WorldWideScience

Sample records for frank lead parameters

  1. Performance of Dower's inverse transform and Frank lead system for Identification of Myocardial Infarction.

    Science.gov (United States)

    Aranda, A; Bonizzi, P; Karel, J; Peeters, R

    2015-08-01

    This study performs a comparison between Dower's inverse transform and Frank lead system for Myocardial Infarction (MI) identification. We have selected a set of relevant features for MI detection from the vectorcardiogram and used the lasso method after that to build a model for the Dower's inverse transform and one for the Frank leads system. Then we analyzed the performance between both models on MI detection. The proposed methods have been tested using PhysioNet PTB database that contains 550 records from which 368 are MIs. Two main conclusions are coming from this study. The first one is that Dower's inverse transform performs equally well than Frank leads in identification of MI patients. The second one is that lead positions have a large influence on the accuracy of MI patient identification.

  2. Effect of radiation on the critical Frank – Kamenetskii parameter of ...

    African Journals Online (AJOL)

    We investigate the effect radiation on the critical Frank-Kamenetskii parameter of thermal ignition in a combustible gas containing fuel droplets (furnaces, gas turbines and internal combustion engines). Previous works show that radiation delays ignition in a well stirred reactor. In this paper we show that, even in a ...

  3. When Deriving the Spatial QRS-T Angle from the 12-lead ECG, which Transform is More Frank: Regression or Inverse Dower?

    Science.gov (United States)

    Schlegel, Todd T.; Cortez, Daniel

    2010-01-01

    Our primary objective was to ascertain which commonly used 12-to-Frank-lead transformation yields spatial QRS-T angle values closest to those obtained from simultaneously collected true Frank-lead recordings. Simultaneous 12-lead and Frank XYZ-lead recordings were analyzed for 100 post-myocardial infarction patients and 50 controls. Relative agreement, with true Frank-lead results, of 12-to-Frank-lead transformed results for the spatial QRS-T angle using Kors regression versus inverse Dower was assessed via ANOVA, Lin s concordance and Bland-Altman plots. Spatial QRS-T angles from the true Frank leads were not significantly different than those derived from the Kors regression-related transformation but were significantly smaller than those derived from the inverse Dower-related transformation (P less than 0.001). Independent of method, spatial mean QRS-T angles were also always significantly larger than spatial maximum (peaks) QRS-T angles. Spatial QRS-T angles are best approximated by regression-related transforms. Spatial mean and spatial peaks QRS-T angles should also not be used interchangeably.

  4. Correlation between some parameters of lead absorption and lead intoxication

    Science.gov (United States)

    Waldron, H. A.

    1971-01-01

    Waldron, H. A. (1971).Brit. J. industr. Med.,28, 195-199. Correlation between some parameters of lead absorption and lead intoxication. Use has been made of data collected over a number of years from workers exposed to a lead hazard in a motor-car factory. The correlations between various parameters of lead absorption and lead intoxication were computed, including blood and urine lead concentrations, urinary coproporphyrin, ALA and PBG concentrations, and haemoglobin concentration. In all, 15 correlation coefficients were calculated, of which only six showed a statistically significant result (i.e., Plead and urine lead (r = 0·38, Plead and coproporphyrin (r = 0·42, Plead and ALA (r = 0·43, Plead and PBG (r = 0·19, P<0·05). PMID:5572689

  5. Cotton, Prof. Frank Albert

    Indian Academy of Sciences (India)

    ... Lecture Workshops · Refresher Courses · Symposia · Live Streaming. Home; Fellowship. Fellow Profile. Elected: 1985 Honorary. Cotton, Prof. Frank Albert. Date of birth: 9 April 1930. Date of death: 20 February 2007. Last known address: Department of Chemistry, Texas A & M University, College Station, TX 77843, U.S.A..

  6. Lead toxicity on hematological parameters in workers with occupational exposure to lead

    International Nuclear Information System (INIS)

    Dursun, N.; Koese, K.

    1998-01-01

    The effects of lead on hematological parameters were studied in lead exposed male workers occupied for 17.84+-4.22 years in a metal powder producing factory in Kayseri, Turkey and control male workers in same city. Blood lead and plasma zinc levels were measured by Atomic Absorption Spectrophotometry (AAS) and hematological parameters by Culture Counter S. The lead exposure workers had higher lead levels (13.81+- 9.21 mug/dl) as compared to control subjects (2.37+-0.10 mug/dl). No difference was observed in the plasma zinc levels of both groups. As indices of lead exposure, red blood cell (RBC) counts, hemoglobin (Hb), and hematocrit (Hct) values significantly decreased. Mean corpuscular volume (MCV), mean corpuscular hemoglobin (MCH), and mean corpuscular haemoglobin concentration (MCHC) significantly increased except MCV. There was also an increase in MCV, but it was not significant. (author)

  7. Frank-ter harr syndrome

    International Nuclear Information System (INIS)

    Saeed, M.; Shair, Q.A.; Saleem, S.M.

    2011-01-01

    Frank-Ter Haar Syndrome (FTHS) is a rare hereditary inherited disorder with many abnormalities. The main clinical features are brachycephaly, wide fontanels, prominent forehead, hypertelorism, prominent eyes, macrocornea with or without glaucoma, full cheeks, small chin, congenital heart defects, kyphoscoliosis, skeletal dysplasia, developmental delay, coccygeal skin folds and flexion deformity of the fingers. This case report describes Frank-Ter Haar syndrome in a 4 months old girl suffering from club foot, dysmorphism, prominent coccyx with skin fold, atrial septal defect, patent ductus asteriosus and megalocornea. (author)

  8. Frank-Ter Haar Syndrome.

    Science.gov (United States)

    Saeed, Muhammad; Shair, Qamar Ali; Saleem, Shah Masabat

    2011-04-01

    Frank-Ter Haar Syndrome (FTHS) is a rare hereditary inherited disorder with many abnormalities. The main clinical features are brachycephaly, wide fontanels, prominent forehead, hypertelorism, prominent eyes, macrocornea with or without glaucoma, full cheeks, small chin, congenital heart defects, kyphoscoliosis, skeletal dysplasia, developmental delay, coccygeal skin folds and flexion deformity of the fingers. This case report describes Frank-Ter Haar syndrome in a 4 months old girl suffering from club foot, dysmorphism, prominent coccyx with skin fold, atrial septal defect, patent ductus asteriosus and megalocornea.

  9. Frank C. Laubach, Literacy Pioneer.

    Science.gov (United States)

    Kearney, Linda

    A fervent idealist whose dream was to eliminate illiteracy throughout the world, Frank C. Laubach sought to bring Christianity to the masses by giving them the ability to read and spread the teachings of the Bible. In working with people in the nonindustrialized nations, Laubach also saw the need for economic and political self-sufficiency. He…

  10. Leading-Edge Flow Sensing for Aerodynamic Parameter Estimation

    Science.gov (United States)

    Saini, Aditya

    The identification of inflow air data quantities such as airspeed, angle of attack, and local lift coefficient on various sections of a wing or rotor blade provides the capability for load monitoring, aerodynamic diagnostics, and control on devices ranging from air vehicles to wind turbines. Real-time measurement of aerodynamic parameters during flight provides the ability to enhance aircraft operating capabilities while preventing dangerous stall situations. This thesis presents a novel Leading-Edge Flow Sensing (LEFS) algorithm for the determination of the air -data parameters using discrete surface pressures measured at a few ports in the vicinity of the leading edge of a wing or blade section. The approach approximates the leading-edge region of the airfoil as a parabola and uses pressure distribution from the exact potential-ow solution for the parabola to _t the pressures measured from the ports. Pressures sensed at five discrete locations near the leading edge of an airfoil are given as input to the algorithm to solve the model using a simple nonlinear regression. The algorithm directly computes the inflow velocity, the stagnation-point location, section angle of attack and lift coefficient. The performance of the algorithm is assessed using computational and experimental data in the literature for airfoils under different ow conditions. The results show good correlation between the actual and predicted aerodynamic quantities within the pre-stall regime, even for a rotating blade section. Sensing the deviation of the aerodynamic behavior from the linear regime requires additional information on the location of ow separation on the airfoil surface. Bio-inspired artificial hair sensors were explored as a part of the current research for stall detection. The response of such artificial micro-structures can identify critical ow characteristics, which relate directly to the stall behavior. The response of the microfences was recorded via an optical microscope for

  11. Frank Blythe (1924-2010)

    CERN Multimedia

    2010-01-01

    Frank Blythe, one of the very first engineers engaged in the CERN adventure, passed away on October 22. Born and educated in Salford (England), after a time spent at Metropolitan-Vickers in Manchester, in January 1954 he joined the group at the Nuclear Physics Research Laboratory in Liverpool that was working on the first CERN accelerator, the Synchrocyclotron (SC). At that time CERN had not yet officially been constituted, yet had a well defined work programme, the design and construction work being carried out in various European laboratories. In Liverpool the work included the SC vacuum and cooling system, radiation shielding, experimental areas and beams. By the end of 1954, Frank reached the CERN premises in Geneva, and contributed significantly to the successful construction work of the Synchrocyclotron. He later became responsible for the drawing office and the mechanical workshop (Engineering Group) attached to the MSC Division, and also serving the NP/EP Division. He kept this position until ...

  12. Frank Krienen (1917-2008)

    CERN Multimedia

    2008-01-01

    Amsterdam, summer 1952: it was here that the first recruits for CERN ‘s 600 MeV Synchrocyclotron project met Frank Krienen for the first time. A young assistant to Prof. C.J. Bakker at the Physics Institute, he soon became the mastermind behind the most daring aspects of the project: the frequency modulating circuit, based on a vibrating tuning fork, was his creation. He was a respected and inspiring leader throughout the construction period of the accelerator and, at the same time, an older brother and an exacting mentor. Frank later devoted himself to developing particle detectors, in particular spark wire chambers using different types of readout. His next major involvement at CERN was his contribution to the glorious g-2 saga. Frank’s contributions to the last experiment of the anomalous magnetic moment of the muon (g-2) done at CERN (1969-1977) were very important in many aspects. The last (g-2) experiment was based on many...

  13. Frank Capra and Elia Kazan, American outsiders

    Directory of Open Access Journals (Sweden)

    Yves Carlet

    2010-11-01

    Full Text Available Frank Capra and Elia Kazan both came to the United States as children. From immigrant stock, each experienced the effects of being looked down upon as outsiders to Anglo culture. Based on the two men’s autobiographical accounts, together with their films and biographical writings about them, this article examines the routes by which they sought entry into the dominant culture. This process would require the rejection, in each case, of part of his family heritage. It would lead to very different attitudes to ethnicity in their films: Kazan demonstrated interest in the subject, whereas Capra largely suppressed it. The article underlines other “covert dialogues” in the films directed by the two men. It shows that they most diverged over issues of sexuality and the later rediscovery of their ethnic roots.

  14. THERMODYNAMIC PARAMETERS OF LEAD SULFIDE CRYSTALS IN THE CUBIC PHASE

    Directory of Open Access Journals (Sweden)

    T. O. Parashchuk

    2016-07-01

    Full Text Available Geometric and thermodynamic parameters of cubic PbS crystals were obtained using the computer calculations of the thermodynamic parameters within density functional theory method DFT. Cluster models for the calculation based on the analysis of the crystal and electronic structure. Temperature dependence of energy ΔE and enthalpy ΔH, Gibbs free energy ΔG, heat capacity at constant pressure CP and constant volume CV, entropy ΔS were determined on the basis of ab initio calculations of the crystal structure of molecular clusters. Analytical expressions of temperature dependences of thermodynamic parameters which were approximated with quantum-chemical calculation points have been presented. Experimental results compared with theoretically calculated data.

  15. In Memoriam: Dr. Frank John Fenner

    Centers for Disease Control (CDC) Podcasts

    This podcast reflects on one of the greatest pioneers in virology, Dr. Frank John Fenner. Dr. Frederick Murphy, a member of EID's editorial board and the Institute of Medicine, and professor of Pathology at the University of Texas Medical Branch in Galveston, shares professional and personal stories of Dr. Frank Fenner.

  16. In Memoriam: Dr. Frank John Fenner

    Centers for Disease Control (CDC) Podcasts

    2011-04-22

    This podcast reflects on one of the greatest pioneers in virology, Dr. Frank John Fenner. Dr. Frederick Murphy, a member of EID's editorial board and the Institute of Medicine, and professor of Pathology at the University of Texas Medical Branch in Galveston, shares professional and personal stories of Dr. Frank Fenner.  Created: 4/22/2011 by National Center for Emerging Zoonotic and Infectious Diseases (NCEZID).   Date Released: 4/26/2011.

  17. Obituary: Frank Culver Jones, 1932-2007

    Science.gov (United States)

    Ormes, Johnathan F.; Streitmatter, Robert E.

    2007-12-01

    Frank C. Jones, an emeritus theoretical physicist at NASA, died May 2, 2007 at age 74 after a struggle with a rare form of cancer. He died at his home in Silver Spring, Maryland, surrounded by his family. Frank was born July 30, 1932 in Fort Worth, Texas, the oldest of three boys. His parents were Kenneth Hugh and Nancy Culver Jones. Frank's father was a lawyer, and his grandfather was a Methodist minister. Frank graduated from Rice University in 1954 and earned a master's degree in 1955 and a doctorate in 1961, both in physics, from the University of Chicago. He did his graduate work with Prof. John Simpson. Dr. Jones began his professional career as an instructor in physics at Princeton University before joining NASA's Goddard Space Flight Center in 1963 as a National Research Council associate. He subsequently became a member of the Theory Division and the Laboratory for High Energy Astrophysics. His area of expertise was the origin, transport, and electromagnetic interactions of cosmic rays. His particular focus was the stochastic physics related to the diffusion of particles in random fields, plasma turbulence, and the shock acceleration of charged particles in collisionless plasmas. From 1993 to 1995, Frank was head of Goddard's Theoretical High Energy Astrophysics Office and continued to serve as Head of the Theory group. In 2003 he served as Acting Chief of the Laboratory for High Energy Astrophysics. He retired in 2005 and continued his affiliation with NASA as an emeritus scientist at Goddard until his death. As a youngster, Frank showed the signs of curiosity and initiative that indicated he might become an experimentalist. At the memorial service for Frank, his brother related the stories of how Frank had rigged a hidden microphone to play through the family television as his brother courted a young woman on the front porch swing, and how one of Frank's early chemistry experiments caused all the family silverware to turn black. Although Frank started

  18. Obituary: Frank K. Edmondson (1912-2008)

    Science.gov (United States)

    Pilachowski, Catherine A.; Olson, Margaret K. Edmondson; Edmondson, Frank K., Jr.

    2009-12-01

    Hanging in the basement of Kirkwood Observatory on the Indiana University campus is a battered sign, dated Aug 31, 1932, announcing "Indiana Univ. Eclipse Station." While the path of totality passed well north of Bloomington, IN, where only 80% of the Sun's disk was covered, the eclipse made a lasting impression on the young Frank Kelley Edmondson, then an undergraduate student at Indiana University. Frank was born on August 1, 1912, in Milwaukee, Wisconsin, to Clarence Edward Edmondson and Marie (Kelley) Edmondson. Growing up in Seymour, Indiana, he became interested in astronomy at an early age, reading voraciously from the "Book of Knowledge" at an aunt's house (The Book of Knowledge Set of Encyclopedias). He learned magic and was acquainted with Blackstone, the magician. He took ballet lessons and performed with his brother. He was a YMCA Camp Counselor at Camp Bedford where he taught natural sciences to the campers. He worked one summer as a cook on an ore boat on Lake Michigan. In high school he sang in a musical - and wore a false beard. In 1944 he grew his own beard, one of only two on the IU faculty at the time, and he kept the beard all the many years since. In 1996, Frank was elected to the Shields High School "Wall of Fame." After graduating from Shields High School in 1929, Frank enrolled at Indiana University. He was a member of the IU intercollegiate debate team for four years. He was initiated into Phi Beta Kappa as a junior and was a member of Sigma Xi. He graduated in 1933 and earned a Master's degree in 1934 based on a thesis ("An Analysis of the Radial Velocities of Twenty-One Globular Star Clusters") and professional experience earned while holding the Lawrence Fellowship at the Lowell Observatory in Flagstaff, Arizona in 1934-35, where he worked as an observing assistant to Clyde Tombaugh. Despite his close association with Lowell, Tombaugh, and Pluto, Frank approved of the decision of the International Astronomical Union in 2006 to change

  19. Frank Lloyd Wright in the Soviet Union

    Directory of Open Access Journals (Sweden)

    Brian A. Spencer

    2017-12-01

    Full Text Available In 1937 the First All-Union Congress of Soviet Architects was held in Moscow. The congress brought  architects from all areas of the  Soviet Union. Under the auspices of Vsesoiuvnoe Obshchestvo Kul'turnoi Sviazi s zagranitsei (VOKS it invited international architects from Europe and North and South America.  The Organizing Committee of the Union of Soviet Architects invited Frank Lloyd Wright from the United States. Frank Lloyd Wright presented his philosophy and exhibited his work, specifically his designs for the weekend home for E. J. Kaufmann "Fallingwater" and the drawings for the S.C. Johnson Administration. Frank Lloyd Wright's presentation did not focus heavily on the architecture but, rather the spirit of the Russian and Soviet vision.

  20. Rediscovery of Otto Frank's contribution to science.

    Science.gov (United States)

    Kuhtz-Buschbeck, Johann P; Drake-Holland, Angela; Noble, Mark I M; Lohff, Brigitte; Schaefer, Jochen

    2018-06-01

    In the late 19th century, German physiologist Otto Frank (1865-1944) embarked on a near life-long research program of laying down the mathematical, methodological, and theoretical foundations in order to understand and define the performance of the heart and circulatory system in all their complexity. The existence of the "Frank-Starling law" testifies to this. Two of his seminal publications have been translated into English previously, introducing Frank's research on the dynamics of the heart and the arterial pulse to a wider audience. It is likely that there are a host of other comparable achievements and publications of Frank that are still unknown to the international scientific (cardiological and physiological) community. However, their influence can still be felt and seen in modern cardiology and cardio-physiology, such as in the development of modern interactive simulating and teaching programs. We have translated and commented on ten of these papers, which can be read in parallel with the German originals. These publications show a wealth of theoretical assumptions and projections regarding the importance of the sarcomere, the development of models of contraction, thermo-dynamical considerations for muscular activity, differences between cardiac and skeletal muscles, problems related to methodology and measurement, and the first pressure-volume diagram (published 120 years ago). These topics were envisioned by Frank long before they became a focus of subsequent modern research. Nowadays, frequent measurements of pressure-volume relationships are made in research using the pressure-volume conductance catheter technique. In commenting Frank's scientific topics, we try to show how interconnected his thinking was, and thus how it enabled him to cover such a wide range of subjects. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

  1. Obituary: Frank J. Low (1933-2009)

    Science.gov (United States)

    McCarthy, Don

    2011-12-01

    Frank James Low was born on November 23, 1933, in Mobile, Alabama. He received his undergraduate degree in physics from Yale University in 1955, and his Ph.D. in physics from Rice University in 1959. He worked at Texas Instruments, NRAO, Rice University, and spent most of his career at The University of Arizona with Steward Observatory and the Lunar and Planetary Laboratory. To honor his fundamental insight and innovations that revolutionized the fields of infrared and airborne astronomy, Frank received the Helen B. Warner Prize (1968), the Joseph Weber Award (2003), shared the Rumford Prize in physics (1986), the Karl Jansky Lectureship (2006), and the Bruce Medal (2006) for lifetime contributions in astronomy. This year the world celebrates the International Year of Astronomy, commemorating the accomplishments of Galileo. There are great parallels between Frank and Galileo. After developing a revolutionary low-temperature detector, Frank re-engineered and optimized telescopes for infrared performance. He not only oriented them to the heavens but also placed them there throughout Earth's atmosphere and to the Moon. He made fantastic new discoveries from the Sun throughout the Universe. He radically changed the way the entire world looks at the Universe and impacted generations of new scientists as well as the general public. Frank's level of innovation is stunning and diverse. Chopping and undersized secondary mirrors, cold baffling, cryogenic designs, "Low Dewars," Helium-3 systems, JFET amplifiers for the IRAS satellite, airborne astronomy, the silver-coated 28-inch survey telescope, the MMT, the 36-foot radio dish, Apollo 17 radiometer, television detector systems, infrared microscopes, and on and on. His insights enabled the IRAS and Spitzer missions and contributed to Spacelab2, KAO, SOFIA, NICMOS/HST, JWST, etc. He also established a small business (Infrared Laboratories Inc.) that for more than 40 years has supplied instrumentation to astronomers and semi

  2. Lifetime exposure to low doses of lead in rats: effect on selected parameters of carbohydrate metabolism.

    Science.gov (United States)

    Nováková, Jaroslava; Lukačínová, Agnesa; Lovásová, Eva; Cimboláková, Iveta; Rácz, Oliver; Ništiar, František

    2015-05-01

    The aim of the study was to assess the effects of exposure to low doses of lead dissolved in drinking water (average daily dose of 2.2 mg kg(-1) day(-1)) on selected carbohydrate metabolism parameters in 20 wistar rats. Animals were divided into two groups - control (C) (group drinking clear water) and experimental group (Pb; group exposed to low doses of lead acetate in a concentration of 100 μmol l(-1) of drinking water). In this study, we studied the biochemical parameters (glucose, haemoglobin (Hb), glycated haemoglobin (HbA1c), lactate dehydrogenase (LDH) and amylase (AMS)) in rat blood. Glucose and Hb concentration and AMS activity decreased, LDH activity increased but HbA1c concentration levels did not change in rats exposed to lead. Our results well documented that lifetime exposure to lead affected carbohydrate metabolism of rats. Some parameters like concentration of Hb as well as activities of AMS and LDH are useful markers of intoxication of rats with lead. For the evaluation of results (e.g. AMS), not only the data at the end of the experiment should be taken into account but also the entire duration of trials (i.e. more time steps) that makes results more objective should be considered. © The Author(s) 2013.

  3. A Frank mixture copula family for modeling higher-order correlations of neural spike counts

    International Nuclear Information System (INIS)

    Onken, Arno; Obermayer, Klaus

    2009-01-01

    In order to evaluate the importance of higher-order correlations in neural spike count codes, flexible statistical models of dependent multivariate spike counts are required. Copula families, parametric multivariate distributions that represent dependencies, can be applied to construct such models. We introduce the Frank mixture family as a new copula family that has separate parameters for all pairwise and higher-order correlations. In contrast to the Farlie-Gumbel-Morgenstern copula family that shares this property, the Frank mixture copula can model strong correlations. We apply spike count models based on the Frank mixture copula to data generated by a network of leaky integrate-and-fire neurons and compare the goodness of fit to distributions based on the Farlie-Gumbel-Morgenstern family. Finally, we evaluate the importance of using proper single neuron spike count distributions on the Shannon information. We find notable deviations in the entropy that increase with decreasing firing rates. Moreover, we find that the Frank mixture family increases the log likelihood of the fit significantly compared to the Farlie-Gumbel-Morgenstern family. This shows that the Frank mixture copula is a useful tool to assess the importance of higher-order correlations in spike count codes.

  4. Clinical, Toxicological, Biochemical, and Hematologic Parameters in Lead Exposed Workers of a Car Battery Industry

    Directory of Open Access Journals (Sweden)

    Sina Kianoush

    2013-03-01

    Full Text Available Background: Lead is a toxic element which causes acute, subacute or chronic poisoning through environmental and occupational exposure. The aim of this study was to investigate clinical and laboratory abnormalities of chronic lead poisoning among workers of a car battery industry. Methods: Questionnaires and forms were designed and used to record demographic data, past medical histories and clinical manifestations of lead poisoning. Blood samples were taken to determine biochemical (using Auto Analyzer; Model BT3000 and hematologic (using Cell Counter Sysmex; Model KX21N parameters. An atomic absorption spectrometer (Perkin-Elmer, Model 3030, USA was used to determine lead concentration in blood and urine by heated graphite atomization technique. Results: A total of 112 men mean age 28.78±5.17 years, who worked in a car battery industry were recruited in the present study. The most common signs/symptoms of lead poisoning included increased excitability 41.9%, arthralgia 41.0%, fatigue 40.1%, dental grey discoloration 44.6%, lead line 24.1%, increased deep tendon reflexes (DTR 22.3%, and decreased DTR (18.7%. Blood lead concentration (BLC was 398.95 µg/L±177.40, which was significantly correlated with duration of work (P=0.044 but not with the clinical manifestations of lead poisoning. However, BLC was significantly correlated with urine lead concentration (83.67 µg/L±49.78; r2=0.711; P<0.001, mean corpuscular hemoglobin (r=-0.280; P=0.011, mean corpuscular hemoglobin concentration (r=-0.304; P=0.006 and fasting blood sugar or FBS (r=-0.258; P=0.010. Conclusion: Neuropsychiatric and skeletal findings were common manifestations of chronic occupational lead poisoning. BLC was significantly correlated with duration of work, urine lead concentration, two hemoglobin indices and FBS.

  5. Clinical, Toxicological, Biochemical, and Hematologic Parameters in Lead Exposed Workers of a Car Battery Industry

    Science.gov (United States)

    Kianoush, Sina; Balali-Mood, Mahdi; Mousavi, Seyed Reza; Shakeri, Mohammad Taghi; Dadpour, Bita; Moradi, Valiollah; Sadeghi, Mahmoud

    2013-01-01

    Background: Lead is a toxic element which causes acute, subacute or chronic poisoning through environmental and occupational exposure. The aim of this study was to investigate clinical and laboratory abnormalities of chronic lead poisoning among workers of a car battery industry. Methods: Questionnaires and forms were designed and used to record demographic data, past medical histories and clinical manifestations of lead poisoning. Blood samples were taken to determine biochemical (using Auto Analyzer; Model BT3000) and hematologic (using Cell Counter Sysmex; Model KX21N) parameters. An atomic absorption spectrometer (Perkin-Elmer, Model 3030, USA) was used to determine lead concentration in blood and urine by heated graphite atomization technique. Results: A total of 112 men mean age 28.78±5.17 years, who worked in a car battery industry were recruited in the present study. The most common signs/symptoms of lead poisoning included increased excitability 41.9%, arthralgia 41.0%, fatigue 40.1%, dental grey discoloration 44.6%, lead line 24.1%, increased deep tendon reflexes (DTR) 22.3%, and decreased DTR (18.7%). Blood lead concentration (BLC) was 398.95 µg/L±177.40, which was significantly correlated with duration of work (P=0.044) but not with the clinical manifestations of lead poisoning. However, BLC was significantly correlated with urine lead concentration (83.67 µg/L±49.78; r2=0.711; Psugar or FBS (r=-0.258; P=0.010). Conclusion: Neuropsychiatric and skeletal findings were common manifestations of chronic occupational lead poisoning. BLC was significantly correlated with duration of work, urine lead concentration, two hemoglobin indices and FBS. PMID:23645955

  6. Clinical, toxicological, biochemical, and hematologic parameters in lead exposed workers of a car battery industry.

    Science.gov (United States)

    Kianoush, Sina; Balali-Mood, Mahdi; Mousavi, Seyed Reza; Shakeri, Mohammad Taghi; Dadpour, Bita; Moradi, Valiollah; Sadeghi, Mahmoud

    2013-03-01

    Lead is a toxic element which causes acute, subacute or chronic poisoning through environmental and occupational exposure. The aim of this study was to investigate clinical and laboratory abnormalities of chronic lead poisoning among workers of a car battery industry. Questionnaires and forms were designed and used to record demographic data, past medical histories and clinical manifestations of lead poisoning. Blood samples were taken to determine biochemical (using Auto Analyzer; Model BT3000) and hematologic (using Cell Counter Sysmex; Model KX21N) parameters. An atomic absorption spectrometer (Perkin-Elmer, Model 3030, USA) was used to determine lead concentration in blood and urine by heated graphite atomization technique. A total of 112 men mean age 28.78±5.17 years, who worked in a car battery industry were recruited in the present study. The most common signs/symptoms of lead poisoning included increased excitability 41.9%, arthralgia 41.0%, fatigue 40.1%, dental grey discoloration 44.6%, lead line 24.1%, increased deep tendon reflexes (DTR) 22.3%, and decreased DTR (18.7%). Blood lead concentration (BLC) was 398.95 µg/L±177.40, which was significantly correlated with duration of work (P=0.044) but not with the clinical manifestations of lead poisoning. However, BLC was significantly correlated with urine lead concentration (83.67 µg/L±49.78; r(2)=0.711; Psugar or FBS (r=-0.258; P=0.010). Neuropsychiatric and skeletal findings were common manifestations of chronic occupational lead poisoning. BLC was significantly correlated with duration of work, urine lead concentration, two hemoglobin indices and FBS.

  7. Identification of lead acid battery parameters using kalman filtering in photovoltaic system

    International Nuclear Information System (INIS)

    Boutte, Aissa

    2006-01-01

    The conventional methods of battery identification parameters consist in estimating the state of charge (SOC), and in establishing a command adapted to charge or to discharge the battery, based on electrical model developed with fixed parameters, These methods are inefficient. The causes of this ineffectiveness are different: In the first place model does not adapt itself with the battery (fixed parameters, lack of modulated parameters, a big non-linearity ...).Secondly, the impossibility for the developed algorithms, to adapt itself with the change of the battery's parameters. New models of identification are used by combining the conventional methods with adaptive and dynamic techniques. They already used in other domains where they have proved a good efficiency and a robustness. Taking into consideration the problems mentioned, and trying to resolve them, we have chosen among the various methods of estimation, Kalman filter (KF) known for its efficiency, in the field of tracking parameters. In this work we try tp represent new ideas, to identify battery parameters using KF method and make an experimental analysis of the performance of this method by using Lead Acid Battery, which is a part of a photovoltaic system (PV).(Author)

  8. Lead tolerance of Populus nigra in symbiosis with arbuscular mycorrhizal fungi in relation to physiological parameters

    International Nuclear Information System (INIS)

    Salehi, A.; Tabari, M.; Mohammadi Goltapeh, E.; Shirvani, A.

    2016-01-01

    With the aim to examine lead tolerance of Populus nigra (clone 62/154) in symbiosis witharbuscular mycorrhizal fungi, a greenhouse experiment was carried out in a factorial randomized complete scheme with two factors 1) fungal inoculation in 4 levels (control, inoculation with Glomus mosseae, inoculation with G. intraradices and inoculation with G. mosseae+G. intraradices) and 2) lead in 4 levels (0, 100, 500 and 1000 mg kg-1 soil). Mycorrhizal colonization and physiological parameters of plants were measured at the end of growth season. Results showed that at all Pb levels, the percentage of root mycorrhizal colonization in fungal treatments was significantly higher than that in control treatment (without fungal inoculation), however without significant differences between 3 fungal treatments. Pb treatments had no significant effect on root mycorrhizal colonization of P. nigra plants. Also, photosynthesis, stomatal conductance, transpiration, intercellular CO2 concentration and water use efficiency of P. nigra plants had no significant inhibitory effects versus the control found under Pb and fungal treatments or their interaction.The results of present study demonstrated that fungal treatments had no significant effects on physiological parameters and Pb tolerance of P. nigraplants. While, in relation to mycorrhizal colonization and physiological parameters, P. nigra clone 62/154 showeda good tolerance to Pb stress. So, in further investigations of phytoremediation of lead-contaminated soils, this clone can be considered as a proposed species.

  9. Analysis of the hematological and biochemical parameters related to lead intoxication.

    Science.gov (United States)

    Yılmaz, Hınç; Keten, Alper; Karacaoğlu, Emre; Tutkun, Engin; Akçan, Ramazan

    2012-11-01

    In parallel with industrial advancements, number of the occupational diseases secondary to chemical exposure is increasing. The chemical agents in the work places affect various organ and tissue systems, leading to chronic diseases. In this study, the cases diagnosed with occupational disease due to exposure to lead were studied and importance of the environmental forensic sciences on this issue was emphasized. A hundred and ninety patients diagnosed with occupational disease related to lead intoxication in Ankara Occupational Diseases Hospital between 01/01/2009 and 31/12/2009 were included in the study. Twenty cases were used as the controls. Sociodemographic characteristics, serum chemical parameters and hematological parameters of the patients were retrospectively assessed. Mean age of the cases included in the study was 35.3±8.69. Hemoglobin (Hb) (p=0.018) and Mean corpuscular volume (MCV) (plead exposure than in the controls. Gamma glutamyl transferase (GGT) was significantly lower in the patients with lead exposure than in the controls (p=0.002), whereas alkaline phosphatase (ALP) was found higher (plead exposure than in the control group (p=0.01), while Thyrotrophin-stimulating hormone (TSH) levels were lower (plead (Pb) was correlated positively with ALP values and negatively with Hb, MCV and TSH. Considering its effects on the biochemical and hematological parameters, a detailed investigation should be carried out in the cases with lead exposure, which occupies an important place among the occupational diseases. Copyright © 2012 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

  10. PARAMETERS COMPARSION OF LEADS DETECTION IN ARCTIC SEA ICE USING CRYOSAT-2 WAVEFORM DATA

    Directory of Open Access Journals (Sweden)

    J. Li

    2018-04-01

    Full Text Available Leads are only a small part of the polar sea ice structure, but they play a dominant role on the turbulence exchange between the ocean and the atmosphere, they are also important factors about sea ice thickness inversion. Since the early 2000s, Satellite altimetry has been applied to monitor the Arctic sea ice thickness, Satellite altimetry data can be used to distinguish leads and sea ice. In this paper, four parameters including Pulse peakiness (PP, stack standard deviation (SSD, stack kurtosis (SKU and stack skewness (SSK are extracted from CryoSat-2 satellite altimetry waveform data. The four parameters are combined into five combinations (PP, PP&SSD, PP&SSD&SKU, PP&SSD&SSK, PP&SSD&SSK&SKU with constrain conditions to detect the leads. The results of the five methods are compared with MODIS (moderate-resolution imagining spectroradiometer images and show that, the combination of PP&SSD is better than the single PP, the rest of combinations are the same as the combination of PP&SSD. It turns out, there is no promotion when we add SSK and SKU, successively or simultaneously.

  11. Parameters Comparsion of Leads Detection in Arctic Sea Ice Using CRYOSAT-2 Waveform Data

    Science.gov (United States)

    Li, J.; Zhang, S.; Xiao, F.; Zhu, C.; Zhang, Y.; Zhu, T.; Yuan, L.

    2018-04-01

    Leads are only a small part of the polar sea ice structure, but they play a dominant role on the turbulence exchange between the ocean and the atmosphere, they are also important factors about sea ice thickness inversion. Since the early 2000s, Satellite altimetry has been applied to monitor the Arctic sea ice thickness, Satellite altimetry data can be used to distinguish leads and sea ice. In this paper, four parameters including Pulse peakiness (PP), stack standard deviation (SSD), stack kurtosis (SKU) and stack skewness (SSK) are extracted from CryoSat-2 satellite altimetry waveform data. The four parameters are combined into five combinations (PP, PP&SSD, PP&SSD&SKU, PP&SSD&SSK, PP&SSD&SSK&SKU) with constrain conditions to detect the leads. The results of the five methods are compared with MODIS (moderate-resolution imagining spectroradiometer) images and show that, the combination of PP&SSD is better than the single PP, the rest of combinations are the same as the combination of PP&SSD. It turns out, there is no promotion when we add SSK and SKU, successively or simultaneously.

  12. 77 FR 56242 - Dodd-Frank Investor Advisory Committee

    Science.gov (United States)

    2012-09-12

    ... Investor Advisory Committee AGENCY: Securities and Exchange Commission. ACTION: Notice of Meeting of Securities and Exchange Commission Dodd- Frank Investor Advisory Committee. SUMMARY: The Securities and Exchange Commission Investor Advisory Committee, established pursuant to Section 911 of the Dodd-Frank Wall...

  13. 78 FR 43254 - Dodd-Frank Investor Advisory Committee

    Science.gov (United States)

    2013-07-19

    ... Investor Advisory Committee AGENCY: Securities and Exchange Commission. ACTION: Notice of Meeting of Securities and Exchange Commission Dodd- Frank Investor Advisory Committee. SUMMARY: The Securities and Exchange Commission Investor Advisory Committee, established pursuant to Section 911 of the Dodd-Frank Wall...

  14. 78 FR 20156 - Dodd-Frank Investor Advisory Committee

    Science.gov (United States)

    2013-04-03

    ... Investor Advisory Committee AGENCY: Securities and Exchange Commission. ACTION: Notice of Meeting of Securities and Exchange Commission Dodd- Frank Investor Advisory Committee. SUMMARY: The Securities and Exchange Commission Investor Advisory Committee, established pursuant to Section 911 of the Dodd-Frank Wall...

  15. 78 FR 2706 - Dodd-Frank Investor Advisory Committee

    Science.gov (United States)

    2013-01-14

    ... Investor Advisory Committee AGENCY: Securities and Exchange Commission. ACTION: Notice of Meeting of Securities and Exchange Commission Dodd- Frank Investor Advisory Committee. SUMMARY: The Securities and Exchange Commission Investor Advisory Committee, established pursuant to Section 911 of the Dodd-Frank Wall...

  16. 77 FR 29705 - Dodd-Frank Investor Advisory Committee

    Science.gov (United States)

    2012-05-18

    ... Investor Advisory Committee AGENCY: Securities and Exchange Commission. ACTION: Notice of First Meeting of Securities and Exchange Commission Dodd-Frank Investor Advisory Committee. SUMMARY: The Securities and Exchange Commission Investor Advisory Committee, established pursuant to Section 911 of the Dodd-Frank Wall...

  17. Association of Lead Exposure, Serum Uric Acid and Parameters of Renal Function in Nigerian Lead-Exposed Workers

    Directory of Open Access Journals (Sweden)

    DD Alasia

    2010-09-01

    Full Text Available Background: The presence of hyperuricemia and renal function impairment, especially in the absence of urate stone formation is strongly suggestive of lead nephropathy. The evaluation of this association is essential in areas where lead exposure is still prevalent and uncontrolled. Objective: To determine the relationship between serum uric acid and renal function indices in lead-exposed workers. Methods: A cross-sectional study of 190 adults with occupational lead exposure and 80 adults (comparison group, matched for age and sex was performed in Port Harcourt, South-south Nigeria. Blood lead was used as the biomarker of lead exposure while serum urea, serum creatinine, urine albumin (using urine albumin:creatinine ratio, estimated glomerular filtration rate (GFR and serum uric acid were the renal function indices measured. Results: Occupationally lead-exposed subjects had a significantly (p = 0.008 higher mean±SD blood lead levels (50.37±24.58 μg/dL than the comparison group (41.40±26.85. The mean±SD serum urea (8.6±2.3 mg/dL, creatinine (1.0±0.2 mg/dL and serum uric acid (4.6±1.2 mg/dL were significantly (p < 0.01 higher in the study subjects than the comparison group (7.6±2.4, 0.9±0.2, and 3.9±1.1 mg/dL, respectively. The mean±SD creatinine clearance was significantly (p = 0.002 lower in the study subjects than the comparison group (98.9±21.3 vs. 108.2±25.2 mL/min/1.72 m2. Serum uric acid level correlated positively with serum creatinine (r = 0.134 and negatively with GFR (r = ‑0.151. Conclusion: People with occupational lead exposure are at risk of developing hyperuricemia and renal impairment.

  18. Landau–De Gennes Theory of Nematic Liquid Crystals: the Oseen–Frank Limit and Beyond

    KAUST Repository

    Majumdar, Apala

    2009-07-07

    We study global minimizers of a continuum Landau-De Gennes energy functional for nematic liquid crystals, in three-dimensional domains, subject to uniaxial boundary conditions. We analyze the physically relevant limit of small elastic constant and show that global minimizers converge strongly, in W1,2, to a global minimizer predicted by the Oseen-Frank theory for uniaxial nematic liquid crystals with constant order parameter. Moreover, the convergence is uniform in the interior of the domain, away from the singularities of the limiting Oseen-Frank global minimizer. We obtain results on the rate of convergence of the eigenvalues and the regularity of the eigenvectors of the Landau-De Gennes global minimizer. We also study the interplay between biaxiality and uniaxiality in Landau-De Gennes global energy minimizers and obtain estimates for various related quantities such as the biaxiality parameter and the size of admissible strongly biaxial regions. © Springer-Verlag (2009).

  19. Landau–De Gennes Theory of Nematic Liquid Crystals: the Oseen–Frank Limit and Beyond

    KAUST Repository

    Majumdar, Apala; Zarnescu, Arghir

    2009-01-01

    We study global minimizers of a continuum Landau-De Gennes energy functional for nematic liquid crystals, in three-dimensional domains, subject to uniaxial boundary conditions. We analyze the physically relevant limit of small elastic constant and show that global minimizers converge strongly, in W1,2, to a global minimizer predicted by the Oseen-Frank theory for uniaxial nematic liquid crystals with constant order parameter. Moreover, the convergence is uniform in the interior of the domain, away from the singularities of the limiting Oseen-Frank global minimizer. We obtain results on the rate of convergence of the eigenvalues and the regularity of the eigenvectors of the Landau-De Gennes global minimizer. We also study the interplay between biaxiality and uniaxiality in Landau-De Gennes global energy minimizers and obtain estimates for various related quantities such as the biaxiality parameter and the size of admissible strongly biaxial regions. © Springer-Verlag (2009).

  20. Parameters promoting liquid metal embrittlement of the T91 steel in lead-bismuth eutectic alloy

    International Nuclear Information System (INIS)

    Proriol Serre, I.; Ye, C.; Vogt, J.B.

    2015-01-01

    The use of liquid lead-bismuth eutectic (LBE) as a spallation target and a coolant in accelerator-driven systems raises the question of the reliability of structural materials, such as T91 martensitic steel in terms of liquid metal assisted damage and corrosion. In this study, the mechanical behaviour of the T91 martensitic steel was examined in liquid lead-bismuth eutectic (LBE) and in inert atmosphere. Several conditions showed the most sensitive embrittlement factor. The Small Punch Test technique was employed using smooth specimens. In this standard heat treatment, T91 appeared in general as a ductile material, and became brittle in the considered conditions if the test was performed in LBE. It turns out that the loading rate appeared as a critical parameter for the occurrence of liquid metal embrittlement (LME) of the T91 steel in LBE. Loading the T91 very slowly instead of rapidly in oxygen saturated LBE resulted in brittle fracture. Furthermore, low-oxygen content in LBE and an increase in temperature promote LME. (authors)

  1. Lead-acid batteries in micro-hybrid applications. Part I. Selected key parameters

    Science.gov (United States)

    Schaeck, S.; Stoermer, A. O.; Kaiser, F.; Koehler, L.; Albers, J.; Kabza, H.

    Micro-hybrid electric vehicles were launched by BMW in March 2007. These are equipped with brake energy regeneration (BER) and the automatic start and stop function (ASSF) of the internal combustion engine. These functions are based on common 14 V series components and lead-acid (LA) batteries. The novelty is given by the intelligent onboard energy management, which upgrades the conventional electric system to the micro-hybrid power system (MHPS). In part I of this publication the key factors for the operation of LA batteries in the MHPS are discussed. Especially for BER one is high dynamic charge acceptance (DCA) for effective boost charging. Vehicle rest time is identified as a particular negative parameter for DCA. It can be refreshed by regular fully charging at elevated charge voltage. Thus, the batteries have to be outstandingly robust against overcharge and water loss. This can be accomplished for valve-regulated lead-acid (VRLA) batteries at least if they are mounted in the trunk. ASSF goes along with frequent high-rate loads for warm cranking. The internal resistance determines the drop of the power net voltage during cranking and is preferably low for reasons of power net stability even after years of operation. Investigations have to be done with aged 90 Ah VRLA-absorbent glass mat (AGM) batteries. Battery operation at partial state-of-charge gives a higher risk of deep discharging (overdischarging). Subsequent re-charging then is likely to lead to the formation of micro-short circuits in the absorbent glass mat separator.

  2. Effects of blood lead level on biochemical and hematological parameters in children with neurological diseases of Western Maharashtra, India.

    Science.gov (United States)

    Pratinidhi, Shilpa A; Patil, Arun J; Behera, Manaskumar; Patil, Maya; Ghadage, Dnyaneshwari P; Pratinidhi, Asha K

    2014-05-01

    Lead is found in small but appreciable quantities in air, soil, drinking water, and food. Exposure to such amounts of lead does not lead to acute lead toxicity but produces subtle effects particularly in children. The aim of this study was to investigate the effects of blood lead level on biochemical and hematological parameters in children with neurological diseases in Western Maharashtra, India, and to estimate the blood lead level by liver and kidney function tests and hematological parameters in children with neurological disorders admitted to the pediatric ward and compare them with healthy controls. In this study, 30 children with various neurological disorders admitted to the pediatric ward of Smt. Kashibai Navale Medical College and General Hospital, Pune, Maharashtra, India, were compared with 30 age- and sex-matched healthy controls. Four milliliters of venous blood was collected for estimation of blood lead level, and biochemical and hematological parameters were determined using standard methods. Blood lead level was significantly increased in the study group (plead levels, there was a significant difference between the groups. All other biochemical and hematological parameters were not significantly altered in the study group as compared to the control group. Neurologically challenged children are more vulnerable to lead intoxication. It is imperative for the parents to take extra care of their children's food habits and limit hand-to-mouth activities to prevent lead intoxication.

  3. 78 FR 68887 - Dodd-Frank Investor Advisory Committee; Meeting

    Science.gov (United States)

    2013-11-15

    ... Investor Advisory Committee; Meeting AGENCY: Securities and Exchange Commission. ACTION: Notice of Meeting of Securities and Exchange Commission Dodd- Frank Investor Advisory Committee. SUMMARY: The Securities and Exchange Commission Investor Advisory Committee, established pursuant to Section 911 of the...

  4. Clinical, Toxicological, Biochemical, and Hematologic Parameters in Lead Exposed Workers of a Car Battery Industry

    OpenAIRE

    Kianoush, Sina; Balali-Mood, Mahdi; Mousavi, Seyed Reza; Shakeri, Mohammad Taghi; Dadpour, Bita; Moradi, Valiollah; Sadeghi, Mahmoud

    2013-01-01

    Background: Lead is a toxic element which causes acute, subacute or chronic poisoning through environmental and occupational exposure. The aim of this study was to investigate clinical and laboratory abnormalities of chronic lead poisoning among workers of a car battery industry. Methods: Questionnaires and forms were designed and used to record demographic data, past medical histories and clinical manifestations of lead poisoning. Blood samples were taken to determine biochemical (using Auto...

  5. Parameter definition using vibration prediction software leads to significant drilling performance improvements

    Energy Technology Data Exchange (ETDEWEB)

    Amorim, Dalmo; Hanley, Chris Hanley; Fonseca, Isaac; Santos, Juliana [National Oilwell Varco, Houston TX (United States); Leite, Daltro J.; Borella, Augusto; Gozzi, Danilo [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)

    2012-07-01

    field monitoring. Vibration prediction diminishes the importance of trial-and-error procedures such as drill-off tests, which are valid only for short sections. It also solves an existing lapse in Mechanical Specific Energy (MSE) real-time drilling control programs applying the theory of Teale, which states that a drilling system is perfectly efficient when it spends the exact energy to overcome the in situ rock strength. Using the proprietary software tool this paper will examine the resonant vibration modes that may be initiated while drilling with different BHA's and drill string designs, showing that the combination of a proper BHA design along with the correct selection of input parameters results in an overall improvement to drilling efficiency. Also, being the BHA predictively analyzed, it will be reduced the potential for vibration or stress fatigue in the drill string components, leading to a safer operation. In the recent years there has been an increased focus on vibration detection, analysis, and mitigation techniques, where new technologies, like the Drilling Dynamics Data Recorders (DDDR), may provide the capability to capture high frequency dynamics data at multiple points along the drilling system. These tools allow the achievement of drilling performance improvements not possible before, opening a whole new array of opportunities for optimization and for verification of predictions calculated by the drill string dynamics modeling software tool. The results of this study will identify how the dynamics from the drilling system, interacting with formation, directly relate to inefficiencies and to the possible solutions to mitigate drilling vibrations in order to improve drilling performance. Software vibration prediction and downhole measurements can be used for non-drilling operations like drilling out casing or reaming, where extremely high vibration levels - devastating to the cutting structure of the bit before it has even touched bottom - have

  6. Frank-ter Haar syndrome with unusual clinical features.

    Science.gov (United States)

    Dundar, Munis; Saatci, Cetin; Tasdemir, Sener; Akcakus, Mustafa; Caglayan, Ahmet Okay; Ozkul, Yusuf

    2009-01-01

    Frank-ter Haar syndrome first recognized by Frank et al. [Y. Frank, M. Ziprkowski, A. Romano, R. Stein, M.B. Katznelson, B. Cohen, R.M. Goodman, Megalocornea associated with multiple skeletal anomalies: a new genetic syndrome?, J. Genet. Hum. 21 (1973) 67-72.] and subsequently confirmed by ter Haar et al. [B. Ter Haar, B. Hamel, J. Hendriks, J. de Jager, Melnick-Needles syndrome: indication for an autosomal recessive form, Am. J. Med. Genet. 13 (1982) 469-477.]. The main clinical features of the syndrome are brachycephaly, wide fontanels, prominent forehead, hypertelorism, prominent eyes, macro cornea with or without glaucoma, full cheeks, small chin, bowing of the long bones, and flexion deformity of the fingers [S.M. Maas, H. Kayserili, J. Lam, M.Y. Apak, R.C. Hennekam, Further delineation of Frank-ter Haar syndrome, Am. J. Med. Genet. 131 (2004) 127-133.]. We report a child with Frank-ter Haar syndrome presenting unusual clinical features. Hypopigmented areas in hair, bilateral adducted thumb, bilateral contractures in elbows and pelvic limb, atrial septal defect have not been described previously in the literature. Our patient also had double-outlet right ventricle.

  7. Frank-ter Haar syndrome--additional findings?

    Science.gov (United States)

    Köse, Taha Emre; İşler, Cemil; Şenel, Ş Neslihan; Şitilci, Tolga; Özcan, İlknur; Aksakallı, Nihan

    2016-01-01

    Frank-ter Haar syndrome is a genetic disease that is transmitted by autosomal recessive pattern with characteristic features such as megalocornea or glaucoma, a prominent coccyx, heart defects, developmental delays, brachycephaly, a wide anterior fontanel, finger flexion deformities, full cheeks and micrognathia. Dentomaxillofacial features of this syndrome are not well documented in the literature. We present of a 21-year-old male with Frank-ter Haar syndrome and some features that may be linked with this syndrome not reported before in the literature.

  8. Thermal neutron pulsed parameters in non-hydrogenous systems. Experiment for lead grains

    International Nuclear Information System (INIS)

    Drozdowicz, K.; Gabanska, B.; Kosik, M.; Krynicka, E.; Woznicka, U.; Zaleski, T.

    1997-01-01

    In Czubek's method of measurement of the thermal neutron macroscopic absorption cross section a two-region geometry is applied where the investigated sample is surrounded by an external moderator. Both regions in the measurements made up till now were hydrogenous, which means the same type of the thermal neutron transport properties. In the paper a theoretical consideration to use non-hydrogenous materials as the samples is presented. Pulsed neutron measurements have been performed on homogeneous material in a geometry of the classic experiment with the variable geometric buckling. Two decay constants have been measured for different cylindrical samples of small lead grains (a lead shot). (author)

  9. Nietzsche contra Superman: An Examination of the work of Frank ...

    African Journals Online (AJOL)

    This paper investigates the work of Frank Miller, particularly his Batman: The Dark Knight Returns, in light of Nietzschean aesthetics and social commentary. A graphic novelist, and thus nominally an entertainer of the masses, Miller uses the comic medium to challenge, aesthetically and intellectually. Batman: The Dark ...

  10. Frank-Ter Haar syndrome in a newborn.

    Science.gov (United States)

    Femitha, P; Joy, Rojo; Gane, Bahubali D; Adhisivam, B; Bhat, B Vishnu

    2012-08-01

    Frank-Ter Haar syndrome is an unusual type of skeletal dysplasia with megalocornea and developmental delay. It is usually transmitted as autosomal recessive disorder. Only a few cases have been reported in the literature and none from India. The authors report a case with other unusual features and a short review of the condition.

  11. Thermodynamic, Kinetic, and Equilibrium Parameters for the Removal of Lead and Cadmium from Aqueous Solutions with Calcium Alginate Beads

    Directory of Open Access Journals (Sweden)

    Ruth Alfaro-Cuevas-Villanueva

    2014-01-01

    Full Text Available The sorption of cadmium (Cd and lead (Pb by calcium alginate beads (CAB from aqueous solutions in batch systems was investigated. The kinetic and thermodynamic parameters, as well as the sorption capacities of CAB in each system at different temperatures, were evaluated. The rate of sorption for both metals was rapid in the first 10 minutes and reached a maximum in 50 minutes. Sorption kinetic data were fitted to Lagergren, pseudo-second-order and Elovich models and it was found that the second-order kinetic model describes these data for the two metals; comparing kinetic parameters for Cd and Pb sorption a higher kinetic rate (K2 for Pb was observed, indicating that the interaction between lead cations and alginate beads was faster than for cadmium. Similarly, isotherm data were fitted to different models reported in literature and it was found that the Langmuir-Freundlich (L-F and Dubinin-Radushkevich (D-R models describe the isotherms in all cases. CAB sorption capacity for cadmium was 27.4 mg/g and 150.4 mg/g for lead, at 25°C. Sorption capacities of Cd and Pb increase as temperature rises. According to the thermodynamic parameters, the cadmium and lead adsorption process was spontaneous and endothermic. It was also found that pH has an important effect on the adsorption of these metals by CAB, as more were removed at pH values between 6 and 7.

  12. Parameters leading to a successful radiographic outcome following surgical treatment for Lenke 2 curves.

    Science.gov (United States)

    Koller, Heiko; Meier, Oliver; McClung, Anna; Hitzl, Wolfgang; Mayer, Michael; Sucato, Daniel

    2015-07-01

    In Lenke 2 curves, there are conflicting data when to include the PTC into the fusion. Studies focusing on Lenke 2 curves are scant. The number of patients with significant postoperative shoulder height difference (SHD) or trunk shift (TS) is as high as 30 % indicating further research. Therefore, the purpose of the current study was to improve understanding of curve resolution and shoulder balance following surgical correction of Lenke 2 curves as well as the identification of radiographic parameters predicting postoperative curve resolution, shoulder and trunk balance in perspective of inclusion/exclusion of the proximal thoracic curve (PTC). This is a retrospective study of a 158 Lenke 2 curves. Serial radiographs were analyzed for the main thoracic curve (MTC), PTC, and lumbar curve (LC), SHD, clavicle angle (CA), T-1 tilt, deviation of the central sacral vertical line (CSVL) off the C7 plumb line.Patients were stratified whether the PTC was included in the fusion (+PTC group, n = 60) or not (-PTC group, n = 98). Intergroup results were studied. Compensatory mechanisms for SHD were studied in detail. Adding-on distally was defined as an increase of the lowest instrumented vertebra adjacent disc angle (LIVDA) >3°. Stepwise regression analyses were performed to establish predictive radiographic parameters. At follow-up averaging 24 months significant differences between the +PTC and -PTC group existed for the PTC (24° vs 28°, p 5° (27 vs 53 %, p 2 cm) was 9 (6 %): 7 in the -PTC vs 2 in the +PTC group (p = .03). Utilization of compensatory mechanisms (99 vs 83 %, p Statistics showed postoperative SHD improvement in both the +PTC and -PTC groups. There were no significant differences regarding SHD, CA and T1-Tilt between groups. However, only in the -PTC group, a significant change between postoperative and follow-up SHD existed (p = .02). Statistics identified a preoperative 'left shoulder up' (p statistical model only for the -PTC group showed 9 parameters

  13. Certifying procedures for lead tungstate crystal parameters during mass production for the CMS ECAL

    CERN Document Server

    Auffray, Etiennette; Chipaux, Rémi; Drobychev, G Yu; Dromby, G; Fedorov, A A; Freire, M; Géléoc, M; Kondratev, O V; Korzhik, M V; Lecoq, P; Le Goff, J M; Letournel, P; Lopatic, A R; Missevitch, O V; Oriboni, A; Oskine, A V; Panov, B M; Peigneux, J P; Schneegans, M; Singovsky, A V; Zouevski, R F

    1998-01-01

    Certifying procedures and fully automated equipment for testing of Pb WO/sub 4/ (PWO) scintillators have been developed. The parameters to be verified are the optical transmission spectra in the longitudinal and transversal $9 directions; the light yield and its non-uniformity along the crystal; the scintillation kinetics; the radiation hardness and the dimensions. Both the precision of measurements and the output rate meet the stringent requirements of $9 the mass production stage of PWO scintillating elements for the CMS electromagnetic calorimeter at CERN (full characterization of several tens of crystals per day for five years). This is achieved by a) the implementation of a $9 `start- stop' technique with high count rate capability for scintillation decay measurement; b) the development of special compact fast scanning spectrophotometers; c) the application of a multi-axis movement system for crystal and $9 spectrometers; d) the use of a standard programmable 3D machine for precise dimension measurement....

  14. Correlations between blood lead levels and some physiological and biochemical parameters of nutritional importance in some Nigerian women

    International Nuclear Information System (INIS)

    Ojo, J.O.; Oketayo, O.O.; Salawu, A.A.

    2011-01-01

    Lead is one of the common toxic materials widely occurring in the Nigerian environment. Even with the change to unleaded petrol, other significant sources still remain to be addressed. The deleterious impact of lead on human health, is well documented. The effects range from attention-grabbing mass mortality - as happened in Zamfara State recently, to no less serious but grossly neglected neurocognitive and neurodevelopmental effects, including lowered intelligence quotient scores. All these impacts are most serious in children, especially fetuses who receive their burden from their mothers. Ninety percent of lead in most adults resides in the bones with a half-life measured in decades. Therefore, fetuses and breast-fed children in this generation will remain seriously at risk of exposure to damaging lead levels no matter the efforts to rid our external environment of lead in the years to come. In this work, we have investigated the correlation between Blood Lead Levels (BLL) and up to 35 physiological and biochemical parameters of nutritional importance in 62 women of child-bearing age from lIe-lfe, Nigeria. BLL was determined in venous blood using Inductively- coupled plasma Mass Spectrometry. Our results show that BLL significantly correlates with Packed Cell Volume (PCV), Creatine Clearance, and the ratio of Low-density Lipids to High density Lipids in these women. When the subjects were stratified into different Nutritional Status group based on their Body Mass Index, significant correlation was found between BLL and Age but only in Obese subjects.

  15. Use of the Frank sequence in pulsed EPR

    DEFF Research Database (Denmark)

    Tseitlin, Mark; Quine, Richard W.; Eaton, Sandra S.

    2011-01-01

    The Frank polyphase sequence has been applied to pulsed EPR of triarylmethyl radicals at 256MHz (9.1mT magnetic field), using 256 phase pulses. In EPR, as in NMR, use of a Frank sequence of phase steps permits pulsed FID signal acquisition with very low power microwave/RF pulses (ca. 1.5m......W in the application reported here) relative to standard pulsed EPR. A 0.2mM aqueous solution of a triarylmethyl radical was studied using a 16mm diameter cross-loop resonator to isolate the EPR signal detection system from the incident pulses. Keyword: Correlation spectroscopy,Multi-pulse EPR,Low power pulses,NMR,EPR...

