WorldWideScience

Sample records for freight container lifting

  1. FREIGHT CONTAINER LIFTING STANDARD

    POWERS DJ; SCOTT MA; MACKEY TC

    2010-01-13

    This standard details the correct methods of lifting and handling Series 1 freight containers following ISO-3874 and ISO-1496. The changes within RPP-40736 will allow better reading comprehension, as well as correcting editorial errors.

  2. Container crane for sea freight containers

    Luttekes, E.; Rijsenbrij, J.C.

    2001-01-01

    The invention relates to a container crane for loading and unloading seaborne containers. The container crane comprises a bridge girder (7), a jib (8), at least two crabs (11, 12) which can travel along the said bridge girder and/or jib and are provided with hoist means for lifting and lowering the

  3. Purging of working atmospheres inside freight containers.

    Braconnier, Robert; Keller, François-Xavier

    2015-06-01

    This article focuses on prevention of possible exposure to chemical agents, when opening, entering, and stripping freight containers. The container purging process is investigated using tracer gas measurements and numerical airflow simulations. Three different container ventilation conditions are studied, namely natural, mixed mode, and forced ventilation. The tests conducted allow purging time variations to be quantified in relation to various factors such as container size, degree of filling, or type of load. Natural ventilation performance characteristics prove to be highly variable, depending on environmental conditions. Use of a mechanically supplied or extracted airflow under mixed mode and forced ventilation conditions enables purging to be significantly accelerated. Under mixed mode ventilation, extracting air from the end of the container furthest from the door ensures quicker purging than supplying fresh air to this area. Under forced ventilation, purging rate is proportional to the applied ventilation flow. Moreover, purging rate depends mainly on the location at which air is introduced: the most favourable position being above the container loading level. Many of the results obtained during this study can be generalized to other cases of purging air in a confined space by general ventilation, e.g. the significance of air inlet positioning or the advantage of generating high air velocities to maximize stirring within the volume. © The Author 2015. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

  4. The development of ISO freight containers as IP-2 packagings

    Janicki, M.C.; Vaughan, R.A.

    1993-01-01

    Design specifications were developed for ISO freight containers to meet the requirements of the transport regulations in the 1985 Edition of IAEA SS6, and to maximize the technical and commercial benefits offered to consignors by this type of container for the transport and handling of bulk LSA/SCO materials. A range of IP-2 ISO freight containers have been designed and built to these specifications and are in use in the UK. This paper discusses the regulatory considerations which had to be reviewed and interpreted in developing freight containers as Industrial Package Type 2 (IP-2) packagings and the development of performance standards to meet the regulatory requirements. Outline details of the packages developed are indicated together with examples of handling equipment developed to facilitate loading and unloading. (J.P.N.)

  5. 49 CFR 173.9 - Transport vehicles or freight containers containing lading which has been fumigated.

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Transport vehicles or freight containers... MATERIALS REGULATIONS SHIPPERS-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS General § 173.9 Transport... hazardous material. (b) No person may offer for transportation or transport a rail car, freight container...

  6. Recent progress in 3-D imaging of sea freight containers

    Fuchs, Theobald; Schön, Tobias; Sukowski, Frank; Dittmann, Jonas; Hanke, Randolf

    2015-01-01

    The inspection of very large objects like sea freight containers with X-ray Computed Tomography (CT) is an emerging technology. A complete 3-D CT scan of a see-freight container takes several hours. Of course, this is too slow to apply it to a large number of containers. However, the benefits of a 3-D CT for sealed freight are obvious: detection of potential threats or illicit cargo without being confronted with legal complications or high time consumption and risks for the security personnel during a manual inspection. Recently distinct progress was made in the field of reconstruction of projections with only a relatively low number of angular positions. Instead of today’s 500 to 1000 rotational steps, as needed for conventional CT reconstruction techniques, this new class of algorithms provides the potential to reduce the number of projection angles approximately by a factor of 10. The main drawback of these advanced iterative methods is the high consumption for numerical processing. But as computational power is getting steadily cheaper, there will be practical applications of these complex algorithms in a foreseeable future. In this paper, we discuss the properties of iterative image reconstruction algorithms and show results of their application to CT of extremely large objects scanning a sea-freight container. A specific test specimen is used to quantitatively evaluate the image quality in terms of spatial and contrast resolution and depending on different number of projections

  7. Modelling global container freight transport demand

    Tavasszy, L.A.; Ivanova, O.; Halim, R.A.

    2015-01-01

    The objective of this chapter is to discuss methods and techniques for a quantitative and descriptive analysis of future container transport demand at a global level. Information on future container transport flows is useful for various purposes. It is instrumental for the assessment of returns of

  8. Designing container shipping network under changing demand and freight rates

    C. Chen

    2010-03-01

    Full Text Available This paper focuses on the optimization of container shipping network and its operations under changing cargo demand and freight rates. The problem is formulated as a mixed integer non-linear programming problem (MINP with an objective of maximizing the average unit ship-slot profit at three stages using analytical methodology. The issues such as empty container repositioning, ship-slot allocating, ship sizing, and container configuration are simultaneously considered based on a series of the matrices of demand for a year. To solve the model, a bi-level genetic algorithm based method is proposed. Finally, numerical experiments are provided to illustrate the validity of the proposed model and algorithms. The obtained results show that the suggested model can provide a more realistic solution to the issues on the basis of changing demand and freight rates and arrange a more effective approach to the optimization of container shipping network structures and operations than does the model based on the average demand.

  9. DETERMINATION THE PERMISSIBLE FORCES IN ASSESSING THE LIFT RESISTANT FACTOR OF FREIGHT CARS IN TRAINS

    A. O. Shvets

    2016-02-01

    Full Text Available Purpose. In the analytical research are considered: 1 relationships between the longitudinal force acting on the car in the train; 2 lateral and vertical forces of interaction in the contact zone «wheel – rail»; 3 dynamic indicators of cars with the magnitude of the car lift resistance factor; 4 obtaining of the dependencies between them. Methodology. The study was conducted by an analytical method assessing the sustainability of the freight car when driving at different speeds on the straight and curved track sections. Findings. In the process of studying the motion of the train, in the investigation of transport events, as well as during the training on the simulator operator, to assess the actions of the driver, the values of the longitudinal forces in the inter car connections are used. To calculate the longitudinal compressive forces, acting on the car, in which car lift resistance factor will be equal to the allowable value (critical force. To assess the impact on the value of the longitudinal force speed, coefficients of the vertical and horizontal dynamics, as well as the wind load on the side surface of the car body are the results of calculations of motion of the empty gondola car, model № 12-532 curve radius of 250 m with a rise of 150 mm and a transverse run of body of car frame relative to the track axis of the guide section 50 mm. Originality. In this study, the technique of determining the longitudinal compressive force was shown, that is somewhat different from the standard. So, as well as assessing the impact on it the speed of rolling coefficients of vertical and horizontal dynamics and wind load on the side surface of the car body. Practical value. The authors developed proposals on the enhancement of existing methods for determining the value of the longitudinal compressive forces acting on the car in which the safety value of the car lift resistance factor will be equal to the allowable value. It will evaluate the

  10. 49 CFR 176.76 - Transport vehicles, freight containers, and portable tanks containing hazardous materials.

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Transport vehicles, freight containers, and... TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS CARRIAGE BY VESSEL General Handling and Stowage § 176.76 Transport... paragraphs (b) through (f) of this section, hazardous materials authorized to be transported by vessel may be...

  11. 49 CFR 174.85 - Position in train of placarded cars, transport vehicles, freight containers, and bulk packagings.

    2010-10-01

    ... Vehicles and Freight Containers § 174.85 Position in train of placarded cars, transport vehicles, freight... position in a train of each loaded placarded car, transport vehicle, freight container, and bulk packaging..., and other specially equipped cars with tie-down devices for securing vehicles. Permanent bulk head...

  12. Containment vessel bottom head transport and lifting technique

    Zheng Donghong; Tian Shiyong; Hu Dequan; Xiao Hongtao

    2013-01-01

    The challengeable transport and lifting techniques and high safety assurance measures are needed for the onsite construction of the AP1000 containment vessel bottom head (CVBH), which is a large component with heavy weight, big size, high center of gravity, and easy to deformation. During transport, the infra structural road foundation is heavily loaded with big turning radius, and the requirement for synchronization of transport vehicles is strict. During lifting, the crane lifting capacities are high, requirement for the lifting and rigging tools is strict, nuclear island being put into place is difficult, and the crane operating foundation is heavily loaded. The transport and lifting techniques and safety assurance measures for CVBH are elaborated in detail, so as to provide a reference for the follow-up transport and lifting of large components of nuclear island. (authors)

  13. 49 CFR 174.61 - Transport vehicles and freight containers on flat cars.

    2010-10-01

    ... cars. 174.61 Section 174.61 Transportation Other Regulations Relating to Transportation PIPELINE AND... containers on flat cars. (a) A transport vehicle, freight container, or package containing a hazardous... has fuel or any article classed as a hazardous material may be loaded and transported on a flat car as...

  14. Forecasting Container Shipping Freight Rates for the Far East-Northern Europe Trade Lane

    Munim, Ziaul Haque; Schramm, Hans-Joachim

    2016-01-01

    econometric and time series modelling have been rather limited. Therefore, in this paper, we discuss contemporary container freight rate dynamics in an attempt to forecast for the Far East to Northern Europe trade lane. Methodology-wise, we employ autoregressive integrated moving average (ARIMA) as well......This study introduces a state-of-the-art volatility forecasting method for container shipping freight rates. Over the last decade, the container shipping industry has become very unpredictable. The demolition of the shipping conferences system in 2008 for all trades calling a port in the European...

  15. Development of a type IP-2 freight container and leak testing during the longitudinal and transverse racking tests

    Holden, G.V.

    2002-01-01

    The leak performance of freight containers has never been particularly well defined within the UK and up to the publication of 'A DETR guide to the approval of freight containers as IP-2 and IP-3 packages' freight containers with twin rear doors were acceptable as IP-2/3 packages. The containment argument has usually been based on providing adequate load securing and transport under exclusive use (with no transhipment between modes). Hence the likelihood for dropping the freight container during transhipment is eliminated. These arguments are less acceptable to competent authorities and the document above requires that leak integrity is determined during the standard freight container tests. This paper outlines the methodology used to determine the acceptable leak rate from the container (in terms of a pressure drop); the justification for conducting leak testing during racking only; the results of tests and difficulties that were overcome during design. (author)

  16. Defining freight rates as a contribution to the successful operation of container shipping companies

    Renato Oblak

    2016-12-01

    Full Text Available The globalization of the world market and the flexibility of containerization to adjust to the constant changes in supply and demand of the international goods market, has led to a continuous increase in the portion of the container transport within the international maritime cargo transport. By the increase of the container transport level, the impact and importance of container freight rates have been growing, the variability of which directly reflects on the world economy. The aim of this paper is to analyze the efficiency of actual methods in establishing the container freight rates according to the problems which appear in the container shipping operation and refer to large differences in the weights of the actual transported cargo and the declared cargo in containers. The consequence of is lower freight rates and higher costs of the vessels exploitation, concerning the increase of the bunker oil consumption. The conducted research is based on actual data that have been collected and analyzed from particular container vessel liner services within period of 90 days and casting off from 16 container ports. The proposed measures could increase the level of usability of the transporting ships capacities and enable a more accurate and correct account of sea freight rates. The results of the research have shown that by increasing the control of accuracy of the cargo weight in containers and by improving the model of accounting, the freight rates can increase the incomes of shipping companies maintaining the same level of container traffic, which can have a direct influence on the efficiency of their successful operation.

  17. 49 CFR 174.84 - Position in train of loaded placarded rail cars, transport vehicles, freight containers or bulk...

    2010-10-01

    ... CARRIAGE BY RAIL Handling of Placarded Rail Cars, Transport Vehicles and Freight Containers § 174.84 Position in train of loaded placarded rail cars, transport vehicles, freight containers or bulk packagings... 49 Transportation 2 2010-10-01 2010-10-01 false Position in train of loaded placarded rail cars...

  18. 49 CFR 176.170 - Transport of Class 1 (explosive) materials in freight containers.

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Transport of Class 1 (explosive) materials in... REGULATIONS CARRIAGE BY VESSEL Detailed Requirements for Class 1 (Explosive) Materials Cargo Transport Units and Shipborne Barges § 176.170 Transport of Class 1 (explosive) materials in freight containers. (a...

  19. Lift-based up-ender and methods using same to manipulate a shipping container containing unirradiated nuclear fuel

    Nilles, Michael J.

    2017-08-01

    A shipping container containing an unirradiated nuclear fuel assembly is lifted off the ground by operating a crane to raise a lifting tool comprising a winch. The lifting tool is connected with the shipping container by a rigging line connecting with the shipping container at a lifting point located on the shipping container between the top and bottom of the shipping container, and by winch cabling connecting with the shipping container at the top of the shipping container. The shipping container is reoriented by operating the winch to adjust the length of the winch cabling so as to rotate the shipping container about the lifting point. Shortening the winch cabling rotates the shipping container about the lifting point from a horizontal orientation to a vertical orientation, while lengthening the winch cabling rotates the shipping container about the lifting point from the vertical orientation to the horizontal orientation.

  20. America's container ports : freight hubs that connect our nation to global markets

    2009-06-01

    The U.S. marine transportation system continues to handle large volumes of domestic and international freight in support of the nations economic activities. The demand for freight transportation responds to trends in global economic activity and m...

  1. Work inside ocean freight containers--personal exposure to off-gassing chemicals.

    Svedberg, Urban; Johanson, Gunnar

    2013-11-01

    More than 500 million ocean freight container units are shipped annually between countries and continents. Residual levels of fumigants, as well as naturally occurring off-gassing chemicals emanating from the goods, constitute safety risks, which may affect uniformed workers upon entering the container. The aim of this study was to assess workers' exposure during stripping of containers and is the first study of its kind. First, an experimental tracer gas method was investigated to determine its usefulness to approximate real exposures from gaseous fumigants and off-gassing volatile organic compounds (VOCs). Nitrous oxide was injected and left to distribute in the closed containers. The distribution of the tracer gas and initial (arrival) concentrations of off-gassing volatiles were measured prior to opening the containers. Second, personal exposure (breathing zone) and work zone air monitoring of both tracer gas and VOCs were carried out during stripping. Adsorbent tubes, bag samples, and direct-readings instruments (photoionization detector and Fourier transform infrared spectrometry) were used. The distribution studies with nitrous oxide, and the high correlation between the former and VOCs (r(2) ~ 0.8) during stripping, showed that the tracer gas method may well be used to approximate real exposures in containers. The average breathing zone and work zone concentrations during stripping of naturally ventilated 40-foot containers were 1-7% of the arrival concentrations; however, peaks up to 70% were seen during opening. Even if average exposures during stripping are significantly lower than arrival concentrations, they may still represent serious violations of occupational exposure limits in high-risk containers. The results from this and previous studies illustrate the need to establish practices for the safe handling of ocean freight containers. Until comprehensive recommendations are in place, personnel that need to enter such containers should, in addition to

  2. The North American Transborder Freight Database

    Department of Transportation — The North American Transborder Freight Database, available since April 1993, contains freight flow data by commodity type and by mode of transportation (rail, truck,...

  3. TECHNICAL AND REGULATORY CONSIDERATIONS IN USING FREIGHT CONTAINERS AS INDUSTRIAL PACKAGES

    Opperman, E; Mark Hawk, M; Ron Natali, R

    2007-10-16

    The United States (US) Department of Energy (DOE), Office of Environmental Management (EM), is actively pursuing activities to reduce the radiological risk and clean up the environmental legacy of the nation's nuclear weapons programs. EM has made significant progress in recent years in the clean-up and closure of sites and is also focusing on longer-term activities necessary for the completion of the clean-up program. The packaging and transportation of contaminated demolition debris and low-level waste (LLW) materials in a safe and cost-effective manner are essential in completing this mission. Toward this end, the US Department of Transportation's (DOT) Final Rule on Hazardous Materials Regulation Final Rule issued January 26, 2004, included a new provision authorizing the use of Freight Containers (e.g., 20 and 40-foot ISO Containers) as Industrial Packages Type 1, 2, or 3 (IP-1, IP-2, and IP-3). This paper will discuss the technical and regulatory considerations in using these newly authorized and large packages for the packaging and transportation of LLW materials.

  4. Technical and Regulatory Considerations in Using Freight Containers as Industrial Packages

    Hawk, Mark B [ORNL; Opperman, Erich [Washington Savannah River Company; Natali, Ronald [R. B. Natali Consulting, Inc.

    2008-01-01

    The US Department of Energy (DOE), Office of Environmental Management (EM), is actively pursuing activities to reduce the radiological risk and clean up the environmental legacy of the nation's nuclear weapons programmes. The EM has made significant progress in recent years in the clean-up and closure of sites and is also focusing on longer term activities necessary for the completion of the clean-up programme. The packaging and transportation of contaminated demolition debris and low level waste materials in a safe and cost effective manner are essential in completing this mission. Toward this end, the US Department of Transportation's Final Rule on Hazardous Materials Regulation issued on 26 January 2004, included a new provision authorising the use of freight containers (e.g. 20 and 40 ft ISO containers) as industrial packages type 2 or 3. This paper will discuss the technical and regulatory considerations in using these newly authorised and large packages for the packaging and transportation of low level waste materials.

  5. The standardised freight container: vector of vectors and vector-borne diseases.

    Reiter, P

    2010-04-01

    The standardised freight container was one of the most important innovations of the 20th Century. Containerised cargoes travel from their point of origin to their destination by ship, road and rail as part of a single journey, without unpacking. This simple concept is the key element in cheap, rapid transport by land and sea, and has led to a phenomenal growth in global trade. Likewise, containerised air cargo has led to a remarkable increase in the inter-continental transportation of goods, particularly perishable items such as flowers, fresh vegetables and live animals. In both cases, containerisation offers great advantages in speed and security, but reduces the opportunity to inspect cargoes in transit. An inevitable consequence is the globalisation of undesirable species of animals, plants and pathogens. Moreover, cheap passenger flights offer worldwide travel for viral and parasitic pathogens in infected humans. The continued emergence of exotic pests, vectors and pathogens throughout the world is an unavoidable consequence of these advances in transportation technology.

  6. Public announcement of guidelines for the packing and safe stowing of cargo in freight containers and vehicles for ocean transport (Container Stowage Guidelines)

    1987-01-01

    The IMO and ILO guidelines are given, which help to meet the requirements of the Maritime Safety Ordinance and the Ordinance on Ocean Transport of Dangerous Goods. The guidelines explain the principles of safe packing and stowing of cargo in freight containers and vehicles for ocean transports. Further information and practical hints are given in international publications referred to in the annex. The guidelines are also meant for training purposes. (orig./HSCH) [de

  7. Facial Skin Lifting and Brightening Following Sleep on Copper Oxide Containing Pillowcases

    Gadi Borkow

    2016-07-01

    Full Text Available Copper plays a key role in many of the physiological processes that occur in the skin. Previously it was found that sleeping on pillowcases impregnated with microscopic copper oxide particles results in reduction of wrinkles and fine lines. In the current study, it was examined if sleeping on copper oxide impregnated pillowcases results also in skin lifting and skin brightness. A four week, double blind, randomized study was performed, during which 45 women, aged 37–54, slept on copper oxide containing pillowcases (test group, n = 23 or on control pillowcases without copper oxide (control group, n = 22. Facial and eye skin surface was measured using an F-ray 3D measurement system and surface analysis was conducted using Image-pro® plus. Skin brightness was measured using a tristimulus colorimeter. Sleeping on the test pillowcases resulted in statistically significant skin lifting on the cheek area (p = 0.039 and eye area (p = 0.001 after four weeks of use as compared to baseline. The mean skin brightness in those sleeping on the test pillowcases increased after two (p = 0.024 and four weeks (p = 0.008. No statistically significant changes occurred during the study in the study participants using the control pillowcases. Statistically significant differences between both groups were recorded at two and four weeks for skin brightness and skin lifting, respectively. In conclusion, sleeping on copper oxide containing pillowcases results in facial skin lifting and brightness of the skin.

  8. Canadian East Coast offshore petroleum industry safe lifting practices respecting offshore pedestal cranes, offshore containers, loose gear, other lifting devices, and operational best practices : standard practices

    NONE

    2007-11-15

    This document was developed by a working group with representatives from the petroleum industry, the Offshore Petroleum Boards and Certifying Authorities. It outlines industry best practices for operators responsible for the management, planning and execution of offshore lifting operations. Its purpose is to assist in the interpretation of applicable legislation and standards. Considered within the practice are safe design requirements, manufacture, certification, testing, maintenance and inspection requirements for pedestal cranes, offshore containers, loose gear and lifting devices. Operational best practices for lifting operations are also included along with a section that identifies additional requirements for personnel lifting operations, including personnel transfers by crane and man-riding operations. 82 refs., 2 tabs., 4 figs., 3 appendices.

  9. Modelling freight transport

    Tavasszy, L.A.; Jong, G. de

    2014-01-01

    Freight Transport Modelling is a unique new reference book that provides insight into the state-of-the-art of freight modelling. Focusing on models used to support public transport policy analysis, Freight Transport Modelling systematically introduces the latest freight transport modelling

  10. The design, manufacture, and testing of a new generation of ISO freight container for certification as an IP-2 package in compliance with the IAEA Regulations for the Safe Transport of Radioactive Material, 1985 edition (as amended 1990)

    Urch, K.C.

    1997-01-01

    Solid low level radioactive waste (LLW) which arises at nuclear power stations and other nuclear facilities in the UK, is routinely transported to British Nuclear Fuels' site at Drigg in Cumbria for disposal. A requirement was identified for the use of a refurbished ISO freight container of the full-height design, to transport drummed LLW to the site of a supercompaction facility prior to disposal at Drigg. This paper describes the reasoned technical justification employed for certifying the refurbished ISO freight container, Design No. 2912B, as an IP-2 package under Paragraph 523 of the IAEA Transport Regulations and the development of a new generation of ISO Freight container, Design No. 2044. It was recognised that the use of a refurbished container was only an interim measure and because of significant changes in the acceptance criteria for disposal, the increased use of high force compaction techniques and the proposed amendments to the IAEA Transport Regulations, Nuclear Electric embarked upon the development of a new generation of ISO freight containers. The new container design (Design No. 2044) incorporates a readily decontaminable stainless steel interior, a comprehensive load restraint system designed for the transport of single and multiple packages, and is lined with a polyurethane foam between the inner and outer skins. It is designed to transport 70 off, 200 litre drums of LLW (stacked in two layers) and other payloads of size not greater than 4 m long x 2 m wide and 20 tonnes in weight. The container was subjected to a range of tests to prove compliance with the ISO standard and the IAEA Transport Regulations. Following the preparation of the required documentation, in particular a Safety Case and comprehensive Operating and Maintenance Instructions, a Certificate of Regulatory Compliance was issued by the appropriate authority certifying the container as an Industrial Package Type 2 (IP-2) suitable for the transport of drummed LLW and other

  11. Multimodal freight investment criteria.

    2010-07-01

    Literature was reviewed on multi-modal investment criteria for freight projects, examining measures and techniques for quantifying project benefits and costs, as well as ways to describe the economic importance of freight transportation. : A limited ...

  12. Assessing sustainable freight policies.

    2014-05-01

    The main aim of the study was to examine transportation demand management strategies related to long haul freight. It investigates freight : movements and truck vehicle miles traveled (TVMT) changes in response to certain transportation policies, inc...

  13. Forecasting freight flows

    Lyk-Jensen, Stéphanie

    2011-01-01

    Trade patterns and transport markets are changing as a result of the growth and globalization of international trade, and forecasting future freight flow has to rely on trade forecasts. Forecasting freight flows is critical for matching infrastructure supply to demand and for assessing investment...... constitute a valuable input to freight models for forecasting future capacity problems.......Trade patterns and transport markets are changing as a result of the growth and globalization of international trade, and forecasting future freight flow has to rely on trade forecasts. Forecasting freight flows is critical for matching infrastructure supply to demand and for assessing investment...

  14. Stochastic Modeling of Unloading and Loading Operations at a Container Terminal using Automated Lifting Vehicles

    D. Roy (Debjit); M.B.M. de Koster (René)

    2015-01-01

    textabstractWith growing worldwide trade, container terminals have grown in number and size. Many new terminals are now automated to increase operational efficiency. The key focus is on improving seaside processes, where a distinction can be made between single quay crane operations (all quay

  15. Optimal Stack Layout in a Sea Container Terminal with Automated Lifting Vehicles

    D. Roy (Debjit); A. Gupta (Akash); S. Parhi (Sampanna); M.B.M. de Koster (René)

    2014-01-01

    textabstractContainer terminal performance is largely determined by its design decisions, which include the number and type of quay cranes (QCs), stack cranes (SCs), transport vehicles, vehicle travel path, and stack layout. The terminal design process is complex because it is affected by factors

  16. Freight transport and intermodality

    Barbero Mañanes, Eduardo

    2010-01-01

    During recent decades, there has been very substantial growth in the freight transport sector. Freight transport is increasing faster than the economy or passenger transport. Demand is increasing more rapidly than supply and is resulting in environmental and social problems. Increasing congestion, too, is affecting efficient and reliable freight distribution, and consequently having a deleterious effect on local economies. Intermodality is therefore needed to make better use of alternative mo...

  17. Optimal Stack Layout in a Sea Container Terminal with Automated Lifting Vehicles

    Roy, D.; Gupta, A.; Parhi, S.; de Koster, M.B.M.

    2014-01-01

    textabstractContainer terminal performance is largely determined by its design decisions, which include the number and type of quay cranes (QCs), stack cranes (SCs), transport vehicles, vehicle travel path, and stack layout. The terminal design process is complex because it is affected by factors such as topological constraints, stochastic interactions among the quayside, vehicle transport and stackside operations. Further, the orientation of the stack layout (parallel or perpendicular to the...

  18. 49 CFR 174.82 - General requirements for the handling of placarded rail cars, transport vehicles, freight...

    2010-10-01

    ... rail cars, transport vehicles, freight containers, and bulk packages. 174.82 Section 174.82... Placarded Rail Cars, Transport Vehicles and Freight Containers § 174.82 General requirements for the handling of placarded rail cars, transport vehicles, freight containers, and bulk packages. (a) Unless...

  19. Tornado lift

    Ivanchin, Alexander

    2010-01-01

    It is shown that one of the causes for tornado is Tornado Lift. At increasing vortex diameter its kinetic energy decreases to keep the moment of momentum constant. A kinetic energy gradient of such vortex is Tornado Lift. Evaluation shows that contribution of Tornado Lift in air lifting in a tornado is comparable to buoyancy according to the order of magnitude.

  20. Case Study on the Use of X Ray or Gamma Radiation Scanning for the Detection of People Seeking to Enter a State Illegally in Vehicles or Freight Containers. Annex III

    2014-01-01

    This summary describes the main elements of the justification case for the use of X ray or gamma radiation scanning for the detection of stowaways as published by the UK Home Office]. In the United Kingdom, the rate of clandestine entry by people concealed in vehicles or freight containers at ferry ports and the Eurotunnel Folkestone Terminal is very high. People who have been detected attempting to enter illegally in east Kent alone, including the Port of Dover, numbered over 17 000 in 1999 and 19 700 in 2000. Detection measures in use include carbon dioxide (CO 2 ) sensors, which give a quick and generally reliable indication of concealed human presence, and search teams of dogs. Both these measures, however, have fairly significant limitations. For example, certain types of freight emit CO 2 , thus masking the presence of humans. Also, the construction of some containers prevents examination by CO 2 sensors. Alternative measures are sometimes employed, such as the physical unloading of full freight loads. This is a very costly and time consuming process, and can only be used in a limited number of cases. As a consequence, the UK immigration service is planning to deploy X ray or gamma radiation scanners at UK ports and control zones to detect people seeking to circumvent UK immigration controls. This practice would be integrated with other search techniques to provide a balanced and effective search regime. In most cases, scanners would be used as a second phase of checking, that is, as a form of confirmation where a first phase of checking (e.g. CO 2 sensors) has provided inconclusive results

  1. Case Study on the Use of X Ray or Gamma Radiation Scanning for the Detection of People Seeking to Enter a State Illegally in Vehicles or Freight Containers. Annex III

    2018-01-01

    This summary describes the main elements of the justification case for the use of X ray or gamma radiation scanning for the detection of stowaways as published by the UK Home Office]. In the United Kingdom, the rate of clandestine entry by people concealed in vehicles or freight containers at ferry ports and the Eurotunnel Folkestone Terminal is very high. People who have been detected attempting to enter illegally in east Kent alone, including the Port of Dover, numbered over 17 000 in 1999 and 19 700 in 2000. Detection measures in use include carbon dioxide (CO 2 ) sensors, which give a quick and generally reliable indication of concealed human presence, and search teams of dogs. Both these measures, however, have fairly significant limitations. For example, certain types of freight emit CO 2 , thus masking the presence of humans. Also, the construction of some containers prevents examination by CO 2 sensors. Alternative measures are sometimes employed, such as the physical unloading of full freight loads. This is a very costly and time consuming process, and can only be used in a limited number of cases. As a consequence, the UK immigration service is planning to deploy X ray or gamma radiation scanners at UK ports and control zones to detect people seeking to circumvent UK immigration controls. This practice would be integrated with other search techniques to provide a balanced and effective search regime. In most cases, scanners would be used as a second phase of checking, that is, as a form of confirmation where a first phase of checking (e.g. CO 2 sensors) has provided inconclusive results

  2. International Passenger and Freight Report

    Department of Transportation — The International Passenger and Freight report is a summarization of all passengers and all freight transported between the U.S. and foreign countries combined, with...

  3. Electronic Freight Management Case Studies : a Summary of Results

    2012-04-01

    The Electronic Freight Management (EFM) initiative is a USDOT-sponsored project that applies Web technologies that improve data and message transmissions between supply chain partners. The EFM implementation case studies contained in this document ex...

  4. Air cargo in the Mid-America Freight Coalition region.

    2012-08-01

    This report contains a contextual review of air cargo transportation in the 10-state Mid-America Freight Coalition (MAFC) region including the industrys recent history, security implications, and integration within the greater MAFC economy. The re...

  5. Helicopter Toy and Lift Estimation

    Shakerin, Said

    2013-01-01

    A $1 plastic helicopter toy (called a Wacky Whirler) can be used to demonstrate lift. Students can make basic measurements of the toy, use reasonable assumptions and, with the lift formula, estimate the lift, and verify that it is sufficient to overcome the toy's weight. (Contains 1 figure.)

  6. Freight Shuttle System: Cross-Border Movement of Goods

    Levien, Mary

    2011-05-31

    The Freight Shuttle System (FSS) is designed to provide freight transportation services between those short and intermediate distance locations (within 600 miles) that are currently handling large volumes of freight traffic. Much like trucks, the FSS's transporters are autonomous: each transporter has its own propulsion and travels independently of other transporters. Inspired by railroads, each FSS transporter has steel wheels operating on a steel running surface and can carry either a standardsize freight container or an over-the-road truck trailer. However, unlike either rail or trucks, the FSS runs on an elevated, dedicated guideway to avoid the interference of other transportation systems. The objective of this report is to examine the potential viability for an alternative transportation system for trailers and containers in a multi-national, cross-border setting. The El Paso-Ciudad Juarez region serves as the environment of this analysis.

  7. Mechanical load on the low back and shoulders during pushing and pulling of two-wheeled waste containers compared with lifting and carrying of bags and bins.

    Schibye, B; Søgaard, K; Martinsen, D; Klausen, K

    2001-08-01

    Compare the mechanical load on the low back and shoulders during pushing and pulling a two-wheeled container with the load during lifting and carrying the same amount of waste. Only little is known about risk factors and mechanical loads during push/pull operations. A complete 2(3) factor push/pull experiment. A two-wheeled container with 25 or 50 kg was pushed in front of and pulled behind the body by seven waste collectors. Further, the same subjects lifted and carried a paper bag and a dustbin both loaded with 7 and 25 kg. All operations were video recorded and the push/pull force was measured by means of a three-dimensional force transducer. Peak Motus and Watbak software were used for digitising and calculation of torque at L4/L5 and the shoulder joints and compression and shear forces at L4/L5. During pushing and pulling the compression at L4/L5 is from 605 to 1445 N. The extension torque at L4/L5 produced by the push/pull force is counteracted by the forward leaning of the upper body. The shear force is below 202 N in all situations. The torque at the shoulders is between 1 and 38 Nm. In the present experiments the torques at the low back and the shoulders are low during pushing and pulling. No relation exists between the size of the external force and the torque at the low back and the shoulder. Pushing and pulling are common in many workplaces and have often replaced lifting and carrying situations. This has emphasised the need for more knowledge of the internal mechanical load on the body during these activities.

  8. Uncovering Document Fraud in Maritime Freight Transport Based on Probabilistic Classification

    Triepels , Ron; Feelders , Ad; Daniels , Hennie

    2015-01-01

    Part 4: Data Analysis and Information Retrieval; International audience; Deficient visibility in global supply chains causes significant risks for the customs brokerage practices of freight forwarders. One of the risks that freight forwarders face is that shipping documentation might contain document fraud and is used to declare a shipment. Traditional risk controls are ineffective in this regard since the creation of shipping documentation is uncontrollable by freight forwarders. In this pap...

  9. Breast lift

    ... and areola may be moved. Sometimes, women have breast augmentation (enlargement with implants) when they have a breast lift. Why the ... MD, FACS, general surgery practice specializing in breast cancer, Virginia Mason Medical Center, Seattle, WA. Also reviewed ...

  10. Ontario freight movement study

    Anon.

    1995-11-01

    The freight (cargo) transportation sector accounts for a major use of fossil fuels and contributes significantly to greenhouse gas emissions. A study was conducted to estimate and forecast emissions from transportation in Ontario, by mode, over the next 15 years, and to examine ways in which those emissions could be reduced. Published data of freight transportation industries was used to examine the fuel consumption characteristics of each mode, followed by a review of emission rates. It was determined that truck transportation accounts for most CO 2 emissions (about 70%). Rail follows with 21% and the marine and air modes contribute relatively small shares (6% and 2%). New intermodal technologies being introduced by the railways were discussed. They have been designed to make intermodal transport more accessible to a wider segment of the freight market. A recommendation was made which would require all truck shipments over 500 km, accounting for fully one half of truck tonne-km, to have their line-haul component diverted to this new more fuel-efficient mode (i.e., from truck to rail). refs., tabs., figs

  11. White papers on freight efficiency.

    2016-05-31

    A number of stakeholders met with the ultimate goal of identifying inefficiencies faced by the freight system and putting forward a set of : strategies to achieve a more efficient freight system. In doing so, a key first step was to provide insight a...

  12. Uncovering Document Fraud in Maritime Freight Transport Based on Probabilistic Classification

    Triepels, Ron; Feelders, A.J.; Daniels, Hennie

    2015-01-01

    Deficient visibility in global supply chains causes significant risks for the customs brokerage practices of freight forwarders. One of the risks that freight forwarders face is that shipping documentation might contain document fraud and is used to declare a shipment. Traditional risk controls are

  13. Uncovering document fraud in maritime freight transport based on probabilistic classification

    Triepels, Ron; Feelders, A. F.; Daniels, Hennie

    2015-01-01

    Deficient visibility in global supply chains causes significant risks for the customs brokerage practices of freight forwarders. One of the risks that freight forwarders face is that shipping documentation might contain document fraud and is used to declare a shipment. Traditional risk controls are

  14. Economic Analysis Framework for Freight Transportation Based on Florida Statewide Multi-Modal Freight Model

    2018-02-01

    Freight transportation plays a vital role in local and regional economy. The markets and businesses from different regions and locations can be connected through freight movements. But it is difficult to quantify the economic contribution of freight ...

  15. The freight landscape : using secondary data sources to describe metropolitan freight flows.

    2015-12-01

    Metropolitan areas around the world are seeking to better manage freight flows and reduce negative impacts on local populations. A major challenge to better urban freight management is the lack of data; little is known about freight movements at the ...

  16. The freight landscape : using secondary data sources to describe metropolitan freight flows : final report.

    2015-12-01

    Metropolitan areas around the world are seeking to better manage freight flows and reduce negative impacts on local populations. A major challenge to better urban freight management is the lack of data; little is known about freight movements at the ...

  17. Improved efficiency of lifting freight on inclined mine shafts

    Molchanov, A A

    1980-01-01

    Design and operating principles are described for a self-propelled inclined lifter with hinged-lever mechanism of forced compression of the drive wheels to the rails. Limit values are defined for the main parameters of the traction device.

  18. Improving freight crash incident management.

    2015-06-01

    The objective of this study was to determine the most effective way to mitigate the effect of freight : crash incidents on Louisiana freeways. Candidate incident management strategies were reviewed from : practice in other states and from those publi...

  19. Electronic Freight Management (EFM) Governance

    2012-03-01

    The Electronic Freight Management (EFM) initiative is a USDOT-sponsored project that applies web technologies to improve data and message transmissions between supply chain partners. This report describes a new EFM Governance Model and the necessary ...

  20. Freight performance measures : approach analysis.

    2010-05-01

    This report reviews the existing state of the art and also the state of the practice of freight performance measurement. Most performance measures at the state level have aimed at evaluating highway or transit infrastructure performance with an empha...

  1. Road freight and the environment

    Makamo, N

    2015-07-01

    Full Text Available freight transport are categorised as direct or secondary impacts. Externalities are an economic concept that refers to activities that have unintended consequences, positive or negative consequences. This review considers the different environmental links...

  2. Understanding and Modeling Freight Stakeholder Behavior

    2012-04-01

    This project developed a conceptual model of private-sector freight stakeholder decisions and interactions for : forecasting freight demands in response to key policy variables. Using East Central Wisconsin as a study area, empirical : models were de...

  3. 78 FR 11727 - National Freight Advisory Committee

    2013-02-19

    ... performance in freight transportation; (6) development of freight transportation investment, data, and...; (3) availability and willingness to serve; and (4) relevant experience in working in committees and... minorities, women, and persons with disabilities. Please note, however, that federally registered lobbyists...

  4. Urban freight distribution: council warehouses & freight by rail

    Aleksander SŁADKOWSKI

    2014-10-01

    Full Text Available Rail is the one of the highly underused form of freight transportation in the European Union. Majority of the freightage are distributed by trucks and HGVs. With new regulations and socio-environmental concerns urban logistics is facing a new challenge which can be tackled using innovative transport mechanisms and streamline operations. This article sheds light on a system which integrates freight distribution via metro lines in the closest vicinity of the customer, use of council warehouses and further innovative transport mechanisms for final delivery. This system uses existing infrastructure effectively without impacting its surroundings and triggers the reduction of polluting carriers. This system offers the option of immediate implementation which will enable EU to compete with a global freight distribution market.

  5. America's container ports : linking markets at home and abroad

    2011-01-01

    This report provides an overview of the movement of maritime freight handled by the Nations container ports in 2009 through mid-2010, based on the most current available data through that time period. It summarizes trends in maritime freight movem...

  6. Could Expanded Freight Rail Reduce Air Pollution from Trucks?

    Bickford, E. E.; Holloway, T.; Johnston, M.

    2010-12-01

    Cars, trucks and trains are a significant source of emissions that impact both climate and air quality on regional to global scales. Diesel vehicles, most used for freight transport, account for 42% of on-road nitrogen oxide emissions, 58% of on-road fine particulate emissions, and 21% of on-road carbon dioxide emissions. With freight tonnage projected to increase 28% by 2018, and freight trucks the fastest growing source of transportation emissions, we evaluate the potential for increased rail capacity to reduce the environmental impacts of trucks. Most widely available mobile source emissions inventories contain insufficient spatial detail to quantify realistic emission scenario options, and none to date have been linked with commodity flow information in a manner appropriate to consider the true potential of rail substitution. To support a truck-to-rail analysis, and other policy assessments requiring roadway-by-roadway analysis, we have developed a freight emissions inventory for the Upper Midwest based on the Federal Highway Administration’s Freight Analysis Framework version 2.2 and the Environmental Protection Agency’s on-road emissions model, Mobile6.2. Using a Geographical Information System (GIS), we developed emissions scenarios for truck-to-rail modal shifts where 95% of freight tonnage on trips longer than 400 miles is shifted off of trucks and onto railways. Scenarios will be analyzed with the Community Multiscale Air Quality (CMAQ) regional model to assess air quality impacts of associated changes. By using well-respected transportation data and realistic assumptions, results from this study have the potential to inform decisions on transportation sustainability, carbon management, public health, and air quality.

  7. Variable Lifting Index (VLI): A New Method for Evaluating Variable Lifting Tasks.

    Waters, Thomas; Occhipinti, Enrico; Colombini, Daniela; Alvarez-Casado, Enrique; Fox, Robert

    2016-08-01

    We seek to develop a new approach for analyzing the physical demands of highly variable lifting tasks through an adaptation of the Revised NIOSH (National Institute for Occupational Safety and Health) Lifting Equation (RNLE) into a Variable Lifting Index (VLI). There are many jobs that contain individual lifts that vary from lift to lift due to the task requirements. The NIOSH Lifting Equation is not suitable in its present form to analyze variable lifting tasks. In extending the prior work on the VLI, two procedures are presented to allow users to analyze variable lifting tasks. One approach involves the sampling of lifting tasks performed by a worker over a shift and the calculation of the Frequency Independent Lift Index (FILI) for each sampled lift and the aggregation of the FILI values into six categories. The Composite Lift Index (CLI) equation is used with lifting index (LI) category frequency data to calculate the VLI. The second approach employs a detailed systematic collection of lifting task data from production and/or organizational sources. The data are organized into simplified task parameter categories and further aggregated into six FILI categories, which also use the CLI equation to calculate the VLI. The two procedures will allow practitioners to systematically employ the VLI method to a variety of work situations where highly variable lifting tasks are performed. The scientific basis for the VLI procedure is similar to that for the CLI originally presented by NIOSH; however, the VLI method remains to be validated. The VLI method allows an analyst to assess highly variable manual lifting jobs in which the task characteristics vary from lift to lift during a shift. © 2015, Human Factors and Ergonomics Society.

  8. Freight transport in towns. [Denmark]. Godstransport i byer; Hovedrapport

    1992-10-01

    The aim was to evaluate a number of possibilities for reducing energy consumption and thus air pollution caused by freight transport in urban areas. The Danish towns of Vejle and Roskilde were taken as examples and the two towns were compared with regard to the town plan, use of land area, the road network, amount of traffic and commercial structure. Economical aspects and the most important initiatives for improvements, including a decrease in traffic accidents, are discussed. These initiatives are coordination of transportation by firms, more drivers using the same vehicles, less frequent deliveries, optimazation of route planning, car sharing, special routes for lorries, traffic and speed control, better siting of new transport functions, re-siting of firms dependent on freight transport, the use of smaller vehicles where possible, no transport of people in trucks or vans, less use of bicycles for transporting messages, more use of underground pipes for transport of materials, lifting equipment for smaller vans and trucks, lifting equipment that is more flexible, motors turned off when loading and loading, reduction of emballage volume, and a more careful way of driving which can help to reduce energy consumption. A computer programme was constructed in order to calculate energy consumption in these relations, emission of hydrocarbons, carbon monoxide, nitrogen oxides and particles, transportation costs and number of traffic accidents. Results are presented in detail and discussed. (AB) (78 refs.).

  9. Freight transport in towns. Main report; Godstransport i byer. Hovedrapport

    1992-10-01

    The aim was to evaluate a number of possibilities for reducing energy consumption and thus air pollution caused by freight transport in urban areas. The Danish towns of Vejle and Roskilde were taken as examples and the two towns were compared with regard to the town plan, use of land area, the road network, amount of traffic and commercial structure. Economical aspects and the most important initiatives for improvements, including a decrease in traffic accidents, are discussed. These initiatives are coordination of transportation by firms, more drivers using the same vehicles, less frequent deliveries, optimazation of route planning, car sharing, special routes for lorries, traffic and speed control, better siting of new transport functions, re-siting of firms dependent on freight transport, the use of smaller vehicles where possible, no transport of people in trucks or vans, less use of bicycles for transporting messages, more use of underground pipes for transport of materials, lifting equipment for smaller vans and trucks, lifting equipment that is more flexible, motors turned off when loading and loading, reduction of emballage volume, and a more careful way of driving which can help to reduce energy consumption. A computer programme was constructed in order to calculate energy consumption in these relations, emission of hydrocarbons, carbon monoxide, nitrogen oxides and particles, transportation costs and number of traffic accidents. Results are presented in detail and discussed. (AB) (78 refs.).

