Development of FPGA-based digital signal processing system for radiation spectroscopy

International Nuclear Information System (INIS)

Lee, Pil Soo; Lee, Chun Sik; Lee, Ju Hahn

2013-01-01

We have developed an FPGA-based digital signal processing system that performs both online digital signal filtering and pulse-shape analysis for both particle and gamma-ray spectroscopy. Such functionalities were made possible by a state-of-the-art programmable logic device and system architectures employed. The system performance as measured, for example, in the system dead time and accuracy for pulse-height and rise-time determination, was evaluated with standard alpha- and gamma-ray sources using a CsI(Tl) scintillation detector. It is resulted that the present system has shown its potential application to various radiation-related fields such as particle identification, radiography, and radiation imaging. - Highlights: ► An FPGA-based digital processing system was developed for radiation spectroscopy. ► Our digital system has a 14-bit resolution and a 100-MHz sampling rate. ► The FPGA implements the online digital filtering and pulse-shape analysis. ► The pileup rejection is implemented in trigger logic before digital filtering process. ► Our digital system was verified in alpha-gamma measurements using a CsI detector

FPGA hardware acceleration for high performance neutron transport computation based on agent methodology - 318

International Nuclear Information System (INIS)

Shanjie, Xiao; Tatjana, Jevremovic

2010-01-01

The accurate, detailed and 3D neutron transport analysis for Gen-IV reactors is still time-consuming regardless of advanced computational hardware available in developed countries. This paper introduces a new concept in addressing the computational time while persevering the detailed and accurate modeling; a specifically designed FPGA co-processor accelerates robust AGENT methodology for complex reactor geometries. For the first time this approach is applied to accelerate the neutronics analysis. The AGENT methodology solves neutron transport equation using the method of characteristics. The AGENT methodology performance was carefully analyzed before the hardware design based on the FPGA co-processor was adopted. The most time-consuming kernel part is then transplanted into the FPGA co-processor. The FPGA co-processor is designed with data flow-driven non von-Neumann architecture and has much higher efficiency than the conventional computer architecture. Details of the FPGA co-processor design are introduced and the design is benchmarked using two different examples. The advanced chip architecture helps the FPGA co-processor obtaining more than 20 times speed up with its working frequency much lower than the CPU frequency. (authors)

FPGA based Control of a Production Cell System

NARCIS (Netherlands)

Groothuis, M.A.; van Zuijlen, Jasper J.P.; Broenink, Johannes F.

Most motion control systems for mechatronic systems are implemented on digital computers. In this paper we present an FPGA based solution implemented on a low cost Xilinx Spartan III FPGA. A Production Cell setup with multiple parallel operating units is chosen as a test case. The embedded control

Hazard Analysis of Software Requirements Specification for Process Module of FPGA-based Controllers in NPP

Energy Technology Data Exchange (ETDEWEB)

Jung; Sejin; Kim, Eui-Sub; Yoo, Junbeom [Konkuk University, Seoul (Korea, Republic of); Keum, Jong Yong; Lee, Jang-Soo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

Software in PLC, FPGA which are used to develop I and C system also should be analyzed to hazards and risks before used. NUREG/CR-6430 proposes the method for performing software hazard analysis. It suggests analysis technique for software affected hazards and it reveals that software hazard analysis should be performed with the aspects of software life cycle such as requirements analysis, design, detailed design, implements. It also provides the guide phrases for applying software hazard analysis. HAZOP (Hazard and operability analysis) is one of the analysis technique which is introduced in NUREG/CR-6430 and it is useful technique to use guide phrases. HAZOP is sometimes used to analyze the safety of software. Analysis method of NUREG/CR-6430 had been used in Korea nuclear power plant software for PLC development. Appropriate guide phrases and analysis process are selected to apply efficiently and NUREG/CR-6430 provides applicable methods for software hazard analysis is identified in these researches. We perform software hazard analysis of FPGA software requirements specification with two approaches which are NUREG/CR-6430 and HAZOP with using general GW. We also perform the comparative analysis with them. NUREG/CR-6430 approach has several pros and cons comparing with the HAZOP with general guide words and approach. It is enough applicable to analyze the software requirements specification of FPGA.

Verification of FPGA-based NPP I and C systems. General approach and techniques

International Nuclear Information System (INIS)

Andrashov, Anton; Kharchenko, Vyacheslav; Sklyar, Volodymir; Reva, Lubov; Siora, Alexander

2011-01-01

This paper presents a general approach and techniques for design and verification of Field Programmable Gates Arrays (FPGA)-based Instrumentation and Control (I and C) systems for Nuclear Power Plants (NPP). Appropriate regulatory documents used for I and C systems design, development, verification and validation (V and V) are discussed considering the latest international standards and guidelines. Typical development and V and V processes of FPGA electronic design for FPGA-based NPP I and C systems are presented. Some safety-related features of implementation process are discussed. Corresponding development artifacts, related to design and implementation activities are outlined. An approach to test-based verification of FPGA electronic design algorithms, used in FPGA-based reactor trip systems is proposed. The results of application of test-based techniques for assessment of FPGA electronic design algorithms for reactor trip system (RTS) produced by Research and Production Corporation (RPC) 'Radiy' are presented. Some principles of invariant-oriented verification for FPGA-based safety-critical systems are outlined. (author)

Safety critical FPGA-based NPP instrumentation and control systems: assessment, development and implementation

Energy Technology Data Exchange (ETDEWEB)

Bakhmach, E. S.; Siora, A. A.; Tokarev, V. I. [Research and Production Corporation Radiy, 29 Geroev Stalingrada Str., Kirovograd 25006 (Ukraine); Kharchenko, V. S.; Sklyar, V. V.; Andrashov, A. A., E-mail: marketing@radiy.co [Center for Safety Infrastructure-Oriented Research and Analysis, 37 Astronomicheskaya Str., Kharkiv 61085 (Ukraine)

2010-10-15

The stages of development, production, verification, licensing and implementation methods and technologies of safety critical instrumentation and control systems for nuclear power plants (NPP) based on FPGA (Field Programmable Gates Arrays) technologies are described. A life cycle model and multi-version technologies of dependability and safety assurance of FPGA-based instrumentation and control systems are discussed. An analysis of NPP instrumentation and control systems construction principles developed by Research and Production Corporation Radiy using FPGA-technologies and results of these systems implementation and operation at Ukrainian and Bulgarian NPP are presented. The RADIY{sup TM} platform has been designed and developed by Research and Production Corporation Radiy, Ukraine. The main peculiarity of the RADIY{sup TM} platform is the use of FPGA as programmable components for logic control operation. The FPGA-based RADIY{sup TM} platform used for NPP instrumentation and control systems development ensures sca lability of system functions types, volume and peculiarities (by changing quantity and quality of sensors, actuators, input/output signals and control algorithms); sca lability of dependability (safety integrity) (by changing a number of redundant channel, tiers, diagnostic and reconfiguration procedures); sca lability of diversity (by changing types, depth and method of diversity selection). (Author)

Commercial FPGA based multipurpose controller: implementation perspective

International Nuclear Information System (INIS)

Arredondo, I.; Campo, M. del; Echevarria, P.; Belver, D.; Muguira, L.; Garmendia, N.; Hassanzadegan, H.; Eguiraun, M.; Jugo, J.; Etxebarria, V.

2012-01-01

This work presents a fast acquisition multipurpose controller, focussing on its EPICS integration and on its XML based configuration. This controller is based on a Lyrtech VHS-ADC board which encloses an FPGA, connected to a Host PC. This Host acts as local controller and implements an IOC integrating the device in an EPICS network. These tasks have been performed using Java as the main tool to program the PC to make the device fit the desired application. All the process includes the use of different technologies: JNA to handle C functions i.e. FPGA API, JavaIOC to integrate EPICS and XML w3c DOM classes to easily configure the particular application. In order to manage the functions, Java specific tools have been developed: Methods to manage the FPGA (read/write registers, acquire data,...), methods to create and use the EPICS server (put, get, monitor,...), mathematical methods to process the data (numeric format conversions,...) and methods to create/ initialize the application structure by means of an XML file (parse elements, build the DOM and the specific application structure). This XML file has some common nodes and tags for all the applications: FPGA registers specifications definition and EPICS variables. This means that the user only has to include a node for the specific application and use the mentioned tools. A main class is in charge of managing the FPGA and EPICS server according to this XML file. This multipurpose controller has been successfully used to implement a BPM and an LLRF application for the ESS-Bilbao (European Spallation Source) facility. (authors)

FPGA BASED HARDWARE KEY FOR TEMPORAL ENCRYPTION

Directory of Open Access Journals (Sweden)

B. Lakshmi

2010-09-01

Full Text Available In this paper, a novel encryption scheme with time based key technique on an FPGA is presented. Time based key technique ensures right key to be entered at right time and hence, vulnerability of encryption through brute force attack is eliminated. Presently available encryption systems, suffer from Brute force attack and in such a case, the time taken for breaking a code depends on the system used for cryptanalysis. The proposed scheme provides an effective method in which the time is taken as the second dimension of the key so that the same system can defend against brute force attack more vigorously. In the proposed scheme, the key is rotated continuously and four bits are drawn from the key with their concatenated value representing the delay the system has to wait. This forms the time based key concept. Also the key based function selection from a pool of functions enhances the confusion and diffusion to defend against linear and differential attacks while the time factor inclusion makes the brute force attack nearly impossible. In the proposed scheme, the key scheduler is implemented on FPGA that generates the right key at right time intervals which is then connected to a NIOS – II processor (a virtual microcontroller which is brought out from Altera FPGA that communicates with the keys to the personal computer through JTAG (Joint Test Action Group communication and the computer is used to perform encryption (or decryption. In this case the FPGA serves as hardware key (dongle for data encryption (or decryption.

An FPGA-Based Electronic Cochlea

Directory of Open Access Journals (Sweden)

M. P. Leong

2003-06-01

Full Text Available A module generator which can produce an FPGA-based implementation of an electronic cochlea filter with arbitrary precision is presented. Although hardware implementations of electronic cochlea models have traditionally used analog VLSI as the implementation medium due to their small area, high speed, and low power consumption, FPGA-based implementations offer shorter design times, improved dynamic range, higher accuracy, and a simpler computer interface. The tool presented takes filter coefficients as input and produces a synthesizable VHDL description of an application-optimized design as output. Furthermore, the tool can use simulation test vectors in order to determine the appropriate scaling of the fixed point precision parameters for each filter. The resulting model can be used as an accelerator for research in audition or as the front-end for embedded auditory signal processing systems. The application of this module generator to a real-time cochleagram display is also presented.

Development of an FPGA-based controller for safety critical application

International Nuclear Information System (INIS)

Xing, A.; De Grosbois, J.; Sklyar, V.; Archer, P.; Awwal, A.

2011-01-01

In implementing safety functions, Field Programmable Gate Arrays (FPGA) technology offers a distinct combination of benefits and advantages over microprocessor-based systems. FPGAs can be designed such that the final product is purely hardware, without any overhead runtime software, bringing the design closer to a conventional hardware-based solution. On the other hand, FPGAs can implement more complex safety logic that would generally require microprocessor-based safety systems. There are now qualified FPGA-based platforms available on the market with a credible use history in safety applications in nuclear power plants. Atomic Energy of Canada (AECL), in collaboration with RPC Radiy, has initiated a development program to define a vigorous FPGA engineering process suitable for implementing safety critical functions at the application development level. This paper provides an update on the FPGA development program along with the proposed design model using function block diagrams for the development of safety controllers in CANDU applications. (author)

A FPGA-based signal processing unit for a GEM array detector

International Nuclear Information System (INIS)

Yen, W.W.; Chou, H.P.

2013-06-01

in the present study, a signal processing unit for a GEM one-dimensional array detector is presented to measure the trajectory of photoelectrons produced by cosmic X-rays. The present GEM array detector system has 16 signal channels. The front-end unit provides timing signals from trigger units and energy signals from charge sensitive amplifies. The prototype of the processing unit is implemented using commercial field programmable gate array circuit boards. The FPGA based system is linked to a personal computer for testing and data analysis. Tests using simulated signals indicated that the FPGA-based signal processing unit has a good linearity and is flexible for parameter adjustment for various experimental conditions (authors)

A software radio platform based on ARM and FPGA

Directory of Open Access Journals (Sweden)

Yang Xin.

2016-01-01

Full Text Available The rapid rise in computational performance offered by computer systems has greatly increased the number of practical software radio applications. A scheme presented in this paper is a software radio platform based on ARM and FPGA. FPGA works as the coprocessor together with the ARM, which serves as the core processor. ARM is used for digital signal processing and real-time data transmission, and FPGA is used for synchronous timing control and serial-parallel conversion. A SPI driver for real-time data transmission between ARM and FPGA under ARM-Linux system is provided. By adopting modular design, the software radio platform is capable of implementing wireless communication functions and satisfies the requirements of real-time signal processing platform for high security and broad applicability.

A FPGA-based architecture for real-time image matching

Science.gov (United States)

Wang, Jianhui; Zhong, Sheng; Xu, Wenhui; Zhang, Weijun; Cao, Zhiguo

2013-10-01

Image matching is a fundamental task in computer vision. It is used to establish correspondence between two images taken at different viewpoint or different time from the same scene. However, its large computational complexity has been a challenge to most embedded systems. This paper proposes a single FPGA-based image matching system, which consists of SIFT feature detection, BRIEF descriptor extraction and BRIEF matching. It optimizes the FPGA architecture for the SIFT feature detection to reduce the FPGA resources utilization. Moreover, we implement BRIEF description and matching on FPGA also. The proposed system can implement image matching at 30fps (frame per second) for 1280x720 images. Its processing speed can meet the demand of most real-life computer vision applications.

Long-distance configuration of FPGA based on serial communication

International Nuclear Information System (INIS)

Liu Xiang; Song Kezhu; Zhang Sifeng

2010-01-01

To solve FPGA configuration in some nuclear electronics, which works in radioactivity environment, the article introduces a way of long-distance configuration with PC and CPLD, based on serial communication. Taking CYCLONE series FPGA and EPCS configuration chip from ALTERA for example, and using the AS configuration mode, we described our design from the aspects of basic theory, hardware connection, software function and communication protocol. With this design, we could configure several FPGAs in the distance of 100 meters, or we could configure on FPGA in the distance of 150 meters. (authors)

FPGA based Smart Wireless MIMO Control System

International Nuclear Information System (INIS)

Ali, Syed M Usman; Hussain, Sajid; Siddiqui, Ali Akber; Arshad, Jawad Ali; Darakhshan, Anjum

2013-01-01

In our present work, we have successfully designed, and developed an FPGA based smart wireless MIMO (Multiple Input and Multiple Output) system capable of controlling multiple industrial process parameters such as temperature, pressure, stress and vibration etc. To achieve this task we have used Xilin x Spartan 3E FPGA (Field Programmable Gate Array) instead of conventional microcontrollers. By employing FPGA kit to PC via RF transceivers which has a working range of about 100 meters. The developed smart system is capable of performing the control task assigned to it successfully. We have also provided a provision to our proposed system that can be accessed for monitoring and control through the web and GSM as well. Our proposed system can be equally applied to all the hazardous and rugged industrial environments where a conventional system cannot work effectively

FPGA-based trigger system for the Fermilab SeaQuest experimentz

Energy Technology Data Exchange (ETDEWEB)

Shiu, Shiuan-Hal, E-mail: shshiu@phys.sinica.edu.tw [Institute of Physics, Academia Sinica,128 Sec. 2, Academia Rd., Nankang, Taipei 11529, Taiwan (China); Department of Physics, National Central University, No. 300, Jhongda Rd., Jhongli District, Taoyuan City 32001, Taiwan (China); Wu, Jinyuan [Fermi National Accelerator Laboratory, Kirk and Pine Streets, Batavia, IL 60510-5011 (United States); McClellan, Randall Evan [Department of Physics, University of Illinois at Urbana-Champaign, 1110 W. Green St., Urbana, IL 61801-3080 (United States); Chang, Ting-Hua; Chang, Wen-Chen; Chen, Yen-Chu [Institute of Physics, Academia Sinica,128 Sec. 2, Academia Rd., Nankang, Taipei 11529, Taiwan (China); Gilman, Ron [Rutgers, The State University of New Jersey, 136 Frelinghuysen Rd., Piscataway, NJ 08854 (United States); Nakano, Kenichi [Department of Physics, Tokyo Institute of Technology, 2-12-1 Ookayama, Meguro-ku, Tokyo 152-8550 (Japan); Peng, Jen-Chieh [Department of Physics, University of Illinois at Urbana-Champaign, 1110 W. Green St., Urbana, IL 61801-3080 (United States); Wang, Su-Yin [Institute of Physics, Academia Sinica,128 Sec. 2, Academia Rd., Nankang, Taipei 11529, Taiwan (China); Fermi National Accelerator Laboratory, Kirk and Pine Streets, Batavia, IL 60510-5011 (United States); Department of Physics, National Kaohsiung Normal University, No. 62, Shenjhong Rd.,Yanchao Township, Kaohsiung County 824, Taiwan (China)

2015-12-01

The SeaQuest experiment (Fermilab E906) detects pairs of energetic μ{sup +} and μ{sup −} produced in 120 GeV/c proton–nucleon interactions in a high rate environment. The trigger system consists of several arrays of scintillator hodoscopes and a set of field-programmable gate array (FPGA) based VMEbus modules. Signals from up to 96 channels of hodoscope are digitized by each FPGA with a 1-ns resolution using the time-to-digital convertor (TDC) firmware. The delay of the TDC output can be adjusted channel-by-channel in 1-ns step and then re-aligned with the beam RF clock. The hit pattern on the hodoscope planes is then examined against pre-determined trigger matrices to identify candidate muon tracks. Information on the candidate tracks is sent to the 2nd-level FPGA-based track correlator to find candidate di-muon events. The design and implementation of the FPGA-based trigger system for SeaQuest experiment are presented.

FPGA-Based Efficient Hardware/Software Co-Design for Industrial Systems with Consideration of Output Selection

Science.gov (United States)

Deliparaschos, Kyriakos M.; Michail, Konstantinos; Zolotas, Argyrios C.; Tzafestas, Spyros G.

2016-05-01

This work presents a field programmable gate array (FPGA)-based embedded software platform coupled with a software-based plant, forming a hardware-in-the-loop (HIL) that is used to validate a systematic sensor selection framework. The systematic sensor selection framework combines multi-objective optimization, linear-quadratic-Gaussian (LQG)-type control, and the nonlinear model of a maglev suspension. A robustness analysis of the closed-loop is followed (prior to implementation) supporting the appropriateness of the solution under parametric variation. The analysis also shows that quantization is robust under different controller gains. While the LQG controller is implemented on an FPGA, the physical process is realized in a high-level system modeling environment. FPGA technology enables rapid evaluation of the algorithms and test designs under realistic scenarios avoiding heavy time penalty associated with hardware description language (HDL) simulators. The HIL technique facilitates significant speed-up in the required execution time when compared to its software-based counterpart model.

Analysis of Thermal Stability of Different Counter on 28nm FPGA

DEFF Research Database (Denmark)

Gupta, Daizy; Yadav, Amit; Hussain, Dil muhammed Akbar

2016-01-01

In this paper we are presenting the power analysis for thermal awareness of different counters. The technique we are using to do the analysis is based on 28 nm FPGA tech-nique. In this work during implementation on FPGA, we are going to analyze thermal stability of different counters in temperatu...... range of 10oC, 30oC, 60oC, 90oC, 120oC. There is 90.36% reduction in leakage power of divide by 2 counter when we scale down the temperature from 120oC to 10oC and 49.61% reduction in leakage power of LFSR up counter when we scale down the temperature from 120oC to 10oC....

FPGA based VME boards for Indus-2 timing control system

International Nuclear Information System (INIS)

Lulani, Nitin; Barpande, K.; Fatnani, P.; Sheth, Y.

2009-01-01

FPGA based two VME boards are developed and deployed recently for Indus-2 timing control system at RRCAT Indore. New FPGA based 5-channel programmable (Coarse-Fine) delay generator board has replaced three 2-channel coarse and one 4-channel fine existing delay generator boards. Introduction of this board has improved the fine delay resolution (to 0.5ns) as well as channel to channel jitter (to 0.8ns) of the system. It has also improved the coarse delay resolution from previous 33ns to 8ns with the possibility to work at divided Indus-2 RF clock. These improved parameters have resulted in better injection rate of beam. Old coincidence generator board is also replaced with FPGA based newly developed Coincidence clock generator VME board, which has resulted in successful controlled filling of beam (single, multi and 3-symmetrical bucket filling) in Indus-2. Three more existing boards will be replaced by single FPGA based delay generator card in near future. This paper presents the design, test results and features of new boards. (author)

Innovative Approach to Implementation of FPGA-based NPP Instrumentation and Control Systems

Energy Technology Data Exchange (ETDEWEB)

Andrashov, Anton; Kharchenko, Vyacheslav; Sklyar, Volodymir [Centre for Safety Infrastructure-Oriented Research and Analysis, Kharkov (Ukraine); SIORA Alexander [Research and Production Corporation Radiy, Kirovograd (Ukraine)

2011-08-15

Advantages of application of Field Programmable Gates Arrays (FPGA) technology for implementation of Instrumentation and Control (I and C) systems for Nuclear Power Plants (NPP) are outlined. Specific features of FPGA technology in the context of cyber security threats for NPPs I and C systems are analyzed. Description of FPGA-based platform used for implementation of different safety I and C systems for NPPs is presented. Typical architecture of NPPs safety I and C system based on the platform, as well as approach to implementation of I and C systems using FPGA-based platform are discussed. Data on implementation experience of application of the platform for NPP safety I and C systems modernization projects are finalizing the paper.

Innovative approach to implementation of FPGA-based NPP instrumentation and control systems

International Nuclear Information System (INIS)

Andrashov, Anton; Kharchenko, Vyacheslav; Sklyar, Volodymir; Siora, Alexander

2011-01-01

Advantages of application of Field Programmable Gates Arrays (FPGA) technology for implementation of Instrumentation and Control (I and C) systems for Nuclear Power Plants (NPP) are outlined. Specific features of FPGA technology in the context of cyber security threats for NPPs I and C systems are analyzed. Description of FPGA-based platform used for implementation of different safety I and C systems for NPPs is presented. Typical architecture of NPPs safety I and C system based on the platform, as well as approach to implementation of I and C systems using FPGA-based platform are discussed. Data on implementation experience of application of the platform for NPP safety I and C systems modernization projects are finalizing the paper. (author)

Innovative Approach to Implementation of FPGA-based NPP Instrumentation and Control Systems

International Nuclear Information System (INIS)

Andrashov, Anton; Kharchenko, Vyacheslav; Sklyar, Volodymir; SIORA Alexander

2011-01-01

Advantages of application of Field Programmable Gates Arrays (FPGA) technology for implementation of Instrumentation and Control (I and C) systems for Nuclear Power Plants (NPP) are outlined. Specific features of FPGA technology in the context of cyber security threats for NPPs I and C systems are analyzed. Description of FPGA-based platform used for implementation of different safety I and C systems for NPPs is presented. Typical architecture of NPPs safety I and C system based on the platform, as well as approach to implementation of I and C systems using FPGA-based platform are discussed. Data on implementation experience of application of the platform for NPP safety I and C systems modernization projects are finalizing the paper

Application of the Information Encryption Technology in the Industrial Control Network Based on FPGA

Directory of Open Access Journals (Sweden)

Guo Yao-Hua

2014-07-01

Full Text Available With the rapid development of information technology industry, Information encryption is an effective means of information security. Data encryption system based on FPGA in the field of industry is elaborated in this paper, and the data acquisition module, the basic principle of 3DES algorithm, its implementation in FPGA and PMC bus interface module are introduced. Based on the function simulation, test and analysis of the design results, this scheme has the characteristics of high reliability, fast algorithm and less hardware resources, and it can be widely used in industrial networks.

Energy efficiency analysis and implementation of AES on an FPGA

Science.gov (United States)

Kenney, David

The Advanced Encryption Standard (AES) was developed by Joan Daemen and Vincent Rjimen and endorsed by the National Institute of Standards and Technology in 2001. It was designed to replace the aging Data Encryption Standard (DES) and be useful for a wide range of applications with varying throughput, area, power dissipation and energy consumption requirements. Field Programmable Gate Arrays (FPGAs) are flexible and reconfigurable integrated circuits that are useful for many different applications including the implementation of AES. Though they are highly flexible, FPGAs are often less efficient than Application Specific Integrated Circuits (ASICs); they tend to operate slower, take up more space and dissipate more power. There have been many FPGA AES implementations that focus on obtaining high throughput or low area usage, but very little research done in the area of low power or energy efficient FPGA based AES; in fact, it is rare for estimates on power dissipation to be made at all. This thesis presents a methodology to evaluate the energy efficiency of FPGA based AES designs and proposes a novel FPGA AES implementation which is highly flexible and energy efficient. The proposed methodology is implemented as part of a novel scripting tool, the AES Energy Analyzer, which is able to fully characterize the power dissipation and energy efficiency of FPGA based AES designs. Additionally, this thesis introduces a new FPGA power reduction technique called Opportunistic Combinational Operand Gating (OCOG) which is used in the proposed energy efficient implementation. The AES Energy Analyzer was able to estimate the power dissipation and energy efficiency of the proposed AES design during its most commonly performed operations. It was found that the proposed implementation consumes less energy per operation than any previous FPGA based AES implementations that included power estimations. Finally, the use of Opportunistic Combinational Operand Gating on an AES cipher

Embedded system in FPGA-based LLRF controller for FLASH

Science.gov (United States)

Szewinski, Jaroslaw; Pucyk, Piotr; Jalmuzna, Wojciech; Fafara, Przemyslaw; Pieciukiewicz, Marcin; Romaniuk, Ryszard; Pozniak, Krzysztof T.

2006-10-01

FPGA devices are often used in High Energy Physics and accelerator technology experiments, where the highest technologies are needed. To make FPGA based systems more flexible, common technique is to provide SoC (System on a Chip) solution in the FPGA, which is in most cases a CPU unit. Such a combination gives possibility to balance between hardware and software implementation of particular task. SoC solution on FPGA can be very flexible, because in simplest cases no additional hardware is needed to run programs on CPU, and when system has such devices like UART, SDRAM memory, mass storage and network interface, it can handle full featured operating system such as Linux or VxWorks. Embedded process can be set up in different configurations, depending on the available resources on board, so every user can adjust system to his own needs. Embedded systems can be also used to perform partial self-reconfiguration of FPGA logic of the chip, on which the system is running. This paper will also present some results on SoC implementations in a Low Level RF system under design for the VUV Free Electron Laser, FLASH, DESY, Hamburg.

Spatial and color clustering on an FPGA-based computer system

Science.gov (United States)

Leeser, Miriam E.; Kitaryeva, Natalya V.; Crisman, Jill D.

1998-10-01

We are mapping an image clustering algorithm onto an FPGA- based computer system. Our approach processes raw pixel data in the red, green, blue color space and generates an output image where all pixels are assigned to classes. A class is a group of pixels with similar color and location. These classes are then used as the basis of further processing to generate tags. The tags, in turn, are used to generate queries for searching libraries of digital images. We run our image tagging approach on an FPGA-based computing machine. The image clustering algorithm is run on an FPGA board, and only the classified image is communicated to the host PC. Further processing is run on the host. Our experimental system consists of an Annapolis Wildforce board with four Xilinx XC4000 chips and a PCI connection to a host PC. Our implementation allows the raw image data to stay local to the FPGAs, and only the class image is communicated to the host PC. The classified pixels are then used to generate tags which can be used for searching a digital library. This approach allows us to parallelize the image processing on the FPGA board, and to minimize the data handled by the PC. FPGA platforms are ideally suited for this sort of initial processing of images. The large amount of image data can be preprocessed by exploiting the inherent parallelism available in FPGA architectures, keeping unnecessary data off the host processor. The result of our algorithm is a reduction by up to a factor of six in the number of bits required to represent each pixel. The output data is passed to the host PC, thus reducing the processing and memory resources needed compared to handling the raw data on the PC. The process of generating tags of images is simplified by first classifying pixels on an FPGA-based system, and digital library search is accelerated.

Logic Foundry: Rapid Prototyping for FPGA-Based DSP Systems

Directory of Open Access Journals (Sweden)

Bhattacharyya Shuvra S

2003-01-01

Full Text Available We introduce the Logic Foundry, a system for the rapid creation and integration of FPGA-based digital signal processing systems. Recognizing that some of the greatest challenges in creating FPGA-based systems occur in the integration of the various components, we have proposed a system that targets the following four areas of integration: design flow integration, component integration, platform integration, and software integration. Using the Logic Foundry, a system can be easily specified, and then automatically constructed and integrated with system level software.

The impact of software and CAE tools on SEU in field programmable gate arrays

International Nuclear Information System (INIS)

Katz, R.; Wang, J.; McCollum, J.; Cronquist, B.

1999-01-01

Field programmable gate array (FPGA) devices, heavily used in spacecraft electronics, have grown substantially in size over the past few years, causing designers to work at a higher conceptual level, with computer aided engineering (CAE) tools synthesizing and optimizing the logic from a description. It is shown that the use of commercial-off-the-shelf (COTS) CAE tools can produce unreliable circuit designs when the device is used in a radiation environment and a flip-flop is upset. At a lower level, software can be used to improve the SEU performance of a flip-flop, exploiting the configurable nature of FPGA technology and on-chip delay, parasitic resistive, and capacitive circuit elements

A natural-color mapping for single-band night-time image based on FPGA

Science.gov (United States)

Wang, Yilun; Qian, Yunsheng

2018-01-01

A natural-color mapping for single-band night-time image method based on FPGA can transmit the color of the reference image to single-band night-time image, which is consistent with human visual habits and can help observers identify the target. This paper introduces the processing of the natural-color mapping algorithm based on FPGA. Firstly, the image can be transformed based on histogram equalization, and the intensity features and standard deviation features of reference image are stored in SRAM. Then, the real-time digital images' intensity features and standard deviation features are calculated by FPGA. At last, FPGA completes the color mapping through matching pixels between images using the features in luminance channel.

Design for an IO block array in a tile-based FPGA

International Nuclear Information System (INIS)

Ding Guangxin; Chen Lingdou; Liu Zhongli

2009-01-01

A design for an IO block array in a tile-based FPGA is presented. Corresponding with the characteristics of the FPGA, each IO cell is composed of a signal path, local routing pool and configurable input/output buffers. Shared programmable registers in the signal path can be configured for the function of JTAG, without specific boundary scan registers/latches, saving layout area. The local routing pool increases the flexibility of routing and the routability of the whole FPGA. An auxiliary power supply is adopted to increase the performance of the IO buffers at different configured IO standards. The organization of the IO block array is described in an architecture description file, from which the array layout can be accomplished through use of an automated layout assembly tool. This design strategy facilitates the design of FPGAs with different capacities or architectures in an FPGA family series. The bond-out schemes of the same FPGA chip in different packages are also considered. The layout is based on SMIC 0.13 μm logic 1P8M salicide 1.2/2.5 V CMOS technology. Our performance is comparable with commercial SRAM-based FPGAs which use a similar process. (semiconductor integrated circuits)

Application-specific mesh-based heterogeneous FPGA architectures

CERN Document Server

Parvez, Husain

2011-01-01

This volume presents a new exploration environment for mesh-based, heterogeneous FPGA architectures. Readers will find a description of state-of-the-art techniques for reducing area requirements, which both increase performance and enable power reduction.

Diversity for security: case assessment for FPGA-based safety-critical systems

Directory of Open Access Journals (Sweden)

Kharchenko Vyacheslav

2016-01-01

Full Text Available Industrial safety critical instrumentation and control systems (I&Cs are facing more with information (in general and cyber, in particular security threats and attacks. The application of programmable logic, first of all, field programmable gate arrays (FPGA in critical systems causes specific safety deficits. Security assessment techniques for such systems are based on heuristic knowledges and the expert judgment. Main challenge is how to take into account features of FPGA technology for safety critical I&Cs including systems in which are applied diversity approach to minimize risks of common cause failure. Such systems are called multi-version (MV systems. The goal of the paper is in description of the technique and tool for case-based security assessment of MV FPGA-based I&Cs.

Three-dimensional design methodologies for tree-based FPGA architecture

CERN Document Server

Pangracious, Vinod; Mehrez, Habib

2015-01-01

This book focuses on the development of 3D design and implementation methodologies for Tree-based FPGA architecture. It also stresses the needs for new and augmented 3D CAD tools to support designs such as, the design for 3D, to manufacture high performance 3D integrated circuits and reconfigurable FPGA-based systems. This book was written as a text that covers the foundations of 3D integrated system design and FPGA architecture design. It was written for the use in an elective or core course at the graduate level in field of Electrical Engineering, Computer Engineering and Doctoral Research programs. No previous background on 3D integration is required, nevertheless fundamental understanding of 2D CMOS VLSI design is required. It is assumed that reader has taken the core curriculum in Electrical Engineering or Computer Engineering, with courses like CMOS VLSI design, Digital System Design and Microelectronics Circuits being the most important. It is accessible for self-study by both senior students and profe...

NI Based System for Seu Testing of Memory Chips for Avionics

Directory of Open Access Journals (Sweden)

Boruzdina Anna

2016-01-01

Full Text Available This paper presents the results of implementation of National Instrument based system for Single Event Upset testing of memory chips into neutron generator experimental facility, which used for SEU tests for avionics purposes. Basic SEU testing algorithm with error correction and constant errors detection is presented. The issues of radiation shielding of NI based system are discussed and solved. The examples of experimental results show the applicability of the presented system for SEU memory testing under neutrons influence.