  16. The regenerative medicine coalition. Interview with Frank-Roman Lauter.

    Science.gov (United States)

    Lauter, Frank-Roman

    2012-11-01

    Frank-Roman Lauter, Secretary General of the recently launched Regenerative Medicine Coalition, explains how the coalition was formed and what they hope to achieve. Frank-Roman Lauter has served as Secretary General of the Regenerative Medicine Coalition since 2012, and as Head of Business Development at Berlin-Brandenburg Center for Regenerative Therapies since 2007. Frank-Roman Lauter's interest is the organization of academic infrastructures to promote efficient translation of research findings into new therapies. He co-organizes joined strategy development for regenerative medicine clusters from seven European countries (FP7-EU Project) and has initiated cooperation between the California Institute for Regenerative Medicine and the German Federal Ministry for Education & Research, resulting in a joined funding program. Recently, he cofounded the international consortium of Regenerative Medicine translational centers (RMC; www.the-rmc.org ). Trained as a molecular biologist at the Max-Planck Institute in Berlin-Dahlem and at Stanford, he has 16 years of experience as an entrepreneur and life science manager in Germany and the USA.

  17. Recycling Frank: Spontaneous emergence of homochirality in noncatalytic systems

    Science.gov (United States)

    Plasson, Raphaël; Bersini, Hugues; Commeyras, Auguste

    2004-01-01

    In this work, we introduce a prebiotically relevant protometabolic pattern corresponding to an engine of deracemization by using an external energy source. The spontaneous formation of a nonracemic mixture of chiral compounds can be observed in out-of-equilibrium systems via a symmetry-breaking phenomenon. This observation is possible thanks to chirally selective autocatalytic reactions (Frank's model) [Frank, F. C. (1953) Biochim. Biophys. Acta 11, 459–463]. We show that the use of a Frank-like model in a recycled system composed of reversible chemical reactions, rather than the classical irreversible system, allows for the emergence of a synergetic autoinduction from simple reactions, without any autocatalytic or even catalytic reaction. This model is described as a theoretical framework, based on the stereoselective reactivity of preexisting chiral monomeric building blocks (polymerization, epimerization, and depolymerization) maintained out of equilibrium by a continuous energy income, via an activation reaction. It permits the self-conversion of all monomeric subunits into a single chiral configuration. Real prebiotic systems of amino acid derivatives can be described on this basis. They are shown to be able to spontaneously reach a stable nonracemic state in a few centuries. In such systems, the presence of epimerization reactions is no more destructive, but in contrast is the central driving force of the unstabilization of the racemic state. PMID:15548617

  18. Determination of temperature dependency of material parameters for lead-free alkali niobate piezoceramics by the inverse method

    Directory of Open Access Journals (Sweden)

    K. Ogo

    2016-06-01

    Full Text Available Sodium potassium niobate (NKN piezoceramics have been paid much attention as lead-free piezoelectric materials in high temperature devices because of their high Curie temperature. The temperature dependency of their material parameters, however, has not been determined in detail up to now. For this purpose, we exploit the so-called Inverse Method denoting a simulation-based characterization approach. Compared with other characterization methods, the Inverse Method requires only one sample shape of the piezoceramic material and has further decisive advantages. The identification of material parameters showed that NKN is mechanically softer in shear direction compared with lead zirconate titanate (PZT at room temperature. The temperature dependency of the material parameters of NKN was evaluated in the temperature range from 30 °C to 150 °C. As a result, we figured out that dielectric constants and piezoelectric constants show a monotonous and isotropic increment with increasing temperature. On the other hand, elastic stiffness constant c 44 E of NKN significantly decreased in contrast to other elastic stiffness constants. It could be revealed that the decrement of c 44 E is associated with an orthorhombic-tetragonal phase transition. Furthermore, ratio of elastic compliance constants s 44 E / s 33 E exhibited similar temperature dependent behavior to the ratio of piezoelectric constants d15/d33. It is suspected that mechanical softness in shear direction is one origin of the large piezoelectric shear mode of NKN. Our results show that NKN are suitable for high temperature devices, and that the Inverse Method should be a helpful approach to characterize material parameters under their practical operating conditions for NKN.

  19. Optimization of the scintillation parameters of the lead tungstate crystals for their application in high precision electromagnetic calorimetry

    International Nuclear Information System (INIS)

    Drobychev, G.

    2000-01-01

    In the frame of this dissertation work scintillation properties of the lead tungstate crystals PWO) and possibilities of their use were studied foreseeing their application for electromagnetic calorimetry in extreme radiation environment conditions of new colliders. The results of this work can be summarized in the following way. 1. A model of the scintillations origin in the lead tungstate crystals which includes processes influencing on the crystals radiation hardness and presence of slow components in scintillations was developed. 2. An analysis of the influences of the PWO scintillation properties changes on the parameters of the electromagnetic calorimeter was done. 3. Methods of the light collection from the large scintillation elements of complex shape made of the birefringent scintillation crystal with high refraction index and low light yield in case of signal registration by a photodetector with sensitive surface small in compare with the output face of scintillator were Studied. 4. Physical principles of the methodology of the scintillation crystals certification during their mass production foreseeing their installation into a calorimeter electromagnetic were developed. Correlations between the results of measurements of the PWO crystals parameters by different methods were found. (author)

  20. Phenozan Influence on the Physiological-Biochemical Parameters of the Young Minks Leading to Their Advanced Properties

    Directory of Open Access Journals (Sweden)

    Nikolai A. Balakirev

    2016-01-01

    Full Text Available The antioxidant influence on the physiological-biochemical parameters of productive animals is one of the most important directions in modern animal science. Phenozan is a synthetic antioxidant with high biological activities including those for animals. The positive effects of phenozan on the physiological-biochemical parameters of the mink blood were found. These effects are leading to the intensive growth, strong health, enhancement of the mink fur quality, and so forth. The total amount of the erythrocytes in the mink blood increased by about 4-5% due to phenozan inclusion in the mink diet. Even a more significant increase was found in hemoglobin content in the mink blood and erythrocytes (by about 9.5% and 8.8%, resp. due to phenozan inclusion of 100 mg/day, whereas it was found only by about 6.1–5.3% or 5.5–0.3%, owing to phenozan inclusion of 50 or 150 mg/day. For many other parameters the optimal phenozan concentration was about 100 mg/day per head according to the result obtained for all studied animal groups. Thus, phenozan can be successfully used as a biologically active compound for mink nutrition and is recommended for other farm animals.

  1. 75 FR 51429 - Definitions Contained in Title VII of Dodd-Frank Wall Street Reform and Consumer Protection Act

    Science.gov (United States)

    2010-08-20

    ... VII of Dodd-Frank Wall Street Reform and Consumer Protection Act AGENCY: Securities and Exchange... comments. SUMMARY: The Dodd-Frank Wall Street Reform and Consumer Protection Act (the ``Dodd-Frank Act... requirements. \\1\\ Dodd-Frank Wall Street Reform and Consumer Protection Act, Public Law No. 111-203, 124 Stat...

  2. Digital Documentation of Frank Lloyd Wright's Masterpiece, Fallingwater

    Science.gov (United States)

    Jerome, P.; Emilio, D.

    2017-08-01

    Since 1988, the professional staff of Architectural Preservation Studio (APS) has been involved with the conservation of Frank Lloyd Wright's Fallingwater in Mill Run, PA. Designed and erected from 1935 to 1939 as a weekend home for the Kauffman family, the complex consists of the main house and guest house. After five years of reports and prototype repairs, we produced a two-volume master plan. Using original Frank Lloyd Wright drawings from Avery Library as background drawings, we measured every surface and reproduced the drawings in CAD, also developing elevations of every room. Stone-by-stone drawings of every flagstone floor and terrace scheduled to be lifted were also created using overlapping film photography that was assembled into a photo mosaic. By 2005, we designed, administered and completed a four-phase exterior restoration, with the paint-stripping and repainting of interior rooms being performed during the brief winter period when the building is closed to the public on an ongoing basis. In 2016, we were invited back to the site to review conditions and advise on routine maintenance. At that time we proposed to re-document the buildings, this time using laser-scanning. Laser-scanning of the exterior was performed in May of 2016, and of the interior in March 2017, each over the course of four days. This paper will make a comparison between manual and digital techniques in terms of Fallingwater's documentation.

  3. Frank and Fearless: Supporting Academic Career Progression for Women in an Australian Program

    Directory of Open Access Journals (Sweden)

    Polly Parker

    2018-02-01

    Full Text Available The underrepresentation of women in senior positions continues to be a major challenge in higher education and most other industries. In Australia, the career trajectory for academic women stalls at a lower level than that of their male counterparts. Concern about this situation in one Australian university led to the design and delivery of a career progression program to support women’s advancement from senior lecturer to associate professor. This study details the main features of the program, designed to facilitate women’s transition from being leading academics to academic leaders through a focus on leadership and career progression. We report the participants’ perceptions of its value based on survey data. We conclude that leadership development is difficult work and requires a supportive environment where risk-taking is encouraged, where frank and fearless feedback is provided, and where the individual is required to examine assumptions and biases and to assume a leadership identity.

  4. Investigation Of The Effects Of Reflow Profile Parameters On Lead-free Solder Bump Volumes And Joint Integrity

    Science.gov (United States)

    Amalu, E. H.; Lui, Y. T.; Ekere, N. N.; Bhatti, R. S.; Takyi, G.

    2011-01-01

    The electronics manufacturing industry was quick to adopt and use the Surface Mount Technology (SMT) assembly technique on realization of its huge potentials in achieving smaller, lighter and low cost product implementations. Increasing global customer demand for miniaturized electronic products is a key driver in the design, development and wide application of high-density area array package format. Electronic components and their associated solder joints have reduced in size as the miniaturization trend in packaging continues to be challenged by printing through very small stencil apertures required for fine pitch flip-chip applications. At very narrow aperture sizes, solder paste rheology becomes crucial for consistent paste withdrawal. The deposition of consistent volume of solder from pad-to-pad is fundamental to minimizing surface mount assembly defects. This study investigates the relationship between volume of solder paste deposit (VSPD) and the volume of solder bump formed (VSBF) after reflow, and the effect of reflow profile parameters on lead-free solder bump formation and the associated solder joint integrity. The study uses a fractional factorial design (FFD) of 24-1 Ramp-Soak-Spike reflow profile, with all main effects and two-way interactions estimable to determine the optimal factorial combination. The results from the study show that the percentage change in the VSPD depends on the combination of the process parameters and reliability issues could become critical as the size of solder joints soldered on the same board assembly vary greatly. Mathematical models describe the relationships among VSPD, VSBF and theoretical volume of solder paste. Some factors have main effects across the volumes and a number of interactions exist among them. These results would be useful for R&D personnel in designing and implementing newer applications with finer-pitch interconnect.

  5. Theoretical Studies of the Spin Hamiltonian Parameters and Local Distortions for Cu2+ in Alkaline Earth Lead Zinc Phosphate Glasses

    Science.gov (United States)

    Wang, Bo-Kun; Wu, Shao-Yi; Yuan, Zi-Yi; Liu, Zi-Xuan; Jiang, Shi-Xin; Liu, Zheng; Yao, Zi-Jian; Teng, Bao-Hua; Wu, Ming-He

    2016-08-01

    The spin Hamiltonian parameters and local structures are theoretically studied for Cu2+-doped alkaline earth lead zinc phosphate (RPPZ, R=Mg, Ca, Sr, and Ba) glasses based on the high-order perturbation calculations for a tetragonally elongated octahedral 3d9 cluster. The relative elongation ratios are found to be ρ≈3.2%, 4.4%, 4.6%, and 3.3% for R=Mg, Ca, Sr, and Ba, respectively, because of the Jahn-Teller effect. The whole decreasing crystal-field strength Dq and orbital reduction factor k from Mg to Sr are ascribed to the weakening electrostatic coulombic interactions and the increasing probability of productivity of nonbridge oxygen (and hence increasing Cu2+-O2- electron cloud admixtures) under PbO addition, respectively, with increasing alkali earth ionic radius. The anomalies (the largest Dq and the next highest k among the systems) for R=Ba are attributed to the cross linkage of this large cation in the network. The overall increasing order (Mg≤Bacontaining copper dopants.

  6. 9 CFR 319.180 - Frankfurter, frank, furter, hotdog, weiner, vienna, bologna, garlic bologna, knockwurst, and...

    Science.gov (United States)

    2010-01-01

    ...) Frankfurter, frank, furter, hot-dog, wiener, vienna, bologna, garlic bologna, knockwurst and similar cooked... accordance with the provisions of § 381.118 of this chapter. (b) Frankfurter, frank, furter, hot-dog, wiener..., lips, weasands, and spleens; and partially defatted pork fatty tissue, or partially defatted beef fatty...

  7. Random walks, Brownian motion, and interacting particle systems: a festschrift in honor of Frank Spitzer

    National Research Council Canada - National Science Library

    Durrett, Richard; Kesten, Harry; Spitzer, Frank

    1991-01-01

    ..., made the transparency used in the printing process. STUDENTS OF FRANK SPITZERSTUDENTS OF FRANK SPITZER 1957 J. W. Lamperti, On the asymptotic behavior of recurrent and almostrecurrent events. 1964 W. W. Whitman, Some strong laws for random walks and Brownian motion. 1965 J. C. Mineka, The existence and uniqueness of positive solutions to the Wien...

  8. Anne Frank relaunched in the world of comics and graphic novels

    NARCIS (Netherlands)

    Ribbens, Kees

    2017-01-01

    Recently the Basel-based Anne Frank Fonds proudly presented the Graphic Diary of Anne Frank. The impression is created as if this is the first ever comic book version of Anne Frank’s narrative. This article shows that there were various predecessors.

  9. Application of Box-Behnken designs in parameters optimization of differential pulse anodic stripping voltammetry for lead(II) determination in two electrolytes.

    Science.gov (United States)

    Yu, Xiao-Lan; He, Yong

    2017-06-05

    Box-Behnken design was advantageous to parameters optimization of differential pulse anodic stripping voltammetry (DPASV) for the analysis of lead(II) with its high efficiency and accuracy. Five Box-Behnken designs were designed and conducted in the electrolyte of 0.1 mol/L acetate buffer and 0.1 mol/L HCl without the removal of oxygen. Significant parameters and interactions in each electrolyte were found (P-value Box-Behnken designs in parameters optimization of DPASV for lead(II) determination regardless of the electrolyte kinds.

  10. Interconnection of thermal parameters, microstructure and mechanical properties in directionally solidified Sn–Sb lead-free solder alloys

    Energy Technology Data Exchange (ETDEWEB)

    Dias, Marcelino; Costa, Thiago [Department of Manufacturing and Materials Engineering, University of Campinas — UNICAMP, 13083-860 Campinas, SP (Brazil); Rocha, Otávio [Federal Institute of Education, Science and Technology of Pará — IFPA, 66093-020 Belém, PA (Brazil); Spinelli, José E. [Department of Materials Engineering, Federal University of São Carlos — UFSCar, 13565-905 São Carlos, SP (Brazil); Cheung, Noé, E-mail: cheung@fem.unicamp.br [Department of Manufacturing and Materials Engineering, University of Campinas — UNICAMP, 13083-860 Campinas, SP (Brazil); Garcia, Amauri [Department of Manufacturing and Materials Engineering, University of Campinas — UNICAMP, 13083-860 Campinas, SP (Brazil)

    2015-08-15

    Considerable effort is being made to develop lead-free solders for assembling in environmental-conscious electronics, due to the inherent toxicity of Pb. The search for substitute alloys of Pb–Sn solders has increased in order to comply with different soldering purposes. The solder must not only meet the expected levels of electrical performance but may also have appropriate mechanical strength, with the absence of cracks in the solder joints. The Sn–Sb alloy system has a range of compositions that can be potentially included in the class of high temperature solders. This study aims to establish interrelations of solidification thermal parameters, microstructure and mechanical properties of Sn–Sb alloys (2 wt.%Sb and 5.5 wt.%Sb) samples, which were directionally solidified under cooling rates similar to those of reflow procedures in industrial practice. A complete high-cooling rate cellular growth is shown to be associated with the Sn–2.0 wt.%Sb alloy and a reverse dendrite-to-cell transition is observed for the Sn–5.5 wt.%Sb alloy. Strength and ductility of the Sn–2.0 wt.%Sb alloy are shown not to be affected by the cellular spacing. On the other hand, a considerable variation in these properties is associated with the cellular region of the Sn–5.5 wt.%Sb alloy casting. - Graphical abstract: Display Omitted - Highlights: • The microstructure of the Sn–2 wt.%Sb alloy is characterized by high-cooling rates cells. • Reverse dendrite > cell transition occurs for Sn–5.5 wt.%Sb alloy: cells prevail for cooling rates > 1.2 K/s. • Sn–5.5 wt.%Sb alloy: the dendritic region occurs for cooling rates < 0.9 K/s. • Sn–5.5 wt.%Sb alloy: tensile properties are improved with decreasing cellular spacing.

  11. Diagonal Earlobe Crease (Frank's Sign): A Predictor of Cerebral Vascular Events.

    Science.gov (United States)

    Nazzal, Saleh; Hijazi, Basem; Khalila, Luai; Blum, Arnon

    2017-11-01

    Frank's sign was first described in 1973 by an American physician (Sonders T. Frank). It is a diagonal crease in the earlobe that starts from the tragus to the edge of the auricle in an angle of 45° in varying depths. Frank's sign was described as a predictor of future coronary heart disease and peripheral vascular diseases. The aim of the study was to examine the association between Frank's sign and the development of ischemic stroke. This was a prospective study that enrolled consecutive patients admitted with an acute ischemic stroke. Frank's sign was tested in both ears. Clinical data included age, gender, type 2 diabetes mellitus, and hypertension. The study was approved by the institutional review board (the institutional ethics committee). A total of 241 consecutive patients who were hospitalized with an acute stroke and were eligible to take part in the study were recruited. Frank's sign was present in 190 patients (78.8%). Patients were divided according to clinical findings and the findings from brain computed tomography. There were 153 patients with transient ischemic attacks (63.6% of the patients) and 88 with cerebrovascular accidents (36.4% of the patients). A total of 112 patients with transient ischemic attacks had Frank's sign (73.2%), and 78 patients with cerebrovascular accidents had Frank's sign (88.6%), with a statistically significant difference (P <.01). Frank's sign could predict ischemic cerebrovascular events. Patients with classical cardiovascular risk factors had Frank's sign at a higher frequency. Copyright © 2017 Elsevier Inc. All rights reserved.

  12. 78 FR 1306 - Transition Period Under Section 716 of the Dodd-Frank Wall Street Reform and Consumer Protection Act

    Science.gov (United States)

    2013-01-08

    ... DEPARTMENT OF THE TREASURY Office of the Comptroller of the Currency [Docket ID OCC-2013-0001] Transition Period Under Section 716 of the Dodd-Frank Wall Street Reform and Consumer Protection Act AGENCY... Dodd-Frank Wall Street Reform and Consumer Protection Act (Dodd-Frank Act) prohibits providing Federal...

  13. Protective Effects of Vitamin C (Ascorbic Acid in Lead Acetate Exposed Diabetic Male Rats: Evaluation of Blood Biochemical Parameters and Testicular Histopathology

    Directory of Open Access Journals (Sweden)

    Alireza AYOUBI

    2015-01-01

    Full Text Available The aim of this study was to investigate the protective effects of vitamin C against lead toxicity by measuring the blood parameters and studying histopathology of testis in diabetic male rats. Wister rats (42 were randomly assigned into7 groups: I healthy; II fed lead acetate only; III vitamin C administered only; IV diabetic; V diabetic rats administered by vitamin C; VI diabetic rats given lead acetate and VII diabetic rats received lead acetate and vitamin C. The diabetic and lead groups had higher glucose, cholesterol, LDL, triglycerides and lower insulin and HDL concentration than the control group. It was found that vitamin C administration led to a lower level of blood glucose, cholesterol, LDL and triglycerides and higher HDL concentration in diabetic rats significantly. It was concluded that the antioxidant property of vitamin C resulted in reducing the oxidative stress complications of toxic levels of lead acetate in diabetic rats.

  14. The LHC: a miracle in the making by Frank Close

    CERN Multimedia

    2008-01-01

    After a quarter of a century of dreaming and planning, designing and building, at last we are about to see the LHC completed. Frank Close, Rudolf Peierls Centre for Theoretical Physics, Oxford University, is a former head of CERN’s Communication Group. He recently visted CERN to give lectures to the summer students.Already the excitement is gathering at the prospect of what will be discovered: possibly the Higgs Boson, or supersymmetry, or even things that no one has thought of. The world’s media are already abuzz with anticipation. But I feel that we are getting ahead of ourselves. The visions of the new world will hopefully be tomorrow’s stories; today let’s reflect on what has been achieved at even getting to this point and recall what it was like long ago when the dream began: in those bygone days, were you sure that the LHC would ever be? We all expect it will work, particle physics has a great track record in such thing...

  15. SUSTAINABLE ORIGINS IN ARCHITECTURE OF FRANK LLOYD WRIGHT

    Directory of Open Access Journals (Sweden)

    Martina Zbašnik-Senegačnik

    2012-10-01

    Full Text Available Frank Lloyd Wright is the greatest American architect and oneof the greatest architects the world. His career began at theend of the 19th century, during the great architectural boom inChicago, under the mentorship of Louis Henry Sullivan, fromwhom he adopted and then perfected the concepts of organicarchitecture and the Prairie house. During the Depressionyears, Wright developed a cheaper and simpler variant of thePrairie house: the Usonian house.Wright's architecture is characterised by an entirely newapproach to building design, particularly the design of houses.He reduced the number of rooms by combining their functionsin a large living space with a central fireplace. He used largeglazed areas to connect the external environment of the housewith the interior. The natural environment of the prairie wasthe inspiration for the horizontal lines that characterised hisarchitecture. His buildings are low in height, close to humanscale and with a great feeling for the natural setting in whichthey are built. He selected materials from the surroundingarea and the principal decoration of his architecture was thenatural structure of the material.The paper presents the ideas of organic architecture, thePrairie house, the Usonian house, along with the best examplesof Wright's architecture and the criteria he employed in theselection of materials and construction technologies. Theenvironmental aspect of his philosophy of the use of materialsis considered in the discussion section.Wright may be considered a pioneer of sustainable architecture.

  16. Frank Gilbreth and health care delivery method study driven learning.

    Science.gov (United States)

    Towill, Denis R

    2009-01-01

    The purpose of this article is to look at method study, as devised by the Gilbreths at the beginning of the twentieth century, which found early application in hospital quality assurance and surgical "best practice". It has since become a core activity in all modern methods, as applied to healthcare delivery improvement programmes. The article traces the origin of what is now currently and variously called "business process re-engineering", "business process improvement" and "lean healthcare" etc., by different management gurus back to the century-old pioneering work of Frank Gilbreth. The outcome is a consistent framework involving "width", "length" and "depth" dimensions within which healthcare delivery systems can be analysed, designed and successfully implemented to achieve better and more consistent performance. Healthcare method (saving time plus saving motion) study is best practised as co-joint action learning activity "owned" by all "players" involved in the re-engineering process. However, although process mapping is a key step forward, in itself it is no guarantee of effective re-engineering. It is not even the beginning of the end of the change challenge, although it should be the end of the beginning. What is needed is innovative exploitation of method study within a healthcare organisational learning culture accelerated via the Gilbreth Knowledge Flywheel. It is shown that effective healthcare delivery pipeline improvement is anchored into a team approach involving all "players" in the system especially physicians. A comprehensive process study, constructive dialogue, proper and highly professional re-engineering plus managed implementation are essential components. Experience suggests "learning" is thereby achieved via "natural groups" actively involved in healthcare processes. The article provides a proven method for exploiting Gilbreths' outputs and their many successors in enabling more productive evidence-based healthcare delivery as summarised

  17. Congenital glaucoma as an ophthalmic manifestation of Frank-Ter Haar syndrome.

    Science.gov (United States)

    Aktas, Zeynep; Karaca, Emine Esra; Dogan, Nurcan; Çakmak, Tugba; Unlu, Metin; Tok, Levent; Hasanreisoglu, Murat

    2014-04-01

    We report on a patient with Frank-Ter Haar syndrome that is associated with high intraocular pressures. A 21-day-old male patient was referred to our clinic for surgical treatment of congenital glaucoma. On ophthalmic examination, he had buphthalmos, mild corneal edema and high IOP readings in both eyes. The patient underwent uneventful trabeculotomy surgery, bilaterally. Marked bilateral anterior iris insertion was noted during the surgery. Childhood glaucoma may be associated with Frank-Ter Haar syndrome.

  18. Lack of Frank Agrammatism in the Nonfluent Agrammatic Variant of Primary Progressive Aphasia

    Directory of Open Access Journals (Sweden)

    Naida L. Graham

    2016-09-01

    Full Text Available Background/Aims: Frank agrammatism, defined as the omission and/or substitution of grammatical morphemes with associated grammatical errors, is variably reported in patients with nonfluent variant primary progressive aphasia (nfPPA. This study addressed whether frank agrammatism is typical in agrammatic nfPPA patients when this feature is not required for diagnosis. Method: We assessed grammatical production in 9 patients who satisfied current diagnostic criteria. Although the focus was agrammatism, motor speech skills were also evaluated to determine whether dysfluency arose primarily from apraxia of speech (AOS, instead of, or in addition to, agrammatism. Volumetric MRI analyses provided impartial imaging-supported diagnosis. Results: The majority of cases exhibited neither frank agrammatism nor AOS. Conclusion: There are nfPPA patients with imaging-supported diagnosis and preserved motor speech skills who do not exhibit frank agrammatism, and this may persist beyond the earliest stages of the illness. Because absence of frank agrammatism is a subsidiary diagnostic feature in the logopenic variant of PPA, this result has implications for differentiation of the nonfluent and logopenic variants, and indicates that PPA patients with nonfluent speech in the absence of frank agrammatism or AOS do not necessarily have the logopenic variant.

  19. Frank-ter Haar syndrome associated with sagittal craniosynostosis and raised intracranial pressure.

    Science.gov (United States)

    Bendon, Charlotte L; Fenwick, Aimée L; Hurst, Jane A; Nürnberg, Gudrun; Nürnberg, Peter; Wall, Steven A; Wilkie, Andrew O M; Johnson, David

    2012-11-09

    Frank-ter Haar syndrome is a rare disorder associated with skeletal, cardiac, ocular and craniofacial features including hypertelorism and brachycephaly. The most common underlying genetic defect in Frank-ter Haar syndrome appears to be a mutation in the SH3PXD2B gene on chromosome 5q35.1. Craniosynostosis, or premature fusion of the calvarial sutures, has not previously been described in Frank-ter Haar syndrome. We present a family of three affected siblings born to consanguineous parents with clinical features in keeping with a diagnosis of Frank-ter Haar syndrome. All three siblings have a novel mutation caused by the deletion of exon 13 of the SH3PXD2B gene. Two of the three siblings also have non-scaphocephalic sagittal synostosis associated with raised intracranial pressure. The clinical features of craniosynostosis and raised intracranial pressure in this family with a confirmed diagnosis of Frank-ter Haar syndrome expand the clinical spectrum of the disease. The abnormal cranial proportions in a mouse model of the disease suggests that the association is not coincidental. The possibility of craniosynostosis should be considered in individuals with a suspected diagnosis of Frank-ter Haar syndrome.

  20. Holy Terror, Batman! Frank Miller’s Dark Knight and the Superhero as Hardboiled Terrorist

    Directory of Open Access Journals (Sweden)

    Daniele Croci

    2016-05-01

    Full Text Available Conceived in the late thirties as “bold humanist response to Depression-era fears of runaway scientific advance and soulless industrialism” (Morrison 2012, 6, the superhero has flourished as one of the most resilient archetypes of American popular culture. This essay analyses the literary and cultural contaminations that have engendered an unprecedented revision of the paradigm since the 1980s. In particular, it will take into account three graphic novels by American cartoonist Frank Miller (1957 - , one of leading figures of the mainstream comics renaissance, whose ideas have indelibly influenced the artistic development of both medium and genre. The Dark Knight Returns (1986, The Dark Knight Strikes Again (2002 and Holy Terror (2011 constitute an ideal Batman trilogy that charts the character’s evolution as political counterpoint to the perceived crisis of American identity. In this regard, Reaganism and 9/11 are polarized as historical discontinuities triggering the need for a new kind of a criminal (superhero. It will be in fact demonstrated how the novels hybridise the latent generic links to hardboiled pulp novels (R. Chandler, D. Hammet with narrative and aesthetics elements appropriated from the culturally-received concepts of terrorism and terrorists. This fruitful contamination on the one hand “play[s] with reader assumptions about genre” (Baetens and Frey 2015, 46, while on the other hand deconstructs the ideological underpinnings of the archetype, as the moral dichotomy and the alienation of justice from the law.

  1. Kinetics Parameters of VVER-1000 Core with 3 MOX Lead Test Assemblies To Be Used for Accident Analysis Codes

    International Nuclear Information System (INIS)

    Pavlovitchev, A.M.

    2000-01-01

    The present work is a part of Joint U.S./Russian Project with Weapons-Grade Plutonium Disposition in VVER Reactor and presents the neutronics calculations of kinetics parameters of VVER-1000 core with 3 introduced MOX LTAs. MOX LTA design has been studied in [1] for two options of MOX LTA: 100% plutonium and of ''island'' type. As a result, zoning i.e. fissile plutonium enrichments in different plutonium zones, has been defined. VVER-1000 core with 3 introduced MOX LTAs of chosen design has been calculated in [2]. In present work, the neutronics data for transient analysis codes (RELAP [3]) has been obtained using the codes chain of RRC ''Kurchatov Institute'' [5] that is to be used for exploitation neutronics calculations of VVER. Nowadays the 3D assembly-by-assembly code BIPR-7A and 2D pin-by-pin code PERMAK-A, both with the neutronics constants prepared by the cell code TVS-M, are the base elements of this chain. It should be reminded that in [6] TVS-M was used only for the constants calculations of MOX FAs. In current calculations the code TVS-M has been used both for UOX and MOX fuel constants. Besides, the volume of presented information has been increased and additional explications have been included. The results for the reference uranium core [4] are presented in Chapter 2. The results for the core with 3 MOX LTAs are presented in Chapter 3. The conservatism that is connected with neutronics parameters and that must be taken into account during transient analysis calculations, is discussed in Chapter 4. The conservative parameters values are considered to be used in 1-point core kinetics models of accident analysis codes

  2. Parameters influencing the deposition of methylammonium lead halide iodide in hole conductor free perovskite-based solar cells

    Science.gov (United States)

    Cohen, Bat-El; Gamliel, Shany; Etgar, Lioz

    2014-08-01

    Perovskite is a promising light harvester for use in photovoltaic solar cells. In recent years, the power conversion efficiency of perovskite solar cells has been dramatically increased, making them a competitive source of renewable energy. An important parameter when designing high efficiency perovskite-based solar cells is the perovskite deposition, which must be performed to create complete coverage and optimal film thickness. This paper describes an in-depth study on two-step deposition, separating the perovskite deposition into two precursors. The effects of spin velocity, annealing temperature, dipping time, and methylammonium iodide concentration on the photovoltaic performance are studied. Observations include that current density is affected by changing the spin velocity, while the fill factor changes mainly due to the dipping time and methylammonium iodide concentration. Interestingly, the open circuit voltage is almost unaffected by these parameters. Hole conductor free perovskite solar cells are used in this work, in order to minimize other possible effects. This study provides better understanding and control over the perovskite deposition through highly efficient, low-cost perovskite-based solar cells.

  3. Parameters influencing the deposition of methylammonium lead halide iodide in hole conductor free perovskite-based solar cells

    International Nuclear Information System (INIS)

    Cohen, Bat-El; Gamliel, Shany; Etgar, Lioz

    2014-01-01

    Perovskite is a promising light harvester for use in photovoltaic solar cells. In recent years, the power conversion efficiency of perovskite solar cells has been dramatically increased, making them a competitive source of renewable energy. An important parameter when designing high efficiency perovskite-based solar cells is the perovskite deposition, which must be performed to create complete coverage and optimal film thickness. This paper describes an in-depth study on two-step deposition, separating the perovskite deposition into two precursors. The effects of spin velocity, annealing temperature, dipping time, and methylammonium iodide concentration on the photovoltaic performance are studied. Observations include that current density is affected by changing the spin velocity, while the fill factor changes mainly due to the dipping time and methylammonium iodide concentration. Interestingly, the open circuit voltage is almost unaffected by these parameters. Hole conductor free perovskite solar cells are used in this work, in order to minimize other possible effects. This study provides better understanding and control over the perovskite deposition through highly efficient, low-cost perovskite-based solar cells

  4. The relationship between selected VDR, HFE and ALAD gene polymorphisms and several basic toxicological parameters among persons occupationally exposed to lead.

    Science.gov (United States)

    Szymańska-Chabowska, Anna; Łaczmański, Łukasz; Jędrychowska, Iwona; Chabowski, Mariusz; Gać, Paweł; Janus, Agnieszka; Gosławska, Katarzyna; Smyk, Beata; Solska, Urszula; Mazur, Grzegorz; Poręba, Rafał

    2015-08-06

    The aim of this study was to find a relationship between polymorphisms of ALAD rs1805313, rs222808, rs1139488, VDR FokI and HFE C282Y and H63D and basic toxicological parameters (lead and ZnPP blood concentration) in people occupationally exposed to lead. We collected data of 101 workers (age 25-63 years) directly exposed to lead. The toxicological lab tests included blood lead, cadmium and ZnPP concentration measurement and arsenic urine concentration measurement. Workers were genotyped for ALAD (rs1805313, rs222808, rs1139488), HFE (C282Y, H63D) and VDR (FokI). Individuals with the lead exposure and coexisting F allel in the locus Fok-I of VDR gene are suspected of higher zinc protoporphyrins concentrations. Workers exposed to the lead with the Y allel in the locus C282Y of the HFE gene are predisposed to lower ZnPP levels and individuals with coexisting H allel in the locus H63D HFE gene are predisposed to lower Pb-B levels. The T allel in the locus rs1805313 of the ALAD gene determines lower Pb-B and ZnPP levels in lead-exposed individuals. The heterozigosity of the locus rs2228083 of the ALAD gene has a strong predilection to higher Pb-B levels. The carriage of the C allel in the locus rs1139488 of the ALAD gene might determine higher Pb-B levels and the heterozigosity of the locus rs1139488 of the ALAD gene might result in higher ZnPP levels. The study revealed relationship between VDR, HFE and ALAD genes polymorphism and basic toxicological parameters in occupationally exposed workers. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  5. Interplanetary Parameters Leading to Relativistic Electron Enhancement and Persistent Depletion Events at Geosynchronous Orbit and Potential for Prediction

    Science.gov (United States)

    Pinto, Victor A.; Kim, Hee-Jeong; Lyons, Larry R.; Bortnik, Jacob

    2018-02-01

    We have identified 61 relativistic electron enhancement events and 21 relativistic electron persistent depletion events during 1996 to 2006 from the Geostationary Operational Environmental Satellite (GOES) 8 and 10 using data from the Energetic Particle Sensor (EPS) >2 MeV fluxes. We then performed a superposed epoch time analysis of the events to find the characteristic solar wind parameters that determine the occurrence of such events, using the OMNI database. We found that there are clear differences between the enhancement events and the persistent depletion events, and we used these to establish a set of threshold values in solar wind speed, proton density and interplanetary magnetic field (IMF) Bz that can potentially be useful to predict sudden increases in flux. Persistent depletion events are characterized by a low solar wind speed, a sudden increase in proton density that remains elevated for a few days, and a northward turning of IMF Bz shortly after the depletion starts. We have also found that all relativistic electron enhancement or persistent depletion events occur when some geomagnetic disturbance is present, either a coronal mass ejection or a corotational interaction region; however, the storm index, SYM-H, does not show a strong connection with relativistic electron enhancement events or persistent depletion events. We have tested a simple threshold method for predictability of relativistic electron enhancement events using data from GOES 11 for the years 2007-2010 and found that around 90% of large increases in electron fluxes can be identified with this method.

  6. Quality inspection of anisotropic scintillating lead tungstate (PbWO 4) crystals through measurement of interferometric fringe pattern parameters

    Science.gov (United States)

    Cocozzella, N.; Lebeau, M.; Majni, G.; Paone, N.; Rinaldi, D.

    2001-08-01

    Scintillating crystals are widely used as detectors in radiographic systems, computerized axial tomography devices and in calorimeters employed in high-energy physics. This paper results from a project motivated by the development of the CMS calorimeter at CERN, which will make use of a large number of scintillating crystals. In order to prevent crystals from breaking because of internal residual stress, a quality control system based on optic inspection of interference fringe patterns was developed. The principle of measurement procedures was theoretically modelled, and then a dedicated polariscope was designed and built, in order to observe the crystals under induced stresses or to evaluate the residual internal stresses. The results are innovative and open a new perspective for scintillating crystals quality control: the photoelastic constant normal to the optic axis of the lead tungstate crystals (PbWO 4) was measured, and the inspection procedure developed is applicable to mass production, not only to optimize the crystal processing, but also to establish a quality inspection procedure.

  7. Quality inspection of anisotropic scintillating lead tungstate (PbWO4) crystals through measurement of interferometric fringe pattern parameters

    International Nuclear Information System (INIS)

    Cocozzella, N.; Lebeau, M.; Majni, G.; Paone, N.; Rinaldi, D.

    2001-01-01

    Scintillating crystals are widely used as detectors in radiographic systems, computerized axial tomography devices and in calorimeters employed in high-energy physics. This paper results from a project motivated by the development of the CMS calorimeter at CERN, which will make use of a large number of scintillating crystals. In order to prevent crystals from breaking because of internal residual stress, a quality control system based on optic inspection of interference fringe patterns was developed. The principle of measurement procedures was theoretically modelled, and then a dedicated polariscope was designed and built, in order to observe the crystals under induced stresses or to evaluate the residual internal stresses. The results are innovative and open a new perspective for scintillating crystals quality control: the photoelastic constant normal to the optic axis of the lead tungstate crystals (PbWO 4 ) was measured, and the inspection procedure developed is applicable to mass production, not only to optimize the crystal processing, but also to establish a quality inspection procedure

  8. Toxic effects on bioaccumulation and hematological parameters of juvenile rockfish Sebastes schlegelii exposed to dietary lead (Pb) and ascorbic acid.

    Science.gov (United States)

    Kim, Jun-Hwan; Kang, Ju-Chan

    2017-06-01

    Juvenile rockfish, Sebastes schlegelii (mean length 11.3 ± 1.2 cm, and mean weight 32.5 ± 4.1 g) were exposed for four weeks to dietary lead (Pb 2+ ) at 0, 120, and 240 mg/L and ascorbic acid (AsA) at 100, 200, and 400 mg/L. The exposure concentrations and duration of significant Pb-induced accumulations in specific tissues of S. schlegelii were assessed. High levels of ascorbic acid significantly attenuated accumulations following exposure to dietary Pb. Dietary Pb exposure caused a significant increase in blood Pb concentrations, whereas red blood cell (RBC) count, hematocrit, and hemoglobin were significantly decreased. Notable changes were also observed in plasma calcium, magnesium, glucose, cholesterol, glutamic oxaloacetic transaminase (GOT), and glutamic pyruvate transaminase (GPT). The growth performance of S. schlegelii was significantly decreased. High doses AsA supplemention were effective in attenuating the changes brought about by dietary Pb exposure. Copyright © 2017 Elsevier Ltd. All rights reserved.

  9. The relationship between selected VDR, HFE and ALAD gene polymorphisms and several basic toxicological parameters among persons occupationally exposed to lead

    International Nuclear Information System (INIS)

    Szymańska-Chabowska, Anna; Łaczmański, Łukasz; Jędrychowska, Iwona; Chabowski, Mariusz; Gać, Paweł; Janus, Agnieszka; Gosławska, Katarzyna; Smyk, Beata; Solska, Urszula; Mazur, Grzegorz; Poręba, Rafał

    2015-01-01

    The aim of this study was to find a relationship between polymorphisms of ALAD rs1805313, rs222808, rs1139488, VDR FokI and HFE C282Y and H63D and basic toxicological parameters (lead and ZnPP blood concentration) in people occupationally exposed to lead. We collected data of 101 workers (age 25–63 years) directly exposed to lead. The toxicological lab tests included blood lead, cadmium and ZnPP concentration measurement and arsenic urine concentration measurement. Workers were genotyped for ALAD (rs1805313, rs222808, rs1139488), HFE (C282Y, H63D) and VDR (FokI). Individuals with the lead exposure and coexisting F allel in the locus Fok-I of VDR gene are suspected of higher zinc protoporphyrins concentrations. Workers exposed to the lead with the Y allel in the locus C282Y of the HFE gene are predisposed to lower ZnPP levels and individuals with coexisting H allel in the locus H63D HFE gene are predisposed to lower Pb-B levels. The T allel in the locus rs1805313 of the ALAD gene determines lower Pb-B and ZnPP levels in lead–exposed individuals. The heterozigosity of the locus rs2228083 of the ALAD gene has a strong predilection to higher Pb-B levels. The carriage of the C allel in the locus rs1139488 of the ALAD gene might determine higher Pb-B levels and the heterozigosity of the locus rs1139488 of the ALAD gene might result in higher ZnPP levels. Conclusion. The study revealed relationship between VDR, HFE and ALAD genes polymorphism and basic toxicological parameters in occupationally exposed workers

  10. Mortimer Frank, Johann Ludwig Choulant, and the history of anatomical illustration.

    Science.gov (United States)

    Feibel, Robert M

    2018-01-01

    Mortimer Frank (1874-1919) was an ophthalmologist in Chicago, Illinois. He published a number of papers on the history of medicine, and was secretary of the Chicago Society of the History of Medicine and editor of their Bulletin. His major contribution to the history of medicine relates to the history of anatomical illustration. The classic book on that subject had been published in 1852 in German by the physician and historian, Johann Ludwig Choulant (1791-1861). However, by Frank's time this text was both out dated and out of print. Frank took on the tremendous project of translating Choulant's German text into English as History and Bibliography of Anatomic Illustration in Its Relation to Anatomic Science and The Graphic Arts. He improved Choulant's text with the results of his and other scholars' research, greatly enlarging the text. Frank supplemented the original book with a biography of Choulant, essays on anatomists not considered in the original text, and an essay on the history of anatomical illustration prior to those authors discussed by Choulant. This book, now referred to as Choulant/Frank, has been reprinted several times, and is still useful as a reference in this field, though some of its research is now dated.

  11. Blood parameters as biomarkers of cadmium and lead exposure and effects in wild wood mice (Apodemus sylvaticus) living along a pollution gradient.

    Science.gov (United States)

    Tête, Nicolas; Afonso, Eve; Bouguerra, Ghada; Scheifler, Renaud

    2015-11-01

    Small mammal populations living on contaminated sites are exposed to various chemicals. Lead (Pb) and cadmium (Cd), two well-known nonessential trace metals, accumulate in different organs and are known to cause multiple adverse effects. To develop nonlethal markers in ecotoxicology, the present work aimed to study the relationships between blood parameters (hematocrit, leukocyte levels and granulated erythrocyte levels) and Cd and Pb concentrations in the soil and in the liver and kidneys of wood mice (Apodemus sylvaticus). Individuals were trapped along a pollution gradient with high levels of Cd, Pb and zinc (Zn) contamination. The results indicated that hematological parameters were independent of individual characteristics (age and gender). Blood parameters varied along the pollution gradient, following a pattern similar to the accumulation of Cd in the organs of the wood mice. No relationship was found between the blood parameters studied and Pb concentrations in the organs or in the environment. The hematocrit and leukocyte number decreased with increasing concentrations of Cd in the kidneys and/or in the liver. Moreover, the hematocrit was lower in the animals that were above the thresholds (LOAELs) for Cd concentrations in the liver. These responses were interpreted as a warning of potential negative effects of Cd exposure on the oxygen transport capacity of the blood (e.g., anemia). The present results suggest that blood parameters, notably hematocrit, may offer a minimally invasive biomarker for the evaluation of Cd exposure in further ecotoxicological studies. Copyright © 2014 Elsevier Ltd. All rights reserved.

  12. Interpretation of recovery Stage III in gold: a comment on the paper of A. Seeger and W. Frank

    Energy Technology Data Exchange (ETDEWEB)

    Sonnenberg, K.; Dedek, U.; Ehrhart, P.; Schilling, W. (Kernforschungsanlage Juelich G.m.b.H. (Germany, F.R.). Inst. fuer Festkoerperforschung)

    1983-09-01

    The attempt of Seeger and Frank to reinterpret the annealing in recovery Stage III in gold in terms of the mobile single interstitial is discussed. Considering the experimental data of Stage III in irradiated samples and for the annealing stage observed in quenching samples around room temperature, it is concluded that the assignment of the recovery in these two stages to two different elementary defects is unjustified. It is further demonstrated that the interpretation of recovery Stage III by interstitial migration is in conflict with the direct observations of vacancies migrating in this stage and that the interpretation of the recovery measurements in radiation doped gold by the two interstitial model leads to inconsistencies. The attempt to interpret recovery Stage III in gold by interstitial migration must therefore be rejected and the activation energy of 0.71 eV measured for this stage must be attributed to the migration energy of single vacancies.

  13. Frank Close presents his book "Neutrino" and a forthcoming book on Bruno Pontecorvo

    CERN Multimedia

    2013-01-01

    Frank Close's book "Neutrino" is short listed for the Italian Galileo Prize. Frank describes how he was inspired to write about Ray Davis' heroic quest to do what many thought was impossible: detecting neutrinos from the sun. He will also describe how he has, in turn, become fascinated by the life and work of "Mr Neutrino" - Bruno Pontecorvo - and is writing a biography of him.   By choosing to move to the USSR suddenly in 1950, Pontecorvo missed out on getting full credit for several seminal ideas about neutrinos including, possibly, their discovery. Why he went to the USSR so suddenly has been unresolved for 60 years. Frank's book "A Life of Two Halves" may answer this question, in 2014. He will update on progress so far. Wednesday 17 April at 4 p.m. in the Library, 52-1-052 Tea and coffee will be served from 3:30 p.m. Here on Indico.

  14. For an aesthetics of communication: Interview with Frank Hartmann Por uma estética da comunicação: entrevista com Frank Hartmann

    Directory of Open Access Journals (Sweden)

    Lucia Leao

    2011-07-01

    Full Text Available In August 18, 2010, Frank Hartmann was present at the Post Graduate Program in Communication and Semiotics of PUC-SP, where he lectured on the following theme: “Towards an aesthetics of communication”. Frank Hartmann is full professor at the Bauhaus University, Weimar in Germany and external faculty member at the Dept. of Communication, University of Vienna, Austria. He is the author, among others, of: Medien und Kommunikation (2008; Mediologie - Ansatz einer der Medientheorie Kulturwissenschaften (2003, and Medienphilosophie (2000. More information on his website: http://www.medienphilosophie.net/f_hartmann.htmlFrank Hartmann esteve no dia 18 de agosto de 2010 no Programa de Pós-Graduação em Comunicação e Semiótica da PUC-SP, onde proferiu a palestra “Towards an aesthetics of communication”. Hartmann é professor titular da Universidade Bauhaus, em Weimar, na Alemanha e professor convidado do Departamento de Comunicação da Universidade de Viena, na Áustria. É autor, entre outros, de: Medien und Kommunikation (2008; Mediologie – Ansätze einer Medientheorie der Kulturwissenschaften (2003; e Medienphilosophie (2000. Mais informações em seu site: http://www.medienphilosophie.net/f_hartmann.html

  15. Minimally invasive estimation of ventricular dead space volume through use of Frank-Starling curves.

    Directory of Open Access Journals (Sweden)

    Shaun Davidson

    Full Text Available This paper develops a means of more easily and less invasively estimating ventricular dead space volume (Vd, an important, but difficult to measure physiological parameter. Vd represents a subject and condition dependent portion of measured ventricular volume that is not actively participating in ventricular function. It is employed in models based on the time varying elastance concept, which see widespread use in haemodynamic studies, and may have direct diagnostic use. The proposed method involves linear extrapolation of a Frank-Starling curve (stroke volume vs end-diastolic volume and its end-systolic equivalent (stroke volume vs end-systolic volume, developed across normal clinical procedures such as recruitment manoeuvres, to their point of intersection with the y-axis (where stroke volume is 0 to determine Vd. To demonstrate the broad applicability of the method, it was validated across a cohort of six sedated and anaesthetised male Pietrain pigs, encompassing a variety of cardiac states from healthy baseline behaviour to circulatory failure due to septic shock induced by endotoxin infusion. Linear extrapolation of the curves was supported by strong linear correlation coefficients of R = 0.78 and R = 0.80 average for pre- and post- endotoxin infusion respectively, as well as good agreement between the two linearly extrapolated y-intercepts (Vd for each subject (no more than 7.8% variation. Method validity was further supported by the physiologically reasonable Vd values produced, equivalent to 44.3-53.1% and 49.3-82.6% of baseline end-systolic volume before and after endotoxin infusion respectively. This method has the potential to allow Vd to be estimated without a particularly demanding, specialised protocol in an experimental environment. Further, due to the common use of both mechanical ventilation and recruitment manoeuvres in intensive care, this method, subject to the availability of multi-beat echocardiography, has the potential to

  16. La arquitectura tardía de Frank Lloyd Wright, el primer maestro moderno

    OpenAIRE

    González Capitel, Antón

    1996-01-01

    1. La arquitectura tardía de Frank Lloyd Wright, el primer maestro moderno l. l. Un Wright renovado. Talleres y residencias l. l. l. Nuevas casas de Wright en su segunda «edad de oro»: un neoplasticismo orgánico en la casa de la Cascada l. l. 2. Geometrías y disposiciones alternativas l. 2. Arquitectura y ciudad orgánicas 1. 2. 1. El desarrollo de la arquitectura orgánica 1. 3. Arquitecturas relacionadas con la de Frank Lloyd Wright entre los emigrados europeos: Schindler y...

  17. Effect of Different HTM Layers and Electrical Parameters on ZnO Nanorod-Based Lead-Free Perovskite Solar Cell for High-Efficiency Performance

    Directory of Open Access Journals (Sweden)

    Farhana Anwar

    2017-01-01

    Full Text Available Simulation has been done using SCAPS-1D to examine the efficiency of CH3NH3SnI3-based solar cells including various HTM layers such as spiro-OMeTAD, Cu2O, and CuSCN. ZnO nanorod array has been considered as an ETM layer. Device parameters such as thickness of the CH3NH3SnI3 layer, defect density of interfaces, density of states, and metal work function were studied. For optimum parameters of all three structures, efficiency of 20.21%, 20.23%, and 18.34% has been achieved for spiro-OMeTAD, Cu2O, and CuSCN, respectively. From the simulations, an alternative lead-free perovskite solar cell is introduced with the CH3NH3SnI3 absorber layer, ZnO nanorod ETM layer, and Cu2O HTM layer.

  18. 76 FR 11935 - Death of Army Corporal Frank W. Buckles, the Last Surviving American Veteran of World War I

    Science.gov (United States)

    2011-03-03

    ... of Army Corporal Frank W. Buckles, the Last Surviving American Veteran of World War I By the... Corporal Frank W. Buckles, the last surviving American veteran of World War I, and in remembrance of the generation of American veterans of World War I, I hereby order, by the authority vested in me by the...

  19. 75 FR 62718 - Disclosure for Asset-Backed Securities Required by Section 943 of the Dodd-Frank Wall Street...

    Science.gov (United States)

    2010-10-13

    ... Putting Banks in Hole,'' Wall Street Journal (Mar. 8, 2010) (noting that most mortgages put back to... Dodd-Frank Wall Street Reform and Consumer Protection Act AGENCY: Securities and Exchange Commission. ACTION: Proposed rule. SUMMARY: Pursuant to Section 943 of the Dodd-Frank Wall Street Reform and Consumer...

  20. 78 FR 47217 - Proposed Supervisory Guidance on Implementing Dodd-Frank Act Company-Run Stress Tests for Banking...

    Science.gov (United States)

    2013-08-05

    ... 10-50. More advanced portfolio segmentation can take several forms, such as by product (construction... CORPORATION 12 CFR Part 325 Proposed Supervisory Guidance on Implementing Dodd-Frank Act Company-Run Stress... 165(i)(2) of the Dodd-Frank Act Wall Street Reform and Consumer Protection Act (``DFA'') stress tests...

  1. 78 FR 45288 - Frank Sherman, Evergreen Trails, Inc., Cabana Coaches, LLC, TMS West Coast, Inc. and FSCS...

    Science.gov (United States)

    2013-07-26

    ... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [STB Docket No. MCF 21054] Frank Sherman, Evergreen Trails, Inc., Cabana Coaches, LLC, TMS West Coast, Inc. and FSCS Corporation--Intra-Corporate Family Transaction Exemption Frank Sherman, Evergreen Trails, Inc. (Evergreen), Cabana Coaches, LLC...

  2. A new RF tagging pulse based on the Frank poly-phase perfect sequence

    DEFF Research Database (Denmark)

    Laustsen, Christoffer; Greferath, Marcus; Ringgaard, Steffen

    2014-01-01

    Radio frequency (RF) spectrally selective multiband pulses or tagging pulses, are applicable in a broad range of magnetic resonance methods. We demonstrate through simulations and experiments a new phase-modulation-only RF pulse for RF tagging based on the Frank poly-phase perfect sequence...

  3. Sirkusbaas Frank Fillis (1857-1921): die Barnum van Suid-Afrika ...

    African Journals Online (AJOL)

    He was born in London in 1857 and died in Bangkok in 1921. He came to South Africa in 1880 and for ... This article deals with a number of new facts, as well as aspects such as his popularity, talent as entertainer, his kindness, poor business sense and the social impact of his circus. Frank Fillis: Die Barnum van Suid-Afrika

  4. 76 FR 43549 - Office of Thrift Supervision Integration; Dodd-Frank Act Implementation

    Science.gov (United States)

    2011-07-21

    ..., Manager, Disclosure Services and Administrative Operations, Communications Division, (202) 874-5378... abolishes the OTS ninety days after the transfer date. Specifically, the Dodd-Frank Act transfers to the OCC... operation of law.\\3\\ Title III also transfers OTS employees to either the OCC or FDIC, allocated as...

  5. Religious Foundations of Culture (The Controversy Between Simon Frank and Simon Lurie on “Vekhi”

    Directory of Open Access Journals (Sweden)

    Gennadii Aliaiev

    2016-02-01

    Full Text Available The author analyses discussion that took place between S. Frank and S. Lurje concerning “Vekhi” (“Landmarks”. In this context, the author’s objective is to show the evolution of S. Frank’s outlook on culture and religion, which developed in three stages: the humanistic individualism, the religious humanism, and the Christian realism.

  6. Frank Lloyd Wright - väike maja saab suureks : meistriklass / Pille Nagel

    Index Scriptorium Estoniae

    Nagel, Pille

    2006-01-01

    Frank Lloyd Wrighti (1867-1959) eramuloomingust. Preeriamajadest, usonia majadest, krundist ja maastikust algavast arhitektuurist, katustest ja horisontaalsusest, plaanist, tasapindade ja kõrguste muutumistest, akendest, autovarjualustest, materjalidest ja värvidest, privaatsusest ja avatusest, inimlikust mõõtmest jm. 11 värv. vaadet, plaan

  7. The Nation behind the Diary: Anne Frank and the Holocaust of the Dutch Jews

    Science.gov (United States)

    Foray, Jennifer L.

    2011-01-01

    Since its first appearance in 1947, "The Diary of Anne Frank" has been translated into sixty-five different languages, including Welsh, Esperanto, and Faroese. Millions and perhaps even billions of readers, scattered throughout the globe and now spanning multiple generations, are familiar with the life and work of this young Jewish…

  8. Understanding and Teaching Students with Emotional-Behavioral Disorders: A Conversation with Frank H. Wood

    Science.gov (United States)

    Zabel, Robert; Kaff, Marilyn; Teagarden, Jim

    2011-01-01

    Frank H. Wood is both a pioneer and a first-generation leader, and his contributions continue to influence the field today. Dr. Wood participated in several "firsts." In the 1950s, he taught the first public school class in Minnesota for emotionally disturbed students, and he later served as the first coordinator of programs for students…

  9. After $74-Million and Counting, Frank Gehry's Library Opens at Princeton

    Science.gov (United States)

    Carlson, Scott

    2008-01-01

    In putting up its new, Frank Gehry-designed Lewis Library, Princeton University endured its share of challenges. It constructed models of the building to give the subcontractors a chance to practice. It fired a contractor halfway through the job when the building was past due. It learned that some subcontractors were trying to bribe their way onto…

  10. Looking and Learning: The Solomon R. Guggenheim Museum, Frank Lloyd Wright

    Science.gov (United States)

    Vatsky, Sharon

    2007-01-01

    Frank Lloyd Wright was born and raised on the farmlands of Wisconsin. His mother had a vision that her son would become a great architect. Wright was raised with strong guiding principles, a love of nature, a belief in the unity of all things, and a respect for discipline and hard work. He created the philosophy of "organic architecture," which…

  11. Optimization of chemical and instrumental parameters in hydride generation laser-induced breakdown spectrometry for the determination of arsenic, antimony, lead and germanium in aqueous samples.

    Science.gov (United States)

    Yeşiller, Semira Unal; Yalçın, Serife

    2013-04-03

    A laser induced breakdown spectrometry hyphenated with on-line continuous flow hydride generation sample introduction system, HG-LIBS, has been used for the determination of arsenic, antimony, lead and germanium in aqueous environments. Optimum chemical and instrumental parameters governing chemical hydride generation, laser plasma formation and detection were investigated for each element under argon and nitrogen atmosphere. Arsenic, antimony and germanium have presented strong enhancement in signal strength under argon atmosphere while lead has shown no sensitivity to ambient gas type. Detection limits of 1.1 mg L(-1), 1.0 mg L(-1), 1.3 mg L(-1) and 0.2 mg L(-1) were obtained for As, Sb, Pb and Ge, respectively. Up to 77 times enhancement in detection limit of Pb were obtained, compared to the result obtained from the direct analysis of liquids by LIBS. Applicability of the technique to real water samples was tested through spiking experiments and recoveries higher than 80% were obtained. Results demonstrate that, HG-LIBS approach is suitable for quantitative analysis of toxic elements and sufficiently fast for real time continuous monitoring in aqueous environments. Copyright © 2013 Elsevier B.V. All rights reserved.

  12. Cadmium, lead and mercury concentrations and their influence on morphological parameters in blood donors from different age groups from southern Poland.

    Science.gov (United States)

    Janicka, Monika; Binkowski, Łukasz J; Błaszczyk, Martyna; Paluch, Joanna; Wojtaś, Włodzimierz; Massanyi, Peter; Stawarz, Robert

    2015-01-01

    Due to industrial development, environmental contamination with metals increases which leads to higher human exposure via air, water and food. In order to evaluate the level of the present exposition, the concentrations of metals can be measured in such biological materials as human blood. In this study, we assessed the concentrations of cadmium (Cd), mercury (Hg) and lead (Pb) in blood samples from male blood donors from southern Poland (Europe) born in 1994 (n=30) and between 1947 and 1955 (n=30). Higher levels of Pb were seen in the group of older men (4.48 vs 2.48μg/L), whereas the Hg levels were lower (1.78 vs 4.28μg/L). Cd concentrations did not differ between age groups (0.56μg/L). The levels of Cd and Pb in older donors were significantly correlated (Spearman R 0.5135). We also observed a positive correlation between the number of red blood cells (RBC) and Hg concentrations in the older group (Spearman R 0.4271). Additionally, we noted numerous correlations among morphological parameters. Based on our results, we can state that metals influence the blood morphology and their concentrations in blood vary among age groups. Copyright © 2014 Elsevier GmbH. All rights reserved.

