WorldWideScience

Sample records for fsp full space

  1. Resolving kinematic redundancy with constraints using the FSP (Full Space Parameterization) approach

    International Nuclear Information System (INIS)

    Pin, F.G.; Tulloch, F.A.

    1996-01-01

    A solution method is presented for the motion planning and control of kinematically redundant serial-link manipulators in the presence of motion constraints such as joint limits or obstacles. Given a trajectory for the end-effector, the approach utilizes the recently proposed Full Space Parameterization (FSP) method to generate a parameterized expression for the entire space of solutions of the unconstrained system. At each time step, a constrained optimization technique is then used to analytically find the specific joint motion solution that satisfies the desired task objective and all the constraints active during the time step. The method is applicable to systems operating in a priori known environments or in unknown environments with sensor-based obstacle detection. The derivation of the analytical solution is first presented for a general type of kinematic constraint and is then applied to the problem of motion planning for redundant manipulators with joint limits and obstacle avoidance. Sample results using planar and 3-D manipulators with various degrees of redundancy are presented to illustrate the efficiency and wide applicability of constrained motion planning using the FSP approach

  2. Friction stir processing (FSP: refining microstructures and improving properties

    Directory of Open Access Journals (Sweden)

    McNelley, T. R.

    2010-12-01

    Full Text Available FSP is reviewed as an allied technology of friction stir welding (FSW and additional considerations such as processing pattern and step over distance are introduced. The application of FSP to continuously cast AA5083 material in the as-cast condition is described and the extent of grain refinement and homogenization of microstructure is documented. The FSP-induced superplastic response of this material is compared to the response of conventionally processed AA5083 and the improved ductility of the FSP material is related to grain refinement and microstructure homogenization.

    Se revisa el procesado por fricción batida (FSP como un aliado tecnológico de la soldadura por fricción batida (FSW y se introducen consideraciones adicionales tales como el patrón de procesado y el paso en función de la distancia. Se describe la aplicación de FSP al material AA5083 por colada continua en la condición de colada y se documenta el grado de afino de grano y homogeneización de la microestructura. La respuesta de superplasticidad inducida por FSP se compara con la respuesta de la aleación AA5083 procesada convencionalmente y la mejora de ductilidad del material FSP se relaciona con el afino de grano y la homogeneización de la microestructura.

  3. Impact mitigation using kinematic constraints and the full space parameterization method

    Energy Technology Data Exchange (ETDEWEB)

    Morgansen, K.A.; Pin, F.G.

    1996-02-01

    A new method for mitigating unexpected impact of a redundant manipulator with an object in its environment is presented. Kinematic constraints are utilized with the recently developed method known as Full Space Parameterization (FSP). System performance criterion and constraints are changed at impact to return the end effector to the point of impact and halt the arm. Since large joint accelerations could occur as the manipulator is halted, joint acceleration bounds are imposed to simulate physical actuator limitations. Simulation results are presented for the case of a simple redundant planar manipulator.

  4. Inverse kinematics of redundant systems driver IKORv1.0-2.0 (full space parameterization with orientation control, platform mobility, and portability)

    Energy Technology Data Exchange (ETDEWEB)

    Hacker, C.J.; Fries, G.A.; Pin, F.G.

    1997-01-01

    Few optimization methods exist for path planning of kinematically redundant manipulators. Among these, a universal method is lacking that takes advantage of a manipulator`s redundancy while satisfying possibly varying constraints and task requirements. Full Space Parameterization (FSP) is a new method that generates the entire solution space of underspecified systems of algebraic equations and then calculates the unique solution satisfying specific constraints and optimization criteria. The FSP method has been previously tested on several configurations of the redundant manipulator HERMIES-III. This report deals with the extension of the FSP driver, Inverse Kinematics On Redundant systems (IKOR), to include three-dimensional manipulation systems, possibly incorporating a mobile platform, with and without orientation control. The driver was also extended by integrating two optimized versions of the FSP solution generator as well as the ability to easily port to any manipulator. IKOR was first altered to include the ability to handle orientation control and to integrate an optimized solution generator. The resulting system was tested on a 4 degrees-of-redundancy manipulator arm and was found to successfully perform trajectories with least norm criteria while avoiding obstacles and joint limits. Next, the system was adapted and tested on a manipulator arm placed on a mobile platform yielding 7 degrees of redundancy. After successful testing on least norm trajectories while avoiding obstacles and joint limits, IKORv1.0 was developed. The system was successfully verified using comparisons with a current industry standard, the Moore Penrose Pseudo-Inverse. Finally, IKORv2.0 was created, which includes both the one shot and two step methods, manipulator portability, integration of a second optimized solution generator, and finally a more robust and usable code design.

  5. FLOW TESTING AND ANALYSIS OF THE FSP-1 EXPERIMENT

    Energy Technology Data Exchange (ETDEWEB)

    Hawkes, Grant L.; Jones, Warren F.; Marcum, Wade; Weiss, Aaron; Howard, Trevor

    2017-06-01

    The U.S. High Performance Research Reactor Conversions fuel development team is focused on developing and qualifying the uranium-molybdenum (U-Mo) alloy monolithic fuel to support conversion of domestic research reactors to low enriched uranium. Several previous irradiations have demonstrated the favorable behavior of the monolithic fuel. The Full Scale Plate 1 (FSP-1) fuel plate experiment will be irradiated in the northeast (NE) flux trap of the Advanced Test Reactor (ATR). This fueled experiment contains six aluminum-clad fuel plates consisting of monolithic U-Mo fuel meat. Flow testing experimentation and hydraulic analysis have been performed on the FSP-1 experiment to be irradiated in the ATR at the Idaho National Laboratory (INL). A flow test experiment mockup of the FSP-1 experiment was completed at Oregon State University. Results of several flow test experiments are compared with analyses. This paper reports and shows hydraulic analyses are nearly identical to the flow test results. A water velocity of 14.0 meters per second is targeted between the fuel plates. Comparisons between FSP-1 measurements and this target will be discussed. This flow rate dominates the flow characteristics of the experiment and model. Separate branch flows have minimal effect on the overall experiment. A square flow orifice was placed to control the flowrate through the experiment. Four different orifices were tested. A flow versus delta P curve for each orifice is reported herein. Fuel plates with depleted uranium in the fuel meat zone were used in one of the flow tests. This test was performed to evaluate flow test vibration with actual fuel meat densities and reported herein. Fuel plate deformation tests were also performed and reported.

  6. Intermittent fasting up-regulates Fsp27/Cidec gene expression in white adipose tissue.

    Science.gov (United States)

    Karbowska, Joanna; Kochan, Zdzislaw

    2012-03-01

    Fat-specific protein of 27 kDa (FSP27) is a novel lipid droplet protein that promotes triacylglycerol storage in white adipose tissue (WAT). The regulation of the Fsp27 gene expression in WAT is largely unknown. We investigated the nutritional regulation of FSP27 in WAT. The effects of intermittent fasting (48 d, eight cycles of 3-d fasting and 3-d refeeding), caloric restriction (48 d), fasting-refeeding (3-d fasting and 3-d refeeding), and fasting (3 d) on mRNA expression of FSP27, peroxisome proliferator-activated receptor γ (PPARγ2), CCAAT/enhancer binding protein α (C/EBPα), and M isoform of carnitine palmitoyltransferase 1 (a positive control for PPARγ activation) in epididymal WAT and on serum triacylglycerol, insulin, and leptin levels were determined in Wistar rats. We also determined the effects of PPARγ activation by rosiglitazone or pioglitazone on FSP27 mRNA levels in primary rat adipocytes. Long-term intermittent fasting, in contrast to other dietary manipulations, significantly up-regulated Fsp27 gene expression in WAT. Moreover, in rats subjected to intermittent fasting, serum insulin levels were elevated; PPARγ2 and C/EBPα mRNA expression in WAT was increased, and there was a positive correlation of Fsp27 gene expression with PPARγ2 and C/EBPα mRNA levels. FSP27 mRNA expression was also increased in adipocytes treated with PPARγ agonists. Our study demonstrates that the transcription of the Fsp27 gene in adipose tissue may be induced in response to nutritional stimuli. Furthermore, PPARγ2, C/EBPα, and insulin may be involved in the nutritional regulation of FSP27. Thus intermittent fasting, despite lower caloric intake, may promote triacylglycerol deposition in WAT by increasing the expression of genes involved in lipid storage, such as Fsp27. Copyright © 2012 Elsevier Inc. All rights reserved.

  7. (FSP) of Al–TiC in situ composite

    Indian Academy of Sciences (India)

    An Al-5 wt% TiC composite was processed in situ using K2TiF6 and graphite in Al melt and subjected to FSP. Processing parameters for FSP were optimized to get a defect free stir zone and homogenize the particle distribution. It was found that a rotation speed > 800 rpm is needed. A rotation speed of 1000 rpm and a ...

  8. Scientific and computational challenges of the fusion simulation project (FSP)

    International Nuclear Information System (INIS)

    Tang, W M

    2008-01-01

    This paper highlights the scientific and computational challenges facing the Fusion Simulation Project (FSP). The primary objective is to develop advanced software designed to use leadership-class computers for carrying out multiscale physics simulations to provide information vital to delivering a realistic integrated fusion simulation model with unprecedented physics fidelity. This multiphysics capability will be unprecedented in that in the current FES applications domain, the largest-scale codes are used to carry out first-principles simulations of mostly individual phenomena in realistic 3D geometry while the integrated models are much smaller-scale, lower-dimensionality codes with significant empirical elements used for modeling and designing experiments. The FSP is expected to be the most up-to-date embodiment of the theoretical and experimental understanding of magnetically confined thermonuclear plasmas and to provide a living framework for the simulation of such plasmas as the associated physics understanding continues to advance over the next several decades. Substantive progress on answering the outstanding scientific questions in the field will drive the FSP toward its ultimate goal of developing a reliable ability to predict the behavior of plasma discharges in toroidal magnetic fusion devices on all relevant time and space scales. From a computational perspective, the fusion energy science application goal to produce high-fidelity, whole-device modeling capabilities will demand computing resources in the petascale range and beyond, together with the associated multicore algorithmic formulation needed to address burning plasma issues relevant to ITER - a multibillion dollar collaborative device involving seven international partners representing over half the world's population. Even more powerful exascale platforms will be needed to meet the future challenges of designing a demonstration fusion reactor (DEMO). Analogous to other major applied physics

  9. Identifikasi Ras Fisiologis Fusarium oxysporum f.sp. cubense Berdasarkan Sifat Kompatibel Secara Vegetatif dan Pembentukan Bahan Volatil

    Directory of Open Access Journals (Sweden)

    Arif Wibowo

    2002-07-01

    Full Text Available Race characterization of F. oxysporum Schlecht. f.sp. cubense (E.F. Smith Snyd. & Hans. by determining disease reaction is difficult because the result may be biased due to the variability of growing condition. This study is aimed to identify physiological races of F. oxysporum f.sp. cubense in banana plantation in the province of Daerah Istimewa Yogyakarta by examining the relation of the fungal pathogen isolates. The identification of physiological races of F. oxysporum f.sp. cubense was based on vegetative compatibility groups (VCGs. The research was conducted in The Laboratory of Mycology Faculty of Agriculture GMU on March to November 2000. Observation of heterokarion formed by the mutant of F. oxysporum f.sp. cubense on selective medium was carried out in order to identify the compatibility of two different fungal isolates. Nitrate non utilizing (nit mutants obtained without mutagen were used as the label. Nit mutant obtained from the same wild type isolates could form heterokarion on minimal agar medium containing NaNO3 as nitrogen source. Eleven isolates of F. oxysporum f.sp. cubense have been isolated from several cultivars of banana. Vegetative compatibility tests showed that of 11 eleven isolates, there were six different group VCGs where four of them formed volatile compound in rice medium whereas two of them did not. Key words: Fusarium wilt, F. oxysporum f.sp. cubense, vegetative compatibility groups (VCGs

  10. Scientific and Computational Challenges of the Fusion Simulation Program (FSP)

    International Nuclear Information System (INIS)

    Tang, William M.

    2011-01-01

    This paper highlights the scientific and computational challenges facing the Fusion Simulation Program (FSP) a major national initiative in the United States with the primary objective being to enable scientific discovery of important new plasma phenomena with associated understanding that emerges only upon integration. This requires developing a predictive integrated simulation capability for magnetically-confined fusion plasmas that are properly validated against experiments in regimes relevant for producing practical fusion energy. It is expected to provide a suite of advanced modeling tools for reliably predicting fusion device behavior with comprehensive and targeted science-based simulations of nonlinearly-coupled phenomena in the core plasma, edge plasma, and wall region on time and space scales required for fusion energy production. As such, it will strive to embody the most current theoretical and experimental understanding of magnetic fusion plasmas and to provide a living framework for the simulation of such plasmas as the associated physics understanding continues to advance over the next several decades. Substantive progress on answering the outstanding scientific questions in the field will drive the FSP toward its ultimate goal of developing the ability to predict the behavior of plasma discharges in toroidal magnetic fusion devices with high physics fidelity on all relevant time and space scales. From a computational perspective, this will demand computing resources in the petascale range and beyond together with the associated multi-core algorithmic formulation needed to address burning plasma issues relevant to ITER - a multibillion dollar collaborative experiment involving seven international partners representing over half the world's population. Even more powerful exascale platforms will be needed to meet the future challenges of designing a demonstration fusion reactor (DEMO). Analogous to other major applied physics modeling projects (e

  11. Scientific and computational challenges of the fusion simulation program (FSP)

    International Nuclear Information System (INIS)

    Tang, William M.

    2011-01-01

    This paper highlights the scientific and computational challenges facing the Fusion Simulation Program (FSP) - a major national initiative in the United States with the primary objective being to enable scientific discovery of important new plasma phenomena with associated understanding that emerges only upon integration. This requires developing a predictive integrated simulation capability for magnetically-confined fusion plasmas that are properly validated against experiments in regimes relevant for producing practical fusion energy. It is expected to provide a suite of advanced modeling tools for reliably predicting fusion device behavior with comprehensive and targeted science-based simulations of nonlinearly-coupled phenomena in the core plasma, edge plasma, and wall region on time and space scales required for fusion energy production. As such, it will strive to embody the most current theoretical and experimental understanding of magnetic fusion plasmas and to provide a living framework for the simulation of such plasmas as the associated physics understanding continues to advance over the next several decades. Substantive progress on answering the outstanding scientific questions in the field will drive the FSP toward its ultimate goal of developing the ability to predict the behavior of plasma discharges in toroidal magnetic fusion devices with high physics fidelity on all relevant time and space scales. From a computational perspective, this will demand computing resources in the petascale range and beyond together with the associated multi-core algorithmic formulation needed to address burning plasma issues relevant to ITER - a multibillion dollar collaborative experiment involving seven international partners representing over half the world's population. Even more powerful exascale platforms will be needed to meet the future challenges of designing a demonstration fusion reactor (DEMO). Analogous to other major applied physics modeling projects (e

  12. Genetic diversity in Fusarium oxysporum f.sp. dianthi and F. redolens f.sp. dianthi

    NARCIS (Netherlands)

    Baayen, R.P.; Dreven, van F.; Krijger, M.C.; Waalwijk, C.

    1997-01-01

    Pathogenic isolates were selected representing all known vegetative compatibility groups (VCGs) and races of Fusarium oxysporum sensu lato from Dianthus spp. On basis of differences in the internal transcribed spacer region of the ribosomal DNA, six VCGs were classified as F. oxysporum f.sp. dianthi

  13. Comparison of Fusarium oxysporum fsp lycopersici races 1, 2 and 3 ...

    African Journals Online (AJOL)

    Dr J. T. Ekanem

    Sequence analysis of genomic fragments from the intergenic spacer region from three isolates of. Fusarium oxysporum fsp lycoperisci and fsp radicis lycopersici was carried out using the big dye terminator sequencing procedure. Two conditions of the DNA templates were also evaluated for their influence on the outcome of ...

  14. Intensitas dan Luas Serangan Beberapa Isolat Fusarium oxysporum f.sp. zingiberi pada Jahe Gajah

    Directory of Open Access Journals (Sweden)

    Hermawati Cahyaningrum

    2017-07-01

    Full Text Available Ginger is one of the spices and medicinal commodities which is cultivated in Indonesia. One of the obstacles encountered in the cultivation of ginger is the rhizome rot disease which is mainly caused by Fusarium oxysporum Schlecht f.sp. zingiberi Trujillo. This study is aimed to know the growth ability and virulence level of the isolates on ginger rhizome and plants. The research was conducted in the laboratory and in the screen house by using Complete Random Design consisted of 10 treatments and 4 replications. The parameters observed were growth ability of F. oxysporum f.sp. zingiberi, rhizome rot disease symptoms, incubation period, extensive decay and weight difference of the rhizomes. The results showed that F. oxysporum f.sp. zingiberi which was stored for 4 years in sterile soil medium was still capable to cause damage to the rhizome and plants. Incubation periods of rhizome decay and plant symptoms were from 3 to 11.5 and 55.5 to 68.5 days, respectively. The most virulent isolate was MSO1 with extensive decay of rhizome and the wilting intensity were 108.95 mm2 dan 33.88%, respectively.   Intisari Jahe merupakan salah satu komoditas rempah dan obat yang banyak dibudidayakan di Indonesia. Salah satu kendala yang dihadapi dalam budidaya jahe adalah adanya gangguan penyakit busuk rimpang yang disebabkan (terutama oleh Fusarium oxysporum Schlecht f.sp. zingiberi Trujillo. Penelitian bertujuan untuk menguji daya tumbuh dan virulensi isolat F. oxysporum f.sp. zingiberi pada rimpang dan tanaman jahe gajah. Penelitian dilakukan di laboratorium dan di rumah kasa menggunakan Rancangan Acak Kelompok Lengkap (RAKL yang masing-masing terdiri dari 10 perlakuan dan 4 ulangan. Parameter yang diamati meliputi daya tumbuh F. oxysporum f.sp. zingiberi, gejala penyakit busuk rimpang, masa inkubasi, luas pembusukan dan selisih bobot basah rimpang. Hasil penelitian menunjukkan bahwa F. oxysporum f.sp. zingiberi yang telah di simpan 4 tahun dalam medium tanah

  15. Experimental Study and Response Surface Methodology for Investigation of FSP Process

    Directory of Open Access Journals (Sweden)

    Weglowski Marek Stanisław

    2014-12-01

    Full Text Available W pracy przedstawiono wpływ predkosci obrotowej i przesuwu narzedzia oraz siły docisku na moment obrotowy działajacy na narzedzia w procesie tarciowej modyfikacji z mieszaniem materiału (FSP. Do wyznaczenia zaleznosci pomiedzy momentem a predkosciami obrotowa i przesuwu oraz siła docisku wykorzystano metode powierzchni odpowiedzi. Wykorzystano modele liniowy i kwadratowy uwzgledniajace interakcje pomiedzy parametrami wejsciowymi. Lepsze dopasowanie zapewnił model kwadratowy. Wyniki badan wykazały, iz wzrost predkosci obrotowej narzedzia powoduje zmniejszenie momentu działajacego na narzedzie, natomiast wzrost predkosci przesuwu i siły docisku powoduje wzrost momentu. Badania były przeprowadzone na odlewniczym stopie aluminium AlSi9Mg. Badania metalograficzne ujawniły, ze zastosowanie procesu FSP powoduje rozdrobnienie ziarna oraz redukcje porowatosci w obszarze mieszania. Wyrazna segregacja Si i Fe w materiale rodzimym została wyeliminowana, a rozkład pierwiastków jest bardziej jednorodny.

  16. Biolistic transformation of the obligate plant pathogenic fungus, Erysiphe graminis f.sp. hordei

    DEFF Research Database (Denmark)

    Christiansen, S.K.; Knudsen, S.; Giese, H.

    1995-01-01

    Particle gun acceleration appears to be a possible way to transform mycelium cells of obligate plant parasites growing on host surfaces, GUS expression was obtained in E. graminis f.sp. hordei cells after bombardment with the GUS gene under the control of the E. graminis f.sp. hordei beta...

  17. SUPPRESSION ABILITY OF CRUDE EXTRACT DERIVED FROM MARINE BIOTA AGAINST FUSARIUM OXYSPORUM F.SP. VANILLAE

    Directory of Open Access Journals (Sweden)

    I Ketut Suada

    2010-06-01

    Full Text Available The objective of this research was to investigate suppression ability of marine biota extracts against Fusarium oxysporum f.sp. vanillae of vanilla stem rot. Samples were collected at intertidal zones and in the depth of 1-7 m from seven beaches in Bali. Screening of active compounds of biota extracts were conducted using inhibition zone of well diffusion method on Potato Dextrose Agar (PDA. The extract was tested in-vitro in PDA medium using completely randomized design with three replicates. The methanolic extract of Aglaophenia sp. was able to suppress the growth of F. oxysporum f.sp. vanillae effectively, with minimum inhibition concentration (MIC of 0.05 %. The extract inhibited colony growth diameter and total mycelial dry weight.

  18. Penggunaan Streptomyces sp. Sebagai Biokontrol Penyakit Layu Pada Tanaman Cabai Merah (Capsicum annuum L. yang Disebabkan Oleh Fusarium oxysporum f.sp. capsici

    Directory of Open Access Journals (Sweden)

    ANINDA OKTAVIA RAHARINI

    2014-01-01

    Full Text Available A research has been conducted to find out Streptomyces bacteria at Bukit Jimbaran, to inhibitionpotency of Streptomyces sp. to pathogenic fungi Fusarium oxysporum f.sp. capsici, and to find outantifungal activity of Streptomyces filtrate to F.oxysporum f.sp. capsici in chili (Capsicum annuumL. plants. Streptomyces sp. isolation was done by platting method with selective media YMA (ISP4.Identification of Streptomyces sp. used Bergey’s book entitled Manual Determinative Bacteriology.Test inhibition against F.oxysporum f.sp. capsici and in vivo test used by dying the roots of the chili(C.annuum L. plant with F.oxysporum f.sp. capsici and after 30 seconds the roots were dying withStreptomyces sp. culture, furthermore sterile soil on polybag watered by F.oxysporum f.sp. capsicispore and Streptomyces sp. culture at the same time. The result found five isolates Streptomyces sp.with different morphological. The antagonis test showed Streptomyces sp. 4 had ability (82% againstFusarium, Streptomyces sp.1 (72%, Streptomyces sp.2 (64%, Streptomyces sp.3 (76%, andStreptomyces sp. 5 (32%. All Streptomyces suppressed the growth of Fusarium on chili plants inglass house (p<0,05. Streptomyces sp.4 suppressed Fusarium wilt disease in chili from 80% in controlto 8%.

  19. Identifikasi Ras Fisiologis Fusarium Oxysporum F.sp. Cubense Berdasarkan Sifat Kompatibel secara Vegetatif dan Pembentukan Bahan Volatil

    OpenAIRE

    Wibowo, Arif; Suryanti, Suryanti; Sumardiyono, Christanti

    2002-01-01

    Race characterization of F. oxysporum Schlecht. f.sp. cubense (E.F. Smith) Snyd. & Hans. by determining disease reaction is difficult because the result may be biased due to the variability of growing condition. This study is aimed to identify physiological races of F. oxysporum f.sp. cubense in banana plantation in the province of Daerah Istimewa Yogyakarta by examining the relation of the fungal pathogen isolates. The identification of physiological races of F. oxysporum f.sp. cubense was b...

  20. A music quality rating test battery for cochlear implant users to compare the FSP and HDCIS strategies for music appreciation.

    Science.gov (United States)

    Looi, Valerie; Winter, Philip; Anderson, Ilona; Sucher, Catherine

    2011-08-01

    The purpose of this study was to develop a music quality rating test battery (MQRTB) and pilot test it by comparing appraisal ratings from cochlear implant (CI) recipients using the fine-structure processing (FSP) and high-definition continuous interleaved sampling (HDCIS) speech processing strategies. The development of the MQRTB involved three stages: (1) Selection of test items for the MQRTB; (2) Verification of its length and complexity with normally-hearing individuals; and (3) Pilot testing with CI recipients. Part 1 involved 65 adult listeners, Part 2 involved 10 normally-hearing adults, and Part 3 involved five adult MED-EL CI recipients. The MQRTB consisted of ten songs, with ratings made on scales assessing pleasantness, naturalness, richness, fullness, sharpness, and roughness. Results of the pilot study, which compared FSP and HDCIS for music, indicated that acclimatization to a strategy had a significant effect on ratings (p genre on ratings. Overall the results suggest that the use of FSP as the default strategy for MED-EL recipients would have a positive effect on music appreciation, and that the MQRTB is an effective tool for assessing music sound quality.

  1. Effects of Alternaria alternata f.sp. lycopersici toxins on pollen

    NARCIS (Netherlands)

    Bino, R.J.; Franken, J.; Witsenboer, H.M.A.; Hille, J.; Dons, J.J.M.

    1988-01-01

    Effects of the phytotoxic compounds (AAL-toxins) isolated from cell-free culture filtrates of Alternaria alternata f.sp. lycopersici on in vitro pollen development were studied. AAL-toxins inhibited both germination and tube growth of pollen from several Lycopersicon genotypes. Pollen from

  2. The Role of Friction Stir Processing (FSP Parameters on TiC Reinforced Surface Al7075-T651 Aluminum Alloy

    Directory of Open Access Journals (Sweden)

    Felipe García-Vázquez

    Full Text Available Abstract: Aluminum alloys are very promising for structural applications in aerospace, military and transportation industries due to their light weight, high strength-to-weight ratio and excellent resistance to corrosion. In comparison to unreinforced aluminum alloys, aluminum/aluminum alloy matrix composites reinforced with ceramic phases exhibit higher strength and hardness, improved tribological characteristics. A novel surface modifying technique, friction stir processing (FSP, has been developed for fabrication of surface composite with an improved performance. The effect of FSP parameters such as number of passes, direction of each pass, sealed or unsealed groove on microstructure was investigated. In this work, nano-particles of TiC (2% in weight were added to aluminum alloy AA7075-T651 to produce a functional surface. Fixed parameters for this AA7075 alloy were used; rotation speed of 1000 rpm, travel speed of 300 mm/min and pin penetration of 2.8 mm. Optical microscopy (OM, scanning electron microscopy (SEM and atomic force microscopy (AFM were employed to study the microstructure of the fabricated surface composites. The results indicated that the selected FSP parameters influenced the area of surface composite, distribution of TiC particles and micro-hardness of the surface composites. Finally, in order to evaluate rate wear the pin on disk test was carried out.

  3. Biodistribution and radiation dosimetry of a positron emission tomographic ligand, 18F-SP203, to image metabotropic glutamate subtype 5 receptors in humans

    International Nuclear Information System (INIS)

    Kimura, Yasuyuki; Simeon, Fabrice G.; Pike, Victor W.; Innis, Robert B.; Fujita, Masahiro; Hatazawa, Jun; Mozley, P.D.

    2010-01-01

    A new PET ligand, 3-fluoro-5-(2-(2- 18 F-(fluoromethyl)-thiazol-4-yl)ethynyl)benzonitrile ( 18 F-SP203), is a positron emission tomographic radioligand selective for metabotropic glutamate subtype 5 receptors. The purposes of this study were to estimate the radiation-absorbed doses of 18 F-SP203 in humans and to determine from the distribution of radioactivity in bone structures with various proportions of bone and red marrow whether 18 F-SP203 undergoes defluorination. Whole-body images were acquired for 5 h after injecting 18 F-SP203 in seven healthy humans. Urine was collected at various time points. Radiation-absorbed doses were estimated by the Medical Internal Radiation Dose scheme. After injecting 18 F-SP203, the two organs with highest radiation exposure were urinary bladder wall and gallbladder wall, consistent with both urinary and fecal excretion. In the skeleton, most of the radioactivity was in bone structures that contain red marrow and not in those without red marrow. Although the dose to red marrow (30.9 μSv/MBq) was unusually high, the effective dose (17.8 μSv/MBq) of 18 F-SP203 was typical of that of other 18 F radiotracers. 18 F-SP203 causes an effective dose in humans typical of several other 18 F radioligands and undergoes little defluorination. (orig.)

  4. Superplastic forming of 7475 Al sheet after friction stir processing (FSP)

    Energy Technology Data Exchange (ETDEWEB)

    Mahoney, M.; Bingel, W.H.; Fuller, C. [Rockwell Scientific Co., Thousand Oaks, CA (United States); Barnes, A.J. [Superform USA, Riverside, CA (United States)

    2004-07-01

    Since the invention of friction stir welding (FSW) in 1991, an increasing number of successful applications have been found for this unique solid-state welding technique. More recently, attention has been given to utilizing the mechanics of friction stirring to thermo-mechanically modify the microstructure of aluminum alloys to create or enhance superplasticity. Until now, superplasticity induced by friction stir processing (FSP) has only been demonstrated in small samples and evaluated by hot tensile elongation testing. The present work describes what we believe to be the first biaxial testing and full size component superplastic forming of friction stir processed aluminum sheet. The remarkable formability demonstrated in these 'first time' trials is described in detail. (orig.)

  5. Genome size variation in the pine fusiform rust pathogen Cronartium quercuum f.sp. fusiforme as determined by flow cytometry

    Science.gov (United States)

    Claire L Anderson; Thomas L Kubisiak; C Dana Nelson; Jason A Smith; John M Davis

    2010-01-01

    The genome size of the pine fusiform rust pathogen Cronartium quercuum f.sp. fusiforme (Cqf) was determined by flow cytometric analysis of propidium iodide-stained, intact haploid pycniospores with haploid spores of two genetically well characterized fungal species, Sclerotinia sclerotiorum and Puccinia graminis f.sp. tritici, as size standards. The Cqf haploid genome...

  6. Two-Nozzle Flame Spray Pyrolysis (FSP) Synthesis of CoMo/Al2O3 Hydrotreating Catalysts

    DEFF Research Database (Denmark)

    Høj, Martin; Pham, David K.; Brorson, Michael

    2013-01-01

    and the hydrodenitrogenation activity improved from 70 to 90 % relative activity. This suggests that better promotion of the active molybdenum sulfide phase was achieved when using two-nozzle FSP synthesis, probably due to less formation of the undesired phase CoAl2O4, which makes Co unavailable for promotion.......Two-nozzle frame spray analysis (FSP) synthesis of CoMo/Al2O3 where Co and Al are sprayed in separate flames was applied to minimize the formation of CoAl2O4 observed in one-nozzle flame spray pyrolysis (FSP) synthesis and the materials were characterized by N2-adsorption (BET), X-ray diffraction...... (XRD), UV–vis diffuse reflectance spectroscopy, Raman spectroscopy, transmission electron microscopy, and catalytic performances in hydrotreating. By varying the flame mixing distances (81–175 mm) the amount of CoAl2O4 could be minimized. As evidenced by UV–vis spectroscopy, CoAl2O4 was detected only...

  7. Polychlorinated biphenyls exposure-induced insulin resistance is mediated by lipid droplet enlargement through Fsp27.

    Science.gov (United States)

    Kim, Hye Young; Kwon, Woo Young; Kim, Yeon A; Oh, Yoo Jin; Yoo, Seung Hee; Lee, Mi Hwa; Bae, Ju Yong; Kim, Jong-Min; Yoo, Young Hyun

    2017-06-01

    Although epidemiological and experimental studies demonstrated that polychlorinated biphenyls (PCBs) lead to insulin resistance, the mechanism underlying PCBs-induced insulin resistance has remained unsolved. In this study, we examined in vitro and in vivo effects of PCB-118 (dioxin-like PCB) and PCB-138 (non-dioxin-like PCB) on adipocyte differentiation, lipid droplet growth, and insulin action. 3T3-L1 adipocytes were incubated with PCB-118 or PCB-138 during adipocyte differentiation. For in vivo studies, C57BL/6 mice were administered PCB-118 or PCB-138 (37.5 mg/kg) by intraperitoneal injection and we examined adiposity and whole-body insulin action. PCB-118 and PCB-138 significantly promoted adipocyte differentiation and increased the lipid droplet (LD) size in 3T3-L1 adipocytes. In mice, both PCBs increased adipose mass and adipocyte size. Furthermore, both PCBs induced insulin resistance in vitro and in vivo. Expression of fat-specific protein 27 (Fsp27), which is localized to LD contact sites, was increased in PCB-treated 3T3-L1 adipocytes and mice. Depletion of Fsp27 by siRNA resulted in the inhibition of LD enlargement and attenuation of insulin resistance in PCB-treated 3T3-L1 adipocytes. An anti-diabetic drug, metformin, attenuated insulin resistance in PCB-treated 3T3-L1 adipocytes through the reduced expression of Fsp27 protein and LD size. This study suggests that PCB exposure-induced insulin resistance is mediated by LD enlargement through Fsp27.

  8. Aspects of resistance of flax and linseed (Linum usitatissimum) to Fusarium oxysporum f.sp. lini = Aspecten van de resistentie in vezel- en olievlas (Linum usitatissimum) tegen Fusarium oxysporum f.sp. lini

    NARCIS (Netherlands)

    Kroes, I.

    1997-01-01

    In the thesis aspects have been described of the flax and linseed interaction to Fusarium oxysporum f.sp. lini, the causal agent of flax wilt. Two in vitro tests were established to screen for resistance, to investigate race specificity

  9. Theory of function spaces

    CERN Document Server

    Triebel, Hans

    1983-01-01

    The book deals with the two scales Bsp,q and Fsp,q of spaces of distributions, where -8spaces, such as Hölder spaces, Zygmund classes, Sobolev spaces, Besov spaces, Bessel-potential spaces, Hardy spaces and spaces of BMO-type. It is the main aim of this book to give a unified treatment of the corresponding spaces on the Euclidean n-space Rn in the framework of Fourier analysis, which is based on the technique of maximal functions, Fourier multipliers and interpolation assertions. These topics are treated in Chapter 2, which is the heart

  10. Parameter optimization and evaluation of mechanical and thermal properties of nanographene reinforced Al 6060 surface composite using FSP

    Science.gov (United States)

    Kalyanamanohar, V.; Appalachari, D. Gireesh Chandra

    2018-04-01

    Friction stir processing (FSP) is emerging as a promising technique for making surface composites. FSP can improve surface properties such as hardness, strength, ductility, corrosion resistance, fatigue life and formability without affecting the bulk properties of the material. The literatures reported that FSP can produces very fine equiaxed and homogeneous grain structure for different Al alloys. Al 6060 is heat treatable alloy which has high thermal and electrical properties than remaining Al alloys. Al 6060 is being used where high rate of heat exchange is needed i.e. engine cylinders, heat exchangers etc. As derived from the carbon materials, like graphene and CNTs dissipates heat rapidly that improves the life of the engine cylinders and heat exchangers. In this work, nanographene is reinforced in the Al 6060 using friction stir processing at different rotational speeds, traverse speeds, and at constant load and tool tilt angle. After processed, the effect of process parameters on microstructure of the surface composite was investigated. The SEM studies shows that the FSP produces very fine and homogenous grain structure and it is observed that smaller grain size structure is obtained at lower traverse speed and higher rotational speeds. Significant improvement in ultimate tensile strength(22.9%) and hardness (22.44%) when compared friction stir processed plate at 1400 rotational speed and 20mm/min traverse speed with base Al 6060 plate. Coefficient of thermal expansion test of nanographene reinforced Al 6060 shows 7.33% decrease in its coefficient of thermal expansion as graphene has tendency to reduce the anisotropic nature.

  11. Improving protein production of indigenous microalga Chlorella vulgaris FSP-E by photobioreactor design and cultivation strategies.

    Science.gov (United States)

    Chen, Chun-Yen; Lee, Po-Jen; Tan, Chung Hong; Lo, Yung-Chung; Huang, Chieh-Chen; Show, Pau Loke; Lin, Chih-Hung; Chang, Jo-Shu

    2015-06-01

    Fish meal is currently the major protein source for commercial aquaculture feed. Due to its unstable supply and increasing price, fish meal is becoming more expensive and its availability is expected to face significant challenges in the near future. Therefore, feasible alternatives to fish meal are urgently required. Microalgae have been recognized as the most promising candidates to replace fish meal because the protein composition of microalgae is similar to fish meal and the supply of microalgae-based proteins is sustainable. In this study, an indigenous microalga (Chlorella vulgaris FSP-E) with high protein content was selected, and its feasibility as an aquaculture protein source was explored. An innovative photobioreactor (PBR) utilizing cold cathode fluorescent lamps as an internal light source was designed to cultivate the FSP-E strain for protein production. This PBR could achieve a maximum biomass and protein productivity of 699 and 365 mg/L/day, respectively, under an optimum urea and iron concentration of 12.4 mM and 90 μM, respectively. In addition, amino acid analysis of the microalgal protein showed that up to 70% of the proteins in this microalgal strain consist of indispensable amino acids. Thus, C. vulgaris FSP-E appears to be a viable alternative protein source for the aquaculture industry. Copyright © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Extracción del ADN de Fusarium Oxysporum f.sp. Dianthi

    Directory of Open Access Journals (Sweden)

    Sixta T. Martínez

    2010-07-01

    Full Text Available Se estudia la utílización de dos métodos para la extracción del ADN del Fusarium o.xy.sporum f.sp. Dianthi. En los dos métodos la pared del hongo se rompió con nitrógeno líquido, uno de ellos empleó como solución extractora bromuro de cetiltrimetil amonio (BCTA y el otro una solución de sacarosa con altas concentraciones de protcasa y EDTA. Para la desproteinización ambos métodos utilizaron soluciones de fcnol-clorofonno y enzimas proteolítícas. El ADN obtenido se digirió con enzimas de restricción EcoRI y Hindlll. Se corroboró que cl ADN estaba libre de los contaminantes más frecuentes en hongos, como proteínas y carbohidratos por medio de ultracentrifugación en cloruro de cesio (CsCI. La extracción con BCTA presentó los mejores rendimientos.

  13. Syntactic and FSP Aspects of Fronting as a Style Marker

    Directory of Open Access Journals (Sweden)

    Libuše Dušková

    2017-07-01

    Full Text Available The paper examines contextual and emphatic fronting in academic prose, fiction narrative and fiction dialogue in order to ascertain whether the types of fronting can serve as a style marker. The differences in the distribution and their effect on style are assumed to be connected with the respective FSP structures: in emphatic fronting the fronted element is the rheme, whereas in contextual fronting it is the diatheme. Hence emphatic fronting displays a prominent deviation from the basic distribution of communicative dynamism, whereas contextual fronting achieves agreement with it. As compared with the unmarked postverbal ordering, emphatic fronting intensifies the emphatic/emotional character of the content being expressed, which is a feature of speech, while contextual fronting serves as a direct link with what precedes, hence contributes to textual cohesion, which is a characteristic of academic prose, with fiction narrative presumably occupying an intermediate position. The results of the study show more types of fronting with diversified structures and less clear-cut relations between the types of frontings and the examined text sorts.

  14. Phenotypic evaluation of the resistance in F1 carnation populations to vascular wilt caused by Fusarium oxysporum f.sp. dianthi

    Directory of Open Access Journals (Sweden)

    Johana Carolina Soto-Sedano

    2012-08-01

    Full Text Available One of the most important phytosanitary problems of the carnation crops in Colombia and in the entire world is vascular wilting produced by Fusarium oxysporum f.sp. dianthi. Currently, an effective treatment against the pathogen does not exist; the search for resistant varieties has been the most successful method for control of this disease. Breeding programs are vital to solving the problem of the carnation fusariosis. The objective of this research was the phenotypic evaluation of carnation F1 populations, products of contrasting crossing, resistant per susceptible to F. oxysporum f.sp. dianthi, in order to determine if the resistance is inherited in the lines. This information will contribute to the selection of material and to the successful introduction of the resistant characteristic, whose expression is commercially acceptable, to the gene pool. The methodology adopted was a phenotypic evaluation of the response to the parasite in the population (450 individuals and in the parental. This evaluation estimated the area under the curve (AU DPC, using a scale of symptoms reported for carnation vascular wilt. Three different phenotypes were established with this evaluation. The moderately susceptible one is the predominant phenotype and an analysis of phenotypic frequencies was carried out on it. The results show that the individuals of the evaluated F1 population were distributed between two extreme ranges, resistant and susceptible; this shows that there is segregation for the trait resistant to F. oxysporum f.sp dianthi. We did not observe clearly differentiated classes, i.e. with complete absence or presence of the disease, indicating a possible control of the resistance in the evaluated carnation material, governed by more than one gene and with a possible additive genetic action

  15. Enhancing lutein productivity of an indigenous microalga Scenedesmus obliquus FSP-3 using light-related strategies.

    Science.gov (United States)

    Ho, Shih-Hsin; Chan, Ming-Chang; Liu, Chen-Chun; Chen, Chun-Yen; Lee, Wen-Lung; Lee, Duu-Jong; Chang, Jo-Shu

    2014-01-01

    Lutein, one of the main photosynthetic pigments, is a promising natural product with both nutritional and pharmaceutical applications. In this study, light-related strategies were applied to enhance the cell growth and lutein production of a lutein-rich microalga Scenedesmus obliquus FSP-3. The results demonstrate that using white LED resulted in better lutein production efficiency when compared to the other three monochromatic LEDs (red, blue, and green). The lutein productivity of S. obliquus FSP-3 was further improved by adjusting the type of light source and light intensity. The optimal lutein productivity of 4.08 mg/L/d was obtained when using a TL5 fluorescent lamp at a light intensity of 300 μmol/m(2)/s, and this performance is better than that reported in most related studies. Moreover, the time-course profile of lutein accumulation in the microalga shows that the maximal lutein content and productivity were obtained at the onset of nitrogen depletion. Copyright © 2013 Elsevier Ltd. All rights reserved.

  16. Genetic transformation of Fusarium oxysporum f.sp. gladioli with Agrobacterium to study pathogenesis in Gladiolus

    Science.gov (United States)

    Fusarium rot caused by Fusarium oxysporum f.sp. gladioli (Fog) is one of the most serious diseases of Gladiolus, both in the field and in stored bulbs. In order to study the pathogenesis of this fungus, we have transformed Fog with Agrobacterium tumefaciens binary vectors containing the hygromycin B...

  17. Interaction of Pseudostellaria heterophylla with Fusarium oxysporum f.sp. heterophylla mediated by its root exudates in a consecutive monoculture system.

    Science.gov (United States)

    Zhao, Yongpo; Wu, Linkun; Chu, Leixia; Yang, Yanqiu; Li, Zhenfang; Azeem, Saadia; Zhang, Zhixing; Fang, Changxun; Lin, Wenxiong

    2015-02-03

    In this study, quantitative real-time PCR (qPCR) was used to determine the amount of Fusarium oxysporum, an important replant disease pathogen in Pseudostellaria heterophylla rhizospheric soil. Moreover, HPLC was used to identify phenolic acids in root exudates then it was further to explore the effects of the phenolic acid allelochemicals on the growth of F. oxysporum f.sp. heterophylla. The amount of F. oxysporum increased significantly in P. heterophylla rhizosphere soil under a consecutive replant system as monitored through qPCR analysis. Furthermore, the growth of F. oxysporum f.sp. heterophylla mycelium was enhanced by root exudates with a maximum increase of 23.8%. In addition, the number of spores increased to a maximum of 12.5-fold. Some phenolic acids promoted the growth of F. oxysporum f.sp. heterophylla mycelium and spore production. Our study revealed that phenolic acids in the root secretion of P. heterophylla increased long with its development, which was closely related to changes in rhizospheric microorganisms. The population of pathogenic microorganisms such as F. oxysporum in the rhizosphere soil of P. heterophylla also sharply increased. Our results on plant-microbe communication will help to better clarify the cause of problems associated with P. heterophylla under consecutive monoculture treatment.

  18. Detection of Fusarium oxysporum f.sp. basilici in substrates and roots by PCR.

    Science.gov (United States)

    Pugliese, M; Ferrocino, I; Gullino, M L; Garibaldi, A

    2013-01-01

    Fusarium oxysporum is a soil-borne fungus that causes vascular wilts in a wide variety of plant species. Basil is recognized as an ecological niche for Fusarium oxysporum f.sp. basilici (FOB) and this fungus is now present in most countries where basil is cultivated. The rapid identification of the species affecting basil plants is necessary to define a successful method for crop protection. The aim of this study was to develop a PCR method for the rapid detection of Fusarium oxysporum f. sp. basilici in substrates. The specificity of the primers used was tested using the DNA extracted directly from substrate samples. Fusarium oxysporum f.sp. basilici was artificially inoculated with decreasing amounts in a commercial substrate (sphagnum peat moss) and in a mixture with 40% of municipal compost, after steam disinfestation. Basil seeds (cv. Fine verde) were sown in pots that were laid on a bench in the greenhouse. At time 0 and after 7, 14 and 21 days from the inoculation, substrate and root samples were collected and prepared for microbial analysis and for the DNA extraction. DNA extraction was carried out using NucleoSpin Soil Kit (Macherey-Nagel, Germany). PCR amplification for the specific detection was carried out using primer sets Bik 1 (5'-ATT CAA GAG CTA AAG GTC C-3') and Bik 4 (5'-TTT GAC CAA GAT AGA TGC C-3') for the first PCR, while primers Bik 1 + Bik 2 (5'-AAA GGT AGT ATA TCG GAG G-3') for the nested PCR to increase detection sensitivity. Disease incidence was also assessed 21 days after seeding. The results showed the presence of amplified fragments of the expected size when the concentration of F. oxysporum f.sp. basilici was at least 3.5 Log CFU g(-1) by using DNA extract directly from substrate, before roots were infected by the pathogen. The detection of Fusarium oxysporum f. sp. basilici by PCR method developed in this study is certainly simple and fast and can be useful for its reliable detection in substrate samples, but not to guarantee that

  19. Management of Fusarium oxysporum f.sp cubense (Foc-TR4) from banana by anaerobic soil disinfestation (ASD)

    NARCIS (Netherlands)

    Runia, W.T.

    2014-01-01

    Applied Plant Research in Lelystad has, commissioned by Gert Kema, Plant Research International (PRI) and leader of the Panama Project, performed a trial to measure the efficacy of anaerobic soil disinfestation (ASD) with a ‘Herbie” product against Fusarium oxysporum f.sp. cubense (Foc; TR 4),

  20. Biological control of wilt disease complex on tomato crop caused by Meloidogyne javanica and Fusarium oxysporum f.sp. lycopersici by Verticillium leptobactrum.

    Science.gov (United States)

    Hajji-Hedfi, Lobna; Regaieg, Hajer; Larayedh, Asma; Chihani, Noura; Horrigue-Raouani, Najet

    2017-09-23

    The efficacy of Verticillium leptobactrum isolate (HR1) was evaluated in the control of root-knot nematode and Fusarium wilt fungus under laboratory and greenhouse conditions. Five concentrations of V. leptobactrum (HR1) isolate were tested for their nematicidal and fungicidal activities against Meloidogyne javanica and Fusarium oxysporum f.sp. lycopersici in vitro. Laboratory trials showed that mycelium growth inhibition of Fusarium wilt fungus was correlated to the increase of the concentration of culture filtrate. All dilutions showed efficiency in reducing the growth of Fusarium oxysporum f.sp. lycopersici. The greatest nematicidal activity was observed at 50, 75, and 100% filtrate dilutions. The egg hatching percentage reached 42%, and the juvenile's corrected mortality registered 90% for the above treatments. In greenhouse experiment, the biocontrol agent fungus enhanced significantly tomato growth components (height and weight of plant and root). The multiplication rate of root-knot nematode and the Fusarium wilt disease incidence declined significantly with soil application of V. leptobactrum as with chemical treatments. The isolate HR1 was efficient to control wilt disease complex caused by M. javanica and Fusarium oxysporum f.sp. lycopersici.

  1. Fungal cell wall polymer based nanoparticles in protection of tomato plants from wilt disease caused by Fusarium oxysporum f.sp. lycopersici.

    Science.gov (United States)

    Sathiyabama, M; Charles, R Einstein

    2015-11-20

    Cell wall polymer (chitosan) was isolated from Fusarium oxysporum f.sp. lycopersici. They were cross linked with sodium tripolyphosphate (TPP) to synthesize nanoparticles (CWP-NP). The nanoparticles were characterized by FTIR, DLS, SEM, XRD and NMR analyses. The isolated CWP-NP exhibit antifungal activity under in vitro condition. The foliar application of the CWP-NP to tomato plants challenged with F. oxysporum f. sp. lycopersici showed delay in wilt disease symptom expression and reduce the wilt disease severity. Treated plants also showed enhanced yield. These results suggested the role of the CWP-NP in protecting tomato plants from F. oxysporum f.sp. lycopersici infection. Copyright © 2015 Elsevier Ltd. All rights reserved.

  2. Streptomyces sp. Sebagai Biofungisida Patogen Fusarium oxysporum (Schlecht. f.sp. lycopersici (Sacc. Snyd. et Hans. Penyebab Penyakit Layu Pada Tanaman Tomat (Solanum lycopersicum L.

    Directory of Open Access Journals (Sweden)

    NURI MANDAN SARI

    2014-01-01

    Full Text Available A research was conducted to isolate Streptomyces sp. of soil Udayana University campus in theBukit-Jimbaran, to obtain the most effective Streptomyces sp. which is effective in inhibit the growth ofFusarium oxysporum f.sp. lycopersici, and to test response of tomato plants with Streptomyces sp.culture against Fusarium wilt desease. Implementation phases of the research consisted of isolation andidentification of Streptomyces sp, test the inhibition against F. oxysporum f.sp. lycopersici, and in vivotest used by dyeing the roots of the tomato plant (Solanum lycopersicum with Fusarium spores andafter 30 seconds the roots were dyeing Streptomyces culture. Furthermore, sterile soil in polybagwatered by Fusarium spores and Streptomyces culture at the same time. Based on morphologicalcharacteristic it found five isolates of Streptomyces sp.. The antagonist test showed Streptomyces sp.1 had ability (75% against Fusarium, Streptomyces sp 2 (68,3%, Streptomyces sp. 3 (71,6%,Streptomyces sp. 4 (63,3%, and Streptomyces sp. 5 (21,6%. All Streptomyces suppressed thegrowth of Fusarium on tomato plants in glass house (p<0,05. Streptomyces sp.3 suppressed Fusariumwilt disease in tomato from 88% in control to 20%.

  3. Extracción del ADN de Fusarium Oxysporum f.sp. Dianthi

    OpenAIRE

    Sixta T. Martínez; Carlos Y. Soto

    2010-01-01

    Se estudia la utílización de dos métodos para la extracción del ADN del Fusarium o.xy.sporum f.sp. Dianthi. En los dos métodos la pared del hongo se rompió con nitrógeno líquido, uno de ellos empleó como solución extractora bromuro de cetiltrimetil amonio (BCTA) y el otro una solución de sacarosa con altas concentraciones de protcasa y EDTA. Para la desproteinización ambos métodos utilizaron soluciones de fcnol-clorofonno y enzimas proteolítícas. El ADN obtenido se digirió con enzimas d...

  4. A Blumeria graminis f.sp. hordei BAC library - contig building and microsynteny studies

    DEFF Research Database (Denmark)

    Pedersen, C.; Wu, B.; Giese, H.

    2002-01-01

    A bacterial artificial chromosome (BAC) library of Blumeria graminis f.sp. hordei, containing 12,000 clones with an average insert size of 41 kb, was constructed. The library represents about three genome equivalents and BAC-end sequencing showed a high content of repetitive sequences, making...... contigs, at or close to avirulence loci, were constructed. Single nucleotide polymorphism (SNP) markers were developed from BAC-end sequences to link the contigs to the genetic maps. Two other BAC contigs were used to study microsynteny between B. graminis and two other ascomycetes, Neurospora crassa...

  5. Linguistic Effects of Globalization: A Case Study of French for Specific Purposes (FSP) in Kenyan Vocational Schools

    Science.gov (United States)

    Mulenda, Mubalama

    2013-01-01

    The study of French for Specific Purposes (FSP) is a topical subject in this era of globalization. Kenya requires people who can communicate in French in the various specialized areas. It has become crucial in Kenya to respond to the French language needs of students learning tourism and hospitality among other domains which have already shown an…

  6. Manufacturing and testing of full scale prototype for ITER blanket shield block

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sa-Woong, E-mail: swkim12@nfri.re.kr [ITER Korea, National Fusion Research Institute, Daejeon (Korea, Republic of); Kim, Duck-Hoi; Jung, Hun-Chea [ITER Korea, National Fusion Research Institute, Daejeon (Korea, Republic of); Lee, Sung-Ki [WONIL Co., Ltd., Haman (Korea, Republic of); Kang, Sung-Chan [POSCO Specialty Steel Co., Ltd., Changwon (Korea, Republic of); Zhang, Fu; Kim, Byoung-Yoon [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); Ahn, Hee-Jae; Lee, Hyeon-Gon; Jung, Ki-Jung [ITER Korea, National Fusion Research Institute, Daejeon (Korea, Republic of)

    2015-04-15

    Highlights: • 316L(N)-IG forged steel was successfully fabricated and qualified. • Related R&D activities were implemented to resolve the fabrication issues. • SB #8 FSP was successfully manufactured with conventional fabrication techniques. • All of the validation tests were carried out and met the acceptance criteria. - Abstract: Based on the preliminary design of the ITER blanket shield block (SB) #8, the full scale prototype (FSP) has been manufactured and tested in accordance with pre-qualification program, and related R&D was performed to resolve the technical issues of fabrication. The objective of the SB pre-qualification program is to demonstrate the acceptable manufacturing quality by successfully passing the formal test program. 316L(N)-IG stainless steel forging blocks with 1.80L × 1.12W × 0.43t (m) were developed by using an electric arc furnace, and as a result, the material properties were satisfied with technical specification. In the course of applying conventional fabrication techniques such as cutting, milling, drilling and welding of the forged stainless steel block for the manufacturing of the SB #8 FSP, several technical problems have been addressed. And also, the hydraulic connector of cross-forged material re-melted by electro slag or vacuum arc requires the application of advanced joining techniques such as automatic bore TIG and friction welding. Many technical issues – drilling, welding, slitting, non-destructive test and so on – have been raised during manufacturing. Associated R&D including the computational simulation and coupon testing has been done in collaboration with relevant industries in order to resolve these engineering issues. This paper provides technical key issues and their possible resolutions addressed during the manufacture and formal test of the SB #8 FSP, and related R&D.

  7. Pengendalian Hayati Penyakit Layu Fusarium Pisang (Fusarium Oxysporum F.sp. Cubense) dengan Trichoderma SP.

    OpenAIRE

    Sudirman, Albertus; Sumardiyono, Christanti; Widyastuti, Siti Muslimah

    2011-01-01

    The aim of this research was to study the inhibiting ability of Trichoderma sp. to control fusarium wilt of banana in greenhouse condition. The experiments consisted of the antagonism test between Trichoderma sp. and Fusarium oxysporum f.sp. cubense (Foc) in vitro using dual culture method and glass house experiment which was arranged in 3×3 Factorial Complete Randomized Design. First factor of the latter experiment was the dose of Trichoderma sp. culture (0, 25, and 50 g per polybag), second...

  8. Differential gene expression in loblolly pine (Pinus taeda L.) challenged with the fusiform rust fungus, Cronartium quercuum f.sp. fusiforme

    Science.gov (United States)

    Henrietta Myburg; Alison M. Morse; Henry V. Amerson; Thomas L. Kubisiak; Dudley Huber; Jason A. Osborne; Saul A. Garcia; C. Dana Nelson; John M. Davis; Sarah F. Covert; Leonel M. van Zyle

    2006-01-01

    Cronartium quercuum f.sp. fusiforme is the pathogen that incites fusiform rust disease of southern pine species. To date, a number of host resistance genes have been mapped. Although genomic mapping studies have provided valuable information on the genetic basis of disease interactions in this pine-rust pathosystem, the interaction...

  9. Genetic variation in Danish populations of Erysiphe graminis f.sp. hordei: estimation of gene diversity and effective population size using RFLP data

    DEFF Research Database (Denmark)

    Damgaard, C.; Giese, Nanna Henriette

    1996-01-01

    Genetic variation of the barley powdery mildew fungus (Erysiphe graminis f.sp. hordei) was estimated in three Danish local populations. Genetic variation was estimated from the variation amongst clones of Egh, and was therefore an estimate of the maximum genetic variation in the local populations...

  10. Aperfeiçoamento da técnica de Soldagem Pontual por Fricção (FSpW para união de poliamida 6 e laminado de poliamida 66 com fibra de carbono

    Directory of Open Access Journals (Sweden)

    Joel Gonçalves

    2014-03-01

    Full Text Available A Soldagem Pontual por Fricção ('Friction Spot Welding - FSpW' é uma técnica inovadora que foi desenvolvida e patenteada em 2005 pelo centro de pesquisa alemão Helmholtz Zentrum Geesthacht (HZG. A técnica apresenta ciclos rápidos, baixo custo operacional e gera soldas com alto desempenho mecânico. Foi inicialmente projetada para a soldagem de ligas metálicas leves. A soldagem de polímeros é alvo de pesquisas recentes e a soldagem de compósitos poliméricos por FSpW ainda é inédita. Este estudo demonstrou a viabilidade técnica da soldagem de chapa de poliamida 6 (PA6 e laminado de poliamida 66 e fibra de carbono (CF-PA66 por FSpW. O histórico térmico, o acabamento superficial, a microestrutura da região da solda e a resistência mecânica ao cisalhamento de juntas sobrepostas PA6/CF-PA66 foram investigados. O aumento do tamanho do anel de fixação da ferramenta original, projetada para a soldagem de metais, possibilitou a seleção de parâmetros de soldagem que resultaram em grande aporte térmico, resultando no aumento da área soldada, num menor entalhe (inscrição deixado pela ferramenta na amostra, produzindo melhoria no acabamento superficial da solda. Essa otimização resultou em uma junta PA6/CF-PA66 com resistência ao cisalhamento de 35 MPa (2196 N, com fratura predominante na placa superior de PA6.

  11. Nitrate assimilation pathway (NAP): role of structural (nit) and transporter (ntr1) genes in Fusarium oxysporum f.sp. lycopersici growth and pathogenicity.

    Science.gov (United States)

    Gomez-Gil, Lucia; Camara Almiron, Jesus; Rodriguez Carrillo, Patricia Lizett; Olivares Medina, Cindy Nayely; Bravo Ruiz, Gustavo; Romo Rodriguez, Pamela; Corrales Escobosa, Alma Rosa; Gutierrez Corona, Felix; Roncero, M Isabel

    2018-04-01

    The tomato pathogen Fusarium oxysporum f.sp. lycopersici possesses the capability to use nitrate as the only nitrogen source under aerobic and anaerobic conditions and to activate virulence-related functions when cultivated in the presence of nitrate, but not in ammonium. The genome of F. oxysporum f.sp. lycopersici encodes three paralogs nitrate reductase (NR) genes (nit1, nit2 and nit3) and one predicted ortholog of the Aspergillus nidulans high-affinity nitrate/nitrite transporters NtrA and NtrB, named ntr1. We set out to clarify the role of nit1, nit2, nit3 and ntr1 genes in nitrate assimilation and in the virulence of F. oxysporum f.sp. lycopersici. Quantitative RT-PCR analysis revealed that only nit1, nit2 and ntr1 are expressed at significant levels during growth in nitrate as the only nitrogen source. Targeted deletion of nit1 and ntr1, but not of nit2 or nit3, severely impaired growth of F. oxysporum on nitrate as nitrogen source, indicating that Nit1 and Ntr1 proteins are involved in nitrate assimilation by the fungus; biochemical analysis of nit mutants indicated that Nit1 and Nit2 enzymes contribute to about 50 and 30% of the total NR activity, respectively. In addition, a spontaneous chlorate-resistant mutant derived from F. oxysporum 4287, denoted NitFG, was characterized, showing inability to grow in nitrate under aerobic and anaerobic conditions and low levels of NR activity, in spite of its increased transcription levels of nit1 and nit2 genes. Tomato plant infection assays showed that NitFG and ∆ntr1 mutants induced an earlier death in tomato plants, whereas the single mutants ∆nit1, ∆nit2 and ∆nit1∆nit2 double mutant showed a mortality rate similar to the wild-type strain. Taken together, these results indicate that the Nit1 and Ntr1 proteins are important for nitrate assimilation of F. oxysporum f.sp. lycopersici incubated under aerobic and anaerobic conditions and that this metabolic process is not essential for the virulence of

  12. The theory behind the full scattering profile

    Science.gov (United States)

    Feder, Idit; Duadi, Hamootal; Fixler, Dror

    2018-02-01

    Optical methods for extracting properties of tissues are commonly used. These methods are non-invasive, cause no harm to the patient and are characterized by high speed. The human tissue is a turbid media hence it poses a challenge for different optical methods. In addition the analysis of the emitted light requires calibration for achieving accuracy information. Most of the methods analyze the reflected light based on their phase and amplitude or the transmitted light. We suggest a new optical method for extracting optical properties of cylindrical tissues based on their full scattering profile (FSP), which means the angular distribution of the reemitted light. The FSP of cylindrical tissues is relevant for biomedical measurement of fingers, earlobes or pinched tissues. We found the iso-pathlength (IPL) point, a point on the surface of the cylinder medium where the light intensity remains constant and does not depend on the reduced scattering coefficient of the medium, but rather depends on the spatial structure and the cylindrical geometry. However, a similar behavior was also previously reported in reflection from a semi-infinite medium. Moreover, we presented a linear dependency between the radius of the tissue and the point's location. This point can be used as a self-calibration point and thus improve the accuracy of optical tissue measurements. This natural phenomenon has not been investigated before. We show this phenomenon theoretically, based on the diffusion theory, which is supported by our simulation results using Monte Carlo simulation.