  10. European intermodal freight transport network

    Saeedi, Hamid; Wiegmans, Bart; Behdani, Behzad; Zuidwijk, Rob

    2017-01-01

    The analysis of market structure and concentration measures for the Intermodal Freight Transport (IFT) market is important to avoid market failure and to find the areas for policy making to promote IFT market share. This analysis can be performed for separate segments, for example, the market for

  11. Scheduling freight trains in rail-rail transshipment yards

    Nils Boysen; Erwin Pesch

    2008-01-01

    Transshipment yards, where gantry cranes allow for an effcient transshipment of containers between different freight trains, are important entities in modern railway systems and facilitate the general shift from point-to-point transport to hub-and-spoke railway systems. Modern rail-rail transshipment yards accelerate container handling, so that multiple smaller trains with equal destination can be consolidated to a reduced number of trains without jeopardizing on time deliveries. An important...

  12. Trends in road freight transportation carbon dioxide emissions and policies in China

    Li, Hongqi; Lu, Yue; Zhang, Jun; Wang, Tianyi

    2013-01-01

    We adopted the simple average Divisia index approach to explore the impacts of factors on the carbon dioxide (CO 2 ) emissions from road freight transportation in China from 1985 to 2007. CO 2 emissions were investigated using the following as influencing factors: the emission coefficient, vehicle fuel intensity, working vehicle stock per freight transport operator, market concentration level, freight transportation distance, market share of road freight transportation, ton-kilometer per value added of industry, industrialization level and economic growth. Building on the results, we suggest that economic growth is the most important factor in increasing CO 2 emissions, whereas the ton-kilometer per value added of industry and the market concentration level contribute significantly to decreasing CO 2 emissions. We also discussed some recent important policies concerning factors contained in the decomposition model. - Highlights: ► We estimated road freight fuel consumption and CO 2 emissions in China. ► Factors implying features of road freight were considered in decomposition model. ► Some policies were discussed to affect CO 2 emissions from road freight

  13. Freight from space : evaluating freight activity and emissions from satellite data.

    2013-06-01

    In this report, the authors investigate the current state of knowledge of freight transport emissions, the importance of freight emissions relative to other sources, and what tools are available, or can be developed to answer these questions and impr...

  14. Lift application development cookbook

    Garcia, Gilberto T

    2013-01-01

    Lift Application Development Cookbook contains practical recipes on everything you will need to create secure web applications using this amazing framework.The book first teaches you basic topics such as starting a new application and gradually moves on to teach you advanced topics to achieve a certain task. Then, it explains every step in detail so that you can build your knowledge about how things work.This book is for developers who have at least some basic knowledge about Scala and who are looking for a functional, secure, and modern web framework. Prior experience with HTML and JavaScript

  15. 78 FR 8686 - Establishment of the National Freight Network

    2013-02-06

    ... includes the National Highway System, freight intermodal connectors, and aerotropolis \\1\\ transportation systems. \\1\\ Aerotropolis transportation systems means a planned and coordinated multimodal freight and...

  16. Improving Urban Freight Governance and Stakeholder Management

    Gammelgaard, Britta; Bech Godskesen Andersen, Christina; Figueroa, Maria J.

    2017-01-01

    Urban freight transport is a complex field characterised by many actors and stakeholders and thus many rationalities are at stake. This paper contributes to literature on urban freight governance by approaching the field with social system theory combined with the concepts of relationship platforms...... and value co-creation. This approach facilitates an improved process to foster implementation of innovative urban freight solutions that is illustrated by means of an analysis of the Copenhagen Citylogistik-kbh demonstration project. The results of this analysis indicate that attaining a shared sense...... of value creation among stakeholders through this process is key to implementation of new urban freight solutions....

  17. Study of Freight Transport Trip Chains

    Jørgensen, Kaj

    1999-01-01

    Investigation of energy use and emissions (CO2, NOx, THC, CO, SO2, PM) of freight trains and lorries. The report documents the establishment of energy and emission factors, and in particularly the issue of energy use of freight train is treated in detail.......Investigation of energy use and emissions (CO2, NOx, THC, CO, SO2, PM) of freight trains and lorries. The report documents the establishment of energy and emission factors, and in particularly the issue of energy use of freight train is treated in detail....

  18. Lift truck safety review

    Cadwallader, L.C.

    1997-03-01

    This report presents safety information about powered industrial trucks. The basic lift truck, the counterbalanced sit down rider truck, is the primary focus of the report. Lift truck engineering is briefly described, then a hazard analysis is performed on the lift truck. Case histories and accident statistics are also given. Rules and regulations about lift trucks, such as the US Occupational Safety an Health Administration laws and the Underwriter's Laboratories standards, are discussed. Safety issues with lift trucks are reviewed, and lift truck safety and reliability are discussed. Some quantitative reliability values are given

  19. Lift truck safety review

    Cadwallader, L.C.

    1997-03-01

    This report presents safety information about powered industrial trucks. The basic lift truck, the counterbalanced sit down rider truck, is the primary focus of the report. Lift truck engineering is briefly described, then a hazard analysis is performed on the lift truck. Case histories and accident statistics are also given. Rules and regulations about lift trucks, such as the US Occupational Safety an Health Administration laws and the Underwriter`s Laboratories standards, are discussed. Safety issues with lift trucks are reviewed, and lift truck safety and reliability are discussed. Some quantitative reliability values are given.

  20. Management Accounting in freight-forwarding companies

    Jensen, Jens Ocksen; Lynggaard, Peter

    2002-01-01

    The article describes the internal business management processes in a freight forwarding compagny on the operative/tactical level. This is done as an explorative study of how these processes are organized in two medium-sized Danish freight-forwarding compagnies....

  1. Urban freight transportation : Challenges, failure, and successes

    Kant, Goos; Quak, H.; Peeters, Rene; Woensel van, T.; Zijm, H.; Klumpp, M.; Clausen, U.; Ten Hompel, M.

    2016-01-01

    In this paper, we present the challenges, failures and successes on urban freight transportation. We first identify the various involved stakeholders with their interests. Then we evaluate a large number of urban freight transport initiatives and identify lessons learned, which are distinguished in

  2. Urban freight transportation : challenges, failures and successes

    Kant, G.; Quak, H.; Peeters, R.; van Woensel, T.; Zijm, H.; Klumpp, M.; Clausen, U.; ten Hompel, M.

    2016-01-01

    In this paper, we present the challenges, failures and successes on urban freight transportation. We first identify the various involved stakeholders with their interests. Then we evaluate a large number of urban freight transport initiatives and identify lessons learned, which are distinguished in

  3. Consolidation and coordination in urban freight transport

    van Heeswijk, W.J.A.

    2017-01-01

    Due to growing urbanization, fragmentation of freight flows, and increasingly strict delivery conditions, cities around the world have to deal with a vastly increasing number of freight transport flows. Carriers are unable to efficiently bundle these flows, resulting in inefficient urban transport.

  4. 49 CFR 215.119 - Defective freight car truck.

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Defective freight car truck. 215.119 Section 215... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS Freight Car Components Suspension System § 215.119 Defective freight car truck. A railroad may not place or continue in service a...

  5. Partiality and Container Monads

    Uustalu, Tarmo; Veltri, Niccolò

    2017-01-01

    the relationship between containers and lifting monads. We show that the lifting monads usually employed in type theory can be specified in terms of containers. Moreover, we give a precise characterization of containers whose interpretations carry a lifting monad structure. We show that these conditions...

  6. Sea freight - Antwerp Port

    NEACSU Nicoleta Andreea

    2017-01-01

    Full Text Available Shipping plays a vital role in achieving the movement of goods, both in terms of quantity and efficiency. This paper presents the role and advantages of shipping in the global economy and analyzes the development and Antwerp Port activity. Currently, the second most important trading port in Europe and 14th in the ranking of most important ports that handle containers worldwide, the Port of Antwerp, Belgium is a port in the heart of Europe, accessible to large sized vessels. 200 years of constructing infrastructure and logistics around the central location, as well as pressure from Rotterdam, that had an impact on the competitiveness of the port of Antwerp, all this led the port to occupy a leading position in the top rankings.

  7. Lift scheduling organization : Lift Concept for Lemminkainen

    Mingalimov, Iurii

    2015-01-01

    The purpose of the work was to make a simple schedule for the main contractors and clients to check and control workflow connected with lifts. It gathers works with electricity, construction, engineering networks, installing equipment and commissioning works. The schedule was carried out during working on the building site Aino in Saint Petersburg in Lemminkӓinen. The duration of work was 5 months. The lift concept in Lemminkӓinen is very well controlled in comparison with other buil...

  8. US Advanced Freight and Passenger MAGLEV System

    Morena, John J.; Danby, Gordon; Powell, James

    1996-01-01

    Japan and Germany will operate first generation Maglev passenger systems commercially shortly after 2000 A.D. The United States Maglev systems will require sophisticated freight and passenger carrying capability. The U.S. freight market is larger than passenger transport. A proposed advanced freight and passenger Maglev Project in Brevard County Florida is described. Present Maglev systems cost 30 million dollars or more per mile. Described is an advanced third generation Maglev system with technology improvements that will result in a cost of 10 million dollars per mile.

  9. Determination of dynamic performance of freight cars taking into account technical condition of side bearers

    S.Myamlin

    2013-02-01

    Full Text Available Purpose. The railway transport plays an important role in social and economic life of the country and carries out the large containment of transportation activities. The transport industry should migrate towards innovation changes and increase its significance as an important transit subsystem on the way of renovation of both the infrastructure and the strategy of all transportation process components including the interaction with other transport modes. At present the life sets strategic challenges for the railway branch, and the basic goals among them are as follows: high-speed train traffic development, increase of the weight of freight trains, new rolling stock development etc. Due to the urgency of this subject, the researchers should cope with the task devoted to one of aspects of improving the freight transportation efficiency, namely to the study of effects of various factors and characteristics of technical conditions of the freight cars running gears (which are unavoidable to arise during operation on their basic dynamic indices. The deviations of technical conditions of running gears from the normal state of the wedge system of bogie swing suspension also play an important role among them. The purpose of the paper is to investigate the influence of different factors of the technical conditions of freight car running gears (size deviation in both the bearers and the wedge system during operation on their basic indices – coefficients of horizontal and vertical dynamics, vehicle body acceleration, frame strength, and derailment stability coefficient. Methodology. The study was conducted by numerical integration and mathematical modeling of the freight car dynamic loading using the software package “Dynamics of Rail Vehicles” (“DYNRAIL”. Findings. As a result of the research for freight car dynamic coefficients determination taking into account technical conditions of the side bearers, the dependencies of the basic freight cars

  10. Analysis of Freight Transport Strategies and Methodologies

    2017-12-01

    Transportation agencies are often blind to freight flows at the last mile level of truck movements. New strategies, data sources, and analytics have the potential to provide an empirical understanding of last mile truck movements and their impa...

  11. Rural freight rail and multimodal transportation improvements.

    2015-05-18

    In this time of globalization, urbanization, congestions and increasing fuel prices, the growing importance of both freight and passenger transportation has been widely acknowledged. However, the importance of competitive transportation for rural Ame...

  12. Rail industry job analysis : freight conductor.

    2013-03-01

    This document describes the results from a job analysis that was conducted for the position of Freight Conductor. Key aspects of the position were identified, including main tasks and knowledge, skills, abilities, and other characteristics (KSAOs) ne...

  13. Safeguarding Schiphol Airports accessibility for freight transport

    van der Heijden, Matthijs C.; van Harten, Aart; Ebben, Mark; Saanen, Y.A.; Valentin, E.C.; Verbraeck, A.

    2001-01-01

    Automated, underground freight transport should enable sustainable economic growth in the Amsterdam area in the Netherlands. An innovative transport system, which guarantees reliable logistics and which avoids congestion problems, is currently being developed. This logistics system will be highly

  14. Macro scale models for freight railroad terminals.

    2016-03-02

    The project has developed a yard capacity model for macro-level analysis. The study considers the detailed sequence and scheduling in classification yards and their impacts on yard capacities simulate typical freight railroad terminals, and statistic...

  15. DETERMINATION OF OBJECTIVES FOR URBAN FREIGHT POLICY

    Daniel Kaszubowski

    2014-12-01

    Full Text Available Background: Decisions regarding strategic planning of urban freight transport very often are based on superficial assumptions inadequately reflecting the actual character of encountered challenges. The trend may be observed to adapt isolated solutions without supporting measures and verification of expected outcomes. Selected urban freight solutions have a significant potential to alleviate transport related problems, but they require unorthodox approach beyond standard traffic planning and road management. City's current planning experience must be taken into account to plan an optimized sequence of actions. Method: Due to complexity of the problem and specific decision making factors the analytic network process ANP was selected to determine relevant objective of the urban freight policy. Gdynia was selected as the subject for modeling with a review of the current freight planning practice as a first step. Then, classification of policy objective and their prerequisites were identified supported with descriptive feasibility assessment. This allowed for a development of the ANP decision-making model. Results: Considered objectives for urban freight policy were identified were optimization, reduction and transfer. After verifying relevant decision factors optimization was selected as the most feasible option for Gdynia. Other alternatives were rated around four times lower with a slight prevalence of reduction over transfer. Such ranking reflects current planning practice and availability of transferable experiences. Despite the indicative results, it must be stressed that urban freight planning should be based on the long term methodical approach not to exclude any emerging possibilities. 

  16. Face-Lift

    ... or sun damage, you might also consider a skin-resurfacing procedure. A face-lift can be done in combination with some other cosmetic procedures, such as a brow lift or eyelid surgery. Why it's done As you get older, your facial skin changes — sagging and becoming loose. This can make ...

  17. A simulation model for intermodal freight transportation in Louisiana.

    2015-01-01

    With increased emphasis on intermodal transportation development, the issue of how to evaluate an intermodal freight transportation system and provide intermodal solutions has been receiving intensive attention. In order to improve freight flow effic...

  18. Sensor network design for multimodal freight transportation systems.

    2009-10-15

    The agricultural and manufacturing industries in the US Midwest region rely heavily on the efficiency of freight transportation systems. While the growth of freight movement far outpaces that of the transportation infrastructure, ensuring the efficie...

  19. Feasibility of freight villages in the NYMTC region.

    2011-03-23

    This report summarizes the work conducted to analyze the site impact of freight villages. The analysis included assessing traffic, : logistics and economic impacts, which are then used to determine the extent to which freight village development has ...

  20. Report on a Six-Year versus Eight-Year Textbook Adoption Cycle and Prepaid Freight.

    Texas Education Agency, Austin.

    This report, submitted to the 71st Texas Legislature in fulfillment of the mandates contained in House Concurrent Resolution 84, summarizes a study of the feasibility of an 8-year cycle for the adoption of certain textbooks and considers the feasibility of contracting with textbook publishers on a freight prepaid basis. First, 6-year versus 8-year…

  1. Research on Linear Wireless Sensor Networks Used for Online Monitoring of Rolling Bearing in Freight Train

    Wang Nan; Meng Qingfeng; Zheng Bin; Li Tong; Ma Qinghai

    2011-01-01

    This paper presents a Wireless Sensor Networks (WSNs) technique for the purpose of on-line monitoring of rolling bearing in freight train. A new technical scheme including the arrangements of sensors, the design of sensor nodes and base station, routing protocols, signal acquirement, processing and transmission is described, and an on-line monitoring system is established. Considering the approximately linear arrangements of cars and the running state of freight train, a linear topology structure of WSNs is adopted and five linear routing protocols are discussed in detail as to obtain the desired minimum energy consumption of WSNs. By analysing the simulation results, an optimal multi-hop routing protocol named sub-section routing protocol according to equal distance is adopted, in which all sensor nodes are divided into different groups according to the equal transmission distance, the optimal transmission distance and number of hops of routing protocol are also studied. We know that the communication consumes significant power in WSNs, so, in order to save the limit power supply of WSNs, the data compression and coding scheme based on lifting integer wavelet and embedded zerotree wavelet (EZW) algorithms is studied to reduce the amounts of data transmitted. The experimental results of rolling bearing have been given at last to verify the effectiveness of data compression algorithm. The on-line monitoring system of rolling bearing in freight train will be applied to actual application in the near future.

  2. Research on Linear Wireless Sensor Networks Used for Online Monitoring of Rolling Bearing in Freight Train

    Wang Nan; Meng Qingfeng; Zheng Bin [Theory of Lubrication and Bearing Institute, Xi' an Jiaotong University Xi' an, 710049 (China); Li Tong; Ma Qinghai, E-mail: heroyoyu.2009@stu.xjtu.edu.cn [Xi' an Rail Bureau, Xi' an, 710054 (China)

    2011-07-19

    This paper presents a Wireless Sensor Networks (WSNs) technique for the purpose of on-line monitoring of rolling bearing in freight train. A new technical scheme including the arrangements of sensors, the design of sensor nodes and base station, routing protocols, signal acquirement, processing and transmission is described, and an on-line monitoring system is established. Considering the approximately linear arrangements of cars and the running state of freight train, a linear topology structure of WSNs is adopted and five linear routing protocols are discussed in detail as to obtain the desired minimum energy consumption of WSNs. By analysing the simulation results, an optimal multi-hop routing protocol named sub-section routing protocol according to equal distance is adopted, in which all sensor nodes are divided into different groups according to the equal transmission distance, the optimal transmission distance and number of hops of routing protocol are also studied. We know that the communication consumes significant power in WSNs, so, in order to save the limit power supply of WSNs, the data compression and coding scheme based on lifting integer wavelet and embedded zerotree wavelet (EZW) algorithms is studied to reduce the amounts of data transmitted. The experimental results of rolling bearing have been given at last to verify the effectiveness of data compression algorithm. The on-line monitoring system of rolling bearing in freight train will be applied to actual application in the near future.

  3. Assessing public benefits and costs of freight transportation projects : measuring shippers' value of delay on the freight system.

    2012-07-01

    Freight delay is detrimental to the national economy. In an effort to gauge the economic impact of freight delay due : to highway congestion, this project focuses on estimating shippers value of delay (VOD). We have accomplished : this through thr...

  4. 78 FR 75442 - Designation of the Primary Freight Network

    2013-12-11

    ...] Designation of the Primary Freight Network AGENCY: Federal Highway Administration (FHWA), DOT. ACTION: Notice... period for the Designation of the highway Primary Freight Network (PFN) notice, which was published on... the complete National Freight Network (NFN), and to solicit comments on aspects of the NFN. The five...

  5. Multimodal schedule design for synchromodal freight transport systems

    B. Behdani (Behzad); Y. Fan (Yun); B.W. Wiegmans (Bart); R.A. Zuidwijk (Rob)

    2016-01-01

    textabstractIntermodal freight transport has been discussed for decades as an alternative to unimodal road transport. However, it still does not represent a significant portion of the total freight market. A new and promising possibility to improve the performance of freight systems is the

  6. Multimodal schedule design for synchromodal freight transport systems

    Behdani, Behzad; Fan, Yun; Wiegmans, Bart; Zuidwijk, Rob

    2016-01-01

    Intermodal freight transport has been discussed for decades as an alternative to unimodal road transport. However, it still does not represent a significant portion of the total freight market. A new and promising possibility to improve the performance of freight systems is the synchromodal

  7. Lower complexity bounds for lifted inference

    Jaeger, Manfred

    2015-01-01

    instances of the model. Numerous approaches for such “lifted inference” techniques have been proposed. While it has been demonstrated that these techniques will lead to significantly more efficient inference on some specific models, there are only very recent and still quite restricted results that show...... the feasibility of lifted inference on certain syntactically defined classes of models. Lower complexity bounds that imply some limitations for the feasibility of lifted inference on more expressive model classes were established earlier in Jaeger (2000; Jaeger, M. 2000. On the complexity of inference about...... that under the assumption that NETIME≠ETIME, there is no polynomial lifted inference algorithm for knowledge bases of weighted, quantifier-, and function-free formulas. Further strengthening earlier results, this is also shown to hold for approximate inference and for knowledge bases not containing...

  8. Participation for Sustainable Urban Freight Transport Systems : A Case Study of Freight Receivers in the City of Gothenburg

    Lindkvist, Hannes

    2017-01-01

    This thesis is a case study research that look into the difficulty in engaging freight receivers in initiatives related to urban freight transport. The aim of the paper is to investigate how participatory processes could be formed for more successful outcomes and how the freight receivers could become more engaged in the processes. By conducting a qualitative research where primarily interviews with freight receivers and other concerned stakeholder were made, it was possible to distinguish di...

  9. Wind tower service lift

    Oliphant, David; Quilter, Jared; Andersen, Todd; Conroy, Thomas

    2011-09-13

    An apparatus used for maintaining a wind tower structure wherein the wind tower structure may have a plurality of legs and may be configured to support a wind turbine above the ground in a better position to interface with winds. The lift structure may be configured for carrying objects and have a guide system and drive system for mechanically communicating with a primary cable, rail or other first elongate member attached to the wind tower structure. The drive system and guide system may transmit forces that move the lift relative to the cable and thereby relative to the wind tower structure. A control interface may be included for controlling the amount and direction of the power into the guide system and drive system thereby causing the guide system and drive system to move the lift relative to said first elongate member such that said lift moves relative to said wind tower structure.

  10. Ontario freight movement study: component two

    Hackston, D.; Lake, R.; Schwier, C.; Tardif, L.P.; English, G.; Bunting, M.

    1995-11-01

    The freight (cargo) transportation sector accounts for a major use of fossil fuels and contributes significantly to greenhouse gas emissions. A study was conducted to assess the prospects, in terms of CO 2 emission reduction, of alternatives to present freight distribution, especially alternatives involving the use of rail instead of truck. Statistical data for Ontario freight transportation were analyzed for fuel consumption, CO 2 emission and cost consequences. Railway fuel consumption was calculated for detailed routing descriptions using a model that computed route and service specific fuel use. The information was compared directly with truck fuel consumption. It was determined that shippers who needed quick, accurately timed shipments preferred trucking over rail, while price conscious shippers, or those with heavy loading commodities preferred rail. An important goal of the study was to identify the enormity of the challenges involved, and clarify the potential tradeoffs by showing different strategies, with respect to CO 2 reduction and related economic impacts. refs., tabs., figs

  11. Containment

    Anon.

    1987-01-01

    The primary mission of the Containment Group is to ensure that underground nuclear tests are satisfactorily contained. The main goal is the development of sound technical bases for containment-related methodology. Major areas of activity include siting, geologic description, emplacement hole stemming, and phenomenological predictions. Performance results of sanded gypsum concrete plugs on the Jefferson, Panamint, Cornucopia, Labquark, and Bodie events are given. Activities are also described in the following areas: computational capabilities site description, predictive modeling, and cavity-pressure measurement. Containment publications are listed. 8 references

  12. Formulation of optimal international freight transport objective

    A. Jarašūnienė

    2002-10-01

    Full Text Available To increase the attraction of Lithuania as a transit country striving to promote carriers' border crossing activities and facilitate customs clearance procedures as well as freight delivery to clients it is necessary to identify the main obstacles, to analyse them and to select adequate measures and means for their elimination. Therefore, on the basis of the formulation of transport freight management objective, as well as basing on the assessment of indeterminacy of external impacts, it would be possible to deduce the main causes of idle time of transport means in customs, to estimate the dependence of service time in proportion to transport flow.

  13. Visual perception of fatigued lifting actions.

    Fischer, Steven L; Albert, Wayne J; McGarry, Tim

    2012-12-01

    Fatigue-related changes in lifting kinematics may expose workers to undue injury risks. Early detection of accumulating fatigue offers the prospect of intervention strategies to mitigate such fatigue-related risks. In a first step towards this objective, this study investigated whether fatigue detection was accessible to visual perception and, if so, what was the key visual information required for successful fatigue discrimination. Eighteen participants were tasked with identifying fatigued lifts when viewing 24 trials presented using both video and point-light representations. Each trial comprised a pair of lifting actions containing a fresh and a fatigued lift from the same individual presented in counter-balanced sequence. Confidence intervals demonstrated that the frequency of correct responses for both sexes exceeded chance expectations (50%) for both video (68%±12%) and point-light representations (67%±10%), demonstrating that fatigued lifting kinematics are open to visual perception. There were no significant differences between sexes or viewing condition, the latter result indicating kinematic dynamics as providing sufficient information for successful fatigue discrimination. Moreover, results from single viewer investigation reported fatigue detection (75%) from point-light information describing only the kinematics of the box lifted. These preliminary findings may have important workplace applications if fatigue discrimination rates can be improved upon through future research. Copyright © 2012 Elsevier B.V. All rights reserved.

  14. Regional changes in spine posture at lift onset with changes in lift distance and lift style

    Gill, K.P.; Bennet, S.J.; Savelsbergh, G.J.P.; van Dieen, J.H.

    2007-01-01

    STUDY DESIGN. Repeated measures experiment. OBJECTIVE. To determine the effect of changes in horizontal lift distance on the amount of flexion, at lift onset, in different spine regions when using different lift styles. SUMMARY OF BACKGROUND DATA. By approximating spine bending during lifting as a

  15. Freight advanced traveler information system : functional requirements.

    2012-08-01

    This report describes the System Requirement Specifications (SyRS) for a Freight Advanced Traveler Information System : (FRATIS). The SyRS is based on user needs described in the FRATIS Concept of Operations (ConOps), which cover the essential : func...

  16. Analyzing competition in intermodal freight transport networks

    Saeedi, Hamid; Wiegmans, Bart; Behdani, Behzad; Zuidwijk, Rob

    2017-01-01

    To cope with an intense and competitive environment, intermodal freight transport operators have increasingly adopted business practices —like horizontal and vertical business integration—which aim to reduce the operational costs, increase the profit margins, and improve their competitive position

  17. A hypersonic lift mechanism with decoupled lift and drag surfaces

    Xu, YiZhe; Xu, ZhiQi; Li, ShaoGuang; Li, Juan; Bai, ChenYuan; Wu, ZiNiu

    2013-05-01

    In the present study, we propose a novel lift mechanism for which the lifting surface produces only lift. This is achieved by mounting a two-dimensional shock-shock interaction generator below the lifting surface. The shock-shock interaction theory in conjunction with a three dimensional correction and checked with computational fluid dynamics (CFD) is used to analyze the lift and drag forces as function of the geometrical parameters and inflow Mach number. Through this study, though limited to only inviscid flow, we conclude that it is possible to obtain a high lift to drag ratio by suitably arranging the shock interaction generator.

  18. Waste Package Lifting Calculation

    H. Marr

    2000-01-01

    The objective of this calculation is to evaluate the structural response of the waste package during the horizontal and vertical lifting operations in order to support the waste package lifting feature design. The scope of this calculation includes the evaluation of the 21 PWR UCF (pressurized water reactor uncanistered fuel) waste package, naval waste package, 5 DHLW/DOE SNF (defense high-level waste/Department of Energy spent nuclear fuel)--short waste package, and 44 BWR (boiling water reactor) UCF waste package. Procedure AP-3.12Q, Revision 0, ICN 0, calculations, is used to develop and document this calculation

  19. Analysis of the interaction of participants freight forwarding system

    Pavlo Popovych

    2016-12-01

    Full Text Available Main goal of this work is the analysis of the interaction of participants of freight forwarding activities. Research methods included analysis of scientific literature, theory of systems and systems analysis, methods of induction and deduction. As sources of information used and applied work of fundamental importance known foreign and local scientists and regulatory and legislative documents of Ukraine for the state transport policy. In the article the basic interactions of participants of freight forwarding activities. Classified components freight forwarding services. Assign the concept freight forwarding system and its aim. Established element and forms of cooperation in the freight forwarding system. The main task of forwarding companies are organizing, coordinating and ensuring the delivery from shipper to consignee. Freight forwarding company responsible for the timely delivery of the goods on the condition of preservation of the quantity and quality specified time conditions. Currently used methods are uneffective decision-making, leading to losses. These circumstances require improvement methodology management of freight forwarding companies. This is possible only using modern mathematical methods and information technologies that will improve the operation of freight forwarding companies. The article presents a theoretical exposition of the basic processes of interaction between participants in freight forwarding system. The article may be of interest to specialists of freight forwarding companies.

  20. UF{sub 6} cylinder lifting equipment enhancements

    Hortel, J.M. [Martin Marietta Energy Systems, Inc., Piketon, OH (United States)

    1991-12-31

    This paper presents numerous enhancements that have been made to the Portsmouth lifting equipment to ensure the safe handling of cylinders containing liquid uranium hexafluoride (UF{sub 6}). The basic approach has been to provide redundancy to all components of the lift path so that any one component failure would not cause the load to drop or cause any undesirable movement.

  1. Freight from Space: Evaluating Freight Activity and Emissions Trends from Satellite Data

    Bickford, E.; Holloway, T.; Oberman, J.; Janssen, M.

    2012-12-01

    Heavy duty diesel freight trucks are the fastest growing source of highway emissions in the U.S., with domestic freight tonnage projected to double by 2050. Highway diesel vehicles currently account for 42% of on-road emissions of nitrogen oxides (NOx), 58% of on-road fine particulate (PM2.5) emissions, and 21% of on-road carbon dioxide emissions. Because most surface air quality monitors are located in densely populated areas and not rural highways, it is difficult to use ground-based observations to validate spatial trends in transportation emissions. Therefore, we have employed satellite retrievals from the OMI instrument to inform surface freight transportation inventory estimates by validating modeled tropospheric vertical column total nitrogen dioxide (NO2) against satellite observations. For this research we built a roadway-by-roadway bottom-up diesel truck emissions inventory using GIS, the U.S. Federal Highway Administration's Freight Analysis Framework (FAF) activity dataset, and the U.S. Environmental Protection Agency's MOVES emissions model. We use freight rail emissions from the Eastern Regional Technical Advisory Committee (ERTAC), inventory emissions from the Lake Michigan's Air Directors Consortium (LADCO) and the EPA's Community Multiscale Air Qualiy (CMAQ) model to simulate ground-level and tropospheric column concentrations of NO2. We also use the combination of models and satellite data to evaluate weekday-weekend patterns of NO2 concentrations and the relative contributions of highway diesel vehicles, highway gasoline vehicles, and freight rail to transportation-related pollution. This research presents the first evaluation of surface freight transport from space-based observations. We find satellite retrievals of surface pollutants provide a useful data tool for evaluating air quality models and constraining emissions sources.

  2. Knees Lifted High

    The Eagle Books are a series of four books that are brought to life by wise animal characters - Mr. Eagle, Miss Rabbit, and Coyote - who engage Rain That Dances and his young friends in the joy of physical activity, eating healthy foods, and learning from their elders about health and diabetes prevention. Knees Lifted High gives children fun ideas for active outdoor play.

  3. JWST Lifting System

    Tolleson, William

    2012-01-01

    A document describes designing, building, testing, and certifying a customized crane (Lifting Device LD) with a strong back (cradle) to facilitate the installation of long wall panels and short door panels for the GHe phase of the James Webb Space Telescope (JWST). The LD controls are variable-frequency drive controls designed to be adjustable for very slow and very-short-distance movements throughout the installation. The LD has a lift beam with an electric actuator attached at the end. The actuator attaches to a rectangular strong back (cradle) for lifting the long wall panels and short door panels from a lower angle into the vertical position inside the chamber, and then rotating around the chamber for installation onto the existing ceiling and floor. The LD rotates 360 (in very small increments) in both clockwise and counterclockwise directions. Eight lifting pads are on the top ring with 2-in. (.5-cm) eye holes spaced evenly around the ring to allow for the device to be suspended by three crane hoists from the top of the chamber. The LD is operated by remote controls that allow for a single, slow mode for booming the load in and out, with slow and very slow modes for rotating the load.

  4. LIFT11 linnas

    2010-01-01

    Tallinn 2011 programmi kuuluva installatsioonide festivali "Lift11" avalikule ideekonkursile esitati 129 tööd, välja valiti 17. Tutvustatakse Maarja Kase ja Ralf Lõokese tööd "L", Tomomi Hayashi tööd "Merele!", Toomas Paaveri, Teele Pehki ja Triin Talki tööd "Kalarand"

  5. Lift11 / Ingrid Ruudi

    Ruudi, Ingrid, 1978-

    2010-01-01

    23. augustist 11. oktoobrini 2010 toimuvast konkursist, mille eesmärk on leida kultuuripealinna üritusena toimuva linnainstallatsioonide festivali "Lift11" tarvis installatsioonide ideekavandeid. Festivali kuraatorid on kunstiteadlased Maarin Mürk ja Ingrid Ruudi ning arhitektid Margit Aule ja Margit Argus

  6. Heterotic weight lifting

    Gato-Rivera, B. [NIKHEF Theory Group, Kruislaan 409, 1098 SJ Amsterdam (Netherlands); Instituto de Fisica Fundamental, CSIC, Serrano 123, Madrid 28006 (Spain); Schellekens, A.N., E-mail: t58@nikhef.n [NIKHEF Theory Group, Kruislaan 409, 1098 SJ Amsterdam (Netherlands); Instituto de Fisica Fundamental, CSIC, Serrano 123, Madrid 28006 (Spain); IMAPP, Radboud Universiteit, Nijmegen (Netherlands)

    2010-03-21

    We describe a method for constructing genuinely asymmetric (2,0) heterotic strings out of N=2 minimal models in the fermionic sector, whereas the bosonic sector is only partly build out of N=2 minimal models. This is achieved by replacing one minimal model plus the superfluous E{sub 8} factor by a non-supersymmetric CFT with identical modular properties. This CFT generically lifts the weights in the bosonic sector, giving rise to a spectrum with fewer massless states. We identify more than 30 such lifts, and we expect many more to exist. This yields more than 450 different combinations. Remarkably, despite the lifting of all Ramond states, it is still possible to get chiral spectra. Even more surprisingly, these chiral spectra include examples with a certain number of chiral families of SO(10), SU(5) or other subgroups, including just SU(3)xSU(2)xU(1). The number of families and mirror families is typically smaller than in standard Gepner models. Furthermore, in a large number of different cases, spectra with three chiral families can be obtained. Based on a first scan of about 10% of the lifted Gepner models we can construct, we have collected more than 10,000 distinct spectra with three families, including examples without mirror fermions. We present an example where the GUT group is completely broken to the standard model, but the resulting and inevitable fractionally charged particles are confined by an additional gauge group factor.

  7. Heterotic weight lifting

    Gato-Rivera, B.; Schellekens, A.N.

    2010-01-01

    We describe a method for constructing genuinely asymmetric (2,0) heterotic strings out of N=2 minimal models in the fermionic sector, whereas the bosonic sector is only partly build out of N=2 minimal models. This is achieved by replacing one minimal model plus the superfluous E 8 factor by a non-supersymmetric CFT with identical modular properties. This CFT generically lifts the weights in the bosonic sector, giving rise to a spectrum with fewer massless states. We identify more than 30 such lifts, and we expect many more to exist. This yields more than 450 different combinations. Remarkably, despite the lifting of all Ramond states, it is still possible to get chiral spectra. Even more surprisingly, these chiral spectra include examples with a certain number of chiral families of SO(10), SU(5) or other subgroups, including just SU(3)xSU(2)xU(1). The number of families and mirror families is typically smaller than in standard Gepner models. Furthermore, in a large number of different cases, spectra with three chiral families can be obtained. Based on a first scan of about 10% of the lifted Gepner models we can construct, we have collected more than 10,000 distinct spectra with three families, including examples without mirror fermions. We present an example where the GUT group is completely broken to the standard model, but the resulting and inevitable fractionally charged particles are confined by an additional gauge group factor.

  8. Vertical vector face lift.

    Somoano, Brian; Chan, Joanna; Morganroth, Greg

    2011-01-01

    Facial rejuvenation using local anesthesia has evolved in the past decade as a safer option for patients seeking fewer complications and minimal downtime. Mini- and short-scar face lifts using more conservative incision lengths and extent of undermining can be effective in the younger patient with lower face laxity and minimal loose, elastotic neck skin. By incorporating both an anterior and posterior approach and using an incision length between the mini and more traditional face lift, the Vertical Vector Face Lift can achieve longer-lasting and natural results with lesser cost and risk. Submentoplasty and liposuction of the neck and jawline, fundamental components of the vertical vector face lift, act synergistically with superficial musculoaponeurotic system plication to reestablish a more youthful, sculpted cervicomental angle, even in patients with prominent jowls. Dramatic results can be achieved in the right patient by combining with other procedures such as injectable fillers, chin implants, laser resurfacing, or upper and lower blepharoplasties. © 2011 Wiley Periodicals, Inc.

  9. Lifting as You Climb

    Sullivan, Debra R.

    2009-01-01

    This article addresses leadership themes and answers leadership questions presented to "Exchange" by the Panel members who attended the "Exchange" Panel of 300 Reception in Dallas, Texas, last November. There is an old proverb that encourages people to lift as they climb: "While you climb a mountain, you must not forget others along the way." With…

  10. Developing a performance measurement approach to benefit/cost freight project prioritization.

    2014-10-01

    Future reauthorizations of the federal transportation bill will require a comprehensive and quantitative analysis of the freight benefits : of proposed freight system projects. To prioritize public investments in freight systems and to insure conside...

  11. Measuring the economic contribution of the freight industry to the Maryland economy : [research summary].

    2015-05-01

    The primary objective was to measure the economic contributions of the freight : industry to the Maryland economy and to develop a freight economic output (FECO) : index that tracks the economic performance of the freight industry over time.

  12. Energy Consumption and Freight Transport Demand in Denmark

    Salling, Kim Bang; Bonilla, David

    2008-01-01

    Considering the externalities of freight transport activity (energy use, accidents, congestion, its related GHG emissions, and lost oil revenues) this article reviews trends from 1990-2005 in truck freight fuel intensity (energy use per tonne-km moved), on road truck fuel economy (L/ 100 km driven......). We review changes in decoupling truck freight activity from GDP. We examine separately five manufacturing sectors using data from Statistics Denmark on vehicle performance for 1980-2006. Our four major findings are: (1) truck freight energy intensity (mj/tonne-km) continues to grow as well as CO2...... emissions; (2) decoupling has not been large enough to reduce overall energy use of truck; (3) because of the absence of fuel economy regulations, a low average vehicle load, increased hauling distance, overall energy use of truck freight will continue to expand; (4) results show that standard freight...

  13. TOPICAL PROBLEMS AND DEVELOPMENT PERSPECTIVES OF INTERNATIONAL FREIGHT TRANSPORT

    Sulce, Anastasija

    2014-01-01

    The title of thesis is Typical Problems and Development Perspectives of International Freight Transport. This work is dedicated to different modes of international transportation, freight and logistics their advantages and disadvantages. Another essential part of the work related to different way for transport development and its efficient usage The objective is to explore modes of freight transport and logistics in details and, thereof, reveal advantages and disadvantages. On the basis ...

  14. How Do Wings Generate Lift?

    ideas to get expressions for lift and moment that are remarkably accurate. The pressure ... ating a lift force, leads to a nose-up or nose-down moment also. .... venient to use for a fluid since we would like to deal with a flow .... energy to get lift?

  15. Fuel Cell Powered Lift Truck

    Moulden, Steve [Sysco Food Service, Houston, TX (United States)

    2015-08-20

    This project, entitled “Recovery Act: Fuel Cell-Powered Lift Truck Sysco (Houston) Fleet Deployment”, was in response to DOE funding opportunity announcement DE-PS36-08GO98009, Topic 7B, which promotes the deployment of fuel cell powered material handling equipment in large, multi-shift distribution centers. This project promoted large-volume commercialdeployments and helped to create a market pull for material handling equipment (MHE) powered fuel cell systems. Specific outcomes and benefits involved the proliferation of fuel cell systems in 5-to 20-kW lift trucks at a high-profile, real-world site that demonstrated the benefits of fuel cell technology and served as a focal point for other nascent customers. The project allowed for the creation of expertise in providing service and support for MHE fuel cell powered systems, growth of existing product manufacturing expertise, and promoted existing fuel cell system and component companies. The project also stimulated other MHE fleet conversions helping to speed the adoption of fuel cell systems and hydrogen fueling technology. This document also contains the lessons learned during the project in order to communicate the successes and difficulties experienced, which could potentially assist others planning similar projects.

  16. How to Park Freight Trains on Rail-Rail Transshipment Yards: The Train Location Problem

    Michael Kellner; Nils Boysen; Malte Fliedner

    2010-01-01

    In modern rail-rail transshipment yards huge gantry cranes spanning all railway tracks allow for an efficent transshipment of containers between different freight trains. This way, multiple trains loaded with cargo for varying destinations can be consolidated to a reduced number of homogeneous trains, which is an essential requirement of hub-and-spoke railway systems. An important problem during the daily operations of such a transshipment yard is the train location problem, which assigns eac...

  17. Integrating passenger and freight transportation : model formulation and insights

    Ghilas, V.; Demir, E.; Woensel, van T.

    2013-01-01

    Integrating passenger and freight ows creates attractive business opportunities because the same transportation needs can be met with fewer vehicles and emissions. This paper seeks an integrated solution for the transportation of passenger and freight simultaneously, so that fewer vehicles are

  18. Designing Light Electric Vehicles for urban freight transport

    Balm, S.H.; Hogt, Roeland

    2017-01-01

    The number of light commercial vehicles (LCV) in cities is growing, which puts increasing pressure on the livability of cities. Freight vehicles are large contributors to polluting air and CO2 emissions and generate problems in terms of safety, noise and loss of public space. Small electric freight

  19. 22 CFR 201.67 - Maximum freight charges.

    2010-04-01

    ..., commodity rate classification, quantity, vessel flag category (U.S.-or foreign-flag), choice of ports, and... the United States. (2) Maximum charter rates. (i) USAID will not finance ocean freight under any... owner(s). (4) Maximum liner rates. USAID will not finance ocean freight for a cargo liner shipment at a...

  20. Sustainable freight infrastructure to meet climate and air quality goals.

    2012-02-01

    This report examines the potential for freight modal shift from truck-to-rail in the upper Midwestern U.S. : to improve air quality and reduce CO2 emissions. Two scenarios were generated, one focusing on : intra-regional freight movements within the ...

  1. Feasibility study for the introduction of synchromodal freight transportation concept

    Agbo, Aaron Agbenyegah; Li, Wenfeng; Atombo, Charles; Lodewijks, G.; Zheng, Lanbo

    2017-01-01

    The current weaknesses of the conventional intermodal freight transportation system have led to the development of the synchromodal freight transportation concept introduced and piloted in the Netherlands. The innovative concept has the advantage of adding flexibility, cost reduction, and

  2. 49 CFR 1248.1 - Freight commodity statistics.

    2010-10-01

    ... 49 Transportation 9 2010-10-01 2010-10-01 false Freight commodity statistics. 1248.1 Section 1248... STATISTICS § 1248.1 Freight commodity statistics. All class I railroads, as described in § 1240.1 of this... statistics on the basis of the commodity codes named in § 1248.101. Carriers shall report quarterly on the...

  3. 48 CFR 52.247-7 - Freight Excluded.

    2010-10-01

    ... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Freight Excluded. 52.247-7... AND FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 52.247-7 Freight... contracts for transportation or for transportation-related services when any commodities or types of...

  4. Basic freight forwarding and transport
 documentation in freight forwarder’s work

    Adam Salomon

    2014-09-01

    Full Text Available The purpose of the article is to present the basic documentation in international freight forwarder’s work, in particular, insurance documents and transport documents in various modes of transport. An additional goal is to identify sources of the paper, which can be used to properly completing the individual documents.

  5. Knees Lifted High

    2008-08-04

    The Eagle Books are a series of four books that are brought to life by wise animal characters - Mr. Eagle, Miss Rabbit, and Coyote - who engage Rain That Dances and his young friends in the joy of physical activity, eating healthy foods, and learning from their elders about health and diabetes prevention. Knees Lifted High gives children fun ideas for active outdoor play.  Created: 8/4/2008 by National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP).   Date Released: 8/5/2008.

  6. Freight Calculation Model: A Case Study of Coal Distribution

    Yunianto, I. T.; Lazuardi, S. D.; Hadi, F.

    2018-03-01

    Coal has been known as one of energy alternatives that has been used as energy source for several power plants in Indonesia. During its transportation from coal sites to power plant locations is required the eligible shipping line services that are able to provide the best freight rate. Therefore, this study aims to obtain the standardized formulations for determining the ocean freight especially for coal distribution based on the theoretical concept. The freight calculation model considers three alternative transport modes commonly used in coal distribution: tug-barge, vessel and self-propelled barge. The result shows there are two cost components very dominant in determining the value of freight with the proportion reaching 90% or even more, namely: time charter hire and fuel cost. Moreover, there are three main factors that have significant impacts on the freight calculation, which are waiting time at ports, time charter rate and fuel oil price.

