AND ENVIRONMENTAL SCANNING ELECTRON MICROSCOPY

    Directory of Open Access Journals (Sweden)

    Siva Kumar Kovur

    2008-11-01

    Full Text Available The research was focused on the separation of single hemp (Cannabis sativa L. fibre cells with low fineness from mechanically extracted fibre bundles of high fineness. The fiber bundles were treated with enzymes, namely panzym, pectinase, hemicellulase, and cellulase, along with a combination of panzym and ultrasonic treatments. Changes in the fiber structure were followed at molecular and microscopic levels by means of NIR FT Raman spectroscopy and Environmental Scanning Electron Microscopy (ESEM. Buffer-panzym treatments of hemp fibers had a prominent effect in loosening of the fiber cells. The best of refining was achieved when the fiber bundles were treated with buffer-panzym solution in combination with ultrasonic treatment.

  5. FT-Raman spectroscopy of the Candelaria and Pyxine lichen species: A new molecular structural study

    Science.gov (United States)

    Fernandes, Rafaella F.; Ferreira, Gilson R.; Spielmann, Adriano A.; Edwards, Howell G. M.; de Oliveira, Luiz Fernando C.

    2015-12-01

    In this work the chemistry of the lichens Candelaria fibrosa and Pyxine coccifera have been investigated for the first time using FT-Raman spectroscopy with the help of quantum mechanical DFT calculations to support spectral band assignments. The non-destructive spectral vibrational analysis provided evidence for the presence of pulvinic acid derivatives and conjugated polyenes, which probably belong to a carotenoid with characteristic signatures at ca. 1003, 1158 and 1525 cm-1 assigned respectively to δ(C-CH3), ν(C-C) and ν(Cdbnd C) modes. The identification of features arising from chiodectonic acid in the Pyxine species and calycin and pulvinic dilactone pigments in C. fibrosa were assisted by the quantum mechanical DFT calculations. Raman spectroscopy can provide important spectroscopic data for the identification of the biomarker spectral signatures nondestructively for these lichen pigments without the need for chemical extraction processes.

  6. FT-Raman and FTIR spectra of photoactive aminobenzazole derivatives in the solid state: A combined experimental and theoretical study

    Energy Technology Data Exchange (ETDEWEB)

    Alves, Rodrigo Martins [Universidade Federal do Pampa, Campus Bagé, Grupo de Pesquisa em Espectroscopia de Materiais Fotônicos, 96400-970 Bagé, RS (Brazil); Rodembusch, Fabiano Severo [Universidade Federal do Rio Grande do Sul, Grupo de Pesquisa em Fotoquímica Orgânica Aplicada, Av. Bento Gonçalves 9500, CEP 91501-970 Porto Alegre, RS (Brazil); Habis, Charles [Northern Virginia Community College, Manassas, VA (United States); Moreira, Eduardo Ceretta, E-mail: eduardomoreira@unipampa.edu.br [Universidade Federal do Pampa, Campus Bagé, Grupo de Pesquisa em Espectroscopia de Materiais Fotônicos, 96400-970 Bagé, RS (Brazil)

    2014-12-15

    This study reports the experimental investigation of two photoactive aminobenzazole derivatives in the solid state by FT-Raman and Infrared Spectroscopies (FTIR) and its comparison with theoretical models. The optimized molecular structure, vibrational frequencies, and corresponding vibrational assignments of these compounds have been investigated experimentally and theoretically using Spanish Initiative for Electronic Simulations with Thousands of Atoms (SIESTA) and Gaussian03 Software Package. The FT-Raman and FTIR spectra were acquired with high resolution and emission frequencies identified by simulating the vibrational modes. The most intense peak observed in the FT-Raman spectra is the in-plane deformation vibrational of O–H bond that could be related to the vibrational region responsible for the stabilization of the enol conformer in the ground state which undergoes ESIPT to form a keto tautomer in the excited state. Additionally, the position of the amino group played an important role on the vibrational characteristics of the studied compounds. Also, the simulations proved to be a good approach in undertaking the FTIR and FT-Raman experiments. The use of graphic correlations helps us to determine the method and basis that best fit the experimental results. - Highlights: • Structural and vibrational properties of two aminobenzazoles were reported. • Comparison between experimental techniques and theoretical models. • The position of the amino group played an important role on the vibrational characteristics of the studied compounds.

  7. High-wavenumber FT-Raman spectroscopy for in vivo and ex vivo measurements of breast cancer

    DEFF Research Database (Denmark)

    Garcia-Flores, A. F.; Raniero, L.; Canevari, R. A.;

    2011-01-01

    The identification of normal and cancer breast tissue of rats was investigated using high-frequency (HF) FT-Raman spectroscopy with a near-infrared excitation source on in vivo and ex vivo measurements. Significant differences in the Raman intensities of prominent Raman bands of lipids and protei...

  8. Sugar and acid content of Citrus prediction modeling using FT-IR fingerprinting in combination with multivariate statistical analysis.

    Science.gov (United States)

    Song, Seung Yeob; Lee, Young Koung; Kim, In-Jung

    2016-01-01

    A high-throughput screening system for Citrus lines were established with higher sugar and acid contents using Fourier transform infrared (FT-IR) spectroscopy in combination with multivariate analysis. FT-IR spectra confirmed typical spectral differences between the frequency regions of 950-1100 cm(-1), 1300-1500 cm(-1), and 1500-1700 cm(-1). Principal component analysis (PCA) and subsequent partial least square-discriminant analysis (PLS-DA) were able to discriminate five Citrus lines into three separate clusters corresponding to their taxonomic relationships. The quantitative predictive modeling of sugar and acid contents from Citrus fruits was established using partial least square regression algorithms from FT-IR spectra. The regression coefficients (R(2)) between predicted values and estimated sugar and acid content values were 0.99. These results demonstrate that by using FT-IR spectra and applying quantitative prediction modeling to Citrus sugar and acid contents, excellent Citrus lines can be early detected with greater accuracy.

  9. Detection and classification of salmonella serotypes using spectral signatures collected by fourier transform infrared (FT-IR) spectroscopy

    Science.gov (United States)

    Spectral signatures of Salmonella serotypes namely Salmonella Typhimurium, Salmonella Enteritidis, Salmonella Infantis, Salmonella Heidelberg and Salmonella Kentucky were collected using Fourier transform infrared spectroscopy (FT-IR). About 5-10 µL of Salmonella suspensions with concentrations of 1...

  10. Simultaneous determination of some artificial sweeteners in ternary formulations by FT-IR and EI-MS

    Science.gov (United States)

    Tosa, Nicoleta; Moldovan, Zaharie; Bratu, Ioan

    2012-02-01

    Artificial sweeteners are widely used in food, beverage and pharmaceutical industries all over the world. In this study some non-nutritive sweeteners such as aspartame, acesulfame-K, sodium cyclamate and sodium saccharin were simultaneously determined in ternary mixtures using FT-IR and EI-MS measurements. FT-IR method is based on direct measurements of the peak height values and area centered on 1736 cm-1, 836 cm-1, 2854 cm-1 and 1050 cm-1 for aspartame, acesulfame-K, sodium cyclamate and sodium saccharin, respectively. Mass spectrometry determinations show the characteristic peaks at m/z 91 and 262 for aspartame,m/z 43 and 163 acesulfame-K,m/z 83 and 97 for sodium cyclamate andm/z 104 and 183 for sodium saccharin. The results obtained by EI-MS in different formulations are in agreement with the FT-IR ones and provide also essential data concerning the purity grade of the components. It is concluded that FT-IR and EI-MS procedures developed in this work represent a fast, sensitive and low cost alternative in the quality control of such sweeteners in different ternary formulations.

  11. Discrimination of different processed animal proteins (PAPs by FT-IR spectroscopy based on their fat characteristics

    Directory of Open Access Journals (Sweden)

    Pu, Q.

    2014-01-01

    Full Text Available This study was undertaken to explore the potential of FT-IR technique for discriminating different species of processed animal proteins (PAPs based on their fat characteristics. A total of 47 source-reliable PAPs samples containing fish meal, porcine, bovine, ovine and poultry meat and bone meal (MBM were involved in the present study. The results obtained showed that the FT-IR differentiated quite well between the fat derived from different species of PAPs, especially at the bands of 3,006 cm-1 and 722 cm-1. Results provided evidence that FT-IR differentiated the fat derived from fish meal, terrestrial non-ruminant and ruminant MBM quite well. Fish meal and ruminant MBM samples could be discriminated effectively by both the sensitivity and specificity values which were 1.00 and 1.00, respectively. For non-ruminant MBM samples, the sensitivity and specificity were 1.00 and 0.96, respectively. However, it was hard to distinguish bovine MBM from ovine ones as well as porcine MBM from poultry ones. The result makes it possible to allow FT-IR analytical methodology as a preliminary study for the exploitation of a rapid and reliable way for the identification of the animal origin of PAPs used in feeding stuffs.

  12. Crystal structure, vibrational and magnetic properties of the monohydrated cobalt (II) complex with 1-(4-Nitrophenyl)-1H-imidazolium cation, (C9H8N3O2)2CoCl4·H2O

    Science.gov (United States)

    Amamou, W.; Chniba-Boudjada, N.; Zouari, F.

    2017-01-01

    Single crystals of organic-inorganic hybrid compound Bis(1-(4-Nitrophenyl)-1H-imidazolium) tetrachlorocobaltate monohydrate, was obtained by slow evaporation of an aqueous solution at room temperature and characterized by a single-crystal X-ray diffraction, an elemental and thermal analysis, UV-Vis spectra, FT-IR and FT-Raman spectroscopies as well as magnetic measurements. The entitled compound crystallizes into triclinic system of P-1 space group. The Co(II) ion of the [CoCl4]2- anion shows a tetrahedral coordinating geometry. The atomic arrangement can be described as an alternation of organic and inorganic layers along the c-axis. The different components are connected by Nsbnd H⋯Cl, Osbnd H⋯Cl and Osbnd H⋯O hydrogen bonds. The differential scanning calorimetry (DSC) of the title compound revealed an endothermic peak at 52 °C related with a phase transformation caused by a slight deformation of the inorganic group. The room temperature IR and Raman spectra were recorded and analyzed on the basis of literary data to gain more information about the entitled compound. The magnetic susceptibility measurements in the temperature range 2-100 K shows that the complex displays a weak antiferromagnetic exchange interaction at very low temperatures.

  13. FT-IR Characterization of Pollen Biochemistry, Viability, and Germination Capacity in Saintpaulia H. Wendl. Genotypes

    Directory of Open Access Journals (Sweden)

    Erzsebet Buta

    2015-01-01

    Full Text Available FT-IR characterization of pollen biochemistry was analyzed to detect possible connection with the viability (by staining with potassium iodide, 25% and the germination capacity (on solid nutrient medium, in 15 Saintpaulia genotypes. Vibrational spectroscopy indicates that the pollen of S. ionantha genotype “Red Velvet” is rich in proteins, lipids, triglycerides, and esters and has a viability of 88.4% and a low germination capacity (27.16%. For S. ionantha “Jolly Red” and “Lucky Ladybug” genotypes, pollen showed high viability (88.81–91.49% and low germination capacity (23.02–9.17%, even though the pollen is rich in carbohydrates. S. ionantha “Aloha Orchid” genotype has the highest percentage of viability (94.32% and germination capacity (45.73% and a rich content of carbohydrates and polygalacturonic acids. In S. rupicola and S. ionantha genotypes, the rich content of polygalacturonic acids, lipids, and carbohydrates favourably influenced the germination capacity. Spectroscopic result indicates, through different absorbance band intensity, a possible link between biochemical composition, viability, and germination capacity of Saintpaulia pollen. To determine exactly the relation between biochemistry and biological processes, it is necessary to initiate quantitative researches.

  14. FT-IR spectrometry utilization for determining changes in erythrocyte susceptibility to oxidative stress

    Science.gov (United States)

    Petibois, Cyril; Deleris, Gdrard Y. R.

    2004-07-01

    We tested the hypothesis that FT-IR spectrometry was useful for determining oxidative stress damage on erythrocytes. Endurance-trained subjects performed a standardized endurance-training session at 75% of maximal oxygen consumption each week over 19 consecutive weeks. Capillary blood samples were taken before and after test-sessions and plasma and erythrocytes were separately analyzed using Fourier-transform infrared spectrometry. Exercise-induced change in plasma concentrations and erythrocyte IR absorptivities (vC-Hn of fatty acyl moieties, vC=O and δN-H of proteins, vP=O of phospholipids, vCOO- of amino-acids, and vC-O of lactate) were monitored and compared to training level. First training weeks induced normalization of plasma concentration changes during exercise (unchanged for glucose, moderately increased for lactate, high increases for triglycerides, glycerol, and fatty acids) while erythrocyte phospholipids alteration remained elevated (P < 0.05). Further, training reduced the exercise-induced erythrocyte lactate content increase (vC-O; P < 0.05) and phospholipids alteration (vC-Hn and vP=O; P < 0.05) during exercise. These changes paralleled the lowering of exercise-induced hemoconcentration (P < 0.05) and plasma lactate concentration increase during exercise (P < 0.05). These correlated changes between plasma and erythrocyte parameters suggest that hemoconcentration and lactate acidosis (plasmatic and intracellular) are important factors contributing to reduce erythrocyte susceptibility to oxidative stress during chronic endurance training.

  15. Influence of brine-hydrocarbon interactions on FT-IR microspectroscopic analyses of intracrystalline liquid inclusions

    Energy Technology Data Exchange (ETDEWEB)

    Pironon, J. (CNRS-CREGU, Vandoeuvre-les-Nancy (France)); Barres, O. (Univ. de Nancy 1, Vandoeuvre-les-Nancy (France))

    1992-01-01

    Hydrocarbon droplets surrounded by an aqueous phase and trapped in a host crystal (i.e., fluid inclusion) are windows to the migrating hydrocarbon-water emulsions in petroleum reservoirs. Using synthetic hydrocarbon inclusions, Fourier transform infrared microspectrometric analysis shows that the interactions at the two liquid (hydrocarbon-aqueous solution) phase interface can be determined on a 20 {mu}m scale. Spectral deformation, observed for the CH stretching bands, disappears when the alkali salt concentration decreases, when the organic solvent (CCl{sub 4} or C{sub 6}H{sub 6}) concentration increases, and when the {mu}FT-IR analysis point moves off the interface. This deformation is due to the cation effect on the interaction of the OH/CH dipoles. The Na{sup +}, K{sup +} cations break the water structure and induce modifications to the OH dipole at the interface, which then modifies the CH dipole moment and the CH stretching band intensity. Knowledge of the salinity of the aqueous phase is essential for complete understanding of infrared microanalysis of hydrocarbon fluid inclusions.

  16. FT-IR microscopic mappings of early mineralization in chick limb bud mesenchymal cell cultures

    Science.gov (United States)

    Boskey, A. L.; Camacho, N. P.; Mendelsohn, R.; Doty, S. B.; Binderman, I.

    1992-01-01

    Chick limb bud mesenchymal cells differentiate into chondrocytes and form a cartilaginous matrix in culture. In this study, the mineral formed in different areas within cultures supplemented with 4 mM inorganic phosphate, or 2.5, 5.0, and 10 mM beta-glycerophosphate (beta GP), was characterized by Fourier-transform infrared (FT-IR) microscopy. The relative mineral-to-matrix ratios, and distribution of crystal sizes at specific locations throughout the matrix were measured from day 14 to day 30. The only mineral phase detected was a poorly crystalline apatite. Cultures receiving 4 mM inorganic phosphate had smaller crystals which were less randomly distributed around the cartilage nodules than those in the beta GP-treated cultures. beta GP-induced mineral consisted of larger, more perfect apatite crystals. In cultures receiving 5 or 10 mM beta GP, the relative mineral-to-matrix ratios (calculated from the integrated intensities of the phosphate and amide I bands, respectively) were higher than in the cultures with 4 mM inorganic phosphate or in the in vivo calcified chick cartilage.

  17. Forensic Hair Differentiation Using Attenuated Total Reflection Fourier Transform Infrared (ATR FT-IR) Spectroscopy.

    Science.gov (United States)

    Manheim, Jeremy; Doty, Kyle C; McLaughlin, Gregory; Lednev, Igor K

    2016-07-01

    Hair and fibers are common forms of trace evidence found at crime scenes. The current methodology of microscopic examination of potential hair evidence is absent of statistical measures of performance, and examiner results for identification can be subjective. Here, attenuated total reflection (ATR) Fourier transform-infrared (FT-IR) spectroscopy was used to analyze synthetic fibers and natural hairs of human, cat, and dog origin. Chemometric analysis was used to differentiate hair spectra from the three different species, and to predict unknown hairs to their proper species class, with a high degree of certainty. A species-specific partial least squares discriminant analysis (PLSDA) model was constructed to discriminate human hair from cat and dog hairs. This model was successful in distinguishing between the three classes and, more importantly, all human samples were correctly predicted as human. An external validation resulted in zero false positive and false negative assignments for the human class. From a forensic perspective, this technique would be complementary to microscopic hair examination, and in no way replace it. As such, this methodology is able to provide a statistical measure of confidence to the identification of a sample of human, cat, and dog hair, which was called for in the 2009 National Academy of Sciences report. More importantly, this approach is non-destructive, rapid, can provide reliable results, and requires no sample preparation, making it of ample importance to the field of forensic science.

  18. FT-IR spectroscopic imaging of reactions in multiphase flow in microfluidic channels.

    Science.gov (United States)

    Chan, K L Andrew; Kazarian, Sergei G

    2012-05-01

    Rapid, in situ, and label-free chemical analysis in microfluidic devices is highly desirable. FT-IR spectroscopic imaging has previously been shown to be a powerful tool to visualize the distribution of different chemicals in flows in a microfluidic device at near video rate imaging speed without tracers or dyes. This paper demonstrates the possibility of using this imaging technology to capture the chemical information of all reactants and products at different points in time and space in a two-phase system. Differences in the rates of chemical reactions in laminar flow and segmented flow systems are also compared. Neutralization of benzoic acid in decanol with disodium phosphate in water has been used as the model reaction. Quantitative information, such as concentration profiles of reactant and products, can be extracted from the imaging data. The same feed flow rate was used in both the laminar flow and segmented flow systems. The laminar flow pattern was achieved using a plain wide T-junction, whereas the segmented flow was achieved by introducing a narrowed section and a nozzle at the T-junction. The results show that the reaction rate is limited by diffusion and is much slower with the laminar flow pattern, whereas the reaction is completed more quickly in the segmented flow due to better mixing.

  19. DIFERENCIACIÓN DE ESPECIE MICOBACTERIANA POR FT-IR (ESPECTROSCOPIA INFRARROJA CON TRANSFORMADA DE FOURIER

    Directory of Open Access Journals (Sweden)

    JORGE ANDRÉS CUÉLLAR GIL

    2011-01-01

    Full Text Available Se trabajó con espectroscopía infrarroja transformada de Fourier (FT-IR para diferenciar diez especies de micobacterias. Mycobacterium intracelullare y M. fortuitum (ATCC, M. flavensces , M. smegmatis , M. chelone , M. gordonae , M. triviale , M. vaccae , M. terrae y M. nonchromogenicum (IP. Como control de diferenciación de género se incluyó Staphylococcus aureus , Streptococcus viridans y Streptococcus pyogenes , Klebsiella pneumoniae y Escherichia coli , cada especie se corrió por triplicado en KBr y ATR. Los espectros se analizaron según el método de diferenciación de componentes principales, y se realizaron derivadas de primer orden (D1 en modalidad de transmisión usando la pastilla de KBr y la base ATR, además se diseñó una biblioteca espectral con la primera derivada de ATR. La sensibilidad de detección fue de 100% al trabajar con KBr y el nivel de diferenciación fue de 100% en tres de cuatro muestras problema.

  20. The deposition characteristics of copper(I) compounds for CVD by FT-IR spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Hardcastle, F.D.; Peden, C.H.F.; Omstead, T.R.; Blewer, R.S. [Sandia National Labs., Albuquerque, NM (United States); Farkas, J.; Hampden-Smith, M.J.; Kodas, T.T. [New Mexico Univ., Albuquerque, NM (United States)

    1991-12-31

    Fourier transform-infrared spectroscopy (FT-IR) was used to investigate the adsorption and thermally-induced decomposition of copper (I) {beta}-diketonate precursors of the type (hfac)CuL, where hfac is the hexafluoroacetylacetonate bidentate ligand and L is trimethylphosphine or 1,5-cyclooctadiene. The (hfac)CuPMe{sub 3} precursor desorbs from the surface at very low temperatures whereas the (hfac)Cu(1,5-COD) dissociates on adsorption, liberating 1,5-COD and leaving a surface(hfac)Cu complex which can subsequently disproportionate. Evidence is provided for hydrogen-bonding between the hfac ligand and the surface silanols for (hfac)CuPMe{sub 3}, but not for (hfac)Cu(1,5-COD). These results are consistent with the selective behavior of these precursors for copper deposition and suggest that the selectivity of the (hfac)CuPMe{sub 3} and (hfac)Cu(1, 5-COD) precursors may be due to the ability of the hfac ligand to hydrogen bond to the surface silanol groups.

  1. The deposition characteristics of copper(I) compounds for CVD by FT-IR spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Hardcastle, F.D.; Peden, C.H.F.; Omstead, T.R.; Blewer, R.S. (Sandia National Labs., Albuquerque, NM (United States)); Farkas, J.; Hampden-Smith, M.J.; Kodas, T.T. (New Mexico Univ., Albuquerque, NM (United States))

    1991-01-01

    Fourier transform-infrared spectroscopy (FT-IR) was used to investigate the adsorption and thermally-induced decomposition of copper (I) {beta}-diketonate precursors of the type (hfac)CuL, where hfac is the hexafluoroacetylacetonate bidentate ligand and L is trimethylphosphine or 1,5-cyclooctadiene. The (hfac)CuPMe{sub 3} precursor desorbs from the surface at very low temperatures whereas the (hfac)Cu(1,5-COD) dissociates on adsorption, liberating 1,5-COD and leaving a surface(hfac)Cu complex which can subsequently disproportionate. Evidence is provided for hydrogen-bonding between the hfac ligand and the surface silanols for (hfac)CuPMe{sub 3}, but not for (hfac)Cu(1,5-COD). These results are consistent with the selective behavior of these precursors for copper deposition and suggest that the selectivity of the (hfac)CuPMe{sub 3} and (hfac)Cu(1, 5-COD) precursors may be due to the ability of the hfac ligand to hydrogen bond to the surface silanol groups.

  2. Analysis of a Brazilian baroque sculpture using Raman spectroscopy and FT-IR

    Science.gov (United States)

    Freitas, Renato P.; Ribeiro, Iohanna M.; Calza, Cristiane; Oliveira, Ana L.; Felix, Valter S.; Ferreira, Douglas S.; Pimenta, André R.; Pereira, Ronaldo V.; Pereira, Marcelo O.; Lopes, Ricardo T.

    2016-02-01

    In this study, samples were taken from the sculpture of Our Lady of Sorrows and analyzed by Raman spectroscopy and FT-IR. This sculpture has been dated to the early eighteenth century. Samples were also examined using optical microscopy and Energy Dispersive Spectroscopy (EDS). Based on chemical analysis, the pigments vermilion [HgS], massicot [PbO] and azurite [Cu3(CO3)2(OH)2] were found in the sculpture polychrome. The results indicate that the green polychrome of the sculpture's mantle comes from the blending of massicot and azurite. Because the literature reports that the mantle of the Our Lady of Sorrows sculpture is blue, the mixing of these pigments results from a production error. The results also indicate the presence of Au in the sculpture, which indicates the originality of the piece. The results from this study helped restorers to choose the appropriate procedures for intervening in the sculpture and contributed to the knowledge about the manufacturing process of Brazilian baroque sculptures.

  3. FT-IR Studies of Cerium Oxide Nanoparticles and Natural Zeolite Materials

    Directory of Open Access Journals (Sweden)

    Oana Lelia Pop

    2015-05-01

    Full Text Available An emerging topic of our days is nanoscience and nanotechnology successfully applied in the food industry. Characteristics such as size, surface area and morphology can modify the basic properties and the chemical reactivity of the nanomaterials. The breakthrough of innovative materials, processes, and phenomena at the nanoscale, as well as the progress of new experimental and theoretical techniques for research, supply novel opportunities for the expansion of original nanosystems and nanostructured materials. These study examine two types of nanoparticles, namely cerium oxide nanoparticles (CeO2 NP and natural zeolites. In view of the importance of CeO2 NP in various biological applications, the primary objective of this study is to characterise four samples of CeO2 NP in order to understand the role of the synthesis process in the final product. Nanocrystalline natural zeolites are materials with interesting properties which allows them to be used as adjuvant in many therapies. The characterisation of CeO2 NP and two types of natural zeolites using Fourier Transform Infrared (FT-IR spectroscopy is described. Therefore, this study examined two types of nanomaterials, namely cerium oxide nanoparticles and zeolites, for further applications on microorganisms and living cells.

  4. Background defining during the imine formation reaction in FT-IR liquid cell

    Science.gov (United States)

    Namli, Hilmi; Turhan, Onur

    2006-05-01

    Imine formation is a very important chemical reaction because of its relevance to biological process. Therefore, it is crucial to follow whole reaction process in detail. The current work performed to monitor the whole imination reaction in real time in liquid cell by FT-IR spectroscopy. The complex spectral futures due to solvent, unreacted reagents, acid catalysis and other additives are eliminated by defining a background at the beginning or at any time during the reaction. This procedure also makes it possible to monitor the changes in the concentration of each component in the liquid cell. The consumption of the functional groups of the reagents results in absorbance due to the direct difference spectra while the appearance of functional groups is monitored as percentage transmittance. The concentration changes in the cell arising from the reaction gives the product spectra without having to isolate it from the mixture. It is also possible to see the intermediates appearing and disappearing during the reaction. This report also illustrates a brief application of the technique by time dependence of the peak highs in absorption (ABS) mode.

  5. An FT-IR study on intramolecular hydrogen-bonding in ethylene glycol derivatives

    Science.gov (United States)

    Singelenberg, F. A. J.; van der Maas, J. H.; Kroon-Batenburg, L. M. J.

    1991-05-01

    The OH-streching region of a number of mono-alkyl ethers of (poly) ethylene glycols in dilute CCl 4 solution has been investigated by FT-IR. Non-H-bonded conformers are observed in addition to intramolecularly H-bonded ones. Different H-bonds can be distinguished when more than one ether-oxygen is present. The frequency of the non-bonded conformer is identical for all compounds and the same holds for the 5-R conformer. Furthermore the relative intensities of these peaks are identical in all spectra. The OH-frequency of the 8-R and 11-R conformers depends on the length and the type of the chain substituted at O(3) and O(4), respectively. MM2 calculations have been carried out for some of the compounds. The stability of the conformers proves to be in the order 11-R&>;5-R&>;;8-R&>; non-H-bonded. Interatomic distances and angles indicate that the H-bonds in the 8-R and 11-R conformers are bifurcated and "trifurcated", respectively.

  6. Evaluation of angle dependence in spectral emissivity of ceramic tiles measured by FT-IR

    Science.gov (United States)

    Kobayashi, C.; Ogasawara, N.; Yamada, H.; Yamada, S.; Kikuchi, T.

    2015-05-01

    Ceramic tiles are widely used for building walls. False detections are caused in inspections by infrared thermography because of the infrared reflection and angle dependence of emissivity. As the first problem, ceramic tile walls are influenced from backgrounds reflection. As the second problem, in inspection for tall buildings, the camera angles are changed against the height. Thus, to reveal the relation between the emissivity and angles is needed. However, there is very little data about it. It is impossible to decrease the false detection on ceramic tile walls without resolving these problems; background reflection and angle dependence of emissivity. In this study, the angle problem was investigated. The purpose is to establish a revision method in the angle dependence of the emissivity for infrared thermography. To reveal the relation between the emissivity and angles, the spectral emissivity of a ceramic tile at various angles was measured by FT-IR and infrared thermographic instrument. These two experimental results were compared with the emissivity-angle curves from the theoretical formula. In short wavelength range, the two experimental results showed similar behavior, but they did not agree with the theoretical curve. This will be the subject of further study. In long wavelength range, the both experimental results almost obeyed the theoretical curve. This means that it is possible to revise the angle dependence of spectral emissivity, for long wavelength range.

  7. Analysis of urinary stone constituents using powder X-ray diffraction and FT-IR

    Indian Academy of Sciences (India)

    Pragnya A Bhatt; Parimal Paul

    2008-03-01

    Constituents of urinary stones obtained from various patients from western part of India, which is a highly urinary stone disease-prone area, have been analysed. Eight stones from four patients were collected through urologists and have been analysed using powder X-ray diffraction and FT-IR. Thermogravimetric analysis (TGA) and scanning electron microscopic (SEM) image of selected samples were also carried out. The analysis revealed that calcium oxalate monohydrate, which is also known as whewellite, is the common constituent of all of the stones, particularly at the initial stage of stone formation. However, multi phases viz. whewellite phase, and hydroxyl and carbonate apatite phases are also detected in the case of third and fourth patients, from where multiple stones were obtained. Interestingly, in these mixed phase stones the concentration of whewellite decreases with increasing the concentration of apatite phases. Thermal behaviour of the whewellite phase was studied by TGA and variable temperature XRD analysis. Morphology of the whewellite and apatite phases, examined by SEM image, has also been reported.

  8. Determinação do teor de NR/SBR em misturas: associação de dados DTG e FT-IR Determination of NR/SBR content in blends: combining DTG and FT-IR data

    OpenAIRE

    Rita C. L. Dutra; Milton F. Diniz; Ribeiro,Ana P.; Lourenço,Vera L.; Silvana N. Cassu; Azevedo,Margarete F. P.

    2004-01-01

    Misturas contendo teor conhecido de borracha natural (NR) e copolímero de butadieno e estireno (SBR) foram preparadas nos laboratórios do CTA e do IFOCA como amostras de referência para a elaboração de uma curva analítica, visando à determinação do teor de NR e SBR por análise pirólise/FT-IR. Termogravimetria foi usada para determinar o teor real de NR e SBR nas misturas por meio da razão entre as alturas dos picos da curva derivada (DTG). As bandas FT-IR escolhidas na região MIR foram 885 cm...

  9. Analysis of Organic Inclusions Using Fluorescence Microscopy and Micro-FT. IR Techniques

    Institute of Scientific and Technical Information of China (English)

    李荣西; 杜向民; 迟元林

    2001-01-01

    Organic inclusions from the Shahejie Formation of the Eogene period in the Bohai Gulf Basin, eastern China, were examined using micro-FT. IR and fluorescence microscopy in addition to the measurement of their homogenization temperatures (Th). Two populations of organic inclusions were recognized, the primary and the secondary organic inclusions. The primary organic inclusions contain organic materials with relatively long alkyl chains (the carbon atom number is 15 to 17), whereas the secondary organic inclusions contain a certain amount of H2S besides organic materials which have relatively short alkyl chains with the carbon atom number of 5 to 6. The Th values of the primary organic inclusions are within the range of 87-91℃, lower than those of the secondary organic inclusions ( Th = 98 - 105℃ ), suggesting that the primary organic inclusions experienced a lower degree of thermal evolution than the secondary inclusions. This inference is consistent with the fluorescence spectroscopic characteristics and parameters ( Tmax, Q values) of the organic inclusions. Data from the organic inclusions together with the petroleum geology setting revealed that the primary inclusions resulted from the migration of hydrocarbons generated within the strata they are hosted, whereas the secondary organic inclusions were trapped in the process of secondary hydrocarbons expelled out of the source rocks to the locations where they were accumulated. The thermal properties of the organic inclusions are consistent with the maturation of the oil generated from the Shahejie Formation. The abundance of the organic inclusions and their characteristics indicate that the member Es3 of the Shahejie Formation is highly potential for oil accumulation. The results could provide essential clues to petroleum exploration in the Bohai Gulf Basin.

  10. Analysis of Organic Inclusions Using Fluorescence Microscopy and Micro-FT.IR Techniques

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Organic inclusions from the Shahejie Formation of the Eogene period in the Bohai Gulf Basin,eastern China,were examined using micro-FT.IR and fluorescence microscopy in addition to the measurement of their homogenization temperatures(Th).Two populations of organic inclusions were recognized,the primary and the secondary organic inclusions.The primary organic inclusions contain organic materials with relatively long alkyl chains(the carbon atom number is 15 to 17),whereas the secondary organic inclusions contain a certain amount of H2S besides organic materials which have relatively short alkyl chains with the carbon atom number of 5 to 6.The Th values of the primary organic inclusions within the rage of 87-91℃,lower than those of the secondary organic inclusions(Th=98-105℃),sugesting that the primary organic inclusions experienced a lower degree of thermal evolution than the secondary inclusions.This inference is consistent with the fluorescence spectroscopic characteristics and parameters(Tmax,Q values)of the organic inclusions.Data from the organic inclusions together with the petroleum geology setting revealed that the primary inclusions resulted from the migration of hydrocarbons generated within the strata they are hosted,whereas the secondary organic inclusions were trapped in the process of secondary hydrocarbons expelled out of the source rocks to the locations where they were accumulated.The thermal properties of the organic inclusions are consistent with the maturation of the oil generated from the Shahejie Formation.The abundance of the organic inclusions and their characteristics indicate that the member Es3 of the Shaheije Formation is highly potential for oil accumulation.The results could provide essential coues to petroleum exploration in the Bohai Gulf Basic.

  11. Improved soil carbonate determination by FT-IR and X-ray analysis

    Science.gov (United States)

    Bruckman, Viktor; Wriessnig, Karin

    2013-04-01

    In forest soils on calcareous parent material, carbonate is a key component which influences both chemical and physical soil properties and thus fertility and productivity. At low organic carbon contents it is difficult to distinguish between organic and inorganic carbon (carbonate) in soils. The common gas-volumetric method to determine carbonate has a number of disadvantages. We hypothesize that a combination of two spectroscopic methods, which account for different forms of carbonate, can be used to model soil carbonate in our study region. Fourier Transform Mid-Infrared Spectroscopy (FT-MIR) was combined with X-ray diffraction (XRD) to develop a model based on partial least squares regression (PLSR). Results of the gas-volumetric Scheibler method were corrected for the calcite/dolomite ratio. The best model performance was achieved when we combined the two analytical methods using four principal components. The root mean squared error of prediction decreased from 13.07 to 11.57, while full cross-validation explained 94.5% of the variance of the carbonate content. This is the first time that a combination of the proposed methods has been used to predict carbonate in forest soils, offering a simple and cheap method to precisely estimate soil carbonate contents while increasing accuracy in comparison to spectroscopic approaches proposed earlier. This approach has the potential to complement or substitute gas-volumetric methods, specifically in study areas with low soil heterogeneity and similar parent material or in long-term monitoring by consecutive sampling. Reference: Bruckman, V. and K. Wriessnig, Improved soil carbonate determination by FT-IR and X-ray analysis. Environmental Chemistry Letters, 2012: p. 1-6. [DOI:DOI 10.1007/s10311-012-0380-4

  12. Fluorescence EEM and FT-IR analyses for examination of soil organic matter compositions affected by incubation conditions

    Science.gov (United States)

    Kim, Eun-Ah; Vo-Minh Nguyen, Hang; Choi, Jung Hyun

    2015-04-01

    This study investigated the effects of soil drying-rewetting, nitrogen deposition, and temperature rise on the changes in dissolved soil organic matter quantities and their compositions.A PARAFAC method was employed to analyze the changes in the sub-fractions of fluorescent DOM components, which revealed that the dry forest soil accumulated relatively more amino acid type DOM than humic-like substances whereas the other soil groups showed the opposite trend.Nitrogen deposition, and temperature rise did not induce significant changes in the fluorescent DOM components. FT-IR analysis results were compared with the fluorescence EEM results, which provided complementary information about the characteristic functional groups of DOM. A principal component analysis (PCA) with the PARAFAC component scores, and the intensity ratios of representative FT-IR peaks gave a comprehensive interpretation on the changes of DOM compositions in response to the variations in the incubation conditions.

  13. An FT-IR and DFT study of the free and solvated 4-(imidazol-1-yl)phenol.

    Science.gov (United States)

    Yurdakul, Şenay; Badoğlu, Serdar

    2015-11-05

    In this study, FT-IR spectrum of 4-(imidazol-1-yl)phenol was recorded. Its vibrational frequencies and modes were determined. Vibrational assignments were proposed with the help of B3LYP/6-311++G(d,p) level of calculations. Three possible dimeric forms of the molecule were investigated theoretically. Besides, solvent effects on the structure, vibrational frequencies, and atomic charges were studied theoretically. Water, dimethyl sulfoxide, and ethanol were the solvents considered. Experimental FT-IR spectrum in DMSO solution was recorded and compared with solid phase experimental data. DFT B3LYP combined with polarized continuum model (PCM) was employed to characterize the solvent effects. Copyright © 2015 Elsevier B.V. All rights reserved.

  14. Kinetics and evolved gas analysis for pyrolysis of food processing wastes using TGA/MS/FT-IR.

    Science.gov (United States)

    Özsin, Gamzenur; Pütün, Ayşe Eren

    2017-06-01

    The objective of this study was to identify the pyrolysis of different bio-waste produced by food processing industry in a comprehensible manner. For this purpose, pyrolysis behaviors of chestnut shells (CNS), cherry stones (CS) and grape seeds (GS) were investigated by thermogravimetric analysis (TGA) combined with a Fourier-transform infrared (FT-IR) spectrometer and a mass spectrometer (MS). In order to make available theoretical groundwork for biomass pyrolysis, activation energies were calculated with the help of four different model-free kinetic methods. The results are attributed to the complex reaction schemes which imply parallel, competitive and complex reactions during pyrolysis. During pyrolysis, the evolution of volatiles was also characterized by FT-IR and MS. The main evolved gases were determined as H2O, CO2 and hydrocarbons such as CH4 and temperature dependent profiles of the species were obtained. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. FT-Raman and QM/MM study of the interaction between histamine and DNA

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz-Chica, A.J. [Departamento de Quimica Fisica, Facultad de Ciencias, Universidad de Malaga, 29071 Malaga (Spain); Soriano, A. [Departamento de Quimica Fisica/IcMol, Facultad de Quimicas, Universidad de Valencia, 46100 Burjassot Valencia (Spain); Tunon, I. [Departamento de Quimica Fisica/IcMol, Facultad de Quimicas, Universidad de Valencia, 46100 Burjassot Valencia (Spain); Sanchez-Jimenez, F.M. [Departamento de Bioquimica y Biologia Molecular, Facultad de Ciencias, Universidad de Malaga, 29071 Malaga (Spain); Silla, E. [Departamento de Quimica Fisica/IcMol, Facultad de Quimicas, Universidad de Valencia, 46100 Burjassot Valencia (Spain); Ramirez, F.J. [Departamento de Quimica Fisica, Facultad de Ciencias, Universidad de Malaga, 29071 Malaga (Spain)], E-mail: ramirez@uma.es

    2006-05-31

    The interaction between histamine and highly polymerized calf-thymus DNA has been investigated using FT-Raman spectroscopy and the hybrid QM/MM (quantum mechanics/molecular mechanics) methodology. Raman spectra of solutions containing histamine and calf-thymus DNA, at different molar ratios, were recorded. Solutions were prepared at physiological settings of pH and ionic strength, using both natural and heavy water as the solvent. The analysis of the spectral changes on the DNA Raman spectra when adding different concentrations of histamine allowed us to identify the reactive sites of DNA and histamine, which were used to built two minor groove and one intercalated binding models. They were further used as starting points of the QM/MM theoretical study. However, minimal energy points were only reached for the two minor groove models. For each optimized structure, we calculated analytical force constants of histamine molecule in order to perform the vibrational dynamics. Normal mode descriptions allowed us to compare calculated wavenumbers for DNA-interacting histamine to those measured in the Raman spectra of DNA-histamine solutions.