  13. A finite state projection algorithm for the stationary solution of the chemical master equation

    Science.gov (United States)

    Gupta, Ankit; Mikelson, Jan; Khammash, Mustafa

    2017-10-01

    The chemical master equation (CME) is frequently used in systems biology to quantify the effects of stochastic fluctuations that arise due to biomolecular species with low copy numbers. The CME is a system of ordinary differential equations that describes the evolution of probability density for each population vector in the state-space of the stochastic reaction dynamics. For many examples of interest, this state-space is infinite, making it difficult to obtain exact solutions of the CME. To deal with this problem, the Finite State Projection (FSP) algorithm was developed by Munsky and Khammash [J. Chem. Phys. 124(4), 044104 (2006)], to provide approximate solutions to the CME by truncating the state-space. The FSP works well for finite time-periods but it cannot be used for estimating the stationary solutions of CMEs, which are often of interest in systems biology. The aim of this paper is to develop a version of FSP which we refer to as the stationary FSP (sFSP) that allows one to obtain accurate approximations of the stationary solutions of a CME by solving a finite linear-algebraic system that yields the stationary distribution of a continuous-time Markov chain over the truncated state-space. We derive bounds for the approximation error incurred by sFSP and we establish that under certain stability conditions, these errors can be made arbitrarily small by appropriately expanding the truncated state-space. We provide several examples to illustrate our sFSP method and demonstrate its efficiency in estimating the stationary distributions. In particular, we show that using a quantized tensor-train implementation of our sFSP method, problems admitting more than 100 × 106 states can be efficiently solved.

  14. A finite state projection algorithm for the stationary solution of the chemical master equation.

    Science.gov (United States)

    Gupta, Ankit; Mikelson, Jan; Khammash, Mustafa

    2017-10-21

    The chemical master equation (CME) is frequently used in systems biology to quantify the effects of stochastic fluctuations that arise due to biomolecular species with low copy numbers. The CME is a system of ordinary differential equations that describes the evolution of probability density for each population vector in the state-space of the stochastic reaction dynamics. For many examples of interest, this state-space is infinite, making it difficult to obtain exact solutions of the CME. To deal with this problem, the Finite State Projection (FSP) algorithm was developed by Munsky and Khammash [J. Chem. Phys. 124(4), 044104 (2006)], to provide approximate solutions to the CME by truncating the state-space. The FSP works well for finite time-periods but it cannot be used for estimating the stationary solutions of CMEs, which are often of interest in systems biology. The aim of this paper is to develop a version of FSP which we refer to as the stationary FSP (sFSP) that allows one to obtain accurate approximations of the stationary solutions of a CME by solving a finite linear-algebraic system that yields the stationary distribution of a continuous-time Markov chain over the truncated state-space. We derive bounds for the approximation error incurred by sFSP and we establish that under certain stability conditions, these errors can be made arbitrarily small by appropriately expanding the truncated state-space. We provide several examples to illustrate our sFSP method and demonstrate its efficiency in estimating the stationary distributions. In particular, we show that using a quantized tensor-train implementation of our sFSP method, problems admitting more than 100 × 10 6 states can be efficiently solved.

  15. Pengendalian Hayati Penyakit Layu Fusarium Pisang (Fusarium oxysporum f.sp. cubense dengan Trichoderma sp.

    Directory of Open Access Journals (Sweden)

    Albertus Sudirman

    2011-07-01

    Full Text Available The aim of this research was to study the inhibiting ability of Trichoderma sp. to control fusarium wilt of banana in greenhouse condition. The experiments consisted of the antagonism test between Trichoderma sp. and Fusarium oxysporum f.sp. cubense (Foc in vitro using dual culture method and glass house experiment which was arranged in 3×3 Factorial Complete Randomized Design. First factor of the latter experiment was the dose of Trichoderma sp. culture (0, 25, and 50 g per polybag, second factor was time of Trichoderma culture application (2 weeks before Foc inoculation, at same time with Foc inoculation and 2 weeks after Foc inoculation. Trichoderma sp. was cultured in mixed rice brand and chaff medium. The disease intensity was observed with scoring system of wilting leaves (0–4. The results showed that Trichoderma sp. was antagonistic against Foc in vitro and inhibited 86% of Foc colony development. Mechanism of antagonism between Trichoderma sp. and Foc was hyperparasitism. Trichoderma hyphae coiled around Foc hyphae. Lysis of Foc hyphae was occurred at the attached site of Trichoderma hyphae on Foc hyphae. Added banana seedling with Trichoderma sp. Culture reduced disease intensity of Fusarium wilt. Suggested dose of Trichoderma culture application in glass house was 25 g/polybag, given at the same time with Foc inoculation. Penelitian ini bertujuan untuk mengetahui kemampuan Trichoderma sp. untuk pengendalian penyakit layu fusarium pisang di rumah kaca. Penelitian meliputi pengujian daya hambat Fusarium oxysporum f.sp. cubense (Foc in vitro dan kemampuan menekan intensitas penyakit di rumah kaca. Penelitian in vitro meliputi uji antagonisme dan mekanismenya yang dilakukan secara dual culture. Uji pengaruh Trichoderma sp. terhadap penyakit layu Fusarium dilakukan di rumah kaca dengan Rancangan Acak Lengkap Faktorial. Faktor pertama adalah dosis biakan Trichoderma sp., dengan tiga aras (0, 25, 50 g/per bibit dalam polibag. Faktor kedua

  16. Efecto de los procesos de compostacion y lombricultura de residuos de clavel sobre la población de Fusarium oxysporum f.sp. dianthi Effect of the processes of composting and lombricomposting of carnation residues on the population of Fusarium oxysporum f.sp. dianthi

    Directory of Open Access Journals (Sweden)

    Pardo Fabio Alejandro

    1998-12-01

    Full Text Available El manejo de los residuos vegetales es uno de los problemas que actualmente enfrenta la floricultura colombiana. El objetivo de la investigación fue estudiar el efecto de la descomposición de residuos de clavel mediante los procesos de compostación y lombricultura sobre la población de Fusarium oxysporum en una finca productora de flores
    localizada en la Sabana de Bogotá. Los procesos de compostación y lombricultura redujeron de manera apreciable la población del hongo, obteniéndose la mayor reducción en el tratamiento de plantas de rosa más plantas de clavel enfermo. De 235 aislamientos de F oxysporum inoculados en esquejes de clavel de la variedad "Navidad", 37 (16% fueron patogénicos y pertenecen a F. oxysporum f.sp. dianthi, mientras que 198 aislamientos (84% correspondieron a formas no patogénicas de F oxysporum o a formas patogénicas de la especie, diferentes a la forma especial dianthi. La utilización de compost o de humus de lombriz que provenga de plantas enfermas de clavel presenta riesgos fitopatológicos importantes para su aplicación al suelo.The management of plant residues is a very important problem of the Colombian floriculture. The objetive of the research was to study the effect of descomposition of carnation plant residues with the processes of compostation and lombricompostation on the population of Fusarium oxysporum on a commercial farm located at the Bogota Plateau. Compostation and lombricompostation processes reduced significantly the population of Foxysporum. The highest reduction was obtained with the treatment of a mixture of rose plants plus carnation diseased plants. From 235 isolates of F. oxysporum inoculated on carnation cuttings of the variety "Navidad", 37 (16% were pathogenic and belong to F oxysporum f.sp. dianthi, 198 isolates (84% did not cause disease on carnation plants, so they belong to other formae specialis or they are nonpathogenic isolates of Foxysporum. The application of

  17. Fission Surface Power System Initial Concept Definition

    Science.gov (United States)

    2010-01-01

    Under the NASA Exploration Technology Development Program (ETDP) and in partnership with the Department of Energy (DOE), NASA has embarked on a project to develop Fission Surface Power (FSP) technology. The primary goals of the project are to 1) develop FSP concepts that meet expected surface power requirements at reasonable cost with added benefits over other options, 2) establish a hardwarebased technical foundation for FSP design concepts and reduce overall development risk, 3) reduce the cost uncertainties for FSP and establish greater credibility for flight system cost estimates, and 4) generate the key products to allow NASA decision-makers to consider FSP as a preferred option for flight development. The FSP project was initiated in 2006 as the Prometheus Program and the Jupiter Icy Moons Orbiter (JIMO) mission were phased-out. As a first step, NASA Headquarters commissioned the Affordable Fission Surface Power System Study to evaluate the potential for an affordable FSP development approach. With a cost-effective FSP strategy identified, the FSP team evaluated design options and selected a Preliminary Reference Concept to guide technology development. Since then, the FSP Preliminary Reference Concept has served as a point-of-departure for several NASA mission architecture studies examining the use of nuclear power and has provided the foundation for a series of "Pathfinder" hardware tests. The long-term technology goal is a Technology Demonstration Unit (TDU) integrated system test using full-scale components and a non-nuclear reactor simulator. The FSP team consists of Glenn Research Center (GRC), Marshall Space Flight Center (MSFC) and the DOE National Laboratories at Los Alamos (LANL), Idaho (INL), Oak Ridge (ORNL), and Sandia (SNL). The project is organized into two main elements: Concept Definition and Risk Reduction. Under Concept Definition, the team performs trade studies, develops analytical tools, and formulates system concepts. Under Risk

  18. Spatially explicit models of full-season productivity and implications for landscape management of Golden-winged Warblers in the western Great Lakes Region: Chapter 9

    Science.gov (United States)

    Peterson, Sean M.; Streby, Henry M.; Andersen, David E.

    2016-01-01

    The relationship between landscape structure and composition and full-season productivity (FSP) is poorly understood for most birds. For species of high conservation concern, insight into how productivity is related to landscape structure and composition can be used to develop more effective conservation strategies that increase recruitment. We monitored nest productivity and fledgling survival of Golden-winged Warblers (Vermivora chrysoptera), a species of high conservation concern, in managed forest landscapes at two sites in northern Minnesota, and one site in southeastern Manitoba, Canada from 2010 to 2012. We used logistic exposure models to identify the influence of landscape structure and composition on nest productivity and fledgling survival. We used the models to predict spatially explicit, FSP across our study sites to identify areas of low relative productivity that could be targeted for management. We then used our models of spatially explicit, FSP to simulate the impact of potential management actions on our study sites with the goal of increasing total population productivity. Unlike previous studies that suggested wetland cover types provide higher quality breeding habitat for Golden-winged Warblers, our models predicted 14% greater productivity in upland cover types. Simulated succession of a 9-ha grassland patch to a shrubby upland suitable for nesting increased the total number of fledglings produced by that patch and adjacent upland shrublands by 30%, despite decreasing individual productivity by 13%. Further simulated succession of the same patch described above into deciduous forest reduced the total number of fledglings produced to independence on a landscape by 18% because of a decrease in the area available for nesting. Simulated reduction in the cumulative length of shrubby edge within a 50-m radius of any location in our landscapes from 0.6 to 0.3 km increased FSP by 5%. Our models demonstrated that the effects of any single management

  19. [Effect of aeration on composting of date palm residues contaminated with Fusarium oxysporum f.sp. albedinis].

    Science.gov (United States)

    Chakroune, K; Bouakka, M; Hakkou, A

    2005-01-01

    Composting of date palm (Phoenix dactylifera L.) residues contaminated with Fusarium f.sp oxysporum albedinis, causal agent of the vascular wilt (Bayoud) of the date palm, has been achieved. The effect of the aeration of the piles by manual turning has been studied. The maintenance of an adequate humidity of 60%-70%, necessary to the good progress of the composting process, required the contribution of 11.4 L of water/kg of the dried residues. The evolution of the temperatures in the three piles presents the same phases. A latency phase, followed after 2-3 d of composting by a thermophilic phase, which lasts about 24 d, where the temperature remains elevated between 50 and 70 degrees C. Then a cooling phase that takes about 15 d, during which the temperatures fall to values between 25 and 35 degrees C, near room temperature. Fusarium f.sp oxysporum albedinis is eliminated completely during the thermophilic phase of composting, and increasing frequencies of turning accelerate its disappearance to a certain extent. On the other hand, pH remained steady and relatively basic oscillating between 8.2 and 8.7. Ninety percent (90%) of the the date palm residues are composed exclusively of organic matters. The total nitrogen represents only 0.4%. The contribution of manure decreases the ratio of carbon to nitrogen (C/N) from 115 to 48 in the initial mixture. After 80 d of composting and according to the frequency of return up, there is a reduction of the granulometry of the substratum, the C/N ratio (from 29% to 44%), the organic matter (from 15% to 23%), the total volume (from 25% to 35%), and of the dry weight of the swaths (from 16% to 24%). On the other hand there is an increase in total nitrogen rate (from 20% to 40%) and in the mineral matter (from 23% to 35%).

  20. Dynamics of Colonization and Expression of Pathogenicity Related Genes in Fusarium oxysporum f.sp. ciceri during Chickpea Vascular Wilt Disease Progression.

    Directory of Open Access Journals (Sweden)

    Medha L Upasani

    Full Text Available Fusarium wilt caused by Fusarium oxysporum f.sp. ciceri (Foc is a constant threat to chickpea productivity in several parts of the world. Understanding the molecular basis of chickpea-Foc interaction is necessary to improve chickpea resistance to Foc and thereby the productivity of chickpea. We transformed Foc race 2 using green fluorescent protein (GFP gene and used it to characterize pathogen progression and colonization in wilt-susceptible (JG62 and wilt-resistant (Digvijay chickpea cultivars using confocal microscopy. We also employed quantitative PCR (qPCR to estimate the pathogen load and progression across various tissues of both the chickpea cultivars during the course of the disease. Additionally, the expression of several candidate pathogen virulence genes was analyzed using quantitative reverse transcriptase PCR (qRT-PCR, which showed their characteristic expression in wilt-susceptible and resistant chickpea cultivars. Our results suggest that the pathogen colonizes the susceptible cultivar defeating its defense; however, albeit its entry in the resistant plant, further proliferation is severely restricted providing an evidence of efficient defense mechanism in the resistant chickpea cultivar.

  1. Genetic relatedness of Trichoderma isolates antagonistic against Fusarium oxysporum f.sp. dianthi inflicting carnation wilt.

    Science.gov (United States)

    Shanmugam, V; Sharma, Vivek; Ananthapadmanaban

    2008-01-01

    Twenty-eight isolates of Trichoderma belonging to four different species were screened in vitro for their antagonistic ability against Fusarium oxysporum f.sp. dianthi causing carnation wilt. Three different levels of antagonism observed in dual plate assay were further confirmed by cell-free culture filtrate experiments. Isolates showing class I level of antagonism produced maximum lytic enzymes, chitinases and beta-1,3-glucanases. Genetic variability of 25 selected isolates was assessed by random amplified polymorphic DNA technique and the amplified products were correlated for their level of antagonism. Unweighed pair-group method with arithmetical averages cluster analysis revealed prominent inter-and intraspecific genetic variation among the isolates. Based on their genetic relationship, the isolates were mainly distributed into 3 major groups representing T. atroviride, T. pseudokoningii and T. harzianum, with 20-35% interspecific dissimilarity. However, the polymorphism shown by the isolates did not correlate to their level of antagonism.

  2. Full Space Vectors Modulation for Nine-Switch Converters Including CF & DF Modes

    DEFF Research Database (Denmark)

    Dehghan Dehnavi, Seyed Mohammad; Mohamadian, Mustafa; Andersen, Michael A. E.

    2010-01-01

    converter. As a space vector modulation for DF mode has already been proposed by authors. This paper proposes a full space vector modulation (SVM) for both CF and DF modes. Also practical methods are presented for SVM proposed. In addition a special SVM is proposed that offers minimum total harmonic...... distortion (THD) in DF mode. The performance of the proposed SVM is verified by simulation results....

  3. On low-complexity full-diversity detection of multi-user space-time coding

    KAUST Repository

    Ismail, Amr

    2013-06-01

    The incorporation of multiple input multiple output (MIMO) schemes in recent wireless communication standards paved the way to exploit the newly introduced dimension (i.e. space) to efficiently cancel the interference without requiring additional resources. In this paper, we focus on multiple input multiple ouitput (MIMO) multiple access channel (MAC) case and we answer the question about whether it is possible to suppress the interference in a MIMO MAC channel for completely blind users while achieving full-diversity with a simplified decoder in the affirmative. In fact, this goal can be attained by employing space-time block codes (STBC)s that achive full-diversity under partial interference cancellation (PIC). We derive sufficient conditions for a wide range of STBCs to achieve full-diversity under PIC group decoding with or without successive interference cancellation (SIC). Based on the provided design criteria we derive an upper-bound on the achievable rate for a class of codes. A two-user MIMO MAC interference cancellation scheme is presented and proved to achieve full-diversity under PIC group decoding. We compare our scheme to existing beamforming schemes with full or limit feedback. © 2013 IEEE.

  4. Effects of nitrogen source availability and bioreactor operating strategies on lutein production with Scenedesmus obliquus FSP-3.

    Science.gov (United States)

    Ho, Shih-Hsin; Xie, Youping; Chan, Ming-Chang; Liu, Chen-Chun; Chen, Chun-Yen; Lee, Duu-Jong; Huang, Chieh-Chen; Chang, Jo-Shu

    2015-05-01

    In this study, the effects of the type and concentration of nitrogen sources on the cell growth and lutein content of an isolated microalga Scenedesmus obliquus FSP-3 were investigated. With batch culture, the highest lutein content (4.61 mg/g) and lutein productivity (4.35 mg/L/day) were obtained when using 8.0 mM calcium nitrate as the nitrogen source. With this best nitrogen source condition, the microalgae cultivation was performed using two bioreactor strategies (namely, semi-continuous and two-stage operations) to further enhance the lutein content and productivity. Using semi-continuous operation with a 10% medium replacement ratio could obtain the highest biomass productivity (1304.8 mg/L/day) and lutein productivity (6.01 mg/L/day). This performance is better than most related studies. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. Priming of seeds with methyl jasmonate induced resistance to hemi-biotroph Fusarium oxysporum f.sp. lycopersici in tomato via 12-oxo-phytodienoic acid, salicylic acid, and flavonol accumulation.

    Science.gov (United States)

    Król, P; Igielski, R; Pollmann, S; Kępczyńska, E

    2015-05-01

    Methyl jasmonate (MeJA) was tested by seed treatment for its ability to protect tomato seedlings against fusarium wilt caused by the soil-borne fungal pathogen Fusarium oxysporum f.sp. lycopersici. Isolated from Solanum lycopersicon L. seeds, cv. Beta fungus was identified as F. oxysporum f.sp. lycopersici Race 3 fungus by using phytopathological and molecular methods. MeJA applied at 0.01, 0.1 and 1 mM reduced spore germination and mycelial growth in vitro. Soaking of tomato seeds in MeJA solution at 0.1 mM for 1 h significantly enhanced the resistance level against the tested fungus in tomato seedlings 4 weeks after inoculation. The extracts from leaves of 15-day-old seedlings obtained from previously MeJA soaked seeds had the ability to inhibit in vitro spore germination of tested fungus. In these seedlings a significant increase in the levels phenolic compounds such as salicylic acid (SA), kaempferol and quercetin was observed. Up-regulation of phenylalanine ammonia-lyase (PAL5) and benzoic acid/salicylic acid carboxyl methyltransferase (BSMT) genes and down-regulation of the isochorysmate synthase (ICS) gene in response to exogenous MeJA application indicate that the phenylalanine ammonia-lyase (PAL), not the isochorismate (IC) pathway, is the primary route for SA production in tomato. Moreover, the increased accumulation of the flavonols quercetin and kaempferol appears closely related to the increase of PAL5, chalcone synthase (CHS) and flavonol synthase/flavanone 3-hydroxylase-like (FLS) genes. Elevated levels of salicylic acid in seedlings raised from MeJA-soaked seeds were simultaneously accompanied by a decrease of jasmonic acid, the precursor of MeJA, and an increase of 12-oxo-phytodienoic acid (OPDA), the precursor of jasmonic acid. The present results indicate that the priming of tomato seeds with 0.1mM MeJA before sowing enables the seedlings grown from these seeds to reduce the attack of the soil-borne fungal pathogen F. oxysporum f.sp. lycopersici

  6. Analytical model for vibration prediction of two parallel tunnels in a full-space

    Science.gov (United States)

    He, Chao; Zhou, Shunhua; Guo, Peijun; Di, Honggui; Zhang, Xiaohui

    2018-06-01

    This paper presents a three-dimensional analytical model for the prediction of ground vibrations from two parallel tunnels embedded in a full-space. The two tunnels are modelled as cylindrical shells of infinite length, and the surrounding soil is modelled as a full-space with two cylindrical cavities. A virtual interface is introduced to divide the soil into the right layer and the left layer. By transforming the cylindrical waves into the plane waves, the solution of wave propagation in the full-space with two cylindrical cavities is obtained. The transformations from the plane waves to cylindrical waves are then used to satisfy the boundary conditions on the tunnel-soil interfaces. The proposed model provides a highly efficient tool to predict the ground vibration induced by the underground railway, which accounts for the dynamic interaction between neighbouring tunnels. Analysis of the vibration fields produced over a range of frequencies and soil properties is conducted. When the distance between the two tunnels is smaller than three times the tunnel diameter, the interaction between neighbouring tunnels is highly significant, at times in the order of 20 dB. It is necessary to consider the interaction between neighbouring tunnels for the prediction of ground vibrations induced underground railways.

  7. Calibration of the central jet chamber of the OPAL detector with UV laser beams: Methods and results on jet chamber prototypes (FSP)

    International Nuclear Information System (INIS)

    Hauschild, M.

    1988-11-01

    The central tracking device of the OPAL experiment at the LEP e + e - -collider consists of a pictorial jet chamber with a diameter of 4 m and 4 m length. The calibration of such a large detector is performed by the help of a UV laser system generating straight tracks even in the presence of magnetic fields. Intensive investigations of the laser calibration power and performance were done at the Full Scale Prototype (FSP) of the OPAL jet chamber. Laser double tracks with a precisely known distance are used to determine the drift velocity with an accuracy of 0.1%. From the measured deviations of a straight laser track electronic time offsets, wire positions and field distortions are derived. These calibration constants were applied to correct the measured drift times of test beam events. The sagitta and momentum resolutions of the thus corrected tracks have been obtained in the range from 6 GeV/c to 50 GeV/c. Extrapolating the results to the final OPAL jet chamber, a momentum resolution of σ-p/p = 6% is expected for 50 GeV/c tracks in a magnetic field of 4 kG. (orig.) [de

  8. A rapid genotyping method for an obligate fungal pathogen, Puccinia striiformis f.sp. tritici, based on DNA extraction from infected leaf and Multiplex PCR genotyping

    Directory of Open Access Journals (Sweden)

    Enjalbert Jérôme

    2011-07-01

    Full Text Available Abstract Background Puccinia striiformis f.sp. tritici (PST, an obligate fungal pathogen causing wheat yellow/stripe rust, a serious disease, has been used to understand the evolution of crop pathogen using molecular markers. However, numerous questions regarding its evolutionary history and recent migration routes still remains to be addressed, which need the genotyping of a large number of isolates, a process that is limited by both DNA extraction and genotyping methods. To address the two issues, we developed here a method for direct DNA extraction from infected leaves combined with optimized SSR multiplexing. Findings We report here an efficient protocol for direct fungal DNA extraction from infected leaves, avoiding the costly and time consuming step of spore multiplication. The genotyping strategy we propose, amplified a total of 20 SSRs in three Multiplex PCR reactions, which were highly polymorphic and were able to differentiate different PST populations with high efficiency and accuracy. Conclusion These two developments enabled a genotyping strategy that could contribute to the development of molecular epidemiology of yellow rust disease, both at a regional or worldwide scale.

  9. Amenability of European silver fir (Abies alba Mill.) to preservative treatment by the full-cell process in longitudinal, tangential, radial and triplex flow pathways on the base of wood drying

    Energy Technology Data Exchange (ETDEWEB)

    Usta, Ilker [Wood Products Industrial Engineering, Hacettepe University, 06532-Beytepe, Ankara (Turkey)

    2006-08-15

    This paper discusses the effects of wood drying upon treatability (as determined by preservative uptake and gain-in-weight retention) of European silver fir on the two moisture content (MC) levels which were designed to be above and below the fibre saturation point (FSP). The treatability behaviour was investigated for individual flow pathways: longitudinal (L, along the stem), tangential (T, along the growth rings) and radial (R, along the rays), and also for the triplex (t, cumulative of all three directions: all faces left open). As the FSP was observed 32.7%, MC of the experimental samples-for each flow path-nominated to around 50% and 9% by recommended kiln drying schedule using a conventional kiln. The samples were then treated with a 2.5% concentration of commercial Tanalith C of CCA (chromium/copper/arsenic) via a mild schedule of full-cell impregnation process using a model pressure treatment plant. Treatability of European silver fir was noticed in different behaviour in either flow paths before and after drying. According to the experimental results, MC regulate the preservative uptake (as the percentage of void volume filled with preservative, VVF%) along the grain (L) and VVF% was improved by kiln drying process effectively, however, it was seemed to be contradictory across the grain (in both T and R). In the cumulative form (t), treatability-in either above or below the FSP-was appeared to be slightly greater than that for L due to support of the longitudinal flow. Therefore, it could be suggested that wood material which is subjected to be used in constructional purposes has to be initially dried to below the FSP, and - for efficient preservative treatment - it has to be treated with all faces unsealed (free from any pre-coating and/or painting). This shall be more ideal which in turn influences the quality of treated wood allowing better performance in its service life. (author)

  10. Expectations in multi-particle production in hh collisions in the TeV energy region. Full phase space

    International Nuclear Information System (INIS)

    Giovannini, A.

    1999-01-01

    First results of our programme of investigation of final charged particles multiplicity distributions properties in the TeV region and related correlation structure in hadron hadron collisions in full phase space, in rapidity and in transverse momentum intervals, are discussed. Attention is limited here to full phase space only-Huge (mini-)jets production is the main expectation in all examined scenarios. (author)

  11. Near-Space TOPSAR Large-Scene Full-Aperture Imaging Scheme Based on Two-Step Processing

    Directory of Open Access Journals (Sweden)

    Qianghui Zhang

    2016-07-01

    Full Text Available Free of the constraints of orbit mechanisms, weather conditions and minimum antenna area, synthetic aperture radar (SAR equipped on near-space platform is more suitable for sustained large-scene imaging compared with the spaceborne and airborne counterparts. Terrain observation by progressive scans (TOPS, which is a novel wide-swath imaging mode and allows the beam of SAR to scan along the azimuth, can reduce the time of echo acquisition for large scene. Thus, near-space TOPS-mode SAR (NS-TOPSAR provides a new opportunity for sustained large-scene imaging. An efficient full-aperture imaging scheme for NS-TOPSAR is proposed in this paper. In this scheme, firstly, two-step processing (TSP is adopted to eliminate the Doppler aliasing of the echo. Then, the data is focused in two-dimensional frequency domain (FD based on Stolt interpolation. Finally, a modified TSP (MTSP is performed to remove the azimuth aliasing. Simulations are presented to demonstrate the validity of the proposed imaging scheme for near-space large-scene imaging application.

  12. Full space device optimization for solar cells.

    Science.gov (United States)

    Baloch, Ahmer A B; Aly, Shahzada P; Hossain, Mohammad I; El-Mellouhi, Fedwa; Tabet, Nouar; Alharbi, Fahhad H

    2017-09-20

    Advances in computational materials have paved a way to design efficient solar cells by identifying the optimal properties of the device layers. Conventionally, the device optimization has been governed by single or double descriptors for an individual layer; mostly the absorbing layer. However, the performance of the device depends collectively on all the properties of the material and the geometry of each layer in the cell. To address this issue of multi-property optimization and to avoid the paradigm of reoccurring materials in the solar cell field, a full space material-independent optimization approach is developed and presented in this paper. The method is employed to obtain an optimized material data set for maximum efficiency and for targeted functionality for each layer. To ensure the robustness of the method, two cases are studied; namely perovskite solar cells device optimization and cadmium-free CIGS solar cell. The implementation determines the desirable optoelectronic properties of transport mediums and contacts that can maximize the efficiency for both cases. The resulted data sets of material properties can be matched with those in materials databases or by further microscopic material design. Moreover, the presented multi-property optimization framework can be extended to design any solid-state device.

  13. ITER operational space for full plasma current H-mode operation

    Energy Technology Data Exchange (ETDEWEB)

    Mattei, M. [Assoc. Euratom-ENEA-CREATE, Seconda University di Napoli, Aversa (Italy)], E-mail: massimiliano.mattei@unirc.it; Cavinato, M.; Saibene, G.; Portone, A. [Fusion for Energy Joint Undertaking, 08019 Barcelona (Spain); Albanese, R.; Ambrosino, G. [Assoc. Euratom-ENEA-CREATE, University Napoli Federico II, Napoli (Italy); Horton, L.D. [Max Planck-Institut fur Plasmaphysik, EURATOM-Association, Garching (Germany); Kessel, C. [Princeton Plasma Physics Laboratory, Princeton University (United States); Koechl, F. [Assoc. EURATOM-OAW/ATI, Vienna (Austria); Lomas, P.J. [Euratom/UKAEA Fusion Assoc., Culham Science Centre, Abingdon, Oxon OX14 3DB (United Kingdom); Nunes, I. [Assoc. EURATOM/IST, Centro de Fusao Nuclear, Lisbon (Portugal); Parail, V. [Max Planck-Institut fur Plasmaphysik, EURATOM-Association, Garching (Germany); Sartori, R. [Fusion for Energy Joint Undertaking, 08019 Barcelona (Spain); Sips, A.C.C. [Max Planck-Institut fur Plasmaphysik, EURATOM-Association, Garching (Germany); Thomas, P.R. [Fusion for Energy Joint Undertaking, 08019 Barcelona (Spain)

    2009-06-15

    Sensitivity studies performed as part of the ITER IO design review highlighted a very stiff dependence of the maximum Q attainable on the machine parameters. In particular, in the considered range, the achievable Q scales with I{sub p}{sup 4}. As a consequence, the achievement of the ITER objective of Q = 10 requires the machine to be routinely operated at a nominal current I{sub p} of 15 MA, and at full toroidal field BT of 5.3 T. This paper analyses the capabilities of the poloidal field (PF) system (including the central solenoid) of ITER against realistic full current plasma scenarios. An exploration of the ITER operational space for the 15 and 17 MA inductive scenario is carried out. An extensive analysis includes the evaluation of margins for the closed loop shape control action. The overall results of this analysis indicate that the control of a 15 MA plasma in ITER is likely to be adequate in the range of li 0.7-0.9 whereas, for a 17 MA plasma, control capabilities are strongly reduced. The ITER operational space, provided by the reference pre-2008 PF system, was rather limited if compared to the range of parameters normally observed in present experiment. Proposals for increasing the current and field limits on PF2, PF5 and PF6, adjustment on the number of turns in some of the PF coils, changes to the divertor dome geometry, to the conductor of PF6 to Nb3Sn, moving PF6 radially and/or vertically are described and evaluated in the paper. Some of them have been included in 2008 ITER revised configuration.

  14. Effect of corn steep liquor on lettuce root rot (Fusarium oxysporum f.sp. lactucae) in hydroponic cultures.

    Science.gov (United States)

    Chinta, Yufita D; Kano, Kazuki; Widiastuti, Ani; Fukahori, Masaru; Kawasaki, Shizuka; Eguchi, Yumi; Misu, Hideyuki; Odani, Hiromitsu; Zhou, Songying; Narisawa, Kazuhiko; Fujiwara, Kazuki; Shinohara, Makoto; Sato, Tatsuo

    2014-08-01

    Recent reports indicate that organic fertilisers have a suppressive effect on the pathogens of plants grown under hydroponic systems. Furthermore, microorganisms exhibiting antagonistic activity to diseases have been observed in organic hydroponic systems. This study evaluated the effect of corn steep liquor (CSL) on controlling lettuce root rot disease [Fusarium oxysporum f.sp. lactucae (FOL)] in a hydroponic system. The effect of CSL and Otsuka A (a chemical fertiliser) on the inhibition of FOL in terms of mycelial growth inhibition was tested in vivo. Addition of CSL suppressed FOL infection rates. CSL inhibited FOL infection by 26.3-42.5% from 2 days after starting incubation. In comparison, Otsuka A inhibited FOL growth by 5.5-19.4%. In addition, four of 10 bacteria isolated from the nutrient media containing CSL exhibited inhibition zones preventing FOL mycelial growth. We found that CSL suppressed FOL in lettuce via its antifungal and biostimulatory effects. We suggest that activation of beneficial microorganisms present in CSL may be used to decrease lettuce root rot disease and contribute to lettuce root growth. © 2014 Society of Chemical Industry.

  15. Assessing the full effects of public investment in space

    NARCIS (Netherlands)

    Clark, J.; Koopmans, C.C.; Hof, B.; Knee, P.; Lieshout, R.; Simmonds, P.; Wokke, F.

    2014-01-01

    Many space-related impact studies have been carried out in the past, but there is no conclusive, comprehensive evaluation of the economic and social effects of public investments in space. Such evaluations are not easy to perform, for several reasons: the space sector is not a recognised category in

  16. Full k-space visualization of photoelectron diffraction

    International Nuclear Information System (INIS)

    Denlinger, J.D.; Rotenberg, E.; Kevan, S.D.; Tonner, B.P.

    1997-01-01

    The development of photoelectron holography has promoted the need for larger photoelectron diffraction data sets in order to improve the quality of real-space reconstructed images (by suppressing transformational artifacts and distortions). The two main experimental and theoretical approaches to holography, the transform of angular distribution patterns for a coarse selection of energies or the transform of energy-scanned profiles for several directions, represent two limits to k-space sampling. The high brightness of third-generation soft x-ray synchrotron sources provides the opportunity to rapidly measure large high-density x-ray photoelectron diffraction (XPD) data sets with approximately uniform k-space sampling. In this abstract, the authors present such a photoelectron data set acquired for Cu 3p emission from Cu(001). Cu(001) is one of the most well-studied systems for understanding photoelectron diffraction structure and for testing photoelectron holography methods. Cu(001) was chosen for this study in part due to the relatively inert and unreconstructed clean surface, and it served to calibrate and fine-tune the operation of a new synchrotron beamline, electron spectrometer and sample goniometer. In addition to Cu, similar open-quotes volumeclose quotes XPD data sets have been acquired for bulk and surface core-level emission from W(110), from reconstructed Si(100) and Si(111) surfaces, and from the adsorbate system of c(2x2) Mn/Ni(100)

  17. Suppression of wheat TaCDK8/TaWIN1 interaction negatively affects germination of Blumeria graminis f.sp. tritici by interfering with very-long-chain aldehyde biosynthesis.

    Science.gov (United States)

    Kong, Lingyao; Chang, Cheng

    2018-01-01

    Wheat TaCDK8 interacts with TaWIN1 to regulate very-long-chain aldehyde biosynthesis required for efficient germination of Blumeria graminis f.sp. tritici. Powdery mildew caused by Blumeria graminis f.sp. tritici (Bgt) is a devastating disease of common wheat (Triticum aestivum L.). Bgt infection initiates with its conidia germination on the aerial surface of wheat. In this study, we isolated the cyclin-dependent kinase 8 (TaCDK8) from wheat cultivar Jing411 and found that silencing of TaCDK8 impeded Bgt germination. The biochemical and molecular-biological assays revealed that TaCDK8 interacts with and phosphorylates the wheat transcription factor wax inducer 1 (TaWIN1) to stimulate the TaWIN1-dependent transcription. Bgt conidia on the leaves of TaWIN1-silenced plants also showed reduced germination. Gas chromatographic analysis revealed that knockdown of TaCDK8 or TaWIN1 resulted in decreases of wax components and cutin monomers in wheat leaves. Moreover, Bgt germination on leaves of TaCDK8 or TaWIN1 silenced plants could be fully restored by application of wild-type cuticular wax. In vitro studies demonstrated that very-long-chain aldehydes absent from the cuticular wax of the TaCDK8 or TaWIN1 silenced plants were capable of chemically stimulating Bgt germination. These results implicated that the suppression of TaCDK8/TaWIN1 interaction negatively affects Bgt germination by interfering with very-long-chain aldehyde biosynthesis required for efficient fungal germination.

  18. New Geographical Insights of the Latest Expansion of Fusarium oxysporum f.sp. cubense Tropical Race 4 Into the Greater Mekong Subregion

    Directory of Open Access Journals (Sweden)

    Si-Jun Zheng

    2018-04-01

    Full Text Available Banana is the most popular and most exported fruit and also a major food crop for millions of people around the world. Despite its importance and the presence of serious disease threats, research into this crop is limited. One of those is Panama disease or Fusarium wilt. In the previous century Fusarium wilt wiped out the “Gros Michel” based banana industry in Central America. The epidemic was eventually quenched by planting “Cavendish” bananas. However, 50 years ago the disease recurred, but now on “Cavendish” bananas. Since then the disease has spread across South-East Asia, to the Middle-East and the Indian subcontinent and leaped into Africa. Here, we report the presence of Fusarium oxysporum f.sp. cubense Tropical Race 4 (Foc TR4 in “Cavendish” plantations in Laos, Myanmar, and Vietnam. A combination of classical morphology, DNA sequencing, and phenotyping assays revealed a very close relationship between the Foc TR4 strains in the entire Greater Mekong Subregion (GMS, which is increasingly prone to intensive banana production. Analyses of single-nucleotide polymorphisms enabled us to initiate a phylogeography of Foc TR4 across three geographical areas—GMS, Indian subcontinent, and the Middle East revealing three distinct Foc TR4 sub-lineages. Collectively, our data place these new incursions in a broader agroecological context and underscore the need for awareness campaigns and the implementation of validated quarantine measures to prevent further international dissemination of Foc TR4.

  19. Performance of a neutron transport code with full phase space decomposition on the Cray Research T3D

    International Nuclear Information System (INIS)

    Dorr, M.R.; Salo, E.M.

    1995-01-01

    We present performance results obtained on a 128-node Cray Research T3D computer by a neutron transport code implementing a standard mtiltigroup, discrete ordinates algorithm on a three-dimensional Cartesian grid. After summarizing the implementation strategy used to obtain a full decomposition of phase space (i.e., simultaneous parallelization of the neutron energy, directional and spatial variables), we investigate the scalability of the fundamental source iteration step with respect to each phase space variable. We also describe enhancements that have enabled performance rates approaching 10 gigaflops on the full 128-node machine

  20. Development of empirical relationships for prediction of mechanical and wear properties of AA6082 aluminum matrix composites produced using friction stir processing

    Directory of Open Access Journals (Sweden)

    I. Dinaharan

    2016-09-01

    Full Text Available Friction Stir Processing (FSP has been established as a potential solid state production method to prepare aluminum matrix composites (AMCs. FSP was effectively applied to produce AA6082 AMCs reinforced with various ceramic particles such as SiC, Al2O3, TiC, B4C and WC in this work. Empirical relationships were estimated to predict the influence of FSP process parameters on the properties such as area of stir zone, microhardness and wear rate of AMCs. FSP experiments were executed using a central composite rotatable design consisting of four factors and five levels. The FSP parameters analyzed were tool rotational speed, traverse speed, groove width and type of ceramic particle. The effect of those parameters on the properties of AMCs was deduced using the developed empirical relationships. The predicted trends were explained with the aid of observed macro and microstructures.

  1. Revisión: spongospora subterranea f.sp. subterranea y su virus asociado potato mop-top virus (pmtv), dos patógenos reemergentes en los cultivos de papa de colombia

    OpenAIRE

    Osorio Giraldo, Inés; Gutiérrez, Pablo Andrés; Marín Montoya, Mauricio

    2012-01-01

    Resumen. El cultivo de papa es uno de los renglones agrícolas de mayor importancia en Colombia; se extiende a 128.701 ha y genera una producción anual de 2,3 millones de t año-1. Desde el punto vista fitosanitario, la papa se ve afectada por diversos problemas, destacándose en los últimos años la reemergencia de la sarna polvosa causada por el protozoario del suelo Spongospora subterranea f.sp. subterranea (Sss). El efecto de esta enfermedad se refleja en el deterioro de la calidad del tubérc...

  2. AMELIORATIVE EFFECT OF GAMMA RADIATION ON SODIUM CHLORIDE STRESSED TOMATO PLANT GROWTH IN SOIL INFESTED WITH FUSARIUM OXYSPORUM F.SP. LYCOPERSICI

    International Nuclear Information System (INIS)

    RIZK, M.A.; BOTROS, H.W.

    2009-01-01

    The present study was carried out to investigate the influence of saline stress and/or gamma radiation on the tomato seedlings development, mycelial growth and sporulation of Fusarium oxysporum. Irradiation of the fungus ameliorated the detrimental effect of salinity and improved the percentage of seedlings emergence and increased the root and shoot lengths and dry weight of tomato seedlings. Also, coupling salinity with irradiation significantly increased the mycelial growth in soil and biomass gain of Fusarium oxysporum up to 2 kGy, above which the growth and sporulation were hardly affected and completely suppressed at 5 kGy. On the other hand, exposure of the tomato seeds up to 4 Gy counteracted the suppressive effect of salinity and increased the growth parameters in presence or absence of the fungus. Fusarium oxysporum f.sp. lycopersici appeared to be tolerant to salinity up to 4.8 EC (millimohse) and highly sensitive to irradiation dose 5 kGy.

  3. Physical and functional characteristics of extrudates prepared from fenugreek and oats

    Directory of Open Access Journals (Sweden)

    Sajad Ahmad Wani

    2016-12-01

    Full Text Available This study was conducted to investigate the effect of fenugreek seed powder (FSP and oat flour (OF on the physical and functional properties of extruded snack product such as bulk density (BD, hardness (HD, lateral expansion (LE, water absorption index (WAI and water solubility index (WSI using response surface methodology. All the properties were found to be significantly (p < 0.05 affected by proportion of FSP and OF. Results indicated that with the increase in the FSP content, an increase in the values of BD, HD, WAI and WSI was noticed, whereas negative effect of FSP on LE was observed. Results showed negative effect of OF on HD and WSI and an increased effect on BD, LE and WAI of the extruded product. Numerical optimization results showed that a mixture of 2% FSP and 6% OF had higher preference levels for parameters of physical and functional characteristics and could be extruded to produce acceptable quality extrudates.

  4. Friction Stir Processing of Cast Superalloys, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — This SBIR effort examines the feasibility of an innovative fabrication technology incorporating sand casting and friction stir processing (FSP) for producing...

  5. Microstructure of Multi-Pass Friction-Stir-Processed Al-Zn-Mg-Cu Alloys Reinforced by Nano-Sized TiB2 Particles and the Effect of T6 Heat Treatment

    Directory of Open Access Journals (Sweden)

    Xiaofei Ju

    2017-11-01

    Full Text Available In this work, a fine-grained structure with a uniform distribution of TiB2 particles and precipitates was achieved in TiB2 particle-reinforced (PR Al-Zn-Mg-Cu alloys by friction stir processing (FSP. The effects of multi-pass FSP on the microstructure, and TiB2 particle distribution, as well as the microstructural evolution in the following T6 treatment, were investigated by X-ray diffraction, scanning electron microscopy and associated electron backscattered diffraction. The results showed that the distribution of TiB2 particles and alloy precipitates was further improved with an increase in the FSP passes. Moreover, compared with alloy segregation in the as-cast PR alloys during T6 treatment, a complete solution of the precipitates was achieved in the FSP-treated PR alloys. The fine-grained structure of the FSP-treated PR alloys was thermally stable without any abnormal growth at the high temperature of T6 treatment due to the pinning effect of dispersed TiB2 particles. The strength and ductility of the PR alloys were simultaneously improved by the combination of FSP and T6 treatment.

  6. Friction Stir Processing of Cast Superalloys, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — This SBIR Phase I effort examines the feasibility of an innovative fabrication technology incorporating sand casting and friction stir processing (FSP) for producing...

  7. A Novel Modular-Stator Outer-Rotor Flux-Switching Permanent-Magnet Motor

    OpenAIRE

    Jing Zhao; Yun Zheng; Congcong Zhu; Xiangdong Liu; Bin Li

    2017-01-01

    A novel modular-stator outer-rotor flux-switching permanent-magnet (MSOR-FSPM) motor is proposed and studied in this paper. Structure, operation and design principles of the MSOR-FSPM motor are introduced and analyzed. Considering that the combination of different pole number and slot number has a great influence on the motor performance, the optimum rotor pole number for the 12-stator-slot MSOR-FSPM motor is researched to obtain good performance and make full use of the space in the MSOR-FSP...

  8. Determinación in vitro de los patrones de inducción de una endo-xilanasa (E.C.3.2.1.8 secretada por Fusarium oxysporum f.sp. dianthi. Purificación y caracterización parcial

    Directory of Open Access Journals (Sweden)

    Sixta Tulia Martinez

    2014-04-01

    Full Text Available Al hacer un ensayo in vitro, la enzimaxilanasa secretada por el patógeno Fusariumoxysporum f.sp. dianthi se induceen presencia de pared celular de tallo yraíz de clavel de variedades tolerantesy resistentes. Se observa un comportamientodiferencial según el órgano y lavariedad, que demuestra la influencia,en la inducción, de las características delhospedero.La enzima se purifica parcialmenteutilizando cromatografías de intercambiocatiónico, aniónico y tamiz molecular. Lacaracterización bioquímica presenta lossiguientes valores: masa molecular 38,8kDa, temperatura y pH óptimo 35 0Cy 10, respectivamente, Kmap = 0,2 mg/mL, Vmaxap = 500 U/mg.La presencia de oligogalacturónidoscomo productos de hidrólisis detectadoscon una cromatografía en capa delgadapermite clasificar la enzima como unaendoxilanasa.La enzima retiene el 50 % de su estabilidada pH muy alcalino, y presentaalta termoestabilidad en un intervalo detemperatura entre 30 y 80 0C.

  9. A Two-Phase Cooling Loop for Fission Surface Power Waste Heat Transport, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Current lunar-based Fission Surface Power (FSP) Systems that will support sustained surface outposts consist of a nuclear reactor with power converters, whose waste...

  10. Reflection and transmission of full-vector X-waves normally incident on dielectric half spaces

    KAUST Repository

    Salem, Mohamed

    2011-08-01

    The reflection and transmission of full-vector X-Waves incident normally on a planar interface between two lossless dielectric half-spaces are investigated. Full-vector X-Waves are obtained by superimposing transverse electric and magnetic polarization components, which are derived from the scalar X-Wave solution. The analysis of transmission and reflection is carried out via a straightforward but yet effective method: First, the X-Wave is decomposed into vector Bessel beams via the Bessel-Fourier transform. Then, the reflection and transmission coefficients of the beams are obtained in the spectral domain. Finally, the transmitted and reflected X-Waves are obtained via the inverse Bessel-Fourier transform carried out on the X-wave spectrum weighted with the corresponding coefficient. © 2011 IEEE.

  11. Revisión: Spongospora subterranea f.sp. subterranea y su Virus Asociado Potato mop-top virus (PMTV, Dos Patógenos Reemergentes en los Cultivos de Papa de Colombia Review: Spongospora subterranea f.sp. subterranea and its Associated Virus Potato mop-top virus (PMTV, Two Re-emerging Pathogens of Potato Crops in Colombia

    Directory of Open Access Journals (Sweden)

    Inés Osorio Giraldo

    2012-06-01

    Full Text Available Resumen. El cultivo de papa es uno de los renglones agrícolas de mayor importancia en Colombia; se extiende a 128.701 ha y genera una producción anual de 2,3 millones de t año-1. Desde el punto vista fitosanitario, la papa se ve afectada por diversos problemas, destacándose en los últimos años la reemergencia de la sarna polvosa causada por el protozoario del suelo Spongospora subterranea f.sp. subterranea (Sss. El efecto de esta enfermedad se refleja en el deterioro de la calidad del tubérculo y en la reducción de la producción, al afectar el sistema radicular y los tubérculos. Además, Sss es el vector natural del Potato mop-top virus (PMTV, uno de los virus prevalentes en la región Andina y que presenta carácter cuarentenario en diferentes países del mundo. En esta revisión se presenta el estado de conocimiento que se tiene en el mundo sobre éstos dos fitopatógenos, haciendo énfasis en los principales hallazgos que se han realizado en Colombia sobre sus niveles de variación genética, efecto sobre la producción y métodos de detección. Se espera que la información presentada, llame la atención a los organismos estatales de sanidad vegetal, gremios de productores, asistentes técnicos y agricultores, sobre la importancia creciente que presentan dichos patógenos en los sistemas de producción de papa. Además, que sirva de base para el diseño de herramientas de diagnóstico que apoyen los esquemas de certificación de tubérculo semilla y los programas de mejoramiento genético de papa que se adelantan en Colombia.Abstract. Potato is one of the most important crops in Colombia, comprising 128.701 ha and a total production of 2.3 million t year-1. There are several phytopathological problems affecting this crop, however, the soil protozoan Spongospora subterranea f.sp. subterranea (Sss, the causal agent of powdery scab, stands out due to its recent reemergence. Powdery scab can seriously deteriorate tuber quality and

  12. 2D full-wave simulation of waves in space and tokamak plasmas

    Directory of Open Access Journals (Sweden)

    Kim Eun-Hwa

    2017-01-01

    Full Text Available Simulation results using a 2D full-wave code (FW2D for space and NSTX fusion plasmas are presented. The FW2D code solves the cold plasma wave equations using the finite element method. The wave code has been successfully applied to describe low frequency waves in planetary magnetospheres (i.e., dipole geometry and the results include generation and propagation of externally driven ultra-low frequency waves via mode conversion at Mercury and mode coupling, refraction and reflection of internally driven field-aligned propagating left-handed electromagnetic ion cyclotron (EMIC waves at Earth. In this paper, global structure of linearly polarized EMIC waves is examined and the result shows such resonant wave modes can be localized near the equatorial plane. We also adopt the FW2D code to tokamak geometry and examine radio frequency (RF waves in the scape-off layer (SOL of tokamaks. By adopting the rectangular and limiter boundary, we compare the results with existing AORSA simulations. The FW2D code results for the high harmonic fast wave heating case on NSTX with a rectangular vessel boundary shows excellent agreement with the AORSA code.

  13. U.S. Geological Survey Fundamental Science Practices

    Science.gov (United States)

    ,

    2011-01-01

    overall program for our science. In January 2009, the USGS moved to full implementation of FSP. The FSP Advisory Committee (FSPAC) was formed to serve as the Bureau's working and standing committee to ensure the objectivity and quality of the Bureau's science information products and to provide support for the full implementation of FSP.

  14. Selection and differentiation of Bacillus spp. Antagonistic to Fusarium oxysporum f.sp. lycopersici and Alternaria solani infecting Tomato.

    Science.gov (United States)

    Shanmugam, Veerubommu; Atri, Kamini; Gupta, Samriti; Kanoujia, Nandina; Naruka, Digvijay Singh

    2011-03-01

    Antagonistic Bacillus spp. displaying in vitro production of siderophore, chitinase, and β-1,3-glucanase were identified from dual culture assays. In independent greenhouse studies, seed bacterization and soil application of Bacillus atrophaeus S2BC-2 challenge inoculated with Fusarium oxysporum f.sp. lycopersici (FOL) and Alternaria solani (AS) recorded low percent disease index of 25.3 and 28.7, respectively, over nonbacterised pathogen control (44.3 and 56.4). The low disease incidence corroborated with tomato growth promotion with high vigor index (8,041.2) and fresh plant weight (82.5 g) on challenge inoculation with FOL. Analysis of root and leaf samples in rhizobacterial treatment challenged with FOL and AS revealed maximum induction of chitinase (1.9 and 1.7 U/mg of protein, respectively) and β-1,3-glucanase (23.5 and 19.2 U/mg of protein, respectively). In native gel activity assays, the rhizobacterial treatment on challenge inoculation strongly expressed three high intensity PO isoforms along with one low intensity isoform. In studies on genetic diversity of the Bacillus strains by repetitive extragenomic palindromic-polymerase chain reaction (REP-PCR) and amplified rDNA restriction analysis (ARDRA) patterns, ARDRA was more highly discriminant than REP-PCR and allowed grouping of the strains and differentiation of the antagonistic strains from other isolates.

  15. Proteome-wide Adaptations of Mouse Skeletal Muscles during a Full Month in Space.

    Science.gov (United States)

    Tascher, Georg; Brioche, Thomas; Maes, Pauline; Chopard, Angèle; O'Gorman, Donal; Gauquelin-Koch, Guillemette; Blanc, Stéphane; Bertile, Fabrice

    2017-07-07

    The safety of space flight is challenged by a severe loss of skeletal muscle mass, strength, and endurance that may compromise the health and performance of astronauts. The molecular mechanisms underpinning muscle atrophy and decreased performance have been studied mostly after short duration flights and are still not fully elucidated. By deciphering the muscle proteome changes elicited in mice after a full month aboard the BION-M1 biosatellite, we observed that the antigravity soleus incurred the greatest changes compared with locomotor muscles. Proteomics data notably suggested mitochondrial dysfunction, metabolic and fiber type switching toward glycolytic type II fibers, structural alterations, and calcium signaling-related defects to be the main causes for decreased muscle performance in flown mice. Alterations of the protein balance, mTOR pathway, myogenesis, and apoptosis were expected to contribute to muscle atrophy. Moreover, several signs reflecting alteration of telomere maintenance, oxidative stress, and insulin resistance were found as possible additional deleterious effects. Finally, 8 days of recovery post flight were not sufficient to restore completely flight-induced changes. Thus in-depth proteomics analysis unraveled the complex and multifactorial remodeling of skeletal muscle structure and function during long-term space flight, which should help define combined sets of countermeasures before, during, and after the flight.

  16. Fabrication of Surface Level Cu/SiCp Nanocomposites by Friction Stir Processing Route

    Directory of Open Access Journals (Sweden)

    Cartigueyen Srinivasan

    2015-01-01

    Full Text Available Friction stir processing (FSP technique has been successfully employed as low energy consumption route to prepare copper based surface level nanocomposites reinforced with nanosized silicon carbide particles (SiCp. The effect of FSP parameters such as tool rotational speed, processing speed, and tool tilt angle on microstructure and microhardness was investigated. Single pass FSP was performed based on Box-Behnken design at three factors in three levels. A cluster of blind holes 2 mm in diameter and 3 mm in depth was used as particulate deposition technique in order to reduce the agglomeration problem during composite fabrication. K-type thermocouples were used to measure temperature histories during FSP. The results suggest that the heat generation during FSP plays a significant role in deciding the microstructure and microhardness of the surface composites. Microstructural observations revealed a uniform dispersion of nanosized SiCp without any agglomeration problem and well bonded with copper matrix at different process parameter combinations. X-ray diffraction study shows that no intermetallic compound was produced after processing. The microhardness of nanocomposites was remarkably enhanced and about 95% more than that of copper matrix.

  17. Fish sarcoplasmic proteins as a high value marine material for wound dressing applications.

    Science.gov (United States)

    Vieira, Sara; Franco, Albina R; Fernandes, Emanuel M; Amorim, Sara; Ferreira, Helena; Pires, Ricardo A; Reis, Rui L; Martins, Albino; Neves, Nuno M

    2018-07-01

    Fish sarcoplasmic proteins (FSP) constitute around 25-30% of the total fish muscle protein. As the FSP are water soluble, FSP were isolated from fresh cod (Gadus morhua) by centrifugation. By SDS-PAGE, it was possible to determine the composition of FSP extracts (FSP-E). The FSP-E undergo denaturation at 44.12 ± 2.34° C, as characterized by differential scanning calorimetry thermograms (DSC). The secondary structure of FSP-E is mainly composed by α-helix structure, as determined by circular dichroism. The cytocompatibility of FSP-E, at concentrations ranging from 5 to 20 mg/mL, was investigated. Concentrations lower than 10 mg/mL have no cytotoxicity cultures of fibroblasts over 72 h. Further on, FSP membranes (FSP-M) were produced by spin coating to evaluate its properties. FSP-M shown having uniform surface as analyzed by Scanning Electron Microscopy (SEM). The relative amount of α-helix structures is higher when compared with the FSP-E. The FSP-M have higher temperature stability than the FSP-E, since they presented a denaturation temperature of 58.88 ± 3.36° C, according to the DSC analysis. FSP-M shown distinctive mechanical properties, with a stiffness of 16.57 ± 3.95 MPa and a yield strength of 23.85 ± 5.97 MPa. Human lung fibroblasts cell lines (MRC-5) were cultured in direct contact with FSP-M, demonstrating its cytocompatibility for 48 h. Based on these results, FSP can be considered a potential biomaterial recovered from nature, for wound dressing applications. Copyright © 2018 Elsevier B.V. All rights reserved.

  18. Determinación del antagonismo del aislamiento T 95 de Trichoderma harzianum sobre Fusarium oxysporum f.sp. cucumerinum en plantas de pepino cohombro

    Directory of Open Access Journals (Sweden)

    Borda Fernando

    1993-06-01

    Full Text Available Una de las enfermedades de mayor importancia económica en el cultivo de clavel en Colombia es la ocasionada por el hongo Fusarium oxysporumf.sp. dianthi. Las altas pérdidas directas que ocasiona el patógeno una vez establecido en cultivos comerciales, la facilidad de propagación através de esquejes infectados, la fácil diseminación del patógeno a
    través de diferentes formas, la alta persistencia del
    patógeno en el suelo y el alto costo y regular eficiencia
    de las medidas de control utilizadas, dan a esta
    enfermedad una gran importancia patológica y económica
    (Arbeláez, 1987. Para el control del marchitamiento vascular del clavel, se realizan prácticas, tales como tratamiento
    del suelo con vapor deagua, con diversos fumigantes y con fungicidas sistémicos, pero el costo de dichas prácticas puede variar actualmente entre $500.000 y $10.000.000, lo cual depende del tipo de tratamiento (Baker, 1980; Arbeláez, 1989. Las dificultades encontradas en el manejo de las
    poblaciones de Fusarium oxysporum f.sp. dianthi en el suelo por métodos convencionales, hacen que el control biológico sea uno de los métodos más promisorios para el control de la enfermedad; además el control biológico puede combinarse con otros métodos de control y asl, se logra una mayor
    eficiencia (Scher y Baker, 1980.

  19. Uji Daya Hambat Jamur Endofit dan Eksofit dalam Menekan Pertumbuhan Fusarium oxysporum f.sp. vanillae Penyebab Busuk Batang Panili Secara In Vitro

    Directory of Open Access Journals (Sweden)

    NI WAYAN SUNITI

    2016-11-01

    Full Text Available Study on In Vitro Inhibitory Ability of Endophytic and Exophytic Fungusin Suppressing the Growth of Fusarium oxysporum f.sp. vanillae thatCauses Stem Rot of Vanilla. Vanilla stem rot disease caused by Fusarium oxysporumf.sp. vanillae , is still a very dangerous disease and feared by vanilla farmers. Disease until thepresent time there does not yet appear adequate control strategies for the disease. On the basisof these problems interested studied the use of endophytic fungi and exophytic existing on theleaves and stems of healthy plants , which have potential as a biological agent to controlpathogens . The study was conducted in three stages: (1 isolation of the pathogen and fungalendophyte and exophytic, (2 identification of pathogenic microscopic morphology, fungalendophyte and exophytic, and (3 test the inhibition of fungal endophyte and exophyticagainst pathogens. Fungi are found as the leaves are Aspergillus niger and Rhizopus spp., Onexophytic on the trunk is Trichoderma sp . and Fusarium spp., as a leaf endophytic found A.niger and Neurospora spp. and as endophytic rod is Neurospora spp . The highest prevalenceachieved by Neurospora spp . which is equal to 100 % on endophyte stem, while Rhizopusspp., and Fusarium spp. by 90 % respectively, exophytic on the leaves and stems. The testresults found that the inhibition of leaf eksofit Rhisopus spp . give up inhibition ranged from70.37±3.2% - 100% , while A. niger amounted to 72.22% . In exophytic on rod found onlyTrichoderma sp. inhibit pathogens by 73.70±3.57%. In endophytic on leaf found A. niger at70.37±3.2% , while Neorospora spp. ranging from 79.11±3.21% - 88.50±2.10%. In theendophytic on trunk was found Neurosporas spp. amounting to 70.74±3.57% - 79.26±1.28%.