An evaluation and acceptance of COTS software for FPGA-based controllers in NPPS

International Nuclear Information System (INIS)

Jung, Sejin; Kim, Eui-Sub; Yoo, Junbeom; Kim, Jang-Yeol; Choi, Jong Gyun

2016-01-01

Highlights: • All direct/indirect COTS SW should be dedicated. • FPGA synthesis tools are important for the safety of new digital I&Cs. • No standards/reports are yet available to deal with the indirect SW – FPGA synthesis tools. • This paper proposes a new evaluation/acceptance process and criteria for indirect SW. - Abstract: FPGA (Field-Programmable Gate Array) has received much attention from nuclear industry as an alternative platform of PLC (Programmable Logic Controller)-based digital I&C (Instrumentation & Control). Software aspect of FPGA development encompasses several commercial tools such as logic synthesis and P&R (Place & Route), which should be first dedicated in accordance with domestic standards based on EPRI NP-5652. Even if a state-of-the-art supplementary EPRI TR-1025243 makes an effort, the dedication of indirect COTS (Commercial Off-The-Shelf) SW such as FPGA logic synthesis tools has still caused a dispute. This paper proposes an acceptance process and evaluation criteria, specific to COTS SW, not commercial-grade direct items. It specifically incorporates indirect COTS SW and also provides categorized evaluation criteria for acceptance. It provides an explicit linkage between acceptance methods (Verification and Validation techniques) and evaluation criteria, too. We tried to perform the evaluation and acceptance process upon a commercial FPGA logic synthesis tool being used to develop a new FPGA-based digital I&C in Korea, and could confirm its applicability.

Photoelectric radar servo control system based on ARM+FPGA

Science.gov (United States)

Wu, Kaixuan; Zhang, Yue; Li, Yeqiu; Dai, Qin; Yao, Jun

2016-01-01

In order to get smaller, faster, and more responsive requirements of the photoelectric radar servo control system. We propose a set of core ARM + FPGA architecture servo controller. Parallel processing capability of FPGA to be used for the encoder feedback data, PWM carrier modulation, A, B code decoding processing and so on; Utilizing the advantage of imaging design in ARM Embedded systems achieves high-speed implementation of the PID algorithm. After the actual experiment, the closed-loop speed of response of the system cycles up to 2000 times/s, in the case of excellent precision turntable shaft, using a PID algorithm to achieve the servo position control with the accuracy of + -1 encoder input code. Firstly, This article carry on in-depth study of the embedded servo control system hardware to determine the ARM and FPGA chip as the main chip with systems based on a pre-measured target required to achieve performance requirements, this article based on ARM chip used Samsung S3C2440 chip of ARM7 architecture , the FPGA chip is chosen xilinx's XC3S400 . ARM and FPGA communicate by using SPI bus, the advantage of using SPI bus is saving a lot of pins for easy system upgrades required thereafter. The system gets the speed datas through the photoelectric-encoder that transports the datas to the FPGA, Then the system transmits the datas through the FPGA to ARM, transforms speed datas into the corresponding position and velocity data in a timely manner, prepares the corresponding PWM wave to control motor rotation by making comparison between the position data and the velocity data setted in advance . According to the system requirements to draw the schematics of the photoelectric radar servo control system and PCB board to produce specially. Secondly, using PID algorithm to control the servo system, the datas of speed obtained from photoelectric-encoder is calculated position data and speed data via high-speed digital PID algorithm and coordinate models. Finally, a

Development, verification and validation of an FPGA-based core heat removal protection system for a PWR

Energy Technology Data Exchange (ETDEWEB)

Wu, Yichun, E-mail: ycwu@xmu.edu.cn [College of Energy, Xiamen University, Xiamen 361102 (China); Shui, Xuanxuan, E-mail: 807001564@qq.com [College of Energy, Xiamen University, Xiamen 361102 (China); Cai, Yuanfeng, E-mail: 1056303902@qq.com [College of Energy, Xiamen University, Xiamen 361102 (China); Zhou, Junyi, E-mail: 1032133755@qq.com [College of Energy, Xiamen University, Xiamen 361102 (China); Wu, Zhiqiang, E-mail: npic_wu@126.com [State Key Laboratory of Reactor System Design Technology, Nuclear Power Institute of China, Chengdu 610041 (China); Zheng, Jianxiang, E-mail: zwu@xmu.edu.cn [College of Energy, Xiamen University, Xiamen 361102 (China)

2016-05-15

Highlights: • An example on life cycle development process and V&V on FPGA-based I&C is presented. • Software standards and guidelines are used in FPGA-based NPP I&C system logic V&V. • Diversified FPGA design and verification languages and tools are utilized. • An NPP operation principle simulator is used to simulate operation scenarios. - Abstract: To reach high confidence and ensure reliability of nuclear FPGA-based safety system, life cycle processes of discipline specification and implementation of design as well as regulations verification and validation (V&V) are needed. A specific example on how to conduct life cycle development process and V&V on FPGA-based core heat removal (CHR) protection system for CPR1000 pressure water reactor (PWR) is presented in this paper. Using the existing standards and guidelines for life cycle development and V&V, a simplified FPGA-based CHR protection system for PWR has been designed, implemented, verified and validated. Diversified verification and simulation languages and tools are used by the independent design team and the V&V team. In the system acceptance testing V&V phase, a CPR1000 NPP operation principle simulator (OPS) model is utilized to simulate normal and abnormal operation scenarios, and provide input data to the under-test FPGA-based CHR protection system and a verified C code CHR function module. The evaluation results are applied to validate the under-test FPGA-based CHR protection system. The OPS model operation outputs also provide reasonable references for the tests. Using an OPS model in the system acceptance testing V&V is cost-effective and high-efficient. A dedicated OPS, as a commercial-off-the-shelf (COTS) item, would contribute as an important tool in the V&V process of NPP I&C systems, including FPGA-based and microprocessor-based systems.

Realise of PWM-generating based on FPGA

International Nuclear Information System (INIS)

Su Rongfeng; Xu Ruinian; Huang Maomao

2012-01-01

The power supply digital controllers of Shanghai Synchrotron Radiation Facility(SSRF) make use of the PWM (pulse width modulation) wave as the feedback to the power-electrical devices, so as to obtain constant current of high accuracy and stability. The design of PWM wave generation structure in FPGA is good for a compact controller,and the reduction of the usage of Integrated Circuits (ICs) decreases the interference from the noise among the ICs, hence better performance of the controller. In addition, FPGA can be programmed circularly at any time,so as to optimize the structure design and make a maximum use of the advantage of FPGA. As a part of transplanting the complete function of the DSP (digital signal processor/processing), realizing the generation of PWM wave in FPGA is feasible. In this paper, we report progress in this regard at SSRF. (authors)

FPGA-Based Channel Coding Architectures for 5G Wireless Using High-Level Synthesis

Directory of Open Access Journals (Sweden)

Swapnil Mhaske

2017-01-01

Full Text Available We propose strategies to achieve a high-throughput FPGA architecture for quasi-cyclic low-density parity-check codes based on circulant-1 identity matrix construction. By splitting the node processing operation in the min-sum approximation algorithm, we achieve pipelining in the layered decoding schedule without utilizing additional hardware resources. High-level synthesis compilation is used to design and develop the architecture on the FPGA hardware platform. To validate this architecture, an IEEE 802.11n compliant 608 Mb/s decoder is implemented on the Xilinx Kintex-7 FPGA using the LabVIEW FPGA Compiler in the LabVIEW Communication System Design Suite. Architecture scalability was leveraged to accomplish a 2.48 Gb/s decoder on a single Xilinx Kintex-7 FPGA. Further, we present rapidly prototyped experimentation of an IEEE 802.16 compliant hybrid automatic repeat request system based on the efficient decoder architecture developed. In spite of the mixed nature of data processing—digital signal processing and finite-state machines—LabVIEW FPGA Compiler significantly reduced time to explore the system parameter space and to optimize in terms of error performance and resource utilization. A 4x improvement in the system throughput, relative to a CPU-based implementation, was achieved to measure the error-rate performance of the system over large, realistic data sets using accelerated, in-hardware simulation.

An Improved Rotary Interpolation Based on FPGA

Directory of Open Access Journals (Sweden)

Mingyu Gao

2014-08-01

Full Text Available This paper presents an improved rotary interpolation algorithm, which consists of a standard curve interpolation module and a rotary process module. Compared to the conventional rotary interpolation algorithms, the proposed rotary interpolation algorithm is simpler and more efficient. The proposed algorithm was realized on a FPGA with Verilog HDL language, and simulated by the ModelSim software, and finally verified on a two-axis CNC lathe, which uses rotary ellipse and rotary parabolic as an example. According to the theoretical analysis and practical process validation, the algorithm has the following advantages: firstly, less arithmetic items is conducive for interpolation operation; and secondly the computing time is only two clock cycles of the FPGA. Simulations and actual tests have proved that the high accuracy and efficiency of the algorithm, which shows that it is highly suited for real-time applications.

FPGA-Based Sonar Processing

National Research Council Canada - National Science Library

Graham, Paul; Nelson, Brent

1998-01-01

This paper presents the application of time-delay sonar beamforming and discusses a multi-board FPGA system for performing several variations of this beamforming method in real-time for realistic sonar arrays...

An FPGA-based heterogeneous image fusion system design method

Science.gov (United States)

Song, Le; Lin, Yu-chi; Chen, Yan-hua; Zhao, Mei-rong

2011-08-01

Taking the advantages of FPGA's low cost and compact structure, an FPGA-based heterogeneous image fusion platform is established in this study. Altera's Cyclone IV series FPGA is adopted as the core processor of the platform, and the visible light CCD camera and infrared thermal imager are used as the image-capturing device in order to obtain dualchannel heterogeneous video images. Tailor-made image fusion algorithms such as gray-scale weighted averaging, maximum selection and minimum selection methods are analyzed and compared. VHDL language and the synchronous design method are utilized to perform a reliable RTL-level description. Altera's Quartus II 9.0 software is applied to simulate and implement the algorithm modules. The contrast experiments of various fusion algorithms show that, preferably image quality of the heterogeneous image fusion can be obtained on top of the proposed system. The applied range of the different fusion algorithms is also discussed.

Algorithmic strategies for FPGA-based vision

OpenAIRE

Lim, Yoong Kang

2016-01-01

As demands for real-time computer vision applications increase, implementations on alternative architectures have been explored. These architectures include Field-Programmable Gate Arrays (FPGAs), which offer a high degree of flexibility and parallelism. A problem with this is that many computer vision algorithms have been optimized for serial processing, and this often does not map well to FPGA implementation. This thesis introduces the concept of FPGA-tailored computer vision algorithms...

An FPGA-Based People Detection System

Directory of Open Access Journals (Sweden)

James J. Clark

2005-05-01

Full Text Available This paper presents an FPGA-based system for detecting people from video. The system is designed to use JPEG-compressed frames from a network camera. Unlike previous approaches that use techniques such as background subtraction and motion detection, we use a machine-learning-based approach to train an accurate detector. We address the hardware design challenges involved in implementing such a detector, along with JPEG decompression, on an FPGA. We also present an algorithm that efficiently combines JPEG decompression with the detection process. This algorithm carries out the inverse DCT step of JPEG decompression only partially. Therefore, it is computationally more efficient and simpler to implement, and it takes up less space on the chip than the full inverse DCT algorithm. The system is demonstrated on an automated video surveillance application and the performance of both hardware and software implementations is analyzed. The results show that the system can detect people accurately at a rate of about 2.5 frames per second on a Virtex-II 2V1000 using a MicroBlaze processor running at 75 MHz, communicating with dedicated hardware over FSL links.

EXPERIENCE WITH FPGA-BASED PROCESSOR CORE AS FRONT-END COMPUTER

International Nuclear Information System (INIS)

HOFF, L.T.

2005-01-01

The RHIC control system architecture follows the familiar ''standard model''. LINUX workstations are used as operator consoles. Front-end computers are distributed around the accelerator, close to equipment being controlled or monitored. These computers are generally based on VMEbus CPU modules running the VxWorks operating system. I/O is typically performed via the VMEbus, or via PMC daughter cards (via an internal PCI bus), or via on-board I/O interfaces (Ethernet or serial). Advances in FPGA size and sophistication now permit running virtual processor ''cores'' within the FPGA logic, including ''cores'' with advanced features such as memory management. Such systems offer certain advantages over traditional VMEbus Front-end computers. Advantages include tighter coupling with FPGA logic, and therefore higher I/O bandwidth, and flexibility in packaging, possibly resulting in a lower noise environment and/or lower cost. This paper presents the experience acquired while porting the RHIC control system to a PowerPC 405 core within a Xilinx FPGA for use in low-level RF control

A low delay transmission method of multi-channel video based on FPGA

Science.gov (United States)

Fu, Weijian; Wei, Baozhi; Li, Xiaobin; Wang, Quan; Hu, Xiaofei

2018-03-01

In order to guarantee the fluency of multi-channel video transmission in video monitoring scenarios, we designed a kind of video format conversion method based on FPGA and its DMA scheduling for video data, reduces the overall video transmission delay.In order to sace the time in the conversion process, the parallel ability of FPGA is used to video format conversion. In order to improve the direct memory access (DMA) writing transmission rate of PCIe bus, a DMA scheduling method based on asynchronous command buffer is proposed. The experimental results show that this paper designs a low delay transmission method based on FPGA, which increases the DMA writing transmission rate by 34% compared with the existing method, and then the video overall delay is reduced to 23.6ms.

Embedded Active Vision System Based on an FPGA Architecture

Directory of Open Access Journals (Sweden)

Chalimbaud Pierre

2007-01-01

Full Text Available In computer vision and more particularly in vision processing, the impressive evolution of algorithms and the emergence of new techniques dramatically increase algorithm complexity. In this paper, a novel FPGA-based architecture dedicated to active vision (and more precisely early vision is proposed. Active vision appears as an alternative approach to deal with artificial vision problems. The central idea is to take into account the perceptual aspects of visual tasks, inspired by biological vision systems. For this reason, we propose an original approach based on a system on programmable chip implemented in an FPGA connected to a CMOS imager and an inertial set. With such a structure based on reprogrammable devices, this system admits a high degree of versatility and allows the implementation of parallel image processing algorithms.

Embedded Active Vision System Based on an FPGA Architecture

Directory of Open Access Journals (Sweden)

Pierre Chalimbaud

2006-12-01

Full Text Available In computer vision and more particularly in vision processing, the impressive evolution of algorithms and the emergence of new techniques dramatically increase algorithm complexity. In this paper, a novel FPGA-based architecture dedicated to active vision (and more precisely early vision is proposed. Active vision appears as an alternative approach to deal with artificial vision problems. The central idea is to take into account the perceptual aspects of visual tasks, inspired by biological vision systems. For this reason, we propose an original approach based on a system on programmable chip implemented in an FPGA connected to a CMOS imager and an inertial set. With such a structure based on reprogrammable devices, this system admits a high degree of versatility and allows the implementation of parallel image processing algorithms.

Tethered Forth system for FPGA applications

Science.gov (United States)

Goździkowski, Paweł; Zabołotny, Wojciech M.

2013-10-01

This paper presents the tethered Forth system dedicated for testing and debugging of FPGA based electronic systems. Use of the Forth language allows to interactively develop and run complex testing or debugging routines. The solution is based on a small, 16-bit soft core CPU, used to implement the Forth Virtual Machine. Thanks to the use of the tethered Forth model it is possible to minimize usage of the internal RAM memory in the FPGA. The function of the intelligent terminal, which is an essential part of the tethered Forth system, may be fulfilled by the standard PC computer or by the smartphone. System is implemented in Python (the software for intelligent terminal), and in VHDL (the IP core for FPGA), so it can be easily ported to different hardware platforms. The connection between the terminal and FPGA may be established and disconnected many times without disturbing the state of the FPGA based system. The presented system has been verified in the hardware, and may be used as a tool for debugging, testing and even implementing of control algorithms for FPGA based systems.

Time and Power Optimizations in FPGA-Based Architectures for Polyphase Channelizers

DEFF Research Database (Denmark)

Awan, Mehmood-Ur-Rehman; Harris, Fred; Koch, Peter

2012-01-01

This paper presents the time and power optimization considerations for Field Programmable Gate Array (FPGA) based architectures for a polyphase filter bank channelizer with an embedded square root shaping filter in its polyphase engine. This configuration performs two different re-sampling tasks......% slice register resources of a Xilinx Virtex-5 FPGA, operating at 400 and 480 MHz, and consuming 1.9 and 2.6 Watts of dynamic power, respectively....

Fault tolerance based on serial communication of FPGA

International Nuclear Information System (INIS)

Peng Jing; Fang Zongliang; Xu Quanzhou; Hu Jiewei; Ma Guizhen

2012-01-01

There maybe appear mistake in serial communication. This paper was described the intellectual detector of γ dose ratemeter communication with FPGA. The software of FPGA designed the code about fault tolerance, prevented mistake effectively. (authors)

Evaluation of CHO Benchmarks on the Arria 10 FPGA using Intel FPGA SDK for OpenCL

Energy Technology Data Exchange (ETDEWEB)

Jin, Zheming [Argonne National Lab. (ANL), Argonne, IL (United States); Yoshii, Kazutomo [Argonne National Lab. (ANL), Argonne, IL (United States); Finkel, Hal [Argonne National Lab. (ANL), Argonne, IL (United States); Cappello, Franck [Argonne National Lab. (ANL), Argonne, IL (United States)

2017-05-23

The OpenCL standard is an open programming model for accelerating algorithms on heterogeneous computing system. OpenCL extends the C-based programming language for developing portable codes on different platforms such as CPU, Graphics processing units (GPUs), Digital Signal Processors (DSPs) and Field Programmable Gate Arrays (FPGAs). The Intel FPGA SDK for OpenCL is a suite of tools that allows developers to abstract away the complex FPGA-based development flow for a high-level software development flow. Users can focus on the design of hardware-accelerated kernel functions in OpenCL and then direct the tools to generate the low-level FPGA implementations. The approach makes the FPGA-based development more accessible to software users as the needs for hybrid computing using CPUs and FPGAs are increasing. It can also significantly reduce the hardware development time as users can evaluate different ideas with high-level language without deep FPGA domain knowledge. Benchmarking of OpenCL-based framework is an effective way for analyzing the performance of system by studying the execution of the benchmark applications. CHO is a suite of benchmark applications that provides support for OpenCL [1]. The authors presented CHO as an OpenCL port of the CHStone benchmark. Using Altera OpenCL (AOCL) compiler to synthesize the benchmark applications, they listed the resource usage and performance of each kernel that can be successfully synthesized by the compiler. In this report, we evaluate the resource usage and performance of the CHO benchmark applications using the Intel FPGA SDK for OpenCL and Nallatech 385A FPGA board that features an Arria 10 FPGA device. The focus of the report is to have a better understanding of the resource usage and performance of the kernel implementations using Arria-10 FPGA devices compared to Stratix-5 FPGA devices. In addition, we also gain knowledge about the limitations of the current compiler when it fails to synthesize a benchmark

Design of CMOS imaging system based on FPGA

Science.gov (United States)

Hu, Bo; Chen, Xiaolai

2017-10-01

In order to meet the needs of engineering applications for high dynamic range CMOS camera under the rolling shutter mode, a complete imaging system is designed based on the CMOS imaging sensor NSC1105. The paper decides CMOS+ADC+FPGA+Camera Link as processing architecture and introduces the design and implementation of the hardware system. As for camera software system, which consists of CMOS timing drive module, image acquisition module and transmission control module, the paper designs in Verilog language and drives it to work properly based on Xilinx FPGA. The ISE 14.6 emulator ISim is used in the simulation of signals. The imaging experimental results show that the system exhibits a 1280*1024 pixel resolution, has a frame frequency of 25 fps and a dynamic range more than 120dB. The imaging quality of the system satisfies the requirement of the index.

FPGA-based network data transmission scheme for CSNS

International Nuclear Information System (INIS)

Wang Xiuku; Zhang Hongyu; Gu Minhao; Xiao Liang

2012-01-01

This paper presents the FPGA-based network data transmission solutions for the Data Acquisition System of China Spallation Neutron Source (CSNS). The board with FPGA as the core is used as the hardware platform to realize the transmission of network data. A SOPC system is built and an embedded Linux is transplanted on PowerPC Core. An application program based on Linux has been finished to realize the data transmission via embedded Gigabit Ethernet. The relationship between network transfer performance and packet size was obtained by a test program. In addition, the paper also tried to realize some other ways to transfer data: transplanting PetaLinux on Microblaze, transplanting Lwip protocol stack on PowerPC Core and Microblaze. Their advantages and disadvantages are analyzed and compared in this paper, so that different options and recommendations can be given to meet the actual needs of different projects in the future. (authors)

FPGA-Based Communications Receivers for Smart Antenna Array Embedded Systems

Directory of Open Access Journals (Sweden)

Millar James

2006-01-01

Full Text Available Field-programmable gate arrays (FPGAs are drawing ever increasing interest from designers of embedded wireless communications systems. They outpace digital signal processors (DSPs, through hardware execution of a wide range of parallelizable communications transceiver algorithms, at a fraction of the design and implementation effort and cost required for application-specific integrated circuits (ASICs. In our study, we employ an Altera Stratix FPGA development board, along with the DSP Builder software tool which acts as a high-level interface to the powerful Quartus II environment. We compare single- and multibranch FPGA-based receiver designs in terms of error rate performance and power consumption. We exploit FPGA operational flexibility and algorithm parallelism to design eigenmode-monitoring receivers that can adapt to variations in wireless channel statistics, for high-performing, inexpensive, smart antenna array embedded systems.

FPGA-Based Communications Receivers for Smart Antenna Array Embedded Systems

Directory of Open Access Journals (Sweden)

James Millar

2006-10-01

Full Text Available Field-programmable gate arrays (FPGAs are drawing ever increasing interest from designers of embedded wireless communications systems. They outpace digital signal processors (DSPs, through hardware execution of a wide range of parallelizable communications transceiver algorithms, at a fraction of the design and implementation effort and cost required for application-specific integrated circuits (ASICs. In our study, we employ an Altera Stratix FPGA development board, along with the DSP Builder software tool which acts as a high-level interface to the powerful Quartus II environment. We compare single- and multibranch FPGA-based receiver designs in terms of error rate performance and power consumption. We exploit FPGA operational flexibility and algorithm parallelism to design eigenmode-monitoring receivers that can adapt to variations in wireless channel statistics, for high-performing, inexpensive, smart antenna array embedded systems.

FPGA-based technology for Pulse Height Analysis in nuclear spectrometry system

International Nuclear Information System (INIS)

Andrianiaina, H.; Raoelina Andriambololona; Rajaobelison, J.; Rambolamanana, G.; Roengen, H.

2009-01-01

Facing the rapid technology development applied in nuclear instruments, Madagascar-INSTN has taken measures to estabilish and enhance the national capabilities in their maintenance, calibration, design/modification and repair, which is a key factor in the development of sustainable nuclear technology.The maintenance will be more convenient if all technical resources are made available: this is only possible when the acces to designer side of the instruments is permitted. Research and instrumentation development projects have been developed to support and to fit the local needs: Pulse Height Analysis algorithm is designed within FPGA and VHDL programming technics to build a Multi-Input Multi-Channel Analyzer. Description and measurement results with the MIMCA will be described in the present paper

A single FPGA-based portable ultrasound imaging system for point-of-care applications.

Science.gov (United States)

Kim, Gi-Duck; Yoon, Changhan; Kye, Sang-Bum; Lee, Youngbae; Kang, Jeeun; Yoo, Yangmo; Song, Tai-kyong

2012-07-01

We present a cost-effective portable ultrasound system based on a single field-programmable gate array (FPGA) for point-of-care applications. In the portable ultrasound system developed, all the ultrasound signal and image processing modules, including an effective 32-channel receive beamformer with pseudo-dynamic focusing, are embedded in an FPGA chip. For overall system control, a mobile processor running Linux at 667 MHz is used. The scan-converted ultrasound image data from the FPGA are directly transferred to the system controller via external direct memory access without a video processing unit. The potable ultrasound system developed can provide real-time B-mode imaging with a maximum frame rate of 30, and it has a battery life of approximately 1.5 h. These results indicate that the single FPGA-based portable ultrasound system developed is able to meet the processing requirements in medical ultrasound imaging while providing improved flexibility for adapting to emerging POC applications.

SEU-hardened design for shift register in CMOS APS

International Nuclear Information System (INIS)

Meng Liya; Liu Zedong; Hu Dajiang; Wang Qingxiang

2012-01-01

The inverter-based quasi-static shift register in CMOS APS, which is used in ionizing radiation environment, is susceptible to single event upset (SEU), thus affecting the CMOS active pixel sensor (APS) working. The analysis of the SEU for inverter-based quasi-static shift register concludes that the most sensitive node to single event transient (SET) exists in the input of inverter, and the threshold voltage and capacitance of input node of inverter determine the capability of anti-SEU. A new method was proposed, which replaced the inverter with Schmitt trigger in shift register. Because there is a hysteresis on voltage transfer characteristic of Schmitt trigger, there is high flip threshold, thus better capability of anti-SEU can be achieved. Simulation results show that the anti-SEU capability of Schmitt trigger is 10 times more than that of inverter. (authors)

FPGA-based architecture for motion recovering in real-time

Science.gov (United States)

Arias-Estrada, Miguel; Maya-Rueda, Selene E.; Torres-Huitzil, Cesar

2002-03-01

A key problem in the computer vision field is the measurement of object motion in a scene. The main goal is to compute an approximation of the 3D motion from the analysis of an image sequence. Once computed, this information can be used as a basis to reach higher level goals in different applications. Motion estimation algorithms pose a significant computational load for the sequential processors limiting its use in practical applications. In this work we propose a hardware architecture for motion estimation in real time based on FPGA technology. The technique used for motion estimation is Optical Flow due to its accuracy, and the density of velocity estimation, however other techniques are being explored. The architecture is composed of parallel modules working in a pipeline scheme to reach high throughput rates near gigaflops. The modules are organized in a regular structure to provide a high degree of flexibility to cover different applications. Some results will be presented and the real-time performance will be discussed and analyzed. The architecture is prototyped in an FPGA board with a Virtex device interfaced to a digital imager.

Template characterization and correlation algorithm created from segmentation for the iris biometric authentication based on analysis of textures implemented on a FPGA

International Nuclear Information System (INIS)

Giacometto, F J; Vilardy, J M; Torres, C O; Mattos, L

2011-01-01

Among the most used biometric signals to set personal security permissions, taker increasingly importance biometric iris recognition based on their textures and images of blood vessels due to the rich in these two unique characteristics that are unique to each individual. This paper presents an implementation of an algorithm characterization and correlation of templates created for biometric authentication based on iris texture analysis programmed on a FPGA (Field Programmable Gate Array), authentication is based on processes like characterization methods based on frequency analysis of the sample, and frequency correlation to obtain the expected results of authentication.

Exploration of Heterogeneous FPGA Architectures

Directory of Open Access Journals (Sweden)

Umer Farooq

2011-01-01

mesh and tree-based architectures are evaluated for three sets of benchmark circuits. Experimental results show that a more flexible floor-planning in mesh-based FPGA gives better results as compared to the column-based floor-planning. Also it is shown that compared to different floor-plannings of mesh-based FPGA, tree-based architecture gives better area, performance, and power results.

FPGA-based reconfigurable processor for ultrafast interlaced ultrasound and photoacoustic imaging.

Science.gov (United States)

Alqasemi, Umar; Li, Hai; Aguirre, Andrés; Zhu, Quing

2012-07-01

In this paper, we report, to the best of our knowledge, a unique field-programmable gate array (FPGA)-based reconfigurable processor for real-time interlaced co-registered ultrasound and photoacoustic imaging and its application in imaging tumor dynamic response. The FPGA is used to control, acquire, store, delay-and-sum, and transfer the data for real-time co-registered imaging. The FPGA controls the ultrasound transmission and ultrasound and photoacoustic data acquisition process of a customized 16-channel module that contains all of the necessary analog and digital circuits. The 16-channel module is one of multiple modules plugged into a motherboard; their beamformed outputs are made available for a digital signal processor (DSP) to access using an external memory interface (EMIF). The FPGA performs a key role through ultrafast reconfiguration and adaptation of its structure to allow real-time switching between the two imaging modes, including transmission control, laser synchronization, internal memory structure, beamforming, and EMIF structure and memory size. It performs another role by parallel accessing of internal memories and multi-thread processing to reduce the transfer of data and the processing load on the DSP. Furthermore, because the laser will be pulsing even during ultrasound pulse-echo acquisition, the FPGA ensures that the laser pulses are far enough from the pulse-echo acquisitions by appropriate time-division multiplexing (TDM). A co-registered ultrasound and photoacoustic imaging system consisting of four FPGA modules (64-channels) is constructed, and its performance is demonstrated using phantom targets and in vivo mouse tumor models.

Implementing EW Receivers Based on Large Point Reconfigured FFT on FPGA Platforms

Directory of Open Access Journals (Sweden)

He Chen

2011-12-01

Full Text Available This paper presents design and implementation of digital receiver based on large point fast Fourier transform (FFT suitable for electronic warfare (EW applications. When implementing the FFT algorithm on field-programmable gate array (FPGA platforms, the primary goal is to maximize throughput and minimize area. This algorithm adopts two-dimension, parallel and pipeline stream mode and implements the reconfiguration of FFT's points. Moreover, a double-sequence-separation FFT algorithm has been implemented in order to achieve faster real time processing in broadband digital receivers. The performance of the hardware implementation on the FPGA platforms of broadband digital receivers has been analyzed in depth. It reaches the requirement of high-speed digital signal processing, and reveals the designing this kind of digital signal processing systems on FPGA platforms. Keywords: digital receivers, field programmable gate array (FPGA, fast Fourier transform (FFT, large point reconfigured, signal processing system.

An FPGA-Based Multiple-Axis Velocity Controller and Stepping Motors Drives Design

Directory of Open Access Journals (Sweden)

Lai Chiu-Keng

2016-01-01

Full Text Available A Field Programmable Gate Array based system is a great hardware platform to support the implementation of hardware controllers such as PID controller and fuzzy controller. It is also programmed as hardware accelerator to speed up the mathematic calculation and greatly enhance the performance as applied to motor drive and motion control. Furthermore, the open structure of FPGA-based system is suitable for those designs with the ability of parallel processing or soft code processor embedded. In this paper, we apply the FPGA to a multi-axis velocity controller design. The developed system integrated three functions inside the FPGA chip, which are respectively the stepping motor drive, the multi-axis motion controller and the motion planning. Furthermore, an embedded controller with a soft code processor compatible to 8051 micro-control unit (MCU is built to handle the data transfer between the FPGA board and host PC. The MCU is also used to initialize the motion control and run the interpolator. The designed system is practically applied to a XYZ motion platform which is driven by stepping motors to verify its performance.

Design Verification Enhancement of FPGA-based Plant Protection System Trip Logics for Nuclear Power Plant

International Nuclear Information System (INIS)

Ahmed, Ibrahim; Jung, Jae Cheon; Heo, Gyun Young

2016-01-01

As part of strengthening the application of FPGA technology and find solution to its challenges in NPPs, international atomic energy agency (IAEA) has indicated interest by joining sponsorship of Topical Group on FPGA Applications in NPPs (TG-FAN) that hold meetings up to 7th times until now, in form of workshop (International workshop on the application of FPGAs in NPPs) annually since 2008. The workshops attracted a significant interest and had a broad representation of stakeholders such as regulators, utilities, research organizations, system designers, and vendors, from various countries that converge to discuss the current issues regarding instrumentation and control (I and C) systems as well as FPGA applications. Two out of many technical issues identified by the group are lifecycle of FPGA-based platforms, systems, and applications; and methods and tools for V and V. Therefore, in this work, several design steps that involved the use of model-based systems engineering process as well as MATLAB/SIMULINK model which lead to the enhancement of design verification are employed. The verified and validated design output works correctly and effectively. Conclusively, the model-based systems engineering approach and the structural step-by-step design modeling techniques including SIMULINK model utilized in this work have shown how FPGA PPS trip logics design verification can be enhanced. If these design approaches are employ in the design of FPGA-based I and C systems, the design can be easily verified and validated

Wire Position Monitoring with FPGA based Electronics

International Nuclear Information System (INIS)

Eddy, N.; Lysenko, O.

2009-01-01

This fall the first Tesla-style cryomodule cooldown test is being performed at Fermilab. Instrumentation department is preparing the electronics to handle the data from a set of wire position monitors (WPMs). For simulation purposes a prototype pipe with a WMP has been developed and built. The system is based on the measurement of signals induced in pickups by 320 MHz signal carried by a wire through the WPM. The wire is stretched along the pipe with a tensioning load of 9.07 kg. The WPM consists of four 50 (Omega) striplines spaced 90 o apart. FPGA based digitizer scans the WPM and transmits the data to a PC via VME interface. The data acquisition is based on the PC running LabView. In order to increase the accuracy and convenience of the measurements some modifications were required. The first is implementation of an average and decimation filter algorithm in the integrator operation in the FPGA. The second is the development of alternative tool for WPM measurements in the PC. The paper describes how these modifications were performed and test results of a new design. The last cryomodule generation has a single chain of seven WPMs (placed in critical positions: at each end, at the three posts and between the posts) to monitor a cold mass displacement during cooldown. The system was developed in Italy in collaboration with DESY. Similar developments have taken place at Fermilab in the frame of cryomodules construction for SCRF research. This fall preliminary cryomodule cooldown test is being performed. In order to prepare an appropriate electronic system for the test a prototype pipe with a WMP has been developed and built, figure 1. The system is based on the measurement of signals induced in pickups by 320 MHz signal carried by a wire through the WPM. The 0.5 mm diameter Cu wire is stretched along the pipe with a tensioning load of 9.07 kg and has a length of 1.1 m. The WPM consists of four 50 (Omega) striplines spaced 90 o apart. An FPGA based digitizer

New slow-control FPGA IP for GBT based system and status update of the GBT-FPGA project

CERN Document Server

Mendez, Julian Maxime; Caratelli, Alessandro; Leitao, Pedro Vicente

2018-01-01

The GBT-FPGA, part of the GBT (GigaBit Transceiver) project framework, is a VHDL-based core designed to offer a back-end counterpart to the GBTx ASIC, a radiation tolerant 4.8 Gb/s optical transceiver. The GBT-SCA (Slow Control Adapter) radiation tolerant ASIC is also part of the GBT chipset and is used for the slow control in the High Energy Physics experiments. In this context, a new VHDL core named GBT-SC has been designed and released to handle the slow control fields hosted in the serial GBT frame for the GBTx and GBT-SCA. This paper presents the architecture and performance of this new GBT-SC module as well as an outline of recent GBT-FPGA core releases and future plans.