  16. Mild acid hydrolysis of fucoidan: characterization by electrophoresis and FT-Raman spectroscopy.

    Science.gov (United States)

    Pielesz, A; Biniaś, W; Paluch, J

    2011-09-27

    Along with proteins, lipids, water and minerals, polysaccharides are the main chemical compounds of which macroalgae are built. Among the chemical compounds now widely examined is fucoidan (fucan, fucosan, sulfate fucan or sulfated fucan), a fucose-containing sulfated polysaccharide. Fucoidans isolated from different species have been extensively studied because of their varied biological properties, including anticoagulant and antitumor effects. Methodology based on mild acid hydrolysis can be used as an efficient tool to study the relationship between molecular weight of the sulfated polysaccharides and their biological activities. Anticancer activity of fucoidans can be significantly enhanced by lowering their molecular weight only when they are depolymerized under mild conditions. In this study, fucoidan was identified during extraction with H(2)SO(4) and HCl; its presence was confirmed by FT-Raman spectroscopy in aqueous solution. In particular, shifts at 840cm(-1) were analysed, which are due to the presence of sulfate at the axial C-4 position, as were the shifts at about 811-809cm(-1), for which the sulfated fucoidan is responsible. Shifts of electrophoretic bands of fucoidan resulting from mild acid hydrolysis in H(2)SO(4) and HCl were also analysed. The analytical procedure was developed using apparatus for cellulose acetate membrane electrophoresis and this was supplemented by semi-quantitative analysis.

  17. Assessment of the discrimination of animal fat by FT-Raman spectroscopy

    Science.gov (United States)

    Abbas, O.; Fernández Pierna, J. A.; Codony, R.; von Holst, C.; Baeten, V.

    2009-04-01

    In recent years, there has been an increased attention towards the composition of feeding fats. In the aftermath of the BSE crisis all animal by-products utilised in animal nutrition have been subjected to close scrutiny. Regulation requires that the material belongs to the category of animal by-products fit for human consumption. This implies the use of reliable techniques in order to insure the safety of products. The feasibility of using rapid and non-destructive methods, to control the composition of feedstuffs on animal fats has been studied. Fourier Transform Raman spectroscopy has been chosen for its advantage to give detailed structural information. Data were treated using chemometric methods as PCA and PLS-DA which have permitted to separate well the different classes of animal fats. The same methodology was applied on fats from various types of feedstock and production technology processes. PLS-DA model for the discrimination of animal fats from the other categories presents a sensitivity and a specificity of 0.958 and 0.914, respectively. These results encourage the use of FT-Raman spectroscopy to discriminate animal fats.

  18. FT-Raman and QM/MM study of the interaction between histamine and DNA

    Science.gov (United States)

    Ruiz-Chica, A. J.; Soriano, A.; Tuñón, I.; Sánchez-Jiménez, F. M.; Silla, E.; Ramírez, F. J.

    2006-05-01

    The interaction between histamine and highly polymerized calf-thymus DNA has been investigated using FT-Raman spectroscopy and the hybrid QM/MM (quantum mechanics/molecular mechanics) methodology. Raman spectra of solutions containing histamine and calf-thymus DNA, at different molar ratios, were recorded. Solutions were prepared at physiological settings of pH and ionic strength, using both natural and heavy water as the solvent. The analysis of the spectral changes on the DNA Raman spectra when adding different concentrations of histamine allowed us to identify the reactive sites of DNA and histamine, which were used to built two minor groove and one intercalated binding models. They were further used as starting points of the QM/MM theoretical study. However, minimal energy points were only reached for the two minor groove models. For each optimized structure, we calculated analytical force constants of histamine molecule in order to perform the vibrational dynamics. Normal mode descriptions allowed us to compare calculated wavenumbers for DNA-interacting histamine to those measured in the Raman spectra of DNA-histamine solutions.

  19. Synthesis, FTIR, FT-Raman, UV-visible, ab initio and DFT studies on benzohydrazide.

    Science.gov (United States)

    Arjunan, V; Rani, T; Mythili, C V; Mohan, S

    2011-08-01

    A systematic vibrational spectroscopic assignment and analysis of benzohydrazide (BH) has been carried out by using FTIR and FT-Raman spectral data. The vibrational analysis were aided by electronic structure calculations--ab initio (RHF) and hybrid density functional methods (B3LYP and B3PW91) performed with 6-31G(d,p) and 6-311++G(d,p) basis sets. Molecular equilibrium geometries, electronic energies, IR intensities, harmonic vibrational frequencies, depolarization ratios and Raman activities have been computed. Potential energy distribution (PED) and normal mode analysis have also been performed. The assignments proposed based on the experimental IR and Raman spectra have been reviewed and complete assignment of the observed spectra have been proposed. UV-visible spectrum of the compound was also recorded and the electronic properties, such as HOMO and LUMO energies and λ(max) were determined by time-dependent DFT (TD-DFT) method. The geometrical, thermodynamical parameters and absorption wavelengths were compared with the experimental data. The interactions of carbonyl and hydrazide groups on the benzene ring skeletal modes were investigated. Copyright © 2011 Elsevier B.V. All rights reserved.

  20. Knoop microhardness and FT-Raman evaluation of composite resins: influence of opacity and photoactivation source

    Directory of Open Access Journals (Sweden)

    Luis Gustavo Barrotte Albino

    2011-06-01

    Full Text Available The aim of this study was to evaluate the degree of conversion by Knoop microhardness (KHN and FT-Raman spectroscopy (FTIR of one nanofilled (Filtek Supreme-3M-ESPE [FS] and one microhybrid composite (Charisma-Heraeus-Kulzer [CH], each with different opacities, namely enamel, dentin, and translucent, which were photo-activated by a quartz-tungsten-halogen lamp (QTH and a light-emitting diode (LED. Resin was bulk inserted into a disc-shaped mold that was 2.0 mm thick and 4 mm in diameter, obtaining 10 samples per group. KHN and FTIR values were analyzed by two-way ANOVA and Tukey's tests (α = 0.05. Nanofilled resin activated by a LED presented higher microhardness values than samples activated by a QTH for dentin opacity (p < 0.05. The microhybrid resin showed no differences in KHN or FTIR values with different activation sources or opacity. The nanofilled dentin and enamel resins showed lower FTIR values than the translucent resin. The KHN values of the translucent resins were not influenced by the light source.

  1. Probing organic ligands and their binding schemes on nanocrystals by mass spectrometric and FT-IR spectroscopic imaging

    Science.gov (United States)

    Son, Jin Gyeong; Choi, Eunjin; Piao, Yuanzhe; Han, Sang Woo; Lee, Tae Geol

    2016-02-01

    We report an analysis method to identify conjugated ligands and their binding states on semiconductor nanocrystals based on their molecular information. Surface science techniques, such as time-of-flight secondary-ion mass spectrometry (ToF-SIMS) and FT-IR spectroscopy, are adopted based on the micro-aggregated sampling method. Typical trioctylphosphine oxide-based synthesis methods of CdSe/ZnS quantum dots (QDs) have been criticized because of the peculiar effects of impurities on the synthesis processes. Because the ToF-SIMS technique provides molecular composition evidence on the existence of certain ligands, we were able to clearly identify n-octylphosphonic acid (OPA) as a surface ligand on CdSe/ZnS QDs. Furthermore, the complementary use of the ToF-SIMS technique with the FT-IR technique could reveal the OPA ligands' binding state as bidentate complexes.We report an analysis method to identify conjugated ligands and their binding states on semiconductor nanocrystals based on their molecular information. Surface science techniques, such as time-of-flight secondary-ion mass spectrometry (ToF-SIMS) and FT-IR spectroscopy, are adopted based on the micro-aggregated sampling method. Typical trioctylphosphine oxide-based synthesis methods of CdSe/ZnS quantum dots (QDs) have been criticized because of the peculiar effects of impurities on the synthesis processes. Because the ToF-SIMS technique provides molecular composition evidence on the existence of certain ligands, we were able to clearly identify n-octylphosphonic acid (OPA) as a surface ligand on CdSe/ZnS QDs. Furthermore, the complementary use of the ToF-SIMS technique with the FT-IR technique could reveal the OPA ligands' binding state as bidentate complexes. Electronic supplementary information (ESI) available: Additional data (Fig. S1-S5). See DOI: 10.1039/c5nr07592k

  2. Identification of urushi coated films taken from ancient Buddha images by using PIXE, FT-IR, and organic elemental analysis

    Energy Technology Data Exchange (ETDEWEB)

    Kagemori, N.; Umemura, K.; Yoshimura, T.; Inoue, M.; Kawai, S. [Wood Research Institute, Kyoto Univ., Uji, Kyoto (Japan); Yano, K. [Tokyo National University of Fine Arts and Music, Uenokouen, Tokyo (Japan); Sera, K. [Cyclotron Research Center, Iwate Medical Univ., Takizawa, Iwate (Japan); Futatsugawa, S. [Nishina Memorial Cyclotron Center, Japan Radioisotope Association, Takizawa, Iwate (Japan); Nakamura, Y. [Kyoto National Museum, Higashiyama, Kyoto (Japan)

    1999-07-01

    Six types of samples including urushi, urushi tree and black coating films taken from ancient Buddha images were examined by analyses of PIXE, organic element and FT-IR to identify with urushi or another material. Based on the results of three analytical experiments above mentioned, the coating materials aging over hundreds of years were identified with weathered urushi films mixed with other material. Further investigation may reveal the urushi coating techniques used in the past. (author)

  3. Application of FT-IR microspectroscopy to the study of an injectable composite for bone and dental surgery.

    OpenAIRE

    Weiss, Pierre; Bohic, Sylvain; Lapkowski, Mieczyslaw; Daculsi, Guy

    1998-01-01

    Hydroxypropylmethylcellulose (HPMC) of high-viscosity grade is used as a ligand for a bioactive calcium phosphate ceramic (the filler) in a ready-to-use injectable sterilized biomaterial for bone and dental surgery. Application of physico-chemical methods such as XPS, NMR, or Raman spectroscopy encounters difficulties when used to study such a multiphased material. This paper reports on the application of FT-IR microspectroscopy (FT-IRM) for the investigation of inorganic and organic phases o...

  4. Orchids and Bee's Knees: Investigating the Euglossine Syndrome with Gas Chromatography/Fourier Transform Infrared GC/FT-IR

    Science.gov (United States)

    McClure, Gregory L.; Williams, N. H...; Whitten, W. M.

    1985-12-01

    The GC/FT-IR analysis of a fragrance obtained from a Gongora tricolor orchid is described. The significance of this type of analysis is explained in terms of the elucidation of the complex relationship between orchids and bees known as "The Euglossine Syndrome". The fragrance sample was found to contain p-cresol, p-methylanisole and a variety of terpenoids, including myrcene, cineole, limonene, cymene, ipsdienol, and an olefinic product which appears to be the dehydration product of ipsdienol.

  5. Has your ancient stamp been regummed with synthetic glue? A FT-NIR and FT-Raman study.

    Science.gov (United States)

    Simonetti, Remo; Oliveri, Paolo; Henry, Adrien; Duponchel, Ludovic; Lanteri, Silvia

    2016-01-01

    The potential of FT-NIR and FT-Raman spectroscopies to characterise the gum applied on the backside of ancient stamps was investigated for the first time. This represents a very critical issue for the collectors' market, since gum conditions heavily influence stamp quotations, and fraudulent application of synthetic gum onto damaged stamp backsides to increase their desirability is a well-documented practice. Spectral data were processed by exploratory pattern recognition tools. In particular, application of principal component analysis (PCA) revealed that both of the spectroscopic techniques provide information useful to characterise stamp gum. Examination of PCA loadings and their chemical interpretation confirmed the robustness of the outcomes. Fusion of FT-NIR and FT-Raman spectral data was performed, following both a low-level and a mid-level procedure. The results were critically compared with those obtained separately for the two spectroscopic techniques.

  6. Determination of chemical changes in heat-treated wood using ATR-FTIR and FT Raman spectrometry

    Science.gov (United States)

    Özgenç, Özlem; Durmaz, Sefa; Boyaci, Ismail Hakki; Eksi-Kocak, Haslet

    2017-01-01

    In this study, attenuated total reflectance-Fourier transform infrared (ATR-FTIR) and Fourier-transform Raman (FT-Raman) spectroscopy techniques were used to determine changes in the chemical structure of heat-treated woods. For this purpose, scots pine (Pinus sylvestris L.), oriental beech (Fagus orientalis L.), and oriental spruce (Picea orientalis L.) wood species were heat-treated at different temperatures. The effect of chemical changes on the FT-Raman and ATR-FTIR bands or ratios of heat-treated wood was related with the OH association of cellulose, functional groups, and the aromatic system of lignin. The effects of heat treatment on the carbohydrate and lignin peaks varied depending on the wood species. The spectral changes that occurred after heat treatment reflected the progress of the condensation reaction of lignin. Degradation of hemicelluloses led to a decrease in free hydroxyl groups. High temperature caused crystalline cellulose to increase due to the degradation of amorphous cellulose.

  7. FT-IR, Raman and thermoluminescence investigation of P 2O 5-BaO-Li 2O glass system

    Science.gov (United States)

    Ivascu, C.; Timar Gabor, A.; Cozar, O.; Daraban, L.; Ardelean, I.

    2011-05-01

    The 0.5P 2O 5· xBaO·(0.5- x) Li 2O glass system (0 ⩽ x ⩽ 0.5 mol%) is investigated by FT-IR, Raman and thermoluminescence as a possible dosimetic material. FT-IR and Raman spectra show structural network modifications with the composition variations of the studied glasses. The predominant absorption band from IR spectra is attributed to the symmetric stretching vibrations of P = O double bonds. Raman spectra of the studied glasses contain also typical phosphate glasses bands. Thus the band at ˜700 cm -1 is assigned to symmetric stretching vibrations of P-O-P groups and that from ˜1158 cm -1 is attributed to symmetric stretching motions of the non-bridging oxygen (NBO) atoms bonded to phosphorous atoms (PO 2) in phosphate tetrahedron. Finally FT-IR and Raman spectroscopies revealed a local network structure mainly based on Q 2 and Q 3 tetrahedrons connected by P-O-P linkages. Luminescence investigations show that by adding modifier oxides to phosphate glass dose dependent TL signals result upon irradiation. Thus P 2O 5-BaO-Li 2O glass system is a possible candidate material for dosimetry in the high dose range (>10 Gy).

  8. Biochemical Monitoring of Spinal Cord Injury by FT-IR Spectroscopy—Effects of Therapeutic Alginate Implant in Rat Models

    Science.gov (United States)

    Uckermann, Ortrud; Sitoci-Ficici, Kerim H.; Later, Robert; Beiermeister, Rudolf; Doberenz, Falko; Gelinsky, Michael; Leipnitz, Elke; Schackert, Gabriele; Koch, Edmund; Sablinskas, Valdas; Steiner, Gerald; Kirsch, Matthias

    2015-01-01

    Spinal cord injury (SCI) induces complex biochemical changes, which result in inhibition of nervous tissue regeneration abilities. In this study, Fourier-transform infrared (FT-IR) spectroscopy was applied to assess the outcomes of implants made of a novel type of non-functionalized soft calcium alginate hydrogel in a rat model of spinal cord hemisection (n = 28). Using FT-IR spectroscopic imaging, we evaluated the stability of the implants and the effects on morphology and biochemistry of the injured tissue one and six months after injury. A semi-quantitative evaluation of the distribution of lipids and collagen showed that alginate significantly reduced injury-induced demyelination of the contralateral white matter and fibrotic scarring in the chronic state after SCI. The spectral information enabled to detect and localize the alginate hydrogel at the lesion site and proved its long-term persistence in vivo. These findings demonstrate a positive impact of alginate hydrogel on recovery after SCI and prove FT-IR spectroscopic imaging as alternative method to evaluate and optimize future SCI repair strategies. PMID:26559822

  9. Biochemical Monitoring of Spinal Cord Injury by FT-IR Spectroscopy--Effects of Therapeutic Alginate Implant in Rat Models.

    Directory of Open Access Journals (Sweden)

    Sandra Tamosaityte

    Full Text Available Spinal cord injury (SCI induces complex biochemical changes, which result in inhibition of nervous tissue regeneration abilities. In this study, Fourier-transform infrared (FT-IR spectroscopy was applied to assess the outcomes of implants made of a novel type of non-functionalized soft calcium alginate hydrogel in a rat model of spinal cord hemisection (n = 28. Using FT-IR spectroscopic imaging, we evaluated the stability of the implants and the effects on morphology and biochemistry of the injured tissue one and six months after injury. A semi-quantitative evaluation of the distribution of lipids and collagen showed that alginate significantly reduced injury-induced demyelination of the contralateral white matter and fibrotic scarring in the chronic state after SCI. The spectral information enabled to detect and localize the alginate hydrogel at the lesion site and proved its long-term persistence in vivo. These findings demonstrate a positive impact of alginate hydrogel on recovery after SCI and prove FT-IR spectroscopic imaging as alternative method to evaluate and optimize future SCI repair strategies.

  10. Lipid Characterization of White, Dark, and Milk Chocolates by FT-Raman Spectroscopy and Capillary Zone Electrophoresis.

    Science.gov (United States)

    de Oliveira, Leandra Natália; de Jesus Coelho Castro, Renata; de Oliveira, Marcone Augusto Leal; de Oliveira, Luiz Fernando C

    2015-01-01

    There are few studies about different types of chocolate and their chemical characterization by Fourier transform (FT)-Raman spectroscopy and capillary zone electrophoresis (CZE). The aim of this study was to evaluate the lipid profile of different types of Brazilian chocolate through characterization by FT-Raman spectroscopy and identification and quantification of major fatty acids (FAs) by CZE to confirm FT-Raman spectrometry results. It was found that the main spectroscopic profile difference of the chocolate samples analyzed was related to the presence of saturated or unsaturated FAs. Well defined bands at approximately 1660, 1267, and 1274 cm(-1) corresponding to vibrational modes of unsaturated FAs (UnFAs) were found only in the spectra of samples with cocoa butter in their composition according to label specifications, mainly in dark chocolate samples. The FA identification and quantification by CZE found the presence of stearic (18:0) and palmitic (16:0) acids as the major saturated FAs in all chocolate samples. Dark chocolate samples showed the highest levels of oleic (cis-9 18:1) and linoleic (cis, cis -9,12 18:2) UnFAs monitored and the lowest levels of 14:0 in their chemical composition. Samples coded as 02 (with not only cocoa butter in their composition according to label) had the highest levels of 14:0 (FA not present in cocoa butter composition) corresponding to label information and inferring the presence of other fat sources, called cocoa butter substitutes, mainly for milk and white chocolate samples. This study suggests FT-Raman spectroscopy is a powerful technique that can be used to chemically characterize the chocolate lipid fraction, and CZE is a tool able to confirm Raman spectroscopy results and identify and quantify the major FAs in chocolate samples.

  11. Comparative spectral analysis of commercial fuel-ethanol blends using a low-cost prototype FT-Raman spectrometer

    Science.gov (United States)

    Ortega Clavero, Valentin; Weber, Andreas; Schröder, Werner; Meyrueis, Patrick; Javahiraly, Nicolas

    2012-06-01

    The use of bio-fuels and fuel blends, specially in automotive industry, has been increasing substantially in recent years due to market prices and trends on sustainable development policies. Different spectral analysis techniques for quality control, production, purity, and counterfeit detection have been reported as non-invasive, fast, and price accessible. Raman spectra from three different commercial binary E10 fuel-ethanol blends has been obtained by using a low-cost Fourier-Transform Raman spectrometer (FT-Raman). Qualitative comparison between the commercial fuel blends and a laboratory-prepared fuel blend have been performed. The characteristic Raman lines from some additives contained in the commercial gasoline have been also observed. The spectral information is presented in the range of 0 cm-1 to 3500 cm-1 with a resolution of 1.66 cm-1. These Raman spectra shows reduced frequency deviation (less than 0.4 cm-1 when compared to standard Raman spectra from cyclohexane and toluene without compensation for instrumental response). Higher resolution values are possible, since the greater optical path lengths of the FT-Raman are achievable before the instrumental physical effects appear. The robust and highly flexible FT-Raman prototype proposed for the spectral analysis, consisting mainly of a Michelson interferometer and a self-designed photon counter, is able to deliver high resolution and precise Raman spectra with no additional complex hardware or software control. The mechanical and thermal disturbances affecting the FT-Raman system are mathematically compensated by extracting the optical path information from the generated interference pattern of a λ=632.8 nm Helium-Neon laser (HeNe laser), which is used at the spectrum evaluation.

  12. Non-destructive NIR-FT-raman analyses in practice. Part II. Analyses of 'jumping' crystals, photosensitive crystals and gems.

    Science.gov (United States)

    Andreev, G N; Schrader, B; Boese, R; Rademacher, P; von Cranach, L

    2001-12-01

    Using an improved sampling arrangement we observed the FT Raman spectra of the different phases of a 'jumping crystal', an inositol derivative. The phase transition produced--as consequences of large changes of the unit cell constants--changes in frequency and intensity mainly of CH deformation vibrations. Photochemical reactions, usually produced with light quanta in the visible range, are not activated with the quanta from the Nd:YAG laser at 1064 nm. The Raman spectra of the 'dark' form of a dinitrobenzyl pyridine and afterwards the 'light' form, the product of its illumination in the visible range, were recorded. We could not observe changes of most bands, especially not of the NO2-vibrations; however, a new strong band appeared at 1253 cm(-1), which may be due to the expected NH-photo-isomer. Genuine gemstones and fakes can be unambiguously identified by FT Raman spectroscopy. This is especially useful for the stones whose physical properties are quite similar to those of diamonds--moissanite and zirconia. The quality of diamonds can be estimated from relative band intensities; however, this is not in complete agreement with the internationally accepted visual qualification. Synthetic diamonds produced by CVD (chemical vapor deposition) show remarkable differences from natural ones in their FT-Raman spectra.

  13. [The effect of Tween-80 on the differentiation of Trichophyton mentagrophytes and Trichophyton rubrum strains with FT-IR spectroscopy].

    Science.gov (United States)

    Ergın, Çagri; İlkit, Macit; Gök, Yaşar; Çon, Ahmet Hilmi; Özel, Mustafa Zafer; Kabay, Nilgün; Döğen, Aylin; Baygu, Yasemin

    2014-07-01

    Trichophyton mentagrophytes and Trichophyton rubrum, are two of the frequently identified dermatophyte species in routine microbiology laboratories. Although newer technologies may assist in species-level identification, direct application of these methods usually require improvement in order to obtain reliable identification of these species. Earlier data have shown that dermatophytes may be identified with FT-IR spectroscopy although there are some limitations. In particular, the organic bond ranges in FT-IR spectra showed more irregularity because of the eucaryotic complexity of the molds. In this study, Tween-80 which is an inorganic molecule, was added to the dermatophyte growth medium in order to investigate its effect on FT-IR spectroscopy analysis of dermatophytes. Nine reference dermatophyte strains [5 T.mentagrophytes complex (T.asteroides CBS 424.63, T.erinacei CBS 344.79, CBS 511.73, CBS 677.86, T.mentagrophytes CBS 110.65) and 4 T.rubrum complex strains with different morphotypes (T.fluviomuniense CBS 592.68, T.kuryangei CBS 422.67, T.raubitschekii CBS 102856, T.rubrum CBS 392.58)] were included in the study. All strains were cultured on Sabouraud glucose agar either with or without 1% Tween-80 for three weeks. After the incubation period, superficial scrapings from each dermatophyte colony were analyzed using FT-IR spectroscopy. All measurements were performed in transmission mode between 4400 and 400 cm-1. Numerous spectral window data were analyzed by principal component analysis and hierarchical clustering was performed. The second derivations of spectral ranges revealed clear grouping of T.mentagrophytes complex and T.rubrum complex in association over five separate spectral ranges. The findings also showed that while all of the T.mentagrophytes strains contained lipid compounds in their mold structure after Tween-80 incubation (pIR spectroscopy. This effect might be attributed to the possible transfer of lipid compounds from culture to cell

  14. In Site Analysis of a High Temperature Cure Reaction in Real Time Using Modulated Fiber-Optic FT-Raman Spectroscopy

    Science.gov (United States)

    Cooper, John; Aust, Jeffrey F.; Wise, Kent L.; Jensen, Brian J.

    1999-01-01

    The vibrational spectrum of a high temperature (330 C) polymerization reaction was successfully monitored in real time using a modulated fiber-optic FT-Raman spectrometer. A phenylethynyl terminated monomer was cured, and spectral evidence for two different reaction products was acquired. The products are a conjugated polyene chain and a cyclized trimer. This is the first report describing the use of FT-Raman spectroscopy to monitor a high temperature (greater than 250 C) reaction in real time.

  15. KARAKTERISASI SENYAWA POLIOKSOMETALAT TIPE KEGGIN TERSUBSTITUSI VANADIUM MENGGUNAKAN FT-IR DAN 51V NMR

    Directory of Open Access Journals (Sweden)

    Aldes Lesbani

    2012-05-01

    Full Text Available Sintesis dan karakterisasi senyawa polioksometalat tipe Keggin yakni Rb2K2[γ-SiV2W10O38(OH2]•nH2O dan H4[γ-SiV2W10O38(OH2]•nH2O telah dilakukan menggunakan FT-IR dan spektroskopi 51V NMR. Senyawa polioksometalat Rb2K2[γ-SiV2W10O38(OH2]•nH2O ditransformasi menjadi H4[γ-SiV2W10O38(OH2]•nH2O melalui metode pertukaran ion menggunakan asam klorida. Spektrum 51V NMR dari Rb2K2[γ-SiV2W10O38(OH2]•nH2O menunjukkan pergeseran kimia pada -586.94 ppm. Vibrasi utama yang menunjukkan gugus fungsional senyawa Rb2K2[γ-SiV2W10O38(OH2]•nH2O muncul pada bilangan gelombang 1041 cm-1, 972 cm-1 (n W=O, 914 cm-1 (n Si-O, 870 cm-1 (nW-Oe-W, 781 cm-1 (n W-Oc-W, 565 cm-1 dan 534 cm-1. Pergeseran kimia 51V NMR dari senyawa polioksometalat H4[γ-SiV2W10O38(OH2]•nH2O memberikan satu puncak pada -586.77 ppm. Pergeseran kimia antara senyawa Rb2K2[γ-SiV2W10O38(OH2]•nH2O dan H4[γ-SiV2W10O38(OH2]•nH2O tidak berubah yang disebabkan oleh kemiripan struktur utama di antara dua senyawa polioksometalat tersebut. Vibrasi utama dari senyawa polioksometalat H4[γ-SiV2W10O38(OH2]•nH2O juga mempunyai kemiripan dengan senyawa polioksometalat Rb2K2[γ-SiV2W10O38(OH2]•nH2O yang disebabkan hanya kation yang berubah menjadi asam.

  16. DIFERENCIACIÓN DE ESPECIE MICOBACTERIANA POR FT-IR (Espectroscopia Infrarroja con Transformada de Fourier

    Directory of Open Access Journals (Sweden)

    Arrubla Carlos Roberto

    2011-08-01

    Full Text Available

    Se trabajó con espectroscopía infrarroja transformada de Fourier (FT-IR para diferenciar diez especies de micobacterias. Mycobacterium intracelullare y M. fortuitum (ATCC, M.flavenscesM.  smegmatisM.  cheloneM.  gordonaeM.  trivialeM.  vaccaeM.  terrae y M.nonchromogenicum (IP. Como control de diferenciación de género se incluyó  Staphylococcus
    aureusStreptococcus viridans y Streptococcus pyogenesKlebsiella pneumoniae y Escherichia coli,
    cada especie se corrió por triplicado en KBr y ATR. Los espectros se analizaron según el método de diferenciación de componentes principales, y se realizaron derivadas de
    primer orden (D1 en modalidad de transmisión usando  la pastilla de KBr y  la base ATR, además se diseñó una biblioteca espectral con  la primera derivada de ATR. La
    sensibilidad de detección fue de 100% al trabajar con KBr y el nivel de diferenciación fue de 100% en tres de cuatro muestras problema.

  17. Hydration of human nails investigated by NIR-FT-Raman spectroscopy.

    Science.gov (United States)

    Wessel, S; Gniadecka, M; Jemec, G B; Wulf, H C

    1999-08-17

    The human nail, although it is usually stable against outer influences, becomes soft and flexible after soaking in water. Frequent washing increases brittleness of nails. Hydration of nails is thought to be the most important factor influencing the physical properties of nails and possibly acts through changes in keratin structure. Here NIR-FT-Raman has been used to examine molecular structural changes of intact moisten nails. Raman spectra were obtained both in vitro from nail samples and in vivo before and after soaking in water. The water uptake of normal nail samples during the first 15 min was reflected in the increasing intensity ratio of the nu(OH)/nu(CH(2)) bands. A saturating effect appeared soon after 10 min which is explained by a defined water holding capacity. R(nu) representation of the low frequency range of the Raman spectra showed that mainly bound water is found both in dry and in wet nails. This implies water-protein interaction. Protein backbone vibration at 932 cm(-1) indicating alpha-helical proteins increased in intensity in the wet nails. The nu(S-S) which is sensitive to changes in conformation of proteins showed a 4% higher intensity. Additional protein-water interactions could lead to a slight change of the dihedral angle of the C-S-S-C bonds and to geometric changes in coiling behavior of the alpha-helical protein. Suggesting a separation between matrix proteins and fiber proteins giving them a greater freedom of flexibility. The in vivo spectra detected from the distal part of the nail resembled spectra in vitro. Raman spectra of the proximal part of the nail showed that it was fully saturated with water. The proximal part of the nail did not show changes in water content and protein structure during nail moisturizing in the Raman spectra. Our results suggest that the softening of the nail following hydration may be due to changed matrix protein molecular structure induced by water.

  18. MAS NMR, DRIFT, and FT-Raman Characterization of SiO(2)-AlPO(4)-B(2)O(3) Ternary Catalytic Systems.

    Science.gov (United States)

    Aramendía; Boráu; Jiménez; Marinas; Ruiz; Urbano

    1999-09-01

    This work deals with the preparation of SiO(2)-AlPO(4)-B(2)O(3) ternary systems from impregation of a SiO(2)-AlPO(4) solid previously synthesized with B(OH)(3) (0-10% B(OH)(3), by weight). Characterization of the resulting solids has been carried out from adsorption-desorption isotherms of nitrogen, DRIFT, FT-Raman, pyridine adsorption, and (1)H, (11)B, (27)Al, and (31)P MAS NMR. The textural properties are scarcely changed by the impregnation and calcination steps. Moreover, the MAS NMR experiments indicated that the components of the solids do not interact among them. The solids were tested in the dehydration-dehydrogenation of propan-2-ol, widely used to correlate catalytic activity with the surface acid-base properties of the solids. The catalytic results indicate that the effect of boron dopping is an increase in the overall acidity of the solids. Copyright 1999 Academic Press.

  19. Determinação do teor de NR/SBR em misturas: associação de dados DTG e FT-IR Determination of NR/SBR content in blends: combining DTG and FT-IR data

    Directory of Open Access Journals (Sweden)

    Rita C. L. Dutra

    2004-12-01

    Full Text Available Misturas contendo teor conhecido de borracha natural (NR e copolímero de butadieno e estireno (SBR foram preparadas nos laboratórios do CTA e do IFOCA como amostras de referência para a elaboração de uma curva analítica, visando à determinação do teor de NR e SBR por análise pirólise/FT-IR. Termogravimetria foi usada para determinar o teor real de NR e SBR nas misturas por meio da razão entre as alturas dos picos da curva derivada (DTG. As bandas FT-IR escolhidas na região MIR foram 885 cm-1 (A1 para NR e 699 cm-1 (A2 para SBR. Os valores de absorvância relativa (A1/A2 versus a relação NR/SBR, obtida a partir dos dados fornecidos pela análise DTG, foram usados para construir uma curva com uma boa correlação linear (R=0,998, a qual possibilita determinar os teores de NR e SBR em misturas onde os componentes têm a mesma composição química.Blends with known contents of natural rubber (NR and butadiene-styrene copolymer (SBR were prepared at CTA and IFOCA laboratories as sample references for producing an analytical curve to determine the contents of NR and SBR via pyrolysis/FT-IR analysis. Thermogravimetry was used to quantify the real content of NR and SBR in the blends through the ratio between the intensity of the peaks in the derivative curve (DTG. The FT-IR analytical bands chosen at MIR region were 885 cm-1 (A1 for NR and 699 cm-1 (A2 for SBR. Values of relative absorbance (A1/A2 versus the NR/SBR contents data obtained from DTG analysis were used to construct an analytical curve with a good linear correlation (R=0.998 which allows one to determine contents of NR and SBR in blends of similar composition.

  20. Caracterização por FT-IR da superfície de borracha EPDM tratada via plasma por micro-ondas FT-IR characterization of EPDM rubber surface treated by microwave plasma

    Directory of Open Access Journals (Sweden)

    Renata P. dos Santos

    2012-01-01

    Full Text Available A superfície de uma borracha de etileno-propileno-dieno (EPDM vulcanizada foi modificada via plasma por microondas, com gases Ar, Ar/O2, N2/O2 e N2/H2, tendo como objetivo melhorar as propriedades adesivas da superfície. A técnica FT-IR/UATR foi escolhida para caracterizar as superfícies após tratamento, pois apresentou menor interferência dos ingredientes da formulação da EPDM, dentre as técnicas analisadas (ATR/KRS-5 e Ge. Grupos oxigenados foram inseridos na superfície da amostra tratada, mesmo quando não foi utilizado o oxigênio, pois estes grupos foram formados quando a superfície ativada foi exposta à atmosfera. Já em tratamentos contendo N2, grupos oxigenados e possíveis grupos nitrogenados foram identificados por FT-IR. Redução nos valores do ângulo de contato, aumento no trabalho de adesão e aumento no ensaio de resistência ao descascamento (EPDM × Poliuretano foram observados após tratamento com Ar e N2/H2, resultando em melhora nas propriedades adesivas da superfície tratada.The surface of a vulcanized ethylene propylene diene monomer (EPDM rubber was modified by microwave plasma in Ar, Ar/O2, N2/O2 and N2/H2 in order to improve the adhesion properties. Surface modification was characterized by FT-IR/UATR, because this technique showed smaller interference of ingredients of EPDM formulation in comparison with other techniques used (ATR KRS-5 and Ge. Oxygenated groups were introduced in the EPDM surface after treatment, even in treatments without oxygen. Theses groups were formed when the activated surface was exposed to the atmosphere. In treatments with nitrogen, oxygenated and possible nitrogenated groups were identified by FT-IR. Reduction in the contact angle, increase in the work of adhesion and increase in the peel strength (EPDM × Polyurethane were observed after treatment with Ar and N2/H2, resulting in improved adhesion properties of the modified surface.

  1. Avaliação do uso de técnicas PIR-G/FT-IR para caracterização de elastômeros Evaluation of PIR-G/FT-IR techniques for characterization of elastomers

    OpenAIRE

    Sanches,Natália B.; Milton F. Diniz; Tiago B. Reis; Silvana N. Cassu; Rita C. L. Dutra

    2006-01-01

    A técnica de pirólise gasosa, em bico de Bunsen, para análise por espectroscopia no infravermelho com transformada de Fourier (PIR-G/FT-IR) foi aplicada a diferentes borrachas, incluindo algumas misturas. Foi observado que é possível diferenciar os tipos de elastômeros por meio de análise de produtos gasosos de pirólise, inclusive aqueles que apresentam espectros IR de pirolisados líquidos similares, como é o caso de CIIR e BIIR, NR/SBR e EPDM/SBR, SBR/BR e SBR.Pyrolysis and infrared spectros...

  2. Caracterização por FT-IR da superfície de borracha EPDM tratada via plasma por micro-ondas FT-IR characterization of EPDM rubber surface treated by microwave plasma

    Directory of Open Access Journals (Sweden)

    Renata P. dos Santos

    2012-01-01

    Full Text Available A superfície de uma borracha de etileno-propileno-dieno (EPDM vulcanizada foi modificada via plasma por microondas, com gases Ar, Ar/O2, N2/O2 e N2/H2, tendo como objetivo melhorar as propriedades adesivas da superfície. A técnica FT-IR/UATR foi escolhida para caracterizar as superfícies após tratamento, pois apresentou menor interferência dos ingredientes da formulação da EPDM, dentre as técnicas analisadas (ATR/KRS-5 e Ge. Grupos oxigenados foram inseridos na superfície da amostra tratada, mesmo quando não foi utilizado o oxigênio, pois estes grupos foram formados quando a superfície ativada foi exposta à atmosfera. Já em tratamentos contendo N2, grupos oxigenados e possíveis grupos nitrogenados foram identificados por FT-IR. Redução nos valores do ângulo de contato, aumento no trabalho de adesão e aumento no ensaio de resistência ao descascamento (EPDM × Poliuretano foram observados após tratamento com Ar e N2/H2, resultando em melhora nas propriedades adesivas da superfície tratada.The surface of a vulcanized ethylene propylene diene monomer (EPDM rubber was modified by microwave plasma in Ar, Ar/O2, N2/O2 and N2/H2 in order to improve the adhesion properties. Surface modification was characterized by FT-IR/UATR, because this technique showed smaller interference of ingredients of EPDM formulation in comparison with other techniques used (ATR KRS-5 and Ge. Oxygenated groups were introduced in the EPDM surface after treatment, even in treatments without oxygen. Theses groups were formed when the activated surface was exposed to the atmosphere. In treatments with nitrogen, oxygenated and possible nitrogenated groups were identified by FT-IR. Reduction in the contact angle, increase in the work of adhesion and increase in the peel strength (EPDM × Polyurethane were observed after treatment with Ar and N2/H2, resulting in improved adhesion properties of the modified surface.

  3. FT-IR spectroscopy: A powerful tool for studying the inter- and intraspecific biodiversity of cultivable non-Saccharomyces yeasts isolated from grape must.

    Science.gov (United States)

    Grangeteau, Cédric; Gerhards, Daniel; Terrat, Sebastien; Dequiedt, Samuel; Alexandre, Hervé; Guilloux-Benatier, Michèle; von Wallbrunn, Christian; Rousseaux, Sandrine

    2016-02-01

    The efficiency of the FT-IR technique for studying the inter- and intra biodiversity of cultivable non-Saccharomyces yeasts (NS) present in different must samples was examined. In first, the capacity of the technique FT-IR to study the global diversity of a given sample was compared to the pyrosequencing method, used as a reference technique. Seven different genera (Aureobasidium, Candida, Cryptococcus, Hanseniaspora, Issatchenkia, Metschnikowia and Pichia) were identified by FT-IR and also by pyrosequencing. Thirty-eight other genera were identified by pyrosequencing, but together they represented less than 6% of the average total population of 6 musts. Among the species identified, some of them present organoleptic potentials in winemaking, particularly Starmerella bacillaris (synonym Candidazemplinina). So in a second time, we evaluated the capacity of the FT-IR technique to discriminate the isolates of this species because few techniques were able to study intraspecific NS yeast biodiversity. The results obtained were validated by using a classic method as ITS sequencing. Biodiversity at strain level was high: 19 different strains were identified from 58 isolates. So, FT-IR spectroscopy seems to be an accurate and reliable method for identifying major genera present in the musts. The two biggest advantages of the FT-IR are the capacity to characterize intraspecific biodiversity of non-Saccharomyces yeasts and the possibility to discriminate a lot of strains.