  7. A disaggregate freight transport model of transport chain and shipment size choice

    Windisch, E.; De Jong, G.C.; Van Nes, R.; Hoogendoorn, S.P.

    2010-01-01

    The field of freight transport modelling is relatively young compared to passenger transport modelling. However, some key issues in freight policy, like growing freight shares on the road, advanced logistics concepts or emerging strict freight transport regulations, have been creating increasing

  8. 49 CFR 216.11 - Special notice for repairs-railroad freight car.

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Special notice for repairs-railroad freight car...—railroad freight car. (a) When an FRA Motive Power and Equipment Inspector or a State Equipment Inspector determines that a railroad freight car is not in conformity with the requirements of the FRA Freight Car...

  9. Nuclear powered freight ships - safe and reliable

    Schafstall, H.C.

    1978-12-01

    The five nuclear-powered ships built in the world so far have entered over 100 ports in 14 countries about 1000 times in 15 years, during which there were no accidents endangering the safety of a ship. However, for the expansion of freight shipping with nuclear power, comprehensive international regulations for safety requirements, responsibility etc., are necessary. Although the NEA/IAEO symposium excluded economic questions on the safety of nuclear powered ships, the trends regarding further development in individual countries became clear

  10. Freight railway operator timetabling and engine scheduling

    Bach, Lukas; Gendreau, M.; Wøhlk, Sanne

    2015-01-01

    In this paper we consider timetable design at a European freight railway operator. The timetable is designed by choosing the time of service for customer unit train demands among a set of discrete points. These discrete points are all found within the a time-window. The objective of the model...... is to minimize cost while adhering to constraints regarding infrastructure usage, demand coverage, and engine availability. The model is solved by a column generation scheme where feasible engine schedules are designed in a label setting algorithm with time-dependent cost and service times....

  11. Energy efficiency practices among road freight hauliers

    Liimatainen, Heikki; Stenholm, Pekka; Tapio, Petri; McKinnon, Alan

    2012-01-01

    The reduction of greenhouse gases (GHG) is a highly prevalent public policy goal among European Union member countries. In the new White Paper on transport, the role of road freight transports in this is strongly emphasized. This far, however, the efficiency practices utilised in logistics firms are less studied. Drawing from policy goals and new survey data on 295 road transport firms our results show that hauliers are aware of the possible energy efficiency actions but lack the knowledge and resources to fully utilize them. Energy efficiency seems also to be unimportant for many shippers, so there are no incentives for hauliers to improve it. Examples from various countries show that clear energy efficiency improvements can be achieved with active cooperation between hauliers, shippers and policy makers. Such cooperation can be developed in Finland through the sectoral energy efficiency agreements. The novelty and the utility of these results allow scholars to answer important open questions in the national-level determinants of enhancing energy efficiency practices among road freight hauliers, and contribute to our understanding of how these can be fostered in public policies. - Highlights: ► Hauliers still monitor their fuel consumption with unsophisticated methods. ► Larger hauliers are more active in energy efficiency related issues than smaller ones. ► Hauliers are aware of energy efficiency actions, but lack knowledge of implementation. ► Finnish energy efficiency agreement provides a good framework for public policies. ► Companies that monitor and improve energy efficiency may gain competitive advantage.

  12. The Logistical Aspects of Freight Transportation and Forwarding

    Zimina Anna I.

    2017-04-01

    Full Text Available The article substantiates the theoretical and practical aspects of freight transportation and forwarding services based on the principles of logistics. The indicators of dynamics of freight transportation in Ukraine compared to last year and the structure by types of transport have been provided. The indicators of the foreign trade performance of Ukraine have been presented, including the counter-current export and import flows, as well as the external trade balance, which directly impacts the volume and dynamics of freight transportation and forwarding services. The main parameters of the transportation and forwarding logistics system were systematized, taking into consideration the technical and operational characteristics of the rolling stock, the route of communication, and the terminals. The role and features of the functions of the inter/multimodal transportation operators – freight forwarders of the «tonnage customers» have been considered. The article determines principles for the organization of work of freight forwarders, as well as the terms of agreement of the parties when the freight forwarding contract is concluded. The conditions for developing a logistics approach to the implementation of freight transportation and forwarding services have been generalized.

  13. Lifting devices in nuclear facilities

    The rule is valid for lifts, cranes, winches, rail travel trolleys, load lifting devices and fuel element changing devices for light-water reactors, insofar as these are used in plants to produce or to fission nuclear fuels or to process irradiated nuclear fuels or in the storage or other use of nuclear fuels. (LH) [de

  14. Project LIFT: Year 1 Report

    Norton, Michael; Piccinino, Kelly

    2014-01-01

    Research for Action (RFA) is currently in the second year of a five-year external evaluation of the Project Leadership and Investment for Transformation (LIFT) Initiative in the Charlotte-Mecklenburg School District (CMS). Project LIFT is a public-private partnership between CMS and the local philanthropic and business communities in Charlotte,…

  15. On structural inelasticity of modal substitution in freight transport

    Rich, Jeppe; Kveiborg, Ole; Overgård, Christian Hansen

    2011-01-01

    alternative available. The paper investigates the magnitude of this ‘‘structural inelasticity” of modal substitution in freight transport due to a sparser layout of rail and ship-based freight networks compared to road. In the analysis we use a recent Scandinavian freight demand model covering more than 800...... zones. We find that the structural inelasticity is very significant – in particular for transportation over less than 500 km. Moreover, the inelasticity varies greatly with commodity groups and between OD pairs, and it depends strongly on the port and rail infrastructure. The results suggest that pure...

  16. A scenarios study on future demands on container and truck sizes of the future

    B. Kraaijenhagen; Jan Jansen; H. Graser; Stef Weijers; I. Szylar

    2012-01-01

    To what extent will future demands of worldwide operating parties, regarding the (tertiary) packaging of their freight flows, determine or influence the future dimensions of freight trucks? That is the question we address to in this paper. In this study we have studied what container sizes may fit

  17. Columbus electronic freight management evaluation final report : June 2008.

    2008-06-01

    This document provides the independent evaluation of the USDOT-sponsored Columbus Electronic Freight Management (CEFM) Operational Test, which occurred from late May 2007 until December 2007. The Evaluation report includes descriptions of the CEFM sy...

  18. Implementing the Freight Transportation Data Architecture : Data Element Dictionary

    2015-01-01

    NCFRP Report 9: Guidance for Developing a Freight Data Architecture articulates the value of establishing architecture for linking data across modes, subjects, and levels of geography to obtain essential information for decision making. Central to th...

  19. Assessment of biodiesel scenarios for Midwest freight transport emission reduction.

    2010-04-01

    There are trade-offs when attempting to reduce both greenhouse gas and criteria air pollutants for freight transport, as the control : strategies are not necessarily complimentary. While emission controls can remove ozone precursors and particulate f...

  20. Calculation of freight externality costs for South Africa

    Stefaan Swarts

    2012-11-01

    Full Text Available The purpose of this study is to quantify the marginal external costs associated with freight transport in South Africa. Six cost elements are included as externality cost items, namely, costs related to accidents, emissions, roadway land availability, policing, noise and congestion. Inputs in the calculations were a gravity-oriented freight flow model, a road transport cost model, actual transport costs for other modes, a warehousing cost survey, an inventory delay calculation and various national sources of information such as accident statistics and government budgets. Estimation techniques resulted in advances for externality cost measurement in South Africa. The quantification of the cost elements will be used to update the South African Freight Demand Model. The results show that the cost of transportation would have been 20% more if external factors were taken into account. The marginal rates of externalities can be used to develop scenarios based on alternative choices for South Africa's freight transport infrastructure configuration.

  1. Sustainable freight transport in South Africa:Domestic intermodal solutions

    Jan H. Havenga

    2011-11-01

    Full Text Available Due to the rapid deregulation of freight transport in South Africa two decades ago, and low historical investment in rail (with resultant poor service delivery, an integrated alternative to road and rail competition was never developed. High national freight logistics costs, significant road infrastructure challenges and environmental impact concerns of a road-dominated freight transport market have, however, fuelled renewed interest in intermodal transport solutions. In this article, a high-level business case for domestic intermodal solutions in South Africa is presented. The results demonstrate that building three intermodal terminals to connect the three major industrial hubs (i.e. Gauteng, Durban and Cape Town through an intermodal solution could reduce transport costs (including externalities for the identified 11.5 million tons of intermodalfriendly freight flows on the Cape and Natal corridors by 42% (including externalities.

  2. Guidance for Developing a Freight Transportation Data Architecture

    2011-01-01

    Public and private decision makers must understand the freight transportation system, its use, its role in economic development, its environmental impact, as well as other consequences in order to respond effectively to growing logistical requirement...

  3. Energy usage optimisation of heavy haul freight trains

    Bogaers, Alfred

    2016-10-01

    Full Text Available tonnage and long distances an enormous amount of energy is required. Using classical mechanics, an energy usage model for typical freight trains based on available tractive power and typical rolling stock resistances (curvature, friction, gravity etc...

  4. Freight Transportation Energy Use : Volume 1. Summary and Baseline Results.

    1978-07-01

    The overall design of the TSC Freight Energy Model is presented. A hierarchical modeling strategy is used, in which detailed modal simulators estimate the performance characteristics of transportation network elements, and the estimates are input to ...

  5. Analysis of Freight Transport Strategies and Methodologies [summary

    2017-12-01

    Transportation planners constantly examine traffic flows to see if current roadway layouts are serving traffic needs. For freight hauling, this presents one issue on the open road, but a much different issue as these large vehicles approach their des...

  6. Unintended environmental impacts of nighttime freight logistics activities

    2010-10-01

    In recent years, the reduction of freight vehicle trips during peak hours has been a common : policy goal. To this end, policies have been implemented to shift logistics operations to : nighttime hours. The purpose of such policies has generally been...

  7. The impact of fracking on freight distribution patterns.

    2016-11-01

    The increasing production of domestic energy through the use of fracking will likely alter local/regional/national economies and corresponding freight distribution patterns (highway, rail, marine, pipeline) in the United States. The proposed project ...

  8. EU road freight transport sector : work and employment conditions

    Houtman, I.L.D.; Klein Hesselink, D.J.; Bossche, S.N.J. van den; Berg, R. van der; Heuvel, F. van den

    2004-01-01

    International competition and technological developments have had both positive and negative effects on the road freight transport sector. These changes have significantly influenced work and employment conditions in the sector. As this report highlights, creating more and better jobs while

  9. The Freight Transportation Services Index as a leading economic indicator

    2009-09-01

    The Bureau of Transportation Statistics (BTS) freight Transportation Services Index (TSI) showed a decline a full year and a half prior to the start of the current recession. This downturn suggests the TSI may prove particularly useful as an indic...

  10. Emissions and Air Quality Impacts of Freight Transportation

    Bickford, Erica

    Diesel freight vehicles (trucks + trains) are responsible for 20% of all U.S. nitrogen oxide (NOx) and 3% of fine particulate (PM2.5) emissions - pollutants that are harmful to human health. Freight tonnage is also projected to double over the next several decades, reaching 30 billion tons by 2050, increasing freight transport activity. Air quality impacts from increased activity, trade-offs between activity and vehicle technology improvements, as well as where to make infrastructure investments that encourage sustainable freight growth, are important considerations for transportation and air quality managers. To address these questions, we build a bottom-up roadway-by-roadway freight truck inventory (WIFE) and employ it to quantify emissions impacts of swapping biodiesel blends into the Midwest diesel freight truck fleet, and investigate emissions and air quality impacts of truck-to-rail freight modal shifts in the Midwest. We also evaluate the spatial and seasonal freight performance of WIFE modeled in a regional photochemical model (CMAQ) against satellite retrievals of nitrogen dioxide (NO2) from the Ozone Monitoring Instrument (OMI). Results show that spatial and seasonal distribution of biodiesel affects regional emissions impacts. Summer high-blend deployment yields a larger annual emissions reduction than year-round low-blend deployment, however, technological improvements in vehicle emissions controls between 2009 and 2018 dwarf the impacts of biodiesel. Truck-to-rail modal shift analysis found 40% of daily freight truck VMT could be shifted to rail freight, causing a 26% net reduction in NOx emissions, and 31% less carbon dioxide (CO2) emissions. Despite significant emissions impacts, air quality modeling results showed mostly localized near roadway air quality improvements, with small regional net changes; yet, federal regulation of CO2 emissions and/or rising costs of diesel fuel could motivate shifting freight to more fuel efficient rail. Evaluation of

  11. Wavelets and the Lifting Scheme

    la Cour-Harbo, Anders; Jensen, Arne

    The objective of this article is to give a concise introduction to the discrete wavelet transform (DWT) based on a technique called lifting. The lifting technique allows one to give an elementary, but rigorous, definition of the DWT, with modest requirements on the reader. A basic knowledge...... of linear algebra and signal processing will suffice. The lifting based definition is equivalent to the usual filer bank based definition of the DWT. The article does not discuss applications in any detail. The reader is referred to other articles in this collection....

  12. Wavelets and the lifting scheme

    la Cour-Harbo, Anders; Jensen, Arne

    2012-01-01

    The objective of this article is to give a concise introduction to the discrete wavelet transform (DWT) based on a technique called lifting. The lifting technique allows one to give an elementary, but rigorous, definition of the DWT, with modest requirements on the reader. A basic knowledge...... of linear algebra and signal processing will suffice. The lifting based definition is equivalent to the usual filer bank based definition of the DWT. The article does not discuss applications in any detail. The reader is referred to other articles in this collection....

  13. Wavelets and the lifting scheme

    la Cour-Harbo, Anders; Jensen, Arne

    2009-01-01

    The objective of this article is to give a concise introduction to the discrete wavelet transform (DWT) based on a technique called lifting. The lifting technique allows one to give an elementary, but rigorous, definition of the DWT, with modest requirements on the reader. A basic knowledge...... of linear algebra and signal processing will suffice. The lifting based definition is equivalent to the usual filer bank based definition of the DWT. The article does not discuss applications in any detail. The reader is referred to other articles in this collection....

  14. Coopetition in Intermodal Freight Transport Services

    Jian Liu

    2015-01-01

    Full Text Available The paper studies the coopetition of the downstream different carriers by providing complementary transport services in intermodal freight transport chain. Considering different information structure, a two-stage dynamic game model with simultaneous actions on investment and price is first formulated. Equilibria show both parties have motivation to select coopetition even if the agreement for cooperation investment is reached in advance. When both firms agree on the specific allocation, the new coopetition with higher efficiency would be emerged. Moreover, we analyze the complexity and evolution of coopetition by repeated pricing game with finitely and infinitely time horizon. In the finitely repeated pricing game, both firms have incentive to reach a tacit understanding to alternate choosing price cooperation and competition after setting suitable allocation scheme; the repeated periods t are then going to be an issue. In the infinitely repeated pricing game, the perfect cooperation is realized by designing the suitable trigger strategy.

  15. ORGANIZATION OF FREIGHT TRANSPORTATION IN UKRAINE IN THE REFORMATION CONDTIONS

    L. V. Martseniuk

    2014-04-01

    Full Text Available Purpose. Each country of the former Soviet Union carries out railroad industry reformation according to different models depending on orienting points and the goals it establishes. All railway administrations have faced the problem of considerable reduction of freight and passenger transportation volumes, aging of main assets, lack of investments for their renovation. The purpose of the paper is the development of optimal management structure of freight cars in conditions of railway transport reformation. Methodology. The theoretical and methodological basis for research is a systematic analysis of problems of providing the competitiveness of the transport industry in the field of freight railway transportations, theoretical principles of economics in the production efficiency, market economics transformation and management of the national economy. Findings. The author has developed an improved mechanism for freight traffic management, which differs from the existing one by its adaptation to the conditions of industry being reformed and the organization of management companies. These companies together with the Ukrainian transport and logistics center centralize management of all freight cars of both domestic and foreign operating companies. Originality. Author presents the theoretical generalization and new solution of the scientific problem. It appears in the development of theoretical and methodological approaches to the management structure of the freight cars by operating companies in conditions of railway transport reforming through the management companies organization in Ukraine. The above mentioned companies will combine two types of activity – the commercial one and the cars repair of different property, it will reduce car turnover, stay time of rolling stock in the inoperative park and thereby improve the efficiency of freight transportations. Particularly, they will lease and have the right to dispose universal cars of domestic

  16. Intermodal Logistics Centres and Freight Corridors – Concepts and Trends

    Norbert Wagener

    2017-09-01

    Full Text Available . Background: The development of international freight corridors, as the Trans European Network and new rail and inland shipping corridors in Asia and Africa, require efficient logistics centres along these corridors which serve as intermodal interfaces and provide a variety of different logistics service functions. The definition of the term logistics centre differs between countries and implies different functionalities. Locations are often selected randomly and business models are opportunity driven, especially in highly dynamic and less regulated new emerging economies. In particular Freight Villages as a special form of logistics centres have a high impact on regional development and serve as cargo generator for freight corridors. Consideration of general principles how to establish Freight Villages could improve the effectiveness of these logistics centres along freight corridors. Methods: Based on a literature review a comprehensive and hierarchical definition of logistics centres will be discussed and applied. From experiences in the development of logistics centres in several countries, especially in Germany and Lithuania, challenges and concepts concerning regulatory framework, determination of location and business and financing models are discussed. Results: Concerning the definition of logistics centres a hierarchical definition is applied which comprises different levels of logistics centres depending on the scope of the value adding and the functionality. As general principles for the development of Freight Villages the active role of the state, master planning, objective location finding, participation and co-operation of different stakeholders in the business model and a stepwise scheme for financing are introduced. Major trends for the future development of Freight Villages are the digitalization of supply chains, the application of new intermodal technologies and of innovative telematics systems, solutions for low emission and

  17. Lifting strength in two-person teamwork.

    Lee, Tzu-Hsien

    2016-01-01

    This study examined the effects of lifting range, hand-to-toe distance, and lifting direction on single-person lifting strengths and two-person teamwork lifting strengths. Six healthy males and seven healthy females participated in this study. Two-person teamwork lifting strengths were examined in both strength-matched and strength-unmatched groups. Our results showed that lifting strength significantly decreased with increasing lifting range or hand-to-toe distance. However, lifting strengths were not affected by lifting direction. Teamwork lifting strength did not conform to the law of additivity for both strength-matched and strength-unmatched groups. In general, teamwork lifting strength was dictated by the weaker of the two members, implying that weaker members might be exposed to a higher potential danger in teamwork exertions. To avoid such overexertion in teamwork, members with significantly different strength ability should not be assigned to the same team.

  18. Examining the value of travel time reliability for freight transportation to support freight planning and decision-Making [summary].

    2016-12-01

    As consumers demand greater choice and availability of products, suppliers have responded with more just-in-time delivery and less centralized inventories. Keeping this supply chain working efficiently requires reliable freight transportation. Delays...

  19. Examining the value of travel time reliability for freight transportation to support freight planning and decision-making.

    2016-12-01

    This report presents the findings of a valuation study recently conducted in Florida to quantify the : freight users willingness to pay (WTP) for the improvement of transportation-related attributes, : particularly reliability. A stated preference...

  20. Nordic noir and lifted localities

    Hansen, Kim Toft

    What I do here is to draw attention to a particular visual quality of recent Nordic noir and to relate the visuality of TV-drama to what I – with a term borrowed from Roland Robertson – dub lifted localites.......What I do here is to draw attention to a particular visual quality of recent Nordic noir and to relate the visuality of TV-drama to what I – with a term borrowed from Roland Robertson – dub lifted localites....

  1. Null lifts and projective dynamics

    Cariglia, Marco, E-mail: marco@iceb.ufop.br

    2015-11-15

    We describe natural Hamiltonian systems using projective geometry. The null lift procedure endows the tangent bundle with a projective structure where the null Hamiltonian is identified with a projective conic and induces a Weyl geometry. Projective transformations generate a set of known and new dualities between Hamiltonian systems, as for example the phenomenon of coupling-constant metamorphosis. We conclude outlining how this construction can be extended to the quantum case for Eisenhart–Duval lifts.

  2. Lift-and-fill face lift: integrating the fat compartments.

    Rohrich, Rod J; Ghavami, Ashkan; Constantine, Fadi C; Unger, Jacob; Mojallal, Ali

    2014-06-01

    Recent discovery of the numerous fat compartments of the face has improved our ability to more precisely restore facial volume while rejuvenating it through differential superficial musculoaponeurotic system treatment. Incorporation of selective fat compartment volume restoration along with superficial musculoaponeurotic system manipulation allows for improved control in recontouring while addressing one of the key problems in facial aging, namely, volume deflation. This theory was evaluated by assessing the contour changes from simultaneous face "lifting" and "filling" through fat compartment-guided facial fat transfer. A review of 100 face-lift patients was performed. All patients had an individualized component face lift with fat grafting to the nasolabial fold, deep malar, and high/lateral malar fat compartment locations. Photographic analysis using a computer program was conducted on oblique facial views preoperatively and postoperatively, to obtain the most projected malar contour point. Two independent observers visually evaluated the malar prominence and nasolabial fold improvements based on standardized photographs. Nasolabial fold improved by at least one grade in 81 percent and by over one grade in 11 percent. Malar prominence average projection increase was 13.47 percent and the average amount of lift was 12.24 percent. The malar prominence score improved by at least one grade in 62 percent of the patients postoperatively, and 9 percent had a greater than one grade improvement. Twenty-eight percent of the patients had a convex malar prominence postoperatively compared with 6 percent preoperatively. Malar prominence improved by at least one grade in 63 percent and by over one grade in 10 percent. The lift-and-fill face lift merges two key concepts in facial rejuvenation: (1) effective tissue manipulation by means of lifting and tightening in differential vectors according to original facial asymmetry and shape; and (2) selective fat compartment filling

  3. IMPROVEMENT OF FREIGHT TRANSPORTATION PROCESS AND THEIR MANAGEMENT MECHANISM

    L. V. Martsenyuk

    2014-03-01

    Full Text Available Purpose. For Ukraine as for a post-socialist state there is an objective need of reforming on railway transport. In order to meet the requirements of consumers both within the country and outside of it, it is necessary to solve transport problems in time and to introduce new technologies, without lagging behind the developed European states. The purpose of this article is identification of problems in the process of freight transportations and development of ways of their overcoming, formation of the principles of economic efficiency increase for the use of freight cars using the improvement of management mechanism of freight transportations in the conditions of reforming. Methodology. Methods of strategic planning, system approach for research on improvement of the management mechanism of freight transportations, as well as the organizational-administrative method for structure of management construction were used in this research. Findings. Authors have explored the problems arising in the process of transportation of goods and measures, which will increase the efficiency of goods transportation. Advanced mechanism of freight transportation management for its application in the conditions of the railway transport reforming was developed. It is based on management centralization. Originality. The major factors, which slow down process of cargo transportations, are investigated in the article. The principles of management mechanism improvement of freight transportations are stated. They are based on association of commercial and car-repair activity of depots. All this will allow reducing considerably a car turn by decrease in duration of idle times on railway transport, increasing the speed of freight delivery and cutting down a transport component in the price of delivered production. Practical value. The offered measures will improve the efficiency of rolling stock use and increase cargo volumes turnover, promote links of Ukraine with

  4. Urban distribution centers : a means to reducing freight vehicle miles traveled.

    2011-02-01

    The present study examines the model of freight consolidation platforms, and urban distribution centers (UDCs) in particular, as a means to solve the last mile problem of urban freight while reducing vehicle miles traveled and associated environmenta...

  5. The Extended Generalized Cost Concept and its Application in Freight Transport and General Equilibrium Modeling

    Tavasszy, L.; Davydenko, I.; Ruijgrok, K.

    2009-01-01

    The integration of Spatial Equilibrium models and Freight transport network models is important to produce consistent scenarios for future freight transport demand. At various spatial scales, we see the changes in production, trade, logistics networking and transportation, being driven by

  6. Measuring the economic contribution of the freight industry to the Maryland economy.

    2015-05-01

    Economic impacts of freight movement to Marylands economy were estimated by input-output analysis : using the 2010 IMPLAN data. A freight economic output (FECO) index was also developed based on the : historical payroll data and gross domestic pro...

  7. Goods movement study in Illinois : application to freight transportation and logistics.

    2013-03-01

    This report details the results generated by a recently completed nationwide online freight establishment study. : The survey was assembled with the intention of allowing the formulation or enhancement of new or existing : freight-demand microsimulat...

  8. A comparative analysis of several vehicle emission models for road freight transportation

    Demir, E.; Bektas, T.; Laporte, G.

    2011-01-01

    Reducing greenhouse gas emissions in freight transportation requires using appropriate emission models in the planning process. This paper reviews and numerically compares several available freight transportation vehicle emission models and also considers their outputs in relations to field studies.

  9. Work Inside Ocean Freight Containers—Personal Exposure to Off-Gassing Chemicals

    Svedberg, Urban

    2013-01-01

    More than 500 million ocean freight container units are shipped annually between countries and continents. Residual levels of fumigants, as well as naturally occurring off-gassing chemicals emanating from the goods, constitute safety risks, which may affect uniformed workers upon entering the container. The aim of this study was to assess workers’ exposure during stripping of containers and is the first study of its kind. First, an experimental tracer gas method was investigated to determine its usefulness to approximate real exposures from gaseous fumigants and off-gassing volatile organic compounds (VOCs). Nitrous oxide was injected and left to distribute in the closed containers. The distribution of the tracer gas and initial (arrival) concentrations of off-gassing volatiles were measured prior to opening the containers. Second, personal exposure (breathing zone) and work zone air monitoring of both tracer gas and VOCs were carried out during stripping. Adsorbent tubes, bag samples, and direct-readings instruments (photoionization detector and Fourier transform infrared spectrometry) were used. The distribution studies with nitrous oxide, and the high correlation between the former and VOCs (r 2 ~ 0.8) during stripping, showed that the tracer gas method may well be used to approximate real exposures in containers. The average breathing zone and work zone concentrations during stripping of naturally ventilated 40-foot containers were 1–7% of the arrival concentrations; however, peaks up to 70% were seen during opening. Even if average exposures during stripping are significantly lower than arrival concentrations, they may still represent serious violations of occupational exposure limits in high-risk containers. The results from this and previous studies illustrate the need to establish practices for the safe handling of ocean freight containers. Until comprehensive recommendations are in place, personnel that need to enter such containers should, in addition

  10. An Investigation into the Non-bulk Rail Freight Transport in Australia

    Hadi Ghaderi; Stephen Cahoon; Hong-Oanh Nguyen

    2015-01-01

    In the last decade freight transport has gained further momentum in Australia, partly through significant demand growth at both domestic and international levels and partly as the result of Australia's long term need for infrastructure decision making. Amongst the freight task, non-bulk freight is the fastest growing freight task in Australia and is forecast to grow much faster than the rate of population growth and the average national GDP growth. However, rail's share in the non-bulk market...

  11. The Migration of Railway Freight Transport from Command Economy to Market Economy: The Case of China.

    Xie, R.; Chen, H.; Nash, C.

    2000-01-01

    In recent years, the Chinese railways freight transport has been facing great challenges from the transport market and economic expansion. The total freight volume has been increasing. But the market share of railway freight has decreased greatly, especially since the beginning of migration from command economy to market economy. In this paper, we make some insight into five aspects. Firstly, the historical and current situation of freight transport in China and the relationship between econo...

  12. DETERMINATION OF THE ISSUE CONCERNING THE LIFT RESISTANCE FACTOR OF LIGHTWEIGHT CAR

    A. O. Shvets

    2015-10-01

    Full Text Available Purpose. The analytical study of the connection between the longitudinal force, acting on the light-weight car, lateral and vertical forces of interaction in the contact zone «wheel – rail» with the lift resistance factor value is to provide a simple relationships between them. Methodology. Research was conducted by the method of mathematical modeling of loading the freight car when driving at different speeds on straight and curved sections of a track. Findings. Even in the absence of «lift» accordingly the classical train stability theory, as the hinge-rod system, the presence of the longitudinal compressive forces may become a factor provoking cars derailment. The main reason of wheel climbing on rails is the combination of processes of dynamic interaction between the hunting vehicle and the track with simultaneous action of longitudinal compressive forces, and not the destabilization of train as a hingedrod system. To assess the impact of the longitudinal forces value on the lift resistance factor there are presented the calculation results for the empty gondola car motion, model No. 12-532, on 250 m radius curve with 150 mm rise and cross starting of car underframe relating to the track axis in 50 mm guiding section. The calculations were made in such a curve excluding the inertial forces from outstanding acceleration and taking into account the unbalanced acceleration with the permissible speed of 65 km/h. Originality. This study provides the technique of determining the lift resistance factor by longitudinal forces, which is somewhat different from the standard one, as well as evaluates impact of rolling stock speed on this factor. Practical value. The authors clarify the current method of determining the lift resistance factor by longitudinal forces and assess the impact of rolling stock speed on the value of this factor. From these studies one can conclude that because of cars hunting their lift is possible even when the train as

  13. Lift production through asymmetric flapping

    Jalikop, Shreyas; Sreenivas, K. R.

    2009-11-01

    At present, there is a strong interest in developing Micro Air Vehicles (MAV) for applications like disaster management and aerial surveys. At these small length scales, the flight of insects and small birds suggests that unsteady aerodynamics of flapping wings can offer many advantages over fixed wing flight, such as hovering-flight, high maneuverability and high lift at large angles of attack. Various lift generating mechanims such as delayed stall, wake capture and wing rotation contribute towards our understanding of insect flight. We address the effect of asymmetric flapping of wings on lift production. By visualising the flow around a pair of rectangular wings flapping in a water tank and numerically computing the flow using a discrete vortex method, we demonstrate that net lift can be produced by introducing an asymmetry in the upstroke-to-downstroke velocity profile of the flapping wings. The competition between generation of upstroke and downstroke tip vortices appears to hold the key to understanding this lift generation mechanism.

  14. Normalized lift: an energy interpretation of the lift coefficient simplifies comparisons of the lifting ability of rotating and flapping surfaces.

    Phillip Burgers

    Full Text Available For a century, researchers have used the standard lift coefficient C(L to evaluate the lift, L, generated by fixed wings over an area S against dynamic pressure, ½ρv(2, where v is the effective velocity of the wing. Because the lift coefficient was developed initially for fixed wings in steady flow, its application to other lifting systems requires either simplifying assumptions or complex adjustments as is the case for flapping wings and rotating cylinders.This paper interprets the standard lift coefficient of a fixed wing slightly differently, as the work exerted by the wing on the surrounding flow field (L/ρ·S, compared against the total kinetic energy required for generating said lift, ½v(2. This reinterpreted coefficient, the normalized lift, is derived from the work-energy theorem and compares the lifting capabilities of dissimilar lift systems on a similar energy footing. The normalized lift is the same as the standard lift coefficient for fixed wings, but differs for wings with more complex motions; it also accounts for such complex motions explicitly and without complex modifications or adjustments. We compare the normalized lift with the previously-reported values of lift coefficient for a rotating cylinder in Magnus effect, a bat during hovering and forward flight, and a hovering dipteran.The maximum standard lift coefficient for a fixed wing without flaps in steady flow is around 1.5, yet for a rotating cylinder it may exceed 9.0, a value that implies that a rotating cylinder generates nearly 6 times the maximum lift of a wing. The maximum normalized lift for a rotating cylinder is 1.5. We suggest that the normalized lift can be used to evaluate propellers, rotors, flapping wings of animals and micro air vehicles, and underwater thrust-generating fins in the same way the lift coefficient is currently used to evaluate fixed wings.

  15. Normalized Lift: An Energy Interpretation of the Lift Coefficient Simplifies Comparisons of the Lifting Ability of Rotating and Flapping Surfaces

    Burgers, Phillip; Alexander, David E.

    2012-01-01

    For a century, researchers have used the standard lift coefficient CL to evaluate the lift, L, generated by fixed wings over an area S against dynamic pressure, ½ρv 2, where v is the effective velocity of the wing. Because the lift coefficient was developed initially for fixed wings in steady flow, its application to other lifting systems requires either simplifying assumptions or complex adjustments as is the case for flapping wings and rotating cylinders. This paper interprets the standard lift coefficient of a fixed wing slightly differently, as the work exerted by the wing on the surrounding flow field (L/ρ·S), compared against the total kinetic energy required for generating said lift, ½v2. This reinterpreted coefficient, the normalized lift, is derived from the work-energy theorem and compares the lifting capabilities of dissimilar lift systems on a similar energy footing. The normalized lift is the same as the standard lift coefficient for fixed wings, but differs for wings with more complex motions; it also accounts for such complex motions explicitly and without complex modifications or adjustments. We compare the normalized lift with the previously-reported values of lift coefficient for a rotating cylinder in Magnus effect, a bat during hovering and forward flight, and a hovering dipteran. The maximum standard lift coefficient for a fixed wing without flaps in steady flow is around 1.5, yet for a rotating cylinder it may exceed 9.0, a value that implies that a rotating cylinder generates nearly 6 times the maximum lift of a wing. The maximum normalized lift for a rotating cylinder is 1.5. We suggest that the normalized lift can be used to evaluate propellers, rotors, flapping wings of animals and micro air vehicles, and underwater thrust-generating fins in the same way the lift coefficient is currently used to evaluate fixed wings. PMID:22629326

  16. Normalized lift: an energy interpretation of the lift coefficient simplifies comparisons of the lifting ability of rotating and flapping surfaces.

    Burgers, Phillip; Alexander, David E

    2012-01-01

    For a century, researchers have used the standard lift coefficient C(L) to evaluate the lift, L, generated by fixed wings over an area S against dynamic pressure, ½ρv(2), where v is the effective velocity of the wing. Because the lift coefficient was developed initially for fixed wings in steady flow, its application to other lifting systems requires either simplifying assumptions or complex adjustments as is the case for flapping wings and rotating cylinders.This paper interprets the standard lift coefficient of a fixed wing slightly differently, as the work exerted by the wing on the surrounding flow field (L/ρ·S), compared against the total kinetic energy required for generating said lift, ½v(2). This reinterpreted coefficient, the normalized lift, is derived from the work-energy theorem and compares the lifting capabilities of dissimilar lift systems on a similar energy footing. The normalized lift is the same as the standard lift coefficient for fixed wings, but differs for wings with more complex motions; it also accounts for such complex motions explicitly and without complex modifications or adjustments. We compare the normalized lift with the previously-reported values of lift coefficient for a rotating cylinder in Magnus effect, a bat during hovering and forward flight, and a hovering dipteran.The maximum standard lift coefficient for a fixed wing without flaps in steady flow is around 1.5, yet for a rotating cylinder it may exceed 9.0, a value that implies that a rotating cylinder generates nearly 6 times the maximum lift of a wing. The maximum normalized lift for a rotating cylinder is 1.5. We suggest that the normalized lift can be used to evaluate propellers, rotors, flapping wings of animals and micro air vehicles, and underwater thrust-generating fins in the same way the lift coefficient is currently used to evaluate fixed wings.

  17. Decomposing road freight energy use in the United Kingdom

    Sorrell, Steve; Lehtonen, Markku; Stapleton, Lee; Pujol, Javier; Champion, Toby

    2009-01-01

    Applying the techniques of decomposition analysis we estimate the relative contribution of ten variables (termed 'key ratios') plus GDP to the change in UK road freight energy use over the period 1989-2004 inclusive. The results are best interpreted as an estimate of the percentage growth in energy consumption that would have resulted from the change in the relevant factor (e.g. length of haul) had the other factors remained unchanged. The results demonstrate that the main factor contributing to the decoupling of UK road freight energy consumption from GDP was the decline in the value of domestically manufactured goods relative to GDP. Over the period 1989-2004 this largely offset the effect of increases in GDP on road freight energy consumption. While the decline in domestic manufacturing was to some extent displaced by increases in imports, the net effect of these supply factors, together with shifts in the commodity mix, has been to reduce UK road freight energy consumption by 30.1%. The net effect on global carbon dioxide (CO 2 ) emissions is likely to be somewhat less beneficial, since many freight movements associated with the manufacture of imported goods have simply been displaced to other countries.

  18. Backcasting sustainable freight transport systems for Europe in 2050

    Mattila, Tuomas; Antikainen, Riina

    2011-01-01

    European freight transport emissions and fuel consumption are projected to increase. This study focuses on long distance freight transport (LDFT) and explores possible sustainable futures through quantitative modeling. The evaluation was part of European foresight process between researchers, policy makers and freight companies (FREIGHTVISION). Greenhouse gas (GHG) emissions and energy demand of road, rail and inland waterways were estimated for an EU-27 in 2005. Development was extrapolated to 2050 based on technology and freight performance forecasts. Stakeholders found the forecasted GHG emissions and fossil fuel share unsustainable, so alternative futures were developed with backcasting. The developed emission model was run with random parameter combinations to screen a set of sustainable futures, with an 80% reduction of GHG emissions and fossil fuel share. Freight transport performance was not controlled in the backcasts, but several sustainable futures were found if significant changes in transport efficiency and energy mix are implemented. In spite of agreeing on the importance of reducing emissions, stakeholders had difficulties in choosing a preferred technological future. Simple models were found to be an effective tool for communicating the influence of various measures. Further research is recommended to screen preferable technological roadmaps from the broad range of available futures. - Research highlights: → Sustainable transport systems were explored with modeling and stakeholder workshops. → Backcasting identified technological options for reducing greenhouse gas emissions by 80%. → Improving road vehicle efficiency, engine efficiency and fuel mix showed the greatest potential.

  19. 49 CFR 1242.23 - Shop buildings-freight cars (account XX-13-25).

    2010-10-01

    ... 49 Transportation 9 2010-10-01 2010-10-01 false Shop buildings-freight cars (account XX-13-25). 1242.23 Section 1242.23 Transportation Other Regulations Relating to Transportation (Continued) SURFACE... Structures § 1242.23 Shop buildings—freight cars (account XX-13-25). These accounts pertain solely to freight...

  20. TCA High Lift Preliminary Assessment

    Wyatt, G. H.; Polito, R. C.; Yeh, D. T.; Elzey, M. E.; Tran, J. T.; Meredith, Paul T.

    1999-01-01

    This paper presents a TCA (Technology Concept Airplane) High lift Preliminary Assessment. The topics discussed are: 1) Model Description; 2) Data Repeatability; 3) Effect of Inboard L.E. (Leading Edge) Flap Span; 4) Comparison of 14'x22' TCA-1 With NTF (National Transonic Facility) Modified Ref. H; 5) Comparison of 14'x22' and NTF Ref. H Results; 6) Effect of Outboard Sealed Slat on TCA; 7) TCA Full Scale Build-ups; 8) Full Scale L/D Comparisons; 9) TCA Full Scale; and 10) Touchdown Lift Curves. This paper is in viewgraph form.

  1. Endoscopic brow lifts uber alles.

    Patel, Bhupendra C K

    2006-12-01

    Innumerable approaches to the ptotic brow and forehead have been described in the past. Over the last twenty-five years, we have used all these techniques in cosmetic and reconstructive patients. We have used the endoscopic brow lift technique since 1995. While no one technique is applicable to all patients, the endoscopic brow lift, with appropriate modifications for individual patients, can be used effectively for most patients with brow ptosis. We present the nuances of this technique and show several different fixation methods we have found useful.

  2. New F-theory lifts

    Collinucci, Andres

    2009-01-01

    In this note, a procedure is developed to explicitly construct non-trivial F-theory lifts of perturbative IIB orientifold models on Calabi-Yau complete intersections in toric varieties. This procedure works on Calabi-Yau orientifolds where the involution coordinate can have arbitrary projective weight, as opposed to the well-known hypersurface cases where it has half the weight of the equation defining the CY threefold. This opens up the possibility of lifting more general setups, such as models that have O3-planes.

  3. A Literature Review On Multimodal Freight Transportation Planning Under Disruptions

    Rosyida, E. E.; Santosa, B.; Pujawan, I. N.

    2018-04-01

    This paper reviews publication that focuses on multimodal freight transportation planning under disruptions. In this paper, disruptions are specified by the level of the disruptions occurs and the scope of its effect. This becomes an important distinction since the cause and effect that may occur at different levels. The failure to make this distinction has implications for how we understand and manage. The reviewed papers include those that develop framework, model, and technical procedure for freight transportation. Finally, we provide an outlook of future research directions on the domain of transportation planning.

  4. Inbound freight: an untapped resource for saving money.

    Kuehn, Kurt

    2007-12-01

    With all the responsibilities placed on materials managers, it is not surprising that some processes such as shipping are overlooked when it comes to cutting costs. But by taking a closer look at inbound freight costs, materials managers might discover an untapped resource for saving thousands, and in some cases millions, of dollars. Finding out how costs vary among vendors for shipping the same type of item can eliminate unnecessary freight charges. Initially, the process takes time, but the bottom line will be better for it.

  5. Operations Research Approaches to Asset Management in Freight Rail

    Gorman, Michael F.; Harrod, Steven

    2011-01-01

    This article describes operations research methodologies as they apply to asset management in freight rail. We describe state-of-the-art methods for locomotive, crew, railcar, line and yard planning and management. We conclude with emerging areas of research in rail.......This article describes operations research methodologies as they apply to asset management in freight rail. We describe state-of-the-art methods for locomotive, crew, railcar, line and yard planning and management. We conclude with emerging areas of research in rail....

  6. How Do Wings Generate Lift?

    So how do you go about teaching them something new? By mix- ing what they know with .... the viscous terms to the Euler equations increases the order of the ... such a strange result, one can use this pressure distribution and calculate the lift ...

  7. Safe lifting in patients with chronic low back pain : Comparing FCE lifting task and NIOSH lifting guideline

    Kuijer, Wietske; Dijkstra, Pieter U.; Brouwer, Sandra; Reneman, Michiel F.; Groothoff, Johan W.; Geertzen, Jan H. B.

    2006-01-01

    Introduction: Both the floor-to-waist lifting task of the Isernhagen Work Systems Functional Capacity Evaluation (IWS FCE) and recommended weight limit (RWL) of the NIOSH produce safe lifting weights and are used world-wide nowadays. It is unknown whether they produce similar safe lifting weights.

  8. Fatigue test of a fiberglass based composite panel. Increasing the lifetime of freight wagon

    Sobek, M.; Baier, A.; Grabowski, Ł.; Majzner, M.

    2016-08-01

    pneumatic cylinder and a strain gauge sensors was used. A logic controller to control pneumatic valves was used. Tests were carried out for different number of cycles. The paper contains the results and conclusions which will be useful for the actual application of composite panels on the hull of a freight wagon.

  9. Fuel Cell Hydroge Manifold for Lift Trucks

    Hosseinzadeh, Elham

    . Battery driven lift trucks are being used more and more in different companies to reduce their emissions. However, battery driven lift trucks need long time to recharge and may be out of work for a long time. Fuel cell driven lift trucks diminish this problem and are therefore getting more attention...

  10. Electronic intermodal supply chain manifest freight ITS operational test evaluation.

    This report presents the results of a 2.5 year freight Intelligent Transportation System (ITS) evaluation of an air cargo security and logistics system which was deployed at O'Hare and JFK international airports. In September 1999, the Federal Highwa...

  11. A review of recent research on green road freight transportation

    Demir, E.; Bektas, T.; Laporte, G.

    2013-01-01

    Road freight transportation is a major contributor to carbon dioxide equivalent emissions. Reducing these emissions in transportation route planning requires an understanding of vehicle emission models and their inclusion into the existing optimization methods. This paper provides a review of recent

  12. Broad economic benefits of freight transportation infrastructure improvement.

    2012-06-01

    This project strives to introduce a novel way to quantify the broad re-organization benefits associated with an : improvement in the freight infrastructure. Using the approach based on 1) the technique known as Field of Influence, and : 2) RAS adjust...

  13. Challenges and future research needs towards international freight transport modelling

    Meersman, H.; Ehrler, C.C.; Bruckmann, D.; Chen, T.M.; Francke, J.; Hill, P.; Jackson, C.; Klauenberg, J.; Kurowski, M.; Seidel, S.; Vierth, I.

    2016-01-01

    The advanced internationalisation of markets and production processes continuously adds to the complexity of supply chains. At the same time improving the sustainability of the related international freight transport processes and optimising their efficiency is becoming a topic of central relevance.

  14. Intermodel freight terminals: marketing channels and telecommunication networks

    Wiegmans, B.W.; Nijkamp, P.; Masurel, E.