FPGA design best practices for team-based reuse

CERN Document Server

Simpson, Philip Andrew

2015-01-01

This book describes best practices for successful FPGA design. It is the result of the author’s meetings with hundreds of customers on the challenges facing each of their FPGA design teams. By gaining an understanding into their design environments, processes, what works and what does not work, key areas of concern in implementing system designs have been identified and a recommended design methodology to overcome these challenges has been developed. This book’s content has a strong focus on design teams that are spread across sites. The goal being to increase the productivity of FPGA design teams by establishing a common methodology across design teams; enabling the exchange of design blocks across teams. Coverage includes the complete FPGA design flow, from the basics to advanced techniques.  This new edition has been enhanced to include new sections on System modeling, embedded design and high level design. The original sections on Design Environment, RTL design and timing closure have all been expand...

FPGA communications based on Gigabit Ethernet

International Nuclear Information System (INIS)

Doolittle, L.R.; Serrano, C.

2012-01-01

The use of Field Programmable Gate Arrays (FPGAs) in accelerators is widespread due to their flexibility, performance, and reasonable costs. Whether they are used for fast feedback systems, data acquisition, fast communications using custom protocols, or any other application, there is a need for the end-user and the global control software to access FPGA features using a commodity computer. The choice of communication standards that can be used to interface to a FPGA board is wide, however there is one that stands out for its maturity, basis in standards, performance, and hardware support: Gigabit Ethernet. In the context of accelerators it is desirable to have highly reliable, portable, and flexible solutions. We have therefore developed a chip and board-independent FPGA design which implements the Gigabit Ethernet (GbE) standard. Our design has been configured for use with multiple projects, supports full line-rate traffic, and communicates with any other device implementing the same well-established protocol, easily supported by any modern workstation or controls computer. (authors)

RADIOMETRIC CALIBRATION OF MARS HiRISE HIGH RESOLUTION IMAGERY BASED ON FPGA

Directory of Open Access Journals (Sweden)

Y. Hou

2016-06-01

Full Text Available Due to the large data amount of HiRISE imagery, traditional radiometric calibration method is not able to meet the fast processing requirements. To solve this problem, a radiometric calibration system of HiRISE imagery based on field program gate array (FPGA is designed. The montage gap between two channels caused by gray inconsistency is removed through histogram matching. The calibration system is composed of FPGA and DSP, which makes full use of the parallel processing ability of FPGA and fast computation as well as flexible control characteristic of DSP. Experimental results show that the designed system consumes less hardware resources and the real-time processing ability of radiometric calibration of HiRISE imagery is improved.

A Test Methodology for Determining Space-Readiness of Xilinx SRAM-Based FPGA Designs

International Nuclear Information System (INIS)

Quinn, Heather M.; Graham, Paul S.; Morgan, Keith S.; Caffrey, Michael P.

2008-01-01

Using reconfigurable, static random-access memory (SRAM) based field-programmable gate arrays (FPGAs) for space-based computation has been an exciting area of research for the past decade. Since both the circuit and the circuit's state is stored in radiation-tolerant memory, both could be alterd by the harsh space radiation environment. Both the circuit and the circuit's state can be prote cted by triple-moduler redundancy (TMR), but applying TMR to FPGA user designs is often an error-prone process. Faulty application of TMR could cause the FPGA user circuit to output incorrect data. This paper will describe a three-tiered methodology for testing FPGA user designs for space-readiness. We will describe the standard approach to testing FPGA user designs using a particle accelerator, as well as two methods using fault injection and a modeling tool. While accelerator testing is the current 'gold standard' for pre-launch testing, we believe the use of fault injection and modeling tools allows for easy, cheap and uniform access for discovering errors early in the design process.

Study of FPGA and GPU based pixel calibration for ATLAS IBL

CERN Document Server

Dopke, J; The ATLAS collaboration; Flick, T; Gabrielli, A; Grosse-Knetter, J; Krieger, N; Kugel, A; Polini, A; Schroer, N

2010-01-01

The insertable B-layer (IBL) is a new stage of the ATLAS pixel detector to be installed around 2014. 12 million pixel are attached to new FE-I4 readout ASICs, each controlling 26680 pixel. Compared to the existing FE-I3 based detector the new system features higher readout speed of 160Mbit/s per ASIC and simplified control. For calibration defined charges are applied to all pixels and the resulting time-over-threshold values are evaluated. In the present system multiple sets of two custom VME cards which employ a combination of FPGA and DSP technology are used for I/O interfacing, formatting and processing. The execution time of 51s to perform a threshold scan on a FE-I3 module of 46080 pixel is composed of 8s control, 29s transfer, 7.5s histogramming and 7s analysis. Extrapolating to FE-I4 the times per module of 53760 pixels are 12ms, 5.8s, 9.4s and 8.3s, a total of 23.5s. We present a proposal for a novel approach to the dominant tasks for FE-I4: histogramming and ananlysis. An FPGA-based histogramming uni...

Data acquisition system for charge-division mechanism based on FPGA

International Nuclear Information System (INIS)

Yang Litao; Li Dongcang; Yang Lei; Wu Huaiyi; Qi Zhong

2010-01-01

Design a system of Peak value acquisition, data processing and data output for 4 channels nuclear signal at the same time by FPGA that base on the basic principle of position information readout for particle through Charger-division Mechanism. In view of the randomness of nuclear signal, so insert asynchronous FIFO in the system, which greatly improve the sampling rate of system. In the article has produced the conjunctive relation and inner circuit structure and give out simulation. From here, you can see the great power of FPGA which used in nuclear data acquisition and processing system. (authors)

Motion camera based on a custom vision sensor and an FPGA architecture

Science.gov (United States)

Arias-Estrada, Miguel

1998-09-01

A digital camera for custom focal plane arrays was developed. The camera allows the test and development of analog or mixed-mode arrays for focal plane processing. The camera is used with a custom sensor for motion detection to implement a motion computation system. The custom focal plane sensor detects moving edges at the pixel level using analog VLSI techniques. The sensor communicates motion events using the event-address protocol associated to a temporal reference. In a second stage, a coprocessing architecture based on a field programmable gate array (FPGA) computes the time-of-travel between adjacent pixels. The FPGA allows rapid prototyping and flexible architecture development. Furthermore, the FPGA interfaces the sensor to a compact PC computer which is used for high level control and data communication to the local network. The camera could be used in applications such as self-guided vehicles, mobile robotics and smart surveillance systems. The programmability of the FPGA allows the exploration of further signal processing like spatial edge detection or image segmentation tasks. The article details the motion algorithm, the sensor architecture, the use of the event- address protocol for velocity vector computation and the FPGA architecture used in the motion camera system.

The implementing of high resolution time measuring circuit based on FPGA

International Nuclear Information System (INIS)

Zhang Ji; Zeng Yun; Wang Zheng; Li Quiju; Lu Jifang; Wu Jinyuan

2011-01-01

It presents the implementing of TDC based on FPGA. The fine timing function part is accomplished through the time interpolators that are composed of the carry chain of intrinsic adders in FPGA. This architecture dates back to the latest technology-WUTDC (Wave Union TDC) that is developed to sub-divide the ultra-wide bins and improve the measure resolution. The board and the online test have been proved that the linearity of converters is satisfying and the time resolution is better than 40 ps. (authors)

LDPC decoder with a limited-precision FPGA-based floating-point multiplication coprocessor

Science.gov (United States)

Moberly, Raymond; O'Sullivan, Michael; Waheed, Khurram

2007-09-01

Implementing the sum-product algorithm, in an FPGA with an embedded processor, invites us to consider a tradeoff between computational precision and computational speed. The algorithm, known outside of the signal processing community as Pearl's belief propagation, is used for iterative soft-decision decoding of LDPC codes. We determined the feasibility of a coprocessor that will perform product computations. Our FPGA-based coprocessor (design) performs computer algebra with significantly less precision than the standard (e.g. integer, floating-point) operations of general purpose processors. Using synthesis, targeting a 3,168 LUT Xilinx FPGA, we show that key components of a decoder are feasible and that the full single-precision decoder could be constructed using a larger part. Soft-decision decoding by the iterative belief propagation algorithm is impacted both positively and negatively by a reduction in the precision of the computation. Reducing precision reduces the coding gain, but the limited-precision computation can operate faster. A proposed solution offers custom logic to perform computations with less precision, yet uses the floating-point format to interface with the software. Simulation results show the achievable coding gain. Synthesis results help theorize the the full capacity and performance of an FPGA-based coprocessor.

Note: Design of FPGA based system identification module with application to atomic force microscopy

Science.gov (United States)

Ghosal, Sayan; Pradhan, Sourav; Salapaka, Murti

2018-05-01

The science of system identification is widely utilized in modeling input-output relationships of diverse systems. In this article, we report field programmable gate array (FPGA) based implementation of a real-time system identification algorithm which employs forgetting factors and bias compensation techniques. The FPGA module is employed to estimate the mechanical properties of surfaces of materials at the nano-scale with an atomic force microscope (AFM). The FPGA module is user friendly which can be interfaced with commercially available AFMs. Extensive simulation and experimental results validate the design.

An Integrated Software Development Framework for PLC and FPGA based Digital I and Cs

International Nuclear Information System (INIS)

Yoo, Jun Beom; Kim, Eui Sub; Lee, Dong Ah; Choi, Jong Gyun

2014-01-01

NuDE 2.0 (Nuclear Development Environment) is a model-based software development environment for safety- critical digital systems in nuclear power plants. It makes possible to develop PLC-based systems as well as FPGA-based systems simultaneously from the same requirement or design specifications. The case study showed that the NuDE 2.0 can be adopted as an effective method of bridging the gap between the existing PLC and upcoming FPGA-based developments as well as a means of gaining diversity

An Integrated Software Development Framework for PLC and FPGA based Digital I and Cs

Energy Technology Data Exchange (ETDEWEB)

Yoo, Jun Beom; Kim, Eui Sub; Lee, Dong Ah [Konkuk University, Seoul (Korea, Republic of); Choi, Jong Gyun [KAERI, Daejeon (Korea, Republic of)

2014-08-15

NuDE 2.0 (Nuclear Development Environment) is a model-based software development environment for safety- critical digital systems in nuclear power plants. It makes possible to develop PLC-based systems as well as FPGA-based systems simultaneously from the same requirement or design specifications. The case study showed that the NuDE 2.0 can be adopted as an effective method of bridging the gap between the existing PLC and upcoming FPGA-based developments as well as a means of gaining diversity.

Intermediate Frequency Digital Receiver Based on Multi-FPGA System

Directory of Open Access Journals (Sweden)

Chengchang Zhang

2016-01-01

Full Text Available Aiming at high-cost, large-size, and inflexibility problems of traditional analog intermediate frequency receiver in the aerospace telemetry, tracking, and command (TTC system, we have proposed a new intermediate frequency (IF digital receiver based on Multi-FPGA system in this paper. Digital beam forming (DBF is realized by coordinated rotation digital computer (CORDIC algorithm. An experimental prototype has been developed on a compact Multi-FPGA system with three FPGAs to receive 16 channels of IF digital signals. Our experimental results show that our proposed scheme is able to provide a great convenience for the design of IF digital receiver, which offers a valuable reference for real-time, low power, high density, and small size receiver design.

Performance enhancement of multi-core fiber transmission using real-time FPGA based pre-emphasis

DEFF Research Database (Denmark)

Hasanuzzaman, G. K.M.; Spolitis, Sandis; Salgals, T.

2017-01-01

We experimentally demonstrate pre-emphasis based performance for a 2 km long 7-core multicore fiber link. Simultaneous transmission below the FEC threshold is achievable for all cores by using signal equalization in a FPGA.......We experimentally demonstrate pre-emphasis based performance for a 2 km long 7-core multicore fiber link. Simultaneous transmission below the FEC threshold is achievable for all cores by using signal equalization in a FPGA....

An FPGA bridge preserving traffing quality of service for on-chip network-based systems

NARCIS (Netherlands)

Nejad, A.B.; Escudero Martinez, M.; Goossens, K.G.W.

2011-01-01

FPGA prototyping of recent large Systems on Chip (SoCs) is very challenging due to the resource limitation of a single FPGA. Moreover, having external access to SoCs for verification and debug purposes is essential. In this paper, we suggest to partition a network-on-chip (NoC) based system into

FPGA Design Methodologies Applicable to Nuclear Power Plants

International Nuclear Information System (INIS)

Kwong, Yongil; Jeong, Choongheui

2013-01-01

In order to solve the above problem, NPPs in some countries such as the US, Canada and Japan have already applied FPGA-based equipment which has advantages as follows: It is easier to verify the performance because it needs only HDL code to configure logic circuits without other software, compared to microprocessor-based equipment, It is much cheaper than ASIC in a small quantity, Its logic circuits are re configurable, It has enough resources like logic blocks and memory blocks to implement I and C functions, Multiple functions can be implemented in a FPGA chip, It is stronger with respect to carboy security than microprocessor-based equipment because its configuration cannot be changed by external access, It is simple to replace it with new one when it is obsolete, Its power consumption is lower. However, FPGA-based equipment does not have only the merits. There are some issues on its application to NPPs. First of all, the experiences in applying it to NPPs are much less than to other industries, and international standards or guidelines are also very few. And there is the small number of FPGA platforms for I and C systems. Finally, the specific guidelines on FPGA design are required because the design has both hardware and software characteristics. In order to handle the above issues, KINS(Korea Institute of Nuclear Safety) built a test platform last year and have developed regulatory guidelines for FPGA-application in NPPs. I and C systems of NPPs have been increasingly using FPGA-based equipment as an alternative of microprocessor-based equipment which is not simple to be evaluated for safety due to its complexity. This paper explained the FPGA design flow and design guidelines. Those methodologies can be used as the guidelines on FPGA verification for safety of I and C systems

Protection and Control with FPGA technology

Energy Technology Data Exchange (ETDEWEB)

Sohn, K. Y.; Yi, W. J. [Korea Reliability Technology and System, Daejeon (Korea, Republic of); Koo, I. S. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2012-03-15

To cope with the experiences such as unsatisfied response time of control and protection system, components obsolescence of those systems, and outstanding coercion of system modernization, nuclear society is striving to resolve this issue fundamentally. The reports and standards issued from IAEA and other standard organization like IBC is interested in the FPGA technology, which is fairly mature technology in other fields of industry. Intuitively it is replacing the high level of micro-processor type equipped with various software and hardware, which causes to accelerate the aging and obsolescence, and demands for system modernization in I and C system in Nuclear Power Plant. Thus utility has to spend much time and effort to upgrade I and C system throughout a decease. This paper summarizes the need of FPGA technology in Nuclear Power Plant, describing the characteristics of FPGA, test methodology and design requirements. Also the specific design and implementation experiences brought up in the course of FPGA-based controller, which has been conducted in KoRTS. The certification and verification and validation process to ensure the integrity of FPGA-based controller will be addressed. After that, Diverse Protection System (DPS) for YGN Unit 3 and 4 that is implemented via VHDL through SDLC is loaded on FPGA-based controller for run-time experimentations such as functionality, performance, integrity and reliability. Some of the test data is addressed in this paper.

Protection and Control with FPGA technology

International Nuclear Information System (INIS)

Sohn, K. Y.; Yi, W. J.; Koo, I. S.

2012-01-01

To cope with the experiences such as unsatisfied response time of control and protection system, components obsolescence of those systems, and outstanding coercion of system modernization, nuclear society is striving to resolve this issue fundamentally. The reports and standards issued from IAEA and other standard organization like IBC is interested in the FPGA technology, which is fairly mature technology in other fields of industry. Intuitively it is replacing the high level of micro-processor type equipped with various software and hardware, which causes to accelerate the aging and obsolescence, and demands for system modernization in I and C system in Nuclear Power Plant. Thus utility has to spend much time and effort to upgrade I and C system throughout a decease. This paper summarizes the need of FPGA technology in Nuclear Power Plant, describing the characteristics of FPGA, test methodology and design requirements. Also the specific design and implementation experiences brought up in the course of FPGA-based controller, which has been conducted in KoRTS. The certification and verification and validation process to ensure the integrity of FPGA-based controller will be addressed. After that, Diverse Protection System (DPS) for YGN Unit 3 and 4 that is implemented via VHDL through SDLC is loaded on FPGA-based controller for run-time experimentations such as functionality, performance, integrity and reliability. Some of the test data is addressed in this paper

An FPGA-Based Massively Parallel Neuromorphic Cortex Simulator.

Science.gov (United States)

Wang, Runchun M; Thakur, Chetan S; van Schaik, André

2018-01-01

This paper presents a massively parallel and scalable neuromorphic cortex simulator designed for simulating large and structurally connected spiking neural networks, such as complex models of various areas of the cortex. The main novelty of this work is the abstraction of a neuromorphic architecture into clusters represented by minicolumns and hypercolumns, analogously to the fundamental structural units observed in neurobiology. Without this approach, simulating large-scale fully connected networks needs prohibitively large memory to store look-up tables for point-to-point connections. Instead, we use a novel architecture, based on the structural connectivity in the neocortex, such that all the required parameters and connections can be stored in on-chip memory. The cortex simulator can be easily reconfigured for simulating different neural networks without any change in hardware structure by programming the memory. A hierarchical communication scheme allows one neuron to have a fan-out of up to 200 k neurons. As a proof-of-concept, an implementation on one Altera Stratix V FPGA was able to simulate 20 million to 2.6 billion leaky-integrate-and-fire (LIF) neurons in real time. We verified the system by emulating a simplified auditory cortex (with 100 million neurons). This cortex simulator achieved a low power dissipation of 1.62 μW per neuron. With the advent of commercially available FPGA boards, our system offers an accessible and scalable tool for the design, real-time simulation, and analysis of large-scale spiking neural networks.

An FPGA-Based Massively Parallel Neuromorphic Cortex Simulator

Directory of Open Access Journals (Sweden)

Runchun M. Wang

2018-04-01

Full Text Available This paper presents a massively parallel and scalable neuromorphic cortex simulator designed for simulating large and structurally connected spiking neural networks, such as complex models of various areas of the cortex. The main novelty of this work is the abstraction of a neuromorphic architecture into clusters represented by minicolumns and hypercolumns, analogously to the fundamental structural units observed in neurobiology. Without this approach, simulating large-scale fully connected networks needs prohibitively large memory to store look-up tables for point-to-point connections. Instead, we use a novel architecture, based on the structural connectivity in the neocortex, such that all the required parameters and connections can be stored in on-chip memory. The cortex simulator can be easily reconfigured for simulating different neural networks without any change in hardware structure by programming the memory. A hierarchical communication scheme allows one neuron to have a fan-out of up to 200 k neurons. As a proof-of-concept, an implementation on one Altera Stratix V FPGA was able to simulate 20 million to 2.6 billion leaky-integrate-and-fire (LIF neurons in real time. We verified the system by emulating a simplified auditory cortex (with 100 million neurons. This cortex simulator achieved a low power dissipation of 1.62 μW per neuron. With the advent of commercially available FPGA boards, our system offers an accessible and scalable tool for the design, real-time simulation, and analysis of large-scale spiking neural networks.

FPGA-Based Embedded Motion Estimation Sensor

Directory of Open Access Journals (Sweden)

Zhaoyi Wei

2008-01-01

Full Text Available Accurate real-time motion estimation is very critical to many computer vision tasks. However, because of its computational power and processing speed requirements, it is rarely used for real-time applications, especially for micro unmanned vehicles. In our previous work, a FPGA system was built to process optical flow vectors of 64 frames of 640×480 image per second. Compared to software-based algorithms, this system achieved much higher frame rate but marginal accuracy. In this paper, a more accurate optical flow algorithm is proposed. Temporal smoothing is incorporated in the hardware structure which significantly improves the algorithm accuracy. To accommodate temporal smoothing, the hardware structure is composed of two parts: the derivative (DER module produces intermediate results and the optical flow computation (OFC module calculates the final optical flow vectors. Software running on a built-in processor on the FPGA chip is used in the design to direct the data flow and manage hardware components. This new design has been implemented on a compact, low power, high performance hardware platform for micro UV applications. It is able to process 15 frames of 640×480 image per second and with much improved accuracy. Higher frame rate can be achieved with further optimization and additional memory space.

FPGA based algorithms for data reduction at Belle II

Energy Technology Data Exchange (ETDEWEB)

Muenchow, David; Gessler, Thomas; Kuehn, Wolfgang; Lange, Jens Soeren; Liu, Ming; Spruck, Bjoern [II. Physikalisches Institut, Universitaet Giessen (Germany)

2011-07-01

Belle II, the upgrade of the existing Belle experiment at Super-KEKB in Tsukuba, Japan, is an asymmetric e{sup +}e{sup -} collider with a design luminosity of 8.10{sup 35}cm{sup -2}s{sup -1}. At Belle II the estimated event rate is {<=}30 kHz. The resulting data rate at the Pixel Detector (PXD) will be {<=}7.2 GB/s. This data rate needs to be reduced to be able to process and store the data. A region of interest (ROI) selection is based upon two mechanisms. a.) a tracklet finder using the silicon strip detector and b.) the HLT using all other Belle II subdetectors. These ROIs and the pixel data are forwarded to an FPGA based Compute Node for processing. Here a VHDL based algorithm on FPGA with the benefit of pipelining and parallelisation will be implemented. For a fast data handling we developed a dedicated memory management system for buffering and storing the data. The status of the implementation and performance tests of the memory manager and data reduction algorithm is presented.

Fpga based L-band pulse doppler radar design and implementation

Science.gov (United States)

Savci, Kubilay

As its name implies RADAR (Radio Detection and Ranging) is an electromagnetic sensor used for detection and locating targets from their return signals. Radar systems propagate electromagnetic energy, from the antenna which is in part intercepted by an object. Objects reradiate a portion of energy which is captured by the radar receiver. The received signal is then processed for information extraction. Radar systems are widely used for surveillance, air security, navigation, weather hazard detection, as well as remote sensing applications. In this work, an FPGA based L-band Pulse Doppler radar prototype, which is used for target detection, localization and velocity calculation has been built and a general-purpose Pulse Doppler radar processor has been developed. This radar is a ground based stationary monopulse radar, which transmits a short pulse with a certain pulse repetition frequency (PRF). Return signals from the target are processed and information about their location and velocity is extracted. Discrete components are used for the transmitter and receiver chain. The hardware solution is based on Xilinx Virtex-6 ML605 FPGA board, responsible for the control of the radar system and the digital signal processing of the received signal, which involves Constant False Alarm Rate (CFAR) detection and Pulse Doppler processing. The algorithm is implemented in MATLAB/SIMULINK using the Xilinx System Generator for DSP tool. The field programmable gate arrays (FPGA) implementation of the radar system provides the flexibility of changing parameters such as the PRF and pulse length therefore it can be used with different radar configurations as well. A VHDL design has been developed for 1Gbit Ethernet connection to transfer digitized return signal and detection results to PC. An A-Scope software has been developed with C# programming language to display time domain radar signals and detection results on PC. Data are processed both in FPGA chip and on PC. FPGA uses fixed

Advanced Image Processing Package for FPGA-Based Re-Programmable Miniature Electronics

National Research Council Canada - National Science Library

Ovod, Vladimir I; Baxter, Christopher R; Massie, Mark A; McCarley, Paul L

2005-01-01

.... An advanced image-processing package has been designed at Nova Sensors to re-configure the FPGA-based co-processor board for numerous applications including motion detection, optical background...

Prototyping Advanced Control Systems on FPGA

Directory of Open Access Journals (Sweden)

Simard Stéphane

2009-01-01

Full Text Available In advanced digital control and mechatronics, FPGA-based systems on a chip (SoCs promise to supplant older technologies, such as microcontrollers and DSPs. However, the tackling of FPGA technology by control specialists is complicated by the need for skilled hardware/software partitioning and design in order to match the performance requirements of more and more complex algorithms while minimizing cost. Currently, without adequate software support to provide a straightforward design flow, the amount of time and efforts required is prohibitive. In this paper, we discuss our choice, adaptation, and use of a rapid prototyping platform and design flow suitable for the design of on-chip motion controllers and other SoCs with a need for analog interfacing. The platform consists of a customized FPGA design for the Amirix AP1000 PCI FPGA board coupled with a multichannel analog I/O daughter card. The design flow uses Xilinx System Generator in Matlab/Simulink for system design and test, and Xilinx Platform Studio for SoC integration. This approach has been applied to the analysis, design, and hardware implementation of a vector controller for 3-phase AC induction motors. It also has contributed to the development of CMC's MEMS prototyping platform, now used by several Canadian laboratories.

A Signature-Based Power Model for MPSoC on FPGA

Directory of Open Access Journals (Sweden)

Roberta Piscitelli

2012-01-01

Full Text Available This paper presents a framework for high-level power estimation of multiprocessor systems-on-chip (MPSoC architectures on FPGA. The technique is based on abstract execution profiles, called event signatures, and it operates at a higher level of abstraction than, for example, commonly used instruction-set simulator (ISS-based power estimation methods and should thus be capable of achieving good evaluation performance. As a consequence, the technique can be very useful in the context of early system-level design space exploration. We integrated the power estimation technique in a system-level MPSoC synthesis framework. Subsequently, using this framework, we designed a range of different candidate architectures which contain different numbers of MicroBlaze processors and compared our power estimation results to those from real measurements on a Virtex-6 FPGA board.

Design of optical axis jitter control system for multi beam lasers based on FPGA

Science.gov (United States)

Ou, Long; Li, Guohui; Xie, Chuanlin; Zhou, Zhiqiang

2018-02-01

A design of optical axis closed-loop control system for multi beam lasers coherent combining based on FPGA was introduced. The system uses piezoelectric ceramics Fast Steering Mirrors (FSM) as actuator, the Fairfield spot detection of multi beam lasers by the high speed CMOS camera for optical detecting, a control system based on FPGA for real-time optical axis jitter suppression. The algorithm for optical axis centroid detecting and PID of anti-Integral saturation were realized by FPGA. Optimize the structure of logic circuit by reuse resource and pipeline, as a result of reducing logic resource but reduced the delay time, and the closed-loop bandwidth increases to 100Hz. The jitter of laser less than 40Hz was reduced 40dB. The cost of the system is low but it works stably.

Remote monitoring and fault recovery for FPGA-based field controllers of telescope and instruments

Science.gov (United States)

Zhu, Yuhua; Zhu, Dan; Wang, Jianing

2012-09-01

As the increasing size and more and more functions, modern telescopes have widely used the control architecture, i.e. central control unit plus field controller. FPGA-based field controller has the advantages of field programmable, which provide a great convenience for modifying software and hardware of control system. It also gives a good platform for implementation of the new control scheme. Because of multi-controlled nodes and poor working environment in scattered locations, reliability and stability of the field controller should be fully concerned. This paper mainly describes how we use the FPGA-based field controller and Ethernet remote to construct monitoring system with multi-nodes. When failure appearing, the new FPGA chip does self-recovery first in accordance with prerecovery strategies. In case of accident, remote reconstruction for the field controller can be done through network intervention if the chip is not being restored. This paper also introduces the network remote reconstruction solutions of controller, the system structure and transport protocol as well as the implementation methods. The idea of hardware and software design is given based on the FPGA. After actual operation on the large telescopes, desired results have been achieved. The improvement increases system reliability and reduces workload of maintenance, showing good application and popularization.

V&V Plan for FPGA-based ESF-CCS Using System Engineering Approach.

Science.gov (United States)

Maerani, Restu; Mayaka, Joyce; El Akrat, Mohamed; Cheon, Jung Jae

2018-02-01

Instrumentation and Control (I&C) systems play an important role in maintaining the safety of Nuclear Power Plant (NPP) operation. However, most current I&C safety systems are based on Programmable Logic Controller (PLC) hardware, which is difficult to verify and validate, and is susceptible to software common cause failure. Therefore, a plan for the replacement of the PLC-based safety systems, such as the Engineered Safety Feature - Component Control System (ESF-CCS), with Field Programmable Gate Arrays (FPGA) is needed. By using a systems engineering approach, which ensures traceability in every phase of the life cycle, from system requirements, design implementation to verification and validation, the system development is guaranteed to be in line with the regulatory requirements. The Verification process will ensure that the customer and stakeholder’s needs are satisfied in a high quality, trustworthy, cost efficient and schedule compliant manner throughout a system’s entire life cycle. The benefit of the V&V plan is to ensure that the FPGA based ESF-CCS is correctly built, and to ensure that the measurement of performance indicators has positive feedback that “do we do the right thing” during the re-engineering process of the FPGA based ESF-CCS.

40-Gbps optical backbone network deep packet inspection based on FPGA

Science.gov (United States)

Zuo, Yuan; Huang, Zhiping; Su, Shaojing

2014-11-01

In the era of information, the big data, which contains huge information, brings about some problems, such as high speed transmission, storage and real-time analysis and process. As the important media for data transmission, the Internet is the significant part for big data processing research. With the large-scale usage of the Internet, the data streaming of network is increasing rapidly. The speed level in the main fiber optic communication of the present has reached 40Gbps, even 100Gbps, therefore data on the optical backbone network shows some features of massive data. Generally, data services are provided via IP packets on the optical backbone network, which is constituted with SDH (Synchronous Digital Hierarchy). Hence this method that IP packets are directly mapped into SDH payload is named POS (Packet over SDH) technology. Aiming at the problems of real time process of high speed massive data, this paper designs a process system platform based on ATCA for 40Gbps POS signal data stream recognition and packet content capture, which employs the FPGA as the CPU. This platform offers pre-processing of clustering algorithms, service traffic identification and data mining for the following big data storage and analysis with high efficiency. Also, the operational procedure is proposed in this paper. Four channels of 10Gbps POS signal decomposed by the analysis module, which chooses FPGA as the kernel, are inputted to the flow classification module and the pattern matching component based on TCAM. Based on the properties of the length of payload and net flows, buffer management is added to the platform to keep the key flow information. According to data stream analysis, DPI (deep packet inspection) and flow balance distribute, the signal is transmitted to the backend machine through the giga Ethernet ports on back board. Practice shows that the proposed platform is superior to the traditional applications based on ASIC and NP.

Embedded algorithms within an FPGA-based system to process nonlinear time series data

Science.gov (United States)

Jones, Jonathan D.; Pei, Jin-Song; Tull, Monte P.

2008-03-01

This paper presents some preliminary results of an ongoing project. A pattern classification algorithm is being developed and embedded into a Field-Programmable Gate Array (FPGA) and microprocessor-based data processing core in this project. The goal is to enable and optimize the functionality of onboard data processing of nonlinear, nonstationary data for smart wireless sensing in structural health monitoring. Compared with traditional microprocessor-based systems, fast growing FPGA technology offers a more powerful, efficient, and flexible hardware platform including on-site (field-programmable) reconfiguration capability of hardware. An existing nonlinear identification algorithm is used as the baseline in this study. The implementation within a hardware-based system is presented in this paper, detailing the design requirements, validation, tradeoffs, optimization, and challenges in embedding this algorithm. An off-the-shelf high-level abstraction tool along with the Matlab/Simulink environment is utilized to program the FPGA, rather than coding the hardware description language (HDL) manually. The implementation is validated by comparing the simulation results with those from Matlab. In particular, the Hilbert Transform is embedded into the FPGA hardware and applied to the baseline algorithm as the centerpiece in processing nonlinear time histories and extracting instantaneous features of nonstationary dynamic data. The selection of proper numerical methods for the hardware execution of the selected identification algorithm and consideration of the fixed-point representation are elaborated. Other challenges include the issues of the timing in the hardware execution cycle of the design, resource consumption, approximation accuracy, and user flexibility of input data types limited by the simplicity of this preliminary design. Future work includes making an FPGA and microprocessor operate together to embed a further developed algorithm that yields better

High-definition video display based on the FPGA and THS8200

Science.gov (United States)

Qian, Jia; Sui, Xiubao

2014-11-01

This paper presents a high-definition video display solution based on the FPGA and THS8200. THS8200 is a video decoder chip launched by TI company, this chip has three 10-bit DAC channels which can capture video data in both 4:2:2 and 4:4:4 formats, and its data synchronization can be either through the dedicated synchronization signals HSYNC and VSYNC, or extracted from the embedded video stream synchronization information SAV / EAV code. In this paper, we will utilize the address and control signals generated by FPGA to access to the data-storage array, and then the FPGA generates the corresponding digital video signals YCbCr. These signals combined with the synchronization signals HSYNC and VSYNC that are also generated by the FPGA act as the input signals of THS8200. In order to meet the bandwidth requirements of the high-definition TV, we adopt video input in the 4:2:2 format over 2×10-bit interface. THS8200 is needed to be controlled by FPGA with I2C bus to set the internal registers, and as a result, it can generate the synchronous signal that is satisfied with the standard SMPTE and transfer the digital video signals YCbCr into analog video signals YPbPr. Hence, the composite analog output signals YPbPr are consist of image data signal and synchronous signal which are superimposed together inside the chip THS8200. The experimental research indicates that the method presented in this paper is a viable solution for high-definition video display, which conforms to the input requirements of the new high-definition display devices.

An FPGA-based torus communication network

Energy Technology Data Exchange (ETDEWEB)

Pivanti, Marcello; Schifano, Sebastiano Fabio [INFN, Ferrara (Italy); Ferrara Univ. (Italy); Simma, Hubert [DESY, Zeuthen (Germany). John von Neumann-Institut fuer Computing NIC

2011-02-15

We describe the design and FPGA implementation of a 3D torus network (TNW) to provide nearest-neighbor communications between commodity multi-core processors. The aim of this project is to build up tightly interconnected and scalable parallel systems for scientific computing. The design includes the VHDL code to implement on latest FPGA devices a network processor, which can be accessed by the CPU through a PCIe interface and which controls the external PHYs of the physical links. Moreover, a Linux driver and a library implementing custom communication APIs are provided. The TNW has been successfully integrated in two recent parallel machine projects, QPACE and AuroraScience. We describe some details of the porting of the TNW for the AuroraScience system and report performance results. (orig.)