  4. FT-Raman spectroscopy for the differentiation between cutaneous melanoma and pigmented nevus Espectroscopia FT-Raman na diferenciação entre melanoma cutâneo e nevo pigmentado

    Directory of Open Access Journals (Sweden)

    Sidney Bandeira Cartaxo

    2010-08-01

    Full Text Available Cutaneous melanoma is the most aggressive type of skin cancer and Ft-Raman spectroscopy has been studied as a potential method that could be a real alternative for early diagnosis of neoplasms. PURPOSE: To qualify the spectral FT-Raman data, in order to differentiate cutaneous melanoma and pigmented nevus. METHODS: For this study, 10 samples of cutaneous melanoma, 9 samples of pigmented nevi, and 10 samples of normal skin were obtained by incisional biopsies performed during plastic surgeries ex vivo, immediately after removing the surgical sample. RESULTS: The FT-Raman spectra of each group presented a high correlation between the elements of the same group, thus favoring the elaboration of spectral averages. When analyzing the spectral standard of each group, the normal skin standard did not show a significant variation between the spectra; the standard of the pigmented nevi group showed significant variation, and the cutaneous melanoma group also showed variation. Through univariate analysis, specific bands were detected for each vibrational mode identified. The discriminatory analysis of the data showed a 75.3% efficiency of the differentiation between the three groups studied. CONCLUSION: The vibrational modes Polysaccharides, Tyrosine and Amide-I differentiated the melanoma from the pigmented nevus.O melanoma cutâneo é o câncer de pele mais agressivo, e a espectroscopia FT-Raman tem sido estudada como um método em potencial que pode ser uma verdadeira alternativa no diagnóstico precoce de neoplasias. OBJETIVO: Qualificar os dados espectrais FT-Raman de modo a diferenciar melanoma cutâneo de nevo pigmentado. MÉTODOS: Foram utilizadas 10 amostras de melanoma cutâneo, obtidas por meio de biopsias incisionais realizadas "ex-vivo"; nove amostras de nevo pigmentado e 10 amostras de pele normal foram coletadas durante cirurgias plásticas. RESULTADOS: Os espectros FT-Raman de cada grupo diagnóstico apresentaram alta correlação entre os

  5. FT-IR, micro-Raman and UV-vis spectroscopic and quantum chemical calculation studies on the 6-chloro-4-hydroxy-3-phenyl pyridazine compound

    Science.gov (United States)

    Sarıkaya, Ebru Karakaş; Bahçeli, Semiha; Varkal, Döndü; Dereli, Ömer

    2017-08-01

    In this work, the study of the6-chloro-4-hydroxy-3-phenyl pyridazine compound, (C10 H7 N2 O Cl with synonym 4-pyridazinol, 6-chloro-3-phenyl-), was verified experimentally by using the Fourier Transformed Infrared (FT-IR), micro-Raman and UV/vis (in N,N-dimethylformamide solvent) spectroscopies. Furthermore, the optimized molecular geometry, conformatinal analysis, vibrational frequencies, the simulated UV/vis spectra (in gas and in N,N-dimethylformamide solvent), 1H and 13C NMR chemical shift (in gas, in chloroform and N,N-dimethylformamide in solvents) values, HOMO-LUMO analysis, the molecular electrostatic potential (MEP) surface and thermodynamic parameters ofthe6-chloro-4-hydroxy-3-phenyl pyridazine compound were calculated by using DFT/B3LYP method with 6-311++G(d,p) basis set in ground state. The comparison of the calculated and vibrational frequencies with the experimental values provides important information about the title compound.

  6. Characterization of large amyloid fibers and tapes with Fourier transform infrared (FT-IR) and Raman spectroscopy.

    Science.gov (United States)

    Ridgley, Devin M; Claunch, Elizabeth C; Barone, Justin R

    2013-12-01

    Amyloids are self-assembled protein structures implicated in a host of neurodegenerative diseases. Organisms can also produce "functional amyloids" to perpetuate life, and these materials serve as models for robust biomaterials. Amyloids are typically studied using fluorescent dyes, Fourier transform infrared (FT-IR), or Raman spectroscopy analysis of the protein amide I region, and X-ray diffraction (XRD) because the self-assembled β-sheet secondary structure of the amyloid can be easily identified with these techniques. Here, FT-IR and Raman spectroscopy analyses are described to characterize amyloid structures beyond just identification of the β-sheet structure. It has been shown that peptide mixtures can self-assemble into nanometer-sized amyloid structures that then continue to self-assemble to the micrometer scale. The resulting structures are flat tapes of low rigidity or cylinders of high rigidity depending on the peptides in the mixture. By monitoring the aggregation of peptides in solution using FT-IR spectroscopy, it is possible to identify specific amino acids implicated in β-sheet formation and higher order self-assembly. It is also possible to predict the final tape or cylinder morphology and gain insight into the structure's physical properties based on observed intermolecular interactions during the self-assembly process. Tapes and cylinders are shown to both have a similar core self-assembled β-sheet structure. Soft tapes also have weak hydrophobic interactions between alanine, isoleucine, leucine, and valine that facilitate self-assembly. Rigid cylinders have similar hydrophobic interactions that facilitate self-assembly and also have extensive hydrogen bonding between glutamines. Raman spectroscopy performed on the dried tapes and fibers shows the persistence of these interactions. The spectroscopic analyses described could be generalized to other self-assembling amyloid systems to explain property and morphological differences.

  7. The Assesment of the Decayed Lime Wood Polymeric Components by TG and FT-IR Parameters Correlation

    Directory of Open Access Journals (Sweden)

    Paula BUGHEANU

    2010-12-01

    Full Text Available The restoration and conservation practices of wooden artifacts increasingly need more nondestructive, inexpensive and no-time consuming diagnosis methods. A number of twelve samples of lime wood in various states of degradation from furniture and panel painting were investigated by thermal analysis and infrared spectroscopy. The present work was undertaken to quantify the degree of complementarity of the TG and FT-IR methods by assessing >the ration between cellulose, hemicelluloses and lignin of the decayed lime wood by the correlation of the parameters RTG = ΔmHC /ΔmL from TGA data, and R1FTIR = Aab1370/Aab1505, R2FTIR = Abz1370/Abz1505, R3 FTIR = Iab1370/Iab1505, R4FTIR = Ibz1370/Ibz1505 , from the corresponding peaks of cellulose and hemicelluloses at ~ 1370 cm-1 and of lignin at 1505 cm-1 in FT-IR spectra, where RTG is the ratio between the mass loss of cellulose & hemicelluloses ΔmHC and the mass loss of lignin ΔmL; R1FTIR, R2FTIR, are the ratio between the absolute peaks area Aab1370/Aab1505, and the normalized peaks area Abz1370/Abz1505, respectively, while R3FTIR, R4FTIR are the ratio between the absolute peaks intensity Iab1370/Iab1505, and the normalized peaks intensity Ibz1370/Ibz1505, respectively. We found that the TG parameter decreases in the same order as FT-IR parameters R1 FTIR, R2FTIR, R3FTIR, R4FTIR, and relates well in the values with R1FTIR.

  8. Monitoring biochemical changes in bacterial spore during thermal and pressure-assisted thermal processing using FT-IR spectroscopy.

    Science.gov (United States)

    Subramanian, Anand; Ahn, Juhee; Balasubramaniam, V M; Rodriguez-Saona, Luis

    2007-10-31

    Pressure-assisted thermal processing (PATP) is being widely investigated for processing low acid foods. However, its microbial safety has not been well established and the mechanism of inactivation of pathogens and spores is not well understood. Fourier transform infrared (FT-IR) spectroscopy was used to study some of the biochemical changes in bacterial spores occurring during PATP and thermal processing (TP). Spore suspensions (approximately 10(9) CFU/mL of water) of Clostridium tyrobutyricum, Bacillus sphaericus, and three strains of Bacillus amyloliquefaciens were treated by PATP (121 degrees C and 700 MPa) for 0, 10, 20, and 30 s and TP (121 degrees C) for 0, 10, 20, and 30 s. Treated and untreated spore suspensions were analyzed using FT-IR in the mid-infrared region (4000-800 cm(-1)). Multivariate classification models based on soft independent modeling of class analogy (SIMCA) were developed using second derivative-transformed spectra. The spores could be differentiated up to the strain level due to differences in their biochemical composition, especially dipicolinic acid (DPA) and secondary structure of proteins. During PATP changes in alpha-helix and beta-sheets of secondary protein were evident in the spectral regions 1655 and 1626 cm(-1), respectively. Infrared absorption bands from DPA (1281, 1378, 1440, and 1568 cm(-1)) decreased significantly during the initial stages of PATP, indicating release of DPA. During TP changes were evident in the bands associated with secondary proteins. DPA bands showed little or no change during TP. A correlation was found between the spore's Ca-DPA content and its resistance to PATP. FT-IR spectroscopy could classify different strains of bacterial spores and determine some of the changes occurring during spore inactivation by PATP and TP. Furthermore, this technique shows great promise for rapid screening PATP-resistant bacterial spores.

  9. Differential diagnosis in primary and metastatic cutaneous melanoma by FT-Raman spectroscopy Diagnóstico diferencial no melanoma primário e metastático por espectroscopia FT-Raman

    Directory of Open Access Journals (Sweden)

    Andrea Fernandes de Oliveira

    2010-10-01

    Full Text Available PURPOSE: To qualify the FT-Raman spectral data of primary and metastatic cutaneous melanoma in order to obtain a differential diagnosis. METHODS: Ten normal human skin samples without any clinical or histopathological alterations, ten cutaneous melanoma fragments, and nine lymph node metastasis samples were used; 105, 140 and 126 spectra were obtained respectively. Each sample was divided into 2 or 3 fragments of approximately 2 mm³ and positioned in the Raman spectrometer sample holder in order to obtain the spectra; a monochrome laser light Nd:YAG at 1064 nm was used to excite the inelastic effect. RESULTS: To differentiate the three histopathological groups according to their characteristics extracted from the spectra, data discriminative analysis was undertaken. Phenylalanine, DNA, and Amide-I spectral variables stood out in the differentiation of the three groups. The percentages of correctly classified groups based on Phenylalanine, DNA, and Amide-I spectral features was 93.1%. CONCLUSION: FT-Raman spectroscopy is capable of differentiating melanoma from its metastasis, as well as from normal skin.OBJETIVO: Qualificar os dados espectrais FT-Raman do melanoma cutâneo primário e metastático e assim realizar o diagnóstico diferencial. MÉTODOS: Foram utilizadas amostras de 10 fragmentos de pele sem alterações clínicas ou histopatológicas, 10 de melanomas cutâneos e 9 de metástases linfonodais; 105, 140 and 126 espectros foram obtidos respectivamente. Cada amostra foi dividida em 2 ou 3 frações de 2 mm³ e posicionada no porta amostras do espectrômetro Raman para obtenção dos espectros, por meio da excitação do espalhamento inelástico pelo laser de Nd:YAG em 1064 nm incididos na amostra. RESULTADOS: Para diferenciar os três grupos formados de acordo com as características fornecidas pelos espectros, realizamos a análise discriminante dos dados. As variáveis espectrais Fenilalanina, DNA e Amida-I se destacaram na

  10. ATR-FT-IR spectral collection of conservation materials in the extended region of 4000-80 cm⁻¹.

    Science.gov (United States)

    Vahur, Signe; Teearu, Anu; Peets, Pilleriin; Joosu, Lauri; Leito, Ivo

    2016-05-01

    In this paper, a spectral collection of over 150 ATR-FT-IR spectra of materials related to cultural heritage and conservation science has been presented that have been measured in the extended region of 4000-80 cm(-1) (mid-IR and far-IR region). The applicability of the spectra and, in particular, the extended spectral range, for investigation of art-related materials is demonstrated on a case study. This collection of ATRFT-IR reference spectra is freely available online (http://tera.chem.ut.ee/IR_spectra/) and is meant to be a useful tool for researchers in the field of conservation and materials science.

  11. Comparison of Genetic Parameters Estimation of Fatty Acids from Gas Chromatography and FT-IR in Holsteins

    DEFF Research Database (Denmark)

    Poulsen, Nina Aagaard; Eskildsen, C E A; Skov, Thomas;

    Fourier transform infrared (FT-IR) is routinely used in the milk recording system and IR-based solutions are therefore attractive to ensure the full potential of genomic selection data in future breeding programs. Today, IR-based models can be used to predict a wide range of milk traits......, and their genetic parameters. However, IR-predicted phenotypes for detailed milk composition are often based on their correlation to other traits in a given data set rather than on direct predictions. Here, genetic parameters for individual milk fatty acids were estimated based on either IR-predicted phenotypes...

  12. High-pressure FT IR measurements of crystalline methylene chloride up to 120 kbar in the diamond anvil cell

    Science.gov (United States)

    Shimizu, H.; Xu, J.; Mao, H. K.; Bell, P. M.

    1984-03-01

    The FT IR spectra of pressure-induced crystalline CH 2Cl 2 at room temperature were measured at hydrostatic pressures up to 120 kbar in the diamond anvil cell. The pressure dependences of the internal modes (ν 3, ν 9, ν 8, and ν 2) are reported and compared with the result of Raman scattering measurements. The discontinuity of the slope (dν/d P) at ≈ 45 kbar for the ν 9 antisymmetric CCl streching mode indicates the pressure-induced second-order phase transition which seems to be triggered by the interaction between the ν 9 mode and the ν 3 symmetric CCl stretching mode.

  13. Retrieving CO concentrations from FT-IR spectra with nonmodeled interferences and fluctuating baselines using PCR model parameters

    DEFF Research Database (Denmark)

    Bak, J.

    2001-01-01

    are subtracted one by one from the contaminated spectrum, and the length of the spectral contour within specified wavenumbers is then calculated. When the length of the contour is at a minimum, a condition is reached where the pure component part of the measured spectrum is absent and only the background signal......-factor PCR models based on pure gaseous 1 and 4 cm(-1) CO Fourier transform infrared (FT-IR) spectra (50-400 ppm) measured at ambient temperatures. The program is validated with measured CO spectra containing interferents such as N2O, CO2, and added Hitran-simulated H2O, CO2, and COS spectra, representing...

  14. FT-IR reflection spectra of single crystals: resolving phonons of different symmetry without using polarised radiation

    OpenAIRE

    METODIJA NAJDOSKI; VLADIMIR IVANOVSKI; VLADIMIR M. PETRUSEVSKI

    2000-01-01

    Fourier-transform infrared (FT-IR) reflection spectra, asquired at nearnormal incidence, were recorded from single crystals belonging to six crystal systems: CsCr(SO4)2.12H2O (alum, cubic), K2CuCl2·2H2O (Mitscherlichite, tetragonal), CaCO3 (calcite, hexagonal), KHSO4 (mercallite, orthorhombic), CaSO4·2H2O (gypsum, monoclinic) and CuSO4·5H2O (chalcantite, triclinic). The acquired IR reflection spectra were further transformed into absorption spectra, employing the Kramers-Kronig transformation...

  15. The use of FT-IR as a screening technique for organic residue analysis of archaeological samples

    Science.gov (United States)

    Shillito, Lisa M.; Almond, Matthew J.; Wicks, Karen; Marshall, Lisa-Jane R.; Matthews, Wendy

    2009-02-01

    A range of archaeological samples have been examined using FT-IR spectroscopy. These include suspected coprolite samples from the Neolithic site of Çatalhöyük in Turkey, pottery samples from the Roman site of Silchester, UK and the Bronze Age site of Gatas, Spain and unidentified black residues on pottery sherds from the Roman sites of Springhead and Cambourne, UK. For coprolite samples the aim of FT-IR analysis is identification. Identification of coprolites in the field is based on their distinct orange colour; however, such visual identifications can often be misleading due to their similarity with deposits such as ochre and clay. For pottery the aim is to screen those samples that might contain high levels of organic residues which would be suitable for GC-MS analysis. The experiments have shown coprolites to have distinctive spectra, containing strong peaks from calcite, phosphate and quartz; the presence of phosphorus may be confirmed by SEM-EDX analysis. Pottery containing organic residues of plant and animal origin has also been shown to generally display strong phosphate peaks. FT-IR has distinguished between organic resin and non-organic compositions for the black residues, with differences also being seen between organic samples that have the same physical appearance. Further analysis by GC-MS has confirmed the identification of the coprolites through the presence of coprostanol and bile acids, and shows that the majority of organic pottery residues are either fatty acids or mono- or di-acylglycerols from foodstuffs, or triterpenoid resin compounds exposed to high temperatures. One suspected resin sample was shown to contain no organic residues, and it is seen that resin samples with similar physical appearances have different chemical compositions. FT-IR is proposed as a quick and cheap method of screening archaeological samples before subjecting them to the more expensive and time-consuming method of GC-MS. This will eliminate inorganic samples such

  16. Rapid discrimination of extracts of Chinese propolis and poplar buds by FT-IR and 2D IR correlation spectroscopy

    Science.gov (United States)

    Wu, Yan-Wen; Sun, Su-Qin; Zhao, Jing; Li, Yi; Zhou, Qun

    2008-07-01

    The extract of Chinese propolis (ECP) has recently been adulterated with that of poplar buds (EPB), because most of ECP is derived from the poplar plant, and ECP and EPB have almost identical chemical compositions. It is very difficult to differentiate them by using the chromatographic methods such as high performance liquid chromatography (HPLC) and gas chromatography (GC). Therefore, how to effectively discriminate these two mixtures is a problem to be solved urgently. In this paper, a rapid method for discriminating ECP and EPB was established by the Fourier transform infrared (FT-IR) spectra combined with the two-dimensional infrared correlation (2D IR) analysis. Forty-three ECP and five EPB samples collected from different areas of China were analyzed by the FT-IR spectroscopy. All the ECP and EPB samples tested show similar IR spectral profiles. The significant differences between ECP and EPB appear in the region of 3000-2800 cm -1 of the spectra. Based on such differences, the two species were successfully classified with the soft independent modeling of class analogy (SIMCA) pattern recognition technique. Furthermore, these differences were well validated by a series of temperature-dependent dynamic FT-IR spectra and the corresponding 2D IR plots. The results indicate that the differences in these two natural products are caused by the amounts of long-chain alkyl compounds (including long-chain alkanes, long-chain alkyl esters and long chain alkyl alcohols) in them, rather than the flavonoid compounds, generally recognized as the bioactive substances of propolis. There are much more long-chain alkyl compounds in ECP than those in EPB, and the carbon atoms of the compounds in ECP remain in an order Z-shaped array, but those in EPB are disorder. It suggests that FT-IR and 2D IR spectroscopy can provide a valuable method for the rapid differentiation of similar natural products, ECP and EPB. The IR spectra could directly reflect the integrated chemical

  17. Avaliação do uso de técnicas PIR-G/FT-IR para caracterização de elastômeros Evaluation of PIR-G/FT-IR techniques for characterization of elastomers

    Directory of Open Access Journals (Sweden)

    Natália B. Sanches

    2006-01-01

    Full Text Available A técnica de pirólise gasosa, em bico de Bunsen, para análise por espectroscopia no infravermelho com transformada de Fourier (PIR-G/FT-IR foi aplicada a diferentes borrachas, incluindo algumas misturas. Foi observado que é possível diferenciar os tipos de elastômeros por meio de análise de produtos gasosos de pirólise, inclusive aqueles que apresentam espectros IR de pirolisados líquidos similares, como é o caso de CIIR e BIIR, NR/SBR e EPDM/SBR, SBR/BR e SBR.Pyrolysis and infrared spectroscopy (PIR-G/FT-IR were used for investigating gaseous products of rubber. The results show that this method was suitable to identify different elastomers and elastomer blends, including rubbers that present similar IR spectra of pyrolysed liquid products such as CIIR and BIIR, NR/SBR and EPDM/SBR, SBR/BR and SBR.

  18. Synthesis, X-ray, NMR, FT-IR, UV/vis, DFT and TD-DFT studies of N-(4-chlorobutanoyl)-N'-(2-, 3- and 4-methylphenyl)thiourea derivatives.

    Science.gov (United States)

    Abosadiya, Hamza M; Anouar, El Hassane; Hasbullah, Siti Aishah; Yamin, Bohari M

    2015-06-05

    A new isomers of thiourea derivatives, namely N-(4-chlorobutanoyl)-N'-(2-methylphenyl)-thiourea (1a), N-(4-chlorobutanoyl)-N'-(3-methylphenyl)thiourea (1b) and N-(4-chlorobutanoyl)-N'-(4-methylphenyl)thiourea (1c) have been synthesized by refluxing mixture of equimolar amounts of 4-chlorobutanoylisothiocyanate with 2, 3 or 4-toluidine, respectively. The three isomers were characterized by spectroscopic (UV/vis, FT-IR and NMR) and X-ray crystallography techniques. To investigate the isomerization effect on spectroscopic data, DFT and TD-DFT calculations have been carried out using five hybrid functionals (B3LYP, B3P86, CAM-B3LYP, M06-2X and PBE0) to predict UV/vis absorption bands (n→π∗ and π→π∗), (1)H and (13)C NMR chemical shifts, FT-IR vibration modes and X-ray parameters (bonds, bond angles and torsion angles) for 1a, 1b and 1c isomers. The results showed that the isomerization effect is significant on λ(MAX) absorption bands, while for IR and NMR the effect is negligible. In accordance with previous studies, B3LYP, B3P86 and PBE0 gave the most reliable to predict the excitation energies of thiourea derivatives.

  19. FT-Raman study of quinine aqueous solutions with varying pH: 2D correlation study

    Science.gov (United States)

    Wesełucha-Birczyńska, Aleksandra

    2007-01-01

    Quinine (C 20H 24N 2O 2) is one of the best known, for its antimalarial activity, Cinchona alkaloid. In the current study 2D correlation method was applied to analyze FT-Raman spectra of quinine aqueous solutions with varying pH, which was regarded as an external perturbation. Protonation appears to be the main cause leading to the emergence of cross peaks in the synchronous and asynchronous correlation maps. One should know that protonation process is an important step associated with quinine antimalarial activity. Methoxy group manifests its presence by creation of the respective correlation peaks and seems to be significant for quinine mode of action.

  20. Monomer conversion of composite dental resins photoactivated by a halogen lamp and a LED: a FT-Raman spectroscopy study

    Directory of Open Access Journals (Sweden)

    Luís Eduardo Silva Soares

    2005-03-01

    Full Text Available Eighteen circular blocks of resins cured either by a LED or a halogen lamp (20, 40 and 60 s, had their top (T and bottom (B surfaces studied using a FT-Raman spectrometer. Systematic changes in the intensity of the methacrylate C=C stretching mode at 1638 cm-1 as a function of exposure duration were observed. The calculated degree of conversion (DC ranged from 45.0% (B to 52.0% (T and from 49.0% (B to 55.0% (T for the LED and halogen lamp, respectively. LED and halogen light produced similar DC values with 40 and 60 s of irradiation.

  1. Quality control of Harpagophytum procumbens and its related phytopharmaceutical products by means of NIR-FT-Raman spectroscopy.

    Science.gov (United States)

    Baranska, M; Schulz, H; Siuda, R; Strehle, M A; Rösch, P; Popp, J; Joubert, E; Manley, M

    2005-01-01

    NIR-FT-Raman spectroscopy was used for identification and quantification of harpagoside in secondary roots of Harpagophytum procumbens as well as in related phytopharmaceutical products, e.g., ethanolic extracts and tablets. Applied Raman mappings reveal the spatial distribution of this valuable iridoid glycoside within the different samples. The same technique can be used for quality control purposes beginning from the plant to its final products. Based on the obtained spectral data and reference HPLC values of harpagoside, a reliable multivariate calibration model was developed.

  2. Application of FT-Raman spectroscopy for in situ detection of microorganisms on the surface of textiles.

    Science.gov (United States)

    Rygula, Anna; Jekiel, Katarzyna; Szostak-Kot, Jadwiga; Wrobel, Tomasz P; Baranska, Malgorzata

    2011-11-01

    In this work we present the usefulness of FT-Raman spectroscopy for microbiological analysis of textiles. This technique was used for non-destructive identification of Escherichia coli bacteria on cotton and polyester fabrics. It was possible to discriminate between infected and non-infected materials. Moreover, this technique allowed detection of detergent traces as well as investigation of the influence of microorganisms on different textiles. Raman analysis supported by chemometrics (cluster analysis and principal component analysis) was shown to be a method for identification of textiles with inoculum of microorganisms in a short time. The results can be potentially used in the fabric industry and related areas.

  3. Molecular conformational analysis, reactivity, vibrational spectral analysis and molecular dynamics and docking studies of 6-chloro-5-isopropylpyrimidine-2,4(1H,3H)-dione, a potential precursor to bioactive agent

    Science.gov (United States)

    Al-Omary, Fatmah A. M.; Mary, Y. Sheena; Beegum, Shargina; Panicker, C. Yohannan; Al-Shehri, Mona M.; El-Emam, Ali A.; Armaković, Stevan; Armaković, Sanja J.; Van Alsenoy, C.

    2017-01-01

    FT-IR and FT-Raman spectra of 6-chloro-5-isopropylpyrimidine-2,4(1H,3H)-dione were recorded and analyzed. The vibrational wavenumbers were computed using DFT quantum chemical calculations and the data obtained from wavenumber calculations are used to assign the experimentally obtained bands. Potential energy distribution was done using GAR2PED software. The geometrical parameters of the title compound are in agreement with the XRD results. NBO analysis, frontier molecular orbital and first and second hyperpolarizability and molecular electrostatic potential results are also reported. The possible electrophile attacking sites of the title compound is identified using MEP surface plot study. Molecule sites prone to electrophilic attacks were identified using average local ionization energy surfaces, while further insight into the local reactivity properties of the title molecule has been gained by calculation of Fukui functions. Intra-molecular non-covalent interactions have been detected and visualized. Degradation properties based on autoxidation and hydrolysis have been investigated by calculation of bond dissociation energies and radial distribution functions, respectively. From the molecular docking study, the ligand binds at the active site of the substrate by weak non-covalent interactions and amino acids Leu89 forms alkyl interaction with the CH3 groups and Glu90 amino acid forms π-anion interaction with the pyrimidine ring and Thr369 and Ser366 amino acids form H-bond interaction with the Cdbnd O and NH group, respectively. From the conformational analysis, the calculated structures show that the C6C9C10 angle in the most stable form is about 8° smaller compared to the C8C9C10 angle, indicating a higher repulsive force between the (CH3)2HC- moiety and the chlorine atom due to the size of chlorine compared to oxygen atoms.

  4. Structural investigations on some cadmium-borotellurate glasses using ultrasonic, FT-IR and X-ray techniques

    Energy Technology Data Exchange (ETDEWEB)

    Gaafar, M.S., E-mail: m.gaafar@mu.edu.sa [Physics Department, College of Sciences, Majmaah University (Saudi Arabia); Ultrasonic Laboratory, National Institute for Standards, Tersa Str., P.O. Box 136, El-Haram, El-Giza 12211 (Egypt); Shaarany, I. [Physics Department, College of Sciences, Majmaah University (Saudi Arabia); Physics Department, Faculty of Science, Suez Canal University, Ismailia (Egypt); Alharbi, T. [Physics Department, College of Sciences, Majmaah University (Saudi Arabia)

    2014-12-15

    Highlights: • 50B{sub 2}O{sub 3}–(50 – x)TeO{sub 2}–xCdO glass system has been prepared by melt quenching technique. • Both sound velocities decrease with increase in x. • Studies on the structure of these glasses, have revealed that Cd{sup 2+} ions are incorporated in the form of CdO{sub 6}. - Abstract: Glasses in the system 50B{sub 2}O{sub 3}–(50 − x)TeO{sub 2}–xCdO with different CdO contents (0, 10, 20, 30, 40 and 50 mol%), have been prepared by melt quenching technique. Elastic properties, X-ray and FT-IR spectroscopic studies have been employed to study the role of CdO on the structure of the investigated glass system. Elastic properties and Debye temperature have been investigated using sound wave velocity measurements at 4 MHz at room temperature. The results showed that the density increase and the molar volume decrease while both sound velocities decrease with increase in x. Elastic properties, FT-IR and X-ray diffraction studies on the network structure of these glass structures, have revealed that Cd{sup 2+} ions are incorporated in the form of CdO{sub 6}, decreasing the molar volume and compensate for the decrease in the average coordination number of tellurium atoms which was the reason for the increase in elastic moduli.

  5. FT-IR and Micro-Raman spectroscopic studies of archaeological potteries recently excavated in Poompuhar, Tamilnadu, India

    Science.gov (United States)

    Kiruba, S.; Ganesan, S.

    2015-06-01

    Ancient ceramics are the abundant artifacts that give the knowledge of the past societies. Therefore it is of great importance to acquire knowledge about the chemical composition of the clay in archaeological artifacts. The spectroscopic techniques represent one of the most powerful tools to investigate the structure of all the materials and chemical composition of the cultural object like potteries. An attempt has been made in the present work to estimate the firing temperature of the archaeological pottery shreds excavated from the archaeological site Poompuhar in the state of Tamilnadu in India. The firing temperature of the archaeological pottery shreds were estimated by recording the corresponding FT-IR spectra in the range 4000-450 cm-1 and Micro Raman spectra in the range 1800-400 cm-1. The clay mineral present in the pottery samples are identified through FT-IR method and was confirmed with Micro Raman spectroscopy as both are complement to each other. The major primary mineral present in the samples is Kaolinite and the secondary mineral present is quartz and the accessory minerals present in the samples are hematite, magnetite and feldspar. The results of Raman spectra showed that the potters of this site used a mixture of clays as raw materials. The firing temperature for some of the samples did not exceed 800 °C which suggests the use of open fire.

  6. FT-IR evaluation of SmFeAsO1-xFx (x = 0, 0.069)

    Science.gov (United States)

    Shinohara, Hajime; Kamihara, Yoichi

    2012-02-01

    Optical properties of superconducting SmFeAsO1-xFx (x=0, 0.069) were demonstrated by reflection measurement with FT- IR method. Polycrystalline SmFeAsO1-xFx samples were synthesized using two-step solid state reaction described elsewhere [New J. Phys.12, 033005 (2010)]. Purity of samples was checked by X-ray diffraction patterns using Cu K- alpha radiation. The reflection measurement was performed at the range from 9000 cm-1 to 18000 cm-1 that was corresponded to an energy region from 1.12 eV to 2.25 eV. A photoconductivity of SmFeAsO1-xFx was determined by Kramer-Kroning (KK) relation. Reflectivity and photoconductivity measurements, as well as by FT-IR, at various areas were performed to define an energy level of materials [EPL, 84 67013 (2008), and J. Phys. Soc. Jpn. 80 013707 (2011)]. Obtained photoconductivity and reflection spectra were similar to those of LaFeAsO1-xFx that was a basic compound of LnFeAsO1-xFx (Ln=La, Ce, Sm), reported by Z. G. Chen et al [Phys. Rev. B 81, 100502 (2010)]. Our result suggests that the energy band structure of SmFeAsO was affected by F-doping even in visible area. Details and temperature dependence of the reflection and photoconductivity spectra will be presented at the conference.

  7. Sensing the structural differences in cellulose from apple and bacterial cell wall materials by Raman and FT-IR spectroscopy.

    Science.gov (United States)

    Szymańska-Chargot, Monika; Cybulska, Justyna; Zdunek, Artur

    2011-01-01

    Raman and Fourier Transform Infrared (FT-IR) spectroscopy was used for assessment of structural differences of celluloses of various origins. Investigated celluloses were: bacterial celluloses cultured in presence of pectin and/or xyloglucan, as well as commercial celluloses and cellulose extracted from apple parenchyma. FT-IR spectra were used to estimate of the I(β) content, whereas Raman spectra were used to evaluate the degree of crystallinity of the cellulose. The crystallinity index (X(C)(RAMAN)%) varied from -25% for apple cellulose to 53% for microcrystalline commercial cellulose. Considering bacterial cellulose, addition of xyloglucan has an impact on the percentage content of cellulose I(β). However, addition of only xyloglucan or only pectins to pure bacterial cellulose both resulted in a slight decrease of crystallinity. However, culturing bacterial cellulose in the presence of mixtures of xyloglucan and pectins results in an increase of crystallinity. The results confirmed that the higher degree of crystallinity, the broader the peak around 913 cm(-1). Among all bacterial celluloses the bacterial cellulose cultured in presence of xyloglucan and pectin (BCPX) has the most similar structure to those observed in natural primary cell walls.

  8. Accelerated Aging of BKC 44306-10 Rigid Polyurethane Foam: FT-IR Spectroscopy, Dimensional Analysis, and Micro Computed Tomography

    Energy Technology Data Exchange (ETDEWEB)

    Gilbertson, Robert D. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Patterson, Brian M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Smith, Zachary [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2014-01-02

    An accelerated aging study of BKC 44306-10 rigid polyurethane foam was carried out. Foam samples were aged in a nitrogen atmosphere at three different temperatures: 50 °C, 65 °C, and 80 °C. Foam samples were periodically removed from the aging canisters at 1, 3, 6, 9, 12, and 15 month intervals when FT-IR spectroscopy, dimensional analysis, and mechanical testing experiments were performed. Micro Computed Tomography imaging was also employed to study the morphology of the foams. Over the course of the aging study the foams the decreased in size by a magnitude of 0.001 inches per inch of foam. Micro CT showed the heterogeneous nature of the foam structure likely resulting from flow effects during the molding process. The effect of aging on the compression and tensile strength of the foam was minor and no cause for concern. FT-IR spectroscopy was used to follow the foam chemistry. However, it was difficult to draw definitive conclusions about the changes in chemical nature of the materials due to large variability throughout the samples.

  9. Sensing the Structural Differences in Cellulose from Apple and Bacterial Cell Wall Materials by Raman and FT-IR Spectroscopy

    Directory of Open Access Journals (Sweden)

    Artur Zdunek

    2011-05-01

    Full Text Available Raman and Fourier Transform Infrared (FT-IR spectroscopy was used for assessment of structural differences of celluloses of various origins. Investigated celluloses were: bacterial celluloses cultured in presence of pectin and/or xyloglucan, as well as commercial celluloses and cellulose extracted from apple parenchyma. FT-IR spectra were used to estimate of the Iβ content, whereas Raman spectra were used to evaluate the degree of crystallinity of the cellulose. The crystallinity index (XCRAMAN% varied from −25% for apple cellulose to 53% for microcrystalline commercial cellulose. Considering bacterial cellulose, addition of xyloglucan has an impact on the percentage content of cellulose Iβ. However, addition of only xyloglucan or only pectins to pure bacterial cellulose both resulted in a slight decrease of crystallinity. However, culturing bacterial cellulose in the presence of mixtures of xyloglucan and pectins results in an increase of crystallinity. The results confirmed that the higher degree of crystallinity, the broader the peak around 913 cm−1. Among all bacterial celluloses the bacterial cellulose cultured in presence of xyloglucan and pectin (BCPX has the most similar structure to those observed in natural primary cell walls.

  10. ATR-FT-IR spectroscopy in the region of 550-230 cm -1 for identification of inorganic pigments

    Science.gov (United States)

    Vahur, Signe; Teearu, Anu; Leito, Ivo

    2010-03-01

    A comprehensive study of ATR-FT-IR spectra of 40 inorganic pigments of different colours widely used in historical paintings has been carried out in the low wave number spectral range (550-230 cm -1). The infrared spectra were recorded from mixtures of pigment and linseed oil. It is demonstrated that this spectral range - essentially devoid of absorption peaks of the common binder materials - can be well used for identification of inorganic pigments in paint samples thereby markedly extending the possibilities of pigment identification/confirmation by ATR-IR spectroscopy into the realm of pigments having no absorptions in the mid-IR region. In some cases the method can be used alone for pigment identification and in many cases it provides useful additional evidence for pigment identification using other instrumental techniques (electron microprobe analysis, XRF, optical microscopy). Together with earlier work this study provides a comprehensive overview of the pigment identification possibilities using ATR-FT-IR as well as a collection of reference spectra and is expected to be a useful reference for conservation practitioners.

  11. EVOLVED GAS ANALYSIS (COUPLED TG-DSC-FT-IR APPLIED IN THE STUDY OF FRUCTOOLIGOSACCHARIDES FROM CHICORY

    Directory of Open Access Journals (Sweden)

    Roberta de Souza Leone

    2014-08-01

    Full Text Available EGA (Evolved Gas Analysis is a group of coupled techniques (in this case TG-DSC and FT-IR that was used to provide information about the thermal and calorimetric behavior of standard fructooligosaccharides (FOS from chicory. These FOS are found in several foods (tuber, roots, fruits, leaves, cereals, etc. and have been the subject of several studies. In the present study thermogravimetry (TG allowed the characterization of FOS a standard (Sigma-Aldrich, in which the weight loss can be observed in three stages (m 7.56, 55.53 and 36.53%, respectively. The simultaneous use of DSC showed endo and exothermic events in temperature characteristics and in agreement with TG curves. The enthalpies of the main stages of decomposition were calculated: ΔHdehydr 260 J g-1 and ΔHdec 410 J g-1. From the FT-IR spectrum of the volatiles was possible to characterize the main bands, which confirmed CO and CO2 as a result of thermal decomposition.

  12. ATR FT-IR spectroscopy on Vmh2 hydrophobin self-assembled layers for Teflon membrane bio-functionalization

    Energy Technology Data Exchange (ETDEWEB)

    Portaccio, M., E-mail: marianna.portaccio@unina2.it [Dipartimento di Medicina Sperimentale – Seconda Università di Napoli, Via S.M. di Costantinopoli, 16-80134 Napoli (Italy); Gravagnuolo, A.M., E-mail: alfredomaria.gravagnuolo@unina.it [Dipartimento di Scienze Chimiche, Università “Federico II”, Via Cintia, 21- 80126 Napoli (Italy); Longobardi, S., E-mail: sara.longobardi@unina.it [Dipartimento di Scienze Chimiche, Università “Federico II”, Via Cintia, 21- 80126 Napoli (Italy); Giardina, P., E-mail: paola.giardina@unina.it [Dipartimento di Scienze Chimiche, Università “Federico II”, Via Cintia, 21- 80126 Napoli (Italy); Rea, I., E-mail: ilaria.rea@na.imm.cnr.it [Institute for Microelectronics and Microsystems, CNR, Via P. Castellino, 111-80131 Napoli (Italy); De Stefano, L., E-mail: luca.destefano@na.imm.cnr.it [Institute for Microelectronics and Microsystems, CNR, Via P. Castellino, 111-80131 Napoli (Italy); Cammarota, M., E-mail: marcella.cammarota@unina2.it [Dipartimento di Medicina Sperimentale – Seconda Università di Napoli, Via S.M. di Costantinopoli, 16-80134 Napoli (Italy); Lepore, M., E-mail: maria.lepore@unina2.it [Dipartimento di Medicina Sperimentale – Seconda Università di Napoli, Via S.M. di Costantinopoli, 16-80134 Napoli (Italy)

    2015-10-01

    Graphical abstract: - Highlights: • Hydrophobin self-assembled layers on Teflon in different preparation conditions were investigated. • ATR collection data geometry allowed samples examination without any particular preparation. • Amide content, lipid/amide and carbohydrate/amide ratios of the protein layer were estimated. • Secondary structure of protein was determined for the examined samples. • FT-IR demonstrated to be of extreme relevance in monitoring hydrophobin self-assembled layers preparation. - Abstract: Surface functionalization by layers of hydrophobins, amphiphilic proteins produced by fungi offers a promising and green strategy for fabrication of biomedical and bioanalytical devices. The layering process of the Vmh2 hydrophobin from Pleurotus ostreatus on Teflon membrane has been investigated by Attenuated Total Reflection Fourier Transform Infrared (ATR FT-IR) spectroscopy. In particular, protein layers obtained with hydrophobin purified with two different procedures and in various coating conditions have been examined. The layers have been characterized by quantifying the amide I and amide II band area together with the lipid/amide ratio and carbohydrate/amide ratio. This characterization can be very useful in evaluating the best purification strategy and coating conditions. Moreover the analysis of the secondary structure of the layered protein using the deconvolution procedure of amide I band indicate the prevalent contribution from β-sheet state. The results inferred by infrared spectroscopy have been also confirmed by scanning electron microscopy imaging.