  13. Numerical analysis of stress effects on Frank loop evolution during irradiation in austenitic Fe-Cr-Ni alloy

    International Nuclear Information System (INIS)

    Tanigawa, H.; Katoh, Y.; Kohyama, A.

    1995-01-01

    Effects of applied stress on early stages of interstitial type Frank loop evolution were investigated by both numerical calculation and irradiation experiments. The final objective of this research is to propose a comprehensive model of complex stress effects on microstructural evolution under various conditions. In the experimental part of this work, the microstructural analysis revealed that the differences in resolved normal stress caused those in the nucleation rates of Frank loops on {111} crystallographic family planes, and that with increasing external applied stress the total nucleation rate of Frank loops was increased. A numerical calculation was carried out primarily to evaluate the validity of models of stress effects on nucleation processes of Frank loop evolution. The calculation stands on rate equations which describe evolution of point defects, small points defect clusters and Frank loops. The rate equations of Frank loop evolution were formulated for {111} planes, considering effects of resolved normal stress to clustering processes of small point defects and growth processes of Frank loops, separately. The experimental results and the predictions from the numerical calculation qualitatively coincided well with each other. (orig.)

  14. Effect of thermal stress on Frank-Starling relations in humans

    DEFF Research Database (Denmark)

    Wilson, T.E.; Brothers, R.M.; Tollund, C.

    2009-01-01

    The Frank-Starling 'law of the heart' is implicated in certain types of orthostatic intolerance in humans. Environmental conditions have the capacity to modulate orthostatic tolerance, where heat stress decreases and cooling increases orthostatic tolerance. The objective of this project was to test...... the hypothesis that heat stress augments and cooling attenuates orthostatic-induced decreases in stroke volume (SV) via altering the operating position on a Frank-Starling curve. Pulmonary artery catheters were placed in 11 subjects for measures of pulmonary capillary wedge pressure (PCWP) and SV (thermodilution...... derived cardiac output/heart rate). Subjects experienced lower-body negative-pressure (LBNP) of 0, 15 and 30 mmHg during normothermia, skin-surface cooling (decrease in mean skin temperature of 4.3 +/- 0.4 degrees C (mean +/- s.e.m.) via perfusing 16 degrees C water through a tubed-lined suit), and whole...

  15. Diversity between Panels of the Franks Casket – Spelling and Runic Paleography

    Directory of Open Access Journals (Sweden)

    Helena Sobol

    2017-10-01

    Full Text Available The Franks Casket, a small whalebone box from about 700 AD, contains 59 Old English words inscribed in runes. Systematic differences between its panels have never called into question the standard procedure of explaining one panel basing on the others. The present paper aims at a re-examination of the validity of this approach. The panels show a large enough differentiation of spelling and paleographical features to exclude the possibility of a single author for the whole Casket.

  16. Barbarid, plastiliinijänes, Miriam ja Frank Muller / Annika Koppel

    Index Scriptorium Estoniae

    Koppel, Annika

    2003-01-01

    Nukufilm näitab 4 uut filmi : "Barbarid" (stsenaristid Andrus Kivirähk ja Hardi Volmer, režissöör H. Volmer), "Porgand" (stsenarist Peep Pedmanson, režissöör Pärtel Tall), "Miriami jõulupäkapikk" (stsenaristid Leelo Tungal ja Peep Pedmanson, režissöör Mait Laas), "Kuuvaatleja" (reklaamitreiler Frank Mulleri kellafirmale ; stsenarist, režissöör, kunstnik Mati Kütt)

  17. "Frank ja Wendy" rikub jõulud ja võtab söögiisu / Astrid Kannel

    Index Scriptorium Estoniae

    Kannel, Astrid, 1967-

    2004-01-01

    Animafilm "Frank ja Wendy" : autor David Snowman = Priit Pärn, Ülo Pikkov, Priit Tender ja Kaspar Jancis : Eesti Joonisfilm 2004. Kõik autorid vastavad midagi artikli autori provotseerivatele küsimustele

  18. Theoretical studies of the spin Hamiltonian parameters and local distortions for Cu{sup 2+} in alkaline earth lead zinc phosphate glasses

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Bo-Kun; Yuan, Zi-Yi; Liu, Zi-Xuan; Jiang, Shi-Xin; Liu, Zheng; Yao, Zi-Jian [University of Electronic Science and Technology of China, Chengdu (China). School of Yingcai Honors; Wu, Shao-Yi; Teng, Bao-Hua; Wu, Ming-He [University of Electronic Science and Technology of China, Chengdu (China). Dept. of Applied Physics

    2016-11-01

    The spin Hamiltonian parameters and local structures are theoretically studied for Cu{sup 2+}-doped alkaline earth lead zinc phosphate (RPPZ, R=Mg, Ca, Sr, and Ba) glasses based on the high-order perturbation calculations for a tetragonally elongated octahedral 3d{sup 9} cluster. The relative elongation ratios are found to be ρ ∼ 3.2%, 4.4%, 4.6%, and 3.3% for R=Mg, Ca, Sr, and Ba, respectively, because of the Jahn-Teller effect. The whole decreasing crystal-field strength Dq and orbital reduction factor k from Mg to Sr are ascribed to the weakening electrostatic coulombic interactions and the increasing probability of productivity of nonbridge oxygen (and hence increasing Cu{sup 2+}-O{sup 2-} electron cloud admixtures) under PbO addition, respectively, with increasing alkali earth ionic radius. The anomalies (the largest Dq and the next highest k among the systems) for R=Ba are attributed to the cross linkage of this large cation in the network. The overall increasing order (Mg≤Ba

  19. Andrij Makuch and Frank E. Sysyn, editors. Contextualizing the Holodomor: The Impact of Thirty Years of Ukrainian Famine Studies

    Directory of Open Access Journals (Sweden)

    Johnathon Vsetecka

    2017-03-01

    Full Text Available Book review of Andrij Makuch and Frank E. Sysyn, editors. Contextualizing the Holodomor: The Impact of Thirty Years of Ukrainian Famine Studies. Canadian Institute of Ukrainian Studies P, 2015. viii, 128 pp. $24.95, paper. Conference papers first published in East/West: Journal of Ukrainian Studies, editor-in-chief, Oleh S. Ilnytzkyj, guest editors, Frank Sysyn and Andrij Makuch, vol. 2, no. 1, 2015, pp. 3-132.

  20. "Frank" presentations as a novel research construct and element of diagnostic decision-making in autism spectrum disorder.

    Science.gov (United States)

    de Marchena, Ashley; Miller, Judith

    2017-04-01

    Many individuals with ASD have a distinctive behavioral presentation that is recognizable within moments, a phenomenon we call "frank" ASD. This phenomenon has been discussed informally for decades, perhaps as "classic" ASD; however, there is no unitary "classic" presentation, and classic autism does not seem to correspond to level of functioning. Thus, neither "frank" nor "classic" autism has been delineated or studied as a research construct. To initiate the empirical study of frank ASD, we surveyed 151 clinicians, from a range of disciplines that diagnose ASD, about this phenomenon. Respondents completed a 13-item questionnaire about frank ASD, which was analyzed using a mixed-methods approach. Ninety-seven percentage of respondents were familiar with the phenomenon. Respondents estimated that 40% of the ASD population has a frank presentation. Respondents reported the most highly specific behaviors associated with frank presentations were a general sense of impaired reciprocity, quality of eye contact, atypical vocal prosody, presence of motor mannerisms, and atypical gait or posture. In general, respondents reported detecting frank features rapidly, with the majority forming their impressions within the first ten minutes of interaction or observation. Although unstudied empirically, "frank" presentations of ASD are familiar to diagnosing clinicians, and appear to be based on behaviors both central to ASD diagnostic criteria (e.g., impaired reciprocity), and absent from diagnostic criteria (e.g., atypical gait or posture). We discuss these findings within the context of diagnostic decision-making and behavioral phenotyping of ASD. Autism Res 2016,. © 2016 International Society for Autism Research, Wiley Periodicals, Inc. Autism Res 2017, 10: 653-662. © 2016 International Society for Autism Research, Wiley Periodicals, Inc. © 2016 International Society for Autism Research, Wiley Periodicals, Inc.

  1. LA ESTRUCTURA ORGÁNICA EN LOS RASCACIELOS DE FRANK LLOYD WRIGHT / The organic structure in the skyscrapers of Frank Lloyd Wright

    Directory of Open Access Journals (Sweden)

    Alfonso Diaz Segura, Ricardo Meri de la Maza, Bartolomé Serra Soriano

    2013-05-01

    Full Text Available RESUMEN La estructura de la modernidad, en general, está al servicio de una nueva concepción espacial fluida y continua, condensada en torno al concepto de “planta libre”. Sin embargo, la riqueza y complejidad de articulación que adquieren las plantas, no se observa en la sección de los edificios, especialmente si se trata de rascacielos. El principio de crecimiento por superposición de plantas iguales y el carácter utilitario de la estructura en esta tipología, anularon su carácter iconográfico y su integración espacial. Frank Lloyd Wright, de modo natural, desarrolla una estructura para sus escasos rascacielos que integra espacio y forma, superando así tanto la simplificación funcional de la Escuela de Chicago, como el valor iconográfico de las experiencias europeas.SUMMARY In general, the structure of modernity serves a new, fluid and continuous, spatial conception, condensed around the “free floor” concept. However, the wealth and complexity of articulation that these floors acquire are not seen in the section of the buildings, especially in the case of skyscrapers. The principle of growth by superimposition of equal floors and the utilitarian character of the structure in this type of building, nullify the iconographic character of the structure and its spatial integration. Frank Lloyd Wright develops a structure for his few skyscrapers that integrates space and form in a natural way, thus surpassing both the functional simplification of the Chicago School, and the iconographic value of the European experiences.

  2. Poesia y Pintura: Frank O'Hara y el expresinionismo abstracto

    OpenAIRE

    Alberto Santamaría

    2015-01-01

    El objetivo de este artículo es analizar las relaciones entre poesía y pintura en el seno del expresionismo abstracto. Para ello tomamos tres nombres de referencia: Clement Greenberg (crítico de arte), Frank O'Hara (poeta) y Willem De Kooning (pintor). A través de estos nombres tratamos de señalar la estrecha relación que existía entre poetas y pintores en la llamada Escuela de Nueva York.

  3. Ophthalmic findings in Frank-ter Haar syndrome: report of a sibling pair.

    Science.gov (United States)

    Chang, Ta C; Bauer, Mislen; Puerta, Herminia S; Greenberg, Matthew B; Cavuoto, Kara M

    2017-12-01

    Frank-ter Haar syndrome (FTHS) is an autosomal recessive disorder characterized by abnormalities that affect the development of bone, heart, and eyes. We report a sibling pair with FTHS caused by a homozygous, novel mutation pLys133Glnfs*13 in the SH3PXD2B gene: one sibling had bilateral ocular hypertension and unilateral colobomas of iris, choroid and retina; the other, unilateral myelinated nerve fiber layer of the optic disk and papilledema due to idiopathic intracranial hypertension. Both children had refractive amblyopia and megalocornea. Copyright © 2017 American Association for Pediatric Ophthalmology and Strabismus. Published by Elsevier Inc. All rights reserved.

  4. Palaeopathology of the earlobe crease (Frank's sign): New insights from Renaissance art.

    Science.gov (United States)

    Galassi, Francesco M; Borghi, Claudio; Ballestriero, Roberta; Habicht, Michael E; Henneberg, Maciej; Rühli, Frank J

    2017-06-01

    Several studies have associated the earlobe crease sign, discovered by Sanders T. Frank in 1973, with cardiovascular pathology, yet very few studies have focused on the antiquity of this trait, with the most ancient one thought to date back to the Roman Emperor Hadrian (76-138CE). This article presents two more cases from the Italian Renaissance in the works of the artist Andrea Mantegna (1431-1506) and examines them in a multidisciplinary fashion. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. PERBANDINGAN ASURANSI LAST SURVIVOR DENGAN PENGEMBALIAN PREMI MENGGUNAKAN METODE COPULA FRANK, COPULA CLAYTON, DAN COPULA GUMBEL

    Directory of Open Access Journals (Sweden)

    I GEDE DICKY ARYA BRAMANTA

    2017-10-01

    Full Text Available This study examines about last survivor life insurance with return of premium for married couples with independent and dependent mortality model. By using Frank copula, Clayton copula, Gumbel copula and Indonesian Mortalita Table 2011, the impact of future life dependence on single premiums and annually premium is evaluated. Based on the calculation of premium with a 10 year contract for the insured parties aged 58 years and 55 years with interest rate used 6.5%, the value of insurance premium last survivor with return of premium is more expensive than without return of premium. The greater the dependency, the more expensive the price of the premium.

  6. Theoretical requirements to tolerances to be imposed on fuel rod design parameters for RBEC-M lead-bismuth fast reactor

    International Nuclear Information System (INIS)

    Vasiliev, A.; Alekseev, P.; Mikityuk, K.; Fomichenko, P.; Shestopalov, A.

    2002-01-01

    Development of advanced reactors with innovative materials requires comprehensive analysis of fuel rod design parameters as well as tolerances to be imposed on these parameters. Currently, it is considered traditional to estimate uncertainties in core neutronics parameters on the basis of known tolerances imposed on fuel rod design parameters. However, requirements to some core neutronics parameters of advanced reactors can be first formulated and then taken into account, while developing the technologies for innovative fuel rod manufacturing, i.e. an 'inverse' problem can be solved. The aim of this problem is to find combinations of fuel rod design tolerances which provide that selected core neutronics parameters remain within specified deviations during base irradiation. (authors)

  7. The core structure of a Frank dislocation in Ni3(Al,Nb)

    International Nuclear Information System (INIS)

    Bonnet, R.; Loubradou, M.; Derder, C.; Catana, A.

    1991-01-01

    This paper reports on the core structures of dislocations in L1 2 crystals, in view of understanding the anomalous yield behavior of strength with increasing temperature. Theoretical approaches have been proposed for explaining the dissociations of these dislocations, and experimental evidences have been reported for such dissociations using either the weak beam technique or more recently the HRTEM (High Resolution Transmission Electron Microscopy) technique. Recent HRTEM results show that for Ni 3 A1 the partial dislocations 1/2 left-angle 110 right-angle which limit an APB (Antiphase Boundary) lying on (001) are only split over 0.1 - 0.3 nm along (111) planes, producing very high energy CSF's (Complex Stacking Faults) which limit an SISF (superlattice Intrinsic Stacking Fault) extended on a (111) plane. Concerning the 1/2 left-angle 111 right-angle Frank dislocation, which limits an SESF (Superlattice Extrinsic Stacking Fault), there are no reported results yet. Let us note, however, that for aluminum HRTEM images of Frank dislocation loops have been studied. This lack of information in the L1 2 crystals motivated the present HRTEM study

  8. Frank-ter Haar syndrome protein Tks4 regulates epidermal growth factor-dependent cell migration.

    Science.gov (United States)

    Bögel, Gábor; Gujdár, Annamária; Geiszt, Miklós; Lányi, Árpád; Fekete, Anna; Sipeki, Szabolcs; Downward, Julian; Buday, László

    2012-09-07

    Mutations in the SH3PXD2B gene coding for the Tks4 protein are responsible for the autosomal recessive Frank-ter Haar syndrome. Tks4, a substrate of Src tyrosine kinase, is implicated in the regulation of podosome formation. Here, we report a novel role for Tks4 in the EGF signaling pathway. In EGF-treated cells, Tks4 is tyrosine-phosphorylated and associated with the activated EGF receptor. This association is not direct but requires the presence of Src tyrosine kinase. In addition, treatment of cells with LY294002, an inhibitor of PI 3-kinase, or mutations of the PX domain reduces tyrosine phosphorylation and membrane translocation of Tks4. Furthermore, a PX domain mutant (R43W) Tks4 carrying a reported point mutation in a Frank-ter Haar syndrome patient showed aberrant intracellular expression and reduced phosphoinositide binding. Finally, silencing of Tks4 was shown to markedly inhibit HeLa cell migration in a Boyden chamber assay in response to EGF or serum. Our results therefore reveal a new function for Tks4 in the regulation of growth factor-dependent cell migration.

  9. Comparison of two views of maximum entropy in biodiversity: Frank (2011) and Pueyo et al. (2007).

    Science.gov (United States)

    Pueyo, Salvador

    2012-05-01

    An increasing number of authors agree in that the maximum entropy principle (MaxEnt) is essential for the understanding of macroecological patterns. However, there are subtle but crucial differences among the approaches by several of these authors. This poses a major obstacle for anyone interested in applying the methodology of MaxEnt in this context. In a recent publication, Frank (2011) gives some arguments why his own approach would represent an improvement as compared to the earlier paper by Pueyo et al. (2007) and also to the views by Edwin T. Jaynes, who first formulated MaxEnt in the context of statistical physics. Here I show that his criticisms are flawed and that there are fundamental reasons to prefer the original approach.

  10. Analysis of the bioclimatic strategies used by Frank Lloyd Wright in the Jacobs I house

    Directory of Open Access Journals (Sweden)

    M. Beltrán-Fernández

    2017-10-01

    Full Text Available Frank Lloyd Wright is considered one of the most influential architects of modern architecture due to the spatial and aesthetic qualities of his work. However, the importance of Wright’s construction and environmental solutions has been usually overlooked. In order to evaluate these qualities, the first house that Wright designed for the Jacobs family (Wisconsin, USA, 1937 has been analyzed. This well-known building has been much studied, and its architectural value much celebrated, but without analysing the advantages of the bioclimatic principles over interior environment. But how can the influence of this bioclimatic architecture be measured in terms of thermal comfort? Does the selected orientation improve interior comfort? And what about the natural ventilation or the deep overhangs? In order to assess this, a digital model for energy simulation has been built using Revit and Design Builder.

  11. An inevitable end? The collapse of the Lombard kingdom facing the Franks and the papacy

    Directory of Open Access Journals (Sweden)

    Stefano Gasparri

    2016-09-01

    Full Text Available According to the Italian historiography, from Alessandro Manzoni (1822 to the two major Italian historians who studied the Lombards at the middle of the twentieth century, Gian Piero Bognetti and Ottorino Bertolini, the Lombards remained always separated from the Roman population, of which the pope was the natural leader; the Lombards, too, became very late Catholics, in time, though, to experience the "drama" of having to fight against the pope, whose supreme spiritual authority the Lombards themselves at that point recognized. Consequently, the fall of the independent kingdom by the hands of the Franks would be logical and inevitable. This is an old and outdated position: the end of the independent Lombard kingdom wasn’t inevitable. At the time of the Frankish conquest, the kingdom was politically solid inward, in economic growth and very dynamic outward. During the reigns of Liutprand, Ratchis and Aistulf (712-757, the kingdom exercised its hegemony over the whole Italy. In this period no strong elements of internal weakness emerged. Therefore, the defeat of 774 was substantially caused by external factors, ie the alliance between the Franks and the papacy. However, the attitude of the popes against the Lombard kingdom was not always hostile. Things changed only with Stephen II, because of two simultaneous events occurring in 751: the royal anointing of Pepin in the Frankish kingdom and the conquest of the Exarchate by Aistulf. Italian political balance broke and caused the decisive rapprochement between Rome and the Franks. But there were still many uncertainties, as proved, for example, by Charlemagne’s marriage with a daughter of Desiderius. Carloman’s death in 771 and, the following year, the election of the new pope Adrian I caused the repudiation of the Lombard bride by Charlemagne, his descent into Italy in 773, and the capture of Pavia the year after: Desiderius was exiled in France and Charlemagne became rex Langobardorum. The

  12. The Oseen-Frank Limit of Onsager's Molecular Theory for Liquid Crystals

    Science.gov (United States)

    Liu, Yuning; Wang, Wei

    2018-03-01

    We study the relationship between Onsager's molecular theory, which involves the effects of nonlocal molecular interactions and the Oseen-Frank theory for nematic liquid crystals. Under the molecular setting, we prove the existence of global minimizers for the generalized Onsager's free energy, subject to a nonlocal boundary condition which prescribes the second moment of the number density function near the boundary. Moreover, when the re-scaled interaction distance tends to zero, the global minimizers will converge to a uniaxial distribution predicted by a minimizing harmonic map. This is achieved through the investigations of the compactness property and the boundary behaviors of the corresponding second moments. A similar result is established for critical points of the free energy that fulfill a natural energy bound.

  13. Frank McCourt’s Teacher Man: A Novel Approach to Teacher Learning and Professional Development

    Directory of Open Access Journals (Sweden)

    Renate Schulz

    2009-07-01

    Full Text Available The purpose of this research was to investigate how stories can be a learning tool to help teachers make sense of and learn from their own stories of teaching. The participants in this study were teachers enrolled in a graduate level course.  Frank McCourt’s novel, Teacher Man acted as a stimulus, springboard and guide for class discussions and for teachers writing their own story of teaching. My mode of inquiry included collecting the teachers’ written responses to class readings, noting their oral responses during class discussions, asking them to complete a short questionnaire, and following up with a taped focus group three months after the completion of the course. By reading, hearing and discussing the stories of others, teachers came to recognize the power of stories.  Writing their own stories helped them to understand their own practice better.

  14. The Impact of the Dodd-Frank Act on Financial Stability and Economic Growth

    Directory of Open Access Journals (Sweden)

    Martin Neil Baily

    2017-01-01

    Full Text Available This article assesses the benefits and costs of key provisions of the Dodd-Frank Act that strengthened regulation following the financial crisis. The provisions are placed into five groupings: clear wins, clear losses, costly tradeoffs, unfinished business, and too soon to tell. Clear wins include higher prudential standards, including for capital; the single-point-of-entry resolution authority; creation of the Consumer Financial Protection Bureau; and greater transparency and oversight of derivatives. Clear losses are restrictions on Federal Reserve emergency lending authority and forcing the Federal Deposit Insurance Corporation to obtain permission from Congress before providing temporary liquidity guarantees. Costly tradeoffs are the Volcker Rule and the Lincoln Amendment. Unfinished business includes regulatory consolidation and more independence for the Financial Stability Oversight Council and the Office of Financial Research. Too soon to tell are requirements and standards for leverage ratios, capital buffers, stress testing, and liquidity requirements.

  15. A Novel is a Lengthy Question: An Interview with Frank Ronan

    OpenAIRE

    Valentina Milli

    2007-01-01

    Frank Ronan has published a collection of short stories, Handsome Men Are Slightly Sunburnt (1996), and six novels, The Men Who Loved Evelyn Cotton(1989), A Picnic in Eden (1991), The Better Angel (1992), Dixie Chicken (1994), Lovely (1996) and Home (2002), many of which have been translated into French, Spanish, German, Portuguese, Italian, Greek and Dutch. It is extremely difficult to pigeonhole Ronan’s writing and, according to him, it is also pointless since “it’s always the people who do...

  16. A Novel is a Lengthy Question: An Interview with Frank Ronan

    Directory of Open Access Journals (Sweden)

    Valentina Milli

    2007-03-01

    Full Text Available Frank Ronan has published a collection of short stories, Handsome Men Are Slightly Sunburnt (1996, and six novels, The Men Who Loved Evelyn Cotton(1989, A Picnic in Eden (1991, The Better Angel (1992, Dixie Chicken (1994, Lovely (1996 and Home (2002, many of which have been translated into French, Spanish, German, Portuguese, Italian, Greek and Dutch. It is extremely difficult to pigeonhole Ronan’s writing and, according to him, it is also pointless since “it’s always the people who don’t read books who want to categorise them”. The following interview throws some new light on this brilliant contemporary Irish writer and his multifarious areas of interest.

  17. Modern housing design: prefabricated and modular design in Frank Lloyd Wright's architecture

    Directory of Open Access Journals (Sweden)

    Ana Tagliari

    2011-12-01

    Full Text Available This paper investigates the residential architecture of Frank Lloyd Wright, especially the designs which were conceived from an idea of prefabricated, modular, low-cost, and high-scale construction. Wright's organic designs originated from a material-based grid, which at the same time organized and provided freedom to create spaces and forms. This study reviews Wright's work, from his first Midwest designs that relied on brick, through an intermediary phase in California when he made intense use of concrete blocks, until his last phase, the usonian houses, which featured wood paneling. During his early career, the concept and the methodology of Wright's ideas greatly contributed to a better understanding of his architecture, his apprentices and his followers. The economy and rationalization found in the projects reviewed are of great importance as the analysis of historical proposals helps us understand the topic in question.

  18. Mediations on Emergent Occasions: Mad Men, Donald Draper and Frank O’Hara

    Directory of Open Access Journals (Sweden)

    Kate Lilley

    2012-09-01

    Full Text Available Frank O’Hara’s 1957 poetry collection, Meditations in an Emergency, features in Season Two of Mad Men (2008 as a talismanic phrase and object. Pressed into service as Matthew Weiner’s valentine to his returning viewers, the circulation and citation of the book across the season, through different diegetic and extradiegetic levels, aligns poetry, advertising and quality serial television drama as textual modes intent, above all, on creating attachment through feeling. O’Hara’s book is a crucial link in a series of metonymic relays, chain effects and affects, which underwrite Mad Men’s citational poetics to assert its own cultural authority, and the mediating power of television.

  19. Some considerations in the splitting of interstitial frank loops formed by irradiation

    International Nuclear Information System (INIS)

    Seshan, K.; Grilhe, J.; Washburn, J.

    1975-05-01

    The splitting of interstitial loops formed by irradiation is considered in detail. It is shown that they may split to form obtuse--angled single shear faults on the intersecting (111) planes. A detailed description of the splitting is given in which the interstitial Frank loop is viewed as being made up of perfect dislocation loop and two shears. The detailed description is then considered in the context of the formation of complex loops as are observed in quenching and irradiation studies. Experimentally observed geometries are explained viz, triangular loops within hexagonal ones etc. The nucleation of a DC' loop in complex interstitial loop formation is shown to be feasible. DC' has the magnitude of a perfect dislocation loop and encloses an intrinsic shear

  20. Spatial History e humanidades digitais, uma entrevista com o brasilianista Zephyr Frank

    Directory of Open Access Journals (Sweden)

    FREDERICO FREITAS

    2014-04-01

    Full Text Available Resumo: Entrevista com Zephyr Frank, diretor do Spatial History Project (Projeto de História Espacial e do Center for Spatial and Textual Analysis (Centro de Análise Espacial e Textual da Universidade Stanford, nos Estados Unidos, sobre spatial history e outras linhas de pesquisa englobadas sob o rótulo das humanidades digitais. A discussão toca o tema do uso de novos métodos digitais como o SIG histórico, a leitura à distância e a análise de redes sociais na pesquisa em humanidades, questionando os limites e as possibilidades de tais ferramentas. Por fim, discute-se sobre o investimento institucional e financeiro necessário para a implementação dessas novas tecnologias de pesquisa.Palavras-chave: Spatial History – Humanidades Digitais – Redes Sociais – Leitura à Distância. Abstract: An interview with Zephyr Frank, director of both the Spatial History Project and the Center for Spatial and Textual Analysis at Stanford University, on spatial history and other lines of research encompassed by the digital humanities label. The discussion touches on the new digital methods of research like historical GIS, distant reading, and social network analysis, which are becoming more common among humanists. It also questions the possibilities and limits of such tools. Finally, it presents a brief discussion on the institutional and financial resources needed for implementing those new research technologies.Keywords: Spatial History – Digital Humanities – Social Networks – Distant Reading.

  1. Deposition of lead-silicate glassy thin coatings by RF magnetron sputtering: Correlation between deposition parameters and electrical and structural properties

    International Nuclear Information System (INIS)

    Rigato, V.; Maggioni, G.; Boscarino, D.; Della Mea, G.; Univ. di Trento, Mesiano

    1996-01-01

    Lead-silicate glassy thin films produced by means of Reactive Radio Frequency Magnetron Sputtering have found recent application in the development of MicroStrip Gas Chambers radiation detectors. Here, thin films (100--400 nm) of lead silicate glass have been deposited by RF magnetron sputtering in Ar plasma at different discharge conditions. The interaction of the sputtered species with the gas atoms during the transport process through the discharge region and the kinetics of growth of the films have been investigated as a function of the target composition and of the substrate temperature. This study demonstrates the possibility of controlling the surface electrical resistance of the films in a wide range of values ranging from 10 12 to 10 17 Ω/□ during the film growth

  2. 76 FR 48949 - Office of Thrift Supervision Integration Pursuant to the Dodd-Frank Wall Street Reform and...

    Science.gov (United States)

    2011-08-09

    ... accounts from the HOLA. Section 157.14 provided that savings associations could pay interest only on.... Section 1046 of the Dodd-Frank Act provides that the Home Owners' Loan Act (HOLA) does not occupy the... a court or by the OCC under the HOLA with respect to Federal savings associations must be made in...

  3. Does digital mammography in a decentralized breast cancer screening program lead to screening performance parameters comparable with film-screen mammography?

    International Nuclear Information System (INIS)

    Ongeval, Chantal van; Steen, Andre van; Zanca, Federica; Bosmans, Hilde; Marchal, Guy; Putte, Gretel vande; Limbergen, Erik van

    2010-01-01

    To evaluate if the screening performance parameters of digital mammography (DM) in a decentralized screening organization were comparable with film-screen mammography (FSM). A nationwide screening program was launched in 2001, and since 2005 screening with DM has been allowed. Firstly, the parameters of the three regional screening units (RSUs) that first switched to DM (11,355 women) were compared with the FSM period of the same three RSUs (23,325 women). Secondly, they were compared with the results of the whole central breast unit (CBU). The recall rate (RR) of the DM group in the initial round was 2.64% [2.40% for FSM (p = 0.43)] and in the subsequent round 1.20% [1.58% for FSM (p = 0.03)]. The cancer detection rate (CDR) was 0.59% for DM and 0.64% for FSM (p = 0.56). The percentage of ductal carcinoma in situ was 0.07% for DM and 0.16% for FSM (p = 0.02). The positive predictive value was high in the subsequent rounds (DM 48.00%, FSM 45.93%) and lower in the initial round (DM 24.05%, FSM 24.86%). Compared with the results of the whole CBU, DM showed no significant difference. DM can be introduced in a decentralized screening organization with a high CDR without increasing the RR. (orig.)

  4. LEADING WITH LEADING INDICATORS

    International Nuclear Information System (INIS)

    PREVETTE, S.S.

    2005-01-01

    This paper documents Fluor Hanford's use of Leading Indicators, management leadership, and statistical methodology in order to improve safe performance of work. By applying these methods, Fluor Hanford achieved a significant reduction in injury rates in 2003 and 2004, and the improvement continues today. The integration of data, leadership, and teamwork pays off with improved safety performance and credibility with the customer. The use of Statistical Process Control, Pareto Charts, and Systems Thinking and their effect on management decisions and employee involvement are discussed. Included are practical examples of choosing leading indicators. A statistically based color coded dashboard presentation system methodology is provided. These tools, management theories and methods, coupled with involved leadership and employee efforts, directly led to significant improvements in worker safety and health, and environmental protection and restoration at one of the nation's largest nuclear cleanup sites

  5. Chalcone Synthase (CHS) Gene Suppression in Flax Leads to Changes in Wall Synthesis and Sensing Genes, Cell Wall Chemistry and Stem Morphology Parameters

    Science.gov (United States)

    Zuk, Magdalena; Działo, Magdalena; Richter, Dorota; Dymińska, Lucyna; Matuła, Jan; Kotecki, Andrzej; Hanuza, Jerzy; Szopa, Jan

    2016-01-01

    The chalcone synthase (CHS) gene controls the first step in the flavonoid biosynthesis. In flax, CHS down-regulation resulted in tannin accumulation and reduction in lignin synthesis, but plant growth was not affected. This suggests that lignin content and thus cell wall characteristics might be modulated through CHS activity. This study investigated the possibility that CHS affects cell wall sensing as well as polymer content and arrangement. CHS-suppressed and thus lignin-reduced plants showed significant changes in expression of genes involved in both synthesis of components and cell wall sensing. This was accompanied by increased levels of cellulose and hemicellulose. CHS-reduced flax also showed significant changes in morphology and arrangement of the cell wall. The stem tissue layers were enlarged averagely twofold compared to the control, and the number of fiber cells more than doubled. The stem morphology changes were accompanied by reduction of the crystallinity index of the cell wall. CHS silencing induces a signal transduction cascade that leads to modification of plant metabolism in a wide range and thus cell wall structure. PMID:27446124

  6. Numerical analysis of stress effects on Frank loop evolution during irradiation in austenitic Fe&z.sbnd;Cr&z.sbnd;Ni alloy

    Science.gov (United States)

    Tanigawa, Hiroyasu; Katoh, Yutai; Kohyama, Akira

    1995-08-01

    Effects of applied stress on early stages of interstitial type Frank loop evolution were investigated by both numerical calculation and irradiation experiments. The final objective of this research is to propose a comprehensive model of complex stress effects on microstructural evolution under various conditions. In the experimental part of this work, the microstructural analysis revealed that the differences in resolved normal stress caused those in the nucleation rates of Frank loops on {111} crystallographic family planes, and that with increasing external applied stress the total nucleation rate of Frank loops was increased. A numerical calculation was carried out primarily to evaluate the validity of models of stress effects on nucleation processes of Frank loop evolution. The calculation stands on rate equuations which describe evolution of point defects, small points defect clusters and Frank loops. The rate equations of Frank loop evolution were formulated for {111} planes, considering effects of resolved normal stress to clustering processes of small point defects and growth processes of Frank loops, separately. The experimental results and the predictions from the numerical calculation qualitatively coincided well with each other.

  7. War, Medicine, and Cultural Diplomacy in the Americas: Frank Wilson and Brazilian cardiology.

    Science.gov (United States)

    Kropf, Simone P; Howell, Joel D

    2017-10-01

    American cultural diplomacy played a key role in the institutionalization of Brazilian cardiology. In 1942, Frank Wilson, an internationally recognized pioneer in electrocardiography, made an extended wartime visit to Rio de Janeiro and São Paulo. The visit was sponsored by the United States Department of State as part of Roosevelt's Good Neighbor Policy and brought Wilson together with a group of physicians who would establish the specialty of cardiology in Brazil. This US cultural and diplomatic initiative strengthened an academic network that was already evolving and would eventually prove to be of benefit to both sides. Latin American physicians began in the 1920s to visit Wilson's laboratory at the University of Michigan, where they established the relationships on which Wilson would build. While affiliation with the "Wilson school" advanced the cause of Brazilian cardiologists who sought to establish themselves as specialists, cooperation with Latin American physicians benefitted Wilson in his pursuit of wider recognition for his innovations in the use of electrocardiography (ECG). Wilson's identity as a scientific ambassador to Latin America helped in legitimating his approach to the clinical application of the ECG. A close examination of Wilson's relationship to Brazilian cardiology demonstrates the role played by science and medicine as a part of wartime cultural diplomacy, as well as the dynamics of the transnational circulation of scientific knowledge and practices. © The Author 2017. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  8. Risk, uncertainty and prophet: The psychological insights of Frank H. Knight

    Directory of Open Access Journals (Sweden)

    Tim Rakow

    2010-10-01

    Full Text Available Economist Frank H. Knight (1885--1972 is commonly credited with defining the distinction between decisions under ``risk'' (known chance and decisions under ``uncertainty'' (unmeasurable probability in his 1921 book Risk, Uncertainty and Profit. A closer reading of Knight (1921 reveals a host of psychological insights beyond this risk-uncertainty distinction, many of which foreshadow revolutionary advances in psychological decision theory from the latter half of the 20th century. Knight's description of economic decision making shared much with Simon's (1955, 1956 notion of bounded rationality, whereby choice behavior is regulated by cognitive and environmental constraints. Knight described features of risky choice that were to become key components of prospect theory (Kahneman and Tversky, 1979: the reference dependent valuation of outcomes, and the non-linear weighting of probabilities. Knight also discussed several biases in human decision making, and pointed to two systems of reasoning: one quick, intuitive but error prone, and a slower, more deliberate, rule-based system. A discussion of Knight's potential contribution to psychological decision theory emphasises the importance of a historical perspective on theory development, and the potential value of sourcing ideas from other disciplines or from earlier periods of time.

  9. On the Connection between Kinetic Monte Carlo and the Burton-Cabrera-Frank Theory

    Science.gov (United States)

    Patrone, Paul; Margetis, Dionisios; Einstein, T. L.

    2013-03-01

    In the many years since it was first proposed, the Burton- Cabrera-Frank (BCF) model of step-flow has been experimentally established as one of the cornerstones of surface physics. However, many questions remain regarding the underlying physical processes and theoretical assumptions that give rise to the BCF theory. In this work, we formally derive the BCF theory from an atomistic, kinetic Monte Carlo model of the surface in 1 +1 dimensions with one step. Our analysis (i) shows how the BCF theory describes a surface with a low density of adsorbed atoms, and (ii) establishes a set of near-equilibrium conditions ensuring that the theory remains valid for all times. Support for PP was provided by the NIST-ARRA Fellowship Award No. 70NANB10H026 through UMD. Support for TLE and PP was also provided by the CMTC at UMD, with ancillary support from the UMD MRSEC. Support for DM was provided by NSF DMS0847587 at UMD.

  10. The Anne Frank Haven: A case of an alternative educational program in an integrative Kibbutz setting

    Science.gov (United States)

    Ben-Peretz, Miriam; Giladi, Moshe; Dror, Yuval

    1992-01-01

    The essential features of the programme of the Anne Frank Haven are the complete integration of children from low SES and different cultural backgrounds with Kibbutz children; a holistic approach to education; and the involvement of the whole community in an "open" residential school. After 33 years, it is argued that the experiment has proved successful in absorbing city-born youth in the Kibbutz, enabling at-risk populations to reach significant academic achievements, and ensuring their continued participation in the dominant culture. The basic integration model consists of "layers" of concentric circles, in dynamic interaction. The innermost circle is the class, the learning community. The Kibbutz community and the foster parents form a supportive, enveloping circle, which enables students to become part of the outer community and to intervene in it. A kind of meta-environment, the inter-Kibbutz partnership and the Israeli educational system, influence the program through decision making and guidance. Some of the principles of the Haven — integration, community involvement, a year's induction for all new students, and open residential settings — could be useful for cultures and societies outside the Kibbutz. The real "secret" of success of an alternative educational program is the dedicated, motivated and highly trained staff.

  11. “The root of all evil”: Frank McGuinness’ Translations of Greek Drama

    Directory of Open Access Journals (Sweden)

    Loredana Salis

    2014-07-01

    Full Text Available Whether in political propaganda or in creative the myths of ancient Greece have long attracted scholars, writers and audiences from Ireland. Over the past forty years, a wealth of adaptations of plays by Sophocles and Euripides have been produced, which bring back to life ancient tales of heroes and heroines, in settings at times distinctively local and contemporary, at times deliberately universal. Field Day’s contributions represent a typical instance of the former approach to the classics, while other Irish playwrights have used Greek myths to reflect upon questions that are not exclusively Irish. Their plays may have an Irish echo, and some are even set in Ireland, but their main preoccupation lies beyond geographical borders. Frank McGuinness belongs to this second group of playwrights. To date, he has reworked and staged five Greek plays with great audience and critical acclaim. This paper locates his translations of Sophocles and Euripides within the tradition of classical tragedy use in Ireland at the crossroads between the local and the global and at the search of what he calls ‘the root of all evil’ with special attention to his Oedipus (2008 and Helen (2009.

  12. Testing of Frank's hypothesis on a containerless packing of macroscopic soft spheres and comparison with mono-atomic metallic liquids

    International Nuclear Information System (INIS)

    Sahu, K.K.; Wessels, V.; Kelton, K.F.; Loeffler, J.F.

    2011-01-01

    Highlights: → Testing of Frank's hypothesis for Centripetal Packing (CP) has been proposed. → It is shown that CP is an idealized model for Monatomic Supercooled Liquid (MSL). → The CP is fit for comparing with studies on MSL in a containerless environment. → We measure local orders in CP by HA and BOO methods for the first time. → It is shown that icosahedral order is greater in CP than MSL and reasons explored. - Abstract: It is well-known that metallic liquids can exist below their equilibrium melting temperature for a considerable time. To explain this, Frank proposed that icosahedral ordering, incompatible with crystalline long-range order, is prevalent in the atomic structure of these liquids, stabilizing them and enabling them to be supercooled. Some studies of the atomic structures of metallic liquids using Beam-line Electrostatic Levitation (BESL; containerless melting), and other techniques, support this hypothesis . Here we examine Frank's hypothesis in a system of macroscopic, monodisperse deformable spheres obtained by containerless packing under the influence of centripetal force. The local structure of this packing is analyzed and compared with atomic ensembles of liquid transition metals obtained by containerless melting using the BESL method.

  13. Victorian Imag(ining of the Pagan Pyre: Frank Dicksee's 'Funeral of a Viking'

    Directory of Open Access Journals (Sweden)

    Nancy Rose Marshall

    2017-12-01

    Full Text Available Victorians drew on imagery of Druid and Viking funeral pyres as a way of exploring alternative narratives of death and burial, generating a collective attention to what happened to a body after death. I set Frank Dicksee’s oil painting, 'Funeral of a Viking' (1893, against the background of the emergent cremation movement and accounts of the neo-Druid William Price, a proponent for the legalization of cremation in the 1880s, in order to glimpse the work performed by the visualization of the ritualized burning of human beings in the pagan past. Fire produces metamorphosis in the objects it encounters, and Dicksee’s portrayal underscores the notion of a clearly delineated human body transforming into amorphous flame. Moreover, the Viking dissolves into pigment itself, mere aesthetic effect taking the place of a recognizable figure. In fictional accounts such as Paul Du Chaillu’s novel 'Ivar the Viking '(1893, the pyre as a narrative tool similarly forced attention to the body as dematerializing thing and to the language articulating this dissipation. I suggest that the Victorian fascination with pagan fire-death allowed for alternate visions of form–matter relationships that in turn might produce new aesthetic possibilities. As the Christian world insisted on the resurrection of the body in a way that clung fiercely to tangibility and bounded form even in the face of belief in the immortality of the saved soul, the modern moment might be seen, in contrast, as characterized by an embrace of an aesthetic of dissolving form or formlessness.

  14. Popular Science and Apocalyptic Narrative in Frank Schätzing’s The Swarm

    Directory of Open Access Journals (Sweden)

    Gabriele Dürbeck

    2012-01-01

    Full Text Available This paper analyses the use of the rhetoric of the Apocalypse and the concept of nature's revenge in Frank Schätzing's eco-thriller The Swarm. Ecocritical research has identified these narrative patterns as characteristic of contemporary environmental literature. In The Swarm, the apocalyptical rhetoric fulfils the double function of providing thrill and pleasure to the readers and warning them about imminent environmental peril, thereby combining conventions from the two genres of eco-thriller and science fiction. Contrasting reviews have described the novel as either enlightening or pseudo-religious. This ambivalence is the effect of various strategies employed to popularise scientific knowledge in the novel. The narrative embraces various scientific fields, for example the depiction of a network in contrast to swarm theory. The key conflict in the story embodies conflicting concepts of nature - anthropocentric vs. eco-systemic - which are represented by two contrasting groups of characters: one aiming to extinguish the alien superorganism that attacks the human race, the other aspiring to integrate the alien organism into the human world and propagating a holistic view of the Earth. The concepts of a 'tragic' and a 'comical apocalypse' correspond to the double closure which first features a show-down, the annihilation of the 'bad' characters, and then, in the epilogue, a warning message delivered by a 'good' character which confirms - in contrast to, for example, Michael Crichton's State of Fear - the ongoing environmental crisis. Although the epilogue extensively appeals to the human ability to rethink attitudes towards nature, the novel's support for environmental concerns is limited, not only because this message remains rather abstract but also because the vision of a reconciled, pseudo-religious ecosystem as a holistic superorganism has a highly ambivalent meaning for humanity.

  15. Effects of stacking fault energies on the interaction between an edge dislocation and an 8.0-nm-diameter Frank loop of self-interstitial atoms

    Directory of Open Access Journals (Sweden)

    S. Hayakawa

    2016-12-01

    Full Text Available Molecular dynamics simulations were conducted to investigate the effects of stacking fault energy (SFE as a single variable parameter on the interaction between an edge dislocation and a Frank loop of self-interstitial atoms with a diameter of 8.0nm. The physical contact between the edge dislocation and the loop causes constriction of the edge dislocation, followed by the formation of a D-Shockley partial dislocation. The latter process is associated with either the formation of a screw component and its cross-slip, or the direct core reaction between the dislocation and the loop. These processes induce either the absorption of the loop into the dislocation or the transformation of the loop into a perfect loop. The SFE influences the interaction morphologies by determining the separation distance of the two partial dislocations and consequently the rate of constriction. The dependence of the interaction morphology on the SFE varies with the habit plane of the loop. A higher SFE increases the probability of the absorption or transformation interaction; however, only loop shearing is observed at the lower limit of the SFE range of austenitic stainless steels.

  16. Relative contributions of energy expenditure on physical activity, body composition and weight gain to the evolution of impaired glucose to tolerance to Frank diabetes

    International Nuclear Information System (INIS)

    Forrester, T.; Wilks, R.; Gaskin, P.; Luke, A.; Jahoor, F.; Adeyemo, A.

    2002-01-01

    There is a gradient of diabetes prevalence among populations of the African Diaspora, with a rate of about 1% in West Africa, 12% in Jamaica and 16% in the United States. A population-based survey was conducted in an urban community in Jamaica to document the risk factors for the evolution of impaired glucose tolerance to frank diabetes. In a sample of 614 adults, 239 men and 375 women, oral glucose tolerance tests and examinations were conducted at Baseline and after 4-years of Follow-Up. There were significant increases in virtually all weight and adiposity variables for both men and women. Energy expenditure was also measured in a subset of participants at Follow-Up and was related significantly to glucose tolerance status. Among men, baseline age, weight, fat mass, body fat, waist circumference, and change in waist circumference were predictive of worsening glucose tolerance status. Among women, only age and change in waist circumference was a significant predictor. No physical activity parameter was predictive of change in tolerance status. These results provide support for the need to decrease adiposity as an important mechanism to control the rise in diabetes prevalence. (author)

  17. Optimization of the scintillation parameters of the lead tungstate crystals for their application in high precision electromagnetic calorimetry; Optimisation des parametres de scintillation des cristaux de tungstate de plomb pour leur application dans la calorimetrie electromagnetique de haute precision

    Energy Technology Data Exchange (ETDEWEB)

    Drobychev, G

    2000-04-12

    In the frame of this dissertation work scintillation properties of the lead tungstate crystals (PWO) and possibilities of their use were studied foreseeing their application for electromagnetic calorimetry in extreme radiation environment conditions of new colliders. The results of this work can be summarized in the following way. 1. A model of the scintillations origin in the lead tungstate crystals which includes processes influencing on the crystals radiation hardness and presence of slow components in scintillations was developed. 2. An analysis of the influences of the PWO scintillation properties changes on the parameters of the electromagnetic calorimeter was done. 3. Methods of the light collection from the large scintillation elements of complex shape made of the birefringent scintillation crystal with high refraction index and low light yield in case of signal registration by a photodetector with sensitive surface small in compare with the output face of scintillator were Studied. 4. Physical principles of the methodology of the scintillation crystals certification during their mass production foreseeing their installation into a calorimeter electromagnetic were developed. Correlations between the results of measurements of the PWO crystals parameters by different methods were found. (author)

  18. Lead poisoning

    Science.gov (United States)

    ... drinking water in homes containing pipes that were connected with lead solder . Although new building codes require ... lead in their bodies when they put lead objects in their mouths, especially if they swallow those ...

  19. Lead Poisoning

    Science.gov (United States)

    Lead is a metal that occurs naturally in the earth's crust. Lead can be found in all parts of our ... from human activities such as mining and manufacturing. Lead used to be in paint; older houses may ...

  20. Depth distribution of Frank loop defects formed in ion-irradiated stainless steel and its dependence on Si addition

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Dongyue, E-mail: dychen@safety.n.t.u-tokyo.ac.jp [The University of Tokyo, Department of Nuclear Engineering and Management, School of Engineering, 7-3-1 Hongo Bunkyo-ku, Tokyo 113-8656 (Japan); Murakami, Kenta [The University of Tokyo, Nuclear Professional School, School of Engineering, 2-22 Shirakata-Shirane, Tokai-mura, Ibaraki 319-1188 (Japan); Dohi, Kenji; Nishida, Kenji; Soneda, Naoki [Central Research Institute of Electric Power Industry, 2-11-1 Iwado-kita, Komae, Tokyo 201-8511 (Japan); Li, Zhengcao, E-mail: zcli@tsinghua.edu.cn [Tsinghua University, School of Materials Science and Engineering, Beijing 100084 (China); Liu, Li; Sekimura, Naoto [The University of Tokyo, Department of Nuclear Engineering and Management, School of Engineering, 7-3-1 Hongo Bunkyo-ku, Tokyo 113-8656 (Japan)

    2015-12-15

    Although heavy ion irradiation is a good tool to simulate neutron irradiation-induced damages in light water reactor, it produces inhomogeneous defect distribution. Such difference in defect distribution brings difficulty in comparing the microstructure evolution and mechanical degradation between neutron and heavy ion irradiation, and thus needs to be understood. Stainless steel is the typical structural material used in reactor core, and could be taken as an example to study the inhomogeneous defect depth distribution in heavy ion irradiation and its influence on the tested irradiation hardening by nano-indentation. In this work, solution annealed stainless steel model alloys are irradiated by 3 MeV Fe{sup 2+} ions at 400 °C to 3 dpa to produce Frank loops that are mainly interstitial in nature. The silicon content of the model alloys is also tuned to change point defect diffusion, so that the loop depth distribution influenced by diffusion along the irradiation beam direction could be discussed. Results show that in low Si (0% Si) and base Si (0.42% Si) samples the depth distribution of Frank loop density quite well matches the dpa profile calculated by the SRIM code, but in high Si sample (0.95% Si), the loop number density in the near-surface region is very low. One possible explanation could be Si’s role in enhancing the effective vacancy diffusivity, promoting recombination and thus suppressing interstitial Frank loops, especially in the near-surface region, where vacancies concentrate. By considering the loop depth distribution, the tested irradiation hardening is successfully explained by the Orowan model. A hardening coefficient of around 0.30 is obtained for all the three samples. This attempt in interpreting hardening results may make it easier to compare the mechanical degradation between different irradiation experiments.

  1. Modulation of the Cardiomyocyte Contraction inside a Hydrostatic Pressure Bioreactor: In Vitro Verification of the Frank-Starling Law

    Directory of Open Access Journals (Sweden)

    Lorenzo Fassina

    2015-01-01

    Full Text Available We have studied beating mouse cardiac syncytia in vitro in order to assess the inotropic, ergotropic, and chronotropic effects of both increasing and decreasing hydrostatic pressures. In particular, we have performed an image processing analysis to evaluate the kinematics and the dynamics of those pressure-loaded beating syncytia starting from the video registration of their contraction movement. By this analysis, we have verified the Frank-Starling law of the heart in in vitro beating cardiac syncytia and we have obtained their geometrical-functional classification.

  2. Photography in the boundaries of the visible. From Santiago Ramón y Cajal to Cecil Frank Powell

    Directory of Open Access Journals (Sweden)

    Francisco López-Cantos

    2016-12-01

    Full Text Available In this article, we analyze the use of photographic technologies of two renowned researchers whose investigation results would have been impossible to carry out, as occurs in Galileo a few centuries before with the use of imaging techniques, without the use of photography: Santiago Ramón y Cajal and Cecil Frank Powell, Nobel Prize winners in medicine in 1906 and in physics in 1950, respectively. These researchers were selected, first, because of their close relation with photography and, second, to clearly illustrate the gradual transgression of scientific photographic representation starting in the late nineteenth century from the visible to the invisible.

  3. Frank País García’s Impact On His Generation And The Legacy For New Generations

    Directory of Open Access Journals (Sweden)

    Maricel Coloma-Rizo

    2016-12-01

    Full Text Available Frank País García raises as a symbol of Santiago de Cuba. his revolutionary labor allows him to trascend as a national historical figure with a great impact on his generation. This paper relays on referencies and testimonies of some of País García’s contemporary people. Although he died Young, he left Deep ethic conceptions beneath his revolutionary work: modesty, sensibility, courage, education, a firm carácter, great sense of discipline and organization; all cualities that new generations should assume.

  4. William Franke, Sulla verità poetica che è superiore alla Storia: Porfirio e la critica filosofica della letteratura William Franke, On the Poetic Truth that is Higher than History: Porphyry and the Philosophical Interpretation of Literature

    Directory of Open Access Journals (Sweden)

    Laura Lucia Rossi

    2010-06-01

    Full Text Available

    In this article we propose the translation of William Franke’s paper On the Poetic Truth that is Higher than History: Porphyry and the Philosophical Criticism of Literature, in which the American scholar presents the hermeneutic method of the ancient commentators of Homer, with particular reference to the critic practice applied by the Neoplatonic Porphyry in his De Antro Nympharum. With this treatment Franke proposes and hopes for the return to an interpretive method, called philosophical or speculative, also for contemporary criticism.

    In questo articolo è presentata la traduzione del saggio di William Franke Sulla verità poetica che è superiore alla Storia: Porfirio e la critica filosofica della letteratura, in cui lo studioso americano presenta il metodo ermeneutico degli antichi commentatori di Omero, con particolare riferimento alla critica praticata dal neoplatonico Porfirio, proponendo e auspicando il ritorno ad una modalità interpretativa, detta filosofica o speculativa, anche per la critica contemporanea.

  5. Lead poisoning

    Energy Technology Data Exchange (ETDEWEB)

    Beijers, J A

    1952-01-01

    Three cases of acute lead poisoning of cattle herds via ingestion are reported, and reference is made to several other incidents of lead in both humans and animals. The quantity of lead which was found in the livers of the dead cows varied from 6.5 to 19 mg/kg, while 1160 mg/kg of lead in the liver was found for a young cow which was poisoned experimentally with 5 gms of lead acetate per day; hence, there appears to be great variability in the amounts deposited that can lead to intoxication and death. No evidence was found for a lead seam around the teeth, prophyrinuria, or basophil granules in the erythrocytes during acute or chronic lead poisoning of cattle or horses examined. Reference is made to attempts of finding the boundary line between increased lead absorption and lead intoxication in humans, and an examination of 60 laborers in an offset-printing office containing a great deal of inhalable lead (0.16 to 1.9 mg/cu m air) is reviewed. Physical deviation, basophylic granulation of erythrocytes, increased lead content of the urine, and porphyrinuria only indicate an increased absorption of lead; the use of the term intoxication is justified if, in addition, there are complaints of lack of appetite, constipation, fatigue, abdominal pain, and emaciation.

  6. Lead Toxicity

    Science.gov (United States)

    ... o Do not use glazed ceramics, home remedies, cosmetics, or leaded-crystal glassware unless you know that they are lead safe. o If you live near an industry, mine, or waste site that may have contaminated ...

  7. Early educator-supervised student rocketry: The galcit rocket research project, 1936-1939. A tribute to Frank J. Malina

    Science.gov (United States)

    James, George S.; Winter, Frank H.

    Dr. Frank J. Malina, (1912-1981) is best known to members of the International Astronautical Federation and the International Academy of Astronautics for his deep commitment to, and active involvement in, both organizations; to his associates at UNESCO for his leadership in organizing the UNESCO Division of Scientific Research; to members of the art world for his kinetic paintings and editorship of the journal Leonardo; and to aerospace historians for his co-founding, with Dr. Theodore von Karman (1881-1963), of the Jet Propulsion Laboratory with its World War II development of rocket takeoff assist units for aircraft and, after WWII, America's first production sounding rocket, the WAC Corporal. However, Frank Malina has received little recognition from aerospace educators for his equally pioneering efforts on their behalf. This paper highlights Dr. Malina's efforts not only as an early participant in educator-supported student rocketry but also in helping establishing some of the guiding principles of this field of science motivation. As Dr. Malina noted in 1968, upon becoming one of the founding members of the Supervision of Youth Research Experiments (SYRE) subcommittee of the IAF's Education Committee, the fundamental safety and educational ground rules of: (A) qualified supervision, (B) proper safety facilities, and (C) professionally designed equipment, conceived almost fifty years ago, are equally valid to today's supervised youth rocketry space-related experiment educational programs.

  8. Mechanoelectric feedback does not contribute to the Frank-Starling relation in the rat and guinea pig heart

    Directory of Open Access Journals (Sweden)

    D Kelly

    2014-12-01

    Full Text Available Mechanoelectric feedback (MEF is the process by which mechanical forces on the myocardium can alter its electrical properties. The effect can be large enough to induce ectopic beats or fibrillation. However, the role of MEF at physiological levels of mechanical stress is not clear. We have investigated alteration in action potential morphology in rat and guinea pig ventricle and in rat atrial tissue at levels of stretch near the plateau of the Frank-Starling curve. Stretch of >100 mm.Hg End Diastolic Left Ventricular Pressure (EDLVP or rapidly applied stretch (EDLVP increased by 25 mm.Hg within 100 ms often triggered ectopic beats in isolated rat and guinea-pig hearts. However, ventricular epicardial monophasic action potentials (MAPs recorded during stretch to EDLVP up to 30 mm. Hg showed no consistent changes in action potential duration (at APD20, APD50 or APD80 in either species. MAP recording detected APD prolongation with very small concentrations of 4-AP (10 μM, confirming the discrimination of the recording technique. In isolated rat atrial strips, no changes in intracellular action potential morphology or membrane potential were seen when stretched to levels producing an optimum increase in contractility. We conclude that alteration in action potential morphology with stretch does not contribute to the Frank-Starling relation in ventricle of rat or guinea-pig isolated heart, or in rat atrial tissue.

  9. Relational Leading

    DEFF Research Database (Denmark)

    Larsen, Mette Vinther; Rasmussen, Jørgen Gulddahl

    2015-01-01

    This first chapter presents the exploratory and curious approach to leading as relational processes – an approach that pervades the entire book. We explore leading from a perspective that emphasises the unpredictable challenges and triviality of everyday life, which we consider an interesting......, relevant and realistic way to examine leading. The chapter brings up a number of concepts and contexts as formulated by researchers within the field, and in this way seeks to construct a first understanding of relational leading....

  10. Lead Test

    Science.gov (United States)

    ... to do renovation and repair projects using lead-safe work practices to avoid creating more lead dust or ... in a dangerous area? Yes. If you are working in a potentially harmful environment with exposure to lead dust or fumes: Wash ...

  11. Study and application of the balloon frame system to the industrialization of housing: the case of the American System-Built Houses of Frank Lloyd Wright

    Directory of Open Access Journals (Sweden)

    B. Serra Soriano

    2017-06-01

    Full Text Available Within his large architectural production, Frank Lloyd Wright had the opportunity to experiment with the timber industrialization, linking a traditional material with the modern sense of architecture. Wood and Frank Lloyd Wright are inseparable from the balloon frame system, a system which he will use at his first housing and through which he will materialize the spatial decomposition concept. The research on the particular American System-Built Houses case will serve to show the earliest experiences of Wright with the industry, whose conclusions he would use for subsequent researches on prefabrication.