An FPGA-based torus communication network

International Nuclear Information System (INIS)

Pivanti, Marcello; Schifano, Sebastiano Fabio; Simma, Hubert

2011-02-01

We describe the design and FPGA implementation of a 3D torus network (TNW) to provide nearest-neighbor communications between commodity multi-core processors. The aim of this project is to build up tightly interconnected and scalable parallel systems for scientific computing. The design includes the VHDL code to implement on latest FPGA devices a network processor, which can be accessed by the CPU through a PCIe interface and which controls the external PHYs of the physical links. Moreover, a Linux driver and a library implementing custom communication APIs are provided. The TNW has been successfully integrated in two recent parallel machine projects, QPACE and AuroraScience. We describe some details of the porting of the TNW for the AuroraScience system and report performance results. (orig.)

FPGA-based Upgrade to RITS-6 Control System, Designed with EMP Considerations

International Nuclear Information System (INIS)

Anderson, Harold D.; Williams, John T.

2009-01-01

The existing control system for the RITS-6, a 20-MA 3-MV pulsed-power accelerator located at Sandia National Laboratories, was built as a system of analog switches because the operators needed to be close enough to the machine to hear pulsed-power breakdowns, yet the electromagnetic pulse (EMP) emitted would disable any processor-based solutions. The resulting system requires operators to activate and deactivate a series of 110-V relays manually in a complex order. The machine is sensitive to both the order of operation and the time taken between steps. A mistake in either case would cause a misfire and possible machine damage. Based on these constraints, a field-programmable gate array (FPGA) was chosen as the core of a proposed upgrade to the control system. An FPGA is a series of logic elements connected during programming. Based on their connections, the elements can mimic primitive logic elements, a process called synthesis. The circuit is static; all paths exist simultaneously and do not depend on a processor. This should make it less sensitive to EMP. By shielding it and using good electromagnetic interference-reduction practices, it should continue to operate well in the electrically noisy environment. The FPGA has two advantages over the existing system. In manual operation mode, the synthesized logic gates keep the operators in sequence. In addition, a clock signal and synthesized countdown circuit provides an automated sequence, with adjustable delays, for quickly executing the time-critical portions of charging and firing. The FPGA is modeled as a set of states, each state being a unique set of values for the output signals. The state is determined by the input signals, and in the automated segment by the value of the synthesized countdown timer, with the default mode placing the system in a safe configuration. Unlike a processor-based system, any system stimulus that results in an abort situation immediately executes a shutdown, with only a tens

A novel FPGA-based bunch purity monitor system at the APS storage ring

International Nuclear Information System (INIS)

Norum, W.E.

2008-01-01

Bunch purity is an important source quality factor for the magnetic resonance experiments at the Advanced Photon Source. Conventional bunch-purity monitors utilizing time-to-amplitude converters are subject to dead time. We present a novel design based on a single field- programmable gate array (FPGA) that continuously processes pulses at the full speed of the detector and front-end electronics. The FPGA provides 7778 single-channel analyzers (six per rf bucket). The starting time and width of each single-channel analyzer window can be set to a resolution of 178 ps. A detector pulse arriving inside the window of a single-channel analyzer is recorded in an associated 32-bit counter. The analyzer makes no contribution to the system dead time. Two channels for each rf bucket count pulses originating from the electrons in the bucket. The other four channels on the early and late side of the bucket provide estimates of the background. A single-chip microcontroller attached to the FPGA acts as an EPICS IOC to make the information in the FPGA available to the EPICS clients.

HSTL IO Standard Based Energy Efficient Multiplier Design using Nikhilam Navatashcaramam Dashatah on 28nm FPGA

DEFF Research Database (Denmark)

Madhok, Shivani; Pandey, Bishwajeet; Kaur, Amanpreet

2015-01-01

standards. Frequency scaling is one of the best energy efficient techniques for FPGA based VLSI design and is used in this paper. At the end we can conclude that we can conclude that there is 23-40% saving of total power dissipation by using SSTL IO standard at 25 degree Celsius. The main reason for power...... consumption is leakage power at different IO Standards and at different frequencies. In this research work only FPGA work has been performed not ultra scale FPGA....

Real-time FPGA architectures for computer vision

Science.gov (United States)

Arias-Estrada, Miguel; Torres-Huitzil, Cesar

2000-03-01

This paper presents an architecture for real-time generic convolution of a mask and an image. The architecture is intended for fast low level image processing. The FPGA-based architecture takes advantage of the availability of registers in FPGAs to implement an efficient and compact module to process the convolutions. The architecture is designed to minimize the number of accesses to the image memory and is based on parallel modules with internal pipeline operation in order to improve its performance. The architecture is prototyped in a FPGA, but it can be implemented on a dedicated VLSI to reach higher clock frequencies. Complexity issues, FPGA resources utilization, FPGA limitations, and real time performance are discussed. Some results are presented and discussed.

Real-time distortion correction for visual inspection systems based on FPGA

Science.gov (United States)

Liang, Danhua; Zhang, Zhaoxia; Chen, Xiaodong; Yu, Daoyin

2008-03-01

Visual inspection is a kind of new technology based on the research of computer vision, which focuses on the measurement of the object's geometry and location. It can be widely used in online measurement, and other real-time measurement process. Because of the defects of the traditional visual inspection, a new visual detection mode -all-digital intelligent acquisition and transmission is presented. The image processing, including filtering, image compression, binarization, edge detection and distortion correction, can be completed in the programmable devices -FPGA. As the wide-field angle lens is adopted in the system, the output images have serious distortion. Limited by the calculating speed of computer, software can only correct the distortion of static images but not the distortion of dynamic images. To reach the real-time need, we design a distortion correction system based on FPGA. The method of hardware distortion correction is that the spatial correction data are calculated first under software circumstance, then converted into the address of hardware storage and stored in the hardware look-up table, through which data can be read out to correct gray level. The major benefit using FPGA is that the same circuit can be used for other circularly symmetric wide-angle lenses without being modified.

A signature-based power model for MPSoC on FPGA

NARCIS (Netherlands)

Piscitelli, R.; Pimentel, A.D.

2012-01-01

This paper presents a framework for high-level power estimation of multiprocessor systems-on-chip (MPSoC) architectures on FPGA. The technique is based on abstract execution profiles, called event signatures, and it operates at a higher level of abstraction than, for example, commonly used

Rapid and highly integrated FPGA-based Shack-Hartmann wavefront sensor for adaptive optics system

Science.gov (United States)

Chen, Yi-Pin; Chang, Chia-Yuan; Chen, Shean-Jen

2018-02-01

In this study, a field programmable gate array (FPGA)-based Shack-Hartmann wavefront sensor (SHWS) programmed on LabVIEW can be highly integrated into customized applications such as adaptive optics system (AOS) for performing real-time wavefront measurement. Further, a Camera Link frame grabber embedded with FPGA is adopted to enhance the sensor speed reacting to variation considering its advantage of the highest data transmission bandwidth. Instead of waiting for a frame image to be captured by the FPGA, the Shack-Hartmann algorithm are implemented in parallel processing blocks design and let the image data transmission synchronize with the wavefront reconstruction. On the other hand, we design a mechanism to control the deformable mirror in the same FPGA and verify the Shack-Hartmann sensor speed by controlling the frequency of the deformable mirror dynamic surface deformation. Currently, this FPGAbead SHWS design can achieve a 266 Hz cyclic speed limited by the camera frame rate as well as leaves 40% logic slices for additionally flexible design.

Architecture exploration of FPGA based accelerators for bioinformatics applications

CERN Document Server

Varma, B Sharat Chandra; Balakrishnan, M

2016-01-01

This book presents an evaluation methodology to design future FPGA fabrics incorporating hard embedded blocks (HEBs) to accelerate applications. This methodology will be useful for selection of blocks to be embedded into the fabric and for evaluating the performance gain that can be achieved by such an embedding. The authors illustrate the use of their methodology by studying the impact of HEBs on two important bioinformatics applications: protein docking and genome assembly. The book also explains how the respective HEBs are designed and how hardware implementation of the application is done using these HEBs. It shows that significant speedups can be achieved over pure software implementations by using such FPGA-based accelerators. The methodology presented in this book may also be used for designing HEBs for accelerating software implementations in other domains besides bioinformatics. This book will prove useful to students, researchers, and practicing engineers alike.

An efficient and cost effective FPGA based implementation of the Viola-Jones face detection algorithm

Directory of Open Access Journals (Sweden)

Peter Irgens

2017-04-01

Full Text Available We present an field programmable gate arrays (FPGA based implementation of the popular Viola-Jones face detection algorithm, which is an essential building block in many applications such as video surveillance and tracking. Our implementation is a complete system level hardware design described in a hardware description language and validated on the affordable DE2-115 evaluation board. Our primary objective is to study the achievable performance with a low-end FPGA chip based implementation. In addition, we release to the public domain the entire project. We hope that this will enable other researchers to easily replicate and compare their results to ours and that it will encourage and facilitate further research and educational ideas in the areas of image processing, computer vision, and advanced digital design and FPGA prototyping.

Irradiation test of FPGA for BES III

International Nuclear Information System (INIS)

Chen Yixin; Liang Hao; Xue Jundong; Liu Baoying; Liu Qiang; Yu Xiaoqi; Zhou Yongzhao; Hou Long

2005-01-01

The irradiation effect of FPGA, applied in Front-end Electronics for experiments of High-Energy Physics, is a serious problem. The performance of FPGA, used in the front-end card of Muon Counters of BES III project, needs to be evaluated under irradiation. SEUs on Altera ACEX 1K FPGA, observed in the experiment under the irradiation of γ ray, 14 and 2.5 MeV neutrons, was investigated. The authors calculated involved cross-section and provided reasonable analysis and evaluation for the result of the experiment. The conclusion about feasibility of applying ACEX 1K FPGA in the front-end card of the readout system of Muon Counters for BES III was given. (authors)

Design issues on using FPGA-based I and C systems in nuclear reactors

Energy Technology Data Exchange (ETDEWEB)

Farias, Marcos S.; Carvalho, Paulo Victor R. de; Santos, Isaac Jose A.L. dos; Lacerda, Fabio de, E-mail: msantana@ien.gov.br, E-mail: paulov@ien.gov.br, E-mail: luquetti@ien.gov.br, E-mail: acerda@ien.gov.br [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil). Div. de Engenharia Nuclear

2015-07-01

The FPGA (field programmable gate array) is widely used in various fields of industry. FPGAs can be used to perform functions that are safety critical and require high reliability, like in automobiles, aircraft control and assistance and mission-critical applications in the aerospace industry. With these merits, FPGAs are receiving increased attention worldwide for application in nuclear plant instrumentation and control (I and C) systems, mainly for Reactor Protection System (RPS). Reasons for this include the fact that conventional analog electronics technologies are become obsolete. I and C systems of new Reactors have been designed to adopt the digital equipment such as PLC (Programmable Logic Controller) and DCS (Distributed Control System). But microprocessors-based systems may not be simply qualified because of its complex characteristics. For example, microprocessor cores execute one instruction at a time, and an operating system is needed to manage the execution of programs. In turn, FPGAs can run without an operating system and the design architecture is inherently parallel. In this paper we aim to assess these and other advantages, and the limitations, on FPGA-based solutions, considering the design guidelines and regulations on the use of FPGAs in Nuclear Plant I and C Systems. We will also examine some circuit design techniques in FPGA to help mitigate failures and provide redundancy. The objective is to show how FPGA-based systems can provide cost-effective options for I and C systems in modernization projects and to the RMB (Brazilian Multipurpose Reactor), ensuring safe and reliable operation, meeting licensing requirements, such as separation, redundancy and diversity. (author)

The RTE inversion on FPGA aboard the solar orbiter PHI instrument

Science.gov (United States)

Cobos Carrascosa, J. P.; Aparicio del Moral, B.; Ramos Mas, J. L.; Balaguer, M.; López Jiménez, A. C.; del Toro Iniesta, J. C.

2016-07-01

In this work we propose a multiprocessor architecture to reach high performance in floating point operations by using radiation tolerant FPGA devices, and under narrow time and power constraints. This architecture is used in the PHI instrument that carries out the scientific analysis aboard the ESA's Solar Orbiter mission. The proposed architecture, in a SIMD flavor, is aimed to be an accelerator within the Data Processing Unit (it is composed by a main Leon processor and two FPGAs) for carrying out the RTE inversion on board the spacecraft using a relatively slow FPGA device - Xilinx XQR4VSX55-. The proposed architecture squeezes the FPGA resources in order to reach the computational requirements and improves the ground-based system performance based on commercial CPUs regarding time and power consumption. In this work we demonstrate the feasibility of using this FPGA devices embedded in the SO/PHI instrument. With that goal in mind, we perform tests to evaluate the scientific results and to measure the processing time and power consumption for carrying out the RTE inversion.

Adaptive Hardware Cryptography Engine Based on FPGA

International Nuclear Information System (INIS)

Afify, M.A.A.

2011-01-01

In the last two decades, with spread of the real time applications over public networks or communications the need for information security become more important but with very high speed for data processing, to keep up with the real time applications requirements, that is the reason for using FPGA as an implementation platform for the proposed cryptography engine. Hence in this thesis a new S-Box design has been demonstrated and implemented, there is a comparison for the simulation results for proposed S-Box simulation results with respect to different designs for S-Box in DES, Two fish and Rijndael algorithms and another comparison among proposed S-Box with different sizes. The proposed S-Box implemented with 32-bits Input data lines and compared with different designs in the encryption algorithms with the same input lines, the proposed S-Box gives implementation results for the maximum frequency 120 MHz but the DES S-Box gives 34 MHz and Rijndael gives 71 MHz, on the other hand the proposed design gives the best implementation area, hence it gives 50 Configurable logic Block CLB but DES gives 88 CLB. The proposed S-Box implemented in different sizes 64-bits, 128-bits, and 256-bits for input data lines. The implementation carried out by using UniDAq PCI card with FPGA Chip XCV 800, synthesizing carried out for all designs by using Leonardo spectrum and simulation carried out by using model sim simulator program form the FPGA advantage package. Finally the results evaluation and verifications carried out using the UniDAq FPGA PCI card with chip XCV 800. Different cases study have been implemented, data encryption, images encryption, voice encryption, and video encryption. A prototype for Remote Monitoring Control System has been implemented. Finally the proposed design for S-Box has a significant achievement in maximum frequency, implementation area, and encryption strength.

A low-cost, FPGA-based servo controller with lock-in amplifier

International Nuclear Information System (INIS)

Yang, G; Barry, J F; Shuman, E S; Steinecker, M H; DeMille, D

2012-01-01

We describe the design and implementation of a low-cost, FPGA-based servo controller with an integrated waveform synthesizer and lock-in amplifier. This system has been designed with the specific application of laser frequency locking in mind but should be adaptable to a variety of other purposes as well. The system incorporates an onboard waveform synthesizer, a lock-in amplifier, two channels of proportional-integral (PI) servo control, and a ramp generator on a single FPGA chip. The system is based on an inexpensive, off-the-shelf FPGA evaluation board with a wide variety of available accessories, allowing the system to interface with standard laser controllers and detectors while minimizing the use of custom hardware and electronics. Gains, filter constants, and other relevant parameters are adjustable via onboard knobs and switches. These parameters and other information are displayed to the user via an integrated LCD, allowing full operation of the device without an accompanying computer. We demonstrate the performance of the system in a test setup, in which the frequency of a tunable external-cavity diode laser (ECDL) is locked to a resonant optical transmission peak of a Fabry-Perot cavity. In this setup, we achieve a total servo-loop bandwidth of ∼ 7 kHz and achieve locking of the ECDL to the cavity with a full-width-at-half-maximum (FWHM) linewidth of ∼ 200 kHz.

Design of Power Efficient FPGA based Hardware Accelerators for Financial Applications

DEFF Research Database (Denmark)

Hegner, Jonas Stenbæk; Sindholt, Joakim; Nannarelli, Alberto

2012-01-01

Using Field Programmable Gate Arrays (FPGAs) to accelerate financial derivative calculations is becoming very common. In this work, we implement an FPGA-based specific processor for European option pricing using Monte Carlo simulations, and we compare its performance and power dissipation...

An SEU resistant 256K SOI SRAM

Science.gov (United States)

Hite, L. R.; Lu, H.; Houston, T. W.; Hurta, D. S.; Bailey, W. E.

1992-12-01

A novel SEU (single event upset) resistant SRAM (static random access memory) cell has been implemented in a 256K SOI (silicon on insulator) SRAM that has attractive performance characteristics over the military temperature range of -55 to +125 C. These include worst-case access time of 40 ns with an active power of only 150 mW at 25 MHz, and a worst-case minimum WRITE pulse width of 20 ns. Measured SEU performance gives an Adams 10 percent worst-case error rate of 3.4 x 10 exp -11 errors/bit-day using the CRUP code with a conservative first-upset LET threshold. Modeling does show that higher bipolar gain than that measured on a sample from the SRAM lot would produce a lower error rate. Measurements show the worst-case supply voltage for SEU to be 5.5 V. Analysis has shown this to be primarily caused by the drain voltage dependence of the beta of the SOI parasitic bipolar transistor. Based on this, SEU experiments with SOI devices should include measurements as a function of supply voltage, rather than the traditional 4.5 V, to determine the worst-case condition.

FPGA Implementation of the Coupled Filtering Method and the Affine Warping Method.

Science.gov (United States)

Zhang, Chen; Liang, Tianzhu; Mok, Philip K T; Yu, Weichuan

2017-07-01

In ultrasound image analysis, the speckle tracking methods are widely applied to study the elasticity of body tissue. However, "feature-motion decorrelation" still remains as a challenge for the speckle tracking methods. Recently, a coupled filtering method and an affine warping method were proposed to accurately estimate strain values, when the tissue deformation is large. The major drawback of these methods is the high computational complexity. Even the graphics processing unit (GPU)-based program requires a long time to finish the analysis. In this paper, we propose field-programmable gate array (FPGA)-based implementations of both methods for further acceleration. The capability of FPGAs on handling different image processing components in these methods is discussed. A fast and memory-saving image warping approach is proposed. The algorithms are reformulated to build a highly efficient pipeline on FPGA. The final implementations on a Xilinx Virtex-7 FPGA are at least 13 times faster than the GPU implementation on the NVIDIA graphic card (GeForce GTX 580).

FPGA remote update for nuclear environments

Energy Technology Data Exchange (ETDEWEB)

Fernandes, Ana; Pereira, Rita C.; Sousa, Jorge; Carvalho, Paulo F.; Correia, Miguel; Rodrigues, Antonio P.; Carvalho, Bernardo B.; Goncalves, Bruno [Instituto de Plasmasbe Fusao Nuclear, Instituto Superior Tecnico, Universidade de Lisboa, 1049-001 Lisboa, (Portugal); Correia, Carlos M.B.A. [Centro de Instrumentacao, Dept. de Fisica, Universidade de Coimbra, 3004-516 Coimbra, (Portugal)

2015-07-01

The Instituto de Plasmas e Fusao Nuclear (IPFN) has developed dedicated re-configurable modules based on field programmable gate array (FPGA) devices for several nuclear fusion machines worldwide. Moreover, new Advanced Telecommunication Computing Architecture (ATCA) based modules developed by IPFN are already included in the ITER catalogue. One of the requirements for re-configurable modules operating in future nuclear environments including ITER is the remote update capability. Accordingly, this work presents an alternative method for FPGA remote programing to be implemented in new ATCA based re-configurable modules. FPGAs are volatile devices and their programming code is usually stored in dedicated flash memories for properly configuration during module power-on. The presented method is capable to store new FPGA codes in Serial Peripheral Interface (SPI) flash memories using the PCIexpress (PCIe) network established on the ATCA back-plane, linking data acquisition endpoints and the data switch blades. The method is based on the Xilinx Quick Boot application note, adapted to PCIe protocol and ATCA based modules. (authors)

Semivariogram Analysis of Bone Images Implemented on FPGA Architectures.

Science.gov (United States)

Shirvaikar, Mukul; Lagadapati, Yamuna; Dong, Xuanliang

2017-03-01

Osteoporotic fractures are a major concern for the healthcare of elderly and female populations. Early diagnosis of patients with a high risk of osteoporotic fractures can be enhanced by introducing second-order statistical analysis of bone image data using techniques such as variogram analysis. Such analysis is computationally intensive thereby creating an impediment for introduction into imaging machines found in common clinical settings. This paper investigates the fast implementation of the semivariogram algorithm, which has been proven to be effective in modeling bone strength, and should be of interest to readers in the areas of computer-aided diagnosis and quantitative image analysis. The semivariogram is a statistical measure of the spatial distribution of data, and is based on Markov Random Fields (MRFs). Semivariogram analysis is a computationally intensive algorithm that has typically seen applications in the geosciences and remote sensing areas. Recently, applications in the area of medical imaging have been investigated, resulting in the need for efficient real time implementation of the algorithm. A semi-variance, γ ( h ), is defined as the half of the expected squared differences of pixel values between any two data locations with a lag distance of h . Due to the need to examine each pair of pixels in the image or sub-image being processed, the base algorithm complexity for an image window with n pixels is O ( n 2 ) Field Programmable Gate Arrays (FPGAs) are an attractive solution for such demanding applications due to their parallel processing capability. FPGAs also tend to operate at relatively modest clock rates measured in a few hundreds of megahertz. This paper presents a technique for the fast computation of the semivariogram using two custom FPGA architectures. A modular architecture approach is chosen to allow for replication of processing units. This allows for high throughput due to concurrent processing of pixel pairs. The current

Enabling Fast ASIP Design Space Exploration: An FPGA-Based Runtime Reconfigurable Prototyper

Directory of Open Access Journals (Sweden)

Paolo Meloni

2012-01-01

Full Text Available Application Specific Instruction-set Processors (ASIPs expose to the designer a large number of degrees of freedom. Accurate and rapid simulation tools are needed to explore the design space. To this aim, FPGA-based emulators have recently been proposed as an alternative to pure software cycle-accurate simulator. However, the advantages of on-hardware emulation are reduced by the overhead of the RTL synthesis process that needs to be run for each configuration to be emulated. The work presented in this paper aims at mitigating this overhead, exploiting a form of software-driven platform runtime reconfiguration. We present a complete emulation toolchain that, given a set of candidate ASIP configurations, identifies and builds an overdimensioned architecture capable of being reconfigured via software at runtime, emulating all the design space points under evaluation. The approach has been validated against two different case studies, a filtering kernel and an M-JPEG encoding kernel. Moreover, the presented emulation toolchain couples FPGA emulation with activity-based physical modeling to extract area and power/energy consumption figures. We show how the adoption of the presented toolchain reduces significantly the design space exploration time, while introducing an overhead lower than 10% for the FPGA resources and lower than 0.5% in terms of operating frequency.

Implementation of FPGA based PID Controller for DC Motor Speed Control System

Directory of Open Access Journals (Sweden)

Savita SONOLI

2010-03-01

Full Text Available In this paper, the implementation of software module using ‘VHDL’ for Xilinx FPGA (XC3S400 based PID controller for DC motor speed control system is presented. The tools used for building and testing the software modules are Xilinx ISE 9.2i and ModelSim XE III 6.3c. Before verifying the design on FPGA the complete design is simulated using Modelsim Simulation tool. A test bench is written where the set speed can be changed for the motor. It is observed that the motor speed gradually changes to the set speed and locks to the set speed.

Energy Efficient FPGA based Hardware Accelerators for Financial Applications

DEFF Research Database (Denmark)

Kenn Toft, Jakob; Nannarelli, Alberto

2014-01-01

Field Programmable Gate Arrays (FPGAs) based accelerators are very suitable to implement application-specific processors using uncommon operations or number systems. In this work, we design FPGA-based accelerators for two financial computations with different characteristics and we compare...... the accelerator performance and energy consumption to a software execution of the application. The experimental results show that significant speed-up and energy savings, can be obtained for large data sets by using the accelerator at expenses of a longer development time....

Research on acceleration method of reactor physics based on FPGA platforms

International Nuclear Information System (INIS)

Li, C.; Yu, G.; Wang, K.

2013-01-01

The physical designs of the new concept reactors which have complex structure, various materials and neutronic energy spectrum, have greatly improved the requirements to the calculation methods and the corresponding computing hardware. Along with the widely used parallel algorithm, heterogeneous platforms architecture has been introduced into numerical computations in reactor physics. Because of the natural parallel characteristics, the CPU-FPGA architecture is often used to accelerate numerical computation. This paper studies the application and features of this kind of heterogeneous platforms used in numerical calculation of reactor physics through practical examples. After the designed neutron diffusion module based on CPU-FPGA architecture achieves a 11.2 speed up factor, it is proved to be feasible to apply this kind of heterogeneous platform into reactor physics. (authors)

Heavy Ion SEU Cross Section Calculation Based on Proton Experimental Data, and Vice Versa

CERN Document Server

Wrobel, F; Pouget, V; Dilillo, L; Ecoffet, R; Lorfèvre, E; Bezerra, F; Brugger, M; Saigné, F

2014-01-01

The aim of this work is to provide a method to calculate single event upset (SEU) cross sections by using experimental data. Valuable tools such as PROFIT and SIMPA already focus on the calculation of the proton cross section by using heavy ions cross-section experiments. However, there is no available tool that calculates heavy ion cross sections based on measured proton cross sections with no knowledge of the technology. We based our approach on the diffusion-collection model with the aim of analyzing the characteristics of transient currents that trigger SEUs. We show that experimental cross sections could be used to characterize the pulses that trigger an SEU. Experimental results allow yet defining an empirical rule to identify the transient current that are responsible for an SEU. Then, the SEU cross section can be calculated for any kind of particle and any energy with no need to know the Spice model of the cell. We applied our method to some technologies (250 nm, 90 nm and 65 nm bulk SRAMs) and we sho...

Design of FPGA-based radiation tolerant quench detectors for LHC

Science.gov (United States)

Steckert, J.; Skoczen, A.

2017-04-01

The Large Hadron Collider (LHC) comprises many superconducting circuits. Most elements of these circuits require active protection. The functionality of the quench detectors was initially implemented as microcontroller based equipment. After the initial stage of the LHC operation with beams the introduction of a new type of quench detector began. This article presents briefly the main ideas and architectures applied to the design and the validation of FPGA-based quench detectors.

Design of FPGA-based radiation tolerant quench detectors for LHC

International Nuclear Information System (INIS)

Steckert, J.; Skoczen, A.

2017-01-01

The Large Hadron Collider (LHC) comprises many superconducting circuits. Most elements of these circuits require active protection. The functionality of the quench detectors was initially implemented as microcontroller based equipment. After the initial stage of the LHC operation with beams the introduction of a new type of quench detector began. This article presents briefly the main ideas and architectures applied to the design and the validation of FPGA-based quench detectors.

FPGA implementation of a hybrid on-line process monitoring in PC based real-time systems

Directory of Open Access Journals (Sweden)

Jovanović Bojan

2011-01-01

Full Text Available This paper presents one way of FPGA implementation of hybrid (hardware-software based on-line process monitoring in Real-Time systems (RTS. The reasons for RTS monitoring are presented at the beginning. The summary of different RTS monitoring approaches along with its advantages and drawbacks are also exposed. Finally, monitoring module is described in details. Also, FPGA implementation results and some useful monitoring system applications are mentioned.

FPGA design

CERN Document Server

Simpson, Philip

2010-01-01

This book describes best practices for successful FPGA design. It is the result of the author's meetings with hundreds of customers on the challenges facing each of their FPGA design teams. By gaining an understanding into their design environments, processes, what works and what does not work, key areas of concern in implementing system designs have been identified and a recommended design methodology to overcome these challenges has been developed. This book's content has a strong focus on design teams that are spread across sites. The goal being to increase the productivity of FPGA design t

An FPGA-Based Quench Detection and Protection System for Superconducting Accelerator Magnets

CERN Document Server

Carcagno, Ruben H; Lamm, Michael J; Makulski, Andrzej; Nehring, Roger; Orris, Darryl; Pishchalnikov, Yu M; Tartaglia, M

2005-01-01

A new quench detection and protection system for superconducting accelerator magnets was developed at the Fermilab's Magnet Test Facility (MTF). This system is based on a Field-Programmable Gate Array (FPGA) module, and it is made of mostly commerically available, integrated hardware and software components. It provides most of the functionality of our existing VME-based quench detection and protection system, but in addition the new system is easily scalable to protect multiple magnets powered independently and has a more powerful user interface and analysis tools. First applications of the new system will be for testing corrector coil packages. In this paper we describe the new system and present results of testing LHC Interaction Region Quadrupole (IRQ) correctors.

An FPGA-based quench detection and protection system for superconducting accelerator magnets

International Nuclear Information System (INIS)

Carcagno, R.H.; Feher, S.; Lamm, M.; Makulski, A.; Nehring, R.; Orris, D.F.; Pischalnikov, Y.; Tartaglia, M.; Fermilab

2005-01-01

A new quench detection and protection system for superconducting accelerator magnets was developed for the Fermilab's Magnet Test Facility (MTF). This system is based on a Field-Programmable Gate Array (FPGA) module, and it is made of mostly commercially available, integrated hardware and software components. It provides all the functions of our existing VME-based quench detection and protection system, but in addition the new system is easily scalable to protect multiple magnets powered independently and a more powerful user interface and analysis tools. The new system has been used successfully for testing LHC Interaction Region Quadrupoles correctors and High Field Magnet HFDM04. In this paper we describe the system and present results

An FPGA-based quench detection and protection system for superconducting accelerator magnets

Energy Technology Data Exchange (ETDEWEB)

Carcagno, R.H.; Feher, S.; Lamm, M.; Makulski, A.; Nehring, R.; Orris, D.F.; Pischalnikov, Y.; Tartaglia, M.; /Fermilab

2005-05-01

A new quench detection and protection system for superconducting accelerator magnets was developed for the Fermilab's Magnet Test Facility (MTF). This system is based on a Field-Programmable Gate Array (FPGA) module, and it is made of mostly commercially available, integrated hardware and software components. It provides all the functions of our existing VME-based quench detection and protection system, but in addition the new system is easily scalable to protect multiple magnets powered independently and a more powerful user interface and analysis tools. The new system has been used successfully for testing LHC Interaction Region Quadrupoles correctors and High Field Magnet HFDM04. In this paper we describe the system and present results.

Random number generators for large-scale parallel Monte Carlo simulations on FPGA

Science.gov (United States)

Lin, Y.; Wang, F.; Liu, B.

2018-05-01

Through parallelization, field programmable gate array (FPGA) can achieve unprecedented speeds in large-scale parallel Monte Carlo (LPMC) simulations. FPGA presents both new constraints and new opportunities for the implementations of random number generators (RNGs), which are key elements of any Monte Carlo (MC) simulation system. Using empirical and application based tests, this study evaluates all of the four RNGs used in previous FPGA based MC studies and newly proposed FPGA implementations for two well-known high-quality RNGs that are suitable for LPMC studies on FPGA. One of the newly proposed FPGA implementations: a parallel version of additive lagged Fibonacci generator (Parallel ALFG) is found to be the best among the evaluated RNGs in fulfilling the needs of LPMC simulations on FPGA.

Using Partial Reconfiguration and Message Passing to Enable FPGA-Based Generic Computing Platforms

Directory of Open Access Journals (Sweden)

Manuel Saldaña

2012-01-01

Full Text Available Partial reconfiguration (PR is an FPGA feature that allows the modification of certain parts of an FPGA while the rest of the system continues to operate without disruption. This distinctive characteristic of FPGAs has many potential benefits but also challenges. The lack of good CAD tools and the deep hardware knowledge requirement result in a hard-to-use feature. In this paper, the new partition-based Xilinx PR flow is used to incorporate PR within our MPI-based message-passing framework to allow hardware designers to create template bitstreams, which are predesigned, prerouted, generic bitstreams that can be reused for multiple applications. As an example of the generality of this approach, four different applications that use the same template bitstream are run consecutively, with a PR operation performed at the beginning of each application to instantiate the desired application engine. We demonstrate a simplified, reusable, high-level, and portable PR interface for X86-FPGA hybrid machines. PR issues such as local resets of reconfigurable modules and context saving and restoring are addressed in this paper followed by some examples and preliminary PR overhead measurements.

FPGA based compute nodes for high level triggering in PANDA

International Nuclear Information System (INIS)

Kuehn, W; Gilardi, C; Kirschner, D; Lang, J; Lange, S; Liu, M; Perez, T; Yang, S; Schmitt, L; Jin, D; Li, L; Liu, Z; Lu, Y; Wang, Q; Wei, S; Xu, H; Zhao, D; Korcyl, K; Otwinowski, J T; Salabura, P

2008-01-01

PANDA is a new universal detector for antiproton physics at the HESR facility at FAIR/GSI. The PANDA data acquisition system has to handle interaction rates of the order of 10 7 /s and data rates of several 100 Gb/s. FPGA based compute nodes with multi-Gb/s bandwidth capability using the ATCA architecture are designed to handle tasks such as event building, feature extraction and high level trigger processing. Data connectivity is provided via optical links as well as multiple Gb Ethernet ports. The boards will support trigger algorithms such us pattern recognition for RICH detectors, EM shower analysis, fast tracking algorithms and global event characterization. Besides VHDL, high level C-like hardware description languages will be considered to implement the firmware

An Intelligent FPGA Based Anti-Sweating System for Bed Sore Prevention in a Clinical Environment

Directory of Open Access Journals (Sweden)

K. S. Jaichandar

2011-01-01

Full Text Available Bed sores, a common problem among immobile patients occur as a result of continuous sweating due to increase in skin to bed surface temperature in patients lying on same posture for prolonged period. If left untreated, the skin can break open and become infected. Currently adopted methods for bed sores prevention include: use of two hourly flip chat for repositioning patient or use of air fluidized beds. However, the setbacks of these preventive measures include either use of costly equipment or wastage of human resources. This paper introduces an intelligent low cost FPGA based anti-sweating system for bed sores prevention in a clinical environment. The developed system consists of bed surface implanted temperature sensors interfaced with an FPGA chip for sensing the temperature change in patient’s skin to bed surface. Based on the temperature change, the FPGA chip select the - mode (heater/cooler and speed of the fan module. Furthermore, an alarm module was implemented to alert the nurse to reposition the patient only if patient’s skin to bed surface temperature exceeds a predefined threshold thereby saving human resources. By integrating the whole system into a single FPGA chip, we were able to build a low cost compact system without sacrificing processing power and flexibility.