  20. Fabrication and characterization of functionally graded Al–SiC nanocomposite by using a novel multistep friction stir processing

    International Nuclear Information System (INIS)

    Salehi, Mojtaba; Farnoush, Hamidreza; Mohandesi, Jamshid Aghazadeh

    2014-01-01

    Highlights: • A novel multistep FSP to fabricate functionally-graded bulk nanocomposites. • The composition of FG sample was changed from 18 to 0 wt% SiC along five layers. • The 3.2 times higher hardness than the base metal in FG sample along the thickness. • The 15% enhancement in hardness of FG sample with respect to homogenous sample. • Microhardness and inverse of interparticle spacing was correlated linearly. - Abstract: Functionally graded materials are one of the most promising candidates among advanced materials. However, some challenges still exist in its fabrication methods. The current study aims to produce functionally-graded bulk Al–SiC nanocomposites by a novel multistep friction stir processing (FSP) for the first time. The SiC nanoparticles were packed into a groove on the 6061 aluminum plate and FSP was performed by using a tool with pin length of 6 mm. Subsequently, FSP was reapplied on another groove by using a tool with a shorter pin length of 3.2 mm. The desirable distribution of SiC nanoparticles in the matrix was confirmed by scanning electron and atomic force microscopes. The composition of graded sample was changed continuously from 18 to 0 wt% SiC along the thickness. Accordingly, the microhardness profile showed a maximum of 160 Hv in the enriched zone which is 3.2 times higher than the hardness of the particle-depleted zone. However, a constant hardness value of 135 Hv was obtained along the thickness of homogenous sample which is 15% lower than that of superficial layer in graded sample. Moreover, the hardness values were linearly correlated with the inverse of interparticle spacing

  1. Enhancing Corrosion and Wear Resistance of AA6061 by Friction Stir Processing with Fe78Si9B13 Glass Particles

    Directory of Open Access Journals (Sweden)

    Lingyu Guo

    2015-08-01

    Full Text Available The AA6061-T6 aluminum alloy samples including annealed Fe78Si9B13 particles were prepared by friction stir processing (FSP and investigated by various techniques. The Fe78Si9B13-reinforced particles are uniformly dispersed in the aluminum alloy matrix. The XRD results indicated that the lattice parameter of α-Al increases and the preferred orientation factors F of (200 plane of α-Al reduces after friction stir processing. The coefficient of thermal expansion (CTE for FSP samples increases at first with the temperature but then decreases as the temperature further increased, which can be explained by the dissolving of Mg and Si from β phase and Fe78Si9B13 particles. The corrosion and wear resistance of FSP samples have been improved compared with that of base metal, which can be attributed to the reduction of grain size and the CTE mismatch between the base metal and reinforced particles by FSP, and the lubrication effect of Fe78Si9B13 particles also plays a role in improving wear resistance. In particular, the FSP sample with reinforced particles in amorphous state exhibited superior corrosion and wear resistance due to the unique metastable structure.

  2. The fusion protein signal-peptide-coding region of canine distemper virus: a useful tool for phylogenetic reconstruction and lineage identification.

    Directory of Open Access Journals (Sweden)

    Nicolás Sarute

    Full Text Available Canine distemper virus (CDV; Paramyxoviridae, Morbillivirus is the etiologic agent of a multisystemic infectious disease affecting all terrestrial carnivore families with high incidence and mortality in domestic dogs. Sequence analysis of the hemagglutinin (H gene has been widely employed to characterize field strains, permitting the identification of nine CDV lineages worldwide. Recently, it has been established that the sequences of the fusion protein signal-peptide (Fsp coding region are extremely variable, suggesting that analysis of its sequence might be useful for strain characterization studies. However, the divergence of Fsp sequences among worldwide strains and its phylogenetic resolution has not yet been evaluated. We constructed datasets containing the Fsp-coding region and H gene sequences of the same strains belonging to eight CDV lineages. Both datasets were used to evaluate their phylogenetic resolution. The phylogenetic analysis revealed that both datasets clustered the same strains into eight different branches, corresponding to CDV lineages. The inter-lineage amino acid divergence was fourfold greater for the Fsp peptide than for the H protein. The likelihood mapping revealed that both datasets display strong phylogenetic signals in the region of well-resolved topologies. These features indicate that Fsp-coding region sequence analysis is suitable for evolutionary studies as it allows for straightforward identification of CDV lineages.

  3. Electrochemical properties in a seawater environment of 5456-H116 aluminum alloy subjected to optimal friction stir processing

    International Nuclear Information System (INIS)

    Park, Jae-Cheul; Kim, Seong-Jong

    2010-01-01

    The mechanical properties of aluminum alloy may be enhanced by modifying the microstructure of the metal by friction stir processing (FSP). Previous studies have demonstrated that the mechanical characteristics of 5456-H116 Al alloy subjected to FSP, at 250 rpm and 15 mm min -1 using a full screw probe, are similar to those of the original alloy. In the present work, the same alloy was processed under these optimal conditions, and the range of favorable protection potentials with regard to hydrogen embrittlement and stress corrosion cracking was determined to lie between -1.3 and -0.7 V (versus Ag/AgCl). The electrochemical behavior of the specimens subjected to FSP was superior to that of the original 5456-H116 Al alloy.

  4. Electrochemical properties in a seawater environment of 5456-H116 aluminum alloy subjected to optimal friction stir processing

    Science.gov (United States)

    Park, Jae-Cheul; Kim, Seong-Jong

    2010-05-01

    The mechanical properties of aluminum alloy may be enhanced by modifying the microstructure of the metal by friction stir processing (FSP). Previous studies have demonstrated that the mechanical characteristics of 5456-H116 Al alloy subjected to FSP, at 250 rpm and 15 mm min-1 using a full screw probe, are similar to those of the original alloy. In the present work, the same alloy was processed under these optimal conditions, and the range of favorable protection potentials with regard to hydrogen embrittlement and stress corrosion cracking was determined to lie between -1.3 and -0.7 V (versus Ag/AgCl). The electrochemical behavior of the specimens subjected to FSP was superior to that of the original 5456-H116 Al alloy.

  5. Real-space multiple-scattering theory and the electronic structure of systems with full or reduced symmetry

    International Nuclear Information System (INIS)

    Zhang, X.; Gonis, A.; MacLaren, J.M.

    1989-01-01

    We present a new real-space multiple-scattering-theory method for the solution of the Schroedinger equation and the calculation of the electronic structure of solid materials with full or reduced symmetry. The method is based on the concept of semi-infinite periodicity (SIP), rather than translational invariance, and on the property of removal invariance of the scattering matrix of systems with SIP. This latter property allows one to replace the usual Brillouin-zone integrals in reciprocal space by a self-consistency equation for the t matrix, which is sufficient for the determination of the Green function and related properties. Because it is developed entirely in direct space, the method provides a unified treatment of the electronic structure of bulk materials, surfaces, interfaces and grain boundaries (coherent or incoherent), impurities of interstitial or substitutional kinds, and can be easily extended to treat concentrated, substitutionally disordered alloys. One of its advantages over methods based on Bloch's theorem and reciprocal space is the great simplicity of setting up and running the associated computer codes even for complex structures, and structures with reduced or no symmetry that lie outside the realm of applicability of conventional methods. We present the results of model calculations for one-dimensional and three-dimensional model systems as well as for three-dimensional realistic materials. Where appropriate, these results are compared with those obtained through conventional techniques, and give an indication of the method's flexibility and reliability. Our applications of this method to this point are discussed, and our plans for future development are presented

  6. International Space Station Medical Projects - Full Services to Mars

    Science.gov (United States)

    Pietrzyk, R. A.; Primeaux, L. L.; Wood, S. J.; Vessay, W. B.; Platts, S. H.

    2018-01-01

    The International Space Station Medical Projects (ISSMP) Element provides planning, integration, and implementation services for HRP research studies for both spaceflight and flight analog research. Through the implementation of these two efforts, ISSMP offers an innovative way of guiding research decisions to meet the unique challenges of understanding the human risks to space exploration. Flight services provided by ISSMP include leading informed consent briefings, developing and validating in-flight crew procedures, providing ISS crew and ground-controller training, real-time experiment monitoring, on-orbit experiment and hardware operations and facilitating data transfer to investigators. For analog studies at the NASA Human Exploration Research Analog (HERA), the ISSMP team provides subject recruitment and screening, science requirements integration, data collection schedules, data sharing agreements, mission scenarios and facilities to support investigators. The ISSMP also serves as the HRP interface to external analog providers including the :envihab bed rest facility (Cologne, Germany), NEK isolation chamber (Moscow, Russia) and the Antarctica research stations. Investigators working in either spaceflight or analog environments requires a coordinated effort between NASA and the investigators. The interdisciplinary nature of both flight and analog research requires investigators to be aware of concurrent research studies and take into account potential confounding factors that may impact their research objectives. Investigators must define clear research requirements, participate in Investigator Working Group meetings, obtain human use approvals, and provide study-specific training, sample and data collection and procedures all while adhering to schedule deadlines. These science requirements define the technical, functional and performance operations to meet the research objectives. The ISSMP maintains an expert team of professionals with the knowledge and

  7. Full-potential multiple scattering theory with space-filling cells for bound and continuum states.

    Science.gov (United States)

    Hatada, Keisuke; Hayakawa, Kuniko; Benfatto, Maurizio; Natoli, Calogero R

    2010-05-12

    We present a rigorous derivation of a real-space full-potential multiple scattering theory (FP-MST) that is free from the drawbacks that up to now have impaired its development (in particular the need to expand cell shape functions in spherical harmonics and rectangular matrices), valid both for continuum and bound states, under conditions for space partitioning that are not excessively restrictive and easily implemented. In this connection we give a new scheme to generate local basis functions for the truncated potential cells that is simple, fast, efficient, valid for any shape of the cell and reduces to the minimum the number of spherical harmonics in the expansion of the scattering wavefunction. The method also avoids the need for saturating 'internal sums' due to the re-expansion of the spherical Hankel functions around another point in space (usually another cell center). Thus this approach provides a straightforward extension of MST in the muffin-tin (MT) approximation, with only one truncation parameter given by the classical relation l(max) = kR(b), where k is the electron wavevector (either in the excited or ground state of the system under consideration) and R(b) is the radius of the bounding sphere of the scattering cell. Moreover, the scattering path operator of the theory can be found in terms of an absolutely convergent procedure in the l(max) --> ∞ limit. Consequently, this feature provides a firm ground for the use of FP-MST as a viable method for electronic structure calculations and makes possible the computation of x-ray spectroscopies, notably photo-electron diffraction, absorption and anomalous scattering among others, with the ease and versatility of the corresponding MT theory. Some numerical applications of the theory are presented, both for continuum and bound states.

  8. Development of quartz particulate reinforced AA6063 aluminum matrix composites via friction stir processing

    Directory of Open Access Journals (Sweden)

    S. Joyson Abraham

    2016-12-01

    Full Text Available Friction stir processing (FSP has been accepted as a potential method to produce aluminum matrix composites (AMCs without the drawbacks of liquid metallurgy methods. The present work focuses on the development of AMCs reinforced with quartz (SiO2 particles using FSP. Grooves with various dimensions were machined on AA6063 plates and compacted with quartz particles. A single pass FSP was carried out using a combination of optimized process parameters. The volume fraction of quartz particles in the AMCs was varied from 0 to 18 vol.% in steps of 6 vol.%. The developed AA6063/Quartz AMCs were characterized using optical, scanning and transmission electron microscopy. The quartz particles were distributed uniformly in the aluminum matrix irrespective of the location within the stir zone. The grains of the AA6063 were extensively refined by the combination of thermomechanical effect of FSP and the pinning effect of quartz particles. The dispersion of the quartz particles improved the microhardness and wear resistance of the AMCs. The role of quartz particles on the worn surface and wear debris is reported.

  9. Localisation of genes for resistance against ¤Blumeria graminis¤ f.sp. ¤hordei¤ and ¤Puccinia graminis¤ in a cross between a barley cultivar and a wild barley (¤Hordeum vulgare¤ ssp. ¤spontaneum¤) line

    DEFF Research Database (Denmark)

    Backes, G.; Madsen, L.H.; Jaiser, H.

    2003-01-01

    The aims of this investigation have been to map new (quantitative) resistance genes against powdery mildew, caused by Blumeria graminis f.sp. hordei L., and leaf rust, caused by Puccinia hordei L., in a cross between the barley (Hordeum vulgare ssp. vulgare) cultivar "Vada" and the wild barley...... (Hordeum vulgare ssp. spontaneum) line "1B-87" originating from Israel. The population consisted of 121 recombinant inbred lines. Resistance against leaf rust and powdery mildew was tested on detached leaves. The leaf rust isolate "I-80" and the powdery mildew isolate "Va-4", respectively, were used...

  10. Full page insight

    DEFF Research Database (Denmark)

    Cortsen, Rikke Platz

    2014-01-01

    Alan Moore and his collaborating artists often manipulate time and space by drawing upon the formal elements of comics and making alternative constellations. This article looks at an element that is used frequently in comics of all kinds – the full page – and discusses how it helps shape spatio......, something that it shares with the full page in comics. Through an analysis of several full pages from Moore titles like Swamp Thing, From Hell, Watchmen and Promethea, it is made clear why the full page provides an apt vehicle for an apocalypse in comics....

  11. Study of the suit inflation effect on crew safety during landing using a full-pressure IVA suit for new-generation reentry space vehicles

    Science.gov (United States)

    Wataru, Suzuki

    Recently, manned space capsules have been recognized as beneficial and reasonable human space vehicles again. The Dragon capsule already achieved several significant successes. The Orion capsule is going to be sent to a high-apogee orbit without crews for experimental purposes in September 2014. For such human-rated space capsules, the study of acceleration impacts against the human body during splashdown is essential to ensure the safety of crews. Moreover, it is also known that wearing a full pressure rescue suit significantly increases safety of a crew, compared to wearing a partial pressure suit. This is mainly because it enables the use of a personal life support system independently in addition to that which installed in the space vehicle. However, it is unclear how the inflation of the full pressure suit due to pressurization affects the crew safety during splashdown, especially in the case of the new generation manned space vehicles. Therefore, the purpose of this work is to investigate the effect of the suit inflation on crew safety against acceleration impact during splashdown. For this objective, the displacements of the safety harness in relation with the suit, a human surrogate, and the crew seats during pressurizing the suit in order to determine if the safety and survivability of a crew can be improved by wearing a full pressure suit. For these tests, the DL/H-1 full pressure IVA suit, developed by Pablo de Leon and Gary L. Harris, will be used. These tests use image analysis techniques to determine the displacements. It is expected, as a result of these tests, that wearing a full pressure suit will help to mitigate the impacts and will increase the safety and survivability of a crew during landing since it works as a buffer to mitigate impact forces during splashdown. This work also proposes a future plan for sled test experiments using a sled facility such as the one in use by the Civil Aerospace Medical Institute (CAMI) for experimental validation

  12. 2D full-wave simulation of waves in space and tokamak plasmas

    Science.gov (United States)

    Kim, Eun-Hwa; Bertelli, Nicola; Johnson, Jay; Valeo, Ernest; Hosea, Joel

    2017-10-01

    Simulation results using a 2D full-wave code (FW2D) for space and NSTX fusion plasmas are presented. The FW2D code solves the cold plasma wave equations using the finite element method. The wave code has been successfully applied to describe low frequency waves in planetary magnetospheres (i.e., dipole geometry) and the results include generation and propagation of externally driven ultra-low frequency waves via mode conversion at Mercury and mode coupling, refraction and reflection of internally driven field-aligned propagating left-handed electromagnetic ion cyclotron (EMIC) waves at Earth. In this paper, global structure of linearly polarized EMIC waves is examined and the result shows such resonant wave modes can be localized near the equatorial plane. We also adopt the FW2D code to tokamak geometry and examine radio frequency (RF) waves in the scape-off layer (SOL) of tokamaks. By adopting the rectangular and limiter boundary, we compare the results with existing AORSA simulations. The FW2D code results for the high harmonic fast wave heating case on NSTX with a rectangular vessel boundary shows excellent agreement with the AORSA code.

  13. RT-PCR and sequence analysis of the full-length fusion protein of Canine Distemper Virus from domestic dogs.

    Science.gov (United States)

    Romanutti, Carina; Gallo Calderón, Marina; Keller, Leticia; Mattion, Nora; La Torre, José

    2016-02-01

    During 2007-2014, 84 out of 236 (35.6%) samples from domestic dogs submitted to our laboratory for diagnostic purposes were positive for Canine Distemper Virus (CDV), as analyzed by RT-PCR amplification of a fragment of the nucleoprotein gene. Fifty-nine of them (70.2%) were from dogs that had been vaccinated against CDV. The full-length gene encoding the Fusion (F) protein of fifteen isolates was sequenced and compared with that of those of other CDVs, including wild-type and vaccine strains. Phylogenetic analysis using the F gene full-length sequences grouped all the Argentinean CDV strains in the SA2 clade. Sequence identity with the Onderstepoort vaccine strain was 89.0-90.6%, and the highest divergence was found in the 135 amino acids corresponding to the F protein signal-peptide, Fsp (64.4-66.7% identity). In contrast, this region was highly conserved among the local strains (94.1-100% identity). One extra putative N-glycosylation site was identified in the F gene of CDV Argentinean strains with respect to the vaccine strain. The present report is the first to analyze full-length F protein sequences of CDV strains circulating in Argentina, and contributes to the knowledge of molecular epidemiology of CDV, which may help in understanding future disease outbreaks. Copyright © 2015 Elsevier B.V. All rights reserved.

  14. Use of Sugammadex in Strumpell-Lorrain Disease: a Report of Two Cases

    Directory of Open Access Journals (Sweden)

    José Antonio Franco-Hernández

    2013-01-01

    Full Text Available Content: : Strumpell-Lorrain disease - or familial spastic paraplegia (FSP - is a rare hereditary neurological disorder, mainly characterized by variable degrees of stiffness and weakening of the muscles, with cognitive impairment, deafness, and ataxia in the more severe cases. We describe two female siblings with FSP programmed for cholecystectomy and subtotal colectomy, respectively, and also how we dealt with the anesthetic management in both cases and review the literature on this disease in relation to anesthesia. Keywords: Spastic Paraplegia, Hereditary, Anesthesia, Neuromuscular blockade/sugammadex.

  15. Effect of friction stir processing on erosion–corrosion behavior of nickel–aluminum bronze

    International Nuclear Information System (INIS)

    Lotfollahi, M.; Shamanian, M.; Saatchi, A.

    2014-01-01

    Highlights: • The average hardness value of the FSP samples was higher than cast sample. • Erosion–corrosion rate of the FSP samples was higher than cast sample. • The gravimetric analysis showed a negative synergy. - Abstract: In the present investigation, effects of Friction Stir Processing (FSP) on Erosion–Corrosion (E–C) behavior of Nickel–Aluminum Bronze (NAB) were studied by weight-loss measurements and surface characterization using an impingement jet test system. After FSP, the initial coarse microstructure of the cast NAB was transformed to a fine structure, and the porosity defects were eliminated. In addition, different FSP structures were produced by each rotation rate. Microhardness measurements showed a marked increase in FSP samples depending upon the FSP parameters. E–C tests were carried out by erodent at kinetic energies about 0.45 μJ and in 30°, 60° and 90° impact angles to simulate actual service conditions. The maximum weight-loss was observed in FSP samples and Scanning Electron Microscopy (SEM) results showed signs of brittle fracture mechanism in FSP samples. By gravimetric analysis, the degree of synergy was evaluated at 0.45 μJ kinetic energy at normal impact angle and negative synergy result implies the presence of a protective film on all sample surfaces

  16. Changes in Quality Characteristics of Pork Patties Containing Antioxidative Fish Skin Peptide or Fish Skin Peptide-loaded Nanoliposomes during Refrigerated Storage.

    Science.gov (United States)

    Bai, Jing-Jing; Lee, Jung-Gyu; Lee, Sang-Yoon; Kim, Soojin; Choi, Mi-Jung; Cho, Youngjae

    2017-01-01

    Marine fish skin peptides (FSP) have been widely studied due to their antioxidant and antimicrobial properties. We aimed to use a natural antioxidant, FSP, to replacing synthetic preservatives in a pork patty model, which is safer for human body. Moreover, nano-liposome technology can be applied for masking the fishy smell and improving the stability of this peptide. Therefore, in this study, the effects of FSP and FSP-loaded liposomes (FSPL) on pork patty were evaluated through the tests of thiobarbituric acid reactive substances (TBARS), color, cooking loss, texture, volatile basic nitrogen (VBN), and the pH value, during 14 d of refrigerated (4°C) storage. The results showed that all FSP-treated patties had lower TBARS values than control patties, which indicated an inhibitory effect of FSP on lipid oxidation. This effect in the patties depended on the FSP concentration. However, FSPL-treated patties showed significantly higher and undesirable TBARS values compared to the control, and this effect depended on the FSPL concentration. None of the physicochemical results showed remarkable changes except the pH and VBN values. Therefore, this study provides evidence that FSP has great potential to inhibit the lipid oxidation of pork patties and is capable of maintaining the quality and extending the shelf life. However, it is necessary to study the application of FSP treatments greater than 3% to improve the antioxidant effect on pork patties and search for other coating materials and technology to reduce the drawbacks of FSP.

  17. Periodontal status of teeth restored with crowns and its contralateral homologue, Valdivia- Chile.

    OpenAIRE

    Israel Antonio Juárez; Sofía Larroulet; Makarena Ojeda; Cristian Rosas

    2015-01-01

    ABSTRACT Aim: To determine periodontal status of fixes single prostheses (FSP) made during the year 2013 in Austral University of Chile, and its contralateral homologue (CH).Methods: All patients with FSP made during 2013, that met the selection criteria and agreed to participate were evaluated. During the year 2014 was measured: probing depth, attachment level; bleeding on probing and dental plaque index for each FSP and CH; and consigned biological width invasion. Were measured one FSP...

  18. Testing of an Annular Linear Induction Pump for the Fission Surface Power Technology Demonstration Unit

    Science.gov (United States)

    Polzin, K. A.; Pearson, J. B.; Webster, K.; Godfoy, T. J.; Bossard, J. A.

    2013-01-01

    decision makers to consider FSP as a viable option for potential future flight development. The pump must be compatible with the liquid NaK coolant and have adequate performance to enable a viable flight system. Idaho National Laboratory (INL) was tasked with the design and fabrication of an ALIP suitable for the FSP reference mission. Under the program, a quarter-scale FSP technology demonstration is under construction to test the end-to-end conversion of simulated nuclear thermal power to usable electrical power intended to raise the entire FSP system to Technology Readiness Level 6. An ALIP for this TDU was fabricated under the direction of the INL and shipped to NASA Marshall Space Flight Center (MSFC) for testing at representative operating conditions. This pump was designed to meet the requirements of the TDU experiment. The ALIP test circuit (ATC) at MSFC, previously used to conduct performance evaluation on another ALIP6 was used to test the present TDU pump for the FSP Technology Development program.

  19. A primer on Hilbert space theory linear spaces, topological spaces, metric spaces, normed spaces, and topological groups

    CERN Document Server

    Alabiso, Carlo

    2015-01-01

    This book is an introduction to the theory of Hilbert space, a fundamental tool for non-relativistic quantum mechanics. Linear, topological, metric, and normed spaces are all addressed in detail, in a rigorous but reader-friendly fashion. The rationale for an introduction to the theory of Hilbert space, rather than a detailed study of Hilbert space theory itself, resides in the very high mathematical difficulty of even the simplest physical case. Within an ordinary graduate course in physics there is insufficient time to cover the theory of Hilbert spaces and operators, as well as distribution theory, with sufficient mathematical rigor. Compromises must be found between full rigor and practical use of the instruments. The book is based on the author's lessons on functional analysis for graduate students in physics. It will equip the reader to approach Hilbert space and, subsequently, rigged Hilbert space, with a more practical attitude. With respect to the original lectures, the mathematical flavor in all sub...

  20. Solution-blown nanofiber mats from fish sarcoplasmic protein

    DEFF Research Database (Denmark)

    Sett, S.; Boutrup Stephansen, Karen; Yarin, A.L.

    2016-01-01

    In the present work, solution-blowing was adopted to form nanofibers from fish sarcoplasmic proteins (FSPs). Nanofiber mats containing different weight ratios (up to 90/10) of FSP in the FSP/nylon 6 blended nanofibers were formed from formic acid solutions, and compared to electrospun fibers made...... that the production rate of solution-blowing was increased 30-fold in relation to electrospinning. Overall, this study reveals FSP as an interesting biopolymeric alternative to synthetic polymers, and the introduction of FSP to nylon 6 provides a composite with controlled properties....

  1. The comparison between Intrauterine Insemination and Fallopian Tube Sperm Perfusion Using FAST® System in Patients with Unexplained Infertility

    Directory of Open Access Journals (Sweden)

    Sepideh Peivandi

    2015-02-01

    Full Text Available Background: Controlled ovarian stimulation (COH with intrauterine insemination (IUI is commonly offered to infertile couples with patent fallopian tubes because it is simple, non-invasive and cost-effective technique. Another non-invasive method is fallopian tube sperm perfusion (FSP. This study was performed to compare the relative efficacy between FSP using fallopian sperm transfer (FAST system and standard IUI in patients with unexplained infertility. Materials and Methods: This prospective randomized study was conducted at the IVF Unit, Department of Gynecology and Obstetrics, Mazandaran University of Medical Sciences, Sari, Iran, from March 2011 to February 2012. A total of ninety patients with unexplained infertility underwent ovarian stimulation with clomiphene citrate and human menopausal gonadotropin (HMG. Patients were then randomly assigned into either group I (n=45 to undergo standard IUI or group II (n=45 to undergo FSP using FAST system. Results: The patients’ basic characteristics, including age, primary infertility and duration of infertility, were not significantly different between two study groups. In the group I, there were 9 pregnancies (a pregnancy rate per cycle of 20%, whereas in the group II, 8 pregnancies occurred (a pregnancy rate per cycle of 17.8%, p>0.05. Conclusion: FSP using FAST system offers no advantage over the standard IUI in order to increase pregnancy rate in patients with unexplained infertility.

  2. Underground spaces/cybernetic spaces

    Directory of Open Access Journals (Sweden)

    Tomaž Novljan

    2000-01-01

    Full Text Available A modern city space is a space where in the vertical and horizontal direction dynamic, non-linear processes exist, similar as in nature. Alongside the “common” city surface, cities have underground spaces as well that are increasingly affecting the functioning of the former. It is the space of material and cybernetic communication/transport. The psychophysical specifics of using underground places have an important role in their conceptualisation. The most evident facts being their limited volume and often limited connections to the surface and increased level of potential dangers of all kinds. An efficient mode for alleviating the effects of these specific features are artistic interventions, such as: shape, colour, lighting, all applications of the basic principles of fractal theory.

  3. Effect of Post Heat Treatment on the Microstructure and Microhardness of Friction Stir Processed NiAl Bronze (NAB Alloy

    Directory of Open Access Journals (Sweden)

    Yuting Lv

    2015-09-01

    Full Text Available NiAl bronze (NAB alloy is prepared by using friction stir processing (FSP technique at a tool rotation rate of 1200 rpm and a traverse speed of 150 mm/min. A post heat treatment is performed at the temperature of 675 °C. The effect of heat treatment on the microstructure and microhardness is studied. The results show that the microstructure of the FSP NAB alloy consists of high density dislocations, retained β phase (β′ phase and recrystallized grains. When annealed at 675 °C, discontinuous static recrystallization (DSRX takes place. The content of β′ phase gradually decreases and fine κ phase is precipitated. After annealing for 2 h, both the microhardness of the FSP sample in the stir zone (SZ and the difference in hardness between the SZ and base metal decrease due to the reduction of the dislocation density and β′ phase, accompanying recrystallized grain coarsening. With further increasing of the annealing time to 4 h, the aforementioned difference in hardness nearly disappears.

  4. Microstructure and sliding wear characterization of Cu/TiB2 copper matrix composites fabricated via friction stir processing

    Directory of Open Access Journals (Sweden)

    I. Dinaharan

    2017-09-01

    Full Text Available The poor wear performance of copper is improved by reinforcing hard ceramic particles. The present work reports the fabrication of Cu/TiB2 (0, 6, 12, 18 vol.% copper matrix composites (CMCs using friction stir processing (FSP. TiB2 particles were initially packed together into a machined groove and were subjected to FSP under a constant set of process parameters. The microstructure was observed using optical, scanning and transmission electron microscopy. The wear behavior was examined using a pin-on-disc apparatus. The micrographs showed a homogeneous distribution of TiB2 particles without aggregation and segregation. The distribution of TiB2 particles was closely persistent across the stir zone. TiB2 particles were well bonded with the copper matrix without any interfacial reaction. Many TiB2 particles fractured during FSP. The grains in the composite were extensively refined because of dynamic recrystallization and pinning effect of TiB2 particles. The wear behavior under dry sliding condition was presented in detail.

  5. Identification of an MSI-H Tumor-Specific Cytotoxic T Cell Epitope Generated by the (−1 Frame of U79260(FTO

    Directory of Open Access Journals (Sweden)

    Michael Linnebacher

    2010-01-01

    Full Text Available Microsatellite instability (MSI-H induced by defects of the DNA mismatch repair system results in insertion or deletion of single nucleotides at short repetitive DNA sequences. About 15% of sporadic and approximately 90% of hereditary nonpolyposis colorectal cancers display MSI-H. When affecting coding regions, MSI-H results in frameshift mutations and expression of corresponding frameshift peptides (FSPs. Functional tumor promoting relevance has been demonstrated for a growing number of genes frequently hit by MSI-H. Contrary, immune reactions against FSPs are involved in the immune surveillance of MSI-H cancers. Here, we provide conclusive data that the (−1 frame of U79260(FTO encodes an HLA-A0201-restricted cytotoxic T cell epitope (FSP11; TLSPGWSAV. T cells specific for FSP11 efficiently recognized HLA-A0201(pos tumor cells harboring the mutated reading frame. Considering the exceptionally high mutation rate of U79260(FTO in MSI-H colorectal carcinoma (81.8%, this recommends that FSP11 be a component of future vaccines.

  6. Tungsten particle reinforced Al 5083 composite with high strength and ductility

    Energy Technology Data Exchange (ETDEWEB)

    Bauri, Ranjit, E-mail: rbauri@iitm.acin; Yadav, Devinder; Shyam Kumar, C.N.; Balaji, B.

    2015-01-03

    Tungsten particles were incorporated into an Al 5083 matrix by friction stir processing (FSP). FSP resulted in uniform dispersion of the tungsten particles with excellent interfacial bonding and more importantly without the formation of any harmful intermetallics. For the first time, the particles penetrated to a depth equal to the full pin length of the tool. A novel aspect of the 5083 Al–W composite is that it showed an improvement of more than 100 MPa in the UTS and at the same time exhibited a high ductility (30%). The ductility was also evident from the well defined dimples in the fracture surface which also revealed the superior bonding between the particles and the matrix. FSP also resulted in substantial grain refinement of the Al matrix. Electron backscatter diffraction (EBSD) and transmission electron microscopy analysis revealed that the fine grains formed by dynamic recrystallization. A gradual transformation from sub-grain to high-angle grain boundaries was observed from EBSD analysis pointing towards the occurrence of a continuous type of dynamic recrystallization process.

  7. Multi-scale full-orbit analysis on phase-space behavior of runaway electrons in tokamak fields with synchrotron radiation

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Yulei; Liu, Jian, E-mail: jliuphy@ustc.edu.cn [School of Nuclear Science and Technology and Department of Modern Physics, University of Science and Technology of China, Hefei, Anhui 230026 (China); Key Laboratory of Geospace Environment, CAS, Hefei, Anhui 230026 (China); Qin, Hong [School of Nuclear Science and Technology and Department of Modern Physics, University of Science and Technology of China, Hefei, Anhui 230026 (China); Plasma Physics Laboratory, Princeton University, Princeton, New Jersey 08543 (United States)

    2016-06-15

    In this paper, the secular full-orbit simulations of runaway electrons with synchrotron radiation in tokamak fields are carried out using a relativistic volume-preserving algorithm. Detailed phase-space behaviors of runaway electrons are investigated in different dynamical timescales spanning 11 orders. In the small timescale, i.e., the characteristic timescale imposed by Lorentz force, the severely deformed helical trajectory of energetic runaway electron is witnessed. A qualitative analysis of the neoclassical scattering, a kind of collisionless pitch-angle scattering phenomena, is provided when considering the coupling between the rotation of momentum vector and the background magnetic field. In large timescale up to 1 s, it is found that the initial condition of runaway electrons in phase space globally influences the pitch-angle scattering, the momentum evolution, and the loss-gain ratio of runaway energy evidently. However, the initial value has little impact on the synchrotron energy limit. It is also discovered that the parameters of tokamak device, such as the toroidal magnetic field, the loop voltage, the safety factor profile, and the major radius, can modify the synchrotron energy limit and the strength of neoclassical scattering. The maximum runaway energy is also proved to be lower than the synchrotron limit when the magnetic field ripple is considered.

  8. System Transformation Under the California Mental Health Services Act: Implementation of Full-Service Partnerships in L.A. County.

    Science.gov (United States)

    Starks, Sarah L; Arns, Paul G; Padwa, Howard; Friedman, Jack R; Marrow, Jocelyn; Meldrum, Marcia L; Bromley, Elizabeth; Kelly, Erin L; Brekke, John S; Braslow, Joel T

    2017-06-01

    The study evaluated the effect of California's Mental Health Services Act (MHSA) on the structure, volume, location, and patient centeredness of Los Angeles County public mental health services. This prospective mixed-methods study (2006-2013) was based in five Los Angeles County public mental health clinics, all with usual care and three with full-service partnerships (FSPs). FSPs are MHSA-funded programs designed to "do whatever it takes" to provide intensive, recovery-oriented, team-based, integrated services for clients with severe mental illness. FSPs were compared with usual care on outpatient services received (claims data) and on organizational climate, recovery orientation, and provider-client working alliance (surveys and semistructured interviews), with regression adjustment for client and provider characteristics. In the first year after admission, FSP clients (N=174) received significantly more outpatient services than did usual care clients (N=298) (5,238 versus 1,643 minutes, pservices were field based (22% versus 2%, poriented services (pservice delivery in response to well-funded policy mandates. For providers, a structure emphasizing accountability and patient centeredness was associated with greater stress, despite smaller caseloads. For clients, service structure and volume created opportunities to build stronger provider-client relationships and address their needs and goals.

  9. A solution thermodynamics definition of the fiber saturation point and the derivation of a wood-water phase (state) diagram

    Science.gov (United States)

    Samuel L. Zelinka; Samuel V. Glass; Joseph E. Jakes; Donald S. Stone

    2016-01-01

    The fiber saturation point (FSP) is an important concept in wood– moisture relations that differentiates between the states of water in wood and has been discussed in the literature for over 100 years. Despite its importance and extensive study, the exact theoretical definition of the FSP and the operational definition (the correct way to measure the FSP) are still...

  10. ZOCO VI - a computer code to calculate the time- and space-dependent pressure distribution in full pressure containments of water-cooled reactors

    International Nuclear Information System (INIS)

    Mansfeld, G.

    1974-12-01

    ZOCO VI is a computer code to investigate the time and space dependent pressure distribution in full pressure containment of water cooled nuclear power reactors following a loss-of-coolant accident, which is caused by the rupture of a main coolant or steam line. ZOCO VI is an improved version of the computer code ZOCO V with enlarged description of condensing events. (orig.) [de

  11. A Potential Method for Body and Surface Wave Propagation in Transversely Isotropic Half- and Full-Spaces

    Directory of Open Access Journals (Sweden)

    Mehdi Raoofian Naeeni

    2016-12-01

    Full Text Available The problem of propagation of plane wave including body and surface waves propagating in a transversely isotropic half-space with a depth-wise axis of material symmetry is investigated in details. Using the advantage of representation of displacement fields in terms of two complete scalar potential functions, the coupled equations of motion are uncoupled and reduced to two independent equations for potential functions. In this paper, the secular equations for determination of body and surface wave velocities are derived in terms of both elasticity coefficients and the direction of propagation. In particular, the longitudinal, transverse and Rayleigh wave velocities are determined in explicit forms. It is also shown that in transversely isotropic materials, a Rayleigh wave may propagate in different manner from that of isotropic materials. Some numerical results for synthetic transversely isotropic materials are also illustrated to show the behavior of wave motion due to anisotropic nature of the problem.

  12. Using full configuration interaction quantum Monte Carlo in a seniority zero space to investigate the correlation energy equivalence of pair coupled cluster doubles and doubly occupied configuration interaction

    International Nuclear Information System (INIS)

    Shepherd, James J.; Henderson, Thomas M.; Scuseria, Gustavo E.

    2016-01-01

    Over the past few years, pair coupled cluster doubles (pCCD) has shown promise for the description of strong correlation. This promise is related to its apparent ability to match results from doubly occupied configuration interaction (DOCI), even though the latter method has exponential computational cost. Here, by modifying the full configuration interaction quantum Monte Carlo algorithm to sample only the seniority zero sector of Hilbert space, we show that the DOCI and pCCD energies are in agreement for a variety of 2D Hubbard models, including for systems well out of reach for conventional configuration interaction algorithms. Our calculations are aided by the sign problem being much reduced in the seniority zero space compared with the full space. We present evidence for this and then discuss the sign problem in terms of the wave function of the system which appears to have a simplified sign structure.

  13. Origin, Migration Routes and Worldwide Population Genetic Structure of the Wheat Yellow Rust Pathogen Puccinia striiformis f.sp. tritici

    Science.gov (United States)

    Ali, Sajid; Gladieux, Pierre; Leconte, Marc; Gautier, Angélique; Justesen, Annemarie F.; Hovmøller, Mogens S.; Enjalbert, Jérôme; de Vallavieille-Pope, Claude

    2014-01-01

    Analyses of large-scale population structure of pathogens enable the identification of migration patterns, diversity reservoirs or longevity of populations, the understanding of current evolutionary trajectories and the anticipation of future ones. This is particularly important for long-distance migrating fungal pathogens such as Puccinia striiformis f.sp. tritici (PST), capable of rapid spread to new regions and crop varieties. Although a range of recent PST invasions at continental scales are well documented, the worldwide population structure and the center of origin of the pathogen were still unknown. In this study, we used multilocus microsatellite genotyping to infer worldwide population structure of PST and the origin of new invasions based on 409 isolates representative of distribution of the fungus on six continents. Bayesian and multivariate clustering methods partitioned the set of multilocus genotypes into six distinct genetic groups associated with their geographical origin. Analyses of linkage disequilibrium and genotypic diversity indicated a strong regional heterogeneity in levels of recombination, with clear signatures of recombination in the Himalayan (Nepal and Pakistan) and near-Himalayan regions (China) and a predominant clonal population structure in other regions. The higher genotypic diversity, recombinant population structure and high sexual reproduction ability in the Himalayan and neighboring regions suggests this area as the putative center of origin of PST. We used clustering methods and approximate Bayesian computation (ABC) to compare different competing scenarios describing ancestral relationship among ancestral populations and more recently founded populations. Our analyses confirmed the Middle East-East Africa as the most likely source of newly spreading, high-temperature-adapted strains; Europe as the source of South American, North American and Australian populations; and Mediterranean-Central Asian populations as the origin of

  14. Expression of cancer-associated fibroblast-related proteins differs between invasive lobular carcinoma and invasive ductal carcinoma.

    Science.gov (United States)

    Park, Cheol Keun; Jung, Woo Hee; Koo, Ja Seung

    2016-08-01

    Cancer-associated fibroblasts (CAFs) are classified into various functional subtypes such as fibroblast activation protein-α (FAP-α), fibroblast specific protein-1 (FSP-1), platelet-derived growth factor receptor-α (PDGFR-α), and PDGFR-β. In this study, we compared the expression of CAF-related proteins in invasive lobular carcinoma (ILC) with those in invasive carcinoma of no special type (NST) and assessed the implications of the differences observed. Using tissue microarrays of 104 ILC and 524 invasive carcinoma (NST) cases, immunohistochemistry for CAF-related proteins [podoplanin, prolyl 4-hydroxylase, FAP-α, FSP-1/S100A4, PDGFR-α, PDGFR-β, and chondroitin sulfate proteoglycan (NG2)] was conducted. In invasive carcinoma (NST), tumor cells expressed a high level of PDGFR-α, whereas ILC tumor cells expressed high levels of podoplanin, prolyl 4-hydroxylase, FAP-α, and FSP-1/S100A4. In stromal cells of invasive carcinoma (NST), high expression levels of prolyl 4-hydroxylase, PDGFR-α, and NG2 were observed, whereas ILC stromal cells expressed high levels of FAP-α, FSP-1/S100A4, and PDGFR-β. In ILC, tumoral FSP-1/S100A4 positivity was associated with higher Ki-67 labeling index (p = 0.010) and non-luminal A type cancer (p = 0.014). Stromal PDGFR-α positivity was associated with lymph node metastasis (p = 0.011). On survival analysis of entire cases, tumoral FSP-1/S100A4 positivity (p = 0.002), stromal podoplanin positivity (p = 0.041), and stromal FSP-1/S100A4 negativity (p = 0.041) were associated with shorter disease-free survival; only tumoral FSP-1/S100A4 positivity (p = 0.044) was associated with shorter overall survival. In ILC, the expression of FAP-α and FSP-1/S100A4 was higher in both tumor and stromal cells than that observed in invasive carcinoma (NST). These results indicate that CAFs are a potential target in ILC treatment.

  15. Another extension of Orlicz-Sobolev spaces to metric spaces

    Directory of Open Access Journals (Sweden)

    Noureddine Aïssaoui

    2004-01-01

    Full Text Available We propose another extension of Orlicz-Sobolev spaces to metric spaces based on the concepts of the Φ-modulus and Φ-capacity. The resulting space NΦ1 is a Banach space. The relationship between NΦ1 and MΦ1 (the first extension defined in Aïssaoui (2002 is studied. We also explore and compare different definitions of capacities and give a criterion under which NΦ1 is strictly smaller than the Orlicz space LΦ.

  16. Quasi-uniform Space

    Directory of Open Access Journals (Sweden)

    Coghetto Roland

    2016-09-01

    Full Text Available In this article, using mostly Pervin [9], Kunzi [6], [8], [7], Williams [11] and Bourbaki [3] works, we formalize in Mizar [2] the notions of quasiuniform space, semi-uniform space and locally uniform space.

  17. Experimental behavior of full-scale exterior beam-column space joints retrofitted by ferrocement layers under cyclic loading

    Directory of Open Access Journals (Sweden)

    Ibrahim G. Shaaban

    2018-06-01

    Full Text Available A majority of the traditional reinforced concrete frame buildings, existing across the Middle East, lack adequate confinement in beam-column joints, or in other words, are shear deficient because they were constructed before the introduction of seismic codes for construction. This research studies the experimental behavior of full-scale beam-column space (three-dimensional joints under displacement-controlled cyclic loading. Eleven joint specimens, included a traditionally reinforced one (without adequate shear reinforcement, a reference one with sufficient shear reinforcement according to ACI 318, and nine specimens retrofitted by ferrocement layers, were experimentally tested to evaluate a retrofit technique for strengthening shear deficient beam column joints. The studied variables were the number of layers, orientation angle of expanded wire mesh per layer, and presence of steel angles in the corners of joint specimen prior to wrapping with ferrocement layers. The experimental results showed that proper shear reinforcement for the test joints, according to ACI 318, enhanced the behavior of the specimen over that of the traditionally reinforced specimens without adequate shear reinforcement. The joints retrofitted by ferrocement layers showed higher ultimate capacity, higher ultimate displacement prior to failure (better ductility, and they did not suffer heavily damage as observed for the traditionally reinforced one. Increasing the number of ferrocement layers for retrofitted specimens led to improving performance for such specimens compared to the traditionally reinforced ones in terms of enhancing the ultimate capacity and ultimate displacement. Specimens retrofitted by ferrocement layers reinforced by expanded wire mesh of 60° orientation angle showed slightly better performance than those of 45° orientation angles. Retrofitting using steel angles in addition to ferrocement layers improves the seismic performance of the specimens

  18. CPR performance in the presence of audiovisual feedback or football shoulder pads.

    Science.gov (United States)

    Tanaka, Shota; Rodrigues, Wayne; Sotir, Susan; Sagisaka, Ryo; Tanaka, Hideharu

    2017-01-01

    The initiation of cardiopulmonary resuscitation (CPR) can be complicated by the use of protective equipment in contact sports, and the rate of success in resuscitating the patient depends on the time from incident to start of CPR. The aim of our study was to see if (1) previous training, (2) the presence of audiovisual feedback and (3) the presence of football shoulder pads (FSP) affected the quality of chest compressions. Six basic life support certified athletic training students (BLS-ATS), six basic life support certified emergency medical service personnel (BLS-EMS) and six advanced cardiac life support certified emergency medical service personnel (ACLS-EMS) participated in a crossover manikin study. A quasi-experimental repeated measures design was used to measure the chest compression depth (cm), rate (cpm), depth accuracy (%) and rate accuracy (%) on four different conditions by using feedback and/or FSP. Real CPR Help manufactured by ZOLL (Chelmsford, Massachusetts, USA) was used for the audiovisual feedback. Three participants from each group performed 2 min of chest compressions at baseline first, followed by compressions with FSP, with feedback and with both FSP and feedback (FSP+feedback). The other three participants from each group performed compressions at baseline first, followed by compressions with FSP+feedback, feedback and FSP. CPR performance did not differ between the groups at baseline (median (IQR), BLS-ATS: 5.0 (4.4-6.1) cm, 114(96-131) cpm; BLS-EMS: 5.4 (4.1-6.4) cm, 112(99-131) cpm; ACLS-EMS: 6.4 (5.7-6.7) cm, 138(113-140) cpm; depth p=0.10, rate p=0.37). A statistically significant difference in the percentage of depth accuracy was found with feedback (median (IQR), 13.8 (0.9-49.2)% vs 69.6 (32.3-85.8)%; p=0.0002). The rate accuracy was changed from 17.1 (0-80.7)% without feedback to 59.2 (17.3-74.3)% with feedback (p=0.50). The use of feedback was effective for depth accuracy, especially in the BLS-ATS group, regardless of the

  19. A model to describe the surface gradient-nanograin formation and property of friction stir processed laser Co-Cr-Ni-Mo alloy

    Science.gov (United States)

    Li, Ruidi; Yuan, Tiechui; Qiu, Zili

    2014-07-01

    A gradient-nanograin surface layer of Co-base alloy was prepared by friction stir processing (FSP) of laser-clad coating in this work. However, it is lack of a quantitatively function relationship between grain refinement and FSP conditions. Based on this, an analytic model is derived for the correlations between carbide size, hardness and rotary speed, layer depth during in-situ FSP of laser-clad Co-Cr-Ni-Mo alloy. The model is based on the principle of typical plastic flow in friction welding and dynamic recrystallization. The FSP experiment for modification of laser-clad Co-based alloy was conducted and its gradient nanograin and hardness were characterized. It shows that the model is consistent with experimental results.

  20. F-door spaces and F-submaximal spaces

    Directory of Open Access Journals (Sweden)

    Lobna Dridi

    2013-04-01

    Full Text Available Submaximal spaces and door spaces play an enigmatic role in topology. In this paper, reinforcing this role, we are concerned with reaching two main goals: The first one is to characterize topological spaces X such that F(X is a submaximal space (resp., door space for some covariant functor Ff rom the category Top to itself. T0, and FH functors are completely studied. Secondly, our interest is directed towards the characterization of maps f given by a flow (X, f in the category Set, such that (X,P(f is submaximal (resp., door where P(f is a topology on X whose closed sets are exactly the f-invariant sets.

  1. A new tool to quantify the geometrical characteristics of facial skin pores. Changes with age and a making-up procedure in Caucasian women.

    Science.gov (United States)

    Shaiek, A; Flament, F; François, G; Lefebvre-Descamps, V; Barla, C; Vicic, M; Giron, F; Bazin, R

    2017-05-01

    Facial skin pores (FSP) are common and benign signs that generate frequent esthetic concerns or complaints. Despite their worldwide prevalence, related literature remains scarce. Hence, a new device has been developed and applied to validating studies, aiming at best describing FSP as they are self-perceived, i.e. their anatomic features, their possible alterations with age and their appearance after application of a make-up product. Dermascore+ ® is an imaging device dedicated to a direct observation and acquisition of various characteristics of the skin surface. Images are captured under a high magnification and under different lighting configurations, to highlight the skin relief, based upon parallel polarized images. Dedicated software allows FSP to being detected and their morphological parameters to being extracted and computed. By measuring each detected FSP in a given region of interest, a statistically significant impact of both age and an applied cosmetic product upon their morphological features can be observed and quantified. Although the size and density of FSP are not affected by aging, their shape becomes elongated. A few tested make up products show variable effects that closely correlate with visual assessments made by trained estheticians. The shape of FSP present on cheeks shows age-related changes, toward a more elongated aspect, likely linked to a progressively altered (more isotropic) skin surface micro-relief. The new tool Dermascore+ ® allows foundations to being rapidly differentiated and screened according to their variable effects upon the visual appearance through instrumental, objective depiction of FSP. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  2. Ni-SiO2 Catalysts for the Carbon Dioxide Reforming of Methane: Varying Support Properties by Flame Spray Pyrolysis

    Directory of Open Access Journals (Sweden)

    Emma C. Lovell

    2015-03-01

    Full Text Available Silica particles were prepared by flame spray pyrolysis (FSP as a support for nickel catalysts. The impact of precursor feed rate (3, 5 and 7 mL/min during FSP on the silica characteristics and the ensuing effect on catalytic performance for the carbon dioxide, or dry, reforming of methane (DRM was probed. Increasing the precursor feed rate: (i progressively lowered the silica surface area from ≈340 m2/g to ≈240 m2/g; (ii altered the silanol groups on the silica surface; and (iii introduced residual carbon-based surface species to the sample at the highest feed rate. The variations in silica properties altered the (5 wt % nickel deposit characteristics which in turn impacted on the DRM reaction. As the silica surface area increased, the nickel dispersion increased which improved catalyst performance. The residual carbon-based species also appeared to improve nickel dispersion, and in turn catalyst activity, although not to the same extent as the change in silica surface area. The findings illustrate both the importance of silica support characteristics on the catalytic performance of nickel for the DRM reaction and the capacity for using FSP to control these characteristics.

  3. The Impact of the Free Swimming Programme in a Local Community in the South East of England: Giving with One Hand, Taking Away with the Other

    Directory of Open Access Journals (Sweden)

    Themis Kokolakakis

    2015-04-01

    Full Text Available The purpose of this study is to examine the impact of the introduction of the Free Swimming Programme (FSP in a local community (not identified to preserve anonymity in the South East of England. The question has been approached in a variety of ways: by using primary quantitative data from leisure centres and logistic regressions based on the Active People Survey (APS. Problems are identified related to the introduction of the FSP in this community and suggestions are made for future policy. A brief examination of swimming participation in England enables researchers to place this community into a national context. The problems and policies of sport organisation developed in this community are not dissimilar to a more general application reflecting the English experience; in this sense it is anticipated that the findings will enable managers of sport organisations, along with public health policy makers, to focus more effectively on raising sport participation. The unique selling points of this article are the examination of FSP for adult participants, the local analysis of junior and senior participation, and the overall assessment of the policy based on APS.

  4. Simulation of Friction Stir Processing in 304L Stainless Steel

    Directory of Open Access Journals (Sweden)

    Miles M.P.

    2016-01-01

    Full Text Available A major dilemma facing the nuclear industry is repair or replacement of stainless steel reactor components that have been exposed to neutron irradiation. When conventional fusion welding is used for weld repair, the high temperatures and thermal stresses inherent in the process enhance the growth of helium bubbles, causing intergranular cracking in the heat-affected zone (HAZ. Friction stir processing (FSP has potential as a weld repair technique for irradiated stainless steel, because it operates at much lower temperatures than fusion welding, and is therefore less likely to cause cracking in the HAZ. Numerical simulation of the FSP process in 304L stainless steel was performed using an Eulerian finite element approach. Model input required flow stresses for the large range of strain rates and temperatures inherent in the FSP process. Temperature predictions in three locations adjacent to the stir zone were accurate to within 4% of experimentally measure values. Prediction of recrystallized grain size at a location about 6mm behind the tool center was less accurate, because the empirical model employed for the prediction did not account for grain growth that occurred after deformation in the experiment was halted.

  5. Friction welding; Magnesium; Finite element; Shear test.

    Directory of Open Access Journals (Sweden)

    Leonardo Contri Campanelli

    2013-06-01

    Full Text Available Friction spot welding (FSpW is one of the most recently developed solid state joining technologies. In this work, based on former publications, a computer aided draft and engineering resource is used to model a FSpW joint on AZ31 magnesium alloy sheets and subsequently submit the assembly to a typical shear test loading, using a linear elastic model, in order to conceive mechanical tests results. Finite element analysis shows that the plastic flow is concentrated on the welded zone periphery where yield strength is reached. It is supposed that “through the weld” and “circumferential pull-out” variants should be the main failure behaviors, although mechanical testing may provide other types of fracture due to metallurgical features.

  6. Microstructure and wear behavior of friction stir processed cast hypereutectic aluminum silicon

    Directory of Open Access Journals (Sweden)

    Ahmad Rosli

    2017-01-01

    Full Text Available Hypereutectic as-cast Al-18Si-Cu-Ni alloy was subjected to friction stir processing (FSP. The resultant effect of FSP on the alloy was evaluated by microstructure analysis and wear tests (dry sliding. A significant microstructural modification and enhancement in wear behavior of Al-18Si-Cu-Ni alloy was recorded after friction stir processing. Wear resistance improvement was related to considerable modification in size, morphology and distribution of silicon particles, and hardness improvement. It was found that lower tool rotation speed was more effective to refine silicon particles and in turn increase wear resistance. Minimum Si particle mean area of about 47.8 µm2, and wear rate of 0.0155 mg/m was achieved.

  7. In-Vitro Evaluation of Fungicides and Fungicide Combinations Against Fusarium Root-Rot Fungal Pathogens of French Beans(Phaseolus Vulgaris L. c v. Monel

    International Nuclear Information System (INIS)

    Wagichunge, A.G.R; Owino, P.O; Waudo, S.W; Seif, A.A

    1999-01-01

    Laboratories studies were undertaken to evaluate In-vitro efficacy of captan, thiram, pyrazophos, triforine and metalaxyl + mancozeb fungicides against Fusarium solani (Mart.) Appel and Wollenw fsp. phaseoli (Burk) Synder and Hansen Fusarium oxysporum Schlecht fsp. phaseoli kend and Synder root-rot fungal pathogens of French beans. Five fungicides and four combinations were tested for their antifungal activity. Fungicides treatments significantly (P=0.05) inhibited mycelial growth and spore germination. Fungicides suppressed the growth of F. oxysporum fsp. Phaseoli more than that of F. solani fsp. phaseoli. All fungicides except metalaxyl + mancozeb failed to suppress sporulation of the two fungi In-vitro. In the case of thiram the sporulation capacity of F. oxysporum fsp. phaseoli 3.43 times higher than in the control. Although, no fungicides treatment was seen to inhibitor of all the three measures of fungitoxicity, the ranking of the best three fungicide treatments would be, thiram 50 + captan so > triforine > metalaxyl + mancozeb. The relatively higher inhibitory effect of fungicides on the growth of F. oxysporum Ssp. Phaseoli than that of F. solani fsp. Phaseoli suggested that F. oxysporum Esp. Phaseoli was more sensible to fungicide treatments. Such differences may reflect inherent variations in accessibility of the active toxicants within the fungal systems. The ability attributed to the low growth rate, N depletion temperature and oxygen

  8. Topological Vector Space-Valued Cone Metric Spaces and Fixed Point Theorems

    Directory of Open Access Journals (Sweden)

    Radenović Stojan

    2010-01-01

    Full Text Available We develop the theory of topological vector space valued cone metric spaces with nonnormal cones. We prove three general fixed point results in these spaces and deduce as corollaries several extensions of theorems about fixed points and common fixed points, known from the theory of (normed-valued cone metric spaces. Examples are given to distinguish our results from the known ones.

  9. developing french for specific purposes in the nigerian university ...

    African Journals Online (AJOL)

    Ada

    teaching FSP to students in the Bachelor's degree programme of various disciplines seen as trainees in ... Nigerian universities, cannot also yield the required result. A different .... PROBLEMS OF TEACHING FSP IN NON- .... Certificate.

  10. Space Guidelines for Libraries.

    Science.gov (United States)

    Wisconsin Coordinating Committee for Higher Education, Madison.

    The following guidelines are recommended: stack space--for each 10 volumes, one square foot of space; reading room--25 square feet per station x 20% of the total undergraduate population; carrel space--25% of the graduate enrollment x 45 square feet; office and auxilliary space--135 square feet x full time equivalent staff. (NI)

  11. From Physical Campus Space to a Full-view Figure: University Atlas Compiling Based on `Information Design' Concept

    Science.gov (United States)

    Song, Ge; Tang, Xi; Zhu, Feng

    2018-05-01

    Traditional university maps, taking campus as the principal body, mainly realize the abilities of space localization and navigation. They don't take full advantage of map, such as multi-scale representations and thematic geo-graphical information visualization. And their inherent propaganda functions have not been entirely developed. Therefore, we tried to take East China Normal University (ECNU) located in Shanghai as an example, and integrated various information related to university propaganda need (like spatial patterns, history and culture, landscape ecology, disciplinary constructions, cooperation, social services, development plans and so on). We adopted the frontier knowledge of `information design' as well as kinds of information graphics and visualization solutions. As a result, we designed and compiled a prototype atlas of `ECNU Impression' to provide a series of views of ECNU, which practiced a new model of `narrative campus map'. This innovative propaganda product serves as a supplement to typical shows with official authority, data maturity, scientificity, dimension diversity, and timing integrity. The university atlas will become a usable media for university overall figure shaping.

  12. Molecular analysis of aspermic Fasciola flukes from Korea on the basis of the nuclear ITS1 region and mitochondrial DNA markers and comparison with Japanese aspermic Fasciola flukes.

    Science.gov (United States)

    Ichikawa, Madoka; Itagaki, Tadashi

    2012-07-01

    It has been speculated that populations of aspermic Fasciola flukes in Korea and Japan have a close phylogenetic relationship. To evaluate this, we analyzed 33 Korean aspermic Fasciola flukes on the basis of nuclear ribosomal internal transcribed spacer 1 (ITS1) and mitochondrial NADH dehydrogenase subunit 1 (nad1) and cytochrome c oxidase 1 (cox1) sequences. Fh, Fg, and Fh/Fg types were detected in the ITS1 region and displayed the fragment patterns of F. hepatica, F. gigantica, and both species, respectively by a polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) method. Additionally, three concatenated haplotypes of nad1 and cox1(nad1/cox1) were detected, and 2 of these, Kor1/Kor1 (Fsp1/Fsp1) haplotype and Kor2a/Kor2 (Fsp2/Fsp2) haplotype, were shared by Korean and Japanese aspermic flukes. The Fst value (0.019), calculated using the concatenated sequences, indicated that Korean and Japanese aspermic Fasciola populations were genetically undifferentiated. Interestingly, a combination of the Fh/Fg type and Kor1/Kor1 haplotype was found at the highest frequency in Korean aspermic flukes, whereas the Fg type and Fsp2/Fsp2 haplotype combination was found at a conspicuously high frequency in Japanese aspermic flukes. This indicates that a founder effect caused by the introduction of infected hosts may have played a key role in the introduction of aspermic Fasciola flukes from Korea into Japan.

  13. Improvement in cavitation erosion resistance of AISI 316L stainless steel by friction stir processing

    Energy Technology Data Exchange (ETDEWEB)

    Hajian, M. [Department of Materials Engineering, Tarbiat Modares University, P.O. Box 14115-143, Tehran (Iran, Islamic Republic of); Abdollah-zadeh, A., E-mail: zadeh@modares.ac.ir [Department of Materials Engineering, Tarbiat Modares University, P.O. Box 14115-143, Tehran (Iran, Islamic Republic of); Rezaei-Nejad, S.S.; Assadi, H. [Department of Materials Engineering, Tarbiat Modares University, P.O. Box 14115-143, Tehran (Iran, Islamic Republic of); Hadavi, S.M.M. [Department of Materials Science and Engineering, MA University of Technology, Tehran (Iran, Islamic Republic of); Chung, K. [Department of Materials Science and Engineering, Research Institute of Advanced Materials, Engineering Research Institute, Seoul National University, Seoul (Korea, Republic of); Shokouhimehr, M. [Department of Chemical Engineering, College of Engineering, Seoul National University, Seoul 151-742 (Korea, Republic of)

    2014-07-01

    Commercial AISI 316L plates with the initial grain size of 14.8 μm were friction stir processed (FSP) with different processing parameters, resulting in two fine-grained microstructures with the grain sizes of 4.6 and 1.7 μm. The cavitation erosion behavior, before and after FSP, was evaluated in terms of incubation time, cumulative mass loss and mean depth of erosion. A separate cavitation erosion test was performed on the transverse cross section of a FSP sample to reveal the effect of grain structure. It was observed that FSP samples, depending on their grain size, are at least 3–6 times more resistant than the base material against cavitation erosion. The improvement in cavitation erosion resistance is attributed to smaller grain structure, lower fraction of twin boundaries, and favorable crystallographic orientation of grains in FSP samples. The finer the grain size, the more cavitation erosion resistance was achieved. Moreover, the microstructures of eroded surfaces were studied using a scanning electron microscope equipped with EBSD, and an atomic force microscope. The mechanisms controlling the cavitation erosion damage in friction stir processed AISI 316L are also discussed.