  13. Identification and Quantification of Microplastics in Wastewater Using Focal Plane Array-Based Reflectance Micro-FT-IR Imaging.

    Science.gov (United States)

    Tagg, Alexander S; Sapp, Melanie; Harrison, Jesse P; Ojeda, Jesús J

    2015-06-16

    Microplastics (microplastics in these matrices has not been investigated. Although efficient methods for the analysis of microplastics in sediment samples and marine organisms have been published, no methods have been developed for detecting these pollutants within organic-rich wastewater samples. In addition, there is no standardized method for analyzing microplastics isolated from environmental samples. In many cases, part of the identification protocol relies on visual selection before analysis, which is open to bias. In order to address this, a new method for the analysis of microplastics in wastewater was developed. A pretreatment step using 30% hydrogen peroxide (H2O2) was employed to remove biogenic material, and focal plane array (FPA)-based reflectance micro-Fourier-transform (FT-IR) imaging was shown to successfully image and identify different microplastic types (polyethylene, polypropylene, nylon-6, polyvinyl chloride, polystyrene). Microplastic-spiked wastewater samples were used to validate the methodology, resulting in a robust protocol which was nonselective and reproducible (the overall success identification rate was 98.33%). The use of FPA-based micro-FT-IR spectroscopy also provides a considerable reduction in analysis time compared with previous methods, since samples that could take several days to be mapped using a single-element detector can now be imaged in less than 9 h (circular filter with a diameter of 47 mm). This method for identifying and quantifying microplastics in wastewater is likely to provide an essential tool for further research into the pathways by which microplastics enter the environment.

  14. FT-IR Method for the Quantification of Isoflavonol Glycosides in Nutritional Supplements of Soy (Glycine max (L.) MERR.).

    Science.gov (United States)

    Mulsow, Katharina; Eidenschink, Juliane; Melzig, Matthias F

    2015-01-01

    Due to increasing health consciousness, a lot of food supplements are sold and used. Dietary supplements of Glycine max (L.) MERR. are used as an alternative treatment for menopausal complaints such as hot flashes. Thereby, the effective soy compounds are the isoflavones daidzin, genistin, and glycitin. However, only the total soy extract content of the nutritional supplements is indicated. The aim of this study is to introduce a fast, efficient, and economic Fourier transformation infrared (FT-IR) spectroscopy method to quantify the active ingredients in the complex matrix of soy-based supplements. Five different nutritional supplements of Glycine max (L.) MERR. were purchased from a German pharmacy and were extracted with 80% aqueous methanol. A high-performance liquid chromatography (HPLC) method was used for the separation. The samples were concentrated and measured with infrared spectroscopy. An FT-IR method was established to quantify the active ingredients in the complex matrix of soy-based nutritional supplements. The partial least-squares algorithm was used to develop the method, which enabled the estimation of the content of particular isoflavones (daidzin R(2) = 0.86, glycitin R(2) = 0.94, genistin R(2) = 0.96) and the quantification of the total isoflavone content (R(2) = 0.92) despite peak overlap in the infrared (IR) spectra. The method for the quantification of the isoflavonol glycosides is precise with the standard error of prediction being 13.54%.

  15. Discrimination of five species of Fritillaria and its extracts by FT-IR and 2D-IR

    Science.gov (United States)

    Li, Dan; Jin, Zhexiong; Zhou, Qun; Chen, Jianbo; Lei, Yu; Sun, Suqin

    2010-06-01

    Bulbus Fritillariae (in Chinese named Beimu), referred to the bulbs of several Fritillaria species ( Liliaceae), is a commonly used anti-tussive and expectorant herb in traditional Chinese medicine (TCM) for more than 2000 years. The objective of this study is to discriminate five species of Beimu herbs and their total alkaloid extracts by Fourier transform infrared spectroscopy (FT-IR), second derivative infrared spectroscopy, and two-dimensional correlation infrared spectroscopy (2D-IR) under thermal perturbation. The structural information of the samples indicated that, Beimu and their extract residues contain a large amount of starch, since some characteristic absorption peaks of the starch, such as 1158, 1080, 1015 and 987 cm -1 can be observed. Further more, the characteristic absorption peaks of the sulfate which arouse at 1120 ± 5 and 618 cm -1 in the IR spectra of Beimu aqueous extracts can be find. This validated that people used the sulfur fumigation method in the processing. The macroscopical fingerprint characters of FT-IR and 2D-IR spectra can not only provide the information of main chemical constituents in medicinal materials and their different extracts, but also compare the components differences among the similar samples. In conclusion, the multi-steps IR macro-fingerprint method is rapid, effective, visual and accurate for pharmaceutical research.

  16. The effect of arsenic exposure on the biochemical and mineral contents of Labeo rohita bones: An FT-IR study

    Science.gov (United States)

    Palaniappan, PL. RM.; Vijayasundaram, V.

    2009-01-01

    Arsenic compounds are ubiquitous and widespread in the environment as a result of natural or anthropogenic occurrence. Fish are the major source of protein for human consumption. They are also a source of contamination, because of the amounts of heavy elements they can contain, some of which are highly toxic. Fish bones are high in calcium, which is an essential mineral for normal body function. It consists of water, organic material, and mineral matter. Chelating agents have been used clinically as antidotes for acute and chronic metal intoxications. In the present study, an attempt is made to investigate the bio-accumulation of arsenic and its effect on the biochemical and mineral contents of Labeo rohita bones using, Fourier transform infrared (FT-IR) spectroscopy. The results of the present study indicate that arsenic exposure induces significant reduction on the biochemical and mineral contents of the L. rohita bones. Further, the DMSA treatment significantly improves these levels. This shows that DMSA is an effective chelator for arsenic toxicity. Quantitative curve-fitting analyses of amide I band have proved useful in studying the nature and the extent of protein conformational changes. A decrease in α-helical and random coil structures and an increase in β-sheet structures have been observed due to arsenic exposure. In conclusion, the present study shows that the FT-IR spectroscopy coupled with second derivative and curve-fitting analysis gives useful information about the biochemical and mineral contents of the L. rohita bones.

  17. Traceability of Boletaceae Mushrooms Using Data Fusion of UV-vis and FT-IR Combined with Chemometrics Methods.

    Science.gov (United States)

    Yao, Sen; Li, Tao; Liu, HongGao; Li, JieQing; Wang, YuanZhong

    2017-09-30

    Boletaceae mushrooms are wild-grown edible mushrooms which have high nutrition, delicious flavor and large economic value distributing in Yunnan Province, China. Traceability is important for the authentication and quality assessment of Boletaceae mushrooms. In this study, ultraviolet visible (UV-vis) and Fourier transform infrared (FT-IR) spectroscopies were applied for traceability of 247 Boletaceae mushroom samples in combination with chemometrics. Compared with single spectroscopy technique, data fusion strategy can obviously improve the classification performance in PLS-DA and GS-SVM models, both species and geographical origins traceabilities. In addition, PLS-DA and GS-SVM models can provide 100.00% accuracy for species traceability, and have reliable evaluation parameters. For geographical origins traceability, the accuracy of prediction in PLS-DA model by data fusion was just 64.63%, but the GS-SVM model based on data fusion was 100.00%. The results demonstrated that data fusion strategy of UV-vis and FT-IR combined with GS-SVM could provide the higher synergic effect for traceability of Boletaceae mushrooms and have a good generalization ability for the comprehensive quality control and evaluation of similar food. This article is protected by copyright. All rights reserved.

  18. FT-IR and thermoluminescence investigation of P2O5-BaO-K2O glass system

    Science.gov (United States)

    Ivascu, C.; Timar-Gabor, A.; Cozar, O.

    2013-11-01

    The 0.5P2O5ṡxBaOṡ(0.5-x)K2O glass system (0≤x≤0.5mol%) is investigated by FT-IR and thermoluminescence as a possible dosimetic material. FT-IR spectra show structural network modifications with the composition variations of the studied glasses. The predominant absorption bands are characterized by two broad peaks near 500 cm-1, two weak peaks around 740 cm-1 and three peaks in the 900-1270 cm-1 region. The shift in the position of the band assigned to asymmetric stretching of PO2- group, υas(PO2-) modes from ˜1100 cm-1 to 1085 cm-1 and the decrease in its relative intensity with the increasing of K2O content shows a network modifier role of this oxide.. Luminescence investigations show that by adding modifier oxides in the phosphate glass a dose dependent TL signals result upon irradiation. Thus P2O5-BaO-K2O glass system is a possible candidate material for dosimetry in the dose 0 - 50 Gy range.

  19. A four class model for digital breast histopathology using high-definition Fourier transform infrared (FT-IR) spectroscopic imaging

    Science.gov (United States)

    Mittal, Shachi; Wrobel, Tomasz P.; Leslie, L. S.; Kadjacsy-Balla, Andre; Bhargava, Rohit

    2016-03-01

    High-definition (HD) Fourier transform infrared (FT-IR) spectroscopic imaging is an emerging technique that not only enables chemistry-based visualization of tissue constituents, and label free extraction of biochemical information but its higher spatial detail makes it a potentially useful platform to conduct digital pathology. This methodology, along with fast and efficient data analysis, can enable both quantitative and automated pathology. Here we demonstrate a combination of HD FT-IR spectroscopic imaging of breast tissue microarrays (TMAs) with data analysis algorithms to perform histologic analysis. The samples comprise four tissue states, namely hyperplasia, dysplasia, cancerous and normal. We identify various cell types which would act as biomarkers for breast cancer detection and differentiate between them using statistical pattern recognition tools i.e. Random Forest (RF) and Bayesian algorithms. Feature optimization is integrally carried out for the RF algorithm, reducing computation time as well as redundant spectral features. We achieved an order of magnitude reduction in the number of features with comparable prediction accuracy to that of the original feature set. Together, the demonstration of histology and selection of features paves the way for future applications in more complex models and rapid data acquisition.

  20. X-ray (Radial Distribution Function, RDF) and FT-IR analysis of high sulphur Tirap (India) coal

    Energy Technology Data Exchange (ETDEWEB)

    Saikia, B.K.; Boruah, R.K.; Gogoi, P.K. [North East Institute of Science & Technology CSIR, Jorhat (India)

    2009-06-15

    A preliminary study has been performed on high sulphur coals from Tirap colliery of Assam, India, using X-ray (RDF) technique and FT-IR spectroscopy. XRD pattern of the coal shows that it is amorphous in nature. Function of radial distribution analysis (FRDA) indicates that coal is lignite in type and there is no evidence of graphite like structures. The first maximum in the FRDA at R=0.133 nm relates to the C-C aliphatic bond (type C-CH=CH-C), and the second maximum at R=0.25 nm relates to the distance between carbon atoms of aliphatic chains that are located across one carbon atom. The curve intensity profiles obtained from FRDA show quite regular molecular packets for this coal. FT-IR study shows the presence of aliphatic -CH, -CH{sub 2} and -CH{sub 3} groups, aliphatic C-O-C stretching associated with -OH and -NH stretching vibrations and HCC rocking (single and condensed rings).

  1. Qualitative and quantitative study of polymorphic forms in drug formulations by near infrared FT-Raman spectroscopy

    Science.gov (United States)

    Auer, Martin E.; Griesser, Ulrich J.; Sawatzki, Juergen

    2003-12-01

    Near infrared FT-Raman spectroscopy was applied for the determination of polymorphic forms in a number of commercial drug products containing the polymorphic drug compounds sorbitol, mannitol, famotidine, acemetacin, carbamazepine, meprobamate and phenylbutazone. The crystal forms present in the drug products were identified based on the position, intensity and shape of characteristic bands. Quantitative analysis of a mixture of two crystal forms of mannitol in a drug product was carried out using a partial least-squares method. In drug products containing meprobamate, sorbitol, and carbamazepine, the thermodynamically stable form was found exclusively, whereas metastable polymorphs were found in solid dosage forms of acemetacin, phenylbutazone, famotidine and mannitol. A mixture of two polymorphic forms of mannitol in Lipobay tablets was determined to consist of 30.8±3.8% of the metastable modification I. The simple sample preparation, the occurrence of sharp bands in the spectra as well as the high reproducibility and accuracy qualifies FT-Raman spectroscopy for the identification and quantification of crystal forms in drug products. The method is perfectly suited to meet the regulatory requirements of monitoring crystal forms during processing and storage and often succeeds in detecting the present crystal form in drug products even when the used excipients are not known.

  2. FT-Raman spectroscopic characterization of enamel surfaces irradiated with Nd:YAG and Er:YAG lasers

    Science.gov (United States)

    Shahabi, Sima; Fekrazad, Reza; Johari, Maryam; Chiniforoush, Nasim; Rezaei, Yashar

    2016-01-01

    Background. Despite recent advances in dental caries prevention, caries is common and remains a serious health problem. Laser irradiation is one of the most common methods in preventive measures in recent years. Raman spectroscopy technique is utilized to study the microcrystalline structure of dental enamel. In this study, FT-Raman spectroscopy was used to evaluate chemical changes in enamel structure irradiated with Nd:YAG and Er:YAG lasers. Methods. We used 15 freshly-extracted, non-carious, human molars that were treated as follows: No treatment was carried out in group A (control group); Group B was irradiated with Er:YAG laser for 10 seconds under air and water spray; and Group C was irradiated with Nd:YAG laser for 10 seconds under air and water spray. After treatment, the samples were analyzed by FT-Raman spectroscopy. Results. The carbonate content evaluation with regard to the integrated area under the curve (1065/960 cm–1) exhibited a significant reduction in its ratio in groups B and C. The organic content (2935/960 cm-1) area exhibited a significant decrease after laser irradiation in group B and C. Conclusion. The results showed that the mineral and organic matrices of enamel structure were affected by laser irradiation; therefore, it might be a suitable method for caries prevention. PMID:28096945

  3. FT-Raman spectroscopic characterization of enamel surfaces irradiated with Nd:YAG and Er:YAG lasers

    Directory of Open Access Journals (Sweden)

    Sima Shahabi

    2016-12-01

    Full Text Available Background. Despite recent advances in dental caries prevention, caries is common and remains a serious health problem. Laser irradiation is one of the most common methods in preventive measures in recent years. Raman spectroscopy technique is utilized to study the microcrystalline structure of dental enamel. In this study, FT-Raman spectroscopy was used to evaluate chemical changes in enamel structure irradiated with Nd:YAG and Er:YAG lasers. Methods. We used 15 freshly-extracted, non-carious, human molars that were treated as follows: No treatment was carried out in group A (control group; Group B was irradiated with Er:YAG laser for 10 seconds under air and water spray; and Group C was irradiated with Nd:YAG laser for 10 seconds under air and water spray. After treatment, the samples were analyzed by FT-Raman spectroscopy. Results. The carbonate content evaluation with regard to the integrated area under the curve (1065/960 cm–1 exhibited a significant reduction in its ratio in groups B and C. The organic content (2935/960 cm-1 area exhibited a significant decrease after laser irradiation in group B and C. Conclusion. The results showed that the mineral and organic matrices of enamel structure were affected by laser irradiation; therefore, it might be a suitable method for caries prevention.

  4. Caracterização por FT-IR de agentes de cura utilizados em resinas epoxídicas-II-polimercaptana, poliaminoamida e amina modificada

    Directory of Open Access Journals (Sweden)

    Romão Benedita M. V.

    2003-01-01

    Full Text Available Amostras de resina epoxídica (EP curadas com compostos à base depolimercaptana (SH, SH na presença de poliamino amida, e amina modificada, constituindo, respectivamente, os sistemas epoxídicos (SE 1, 2 e 3, foram preparadas segundo condições estabelecidas pelas curvas de calorimetria exploratória diferencial (DSC de EP e agentes de cura, ou endurecedores (AC e analisadas, antes e após preparação do SE, por espectroscopia no infravermelho com transformada de Fourier (FT-IR por meio de técnicas de transmissão (pastilha de KBr, pirólise por bico de Bunsen, e pirólisecontrolada (CONTROLPIR/FT-IR dentro da faixa de temperatura fornecida pela análise termogravimétrica (TG dos SE 1, 2 e 3, para a caracterização de cada AC. Para tal fim, as absorções FT-IR do pirolisado líquido obtido pela metodologia CONTROLPIR/FT-IR foram avaliadas, em comparação ao espectro do AC de referência. A caracterização dos agentes de cura foi feita com a técnica TG/FT-IR do gás liberado de cada SE, em comparação ao espectro de referência do produto de degradação do respectivo AC.

  5. Attenuated total reflectance FT-IR imaging and quantitative energy dispersive-electron probe X-ray microanalysis techniques for single particle analysis of atmospheric aerosol particles.

    Science.gov (United States)

    Ryu, JiYeon; Ro, Chul-Un

    2009-08-15

    This work demonstrates the practical applicability of the combined use of attenuated total reflectance (ATR) FT-IR imaging and low-Z particle electron probe X-ray microanalysis (EPMA) techniques for the characterization of individual aerosol particles. These two single particle analytical techniques provide complementary information on the physicochemical characteristics of the same individual particles, that is, the low-Z particle EPMA for the information on the morphology and elemental concentration and the ATR-FT-IR imaging on the functional group, molecular species, and crystal structure. It was confirmed that the ATR-FT-IR imaging technique can provide sufficient FT-IR absorption signals to perform molecular speciation of individual particles of micrometer size when applied to artificially generated aerosol particles such as ascorbic acid and NaNO(3) aerosols. An exemplar indoor atmospheric aerosol sample was investigated to demonstrate the practical feasibility of the combined application of ATR-FT-IR imaging and low-Z particle EPMA techniques for the characterization of individual airborne particles.

  6. In Situ Analysis of a High-Temperature Cure Reaction in Real Time Using Modulated Fiber-Optic FT-Raman Spectroscopy

    Science.gov (United States)

    Aust, Jeffrey F.; Cooper, John B.; Wise, Kent L.; Jensen, Brian J.

    1999-01-01

    The vibrational spectrum of a high-temperature (330 C) polymerization reaction was successfully monitored in real time with the use of a modulated fiber-optic Fourier transform (FT)-Raman spectrometer. A phenylethynyl-terminated monomer was cured, and spectral evidence for two different reaction products was acquired. The products are a conjugated polyene chain and a cyclized trimer. This is the first report describing the use of FT-Raman spectroscopy to monitor a high temperature (greater than 250 C) reaction in real time.

  7. Vibrational (FT-IR, Raman) and DFT analysis on the structure of labile drugs. The case of crystalline tebipenem and its ester

    Science.gov (United States)

    Paczkowska, Magdalena; Mizera, Mikołaj; Dzitko, Jakub; Lewandowska, Kornelia; Zalewski, Przemysław; Cielecka-Piontek, Judyta

    2017-04-01

    A tebipenem is active form of the first, oral carbapenem antibiotic - tebipenem pivoxyl. The optimized conformations of tebipenem pivoxyl and tebipenem were determinated by quantum-chemical calculations performed with the use of B3LYP functional and 6-31G(d,p) as a basis set. For the most stable conformations of tebipenem and its ester were established theoretical Raman and FT-IR spectra. The theoretical approach in significant part was support for identification of experimental Raman (400-4000 cm-1) and FT-IR (100-4000 cm-1) of tebipenem and tebipenem pivoxil. The geometric structure of molecules, HOMO and LUMO orbitals and molecular electrostatic potential were also determined. The benefits of applying FT-IR and Raman scattering spectroscopy for characterization of tebipenem and its ester consisted in demonstrating differences in their spectral properties.

  8. Real-time feedback control using online attenuated total reflection Fourier transform infrared (ATR FT-IR) spectroscopy for continuous flow optimization and process knowledge.

    Science.gov (United States)

    Skilton, Ryan A; Parrott, Andrew J; George, Michael W; Poliakoff, Martyn; Bourne, Richard A

    2013-10-01

    The use of automated continuous flow reactors is described, with real-time online Fourier transform infrared spectroscopy (FT-IR) analysis to enable rapid optimization of reaction yield using a self-optimizing feedback algorithm. This technique has been applied to the solvent-free methylation of 1-pentanol with dimethyl carbonate using a γ-alumina catalyst. Calibration of the FT-IR signal was performed using gas chromatography to enable quantification of yield over a wide variety of flow rates and temperatures. The use of FT-IR as a real-time analytical technique resulted in an order of magnitude reduction in the time and materials required compared to previous studies. This permitted a wide exploration of the parameter space to provide process understanding and validation of the optimization algorithms.

  9. Ion Association in Hydrothermal Sodium Sulfate Solutions Studied by Modulated FT-IR-Raman Spectroscopy and Molecular Dynamics.

    Science.gov (United States)

    Reimer, Joachim; Steele-MacInnis, Matthew; Wambach, Jörg M; Vogel, Frédéric

    2015-07-30

    Saline aqueous solutions at elevated pressures and temperatures play an important role in processes such as supercritical water oxidation (SCWO) and supercritical water gasification (SCWG), as well as in natural geochemical processes in Earth and planetary interiors. Some solutions exhibit a negative temperature coefficient of solubility at high temperatures, thereby leading to salt precipitation with increasing temperature. Using modulated FT-IR Raman spectroscopy and classical molecular dynamics simulations (MD), we studied the solute speciation in solutions of 10 wt % Na2SO4, at conditions close to the saturation limit. Our experiments reveal that ion pairing and cluster formation are favored as solid saturation is approached, and ionic clusters form prior to the precipitation of solid sulfate. The proportion of such clusters increases as the phase boundary is approached either by decreasing pressure or by increasing temperature in the vicinity of the three-phase (vapor-liquid-solid) curve.

  10. Differentiation of Body Fluid Stains on Fabrics Using External Reflection Fourier Transform Infrared Spectroscopy (FT-IR) and Chemometrics.

    Science.gov (United States)

    Zapata, Félix; de la Ossa, Ma Ángeles Fernández; García-Ruiz, Carmen

    2016-04-01

    Body fluids are evidence of great forensic interest due to the DNA extracted from them, which allows genetic identification of people. This study focuses on the discrimination among semen, vaginal fluid, and urine stains (main fluids in sexual crimes) placed on different colored cotton fabrics by external reflection Fourier transform infrared spectroscopy (FT-IR) combined with chemometrics. Semen-vaginal fluid mixtures and potential false positive substances commonly found in daily life such as soaps, milk, juices, and lotions were also studied. Results demonstrated that the IR spectral signature obtained for each body fluid allowed its identification and the correct classification of unknown stains by means of principal component analysis (PCA) and soft independent modeling of class analogy (SIMCA). Interestingly, results proved that these IR spectra did not show any bands due to the color of the fabric and no substance of those present in daily life which were analyzed, provided a false positive.

  11. ATR-FT-IR spectroscopy in the region of 500-230 cm -1 for identification of inorganic red pigments

    Science.gov (United States)

    Vahur, Signe; Knuutinen, Ulla; Leito, Ivo

    2009-08-01

    It is demonstrated that micro-ATR-FT-IR in the low wave number range (500-230 cm -1) can be well used for identification of pigments in paint samples thereby markedly extending the possibilities of pigment identification by ATR-IR spectroscopy into the realm of pigments having no absorptions in the mid-IR region. Reference spectra of pigments can be conveniently obtained by mixing them with linseed oil in approximately 1:1 mass ratio. Vermilion (or cinnabar), read lead, different red iron oxide pigments and cadmium red can be identified. In some cases the method can be used alone for pigment identification and in many cases it provides useful additional evidence for pigment identification using other instrumental techniques (electron microprobe analysis, XRF, optical microscopy).

  12. FT-IR spectroscopy assessment of aesthetic dental materials irradiated with low-dose therapeutic ionizing radiation

    Science.gov (United States)

    Cruz, A. D.; Almeida, S. M.; Rastelli, A. N. S.; Bagnato, V. S.; Byscolo, F. N.

    2009-03-01

    The aim of the present study was to evaluate the effects of low-dose therapeutic ionizing radiation on different aesthetic dental materials. Forty five specimens ( n = 45) of three different aesthetic restorative materials were prepared and randomly divided into five groups: G1 (control group); G2, G3, G4, G5 experimental groups irradiated respectively with 0.25, 0.50, 0.75, and 1.00 Gy of gamma radiation by the 60Co teletherapy machine. Chemical analyses were performed using a FT-IR Nicolet 520 spectrophotometer with reflectance diffuse technique. Even a minimal exposition at ionizing radiation in therapeutic doses can provide chemical changes on light-cured composite resins. The three studied restorative materials showed changes after exposure at gamma radiation, however the increase of the radiation dose did not contribute to an increase in this effect.

  13. THE SULFONATION STUDY OF REACTION MECHANISM ON PAPAVERINE ALKALOID BY GC-MS AND FT-IR

    Directory of Open Access Journals (Sweden)

    I Made Sudarma

    2010-06-01

    Full Text Available The aim of this research was to prove theoretical mechanism reaction on the sulfonation of papaverine alkaloid and the result could be used as a reference on the transformation of these alkaloid to the other derivatives. Theoriticaly sulfonation of papaverine (1 by HO-SO2Cl could produced papaverine sulfonyl chloride (1a. The formation of this product was analyzed by analytical thin layer chromatography GC-MS, and FT-IR. These analysis showed the formation of product (1a more favorable than the other. Tlc showed product (1a less polar than papaverine, and supported by GC-MS and infrared which showed molecular ion at m/z 412 due to the presence of -SO2Cl and vibration at 1153,4 dan 1265,2 Cm-1 due to absorption of sulfonyl group.   Keywords: reaction mechanism, sulfonation, papaverine alkaloid.

  14. FT-IR spectroscopic, AM1 and PM3 computational studies of conformation of natural products: cytisine.

    Science.gov (United States)

    Górnicka, Elzbieta; Raczyńska, Ewa D

    2002-06-10

    Infrared spectra were recorded for cytisine (1) and its model compounds: N-methyl-2-pyridone (2) and piperidine (3) in solution. Eight solvents of different polarity, polarizability and acid-base properties: CCl(4), CS(2), CHCl(3), CDCl(3) (for comparison with the NMR spectra), CH(2)Cl(2), MeOH, Et(2)O and Et(3)N were chosen. Experimental FT-IR spectra were analysed with the help of those calculated for isolated derivatives at the AM1 and PM3 levels. Influence of environment on the conformational preferences in solvated cytisine was discussed and compared with those in the solid state (X-ray measurements) and in the gas phase (quantum-mechanical calculations).

  15. Solid state 13C NMR and FT-IR spectroscopy of the cocoon silk of two common spiders

    Science.gov (United States)

    Bramanti, Emilia; Catalano, Donata; Forte, Claudia; Giovanneschi, Mario; Masetti, Massimo; Veracini, Carlo Alberto

    2005-11-01

    The structure of the silk from cocoons of two common spiders, Araneus diadematus (family Araneidae) and Achaearanea tepidariorum (family Theridiidae) was investigated by means of 13C solid state NMR and FT-IR spectroscopies. The combined use of these two techniques allowed us to highlight differences in the two samples. The cocoon silk of Achaearanea tepidariorum is essentially constituted by helical and β-sheet structures, whereas that of Araneus diadematus shows a more complex structure, containing also β-strands and β-turns. Moreover, the former silk is essentially crystalline while the latter contains more mobile domains. The structural differences of the two cocoon silks are ascribed to the different habitat of the two species.

  16. In vivo skin leptin modulation after 14 MeV neutron irradiation: a molecular and FT-IR spectroscopic study

    Energy Technology Data Exchange (ETDEWEB)

    Cestelli Guidi, M.; Mirri, C.; Marcelli, A. [Laboratori Nazionali di Frascati - INFN, Frascati, Rome (Italy); Fratini, E.; Amendola, R. [ENEA, UT BIORAD-RAB, Rome (Italy); Licursi, V.; Negri, R. [Universita La Sapienza, Dip. Biologia e Biotecnologie ' ' Charles Darwin' ' , Rome (Italy)

    2012-09-15

    This paper discusses gene expression changes in the skin of mice treated by monoenergetic 14 MeV neutron irradiation and the possibility of monitoring the resultant lipid depletion (cross-validated by functional genomic analysis) as a marker of radiation exposure by high-resolution FT-IR (Fourier transform infrared) imaging spectroscopy. The irradiation was performed at the ENEA Frascati Neutron Generator (FNG), which is specifically dedicated to biological samples. FNG is a linear electrostatic accelerator that produces up to 1.0 x 10{sup 11} 14-MeV neutrons per second via the D-T nuclear reaction. The functional genomic approach was applied to four animals for each experimental condition (unirradiated, 0.2 Gy irradiation, or 1 Gy irradiation) 6 hours or 24 hours after exposure. Coregulation of a subclass of keratin and keratin-associated protein genes that are physically clustered in the mouse genome and functionally related to skin and hair follicle proliferation and differentiation was observed. Most of these genes are transiently upregulated at 6 h after the delivery of the lower dose delivered, and drastically downregulated at 24 h after the delivery of the dose of 1 Gy. In contrast, the gene coding for the leptin protein was consistently upregulated upon irradiation with both doses. Leptin is a key protein that regulates lipid accumulation in tissues, and its absence provokes obesity. The tissue analysis was performed by monitoring the accumulation and the distribution of skin lipids using FT-IR imaging spectroscopy. The overall picture indicates the differential modulation of key genes during epidermis homeostasis that leads to the activation of a self-renewal process at low doses of irradiation. (orig.)

  17. On-Chip Micro-Electro-Mechanical System Fourier Transform Infrared (MEMS FT-IR) Spectrometer-Based Gas Sensing.

    Science.gov (United States)

    Erfan, Mazen; Sabry, Yasser M; Sakr, Mohammad; Mortada, Bassem; Medhat, Mostafa; Khalil, Diaa

    2016-05-01

    In this work, we study the detection of acetylene (C2H2), carbon dioxide (CO2) and water vapor (H2O) gases in the near-infrared (NIR) range using an on-chip silicon micro-electro-mechanical system (MEMS) Fourier transform infrared (FT-IR) spectrometer in the wavelength range 1300-2500 nm (4000-7692 cm(-1)). The spectrometer core engine is a scanning Michelson interferometer micro-fabricated using a deep-etching technology producing self-aligned components. The light is free-space propagating in-plane with respect to the silicon chip substrate. The moving mirror of the interferometer is driven by a relatively large stroke electrostatic comb-drive actuator corresponding to about 30 cm(-1) resolution. Multi-mode optical fibers are used to connect light between the wideband light source, the interferometer, the 10 cm gas cell, and the optical detector. A wide dynamic range of gas concentration down to 2000 parts per million (ppm) in only 10 cm length gas cell is demonstrated. Extending the wavelength range to the mid-infrared (MIR) range up to 4200 nm (2380 cm(-1)) is also experimentally demonstrated, for the first time, using a bulk micro-machined on-chip MEMS FT-IR spectrometer. The obtained results open the door for an on-chip optical gas sensor for many applications including environmental sensing and industrial process control in the NIR/MIR spectral ranges.

  18. ATR-FT/IR study on the interactions between gliadins and dextrin and their effects on protein secondary structure.

    Science.gov (United States)

    Secundo, Francesco; Guerrieri, Nicoletta

    2005-03-09

    The effects of heat treatment and dextrin addition on the secondary structure of gliadins were investigated by means of attenuated total reflection Fourier transform infrared spectroscopy (ATR-FT/IR). Gliadins and gliadin/dextrin mixtures (before and after thermal treatment) were prepared as a dried protein film on the ATR-FT/IR zinc selenide cell plate and equilibrated at a water activity (a(w)) of 0.06. The results show that gliadins undergo conformational changes upon thermal treatment both in the absence and in the presence of dextrin. In particular, in the thermally treated gliadins, the decrease of the band at around 1651 cm(-)(1) and the increase of the bands at around 1628 and 1690 cm(-)(1) suggest a loss of alpha-helix structure and a higher content of protein aggregates. The same trend was observed in the presence of dextrin. Concerning the interactions between gliadins and dextrin, gliadin/dextrin mixtures show variations in the amide I region compared to native gliadins (e.g., an increase of the band at 1645 cm(-)(1) and the absence of the band at around 1668 cm(-)(1)) that might be due to hydrogen bond formation between gliadins and dextrin. It was also found that the spectrum of gliadin/dextrin mixtures was less affected by the hydration state than that of native gliadins, as observed from the differential spectra obtained by subtraction of the spectrum obtained at a(w) = 0.06 (driest condition tested) from the spectrum of the sample equilibrated at a(w) = 0.84. This could be due to the fact that C=O and N-H groups of gliadins are engaged to form hydrogen bonds with the hydroxyl groups of dextrin, and so they are not perturbed by the presence of water molecules. Finally, water activity effects on the secondary structure of gliadins are also discussed.

  19. Application of FT-IR spectroscopy for control of the medium composition during the biodegradation of nitro aromatic compounds.

    Science.gov (United States)

    Grube, Mara; Muter, Olga; Strikauska, Silvija; Gavare, Marita; Limane, Baiba

    2008-11-01

    Previous studies showed that cabbage leaf extract (CLE) added to the growth medium can noticeably promote the degradation of nitro aromatic compounds by specific consortium of bacteria upon their growth. For further development of the approach for contaminated soil remediation it was necessary to evaluate the qualitative and/or quantitative composition of different origin CLE and their relevance on the growth of explosives-degrading bacteria. Six CLE (different by species, cultivars and harvesting time) were tested and used as additives to the growth medium. It was shown that nitro aromatic compounds can be identified in the FT-IR absorption spectra by the characteristic band at 1,527 cm(-1), and in CLE by the characteristic band at 1,602 cm(-1). The intensity of the CLE band at 1,602 cm(-1) correlated with the concentration of total nitrogen (R2=0.87) and decreased upon the growth of bacteria. The content of nitrogen in CLE differed (0.22-1.00 vol.%) and significantly influenced the content of total carbohydrates (9.50-16.00% DW) and lipids [3.90-9.90% dry weight (DW)] accumulated in bacterial cells while the content of proteins was similar in all samples. Though this study showed quantitative differences in the composition of the studied CLE and the response of bacterial cells to the composition of the growth media, and proved the potential of this additive for remediation of contaminated soil. It was shown that analysis of CLE and monitoring of the conversion of nitro aromatic compounds can be investigated by FT-IR spectroscopy as well as by conventional chemical methods.

  20. Estimation of Cellulose Crystallinity of Lignocelluloses Using Near-IR FT-Raman Spectroscopy and Comparison of the Raman and Segal-WAXS Methods

    Science.gov (United States)

    Umesh P. Agarwal; Richard R. Reiner; Sally A. Ralph

    2013-01-01

    Of the recently developed univariate and multivariate near-IR FT-Raman methods for estimating cellulose crystallinity, the former method was applied to a variety of lignocelluloses: softwoods, hardwoods, wood pulps, and agricultural residues/fibers. The effect of autofluorescence on the crystallinity estimation was minimized by solvent extraction or chemical treatment...

  1. Rapid, nondestructive estimation of surface polymer layer thickness using attenuated total reflection fourier transform infrared (ATR FT-IR) spectroscopy and synthetic spectra derived from optical principles.

    Science.gov (United States)

    Weinstock, B André; Guiney, Linda M; Loose, Christopher

    2012-11-01

    We have developed a rapid, nondestructive analytical method that estimates the thickness of a surface polymer layer with high precision but unknown accuracy using a single attenuated total reflection Fourier transform infrared (ATR FT-IR) measurement. Because the method is rapid, nondestructive, and requires no sample preparation, it is ideal as a process analytical technique. Prior to implementation, the ATR FT-IR spectrum of the substrate layer pure component and the ATR FT-IR and real refractive index spectra of the surface layer pure component must be known. From these three input spectra a synthetic mid-infrared spectral matrix of surface layers 0 nm to 10,000 nm thick on substrate is created de novo. A minimum statistical distance match between a process sample's ATR FT-IR spectrum and the synthetic spectral matrix provides the thickness of that sample. We show that this method can be used to successfully estimate the thickness of polysulfobetaine surface modification, a hydrated polymeric surface layer covalently bonded onto a polyetherurethane substrate. A database of 1850 sample spectra was examined. Spectrochemical matrix-effect unknowns, such as the nonuniform and molecularly novel polysulfobetaine-polyetherurethane interface, were found to be minimal. A partial least squares regression analysis of the database spectra versus their thicknesses as calculated by the method described yielded an estimate of precision of ±52 nm.

  2. Combining FT-IR spectroscopy and multivariate analysis for qualitative and quantitative analysis of the cell wall composition changes during apples development.

    Science.gov (United States)

    Szymanska-Chargot, M; Chylinska, M; Kruk, B; Zdunek, A

    2015-01-22

    The aim of this work was to quantitatively and qualitatively determine the composition of the cell wall material from apples during development by means of Fourier transform infrared (FT-IR) spectroscopy. The FT-IR region of 1500-800 cm(-1), containing characteristic bands for galacturonic acid, hemicellulose and cellulose, was examined using principal component analysis (PCA), k-means clustering and partial least squares (PLS). The samples were differentiated by development stage and cultivar using PCA and k-means clustering. PLS calibration models for galacturonic acid, hemicellulose and cellulose content from FT-IR spectra were developed and validated with the reference data. PLS models were tested using the root-mean-square errors of cross-validation for contents of galacturonic acid, hemicellulose and cellulose which was 8.30 mg/g, 4.08% and 1.74%, respectively. It was proven that FT-IR spectroscopy combined with chemometric methods has potential for fast and reliable determination of the main constituents of fruit cell walls.

  3. A novel FT-IR spectroscopic method based on lipid characteristics for qualitative and quantitative analysis of animal-derived feedstuff adulterated with ruminant ingredients.

    Science.gov (United States)

    Gao, Fei; Zhou, Simiao; Han, Lujia; Yang, Zengling; Liu, Xian

    2017-12-15

    The objective of this study was to explore the ability of Fourier transform infrared (FT-IR) spectroscopy to authenticate adulterated animal-derived feedstuff. A total of 18 raw meat and bone meals (MBMs), including 9 non-ruminant MBMs and 9 ruminant MBMs, were mixed to obtain 81 binary mixtures with specific proportions (1-35%). Lipid spectral characteristics were analyzed by FT-IR spectroscopy combined with chemometrics. Changes in FT-IR spectra were observed as adulterant concentration was varied. The results illustrate ruminant adulteration can be successfully distinguished based on lipid characteristics. PLS model was established to quantify ruminant adulteration, which was shown to be valid (R(2)P>0.90). Furthermore, the ratios of CC/CO and CC/CH(CH2), as well as the number of CH(CH2) in the fatty acids of adulterated lipids, were calculated, which showed that differences in the trans fatty acid content and the degree of unsaturation were the main contributors to determination of adulteration based on FT-IR spectroscopy. Copyright © 2017. Published by Elsevier Ltd.

  4. FT-IR and micro-Raman spectroscopic study of decorated potteries from VI and VII century BC, excavated in ancient Ainos Turkey

    Science.gov (United States)

    Akyuz, S.; Akyuz, T.; Basaran, S.; Bolcal, C.; Gulec, A.

    2007-05-01

    Ancient decorated pottery fragments belong to sixth and seventh century BC, excavated in the archaeological district of Enez - Turkey (Ancient Ainos) were analysed using micro-Raman and FT-IR spectroscopy. The experimental results allowed us to identify the peculiar components of the ceramic body and the main pigments of the decoration. The presence of albite and anatase suggests low firing temperatures.