Computer vision camera with embedded FPGA processing

Science.gov (United States)

Lecerf, Antoine; Ouellet, Denis; Arias-Estrada, Miguel

2000-03-01

Traditional computer vision is based on a camera-computer system in which the image understanding algorithms are embedded in the computer. To circumvent the computational load of vision algorithms, low-level processing and imaging hardware can be integrated in a single compact module where a dedicated architecture is implemented. This paper presents a Computer Vision Camera based on an open architecture implemented in an FPGA. The system is targeted to real-time computer vision tasks where low level processing and feature extraction tasks can be implemented in the FPGA device. The camera integrates a CMOS image sensor, an FPGA device, two memory banks, and an embedded PC for communication and control tasks. The FPGA device is a medium size one equivalent to 25,000 logic gates. The device is connected to two high speed memory banks, an IS interface, and an imager interface. The camera can be accessed for architecture programming, data transfer, and control through an Ethernet link from a remote computer. A hardware architecture can be defined in a Hardware Description Language (like VHDL), simulated and synthesized into digital structures that can be programmed into the FPGA and tested on the camera. The architecture of a classical multi-scale edge detection algorithm based on a Laplacian of Gaussian convolution has been developed to show the capabilities of the system.

Study on Method of Ultrasonic Gas Temperature Measure Based on FPGA

Energy Technology Data Exchange (ETDEWEB)

Wen, S H; Xu, F R [Institute of Electrical Engineering, Yanshan University, Qinhuangdao, 066004 (China)

2006-10-15

It is always a problem to measure instantaneous temperature of high-temperature and high-pressure gas. There is difficulty for the conventional method of measuring temperature to measure quickly and exactly, and the measuring precision is low, the ability of anti-jamming is bad, etc. So the article introduces a method of measuring burning gas temperature using ultrasonic based on Field-Programmable Gate Array (FPGA). The mathematic model of measuring temperature is built with the relation of velocity of ultrasonic transmitting and gas Kelvin in the ideal gas. The temperature can be figured out by measuring the difference of ultrasonic frequency {delta}f. FPGA is introduced and a high-precision data acquisition system based on digital phase-shift technology is designed. The feasibility of proposed above is confirmed more by measuring pressure of burning gas timely. Experimental result demonstrates that the error is less than 12.. and the precision is heightened to 0.8%.

FPGA Acceleration by Dynamically-Loaded Hardware Libraries

DEFF Research Database (Denmark)

Lomuscio, Andrea; Nannarelli, Alberto; Re, Marco

-the-y the speciffic processor in the FPGA, and we transfer the execution from the CPU to the FPGA-based accelerator. Results show that significant speed-up and energy efficiency can be obtained by HLL acceleration on system-on-chips where reconfigurable fabric is placed next to the CPUs....

Moessbauer spectrometric data acquisition based on FPGA

International Nuclear Information System (INIS)

Zhang Yuan; Li Shimin; Chen Nan; Zhu Jingbo; Xia Yuanfu

2008-01-01

FPGA(Field Programmable Gate Array) is a programmable device with strong logical function and timing control ability. It is extremely potent in acquiring and processing timing signals. By replacing the traditional used SCM (Single-Chip Microcomputer) with FPGA, counting speed of Moessbauer spectrometric data acquisition can be improved markedly with significantly decreased size of the spectrometer. The counter, RAM and RS-232 communication of the module are developed on Altera Cyclone series chip EP1C6T144C8 with Quartus II. EP1C6T144C8 has 5980 logical units accompanied by 92160 bits of memory space. It is so powerful that all needs in data acquisition of the Moessbauer spectrometer can be perfectly satisfied while allowing modifications in functions and parameters. (authors)

Development of an FPGA-Based Motion Control IC for Caving Machine

Directory of Open Access Journals (Sweden)

Chiu-Keng Lai

2014-03-01

Full Text Available Since the Field Programmable Gate Arrays (FPGAs with high density are available nowadays, systems with complex functions can thus be realized by FPGA in a single chip while they are traditionally implemented by several individual chips. In this research, the control of stepping motor drives as well as motion controller is integrated and implemented on Altera Cyclone III FPGA; the resulting system is evaluated by applying it to a 3-axis caving machine which is driven by stepping motors. Finally, the experimental results of current regulation and motion control integrated in FPGA IC are shown to prove the validness.

A digital frequency stabilization system of external cavity diode laser based on LabVIEW FPGA

Science.gov (United States)

Liu, Zhuohuan; Hu, Zhaohui; Qi, Lu; Wang, Tao

2015-10-01

Frequency stabilization for external cavity diode laser has played an important role in physics research. Many laser frequency locking solutions have been proposed by researchers. Traditionally, the locking process was accomplished by analog system, which has fast feedback control response speed. However, analog system is susceptible to the effects of environment. In order to improve the automation level and reliability of the frequency stabilization system, we take a grating-feedback external cavity diode laser as the laser source and set up a digital frequency stabilization system based on National Instrument's FPGA (NI FPGA). The system consists of a saturated absorption frequency stabilization of beam path, a differential photoelectric detector, a NI FPGA board and a host computer. Many functions, such as piezoelectric transducer (PZT) sweeping, atomic saturation absorption signal acquisition, signal peak identification, error signal obtaining and laser PZT voltage feedback controlling, are totally completed by LabVIEW FPGA program. Compared with the analog system, the system built by the logic gate circuits, performs stable and reliable. User interface programmed by LabVIEW is friendly. Besides, benefited from the characteristics of reconfiguration, the LabVIEW program is good at transplanting in other NI FPGA boards. Most of all, the system periodically checks the error signal. Once the abnormal error signal is detected, FPGA will restart frequency stabilization process without manual control. Through detecting the fluctuation of error signal of the atomic saturation absorption spectrum line in the frequency locking state, we can infer that the laser frequency stability can reach 1MHz.

Logic synthesis for FPGA-based finite state machines

CERN Document Server

Barkalov, Alexander; Kolopienczyk, Malgorzata; Mielcarek, Kamil; Bazydlo, Grzegorz

2016-01-01

This book discusses control units represented by the model of a finite state machine (FSM). It contains various original methods and takes into account the peculiarities of field-programmable gate arrays (FPGA) chips and a FSM model. It shows that one of the peculiarities of FPGA chips is the existence of embedded memory blocks (EMB). The book is devoted to the solution of problems of logic synthesis and reduction of hardware amount in control units. The book will be interesting and useful for researchers and PhD students in the area of Electrical Engineering and Computer Science, as well as for designers of modern digital systems.

A Hardware Framework for on-Chip FPGA Acceleration

DEFF Research Database (Denmark)

Lomuscio, Andrea; Cardarilli, Gian Carlo; Nannarelli, Alberto

2016-01-01

In this work, we present a new framework to dynamically load hardware accelerators on reconfigurable platforms (FPGAs). Provided a library of application-specific processors, we load on-the-fly the specific processor in the FPGA, and we transfer the execution from the CPU to the FPGA-based accele......In this work, we present a new framework to dynamically load hardware accelerators on reconfigurable platforms (FPGAs). Provided a library of application-specific processors, we load on-the-fly the specific processor in the FPGA, and we transfer the execution from the CPU to the FPGA......-based accelerator. Results show that significant speed-up can be obtained by the proposed acceleration framework on system-on-chips where reconfigurable fabric is placed next to the CPUs. The speed-up is due to both the intrinsic acceleration in the application-specific processors, and to the increased parallelism....

Embedded active vision system based on an FPGA architecture

OpenAIRE

Chalimbaud , Pierre; Berry , François

2006-01-01

International audience; In computer vision and more particularly in vision processing, the impressive evolution of algorithms and the emergence of new techniques dramatically increase algorithm complexity. In this paper, a novel FPGA-based architecture dedicated to active vision (and more precisely early vision) is proposed. Active vision appears as an alternative approach to deal with artificial vision problems. The central idea is to take into account the perceptual aspects of visual tasks,...

FPGA programming using FX3

CERN Document Server

Calleja, Stefano

2014-01-01

An FPGA is required to be programmed via USB3 cable. Connectivity to the host PC is achieved by using an FX3 chip. By changing the firmware of the FX3, one can alter the function of the FX3. To program the FPGA via USB3, the FX3 must act as a connector from the host to the FPGA. This type of connection is known as an FPGA link. This method of connection is required to avoid programming the FPGA and FX3 dedicated memories and thus not having to use different programming methods and cables to program the board. It is considered that the FX3 is suitable to be used as an FPGA link since its previous version, the FX2, was also used as an FPGA link in a similar project. Firmware was downloaded on the FX3 using libusb and fx3load files from a Linux terminal. Some testing firmware was verified to perform as intended. However, the connection firmware intended to make the FPGA link truly functional has not been successful so far. Yet, through the FX3 documentation, it can be noted that an FPGA link is possible. UrJTAG ...

NASA Electronic Parts and Packaging (NEPP) Field Programmable Gate Array (FPGA) Single Event Effects (SEE) Test Guideline Update

Science.gov (United States)

Berg, Melanie D.; LaBel, Kenneth A.

2018-01-01

The following are updated or new subjects added to the FPGA SEE Test Guidelines manual: academic versus mission specific device evaluation, single event latch-up (SEL) test and analysis, SEE response visibility enhancement during radiation testing, mitigation evaluation (embedded and user-implemented), unreliable design and its affects to SEE Data, testing flushable architectures versus non-flushable architectures, intellectual property core (IP Core) test and evaluation (addresses embedded and user-inserted), heavy-ion energy and linear energy transfer (LET) selection, proton versus heavy-ion testing, fault injection, mean fluence to failure analysis, and mission specific system-level single event upset (SEU) response prediction. Most sections within the guidelines manual provide information regarding best practices for test structure and test system development. The scope of this manual addresses academic versus mission specific device evaluation and visibility enhancement in IP Core testing.

Hamming Weight Counters and Comparators based on Embedded DSP Blocks for Implementation in FPGA

Directory of Open Access Journals (Sweden)

SKLYAROV, V.

2014-05-01

Full Text Available This paper is dedicated to the design, implementation and evaluation of fast FPGA-based circuits that compute Hamming weights for binary vectors and compare the results with fixed thresholds and variable bounds. It is shown that digital signal processing (DSP slices that are widely available in contemporary FPGAs may be used efficiently and they frequently provide the fastest and least resource consuming solutions. A thorough analysis and comparison of these with the best known alternatives both in hardware and in software is presented. The results are supported by numerous experiments in recent prototyping boards. A fully synthesizable hardware description language (VHDL specification for one of the proposed core components is given that is ready to be synthesized, implemented, tested and compared in any FPGA that contains embedded DSP48E1 slices (or alternatively DSP48A1 slices from previous generations. Finally, the results of comparisons are provided that include discussions of designs in an ARM processor combined with reconfigurable logic for very long vectors.

Design and development of FPGA based TCP/IP module for real time computers in nuclear power plants

International Nuclear Information System (INIS)

Balasri, G. Janani; Santhana Raj, A.; Gour, Aditya; Murali, N.; Manikandan, J.

2013-01-01

An VME (Virtual Module Europa) bus based Real Time Computer's (RTC's) are being developed for Prototype Fast Breeder Reactor (PFBR) which is in an advanced stage of construction at Kalpakkam, where the RTC's have to communicate to the central process computer on the data collected from the field instrument and receive data from the central process computer. A Distributed Digital Control System (DDSC) architecture has been designed for this communication which is based on Transfer Communication Protocol/Internet Protocol (TCP/IP) over Ethernet. Currently the RTC's uses 'Wiznet Module', a bought out chip which implements the TCP/IP stack in hardware. This project concentrates on the design and development of Field Programmable Gate Array (FPGA) based TCP/IP module that runs on Microblaze, a 32-bit softcore processor, to take care of the communication as that of Wiznet module. Advantage of switching over to FPGA based system are its reconfigurability, desired number of sockets, and the design is stable even if the FPGA's get obsolete. (author)

FPGA-based digital convolution for wireless applications

CERN Document Server

Guan, Lei

2017-01-01

This book presents essential perspectives on digital convolutions in wireless communications systems and illustrates their corresponding efficient real-time field-programmable gate array (FPGA) implementations. Covering these digital convolutions from basic concept to vivid simulation/illustration, the book is also supplemented with MS PowerPoint presentations to aid in comprehension. FPGAs or generic all programmable devices will soon become widespread, serving as the “brains” of all types of real-time smart signal processing systems, like smart networks, smart homes and smart cities. The book examines digital convolution by bringing together the following main elements: the fundamental theory behind the mathematical formulae together with corresponding physical phenomena; virtualized algorithm simulation together with benchmark real-time FPGA implementations; and detailed, state-of-the-art case studies on wireless applications, including popular linear convolution in digital front ends (DFEs); nonlinear...

Carry-chain propagation delay impacts on resolution of FPGA-based TDC

International Nuclear Information System (INIS)

Dong Lei; Yang Junfeng; Song Kezhu

2014-01-01

The architecture of carry chains in Field-Programmable Gate Array (FPGA) is introduced in this paper. The propagation delay time of the rising and falling edges in the carry chains are calculated according to the architecture and they are predicted not equal in most cases. Tests show that the measuring results of the propagation delay time in EP3C120F484C8N series FPGA of Altera are in line with the inference. The difference of propagation delay time results in different accuracies of Time-to-Digital Converter (TDC). This phenomenon shall be considered in the design of TDC implemented in FPGA. It can ensure better accuracy. (authors)

Use of FPGA and CPLD in nuclear reactor safety systems and its regulatory review requirements for reactor safety

International Nuclear Information System (INIS)

Roy, Suvadip; Biswas, Animesh; Pradhan, S.K.

2015-01-01

Field Programmable Gate Arrays (FPGA) and Complex Programmable Logic Devices (CPLD) is being used widely in safety critical and safety related systems in nuclear power plans like in trip logic units, Engineered Safety Feature (ESF) actuation decision logic and neutronic signal processing for their reprogrammability feature and compact design. These HDL Programmable devices (HPD) are complex devices consisting of both hardware and software which is used to implement the logic on the FPGA. It is observed that these Programmable devices suffer from various modes of failure and the major failures in these devices are due to Single Event Upset (SEU), where a highly energetic ionizing radiation may lead to device failure which can even occur in radiologically benign environment. Other failures can occur during steps of developing the hardware using software tools like during Synthesis and placement and routing of the desired hardware. Here a study on use of such devices in Nuclear Reactors, study on mode of failures of these devices, way to tackle such failure and development of review guidelines for review of such devices used in safety critical and safety related systems with special emphasis on choice of software tools, way to mitigate effects of SEU and simulation and hardware testing results to be reviewed by regulatory body during design safety review is done. (author)

Fine-grained parallelism accelerating for RNA secondary structure prediction with pseudoknots based on FPGA.

Science.gov (United States)

Xia, Fei; Jin, Guoqing

2014-06-01

PKNOTS is a most famous benchmark program and has been widely used to predict RNA secondary structure including pseudoknots. It adopts the standard four-dimensional (4D) dynamic programming (DP) method and is the basis of many variants and improved algorithms. Unfortunately, the O(N(6)) computing requirements and complicated data dependency greatly limits the usefulness of PKNOTS package with the explosion in gene database size. In this paper, we present a fine-grained parallel PKNOTS package and prototype system for accelerating RNA folding application based on FPGA chip. We adopted a series of storage optimization strategies to resolve the "Memory Wall" problem. We aggressively exploit parallel computing strategies to improve computational efficiency. We also propose several methods that collectively reduce the storage requirements for FPGA on-chip memory. To the best of our knowledge, our design is the first FPGA implementation for accelerating 4D DP problem for RNA folding application including pseudoknots. The experimental results show a factor of more than 50x average speedup over the PKNOTS-1.08 software running on a PC platform with Intel Core2 Q9400 Quad CPU for input RNA sequences. However, the power consumption of our FPGA accelerator is only about 50% of the general-purpose micro-processors.

Parallel Hough Transform-Based Straight Line Detection and Its FPGA Implementation in Embedded Vision

Directory of Open Access Journals (Sweden)

Nam Ling

2013-07-01

Full Text Available Hough Transform has been widely used for straight line detection in low-definition and still images, but it suffers from execution time and resource requirements. Field Programmable Gate Arrays (FPGA provide a competitive alternative for hardware acceleration to reap tremendous computing performance. In this paper, we propose a novel parallel Hough Transform (PHT and FPGA architecture-associated framework for real-time straight line detection in high-definition videos. A resource-optimized Canny edge detection method with enhanced non-maximum suppression conditions is presented to suppress most possible false edges and obtain more accurate candidate edge pixels for subsequent accelerated computation. Then, a novel PHT algorithm exploiting spatial angle-level parallelism is proposed to upgrade computational accuracy by improving the minimum computational step. Moreover, the FPGA based multi-level pipelined PHT architecture optimized by spatial parallelism ensures real-time computation for 1,024 × 768 resolution videos without any off-chip memory consumption. This framework is evaluated on ALTERA DE2-115 FPGA evaluation platform at a maximum frequency of 200 MHz, and it can calculate straight line parameters in 15.59 ms on the average for one frame. Qualitative and quantitative evaluation results have validated the system performance regarding data throughput, memory bandwidth, resource, speed and robustness.

Parallel Hough Transform-based straight line detection and its FPGA implementation in embedded vision.

Science.gov (United States)

Lu, Xiaofeng; Song, Li; Shen, Sumin; He, Kang; Yu, Songyu; Ling, Nam

2013-07-17

Hough Transform has been widely used for straight line detection in low-definition and still images, but it suffers from execution time and resource requirements. Field Programmable Gate Arrays (FPGA) provide a competitive alternative for hardware acceleration to reap tremendous computing performance. In this paper, we propose a novel parallel Hough Transform (PHT) and FPGA architecture-associated framework for real-time straight line detection in high-definition videos. A resource-optimized Canny edge detection method with enhanced non-maximum suppression conditions is presented to suppress most possible false edges and obtain more accurate candidate edge pixels for subsequent accelerated computation. Then, a novel PHT algorithm exploiting spatial angle-level parallelism is proposed to upgrade computational accuracy by improving the minimum computational step. Moreover, the FPGA based multi-level pipelined PHT architecture optimized by spatial parallelism ensures real-time computation for 1,024 × 768 resolution videos without any off-chip memory consumption. This framework is evaluated on ALTERA DE2-115 FPGA evaluation platform at a maximum frequency of 200 MHz, and it can calculate straight line parameters in 15.59 ms on the average for one frame. Qualitative and quantitative evaluation results have validated the system performance regarding data throughput, memory bandwidth, resource, speed and robustness.

FPGA Design and Verification Procedure for Nuclear Power Plant MMIS

Energy Technology Data Exchange (ETDEWEB)

Lee, Dongil; Yoo, Kawnwoo; Ryoo, Kwangki [Hanbat National Univ., Daejeon (Korea, Republic of)

2013-05-15

In this paper, it is shown that it is possible to ensure reliability by performing the steps of the verification based on the FPGA development methodology, to ensure the safety of application to the NPP MMIS of the FPGA run along the step. Currently, the PLC (Programmable Logic Controller) which is being developed is composed of the FPGA (Field Programmable Gate Array) and CPU (Central Processing Unit). As the importance of the FPGA in the NPP (Nuclear Power Plant) MMIS (Man-Machine Interface System) has been increasing than before, the research on the verification of the FPGA has being more and more concentrated recently.

FPGA Based Low Power DES Algorithm Design And Implementation using HTML Technology

DEFF Research Database (Denmark)

Thind, Vandana; Pandey, Bishwajeet; Kalia, Kartik

2016-01-01

In this particular work, we have done power analysis of DES algorithm implemented on 28nm FPGA using HTML (H-HSUL, T-TTL, M-MOBILE_DDR, L-LVCMOS) technology. In this research, we have used high performance software Xilinx ISE where we have selected four different IO Standards i.e. MOBILE_DDR, HSUL...

Design of a system based on DSP and FPGA for video recording and replaying

Science.gov (United States)

Kang, Yan; Wang, Heng

2013-08-01

This paper brings forward a video recording and replaying system with the architecture of Digital Signal Processor (DSP) and Field Programmable Gate Array (FPGA). The system achieved encoding, recording, decoding and replaying of Video Graphics Array (VGA) signals which are displayed on a monitor during airplanes and ships' navigating. In the architecture, the DSP is a main processor which is used for a large amount of complicated calculation during digital signal processing. The FPGA is a coprocessor for preprocessing video signals and implementing logic control in the system. In the hardware design of the system, Peripheral Device Transfer (PDT) function of the External Memory Interface (EMIF) is utilized to implement seamless interface among the DSP, the synchronous dynamic RAM (SDRAM) and the First-In-First-Out (FIFO) in the system. This transfer mode can avoid the bottle-neck of the data transfer and simplify the circuit between the DSP and its peripheral chips. The DSP's EMIF and two level matching chips are used to implement Advanced Technology Attachment (ATA) protocol on physical layer of the interface of an Integrated Drive Electronics (IDE) Hard Disk (HD), which has a high speed in data access and does not rely on a computer. Main functions of the logic on the FPGA are described and the screenshots of the behavioral simulation are provided in this paper. In the design of program on the DSP, Enhanced Direct Memory Access (EDMA) channels are used to transfer data between the FIFO and the SDRAM to exert the CPU's high performance on computing without intervention by the CPU and save its time spending. JPEG2000 is implemented to obtain high fidelity in video recording and replaying. Ways and means of acquiring high performance for code are briefly present. The ability of data processing of the system is desirable. And smoothness of the replayed video is acceptable. By right of its design flexibility and reliable operation, the system based on DSP and FPGA

Optical network and FPGA/DSP based control system for free electron laser

International Nuclear Information System (INIS)

Romaniuk, R.S.; Pozniak, K.T.; Czarski, T.; Czuba, K.; Giergusiewicz, W.; Kasprowicz, G.; Koprek, W.

2005-01-01

The work presents a structural and functional model of a distributed low level radio frequency (LLRF) control, diagnostic and telemetric system for a large industrial object. An example of system implementation is the European TESLA-XFEL accelerator. The free electron laser is expected to work in the VUV region now and in the range of X-rays in the future. The design of a system based on the FPGA circuits and multi-gigabit optical network is discussed. The system design approach is fully parametric. The major emphasis is put on the methods of the functional and hardware concentration to use fully both: a very big transmission capacity of the optical fiber telemetric channels and very big processing power of the latest series of DSP/PC enhanced and optical I/O equipped, FPGA chips. The subject of the work is the design of a universal, laboratory module of the LLRF sub-system. The current parameters of the system model, under the design, are presented. The considerations are shown on the background of the system application in the hostile industrial environment. The work is a digest of a few development threads of the hybrid, optoelectronic, telemetric networks (HOTN). In particular, the outline of construction theory of HOTN node was presented as well as the technology of complex, modular, multilayer HOTN system PCBs. The PCBs contain critical sub-systems of the node and the network. The presented exemplary sub-systems are: fast optical data transmission of 2.5 Gbit/s, 3.125 Gbit/s and 10 Gbit/s; fast A/C and C/A multichannel data conversion managed by FPGA chip (40 MHz, 65 MHz, 105 MHz), data and functionality concentration, integration of floating point calculations in the DSP units of FPGA circuit, using now discrete and next integrated PC chip with embedded OS; optical distributed timing system of phase reference; and 1GbEth video interface (over UTP or FX) for CCD telemetry and monitoring. The data and functions concentration in the HOTN node is necessary to

Multichannel FPGA based MVT system for high precision time (20 ps RMS) and charge measurement

Science.gov (United States)

Pałka, M.; Strzempek, P.; Korcyl, G.; Bednarski, T.; Niedźwiecki, Sz.; Białas, P.; Czerwiński, E.; Dulski, K.; Gajos, A.; Głowacz, B.; Gorgol, M.; Jasińska, B.; Kamińska, D.; Kajetanowicz, M.; Kowalski, P.; Kozik, T.; Krzemień, W.; Kubicz, E.; Mohhamed, M.; Raczyński, L.; Rudy, Z.; Rundel, O.; Salabura, P.; Sharma, N. G.; Silarski, M.; Smyrski, J.; Strzelecki, A.; Wieczorek, A.; Wiślicki, W.; Zieliński, M.; Zgardzińska, B.; Moskal, P.

2017-08-01

In this article it is presented an FPGA based Multi-Voltage Threshold (MVT) system which allows of sampling fast signals (1-2 ns rising and falling edge) in both voltage and time domain. It is possible to achieve a precision of time measurement of 20 ps RMS and reconstruct charge of signals, using a simple approach, with deviation from real value smaller than 10%. Utilization of the differential inputs of an FPGA chip as comparators together with an implementation of a TDC inside an FPGA allowed us to achieve a compact multi-channel system characterized by low power consumption and low production costs. This paper describes realization and functioning of the system comprising 192-channel TDC board and a four mezzanine cards which split incoming signals and discriminate them. The boards have been used to validate a newly developed Time-of-Flight Positron Emission Tomography system based on plastic scintillators. The achieved full system time resolution of σ(TOF) ≈ 68 ps is by factor of two better with respect to the current TOF-PET systems.

Symbol Synchronization for SDR Using a Polyphase Filterbank Based on an FPGA

Directory of Open Access Journals (Sweden)

P. Fiala

2015-09-01

Full Text Available This paper is devoted to the proposal of a highly efficient symbol synchronization subsystem for Software Defined Radio. The proposed feedback phase-locked loop timing synchronizer is suitable for parallel implementation on an FPGA. The polyphase FIR filter simultaneously performs matched-filtering and arbitrary interpolation between acquired samples. Determination of the proper sampling instant is achieved by selecting a suitable polyphase filterbank using a derived index. This index is determined based on the output either the Zero-Crossing or Gardner Timing Error Detector. The paper will extensively focus on simulation of the proposed synchronization system. On the basis of this simulation, a complete, fully pipelined VHDL description model is created. This model is composed of a fully parallel polyphase filterbank based on distributed arithmetic, timing error detector and interpolation control block. Finally, RTL synthesis on an Altera Cyclone IV FPGA is presented and resource utilization in comparison with a conventional model is analyzed.

FPGA-based prototype of portable environmental radiation monitor

Energy Technology Data Exchange (ETDEWEB)

Benahmed, A.; Elkarch, H. [CNESTEN -Centre National de l' Energie des Sciences et Techniques Nucleaires (Morocco)

2015-07-01

This new portable radiological environmental monitor consists of 2 main components, Gamma ionization chamber and a FPGA-based electronic enclosure linked to convivial software for treatment and analyzing. The HPIC ion chamber is the heart of this radiation measurement system and is running in range from 0 to 100 mR/h, so that the sensitivity at the output is 20 mV/μR/h, with a nearly flat energy response from 0,07 to 10 MEV. This paper presents a contribution for developing a new nuclear measurement data acquisition system based on Cyclone III FPGA Starter Kit ALTERA, and a user-friendly software to run real-time control and data processing. It was developed to substitute the older radiation monitor RSS-112 PIC installed in CNESTEN's Laboratory in order to improve some of its functionalities related to acquisition time and data memory capacity. As for the associated acquisition software, it was conceived under the virtual LabView platform from National Instrument, and offers a variety of system setup for radiation environmental monitoring. It gives choice to display both the statistical data and the dose rate. Statistical data shows a summary of current data, current time/date and dose integrator values, and the dose rate displays the current dose rate in large numbers for viewing from a distance as well as the date and time. The prototype version of this new instrument and its data processing software has been successfully tested and validated for viewing and monitoring the environmental radiation of Moroccan nuclear center. (authors)

CAN and FPGA communication engineering implementation of a CAN bus based measurement system on an FPGA development kit

CERN Document Server

Zhu, Yu

2010-01-01

Hauptbeschreibung The Controller Area Network (CAN), invented by Bosch in 1983, is a serial field bus protocol which was originally used in road vehicles and now is widely applied in other industrial fields. Since its birth automotive electronic engineers have been use Microcontrollers (MCU) to control the CAN bus. Today, as the Field-programmable Gate Array (FPGA) has become very advance, this book introduces a new method which uses an FPGA and a MCU jointly instead of a single MCU is to design a CAN bus measurement system. Furthermore the designed system should be able to work at the fastest

High speed FPGA-based Phasemeter for the far-infrared laser interferometers on EAST

Science.gov (United States)

Yao, Y.; Liu, H.; Zou, Z.; Li, W.; Lian, H.; Jie, Y.

2017-12-01

The far-infrared laser-based HCN interferometer and POlarimeter/INTerferometer\\break (POINT) system are important diagnostics for plasma density measurement on EAST tokamak. Both HCN and POINT provide high spatial and temporal resolution of electron density measurement and used for plasma density feedback control. The density is calculated by measuring the real-time phase difference between the reference beams and the probe beams. For long-pulse operations on EAST, the calculation of density has to meet the requirements of Real-Time and high precision. In this paper, a Phasemeter for far-infrared laser-based interferometers will be introduced. The FPGA-based Phasemeter leverages fast ADCs to obtain the three-frequency signals from VDI planar-diode Mixers, and realizes digital filters and an FFT algorithm in FPGA to provide real-time, high precision electron density output. Implementation of the Phasemeter will be helpful for the future plasma real-time feedback control in long-pulse discharge.

Design and measurements of SEU tolerant latches

CERN Document Server

Menouni, M; Barbero, M; Beccherle, R; Breugnon, P; Ely, R; Fougeron, D; García-Sciveres, M; Gnani, D; Hemperek, T; Karagounis, M; Kluit, R; Mekkaoui, A; Rozanov, A; Schipper, J-D

2008-01-01

Latches based on the Dual Interlocked storage Cell or DICE are very tolerant to Single Event Upsets (SEU). However, for highly scaled processes where the sizes continue to decrease, the data in this latch can be corrupted by an SEU due to charge sharing between adjacent nodes. Some layout considerations are used to improve the tolerance of the DICE latches to SEU and especially the influence of sensitive nodes separation is tested for DICE latches designed with a 130 nm process.

The FPGA Pixel Array Detector

International Nuclear Information System (INIS)

Hromalik, Marianne S.; Green, Katherine S.; Philipp, Hugh T.; Tate, Mark W.; Gruner, Sol M.

2013-01-01

A proposed design for a reconfigurable x-ray Pixel Array Detector (PAD) is described. It operates by integrating a high-end commercial field programmable gate array (FPGA) into a 3-layer device along with a high-resistivity diode detection layer and a custom, application-specific integrated circuit (ASIC) layer. The ASIC layer contains an energy-discriminating photon-counting front end with photon hits streamed directly to the FPGA via a massively parallel, high-speed data connection. FPGA resources can be allocated to perform user defined tasks on the pixel data streams, including the implementation of a direct time autocorrelation function (ACF) with time resolution down to 100 ns. Using the FPGA at the front end to calculate the ACF reduces the required data transfer rate by several orders of magnitude when compared to a fast framing detector. The FPGA-ASIC high-speed interface, as well as the in-FPGA implementation of a real-time ACF for x-ray photon correlation spectroscopy experiments has been designed and simulated. A 16×16 pixel prototype of the ASIC has been fabricated and is being tested. -- Highlights: ► We describe the novelty and need for the FPGA Pixel Array Detector. ► We describe the specifications and design of the Diode, ASIC and FPGA layers. ► We highlight the Autocorrelation Function (ACF) for speckle as an example application. ► Simulated FPGA output calculates the ACF for different input bitstreams to 100 ns. ► Reduced data transfer rate by 640× and sped up real-time ACF by 100× other methods.

Design of area array CCD image acquisition and display system based on FPGA

Science.gov (United States)

Li, Lei; Zhang, Ning; Li, Tianting; Pan, Yue; Dai, Yuming

2014-09-01

With the development of science and technology, CCD(Charge-coupled Device) has been widely applied in various fields and plays an important role in the modern sensing system, therefore researching a real-time image acquisition and display plan based on CCD device has great significance. This paper introduces an image data acquisition and display system of area array CCD based on FPGA. Several key technical challenges and problems of the system have also been analyzed and followed solutions put forward .The FPGA works as the core processing unit in the system that controls the integral time sequence .The ICX285AL area array CCD image sensor produced by SONY Corporation has been used in the system. The FPGA works to complete the driver of the area array CCD, then analog front end (AFE) processes the signal of the CCD image, including amplification, filtering, noise elimination, CDS correlation double sampling, etc. AD9945 produced by ADI Corporation to convert analog signal to digital signal. Developed Camera Link high-speed data transmission circuit, and completed the PC-end software design of the image acquisition, and realized the real-time display of images. The result through practical testing indicates that the system in the image acquisition and control is stable and reliable, and the indicators meet the actual project requirements.