  12. Edgar Frank Codd e o Banco de Dados Relacional: uma contribuição para a História da Computação

    OpenAIRE

    Souza, Odécio

    2015-01-01

    No presente ensaio, pretendemos analisar a participação de Edgar Frank Ted Codd na organização das bases teóricas que permitiram a criação do "Objeto Tecnológico" conhecido como "Sistema Gerenciador de Banco de Dados Relacional", oferecendo assim uma contribuição para a História da Computação In this essay, we intend to analyze the participation of Edgar Frank "Ted" Codd in the organization of the theoretical foundations that allowed the creation of the "Technologica...

  13. Leading Democratically

    Science.gov (United States)

    Brookfield, Stephen

    2010-01-01

    Democracy is the most venerated of American ideas, the one for which wars are fought and people die. So most people would probably agree that leaders should be able to lead well in a democratic society. Yet, genuinely democratic leadership is a relative rarity. Leading democratically means viewing leadership as a function or process, rather than…

  14. Frank Robert Tangherlini — the Founder of an Alternative Relativistic Kinematics (On the Occasion of His 85th Birthday

    Directory of Open Access Journals (Sweden)

    Malykin G. B.

    2009-01-01

    Full Text Available Already fifty years ago, Frank Robert Tangherlini, an American theoretical physicist, suggested an original procedure which, targeting the synchronization of clocks located in two different inertial reference frames of the space, was di erent from that Einstein had introduced. As a result of these, Tangherlini had deduced the so-called the Tangher- lini transformations, which are a sort of the transformations of the spatial coordinates and time being moved from one inertial reference frame into another one. The Tangher- lini transformations differ from the Lorentz transformations (which can be meant clas- sic ones in the theory of relativity and, in particular, suggest the velocity of light to be anisotropic in a moving inertial reference frame. The Tangherlini transformations be- ing applied provide adequate explanations to all well-known interference experiments checking of the Special Theory of Relativity.

  15. Leading change.

    Science.gov (United States)

    2017-02-27

    In response to feedback from nursing, midwifery and other care staff who wanted to understand better how the Leading Change, Adding Value framework applies to them, NHS England has updated its webpage to include practice examples.

  16. On Teaching International Courses on Health Information Systems Lessons Learned during 16 Years of Frank - van Swieten Lectures on Strategic Information Management in Health Information Systems

    NARCIS (Netherlands)

    Ammenwerth, Elske; Knaup, Petra; Winter, Alfred; Bauer, Axel W.; Bott, Oliver J.; Gietzelt, Matthias; Haarbrandt, Birger; Hackl, Werner O.; Hellrung, Nils; Huebner-Bloder, Gudrun; Jahn, Franziska; Jaspers, Monique W.; Kutscha, Ulrike; Machan, Christoph; Oppermann, Bianca; Pilz, Jochen; Schwartze, Jonas; Seidel, Christoph; Slot, Jan-Eric; Smers, Stefan; Spitalewsky, Katharina; Steckel, Nathalie; Struebing, Alexander; van der Haak, Minne; Haux, Reinhold; ter Burg, Willem J.

    2017-01-01

    Background: Health information systems (HIS) are one of the most important areas for biomedical and health informatics. In order to professionally deal with HIS well-educated informaticians are needed. Because of these reasons, in 2001 an international course has been established: The Frank - van

  17. The Last Word: An Interview with Frank Pajares--God, the Devil, William James, the Little Prince, and Self-Efficacy

    Science.gov (United States)

    Bembenutty, Hefer

    2007-01-01

    This article presents an interview with Frank Pajares, an internationally recognized scholar in the field of motivation and self-efficacy. During the interview, Pajares talked about William James, what he learned from reading "The Little Prince," his self-efficacy beliefs, and his famous speech wherein he spoke of God, the Devil, and solving the…

  18. Reply in response to comment by E. W. Hones. [concerning the paper, on hot tenuous plasmas, fireballs, and boundary layers in the earth's magnetotail by Frank, et al.

    Science.gov (United States)

    Frank, L. A.; Decoster, R. J.; Ackerson, K. L.

    1977-01-01

    Hones 1977 points out the marked disagreement between the plasma flow measurements reported by Frank et al. 1976 and those obtained with the LASL plasma analyzer. He suggests (1) that solar ultraviolet background rates may have been incorrectly accounted for in the computation of proton bulk flows in the magnetotail as reported by Frank et al. 1976 and (2) that bulk flows with substantial speeds, i.e., those speeds greater than 50 km per sec, are seldom encountered in the plasma sheet at geocentric radial distances approx. equal to 35 R sub E. It is demonstrated that such ultraviolet responses were carefully considered by Frank et al. 1976 and thus the conclusion is maintained that bulk flows greater than 50 km per sec frequently occur in the plasma sheet at these radial distances. Further, a direct comparison of the capabilities of the LASL plasma analyzer employed by Hones and of the LEPEDEA Frank et al., 1976 indicates that there are rather severe restrictions on which plasmas in the plasma sheet can be properly measured to gain proton temperatures, number densities and flow velocities with the LASL plasma analyzer.

  19. Asociación entre plomo en sangre y parámetros sociodemográficos en población infantil Association between blood lead and sociodemographic parameters among children

    Directory of Open Access Journals (Sweden)

    Maritza Rojas

    2003-08-01

    Full Text Available OBJETIVO: Establecer la relación entre concentración de plomo en sangre (Pb-S y parámetros demográficos y socioeconómicos, en una población infantil. METODOS: Se estableció la relación entre la concentración de plomo en sangre (Pb-S, de 243 niños (promedio de edad 5,94±2,78 años, que asistieron al Centro de Investigaciones Toxicológicas de la Universidad de Carabobo (CITUC, Venezuela (periodo 1998-2000. Se utilizó tecnología de Sistemas Geográficos de Información (SGI, ubicando espacialmente a los niños, asociando de forma gráfica la procedencia de éstos con los resultados analíticos. RESULTADOS: El promedio de Pb-S de la población total (11,62 ug/dl, fue significativamente superior al límite permisible (CDC=10 ug/dl. El número de niños con valores superiores al límite permisible de Pb-S (VSLP [150; 61,7%], fue significativamente alto (pOBJECTIVE: To determine the relationship between blood lead concentration (Pb-S, and sociodemographic parameters among children. METHODS: Blood lead concentration (Pb-S was determined in 243 children (aged 5.94±2.78 years in the district of Valencia. The required analysis was performed at the Center for Toxicological Investigations of University of Carabobo (CITUC, Venezuela, between January 1st, 1998 to December 31st, 2000. Geographical Information Systems (GIS technology was used for data mapping. RESULTS: Average Pb-S (11.62 ug/dl was significantly higher than the allowed levels. One hundred and fifty (61.7% children had Pb-S levels above the allowed concentration (VSLP and this amount was significantly high in relation to the total number of subjects studied. The logistic regression analysis showed a significant association of sectors 12 (status A and 16 and 28 (status C with VSLP (R=0.1189; p<0,01; R=0.1202, p<0,01 and R=0.1189; p<0.01, respectively. Odds ratio showed that children from status C are 7,286 times more likely to have Pb-S VSLP than those from A or B. CONCLUSIONS: This

  20. Ecotoxicology: Lead

    Science.gov (United States)

    Scheuhammer, A.M.; Beyer, W.N.; Schmitt, C.J.; Jorgensen, Sven Erik; Fath, Brian D.

    2008-01-01

    Lead (Pb) is a naturally occurring metallic element; trace concentrations are found in all environmental media and in all living things. However, certain human activities, especially base metal mining and smelting; combustion of leaded gasoline; the use of Pb in hunting, target shooting, and recreational angling; the use of Pb-based paints; and the uncontrolled disposal of Pb-containing products such as old vehicle batteries and electronic devices have resulted in increased environmental levels of Pb, and have created risks for Pb exposure and toxicity in invertebrates, fish, and wildlife in some ecosystems.

  1. Leading men

    DEFF Research Database (Denmark)

    Bekker-Nielsen, Tønnes

    2016-01-01

    Through a systematic comparison of c. 50 careers leading to the koinarchate or high priesthood of Asia, Bithynia, Galatia, Lycia, Macedonia and coastal Pontus, as described in funeral or honorary inscriptions of individual koinarchs, it is possible to identify common denominators but also disting...

  2. The 'pay ratio' provision of the Dodd-Frank Act 2010 and presentation of the Paulo–Le Roux Index

    Directory of Open Access Journals (Sweden)

    Stanley Paulo

    2016-08-01

    Full Text Available Orientation: This article addresses the issues of executive remuneration and whether it was excessive or not. Research purpose: On 05 August 2015, the US Securities and Exchange Commission (SEC adopted a rule to operationalise Section 953(b of the Dodd-Frank Wall Street Reform and Consumer Protection Act 2010 (Dodd-Frank or the Dodd-Frank Act 2010, the ‘pay ratio provision’, as part of a process to ensure sound corporate governance and shed light on assertions that corporate executive remuneration was excessive and detrimental to the economic wellbeing of the USA. This pay ratio rule will be operative starting from 2017 and requires public firms to publish the ratio of chief executive officer (CEO remuneration to the median remuneration of all its employees. Hence, it is a measure of income distribution. It does not reveal the relationship between executive compensation and the value added to the firm by executives. In anticipation of this rule becoming mandatory and as part of a quest to quantify the value of executives to the firm, Paulo and Le Roux (2014 developed an approach to measure the value executives add to the firm, drawing from audited financial statements and thereby demonstrating that the value added by executive management could be measured according to the requirements of sound research methodology and rigorous epistemology. Motivation for the study: Statutory enactment of the pay ratio provision provided the impetus to create an index, the Paulo–Le Roux Index, that shows how much executives are paid in relation to how much value they add to the firm. Research design, approach and method: Paulo and Le Roux (2014 developed an approach to measure the value executives add to the firm, drawing from audited financial statements and thereby demonstrating that the value added by executive management could be measured according to the requirements of sound research methodology and rigorous epistemology. Statutory enactment of the

  3. Who Leads China's Leading Universities?

    Science.gov (United States)

    Huang, Futao

    2017-01-01

    This study attempts to identify the major characteristics of two different groups of institutional leaders in China's leading universities. The study begins with a review of relevant literature and theory. Then, there is a brief introduction to the selection of party secretaries, deputy secretaries, presidents and vice presidents in leading…

  4. Narrative empathy and illness memoirs: Arthur Frank's At the Will of the Body and Kathlyn Conway's Ordinary Life.

    Science.gov (United States)

    Baena, Rosalia

    2017-09-01

    This article analyses the concept of narrative empathy in illness memoirs. These texts negotiate the narrative identity of an autobiographer as he or she recounts the disruptive experience of illness, an experience in which physical and emotional traces dramatically and definitively shape our sense of self. While narrative emotions are certainly deployed in these autobiographies in order to connect with the readers and promote social change, this empathic connection is not so much aimed at arousing compassion but rather more positive emotions on the experience of illness. I will explore the emotional representations of cancer in Arthur Frank's At the Will of the Body (1991) and Kathlyn Conway's Ordinary Life: A Memoir of Illness (1997), focusing on the identity strategies these authors use in order to become affirmative models of disability and illness, showing the damaging effects not of disease or impairment but, rather, of the cultural mythologies that interpret those conditions in reductive or disparaging ways. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  5. Effect of volume loading on the Frank-Starling relation during reductions in central blood volume in heat-stressed humans

    DEFF Research Database (Denmark)

    Bundgaard-Nielsen, Morten; Wilson, T E; Seifert, Thomas

    2010-01-01

    During reductions in central blood volume while heat stressed, a greater decrease in stroke volume (SV) for a similar decrease in ventricular filling pressure, compared to normothermia, suggests that the heart is operating on a steeper portion of a Frank-Starling curve. If so, volume loading...... of heat-stressed individuals would shift the operating point to a flatter portion of the heat stress Frank-Starling curve thereby attenuating the reduction in SV during subsequent decreases in central blood volume. To investigate this hypothesis, right heart catheterization was performed in eight males...... from whom pulmonary capillary wedge pressure (PCWP), central venous pressure and SV (via thermodilution) were obtained while central blood volume was reduced via lower-body negative pressure (LBNP) during normothermia, whole-body heating (increase in blood temperature 1 degrees C), and during whole...

  6. Parameter Estimation

    DEFF Research Database (Denmark)

    Sales-Cruz, Mauricio; Heitzig, Martina; Cameron, Ian

    2011-01-01

    of optimisation techniques coupled with dynamic solution of the underlying model. Linear and nonlinear approaches to parameter estimation are investigated. There is also the application of maximum likelihood principles in the estimation of parameters, as well as the use of orthogonal collocation to generate a set......In this chapter the importance of parameter estimation in model development is illustrated through various applications related to reaction systems. In particular, rate constants in a reaction system are obtained through parameter estimation methods. These approaches often require the application...... of algebraic equations as the basis for parameter estimation.These approaches are illustrated using estimations of kinetic constants from reaction system models....

  7. USARSKI, Frank. O Budismo e as outras: Encontros e desencontros entre as grandes religiões mundiais. Aparecida: Ideias & Letras, 2009. 304p. ISBN 978-85-7698-053-7

    Directory of Open Access Journals (Sweden)

    Elisangela Marina de Freitas e Silva

    2012-01-01

    Full Text Available Resenha do livro USARSKI, Frank. O Budismo e as outras: Encontros e desencontros entre as grandes religiões mundiais. Aparecida: Ideias & Letras, 2009. 304p.ISBN 978-85-7698-053-7

  8. A Note on the Effect of Wind Waves on Vertical Mixing in Franks Tract, Sacramento–San Joaquin Delta, California

    Directory of Open Access Journals (Sweden)

    Nicole L. Jones

    2008-06-01

    Full Text Available A one-dimensional numerical model that simulates the effects of whitecapping waves was used to investigate the importance of whitecapping waves to vertical mixing at a 3-meter-deep site in Franks Tract in the Sacramento-San Joaquin Delta over an 11-day period. Locally-generated waves of mean period approximately 2 s were generated under strong wind conditions; significant wave heights ranged from 0 to 0.3 m. A surface turbulent kinetic energy flux was used to model whitecapping waves during periods when wind speeds > 5 m s-1 (62% of observations. The surface was modeled as a wind stress log-layer for the remaining 38% of the observations. The model results demonstrated that under moderate wind conditions (5–8 m s-1 at 10 m above water level, and hence moderate wave heights, whitecapping waves provided the dominant source of turbulent kinetic energy to only the top 10% of the water column. Under stronger wind (> 8 m s-1, and hence larger wave conditions, whitecapping waves provided the dominant source of turbulent kinetic energy over a larger portion of the water column; however, this region extended to the bottom half of the water column for only 7% of the observation period. The model results indicated that phytoplankton concentrations close to the bed were unlikely to be affected by the whitecapping of waves, and that the formation of concentration boundary layers due to benthic grazing was unlikely to be disrupted by whitecapping waves. Furthermore, vertical mixing of suspended sediment was unlikely to be affected by whitecapping waves under the conditions experienced during the 11-day experiment. Instead, the bed stress provided by tidal currents was the dominant source of turbulent kinetic energy over the bottom half of the water column for the majority of the 11-day period.

  9. Inventory parameters

    CERN Document Server

    Sharma, Sanjay

    2017-01-01

    This book provides a detailed overview of various parameters/factors involved in inventory analysis. It especially focuses on the assessment and modeling of basic inventory parameters, namely demand, procurement cost, cycle time, ordering cost, inventory carrying cost, inventory stock, stock out level, and stock out cost. In the context of economic lot size, it provides equations related to the optimum values. It also discusses why the optimum lot size and optimum total relevant cost are considered to be key decision variables, and uses numerous examples to explain each of these inventory parameters separately. Lastly, it provides detailed information on parameter estimation for different sectors/products. Written in a simple and lucid style, it offers a valuable resource for a broad readership, especially Master of Business Administration (MBA) students.

  10. New Times, New Heroes : Ambiguity, Socio-Political Issues and Post Modernism in Frank Miller's Graphic Novel The Dark Knight Returns

    OpenAIRE

    Axelsson, Jan

    2013-01-01

    Frank Miller’s The Dark Knight Returns is one of the first graphic novels to redraw the map for this kind of literature but perhaps first and foremost for the characteristics of superheroes and villains. It is a story which we have read before in the sense that Batman, the eternal crime fighter, chases his arch enemies Two Face and the Joker, but it is also a new story in which we meet an ambiguous and complex superhero. Batman has become an old man tormented by his past, in which his side ki...

  11. The role of the Frank-Starling law in the transduction of cellular work to whole organ pump function: a computational modeling analysis.

    Directory of Open Access Journals (Sweden)

    Steven A Niederer

    2009-04-01

    Full Text Available We have developed a multi-scale biophysical electromechanics model of the rat left ventricle at room temperature. This model has been applied to investigate the relative roles of cellular scale length dependent regulators of tension generation on the transduction of work from the cell to whole organ pump function. Specifically, the role of the length dependent Ca(2+ sensitivity of tension (Ca(50, filament overlap tension dependence, velocity dependence of tension, and tension dependent binding of Ca(2+ to Troponin C on metrics of efficient transduction of work and stress and strain homogeneity were predicted by performing simulations in the absence of each of these feedback mechanisms. The length dependent Ca(50 and the filament overlap, which make up the Frank-Starling Law, were found to be the two dominant regulators of the efficient transduction of work. Analyzing the fiber velocity field in the absence of the Frank-Starling mechanisms showed that the decreased efficiency in the transduction of work in the absence of filament overlap effects was caused by increased post systolic shortening, whereas the decreased efficiency in the absence of length dependent Ca(50 was caused by an inversion in the regional distribution of strain.

  12. Substorm processes in the magnetotail - Comments on 'On hot tenuous plasmas, fireballs, and boundary layers in the earth's magnetotail' by L. A. Frank, K. L. Ackerson, and R. P. Lepping

    Science.gov (United States)

    Hones, E. W., Jr.

    1977-01-01

    Various theories regarding the magnetotail are reviewed and discussed. These include the work of Dungey (1961) and Eastman et al., (1976) regarding the generation of the magnetotail, Frank et al., (1976) concerning the so-called magnetotail fireball and its characteristics, and Hones et al., (1976 and 1976a) on the formation of a neutral line across the near-earth plasma sheet near the substorm onset. A detailed discussion of a fireball encounter during 0900-1400 UT in April 1974 is presented, noting plasma and magnetic phenomena observed, and magnetic records from the earth. A critique is made by Hones of the interpretation of this fireball made by Frank et al. In an accompanying reply, Frank et al. comment on the observations made by Hones, with attention to the most evident discrepancy between the two theories, i.e., the generation of large closed magnetic loops in the plasma sheet during magnetic substorms.

  13. Bomb parameters

    International Nuclear Information System (INIS)

    Kerr, George D.; Young, Rebert W.; Cullings, Harry M.; Christry, Robert F.

    2005-01-01

    The reconstruction of neutron and gamma-ray doses at Hiroshima and Nagasaki begins with a determination of the parameters describing the explosion. The calculations of the air transported radiation fields and survivor doses from the Hiroshima and Nagasaki bombs require knowledge of a variety of parameters related to the explosions. These various parameters include the heading of the bomber when the bomb was released, the epicenters of the explosions, the bomb yields, and the tilt of the bombs at time of explosion. The epicenter of a bomb is the explosion point in air that is specified in terms of a burst height and a hypocenter (or the point on the ground directly below the epicenter of the explosion). The current reassessment refines the energy yield and burst height for the Hiroshima bomb, as well as the locations of the Hiroshima and Nagasaki hypocenters on the modern city maps used in the analysis of the activation data for neutrons and TLD data for gamma rays. (J.P.N.)

  14. The critical role of cognitive-based trait differences in transcranial direct current stimulation (tDCS) suppression of food craving and eating in frank obesity.

    Science.gov (United States)

    Ray, Mary Katherine; Sylvester, Maria D; Osborn, Lauren; Helms, Joel; Turan, Bulent; Burgess, Emilee E; Boggiano, Mary M

    2017-09-01

    Obesity remains a major public health concern and novel treatments are needed. Transcranial direct current stimulation (tDCS) is a neuromodulation technique shown to reduce food craving and consumption, especially when targeting the dorsolateral prefrontal cortex (DLPFC) with a right anode/left cathode electrode montage. Despite the implications to treat frank (non-bingeeating) obesity, no study has tested the right anode/left cathode montage in this population. Additionally, most tDCS appetite studies have not controlled for differences in traits under DLPFC control that may influence how well one responds to tDCS. Hence, N = 18 (10F/8M) adults with frank obesity completed the Dutch Eating Behavior Questionnaire-Restraint and Barratt Impulsiveness Scale, and received 20 min of 2 mA active tDCS and control tDCS session. Craving and eating was assessed at both sessions with a food photo "wanting" test and in-lab measures of total, preferred, and less-preferred kilocalories consumed of three highly palatable snack foods. While main effects of tDCS vs. control were not found, significant differences emerged when trait scores were controlled. tDCS reduced food craving in females with lower attention-type impulsiveness (p = 0.047), reduced preferred-food consumption in males with lower intent to restrict calories (p = 0.024), and reduced total food consumption in males with higher non-planning-type impulsiveness (p = 0.009) compared to control tDCS. This is the first study to find significant reductions in food craving and consumption in a sample with frank obesity using the most popular tDCS montage in appetite studies. The results also highlight the cognitive-based heterogeneity of individuals with obesity and the importance of considering these differences when evaluating the efficacy of DLPFC-targeted tDCS in future studies aimed at treating obesity. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Lead levels - blood

    Science.gov (United States)

    Blood lead levels ... is used to screen people at risk for lead poisoning. This may include industrial workers and children ... also used to measure how well treatment for lead poisoning is working. Lead is common in the ...

  16. Lead Poisoning Prevention Tips

    Science.gov (United States)

    ... or removed safely. How are children exposed to lead? Lead-based paint and lead contaminated dust are ... What can be done to prevent exposure to lead? It is important to determine the construction year ...

  17. The Politics of Genre and Medium apropos of Frank O’Hara’s “On Seeing Larry Rivers’s Washington Crossing the Delaware (1955)

    DEFF Research Database (Denmark)

    Balle, Søren Hattesen

    Frank O’Hara’s ekphrastic poem “On Seeing Larry Rivers’s Washington Crossing the Delaware” is only one work among others in a series of 1950s works in different genres and media relating to Emanuel Leutze’s romantic representation of the father of the American nation in his painting Washington...... event in American history. Inversely, only few critics take seriously the difference in both genre and medium between these different textual and graphic representations of Washington’s crossing and the questions such a difference may give rise to. In this paper I shall make an intergeneric......) and by narrativizing Rivers’s painting, the poem opens up alternative representational possibilities of the former and thus poses the question of whose ‘truth’ gets told or not told depending on the choice of genre and medium in representation. Thus, the intertextual relationship existing between Rivers’s painting...

  18. The cross-bridge dynamics is determined by two length-independent kinetics: Implications on muscle economy and Frank-Starling Law.

    Science.gov (United States)

    Amiad Pavlov, Daria; Landesberg, Amir

    2016-01-01

    The cellular mechanisms underlying the Frank-Starling Law of the heart and the skeletal muscle force-length relationship are not clear. This study tested the effects of sarcomere length (SL) on the average force per cross-bridge and on the rate of cross-bridge cycling in intact rat cardiac trabeculae (n=9). SL was measured by laser diffraction and controlled with a fast servomotor to produce varying initial SLs. Tetanic contractions were induced by addition of cyclopiazonic acid, to maintain a constant activation. Stress decline and redevelopment in response to identical ramp shortenings, starting at various initial SLs, was analyzed. Both stress decline and redevelopment responses revealed two distinct kinetics: a fast and a slower phase. The duration of the rapid phases (4.2 ± 0.1 msec) was SL-independent. The second slower phase depicted a linear dependence of the rate of stress change on the instantaneous stress level. Identical slopes (70.5 ± 1.6 [1/s], p=0.33) were obtained during ramp shortening at all initial SLs, indicating that the force per cross-bridge and cross-bridge cycling kinetics are length-independent. A decrease in the slope at longer SLs was obtained during stress redevelopment, due to internal shortening. The first phase is attributed to rapid changes in the average force per cross-bridge. The second phase is ascribed to both cross-bridge cycling between its strong and weak conformations and to changes in the number of strong cross-bridges. Cross-bridge cycling kinetics and muscle economy are length-independent and the Frank-Starling Law cannot be attributed to changes in the force per cross-bridge or in the single cross-bridge cycling rates. Copyright © 2015 Elsevier Ltd. All rights reserved.

  19. Identification of two novel SH3PXD2B gene mutations in Frank-Ter Haar syndrome by exome sequencing: Case report and review of the literature.

    Science.gov (United States)

    Zrhidri, Abdelali; Jaouad, Imane Cherkaoui; Lyahyai, Jaber; Raymond, Laure; Egéa, Grégory; Taoudi, Mohamed; El Mouatassim, Said; Sefiani, Abdelaziz

    2017-09-10

    Frank-Ter Haar syndrome (FTHS) is an autosomal-recessive disorder characterized by skeletal, cardio-vascular, and eye abnormalities, such as increased intraocular pressure, prominent eyes, and hypertelorism. The most common underlying genetic defect in Frank-Ter Haar syndrome appears to be due to mutations in the SH3PXD2B gene on chromosome 5q35.1. Until now, only six mutations in SH3PXD2B gene have been identified. A genetic heterogeneity of FTHS was suggested in previous studies. FTHS was suspected clinically in a girl of 2years old, born from non-consanguineous Moroccan healthy parents. The patient had been referred to a medical genetics outpatient clinic for dysmorphic facial features. Whole Exome Sequencing (WES) was performed in the patient and her parents, in addition to Sanger sequencing that was carried out to confirm the results. We report the first description of a Moroccan FTHS patient with two novel compound heterozygous mutations c.806G>A; p.Trp269* (maternal allele) and c.892delC; p.Asp299Thrfs*44 (paternal allele) in the SH3PXD2B gene. Sanger sequencing confirmed this mutation in the affected girl and demonstrated that her parents carry this mutation in heterozygous state. Our results confirm the clinical diagnosis of FTHS in this reported family and contribute to expand the mutational spectrum of this rare disease. Our study shows also, that exome sequencing is a powerful and a cost-effective tool for the diagnosis of a supposed genetically heterogeneous disorder such FTHS. Copyright © 2017 Elsevier B.V. All rights reserved.

  20. Lead diffusion in monazite

    International Nuclear Information System (INIS)

    Gardes, E.

    2006-06-01

    Proper knowledge of the diffusion rates of lead in monazite is necessary to understand the U-Th-Pb age anomalies of this mineral, which is one of the most used in geochronology after zircon. Diffusion experiments were performed in NdPO 4 monocrystals and in Nd 0.66 Ca 0.17 Th 0.17 PO 4 polycrystals from Nd 0.66 Pb 0.17 Th 0.17 PO 4 thin films to investigate Pb 2+ + Th 4+ ↔ 2 Nd 3+ and Pb 2+ ↔ Ca 2+ exchanges. Diffusion annealings were run between 1200 and 1500 Celsius degrees, at room pressure, for durations ranging from one hour to one month. The diffusion profiles were analysed using TEM (transmission electronic microscopy) and RBS (Rutherford backscattering spectroscopy). The diffusivities extracted for Pb 2+ + Th 4+ ↔ 2 Nd 3+ exchange follow an Arrhenius law with parameters E equals 509 ± 24 kJ mol -1 and log(D 0 (m 2 s -1 )) equals -3.41 ± 0.77. Preliminary data for Pb 2+ ↔ Ca 2+ exchange are in agreement with this result. The extrapolation of our data to crustal temperatures yields very slow diffusivities. For instance, the time necessary for a 50 μm grain to lose all of its lead at 800 Celsius degrees is greater than the age of the Earth. From these results and other evidence from the literature, we conclude that most of the perturbations in U-Th-Pb ages of monazite cannot be attributed to lead diffusion, but rather to interactions with fluids. (author)

  1. Kinetics of oil saponification by lead salts in ancient preparations of pharmaceutical lead plasters and painting lead mediums.

    Science.gov (United States)

    Cotte, M; Checroun, E; Susini, J; Dumas, P; Tchoreloff, P; Besnard, M; Walter, Ph

    2006-12-15

    Lead soaps can be found in archaeological cosmetics as well as in oil paintings, as product of interactions of lead salts with oil. In this context, a better understanding of the formation of lead soaps allows a follow-up of the historical evolution of preparation recipes and provides new insights into conservation conditions. First, ancient recipes of both pharmaceutical lead plasters and painting lead mediums, mixtures of oil and lead salts, were reconstructed. The ester saponification by lead salts is determined by the preparation parameters which were quantified by FT-IR spectrometry. In particular, ATR/FT-IR spectrometer was calibrated by the standard addition method to quantitatively follow the kinetics of this reaction. The influence of different parameters such as temperature, presence of water and choice of lead salts was assessed: the saponification is clearly accelerated by water and heating. This analysis provides chemical explanations to the historical evolution of cosmetic and painting preparation recipes.

  2. Physiological parameters

    International Nuclear Information System (INIS)

    Natera, E.S.

    1998-01-01

    The physiological characteristics of man depend on the intake, metabolism and excretion of stable elements from food, water, and air. The physiological behavior of natural radionuclides and radionuclides from nuclear weapons testing and from the utilization of nuclear energy is believed to follow the pattern of stable elements. Hence information on the normal physiological processes occurring in the human body plays an important role in the assessment of the radiation dose received by man. Two important physiological parameters needed for internal dose determination are the pulmonary function and the water balance. In the Coordinated Research Programme on the characterization of Asian population, five participants submitted data on these physiological characteristics - China, India, Japan, Philippines and Viet Nam. During the CRP, data on other pertinent characteristics such as physical and dietary were simultaneously being collected. Hence, the information on the physiological characteristics alone, coming from the five participants were not complete and are probably not sufficient to establish standard values for the Reference Asian Man. Nonetheless, the data collected is a valuable contribution to this research programme

  3. Lead (Pb) Air Pollution

    Science.gov (United States)

    ... Regional Offices Labs and Research Centers Lead (Pb) Air Pollution Contact Us Share As a result of EPA's ... and protect aquatic and terrestrial ecosystems. Lead (Pb) Air Pollution Basic Information How does lead get in the ...

  4. Cryogenic current leads

    Energy Technology Data Exchange (ETDEWEB)

    Zizek, F.

    1982-01-01

    Theoretical, technical and design questions are examined of cryogenic current leads for SP of magnetic systems. Simplified mathematical models are presented for the current leads. To illustrate modeling, the calculation is made of the real current leads for 500 A and three variants of current leads for 1500 A for the enterprise ''Shkoda.''

  5. Lead - nutritional considerations

    Science.gov (United States)

    ... billion people had toxic (poisonous) blood lead levels. Food Sources Lead can be found in canned goods if there is lead solder in the ... to bottled water for drinking and cooking. Avoid canned goods from foreign ... cans goes into effect. If imported wine containers have a lead foil ...

  6. Lead inclusions in aluminium

    International Nuclear Information System (INIS)

    Johnson, E.; Johansen, A.; Sarholt-Kristensen, L.; Andersen, H.H.; Grabaek, L.; Bohr, J.

    1990-01-01

    Ion implantation at room temperature of lead into aluminum leads to spontaneous phase separation and formation of lead precipitates growing topotactically with the matrix. Unlike the highly pressurized (∼ 1-5 GPa) solid inclusions formed after noble gas implantations, the pressure in the lead precipitates is found to be less than 0.12 GPa. Recently the authors have observed the result that the lead inclusions in aluminum exhibit both superheating and supercooling. In this paper they review and elaborate on these results. Small implantation-induced lead precipitates embedded in an aluminum matrix were studied by x-ray diffraction

  7. Factores determinantes de la deserción escolar en el Policlínico Docente "Frank País García" Determinant factors of the school desertion in «Frank País García» Teaching Polyclinic from Santiago de Cuba

    Directory of Open Access Journals (Sweden)

    Nadia Inés Infante Tavío

    2012-04-01

    Full Text Available Se realizó un estudio de tipo investigación en el campo de la educación médica de pregrado a 33 estudiantes del primer año de medicina en el primer semestre del curso 2010-2011 en el Policlínico Docente "Frank País García" de Santiago de Cuba, con vistas a identificar los factores determinantes de la deserción escolar de este período. Para obtener la información, se aplicó un cuestionario a los educandos, avalado por criterios de expertos, y se llevaron a cabo métodos teóricos y empíricos (descritos en el trabajo. Se obtuvo que la deserción escolar fuera elevada y entre sus principales causas estuvieron la insuficiencia docente, el abandono y la falta de orientación vocacional.A study of investigation type was carried out in the field of pregraduate medical education to 33 first year students in the first semester of the course 2010-2011 at "Frank País García" Polyclinic in Santiago de Cuba, with the objective of identifying the determinant factors of the school desertion in this period. To obtain the information, a inquiry was applied to the students, endorsed by experts' criteria, and theoretical and empiric methods (described in the work were carried out. It was obtained that the school desertion was high and among its main causes there were teaching inadequacy, desertion and the lack of vocational guide.

  8. VOLUMETRIC LEAD ASSAY

    International Nuclear Information System (INIS)

    Ebadian, M.A.; Dua, S.K.; Roelant, David; Kumar, Sachin

    2001-01-01

    This report describes a system for handling and radioassay of lead, consisting of a robot, a conveyor, and a gamma spectrometer. The report also presents a cost-benefit analysis of options: radioassay and recycling lead vs. disposal as waste

  9. NA49: lead-lead collision

    CERN Multimedia

    1996-01-01

    This is an image of an actual lead ion collision taken from tracking detectors on the NA49 experiment, part of the heavy ion project at CERN. These collisions produce a very complicated array of hadrons as the heavy ions break up. It is hoped that one of these collisions will eventually create a new state of matter known as quark-gluon plasma.

  10. Uranium-lead systematics

    International Nuclear Information System (INIS)

    Wickman, F.E.

    1983-01-01

    The method of Levchenkov and Shukolyukov for calculating age and time disturbance of minerals without correction for original lead is generalized to include the cases when (1) original lead and radiogenic lead leach differently, and (2) the crystals studied consist of a core and a mantle. It is also shown that a straight line obtained from the solution of the equations is the locus of the isotopic composition of original lead. (Auth.)

  11. Electronic publication of new animal names - An interview with Frank-T. Krell, Commissioner of the International Commission on Zoological Nomenclature and Chair of the ICZN ZooBank Committee

    Science.gov (United States)

    2012-01-01

    On the 4th September 2012 the International Commission on Zoological Nomenclature announced an amendment to the International Code of Zoological Nomenclature allowing for electronic publication of the scientific names of animals. In this interview Frank-T. Krell discusses the implications of this amendment for authors wishing to publish descriptions of newly identified animal species in online and open access journals, and for the future of taxonomic science. PMID:22978411

  12. Atrioventricular Pacemaker Lead Reversal

    Directory of Open Access Journals (Sweden)

    Mehmet K Aktas, MD

    2007-01-01

    Full Text Available During cardiac surgery temporary epicardial atrial and ventricular leads are placed in case cardiac pacing is required postoperatively. We present the first reported series of patients with reversal of atrioventricular electrodes in the temporary pacemaker without any consequent deleterious hemodynamic effect. We review the electrocardiographic findings and discuss the findings that lead to the discovery of atrioventricular lead reversal.

  13. Lead Poisoning (For Parents)

    Science.gov (United States)

    ... Staying Safe Videos for Educators Search English Español Lead Poisoning KidsHealth / For Parents / Lead Poisoning What's in ... Print en español La intoxicación por plomo About Lead Poisoning If you have young kids, it's important ...

  14. A PARODIZAÇÃO DA AÇÃO TRÁGICA EM FRANK PIG SAYS HELLO, DE PATRICK McCABE: DRAMA SOCIAL, VIOLÊNCIA E IRREVERÊNCIA

    Directory of Open Access Journals (Sweden)

    Sandra Luna

    2018-06-01

    Full Text Available Publicado em 1992, The Butcher Boy, celebrado romance de Patrick McCabe, logo foi adaptado para o cinema e para o teatro. Em sua forma dramática, intitulada Frank Pig Says Hello, a peça teatraliza as memórias de infância de Frank Pig, ou Piglet, um “menino-porquinho”. A despeito da dimensão trágica dos conflitos existenciais e sociais que modelam a peça de McCabe, sua dramaturgia subverte a conhecida tradição das tragédias e dos dramas sociais por meio da paródia e da ironia, substituindo o pathos trágico por humor e deboche. Fortemente marcada por traços recorrentes na arte pós-moderna, Frank Pig Says Hello apresenta-se como uma peça que, ao desconstruir as formas dramáticas tradicionais, desconstrói também, por via do riso, do sarcasmo e do grotesco, motivos e fatos associados à história da Irlanda, assim como questiona valores hegemônicos da cultura ocidental. O presente estudo analisa a parodização da ação trágica na peça, examinando as relações entre dramaticidade, violência e irreverência estética.

  15. Superconductivity in nanostructured lead

    Science.gov (United States)

    Lungu, Anca; Bleiweiss, Michael; Amirzadeh, Jafar; Saygi, Salih; Dimofte, Andreea; Yin, Ming; Iqbal, Zafar; Datta, Timir

    2001-01-01

    Three-dimensional nanoscale structures of lead were fabricated by electrodeposition of pure lead into artificial porous opal. The size of the metallic regions was comparable to the superconducting coherence length of bulk lead. Tc as high as 7.36 K was observed, also d Tc/d H was 2.7 times smaller than in bulk lead. Many of the characteristics of these differ from bulk lead, a type I superconductor. Irreversibility line and magnetic relaxation rates ( S) were also studied. S( T) displayed two maxima, with a peak value about 10 times smaller than that of typical high- Tc superconductors.

  16. Lead in the environment

    Science.gov (United States)

    Pattee, Oliver H.; Pain, Deborah J.; Hoffman, David J.; Rattner, Barnett A.; Burton, G. Allen; Cairns, John

    2003-01-01

    Anthropogenic uses of lead have probably altered its availability and environmental distribution more than any other toxic element. Consequently, lead concentrations in many living organisms may be approaching thresholds of toxicity for the adverse effects of lead. Such thresholds are difficult to define, as they vary with the chemical and physical form of lead, exposure regime, other elements present and also vary both within and between species. The technological capability to accurately quantify low lead concentrations has increased over the last decade, and physiological and behavioral effects have been measured in wildlife with tissue lead concentrations below those previously considered safe for humans.s.236 Consequently. lead criteria for the protection of wildlife and human health are frequently under review, and 'thresholds' of lead toxicity are being reconsidered. Proposed lead criteria for the protection of natural resources have been reviewed by Eisler. Uptake of lead by plants is limited by its generally low availability in soils and sediments, and toxicity may be limited by storage mechanisms and its apparently limited translocation within most plants. Lead does not generally accumulate within the foliar parts of plants, which limits its transfer to higher trophic levels. Although lead may concentrate in plant and animal tissues, no evidence of biomagnification exists. Acid deposition onto surface waters and soils with low buffering capacity may influence the availability of lead for uptake by plants and animals, and this may merit investigation at susceptible sites. The biological significance of chronic low-level lead exposure to wildlife is sometimes difficult to quantify. Animals living in urban environments or near point sources of lead emission are inevitably subject to greater exposure to lead and enhanced risk of lead poisoning. Increasingly strict controls on lead emissions in many countries have reduced exposure to lead from some sources

  17. ALICE: Simulated lead-lead collision

    CERN Multimedia

    2003-01-01

    This track is an example of simulated data modelled for the ALICE detector on the Large Hadron Collider (LHC) at CERN, which will begin taking data in 2008. ALICE will focus on the study of collisions between nuclei of lead, a heavy element that produces many different particles when collided. It is hoped that these collisions will produce a new state of matter known as the quark-gluon plasma, which existed billionths of a second after the Big Bang.

  18. Secondary lead production

    Energy Technology Data Exchange (ETDEWEB)

    Hollis, R.G.

    1990-10-16

    This invention is concerned with the efficient recovery of soft lead from the paste component of used automobile lead-acid storage batteries. According to the invention, a scrap which contains lead oxide, lead sulfate, and antimony in an oxidized state is processed in the following steps to recover lead. A refractory lined reaction vessel is continuously charged with the scrap, along with a reductant effective for reducing lead oxide. The charged material is melted and agitated by means of a submerged lance at 900-1150{degree}C whereby some of the lead oxide of the scrap is reduced to form molten lead. A slag layer is then formed above the molten lead, and an amount of lead oxide is maintained in the slag layer. The molten lead, now containing under 0.5 wt % of antimony, is removed, and the antimony oxide in the scrap is concentrated as oxide in the slag layer. Preferred embodiments of the invention result in the production, in a single step, of a soft lead substantially free of antimony. The slag may be subsequently treated to reduce the antimony oxide and produce a valuable antimony-lead product. Further advantages of the process are that a wet battery paste may be used as the feed without prior drying, and the process can be conducted at a temperature 100-150{degree}C lower than in previously known methods. In addition, a smaller reactor can be employed which reduces both capital cost and fuel costs. The process of the invention is illustrated by descriptions of pilot plant tests. 1 fig.

  19. Disruption of the podosome adaptor protein TKS4 (SH3PXD2B) causes the skeletal dysplasia, eye, and cardiac abnormalities of Frank-Ter Haar Syndrome.

    Science.gov (United States)

    Iqbal, Zafar; Cejudo-Martin, Pilar; de Brouwer, Arjan; van der Zwaag, Bert; Ruiz-Lozano, Pilar; Scimia, M Cecilia; Lindsey, James D; Weinreb, Robert; Albrecht, Beate; Megarbane, Andre; Alanay, Yasemin; Ben-Neriah, Ziva; Amenduni, Mariangela; Artuso, Rosangela; Veltman, Joris A; van Beusekom, Ellen; Oudakker, Astrid; Millán, José Luis; Hennekam, Raoul; Hamel, Ben; Courtneidge, Sara A; van Bokhoven, Hans

    2010-02-12

    Frank-Ter Haar syndrome (FTHS), also known as Ter Haar syndrome, is an autosomal-recessive disorder characterized by skeletal, cardiovascular, and eye abnormalities, such as increased intraocular pressure, prominent eyes, and hypertelorism. We have conducted homozygosity mapping on patients representing 12 FTHS families. A locus on chromosome 5q35.1 was identified for which patients from nine families shared homozygosity. For one family, a homozygous deletion mapped exactly to the smallest region of overlapping homozygosity, which contains a single gene, SH3PXD2B. This gene encodes the TKS4 protein, a phox homology (PX) and Src homology 3 (SH3) domain-containing adaptor protein and Src substrate. This protein was recently shown to be involved in the formation of actin-rich membrane protrusions called podosomes or invadopodia, which coordinate pericellular proteolysis with cell migration. Mice lacking Tks4 also showed pronounced skeletal, eye, and cardiac abnormalities and phenocopied the majority of the defects associated with FTHS. These findings establish a role for TKS4 in FTHS and embryonic development. Mutation analysis revealed five different homozygous mutations in SH3PXD2B in seven FTHS families. No SH3PXD2B mutations were detected in six other FTHS families, demonstrating the genetic heterogeneity of this condition. Interestingly however, dermal fibroblasts from one of the individuals without an SH3PXD2B mutation nevertheless expressed lower levels of the TKS4 protein, suggesting a common mechanism underlying disease causation. Copyright (c) 2010 The American Society of Human Genetics. Published by Elsevier Inc. All rights reserved.

  20. Looking at the work of Raul Lino, in comparison with Frank Lloyd Wright: from the Arts & Crafts, the nature, the organic and the house

    Directory of Open Access Journals (Sweden)

    José Manuel Fernandes

    2016-11-01

    Full Text Available El texto hace un análisis comparativo de las obras de Raul Lino (1879-1974, portugués, y Frank Lloyd Wright (1867-1959, de Estados Unidos- dos arquitectos (casi contemporáneos, cada uno exponente de la cultura y la sociedad de su tiempo y de su espacio de vida y de trabajo.El artículo se refiere al contexto histórico y cultural del primer periodo creativo de estos autores. En este contexto trata de las obras de John Ruskin y William Morris, creadores del Arts & Crafts, así como de las características de este movimiento artístico, de las peculiaridades del Deutscher Werkbund y de los trabajos de Sullivan y Berlage. Acerca de Lino y Wright, este artículo presenta la “comprensión del mundo” que tenían: sus temas conceptuales y arquitectónicos, así como los movimientos estéticos y culturales asociados a sus trabajos - “Casa Portuguesa” y “Arquitectura Orgánica”. Se exponen y analizan los “seis principios” de Wright y los “seis principios” de Lino -destacando los aspectos comunes de las concepciones de ambos autores. Se describen y ejemplifican, también, algunos de los temas y materiales arquitectónicos comunes en la primera fase de las obras los arquitectos. Así mismo, se estudia con mayor profundidad el diseño de obras concretas, casas, de su autoría, en sus similitudes y contrastes.

  1. Lead-Free Piezoelectrics

    CERN Document Server

    Nahm, Sahn

    2012-01-01

    Ecological restrictions in many parts of the world are demanding the elimination of Pb from all consumer items. At this moment in the piezoelectric ceramics industry, there is no issue of more importance than the transition to lead-free materials. The goal of Lead-Free Piezoelectrics is to provide a comprehensive overview of the fundamentals and developments in the field of lead-free materials and products to leading researchers in the world. The text presents chapters on demonstrated applications of the lead-free materials, which will allow readers to conceptualize the present possibilities and will be useful for both students and professionals conducting research on ferroelectrics, piezoelectrics, smart materials, lead-free materials, and a variety of applications including sensors, actuators, ultrasonic transducers and energy harvesters.

  2. Lead Poison Detection

    Science.gov (United States)

    1976-01-01

    With NASA contracts, Whittaker Corporations Space Science division has developed an electro-optical instrument to mass screen for lead poisoning. Device is portable and detects protoporphyrin in whole blood. Free corpuscular porphyrins occur as an early effect of lead ingestion. Also detects lead in urine used to confirm blood tests. Test is inexpensive and can be applied by relatively unskilled personnel. Similar Whittaker fluorometry device called "drug screen" can measure morphine and quinine in urine much faster and cheaper than other methods.

  3. varying elastic parameters distributions

    KAUST Repository

    Moussawi, Ali

    2014-12-01

    The experimental identication of mechanical properties is crucial in mechanics for understanding material behavior and for the development of numerical models. Classical identi cation procedures employ standard shaped specimens, assume that the mechanical elds in the object are homogeneous, and recover global properties. Thus, multiple tests are required for full characterization of a heterogeneous object, leading to a time consuming and costly process. The development of non-contact, full- eld measurement techniques from which complex kinematic elds can be recorded has opened the door to a new way of thinking. From the identi cation point of view, suitable methods can be used to process these complex kinematic elds in order to recover multiple spatially varying parameters through one test or a few tests. The requirement is the development of identi cation techniques that can process these complex experimental data. This thesis introduces a novel identi cation technique called the constitutive compatibility method. The key idea is to de ne stresses as compatible with the observed kinematic eld through the chosen class of constitutive equation, making possible the uncoupling of the identi cation of stress from the identi cation of the material parameters. This uncoupling leads to parametrized solutions in cases where 5 the solution is non-unique (due to unknown traction boundary conditions) as demonstrated on 2D numerical examples. First the theory is outlined and the method is demonstrated in 2D applications. Second, the method is implemented within a domain decomposition framework in order to reduce the cost for processing very large problems. Finally, it is extended to 3D numerical examples. Promising results are shown for 2D and 3D problems.

  4. Lead poisoning in dogs

    Energy Technology Data Exchange (ETDEWEB)

    Bond, E; Kubin, R

    1949-01-01

    Diagnosis was made from clinical observation and laboratory examination of nine cases. A successful treatment is described based on the similarity of the metabolism of lead and calcium, the lead being deposited in the bones where it is harmless, if it remains there. Details are given of the treatment.

  5. Developmental immunotoxicology of lead

    International Nuclear Information System (INIS)

    Dietert, Rodney R.; Lee, Ji-Eun; Hussain, Irshad; Piepenbrink, Michael

    2004-01-01

    The heavy metal, lead, is a known developmental immunotoxicant that has been shown to produce immune alterations in humans as well as other species. Unlike many compounds that exert adverse immune effects, lead exposure at low to moderate levels does not produce widespread loss of immune cells. In contrast, changes resulting from lead exposure are subtle at the immune cell population level but, nevertheless, can be functionally dramatic. A hallmark of lead-induced immunotoxicity is a pronounced shift in the balance in T helper cell function toward T helper 2 responses at the expense of T helper 1 functions. This bias alters the nature and range of immune responses that can be produced thereby influencing host susceptibility to various diseases. Immunotoxic responses to lead appear to differ across life stages not only quantitatively with regard to dose response, but also qualitatively in terms of the spectrum of immune alterations. Experimental studies in several lab animal species suggest the latter stages of gestation are a period of considerable sensitivity for lead-induced immunotoxicity. This review describes the basic characteristics of lead-induced immunotoxicity emphasizing experimental animal results. It also provides a framework for the consideration of toxicant exposure effects across life stages. The existence of and probable basis for developmental windows of immune hyper-susceptibility are presented. Finally, the potential for lead to serve as a perinatal risk factor for childhood asthma as well as other diseases is considered

  6. Leading Educational Change Wisely

    Science.gov (United States)

    Forrester, Gillian

    2011-01-01

    In this article, the author reviews Christopher Branson's book entitled "Leading Educational Change Wisely". The book provides an alternative and engaging perspective on leading educational change. Branson utilises "wisdom" as its central conceptual device to present a thought-provoking and philosophical account on how leaders are able to build a…

  7. Hermes Frank Chidam'modzi

    African Journals Online (AJOL)

    specifically analyse or discuss Plato's theories of education or justice. 93 .... the world, the unemployment capital of the world, the poverty continent, the Aids .... the masses would be empowered with the necessary civic and political rights.

  8. Lead-free piezoceramics.

    Science.gov (United States)

    Saito, Yasuyoshi; Takao, Hisaaki; Tani, Toshihiko; Nonoyama, Tatsuhiko; Takatori, Kazumasa; Homma, Takahiko; Nagaya, Toshiatsu; Nakamura, Masaya

    2004-11-04

    Lead has recently been expelled from many commercial applications and materials (for example, from solder, glass and pottery glaze) owing to concerns regarding its toxicity. Lead zirconium titanate (PZT) ceramics are high-performance piezoelectric materials, which are widely used in sensors, actuators and other electronic devices; they contain more than 60 weight per cent lead. Although there has been a concerted effort to develop lead-free piezoelectric ceramics, no effective alternative to PZT has yet been found. Here we report a lead-free piezoelectric ceramic with an electric-field-induced strain comparable to typical actuator-grade PZT. We achieved this through the combination of the discovery of a morphotropic phase boundary in an alkaline niobate-based perovskite solid solution, and the development of a processing route leading to highly textured polycrystals. The ceramic exhibits a piezoelectric constant d33 (the induced charge per unit force applied in the same direction) of above 300 picocoulombs per newton (pC N(-1)), and texturing the material leads to a peak d33 of 416 pC N(-1). The textured material also exhibits temperature-independent field-induced strain characteristics.

  9. Lead poisoning in dogs

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, M R; Lewis, G

    1963-08-03

    Within a short period, 14 cases of lead poisoning in the dogs have been encountered. A detailed record appears justified as no published reference can be found to this condition occurring in Britain and because reports from other countries stress the similarity of the clinical manifestations of lead poisoning to those of the common infections of the dog. Five of the 14 clinical cases of lead poisoning are described. The available literature is reviewed and the diagnosis and significance of the condition discussed. 19 references, 2 tables.

  10. Lead in Construction

    National Research Council Canada - National Science Library

    1993-01-01

    Although Occupational Safety and Health Administration (OSHA) regulations for occupational lead exposure have been in effect since 1971 for the construction and general industries, the agency regulations for general industry in 1978...

  11. Radiation shielding lead shield

    International Nuclear Information System (INIS)

    Dei, Shoichi.

    1991-01-01

    The present invention concerns lead shields for radiation shielding. Shield boxes are disposed so as to surround a pipeline through which radioactive liquids, mists or like other objects are passed. Flanges are formed to each of the end edges of the shield boxes and the shield boxes are connected to each other by the flanges. Upon installation, empty shield boxes not charged with lead particles and iron plate shields are secured at first at the periphery of the pipeline. Then, lead particles are charged into the shield boxes. This attains a state as if lead plate corresponding to the depth of the box is disposed. Accordingly, operations for installation, dismantling and restoration can be conducted in an empty state with reduced weight to facilitate the operations. (I.S.)

  12. Lead poisoning in mink

    Energy Technology Data Exchange (ETDEWEB)

    Purdy, J G

    1962-03-01

    This paper describes a case of lead poisoning in minks. The mink were housed in pens which had been painted with a bridge paint containing lead. They had chewed on the pen and ingested the paint. The animals that did not die were moved to new pens, and vitamin D and calcium gluconate were added to their diets. In three days, a marked improvement was seen in the food and water consumption, and convolutions became less frequent.

  13. Lead poisoning in dogs

    International Nuclear Information System (INIS)

    Zook, B.C.; Carpenter, J.L.; Leeds, E.B.

    1969-01-01

    Lead poisoning was diagnosed and studied in 60 dogs. It was found that lead poisoning is a common disease of young dogs, especially in the summer and fall, and is related to their chewing and eating habits resulting in the ingestion of paint, linoleum, or other lead-containing materials. The signs were characterized by gastrointestinal dysfunction (colic, vomiting, and diarrhea) and nervous disorders (convulsions, hysteria, nervousness, behavioral changes). The blood findings, which the authors consider nearly pathognomonic, consisted of numerous stippled and immature (especially nucleated) erythrocytes in the absence of severe anemia. Protein and casts were frequently found in the urine. Radiography sometimes revealed lead-containing particles in the gastro-intestinal tract, and lead lines were occasionally detected in the metaphysis of long bones in immature dogs. Treatment with calcium ethylenediamine-tetraacetic acid resulted in rapid and often dramatic recoveries in nearly all instances. Removal of lead from the gastrointestinal tract and treatment to relieve pronounced central nervous disorders was sometimes necessary. 40 references, 6 figures, 7 tables

  14. Magnesium Diboride Current Leads

    Science.gov (United States)

    Panek, John

    2010-01-01

    A recently discovered superconductor, magnesium diboride (MgB2), can be used to fabricate conducting leads used in cryogenic applications. Dis covered to be superconducting in 2001, MgB2 has the advantage of remaining superconducting at higher temperatures than the previously used material, NbTi. The purpose of these leads is to provide 2 A of electricity to motors located in a 1.3 K environment. The providing environment is a relatively warm 17 K. Requirements for these leads are to survive temperature fluctuations in the 5 K and 11 K heat sinks, and not conduct excessive heat into the 1.3 K environment. Test data showed that each lead in the assembly could conduct 5 A at 4 K, which, when scaled to 17 K, still provided more than the required 2 A. The lead assembly consists of 12 steelclad MgB2 wires, a tensioned Kevlar support, a thermal heat sink interface at 4 K, and base plates. The wires are soldered to heavy copper leads at the 17 K end, and to thin copper-clad NbTi leads at the 1.3 K end. The leads were designed, fabricated, and tested at the Forschungszentrum Karlsruhe - Institut foer Technische Physik before inclusion in Goddard's XRS (X-Ray Spectrometer) instrument onboard the Astro-E2 spacecraft. A key factor is that MgB2 remains superconducting up to 30 K, which means that it does not introduce joule heating as a resistive wire would. Because the required temperature ranges are 1.3-17 K, this provides a large margin of safety. Previous designs lost superconductivity at around 8 K. The disadvantage to MgB2 is that it is a brittle ceramic, and making thin wires from it is challenging. The solution was to encase the leads in thin steel tubes for strength. Previous designs were so brittle as to risk instrument survival. MgB2 leads can be used in any cryogenic application where small currents need to be conducted at below 30 K. Because previous designs would superconduct only at up to 8 K, this new design would be ideal for the 8-30 K range.

  15. El Guggenheim Museum de New York. Interpretación del papel de la estructura a través de la colaboración entre Frank Lloyd Wright y Jaroslav J. Polivka

    OpenAIRE

    Martin Saiz, Diego

    2012-01-01

    Arquitectura y estructura han ido siempre íntimamente ligadas, pero con la aparición del acero y el hormigón surgieron nuevas necesidades formales o estéticas. El Estilo Internacional se inclinó por separar la retícula estructural de los cerramientos. En cambio, la Escuela de Chicago forjó las bases de una arquitectura optimizada y racional. Frank Lloyd Wright, entre estas dos situaciones, optó por seguir las pautas naturales de los materiales, de forma “orgánica”, recuperan...

  16. Gas cooled leads

    International Nuclear Information System (INIS)

    Shutt, R.P.; Rehak, M.L.; Hornik, K.E.

    1993-01-01

    The intent of this paper is to cover as completely as possible and in sufficient detail the topics relevant to lead design. The first part identifies the problems associated with lead design, states the mathematical formulation, and shows the results of numerical and analytical solutions. The second part presents the results of a parametric study whose object is to determine the best choice for cooling method, material, and geometry. These findings axe applied in a third part to the design of high-current leads whose end temperatures are determined from the surrounding equipment. It is found that cooling method or improved heat transfer are not critical once good heat exchange is established. The range 5 5 but extends over a large of values. Mass flow needed to prevent thermal runaway varies linearly with current above a given threshold. Below that value, the mass flow is constant with current. Transient analysis shows no evidence of hysteresis. If cooling is interrupted, the mass flow needed to restore the lead to its initially cooled state grows exponentially with the time that the lead was left without cooling

  17. Temperature Dependent Charge Carrier Dynamics in Formamidinium Lead Iodide Perovskite

    NARCIS (Netherlands)

    Gelvez Rueda, M.C.; Renaud, N.; Grozema, F.C.

    2017-01-01

    The fundamental opto-electronic properties of organic-inorganic hybrid perovskites are strongly affected by their structural parameters. These parameters are particularly critical in formamidinium lead iodide (FAPbI3), in which its large structural disorder leads to a non-perovskite

  18. Inflation and cosmological parameter estimation

    Energy Technology Data Exchange (ETDEWEB)

    Hamann, J.

    2007-05-15

    In this work, we focus on two aspects of cosmological data analysis: inference of parameter values and the search for new effects in the inflationary sector. Constraints on cosmological parameters are commonly derived under the assumption of a minimal model. We point out that this procedure systematically underestimates errors and possibly biases estimates, due to overly restrictive assumptions. In a more conservative approach, we analyse cosmological data using a more general eleven-parameter model. We find that regions of the parameter space that were previously thought ruled out are still compatible with the data; the bounds on individual parameters are relaxed by up to a factor of two, compared to the results for the minimal six-parameter model. Moreover, we analyse a class of inflation models, in which the slow roll conditions are briefly violated, due to a step in the potential. We show that the presence of a step generically leads to an oscillating spectrum and perform a fit to CMB and galaxy clustering data. We do not find conclusive evidence for a step in the potential and derive strong bounds on quantities that parameterise the step. (orig.)

  19. Leading healthcare in complexity.

    Science.gov (United States)

    Cohn, Jeffrey

    2014-12-01

    Healthcare institutions and providers are in complexity. Networks of interconnections from relationships and technology create conditions in which interdependencies and non-linear dynamics lead to surprising, unpredictable outcomes. Previous effective approaches to leadership, focusing on top-down bureaucratic methods, are no longer effective. Leading in complexity requires leaders to accept the complexity, create an adaptive space in which innovation and creativity can flourish and then integrate the successful practices that emerge into the formal organizational structure. Several methods for doing adaptive space work will be discussed. Readers will be able to contrast traditional leadership approaches with leading in complexity. They will learn new behaviours that are required of complexity leaders, along with challenges they will face, often from other leaders within the organization.