    2001-01-01

    This paper seeks to highlight the importance of modern telecommunications networks in combined transport marketing channels deployed for intermodal terminals. To develop a customer-based and broadly applicable framework for studying combined freight transport in Europe, the use of the marketing

  15. Intermodal freight terminals : marketing channels and transport networks

    Nijkamp, Peter; Wiegmans, Bart

    1999-01-01

    The goal of this paper is to combine the current theory about marketing channels withcombined transport and logistics in order to develop a customer-based and broadly applicable approach to the study of combined freight transport inEurope. Furthermore, this paper seeks to provide an analytical

  16. Why is energy use rising in the freight sector?

    Mintz, M.; Vyas, A.D.

    1991-01-01

    Trends in transportation sector energy use and carbon dioxide emissions are analyzed with an emphasis on three freight modes -- rail, truck, and marine. A recent set of energy use projections is presented and freight mode energy characteristics are discussed. Transportation sector energy use, which nearly doubled between 1960 and 1985, is projected to grow more slowly during the period 1985 endash 2010. Most of the growth is projected to come from non-personal modes (freight and commercial air). Trends in freight mode energy intensities are discussed and a variety of factors behind these trends are analyzed. Rail and marine modes improved their energy intensities during sudden fuel price rises of the 1970s. Though there is room for further technological improvement, long power plant life cycles preclude rapid penetration of new technologies. Thus, energy intensities in these modes are more likely to improve through operational changes. Because of relatively stable fuel prices, the energy share of truck operating expenses is likely to remain low. Coupled with increasing labor costs, this portends only modest improvements in truck energy efficiency over the next two decades

  17. Sustainable practices in urban freight distribution in Bilbao

    Esther Alvarez

    2011-10-01

    Full Text Available Purpose: The objective of the present study is to select some feasible and sustainable logistic practices in order to improve the urban freight distribution in Bilbao city. Design/methodology/approach: After a thorough literature review and a benchmarking, Analytic Hierarchy Process (AHP techniques were used in order to support the decision making processes in order to select the most interesting practices. The criteria used for this selection were based on four factors: (1 improvement of the city freight distribution, (2 implementation possibility, (3 short and medium term applicability and (4 impact on the citizens of Bilbao. Findings: The paper identifies some specific problems that must be faced during the last stage of the logistics chain, where products are usually delivered to final customers in the urban environment. Research limitations/implications: Not all good urban freight distribution practices can be applied universally to all types of towns. Therefore, it is necessary to design some practices specifically to each particular city according to the physical characteristics of the city, the companies’ motivation and the citizens’ habits. Practical implications: All the agents involved in the city freight distribution should be aware of the benefits and problems that their actions cause. Originality/value: This study was carried out from a wide perspective that included researchers, logistics operators and local authorities.

  18. Price Analysis of Railway Freight Transport under Marketing Mechanism

    Shi, Ying; Fang, Xiaoping; Chen, Zhiya

    Regarding the problems in the reform of the railway tariff system and the pricing of the transport, by means of assaying the influence of the price elasticity on the artifice used for price, this article proposed multiple regressive model which analyzed price elasticity quantitatively. This model conclude multi-factors which influences on the price elasticity, such as the averagely railway freight charge, the averagely freight haulage of proximate supersede transportation mode, the GDP per capita in the point of origin, and a series of dummy variable which can reflect the features of some productive and consume demesne. It can calculate the price elasticity of different classes in different domains, and predict the freight traffic volume on different rate levels. It can calculate confidence-level, and evaluate the relevance of each parameter to get rid of irrelevant or little relevant variables. It supplied a good theoretical basis for directing the pricing of transport enterprises in market economic conditions, which is suitable for railway freight, passenger traffic and other transportation manner as well. SPSS (Statistical Package for the Social Science) software was used to calculate and analysis the example. This article realized the calculation by HYFX system(Ministry of Railways fund).

  19. Harmonizing carbon footprint calculation for freight transport chains

    Lewis, A.; Ehrler, V.; Auvinen, H.; Maurer, H.; Davydenko, I.; Burmeister, A.; Seidel, S.; Lischke, A.; Kiel, J.

    2016-01-01

    The European Commission has set as a target a reduction of 60% in transport greenhouse gas emissions by 2050 [EC 11]. This includes freight transport emissions, which present a particular challenge due to the forecast increase in goods transport linked to future economic growth, the current trend of

  20. 78 FR 69520 - Designation of the Primary Freight Network

    2013-11-19

    ... NFN may fit into a multimodal National Freight System; and (5) suggestions for an urban-area route... achieve a contiguous network, and to ensure sufficient connections to Mexico and Canada, requires the... whether the resulting network would meet future public planning and investment needs. Each individual...

  1. The outlook for the freight market in 2002

    Cherrett, D. [H. Clarkson (United Kingdom)

    2001-07-01

    A series of charts (presented as overheads/slides) show the trends in the Capesize (Richards Bay to Rotterdam), Panamax (Richards Bay to Spain/Mediterranean) and Handymax (Newcastle, Australia to Japan) markets from 1992 to date. Factors affecting the freight rates are discussed.

  2. Designing Light Electric Vehicles for urban freight transport

    Hogt, Roeland; Balm, S.H.; Warmerdam, J.M.

    2017-01-01

    The number of light commercial vehicles (LCV) in cities is growing, which puts increasing pressure on the liveability of cities. Small electric freight vehicles and cargo bikes can offer a solution, as they take less space, can manoeuvre easily and free from polluting emissions. Within the two-year

  3. Inventory theory, mode choice and network structure in freight transport

    Combes, F.; Tavasszy, L.A.

    2016-01-01

    In passenger transport, hub-and-spoke networks allow the transportation of small passenger flows with competitive frequencies, in a way that direct line networks cannot. Equivalently, in freight transport, it can be expected that small shipper-receiver flows of high added value commodities transit

  4. A real-time visual inspection method of fastening bolts in freight car operation

    Nan, Guo; Yao, JunEn

    2015-10-01

    A real-time inspection of the key components is necessary for ensuring safe operation of freight car. While traditional inspection depends on the trained human inspectors, which is time-consuming and lower efficient. With the development of machine vision, vision-based inspection methods get more railway on-spot applications. The cross rod end fastening bolts are important components on both sides of the train body that fixing locking plates together with the freight car main structure. In our experiment, we get the images containing fastening bolt components, and accurately locate the locking plate position using a linear Support Vector Machine (SVM) locating model trained with Histograms of Oriented Gradients (HOG) features. Then we extract the straight line segment using the Line Segment Detector (LSD) and encoding them in a range, which constitute a straight line segment dataset. Lastly we determine the locking plate's working state by the linear pattern. The experiment result shows that the localization accurate rate is over 99%, the fault detection rate is over 95%, and the module implementation time is 2f/s. The overall performance can completely meet the practical railway safety assurance application.

  5. Lifting device for drilling rods

    Radzivilovich, L L; Laptev, A G; Lipkovich, V A

    1982-01-01

    A lifter is proposed for drilling rods including a spacer stand with rotating bracket, boom with by-pass rollers, spacing and lifting hydrocylinders with rods and flexible tie mechanism. In order to improve labor productivity by improving maneuverability and to increase the maintenance zone, the lifter is equipped with a hydrocylinder of advance and a cross piece which is installed with the possibility of forward and rotational movement on the stand, and in which by means of the hydrocylinder of advance a boom is attached. Within the indicated boom there is a branch of the flexible tie mechanism with end attached with the possibility of regulation over the length on a rotating bracket, while the rod of the lifting hydrocylinder is connected to the cross piece.

  6. First-Order Twistor Lifts

    Simões BrunoAscenso

    2010-01-01

    Full Text Available The use of twistor methods in the study of Jacobi fields has proved quite fruitful, leading to a series of results. L. Lemaire and J. C. Wood proved several properties of Jacobi fields along harmonic maps from the two-sphere to the complex projective plane and to the three- and four-dimensional spheres, by carefully relating the infinitesimal deformations of the harmonic maps to those of the holomorphic data describing them. In order to advance this programme, we prove a series of relations between infinitesimal properties of the map and those of its twistor lift. Namely, we prove that isotropy and harmonicity to first order of the map correspond to holomorphicity to first order of its lift into the twistor space, relatively to the standard almost complex structures and . This is done by obtaining first-order analogues of classical twistorial constructions.

  7. First-Order Twistor Lifts

    Bruno Ascenso Simões

    2010-01-01

    Full Text Available The use of twistor methods in the study of Jacobi fields has proved quite fruitful, leading to a series of results. L. Lemaire and J. C. Wood proved several properties of Jacobi fields along harmonic maps from the two-sphere to the complex projective plane and to the three- and four-dimensional spheres, by carefully relating the infinitesimal deformations of the harmonic maps to those of the holomorphic data describing them. In order to advance this programme, we prove a series of relations between infinitesimal properties of the map and those of its twistor lift. Namely, we prove that isotropy and harmonicity to first order of the map correspond to holomorphicity to first order of its lift into the twistor space, relatively to the standard almost complex structures J1 and J2. This is done by obtaining first-order analogues of classical twistorial constructions.

  8. ABOUT WAVEFORM OF BRAKING CYLINDER FILLING IN FREIGHT CARS

    L. V. Ursuliak

    2016-04-01

    Full Text Available Purpose. As part of the scientific paper it is necessary to study the waveform impact of the braking cylinders filling on longitudinal train dynamics at different modes of braking. At this one should estimate the level of maximum longitudinal forces and braking distance size in freight cars of various lengths. Methodology. In this paper we attempt to approximate the actual diagram of braking cylinders filling with rational functions of varying degrees. In selection of coefficients in the required functions the highest values of the longitudinal forces and braking distances were used as controlled parameters. They were compared with similar values obtained as a result of experimental rides. The level of longitudinal forces and braking distances amount were evaluated by means of mathematical modeling of train longitudinal vibrations, caused by different braking modes. Findings. At mathematical modeling was assumed that the train consists of 60 uniform four-axle gondola cars, weight of 80 tons, equipped with air dispenser No. 483 included in the median operation, composite braking blocks, and one locomotive VL-8. Train before braking has been pre-stretched. Various types of pneumatic braking (emergency, full service and adjusting braking of the freight train on the horizontal section of the track were simulated. As the calculation results were obtained values of the longitudinal forces, braking distances amounts and reduction time in speed at various braking modes. Originality. Waveform impact of the braking cylinders filling on the longitudinal forces level and braking distances amount in freight trains were investigated. Also the longitudinal loading of freight trains at various pneumatic braking was investigated. Practical value. Obtained results can be used to assess the level of largest longitudinal forces and braking distances in the freight trains of different lengths by mathematical modeling of different braking modes.

  9. The Effect of Lifting Speed on Cumulative and Peak Biomechanical Loading for Symmetric Lifting Tasks

    Kasey O. Greenland

    2013-06-01

    Conclusion: Based on peak values, BCF is highest for fast speeds, but the BCF cumulative loading is highest for slow speeds, with the largest difference between fast and slow lifts. This may imply that a slow lifting speed is at least as hazardous as a fast lifting speed. It is important to consider the duration of lift when determining risks for back and shoulder injuries due to lifting and that peak values alone are likely not sufficient.

  10. Freight transport in 2010 : An exploration of future prices and quality of freight transport in three scenarios

    Runhaar, H.A.C.; Kuipers, Bart; Heijden, R.E.C.M. van der; Melody, W.H.

    2001-01-01

    Background Central to this report is the question what effects government policy can have on rates, transit times, and the reliability of freight transport. In this context, two policy scenarios were examined: one scenario where all social costs that are currently ‘external’, are passed on to

  11. Comparison of Bottomless Lift Nets and Breder Traps for Sampling Salt-Marsh Nekton

    U.S. Environmental Protection Agency — Data set contains: the length of mummichogs (Fundulus heteroclitus) caught on lift nets and Breder traps from May to September 2002; the sizes of green crabs caught...

  12. New heavy-lift system under construction

    2009-07-01

    Heavy-lift availability is at a premium, and the market is eager for alternatives to meet the demand. An alternative heavy-lift solution from SeaMetric - which has two multi-purpose heavy-lift vessels under construction in China - will be available in the first quarter of 2011. The TML system is based on buoyancy and ballast tanks, with four lifting arms mounted on two identical vessels, each vessel measuring 140 x 40 x 10.75 metres. To perform a lift, one TML with lifting arms is positioned on each side of the object. Using seawater pumps, lift force is created by de ballasting the buoyancy tanks and at the same time ballasting the ballast tanks. (AG). tab., ills

  13. FREIGHTVISION. Sustainable European freight transport 2050. Forecast, vision and policy recommendation

    Helmreich, Stephan [AustriaTech Federal Agency for Technological Measurements Ltd., Wien (Austria). Future of Transport; Keller, Hartmut (eds.) [TransVer GmbH-Transport Research and Consultancy, Muenchen (Germany)

    2011-07-01

    This book has been written on the basis of the research done between 2008 and 2010 as part of the European Commission funded FREIGHTVISION project. The ''FREIGHTVISION - Freight Transport 2050 Foresight'' project was funded by the Directorate General MOVE to design a long term vision for European freight transport in 2050 and to identify actions and research to progress appropriate freight transport measures in Europe. The project was carried out as a foresight process encompassing four conferences in which the project team identified and developed with the aid of more than 100 experts an action plan for securing long term freight transport in Europe. The book provides insights into the freight transport visions and Backcasts identified for 2035 and 2050, issues which need to be addressed and measures which were assessed to be part of future paths to assure an economical, environmental, and social freight transport system. (orig.)

  14. Lift enhancement by trapped vortex

    Rossow, Vernon J.

    1992-01-01

    The viewgraphs and discussion of lift enhancement by trapped vortex are provided. Efforts are continuously being made to find simple ways to convert wings of aircraft from an efficient cruise configuration to one that develops the high lift needed during landing and takeoff. The high-lift configurations studied here consist of conventional airfoils with a trapped vortex over the upper surface. The vortex is trapped by one or two vertical fences that serve as barriers to the oncoming stream and as reflection planes for the vortex and the sink that form a separation bubble on top of the airfoil. Since the full three-dimensional unsteady flow problem over the wing of an aircraft is so complicated that it is hard to get an understanding of the principles that govern the vortex trapping process, the analysis is restricted here to the flow field illustrated in the first slide. It is assumed that the flow field between the two end plates approximates a streamwise strip of the flow over a wing. The flow between the endplates and about the airfoil consists of a spanwise vortex located between the suction orifices in the endplates. The spanwise fence or spoiler located near the nose of the airfoil serves to form a separated flow region and a shear layer. The vorticity in the shear layer is concentrated into the vortex by withdrawal of fluid at the suction orifices. As the strength of the vortex increases with time, it eventually dominates the flow in the separated region so that a shear or vertical layer is no longer shed from the tip of the fence. At that point, the vortex strength is fixed and its location is such that all of the velocity contributions at its center sum to zero thereby making it an equilibrium point for the vortex. The results of a theoretical analysis of such an idealized flow field are described.

  15. New approaches to enhancing efficiency of freight railway stations performance within industrial enterprises

    Ваагн Емілійович Парунакян

    2015-03-01

    Full Text Available At present time freight stations operation is complicated by raised dynamics of production and transport processes. Under the given handling capacity, this circumstance affects duration of processing of inbound and internal flow of freight cars. In connection with the abovementioned, the article covers new approaches to the analysis and evaluation of operating characteristics, and designing of railway freight stations within industrial enterprises. These approaches base on the system adaptation of the railway freight stations structural layouts and parameters of technical facilities to new working conditions and production demands. As the criterion of optimization of freight station operation, the index of “transportation work” (freight car-hour was offered. It allows differentiating the elemental flows of freight cars from the overall flow of freight cars at the freight station. It also allows identifying structure, volumes and other parameters of train operation (duration of processing measured in freight car-hours, interpretational and technological idle time denoting the location and the reason for their occurrence. Moreover, the analysis and evaluation of yard operation is offered to be carried out via handling capacity balance, which illustrates the relation between the overall volume of transportation work and the amount of trains handled at the station. This allows establishing additional transportation work and makes it possible to evaluate the real (objective necessity in throughput and handling capacity of station facilities in particular, and the station in general. The operating characteristics that have been examined determine the new methodical approaches to designing of composition-and-structural layouts and parameters of industrial freight stations. As the basis for optimization of the station, the certain method of morphological analysis and synthesis of technical decisions can be accepted, with its modification due to the

  16. Normalized Lift: An Energy Interpretation of the Lift Coefficient Simplifies Comparisons of the Lifting Ability of Rotating and Flapping Surfaces

    Burgers, Phillip; Alexander, David E.

    2012-01-01

    For a century, researchers have used the standard lift coefficient C(L) to evaluate the lift, L, generated by fixed wings over an area S against dynamic pressure, ½ρv(2), where v is the effective velocity of the wing. Because the lift coefficient was developed initially for fixed wings in steady flow, its application to other lifting systems requires either simplifying assumptions or complex adjustments as is the case for flapping wings and rotating cylinders.This paper interprets the standar...

  17. Intensification of Development of Mixed Transportation of Freight in Ukraine through Formation of the Network of Transportation and Logistic Centres and Transportation and Logistic Clusters

    Karpenko Oksana O.

    2013-11-01

    Full Text Available Development of mixed transportation is a prospective direction of development of the transportation system of Ukraine. The article analyses the modern state of development of mixed transportation of freight in Ukraine. The most popular types of combined transportation (refers to multi-modal are container and contrailer trains, which are formed both in Ukraine (Viking and Yaroslav and in other countries, first of all, Belarus (Zubr. One of the reasons of underdevelopment of mixed transportation of freight in Ukraine is absence of a developed network of transportation and logistic centres. The article offers to form a network of transportation and logistic centres in Ukraine as a way of intensification of development of mixed transportations of freight, since they facilitate co-ordination of use of various types of transport and support integrated management of material flows. Transportation and logistic centres should become a start-up complex, around which transportation and logistic clusters would be gradually formed. Transportation and logistic clusters is a new efficient form of network organisation and management of transportation and logistic services and they also ensure growth of efficiency of use of the regional transportation and logistic potential of Ukraine. The article shows prospective supporting transportation and logistic centres and centres of formation of transportation and logistic clusters in the territory of Ukraine. Formation of efficient transportation and logistic system of Ukraine on the basis of a network of transportation and logistic clusters would facilitate entering of Ukraine into the world transportation environment and would allow acceleration of introduction of efficient logistic schemes of freight delivery, in particular, mixed transportation of freight.

  18. Energy efficiency of road freight hauliers - A Nordic comparison

    Liimatainen, Heikki; Nykanen, Lasse; Arvidsson, Niklas

    2014-01-01

    In order to promote policy targets for decarbonising road freight, it is important to gain knowledge on the current energy efficiency practices of hauliers in various countries. This research aimed to provide such knowledge to enable international comparison of the energy efficiency practices...... of road freight hauliers. This was achieved by replicating the Finnish haulier survey in Denmark, Norway and Sweden. Energy efficiency index was developed to provide a simple metric for international comparison. The EEL covers various aspects of energy efficiency to provide a comprehensive outlook...... efficiency actions is rather similar between the four countries. The simple and inexpensive actions, like choosing the lorry according to the cargo and idling avoidance, are most widely implemented. The energy efficiency index developed in this research proved to be a very useful tool for comparing...

  19. Evaluating service quality in the Durban freight transportation industry

    Jeevarathnam P. Govender

    2011-11-01

    Full Text Available This paper evaluates service quality in the Durban freight transportation industry, in which a high degree of competition exists. Previous measurements of service quality in the industry have been casual gauges, rather than a formalised process. This paper makes a contribution by examining the level of service quality, specifically from a tangibles, reliability and responsiveness perspective, thereby identifying service quality gaps which need to be closed, with a view to raising service quality levels in the industry. The SERVQUAL instrument has been used to measure service quality levels administered to 500 of the industry’s active customers, i.e. organisations utilising the services of the freight transportation industry. The targeted respondents were managers responsible for logistics in their organisations. It was found that gaps existed between expectations and perceptions of service quality on 14 of the 15 measured items. Recommendations are made as to how the industry can improve its service quality levels.

  20. A Novel Approach to Forecasting the Bulk Freight Market

    Vangelis Tsioumas

    2017-03-01

    Full Text Available The fast-paced and ever changing freight market compels maritime executives to use sound forecasting tools. This paper aims to enhance the forecasting accuracy of the Baltic Dry Index (BDI by means of developing a multivariate Vector Autoregressive model with exogenous variables (VARX. The proposed model incorporates the Chinese steel production, the dry bulk fleet development and a new composite indicator, the Dry Bulk Economic Climate Index (DBECI. The predictive power of this approach is evaluated against a univariate ARIMA framework, which serves as a benchmark model. The selection of explanatory variables and the model specification are validated using a series of pertinent tests. The results demonstrate that the VARX model outperforms the ARIMA approach, suggesting that the selected independent variables can substantially improve the accuracy of BDI forecasts. The present study is of interest to maritime practitioners, as it provides useful insights into the direction of the freight market and allows them to make informed decisions.

  1. Location Analysis of Freight Distribution Terminal of Jakarta City, Indonesia

    Nahry Nahry

    2016-03-01

    Full Text Available Currently Jakarta has two freight terminals, namely Pulo Gebang and Tanah Merdeka. But, both terminals are just functioned for parking and have not been utilized properly yet, e.g. for consolidation. Goods consolidation, which is usually performed in distribution terminal, may reduce number of freight flow within the city. This paper is aimed to determine the best location of distribution terminal in Jakarta among those two terminals and two additional alternative sites, namely Lodan and Rawa Buaya. It is initialized by the identification of important factors that affect the location selection. It is carried out by Likert analysis through the questionnaires distributed to logistics firms. The best location is determined by applying Overlay Analysis using ArcGIS 9.2. Four grid maps are produced to represent the accessibility, cost, time, and environment factors as the important factors of location. The result shows that the ranking from the best is; Lodan, Tanah Merdeka, Pulo Gebang, and Rawa Buaya.

  2. THE IMPACT OF INFORMATION AND COMMUNICATION TECHNOLOGY ON ROAD FREIGHT TRANSPORTATION

    Ryuichi YOSHIMOTO

    2005-01-01

    Full Text Available Surveying the recent trend toward e-commerce and computerization in the trucking industry, this paper establishes a framework for analyzing the impact of information and communication technology on road freight transportation in terms of commerce, logistics and fleet management, and proposes hypothetical mechanisms of influence. The authors note that the rapid growth of e-commerce and freight fleet management systems make it difficult to arrive at firm, statistics-based conclusions about their impact on road freight transportation, but suggest that more sophisticated government management of transportation demand as well as freight fleet management systems could cancel out the negative impact of e-commerce on road transportation.

  3. Implementation of advanced technologies and other means in dangerous freight transportation

    N. Batarlienė

    2007-12-01

    Full Text Available This article examines types of modern technologies application possibilities in dangerous freight transportation. It is noted that the solution to transport technology problems is based on the improvement of technological supply, the rational usage of informational modeling methodology of the whole transportation process. The aspects of mobile solution of public information and transport are named in this paper. The article presents concrete vehicles and freight tracking on their trips analysis, the principles and methods of their operation. Tracking and localization systems are playing a great role in the transportation of dangerous freight. The newly developed remote identification system for transport facilities and freight are presented.

  4. South Africa’s freight rail reform: A demand-driven perspective

    Jan H. Havenga

    2014-11-01

    Full Text Available During the 20th century, freight transport in South Africa was employed to attain politicoeconomic ideals, resulting in the overprotection of rail and overregulation of road transport. Increasing industry pressure, combined with the international deregulation trend, led to deregulation in 1988. Myopia resulted in a rail investment hiatus and exponential growth in high-value, long-distance road transport, causing excessive logistics and externality costs for the country. The aim of this study was to propose a freight rail reform agenda based on, (1 lessons from past freight transport policy efforts and (2 the results of freight transport market segmentation driven by models developed over the past two decades. For the study, freight flows were modelled by disaggregating the national input–output model into 372 origin–destination pairs and 71 commodity groups, followed by distance decay gravitymodelling. Logistics costs were calculated by relating commodity-level freight flows to the costs of fulfilling associated logistical functions. The standard management approach of founding strategy development on market-driven segmentation provides a neutral input to steer rail reform discussions in South Africa. Market segmentation points to a dualistic rail reform agenda, enabling both a profit-driven core and a development-driven branch line network. Freight flow insights are steering the policy reform debate towards long-term freight strategy development and optimal freight logistics network design.

  5. Transportation Energy Futures: Freight Transportation Modal Shares: Scenarios for a Low-Carbon Future

    Brogan, J. J. [Cambridge Systematics Inc., Cambridge, MA (United States); Aeppli, A. E. [Cambridge Systematics Inc., Cambridge, MA (United States); Brown, D. F. [Cambridge Systematics Inc., Cambridge, MA (United States); Fischer, M. J. [Cambridge Systematics Inc., Cambridge, MA (United States); Grenzeback, L. R. [Cambridge Systematics Inc., Cambridge, MA (United States); McKenzie, E. [Cambridge Systematics Inc., Cambridge, MA (United States); Vimmerstedt, L. [Cambridge Systematics Inc., Cambridge, MA (United States); Vyas, A. D. [Cambridge Systematics Inc., Cambridge, MA (United States); Witzke, E. [Cambridge Systematics Inc., Cambridge, MA (United States)

    2013-03-01

    Freight transportation modes—truck, rail, water, air, and pipeline—each serve a distinct share of the freight transportation market. A variety of factors influence the modes chosen by shippers, carriers, and others involved in freight supply chains. Analytical methods can be used to project future modal shares, and federal policy actions could influence future freight mode choices. This report considers how these topics have been addressed in existing literature and offers insights on federal policy decisions with the potential to prompt mode choices that reduce energy use and greenhouse gas emissions.

  6. Station Stopping of Freight Trains with Pneumatic Braking

    Yun Bai; Baohua Mao; Tinkin Ho; Yu Feng; Shaokuan Chen

    2014-01-01

    In Chinese mainline railway, freight trains need to stop within passenger stations at times because of the delayed passenger trains. Without any decision-support system, it is very difficult for drivers to stop trains within stations with consistency in one braking action. The reasons are that braking performance of train changes with the conditions of braking equipment and the drivers’ subjective evaluations of track profiles and braking distance are vague and imprecise. This paper presents ...

  7. Methodology for Mode Selection in Corridor Analysis of Freight Transportation

    Kanafani, Adib

    1984-01-01

    The purpose of tins report is to outline a methodology for the analysis of mode selection in freight transportation. This methodology is intended to partake of transportation corridor analysts, a component of demand analysis that is part of a national transportation process. The methodological framework presented here provides a basis on which specific models and calculation procedures might be developed. It also provides a basis for the development of a data management system suitable for co...

  8. Air Freight Service Development Plan : Case: CMA CGM Logistics Vietnam

    Nguyen, Giang

    2014-01-01

    Being one of the fastest-growing nations in the world, Vietnam is trading across the border actively and at the same time attracting multiple foreign investments. Import and export activities are occurring vigorously which leads to a huge potential for international transportation sectors, particularly for aviation industry. Hence, the ultimate goal of this thesis is to establish a development plan of air freight service for the case company – CMA CGM Logistics Vietnam (CCLOG VN). The stu...

  9. Sustainable practices in urban freight distribution in Bilbao

    Esther Alvarez; Alberto de la Calle

    2011-01-01

    Purpose: The objective of the present study is to select some feasible and sustainable logistic practices in order to improve the urban freight distribution in Bilbao city. Design/methodology/approach: After a thorough literature review and a benchmarking, Analytic Hierarchy Process (AHP) techniques were used in order to support the decision making processes in order to select the most interesting practices. The criteria used for this selection were based on four factors: (1) improvement of t...

  10. Why does the energy intensity of freight transport rise?

    Scheele, D [Scientific Council for Government Policy (Netherlands)

    1996-12-01

    In advanced economies it is normal to observe declining energy intensities. Both improvements in conversion efficiency and in organisational efficiency of energy use cause energy demand to grow at a slower pace than the economy. In this context it is somewhat particular that in the vital sector of freight transport the energy intensity does not decline, but instead increases. The energy demand of this sector only takes a small share of the total energy demand. According to the World Energy Council the transport sector takes 30 percent of world energy demand and freight transport again takes 30 percent of the transport sector share, maritime transport excluded. Despite this small share some explanation is needed why the increase in energy demand form the volume growth of freight demand is not at least partly countered by a decline in the energy intensity. The purpose of this paper is to review some of the explanations that are given in the literature and to support these explanations with empirical evidence on the case of the Netherlands. (EG)

  11. Profile parameters of wheelset detection for high speed freight train

    Yang, Kai; Ma, Li; Gao, Xiaorong; Wang, Li

    2012-04-01

    Because of freight train, in China, transports goods on railway freight line throughout the country, it does not depart from or return to engine shed during a long phase, thus we cannot monitor the quality of wheel set effectively. This paper provides a system which uses leaser and high speed camera, applies no-contact light section technology to get precise wheel set profile parameters. The paper employs clamping-track method to avoid complex railway ballast modification project. And detailed descript an improved image-tracking algorithm to extract central line from profile curve. For getting one pixel width and continuous line of the profile curve, uses local gray maximum points as direction control points to direct tracking direction. The results based on practical experiment show the system adapted to detection environment of high speed and high vibration, and it can effectively detect the wheelset geometric parameters with high accuracy. The system fills the gaps in wheel set detection for freight train in main line and has an enlightening function on monitoring the quality of wheel set.

  12. Study on process design of partially-balanced, hydraulically lifting vertical ship lift

    Xin, Shen; Xiaofeng, Xu; Lu, Zhang; Bing, Zhu; Fei, Li

    2017-11-01

    The hub ship lift in Panjin is the first navigation structure in China for the link between the inland and open seas, which adopts a novel partially-balanced, hydraulically lifting ship lift; it can meet such requirements as fast and sharp water level change in open sea, large draft of a yacht, and launching of a ship reception chamber; its balancing weight system can effectively reduce the load of the primary lifting cylinder, and optimize the force distribution of the ship reception chamber. The paper provides an introduction to main equipment, basic principles, main features and system composition of a ship lift. The unique power system and balancing system of the completed ship lift has offered some experience for the construction of the tourism-type ship lifts with a lower lifting height.

  13. Isolated neck-lifting procedure: isolated stork lift.

    Barbarino, Sheila C; Wu, Allan Y; Morrow, David M

    2013-04-01

    Many patients desire cosmetic improvement of neck laxity when consulting with a plastic surgeon about their face. Neck laxity and loss of the cervicomental angle can be due to multiple components of aging such as skin quality/elasticity, loss of platysma muscle tone, and submental fat accumulation. Traditionally, the procedure of choice for patients with an aging lower face and neck is a cervicofacial rhytidectomy. However, occasionally, a patient wishes to have no other facial surgery than an improvement of their excessive skin of the anterior, lateral, and/or posterior neck. In other instances, a patient may present with having had a face/neck-lifting procedure that left objectionable vertical/diagonal lines at the lateral neck. In both these instances, a surgeon should consider an isolated stork lift (ISL) procedure. An ISL procedure avoids and/or corrects problematic vertical/diagonal lateral neck folds by "walking" the excess skin flaps around the posterior inferior occipital hairline bilaterally, bringing the flaps together at the lateral and posterior neck, which sometimes involves a midline posterior dart excision of the dog ear. A patient presenting with excessive skin of the neck (anterior, lateral, and/or posterior) and/or residual vertical/diagonal skin folds is an excellent candidate for the ISL. The ISL procedure was performed on 273 patients over a 2-year period at The Morrow Institute. Patients were included if they had excessive skin of the anterior, lateral, and/or posterior neck and/or diagonal/vertical lateral bands and did not desire a full face-lifting procedure. Patients were excluded from this study if they would not accept having longer hair in order to cover the scar along the posterior inferior occipital hairline or a midline T-flap skin closure scar at the base of the posterior midline neck. Under a combination of local anesthesia and IV sedation, a postauricular face-lift incision was made that was extended in a circumoccipital fashion

  14. Scaling of lifting forces in relation to object size in whole body lifting

    Kingma, I.; van Dieen, J.H.; Toussaint, H.M.

    2005-01-01

    Subjects prepare for a whole body lifting movement by adjusting their posture and scaling their lifting forces to the expected object weight. The expectancy is based on visual and haptic size cues. This study aimed to find out whether lifting force overshoots related to object size cues disappear or

  15. Freight corridor performance measurement system: A framework for South Africa

    Jan H. Havenga

    2016-11-01

    Full Text Available Background: On a national level, South Africa’s freight logistics industry is inefficient. The country ranks 36th out of 40 countries in terms of transport productivity (tonne kilometres as a ratio of gross domestic product, or GDP; the ratio of freight logistics costs to GDP measured 11.1% in 2013, compared to that of developed regions which measures in the order of 9%; and rail tonne-km market share on the two most dense long-distance corridors, namely, GautengDurban and Gauteng-Cape Town, is only 12.8% and 4.4%, respectively, whereas rail is globally acknowledged as a more efficient provider of long-distance freight solutions, given appropriate investments and service commitments. Objectives: A cornerstone of improved national freight logistics performance is the availability of reliable indicators to quantify the efficiency and capacity of the logistics network over the intermediate and long term, thereby enabling an evidence-based policy and investment environment. The objective of this article is to describe the foundation framework (i.e. phase 1 for South Africa’s freight corridor performance measurement system (CPMS. Once populated, the CPMS will be a key generator of indicators to facilitate the systemic management of corridors as a national production factor and thereby contributing to South Africa’s competitiveness. Method: The design of South Africa’s CPMS was informed by desktop research and refined through an extensive stakeholder consultation process. A distinction was made between South Africa’s dedicated bulk corridors and the multi-modal corridors. Results: Facilitating both stakeholder involvement and agreement on key indicators, as well as the eventual development of a system supporting the population, aggregation and dissemination of the CPMS are critical outcomes for the management of corridors as a national production factor. Three overarching corridor indicators were defined, relating to increased throughput

  16. 33 CFR 118.85 - Lights on vertical lift bridges.

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Lights on vertical lift bridges... BRIDGES BRIDGE LIGHTING AND OTHER SIGNALS § 118.85 Lights on vertical lift bridges. (a) Lift span lights. The vertical lift span of every vertical lift bridge shall be lighted so that the center of the...

  17. Complex multiplication and lifting problems

    Chai, Ching-Li; Oort, Frans

    2013-01-01

    Abelian varieties with complex multiplication lie at the origins of class field theory, and they play a central role in the contemporary theory of Shimura varieties. They are special in characteristic 0 and ubiquitous over finite fields. This book explores the relationship between such abelian varieties over finite fields and over arithmetically interesting fields of characteristic 0 via the study of several natural CM lifting problems which had previously been solved only in special cases. In addition to giving complete solutions to such questions, the authors provide numerous examples to illustrate the general theory and present a detailed treatment of many fundamental results and concepts in the arithmetic of abelian varieties, such as the Main Theorem of Complex Multiplication and its generalizations, the finer aspects of Tate's work on abelian varieties over finite fields, and deformation theory. This book provides an ideal illustration of how modern techniques in arithmetic geometry (such as descent the...

  18. Soccer Ball Lift Coefficients via Trajectory Analysis

    Goff, John Eric; Carre, Matt J.

    2010-01-01

    We performed experiments in which a soccer ball was launched from a machine while two high-speed cameras recorded portions of the trajectory. Using the trajectory data and published drag coefficients, we extracted lift coefficients for a soccer ball. We determined lift coefficients for a wide range of spin parameters, including several spin…

  19. Thermally stimulating mechanically-lifted well production

    Richardson, E.A.; Hinson, R.A.

    1984-06-19

    A well which is producing slowly by artificial lift can be economically heated by first inflowing a nitrogen-generating solution, to form a pool of reacting liquid near the uppermost opening into the reservoir, then inflowing more solution while artificially-lifting liquid from near the lowermost opening into the reservoir at a rate substantially equalling the inflow rate.

  20. 49 CFR 385.14 - Motor carriers, brokers, and freight forwarders delinquent in paying civil penalties: prohibition...

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false Motor carriers, brokers, and freight forwarders....14 Motor carriers, brokers, and freight forwarders delinquent in paying civil penalties: prohibition... commerce under 49 CFR 386.83. (b) A broker, freight forwarder, or for-hire motor carrier that has failed to...

  1. Analysis of the flexible receiver lifting yoke and blast shield assembly. Tank 241SY101

    Huang, F.H.

    1995-01-01

    The analysis of the lifting yoke and blast shield assembly considers the bending stress, weld strength, and resistance of the lug hole to tear out. The bending stress of the lifting lugs is evaluated to ensure that they meet the requirements of the American Institute for Steel Construction (AISC 1989). Also considered in the calculations is the capability of the thick lugs to withstand the weight of the pump together with that of the container and strongback during rotation to the horizontal position

  2. Lift conference | 5-7 February

    2014-01-01

    Since 2006, Lift Events explore the business and social implications of new technologies through the organisation of international event series and open innovation programs in Europe, Asia and America. The next conference will be held on 5-7 February in Geneva.   (Image: © Lift Conference) The Lift Conference is one of the leading conferences on innovation in Europe and a key annual meeting for individuals and organizations wishing to understand and anticipate trends and innovation. Held every year in February in Geneva (5-7 February 2014), the Lift Conference is a three-day event consisting of talks, interactive workshops, exhibitions, and discussions bringing together over 1’000 participants from all society’s sectors and industries in a dynamic and informal environment with the aim to learn, connect, share and leverage innovation opportunities.   Extraordinary speakers will take to the stage at Lift14: Porter Erisman, former VP of Alibaba.com turned...

  3. Lambda-Lifting in Quadratic Time

    Danvy, Olivier; Schultz, Ulrik Pagh

    2002-01-01

    Lambda-lifting is a program transformation that is used in compilers, partial evaluators, and program transformers. In this article, we show how to reduce its complexity from cubic time to quadratic time, and we present a flow-sensitive lambda-lifter that also works in quadratic time. Lambda-lifting...... that yields the cubic factor in the traditional formulation of lambda-lifting, which is due to Johnsson. This search is carried out by computing a transitive closure. To reduce the complexity of lambda-lifting, we partition the call graph of the source program into strongly connected components, based...... of lambda-lifting from O(n^3) to O(n^2) . where n is the size of the program. Since a lambda-lifter can output programs of size O(n^2), our algorithm is asympotically optimal....

  4. Lambda-Lifting in Quadratic Time

    Danvy, Olivier; Schultz, Ulrik Pagh

    2003-01-01

    Lambda-lifting is a program transformation that is used in compilers, partial evaluators, and program transformers. In this article, we show how to reduce its complexity from cubic time to quadratic time, and we present a flow-sensitive lambda-lifter that also works in quadratic time. Lambda-lifting...... that yields the cubic factor in the traditional formulation of lambda-lifting, which is due to Johnsson. This search is carried out by computing a transitive closure. To reduce the complexity of lambda-lifting, we partition the call graph of the source program into strongly connected components, based...... of lambda-lifting from O(n^3) to O(n^2) . where n is the size of the program. Since a lambda-lifter can output programs of size O(n^2), our algorithm is asympotically optimal....

  5. Occupational lifting and pelvic pain during pregnancy:

    Larsen, Pernille Stemann; Strandberg-Larsen, Katrine; Juhl, Mette

    2013-01-01

    OBJECTIVES: Pelvic pain during pregnancy is a common ailment, and the disease is a major cause of sickness absence during pregnancy. It is plausible that occupational lifting may be a risk factor of pelvic pain during pregnancy, but no previous studies have examined this specific exposure. The aim...... of this study was to examine the association between occupational lifting and pelvic pain during pregnancy. METHODS: The study comprised 50 143 pregnant women, enrolled in the Danish National Birth Cohort in the period from 1996-2002. During pregnancy, the women provided information on occupational lifting...... (weight load and daily frequency), and six months post partum on pelvic pain. Adjusted odds ratios for pelvic pain during pregnancy according to occupational lifting were calculated by logistic regression. RESULTS: Any self-reported occupational lifting (>1 time/day and loads weighing >10 kg...

  6. Lambda-Lifting in Quadratic Time

    Danvy, Olivier; Schultz, Ulrik Pagh

    2004-01-01

    Lambda-lifting is a program transformation that is used in compilers, partial evaluators, and program transformers. In this article, we show how to reduce its complexity from cubic time to quadratic time, and we present a flow-sensitive lambda-lifter that also works in quadratic time. Lambda-lifting...... that yields the cubic factor in the traditional formulation of lambda-lifting, which is due to Johnsson. This search is carried out by computing a transitive closure. To reduce the complexity of lambda-lifting, we partition the call graph of the source program into strongly connected components, based...... of lambda-lifting from O(n^3) to O(n^2) . where n is the size of the program. Since a lambda-lifter can output programs of size O(n^2), our algorithm is asympotically optimal....

  7. Zero emission city logistics: current practices in freight electromobility and feasibility in the near future

    Quak, H.J.; Nesterova, N.N.; Rooijen, T. van; Deng, Y.

    2016-01-01

    This paper examines the feasibility of using electric powered vehicles in urban freight transport from a carrier’s perspective, including their attitudes towards electric freight vehicles (EFVs) and all relevant elements affecting this business case, such as: technological features, existing

  8. A cointegration approach to forecasting freight rates in the dry bulk shipping sector

    Ph.H.B.F. Franses (Philip Hans); A.W. Veenstra (Albert)

    1997-01-01

    textabstractIn this paper, a vector autoregressive model is developed for a sample of ocean dry bulk freight rates. Although the series of freight rates are themselves found to be non-stationary, thus precluding the use of many modelling methodologies, evidence provided by cointegration tests points

  9. 19 CFR 351.515 - Internal transport and freight charges for export shipments.

    2010-04-01

    ... shipments. 351.515 Section 351.515 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE... Internal transport and freight charges for export shipments. (a) Benefit—(1) In general. In the case of internal transport and freight charges on export shipments, a benefit exists to the extent that the charges...

  10. 49 CFR 231.31 - Drawbars for freight cars; standard height.

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Drawbars for freight cars; standard height. 231.31... cars; standard height. (a) Except on cars specified in paragraph (b) of this section— (1) On standard gage (561/2-inch gage) railroads, the maximum height of drawbars for freight cars (measured...

  11. Assessment of multimodal freight bottlenecks and alleviation strategies for upper Midwest region.

    2010-05-01

    The freight that passes through the Mississippi Valley Region is high volume and has a substantial impact on the economy of the : region. According to the BTS-sponsored Commodity Flow Survey, trucks carried almost 2.5 billion tons of freight across t...

  12. Incorporating Logistics in Freight Transport Demand Models: State-of-the-Art and Research Opportunities

    Tavasszy, L.A.; Ruijgrok, K.; Davydenko, I.

    2012-01-01

    Freight transport demand is a demand derived from all the activities needed to move goods between locations of production to locations of consumption, including trade, logistics and transportation. A good representation of logistics in freight transport demand models allows us to predict the effects

  13. Direct lifts of coupled cell networks

    Dias, A. P. S.; Moreira, C. S.

    2018-04-01

    In networks of dynamical systems, there are spaces defined in terms of equalities of cell coordinates which are flow-invariant under any dynamical system that has a form consistent with the given underlying network structure—the network synchrony subspaces. Given a network and one of its synchrony subspaces, any system with a form consistent with the network, restricted to the synchrony subspace, defines a new system which is consistent with a smaller network, called the quotient network of the original network by the synchrony subspace. Moreover, any system associated with the quotient can be interpreted as the restriction to the synchrony subspace of a system associated with the original network. We call the larger network a lift of the smaller network, and a lift can be interpreted as a result of the cellular splitting of the smaller network. In this paper, we address the question of the uniqueness in this lifting process in terms of the networks’ topologies. A lift G of a given network Q is said to be direct when there are no intermediate lifts of Q between them. We provide necessary and sufficient conditions for a lift of a general network to be direct. Our results characterize direct lifts using the subnetworks of all splitting cells of Q and of all split cells of G. We show that G is a direct lift of Q if and only if either the split subnetwork is a direct lift or consists of two copies of the splitting subnetwork. These results are then applied to the class of regular uniform networks and to the special classes of ring networks and acyclic networks. We also illustrate that one of the applications of our results is to the lifting bifurcation problem.

  14. Lifting index of the niosh lifting equation and low back pain

    Eliana Remor Teixeira

    2011-09-01

    Full Text Available The purpose of this study is to assess the relationship of the Lifting Index obtained through the application of the NIOSH Lifting Equation and the incidence of low back pain among forty-eight workers involved in manual lifting tasks. It was applied the equation in eleven tasks and the workers were interviewed. The most unfavorable conditions presented themselves in the lifting destination. The variables that most contributed to the inadequate values of the Lifting Index were: the horizontal location, the lifting frequency and the vertical distance, beyond the high weight of the load. The incidence of low back pain in the last twelve months was 19%, whereas the incidence of work-related low back pain in the same period was 10%. In 72.7% of the tasks evaluated the Composite Lifting Index was more than three, which are considered as high ergonomic risk.