FPGA-Based HD Camera System for the Micropositioning of Biomedical Micro-Objects Using a Contactless Micro-Conveyor

Directory of Open Access Journals (Sweden)

Elmar Yusifli

2017-03-01

Full Text Available With recent advancements, micro-object contactless conveyers are becoming an essential part of the biomedical sector. They help avoid any infection and damage that can occur due to external contact. In this context, a smart micro-conveyor is devised. It is a Field Programmable Gate Array (FPGA-based system that employs a smart surface for conveyance along with an OmniVision complementary metal-oxide-semiconductor (CMOS HD camera for micro-object position detection and tracking. A specific FPGA-based hardware design and VHSIC (Very High Speed Integrated Circuit Hardware Description Language (VHDL implementation are realized. It is done without employing any Nios processor or System on a Programmable Chip (SOPC builder based Central Processing Unit (CPU core. It keeps the system efficient in terms of resource utilization and power consumption. The micro-object positioning status is captured with an embedded FPGA-based camera driver and it is communicated to the Image Processing, Decision Making and Command (IPDC module. The IPDC is programmed in C++ and can run on a Personal Computer (PC or on any appropriate embedded system. The IPDC decisions are sent back to the FPGA, which pilots the smart surface accordingly. In this way, an automated closed-loop system is employed to convey the micro-object towards a desired location. The devised system architecture and implementation principle is described. Its functionality is also verified. Results have confirmed the proper functionality of the developed system, along with its outperformance compared to other solutions.

Burst-Mode Asynchronous Controllers on FPGA

Directory of Open Access Journals (Sweden)

Duarte L. Oliveira

2008-01-01

Full Text Available FPGAs have been mainly used to design synchronous circuits. Asynchronous design on FPGAs is difficult because the resulting circuit may suffer from hazard problems. We propose a method that implements a popular class of asynchronous circuits, known as burst mode, on FPGAs based on look-up table architectures. We present two conditions that, if satisfied, guarantee essential hazard-free implementation on any LUT-based FPGA. By doing that, besides all the intrinsic advantages of asynchronous over synchronous circuits, they also take advantage of the shorter design time and lower cost associated with FPGA designs.

FPGA - Based Technology and Systems for I and C of Existing and Advanced Reactors

International Nuclear Information System (INIS)

Bachmach, E.; Siora, O.; Tokarev, V.; Reshetytsky, S.; Kharchenko, V.; Bezsalyi, V.

2011-01-01

Control systems of modern nuclear installations (including water-cooled, WCR) are based on programmable technologies. Most of control systems modernizations which are implemented at operating nuclear installations are also based on application of programmable technologies. Besides, a range of features and properties is defied for programmable technologies. These features and properties make licensing process more complicated, facilitate appearance of common cause failures, make safety evaluation procedures more complicated, etc. Also it is known that programmable technologies significantly extend the time periods for project realization of new power units construction and modernization of the existing power units, and also it involves rise of its value. Company RADIY has developed the Platform of digital equipment RADIY on FPGA-based technology. In the article there is a description of the features of FPGA-technology developed and applied by Company RADIY, features of the Platform RADIY and systems realized on its base, which allow to minimize significantly above-mentioned negative features and properties of programmable technologies. Technology which realized in Platform RADIY allows to solve the whole set of tasks of control (including regulation) and protection of nuclear installations. Platform RADIY is a combination of the best features of traditional programmable technologies and FPGA-technology. According to the opinion of the authors of this article the technology which is realized in Platform RADIY is the key factor for solving of control and protection tasks of nuclear installations in the nearest future. (author)

The characterization and application of a low resource FPGA-based time to digital converter

Energy Technology Data Exchange (ETDEWEB)

Balla, Alessandro; Mario Beretta, Matteo; Ciambrone, Paolo; Gatta, Maurizio; Gonnella, Francesco [National Laboratories of Frascati (LNF) of INFN, via E. Fermi 40, 00044 Frascati (RM) (Italy); Iafolla, Lorenzo, E-mail: lorenzo.iafolla@lnf.infn.it [National Laboratories of Frascati (LNF) of INFN, via E. Fermi 40, 00044 Frascati (RM) (Italy); University of Rome “Tor Vergata” – Electronic Engineering Department (Italy); Mascolo, Matteo; Messi, Roberto [Roma-2 Department of INFN, via della Ricerca Scientifica, 1, 00133 Rome (Italy); University of Rome “Tor Vergata” – Physics Department (Italy); Moricciani, Dario [Roma-2 Department of INFN, via della Ricerca Scientifica, 1, 00133 Rome (Italy); Riondino, Domenico [National Laboratories of Frascati (LNF) of INFN, via E. Fermi 40, 00044 Frascati (RM) (Italy)

2014-03-01

Time to Digital Converters (TDCs) are very common devices in particles physics experiments. A lot of “off-the-shelf” TDCs can be employed but the necessity of a custom DAta acQuisition (DAQ) system makes the TDCs implemented on the Field-Programmable Gate Arrays (FPGAs) desirable. Most of the architectures developed so far are based on the tapped delay lines with precision down to 10 ps, obtained with high FPGA resources usage and non-linearity issues to be managed. Often such precision is not necessary; in this case TDC architectures with low resources occupancy are preferable allowing the implementation of data processing systems and of other utilities on the same device. In order to reconstruct γγ physics events tagged with High Energy Tagger (HET) in the KLOE-2 (K LOng Experiment 2), we need to measure the Time Of Flight (TOF) of the electrons and positrons from the KLOE-2 Interaction Point (IP) to our tagging stations (11 m apart). The required resolution must be better than the bunch spacing (2.7 ns). We have developed and implemented on a Xilinx Virtex-5 FPGA a 32 channel TDC with a precision of 255 ps and low non-linearity effects along with an embedded data acquisition system and the interface to the online FARM of KLOE-2. The TDC is based on a low resources occupancy technique: the 4×Oversampling technique which, in this work, is pushed to its best resolution and its performances were exhaustively measured. - Highlights: • We need to measure the Time of Flight of the detected particles to reconstruct physics events. • We looked for an embedded solution based on an FPGA to implement a TDC with its DAQ system. • The solution is based on the 4xOversampling technique which employs very effectively the FPGA. • The 4×Oversampling technique was characterized and the results and comparisons with the state of the art are presented.

FPGA-based real time implementation of MPPT-controller for photovoltaic systems

Energy Technology Data Exchange (ETDEWEB)

Mellit, A.; Rezzouk, H.; Medjahed, B. [Faculty of Sciences and Technology, Jijel University, Ouled-aissa, P.O. Box 98, Jijel 18000 (Algeria); Messai, A. [CRNB Ain Oussera, P.O. Box 180, 17200 Djelfa (Algeria)

2011-05-15

In this paper an FPGA-based implementation of a real time perturb and observe (P and O) algorithm for tracking the Maximum Power Point (MPP) of a photovoltaic (PV) generator is presented. The P and O algorithm has been designed using the very high-speed description language (VHDL) and implemented on Xilinx Virtex-II-Pro(xc2v1000-4fg456) - Field Programmable Gate Array (FPGA). The algorithm and the hardware have been simulated and tested by conditioning the power produced by the PV-modules installed on the rooftop of the ''Hall of Technology Laboratory'' at Jijel University. The main advantages of the developed MPPT are low cost, good velocity, acceptable reliability, and easy implementation. However, its main disadvantage is related to the fact that for fast changes in irradiance it may fail to track the maximum power point. The efficiency of the implemented P and O controller is about 96%. (author)

Automatic generation of application specific FPGA multicore accelerators

DEFF Research Database (Denmark)

Hindborg, Andreas Erik; Schleuniger, Pascal; Jensen, Nicklas Bo

2014-01-01

High performance computing systems make increasing use of hardware accelerators to improve performance and power properties. For large high-performance FPGAs to be successfully integrated in such computing systems, methods to raise the abstraction level of FPGA programming are required...... to identify optimal performance energy trade-offs points for a multicore based FPGA accelerator....

Performance enhancement of multi-core fiber transmission using real-time FPGA based pre-emphasis

NARCIS (Netherlands)

Hasanuzzaman, G. K.M.; Spolitis, S.; Salgals, T.; Braunfelds, J.; Morales, A.; Gonzalez, L. E.; Rommel, S.; Puerta, R.; Asensio, P.; Bobrovs, V.; Iezekiel, S.; Tafur Monroy, I.

2017-01-01

We experimentally demonstrate pre-emphasis based performance for a 2 km long 7-core multicore fiber link. Simultaneous transmission below the FEC threshold is achievable for all cores by using signal equalization in a FPGA.

Clock Gating Based Energy Efficient and Thermal Aware Design of Latin Unicode Reader for Natural Language Processing on FPGA

DEFF Research Database (Denmark)

Singh, Ritu; Kalia, Kartik; Minver, M. H.

2016-01-01

Abstract-In this paper we have aimed to design an energy efficient and thermally aware Latin Unicode Reader. Our design is based on 28nm FPGA (Kintex-7) and 40nm FPGA (Artix-7). In order to test the portability of our design, we are operating our design with respective frequency of different mobile...

A scalable FPGA-based digitizing platform for radiation data acquisition

International Nuclear Information System (INIS)

Schiffer, Randolph T.; Flaska, Marek; Pozzi, Sara A.; Carney, Sean; Wentzloff, David D.

2011-01-01

Regulating the proliferation of nuclear materials has become an important issue in our society. In order to detect the radiation given off by nuclear materials, systems implementing detectors connected to data processing modules have been developed. We have implemented a scalable, portable detection platform with a data processing module about the size of an external DVD drive. The data processing component of our system utilizes real-time data handling and has the potential for growth and behavior modifications through custom FPGA code editing. The size of our system is dynamic, so additional input channels can be implemented if necessary. This paper presents a scalable, portable detection system capable of transmitting streaming data from its inputs to a PC or laptop. The system also performs tail/total integral pulse shape discrimination (PSD) in real time on the FPGA to filter the data and selectively transmit pulses to a PC. The data arrives at the inputs of the data capturing module, is processed in real time by the onboard FPGA and is then transferred to a PC or laptop via a PCIe cord in discrete packets. The maximum transfer rate from the FPGA to the PC is 2000 MB/s. The Detection for Nuclear Non-Proliferation Group at University of Michigan will use the detection platform to achieve pre-processing of radiation data in real time. Such pre-processing includes PSD, pulse height distributions and particle times of arrival.

An FPGA-based sampling-ADC readout for the crystal barrel calorimeter

Energy Technology Data Exchange (ETDEWEB)

Muellers, Johannes [Helmholtz-Institut fuer Strahlen- und Kernphysik, Bonn (Germany); Marciniewski, Pawel [Angstroemlaboratoriet, Uppsala (Sweden); Collaboration: CBELSA/TAPS-Collaboration

2015-07-01

The CBELSA/TAPS experiment at the electron accelerator ELSA (Bonn) investigates the photoproduction of mesons off protons and neutrons. Presently the readout of the CsI(Tl)-crystals of the Crystal Barrel calorimeter is being upgraded from a PIN-diode readout to an APD readout to create a fast signal for first-level-triggering. This will increase the trigger efficiency especially for final states with only neutral particles substantially. To increase the possible data readout rate, which is currently limited by the digitization stage (LeCroy QDC 1885F) to ∼ 2 kHz, the implementation of a new Sampling-ADC (SADC) readout is being prepared. Based on the 64-channel PANDA-SADC, the CB-SADC design was modified and adapted to the needs of the CBELSA/TAPS experiment. It offers 64 channels in one NIM module, together with modular analog or FPGA-based digital shaping. The data transfer will be realized by two standard gigabit links. Using an FPGA together with SADCs provides a multitude of possibilities for online feature extraction, such as the determination of the energy deposited in the crystal, TDC capabilities and pile-up detection and recovery.

Real-time particle image velocimetry based on FPGA technology;Velocimetria PIV en tiempo real basada en logica programable FPGA

Energy Technology Data Exchange (ETDEWEB)

Iriarte Munoz, Jose Miguel [Universidad Nacional de Cuyo, Instituto Balseiro, Centro Atomico Bariloche (Argentina)

2008-07-01

Particle image velocimetry (PIV), based on laser sheet, is a method for image processing and calculation of distributed velocity fields.It is well established as a fluid dynamics measurement tool, being applied to liquid, gases and multiphase flows.Images of particles are processed by means of computationally demanding algorithms, what makes its real-time implementation difficult.The most probable displacements are found applying two dimensional cross-correlation function. In this work, we detail how it is possible to achieve real-time visualization of PIV method by designing an adaptive embedded architecture based on FPGA technology.We show first results of a physical field of velocity calculated by this platform system in a real-time approach.;La velocimetria por imagenes de particulas (PIV), basada en plano laser, es una potente herramienta de medicion en dinamica de fluidos, capaz de medir sin grandes errores, un campo de velocidades distribuido en liquidos, gases y flujo multifase.Los altos requerimientos computacionales de los algoritmos PIV dificultan su empleo en tiempo-real.En este trabajo presentamos el diseno de una plataforma basada en tecnologia FPGA para capturar video y procesar en tiempo real el algoritmo de correlacion cruzada bidimensional.Mostramos resultados de un primer abordaje de la captura de imagenes y procesamiento de un campo fisico de velocidades en tiempo real.

FPGA Based Low Power ROM Design Using Capacitance Scaling

DEFF Research Database (Denmark)

Bansal, Meenakshi; Bansal, Neha; Saini, Rishita

2015-01-01

An ideal capacitor will not dissipate any power, but a real capacitor wil l have some power dissipation. In this work, we are going to design capacitance scaling based low power ROM design. In order to test the compatibility of this ROM design with latest i7 Processor, we are operating this ROM w...... in I/O Power, saving of 0.2% occur in Leakage Power, there will be a saving of 11.54% occur in Total Power. This design is implemented on Virtex-5 FPGA using Xilinx ISE and Verilog....

FPGA Implementation of Video Transmission System Based on LTE

Directory of Open Access Journals (Sweden)

Lu Yan

2015-01-01

Full Text Available In order to support high-definition video transmission, an implementation of video transmission system based on Long Term Evolution is designed. This system is developed on Xilinx Virtex-6 FPGA ML605 Evaluation Board. The paper elaborates the features of baseband link designed in Xilinx ISE and protocol stack designed in Xilinx SDK, and introduces the process of setting up hardware and software platform in Xilinx XPS. According to test, this system consumes less hardware resource and is able to transmit bidirectional video clearly and stably.

Clock Gating Based Energy Efficient and Thermal Aware Design for Vedic Equation Solver on 28nm and 40nm FPGA

DEFF Research Database (Denmark)

Pandey, Bishwajeet; Pandey, Sujeet; Sharma, Shivani

2016-01-01

In this paper, we are integrating clock gating in design of energy efficient equation solver circuits based on Vedic mathematics. Clock gating is one of the best energy efficient techniques. The Sutra 'SunyamSamyasamuccaye' says thatif sum of numerator and sum of denominator is same then we can e......, 94.54% for 1800MHz, and 94.02% for 2.2GHz, when we use gated clock instead of un gated one on 40nm FPGA and temperature is 329.85K. Power consumption in 28nm FPGA is less than 40nm FPGA....

Technologies for faults diagnosis of FPGA logic blocks

Directory of Open Access Journals (Sweden)

C. U. Ngene

2012-08-01

Full Text Available The critical issues of testing field programmable gate arrays (FPGA with a view to diagnosing faults are an important step that ensures the reliability of FPGA designs. Correct diagnosis of faulty logic blocks of FPGAs guarantees restoration of functionality through replacement of faulty block with replacement units. This process can be done autonomously or without the intervention of an engineer depending on application area. This paper considers two methods for analysing test results of FPGA logic blocks with the purpose of localising and distinguishing faults. The algebraic logic and vector-logical methods are proposed for diagnosing faulty logic blocks in FPGA fabric. It is found that the algebraic logic method is more useful for processing of sparse faults tables when the number of coordinates with 1s values with respect to zero values ​​is not more than 20%, whereas the vector-logical method facilitates the analysis of faults table with predominance of 1s values.

FPGA-based real-time simulation of power converters of renewable energy sources

Energy Technology Data Exchange (ETDEWEB)

Kokenyesi, Tamas; Varjasi, Istvan [Budapest University of Technology and Economics, Department of Automation and Applied Informatics (Hungary)], e-mail: kokenyesi.tamas@gmail.com, email: varjasi@aut.bme.hu

2011-07-01

This paper presents a hardware-in-the-loop testing (HIL) approach based on a field programmable gate array (FPGA) real-time simulation with real measured signals designed to reduce the cost and time for testing the main circuit of a power converter significantly. This method allows the control unit to measure its outputs on the same signal level in a completely transparent way, unlike other computer based simulation methods. As an example, a simulator for a three-phase inverter used for DC/AC conversion or frequency control is described and the simulated network illustrated. The calculation procedure and relative equations are also detailed, with simulation parameters and some measurement results being presented. It was found that the main advantage of this method is speed, which was only limited by the actual capabilities of the FPGA used. This method can be applied to a wide variety of analog circuits, reducing time to market. More complex circuits and higher frequencies could be simulated in the future with the evolution of FPGAs.

Time-delayed chameleon: Analysis, synchronization and FPGA implementation

Science.gov (United States)

Rajagopal, Karthikeyan; Jafari, Sajad; Laarem, Guessas

2017-12-01

In this paper we report a time-delayed chameleon-like chaotic system which can belong to different families of chaotic attractors depending on the choices of parameters. Such a characteristic of self-excited and hidden chaotic flows in a simple 3D system with time delay has not been reported earlier. Dynamic analysis of the proposed time-delayed systems are analysed in time-delay space and parameter space. A novel adaptive modified functional projective lag synchronization algorithm is derived for synchronizing identical time-delayed chameleon systems with uncertain parameters. The proposed time-delayed systems and the synchronization algorithm with controllers and parameter estimates are then implemented in FPGA using hardware-software co-simulation and the results are presented.

An FPGA-based reconfigurable DDC algorithm

Science.gov (United States)

Juszczyk, B.; Kasprowicz, G.

2016-09-01

This paper describes implementation of reconfigurable digital down converter in an FPGA structure. System is designed to work with quadrature signals. One of the main criteria of the project was to provied wide range of reconfiguration in order to fulfill various application rage. Potential applications include: software defined radio receiver, passive noise radars and measurement data compression. This document contains general system overview, short description of hardware used in the project and gateware implementation.

Study on modulation amplitude stabilization method for PEM based on FPGA in atomic magnetometer

Science.gov (United States)

Wang, Qinghua; Quan, Wei; Duan, Lihong

2017-10-01

Atomic magnetometer which uses atoms as sensitive elements have ultra-high precision and has wide applications in scientific researches. The photoelastic modulation method based on photoelastic modulator (PEM) is used in the atomic magnetometer to detect the small optical rotation angle of a linearly polarized light. However, the modulation amplitude of the PEM will drift due to the environmental factors, which reduces the precision and long-term stability of the atomic magnetometer. Consequently, stabilizing the PEM's modulation amplitude is essential to precision measurement. In this paper, a modulation amplitude stabilization method for PEM based on Field Programmable Gate Array (FPGA) is proposed. The designed control system contains an optical setup and an electrical part. The optical setup is used to measure the PEM's modulation amplitude. The FPGA chip, with the PID control algorithm implemented in it, is used as the electrical part's micro controller. The closed loop control method based on the photoelastic modulation detection system can directly measure the PEM's modulation amplitude in real time, without increasing the additional optical devices. In addition, the operating speed of the modulation amplitude stabilization control system can be greatly improved because of the FPGA's parallel computing feature, and the PID control algorithm ensures flexibility to meet different needs of the PEM's modulation amplitude set values. The Modelsim simulation results show the correctness of the PID control algorithm, and the long-term stability of the PEM's modulation amplitude reaches 0.35% in a 3-hour continuous measurement.

FPGA-Based Flexible Hardware Architecture for Image Interest Point Detection

Directory of Open Access Journals (Sweden)

Ana Hernandez-Lopez

2015-07-01

Full Text Available An important challenge in computer vision is the implementation of fast and accurate feature detectors, as they are the basis for high-level image processing analysis and understanding. However, image feature detectors cannot be easily applied in embedded scenarios, mainly due to the fact that they are time consuming and require a significant amount of processing power. Although some feature detectors have been implemented in hardware, most implementations target a single detector under very specific constraints. This paper proposes a flexible hardware implementation approach for computing interest point extraction from grey-level images based on two different detectors, Harris and SUSAN, suitable for robotic applications. The design is based on parallel and configurable processing elements for window operators and a buffering strategy to support a coarse-grain pipeline scheme for operator sequencing. When targeted to a Virtex-6 FPGA, a throughput of 49.45 Mpixel/s (processing rate of 161 frames per second of VGA image resolution is achieved at a clock frequency of 50 MHz.

Development of FPGA-based High Speed Serial Links for High Energy Physics Experiments

CERN Document Server

Perrella, Sabrina; Giordano, Raffaele; Izzo, Vincenzo

Ricerca Simple Search Advanced Search Ultime accessioni Browse Browse by Author Browse by Subject Browse by Year Browse by Type Browse by Accessibilità del full-text Informazioni Policy About FAQ Contatti Perrella, Sabrina (2016) Development of FPGA-based High-Speed serial links for High Energy Physics Experiments. [Tesi di dottorato] [img] Text Perrella_Sabrina_28.pdf Download (59MB) | Preview [error in script] [error in script] Item Type: Tesi di dottorato Lingua: English Title: Development of FPGA-based High-Speed serial links for High Energy Physics Experiments Creators: Creators\tEmail Perrella, Sabrina\tsa.perrella@gmail.com Date: 31 March 2016 Number of Pages: 113 Institution: Università degli Studi di Napoli Federico II Department: Fisica Scuola di dottorato: Scienze fisiche Dottorato: Fisica fondamentale ed applicata Ciclo di dottorato: 28 Coordinatore del Corso di dottorato: nome\temail Velotta, Raffaele\tvelotta@na.infn.it Tutor: nome\temail Alviggi, Mariagrazia\tUNSPECIFIED Giordano, ...

FPGA BASED ASYNCHRONOUS PIPELINED MB-OFDM UWB TRANSMITTER BACKEND MODULES

Directory of Open Access Journals (Sweden)

M. Santhi

2010-03-01

Full Text Available In this paper, a novel scheme is proposed which comprises the advantages of asynchronous pipelining techniques and the advantages of FPGAs for implementing a 200Mbps MB-OFDM UWB transmitter digital backend modules. In asynchronous pipelined system, registers are used as in synchronous system. But they are controlled by handshaking signals. Since FPGAs are rich in registers, design and implementation of asynchronous pipelined MBOFDM UWB transmitter on FPGA using four-phase bundled-data protocol is considered in this paper. Novel ideas have also been proposed for designing asynchronous OFDM using Modified Radix-24 SDF and asynchronous interleaver using two RAM banks. Implementation has been performed on ALTERA STRATIX II EP2S60F1020C4 FPGA and it is operating at a speed of 350MHz. It is assured that the proposed MB-OFDM UWB system can be made to work on STRATIX III device with the operating frequency of 528MHz in compliance to the ECMA-368 standard. The proposed scheme is also applicable for FPGA from other vendors and ASIC.

Development of a prototype acquisition and data processing system based on FPGA

International Nuclear Information System (INIS)

Romero, L; Bellino, P

2012-01-01

We present the first stage of the expansion and improvement of a signal acquisition system based on FPGA. This system will acquire and process signals from nuclear detectors working in both pulse and current mode. The aim of this development is to unify all the actual systems for physical measurements in nuclear facilities and reactors (author)

Fpga As A Part Of Ms Windows Control Environment

Directory of Open Access Journals (Sweden)

Krzysztof Kołek

2007-01-01

Full Text Available The attention is focused on the Windows operating system (OS used as a control and measurementenvironment. Windows OS due to extensions becomes a real-time OS (RTOS.Benefits and drawbacks of typical software extensions are compared. As far as hardwaresolutions are concerned the field programmable gate arrays FPGA technology is proposed toensure fast time-critical operations. FPGA-based parallel execution and hardware implementationof the data processing algorithms significantly outperform the classical microprocessoroperating modes. Suitability of the RTOS for a particular application and FPGA hardwaremaintenance is studied.

Development of γ dose rate monitor based on FPGA and single-chip microcomputer

International Nuclear Information System (INIS)

He Zhiguo; Ling Qiu; Guo Lanying; Yang Binhua

2009-01-01

A novelγdose rate monitor with multiple channels signal collection in which takes the FPGA as the core process chip and single-chip microcomputer as the data processor had been developed. This paper introduced the communication interface design between FPGA and MCU, and gave the data acquisition module and the function simulation chart designed by FPGA. In addition, the software and hardware design diagrams of MCU had been given in this paper. The maximum digitallization was carried on in the designing process. The experiments showed that the scheme for the system matched to the requests completely. (authors)

A low power flash-FPGA based brain implant micro-system of PID control.

Science.gov (United States)

Lijuan Xia; Fattah, Nabeel; Soltan, Ahmed; Jackson, Andrew; Chester, Graeme; Degenaar, Patrick

2017-07-01

In this paper, we demonstrate that a low power flash FPGA based micro-system can provide a low power programmable interface for closed-loop brain implant inter- faces. The proposed micro-system receives recording local field potential (LFP) signals from an implanted probe, performs closed-loop control using a first order control system, then converts the signal into an optogenetic control stimulus pattern. Stimulus can be implemented through optoelectronic probes. The long term target is for both fundamental neuroscience applications and for clinical use in treating epilepsy. Utilizing our device, closed-loop processing consumes only 14nJ of power per PID cycle compared to 1.52μJ per cycle for a micro-controller implementation. Compared to an application specific digital integrated circuit, flash FPGA's are inherently programmable.

Embedded Detection and Correction of SEU Bursts in SRAM Memories Used as Radiation Detectors

CERN Document Server

Secondo, R.; Danzeca, S.; Losito, R.; Peronnard, P.; Masi, A.; Brugger, M.; Dusseau, L.

2016-01-01

SRAM memories are widely used as particle fluence detectors in high radiation environments, such as in the Radiation Monitoring System (RadMon) currently in operation in the CERN accelerator complex. Multiple Cell Upsets (MCUs), arising from micro-latchup events, are characterized by a large number of SEUs, ultimately affecting the measurement of particle fluxes and resulting in corrupted data and accuracy losses. A study of the generation of this type of SEU bursts was performed on an 8 Mbit 90-nm SRAM memory. Experimental tests were carried out with a focused beam of protons on target as well as in a mixed field environment dominated by high energy hadrons. A solution approach using an on-line detection and correction algorithm embedded on an FPGA was investigated and evaluated for use on a RadMon device.

Real-time particle image velocimetry based on FPGA technology

International Nuclear Information System (INIS)

Iriarte Munoz, Jose Miguel

2008-01-01

Particle image velocimetry (PIV), based on laser sheet, is a method for image processing and calculation of distributed velocity fields.It is well established as a fluid dynamics measurement tool, being applied to liquid, gases and multiphase flows.Images of particles are processed by means of computationally demanding algorithms, what makes its real-time implementation difficult.The most probable displacements are found applying two dimensional cross-correlation function. In this work, we detail how it is possible to achieve real-time visualization of PIV method by designing an adaptive embedded architecture based on FPGA technology.We show first results of a physical field of velocity calculated by this platform system in a real-time approach. [es

Input/output Buffer based Vedic Multiplier Design for Thermal Aware Energy Efficient Digital Signal Processing on 28nm FPGA

DEFF Research Database (Denmark)

Goswami, Kavita; Pandey, Bishwajeet; Hussain, Dil muhammed Akbar

2016-01-01

Multiplier is used for multiplication of a signal and a constant in digital signal processing (DSP). 28nm technology based Vedic multiplier is implemented with use of VHDL HDL, Xilinx ISE, Kintex-7 FPGA and XPower Analyzer. Vedic multiplier gain speed improvements by parallelizing the generation...... Programmable Gate Array (FPGA) in order to reduce the development cost. The development cost for Application Specific Integrated Circuits (ASICs) are high in compare to FPGA. Selection of the most energy efficient IO standards in place of signal gating is the main design methodology for design of energy...... efficient Vedic multiplier.There is 68.51%, 69.86%, 74.65%, and 78.39% contraction in total power of Vedic multiplier on 28nm Kintex-7 FPGA, when we use HSTL_II in place of HSTL_II_DCI_18 at 56.7oC, 53.5oC, 40oC and 21oC respectively....

Development of an FPGA-based multipoint laser pyroshock measurement system for explosive bolts

International Nuclear Information System (INIS)

Abbas, Syed Haider; Lee, Jung-Ryul; Jang, Jae-Kyeong; Kim, Zaeill

2016-01-01

Pyroshock can cause failure to the objective of an aerospace structure by damaging its sensitive electronic equipment, which is responsible for performing decisive operations. A pyroshock is the high intensity shock wave that is generated when a pyrotechnic device is explosively triggered to separate, release, or activate structural subsystems of an aerospace architecture. Pyroshock measurement plays an important role in experimental simulations to understand the characteristics of pyroshock on the host structure. This paper presents a technology to measure a pyroshock wave at multiple points using laser Doppler vibrometers (LDVs). These LDVs detect the pyroshock wave generated due to an explosive-based pyrotechnical event. Field programmable gate array (FPGA) based data acquisition is used in the study to acquire pyroshock signals simultaneously from multiple channels. This paper describes the complete system design for multipoint pyroshock measurement. The firmware architecture for the implementation of multichannel data acquisition on an FPGA-based development board is also discussed. An experiment using explosive bolts was configured to test the reliability of the system. Pyroshock was generated using explosive excitation on a 22-mm-thick steel plate. Three LDVs were deployed to capture the pyroshock wave at different points. The pyroshocks captured were displayed as acceleration plots. The results showed that our system effectively captured the pyroshock wave with a peak-to-peak magnitude of 303 741 g. The contribution of this paper is a specialized architecture of firmware design programmed in FPGA for data acquisition of large amount of multichannel pyroshock data. The advantages of the developed system are the near-field, multipoint, non-contact, and remote measurement of a pyroshock wave, which is dangerous and expensive to produce in aerospace pyrotechnic tests.

Development of an FPGA-based multipoint laser pyroshock measurement system for explosive bolts

Energy Technology Data Exchange (ETDEWEB)

Abbas, Syed Haider; Lee, Jung-Ryul [Department of Aerospace Engineering, Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of); Jang, Jae-Kyeong [The Engineering Institute-Korea, Chonbuk National University, Jeonju (Korea, Republic of); Kim, Zaeill [The 4th R& D Institute-1st directorate, Agency for Defense Development, Daejeon (Korea, Republic of)

2016-07-15

Pyroshock can cause failure to the objective of an aerospace structure by damaging its sensitive electronic equipment, which is responsible for performing decisive operations. A pyroshock is the high intensity shock wave that is generated when a pyrotechnic device is explosively triggered to separate, release, or activate structural subsystems of an aerospace architecture. Pyroshock measurement plays an important role in experimental simulations to understand the characteristics of pyroshock on the host structure. This paper presents a technology to measure a pyroshock wave at multiple points using laser Doppler vibrometers (LDVs). These LDVs detect the pyroshock wave generated due to an explosive-based pyrotechnical event. Field programmable gate array (FPGA) based data acquisition is used in the study to acquire pyroshock signals simultaneously from multiple channels. This paper describes the complete system design for multipoint pyroshock measurement. The firmware architecture for the implementation of multichannel data acquisition on an FPGA-based development board is also discussed. An experiment using explosive bolts was configured to test the reliability of the system. Pyroshock was generated using explosive excitation on a 22-mm-thick steel plate. Three LDVs were deployed to capture the pyroshock wave at different points. The pyroshocks captured were displayed as acceleration plots. The results showed that our system effectively captured the pyroshock wave with a peak-to-peak magnitude of 303 741 g. The contribution of this paper is a specialized architecture of firmware design programmed in FPGA for data acquisition of large amount of multichannel pyroshock data. The advantages of the developed system are the near-field, multipoint, non-contact, and remote measurement of a pyroshock wave, which is dangerous and expensive to produce in aerospace pyrotechnic tests.

Design and implementation of STD32-BUS based reactor protection trip unit on FPGA imbaby

International Nuclear Information System (INIS)

Mahmoud, I.; Elnokity, O.A.; Refai, M.K.

2007-01-01

This paper presents a way to design and implement the Trip Unit of a Reactor Protection System (RPS) using a Field Programmable Gate Arrays (FPGA). Instead of the traditional embedded Microprocessor based interface design method, a proposed tailor made FPGA based circuit is built to substitute the Trip Unit (TL1) existing in Egypt's 2' ' Research reactor ETRR-2. The existing embedded system is built around the STD32 field Computer Bus which used in industrial and process control applications. It is modular, rugged, reliable, and easy-to-use and is able to support a large mix of I/O cards and to easily change its configuration in the future. Therefore, the state machine of this bus is extracted from its timing diagrams and implemented in VHDL to interface the designed TU circuit. The proposed designed circuit implemented using ALTERA EPF10K10LC84-3 chip replaces the Single Board Computer which have the embedded SAY program of the TU providing the same integrated HAV and SAV functions implemented in FPGA Chip housed in an printed circuit board, which uses the same shape and specifications of STD32 boards. H/W implementation of both TU and STD32 Bus in VHDL addresses the issues of safety and reusability

Porting VIRTEX4 data acquisition design to SPARTAN6 FPGA

International Nuclear Information System (INIS)

Suetoe, J.; Hegyesi, G.

2012-01-01

Complete text of publication follows. The Atomki's Virtex 4 based 4 channel data acquisition card (LIR) card was used in many applications (miniPET-II, miniPET-III, data acquisition system for the multichannel plate installed at the ECR lab). The goal of the work was to improve the LIR using a higher performance FPGA (Spartan6 Trenz module). The Trenz module based system also supports ADC channels up to 16 channels. This work also implied the porting of the Virtex4 based VHDL code to Spartan 6. Further advantage of the proposed system, besides the improvement in the number of ADC channels, that the Spartan6 FPGA is able to run more complex digital signal processing algorithms than the Virtex 4 FPGA. Easy access to the control parameters (via serial interface or Ethernet), flexibility and high performance were considered during the development. SPARTAN6 FPGA based data acquisition provides more facilities than the VIRTEX4 based. SPARTAN6 is a newer generation of XILINX’s FPGAs, which excellent into the high-speed data acquisition. We ported the HDL code, which runs on LIR module (VIRTEX4 based), to the Trenz module (SPARTAN6 based). The main parts of the whole program code are the command line interpreter, GMII interface, DHCP process, ARP process and the data read out. Those parts were implemented by picoblaze embedded system. Figure 1 shows the command line interpreter process in the Hyper Terminal. The command line interpreter communicates with the PC via serial port. In addition, the AdamIOSetting software also use the serial communication, which was created to the VIRTEX FPGA based data collector. In the Wireshark network analyzer software we examined the DHCP and ARP process and using the AdamIOSettings software we tested the data read out from the flash memory of FPGA board. Figure 2 shows the AdamIOSettings program. Acknowledgements. This work was supported by the ENIAC CSI Project (No.120209).