  14. Enhancing Corrosion and Wear Resistance of AA6061 by Friction Stir Processing with Fe78Si₉B13 Glass Particles.

    Science.gov (United States)

    Guo, Lingyu; Liu, Yan; Shen, Kechang; Song, Chaoqun; Yang, Min; Kim, Kibuem; Wang, Weimin

    2015-08-07

    The AA6061-T6 aluminum alloy samples including annealed Fe 78 Si₉B 13 particles were prepared by friction stir processing (FSP) and investigated by various techniques. The Fe 78 Si₉B 13 -reinforced particles are uniformly dispersed in the aluminum alloy matrix. The XRD results indicated that the lattice parameter of α-Al increases and the preferred orientation factors F of (200) plane of α-Al reduces after friction stir processing. The coefficient of thermal expansion (CTE) for FSP samples increases at first with the temperature but then decreases as the temperature further increased, which can be explained by the dissolving of Mg and Si from β phase and Fe 78 Si₉B 13 particles. The corrosion and wear resistance of FSP samples have been improved compared with that of base metal, which can be attributed to the reduction of grain size and the CTE mismatch between the base metal and reinforced particles by FSP, and the lubrication effect of Fe 78 Si₉B 13 particles also plays a role in improving wear resistance. In particular, the FSP sample with reinforced particles in amorphous state exhibited superior corrosion and wear resistance due to the unique metastable structure.

  15. Fabrication of Surface Level Cu/Si Cp Nano composites by Friction Stir Processing Route

    International Nuclear Information System (INIS)

    Srinivasan, R. C.; Karunanithi, M.

    2015-01-01

    Friction stir processing (FSP) technique has been successfully employed as low energy consumption route to prepare copper based surface level nano composites reinforced with nano sized silicon carbide particles (Si Cp). The effect of FSP parameters such as tool rotational speed, processing speed, and tool tilt angle on microstructure and microhardness was investigated. Single pass FSP was performed based on Box-Behnken design at three factors in three levels. A cluster of blind holes 2 mm in diameter and 3 mm in depth was used as particulate deposition technique in order to reduce the agglomeration problem during composite fabrication. K-type thermocouples were used to measure temperature histories during FSP. The results suggest that the heat generation during FSP plays a significant role in deciding the microstructure and microhardness of the surface composites. Microstructural observations revealed a uniform dispersion of nano sized Si Cp without any agglomeration problem and well bonded with copper matrix at different process parameter combinations. X-ray diffraction study shows that no intermetallic compound was produced after processing. The microhardness of nano composites was remarkably enhanced and about 95% more than that of copper matrix

  16. ColorFull: a C++ library for calculations in SU(Nc) color space

    Energy Technology Data Exchange (ETDEWEB)

    Sjoedahl, Malin [Lund University, Department of Astronomy and Theoretical Physics, Lund (Sweden)

    2015-05-15

    ColorFull, a C++ package for treating QCD color structure, is presented. ColorFull, which utilizes the trace basis approach, is intended for interfacing with event generators, but can also be used as a stand-alone package for squaring QCD amplitudes, calculating interferences, and describing the effect of gluon emission and gluon exchange. (orig.)

  17. RTNS-II operations guidebook

    International Nuclear Information System (INIS)

    Heikkinen, D.W.

    1985-01-01

    This guidebook is intended to provide training criteria, procedures and guidelines for operation of the RTNS-II neutron sources and ancilliary equipment. Use of this document requires full knowledge of the RTNS-II Facility Safety Procedure (FSP) and any Operational Safety Procedures (OSP) in effect. The RTNS-II FSP defines the hazards which may be encountered at RTNS-II and defines the procedures which must be followed in performing any task including operations. The purpose of this document is to provide a central source of detailed information concerning systems and equipment used in operating the RTNS-II neutron sources on a day-to-day basis. All members of the Operations Group are expected to be familiar with its contents. It is also intended to be used in training new members of the Operations Group

  18. Countable Fuzzy Topological Space and Countable Fuzzy Topological Vector Space

    Directory of Open Access Journals (Sweden)

    Apu Kumar Saha

    2015-06-01

    Full Text Available This paper deals with countable fuzzy topological spaces, a generalization of the notion of fuzzy topological spaces. A collection of fuzzy sets F on a universe X forms a countable fuzzy topology if in the definition of a fuzzy topology, the condition of arbitrary supremum is relaxed to countable supremum. In this generalized fuzzy structure, the continuity of fuzzy functions and some other related properties are studied. Also the class of countable fuzzy topological vector spaces as a generalization of the class of fuzzy topological vector spaces has been introduced and investigated.

  19. Microstructure and optical appearance of anodized friction stir processed Al - Metal oxide surface composites

    DEFF Research Database (Denmark)

    Gudla, Visweswara Chakravarthy; Jensen, Flemming; Bordo, Kirill

    2014-01-01

    Multiple-pass friction stir processing (FSP) was employed to impregnate Ti, Y and Ce oxide powders into the surface of an Aluminium alloy. The FSP processed surface composite was subsequently anodized with an aim to develop optical effects in the anodized layer owing to the presence of incorporated...... oxide particles which will influence the scattering of light. This paper presents the investigations on relation between microstructure of the FSP zone and optical appearance of the anodized layer due to incorporation of metal oxide particles and modification of the oxide particles due to the anodizing...

  20. Process Design for Size-Controlled Flame Spray Synthesis of Li4Ti5O12 and Electrochemical Performance

    Directory of Open Access Journals (Sweden)

    Waser Oliver

    2017-03-01

    Full Text Available Inexpensive synthesis of electroceramic materials is required for efficient energy storage. Here the design of a scalable process, flame spray pyrolysis (FSP, for synthesis of size-controlled nanomaterials is investigated focusing on understanding the role of air entrainment (AE during their aerosol synthesis with emphasis on battery materials. The AE into the enclosed FSP reactor is analysed quantitatively by computational fluid dynamics (CFD and calculated temperatures are verified by Fourier transform infrared spectroscopy (FTIR. Various Li4Ti5O12 (LTO particle compositions are made and characterized by N2 adsorption, electron microscopy and X-ray diffraction while the electrochemical performance of LTO is tested at various charging rates. Increasing AE decreases recirculation in the enclosing tube leading to lower reactor temperatures and particle concentrations by air dilution as well as shorter and narrower residence time distributions. As a result, particle growth by coagulation - coalescence decreases leading to smaller primary particles that are mostly pure LTO exhibiting high C-rate performance with more than 120 mAh/g galvanostatic specific charge at 40C, outperforming commercial LTO. The effect of AE on FSP-made particle characteristics is demonstrated also in combustion synthesis of LiFePO4 and ZrO2.

  1. Gender and Space: Analysis of Factors Conditioning Equity in the Public Space

    Directory of Open Access Journals (Sweden)

    Pablo Paramo Bernal

    2011-01-01

    Full Text Available This article discusses gender research in urban public space through three different perspectives: the social representations and differentiated uses of space, the division of roles in public and private spaces, and urban planning of public space. The paper gathers and analyses some studies that complement the state of art and literature on women and space giving evidence on how women have been segregated from public space and are victim of gender inequalities. Public space does not exist absolutely nor gender; instead both are socially constructed by social order and reproduced by social practices. Finally, some suggestions for urban planning and research are given in order to respond women’s needs in public space.

  2. Test Results From a Pair of 1-kWe Dual-Opposed Free-Piston Stirling Power Convertors Integrated With a Pumped NaK Loop

    Science.gov (United States)

    Geng, Steven M.; Briggs, Maxwell H.; Penswick, L. Barry; Pearson, J. Boise; Godfroy, Thomas J.

    2011-01-01

    As a step towards development of Stirling power conversion for potential use in Fission Surface Power (FSP) systems, a pair of commercially available 1-kW-class free-piston Stirling convertors were modified to operate with a NaK (sodium (Na) and potassium (K)) liquid metal pumped loop for thermal energy input. This was the first-ever attempt at powering a free-piston Stirling engine with a pumped liquid metal heat source and is a major FSP project milestone towards demonstrating technical feasibility. The convertors were successfully tested at the Marshall Space Flight Center (MSFC) from June 6 through July 14, 2009. The convertors were operated for a total test time of 66 hr and 16 min. The tests included (a) performance mapping the convertors over various hot- and cold-end temperatures, piston amplitudes, and NaK flow rates and (b) transient test conditions to simulate various startup (i.e., low-, medium-, and high-temperature startups) and fault scenarios (i.e., loss of heat source, loss of NaK pump, convertor stall, etc.). This report documents the results of this testing

  3. $L$-Topological Spaces

    Directory of Open Access Journals (Sweden)

    Ali Bajravani

    2018-04-01

    Full Text Available ‎By substituting the usual notion of open sets in a topological space $X$ with a suitable collection of maps from $X$ to a frame $L$, we introduce the notion of L-topological spaces. Then, we proceed to study the classical notions and properties of usual topological spaces to the newly defined mathematical notion. Our emphasis would be concentrated on the well understood classical connectedness, quotient and compactness notions, where we prove the Thychonoff's theorem and connectedness property for ultra product of $L$-compact and $L$-connected topological spaces, respectively.

  4. Reference reactor module for NASA's lunar surface fission power system

    International Nuclear Information System (INIS)

    Poston, David I.; Kapernick, Richard J.; Dixon, David D.; Werner, James; Qualls, Louis; Radel, Ross

    2009-01-01

    Surface fission power systems on the Moon and Mars may provide the first US application of fission reactor technology in space since 1965. The Affordable Fission Surface Power System (AFSPS) study was completed by NASA/DOE to determine the cost of a modest performance, low-technical risk surface power system. The AFSPS concept is now being further developed within the Fission Surface Power (FSP) Project, which is a near-term technology program to demonstrate system-level TRL-6 by 2013. This paper describes the reference FSP reactor module concept, which is designed to provide a net power of 40 kWe for 8 years on the lunar surface; note, the system has been designed with technologies that are fully compatible with a Martian surface application. The reactor concept uses stainless-steel based. UO 2 -fueled, pumped-NaK fission reactor coupled to free-piston Stirling converters. The reactor shielding approach utilizes both in-situ and launched shielding to keep the dose to astronauts much lower than the natural background radiation on the lunar surface. The ultimate goal of this work is to provide a 'workhorse' power system that NASA can utilize in near-term and future Lunar and Martian mission architectures, with the eventual capability to evolve to very high power, low mass systems, for either surface, deep space, and/or orbital missions.

  5. Reference reactor module for NASA's lunar surface fission power system

    Energy Technology Data Exchange (ETDEWEB)

    Poston, David I [Los Alamos National Laboratory; Kapernick, Richard J [Los Alamos National Laboratory; Dixon, David D [Los Alamos National Laboratory; Werner, James [INL; Qualls, Louis [ORNL; Radel, Ross [SNL

    2009-01-01

    Surface fission power systems on the Moon and Mars may provide the first US application of fission reactor technology in space since 1965. The Affordable Fission Surface Power System (AFSPS) study was completed by NASA/DOE to determine the cost of a modest performance, low-technical risk surface power system. The AFSPS concept is now being further developed within the Fission Surface Power (FSP) Project, which is a near-term technology program to demonstrate system-level TRL-6 by 2013. This paper describes the reference FSP reactor module concept, which is designed to provide a net power of 40 kWe for 8 years on the lunar surface; note, the system has been designed with technologies that are fully compatible with a Martian surface application. The reactor concept uses stainless-steel based. UO{sub 2}-fueled, pumped-NaK fission reactor coupled to free-piston Stirling converters. The reactor shielding approach utilizes both in-situ and launched shielding to keep the dose to astronauts much lower than the natural background radiation on the lunar surface. The ultimate goal of this work is to provide a 'workhorse' power system that NASA can utilize in near-term and future Lunar and Martian mission architectures, with the eventual capability to evolve to very high power, low mass systems, for either surface, deep space, and/or orbital missions.

  6. Numerical simulation of temperature distribution using finite difference equations and estimation of the grain size during friction stir processing

    International Nuclear Information System (INIS)

    Arora, H.S.; Singh, H.; Dhindaw, B.K.

    2012-01-01

    Highlights: ► Magnesium alloy AE42 was friction stir processed under different cooling conditions. ► Heat flow model was developed using finite difference heat equations. ► Generalized MATLAB code was developed for solving heat flow model. ► Regression equation for estimation of grain size was developed. - Abstract: The present investigation is aimed at developing a heat flow model to simulate temperature history during friction stir processing (FSP). A new approach of developing implicit form of finite difference heat equations solved using MATLAB code was used. A magnesium based alloy AE42 was friction stir processed (FSPed) at different FSP parameters and cooling conditions. Temperature history was continuously recorded in the nugget zone during FSP using data acquisition system and k type thermocouples. The developed code was validated at different FSP parameters and cooling conditions during FSP experimentation. The temperature history at different locations in the nugget zone at different instants of time was further utilized for the estimation of grain growth rate and final average grain size of the FSPed specimen. A regression equation relating the final grain size, maximum temperature during FSP and the cooling rate was developed. The metallurgical characterization was done using optical microscopy, SEM, and FIB-SIM analysis. The simulated temperature profiles and final average grain size were found to be in good agreement with the experimental results. The presence of fine precipitate particles generated in situ in the investigated magnesium alloy also contributed in the evolution of fine grain structure through Zener pining effect at the grain boundaries.

  7. Flame spray pyrolysis synthesis and aerosol deposition of nanoparticle films

    DEFF Research Database (Denmark)

    Tricoli, Antonio; Elmøe, Tobias Dokkedal

    2012-01-01

    The assembly of nanoparticle films by flame spray pyrolysis (FSP) synthesis and deposition on temperature‐controlled substrates (323–723 K) was investigated for several application‐relevant conditions. An exemplary SnO2 nanoparticle aerosol was generated by FSP and its properties (e.g., particle...

  8. The fusion protein signal-peptide-coding region of canine distemper virus: a useful tool for phylogenetic reconstruction and lineage identification.

    Science.gov (United States)

    Sarute, Nicolás; Calderón, Marina Gallo; Pérez, Ruben; La Torre, José; Hernández, Martín; Francia, Lourdes; Panzera, Yanina

    2013-01-01

    Canine distemper virus (CDV; Paramyxoviridae, Morbillivirus) is the etiologic agent of a multisystemic infectious disease affecting all terrestrial carnivore families with high incidence and mortality in domestic dogs. Sequence analysis of the hemagglutinin (H) gene has been widely employed to characterize field strains, permitting the identification of nine CDV lineages worldwide. Recently, it has been established that the sequences of the fusion protein signal-peptide (Fsp) coding region are extremely variable, suggesting that analysis of its sequence might be useful for strain characterization studies. However, the divergence of Fsp sequences among worldwide strains and its phylogenetic resolution has not yet been evaluated. We constructed datasets containing the Fsp-coding region and H gene sequences of the same strains belonging to eight CDV lineages. Both datasets were used to evaluate their phylogenetic resolution. The phylogenetic analysis revealed that both datasets clustered the same strains into eight different branches, corresponding to CDV lineages. The inter-lineage amino acid divergence was fourfold greater for the Fsp peptide than for the H protein. The likelihood mapping revealed that both datasets display strong phylogenetic signals in the region of well-resolved topologies. These features indicate that Fsp-coding region sequence analysis is suitable for evolutionary studies as it allows for straightforward identification of CDV lineages.

  9. Integral-Type Operators from Bloch-Type Spaces to QK Spaces

    Directory of Open Access Journals (Sweden)

    Stevo Stević

    2011-01-01

    Full Text Available The boundedness and compactness of the integral-type operator Iφ,g(nf(z=∫0zf(n(φ(ζg(ζdζ, where n∈N0, φ is a holomorphic self-map of the unit disk D, and g is a holomorphic function on D, from α-Bloch spaces to QK spaces are characterized.

  10. DNA types of aspermic Fasciola species in Japan.

    Science.gov (United States)

    Ichikawa, Madoka; Iwata, Noriyuki; Itagaki, Tadashi

    2010-10-01

    In order to reveal DNA types of aspermic Fasciola forms in Japan, Fasciola specimens obtained from eight prefectures that had not been previously reported were analyzed for DNA of ribosomal internal transcribed spacer 1 (ITS1) and mitochondrial NADH dehydrogenase 1 (ND1) gene. Five combinations in DNA types of both ITS1 and ND1 were revealed from the results of this study and previous studies. The DNA type Fsp2, which is identical to that of F. gigantica in both ITS1 and ND1, was the most predominant in Japan, followed by Fsp1, which is the same DNA type as that of F. hepatica. Fasciola forms with Fsp1 mainly occurred in the northern region of Japan and those with Fsp2 were mainly in the western region. The founder effect related to migration of definitive host and susceptibility of intermediate host snail might play an important role in both geographical distribution and frequency of DNA types in Japanese Fasciola specimens.

  11. Modelling of peak temperature during friction stir processing of magnesium alloy AZ91

    Science.gov (United States)

    Vaira Vignesh, R.; Padmanaban, R.

    2018-02-01

    Friction stir processing (FSP) is a solid state processing technique with potential to modify the properties of the material through microstructural modification. The study of heat transfer in FSP aids in the identification of defects like flash, inadequate heat input, poor material flow and mixing etc. In this paper, transient temperature distribution during FSP of magnesium alloy AZ91 was simulated using finite element modelling. The numerical model results were validated using the experimental results from the published literature. The model was used to predict the peak temperature obtained during FSP for various process parameter combinations. The simulated peak temperature results were used to develop a statistical model. The effect of process parameters namely tool rotation speed, tool traverse speed and shoulder diameter of the tool on the peak temperature was investigated using the developed statistical model. It was found that peak temperature was directly proportional to tool rotation speed and shoulder diameter and inversely proportional to tool traverse speed.

  12. Texture analysis of a friction stir processed 6061-T6 aluminum alloy using neutron diffraction

    International Nuclear Information System (INIS)

    Woo, W.; Choo, H.; Brown, D.W.; Vogel, S.C.; Liaw, P.K.; Feng, Z.

    2006-01-01

    Time-of-flight neutron diffraction was used to investigate the texture changes in friction stir-processed (FSP) 6061-T6 aluminum alloy plates. Two different specimens were prepared with the purpose of separating the effects of frictional heating and severe plastic deformation on the changes of the preferred orientation in the as-received rolled plates: a plate processed with both stirring pin and tool shoulder, i.e., a regular FSP plate subjected to both severe plastic deformation and frictional heating (Case 1); and a plate processed only with the tool shoulder, i.e., subjected mainly to frictional heating (Case 2). The diffraction peak intensities provide insights into the texture variations at various locations across the centerline and through the thickness of the FSP plates. Comparison of the texture variations between Cases 1 and 2 clearly shows that the severe plastic deformation from the stirring pin affects the preferred orientation during the FSP, while heating alone from the tool shoulder has little effect

  13. Behind the scenes: how visual memory load biases selective attention during processing of visual streams.

    Science.gov (United States)

    Klaver, Peter; Talsma, Durk

    2013-11-01

    We recorded ERPs to investigate whether the visual memory load can bias visual selective attention. Participants memorized one or four letters and then responded to memory-matching letters presented in a relevant color while ignoring distractor letters or letters in an irrelevant color. Stimuli in the relevant color elicited larger frontal selection positivities (FSP) and occipital selection negativities (OSN) compared to irrelevant color stimuli. Only distractors elicited a larger FSP in the high than in the low memory load task. Memory load prolonged the OSN for all letters. Response mapping complexity was also modulated but did not affect the FSP and OSN. Together, the FSP data suggest that high memory load increased distractability. The OSN data suggest that memory load sustained attention to letters in a relevant color until working memory processing was completed, independently of whether the letters were in working memory or not. Copyright © 2013 Society for Psychophysiological Research.

  14. A comparison of [/sup 18/F]spiroperidol, [/sup 18/F]benperidol and [/sup 18/F] haloperidol kinetics in baboon brain

    International Nuclear Information System (INIS)

    Arnett, C.D.; Shiue, C.Y.; Wolf, A.P.; Fowler, J.S.; Logan, J.

    1984-01-01

    Neuroleptic receptor ligands, spiroperidol, benperidol and haloperidol were labeled with fluorine-18 by a nucleophilic aromatic substitution reaction of p-nitrobenzo-nitrile with /sup 18/F/sup -/ to produce p-[/sup 18/F]fluorobenzonitrile which was converted to p-[/sup 18/F]fluoro-y-chlorobutyrophenone and then alkylated with the appropriate amine to give [/sup 18/F]spiroperidol ([/sup 18/F]SP), [/sup 18/F]benperidol ([/sup 18/F]BEN), or [/sup 18/F]haloperidol ([/sup 18/F]HAL). Specific activity ranged from 3 to 6 Ci/μmol. Anesthetized baboons were injected with 6-17 mCi of [/sup 18/F]-labeled tracer. Kinetic curves (striatum and cerebellum) were obtained from PETT scans up to 4 hr with each drug; [/sup 18/F]SP was studied to 8 hr. [/sup 18/F]SP and [/sup 18/F]BEN exhibited similar kinetics in striatum, with radioactivity concentration plateauing by 30 min after injection and remaining constant for the remainder of the study. These two compounds cleared rapidly from the cerebellum. [/sup 18/F]HAL showed a much different kinetic pattern in the striatum. Although it reached a higher striatal concentration (≅0.07% per ml vs. ≅ 0.02% per ml for [/sup 18/F]SP or [/sup 18/F]BEN), a peak occurred at 30 min after injection, followed by a decline almost as rapid as that in the cerebellum. Plasma analyses for [/sup 18/F]SP showed > 90% unchanged drug up to 5 min and ≅ 30% metabolites at 20 min after injection. Pretreatment with (+)-butaclamol abolished the selective distribution of [/sup 18/F]SP to the striatum in the four animals studied. Both [/sup 18/F]SP and [/sup 18/F]BEN may be suitable for PETT studies of neuroleptic receptors, but the in vivo kinetics of these compounds are markedly different from their in vitro receptor binding kinetics

  15. Comparison of CHROMagar, polymerase chain reaction-restriction fragment length polymorphism, and polymerase chain reaction-fragment size for the identification of Candida species.

    Science.gov (United States)

    Jafari, Zahra; Motamedi, Marjan; Jalalizand, Nilufar; Shokoohi, Gholam R; Charsizadeh, Arezu; Mirhendi, Hossein

    2017-09-01

    The epidemiological alteration in the distribution of Candida species, as well as the significantly increasing trend of either intrinsic or acquired resistance of some of these fungi highlights the need for a reliable method for the identification of the species. Polymerase chain reaction (PCR) is one of the methods facilitating the quick and precise identification of Candida species. The aim of this study was to compare the efficiency of CHROMagar, PCR-restriction fragment length polymorphism (PCR-RFLP), and PCR-fragment size polymorphism (PCR-FSP) assays in the identification of Candida species to determine the benefits and limitations of these methods. This study was conducted on 107 Candida strains, including 20 standard strains and 87 clinical isolates. The identification of the isolates was accomplished by using CHROMagar as a conventional method. The PCR-RFLP assay was performed on the entire internal transcribed spacer (ITS) region of ribosomal DNA (rDNA), and the consequent enzymatic digestion was compared with PCR-FSP results in which ITS1 and ITS2 regions were separately PCR amplified. In both molecular assays, yeast identification was carried out through the specific electrophoretic profiles of the PCR products. According to the results, the utilization of CHROMagar resulted in the identification of 29 (33.3%) Candida isolates, while the PCR-RFLP and PCR-FSP facilitated the identification of 83 (95.4%) and 80 (91.9%) clinical isolates, respectively. The obtained concordances between CHROMagar and PCR-RFLP, between CHROMagar and PCR-FSP, as well as between PCR-RFLP and PCR-FSP were 0.23, 0.20, and 0.77, respectively. The recognition of the benefits and limitations of PCR methods allows for the selection of the most efficient technique for a fast and correct differentiation. The PCR-RFLP and PCR-FSP assays had satisfactory concordance. The PCR-FSP provides a rapid, technically simple, and cost-effective method for the identification of Candida species

  16. Antioxidant activity of free and bound compounds in quinoa (Chenopodium quinoa Willd.) seeds in comparison with durum wheat and emmer.

    Science.gov (United States)

    Laus, Maura N; Gagliardi, Anna; Soccio, Mario; Flagella, Zina; Pastore, Donato

    2012-11-01

    Antioxidant activity (AA) of quinoa (Chenopodium quinoa Willd.) seeds, as well as of durum wheat (Triticum turgidum L. ssp. durum Desf.) and of emmer (T. turgidum L. ssp. dicoccum Schübler) grains, was evaluated by studying hydrophilic (H), lipophilic (L), free-soluble (FSP) and insoluble-bound (IBP) phenolic extracts using the new lipoxygenase/4-nitroso-N,N-dimethylaniline (LOX/RNO) method, able to simultaneously detect different antioxidant mechanisms, as well as using the Oxygen Radical Absorbance Capacity (ORAC) and the Trolox Equivalent Antioxidant Capacity (TEAC) assays, which measure the scavenging activity against peroxyl and ABTS [2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulfonate)] radicals, respectively. The species under study were compared with respect to the sum of AA values of H, L and FSP extracts (AA(H+L+FSP)), containing freely solvent-soluble antioxidants, and AA values of IBP extracts (AA(IBP)), representing the phenolic fraction ester-linked to insoluble cell wall polymers. The LOX/RNO and ORAC methods measured in quinoa flour a remarkable AA(H+L+FSP) higher than durum wheat, although lower than emmer; according to the same assays, the IBP component of quinoa resulted less active than the durum wheat and emmer ones. The TEAC protocol also revealed a high AA(H+L+FSP) for quinoa. Interestingly, the ratio AA(H+L+FSP)/AA(H+L+FSP+IBP), as evaluated by the LOX/RNO and ORAC assays, resulted in quinoa higher than that of both durum wheat and emmer, and much higher than durum wheat, according to the TEAC protocol. This may suggest that antioxidants from quinoa seeds may be more readily accessible with respect to that of both the examined wheat species. Quinoa seeds may represent an excellent source of natural antioxidant compounds and, in particular, of the free-soluble antioxidant fraction. These compounds may improve nutritive and health-beneficial properties of quinoa-based gluten-free products, thus expanding interest for quinoa utilization from

  17. A Space Apart

    Directory of Open Access Journals (Sweden)

    Lisa Lynch

    2017-01-01

    Full Text Available This article examines how the preschool child is enabled to withdraw from the peer group and create a private, individual space within the institutional collective. The question under consideration is, “What factors are necessary to enable a child to create and maintain a withdrawal space in the preschool?” Data were collected through ethnographic fieldwork at two Montessori schools in the south of Sweden. Analysis of the results reveals that a child is enabled through a combination of two elements: a level of opportunity to create a space and a level of defense of a created space. These two factors are dependent on the teachers’ ability to correctly identify space creation, alongside their desire for the child’s space creation effort to be successful.

  18. Matrix transformation of Fibonacci band matrix on generalized $bv$-space and its dual spaces

    Directory of Open Access Journals (Sweden)

    Anupam Das

    2018-07-01

    Full Text Available In this paper we introduce a new sequence space $bv(\\hat{F}$ by using the Fibonacci band matrix $\\hat{F}.$ We also establish a few inclusion relations concerning this space and determine its $\\alpha-,\\beta-,\\gamma-$duals. Finally we characterize some matrix classes on the space $bv(\\hat{F}.$

  19. Remarks on G-Metric Spaces

    Directory of Open Access Journals (Sweden)

    Bessem Samet

    2013-01-01

    Full Text Available In 2005, Mustafa and Sims (2006 introduced and studied a new class of generalized metric spaces, which are called G-metric spaces, as a generalization of metric spaces. We establish some useful propositions to show that many fixed point theorems on (nonsymmetric G-metric spaces given recently by many authors follow directly from well-known theorems on metric spaces. Our technique can be easily extended to other results as shown in application.

  20. IMPACT OF SELECTED RURAL DEVELOPMENT PROGRAMMES ...

    African Journals Online (AJOL)

    Administrator

    development programmes in Ikwuano Local Government Area of Abia State, Nigeria. The area under study was .... The programme was later replaced by Family support Programme (FSP). FSP was almost the same with BLP ..... Assessed 15/12/05 2005. FOS. Federal Office of Statistics National Consumers Survey. 1985/86 ...

  1. Weighted Composition Operators from Hardy Spaces into Logarithmic Bloch Spaces

    Directory of Open Access Journals (Sweden)

    Flavia Colonna

    2012-01-01

    Full Text Available The logarithmic Bloch space Blog⁡ is the Banach space of analytic functions on the open unit disk 𝔻 whose elements f satisfy the condition ∥f∥=sup⁡z∈𝔻(1-|z|2log⁡  (2/(1-|z|2|f'(z|<∞. In this work we characterize the bounded and the compact weighted composition operators from the Hardy space Hp (with 1≤p≤∞ into the logarithmic Bloch space. We also provide boundedness and compactness criteria for the weighted composition operator mapping Hp into the little logarithmic Bloch space defined as the subspace of Blog⁡ consisting of the functions f such that lim⁡|z|→1(1-|z|2log⁡  (2/(1-|z|2|f'(z|=0.

  2. Integral type operators from normal weighted Bloch spaces to QT,S spaces

    Directory of Open Access Journals (Sweden)

    Yongyi GU

    2016-08-01

    Full Text Available Operator theory is an important research content of the analytic function space theory. The discussion of simultaneous operator and function space is an effective way to study operator and function space. Assuming that  is an analytic self map on the unit disk Δ, and the normal weighted bloch space μ-B is a Banach space on the unit disk Δ, defining a composition operator C∶C(f=f on μ-B for all f∈μ-B, integral type operator JhC and CJh are generalized by integral operator and composition operator. The boundeness and compactness of the integral type operator JhC acting from normal weighted Bloch spaces to QT,S spaces are discussed, as well as the boundeness of the integral type operators CJh acting from normal weighted Bloch spaces to QT,S spaces. The related sufficient and necessary conditions are given.

  3. Weighted Differentiation Composition Operator from Logarithmic Bloch Spaces to Zygmund-Type Spaces

    Directory of Open Access Journals (Sweden)

    Huiying Qu

    2014-01-01

    Full Text Available Let H( denote the space of all holomorphic functions on the unit disk of ℂ, u∈H( and let  n be a positive integer, φ a holomorphic self-map of , and μ a weight. In this paper, we investigate the boundedness and compactness of a weighted differentiation composition operator φ,unf(z=u(zf(n(φ(z,f∈H(, from the logarithmic Bloch spaces to the Zygmund-type spaces.

  4. Cdc42 promotes host defenses against fatal infection

    DEFF Research Database (Denmark)

    Lee, Keunwook; Boyd, Kelli L; Parekh, Diptiben V

    2013-01-01

    attempted to specifically delete it in these cells by crossing the Cdc42(fl/fl) mouse with a FSP-1 cre mouse, which is thought to mediate recombination exclusively in fibroblasts. Surprisingly, the FSP-1cre;Cdc42(fl/fl) mice died at 3 weeks of age due to overwhelming suppurative upper airway infections...... showed that in addition to fibroblasts, the FSP-1 cre deleted Cdc42 very efficiently in all leukocytes. Thus, by using this non-specific cre mouse we inadvertently demonstrated the importance of Cdc42 in host protection from lethal infections and suggest a critical role for this small GTPase in innate...

  5. Unified theory of fermion pair to boson mappings in full and truncated spaces

    International Nuclear Information System (INIS)

    Ginocchio, J.N.; Johnson, C.W.

    1995-01-01

    After a brief review of various mappings of fermion pairs to bosons, we rigorously derive a general approach. Following the methods of Marumori and Otsuka, Arima, and Iachello, our approach begins with mapping states and constructs boson representations that preserve fermion matrix elements. In several cases these representations factor into finite, Hermitian boson images times a projection or norm operator that embodies the Pauli principle. We pay particular attention to truncated boson spaces, and describe general methods for constructing Hermitian and approximately finite boson image Hamiltonians. This method is akin to that of Otsuka, Arima, and Iachello introduced in connection with the interacting boson model, but is more rigorous, general, and systematic

  6. Friction Stir Processing of Copper-Coated SiC Particulate-Reinforced Aluminum Matrix Composite

    Directory of Open Access Journals (Sweden)

    Chih-Wei Huang

    2018-04-01

    Full Text Available In the present work, we proposed a novel friction stir processing (FSP to produce a locally reinforced aluminum matrix composite (AMC by stirring copper-coated SiC particulate reinforcement into Al6061 alloy matrix. Electroless-plating process was applied to deposit the copper surface coating on the SiC particulate reinforcement for the purpose of improving the interfacial adhesion between SiC particles and Al matrix. The core-shell SiC structure provides a layer for the atomic diffusion between aluminum and copper to enhance the cohesion between reinforcing particles and matrix on one hand, the dispersion of fine copper in the Al matrix during FSP provides further dispersive strengthening and solid solution strengthening, on the other hand. Hardness distribution and tensile results across the stir zone validated the novel concept in improving the mechanical properties of AMC that was realized via FSP. Optical microscope (OM and Transmission Electron Microscopy (TEM investigations were conducted to investigate the microstructure. Energy dispersive spectrometer (EDS, electron probe micro-analyzer (EPMA, and X-ray diffraction (XRD were explored to analyze the atomic inter-diffusion and the formation of intermetallic at interface. The possible strengthening mechanisms of the AMC containing Cu-coated SiC particulate reinforcement were interpreted. The concept of strengthening developed in this work may open a new way of fabricating of particulate reinforced metal matrix composites.

  7. Rectangular Full Packed Format for Cholesky's Algorithm: Factorization, Solution, and Inversion

    DEFF Research Database (Denmark)

    Gustavson, Fred G.; Wasniewski, Jerzy; Dongarra, Jack J

    2010-01-01

    of the storage space but provide high performance via the use of Level 3 BLAS. Standard packed format arrays fully utilize storage (array space) but provide low performance as there is no Level 3 packed BLAS. We combine the good features of packed and full storage using RFPF to obtain high performance via using...... Level 3 BLAS as RFPF is a standard full-format representation. Also, RFPF requires exactly the same minimal storage as packed the format. Each LAPACK full and/or packed triangular, symmetric, and Hermitian routine becomes a single new RFPF routine based on eight possible data layouts of RFPF. This new...... RFPF routine usually consists of two calls to the corresponding LAPACK full-format routine and two calls to Level 3 BLAS routines. This means no new software is required. As examples, we present LAPACK routines for Cholesky factorization, Cholesky solution, and Cholesky inverse computation in RFPF...

  8. Space weather in the EU’s FP7 Space Theme

    Directory of Open Access Journals (Sweden)

    Chiarini Paola

    2013-11-01

    Full Text Available Technological infrastructures in space and on ground provide services on which modern society and economies rely. Space weather related research is funded under the 7th Framework Programme for Research and Innovation (FP7 of the European Union in response to the need of protecting such critical infrastructures from the damage which could be caused by extreme space weather events. The calls for proposals published under the topic “Security of space assets from space weather events” of the FP7 Space Theme aimed to improve forecasts and predictions of disruptive space weather events as well as identify best practices to limit the impacts on space- and ground-based infrastructures and their data provision. Space weather related work was also funded under the topic “Exploitation of space science and exploration data”, which aims to add value to space missions and Earth-based observations by contributing to the effective scientific exploitation of collected data. Since 2007 a total of 20 collaborative projects have been funded, covering a variety of physical phenomena associated with space weather, from ionospheric disturbances and scintillation, to geomagnetically induced currents at Earth’s surface, to coronal mass ejections and solar energetic particles. This article provides an overview of the funded projects, touching upon some results and referring to specific websites for a more exhaustive description of the projects’ outcomes.

  9. Two distinct sensing pathways allow recognition of Klebsiella pneumoniae by Dictyostelium amoebae.

    Science.gov (United States)

    Lima, Wanessa C; Balestrino, Damien; Forestier, Christiane; Cosson, Pierre

    2014-03-01

    Recognition of bacteria by metazoans is mediated by receptors that recognize different types of microorganisms and elicit specific cellular responses. The soil amoebae Dictyostelium discoideum feeds upon a variable mixture of environmental bacteria, and it is expected to recognize and adapt to various food sources. To date, however, no bacteria-sensing mechanisms have been described. In this study, we isolated a Dictyostelium mutant (fspA KO) unable to grow in the presence of non-capsulated Klebsiella pneumoniae bacteria, but growing as efficiently as wild-type cells in the presence of other bacteria, such as Bacillus subtilis. fspA KO cells were also unable to respond to K. pneumoniae and more specifically to bacterially secreted folate in a chemokinetic assay, while they responded readily to B. subtilis. Remarkably, both WT and fspA KO cells were able to grow in the presence of capsulated LM21 K. pneumoniae, and responded to purified capsule, indicating that capsule recognition may represent an alternative, FspA-independent mechanism for K. pneumoniae sensing. When LM21 capsule synthesis genes were deleted, growth and chemokinetic response were lost for fspA KO cells, but not for WT cells. Altogether, these results indicate that Dictyostelium amoebae use specific recognition mechanisms to respond to different K. pneumoniae elements. © 2013 John Wiley & Sons Ltd.

  10. Modification of vacuum plasma sprayed tungsten coating on reduced activation ferritic/martensitic steels by friction stir processing

    International Nuclear Information System (INIS)

    Tanigawa, Hiroyasu; Ozawa, Kazumi; Morisada, Yoshiaki; Noh, Sanghoon; Fujii, Hidetoshi

    2015-01-01

    Highlights: • Friction stir processing (FSP) was applied on vacuum plasma spray (VPS) W to improve its low thermal conductivity and weakness due to high porosity. • FSP can achieve significant improvement both in mechanical and thermal properties of VPS-W coating. • It was indicated that the double pass FSP at 600 rpm/50 mm/min/2 ton on VPS-W show the most dense microstructure and hardest mechanical property. • Hardness test over FSPed VPS-W layer revealed that the hardness of W becomes higher than that of bulk W. • The thermal conductivity of double pass FSPed VPS-W was about 80% of bulk W at 200 °C, and it becomes equivalent to that of bulk W over 800 °C. - Abstract: Tungsten (W) is the primary candidate material as a plasma facing material in fusion devices, as for its high melting temperature, good thermal conductivity and low sputtering rate, and vacuum plasma spray (VPS) technique is preferred as it is applicable for large area without brittle interlayer, but the thermal conductivity of W layer is very poor, and easy to detach, mainly caused by its porous structure. W Friction stir processing (FSP) was applied on VPS-W to improve these poor properties, and it was suggested that FSP can contribute to significant improvement in both mechanical and thermal properties of the VPS-W coating.

  11. Processing, microstructure and mechanical properties of nickel particles embedded aluminium matrix composite

    International Nuclear Information System (INIS)

    Yadav, Devinder; Bauri, Ranjit

    2011-01-01

    Research highlights: → Al-Ni particle composite was successfully processed by FSP. → No harmful intermetallics formed. → The composite showed a 3 fold increase in yield strength with high ductility. → FSP also lead to a refined recrystallized grain structure. → A continuous type dynamic recrystallization process seems to be working during FSP. - Abstract: Nickel particles were embedded into an Al matrix by friction stir processing (FSP) to produce metal particle reinforced composite. FSP resulted in uniform dispersion of nickel particles with excellent interfacial bonding with the Al matrix and also lead to significant grain refinement of the matrix. The novelty of the process is that the composite was processed in one step without any pretreatment being given to the constituents and no harmful intermetallic formed. The novel feature of the composite is that it shows a three fold increase in the yield strength while appreciable amount of ductility is retained. The hardness also improved significantly. The fracture surface showed a ductile failure mode and also revealed the superior bonding between the particles and the matrix. Electron backscattered diffraction (EBSD) and transmission electron microscopy analysis revealed a dynamically recrystallized equiaxed microstructure. A gradual increase in misorientation from sub-grain to high-angle boundaries is observed from EBSD analysis pointing towards a continuous type dynamic recrystallization mechanism.

  12. Interpolation in Spaces of Functions

    Directory of Open Access Journals (Sweden)

    K. Mosaleheh

    2006-03-01

    Full Text Available In this paper we consider the interpolation by certain functions such as trigonometric and rational functions for finite dimensional linear space X. Then we extend this to infinite dimensional linear spaces

  13. Compliance evaluation of removable space maintainer or space regainer usage

    Directory of Open Access Journals (Sweden)

    Revanti Ramadhani

    2018-01-01

    Full Text Available Premature loss could cause a problem with the tooth arrangement or the dental arch size. A space left by the primary tooth loss could cause migration of the adjacent teeth. As a result, space will be narrowed and undermined the eruption of the permanent teeth. The success of the space maintainer or space regainer usage due to the premature loss marked by space for the replacement of the permanent teeth. The purpose of this research was to evaluate the compliance of children in wearing a space maintainer or space regainer after insertion at Pedodontics Installation of Faculty of Dentistry Universitas Padjadjaran Dental Hospital, Bandung, Indonesia. The research method was descriptive survey technique. The sample consisted of 30 patients selected using the total sampling technique. Data were obtained with a questionnaire and statistically analyzed. The results showed that majority of the children uses the removable space maintainer or the space regainer daily was only about 23,3% overall. Most of the children only use the removable space maintainer or the space regainer for sometimes. The research concluded that the low rate of pedodontic patients compliance at Pedodontics Installation of Faculty of Dentistry Universitas Padjadjaran Dental Hospital in the usage of the removable space maintainer or the space regainer was usually caused by pain or discomfort. This fact was evidence of a low awareness of parents in preventing malocclusion to their children.

  14. Cyber space bullying

    Directory of Open Access Journals (Sweden)

    Popović-Ćitić Branislava

    2009-01-01

    Full Text Available Cyber space bullying is a relatively new phenomenon that has received increased attention by scientists, researchers and practitioners in recent years. It is usually defined as an intentionally and repeatedly expression of aggression towards other people through information and communication technologies. Cyber space bullying is characterized by all the primary characteristics of traditional bullying and some specifics ones that clearly differ it from other forms of bullying. In addition to the analysis of characteristics and specifics of cyber space bullying, the paper describes the basic forms of cyber space bullying (flaming, harassment, denigration, impersonation, outing, trickery, exclusion, stalking and happy slapping, as well as, the types of cyber space bullies (vengeful angel, power-hungry, revenge of the nerd, mean girls and inadvertent. The main goal of this paper is to provide initial theoretical guidelines for designing future empirical research on the complex phenomenon of cyber space bullying.

  15. Julio Mario Santodomingo Library’s Public Space

    Directory of Open Access Journals (Sweden)

    Diana Wiesner

    2014-04-01

    Full Text Available Public Libraries located in Bogotá the capital of the Republic of at 2650 m above sea level made a good contribution to public space in the northen districts with limited public and green spaces. More than a library public space offers possibilities to young people to have a nice green and permeable space full of native nature. The ultimate aim of the design is to contribute as a proposal in introducing biodiversity giving value to the spontaneous and wild forgotten species as well as recicled materials.

  16. Algorithm for Primary Full-thickness Skin Grafting in Pediatric Hand Burns

    Directory of Open Access Journals (Sweden)

    Yang Seo Park

    2012-09-01

    Full Text Available Background Pediatric hand burns are a difficult problem because they lead to serious handdeformities with functional impairment due to rapid growth during childhood. Therefore,adequate management is required beginning in the acute stage. Our study aims to establishsurgical guidelines for a primary full-thickness skin graft (FTSG in pediatric hand burns, basedon long-term observation periods and existing studies.Methods From January 2000 to May 2011, 210 patients underwent primary FTSG. Weretrospectively studied the clinical course and treatment outcomes based on the patients’medical records. The patients’ demographics, age, sex, injury site of the fingers, presence ofweb space involvement, the incidence of postoperative late deformities, and the duration ofrevision were critically analyzed.Results The mean age of the patients was 24.4 months (range, 8 to 94 months, consisting of141 males and 69 females. The overall observation period was 6.9 years (range, 1 to 11 yearson average. At the time of the burn, 56 cases were to a single finger, 73 to two fingers, 45 tothree fingers, and 22 to more than three. Among these cases, 70 were burns that included aweb space (33.3%. During the observation, 25 cases underwent corrective operations withan average period of 40.6 months.Conclusions In the volar area, primary full-thickness skin grafting can be a good indicationfor an isolated injured finger, excluding the web spaces, and injuries of less than three fingersincluding the web spaces. Also, in the dorsal area, full-thickness skin grafting can be a goodindication. However, if the donor site is insufficient and the wound is large, split-thicknessskin grafting can be considered.

  17. Ffuzz: Towards full system high coverage fuzz testing on binary executables.

    Directory of Open Access Journals (Sweden)

    Bin Zhang

    Full Text Available Bugs and vulnerabilities in binary executables threaten cyber security. Current discovery methods, like fuzz testing, symbolic execution and manual analysis, both have advantages and disadvantages when exercising the deeper code area in binary executables to find more bugs. In this paper, we designed and implemented a hybrid automatic bug finding tool-Ffuzz-on top of fuzz testing and selective symbolic execution. It targets full system software stack testing including both the user space and kernel space. Combining these two mainstream techniques enables us to achieve higher coverage and avoid getting stuck both in fuzz testing and symbolic execution. We also proposed two key optimizations to improve the efficiency of full system testing. We evaluated the efficiency and effectiveness of our method on real-world binary software and 844 memory corruption vulnerable programs in the Juliet test suite. The results show that Ffuzz can discover software bugs in the full system software stack effectively and efficiently.

  18. Space Weather and Real-Time Monitoring

    Directory of Open Access Journals (Sweden)

    S Watari

    2009-04-01

    Full Text Available Recent advance of information and communications technology enables to collect a large amount of ground-based and space-based observation data in real-time. The real-time data realize nowcast of space weather. This paper reports a history of space weather by the International Space Environment Service (ISES in association with the International Geophysical Year (IGY and importance of real-time monitoring in space weather.

  19. Saturated fatty acid in the phospholipid monolayer contributes to the formation of large lipid droplets

    International Nuclear Information System (INIS)

    Arisawa, Kotoko; Mitsudome, Haruka; Yoshida, Konomi; Sugimoto, Shizuka; Ishikawa, Tomoko; Fujiwara, Yoko; Ichi, Ikuyo

    2016-01-01

    The degree of saturation of fatty acid chains in the bilayer membrane structure is known to control membrane fluidity and packing density. However, the significance of fatty acid composition in the monolayers of lipid droplets (LDs) has not been elucidated. In this study, we noted a relationship between the size of LDs and the fatty acid composition of the monolayer. To obtain large LDs, we generated NIH3T3 cells overexpressing fat-specific protein 27 (FSP27). This induced the fusion of LDs, resulting in larger LDs in FSP27-overexpressing cells compared with LDs in control cells. Moreover, the lipid extracts of LDs from FSP27-overexpressing cells reconstituted large-droplet emulsions in vitro, implying that the lipid properties of LDs might affect the size of LDs. FSP27-overexpressing cells had more saturated fatty acids in the phospholipid monolayer of the LDs compared with control cells. To further investigate the effects of the degree of phospholipid unsaturation on the size of LDs, we synthesized artificial emulsions of a lipid mixed with distearoylphosphatidylcholine (DSPC, diC18:0-PC) and with dioleoylphosphatidylcholine (DOPC, diC18:1n-9-PC) and compared the sizes of the resulting LDs. The emulsions prepared from saturated PC had larger droplets than those prepared from unsaturated PC. Our results suggest that saturated fatty acid chains in phospholipid monolayers might establish the form and/or stability of large LDs. - Highlights: • The lipid extracts of larger LDs from FSP27 cells reconstructed large-droplet emulsions. • Isolated LDs from FSP27 cells had more saturated fatty acids in the phospholipid monolayer compared with the control. • Saturated fatty acids in the phospholipid monolayer are a factor in the formation of large emulsions.

  20. Communicative Language Testing: Implications for Computer Based Language Testing in French for Specific Purposes

    Science.gov (United States)

    García Laborda, Jesús; López Santiago, Mercedes; Otero de Juan, Nuria; Álvarez Álvarez, Alfredo

    2014-01-01

    Current evolutions of language testing have led to integrating computers in FSP assessments both in oral and written communicative tasks. This paper deals with two main issues: learners' expectations about the types of questions in FSP computer based assessments and the relation with their own experience. This paper describes the experience of 23…

  1. Para-mixed linear spaces

    Directory of Open Access Journals (Sweden)

    Crasmareanu Mircea

    2017-12-01

    Full Text Available We consider the paracomplex version of the notion of mixed linear spaces introduced by M. Jurchescu in [4] by replacing the complex unit i with the paracomplex unit j, j2 = 1. The linear algebra of these spaces is studied with a special view towards their morphisms.

  2. Microstructural modification of pure Mg for improving mechanical and biocorrosion properties.

    Science.gov (United States)

    Ahmadkhaniha, D; Järvenpää, A; Jaskari, M; Sohi, M Heydarzadeh; Zarei-Hanzaki, A; Fedel, M; Deflorian, F; Karjalainen, L P

    2016-08-01

    In this study, the effect of microstructural modification on mechanical properties and biocorrosion resistance of pure Mg was investigated for tailoring a load-bearing orthopedic biodegradable implant material. This was performed utilizing the friction stir processing (FSP) in 1-3 passes to refine the grain size. Microstructure was examined in an optical microscope and scanning electron microscope with an electron backscatter diffraction unit. X-ray diffraction method was used to identify the texture. Mechanical properties were measured by microhardness and tensile testing. Electrochemical impedance spectroscopy was applied to evaluate corrosion behavior. The results indicate that even applying a single pass of FSP refined the grain size significantly. Increasing the number of FSP passes further refined the structure, increased the mechanical strength and intensified the dominating basal texture. The best combination of mechanical properties and corrosion resistance were achieved after three FSP passes. In this case, the yield strength was about six times higher than that of the as-cast Mg and the corrosion resistance was also improved compared to that in the as-cast condition. Copyright © 2016 Elsevier Ltd. All rights reserved.

  3. Impacts of friction stir processing on irradiation effects in vacuum-plasma-spray coated tungsten

    Energy Technology Data Exchange (ETDEWEB)

    Ozawa, Kazumi, E-mail: ozawa.kazumi@jaea.go.jp [Fusion Research and Development Directorate, Japan Atomic Energy Agency, 2-166 Obuchi-Omotedate, Rokkasho, Aomori 039-3212 (Japan); Tanigawa, Hiroyasu [Fusion Research and Development Directorate, Japan Atomic Energy Agency, 2-166 Obuchi-Omotedate, Rokkasho, Aomori 039-3212 (Japan); Morisada, Yoshiaki; Fujii, Hidetoshi [Joining and Welding Research Institute, Osaka University, 11-1 Mihogaoka, Ibaraki, Osaka 567-0047 (Japan)

    2015-10-15

    In order to examine the impacts of friction stir processing (FSP) on irradiation effects in vacuum-plasma-spray (VPS) coated tungsten (W), nano indentation hardness was evaluated of three kinds of W materials after self-ion-irradiation to 5.0–5.4 dpa at 500 and 800 °C. The VPS-FSP clearly got grains refined and isotropic compared to bulk-W and the as-VPS-W. Nano indentation hardness remains unchanged for the as-VPS-W and VPS-FSP × 2-W irradiated to 5.4 dpa at 500 °C and it decreased from 1 dpa at 800 °C, while typical irradiation induced hardening was observed for the bulk-W irradiated at 500 °C.

  4. Effect of Multipass Friction Stir Processing on Mechanical and Corrosion Behavior of 2507 Super Duplex Stainless Steel

    Science.gov (United States)

    Mishra, M. K.; Gunasekaran, G.; Rao, A. G.; Kashyap, B. P.; Prabhu, N.

    2017-02-01

    The microstructure, mechanical properties, and corrosion behavior of 2507 super duplex stainless steel after multipass friction stir processing (FSP) were examined. A significant refinement in grain size of both ferrite and austenite was observed in stir zone resulting in improved yield and tensile strength. Electrochemical impedance spectroscopy and anodic polarization studies in 3.5 wt.% NaCl solution showed nobler corrosion characteristics with increasing number of FSP passes. This was evident from the decrease in corrosion current density, decrease in passive current density, and increase in polarization resistance. Also, the decrease in density of defects, based on Mott-Schottky analysis, further confirms the improvement in corrosion resistance of 2507 super duplex stainless steel after multipass FSP.

  5. Soft ideal topological space and mixed fuzzy soft ideal topological space

    Directory of Open Access Journals (Sweden)

    Manash Borah

    2019-01-01

    Full Text Available In this paper we introduce fuzzy soft ideal and mixed fuzzy soft ideal topological spaces and some properties of this space. Also we introduce fuzzy soft $I$-open set, fuzzy soft $\\alpha$-$I$-open set, fuzzy soft pre-$I$-open set, fuzzy soft semi-$I$-open set and fuzzy soft $\\beta$-$I$-open set and discuss some of their properties.

  6. Learning Space Service Design

    Directory of Open Access Journals (Sweden)

    Elliot Felix

    2011-12-01

    Full Text Available Much progress has been made in creating informal learning spaces that incorporate technology and flexibly support a variety of activities. This progress has been principally in designing the right combination of furniture, technology, and space. However, colleges and universities do not design services within learning spaces with nearly the same level of sophistication or integration. Nor do they adequately assess their services. This paper calls for a focus on designing services to facilitate better learning experiences. It describes the fundamentals of service design practice, a selection of exemplary spaces, and the implications for design, budgeting, and staffing.

  7. Solar origins of space weather and space climate

    CERN Document Server

    Komm, Rudolf; Pevtsov, Alexei; Leibacher, John

    2014-01-01

    This topical issue is based on the presentations given at the 26th National Solar Observatory (NSO) Summer Workshop held at the National Solar Observatory/Sacramento Peak, New Mexico, USA from 30 April to 4 May 2012. This unique forum brought together experts in different areas of solar and space physics to help in developing a full picture of the origin of solar phenomena that affect Earth’s technological systems.  The articles include theory, model, and observation research on the origin of the solar activity and its cycle, as well as a discussion on how to incorporate the research into space-weather forecasting tools.  This volume is aimed at graduate students and researchers active in solar physics and space science.  Previously published in Solar Physics, Vol. 289/2, 2014.

  8. An Adaptive Regulator for Space Teleoperation System in Task Space

    Directory of Open Access Journals (Sweden)

    Chao Ge

    2014-01-01

    Full Text Available The problem of the gravity information which can not be obtained in advance for bilateral teleoperation is studied. In outer space exploration, the gravity term changes with the position changing of the slave manipulator. So it is necessary to design an adaptive regulator controller to compensate for the unknown gravity signal. Moreover, to get a more accurate position tracking performance, the controller is designed in the task space instead of the joint space. Additionally, the time delay considered in this paper is not only time varying but also unsymmetrical. Finally, simulations are presented to show the effectiveness of the proposed approach.

  9. Sobolev Spaces on Locally Compact Abelian Groups: Compact Embeddings and Local Spaces

    Directory of Open Access Journals (Sweden)

    Przemysław Górka

    2014-01-01

    Full Text Available We continue our research on Sobolev spaces on locally compact abelian (LCA groups motivated by our work on equations with infinitely many derivatives of interest for string theory and cosmology. In this paper, we focus on compact embedding results and we prove an analog for LCA groups of the classical Rellich lemma and of the Rellich-Kondrachov compactness theorem. Furthermore, we introduce Sobolev spaces on subsets of LCA groups and study its main properties, including the existence of compact embeddings into Lp-spaces.

  10. Listening to your audience: developing an educational tool to assist with recreation planning on private lands

    Science.gov (United States)

    J. Daniel van Dijk; Gary T. Green; Craig A. Miller

    2009-01-01

    The Georgia Forestry Commission in conjunction with the U.S. Forest Service instituted the Forest Stewardship Program (FSP) in 1991. A growing component of the FSP is recreation, which is the component least understood by stewardship planners. A survey was developed to better understand the needs of planners with regard to developing forest recreation plans, and the...

  11. On low-complexity full-diversity detection of multi-user space-time coding

    KAUST Repository

    Ismail, Amr; Alouini, Mohamed-Slim

    2013-01-01

    for a wide range of STBCs to achieve full-diversity under PIC group decoding with or without successive interference cancellation (SIC). Based on the provided design criteria we derive an upper-bound on the achievable rate for a class of codes. A two

  12. Algorithm for Primary Full-thickness Skin Grafting in Pediatric Hand Burns

    Directory of Open Access Journals (Sweden)

    Yang Seo Park

    2012-09-01

    Full Text Available BackgroundPediatric hand burns are a difficult problem because they lead to serious hand deformities with functional impairment due to rapid growth during childhood. Therefore, adequate management is required beginning in the acute stage. Our study aims to establish surgical guidelines for a primary full-thickness skin graft (FTSG in pediatric hand burns, based on long-term observation periods and existing studies.MethodsFrom January 2000 to May 2011, 210 patients underwent primary FTSG. We retrospectively studied the clinical course and treatment outcomes based on the patients' medical records. The patients' demographics, age, sex, injury site of the fingers, presence of web space involvement, the incidence of postoperative late deformities, and the duration of revision were critically analyzed.ResultsThe mean age of the patients was 24.4 months (range, 8 to 94 months, consisting of 141 males and 69 females. The overall observation period was 6.9 years (range, 1 to 11 years on average. At the time of the burn, 56 cases were to a single finger, 73 to two fingers, 45 to three fingers, and 22 to more than three. Among these cases, 70 were burns that included a web space (33.3%. During the observation, 25 cases underwent corrective operations with an average period of 40.6 months.ConclusionsIn the volar area, primary full-thickness skin grafting can be a good indication for an isolated injured finger, excluding the web spaces, and injuries of less than three fingers including the web spaces. Also, in the dorsal area, full-thickness skin grafting can be a good indication. However, if the donor site is insufficient and the wound is large, split-thickness skin grafting can be considered.

  13. INFORMATION SPACE– EDUCATIONAL SPACE

    Directory of Open Access Journals (Sweden)

    Monica LIA

    2015-11-01

    Full Text Available This paper has set the objective of researching how education is influenced by the information society. The first step was to define more precisely the information space. The second step was to identify how information space intersects with the family space and institutional space educational levels represented by pre-school / school and pre-university (kindergarten, at elementary / middle school / high school. Interrelationship between the above mentioned areas was another objective of the research. All these elements have been investigated through the original intention to identify how the information space can become an educational tool to support the family space, education and institutional space. Also, the aim of this research is to offer some solutions in this regard. Often the educational efforts appear to be blocked by the existence of this space. But this paper demonstrates that Informational space can be an enemy of the educational system or can support systems if we knew the internal structure and mechanisms. We can make the Informational Space to work in order to accomplish the educational scope.

  14. The Canadian space program from Black Brant to the International Space Station

    CERN Document Server

    Godefroy, Andrew B

    2017-01-01

    Canada’s space efforts from its origins towards the end of the Second World War through to its participation in the ISS today are revealed in full in this complete and carefully researched history. Employing recently declassified archives and many never previously used sources, author Andrew B. Godefroy explains the history of the program through its policy and many fascinating projects. He assesses its effectiveness as a major partner in both US and international space programs, examines its current national priorities and capabilities, and outlines the country’s plans for the future. Despite being the third nation to launch a satellite into space after the Soviet Union and the United States; being a major partner in the US space shuttle program with the iconic Canadarm; being an international leader in the development of space robotics; and acting as one of the five major partners in the ISS, the Canadian Space Program remains one of the least well-known national efforts of the space age. This book atte...

  15. Tailored Materials for High Efficiency CIDI Engines

    Energy Technology Data Exchange (ETDEWEB)

    Grant, G.J.; Jana, S.