  15. Barriers to and enablers for European rail freight transport for integrated door-to-door logistics service. Part 2: Enablers for multimodal rail freight transport

    Dewan Md Zahurul ISLAM

    2014-12-01

    Full Text Available The objective of this paper is to examine and identify barriers to and enablers for the European rail freight transport services as a transport chain partner along the supply chains in the changing market scenario. The changing market scenario includes, among others, requiring 'door-to-door' rather than 'terminal to terminal' and integrated service, competitive ability to attract non-rail cargo type, changes in the customer requirements (e.g. reliable service and changes in the operational requirements and practices. Using a literature review method, the paper is presented in two parts. The part 1 focuses on the identification of barriers to the European rail freight service by reviewing freight logistics services for global supply chains followed by the current performance of European rail freight transport followed by a discussion on the rail freight market liberalisation in Europe. Then rail freight transport in the Unites States (U.S. is discussed. The research notes that although the background, scope and necessity for reform measures in Europe differ from those of the U.S., some lessons can be learned and the main lesson is that an appropriate reform measure can enhance rail sector competitive ability in Europe. The part 2 of the paper is dedicated to recommend some concrete steps and actions as enablers to remove the barriers identified in the part 1 to develop multimodal rail freight transport. The enablers for multimodal rail freight transport include: •\tEuropean rail freight transport market needs full liberalisation so that incumbent and new entrants can compete freely. •\tThe rail operators need to acquire service (e.g. customer tailored services, door to door service quality offered by road freight operators. •\tThey need to conduct a combination of ‘terminal-to-terminal’ and door-to-door operations, as and when needed; •\tThey must build partnership with freight forwarder or 3PLs to include all types of customers

  16. A proposed regulatory framework for road and rail freight transport in South Africa

    Wessel Pienaar

    2007-09-01

    Full Text Available The increase in the number of freight vehicles on South Africa’s rural road network has received substantial attention. Insinuations persist that long-distance road freight haulage is of a somewhat unsavoury economic nature, and that strict economic re-regulation of the land freight transport is necessary. During the 1970s road transport replaced rail carriage as the dominant form of long-distance freight transport (excluding minerals and ore in South Africa. On long hauls road freight carriers transport certain primary products of an organic nature (such as timber, fish and agricultural produce, some semi-finished goods, many finished goods and most consumer goods. Road freight carriers are continuously gaining market share on long-distance links where rail transport is the more cost efficient mode. The greater value added by road freight carriers in comparison with rail transport through service effectiveness is often more than the cost premium paid for utilising their service rather than making use of rail transport. Throughout history, governments have involved themselves in transport. A diverse range of arguments have been advanced for this involvement in transport, including the following:Control of excessive competition, co-ordination of transport, integration of transport with economic policy, maintenance of safety, security, and order, provision of costly infrastructure, provision of public goods, recovery of the true resource cost of transport inputs, regulation of harmful conduct and externalities, restraint of monopoly power, and social support. A set of nine instruments can be identified that governments apply to influence the performance of the freight transport industry: Legislation, direct supply, fiscal measures, monetary measures, moral appeal and persuasion, policies relating to strategic commodities, procurement policy, provision of information, and research and development. The best prospects for a sound development of

  17. Occupational lifting of heavy loads and preterm birth:

    Runge, Stine Bjerrum; Pedersen, Jacob Krabbe; Svendsen, Susanne Wulff

    2013-01-01

    To examine the association between occupational lifting during pregnancy and preterm birth. The risk of preterm birth was estimated for total burden lifted per day and number of medium and heavy loads lifted per day.......To examine the association between occupational lifting during pregnancy and preterm birth. The risk of preterm birth was estimated for total burden lifted per day and number of medium and heavy loads lifted per day....

  18. Trends in passenger transport and freight energy use in Spain

    Mendiluce, Maria; Schipper, Lee

    2011-01-01

    This paper provides for the first time a complete analysis of recent trends in activity, carbon emissions, modal shares, energy intensities, vehicle use and fuels in the Spanish transport system from 1990 to 2008 and discusses policy options. Passenger and freight activities have increased in Spain and are projected to continue, presenting a challenge for sustainable mobility efforts; emissions have increased, mainly fueled by the rise in activity; modal shares have pulled away from public transport, with a decrease in bus and rail, towards an increase in car and air travel; energy intensities, though initially decreasing, are currently increasing; and fuel use has taken over 37% of Spanish final energy consumption. To target these issues the Spanish government has focused its efforts in targeting energy efficiency through dieselization, which has not led to positive results. More recently policies and measures have been directed towards redirecting modal shares and diversifying the fuel mix. Little has been done to reduce activity besides some anecdotic public awareness campaigns. Activity reduction may be achieved with regulations, restrictions and mobility plans; by increasing high speed rail and rail freight transport; by improving intermodality and tying the Spanish rail network with the EU; and with more urban transport planning at local level. - Highlights: → Complete analysis of recent trends in Spanish transport system from 1990 to 2008. → Passenger and freight activities have driven GHG emissions increase. → Modal shares have pulled away from public transport. → Policy efforts targeted energy efficiency and redirecting modal shares and diversifying the fuel mix. → Little has been done to reduce activity.

  19. Recovery Act--Class 8 Truck Freight Efficiency Improvement Project

    Trucks, Daimler [Daimler Trucks North America Llc, Portland, OR (United States)

    2015-07-26

    Daimler Trucks North America completed a five year, $79.6M project to develop and demonstrate a concept vehicle with at least 50% freight efficiency improvement over a weighted average of several drive cycles relative to a 2009 best-in-class baseline vehicle. DTNA chose a very fuel efficient baseline vehicle, the 2009 Freightliner Cascadia with a DD15 engine, yet successfully demonstrated a 115% freight efficiency improvement. DTNA learned a great deal about the various technologies that were incorporated into Super Truck and those that, through down-selection, were discarded. Some of the technologies competed with each other for efficiency, and notably some of the technologies complemented each other. For example, we found that Super Truck’s improved aerodynamic drag resulted in improved fuel savings from eCoast, relative to a similar vehicle with worse aerodynamic drag. However, some technologies were in direct competition with each other, namely the predictive technologies which use GPS and 3D digital maps to efficiently manage the vehicles kinetic energy through controls and software, versus hybrid which is a much costlier technology that essentially targets the same inefficiency. Furthermore, the benefits of a comprehensive, integrated powertrain/vehicle approach was proven, in which vast improvements in vehicle efficiency (e.g. lower aero drag and driveline losses) enabled engine strategies such as downrating and downspeeding. The joint engine and vehicle developments proved to be a multiplier-effect which resulted in large freight efficiency improvements. Although a large number of technologies made the selection process and were used on the Super Truck demonstrator vehicle, some of the technologies proved not feasible for series production.

  20. Evaluation assessment of Rail Freight Transportation Research and Development Program

    1983-02-01

    This report presents an evaluation assessment of the Canadian Rail Freight Transportation Research and Development (R and D) Program. The assessment was to assist in preparing for an evaluation of the Program and to stimulate a better understanding of the broader issues and problems of evaluating R and D programs. In general, the objectives of the program are aimed at improving rail freight productivity, capacity, safety, cost, and the domestic and foreign competitive position of railway suppliers. This is to be acccomplished by stimulating a stronger industry commitment to R and D and inducing investment in new technology through joint federal-industry funding and participation in rail freight R and D projects. In view of the low funding levels of the Program, it is unlikely that it will have a significant direct impact upon these ultimate objectives. Impacts will likely only be achieved through the Program's ability to stimulate increased industrial R and D and investment in new technology. A model of the Program developed in the report shows that the critical linkages between the activities and objectives of the Program are the leadership or advocacy functions performed by the Program's managers and of the results of projects supported under the Program; and the processes of program planning and project selection. An assessment of the Program's structure indicates that there are no significant issues that would make the evaluation of the Program or its major components inadvisable. Twelve potential evaluation questions and the basic approaches required to address each of them are presented in the report. 5 figs., 10 tabs.

  1. Modeling lift operations with SASmacr Simulation Studio

    Kar, Leow Soo

    2016-10-01

    Lifts or elevators are an essential part of multistorey buildings which provide vertical transportation for its occupants. In large and high-rise apartment buildings, its occupants are permanent, while in buildings, like hospitals or office blocks, the occupants are temporary or users of the buildings. They come in to work or to visit, and thus, the population of such buildings are much higher than those in residential apartments. It is common these days that large office blocks or hospitals have at least 8 to 10 lifts serving its population. In order to optimize the level of service performance, different transportation schemes are devised to control the lift operations. For example, one lift may be assigned to solely service the even floors and another solely for the odd floors, etc. In this paper, a basic lift system is modelled using SAS Simulation Studio to study the effect of factors such as the number of floors, capacity of the lift car, arrival rate and exit rate of passengers at each floor, peak and off peak periods on the system performance. The simulation is applied to a real lift operation in Sunway College's North Building to validate the model.

  2. Application of Artificial Intelligence in Prediction of Road Freight Transportation

    Bogna Mrowczynska; Maria Ciesla; Aleksander Krol; Aleksander Sladkowski

    2017-01-01

    Road freight transport often requires the prediction of volume. Such knowledge is necessary to capture trends in the industry and support decision making by large and small trucking companies. The aim of the presented work is to demonstrate that application of some artificial intelligence methods can improve the accuracy of the forecasts. The first method employed was double exponential smoothing. The modification of this method has been proposed. Not only the parameters but also the initial ...

  3. Operations Research for Freight Train Routing and Scheduling

    Harrod, Steven; Gorman, Michael F.

    2011-01-01

    This article describes the service design activities that plan and implement the rail freight operating plan. Elements of strategic service design include the setting of train frequency, the routing of cars among trains, and the consolidation of cars, called blocking. At the operational level......, trains are dispatched either according to train paths configured in advance, called timetables, or according to priority rules. We describe the North American and European practice along with selected modeling and problem solving methodologies appropriate for each of the operating conditions described...

  4. Wingless Flight: The Lifting Body Story

    Reed, R. Dale; Lister, Darlene (Editor); Huntley, J. D. (Editor)

    1997-01-01

    Wingless Flight tells the story of the most unusual flying machines ever flown, the lifting bodies. It is my story about my friends and colleagues who committed a significant part of their lives in the 1960s and 1970s to prove that the concept was a viable one for use in spacecraft of the future. This story, filled with drama and adventure, is about the twelve-year period from 1963 to 1975 in which eight different lifting-body configurations flew. It is appropriate for me to write the story, since I was the engineer who first presented the idea of flight-testing the concept to others at the NASA Flight Research Center. Over those twelve years, I experienced the story as it unfolded day by day at that remote NASA facility northeast of los Angeles in the bleak Mojave Desert. Benefits from this effort immediately influenced the design and operational concepts of the winged NASA Shuttle Orbiter. However, the full benefits would not be realized until the 1990s when new spacecraft such as the X-33 and X-38 would fully employ the lifting-body concept. A lifting body is basically a wingless vehicle that flies due to the lift generated by the shape of its fuselage. Although both a lifting reentry vehicle and a ballistic capsule had been considered as options during the early stages of NASA's space program, NASA initially opted to go with the capsule. A number of individuals were not content to close the book on the lifting-body concept. Researchers including Alfred Eggers at the NASA Ames Research Center conducted early wind-tunnel experiments, finding that half of a rounded nose-cone shape that was flat on top and rounded on the bottom could generate a lift-to-drag ratio of about 1.5 to 1. Eggers' preliminary design sketch later resembled the basic M2 lifting-body design. At the NASA Langley Research Center, other researchers toyed with their own lifting-body shapes. Meanwhile, some of us aircraft-oriented researchers at the, NASA Flight Research Center at Edwards Air

  5. Transportation Energy Futures Series: Freight Transportation Demand: Energy-Efficient Scenarios for a Low-Carbon Future

    Grenzeback, L. R. [Cambridge Systematics Inc., Cambridge, MA (United States); Brown, A. [Cambridge Systematics Inc., Cambridge, MA (United States); Fischer, M. J. [Cambridge Systematics Inc., Cambridge, MA (United States); Hutson, N. [Cambridge Systematics Inc., Cambridge, MA (United States); Lamm, C. R. [Cambridge Systematics Inc., Cambridge, MA (United States); Pei, Y. L. [Cambridge Systematics Inc., Cambridge, MA (United States); Vimmerstedt, L. [Cambridge Systematics Inc., Cambridge, MA (United States); Vyas, A. D. [Cambridge Systematics Inc., Cambridge, MA (United States); Winebrake, J. J. [Cambridge Systematics Inc., Cambridge, MA (United States)

    2013-03-01

    Freight transportation demand is projected to grow to 27.5 billion tons in 2040, and by extrapolation, to nearly 30.2 billion tons in 2050, requiring ever-greater amounts of energy. This report describes the current and future demand for freight transportation in terms of tons and ton-miles of commodities moved by truck, rail, water, pipeline, and air freight carriers. It outlines the economic, logistics, transportation, and policy and regulatory factors that shape freight demand; the possible trends and 2050 outlook for these factors, and their anticipated effect on freight demand and related energy use. After describing federal policy actions that could influence freight demand, the report then summarizes the available analytical models for forecasting freight demand, and identifies possible areas for future action.

  6. Transportation Energy Futures Series: Freight Transportation Demand: Energy-Efficient Scenarios for a Low-Carbon Future

    Grenzeback, L. R.; Brown, A.; Fischer, M. J.; Hutson, N.; Lamm, C. R.; Pei, Y. L.; Vimmerstedt, L.; Vyas, A. D.; Winebrake, J. J.

    2013-03-01

    Freight transportation demand is projected to grow to 27.5 billion tons in 2040, and to nearly 30.2 billion tons in 2050. This report describes the current and future demand for freight transportation in terms of tons and ton-miles of commodities moved by truck, rail, water, pipeline, and air freight carriers. It outlines the economic, logistics, transportation, and policy and regulatory factors that shape freight demand, the trends and 2050 outlook for these factors, and their anticipated effect on freight demand. After describing federal policy actions that could influence future freight demand, the report then summarizes the capabilities of available analytical models for forecasting freight demand. This is one in a series of reports produced as a result of the Transportation Energy Futures project, a Department of Energy-sponsored multi-agency effort to pinpoint underexplored strategies for reducing GHGs and petroleum dependence related to transportation.

  7. Reinforced orbitotemporal lift: contribution to midface rejuvenation.

    Renó, Waldir Teixeira

    2003-02-01

    The changes in the aging face occur from progressive ptosis of the skin, fat, and muscle, in conjunction with bone absorption and cartilage atrophy. In the orbital region, hollowness and compartmentalization occur. Conventional face lift procedures correct only the skin flaccidity, and superficial musculoaponeurotic system techniques reposition the skin and platysma without repositioning the middle third of the face, creating an artificial jawline. Subperiosteal rhytidectomy disrupts the anatomy of the periorbita, which gives the patient a certain scarecrow aspect. Composite rhytidectomy associated with brow lift and blepharoplasty may offer better results, with improvement in the malar and orbital regions. The reinforced orbitotemporal lift (ROTEL) is a new procedure in a face lift that allows the orbicularis oculi muscle and all the structures connected to it to be elevated and stretched and the orbitotemporal skin to be raised, repositioning these structures and ending orbital compartmentalization. The result is an impressive improvement in the malar-orbitotemporal region, resulting in a natural and youthful appearance.

  8. Lambda-lifting in Quadratic Time

    Danvy, O.; Schultz, U.P.

    2004-01-01

    -lifting transforms a block-structured program into a set of recursive equations, one for each local function in the source program. Each equation carries extra parameters to account for the free variables of the corresponding local function and of all its callees. It is the search for these extra parameters......Lambda-lifting is a program transformation that is used in compilers, partial evaluators, and program transformers. In this article, we show how to reduce its complexity from cubic time to quadratic time, and we present a flow-sensitive lambda-lifter that also works in quadratic time. Lambda...... that yields the cubic factor in the traditional formulation of lambda-lifting, which is due to Johnsson. This search is carried out by computing a transitive closure. To reduce the complexity of lambda-lifting, we partition the call graph of the source program into strongly connected components, based...

  9. Design of heavy lift cargo aircraft

    National Aeronautics and Space Administration — This is the bird of the skies of the future. The heavy lift cargo aircraft which is currently being developed by me has twice the payload capacity of an Antonov...

  10. Lift : Special Needs Transportation in Portland, Oregon

    1978-01-01

    The report covers Portland, Oregon's Special Needs Transportation (SNT) project - the Lift - during its first year of operation. The purposes of this UMTA Service and Methods Demonstration (SMD) is to: (1) test a transit operator's ability to provide...

  11. Spherical projections and liftings in geometric tomography

    Goodey, Paul; Kiderlen, Markus; Weil, Wolfgang

    2011-01-01

    We consider a variety of integral transforms arising in Geometric Tomography. It will be shown that these can be put into a common framework using spherical projection and lifting operators. These operators will be applied to support functions and surface area measures of convex bodies and to rad......We consider a variety of integral transforms arising in Geometric Tomography. It will be shown that these can be put into a common framework using spherical projection and lifting operators. These operators will be applied to support functions and surface area measures of convex bodies...... and to radial functions of star bodies. We then investigate averages of lifted projections and show that they correspond to self-adjoint intertwining operators. We obtain formulas for the eigenvalues of these operators and use them to ascertain circumstances under which tomographic measurements determine...... the original bodies. This approach via mean lifted projections leads us to some unexpected relationships between seemingly disparate geometric constructions....

  12. Lambda-Lifting in Quadratic Time

    Danvy, Olivier; Schultz, Ulrik Pagh

    2002-01-01

    Lambda-lifting is a program transformation used in compilers and in partial evaluators and that operates in cubic time. In this article, we show how to reduce this complexity to quadratic time. Lambda-lifting transforms a block-structured program into a set of recursive equations, one for each...... local function in the source program. Each equation carries extra parameters to account for the free variables of the corresponding local function and of all its callees. It is the search for these extra parameters that yields the cubic factor in the traditional formulation of lambda-lifting, which...... is not needed. We therefore simplify the search for extra parameters by treating each strongly connected component instead of each function as a unit, thereby reducing the time complexity of lambda-lifting from O(n 3 log n)toO(n2 log n), where n is the size of the program. Since a lambda-lifter can output...

  13. A Practical Approach To Lift-Off

    Jones, Susan K.; Chapman, Richard C.; Pavelchek, Edward K.

    1987-08-01

    Lift-off technology provides an alternate metal patterning technology to that of subtractive etching. In this raper, we describe an image reversal process which provides a practical means for reliably producing resist stencils which are required for successful lift-off in a 2.0 μm metal pitch CMOS process, as well as for experimental submicron processing. Experimental data and PROSIM simulations are presented to show the effects of patterning exposure dose, flood exposure dose, develop time, and focus parameters on resist linewidths as well as for control of resist retrograde (undercut) sidewall angles. Deposition and subsequent lift-off of Al/Cu alloys and sandwich metallizations is demonstrated. Because the image reversal process enables pattern definition at the top of the resist film, it is demonstrated that thicker resist films can be used to produce finer resolution of lift-off stencils over topography than would have been expected without resorting to multilayer resist structures.

  14. Wireless sensor node for detection of freight train derailment

    Costa, Andrea; Milani, Damiano; Resta, Ferruccio; Tomasini, Gisella

    2016-04-01

    The target of the research activity presented in this paper is to design, to realize and to test an autonomous sensor node able to measure the accelerations in correspondence of the axle box of a freight train. The final goal of the sensor is to identify the derailment conditions by observing the variations in the spectra of the box accelerations, around the frequencies associated to the wheel revolution and its multiples. The sensor node embeds an accelerometer, a microprocessor, a transmission system, a piezoelectric bimorph energy harvester and an integrated circuit for managing the power distribution to each component of the node. In particular, a mechanical filter to be applied to the node was specifically designed to increment the energy recovered by the harvester and to filter out the high frequency components of the axle-box acceleration, allowing the use of a more sensitive accelerometer. The harvesting system was setup by means of laboratory tests carried out with an electromechanical shaker and the sensor node was finally tested through field tests on freight trains.

  15. Application of Artificial Intelligence in Prediction of Road Freight Transportation

    Bogna Mrowczynska

    2017-08-01

    Full Text Available Road freight transport often requires the prediction of volume. Such knowledge is necessary to capture trends in the industry and support decision making by large and small trucking companies. The aim of the presented work is to demonstrate that application of some artificial intelligence methods can improve the accuracy of the forecasts. The first method employed was double exponential smoothing. The modification of this method has been proposed. Not only the parameters but also the initial values were set in order to minimize the mean absolute percentage error (MAPE using the artificial immune system. This change resulted in a marked improvement in the effects of minimization, and suggests that the variability of the initial value of S2 has an impact on this result. Then, the forecasting Bayesian networks method was applied. The Bayesian network approach is able to take into account not only the historical data concerning the volume of freight, but also the data related to the overall state of the national economy. This significantly improves the quality of forecasting. The application of this approach can also help in predicting the trend changes caused by overall state of economy, which is rather impossible when analysing only the historical data.

  16. Congestion Tolling for Mixed Urban Freight and Passenger Traffic

    Xie Chaoda

    2017-01-01

    Full Text Available This paper investigates the welfare effects of optimal tolling on urban traffic congestion, in a bottleneck model, with mixed freight and passenger users. The users’ marginal utility of time is considered to be varying with time. Under both no-toll equilibrium and socially optimal tolling, the users are found to sort their arrival time according to the increasing rates of marginal utility at the destination. The optimal toll that maximizes social welfare does not change each user's indirect utilit y relative to the no-toll equilibrium, but completely removes the queue, which also removes the barrier of freight carriers to accept congestion pricing by relating their marginal utilities directly to the toll. When the toll is equally rebated, the proposed social optimal tolling is a Pareto improvement relative to the no-toll equilibrium. Those more productive users also suffer more in both no-toll equilibrium and optimal tolling, which indicates that a differentiated redistribution of toll revenues could be an incentive to improve productivity.

  17. Rail freight transportation concerns of developing economies: A Namibian perspective

    Fanny Saruchera

    2017-05-01

    Full Text Available Background: Although rail transport appears to be well established and outperforming other transport modes in Europe and beyond, in the majority of developing economies it was observed that firms and travellers were, on the contrary, shunning from the rail. Despite considerable infrastructural investments in the African rail systems, the sector has been deteriorating over the years. Objectives: This study identifies the freight rail transportation problems faced by African developing economies, focusing on Namibia, and examines the potential actions and factors for minimising such problems, drawing lessons from some of the developed world’s success stories. Method: The objectives of this study are achieved through a survey of Windhoek-based industrial and logistics firms operating in Namibia. Self-administered survey questionnaires were distributed through the aid of trained research assistants. Results: The study’s results show that some of the reasons of shunning rail transport are a matter of attitude, whereas some are related to operational challenges. The study confirms that the transport mode used and ownership of the freight transport services used can affect the degree of satisfaction for the transportation of goods in Namibia. Conclusion: Namibian industrial and logistics firms avoid using rail, owing to its low level of satisfaction obtained from its use. Besides engaging in Public Private Partnerships (PPPs in rail transport operations, the study contends that rail transport should receive attention similar to that given to other transport modes for African economies such as Namibia to overcome the costs associated with the increasing road congestion.

  18. Intermodal Freight Transport on the Right Track? Environmental and economic performances and their trade-off

    Kim, Nam Seok

    2010-01-01

    This dissertation aims to evaluate environmental and economic performances of an intermodal freight transport system and to estimate the trade-off between CO2 emissions, which is presented as an indicator of environmental performance, and freight costs, which indicate the economic performance of the intermodal freight system. The truck-only system is always regarded as the counterpart of the intermodal freight system in this dissertation. To examine the environmental performance of the intermodal freight system, CO2 emissions generated from all the processes in the intermodal chain, such as pre-haulage and post-haulage, long distance haulage, and transshipment, are estimated considering different sources that generate electricity and transmission loss of electricity (Chapters 3 and 4). To examine the economic performance of the system, two approaches are considered: (1) finding the intermodal breakeven distance for which the intermodal system is more competitive than the truck-only system (Chapter 5); (2) examining the economies of scale in the intermodal network and finding the route/system choice that minimizes the total freight transportation costs (Chapter 6). Finally, this dissertation attempts to find the trade-off between CO2 emissions (representing the environmental performance) and freight transportation cost (representing the economic performance) (Chapter 7)

  19. Reforming the road freight transportation system using systems thinking: An investigation of Coronial inquests in Australia.

    Newnam, Sharon; Goode, Natassia; Salmon, Paul; Stevenson, Mark

    2017-04-01

    Road freight transport is considered to be one of the most dangerous industries in Australia, accounting for over 30% of all work fatalities. Whilst system reform (i.e., change to policy and practice) is needed, it is not clear what this reform should be, or what approaches should be used to drive it. This article argues that road freight transportation reform should be underpinned by a systems thinking approach. Efforts to understand crash causation should be focused beyond the driver and identify contributing factors at other levels with the road freight system. Accordingly, we present the findings from a study that examined whether Australian Coronial investigations into road freight crashes reflect support appropriate system reform. Content analysis was used to identify the contributing factors and interrelations implicated in the road freight crashes described in publicly available Australian Coroner's inquest reports from the last 10 years (2004-2014; n=21). The results found evidence to suggest that the Coronial inquests provide some understanding of the complex system of factors influencing road freight transportation crashes in Australia. However, there was a lack of evidence to suggest an understanding of system-based reform based on the identification of reductionist-focused recommendations. It is concluded that researchers and practitioners (ie., government and industry) need to work together to develop prevention efforts focused on system reforms. Systems thinking based data collection and analysis frameworks are urgently required to help develop this understanding in road freight transportation. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. CONTAINER TERMINALS IN EUROPE

    Bart W. WIEGMANS

    2001-01-01

    Full Text Available This paper aims to address the linkage between logistics (in particular, the management of marketing channel flows and transport markets, while also the interaction between these two markets and intermodal container terminals is analysed. The marketing channel theory is used to describe all relevant actors and flows that run through marketing channels, starting with customer needs and ending with customer satisfaction. Porter's theory of competitive advantages is used to review competitive forces in both markets. Finally, a competitor analysis is performed for the logistics and transport market. These theories are applied so as to be able to determine the competitive position of intermodal container terminals with a view to the management of marketing channel flows and the physical transport of freight flows. Hence, the central question of this paper is: Which markets are served by intermodal container terminals and with whom are they competing? At present, neither the maritime container terminals nor the continental container terminals appear to have a significant influence in the logistics service market; they concentrate mainly on the physical movement of containers (transshipment. Furthermore, maritime container terminals and continental container terminals are not dominant players in the transport service market. Our conclusion is that continental terminals are predominantly competing with unimodal road transport, with neighbouring continental terminals and with barge transport companies.

  1. Cost Benefit Analysis of Boat Lifts

    2014-09-01

    associated with commercial boat lifts were obtained through a market survey based on products advertised for sale to the general public. The information...from the market survey and knowledge of specific boat maintenance items susceptible to cost reduction using a boat lift were then compared to identify...transferred to the Boat Inventory Manager ( BIM ). Custodians are responsible for maintaining boats and small craft in good working order at all times

  2. Characterization of Oscillatory Lift in MFC Airfoils

    Lang Jr, Joseph Reagle

    2014-01-01

    The purpose of this research is to characterize the response of an airfoil with an oscillatory morphing, Macro-fiber composite (MFC) trailing edge. Correlation of the airfoil lift with the oscillatory input is presented. Modal analysis of the test airfoil and apparatus is used to determine the frequency response function. The effects of static MFC inputs on the FRF are presented and compared to the unactuated airfoil. The transfer function is then used to determine the lift component du...

  3. Gurney flap—Lift enhancement, mechanisms and applications

    Wang, J. J.; Li, Y. C.; Choi, K.-S.

    2008-01-01

    Since its invention by a race car driver Dan Gurney in 1960s, the Gurney flap has been used to enhance the aerodynamics performance of subsonic and supercritical airfoils, high-lift devices and delta wings. In order to take stock of recent research and development of Gurney flap, we have carried out a review of the characteristics and mechanisms of lift enhancement by the Gurney flap and its applications. Optimum design of the Gurney flap is also summarized in this paper. For the Gurney flap to be effective, it should be mounted at the trailing edge perpendicular to the chord line of airfoil or wing. The flap height must be of the order of local boundary layer thickness. For subsonic airfoils, an additional Gurney flap increases the pressure on the upstream surface of the Gurney flap, which increases the total pressure of the lower surface. At the same time, a long wake downstream of the flap containing a pair of counter-rotating vortices can delay or eliminate the flow separation near the trailing edge on the upper surface. Correspondingly, the total suction on the airfoil is increased. For supercritical airfoils, the lift enhancement of the Gurney flap mainly comes from its ability to shift the shock on the upper surface in the downstream. Applications of the Gurney flap to modern aircraft design are also discussed in this review.

  4. We keep on truckin': Trends in freight energy use and carbon emissions in 11 IEA countries

    Eom, Jiyong; Schipper, Lee; Thompson, Lou

    2012-01-01

    Based on detailed national and international data on freight transportation, we analyze trends in freight CO 2 emissions in 11 IEA countries from the earliest year of data availability to 2007–2010. The cross-country comparison of the freight transportation sector indicates that per capita CO 2 emissions span a wide range and are mostly determined by local needs without full knowledge or coordination with policies and practices in other countries. Over the last several decades, while many developed countries have experienced decreased coupling between total freight activity (measured in tonne-km) and income, no major indication of decreased coupling between trucking and income was found. Rather, the coupling has been strengthened in many countries due to a continued increase in the share of trucking in total freight activity. The energy intensity of trucking has exhibited very large variation among the countries, and its recent international trends are mixed, providing greater challenges to reduce freight CO 2 emissions. Modal shift toward rail away from truck presents a sizeable opportunity to reduce freight CO 2 emissions, although the potential gain varies widely among the countries. - Highlights: ► We analyze trends in freight CO 2 emissions in 11 IEA countries. ► Many of them experienced decreased coupling between freight and income. ► No major indication of decoupling was found between trucking and income. ► The energy intensity of trucking exhibited very large variation. ► The trends of trucking energy intensity are mixed. ► There is a huge opportunity of reducing emissions by shifting toward rail.

  5. The current state of the rail freight market in Russia: new forms of governance

    Koncipko Natal'ja Vladimirovna

    2015-10-01

    Unsolved problems of the industry and the availability of infrastructure limited movements in the context of a sharp increase in the number of car Park led to the violation of a reasonable balance of rolling stock, the growth which outpaced the increase in transportation. This led to the reduction of hodnoty freight and has led to the simultaneous increase in the share of empty run freight car, and technological losses, including growth time of its turnover. The study showed that to improve the competitiveness of freight operators and increase their profits, you need to pass empty flights in centralized case management of JSC "RZD".

  6. DETERMINATION ALGORITHM OF OPTIMAL GEOMETRICAL PARAMETERS FOR COMPONENTS OF FREIGHT CARS ON THE BASIS OF GENERALIZED MATHEMATICAL MODELS

    O. V. Fomin

    2013-10-01

    Full Text Available Purpose. Presentation of features and example of the use of the offered determination algorithm of optimum geometrical parameters for the components of freight cars on the basis of the generalized mathematical models, which is realized using computer. Methodology. The developed approach to search for optimal geometrical parameters can be described as the determination of optimal decision of the selected set of possible variants. Findings. The presented application example of the offered algorithm proved its operation capacity and efficiency of use. Originality. The determination procedure of optimal geometrical parameters for freight car components on the basis of the generalized mathematical models was formalized in the paper. Practical value. Practical introduction of the research results for universal open cars allows one to reduce container of their design and accordingly to increase the carrying capacity almost by100 kg with the improvement of strength characteristics. Taking into account the mass of their park this will provide a considerable economic effect when producing and operating. The offered approach is oriented to the distribution of the software packages (for example Microsoft Excel, which are used by technical services of the most enterprises, and does not require additional capital investments (acquisitions of the specialized programs and proper technical staff training. This proves the correctness of the research direction. The offered algorithm can be used for the solution of other optimization tasks on the basis of the generalized mathematical models.

  7. Metabolic Responses to Weight Lifting

    Arnold Nelson

    2017-04-01

    Full Text Available Editor's Note, The ability to lift heavy loads while performing multiple repetitions is not only highly correlated with muscle mass or the total number actomyosin interactions, but also metabolic functions that includes substrate concentrations and by-product removal.  Muscles use adenosine triphosphate (ATP in at least three locations during exercise; to run the actomyosin interaction, operate sarcoplasmic reticulum calcium pumps, and operate sarcolemma sodium and potassium pumps.  Weight lifting sessions are considered to be an intermittent activity that includes only a few second bursts of high force and/or velocity movements followed by rest periods of up to several minutes. Therefore, the anaerobic pathways such as the phosphagen and glycolytic systems are the initial pathways to respond due in part to the ability to match the increased rates of ATP depletion by increasing ATP production. After the initial resting ATP stores are used up, the phosphagen system starts contributing to ATP replenishment.  This system consists of reactions from the creatine kinase (CK pathway and the adenylate kinase (AK pathway.  However, the CK pathway can only work at max capacity for a short period for resting phosphocreatine (PCr concentrations are only about 4-6 times the amount of resting ATP stores.  Once the PCr concentrations are depleted, the AK reaction will begin by using two adenosine diphosphate (ADP to form one ATP and one adenosine monophosphate (AMP. Although ATP is produced in this pathway, this production of ATP does coincide with an increased concentration of AMP. This is problematic because increased AMP levels will in turn stimulate the adenylate deaminase reaction, which will produce ammonia (NH3. This conversion of AMP into NH3 will result in the muscle cell having a net loss of total adenine nucleotides available to resynthesize ATP.  Glycolysis is the next reaction in line, which increases its role in ATP replenishment as PCr

  8. Barriers to and enablers for European rail freight transport for integrated door-to-door logistics service. Part 1: Barriers to multimodal rail freight transport

    Dewan Md Zahurul ISLAM

    2014-09-01

    Full Text Available The objective of this paper is to examine and identify barriers to and enablers for the European rail freight transport services as a transport chain partner along the supply chains in the changing market scenario. The changing market scenario includes, among others, requiring 'door-to-door' rather than 'terminal to terminal' and integrated service, competitive ability to attract non-rail cargo type, changes in the customer requirements (e.g. reliable service and changes in the operational requirements and practices. Using a literature review method, the paper is presented in two parts. The part 1 focuses on the identification of barriers to the European rail freight service by reviewing freight logistics services for global supply chains followed by the current performance of European rail freight transport followed by a discussion on the rail freight market liberalisation in Europe. Then rail freight transport in the Unites States (U.S. is discussed. The research notes that although the background, scope and necessity for reform measures in Europe differ from those of the U.S., some lessons can be learned and the main lesson is that an appropriate reform measure can enhance rail sector competitive ability in Europe. Examining and identifying the barriers in the part 1 (with the pan-Pacific examples of rail freight transports, the part 2 of the paper focuses on recommending clear actions and steps as enablers for the rail freight industry in general and operators in particular. The research in part 1 of the paper finds that: •\tIn many European countries, the rail freight market is not fully liberalised. In such market segment, infrastructure managers do act independently for incumbents and new entrant operators that hamper the progress of building a competitive market; •\tThe rail operators have not yet achieved the service quality (e.g. customer tailored service needed for the modern supply chains; •\tThey operate

  9. Heavy Lift for Exploration: Options and Utilization

    Creech, Steve; Sumrall, Phil

    2010-01-01

    Every study of exploration capabilities since the Apollo Program has recommended the renewal of a heavy lift launch capability for the United States. NASA is aggressively pursuing that capability. This paper will discuss several aspects of that effort and the potential uses for that heavy lift capability. The need for heavy lift was cited most recent in the findings of the Review of U.S. Human Space Flight Plans Committee. Combined with considerations of launch availability and on-orbit operations, the Committee finds that exploration will benefit from the availability of a heavy-lift vehicle, the report said. In addition, heavy lift would enable the launching of large scientific observatories and more capable deep-space missions. It may also provide benefit in national security applications. The most recent focus of NASA s heavy lift effort is the Ares V cargo launch vehicle, which is part of the Constellation Program architecture for human exploration beyond low Earth orbit (LEO). The most recent point-of-departure configuration of the Ares V was approved during the Lunar Capabilities concept Review (LCCR) in 2008. The Ares V first stage propulsion system consists of a core stage powered by six commercial liquid hydrogen/liquid oxygen (LH2/LOX) RS-68 engines, flanked by two 5.5-segment solid rocket boosters (SRBs) based on the 5-segment Ares I first stage. The boosters use the same Polybutadiene Acrylonitrile (PBAN) propellant as the Space Shuttle. Atop the core stage is the Earth departure stage (EDS), powered by a single J-2X upper stage engine based on the Ares I upper stage engine. The 33-foot-diameter payload shroud can enclose a lunar lander, scientific instruments, or other payloads. Since LCCR, NASA has continued to refine the design through several successive internal design cycles. In addition, NASA has worked to quantify the broad national consensus for heavy lift in ways that, to the extent possible, meet the needs of the user community.

  10. A Survey of Empty Container Flow Balance in Turkish Ports

    Ünal ÖZDEMİR; Abdulaziz GUNEROGLU; Süleyman KÖSE; Faruk Buğra DEMİREL

    2015-01-01

    Container transportation is the most preferred maritime commercial freight distribution in entire world except liquefied product transportation by tankers and bulk carriers. Totally 95% volume of general cargo is transported by container ships in the world due to fast, cheap and safe carrying potential of the goods transfer. Containerization has become recent phenomena in the field of maritime transportation and the quantity of goods transported by containers is increasing day by day as...

  11. Numerical Study of Transition of an Annular Lift Fan Aircraft

    Yun Jiang; Bo Zhang

    2016-01-01

    The present study aimed at studying the transition of annular lift fan aircraft through computational fluid dynamics (CFD) simulations. The oscillations of lift and drag, the optimization for the figure of merit, and the characteristics of drag, yawing, rolling and pitching moments in transition are studied. The results show that a two-stage upper and lower fan lift system can generate oscillations of lift and drag in transition, while a single-stage inner and outer fan lift system can elimin...

  12. Thread-Lift Sutures : Still in the Lift? A Systematic Review of the Literature

    Gulbitti, Haydar Aslan; Colebunders, Britt; Pirayesh, Ali; Bertossi, Dario; van der Lei, Berend

    Background: In 2006, Villa et al. published a review article concerning the use of thread-lift sutures and concluded that the technique was still in its infancy but had great potential to become a useful and effective procedure for nonsurgical lifting of sagged facial tissues. As 11 years have

  13. Thread-Lift Sutures : Still in the Lift? A Systematic Review of the Literature

    Gülbitti, Haydar Aslan; Colebunders, Britt; Pirayesh, Ali; Bertossi, Dario; van der Lei, Berend

    2018-01-01

    BACKGROUND: In 2006, Villa et al. published a review article concerning the use of thread-lift sutures and concluded that the technique was still in its infancy but had great potential to become a useful and effective procedure for nonsurgical lifting of sagged facial tissues. As 11 years have

  14. Effect of training and lifting equipment for preventing back pain in lifting and handling: systematic review

    Martimo, Kari-Pekka; Verbeek, Jos; Karppinen, Jaro; Furlan, Andrea D.; Takala, Esa-Pekka; Kuijer, P. Paul F. M.; Jauhiainen, Merja; Viikari-Juntura, Eira

    2008-01-01

    To determine whether advice and training on working techniques and lifting equipment prevent back pain in jobs that involve heavy lifting. Medline, Embase, CENTRAL, Cochrane Back Group's specialised register, CINAHL, Nioshtic, CISdoc, Science Citation Index, and PsychLIT were searched up to

  15. 77 FR 20558 - Federal Motor Vehicle Safety Standards; Platform Lifts for Motor Vehicles; Platform Lift...

    2012-04-05

    ... unrelated to the barrier's safety. Lift-U also questioned the agency's statement that it could be difficult... DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration 49 CFR Part 571 [Docket No. NHTSA-2012-0039] RIN 2127-AJ93 Federal Motor Vehicle Safety Standards; Platform Lifts for...

  16. A long hard road? Urban freight transport challenges facing South Africa

    Ittmann, HW

    2008-05-01

    Full Text Available shown very little interest in the increasingly severe freight transport problems facing urban areas, there is now growing interest in the logistics of collection and delivery services in towns and city centres....

  17. Evaluation of Urban Freight Deliveries using Microsimulation and Surrogate Safety Measures

    2018-02-01

    Freight deliveries on signalized urban streets are known to cause lane blockages during deliveries. When delivery vehicles block lanes of traffic near signalized intersections, the capacity of the intersection is affected. Current practice is for tra...

  18. Quantitative research regarding performance measures for intermodal freight transportation : executive summary

    1995-10-01

    The primary objective of this study is to provide information relative to the development of a set of performance measures for intermodal freight transportation. To accomplish this objective, data was collected, processed, and analyzed on the basis o...

  19. A mathematical model of functioning of channels of distribution of freight traffic

    Shramenko, N.

    2006-01-01

    The mathematical model of functioning of channels of distribution of freight traffics is developed at international transportations which allows to optimize technological parameters of separate parts and to minimize expenses along the logistical chain.

  20. 77 FR 73455 - Change to the Military Freight Carrier Registration Program (FCRP)

    2012-12-10

    ... (common, contract, logistics, freight forwarders, and brokers). This does not apply to registration of air, rail, ocean, pipeline, barge, international, and household goods TSPs. This update will be included in...

  1. The Critical Factors for Korean Freight Forwarders’ Purchasing Negotiation in International Logistics

    Soo Yong Shin

    2016-12-01

    Full Text Available The roles of freight forwarders as intermediaries continue to expand and become significant in international logistics. Purchasing negotiation is considered an important business process for freight forwarders and achieving a successful negotiation outcome should help forwarders to manage their business more effectively. This study used the analytical hierarchy process (AHP approach to identify the critical factors for successful purchasing negotiation for freight forwarders in Korea. A three-level AHP structure was constructed to examine the successful purchasing negotiation. The findings indicate that information (specifically quality of information is the most critical factor for a successful negotiation outcome for freight forwarders. This result turned out to be the same as the result found from the literature review. Literature review also indicated information as the most important factor.

  2. OECD Trilog Plenary Symposium : public policy issues in global freight logistics

    1998-01-01

    This is the fifth plenary symposium on public policy issues in global freight logistics conducted by the Organization for Economic Cooperation and Development (OECD). OECD's Trilateral Logistics Project, Trilog Project, is aimed at clarifying the pub...

  3. Open access for freight railroads : worthwhile or wasteful disruption, final report.

    2009-01-01

    This study compares the experience of the freight railroads in North America, Europe and : Australia with required access. Europe and Australia have pursued very different network access : strategies than the United States and Canada. Both the Europe...

  4. Columbus electronic freight management evaluation : achieving business benefits with EFM technologies.

    2009-03-01

    Effective innovation in information technology (IT) may be the most important tool for the private and public sectors to respond to international supply chain capacity constraints and congestion. Electronic Freight Management (EFM) technologies are m...

  5. Development of an operationally efficient PTC braking enforcement algorithm for freight trains.

    2013-08-01

    Software algorithms used in positive train control (PTC) systems designed to predict freight train stopping distance and enforce a penalty brake application have been shown to be overly conservative, which can lead to operational inefficiencies by in...

  6. Getting the goods without the bads : freight transportation demand management strategies to reduce urban impacts.

    2013-09-01

    This project identifies and evaluatesstrategies to reduce the social costs associated with goods movement in urban areas by managing : transportation demand. Information about various freight transportation demand management (TDM) strategies was gath...

  7. Economic benefits of productivity increases through truck-to-rail mode shift in freight transport.

    2016-01-29

    Although the study of economic benefits of improving (or not improving) the efficiency of freight movement has been recognized as one of the critical research topic by the decision makers and researchers alike, there remains a dearth of transparent a...

  8. Developing a sustainable freight transportation framework with the consideration of improving safety and minimizing carbon emissions.

    2011-09-01

    Despite the difficulties of the American economy in recent years the transportation sector continues to expand. Freight transportation alone has been projected to increase enormously even if the economy as a whole only manages a very moderate growth....

  9. A data library management system for midwest FreightView and its data repository.

    2011-03-01

    Midwest FreightView (MWFV) and its associated data repository is part of a large multifaceted : effort to promote regional economic development throughout the Great Lakes : system. The main objective for the system is to promote sustainable maritime ...