  20. Booster parameter list

    International Nuclear Information System (INIS)

    Parsa, Z.

    1986-10-01

    The AGS Booster is designed to be an intermediate synchrotron injector for the AGS, capable of accelerating protons from 200 MeV to 1.5 GeV. The parameters listed include beam and operational parameters and lattice parameters, as well as parameters pertaining to the accelerator's magnets, vacuum system, radio frequency acceleration system, and the tunnel. 60 refs., 41 figs

  1. Lumped-parameter models

    Energy Technology Data Exchange (ETDEWEB)

    Ibsen, Lars Bo; Liingaard, M.

    2006-12-15

    A lumped-parameter model represents the frequency dependent soil-structure interaction of a massless foundation placed on or embedded into an unbounded soil domain. In this technical report the steps of establishing a lumped-parameter model are presented. Following sections are included in this report: Static and dynamic formulation, Simple lumped-parameter models and Advanced lumped-parameter models. (au)

  2. Relational Perspectives on Leading

    DEFF Research Database (Denmark)

    Relational Perspectives on Leading discusses leadership from a relational and social constructionism perspective as practiced on an everyday basis between people. The book pursues a fast growing, practice-based approach - particularly within the Anglo-Saxon parts of the world - to organization...

  3. Learn about Lead

    Science.gov (United States)

    ... Search Main menu Environmental Topics Air Bed Bugs Chemicals and Toxics Environmental Information by Location Greener Living Health Land, ... it has some beneficial uses, it can be toxic to humans and animals causing of health ... some types of industrial facilities, and past use of lead-based paint ...

  4. Leading Causes of Blindness

    Science.gov (United States)

    ... have cataracts. They are the leading cause of blindness in the world. By age 80, more than half of all people in the United States either will have a cataract or have had cataract surgery. Common symptoms are: Blurry vision Colors that seem faded Glare Not being able to ...

  5. Lead User Innovation

    DEFF Research Database (Denmark)

    Brem, Alexander; Larsen, Henry

    2015-01-01

    covers the opposite view, where a company actively searches and involves lead users, however, with limited success also. Based on both cases, we analyze how, in these emerging processes of relating, meaning is co-created in a way that narrows the shared conceptual space for imagination and collaboration...

  6. Girls Leading Outward

    Science.gov (United States)

    Hamed, Heather; Reyes, Jazmin; Moceri, Dominic C.; Morana, Laura; Elias, Maurice J.

    2011-01-01

    The authors describe a program implemented in Red Bank Middle School in New Jersey to help at-risk, minority middle school girls realize their leadership potential. The GLO (Girls Leading Outward) program was developed by the Developing Safe and Civil Schools Project at Rutgers University and is facilitated by university students. Selected middle…

  7. Leading through Conflict

    Science.gov (United States)

    Gerzon, Mark

    2006-01-01

    This article talks about leading significant learning opportunities through conflict of ideas in a school system. Catalyzing school change can turn emotional differences of opinion into learning opportunities. Leaders who want to deal effectively with these challenging, often tense situations need to be more than good managers. They need to be…

  8. Lead Time Study,

    Science.gov (United States)

    1982-05-01

    1979, the number of titanium fabrications dropped from 16 to 4, primarily because of the sponge shortage and EPA and OSHA requirements. Non-military...East - Taiwan, Korea, Singapore, Malaysia and Hong Kong. In addition, a significant amount of ceramic parts, lead frames and high technology

  9. Lead pollution in Islamabad

    International Nuclear Information System (INIS)

    Mohammad, D.; Khatoon, N.; Ishaque, M.; Ahmed, I.

    1997-01-01

    Lead pollution of urban area emanating from the vehicular exhaust alone is being labeled as one of the worst form of environmental degradation attracting our attention for remediation. For factual assessment samples were collected from different areas of Islamabad. These samples consisted of tree scrapings / peelings, which were dried and ground before undertaking analysis for the lead content. The samples were digested with an acid mixture to remove the organic matter and analyzed using GFAAS technique. A total of 81 samples have been analyzed. The results sowed a lead content varying in the range of 8-474 Mu g g/sup -1/) and 23 samples with Pb content <50 Mu g g-1 (8.0-50.0 Mu g g/sup -1/). Most of the samples also contained some growth which consisted of bacterial, algae and fugal cells and the results have been explained on the basis of Pb absorption by these cells. The procedure followed in this study is recommended for evaluation of lead pollution in urban areas. (author)

  10. EFFECT OF LEAD ACETATE

    African Journals Online (AJOL)

    MICROSOFT

    increase in the production of poultry meat at a reasonable cost (Alam et al., ...... 36(4): 537-541. Taggart MA, Figuerola J, Green AJ, Mateo R, Deacon C, Osborn D, ... selenium, lead and copper levels in the livers and bones of five waterfowl ...

  11. Intoxication for lead

    International Nuclear Information System (INIS)

    Velez, Ruben Dario; Tamayo, Margarita Maria

    1999-01-01

    We present a case of a hospitalized girl with bronchopneumonia, who needed mechanic ventilation. Also she had a developmental delay and Burtons border in gums. Radiological studies showed dense transverse metaphiseal bands in long bones and hyperdensity in basal ganglia. We found high serum lead levels

  12. Lead Thickness Measurements

    International Nuclear Information System (INIS)

    Rucinski, R.

    1998-01-01

    The preshower lead thickness applied to the outside of D-Zero's superconducting solenoid vacuum shell was measured at the time of application. This engineering documents those thickness measurements. The lead was ordered in sheets 0.09375-inch and 0.0625-inch thick. The tolerance on thickness was specified to be +/- 0.003-inch. The sheets all were within that thickness tolerance. The nomenclature for each sheet was designated 1T, 1B, 2T, 2B where the numeral designates it's location in the wrap and 'T' or 'B' is short for 'top' or 'bottom' half of the solenoid. Micrometer measurements were taken at six locations around the perimeter of each sheet. The width,length, and weight of each piece was then measured. Using an assumed pure lead density of 0.40974 lb/in 3 , an average sheet thickness was calculated and compared to the perimeter thickness measurements. In every case, the calculated average thickness was a few mils thinner than the perimeter measurements. The ratio was constant, 0.98. This discrepancy is likely due to the assumed pure lead density. It is not felt that the perimeter is thicker than the center regions. The data suggests that the physical thickness of the sheets is uniform to +/- 0.0015-inch.

  13. Anatomy of lead poisoning

    African Journals Online (AJOL)

    ABEOLUGBENGAS

    Results: The primary form of lead toxicity is by oxidative stress mechanisms, apoptosis and necrosis involving ... néfastes sur la reproduction à l'avenir. Résultats:La forme ... prostate cancers, abnormal sexual ..... ensure this work is a success.

  14. Scientometry Leading us Astray

    Czech Academy of Sciences Publication Activity Database

    Haindl, Michal

    2010-01-01

    Roč. 2010, č. 82 (2010), s. 8-8 ISSN 0926-4981 Institutional research plan: CEZ:AV0Z10750506 Keywords : scientometry Subject RIV: BD - Theory of Information http://ercim-news.ercim.eu/en82/european-scene/ scientometry -leading-us-astray

  15. Total contribution of airborne lead to blood lead.

    OpenAIRE

    Manton, W I

    1985-01-01

    A nine year study of blood lead concentrations and isotope ratios carried out on a married couple shows that pulmonary deposition cannot account for all the airborne lead in blood; that lead from bone may comprise 70% of blood lead; and that during pregnancy blood lead may double due to mobilisation of lead from bone.

  16. Total contribution of airborne lead to blood lead.

    Science.gov (United States)

    Manton, W I

    1985-01-01

    A nine year study of blood lead concentrations and isotope ratios carried out on a married couple shows that pulmonary deposition cannot account for all the airborne lead in blood; that lead from bone may comprise 70% of blood lead; and that during pregnancy blood lead may double due to mobilisation of lead from bone. PMID:3970881

  17. Design chart of optimum current leads

    International Nuclear Information System (INIS)

    Ishibashi, K.; Katase, A.; Maechata, K.

    1986-01-01

    The heat flow through current leads is one of major heat losses in a superconducting magnet system. To reduce the heat flow, current leads have been optimized in a complex way by varying such quantities as conductor length, cross-sectional area, heat transfer coefficient and cooling perimeter. Therefore, this study is made to simplify the design procedure, and to explain the general characteristics of the current leads. A new combined parameter which takes turbulent flow into account is introduced in the present work to enable us to draw a useful design chart. This chart gives, to a wide variety of current leads, detailed information about the optimum design-viz. geometric dimensions, heat flow into liquid helium, and pressure drop of the cooling gas. Change of the cross-sectional area along the conductor may improve the current lead performance. The effects of this area change are examined in detail

  18. Safety and Health Topics: Lead

    Science.gov (United States)

    ... ammunition, pipes, cable covering, building material, solder, radiation shielding, collapsible tubes, and fishing weights. Lead is also ... lead linings in tanks and radiation protection, leaded glass, work involving soldering, and other work involving lead ...

  19. Central depression of the charge density distributions in lead isotopes

    International Nuclear Information System (INIS)

    Haddad, S.

    2008-01-01

    The central-depression parameters is determined by fitting the charge density distributions in lead isotopes to a three-parameter Fermi distribution. The central-depression parameter increases with the number of neutrons due to the isovector coupling channel of the nuclear interaction and its dependency on density. (author)

  20. Central depression of the charge density distributions in lead isotopes

    International Nuclear Information System (INIS)

    Haddad, S.

    2007-01-01

    The central-depression parameter is determined by fitting the charge density distributions in lead isotopes to a three-parameter Fermi distribution. The central-depression parameter increases with the number of neutrons due to the isovector coupling channel of the nuclear interaction and its dependency on density. (author)

  1. Lead poisoning: The invisible disease

    Science.gov (United States)

    Friend, Milton

    1989-01-01

    Lead poisoning is an intoxication resulting from absorption of hazardous levels of lead into body tissues. Lead pellets from shot shells, when ingested, are the most common source of lead poisoning in migratory birds. Other far less common sources include lead fishing sinkers, mine wastes, paint pigments, bullets, and other lead objects that are swallowed.

  2. Lead toxicity: current concerns.

    OpenAIRE

    Goyer, R A

    1993-01-01

    Over the 20-year period since the first issue of Environmental Health Perspectives was published, there has been considerable progress in the understanding of the potential toxicity of exposure to lead. Many of these advances have been reviewed in published symposia, conferences, and review papers in EHP. This brief review identifies major advances as well as a number of current concerns that present opportunities for prevention and intervention strategies. The major scientific advance has be...

  3. CMS lead tungstate crystals

    CERN Multimedia

    Laurent Guiraud

    2000-01-01

    These crystals are made from lead tungstate, a crystal that is as clear as glass yet with nearly four times the density. They have been produced in Russia to be used as scintillators in the electromagnetic calorimeter on the CMS experiment, part of the LHC project at CERN. When an electron, positron or photon passes through the calorimeter it will cause a cascade of particles that will then be absorbed by these scintillating crystals, allowing the particle's energy to be measured.

  4. Leading change: 3--implementation.

    Science.gov (United States)

    Kerridge, Joanna

    The potential for all staff to contribute to service improvement, irrespective of discipline, role or function, is outlined in the 2011 NHS leadership framework. This advocates developing the skills of the entire workforce to create a climate of continuous service improvement. As nurses are often required to take the lead in managing change in clinical practice, this final article in a three-part series focuses on implementing ande potentia reviewing change.

  5. Disorder parameter of confinement

    International Nuclear Information System (INIS)

    Nakamura, N.; Ejiri, S.; Matsubara, Y.; Suzuki, T.

    1996-01-01

    The disorder parameter of confinement-deconfinement phase transition based on the monopole action determined previously in SU(2) QCD are investigated. We construct an operator which corresponds to the order parameter defined in the abelian Higgs model. The operator shows proper behaviors as the disorder parameter in the numerical simulations of finite temperature QCD. (orig.)

  6. lead glass brick

    CERN Multimedia

    When you look through the glass at a picture behind, the picture appears raised up because light is slowed down in the dense glass. It is this density (4.06 gcm-3) that makes lead glass attractive to physicists. The refractive index of the glass is 1.708 at 400nm (violet light), meaning that light travels in the glass at about 58% its normal speed. At CERN, the OPAL detector uses some 12000 blocks of glass like this to measure particle energies.

  7. Leading change: 2--planning.

    Science.gov (United States)

    Kerridge, Joanna

    National initiatives have outlined the importance of involving frontline staff in service improvement, and the ability to influence and manage change has been identified as an essential skill for delivering new models of care. Nurses often have to take the lead in managing change in clinical practice. The second in a three-part series is designed to help nurses at all levels develop the knowledge and skills to function as change agents within their organisations. This article focuses on planning the change and dealing with resistance.

  8. Leading Change, Adding Value.

    Science.gov (United States)

    Evans, Nick

    2016-09-12

    Essential facts Leading Change, Adding Value is NHS England's new nursing and midwifery framework. It is designed to build on Compassion in Practice (CiP), which was published 3 years ago and set out the 6Cs: compassion, care, commitment, courage, competence and communication. CiP established the values at the heart of nursing and midwifery, while the new framework sets out how staff can help transform the health and care sectors to meet the aims of the NHS England's Five Year Forward View.

  9. Turning lead into gold

    DEFF Research Database (Denmark)

    Jensen, Steffen Moltrup Ernø

    For years the field of entrepreneurship has been blinded by the alchemical promise of turning lead into gold, of finding the ones most likely to become the next Branson, Zuckerberg or Gates. The promise has been created in the midst of political and scientific agendas where certain individuals...... is not to accumulate state or market wealth, but for entrepreneurial skills to become tools towards the liberation of the individual from oppressive systems of control – essentially to add public value rather than economic value. In this presentation I will sketch an anarchist perspective on entrepreneurship, looking...

  10. Leading Baryon Production at HERA

    International Nuclear Information System (INIS)

    Dodonov, V.; Schmitt, S.

    2009-01-01

    The production of highly energetic forward neutrons has been studied in deep-inelastic scattering. The data were taken with the H1 detector at HERA in the years 2006-2007 and correspond to an integrated luminosity of 117 pb -1 . Semi-inclusive cross sections have been measured in the kinematic region 4 2 2 , 0.7*10 -4 -1 and the fractional momentum of the neutron 0.3 L T and compared to the predictions of models of leading neutron production. Differential cross sections for dijet photoproduction and in association with a leading neutron have been measured in the reaction e + p → e + jet jet X n with the ZEUS detector at HERA using an integrated luminosity of 40pb -1 . The data are consistent with a simple pion exchange model. The ratio of the neutron-tagged and dijet cross sections show violations of factorization of the lepton and photon vertices which can be explained by kinematic effects constraining the phase space for neutron production. Normalised double-differential leading-neutron cross sections have been measured in dijet photoproduction for the first time. The distributions can be fully characterised by only two energy dependent parameters extracted from fits to the data. Absorption effects were studied by comparing the dijet photoproduction measurements and similar results in deep inelastic scattering. No clear effect, not related to kinematics, was observed. In a resolved-enriched dijet photoproduction sample, significantly fewer neutrons were seen than for direct. This depletion can also be accounted for by kinematic constraints. The semi-inclusive reaction e + p → e + X p was studied with the ZEUS detector at HERA using an integrated luminosity of 12.8 pb -1 . The final state proton, which was detected with the ZEUS leading proton spectrometer, carried a large fraction of the incoming proton energy, x L > 0.32, and its transverse momentum squared satisfied p T 2 2 ; the exchanged photon virtuality, Q 2 , was greater than 3 GeV 2 and the range of

  11. Remediation of lead contaminated soil

    International Nuclear Information System (INIS)

    Urban, W.; Krishnamurthy, S.

    1992-01-01

    Lead contaminated soil in urban area is of major concern because of the potential health risk to children. Many studies have established a direct correlation between lead in soil and elevated blood lead levels in children. In Minneapolis, Minnesota, Mielke et al. (1983) reported that 50% of the Hmong children with lead poisioning were in areas where soil lead levels were between 500 and 1000 micrograms per gram (ug/g), and 40% of the children suffering from lead poisioning lived in areas where soil lead levels exceeded 1000 ug/g. In urban areas, lead pollution in soil has come from many different sources. The sources include lead paint, lead batteries and automobile exhaust. Olson and Skogerbee (1975) found the following lead compounds in soils where the primary source of pollution was from automobiles: lead sulfate, lead oxide, lead dioxide, lead sulfide, and metallic lead. The primary form of lead found was lead sulfate. Lead sulfate, lead tetraoxide, white lead, and other forms of lead have been used in the manufacture of paints for houses. At present, two remediation techniques, solidification and Bureau of Mines fluosilicic acid leaching, are available for lead-contaminated sites. The objective of the present investigation at the Risk Reduction Engineering Laboratory (RREL), Edison, was to try to solubilize the lead species by appropriate reagents and then recover the contaminants by precipitation as lead sulfate, using environmentally acceptable methods. The apparatus used for mixing was a LabMaster mixer, with variable speed and high-shear impeller. Previous work had used nitric acid for dissolving metallic lead. Owing to the environmental concerns, it was decided to use acetic acid in the presence of oxygen. The theoretical justification for this approach is the favorable redox potential for the reaction between metallic lead, acetic acid, and gaseous oxygen

  12. The optimum lead thickness for lead-activation detectors

    International Nuclear Information System (INIS)

    Si Fenni; Hu Qingyuan

    2009-01-01

    The optimum lead thickness for lead-activation detectors has been studied in this paper. First existence of the optimum lead thickness is explained theoretically. Then the optimum lead thickness is obtained by two methods, MCNP5 calculation and mathematical estimation. At last factors which affect the optimum lead thickness are discussed. It turns out that the optimum lead thickness is irrelevant to incident neutron energies. It is recommended 2.5 cm generally.

  13. Who will lead?

    Science.gov (United States)

    Gustafson, R P; Schlosser, J R

    1997-01-01

    A recent survey conducted by the UCLA Center for Health Services Management and the Physician Executive Practice of Heidrick & Struggles, an executive search firm, sheds light on the emerging physician executive's role. The goal of the research was to identify success factors as a means of evaluating and developing effective industry leaders. Respondents were asked to look at specific skills in relation to nine categories: Communication, leadership, interpersonal skills, self-motivation/management, organizational knowledge, organizational strategy, administrative skills, and thinking. Communication, leadership, and self-motivation/management emerged, in that order, as the three most important success factors for physician executives. An individual's general competencies, work styles, and ability to lead others through organizational restructuring defines his or her appropriateness for managerial positions in the health care industry.

  14. Photovoltaic module parameters acquisition model

    Energy Technology Data Exchange (ETDEWEB)

    Cibira, Gabriel, E-mail: cibira@lm.uniza.sk; Koščová, Marcela, E-mail: mkoscova@lm.uniza.sk

    2014-09-01

    Highlights: • Photovoltaic five-parameter model is proposed using Matlab{sup ®} and Simulink. • The model acquisits input sparse data matrix from stigmatic measurement. • Computer simulations lead to continuous I–V and P–V characteristics. • Extrapolated I–V and P–V characteristics are in hand. • The model allows us to predict photovoltaics exploitation in different conditions. - Abstract: This paper presents basic procedures for photovoltaic (PV) module parameters acquisition using MATLAB and Simulink modelling. In first step, MATLAB and Simulink theoretical model are set to calculate I–V and P–V characteristics for PV module based on equivalent electrical circuit. Then, limited I–V data string is obtained from examined PV module using standard measurement equipment at standard irradiation and temperature conditions and stated into MATLAB data matrix as a reference model. Next, the theoretical model is optimized to keep-up with the reference model and to learn its basic parameters relations, over sparse data matrix. Finally, PV module parameters are deliverable for acquisition at different realistic irradiation, temperature conditions as well as series resistance. Besides of output power characteristics and efficiency calculation for PV module or system, proposed model validates computing statistical deviation compared to reference model.

  15. Photovoltaic module parameters acquisition model

    International Nuclear Information System (INIS)

    Cibira, Gabriel; Koščová, Marcela

    2014-01-01

    Highlights: • Photovoltaic five-parameter model is proposed using Matlab ® and Simulink. • The model acquisits input sparse data matrix from stigmatic measurement. • Computer simulations lead to continuous I–V and P–V characteristics. • Extrapolated I–V and P–V characteristics are in hand. • The model allows us to predict photovoltaics exploitation in different conditions. - Abstract: This paper presents basic procedures for photovoltaic (PV) module parameters acquisition using MATLAB and Simulink modelling. In first step, MATLAB and Simulink theoretical model are set to calculate I–V and P–V characteristics for PV module based on equivalent electrical circuit. Then, limited I–V data string is obtained from examined PV module using standard measurement equipment at standard irradiation and temperature conditions and stated into MATLAB data matrix as a reference model. Next, the theoretical model is optimized to keep-up with the reference model and to learn its basic parameters relations, over sparse data matrix. Finally, PV module parameters are deliverable for acquisition at different realistic irradiation, temperature conditions as well as series resistance. Besides of output power characteristics and efficiency calculation for PV module or system, proposed model validates computing statistical deviation compared to reference model

  16. On noncommutativity with bifermionic parameter

    International Nuclear Information System (INIS)

    Acatrinei, Ciprian Sorin

    2008-01-01

    Recently Gitman and Vassilevich proposed an interesting model of noncommutative (NC) scalar field theory, with a noncommutativity parameter assumed to be the product of two Grassmann variables. They showed in particular that the model possesses a local energy-momentum tensor. Since such a property is quite unusual for a NC model, we provide here an alternative picture, based on an operatorial formulation of NC field theory. It leads to complete locality of the degrees of freedom of the theory, a property in agreement with the termination of the star-product at the second term in its series. (author)

  17. Lead and lead-based alloys as waste matrix materials

    International Nuclear Information System (INIS)

    Arustamov, A.E.; Ojovan, M.I.; Kachalov, M.B.

    1999-01-01

    Metals and alloys with relatively low melting temperatures such as lead and lead-based alloys are considered in Russia as prospective matrices for encapsulation of spent nuclear fuel in containers in preparation for final disposal in underground repositories. Now lead and lead-based alloys are being used for conditioning spent sealed radioactive sources at radioactive waste disposal facilities

  18. Lead remediation and changes in human lead exposure: some physiological and biokinetic dimensions.

    Science.gov (United States)

    Mushak, Paul

    2003-02-15

    This paper presents a qualitative and quantitative analysis of the various aspects of lead remediation effectiveness with particular reference to human health risk assessment. One of the key elements of lead remediation efforts at such sites as those under the Superfund program deals with populations at elevated exposure and toxicity risk in the proximity of, or at, the site of remediation, especially remediation workers, workers at other tasks on sites that were remediated down to some action level of lead concentration in soils, and groups at risk in nearby communities. A second element has to do with how one measures or models lead exposure changes with special reference to baseline and post-remediation conditions. Various biomarkers of lead exposure can be employed, but their use requires detailed knowledge of what results using each means. The most commonly used approach is measurement of blood lead (Pb-B). Recognized limitations in the use of Pb-B has led to the use of predictive Pb exposure models, which are less vulnerable to the many behavioral, physiological, and environmental parameters that can distort isolated or 'single shot' Pb-B testings. A third aspect covered in this paper presents various physiological factors that affect the methods by which one evaluates Pb remediation effectiveness. Finally, this article offers an integrated look at how lead remediation actions directed at one lead source or pathway affect the total lead exposure picture for human populations at elevated lead exposure and toxicity risk.

  19. Josef Frank and the history of architecture: Gothic and the Renaissance, Leon Battista Alberti and Albrecht Dürer in the architectural discourse on Neues Bauen at the beginning of the 1930s

    Directory of Open Access Journals (Sweden)

    Caterina Cardemone

    2016-06-01

    Full Text Available The paper focuses on Josef Frank’s convinced use of historiographical arguments in his sharp critique of German modernist architecture. Frank’s attention to architectural history dates back to his education at the Technische Hochschule in Vienna, with Carl König, and the writing of a doctoral thesis on Leon Battista Alberti’s religious buildings in 1910. If a profound knowledge of Alberti’s writings informs Frank’s entire theoretical work, the point discussed here is the parallel between Neues Bauen and Gothic traced by Frank to exclude Neues Bauen from a true modernity, based, on the opposite, on a classical tradition of thought. An attempt is made to reconstruct Frank’s historiographical references and to insert his work in the broader historiographical context, thus highlighting a close link between architectural theory and critique on the one hand and contemporary historiographical constructions on the other.

  20. Lead poisoning in calves

    Energy Technology Data Exchange (ETDEWEB)

    Reeves, J E

    1964-01-01

    Over a three-year period a farmer lost seven calves in their second month of age. One year ago a tentative diagnosis of rabies was given and a brain was submitted to the Health of Animals Division for examination. No Negri bodies were found. The owner stated that the calves first appeared listless and later exhibited severe nervous signs. Deaths occurred in from one to 24 hours after onset of signs. Appetite and bowel movements were normal. There was no increase in temperature. The calf would lie quietly for an interval, then rise, run down the alley, press against a wall, and go into a convulsion. It acted as if it were in severe pain and during one of the intermittent convulsions, it jumped over a three-foot partition. This calf was sent to the Regional Veterinary Laboratory at Brighton for necropsy. The calf had been dead for 72 hours when submitted to the laboratory. The only gross findings were of mild pleurisy and hemorrhage on the kidney. A tentative diagnosis of lead poisoning was offered and specimens sent to the Division of Pharmacology and Toxicology, Ontario Veterinary College.

  1. Lead intoxication under environmental hypoxia impairs oral health.

    Science.gov (United States)

    Terrizzi, Antonela R; Fernandez-Solari, Javier; Lee, Ching M; Martínez, María Pilar; Conti, María Ines

    2014-01-01

    We have reported that chronic lead intoxication under hypoxic environment induces alveolar bone loss that can lead to periodontal damage with the subsequent loss of teeth. The aim of the present study was to assess the modification of oral inflammatory parameters involved in the pathogenesis of periodontitis in the same experimental model. In gingival tissue, hypoxia increased inducible nitric oxid synthase (iNOS) activity (p lead decreased prostaglandin E2 (PGE2) content (p lead and PGE2 content was increased by both lead and hypoxia (p lead under hypoxic conditions. Results suggest a wide participation of inflammatory markers that mediate alveolar bone loss induced by these environmental conditions. The lack of information regarding oral health in lead-contaminated populations that coexist with hypoxia induced us to evaluate the alteration of inflammatory parameters in rat oral tissues to elucidate the link between periodontal damage and these environmental conditions.

  2. Heart rate variability in workers chronically exposed to lead.

    Science.gov (United States)

    Gajek, Jacek; Zyśko, Dorota; Chlebda, Ewa

    2004-07-01

    Lead is a strong neurotoxin. The effects of lead on the activity of the autonomic nervous system, assessed by the use of heart rate variability (HRV) analysis, have not yet been established. To assess the effects of occupational chronic lead exposure on the autonomic nervous system activity. The study group consisted of 22 copper foundry workers (mean age 41.8+/-8.7 years) who had elevated parameters of lead overload and were admitted to the hospital for chelate therapy. The control group consisted of 13 age-matched healthy males. Lead concentration was measured with the use of atomic absorption spectrophotometry, and concentration of free protoporphyrins in erythrocytes (FEP) using a fluorometric method. Each patient underwent 24-hour ambulatory ECG monitoring, and standard short-term as well as long-term HRV parameters were obtained. There were no significant differences between patients and controls in HRV parameters. In the control group, HRV parameters correlated with age. In patients, a significant negative correlation between lead concentration and some short-term HRV parameters calculated during the night was found: SDNN (r=-0.48, p<0.05), TP (r=-0.48, p<0.01) and LF (r=-0.48, p<0.01). In patients, a negative correlation between lead concentration and HFnight/HFday index was found (r=-0.47 p<0.01), whereas in controls this correlation was positive (r=0.66 p<0.05). Overall HRV indices are similar in subjects exposed to lead and in healthy controls. A decrease in the physiological elevation of HF values during the night, together with an increase in lead blood concentration and lack of relationship between age and HRV parameters in workers chronically exposed to lead may suggest disturbances of the autonomic system. In subjects not exposed to lead a decrease in heart rate with an increase in FEP concentration was observed.

  3. Microstructural changes leading to chemically enhanced drainage

    OpenAIRE

    Minder Pascal; Puzrin Alexander M.

    2013-01-01

    The hydration state of clay mineral surfaces is a key influence factor on the mechanical and hydraulic behaviour of clays. Small changes of the cation occupancy of these surfaces can lead to pronounced changes in macroscopic material parameters. The sensitivity of the material response allows for designing chemical soil improvement by selectively exchanging the cations. In this study we explore the effect of a targeted cation exchange in smectite clays to modify soil properties in situ. The h...

  4. QUALITY PARAMETERS IN NANOTECHNOLOGIC APPLICATIONS

    Directory of Open Access Journals (Sweden)

    Ayşegül Akdoğan Eker

    2013-06-01

    Full Text Available Nanotechnology concept which has added a new dimension to our lives in recent years, is finding a place in every sector day by day. The combined effect of nanotechnology is almost equal to the industrial revolution of last 200 years and have is able to fill all developments in a few years. However this development should be taken under control. Otherwise unstoppable new structures will not ease life but will be a problem for humanity. For this purpose, the main parameters (from the start up stage of nano-technologic applications to the obtained product should be checked. These parameters are actually not different than the adaptation of the classical quality indicators for nanotechnology applications. Especially it plays an important role in obtaining a uniform distribution and regarding the features of the end product in nano-technological ceramic and etc. applications. The most important problem faced in particles of that size is the accumulation they create. Another problem is the increasing friction force as size gets smaller. The friction force of asubstance increases proportionally with the cube of its surface area. Another problem is surface tension. The increasing surface tension due to increasing surface area will cause the particles to attract and stick to each other. The structures aimed to be obtained are mostly complex and especially in upwards approach, it is thermodynamically very hard for the atoms to get into that order. Therefore in this announcement, we stated the quality parameters that will be taken into consideration in nano-technological applications and the methods for obtaining those parameters. The aim is to explain these parameters with all dimensions so that they will lead the way to the future nano-technological applications.

  5. Drowning: a leading killer!

    Directory of Open Access Journals (Sweden)

    Nuno Domingos Garrido

    2016-10-01

    Full Text Available Drowning kills at least 372,000 people worldwide every year and is the 3rd leading cause of unintentional death, accounting for 7% of all deaths stemming from accidents (WHO, 2014. Conceptually, “drowning” is a complex and multi-faceted phenomenon, characterized as a chain of events (Bierens, 2006. Drowning is defined as the process of experiencing respiratory impairment from immersion or submersion in liquid. Research on drowning as a phenomenon presents several difficulties - most of all, that global data concerning the number of occurrences are not accurate. Nevertheless, detailed analysis of the registered incidents allows the identification of risk factors of drowning. An in-depth analysis of the risk factors is the basis for the creation of targeted and effective strategies to prevent drowning. Due to variability of situations which could lead to a drowning episode, experts suggest the adoption of a multi-layer prevention model, rather than opting for isolated measures, since no single measure can prevent all deaths and injuries caused by submersion. Among the preventive measures we would like to emphasize instruction in swimming and water safety. So, what does "knowing how to swim" really mean? Some authors define mastery of this competence as swimming a given distance, while others put the emphasis on how this/any given distance is swum (Stallman, Junge, & Blixt, 2008. It has long been realized that there is no contradiction between learning those competencies which make a person less susceptible to drowning and those competencies which prepare the path towards higher levels of performance and competition. Aquatic movement researchers and practitioners and drowning prevention researchers and practitioners, share in the responsibility for drowning prevention though they are often unaware of it. The question “What should be taught to children?” is too infrequently asked. There remains great variation in what is taught and programs

  6. Leading Your Leaders

    Science.gov (United States)

    Hale, Wayne N.

    2008-01-01

    life is good. More often when an unbelievably difficult test fails, we are left with a very long discussion of why and what was wrong in the design or execution of the test. Make sure that the test is well defined. Even then, it is important to explain to your leaders what inherent accuracy (or error) the test conditions or equipment have and what the assumptions or initial conditions were for the test. Test results without a good understanding of the test's accuracy or the pedigree of the test assumptions are worth very little. Finally, there is flight test data. Always limited, never at the edge of the envelope, it still shows how the real hardware works in a combined environment. Flight experience is dangerous because it typically doesn't show how close to the edge of the cliff the equipment is operating, but it does demonstrate how the hardware really works. A flight test is the ultimate test, again taken with the knowledge that it is probably not the extreme but something more like the middle of the environmental and systems performance. Good understanding of a problem and its solution always relies on a combination of all these methods. Be sure to lead your leaders by using all the tools you have at your disposal. At the end of the day, decisions in space flight always come down to a risk trade. Our business is not remotely safe, not in the sense that the public, the media, or our legislators use the term. Everything we do has a risk, cost, schedule, or performance trade-off. For your leaders to make an appropriate decision, you need to educate them, lead them, talk with them, and engage them in the discussion until full understanding takes place. It's your job. *

  7. Cosmological Parameters 2000

    OpenAIRE

    Primack, Joel R.

    2000-01-01

    The cosmological parameters that I emphasize are the age of the universe $t_0$, the Hubble parameter $H_0 \\equiv 100 h$ km s$^{-1}$ Mpc$^{-1}$, the average matter density $\\Omega_m$, the baryonic matter density $\\Omega_b$, the neutrino density $\\Omega_\

  8. Manurial properties of lead nitrate

    Energy Technology Data Exchange (ETDEWEB)

    Berry, R A

    1924-01-01

    Water culture, pot and field experiments were conducted in order to determine the toxic and stimulating limit of lead nitrate in solution. Oats and rye grass were evaluated for evidence of lead poisoning. Results indicate that except in solutions of fairly high concentration, soil adsorbs the lead and destroys the toxicity of soluble lead salts. There was evidence to show that the addition of lead salts increased the rate of nitrification in soil.

  9. Frank Wollman v kontextu strukturální teorie a terénních výzkumů slovesného folkloru (Příspěvek k nálezu tzv. wollmanovského moravského sběru)

    Czech Academy of Sciences Publication Activity Database

    Zelenková, Anna

    2017-01-01

    Roč. 104, č. 4 (2017), s. 493-509 ISSN 0009-0794 Institutional support: RVO:68378017 Keywords : Wollman, Frank * Czech and Slovak folklore studies * the structural theory of folklore * Moravian collection of folk verbal art Subject RIV: AJ - Letters, Mass-media, Audiovision OBOR OECD: Literary theory

  10. Lead in teeth from lead-dosed goats: Microdistribution and relationship to the cumulative lead dose

    International Nuclear Information System (INIS)

    Bellis, David J.; Hetter, Katherine M.; Jones, Joseph; Amarasiriwardena, Dula; Parsons, Patrick J.

    2008-01-01

    Teeth are commonly used as a biomarker of long-term lead exposure. There appear to be few data, however, on the content or distribution of lead in teeth where data on specific lead intake (dose) are also available. This study describes the analysis of a convenience sample of teeth from animals that were dosed with lead for other purposes, i.e., a proficiency testing program for blood lead. Lead concentration of whole teeth obtained from 23 animals, as determined by atomic absorption spectrometry, varied from 0.6 to 80 μg g -1 . Linear regression of whole tooth lead (μg g -1 ) on the cumulative lead dose received by the animal (g) yielded a slope of 1.2, with r 2 =0.647 (p -1 , were found in circumpulpal dentine. Linear regression of circumpulpal lead (μg g -1 ) on cumulative lead dose (g) yielded a slope of 23 with r 2 =0.961 (p=0.0001). The data indicated that whole tooth lead, and especially circumpulpal lead, of dosed goats increased linearly with cumulative lead exposure. These data suggest that circumpulpal dentine is a better biomarker of cumulative lead exposure than is whole tooth lead, at least for lead-dosed goats

  11. Magnetic S-parameter

    DEFF Research Database (Denmark)

    Sannino, Francesco

    2010-01-01

    We propose a direct test of the existence of gauge duals for nonsupersymmetric asymptotically free gauge theories developing an infrared fixed point by computing the S-parameter in the electric and dual magnetic description. In particular we show that at the lower bound of the conformal window...... the magnetic S-parameter, i.e. the one determined via the dual magnetic gauge theory, assumes a simple expression in terms of the elementary magnetic degrees of freedom. The results further support our recent conjecture of the existence of a universal lower bound on the S parameter and indicates...

  12. Lead pollution sources and Impacts

    International Nuclear Information System (INIS)

    El-Haggar, S.M.; Saad, S.G.; Saleh, S.K.; El-Kady, M.A.

    1996-01-01

    Despite the medical awareness of lead toxicity, and despite legislation designed to reduce environmental contamination, lead is one of the most widely used heavy metals. Significant human exposure occurs from automobile exhaust fumes, cigarette smoking, lead-based paints and plumbing systems lead spread in the environment can take place in several ways, the most important of which is through the lead compounds released in automobile exhaust as a direct result of the addition of tetraethyl or tetraethyl lead to gasoline as octane boosting agents. Of special is the effect of lead pollution on children, which affects their behavioral and educational attributes considerably. The major channel through through which lead is absorbed is through inhalation of lead compounds in the atmosphere. Lead is a heavy metal characterized its malleability, ductility and poor conduction of electricity. So, it has a wide range of applications ranging from battery manufacturing to glazing ceramics. It is rarely found free in nature but is present in several minerals and compounds. The aim of this paper is to discuss natural and anthropogenic sources of lead together with its distribution and trends with emphasis on egypt. The effects of lead pollution on human health, vegetation and welfare are also presented. It could be concluded that, the excessive release of lead into the environment, especially through the atmosphere, can produce many detrimental and sometimes fatal effects on human, agriculture and zoological life. Besides, it is very plain that there is a serious problem of pollution lead in egypt and specially in cairo. 7 figs

  13. Parameter estimation and prediction of nonlinear biological systems: some examples

    NARCIS (Netherlands)

    Doeswijk, T.G.; Keesman, K.J.

    2006-01-01

    Rearranging and reparameterizing a discrete-time nonlinear model with polynomial quotient structure in input, output and parameters (xk = f(Z, p)) leads to a model linear in its (new) parameters. As a result, the parameter estimation problem becomes a so-called errors-in-variables problem for which

  14. Lead Contamination and Microbial Lead Tolerance in Soils at Major ...

    African Journals Online (AJOL)

    Devika

    ABSTRACT: Lead pollution and lead tolerance levels of microbes in soil at major road junctions in Benin. City were investigated. Results revealed that distance from the road junctions affected the concentrations of lead in soil, as well as the microbial population density and types of microbes present in the soil. The highest ...

  15. Lead Contamination and Microbial Lead Tolerance in Soils at Major ...

    African Journals Online (AJOL)

    Lead pollution and lead tolerance levels of microbes in soil at major road junctions in Benin City were investigated. Results revealed that distance from the road junctions affected the concentrations of lead in soil, as well as the microbial population density and types of microbes present in the soil. The highest concentrations ...

  16. Leaded gasoline - an environmental problem

    International Nuclear Information System (INIS)

    Petrushevska, Ljubica

    2001-01-01

    In the European countries it is a clear trend towards the increasing consumption of unleaded gasolines. Driving force of this trend is, on the one hand the high toxicity of lead compounds and on the other, the necessity of purification of exhaust gases by catalytic converters, for which the lead represent a catalyst poison. In Macedonia, the limit lead content in the leaded gasolines is relatively high (0,6 g/l), as well as the consumption of the leaded gasolines. Rapid and complete transition to unleaded gasolines can be realized by the concept of step by step reduction of lead in our gasolines. (Original)

  17. Experimental lead poisoning in chickens

    Energy Technology Data Exchange (ETDEWEB)

    Silven, L.

    1967-01-01

    Poisoning of water fowl due to the intake of lead shot is not rare in the USA. In order to study this kind of poisoning more closely domestic fowl were given varying amounts of lead shot and lead powder. This treatment did not provoke any symptoms of poisoning. Chemical analyses of different organs, muscles, skeleton and eggs yielded low lead values. It is concluded that the low toxicity of lead administered as lead shot to the domestic fowl is due to a low absorption rate from the gastro-intestinal tract.

  18. Decontamination and coating of lead

    International Nuclear Information System (INIS)

    Rankin, W.N.; Bush, S.P.; Lyon, C.E.; Walker, V.

    1988-01-01

    Technology is being developed to decontaminate lead used in shielding applications in contaminated environments for recycle as shieldings. Technology is also being developed to coat either decontaminated lead or new lead before it is used in contaminated environments. The surface of the coating is expected to be much easier to decontaminate than the original lead surface. If contamination becomes severely embedded in the coating and cannot be removed, it can be easily cut with a knife and removed from the lead. The used coating can be disposed of as radioactive (hot hazardous) waste. The lead can then be recoated for further use as a shielding material

  19. SATELLITE CONSTELLATION DESIGN PARAMETER

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. SATELLITE CONSTELLATION DESIGN PARAMETER. 1. ORBIT CHARACTERISTICS. ORBITAL HEIGHT >= 20,000 KM. LONGER VISIBILITY; ORBITAL PERIOD. PERTURBATIONS(MINIMUM). SOLAR RADIATION PRESSURE (IMPACTS ECCENTRICITY); LUNI ...

  20. Reassessment of safeguards parameters

    Energy Technology Data Exchange (ETDEWEB)

    Hakkila, E.A.; Richter, J.L.; Mullen, M.F.

    1994-07-01

    The International Atomic Energy Agency is reassessing the timeliness and goal quantity parameters that are used in defining safeguards approaches. This study reviews technology developments since the parameters were established in the 1970s and concludes that there is no reason to relax goal quantity or conversion time for reactor-grade plutonium relative to weapons-grade plutonium. For low-enriched uranium, especially in countries with advanced enrichment capability there may be an incentive to shorten the detection time.

  1. Safeguards systems parameters

    International Nuclear Information System (INIS)

    Avenhaus, R.; Heil, J.

    1979-01-01

    In this paper analyses are made of the values of those parameters that characterize the present safeguards system that is applied to a national fuel cycle; those values have to be fixed quantitatively so that all actions of the safeguards authority are specified precisely. The analysis starts by introducing three categories of quantities: The design parameters (number of MBAs, inventory frequency, variance of MUF, verification effort and false-alarm probability) describe those quantities whose values have to be specified before the safeguards system can be implemented. The performance criteria (probability of detection, expected detection time, goal quantity) measure the effectiveness of a safeguards system; and the standards (threshold amount and critical time) characterize the magnitude of the proliferation problem. The means by which the values of the individual design parameters can be determined with the help of the performance criteria; which qualitative arguments can narrow down the arbitrariness of the choice of values of the remaining parameters; and which parameter values have to be fixed more or less arbitrarily, are investigated. As a result of these considerations, which include the optimal allocation of a given inspection effort, the problem of analysing the structure of the safeguards system is reduced to an evaluation of the interplay of only a few parameters, essentially the quality of the measurement system (variance of MUF), verification effort, false-alarm probability, goal quantity and probability of detection

  2. on the biochemical indicators of lead poisoning in

    African Journals Online (AJOL)

    N. Sadi

    1 sept. 2017 ... ABSTRACT. This study is conducted to examine the effect of the oral administration of pectin of dates on perturbation of the biochemical parameters induced by lead. Male rats were exposed to lead acetate at 350mg/Kg for one month, after this period, rats treated during one month with the pectin of date at ...

  3. Dactylifera L) on the biochemical indicators of lead poisoning in ...

    African Journals Online (AJOL)

    This study is conducted to examine the effect of the oral administration of pectin of dates on perturbation of the biochemical parameters induced by lead. Male rats were exposed to lead acetate at 350mg/Kg for one month, after this period, rats treated during one month with the pectin of date at 3%. Rats were sacrificed, the ...

  4. A study on expelling lead with a traditional Chinese medicine

    International Nuclear Information System (INIS)

    Sun Aizhen; Guo Ruixin; Zhou Jieyan; Wang Dongfeng; Wang Huifang

    1993-01-01

    The rat model poisoned by lead acetate was treated with either EDTA or a traditional Chinese medicine (TCM) with the ability of 'relieving toxin and strengthening spleen'. In EDTA group, lead contents in blood fell to normal; the other parameters apparently improved but did not return to normal(p 0.05). But in TCM group, all the parameters returned to normal (p > 0.05) and the contents of essential trace elements in urine did not obviously change (p < 0.05). The curative effect of TCM is therefore better than that of EDTA. The mechanism probably lies in following points: (1) TCM can expedite excretion of lead in feces and decrease the lead accumulation in liver; (2) FEP returns to normal, showing that the lead expelling effect of TCM is relatively complete; (3) TCM does not disturb the interior equilibrium of essential trace elements while expelling lead

  5. Forming lead-based anodes

    Energy Technology Data Exchange (ETDEWEB)

    Ogorodnichuk, V I; Voitsekhovich, R I

    1972-01-01

    Lead-based anodes can be produced by forming a layer of lead dioxide by chemical treatment in a solution of sulfuric acid in potassium permanganate at 80 to 100/sup 0/. The solution is mixed by compressed air. (RWR)

  6. Common ECG Lead Placement Errors. Part I: Limb Lead Reversals

    Directory of Open Access Journals (Sweden)

    Allison V. Rosen

    2015-10-01

    Full Text Available Background: Electrocardiography (ECG is a very useful diagnostic tool. However, errors in placement of ECG leads can create artifacts, mimic pathologies, and hinder proper ECG interpretation. It is important for members of the health care team to be able to recognize the common patterns resulting from lead placement errors. Methods: 12-lead ECGs were recorded in a single male healthy subject in his mid 20s. Six different limb lead reversals were compared to ECG recordings from correct lead placement. Results: Classic ECG patterns were observed when leads were reversed. Methods of discriminating these ECG patterns from true pathologic findings were described. Conclusion: Correct recording and interpretation of ECGs is key to providing optimal patient care. It is therefore crucial to be able to recognize common ECG patterns that are indicative of lead reversals.

  7. Lead user projects in practice

    DEFF Research Database (Denmark)

    Brem, Alexander; Gutstein, Adele

    2018-01-01

    Earlier research on the lead user method is focused on individual case studies and how the method was applied in a specific context. In this paper, we take a broader approach, analyzing a sample of 24 lead user projects, which included working with 188 lead users. These projects were analyzed...

  8. Lead poisoning in domestic ducks

    Energy Technology Data Exchange (ETDEWEB)

    Rac, R; Crisp, C S

    1954-05-01

    The death of wild ducks, due to the ingestion of lead shop, occurs frequently and is well documented. This paper discusses the death of domestic ducks due to the ingestion of lead. It describes the symptoms, and pathology of the lead poisoning of a clutch of 11 ducklings which were being raised on a farm in Australia. 3 references, 1 table.

  9. A study on lead equivalent

    International Nuclear Information System (INIS)

    Lin Guanxin

    1991-01-01

    A study on the rules in which the lead equivalent of lead glass changes with the energy of X rays or γ ray is described. The reason of this change is discussed and a new testing method of lead equivalent is suggested

  10. Lead- or Lead-bismuth-cooled fast reactors

    International Nuclear Information System (INIS)

    Bouchter, J.C.; Courouau, J.L.; Dufour, P.; Guidez, J.; Latge, C.; Martinelli, L.; Renault, C.; Rimpault, G.

    2014-01-01

    Lead-cooled fast reactors are one of the 6 concepts retained for the 4. generation of nuclear reactors. So far no lead-cooled reactors have existed in the world except lead-bismuth-cooled reactors in soviet submarines. Some problems linked to the use of the lead-bismuth eutectic appeared but were satisfactorily solved by a more rigorous monitoring of the chemistry of the lead-bismuth coolant. Lead presents various advantages as a coolant: no reactivity with water and the air,a high boiling temperature and low contamination when irradiated. The main asset of the lead-bismuth alloy is the drop of the fusion temperature from 327 C degrees to 125 C degrees. The main drawback of using lead (or lead-bismuth) is its high corrosiveness with metals like iron, chromium and nickel. The high corrosiveness of the coolant implies low flow velocities which means a bigger core and consequently a bigger reactor containment. Different research programs in the world (in Europe, Russia and the USA) are reviewed in the article but it appears that the development of this type of reactor requires technological breakthroughs concerning materials and the resistance to corrosion. Furthermore the concept of lead-cooled reactors seems to be associated to a range of low output power because of the compromise between the size of the reactor and its resistance to earthquakes. (A.C.)

  11. Electrical properties of a novel lead alkoxide precursor: Lead glycolate

    International Nuclear Information System (INIS)

    Tangboriboon, Nuchnapa; Pakdeewanishsukho, Kittikhun; Jamieson, Alexander; Sirivat, Anuvat; Wongkasemjit, Sujitra

    2006-01-01

    The reaction of lead acetate trihydrate Pb(CH 3 COO) 2 .3H 2 O and ethylene glycol, using triethylenetetramine (TETA) as a catalyst, provides in one step access to a polymer-like precursor of lead glycolate [-PbOCH 2 CH 2 O-]. On the basis of high-resolution mass spectroscopy, chemical analysis composition, FTIR, 13 C-solid state NMR and TGA, the lead glycolate precursor can be identified as a trimer structure. The FTIR spectrum demonstrates the characteristics of lead glycolate; the peaks at 1086 and 1042 cm -1 can be assigned to the C-O-Pb stretchings. The 13 C-solid state NMR spectrum gives notably only one peak at 68.639 ppm belonging to the ethylene glycol ligand. The phase transformations of lead glycolate and lead acetate trihydrate to lead oxide, their microstructures, and electrical properties were found to vary with increasing temperature. The lead glycolate precursor has superior electrical properties relative to those of lead acetate trihydrate, suggesting that the lead glycolate precursor can possibly be used as a starting material for producing electrical and semiconducting ceramics, viz. ferroelectric, anti-ferroelectric, and piezoelectric materials

  12. Current leads for superconducting magnets

    International Nuclear Information System (INIS)

    Ishibashi, Kenji

    1989-01-01

    Current leads for superconducting magnets have been studied since 1960's. The technology of current leads may seem to have been established both in theory and experiment before the middle of 1970's. Nevertheless, a wide variety of superconducting magnets have been introduced in the last 15 years, and the demands for special current leads have increased in accordance to the variety. A steady advance has been made in the design theory and fabrication of current leads. This paper describes the recent current lead technology regarding the design theory, safety in accidents, and high current capability. (author)

  13. Presence of lead in opium.

    Science.gov (United States)

    Aghaee-Afshar, Mahmoud; Khazaeli, Payam; Behnam, Behzad; Rezazadehkermani, Mohammad; Ashraf-Ganjooei, Narges

    2008-09-01

    Opium addiction is a common form of addiction in Middle East countries such as Iran. Recently several reports suggested some kinds of pathologic findings such as abdominal pain, nephropathy, and anemia in opium addict patients. Such pathologic findings suggest lead poisoning in the patients. In this study, the concentration of lead in 10 opium samples was evaluated. The mean concentration of lead in the opium samples was 1.88 ppm. This may explain some of the pathologic findings found in addict patients. The authors would suggest further investigations to evaluate the lead concentration in opium addicts' sera and also routine screening for lead poisoning in opium addict patients.

  14. Neurophysiological effects of lead exposure

    Energy Technology Data Exchange (ETDEWEB)

    Rosen, I.; Wildt, K.; Gullberg, B.; Berlin, M.

    1983-10-01

    A series of neurophysiological variables was measured for men occupationally exposed to lead. The results were related to the degree of lead exposure and to the concentrations of lead and zinc protoporphyrin in blood. A small but significant correlation was observed between lead exposure and motor and sensory conduction velocities in the lower limbs, the conduction velocities of slow motor fibers in the upper limbs, and also sensory nerve action potentials. It is suggested that a neurophysiological examination should be considered in the surveillance of the health of lead workers.

  15. Mechanism of lead removal by waste materials

    International Nuclear Information System (INIS)

    Qaiser, S.; Saleemi, A.R.; Ahmed, M.M.

    2007-01-01

    Heavy metal ions are priority pollutants, due to their toxicity and mobility in natural water ecosystems. The discharge of heavy metals into aquatic ecosystems has become a matter of concern in Pakistan over the last few decades. These contaminants are introduced into the aquatic systems significantly as a result of various industrial operations. The metals of concern include lead, chromium, zinc, copper, nickel and uranium. Lead is one of the most hazardous and toxic metals. It is used as industrial raw material in the manufacture of storage batteries, pigments, leaded glass, fuels, photographic materials, matches and explosives. Conventional methods for treatment of dissolved lead include precipitation, adsorption, coagulation/notation, sedimentation, reverse osmosis and ion exchange. Each process has its merits and limitations in applications. Adsorption by activated carbon and ion exchange using commercial ion exchange resins are very expensive processes, especially for a developing country like Pakistan. The present research was conducted to identify some waste materials, which can be utilized to remove lead from industrial wastewater. Natural wastes in the form of leaves and ash have considerable amounts of CaO, MgO, Na/sub 2/O, SiO/sub 2/ and Al/sub 2/O/sub 3/ which can be utilized for precipitation and adsorption. Utilization of waste materials to remove lead from industrial wastewater is the basic theme of this research. The waste materials used in this research were maple leaves, pongamia pinata leaves, coal ash and maple ago leave ash. Parameters studied were reaction time, precipitant dose, pH and temperature. It was found that maple leaves ash has maximum lead removal capacity 19.24 mg g/sup -1/ followed by coal ash 13.2 mg g/sup -1/. The optimal pH was 5 for maple leaves and pongamia Pinata leaves; and 4 for coal ash and maple leaves ash. Removal capacity decreased with increase in temperature. The major removal mechanisms were adsorption and

  16. Lead-cooled hybrid reactors and fuel regeneration for energy production and incineration evolution of physical parameters and induced radiotoxicity; Capacites des reacteurs hybrides au plomb pour la production d'energie et l'incineration avec multirecyclage des combustibles evolution des parametres physiques radiotoxicites induites

    Energy Technology Data Exchange (ETDEWEB)

    David, S

    1999-07-01

    The concept of accelerator driven subcritical reactors (hybrid reactors), as re-launched in the beginning of the 1990's by C. Rubbia and C.D. Bowman, allows to open new paths in the management of radioactive wastes. This work treats, first, of the study of the neutron multiplication characteristics in a subcritical reactor core and shows the fundamental differences with critical systems and the advantages that follow. This study is based on the series of measurements performed at Cadarache (Muse experiment), the first results of which are presented. The subcritical property of an hybrid reactor makes this system very flexible and allows to foresee different uses, like the energy production or the incineration of wastes. The second part of this work deals with the Monte Carlo simulation of the capacities of fast spectrum and lead-cooled hybrid systems to produce energy by using different fuel cycles (uranium and thorium), and in the same time regenerating the fissile matter and keeping the reactivity up without any external intervention. Different types of fuel multi-recycles are considered. The results allow to quantify the advantages linked with the use of the thorium cycle, in particular in terms of radiotoxicity abatement. The study of the intermediate steps necessary to develop this reactor technology with the present day fuels (plutonium from thermal reactors and enriched uranium) proposes an efficient management of the actinides produced by today's reactors which are used as auxiliary fissile materials. Finally, the incineration of actinides at the end of the cycle (shutdown scenario) is considered and allows to describe the advantage of lead-cooled hybrid systems for the abatement of the radiotoxicity of an inventory at the end of cycle. (J.S.)

  17. Decontaminating lead bricks and shielding

    International Nuclear Information System (INIS)

    Lussiez, G.

    1994-01-01

    Lead used for shielding is often surface contaminated with radioisotopes and is therefore a RCRA D008 mixed waste. The technology-based standard for treatment is macroencapsulation. However, decontaminating and recycling the clean lead is a more attractive solution. Los Alamos National Laboratory decontaminates material and equipment contaminated with radioisotopes. Decontaminating lead poses special problems because of the RCRA hazard classification and the size of the inventory, now about 50 tons and likely to grow substantially of planned decommissioning operations. Thus lead, in the form of bricks and other shield shapes, is surface contaminated with fission products. One of the best methods for contaminated lead is removing the superficial layer of contamination with an abrasive medium under pressure. For lead, a mixture of alumina with water and air at about 40 psig rapidly and effectively decontaminates the lead. The abrasive medium is sprayed onto the lead in a scaled-off area. The slurry of abrasive and particles of lead falls through a floor and is collected in a sump. A pump sends the slurry mixture back to the spray gun, creating a continuous process. The process generates small volumes of lead slurry that can be solidified and, because it passes the TCLP, is not a mixed waste. The decontaminated lead can be released for recycling

  18. Decontaminating lead bricks and shielding

    International Nuclear Information System (INIS)

    Lussiez, G.W.

    1993-01-01

    Lead used for shielding is often surface contaminated with radioisotopes and is therefore a RCRA D008 mixed waste. The technology-based standard for treatment is macroencapsulation. However, decontaminating and recycling the clean lead is a more attractive solution. Los Alamos National Laboratory decontaminates material and equipment contaminated with radioisotopes. Decontaminating lead poses special problems because of the RCRA hazard classification and the size of the inventory, now about 50 tons and likely to grow substantially because of planned decommissioning operations. This lead, in the form of bricks and other shield shapes, is surface contaminated with fission products. One of the best methods for decontaminating lead is removing the thin superficial layer of contamination with an abrasive medium trader pressure. For lead, a mixture of alumina with water and air at about 40 psig rapidly and effectively decontaminates the lead. The abrasive medium is sprayed onto the lead in a sealed-off area. The slurry of abrasive and particles of lead falls through a floor grating and is collected in a sump. A pump sends the slurry mixture back to the spray gun, creating a continuous process. The process generates small volumes of contaminated lead slurry that can be solidified and, because it passes the TCLP, is not a mixed waste. The decontaminated lead can be released for recycling

  19. Involving Lead Users in Innovation

    DEFF Research Database (Denmark)

    Brem, Alexander; Bilgram, Volker; Gutstein, Adele

    2018-01-01

    Research on the lead user method has been conducted for more than thirty years and has shown that the method is more likely to generate breakthrough innovation than traditional market research tools. Based on a systematic literature review, this paper shows a detailed view on the broad variety...... of research on lead user characteristics, lead user processes, lead user identification and application, and success factors. The main challenge of the lead user method as identified in literature is the resource issue regarding time, manpower, and costs. Also, internal acceptance and the processing...... of the method have been spotted in literature, as well as the intellectual property protection issue. From the starting point of the initial lead user method process introduced by Lüthje and Herstatt (2004), results are integrated into a revisited view on the lead user method process. In addition, concrete...

  20. Large-capacity current leads

    International Nuclear Information System (INIS)

    Ballarino, A.