    2012-03-30

    The overall goal of the project, Tailored Materials for High Efficiency Compression Ignition Direct Injection (CIDI) Engines, is to enable the implementation of new combustion strategies, such as homogeneous charge compression ignition (HCCI), that have the potential to significantly increase the energy efficiency of current diesel engines and decrease fuel consumption and environmental emissions. These strategies, however, are increasing the demands on conventional engine materials, either from increases in peak cylinder pressure (PCP) or from increases in the temperature of operation. The specific objective of this project is to investigate the application of a new material processing technology, friction stir processing (FSP), to improve the thermal and mechanical properties of engine components. The concept is to modify the surfaces of conventional, low-cost engine materials. The project focused primarily on FSP in aluminum materials that are compositional analogs to the typical piston and head alloys seen in small- to mid-sized CIDI engines. Investigations have been primarily of two types over the duration of this project: (1) FSP of a cast hypoeutectic Al-Si-Mg (A356/357) alloy with no introduction of any new components, and (2) FSP of Al-Cu-Ni alloys (Alloy 339) by physically stirring-in various quantities of carbon nanotubes/nanofibers or carbon fibers. Experimental work to date on aluminum systems has shown significant increases in fatigue lifetime and stress-level performance in aluminum-silicon alloys using friction processing alone, but work to demonstrate the addition of carbon nanotubes and fibers into aluminum substrates has shown mixed results due primarily to the difficulty in achieving porosity-free, homogeneous distributions of the particulate. A limited effort to understand the effects of FSP on steel materials was also undertaken during the course of this project. Processed regions were created in high-strength, low-alloyed steels up to 0.5 in

  16. Purdue Contribution of Fusion Simulation Program

    Energy Technology Data Exchange (ETDEWEB)

    Jeffrey Brooks

    2011-09-30

    . It will address the origins and structure of the plasma electric field, rotation, the L-H transition, and the wide variety of pedestal relaxation mechanisms. The Whole Device Model will predict the entire discharge evolution given external actuators (i.e., magnets, power supplies, heating, current drive and fueling systems) and control strategies. Based on components operating over a range of physics fidelity, the WDM will model the plasma equilibrium, plasma sources, profile evolution, linear stability and nonlinear evolution toward a disruption (but not the full disruption dynamics). The plan assumes that, as the FSP matures and demonstrates success, the program will evolve and grow, enabling additional science problems to be addressed. The next set of integration opportunities could include: 1) Simulation of disruption dynamics and their effects; 2) Prediction of core profile including 3D effects, mesoscale dynamics and integration with the edge plasma; 3) Computation of non-thermal particle distributions, self-consistent with fusion, radio frequency (RF) and neutral beam injection (NBI) sources, magnetohydrodynamics (MHD) and short-wavelength turbulence.

  17. Fusion Simulation Program Execution Plan

    International Nuclear Information System (INIS)

    Brooks, Jeffrey

    2011-01-01

    . It will address the origins and structure of the plasma electric field, rotation, the L-H transition, and the wide variety of pedestal relaxation mechanisms. The Whole Device Model will predict the entire discharge evolution given external actuators (i.e., magnets, power supplies, heating, current drive and fueling systems) and control strategies. Based on components operating over a range of physics fidelity, the WDM will model the plasma equilibrium, plasma sources, profile evolution, linear stability and nonlinear evolution toward a disruption (but not the full disruption dynamics). The plan assumes that, as the FSP matures and demonstrates success, the program will evolve and grow, enabling additional science problems to be addressed. The next set of integration opportunities could include: 1) Simulation of disruption dynamics and their effects; 2) Prediction of core profile including 3D effects, mesoscale dynamics and integration with the edge plasma; 3) Computation of non-thermal particle distributions, self-consistent with fusion, radio frequency (RF) and neutral beam injection (NBI) sources, magnetohydrodynamics (MHD) and short-wavelength turbulence.

  18. Condensed State Spaces for Symmetrical Coloured Petri Nets

    DEFF Research Database (Denmark)

    Jensen, Kurt

    1996-01-01

    equivalence classes of states and equivalence classes of state changes. It is then possible to construct a condensed state space where each node represents an equivalence class of states while each arc represents an equivalence class of state changes. Such a condensed state space is often much smaller than...... the full state space and it is also much faster to construct. Nevertheless, it is possible to use the condensed state space to verify the same kind of behavioural properties as the full state space. Hence, we do not lose analytic power. We define state spaces and condensed state spaces for a language......-nets (or Petri nets in general) - although such knowledge will, of course, be a help. The first four sections of the paper introduce the basic concepts of CP-nets. The next three sections deal with state spaces, condensed state spaces and computer tools for state space analysis. Finally, there is a short...

  19. Stimulative effect of the fungal biocontrol agent Fusarium oxysporum f.sp. Striga on abundance of nitrifying prokaryotes in a maize rhizosphere

    Science.gov (United States)

    Musyoki, Mary; Enowashu, Esther; Zimmermann, Judith; Muema, Esther; Wainright, Henry; Vanlauwe, Bernard; Cadisch, Georg; Rasche, Frank

    2014-05-01

    The integration of resistant crop varieties and Fusarium oxysporum f.sp. strigae (Foxy-2) strains as biological control agent (BCA) has shown to be an effective control of the weed Striga hermonthica which is parasitic to several cereals (e.g., maize) cultivated in Sub-Saharan Africa. Most studies have examined the efficacy of the BCA and its interactions with host crops, while overlooking the interplay among key microorganisms in the soil nitrogen (N) cycle. Hence, we postulated that both Foxy-2 and Striga pose threats to the indigenous plant root-associated microbial communities involved in N cycling through direct or indirect competition for nutrients and that the application of high quality organic residues would compensate these effects. The primary objective of this study was thus to assess the potential impact of Foxy-2 on indigenous nitrifying prokaryotes in maize rhizosphere cultivated on two distinct soils (sandy Ferric Alisol versus clayey Humic Nitisol) obtained from Machanga and Embu, respectively, in central Kenya. These soils were treated with or without Foxy-2 and Striga; and in combination with high quality (i.e. CN ratio; 13, lignins, 8.9 % and polyphenols, 1.7 %) organic residues (i.e., Tithonia diversifolia) as N source. Using quantitative polymerase chain reaction (qPCR), we followed at three pre-defined sampling dates (14, 28 and 42 days after planting) the responses of ammonia-oxidizing archaea (AOA) and bacteria (AOB), total bacteria and archaea in four treatments of a rhizobox experiment: (i) Foxy-2 plus Striga (F+S), (ii) Striga only (C+S), (iii) Foxy-2 plus Striga plus Tithonia diversifolia residues (F+S+T), and (iv) a non-treated control (C). Overall, the treatment effects on soil microbial populations were, in comparison to the clayey Embu soil, more pronounced in the sandy Machanga soil. Contrary to our expectations, we observed a distinct stimulative, but no resource competition effect of Foxy-2 on the abundance of AOA, as well as

  20. Microstructures, mechanical, and biological properties of a novel Ti-6V-4V/zinc surface nanocomposite prepared by friction stir processing

    Directory of Open Access Journals (Sweden)

    Zhu C

    2018-03-01

    Full Text Available Chenyuan Zhu,1,2,* Yuting Lv,3,4,* Chao Qian,1,2,* Zihao Ding,3,5 Ting Jiao,1,2 Xiaoyu Gu,1,2 Eryi Lu,6 Liqiang Wang,3 Fuqiang Zhang1,2 1Department of Prosthodontics, Ninth People’s Hospital, Shanghai Jiao Tong University School of Medicine, 2Shanghai Key Laboratory of Stomatology, Shanghai Research Institute of Stomatology, National Clinical Research Center of Stomatology, 3State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai, 4College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao, People’s Republic of China; 5Department of Materials Science and Engineering, Carnegie Mellon University, Pittsburgh, PA, USA; 6Department of Stomatology, Ren Ji Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, People’s Republic of China *These authors contributed equally to this work Background: The interaction between the material and the organism affects the survival rate of the orthopedic or dental implant in vivo. Friction stir processing (FSP is considered a new solid-state processing technology for surface modification. Purpose: This study aims to strengthen the surface mechanical properties and promote the osteogenic capacity of the biomaterial by constructing a Ti-6Al-4V (TC4/zinc (Zn surface nanocomposites through FSP. Methods: FSP was used to modify the surface of TC4. The microstructures and mechanical properties were analyzed by scanning electron microscopy, transmission electron microscopy, nanoindentation and Vickers hardness. The biological properties of the modified surface were evaluated by the in vitro and in vivo study. Results: The results showed that nanocrystalline and numerous β regions, grain boundary a phase, coarser acicular α phase and finer acicular martensite α' appeared because of the severe plastic deformation caused by FSP, resulting in a decreased elastic modulus and an increased surface hardness. With the addition of

  1. Strict topoligies in non-Archimedean function spaces

    Directory of Open Access Journals (Sweden)

    A. K. Katsaras

    1984-01-01

    Full Text Available Let F be a non-trivial complete non-Archimedean valued field. Some locally F-convex topologies, on the space Cb(X,E of all bounded continuous functions from a zero-dimensional topological space X to a non-Archimedean locally F-convex space E, are studied. The corresponding dual spaces are also investigated.

  2. One-step synthesis of bismuth molybdate catalysts via flame spray pyrolysis for the selective oxidation of propylene to acrolein

    DEFF Research Database (Denmark)

    Schuh, K.; Kleist, W.; Høj, Martin

    2014-01-01

    Flame spray pyrolysis (FSP) of Bi(III)-and Mo(VI)-2-ethylhexanoate dissolved in xylene resulted in various nanocrystalline bismuth molybdate phases depending on the Bi/Mo ratio. Besides alpha-Bi2Mo3O12 and gamma-Bi2MoO6, FSP gave direct access to the metastable beta-Bi2Mo2O9 phase with high surfa...

  3. Quasi-equilibria in reduced Liouville spaces.

    Science.gov (United States)

    Halse, Meghan E; Dumez, Jean-Nicolas; Emsley, Lyndon

    2012-06-14

    The quasi-equilibrium behaviour of isolated nuclear spin systems in full and reduced Liouville spaces is discussed. We focus in particular on the reduced Liouville spaces used in the low-order correlations in Liouville space (LCL) simulation method, a restricted-spin-space approach to efficiently modelling the dynamics of large networks of strongly coupled spins. General numerical methods for the calculation of quasi-equilibrium expectation values of observables in Liouville space are presented. In particular, we treat the cases of a time-independent Hamiltonian, a time-periodic Hamiltonian (with and without stroboscopic sampling) and powder averaging. These quasi-equilibrium calculation methods are applied to the example case of spin diffusion in solid-state nuclear magnetic resonance. We show that there are marked differences between the quasi-equilibrium behaviour of spin systems in the full and reduced spaces. These differences are particularly interesting in the time-periodic-Hamiltonian case, where simulations carried out in the reduced space demonstrate ergodic behaviour even for small spins systems (as few as five homonuclei). The implications of this ergodic property on the success of the LCL method in modelling the dynamics of spin diffusion in magic-angle spinning experiments of powders is discussed.

  4. Hallazgo de un endocarpo del genero Acer en niveles del Cretácico superior del embalse de Pedrezuela (Guadalix de la Sierra

    Directory of Open Access Journals (Sweden)

    Lesiak, M. A.

    1996-12-01

    Full Text Available In this paper is described and discussed an endocarp of Acer genus that exhibits a morphology like the living species A. buergerianum Miquel. The fruit was met in the upper part of Cretaceous series from the Pedrezuela barrier of Madrid Community. We propose a new denomination for the plant that contains this endocarp: Acer palaeobuergerianum n. fsp. This name has only taxonomic value. The prefix is give in order to the age and -buergerianum by its similarity with the actual species.Se describe y discute un endocarpo fósil perteneciente al género Acer, encontrado en el Cretácico superior del embalse de Pedrezuela (Madrid. Este fruto muestra una marcada semejanza con los endocarpos de la especie actual Acer buergerianum Miquel. Se propone una nueva denominación, con valor taxonómico, para la planta: Acer palaeobuergerianum n. fsp. El prefijo palaeo sugiere su edad y la denominación - buergerianum su semejanza morfológica con la especie actual.

  5. Identification and phylogeny of some species of the genera Sporidiobolus and Rhodotorula using analysis of the 5.8s rDNA gene and two ribosomal internal transcribed spacers

    Directory of Open Access Journals (Sweden)

    Mokhtari M.

    2011-01-01

    Full Text Available Due to the problems encountered in routine morphological and physiological procedures that are used in yeast identification, DNA-based methods have recently been developed. In the present study, l66 yeast strains were isolated from several apple and citrus cultivars. After analysis by basic morphological methods, the ITS1 and ITS2 regions of the isolates were amplified separately, and the isolates were grouped based on fragment size polymorphism (FSP of the amplicons. By comparing the electrophoretic patterns of the PCR products with Rhodotorula mucilaginosa, species were identified as Rhodotorula. For precise and final identification, the ITS-PCR products were subjected to sequencing followed by Blast analysis. As a result, eight isolates were identified as belonging to the Rhodotorula genus, of which five were identified as R. mucilaginosa and three as R. glutinis, and one as a Sporidiobolus. We conclude that the method PCR-FSP, in combination with other approaches, is useful for the identification of yeast species.

  6. Grain refinement of Aluminium alloys using friction stir processing

    International Nuclear Information System (INIS)

    Khraisheh, M.

    2004-01-01

    Full text.Friction Stir Processing (FSP) is a new advanced material processing technique used to refine and homogenize the microstructure of sheet metals. FSP is a solid state processing technique that uses a rapidly rotating non-consumable high strength tool steel pin that extends from a cylindrical shoulder. The rotating pin is forced with a predetermined load into the work piece and moved along with the work pieces, while the rotating pin deforms and stirs the locally heated material. It is a hot working process in which a large amount of deformation is imparted to the sheet. FS processed zone is characterized by dynamic recrystallization which results in grain refinement . this promising emerging process needs further investigations to develop optimum process parameters to produce the desired microstructure. In this work, we present preliminary results on the effects of rotational and translational speeds on grain refinement of AA5052. Under certain processing conditions, sub-micron grain structure was produced using this technique

  7. Flow shop scheduling decisions through Techniques for Order Preference by Similarity to an Ideal Solution (TOPSIS

    Directory of Open Access Journals (Sweden)

    Arun Gupta

    2016-07-01

    Full Text Available The flow-shop scheduling problem (FSP has been widely studied in the literature and having a very active research area. Over the last few decades, a number of heuristic/meta-heuristic solution techniques have been developed. Some of these techniques offer excellent effectiveness and efficiency at the expense of substantial implementation efforts and being extremely complicated. This paper brings out the application of a Multi-Criteria Decision Making (MCDM method known as techniques for order preference by similarity to an ideal solution (TOPSIS using different weighting schemes in flow-shop environment. The objective function is identification of a job sequence which in turn would have minimum makespan (total job completion time. The application of the proposed method to flow shop scheduling is presented and explained with a numerical example. The results of the proposed TOPSIS based technique of FSP are also compared on the basis of some benchmark problems and found compatible with the results obtained from other standard procedures.

  8. Potency of six isolates of biocontrol agents endophytic Trichoderma against fusarium wilt on banana

    Directory of Open Access Journals (Sweden)

    J Taribuka

    2017-01-01

    Full Text Available Fusarium wilt caused by F. oxysporum f.sp. cubense is one of very damaging banana plant diseases which can cause plant death. Disease control using intensive chemical fungicides will have negative impacts on the environment and humans. Endophytic Trichoderma is one of the biological control agents which can reduce the amount of inoculum of pathogens, so it can reduce disease intensity. The objectives of this study was to assess the ability of endophytic Trichoderma in inducing plant resistance against fusarium wilt. Endophytic Trichoderma was obtained from healthy roots of banana from three regencies in Yogyakarta, namely Trichoderma harzianum.swn-1, T. harzianum.swn-2, T. harzianum.psr-1, T. asperrellum, T. gamsii, and T. koningiopsis. Research on induced resintance was conducted in the greenhouse with polybag using Completely Randomized Design with 14 treatments and 3 replications. The results showed that the ability of Trichoderma gamsii antagonism against F. oxysporum f.sp. cubense was 60.61%. T. asperellum and T. harzianum.swn-2 could suppress this disease resulted in disease intensity of 8.33% which categorize as resistant. Trichoderma harzianum.psr-1 was significantly different in stimulating plant vegetative growth. Induced resistance by using endophytic Trichoderma spp. against  F. oxysporum f.sp. cubense showed increase in total phenolic compounds on the third and fourth weeks as well as peroxidase activity on the third, fourth and fifth weeks.  Observation of lignification on  the fifth week  showed that lignification occurred in root xylem

  9. Fixed Point in Topological Vector Space-Valued Cone Metric Spaces

    Directory of Open Access Journals (Sweden)

    Muhammad Arshad

    2010-01-01

    Full Text Available We obtain common fixed points of a pair of mappings satisfying a generalized contractive type condition in TVS-valued cone metric spaces. Our results generalize some well-known recent results in the literature.

  10. Genetic and physical mapping of candidate genes for resistance to Fusarium oxysporum f.sp. tracheiphilum race 3 in cowpea [Vigna unguiculata (L.) Walp].

    Science.gov (United States)

    Pottorff, Marti; Wanamaker, Steve; Ma, Yaqin Q; Ehlers, Jeffrey D; Roberts, Philip A; Close, Timothy J

    2012-01-01

    Fusarium oxysporum f.sp. tracheiphilum (Fot) is a soil-borne fungal pathogen that causes vascular wilt disease in cowpea. Fot race 3 is one of the major pathogens affecting cowpea production in California. Identification of Fot race 3 resistance determinants will expedite delivery of improved cultivars by replacing time-consuming phenotypic screening with selection based on perfect markers, thereby generating successful cultivars in a shorter time period. Resistance to Fot race 3 was studied in the RIL population California Blackeye 27 (resistant) x 24-125B-1 (susceptible). Biparental mapping identified a Fot race 3 resistance locus, Fot3-1, which spanned 3.56 cM on linkage group one of the CB27 x 24-125B-1 genetic map. A marker-trait association narrowed the resistance locus to a 1.2 cM region and identified SNP marker 1_1107 as co-segregating with Fot3-1 resistance. Macro and microsynteny was observed for the Fot3-1 locus region in Glycine max where six disease resistance genes were observed in the two syntenic regions of soybean chromosomes 9 and 15. Fot3-1 was identified on the cowpea physical map on BAC clone CH093L18, spanning approximately 208,868 bp on BAC contig250. The Fot3-1 locus was narrowed to 0.5 cM distance on the cowpea genetic map linkage group 6, flanked by SNP markers 1_0860 and 1_1107. BAC clone CH093L18 was sequenced and four cowpea sequences with similarity to leucine-rich repeat serine/threonine protein kinases were identified and are cowpea candidate genes for the Fot3-1 locus. This study has shown how readily candidate genes can be identified for simply inherited agronomic traits when appropriate genetic stocks and integrated genomic resources are available. High co-linearity between cowpea and soybean genomes illustrated that utilizing synteny can transfer knowledge from a reference legume to legumes with less complete genomic resources. Identification of Fot race 3 resistance genes will enable transfer into high yielding cowpea varieties

  11. Noncommutative phase spaces on Aristotle group

    Directory of Open Access Journals (Sweden)

    Ancille Ngendakumana

    2012-03-01

    Full Text Available We realize noncommutative phase spaces as coadjoint orbits of extensions of the Aristotle group in a two dimensional space. Through these constructions the momenta of the phase spaces do not commute due to the presence of a naturally introduced magnetic eld. These cases correspond to the minimal coupling of the momentum with a magnetic potential.

  12. State Space Modeling Using SAS

    Directory of Open Access Journals (Sweden)

    Rajesh Selukar

    2011-05-01

    Full Text Available This article provides a brief introduction to the state space modeling capabilities in SAS, a well-known statistical software system. SAS provides state space modeling in a few different settings. SAS/ETS, the econometric and time series analysis module of the SAS system, contains many procedures that use state space models to analyze univariate and multivariate time series data. In addition, SAS/IML, an interactive matrix language in the SAS system, provides Kalman filtering and smoothing routines for stationary and nonstationary state space models. SAS/IML also provides support for linear algebra and nonlinear function optimization, which makes it a convenient environment for general-purpose state space modeling.

  13. Space Microbiology

    Science.gov (United States)

    Horneck, Gerda; Klaus, David M.; Mancinelli, Rocco L.

    2010-01-01

    Summary: The responses of microorganisms (viruses, bacterial cells, bacterial and fungal spores, and lichens) to selected factors of space (microgravity, galactic cosmic radiation, solar UV radiation, and space vacuum) were determined in space and laboratory simulation experiments. In general, microorganisms tend to thrive in the space flight environment in terms of enhanced growth parameters and a demonstrated ability to proliferate in the presence of normally inhibitory levels of antibiotics. The mechanisms responsible for the observed biological responses, however, are not yet fully understood. A hypothesized interaction of microgravity with radiation-induced DNA repair processes was experimentally refuted. The survival of microorganisms in outer space was investigated to tackle questions on the upper boundary of the biosphere and on the likelihood of interplanetary transport of microorganisms. It was found that extraterrestrial solar UV radiation was the most deleterious factor of space. Among all organisms tested, only lichens (Rhizocarpon geographicum and Xanthoria elegans) maintained full viability after 2 weeks in outer space, whereas all other test systems were inactivated by orders of magnitude. Using optical filters and spores of Bacillus subtilis as a biological UV dosimeter, it was found that the current ozone layer reduces the biological effectiveness of solar UV by 3 orders of magnitude. If shielded against solar UV, spores of B. subtilis were capable of surviving in space for up to 6 years, especially if embedded in clay or meteorite powder (artificial meteorites). The data support the likelihood of interplanetary transfer of microorganisms within meteorites, the so-called lithopanspermia hypothesis. PMID:20197502

  14. Ffuzz: Towards full system high coverage fuzz testing on binary executables.

    Science.gov (United States)

    Zhang, Bin; Ye, Jiaxi; Bi, Xing; Feng, Chao; Tang, Chaojing

    2018-01-01

    Bugs and vulnerabilities in binary executables threaten cyber security. Current discovery methods, like fuzz testing, symbolic execution and manual analysis, both have advantages and disadvantages when exercising the deeper code area in binary executables to find more bugs. In this paper, we designed and implemented a hybrid automatic bug finding tool-Ffuzz-on top of fuzz testing and selective symbolic execution. It targets full system software stack testing including both the user space and kernel space. Combining these two mainstream techniques enables us to achieve higher coverage and avoid getting stuck both in fuzz testing and symbolic execution. We also proposed two key optimizations to improve the efficiency of full system testing. We evaluated the efficiency and effectiveness of our method on real-world binary software and 844 memory corruption vulnerable programs in the Juliet test suite. The results show that Ffuzz can discover software bugs in the full system software stack effectively and efficiently.

  15. Transport dynamics calculated under the full Mie scattering theory for micron and submicron lunar ejecta in selenocentric, cislunar, and geocentric space

    Science.gov (United States)

    Hyde, T. W.; Alexander, W. M.

    1989-01-01

    In 1967, Lunar Explorer 35 was launched from the earth and placed into a stable orbit around the moon. The data from the dust particle experiment on this spacecraft were essentially continuous over a 5-yr period from the time of insertion in lunar orbit. Analysis of this data has been interpreted to show that micron-sized lunar ejecta leave the moon and traverse through selenocentric and cislunar space and obtain either interplanetary/heliocentric orbits or intercept the earth's magnetosphere and move into geocentric orbits. Extensive studies of the orbital trajectories of lunar particles in this size range have now been conducted that include a calculation of the solar radiation force using the full Mie scattering theory. A significant flux of particles with radii less than 0.1 micron are found to intercept the earth's magnetopause surface. This flux is shown to be strongly dependent upon both the particle's density and its index of refraction.

  16. Weak isometries of Hamming spaces

    Directory of Open Access Journals (Sweden)

    Ryan Bruner

    2016-09-01

    Full Text Available Consider any permutation of the elements of a (finite metric space that preserves a specific distancep. When is such a permutation automatically an isometry of the metric space? In this note we studythis problem for the Hamming spaces H(n,q both from a linear algebraic and combinatorial pointof view. We obtain some sufficient conditions for the question to have an affirmative answer, as wellas pose some interesting open problems.

  17. Mounting and Alignment of Full-Shell Replicated X-Ray Optics

    Science.gov (United States)

    Gubarev, Mikhail; Arnold, William; Kester, Thomas; Ramsey, Brian; Smithers, Martin

    2007-01-01

    We are developing grazing-incidence x-ray optics for astronomy. The optics are full-cylinder mirror shells fabricated using electroformed-nickel replication off super-polished mandrels. For space-based applications where weight is at a premium, very-thin-walled, light-weight mirrors are required. Such shells have been fabricated at MSFC with greater than 15 arcsec resolution. The challenge, however, is to preserve this resolution during mounting and assembly. We present here a status report on a mounting and alignment system currently under development at Marshall Space Flight Center to meet this challenge.

  18. Laser cladding assisted by friction stir processing for preparation of deformed crack-free Ni-Cr-Fe coating with nanostructure

    Science.gov (United States)

    Xie, Siyao; Li, Ruidi; Yuan, Tiechui; Chen, Chao; Zhou, Kechao; Song, Bo; Shi, Yusheng

    2018-02-01

    Although laser cladding has find its widespread application in surface hardening, this technology has been significantly limited by the solidification crack, which usually initiates along grain boundary due to the brittle precipitation in grain boundary and networks formation during the laser rapid melting/solidification process. This paper proposed a novel laser cladding technology assisted by friction stir processing (FSP) to eliminate the usual metallurgical defects by the thermomechanical coupling effect of FSP with the Ni-Cr-Fe as representative coating material. By the FSP assisted laser cladding, the crack in laser cladding Ni-Cr-Fe coating was eliminated and the coarse networks of laser cladding coating was transformed into dispersed nanoparticles. Moreover, the plastic layers with thicknesses 47-140 μm can be observed, with gradient grain refinement from substrate to the top surface in which grain size reached 300 nm and laser photocoagulation net second phase crushed in the layer. In addition, cracks closed in the plastic zone. The refinement of grain resulted the hardness increased to over 400 HV, much higher than the 300 HV of the laser cladding structure. After FSP, the friction coefficient decreased from 0.6167 to 0.5645 which promoted the wear resistance.

  19. The entire sequence over Musielak p-metric space

    Directory of Open Access Journals (Sweden)

    C. Murugesan

    2016-04-01

    Full Text Available In this paper, we introduce fibonacci numbers of Γ2(F sequence space over p-metric spaces defined by Musielak function and examine some topological properties of the resulting these spaces.

  20. Mastering the Master Space

    CERN Document Server

    Forcella, Davide; He, Yang-Hui; Zaffaroni, Alberto

    2008-01-01

    Supersymmetric gauge theories have an important but perhaps under-appreciated notion of a master space, which controls the full moduli space. For world-volume theories of D-branes probing a Calabi-Yau singularity X the situation is particularly illustrative. In the case of one physical brane, the master space F is the space of F-terms and a particular quotient thereof is X itself. We study various properties of F which encode such physical quantities as Higgsing, BPS spectra, hidden global symmetries, etc. Using the plethystic program we also discuss what happens at higher number N of branes. This letter is a summary and some extensions of the key points of a longer companion paper arXiv:0801.1585.

  1. Grooming the Shuttle for cost-effective access to space

    Science.gov (United States)

    Moore, J. W.

    1985-01-01

    An assessment is made of the performance of the Space Shuttle-based Space Transportation System (STS) from the initial flights in 1981 to the present, which has involved the launching of 12 satellites and the retrieval of two. It is expected that the STS will soon be able to schedule 24 routine missions/year, upon the achievement of full operational status for the full fleet of four Space Shuttles and the completion of support facilities at both the Kennedy Space Center and Vandenberg Air Force Base. The prospects for space industrialization efforts based on STS are noted.

  2. Partial Actions, Paradoxicality and Topological full Groups

    DEFF Research Database (Denmark)

    Scarparo, Eduardo

    uniform Roe algebra is finite. In Article C, we analyze the C*-algebra generated by the Koopman representation of a topological full group, showing, in particular, that it is not AF andhas real rank zero. We also prove that if G is a finitely generated, elementary amenable group, and C*(G) has real rank......We study how paradoxicality properties affect the way groups partially acton topological spaces and C*-algebras. We also investigate the real rank zero and AF properties for certain classes of group C*-algebras. Specifically, in article A, we characterize supramenable groups in terms of existence...... of invariant probability measures for partial actions on compact Hausdorff spaces and existence of tracial states on partial crossed products. These characterizations show that, in general, one cannot decompose a partial crossed product of a C*-algebra by a semidirect product of groups as two iterated...

  3. Selektion und Qualifikation von non-professionellen Helfern für die psychologische Nothilfe

    OpenAIRE

    Hersberger, Johanna

    2006-01-01

    Mit der Vereinbarung einer Zusammenarbeit zwischen dem Bundesamt für Bevölkerungsschutz (BABS) und der Föderation der Schweizer Psychologinnen und Psychologen (FSP) vom Oktober 2000 wurden die Grundlagen für die gemeinsame Ausbildung von non-professionellen Helfern in psychologischer Nothilfe gelegt. Ausgehend von einer heterogenen Ausbildungslandschaft und uneinheitlichen Einsatzgepflogenheiten hatte die Kooperation BABS/FSP den Anspruch, nicht nur eine den wissenschaftlich...

  4. Two classes of metric spaces

    Directory of Open Access Journals (Sweden)

    Isabel Garrido

    2016-04-01

    Full Text Available The class of metric spaces (X,d known as small-determined spaces, introduced by Garrido and Jaramillo, are properly defined by means of some type of real-valued Lipschitz functions on X. On the other hand, B-simple metric spaces introduced by Hejcman are defined in terms of some kind of bornologies of bounded subsets of X. In this note we present a common framework where both classes of metric spaces can be studied which allows us to see not only the relationships between them but also to obtain new internal characterizations of these metric properties.

  5. Religion and Communication Spaces. A Semio-pragmatic Approach

    Directory of Open Access Journals (Sweden)

    Roger Odin

    2015-11-01

    Full Text Available Following the reflection initiated in his book The Spaces of Communication, Roger Odin suggests a new distinction between physical communication spaces and mental communication spaces (spaces that we have inside us. The suggestion is exemplified by three film analyses dedicated to the relationships between religion and communication.

  6. Development and characterization of nano-micro structures as carrier for bioactive compounds

    DEFF Research Database (Denmark)

    Boutrup Stephansen, Karen

    the amount of hydrophobic pockets available for dye interaction (Paper III). The inherent property of FSP as consumed food made the fibers degradable by proteolytic enzymes, and the degradation products were observed to inhibit the diabetes related enzyme dipeptidyl peptidase-4 (Paper I). The FSP fibers...... showed potential as carrier system for delivery of drugs, bioactive agents, and nutraceuticals. The dipeptide Ala-Trp, rhodamine B, or insulin was encapsulated into the fibers, and the release was studied in biorelevant media (Paper I, Paper II, and Paper III). Release of Ala-Trp was slightly decreased...... fibers in a dose-dependent manner, neutral surfactants had no effect, and cationic surfactants decreased the insulin release to negligible amounts (Paper III). Encapsulation of insulin into the FSP fibers provided protection against chymotrypsin degradation, and interactions between the fibers...

  7. Bioactive protein-based nanofibers interact with intestinal biological components resulting in transepithelial permeation of a therapeutic protein

    DEFF Research Database (Denmark)

    Boutrup Stephansen, Karen; García-Díaz, María; Jessen, Flemming

    2015-01-01

    Proteins originating from natural sources may constitute a novel type of material for use in drug delivery. However, thorough understanding of the behavior and effects of such a material when processed into a matrix together with a drug is crucial prior to further development into a drug product....... In the present study the potential of using bioactive electrospun fish sarcoplasmic proteins (FSP) as a carrier matrix for small therapeutic proteins was demonstrated in relation to the interactions with biological components of the intestinal tract. The inherent structural and chemical properties of FSP...... as a biomaterial facilitated interactions with cells and enzymes found in the gastrointestinal tract and displayed excellent biocompatibility. More specifically, insulin was efficiently encapsulated into FSP fibers maintaining its conformation, and subsequent controlled release was obtained in simulated intestinal...

  8. Electrospun fish protein fibers as a biopolymer-based carrier – implications for oral protein delivery

    DEFF Research Database (Denmark)

    Boutrup Stephansen, Karen; García-Díaz, María; Jessen, Flemming

    2014-01-01

    Purpose: Protein-based electrospun fibers have emerged as novel nanostructured materials for tissue engineering and drug delivery due to their unique structural characteristics, biocompatibility and biodegradability. The aim of this study was to explore the use of electrospun fibers based on fish...... sarcoplasmic proteins as an oral delivery platform for biopharmaceuticals, using insulin as a model protein. Methods: Fish sarcoplasmic proteins (FSP) were isolated from fresh cod and electrospun into nanomicrofibers using insulin as a model payload. The morphology of FSP fibers was characterized using...... differentiated Caco-2 cell monolayers was followed by RP-HPLC and ELISA, and the transepithelial electrical resistance (TEER) was measured before and after the experiment. Cell viability was assessed by the MTS/PMS assay. Results: Insulin was encapsulated in the electrospun FSP fibers with high efficiency, high...

  9. Fat-specific protein 27 regulates storage of triacylglycerol

    DEFF Research Database (Denmark)

    Keller, P.; Petrie, J.T.; Rose, P. De

    2008-01-01

    FSP27 (fat-specific protein 27) is a member of the cell death-inducing DNA fragmentation factor-alpha-like effector (CIDE) family. Although Cidea and Cideb were initially characterized as activators of apoptosis, recent studies have demonstrated important metabolic roles for these proteins...... in several cell types without induction of adipocyte genes. Increased triacylglycerol is likely due to decreased beta-oxidation of nonesterified fatty acids. Altered flux of fatty acids into triacylglycerol may be a direct effect of FSP27 function, which is localized to lipid droplets in 293T cells and 3T3-L...... decreases with total fat mass but is not associated with measures of insulin resistance (e.g. homeostasis model assessment). Together, these data indicate that FSP27 binds to lipid droplets and regulates their enlargement Udgivelsesdato: 2008/5/23...

  10. From the habermasian space to the new forms of the public space

    Directory of Open Access Journals (Sweden)

    Dinu (Stan, E.-L.

    2011-01-01

    Full Text Available The Habermasian theoretical perspective offers, in the literature, a detailed image of the “public sphere” concept signification. Being applied, over the years, in issues related to media theories too (globalisation, consumerism, democracy, the concept of “public sphere” has undergone radical changes due, mainly, to the emergence and convergence of electronic media. In this respect, this article does nothing more than to describe and analyze, in a realistic way, the public space, the mechanisms involved in it, as well the interplay of the public space with the private one. We could say that this dissolution of the public space is one of the major consequences of postmodernism.

  11. FCJ-133 The Scripted Spaces of Urban Ubiquitous Computing: The experience, poetics, and politics of public scripted space

    Directory of Open Access Journals (Sweden)

    Christian Ulrik Andersen

    2011-12-01

    Full Text Available This article proposes and introduces the concept of ‘scripted space’ as a new perspective on ubiquitous computing in urban environments. Drawing on urban history, computer games, and a workshop study of the city of Lund the article discusses the experience of digitally scripted spaces, and their relation to the history of public spaces. In conclusion, the article discusses the potential for employing scripted spaces as a reinvigoration of urban public space.

  12. Space weather and space anomalies

    Directory of Open Access Journals (Sweden)

    L. I. Dorman

    2005-11-01

    Full Text Available A large database of anomalies, registered by 220 satellites in different orbits over the period 1971-1994 has been compiled. For the first time, data from 49 Russian Kosmos satellites have been included in a statistical analysis. The database also contains a large set of daily and hourly space weather parameters. A series of statistical analyses made it possible to quantify, for different satellite orbits, space weather conditions on the days characterized by anomaly occurrences. In particular, very intense fluxes (>1000 pfu at energy >10 MeV of solar protons are linked to anomalies registered by satellites in high-altitude (>15000 km, near-polar (inclination >55° orbits typical for navigation satellites, such as those used in the GPS network, NAVSTAR, etc. (the rate of anomalies increases by a factor ~20, and to a much smaller extent to anomalies in geostationary orbits, (they increase by a factor ~4. Direct and indirect connections between anomaly occurrence and geomagnetic perturbations are also discussed.

  13. BANQUET SPEECH Full Circle: Star Ferry to Stardust

    Science.gov (United States)

    Matthews, Clifford N.

    2008-10-01

    Good evening. I'd like to invite you to join me on a journey that could be entitled “Full Circle: Star Ferry to Stardust”. “Star Ferry” represents Hong Kong, my home town, and especially its university - Hong Kong University - as I knew it during the years of World War II. “Stardust” refers to our gathering here to report on our research on possible organic chemistry in space.

  14. Banach frames for multivariate alpha-modulation spaces

    DEFF Research Database (Denmark)

    Borup, Lasse; Nielsen, Morten

    2006-01-01

    The α-modulation spaces [$Mathematical Term$], form a family of spaces that include the Besov and modulation spaces as special cases. This paper is concerned with construction of Banach frames for α-modulation spaces in the multivariate setting. The frames constructed are unions of independent Ri...... Riesz sequences based on tensor products of univariate brushlet functions, which simplifies the analysis of the full frame. We show that the multivariate α-modulation spaces can be completely characterized by the Banach frames constructed....

  15. On Neutrosophic Soft Topological Space

    Directory of Open Access Journals (Sweden)

    Tuhin Bera

    2018-03-01

    Full Text Available In this paper, the concept of connectedness and compactness on neutrosophic soft topological space have been introduced along with the investigation of their several characteristics. Some related theorems have been established also. Then, the notion of neutrosophic soft continuous mapping on a neutrosophic soft topological space and it’s properties are developed here.

  16. Completion of a Dislocated Metric Space

    Directory of Open Access Journals (Sweden)

    P. Sumati Kumari

    2015-01-01

    Full Text Available We provide a construction for the completion of a dislocated metric space (abbreviated d-metric space; we also prove that the completion of the metric associated with a d-metric coincides with the metric associated with the completion of the d-metric.

  17. Imaging disturbance zones ahead of a tunnel by elastic full-waveform inversion: Adjoint gradient based inversion vs. parameter space reduction using a level-set method

    Directory of Open Access Journals (Sweden)

    Andre Lamert

    2018-03-01

    Full Text Available We present and compare two flexible and effective methodologies to predict disturbance zones ahead of underground tunnels by using elastic full-waveform inversion. One methodology uses a linearized, iterative approach based on misfit gradients computed with the adjoint method while the other uses iterative, gradient-free unscented Kalman filtering in conjunction with a level-set representation. Whereas the former does not involve a priori assumptions on the distribution of elastic properties ahead of the tunnel, the latter introduces a massive reduction in the number of explicit model parameters to be inverted for by focusing on the geometric form of potential disturbances and their average elastic properties. Both imaging methodologies are validated through successful reconstructions of simple disturbances. As an application, we consider an elastic multiple disturbance scenario. By using identical synthetic time-domain seismograms as test data, we obtain satisfactory, albeit different, reconstruction results from the two inversion methodologies. The computational costs of both approaches are of the same order of magnitude, with the gradient-based approach showing a slight advantage. The model parameter space reduction approach compensates for this by additionally providing a posteriori estimates of model parameter uncertainty. Keywords: Tunnel seismics, Full waveform inversion, Seismic waves, Level-set method, Adjoint method, Kalman filter

  18. Models for Immune Response and Immune Evasion in MSI Cancer and Lynch Syndrome

    OpenAIRE

    Özcan, Mine

    2017-01-01

    Microsatellite-unstable (MSI) cancers occurring in the context of the hereditary Lynch syndrome or as sporadic cancers elicit pronounced tumor-specific immune responses. The pronounced immune response was shown to be closely associated with frameshift peptides (FSP) that are generated as a result of deficiency in DNA mismatch repair system leading to insertion/deletion mutations in coding microsatellites (cMS). FSP neoantigens are long antigenic amino acid stretches that bear m...

  19. Lasers in space.

    CSIR Research Space (South Africa)

    Michaelis, MM

    2008-04-01

    Full Text Available cube, laser beam reflectors, placed on the Moon half a century ago. These early achievements will soon be followed by a plethora of experiments involving lasers in low earth orbit (LEO) or at Lagrange points. And not much later, laser communications... will stretch out as far as Mars and beyond. One important low Earth orbit (LEO) application is the removal of space debris by Earth based or LEO relayed lasers as promoted by Phipps et al.3. Another is military communication. The prominent L1 laser space...

  20. Uniformizable Cauchy spaces

    Directory of Open Access Journals (Sweden)

    Eva Lowen-Colebunders

    1982-01-01

    Full Text Available A family C of filters on a set X is uniformizable if there is a uniformity on X such that C is its collection of Cauchy filters. Using the theory of completions and Cauchy continuous maps for Cauchy spaces, we obtain characterizations of uniformizable Cauchy spaces. In particular, given a Cauchy structure C on X we investigate under what conditions the filter u(C=⋂F∈CF×F is a uniformity and C is its collection of Cauchy filters. This problem is treated using Cauchy covering systems.

  1. Full cyclic coordinate descent: solving the protein loop closure problem in Cα space

    Directory of Open Access Journals (Sweden)

    Hamelryck Thomas

    2005-06-01

    Full Text Available Abstract Background Various forms of the so-called loop closure problem are crucial to protein structure prediction methods. Given an N- and a C-terminal end, the problem consists of finding a suitable segment of a certain length that bridges the ends seamlessly. In homology modelling, the problem arises in predicting loop regions. In de novo protein structure prediction, the problem is encountered when implementing local moves for Markov Chain Monte Carlo simulations. Most loop closure algorithms keep the bond angles fixed or semi-fixed, and only vary the dihedral angles. This is appropriate for a full-atom protein backbone, since the bond angles can be considered as fixed, while the (φ, ψ dihedral angles are variable. However, many de novo structure prediction methods use protein models that only consist of Cα atoms, or otherwise do not make use of all backbone atoms. These methods require a method that alters both bond and dihedral angles, since the pseudo bond angle between three consecutive Cα atoms also varies considerably. Results Here we present a method that solves the loop closure problem for Cα only protein models. We developed a variant of Cyclic Coordinate Descent (CCD, an inverse kinematics method from the field of robotics, which was recently applied to the loop closure problem. Since the method alters both bond and dihedral angles, which is equivalent to applying a full rotation matrix, we call our method Full CCD (FCDD. FCCD replaces CCD's vector-based optimization of a rotation around an axis with a singular value decomposition-based optimization of a general rotation matrix. The method is easy to implement and numerically stable. Conclusion We tested the method's performance on sets of random protein Cα segments between 5 and 30 amino acids long, and a number of loops of length 4, 8 and 12. FCCD is fast, has a high success rate and readily generates conformations close to those of real loops. The presence of constraints

  2. International Space Law

    Directory of Open Access Journals (Sweden)

    M. Lits

    2017-01-01

    Full Text Available It is well known that the modern day technologies that drive our global society are highly dependent on the use of outer space. For example, daily activities such as sending emails, making phone calls and carrying out bank transactions cannot be done unless satellite technologies are involved. When you catch a plane, the air traffic control is dependent on GPS. Even natural disaster management is dependent on satellite imaging. Taking into account the importance of this, it becomes increasingly necessary to be knowledgeable in the field of international law as it is the only sphere of law that reaches beyond the physical boundaries of the Earth, goes deep into space and provides protection for today’s society. With new steps being taken to exploit further the potentials of outer space, and with increasing talk of new space missions and new discoveries, current international space law is being placed under scrutiny, for it should be remembered that the major international legal documents in this field were adopted in the middle of the 20th century, and thus there are fears that the law may have become obsolete, irrelevant in the face of new challenges in the use of outer space. This paper delivers an analysis of existing international space law and attempts to raise several crucial issues pertinent in the area.

  3. The structure of conscious bodily self-perception during full-body illusions.

    Science.gov (United States)

    Dobricki, Martin; de la Rosa, Stephan

    2013-01-01

    Previous research suggests that bodily self-identification, bodily self-localization, agency, and the sense of being present in space are critical aspects of conscious full-body self-perception. However, none of the existing studies have investigated the relationship of these aspects to each other, i.e., whether they can be identified to be distinguishable components of the structure of conscious full-body self-perception. Therefore, the objective of the present investigation is to elucidate the structure of conscious full-body self-perception. We performed two studies in which we stroked the back of healthy individuals for three minutes while they watched the back of a distant virtual body being synchronously stroked with a virtual stick. After visuo-tactile stimulation, participants assessed changes in their bodily self-perception with a custom made self-report questionnaire. In the first study, we investigated the structure of conscious full-body self-perception by analyzing the responses to the questionnaire by means of multidimensional scaling combined with cluster analysis. In the second study, we then extended the questionnaire and validated the stability of the structure of conscious full-body self-perception found in the first study within a larger sample of individuals by performing a principle components analysis of the questionnaire responses. The results of the two studies converge in suggesting that the structure of conscious full-body self-perception consists of the following three distinct components: bodily self-identification, space-related self-perception (spatial presence), and agency.

  4. Neutrosophic Crisp Sets & Neutrosophic Crisp Topological Spaces

    Directory of Open Access Journals (Sweden)

    A. A. Salama

    2014-03-01

    Full Text Available In this paper, we generalize the crisp topological spaces to the notion of neutrosophic crisp topological space, and we construct the basic concepts of the neutrosophic crisp topology. In addition to these, we introduce the definitions of neutrosophic crisp continuous function and neutrosophic crisp compact spaces. Finally, some characterizations concerning neutrosophic crisp compact spaces are presented and one obtains several properties. Possible application to GIS topology rules are touched upon.

  5. Transverse entanglement migration in Hilbert space

    International Nuclear Information System (INIS)

    Chan, K. W.; Torres, J. P.; Eberly, J. H.

    2007-01-01

    We show that, although the amount of mutual entanglement of photons propagating in free space is fixed, the type of correlations between the photons that determine the entanglement can dramatically change during propagation. We show that this amounts to a migration of entanglement in Hilbert space, rather than real space. For the case of spontaneous parametric down-conversion, the migration of entanglement in transverse coordinates takes place from modulus to phase of the biphoton state and back again. We propose an experiment to observe this migration in Hilbert space and to determine the full entanglement

  6. Information Space, Information Field, Information Environment

    Directory of Open Access Journals (Sweden)

    Victor Ya. Tsvetkov

    2014-08-01

    Full Text Available The article analyzes information space, information field and information environment; shows that information space can be natural and artificial; information field is substantive and processual object and articulates the space property; information environment is concerned with some object and acts as the surrounding in relation to it and is considered with regard to it. It enables to define information environment as a subset of information space. It defines its passive description. Information environment can also be defined as a subset of information field. It corresponds to its active description.

  7. Probabilistic G-Metric space and some fixed point results

    Directory of Open Access Journals (Sweden)

    A. R. Janfada

    2013-01-01

    Full Text Available In this note we introduce the notions of generalized probabilistic metric spaces and generalized Menger probabilistic metric spaces. After making our elementary observations and proving some basic properties of these spaces, we are going to prove some fixed point result in these spaces.

  8. public spaces

    Directory of Open Access Journals (Sweden)

    Elena Grigoryeva

    2013-01-01

    Full Text Available The topic of this issue is PUBLIC SPACES. It is familiar and clear to every citizen. The streets and courtyards as childhood experiences remain with us forever. And these are the places where we come with our parents at weekends, where we meet friends, where we have dates and where we already come for a walk with our children.The history of public spaces is long and captivating. It was the main city squares where the most important events took place in history. The Agoras of Ancient Greece and the Roman Forums, the squares of Vatican, Paris and London, Moscow and Saint Petersburg… Greve, Trafalgar, Senate, Palace, Red, Bolotnaya – behind every name there is life of capitals, countries and nations.Public spaces, their shapes, image and development greatly influence the perception of the city as a whole. Both visitors and inhabitants can see in public spaces not only the visage but the heart, the soul and the mind of the city.Unfortunately, sometimes we have to prove the value of public spaces and defend them from those who consider them nothing but a blank space, nobody’s land destined for barbarous development.What should happen to make citizens perceive public spaces as their own and to make authorities consider development and maintenance of squares and parks their priority task against the  background of increasing competition between cities and the fight for human capital? Lately they more often say about “a high-quality human capital”. And now, when they say “the city should be liveable” they add “for all groups of citizens, including the creative class”.

  9. Rollerchain, a Blockchain With Safely Pruneable Full Blocks

    OpenAIRE

    Chepurnoy, Alexander; Larangeira, Mario; Ojiganov, Alexander

    2016-01-01

    Bitcoin is the first successful decentralized global digital cash system. Its mining process requires intense computational resources, therefore its usefulness remains a disputable topic. We aim to solve three problems with Bitcoin and other blockchain systems of today by repurposing their work. First, space to store a blockchain is growing linearly with number of transactions. Second, a honest node is forced to be irrational regarding storing full blocks by a way implementations are done. Th...

  10. Astronautics Degrees for Space Industry

    Science.gov (United States)

    Gruntman, M.; Brodsky, R.; Erwin, D.; Kunc, J.

    The Astronautics Program (http://astronautics.usc.edu) of the University of Southern California (USC) offers a full set of undergraduate and graduate degree programs in Aerospace Engineering with emphasis in Astronautics. The Bachelor of Science degree program in Astronautics combines basic science and engineering classes with specialized astronautics classes. The Master of Science degree program in Astronautics offers classes in various areas of space technology. The Certificate in Astronautics targets practicing engineers and scientists who enter space-related fields and/or who want to obtain training in specific space-related areas. Many specialized graduate classes are taught by adjunct faculty working at the leading space companies. The Master of Science degree and Certificate are available through the USC Distance Education Network (DEN). Today, the Internet allows us to reach students anywhere in the world through webcasting. The majority of our graduate students, as well as those pursuing the Certificate, work full time as engineers in the space industry and government research and development centers. The new world of distance learning presents new challenges and opens new opportunities. We show how the transformation of distance learning and particularly the introduction of webcasting transform organization of the program and class delivery. We will describe in detail the academic focus of the program, student reach, and structure of program components. Program development is illustrated by the student enrollment dynamics and related industrial trends; the lessons learned emphasize the importance of feedback from the students and from the space industry.

  11. Long-term effects of lowland properties system on soil physicochemical properties and rice yield in Ashanti Region of Ghana

    Energy Technology Data Exchange (ETDEWEB)

    Obalum, S. E.; Oppong, J.; Nwite, J. C.; Watanabe, Y.; Buri, M. M.; Igwe, C. A.; Wakatsuki, T.

    2012-11-01

    Lowland sawah is viewed as a sustainable alternative to traditional rice culture in West Africa. Sawah (a bund-demarcated, puddled, leveled, and water-regulated rice field) has received growing research attention lately, but no data exist yet on the systems long-term agronomic impact. In a clayey inland-valley soil in southern Ghana, 10-year-old sawah plots (OSP), fresh sawah plots (FSP), and non-sawah plots (NSP) were maintained under both ponded and nonponded conditions in 2007. The OSP enhanced soil status of exchangeable nutrients compared to NSP. There were relative improvements in soil bulk density, total porosity, and field moisture content (OSP = FSP > NSP), with clear benefits of ponding over non-ponding in OSP. The NSP was so unsustainable that it showed less favourable values of these variables than an adjacent fallowed plot. These soil variables deteriorated with time, with significant differences in FSP. Soil moisture retention data for tension range of 0-300 kPa depicted the importance of puddling and ponding. During 2001-2009, OSP consistently out-yielded NSP by five times on average. During 2007-2009 when all three plots co-existed, grain yields averaged 5.80, 4.80 and 1.10 Mg ha-1 in OSP, FSP and NSP, respectively. In 2007 yields, OSP minus FSP was higher than NSP; in 2008/2009, the opposite prevailed. These results highlight the agronomic benefits of continuous sawah-based rice production. Although the positive effects of puddling on the soil hydrophysical properties were largely responsible for the wide margin in yield between sawah and traditional systems, other yield-enhancing factors, particularly bunds for water control, were also lacking in the latter. (Author) 37 refs.

  12. JUNO E/J/SS WAVES CALIBRATED SURVEY FULL RESOLUTION V1.0

    Data.gov (United States)

    National Aeronautics and Space Administration — The Juno Waves calibrated full resolution survey data set includes all low rate science electric spectral densities from 50Hz to 41MHz and magnetic spectral...

  13. Thermal management of space stations

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Thermal management aims at making full use of energy resources available in the space station to reduce energy consumption, waste heat rejection and the weight of the station. It is an extension of the thermal control. This discussion introduces the concept and development of thermal management, presents the aspects of thermal management and further extends its application to subsystems of the space station.

  14. Lightning Protection for the Orion Space Vehicle

    Science.gov (United States)

    Scully, Robert

    2015-01-01

    The Orion space vehicle is designed to requirements for both direct attachment and indirect effects of lightning. Both sets of requirements are based on a full threat 200kA strike, in accordance with constraints and guidelines contained in SAE ARP documents applicable to both commercial and military aircraft and space vehicles. This paper describes the requirements as levied against the vehicle, as well as the means whereby the design shows full compliance.

  15. High strain rate superplasticity in a friction stir processed 7075 Al alloy

    Energy Technology Data Exchange (ETDEWEB)

    Mishra, R.S.; Mahoney, M.W.; McFaden, S.X.; Mara, N.A.; Mukherjee, A.K.

    1999-12-31

    In this paper, the authors report the first results using friction stir processing (FSP). In the last ten years, a new technique of Friction Stir Welding (FSW) has emerged as an exciting solid state joining technique for aluminum alloys. This technique, developed by The Welding Institute (TWI), involves traversing a rotating tool that produces intense plastic deformation through a stirring action. The localized heating is produced by friction between the tool shoulder and the sheet top surface, as well as plastic deformation of the material in contact with the tool. This results in a stirred zone with a very fine grain size in a single pass. Mahoney et al. observed a grain size of 3 {micro}m in a 7075 Al alloy. This process can be easily adopted as a processing technique to obtain fine grain size. FSP of a commercial 7075 Al alloy resulted in significant enhancement of superplastic properties. The optimum superplastic strain rate was 10{sup {minus}2}s{sup {minus}1} at 490 C in the FSP 7075 Al alloy, an improvement of more than an order of magnitude in strain rate. The present results suggest an exciting possibility to use a simple FSP technique to enhance grain size dependent properties.

  16. Confined Space Evaluation Student Manual, #19613

    Energy Technology Data Exchange (ETDEWEB)

    Wilmot, David Ezekiel [Los Alamos National Laboratory

    2016-08-29

    Many workplaces contain spaces that are considered to be “confined” because their configuration hinders the activities of employees who must enter into, work in, and exit from them. In general, the permit-required confined spaces (PRCSs) Occupational Safety and Health Administration (OSHA) standard requires that Los Alamos National Laboratory (LANL) evaluate the workplace to determine if any spaces are PRCSs. The standard specifies strict procedures for the evaluation and atmospheric testing of a space before and during an entry by workers. The OSHA PRCS standard provides for alternative (less stringent than full-permit) entry procedures in cases where the only hazard in a space is atmospheric and the hazard can be controlled by forced air. At LANL, all confined spaces or potential confined spaces on LANL-owned or -operated property must be identified and evaluated by a confined space evaluator accompanied by a knowledgeable person. This course provides the information needed by confined space evaluators to make judgements about whether a space is a confined space, and if so, whether the space will require a permit for entry.

  17. Data management on the fusion computational pipeline

    International Nuclear Information System (INIS)

    Klasky, S; Beck, M; Bhat, V; Feibush, E; Ludaescher, B; Parashar, M; Shoshani, A; Silver, D; Vouk, M

    2005-01-01

    Fusion energy science, like other science areas in DOE, is becoming increasingly data intensive and network distributed. We discuss data management techniques that are essential for scientists making discoveries from their simulations and experiments, with special focus on the techniques and support that Fusion Simulation Project (FSP) scientists may need. However, the discussion applies to a broader audience since most of the fusion SciDAC's, and FSP proposals include a strong data management component. Simulations on ultra scale computing platforms imply an ability to efficiently integrate and network heterogeneous components (computational, storage, networks, codes, etc), and to move large amounts of data over large distances. We discuss the workflow categories needed to support such research as well as the automation and other aspects that can allow an FSP scientist to focus on the science and spend less time tending information technology

  18. Social workers' experiences as the family support person during cardiopulmonary resuscitation attempts.

    Science.gov (United States)

    Firn, Janice; DeVries, Keli; Morano, Dawnielle; Spano-English, Toni

    2017-07-01

    During inhospital cardiopulmonary resuscitation attempts, a designated family support person (FSP) may provide guidance and support to family members. Research on nurses and chaplains in this role has been published. Social workers also regularly fulfill this service, however, little is known about how they perceive and enact this role. To explore their experiences, qualitative interviews (n = 10) were conducted with FSP social workers. Critical realist thematic analysis identified five themes: walking in cold, promoting family presence, responding to the whole spectrum of grief, going beyond the family support role, and repercussions of bearing witness. Social workers perform a variety of tasks to promote family presence during resuscitation attempts and provide psychosocial support over the continuum of care. The FSP role impacts social workers emotionally and professionally. Implications for hospital policy, staffing, and clinical practice are discussed.

  19. The Mackey convergence condition for spaces with webs

    Directory of Open Access Journals (Sweden)

    Thomas E. Gilsdorf

    1988-01-01

    Full Text Available If each sequence converging to 0 in a locally convex space is also Mackey convergent to 0, that space is said to satisfy the Mackey convergence condition. The problem of characterizing those locally convex spaces with this property is still open. In this paper, spaces with compatible webs are used to construct both a necessary and a sufficient condition for a locally convex space to satisfy the Mackey convergence condition.

  20. Smarandache Spaces as a New Extension of the Basic Space-Time of General Relativity

    Directory of Open Access Journals (Sweden)

    Rabounski D.

    2010-04-01

    Full Text Available This short letter manifests how Smarandache geometries can be employed in order to extend the “classical” basis of the General Theory of Relativity (Riemannian geometry through joining the properties of two or more (different geometries in the same single space. Perspectives in this way seem much profitable: the basic space-time of General Relativity can be extended to not only metric geometries, but even to non-metric ones (where no distances can be measured, or to spaces of the mixed kind which possess the properties of both metric and non-metric spaces (the latter should be referred to as “semi-metric spaces”. If both metric and non-metric properties possessed at the same (at least one point of a space, it is one of Smarandache geometries, and should be re- ferred to as “Smarandache semi-metric space”. Such spaces can be introduced accord- ing to the mathematical apparatus of physically observable quantities (chronometric invariants, if we consider a breaking of the observable space metric in the continuous background of the fundamental metric tensor.

  1. Carving out humanitarian space

    Directory of Open Access Journals (Sweden)

    Jean-François Durieux

    2008-01-01

    Full Text Available Agencies working inside Myanmar to assist forcibly displacedpeople work within an extremely constricted operationalenvironment. Despite occasional glimmers of hope, carvingout sufficient humanitarian space to meet urgent needsremains an uphill struggle.

  2. Momentum-Space Josephson Effects

    Science.gov (United States)

    Hou, Junpeng; Luo, Xi-Wang; Sun, Kuei; Bersano, Thomas; Gokhroo, Vandna; Mossman, Sean; Engels, Peter; Zhang, Chuanwei

    2018-03-01

    The Josephson effect is a prominent phenomenon of quantum supercurrents that has been widely studied in superconductors and superfluids. Typical Josephson junctions consist of two real-space superconductors (superfluids) coupled through a weak tunneling barrier. Here we propose a momentum-space Josephson junction in a spin-orbit coupled Bose-Einstein condensate, where states with two different momenta are coupled through Raman-assisted tunneling. We show that Josephson currents can be induced not only by applying the equivalent of "voltages," but also by tuning tunneling phases. Such tunneling-phase-driven Josephson junctions in momentum space are characterized through both full mean field analysis and a concise two-level model, demonstrating the important role of interactions between atoms. Our scheme provides a platform for experimentally realizing momentum-space Josephson junctions and exploring their applications in quantum-mechanical circuits.

  3. Categories of space in music and lifestyles

    Directory of Open Access Journals (Sweden)

    Milenković Pavle

    2015-01-01

    Full Text Available This paper discusses the connection between categories of space in music, music production and lifestyles. The relations between the symbolic space of social connections and musical contents in the social space of various status interactions is complex and contradictory. Category of space in the music exists in four forms. Categories of space in the description of the experience of the musical works, as well as in the way of music production (spacing are the integral part of the special way of consumption of these works (home Hi-Fi, and represent the social status, ways of cultural consumption and habitus in general.

  4. Study on Space Audit Assessment Criteria for Public Higher Education Institution in Malaysia: Space Capacity Assessment

    Directory of Open Access Journals (Sweden)

    Wan Hamdan Wan Samsul Zamani

    2016-01-01

    Full Text Available The aim of this study is to measure the capacity rate of learning space based on the as-built drawing provided by the institutions or if the as-built drawing is missing, the researcher have to prepare measured drawing as per actual on site. The learning space Capacity Index is developed by analyzing the space design in as-built drawing or measured drawing and the list of learning spaces available at the institution. The Capacity Index is classified according to the level of Usable Floor Area (UFA and Occupancy Load (OL according to learning space design capacity. The classification of Capacity Index is demonstrated through linguistic value and the color-coded key. From the said index, the institution can easily identify whether the existing learning space is currently best used or vice versa and standard space planning compliance in Malaysia Public Higher Education Institutions. The data will assist the management to clarify whether to maximize the use of existing space or to request for new learning space.