  10. Valuing long-haul and metropolitan freight travel time and reliability

    2000-12-01

    Most evaluations and economic assessments of transportation proposal and policies in Australia omit a valuation of time spent in transit for individual items or loads of freight. Knowledge of delays and the practical value of reliability can be usefu...

  11. Freight Transportation Information Systems and Their Implications for R&D Policy

    1974-03-01

    The current use of computerized management information and control systems in intercity freight transportation are examined. Each of the four modes (railroad, motor carrier, maritime and air cargo industries) is investigated. In each case, computer i...

  12. Freight data architecture business process, logical data model, and physical data model.

    2014-09-01

    This document summarizes the study teams efforts to establish data-sharing partnerships : and relay the lessons learned. In addition, it provides information on a prototype freight data : architecture and supporting description and specifications ...

  13. CERN takes off at Lift11

    Katarina Anthony

    2011-01-01

    CERN was especially featured at the Lift11 conference, held in Geneva early this month. Tara Shears delivered a keynote speech at the event, while Paul Oortman Gerlings (DGS-SEE) and Erik van der Bij (BE-CO) – winners of the Bulletin’s Lift11 competition – organised the CERN workshop.   Paul Oortman Gerlings takes questions at CERN's Lift11 workshop. Lift11 was an opportunity for CERN to reach today’s innovators and developers. “The event was filled with people eager to learn new ideas, who were not afraid to ask questions,” says Tara Shears, physicist from the LHCb Collaboration who presented an update on the status of the LHC. “People were amazed by what goes on inside CERN, by our science, our facilities – even by the way we carry out our day-to-day work. It is a branch of fundamental research that really seems to inspire everyone.” A small Lift11 group had the chance to take a tour of CERN, ...

  14. Win a lift to the future!

    CERN Bulletin

    2010-01-01

    The Communication Group is organising a competition offering people at CERN the chance to submit their ideas and win a ticket to the Lift10 Conference, which will be held in Geneva from 5 to7 May.   Lift is a community of technology "pioneers", created in 2006. It now involves more than 4,000 people from over 60 countries, who meet regularly in Europe and in Asia to explore the social implications of new technologies and the major shifts ahead. CERN is one of the academic partners of the next Lift conference, whose theme is "Connected people”. For this occasion, 10 free tickets to the conference will be awarded to the "CERNois" who come up with the best answers to the question: “How would you contribute to Lift10?” Those taking part in the competition can choose from among the following categories: - run workshop(s); - cover the conference on a blog; - coordinate a discussion during the breaks; - organize a lift@home ...

  15. Promoting intermodal freight transport through the development of dry ports in Asia: An environmental perspective

    Shinya Hanaoka

    2011-07-01

    This study reviews the status of intermodal freight transport in Asia from an environmental perspective. It examines intermodal transport opportunities presented by the development of inland dry ports in hinterland locations. This paper also reviews selected case studies of dry port development in Asia. Finally, we present the lessons to be learned for the promotion of intermodal freight transport from selected Asian countries as well as the policy options available.

  16. Simulation-Based Approach to Operating Costs Analysis of Freight Trucking

    Ozernova Natalja

    2015-12-01

    Full Text Available The article is devoted to the problem of costs uncertainty in road freight transportation services. The article introduces the statistical approach, based on Monte Carlo simulation on spreadsheets, to the analysis of operating costs. The developed model gives an opportunity to estimate operating freight trucking costs under different configuration of cost factors. Important conclusions can be made after running simulations regarding sensitivity to different factors, optimal decisions and variability of operating costs.

  17. Analysis of the Connectivity and Centralization of Regional Air Freight Networks.

    1978-08-01

    economic efficiency. Pegrum char- acterized the CAB’s ratemaking policy as thirty years of in- decision. In surveys comparing regulated and unregulated b...cipants in the air freight system are basically the shippers, the surface carriers, and the air carriers. Air freight forwarders are "indirect carriers...aircraft characteristics which I will raise the break-even load factor are its shape and design density. Aircraft fuselages are basically cylindrical

  18. An Analysis of International Air Freight Forwarding Support for the United States Navy.

    1985-06-01

    2. The Role of IATA in Ratemaking ... ...... 23 3. Current Environment ..... ........... 24 III. BURLINGTON-NORTHERN AIR FREIGHT, INCORPORATED . . 28...carrier is permitted access [Ref. 16]. 2. The Role of IATA in Ratemaking Factors other than shipper demand and carrier costs affect international freight...capability of the Air Force and Navy into one transport organization called the Military Air Transport Service (MATS). The mission of MATS was basically that

  19. Automation of calculation of fastening of non-standard freights on sea vessels

    Андрій Валерійович Пархотько

    2015-11-01

    Full Text Available Correct positioning and fastening of freights are important safety conditions of navigation. Unreliable positioning and fastening of freights results in shipwreck and is the reason for injuries and losses of human lives both in the sea and during loading and unloading. To solve the above-mentioned problems, the International Maritime Organization publishes manuals in the form of either the Assembly resolutions, or the circulars approved by Maritime Safety Committee. The correct definition of necessary quantity of lashings and their positioning has the greatest impact on safe fastening of freights. The sea being rough, the vessel is accelerated both in longitudinal, and vertical and prevailing cross directions. The forces created by these accelerations generate the majority of the problems in fastening. The order of calculations of the force moments and forces acting upon the freights being shipped by sea vessels has been shown in the article. To know the proper number of lashings the calculations of the forces acting upon the freights being shipped as compared with the forces holding the freights and taking into account the strength, the number and the fastening angle of the lashings must be made. Оption of realization of algorithm of calculation with use of the а computer program to make these calculations has been offered. Some recommendations so that the program could be used by the management of the vessel, the surveyor companies and technologists of the port have been given as well as an example of such a calculation

  20. An Investigation into the Non-bulk Rail Freight Transport in Australia

    Hadi Ghaderi

    2015-03-01

    Full Text Available In the last decade freight transport has gained further momentum in Australia, partly through significant demand growth at both domestic and international levels and partly as the result of Australia's long term need for infrastructure decision making. Amongst the freight task, non-bulk freight is the fastest growing freight task in Australia and is forecast to grow much faster than the rate of population growth and the average national GDP growth. However, rail's share in the non-bulk market has declined significantly in the last four decades. This study therefore provides an insight into the efficiency and operational management issues facing by the Australian non-bulk rail sector by focusing on three areas; the level of track compatibility and the relevant operational issues, the demographics of non-bulk freight in Australia and the current status of intermodal terminals in relation to rail connectivity and location. As the result, a more detailed understanding of the current shortages in the Australian non-bulk rail freight sector is achieved and managerial implications are provided.

  1. TMI-2 reactor vessel plenum final lift

    Wilson, D.C.

    1986-01-01

    Removal of the plenum assembly from the TMI-2 reactor vessel was necessary to gain access to the core region for defueling. The plenum was lifted from the reactor vessel by the polar crane using three specially designed pendant assemblies. It was then transferred in air to the flooded deep end of the refueling canal and lowered onto a storage stand where it will remain throughout the defueling effort. The lift and transfer were successfully accomplished on May 15, 1985 in just under three hours by a lift team located in a shielded area within the reactor building. The success of the program is attributed to extensive mockup and training activities plus thorough preparations to address potential problems. 54 refs

  2. Quadratic Interpolation and Linear Lifting Design

    Joel Solé

    2007-03-01

    Full Text Available A quadratic image interpolation method is stated. The formulation is connected to the optimization of lifting steps. This relation triggers the exploration of several interpolation possibilities within the same context, which uses the theory of convex optimization to minimize quadratic functions with linear constraints. The methods consider possible knowledge available from a given application. A set of linear equality constraints that relate wavelet bases and coefficients with the underlying signal is introduced in the formulation. As a consequence, the formulation turns out to be adequate for the design of lifting steps. The resulting steps are related to the prediction minimizing the detail signal energy and to the update minimizing the l2-norm of the approximation signal gradient. Results are reported for the interpolation methods in terms of PSNR and also, coding results are given for the new update lifting steps.

  3. Lift mechanics of downhill skiing and snowboarding.

    Wu, Qianhong; Igci, Yesim; Andreopoulos, Yiannis; Weinbaum, Sheldon

    2006-06-01

    This study is conducted to develop a simplified mathematical model to describe the lift mechanics of downhill skiing and snowboarding, where the lift contributions due to both the transiently trapped air and the compressed solid phase (snow crystals) are determined. To our knowledge, this is the first time that anyone has attempted to realistically estimate the relative contribution of the transiently trapped air to the total lift in skiing and snowboarding. The model uses Shimizu's empirical relation to predict the local variation in Darcy permeability due to the compression of the solid phase. The forces and moments on the skier or snowboarder are used to predict the angle of attack of the planing surface, the penetration depth at the leading edge, and the shift in the center of pressure for two typical snow types, fresh and wind-packed snow. We present numerical solutions for snowboarding and asymptotic analytic solutions for skiing for the case where there are no edging or turning maneuvers. The force and moment balance are then used to develop a theory for control and stability in response to changes in the center of mass as the individual shifts his/her weight. Our model predicts that for fine-grained, windpacked snow that when the velocity (U) of the snowboarder or skier is 20 m.s, approximately 50% of the total lift force is generated by the trapped air for snowboarding and 40% for skiing. For highly permeable fresh powder snow, the lift contribution from the pore air pressure drops substantially. This paper develops a new theoretical framework for analyzing the lift mechanics and stability of skis and snowboards that could have important applications in future ski and snowboard design.

  4. Testing lifting systems in nuclear facilities

    Kling, H.; Laug, R.

    1984-01-01

    Lifting systems in nuclear facilities must be inspected at regular intervals after having undergone their first acceptance test. These inspections are frequently carried out by service firms which not only employ the skilled personnel required for such jobs but also make available the necessary test equipment. The inspections in particular include a number of sophisticated load tests for which test load systems have been developed to allow lifting systems to be tested so that reactor specific boundary conditions are taken into account. In view of the large number of facilities to be inspected, the test load system is a modular system. (orig.) [de

  5. Asymmetric Gepner models II. Heterotic weight lifting

    Gato-Rivera, B. [NIKHEF Theory Group, Kruislaan 409, 1098 SJ Amsterdam (Netherlands); Instituto de Fisica Fundamental, CSIC, Serrano 123, Madrid 28006 (Spain); Schellekens, A.N., E-mail: t58@nikhef.n [NIKHEF Theory Group, Kruislaan 409, 1098 SJ Amsterdam (Netherlands); Instituto de Fisica Fundamental, CSIC, Serrano 123, Madrid 28006 (Spain); IMAPP, Radboud Universiteit, Nijmegen (Netherlands)

    2011-05-21

    A systematic study of 'lifted' Gepner models is presented. Lifted Gepner models are obtained from standard Gepner models by replacing one of the N=2 building blocks and the E{sub 8} factor by a modular isomorphic N=0 model on the bosonic side of the heterotic string. The main result is that after this change three family models occur abundantly, in sharp contrast to ordinary Gepner models. In particular, more than 250 new and unrelated moduli spaces of three family models are identified. We discuss the occurrence of fractionally charged particles in these spectra.

  6. Soccer ball lift coefficients via trajectory analysis

    Goff, John Eric; Carre, Matt J

    2010-01-01

    We performed experiments in which a soccer ball was launched from a machine while two high-speed cameras recorded portions of the trajectory. Using the trajectory data and published drag coefficients, we extracted lift coefficients for a soccer ball. We determined lift coefficients for a wide range of spin parameters, including several spin parameters that have not been obtained by today's wind tunnels. Our trajectory analysis technique is not only a valuable tool for professional sports scientists, it is also accessible to students with a background in undergraduate-level classical mechanics.

  7. Soccer ball lift coefficients via trajectory analysis

    Goff, John Eric [Department of Physics, Lynchburg College, Lynchburg, VA 24501 (United States); Carre, Matt J, E-mail: goff@lynchburg.ed [Department of Mechanical Engineering, University of Sheffield, Sheffield S1 3JD (United Kingdom)

    2010-07-15

    We performed experiments in which a soccer ball was launched from a machine while two high-speed cameras recorded portions of the trajectory. Using the trajectory data and published drag coefficients, we extracted lift coefficients for a soccer ball. We determined lift coefficients for a wide range of spin parameters, including several spin parameters that have not been obtained by today's wind tunnels. Our trajectory analysis technique is not only a valuable tool for professional sports scientists, it is also accessible to students with a background in undergraduate-level classical mechanics.

  8. Asymmetric Gepner models II. Heterotic weight lifting

    Gato-Rivera, B.; Schellekens, A.N.

    2011-01-01

    A systematic study of 'lifted' Gepner models is presented. Lifted Gepner models are obtained from standard Gepner models by replacing one of the N=2 building blocks and the E 8 factor by a modular isomorphic N=0 model on the bosonic side of the heterotic string. The main result is that after this change three family models occur abundantly, in sharp contrast to ordinary Gepner models. In particular, more than 250 new and unrelated moduli spaces of three family models are identified. We discuss the occurrence of fractionally charged particles in these spectra.

  9. Emissions of CO2 from road freight transport in London: Trends and policies for long run reductions

    Zanni, Alberto M.; Bristow, Abigail L.

    2010-01-01

    Freight transport has been receiving increasing attention in both literature and practice following the growing recognition of its importance in urban transport planning. This paper analyses historical and projected road freight CO 2 emissions in the city of London and explores the potential mitigation effect of a set of freight transport policies and logistics solutions. Findings indicate a range of policies with potential to reduce emissions in the period up to 2050. However, this reduction would appear to only be capable of partly counterbalancing the projected increase in freight traffic. More profound behavioural measures therefore appear to be necessary for London's CO 2 emissions reduction targets to be met.

  10. Readiness of freight transportation system at special economic zone of Lhokseumawe

    Fithra, Herman; Sirojuzilam, Saleh, Sofyan M.; Erlina

    2017-11-01

    Geo-economic advantages of Lhokseumawe and Aceh Utara District lies on the geographical location of Aceh crossed by Sea Lane of Communication (Sloc), the Malacca Strait. Located at the Malacca Strait, the Special Economic Zone (Kawasan Ekonomi Khusus/ KEK) of Arun Lhokseumawe has a comparative advantage to be part of the global production network or the global value chain. This study aims to determine freight transportation system to support KEK Lhokseumawe, especially the availability of multimodal transport and multimodal infrastructure. The result shows that KEK Lhokseumawe driven by SOEs in Lhokseumawe and Aceh Utara is urgent to be realized for economic acceleration and to grow new economic growth in Aceh. Multimodal transport in KEK Lhokseumawe is also available, including Ro-Ro ships, train availability from Dewantara sub-district to Muara Batu Sub-district, various types of truck with small, medium and large capacity. The available multimodal infrastructure includes international sea ports, road network connectivity with structure pavement rating of 94.62%, and railroad tracks indicating that multimodal transportation in KEK Lhokseumawe are ready to utilize. Regulatory requirements relating to the operation of all ports in KEK Lhokseumawe as export / import gate are required and serve the loading and loading activities of Containers, and as a place of origin of goods on the east coast of Aceh.

  11. ON OPERATION OF 740 M LONG FREIGHT TRAINS ON CZECH TEN-T RAILWAY NETWORK

    Michal Drábek

    2016-09-01

    Full Text Available Regulation (EU No 1315/2013 defines actual scope of core and comprehensive TEN-T network, including both networks for railway freight transport. For the core network, possibility to operate 740 m long freight trains is required. The aim of this paper is to analyse availability of appropriate overtaking tracks for 740 m long freight trains. Due to ETCS braking curves and odometry, such trains, after ETCS implementation, will require 780-800 m long overtaking tracks. For practical reasons (e.g. bypass lines, whole Czech railway TEN-T network is analysed. The overtaking track, whose occupation means influence on scheduled traffic or threat to boarding passengers, are excluded. The data was collected from station schemes from Collection of Official Requisites for 2015/16 Timetable, issued by SŽDC, Czech state Infrastructure Manager. Most of appropriate tracks are over 800 m long, but their density in the network and in particular directions varies considerably. For freight traffic, gradient of the line is important, so in the resulting figure, there are marked significant peaks for particular lines as well. Czech TEN-T lines are further segmented on the basis of number of tracks and their traffic character. Then, specific issues on overtaking or crossing of 740 m long freight trains are discussed. As a conclusion, for long-term development of Czech TEN-T lines, targeted investment is recommended not only for passenger railway, but also for freight railway. An attractive capacity offer for railway undertakings, which can stimulate freight traffic on European Rail freight corridors, can be represented by network-bound periodic freight train paths with suitable long overtaking tracks outside bottlenecks. After the overtaking by passenger trains, a freight train should run without stop through large node station or a bottleneck area. Before the sections with high gradients, coupling of additional locomotives should be connected with the overtaking

  12. Lifting devices in nuclear power plants

    Anon.

    1978-01-01

    The regulation applies to lifts, cranes, winches, rail trolleys, load pick-up equipment and fuel charging machines for LWR reactors, as far as these are employed in plants for the production or fission of nuclear fuels or for the reprocessing of spent nuclear fuels or for the storage or other uses of nuclear fuels. (orig.) 891 HP [de

  13. Leading-Edge Vortex lifts swifts

    Videler, JJ; Stamhuis, EJ; Povel, GDE

    2004-01-01

    The current understanding of how birds fly must be revised, because birds use their hand-wings in an unconventional way to generate lift and drag. Physical models of a common swift wing in gliding posture with a 60degrees sweep of the sharp hand-wing leading edge were tested in a water tunnel.

  14. Lifts of matroid representations over partial fields

    Pendavingh, R.A.; Zwam, van S.H.M.

    2010-01-01

    There exist several theorems which state that when a matroid is representable over distinct fields F1,...,Fk , it is also representable over other fields. We prove a theorem, the Lift Theorem, that implies many of these results. First, parts of Whittle's characterization of representations of

  15. Lifts of projective congruence groups, II

    Kiming, Ian

    2014-01-01

    We continue and complete our previous paper ``Lifts of projective congruence groups'' concerning the question of whether there exist noncongruence subgroups of  that are projectively equivalent to one of the groups  or . A complete answer to this question is obtained: In case of  such noncongruence...

  16. Measuring Lift with the Wright Airfoils

    Heavers, Richard M.; Soleymanloo, Arianne

    2011-01-01

    In this laboratory or demonstration exercise, we mount a small airfoil with its long axis vertical at one end of a nearly frictionless rotating platform. Air from a leaf blower produces a sidewise lift force L on the airfoil and a drag force D in the direction of the air flow (Fig. 1). The rotating platform is kept in equilibrium by adding weights…

  17. The Revolutionary Vertical Lift Technology (RVLT) Project

    Yamauchi, Gloria K.

    2018-01-01

    The Revolutionary Vertical Lift Technology (RVLT) Project is one of six projects in the Advanced Air Vehicles Program (AAVP) of the NASA Aeronautics Research Mission Directorate. The overarching goal of the RVLT Project is to develop and validate tools, technologies, and concepts to overcome key barriers for vertical lift vehicles. The project vision is to enable the next generation of vertical lift vehicles with aggressive goals for efficiency, noise, and emissions, to expand current capabilities and develop new commercial markets. The RVLT Project invests in technologies that support conventional, non-conventional, and emerging vertical-lift aircraft in the very light to heavy vehicle classes. Research areas include acoustic, aeromechanics, drive systems, engines, icing, hybrid-electric systems, impact dynamics, experimental techniques, computational methods, and conceptual design. The project research is executed at NASA Ames, Glenn, and Langley Research Centers; the research extensively leverages partnerships with the US Army, the Federal Aviation Administration, industry, and academia. The primary facilities used by the project for testing of vertical-lift technologies include the 14- by 22-Ft Wind Tunnel, Icing Research Tunnel, National Full-Scale Aerodynamics Complex, 7- by 10-Ft Wind Tunnel, Rotor Test Cell, Landing and Impact Research facility, Compressor Test Facility, Drive System Test Facilities, Transonic Turbine Blade Cascade Facility, Vertical Motion Simulator, Mobile Acoustic Facility, Exterior Effects Synthesis and Simulation Lab, and the NASA Advanced Supercomputing Complex. To learn more about the RVLT Project, please stop by booth #1004 or visit their website at https://www.nasa.gov/aeroresearch/programs/aavp/rvlt.

  18. Thread-Lift Sutures: Still in the Lift? A Systematic Review of the Literature.

    Gülbitti, Haydar Aslan; Colebunders, Britt; Pirayesh, Ali; Bertossi, Dario; van der Lei, Berend

    2018-03-01

    In 2006, Villa et al. published a review article concerning the use of thread-lift sutures and concluded that the technique was still in its infancy but had great potential to become a useful and effective procedure for nonsurgical lifting of sagged facial tissues. As 11 years have passed, the authors now performed again a systematic review to determine the real scientific current state of the art on the use of thread-lift sutures. A systematic review was performed according to Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines using the PubMed database and using the Medical Subject Headings search term "Rhytidoplasty." "Rhytidoplasty" and the following entry terms were included by this Medical Subject Headings term: "facelift," "facelifts," "face Lift," "Face Lifts," "Lift," "Face," "Lifts," "Platysmotomy," "Platysmotomies," "Rhytidectomy," "Rhytidectomies," "Platysmaplasty," "and "Platysmaplasties." The Medical Subject Headings term "Rhytidoplasty" was combined with the following search terms: "Barbed suture," "Thread lift," "APTOS," "Suture suspension," "Percutaneous," and "Silhouette suture." RefWorks was used to filter duplicates. Three of the authors (H.A.G., B.C., and B.L.) performed the search independently. The initial search with all search terms resulted in 188 articles. After filtering the duplicates and the articles about open procedures, a total of 41 articles remained. Of these, the review articles, case reports, and letters to the editor were subsequently excluded, as were reports dealing with nonbarbed sutures, such as Vicryl and Prolene with Gore-Tex. This resulted in a total of 12 articles, seven additional articles since the five articles reviewed by Villa et al. The authors' review demonstrated that, within the past decade, little or no substantial evidence has been added to the peer-reviewed literature to support or sustain the promising statement about thread-lift sutures as made by Villa et al. in 2006 in terms of

  19. Interstate 80 freight corridor analysis : current freight traffic, trends and projections in special consideration of Wyoming policy-makers in planning, engineering, highway safety and enforcement.

    2008-12-01

    "This report is the result of a two-part study intended to provide input to WYDOTs long-term planning process for the I-80 facility. The first phase of the study involved an on-the-ground freight survey of over 2,000 truckers traveling eastbound a...

  20. Mannesmann Demag crawler cranes give plants a big lift

    Anon.

    1987-01-01

    Preassembly of large reactor components reduces construction costs, but creates the need for cranes with larger lifting capacities. A German company is extending its range with a new crawler crane which will lift up to 1600t. (author)

  1. Effect of hydrogen addition on autoignited methane lifted flames

    Choin, Byung Chul; Chung, Suk-Ho

    2012-01-01

    Autoignited lifted flames in laminar jets with hydrogen-enriched methane fuels have been investigated experimentally in heated coflow air. The results showed that the autoignited lifted flame of the methane/hydrogen mixture, which had an initial

  2. Lifting Safety: Tips To Help Prevent Back Injuries

    ... Prevent Back Injuries Lifting Safety: Tips to Help Prevent Back Injuries Share Print Back injuries are common problems at work, home, and play. They can be caused by accidents or improper lifting technique. Below are tips to ...

  3. Analysis of lifting beam and redesigned lifting lugs for 241-AZ-01A decant pump

    Coverdell, B.L.

    1994-01-01

    This supporting document details calculations for the proper design of a lifting beam and redesigned lifting lugs for the 241AZO1A decant pump. This design is in accordance with Standard Architectural-Civil Design Criteria, Design Loads for Facilities (DOE-RL 1989) and is safety class three. The design and fabrication is in accordance with American Institute of Steel Construction, Manual of Steel Construction, (AISC, 1989) and the Hanford Hoisting and Rigging Manual (DOE-RL 1993)

  4. CFD Study of a New Annular Lift Fan Configuration with High Lift Efficiency

    Yun Jiang

    2017-03-01

    Full Text Available A new annular lift fan configuration that has very high lift efficiency is explored by using a numerical scheme. The inlet lip radius and diffuser angle are maximized by semicircle duct walls and the location of the lift fan is moved from the throat to the diffuser area to maximize the diffusion effect of the ducted fan. The improved lift fan achieves the figure of merit of 0.772 and the power loading of 9.03 lbs/hp without ground effect, very close to the theoretical limit. Under the ground effect, the figure of merit reaches 0.822 with the power loading of 9.62 lbs/hp. The improved lift efficiency deteriorates the transition characteristics with higher momentum drag and pitching moment. However, with the aid of jet thrusts directly providing part of the lift during transition, the peak of momentum drag and pitching moment can be lowered. A total thrust to weight ratio of 0.7 is enough for all of the requirements in transition and in hover and for the maximum speed of 0.75 Mach in cruise flight.

  5. The Design of Wheelchair Lifting Mechanism and Control System

    ZHAO Cong; WANG Zheng-xing; JIANG Shi-hong; ZHANG Li; LIU Zheng-yu

    2014-01-01

    In order to achieve a wheelchair lift function, this paper designs a tri-scissors mechanism. Through the so-called H-type transmission and L-type swing rod, the three scissors mechanisms lift in the same rate with only one liner motor while ensuring the stability of the lift. Finite element analysis in ANSYS is performed to verify the material strength. The control system with Sunplus SCM achieves the voice control of wheelchair walking and lifting.

  6. Liftings in Finite Graphs and Linkages in Infinite Graphs with Prescribed Edge-Connectivity

    Ok, Seongmin; Richter, R. Bruce; Thomassen, Carsten

    2016-01-01

    Let G be a graph and let s be a vertex of G. We consider the structure of the set of all lifts of two edges incident with s that preserve edge-connectivity. Mader proved that two mild hypotheses imply there is at least one pair that lifts, while Frank showed (with the same hypotheses......) that there are at least (deg(s) - 1)/2 disjoint pairs that lift. We consider the lifting graph: its vertices are the edges incident with s, two being adjacent if they form a liftable pair. We have three main results, the first two with the same hypotheses as for Mader’s Theorem. (i)Let F be a subset of the edges incident...... with s. We show that F is independent in the lifting graph of G if and only if there is a single edge-cut C in G of size at most r + 1 containing all the edges in F, where r is the maximum number of edge-disjoint paths from a vertex (not s) in one component of G - C to a vertex (not s) in another...

  7. Future of energy efficiency and carbon dioxide emissions of Finnish road freight transport

    Liimatainen, H.

    2013-05-15

    The targets to reduce the carbon dioxide emissions to mitigate climate change are as much applicable to the road freight transport sector as they are to all other sectors of society. The aim of this research is to support the initiatives of the Finnish government for improving the energy efficiency and reducing the CO{sub 2} emissions of road freight transport. This is done by forecasting the future development and giving the policy makers guidance on effective measures for promoting road freight energy efficiency and CO{sub 2} reduction. In the study a new method was introduced for connecting the fuel consumption data and goods transport data gathered from the official Finnish road statistics. This method enabled a detailed analysis of the interrelations between the economy, road freight transport, energy consumption and emissions. This analysis was conducted for the years 1995-2010 and the results were used as background information in the Delphi panel of experts. The experts estimated the development of the Finnish road freight sector to the year 2030. Furthermore, a web-based survey was conducted among Finnish road freight hauliers and shippers in order to explore the attitudes and measures related to the energy efficiency. Expert panel workshops were also organised to identify obstacles for the development of the energy efficiency of road freight transport as well as a wide selection of measures to overcome them. The results indicate that the economic development of different branches has a great effect on the energy efficiency and carbon dioxide emissions of road freight transport. Reaching the carbon emission target for the year 2030 is possible in the light of the scenarios which were formed based on expert forecasts. However, the target can be achieved with very different development paths, e.g. the structure of the national economy and the volume of transport seem to vary widely in the different scenarios. In the proposed recommendations on the measures

  8. 21 CFR 880.5500 - AC-powered patient lift.

    2010-04-01

    ...) MEDICAL DEVICES GENERAL HOSPITAL AND PERSONAL USE DEVICES General Hospital and Personal Use Therapeutic Devices § 880.5500 AC-powered patient lift. (a) Identification. An AC-powered lift is an electrically powered device either fixed or mobile, used to lift and transport patients in the horizontal or other...

  9. 75 FR 1070 - Cargo Securing Methods for Packages in Transport Vehicles or Freight Containers

    2010-01-08

    ...: Federal eRulemaking Portal: http://www.regulations.gov . Fax: 202-493-2251. Mail: Docket Management... comments. FOR FURTHER INFORMATION CONTACT: If you have questions on this notice, call or e-mail Morgan Armstrong, telephone 202-372-1419, e-mail: [email protected] . If you have questions on viewing or...

  10. 49 CFR 174.83 - Switching placarded rail cars, transport vehicles, freight containers, and bulk packagings.

    2010-10-01

    ... TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS CARRIAGE BY RAIL Handling of Placarded Rail Cars, Transport... force than is necessary to complete the coupling; or (3) Struck by any car moving under its own momentum... its own momentum may be permitted to strike any placarded flatcar or any flatcar carrying a placarded...

  11. Private–public partnerships: A mechanism for freight transport infrastructure delivery?

    Hans W. Ittmann

    2017-02-01

    Full Text Available Background: Freight transport infrastructure is an indispensable requirement for economic growth, development and prosperity. Public–private partnerships (PPPs, as a mechanism to fund and construct freight transport infrastructure, have been suggested by many in private and public sectors. Objectives: The concept of PPPs is dealt with, and the relevance of this mechanism is expanded upon. It is clear that PPPs in the rail environment present huge challenges and complexities. The objective was to determine whether PPPs are a viable mechanism to fund freight transport infrastructure in South Africa. Method: Experiences with rail PPPs worldwide have shown that many failures occurred implementing these. The challenges and complexities of PPPs, in the freight rail environment, are highlighted together with the benefits, risks and best practices of PPPs. It is shown that suitable policies, legislation and regulations concerning PPPs are in place in South Africa. Results: A proper framework and methodology to proceed should be in place. PPPs take time and are complex. Government involvement remains essential. Firm contractual agreements between parties are essential. Risk handling, risk sharing and the magnitude of risks should be clarified with agreement on where the risks reside. Financial viability, with value for money (VfM and financial benefits for private sector role players are non-negotiable. Conclusion: Appropriate legislation for implementing PPPs must be in place while two further important elements are economic circumstances and proper project execution. Taking all these factors into consideration, the freight transport sector can only benefit from successfully negotiated and implemented PPPs.

  12. Energy intensity in road freight transport of heavy goods vehicles in Spain

    Andrés, Lidia; Padilla, Emilio

    2015-01-01

    This paper examines the factors that have influenced the energy intensity trend of the Spanish road freight transport of heavy goods vehicles over the period 1996–2012. This article aims to contribute to a better understanding of these factors and to inform the design of measures to improve energy efficiency in road freight transport. The paper uses both annual single-period and chained multi-period multiplicative LMDI-II decomposition analysis. The results suggest that the decrease in the energy intensity of Spanish road freight in the period is explained by the change in the real energy intensity index (lower energy consumption per tonne-kilometre transported), which is partially offset by the behaviour of the structural index (greater share in freight transport of those commodities the transportation of which is more energy intensive). The change in energy intensity is analysed in more depth by quantifying the contribution of each commodity through the attribution of changes in Divisia indices. -- Highlights: •We examine energy intensity of Spanish road freight transport over 1996–2012. •We employ single-period and chained multi-period multiplicative LMDI-II decomposition. •Energy intensity reduction is explained by the change in real energy intensity index. •This is partially offset by the behaviour of the structural index. •The attribution of Divisia indices changes gives the contribution of each commodity

  13. Affordable Freight Logistics Transport Information Management Optimisation and Asset Tracking Solution Using Smartphone GPS Capabilities

    Muna, Joseph T.; Prescott, Kevin

    2011-08-01

    Traditionally, freight transport and telematics solutions that exploit the GPS capabilities of in- vehicle devices to provide innovative Location Based Services (LBS) including track and trace transport systems have been the preserve of a select cluster of transport operators and organisations with the financial resources to develop the requisite custom software and hardware on which they are deployed. The average cost of outfitting a typical transport vehicle or truck with the latest Intelligent Transport System (ITS) increases the cost of the vehicle by anything from a couple to several thousand Euros, depending on the complexity and completeness of the solution. Though this does not generally deter large fleet transport owners since they typically get Return on Investment (ROI) based on economies of scale, it presents a barrier for the smaller independent entities that constitute the majority of freight transport operators [1].The North Sea Freight Intelligent Transport Solution (NS FRITS), a project co-funded by the European Commission Interreg IVB North Sea Region Programme, aims to make acquisition of such transport solutions easier for those organisations that cannot afford the expensive, bespoke systems used by their larger competitors.The project addresses transport security threats by developing a system capable of informing major actors along the freight logistics supply chain, of changing circumstances within the region's major transport corridors and between transport modes. The project also addresses issues of freight volumes, inter-modality, congestion and eco-mobility [2].

  14. Development of a Freight Demand Model with an Application to California

    Robert Lim

    2014-03-01

    Full Text Available This paper discusses the disaggregation of the Federal Highway Administration's Freight Analysis Framework (FAF database (version 3.0 on freight origin-destination data and the development of linear regression equations to describe the relationships between commodity-based freight trip productions/attractions to specific economic variables. Instead of generating a production/attraction equation for each commodity, commodities are grouped in certain ways to simplify model development and application. We consider three grouping methods and two model selection criteria (with and without intercepts, which are compared in terms of goodness of fit with two data sets (FAF versions 2.0 and 3.0. Furthermore, the freight generation models are validated using county-level economic data in California and applied to predict year 2015 commodity outputs. The results of this study can help city, county, metropolitan and state level planning agencies develop their own customized freight demand generation models without performing costly large-scale surveys.

  15. Shared Freight Transportation and Energy Commodities Phase One: Coal, Crude Petroleum, & Natural Gas Flows

    Chin, Shih-Miao [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hwang, Ho-Ling [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Davidson, Diane [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-07-01

    The Freight Analysis Framework (FAF) integrates data from a variety of sources to create a comprehensive picture of nationwide freight movements among states and major metropolitan areas for all modes of transportation. It provides a national picture of current freight flows to, from, and within the United States, assigns selected flows to the transportation network, and projects freight flow patterns into the future. The latest release of FAF is known as FAF4 with a base year of 2012. The FAF4 origin-destination-commodity-mode (ODCM) matrix is provided at national, state, major metropolitan areas, and major gateways with significant freight activities (e.g., El Paso, Texas). The U.S. Department of Energy (DOE) is interested in using FAF4 database for its strategic planning and policy analysis, particularly in association with the transportation of energy commodities. However, the geographic specification that DOE requires is a county-level ODCM matrix. Unfortunately, the geographic regions in the FAF4 database were not available at the DOE desired detail. Due to this limitation, DOE tasked Oak Ridge National Laboratory (ORNL) to assist in generating estimates of county-level flows for selected energy commodities by mode of transportation.

  16. Extending freight flow modelling to sub-Saharan Africa to inform infrastructure investments - trade data issues

    Jan Havenga

    2012-11-01

    Full Text Available This paper highlights the first attempt by researchers at Stellenbosch University to model freight flows between and for 17 countries in sub-Saharan Africa (SSA. The model will be informed by and linked to the South African surface Freight Demand Model (FDM given these dimensions. By analysing and collating available datasets and developing a freight flow model, a better understanding of freight movements between countries can be obtained and then used for long-term planning efforts. A simple methodology is envisaged that will entail a high-level corridor classification that links a major district in the country with a similar district in another country. Existing trade data will be used to corroborate new base-year economic demand and supply volumetric data that will be generated from social accounting matrices for each country. The trade data will also provide initial flow dynamics between countries that will be refined according to the new volumes. The model can then generate commodity-level corridor flows between SSA countries, and between SSA countries and the rest of the world, as well as intra-country rural and metropolitan flows, using a gravity-based modelling approach. This article outlines efforts to harmonise trade data between the 17 countries identified, as well as between these countries and the rest of the world as a first step towards developing a freight demand model for sub-Saharan Africa.

  17. Forecasting Dry Bulk Freight Index with Improved SVM

    Qianqian Han

    2014-01-01

    Full Text Available An improved SVM model is presented to forecast dry bulk freight index (BDI in this paper, which is a powerful tool for operators and investors to manage the market trend and avoid price risking shipping industry. The BDI is influenced by many factors, especially the random incidents in dry bulk market, inducing the difficulty in forecasting of BDI. Therefore, to eliminate the impact of random incidents in dry bulk market, wavelet transform is adopted to denoise the BDI data series. Hence, the combined model of wavelet transform and support vector machine is developed to forecast BDI in this paper. Lastly, the BDI data in 2005 to 2012 are presented to test the proposed model. The 84 prior consecutive monthly BDI data are the inputs of the model, and the last 12 monthly BDI data are the outputs of model. The parameters of the model are optimized by genetic algorithm and the final model is conformed through SVM training. This paper compares the forecasting result of proposed method and three other forecasting methods. The result shows that the proposed method has higher accuracy and could be used to forecast the short-term trend of the BDI.

  18. High freight rates hinder oil markets' return to equilibrium

    Anon

    2005-01-01

    Hurricane damage to refineries in the US has created shortages of refined products there, boosting imports and sending freight rates across the Atlantic to record levels. The situation was made worse for a time by a strike at France's main oil terminals in the Mediterranean, which prevented some oil tankers from being rapidly redeployed to routes across the Atlantic. Worldscale (WS) rates for routes from the UK and Europe to the US Atlantic and Gulf Coasts rose well above WS500 for clean tonnage during October. High rates were nevertheless not simply confined to product tankers crossing the Atlantic. Rates for crude tankers to the US have also risen, and tightness has begun to appear in some other markets as well. The net result has been to slow down the movement of oil from regions of surplus to those of scarcity, depressing prices in the former and keeping them at high levels in the latter. Atlantic tanker markets look like remaining tight for the rest of the year and perhaps beyond. (author)

  19. Volatility Spillovers in Capesize Forward Freight Agreement Markets

    Xiaoxing Gong

    2016-01-01

    Full Text Available This paper is to investigate spillovers in the Capesize forward freight agreements (FFAs markets before and after the global financial crisis. The paper chooses four Capesize voyage routes FFAs (C3, C4, C5, and C7, two time-charter routes FFAs (BCIT/C average, BPI T/C average, and spot rates as research subjects, covering the periods 3 January 2006 to 24 December 2015. This paper applies Volatility Spillover Multivariate Stochastic Volatility (VS-MSV model to analyze volatility spillover effects and estimates the parameters via software of Bayesian inference using Gibbs Sampling (BUGS, the deviance information criterion (DIC used for goodness-of-fit model. The results suggest that there are volatility spillover effects in certain Capesize FFAs routes, and the effects from spot rates to FFAs take place before crisis, yet they are bilateral after crisis. With the development of shipping markets, the correlations between FFAs and spot rate are enhanced, and it seems that the effects depend on market information and traders’ behavior. So practitioners could make decisions according to the spillovers.

  20. Freight transportation and the potential for invasions of exotic insects in urban and periurban forests of the United States

    Manuel Colunga-Garcia; Robert A. Haack; Adesoji O. Adelaja

    2009-01-01

    Freight transportation is an important pathway for the introduction and dissemination of exotic forest insects (EFI). Identifying the final destination of imports is critical in determining the likelihood of EFI establishment. We analyzed the use of regional freight transport information to characterize risk of urban and periurban areas to EFI introductions. Specifc...

  1. 76 FR 27366 - CEVA Freight, LLC, Dell Logistics Division, Including On-Site Leased Workers From Prologistix...

    2011-05-11

    ... Logistics Division, Including On-Site Leased Workers From Prologistix, Including Workers Whose Unemployment..., applicable to workers of CEVA Freight, LLC, Dell Logistics Division, including on-site leased workers from... workers employed at CEVA Freight, LLC, Dell Logistics Division, Winston-Salem, North Carolina who were...

  2. 75 FR 38128 - Ceva Freight, LLC, Dell Logistics Division, Including On-Site Leased Workers From Prologistix and...

    2010-07-01

    ... Logistics Division, Including On-Site Leased Workers From Prologistix and Employment Staffing Solutions... 19, 2010, applicable to workers of CEVA Freight, LLC, Dell Logistics Division, including on-site..., North Carolina location of CEVA Freight, LLC, Dell Logistics Division. The Department has determined...

  3. Flexibility of Freight Transport Sectors : An Exploration of Carriers’ Responses to External Pressure on Prices and Service

    Runhaar, H.A.C.; Heijden, R. van der; Kuipers, Bart

    2002-01-01

    In this paper, we explore how government policies in the field of transport may affect future freight rates, transit times, and delivery reliability. In particular, attention is paid to the ‘absorptive capacity’ of freight carriers, i.e. the extent to which they can reduce the effects of such

  4. 77 FR 24561 - Union Pacific Railroad Company-Abandonment of Freight Easement Exemption-in Alameda and Santa...

    2012-04-24

    ... Authority--Abandonment of Residual Common Carrier Obligation Exemption--in Alameda and Santa Clara Counties... freight operating easement on, and for VTA, the owner of the line, to abandon its residual common carrier... abandoned for freight rail service, but will be retained and rebuilt for future inclusion in the Bay Area...

  5. Improving Urban Freight Transport Sustainability by Carriers : Best Practices from The Netherlands and the EU Project CityLog

    Quak, H.J.

    2012-01-01

    ers face serious challenges in making their urban freight transport efficient and sustainable. Local authorities claim that many carriers are not innovative and do not cooperate in improving their city logistics operations. There are three solution directions to make urban freight transport more

  6. Lifting CERN entrepreneurs to new heights

    William Rode

    2014-01-01

    How can an international research institution help employees who wish to leave their comfort zone for the risky endeavour of starting a company? CERN encourages the creation of companies as a way of disseminating technology developed here. But what else can be done to foster these initiatives?   William Rode, a technical student in CERN’s Knowledge Transfer Group, studied spin-off creations in some leading research institutions as part of his Master's thesis in entrepreneurship at the Norwegian University of Science and Technology. William, who was offered a ticket to attend the Lift14 conference in Geneva, shares some insight into how we can support entrepreneurship at CERN: "A while ago I attended the Lift conference in Geneva. The conference explores the business and social implications of technology innovation through talks and workshops, as well as through art and discussion. Innovation is at the core of the conference and is reflected in the open-mindedness of th...

  7. Leading-edge vortex lifts swifts.

    Videler, J J; Stamhuis, E J; Povel, G D E

    2004-12-10

    The current understanding of how birds fly must be revised, because birds use their hand-wings in an unconventional way to generate lift and drag. Physical models of a common swift wing in gliding posture with a 60 degrees sweep of the sharp hand-wing leading edge were tested in a water tunnel. Interactions with the flow were measured quantitatively with digital particle image velocimetry at Reynolds numbers realistic for the gliding flight of a swift between 3750 and 37,500. The results show that gliding swifts can generate stable leading-edge vortices at small (5 degrees to 10 degrees) angles of attack. We suggest that the flow around the arm-wings of most birds can remain conventionally attached, whereas the swept-back hand-wings generate lift with leading-edge vortices.

  8. Eisenhart lift for higher derivative systems

    Galajinsky, Anton, E-mail: galajin@tpu.ru; Masterov, Ivan, E-mail: masterov@tpu.ru

    2017-02-10

    The Eisenhart lift provides an elegant geometric description of a dynamical system of second order in terms of null geodesics of the Brinkmann-type metric. In this work, we attempt to generalize the Eisenhart method so as to encompass higher derivative models. The analysis relies upon Ostrogradsky's Hamiltonian. A consistent geometric description seems feasible only for a particular class of potentials. The scheme is exemplified by the Pais–Uhlenbeck oscillator.

  9. Analysis of the Umbrella Roof for lifting

    Shaaban, A.

    1983-01-01

    In addition to supporting the dead loads and the operational loads, the Umbrella Roof (UR) has two major functions to which it was designed. First is to allow access for repair and removal of any of the TF coils, the upper PF coils and the Vacuum Vessel sections; and second, is to reproduce the exact positioning of the upper PF coils every time the UR is placed over the Tokamac. To provide these functions, the UR is designed to be lifted as one integrated structure to which the upper PF coils are attached. In order to ensure precise positioning of the UR, a redundant system of 13 guide pins were provided on the bottom of the radial beams, and four shear lugs were provided atop the central column. Mating reciprocals with very close tolerance for the guide pins were provided in the tops of the 13 peripheral columns. To meet close tolerances and to accommodate such high redundancy in match points, accurate analysis was necessary by which the center of gravity of the UR can be located and the deflection of all match points can be computed. Also stress analysis of the members of the UR was necessary because when the UR is lifted it is denied the midpoint support over the center column; and also the beams of the UR are not interconnected by moment-capable joints, thus if provisions are not made to support every radial beam, those which are not supported would yield and collapse. In this paper, the lifting schemes proposed for the UR are discussed and the results of the analysis performed for the elected scheme are presented. Also presented is a unique application of the NASTRAN code by which the center of gravity of the UR was located by allowing a refined model of the UR to swing until it came to rest under an arbitrary lift point

  10. Lift of dilogarithm to partition identities

    Terhoeven, M.