    2008-01-01

    Feeding superconducting magnets with reliable low-loss devices is a key issue for any cryo-electrical system. Conventional or HTS current leads can be used, and cooling methods, materials, and geometries can be chosen to optimize the thermo-electrical performance of the system. The LHC magnets are powered via more than 3000 current leads transporting altogether about 3 MA of current. With thousands of leads, the LHC lead project represents today the largest project of its kind ever undertaken. Following a review of the LHC lead project, an overview of the choices that can be made for the optimization of large capacity current leads is presented. Examples are given of other leads for large scale magnet systems for which the use of HTS is being envisaged

  1. Agroindustrial Waste for Lead and Chromium Biosorption

    Directory of Open Access Journals (Sweden)

    Susana P. Boeykens

    2018-06-01

    Full Text Available There is a need to re-evaluate the residues generated in industrial processes for the production of new raw material, reducing the volume of waste. In this regard, the biosorption is a low-cost alternative method for treating effluents compared to conventional methods. The main objectives of this research were: the evaluation of the biosorbent capacity of six waste materials for the extraction of chromium(VI and lead(II ions from aqueous solutions and, the determination of the adsorption and kinetic parameters for the more efficient system. The materials evaluated were: peanut shell (Arachis hypagaea, sugarcane bagasse (Saccharum officinarum, avocado peel (Persea americana, pecan nutshell (Carya illinoinensis, wheat bran (Triticum aestivum and banana peel (Mussa paradisiaca. The highest percentage of lead removal was obtained with wheat bran (89%. For chromium, the percentage was generally much lower compared with lead for all tested biosorbents, the banana peel being the most efficient with a 10% removal. The models that better describe the adsorption processes were: Langmuir and Freundlich. The pseudo-second order kinetic model allowed obtaining the parameters for both systems. The equilibrium time, in both systems, was reached after 60 minutes. The study of Fourier Transformed Infrared spectra and the results of desorption experiments allowed to hypothesize on the mechanisms involved in the adsorption of these metals.

  2. Blood lead and lead-210 origins in residents of Toulouse

    International Nuclear Information System (INIS)

    Servant, J.; Delapart, M.

    1981-01-01

    Blood lead and lead-210 analyses were performed on blood samples from non-smoking residents of Toulouse (city of 400,000 inhabitants). Simultaneous surface soil lead content determinations were carried out by the same procedure on rural zone samples of southwestern France. The observed isotopic ratios were compared in order to evaluate food chain contamination. For an average of 19.7 +- 5.8 μg 100 cc -1 of lead in blood, atmospheric contamination amounts to 20%, estimated as follows: 6% from direct inhalation and 14% from dry deposits on vegetation absorbed as food. The natural levels carried over by the food chain reach 14.9 μg 100 cc -1 and have a 210 Pb/Pb concentration ratio of 0.055 dpmμg -1 . These results lead to a maximum value of 15 μg 100 cc -1 for natural lead in human blood according to the ICRP model. (author)

  3. Electroweak interaction parameters

    International Nuclear Information System (INIS)

    Marciano, W.J.

    1984-01-01

    After a presentation of the experimentally determined parameters of the standard SU(3) x SU(2) x U(1) model the author discusses the definition of the Weinberg angle. Then masses and widths of the intermediate vector bosons are considered in the framework of the Weinberg-Salam theory with radiative corrections. Furthermore the radiative decays of these bosons are discussed. Then the relations between the masses of the Higgs boson and the top quark are considered. Thereafter grand unification is briefly discussed with special regards to the SU(5) prediction of some observable parameters. Finally some speculations are made concerning the observation of radiative decays in the UA1 experiments. (HSI)

  4. Band parameters of phosphorene

    International Nuclear Information System (INIS)

    Lew Yan Voon, L C; Wang, J; Zhang, Y; Willatzen, M

    2015-01-01

    Phosphorene is a two-dimensional nanomaterial with a direct band-gap at the Brillouin zone center. In this paper, we present a recently derived effective-mass theory of the band structure in the presence of strain and electric field, based upon group theory. Band parameters for this theory are computed using a first-principles theory based upon the generalized-gradient approximation to the density-functional theory. These parameters and Hamiltonian will be useful for modeling physical properties of phosphorene. (paper)

  5. Band parameters of phosphorene

    DEFF Research Database (Denmark)

    Lew Yan Voon, L. C.; Wang, J.; Zhang, Y.

    2015-01-01

    Phosphorene is a two-dimensional nanomaterial with a direct band-gap at the Brillouin zone center. In this paper, we present a recently derived effective-mass theory of the band structure in the presence of strain and electric field, based upon group theory. Band parameters for this theory...... are computed using a first-principles theory based upon the generalized-gradient approximation to the density-functional theory. These parameters and Hamiltonian will be useful for modeling physical properties of phosphorene....

  6. Lead isotope ratios in artists' lead white: a progress report

    Energy Technology Data Exchange (ETDEWEB)

    Keisch, B; Callahan, R C [Carnegie-Mellon Univ., Pittsburgh, Pa. (USA)

    1976-07-01

    The lead isotope ratios in over four hundred samples of lead white have been determined. The samples represent various geographical sources and dates from the thirteenth century to the present. A new method for organizing this large volume of data is described which helps with the visualization of temporal and geographic patterns. A number of interesting relationships between lead isotope ratio and date or source are shown to exist. Some examples of successful applications of this methodology are described.

  7. Lead isotope ratios in artists' lead white: a progress report

    International Nuclear Information System (INIS)

    Keisch, B.; Callahan, R.C.

    1976-01-01

    The lead isotope ratios in over four hundred samples of lead white have been determined. The samples represent various geographical sources and dates from the thirteenth century to the present. A new method for organizing this large volume of data is described which helps with the visualization of temporal and geographic patterns. A number of interesting relationships between lead isotope ratio and date or source are shown to exist. Some examples of successful applications of this methodology are described. (author)

  8. On the Consistency of Bootstrap Testing for a Parameter on the Boundary of the Parameter Space

    DEFF Research Database (Denmark)

    Cavaliere, Giuseppe; Nielsen, Heino Bohn; Rahbek, Anders

    2017-01-01

    It is well known that with a parameter on the boundary of the parameter space, such as in the classic cases of testing for a zero location parameter or no autoregressive conditional heteroskedasticity (ARCH) effects, the classic nonparametric bootstrap – based on unrestricted parameter estimates...... – leads to inconsistent testing. In contrast, we show here that for the two aforementioned cases, a nonparametric bootstrap test based on parameter estimates obtained under the null – referred to as ‘restricted bootstrap’ – is indeed consistent. While the restricted bootstrap is simple to implement...... in practice, novel theoretical arguments are required in order to establish consistency. In particular, since the bootstrap is analysed both under the null hypothesis and under the alternative, non-standard asymptotic expansions are required to deal with parameters on the boundary. Detailed proofs...

  9. Relative contributions of energy expenditure on physical activity, body composition and weight gain to the evolution of impaired glucose tolerance to Frank diabetes

    International Nuclear Information System (INIS)

    Forrester, T.; Wilks, R.; Jahoor, F.; Adeyemo, A.

    1999-01-01

    In modem technological societies the requirement for physical work is diminished and access to food is unrestricted. Under these circumstances a large proportion of the population will gain weight and develop obesity and diabetes. At the individual level, genetic and behavioural factors must combine to lead to an imbalance between energy intake and its expenditure. Weight gain, especially rapid weight gain in a population appears to increase the risk of diabetes sharply. Thus understanding the route to weight gain and obesity, and the modulatory effects of physical activity on development of glucose intolerance is critical to credible intervention strategies to reverse or prevent diabetes in populations especially those in transitional societies. In this proposal we will examine the quantitative importance of non-resting energy expenditure (EE) in populations with rising levels of obesity and high prevalence of diabetes. (author)

  10. Depressed Frank-Starling mechanism in the left ventricular muscle of the knock-in mouse model of dilated cardiomyopathy with troponin T deletion mutation ΔK210.

    Science.gov (United States)

    Inoue, Takahiro; Kobirumaki-Shimozawa, Fuyu; Kagemoto, Tatsuya; Fujii, Teruyuki; Terui, Takako; Kusakari, Yoichiro; Hongo, Kenichi; Morimoto, Sachio; Ohtsuki, Iwao; Hashimoto, Kazuhiro; Fukuda, Norio

    2013-10-01

    It has been reported that the Frank-Starling mechanism is coordinately regulated in cardiac muscle via thin filament "on-off" equilibrium and titin-based lattice spacing changes. In the present study, we tested the hypothesis that the deletion mutation ΔK210 in the cardiac troponin T gene shifts the equilibrium toward the "off" state and accordingly attenuate the sarcomere length (SL) dependence of active force production, via reduced cross-bridge formation. Confocal imaging in isolated hearts revealed that the cardiomyocytes were enlarged, especially in the longitudinal direction, in ΔK210 hearts, with striation patterns similar to those in wild type (WT) hearts, suggesting that the number of sarcomeres is increased in cardiomyocytes but the sarcomere length remains unaltered. For analysis of the SL dependence of active force, skinned muscle preparations were obtained from the left ventricle of WT and knock-in (ΔK210) mice. An increase in SL from 1.90 to 2.20μm shifted the mid-point (pCa50) of the force-pCa curve leftward by ~0.21pCa units in WT preparations. In ΔK210 muscles, Ca(2+) sensitivity was lower by ~0.37pCa units, and the SL-dependent shift of pCa50, i.e., ΔpCa50, was less pronounced (~0.11pCa units), with and without protein kinase A treatment. The rate of active force redevelopment was lower in ΔK210 preparations than in WT preparations, showing blunted thin filament cooperative activation. An increase in thin filament cooperative activation upon an increase in the fraction of strongly bound cross-bridges by MgADP increased ΔpCa50 to ~0.21pCa units. The depressed Frank-Starling mechanism in ΔK210 hearts is the result of a reduction in thin filament cooperative activation. © 2013.

  11. Sea surface stability parameters

    International Nuclear Information System (INIS)

    Weber, A.H.; Suich, J.E.

    1978-01-01

    A number of studies dealing with climatology of the Northwest Atlantic Ocean have been published in the last ten years. These published studies have dealt with directly measured meteorological parameters, e.g., wind speed, temperature, etc. This information has been useful because of the increased focus on the near coastal zone where man's activities are increasing in magnitude and scope, e.g., offshore power plants, petroleum production, and the subsequent environmental impacts of these activities. Atmospheric transport of passive or nonpassive material is significantly influenced by the turbulence structure of the atmosphere in the region of the atmosphere-ocean interface. This research entails identification of the suitability of standard atmospheric stability parameters which can be used to determine turbulence structure; the calculation of these parameters for the near-shore and continental shelf regions of the U.S. east coast from Cape Hatteras to Miami, Florida; and the preparation of a climatology of these parameters. In addition, a climatology for average surface stress for the same geographical region is being prepared

  12. Measuring the chargino parameters

    Indian Academy of Sciences (India)

    by measuring the cross-sections with polarized beams at e+e- collider ... is given by the fundamental SUSY parameters: the SU(2) gaugino mass Е¾, the higgsino .... two points in the plane which are symmetric under the interchange ¾Д ° ¾К.

  13. General image acquisition parameters

    International Nuclear Information System (INIS)

    Teissier, J.M.; Lopez, F.M.; Langevin, J.F.

    1993-01-01

    The general parameters are of primordial importance to achieve image quality in terms of spatial resolution and contrast. They also play a role in the acquisition time for each sequence. We describe them separately, before associating them in a decision tree gathering the various options that are possible for diagnosis

  14. Quantization of physical parameters

    International Nuclear Information System (INIS)

    Jackiw, R.; Massachusetts Inst. of Tech., Cambridge; Massachusetts Inst. of Tech., Cambridge

    1984-01-01

    Dynamical models are described with parameters (mass, coupling strengths) which must be quantized for quantum mechanical consistency. These and related topological ideas have physical application to phenomenological descriptions of high temperature and low energy quantum chromodynamics, to the nonrelativistic dynamics of magnetic monopoles, and to the quantum Hall effect. (author)

  15. Superconducting magnets and leads thereto

    International Nuclear Information System (INIS)

    Biltcliffe, M.N.; Hanley, P.E.; McKinnon, J.B.; Wheatley, R.W.

    1975-01-01

    The magnet described comprises a cryostat containing a superconducting coil for the generation of a magnetic field, with a short-circuiting superconducting link connected across the coil, and electrical leads extending through the cryostat to the coil; these leads are provided with joints within the cryostat to enable them to be detached from the coil and removed from the cryostat without interrupting the current through the coil, thus reducing heat conduction to the cryostat through the leads. The joints are arranged so that the leads can be readily detached and re-attached to the coil from outside the cryostat. Gas-tight seals are provided where the leads pass through the outer wall of the cryostat, with caps that can be secured after removal of the leads. This kind of magnet can provide a stable magnetic field continuously over long periods, such as is required in nuclear magnetic resonance spectrometers. (U.K.)

  16. Taking the Lead : Gender, Social Context and Preference to Lead

    NARCIS (Netherlands)

    Hong, A.P.C.I.; Schaafsma, J.; van der Wijst, P.J.

    2014-01-01

    Previous research has demonstrated that women tend to emerge as leaders less often than men. In the present study, we examined to what extent women's and men's preference to lead is influenced by social context. It was hypothesized that women have a less strong preference to lead than men in a

  17. Gamma radiation shielding analysis of lead-flyash concretes

    International Nuclear Information System (INIS)

    Singh, Kanwaldeep; Singh, Sukhpal; Dhaliwal, A.S.; Singh, Gurmel

    2015-01-01

    Six samples of lead-flyash concrete were prepared with lead as an admixture and by varying flyash content – 0%, 20%, 30%, 40%, 50% and 60% (by weight) by replacing cement and keeping constant w/c ratio. Different gamma radiation interaction parameters used for radiation shielding design were computed theoretically and measured experimentally at 662 keV, 1173 keV and 1332 keV gamma radiation energy using narrow transmission geometry. The obtained results were compared with ordinary-flyash concretes. The radiation exposure rate of gamma radiation sources used was determined with and without lead-flyash concretes. - Highlights: • Concrete samples with lead as admixture were casted with flyash replacing 0%, 20%, 30%, 40%, 50% and 60% of cement content (by weight). • Gamma radiation shielding parameters of concretes for different gamma ray sources were measured. • The attenuation results of lead-flyash concretes were compared with the results of ordinary flyash concretes

  18. Archives of Atmospheric Lead Pollution

    Science.gov (United States)

    Weiss, Dominik; Shotyk, William; Kempf, Oliver

    Environmental archives such as peat bogs, sediments, corals, trees, polar ice, plant material from herbarium collections, and human tissue material have greatly helped to assess both ancient and recent atmospheric lead deposition and its sources on a regional and global scale. In Europe detectable atmospheric lead pollution began as early as 6000years ago due to enhanced soil dust and agricultural activities, as studies of peat bogs reveal. Increased lead emissions during ancient Greek and Roman times have been recorded and identified in many long-term archives such as lake sediments in Sweden, ice cores in Greenland, and peat bogs in Spain, Switzerland, the United Kingdom, and the Netherlands. For the period since the Industrial Revolution, other archives such as corals, trees, and herbarium collections provide similar chronologies of atmospheric lead pollution, with periods of enhanced lead deposition occurring at the turn of the century and since 1950. The main sources have been industry, including coal burning, ferrous and nonferrous smelting, and open waste incineration until c.1950 and leaded gasoline use since 1950. The greatest lead emissions to the atmosphere all over Europe occurred between 1950 and 1980 due to traffic exhaust. A marked drop in atmospheric lead fluxes found in most archives since the 1980s has been attributed to the phasing out of leaded gasoline. The isotope ratios of lead in the various archives show qualitatively similar temporal changes, for example, the immediate response to the introduction and phasing out of leaded gasoline. Isotope studies largely confirm source assessments based on lead emission inventories and allow the contributions of various anthropogenic sources to be calculated.

  19. Safe leads and lead changes in competitive team sports

    Science.gov (United States)

    Clauset, A.; Kogan, M.; Redner, S.

    2015-06-01

    We investigate the time evolution of lead changes within individual games of competitive team sports. Exploiting ideas from the theory of random walks, the number of lead changes within a single game follows a Gaussian distribution. We show that the probability that the last lead change and the time of the largest lead size are governed by the same arcsine law, a bimodal distribution that diverges at the start and at the end of the game. We also determine the probability that a given lead is "safe" as a function of its size L and game time t . Our predictions generally agree with comprehensive data on more than 1.25 million scoring events in roughly 40 000 games across four professional or semiprofessional team sports, and are more accurate than popular heuristics currently used in sports analytics.

  20. Lead user projects in practice

    DEFF Research Database (Denmark)

    Brem, Alexander; Gutstein, Adele

    2018-01-01

    Earlier research on the lead user method is focused on individual case studies and how the method was applied in a specific context. In this paper, we take a broader approach, analyzing a sample of 24 lead user projects, which included working with 188 lead users. These projects were analyzed....... Moreover, crowdsourcing contests and netnography proved to be of significant value for the need, trend, and lead user identification phases. This paper concludes by discussing theoretical and practical implications, the limitations of this study, and recommendations for future studies....

  1. Decontaminating lead bricks and shielding

    International Nuclear Information System (INIS)

    Lussiez, G.W.

    1993-01-01

    Lead used for shielding is often surface contaminated with radionuclides and is therefore a Resource Conservation and Recovery Act (RCRA) D008 mixed waste. The technology-based standard for treatment is macroencapsulation. However, decontaminating and recycling the clean lead is a more attractive solution. Los Alamos National Lab. decontaminates material and equipment contaminated with radioisotopes. Decontaminating lead poses special problems because of the RCRA hazard classification and the size of the inventory, now about 100 metric tons and likely to grow substantially because of planned decommissioning operations. This lead, in the form of bricks and other shield shapes, is surface contaminated with fission products. One of the best methods for decontaminating lead is removing the thin superficial layer of contamination with an abrasive medium under pressure. For lead, a mixture of alumina with water and air at about 280 kPa (40 psig) rapidly and effectively decontaminates the lead. The abrasive medium is sprayed onto the lead in a sealed-off area. The slurry of abrasive and particles of lead falls through a floor grating and is collected in a pump. A pump sends the slurry mixture back to the spray gun, creating a continuous process

  2. Neurological aspects of lead intoxication

    Energy Technology Data Exchange (ETDEWEB)

    Lehner, H

    1980-05-08

    This study gives a survey over the medical and scientific literature on lead intoxications, which were published until 1979. Neurologic aspects are of particular interest. At present dramatic cases of lead intoxications occur only rarely. However, there are numerous studies about cases of chronical, partly subclinical intoxications. This chronical type of lead intoxication can become manifest clinically as relatively vague symptoms, for example vertigos, insomnia, headaches and weakness. Contrary to this, serious encephalopathies, even with fatal outcome, and polyneuropathies with typical paresis of the radial nerve are preferably observed in acute lead intoxications. Besides the numerous sources of intoxication, also the different opinions found in literature are discussed, concerning the effects of lead on the human body. The fact that there are differing opinions about the limiting value of the blood-lead level at which intoxication symptoms have to be expected, becomes apparent when the determined blood-lead level values are compared and evaluated. Besides the description of general intoxication effects, the discussion of the neurologic aspects found in literature - not only those concerning the central, but also the peripheral system - are preferably concerned. Reports about neuropsychical alterations due to lead exposure, which are mainly found in children, supplement the numerous descriptions of the macroscopic and microscopic alterations of the nervous system provoked by lead. Finally the therapeutic and prophylactic measures given in the literature are discussed.

  3. Lead (Environmental Health Student Portal)

    Science.gov (United States)

    ... Air Pollution Home Indoor Air Pollution Outdoor Air Pollution Particulate Matter Ozone Chemicals Chemicals Home Mercury Lead Arsenic Volatile Organic Compounds Plastics Pesticides Climate Change ...

  4. Erythrocyte fluorescence and lead intoxication.

    Science.gov (United States)

    Clark, K G

    1976-01-01

    Blood samples from people exposed to inorganic lead were examined by fluorescence microscopy for excess erythrocyte porphyrin. With continued lead absorption, fluorescent erythrocytes appeared in the circulation of workers handling this metal or its compounds, and they progressively increased in number and brilliance. These changes ensued if the blood lead concentration was maintained above 2-42 mumol/l (50 mug/100 ml), and preceded any material fall in the haemoglobin value. At one factory, 62-5% of 81 symptomless workers showed erythrocyte fluorescence attributable to the toxic effects of lead. Excess fluorocytes were found in blood samples from a child with pica and three of her eight siblings. These four were subsequently shown to have slightly increased blood lead concentrations (2-03 to 2-32 mumol/l). Fluorescence microscopy for excess erythrocyte porphyrin is a sensitive method for the detection of chronic lead intoxication. A relatively slight increase in the blood lead is associated with demonstrabel changes in erythrocyte porphyrin content. The procedure requires little blood, and may be performed upon stored samples collected for lead estimation. The results are not readily influenced by contamination, and provide good confirmatory evidence for the absorption of biochemically active lead. PMID:963005

  5. Enhanced Leads and Appointment System

    Data.gov (United States)

    Social Security Administration — The data asset contains information on current or upcoming appointments, individuals who will be attending the appointment, potential intent to file a claim (lead),...

  6. Lead Poisoning in Wild Birds

    Science.gov (United States)

    Lahner, Lesanna L.; Franson, J. Christian

    2009-01-01

    Lead in its various forms has been used for thousands of years, originally in cooking utensils and glazes and more recently in many industrial and commercial applications. However, lead is a potent, potentially deadly toxin that damages many organs in the body and can affect all animals, including humans. By the mid 1990s, lead had been removed from many products in the United States, such as paint and fuel, but it is still commonly used in ammunition for hunting upland game birds, small mammals, and large game animals, as well as in fishing tackle. Wild birds, such as mourning doves, bald eagles, California condors, and loons, can die from the ingestion of one lead shot, bullet fragment, or sinker. According to a recent study on loon mortality, nearly half of adult loons found sick or dead during the breeding season in New England were diagnosed with confirmed or suspected lead poisoning from ingestion of lead fishing weights. Recent regulations in some states have restricted the use of lead ammunition on certain upland game hunting areas, as well as lead fishing tackle in areas frequented by common loons and trumpeter swans. A variety of alternatives to lead are available for use in hunting, shooting sports, and fishing activities.

  7. In vivo x-ray fluorescence of bone lead in the study of human lead metabolism: Serum lead, whole blood lead, bone lead, and cumulative exposure

    International Nuclear Information System (INIS)

    Cake, K.M.; Chettle, D.R.; Webber, C.E.; Gordon, C.L.

    1995-01-01

    Traditionally, clinical studies of lead's effect on health have relied on blood lead levels to indicate lead exposure. However, this is unsatisfactory because blood lead levels have a half-life of approximately 5 weeks, and thus reflect recent exposure. Over 90% of the lead body burden is in bone, and it is thought to have a long residence time, thus implying that measurements of bone lead reflect cumulative exposure. So, measurements of bone lead are useful in understanding the long-term health effects of lead. Ahlgren reported the first noninvasive measurements of bone lead in humans, where γ-rays from 57 Co were used to excite the K series x-rays of lead. The lead detection system at McMaster University uses a 109 Cd source which is positioned at the center of the detector face (HPGe) and a near backscatter (∼160 degrees) geometry. This arrangement allows great flexibility, since one can sample lead in a range of different bone sites due to a robust normalization technique which eliminates the need to correct for bone geometry, thickness of overlying tissue, and other related factors. The effective radiation dose to an adult during an x-ray fluorescence bone lead measurement is extremely low, being 35 nSv. This paper addresses the issue of how bone, whole blood, and serum lead concentrations can be related in order to understand a person's lead exposure history

  8. Optomechanical parameter estimation

    International Nuclear Information System (INIS)

    Ang, Shan Zheng; Tsang, Mankei; Harris, Glen I; Bowen, Warwick P

    2013-01-01

    We propose a statistical framework for the problem of parameter estimation from a noisy optomechanical system. The Cramér–Rao lower bound on the estimation errors in the long-time limit is derived and compared with the errors of radiometer and expectation–maximization (EM) algorithms in the estimation of the force noise power. When applied to experimental data, the EM estimator is found to have the lowest error and follow the Cramér–Rao bound most closely. Our analytic results are envisioned to be valuable to optomechanical experiment design, while the EM algorithm, with its ability to estimate most of the system parameters, is envisioned to be useful for optomechanical sensing, atomic magnetometry and fundamental tests of quantum mechanics. (paper)

  9. Critical parameters for ammonia

    International Nuclear Information System (INIS)

    Sato, M.; Masui, G.; Uematsu, M.

    2005-01-01

    (p, ρ, T) measurements and visual observations of the meniscus for ammonia were carried out carefully in the critical region over the range of temperatures: -1 K (T - T c ) 0.04 K, and of densities: -19 kg . m -3 (ρ - ρ c ) 19 kg . m -3 by a metal-bellows volumometer with an optical cell. Vapor pressures were also measured at T = (310, 350, and 400) K. The critical parameters of T c and ρ c were determined based on the results of observation of the critical opalescence. The critical pressure p c was determined from the present measurements at T c on the vapor pressure curve. Comparisons of the critical parameters with values given in the literature are presented

  10. Critical parameters for ammonia

    Energy Technology Data Exchange (ETDEWEB)

    Sato, M. [Center for Mechanical Engineering and Applied Mechanics, Keio University, Hiyoshi 3-14-1, Kohoku-ku, Yokohama 223-8522 (Japan); Masui, G. [Center for Mechanical Engineering and Applied Mechanics, Keio University, Hiyoshi 3-14-1, Kohoku-ku, Yokohama 223-8522 (Japan); Uematsu, M. [Center for Mechanical Engineering and Applied Mechanics, Keio University, Hiyoshi 3-14-1, Kohoku-ku, Yokohama 223-8522 (Japan)]. E-mail: uematsu@mech.keio.ac.jp

    2005-09-15

    (p, {rho}, T) measurements and visual observations of the meniscus for ammonia were carried out carefully in the critical region over the range of temperatures: -1 K (T - T {sub c}) 0.04 K, and of densities: -19 kg . m{sup -3} ({rho} - {rho} {sub c}) 19 kg . m{sup -3} by a metal-bellows volumometer with an optical cell. Vapor pressures were also measured at T = (310, 350, and 400) K. The critical parameters of T {sub c} and {rho} {sub c} were determined based on the results of observation of the critical opalescence. The critical pressure p {sub c} was determined from the present measurements at T {sub c} on the vapor pressure curve. Comparisons of the critical parameters with values given in the literature are presented.

  11. LMFBR plant parameters

    International Nuclear Information System (INIS)

    1979-03-01

    This document contains up-to-date data on existing or firmly decided prototype or demonstration LMFBR reactors (Table I), on planned commercial size LMFBR according to the present status of design (Table II) and on experimental fast reactors such as BOR-60, DFR, EBR-II, FERMI, FFTF, JOYO, KNK-II, PEC, RAPSODIE-FORTISSIMO (Table III). Only corrected and revised parameters submitted by the countries participating in the IWGFR are included in this document

  12. Ranking as parameter estimation

    Czech Academy of Sciences Publication Activity Database

    Kárný, Miroslav; Guy, Tatiana Valentine

    2009-01-01

    Roč. 4, č. 2 (2009), s. 142-158 ISSN 1745-7645 R&D Projects: GA MŠk 2C06001; GA AV ČR 1ET100750401; GA MŠk 1M0572 Institutional research plan: CEZ:AV0Z10750506 Keywords : ranking * Bayesian estimation * negotiation * modelling Subject RIV: BB - Applied Statistics, Operational Research http://library.utia.cas.cz/separaty/2009/AS/karny- ranking as parameter estimation.pdf

  13. Calculation of shielding parameters

    International Nuclear Information System (INIS)

    Montoya Z, J.

    1994-01-01

    With the propose of reduce the hazard to radiation, exist three basic factors: a) time, the time to exposition to working person inside to area, from exist determined speed the doses, is proportional of the time permanence; b) distance, the reduce to doses is inverse square of the distance to exposition point; c) building, consist to interpose between source and exposition point to material. The main aspect development to the analysis of parameters distance and building. The analysis consist to development of the mathematical implicit, in the model of source radioactive, beginning with the geometry to source, distance to exposition source, and configuration building. In the final part was realize one comparative studied to calculus of parameters to blinding, employs two codes CPBGAM and MICROSHIELD, the first made as part to work thesis. The point source its a good approximation to any one real source, but in the majority of the time to propose analysis the spatial distribution of the source must realized in explicit way. The buildings calculus in volumetry's source can be approximate begin's of plan as source adaptations. It's important to have present that not only the building exist the exposition to the radiation, and the parameters time and distance plays an important paper too. (Author)

  14. LMFBR plant parameters 1991

    International Nuclear Information System (INIS)

    1991-03-01

    The document has been prepared on the basis of information provided by the members of the IAEA International Working Group on Fast Reactors (IWGFR). It contains updated parameters of 27 experimental, prototype and commercial size liquid metal fast breeder reactors (LMFBRs). Most of the reactors are currently in operation, under construction or in an advanced planning stage. Parameters of the Clinch River Breeder Reactor (USA), PEC (Italy), RAPSODIE (France), DFR (UK) and EFFBR (USA) are included in the report because of their important role in the development of LMFBR technology from first LMFBRs to the prototype size fast reactors. Two more reactors appeared in the list: European Fast Reactor (EFR) and PRISM (USA). Parameters of these reactors included in this publication are based on the data from the papers presented at the 23rd Annual Meeting of the IWGFR. All in all more than four hundred corrections and additions have been made to update the document. The report is intended for specialists and institutions in industrialized and developing countries who are responsible for the design and operation of liquid metal fast breeder reactors

  15. MFV Reductions of MSSM Parameter Space

    CERN Document Server

    AbdusSalam, S.S.; Quevedo, F.

    2015-01-01

    The 100+ free parameters of the minimal supersymmetric standard model (MSSM) make it computationally difficult to compare systematically with data, motivating the study of specific parameter reductions such as the cMSSM and pMSSM. Here we instead study the reductions of parameter space implied by using minimal flavour violation (MFV) to organise the R-parity conserving MSSM, with a view towards systematically building in constraints on flavour-violating physics. Within this framework the space of parameters is reduced by expanding soft supersymmetry-breaking terms in powers of the Cabibbo angle, leading to a 24-, 30- or 42-parameter framework (which we call MSSM-24, MSSM-30, and MSSM-42 respectively), depending on the order kept in the expansion. We provide a Bayesian global fit to data of the MSSM-30 parameter set to show that this is manageable with current tools. We compare the MFV reductions to the 19-parameter pMSSM choice and show that the pMSSM is not contained as a subset. The MSSM-30 analysis favours...

  16. Leading change: a concept analysis.

    Science.gov (United States)

    Nelson-Brantley, Heather V; Ford, Debra J

    2017-04-01

    To report an analysis of the concept of leading change. Nurses have been called to lead change to advance the health of individuals, populations, and systems. Conceptual clarity about leading change in the context of nursing and healthcare systems provides an empirical direction for future research and theory development that can advance the science of leadership studies in nursing. Concept analysis. CINAHL, PubMed, PsycINFO, Psychology and Behavioral Sciences Collection, Health Business Elite and Business Source Premier databases were searched using the terms: leading change, transformation, reform, leadership and change. Literature published in English from 2001 - 2015 in the fields of nursing, medicine, organizational studies, business, education, psychology or sociology were included. Walker and Avant's method was used to identify descriptions, antecedents, consequences and empirical referents of the concept. Model, related and contrary cases were developed. Five defining attributes of leading change were identified: (a) individual and collective leadership; (b) operational support; (c) fostering relationships; (d) organizational learning; and (e) balance. Antecedents were external or internal driving forces and organizational readiness. The consequences of leading change included improved organizational performance and outcomes and new organizational culture and values. A theoretical definition and conceptual model of leading change were developed. Future studies that use and test the model may contribute to the refinement of a middle-range theory to advance nursing leadership research and education. From this, empirically derived interventions that prepare and enable nurses to lead change to advance health may be realized. © 2016 John Wiley & Sons Ltd.

  17. Lead poisoning from souvenir earthenware.

    Science.gov (United States)

    Hellström-Lindberg, Eva; Björklund, Andreas; Karlson-Stiber, Christine; Harper, Pauline; Seldén, Anders I

    2006-02-01

    A case of massive lead poisoning from juice contained in a Greek earthenware jug as well as six satellite cases of high lead exposure of similar origin is reported. The intoxicated patient was successfully treated with dimercaptosuccinic acid. Ceramic producers should adhere to the longstanding European legislation.

  18. Lead-free primary explosives

    Science.gov (United States)

    Huynh, My Hang V.

    2010-06-22

    Lead-free primary explosives of the formula (cat).sub.Y[M.sup.II(T).sub.X(H.sub.2O).sub.6-X].sub.Z, where T is 5-nitrotetrazolate, and syntheses thereof are described. Substantially stoichiometric equivalents of the reactants lead to high yields of pure compositions thereby avoiding dangerous purification steps.

  19. Blood Test: Lead (For Parents)

    Science.gov (United States)

    ... Staying Safe Videos for Educators Search English Español Blood Test: Lead KidsHealth / For Parents / Blood Test: Lead What's ... español Análisis de sangre: plomo What Is a Blood Test? A blood test is when a sample of ...

  20. Neutronic design for a 100MWth Small modular natural circulation lead or lead-alloy cooled fast reactors core

    International Nuclear Information System (INIS)

    Chen, C.; Chen, H.; Zhang, H.; Chen, Z.; Zeng, Q.

    2015-01-01

    Lead or lead-alloy cooled fast reactor with good fuel proliferation and nuclear waste transmutation capability, as well as high security and economy, is a great potential for the development of fourth-generation nuclear energy systems. Small natural circulation reactor is an important technical route lead cooled fast reactors industrial applications, which has been chosen as one of the three reference technical for solution lead or lead-alloy cooled fast reactors by GIF lead-cooled fast reactor steering committee. The School of Nuclear Science and Technology of USTC proposed a small 100MW th natural circulation lead cooled fast reactor concept called SNCLFR-100 based realistic technology. This article describes the SNCLFR-100 reactor of the overall technical program, core physics calculation and analysis. The results show that: SNCLFR-100 with good neutronic and safety performance and relevant design parameters meet the security requirements with feasibility. (author)

  1. Photocatalyzed removal of lead ion from lead-chelator solution

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Young Hyun; Na, Jung Won; Sung, Ki Woung [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1994-07-01

    The present study was undertaken to examine the influence of such chelating agents on the ease and speed of photocatalyzed metal removal and deposition. With excess EDTA, the free EDTA competes with Pb for oxidation, and at a ten fold excess, no lead oxidation (hence removal) occurs. With insufficient EDTA, the corresponding initial concentration of Pb-EDTA is decreased; after its destruction, the remaining Pb{sup 2+} is removed more slowly, at rates found with lead nitrate solution. The net result is that the maximum rate of lead deposition occurs at the stoichiometric ratio of 1:1 EDTA : Pb{sup 2+}.

  2. ATLAS parameter study

    International Nuclear Information System (INIS)

    Adler, R.J.

    1994-01-01

    The purpose of this study is to make an independent assessment on the parameters chosen for the ATLAS capacitor bank at LANL. The contractor will perform a study of the basic pulsed power parameters of the ATLAS device with baseline functional parameters of >25 MA implosion current and <2.5 microsecond current risetime. Nominal circuit parameters held fixed will be the 14 nH from the vacuum interface to the load, and the nominal load impedances of 1 milliohm for slow loads and 10 milliohms for fast loads. Single Ended designs, as opposed to bipolar designs, will be studied in detail. The ATLAS pulsed power design problem is about inductance. The reason that a 36 MJ bank is required is that such a bank has enough individual capacitors so that the parallel inductance is acceptably low. Since about half the inductance is in the bank, and the inductance and time constant of the submodules is fixed, the variation of output with a given parameter will generally be a weak one. In general, the dl/dt calculation demonstrates that for the real system inductances, 700 kV is the optimum voltage for the bank to drive X-ray loads. The optimum is broad, and there is little reduction in performance at voltages as low as 450 kV. The direct drive velocity analysis also shows that the optimum velocity is between 480 and 800 kV for a variety of assumptions, and that there is less than a 10% variation in velocity over this range. Voltages in the 120 kV--600 kV range are desirable for driving heavy liners. A compromise optimum operating point might be 480 kV, at which all X-ray operation scenarios are within 10% of their velocity optimum, and heavy liners can be configured to be near optimum if small enough. Based on very preliminary studies the author believes that the choice of a single operating voltage point (say, 480 kV) is unnecessary, and that a bank engineered for dual operation at 480 and 240 kV will be the best solution to the ATLAS problem

  3. Effect of Glycine on Lead Mobilization, Lead-Induced Oxidative Stress, and Hepatic Toxicity in Rats

    Directory of Open Access Journals (Sweden)

    Yolanda Alcaraz-Contreras

    2011-01-01

    Full Text Available The effectiveness of glycine in treating experimental lead intoxication was examined in rats. Male Wistar rats were exposed to 3 g/L lead acetate in drinking water for 5 weeks and treated thereafter with glycine (100 and 500 mg/kg, orally once daily for 5 days or glycine (1000 mg/kg, orally once daily for 28 days. The effect of these treatments on parameters indicative of oxidative stress (glutathione and malondialdehyde levels, the activity of blood -aminolevulinic acid dehydratase, and lead concentration in blood, liver, kidney, brain, and bone were investigated. Liver samples were observed for histopathological changes. Glycine was found to be effective in (1 increasing glutathione levels; (2 reducing malondialdehyde levels; (3 decreasing lead levels in bone with the highest dose. However, glycine had no effect on lead mobilization when 100 and 500 mg/kg glycine were administered. In microscopic examination, glycine showed a protective effect against lead intoxication.

  4. Distribution of lead in teeth

    Energy Technology Data Exchange (ETDEWEB)

    Fremlin, J H; Tanti-Wipawin, W [Birmingham Univ. (UK). Dept. of Physics

    1976-07-01

    There is currently much concern with the amount of lead in the environment. Measurement of lead in teeth is being used to give information on the integrated uptake of lead by the individual over a period. The distribution of lead within individual teeth, is examined with the object of distinguishing lead deposited during formation or calcification from that taken up by the tooth over its working life after eruption. A tooth is sectioned and bombarded with 30-MeV ions of helium-3 from the Birmingham 1.52-m cyclotron, which produces polonium isotopes. The main useful activity is due to polonium-206, an ..cap alpha.. emitter, half-life 8 d. These ..cap alpha.. particles can be recorded by a plastic solid-state track detector.

  5. Distribution of lead in teeth

    International Nuclear Information System (INIS)

    Fremlin, J.H.; Tanti-Wipawin, W.

    1976-01-01

    There is currently much concern with the amount of lead in the environment. Measurement of lead in teeth is being used to give information on the integrated uptake of lead by the individual over a period. The distribution of lead within individual teeth, is examined with the object of distinguishing lead deposited during formation or calcification from that taken up by the tooth over its working life after eruption. A tooth is sectioned and bombarded with 30-MeV ions of helium-3 from the Birmingham 1.52-m cyclotron, which produces polonium isotopes. The main useful activity is due to polonium-206, an α emitter, half-life 8 d. These α particles can be recorded by a plastic solid-state track detector. (U.K.)

  6. Biosorption of lead phosphates by lead-tolerant bacteria as a mechanism for lead immobilization.

    Science.gov (United States)

    Rodríguez-Sánchez, Viridiana; Guzmán-Moreno, Jesús; Rodríguez-González, Vicente; Flores-de la Torre, Juan Armando; Ramírez-Santoyo, Rosa María; Vidales-Rodríguez, Luz Elena

    2017-08-01

    The study of metal-tolerant bacteria is important for bioremediation of contaminated environments and development of green technologies for material synthesis due to their potential to transform toxic metal ions into less toxic compounds by mechanisms such as reduction, oxidation and/or sequestration. In this study, we report the isolation of seven lead-tolerant bacteria from a metal-contaminated site at Zacatecas, México. The bacteria were identified as members of the Staphylococcus and Bacillus genera by microscopic, biochemical and 16S rDNA analyses. Minimal inhibitory concentration of these isolates was established between 4.5 and 7.0 mM of Pb(NO 3 ) 2 in solid and 1.0-4.0 mM of Pb(NO 3 ) 2 in liquid media. A quantitative analysis of the lead associated to bacterial biomass in growing cultures, revealed that the percentage of lead associated to biomass was between 1 and 37% in the PbT isolates. A mechanism of complexation/biosorption of lead ions as inorganic phosphates (lead hydroxyapatite and pyromorphite) in bacterial biomass, was determined by Fourier transform infrared spectroscopy and X-ray diffraction analyses. Thus, the ability of the lead-tolerant isolates to transform lead ions into stable and highly insoluble lead minerals make them potentially useful for immobilization of lead in mining waste.

  7. Environmental lead hazard to children.

    Science.gov (United States)

    Mittal, S K

    1992-01-01

    Clinically evident lead poisoning is rare in Indian children but is more common than in adults. In children, lead poisoning may appear as fever, seizures, anemia, or abdominal pain, while in adults it is more likely to manifest as chronic minor peripheral neuropathy or gum pigmentation. Children with acute lead poisoning can be treated with chelators such as EDTA and BAL, but many are left with permanent brain damage. The most common sources of acute lead poisoning in Indian children are inhalation of fumes from burned car batteries, ingestion of flaking paint, consuming food cooked in cheap aluminum or brass utensils, and eating contaminated soil. The sources of chronic lead poisoning are water from lead pipes and fumes from industrial or automotive exhaust. Another common source in India is application of "kajjal" to children's eyes. Sources of lead in Western countries, such as drinking water, canned food, residential paint, automotive fuel, and ambient air quality, are regulated by law. None of these are regulated in India.

  8. Radiation portal evaluation parameters

    International Nuclear Information System (INIS)

    York, R.L.

    1998-01-01

    The detection of the unauthorized movement of radioactive materials is one of the most effective nonproliferation measures. Automatic special nuclear material (SNM) portal monitors are designed to detect this unauthorized movement and are an important part of the safeguard systems at US nuclear facilities. SNM portals differ from contamination monitors because they are designed to have high sensitivity for the low energy gamma-rays associated with highly enriched uranium (HEU) and plutonium. These instruments are now being installed at international borders to prevent the spread of radioactive contamination an SNM. In this paper the parameters important to evaluating radiation portal monitors are discussed. (author)

  9. Buncher system parameter optimization

    International Nuclear Information System (INIS)

    Wadlinger, E.A.

    1981-01-01

    A least-squares algorithm is presented to calculate the RF amplitudes and cavity spacings for a series of buncher cavities each resonating at a frequency that is a multiple of a fundamental frequency of interest. The longitudinal phase-space distribution, obtained by particle tracing through the bunching system, is compared to a desired distribution function of energy and phase. The buncher cavity parameters are adjusted to minimize the difference between these two distributions. Examples are given for zero space charge. The manner in which the method can be extended to include space charge using the 3-D space-charge calculation procedure is indicated

  10. Infrared Drying Parameter Optimization

    Science.gov (United States)

    Jackson, Matthew R.

    In recent years, much research has been done to explore direct printing methods, such as screen and inkjet printing, as alternatives to the traditional lithographic process. The primary motivation is reduction of the material costs associated with producing common electronic devices. Much of this research has focused on developing inkjet or screen paste formulations that can be printed on a variety of substrates, and which have similar conductivity performance to the materials currently used in the manufacturing of circuit boards and other electronic devices. Very little research has been done to develop a process that would use direct printing methods to manufacture electronic devices in high volumes. This study focuses on developing and optimizing a drying process for conductive copper ink in a high volume manufacturing setting. Using an infrared (IR) dryer, it was determined that conductive copper prints could be dried in seconds or minutes as opposed to tens of minutes or hours that it would take with other drying devices, such as a vacuum oven. In addition, this study also identifies significant parameters that can affect the conductivity of IR dried prints. Using designed experiments and statistical analysis; the dryer parameters were optimized to produce the best conductivity performance for a specific ink formulation and substrate combination. It was determined that for an ethylene glycol, butanol, 1-methoxy 2- propanol ink formulation printed on Kapton, the optimal drying parameters consisted of a dryer height of 4 inches, a temperature setting between 190 - 200°C, and a dry time of 50-65 seconds depending on the printed film thickness as determined by the number of print passes. It is important to note that these parameters are optimized specifically for the ink formulation and substrate used in this study. There is still much research that needs to be done into optimizing the IR dryer for different ink substrate combinations, as well as developing a

  11. LMFBR plant parameters

    International Nuclear Information System (INIS)

    1985-07-01

    This document has been prepared on the basis of information compiled by the members of the IAEA International Working Group on Fast Reactors (IWGFR). It contains parameters of 25 experimental, prototype and commercial size liquid metal fast breeder reactors (LMFBR). Most of the reactors are currently in operation, under construction or in an advanced planning stage. Parameters of the Clinch River Breeder Reactor (USA) are presented because its design was nearly finished and most of the components were fabricated at the time when the project was terminated. Three reactors (RAPSODIE (France), DFR (UK) and EFFBR (USA)) have been shut down. However, they are included in the report because of their important role in the development of LMFBR technology from first LMFBRs to the prototype size fast reactors. The first LMFBRs (CLEMENTINE (USA), EBR-1 (USA), BR-2 (USSR), BR-5 (USSR)) and very special reactors (LAMPRE (USA), SEFOR (USA)) were not recommended by the members of the IWGFR to be included in the report

  12. Variation of Parameters in Differential Equations (A Variation in Making Sense of Variation of Parameters)

    Science.gov (United States)

    Quinn, Terry; Rai, Sanjay

    2012-01-01

    The method of variation of parameters can be found in most undergraduate textbooks on differential equations. The method leads to solutions of the non-homogeneous equation of the form y = u[subscript 1]y[subscript 1] + u[subscript 2]y[subscript 2], a sum of function products using solutions to the homogeneous equation y[subscript 1] and…

  13. Water quality criteria for lead

    Energy Technology Data Exchange (ETDEWEB)

    Nagpal, N.K.

    1987-01-01

    This report is one in a series that establishes water quality criteria for British Columbia. The report sets criteria for lead to protect a number of water uses, including drinking water, freshwater and marine aquatic life, wildlife, livestock, irrigation, and recreation. The criteria are set as either maximum concentrations of total lead that should not be exceeded at any time, or average concentrations that should not be exceeded over a 30-day period. Actual values are summarized.

  14. Chronic lead intoxication in calves

    Energy Technology Data Exchange (ETDEWEB)

    Wagenaar, G

    1963-01-01

    Four calves born in the winter of 1961-1962 died on a farm after a disease which had run its course for periods ranging from six weeks to a few months. A calf had also died showing similar symptoms during the previous year. All calves showed identical symptoms. Initially, their liveliness diminished; subsequently, they drank less and showed signs of pica. They finally died after the disease had run its course for about six weeks. The last calf, born late in February 1962, was in poor health as early as May, improved slightly when it had been sent out to grass but died in September, having fallen ill again in August. Autopsy was performed on three calves; all three were affected with chronic interstitial nephritis and uraemic endocarditis of the left auricle was present as well. The results obtained on toxicological investigation were indicative of lead poisoning. The liver of the calf was found to contain two mg of lead per kg, the cortex of the kidney containing twenty-five mg of lead per kg. These figures did not provide direct evidence of lead poisoning, but in evaluating these figures the fact was taken into account that the calf had no longer been able to ingest any lead for several months. Meanwhile, it was found that the stock-owner had fitted an old painted door in the calf-shed, which door was constantly being licked by the calves. The paint contained 18.6% of lead. This finding was followed by examination of the liver of a calf that had died previously. It was found to contain 49.7 mg of lead per kg. Accordingly, the calves had been affected with a form of lead poisoning running a relatively slow course, as a result of which the animals had developed chronic interstitial nephritis. The calves eventually died from uraemia. 4 references.

  15. Display Parameters and Requirements

    Science.gov (United States)

    Bahadur, Birendra

    The following sections are included: * INTRODUCTION * HUMAN FACTORS * Anthropometry * Sensory * Cognitive * Discussions * THE HUMAN VISUAL SYSTEM - CAPABILITIES AND LIMITATIONS * Cornea * Pupil and Iris * Lens * Vitreous Humor * Retina * RODS - NIGHT VISION * CONES - DAY VISION * RODS AND CONES - TWILIGHT VISION * VISUAL PIGMENTS * MACULA * BLOOD * CHOROID COAT * Visual Signal Processing * Pathways to the Brain * Spatial Vision * Temporal Vision * Colour Vision * Colour Blindness * DICHROMATISM * Protanopia * Deuteranopia * Tritanopia * ANOMALOUS TRICHROMATISM * Protanomaly * Deuteranomaly * Tritanomaly * CONE MONOCHROMATISM * ROD MONOCHROMATISM * Using Colour Effectively * COLOUR MIXTURES AND THE CHROMATICITY DIAGRAM * Colour Matching Functions and Chromaticity Co-ordinates * CIE 1931 Colour Space * CIE PRIMARIES * CIE COLOUR MATCHING FUNCTIONS AND CHROMATICITY CO-ORDINATES * METHODS FOR DETERMINING TRISTIMULUS VALUES AND COLOUR CO-ORDINATES * Spectral Power Distribution Method * Filter Method * CIE 1931 CHROMATICITY DIAGRAM * ADDITIVE COLOUR MIXTURE * CIE 1976 Chromaticity Diagram * CIE Uniform Colour Spaces and Colour Difference Formulae * CIELUV OR L*u*v* * CIELAB OR L*a*b* * CIE COLOUR DIFFERENCE FORMULAE * Colour Temperature and CIE Standard Illuminants and source * RADIOMETRIC AND PHOTOMETRIC QUANTITIES * Photopic (Vλ and Scotopic (Vλ') Luminous Efficiency Function * Photometric and Radiometric Flux * Luminous and Radiant Intensities * Incidence: Illuminance and Irradiance * Exitance or Emittance (M) * Luminance and Radiance * ERGONOMIC REQUIREMENTS OF DISPLAYS * ELECTRO-OPTICAL PARAMETERS AND REQUIREMENTS * Contrast and Contrast Ratio * Luminance and Brightness * Colour Contrast and Chromaticity * Glare * Other Aspects of Legibility * SHAPE AND SIZE OF CHARACTERS * DEFECTS AND BLEMISHES * FLICKER AND DISTORTION * ANGLE OF VIEW * Switching Speed * Threshold and Threshold Characteristic * Measurement Techniques For Electro-optical Parameters * RADIOMETRIC

  16. Effect of lead acetate on neurobehavioral development of rats

    Directory of Open Access Journals (Sweden)

    Mello C.F.

    1998-01-01

    Full Text Available We investigated the effects of lead exposure during the pre- and postnatal period on the neurobehavioral development of female Wistar rats (70-75 days of age, 120-150 g using a protocol of lead intoxication that does not affect weight gain. Wistar rats were submitted to lead acetate intoxication by giving their dams 1.0 mM lead acetate. Control dams received deionized water. Growth and neuromotor development were assessed by monitoring daily the following parameters in 20 litters: body weight, ear unfolding, incisor eruption, eye opening, righting, palmar grasp, negative geotaxis, cliff avoidance and startle reflex. Spontaneous alternation was assessed on postnatal day 17 using a T maze. The animals' ability to equilibrate on a beaker rim was measured on postnatal day 19. Lead intoxication was confirmed by measuring renal, hepatic and cerebral lead concentration in dams and litters. Lead treatment hastened the day of appearance of the following parameters: eye opening (control: 13.5 ± 0.6, N = 88; lead: 12.9 ± 0.6, N = 72; P<0.05, startle reflex (control: 13.0 ± 0.8, N = 88; lead: 12.0 ± 0.7, N = 72; P<0.05 and negative geotaxis. On the other hand, spontaneous alternation performance was hindered in lead-exposed animals (control: 37.6 ± 19.7; lead: 57.5 ± 28.3% of alternating animals; P<0.05. These results suggest that lead exposure without concomitant undernutrition alters rat development, affecting specific subsets of motor skills.

  17. Timetable Attractiveness Parameters

    DEFF Research Database (Denmark)

    Schittenhelm, Bernd

    2008-01-01

    Timetable attractiveness is influenced by a set of key parameters that are described in this article. Regarding the superior structure of the timetable, the trend in Europe goes towards periodic regular interval timetables. Regular departures and focus on optimal transfer possibilities make...... these timetables attractive. The travel time in the timetable depends on the characteristics of the infrastructure and rolling stock, the heterogeneity of the planned train traffic and the necessary number of transfers on the passenger’s journey. Planned interdependencies between trains, such as transfers...... and heterogeneous traffic, add complexity to the timetable. The risk of spreading initial delays to other trains and parts of the network increases with the level of timetable complexity....

  18. Parameter measurement of target

    International Nuclear Information System (INIS)

    Gao Dangzhong

    2001-01-01

    The progress of parameter measurement of target (ICF-15) in 1999 are presented, including the design and contract of the microsphere equator profiler, the precise air bearing manufacturing, high-resolution X-ray image of multi-layer shells and the X-ray photos processed with special image and data software, some plastic shells measured in precision of 0.3 μm, the high-resolution observation and photograph system of 'dew-point method', special fixture of target and its temperature distribution measuring, the dew-point temperature and fuel gas pressure of shells measuring with internal pressure of 5 - 15 (x10 5 ) Pa D 2 and wall thickness of 1.5∼3 μm

  19. Safety Parameters Graphical Interface

    International Nuclear Information System (INIS)

    Canamero, B.

    1998-01-01

    Nuclear power plant data are received at the Operations Center of the Consejo de Seguridad Nuclear in emergency situations. In order to achieve the required interface and to prepare those data to perform simulation and forecasting with already existing computer codes a Safety Parameters Graphical Interface (IGPS) has been developed. The system runs in a UNIX environment and use the Xwindows capabilities. The received data are stored in such a way that it can be easily used for further analysis and training activities. The system consists of task-oriented modules (processes) which communicate each other using well known UNIX mechanisms (signals, sockets and shared memory segments). IGPS conceptually have two different parts: Data collection and preparation, and Data monitorization. (Author)

  20. Process Damping Parameters

    International Nuclear Information System (INIS)

    Turner, Sam

    2011-01-01

    The phenomenon of process damping as a stabilising effect in milling has been encountered by machinists since milling and turning began. It is of great importance when milling aerospace alloys where maximum surface speed is limited by excessive tool wear and high speed stability lobes cannot be attained. Much of the established research into regenerative chatter and chatter avoidance has focussed on stability lobe theory with different analytical and time domain models developed to expand on the theory first developed by Trusty and Tobias. Process damping is a stabilising effect that occurs when the surface speed is low relative to the dominant natural frequency of the system and has been less successfully modelled and understood. Process damping is believed to be influenced by the interference of the relief face of the cutting tool with the waveform traced on the cut surface, with material properties and the relief geometry of the tool believed to be key factors governing performance. This study combines experimental trials with Finite Element (FE) simulation in an attempt to identify and understand the key factors influencing process damping performance in titanium milling. Rake angle, relief angle and chip thickness are the variables considered experimentally with the FE study looking at average radial and tangential forces and surface compressive stress. For the experimental study a technique is developed to identify the critical process damping wavelength as a means of measuring process damping performance. For the range of parameters studied, chip thickness is found to be the dominant factor with maximum stable parameters increased by a factor of 17 in the best case. Within the range studied, relief angle was found to have a lesser effect than expected whilst rake angle had an influence.

  1. Neglect Of Parameter Estimation Uncertainty Can Significantly Overestimate Structural Reliability

    Directory of Open Access Journals (Sweden)

    Rózsás Árpád

    2015-12-01

    Full Text Available Parameter estimation uncertainty is often neglected in reliability studies, i.e. point estimates of distribution parameters are used for representative fractiles, and in probabilistic models. A numerical example examines the effect of this uncertainty on structural reliability using Bayesian statistics. The study reveals that the neglect of parameter estimation uncertainty might lead to an order of magnitude underestimation of failure probability.

  2. Optimizing chirped laser pulse parameters for electron acceleration in vacuum

    Energy Technology Data Exchange (ETDEWEB)

    Akhyani, Mina; Jahangiri, Fazel; Niknam, Ali Reza; Massudi, Reza, E-mail: r-massudi@sbu.ac.ir [Laser and Plasma Research Institute, Shahid Beheshti University, Tehran 1983969411 (Iran, Islamic Republic of)

    2015-11-14

    Electron dynamics in the field of a chirped linearly polarized laser pulse is investigated. Variations of electron energy gain versus chirp parameter, time duration, and initial phase of laser pulse are studied. Based on maximizing laser pulse asymmetry, a numerical optimization procedure is presented, which leads to the elimination of rapid fluctuations of gain versus the chirp parameter. Instead, a smooth variation is observed that considerably reduces the accuracy required for experimentally adjusting the chirp parameter.

  3. Establishing Priorities for Acquiring Natural Resources Data Parameters

    Science.gov (United States)

    1981-11-01

    but would significantly reduce its effectiveness. 5. Information which the lack of would terminate or render totally inef- fective a management program...the Interior, 1977). In the Beginning: An Introduction to Archeology (Little, Brown and Co., 1978). Hole, Frank and Robert H. Heizer , An Introduction

  4. Lead isotope in mineral exploration

    International Nuclear Information System (INIS)

    Gulson, B.L.

    1986-01-01

    This book provides an up-to-date state-of-the-art review of lead isotopes in mineral exploration. Beginning with an historical review on suggested uses of lead isotopes in mineral exploration, the author then outlines the theoretical aspects of lead isotopes and illustrates that the method is based on well-known principles of radioactive decay, from which isotopic signatures for different styles of mineralization are derived. The varying isotopic signatures are then introduced. The major part of the book details over 40 case histories for base and precious metals, uranium and tin using sampling media such as sulfides, gossans, soils, weathered bedrock, vegetation and groundwaters. Advantages and disadvantages of each are discussed. Examples are given of the use of lead isotopes in testing conceptual models for exploration. The success rate and cost-effectiveness of the method are illustrated by actual exploration examples. Analytical advances which should lower the cost of the method and future uses are outlined. Many of the case histories use recently published or unpublished data, 27 tables of which are given in an appendix. Details of sampling, the methods for obtaining the isotope ratios, and a commercially-available integrated lead isotope service are also provided. (Auth.)

  5. Lead poisoning after gunshot wound

    Directory of Open Access Journals (Sweden)

    Paulo Roberto de Madureira

    2000-05-01

    Full Text Available CONTEXT: Despite the absence of symptoms in the majority of patients carrying lead bullet fragments in their bodies, there needs to be an awareness of the possible signs and symptoms of lead intoxication when bullets are lodged in large joints like knees, hips and shoulders. Such patients merit closer follow-up, and even surgical procedure for removing the fragments. OBJECTIVE: To describe a patient who developed clinical lead intoxication several years after a gunshot wound. DESIGN: Case report. CASE REPORT: A single white 23-year-old male, regular job as a bricklayer, with a history of chronic alcohol abuse, showed up at the emergency department complaining of abdominal pain with colic, weakness, vomiting and diarrhea with black feces. All the symptoms had a duration of two to three weeks, and had been recurrent for the last two years, with calming during interval periods of two to three weeks. Abdominal radiograms showed a bullet lodged in the left hip, with a neat bursogram of the whole synovial capsule. A course of chelating treatment using calcium versenate (EDTACaNa2 intravenously was started. After the chelation therapy the patient had recurrence of his symptoms and a radical solution for the chronic mobilization of lead was considered. A hip arthroplasty procedure was performed, leading to complete substitution of the left hip.

  6. Lead and Hyperactivity: Lead Levels Among Hyperactive Children

    Science.gov (United States)

    David, Oliver J.; And Others

    1977-01-01

    In the study it is shown that within a group of 84 hyperactive children (4 to 11 years old) those for whom an organic etiology is present have lead burdens lower than in those for whom no apparent cause could be found. (Author/SBH)

  7. Microcirculation in experimental lead poisoning

    Energy Technology Data Exchange (ETDEWEB)

    Fimiani, R; Silvestroni, A; Iavicoli, N

    1973-01-01

    A study was made of the microvascular system of the auricle of the ear in 15 rabbits to which a 10 percent solution of lead acetate (0.5cm/sup 3//kg) was administered daily for 15 days through the gastric tract. Every 5 days up to the 35th day, determinations of blood and urine lead, free erythrocyte protoporphyrins and urinary coproporphyrins were carried out. Observations of the microvascular system were carried out in basic conditions after 6, 11, 16, 26 and 36 days. On the 6th day there was no pathological finding; on the 11th day small changes of the vascular content were observed, progressively assuming a sludge-like aspect. These findings confirm the hypothesis that the earliest changes caused by lead appear in the vascular content, before parietal changes occur.