The FPGA realization of the general cellular automata based cryptographic hash functions: Performance and effectiveness

Directory of Open Access Journals (Sweden)

P. G. Klyucharev

2014-01-01

Full Text Available In the paper the author considers hardware implementation of the GRACE-H family general cellular automata based cryptographic hash functions. VHDL is used as a language and Altera FPGA as a platform for hardware implementation. Performance and effectiveness of the FPGA implementations of GRACE-H hash functions were compared with Keccak (SHA-3, SHA-256, BLAKE, Groestl, JH, Skein hash functions. According to the performed tests, performance of the hardware implementation of GRACE-H family hash functions significantly (up to 12 times exceeded performance of the hardware implementation of previously known hash functions, and effectiveness of that hardware implementation was also better (up to 4 times.

Implementation of T-box/T/sup -1/-box based AES design on latest xilinx fpga

International Nuclear Information System (INIS)

Kundi, D.E.; Aziz, A.

2015-01-01

This work presents an efficient implementation of the AES (Advance Encryption Standard) based on Tbox/T-1-box design for both the encryption and decryption on FPGA (Field Programmable Gate Array). The proposed architecture not only make efficient use of full capacity of dedicated 32 Kb BRAM (Block RAM) of latest Xilinx FPGAs (Virtex-5, Virtex-6 and 7 Series) but also saves considerable amount of BRAM and logical resources by using multiple accesses from single BRAM in one cycle of system clock as compared to conventional LUT (Look-Up-Table) techniques. The proposed T-box/T-1-box based AES design for both the encryption and decryption fits into just 4 BRAMs on FPGA and results in good efficiency TPS (Throughput per Slice) with less power consumption. (author)

Overview and future developments of the FPGA-based DAQ of COMPASS

Energy Technology Data Exchange (ETDEWEB)

Bai, Yunpeng; Huber, Stefan; Konorov, Igor; Levit, Dmytro [Physik-Department E18, Technische Universitaet Muenchen (Germany); Bodlak, Martin [Department of Low-Temperature Physics, Charles University Prague (Czech Republic); Frolov, Vladimir [European Organization for Nuclear Research - CERN (Switzerland); Jary, Vladimir; Virius, Miroslav [Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University (Czech Republic); Novy, Josef [European Organization for Nuclear Research - CERN (Switzerland); Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University (Czech Republic); Steffen, Dominik [Physik-Department E18, Technische Universitaet Muenchen (Germany); European Organization for Nuclear Research - CERN (Switzerland)

2016-07-01

COMPASS is a fixed-target experiment at the SPS accelerator at CERN dedicated to the study of hadron structure and spectroscopy. In 2014, an FPGA-based data acquisition system (FDAQ) was deployed. Its hardware event builder consisting of nine custom designed FPGA-cards replaced 30 distributed online computers and around 100 PCI cards. As a result, the new DAQ provides higher bandwidth and better reliability. By buffering the data, the system exploits the spill structure of the SPS averaging the maximum on-spill data rate of 1.5 GB/s over the whole SPS duty cycle. A modern run control software allows user-friendly monitoring and configuration of the hardware nodes of the event builder. From 2016, it is planned to wire all point-to-point high-speed links via a fully programmable crosspoint switch. The crosspoint switch will provide a fully customizable DAQ network topology between front-end electronics, the event building hardware, and the readout computers. It will therefore simplify compensation for hardware failure and improve load balancing.

[Design of extracorporeal apparatus of capsule endoscopy based on ARM+FPGA].

Science.gov (United States)

Wang, Shenghua; Zhang, Sijie; Wang, Yue; Wang, Zhenxing

2011-10-01

Considering that the patients would bear the annoyance of fixed posture for long time when they are examined with gastrointestinal wireless endoscopy, even though portable devices have been developed, the treatments still depend on PC so much, we proposed an embedded solution based on ARM + FPGA. It used embedded ARM9 S3C2440 as processor core, collected images from digestive tract through capsule endoscopy which can be swallowed down there, and wirelessly transferred these images to the receiving system, then used video decoder chip SAA7114H for analog of NTSC video image decode. And under FPGA's logic controlling, effective digital video signal was transferred to S3C2440 for further treatment. Finally within the embedded Linux environment, we programmed the visual user interfaces using the QT/Embedded, realizing the offline record of the real-time video images of digestive tract portable and preferences. It can make patients move more freely and even without PC when examining. In addition, the method greatly improves the efficiency of the doctor, and is more intelligent and with more humane nature.

DNA Processing and Reassembly on General Purpose FPGA-based Development Boards

Directory of Open Access Journals (Sweden)

SZÁSZ Csaba

2017-05-01

Full Text Available The great majority of researchers involved in microelectronics generally agree that many scientific challenges in life sciences have associated with them a powerful computational requirement that must be solved before scientific progress can be made. The current trend in Deoxyribonucleic Acid (DNA computing technologies is to develop special hardware platforms capable to provide the needed processing performance at lower cost. In this endeavor the FPGA-based (Field Programmable Gate Arrays configurations aimed to accelerate genome sequencing and reassembly plays a leading role. This paper emphasizes benefits and advantages using general purpose FPGA-based development boards in DNA reassembly applications beside the special hardware architecture solutions. An original approach is unfolded which outlines the versatility of high performance ready-to-use manufacturer development platforms endowed with powerful hardware resources fully optimized for high speed processing applications. The theoretical arguments are supported via an intuitive implementation example where the designer it is discharged from any hardware development effort and completely assisted in exclusive concentration only on software design issues providing greatly reduced application development cycles. The experiments prove that such boards available on the market are suitable to fulfill in all a wide range of DNA sequencing and reassembly applications.

Potential improvement of CANDU NPP safety margins by shortening the response time of shutdown systems using FPGA based implementation

Energy Technology Data Exchange (ETDEWEB)

Jingke She, E-mail: jshe2@uwo.ca [Department of Electrical and Computer Engineering, University of Western Ontario, London, Ontario N6A 5B9 (Canada); Jin Jiang, E-mail: jjiang@eng.uwo.ca [Department of Electrical and Computer Engineering, University of Western Ontario, London, Ontario N6A 5B9 (Canada)

2012-03-15

Highlights: Black-Right-Pointing-Pointer Quantitative analysis of the safety margin improvement through thermalhydraulic simulation and analysis. Black-Right-Pointing-Pointer Hardware-in-the-loop simulation of realizing the improvement by an FPGA-based SDS1. Black-Right-Pointing-Pointer Verification of potential operating power upgrade without endangering the plant safety. - Abstract: The relationship between the peak values of critical reactor variables, such as neutronic power, inside a CANDU reactor and the speed of the response of its shutdown system has been analyzed in the event of a large loss of coolant accident (LOCA). The advantage of shortening the response time of the shutdown action has been demonstrated in term of the improved safety margin. A field programmable gate array (FPGA) platform has been chosen to implement such a shutdown system. Hardware-in-the-loop (HIL) simulations have been performed to demonstrate the feasibility of this concept. Furthermore, connections between the speed of response of the shutdown system and the nominal operating power level of the reactor have been drawn to support for potential power upgrade for existing power plants.

Central FPGA-based destination and load control in the LHCb MHz event readout

International Nuclear Information System (INIS)

Jacobsson, R.

2012-01-01

The readout strategy of the LHCb experiment is based on complete event readout at 1 MHz. A set of 320 sub-detector readout boards transmit event fragments at total rate of 24.6 MHz at a bandwidth usage of up to 70 GB/s over a commercial switching network based on Gigabit Ethernet to a distributed event building and high-level trigger processing farm with 1470 individual multi-core computer nodes. In the original specifications, the readout was based on a pure push protocol. This paper describes the proposal, implementation, and experience of a non-conventional mixture of a push and a pull protocol, akin to credit-based flow control. An FPGA-based central master module, partly operating at the LHC bunch clock frequency of 40.08 MHz and partly at a double clock speed, is in charge of the entire trigger and readout control from the front-end electronics up to the high-level trigger farm. One FPGA is dedicated to controlling the event fragment packing in the readout boards, the assignment of the farm node destination for each event, and controls the farm load based on an asynchronous pull mechanism from each farm node. This dynamic readout scheme relies on generic event requests and the concept of node credit allowing load control and trigger rate regulation as a function of the global farm load. It also allows the vital task of fast central monitoring and automatic recovery in-flight of failing nodes while maintaining dead-time and event loss at a minimum. This paper demonstrates the strength and suitability of implementing this real-time task for a very large distributed system in an FPGA where no random delays are introduced, and where extreme reliability and accurate event accounting are fundamental requirements. It was in use during the entire commissioning phase of LHCb and has been in faultless operation during the first two years of physics luminosity data taking.

Central FPGA-based destination and load control in the LHCb MHz event readout

Science.gov (United States)

Jacobsson, R.

2012-10-01

The readout strategy of the LHCb experiment is based on complete event readout at 1 MHz. A set of 320 sub-detector readout boards transmit event fragments at total rate of 24.6 MHz at a bandwidth usage of up to 70 GB/s over a commercial switching network based on Gigabit Ethernet to a distributed event building and high-level trigger processing farm with 1470 individual multi-core computer nodes. In the original specifications, the readout was based on a pure push protocol. This paper describes the proposal, implementation, and experience of a non-conventional mixture of a push and a pull protocol, akin to credit-based flow control. An FPGA-based central master module, partly operating at the LHC bunch clock frequency of 40.08 MHz and partly at a double clock speed, is in charge of the entire trigger and readout control from the front-end electronics up to the high-level trigger farm. One FPGA is dedicated to controlling the event fragment packing in the readout boards, the assignment of the farm node destination for each event, and controls the farm load based on an asynchronous pull mechanism from each farm node. This dynamic readout scheme relies on generic event requests and the concept of node credit allowing load control and trigger rate regulation as a function of the global farm load. It also allows the vital task of fast central monitoring and automatic recovery in-flight of failing nodes while maintaining dead-time and event loss at a minimum. This paper demonstrates the strength and suitability of implementing this real-time task for a very large distributed system in an FPGA where no random delays are introduced, and where extreme reliability and accurate event accounting are fundamental requirements. It was in use during the entire commissioning phase of LHCb and has been in faultless operation during the first two years of physics luminosity data taking.

The performance and limitations of FPGA-based digital servos for atomic, molecular, and optical physics experiments.

Science.gov (United States)

Yu, Shi Jing; Fajeau, Emma; Liu, Lin Qiao; Jones, David J; Madison, Kirk W

2018-02-01

In this work, we address the advantages, limitations, and technical subtleties of employing field programmable gate array (FPGA)-based digital servos for high-bandwidth feedback control of lasers in atomic, molecular, and optical physics experiments. Specifically, we provide the results of benchmark performance tests in experimental setups including noise, bandwidth, and dynamic range for two digital servos built with low and mid-range priced FPGA development platforms. The digital servo results are compared to results obtained from a commercially available state-of-the-art analog servo using the same plant for control (intensity stabilization). The digital servos have feedback bandwidths of 2.5 MHz, limited by the total signal latency, and we demonstrate improvements beyond the transfer function offered by the analog servo including a three-pole filter and a two-pole filter with phase compensation to suppress resonances. We also discuss limitations of our FPGA-servo implementation and general considerations when designing and using digital servos.

The performance and limitations of FPGA-based digital servos for atomic, molecular, and optical physics experiments

Science.gov (United States)

Yu, Shi Jing; Fajeau, Emma; Liu, Lin Qiao; Jones, David J.; Madison, Kirk W.

2018-02-01

In this work, we address the advantages, limitations, and technical subtleties of employing field programmable gate array (FPGA)-based digital servos for high-bandwidth feedback control of lasers in atomic, molecular, and optical physics experiments. Specifically, we provide the results of benchmark performance tests in experimental setups including noise, bandwidth, and dynamic range for two digital servos built with low and mid-range priced FPGA development platforms. The digital servo results are compared to results obtained from a commercially available state-of-the-art analog servo using the same plant for control (intensity stabilization). The digital servos have feedback bandwidths of 2.5 MHz, limited by the total signal latency, and we demonstrate improvements beyond the transfer function offered by the analog servo including a three-pole filter and a two-pole filter with phase compensation to suppress resonances. We also discuss limitations of our FPGA-servo implementation and general considerations when designing and using digital servos.

FPGA and optical-network-based LLRF distributed control system for TESLA-XFEL linear accelerator

Science.gov (United States)

Pozniak, Krzysztof T.; Romaniuk, Ryszard S.; Czarski, Tomasz; Giergusiewicz, Wojciech; Jalmuzna, Wojciech; Olowski, Krysztof; Perkuszewski, Karol; Zielinski, Jerzy; Simrock, Stefan

2005-02-01

The work presents a structural and functional model of a distributed low level radio frequency (LLRF) control system for the TESLA-XFEL accelerator. The design of a system basing on the FPGA chips and multi-gigabit optical network was debated. The system design approach was fully parametric. The major emphasis is put on the methods of the functional and hardware concentration to use fully both: a very big transmission capacity of the optical fiber telemetric channels and very big processing power of the latest series of the, DSP enhanced and optical I/O equipped, FPGA chips. The subject of the work is the design of a universal, laboratory module of the LLRF sub-system. Initial parameters of the system model under the design are presented.

Area overhead analysis of SEF: A design methodology for tolerating SEU

International Nuclear Information System (INIS)

Blaquiere, Y.; Savaria, Y.

1987-01-01

Soft-Error filtering (SEF) is a design methodology proposed recently for implementing machines tolerant to SEU. This paper deals mainly with the evaluation and the reduction of the area overhead brought by SEF. A new shift register filtering latch configuration is proposed. The use of this latch, optimized for minimum area, reduces the area overhead by a factor of 2.6, when compared with latches optimized for time performance. A detailed analysis of the area overhead with SEF implemented on two relatively complex machines produced the following results: a SEF version of the 6800 microprocessor would require an area overhead varying between 12% and 69% depending on the SEF latch used and, a SEF version of the RISCII microprocessor would result in a 38.8% area overhead. An analysis of the cost of implementing the Hamming error correcting code on a register array is presented and this cost is compared with that of implementing SEU tolerance directly with SEF. Finally, a hybrid approach is proposed where a large register array is protected by an error correcting code whereas the isolated latches are replaced by filtering latches. This hybrid approach reduces the area overhead to 18.8% for the RISCII architecture

Research and Implementation of Automatic Fuzzy Garage Parking System Based on FPGA

OpenAIRE

Wang Kaiyu; Yu Zongmin; Guan Sanghai; Yang Xing; Sheng Menglin; Tang Zhenan

2016-01-01

Because of many common scenes of reverse parking in real life, this paper presents a fuzzy controller which accommodates front and back adjustment of vehicle’s body attitude, and based on chaotic-genetic arithmetic to optimize the membership function of this controller, and get a vertical parking fuzzy controller whose simulation result is good .The paper makes the hardware-software embedded design for system based on Field-Programmable Gate Array (FPGA), and set up a 1:10 verification platfo...

FPGA Based Low Power Router Design Using High Speed Transeceiver Logic IO Standard

DEFF Research Database (Denmark)

Thind, Vandana; Hussain, Dil muhammed Akbar

2015-01-01

and information. Router is main component of computer networks is an intelligent device uses to transfer data packets between various computer networks. Router must consume low power to perform its work in an efficient manner. To achieve the same the work has been done to make a FPGA based low power design using...

BJT detector with FPGA-based read-out for alpha particle monitoring

International Nuclear Information System (INIS)

Tyzhnevyi, V; Dalla Betta, G-F; Rovati, L; Verzellesi, G; Zorzi, N

2011-01-01

In this work we introduce a new prototype of readout electronics (ALPHADET), which was designed for an α-particle detection system based on a bipolar junction transistor (BJT) detector. The system uses an FPGA, which provides many advantages at the stage of prototyping and testing the detector. The main design and electrical features of the board are discussed in this paper, along with selected results from the characterization of ALPHADET coupled to BJT detectors.

BJT detector with FPGA-based read-out for alpha particle monitoring

Energy Technology Data Exchange (ETDEWEB)

Tyzhnevyi, V; Dalla Betta, G-F [Universita di Trento, via Sommarive, 14, 38123 Trento (Italy); Rovati, L [Universita di Modena e Reggio Emilia, via Vignolese 905, 41125 Modena (Italy); Verzellesi, G [Universita di Modena e Reggio Emilia, via Amendola 2, Pad. Morselli, 42100 Reggio Emilia (Italy); Zorzi, N, E-mail: tyzhnevyi@disi.unitn.it [Fondazione Bruno Kessler, via Sommarive, 18, 38123 Trento (Italy)

2011-01-15

In this work we introduce a new prototype of readout electronics (ALPHADET), which was designed for an {alpha}-particle detection system based on a bipolar junction transistor (BJT) detector. The system uses an FPGA, which provides many advantages at the stage of prototyping and testing the detector. The main design and electrical features of the board are discussed in this paper, along with selected results from the characterization of ALPHADET coupled to BJT detectors.

FPGA-based electrocardiography (ECG signal analysis system using least-square linear phase finite impulse response (FIR filter

Directory of Open Access Journals (Sweden)

Mohamed G. Egila

2016-12-01

Full Text Available This paper presents a proposed design for analyzing electrocardiography (ECG signals. This methodology employs highpass least-square linear phase Finite Impulse Response (FIR filtering technique to filter out the baseline wander noise embedded in the input ECG signal to the system. Discrete Wavelet Transform (DWT was utilized as a feature extraction methodology to extract the reduced feature set from the input ECG signal. The design uses back propagation neural network classifier to classify the input ECG signal. The system is implemented on Xilinx 3AN-XC3S700AN Field Programming Gate Array (FPGA board. A system simulation has been done. The design is compared with some other designs achieving total accuracy of 97.8%, and achieving reduction in utilizing resources on FPGA implementation.

Power Analysis of Energy Efficient DES Algorithm and Implementation on 28nm FPGA

DEFF Research Database (Denmark)

Thind, Vandana; Pandey, Bishwajeet; Hussain, Dil muhammed Akbar

2016-01-01

In this work, we have done power analysis ofData Encryption Standard (DES) algorithm using Xilinx ISE software development kit. We have analyzed the amount of power utilized by selective components on board i.e., FPGA Artix-7, where DES algorithm is implemented. The components taken into consider......In this work, we have done power analysis ofData Encryption Standard (DES) algorithm using Xilinx ISE software development kit. We have analyzed the amount of power utilized by selective components on board i.e., FPGA Artix-7, where DES algorithm is implemented. The components taken...... into consideration areclock power, logic power, signals power, IOs power, leakage powerand supply power (dynamic and quiescent). We have used four different WLAN frequencies (2.4 GHz, 3.6 GHz, 4.9GHz, and 5.9 GHz) and four different IO standards like HSTL-I, HSTL-II, HSTL-II-18, HSTL-I-18 for power analysis. We have...... achieved13-47% saving in power at different frequencies and withdifferent energy efficient HSTL IO standard. We calculated the percentage change in the IO power with respect to the mean values of IO power at four different frequencies. We notified that there is minimum of -37.5% and maximum of +35...

Design of FPGA based high-speed data acquisition and real-time data processing system on J-TEXT tokamak

International Nuclear Information System (INIS)

Zheng, W.; Liu, R.; Zhang, M.; Zhuang, G.; Yuan, T.

2014-01-01

Highlights: • It is a data acquisition system for polarimeter–interferometer diagnostic on J-TEXT tokamak based on FPGA and PXIe devices. • The system provides a powerful data acquisition and real-time data processing performance. • Users can implement different data processing applications on the FPGA in a short time. • This system supports EPICS and has been integrated into the J-TEXT CODAC system. - Abstract: Tokamak experiment requires high-speed data acquisition and processing systems. In traditional data acquisition system, the sampling rate, channel numbers and processing speed are limited by bus throughput and CPU speed. This paper presents a data acquisition and processing system based on FPGA. The data can be processed in real-time before it is passed to the CPU. It provides processing ability for more channels with higher sampling rates than the traditional data acquisition system while ensuring deterministic real-time performance. A working prototype is developed for the newly built polarimeter–interferometer diagnostic system on the Joint Texas Experimental Tokamak (J-TEXT). It provides 16 channels with 120 MHz maximum sampling rate and 16 bit resolution. The onboard FPGA is able to calculate the plasma electron density and Faraday rotation angel. A RAID 5 storage device is adopted providing 700 MB/s read–write speed to buffer the data to the hard disk continuously for better performance

A 32-channel 840Msps TDC based on Altera Cyclone III FPGA

International Nuclear Information System (INIS)

Grigoriev, D.N.; Kasyanenko, P.V.; Kravchenko, E.A.; Shamov, A.G.; Talyshev, A.A.

2017-01-01

In this work we present a newly developed TDC (Time-to-Digital Converter) board in the VME-32 standard. The 32-channel TDC board is based on a single FPGA Altera Cyclone III chip. The main parameters of the TDC are as follows: a resolution of 1.19 ns, a dead time of 4.76 ns, and a maximal time interval of 19 504 ns.

An FPGA-Based Quantum Computing Emulation Framework Based on Serial-Parallel Architecture

Directory of Open Access Journals (Sweden)

Y. H. Lee

2016-01-01

Full Text Available Hardware emulation of quantum systems can mimic more efficiently the parallel behaviour of quantum computations, thus allowing higher processing speed-up than software simulations. In this paper, an efficient hardware emulation method that employs a serial-parallel hardware architecture targeted for field programmable gate array (FPGA is proposed. Quantum Fourier transform and Grover’s search are chosen as case studies in this work since they are the core of many useful quantum algorithms. Experimental work shows that, with the proposed emulation architecture, a linear reduction in resource utilization is attained against the pipeline implementations proposed in prior works. The proposed work contributes to the formulation of a proof-of-concept baseline FPGA emulation framework with optimization on datapath designs that can be extended to emulate practical large-scale quantum circuits.

An Update on ConSys Including a New LabVIEW FPGA Based LLRF System

DEFF Research Database (Denmark)

Worm, Torben; Nielsen, Jørgen S.

. This system use a National Instruments NI-PCIe7852R DAQ card, which includes an on-board FPGA and are hosted in a standard PC. The fast (50 kHz) amplitude loop has been implemented on the FPGA, whereas the slower tuning and phase loops are implemented in the real-time system. An operator interface including......ConSys, the Windows based control system for ASTRID and ASTRID2, is now a mature system, having been in operation for more than 15 years. All the standard programs (Console, plots, data logging, control setting store/restore etc.) are fully general and are configured through a database or file. Con......Sys is a standard publisher/subscriber system, where all nodes can act both as client and server. One very strong feature is the easy ability to make virtual devices (devices which do not depend on hardware directly, but combine hardware parameters.) For ASTRID2 a new LabVIEW based Low-Level RF system has been made...

A Real-Time Marker-Based Visual Sensor Based on a FPGA and a Soft Core Processor.

Science.gov (United States)

Tayara, Hilal; Ham, Woonchul; Chong, Kil To

2016-12-15

This paper introduces a real-time marker-based visual sensor architecture for mobile robot localization and navigation. A hardware acceleration architecture for post video processing system was implemented on a field-programmable gate array (FPGA). The pose calculation algorithm was implemented in a System on Chip (SoC) with an Altera Nios II soft-core processor. For every frame, single pass image segmentation and Feature Accelerated Segment Test (FAST) corner detection were used for extracting the predefined markers with known geometries in FPGA. Coplanar PosIT algorithm was implemented on the Nios II soft-core processor supplied with floating point hardware for accelerating floating point operations. Trigonometric functions have been approximated using Taylor series and cubic approximation using Lagrange polynomials. Inverse square root method has been implemented for approximating square root computations. Real time results have been achieved and pixel streams have been processed on the fly without any need to buffer the input frame for further implementation.

Synthesis of blind source separation algorithms on reconfigurable FPGA platforms

Science.gov (United States)

Du, Hongtao; Qi, Hairong; Szu, Harold H.

2005-03-01

Recent advances in intelligence technology have boosted the development of micro- Unmanned Air Vehicles (UAVs) including Sliver Fox, Shadow, and Scan Eagle for various surveillance and reconnaissance applications. These affordable and reusable devices have to fit a series of size, weight, and power constraints. Cameras used on such micro-UAVs are therefore mounted directly at a fixed angle without any motion-compensated gimbals. This mounting scheme has resulted in the so-called jitter effect in which jitter is defined as sub-pixel or small amplitude vibrations. The jitter blur caused by the jitter effect needs to be corrected before any other processing algorithms can be practically applied. Jitter restoration has been solved by various optimization techniques, including Wiener approximation, maximum a-posteriori probability (MAP), etc. However, these algorithms normally assume a spatial-invariant blur model that is not the case with jitter blur. Szu et al. developed a smart real-time algorithm based on auto-regression (AR) with its natural generalization of unsupervised artificial neural network (ANN) learning to achieve restoration accuracy at the sub-pixel level. This algorithm resembles the capability of the human visual system, in which an agreement between the pair of eyes indicates "signal", otherwise, the jitter noise. Using this non-statistical method, for each single pixel, a deterministic blind sources separation (BSS) process can then be carried out independently based on a deterministic minimum of the Helmholtz free energy with a generalization of Shannon's information theory applied to open dynamic systems. From a hardware implementation point of view, the process of jitter restoration of an image using Szu's algorithm can be optimized by pixel-based parallelization. In our previous work, a parallelly structured independent component analysis (ICA) algorithm has been implemented on both Field Programmable Gate Array (FPGA) and Application

FAS: Using FPGA to Accelerate and Secure SDN Software Switches

Directory of Open Access Journals (Sweden)

Wenwen Fu

2018-01-01

Full Text Available Software-Defined Networking (SDN promises the vision of more flexible and manageable networks but requires certain level of programmability in the data plane to accommodate different forwarding abstractions. SDN software switches running on commodity multicore platforms are programmable and are with low deployment cost. However, the performance of SDN software switches is not satisfactory due to the complex forwarding operations on packets. Moreover, this may hinder the performance of real-time security on software switch. In this paper, we analyze the forwarding procedure and identify the performance bottleneck of SDN software switches. An FPGA-based mechanism for accelerating and securing SDN switches, named FAS (FPGA-Accelerated SDN software switch, is proposed to take advantage of the reconfigurability and high-performance advantages of FPGA. FAS improves the performance as well as the capacity against malicious traffic attacks of SDN software switches by offloading some functional modules. We validate FAS on an FPGA-based network processing platform. Experiment results demonstrate that the forwarding rate of FAS can be 44% higher than the original SDN software switch. In addition, FAS provides new opportunity to enhance the security of SDN software switches by allowing the deployment of bump-in-the-wire security modules (such as packet detectors and filters in FPGA.

Der ATLAS LVL2-Trigger mit FPGA-Prozessoren : Entwicklung, Aufbau und Funktionsnachweis des hybriden FPGA/CPU-basierten Prozessorsystems ATLANTIS

CERN Document Server

Singpiel, Holger

2000-01-01

This thesis describes the conception and implementation of the hybrid FPGA/CPU based processing system ATLANTIS as trigger processor for the proposed ATLAS experiment at CERN. CompactPCI provides the close coupling of a multi FPGA system and a standard CPU. The system is scalable in computing power and flexible in use due to its partitioning into dedicated FPGA boards for computation, I/O tasks and a private communication. Main focus of the research activities based on the usage of the ATLANTIS system are two areas in the second level trigger (LVL2). First, the acceleration of time critical B physics trigger algorithms is the major aim. The execution of the full scan TRT algorithm on ATLANTIS, which has been used as a demonstrator, results in a speedup of 5.6 compared to a standard CPU. Next, the ATLANTIS system is used as a hardware platform for research work in conjunction with the ATLAS readout systems. For further studies a permanent installation of the ATLANTIS system in the LVL2 application testbed is f...

An SEU tolerant memory cell derived from fundamental studies of SEU mechanisms in SRAM

International Nuclear Information System (INIS)

Weaver, H.T.; Axness, C.L.; McBrayer, J.D.; Browning, J.S.; Fu, J.S.; Ochoa, A. Jr.; Koga, R.

1987-01-01

A new single event upset (SEU) hardening concept, an LRAM cell, is demonstrated theoretically and experimentally. Decoupling resistors in the LRAM are used only to protect against the short n-channel transient; longer persisting pulses are reduced in magnitude by a voltage divider, a basically new concept for SEU protection. In such a design, smaller resistors provide SEU tolerance, allowing higher performance, hardened memories. As basis for the LRAM idea, techniques were developed to measure time constants for ion induced voltage transients in conventional static random access memories, SRAM. Time constants of 0.8 and 6.3 nsec were measured for transients following strikes at the n- and p-channel drains, respectively - primary areas of SEU sensitivity. These data are the first transient time measurements on full memory chips and the large difference is fundamental to the LRAM concept. Test structures of the new design exhibit equivalent SEU tolerance with resistors 5-to-10 times smaller than currently used in SRAM. Our advanced transport-plus-circuit numerical simulations of the SEU process predicted this result and account for the LRAM experiments, as well as a variety of experiments on conventional SRAM

Real-Time FPGA-Based Object Tracker with Automatic Pan-Tilt Features for Smart Video Surveillance Systems

Directory of Open Access Journals (Sweden)

Sanjay Singh

2017-05-01

Full Text Available The design of smart video surveillance systems is an active research field among the computer vision community because of their ability to perform automatic scene analysis by selecting and tracking the objects of interest. In this paper, we present the design and implementation of an FPGA-based standalone working prototype system for real-time tracking of an object of interest in live video streams for such systems. In addition to real-time tracking of the object of interest, the implemented system is also capable of providing purposive automatic camera movement (pan-tilt in the direction determined by movement of the tracked object. The complete system, including camera interface, DDR2 external memory interface controller, designed object tracking VLSI architecture, camera movement controller and display interface, has been implemented on the Xilinx ML510 (Virtex-5 FX130T FPGA Board. Our proposed, designed and implemented system robustly tracks the target object present in the scene in real time for standard PAL (720 × 576 resolution color video and automatically controls camera movement in the direction determined by the movement of the tracked object.

A FPGA Approach in a Motorised Linear Stage Remote Controlled Experiment

Directory of Open Access Journals (Sweden)

Stamen Gadzhanov

2013-04-01

Full Text Available In recent years, an advanced motion control software for rapid development has been introduced by National Instruments, accompanied by innovative and improved FPGA-based hardware platforms. Compared to the well-known standard NI DAQ PCI/USB board solutions, this new approach offers robust stability in a deterministic real-time environment combined with the highest possible performance and re-configurability of the FPGA core. The NI Compact RIO (cRIO Real Time Controller utilises two distinctive interface modes of functionality: Scan and FPGA modes. This paper presents an application of a motion control flexible workbench based on the FPGA module, and analyses the advantages and disadvantages in comparison to another approach - the LabVIEW NI SoftMotion module run in scan interface mode. The workbench replicates real industrial applications and is very useful for experimentation with Brushless DC/ Permanent Magnet Synchronous motors and drives, and feedback devices.

Modular and reconfigurable common PCB-platform of FPGA based LLRF control system for TESLA test facility

Energy Technology Data Exchange (ETDEWEB)

Pozniak, K.T.; Romaniuk, R.S. [Institute of Electronic Systems, Warsaw (Poland); Kierzkowski, K. [Institute of Experimental Physics, Warsaw (Poland)

2005-07-01

The paper includes a description of predicted functionalities to be implemented in a universal motherboard (MB) for the next generation of LLRF control system for TESLA. The motherboard bases on a number of quasi-autonomous embedded executive modules. The modules are implemented in a few FPGA chips featured by the MB. The paper presents a practical design of the MB. The initial (basic) solution of the MB has the Cyclone as the chip where the board management is embedded. The board features communication modules - VME and micro, single chip PC with Ethernet. The board provides power supply for the FPGA chips. The board has fast internal communication between particular modules. (orig.)

Modular and reconfigurable common PCB-platform of FPGA based LLRF control system for TESLA test facility

International Nuclear Information System (INIS)

Pozniak, K.T.; Romaniuk, R.S.; Kierzkowski, K.

2005-01-01

The paper includes a description of predicted functionalities to be implemented in a universal motherboard (MB) for the next generation of LLRF control system for TESLA. The motherboard bases on a number of quasi-autonomous embedded executive modules. The modules are implemented in a few FPGA chips featured by the MB. The paper presents a practical design of the MB. The initial (basic) solution of the MB has the Cyclone as the chip where the board management is embedded. The board features communication modules - VME and micro, single chip PC with Ethernet. The board provides power supply for the FPGA chips. The board has fast internal communication between particular modules. (orig.)

Evaluation of the OpenCL AES Kernel using the Intel FPGA SDK for OpenCL

Energy Technology Data Exchange (ETDEWEB)

Jin, Zheming [Argonne National Lab. (ANL), Argonne, IL (United States); Yoshii, Kazutomo [Argonne National Lab. (ANL), Argonne, IL (United States); Finkel, Hal [Argonne National Lab. (ANL), Argonne, IL (United States); Cappello, Franck [Argonne National Lab. (ANL), Argonne, IL (United States)

2017-04-20

The OpenCL standard is an open programming model for accelerating algorithms on heterogeneous computing system. OpenCL extends the C-based programming language for developing portable codes on different platforms such as CPU, Graphics processing units (GPUs), Digital Signal Processors (DSPs) and Field Programmable Gate Arrays (FPGAs). The Intel FPGA SDK for OpenCL is a suite of tools that allows developers to abstract away the complex FPGA-based development flow for a high-level software development flow. Users can focus on the design of hardware-accelerated kernel functions in OpenCL and then direct the tools to generate the low-level FPGA implementations. The approach makes the FPGA-based development more accessible to software users as the needs for hybrid computing using CPUs and FPGAs are increasing. It can also significantly reduce the hardware development time as users can evaluate different ideas with high-level language without deep FPGA domain knowledge. In this report, we evaluate the performance of the kernel using the Intel FPGA SDK for OpenCL and Nallatech 385A FPGA board. Compared to the M506 module, the board provides more hardware resources for a larger design exploration space. The kernel performance is measured with the compute kernel throughput, an upper bound to the FPGA throughput. The report presents the experimental results in details. The Appendix lists the kernel source code.