  5. 14 CFR 1204.505 - Delegation of authority to execute certificates of full faith and credit.

    Science.gov (United States)

    2010-01-01

    ... certificates of full faith and credit. 1204.505 Section 1204.505 Aeronautics and Space NATIONAL AERONAUTICS AND... Delegation of authority to execute certificates of full faith and credit. (a) Scope. This section designates... certificates of full faith and credit (Office of the Administrator section of NASA Form 955) certifying the...

  6. Noncommutative Phase Spaces by Coadjoint Orbits Method

    Directory of Open Access Journals (Sweden)

    Ancille Ngendakumana

    2011-12-01

    Full Text Available We introduce noncommutative phase spaces by minimal couplings (usual one, dual one and their mixing. We then realize some of them as coadjoint orbits of the anisotropic Newton-Hooke groups in two- and three-dimensional spaces. Through these constructions the positions and the momenta of the phase spaces do not commute due to the presence of a magnetic field and a dual magnetic field.

  7. PROJECT-SPECIFIC TYPE A VERIFICATION FOR THE HIGH FLUX BEAM REACTOR UNDERGROUND UTILITIES REMOVAL PHASE 2 D/F WASTE LINE REMOVAL, BROOKHAVEN NATIONAL LABORATORY UPTON, NEW YORK

    International Nuclear Information System (INIS)

    Weaver, P.C.

    2010-01-01

    Oak Ridge Institute for Science and Education (ORISE) has reviewed the project documentation and data for the High Flux Beam Reactor (HFBR) Underground Utilities removal Phase 2; the D/F Waste Line removal at Brookhaven National Laboratory (BNL) in Upton, New York. The Brookhaven Survey Group (BSG) has completed removal and performed the final status survey (FSS) of the D/F Waste Line that provided the conduit for pumping waste from Building 750 to Building 801. Sample results have been submitted as required to demonstrate that the cleanup goals of 15 mrem/yr above background to a resident in 50 years have been met. Four rounds of sampling, from pre-excavation to final status survey (FSS), were performed as specified in the Field Sampling Plan (FSP) (BNL 2010a). It is the policy of the US Departmental of Energy (DOE) to perform independent verifications of decontamination and decomissioning activities conducted at DOE facilities. ORISE has been designated as the organization responsible for this task at the HFBR. ORISE together with DOE determined that a Type A verification of the D/F Waste Line was appropriate based on its method of construction and upon the minimal potential for residual radioactivity in the area. The removal of underground utilities is being performed in three stages in the process to decommission the HFBR facility and support structures. Phase 2 of this project included the grouting and removal of 1100 feet of 2-inch pipe and 640 feet of 4-inch pipe that served as the D/F Waste Line. Based on the pre-excavation sample results of the soil overburden, the potential for contamination of the soil surrounding the pipe is minimal (BNL 2010a). ORISE reviewed the BNL FSP and identified comments for consideration (ORISE 2010). BNL prepared a revised FSP that addressed each ORISE comment adequately (BNL 2010a). ORISE referred to the revised Phase 2 D/F Waste Line removal FSP FSS data to conduct the Type A verification and determine whether the intent odf

  8. Boundedness and compactness of a new product-type operator from a general space to Bloch-type spaces

    Directory of Open Access Journals (Sweden)

    Stevo Stević

    2016-09-01

    Full Text Available Abstract We characterize the boundedness and compactness of a product-type operator, which, among others, includes all the products of the single composition, multiplication, and differentiation operators, from a general space to Bloch-type spaces. We also give some upper and lower bounds for the norm of the operator.

  9. Through the lens of a space tourist

    Directory of Open Access Journals (Sweden)

    Julia Tcharfas

    2015-11-01

    Full Text Available This essay attempts to contextualise the experience and documentation of the world’s first space tourist, a multi-millionaire American businessman Dennis Tito, who vacationed on the International Space Station in 2001. The essay brings together two parallel elements of this historical event: the political transformation of the Russian space programme which made the private flight possible and the cultural significance and impact of the event. The first space tourist is both a direct product of the newly commercialised space programme and a reflection of a new worldview, with new values and expectations.

  10. Isomorphism Theorem on Vector Spaces over a Ring

    Directory of Open Access Journals (Sweden)

    Futa Yuichi

    2017-10-01

    Full Text Available In this article, we formalize in the Mizar system [1, 4] some properties of vector spaces over a ring. We formally prove the first isomorphism theorem of vector spaces over a ring. We also formalize the product space of vector spaces. ℤ-modules are useful for lattice problems such as LLL (Lenstra, Lenstra and Lovász [5] base reduction algorithm and cryptographic systems [6, 2].

  11. Fenugreek Seed Powder Nullified Aluminium Chloride Induced Memory Loss, Biochemical Changes, Aβ Burden and Apoptosis via Regulating Akt/GSK3β Signaling Pathway.

    Directory of Open Access Journals (Sweden)

    Asokan Prema

    Full Text Available Alzheimer's disease (AD is the most common form of dementia that mainly affects the cognitive functions of the aged populations. Trigonella foenum-graecum (L. (fenugreek, a traditionally well utilized medicinal plant ubiquitously used as one of the main food additive worldwide, is known to have numerous beneficial health effects. Fenugreek seed extract could be able to inhibit the activity of acetylcholinesterase (AChE, a key enzyme involved in the pathogenesis of AD, and further shown to have anti-parkinsonic effect. The present study was aimed to explore the neuroprotective effect of fenugreek seed powder (FSP against aluminium chloride (AlCl3 induced experimental AD model. Administration of germinated FSP (2.5, 5 and 10% mixed with ground standard rat feed protected AlCl3 induced memory and learning impairments, Al overload, AChE hyperactivity, amyloid β (Aβ burden and apoptosis via activating Akt/GSK3β pathway. Our present data could confirm the neuroprotective effect of fenugreek seeds. Further these results could lead a possible therapeutics for the management of neurodegenerative diseases including AD in future.

  12. An LRR/malectin receptor-like kinase mediates resistance to non-adapted and adapted powdery mildew fungi in barley and wheat

    Directory of Open Access Journals (Sweden)

    Jeyaraman Rajaraman

    2016-12-01

    Full Text Available Pattern recognition receptors (PRRs belonging to the multigene family of receptor-like kinases (RLKs are the sensing devices of plants for microbe- or pathogen-associated molecular patterns released from microbial organisms. Here we describe Rnr8 (for required for nonhost resistance 8 encoding HvLEMK1, a LRR-malectin domain-containing transmembrane RLK that mediates nonhost resistance of barley to the non-adapted wheat powdery mildew fungus Blumeria graminis f.sp. tritici. Transgenic barley lines with silenced HvLEMK1 allow entry and colony growth of the non-adapted pathogen, although sporulation was reduced and final colony size did not reach that of the adapted barley powdery mildew fungus Blumeria graminis f.sp. hordei. Transient expression of the barley or wheat LEMK1 genes enhanced resistance in wheat to the adapted wheat powdery mildew fungus while expression of the same genes did not protect barley from attack by the barley powdery mildew fungus. The results suggest that HvLEMK1 is a factor mediating nonhost resistance in barley and quantitative host resistance in wheat to the wheat powdery mildew fungus.

  13. Analysis of a Mouse Skin Model of Tuberous Sclerosis Complex.

    Directory of Open Access Journals (Sweden)

    Yanan Guo

    Full Text Available Tuberous Sclerosis Complex (TSC is an autosomal dominant tumor suppressor gene syndrome in which patients develop several types of tumors, including facial angiofibroma, subungual fibroma, Shagreen patch, angiomyolipomas, and lymphangioleiomyomatosis. It is due to inactivating mutations in TSC1 or TSC2. We sought to generate a mouse model of one or more of these tumor types by targeting deletion of the Tsc1 gene to fibroblasts using the Fsp-Cre allele. Mutant, Tsc1ccFsp-Cre+ mice survived a median of nearly a year, and developed tumors in multiple sites but did not develop angiomyolipoma or lymphangioleiomyomatosis. They did develop a prominent skin phenotype with marked thickening of the dermis with accumulation of mast cells, that was minimally responsive to systemic rapamycin therapy, and was quite different from the pathology seen in human TSC skin lesions. Recombination and loss of Tsc1 was demonstrated in skin fibroblasts in vivo and in cultured skin fibroblasts. Loss of Tsc1 in fibroblasts in mice does not lead to a model of angiomyolipoma or lymphangioleiomyomatosis.

  14. Sp. Radicis-Lycopersici Using Mixture of Vegetable and Posidonia oceanica Compost

    Directory of Open Access Journals (Sweden)

    S. Kouki

    2012-01-01

    Full Text Available A compost of vegetable waste and Posidonia oceanica mixture (70 : 30% vol : vol was tested in vitro and in vivo for its efficacy against Fusarium oxysporum f.sp radicis-lycopersici (Forl, the causal agent of Fusarium wilt of Tomato (Lycopersicon esculentum cv. chourouk.The incorporation of non-sterilized VPC in the culture medium showed potent antifungal activity against Forl and complete inhibition of mycelium growth was observed for all the tested compost rates (0.5, 1, 2, 4, 6, 8, 10, 15 and 20%. However, only the highest rates (15 and 20% of a sterilized suspension of VPC were effective in preventing mycelial growth. Nine indigenous bacterial strains isolated from VPC exhibited antagonism against Forl. Based on 16S rDNA sequence analysis, the isolates were assigned to Bacillus sphaericus (B12 and BS2, Pseudomonas putida PPS7 and Burkholderia gladioli BuC16. Under green house condition, seed inoculation by B12, BS2, PP7 and BuC16 strains protected significantly tomato against Fusarium oxysporum f.sp radicis-lycopersici (Forl attacks.

  15. Integration in Orlicz-Bochner Spaces

    Directory of Open Access Journals (Sweden)

    Marian Nowak

    2018-01-01

    Full Text Available Let (Ω,Σ,μ be a complete σ-finite measure space, φ be a Young function, and X and Y be Banach spaces. Let Lφ(X denote the Orlicz-Bochner space, and Tφ∧ denote the finest Lebesgue topology on Lφ(X. We study the problem of integral representation of (Tφ∧,·Y-continuous linear operators T:Lφ(X→Y with respect to the representing operator-valued measures. The relationships between (Tφ∧,·Y-continuous linear operators T:Lφ(X→Y and the topological properties of their representing operator measures are established.

  16. Space storms as natural hazards

    Directory of Open Access Journals (Sweden)

    L. I. Dorman

    2008-04-01

    Full Text Available Eruptive activity of the Sun produces a chain of extreme geophysical events: high-speed solar wind, magnetic field disturbances in the interplanetary space and in the geomagnetic field and also intense fluxes of energetic particles. Space storms can potentially destroy spacecrafts, adversely affect astronauts and airline crew and human health on the Earth, lead to pipeline breaking, melt electricity transformers, and discontinue transmission. In this paper we deal with two consequences of space storms: (i rise in failures in the operation of railway devices and (ii rise in myocardial infarction and stroke incidences.

  17. A bottom-up approach for optimization of friction stir processing parameters; a study on aluminium 2024-T3 alloy

    International Nuclear Information System (INIS)

    Nadammal, Naresh; Kailas, Satish V.; Suwas, Satyam

    2015-01-01

    Highlights: • An experimental bottom-up approach has been developed for optimizing the process parameters for friction stir processing. • Optimum parameter processed samples were tested and characterized in detail. • Ultimate tensile strength of 1.3 times the base metal strength was obtained. • Residual stresses on the processed surface were only 10% of the yield strength of base metal. • Microstructure observations revealed fine equi-axed grains with precipitate particles at the grain boundaries. - Abstract: Friction stir processing (FSP) is emerging as one of the most competent severe plastic deformation (SPD) method for producing bulk ultra-fine grained materials with improved properties. Optimizing the process parameters for a defect free process is one of the challenging aspects of FSP to mark its commercial use. For the commercial aluminium alloy 2024-T3 plate of 6 mm thickness, a bottom-up approach has been attempted to optimize major independent parameters of the process such as plunge depth, tool rotation speed and traverse speed. Tensile properties of the optimum friction stir processed sample were correlated with the microstructural characterization done using Scanning Electron Microscope (SEM) and Electron Back-Scattered Diffraction (EBSD). Optimum parameters from the bottom-up approach have led to a defect free FSP having a maximum strength of 93% the base material strength. Micro tensile testing of the samples taken from the center of processed zone has shown an increased strength of 1.3 times the base material. Measured maximum longitudinal residual stress on the processed surface was only 30 MPa which was attributed to the solid state nature of FSP. Microstructural observation reveals significant grain refinement with less variation in the grain size across the thickness and a large amount of grain boundary precipitation compared to the base metal. The proposed experimental bottom-up approach can be applied as an effective method for

  18. Validation Hydrodynamic Models of Three Topological Models of Secondary Facultative Ponds

    OpenAIRE

    Aponte-Reyes Alxander

    2014-01-01

    A methodology was developed to analyze boundary conditions, the size of the mesh and the turbulence of a mathematical model of CFD, which could explain hydrodynamic behavior on facultative stabilization ponds, FSP, built to pilot scale: conventional pond, CP, baffled pond, BP, and baffled-mesh pond, BMP. Models dispersion studies were performed in field for validation, taking samples into and out of the FSP, the information was used to carry out CFD model simulations of the three topologies. ...

  19. Comparison of corrosion behaviour of friction stir processed and laser melted AA 2219 aluminium alloy

    International Nuclear Information System (INIS)

    Surekha, K.; Murty, B.S.; Prasad Rao, K.

    2011-01-01

    Highlights: → Poor corrosion resistance of AA 2219 can be improved by surface treatments. → FSP and LM leads to dissolution of second phase particles. → No literature available on comparison of corrosion behaviour after FSP and LM. → The study implies FSP is as good as LM in improving the corrosion resistance of AA 2219. -- Abstract: Dissolution of second phase particles (CuAl 2 ) present in AA 2219 aluminium improves the corrosion resistance of the alloy. Two surface treatment techniques, viz., solid state friction stir processing and fusion based laser melting lead to the reduction in CuAl 2 content and the effect of these processes on the corrosion behaviour of the alloy is compared in this study. Potentiodynamic polarization and electrochemical impedance spectroscopy tests were carried out to compare corrosion behaviour. The corrosion resistance achieved by friction stir processing is comparable to that obtained by the laser melting technique.

  20. Microstructures and mechanical properties of Al/Al2O3 surface nano-composite layer produced by friction stir processing

    International Nuclear Information System (INIS)

    Shafiei-Zarghani, A.; Kashani-Bozorg, S.F.; Zarei-Hanzaki, A.

    2009-01-01

    In this study, a new processing technique, friction stir processing (FSP) was attempted to incorporate nano-sized Al 2 O 3 into 6082 aluminum alloy to form particulate composite surface layer. Samples were subjected to various numbers of FSP passes from one to four, with and without Al 2 O 3 powder. Microstructural observations were carried out by employing optical and scanning electron microscopy (SEM) of the cross sections both parallel and perpendicular to the tool traverse direction. Mechanical properties include microhardness and wear resistance, were evaluated in detail. The results show that the increasing in number of FSP passes causes a more uniform in distribution of nano-sized alumina particles. The microhardness of the surface improves by three times as compared to that of the as-received Al alloy. A significant improvement in wear resistance in the nano-composite surfaced Al is observed as compared to the as-received Al

  1. Transition of Japanese commercial space: What has been lost from the commercial space?

    Directory of Open Access Journals (Sweden)

    Fujioka Tatsuma

    2016-12-01

    Full Text Available This paper compares the types of two commercial spaces in modern Japan, shopping mall and “traditional” shopping district called Shotengai, from the viewpoint of commercial space as the third space in the city. Particularly in the discourse of commercial spaces in Japan, "shopping district" has been portrayed tied to nostalgia. Therefore, the transition of commercial space is always accompanied by a discourse of the" Lost." However, there is no unified opinion about what's been lost in the process of this transition in fact. In this paper, we extract the social category by considering focus on discourse for both places. As a specific object I use to target the research papers and journal articles in Japan. Because these documents are discussed by distinct main thesis and based on specific data, I adopt these materials. After extraction of social category, through the comparison of the two discourses, I reveal what kind of nature is the "Lost" at the commercial spaces as the third place in the city. I also discuss how this change is related the changes in Japanese social relationship and community.

  2. Architecture of (impossibilities: Robert Smithson's expositive spaces

    Directory of Open Access Journals (Sweden)

    Bráulio Romeiro

    2012-06-01

    Full Text Available This work investigates the North American artist Robert Smithson’s considerations on traditional expositive spaces: the museum and art gallery, as well as unusual and unexplored spaces by art up to that time. Looking through his texts we notice some enhanced perspectives and reset others, increasing limitation set on White Cube’s abstract and neutral quality and the substantiation on ideologies behind of these spaces manifestation.

  3. An automated full-symmetry Patterson search method

    International Nuclear Information System (INIS)

    Rius, J.; Miravitlles, C.

    1987-01-01

    A full-symmetry Patterson search method is presented that performs a molecular coarse rotation search in vector space and orientation refinement using the σ function. The oriented molecule is positioned using the fast translation function τ 0 , which is based on the automated interpretation of τ projections using the sum function. This strategy reduces the number of Patterson-function values to be stored in the rotation search, and the use of the τ 0 function minimizes the required time for the development of all probable rotation search solutions. The application of this method to five representative test examples is shown. (orig.)

  4. Combining the Complete Active Space Self-Consistent Field Method and the Full Configuration Interaction Quantum Monte Carlo within a Super-CI Framework, with Application to Challenging Metal-Porphyrins.

    Science.gov (United States)

    Li Manni, Giovanni; Smart, Simon D; Alavi, Ali

    2016-03-08

    A novel stochastic Complete Active Space Self-Consistent Field (CASSCF) method has been developed and implemented in the Molcas software package. A two-step procedure is used, in which the CAS configuration interaction secular equations are solved stochastically with the Full Configuration Interaction Quantum Monte Carlo (FCIQMC) approach, while orbital rotations are performed using an approximated form of the Super-CI method. This new method does not suffer from the strong combinatorial limitations of standard MCSCF implementations using direct schemes and can handle active spaces well in excess of those accessible to traditional CASSCF approaches. The density matrix formulation of the Super-CI method makes this step independent of the size of the CI expansion, depending exclusively on one- and two-body density matrices with indices restricted to the relatively small number of active orbitals. No sigma vectors need to be stored in memory for the FCIQMC eigensolver--a substantial gain in comparison to implementations using the Davidson method, which require three or more vectors of the size of the CI expansion. Further, no orbital Hessian is computed, circumventing limitations on basis set expansions. Like the parent FCIQMC method, the present technique is scalable on massively parallel architectures. We present in this report the method and its application to the free-base porphyrin, Mg(II) porphyrin, and Fe(II) porphyrin. In the present study, active spaces up to 32 electrons and 29 orbitals in orbital expansions containing up to 916 contracted functions are treated with modest computational resources. Results are quite promising even without accounting for the correlation outside the active space. The systems here presented clearly demonstrate that large CASSCF calculations are possible via FCIQMC-CASSCF without limitations on basis set size.

  5. Probabilistic full waveform inversion based on tectonic regionalization - development and application to the Australian upper mantle

    NARCIS (Netherlands)

    Käufl, P.; Fichtner, A.; Igel, H.

    2013-01-01

    We present a first study to investigate the feasibility of a probabilistic 3-D full waveform inversion based on spectral-element simulations of seismic wave propagation and Monte Carlo exploration of the model space. Through a tectonic regionalization we reduce the dimension of the model space to

  6. Cognitive Neuroscience in Space

    Directory of Open Access Journals (Sweden)

    Gabriel G. De la Torre

    2014-07-01

    Full Text Available Humans are the most adaptable species on this planet, able to live in vastly different environments on Earth. Space represents the ultimate frontier and a true challenge to human adaptive capabilities. As a group, astronauts and cosmonauts are selected for their ability to work in the highly perilous environment of space, giving their best. Terrestrial research has shown that human cognitive and perceptual motor performances deteriorate under stress. We would expect to observe these effects in space, which currently represents an exceptionally stressful environment for humans. Understanding the neurocognitive and neuropsychological parameters influencing space flight is of high relevance to neuroscientists, as well as psychologists. Many of the environmental characteristics specific to space missions, some of which are also present in space flight simulations, may affect neurocognitive performance. Previous work in space has shown that various psychomotor functions degrade during space flight, including central postural functions, the speed and accuracy of aimed movements, internal timekeeping, attentional processes, sensing of limb position and the central management of concurrent tasks. Other factors that might affect neurocognitive performance in space are illness, injury, toxic exposure, decompression accidents, medication side effects and excessive exposure to radiation. Different tools have been developed to assess and counteract these deficits and problems, including computerized tests and physical exercise devices. It is yet unknown how the brain will adapt to long-term space travel to the asteroids, Mars and beyond. This work represents a comprehensive review of the current knowledge and future challenges of cognitive neuroscience in space from simulations and analog missions to low Earth orbit and beyond.

  7. Topos of the cosmic space in science fiction

    Directory of Open Access Journals (Sweden)

    Poutilo Oleg Olegovich

    2015-09-01

    Full Text Available The article examines the forms of cosmic space in science fiction, its characteristics and main trends of evolution. Cosmic space is seen as a dichotomy of “our” and “their”, though their interaction is complicated and full interiorization is impossible. The specificity of the described cosmic space is the absence of the traditional system of coordinates associated with the sides of the world. Authors have to resort to the use of “map-route”, describing the journey sequentially, from the point of view of a moving person. In this regard, in recent years there has been a tendency to reduce the role of images of cosmic space in science fiction novels. Their appearance in the works becomes a kind of stamp, a concession to the classical traditions of the genre. Once popular genres of strict science fiction or space opera inferior position to the other, recreating a far more convincing picture of the probable future of humanity - cyberpunk dystopia and post-apocalyptic fiction.

  8. Space Human Activity and Education of Spiritual Persons of Space Other Planetary Future in the Third Millennium

    Directory of Open Access Journals (Sweden)

    Natalia Polischuk

    2014-07-01

    Full Text Available In clause an object of research are prospects of the further space human activity and education of spiritual persons аnother the planetary future, knowledge of the Universe and social progress of a human civilization during an anthropological space age. Proves, that only in unity of reason and spirituality of mankind probably space other planetary future of a human civilization. It is found out, that the strategic purpose of philosophy of formation – is a formation of space other planetary type of the person as image of the person of the future. The concept of the perfect high spiritual moral person as image of the person of space other planetary future which education system and philosophy of formation should bring up already today is offered. Also new anthropological space concepts which can be used in philosophy of formation and to space science are entered.

  9. SPACE IN JAPANESE ZEN BUDDHIST ARCHITECTURE

    Directory of Open Access Journals (Sweden)

    Antariksa Antariksa

    2001-01-01

    Full Text Available The beginning in the medieval period the ideas "emptiness" and "nothingness" in Buddhist doctrine influences over the Japanese. Space in Japanese architecture (kukan, as a empty place. This word originally stood for a "hole in the ground", and in on present meaning of a "hole in the universe", or "sky". The ancient Japanese divided space vertically into two parts, sora (sky and ame or ama (heaven. In the concept of emptiness both of this above it can be said is a part of space. This paper will tries to explain and discusses about the meaning of space in Japanese Zen Buddhist architecture.

  10. ON NEW CESARO-ORLICZ DOUBLE DIFFERENCE SEQUENCE SPACE

    Directory of Open Access Journals (Sweden)

    OGUZ OGUR

    2014-10-01

    Full Text Available The aim of this paper is to introduce the Cesaro-Orlicz double difference sequence space Ces_M^{(2}(△, p. We study some topological properties of this space and give some inclusion relations

  11. Erasing Space from Places Brandscapes, Art and the (devalorisation of the Olympic Space

    Directory of Open Access Journals (Sweden)

    Andrea Pavoni

    2010-12-01

    Full Text Available Beyond use, exchange and sign value, current marketing practices have consistently turned on notions of contextual fruition, experience, performativity, affective spaces, atmospheres. The logic of the experience economy has quickly spilled over other realms: architecture and design, security and control, urban planning and law. As the language of brand overflows the marketing jargon to apply to urban events1 and renewal projects, the notion of brandscape becomes increasingly relevant to indicate the institutional engineering of material and immaterial, visible and invisible spaces. Brandscaping is a “more or less successful institutional attempt to inscribe spaces and their inhabitants in their own terms” (Ball and Wood, 2008, in other words, to freeze space, to capture and tame its multiplicity, to make it static, organised, predictable, not in the cumbersome, panoptical way, but rather through affective strategies, by producing, managing and securing “atmospherically enriched experiences” (Klingmann, 2007: 6.

  12. New Inner Product Quasilinear Spaces on Interval Numbers

    Directory of Open Access Journals (Sweden)

    Hacer Bozkurt

    2016-01-01

    Full Text Available Primarily we examine the new example of quasilinear spaces, namely, “IRn interval space.” We obtain some new theorems and results related to this new quasilinear space. After giving some new notions of quasilinear dependence-independence and basis on quasilinear functional analysis, we obtain some results on IRn interval space related to these concepts. Secondly, we present Is,Ic0,Il∞, and Il2 quasilinear spaces and we research some algebraic properties of these spaces. We obtain some new results and provide an important contribution to the improvement of quasilinear functional analysis.

  13. Generalized 2-vector spaces and general linear 2-groups

    OpenAIRE

    Elgueta, Josep

    2008-01-01

    In this paper a notion of {\\it generalized 2-vector space} is introduced which includes Kapranov and Voevodsky 2-vector spaces. Various kinds of generalized 2-vector spaces are considered and examples are given. The existence of non free generalized 2-vector spaces and of generalized 2-vector spaces which are non Karoubian (hence, non abelian) categories is discussed, and it is shown how any generalized 2-vector space can be identified with a full subcategory of an (abelian) functor category ...

  14. On Separation Axioms in an Ordered Neutrosophic Bitopological Space

    Directory of Open Access Journals (Sweden)

    R. Narmada Devi

    2017-12-01

    Full Text Available In this paper we introduce the concept of a new class of an ordered neutrosophic bitopological spaces. Besides giving some interesting properties of these spaces. We also prove analogues of Uryshon’s lemma and Tietze extension theorem in an ordered neutrosophic bitopological spaces.

  15. Understanding and improving the efficiency of full configuration interaction quantum Monte Carlo.

    Science.gov (United States)

    Vigor, W A; Spencer, J S; Bearpark, M J; Thom, A J W

    2016-03-07

    Within full configuration interaction quantum Monte Carlo, we investigate how the statistical error behaves as a function of the parameters which control the stochastic sampling. We define the inefficiency as a measure of the statistical error per particle sampling the space and per time step and show there is a sizeable parameter regime where this is minimised. We find that this inefficiency increases sublinearly with Hilbert space size and can be reduced by localising the canonical Hartree-Fock molecular orbitals, suggesting that the choice of basis impacts the method beyond that of the sign problem.

  16. Understanding and improving the efficiency of full configuration interaction quantum Monte Carlo

    Energy Technology Data Exchange (ETDEWEB)

    Vigor, W. A.; Bearpark, M. J. [Department of Chemistry, Imperial College London, Exhibition Road, London SW7 2AZ (United Kingdom); Spencer, J. S. [Department of Physics, Imperial College London, Exhibition Road, London SW7 2AZ (United Kingdom); Department of Materials, Imperial College London, Exhibition Road, London SW7 2AZ (United Kingdom); Thom, A. J. W. [Department of Chemistry, Imperial College London, Exhibition Road, London SW7 2AZ (United Kingdom); University Chemical Laboratory, Lensfield Road, Cambridge CB2 1EW (United Kingdom)

    2016-03-07

    Within full configuration interaction quantum Monte Carlo, we investigate how the statistical error behaves as a function of the parameters which control the stochastic sampling. We define the inefficiency as a measure of the statistical error per particle sampling the space and per time step and show there is a sizeable parameter regime where this is minimised. We find that this inefficiency increases sublinearly with Hilbert space size and can be reduced by localising the canonical Hartree–Fock molecular orbitals, suggesting that the choice of basis impacts the method beyond that of the sign problem.

  17. Experiencing the relationship between architectural space and the major space phobias

    Directory of Open Access Journals (Sweden)

    Dana Pop

    2015-12-01

    Full Text Available During the past decades there was a noticeable effervescence characterising the space-psychology related studies. These studies established a connection between the characteristics of the environment and behaviour. Thus, this paper would like to join this field of research. Consequently, the first issue raised is whether architecture is about a space in itself, or whether it is about perception, of a mental representation. A second issue is whether a space has qualities of its own, or whether its characteristics depend on the subjectivity of the perceptual process. This hypothesis generated an entire field of research, which disputes the differences between space and place. The last issue would be the role played by architecture in the context of the space-place-perception discussion. Thus, architecture finds itself in the middle of this debate, being the instrument which carves the environment we inhabit. In order to provide a practical answer to this last question, the paper bases its conclusions on the results obtained through an experiment. This experiment tested certain situations in which the natural adaptation process has been short-circuited. These are phobic reactions. Thus, the paper wishes to lay the first theoretical ‘brick’ at the foundation of an interdisciplinary research project between architecture, psychology, sociology and virtual reality.

  18. Space space space

    CERN Document Server

    Trembach, Vera

    2014-01-01

    Space is an introduction to the mysteries of the Universe. Included are Task Cards for independent learning, Journal Word Cards for creative writing, and Hands-On Activities for reinforcing skills in Math and Language Arts. Space is a perfect introduction to further research of the Solar System.

  19. Diffusion with space memory modelled with distributed order space fractional differential equations

    Directory of Open Access Journals (Sweden)

    M. Caputo

    2003-06-01

    Full Text Available Distributed order fractional differential equations (Caputo, 1995, 2001; Bagley and Torvik, 2000a,b were fi rst used in the time domain; they are here considered in the space domain and introduced in the constitutive equation of diffusion. The solution of the classic problems are obtained, with closed form formulae. In general, the Green functions act as low pass fi lters in the frequency domain. The major difference with the case when a single space fractional derivative is present in the constitutive equations of diffusion (Caputo and Plastino, 2002 is that the solutions found here are potentially more fl exible to represent more complex media (Caputo, 2001a. The difference between the space memory medium and that with the time memory is that the former is more fl exible to represent local phenomena while the latter is more fl exible to represent variations in space. Concerning the boundary value problem, the difference with the solution of the classic diffusion medium, in the case when a constant boundary pressure is assigned and in the medium the pressure is initially nil, is that one also needs to assign the fi rst order space derivative at the boundary.

  20. Full particle simulations of quasi-perpendicular shocks

    Science.gov (United States)

    Lembège, B.

    This tutorial-style review is dedicated to the different strategies and constraints used for analysing the dynamics of a collisionless shocks with full particle simulations. Main results obtained with such simulations can be found in published materials (recent references are provided in this text); these will be only quoted herein in order to illustrate a few aspects of these simulations. Thanks to the large improvement of super computers, full particle simulations reveal to be quite helpful for analyzing in details the dynamics of collisionless shocks. The main characteristics of such codes can be shortly reminded as follows: one resolves the full set of Poisson and Maxwell's equations without any approximation. Two approaches are commonly used for resolving this equation's set, more precisely the space derivatives: (i) the finite difference approach and (ii) the use of FFT's (Fast Fourier Transform). Two advantages of approach (ii) are that FFT's are highly optimized in supercomputers libraries, and these allow to separate all fields components into two groups: the longitudinal electrostatic component El (solution of Poisson equation) and the transverse electromagnetic components Et and Bt solutions of the Maxwell's equations (so called "fields pusher"). Such a separation is quite helpful in the post processing stage necessary for the data analysis, as will be explained in the presentation. both ions and electrons populations are treated as individual finite-size particles and suffer the effects of all fields via the Lorentz force, so called "particle pusher", which is applied to each particle. Because of the large number of particles commonly used, the particle pusher represents the most expensive part of the calculations on which most efforts of optimisation needs to be performed (in terms of "vectorisation" or of "parallelism"). Relativistic effects may be included in this force via the use of particle momemtum. Each particle has three velocity components (vx

  1. Accuracy of probing attachment levels using a new computerized cemento-enamel junction probe.

    Science.gov (United States)

    Deepa, R; Prakash, Shobha

    2012-01-01

    The assessment of clinical attachment level (CAL) represents the gold standard for diagnosing and monitoring periodontal disease. The aim of the present study was to evaluate the performance of the newly introduced cemento-enamel junction (CEJ) probe in detecting CAL, using CEJ as a fixed reference point, and to compare the CEJ probe with the Florida stent probe (FSP) as well as with a standard manual probe, University of North Carolina-15 (UNC-15). Three examiners recorded the probing attachment level in 384 sites in case group (chronic periodontitis), and in 176 sites, in control group (healthy periodontal status), using the three probes. Subjects included both the sexes and ranged from 35 to 45 years. The experimental design was structured to balance the intra- and inter-examiner consistency at the same site during the two visits. CEJ probe showed higher intra-and inter-examiner consistency over both FSP and UNC-15 in both the case and control groups. Frequency distribution of differences of various magnitudes of repeated measurements ≤1 mm was in the higher range of 86.8% to 87.5% for CEJ probe. The FSP was more reproducible than UNC-15 in detecting relative attachment level (RAL). CEJ automated probe was found to have greatest potential for accuracy and consistency in detecting CAL than FSP and UNC-15. The automated probes appeared to be more reproducible than manual probes.

  2. A randomized controlled trial of two primary school intervention strategies to prevent early onset tobacco smoking.

    Science.gov (United States)

    Storr, Carla L; Ialongo, Nicholas S; Kellam, Sheppard G; Anthony, James C

    2002-03-01

    In this article, we examine the impact of two universal, grade 1 preventive interventions on the onset of tobacco smoking as assessed in early adolescence. The classroom-centered (CC) intervention was designed to reduce the risk for tobacco smoking by enhancing teachers' behavior management skills in first grade and, thereby, reducing child attention problems and aggressive and shy behavior-known risk behaviors for later substance use. The family-school partnership (FSP) intervention targeted these early risk behaviors via improvements in parent-teacher communication and parents' child behavior management strategies. A cohort of 678 urban, predominately African-American, public school students were randomly assigned to one of three Grade 1 classrooms at entrance to primary school (age 6). One classroom featured the CC intervention, a second the FSP intervention, and the third served as a control classroom. Six years later, 81% of the students completed audio computer-assisted self-interviews. Relative to controls, a modest attenuation in the risk of smoking initiation was found for students who had been assigned to either the CC or FSP intervention classrooms (26% versus 33%) (adjusted relative risk for CC/control contrast=0.57, 95% confidence interval (CI), 0.34-0.96; adjusted relative risk for FSP/control contrast=0.69, 95% CI, 0.50-0.97). Results lend support to targeting the early antecedent risk behaviors for tobacco smoking.

  3. Astronautics degrees for the space industry

    Science.gov (United States)

    Gruntman, M.; Brodsky, R. F.; Erwin, D. A.; Kunc, J. A.

    2004-01-01

    The Astronautics Program (http://astronautics.usc.edu) of the University of Southern California (USC) offers a full set of undergraduate and graduate degree programs in Aerospace Engineering with emphasis in Astronautics. The Bachelor of Science and Master of Science degree programs in Astronautics combine basic science and engineering classes with specialized classes in space technology. The Certificate in Astronautics targets practicing engineers and scientists who enter space-related fields and/or who want to obtain training in specific space-related areas. Many specialized graduate classes are taught by adjunct faculty working at the leading space companies. The Master of Science degree and Certificate are available entirely through the USC Distance Education Network (DEN). Today, the Internet allows us to reach students anywhere in the world through webcasting. The majority of our graduate students, as well as those pursuing the Certificate, work full time as engineers in the space industry and government research and development centers while earning their degrees. The new world of distance learning presents new challenges and opens new opportunities. Distance learning, and particularly the introduction of webcasting, transform the organization of the graduate program and class delivery. We describe in detail the program's academic focus, student reach, and structure of program components. Program development is illustrated by the student enrollment dynamics and related industrial trends; the lessons learned emphasize the importance of feedback from the students and from the space industry.

  4. Free-space communication with over 100 spatial modes

    CSIR Research Space (South Africa)

    Rosales-Guzmán, C

    2016-10-01

    Full Text Available Congress 2016: Advanced Solid State Lasers (ASSL); Applications of Lasers for Sensing and Free Space Communications (LS&C), 30 October - 3 November 2016, Boston, Massachusetts, United States Free-space communication with over 100 spatial modes...

  5. Arithmetic convergent sequence space defined by modulus function

    Directory of Open Access Journals (Sweden)

    Taja Yaying

    2019-10-01

    Full Text Available The aim of this article is to introduce the sequence spaces $AC(f$ and $AS(f$ using arithmetic convergence and modulus function, and study algebraic and topological properties of this space, and certain inclusion results.

  6. A full feature FASTBUS slave interface using semicustom integrated circuits

    International Nuclear Information System (INIS)

    Skegg, R.; Daviel, A.; Downing, R.

    1986-01-01

    Two semi-custom integrated circuits have been designed and manufactured which enable the construction of a full featured FASTBUS slave interface without the need for a detailed knowledge of the FASTBUS protocol. A relatively small amount of board space is required compared to implementations using conventional circuits. The semi-custom devices are described in detail, and an application example is given. (orig.)

  7. Preliminary Sensorimotor and Cardiovascular Results from the Joint Russian and U.S. Pilot Field Test with Planning for the Full Field Test Beginning with the Year Long Intenational Space Station

    Science.gov (United States)

    Reschke, M. F.; Kozlovskaya, I. B.; Tomilovskaya, E. S.; Bloomberg, J. J.; Platts, S. H.; Rukavishnikov, I. V.; Fomina, E. V.; Stenger, M. B.; Lee, S. M. C.; Wood, S. J.; hide

    2014-01-01

    Ongoing collaborative research efforts between NASA's Neuroscience and Cardiovascular Laboratories, and the Institute of Biomedical Problems' (IBMP) Sensory-Motor and Countermeasures Laboratories have been measuring functional sensorimotor, cardiovascular and strength responses following bed rest, dry immersion, short duration (Space Shuttle) and long duration (Mir and International Space Station) space flights. While the unloading paradigms associated with dry immersion and bed rest does serve as acceptable flight analogs, testing of crew responses following the long duration flights previously has not been possible until a minimum of 24 hours after landing. As a result, it is not possible to estimate the nonlinear trend of the early (testing at landing site. By joint agreement, this research effort has been identified as the functional Field Test (FT). For practical reasons the FT has been divided into two phases: the full FT and a preliminary pilot version (PFT) of the FT that is reduced in both length and scope. The primary goal of this research is to determine functional abilities in long duration space flight crews beginning as soon after landing as possible (test in conjunction with postural ataxia testing (quiet stance sway) as well as cardiovascular responses during other functional tasks. In addition to the immediate post-landing collection of data for the full FT, postflight data will be acquired at a minimum of one to three more other times within the 24 hr following landing and continue until functional sensorimotor and cardiovascular responses have returned to preflight normative values. The PFT represents a single trial run comprised of jointly agreed upon subset of tests from the full FT and relies heavily on IBMP's Sensory-Motor and Countermeasures Laboratories for content and implementation. The PFT was first conducted following the September 2013 landing of the Soyuz spacecraft (34S) and again following the landing of Soyuz 35S in November

  8. Computable Frames in Computable Banach Spaces

    Directory of Open Access Journals (Sweden)

    S.K. Kaushik

    2016-06-01

    Full Text Available We develop some parts of the frame theory in Banach spaces from the point of view of Computable Analysis. We define computable M-basis and use it to construct a computable Banach space of scalar valued sequences. Computable Xd frames and computable Banach frames are also defined and computable versions of sufficient conditions for their existence are obtained.

  9. Space-Time Disarray and Visual Awareness

    Directory of Open Access Journals (Sweden)

    Jan Koenderink

    2012-04-01

    Full Text Available Local space-time scrambling of optical data leads to violent jerks and dislocations. On masking these, visual awareness of the scene becomes cohesive, with dislocations discounted as amodally occluding foreground. Such cohesive space-time of awareness is technically illusory because ground truth is jumbled whereas awareness is coherent. Apparently the visual field is a construction rather than a (veridical perception.

  10. Space, Art and Transcendence

    Directory of Open Access Journals (Sweden)

    Ricardo Pinilla Burgos

    2017-09-01

    Full Text Available In the light of Heidegger’s analysis of space and art, and its link with a milestone for modern sculpture such as Eduardo Chillida, space is presented, together with time, as a fundamental element of art and especially of sculpture and architecture. Space is not a homogeneous neutral background, but an original phenomenon that compromises from the beginning the creation and the peculiar kind of transcendence to which every work of art invites us. Every work submerges us on one side in a feverish, sensitive and bodily immanence, in the mystery of the sensitive (aesthetic that we are, but aswell it takes us beyond or nearer than the conventional meanings and relations and our situation. From here, we will consider whether and how we can put the aesthetic experience of space in relation to the transcendence of which religion commonly speaks, illuminated in turn from the study of the sacred of Mircea Eliade.

  11. Report on the 19th SPACE Conference = 10. mednarodna konferenca SPACE

    Directory of Open Access Journals (Sweden)

    Rune Gulev

    2008-06-01

    Full Text Available The 19th international space (European Network for Business Studies and Languages conference that recently took place in Spain provided valuable insight into several areas of interest. Most notably, methods on how to successfully enhance the internationalization of higher learning institutions were shared through mobility and joint degrees programs. Furthermore, the conference provided an academic forum for a highly professional and earnest discourse on pertinent topics of relevance for higher learning institutions, which this year pivoted around intercultural awareness and dialogue. In sum, the space network provides a wealth of academic and administrative advantages that the academic sphere could greatly benefit from.

  12. Attractor of reaction-diffusion equations in Banach spaces

    Directory of Open Access Journals (Sweden)

    José Valero

    2001-04-01

    Full Text Available In this paper we prove first some abstract theorems on existence of global attractors for differential inclusions generated by w-dissipative operators. Then these results are applied to reaction-diffusion equations in which the Babach space Lp is used as phase space. Finally, new results concerning the fractal dimension of the global attractor in the space L2 are obtained.

  13. Pointwise convergence and Ascoli theorems for nearness spaces

    Directory of Open Access Journals (Sweden)

    Zhanbo Yang

    2009-04-01

    Full Text Available We first study subspaces and product spaces in the context of nearness spaces and prove that U-N spaces, C-N spaces, PN spaces and totally bounded nearness spaces are nearness hereditary; T-N spaces and compact nearness spaces are N-closed hereditary. We prove that N2 plus compact implies N-closed subsets. We prove that totally bounded, compact and N2 are productive. We generalize the concepts of neighborhood systems into the nearness spaces and prove that the nearness neighborhood systems are consistent with existing concepts of neighborhood systems in topological spaces, uniform spaces and proximity spaces respectively when considered in the respective sub-categories. We prove that a net of functions is convergent under the pointwise convergent nearness structure if and only if its cross-section at each point is convergent. We have also proved two Ascoli-Arzelà type of theorems.

  14. Smell, Space and Othering

    Directory of Open Access Journals (Sweden)

    Cecilia Fe L. Sta Maria

    2016-09-01

    Full Text Available Currently experiencing social shift from the rural/coastal to the urban, Matnog, Sorsogon, in the Philippines is left with markings of people who live by the coast, who are confronted by poverty, a poverty which can easily be seen in the space they occupy. The present article concerns itself less with seeing, but rather forms a spin-off from the spatial discourse to that of the smell/scent of a woman enmeshed with the space she inhabits and enabling the unfolding of the reproduction of social differences. As a way of knowing, a methodology, in this embodied qualitative research, the scent/smell becomes the agent and the space as the agency of power are both explored as a purview in cultural studies. The sense of smell as a sociocultural construction that establishes social identity and reifies and reproduces social differences is highlighted and positioned. Extrapolating from field work conducted in Matnog demonstrates that the smell of this rural space is rapidly transitioning to that of the urbane and the smell of women who inhabits that space. Through narrative poetry and the presentation of photographs and verbal analyses, olfactory identities and imprints, social differences, identity and spaces are explored, culminating in the transitional reconfiguration of poverty constructs.

  15. Space Weather Research Towards Applications in Europe

    CERN Document Server

    Lilensten, Jean

    2007-01-01

    This book shows the state of the art in Europe on a very new discipline, Space Weather. This discipline lies at the edge between science and industry. This book reflects such a position, with theoretic papers and applicative papers as well. It is divided into 5 chapters. Each chapter starts with a short introduction, which shows the coherence of a given domain. Then, 4 to 5 contributions written by the best specialists in Europe give detailed hints of a hot topic in space weather. From the reading of this book, it becomes evident that space weather is a living discipline, full of promises and already full of amazing realizations. The strength of Europe is clear through the book, but it is also clear that this discipline is world wide.

  16. 3D space analysis of dental models

    Science.gov (United States)

    Chuah, Joon H.; Ong, Sim Heng; Kondo, Toshiaki; Foong, Kelvin W. C.; Yong, Than F.

    2001-05-01

    Space analysis is an important procedure by orthodontists to determine the amount of space available and required for teeth alignment during treatment planning. Traditional manual methods of space analysis are tedious and often inaccurate. Computer-based space analysis methods that work on 2D images have been reported. However, as the space problems in the dental arch exist in all three planes of space, a full 3D analysis of the problems is necessary. This paper describes a visualization and measurement system that analyses 3D images of dental plaster models. Algorithms were developed to determine dental arches. The system is able to record the depths of the Curve of Spee, and quantify space liabilities arising from a non-planar Curve of Spee, malalignment and overjet. Furthermore, the difference between total arch space available and the space required to arrange the teeth in ideal occlusion can be accurately computed. The system for 3D space analysis of the dental arch is an accurate, comprehensive, rapid and repeatable method of space analysis to facilitate proper orthodontic diagnosis and treatment planning.

  17. The production of subject and space in video games

    Directory of Open Access Journals (Sweden)

    Altuğ Işığan

    2013-03-01

    Full Text Available Despite the dominant view that distinguishes video game space from other spatial representations as navigable space, someone who engages with the screen space of a video game must first and foremost rest at an ideal viewing spot in physical space, which is in accord with the requirements of a proper screening. In other words, one’s illusory experience of navigable space becomes possible only if one’s body in physical space occupies the visual center on which the scenographic arrangement relies in order to function.

  18. Fibonacci difference sequence spaces for modulus functions

    Directory of Open Access Journals (Sweden)

    Kuldip Raj

    2015-05-01

    Full Text Available In the present paper we introduce Fibonacci difference sequence spaces l(F, Ƒ, p, u and  l_∞(F, Ƒ, p, u by using a sequence of modulus functions and a new band matrix F. We also make an effort to study some inclusion relations, topological and geometric properties of these spaces. Furthermore, the alpha, beta, gamma duals and matrix transformation of the space l(F, Ƒ, p, u are determined.

  19. Role of the Space Station in Private Development of Space

    Science.gov (United States)

    Uhran, M. L.

    2002-01-01

    The International Space Station (ISS) is well underway in the assembly process and progressing toward completion. In February 2001, the United States laboratory "Destiny" was successfully deployed and the course of space utilization, for laboratory-based research and development (R&D) purposes, entered a new era - continuous on-orbit operations. By completion, the ISS complex will include pressurized laboratory elements from Europe, Japan, Russia and the U.S., as well as external platforms which can serve as observatories and technology development test beds serviced by a Canadian robotic manipulator. The international vision for a continuously operating, full service R&D complex in the unique environment of low-Earth orbit is becoming increasingly focused. This R&D complex will offer great opportunities for economic return as the basic research program proceeds on a global scale and the competitive advantages of the microgravity and ultravacuum environments are elucidated through empirical studies. In parallel, the ISS offers a new vantage point, both as a source for viewing of Earth and the Cosmos and as the subject of view for a global population that has grown during the dawning of the space age. In this regard, the ISS is both a working laboratory and a powerful symbol for human achievement in science and technology. Each of these aspects bears consideration as we seek to develop the beneficial attributes of space and pursue innovative approaches to expanding this space complex through private investment. Ultimately, the success of the ISS will be measured by the outcome at the end of its design lifetime. Will this incredible complex be de-orbited in a fiery finale, as have previous space platforms? Will another, perhaps still larger, space station be built through global government funding? Will the ISS ownership be transferred to a global, non-government organization for refurbishment and continuation of the mission on a privately financed basis? Steps taken

  20. Transonic control effectiveness for full and partial span elevon configurations on a 0.0165 scale model space shuttle orbiter tested in the LaRC 8-foot transonic wind tunnel (LA48)

    Science.gov (United States)

    1977-01-01

    A transonic pressure tunnel test is reported on an early version of the space shuttle orbiter (designated 089B-139) 0.0165 scale model to systematically determine both longitudinal and lateral control effectiveness associated with various combinations of inboard, outboard, and full span wing trailing edge controls. The test was conducted over a Mach number range from 0.6 to 1.08 at angles of attack from -2 deg to 23 deg at 0 deg sideslip.

  1. Fire Resistant Materials

    Science.gov (United States)

    1982-01-01

    Fire hazard is greater in atmospheres containing a high percentage of oxygen under pressure. NASA intensified its fire safety research after a 1967 Apollo fire. A chemically treated fabric called Durette developed by Monsanto Company, which will not burn or produce noxious fumes, was selected as a material for Apollo astronaut garments. Monsanto sold production rights for this material to Fire Safe Products (FSP). Durette is now used for a wide range of applications such as: sheets, attendants' uniforms in hyperbaric chambers; crew's clothing, furniture and interior walls of diving chambers operated by the U.S. Navy and other oceanographic companies and research organizations. Pyrotect Safety Equipment, Minneapolis, MN produces Durette suits for auto racers, refuelers and crew chiefs from material supplied by FSP. FSP also manufactures Durette bags for filtering gases and dust from boilers, electric generators and similar systems. Durette bags are an alternative to other felted fiber capable of operating at high temperature that cost twice as much.

  2. Diagnostic tests in Raynaud's phenomena in workers exposed to vibration: a comparative study

    DEFF Research Database (Denmark)

    Olsen, N

    1988-01-01

    Four objective tests to evaluate Raynaud's phenomena (RP) in workers exposed to handarm vibrations were applied on 23 exposed men with RP (vibration induced white finger 18, primary Raynaud's phenomenon 5), 56 exposed men without RP, and 15 male controls. Finger systolic blood pressure was measured...... greater than 0.20). The results indicate that a finger colour test may be as valuable as a FSP(0) test for diagnostic purposes. FSP(A) only indicates if a cold response is exaggerated and does not diagnose RP. The pressure measurements may further be of guidance in evaluating preventive measures...... by a cuff and strain gauge technique after combined body cooling and finger cooling during five minute ischaemia to 30 degrees, 15 degrees, and 6 degrees C. An attack of RP was detected as a zero pressure, FSP(0) test, whereas a pressure, reduced to a value below the normal 95% confidence limit at 6 degrees...

  3. PROJECT-SPECIFIC TYPE A VERIFICATION FOR THE HIGH FLUX BEAM REACTOR UNDERGROUND UTILITIES REMOVAL PHASE 3 TRENCH 5, BROOKHAVEN NATIONAL LABORATORY UPTON, NEW YORK

    International Nuclear Information System (INIS)

    Weaver, P.C.

    2010-01-01

    The Oak Ridge Institute for Science and Education (ORISE) has reviewed the project documentation and data for the High Flux Beam Reactor (HFBR) Underground Utilities removal Phase 3; Trench 5 at Brookhaven National Laboratory (BNL) in Upton, New York. The Brookhaven Survey Group (BSG) has completed removal and performed Final Status Survey (FSS) of the concrete duct from Trench 5 from Building 801 to the Stack. Sample results have been submitted as required to demonstrate that the cleanup goal of (le)15 mrem/yr above background to a resident in 50 years has been met. Four rounds of sampling, from pre-excavation to FSS, were performed as specified in the Field Sampling Plan (FSP) (BNL 2010a). It is the policy of the U.S. Department of Energy (DOE) to perform independent verifications of decontamination and decommissioning activities conducted at DOE facilities. ORISE has been designated as the organization responsible for this task for the HFBR Underground Utilities. ORISE, together with DOE, determined that a Type A verification of Trench 5 was appropriate based on recent verification results from Trenches 2, 3, and 4, and the minimal potential for residual radioactivity in the area. The removal of underground utilities is being performed in three stages to decommission the HFBR facility and support structures. Phase 3 of this project included the removal of at least 200 feet of 36-inch to 42-inch pipe from the west side to the south side of Building 801, and the 14-inch diameter Acid Waste Line that spanned from 801 to the Stack within Trench 5. Based on the pre-excavation sample results of the soil overburden the potential for contamination of the soil surrounding the pipe is minimal (BNL 2010a). ORISE reviewed the BNL FSP and identified comments for consideration (ORISE 2010). BNL prepared a revised FSP that resolved each ORISE comment adequately (BNL 2010a). ORISE referred to the revised HFBR Underground Utilities FSP FSS data to conduct the Type A verification

  4. Sobolev type spaces associated with the q-Rubin's operator

    Directory of Open Access Journals (Sweden)

    Neji Bettaibi

    2014-05-01

    Full Text Available In this paper we introduce and   study   some $q$-Sobolev type spaces by using the harmonic analysis associated with the q-Rubin operator. In particular, embedding theorems for these spaces are established.  Next, we introduce the q-Rubin potential spaces and study some of its properties.

  5. Designing informal learning spaces using student perspectives

    Directory of Open Access Journals (Sweden)

    Matthew David Riddle

    2012-06-01

    Full Text Available This article describes the design of informal learning spaces at an Australian university that support students in the generation of knowledge. Recent learning space design projects at La Trobe have been informed by a number of pre-existing projects, including a small research project on student use of technologies, a national project on learning space design, and a significant curriculum renewal process at the university. It demonstrates the ways in which evidence based on student perspectives and principles developed through applied research in teaching and learning can inform real world learning space design projects in a higher education context.

  6. Homogeneity Property of Besov and Triebel-Lizorkin Spaces

    Directory of Open Access Journals (Sweden)

    Cornelia Schneider

    2012-01-01

    Full Text Available We consider the classical Besov and Triebel-Lizorkin spaces defined via differences and prove a homogeneity property for functions with bounded support in the frame of these spaces. As the proof is based on compact embeddings between the studied function spaces, we present also some results on the entropy numbers of these embeddings. Moreover, we derive some applications in terms of pointwise multipliers.

  7. Tourism in Real and Virtual Space

    Directory of Open Access Journals (Sweden)

    Alireza Dehghan

    2009-07-01

    Full Text Available During these two decades, according to the expansion of communication, there is a deep transformation in individuals’ conception of space. As space plays an important role in tourism, either real or virtual, this transformation happens in the field too. The present study attempts to show how tourism in the contemporary virtualized world, or as some authors name: the dual globalized situation, occurs.

  8. GENERAL IN AIR AND SPACE LAW

    Directory of Open Access Journals (Sweden)

    Z. Z. Khalilov

    2015-01-01

    Full Text Available The article deals with the study of link between air and space law, the problem of determining the boundaries of the airspace is investigated. The international practices of various institutions of air and space law, in particular, in Europe, Argentina, Turkey, and the practice of studying these issues in joint form within the research Institute of the Republic of Azerbaijan are analyzed.

  9. Early term and late preterm birth are associated with poorer school performance at age 5 years: a cohort study.

    Science.gov (United States)

    Quigley, Maria A; Poulsen, Gry; Boyle, Elaine; Wolke, Dieter; Field, David; Alfirevic, Zarko; Kurinczuk, Jennifer J

    2012-05-01

    To compare school performance at age 5 years in children born at full term (39-41 weeks gestation) with those born at early term (37-38 weeks gestation), late preterm (34-36 weeks gestation), moderately preterm (32-33 weeks gestation) and very preterm (2000-2001 and attending school in England in 2006. School performance was measured using the foundation stage profile (FSP), a statutory assessment by teachers at the end of the child's first school year. The FSP comprises 13 assessment scales (scored from 1 to 9). Children who achieve an average of 6 points per scale and at least 6 in certain scales are classified as 'reaching a good level of overall achievement'. Fifty-one per cent of full term children had not reached a good level of overall achievement; this proportion increased with prematurity (55% in early term, 59% in late preterm, 63% in moderately preterm and 66% in very preterm children). Compared with full term children, an elevated risk remained after adjustment, even in early term (adjusted RR 1.05, 95% 1.00 to 1.11) and late preterm children (adjusted RR 1.12, 95% CI 1.04 to 1.22). Similar effects were noted for 'not working securely' in mathematical development, physical development and creative development. The effects of late preterm and early term birth were small in comparison with other risk factors. Late preterm and early term birth are associated with an increased risk of poorer educational achievement at age 5 years.

  10. Occupy: New Pedagogy of Space and Time?

    Directory of Open Access Journals (Sweden)

    Sarah Amsler

    2015-12-01

    Full Text Available This paper forms the first part of a project of inquiry to understand the theoretical and practical potentials of Occupy through the recent wave of occupations that have emerged in response to the politics of austerity and precarity around the world. We do this as educators who are seeking to ‘occupy’ spaces of higher education inside and outside of the institutions in which we work. Occupy points to the centrality of space and time as practical concepts through which it is possible to reconfigure revolutionary activity. By dealing with the concept (Occupy at this fundamental level of space and time through a critical engagement with Henri Lefebvre’s notion of ‘a new pedagogy of space and time’, we hope to open spaces for further revolutionary transformation by extending a critique of the politics of space and time into the institutions and idea of education itself. Lefebvre considers the ‘pedagogy of space and time’ as a basis for a new form of ‘counter-space’. He suggests that ‘deviant or diverted spaces, though initially subordinate, show distinct evidence of a true productive capacity’ (2008: 383, and in doing so reveal the breaking points of everyday life and the ways in which it might be appropriated as exuberant spaces full of enjoyment and hope. In the Production of Space, he identifies the space of leisure as a site within which such a resistance might be contemplated and activated. In our work we replace the principle of leisure with the concept of Occupy. We consider here how attempts to occupy the university curriculum, not as a programme of education but as the production of critical knowledge, may also constitute ‘a new pedagogy of space and time’. We will describe this occupation of higher education with reference to two projects with which we are involved Student as Producer and the Social Science Centre, the former at the University of Lincoln, and the latter across the city of Lincoln.

  11. The full Keller-Segel model is well-posed on nonsmooth domains

    Science.gov (United States)

    Horstmann, D.; Meinlschmidt, H.; Rehberg, J.

    2018-04-01

    In this paper we prove that the full Keller-Segel system, a quasilinear strongly coupled reaction-crossdiffusion system of four parabolic equations, is well-posed in the sense that it always admits an unique local-in-time solution in an adequate function space, provided that the initial values are suitably regular. The proof is done via an abstract solution theorem for nonlocal quasilinear equations by Amann and is carried out for general source terms. It is fundamentally based on recent nontrivial elliptic and parabolic regularity results which hold true even on rather general nonsmooth spatial domains. For space dimensions 2 and 3, this enables us to work in a nonsmooth setting which is not available in classical parabolic systems theory. Apparently, there exists no comparable existence result for the full Keller-Segel system up to now. Due to the large class of possibly nonsmooth domains admitted, we also obtain new results for the ‘standard’ Keller-Segel system consisting of only two equations as a special case. This work is dedicated to Prof Willi Jäger.

  12. The unitary space of particle internal states

    International Nuclear Information System (INIS)

    Perjes, Z.

    1978-09-01

    A relativistic theory of particle internal properties has been developed. Suppressing space-time information, internal wave functions and -observables are constructed in a 3-complex-dimensional space. The quantum numbers of a spinning point particle in this unitary space correspond with those of a low-mass hadron. Unitary space physics is linked with space-time notions via the Penrose theory of twistors, where new flavors may be represented by many-twistor systems. It is shown here that a four-twistor particle fits into the unitary space picture as a system of two points with equal masses and oppositely pointing unitary spins. Quantum states fall into the ISU(3) irreducible representations discovered by Sparling and the author. Full details of the computation involving SU(3) recoupling techniques are given. (author)

  13. g-Weak Contraction in Ordered Cone Rectangular Metric Spaces

    Directory of Open Access Journals (Sweden)

    S. K. Malhotra

    2013-01-01

    Full Text Available We prove some common fixed-point theorems for the ordered g-weak contractions in cone rectangular metric spaces without assuming the normality of cone. Our results generalize some recent results from cone metric and cone rectangular metric spaces into ordered cone rectangular metric spaces. Examples are provided which illustrate the results.