  5. Effects of Low Carbohydrate High Protein (LCHP) diet on atherosclerotic plaque phenotype in ApoE/LDLR-/- mice: FT-IR and Raman imaging.

    Science.gov (United States)

    Wrobel, T P; Marzec, K M; Chlopicki, S; Maślak, E; Jasztal, A; Franczyk-Żarów, M; Czyżyńska-Cichoń, I; Moszkowski, T; Kostogrys, R B; Baranska, M

    2015-09-22

    Low Carbohydrate High Protein (LCHP) diet displays pro-atherogenic effects, however, the exact mechanisms involved are still unclear. Here, with the use of vibrational imaging, such as Fourier transform infrared (FT-IR) and Raman (RS) spectroscopies, we characterize biochemical content of plaques in Brachiocephalic Arteries (BCA) from ApoE/LDLR(-/-) mice fed LCHP diet as compared to control, recomended by American Institute of Nutrition, AIN diet. FT-IR images were taken from 6-10 sections of BCA from each mice and were complemented with RS measurements with higher spatial resolution of chosen areas of plaque sections. In aortic plaques from LCHP fed ApoE/LDLR(-/-) mice, the content of cholesterol and cholesterol esters was increased, while that of proteins was decreased as evidenced by global FT-IR analysis. High resolution imaging by RS identified necrotic core/foam cells, lipids (including cholesterol crystals), calcium mineralization and fibrous cap. The decreased relative thickness of the outer fibrous cap and the presence of buried caps were prominent features of the plaques in ApoE/LDLR(-/-) mice fed LCHP diet. In conclusion, FT-IR and Raman-based imaging provided a complementary insight into the biochemical composition of the plaque suggesting that LCHP diet increased plaque cholesterol and cholesterol esters contents of atherosclerotic plaque, supporting the cholesterol-driven pathogenesis of LCHP-induced atherogenesis.

  6. FT-IR, Laser-Raman spectra and computational analysis of 5-Methyl-3-phenylisoxazole-4-carboxylic acid

    Science.gov (United States)

    Sert, Yusuf; Mahendra, M.; Keskinoğlu, S.; Chandra; Srikantamurthy, N.; Umesha, K. B.; Çırak, Ç.

    2015-03-01

    In this study the experimental and theoretical vibrational frequencies of a newly synthesized anti-tumor, antiviral, hypoglycemic, antifungal and anti-HIV agent namely, 5-Methyl-3-phenylisoxazole-4-carboxylic acid has been investigated. The experimental FT-IR (4000-400 cm-1) and Laser-Raman spectra (4000-100 cm-1) of the molecule in solid phase have been recorded. The theoretical vibrational frequencies and optimized geometric parameters (bond lengths, bond angles and torsion angles) have been calculated by using density functional theory (DFT/B3LYP: Becke, 3-parameter, Lee-Yang-Parr and DFT/M06-2X: highly parametrized, empirical exchange correlation function) with 6-311++G(d,p) basis set by Gaussian 09W software, for the first time. The assignments of the vibrational frequencies have been done by potential energy distribution (PED) analysis by using VEDA 4 software. The theoretical optimized geometric parameters and vibrational frequencies have been found to be in good agreement with the corresponding experimental data and results in the literature. In addition, the highest occupied molecular orbital (HOMO) energy, the lowest unoccupied molecular orbital (LUMO) energy and the other related molecular energy values of the compound have been investigated by using the same theoretical calculations.

  7. A Study on the Surface Structures of Viscose-based Activated Carbon Fiber by FT-IR Spectroscopy and XPS

    Institute of Scientific and Technical Information of China (English)

    黄强; 黄永秋; 潘鼎

    2004-01-01

    Using viscose fiber (VF) as starting material and common steam as activating agent, formation of oxygen structures in activated carbon fiber is investigated. In the preparation of samples, VF was first heated at temperatures between 450℃ and 900℃ in N2 artmosphere. Then, in a successive activation stage, the product carbonized at 600℃ was activated in steam at 450 - 900℃ for 30 min, and at 600℃for 5- 30 min. The other carbonization products were activated at 600 and 900℃ for 30 min respectively. The products activated at 900℃ were then activated at 450℃ for 30 min again. The starting material, carbonized products and all activation products were examined by FT-IR spectroscopy and some products were examined by X-ray photoelectron spectroscope (XPS). And the yields of the carbonized and activated products were calculated. By analysing these spectra, the amount of oxygen-containing functional groups of the activated products attained under various activation time, various activation temperature and various previous carbonization temperature was determined.

  8. Ft-Ir Spectroscopic Analysis of Potsherds Excavated from the First Settlement Layer of Kuriki Mound, Turkey

    Science.gov (United States)

    Bayazit, Murat; Isik, Iskender; Cereci, Sedat; Issi, Ali; Genc, Elif

    The region covering Southeastern Anatolia takes place in upper Mesopotamia, so it has numerous cultural heritages due to its witness to various social movements of different civilizations in ancient times. Kuruki Mound is located on the junction point of Tigris River and Batman Creek, near Oymatas village which is almost 15 km to Batman, Turkey. The mound is dated back to Late Chalcolithic. Archaeological excavations are carried out on two hills named as “Kuriki Mound-1” and “Kuriki Mound-2” in which 4-layer and 2-layer settlements have been revealed, respectively. This region will be left under the water by the reservoir lake of Ilısu Dam when its construction is completed. Thus, characterization of ancient materials such as potsherds, metals and skeleton ruins should be rapidly done. In this study, 12 potsherds excavated from Layer-1 (the first settlement layer after the surface) in Kuriki Mound-2 were investigated by FT-IR spectrometry. Energy dispersive X-ray fluorescence (EDXRF) and X-ray diffraction (XRD) analyses were used as complementary techniques in order to expose chemical and mineralogical/phase contents, respectively. Obtained results showed that the potteries have been produced with calcareous clays and they include moderate amounts of MgO, K2O, Na2O and Fe2O3 in this context. Additionally, high temperature phases have also been detected with XRD analyses in some samples.

  9. Single cell synchrotron FT-IR microspectroscopy reveals a link between neutral lipid and storage carbohydrate fluxes in S. cerevisiae.

    Directory of Open Access Journals (Sweden)

    Frédéric Jamme

    Full Text Available In most organisms, storage lipids are packaged into specialized structures called lipid droplets. These contain a core of neutral lipids surrounded by a monolayer of phospholipids, and various proteins which vary depending on the species. Hydrophobic structural proteins stabilize the interface between the lipid core and aqueous cellular environment (perilipin family of proteins, apolipoproteins, oleosins. We developed a genetic approach using heterologous expression in Saccharomyces cerevisiae of the Arabidopsis thaliana lipid droplet oleosin and caleosin proteins AtOle1 and AtClo1. These transformed yeasts overaccumulate lipid droplets, leading to a specific increase in storage lipids. The phenotype of these cells was explored using synchrotron FT-IR microspectroscopy to investigate the dynamics of lipid storage and cellular carbon fluxes reflected as changes in spectral fingerprints. Multivariate statistical analysis of the data showed a clear effect on storage carbohydrates and more specifically, a decrease in glycogen in our modified strains. These observations were confirmed by biochemical quantification of the storage carbohydrates glycogen and trehalose. Our results demonstrate that neutral lipid and storage carbohydrate fluxes are tightly connected and co-regulated.

  10. Biosorption of Lead and Copper by Heavy Metal Resistance Bacterium using Fourier Transform Infrared Spectrophotometer (FT IR

    Directory of Open Access Journals (Sweden)

    This paper should be cited as: Mohseni M, Khosravi F, Mohadjerani M, Chaichi, MJ . [ Biosorption of Lead and Copper by Heavy Metal Resistance Bacterium using Fourier Transform Infrared Spectrophotometer (FT - IR ]. MLJ. 201 4 ; 8 ( 3 : [Article in Persian] Mohseni, M. (PhD

    2014-09-01

    Full Text Available Background and Objectives: Contamination of environment to lead and copper is rising due to human activities. One of the best methods to remove heavy metals from the environment is bacterial remediation. This study aimed to isolate bacteria and investigate the mechanism of lead and copper bioremediation. Material and Methods: Heavy metal resistant bacteria were isolated from contaminated wastewater samples. The isolates with high resistance to lead and copper were selected for further studies and bioremediation was assessed by atomic absorption spectrophotometer. To determine the functional groups to remove metals, FT-IR was employed. In addition, plasmid curing was studied to determine the location of the genes that are resistance to heavy metals. Results: Ten bacterial isolates that are resistance to heavy metals were isolated. Among these, MKH3 with the highest remediation activity removed %90 lead and %92 copper from the growth medium. The absorption mechanism of MKH3 indicated that the functional groups such as carboxyl, amide, carbonyl and hydroxyl were most effective for removal of heavy metals from the growth medium. The results revealed that heavy metal resistant genes may be located on plasmid DNA. Furthermore, molecular identification demonstrated that MKH3 was similar to Enterobacterhormaechei with 98% homology. Conclusion: Bacterium isolated from a contaminated site showed the ability to remove a high amount of lead and copper. Thus, MKH3 could be useful for the bioremediation of heavy metals, particularly lead and copper, from industrial wastewater and contaminated sites.

  11. Analysis of FT-IR spectra of dicyclopentadienyl (bis-substituted cyclopentadienyl) dithiocyano of titanium, zirconium and hafnium.

    Science.gov (United States)

    Zhang, Jianbo; Ye, Peng; Zong, Yueru; Xu, Zhenhua; Chen, Shoushan

    2007-07-01

    The FT-IR spectra of 18 (R-Cp)2M(NCS)2 were measured. The M-Cp, M-NCS (M=Ti, Zr, Hf) and other vibration modes were reasonably assigned. All complexes of (R-Cp)2M(NCS)2 determined in this paper are bonded by N-M, and the absorption of upsilon(s)(M-Cp)(A1) (M=Ti, Zr and Hf) vibration all appear in 365 cm(-1) or so, while upsilon(as)(M-Cp)(B) appear successively around 420, 350 and 320 cm(-1) in order of Ti, Zr and Hf. The influence of the center metal atoms and the substituents on cyclopentadienyl upon the spectra was discussed. It is mainly in far infrared region that center metal atoms influence upon the infrared spectra. The influence of the substituents to cyclopentadienyling upon its vibration is not significant. Only between 1500 and 1480 cm(-1) did a new absorbing peak appear due to the introduction of substituents to activate upsilon(CC) vibration.

  12. Improved Extended Multiplicative Scatter Correction Algorithm Applied in Blood Glucose Noninvasive Measurement with FT-IR Spectroscopy

    Directory of Open Access Journals (Sweden)

    Qingbo Li

    2013-01-01

    Full Text Available In order to improve the predictive accuracy of human blood glucose quantitative analysis model with fourier transform infrared (FT-IR spectroscopy, this paper uses a method named improved extended multiplicative scatter correction (Im-EMSC, which can effectively eliminate the scattering effects caused by human body strong scattering. The principal components of the differential spectra are used instead of the pure spectra of the analytes in this algorithm. Calibrate the unwanted physical characteristic through the shape of the curve of principal components, and extract the original glucose concentration information. Im-EMSC can efficiently remove most of the pathlength difference and baseline shift influences. Firstly, Im-EMSC is used as a preprocessing method, and then partial least squares (PLS regression method is adopted to establish a quantitative analysis model. In this paper, the result of Im-EMSC is compared with those popular scattering correction algorithms of multiplicative scatter correction (MSC and extended multiplicative scatter correction (EMSC preprocessing methods. Experimental results show that the prediction accuracy has been greatly improved with Im-EMSC method, which is helpful for human noninvasive glucose concentration detection technology.

  13. Evaluation of Salmon Adhesion on PET-Metal Interface by ATR, FT-IR, and Raman Spectroscopy

    Directory of Open Access Journals (Sweden)

    E. Zumelzu

    2015-01-01

    Full Text Available The material employed in this study is an ecoefficient, environmentally friendly, chromium (VI-free (noncarcinogenic metal polymer. The originality of the research lies in the study of the effect of new production procedures of salmon on metal packaging with multilayer polyethylene terephthalate (PET polymer coatings. Our hypothesis states that the adhesion of postmortem salmon muscles to the PET polymer coating produces surface and structural changes that affect the functionality and limit the useful life of metal containers, compromising therefore their recycling capacity as ecomaterials. This work is focused on studying the effects of the biochemical changes of postmortem salmon on the PET coating and how muscle degradation favors adhesion to the container. The experimental design considered a series of laboratory tests of containers simulating the conditions of canned salmon, chemical and physical tests of food-contact canning to evaluate the adhesion, and characterization of changes in the multilayer PET polymer by electron microscopy, ATR, FT-IR, and Raman spectroscopy analyses. The analyses determined the effect of heat treatment of containers on the loss of freshness of canned fish and the increased adhesion to the container wall, and the limited capability of the urea treatment to remove salmon muscle from the container for recycling purposes.

  14. Single Cell Synchrotron FT-IR Microspectroscopy Reveals a Link between Neutral Lipid and Storage Carbohydrate Fluxes in S. cerevisiae

    Science.gov (United States)

    Jamme, Frédéric; Vindigni, Jean-David; Méchin, Valérie; Cherifi, Tamazight; Chardot, Thierry; Froissard, Marine

    2013-01-01

    In most organisms, storage lipids are packaged into specialized structures called lipid droplets. These contain a core of neutral lipids surrounded by a monolayer of phospholipids, and various proteins which vary depending on the species. Hydrophobic structural proteins stabilize the interface between the lipid core and aqueous cellular environment (perilipin family of proteins, apolipoproteins, oleosins). We developed a genetic approach using heterologous expression in Saccharomyces cerevisiae of the Arabidopsis thaliana lipid droplet oleosin and caleosin proteins AtOle1 and AtClo1. These transformed yeasts overaccumulate lipid droplets, leading to a specific increase in storage lipids. The phenotype of these cells was explored using synchrotron FT-IR microspectroscopy to investigate the dynamics of lipid storage and cellular carbon fluxes reflected as changes in spectral fingerprints. Multivariate statistical analysis of the data showed a clear effect on storage carbohydrates and more specifically, a decrease in glycogen in our modified strains. These observations were confirmed by biochemical quantification of the storage carbohydrates glycogen and trehalose. Our results demonstrate that neutral lipid and storage carbohydrate fluxes are tightly connected and co-regulated. PMID:24040242

  15. The retrogradation properties of glutinous rice and buckwheat starches as observed with FT-IR, 13C NMR and DSC.

    Science.gov (United States)

    Lian, Xijun; Wang, Changjun; Zhang, Kunsheng; Li, Lin

    2014-03-01

    The experiment was conducted to study the retrogradation properties of glutinous rice and buckwheat starch with wavelengths of maximum absorbance, FT-IR, (13)C NMR, and DSC. The results show that the starches in retrograded glutinous rice starch and glutinous rice amylopectin could not form double helix. The IR results show that protein inhabits in glutinous rice and maize starches in a different way and appearance of C-H symmetric stretching vibration at 2852 cm(-1) in starch might be appearance of protein. Retrogradation untied the protein in glutinous amylopectin. Enthalpies of sweet potato and maize granules are higher than those of their retrograded starches. The (13)C NMR results show that retrogradation of those two starches leads to presence of β-anomers and retrogradation might decompose lipids in glutinous rice amylopectin into small molecules. Glutinous rice starch was more inclined to retrogradation than buckwheat starch. The DSC results show that the second peak temperatures for retrograded glutinous rice and buckwheat starches should be assigned to protein. The SEM results show that an obvious layer structure exists in retrograded glutinous rice amylopectin.

  16. Rapid discrimination of Panax notogeinseng of different grades by FT-IR and 2DCOS-IR

    Science.gov (United States)

    Ma, Fang; Chen, Jian-bo; Wu, Xian-xue; Zhou, Qun; Sun, Su-qin

    2016-11-01

    The herbal material of Notoginseng (the root of Panax notoginseng) is sold by "Tou" (the number of Notoginseng in every 500 g) to distinguish the grade. Normally the better quality, the few number of the "Tou" and the size of Notoginseng is bigger. In this study, three grades of Notoginseng harvested from Yunnan province were discriminated and identified by Fourier transform infrared spectroscopy (FT-IR) and two-dimensional correlation infrared spectroscopy (2DCOS-IR)). The correlation coefficient of IR spectra between the three grades of Notoginseng and starch are greater than 0.95 in the range of 1300-800 cm-1, means the main compositions of Notoginseng are starch polysaccharide. Also, when the size of Notoginseng is bigger, it may contain more polysaccharide. There is no difference in range of 815-1000 cm-1 of the 2DCOS-IR synchronous spectra of the three grades means polysaccharides possess good thermal stability. In the range of 1200-1300 cm-1 shows the inverse ration between the thermal sensitivity of C-O and the number of "Tou". Combination with the 2DCOS-IR asynchronous spectra, the response speed of amino acid (1640 cm-1) on the thermal perturbation is the fastest, followed by nitrate (1384 cm-1); the response speed of polysaccharides (1079 cm-1) is the slowest. The result proved that the 2DCOS-IR could discriminate different grades of Notoginseng.

  17. FT-IR and DSC studies of poly(vinylidene chloride-co-acrylonitrile) complexed with LiBF4

    Science.gov (United States)

    Shanthi, M.; Mathew, Chithra M.; Ulaganathan, M.; Rajendran, S.

    2013-05-01

    Poly(vinylidene chloride-co-acrylonitrile) (PVdC-co-AN) based solvent free electrolytes were prepared for different compositions of PVdC-co-AN and LiBF4 using solution casting technique. The ionic conductivity, thermal behavior, complexation and structure of polymer electrolytes have been investigated as a function of LiBF4 content at different weight ratios. DSC studies revealed that the glass transition temperature Tg decreases with the increase of salt concentration up to an optimum level. The change in the glass transition temperature (Tg) with respect to the LiBF4 concentration is reflected in the bulk resistance of the electrolytes and the sample containing 6 wt.% of LiBF4 exhibited minimum bulk resistance compared to other samples. FT-IR studies confirm the interaction of polymer and salt which is mainly between Li-cation and nitrogen atom of Ctbnd N group. The crystalline phase of polymer host is completely changed on the addition of Li salt.

  18. FT-IR spectroscopic investigation of ionic interactions in PPG 4000: AgCF3SO3 polymer electrolyte.

    Science.gov (United States)

    Suthanthiraraj, S Austin; Kumar, R; Paul, B Joseph

    2009-01-01

    The effect of salt concentration on the ubiquitous ionic interactions observed in the case of the silver ion conducting polymer electrolyte system poly(propylene glycol) (PPG)-silver triflate has been investigated using Fourier transform infrared (FT-IR) spectroscopy as a probe for the characterization of the local environment of the triflate ion in PPG-based polymer electrolytes. The maximum free anion concentrations of symmetric and asymmetric SO(3) stretching modes in the case of poly(propylene glycol) complexed with silver triflate (AgCF(3)SO(3)) corresponding to the ether oxygen metal cation ratios from 2:1 to 6:1 have been investigated in detail. The present Fourier transform infrared spectral studies of the C-O-C stretching mode have shown reduction in the intensity, due to the decrease of salt concentration. The splitting of vibrational modes has been analyzed in terms of free ions, ion pairs and aggregates. The bands of SO(3) symmetric stretching mode appearing at 1032 and 1038 cm(-1) in the chosen polymer electrolyte material have been assigned to free ions and ion pairs respectively.

  19. FT-IR study of the effect of zinc exposure on the biochemical contents of the muscle of Labeo rohita

    Science.gov (United States)

    Palaniappan, PL. RM.; Renju, V. B.

    2009-01-01

    Heavy metal pollution is a major environmental problem in the modern world due to increasing human activities. Zinc is an essential element involved in a wide variety of cellular processes. However, it becomes toxic when elevated concentrations are introduced into the environment. The goal of the present study is to investigate the effect of zinc exposure on the biochemical contents of the muscle tissues of freshwater species Labeo rohita using Fourier transform infrared (FT-IR) spectroscopy. Since the muscle constitutes the greatest mass of the fish that is consumed, the present study has paid particular attention to muscle component. The result reveals that the zinc exposure causes significant changes in the biochemical contents of the L. rohita muscle tissues. In addition, it causes an alteration in the protein secondary structures by decreasing the α-helix and increasing the β-sheet contents of muscle tissues. Further, it has been observed that the administration of chelating agent D-penicillamine improves the protein and lipid contents in the muscle tissues compared to zinc exposed tissues. This result shows that D-penicillamine is the effective chelator of zinc in reducing the body burden of L. rohita fingerlings.

  20. Optical Determination of Lead Chrome Green in Green Tea by Fourier Transform Infrared (FT-IR) Transmission Spectroscopy

    Science.gov (United States)

    Li, Xiaoli; Xu, Kaiwen; Zhang, Yuying; Sun, Chanjun; He, Yong

    2017-01-01

    The potential of Fourier transform infrared (FT-IR) transmission spectroscopy for determination of lead chrome green in green tea was investigated based on chemometric methods. Firstly, the qualitative analysis of lead chrome green in tea was performed based on partial least squares discriminant analysis (PLS-DA), and the correct rate of classification was 100%. And then, a hybrid method of interval partial least squares (iPLS) regression and successive projections algorithm (SPA) was proposed to select characteristic wavenumbers for the quantitative analysis of lead chrome green in green tea, and 19 wavenumbers were obtained finally. Among these wavenumbers, 1384 (C = C), 1456, 1438, 1419(C = N), and 1506 (CNH) cm-1 were the characteristic wavenumbers of lead chrome green. Then, these 19 wavenumbers were used to build determination models. The best model was achieved by least squares support vector machine (LS-SVM)algorithm with high coefficient of determination and low root-mean square error of prediction set (R2p = 0.864 and RMSEP = 0.291). All these results indicated the feasibility of IR spectra for detecting lead chrome green in green tea. PMID:28068348

  1. FT-IR reflection spectra of single crystals: resolving phonons of different symmetry without using polarised radiation

    Directory of Open Access Journals (Sweden)

    METODIJA NAJDOSKI

    2000-07-01

    Full Text Available Fourier-transform infrared (FT-IR reflection spectra, asquired at nearnormal incidence, were recorded from single crystals belonging to six crystal systems: CsCr(SO42.12H2O (alum, cubic, K2CuCl2·2H2O (Mitscherlichite, tetragonal, CaCO3 (calcite, hexagonal, KHSO4 (mercallite, orthorhombic, CaSO4·2H2O (gypsum, monoclinic and CuSO4·5H2O (chalcantite, triclinic. The acquired IR reflection spectra were further transformed into absorption spectra, employing the Kramers-Kronig transformation. Except for the cubic alums, the spectra strongly depend on the crystal face from which they were recorded; this is a consequence of anisotropy. Phonons of a given symmetry (E-species, in tetragonal/hexagonal and B-species, in monoclinic crystals may be resolved without using a polariser. The spectrum may be simplified in the case of an orthorhombic crystal, as well. The longitudinal-optical (LO and transversal-optical (TO mode frequencies were calculated in the case of optically isotropic and the simplified spectra of optically uniaxial crystals.

  2. Midinfrared FT-IR as a Tool for Monitoring Herbaceous Biomass Composition and Its Conversion to Furfural

    Directory of Open Access Journals (Sweden)

    Anna Maria Raspolli Galletti

    2015-01-01

    Full Text Available A semiquantitative analysis by means of midinfrared FT-IR spectroscopy was tuned for the simultaneous determination of cellulose, hemicellulose, and lignin in industrial crops such as giant reed (Arundo donax L. and switchgrass (Panicum virgatum L.. Ternary mixtures of pure cellulose, hemicellulose, and lignin were prepared and a direct correlation area/concentration was achieved for cellulose and lignin, whereas indirect correlations were found for hemicellulose quantification. Good correspondences between the values derived from our model and those reported in the literature or obtained according to the official Van Soest method were ascertained. Average contents of 40–45% of cellulose, 20–25% of hemicellulose, and 20–25% of lignin were obtained for different samples of giant reed species. In the case of switchgrass, a content of 36% of cellulose, 28% of hemicellulose, and 26% of lignin was achieved. This analysis was also carried out on giant reed and switchgrass residues after a mild hydrolysis step carried out with dilute hydrochloric acid for the production of furfural with good yield. Reasonable compositional data were obtained, thus allowing an indirect monitoring which helps the optimization of the hydrothermal pretreatment for furfural production from hemicellulose fractions.

  3. Classification of the degenerative grade of lesions of supraspinatus rotator cuff tendons by FT-Raman spectroscopy

    Science.gov (United States)

    Palma Fogazza, Bianca; da Silva Carvalho, Carolina; Godoy Penteado, Sergio; Meneses, Cláudio S.; Abrahão Martin, Airton; da Silva Martinho, Herculano

    2007-02-01

    FT-Raman spectroscopy was employed to access the biochemical alterations occurring on the degenerative process of the rotator cuff supraspinatus tendons. The spectral characteristic variations in the 351 spectra of samples of 39 patients were identified with the help of Principal Components Analysis. The main variations occurred in the 840-911; 1022- 1218; 1257; 1270; 1300; 1452; 1663; and 1751 cm -1 regions corresponding to the vibrational bands of proline, hydroxiproline, lipids, nucleic acids, carbohydrates, collagen, and elastin. These alterations are compatible with the pathology alterations reported on the literature. Scattering plots of PC 4 vs PC 2 and PC 3 vs PC 2 contrasted with histopathological analysis has enabled the spectral classification of the data into normal and degenerated groups of tendons. By depicting empiric lines the estimated sensibility and specificity were 39,6 % and 97,8 %, respectively for PC 4 vs PC 2 and 36,0 % and 100 %, respectively for PC 3 vs PC 2. These results indicate that Raman spectroscopy can be used to probe the general tendon quality and could be applied as co adjuvant element in the usual arthroscopy surgery apparatus to guide the procedure and possibly infer about the probability of rerupture.

  4. Quantum chemical calculations and analysis of FTIR, FT-Raman and UV-Vis spectra of temozolomide molecule

    Science.gov (United States)

    Bhat, Sheeraz Ahmad; Ahmad, Shabbir

    2015-11-01

    A combined experimental and theoretical study of the structure, vibrational and electronic spectra of temozolomide molecule, which is largely used in the treatment of brain tumours, is presented. FTIR (4000-400 cm-1) and FT-Raman spectra (4000‒50 cm-1) have been recorded and analysed using anharmonic frequency calculations using VPT2, VSCF and CC-VSCF levels of theory within B3LYP/6-311++G(d,p) framework. Anharmonic methods give accurate frequencies of fundamental modes, overtones as well as Fermi resonances and account for coupling of different modes. The anharmonic frequencies calculated using VPT2 and CC-VSCF methods show better agreement with the experimental data. Harmonic frequencies including solvent effects are also computed using IEF-PCM model. The magnitudes of coupling between pair of modes have been calculated using coupling integral based on 2MR-QFF approximation. Intermolecular interactions are discussed for three possible dimers of temozolomide. UV-Vis spectrum, examined in ethanol solvent, is compared with the calculated spectrum at TD-DFT/6-311++G(d,p) level of theory. The electronic properties, such as excitation energy, frontier molecular orbital energies and the assignments of the absorption bands are also discussed.

  5. Investigation of Catalytic NO{sub x}, reduction with transient techniques, isotopic exchange and FT-IR spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Rahkamaa-Tolonen, K.

    2001-07-01

    Emissions from vehicles are suppressed by catalytic conversion, i.e. total oxidation of carbon monoxide and hydrocarbons and reduction of nitrogen oxides. The on-going demand for lower emissions requires more detailed knowledge about the catalytic reaction mechanisms and kinetics on the level of elementary steps, especially because of the mutual interactions in the complex reaction mixture. The reaction mechanisms for the abatement of nitrogen oxides (NO{sub x}) are of particular interest, since they are environmentally very unfriendly compounds. Transient experimental techniques can be used as a tool to understand the reaction mechanisms and to develop mathematical models allowing simulation and optimisation of the behaviour of three-way catalyst converters. In chemical kinetics, isotope-labelled reactants are frequently employed to follow reaction pathways and to determine reaction mechanisms. The kinetics and mechanisms of the catalytic reduction of nitrogen oxide (NO) by hydrogen as well as self-decomposition of NO and N{sub 2}O were studied over alumina based palladium and rhodium-alumina monoliths. In addition, NO reduction with H{sub 2} and D{sub 2}, isotope exchange of hydrogen atoms in water, ammonia and hydrogen with deuterium, as well as adsorption of ammonia and water on the Pd-monolith were studied with transient experiments. Transient step-response experiments, isotopic jumping techniques, steady- state isotopic-transient analysis, temperature programmed desorption (TPD) and Fourier-transformed infrared spectroscopy (FT-IR) were used as experimental techniques. The catalysts were characterised by carbon monoxide chemisorption, nitrogen physisorption and X-ray photoelectron spectroscopy (XPS). Nitrogen, nitrous oxide, ammonia, and water were detected as reaction products in NO reduction by hydrogen. The transient and FT-IR experiments yielded information about the surface reaction mechanisms. The dissociation of NO on the catalyst surface is the

  6. Thermoluminescence, optical absorption, photoluminescence, FT-IR and XRD studies on L-arginine doped orthophosphoric acid

    Energy Technology Data Exchange (ETDEWEB)

    Saradha, K. [Department of Physics, Selvamm Arts and Science College, Namakkal-637002, TN (India); Bangaru, S., E-mail: ssbangaru@yahoo.co.in [Department of Physics, Arignar Anna Government Arts College, Namakkal-637002, TN (India); Muralidharan, G. [Department of Physics, Gandhigram Rural University, Gandhigram-624302, TN (India)

    2013-10-15

    A paper report on the thermoluminescence (TL) optical absorption, photoluminescence (PL), single crystal XRD studies on L-arginine doped orthophosphoric acid confirm that a crystal belongs to the orthorhombic system with space group p2{sub 1}2{sub 1}2{sub 1}. The lattice of most of these crystals forming the composite, in spite of whatever the phase it belongs to, it is spatially coherent to each other with in the crystalline bulk. The functional groups present in the crystal confirms that using FT-IR technique optical absorbance shows meagre absorption from the entire visible region. The TL glow curve of L-arginine doped orthophosphoric acid sample marked a prominent peak at 125, 254 and 303 °C along with small peak at around 218 °C. Correlation with changes in optical absorption suggest that a peak at 125 °C to be related to process involving Z{sub 1} center. The peak follows first order kinetics with an activation energy of 0.033 eV and a frequency factor of 7.45×10{sup 2} and FWHM 61 nm. -- Highlights: • L-Arginine doped orthophosphoric acid has not been adequately studied. • A defect centre formed in L-arginine doped orthophosphoric acid system is assigned to F and Z{sub 1} centres. • The glow peaks are found to obey first order kinetics. • The Lattice parameter a=10.89 Å, b=7.91 Å, C=7.34 Å are in good agreement with the reported values. • The formation of a characteristic F- and centered at 520 nm is found. Such a detailed study and obtained results.

  7. High-throughput thermal stability analysis of a monoclonal antibody by attenuated total reflection FT-IR spectroscopic imaging.

    Science.gov (United States)

    Boulet-Audet, Maxime; Byrne, Bernadette; Kazarian, Sergei G

    2014-10-07

    The use of biotherapeutics, such as monoclonal antibodies, has markedly increased in recent years. It is thus essential that biotherapeutic production pipelines are as efficient as possible. For the production process, one of the major concerns is the propensity of a biotherapeutic antibody to aggregate. In addition to reducing bioactive material recovery, protein aggregation can have major effects on drug potency and cause highly undesirable immunological effects. It is thus essential to identify processing conditions which maximize recovery while avoiding aggregation. Heat resistance is a proxy for long-term aggregation propensity. Thermal stability assays are routinely performed using various spectroscopic and scattering detection methods. Here, we evaluated the potential of macro attenuated total reflection Fourier transform infrared (ATR-FT-IR) spectroscopic imaging as a novel method for the high-throughput thermal stability assay of a monoclonal antibody. This chemically specific visualization method has the distinct advantage of being able to discriminate between monomeric and aggregated protein. Attenuated total reflection is particularly suitable for selectively probing the bottom of vessels, where precipitated aggregates accumulate. With focal plane array detection, we tested 12 different buffer conditions simultaneously to assess the effect of pH and ionic strength on protein thermal stability. Applying the Finke model to our imaging kinetics allowed us to determine the rate constants of nucleation and autocatalytic growth. This analysis demonstrated the greater stability of our immunoglobulin at higher pH and moderate ionic strength, revealing the key role of electrostatic interactions. The high-throughput approach presented here has significant potential for analyzing the stability of biotherapeutics as well as any other biological molecules prone to aggregation.

  8. Study on antibacterial alginate-stabilized copper nanoparticles by FT-IR and 2D-IR correlation spectroscopy

    Science.gov (United States)

    Díaz-Visurraga, Judith; Daza, Carla; Pozo, Claudio; Becerra, Abraham; von Plessing, Carlos; García, Apolinaria

    2012-01-01

    Background The objective of this study was to clarify the intermolecular interaction between antibacterial copper nanoparticles (Cu NPs) and sodium alginate (NaAlg) by Fourier transform infrared spectroscopy (FT-IR) and to process the spectra applying two-dimensional infrared (2D-IR) correlation analysis. To our knowledge, the addition of NaAlg as a stabilizer of copper nanoparticles has not been previously reported. It is expected that the obtained results will provide valuable additional information on: (1) the influence of reducing agent ratio on the formation of copper nanoparticles in order to design functional nanomaterials with increased antibacterial activity, and (2) structural changes related to the incorporation of Cu NPs into the polymer matrix. Methods Cu NPs were prepared by microwave heating using ascorbic acid as reducing agent and NaAlg as stabilizing agent. The characterization of synthesized Cu NPs by ultraviolet visible spectroscopy, transmission electron microscopy (TEM), electron diffraction analysis, X-ray diffraction (XRD), and semiquantitative analysis of the weight percentage composition indicated that the average particle sizes of Cu NPs are about 3–10 nm, they are spherical in shape, and consist of zerovalent Cu and Cu2O. Also, crystallite size and relative particle size of stabilized Cu NPs were calculated by XRD using Scherrer’s formula and FT from the X-ray diffraction data. Thermogravimetric analysis, differential thermal analysis, differential scanning calorimetry (DSC), FT-IR, second-derivative spectra, and 2D-IR correlation analysis were applied to studying the stabilization mechanism of Cu NPs by NaAlg molecules. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of stabilized Cu NPs against five bacterial strains (Staphylococccus aureus ATCC 6538P, Escherichia coli ATCC 25922 and O157: H7, and Salmonella enterica serovar Typhimurium ATCC 13311 and 14028) were evaluated with macrodilution

  9. Study on antibacterial alginate-stabilized copper nanoparticles by FT-IR and 2D-IR correlation spectroscopy

    Directory of Open Access Journals (Sweden)

    Díaz-Visurraga J

    2012-07-01

    Full Text Available Judith Díaz-Visurraga,1,2 Carla Daza,2 Claudio Pozo,2 Abraham Becerra,2 Carlos von Plessing,1,2 Apolinaria García31Department of Pharmacy, Faculty of Pharmacy, University of Concepcion; 2Research Center of Advanced Polymers (CIPA, CONICYT REGIONAL/CIPA R08C1002; 3Department of Microbiology, Faculty of Biological Sciences, University of Concepcion, Concepción, ChileBackground: The objective of this study was to clarify the intermolecular interaction between antibacterial copper nanoparticles (Cu NPs and sodium alginate (NaAlg by Fourier transform infrared spectroscopy (FT-IR and to process the spectra applying two-dimensional infrared (2D-IR correlation analysis. To our knowledge, the addition of NaAlg as a stabilizer of copper nanoparticles has not been previously reported. It is expected that the obtained results will provide valuable additional information on: (1 the influence of reducing agent ratio on the formation of copper nanoparticles in order to design functional nanomaterials with increased antibacterial activity, and (2 structural changes related to the incorporation of Cu NPs into the polymer matrix.Methods: Cu NPs were prepared by microwave heating using ascorbic acid as reducing agent and NaAlg as stabilizing agent. The characterization of synthesized Cu NPs by ultraviolet visible spectroscopy, transmission electron microscopy (TEM, electron diffraction analysis, X-ray diffraction (XRD, and semiquantitative analysis of the weight percentage composition indicated that the average particle sizes of Cu NPs are about 3–10 nm, they are spherical in shape, and consist of zerovalent Cu and Cu2O. Also, crystallite size and relative particle size of stabilized Cu NPs were calculated by XRD using Scherrer’s formula and FT from the X-ray diffraction data. Thermogravimetric analysis, differential thermal analysis, differential scanning calorimetry (DSC, FT-IR, second-derivative spectra, and 2D-IR correlation analysis were applied to

  10. In-Situ FT-IR Investigation of Partial Oxidation of Methane to Syngas over Rh/SiO2 Catalyst

    Institute of Scientific and Technical Information of China (English)

    Tinghua Wu; Dongmin Lin; Ying Wu; Xiaoping Zhou; Qiangu Yan; Weizheng Weng; Huilin Wan

    2007-01-01

    Partial oxidation of methane to syngas(POM)over Rh/SiO2 catalyst was investigated using in-situ FT-IR.when methane interacted with 1.0wt%Rh/SiO2 catalyst,it was dissociated to adsorbed hydrogen and CHx species.The adsorbed hydrogen atoms were transferred to SiO2 surface by "spill-over" and reacted with lattice oxygen to form surface-OH species.POM mechanism was investigated over Rh/SiO2 catalyst using in-situ FT-IR.It Was found that CO2 Was formed before CO could be detected when CH4 and O2 were introduced over the preoxidized Rh/SiO2 catalyst,whereas CO Was detected before CO2 Was formed over the prereduced Rh/SiO2 catalyst.

  11. Simultaneous monitoring of curing shrinkage and degree of cure of thermosets by attenuated total reflection Fourier transform infrared (ATR FT-IR) spectroscopy.

    Science.gov (United States)

    Fernàndez-Francos, Xavier; Kazarian, Sergei G; Ramis, Xavier; Serra, Àngels

    2013-12-01

    We present a novel methodology to simultaneously monitor of the degree of cure and curing shrinkage of thermosetting formulations. This methodology is based on the observation of changes in the infrared absorption of reactive functional groups and the groups used as a standard reference for normalization. While the optical path length is exact and controlled in transmission infrared spectroscopy, in attenuated total reflection Fourier transform infrared (ATR FT-IR), the exact determination of volume changes requires the measurement of the refractive indices of the studied system throughout the curing process or at least an indirect parallel measurement of this property. The methodology presented here allows one to achieve quantitative measurements of the degree of cure and shrinkage for thermosets using in situ ATR FT-IR spectroscopy.

  12. An investigation of the effect of silicone oil on polymer intraocular lenses by means of PALS, FT-IR and Raman spectroscopies

    Science.gov (United States)

    Chamerski, Kordian; Lesniak, Magdalena; Sitarz, Maciej; Stopa, Marcin; Filipecki, Jacek

    2016-10-01

    The effect of the polydimethylsiloxane (PDMS) based silicone oil, that is widely used in vitreoretinal surgery, on internal structures of the polymer intraocular lenses was investigated. The effect of PDMS was studied on the polymethyl methacrylate (PMMA) rigid lenses and poly(2-hydroxyethyl methacrylate) (PHEMA) flexible lenses. The research was carried out by means of the positron lifetime spectroscopy (PALS) as well as the infrared spectroscopy (FT-IR) and the Raman spectroscopy (RS). The studies involving the use of PALS and FT-IR methods have revealed that the PHEMA based lenses absorbed, whereas the PMMA lenses did not absorb, silicone oil. The results obtained with the use of the RS method were inconclusive, probably due to the too low intensity of the characteristic PDMS bands. The evidence from this study was discussed in terms of physics and related to the clinical use of both silicone oil and intraocular lenses.