    1992-11-01

    For the whole set of dilogarithm identities found recently using the thermodynamic Bethe-Ansatz for the ADET series of purely elastic scattering theories we give partition identities which involve characters of those conformal field theories which correspond to the UV-limits of the scattering theories. These partition identities in turn allow to derive the dilogarithm identities using modular invariance and a saddle point approximation. We conjecture on possible generalizations of this correspondance, namely, a lift from dilogarithm to partition identities. (orig.)

  11. Neck lift my way: an update.

    Feldman, Joel J

    2014-12-01

    The author updates prior descriptions of an approach to the surgical neck lift that aims for a maximum degree of control over the size, shape, and position of every anatomical feature of the neck that is negatively affecting its appearance. A 38-year clinical experience guided the development of the operative tactics that define the strategy. Data collected from a records review of 522 consecutive neck lifts performed during the 10-year period 2004 through 2013 further inform the report. The approach has eight features: (1) nearly routine use of open submental access to all tissue layers of the central neck, including a regimen that curbed the problems that may attend an extensive tissue dissection; (2) management of lax neck skin by lateral excision using a specific postauricular incision, or by using the nonexcisional method of redistribution; (3) open lipectomy for precise removal of excess subcutaneous neck and jawline fat; (4) individualized modifications to subplatysmal fat, perihyoid fascia, and anterior digastric muscles; (5) treatment of large, ptotic, or malpositioned submandibular salivary glands by partial excision using a transcutaneous traction suture; (6) the current version of the corset platysmaplasty, which is used to treat static paramedian platysma muscle bands, and to avoid contour imperfections following subplatysmal maneuvers; (7) an approach that facilitates an isolated neck lift; and (8) durable results. Case examples demonstrate outcomes. Although the updated approach remains relatively complex and invasive, the author believes that the ends justify the means.

  12. Occupational lifting, fetal death and preterm birth

    Mocevic, Emina; Svendsen, Susanne Wulff; Jørgensen, Kristian Tore

    2014-01-01

    OBJECTIVE: We examined the association between occupational lifting during pregnancy and risk of fetal death and preterm birth using a job exposure matrix (JEM). METHODS: For 68,086 occupationally active women in the Danish National Birth Cohort, interview information on occupational lifting...... the JEM. We used Cox regression models with gestational age as underlying time variable and adjustment for covariates. RESULTS: We observed 2,717 fetal deaths and 3,128 preterm births within the study cohort. No exposure-response relation was observed for fetal death, but for women with a prior fetal...... death, we found a hazard ratio (HR) of 2.87 (95% CI 1.37, 6.01) for stillbirth (fetal death ≥22 completed gestational weeks) among those who lifted >200 kg/day. For preterm birth, we found an exposure-response relation for primigravid women, reaching a HR of 1.43 (95% CI 1.13, 1.80) for total loads >200...

  13. Dynamic response of Hovercraft lift fans

    Moran, D. D.

    1981-08-01

    Hovercraft lift fans are subjected to varying back pressure due to wave action and craft motions when these vehicles are operating in a seaway. The oscillatory back pressure causes the fans to perform dynamically, exhibiting a hysteresis type of response and a corresponding degradation in mean performance. Since Hovercraft motions are influenced by variations in lift fan pressure and discharge, it is important to understand completely the nature of the dynamic performance of lift fans in order to completely solve the Hovercraft seakeeping problem. The present study was performed to determine and classify the instabilities encountered in a centrifugal fan operating against time-varying back pressure. A model-scale experiment was developed in which the fan discharge was directed into a flow-measuring device, terminating in a rotating valve which produced an oscillatory back pressure superimposed upon a mean aerodynamic resistance. Pressure and local velocity were measured as functions of time at several locations in the fan volute. The measurements permitted the identification of rotating (or propagating) stall in the impeller. One cell and two cell configurations were classified and the transient condition connecting these two configurations was observed. The mechanisms which lead to rotating stall in a centrifugal compressor are presented and discussed with specific reference to Hovercraft applications.

  14. Towards Global De-Carbonization: Examining the Role of Freight Forwarders in Green Logistics in Ghana

    Kofi Wireko, Joseph; Owusu, Mavis

    2015-01-01

    The problem of carbon emission is a global phenomenon and cross-border in nature. There is almost a dearth of literature on the practice of green logistics by freight forwarders in Ghana and for that matter in most countries within the West African sub-region. This paper examines the role...... of freight forwarders in reducing carbon emissions by adopting “green logistics” as part of the global efforts in addressing global warming. The study employs a pre-test and case study method, to ensure sufficient collection of relevant material, taking into account the lack of research in this subject...... in Ghana. Materials obtained from the interviews and the questionnaires were used to explore the knowledge of employees regarding green logistics, examine the challenges in implementing green logistics, and assess the internal and external pressures that impact on freight forwarders and the needed...

  15. Modeling Freight Ocean Rail and Truck Transportation Flows to Support Policy Analyses

    Gearhart, Jared Lee [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wang, Hao [Cornell Univ., Ithaca, NY (United States); Nozick, Linda Karen [Cornell Univ., Ithaca, NY (United States); Xu, Ningxiong [Cornell Univ., Ithaca, NY (United States)

    2017-11-01

    Freight transportation represents about 9.5% of GDP, is responsible for about 8% of greenhouse gas emissions and supports the import and export of about 3.6 trillion in international trade; hence it is important that our national freight transportation system is designed and operated efficiently and embodies user fees and other policies that balance costs and environmental consequences. Hence, this paper develops a mathematical model to estimate international and domestic freight flows across ocean, rail and truck modes which can be used to study the impacts of changes in our infrastructure as well as the imposition of new user fees and changes in operating policies. This model is applied to two case studies: (1) a disruption of the maritime ports at Los Angeles/Long Beach similar to the impacts that would be felt in an earthquake; and (2) implementation of new user fees at the California ports.

  16. Robust optimization model and algorithm for railway freight center location problem in uncertain environment.

    Liu, Xing-Cai; He, Shi-Wei; Song, Rui; Sun, Yang; Li, Hao-Dong

    2014-01-01

    Railway freight center location problem is an important issue in railway freight transport programming. This paper focuses on the railway freight center location problem in uncertain environment. Seeing that the expected value model ignores the negative influence of disadvantageous scenarios, a robust optimization model was proposed. The robust optimization model takes expected cost and deviation value of the scenarios as the objective. A cloud adaptive clonal selection algorithm (C-ACSA) was presented. It combines adaptive clonal selection algorithm with Cloud Model which can improve the convergence rate. Design of the code and progress of the algorithm were proposed. Result of the example demonstrates the model and algorithm are effective. Compared with the expected value cases, the amount of disadvantageous scenarios in robust model reduces from 163 to 21, which prove the result of robust model is more reliable.

  17. Robust Optimization Model and Algorithm for Railway Freight Center Location Problem in Uncertain Environment

    Xing-cai Liu

    2014-01-01

    Full Text Available Railway freight center location problem is an important issue in railway freight transport programming. This paper focuses on the railway freight center location problem in uncertain environment. Seeing that the expected value model ignores the negative influence of disadvantageous scenarios, a robust optimization model was proposed. The robust optimization model takes expected cost and deviation value of the scenarios as the objective. A cloud adaptive clonal selection algorithm (C-ACSA was presented. It combines adaptive clonal selection algorithm with Cloud Model which can improve the convergence rate. Design of the code and progress of the algorithm were proposed. Result of the example demonstrates the model and algorithm are effective. Compared with the expected value cases, the amount of disadvantageous scenarios in robust model reduces from 163 to 21, which prove the result of robust model is more reliable.

  18. Nuclear critical safety analysis for UX-30 transport of freight package

    Quan Yanhui; Zhou Qi; Yin Shenggui

    2014-01-01

    The nuclear critical safety analysis and evaluation for UX-30 transport freight package in the natural condition and accident condition were carried out with MONK-9A code and MCNP code. Firstly, the critical benchmark experiment data of public in international were selected, and the deflection and subcritical limiting value with MONK-9A code and MCNP code in calculating same material form were validated and confirmed. Secondly, the neutron efficiency multiplication factors in the natural condition and accident condition were calculated and analyzed, and the safety in transport process was evaluated by taking conservative suppose of nuclear critical safety. The calculation results show that the max value of k eff for UX-30 transport freight package is less than the subcritical limiting value, and the UX-30 transport freight package is in the state of subcritical safety. Moreover, the critical safety index (CSI) for UX-30 package can define zero based on the definition of critical safety index. (authors)

  19. Measurement of CO2 emissions from road freight transport: A review of UK experience

    McKinnon, A.C.; Piecyk, M.I.

    2009-01-01

    It is possible to estimate CO 2 emissions from road freight transport in different ways, depending on the definition of trucking activity, the degree of reliance on survey, vehicle test-cycle and traffic count data and the geographical scope of the calculation. The emergence of differing road freight-related CO 2 estimates from official sources and revisions to statistical series can frustrate the policy-making process and erode the confidence of industry stakeholders in the validity of the figures. Using UK data, this paper examines the various methods of carbon auditing road freight transport at the national level and compares the results both for a single year (2006) and over a time period. It highlights a series of statistical anomalies and approximations and tries to explain discrepancies that have arisen in the UK data sets. A concluding section considers the general lessons that can be learned from the recent UK experience in this field.

  20. Masculinity and Lifting Accidents among Danish Ambulance Personnel

    Hansen, Claus D.; Nielsen, Kent J

    Background Work injuries related to lifting are the most prevalent among ambulance personnel (AP) despite the introduction of ‘assistive technologies’ (AT) that help reduce situations of manual lifting. One third of the AP report using AT only ‘sometimes’ and 10% report having lifted a patient...... alone. Aim This presentation investigates whether failure to use AT is linked to male ambulance workers’ gender identity? Is lifting patients alone a way of performing masculinity for AP’s? Method Data is taken from MARS, a panel study of AP workers in Denmark (n = 1606). Information from questionnaires...... measuring traditional male role norms (MRNI), safety attitudes and safety behavior will be linked to company register information on work injuries categorized as lifting accidents. Logistic regression is used to analyse associations between masculinity, lifting behavior, and lifting accidents. Results...

  1. Study on dynamic lifting characteristics of control rod drive mechanism

    Shen Xiaoyao

    2012-01-01

    Based on the equations of the electric circuit and the magnetic circuit and analysis of the dynamic lifting process for the control rod drive mechanism (CRDM), coupled magnetic-electric-mechanical equations both for the static status and the dynamic status are derived. The analytical method is utilized to obtain the current and the time when the lift starts. The numerical simulation method of dynamic analysis recommended by ASME Code is utilized to simulate the dynamic lifting process of CRDM, and the dynamic features of the system with different design gaps are studied. Conclusions are drawn as: (1) the lifting-start time increases with the design gap, and the time for the lifting process is longer with larger gaps; (2) the lifting velocity increases with time; (3) the lifting acceleration increases with time, and with smaller gaps, the impact acceleration is larger. (author)

  2. Climate change, productivity shocks and demand for freight ground transportation in Atlantic Canada

    Yevdokimov, Y. |; New Brunswick Univ., Fredericton, NB; Byelyayev, O.

    2005-01-01

    A study was conducted to determine the impacts of climate change on the transportation sector in a regional context. The purpose was to analyze potential climate change impacts on demand for freight transportation in Atlantic Canada through its association with other sectors of the regional economy. Freight transportation is designed to meet transportation demands of commodity producers who must deliver their goods to final users. Since it is a by-product of profit maximization and cost minimization by producers of all types of commodities in various sectors of the economy, this study modelled climate change impacts as productivity shocks in relevant sectors of the economy. A computerized simulation was then used to determine how the consequences of these shocks influence the demand for freight transportation. This was accomplished by collecting climate related data in Atlantic Canada as well as aggregate economic data that reflects the economic performance of the regional economy. A growth model that links regional economy to freight transportation was then developed and different scenarios for future developments associated with climate change impacts were evaluated. Computer simulation with Mathcad-8 showed that the conditions specified in the best-case scenario, expected-case scenario and worst-case scenario resulted in a cumulative loss in demand for ground freight transportation of 7.213, 582.127 and 610.92 billion tonne-kilometers respectively, over the 2001-2100 period. In general, the results of the computer simulation demonstrated a considerable decrease in the demand for ground freight transportation in Atlantic Canada resulting from climate change impacts. The loss in demand was found to occur mostly in the first half of this century, with some recovery in the second half because the economic system would adapt to new climate conditions. It was recommended that policy instruments such as regulations or taxes, should be put in place to reduce the impacts

  3. Application of an Intelligent Fuzzy Regression Algorithm in Road Freight Transportation Modeling

    Pooya Najaf

    2013-07-01

    Full Text Available Road freight transportation between provinces of a country has an important effect on the traffic flow of intercity transportation networks. Therefore, an accurate estimation of the road freight transportation for provinces of a country is so crucial to improve the rural traffic operation in a large scale management. Accordingly, the focused case study database in this research is the information related to Iran’s provinces in the year 2008. Correlation between road freight transportation with variables such as transport cost and distance, population, average household income and Gross Domestic Product (GDP of each province is calculated. Results clarify that the population is the most effective factor in the prediction of provinces’ transported freight. Linear Regression Model (LRM is calibrated based on the population variable, and afterwards Fuzzy Regression Algorithm (FRA is generated on the basis of the LRM. The proposed FRA is an intelligent modified algorithm with an accurate prediction and fitting ability. This methodology can be significantly useful in macro-level planning problems where decreasing prediction error values is one of the most important concerns for decision makers. In addition, Back-Propagation Neural Network (BPNN is developed to evaluate the prediction capability of the models and to be compared with FRA. According to the final results, the modified FRA estimates road freight transportation values more accurately than the BPNN and LRM. Finally, in order to predict the road freight transportation values, the reliability of the calibrated models is analyzed using the information of the year 2009. Results show higher reliability for the proposed modified FRA.

  4. How to lift a box that is too large to fit between the knees

    Kingma, I.; Faber, G.S.; van Dieen, J.H.

    2010-01-01

    Many studies compared lifting techniques such as stoop and squat lifting. Results thus far show that when lifting a wide load, high back loads result, irrespective of the lifting technique applied. This study compared four lifting techniques in 11 male subjects lifting wide loads. One of these

  5. The Effects of the Emission Cost on Route Choices of International Container Ships

    Hyangsook Lee

    2016-01-01

    Full Text Available Maritime freight shipping has increased significantly and air pollution from international ships has grown accordingly, having serious environmental effects all over the world. This paper analyzes the effects of the emission cost on ocean route choices, focusing on international container ships. First, the paper formulates a freight network model that captures decisions and interactions of ocean carriers and port terminal operators in the maritime freight transport system. Then, the emission cost is calculated based on an activity-based approach as a component of the ocean transportation cost function. A case study is examined to find if the emission cost affects ocean route choices. The results indicate that the optimal ocean route and transportation cost are changed distinctively due to the emission cost. The research discusses how the emission cost plays a role in route changes and why ocean carriers have to consider these costs in their routing decisions.

  6. Operational freight carrier planning basic concepts, optimization models and advanced memetic algorithms

    Schönberger, Jörn

    2005-01-01

    The modern freight carrier business requires a sophisticated automatic decision support in order to ensure the efficiency and reliability and therefore the survival of transport service providers. This book addresses these challenges and provides generic decision models for the short-term operations planning as well as advanced metaheuristics to obtain efficient operation plans. After a thorough analysis of the operations planning in the freight carrier business, decision models are derived. Their suitability is proven within a large number of numerical experiments, in which a new class of hybrid genetic search approaches demonstrate their appropriateness.

  7. On the stick-slip vibration in the suspension of a freight wagon

    Mazilu Traian

    2017-01-01

    Full Text Available Damping based on the dry friction is frequently in suspensions of the freight wagons. The paper presents some aspects of vertical vibration of freight wagons. It uses a simple model considering that the vehicle was reduced to a mass suspended on a wheel, moving at constant speed on a rigid track with harmonic irregularity. Stick-slip vibration can occur due to the friction and it is characterized by sudden changes in the wheel acceleration affecting the ride quality. The paper shows the influence of stick-slip vibration on the wheel-rail dynamic force.

  8. Navigating through torpedo attacks and enemy raiders: Merchant shipping and freight rates during World War I

    Klovland, Jan Tore

    2017-01-01

    During World War I ocean freight rates rose to extraordinary levels. Using a new monthly dataset it is shown that freight rates can be well explained by economic activity, commodity prices, war risk and world tonnage in the period 1912 to 1916. In the first two years of the war part of the British merchant eet was directly controlled by the Government but neutral shipping was basically free to operate as normal. In this period neutral shipping accounted for about one third of British impo...

  9. Involving Freight Transport Actors in Production of Knowledge - Experience with Future Workshop Methodology

    Jespersen, Per Homann; Drewes, Lise

    2005-01-01

    the experience and knowledge of actors in the freight transport sector are included directly in a scientific process in order to develop future and strategic studies. Future research is often produced as desktop research and presented as the results of scientists’ forecasting and scenario building...... in the format of a future workshop included freight transport stakeholders in the research process in order to produce knowledge meeting scientific quality criteria and at the same time in a form suitable for improving the problem solving capabilities of the participants....

  10. Lift on side by side intruders of various geometries within a granular flow

    Acevedo-Escalante, M. F.; Caballero-Robledo, G. A.

    2017-06-01

    Obstacles within fluids have been widely used in engineering and in physics to study hydrodynamic interactions. In granular matter, objects within a granular flow have helped to understand fundamental features of drag and lift forces. In our group, we have studied numerically the flow mediated interaction between two static disks within a vertical granular flow in a two-dimensional container where the flow velocity and the distance between obstacles were varied. Attractive and repulsive forces were found depending on flow velocity and separation between intruders. The simulations evidenced a relationship between the average flow velocity in a specific section ahead of the obstacles and the attractive-repulsive lift. On the other hand, it was showed that the lift force on an object dragged within a granular medium depends on the shape of the intruder. Here we present experimental results of the interaction between two side-by-side intruders of different shapes within a vertical granular flow. We built a quasi-two-dimensional container in which we placed the intruders and using load cells we measured lift and drag forces during the discharge process for different flow velocities.

  11. Streamlining Transportation Corridor Planning Processess: Freight and Traffic Information

    Franzese, Oscar [ORNL

    2010-08-01

    The traffic investigation is one of the most important parts of an Environmental Impact Statement of projects involving the construction of new roadway facilities and/or the improvement of existing ones. The focus of the traffic analysis is on the determination of anticipated traffic flow characteristics of the proposed project, by the application of analytical methods that can be grouped under the umbrella of capacity analysis methodologies. In general, the main traffic parameter used in EISs to describe the quality of traffic flow is the Level of Service (LOS). The current state of the practice in terms of the traffic investigations for EISs has two main shortcomings. The first one is related to the information that is necessary to conduct the traffic analysis, and specifically to the lack of integration among the different transportation models and the sources of information that, in general, reside in GIS databases. A discussion of the benefits of integrating CRS&SI technologies and the transportation models used in the EIS traffic investigation is included. The second shortcoming is in the presentation of the results, both in terms of the appearance and formatting, as well as content. The presentation of traffic results (current and proposed) is discussed. This chapter also addresses the need of additional data, in terms of content and coverage. Regarding the former, other traffic parameters (e.g., delays) that are more meaningful to non-transportation experts than LOS, as well as additional information (e.g., freight flows) that can impact traffic conditions and safety are discussed. Spatial information technologies can decrease the negative effects of, and even eliminate, these shortcomings by making the relevant information that is input to the models more complete and readily available, and by providing the means to communicate the results in a more clear and efficient manner. The benefits that the application and use of CRS&SI technologies can provide to

  12. Comparative economic efficiency, operating costs and fuel consumption rates of freight transport modes between the largest industrial cities and seaports in South Africa

    W J (Wessel Pienaar

    2013-09-01

    Full Text Available The paper deals with aspects of efficiency within the five modes of freight transport, with special reference to the operating cost and fuel consumption rates between South Africa’s largest industrial cities and seaports. In particular, the paper deals with (a the opportunities that exist for the achievement of efficiency in freight transport; (b the subgroups of economies that can enhance efficiency attainment in the freight transport industry; (c prevailing cost structures, operating cost and fuel consumption rates within the five modes of freight transport; and (d the salient economic features of the freight transport market. The research approach and methodology combine (a a literature survey; (b empiric research, (c an analysis of the cost structures of freight transport operators from different modes of transport; and (d interviews conducted with specialists in the freight transport industry.

  13. A walker used as a lifting device.

    Glimskär, Bo; Hjalmarson, Jenny; Lundberg, Stefan; Larsson, Tore

    2014-05-01

    To develop assistive technology that would help an older person to arise from a kneeling position to a standing one. Developing a prototype, based on an inclusive design and then testing the prototype to verify the approach. The prototype was subsequently tested by a panel of 20 elderly users. These tests were observed and filmed. Participants' experiences of being lifted with the elevation seat were registered with the VIDAR ergonomic assessment system. None of the 20 participants used a walker at that time. In response to a question of whether, assuming they might have to use a walker in the future, they thought that a walker with an elevating seat would be helpful, 18 said that it would. Two of the participants did not believe that they would ever have to use a walker. A simple assistive technology such as a walker equipped with an elevating seat would in many of these cases simplify matters and reduce the distress of people who fall often. In addition, such a device can allow people who fall often to live in their homes longer. For caregivers dealing frequently with people who fall, this assistive device can contribute to decreasing occupational injuries. Development of a lifting device that can help people raise themselves up entirely on their own, or with minimal assistance, would be a revolutionary step for the individual. Lifting devices in use today requires much more extensive assistance from home helpers or others and due to the risk of injuries it is a great value for the helpers that easy to use devices develops. A walker equipped with an elevating seat could even provide a potential for people to stay in their homes longer.

  14. Transport of solid commodities via freight pipeline: freight pipeline technology. Volume II. First year final report. [Slurry, pneumatic, pneumo-capsule, and hydro-capsule

    Zandi, I.; Gimm, K.K.

    1976-07-01

    In order to determine the feasibility of pipeline as an intercity freight transportation mode, it was necessary to examine its technological feasibility and reliability. This report describes the technology of the major generic freight pipelines in terms of both historical and current trends and operations. Additionally, it presents a state-of-the-art review of calculating energy requirements of various generic freight pipelines. It was concluded that slurry and pneumatic pipelines are technologically feasible and reliable. There are many commercial installations of both types operating around the world. Based on European experience with pneumo-capsule pipelines for mail delivery and Russian gravel- and sand-transport installations, it appears that a pneumo-capsule pipeline is a technologically feasible and operationally reliable mode for transport of solids. Since no commercial pneumo-capsule pipeline installations yet exist in the U.S., it seems desirable that a service demonstration of the advantages and feasibility of this mode of transport be undertaken to attract the shippers' confidence. Hydro-capsule pipelines are technologically feasible, but its reliability within a commercial environment remains to be tested.

  15. An elevator for lifting and turning pipes

    Melnikov, S.P.; Borchenkov, G.I.; Komarov, V.N.; Lebedev, D.A.

    1983-01-01

    An elevator is proposed for lifting and turning pipes, which includes a body and a bushing hinged to it with projections and a shank with a threaded adapter and cams which interact with the projections of the bushing. In order to increase the operational safety of the device through ensuring the capability of eliminating drops in the torque from the shank to the body when raising and extracting drill pipes, the body is equipped with eccentric cams rigidly connected to it, while the shank is equipped with a ring movable connected with it. The eccentric cams are installed between the bushing and the body with the capability of interacting with the shank ring.

  16. Safety mechanism of a lifting machine

    Blaive, D.; Chopinet, E.

    1985-01-01

    The lifting machine has at least one winch supporting a chain which passes around a chain pulley in a roller block attached to the load. At least one locking mechanism prevents the rotation of the pulley within the block. The locking mechanism can moves between an out-of-operation position and a locking position. A control system includes load sensors associated with the winch sensing the weight of the load acting through the chain. If one part of the chain should break, the load sensors detect this, and the locking mechanism is activated. The invention applies, more particularly, to the handling winches in a fast neutron nuclear power plant [fr

  17. Uranium hexafluoride container design no. 0236

    1976-02-01

    The specification covers the construction of the mild steel container complete with cover, sealing ring, sealing plug and with mild steel skirt and lifting lug welded on as shown. It specifies in detail only those factors essential to the maintenance of interchangeability on the plant between containers supplied by different manufacturers. (U.K.)

  18. A review of some critical assumptions in the relationship between economic activity and freight transport

    Fosgerau, Mogens; Kveiborg, Ole

    2004-01-01

    A number of conversion factors are often needed when projecting freight transport growth, depending on the level of detail of the projection. Here we investigate conversion factors that convert production in fixed prices in different industries into production of different commodities and further...

  19. A Review of some Critical Assumptions in the Relationship between Economic Activity and Freight Transport

    Fosgerau, Mogens; Kveiborg, Ole

    2004-01-01

    A number of conversion factors are often needed when projecting freight transport growth, depending on the level of detail of the projection. Here we investigate conversion factors that convert production in fixed prices in different industries into production of different commodities and further...

  20. Electric Road Systems: Strategic Stepping Stone on the Way towards Sustainable Freight Transport?

    Jesko Schulte

    2018-04-01

    Full Text Available Electrification of the transport sector has been pointed out as a key factor for tackling some of today’s main challenges, such as global warming, air pollution, and eco-system degradation. While numerous studies have investigated the potential of electrifying passenger transport, less focus has been on how road freight transport could be powered in a sustainable future. This study looks at Electric Road Systems (ERS in comparison to the current diesel system. The Framework for Strategic Sustainable Development was used to assess whether ERS could be a stepping stone on the way towards sustainability. Strategic life-cycle assessment was applied, scanning each life-cycle phase for violations against basic sustainability principles. Resulting sustainability “hot spots” were quantified with traditional life-cycle assessment. The results show that, if powered by renewable energy, ERS have a potential to decrease the environmental impact of freight transport considerably. Environmental payback times of less than five years are achievable if freight traffic volumes are sufficiently high. However, some severe violations against sustainability principles were identified. Still, ERS could prove to be a valuable part of the solution, as they drastically decrease the need for large batteries with high cost and sustainability impact, thereby catalyzing electrification and the transition towards sustainable freight transport.

  1. 75 FR 10476 - Interim Change to the Military Freight Traffic Unified Rules Publication (MFTURP) No. 1

    2010-03-08

    ... DEPARTMENT OF DEFENSE Department of the Army Interim Change to the Military Freight Traffic Unified Rules Publication (MFTURP) No. 1 AGENCY: Department of the Army, DoD. SUMMARY: The Military... Eustis, VA 23604-1644. Request for additional information may be sent by e-mail to: [email protected]us...

  2. 76 FR 17841 - Interim Change to the Military Freight Traffic Unified Rules Publication (MFTURP) No. 1

    2011-03-31

    ... DEPARTMENT OF DEFENSE Department of the Army Interim Change to the Military Freight Traffic Unified Rules Publication (MFTURP) No. 1 AGENCY: Department of the Army, DoD. SUMMARY: The Military..., Scott AFB 62225. Request for additional information may be sent by e-mail to: [email protected]us.army.mil...

  3. 75 FR 60436 - Interim Change to the Military Freight Traffic Unified Rules Publication (MFTURP) No. 1

    2010-09-30

    ... DEPARTMENT OF DEFENSE Department of the Army Interim Change to the Military Freight Traffic Unified Rules Publication (MFTURP) No. 1 AGENCY: Department of the Army, DoD. SUMMARY: The Military.... Request for additional information may be sent by e-mail to: [email protected]us.army.mil or [email protected]us...

  4. 75 FR 36643 - Interim Change to the Military Freight Traffic Unified Rules Publication (MFTURP) No. 1

    2010-06-28

    ... DEPARTMENT OF DEFENSE Department of the Army Interim Change to the Military Freight Traffic Unified Rules Publication (MFTURP) No. 1 AGENCY: Department of the Army, DoD. ACTION: Notice. SUMMARY: The...-mail to: [email protected]us.army.mil or [email protected]us.army.mil . FOR FURTHER INFORMATION CONTACT: Mr...

  5. 75 FR 24667 - Interim Change to the Military Freight Traffic Unified Rules Publication (MFTURP) No. 1

    2010-05-05

    ... DEPARTMENT OF DEFENSE Department of the Army Interim Change to the Military Freight Traffic Unified Rules Publication (MFTURP) No. 1 AGENCY: Department of the Army, DoD. SUMMARY: The Military... information may be sent by e-mail to: [email protected]us.army.mil or [email protected]us.army.mil . FOR FURTHER...

  6. 76 FR 776 - Interim Change to the Military Freight Traffic Unified Rules Publication (MFTURP) NO. 1

    2011-01-06

    ... DEPARTMENT OF DEFENSE Department of the Army Interim Change to the Military Freight Traffic Unified Rules Publication (MFTURP) NO. 1 AGENCY: Department of the Army, DoD. SUMMARY: The Military.... Request for additional information may be sent by e-mail to: [email protected]us.army.mil or [email protected]us...

  7. Opportunities for Improving the Energy Efficiency of Multi-Modal Intra-City Freight Movement

    Walkowicz, Kevin; Duran, Adam

    2017-07-06

    This poster focuses on the National Renewable Energy Laboratory's analysis of opportunities for freight movement energy savings via optimization and integration of existing/emerging intra-city goods delivery modes as well as an assessment of the efficacy and energy consumption impact of new technologies.

  8. Improving marketing strategies of sea freight forwarding services - Thien Hong Joint Stock company

    Pham, Thanh Huyen

    2015-01-01

    Analyzing and improving marketing strategies of Thien Hong Joint Stock company - a newborn company in the field of sea freight forwarding service in Vietnam. This thesis focused on the 4Ps (product, price, placement, promotion) in marketing strategy, how to apply the theory of services marketing in a business to business company and a special industry effectively.

  9. Online Systems for Oversize and Overweight Freight Permitting and Motor Carrier Credentialing : Transportation Research Synthesis.

    2017-09-01

    MnDOT uses two online systems implemented in the 1990s to issue and manage permits for oversize/overweight (OS/OW) freight and motor carrier credentials: - RouteBuilder, an OS/OW permitting system with a routing component. - Motor Carrier Information...

  10. New SP-values of time and reliability for freight transport in the Netherlands

    Jong, G. de; Kouwenhoven, M.; Bates, J.; Koster, P.; Verhoef, E.; Tavasszy, L.; Warffemius, P.

    2014-01-01

    This paper discusses the methods used in a study on the values of time and reliability in freight transport in the Netherlands. SP surveys were carried out among more than 800 shippers and carriers. A novel feature is that both for the value of time and reliability two additive components are

  11. 76 FR 59119 - Interim Change to the Military Freight Traffic Unified Rules Publication (MFTURP) No. 1

    2011-09-23

    ... Unified Rules Publication (MFTURP) No. 1 AGENCY: Department of the Army, DoD. SUMMARY: The Military... Publication and Rules Manager, Strategic Business Directorate, Business Services, 1 Soldier Way, Building...: Military Freight Traffic Unified Rules Publications (MFTURP) No. 1. Background: The MFTURP No. 1 governs...

  12. Recent developments in national and international freight transport models within Europe

    Jong, G. de; Vierth, I.; Tavasszy, L.; Ben-Akiva, M.

    2013-01-01

    The past decade has seen many new freight transport models for use in transport planning by public authorities. Some of these models have developed new concepts, such as logistics modules, inclusion of transshipments, storage and sourcing and the determination of shipment size. This paper provides a

  13. [Coping strategy and its effect on occupational stress among rail freight dispatchers].

    Gu, Gui-zhen; Yu, Shan-fa; Li, Kui-rong; Jiang, Kai-you

    2010-08-01

    To analyse the relationship between coping strategy and occupational stress in rail freight dispatchers. 115 rail freight dispatchers were investigated by using group sampling method, investigation contents included coping strategies, occupational stressors, strains and personalities. The proportion of using coping strategy in rail freight dispatchers is lower. The scores of job future ambiguity, type A behavior and work locus of control in workers with insufficient coping strategy were higher than those in workers with sufficient strategy (P family balance, job involvement coping factors of coping strategy were remarkable significant (P 0.05). Logistic regression analysis showed that risk of being job dissatisfaction and daily life stress in workers with insufficient social support coping was three or four times than those with sufficient coping (OR = 3.06 or 4.38, respectively), risk of being daily life stress in workers with insufficient job involvement coping was three times than those with sufficient coping (OR = 3.26). The proportion of using coping strategy in rail freight dispatchers is lower. Coping strategy has influence on the individual's perception of occuaptional stressors, strains and personalities.

  14. CargoCBM – Feature Generation and Classification for a Condition Monitoring System for Freight Wagons

    Gericke, C; Hecht, M

    2012-01-01

    Despite the fact that rail freight transport is one of the most environmentally friendly matters of transport, its growth has been far behind the growth of freight transport in general. Studies showed that a competitive disadvantage is caused by a low availability of rolling stock, especially freight wagons. Changing from a time based to a condition based maintenance strategy is believed to decrease down times by at least one third. To make condition based maintenance for freight wagons possible the TU Berlin and five industry partners started the research project CargoCBM. One task in this project is to develop algorithms for the automatic on-board diagnosis of wheel flats. The focus of the work is on the process of feature generation and feature selection as well as the application of different classifiers to automatically evaluate the data. Based on the results of measured data, features were selected and tested with different classifiers. Thought advanced classifiers such as neural networks have been analysed in accordance to their classification accuracy. It can be shown that with carefully constructed and selected features comparatively simple classifiers can lead to excellent results.

  15. The impact of Pulpwood Rail Freight Costs on the Minnesota-Wisconsin Pulpwood Market

    David C. Lothner

    1976-01-01

    Transportation costs affect the marketing and utilization of pulpwood. Their impact on the procurement and utilization of pulpwood often prove difficult to measure because deriving an average annual measure of the transportation cost is difficult. This note, by means of a simple index method for measuring regional interstate pulpwood rail freight costs, illustrates...

  16. The economic performance of supply chain(s) served by the mega freight transport vehicles

    Janic, M.

    2014-01-01

    This paper deals with the economic performances of supply chain(s) served by different including the mega freight transport vehicles. These performances are considered as a dimension of the supply chain’s sustainability together with the infrastructural, technical/technological, operational,

  17. Dynamics of two-axle railway freight wagons with UIC standard suspension

    Hoffmann, Mark; True, Hans

    2006-01-01

    The dynamics of two different two-axle railway freight wagons is investigated theoretically and compared. Fully nonlinear models are considered. The hysteresis from dry friction and the effect of impacts between elements of the suspension are included. Bifurcation diagrams are shown in order...

  18. The dynamics of European two-axle railway freight wagons with UIC standard suspension

    Hoffmann, Mark; True, Hans

    2008-01-01

    The dynamics of two-axle railway freight wagons with the UIC standard Suspension is investigated theoretically and the dynamic behaviour is explained. Fully nonlinear models are considered. The hysteresis from dry friction and the effect of impacts between elements of the suspension are included...

  19. Assessing links between energy consumption, freight transport, and economic growth: evidence from dynamic simultaneous equation models.

    Nasreen, Samia; Saidi, Samir; Ozturk, Ilhan

    2018-06-01

    We investigate this study to examine the relationship between economic growth, freight transport, and energy consumption for 63 developing countries over the period of 1990-2016. In order to make the panel data analysis more homogeneous, we apply the income level of countries to divide the global panel into three sub-panels, namely, lower-middle income countries (LMIC), upper-middle income countries (UMIC), and high-income countries (HIC). Using the generalized method of moments (GMM), the results prove evidence of bidirectional causal relationship between economic growth and freight transport for all selected panels and between economic growth and energy consumption for the high- and upper-middle income panels. For the lower-middle income panel, the causality is unidirectional running from energy consumption to economic growth. Also, the results indicate that the relationship between freight transport and energy use is bidirectional for the high-income countries and unidirectional from freight transport to energy consumption for the upper-middle and lower-middle income countries. Empirical evidence demonstrates the importance of energy for economic activity and rejects the neo-classical assumption that energy is neutral for growth. An important policy recommendation is that there is need of advancements in vehicle technology which can reduce energy intensity from transport sector and improve the energy efficiency in transport activity which in turn allows a greater positive role of transport in global economic activity.

  20. An Overview of Problems and Solutions for Urban Freight Transport in Brazilian Cities

    Leise K. Oliveira

    2018-04-01

    Full Text Available Urban freight transport is a challenge for Brazilian cities due to the lack of adequate planning for freight flow movement. Public managers also show negligence and a lack of awareness when dealing with urban logistics. Decision-support data on urban freight transport are still scarce, despite being of fundamental value to economic development. With this in mind, this paper presents problems and solutions regarding urban freight transport in Brazilian cities. Data were obtained through a survey conducted in nine cities and analysed by means of descriptive statistics and the successive intervals method. Additionally, a cluster analysis was performed to identify patterns regarding the typical characteristics of each city in order to compare and generalise the perception of retailers regarding problems and solutions at the national level. The results indicate divergent opinions among retailers from different cities, even from cities with similar socioeconomic profiles and urban dynamics. The municipalities which demonstrated the most similarities were (i Betim and Niteroi, in the Southeast of Brazil; (ii Palmas and Quixada, in the North and Northeast, respectively; and (iii Palmas and Caruaru, also in the North and Northeast. The results reinforce the importance of studying the local context and involving stakeholders in the process of planning urban logistics solutions.

  1. Resisting momentum in the abutment to rotating of freight car bogie

    Pavels GAVRILOVS

    2008-01-01

    Full Text Available On the Latvian railway, derailments of freight cars take place in the course of shunting work on marshalling yards. A number of factors during shunting work on marshalling yards may contribute to the derailments of rolling stock: longitudinal dynamics during braking of cars with the turned off brakes by locomotive, hauling down cars from a marshalling hill with braking position controlled by an operator, dry internal rails in curves, absence of greasing in the pivot unit of freight bogies. At present, measures allowing elimination of the car derailments during shunting work are developed.During the period between repairs, the abutment unit of freight car often works in conditions of dry friction. Our observations suggest that at the time of taking a car into repair, there is often an absence of greasing between trail bearing and center plate of the abutment, and a presence of sandy dust. It increases a friction and, together with high contact pressures and dynamic influence, hinders the turn of bogie at motion of car.In this paper, the results of studying the resisting moment in the abutment to turning of bogie is reported. The study was conducted on the basis of freight bogie of type 18-100; the body was leant on the center plate unit of the abutment, on the center plate unit, and on the sliders. Experiments were conducted, with the use of greasing and at the dry friction of center plate unit.

  2. Commodity-based Approach for Evaluating the Value of Freight Moving on Texas’ Roadway Network

    2017-12-10

    The researchers took a commodity-based approach to evaluate the value of a list of selected commodities moved on the Texas freight network. This approach takes advantage of commodity-specific data sources and modeling processes. It provides a unique ...

  3. Estimation of warehouse throughput in freight transport demand model for the Netherlands

    Davydenko, I.; Tavasszy, L.

    2013-01-01

    This paper presents an extension of the classical four-step freight modeling framework with a logistics chain model. Modeling logistics at the regional level establishes a link between trade flow and transport flow, allows the warehouse and distribution center locations and throughput volumes to be

  4. Model of informational system for freight insurance automation based on digital signature

    Maxim E. SLOBODYANYUK

    2009-01-01

    In the article considered a model of informational system for freight insurance automation based on digital signature, showed architecture, macro flowchart of information flow in model, components (modules) and their functions. Described calculation method of costs on interactive cargo insurance via proposed system, represented main characteristics and options of existing transport management systems, conceptual cost models.

  5. Model of informational system for freight insurance automation based on digital signature

    Maxim E. SLOBODYANYUK

    2009-01-01

    Full Text Available In the article considered a model of informational system for freight insurance automation based on digital signature, showed architecture, macro flowchart of information flow in model, components (modules and their functions. Described calculation method of costs on interactive cargo insurance via proposed system, represented main characteristics and options of existing transport management systems, conceptual cost models.

  6. Integrated strategies to address emerging freight and delivery challenges in New York City : final report.

    2017-01-01

    This report has three critical objectives. First, to highlight the changing nature of freight deliveries even as zoning policy for off-street loading has changed little over the last 65 years. Second, to consider policy and physical approaches to add...

  7. 78 FR 78470 - Registration and Financial Security Requirements for Freight Forwarders; International...

    2013-12-26

    ...). See, e.g., Motor Carrier Financial Information Reporting Requirements-Request for Public Comments, 68...] Registration and Financial Security Requirements for Freight Forwarders; International Association of Movers... FURTHER INFORMATION CONTACT: Mr. Thomas Yager, Chief of Driver and Carrier Operations, (202) 366-4001 or...

  8. Rail freight vibration impact sleep and community response: An overview of CargoVibes

    Persson Waye, K.; Janssen, S.A.; Waddington, D.; Groll, W.; Croy, I.; Hammar, O.; Koopman, A.; Moorhouse, A.; Peris, E.; Sharp, C.; Sica, G.; Smith, M.G.; Vos, H.; Woodcock, J.; Ogren, M.

    2014-01-01

    The European Union funded project: CargoVibes involving ten partners from eight nations has aimed to examine ground-borne vibration affecting residents close to freight railway lines. The paper presents an overview of the work package investigating human response to vibration, with particular focus

  9. An analysis of how developments in the packaging industry will influence the dimensions of freight carriers

    Niels Meijer; Stef Weijers; Reinder Pieters; Jan Jansen; Allan Woodburn

    2011-01-01

    To what extent will trends in the packaging industry determine or influence the future dimensions of freight carriers? In this study we have identified these trends and studied the possible impact on the sizes of the truck of the future. It was part of a dissertation for the MSc programme in

  10. Trends of energy efficiency in Finnish road freight transport 1995-2009 and forecast to 2016

    Liimatainen, Heikki; Poellaenen, Markus [Department of Business Information Management and Logistics, Tampere University of Technology, P.O. Box 541, 33101 Tampere (Finland)

    2010-12-15

    A framework for modeling and analyzing the energy efficiency of road freight transport is presented in this paper. This framework is tested by using the data from the Finnish Goods Transport by Road statistics. The data was enhanced by calculating the fuel consumption for each trip in the data. To calculate this, weight-fuel consumption functions were estimated for each Euro-class vehicles and road type. This is a new method for analyzing the energy efficiency of road freight transport and it could be applied also in other countries gathering freight transport data with continuous company surveys. The analysis show that the energy efficiency of road freight transport in Finland improved during 1995-2002, but has declined since. The major drivers in the development have been the changes in the level of empty running and vehicle fuel efficiency. Extrapolating current statistical trends of factors that influence the energy efficiency show that the target set by the Finnish government for improving energy efficiency by 9% until 2016 will not be achieved. However, the target is possible to be achieved by a combination of small changes to some determinants. (author)

  11. Back injury prevention: a lift team success story.

    Hefti, Kelly S; Farnham, Richard J; Docken, Lisa; Bentaas, Ruth; Bossman, Sharon; Schaefer, Jill

    2003-06-01

    Work related back injuries among hospital personnel account for high volume, high cost workers' compensation claims. These injuries can be life altering experiences, affecting both the personal and professional lives of injured workers. Lifting must be viewed as a skill involving specialized training and mandated use of mechanical equipment, rather than as a random task performed by numerous health care providers. The use of a lift team specially trained in body mechanics, lifting techniques, and the use of mandated mechanical equipment can significantly affect injury data, financial outcomes, and employee satisfaction. The benefits of a lift team extend beyond the effect on injury and financial outcomes--they can be used for recruitment and retention strategies, and team members serve as mentors to others by demonstrating safe lifting techniques. Ultimately, a lift team helps protect a valuable resource--the health care worker.