  14. Online Social Networks and the New Organizational Spaces

    Directory of Open Access Journals (Sweden)

    Cintia Rodrigues de Oliveira Medeiros

    2013-04-01

    Full Text Available We analyzed the ‘virtuality’ of the social space and the boundaries of organizations from the emergence and dissemination of online social networking. The purpose is to identify how the use of social networks by 10 Brazilian companies enables the redefinition and expansion of organizational space. For the analysis of the data, we used the theory of social space of Lefebvre (2004, which defines three moments of space social production: the imagined space, the lived space and the perceived space. The methodological qualitative approach is done by document analysis from the websites of the companies. We show that the organizational space has new contours with the adoption of online social networks and we analyzed four spatial metaphors: the square, the museum, the temple and the market.

  15. Pre-Metric Spaces Along with Different Types of Triangle Inequalities

    Directory of Open Access Journals (Sweden)

    Hsien-Chung Wu

    2018-05-01

    Full Text Available The T 1 -spaces induced by the pre-metric spaces along with many forms of triangle inequalities are investigated in this paper. The limits in pre-metric spaces are also studied to demonstrate the consistency of limit concept in the induced topologies.

  16. Existential space understanding through digital image

    Directory of Open Access Journals (Sweden)

    Susana Iñarra Abad

    2013-10-01

    Full Text Available The logical way to learn from the architectural space and then be able to design and represent it is, undoubtedly, that of experiencing it through all the sensitive channels that the space wakes up us.  But since the last 30 years, much of our learning about space comes from images of architecture and not from the space itself. The art of architecture is drifting towards a visual art and moving away from its existential side. In digital images that have flooded the architectural media, digital photographs of existing spaces intermingle with non-existent space renderings (photographs with a virtual camera. The first ones represent existing places but can be altered to change the perception that  the observer of the image will have, the second ones speak to us about places that do not exist yet but they present reality portions through extracts from digital photography (textures, trees, people... that compose the image.

  17. Analysing Medieval Urban Space; a methodology

    Directory of Open Access Journals (Sweden)

    Marlous L. Craane MA

    2007-08-01

    Full Text Available This article has been written in reaction to recent developments in medieval history and archaeology, to study not only the buildings in a town but also the spaces that hold them together. It discusses a more objective and interdisciplinary approach for analysing urban morphology and use of space. It proposes a 'new' methodology by combining town plan analysis and space syntax. This methodology was trialled on the city of Utrecht in the Netherlands. By comparing the results of this 'new' methodology with the results of previous, more conventional, research, this article shows that space syntax can be applied successfully to medieval urban contexts. It does this by demonstrating a strong correlation between medieval economic spaces and the most integrated spaces, just as is found in the study of modern urban environments. It thus provides a strong basis for the use of this technique in future research of medieval urban environments.

  18. Low-crosstalk full-duplex all-optical indoor wireless transmission with carrier recovery

    NARCIS (Netherlands)

    Oh, C.W.; Cao, Z.; Mekonnen, K.A.; Tangdiongga, E.; Koonen, A.M.J.

    2017-01-01

    We propose and demonstrate a novel bi-directional free-space (FS) optical wireless communication system for indoor wireless networks. A 2-D infrared beam-steered system supporting full-duplex communication of at least 10 Gb/s capacity per wireless terminal with simple NRZ-OOK modulation format is

  19. Silica aerogel and space astrophysics

    International Nuclear Information System (INIS)

    Koch-Miramond, L.

    1985-09-01

    Silica aerogels have been produced in large and transparent blocks for space astrophysics experiments since the beginning of the 1970's. They were used in cosmic ray experiments on board balloons by the Saclay group. A new space venture where aerogel Cerenkov radiators will play a decisive role is currently being prepared by a large collaboration of European and US Institutes. It will be part of the so-called International Solar Polar Mission (ISPM) which will explore the heliosphere over the full range of solar latitudes from the ecliptic (equatorial) plane to the magnetic poles of the sun. Comments on properties and long term behaviour of silica aerogel cerenkov radiators in space environment are given

  20. Towards Supercapacitors in Space Applications

    Directory of Open Access Journals (Sweden)

    Buergler Brandon

    2017-01-01

    Full Text Available Supercapacitors offer a wide range of applications for space flight. The aim of this activity was to pursue life tests on commercial off the shelf (COTS supercapacitors from different manufacturers, to evaluate their performance after long term vacuum exposure and to investigate balancing designs for the use of these cells in banks of supercapacitors (BOSC. This study enabled to select the most suitable part for space applications and to confirm the design rules at unit level and deratings at component level, which need to be applied. All those complementary results have paved the way to the on-going activities related to Nesscap 10F qualification and associated modular Bank Of Supercapacitors development for space applications.

  1. Nω –CLOSED SETS IN NEUTROSOPHIC TOPOLOGICAL SPACES

    Directory of Open Access Journals (Sweden)

    Santhi R.

    2016-08-01

    Full Text Available Neutrosophic set and Neutrosophic Topological spaces has been introduced by Salama. Neutrosophic Closed set and Neutrosophic Continuous Functions were introduced by Salama et. al.. In this paper, we introduce the concept of Nω- closed sets and their properties in Neutrosophic topological spaces.

  2. Space radiation and astronaut safety

    CERN Document Server

    Seedhouse, Erik

    2018-01-01

    This brief explores the biological effects of long-term radiation on astronauts in deep space. As missions progress beyond Earth's orbit and away from the protection of its magnetic shielding, astronauts risk constant exposure to higher levels of galactic cosmic rays and solar particle events. The text concisely addresses the full spectrum of biomedical consequences from exposure to space radiation and goes on to present possible ways to mitigate such dangers and protect astronauts within the limitations of existing technologies.

  3. ON DEFINING S-SPACES

    Directory of Open Access Journals (Sweden)

    Francesco Strati

    2013-05-01

    Full Text Available The present work is intended to be an introduction to the Superposition Theory of David Carfì. In particular I shall depict the meaning of his brand new theory, on the one hand in an informal fashion and on the other hand by giving a formal approach of the algebraic structure of the theory: the S-linear algebra. This kind of structure underpins the notion of S-spaces (or Carfì-spaces by defining both its properties and its nature. Thus I shall define the S-triple as the fundamental principle upon which the S-linear algebra is built up.

  4. Convexity and the Euclidean Metric of Space-Time

    Directory of Open Access Journals (Sweden)

    Nikolaos Kalogeropoulos

    2017-02-01

    Full Text Available We address the reasons why the “Wick-rotated”, positive-definite, space-time metric obeys the Pythagorean theorem. An answer is proposed based on the convexity and smoothness properties of the functional spaces purporting to provide the kinematic framework of approaches to quantum gravity. We employ moduli of convexity and smoothness which are eventually extremized by Hilbert spaces. We point out the potential physical significance that functional analytical dualities play in this framework. Following the spirit of the variational principles employed in classical and quantum Physics, such Hilbert spaces dominate in a generalized functional integral approach. The metric of space-time is induced by the inner product of such Hilbert spaces.

  5. Reflection and transmission of normally incident full-vector X waves on planar interfaces

    KAUST Repository

    Salem, Mohamed; Bagci, Hakan

    2011-01-01

    The reflection and transmission of full-vector X waves normally incident on planar half-spaces and slabs are studied. For this purpose, X waves are expanded in terms of weighted vector Bessel beams; this new decomposition and reconstruction method

  6. THE ECONOMIC SPACE OF RUSSIA: PROBLEMS AND TRENDS

    Directory of Open Access Journals (Sweden)

    E.Y. Animitsa

    2006-09-01

    Full Text Available The paper considers the essence of the definition "economic space", its basic characteristics and properties. From the point of view of the regional economy the modern structure of the economic space of the Russian Federation is examined. The scientific problem of finding out the new territorial economic formations with vague, not clearly cut administrative borders studied in the framework of scientific trend "space economy" is posed.

  7. CASSINI V/E/J/S/SS RPWS EDITED WAVEFORM FULL RES V1.0

    Data.gov (United States)

    National Aeronautics and Space Administration — The Cassini Radio and Plasma Wave Science (RPWS) edited full resolution data set includes all waveform data for the entire Cassini mission. This data set includes...

  8. The Outer Space Treaty

    Science.gov (United States)

    Johnson, Christopher Daniel

    2018-01-01

    Negotiated at the United Nations and in force since 1967, the Outer Space Treaty has been ratified by over 100 countries and is the most important and foundational source of space law. The treaty, whose full title is "Treaty on Principles Governing the Activities of States in the Exploration and Use of Outer Space, Including the Moon and Other Celestial Bodies," governs all of humankind's activities in outer space, including activities on other celestial bodies and many activities on Earth related to outer space. All space exploration and human spaceflight, planetary sciences, and commercial uses of space—such as the global telecommunications industry and the use of space technologies such as position, navigation, and timing (PNT), take place against the backdrop of the general regulatory framework established in the Outer Space Treaty. A treaty is an international legal instrument which balances rights and obligations between states, and exists as a kind of mutual contract of shared understandings, rights, and responsibilities between them. Negotiated and drafted during the Cold War era of heightened political tensions, the Outer Space Treaty is largely the product of efforts by the United States and the USSR to agree on certain minimum standards and obligations to govern their competition in "conquering" space. Additionally, the Outer Space Treaty is similar to other treaties, including treaties governing the high seas, international airspace, and the Antarctic, all of which govern the behavior of states outside of their national borders. The treaty is brief in nature and only contains 17 articles, and is not comprehensive in addressing and regulating every possible scenario. The negotiating states knew that the Outer Space Treaty could only establish certain foundational concepts such as freedom of access, state responsibility and liability, non-weaponization of space, the treatment of astronauts in distress, and the prohibition of non-appropriation of

  9. SUSTAINABILITY OF DIGITAL PUBLIC SPACES

    Directory of Open Access Journals (Sweden)

    Matej Hudák

    2015-07-01

    Full Text Available Purpose: Modern digital public spaces are evolving from being mostly the provider of ICT and internet connection to institutions that provide complex range of services and support for the community. With this shift in their focus new challenges are emerging, among others their sustainability.Methodology/Approach: We build on and extend the methodology of Digital Cooperatives project. Within this project, survey on 59 digital public spaces from 12 EU countries was conducted. These digital public spaces were examined in 21 areas, some of them relating to their sustainability. We further analyse the sustainability issue of these digital public spaces.Findings: We identified three main issues affecting sustainability of digital public spaces – budgeting, services and community. Digital public spaces mostly rely on public funding and have limited diversification of their funds, which increases a risk when one source of funding drops out. They also have to build a strong community of users, supporters, which will make use of their capacities and helps co-create new services and thus strengthen and improve the community itself.Originality/Value of paper: Research in this paper is based on the collection of best practices from various EU countries in the field of digital public spaces. Recommendations based on these practices could help the creation of new, and in current digital public spaces.

  10. Space-Time Quantum Imaging

    Directory of Open Access Journals (Sweden)

    Ronald E. Meyers

    2015-03-01

    Full Text Available We report on an experimental and theoretical investigation of quantum imaging where the images are stored in both space and time. Ghost images of remote objects are produced with either one or two beams of chaotic laser light generated by a rotating ground glass and two sensors measuring the reference field and bucket field at different space-time points. We further observe that the ghost images translate depending on the time delay between the sensor measurements. The ghost imaging experiments are performed both with and without turbulence. A discussion of the physics of the space-time imaging is presented in terms of quantum nonlocal two-photon analysis to support the experimental results. The theoretical model includes certain phase factors of the rotating ground glass. These experiments demonstrated a means to investigate the time and space aspects of ghost imaging and showed that ghost imaging contains more information per measured photon than was previously recognized where multiple ghost images are stored within the same ghost imaging data sets. This suggests new pathways to explore quantum information stored not only in multi-photon coincidence information but also in time delayed multi-photon interference. The research is applicable to making enhanced space-time quantum images and videos of moving objects where the images are stored in both space and time.

  11. Time-domain incomplete Gauss-Newton full-waveform inversion of Gulf of Mexico data

    KAUST Repository

    AlTheyab, Abdullah; Wang, Xin; Schuster, Gerard T.

    2013-01-01

    We apply the incomplete Gauss-Newton full-waveform inversion (TDIGN-FWI) to Gulf of Mexico (GOM) data in the space-time domain. In our application, iterative least-squares reverse-time migration (LSRTM) is used to estimate the model update at each

  12. Theories of Space and the Nineteenth-Century Novel

    Directory of Open Access Journals (Sweden)

    Isobel Armstrong

    2013-10-01

    Full Text Available This article explores the construction of a spatial and interspatial subject in the nineteenth-century novel, examining initially the epistemologies of space developed by Kant and Hegel, and concluding with discussion of two further theorists of space, Bachelard and Lefebvre. It deploys this rich array of theorization to illuminate strategies through which the nineteenth-century novelist creates situatedness in language, asking how 'does' the novel represent space, and arguing that if we take away this almost miraculous verbal construction of space there is not much left to the novel.

  13. Space-Time Chip Equalization for Maximum Diversity Space-Time Block Coded DS-CDMA Downlink Transmission

    Directory of Open Access Journals (Sweden)

    Petré Frederik

    2004-01-01

    Full Text Available In the downlink of DS-CDMA, frequency-selectivity destroys the orthogonality of the user signals and introduces multiuser interference (MUI. Space-time chip equalization is an efficient tool to restore the orthogonality of the user signals and suppress the MUI. Furthermore, multiple-input multiple-output (MIMO communication techniques can result in a significant increase in capacity. This paper focuses on space-time block coding (STBC techniques, and aims at combining STBC techniques with the original single-antenna DS-CDMA downlink scheme. This results into the so-called space-time block coded DS-CDMA downlink schemes, many of which have been presented in the past. We focus on a new scheme that enables both the maximum multiantenna diversity and the maximum multipath diversity. Although this maximum diversity can only be collected by maximum likelihood (ML detection, we pursue suboptimal detection by means of space-time chip equalization, which lowers the computational complexity significantly. To design the space-time chip equalizers, we also propose efficient pilot-based methods. Simulation results show improved performance over the space-time RAKE receiver for the space-time block coded DS-CDMA downlink schemes that have been proposed for the UMTS and IS-2000 W-CDMA standards.

  14. Hybrid fixed point in CAT(0 spaces

    Directory of Open Access Journals (Sweden)

    Hemant Kumar Pathak

    2018-02-01

    Full Text Available In this paper, we introduce an ultrapower approach to prove fixed point theorems for $H^{+}$-nonexpansive multi-valued mappings in the setting of CAT(0 spaces and prove several hybrid fixed point results in CAT(0 spaces for families of single-valued nonexpansive or quasinonexpansive mappings and multi-valued upper semicontinuous, almost lower semicontinuous or $H^{+}$-nonexpansive mappings which are weakly commuting. We also establish a result about structure of the set of fixed points of $H^{+}$-quasinonexpansive mapping on a CAT(0 space.

  15. The Quantum Space Phase Transitions for Particles and Force Fields

    Directory of Open Access Journals (Sweden)

    Chung D.-Y.

    2006-07-01

    Full Text Available We introduce a phenomenological formalism in which the space structure is treated in terms of attachment space and detachment space. Attachment space attaches to an object, while detachment space detaches from the object. The combination of these spaces results in three quantum space phases: binary partition space, miscible space and binary lattice space. Binary lattice space consists of repetitive units of alternative attachment space and detachment space. In miscible space, attachment space is miscible to detachment space, and there is no separation between attachment space and detachment spaces. In binary partition space, detachment space and attachment space are in two separat continuous regions. The transition from wavefunction to the collapse of wavefuction under interference becomes the quantum space phase transition from binary lattice space to miscible space. At extremely conditions, the gauge boson force field undergoes a quantum space phase transition to a "hedge boson force field", consisting of a "vacuum" core surrounded by a hedge boson shell, like a bubble with boundary.

  16. 3D molecular descriptors important for clinical success.

    Science.gov (United States)

    Kombo, David C; Tallapragada, Kartik; Jain, Rachit; Chewning, Joseph; Mazurov, Anatoly A; Speake, Jason D; Hauser, Terry A; Toler, Steve

    2013-02-25

    The pharmacokinetic and safety profiles of clinical drug candidates are greatly influenced by their requisite physicochemical properties. In particular, it has been shown that 2D molecular descriptors such as fraction of Sp3 carbon atoms (Fsp3) and number of stereo centers correlate with clinical success. Using the proteomic off-target hit rate of nicotinic ligands, we found that shape-based 3D descriptors such as the radius of gyration and shadow indices discriminate off-target promiscuity better than do Fsp3 and the number of stereo centers. We have deduced the relevant descriptor values required for a ligand to be nonpromiscuous. Investigating the MDL Drug Data Report (MDDR) database as compounds move from the preclinical stage toward the market, we have found that these shape-based 3D descriptors predict clinical success of compounds at preclinical and phase1 stages vs compounds withdrawn from the market better than do Fsp3 and LogD. Further, these computed 3D molecular descriptors correlate well with experimentally observed solubility, which is among well-known physicochemical properties that drive clinical success. We also found that about 84% of launched drugs satisfy either Shadow index or Fsp3 criteria, whereas withdrawn and discontinued compounds fail to meet the same criteria. Our studies suggest that spherical compounds (rather than their elongated counterparts) with a minimal number of aromatic rings may exhibit a high propensity to advance from clinical trials to market.

  17. How Full is Full Employment? : How Tools and Not Theory Explained Full Employment

    NARCIS (Netherlands)

    Rodenburg, P.

    2016-01-01

    The post-war debate on full employment policy was blurred and unclear since the concept of full employment itself was theoretically unclear and un-operational. Unable to theoretically determine the unemployment level of full employment, economists tried to find more empirically based ways to

  18. Riesz Representation Theorem on Bilinear Spaces of Truncated Laurent Series

    Directory of Open Access Journals (Sweden)

    Sabarinsyah

    2017-06-01

    Full Text Available In this study a generalization of the Riesz representation theorem on non-degenerate bilinear spaces, particularly on spaces of truncated Laurent series, was developed. It was shown that any linear functional on a non-degenerate bilinear space is representable by a unique element of the space if and only if its kernel is closed. Moreover an explicit equivalent condition can be identified for the closedness property of the kernel when the bilinear space is a space of truncated Laurent series.

  19. Measuring space radiation shielding effectiveness

    Directory of Open Access Journals (Sweden)

    Bahadori Amir

    2017-01-01

    Full Text Available Passive radiation shielding is one strategy to mitigate the problem of space radiation exposure. While space vehicles are constructed largely of aluminum, polyethylene has been demonstrated to have superior shielding characteristics for both galactic cosmic rays and solar particle events due to the high hydrogen content. A method to calculate the shielding effectiveness of a material relative to reference material from Bragg peak measurements performed using energetic heavy charged particles is described. Using accelerated alpha particles at the National Aeronautics and Space Administration Space Radiation Laboratory at Brookhaven National Laboratory, the method is applied to sample tiles from the Heat Melt Compactor, which were created by melting material from a simulated astronaut waste stream, consisting of materials such as trash and unconsumed food. The shielding effectiveness calculated from measurements of the Heat Melt Compactor sample tiles is about 10% less than the shielding effectiveness of polyethylene. Shielding material produced from the astronaut waste stream in the form of Heat Melt Compactor tiles is therefore found to be an attractive solution for protection against space radiation.

  20. Space Weather: The Solar Perspective

    Directory of Open Access Journals (Sweden)

    Schwenn Rainer

    2006-08-01

    Full Text Available The term space weather refers to conditions on the Sun and in the solar wind, magnetosphere, ionosphere, and thermosphere that can influence the performance and reliability of space-borne and ground-based technological systems and that can affect human life and health. Our modern hi-tech society has become increasingly vulnerable to disturbances from outside the Earth system, in particular to those initiated by explosive events on the Sun: Flares release flashes of radiation that can heat up the terrestrial atmosphere such that satellites are slowed down and drop into lower orbits, solar energetic particles accelerated to near-relativistic energies may endanger astronauts traveling through interplanetary space, and coronal mass ejections are gigantic clouds of ionized gas ejected into interplanetary space that after a few hours or days may hit the Earth and cause geomagnetic storms. In this review, I describe the several chains of actions originating in our parent star, the Sun, that affect Earth, with particular attention to the solar phenomena and the subsequent effects in interplanetary space.

  1. Novel Equalization Techniques for Space Division Multiplexing Based on Stokes Space Update Rule

    Directory of Open Access Journals (Sweden)

    Francisco Javier Vaquero Caballero

    2017-02-01

    Full Text Available Space division multiplexing (SDM is a promising technology that aims to overcome the capacity crunch of optical communications. In this paper, we introduce the multiple-input multiple-output (MIMO Stokes Space Algorithm (SSA implemented in frequency domain, a novel equalization technique for space division multiplexing (SDM. Although different papers have been published about the SSA and its MIMO implementation, we provide for the first time an analysis of the of the convergence speed and frequency offset of the SSA compared to the least mean square (LMS. SSA algorithm can deal with higher frequency offsets and linewidths than LMS, being suitable for optical communications with higher phase noise. SSA does not need pre-compensation of frequency offset, which can be compensated after equalization without penalties. On the other hand, due to reduced convergence speed, SSA requires longer training sequences than LMS.

  2. Learning From Critical Collective Spaces: Reflections on the Community-Diversity Dialectic in Safe Spaces

    Directory of Open Access Journals (Sweden)

    Jennifer Wallin-Ruschman

    2016-05-01

    Full Text Available Safe spaces have the potential to become prefigurative groups that aim to create social change. The idea of a safe space as a place separate and sheltered from dominant culture to mobilize for social change has gained traction in a number of academic and practical areas. However, safe spaces have the ability to be both progressive and regressive. To guide our discussion we utilize the concept of community-diversity dialectic to address the tension between these forces within two settings. First we discuss research in an upper level college course rooted in feminist praxis. Then we discuss a faith community’s use of adaptive liturgy with parishioners with intellectual disabilities. Following this discussion, we offer a new term, “critical collective spaces”, to better capture the work done in these spaces. We offer this alternative label to move popular and academic discourse away from debating about how “safe” these spaces are (or are not and toward a more nuanced discussion of the community-diversity dialectic and other tensions within these spaces. Our overall intention is to generate dialogue on the regressive and progressive aspects of these locations and to inform the activism and community building process within prefigurative politics more broadly.

  3. Independence and totalness of subspaces in phase space methods

    Science.gov (United States)

    Vourdas, A.

    2018-04-01

    The concepts of independence and totalness of subspaces are introduced in the context of quasi-probability distributions in phase space, for quantum systems with finite-dimensional Hilbert space. It is shown that due to the non-distributivity of the lattice of subspaces, there are various levels of independence, from pairwise independence up to (full) independence. Pairwise totalness, totalness and other intermediate concepts are also introduced, which roughly express that the subspaces overlap strongly among themselves, and they cover the full Hilbert space. A duality between independence and totalness, that involves orthocomplementation (logical NOT operation), is discussed. Another approach to independence is also studied, using Rota's formalism on independent partitions of the Hilbert space. This is used to define informational independence, which is proved to be equivalent to independence. As an application, the pentagram (used in discussions on contextuality) is analysed using these concepts.

  4. Vision of Space Exploration Possibilities and limits of a human space conquest.

    Science.gov (United States)

    Zelenyi, Lev

    Few generations of a schoolboys, which later become active and productive space researchers, have been brought up on a science fiction books. These books told us about travels to other Galaxies with velocities larger then velocity of light, meetings with friendly aliens (necessarily with communistic mentalities in Soviet Union books), star wars with ugly space monsters (in the western hemisphere books), etc. Beginning of Space age (4/10/1957) opened the door to a magic box, full of scientific discoveries, made mostly by robotic satellites and spacecraft. However, already the first human space trips clearly demonstrated that space is vigorously hostile to a human beings. Space medicine during the years since Gagarin flight, made an outstanding progress in supporting human presence at orbital stations, but the radiation hazards and problem of hypomagnetism are still opened and there is no visible path to their solution. So the optimistic slogan of 60-ies “Space is Our Place” is not supported by an almost half a century practice. Space never will be a comfortable place for soft and vulnerable humans? There is a general consensus that man will be on Mars during this century (or even its first part). This is very difficult but task it seems to be realistic after the significant advance of modern technologies will be made. But, is there any real need for humans to travel beyond the Mars orbit or to the inner regions of the Solar system? Will the age of Solar system exploration comes to its logical as it was described by Stanislav Lem in his famous book “Return from stars”? The author of this talk has more questions than answers, and thinks that PEX1 Panel on Exploration is just a right place to discuss these usually by passed topics.

  5. Presic-Boyd-Wong Type Results in Ordered Metric Spaces

    Directory of Open Access Journals (Sweden)

    Satish Shukla

    2014-04-01

    Full Text Available The purpose of this paper is to prove some Presic-Boyd-Wong type fixed point theorems in ordered metric spaces. The results of this paper generalize the famous results of Presic and Boyd-Wong in ordered metric spaces. We also initiate the homotopy result in product spaces. Some examples are provided which illustrate the results proved herein.

  6. Hadamard Multipliers and Abel Dual of Hardy Spaces

    Directory of Open Access Journals (Sweden)

    Paweł Mleczko

    2016-01-01

    Full Text Available The paper is devoted to the study of Hadamard multipliers of functions from the abstract Hardy classes generated by rearrangement invariant spaces. In particular the relation between the existence of such multiplier and the boundedness of the appropriate convolution operator on spaces of measurable functions is presented. As an application, the description of Hadamard multipliers into H∞ is given and the Abel type theorem for mentioned Hardy spaces is proved.

  7. PROJECT-SPECIFIC TYPE A VERIFICATION FOR THE HIGH FLUX BEAM REACTOR UNDERGROUND UTILITIES REMOVAL PHASE 3 TRENCH 1, BROOKHAVEN NATIONAL LABORATORY UPTON, NEW YORK

    International Nuclear Information System (INIS)

    Harpenau, E.M.

    2010-01-01

    The Oak Ridge Institute for Science and Education (ORISE) has reviewed the project documentation and data for the High Flux Beam Reactor (HFBR) Underground Utilities removal Phase 3; Trench 1 at Brookhaven National Laboratory (BNL) in Upton, New York. The Brookhaven Survey Group (BSG) has completed removal and performed Final Status Survey (FSS) of the 42-inch duct and 14-inch line in Trench 1 from Building 801 to the Stack. Sample results have been submitted as required to demonstrate that the cleanup goal of (le)15 mrem/yr above background to a resident in 50 years has been met. Four rounds of sampling, from pre-excavation to FSS, were performed as specified in the Field Sampling Plan (FSP) (BNL 2010a). It is the policy of the U.S. Department of Energy (DOE) to perform independent verifications of decontamination and decommissioning activities conducted at DOE facilities. ORISE has been designated as the organization responsible for this task for the HFBR Underground Utilities. ORISE, together with DOE, determined that a Type A verification of Trench 1 was appropriate based on recent verification results from Trenches 2, 3, 4, and 5, and the minimal potential for residual radioactivity in the area. The removal of underground utilities has been performed in three stages to decommission the HFBR facility and support structures. Phase 3 of this project included the removal of at least 200 feet of 36-inch to 42-inch duct from the west side to the south side of Building 801, and the 14-inch diameter Acid Waste Line that spanned from 801 to the Stack within Trench 1. Based on the pre-excavation sample results of the soil overburden, the potential for contamination of the soil surrounding the pipe is minimal (BNL 2010a). ORISE reviewed the gamma spectroscopy results for 14 FSS soil samples, four core samples, and one duplicate sample collected from Trench 1. Sample results for the radionuclides of concern were below the established cleanup goals. However, in sample PH-3

  8. Facilitating Full-text Access to Biomedical Literature Using Open Access Resources.

    Science.gov (United States)

    Kang, Hongyu; Hou, Zhen; Li, Jiao

    2015-01-01

    Open access (OA) resources and local libraries often have their own literature databases, especially in the field of biomedicine. We have developed a method of linking a local library to a biomedical OA resource facilitating researchers' full-text article access. The method uses a model based on vector space to measure similarities between two articles in local library and OA resources. The method achieved an F-score of 99.61%. This method of article linkage and mapping between local library and OA resources is available for use. Through this work, we have improved the full-text access of the biomedical OA resources.

  9. Unique features of space reactors

    International Nuclear Information System (INIS)

    Buden, D.

    1990-01-01

    This paper reports on space reactors that are designed to meet a unique set of requirements; they must be sufficiently compact to be launched in a rocket to their operational location, operate for many years without maintenance and servicing, operate in extreme environments, and reject heat by radiation to space. To meet these restrictions, operating temperatures are much greater than in terrestrial power plants, and the reactors tend to have a fast neutron spectrum. Currently, a new generation of space reactor power plants is being developed. The major effort is in the SP-100 program, where the power plant is being designed for seven years of full power, and no maintenance operation at a reactor outlet operating temperature of 1350 K

  10. Analysis of Free-Space Optics Development

    Directory of Open Access Journals (Sweden)

    Mikołajczyk Janusz

    2017-12-01

    Full Text Available The article presents state of work in technology of free-space optical communications (Free Space Optics − FSO. Both commercially available optical data links and their further development are described. The main elements and operation limiting factors of FSO systems have been identified. Additionally, analyses of FSO/RF hybrid systems application are included. The main aspects of LasBITer project related to such hybrid technology for security and defence applications are presented.

  11. Friction stir processed Al - Metal oxide surface composites: Anodization and optical appearance

    DEFF Research Database (Denmark)

    Gudla, Visweswara Chakravarthy; Jensen, Flemming; Canulescu, Stela

    2014-01-01

    Multiple-pass friction stir processing (FSP) was employed to impregnate metal oxide (TiO2, Y2O3 and CeO2) particles into the surface of an Aluminium alloy. The surface composites were then anodized in a sulphuric acid electrolyte. The effect of anodizing parameters on the resulting optical...... dark to greyish white. This is attributed to the localized microstructural and morphological differences around the metal oxide particles incorporated into the anodic alumina matrix. The metal oxide particles in the FSP zone electrochemically shadowed the underlying Al matrix and modified the local...

  12. Design and characterization of self-assembled fish sarcoplasmic protein-alginate nanocomplexes

    DEFF Research Database (Denmark)

    Boutrup Stephansen, Karen; Mattebjerg, Maria Ahlm; Wattjes, Jasper

    2015-01-01

    Macrostructures based on natural polymers are subject to large attention, as the application range is wide within the food and pharmaceutical industries. In this study we present nanocomplexes (NCXs) made from electrostatic self-assembly between negatively charged alginate and positively charged...... fish sarcoplasmic proteins (FSP), prepared by bulk mixing. A concentration screening revealed that there was a range of alginate and FSP concentrations where stable NCXs with similar properties were formed, rather than two exact concentrations. The size of the NCXs was 293 +/- 3 nm, and the zeta...

  13. The effect of texture and grain size on improving the mechanical properties of Mg-Al-Zn alloys by friction stir processing.

    Science.gov (United States)

    Peng, Jinhua; Zhang, Zhen; Liu, Zhao; Li, Yaozu; Guo, Peng; Zhou, Wei; Wu, Yucheng

    2018-03-08

    Friction stir processing (FSP) was used to achieve grain refinement on Mg-Al-Zn alloys, which also brought in significant texture modification. The different micro-texture characteristics were found to cause irregular micro-hardness distribution in FSPed region. The effects of texture and grain size were investigated by comparative analyses with strongly textured rolling sheet. Grain refinement improved both strength and elongation in condition of a basal texture while such led to an increment in yield stress and a drop in elongation and ultimate stress when the basal texture was modified by FSP.

  14. Research on Full-polarization Bistatic Scattering Characteristics of Aircraft

    Directory of Open Access Journals (Sweden)

    Ai Xiaofeng

    2016-12-01

    Full Text Available Whole space polarimetric bistatic scattering data of full-size aircraft targets were calculated via the mature electromagnetic calculation software. The fluctuation statistics characteristic of the polarimetric bistatic Radar Cross-Section (RCS was carried out. It was found that the statistical properties of the four polarimetric types (HH, HV, VH, VV of polarimetric bistatic RCSs are nearly the same, while the monostatic main and cross polarization RCSs statistical properties were quite different from each other. The characteristics of the distribution statistic for the monostatic and bistatic polarization ratio were carried out. Moreover, it was found that the cross-main polarization ratios were quite different, while the main polarization ratios were similar. The statistical results provide a theoretical reference for fully polarimetric bistatic radar aircraft target detection experiments.

  15. Designing the robot inclusive space challenge

    Directory of Open Access Journals (Sweden)

    Rajesh Elara Mohan

    2015-11-01

    Full Text Available A novel robotic challenge, namely the robot inclusive spaces (RIS challenge, is proposed in this paper, which is a cross disciplinary and design focused initiative. It aims to foster the roboticists, architects, and designers towards realizing robot friendly social spaces. Contrary to conventional robotics competitions focusing on designing robots and its component technologies, robot inclusive spaces challenge adopts an interdisciplinary “design for robots” strategy to overcome the traditional research problem in real world deployments of social robots. In order to realize the RIS, various architectural elements must be adapted including: design principles for inclusive spaces, lighting schemes, furniture choices and arrangement, wall and floor surfaces, pathways among others. This paper introduces the format and design principles of RIS challenge, presents a first run of the challenge, and gives the corresponding analysis.

  16. Spaces of homotopy self-equivalences a survey

    CERN Document Server

    Rutter, John W

    1997-01-01

    This survey covers groups of homotopy self-equivalence classes of topological spaces, and the homotopy type of spaces of homotopy self-equivalences. For manifolds, the full group of equivalences and the mapping class group are compared, as are the corresponding spaces. Included are methods of calculation, numerous calculations, finite generation results, Whitehead torsion and other areas. Some 330 references are given. The book assumes familiarity with cell complexes, homology and homotopy. Graduate students and established researchers can use it for learning, for reference, and to determine the current state of knowledge.

  17. Assembly of a Full-Scale External Tank Barrel Section Using Friction Stir Welding

    Science.gov (United States)

    Jones, Chip; Adams, Glynn

    1999-01-01

    A full-scale pathfinder barrel section of the External Tank for the National Aeronautics and Space Administration (NASA) Space Transport System (Space Shuttle) has been assembled at Marshall Space Flight Center (MSFC) via a collaborative effort between NASA/MSFC and Lockheed Martin Michoud Space Systems. The barrel section is 27.5 feet in diameter and 15 feet in height. The barrel was assembled using Super-Light-Weight (SLWT), orthogrid, Al-Li 2195 panel sections and a single longeron panel. A vertical weld tool at MSFC was modified to accommodate FSW and used to assemble the barrel. These modifications included the addition of a FSW weld head and new controller hardware and software, the addition of a backing anvil and the replacement of the clamping system with individually actuated clamps. Weld process 4evelopment was initially conducted to optimize the process for the welds required for completing the assembly. The variable thickness welds in the longeron section were conducted via both two-sided welds and with the use of a retractable pin tool. The barrel assembly was completed in October 1998. Details of the vertical weld tool modifications and the assembly process are presented.

  18. Some Extensions of Banach's Contraction Principle in Complete Cone Metric Spaces

    Directory of Open Access Journals (Sweden)

    Raja P

    2008-01-01

    Full Text Available Abstract In this paper we consider complete cone metric spaces. We generalize some definitions such as -nonexpansive and -uniformly locally contractive functions -closure, -isometric in cone metric spaces, and certain fixed point theorems will be proved in those spaces. Among other results, we prove some interesting applications for the fixed point theorems in cone metric spaces.

  19. Source inversion in the full-wave tomography; Full wave tomography ni okeru source inversion

    Energy Technology Data Exchange (ETDEWEB)

    Tsuchiya, T [DIA Consultants Co. Ltd., Tokyo (Japan)

    1997-10-22

    In order to consider effects of characteristics of a vibration source in the full-wave tomography (FWT), a study has been performed on a method to invert vibration source parameters together with V(p)/V(s) distribution. The study has expanded an analysis method which uses as the basic the gradient method invented by Tarantola and the partial space method invented by Sambridge, and conducted numerical experiments. The experiment No. 1 has performed inversion of only the vibration source parameters, and the experiment No. 2 has executed simultaneous inversion of the V(p)/V(s) distribution and the vibration source parameters. The result of the discussions revealed that and effective analytical procedure would be as follows: in order to predict maximum stress, the average vibration source parameters and the property parameters are first inverted simultaneously; in order to estimate each vibration source parameter at a high accuracy, the property parameters are fixed, and each vibration source parameter is inverted individually; and the derived vibration source parameters are fixed, and the property parameters are again inverted from the initial values. 5 figs., 2 tabs.

  20. New media sociofugal spaces

    Directory of Open Access Journals (Sweden)

    Andrea Mubi Brighenti

    2014-09-01

    Full Text Available In a classic piece, Sommer (1967: 654 once defined sociofugal space as ‘a place where people typically try to avoid one another’. And the point is that – because of environmental spatial characteristics – people cannot successfully avoid each other, or can do so only to a limited extent. Typically, we are dealing with open public places, where the first come cannot prevent others from arriving afterwards. Under these conditions, space is often unwillingly shared. Consequently, every new arrival raises the thorny issue of the ‘critical distance’ between two or more co-specific socii (members of the same species, together with the question of how each socius is going to make space for himself or herself inside the shifting geometry that each new socius introduces in a context of inter-visibility (or, more precisely, in the element of visible.

  1. Benchmarking of 3D space charge codes using direct phase space measurements from photoemission high voltage dc gun

    Directory of Open Access Journals (Sweden)

    Ivan V. Bazarov

    2008-10-01

    Full Text Available We present a comparison between space charge calculations and direct measurements of the transverse phase space of space charge dominated electron bunches from a high voltage dc photoemission gun followed by an emittance compensation solenoid magnet. The measurements were performed using a double-slit emittance measurement system over a range of bunch charge and solenoid current values. The data are compared with detailed simulations using the 3D space charge codes GPT and Parmela3D. The initial particle distributions were generated from measured transverse and temporal laser beam profiles at the photocathode. The beam brightness as a function of beam fraction is calculated for the measured phase space maps and found to approach within a factor of 2 the theoretical maximum set by the thermal energy and the accelerating field at the photocathode.

  2. Statistical geometry and space-time

    International Nuclear Information System (INIS)

    Grauert, H.

    1976-01-01

    In this paper I try to construct a mathematical tool by which the full structure of Lorentz geometry to space time can be given, but beyond that the background - to speak pictorially - the subsoil for electromagnetic and matter waves, too. The tool could be useful to describe the connections between various particles, electromagnetism and gravity and to compute observables which were not theoretically related, up to now. Moreover, the tool is simpler than the Riemann tensor: it consists just of a set S of line segments in space time, briefly speaking. (orig.) [de

  3. Space education in Kiruna, Northern Sweden

    Directory of Open Access Journals (Sweden)

    I. Sandahl

    2005-01-01

    Full Text Available The town of Kiruna in the north of Sweden has a concentration of space activities and space research with, for example, the Swedish Institute of Space Physics, Esrange, the ESA Salmijärvi satellite station, and EISCAT (European Incoherent Scatter Radar Scientific Association. The Department of Space Science is a joint department between the two most northern universities in Sweden, Luleå University of Technology and Umeå University in collaboration with the Swedish Institute of Space Physics. It offers a range of education programmes in the space field. There are bachelor and master programmes in space engineering, and a bridging programme for students without a science background from secondary school. The Department also contributes to courses for teachers, Ph.D. courses and secondary school level courses. One master´s program and a three week summer course are given entirely in English and welcome international students. Thanks to good cooperation with Esrange students can build and fly experiments on high altitude balloons and sounding rockets and also take a large responsibility for the management of the projects. Close interaction with research and industry is an important part of the education.

  4. Fusion Simulation Program

    International Nuclear Information System (INIS)

    Greenwald, Martin

    2011-01-01

    Many others in the fusion energy and advanced scientific computing communities participated in the development of this plan. The core planning team is grateful for their important contributions. This summary is meant as a quick overview the Fusion Simulation Program's (FSP's) purpose and intentions. There are several additional documents referenced within this one and all are supplemental or flow down from this Program Plan. The overall science goal of the DOE Office of Fusion Energy Sciences (FES) Fusion Simulation Program (FSP) is to develop predictive simulation capability for magnetically confined fusion plasmas at an unprecedented level of integration and fidelity. This will directly support and enable effective U.S. participation in International Thermonuclear Experimental Reactor (ITER) research and the overall mission of delivering practical fusion energy. The FSP will address a rich set of scientific issues together with experimental programs, producing validated integrated physics results. This is very well aligned with the mission of the ITER Organization to coordinate with its members the integrated modeling and control of fusion plasmas, including benchmarking and validation activities. (1). Initial FSP research will focus on two critical Integrated Science Application (ISA) areas: ISA1, the plasma edge; and ISA2, whole device modeling (WDM) including disruption avoidance. The first of these problems involves the narrow plasma boundary layer and its complex interactions with the plasma core and the surrounding material wall. The second requires development of a computationally tractable, but comprehensive model that describes all equilibrium and dynamic processes at a sufficient level of detail to provide useful prediction of the temporal evolution of fusion plasma experiments. The initial driver for the whole device model will be prediction and avoidance of discharge-terminating disruptions, especially at high performance, which are a critical

  5. Plasma Simulation Program

    Energy Technology Data Exchange (ETDEWEB)

    Greenwald, Martin

    2011-10-04

    Many others in the fusion energy and advanced scientific computing communities participated in the development of this plan. The core planning team is grateful for their important contributions. This summary is meant as a quick overview the Fusion Simulation Program's (FSP's) purpose and intentions. There are several additional documents referenced within this one and all are supplemental or flow down from this Program Plan. The overall science goal of the DOE Office of Fusion Energy Sciences (FES) Fusion Simulation Program (FSP) is to develop predictive simulation capability for magnetically confined fusion plasmas at an unprecedented level of integration and fidelity. This will directly support and enable effective U.S. participation in International Thermonuclear Experimental Reactor (ITER) research and the overall mission of delivering practical fusion energy. The FSP will address a rich set of scientific issues together with experimental programs, producing validated integrated physics results. This is very well aligned with the mission of the ITER Organization to coordinate with its members the integrated modeling and control of fusion plasmas, including benchmarking and validation activities. [1]. Initial FSP research will focus on two critical Integrated Science Application (ISA) areas: ISA1, the plasma edge; and ISA2, whole device modeling (WDM) including disruption avoidance. The first of these problems involves the narrow plasma boundary layer and its complex interactions with the plasma core and the surrounding material wall. The second requires development of a computationally tractable, but comprehensive model that describes all equilibrium and dynamic processes at a sufficient level of detail to provide useful prediction of the temporal evolution of fusion plasma experiments. The initial driver for the whole device model will be prediction and avoidance of discharge-terminating disruptions, especially at high performance, which are a

  6. Grounding word learning in space.

    Directory of Open Access Journals (Sweden)

    Larissa K Samuelson

    Full Text Available Humans and objects, and thus social interactions about objects, exist within space. Words direct listeners' attention to specific regions of space. Thus, a strong correspondence exists between where one looks, one's bodily orientation, and what one sees. This leads to further correspondence with what one remembers. Here, we present data suggesting that children use associations between space and objects and space and words to link words and objects--space binds labels to their referents. We tested this claim in four experiments, showing that the spatial consistency of where objects are presented affects children's word learning. Next, we demonstrate that a process model that grounds word learning in the known neural dynamics of spatial attention, spatial memory, and associative learning can capture the suite of results reported here. This model also predicts that space is special, a prediction supported in a fifth experiment that shows children do not use color as a cue to bind words and objects. In a final experiment, we ask whether spatial consistency affects word learning in naturalistic word learning contexts. Children of parents who spontaneously keep objects in a consistent spatial location during naming interactions learn words more effectively. Together, the model and data show that space is a powerful tool that can effectively ground word learning in social contexts.

  7. Isometric Reflection Vectors and Characterizations of Hilbert Spaces

    Directory of Open Access Journals (Sweden)

    Donghai Ji

    2014-01-01

    Full Text Available A known characterization of Hilbert spaces via isometric reflection vectors is based on the following implication: if the set of isometric reflection vectors in the unit sphere SX of a Banach space X has nonempty interior in SX, then X is a Hilbert space. Applying a recent result based on well-known theorem of Kronecker from number theory, we improve this by substantial reduction of the set of isometric reflection vectors needed in the hypothesis.

  8. On English Locative Subjects

    Directory of Open Access Journals (Sweden)

    Gabriela Brůhová

    2017-07-01

    Full Text Available The paper analyses English sentences with thematic locative subjects. These subjects were detected as translation counterparts of Czech sentenceinitial locative adverbials realized by prepositional phrases with the prepositions do (into, na (on, v/ve (in, z/ze (from complemented by a noun. In the corresponding English structure, the initial scene-setting adverbial is reflected in the thematic subject, which results in the locative semantics of the subject. The sentences are analysed from syntactic, semantic and FSP aspects. From the syntactic point of view, we found five syntactic patterns of the English sentences with a locative subject (SV, SVA, SVO, SVpassA and SVCs that correspond to Czech sentences with initial locative adverbials. On the FSP level the paper studies the potential of the sentences to implement the Presentation or Quality Scale. Since it is the “semantic content of the verb that actuates the presentation semantics of the sentence” (Duškova, 2015a: 260, major attention is paid to the syntactic-semantic structure of the verb. The analysis of the semantics of the English sentences results in the identification of two semantic classes of verbs which co-occur with the English locative subject.

  9. DIAGNOSIS LIMA PENYAKIT UTAMA KARENA JAMUR PADA 100 KULTIVAR BIBIT PISANG

    Directory of Open Access Journals (Sweden)

    Loekas Soesanto

    2013-09-01

    Full Text Available The research which aimed to identify main pathogenic fungi of 100 banana seedling cultivars and their disease intensity was carried out at the Laboratory of Plant Disease, Faculty of Agriculture, Jenderal Soedirman University with samples and field data taking at Indonesian Insitute of Science  Bogor.  This descriptive research was started by taking samples and field data followed by identification of pathogenic fungi at the laboratory.  Variables observed were disease symptoms, colony and pathogenic morphology, kinds of the pathogen, disease intensity, and physical data.  Result of the research showed that there were five main pathogenic fungi of the banana seedlings, i.e., Fusarium oxysporum Schlecht. f.sp. cubense, causing Fusarium wilt; Mychosphaerella musicola Mulder, causing Mycosphaerella leaf spot or Sigatoka; Cordana musae (Zimm. Hohn., causing Cordana leaf spot; Curvularia lunata, causing leaf spot; and Cladosporium musae Mason, causing speckle.  From 100 banana seedling cultivars observed, Fusarium oxysporum f.sp. cubense was the most frequently found with the intensity of 1.4-72%, followed by Curvularia lunata, Mychosphaerella musicola, Cladosporium Musae, and Cordana musae with the intensity of 1-32, 2-18, 2-24, and 3-23%, respectively.

  10. A INTERAÇÃO USUÁRIO X JORNAL EM UM SITE DE REDE SOCIAL: INDÍCIOS DE UMA MUDANÇA

    Directory of Open Access Journals (Sweden)

    Mabel Oliveira Teixeira

    2014-06-01

    Full Text Available O presente artigo visa estabelecer uma discussão acerca da relação entre usuário x jornal no ciberespaço ou, mais especificamente, na ferramenta de Comunicação Mediada por Computador (CMC, o site de rede social (SRS Facebook. Para estabelecer tal discussão, este trabalho partiu à exploração das interações entre usuários do Facebook e um veículo jornalístico de expressão nacional, a Folha de São Paulo (FSP, através dos procedimentos metodológicos defendidos pela Teoria Fundamentada ou Fundada (TF. Sendo assim, realizou-se a coleta manual de uma notícia divulgada pela FSP no Facebook e dos 207 comentários que a seguiram. A análise e sistematização dos dados serviu à consolidação do debate pretendido e à indicação de mudanças sociais que deslocam o jornalismo de sua posição de como organizador legitimado da própria experiência humana.

  11. A interação usuário x jornal em um site de rede social: indícios de uma mudança

    Directory of Open Access Journals (Sweden)

    Mabel Oliveira Teixeira

    2014-06-01

    Full Text Available O presente artigo visa estabelecer uma discussão acerca da relação entre usuário x jornal no ciberespaço ou, mais especificamente, na ferramenta de Comunicação Mediada por Computador (CMC, o site de rede social (SRS Facebook. Para estabelecer tal discussão, este trabalho partiu à exploração das interações entre usuários do Facebook e um veículo jornalístico de expressão nacional, a Folha de São Paulo (FSP, através dos procedimentos metodológicos defendidos pela Teoria Fundamentada ou Fundada (TF. Sendo assim, realizou-se a coleta manual de uma notícia divulgada pela FSP no Facebook e dos 207 comentários que a seguiram. A análise e sistematização dos dados serviu à consolidação do debate pretendido e à indicação de mudanças sociais que deslocam o jornalismo de sua posição de como organizador legitimado da própria experiência humana.

  12. Magnesium and Space Flight

    Directory of Open Access Journals (Sweden)

    Scott M. Smith

    2015-12-01

    Full Text Available Magnesium is an essential nutrient for muscle, cardiovascular, and bone health on Earth, and during space flight. We sought to evaluate magnesium status in 43 astronauts (34 male, 9 female; 47 ± 5 years old, mean ± SD before, during, and after 4–6-month space missions. We also studied individuals participating in a ground analog of space flight (head-down-tilt bed rest; n = 27 (17 male, 10 female, 35 ± 7 years old. We evaluated serum concentration and 24-h urinary excretion of magnesium, along with estimates of tissue magnesium status from sublingual cells. Serum magnesium increased late in flight, while urinary magnesium excretion was higher over the course of 180-day space missions. Urinary magnesium increased during flight but decreased significantly at landing. Neither serum nor urinary magnesium changed during bed rest. For flight and bed rest, significant correlations existed between the area under the curve of serum and urinary magnesium and the change in total body bone mineral content. Tissue magnesium concentration was unchanged after flight and bed rest. Increased excretion of magnesium is likely partially from bone and partially from diet, but importantly, it does not come at the expense of muscle tissue stores. While further study is needed to better understand the implications of these findings for longer space exploration missions, magnesium homeostasis and tissue status seem well maintained during 4–6-month space missions.

  13. SWIFF: Space weather integrated forecasting framework

    Directory of Open Access Journals (Sweden)

    Frederiksen Jacob Trier

    2013-02-01

    Full Text Available SWIFF is a project funded by the Seventh Framework Programme of the European Commission to study the mathematical-physics models that form the basis for space weather forecasting. The phenomena of space weather span a tremendous scale of densities and temperature with scales ranging 10 orders of magnitude in space and time. Additionally even in local regions there are concurrent processes developing at the electron, ion and global scales strongly interacting with each other. The fundamental challenge in modelling space weather is the need to address multiple physics and multiple scales. Here we present our approach to take existing expertise in fluid and kinetic models to produce an integrated mathematical approach and software infrastructure that allows fluid and kinetic processes to be modelled together. SWIFF aims also at using this new infrastructure to model specific coupled processes at the Solar Corona, in the interplanetary space and in the interaction at the Earth magnetosphere.

  14. HUMAN SPACE FLIGHTS: FACTS AND DREAMS

    Directory of Open Access Journals (Sweden)

    Mariano Bizzarri

    2011-12-01

    Full Text Available Manned space flight has been the great human and technological adventure of the past half-century. By putting people into places and situations unprecedented in history, it has stirred the imagination while expanding and redefining the human experience. However, space exploration obliges men to confront a hostile environment of cosmic radiation, microgravity, isolation and changes in the magnetic field. Any space traveler is therefore submitted to relevant health threats. In the twenty-first century, human space flight will continue, but it will change in the ways that science and technology have changed on Earth: it will become more networked, more global, and more oriented toward primary objectives. A new international human space flight policy can help achieve these objectives by clarifying the rationales, the ethics of acceptable risk, the role of remote presence, and the need for balance between funding and ambition to justify the risk of human lives.

  15. Spaces an introduction to real analysis

    CERN Document Server

    Lindstrøm, Tom L

    2017-01-01

    Spaces is a modern introduction to real analysis at the advanced undergraduate level. It is forward-looking in the sense that it first and foremost aims to provide students with the concepts and techniques they need in order to follow more advanced courses in mathematical analysis and neighboring fields. The only prerequisites are a solid understanding of calculus and linear algebra. Two introductory chapters will help students with the transition from computation-based calculus to theory-based analysis. The main topics covered are metric spaces, spaces of continuous functions, normed spaces, differentiation in normed spaces, measure and integration theory, and Fourier series. Although some of the topics are more advanced than what is usually found in books of this level, care is taken to present the material in a way that is suitable for the intended audience: concepts are carefully introduced and motivated, and proofs are presented in full detail. Applications to differential equations and Fourier analysis ...

  16. Phase space diffusion in turbulent plasmas

    International Nuclear Information System (INIS)

    Pecseli, H.L.

    1990-01-01

    Turbulent diffusion of charged test particles in electrostatic plasma turbulence is reviewed. Two different types of test particles can be distinguished. First passice particles which are subject to the fluctuating electric fields without themselves contributing to the local space charge. The second type are particles introduced at a prescribed phase space position at a certain time and which then self-consistently participate in the phase space dynamics of the turbulent. The latter ''active'' type of particles can be subjected to an effective frictional force due to radiation of plasma waves. In terms of these test particle types, two basically different problems can be formulated. One deals with the diffusion of a particle with respect to its point of release in phase space. Alternatively the relative diffusion between many, or just two, particles can be analyzed. Analytical expressions for the mean square particle displacements in phase space are discussed. More generally equations for the full probability densities are derived and these are solved analytically in special limits. (orig.)

  17. Operator Arithmetic-Harmonic Mean Inequality on Krein Spaces

    Directory of Open Access Journals (Sweden)

    M. Dehghani

    2014-03-01

    Full Text Available We prove an operator arithmetic-harmonic mean type inequality in Krein space setting, by using some block matrix techniques of indefinite type. We also give an example which shows that the operator arithmetic-geometric-harmonic mean inequality for two invertible selfadjoint operators on Krein spaces is not valid, in general.

  18. Inclusive Innovation in Biohacker Spaces: The Role of Systems and Networks

    Directory of Open Access Journals (Sweden)

    Jeremy de Beer

    2018-02-01

    Full Text Available In this article, we examine the development of biohacker spaces and their impact on innovation systems through the lens of inclusive innovation. Examining issues associated with people, activities, outcomes, and governance, we observe that biohacker spaces offer an alternative approach to biotechnological research outside the orthodox walls of academia, industry, and government. We explain that harnessing the full innovative potential of these spaces depends on flexible legal and regulatory systems, including appropriate biosafety regulations and intellectual property policies and practices, and organic, community-based social and financial networking.

  19. Strichartz estimates on $alpha$-modulation spaces

    Directory of Open Access Journals (Sweden)

    Weichao Guo

    2013-05-01

    Full Text Available In this article, we consider some dispersive equations, including Schrodinger equations, nonelliptic Schrodinger equations, and wave equations. We develop some Strichartz estimates in the frame of alpha-modulation spaces.

  20. Design and Test of Advanced Thermal Simulators for an Alkali Metal-Cooled Reactor Simulator

    Science.gov (United States)

    Garber, Anne E.; Dickens, Ricky E.

    2011-01-01

    The Early Flight Fission Test Facility (EFF-TF) at NASA Marshall Space Flight Center (MSFC) has as one of its primary missions the development and testing of fission reactor simulators for space applications. A key component in these simulated reactors is the thermal simulator, designed to closely mimic the form and function of a nuclear fuel pin using electric heating. Continuing effort has been made to design simple, robust, inexpensive thermal simulators that closely match the steady-state and transient performance of a nuclear fuel pin. A series of these simulators have been designed, developed, fabricated and tested individually and in a number of simulated reactor systems at the EFF-TF. The purpose of the thermal simulators developed under the Fission Surface Power (FSP) task is to ensure that non-nuclear testing can be performed at sufficiently high fidelity to allow a cost-effective qualification and acceptance strategy to be used. Prototype thermal simulator design is founded on the baseline Fission Surface Power reactor design. Recent efforts have been focused on the design, fabrication and test of a prototype thermal simulator appropriate for use in the Technology Demonstration Unit (TDU). While designing the thermal simulators described in this paper, effort were made to improve the axial power profile matching of the thermal simulators. Simultaneously, a search was conducted for graphite materials with higher resistivities than had been employed in the past. The combination of these two efforts resulted in the creation of thermal simulators with power capacities of 2300-3300 W per unit. Six of these elements were installed in a simulated core and tested in the alkali metal-cooled Fission Surface Power Primary Test Circuit (FSP-PTC) at a variety of liquid metal flow rates and temperatures. This paper documents the design of the thermal simulators, test program, and test results.

  1. CSIR eNews: Space technology

    CSIR Research Space (South Africa)

    CSIR

    2008-03-01

    Full Text Available The CSIR Satellite Applications Centre is a key component of the CSIR's efforts to maximise the benefit of information, communications and space technology for industry and society. The centre at Hartebeesthoek is located some 70 km west of Pretoria...

  2. CSIR eNews: Space technology

    CSIR Research Space (South Africa)

    CSIR

    2009-09-01

    Full Text Available The CSIR Satellite Applications Centre is a key component of the CSIR's efforts to maximise the benefit of information, communications and space technology for industry and society. The centre at Hartebeesthoek is located some 70 km west of Pretoria...

  3. CSIR eNews: Space technology

    CSIR Research Space (South Africa)

    CSIR

    2007-12-01

    Full Text Available The CSIR Satellite Applications Centre is a key component of the CSIR's efforts to maximise the benefit of information, communications and space technology for industry and society. The centre at Hartebeesthoek is located some 70 km west of Pretoria...

  4. CSIR eNews: Space technology

    CSIR Research Space (South Africa)

    CSIR

    2008-12-01

    Full Text Available The CSIR Satellite Applications Centre is a key component of the CSIR's efforts to maximise the benefit of information, communications and space technology for industry and society. The centre at Hartebeesthoek is located some 70 km west of Pretoria...

  5. Full-Duplex Digital Communication on a Single Laser Beam

    Science.gov (United States)

    Hazzard, D. A.; MacCannell, J. A.; Lee, G.; Selves, E. R.; Moore, D.; Payne, J. A.; Garrett, C. D.; Dahlstrom, N.; Shay, T. M.

    2006-01-01

    A proposed free-space optical communication system would operate in a full-duplex mode, using a single constant-power laser beam for transmission and reception of binary signals at both ends of the free-space optical path. The system was conceived for two-way data communication between a ground station and a spacecraft in a low orbit around the Earth. It has been estimated that in this application, a data rate of 10 kb/s could be achieved at a ground-station-to-spacecraft distance of 320 km, using a laser power of only 100 mW. The basic system concept is also applicable to terrestrial free-space optical communications. The system (see figure) would include a diode laser at one end of the link (originally, the ground station) and a liquid-crystal- based retroreflecting modulator at the other end of the link (originally, the spacecraft). At the laser end, the beam to be transmitted would be made to pass through a quarter-wave plate, which would convert its linear polarization to right circular polarization. For transmission of data from the laser end to the retroreflector end, the laser beam would be modulated with subcarrier phase-shift keying (SC-PSK). The transmitted beam would then pass through an aperture- sharing element (ASE) - basically, a mirror with a hole in it, used to separate the paths of the transmitted and received light beams. The transmitted beam would continue outward through a telescope (which, in the original application, would be equipped with a spacecraft-tracking system) that would launch the transmitted beam along the free-space optical path to the retroreflector end.

  6. Quantum field theory in curved space-time

    Energy Technology Data Exchange (ETDEWEB)

    Davies, P C.W. [King' s Coll., London (UK)

    1976-09-30

    It is stated that recent theoretical developments indicate that the presence of gravity (curved space-time) can give rise to important new quantum effects, such as cosmological particle production and black-hole evaporation. These processes suggest intriguing new relations between quantum theory, thermodynamics and space-time structure and encourage the hope that a better understanding of a full quantum theory of gravity may emerge from this approach.

  7. Deep Space Habitat Concept Demonstrator

    Science.gov (United States)

    Bookout, Paul S.; Smitherman, David

    2015-01-01

    This project will develop, integrate, test, and evaluate Habitation Systems that will be utilized as technology testbeds and will advance NASA's understanding of alternative deep space mission architectures, requirements, and operations concepts. Rapid prototyping and existing hardware will be utilized to develop full-scale habitat demonstrators. FY 2014 focused on the development of a large volume Space Launch System (SLS) class habitat (Skylab Gen 2) based on the SLS hydrogen tank components. Similar to the original Skylab, a tank section of the SLS rocket can be outfitted with a deep space habitat configuration and launched as a payload on an SLS rocket. This concept can be used to support extended stay at the Lunar Distant Retrograde Orbit to support the Asteroid Retrieval Mission and provide a habitat suitable for human missions to Mars.

  8. Public Space and Plurality of Beliefs

    Directory of Open Access Journals (Sweden)

    Francesc Rovira i Llopart

    2007-06-01

    Full Text Available In this work, the author deals with how the issue of religion can be managed in the public space. For this, he wonders and argues whether or not the public space should be a homogeneous space from the point of view of convictions or if it can give room to heterogeneousexpressions, stemming from the plurality of profound convictions existing among the citizens. In addition, he lays out the concept of public space, discusses its “contaminations” and focuses fundamentally on its meaning as a place in which the supply, exchangeand debate of ideas, principles, intuitions, etc. are openly developed, although he devotes a little bit of attention to their most tangible or physical aspects. And he underscores the idea that in a context of democratically chosen public powers and a secular institutional framework, there should not exist privileges nor discriminations.