  13. In situ FT-IR spectroscopy investigations of carbon nanotubes supported Co-Mo catalysts for selective hydrodesulfurization of FCC gasoline

    Institute of Scientific and Technical Information of China (English)

    Jingcheng Zhang; Wenkun Yin; Hongyan Shang; Chenguang Liu

    2008-01-01

    To better understand the nature of carbon nanotubes supported Co-Mo catalysts (Co-Mo/CNTs) for selective hy-drodesulfurization (HDS) of fluid catalytic cracking (FCC) gasoline, studies are carried out using in situ Fourier transform infrared spectroscopy (FT-IR). The catalytic performances of Co-Mo/CNTs catalysts were evaluated with a mixture of cy-clohexane, diisobutylene, cyclohexene, 1-octene (60 : 30 : 5 : 5, volume ratio) and thiophene (0.5%, ratio of total weight) as model compounds to simulate FCC gasoline. The HDS experimental results suggested that the HDS activity and selectivity of Co-Mo/CNTs catalysts were affected by Co/Mo ratio; the optimal Co/Mo atomic ratio is about 0.4, and the optimum reaction temperature is 260 ℃. The in situ FT-IR studies revealed that 1-octene can be completely saturated at 200 ℃. In the FT-IR spectra of diisobutylene, the characteristic absorption peak around 3081 cm-1 for the stretching vibration peak of=C-H bond was still clear at 320℃, indicating that diisobutylene is difficult to be hydrogenated. As for the thiophene, no characteristic absorption peak could be found around 3092 cm-1 and 835 cm-1 when the reaction temperature was raised to 280 ℃, indi-cating that thiophene had been completely hydrodesulfurized. On the basis of FT-IR results, it can be deduced that thiopbene HDS reaction occurred mainly through direct hydrogenolysis route, whereas thiophene HDS and diisobutylene hydrogenation reaction over Co-Mo/CNTs catalysts might occur on two different kinds of active sites.

  14. FT-IR Spectroscopic characterization of the intermediates in the selective catalytic reduction of NO with methane on Pd/ZrO(formula)-WO(formula) catalyst

    OpenAIRE

    Çayırtepe, İlknur

    2004-01-01

    Cataloged from PDF version of article. This work involves in situ FT-IR spectroscopic study of the routes of formation, composition and thermal stability of strongly bound NOx complexes on the surface of Pd/tungstated zirconia, and transformation of the surface NOx complexes in the presence of methane in order to elucidate the mechanism of selective catalytic reduction of NO with methane. Sol-gel polymer-template synthesis was chosen to obtain high surface area in the prepar...

  15. Técnicas FT-IR (PAS, UATR e Objetiva ATR Aplicadas à Caracterização de EPDM Modificada com Plasma

    Directory of Open Access Journals (Sweden)

    Renata Patrícia dos Santos

    2014-06-01

    Full Text Available Técnicas FT-IR (UATR, PAS e MIC, com objetiva ATR foram escolhidas para a caracterização da superfície da borracha de EPDM vulcanizada, após tratamento em plasma de Ar/O2 e N2/H2/Ar gerado em micro-ondas. Após tratamento, grupos oxigenados foram detectados por UATR e MIC/FT-IR, com objetiva ATR para as duas misturas gasosas, e possíveis grupos nitrogenados foram inseridos na superfície das amostras tratadas com plasma de N2/H2/Ar. A análise MIC/FT-IR sugeriu a formação de grupos em uma camada mais externa, para as amostras tratadas com plasma de N2/H2/Ar, sendo possível observar a redução na intensidade das bandas da absorção do CH2 e CH3, o que pode estar relacionado ao fato de o nitrogênio ser um gás menos permeável que o oxigênio. Diferentes velocidades, 0,05 cm.s-1 e 0,2 cm.s-1, foram utilizadas na análise PAS para avaliar a superfície após tratamento, e apenas para a velocidade 0,05 cm.s-1 com plasma de Ar/O2 alterações espectroscópicas foram detectadas. A redução na medida de ângulo de contato e o aumento na resistência ao descascamento da colagem indicaram melhoras nas propriedades adesivas da superfície. Falhas de adesão foram observadas entre a interface do filme de adesivo de PU e da borracha de EPDM, e confirmados por UATR/FT-IR.

  16. Chemical profiling and adulteration screening of Aquilariae Lignum Resinatum by Fourier transform infrared (FT-IR) spectroscopy and two-dimensional correlation infrared (2D-IR) spectroscopy.

    Science.gov (United States)

    Qu, Lei; Chen, Jian-Bo; Zhang, Gui-Jun; Sun, Su-Qin; Zheng, Jing

    2017-03-05

    As a kind of expensive perfume and valuable herb, Aquilariae Lignum Resinatum (ALR) is often adulterated for economic motivations. In this research, Fourier transform infrared (FT-IR) spectroscopy is employed to establish a simple and quick method for the adulteration screening of ALR. First, the principal chemical constituents of ALR are characterized by FT-IR spectroscopy at room temperature and two-dimensional correlation infrared (2D-IR) spectroscopy with thermal perturbation. Besides the common cellulose and lignin compounds, a certain amount of resin is the characteristic constituent of ALR. Synchronous and asynchronous 2D-IR spectra indicate that the resin (an unstable secondary metabolite) is more sensitive than cellulose and lignin (stable structural constituents) to the thermal perturbation. Using a certified ALR sample as the reference, the infrared spectral correlation threshold is determined by 30 authentic samples and 6 adulterated samples. The spectral correlation coefficient of an authentic ALR sample to the standard reference should be not less than 0.9886 (p=0.01). Three commercial adulterated ALR samples are identified by the correlation threshold. Further interpretation of the infrared spectra of the adulterated samples indicates the common adulterating methods - counterfeiting with other kind of wood, adding ingredient such as sand to increase the weight, and adding the cheap resin such as rosin to increase the content of resin compounds. Results of this research prove that FT-IR spectroscopy can be used as a simple and accurate quality control method of ALR.

  17. Combining Raman and FT-IR spectroscopy with quantitative isotopic labeling for differentiation of E. coli cells at community and single cell levels.

    Science.gov (United States)

    Muhamadali, Howbeer; Chisanga, Malama; Subaihi, Abdu; Goodacre, Royston

    2015-04-21

    There is no doubt that the contribution of microbially mediated bioprocesses toward maintenance of life on earth is vital. However, understanding these microbes in situ is currently a bottleneck, as most methods require culturing these microorganisms to suitable biomass levels so that their phenotype can be measured. The development of new culture-independent strategies such as stable isotope probing (SIP) coupled with molecular biology has been a breakthrough toward linking gene to function, while circumventing in vitro culturing. In this study, for the first time we have combined Raman spectroscopy and Fourier transform infrared (FT-IR) spectroscopy, as metabolic fingerprinting approaches, with SIP to demonstrate the quantitative labeling and differentiation of Escherichia coli cells. E. coli cells were grown in minimal medium with fixed final concentrations of carbon and nitrogen supply, but with different ratios and combinations of (13)C/(12)C glucose and (15)N/(14)N ammonium chloride, as the sole carbon and nitrogen sources, respectively. The cells were collected at stationary phase and examined by Raman and FT-IR spectroscopies. The multivariate analysis investigation of FT-IR and Raman data illustrated unique clustering patterns resulting from specific spectral shifts upon the incorporation of different isotopes, which were directly correlated with the ratio of the isotopically labeled content of the medium. Multivariate analysis results of single-cell Raman spectra followed the same trend, exhibiting a separation between E. coli cells labeled with different isotopes and multiple isotope levels of C and N.

  18. Detection Limits for Blood on Fabrics Using Attenuated Total Reflection Fourier Transform Infrared (ATR FT-IR) Spectroscopy and Derivative Processing.

    Science.gov (United States)

    Lu, Zhenyu; DeJong, Stephanie A; Cassidy, Brianna M; Belliveau, Raymond G; Myrick, Michael L; Morgan, Stephen L

    2016-06-27

    Attenuated total reflection Fourier transform infrared spectroscopy (ATR FT-IR) was used to detect blood stains based on signature protein absorption in the mid-IR region, where intensity changes in the spectrum can be related to blood concentration. Partial least squares regression (PLSR) was applied for multivariate calibrations of IR spectra of blood dilutions on four types of fabric (acrylic, nylon, polyester, and cotton). Gap derivatives (GDs) were applied as a preprocessing technique to optimize the performance of calibration models. We report a much improved IR detection limit (DL) for blood on cotton (2700× in dilution factor units) and the first IR DL reported for blood on nylon (250×). Due to sample heterogeneity caused by fabric hydrophobicity, acrylic fabric produced variable ATR FT-IR spectra that caused poor DLs in concentration units compared to previous work. Polyester showed a similar problem at low blood concentrations that lead to a relatively poor DL as well. However, the increased surface sensitivity and decreased penetration depth of ATR FT-IR make it an excellent choice for detection of small quantities of blood on the front surface of all fabrics tested (0.0010 µg for cotton, 0.0077 µg for nylon, 0.011 µg for acrylic, and 0.0066 µg for polyester).

  19. Analysis of clay smoking pipes from archeological sites in the region of the Guanabara Bay (Rio de Janeiro, Brazil) by FT-IR

    Science.gov (United States)

    Freitas, Renato P.; Ribeiro, Iohanna M.; Calza, Cristiane; Oliveira, Ana L.; Silva, Mariane L.; Felix, Valter S.; Ferreira, Douglas S.; Coelho, Felipe A.; Gaspar, Maria D.; Pimenta, André R.; Medeiros, Elanio A.; Lopes, Ricardo T.

    2016-06-01

    In this study, twenty samples of clay smoking pipes excavated in an 18 km2 area between the Macacu and Caceribu rivers, in the municipality of Itaboraí, Rio de Janeiro, Brazil were analyzed by FT-IR technique. The samples, excavated in different archeological sites of the region, are dated between the seventeenth and the nineteenth centuries and are part of the material culture left by Africans and African descendants that lived in the complex. FT-IR analyses and complementary SEM-EDS studies showed that the clay paste used in the manufacture of smoking pipes, mostly handcrafted, is composed of quartz, feldspar, phyllosilicates and iron oxides. Multivariate statistical tests (PCA) were applied to FT-IR data to assess the interactions between the archeological sites. The results indicated that one archeological site - Macacu IV - is greatly related to the other sites. The results obtained have helped archeologists and anthropologists in better understanding the manufacturing process employed in ancient ceramic artifacts produced during the period of colonial Brazil.

  20. Chemical profiling and adulteration screening of Aquilariae Lignum Resinatum by Fourier transform infrared (FT-IR) spectroscopy and two-dimensional correlation infrared (2D-IR) spectroscopy

    Science.gov (United States)

    Qu, Lei; Chen, Jian-bo; Zhang, Gui-Jun; Sun, Su-qin; Zheng, Jing

    2017-03-01

    As a kind of expensive perfume and valuable herb, Aquilariae Lignum Resinatum (ALR) is often adulterated for economic motivations. In this research, Fourier transform infrared (FT-IR) spectroscopy is employed to establish a simple and quick method for the adulteration screening of ALR. First, the principal chemical constituents of ALR are characterized by FT-IR spectroscopy at room temperature and two-dimensional correlation infrared (2D-IR) spectroscopy with thermal perturbation. Besides the common cellulose and lignin compounds, a certain amount of resin is the characteristic constituent of ALR. Synchronous and asynchronous 2D-IR spectra indicate that the resin (an unstable secondary metabolite) is more sensitive than cellulose and lignin (stable structural constituents) to the thermal perturbation. Using a certified ALR sample as the reference, the infrared spectral correlation threshold is determined by 30 authentic samples and 6 adulterated samples. The spectral correlation coefficient of an authentic ALR sample to the standard reference should be not less than 0.9886 (p = 0.01). Three commercial adulterated ALR samples are identified by the correlation threshold. Further interpretation of the infrared spectra of the adulterated samples indicates the common adulterating methods - counterfeiting with other kind of wood, adding ingredient such as sand to increase the weight, and adding the cheap resin such as rosin to increase the content of resin compounds. Results of this research prove that FT-IR spectroscopy can be used as a simple and accurate quality control method of ALR.

  1. Complementary online aerosol mass spectrometry and offline FT-IR spectroscopy measurements: Prospects and challenges for the analysis of anthropogenic aerosol particle emissions

    Science.gov (United States)

    Faber, Peter; Drewnick, Frank; Bierl, Reinhard; Borrmann, Stephan

    2017-10-01

    The aerosol mass spectrometer (AMS) is well established in investigating highly time-resolved dynamics of submicron aerosol chemical composition including organic aerosol (OA). However, interpretation of mass spectra on molecular level is limited due to strong fragmentation of organic substances and potential reactions inside the AMS ion chamber. Results from complementary filter-based FT-IR absorption measurements were used to explain features in high-resolution AMS mass spectra of different types of OA (e.g. cooking OA, cigarette smoking OA, wood burning OA). Using this approach some AMS fragment ions were validated in this study as appropriate and rather specific markers for a certain class of organic compounds for all particle types under investigation. These markers can therefore be used to get deeper insights in the chemical composition of OA based on AMS mass spectra in upcoming studies. However, the specificity of other fragment ions such as C2H4O2+ (m/z 60.02114) remains ambiguous. In such cases, complementary FT-IR measurements allow the interpretation of highly time-resolved AMS mass spectra at the level of molecular functional groups. Furthermore, this study discusses the challenges in reducing inorganic interferences (e.g. from water and ammonium salts) in FT-IR spectra of atmospheric aerosols to decrease spectral uncertainties for better comparisons and, thus, to get more robust results.

  2. Discrimination of edible oils and fats by combination of multivariate pattern recognition and FT-IR spectroscopy: A comparative study between different modeling methods

    Science.gov (United States)

    Javidnia, Katayoun; Parish, Maryam; Karimi, Sadegh; Hemmateenejad, Bahram

    2013-03-01

    By using FT-IR spectroscopy, many researchers from different disciplines enrich the experimental complexity of their research for obtaining more precise information. Moreover chemometrics techniques have boosted the use of IR instruments. In the present study we aimed to emphasize on the power of FT-IR spectroscopy for discrimination between different oil samples (especially fat from vegetable oils). Also our data were used to compare the performance of different classification methods. FT-IR transmittance spectra of oil samples (Corn, Colona, Sunflower, Soya, Olive, and Butter) were measured in the wave-number interval of 450-4000 cm-1. Classification analysis was performed utilizing PLS-DA, interval PLS-DA, extended canonical variate analysis (ECVA) and interval ECVA methods. The effect of data preprocessing by extended multiplicative signal correction was investigated. Whilst all employed method could distinguish butter from vegetable oils, iECVA resulted in the best performances for calibration and external test set with 100% sensitivity and specificity.

  3. FTIR, FT-Raman, UV-Visible spectra and quantum chemical calculations of allantoin molecule and its hydrogen bonded dimers.

    Science.gov (United States)

    Alam, Mohammad Jane; Ahmad, Shabbir

    2015-02-05

    FTIR, FT-Raman and electronic spectra of allantoin molecule are recorded and investigated using DFT and MP2 methods with 6-311++G(d,p) basis set. The molecular structure, anharmonic vibrational spectra, natural atomic charges, non-linear optical properties, etc. have been computed for the ground state of allantoin. The anharmonic vibrational frequencies are calculated using PT2 algorithm (Barone method) as well as VSCF and CC-VSCF methods. These methods yield results that are in remarkable agreement with the experiment. The coupling strengths between pairs of modes are also calculated using coupling integral based on 2MR-QFF approximation. The simulations on allantoin dimers have been also performed at B3LYP/6-311++G(d,p) level of theory to investigate the effect of the intermolecular interactions on the molecular structure and vibrational frequencies of the monomer. Vibrational assignments are made with the great accuracy using PED calculations and animated modes. The combination and overtone bands have been also identified in the FTIR spectrum with the help of anharmonic computations. The electronic spectra are simulated in gas and solution at TD-B3LYP/6-311++G(d,p) level of theory. The important global quantities such as electro-negativity, electronic chemical potential, electrophilicity index, chemical hardness and softness based on HOMO, LUMO energy eigenvalues are also computed. NBO analysis has been performed for monomer and dimers of allantoin at B3LYP/6-311++G(d,p) level of theory. Copyright © 2014 Elsevier B.V. All rights reserved.

  4. FT-Raman spectroscopic study of skin wound healing in diabetic rats treated with Cenostigma macrophyllum Tul

    Energy Technology Data Exchange (ETDEWEB)

    Coelho, Nayana Pinheiro Machado de Freitas; Martins, Marcelino, E-mail: nayanamachado@oi.com.br [Faculdade Diferencial Integral (FACID), Teresina, PI (Brazil); Costa, Charlytton Luis Sena da; Maia Filho, Antonio Luis [Universidade Estadual do Piaui (UESPI), Teresina, PI (Brazil); Raniero, Leandro; Martin, Airton Abrahao; Arisawa, Emilia Angela Loschiavo [Universidade do Vale do Paraiba (UNIVAP), Sao Jose dos Campos, SP (Brazil). Instituto de Pesquisa e Desenvolvimento

    2014-07-01

    Introduction: patients with diabetes mellitus exhibit a delay in the lesion repair process. The active components of Cenostigma macrophyllum may represent a viable alternative to facilitate the recovery of these lesions. The aim of this study was to evaluate the effects of emulsion oil-water Cenostigma macrophyllum in the repair process of lesions in rats with induced diabetes. Methods: 63 male rats (Wistar, 200-250 g body weight, 30-40 days old) were distributed into the following groups: control (C), diabetic (D) and diabetic treated with Cenostigma macrophyllum (P), subdivided based on the experimental times, days 7, 14 and 28, with 21 animals per main group. Diabetes mellitus (DM) was induced by administration of streptozotocin (50 mg/kg via penile vein and 12-h fasting) and confirmed at day 21 (glycemic index > 240 mg/dL). In the animals of group P, 0.5 ml of the oil-water emulsion obtained from the plant seed was used. The samples were removed and hemisectioned, and one portion was used for the quantitative histological analysis of collagen using Masson's trichrome staining, while another portion was analyzed by FT-Raman spectroscopy. Results: A higher percentage area of the volume of collagen fibers was observed for the experimental time Day 14 in group P compared with group D (p < 0.001). Regarding the ratio of areas of the amides I (1700-1600 cm{sup -1}) and III (1245-1345 cm{sup -1}), the groups D and P show the opposite behavior. Conclusion: Cenostigma macrophyllum accelerated the repair process in skin of diabetic ratsfor14 days. (author)

  5. FT-IR-cPAS—New Photoacoustic Measurement Technique for Analysis of Hot Gases: A Case Study on VOCs

    Science.gov (United States)

    Hirschmann, Christian Bernd; Koivikko, Niina Susanna; Raittila, Jussi; Tenhunen, Jussi; Ojala, Satu; Rahkamaa-Tolonen, Katariina; Marbach, Ralf; Hirschmann, Sarah; Keiski, Riitta Liisa

    2011-01-01

    This article describes a new photoacoustic FT-IR system capable of operating at elevated temperatures. The key hardware component is an optical-readout cantilever microphone that can work up to 200 °C. All parts in contact with the sample gas were put into a heated oven, incl. the photoacoustic cell. The sensitivity of the built photoacoustic system was tested by measuring 18 different VOCs. At 100 ppm gas concentration, the univariate signal to noise ratios (1σ, measurement time 25.5 min, at highest peak, optical resolution 8 cm−1) of the spectra varied from minimally 19 for o-xylene up to 329 for butyl acetate. The sensitivity can be improved by multivariate analyses over broad wavelength ranges, which effectively co-adds the univariate sensitivities achievable at individual wavelengths. The multivariate limit of detection (3σ, 8.5 min, full useful wavelength range), i.e., the best possible inverse analytical sensitivity achievable at optimum calibration, was calculated using the SBC method and varied from 2.60 ppm for dichloromethane to 0.33 ppm for butyl acetate. Depending on the shape of the spectra, which often only contain a few sharp peaks, the multivariate analysis improved the analytical sensitivity by 2.2 to 9.2 times compared to the univariate case. Selectivity and multi component ability were tested by a SBC calibration including 5 VOCs and water. The average cross selectivities turned out to be less than 2% and the resulting inverse analytical sensitivities of the 5 interfering VOCs was increased by maximum factor of 2.2 compared to the single component sensitivities. Water subtraction using SBC gave the true analyte concentration with a variation coefficient of 3%, although the sample spectra (methyl ethyl ketone, 200 ppm) contained water from 1,400 to 100k ppm and for subtraction only one water spectra (10k ppm) was used. The developed device shows significant improvement to the current state-of-the-art measurement methods used in industrial

  6. FT-IR-cPAS—New Photoacoustic Measurement Technique for Analysis of Hot Gases: A Case Study on VOCs

    Directory of Open Access Journals (Sweden)

    Riitta Liisa Keiski

    2011-05-01

    Full Text Available This article describes a new photoacoustic FT-IR system capable of operating at elevated temperatures. The key hardware component is an optical-readout cantilever microphone that can work up to 200 °C. All parts in contact with the sample gas were put into a heated oven, incl. the photoacoustic cell. The sensitivity of the built photoacoustic system was tested by measuring 18 different VOCs. At 100 ppm gas concentration, the univariate signal to noise ratios (1σ, measurement time 25.5 min, at highest peak, optical resolution 8 cm−1 of the spectra varied from minimally 19 for o-xylene up to 329 for butyl acetate. The sensitivity can be improved by multivariate analyses over broad wavelength ranges, which effectively co-adds the univariate sensitivities achievable at individual wavelengths. The multivariate limit of detection (3σ, 8.5 min, full useful wavelength range, i.e., the best possible inverse analytical sensitivity achievable at optimum calibration, was calculated using the SBC method and varied from 2.60 ppm for dichloromethane to 0.33 ppm for butyl acetate. Depending on the shape of the spectra, which often only contain a few sharp peaks, the multivariate analysis improved the analytical sensitivity by 2.2 to 9.2 times compared to the univariate case. Selectivity and multi component ability were tested by a SBC calibration including 5 VOCs and water. The average cross selectivities turned out to be less than 2% and the resulting inverse analytical sensitivities of the 5 interfering VOCs was increased by maximum factor of 2.2 compared to the single component sensitivities. Water subtraction using SBC gave the true analyte concentration with a variation coefficient of 3%, although the sample spectra (methyl ethyl ketone, 200 ppm contained water from 1,400 to 100k ppm and for subtraction only one water spectra (10k ppm was used. The developed device shows significant improvement to the current state-of-the-art measurement methods used

  7. FT-IR/ATR法によるコーヒー飲料の赤外分光特性抽出と主要複数成分の同時定量

    OpenAIRE

    橋本, 篤; 森, 久典; 狩野, 幹人; 亀岡, 孝治; 島津, 秀雄; 小林, 香織; Hashimoto, Atsushi; Mori, Hisanori; Kanou, Mikihito; Kameoka, Takaharu; Shimazu, Hideo; Kobayashi, Kaori

    2009-01-01

    We developed a mid-infrared (MIR) spectroscopic evaluation method of brewed coffee, whose quality and taste depend highly on properties such as the geographical origin and the roasting, grinding, blending, and extraction conditions, using an FT-IR spectrometer equipped with an attenuated total reflectance (ATR) accessory. In addition, the simultaneous content determination of the main components of coffee drink was performed by applying the FT-IR/ATR method. We studied the effects of differen...

  8. Synthesis, molecular structure and vibrational analysis of D-D-A based carbazole decorated phenothiazine-3-carbaldehyde: Experimental (FT-IR, UV and NMR) and density functional theory (DFT) calculations

    Science.gov (United States)

    Karuppasamy, Ayyanar; Gokula Krishnan, Kannan; Pillai Velayutham Pillai, Muthiah; Ramalingan, Chennan

    2017-01-01

    A novel molecule, 10-(9-hexyl-9H-carbazol-3yl)-10H-phenothiazine-3-carbaldehyde (CZPTZA) has been synthesized and characterized through FT-IR, UV-Vis, NMR spectroscopic studies and molecular orbital calculations. Optimized geometrical structure, harmonic vibrational frequencies and NMR are computed with B3LYP method using 6-311++G (d,p) basis set. The geometrical parameters of the title compound obtained from Single Crystal XRD studies have been found in accord with the calculated (DFT) values. The experimentally observed vibrational frequencies are compared with the calculated ones, which were found to be in good agreement with each other. UV-Vis spectra of the title compound have also been recorded and the electronic properties, viz. excitation energies, calculated energies, oscillator strengths, frontier orbital energies and band gap energies are computed with TD-DFT/CAM-B3LYP method using 6-311++G (d,p) as the basis set. The 1H and 13C NMR chemical shifts of the molecule have been calculated by the Gauge Independent Atomic Orbital (GIAO) method and compared with the experimental outcome. Also, the values of dipole moment, polarizabilities and first order hyperpolarizabilities have been computed.

  9. Synthesis, spectroscopic investigations (FT-IR, NMR, UV-Vis, and TD-DFT), and molecular docking of (E)-1-(benzo[d][1, 3]dioxol-6-yl)-3-(6-methoxynaphthalen-2-yl)prop-2-en-1-one

    Science.gov (United States)

    Therasa Alphonsa, A.; Loganathan, C.; Athavan Alias Anand, S.; Kabilan, S.

    2017-02-01

    The compound (E)-1-(benzo [d] [1, 3] dioxol-6-yl)-3-(6-methoxy naphthalen-2-yl) prop-2-en-1-one (AKN) was synthesized and characterized by FT-IR, NMR, and UV-Vis spectrometer. The optimized molecular geometry, bond lengths, bond angles, atomic charges, harmonic vibrational wave numbers and intensities of vibrational bonds of the title compound have been investigated by Time dependent- Density Functional Theory (TD-DFT) using a standard B3LYP method with 6-31 G (d, p) basis set available in the Gaussian 09W package. 1H and 13C NMR chemical shifts of the molecule were calculated using Gauge-independent atomic orbital method (GIAO). Experimental excitation energies of the molecules were matched with the theoretically calculated energies. The atomic charge distributions of the various atoms present in the AKN were obtained by Mulliken charge population analysis. The Molecular Electrostatic Potential (MEP) analysis reveals the sites for electrophilic attack and nucleophilic reactions in the molecule. The difference between the observed and scaled frequencies was small. The HOMO to LUMO transition implies an electron density transfer. The intramolecular contacts have been interpreted using Natural Bond Orbital (NBO) analysis. The calculation results were applied to simulate spectra of the title compound, which show excellent agreement with observed spectra. To provide information about the interactions between human cytochrome protein and the novel compound theoretically, docking studies were carried out using Schrödinger software.

  10. Application of MCR-ALS to reveal intermediate conformations in the thermally induced α-β transition of poly-L-lysine monitored by FT-IR spectroscopy

    Science.gov (United States)

    Alcaráz, Mirta R.; Schwaighofer, Andreas; Goicoechea, Héctor; Lendl, Bernhard

    2017-10-01

    Temperature-induced conformational transitions of poly-L-lysine were monitored with Fourier-transform infrared (FT-IR) spectroscopy between 10 °C and 70 °C. Chemometric analysis of dynamic IR spectra was performed by multivariate curve analysis-alternating least squares (MCR-ALS) of the amide I‧ and amide II‧ spectral region. With this approach, the pure spectral and concentration profiles of the conformational transition were obtained. Beside the initial α-helical, the intermediate random coil/extended helices and the final β-sheet structure, an additional intermediate PLL conformation was identified and attributed to a transient β-sheet structure.

  11. In situ FT-IR studies on the mechanism of selective catalytic reduction of NOx by propene over SnO2/Al2O3 catalyst.

    Science.gov (United States)

    Liu, Zhiming; Woo, Seong Ihl; Lee, Won Su

    2006-12-28

    The mechanism of the selective catalytic reduction (SCR) of NOx by propene over SnO2/Al2O3 catalyst in the presence of oxygen has been investigated using in situ Fourier transform infrared (FT-IR) spectroscopy. In situ IR measurements indicate that acetate and formate, which are the derivatives of the partial oxidation of propene, play a crucial role in the formation of NCO by reacting with the reactive monodentate nitrate species. The resulting NCO species subsequently reacts with NOx to form N2. The presence of oxygen substantially contributes to the partial oxidation of propene and thus shows a promoting effect for the NOx reduction.

  12. DETERMINATION OF CRYSTALLINITY INDEX OF CARBOHYDRATE COMPONENTS IN HEMP (CANNABIS SATIVA L. WOODY CORE BY MEANS OF FT-IR SPECTROSCOPY

    Directory of Open Access Journals (Sweden)

    Esat Gümüşkaya

    2005-04-01

    Full Text Available In this study; it was investigated chemical compositions of hemp woody core and changes in crystallinity index of its carbohydrate components by using FT-IR spectroscopy was investigated. It was determined that carbohyrate components ratio in hemp woody core were similar to that in hard wood, but lignin content in hemp woody core was higher than in hard wood. Crystallinity index of carbohydrate components in hemp woody core increased by removing amorphous components. It was designated that monoclinic structure in hemp woody core and its carbohydrate components was dominant, but triclinic ratio increased by treated chemical isolation of carbohydrate from hemp woody core.

  13. Experimental spectroscopic (FTIR, FT-Raman, FT-NMR, UV-Visible) and DFT studies of 1-ethyl-1,4-dihydro-7-methyl-4oxo-1,8 napthyridine-3-carboxylic acids.

    Science.gov (United States)

    Muthu, S; Elamurugu Porchelvi, E

    2013-12-01

    The solid phase FTIR and FT-Raman spectra of 1-ethyl-1,4-dihydro-7-methyl-4oxo-1,8 napthyridine-3-carboxylic acid (EDMONCA) have been recorded in the regions 4000-500 and 4000-400 cm(-1) respectively. The equilibrium geometry, harmonic vibrational frequencies have been investigated by DFT/B3LYP and B3PW91 methods with 6-311G (d,p) basis set. The different between the observed and scaled wave number values of most of the fundamental is very small. The assignments of the vibrational spectra have been carried out with the aid of normal coordinate analysis (NCA) following the scaled quantum mechanical force field methodology (SQMFFM). Stability of the molecule arising from hyper conjugative interactions, charge delocalization has been analyzed using natural bond orbital (NBO) analysis. UV-Visible spectrum of the compound was recorded and the electronic properties HOMO and LOMO energies were measured. The electric dipole moment (μD) and first hyperpolarizability (βtot) values of the investigated molecule were computed using ab initio quantum mechanical calculations. The calculated results also show that the EDMONCA molecule may have microscopic nonlinear optics (NLO) behavior with non-zero values. (1)H and (13)C NMR spectra were recorded and (1)H and (13)C nuclear magnetic resonance chemical shift of the molecule were calculated using the gauge independent atomic orbital (GIAO) method. Thermal stability of EDMONCA was studied by thermogravimetric analysis (TGA). Next Fukui function was calculated to explain the chemical selectivity or reactivity site in EDMONCA. Finally molecular electrostatic potential (MEP) and other molecular properties were performed. Copyright © 2013 Elsevier B.V. All rights reserved.

  14. Application of spectroscopic methods for identification (FT-IR, Raman spectroscopy) and determination (UV, EPR) of quercetin-3-O-rutinoside. Experimental and DFT based approach.

    Science.gov (United States)

    Paczkowska, Magdalena; Lewandowska, Kornelia; Bednarski, Waldemar; Mizera, Mikołaj; Podborska, Agnieszka; Krause, Anna; Cielecka-Piontek, Judyta

    2015-04-05

    Vibrational (FT-IR, Raman) and electronic (UV, EPR) spectral measurements were performed for an analysis of rutin (quercetin-3-O-rutinoside) obtained from Rutaofficinalis. The identification of rutin was done with the use of FT-IR and Raman spectra. Those experimental spectra were determined with the support of theoretical calculations based on a DFT method with the B3LYP hybrid functional and 6-31G(d,p) basis set. The application of UV and EPR spectra was found to be a suitable analytical approach to the evaluation of changes in rutin exposed to certain physicochemical factors. Differences in absorbance observed in direct UV spectra were used to monitor changes in the concentration of rutin in degraded samples. Spectra of electron paramagnetic resonance allowed studying the process of free-radical quenching in rutin following its exposure to light. The molecular electrostatic potential (MEP) and frontier molecular orbitals (LUMO-HOMO) were also determined in order to predict structural changes and reactive sites in rutin.

  15. Observations of surface-mediated reduction of Pu(VI) to Pu(IV) on hematite nanoparticles by ATR FT-IR

    Energy Technology Data Exchange (ETDEWEB)

    Emerson, Hilary P. [Florida International Univ., Applied Research Center, Miami, FL (United States); Powell, Brian A. [Clemson Univ., Dept. of Enviromental Engineering and Earth Sciences, Anderson, SC (United States)

    2015-07-01

    Previous studies have shown that mineral surfaces may facilitate the reduction of plutonium though the mechanisms of the reduction are still unknown. The objective of this study is to use batch sorption and attenuated total reflectance Fourier transform infrared spectroscopy experiments to observe the surface-mediated reduction of plutonium on hematite nanoparticles. These techniques allow for in situ measurement of reduction of plutonium with time and may lead to a better understanding of the mechanisms of surface mediated reduction of plutonium. For the first time, ATR FT-IR peaks for Pu(VI) sorbed to hematite are measured at ∝ 916 cm{sup -1}, respectively. The decrease in peak intensity with time provides a real-time, direct measurement of Pu(VI) reduction on the hematite surface. In this work pseudo first order rate constants estimated at the high loadings (22 mg{sub Pu}/g{sub hematite}, 1.34 x 10{sup -6} M{sub Pu}/m{sup 2}) for ATR FT-IR are approximately 10 x slower than at trace concentrations based on previous work. It is proposed that the reduced rate constant at higher Pu loadings occurs after the reduction capacity due to trace Fe(II) has been exhausted and is dependent on the oxidation of water and possibly electron shuttling based on the semiconducting nature of hematite. Therefore, the reduction rate at higher loadings is possibly due to the thermodynamic favorability of Pu(IV)-hydroxide complexes.

  16. Amide resonance and FT-IR spectra of some β-lactam derivatives: application of resolution enhancement procedures in Fourier space

    Science.gov (United States)

    Gil, M.; Plumet, J.; Iza, N.; Morcillo, J.

    1988-05-01

    Fourier Transform infrared (FT-IR) spectra of five 4-acyl-β-lactam derivatives in three organic solvents (carbon tetrachloride, benzene and chloroform) have been registered. Nominal spectral resolution was 1 cm -1 and a Happ-Genzel function was used to apodize the interferograms. Fourier self-deconvolutions were done using standard software based on the algorithm of Kauppinen (1981). The digitalized FT-IR spectra were converted into second and fourth derivatives in Fourier domain using a standard software package supplied for the purpose and based on the technique developed by the N.R.C.C. group. The inherent enhancement resolution of Fourier self-deconvolution and derivatives in Fourier Space have permitted resolution of the characteristic "amide I" bands of the β-lactam ring. The ν(CO) band splitting in the "amide I" region is due to solvent and ring substitution influences on amide resonance and not to H-bonding association. Simultaneous application of both apparent resolution enhancement procedures has allowed us to identify true bands and mathematical artifacts.

  17. A new tridentate Schiff base Cu(II) complex: synthesis, experimental and theoretical studies on its crystal structure, FT-IR and UV-Visible spectra.

    Science.gov (United States)

    Saheb, Vahid; Sheikhshoaie, Iran; Setoodeh, Nasim; Rudbari, Hadi Amiri; Bruno, Giuseppe

    2013-06-01

    A new Cu(II) complex [Cu(L)(NCS)] has been synthesized, using 1-(N-salicylideneimino)-2-(N,N-methyl)-aminoethane as tridentate ONN donor Schiff base ligand (HL). The dark green crystals of the compound are used for single-crystal X-ray analysis and measuring Fourier Transform Infrared (FT-IR) and UV-Visible spectra. Electronic structure calculations at the B3LYP and MP2 levels of theory are performed to optimize the molecular geometry and to calculate the UV-Visible and FT-IR spectra of the compound. Vibrational assignments and analysis of the fundamental modes of the compound are performed. Time-dependent density functional theory (TD-DFT) method is used to calculate the electronic transitions of the complex. A scaling factor of 1.015 is obtained for vibrational frequencies computed at the B3LYP level using basis sets 6-311G(d,p). It is found that solvent has a profound effect on the electronic absorption spectrum. The UV-Visible spectrum of the complex recorded in DMSO and DMF solution can be correctly predicted by a model in which DMSO and DMF molecules are coordinated to the central Cu atom via their oxygen atoms. Copyright © 2013 Elsevier B.V. All rights reserved.

  18. FT-IR spectroscopy and density functional theory calculations of 13C isotopologues of the helical peptide Z-Aib6-OtBu.

    Science.gov (United States)

    Zeko, Timothy; Hannigan, Steven F; Jacisin, Timothy; Guberman-Pfeffer, Matthew J; Falcone, Eric R; Guildford, Melissa J; Szabo, Christopher; Cole, Kathryn E; Placido, Jessica; Daly, Erin; Kubasik, Matthew A

    2014-01-01

    Isotope-edited FT-IR spectroscopy is a combined synthetic and spectroscopic method used to characterize local (e.g., residue-level) vibrational environments of biomolecules. We have prepared the 3(10) helical peptide Z-Aib6-OtBu and seven (13)C-enriched analogues that vary only in the number and position(s) of (13)C═O isotopic enrichment. FT-IR spectra of these eight peptides solvated in the nonpolar aprotic solvent dichloromethane have been collected and compared to frequency, intensity, and normal mode results of DFT calculations. Single (13)C enrichment of amide functional groups tends to localize amide I vibrational eigenmodes, providing residue-specific information regarding the local environment (e.g., hydrogen bonding or solvent exposure) of the peptide bond. Double (13)C enrichment of Z-Aib6-OtBu allows for examination of interamide coupling between two labeled amide functional groups, providing experimental evidence of interamide coupling in the context of 3(10) helical structure. Although the calculated and observed interamide couplings of Z-Aib6-OtBu are a few cm(-1) and less, the eight peptides exhibit distinct infrared spectra, revealing details of interamide coupling and residue level vibrational environments.

  19. Multivariate analysis of attenuated total reflection Fourier transform infrared (ATR FT-IR) spectroscopic data to confirm phase partitioning in methacrylate-based dentin adhesive.

    Science.gov (United States)

    Ye, Qiang; Parthasarathy, Ranganathan; Abedin, Farhana; Laurence, Jennifer S; Misra, Anil; Spencer, Paulette

    2013-12-01

    Water is ubiquitous in the mouths of healthy individuals and is a major interfering factor in the development of a durable seal between the tooth and composite restoration. Water leads to the formation of a variety of defects in dentin adhesives; these defects undermine the tooth-composite bond. Our group recently analyzed phase partitioning of dentin adhesives using high-performance liquid chromatography (HPLC). The concentration measurements provided by HPLC offered a more thorough representation of current adhesive performance and elucidated directions to be taken for further improvement. The sample preparation and instrument analysis using HPLC are, however, time-consuming and labor-intensive. The objective of this work was to develop a methodology for rapid, reliable, and accurate quantitative analysis of near-equilibrium phase partitioning in adhesives exposed to conditions simulating the wet oral environment. Analysis by Fourier transform infrared (FT-IR) spectroscopy in combination with multivariate statistical methods, including partial least squares (PLS) regression and principal component regression (PCR), were used for multivariate calibration to quantify the compositions in separated phases. Excellent predictions were achieved when either the hydrophobic-rich phase or the hydrophilic-rich phase mixtures were analyzed. These results indicate that FT-IR spectroscopy has excellent potential as a rapid method of detection and quantification of dentin adhesives that experience phase separation under conditions that simulate the wet oral environment.