  12. Linnainstallatsioonide festival "Lift 11" = Urban installations festival Lift 11 / Margit Aule, Margit Argus ; intervjueerinud Margit Mutso

    Aule, Margit, 1981-

    2012-01-01

    Linnainstallatsioonide festivalist "Lift 11", installatsioonidest. Festivali kuraatorid Margit Argus ja Margit Aule ning kaaskuraatorid Maarin Ektermann ja Ingrid Ruudi pälvisid EK arhitektuuri sihtkapitali 2011. a. arhitektuurialase tegevuse preemia avaliku linnaruumi mitmekesisust märkama, kasutama ning mõtestama ärgitanud ürituse korraldamise eest

  13. Containment structure tendon investigation

    Fulton, J.F.; Murray, K.H.

    1983-01-01

    The paper describes an investigation into the possible causes of lower-than-predicted tendon forces which were measured during past tendon surveillances for a concrete containment. The containment is post tensioned by vertical tendons which are anchored into a rock foundation. The tendons were originally stressed in 1969, and lift-off tests were performed on six occasions subsequent to this date over a period of 11 years. The tendon forces measured in these tests were generally lower than predicted, and by 1979 the prestress level in the containment was only marginally above the design requirement. The tendons were retensioned in 1980, and by this time an investigation into the possible causes was underway. Potential causes investigated include the rock anchors and surrounding rock, elastomeric pad creep, wire stresses, thermal effects, stressing equipment and lift-off procedures, and wire stress relaxation. The investigation activities included stress relaxation testing of wires pulled from actual tendons. The stress relaxation test program included wire specimens at several different temperature and initial stress levels and the effect of a varying temperature history on the stress relaxation property of the wires. For purpose of future force predictions of the retensioned tendons, the test program included tests to determine the effect on stress relaxation due to restressing the wires after they had relaxed for 1000 hours and 10,000 hours. (orig./GL)

  14. THEORETICAL AND EXPERIMENTAL RESEARCH OF STRENGTH PROPERTIES OF SPINE BEAM OF FREIGHT CARS

    L. O. Neduzha

    2018-02-01

    Full Text Available Purpose. The purpose of this paper is to analyze the results of theoretical and experimental studies of the strength properties of rolling stock; search for design tools, modeling, selection, justification of the service life extension of freight cars and their elements. Methodology. The article is based on the finite element method (FEM. It makes possible to completely automate the calculation of mechanical systems, although, as a rule, it requires a much larger number of computational operations than the classical methods of mechanics. The modern level of development of computer technology opens wide opportunities for the introduction of FEM into engineering practice. FEM is implemented in many well-known and widely distributed software products that provide strength analysis of models of machines, mechanisms, structures, including the rolling stock of railways. Findings. The article presents an analysis of the theoretical and experimental studies of the strength properties of rolling stock elements on the example of the spine beam of freight cars; calculations were performed using a modern application program package. The presented example of use of the offered approach has shown its operation capacity and efficiency, as well as correctness of the research direction. The offered approach can be used when solving similar optimization tasks in research and developmental practice of transport mechanical engineering. Originality. The authors proposed me-thod of determining the reliability indicators and solving scientific and applied problem of calculating the elements of freight cars, taking into account the operation features and the loading mode impact. This allows determining their durability at the design stage. There were developed and investigated the models of the spine beam of a freight car, on the basis of which the dependences characterizing the stress-strain state of its elements were obtained. Scientifically substantiated results of

  15. FUEL/CARBON PRICE VS. ABATEMENT TECHNOLOGY IN FREIGHT TRANSPORT

    Eugen Ferdinand Spangenberg

    2017-12-01

    Full Text Available The current situation is the exponential increase in greenhouse gases (GHG, which is mainly caused by industrial and transport activities. The recent Paris agreement in 2015 (Framework Convention on Climate Change COP21, UNFCCC made it clear to everyone that CO2 emissions are to be limited in all areas of life. Alternative fuels with a lower environmental impact than carbon (CO2 emissions are hard to find if the overall footprint is to be taken into account. Nevertheless, there are some fuels that have less impact on climate change. One the other hand, the production of biofuels is a controversial matter, although it is a viable alternative to emissions reduction. CNG or LNG-powered vehicles are also better in terms of environmental pollution, but are hardly better with regard to CO2 impact when a Life Cycle Assessment (LCA is carried out. LNG (liquid natural gas, for example, is the future fuel in the maritime sector because of the stricter environmental regulations (SOx,NOx in the shipping industry. The battery-powered vehicle is another example of an environmentally friendly solution. The afore-mentioned measures can be considered as “abatement“ necessary in order to limit CO2 impact. The study shows that there are significant differences in the environmental impact between transport systems and the corresponding drive-system or associated energy base. The polluter should pay, which is a common basic principle in economic research. The Emission Trading Scheme (ETS has been introduced in order to ensure a reduction in CO2 output – emissions come with a price tag. An overall view is necessary, both en-vironmental and economic impact must be reconciled (cf. Spangenberg - TQI. The future viability of the transport system as we know it may change significantly over time if new environmental requirements or e.g. CO2 taxes or ETS are introduced in the freight sector. The abatement of CO2 should be effected primarily through technological

  16. Liebherr lifts off with east coast projects

    Anon

    2004-11-01

    Liebherr is one of the world's leading manufacturers of construction machinery, and is the supplier of technically-innovative user-oriented products and services not only to the oil industry but also to other industries using heavy lifting equipment. The Newfoundland and Labrador offshore oil and gas sector has been a special springboard of success for the company; they have seven offshore cranes working on three installations, and as the White Rose floating production vessel sails to the Grand Banks in 2005, the number will increase to nine. The other cranes are on the Hibernia platform, the Terra Nova FPSO, and the Henry Goodrich drilling rig. Two of the cranes on the Terra Nova FPSO have a lift capacity of 40 tons, while a third crane mounted at the rear of the vessel has a 20 ton capacity. They are capable of performing loading operations in seas as high as three metres. These cranes are powerful, compact and maneuverable, and feature ultra-modern mobile crane technology that satisfies combined road and off-road operating requirements on construction sites of all kinds. 2 photos.

  17. Deep-water subsea lifting operations

    Nestegaard, Arne; Boee, Tormod

    2010-07-01

    Significant costs are related to marine operations in the installation phase of deep water subsea field developments. In order to establish safe operational criteria and procedures for the installation, detailed planning is necessary, including numerical modelling and analysis of the environmental conditions and hydrodynamic loads on the installed object as well as the installation equipment. This paper presents recommendations for modelling and analysis of deep water subsea lifting operations developed for the new DNV RP-H103 [1]. During installation of subsea structures, the highest dynamic forces are most often encountered in the splash zone. Recommendations for estimation of maximum forces will be presented. For small structures and tools, installation through the moon pool of a small installation vessel is often preferred. Calculation methods for loading on structures installed through a moon pool will be presented. During intervention or installation in deep water a significant amplification of amplitude and forces can be experienced when the frequency range of vertical crane tip motion coincides with the natural vertical oscillation of the lift wire and load. Vertical resonance may reduce the operability of the operation. Simplified calculation methods for such operations are presented. (Author)

  18. AMS gets lift on space shuttle Discovery

    2009-01-01

    AMS-02, the CERN-recognized experiment that will seek dark matter, missing matter and antimatter in Space aboard the International Space Station (ISS), has recently got the green light to be part of the STS-134 NASA mission in 2010. Installation of AMS detectors in the Prévessin experiment hall.In a recent press release, NASA announced that the last or last-but-one mission of the Space Shuttle programme would be the one that will deliver AMS, the Alpha Magnetic Spectrometer, to the International Space Station. The Space Shuttle Discovery is due to lift off in July 2010 from Kennedy Space Center and its mission will include the installation of AMS to the exterior of the space station, using both the shuttle and station arms. "It wasn’t easy to get a lift on the Space Shuttle from the Bush administration," says professor Samuel Ting, spokesperson of the experiment, "since during his administration all the funds for space research w...

  19. Effects of a Belt on Intra-Abdominal Pressure during Weight Lifting.

    1988-03-01

    potentially injurious b compressive forces on spinal discs during lifting. To investigate the effects of a standard lifting belt on lAP and lifting mechanics... injurious compressive forces on spinal discs during lifting. To investigate the effects of a standard lifting belt on IAP and lifting ! mechanics... weightlifting (7,9). Both olympic and power lifters have used lifting belts for many years, yet virtually no research has been reported which examines

  20. ALARA review for the deactivation of 105-N Lift Station

    Nellesen, A.L.

    1997-01-01

    This ALARA review provides a description of the engineering and administrative controls used to manage personnel exposure and to control contamination levels and airborne radioactivity concentrations, while removing water, sludge, stabilizing surfaces, and all other associated work involved in the deactivation of the 105-N Lift Station. The lift station was used as a sump and received contaminated water from the 105-N Fuel Storage Basin weirs and contaminated drains in the 105-N Building. During operation water from the lift station was pumped to the 1310-N and 1325-N cribs. Deactivation of the lift station is a critical step in completing the deactivation of N-Area

  1. Sikkerhedsbestemmelser for beskæringsarbejde fra lift

    Jakobsen, Ole Sejr; Theilby, Frans

    2010-01-01

    Brug af lift til beskæring og fældning af træer er blevet udbredt i den grønne sektor. Som bruger er det vigtigt at kende den lift, man har valgt, og at arbejdet med motorsav foregår efter Arbejdstilsynets regler og anbefalinger.......Brug af lift til beskæring og fældning af træer er blevet udbredt i den grønne sektor. Som bruger er det vigtigt at kende den lift, man har valgt, og at arbejdet med motorsav foregår efter Arbejdstilsynets regler og anbefalinger....

  2. Trends of energy efficiency in Finnish road freight transport 1995-2009 and forecast to 2016

    Liimatainen, Heikki; Poellaenen, Markus

    2010-01-01

    A framework for modeling and analyzing the energy efficiency of road freight transport is presented in this paper. This framework is tested by using the data from the Finnish Goods Transport by Road statistics. The data was enhanced by calculating the fuel consumption for each trip in the data. To calculate this, weight-fuel consumption functions were estimated for each Euro-class vehicles and road type. This is a new method for analyzing the energy efficiency of road freight transport and it could be applied also in other countries gathering freight transport data with continuous company surveys. The analysis show that the energy efficiency of road freight transport in Finland improved during 1995-2002, but has declined since. The major drivers in the development have been the changes in the level of empty running and vehicle fuel efficiency. Extrapolating current statistical trends of factors that influence the energy efficiency show that the target set by the Finnish government for improving energy efficiency by 9% until 2016 will not be achieved. However, the target is possible to be achieved by a combination of small changes to some determinants. - Research highlights: →A new method for analyzing energy efficiency by adding fuel data to national freight statistics. →Energy efficiency improved in Finland from 1995 to 2002 but has declined since. →Energy efficiency in Finland is still on a good level internationally. →Target of the Finnish energy efficiency agreement was quantified for the first time in this study. →The target will not be achieved if the past trends continue.

  3. Using verbal instructions to influence lifting mechanics - Does the directive "lift with your legs, not your back" attenuate spinal flexion?

    Beach, Tyson A C; Stankovic, Tatjana; Carnegie, Danielle R; Micay, Rachel; Frost, David M

    2018-02-01

    "Use your legs" is commonly perceived as sound advice to prevent lifting-related low-back pain and injuries, but there is limited evidence that this directive attenuates the concomitant biomechanical risk factors. Body segment kinematic data were collected from 12 men and 12 women who performed a laboratory lifting/lowering task after being provided with different verbal instructions. The main finding was that instructing participants to lift "without rounding your lower back" had a greater effect on the amount of spine flexion they exhibited when lifting/lowering than instructing them to lift "with your legs instead of your back" and "bend your knees and hips". It was concluded that if using verbal instructions to discourage spine flexion when lifting, the instructions should be spine- rather than leg-focused. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. A Retro-Analysis of I-40 Bridge Collapse on Freight Movement in the U.S. Highway Network using GIS and Assignment Models

    Saniye Gizem Aydin, Ph.D.

    2012-12-01

    Full Text Available Bridges are critical but vulnerable elements of a highway transportation system. A bridge collapse not only affects the freight movement on the bridge but also the flow in the entire network, posing negative impacts on local, regional, and national economy. This study examines the spatial and economic impact of the 2002 I-40 Bridge collapse in Oklahoma on freight flow movement in the U.S. highway network. Freight Analysis Framework (FAF databases, TransCADTM software, and two assignment models (All-or-Nothing and User Equilibrium are used to analyze the freight flow changes before and after the bridge collapse along with two different freight assignment approaches. The first approach assigns the origin-destination freight flow to the network with the collapsed bridge removed. The second involves two successive assignments - first by excluding the pre-hazard freight flow on the bridge and assigning the rest of the flow to the post-disaster network, and second, by assigning the freight flow on the bridge in pre-disaster conditions to the post-disaster-network. The research showed that the bridge collapse did not only impact the freight flows on nearby highway network links, but also affected flows on links further away from the bridge. This finding casts doubts on the conventional models relying on gravity-based spatial distance decay effects, which often overestimate the nearby but underestimate the further-out freight flow changes in the network.

  5. Pig lift applications in offshore dry completion wells; Aplicacao do pig lift em pocos offshore de completacao seca

    Lima, Paulo C.R.; Faria, Rogerio Costa; Almeida, Alcino Resende [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

    2000-07-01

    Production increases of 10% to 130% have been obtained with pig lift installations on offshore oil wells in the Cacao Field, southeast Brazil. At the present time 3 wells out of 5 are being produced with pig lift. These deep, highly deviated wells with little space on the platform to the required surface equipment presented a challenge to pig lift technology. However, these difficulties were overcame and the benefits obtained helped to maintain the economical attractiveness of the platform. (author)

  6. Regulation and practice of workers' protection from chemical exposures during container handling

    Nørgaard Fløe Pedersen, Randi; Jepsen, Jørgen Riis; Ádám, Balázs

    2014-01-01

    instructions relate to container handling, the provided information is not sufficiently detailed to conduct safe practice in many aspects. In accordance with the scientific literature, the interviewees estimate that there is a high frequency (5 to 50%) of containers with hazardous chemical exposure......Background: Fumigation of freight containers to prevent spread of pests and off-gassing of freight are sources of volatile chemicals that may constitute significant health risks when released. The aim of the study was to investigate the regulation and practice of container handling in Denmark...... with focus on preventive measures to reduce risk of chemical exposure. Methods: A comprehensive systematic search of scientific literature, legislation and recommendations related to safe work with transport containers from international and Danish regulatory bodies was performed. The practice of handling...

  7. iLift: A health behavior change support system for lifting and transfer techniques to prevent lower-back injuries in healthcare.

    Kuipers, Derek A; Wartena, Bard O; Dijkstra, Boudewijn H; Terlouw, Gijs; van T Veer, Job T B; van Dijk, Hylke W; Prins, Jelle T; Pierie, Jean Pierre E N

    2016-12-01

    Lower back problems are a common cause of sick leave of employees in Dutch care homes and hospitals. In the Netherlands over 40% of reported sick leave is due to back problems, mainly caused by carrying out heavy work. The goal of the iLift project was to develop a game for nursing personnel to train them in lifting and transfer techniques. The main focus was not on testing for the effectiveness of the game itself, but rather on the design of the game as an autogenous trigger and its place in a behavioral change support system. In this article, the design and development of such a health behavior change support system is addressed, describing cycles of design and evaluation. (a) To define the problem space, use context and user context, focus group interviews were conducted with Occupational Therapists (n=4), Nurses (n=10) and Caregivers (n=12) and a thematic analysis was performed. We interviewed experts (n=5) on the subject of lifting and transferring techniques. (b) A design science research approach resulted in a playable prototype. An expert panel conducted analysis of video-recorded playing activities. (c) Field experiment: We performed a dynamic analysis in order to investigate the feasibility of the prototype through biometric data from player sessions (n=620) by healthcare professionals (n=37). (a) Occupational Therapists, Nurses and Caregivers did not recognise a lack of knowledge with training in lifting and transferring techniques. All groups considered their workload, time pressure and a culturally determined habit to place the patient's well being above their own as the main reason not to apply appropriate lifting and transferring techniques. This led to a shift in focus from a serious game teaching lifting and transferring techniques to a health behavior change support system containing a game with the intention to influence behavior. (b) Building and testing (subcomponents of) the prototype resulted in design choices regarding players perspective

  8. AFC-Enabled Simplified High-Lift System Integration Study

    Hartwich, Peter M.; Dickey, Eric D.; Sclafani, Anthony J.; Camacho, Peter; Gonzales, Antonio B.; Lawson, Edward L.; Mairs, Ron Y.; Shmilovich, Arvin

    2014-01-01

    The primary objective of this trade study report is to explore the potential of using Active Flow Control (AFC) for achieving lighter and mechanically simpler high-lift systems for transonic commercial transport aircraft. This assessment was conducted in four steps. First, based on the Common Research Model (CRM) outer mold line (OML) definition, two high-lift concepts were developed. One concept, representative of current production-type commercial transonic transports, features leading edge slats and slotted trailing edge flaps with Fowler motion. The other CRM-based design relies on drooped leading edges and simply hinged trailing edge flaps for high-lift generation. The relative high-lift performance of these two high-lift CRM variants is established using Computational Fluid Dynamics (CFD) solutions to the Reynolds-Averaged Navier-Stokes (RANS) equations for steady flow. These CFD assessments identify the high-lift performance that needs to be recovered through AFC to have the CRM variant with the lighter and mechanically simpler high-lift system match the performance of the conventional high-lift system. Conceptual design integration studies for the AFC-enhanced high-lift systems were conducted with a NASA Environmentally Responsible Aircraft (ERA) reference configuration, the so-called ERA-0003 concept. These design trades identify AFC performance targets that need to be met to produce economically feasible ERA-0003-like concepts with lighter and mechanically simpler high-lift designs that match the performance of conventional high-lift systems. Finally, technical challenges are identified associated with the application of AFC-enabled highlift systems to modern transonic commercial transports for future technology maturation efforts.

  9. Sensorimotor memory biases weight perception during object lifting

    Vonne evan Polanen

    2015-12-01

    Full Text Available When lifting an object, the brain uses visual cues and an internal object representation to predict its weight and scale fingertip forces accordingly. Once available, tactile information is rapidly integrated to update the weight prediction and refine the internal object representation. If visual cues cannot be used to predict weight, force planning relies on implicit knowledge acquired from recent lifting experience, termed sensorimotor memory. Here, we investigated whether perception of weight is similarly biased according to previous lifting experience and how this is related to force scaling. Participants grasped and lifted series of light or heavy objects in a semi-randomized order and estimated their weights. As expected, we found that forces were scaled based on previous lifts (sensorimotor memory and these effects increased depending on the length of recent lifting experience. Importantly, perceptual weight estimates were also influenced by the preceding lift, resulting in lower estimations after a heavy lift compared to a light one. In addition, the weight estimations were negatively correlated with the magnitude of planned force parameters. This perceptual bias was only found if the current lift was light, but not heavy since the magnitude of sensorimotor memory effects had, according to Weber’s law, relatively less impact on heavy compared to light objects. A control experiment tested the importance of active lifting in mediating these perceptual changes and showed that when weights are passively applied on the hand, no effect of previous sensory experience is found on perception. These results highlight how fast learning of novel object lifting dynamics can shape weight perception and demonstrate a tight link between action planning and perception control. If predictive force scaling and actual object weight do not match, the online motor corrections, rapidly implemented to downscale forces, will also downscale weight estimation in

  10. Emissions of CO{sub 2} from road freight transport in London: Trends and policies for long run reductions

    Zanni, Alberto M., E-mail: a.m.zanni@lboro.ac.u [Transport Studies Group, Department of Civil and Building Engineering, Loughborough University, LE11 3TU Loughborough (United Kingdom); Bristow, Abigail L., E-mail: a.l.bristow@lboro.ac.u [Transport Studies Group, Department of Civil and Building Engineering, Loughborough University, LE11 3TU Loughborough (United Kingdom)

    2010-04-15

    Freight transport has been receiving increasing attention in both literature and practice following the growing recognition of its importance in urban transport planning. This paper analyses historical and projected road freight CO{sub 2} emissions in the city of London and explores the potential mitigation effect of a set of freight transport policies and logistics solutions. Findings indicate a range of policies with potential to reduce emissions in the period up to 2050. However, this reduction would appear to only be capable of partly counterbalancing the projected increase in freight traffic. More profound behavioural measures therefore appear to be necessary for London's CO{sub 2} emissions reduction targets to be met.

  11. Emissions of CO{sub 2} from road freight transport in London. Trends and policies for long run reductions

    Zanni, Alberto M.; Bristow, Abigail L. [Transport Studies Group, Department of Civil and Building Engineering, Loughborough University, LE11 3TU Loughborough (United Kingdom)

    2010-04-15

    Freight transport has been receiving increasing attention in both literature and practice following the growing recognition of its importance in urban transport planning. This paper analyses historical and projected road freight CO{sub 2} emissions in the city of London and explores the potential mitigation effect of a set of freight transport policies and logistics solutions. Findings indicate a range of policies with potential to reduce emissions in the period up to 2050. However, this reduction would appear to only be capable of partly counterbalancing the projected increase in freight traffic. More profound behavioural measures therefore appear to be necessary for London's CO{sub 2} emissions reduction targets to be met. (author)

  12. Freight planning and regional cooperation in the Piedmont Atlantic megaregion : a regional models of cooperation peer exchange summary report

    2017-09-08

    This report highlights key themes identified at the Freight Planning and Regional Cooperation in the Piedmont Atlantic Megaregion Peer Exchange held on January 31, 2017 and February 1, 2017 in Atlanta, Georgia. The Regional Models of Cooperatio...

  13. Coupling System Design Optimization : A Survey and Assessment of Automatic Coupling Concepts for Rail Freight Cars : Volume 1. Executive Summary.

    1978-05-01

    The purpose of this study is to provide an independent identification, classification, and analysis of significant freight car coupling systems concepts offering potential for improved safety and operating costs over the present system. The basic met...

  14. Developing corridor-level truck travel time estimates and other freight performance measures from archived ITS data.

    2009-08-01

    The objectives of this research were to retrospectively study the feasibility for using truck transponder data to produce freight corridor performance measures (travel times) and real-time traveler information. To support this analysis, weigh-in-moti...

  15. Fatigue-related changes in the coordination of lifting and their effect of low back load

    Van Dieën, Jaap H.; Toussaint, Huub M.; Maurice, Cora; Mientjes, Martine

    1996-01-01

    In this study, changes in movement coordination caused by fatigue that developed during repetitive lifting were examined. Five men performed 6 times a 5-min bout of lifting an 8-kg barbell at 15 lifts/min, using two lifting techniques; one minimized trunk rotation (squat lift), and the other

  16. Fitness Tracker for Weight Lifting Style Workouts

    Wihl, B. M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-02-01

    This document proposes an early, high level design for a fitness tracking system which can automatically log weight lifting style workouts. The system will provide an easy to use interface both physically through the use of several wireless wristband style motion trackers worn on the limbs, and graphically through a smartphone application. Exercise classification will be accomplished by calibration of the user’s specific motions. The system will accurately track a user’s workout, miscounting no more than one repetition in every 20, have sufficient battery life to last several hours, work with existing smartphones and have a cost similar to those of current fitness tracking devices. This document presents the mission background, current state-of-theart, stakeholders and their expectations, the proposed system’s context and concepts, implementation concepts, system requirements, first sublevel function decomposition, possible risks for the system, and a reflection on the design process.

  17. Contestability of Container Liner Shipping Market in Alliance Era

    Enna Hirata

    2017-03-01

    Full Text Available A cross section panel model is applied to estimate the effect that the Herfindahl-Hirschman Index (HHI has on container freight rates for a sample of six major container liner shipping routes during 2009 to 2011. The estimated coefficient of HHI is non-positive and statistically insignificant, indicating that higher concentration level does not lead to high price and the container liner shipping market is contestable for the period under consideration. The suggestion that efficiency can be achieved without actual competition in a contestable market is highly significant for policy makers.

  18. Comparison of Methods of Teaching Children Proper Lifting ...

    Objective: This study was designed to determine the effects of three teaching methods on children\\'s ability to demonstrate and recall their mastery of proper lifting techniques. Method: Ninety-three primary five and six public school children who had no knowledge of proper lifting technique were assigned into three equal ...

  19. Effect of ship motion on spinal loading during manual lifting

    Faber, G.S.; Kingma, I.; Delleman, N.; Dieën, J. van

    2008-01-01

    This study investigated the effects of ship motion on peak spinal loading during lifting. All measurements were done on a ship at sea. In 1-min trials, which were repeated over a wide range of sailing conditions, subjects lifted an 18 kg box five times. Ship motion, whole body kinematics, ground

  20. Short-term forecasting of intermodal freight using ANNs and SVR: Case of the Port of Algeciras Bay

    Moscoso Lopez, J.A.

    2016-07-01

    Forecasting of future intermodal traffic demand is very important for decision making in ports operations management. The use of accurate prediction tools is an issue that awakens a lot of interest among transport researchers. Intermodal freight forecasting plays an important role in ports management and in the planning of the principal port activities. Hence, the study is carried out under the motivation of knowing that modeling the freight transport flows could facilitate the management of the infrastructure and optimize the resources of the ports facilities. The use of advanced models for freight forecasting is essential to improve the port level-service and competitiveness. In this paper, two forecasting-models are presented and compared to predict the freight volume. The models developed and tested are based on Artificial Neural Networks and Support Vector Machines. Both techniques are based in a historical data and these methods forecast the daily weight of the freight with one week in advance. The performance of the models is evaluated on real data from Ro-Ro freight transport in the Port of Algeciras Bay. This work proposes and compares different approaches to determine the best prediction. In order to select the best model a multicomparison procedure is developed using several statistical test. The results of the assessed models show a promising tool to predict Ro-Ro transport flows with accuracy. (Author)

  1. Maximum Acceptable Weight of Lift reflects peak lumbosacral extension moments in a Functional Capacity Evaluation test using free style, stoop, and squat lifting

    Kuijer, P.P.F.M.; van Oostrom, S.H.; Duijzer, K.; van Dieen, J.H.

    2012-01-01

    It is unclear whether the maximum acceptable weight of lift (MAWL), a common psychophysical method, reflects joint kinetics when different lifting techniques are employed. In a within-participants study (n = 12), participants performed three lifting techniques - free style, stoop and squat lifting

  2. Maximum acceptable weight of lift reflects peak lumbosacral extension moments in a functional capacity evaluation test using free style, stoop and squat lifting

    Kuijer, P. P. F. M.; van Oostrom, S. H.; Duijzer, K.; van Dieën, J. H.

    2012-01-01

    It is unclear whether the maximum acceptable weight of lift (MAWL), a common psychophysical method, reflects joint kinetics when different lifting techniques are employed. In a within-participants study (n = 12), participants performed three lifting techniques - free style, stoop and squat lifting

  3. Container terminal spatial planning - A 2041 paradigm for the Western Cape Province in South Africa

    Jan Havenga

    2012-11-01

    Full Text Available This paper investigates the suitable location for an intermodal inland container terminal (IICT in the city of Cape Town. A container market segmentation approach is used to project growth for container volumes over a 30-year period for all origin and destination pairings on a geographical district level in an identified catchment area. The segmentation guides the decision on what type of facility is necessary to fulfil capacity requirements in the catchment area and will be used to determine the maximum space requirements for a future IICT. Alternative sites are ranked from most suitable to least suitable using multi-criteria analysis, and preferred locations are identified. Currently, South Africa’s freight movement is dominated by the road sector. Heavy road congestion is thus prevalent at the Cape Town Container Terminal (CTCT. The paper proposes three possible alternative sites for an IICT that will focus on a hub-and-spoke system of transporting freight.

  4. Optimization of lift gas allocation in a gas lifted oil field as non-linear optimization problem

    Roshan Sharma

    2012-01-01

    Full Text Available Proper allocation and distribution of lift gas is necessary for maximizing total oil production from a field with gas lifted oil wells. When the supply of the lift gas is limited, the total available gas should be optimally distributed among the oil wells of the field such that the total production of oil from the field is maximized. This paper describes a non-linear optimization problem with constraints associated with the optimal distribution of the lift gas. A non-linear objective function is developed using a simple dynamic model of the oil field where the decision variables represent the lift gas flow rate set points of each oil well of the field. The lift gas optimization problem is solved using the emph'fmincon' solver found in MATLAB. As an alternative and for verification, hill climbing method is utilized for solving the optimization problem. Using both of these methods, it has been shown that after optimization, the total oil production is increased by about 4. For multiple oil wells sharing lift gas from a common source, a cascade control strategy along with a nonlinear steady state optimizer behaves as a self-optimizing control structure when the total supply of lift gas is assumed to be the only input disturbance present in the process. Simulation results show that repeated optimization performed after the first time optimization under the presence of the input disturbance has no effect in the total oil production.

  5. Can a new behaviorally oriented training process to improve lifting technique prevent occupationally related back injuries due to lifting?

    Lavender, Steven A; Lorenz, Eric P; Andersson, Gunnar B J

    2007-02-15

    A prospective randomized control trial. To determine the degree to which a new behavior-based lift training program (LiftTrainer; Ascension Technology, Burlington, VT) could reduce the incidence of low back disorder in distribution center jobs that require repetitive lifting. Most studies show programs aimed at training lifting techniques to be ineffective in preventing low back disorders, which may be due to their conceptual rather than behavioral learning approach. A total of 2144 employees in 19 distribution centers were randomized into either the LiftTrainer program or a video control group. In the LiftTrainer program, participants were individually trained in up to 5, 30-minute sessions while instrumented with motion capture sensors to quantify the L5/S1 moments. Twelve months following the initial training, injury data were obtained from company records. Survival analyses (Kaplan-Meier) indicated that there was no difference in injury rates between the 2 training groups. Likewise, there was no difference in the turnover rates. However, those with a low (<30 Nm) average twisting moment at the end of the first session experienced a significantly (P < 0.005) lower rate of low back disorder than controls. While overall the LiftTrainer program was not effective, those with twisting moments below 30 Nm reported fewer injuries, suggesting a shift in focus for "safe" lifting programs.

  6. A comparative analysis of lumbar spine mechanics during barbell- and crate-lifting: implications for occupational lifting task assessments.

    Zehr, Jackie D; Carnegie, Danielle R; Welsh, Timothy N; Beach, Tyson A C

    2018-03-19

    To compare the effects of object handled and handgrip used on lumbar spine motion and loading during occupational lifting task simulations. Eight male and eight female volunteers performed barbell and crate lifts with a pronated (barbell) and a neutral (crate) handgrip. The mass of barbells/crates lifted was identical across the objects and fixed at 11.6 and 9.3 kg for men and women, respectively. The initial heights of barbells/crates were individualized to mid-shank level. Body segment kinematics and foot-ground reaction kinetics were collected, and then input into an electromyography-assisted dynamic biomechanical model to quantify lumbar spine motion and loading. Lumbar compression and net lumbosacral moment magnitudes were 416 N and 17 Nm lower when lifting a barbell than when lifting a crate (p  0.392) or flexion/extension velocities (p > 0.085). Crate- and barbell-lifting tasks can be used interchangeably if assessing lifting mechanics based on peak spine motion variables. If assessments are based on the spine loading responses to task demands, however, then crate- and barbell-lifting tasks cannot be used interchangeably.

  7. Maximum Acceptable Weight of Lift reflects peak lumbosacral extension moments in a Functional Capacity Evaluation test using free style, stoop, and squat lifting

    Kuijer, P.P.F.M.; van Oostrom, S.H.; Duijzer, K.; van Dieen, J.H.

    2012-01-01

    It is unclear whether the maximum acceptable weight of lift (MAWL), a common psychophysical method, reflects joint kinetics when different lifting techniques are employed. In a within-participants study (n = 12), participants performed three lifting techniques - free style, stoop and squat lifting from knee to waist level - using the same dynamic functional capacity evaluation lifting test to assess MAWL and to calculate low back and knee kinetics. We assessed which knee and back kinetic para...

  8. The Impact of Delays of Freight Trains in JIT System on Example One Track Line

    Dlugoš Matúš

    2017-01-01

    Full Text Available The paper describes the problem between freight trains operated by Metrans Danube, a.s. and passenger trains operated by Regiojet, a.s on the line Bratislava – Dunajská Streda - Komárno. It is very important to emphasize this problem because, nowadays, mostly freight trains across the Europe drive in just in time system, it means, that shipments are delivered at exact time and place on time. At this line there are many problems not only this track line is single track, so it is necessary to cross the trains very often in traffic points which maximum 2 traffic tracks but also organizing of transport is more complicated which is provided by Railway infrastructure manager – this case is very important example when railway traffic technology slows down all processes in the logistic chain.

  9. Identification of key target markets for intermodal freight transport solutions in South Africa

    Joubert van Eeden

    2010-11-01

    Full Text Available The Accelerated and Shared Growth Initiative for South Africa (AsgiSA identified South Africa's freight logistics challenges as among the key binding constraints on the country's growth aspirations. The research presented here points to the structural imbalance between road and rail freight transport as one of the key contributors to this state of affairs. Most long-distance corridor transport has been captured by road. However, long-distance transport is a market segment that is very suitable for intermodal transportation : rail is utilised for the high-density, long-distance component and road for the feeder and distribution services at the corridor end points. A market segmentation approach is developed to identify the corridors and industries that are natural candidates for such solutions, thereby paving the way for role-players and stakeholders to initiate a dialogue on the development of appropriate solutions.

  10. Event-based scenario manager for multibody dynamics simulation of heavy load lifting operations in shipyards

    Sol Ha

    2016-01-01

    Full Text Available This paper suggests an event-based scenario manager capable of creating and editing a scenario for shipbuilding process simulation based on multibody dynamics. To configure various situation in shipyards and easily connect with multibody dynamics, the proposed method has two main concepts: an Actor and an Action List. The Actor represents the anatomic unit of action in the multibody dynamics and can be connected to a specific component of the dynamics kernel such as the body and joint. The user can make a scenario up by combining the actors. The Action List contains information for arranging and executing the actors. Since the shipbuilding process is a kind of event-based sequence, all simulation models were configured using Discrete EVent System Specification (DEVS formalism. The proposed method was applied to simulations of various operations in shipyards such as lifting and erection of a block and heavy load lifting operation using multiple cranes.

  11. The liquid lift: Looking natural without lumps

    Iñigo de Felipe

    2015-01-01

    Full Text Available Context: Hyaluronic acid (HA is the most common filler used to rejuvenate. Today, a three-dimensional approach prevails over previous techniques in which this material was used in specific areas of the face such as the nasolabial fold, the marionette line, and the eye trough giving a strange appearance that does not look natural. Even with a volumizing purpose, the injection of HA can sometimes produce clinically detectable nodules or lumps where the filler is deposited. Aims: To develop a new technique of injecting HA that can provide more natural results and avoid the lumpiness and nodular appearance that sometimes occurs with the injection of HA. To detect whether mixing HA with diluted anesthetic agent modifies its behavior. Settings and Design: Prospective, case control, single-center study on a private clinic setting. Materials and Methods: Eighty six patients were enrolled in this study. All of them had a previous treatment with nondiluted HA using a needle at least a year before. Patients were injected with 8 mL of reticulated HA (RHA mixed with 6 mL of saline and 2 mL of anesthetic agent. The mixture was administered through a cannula inserted in the face, one at mid-cheek and another at frontal-temporal point of entry. Owing to the lifting effect of this mixture we called this procedure liquid lift (LL. Patients were evaluated 1 month, 6 months, and a year later and asked to compare the LL with previous experiences in terms of natural look, pain, and appearance of nodules. Statistical Analysis Used: Student′s t-test. Results: One month after the treatment, 83 out of 86 patients (96.5% thought LL produced a more natural look than the previous treatment with the needle. Sixty two (72% considered LL less painful than the previous treatment and only eight (9.3% could detect lumps or nodules 1 month after LL was performed compared with 46 (53.5% that described this problem with previous needle injections. The incidence of bruising was

  12. Efficiency Analysis of European Freight Villages-Three Peers for Benchmarking

    Yang, Congcong; Taudes, Alfred; Dong, Guozhi

    2015-01-01

    Measuring the performance of Freight Villages (FVs) has important implications for logistics companies and other related companies as well as governments. In this paper we apply Data Envelopment Analysis (DEA) to measure the performance of European FVs in a purely data-driven way incorporating the nature of FVs as complex operations that use multiple inputs and produce several outputs. We employ several DEA models and perform a complete sensitivity analysis of the appropriateness of the chose...

  13. Influence of Switches and Crossings on Wheel Wear of a Freight Vehicle

    Doulgerakis, Emmanouil

    2013-01-01

    Turnouts (Switches & Crossings) are important components in railway networks, as they provide the necessary flexibility for train operations by allowing trains to change among the tracks. But the turnout’s geometry with discontinuity in rail profiles and lack of transition curve causes additional wear both on track and on vehicle. The main goal of this MSc thesis is to investigate the influence of turnouts on wheel wear of a freight vehicle. This will be obtained by simulations in the com...

  14. EXPERIMENTAL RESEARCH OF DYNAMIC QUALITIES OF FREIGHT CARS WITH BOGIES OF DIFFERENT DESIGNS

    S. V. Myamlin

    2014-04-01

    Full Text Available Purpose. With the advent of new designs of freright cars the task of designing the more modern bogies, assessment of their dynamic properties depending on the type and structure of pecularities, accounting the axle loadings, providing the dynamic and running characteristics, meeting the conditions of impact on the track, stability, and frame forces intensity etc. becomes especially important. In order to launch the new production into manufacture and to assess the dynamic properties using different designs of bogies the running testes were conducted. They allowed one to compare the dynamic performance of the new bogie with the existing models. Methodology. The study was conducted using the method of numerical integration and mathematical modeling of dynamic loading of freight cars using the software package «Dynamics of Rail Vehicles» («DYNRAIL». Findings. The results of studies of dynamic characteristics of open cars with new and worn wheels of bogie models 18-9771, 18-9770 and 18-578 in graphical and tabular form are presented. All figures are within the normative values and do not exceed the maximum admissible ones. Originality. When designing the bogie for loading 23.5 t/axle almost all available technical solutions to improve the characteristics of the freight car bogies (elastic bearers, cassette bearing in axle boxes, axle boxe adapter of original design, bilinear central spring suspension, etc. were used. Practical value. As a result of the engineering works on projecting and manufacturing of the improved designs of freight car bogies a new design was received. It is highly competitive with the dynamic qualities of the best ones. Made choice of rational values of elastic-dissipative parameters of the bogie allows one to create standard series of running gears for freight cars for promising operating conditions.The results are of practical importance. They have found reflection in the number of author’spublications in special and

  15. The rebound effect on road freight transport: Empirical evidence from Portugal

    Matos, Fernando J.F.; Silva, Francisco J.F.

    2011-01-01

    Because a large proportion of total operating costs for transportation companies goes towards energy, a reduction in energy operating costs, brought about by an increase in fleet fuel efficiency, or an increase in operational efficiency, results in a change in the relative cost of road freight transportation. This fact could result in an increase in the demand for such services. If this is true, the result would be an increase in total fuel consumption. Consequently, that part of the energy savings obtained through the increased energy efficiency would be lost. The existence of a 'Rebound Effect' is especially important in the road freight transportation sector and is crucial for the definition of a national energy policy. In this study, data from the road freight transportation sector in Portugal for the years of 1987 through 2006 was analyzed. It was determined that an increase in energy efficiency did not cause a backfire, but did cause a total direct rebound effect of 24.1%. In addition, fleet operators were more inclined to adopt operational efficiencies than technological fuel efficiencies as a means of increasing the total operational efficiency. - Research highlights: → We estimate a direct rebound effect for road freight transportation in Portugal. → The functional form chosen was a log-log model and the estimation method used was the two stage least squares model. → Increasing energy efficiency by 1% results in a reduction of 0.759% in energy consumption (a direct rebound effect of about 24.1%). → Estimates of reduced fuel consumption without considering the direct rebound effect may be overestimated by about 0.87 million liters of diesel per year for each percentage point increase in energy efficiency.

  16. Modelling the rebound effect with network theory: An insight into the European freight transport sector

    Ruzzenenti, Franco; Basosi, Riccardo

    2017-01-01

    This paper presents a two pronged approach to the study of the rebound effect, with the aim of assessing the magnitude of the effect in the European freight transport sector and proposing a new modelling framework based on network theory. The (direct) rebound effect is assessed with: 1) an econometric regression; 2) a model based on network theory and statistical mechanics. According to the econometric model the European road freight transport sector undergone a negative rebound between of −74% between 1998 and 2007 and −146% between 1998 and 2011. The network analysis delivers an estimation of network rebound ranging between −29.37% and −7.25. Overall, these results indicate that energy efficiency in Europe, between 1998 and 2011, succeed in reducing the energy consumptions amid an increasing demand for transports. Results on rebound estimation depend on the decision of using GDP as an exogenous variable, an assumption that leaves questions open about the causality chain between growth and transports. Furthermore, the network analysis highlights a structural change –a migration of production factors offshore, that might partially explain this negative effect. In this view, rebound effect analysis on a local or regional scale is becoming more and more uncertain in a globally interconnected economic context. - Highlights: • An evaluation of direct rebound effect in the freight transports with an econometric model is performed. • A new concept of rebound effect based on network theory is presented and implemented. • A comparative analysis of the two different approaches is developed. • Both models indicate that the there was a negative rebound effect in European freight transports. • Network theory proved to be a promising approach to energy systems and rebound effect modelling.

  17. Method of distributing of freight transportations on paralell to motions on the electrified areas

    N.O. Logvinova

    2012-04-01

    Full Text Available As compared to transportation of loads on tariff distance, it is economic grounded on occasion, it is advantageous to send trains on parallel directions which have more simple type, but longer tariff. With the staring-up of wholesale market of electric power for a railway it is economic advantageous to execute freight transportations in a night-time, that will provide the decline of prime price

  18. Railway investigation report : derailment : Canadian National freight train M30351-03 mile 49.4, Edson Subdivision, Wabamun, Alberta, 03 August 2005

    2007-01-01

    This railway investigation report described an incident in which 43 cars of a Canadian National (CN) freight train derailed near Wabamun, Alberta. The cars contained pole treating oil, toluene, and 700,000 litres of Bunker C heavy oil fuel oil. The accident caused extensive environmental and biological damage to the area, and approximately 20 people were evacuated. This report provided factual information concerning the accident, including details of the railway track and the defect that led to the derailment, as well as details of the CN incident response and remediation process and responses from Alberta Environment. An analysis of the incident examined fatigue limits, defect tracking, and emergency response systems. The report then concluded by examining safety actions taken to ensure improved rail testing, track inspection and maintenance practices. 57 refs., 3 tab., 3 fig

  19. 'Natural Gas lift', a New Tool for Nigeria

    Lucas, C. D.

    2003-01-01

    Gas lift is the most common means of artificial lift in the Niger Delta and has been widely applied worldwide. The advent of remote monitoring and control devises (RMC) has added a new option in artificiallift, 'natural gas lift'. 'Natural gas lift' is an extension RMC in which a gas zone and one or more oil zones are produced through the same tubing string, using the gas enhance the production of the oil zones. The flow of gas is maintained in the optimal range using down hole chokes that are controlled from the surface. The gas flow rate is monitored using downhole pressure and .temperature gauges. The use of 'natural gas lift' has the advantages of gas lift but without the cost associated with gas lift; gas supply wells, compression etc. This is especially critical in areas that are remote from other facilities or in subsea completions where access to the wells is limited. Stacked reservoirs and frequent inclusion of both oil and gas reservoirs in the same field, as found in the Niger Delta, makes Nigeria a prime candidate for this technology. An example of this production from the North Sea will be presented along with a potential application using data from the Niger Delta. Design elements of the monitoring and control systems will be covered and the advantages and drawbacks of this application will be discussed

  20. EMG Processing Based Measures of Fatigue Assessment during Manual Lifting

    E. F. Shair

    2017-01-01

    Full Text Available Manual lifting is one of the common practices used in the industries to transport or move objects to a desired place. Nowadays, even though mechanized equipment is widely available, manual lifting is still considered as an essential way to perform material handling task. Improper lifting strategies may contribute to musculoskeletal disorders (MSDs, where overexertion contributes as the highest factor. To overcome this problem, electromyography (EMG signal is used to monitor the workers’ muscle condition and to find maximum lifting load, lifting height and number of repetitions that the workers are able to handle before experiencing fatigue to avoid overexertion. Past researchers have introduced several EMG processing techniques and different EMG features that represent fatigue indices in time, frequency, and time-frequency domain. The impact of EMG processing based measures in fatigue assessment during manual lifting are reviewed in this paper. It is believed that this paper will greatly benefit researchers who need a bird’s eye view of the biosignal processing which are currently available, thus determining the best possible techniques for lifting applications.