  9. Hankel transforms in generalized Fock spaces

    Directory of Open Access Journals (Sweden)

    John Schmeelk

    1994-01-01

    Full Text Available A classical Fock space consists of functions of the form,ϕ↔(ϕ0,ϕ1,…,ϕq,where ϕ0∈ℂ and ϕq∈Lp(ℝq, q≥1. We will replace the ϕq, q≥1 with test functions having Hankel transforms. This space is a natural generalization of a classical Fock space as seen by expanding functionals having abstract Taylor Series. The particular coefficients of such series are multilinear functionals having distributions as their domain. Convergence requirements set forth are somewhat in the spirit of ultra differentiable functions and ultra distribution theory. The Hankel transform oftentimes implemented in Cauchy problems will be introduced into this setting. A theorem will be proven relating the convergence of the transform to the inductive limit parameter, s, which sweeps out a scale of generalized Fock spaces.

  10. Investigation on the effect of Friction Stir Processing Parameters on Micro-structure and Micro-hardness of Rice Husk Ash reinforced Al6061 Metal Matrix Composites

    Science.gov (United States)

    Fatchurrohman, N.; Farhana, N.; Marini, C. D.

    2018-03-01

    Friction stir processing (FSP) is an alternative way to produce the surface composites of aluminium alloy in order to modify the microstructure and improve the mechanical properties. In this experiment, Al6061 aluminium alloy has been chosen to be used as the matrix base plate for the FSP. Al606 has potential for the use in advanced application but it has low wear resistance. While, the reinforced used was rice husk ash (RHA) in order to produce surface composites which increased the micro hardness of the plate composites. The Al6061 was stirred individually and with 5 weight % of RHA at three different tool rotational speeds of 800 rpm, 1000 rpm and 1200 rpm. After running the FSP, the result in the distribution of particles and the micro hardness of the specimens were identified. The result showed that Al6061 plate with the existing 5 weight % of RHA reinforced at the highest of tool rotational speeds of 1200rpm has the best distribution of particles and the highest result in average of micro hardness with 80Hv.

  11. Collective space of high-rise housing complex

    Directory of Open Access Journals (Sweden)

    Bakaeva Tatyana

    2018-01-01

    Full Text Available The article considers the problems of support of citizens a comfortable living environment in the conditions of the limited territory of the megalopolis, the typological principles of formation of space-planning structure high-rise residence complexes with public space. The collective space for residents of high-rise housing estates on the example of international experience of design and construction is in detail considered. The collective space and the area of the standard apartment are analysed on comfort classes: a social - complex Pinnacle @ Duxton, a business - Monde Condos and an elite - Hamilton Scotts. Interdependence the area of the standard flat and the total area of housing collective space, in addiction on the comfort level, is revealed. In the conditions of high-density urban development, the collective space allows to form the comfortable environment for accommodation. The recommendations for achievement of integrity and improvement of quality of the city environment are made. The convenient collective space makes a contribution to civil policy, it creates the socializing sense of interaction of residents, coagulates social effect.

  12. NiTi bonded space regainer/maintainer

    Directory of Open Access Journals (Sweden)

    Negi K

    2010-06-01

    Full Text Available Early orthodontic interventions are often initiated in the developing dentition to promote favorable developmental changes. Interceptive orthodontic can eliminate or reduce the severity of a developing malocclusion, the complexity of orthodontic treatment, overall treatment time and cost. Premature loss of deciduous tooth or teeth can often destroy the integrity of normal occlusion. There are many space regaining and maintaining devices mentioned in literature. In this article, I present a simple space regaining method by a piece of nickel titanium (NiTi wire bonded between the teeth in active loop form, and the unique shape memory property of NiTi wire will upright or move the teeth and the lost space can be regained easily.

  13. THE CHALLENGING DREAM OF PLANTS IN SPACE

    Directory of Open Access Journals (Sweden)

    Carmela Rosaria Guadagno

    2012-06-01

    Full Text Available Plants are essential components of Bioregenerative Life Support Systems (BLSS because they provide fresh food, produce oxygen, uptake CO2 from air and purify waste water via the leaf transpiration processes. In the consideration of long-duration human space missions, the issue of food production is becoming increasingly important. Therefore the possibility of growing plants in space represents the challenge for human space missions on the Moon and Mars and is related to the development of appropriate BLSS. Key issues include food production, nutritional needs, hydroponic techniques, horticultural requirements, waste processing and engineering systems.

  14. A note on tensor fields in Hilbert spaces

    Directory of Open Access Journals (Sweden)

    LEONARDO BILIOTTI

    2002-06-01

    Full Text Available We discuss and extend to infinite dimensional Hilbert spaces a well-known tensoriality criterion for linear endomorphisms of the space of smooth vector fields in n.Discutimos e estendemos para espaços de Hilbert um critério de tensorialidade para endomorfismos do espaço dos campos vetoriais em Rpot(n.

  15. Phase transitions in de Sitter space

    Directory of Open Access Journals (Sweden)

    Alexander Vilenkin

    1983-10-01

    Full Text Available An effective potential in de Sitter space is calculated for a model of two interacting scalar fields in one-loop approximation and in a self-consistent approximation which takes into account an infinite set of diagrams. Various approaches to renormalization in de Sitter space are discussed. The results are applied to analyze the phase transition in the Hawking-Moss version of the inflationary universe scenario. Requiring that inflation is sufficiently large, we derive constraints on the parameters of the model.

  16. A notion of continuity in discrete spaces and applications

    Directory of Open Access Journals (Sweden)

    Valerio Capraro

    2013-04-01

    Full Text Available We propose a notion of continuous path for locally finite metric spaces, taking inspiration from the recent development of A-theory for locally finite connected graphs. We use this notion of continuity to derive an analogue in Z2 of the Jordan curve theorem and to extend to a quite large class of locally finite metric spaces (containing all finite metric spaces an inequality for the ℓp-distortion of a metric space that has been recently proved by Pierre-Nicolas Jolissaint and Alain Valette for finite connected graphs.

  17. Transatlantic Cooperation in Space: Eu-Canada Free Trade Agreement

    Directory of Open Access Journals (Sweden)

    Luise Weber-Steinhaus

    2014-12-01

    Full Text Available National governments are keenly aware of the need for investment in space. Canada, as a formal cooperating state in the European Space Agency (ESA, and Germany, as a leading member state of ESA, are interlinked in Europe’s space endeavours. Beyond ESA, Germany and Canada additionally have a strong history of bilateral cooperation on a range of space projects. This paper discusses the novel interdependencies between clear national and now supranational space policies, using the examples of the Canada-European Union (EU Comprehensive Economic and Trade Agreement (CETA. The agreement covers most aspects of the EU-Canada bilateral economic relationship and includes space. The paper focuses on international space policies, strategic bilateral co-operation, and technical accomplishments. It takes a closer look at German-Canadian collaboration in space programs and offers some reflection on the effect of both the EU and ESA’S transatlantic involvement in space.

  18. Synchronizing the city with human-based spaces

    Directory of Open Access Journals (Sweden)

    Gyergyák János

    2018-03-01

    Full Text Available The paper is about to summarize the most important development tools to make the urban spaces more human friendly in Denver, Colorado. There are more needs for having more livable and sustainable areas by reducing the use of automobiles and focusing on multimodal street design. The strategies are the basic elements to make our urban spaces better and happier from The United States to Hungary

  19. Full-thickness skin mesh graft vaginoplasty: a skin sparing technique

    Directory of Open Access Journals (Sweden)

    Guilherme Lang Motta

    Full Text Available ABSTRACT Introduction: The ideal vaginoplasty method should promote good cosmetic and functional results with low morbidity. We describe a new technique for congenital vaginal agenesis using a full-thickness perforated skin graft. Materials and Methods: We report an 18 year old patient with vaginal agenesis (Morris syndrome that undergone a modified version of McIndoe vaginoplasty. Patient is set in a low lithotomy position and lateral traction sutures are placed in labia and a 16Fr urethral catheter inserted. An inverted “V”-shaped incision is made in the mucosal plaque below the urethra. Blunt dissection in a cephalic posterior direction forms a space between the rectum and urethra. Special care is taken to avoid rectal tear during this maneuver. A full-thickness skin graft is removed from the lower abdomen measuring 12.0×6.0cm as an aesthetic abdominoplasty. The fat tissue is removed, remaining epidermis and dermis and the graft is perforated, allowing a great surface increase. After suturing over a mold, the graft is fixed in the created space. The donor site is closed with intradermal transversal suture. Results: From January 2009 to August 2015, seven patients diagnosed with vaginal agenesis underwent this technique. There were no major complications or need for blood transfusions. At the six-month follow-up, all patients reported satisfactory sexual intercourse. There were no significant complications at donor site or neovagina that needed surgical intervention. Conclusion: Vaginal reconstruction using the perforated graft is viable with excellent functional results. Applying this modification, we yielded the good results of a classic McIndoe technique with lower donor site morbidity.

  20. Evaluation of the effects of subgingival injection of Simvastatin on space re-opening after orthodontic space closure in adults

    Directory of Open Access Journals (Sweden)

    Arezoo Jahanbin

    2016-03-01

    Full Text Available Background. This clinical trial evaluated the effect of Simvastatin on space re-opening after orthodontic space closure and its effect on the gingival index (GI and clinical attachment loss (CAL. Methods. 16 females, 25‒40 years old, with spaces between anterior mandibular teeth due to chronic periodontitis were participated in this study. The patients were randomly divided into control and experimental groups. In the experimental group, 1.2% Simvastatin gel and in the control group, 0.9% sodium chloride as a placebo was injected into the pocket depth of the six anterior teeth. The amount of space reopening, GI and CAL were measured. Results. No serious complications were observed during interventions and follow-up periods. Space re-opening was significantly reduced in patients receiving Simvastatin (P < 0.001. Moreover, GI reduction was significantly greater in Sim-vastatin group compared to the control group (P < 0.001. However, CAL did not demonstrate a significant difference between the groups. Conclusion. Simvastatin may decrease space re-opening after orthodontic space closure in human anterior teeth.

  1. Visco-elastic controlled-source full waveform inversion without surface waves

    Science.gov (United States)

    Paschke, Marco; Krause, Martin; Bleibinhaus, Florian

    2016-04-01

    We developed a frequency-domain visco-elastic full waveform inversion for onshore seismic experiments with topography. The forward modeling is based on a finite-difference time-domain algorithm by Robertsson that uses the image-method to ensure a stress-free condition at the surface. The time-domain data is Fourier-transformed at every point in the model space during the forward modeling for a given set of frequencies. The motivation for this approach is the reduced amount of memory when computing kernels, and the straightforward implementation of the multiscale approach. For the inversion, we calculate the Frechet derivative matrix explicitly, and we implement a Levenberg-Marquardt scheme that allows for computing the resolution matrix. To reduce the size of the Frechet derivative matrix, and to stabilize the inversion, an adapted inverse mesh is used. The node spacing is controlled by the velocity distribution and the chosen frequencies. To focus the inversion on body waves (P, P-coda, and S) we mute the surface waves from the data. Consistent spatiotemporal weighting factors are applied to the wavefields during the Fourier transform to obtain the corresponding kernels. We test our code with a synthetic study using the Marmousi model with arbitrary topography. This study also demonstrates the importance of topography and muting surface waves in controlled-source full waveform inversion.

  2. Active Space Debris Removal System

    Directory of Open Access Journals (Sweden)

    Gabriele GUERRA

    2017-06-01

    Full Text Available Since the start of the space era, more than 5000 launches have been carried out, each carrying satellites for many disparate uses, such as Earth observation or communication. Thus, the space environment has become congested and the problem of space debris is now generating some concerns in the space community due to our long-lived belief that “space is big”. In the last few years, solutions to this problem have been proposed, one of those is Active Space Debris Removal: this method will reduce the increasing debris growth and permit future sustainable space activities. The main idea of the method proposed below is a drag augmentation system: use a system capable of putting an expanded foam on a debris which will increase the area-to-mass ratio to increase the natural atmospheric drag and solar pressure. The drag augmentation system proposed here requires a docking system; the debris will be pushed to its release height and then, after un-docking, an uncontrolled re-entry takes place ending with a burn up of the object and the foam in the atmosphere within a given time frame. The method requires an efficient way to change the orbit between two debris. The present paper analyses such a system in combination with an Electric Propulsion system, and emphasizes the choice of using two satellites to remove five effective rockets bodies debris within a year.

  3. Canadian space agency discipline working group for space dosimetry and radiation science

    International Nuclear Information System (INIS)

    Waker, Anthony; Waller, Edward; Lewis, Brent; Bennett, Leslie; Conroy, Thomas

    2008-01-01

    Full text: One of the great technical challenges in the human and robotic exploration of space is the deleterious effect of radiation on humans and physical systems. The magnitude of this challenge is broadly understood in terms of the sources of radiation, however, a great deal remains to be done in the development of instrumentation, suitable for the space environment, which can provide real-time monitoring of the complex radiation fields encountered in space and a quantitative measure of potential biological risk. In order to meet these research requirements collaboration is needed between experimental nuclear instrumentation scientists, theoretical scientists working on numerical modeling techniques and radiation biologists. Under the auspices of the Canadian Space Agency such a collaborative body has been established as one of a number of Discipline Working Groups. Members of the Space Dosimetry and Radiation Science working group form a collaborative network across Canada including universities, government laboratories and the industrial sector. Three central activities form the core of the Space Dosimetry and Radiation Science DWG. An instrument sub-group is engaged in the development of instruments capable of gamma ray, energetic charged particle and neutron dosimetry including the ability to provide dosimetric information in real-time. A second sub-group is focused on computer modeling of space radiation fields in order to assess the performance of conceptual designs of detectors and dosimeters or the impact of radiation on cellular and sub-cellular biological targets and a third sub-group is engaged in the study of the biological effects of space radiation and the potential of biomarkers as a method of assessing radiation impact on humans. Many working group members are active in more than one sub-group facilitating communication throughout the whole network. A summary progress-report will be given of the activities of the Discipline Working Group and the

  4. Non-Homogenous Moral Space (from Bentham toSen

    Directory of Open Access Journals (Sweden)

    Piotr (Peter Boltuc

    2013-12-01

    Full Text Available The notion of moral space covers all thin (universal and thick (particular characteristics that may plausibly be seen as morally relevant. In this paper, I investigate certain properties of moral space so defined. These properties are not easily visible if we analyze moral characteristics individually, but become clear once we consider them collectively. In particular, following Amartya Sen, I claim that the value of moral properties is, in part, a function of positional characteristics. I call this notion the non-homogeneity of moral space.

  5. Influence of Stored Strain on Fabricating of Al/SiC Nanocomposite by Friction Stir Processing

    Science.gov (United States)

    Khorrami, M. Sarkari; Kazeminezhad, M.; Kokabi, A. H.

    2015-05-01

    In this work, 1050 aluminum (Al) sheets were annealed and severely deformed by 1, 2, and 3 passes of constrained groove pressing process to obtain the various initial stored strain values of 0, 1.16, 2.32, and 3.48, respectively. Friction stir processing (FSP) was then applied using SiC nanoparticles to fabricate Al/SiC nanocomposite with approximately 1.5 vol pct reinforced particles. Microstructural examinations revealed that an increase in the initial stored strain of the base metal led to the formation of finer grain structure after 1 pass of FSP. The finer grain structure occurred in the stir zone where a sufficient amount of nanoparticles with a relatively proper distribution existed. However, the initial stored strain value had a contrary influence in the regions with low volume fraction of nanoparticles. In fact, more stored strain in the base metal provided more driving force for both nucleation and grain growth of newly recrystallized grains at the stir zone. Pinning effect of well-distributed nanoparticles could effectively retard grain growth leading to the formation of very fine grain structure. Also it was observed that the initial stored strain values did not have impressive rule in the microstructural evolutions at the stir zone during the second and third FSP passes signifying that all of the stored energy in the base metal would be released after 1 pass of FSP. The results obtained with microhardness measurement at the stir zone were fairly in agreement with those achieved by the microstructure assessments.

  6. Heuristic space diversity management in a meta-hyper-heuristic framework

    CSIR Research Space (South Africa)

    Grobler, J

    2014-07-01

    Full Text Available This paper introduces the concept of heuristic space diversity and investigates various strategies for the management of heuristic space diversity within the context of a meta-hyper-heuristic algorithm. Evaluation on a diverse set of floating...

  7. Heuristic space diversity control for improved meta-hyper-heuristic performance

    CSIR Research Space (South Africa)

    Grobler, J

    2015-04-01

    Full Text Available This paper expands on the concept of heuristic space diversity and investigates various strategies for the management of heuristic space diversity within the context of a meta-hyper-heuristic algorithm in search of greater performance benefits...

  8. On Some Isomorphisms between Bounded Linear Maps and Non-Commutative Lp-Spaces

    Directory of Open Access Journals (Sweden)

    E. J. Atto

    2014-04-01

    Full Text Available We define a particular space of bounded linear maps using a Von Neumann algebra and some operator spaces. By this, we prove some isomorphisms, and using interpolation in some particular cases, we get analogue of non-commutative Lp spaces.

  9. The Architectonic Experience of Body and Space in Augmented Interiors

    Directory of Open Access Journals (Sweden)

    Isabella Pasqualini

    2018-04-01

    Full Text Available The environment shapes our experience of space in constant interaction with the body. Architectonic interiors amplify the perception of space through the bodily senses; an effect also known as embodiment. The interaction of the bodily senses with the space surrounding the body can be tested experimentally through the manipulation of multisensory stimulation and measured via a range of behaviors related to bodily self-consciousness. Many studies have used Virtual Reality to show that visuotactile conflicts mediated via a virtual body or avatar can disrupt the unified subjective experience of the body and self. In the full-body illusion paradigm, participants feel as if the avatar was their body (ownership, self-identification and they shift their center of awareness toward the position of the avatar (self-location. However, the influence of non-bodily spatial cues around the body on embodiment remains unclear, and data about the impact of architectonic space on human perception and self-conscious states are sparse. We placed participants into a Virtual Reality arena, where large and narrow virtual interiors were displayed with and without an avatar. We then applied synchronous or asynchronous visuotactile strokes to the back of the participants and avatar, or, to the front wall of the void interiors. During conditions of illusory self-identification with the avatar, participants reported sensations of containment, drift, and touch with the architectonic environment. The absence of the avatar suppressed such feelings, yet, in the large space, we found an effect of continuity between the physical and the virtual interior depending on the full-body illusion. We discuss subjective feelings evoked by architecture and compare the full-body illusion in augmented interiors to architectonic embodiment. A relevant outcome of this study is the potential to dissociate the egocentric, first-person view from the physical point of view through augmented

  10. The Geostrategic, Techno-Nationalist Push Into Space

    Directory of Open Access Journals (Sweden)

    Joan Johnson-Freese

    2014-12-01

    Full Text Available The technological benefits of space hardware are universally recognized. One is hard pressed to find an area of the world where satellite dishes for television reception, satellite use for data transmission, or the Global Positioning System (GPS for multiple purposes are not utilized. But utilization of commercial or of other countries’ space assets does not equate to being a space-faring nation. Space-faring nations have, to varying degrees, their own capabilities. The importance of status as a space-faring nation comes from two sources: not having to rely on others for access to the benefits of space assets, and prestige that can translate into geopolitical influence. Beyond users and space-faring nations, there are those countries actively asserting space leadership in some form, whether regional or global. What pushes countries to go beyond being a spacefaring nation and assert leadership potential, including potentially engaging in an implicit or explicit space race, is techno-nationalism, which for the purposes of this paper refers to nationalism that becomes the impetus for technology development as an indicator of geostrategic power. It is often triggered by a threat or perception of a threat, including a threat to perceived leadership. Techno-nationalism carries with it an inherent quest for leadership, by some definition.

  11. Fixed Points of Expansive Type Mappings in 2-Banach Spaces

    Directory of Open Access Journals (Sweden)

    Prabha Chouhan

    2013-08-01

    Full Text Available In present paper, we define expansive mappings in 2-Banach space and prove some common unique fixed point theorems which are the extension of results of Wang et al. [12] and Rhoades [9] in 2-Banach space.

  12. Topological Schemas of Memory Spaces

    Directory of Open Access Journals (Sweden)

    Andrey Babichev

    2018-04-01

    Full Text Available Hippocampal cognitive map—a neuronal representation of the spatial environment—is widely discussed in the computational neuroscience literature for decades. However, more recent studies point out that hippocampus plays a major role in producing yet another cognitive framework—the memory space—that incorporates not only spatial, but also non-spatial memories. Unlike the cognitive maps, the memory spaces, broadly understood as “networks of interconnections among the representations of events,” have not yet been studied from a theoretical perspective. Here we propose a mathematical approach that allows modeling memory spaces constructively, as epiphenomena of neuronal spiking activity and thus to interlink several important notions of cognitive neurophysiology. First, we suggest that memory spaces have a topological nature—a hypothesis that allows treating both spatial and non-spatial aspects of hippocampal function on equal footing. We then model the hippocampal memory spaces in different environments and demonstrate that the resulting constructions naturally incorporate the corresponding cognitive maps and provide a wider context for interpreting spatial information. Lastly, we propose a formal description of the memory consolidation process that connects memory spaces to the Morris' cognitive schemas-heuristic representations of the acquired memories, used to explain the dynamics of learning and memory consolidation in a given environment. The proposed approach allows evaluating these constructs as the most compact representations of the memory space's structure.

  13. Space of solitude in culture

    Directory of Open Access Journals (Sweden)

    Agnieszka Małgorzata Kulig

    2014-04-01

    Full Text Available In my article I suggest looking at the phenomenon of solitude in culture not only as an opportunity to study an intimate and individual experience, to which numerous descriptions refer. I would rather consider whether possessing knowledge about this experience we acquire competencies regarding the culture in which this solitude has occurred. The discourse of melancholy, for which the space of solitude and confrontation with the ultimate has been the natural environment, supports me in describing the space of solitude in culture. For the purposes of reflection, I initiate my own definition of solitude as a space between life and death. That space allows the individual to feel the energy of life and the presence of death, even in such moments of human life (youth when the individual is not fully aware of their role in society, and is in the process of crystallizing their identity. In this case, solitude as a space between would be a state of suspension, which, however, prepares for active, independent life in the community. In this article, I refer to the postulate of the German culture researcher Thomas Macho in order to treat the experience of solitude as a context, an opportunity to practise techniques of culture, as well as to heterotopic space as defined by Michel Foucault.

  14. Space and commodity-based society

    Directory of Open Access Journals (Sweden)

    Gvozden Vladimir

    2015-01-01

    Full Text Available The space is privileged in the commodity-based society. It is well known that the economic space in the 19th and 20th centuries rapidly managed to subordinate all other areas 'conveying and instilling in them their own meanings and goals' (G. Milatović. A new form of space that qualifies commodity society was created, marked by dualities: openness-closeness, private-public, sameness-difference. This paper is an attempt to criticize the usual analysis of the categories of commodity-space, linked to the ambivalent role of the state as a guarantor of the functioning of the commodity-based society, as well as its controlling instance. The increasing delocalisation of the political changes the nature of the space in the commodity-based society. Privileged areas are produced that create an illusion of protection of consumers (shopping malls, gated communities, theme parks, video surveillance, while at the same time social differentiation and identification are produced through the symbolic order of commodities and a sense of inclusion or exclusion from that order. At the same time, the examples of tourism and selling places demonstrate that such a commodity-space unusually easy reconciles sameness and difference. It entails uniformity to help achieve the fluctuation of goods, while insisting on the local as different, especially in terms of the role of particularity in the global trade.

  15. Second order evolution inclusions governed by sweeping process in Banach spaces

    Directory of Open Access Journals (Sweden)

    A. G. Ibrahim

    2009-11-01

    Full Text Available In this paper we prove two existence theorems concerning the existence of solutions for second order evolution inclusions governed by sweeping process with closed convex sets depending on time and state in Banach spaces. This work extends some recent existence theorems cncerning sweeping process from Hilbert spaces to Banach spaces.

  16. Microscopical observations of Sphaerellopsis filum, a parasite of Puccinia recondita

    Directory of Open Access Journals (Sweden)

    Agnieszka Płachecka

    2012-12-01

    Full Text Available Sphaerellopsis filum is a well-known parasite associated with many species of rust fungi. It is of frequent occurrence as parasite of cereal rusts: Puccinia recondita, P. coronata, P. graminis, P. hordei and P. striiformis. Uredial sori of Puccinia recondita f.sp. tritici infected with Sphaerellopsis filum were examined by light and scanning microscope to determine morphology of hyperparasite as well as the parasite-hyperparasite contact. The microscopical examination of infected uredinia clearly showed the intimate connection of S. filum with its rust host.

  17. Time and Space in Digital Game Storytelling

    Directory of Open Access Journals (Sweden)

    Huaxin Wei

    2010-01-01

    Full Text Available The design and representation of time and space are important in any narrative form. Not surprisingly there is an extensive literature on specific considerations of space or time in game design. However, there is less attention to more systematic analyses that examine both of these key factors—including their dynamic interrelationship within game storytelling. This paper adapts critical frameworks of narrative space and narrative time drawn from other media and demonstrates their application in the understanding of game narratives. In order to do this we incorporate fundamental concepts from the field of game studies to build a game-specific framework for analyzing the design of narrative time and narrative space. The paper applies this framework against a case analysis in order to demonstrate its operation and utility. This process grounds the understanding of game narrative space and narrative time in broader traditions of narrative discourse and analysis.

  18. Realizing spaces as path-component spaces

    OpenAIRE

    Banakh, Taras; Brazas, Jeremy

    2018-01-01

    The path component space of a topological space $X$ is the quotient space $\\pi_0(X)$ whose points are the path components of $X$. We show that every Tychonoff space $X$ is the path-component space of a Tychonoff space $Y$ of weight $w(Y)=w(X)$ such that the natural quotient map $Y\\to \\pi_0(Y)=X$ is a perfect map. Hence, many topological properties of $X$ transfer to $Y$. We apply this result to construct a compact space $X\\subset \\mathbb{R}^3$ for which the fundamental group $\\pi_1(X,x_0)$ is...

  19. Strategic Technologies for Deep Space Transport

    Science.gov (United States)

    Litchford, Ronald J.

    2016-01-01

    Deep space transportation capability for science and exploration is fundamentally limited by available propulsion technologies. Traditional chemical systems are performance plateaued and require enormous Initial Mass in Low Earth Orbit (IMLEO) whereas solar electric propulsion systems are power limited and unable to execute rapid transits. Nuclear based propulsion and alternative energetic methods, on the other hand, represent potential avenues, perhaps the only viable avenues, to high specific power space transport evincing reduced trip time, reduced IMLEO, and expanded deep space reach. Here, key deep space transport mission capability objectives are reviewed in relation to STMD technology portfolio needs, and the advanced propulsion technology solution landscape is examined including open questions, technical challenges, and developmental prospects. Options for potential future investment across the full compliment of STMD programs are presented based on an informed awareness of complimentary activities in industry, academia, OGAs, and NASA mission directorates.

  20. Space Fission System Test Effectiveness

    International Nuclear Information System (INIS)

    Houts, Mike; Schmidt, Glen L.; Van Dyke, Melissa; Godfroy, Tom; Martin, James; Bragg-Sitton, Shannon; Dickens, Ricky; Salvail, Pat; Harper, Roger

    2004-01-01

    Space fission technology has the potential to enable rapid access to any point in the solar system. If fission propulsion systems are to be developed to their full potential, however, near-term customers need to be identified and initial fission systems successfully developed, launched, and utilized. One key to successful utilization is to develop reactor designs that are highly testable. Testable reactor designs have a much higher probability of being successfully converted from paper concepts to working space hardware than do designs which are difficult or impossible to realistically test. ''Test Effectiveness'' is one measure of the ability to realistically test a space reactor system. The objective of this paper is to discuss test effectiveness as applied to the design, development, flight qualification, and acceptance testing of space fission systems. The ability to perform highly effective testing would be particularly important to the success of any near-term mission, such as NASA's Jupiter Icy Moons Orbiter, the first mission under study within NASA's Project Prometheus, the Nuclear Systems Program

  1. The Future of Astrometry in Space

    Directory of Open Access Journals (Sweden)

    Antonella Vallenari

    2018-04-01

    Full Text Available This contribution focuses on the importance of astrometry and on its future developments. Over the centuries astrometry has greatly contributed to the advance of the knowledge of the Universe. Nowadays a major breakthrough is on the way due to astrometric sky surveys from space. ESA space missions Hipparcos first and then Gaia point out the outstanding contribution that space astrometry can provide to our knowledge in many fields of astrophysics, going from the Milky Way formation and evolution, to stellar astrophysics, extra-galactic astrophysics, and fundamental physics. We briefly outline the properties of Gaia first and second data release, and the accuracies expected end-of-mission. The next big advance in space astrometry would be either to improve the astrometric accuracy of one order of magnitude, or to move to a different wavelength domain. While both options have the potential to bring us in a new era of discovery, they have to face enormous issues. We summarize the future directions in space astrometry that are proposed or under investigation by the scientific community, their main challenges and the expected outcome.

  2. Friction stir processing on high carbon steel U12

    Energy Technology Data Exchange (ETDEWEB)

    Tarasov, S. Yu., E-mail: tsy@ispms.ru; Rubtsov, V. E., E-mail: rvy@ispms.ru [Institute of Strength Physics and Materials Science SB RAS, Tomsk, 634055 (Russian Federation); National Research Tomsk Polytechnic University, Tomsk, 634050 (Russian Federation); Melnikov, A. G., E-mail: melnikov-ag@tpu.ru [National Research Tomsk Polytechnic University, Tomsk, 634050 (Russian Federation)

    2015-10-27

    Friction stir processing (FSP) of high carbon steel (U12) samples has been carried out using a milling machine and tools made of cemented tungsten carbide. The FSP tool has been made in the shape of 5×5×1.5 mm. The microstructural characterization of obtained stir zone and heat affected zone has been carried out. Microhardness at the level of 700 MPa has been obtained in the stir zone with microstructure consisting of large grains and cementitte network. This high-level of microhardness is explained by bainitic reaction developing from decarburization of austenitic grains during cementite network formation.

  3. Failure rate data for fusion safety and risk assessment

    International Nuclear Information System (INIS)

    Cadwallader, L.C.

    1993-01-01

    The Fusion Safety Program (FSP) at the Idaho National Engineering Laboratory (INEL) conducts safety research in materials, chemical reactions, safety analysis, risk assessment, and in component research and development to support existing magnetic fusion experiments and also to promote safety in the design of future experiments. One of the areas of safety research is applying probabilistic risk assessment (PRA) methods to fusion experiments. To apply PRA, we need a fusion-relevant radiological dose code and a component failure rate data base. This paper describes the FSP effort to develop a failure rate data base for fusion-specific components

  4. ON STRONG AND WEAK CONVERGENCE IN n-HILBERT SPACES

    Directory of Open Access Journals (Sweden)

    Agus L. Soenjaya

    2014-03-01

    Full Text Available We discuss the concepts of strong and weak convergence in n-Hilbert spaces and study their properties. Some examples are given to illustrate the concepts. In particular, we prove an analogue of Banach-Saks-Mazur theorem and Radon-Riesz property in the case of n-Hilbert space.

  5. Full-wave modeling of ICRF waves: global and quasi-local descriptions

    International Nuclear Information System (INIS)

    Dumont, R. J.

    2007-01-01

    Waves in the Ion Cyclotron Range of Frequencies (ICRF) undergo significant space dispersion as they propagate in magnetic fusion plasmas, making it necessary to incorporate non-local effects in their physical description. Full-wave codes are routinely employed to simulate ICRF heating experiments in tokamaks. The vast majority of these codes rely on a description of the plasma based on a 'quasi-local' derivation of the dielectric tensor, i.e. assuming that the range of space dispersion remains small compared to the system dimensions. However, non-local effects caused by wide particle orbits are expected to play a significant role in current and future experiments featuring wave-driven fast ions, fusion-born alpha particles... Global formalisms have thus been proposed to include these effects in a more comprehensive fashion. Based on a description of the particle dynamics in terms of action-angle variables, a full-wave code, named EVE, is currently under development. Its first version, presented here, incorporates quasi-local expressions valid to second order in Larmor radius, derived from the more general Hamiltonian formalism. The obtained tool has the advantage of being compatible with the current requirements of integrated modeling, and lends itself to direct comparisons with existing codes

  6. Tubing cutter for tight spaces

    Science.gov (United States)

    Girala, A. S.

    1980-01-01

    Cutter requires few short swings of handle to rotate its cutting edge full 360 around tube. It will cut tubing installed in confined space that prevents free movement of conventional cutter. Cutter is snapped onto tube and held in place by spring-loaded clamp. Screw ratchet advances cutting wheel.

  7. Space Station Freedom - Approaching the critical design phase

    Science.gov (United States)

    Kohrs, Richard H.; Huckins, Earle, III

    1992-01-01

    The status and future developments of the Space Station Freedom are discussed. To date detailed design drawings are being produced to manufacture SSF hardware. A critical design review (CDR) for the man-tended capability configuration is planned to be performed in 1993 under the SSF program. The main objective of the CDR is to enable the program to make a full commitment to proceed to manufacture parts and assemblies. NASA recently signed a contract with the Russian space company, NPO Energia, to evaluate potential applications of various Russian space hardware for on-going NASA programs.

  8. Full text clustering and relationship network analysis of biomedical publications.

    Directory of Open Access Journals (Sweden)

    Renchu Guan

    Full Text Available Rapid developments in the biomedical sciences have increased the demand for automatic clustering of biomedical publications. In contrast to current approaches to text clustering, which focus exclusively on the contents of abstracts, a novel method is proposed for clustering and analysis of complete biomedical article texts. To reduce dimensionality, Cosine Coefficient is used on a sub-space of only two vectors, instead of computing the Euclidean distance within the space of all vectors. Then a strategy and algorithm is introduced for Semi-supervised Affinity Propagation (SSAP to improve analysis efficiency, using biomedical journal names as an evaluation background. Experimental results show that by avoiding high-dimensional sparse matrix computations, SSAP outperforms conventional k-means methods and improves upon the standard Affinity Propagation algorithm. In constructing a directed relationship network and distribution matrix for the clustering results, it can be noted that overlaps in scope and interests among BioMed publications can be easily identified, providing a valuable analytical tool for editors, authors and readers.

  9. Pleomorphic Adenomas of the Parapharyngeal Space

    Directory of Open Access Journals (Sweden)

    İstemihan Akın

    2014-01-01

    Full Text Available Background. Parapharyngeal space is one of potential facial planes for neoplasms and infections and represents less than 1% of all head and neck tumours. Occurrence of the pleomorphic adenoma in the parapharyngeal space is a rarity. Case Presentation. Here, three giant pleomorphic adenomas of different sizes occupying the parapharyngeal space in three patients are reported. Extensive preoperative diagnostic workup was done in order to verify the nature and size of the tumour and the proximity to the large vessels. Review of the literature, clinical features, pathology, radiological findings, and treatment of these tumours are discussed. Conclusion. The excision of the tumor through submandibular transcervical approach, without cutting the mandible, turned out to be a safe and radical approach in all three cases.

  10. Bundles over Quantum RealWeighted Projective Spaces

    Directory of Open Access Journals (Sweden)

    Tomasz Brzeziński

    2012-09-01

    Full Text Available The algebraic approach to bundles in non-commutative geometry and the definition of quantum real weighted projective spaces are reviewed. Principal U(1-bundles over quantum real weighted projective spaces are constructed. As the spaces in question fall into two separate classes, the negative or odd class that generalises quantum real projective planes and the positive or even class that generalises the quantum disc, so do the constructed principal bundles. In the negative case the principal bundle is proven to be non-trivial and associated projective modules are described. In the positive case the principal bundles turn out to be trivial, and so all the associated modules are free. It is also shown that the circle (coactions on the quantum Seifert manifold that define quantum real weighted projective spaces are almost free.

  11. Urban public space materials. Maintenance and design?

    Directory of Open Access Journals (Sweden)

    Manuel Iglesias Campos

    2016-10-01

    Full Text Available In this paper, certain aspects related to the conservation of materials commonly used in the design of public spaces are analysed and discussed from a starting point of maintenance definition. The main area of discussion is whether materials selection for pavements and urban furniture, and their placement in the designed space, take into account their maintenance needs. Here the definition of maintenance is the cleaning and repair done by municipal services that is always necessary after construction. From certain examples it can be concluded that, in several cases, the form, the organization and the distribution of the different elements within the public space can cause difficulties for its appropriate conservation, giving rise to alterations and consequently having a negative impact on the durability of this space.

  12. Function spaces with uniform, fine and graph topologies

    CERN Document Server

    McCoy, Robert A; Jindal, Varun

    2018-01-01

    This book presents a comprehensive account of the theory of spaces of continuous functions under uniform, fine and graph topologies. Besides giving full details of known results, an attempt is made to give generalizations wherever possible, enriching the existing literature. The goal of this monograph is to provide an extensive study of the uniform, fine and graph topologies on the space C(X,Y) of all continuous functions from a Tychonoff space X to a metric space (Y,d); and the uniform and fine topologies on the space H(X) of all self-homeomorphisms on a metric space (X,d). The subject matter of this monograph is significant from the theoretical viewpoint, but also has applications in areas such as analysis, approximation theory and differential topology. Written in an accessible style, this book will be of interest to researchers as well as graduate students in this vibrant research area.

  13. Space Identity: Th e Case of Vyborg

    Directory of Open Access Journals (Sweden)

    V. P. Bakhchivanzhi

    2014-01-01

    Full Text Available Among the unique meanings and images which form the Vyborg space by the citizens one can distinguish at least the images — an European town, a multicultural town and a town with the special exclusiveness, moreover so, they coexist successfully. In other words, although local identity prevails in Vyborg, its space is unique because there are several types of identity. Over the recent decades the space has been re-interpreted: defense functions of the town (or solely of the fortress town have evolved into connecting, contact, which is demonstrated by the fact that Vyborg represents a borderzone between cultures, traditions and values.

  14. Finite Word-Length Effects in Digital State-Space Filters

    Directory of Open Access Journals (Sweden)

    B. Psenicka

    1999-12-01

    Full Text Available The state-space description of digital filters involves except the relationship between input and output signals an additional set of state variables. The state-space structures of digital filters have many positive properties compared with direct canonical structures. The main advantage of digital filter structures developed using state-space technique is a smaller sensitivity to quantization effects by fixed-point implementation. In our presentation, the emphasis is on the analysis of coefficient quantization and on existence of zero-input limit cycles in state-space digital filters. The comparison with direct form II structure is presented.

  15. Space Archaeology: Attribute, Object, Task and Method

    Science.gov (United States)

    Wang, Xinyuan; Guo, Huadong; Luo, Lei; Liu, Chuansheng

    2017-04-01

    Archaeology takes the material remains of human activity as the research object, and uses those fragmentary remains to reconstruct the humanistic and natural environment in different historical periods. Space Archaeology is a new branch of the Archaeology. Its study object is the humanistic-natural complex including the remains of human activities and living environments on the earth surface. The research method, space information technologies applied to this complex, is an innovative process concerning archaeological information acquisition, interpretation and reconstruction, and to achieve the 3-D dynamic reconstruction of cultural heritages by constructing the digital cultural-heritage sphere. Space archaeology's attribute is highly interdisciplinary linking several areas of natural and social and humanities. Its task is to reveal the history, characteristics, and patterns of human activities in the past, as well as to understand the evolutionary processes guiding the relationship between human and their environment. This paper summarizes six important aspects of space archaeology and five crucial recommendations for the establishment and development of this new discipline. The six important aspects are: (1) technologies and methods for non-destructive detection of archaeological sites; (2) space technologies for the protection and monitoring of cultural heritages; (3) digital environmental reconstruction of archaeological sites; (4) spatial data storage and data mining of cultural heritages; (5) virtual archaeology, digital reproduction and public information and presentation system; and (6) the construction of scientific platform of digital cultural-heritage sphere. The five key recommendations for establishing the discipline of Space Archaeology are: (1) encouraging the full integration of the strengths of both archaeology and museology with space technology to promote the development of space technologies' application for cultural heritages; (2) a new

  16. download full text

    African Journals Online (AJOL)

    Njeri

    He took his children to St Marys, I could not afford to do so. ... place in universities should have been an important learning space for students. ... just us we are fascinated by Manchester football clubs and western movies as well as music.

  17. Some New Lacunary Strong Convergent Vector-Valued Sequence Spaces

    Directory of Open Access Journals (Sweden)

    M. Mursaleen

    2014-01-01

    Full Text Available We introduce some vector-valued sequence spaces defined by a Musielak-Orlicz function and the concepts of lacunary convergence and strong (A-convergence, where A=(aik is an infinite matrix of complex numbers. We also make an effort to study some topological properties and some inclusion relations between these spaces.

  18. On nonlinear stability in various random normed spaces

    Directory of Open Access Journals (Sweden)

    Saadati Reza

    2011-01-01

    Full Text Available Abstract In this article, we prove the nonlinear stability of the quartic functional equation 1 6 f ( x + 4 y + f ( 4 x - y = 3 0 6 9 f x + y 3 + f ( x + 2 y (1 + 1 3 6 f ( x - y - 1 3 9 4 f ( x + y + 4 2 5 f ( y - 1 5 3 0 f ( x (2 (3  in the setting of random normed spaces Furthermore, the interdisciplinary relation among the theory of random spaces, the theory of non-Archimedean space, the theory of fixed point theory, the theory of intuitionistic spaces and the theory of functional equations are also presented in the article.

  19. Quantum stochastic calculus in Fock space: A review

    International Nuclear Information System (INIS)

    Hudson, R.L.

    1986-01-01

    This paper presents a survey of the recently developed theory of quantum stochastic calculus in Boson Fock space, together with its applications. The work focuses on a non-commutative generalization of the classical Ito stochastic calculus of Brownian motion, which exploits to the full the Wiener-Segal duality transformation identifying the L 2 space of Wiener measure with a Boson Fock space. This Fock space emerges as the natural home of not only Brownian motion but also classical Poisson processes, and even of Fermionic processes of the type developed by Barnett et al. The principle physical application of the theory to the construction and characterization of unitary dilations of quantum dynamical semigroups is also described

  20. The development of a cislunar space infrastructure

    Science.gov (United States)

    Buck, C. A.; Johnson, A. S.; Mcglinchey, J. M.; Ryan, K. D.

    1989-01-01

    The primary objective of this Advanced Mission Design Program is to define the general characteristics and phased evolution of a near-Earth space infrastructure. The envisioned foundation includes a permanently manned, self-sustaining base on the lunar surface, a space station at the Libration Point between earth and the moon (L1), and a transportation system that anchors these elements to the Low Earth Orbit (LEO) station. The implementation of this conceptual design was carried out with the idea that the infrastructure is an important step in a larger plan to expand man's capabilities in space science and technology. Such expansion depends on low cost, reliable, and frequent access to space for those who wish to use the multiple benefits of this environment. The presence of a cislunar space infrastructure would greatly facilitate the staging of future planetary missions, as well as the full exploration of the lunar potential for science and industry. The rationale for, and a proposed detailed scenario in support of, the cislunar space infrastructure are discussed.

  1. GENDERED SPACE IN WEST SUMBA TRADITIONAL HOUSES

    Directory of Open Access Journals (Sweden)

    Esti Asih NURDIAH

    2015-12-01

    Full Text Available Rendell stated that gender representation underlined the production of space in architecture both symbolically and functionally in certain cultures (Rendell et al. 2000. Thus, an exploration on the spatial functionality of traditional houses could show how cultural gender rules and roles generate the spatial arrangements. This empirical research explored the traditional houses in two kampongs: Tarung and Ratenggaro of West Sumba, Indonesia, which spaces are divided into two distinct spaces: male’s space and female’s space, each with its own entrance. This firm division leads to the questions on its relation with the traditional gender roles are represented inside the house. Interestingly, the spatial arrangement is not intended to create separation between men and women inside the house or to pose that the status and roles of men are higher than those of women. The research found that the space separation actually is a manifestation of the dynamic roles of male and female members of the house and the circular arrangement of the space around the fireplace at the centre of the house follows the dynamic of gender duality in Sumba culture.

  2. National Space Agencies vs. Commercial Space: Towards Improved Space Safety

    Science.gov (United States)

    Pelton, J.

    2013-09-01

    Traditional space policies as developed at the national level includes many elements but they are most typically driven by economic and political objectives. Legislatively administered programs apportion limited public funds to achieve "gains" that can involve employment, stimulus to the economy, national defense or other advancements. Yet political advantage is seldom far from the picture.Within the context of traditional space policies, safety issues cannot truly be described as "afterthoughts", but they are usually, at best, a secondary or even tertiary consideration. "Space safety" is often simply assumed to be "in there" somewhere. The current key question is can "safety and risk minimization", within new commercial space programs actually be elevated in importance and effectively be "designed in" at the outset. This has long been the case with commercial aviation and there is at least reasonable hope that this could also be the case for the commercial space industry in coming years. The cooperative role that the insurance industry has now played for centuries in the shipping industry and for decades in aviation can perhaps now play a constructive role in risk minimization in the commercial space domain as well. This paper begins by examining two historical case studies in the context of traditional national space policy development to see how major space policy decisions involving "manned space programs" have given undue primacy to "political considerations" over "safety" and other factors. The specific case histories examined here include first the decision to undertake the Space Shuttle Program (i.e. 1970-1972) and the second is the International Space Station. In both cases the key and overarching decisions were driven by political, schedule and cost considerations, and safety seems absence as a prime consideration. In publicly funded space programs—whether in the United States, Europe, Russia, Japan, China, India or elsewhere—it seems realistic to

  3. Curved twistor spaces and H-space

    International Nuclear Information System (INIS)

    Tod, K.P.

    1980-01-01

    The curved twistor space construction of Penrose for anti-self-dual solutions to the Einstein vacuum equations is described. Curved twistor spaces are defined and it is shown with the aid of an example how to obtain them by deforming the complex structure of regions of flat twistor space. The connection of this procedure with Newman's H-space construction via asymptotic twistor space is outlined. (Auth.)

  4. Sensorial Organization as an Ethics of Space: Digital Media in Everyday Life

    Directory of Open Access Journals (Sweden)

    Stina Bengtsson

    2018-05-01

    Full Text Available This article outlines an analysis of the ethical organization of digital media and social and individual space in everyday life. This is made from a perspective of an ‘ethics of the ordinary’, highlighting the mundane negotiations and practices conducted to maintain a ‘good life’ with the media. The analysis shows a sensorial organization of space is conducted in relation to social space, as well as individually. The interviewees use facilities provided by media technologies in order to organize space, as well as organize their media devices spatially in order to construct space for specific purposes, and maintain a good life. These results call for a deepened analysis of the sensorial dimensions of everyday space, in order to understand the ethical struggles of a life with digital media. It is important to include the full spectrum of sensorial experiences in our approach to everyday life and to take the sensorial experiences of ordinary media users into account in our analysis of space as part of an everyday ethics.

  5. Large size space construction for space exploitation

    Science.gov (United States)

    Kondyurin, Alexey

    2016-07-01

    Space exploitation is impossible without large space structures. We need to make sufficient large volume of pressurized protecting frames for crew, passengers, space processing equipment, & etc. We have to be unlimited in space. Now the size and mass of space constructions are limited by possibility of a launch vehicle. It limits our future in exploitation of space by humans and in development of space industry. Large-size space construction can be made with using of the curing technology of the fibers-filled composites and a reactionable matrix applied directly in free space. For curing the fabric impregnated with a liquid matrix (prepreg) is prepared in terrestrial conditions and shipped in a container to orbit. In due time the prepreg is unfolded by inflating. After polymerization reaction, the durable construction can be fitted out with air, apparatus and life support systems. Our experimental studies of the curing processes in the simulated free space environment showed that the curing of composite in free space is possible. The large-size space construction can be developed. A project of space station, Moon base, Mars base, mining station, interplanet space ship, telecommunication station, space observatory, space factory, antenna dish, radiation shield, solar sail is proposed and overviewed. The study was supported by Humboldt Foundation, ESA (contract 17083/03/NL/SFe), NASA program of the stratospheric balloons and RFBR grants (05-08-18277, 12-08-00970 and 14-08-96011).

  6. Decadal opportunities for space architects

    Science.gov (United States)

    Sherwood, Brent

    2012-12-01

    A significant challenge for the new field of space architecture is the dearth of project opportunities. Yet every year more young professionals express interest to enter the field. This paper derives projections that bound the number, type, and range of global development opportunities that may be reasonably expected over the next few decades for human space flight (HSF) systems so those interested in the field can benchmark their goals. Four categories of HSF activity are described: human Exploration of solar system bodies; human Servicing of space-based assets; large-scale development of space Resources; and Breakout of self-sustaining human societies into the solar system. A progressive sequence of capabilities for each category starts with its earliest feasible missions and leads toward its full expression. The four sequences are compared in scale, distance from Earth, and readiness. Scenarios hybridize the most synergistic features from the four sequences for comparison to status quo, government-funded HSF program plans. Finally qualitative, decadal, order-of-magnitude estimates are derived for system development needs, and hence opportunities for space architects. Government investment towards human planetary exploration is the weakest generator of space architecture work. Conversely, the strongest generator is a combination of three market drivers: (1) commercial passenger travel in low Earth orbit; (2) in parallel, government extension of HSF capability to GEO; both followed by (3) scale-up demonstration of end-to-end solar power satellites in GEO. The rich end of this scale affords space architecture opportunities which are more diverse, complex, large-scale, and sociologically challenging than traditional exploration vehicle cabins and habitats.

  7. The effect of stocking density and bin feeder space on performance ...

    African Journals Online (AJOL)

    The effect of stocking density and bin feeder space on performance in pigs. G.A. Lavers, N.S. Ferguson. Abstract. (South African J of Animal Science, 2000, 30, Supplement 1: 70-71). Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT.

  8. Millimeterwave Space Power Grid architecture development 2012

    Science.gov (United States)

    Komerath, Narayanan; Dessanti, Brendan; Shah, Shaan

    This is an update of the Space Power Grid architecture for space-based solar power with an improved design of the collector/converter link, the primary heater and the radiator of the active thermal control system. The Space Power Grid offers an evolutionary approach towards TeraWatt-level Space-based solar power. The use of millimeter wave frequencies (around 220GHz) and Low-Mid Earth Orbits shrinks the size of the space and ground infrastructure to manageable levels. In prior work we showed that using Brayton cycle conversion of solar power allows large economies of scale compared to the linear mass-power relationship of photovoltaic conversion. With high-temperature materials permitting 3600 K temperature in the primary heater, over 80 percent cycle efficiency was shown with a closed helium cycle for the 1GW converter satellite which formed the core element of the architecture. Work done since the last IEEE conference has shown that the use of waveguides incorporated into lighter-than-air antenna platforms, can overcome the difficulties in transmitting millimeter wave power through the moist, dense lower atmosphere. A graphene-based radiator design conservatively meets the mass budget for the waste heat rejection system needed for the compressor inlet temperature. Placing the ultralight Mirasol collectors in lower orbits overcomes the solar beam spot size problem of high-orbit collection. The architecture begins by establishing a power exchange with terrestrial renewable energy plants, creating an early revenue generation approach with low investment. The approach allows for technology development and demonstration of high power millimeter wave technology. A multinational experiment using the International Space Station and another power exchange satellite is proposed to gather required data and experience, thus reducing the technical and policy risks. The full-scale architecture deploys pairs of Mirasol sunlight collectors and Girasol 1 GW converter satellites t

  9. Arthroscopic anatomy of the subdeltoid space

    Directory of Open Access Journals (Sweden)

    Michael J. Salata

    2013-09-01

    Full Text Available From the first shoulder arthroscopy performed on a cadaver in 1931, shoulder arthroscopy has grown tremendously in its ability to diagnose and treat pathologic conditions about the shoulder. Despite improvements in arthroscopic techniques and instrumentation, it is only recently that arthroscopists have begun to explore precise anatomical structures within the subdeltoid space. By way of a thorough bursectomy of the subdeltoid region, meticulous hemostasis, and the reciprocal use of posterior and lateral viewing portals, one can identify a myriad of pertinent ligamentous, musculotendinous, osseous, and neurovascular structures. For the purposes of this review, the subdeltoid space has been compartmentalized into lateral, medial, anterior, and posterior regions. Being able to identify pertinent structures in the subdeltoid space will provide shoulder arthroscopists with the requisite foundation in core anatomy that will be required for challenging procedures such as arthroscopic subscapularis mobilization and repair, biceps tenodesis, subcoracoid decompression, suprascapular nerve decompression, quadrangular space decompression and repair of massive rotator cuff tears.

  10. Spacelike Hypersurfaces in Weighted Generalized Robertson-Walker Space-Times

    Directory of Open Access Journals (Sweden)

    Ximin Liu

    2018-01-01

    Full Text Available Applying generalized maximum principle and weak maximum principle, we obtain several uniqueness results for spacelike hypersurfaces immersed in a weighted generalized Robertson-Walker (GRW space-time under suitable geometric assumptions. Furthermore, we also study the special case when the ambient space is static and provide some results by using Bochner’s formula.

  11. On paranormed Zweier ideal convergent sequence spaces defined By Orlicz function

    Directory of Open Access Journals (Sweden)

    Bipan Hazarika

    2014-10-01

    Full Text Available In this article we introduce paranorm ideal convergent sequence spaces using Zweier transform and Orlicz function. We study some topological and algebraic properties. Further we prove some inclusion relations related to these new spaces.

  12. SpaceTech—Postgraduate space education

    Science.gov (United States)

    de Bruijn, Ferdi J.; Ashford, Edward W.; Larson, Wiley J.

    2008-07-01

    SpaceTech is a postgraduate program geared primarily for mid-career space professionals seeking to gain or improve their expertise in space systems engineering and in business engineering. SpaceTech provides a lifelong impact on its participants by broadening their capabilities, encouraging systematic "end-to-end" thinking and preparing them for any technical or business-related engineering challenges they may encounter. This flexible 1-year program offers high competency gain and increased business skills. It is held in attractive locations in a flexible, multi-cultural environment. SpaceTech is a highly effective master's program certified by the esteemed Technical University of Delft (TUD), Netherlands. SpaceTech provides expert instructors who place no barriers between themselves and participants. The program combines innovative and flexible new approaches with time-tested methods to give participants the skills required for future missions and new business, while allowing participants to meet their work commitments at the same time as they study for their master's degree. The SpaceTech program is conducted in separate sessions, generally each of 2-week duration, separated by periods of some 6-8 weeks, during which time participants may return to their normal jobs. It also includes introductory online course material that the participants can study at their leisure. The first session is held at the TUD, with subsequent sessions held at strategic space agency locations. By participating at two or more of these sessions, attendees can earn certificates of satisfactory completion from TU Delft. By participating in all of the sessions, as well as taking part in the companion Central Case Project (CCP), participants earn an accredited and highly respected master's degree in Space Systems Engineering from the TUD. Seven distinct SpaceTech modules are provided during these sessions: Space Mission Analysis and Design, Systems Engineering, Business Engineering

  13. ADAPTIVE FULL-SPECTRUM SOLOR ENERGY SYSTEMS

    Energy Technology Data Exchange (ETDEWEB)

    Byard D. Wood

    2004-04-01

    This RD&D project is a three year team effort to develop a hybrid solar lighting (HSL) system that transports solar light from a paraboloidal dish concentrator to a luminaire via a large core polymer fiber optic. The luminaire can be a device to distribute sunlight into a space for the production of algae or it can be a device that is a combination of solar lighting and electric lighting. A benchmark prototype system has been developed to evaluate the HSL system. Sunlight is collected using a one-meter paraboloidal concentrator dish with two-axis tracking. A secondary mirror consisting of eight planar-segmented mirrors directs the visible part of the spectrum to eight fibers (receiver) and subsequently to eight luminaires. This results in about 8,200 lumens incident at each fiber tip. Each fiber can illuminate about 16.7 m{sup 2} (180 ft{sup 2}) of office space. The IR spectrum is directed to a thermophotovoltaic (TPV) array to produce electricity. During this reporting period, the project team made advancements in the design of the second generation (Alpha) system. For the Alpha system, the eight individual 12 mm fibers have been replaced with a centralized bundle of 3 mm fibers. The TRNSYS Full-Spectrum Solar Energy System model has been updated and new components have been added. The TPV array and nonimaging device have been tested and progress has been made in the fiber transmission models. A test plan was developed for both the high-lumen tests and the study to determine the non-energy benefits of daylighting. The photobioreactor team also made major advancements in the testing of model scale and bench top lab-scale systems.

  14. Conflict, Space and Architecture

    Directory of Open Access Journals (Sweden)

    Marc Schoonderbeek

    2017-02-01

    Full Text Available Footprint 19 focuses on the more recent roles of architecture in the contemporary spaces of conflict. Departing from a spatial understanding of geopolitical, climatological and economical conflicts, the various contributions highlight the large scale and phenomenal transitions in the physical world and in society by extrapolating, through examples, the abundance of relations that can be traced between conflict, territory and architecture. Conflict areas often prove to be fertile grounds for innovation and for the emergence of new spatial forms. The issue reports on the state of perpetual global unrest in architecture through a series of articles and case studies that highlight the consequences of conflicts in the places and spaces that we inhabit. In the introduction, these are discussed as an interlinked global reality rather than as isolated incidents. In doing so, the contemporary spaces of conflict are positioned in the context of emerging global trends, conditions, and discourses in the attempt to address their indicative symptoms while reflecting on their underlying causes.

  15. The Heliosphere in Space

    Science.gov (United States)

    Frisch, P. C.; Hanson, A. J.; Fu, P. C.

    2008-12-01

    A scientifically accurate visualization of the Journey of the Sun through deep space has been created in order to share the excitement of heliospheric physics and scientific discovery with the non-expert. The MHD heliosphere model of Linde (1998) displays the interaction of the solar wind with the interstellar medium for a supersonic heliosphere traveling through a low density magnetized interstellar medium. The camera viewpoint follows the solar motion through a virtual space of the Milky Way Galaxy. This space is constructed from real data placed in the three-dimensional solar neighborhood, and populated with Hipparcos stars in front of a precisely aligned image of the Milky Way itself. The celestial audio track of this three minute movie includes the music of the heliosphere, heard by the two Voyager satellites as 3 kHz emissions from the edge of the heliosphere. This short heliosphere visualization can be downloaded from http://www.cs.indiana.edu/~soljourn/pub/AstroBioScene7Sound.mov, and the full scientific data visualization of the Solar Journey is available commercially.

  16. The US space station: Potential base for a spaceborne microwave facility

    Science.gov (United States)

    Mcconnell, D.

    1983-01-01

    Concepts for a U.S. space station were studied to achieve the full potential of the Space Shuttle and to provide a more permanent presence in space. The space station study is summarized in the following questions: Given a space station in orbit in the 1990's, how should it best be used to achieve science and applications objectives important at that time? To achieve those objectives, of what elements should the station be comprised and how should the elements be configured and equipped. These questions are addressed.

  17. Significance of MRI Perivascular Spaces in MS

    Directory of Open Access Journals (Sweden)

    J Gordon Millichap

    2008-10-01

    Full Text Available The role of perivascular Virchow-Robin spaces was investigated in 45 multiple sclerosis (MS patients and 30 healthy controls, in a study at Charite-Universitaetsmedizin Berlin, and Goethe University, Frankfurt.

  18. Boundedness of the Segal-Bargmann Transform on Fractional Hermite-Sobolev Spaces

    Directory of Open Access Journals (Sweden)

    Hong Rae Cho

    2017-01-01

    Full Text Available Let s∈R and 2≤p≤∞. We prove that the Segal-Bargmann transform B is a bounded operator from fractional Hermite-Sobolev spaces WHs,pRn to fractional Fock-Sobolev spaces FRs,p.

  19. Putting Continuous Metaheuristics to Work in Binary Search Spaces

    Directory of Open Access Journals (Sweden)

    Broderick Crawford

    2017-01-01

    Full Text Available In the real world, there are a number of optimization problems whose search space is restricted to take binary values; however, there are many continuous metaheuristics with good results in continuous search spaces. These algorithms must be adapted to solve binary problems. This paper surveys articles focused on the binarization of metaheuristics designed for continuous optimization.

  20. Some double sequence spaces of interval numbers defined by Orlicz function

    Directory of Open Access Journals (Sweden)

    Ayhan Esi

    2014-10-01

    Full Text Available In this paper we introduce some interval valued double sequence spaces defined by Orlicz function and study different properties of these spaces like inclusion relations, solidity, etc. We establish some inclusion relations among them. Also we introduce the concept of double statistical convergence for interval number sequences and give an inclusion relation between interval valued double sequence spaces.