  20. Applications of FT-IR spectroscopy to the studies of esterification and crosslinking of cellulose by polycarboxylic acids: Part II. The performance of the crosslinked cotton fabrics

    Science.gov (United States)

    Wei, Weishu; Yang, Charles Q.

    1998-06-01

    Durable press finishing processes are commonly used in the textile industry to produce wrinkle-free cotton fabrics and garments. A durable press finishing agent forms covalent bands with cellulosic hydroxyl groups, thus crosslinking the cellulose molecules. The crosslinking of cellulose increases wrinkle resistance of the treated cotton fabric and reduces fabric mechanical strength. Wrinkle recovery angle (WRA) and tensile strength are the two most important parameters used to evaluate the performance of the crosslinked cotton fabrics and garments. In this study, we investigated the correlation between WRA and tensile strength on one hand, and the amount of crosslinkages formed by the crosslinking agents including dimethyloldihydroxylethyleneurea (DMDHEU) and 1,2,3,4-butanetetracarboxylic acid (BTCA) determined by FT-IR spectroscopy on the other hand. Linear regression curves between the carbonyl band absorbance, and WRA and tensile strength of the treated cotton fabric were developed. The data indicated that FT-IR spectroscopy is a reliable technique for predicting the performance of durable press finished cotton fabrics, therefore can be used as a convenient instrumental method for quality control in the textile and garment industry.

  1. Type-IV pili spectroscopic markers: applications in the quantification of piliation levels in Moraxella bovis cells by a FT-IR ANN-based model.

    Science.gov (United States)

    Bosch, Alejandra; Prieto, Claudia; Serra, Diego Omar; Martina, Pablo; Stämmbler, Maren; Naumann, Dieter; Schmitt, Jürgen; Yantorno, Osvaldo

    2010-08-01

    Type-IV pili are cell surface organelles found in a wide variety of Gram-negative bacteria. They have traditionally been detected by electron microscopy and ELISA techniques. However, these methodologies are not appropriate for the rapid discrimination and quantification of piliated and nonpiliated cells in industrial or field conditions. Here, the analysis of FT-IR spectra of piliated, nonpiliated and sheared Moraxella bovis cells, together with purified pili suspensions spectra, allowed the identification of 3 IR regions associated to spectroscopic markers of Type-IV pili: 1750-1600, 1450-1350 and 1280-950 cm(-1). Such IR-specific markers were found for piliated cells grown in different culture systems (liquid or solid media), independently of the strain or pili serotype. They were also sensitive to pili expression levels. Therefore, on the bases of these specific spectral features, an FT-IR ANN-based model was developed to classify piliation levels in 5 distinct groups. An overall classification rate of almost 90% demonstrates the strong potential of the ANN system developed to monitor M. bovis cultures in vaccine production.

  2. A Raman scattering and FT-IR spectroscopic study on the effect of the solar radiation in Antarctica on bovine cornea

    Science.gov (United States)

    Yamamoto, Tatsuyuki; Murakami, Naoki; Yoshikiyo, Keisuke; Takahashi, Tetsuya; Yamamoto, Naoyuki

    2010-01-01

    The Raman scattering and FT-IR spectra of the corneas, transported to the Syowa station in Antarctica and exposed to the solar radiation of the mid-summer for four weeks, were studied to reveal that type IV collagen involved in corneas were fragmented. The amide I and III Raman bands were observed at 1660 and 1245 cm -1, respectively, and the amide I and II infrared bands were observed at 1655 and 1545 cm -1, respectively, for original corneas before exposure. The background of Raman signals prominently increased and the ratio of amide II infrared band versus amide I decreased by the solar radiation in Antarctica. The control experiment using an artificial UV lamp was also performed in laboratory. The decline rate of the amide II/amide I was utilized for estimating the degree of fragmentation of collagen, to reveal that the addition of vitamin C suppressed the reaction while the addition of sugars promoted it. The effect of the solar radiation in Antarctica on the corneas was estimated as the same as the artificial UV lamp of four weeks (Raman) or one week (FT-IR) exposure.

  3. Identification of Quercus agrifolia (coast live oak resistant to the invasive pathogen Phytophthora ramorum in native stands using Fourier-transform infrared (FT-IR spectroscopy

    Directory of Open Access Journals (Sweden)

    Anna Olivia Conrad

    2014-10-01

    Full Text Available Over the last two decades coast live oak (CLO dominance in many California coastal ecosystems has been threatened by the alien invasive pathogen Phytophthora ramorum, the causal agent of sudden oak death. In spite of high infection and mortality rates in some areas, the presence of apparently resistant trees has been observed, including trees that become infected but recover over time. However, identifying resistant trees based on recovery alone can take many years. The objective of this study was to determine if Fourier-transform infrared (FT-IR spectroscopy, a chemical fingerprinting technique, can be used to identify CLO resistant to P. ramorum prior to infection. Soft independent modeling of class analogy identified spectral regions that differed between resistant and susceptible trees. Regions most useful for discrimination were associated with carbonyl group vibrations. Additionally, concentrations of two putative phenolic biomarkers of resistance were predicted using partial least squares regression; > 99% of the variation was explained by this analysis. This study demonstrates that chemical fingerprinting can be used to identify resistance in a natural population of forest trees prior to infection with a pathogen. FT-IR spectroscopy may be a useful approach for managing forests impacted by sudden oak death, as well as in other situations where emerging or existing forest pests and diseases are of concern.

  4. Application of spectroscopic methods for identification (FT-IR, Raman spectroscopy) and determination (UV, EPR) of quercetin-3-O-rutinoside. Experimental and DFT based approach

    Science.gov (United States)

    Paczkowska, Magdalena; Lewandowska, Kornelia; Bednarski, Waldemar; Mizera, Mikołaj; Podborska, Agnieszka; Krause, Anna; Cielecka-Piontek, Judyta

    2015-04-01

    Vibrational (FT-IR, Raman) and electronic (UV, EPR) spectral measurements were performed for an analysis of rutin (quercetin-3-O-rutinoside) obtained from Rutaofficinalis. The identification of rutin was done with the use of FT-IR and Raman spectra. Those experimental spectra were determined with the support of theoretical calculations based on a DFT method with the B3LYP hybrid functional and 6-31G(d,p) basis set. The application of UV and EPR spectra was found to be a suitable analytical approach to the evaluation of changes in rutin exposed to certain physicochemical factors. Differences in absorbance observed in direct UV spectra were used to monitor changes in the concentration of rutin in degraded samples. Spectra of electron paramagnetic resonance allowed studying the process of free-radical quenching in rutin following its exposure to light. The molecular electrostatic potential (MEP) and frontier molecular orbitals (LUMO-HOMO) were also determined in order to predict structural changes and reactive sites in rutin.

  5. FT-IR and thermoluminescence investigation of P{sub 2}O{sub 5}-BaO-K{sub 2}O glass system

    Energy Technology Data Exchange (ETDEWEB)

    Ivascu, C. [Babes-Bolyai University, Faculty of Physics, Kogalniceanu 1, 400084 Cluj Napoca (Romania); Timar-Gabor, A. [Babes-Bolyai University, Faculty of Environmental Science, Fantanele 30, 400294 Cluj Napoca (Romania); Cozar, O. [Babes-Bolyai University, Faculty of Physics, Kogalniceanu 1, 400084 Cluj Napoca, Romania and Academy of Romanian Scientists, Splaiul Independentei 54, 050094, Bucharest (Romania)

    2013-11-13

    The 0.5P{sub 2}O{sub 5}⋅xBaO⋅(0.5−x)K{sub 2}O glass system (0≤x≤0.5mol%) is investigated by FT-IR and thermoluminescence as a possible dosimetic material. FT-IR spectra show structural network modifications with the composition variations of the studied glasses. The predominant absorption bands are characterized by two broad peaks near 500 cm{sup −1}, two weak peaks around 740 cm{sup −1} and three peaks in the 900–1270 cm{sup −1} region. The shift in the position of the band assigned to asymmetric stretching of PO{sub 2}{sup −} group, υ{sub as}(PO{sub 2}{sup −}) modes from ∼1100 cm{sup −1} to 1085 cm{sup −1} and the decrease in its relative intensity with the increasing of K{sub 2}O content shows a network modifier role of this oxide.. Luminescence investigations show that by adding modifier oxides in the phosphate glass a dose dependent TL signals result upon irradiation. Thus P{sub 2}O{sub 5}–BaO–K{sub 2}O glass system is a possible candidate material for dosimetry in the dose 0 – 50 Gy range.

  6. Caracterização por FT-IR da superfície de borracha EPDM tratada via plasma por micro-ondas

    Directory of Open Access Journals (Sweden)

    Renata P. dos Santos

    2012-01-01

    Full Text Available A superfície de uma borracha de etileno-propileno-dieno (EPDM vulcanizada foi modificada via plasma por microondas, com gases Ar, Ar/O2, N2/O2 e N2/H2, tendo como objetivo melhorar as propriedades adesivas da superfície. A técnica FT-IR/UATR foi escolhida para caracterizar as superfícies após tratamento, pois apresentou menor interferência dos ingredientes da formulação da EPDM, dentre as técnicas analisadas (ATR/KRS-5 e Ge. Grupos oxigenados foram inseridos na superfície da amostra tratada, mesmo quando não foi utilizado o oxigênio, pois estes grupos foram formados quando a superfície ativada foi exposta à atmosfera. Já em tratamentos contendo N2, grupos oxigenados e possíveis grupos nitrogenados foram identificados por FT-IR. Redução nos valores do ângulo de contato, aumento no trabalho de adesão e aumento no ensaio de resistência ao descascamento (EPDM × Poliuretano foram observados após tratamento com Ar e N2/H2, resultando em melhora nas propriedades adesivas da superfície tratada.

  7. Implementation of time-resolved step-scan fourier transform infrared (FT-IR) spectroscopy using a kHz repetition rate pump laser.

    Science.gov (United States)

    Magana, Donny; Parul, Dzmitry; Dyer, R Brian; Shreve, Andrew P

    2011-05-01

    Time-resolved step-scan Fourier transform infrared (FT-IR) spectroscopy has been shown to be invaluable for studying excited-state structures and dynamics in both biological and inorganic systems. Despite the established utility of this method, technical challenges continue to limit the data quality and more wide ranging applications. A critical problem has been the low laser repetition rate and interferometer stepping rate (both are typically 10 Hz) used for data acquisition. Here we demonstrate significant improvement in the quality of time-resolved spectra through the use of a kHz repetition rate laser to achieve kHz excitation and data collection rates while stepping the spectrometer at 200 Hz. We have studied the metal-to-ligand charge transfer excited state of Ru(bipyridine)(3)Cl(2) in deuterated acetonitrile to test and optimize high repetition rate data collection. Comparison of different interferometer stepping rates reveals an optimum rate of 200 Hz due to minimization of long-term baseline drift. With the improved collection efficiency and signal-to-noise ratio, better assignments of the MLCT excited-state bands can be made. Using optimized parameters, carbonmonoxy myoglobin in deuterated buffer is also studied by observing the infrared signatures of carbon monoxide photolysis upon excitation of the heme. We conclude from these studies that a substantial increase in performance of ss-FT-IR instrumentation is achieved by coupling commercial infrared benches with kHz repetition rate lasers.

  8. On the Use of Fourier Transform Infrared (FT-IR) Spectroscopy and Synthetic Calibration Spectra to Quantify Gas Concentrations in a Fischer-Tropsch Catalyst System

    Science.gov (United States)

    Ferguson, Frank T.; Johnson, Natasha M.; Nuth, Joseph A., III

    2015-01-01

    One possible origin of prebiotic organic material is that these compounds were formed via Fischer-Tropsch-type (FTT) reactions of carbon monoxide and hydrogen on silicate and oxide grains in the warm, inner-solar nebula. To investigate this possibility, an experimental system has been built in which the catalytic efficiency of different grain-analog materials can be tested. During such runs, the gas phase above these grain analogs is sampled using Fourier transform infrared (FT-IR) spectroscopy. To provide quantitative estimates of the concentration of these gases, a technique in which high-resolution spectra of the gases are calculated using the high-resolution transmission molecular absorption (HITRAN) database is used. Next, these spectra are processed via a method that mimics the processes giving rise to the instrumental line shape of the FT-IR spectrometer, including apodization, self-apodization, and broadening due to the finite resolution. The result is a very close match between the measured and computed spectra. This technique was tested using four major gases found in the FTT reactions: carbon monoxide, methane, carbon dioxide, and water. For the ranges typical of the FTT reactions, the carbon monoxide results were found to be accurate to within 5% and the remaining gases accurate to within 10%. These spectra can then be used to generate synthetic calibration data, allowing the rapid computation of the gas concentrations in the FTT experiments.

  9. Synchrotron FT-IR analyses of microstructured biomineral domains: Hints to the biomineralization processes in freshwater cultured pearls.

    Science.gov (United States)

    Soldati, A. L.; Vicente-Vilas, V.; Gasharova, B.; Jacob, D. E.

    2009-04-01

    Recent investigations in freshwater cultured pearls (bio-carbonate) by micro-Raman spectroscopy (Wehrmeister et al., 2008; Soldati et al., 2008), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) imaging (Jacob et al., 2008) show that the pearl biomineralisation starts with a self assembling process in which an existing gel matrix of amorphous calcium carbonate (ACC) and organic substances reorganizes and conglomerates in small domains; these conglomerates then form prisms and mature nacreous tablets of aragonite or vaterite. Raman spectroscopy shows that the calcium carbonate polymorphs have decreasing luminescence in the order ACC>Vaterite>Aragonite, coinciding with decreasing quantities of S and P (related to the organic matrix) measured by Laser Ablation Inductively Coupled Plasma Mass Spectroscopy (LA-ICP-MS) and Electron Probe Micro Analyzer (EPMA). Although little is known about the process of transformation of the ACC gel into vaterite and aragonite, it is speculated that this probably involves dehydration and change of the accompanying organic matrix. This is also supported by our laboratory FT-IR analysis. However, due to the small size of the areas of ACC (about 10 ?m) and the biogenic crystals an in-situ high spatially resolved IR-method is needed to record how the water content and organic matrix change in the biomineralisation sequence, to understand which processes take place in the self-organization. The beamline IR-1 at the ANKA synchrotron source (Karlsruhe, Germany) was used for this experiment. Freshwater cultured pearls from China cultured in Hyriopsis cumingii mussels by tissue nucleation methods (so-called beadless pearls) as well as by bead implantation methods (aragonite nucleus) were studied. The pearls were cut in half with a diamond-plated saw and polished with diamond paste on a copper plate. Micro-Raman spectroscopy maps (Department of Geosciences, at the Johannes Gutenberg-University, Mainz) were generated

  10. Estimation of cellulose crystallinity of lignocelluloses using near-IR FT-Raman spectroscopy and comparison of the Raman and Segal-WAXS methods.

    Science.gov (United States)

    Agarwal, Umesh P; Reiner, Richard R; Ralph, Sally A

    2013-01-09

    Of the recently developed univariate and multivariate near-IR FT-Raman methods for estimating cellulose crystallinity, the former method was applied to a variety of lignocelluloses: softwoods, hardwoods, wood pulps, and agricultural residues/fibers. The effect of autofluorescence on the crystallinity estimation was minimized by solvent extraction or chemical treatment or both. Additionally, when the roles of lignin and hemicellulose in the Raman crystallinity assessment were investigated, it was found that syringyl lignin containing lignocelluloses generated somewhat higher crystallinity, whereas the presence of hemicellulose reduced the crystallinity. Overall, when autofluorescence was minimized and corrections made for hemicellulose and syringyl lignin contributions, the univariate Raman method performed well and estimated cellulose crystallinity accurately. Moreover, when the Raman and Segal-WAXS methods were compared, we observed that in the absence of significant fluorescence, the Raman method was influenced mostly by hemicellulose and syringyl lignin, whereas the Segal-WAXS was affected by various types of lignin and hemicellulose. It was concluded that the near-IR FT-Raman method with corrections for influences of syringyl lignin and hemicellulose can be used to correctly estimate cellulose crystallinity.

  11. FT-Raman study of deferoxamine and deferiprone exhibits potent amelioration of structural changes in the liver tissues of mice due to aluminum exposure

    Science.gov (United States)

    Sivakumar, S.; Khatiwada, Chandra Prasad; Sivasubramanian, J.; Raja, B.

    2014-01-01

    The present study inform the alterations on major biochemical constituents such as lipids, proteins, nucleic acids and glycogen along with phosphodiester linkages, tryptophan bands, tyrosine doublet, disulfide bridge conformations, aliphatic hydrophobic residue, and salt bridges in liver tissues of mice using Fourier transform Raman spectroscopy. In amide I, amide II and amide III, the area value significant decrease due structural alteration in the protein, glycogen and triglycerides levels but chelating agents DFP and DFO upturned it. Morphology changes by aluminium induced alterations and recovery by chelating agents within liver tissues known by histopathological examination. Concentrations of trace elements were found by ICP-OES. FT-Raman study was revealed to be in agreement with biochemical studies and demonstrate that it can successfully specify the molecular alteration in liver tissues. The tyrosyl doublet ratio I899/I831 decreases more in aluminum intoxicated tissues but treatment with DFP and DFO + DFP brings back to nearer control value. This indicates more variation in the hydrogen bonding of the phenolic hydroxyl group due to aluminum poisoning. The decreased Raman intensity ratio (I3220/I3400) observed in the aluminum induced tissues suggests a decreased water domain size, which could be interpreted in terms of weaker hydrogen-bonded molecular species of water in the aluminum intoxicated liver tissues. Finally, FT-Raman spectroscopy might be a useful tool for obtained successfully to indicate the molecular level changes.

  12. Direct identification of early synthetic dyes: FT-Raman study of the illustrated broadside prints of José Gaudalupe Posada (1852-1913)

    Science.gov (United States)

    Casadio, F.; Mauck, K.; Chefitz, M.; Freeman, R.

    2010-09-01

    Fourier Transform (FT)-Raman spectroscopy was used for the non-invasive, direct identification of colorants used to dye historical printed papers, overcoming obstacles such as low concentration of the dye, faded colors and fluorescence interference of the aged paper substrate. Based on a newly created FT-Raman reference database of 20 widely used dyes in the 19th century paper industry, the detectability of these dyes on aged biomaterials was determined by studying dyed paper samples from contemporary dye manuals, and identifying diagnostic peaks detectable on those substrates. Lastly, the method was applied to analyze the colorants used to dye the papers of a group of prints illustrated by the influential Mexico City artist José Guadalupe Posada, active 1876-1913. Unambiguous identification of the synthetic organic colorants Malachite Green (a triarylmethane dye), Orange II and Metanil Yellow (two acid monoazo dyes), Cotton Scarlet (an acid diazo dye), Phloxine (a xanthene dye) and Victoria Blue (a triarylmethane dye) in several of Posada’s prints challenged previous art-historical assumptions that these artworks were colored with natural dyes. The acquired knowledge has important conservation implications given that aniline dyes are sensitive to light and to aqueous treatments otherwise commonly carried out on works of art on paper.

  13. Caracterização de um pré-impregnado aeronáutico por FT-IR e análise térmica Characterization of pre-impregnated of epoxy resin/carbon fiber

    Directory of Open Access Journals (Sweden)

    Vanesa C. G. M. Ferrari

    2012-01-01

    Full Text Available Este trabalho consiste na caracterização de um pré-impregnado ("prepreg" de resina epoxídica/fibra de carbono, usando-se espectroscopia no infravermelho com transformada de Fourier (FT-IR, análise termogravimétrica (TG, calorimetria exploratória diferencial (DSC e análise térmica dinâmico-mecânica (DMTA. A análise por FT-IR foi realizada nos modos de transmissão (pastilha de KBr, pirólise em bico de Bunsen e controlada e detecção fotoacústica (PAS. Os espectros de FT-IR de transmissão revelaram a presença de resina epoxídica, grupos ciano, amínicos e bisfenol A, que possibilitaram identificar o provável agente de cura:a cianoguanidina (ou dicianodiamida do sistema epoxídico. Os espectros de FT-IR/PAS permitiram acompanhar as alterações espectrométricas causadas pela cura. A análise térmica auxiliou na observação e compreensão dos eventos durante o processo de cura, etapas de gelificação e vitrificação, e da influência destas nas temperaturas de transição vítrea (Tg do material curado e na escolha do intervalo de temperatura de cura, que é um dos parâmetros mais importantes do processo produtivo.This work explores the characterization of pre-impregnated ("prepreg" materials made with an epoxy resin/carbon fiber, using FT-IR spectroscopy, thermogravimetry (TG, differential scanning calorimetry (DSC and dynamic mechanical thermal analysis (DMTA. FT-IR spectroscopy was used in the transmission mode (KBr pellets, pyrolysis without control and controlled pyrolysis and photoacoustic detection (FT-IR/PAS. The transmission FT-IR spectra revealed the presence of epoxy resin, cyano groups, amine and bisphenol A, which allowed us to identify the probable agent of cure: cyanoguanidine (or DCD. With FT-IR/PAS it was possible to monitor spectrometric changes caused by curing. The thermal analysis assisted in observing and understanding events during the curing process, including the gelation and vitrification steps. It

  14. FT-Raman and chemometric tools for rapid determination of quality parameters in milk powder: Classification of samples for the presence of lactose and fraud detection by addition of maltodextrin.

    Science.gov (United States)

    Rodrigues Júnior, Paulo Henrique; de Sá Oliveira, Kamila; de Almeida, Carlos Eduardo Rocha; De Oliveira, Luiz Fernando Cappa; Stephani, Rodrigo; Pinto, Michele da Silva; de Carvalho, Antônio Fernandes; Perrone, Ítalo Tuler

    2016-04-01

    FT-Raman spectroscopy has been explored as a quick screening method to evaluate the presence of lactose and identify milk powder samples adulterated with maltodextrin (2.5-50% w/w). Raman measurements can easily differentiate samples of milk powder, without the need for sample preparation, while traditional quality control methods, including high performance liquid chromatography, are cumbersome and slow. FT-Raman spectra were obtained from samples of whole lactose and low-lactose milk powder, both without and with addition of maltodextrin. Differences were observed between the spectra involved in identifying samples with low lactose content, as well as adulterated samples. Exploratory data analysis using Raman spectroscopy and multivariate analysis was also developed to classify samples with PCA and PLS-DA. The PLS-DA models obtained allowed to correctly classify all samples. These results demonstrate the utility of FT-Raman spectroscopy in combination with chemometrics to infer about the quality of milk powder.

  15. Tuning the composition and magnetostructure of dysprosium iron garnets by Co-substitution: An XRD, FT-IR, XPS and VSM study

    Energy Technology Data Exchange (ETDEWEB)

    Tholkappiyan, R.; Vishista, K., E-mail: raovishista@gmail.com

    2015-10-01

    Graphical abstract: - Highlights: • Garnet type Dy{sub 3}Fe{sub 5−x}Co{sub x}O{sub 12} (x = 0–0.06) nanoparticles were synthesized by glycine assisted combustion method. • To investigate and confirm the phases in the synthesized ferrite nanoparticles by FT-IR and XRD analysis. • To investigate the compositional and oxidation state of the samples by X-ray photoelectron spectroscopy. • The detailed core level spectra of Dy 4d, Fe 2p, Co 2p and O 1s were analyzed using XPS. • The magnetic property was studied by VSM technique. - Abstract: We report the Co-substituting on the synthesis and properties of garnet type dysprosium ferrite nanoparticles by basic composition Dy{sub 3}Fe{sub 5−x}Co{sub x}O{sub 12} (x = 0–0.06) synthesized through glycine assisted combustion method. A possible formation mechanism of synthesized Dy{sub 3}Fe{sub 5−x}Co{sub x}O{sub 12} samples by controlling the synthesis process has been proposed. XRD, FT-IR, XPS and VSM studies were used to investigate the compositional and magnetostructural properties of the prepared nanoparticles. XRD results confirm that all the samples are single-phase cubic garnet structure with mean crystallite size of 97–105 nm obtained from Scherrer method and 95–102 nm from W–H method. FT-IR analysis shows the presence of three expected bands in the frequency limit of 450–600 cm{sup −1} attributed to metal–O stretching vibration in tetrahedral site of garnet structure. A typical survey spectrum from XPS results confirmed the presence of Dy, Fe, Co and O elements in the samples. This study also to characterize the different oxidation states of the samples by fitting the parameters of high resolution Dy 4d, Fe 2p, Co 2p and O 1s XPS spectra. The XPS data of Dy 4d spectrum show that Dy{sup 3+} ion occupy in dodecahedral (D) site. The XPS analysis of Fe 2p and Co 2p data suggests that (Fe{sup 3+} and Fe{sup 2+}), (Co{sup 3+} and Co{sup 2+}) are distributed in tetrahedral and octahedral sites

  16. Principles, performance, and applications of spectral reconstitution (SR) in quantitative analysis of oils by Fourier transform infrared spectroscopy (FT-IR).

    Science.gov (United States)

    García-González, Diego L; Sedman, Jacqueline; van de Voort, Frederik R

    2013-04-01

    Spectral reconstitution (SR) is a dilution technique developed to facilitate the rapid, automated, and quantitative analysis of viscous oil samples by Fourier transform infrared spectroscopy (FT-IR). This technique involves determining the dilution factor through measurement of an absorption band of a suitable spectral marker added to the diluent, and then spectrally removing the diluent from the sample and multiplying the resulting spectrum to compensate for the effect of dilution on the band intensities. The facsimile spectrum of the neat oil thus obtained can then be qualitatively or quantitatively analyzed for the parameter(s) of interest. The quantitative performance of the SR technique was examined with two transition-metal carbonyl complexes as spectral markers, chromium hexacarbonyl and methylcyclopentadienyl manganese tricarbonyl. The estimation of the volume fraction (VF) of the diluent in a model system, consisting of canola oil diluted to various extents with odorless mineral spirits, served as the basis for assessment of these markers. The relationship between the VF estimates and the true volume fraction (VF(t)) was found to be strongly dependent on the dilution ratio and also depended, to a lesser extent, on the spectral resolution. These dependences are attributable to the effect of changes in matrix polarity on the bandwidth of the ν(CO) marker bands. Excellent VF(t) estimates were obtained by making a polarity correction devised with a variance-spectrum-delineated correction equation. In the absence of such a correction, SR was shown to introduce only a minor and constant bias, provided that polarity differences among all the diluted samples analyzed were minimal. This bias can be built into the calibration of a quantitative FT-IR analytical method by subjecting appropriate calibration standards to the same SR procedure as the samples to be analyzed. The primary purpose of the SR technique is to simplify preparation of diluted samples such that

  17. FT-IR studies on the conformation and effective head-group area of AOT molecules in W/O microemulsions

    Institute of Scientific and Technical Information of China (English)

    周国伟; 鲍猛; 李干佐; 陈文君

    2002-01-01

    Using Fourier transform infrared(FT-IR) spectroscopy technique, the carbonyl stretching vibration bands of AOT in sodium bis(2-ethylhexyl)sulfosuccinate (AOT)/isooctane/water reverse (W/O) microemulsions system have been investigated by least square curve fitting. The results indicate that an asymmetric adsorbed peak of carbonyl stretching vibration of AOT molecule is situated in (1739 ± 1) and (1725 ± 2) cm-1. The two peaks correspond to different carbonyls in gauche conformation and trans conformation of AOT molecules, respectively. With different water contents (W0), the variations of peak intensity ratio (/= l1739/l1725) reflect the change of the ratio for the two conformation populations and the variations of the effective head-group area of AOT molecule have relations to the ratio of two conformation populations.

  18. Effect of storage on microstructural changes of Carbopol polymers tracked by the combination of positron annihilation lifetime spectroscopy and FT-IR spectroscopy.

    Science.gov (United States)

    Szabó, Barnabás; Süvegh, Károly; Zelkó, Romána

    2011-09-15

    Different types of Carbopols are frequently applied excipients of various dosage forms. Depending on the supramolecular structure, their water sorption behaviour could significantly differ. The purpose of the present study was to track the supramolecular changes of two types of Carbopol polymers (Carbopol 71G and Ultrez 10NF) alone and in their physical mixture with a water-soluble drug, vitamin B(12), as a function of storage time. The combination of FT-IR spectroscopy, positron annihilation lifetime spectroscopy (PALS) and Doppler-broadening spectroscopy was applied to follow the effect of water uptake on the structural changes. Our results indicate that water-induced interactions between polymeric chains can be sensitively detected. This enables the prediction of stability of dosage forms in the course of storage.

  19. Conversion of Natural Aldehydes from Eucalyptus citriodora, Cymbopogon citratus, and Lippia multiflora into Oximes: GC-MS and FT-IR Analysis †

    Directory of Open Access Journals (Sweden)

    Igor W. Ouédraogo

    2009-08-01

    Full Text Available Three carbonyl-containing extracts of essential oils from Eucalyptus citriodora (Myrtaceae, Cymbopogon citratus (Gramineae and Lippia multiflora (Verbenaceae were used for the preparation of oximes. The reaction mixtures were analyzed by GC-MS and different compounds were identified on the basis of their retention times and mass spectra. We observed quantitative conversion of aldehydes to their corresponding oximes with a purity of 95 to 99%. E and Z stereoisomers of the oximes were obtained and separated by GC-MS. During GC analysis, the high temperature in the injector was shown to cause partial dehydratation of oximes and the resulting nitriles were readily identified. Based on FT-IR spectroscopy, that revealed the high stability and low volatility of these compounds, the so-obtained oximes could be useful for future biological studies.

  20. An attenuated total reflection Fourier transform infrared (ATR FT-IR) spectroscopic study of gas adsorption on colloidal stearate-capped ZnO catalyst substrate.

    Science.gov (United States)

    Silverwood, Ian P; Keyworth, Colin W; Brown, Neil J; Shaffer, Milo S P; Williams, Charlotte K; Hellgardt, Klaus; Kelsall, Geoff H; Kazarian, Sergei G

    2014-01-01

    Attenuated total reflection Fourier transform infrared (ATR FT-IR) spectroscopy has been applied in situ to study gas adsorption on a colloidal stearate-capped zinc oxide (ZnO) surface. Infrared spectra of a colloidal stearate-capped ZnO catalyst substrate were assigned at room temperature using zinc stearate as a reference compound. Heating was shown to create a monodentate species that allowed conformational change to occur, leading to altered binding geometry of the stearate ligands upon cooling. CO2 and H2 adsorption measurements demonstrated that the ligand shell was permeable and did not cover the entire surface, allowing adsorption and reaction with at least some portion of the ZnO surface. It has been demonstrated that stearate ligands did not prevent the usual chemisorption processes involved in catalytic reactions on a model ZnO catalyst system, yet the ligand-support system is dynamic under representative reaction conditions.

  1. FT-IR studies on the conformation and effective head-group area of AOT molecules in W/O microemulsions

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Using Fourier transform infrared(FT-IR) spectroscopy technique, the carbonyl stretching vibration bands of AOT in sodium bis(2-ethylhexyl)sulfosuccinate(AOT)/isooctane/water reverse(W/O) microemulsions system have been investigated by least square curve fitting. The results indicate that an asymmetric adsorbed peak of carbonyl stretching vibration of AOT molecule is situated in(1739 ± 1) and(1725 ± 2) cm-1. The two peaks correspond to different carbonyls in gau-che conformation and trans conformation of AOT molecules, respectively. With different water contents(W0), the variations of peak intensity ratio(Ir1 = I1739/I1725) reflect the change of the ratio for the two conformation populations and the variations of the effective head-group area of AOT mo-lecule have relations to the ratio of two conformation populations.

  2. X-ray, FT-IR, NMR and PM5 structural studies and antibacterial activity of unexpectedly stable salinomycin-benzotriazole intermediate ester

    Science.gov (United States)

    Huczyński, Adam; Janczak, Jan; Antoszczak, Michał; Stefańska, Joanna; Brzezinski, Bogumil

    2012-08-01

    The unexpectedly stable benzotriazole ester of salinomycin (SAL-HOBt) - an intermediate product of the amidation reaction of salinomycin has been isolated and structurally characterised (using a single crystal) by X-ray, FT-IR, NMR and semiempirical methods. The results of the X-ray and spectroscopic studies demonstrated that this intermediate ester exist in the solid state and in solution exclusively as the stable O-acyl form. The molecular structure of SAL-HOBt is stabilised by relatively weak intramolecular hydrogen bonds. The PM5 calculation of possible structures of SAL-HOBt has shown that the O-acyl form is more energetically favourable than its N-oxide-N-acyl isomers. The antimicrobial tests show that SAL-HOBt is active against Gram-positive bacteria and clinical isolates methicillin-resistant Staphylococcus aureus (MIC = 1-2 μg/ml).

  3. FT-IR spectroscopy, scanning electron microscopy and porosity measurements to determine the firing temperature of ancient megalithic period potteries excavated at Adichanallur in Tamilnadu, South India

    Science.gov (United States)

    Velraj, G.; Ramya, R.; Hemamalini, R.

    2012-11-01

    Scientific examination of archaeological pottery mainly aims to determine the style of production and the techniques involved in its manufacture. Technological characterization includes the evaluation of the original firing conditions. Maximum firing temperatures may be evaluated by firing clays of compositions similar to those used for the production of the ancient objects. In the present work, some of the ancient pottery samples were collected from recently excavated site at Adichanallur, Tirunelveli District, Tamilnadu, India to estimate the firing temperature of the pottery samples and atmosphere prevailed at the time of manufacturing those potteries by the ancient artisans. From the Fourier transform infrared spectra of the samples the lower limit of firing temperature have been determined. The upper limit of firing temperature was evaluated by porosimetry method. The scanning electron microscopic analysis is used to narrow down the range of firing temperature and the results are consistent with the results obtained from FT-IR spectroscopic study and porosimetry method.

  4. Revealing the Nature and Distribution of Metal Carboxylates in Jackson Pollock's Alchemy (1947) by Micro-Attenuated Total Reflection FT-IR Spectroscopic Imaging.

    Science.gov (United States)

    Gabrieli, Francesca; Rosi, Francesca; Vichi, Alessandra; Cartechini, Laura; Pensabene Buemi, Luciano; Kazarian, Sergei G; Miliani, Costanza

    2017-01-17

    Protrusions, efflorescence, delamination, and opacity decreasing are severe degradation phenomena affecting oil paints with zinc oxide, one of the most common white pigments of the 20th century. Responsible for these dramatic alterations are the Zn carboxylates (also known as Zn soaps) originated by the interaction of the pigment and the fatty acids resulting from the hydrolysis of glycerides in the oil binding medium. Despite their widespread occurrence in paintings and the growing interest of the scientific community, the process of formation and evolution of Zn soaps is not yet fully understood. In this study micro-attenuated total reflection (ATR)-FT-IR spectroscopic imaging was required for the investigation at the microscale level of the nature and distribution of Zn soaps in the painting Alchemy by J. Pollock (1947, Peggy Guggenheim Collection, Venice) and for comparison with artificially aged model samples. For both actual samples and models, the role of AlSt(OH)2, a jellifying agent commonly added in 20th century paint tube formulations, proved decisive for the formation of zinc stearate-like (ZnSt2) soaps. It was observed that ZnSt2-like soaps first form around the added AlSt(OH)2 particles and then eventually grow within the whole painting stratigraphy as irregularly shaped particles. In some of the Alchemy samples, and diversely from the models, a peculiar distribution of ZnSt2 aggregates arranged as rounded and larger particles was also documented. Notably, in one of these samples, larger agglomerates of ZnSt2 expanding toward the support of the painting were observed and interpreted as the early stage of the formation of internal protrusions. Micro-ATR-FT-IR spectroscopic imaging, thanks to a very high chemical specificity combined with high spatial resolution, was proved to give valuable information for assessing the conservation state of irreplaceable 20th century oil paintings, revealing the chemical distribution of Zn soaps within the paint

  5. Risk assessment of an old landfill regarding the potential of gaseous emissions--a case study based on bioindication, FT-IR spectroscopy and thermal analysis.

    Science.gov (United States)

    Tintner, Johannes; Smidt, Ena; Böhm, Katharina; Matiasch, Lydia

    2012-12-01

    Risk assessment of two sections (I and II) of an old landfill (ALH) in Styria (Austria) in terms of reactivity of waste organic matter and the related potential of gaseous emissions was performed using conventional parameters and innovative tools to verify their effectiveness in practice. The ecological survey of the established vegetation at the landfill surface (plant sociological relevés) indicated no relevant emissions over a longer period of time. Statistical evaluation of conventional parameters reveals that dissolved organic carbon (DOC), respiration activity (RA(4)), loss of ignition (LOI) and total inorganic carbon (TIC) mostly influence the variability of the gas generation sum (GS(21)). According to Fourier Transform Infrared (FT-IR) spectral data and the results of the classification model the reactivity potential of the investigated sections is very low which is in accordance with the results of plant sociological relevés and biological tests. The interpretation of specific regions in the FT-IR spectra was changed and adapted to material characteristics. Contrary to mechanically-biologically treated (MBT) materials, where strong aliphatic methylene bands indicate reactivity, they are rather assigned to the C-H vibrations of plastics in old landfill materials. This assumption was confirmed by thermal analysis and the characteristic heat flow profile of plastics containing landfill samples. Therefore organic carbon contents are relatively high compared to other stable landfills as shown by a prediction model for TOC contents based on heat flow profiles and partial least squares regression (PLS-R). The stability of the landfill samples, expressed by the relation of CO(2) release and enthalpies, was compared to unreactive landfills, archeological samples, earthlike materials and hardly degradable organic matter. Due to the material composition and the aging process the landfill samples are located between hardly degradable, but easily combustible

  6. Identification of authentic and adulterated Aquilariae Lignum Resinatum by Fourier transform infrared (FT-IR) spectroscopy and two-dimensional correlation analysis

    Science.gov (United States)

    Qu, Lei; Chen, Jian-bo; Zhou, Qun; Zhang, Gui-jun; Sun, Su-qin; Guo, Yi-zhen

    2016-11-01

    As a kind of expensive perfume and valuable herb, the commercial Aquilariae Lignum Resinatum (ALR) is often adulterated for economic motivations. In this research, Fourier transform infrared (FT-IR) spectroscopy and two-dimensional (2D) correlation analysis are employed to establish a simple and quick identification method for the authentic and adulterated ALR. In the conventional infrared spectra, the standard ALR has a strong peak at 1658 cm-1 referring to the conjugated carbonyl of resin, while this peak is absent in the adulterated samples. The position, intensity, and shape of the auto-peaks and cross-peaks of the authentic and adulterated ALR are much different in the synchronous 2D correlation spectra with thermal perturbation. In the range of 1700-1500 cm-1, the standard ALR has four obvious auto-peaks, while the strongest one is at 1659 cm-1. The adulterated sample w-1 has three obvious auto-peaks and the strongest one is at 1647 cm-1. The adulterated sample w-2 has three obvious auto-peaks and the strongest one is at 1519 cm-1. The adulterated sample w-3 has four obvious auto-peaks and the strongest one is at 1690 cm-1. The above auto-peaks confirm that the standard ALR contains a certain content of resin compounds, while the three counterfeits contain little or different resins. The results show the potential of FT-IR spectroscopy and 2D correlation analysis in the simple and quick identification of authentic and adulterated ALR.

  7. Correcting the effect of refraction and dispersion of light in FT-IR spectroscopic imaging in transmission through thick infrared windows.