  8. Jet calculus beyond leading logarithms

    International Nuclear Information System (INIS)

    Kalinowski, J.; Konishi, K.; Taylor, T.R.

    1981-01-01

    It is shown that the evolution of hadronic jets produced in hard processes can be studied in terms of a simple parton branching picture, beyond the leading log approximation of QCD. The jet calculus is generalized to any given order of logs (but always to all orders of αsub(s)). We discuss the general structure of the formalism. Universality of jet evolution is discussed. We consider also a jet calorimetry measure and the multiplicity distribution of final states in a form which allows a systematic improvement of approximation. To the next-to-leading order, we prove the finiteness and elucidate the scheme dependence of parton subprocess probabilities. The physical inclusive cross section is shown to be scheme independent: next-to-leading results for e + e - → q (nonsinglet) + X agree with those of Curci and others. (orig.)

  9. Initial occupational exposure to lead

    Energy Technology Data Exchange (ETDEWEB)

    Forni, A.; Cambiaghi, G.; Secchi, G.C.

    1976-01-01

    Serial chromosome and biochemical studies were carried out in 11 subjects before and during initial occupational exposure to moderate quantities of lead fumes in a storage battery plant. The rate of abnormal metaphases, mostly with chromatid and one-break chromosome aberrations, was approximately doubled after one month of work; it further increased after two months of work; remained in this range up to seven months of exposure; and then tended to decrease somewhat. Blood lead levels increased progressively in the first few months, then reached a steady state. Urinary lead and coproporphyrin levels increased sharply after one month of work, while urinary delta-aminolevulinic acid (ALA) levels increased moderately. The ALA dehydratase (ALAD) activity of red blood cells (RBCs) was reduced to almost 50 percent of the initial values after one month, decreased further in subsequent months, and remained decreased through the remainder of the study.

  10. Chronic lead intoxication; Chronische Bleiintoxikation

    Energy Technology Data Exchange (ETDEWEB)

    Wieseler, B.; Leng, G. [Duesseldorf Univ. (Germany). Inst. fuer Hygiene; Lenz, S.; Schultz, C. [Klinikum Remscheid GmbH, Remscheid (Germany); Wilhelm, M. [Bochum Univ. (Germany). Inst. fuer Hygiene, Sozial- und Umweltmedizin

    1999-02-01

    The case of a female 68 years old patient is described. Here, a chronic lead intoxication was diagnosed after a two year old medical history with increasing attacks of colic-like abdominal pain often described as life-threatening. After repeated hospitalizations and intensive search for the cause of the symptoms, porphyria and anemia was found to be a sign of a chronic lead poisoning. The blood lead concentrations were always about a level of 600 {mu}g/L. The source of exposure could not be found by now. Neither home inspection nor environmental investigations have shown a recent source of lead intake by the patient. However, a possible occupational source of lead exposure at a blast furnace was established by anamnesis for 1952 to 1962. Thus, osteoporosis induced lead mobilisation was suspected. Noticeable are the results of the six abdominal survey radiographies taken during hospitalization within one year; three radiographies were taken following clinical admission and three before discharge of the patient. In comparison, the course shows a chronic relapsing alimentary supply from metallic particles of unknown genesis. The patient was treated with the sodium salt of 2,3-dimercapto-1-propansulfonic acid (DMPS, Dimaval{sup TM}). She was free of complain afterwards. Following therapy, the blood lead concentrations fell under a level of 400 {mu}m/L, but after several weeks the lead level raised up to the original level of 600 {mu}g/L. (orig.) [Deutsch] Es wird eine 68jaehrige Patientin vorgestellt, bei der nach fast zweijaehriger Krankengeschichte, die gekennzeichnet war durch rezidivierende, teils als lebensbedrohlich geschilderte Bauchkoliken, eine chronische Bleiintoxikation diagnostiziert wurde. Erst nach wiederholten stationaeren Krankenhausaufenthalten mit intensiver Suche nach der Krankheitsursache wurden das Krankheitsbild und die Laborwerte durch Zusatzuntersuchungen ergaenzt, so dass sich in der festgestellten Porphyrie und Anaemie die Diagnose der

  11. Deformation properties of lead isotopes

    International Nuclear Information System (INIS)

    Tolokonnikov, S. V.; Borzov, I. N.; Lutostansky, Yu. S.; Saperstein, E. E.

    2016-01-01

    The deformation properties of a long lead isotopic chain up to the neutron drip line are analyzed on the basis of the energy density functional (EDF) in the FaNDF 0 Fayans form. The question of whether the ground state of neutron-deficient lead isotopes can have a stable deformation is studied in detail. The prediction of this deformation is contained in the results obtained on the basis of the HFB-17 and HFB-27 Skyrme EDF versions and reported on Internet. The present analysis reveals that this is at odds with experimental data on charge radii and magnetic moments of odd lead isotopes. The Fayans EDF version predicts a spherical ground state for all light lead isotopes, but some of them (for example, 180 Pb and 184 Pb) prove to be very soft—that is, close to the point of a phase transition to a deformed state. Also, the results obtained in our present study are compared with the predictions of some other Skyrme EDF versions, including SKM*, SLy4, SLy6, and UNE1. By and large, their predictions are closer to the results arising upon the application of the Fayans functional. For example, the SLy4 functional predicts, in just the same way as the FaNDF 0 functional, a spherical shape for all nuclei of this region. The remaining three Skyrme EDF versions lead to a deformation of some light lead isotopes, but their number is substantially smaller than that in the case of the HFB-17 and HFB-27 functionals. Moreover, the respective deformation energy is substantially lower, which gives grounds to hope for the restoration of a spherical shape upon going beyond the mean-field approximation, which we use here. Also, the deformation properties of neutron-rich lead isotopes are studied up to the neutron drip line. Here, the results obtained with the FaNDF 0 functional are compared with the predictions of the HFB-17, HFB-27, SKM*, and SLy4 Skyrme EDF versions. All of the EDF versions considered here predict the existence of a region where neutron-rich lead isotopes undergo

  12. [Acoustical parameters of toys].

    Science.gov (United States)

    Harazin, Barbara

    2010-01-01

    Toys play an important role in the development of the sight and hearing concentration in children. They also support the development of manipulation, gently influence a child and excite its emotional activities. A lot of toys emit various sounds. The aim of the study was to assess sound levels produced by sound-emitting toys used by young children. Acoustical parameters of noise were evaluated for 16 sound-emitting plastic toys in laboratory conditions. The noise level was recorded at four different distances, 10, 20, 25 and 30 cm, from the toy. Measurements of A-weighted sound pressure levels and noise levels in octave band in the frequency range from 31.5 Hz to 16 kHz were performed at each distance. Taking into consideration the highest equivalent A-weighted sound levels produced by tested toys, they can be divided into four groups: below 70 dB (6 toys), from 70 to 74 dB (4 toys), from 75 to 84 dB (3 toys) and from 85 to 94 dB (3 toys). The majority of toys (81%) emitted dominant sound levels in octave band at the frequency range from 2 kHz to 4 kHz. Sound-emitting toys produce the highest acoustic energy at the frequency range of the highest susceptibility of the auditory system. Noise levels produced by some toys can be dangerous to children's hearing.

  13. 600 a Current Leads with Dry and Compact Warm Terminals

    CERN Document Server

    Andersen, T P; Vullierme, B

    2002-01-01

    For the LHC magnet test benches 26 pairs of conventional helium vapour-cooled 600 A current leads are required. The first pair of 600 A current leads has been designed and built by industry and tested at CERN. The main component of the lead is the heat exchanger, which consists of two concentric copper pipes. Special attention was also given to the design of the warm terminal in order to avoid any condensation and to resist at an electrical test of 2 kV. The paper describes construction details and compares calculated and measured values of the main parameters.

  14. Acute effects of copper and lead on some blood parameters on ...

    African Journals Online (AJOL)

    user

    2011-04-18

    Apr 18, 2011 ... micrograms/L (Martinez et al., 2004). High levels of heavy metals cause environmental pollution, especially in water body. Water pollution with heavy metals, affects various physiological processes in fish, including blood cells. In fish, toxic substances taken up from the water enter the blood and therefore, ...

  15. Acute effects of copper and lead on some blood parameters on ...

    African Journals Online (AJOL)

    user

    2011-04-18

    Apr 18, 2011 ... various physiological processes in fish, including blood ... and flow-through well water (T= 13°C, pH= 7.1, hardness= 25 mg/l .... 3208 Afr. J. Biotechnol. Figure 2. Erythrocyte shape and size of coruh trout (S. coruhensis) control ...

  16. Prediction of equilibrium parameters of adsorption of lead (II) ions onto diatomite

    Science.gov (United States)

    Salman, Taylan; Ardalı, Yüksel; Gamze Turan, N.

    2013-04-01

    Heavy metals from industrial wastewaters are one of the most important environmental issues to be solved today. Due to their toxicity and nonbiodegradable nature, heavy metals cause environmental and public health problems. Various techniques have been developed to remove heavy metals from aqueous solutions. These include chemical precipitation, reverse osmosis, ion Exchange and adsorption. Among them, adsorption is considered to be a particularly competitive and effective process for the removal of heavy metals from aqueous solutions. There is growing interest in using low cost, commercially available materials for the adsorption of heavy metals. Diatomite is a siliceous sedimentary rock having an amorphous form of silica (SiO2. nH2O) containing a small amount of microcrystalline material. It has unique combination of physical and chemical properties such as high porosity, high permeability, small particle size, large surface area, and low thermal conductivity. In addition, it is available in Turkey and in various locations around the world. Therefore, diatomite has been successfully used as adsorbent for the removal of heavy metals. The aim of the study is to investigate the adsorption properties of diatomite. The equilibrium adsorption data were applied to the Langmuir, Freundlich and Dubinin-Radushkevic (D-R) isotherm models. Adsorption experiments were performed under batch process, using Pb (II) initial concentration, pH of solution and contact time as variables. The results demonstrated that the adsorption of Pb (II) was strongly dependent on pH of solution. The effect of pH on adsorption of Pb(II) on diatomite was conducted by varying pH from 2 to 12 at 20 oC. In the pH range of 2.0-4.0, the adsorption percentage increases slightly as the pH increasing. At pH>4, the adsorption percentage decreases with increasing pH because hydrolysis product and the precipitation begin to play an important role in the sorption of Pb (II). At pH4, the maximum adsorption capacity of diatomite was found as 26.158 mg/g. The adsorption isotherms of Pb (II) on diatomite can be described well by the Freundlich model. The high adsorption capacity of diatomite makes it suitable low-cost material in the removal of Pb (II) from aqueous solutions.

  17. Mortality study of lead workers

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, W C; Gaffey, W R

    1975-01-01

    The mortality of 7,032 men employed for one or more years in lead production facilities or battery plants was followed over a 23-year period, 1947-70. Lead absorption in many of these men was greatly in excess of currently accepted standards based upon urinary and blood lead concentrations available for a portion of the group. There were 1,356 deaths reported. The standardized mortality ratio (SMR) for all causes was 107 for smelter workers and 99 for battery plant workers. Death from neoplasms were in slight excess in smelters, but not significantly increased in battery plants. There were no excess deaths from kidney tumors. The SMR for cardiovascular-renal disease was 96 for smelter workers and 101 for battery plant workers. There was definitely no excess in deaths from either stroke or hypertensive heart disease; however, deaths classified as other hypertensive disease and unspecified nephritis or renal sclerosis were higher than expected. The life expectancy of lead workers was calculated to be approximately the same as that of all U.S. males.

  18. High temperature superconductor current leads

    International Nuclear Information System (INIS)

    Zeimetz, B.; Liu, H.K.; Dou, S.X.

    1996-01-01

    Full text: The use of superconductors in high electrical current applications (magnets, transformers, generators etc.) usually requires cooling with liquid Helium, which is very expensive. The superconductor itself produces no heat, and the design of Helium dewars is very advanced. Therefore most of the heat loss, i.e. Helium consumption, comes from the current lead which connects the superconductor with its power source at room temperature. The current lead usually consists of a pair of thick copper wires. The discovery of the High Temperature Superconductors makes it possible to replace a part of the copper with superconducting material. This drastically reduces the heat losses because a) the superconductor generates no resistive heat and b) it is a very poor thermal conductor compared with the copper. In this work silver-sheathed superconducting tapes are used as current lead components. The work comprises both the production of the tapes and the overall design of the leads, in order to a) maximize the current capacity ('critical current') of the superconductor, b) minimize the thermal conductivity of the silver clad, and c) optimize the cooling conditions

  19. Lead apron: room for improvement

    Energy Technology Data Exchange (ETDEWEB)

    Boothroyd, A.E.; Russell, J.G.B.

    1987-02-01

    The amount of red bone marrow not protected by a lead apron was used as an assessment of protection efficiency, and the effect of change of shape was calculated. It was concluded that change of shape would increase protection and cut down cost. (U.K.).

  20. OPAL Various Lead Glass Blocks

    CERN Multimedia

    These lead glass blocks were part of a CERN detector called OPAL (one of the four experiments at the LEP particle detector). OPAL uses some 12 000 blocks of glass like this to measure particle energies in the electromagnetic calorimeter. This detector measured the energy deposited when electrons and photons were slowed down and stopped.

  1. Copper, lead and zinc production

    International Nuclear Information System (INIS)

    Ayers, J.; Ternan, S.

    2001-01-01

    This chapter provides information on the by-products and residues generated during the production of copper, lead and zinc. The purpose of this chapter is to describe by-products and residues which are generated, how these may be avoided or minimised, and available options for the utilization and management of residues. (author)

  2. Lead-iron phosophate glass

    International Nuclear Information System (INIS)

    Sales, B.C.; Boatner, L.A.

    1988-01-01

    The lead-iron phosphate nuclear waste glasses (LIPNWG) are the subject of the present chapter. They were discovered in 1984 while the authors were attempting to find a sintering aid for certain types of crystalline monazite ceramic high-level nuclear waste forms. In the present chapter, the term waste glass is synonymous with nuclear waste glass (NWG), and the acronym LIP is often used for lead-iron phosphate. Lead-iron phosphate glasses, like many of the previously studied phosphate glasses, are corrosion resistant in aqueous solutions at temperatures below 100 degrees C, and they can be melted and poured at temperatures that are relatively low in comparison with the processing temperatures required for current silicate glass compositions. Unlike the phosphate glasses investigated previously, however, LIPNWGs do not suffer from alteration due to devitrification during realistic and readily, achievable cooling periods. Additionally, lead-iron phosphate glass melts are not nearly as corrosive as the sodium phosphate melts investigated during the 1960s; and, therefore, they can be melted and processed using crucibles made from a variety of materials

  3. Current Leads, Links and Buses

    CERN Document Server

    Ballarino, A

    2014-01-01

    Electrical transfer from a room temperature power source to a superconducting system is done via conventional or superconducting current leads and superconducting buses or links. The principles of optimization of these devices are presented, with emphasis on the cryogenic, electrical, and superconductor related aspects that drive choices for a system.

  4. Triplet states in lead isotopes

    International Nuclear Information System (INIS)

    Naz, Tabassum; Ahmad, Shakeb; Abusara, H.

    2017-01-01

    Axial and triaxial calculations within RHB have been done to study the shape coexistence phenomena in the lead isotopes. Triplet states have been found in the 184-190 Pb which are in accordance with the experimental and other theoretical observations. The energy difference (in MeV) between the first two excited states also gives the evidence for the same

  5. Implementation Guide: Leading School Change

    Science.gov (United States)

    Whitaker, Todd

    2010-01-01

    This two-part "Implementation Guide" will help to deepen your understanding and sharpen your ability to implement each of the strategies discussed in "Leading School Change: Nine Strategies to Bring Everybody on Board" (ED509821). Part One offers discussion questions and activities which focus on each of the nine strategies. They can be completed…

  6. Lead in calcium supplements (abstract)

    International Nuclear Information System (INIS)

    Rehman, S.; Khalid, N.

    2011-01-01

    Lead present in calcium supplements is of grave concern as some lead levels have been measured up to the extent of regulatory limit set by the United States. Calcium supplements inevitably get contaminated with lead as both are naturally occurring elements. Therefore, it is imperative to indicate its level in these supplements in order to create awareness among consumers. In this study, a sophisticated analytical technique, atomic absorption spectrometry was used to analyze Pb contents in 27 commonly consumed Ca supplements manufactured by different national and multinational companies. The daily intake of lead through these supplements was calculated. Only 10% of the calcium supplements analyzed met the criteria of acceptable Pb levels (1.5 mu g/daily dose) in supplements/consumer products set by the United States. It was also found that Pb intake was highest in chelated calcium supplements 28.5 mu g/daily dose, whereas lowest 0.47 mu g/daily dose through calcium supplements with vitamin D formulation. In order to validate our results from the study conducted, IAEA-certified reference material (animal bone, H-5) was analyzed for its Pb levels. The levels of Pb determined were quite in good agreement with the certified values. (author)

  7. How to lead complex situations

    DEFF Research Database (Denmark)

    Hansen, Michael Pingel

    2013-01-01

    The military leader is experiencing increasingly more complex situations, whether it is as leader in a foreign combat environment or in the home-based public administration. Complex situations like these call for a special set of managerial responses and a special way of leading organisations...

  8. Current Leads, Links and Buses

    Energy Technology Data Exchange (ETDEWEB)

    Ballarino, A [European Organization for Nuclear Research, Geneva (Switzerland)

    2014-07-01

    Electrical transfer from a room temperature power source to a superconducting system is done via conventional or superconducting current leads and superconducting buses or links. The principles of optimization of these devices are presented, with emphasis on the cryogenic, electrical, and superconductor related aspects that drive choices for a system.

  9. Leading in a Technological Age

    Science.gov (United States)

    Yadgir, Sheri A.

    2011-01-01

    Technology is advancing more rapidly than at any time in history since the beginning of the Industrial Revolution. In fact, experts say that the world is leaving the Industrial Age of the 20th century and entering an Information Age that will lead into the future. These advances mean that important changes are being made in all areas of life--and…

  10. Lifetime modelling of lead acid batteries

    DEFF Research Database (Denmark)

    Bindner, H.; Cronin, T.; Lundsager, P.

    2005-01-01

    The performance and lifetime of energy storage in batteries are an important part of many renewable based energy systems. Not only do batteries impact on the system performance but they are also a significant expenditure when considering the whole lifecycle costs. Poor prediction of lifetime can......, therefore, lead to uncertainty in the viability of the system in the long term. This report details the work undertaken to investigate and develop two different battery life prediction methodologies withspecific reference to their use in hybrid renewable energy systems. Alongside this, results from battery...... tests designed to exercise batteries in similar modes to those that they experience in hybrid systems have also been analysed. These have yieldedbattery specific parameters for use in the prediction software and the first results in the validation process of the software are also given. This work has...

  11. Polizei-Compliance / Frank Braun, Florian Albrecht

    Index Scriptorium Estoniae

    Braun, Frank

    2015-01-01

    Normide ja seaduste järgimisest politsei tegevuses ning vastavussüsteemi juurutamisest politseiorganisatsioonis tegevuse läbipaistvamaks muutmiseks, halduse optimeerimiseks ja kodanike usalduse suurendamiseks

  12. Frank: The LOD cloud at your fingertips?

    NARCIS (Netherlands)

    Beek, Wouter; Rietveld, Laurens

    2015-01-01

    Large-scale, algorithmic access to LOD Cloud data has been hampered by the absence of queryable endpoints for many datasets, a plethora of serialization formats, and an abundance of idiosyncrasies such as syntax errors. As of late, very large-scale — hundreds of thousands of document, tens of

  13. Frank : The LOD cloud at your fingertips?

    NARCIS (Netherlands)

    Beek, Wouter; Rietveld, Laurens

    2015-01-01

    Large-scale, algorithmic access to LOD Cloud data has been hampered by the absence of queryable endpoints for many datasets, a plethora of serialization formats, and an abundance of idiosyncrasies such as syntax errors. As of late, very large-scale - hundreds of thousands of document, tens of

  14. Can We Really Count on Frank?

    Science.gov (United States)

    Marston, Jennifer L.; Muir, Tracey; Livy, Sharyn

    2013-01-01

    The National Council of Teachers of Mathematics (NCTM) and the Australian National Curriculum encourage the integration of literacy and numeracy, and "Teaching Children Mathematics" ("TCM") regularly includes articles on incorporating picture books into the mathematics program. Marston has developed a new framework (2010) to assist teachers in…

  15. 2577-IJBCS-Article-Frank Ngoyi Tshite

    African Journals Online (AJOL)

    hp

    Quality evaluation of glucose serup from sweet cassava hydrolyzed by rice malt crude enzymes extract. Journal of Food. Technology, 11(3): 1-3. Alozie YE, Iyam MA, lawalo O, udofia U,. Ani IF. 2009. Utilisation de la farine de. Bambara comme aliment de complément. Londres. Journal of Food Technology,. 7(4): 111-114.

  16. Er Frank rationel demokrat eller naiv fetichist?

    DEFF Research Database (Denmark)

    Rösing, Lilian Munk

    2014-01-01

    Artiklen er en diskussion af demokrati-begrebet i Rune Lykkebergs Alle har ret. Over for Lykkebregs demokrati-begreb sætter den Rancières og Zizeks forståelse af demokratiet som en åbning for det, den sociale orden ikke kan rumme. Det fører til en kritik af Lykkebergs anvendelse af begreberne om...

  17. 2286-IJBCS-Article-Frank Mounioko

    African Journals Online (AJOL)

    hp

    la trypanosomiase humaine africaine dans le parc national de Moukalaba. Doudou ... 3Ecole Régionale Post-Universitaire d'Aménagement et de Gestion Intégrés des Forêts et Territoires. Tropicaux ... Elle véhicule également T. brucei.

  18. Walter Frank Raphael Weldon (1860–1906)

    Indian Academy of Sciences (India)

    the second child of Walter Weldon and Anne Cotton. He had ... dergo a regular school education till the age of thirteen, although he was informally taught by .... nent of the importance of discontinuous variations in evolution, and an opponent of ...

  19. Effects of occupational lead exposure.

    Science.gov (United States)

    Wang, Y L; Lu, P K; Chen, Z Q; Liang, Y X; Lu, Q M; Pan, Z Q; Shao, M

    1985-01-01

    Fifty-three workers in a battery factory, 52 solderers in a television factory, and 50 embroidery workers (a reference group) were studied. The average air lead levels of the three workplaces were 0.578 mg/m3, 0.002 mg/m3, and 0.001 mg/m3, respectively. Adverse effects in terms of clinical manifestations and biochemical criteria were evident among the battery factory workers. A significant dose-response relationship existed between the toxic effects and the air lead levels. The solderers showed no apparent abnormalities in comparison with the embroidery workers. The early clinical manifestations were dysfunction of the central nervous system, indigestion, arthralgia, and myalgia in the extremities. A positive association was observed between the prevalence of fatigue, mild abdominal pain, and arthralgia and the blood lead (PbB), urinary lead (PbU), and zinc protoporphyrin (ZPP) levels. The symptomatic threshold values of PbB, PbU, and ZPP were 30 micrograms/dl (1.5 mumol/l), 0.045 mg/l (0.2 mumol/l), and 40 micrograms/dl (0.7 mumol/l), respectively. The PbB, PbU, free erythrocyte protoporphyrin, and ZPP levels and the blood aminolevulinic dehydratase ratio could be used as indicators of lead exposure, although ZPP is preferred for a preventive monitoring program. The motor and sensory conduction velocities of the median nerve were slower in the exposed groups than in the reference group. No effects on behavioral function were observed among the solderers.

  20. Gammatography of thick lead vessels

    International Nuclear Information System (INIS)

    Raghunath, V.M.; Bhatnagar, P.K.; Sundaram, V.M.

    1979-01-01

    Radiography, scintillation and GM counting and dose measurements using ionisation chamber equipment are commonly used for detecting flaws/voids in materials. The first method is mostly used for steel vessels and to a lesser extent thin lead vessels also and is essentially qualitative. Dose measuring techniques are used for very thick and large lead vessels for which high strength radioactive sources are required, with its inherent handling problems. For vessels of intermediate thicknesses, it is ideal to use a small strength source and a GM or scintillation counter assembly. At the Reactor Research Centre, Kalpakkam, such a system was used for checking three lead vessels of thicknesses varying from 38mm to 65mm. The tolerances specified were +- 4% variation in lead thickness. The measurements also revealed the non concentricity of one vessel which had a thickness varying from 38mm to 44mm. The second vessel was patently non-concentric and the dimensional variation was truly reproduced in the measurements. A third vessel was fabricated with careful control of dimensions and the measurements exhibited good concentricity. Small deviations were observed, attributable to imperfect bondings between steel and lead. This technique has the following advantages: (a) weaker sources used result in less handling problems reducing the personnel exposures considerably; (b) the sensitivity of the instrument is quite good because of better statistics; (c) the time required for scanning a small vessel is more, but a judicious use of a scintillometer for initial fast scan will help in reducing the total scanning time; (d) this method can take advantage of the dimensional variations themselves to get the calibration and to estimate the deviations from specified tolerances. (auth.)

  1. Deaths: Leading Causes for 2011.

    Science.gov (United States)

    Heron, Melonie

    2015-07-27

    This report presents final 2011 data on the 10 leading causes of death in the United States by age, sex, race, and Hispanic origin. Leading causes of infant, neonatal, and postneonatal death are also presented. This report supplements ‘‘Deaths: Final Data for 2011,’’ the National Center for Health Statistics’ annual report of final mortality statistics. Data in this report are based on information from all death certificates filed in the 50 states and the District of Columbia in 2011. Causes of death classified by the International Classification of Diseases, 10th Revision (ICD–10) are ranked according to the number of deaths assigned to rankable causes. Cause-of-death statistics are based on the underlying cause of death. In 2011, the 10 leading causes of death were, in rank order: Diseases of heart; Malignant neoplasms; Chronic lower respiratory diseases; Cerebrovascular diseases; Accidents (unintentional injuries); Alzheimer’s disease; Diabetes mellitus; Influenza and pneumonia; Nephritis, nephrotic syndrome and nephrosis; and Intentional self-harm (suicide). They accounted for 74% of all deaths occurring in the United States. Differences in the rankings are evident by age, sex, race, and Hispanic origin. Leading causes of infant death for 2011 were, in rank order: Congenital malformations, deformations and chromosomal abnormalities; Disorders related to short gestation and low birth weight, not elsewhere classified; Sudden infant death syndrome; Newborn affected by maternal complications of pregnancy; Accidents (unintentional injuries); Newborn affected by complications of placenta, cord and membranes; Bacterial sepsis of newborn; Respiratory distress of newborn; Diseases of the circulatory system; and Neonatal hemorrhage. Important variations in the leading causes of infant death are noted for the neonatal and postneonatal periods. All material appearing in this report is in the public domain and may be reproduced or copied without permission

  2. Deaths: Leading Causes for 2015.

    Science.gov (United States)

    Heron, Melonie

    2017-11-01

    Objectives-This report presents final 2015 data on the 10 leading causes of death in the United States by age, sex, race, and Hispanic origin. Leading causes of infant, neonatal, and postneonatal death are also presented. This report supplements "Deaths: Final Data for 2015," the National Center for Health Statistics' annual report of final mortality statistics. Methods-Data in this report are based on information from all death certificates filed in the 50 states and the District of Columbia in 2015. Causes of death classified by the International Classification of Diseases, Tenth Revision (ICD-10) are ranked according to the number of deaths assigned to rankable causes. Cause-of-death statistics are based on the underlying cause of death. Results-In 2015, the 10 leading causes of death were, in rank order: Diseases of heart; Malignant neoplasms; Chronic lower respiratory diseases; Accidents (unintentional injuries); Cerebrovascular diseases; Alzheimer's disease; Diabetes mellitus; Influenza and pneumonia; Nephritis, nephrotic syndrome and nephrosis; and Intentional self-harm (suicide). They accounted for 74% of all deaths occurring in the United States. Differences in the rankings are evident by age, sex, race, and Hispanic origin. Leading causes of infant death for 2015 were, in rank order: Congenital malformations, deformations and chromosomal abnormalities; Disorders related to short gestation and low birth weight, not elsewhere classified; Sudden infant death syndrome; Newborn affected by maternal complications of pregnancy; Accidents (unintentional injuries); Newborn affected by complications of placenta, cord and membranes; Bacterial sepsis of newborn; Respiratory distress of newborn; Diseases of the circulatory system; and Neonatal hemorrhage. Important variations in the leading causes of infant death are noted for the neonatal and postneonatal periods. All material appearing in this report is in the public domain and may be reproduced or copied without

  3. Deaths: leading causes for 2010.

    Science.gov (United States)

    Heron, Melonie

    2013-12-20

    This report presents final 2010 data on the 10 leading causes of death in the United States by age, sex, race, and Hispanic origin. Leading causes of infant, neonatal, and postneonatal death are also presented. This report supplements the Division of Vital Statistics' annual report of final mortality statistics. Data in this report are based on information from all death certificates filed in the 50 states and the District of Columbia in 2010. Causes of death classified by the International Classification of Diseases, Tenth Revision (ICD-10) are ranked according to the number of deaths assigned to rankable causes. Cause-of-death statistics are based on the underlying cause of death. In 2010, the 10 leading causes of death were, in rank order: Diseases of heart; Malignant neoplasms; Chronic lower respiratory diseases; Cerebrovascular diseases; Accidents (unintentional injuries); Alzheimer's disease; Diabetes mellitus; Nephritis, nephrotic syndrome and nephrosis; Influenza and pneumonia; and Intentional self-harm (suicide). These 10 causes accounted for 75% of all deaths occurring in the United States. Differences in the rankings are evident by age, sex, race, and Hispanic origin. Leading causes of infant death for 2010 were, in rank order: Congenital malformations, deformations and chromosomal abnormalities; Disorders related to short gestation and low birth weight, not elsewhere classified; Sudden infant death syndrome; Newborn affected by maternal complications of pregnancy; Accidents (unintentional injuries); Newborn affected by complications of placenta, cord and membranes; Bacterial sepsis of newborn; Respiratory distress of newborn; Diseases of the circulatory system; and Necrotizing enterocolitis of newborn. Important variations in the leading causes of infant death are noted for the neonatal and post-neonatal periods. All material appearing in this report is in the public domain and may be reproduced or copied without permission; citation as to source

  4. Deaths: Leading Causes for 2013.

    Science.gov (United States)

    Heron, Melonie

    2016-02-16

    This report presents final 2013 data on the 10 leading causes of death in the United States by age, sex, race, and Hispanic origin. Leading causes of infant, neonatal, and postneonatal death are also presented. This report supplements "Deaths: Final Data for 2013," the National Center for Health Statistics’ annual report of final mortality statistics. Data in this report are based on information from all death certificates filed in the 50 states and the District of Columbia in 2013. Causes of death classified by the International Classification of Diseases, Tenth Revision (ICD–10) are ranked according to the number of deaths assigned to rankable causes. Cause-of-death statistics are based on the underlying cause of death. In 2013, the 10 leading causes of death were, in rank order: Diseases of heart; Malignant neoplasms; Chronic lower respiratory diseases; Accidents (unintentional injuries); Cerebrovascular diseases; Alzheimer’s disease; Diabetes mellitus; Influenza and pneumonia; Nephritis, nephrotic syndrome and nephrosis; and Intentional self-harm (suicide). They accounted for 74% of all deaths occurring in the United States. Differences in the rankings are evident by age, sex, race, and Hispanic origin. Leading causes of infant death for 2013 were, in rank order: Congenital malformations, deformations and chromosomal abnormalities; Disorders related to short gestation and low birth weight, not elsewhere classified; Newborn affected by maternal complications of pregnancy; Sudden infant death syndrome; Accidents (unintentional injuries); Newborn affected by complications of placenta, cord and membranes; Bacterial sepsis of newborn; Respiratory distress of newborn; Diseases of the circulatory system; and Neonatal hemorrhage. Important variations in the leading causes of infant death are noted for the neonatal and postneonatal periods. All material appearing in this report is in the public domain and may be reproduced or copied without permission; citation as

  5. Deaths: Leading Causes for 2012.

    Science.gov (United States)

    Heron, Melonie

    2015-08-31

    This report presents final 2012 data on the 10 leading causes of death in the United States by age, sex, race, and Hispanic origin. Leading causes of infant, neonatal, and postneonatal death are also presented. This report supplements "Deaths: Final Data for 2012," the National Center for Health Statistics' annual report of final mortality statistics. Data in this report are based on information from all death certificates filed in the 50 states and the District of Columbia in 2012. Causes of death classified by the International Classification of Diseases, Tenth Revision (ICD-10) are ranked according to the number of deaths assigned to rankable causes. Cause-of-death statistics are based on the underlying cause of death. In 2012, the 10 leading causes of death were, in rank order: Diseases of heart; Malignant neoplasms; Chronic lower respiratory diseases; Cerebrovascular diseases; Accidents (unintentional injuries); Alzheimer's disease; Diabetes mellitus; Influenza and pneumonia; Nephritis, nephrotic syndrome and nephrosis; and Intentional self-harm (suicide). These causes accounted for 74% of all deaths occurring in the United States. Differences in the rankings are evident by age, sex, race, and Hispanic origin. Leading causes of infant death for 2012 were, in rank order: Congenital malformations, deformations and chromosomal abnormalities; Disorders related to short gestation and low birth weight, not elsewhere classified; Sudden infant death syndrome; Newborn affected by maternal complications of pregnancy; Accidents (unintentional injuries); Newborn affected by complications of placenta, cord and membranes; Bacterial sepsis of newborn; Respiratory distress of newborn; Diseases of the circulatory system; and Neonatal hemorrhage. Important variations in the leading causes of infant death are noted for the neonatal and postneonatal periods.

  6. Haematological profiles and serum lead levels in male fuel ...

    African Journals Online (AJOL)

    The haematological profiles and serum lead levels of male fuel station attendants in Calabar metropolis were determined. The haematological parameters assessed included haemoglobin concentration (Hb), haematocrit (HCT), total white blood cell count (WBC), differential white cell counts and platelet count. Age range of ...

  7. Influence of the cooling rate on the ageing of lead-calcium alloys

    Energy Technology Data Exchange (ETDEWEB)

    Rossi, F.; Lambertin, M. [LaBoMaP, Arts et Metiers ParisTech, Rue porte de Paris, 71250 Cluny (France); Delfaut-Durut, L. [CEA, centre de Valduc [SEMP, LECM], 21120 Is-sur-Tille (France); Maitre, A. [SPCTS, UFR Sciences et Techniques, 87060 Limoges (France); Vilasi, M. [LCSM, Universite Nancy I, 54506 Vandoeuvre les Nancy (France)

    2009-03-01

    Cast lead-calcium alloys were known to be sensitive to experimental parameters, which cause large variations on the ageing and overageing behaviour. From the study of these parameters, the quenching rate was the only significant parameter. A critical cooling rate was defined based on hardness, electrical resistivity and metallographical observations. The inconsistencies in the literature noticed on the evolutions of lead-calcium alloys can now be explained by whether or not this critical cooling rate was respected. (author)

  8. Lead and Drinking Water from Private Wells

    Science.gov (United States)

    ... type=”submit” value=”Submit” /> Healthy Water Home Lead and Drinking Water from Private Wells Recommend on ... remove lead from my drinking water? What is lead? Lead is a naturally occurring bluish-gray metal ...

  9. Parameters of care for craniosynostosis

    DEFF Research Database (Denmark)

    McCarthy, Joseph G; Warren, Stephen M; Bernstein, Joseph

    2012-01-01

    A multidisciplinary meeting was held from March 4 to 6, 2010, in Atlanta, Georgia, entitled "Craniosynostosis: Developing Parameters for Diagnosis, Treatment, and Management." The goal of this meeting was to create parameters of care for individuals with craniosynostosis.......A multidisciplinary meeting was held from March 4 to 6, 2010, in Atlanta, Georgia, entitled "Craniosynostosis: Developing Parameters for Diagnosis, Treatment, and Management." The goal of this meeting was to create parameters of care for individuals with craniosynostosis....

  10. Subsurface Geotechnical Parameters Report

    International Nuclear Information System (INIS)

    Rigby, D.; Mrugala, M.; Shideler, G.; Davidsavor, T.; Leem, J.; Buesch, D.; Sun, Y.; Potyondy, D.; Christianson, M.

    2003-01-01

    The Yucca Mountain Project is entering a the license application (LA) stage in its mission to develop the nation's first underground nuclear waste repository. After a number of years of gathering data related to site characterization, including activities ranging from laboratory and site investigations, to numerical modeling of processes associated with conditions to be encountered in the future repository, the Project is realigning its activities towards the License Application preparation. At the current stage, the major efforts are directed at translating the results of scientific investigations into sets of data needed to support the design, and to fulfill the licensing requirements and the repository design activities. This document addresses the program need to address specific technical questions so that an assessment can be made about the suitability and adequacy of data to license and construct a repository at the Yucca Mountain Site. In July 2002, the U.S. Nuclear Regulatory Commission (NRC) published an Integrated Issue Resolution Status Report (NRC 2002). Included in this report were the Repository Design and Thermal-Mechanical Effects (RDTME) Key Technical Issues (KTI). Geotechnical agreements were formulated to resolve a number of KTI subissues, in particular, RDTME KTIs 3.04, 3.05, 3.07, and 3.19 relate to the physical, thermal and mechanical properties of the host rock (NRC 2002, pp. 2.1.1-28, 2.1.7-10 to 2.1.7-21, A-17, A-18, and A-20). The purpose of the Subsurface Geotechnical Parameters Report is to present an accounting of current geotechnical information that will help resolve KTI subissues and some other project needs. The report analyzes and summarizes available qualified geotechnical data. It evaluates the sufficiency and quality of existing data to support engineering design and performance assessment. In addition, the corroborative data obtained from tests performed by a number of research organizations is presented to reinforce

  11. Subsurface Geotechnical Parameters Report

    Energy Technology Data Exchange (ETDEWEB)

    D. Rigby; M. Mrugala; G. Shideler; T. Davidsavor; J. Leem; D. Buesch; Y. Sun; D. Potyondy; M. Christianson

    2003-12-17

    The Yucca Mountain Project is entering a the license application (LA) stage in its mission to develop the nation's first underground nuclear waste repository. After a number of years of gathering data related to site characterization, including activities ranging from laboratory and site investigations, to numerical modeling of processes associated with conditions to be encountered in the future repository, the Project is realigning its activities towards the License Application preparation. At the current stage, the major efforts are directed at translating the results of scientific investigations into sets of data needed to support the design, and to fulfill the licensing requirements and the repository design activities. This document addresses the program need to address specific technical questions so that an assessment can be made about the suitability and adequacy of data to license and construct a repository at the Yucca Mountain Site. In July 2002, the U.S. Nuclear Regulatory Commission (NRC) published an Integrated Issue Resolution Status Report (NRC 2002). Included in this report were the Repository Design and Thermal-Mechanical Effects (RDTME) Key Technical Issues (KTI). Geotechnical agreements were formulated to resolve a number of KTI subissues, in particular, RDTME KTIs 3.04, 3.05, 3.07, and 3.19 relate to the physical, thermal and mechanical properties of the host rock (NRC 2002, pp. 2.1.1-28, 2.1.7-10 to 2.1.7-21, A-17, A-18, and A-20). The purpose of the Subsurface Geotechnical Parameters Report is to present an accounting of current geotechnical information that will help resolve KTI subissues and some other project needs. The report analyzes and summarizes available qualified geotechnical data. It evaluates the sufficiency and quality of existing data to support engineering design and performance assessment. In addition, the corroborative data obtained from tests performed by a number of research organizations is presented to reinforce

  12. Lifetime modelling of lead acid batteries

    Energy Technology Data Exchange (ETDEWEB)

    Bindner, H.; Cronin, T.; Lundsager, P.

    2005-04-01

    The performance and lifetime of energy storage in batteries are an important part of many renewable based energy systems. Not only do batteries impact on the system performance but they are also a significant expenditure when considering the whole life cycle costs. Poor prediction of lifetime can, therefore, lead to uncertainty in the viability of the system in the long term. This report details the work undertaken to investigate and develop two different battery life prediction methodologies with specific reference to their use in hybrid renewable energy systems. Alongside this, results from battery tests designed to exercise batteries in similar modes to those that they experience in hybrid systems have also been analysed. These have yielded battery specific parameters for use in the prediction software and the first results in the validation process of the software are also given. This work has been part of the European Union Benchmarking research project (ENK6-CT-2001-80576), funded by the European Union, the United States and Australian governments together with other European states and other public and private financing bodies. The project has concentrated on lead acid batteries as this technology is the most commonly used. Through this work the project partner institutions have intended to provide useful tools to improve the design capabilities of organizations, private and public, in remote power systems. (au)

  13. Heat conduction in superconducting lead thallium alloys

    International Nuclear Information System (INIS)

    Ho, J.L.N.

    1975-01-01

    The heat conduction of six strong coupling superconducting Pb--Tl alloy specimens (1 to 20 percent wt Tl) was investigated with the emphasis on the effects of impurities upon the phonon thermal conductivity. All the specimens were annealed at 275 0 C for one week. Results show that the superconducting state phonon thermal conductivity of Pb--Tl is in reasonably good agreement with BRT theory. The strong coupling superconductivity of lead alloys can be handled by scaling the gap parameter using a constant factor. The results presented also show that the phonon thermal conductivity at low temperatures of well annealed lead-thallium alloys can be analyzed in terms of phonon scattering by the grain boundaries, point defects, conduction electrons, and other phonons. The phonon-dislocation scattering was found to be unimportant. The phonon relaxation rate due to point defects is in reasonably good agreement with the Klemens theory for the long range strain field scattering introduced by the thallium impurities. At low temperatures, the normal state phonon thermal conductivity showed an increase in the phonon-electron relaxation rate as the thallium concentration increases. The increase of the phonon-electron relaxation rate is attributed to the change of the Fermi surface caused by the presence of thallium impurity. The effect of the strong electron-phonon coupling character upon the phonon-electron relaxation rate has also been considered in terms of the electron-phonon enhancement factor found in the specific heat measurements

  14. Lead plating of the low beta resonator

    International Nuclear Information System (INIS)

    Brennan, J.M.; Corcoran, D.; Coughlin, R.; Goliak, T.; Hodgkins, D.; James, P.; Seamster, A.G.; Secora, J.H.

    1984-01-01

    Plating operations were performed at the lead plating facility at SUNY, Stony Brook. Initial procedures were based on the previous experience of prototype development by Ben-Zvi and Brennan. Several attempts were made to produce satisfactory results, however the lead surfaces were consistently stained and lacked the bright metallic finish routinely achieved with the split loop resonator at SUNY. The development of a new set of procedures was initiated, aided by reports of plating success from Ben-Zvi. Controlled tests were conducted which suggested several changes in the plating parameters. Based on these results and suggestions from the staff at SUNY a new process was defined which was successful in producing the smooth reflective metallic surface known to be necessary forla optimum resonator performance. Following a successful repair of the the crack, the prototype was plated and chemically polished with the new techniques. The resultant surface was highly reflective and free of stains and particulates. The subsequent prototype cold test was successful

  15. Relational Leading and Dialogic Process

    DEFF Research Database (Denmark)

    Hansen, Lone Hersted

    The Ph.D. thesis contributes to a relational orientation to leading, emphasizing leadership as a shared, collaborative and co-creative activity. In this paradigm major emphasis is put on dialogue and interaction. Inspired by social constructionist ideas, the thesis considers approaches to learning...... and knowledge building as related to relational leading. The practices developed in the thesis research demonstrate that it is possible to create organizational learning and development through collaborative, dialogic practices in groups and teams, for instance combined with the use of roleplaying. In the work...... with the thesis, dialogically based practices inspired by action research with the aim to enhance collaborative knowledge building, reflexivity and dialogical skills in groups and teams were carried out, analyzed and documented. Participants included school principals, leaders of kindergartens, teachers...

  16. Leading Hadron Production at HERA

    Directory of Open Access Journals (Sweden)

    Buniatyan Armen

    2013-06-01

    Full Text Available Data from the recent measurements of very forward baryon and photon production with the H1 and ZEUS detectors at electron-proton collider HERA are presented and compared to the theoretical calculations and Monte Carlo models. Results are presented of the production of leading protons, neutrons and photons in deep inelastic scattering (ep → e' pX, ep → e'nX, ep → e'γX as well as the leading neutron production in the photoproduction of dijets (ep → ejjXn. The forward baryon and photon results from the H1 and ZEUS Experiments are compared also with the models of the hadronic interactions of high energy Cosmic Rays. The sensitivity of the HERA data to the differences between the models is demonstrated.

  17. [Noroviruses: leading cause of gastroenteritis].

    Science.gov (United States)

    Delacour, H; Dubrous, P; Koeck, J L

    2010-04-01

    Although noroviruses were the first viral agents to be linked to gastrointestinal disease, they were long considered a secondary cause far behind rotaviruses. Development of molecular-based diagnostic techniques has provided clearer insight into the epidemiological impact of noroviruses that are now recognized not only as the leading cause of non-bacterial gastroenteritis outbreaks but also as an important cause of sporadic gastroenteritis in both children and adults. Norovirus infection is generally characterized by mild acute vomiting and diarrhea usually lasting for only a few days, but it can lead to more severe and potentially life-threatening symptoms in high-risk groups such as young children, elderly, and immunodeficient persons. It has been demonstrated that they are present in tropical countries. Molecular epidemiological studies have documented the great genetic diversity of noroviruses with regular emergence of variants. Since no vaccine is available, prevention on norovirus infection depends mainly on strict personal and community hygiene measures.

  18. Deformation properties of lead isotopes

    Energy Technology Data Exchange (ETDEWEB)

    Tolokonnikov, S. V.; Borzov, I. N.; Lutostansky, Yu. S.; Saperstein, E. E., E-mail: saper43-7@mail.ru [National Research Center Kurchatov Institute (Russian Federation)

    2016-01-15

    The deformation properties of a long lead isotopic chain up to the neutron drip line are analyzed on the basis of the energy density functional (EDF) in the FaNDF{sup 0} Fayans form. The question of whether the ground state of neutron-deficient lead isotopes can have a stable deformation is studied in detail. The prediction of this deformation is contained in the results obtained on the basis of the HFB-17 and HFB-27 Skyrme EDF versions and reported on Internet. The present analysis reveals that this is at odds with experimental data on charge radii and magnetic moments of odd lead isotopes. The Fayans EDF version predicts a spherical ground state for all light lead isotopes, but some of them (for example, {sup 180}Pb and {sup 184}Pb) prove to be very soft—that is, close to the point of a phase transition to a deformed state. Also, the results obtained in our present study are compared with the predictions of some other Skyrme EDF versions, including SKM*, SLy4, SLy6, and UNE1. By and large, their predictions are closer to the results arising upon the application of the Fayans functional. For example, the SLy4 functional predicts, in just the same way as the FaNDF{sup 0} functional, a spherical shape for all nuclei of this region. The remaining three Skyrme EDF versions lead to a deformation of some light lead isotopes, but their number is substantially smaller than that in the case of the HFB-17 and HFB-27 functionals. Moreover, the respective deformation energy is substantially lower, which gives grounds to hope for the restoration of a spherical shape upon going beyond the mean-field approximation, which we use here. Also, the deformation properties of neutron-rich lead isotopes are studied up to the neutron drip line. Here, the results obtained with the FaNDF{sup 0} functional are compared with the predictions of the HFB-17, HFB-27, SKM*, and SLy4 Skyrme EDF versions. All of the EDF versions considered here predict the existence of a region where neutron

  19. String Formation Beyond Leading Colour

    CERN Document Server

    Christiansen, Jesper R.

    2015-08-03

    We present a new model for the hadronisation of multi-parton systems, in which colour correlations beyond leading $N_C$ are allowed to influence the formation of confining potentials (strings). The multiplet structure of $SU(3)$ is combined with a minimisation of the string potential energy, to decide between which partons strings should form, allowing also for "baryonic" configurations (e.g., two colours can combine coherently to form an anticolour). In $e^+e^-$collisions, modifications to the leading-colour picture are small, suppressed by both colour and kinematics factors. But in $pp$ collisions, multi-parton interactions increase the number of possible subleading connections, counteracting their naive $1/N_C^2$ suppression. Moreover, those that reduce the overall string lengths are kinematically favoured. The model, which we have implemented in the PYTHIA 8 generator, is capable of reaching agreement not only with the important $\\left(n_\\mathrm{charged})$ distribution but also with measured rates (and ra...

  20. Lead and cadmium in food

    International Nuclear Information System (INIS)

    Gliesmann, S.; Kruse, H.; Kriews, M.; Mangels, H.

    1992-08-01

    The amounts of lead and cadmium produced and processed in these days are considerable. As a result, our environment is increasingly polluted by heavy metals and industrial installations, motor vehicles or incinerating plants appear to be among the main culprits here. Air and water are the media permitting the entry of heavy metals into our natural environment where they accumulate in the soil and then gradually migrate into the plants. Their further transport in the food constitutes the third step in the environmental spread of heavy metals. The consumption of muscle and organ meats, of vegetables, fruits, canned food and drinking water is unavoidably associated with some ingestion of lead and cadmium. The degree to which they are taken up and stored in different tissues is determined by absorption properties and the nutritional state of the organism. Cadmium tends to accumulate in the kidneys, lead is mainly stored in the bones. A continuously increasing uptake finally results in health injuries that range from unspecific complaints to damaged kidneys or bones and disorders of liver function. Children and elderly people are at a particular risk here. The level of food contamination is such that screening for heavy metals must be rigorously carried out once appropriate legal thresholds have been set, which ought to be based on proven detrimental effects of lead and cadmium on our health and also take account of infants and children or any other risk groups, where particular caution must be exercised. It should be pointed out that such thresholds have so far not been determined. (orig./MG) [de

  1. Leading Indian Business-Groups

    Directory of Open Access Journals (Sweden)

    Maria Alexandrovna Vorobyeva

    2016-01-01

    Full Text Available The goal of this paper is to investigate the evolution of the leading Indian business-groups under the conditions of economical liberalization. It is shown that the role of modern business-groups in the Indian economy is determined by their high rate in the gross domestic product (GDP, huge overall actives, substantial pert in the e[port of goods and services, as well as by their activities in modern branch structure formatting, and developing labor-intensive and high-tech branches. They strongly influence upon economical national strategies, they became a locomotive of internationalization and of transnationalization of India, the basis of the external economy factor system, the promoters of Indian "economical miracle" on the world scene, and the dynamical segment of economical and social development of modern India. The tendencies of the development of the leading Indian business groups are: gradual concentration of production in few clue sectors, "horizontal" structure, incorporation of the enterprises into joint-stock structure, attraction of hired top-managers and transnationaliziation. But against this background the leading Indian business-groups keep main traditional peculiarities: they mostly still belong to the families of their founders, even today they observe caste or communal relations which are the basis of their non-formal backbone tides, they still remain highly diversificated structures with weak interrelations. Specific national ambivalence and combination of traditions and innovations of the leading Indian business-groups provide their high vitality and stability in the controversial, multiform, overloaded with caste and confessional remains Indian reality. We conclude that in contrast to the dominant opinion transformation of these groups into multisectoral corporations of the western type is far from completion, and in the nearest perspective they will still possess all their peculiarities and incident social and economical

  2. Tevatron HTS power lead test

    International Nuclear Information System (INIS)

    Feher, S.; Carcagno, R.; Orris, D.; Pischalnikov, Y.; Sylvester, C.; Tartaglia, M.; Tompkins, J.C.

    2004-01-01

    Two pairs of ASC 6 kA power leads developed for the Tevatron were successfully tested at Fermilab at over-current conditions. Stable operation was achieved while operating at a current of 9.56 kA for five hours and while continuously ramping between 0-9.56 kA at a ramp rate of 200 A/s for one hour. The minimum required liquid nitrogen flow rate was measured to be 1.5 g/s at 10 kA. After ramping up to 10 kA at 200A/s, it took only 15 minutes to stabilize the upper copper section of the lead with a flow of 1.8 g/s of liquid nitrogen vapor. Testing under extreme operating conditions--270-370 kPa liquid nitrogen vapor pressure and over 0.1 T external magnetic field--demonstrated that the HTS part of the lead can safely operate in the current sharing mode and that this design has large operating margin

  3. The LHC Lead Injector Chain

    CERN Document Server

    Beuret, A; Blas, A; Burkhardt, H; Carli, Christian; Chanel, M; Fowler, A; Gourber-Pace, M; Hancock, S; Hourican, M; Hill, C E; Jowett, John M; Kahle, K; Küchler, D; Lombardi, A M; Mahner, E; Manglunki, Django; Martini, M; Maury, S; Pedersen, F; Raich, U; Rossi, C; Royer, J P; Schindl, Karlheinz; Scrivens, R; Sermeus, L; Shaposhnikova, Elena; Tranquille, G; Vretenar, Maurizio; Zickler, T

    2004-01-01

    A sizeable part of the LHC physics programme foresees lead-lead collisions with a design luminosity of 1027 cm-2 s-1. This will be achieved after an upgrade of the ion injector chain comprising Linac3, LEIR, PS and SPS machines [1,2]. Each LHC ring will be filled in 10 min by almost 600 bunches, each of 7×107 lead ions. Central to the scheme is the Low Energy Ion Ring (LEIR) [3,4], which transforms long pulses from Linac3 into high-brilliance bunches by means of multi-turn injection, electron cooling and accumulation. Major limitations along the chain, including space charge, intrabeam scattering, vacuum issues and emittance preservation are highlighted. The conversion from LEAR (Low Energy Antiproton Ring) to LEIR involves new magnets and power converters, high-current electron cooling, broadband RF cavities, and a UHV vacuum system with getter (NEG) coatings to achieve a few 10-12 mbar. Major hardware changes in Linac3 and the PS are also covered. An early ion scheme with fewer bunches (but each at nominal...

  4. WIPP Compliance Certification Application calculations parameters. Part 1: Parameter development

    International Nuclear Information System (INIS)

    Howarth, S.M.

    1997-01-01

    The Waste Isolation Pilot Plant (WIPP) in southeast New Mexico has been studied as a transuranic waste repository for the past 23 years. During this time, an extensive site characterization, design, construction, and experimental program was completed, which provided in-depth understanding of the dominant processes that are most likely to influence the containment of radionuclides for 10,000 years. Nearly 1,500 parameters were developed using information gathered from this program; the parameters were input to numerical models for WIPP Compliance Certification Application (CCA) Performance Assessment (PA) calculations. The CCA probabilistic codes frequently require input values that define a statistical distribution for each parameter. Developing parameter distributions begins with the assignment of an appropriate distribution type, which is dependent on the type, magnitude, and volume of data or information available. The development of the parameter distribution values may require interpretation or statistical analysis of raw data, combining raw data with literature values, scaling of lab or field data to fit code grid mesh sizes, or other transformation. Parameter development and documentation of the development process were very complicated, especially for those parameters based on empirical data; they required the integration of information from Sandia National Laboratories (SNL) code sponsors, parameter task leaders (PTLs), performance assessment analysts (PAAs), and experimental principal investigators (PIs). This paper, Part 1 of two parts, contains a discussion of the parameter development process, roles and responsibilities, and lessons learned. Part 2 will discuss parameter documentation, traceability and retrievability, and lessons learned from related audits and reviews

  5. Lead Tolerance and Accumulation in White Poplar Cultivated In Vitro

    Directory of Open Access Journals (Sweden)

    Branislav Kovačević

    2013-06-01

    Full Text Available Background and Purpose: This paper analyses the lead tolerance and accumulation in white poplar genotypes in vitro, in order to optimize genotype evaluation and other procedures in their implementation in phytoremediation projects and landscaping in areas endangered by lead accumulation. Material and Methods: The lead tolerance and accumulation of five white poplar genotypes after 35 days in vitro cultivation on media supplemented with lead was examined. The following Pb(NO32 concentrations were used: 0, 10-6, 10-5, 10-4 and 10-3 M. Tolerance analysis (described by tolerance indices was based on morphological parameters, biomass accumulation and the content of photosynthetic pigments, while lead accumulation was described by shoot lead accumulation and shoot lead content. Results and Conclusions: The chosen lead concentrations appeared not to be lethal. Moreover, the obtained results showed that the tested lead concentrations had a positive effect on: number of formed roots, shoot moisture content and shoot height. The best differentiation among the examined genotypes was gained by the tolerance index based on the shoot height on 10-4 M Pb(NO32. The shoot lead accumulation and shoot lead content significantly increased on 10-4 and 10-3 M Pb(NO32 media. Thus, the concentration of 10-4 M Pb(NO32 is recommended for further research. Two examined genotypes of horticultural value (LCM and LBM achieved a significantly higher lead shoot content compared to the wide spread genotype “Villafranca” (almost 200% and 125% higher, respectively.

  6. Natural convection in enclosures containing lead-bismuth and lead

    International Nuclear Information System (INIS)

    Dzodzo, M.; Cuckovic-Dzodzo, D.

    2001-01-01

    The design of liquid metal reactors such as Encapsulated Nuclear Heat Source (ENHS) which are based predominantly on the flow generated by natural convection effects demands knowledge of velocity and temperature fields, distribution of the local Nusselt numbers and values of the average Nusselt numbers for small coolant velocity regimes. Laminar natural convection in rectangular enclosures with different aspect ratios, containing lead-bismuth and lead is studied numerically in this paper. The numerical model takes into account variable properties of the liquid metals. The developed correlation for average Nusselt numbers is presented. It is concluded that average Nusselt numbers are lower than in 'normal' fluids (air, water and glycerol) for the same values of Rayleigh numbers. However, the heat flux, which can be achieved, is greater due to the high thermal conductivity of liquid metals. Some specific features of the flow fields generated by natural convection in liquid metals are presented. Their consequences on the design of heat exchangers for liquid metals are discussed. An application of the obtained results to the design of a new type of steam generator, which integrates the intermediate heat exchanger and secondary pool functions of the ENHS reactor, is presented. (authors)

  7. Radiography of Co-60 in the lead cube castings

    International Nuclear Information System (INIS)

    Djoli Soembogo; Harun Al Rasyid R; Namad Sianta

    2016-01-01

    Radiography Co-60 on Carbon steel or Stainless steel has been widely applied, but for metal Lead has not yet been applied and has not yet widely known. Lead has a greater density than Carbon steel or Stainless steel and could muffle gamma radiation so it takes a longer exposure time. The result of its film radiography are also not as good as compared to radiography applications on carbon steel or Stainless steel. The study also applied digital radiography using isotope Co-60 sources and used Epson V700 scanner positive film for digitization results of conventional radiographic films. These radiographs using film AGFA D7 to get the contrast medium, medium sensitivity and good image quality. The purpose of radiography Co-60 on the cube castings Lead is to find indications of defective castings cube Lead and digitizing the results using conventional radiographic film with a positive film media scanner to process the data transfer and storage of digital data. Radiographic testing has been carried out using the isotope Co-60 on metal castings Lead with a single thickness of a single shadow method using positive film scanner media and isotope Co-60 with disabilities observation parameter Lead metal castings on radiographic film. Co-60 radiation time exposure is 3,500 hours for the thickness of the metal cube castings Lead 100 mm with the activity of 29 Ci and perpendicular SFD of 840 mm. Radiographic testing on metal cube castings Lead by the method of a single thickness of single image defects produce a parameter indicative for a cube of metal castings Lead of porosity level 2. The density mean of radiographic film was 2.051 and 2.046 for 5 minutes in a developer solution. The result of scanning positive film is in the form of digital radiography which allows for the transfer of digital data or computerized storage of digital data. This status is still within limits acceptable under the standards referred. (author)

  8. Effects of lead on lactating rats and their sucklings

    Energy Technology Data Exchange (ETDEWEB)

    Roels, H; Lauwerys, R; Buchet, J P; Hubermont, G

    1977-08-01

    Lead was administered to lactating rats in drinking water (0, 1, 10, and 100 ppM) from the day of delivery up to day 21 after delivery, at which time the mothers and their newborns were sacrificed. Various parameters of blood: lead concentration (Pb-B), hematocrit (Htc), hemoglobin (Hb), free erythrocyte porphyrin concentration (FEP), delta-aminolevulinate dehydratase activity (ALAD)--and of tissue: ALAD activity, free tissue porphyrin concentration (FTP) and lead concentration (Pb-T) were determined. In mothers, a significant increase of Pb-B and a reduction of ALAD activity of blood were found in the 100 ppM group. In tissues Pb was significantly increased in liver of the 100 ppM group and in kidney of the 10 and 100 ppM groups. None of the biochemical parameters measured in tissues was significantly modified. In suckling rats an increase in Pb-B and a reduction of ALAD activity in blood were found in the 10 and 100 ppM lead groups. Pb concentration was significantly increased in liver, kidney and brain of the 100 ppM group and in kidney of the 10 ppM group. Lead storage in kidney of the 100 ppM group was associated with a marked increase in FTP and a slight reduction in ALAD activity. On the basis of the biochemical parameters studied in the newborn rats, the ''no-effect'' level of lead administered in drinking water during lactation is around 1 ppM, which is rather similar to that found when lead was administered to the mother before and/or during pregnancy.

  9. Correlations in particle production in proton-lead and lead-lead collisions at the LHC

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00361447

    In high-energy heavy-ion collisions at the Large Hadron Collider (LHC), a hot and dense state of matter called the Quark-Gluon Plasma (QGP) is formed. The initial collision geometry and the subsequent expansion during the QGP stage result in the correlations of produced particles, through which the properties of the QGP can be investigated. Two analyses based on the geometrical correlations of produced particles, one in proton-lead (p–Pb) collisions and the other in lead-lead (Pb–Pb) collisions, are presented in this thesis. The data analyzed in this thesis were collected with the ALICE detector at the LHC in p– Pb collisions at a nucleon–nucleon center-of-mass energy of 5.02 TeV, and Pb–Pb collisions at a nucleon–nucleon center-of-mass energy of 2.76 TeV. In the forward-central two-particle correlation analysis in p–Pb collisions, two-particle an- gular correlations between trigger particles in the forward pseudorapidity range (2.5 < |η| < 4.0) and associated particles in the central ran...

  10. Determination of lead 210 atmospheric fluxes in Syria

    International Nuclear Information System (INIS)

    Al-Masri, M. S.; Shaik Khalil, H.

    2001-01-01

    Lead 210 atmospheric fluxes were determined by collecting 51 profiles from Syrian soil during 1998. Lead 210 fluxes in Syria calculated from lead 210 inventory in soil ranged from 15 Bq.m -2 .y -1 and 407 Bq.m -2 .y -1 with an average value of 128 Bq.m -2 .y -1 . the highest fluxes were found to be in Hama area due to the Gaab fault, which is considered as a radon source in the area. In addition, fluxes were also high in most sites, which are located in Syria valleys and around the lakes. Moreover, the study has indicated that there is no linear relation between lead 210 flux values and other parameters such as annual rainfall and bulk density of the soil. On the other hand, an effect, of those two factors on lead 210 distribution with depth has been observed. In addition, the results of variable lead 210 fluxes from site to another have proved that it is necessary, in order to obtain a representative mean value of lead 210 flux obtained in this study is within the worldwide range for lead 210 flux. (Author)

  11. Planck 2015 results. XIII. Cosmological parameters

    CERN Document Server

    Ade, P.A.R.; Arnaud, M.; Ashdown, M.; Aumont, J.; Baccigalupi, C.; Banday, A.J.; Barreiro, R.B.; Bartlett, J.G.; Bartolo, N.; Battaner, E.; Battye, R.; Benabed, K.; Benoit, A.; Benoit-Levy, A.; Bernard, J.P.; Bersanelli, M.; Bielewicz, P.; Bonaldi, A.; Bonavera, L.; Bond, J.R.; Borrill, J.; Bouchet, F.R.; Boulanger, F.; Bucher, M.; Burigana, C.; Butler, R.C.; Calabrese, E.; Cardoso, J.F.; Catalano, A.; Challinor, A.; Chamballu, A.; Chary, R.R.; Chiang, H.C.; Chluba, J.; Christensen, P.R.; Church, S.; Clements, D.L.; Colombi, S.; Colombo, L.P.L.; Combet, C.; Coulais, A.; Crill, B.P.; Curto, A.; Cuttaia, F.; Danese, L.; Davies, R.D.; Davis, R.J.; de Bernardis, P.; de Rosa, A.; de Zotti, G.; Delabrouille, J.; Desert, F.X.; Di Valentino, E.; Dickinson, C.; Diego, J.M.; Dolag, K.; Dole, H.; Donzelli, S.; Dore, O.; Douspis, M.; Ducout, A.; Dunkley, J.; Dupac, X.; Efstathiou, G.; Elsner, F.; Ensslin, T.A.; Eriksen, H.K.; Farhang, M.; Fergusson, J.; Finelli, F.; Forni, O.; Frailis, M.; Fraisse, A.A.; Franceschi, E.; Frejsel, A.; Galeotta, S.; Galli, S.; Ganga, K.; Gauthier, C.; Gerbino, M.; Ghosh, T.; Giard, M.; Giraud-Heraud, Y.; Giusarma, E.; Gjerlow, E.; Gonzalez-Nuevo, J.; Gorski, K.M.; Gratton, S.; Gregorio, A.; Gruppuso, A.; Gudmundsson, J.E.; Hamann, J.; Hansen, F.K.; Hanson, D.; Harrison, D.L.; Helou, G.; Henrot-Versille, S.; Hernandez-Monteagudo, C.; Herranz, D.; Hildebrandt, S.R.; Hivon, E.; Hobson, M.; Holmes, W.A.; Hornstrup, A.; Hovest, W.; Huang, Z.; Huffenberger, K.M.; Hurier, G.; Jaffe, A.H.; Jaffe, T.R.; Jones, W.C.; Juvela, M.; Keihanen, E.; Keskitalo, R.; Kisner, T.S.; Kneissl, R.; Knoche, J.; Knox, L.; Kunz, M.; Kurki-Suonio, H.; Lagache, G.; Lahteenmaki, A.; Lamarre, J.M.; Lasenby, A.; Lattanzi, M.; Lawrence, C.R.; Leahy, J.P.; Leonardi, R.; Lesgourgues, J.; Levrier, F.; Lewis, A.; Liguori, M.; Lilje, P.B.; Linden-Vornle, M.; Lopez-Caniego, M.; Lubin, P.M.; Macias-Perez, J.F.; Maggio, G.; Mandolesi, N.; Mangilli, A.; Marchini, A.; Martin, P.G.; Martinelli, M.; Martinez-Gonzalez, E.; Masi, S.; Matarrese, S.; Mazzotta, P.; McGehee, P.; Meinhold, P.R.; Melchiorri, A.; Melin, J.B.; Mendes, L.; Mennella, A.; Migliaccio, M.; Millea, M.; Mitra, S.; Miville-Deschenes, M.A.; Moneti, A.; Montier, L.; Morgante, G.; Mortlock, D.; Moss, A.; Munshi, D.; Murphy, J.A.; Naselsky, P.; Nati, F.; Natoli, P.; Netterfield, C.B.; Norgaard-Nielsen, H.U.; Noviello, F.; Novikov, D.; Novikov, I.; Oxborrow, C.A.; Paci, F.; Pagano, L.; Pajot, F.; Paladini, R.; Paoletti, D.; Partridge, B.; Pasian, F.; Patanchon, G.; Pearson, T.J.; Perdereau, O.; Perotto, L.; Perrotta, F.; Pettorino, V.; Piacentini, F.; Piat, M.; Pierpaoli, E.; Pietrobon, D.; Plaszczynski, S.; Pointecouteau, E.; Polenta, G.; Popa, L.; Pratt, G.W.; Prezeau, G.; Prunet, S.; Puget, J.L.; Rachen, J.P.; Reach, W.T.; Rebolo, R.; Reinecke, M.; Remazeilles, M.; Renault, C.; Renzi, A.; Ristorcelli, I.; Rocha, G.; Rosset, C.; Rossetti, M.; Roudier, G.; d'Orfeuil, B.Rouille; Rowan-Robinson, M.; Rubino-Martin, J.A.; Rusholme, B.; Said, N.; Salvatelli, V.; Salvati, L.; Sandri, M.; Santos, D.; Savelainen, M.; Savini, G.; Scott, D.; Seiffert, M.D.; Serra, P.; Shellard, E.P.S.; Spencer, L.D.; Spinelli, M.; Stolyarov, V.; Stompor, R.; Sudiwala, R.; Sunyaev, R.; Sutton, D.; Suur-Uski, A.S.; Sygnet, J.F.; Tauber, J.A.; Terenzi, L.; Toffolatti, L.; Tomasi, M.; Tristram, M.; Trombetti, T.; Tucci, M.; Tuovinen, J.; Turler, M.; Umana, G.; Valenziano, L.; Valiviita, J.; Van Tent, B.; Vielva, P.; Villa, F.; Wade, L.A.; Wandelt, B.D.; Wehus, I.K.; White, M.; White, S.D.M.; Wilkinson, A.; Yvon, D.; Zacchei, A.; Zonca, A.

    2016-01-01

    We present results based on full-mission Planck observations of temperature and polarization anisotropies of the CMB. These data are consistent with the six-parameter inflationary LCDM cosmology. From the Planck temperature and lensing data, for this cosmology we find a Hubble constant, H0= (67.8 +/- 0.9) km/s/Mpc, a matter density parameter Omega_m = 0.308 +/- 0.012 and a scalar spectral index with n_s = 0.968 +/- 0.006. (We quote 68% errors on measured parameters and 95% limits on other parameters.) Combined with Planck temperature and lensing data, Planck LFI polarization measurements lead to a reionization optical depth of tau = 0.066 +/- 0.016. Combining Planck with other astrophysical data we find N_ eff = 3.15 +/- 0.23 for the effective number of relativistic degrees of freedom and the sum of neutrino masses is constrained to < 0.23 eV. Spatial curvature is found to be |Omega_K| < 0.005. For LCDM we find a limit on the tensor-to-scalar ratio of r <0.11 consistent with the B-mode constraints fr...

  12. The art of leading meetings.

    Science.gov (United States)

    English, C B

    1987-05-01

    The ability to skillfully lead meetings can contribute to a manager's effectiveness. There are four types of meetings, each serving different needs and requiring different leadership. A manager must know when to hold meetings, what leadership style is appropriate, how and when to use participative management, and how to facilitate a consensus. Considerable planning must be done before a meeting is held. Various leadership and communication skills are required to effectively open, conduct, and close a meeting. Finally, the leader needs to know how to deal with participants who become problems.

  13. Lead-nickel electrochemical batteries

    CERN Document Server

    Glaize, Christian

    2012-01-01

    The lead-acid accumulator was introduced in the middle of the 19th Century, the diverse variants of nickel accumulators between the beginning and the end of the 20th Century. Although old, these technologies are always very present on numerous markets. Unfortunately they are still not used in optimal conditions, often because of the misunderstanding of the internal electrochemical phenomena.This book will show that batteries are complex systems, made commercially available thanks to considerable amounts of scientific research, empiricism and practical knowledge. However, the design of

  14. Lead reactor strategy economical analysis

    International Nuclear Information System (INIS)

    Ciotti, Marco

    2013-01-01

    Conclusions: • A first attempt to evaluate LFR power plant electricity production cost has been performed; • Electricity price is similar to Gen III + plants; • The estimation accuracy is probably low; • Possible costs reduction could arise from coolant characteristics that may improve safety and simplicity by design; • Accident perception, not acceptable by public opinion, may be changed with low potential energy system (non exploding coolant); • Sustainability improvement could open to a better Public acceptance, depending on us. • Problems may arise in coupling a high capital cost low fuel cost plant in a grid with large amount of intermittent sources with priority dispatch. • Lead fast reactors can compete

  15. Soft mode of lead zirconate

    International Nuclear Information System (INIS)

    Pan'ko, G.F.; Prisedskij, V.V.; Klimov, V.V.

    1983-01-01

    Anisotropic diffusional scattering of electrons on PbZrO 3 crystal in the temperature range of phase transition has been recorded. As a result of its analysis it has been established that in lead zirconate the rotational vibrational mode G 25 plays the role of soft mode. The experiment is carried out using PbZrO 3 monocrystals in translucent electron microscope EhM-200, operating in the regime of microdiffraction at accelerating voltage of 150 kV and beam current 50 μA; sample preparation is realized using the method of shearing and fragmentation

  16. Experimental lead intoxication in dogs: a comparison of blood lead and urinary delta-aminolevulinic acid following intoxication and chelation therapy.

    Science.gov (United States)

    Green, R A; Selby, L A; Zumwalt, R W

    1978-01-01

    Intravenous lead administration to dogs produced an acute syndrome of lead intoxication charcterized by depression, vomiting, anorexia and weight loss. The effect of chelation therapy with calcium disodium ethylene diamine tetraacetate, penicillamine or both was determined by serially monitoring changes in blood lead and urine delta-aminolevulinic acid. Following therapy, blood lead values were significantly lower in chelated dogs than non-treated lead exposed dogs on days 7 and 10. Urine delta-aminolevulinic acid at day 7 was significantly higher in untreated lead exposed dogs than in other groups. There was no significant difference in blood lead or urine delta-aminolevulinic acid between lead intoxicated dogs which underwent the indicated chelation therapy protocols. There was, however, a trend for higher urinary delta-aminolevulinic acid excretion in those intoxicated dogs undergoing calcium disodium ethylene diamine tetraacetate therapy as opposed to those undergoing penicilamine therapy. There was no significant correlation between blood lead and urinary delta-aminolevulinic acid previous to lead exposure. However, after lead exposure significant correlation was present at days 4, 7, 10 and 14. Certain lead exposed dogs following chelation therapy were noted to have normal blood lead levels but elevated urinary delta-aminolevulinic acid suggesting that blood lead does not always correlate with metabolic effects of lead in the body. Urinary delta-aminolevulinic acid was therefore recommended as an additional laboratory parameter which improved assessment of lead exposure in dogs, particularly in determining adequacy of chelation therapy. PMID:667707

  17. Influence of minerals on lead-induced alterations in liver function in rats exposed to long-term lead exposure

    International Nuclear Information System (INIS)

    Herman, D'souza Sunil; Geraldine, Menezes; T, Venkatesh

    2009-01-01

    The objective of this study was to evaluate the role of minerals on lead-induced effect on the liver. Differentiation of minerals and heavy metals pose an inherent problem due to certain common properties shared by them. With this approach to the problem of heavy metal toxicity, in the present study two groups of male Wistar albino rats, one group (well-nourished) fed on mineral rich diet and other group (undernourished) fed on diet without mineral supplements were used. Both the groups of rats were subjected to long-term lead exposure. The diet of well-nourished group was supplemented with calcium (Ca); 1.2%, phosphorous (P); 0.6%, iron (Fe); 90 mg/kg, zinc (Zn); 50 mg/kg, magnesium (Mg); 0.08%, manganese (Mn); 70 mg/kg, selenium (Se); 0.2 mg/kg, copper (Cu); 5 mg/kg, molybdenum (Mo); 0.8 mg/kg, iodine (I); 0.6 mg/kg, cobalt (Co); 3.0 mg/kg. Their blood lead and parameters of liver function were monitored periodically. Results of the study showed a very high statistically significant increase (p < 0.001) in the blood lead (PbB) levels and liver function test parameters in the undernourished subjects compared to the well-nourished subjects. Nutritional management of lead poisoning is of importance since essential elements and toxic heavy metals may interact to minimize the absorption of lead.

  18. Influence of minerals on lead-induced alterations in liver function in rats exposed to long-term lead exposure

    Energy Technology Data Exchange (ETDEWEB)

    Herman, D' souza Sunil, E-mail: hermansdsouza@rediffmail.com [Department of Biotechnology, Manipal Life Sciences Centre, KMC, Manipal University, Manipal (India); Geraldine, Menezes, E-mail: gere1@rediffmail.com [Department of Biochemistry and Biophysics, St. John' s Medical College, Koramangala, Bangalore 560034, Karnataka (India); T, Venkatesh, E-mail: venky_tv@hotmail.com [Department of Biochemistry and Biophysics, St. John' s Medical College, Koramangala, Bangalore 560034, Karnataka (India)

    2009-07-30

    The objective of this study was to evaluate the role of minerals on lead-induced effect on the liver. Differentiation of minerals and heavy metals pose an inherent problem due to certain common properties shared by them. With this approach to the problem of heavy metal toxicity, in the present study two groups of male Wistar albino rats, one group (well-nourished) fed on mineral rich diet and other group (undernourished) fed on diet without mineral supplements were used. Both the groups of rats were subjected to long-term lead exposure. The diet of well-nourished group was supplemented with calcium (Ca); 1.2%, phosphorous (P); 0.6%, iron (Fe); 90 mg/kg, zinc (Zn); 50 mg/kg, magnesium (Mg); 0.08%, manganese (Mn); 70 mg/kg, selenium (Se); 0.2 mg/kg, copper (Cu); 5 mg/kg, molybdenum (Mo); 0.8 mg/kg, iodine (I); 0.6 mg/kg, cobalt (Co); 3.0 mg/kg. Their blood lead and parameters of liver function were monitored periodically. Results of the study showed a very high statistically significant increase (p < 0.001) in the blood lead (PbB) levels and liver function test parameters in the undernourished subjects compared to the well-nourished subjects. Nutritional management of lead poisoning is of importance since essential elements and toxic heavy metals may interact to minimize the absorption of lead.

  19. String formation beyond leading colour

    Energy Technology Data Exchange (ETDEWEB)

    Christiansen, Jesper R. [Department of Astronomy and Theoretical Physics, Lund University,Sölvegatan 14, Lund (Sweden); Theoretical Physics, CERN,CH-1211, Geneva 23 (Switzerland); Skands, Peter Z. [Theoretical Physics, CERN,CH-1211, Geneva 23 (Switzerland); School of Physics and Astronomy, Monash University,VIC-3800 (Australia)

    2015-08-03

    We present a new model for the hadronisation of multi-parton systems, in which colour correlations beyond leading N{sub C} are allowed to influence the formation of confining potentials (strings). The multiplet structure of SU(3) is combined with a minimisation of the string potential energy, to decide between which partons strings should form, allowing also for “baryonic” configurations (e.g., two colours can combine coherently to form an anticolour). In e{sup +}e{sup −}collisions, modifications to the leading-colour picture are small, suppressed by both colour and kinematics factors. But in pp collisions, multi-parton interactions increase the number of possible subleading connections, counteracting their naive 1/N{sub C}{sup 2} suppression. Moreover, those that reduce the overall string lengths are kinematically favoured. The model, which we have implemented in the PYTHIA 8 generator, is capable of reaching agreement not only with the important 〈p{sub ⊥}〉(n{sub charged}) distribution but also with measured rates (and ratios) of kaons and hyperons, in both ee and pp collisions. Nonetheless, the shape of their p{sub ⊥} spectra remains challenging to explain.

  20. Lead -- supply/demand outlook

    International Nuclear Information System (INIS)

    Schnull, T.

    1999-01-01

    As Japan goes--so goes the world. That was the title of a recent lead article in The Economist that soberly discussed the potential of much more severe global economic problems occurring, if rapid and coordinated efforts were not made to stabilize the economic situation in Asia in general, and in Japan in particular. During the first 6 months of last year, commodity markets reacted violently to the spreading economic problems in Asia. More recent currency and financial problems in Russia have exacerbated an already unpleasant situation. One commodity after another--including oil, many of the agricultural commodities, and each of the base metals--have dropped sharply in price. Many are now trading at multiyear lows. Until there is an overall improvement in the outlook for these regions, sentiment will likely continue to be negative, and metals prices will remain under pressure. That being said, lead has maintained its value better than many other commodities during these difficult times, finding support in relatively strong fundamentals. The author takes a closer look at those supply and demand fundamentals, beginning with consumption

  1. All roads lead to Meyrin

    CERN Multimedia

    Communication locale

    2011-01-01

    Tous les chemins mènent à Meyrin - All roads lead to Meyrin From 29 September to 16 October, 2011, come to the Salle Antoine Verchère in Meyrin for Tous les chemins mènent à Meyrin. The celebration will include an exposition as well as a theatrical performance about Meyrin, the first satellite city in Switzerland. With the help of the memories and testimonies from the people of Meyrin, Tous les chemins mènent à Meyrin is putting the collective memories of the commune on display. It is an occasion for everyone, whether you're from near or far, to find out how all the roads lead to Meyrin.  Salle Antoine-Verchère Route de Meyrin 294 – 1217 Meyrin Tram 18 – Stop: Meyrin Village Thursdays / Fridays / Saturdays at 8pm Sundays at 5pm Regular ticket: CHF 15.- Concession ticket (students, chômeurs, AVS, AI): CHF 12.- Children up to 16: CHF 10.- Family ticket: CHF 35.-

  2. Finland's leading natural gas company

    International Nuclear Information System (INIS)

    Anon.

    2000-01-01

    The ownership structure of Finland's leading natural gas company, Gasum, changed fundamentally in 1999, and the company is now no longer a subsidiary of Fortum Corporation. 'Our new strong and broad ownership base will enable us to develop the natural gas business and pipeline network in Finland in response to the requirements of our Finnish customers', says Antero Jaennes, Gasum's Chairman and CEO, who stresses that Gasum is committed to remaining the leading developer of the Finnish natural gas market and the number-one gas supplier. Natural gas usage in Finland in 1999 totalled 3.9 billion m 3 (38.7 TWh), unchanged from 1998. Natural gas accounted for 11% of Finland's total primary energy need, as it did in 1998. The proportion of natural gas used in district heating rose by 2% to 36%, and moved down 2% in power generation to 10%. Industry's use of natural gas fell 1% to 17%. 75% of natural gas was used in combined heat and power (CHP) generation in industry and district heating. In 2000, Gasum expects to sell 4 billion m 3 of natural gas (40 TWh)

  3. Recycling abandoned lead battery sites

    International Nuclear Information System (INIS)

    Montgomery, A.H.

    1993-01-01

    In the past, automobile batteries were recycled principally for their lead content. The waste generated at battery wrecking facilities consisted of spent acid, crushed casings (ebonite and plastic), and where secondary smelting was involved, matte, slag, and carbon from the smelting process. These waste products were generally disposed in an on-site in a landfill or stored in piles. If the facility shut down because further commercial operations were not financially viable, the waste piles remained to be addressed at a later date through remedial action or reclamation programs. There are many of these facilities in the US. Nationally, about 28 sites have been discovered by the US Environmental Protection Agency (EPA) under the Superfund program and are under investigation or administrative orders for remedial action. A major remediation effort is now underway at the Gould Superfund Site in Portland, Oregon, which was operated as a secondary smelting facility between 1949 and 1981. This paper describes the nature of the contamination at the Gould site and the work conducted by Canonie Environmental Services Corp. (Canonie) to develop a process which would treat the waste from battery wrecking operations and produce revenue generating recyclable products while removing the source contamination (lead) from the site. The full-scale commercial plant is now operating and is expected to achieve a throughput rate of between 200 and 250 tons per day in the coming weeks

  4. Lead pollution, disease, and behaviour

    Energy Technology Data Exchange (ETDEWEB)

    Bryce-Smith, D; Waldron, H A

    1974-01-01

    Sources and health effects of atmospheric lead pollution are reviewed. Most of the Pb in gasoline is emitted in the exhaust gases as an aerosol containing particles of inorganic Pb. Some organic Pb is present, but the amount is usually less than 10% of the total. The size of these particles (0.18 to 0.90 micron) ensures maximum pulmonary penetration and absorption. The fallout of airborne particles produces very high concentrations of Pb in city dust, both inside and outside houses. Unpolluted soil contains about 15 ppM Pb, but samples of city dust contain 1000 to 6000 ppM. A daily intake of as little as 30 mg of dust containing 3% Pb produces clinical Pb poisoning in a few months. There is clear evidence to support the thesis that current levels in the environment are capable of producing behavioral abnormalities of types associated with educational disorders and delinquency, and also evidence that delinquents tend to have abnormal lead metabolism.

  5. Electrowinning of lead powder from chloride leach liquor

    Energy Technology Data Exchange (ETDEWEB)

    Owais, Ashour [Suez Canal Univ., Suez (Egypt). Metallurgical and Materials Engineering Dept.

    2012-11-15

    Electrowinning of lead powder from chloride leach liquor obtained from secondary lead slag leached in hydrochloric acid is the main aim of this work. The resulted lead chloride solution (leachate) containing 2.2 wt.-% Pb and 1.24 wt.-% HCl was electrowon in an electrolytic cell containing one graphite plate as inert anode and two lead sheets as starting permanent cathodes. Different electrolysis parameters such as current density, electrolyte temperature and electrolyte stirring rate were studied. As indicated by SEM, EDX and XRD analyses, fine and pure (100 % Pb) powders with a dispersed and needle-like shape were formed with cathodic current efficiency up to 67.9 % and electrical energy demand ranges from 0.809 to 4.998 kWh/kg Pb with productivity up to 2.63 g/Ah. (orig.)

  6. Remediation of lead from lead electroplating industrial effluent using sago waste.

    Science.gov (United States)

    Jeyanthi, G P; Shanthi, G

    2007-01-01

    Heavy metals are known toxicants, which inflict acute disorders to the living beings. Electroplating industries pose great threat to the environment through heavy load of metals in the wastewater discharged on land and water sources. In the present study, sago processing waste, which is both a waste and a pollutant, was used to adsorb lead ions from lead electroplating industrial effluent. Two types of sago wastes, namely, coarse sago waste and fine sago waste were used to study their adsorption capacity with the batch adsorption and Freundlich adsorption isotherm. The parameters that were considered for batch adsorption were pH (4, 5 and 6), time of contact (1, 2 and 3 hrs), temperature (30, 37 and 45 degrees C) and dosage of the adsorbent (2,4 and 6 g/L). The optimal condition for the effective removal of lead was found to be pH 5, time of contact 3 hrs, temperature 30 degrees C and dosage 4 g/L with coarse sago waste than fine sago waste.

  7. Determination of complex microcalorimeter parameters with impedance measurements

    International Nuclear Information System (INIS)

    Saab, T.; Bandler, S.R.; Chervenak, J.; Figueroa-Feliciano, E.; Finkbeiner, F.; Iyomoto, N.; Kelley, R.L.; Kilbourne, C.A.; Lindeman, M.A.; Porter, F.S.; Sadleir, J.

    2006-01-01

    The proper understanding and modeling of a microcalorimeter's response requires accurate knowledge of a handful of parameters, such as C, G, α. While a few of these parameters are directly determined from the IV characteristics, some others, notoriously the heat capacity (C) and α, appear in degenerate combinations in most measurable quantities. The consideration of a complex microcalorimeter leads to an added ambiguity in the determination of the parameters. In general, the dependence of the microcalorimeter's complex impedance on these various parameters varies with frequency. This dependence allows us to determine individual parameters by fitting the prediction of the microcalorimeter model to impedance data. In this paper we describe efforts at characterizing the Goddard X-ray microcalorimeters. With the parameters determined by this method, we compare the pulse shape and noise spectra predictions to data taken with the same devices

  8. Improved Estimates of Thermodynamic Parameters

    Science.gov (United States)

    Lawson, D. D.

    1982-01-01

    Techniques refined for estimating heat of vaporization and other parameters from molecular structure. Using parabolic equation with three adjustable parameters, heat of vaporization can be used to estimate boiling point, and vice versa. Boiling points and vapor pressures for some nonpolar liquids were estimated by improved method and compared with previously reported values. Technique for estimating thermodynamic parameters should make it easier for engineers to choose among candidate heat-exchange fluids for thermochemical cycles.

  9. What is lead-based paint?

    International Nuclear Information System (INIS)

    Vernon, L.S.

    1994-01-01

    The number of variety of lead-abatement regulations and requirements make it difficult and confusing to identify and properly respond to dangerous levels of lead in every situation. Definitions of ''lead-based paint'' and three test methods for lead detection are described to help determine when and how to test for the presence of lead

  10. Systematic of delayed neutron parameters

    International Nuclear Information System (INIS)

    Isaev, S.G.; Piksaikin, V.M.

    2000-01-01

    The experimental studies of the energy dependence of the delayed neutron (DN) parameters for various fission systems has shown that the behaviour of a some combination of delayed neutron parameters has a similar features. On the basis of this findings the systematics of delayed neutron experimental data for thorium, uranium, plutonium and americium isotopes have been investigated with the purpose to find a correlation of DN parameters with characteristics of fissioning system as well as a correlation between the delayed neutron parameters themselves. It was presented the preliminary results which were obtained during study the physics interpretation of the results [ru

  11. Lead poisoning in small animals

    Energy Technology Data Exchange (ETDEWEB)

    Scott, H M

    1963-08-17

    During the period 1957 to 1959 a considerable number of dogs were seen which were suffering from colic. Colic is not normally a condition commonly encountered in the dog, and the number of cases seen was large in proportion to the number of dogs in the population concerned. A number of other dogs exhibited nervous signs which varied from symptoms of mild anxiety to exaggerated fits. There was a certain amount of overlapping between the 2 groups in that some cases which originally only showed signs of colic later progressed to the stage where they showed nervous symptoms. The following report deals with 28 cases of lead poisoning in dogs and cats which occurred at Broken Hill, Northern Rhodesia. 8 references, 4 tables.

  12. Anti-cancer Lead Molecule

    KAUST Repository

    Sagar, Sunil

    2014-04-17

    Derivatives of plumbagin can be selectively cytotoxic to breast cancer cells. Derivative `A` (Acetyl Plumbagin) has emerged as a lead molecule for testing against estrogen positive breast cancer and has shown low hepatotoxicity as well as overall lower toxicity in nude mice model. The toxicity of derivative `A` was determined to be even lower than vehicle control (ALT and AST markers). The possible mechanism of action identified based on the microarray experiments and pathway mapping shows that derivative `A` could be acting by altering the cholesterol-related mechanisms. The low toxicity profile of derivative `A` highlights its possible role as future anti-cancer drug and/or as an adjuvant drug to reduce the toxicity of highly toxic chemotherapeutic drugs

  13. Anti-cancer Lead Molecule

    KAUST Repository

    Sagar, Sunil; Kaur, Mandeep; Esau, Luke E.

    2014-01-01

    Derivatives of plumbagin can be selectively cytotoxic to breast cancer cells. Derivative `A` (Acetyl Plumbagin) has emerged as a lead molecule for testing against estrogen positive breast cancer and has shown low hepatotoxicity as well as overall lower toxicity in nude mice model. The toxicity of derivative `A` was determined to be even lower than vehicle control (ALT and AST markers). The possible mechanism of action identified based on the microarray experiments and pathway mapping shows that derivative `A` could be acting by altering the cholesterol-related mechanisms. The low toxicity profile of derivative `A` highlights its possible role as future anti-cancer drug and/or as an adjuvant drug to reduce the toxicity of highly toxic chemotherapeutic drugs

  14. Making and Breaking of Lead Halide Perovskites

    KAUST Repository

    Manser, Joseph S.

    2016-02-16

    A new front-runner has emerged in the field of next-generation photovoltaics. A unique class of materials, known as organic metal halide perovskites, bridges the gap between low-cost fabrication and exceptional device performance. These compounds can be processed at low temperature (typically in the range 80–150 °C) and readily self-assemble from the solution phase into high-quality semiconductor thin films. The low energetic barrier for crystal formation has mixed consequences. On one hand, it enables inexpensive processing and both optical and electronic tunability. The caveat, however, is that many as-formed lead halide perovskite thin films lack chemical and structural stability, undergoing rapid degradation in the presence of moisture or heat. To date, improvements in perovskite solar cell efficiency have resulted primarily from better control over thin film morphology, manipulation of the stoichiometry and chemistry of lead halide and alkylammonium halide precursors, and the choice of solvent treatment. Proper characterization and tuning of processing parameters can aid in rational optimization of perovskite devices. Likewise, gaining a comprehensive understanding of the degradation mechanism and identifying components of the perovskite structure that may be particularly susceptible to attack by moisture are vital to mitigate device degradation under operating conditions. This Account provides insight into the lifecycle of organic–inorganic lead halide perovskites, including (i) the nature of the precursor solution, (ii) formation of solid-state perovskite thin films and single crystals, and (iii) transformation of perovskites into hydrated phases upon exposure to moisture. In particular, spectroscopic and structural characterization techniques shed light on the thermally driven evolution of the perovskite structure. By tuning precursor stoichiometry and chemistry, and thus the lead halide charge-transfer complexes present in solution, crystallization

  15. Is Your Child Safe from Lead Poisoning?

    Centers for Disease Control (CDC) Podcasts

    In this podcast, Dr. Mary Jean Brown, chief of CDC's Lead Poisoning and Prevention Program, discusses the importance of testing children for lead poisoning, who should be tested, and what parents can do to prevent lead poisoning.

  16. Heavy flavour production in proton-lead and lead-lead collisions with LHCb

    Science.gov (United States)

    Winn, Michael

    2017-11-01

    The LHCb experiment offers the unique opportunity to study heavy-ion interactions in the forward region (2 kinematic domain complementary to the other 3 large experiments at the LHC. The detector has excellent capabilities for reconstructing quarkonia and open charm states, including baryons, down to zero pT. It can separate the prompt and displaced charm components. In pPb collisions, both forward and backward rapidities are covered thanks to the possibility of beam reversal. Results include measurements of the nuclear modification factor and forward-backward ratio for charmonium, open charm and bottomonium states. These quantities are sensitive probes for nuclear effects in heavy flavour production. Perspectives are given with the large accumulated luminosity during the 2016 pPb run at the LHC. In 2015, LHCb participated successfully for the first time in the PbPb data-taking. The status of the forward prompt J/ψ nuclear modification factor measurement in lead-lead collisions is discussed.

  17. The identification of lead ammunition as a source of lead exposure in First Nations: The use of lead isotope ratios

    International Nuclear Information System (INIS)

    Tsuji, Leonard J.S.; Wainman, Bruce C.; Martin, Ian D.; Sutherland, Celine; Weber, Jean-Philippe; Dumas, Pierre; Nieboer, Evert

    2008-01-01

    The use of lead shotshell to hunt water birds has been associated with lead-contamination in game meat. However, evidence illustrating that lead shotshell is a source of lead exposure in subsistence hunting groups cannot be deemed definitive. This study seeks to determine whether lead shotshell constitutes a source of lead exposure using lead isotope ratios. We examined stable lead isotope ratios for lichens, lead shotshell and bullets, and blood from residents of Fort Albany and Kashechewan First Nations, and the City of Hamilton, Ontario, Canada. Data were analyzed using ANOVA and regression analyses. ANOVA of isotope ratios for blood revealed significant differences with respect to location, but not sex. Hamilton differed from both Kashechewan and Fort Albany; however, the First Nations did not differ from each other. ANOVA of the isotope ratios for lead ammunition and lichens revealed no significant differences between lichen groups (north and south) and for the lead ammunition sources (pellets and bullets). A plot of 206 Pb/ 204 Pb and 206 Pb/ 207 Pb values illustrated that lichens and lead ammunition were distinct groupings and only the 95% confidence ellipse of the First Nations group overlapped that of lead ammunition. In addition, partial correlations between blood-lead levels (adjusted for age) and isotope ratios revealed significant (p 206 Pb/ 204 Pb and 206 Pb/ 207 Pb, and a significant negative correlation for 208 Pb/ 206 Pb, as predicted if leaded ammunition were the source of lead exposure. In conclusion, lead ammunition was identified as a source of lead exposure for First Nations people; however, the isotope ratios for lead shotshell pellets and bullets were indistinguishable. Thus, lead-contaminated meat from game harvested with lead bullets may also be contributing to the lead body burden

  18. Parameters in pure type systems

    NARCIS (Netherlands)

    Bloo, C.J.; Kamareddine, F.; Laan, T.D.L.; Nederpelt, R.P.; Rajsbaum, S.

    2002-01-01

    In this paper we study the addition of parameters to typed ¿-calculus with definitions. We show that the resulting systems have nice properties and illustrate that parameters allow for a better fine-tuning of the strength of type systems as well as staying closer to type systems used in practice in

  19. ACTIVATION PARAMETERS AND EXCESS THERMODYANAMIC ...

    African Journals Online (AJOL)

    Applying these data, viscosity-B-coefficients, activation parameters (Δμ10≠) and (Δμ20≠) and excess thermodynamic functions, viz., excess molar volume (VE), excess viscosity, ηE and excess molar free energy of activation of flow, (GE) were calculated. The value of interaction parameter, d, of Grunberg and Nissan ...

  20. HF Parameters of Induction Motor

    Directory of Open Access Journals (Sweden)

    M. N. Benallal

    2017-09-01

    Full Text Available This article describes the results of experimental studies of HF input and primary parameters. A simulation model in Matlab SimulinkTM of multiphase windings as ladder circuit of coils is developed. A method for determining the primary parameters of ladder equivalent circuits is presented.

  1. A case of delayed cardiac perforation of active ventricular lead

    Directory of Open Access Journals (Sweden)

    Hangyuan Guo

    2011-12-01

    Full Text Available A 65-year-old man was admitted as for one month of repetitive dizziness and one episode of syncope. Electrocardiogram showed sinus bradycardia and his Holter monitoring also showed sinus bradycardia with sinus arrest, sino-atrial block and a longest pause of 4.3 s. Then sick sinus syndrome and Adam-Stokes syndrome were diagnosed. Then a dual chamber pacemaker (Medtronic SDR303 was implanted and the parameters were normal by detection. The patient was discharged 1 week later with suture removed. Then 1.5 month late the patient was presented to hospital once again for sudden onset of chest pain with exacerbation after taking deep breath. Pacemaker programming showed both pacing and sensing abnormality with threshold of?5.0V and resistance of 1200?. Lead perforation was revealed by chest X-ray and confirmed by echocardiogram. Considering the fact that there was high risk to remove ventricular lead, spiral tip of previous ventricular lead was withdrew followed by implantation of a new ventricular active lead to the septum. Previous ventricular lead was maintained. As we know that the complications of lead perforation in the clinic was rare. Here we discuss the clinical management and the possible reasons for cardiac perforation of active ventricular lead.

  2. Optimal Parameter Selection of Power System Stabilizer using Genetic Algorithm

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Hyeng Hwan; Chung, Dong Il; Chung, Mun Kyu [Dong-AUniversity (Korea); Wang, Yong Peel [Canterbury Univeristy (New Zealand)

    1999-06-01

    In this paper, it is suggested that the selection method of optimal parameter of power system stabilizer (PSS) with robustness in low frequency oscillation for power system using real variable elitism genetic algorithm (RVEGA). The optimal parameters were selected in the case of power system stabilizer with one lead compensator, and two lead compensator. Also, the frequency responses characteristics of PSS, the system eigenvalues criterion and the dynamic characteristics were considered in the normal load and the heavy load, which proved usefulness of RVEGA compare with Yu's compensator design theory. (author). 20 refs., 15 figs., 8 tabs.

  3. Thermal property of holmium doped lithium lead borate glasses

    Science.gov (United States)

    Usharani, V. L.; Eraiah, B.

    2018-04-01

    The new glass system of holmium doped lithium lead borate glasses were prepared by conventional melt quenching technique. The thermal stability of the different compositions of Ho3+ ions doped lithium lead borate glasses were studied by using TG-DTA. The Tg values are ranging from 439 to 444 °C with respect to the holmium concentration. Physical parameters like polaron radius(rp), inter-nuclear distance (ri), field strength (F) and polarizability (αm) of oxide ions were calculated using appropriate formulae.

  4. GUP parameter from quantum corrections to the Newtonian potential

    Energy Technology Data Exchange (ETDEWEB)

    Scardigli, Fabio, E-mail: fabio@phys.ntu.edu.tw [Dipartimento di Matematica, Politecnico di Milano, Piazza L. da Vinci 32, 20133 Milano (Italy); Department of Applied Mathematics, University of Waterloo, Ontario N2L 3G1 (Canada); Yukawa Institute for Theoretical Physics, Kyoto University, Kyoto 606-8502 (Japan); Lambiase, Gaetano, E-mail: lambiase@sa.infn.it [Dipartimento di Fisica “E.R. Caianiello”, Universita' di Salerno, I-84084 Fisciano (Italy); INFN – Gruppo Collegato di Salerno (Italy); Vagenas, Elias C., E-mail: elias.vagenas@ku.edu.kw [Theoretical Physics Group, Department of Physics, Kuwait University, P.O. Box 5969, Safat 13060 (Kuwait)

    2017-04-10

    We propose a technique to compute the deformation parameter of the generalized uncertainty principle by using the leading quantum corrections to the Newtonian potential. We just assume General Relativity as theory of Gravitation, and the thermal nature of the GUP corrections to the Hawking spectrum. With these minimal assumptions our calculation gives, to first order, a specific numerical result. The physical meaning of this value is discussed, and compared with the previously obtained bounds on the generalized uncertainty principle deformation parameter.

  5. Generating three-parameter sensor

    Directory of Open Access Journals (Sweden)

    Filinyuk M. A.

    2014-08-01

    Full Text Available Generating sensors provide the possibility of getting remote information and its easy conversion into digital form. Typically, these are one-parameter sensors formed by combination of a primary transmitter (PT and a sine wave generator. Two-parameter sensors are not widely used as their implementation causes a problem with ambiguity output when measuring the PT. Nevertheless, the problem of creating miniature, thrifty multi-parameter RF sensors for different branches of science and industry remains relevant. Considering ways of designing RF sensors, we study the possibility of constructing a three-parameter microwave radio frequency range sensor, which is based on a two-stage three-parameter generalized immitance convertor (GIC. Resistive, inductive and capacitive PT are used as sensing elements. A mathematical model of the sensor, which describes the relation of the sensor parameters to the parameters of GIC and PT was developed. The basic parameters of the sensor, its transfer function and sensitivity were studied. It is shown that the maximum value of the power generated signal will be observed at a frequency of 175 MHz, and the frequency ranges depending on the parameters of the PT will be different. Research results and adequacy of the mathematical model were verified by the experiment. Error of the calculated dependences of the lasing frequency on PT parameters change, compared with the experimental data does not exceed 2 %. The relative sensitivity of the sensor based on two-stage GIC showed that for the resistive channel it is about 1.88, for the capacitive channel –1,54 and for the inductive channel –11,5. Thus, it becomes possible to increase the sensor sensitivity compared with the sensitivity of the PT almost 1,2—2 times, and by using the two stage GIC a multifunctional sensor is provided.

  6. Comparative study of lead borate and bismuth lead borate glass systems as gamma-radiation shielding materials

    International Nuclear Information System (INIS)

    Singh, Narveer; Singh, Kanwar Jit; Singh, Kulwant; Singh, Harvinder

    2004-01-01

    Gamma-ray mass attenuation coefficients have been measured experimentally and calculated theoretically for PbO-B 2 O 3 and Bi 2 O 3 -PbO-B 2 O 3 glass systems using narrow beam transmission method. These values have been used to calculate half value layer (HVL) parameter. These parameters have also been calculated theoretically for some standard radiation shielding concretes at same energies. Effect of replacing lead by bismuth has been analyzed in terms of density, molar volume and mass attenuation coefficient

  7. Shorts due to diagnostic leads

    International Nuclear Information System (INIS)

    Ellis, J.F.; Lubell, M.S.; Pillsbury, R.D.; Shen, S.S.; Thome, R.J.; Walstrom, P.L.

    1985-01-01

    The superconducting toroidal field coils that are being tested in the Large Coil Test Facility (LCTF) are heavily instrumented. General Electric coil, a lead wire of an internal sensor became shorted across an estimated three or four turns of the pancake winding. This short occurred during the final stages of the winding fabrication and was not accessible for repair. Resistance, voltage gradient, and transient voltage decay measurements were performed to characterize the short and the magnetic damping of the large steel bobbin and outer structural ring. The 32-gage wire causing the short was estimated to be about 10 cm long, with a resistance of 55 mΩ. As a safety measure, we decided to burn out the shorted wire at room temperature before installing the coil in LCTF. Tests were made to determine the energy needed to vaporize a small wire. Computer calculations indicated that within the voltage limits set for the coil, it was not feasible to burn out the wire by rapidly dumping the coil from a low-current dc charge-up. We accomplished the burnout by applying 800 V at 3.25 A, and 60 Hz for about 1 s. Transient voltage decay measurements made after the burnout and compared with those made before the attempt confirmed that the short had indeed been opened

  8. Leading local politicians visit CERN

    CERN Multimedia

    2001-01-01

    Left to right:  Professor Maiani, Ernest Nycollin, Anne-Marie Comparini, and Jean Pépin surrounded by young PRAC. On the 13th of November leading local politicians : Mme Anne-Marie Comparini, Présidente du Conseil régional de Rhône-Alpes, M. Ernest Nycollin, Président du Conseil général de la Haute-Savoie et M. Jean Pépin, Président du Conseil général de l'Ain took part in a ceremony which featured the insertion of one of the first LHC magnets into its cryostat.  The department of l'Ain financed a large part of the contruction of building SMA 18 which will see intense activity during the assembly of LHC magnets over the next four years. The department of Haute-Savoie helped in the development of the ultrasonic welding machine for the superconducting cables and the conception of integrated circuits that will be used to measure temperature and pressure inside the magnets. T...

  9. Lead effects on postural balance of children

    Energy Technology Data Exchange (ETDEWEB)

    Bhattacharya, A.; Shukla, R.; Bornschein, R.L.; Dietrich, K.N. (Univ. of Cincinnati, OH (USA)); Keith, R. (Univ. of Cincinnati Medical Center, OH (USA))

    1990-11-01

    The postural sway responses of 63 children with a mean age of 5.74 years were quantified with a Force Platform technique. The average maximum (max) blood lead (PbB) of these children during the first 5 years of life was 20.7 {mu}g/dL (range 9.2 to 32.5). The backward stepwise regression analysis for sway area response during the eyes-closed, no-foam test with all the covariates and confounders and the PbB parameters showed a significant relationship with peak or max PbB during the second year of life. These results are consistent with their previous study with a smaller group of children. The data have been analyzed to provide some insight into the role of various afferents for the maintenance of postural balance. The results suggests a hypothesis that if the max PbB had caused some level of impairment in the functional capacities or interconnectivity of the vestibular and/or proprioception systems at 2 years of age, then it is reasonable to assume that the redundancy in the postural afferent systems would naturally adapt to rely more on the remaining intact afferent system (in this case, vision).

  10. The effect of the hemochromatosis (HFE genotype on lead load and iron metabolism among lead smelter workers.

    Directory of Open Access Journals (Sweden)

    Guangqin Fan

    Full Text Available Both an excess of toxic lead (Pb and an essential iron disorder have been implicated in many diseases and public health problems. Iron metabolism genes, such as the hemochromatosis (HFE gene, have been reported to be modifiers for lead absorption and storage. However, the HFE gene studies among the Asian population with occupationally high lead exposure are lacking.To explore the modifying effects of the HFE genotype (wild-type, H63D variant and C282Y variant on the Pb load and iron metabolism among Asian Pb-workers with high occupational exposure.Seven hundred and seventy-one employees from a lead smelter manufacturing company were tested to determine their Pb intoxication parameters, iron metabolic indexes and identify the HFE genotype. Descriptive and multivariate analyses were conducted.Forty-five H63D variant carriers and no C282Y variant carrier were found among the 771 subjects. Compared with subjects with the wild-type genotype, H63D variant carriers had higher blood lead levels, even after controlling for factors such as age, sex, marriage, education, smoking and lead exposure levels. Multivariate analyses also showed that the H63D genotype modifies the associations between the blood lead levels and the body iron burden/transferrin.No C282Y variant was found in this Asian population. The H63D genotype modified the association between the lead and iron metabolism such that increased blood lead is associated with a higher body iron content or a lower transferrin in the H63D variant. It is indicated that H63D variant carriers may be a potentially highly vulnerable sub-population if they are exposed to high lead levels occupationally.

  11. The effect of the hemochromatosis (HFE) genotype on lead load and iron metabolism among lead smelter workers.

    Science.gov (United States)

    Fan, Guangqin; Du, Guihua; Li, Huijun; Lin, Fen; Sun, Ziyong; Yang, Wei; Feng, Chang; Zhu, Gaochun; Li, Yanshu; Chen, Ying; Jiao, Huan; Zhou, Fankun

    2014-01-01

    Both an excess of toxic lead (Pb) and an essential iron disorder have been implicated in many diseases and public health problems. Iron metabolism genes, such as the hemochromatosis (HFE) gene, have been reported to be modifiers for lead absorption and storage. However, the HFE gene studies among the Asian population with occupationally high lead exposure are lacking. To explore the modifying effects of the HFE genotype (wild-type, H63D variant and C282Y variant) on the Pb load and iron metabolism among Asian Pb-workers with high occupational exposure. Seven hundred and seventy-one employees from a lead smelter manufacturing company were tested to determine their Pb intoxication parameters, iron metabolic indexes and identify the HFE genotype. Descriptive and multivariate analyses were conducted. Forty-five H63D variant carriers and no C282Y variant carrier were found among the 771 subjects. Compared with subjects with the wild-type genotype, H63D variant carriers had higher blood lead levels, even after controlling for factors such as age, sex, marriage, education, smoking and lead exposure levels. Multivariate analyses also showed that the H63D genotype modifies the associations between the blood lead levels and the body iron burden/transferrin. No C282Y variant was found in this Asian population. The H63D genotype modified the association between the lead and iron metabolism such that increased blood lead is associated with a higher body iron content or a lower transferrin in the H63D variant. It is indicated that H63D variant carriers may be a potentially highly vulnerable sub-population if they are exposed to high lead levels occupationally.

  12. Comparison of Parameter Identification Techniques

    Directory of Open Access Journals (Sweden)

    Eder Rafael

    2016-01-01

    Full Text Available Model-based control of mechatronic systems requires excellent knowledge about the physical behavior of each component. For several types of components of a system, e.g. mechanical or electrical ones, the dynamic behavior can be described by means of a mathematic model consisting of a set of differential equations, difference equations and/or algebraic constraint equations. The knowledge of a realistic mathematic model and its parameter values is essential to represent the behaviour of a mechatronic system. Frequently it is hard or impossible to obtain all required values of the model parameters from the producer, so an appropriate parameter estimation technique is required to compute missing parameters. A manifold of parameter identification techniques can be found in the literature, but their suitability depends on the mathematic model. Previous work dealt with the automatic assembly of mathematical models of serial and parallel robots with drives and controllers within the dynamic multibody simulation code HOTINT as fully-fledged mechatronic simulation. Several parameters of such robot models were identified successfully by our embedded algorithm. The present work proposes an improved version of the identification algorithm with higher performance. The quality of the identified parameter values and the computation effort are compared with another standard technique.

  13. Kinetic parameters for source driven systems

    International Nuclear Information System (INIS)

    Dulla, S.; Ravetto, P.; Carta, M.; D'Angelo, A.

    2006-01-01

    The definition of the characteristic kinetic parameters of a subcritical source-driven system constitutes an interesting problem in reactor physics with important consequences for practical applications. Consistent and physically meaningful values of the parameters allow to obtain accurate results from kinetic simulation tools and to correctly interpret kinetic experiments. For subcritical systems a preliminary problem arises for the adoption of a suitable weighting function to be used in the projection procedure to derive a point model. The present work illustrates a consistent factorization-projection procedure which leads to the definition of the kinetic parameters in a straightforward manner. The reactivity term is introduced coherently with the generalized perturbation theory applied to the source multiplication factor ks, which is thus given a physical role in the kinetic model. The effective prompt lifetime is introduced on the assumption that a neutron generation can be initiated by both the fission process and the source emission. Results are presented for simplified configurations to fully comprehend the physical features and for a more complicated highly decoupled system treated in transport theory. (authors)

  14. Parameter Estimation of Spacecraft Fuel Slosh Model

    Science.gov (United States)

    Gangadharan, Sathya; Sudermann, James; Marlowe, Andrea; Njengam Charles

    2004-01-01

    Fuel slosh in the upper stages of a spinning spacecraft during launch has been a long standing concern for the success of a space mission. Energy loss through the movement of the liquid fuel in the fuel tank affects the gyroscopic stability of the spacecraft and leads to nutation (wobble) which can cause devastating control issues. The rate at which nutation develops (defined by Nutation Time Constant (NTC can be tedious to calculate and largely inaccurate if done during the early stages of spacecraft design. Pure analytical means of predicting the influence of onboard liquids have generally failed. A strong need exists to identify and model the conditions of resonance between nutation motion and liquid modes and to understand the general characteristics of the liquid motion that causes the problem in spinning spacecraft. A 3-D computerized model of the fuel slosh that accounts for any resonant modes found in the experimental testing will allow for increased accuracy in the overall modeling process. Development of a more accurate model of the fuel slosh currently lies in a more generalized 3-D computerized model incorporating masses, springs and dampers. Parameters describing the model include the inertia tensor of the fuel, spring constants, and damper coefficients. Refinement and understanding the effects of these parameters allow for a more accurate simulation of fuel slosh. The current research will focus on developing models of different complexity and estimating the model parameters that will ultimately provide a more realistic prediction of Nutation Time Constant obtained through simulation.

  15. Phenomenological analysis of the Δ resonance parameters

    International Nuclear Information System (INIS)

    Vasan, S.S.

    1976-01-01

    The positions of the poles in the complex energy plane corresponding to the resonances Δ ++ and Δ 0 , and the associated residues, are determined by fitting the π + p and π - p hadronic phase shift data from the CARTER 73 analysis. As an illustration of the use of the Δ pole parameters, their application to the problem of parametrizing the residue function associated with the Δ Regge trajectory is considered. The input for the parametrization is given partly by the pole position and the residue of the Δ(1950), the first recurrence of the Δ(1236). These pole parameters are deduced from fits to the F 37 partial wave data from the AYED 74 phase shift analysis. Together with the Δ(1236) pole parameters, these provide information on the behavior of the Regge residue in the resonance region u less than 0 (in the context of s-channel backward scattering being dominated by u-channel Regge exchanges). Attempts to incorporate this information in parametrizations of the residue by means of real and complex functions lead to the conclusion that both the residue and the trajectory are better represented in the resonance region by complex parametrizations

  16. An Insoluble Titanium-Lead Anode for Sulfate Electrolytes

    Energy Technology Data Exchange (ETDEWEB)

    Ferdman, Alla

    2005-05-11

    The project is devoted to the development of novel insoluble anodes for copper electrowinning and electrolytic manganese dioxide (EMD) production. The anodes are made of titanium-lead composite material produced by techniques of powder metallurgy, compaction of titanium powder, sintering and subsequent lead infiltration. The titanium-lead anode combines beneficial electrochemical behavior of a lead anode with high mechanical properties and corrosion resistance of a titanium anode. In the titanium-lead anode, the titanium stabilizes the lead, preventing it from spalling, and the lead sheathes the titanium, protecting it from passivation. Interconnections between manufacturing process, structure, composition and properties of the titanium-lead composite material were investigated. The material containing 20-30 vol.% of lead had optimal combination of mechanical and electrochemical properties. Optimal process parameters to manufacture the anodes were identified. Prototypes having optimized composition and structure were produced for testing in operating conditions of copper electrowinning and EMD production. Bench-scale, mini-pilot scale and pilot scale tests were performed. The test anodes were of both a plate design and a flow-through cylindrical design. The cylindrical anodes were composed of cylinders containing titanium inner rods and fitting over titanium-lead bushings. The cylindrical design allows the electrolyte to flow through the anode, which enhances diffusion of the electrolyte reactants. The cylindrical anodes demonstrate higher mass transport capabilities and increased electrical efficiency compared to the plate anodes. Copper electrowinning represents the primary target market for the titanium-lead anode. A full-size cylindrical anode performance in copper electrowinning conditions was monitored over a year. The test anode to cathode voltage was stable in the 1.8 to 2.0 volt range. Copper cathode morphology was very smooth and uniform. There was no

  17. Leading Twist GPDs and Transverse Spin Densities in a Proton

    Science.gov (United States)

    Mondal, Chandan; Maji, Tanmay; Chakrabarti, Dipankar; Zhao, Xingbo

    2018-05-01

    We present a study of both chirally even and odd generalized parton distributions in the leading twist for the quarks in a proton using the light-front wavefunctions of a quark-diquark model predicted by the holographic QCD. For transversely polarized proton, both chiral even and chiral odd GPDs contribute to the spin densities which are related to the GPDs in transverse impact parameter space. Here, we also present a study of the spin densities for transversely polarized quark and proton.

  18. Telemetry System of Biological Parameters

    Directory of Open Access Journals (Sweden)

    Jan Spisak

    2005-01-01

    Full Text Available The mobile telemetry system of biological parameters serves for reading and wireless data transfer of measured values of selected biological parameters to an outlying computer. It concerns basically long time monitoring of vital function of car pilot.The goal of this projects is to propose mobile telemetry system for reading, wireless transfer and processing of biological parameters of car pilot during physical and psychical stress. It has to be made with respect to minimal consumption, weight and maximal device mobility. This system has to eliminate signal noise, which is created by biological artifacts and disturbances during the data transfer.

  19. Results from the Cooler and Lead Tests

    International Nuclear Information System (INIS)

    Green, Michael A.

    2010-01-01

    The report presents the results of testing MICE spectrometer magnet current leads on a test apparatus that combines both the copper leads and the high temperature superconducting (HTS) leads with a single Cryomech PT415 cooler and liquid helium tank. The current is carried through the copper leads from 300 K to the top of the HTS leads. The current is then carried through the HTS leads to a feed-through from the vacuum space to the inside of a liquid helium tank. The experiment allows one to measure the performance of both cooler stages along with the performance of the leads. While the leads were powered we measured the voltage drops through the copper leads, through the HTS leads, through spliced to the feed-through, through the feed-through and through the low-temperature superconducting loop that connects one lead to the other. Measurements were made using the leads that were used in spectrometer magnet 1A and spectrometer magnet 2A. These are the same leads that were used for Superbend and Venus magnets at LBNL. The IL/A for these leads was 5.2 x 10 6 m -1 . The leads turned out to be too long. The same measurements were made using the leads that were installed in magnet 2B. The magnet 2B leads had an IL/A of 3.3 x 10 6 A m -1 . This report discusses the cooler performance and the measured electrical performance of the lead circuit that contains the copper leads and the superconducting leads. All of the HTS leads that were installed in magnet 2B were current tested using this apparatus.

  20. Dietary exposure to lead in the Netherlands

    NARCIS (Netherlands)

    Boon PE; te Biesebeek JD; van Donkersgoed G; VVH; V&Z

    2017-01-01

    Uptake from the soil is the main route by which lead ends up in food. Lead in soil has its origin in both natural and anthropogenic sources. The lead concentration in food has decreased over the last decennia by the use of unleaded petrol and paint, and the replacement of lead water pipes.