    Science.gov (United States)

    Chan, K L Andrew; Kazarian, Sergei G

    2013-01-15

    Transmission mode is one of the most common sampling methods for FT-IR spectroscopic imaging because the spectra obtained generally have a reasonable signal-to-noise ratio. However, dispersion and refraction of infrared light occurs when samples are sandwiched between infrared windows or placed underneath a layer of liquid. Dispersion and refraction cause infrared light to focus with different focal lengths depending on the wavelength (wavenumber) of the light. As a result, images obtained are in focus only at a particular wavenumber while they are defocused at other wavenumber values. In this work, a solution to correct this spread of focus by means of adding a lens on top of the infrared transparent window, such that a pseudo hemisphere is formed, has been investigated. Through this lens (or pseudo hemisphere), refraction of light is removed and the light across the spectral range has the same focal depth. Furthermore, the lens acts as a solid immersion objective and an increase of both magnification and spatial resolution (by 1.4 times) is demonstrated. The spatial resolution was investigated using an USAF resolution target, showing that the Rayleigh criterion can be achieved, as well as a sample with a sharp polymer interface to indicate the spatial resolution that can be expected in real samples. The reported approach was used to obtain chemical images of cross sections of cancer tissue and hair samples sandwiched between infrared windows showing the versatility and applicability of the method. In addition to the improved spatial resolution, the results reported herein also demonstrate that the lens can reduce the effect of scattering near the edges of tissue samples. The advantages of the presented approach, obtaining FT-IR spectroscopic images in transmission mode with the same focus across all wavenumber values and simultaneous improvement in spatial resolution, will have wide implications ranging from studies of live cells to sorption of drugs into tissues.

  8. Nutritional, phytochemical and antioxidant evaluation and FT-IR analysis of freeze dried extracts of Ecballium elaterium fruit juice from three localities

    Directory of Open Access Journals (Sweden)

    Samir FELHI

    2016-01-01

    Full Text Available Abstract This study was designed to investigate chemical composition, the total phenolic content, flavonoid content, antioxidant activity and to analyze through FT-IR spectroscopy method the freeze-dried extract of Ecballium elaterium fruit from three different localities. The highest level of phenolic and flavonoid contents was recorded for the fruit juice from the Cap-Bon region, with 106.4 ± 0.4 mg GAE/g and 6.5 ± 0.2 mg QE/g, respectively. Antioxidant activity varied in dose-dependent manner with IC50 values for DPPH scavenging of the freeze-dried fruit juice extracts from Cap-Bon, Kef and Sidi Bouzid were 38.6 ± 0.2, 50.1 ± 0.7, and 50.7 ± 0.2 µg/mL, respectively. The results from the FRAP test showed that the freeze-dried extracts of Cap-Bon exhibited potent activity, followed by those from Kef and Sidi Bouzid. Similar trend were revealed for ABTS•+ test, with the fruit juice extract from Cap-Bon (IC50 = 0.6 ± 0.0 mg/mL. Furthermore, a good positive correlation was observed between the total phenols and three assays, especially DPPH. The freeze-dried extracts of fruit juice from Cap-Bon showed strong ability to act as antioxidants and can be considered as promising natural source of bioactive compounds. FT-IR analysis of each freeze-dried extract confirmed its richness on polyphenols and biological active functional groups.

  9. Automated Fast Screening Method for Cocaine Identification in Seized Drug Samples Using a Portable Fourier Transform Infrared (FT-IR) Instrument.

    Science.gov (United States)

    Mainali, Dipak; Seelenbinder, John

    2016-05-01

    Quick and presumptive identification of seized drug samples without destroying evidence is necessary for law enforcement officials to control the trafficking and abuse of drugs. This work reports an automated screening method to detect the presence of cocaine in seized samples using portable Fourier transform infrared (FT-IR) spectrometers. The method is based on the identification of well-defined characteristic vibrational frequencies related to the functional group of the cocaine molecule and is fully automated through the use of an expert system. Traditionally, analysts look for key functional group bands in the infrared spectra and characterization of the molecules present is dependent on user interpretation. This implies the need for user expertise, especially in samples that likely are mixtures. As such, this approach is biased and also not suitable for non-experts. The method proposed in this work uses the well-established "center of gravity" peak picking mathematical algorithm and combines it with the conditional reporting feature in MicroLab software to provide an automated method that can be successfully employed by users with varied experience levels. The method reports the confidence level of cocaine present only when a certain number of cocaine related peaks are identified by the automated method. Unlike library search and chemometric methods that are dependent on the library database or the training set samples used to build the calibration model, the proposed method is relatively independent of adulterants and diluents present in the seized mixture. This automated method in combination with a portable FT-IR spectrometer provides law enforcement officials, criminal investigators, or forensic experts a quick field-based prescreening capability for the presence of cocaine in seized drug samples.

  10. Estudo de coprólito da bacia sedimentar do Araripe por meios de espectroscopia FT-IR e difração de Raios-X Study of coprolites from the Araripe sedimentary basin through FT-IR spectroscopy and x-ray diffraction

    Directory of Open Access Journals (Sweden)

    Ricardo Jorge Cruz Lima

    2007-01-01

    Full Text Available Coprolites are fossilized faeces that constitute an important source of palaeobiological informations. This paper describes the characterization of some coprolite materials originated from the Romualdo Member of the Santana Formation (Araripe Basin, south of Ceará State in Brazil by means of two techniques: X-ray powder diffraction and Fourier transform infrared spectroscopy (FT-IR. This characterization allowed us to determine the main composition of the coprolites, of the nodulus (where the coprolites were extracted and of the sediment (where the nodulus was found suggesting that the material was produced by a carnivorous fish of the Lower Cretaceous.

  11. One new and six known triterpene xylosides from Cimicifuga racemosa: FT-IR, Raman and NMR studies and DFT calculations

    Science.gov (United States)

    Jamróz, Marta K.; Jamróz, Michał H.; Cz. Dobrowolski, Jan; Gliński, Jan A.; Gleńsk, Michał

    One new and six known triterpene xylosides were isolated from Cimicifuga racemosa (black cohosh, Actaea racemosa). The structure of a new compound, designated as isocimipodocarpaside (1), was established to be (24S)-3β-hydroxy-24,25-oxiirane-16,23-dione-9,10-seco-9,19-cyclolanost-1(10),7(8),9(11)-trien 3-O-β-D-xylopyranoside, by means of 1H and 13C NMR, IR and Raman spectroscopies and Mass Spectrometry. The six known compounds are: 23-epi-26-deoxycimicifugoside (2), 23-epi-26-deoxyactein (3), 25-anhydrocimigenol xyloside (4), 23-O-acetylshengmanol xyloside (5), 25-O-acetylcimigenol xyloside (6) and 3'-O-acetylcimicifugoside H-1 (7). On the basis of NMR data supported by DFT calculations of NMR shielding constants of (2), its structure, previously described as 26-deoxycimicifugoside was corrected and determined as 23-epi-26-deoxycimicifugoside. The 13C CPMAS NMR spectra of the studied compounds (1)-(7) provided data on their solid-state interactions. The IR and Raman spectra in the Cdbnd O, Cdbnd C, and Csbnd H stretching vibration regions clearly discriminate different triterpenes found in C. racemosa.

  12. Quantitative analysis of surface amine groups on plasma-polymerized ethylenediamine films using UV-visible spectroscopy compared to chemical derivatization with FT-IR spectroscopy, XPS and TOF-SIMS

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jinmo [Department of Physics, Brain Korea 21 Physics Research Division and Institute of Basic Science, Sungkyunkwan University (SKKU), Suwon 440-746 (Korea, Republic of); Division of Advanced Technology, Korea Research Institute of Standards and Science (KRISS), Daejeon 305-600 (Korea, Republic of); Jung, Donggeun [Department of Physics, Brain Korea 21 Physics Research Division and Institute of Basic Science, Sungkyunkwan University (SKKU), Suwon 440-746 (Korea, Republic of); Park, Yongsup [Division of Advanced Technology, Korea Research Institute of Standards and Science (KRISS), Daejeon 305-600 (Korea, Republic of); Kim, Yongki [Department of Physics, Brain Korea 21 Physics Research Division and Institute of Basic Science, Sungkyunkwan University (SKKU), Suwon 440-746 (Korea, Republic of); Division of Advanced Technology, Korea Research Institute of Standards and Science (KRISS), Daejeon 305-600 (Korea, Republic of); Moon, Dae Won [Division of Advanced Technology, Korea Research Institute of Standards and Science (KRISS), Daejeon 305-600 (Korea, Republic of); Lee, Tae Geol [Division of Advanced Technology, Korea Research Institute of Standards and Science (KRISS), Daejeon 305-600 (Korea, Republic of)]. E-mail: tglee@kriss.re.kr

    2007-02-28

    A quantitative analysis of the surface density of amine groups on a plasma-polymerized ethylenediamine thin film deposited on a platinum surface using inductively coupled plasma chemical vapor deposition method is described. UV-visible spectroscopy together with a chemical derivatization technique using Fourier transform infrared (FT-IR) spectroscopy was used to obtain the quantitative information. Chemical tags of pentafluorobenzaldehyde were hybridized with the surface amine groups and were easily detected due to the characteristic absorption bands of C-F stretching, aromatic ring and C=N stretching vibrations in the reflection-absorption FT-IR spectra. The surface amine density was reproducibly controlled as a function of deposition plasma power and quantified using UV-visible spectroscopy. A good linear correlation was observed between the FT-IR intensities of the characteristic absorption bands and the surface amine densities, suggesting the possibility of using this chemical derivatization technique to quantify the surface densities of specific functional groups on an organic surface. Chemical derivatization was also used with X-ray photoelectron spectroscopy on the same samples, and the results were compared with those obtained from FT-IR and time-of-flight secondary ion mass spectrometry. Although each analysis technique has different probing depths from the surface, the three different data sets obtained from the chemical tags correlated well with each other since each analysis technique measured the chemical tags on the sample surface.

  13. Pyrolysis Mechanism of Sawdust Based on TG-FT IR Analysis%基于TG-FT IR分析的木屑热解机理

    Institute of Scientific and Technical Information of China (English)

    顾晓利; 马旭; 李丽鲜; 程康华; 李忠正; 肖睿

    2013-01-01

    Pyrolysis of certain sawdust was studied by using thermogravimetric analyzer coupled with Fourier transform infrared spectroscopy (TG-FT IR). The dynamics parameters of sawdust pyrolysis were calculated by the methods of Kissinger and Ozawa, respectively. Large-scale experiment of sawdust pyrolysis was conducted in the fixed bed device. With different heating rates and at the final temperature of 950℃ , a total loss mass fraction of 77% -83% was observed. The temperature trend of evolving gaseous products, such as CH4 , CO and CO2 was investigated. At a temperature above 200°C , the pyrolysis of sawdust was clearly accelerated and the maximum temperature corresponding to the pyrolysis shifted to high temperature with the increase of heating rates. The activation energy of sawdust was of 130. 14 and 133. 21 kJ/mol, respectively, and the frequency factor(lnA) of 26. 28 and 26. 47 min-1 calculated by Kissinger and Ozawa methods. The optimal sawdust pyrolysis temperature was above 700℃ with CO, CO2 , CH4 and H2 as the main pyrolysis products. With the increase of temperature, the volume fraction of CO decreased rapidly while the volume fraction of H2 increased evidently, and the volume fractions of CO2 and CH4 maintained relatively unchanged during the pyrolysis. The results obtained by the experiment in  fixed bed device were consistent with the results of TG-FT IR experiment.%采用热重-红外联用(TG-FT IR)方法考察了木屑的热解规律,选择Kissinger和Ozawa 2种算法对木屑热解动力学参数进行估算,并采用固定床实验装置考察了木屑热解反应温度对产物分布的影响.结果表明,在不同升温速率及热解终温为950℃的热解条件下,木屑底物的失重率维持在77%~83%,且热解产物以气相产物为主,包括CO2、CH4、CO等;当温度高于200℃时,底物出现明显的热解过程,最高失重率下对应的温度随着升温速率的增加而升高.Kissinger和Ozawa 2种算法得出木屑

  14. Cysteine, thiourea and thiocyanate interactions with clays: FT-IR, Mössbauer and EPR spectroscopy and X-ray diffractometry studies.

    Science.gov (United States)

    de Santana, Henrique; Paesano, Andrea; da Costa, Antonio C S; di Mauro, Eduardo; de Souza, Ivan G; Ivashita, Flávio F; de Souza, Cláudio M D; Zaia, Cássia T B V; Zaia, Dimas A M

    2010-04-01

    The present study examined the adsorption of cysteine, thiourea and thiocyanate on bentonite and montmorillonite at two different pHs (3.00, 8.00). The conditions used here are closer to those of prebiotic earth. As shown by FT-IR, Mössbauer and EPR spectroscopy and X-ray diffractometry, the most important finding of this work is that cysteine and thiourea penetrate into the interlayer of the clays and reduce Fe(3+) to Fe(2+), and as consequence, cystine and c,c'-dithiodiformamidinium ion are formed. This mechanism resembles that which occurs with aconitase. This is a very important result for prebiotic chemistry; we should think about clays not just sink of molecules, but as primitive vessels of production of biomolecules. At pH 8.00, an increasing expansion was observed in the following order for both minerals: thiourea > thiocyanate > cysteine. At pH 3.00, the same order was not observed and thiourea had an opposite behavior, being the compound producing the lowest expansion. Mössbauer spectroscopy showed that at pH 8.00, the proportion of Fe(2+) ions in bentonite increased, doubling for thiourea, or more than doubling for cysteine, in both clays. However, at pH 3.00, cysteine and thiourea did not change significantly the relative amount of Fe(2+) and Fe(3+) ions, when compared to clays without adsorption. For thiocyanate, the amount of Fe(2+) produced was independent of the pH or clay used, probably because the interlayers of clays are very acidic and HSCN formed does not reduce Fe(3+) to Fe(2+). For the interaction of thiocyanate with the clays, it was not possible to identify any potential compound formed. For the samples of bentonite and montmorillonite at pH 8.00 with cysteine, EPR spectroscopy showed that intensity of the lines due to Fe(3+) decreased because the reaction of Fe(3+)/cysteine. Intensity of EPR lines did not change when the samples of bentonite at pH 3.00 with and without cysteine were compared. These results are in accordance with those

  15. Physicochemical characterization by AFM, FT-IR and DSC and biological assays of a promising antileishmania delivery system loaded with a natural Brazilian product.

    Science.gov (United States)

    Marquele-Oliveira, Franciane; Torres, Elina Cassia; Barud, Hernane da Silva; Zoccal, Karina Furlani; Faccioli, Lúcia Helena; Hori, Juliana I; Berretta, Andresa Aparecida

    2016-05-10

    The control and treatment of Leishmaniasis, a neglected and infectious disease affecting approximately 12 million people worldwide, are challenging. Leishmania parasites multiply intracellularly within macrophages located in deep skin and in visceral tissues, and the currently employed treatments for this disease are subject to significant drawbacks, such as resistance and toxicity. Thus, the search for new Leishmaniasis treatments is compulsory, and Ocotea duckei Vattimo, a plant-derived product from the biodiverse Brazilian flora, may be a promising new treatment for this disease. In this regard, the aim of this work was to develop and characterize a delivery system based on solid lipid nanoparticles (SLN) that contain the liposoluble lignan fraction (LF) of Ocotea duckei Vattimo, which targets the Leishmania phagolysosome of infected macrophages. LF-loaded SLNs were obtained via the hot microemulsion method, and their physical and chemical properties were comprehensively assessed using PCS, AFM, SEM, FT-IR, DSC, HPLC, kinetic drug release studies, and biological assays. The size of the developed delivery system was 218.85±14.2 nm, its zeta potential was -30 mV and its entrapment efficiency (EE%) was high (the EEs% of YAN [yangambin] and EPI-YAN [epi-yangambin] markers were 94.21±0.40% and 94.20±0.00%, respectively). Microscopy, FT-IR and DSC assays confirmed that the delivery system was nanosized and indicated a core-shell encapsulation model, which corroborated the measured kinetics of drug release. The total in vitro release rates of YAN and EPI-YAN in buffer (with sink conditions attained) were 29.6±8.3% and 34.3±8.9%, respectively, via diffusion through the cellulose acetate membrane of the SLN over a period of 4 h. After 24 h, the release rates of both markers reached approximately 45%, suggesting a sustained pattern of release. Mathematical modeling indicated that both markers, YAN and EPI-YAN, followed matrix diffusion-based release kinetics (Higuchi

  16. 14NH_3 Line Positions and Intensities in the Far-Infrared Comparison of Ft-Ir Measurements to Empirical Hamiltonian Model Predictions

    Science.gov (United States)

    Sung, Keeyoon; Yu, Shanshan; Pearson, John; Pirali, Olivier; Kwabia Tchana, F.; Manceron, Laurent

    2016-06-01

    We have analyzed multiple spectra of high purity (99.5%) normal ammonia sample recorded at room temperatures using the FT-IR and AILES beamline at Synchrotron SOLEIL, France. More than 2830 line positions and intensities are measured for the inversion-rotation and rovibrational transitions in the 50 - 660 wn region. Quantum assignments were made for 2047 transitions from eight bands including four inversion-rotation bands (gs(a-s), νb{2}(a-s), 2νb{2}(a-s), and νb{4}(a-s)) and four ro-vibrational bands (νb{2} - gs, 2νb{2} - gs, νb{4} - νb{2}, and 2νb{2} -νb{4}), as well as covering more than 300 lines of ΔK = 3 forbidden transitions. Out of the eight bands, we note that 2νb{2} - νb{4} has not been listed in the HITRAN 2012 database. The measured line positions for the assigned transitions are in an excellent agreement (typically better than 0.001 wn) with the predictions from the empirical Hamiltonian model [S. Yu, J.C. Pearson, B.J. Drouin, et al.(2010)] in a wide range of J and K for all the eight bands. The comparison with the HITRAN 2012 database is also satisfactory, although systematic offsets are seen for transitions with high J and K and those from weak bands. However, differences of 20% or so are seen in line intensities for allowed transitions between the measurements and the model predictions, depending on the bands. We have also noticed that most of the intensity outliers in the Hamiltonian model predictions belong to transitions from gs(a-s) band. We present the final results of the FT-IR measurements of line positions and intensities, and their comparisons to the model predictions and the HITRAN 2012 database. Research described in this paper was performed at the Jet Propulsion Laboratory and California Institute of Technology, under contracts and cooperative agreements with the National Aeronautics and Space Administration.

  17. Investigation of the Changes in Surface Area and FT-IR Spectra of Activated Carbons Obtained from Hazelnut Shells by Physicochemical Treatment Methods

    Directory of Open Access Journals (Sweden)

    Aziz Şencan

    2015-01-01

    Full Text Available In this study, raw hazelnut shells were used to obtain charcoal by pyrolysis at 250°C. The obtained material was subjected to physical, chemical, and physicochemical treatment methods to obtain activated carbons (ACs. Effect of the treatment procedures was determined by measuring the surface area of the produced ACs. In addition, changes in the functional groups of the obtained ACs during these treatments were determined with the Fourier transform infrared spectroscopy (FT-IR. To determine the most effective chemical agent, the charcoal samples were examined for Pb(II adsorption from aqueous solutions under different pH conditions of 4 to 6. According to the results, the most effective chemical agent was determined as Ca(OCl2. Effect of microwave and ultrasound treatments was also examined during Pb(II adsorption by the chemically treated AC. The results showed that chemical treatment with Ca(OCl2, microwave treatment for 5 minutes, ultrasound treatment for 20 minutes, and pyrolysis at 700°C together were the most suitable combination enhancing the surface area of the adsorbent. This combination increased the surface area and the adsorption capacity of the adsorbent by 202 and 4.76 times, respectively, when compared to those of the raw hazelnut shell.

  18. Time-resolved spectral characterization of ring cavity surface emitting and ridge-type distributed feedback quantum cascade lasers by step-scan FT-IR spectroscopy.

    Science.gov (United States)

    Brandstetter, Markus; Genner, Andreas; Schwarzer, Clemens; Mujagic, Elvis; Strasser, Gottfried; Lendl, Bernhard

    2014-02-10

    We present the time-resolved comparison of pulsed 2nd order ring cavity surface emitting (RCSE) quantum cascade lasers (QCLs) and pulsed 1st order ridge-type distributed feedback (DFB) QCLs using a step-scan Fourier transform infrared (FT-IR) spectrometer. Laser devices were part of QCL arrays and fabricated from the same laser material. Required grating periods were adjusted to account for the grating order. The step-scan technique provided a spectral resolution of 0.1 cm(-1) and a time resolution of 2 ns. As a result, it was possible to gain information about the tuning behavior and potential mode-hops of the investigated lasers. Different cavity-lengths were compared, including 0.9 mm and 3.2 mm long ridge-type and 0.97 mm (circumference) ring-type cavities. RCSE QCLs were found to have improved emission properties in terms of line-stability, tuning rate and maximum emission time compared to ridge-type lasers.

  19. FT-IR product studies on the OH radical and O3 initiated oxidation in gas-phase of the (methyl)-1,2-dihydroxybenzene

    Science.gov (United States)

    Bejan, I.; Olariu, R.; Barnes, I.; Mocanu, R.

    2003-04-01

    In the atmosphere, phenols are produced in the reactions of OH with BTX (benzene, toluene, xylene isomers) in substantial yields, benzene producing phenol, toluene a mixture of o-, m- and p-cresols and the xylene isomers a series of hydroxydimethylbenzenes. Recent product studies in Wuppertal have shown that the major products in the OH-radical initiated oxidation of phenols are benzenediols (1,2-dihydroxybenzenes). Apart from rate constants for the reactions of OH radicals, NO_3 radicals and O_3 with these compounds, nothing is presently known about the atmospheric chemistry of 1,2-benzenediols. In a systematic study of the gas phase atmospheric chemistry of these dihydroxy compounds, we present here preliminary results from studies on their products with OH radicals. The studies at Wuppertal on the reaction of the benzenediols with OH in a large volum photoreactor using the FT-IR technique indicate the formation of maleic anhydride (2,4-furandione) with a yield between 5-10% and an unknown ketene product in the reaction system. Preliminary studies on the products formed from the reaction of O_3 with 1,2-dihydroxybenzenes will also be presented.

  20. Copper Enhanced Monooxygenase Activity and FT-IR Spectroscopic Characterisation of Biotransformation Products in Trichloroethylene Degrading Bacterium: Stenotrophomonas maltophilia PM102

    Directory of Open Access Journals (Sweden)

    Piyali Mukherjee

    2013-01-01

    Full Text Available Stenotrophomonas maltophilia PM102 (NCBI GenBank Acc. no. JQ797560 is capable of growth on trichloroethylene as the sole carbon source. In this paper, we report the purification and characterisation of oxygenase present in the PM102 isolate. Enzyme activity was found to be induced 10.3-fold in presence of 0.7 mM copper with a further increment to 14.96-fold in presence of 0.05 mM NADH. Optimum temperature for oxygenase activity was recorded at 36∘C. The reported enzyme was found to have enhanced activity at pH 5 and pH 8, indicating presence of two isoforms. Maximum activity was seen on incubation with benzene compared to other substrates like TCE, chloroform, toluene, hexane, and petroleum benzene. Km and Vmax for benzene were 3.8 mM and 340 U/mg/min and those for TCE were 2.1 mM and 170 U/mg/min. The crude enzyme was partially purified by ammonium sulphate precipitation followed by dialysis. Zymogram analysis revealed two isoforms in the 70% purified enzyme fraction. The activity stain was more prominent when the native gel was incubated in benzene as substrate in comparison to TCE. Crude enzyme and purified enzyme fractions were assayed for TCE degradation by the Fujiwara test. TCE biotransformation products were analysed by FT-IR spectroscopy.

  1. Proteolytically-induced changes of secondary structural protein conformation of bovine serum albumin monitored by Fourier transform infrared (FT-IR) and UV-circular dichroism spectroscopy

    Science.gov (United States)

    Güler, Günnur; Vorob'ev, Mikhail M.; Vogel, Vitali; Mäntele, Werner

    2016-05-01

    Enzymatically-induced degradation of bovine serum albumin (BSA) by serine proteases (trypsin and α-chymotrypsin) in various concentrations was monitored by means of Fourier transform infrared (FT-IR) and ultraviolet circular dichroism (UV-CD) spectroscopy. In this study, the applicability of both spectroscopies to monitor the proteolysis process in real time has been proven, by tracking the spectral changes together with secondary structure analysis of BSA as proteolysis proceeds. On the basis of the FTIR spectra and the changes in the amide I band region, we suggest the progression of proteolysis process via conversion of α-helices (1654 cm- 1) into unordered structures and an increase in the concentration of free carboxylates (absorption of 1593 and 1402 cm- 1). For the first time, the correlation between the degree of hydrolysis and the concentration of carboxylic groups measured by FTIR spectroscopy was revealed as well. The far UV-CD spectra together with their secondary structure analysis suggest that the α-helical content decreases concomitant with an increase in the unordered structure. Both spectroscopic techniques also demonstrate that there are similar but less spectral changes of BSA for the trypsin attack than for α-chymotrypsin although the substrate/enzyme ratio is taken the same.

  2. A unique manganese (II) complex of 4-methoxy-pyridine-2-carboxylate: Synthesis, crystal structure, FT-IR and UV-Vis spectra and DFT calculations

    Science.gov (United States)

    Tamer, Ömer

    2017-09-01

    The first metal complex of 4-Methoxy-pyridine-2-carboxylic acid, [Mn(4-mpic)2(H2O)2], has been synthesized, and its crystal structure has been determined by X-Ray diffraction method. The FT-IR spectrum for [Mn(4-mpic)2(H2O)2] complex has been presented in this paper, as compared with that of single 4-mpic ligand. The electronic absorption spectrum recorded in DMSO solvent revealed that the ligand metal charge transfer (LMCT) interactions occur in Mn(II) complex. In order to support experimental results, density functional theory (DFT) calculations have been also carried out with the hybrid B3LYP functional. The coordination sphere of central Mn(II) ion has been evaluated by using the hyperconjugative interactions between the lone pair electrons of metal and donor atoms (N and O). The natural charge of Mn(II) ion demonstrated that the electronic transitions from metal ion to 4-mpic are higher than those in reverse direction. The carboxylate group has been determined as the most reactive side of Mn(II) complex in chemical reactions. A comparison among Mulliken, NBO and APT charges has been carried out for Mn(II) complex system. The first static hyperpolarizability parameter for Mn(II) complex has been also investigated by using B3LYP level.

  3. Tianeptine, olanzapine and fluoxetine show similar restoring effects on stress induced molecular changes in mice brain: An FT-IR study

    Science.gov (United States)

    Türker-Kaya, Sevgi; Mutlu, Oğuz; Çelikyurt, İpek K.; Akar, Furuzan; Ulak, Güner

    2016-05-01

    Chronic stress which can cause a variety of disorders and illness ranging from metabolic and cardiovascular to mental leads to alterations in content, structure and dynamics of biomolecules in brain. The determination of stress-induced changes along with the effects of antidepressant treatment on these parameters might bring about more effective therapeutic strategies. In the present study, we investigated unpredictable chronic mild stress (UCMS)-induced changes in biomolecules in mouse brain and the restoring effects of tianeptine (TIA), olanzapine (OLZ) and fluoxetine (FLX) on these variations, by Fourier transform infrared (FT-IR) spectroscopy. The results revealed that chronic stress causes different membrane packing and an increase in lipid peroxidation, membrane fluidity. A significant increment for lipid/protein, Cdbnd O/lipid, CH3/lipid, CH2/lipid, PO-2/lipid, COO-/lipid and RNA/protein ratios but a significant decrease for lipid/protein ratios were also obtained. Additionally, altered protein secondary structure components were estimated, such as increment in random coils and beta structures. The administration of TIA, OLZ and FLX drugs restored these stress-induced variations except for alterations in protein structure and RNA/protein ratio. This may suggest that these drugs have similar restoring effects on the consequences of stress activity in brain, in spite of the differences in their action mechanisms. All findings might have importance in understanding molecular mechanisms underlying chronic stress and contribute to studies aimed for drug development.

  4. Application of experimental design in examination of the dissolution rate of carbamazepine from formulations: Characterization of the optimal formulation by DSC, TGA, FT-IR and PXRD analysis

    Directory of Open Access Journals (Sweden)

    Krstić Marko

    2015-01-01

    Full Text Available Poor solubility is one of the key reasons for the poor bioavailability of these drugs. This paper displays a formulation of a solid surfactant system with carbamazepine, in order to increase its dissolution rate. Solid state surfactant systems are formed by application of fractal experimental design. Poloxamer 237 and Poloxamer 338 were used as surfactants and Brij® 35 was used as the co-surfactant. The ratios of the excipients and carbamazepine were varied and their effects on the dissolution rate of carbamazepine were examined. Moreover, the effects of the addition of natural (diatomite and a synthetic adsorbent carrier (Neusiline UFL2 on the dissolution rate of carbamazepine were also tested. The prepared surfactant systems were characterized and the influence of the excipients on possible changes of the polymorphous form of carbamazepine examined by application of analytical techniques (DSC, TGA, FT-IR, PXRD. It was determined that an appropriate selection of the excipient type and ratio could provide a significant increase in the carbamazepine dissolution rate. By application of analytical techniques, it was found that that the employed excipients induce a transition of carbamazepine into the amorphous form and that the selected sample was stable for three months, when kept under ambient conditions. [Projekat Ministarstva nauke Republike Srbije, br. TR34007

  5. DFT studies on antioxidant mechanisms, electronic properties, spectroscopic (FT-IR and UV) and NBO analysis of C-glycosyl flavone, an isoorientin

    Science.gov (United States)

    Deepha, V.; Praveena, R.; Sadasivam, K.

    2015-02-01

    The relationship between structure and electronic properties of isoorientin, a C-glycoside flavone is investigated to relate its radical scavenging activity using molecular descriptors. To elucidate the antioxidant activity of polyphenolics, three mechanisms namely hydrogen atom transfer (HAT), single electron transfer-proton transfer (SET-PT) and sequential proton-loss electron-transfer (SPLET) are employed. In gas-phase, Osbnd H bond dissociation enthalpies (BDE), ionization potential (IP), proton dissociation enthalpies (PDE), proton affinity (PA) and electron transfer enthalpy (ETE) are computed and correlated relevant to antioxidant potency of the title compound employing DFT/6-311G(d,p) protocol. The theoretically simulated FT-IR and the UV-visible absorption spectra have been compared with the experimental data. Based on the absorbed UV spectra and TD-DFT calculations, assignment of the absorption bands are carried out. In addition, formation of intramolecular hydrogen bond and most possible interaction sites are explained by using natural bond orbital (NBO) analysis.

  6. Determinação por FT-IR de transmissão e reflexão (UATR de etileno e propileno em EPDM

    Directory of Open Access Journals (Sweden)

    Denis Damazio

    2014-12-01

    Full Text Available Foi desenvolvida uma metodologia para a determinação dos teores de etileno (ET e propileno (P em amostras de borracha (elastômero puro, crua e vulcanizada, à base do copolímero de etileno-propileno-dieno monômero (EPDM, por espectroscopia no infravermelho com transformada de Fourier (FT-IR de reflexão total atenuada universal (UATR e de transmissão, sendo as amostras analisadas tal como recebidas ou após pirólise, respectivamente. Embora ambas as técnicas tenham apresentado boa precisão, com a análise UATR sendo mais adequada para o elastômero puro, a realizada por transmissão/pirólise mostrou-se mais adequada à análise de todos os tipos de EPDM (elastômero puro, crua e vulcanizada, podendo ser usada para formulações similares.

  7. Pressure effects on the structure, kinetic, and thermodynamic properties of heat-induced aggregation of protein studied by FT-IR spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Taniguchi, Y [Applied Chemistry Department, Ritsumeikan University, Kusatsu, Shiga 525-8577 (Japan); Okuno, A [Research Department 3, Central Research, Bridgestone Co. Kodaira, Tokyo 187-8531 (Japan); Kato, M, E-mail: taniguti@sk.ritsumei.ac.j [Pharmaceutical Sciences Department, Ritsumeikan University, Kusatsu, Shiga 525-8577 (Japan)

    2010-03-01

    Pressure can retrain the heat-induced aggregation and dissociate the heat-induced aggregates. We observed the aggregation-preventing pressure effect and the aggregates-dissociating pressure effect to characterize the heat-induced aggregation of equine serum albumin (ESA) by FT-IR spectroscopy. The results suggest the {alpha}-helical structure collapses at the beginning of heat-induced aggregation through the swollen structure, and then the rearrangement of structure to the intermolecular {beta}-sheet takes place through partially unfolded structure. We determined the activation volume for the heat-induced aggregation ({Delta}V'' = +93 ml/mol) and the partial molar volume difference between native state and heat-induced aggregates ({Delta}V=+32 ml/mol). This positive partial molar volume difference suggests that the heat-induced aggregates have larger internal voids than the native structure. Moreover, the positive volume change implies that the formation of the intermolecular {beta}-sheet is unfavorable under high pressure.

  8. Using attenuated total reflection Fourier transform infrared spectroscopy (ATR FT-IR) to study the molecular conformation of parchment artifacts in different macroscopic states.

    Science.gov (United States)

    Gonzalez, Lee; Wade, Matthew; Bell, Nancy; Thomas, Kate; Wess, Tim

    2013-02-01

    Maintaining appropriate temperatures and relative humidity is considered essential to extending the useful life of parchment artifacts. Although the relationship between environmental factors and changes to the physical state of artifacts is reasonably understood, an improved understanding of the relationship between the molecular conformation and changes to the macroscopic condition of parchment is needed to optimize environmental conditions. Using Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR FT-IR) analysis, the conformation of the molecular structure in selected parchment samples with specific macroscopic conditions, typically discoloration and planar deformations (e.g., cockling and tearing), have been made. The results of this investigation showed that the Fourier transform infrared signal differs for parchment samples exhibiting different macroscopic conditions. In areas exhibiting planar deformation, a change in the Fourier Transform Infrared signal was observed that indicates unfolding of the molecular conformation. In comparison, the discolored samples showed a change in molecular conformation that indicates a chemical change within the collagen molecular structure. This paper discusses the possible causal associations and implications of these findings for the conservation and preservation of parchment artifacts.

  9. Análise por FT-IR (UATR e PAS de microbicidas em filmes poliméricos de tintas comerciais

    Directory of Open Access Journals (Sweden)

    Ricardo Pedro

    2014-01-01

    Full Text Available Este trabalho mostra a avaliação de duas técnicas de espectroscopia no infravermelho por transformada de Fourier (FT-IR, Universal Reflexão Total Atenuada (UATR e Detecção Fotoacústica (PAS, para a caracterização dos microbicidas, OIT, carbendazim e diuron, mais comuns em tintas acrílicas imobiliárias, levando-se em conta as características de cada técnica de análise de superfície tal como a profundidade de amostragem, sob o aspecto qualitativo. A análise PAS, utilizando-se a velocidade de 0,20 cm.s- 1, mostrou-se a única adequada ao estudo. A presença dos microbicidas na película de tinta seca foi, também, confirmada por meio de análises microbiológicas e HPLC.

  10. Vibrational frequency analysis, FT-IR, DFT and M06-2X studies on tert-Butyl N-(thiophen-2yl)carbamate

    Science.gov (United States)

    Sert, Yusuf; Singer, L. M.; Findlater, M.; Doğan, Hatice; Çırak, Ç.

    2014-07-01

    In this study, the experimental and theoretical vibrational frequencies of a newly synthesized tert-Butyl N-(thiophen-2yl)carbamate have been investigated. The experimental FT-IR (4000-400 cm-1) spectrum of the molecule in the solid phase have been recorded. The theoretical vibrational frequencies and optimized geometric parameters (bond lengths and bond angles) have been calculated by using density functional theory (DFT/B3LYP: Becke, 3-parameter, Lee-Yang-Parr) and DFT/M06-2X (the highly parametrized, empirical exchange correlation function) quantum chemical methods with the 6-311++G(d,p) basis set by Gaussian 09W software, for the first time. The vibrational frequencies have been assigned using potential energy distribution (PED) analysis by using VEDA 4 software. The computational optimized geometric parameters and vibrational frequencies have been found to be in good agreement with the corresponding experimental data, and with related literature results. In addition, the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) energies and the other related molecular energy values have been calculated and are depicted.

  11. Attenuated Total Reflection Fourier Transform Infrared Spectroscopy (ATR FT-IR) Applied to Study the Distribution of Ink Components in Printed Newspapers.

    Science.gov (United States)

    Gómez, Nuria; Molleda, Cristina; Quintana, Ester; Carbajo, José M; Rodríguez, Alejandro; Villar, Juan C

    2016-09-01

    A new method was developed to study how the oil and cyan pigments of cold-set ink are distributed in newspaper thickness. The methodology involved laboratory printing followed by delamination of the printed paper. The unprinted side, printed side, and resulting layers were analyzed using attenuated total reflection Fourier transform infrared spectroscopy (ATR FT-IR). Three commercial newspapers and black and cyan cold-set inks were chosen for the study. Attenuated total reflection Fourier transform infrared spectroscopy enabled the proportion of oil and cyan pigment on the printed surface and throughout the sheet thickness to be measured. Oil percentage was evaluated as the area increment of the region from 2800 cm(-1) to 3000 cm(-1) The relative amount of cyan pigment was determined as the area of the absorption band at 730 cm(-1) The ink oil was found mainly below half the paper thickness, whereas the pigment was detected at the layers closer to the printed surface, at a depth penetration of less than 15 µm (20% of thickness). Distribution of these two components in paper thickness depended on the type of cold-set ink, the amount of ink transferred, and the newspaper properties.

  12. Speciation of organic matter in sandy soil size fractions as revealed by analytical pyrolysis (Py-GC/MS) and FT-IR spectroscopy

    Science.gov (United States)

    Jiménez-Morillo, Nicasio T.; González-Vila, Francisco J.; Jordán, Antonio; Zavala, Lorena M.; de la Rosa, José M.; González-Pérez, José A.

    2015-04-01

    This research deals with the assessment of organic matter structural differences in soil physical fractions before and after lipid extractions. Soil samples were collected in sandy soils, Arenosols (WRB 2006) from the Doñana National Park (SW Spain) under different vegetation cover: cork oak (Quercus suber, QS), eagle fern (Pteridium aquilinum, PA), pine (Pinus pinea, PP) and rockrose (Halimium halimifolium, HH). Two size fractions; coarse (C: 1-2 mm) and fine (F: 0.05-0.25 mm) were studied from each soil. . In addition, the two fractions from each soil were exhaustively Soxhlet extracted with a Dichlorometane-Methanol (3:1) mixture to obtain the lipid-free fractions (LF) from each size fraction (LFC and LFF). The composition of the organic matter at a molecular level in the different soil fractions was approached by analytical pyrolysis (Py-GC/MS) and FT-IR spectroscopy. These techniques are complementary and have been found suitable for the structural characterization of complex organic matrices (Moldoveanu, 1998; Piccolo and Stevenson, 1982); whereas Py-GC/MS provides detailed structural information of individual compounds present and a finger-printing of soil organic matter, FT-IR is informative about major functional groups present. The advantages of these techniques are well known: no need for pretreatment are fast to perform, highly reproducible and only small amount of samples are needed. Soil size fractions show contrasting differences in organic matter content (C 4-7 % and F > 40 %) and conspicuous differences were found in the pyrolysis products released by the fractions studied. The main families of pyrolysis compounds have well defined macromolecular precursors, such as lignin, polypeptides, polysaccharides and lipids (González-Vila et al., 2001). The C fractions yield higher relative abundance of lignin and polysaccharide derived pyrolysis compounds. Regarding the differences in the soil organic matter as affected by the different vegetation covers

  13. Probing the role of chemical enhancers in facilitating drug release from patches: M