DSP+FPGA-based real-time histogram equalization system of infrared image

Science.gov (United States)

Gu, Dongsheng; Yang, Nansheng; Pi, Defu; Hua, Min; Shen, Xiaoyan; Zhang, Ruolan

2001-10-01

Histogram Modification is a simple but effective method to enhance an infrared image. There are several methods to equalize an infrared image's histogram due to the different characteristics of the different infrared images, such as the traditional HE (Histogram Equalization) method, and the improved HP (Histogram Projection) and PE (Plateau Equalization) method and so on. If to realize these methods in a single system, the system must have a mass of memory and extremely fast speed. In our system, we introduce a DSP + FPGA based real-time procession technology to do these things together. FPGA is used to realize the common part of these methods while DSP is to do the different part. The choice of methods and the parameter can be input by a keyboard or a computer. By this means, the function of the system is powerful while it is easy to operate and maintain. In this article, we give out the diagram of the system and the soft flow chart of the methods. And at the end of it, we give out the infrared image and its histogram before and after the process of HE method.

FPGA-based calibration and monitoring system for the HADES electromagnetic calorimeter

Energy Technology Data Exchange (ETDEWEB)

Lai, Alessandra [University of Turin (Italy); GSI Helmholtzzentrum fuer Schwerionenforschung, Darmstadt (Germany); Collaboration: HADES-Collaboration

2015-07-01

The High Acceptance Di-Electron Spectrometer (HADES) at GSI was designed to measure dileptons and strangeness in elementary and heavy-ion collisions. An upgrade of HADES with an Electromagnetic Calorimeter (ECAL) has started and will be ready for beam in 2017. The goal is to measure π{sup 0} and η meson yields together with the dielectron data in pion and proton-induced reactions as well as in heavy ion collisions. Moreover, photon measurement is important for Λ{sup 0} (1405) and Σ{sup 0} (1385) spectroscopy. It is essential to precisely calibrate all the lead-glass crystal modules individually in order to achieve the required ECAL performances. Continuous monitoring with a light pulser system is required. It is foreseen to use blue light from an LED source, driven by short signals from a flexible pulse generator and distributed with optical fibers to each module of the ECAL. Due to their great flexibility, Field Programmable Gate Arrays (FPGA) have been chosen to implement the mentioned monitoring system. In this contribution an FPGA-based calibration system for commissioning as well as long term stability of the ECAL modules are presented.

Implementation of FPGA-Based Diverse Protection System

International Nuclear Information System (INIS)

Hwang, Soo Yun; Lee, Yoon Hee; Shon, Se Do; Baek, Seung Min

2015-01-01

Obsolete analog and digital hardware platforms in NPPs are commonly replaced with programmable logic controller (PLC) and distributed control system (DCS). Field programmable gate arrays (FPGAs) are highlighted as an alternative to obsolete hardware platforms. FPGAs are digital integrated circuits (ICs) that contain the configurable (programmable) blocks of logic along with configurable interconnections among these blocks. Designers can configure (program) such devices to perform a tremendous variety of tasks. FPGAs have been evolved from the technology of programmable logic device (PLD). Nowadays, they can contain millions of logic gates by nanotechnology and can be used to implement extremely large and complex functions that previously could be realized only using application specific integrated circuits (ASICs). This paper presents the implementation of an FPGA-based diverse protection system (DPS) which executes the protective functions in NPP when the protective functions of the plant protection system (PPS) fails

Implementation of FPGA-Based Diverse Protection System

Energy Technology Data Exchange (ETDEWEB)

Hwang, Soo Yun; Lee, Yoon Hee; Shon, Se Do; Baek, Seung Min [KEPCO Engineering and Construction Company Inc., Daejeon (Korea, Republic of)

2015-10-15

Obsolete analog and digital hardware platforms in NPPs are commonly replaced with programmable logic controller (PLC) and distributed control system (DCS). Field programmable gate arrays (FPGAs) are highlighted as an alternative to obsolete hardware platforms. FPGAs are digital integrated circuits (ICs) that contain the configurable (programmable) blocks of logic along with configurable interconnections among these blocks. Designers can configure (program) such devices to perform a tremendous variety of tasks. FPGAs have been evolved from the technology of programmable logic device (PLD). Nowadays, they can contain millions of logic gates by nanotechnology and can be used to implement extremely large and complex functions that previously could be realized only using application specific integrated circuits (ASICs). This paper presents the implementation of an FPGA-based diverse protection system (DPS) which executes the protective functions in NPP when the protective functions of the plant protection system (PPS) fails.

FPGA-based fully digital fast power switch fault detection and compensation for three-phase shunt active filters

Energy Technology Data Exchange (ETDEWEB)

Karimi, S.; Saadate, S. [Groupe de Recherche en Electrotechnique et Electronique de Nancy, GREEN-UHP, CNRS UMR 7037 (France); Poure, P. [Laboratoire d' Instrumentation Electronique de Nancy, LIEN, EA 3440, France Nancy Universite - Universite Henri Poincare de Nancy I, BP 239, 54506 Vandoeuvre les Nancy cedex (France)

2008-11-15

This paper discusses the design, implementation, experimental validation and performances of a fully digital fast power switch fault detection and compensation for three-phase shunt active power filters. The approach introduced in this paper minimizes the time interval between the fault occurrence and its diagnosis. This paper demonstrates the possibility to detect a faulty switch of the active filter in less than 10 {mu}s by using simultaneously a ''time criterion'' and a ''voltage criterion''. In order to attain this fast detection time a FPGA (Field Programmable Gate Array) is used. The other feature introduced in this approach is that the control scheme used to compensate the current load harmonics and fault tolerant scheme are both programmed in only one FPGA. ''FPGA in the loop'' prototyping results and fully experimental results based on a real active power filter verify satisfactory performances of the proposed method. (author)

Uranus: a rapid prototyping tool for FPGA embedded computer vision

Science.gov (United States)

Rosales-Hernández, Victor; Castillo-Jimenez, Liz; Viveros-Velez, Gilberto; Zuñiga-Grajeda, Virgilio; Treviño Torres, Abel; Arias-Estrada, M.

2007-01-01

The starting point for all successful system development is the simulation. Performing high level simulation of a system can help to identify, insolate and fix design problems. This work presents Uranus, a software tool for simulation and evaluation of image processing algorithms with support to migrate them to an FPGA environment for algorithm acceleration and embedded processes purposes. The tool includes an integrated library of previous coded operators in software and provides the necessary support to read and display image sequences as well as video files. The user can use the previous compiled soft-operators in a high level process chain, and code his own operators. Additional to the prototyping tool, Uranus offers FPGA-based hardware architecture with the same organization as the software prototyping part. The hardware architecture contains a library of FPGA IP cores for image processing that are connected with a PowerPC based system. The Uranus environment is intended for rapid prototyping of machine vision and the migration to FPGA accelerator platform, and it is distributed for academic purposes.

Commissioning of FPGA-based Transverse and Longitudinal Bunch-by-Bunch Feedback System for the TLS

International Nuclear Information System (INIS)

Hu, K. H.; Kuo, C. H.; Lau, W. K.; Yeh, M. S.; Hsu, S. Y.; Chou, P. J.; Wang, M. H.; Lee, Demi; Chen, Jenny; Wang, C. J.; Hsu, K. T.; Kobayashi, K.; Nakamura, T.; Dehler, M.

2006-01-01

Multi-bunch instabilities deteriorate beam quality, increasing beam emittance, or even causing beam loss in the synchrotron light source. The feedback system is essential to suppress multi-bunch instabilities caused by the impedances of beam ducts, and trapped ions. A new FPGA based transverse and longitudinal bunch-by-bunch feedback system have been commissioned at the Taiwan Light Source recently, A single feedback loop is used to simultaneously suppress the horizontal and the vertical multi-bunch instabilities. Longitudinal instabilities caused by cavity-like structures are suppressed by the longitudinal feedback loop. The same FPGA processor is employed in the transverse feedback and the longitudinal feedback system respectively. Diagnostic memory is included in the system to capture the bunch oscillation signal, which supports various studies

High performance image acquisition and processing architecture for fast plant system controllers based on FPGA and GPU

International Nuclear Information System (INIS)

Nieto, J.; Sanz, D.; Guillén, P.; Esquembri, S.; Arcas, G. de; Ruiz, M.; Vega, J.; Castro, R.

2016-01-01

Highlights: • To test an image acquisition and processing system for Camera Link devices based in a FPGA, compliant with ITER fast controllers. • To move data acquired from the set NI1483-NIPXIe7966R directly to a NVIDIA GPU using NVIDIA GPUDirect RDMA technology. • To obtain a methodology to include GPUs processing in ITER Fast Plant Controllers, using EPICS integration through Nominal Device Support (NDS). - Abstract: The two dominant technologies that are being used in real time image processing are Field Programmable Gate Array (FPGA) and Graphical Processor Unit (GPU) due to their algorithm parallelization capabilities. But not much work has been done to standardize how these technologies can be integrated in data acquisition systems, where control and supervisory requirements are in place, such as ITER (International Thermonuclear Experimental Reactor). This work proposes an architecture, and a development methodology, to develop image acquisition and processing systems based on FPGAs and GPUs compliant with ITER fast controller solutions. A use case based on a Camera Link device connected to an FPGA DAQ device (National Instruments FlexRIO technology), and a NVIDIA Tesla GPU series card has been developed and tested. The architecture proposed has been designed to optimize system performance by minimizing data transfer operations and CPU intervention thanks to the use of NVIDIA GPUDirect RDMA and DMA technologies. This allows moving the data directly between the different hardware elements (FPGA DAQ-GPU-CPU) avoiding CPU intervention and therefore the use of intermediate CPU memory buffers. A special effort has been put to provide a development methodology that, maintaining the highest possible abstraction from the low level implementation details, allows obtaining solutions that conform to CODAC Core System standards by providing EPICS and Nominal Device Support.

High performance image acquisition and processing architecture for fast plant system controllers based on FPGA and GPU

Energy Technology Data Exchange (ETDEWEB)

Nieto, J., E-mail: jnieto@sec.upm.es [Grupo de Investigación en Instrumentación y Acústica Aplicada, Universidad Politécnica de Madrid, Crta. Valencia Km-7, Madrid 28031 (Spain); Sanz, D.; Guillén, P.; Esquembri, S.; Arcas, G. de; Ruiz, M. [Grupo de Investigación en Instrumentación y Acústica Aplicada, Universidad Politécnica de Madrid, Crta. Valencia Km-7, Madrid 28031 (Spain); Vega, J.; Castro, R. [Asociación EURATOM/CIEMAT para Fusión, Madrid (Spain)

2016-11-15

Highlights: • To test an image acquisition and processing system for Camera Link devices based in a FPGA, compliant with ITER fast controllers. • To move data acquired from the set NI1483-NIPXIe7966R directly to a NVIDIA GPU using NVIDIA GPUDirect RDMA technology. • To obtain a methodology to include GPUs processing in ITER Fast Plant Controllers, using EPICS integration through Nominal Device Support (NDS). - Abstract: The two dominant technologies that are being used in real time image processing are Field Programmable Gate Array (FPGA) and Graphical Processor Unit (GPU) due to their algorithm parallelization capabilities. But not much work has been done to standardize how these technologies can be integrated in data acquisition systems, where control and supervisory requirements are in place, such as ITER (International Thermonuclear Experimental Reactor). This work proposes an architecture, and a development methodology, to develop image acquisition and processing systems based on FPGAs and GPUs compliant with ITER fast controller solutions. A use case based on a Camera Link device connected to an FPGA DAQ device (National Instruments FlexRIO technology), and a NVIDIA Tesla GPU series card has been developed and tested. The architecture proposed has been designed to optimize system performance by minimizing data transfer operations and CPU intervention thanks to the use of NVIDIA GPUDirect RDMA and DMA technologies. This allows moving the data directly between the different hardware elements (FPGA DAQ-GPU-CPU) avoiding CPU intervention and therefore the use of intermediate CPU memory buffers. A special effort has been put to provide a development methodology that, maintaining the highest possible abstraction from the low level implementation details, allows obtaining solutions that conform to CODAC Core System standards by providing EPICS and Nominal Device Support.

A low-power wave union TDC implemented in FPGA

International Nuclear Information System (INIS)

Wu, Jinyuan; Shi, Yanchen; Zhu, Douglas

2011-01-01

A low-power time-to-digital convertor (TDC) for an application inside a vacuum has been implemented based on the Wave Union TDC scheme in a low-cost field programmable gate array (FPGA) device. Bench top tests have shown that a time measurement resolution better than 30 ps (standard deviation of time differences between two channels) is achieved. Special firmware design practices are taken to reduce power consumption. The measurements indicate that with 32 channels fitting in the FPGA device, the power consumption on the FPGA core voltage is approximately 9.3 mW/channel and the total power consumption including both core and I/O banks is less than 27 mW/channel.

Multichannel FPGA-Based Data-Acquisition-System for Time-Resolved Synchrotron Radiation Experiments

Science.gov (United States)

Choe, Hyeokmin; Gorfman, Semen; Heidbrink, Stefan; Pietsch, Ullrich; Vogt, Marco; Winter, Jens; Ziolkowski, Michael

2017-06-01

The aim of this contribution is to describe our recent development of a novel compact field-programmable gatearray (FPGA)-based data acquisition (DAQ) system for use with multichannel X-ray detectors at synchrotron radiation facilities. The system is designed for time resolved counting of single photons arriving from several-currently 12-independent detector channels simultaneously. Detector signals of at least 2.8 ns duration are latched by asynchronous logic and then synchronized with the system clock of 100 MHz. The incoming signals are subsequently sorted out into 10 000 time-bins where they are counted. This occurs according to the arrival time of photons with respect to the trigger signal. Repeatable mode of triggered operation is used to achieve high statistic of accumulated counts. The time-bin width is adjustable from 10 ns to 1 ms. In addition, a special mode of operation with 2 ns time resolution is provided for two detector channels. The system is implemented in a pocketsize FPGA-based hardware of 10 cm × 10 cm × 3 cm and thus can easily be transported between synchrotron radiation facilities. For setup of operation and data read-out, the hardware is connected via USB interface to a portable control computer. DAQ applications are provided in both LabVIEW and MATLAB environments.

FPGA implementation of ICA algorithm for blind signal separation and adaptive noise canceling.

Science.gov (United States)

Kim, Chang-Min; Park, Hyung-Min; Kim, Taesu; Choi, Yoon-Kyung; Lee, Soo-Young

2003-01-01

An field programmable gate array (FPGA) implementation of independent component analysis (ICA) algorithm is reported for blind signal separation (BSS) and adaptive noise canceling (ANC) in real time. In order to provide enormous computing power for ICA-based algorithms with multipath reverberation, a special digital processor is designed and implemented in FPGA. The chip design fully utilizes modular concept and several chips may be put together for complex applications with a large number of noise sources. Experimental results with a fabricated test board are reported for ANC only, BSS only, and simultaneous ANC/BSS, which demonstrates successful speech enhancement in real environments in real time.

Using Pipelined XNOR Logic to Reduce SEU Risks in State Machines

Science.gov (United States)

Le, Martin; Zheng, Xin; Katanyoutant, Sunant

2008-01-01

Single-event upsets (SEUs) pose great threats to avionic systems state machine control logic, which are frequently used to control sequence of events and to qualify protocols. The risks of SEUs manifest in two ways: (a) the state machine s state information is changed, causing the state machine to unexpectedly transition to another state; (b) due to the asynchronous nature of SEU, the state machine's state registers become metastable, consequently causing any combinational logic associated with the metastable registers to malfunction temporarily. Effect (a) can be mitigated with methods such as triplemodular redundancy (TMR). However, effect (b) cannot be eliminated and can degrade the effectiveness of any mitigation method of effect (a). Although there is no way to completely eliminate the risk of SEU-induced errors, the risk can be made very small by use of a combination of very fast state-machine logic and error-detection logic. Therefore, one goal of two main elements of the present method is to design the fastest state-machine logic circuitry by basing it on the fastest generic state-machine design, which is that of a one-hot state machine. The other of the two main design elements is to design fast error-detection logic circuitry and to optimize it for implementation in a field-programmable gate array (FPGA) architecture: In the resulting design, the one-hot state machine is fitted with a multiple-input XNOR gate for detection of illegal states. The XNOR gate is implemented with lookup tables and with pipelines for high speed. In this method, the task of designing all the logic must be performed manually because no currently available logic synthesis software tool can produce optimal solutions of design problems of this type. However, some assistance is provided by a script, written for this purpose in the Python language (an object-oriented interpretive computer language) to automatically generate hardware description language (HDL) code from state

Achieving Performance Speed-up in FPGA Based Bit-Parallel Multipliers using Embedded Primitive and Macro support

Directory of Open Access Journals (Sweden)

Burhan Khurshid

2015-05-01

Full Text Available Modern Field Programmable Gate Arrays (FPGA are fast moving into the consumer market and their domain has expanded from prototype designing to low and medium volume productions. FPGAs are proving to be an attractive replacement for Application Specific Integrated Circuits (ASIC primarily because of the low Non-recurring Engineering (NRE costs associated with FPGA platforms. This has prompted FPGA vendors to improve the capacity and flexibility of the underlying primitive fabric and include specialized macro support and intellectual property (IP cores in their offerings. However, most of the work related to FPGA implementations does not take full advantage of these offerings. This is primarily because designers rely mainly on the technology-independent optimization to enhance the performance of the system and completely neglect the speed-up that is achievable using these embedded primitives and macro support. In this paper, we consider the technology-dependent optimization of fixed-point bit-parallel multipliers by carrying out their implementations using embedded primitives and macro support that are inherent in modern day FPGAs. Our implementation targets three different FPGA families viz. Spartan-6, Virtex-4 and Virtex-5. The implementation results indicate that a considerable speed up in performance is achievable using these embedded FPGA resources.

FPGA based hardware optimized implementation of signal processing system for LFM pulsed radar

Science.gov (United States)

Azim, Noor ul; Jun, Wang

2016-11-01

Signal processing is one of the main parts of any radar system. Different signal processing algorithms are used to extract information about different parameters like range, speed, direction etc, of a target in the field of radar communication. This paper presents LFM (Linear Frequency Modulation) pulsed radar signal processing algorithms which are used to improve target detection, range resolution and to estimate the speed of a target. Firstly, these algorithms are simulated in MATLAB to verify the concept and theory. After the conceptual verification in MATLAB, the simulation is converted into implementation on hardware using Xilinx FPGA. Chosen FPGA is Xilinx Virtex-6 (XC6LVX75T). For hardware implementation pipeline optimization is adopted and also other factors are considered for resources optimization in the process of implementation. Focusing algorithms in this work for improving target detection, range resolution and speed estimation are hardware optimized fast convolution processing based pulse compression and pulse Doppler processing.

FPGA-based implementation of sorting networks in MMC applications

DEFF Research Database (Denmark)

Ricco, Mattia; Máthé, Lászlo; Teodorescu, Remus

2016-01-01

, and they are usually implemented in microcontrollers or DSPs. However, they are not convenient for hardware implementation due to their inherent sequential operation. Instead, the proposed SNs, are suitable for FPGA devices thanks to their fixed parallel structure that allows improving the timing performance...

A design of high resolution one-clock-cycle TDC based on FPGA

International Nuclear Information System (INIS)

Qi Ji; Deng Zhi; Liu Yinong

2011-01-01

It describes an FPGA-based high resolution TDC. Using delay chain and Wave Union methods, this TDC has a resolution of 9 ps, which is comparable to ASIC TDC. The design uses XORs and MUXs to implement a quick 1 -cycle encoder, which reduces the dead time. Self-calibration method makes the design easy to be migrated into other FPGAs. This TDC can be used in TOF experiment, medical imaging system, etc (authors)

FPGA-based implementation of a fuzzy controller (MPPT) for photovoltaic module

International Nuclear Information System (INIS)

Messai, A.; Mellit, A.; Massi Pavan, A.; Guessoum, A.; Mekki, H.

2011-01-01

Research highlights: → FL-MPPT controller is implemented on FPGA. → Results obtained with ModelSim show a satisfactory performance. → Results will be useful for future development in PV. -- Abstract: This paper describes the hardware implementation of a two-inputs one-output digital Fuzzy Logic Controller (FLC) on a Xilinx reconfigurable Field-Programmable Gate Array (FPGA) using VHDL Hardware Description Language. The FLC is designed for seeking the maximum power point deliverable by a photovoltaic module using the measures of the photovoltaic current and voltage. The simulation results obtained with ModelSim Xilinx Edition-III show a satisfactory performance with a good agreement between the expected and the obtained values.

FPGA-based implementation of a fuzzy controller (MPPT) for photovoltaic module

Energy Technology Data Exchange (ETDEWEB)

Messai, A. [CRNB Ain Oussera, P.O. Box 180, 17200, Djelfa (Algeria); Department of Electronics, Faculty of Sciences Engineering, Blida University, Blida 90000 (Algeria); Mellit, A., E-mail: a.mellit@yahoo.co.u [Department of Electronics, Faculty of Sciences and Technology, Jijel University, Ouled-aissa, P.O. Box 98, Jijel 18000 (Algeria); Department of Electronics, Faculty of Sciences Engineering, Blida University, Blida 90000 (Algeria); Massi Pavan, A. [Department of Materials and Natural Resources, University of Trieste, Via A. Valerio, 2 - 34127 Trieste (Italy); Guessoum, A. [Department of Electronics, Faculty of Sciences Engineering, Blida University, Blida 90000 (Algeria); Mekki, H. [CRNB Ain Oussera, P.O. Box 180, 17200, Djelfa (Algeria); Department of Electronics, Faculty of Sciences Engineering, Blida University, Blida 90000 (Algeria)

2011-07-15

Research highlights: {yields} FL-MPPT controller is implemented on FPGA. {yields} Results obtained with ModelSim show a satisfactory performance. {yields} Results will be useful for future development in PV. -- Abstract: This paper describes the hardware implementation of a two-inputs one-output digital Fuzzy Logic Controller (FLC) on a Xilinx reconfigurable Field-Programmable Gate Array (FPGA) using VHDL Hardware Description Language. The FLC is designed for seeking the maximum power point deliverable by a photovoltaic module using the measures of the photovoltaic current and voltage. The simulation results obtained with ModelSim Xilinx Edition-III show a satisfactory performance with a good agreement between the expected and the obtained values.

VHDL Descriptions for the FPGA Implementation of PWL-Function-Based Multi-Scroll Chaotic Oscillators.

Directory of Open Access Journals (Sweden)

Esteban Tlelo-Cuautle

Full Text Available Nowadays, chaos generators are an attractive field for research and the challenge is their realization for the development of engineering applications. From more than three decades ago, chaotic oscillators have been designed using discrete electronic devices, very few with integrated circuit technology, and in this work we propose the use of field-programmable gate arrays (FPGAs for fast prototyping. FPGA-based applications require that one be expert on programming with very-high-speed integrated circuits hardware description language (VHDL. In this manner, we detail the VHDL descriptions of chaos generators for fast prototyping from high-level programming using Python. The cases of study are three kinds of chaos generators based on piecewise-linear (PWL functions that can be systematically augmented to generate even and odd number of scrolls. We introduce new algorithms for the VHDL description of PWL functions like saturated functions series, negative slopes and sawtooth. The generated VHDL-code is portable, reusable and open source to be synthesized in an FPGA. Finally, we show experimental results for observing 2, 10 and 30-scroll attractors.

VHDL Descriptions for the FPGA Implementation of PWL-Function-Based Multi-Scroll Chaotic Oscillators.

Science.gov (United States)

Tlelo-Cuautle, Esteban; Quintas-Valles, Antonio de Jesus; de la Fraga, Luis Gerardo; Rangel-Magdaleno, Jose de Jesus

2016-01-01

Nowadays, chaos generators are an attractive field for research and the challenge is their realization for the development of engineering applications. From more than three decades ago, chaotic oscillators have been designed using discrete electronic devices, very few with integrated circuit technology, and in this work we propose the use of field-programmable gate arrays (FPGAs) for fast prototyping. FPGA-based applications require that one be expert on programming with very-high-speed integrated circuits hardware description language (VHDL). In this manner, we detail the VHDL descriptions of chaos generators for fast prototyping from high-level programming using Python. The cases of study are three kinds of chaos generators based on piecewise-linear (PWL) functions that can be systematically augmented to generate even and odd number of scrolls. We introduce new algorithms for the VHDL description of PWL functions like saturated functions series, negative slopes and sawtooth. The generated VHDL-code is portable, reusable and open source to be synthesized in an FPGA. Finally, we show experimental results for observing 2, 10 and 30-scroll attractors.

An FPGA-based rapid prototyping platform for wavelet coprocessors

Science.gov (United States)

Vera, Alonzo; Meyer-Baese, Uwe; Pattichis, Marios

2007-04-01

MatLab/Simulink-based design flows are being used by DSP designers to improve time-to-market of FPGA implementations. 1 Commonly, digital signal processing cores are integrated in an embedded system as coprocessors. Existing CAD tools do not fully address the integration of a DSP coprocessor into an embedded system design. This integration might prove to be time consuming and error prone. It also requires that the DSP designer has an excellent knowledge of embedded systems and computer architecture details. We present a prototyping platform and design flow that allows rapid integration of embedded systems with a wavelet coprocessor. The platform comprises of software and hardware modules that allow a DSP designer a painless integration of a coprocessor with a PowerPC-based embedded system. The platform has a wide range of applications, from industrial to educational environments.

Design of the device of auto-measuring radon continuously based on FPGA

International Nuclear Information System (INIS)

Wang Yan; Shen Zhengqin; Chen Qiong

2004-01-01

This paper introduces the design of the device of auto-measuring radon continuously. The core of the system is the design of controlling system by FPGA, which consists of preset module, electrical calendar module and driving module. The system can automatically measure the consistence of the radon and the separating out rate of it. The information data is displayed by LCD. The high speed micro printer is used to print the measuring result. It adopts FPGA to design the measuring system of the device, which can improve the precision and stability of the system. (authors)

FPGA development board for applications in cosmic rays physics

International Nuclear Information System (INIS)

Angelov, Ivo; Damov, Krasimir; Dimitrova, Svetla

2013-01-01

The modern experiments in cosmic rays and particle physics are usually performed with large number of detectors and signal processing have to be done by complex electronics. The analog signals from the detectors are converted to digital (by discriminators or fast ADC) and connected to different type of logic implemented in FPGA (Field Programmable Gate Arrays). A FPGA development board based on Xilinx XC3S50AN was designed, assembled and tested. The board will be used for developing a modern registering controller (to replace the existing now) for the muon telescope in the University and can be used for other experiments in cosmic rays physics when fast digital pulses have to be processed. Keywords: FPGA, Spartan3A, muon telescope, cosmic rays variations

FPGA-based RF spectrum merging and adaptive hopset selection

Science.gov (United States)

McLean, R. K.; Flatley, B. N.; Silvius, M. D.; Hopkinson, K. M.

The radio frequency (RF) spectrum is a limited resource. Spectrum allotment disputes stem from this scarcity as many radio devices are confined to a fixed frequency or frequency sequence. One alternative is to incorporate cognition within a reconfigurable radio platform, therefore enabling the radio to adapt to dynamic RF spectrum environments. In this way, the radio is able to actively sense the RF spectrum, decide, and act accordingly, thereby sharing the spectrum and operating in more flexible manner. In this paper, we present a novel solution for merging many distributed RF spectrum maps into one map and for subsequently creating an adaptive hopset. We also provide an example of our system in operation, the result of which is a pseudorandom adaptive hopset. The paper then presents a novel hardware design for the frequency merger and adaptive hopset selector, both of which are written in VHDL and implemented as a custom IP core on an FPGA-based embedded system using the Xilinx Embedded Development Kit (EDK) software tool. The design of the custom IP core is optimized for area, and it can process a high-volume digital input via a low-latency circuit architecture. The complete embedded system includes the Xilinx PowerPC microprocessor, UART serial connection, and compact flash memory card IP cores, and our custom map merging/hopset selection IP core, all of which are targeted to the Virtex IV FPGA. This system is then incorporated into a cognitive radio prototype on a Rice University Wireless Open Access Research Platform (WARP) reconfigurable radio.

FPGA-based trigger system for the LUX dark matter experiment

Science.gov (United States)

Akerib, D. S.; Araújo, H. M.; Bai, X.; Bailey, A. J.; Balajthy, J.; Beltrame, P.; Bernard, E. P.; Bernstein, A.; Biesiadzinski, T. P.; Boulton, E. M.; Bradley, A.; Bramante, R.; Cahn, S. B.; Carmona-Benitez, M. C.; Chan, C.; Chapman, J. J.; Chiller, A. A.; Chiller, C.; Currie, A.; Cutter, J. E.; Davison, T. J. R.; de Viveiros, L.; Dobi, A.; Dobson, J. E. Y.; Druszkiewicz, E.; Edwards, B. N.; Faham, C. H.; Fiorucci, S.; Gaitskell, R. J.; Gehman, V. M.; Ghag, C.; Gibson, K. R.; Gilchriese, M. G. D.; Hall, C. R.; Hanhardt, M.; Haselschwardt, S. J.; Hertel, S. A.; Hogan, D. P.; Horn, M.; Huang, D. Q.; Ignarra, C. M.; Ihm, M.; Jacobsen, R. G.; Ji, W.; Kazkaz, K.; Khaitan, D.; Knoche, R.; Larsen, N. A.; Lee, C.; Lenardo, B. G.; Lesko, K. T.; Lindote, A.; Lopes, M. I.; Malling, D. C.; Manalaysay, A. G.; Mannino, R. L.; Marzioni, M. F.; McKinsey, D. N.; Mei, D.-M.; Mock, J.; Moongweluwan, M.; Morad, J. A.; Murphy, A. St. J.; Nehrkorn, C.; Nelson, H. N.; Neves, F.; O`Sullivan, K.; Oliver-Mallory, K. C.; Ott, R. A.; Palladino, K. J.; Pangilinan, M.; Pease, E. K.; Phelps, P.; Reichhart, L.; Rhyne, C.; Shaw, S.; Shutt, T. A.; Silva, C.; Skulski, W.; Solovov, V. N.; Sorensen, P.; Stephenson, S.; Sumner, T. J.; Szydagis, M.; Taylor, D. J.; Taylor, W.; Tennyson, B. P.; Terman, P. A.; Tiedt, D. R.; To, W. H.; Tripathi, M.; Tvrznikova, L.; Uvarov, S.; Verbus, J. R.; Webb, R. C.; White, J. T.; Whitis, T. J.; Witherell, M. S.; Wolfs, F. L. H.; Yin, J.; Young, S. K.; Zhang, C.

2016-05-01

LUX is a two-phase (liquid/gas) xenon time projection chamber designed to detect nuclear recoils resulting from interactions with dark matter particles. Signals from the detector are processed with an FPGA-based digital trigger system that analyzes the incoming data in real-time, with just a few microsecond latency. The system enables first pass selection of events of interest based on their pulse shape characteristics and 3D localization of the interactions. It has been shown to be > 99 % efficient in triggering on S2 signals induced by only few extracted liquid electrons. It is continuously and reliably operating since its full underground deployment in early 2013. This document is an overview of the systems capabilities, its inner workings, and its performance.

FPGA-based trigger system for the LUX dark matter experiment

Energy Technology Data Exchange (ETDEWEB)

Akerib, D. S.; Araújo, H. M.; Bai, X.; Bailey, A. J.; Balajthy, J.; Beltrame, P.; Bernard, E. P.; Bernstein, A.; Biesiadzinski, T. P.; Boulton, E. M.; Bradley, A.; Bramante, R.; Cahn, S. B.; Carmona-Benitez, M. C.; Chan, C.; Chapman, J. J.; Chiller, A. A.; Chiller, C.; Currie, A.; Cutter, J. E.; Davison, T. J. R.; de Viveiros, L.; Dobi, A.; Dobson, J. E. Y.; Druszkiewicz, E.; Edwards, B. N.; Faham, C. H.; Fiorucci, S.; Gaitskell, R. J.; Gehman, V. M.; Ghag, C.; Gibson, K. R.; Gilchriese, M. G. D.; Hall, C. R.; Hanhardt, M.; Haselschwardt, S. J.; Hertel, S. A.; Hogan, D. P.; Horn, M.; Huang, D. Q.; Ignarra, C. M.; Ihm, M.; Jacobsen, R. G.; Ji, W.; Kazkaz, K.; Khaitan, D.; Knoche, R.; Larsen, N. A.; Lee, C.; Lenardo, B. G.; Lesko, K. T.; Lindote, A.; Lopes, M. I.; Malling, D. C.; Manalaysay, A. G.; Mannino, R. L.; Marzioni, M. F.; McKinsey, D. N.; Mei, D. -M.; Mock, J.; Moongweluwan, M.; Morad, J. A.; Murphy, A. St. J.; Nehrkorn, C.; Nelson, H. N.; Neves, F.; O׳Sullivan, K.; Oliver-Mallory, K. C.; Ott, R. A.; Palladino, K. J.; Pangilinan, M.; Pease, E. K.; Phelps, P.; Reichhart, L.; Rhyne, C.; Shaw, S.; Shutt, T. A.; Silva, C.; Skulski, W.; Solovov, V. N.; Sorensen, P.; Stephenson, S.; Sumner, T. J.; Szydagis, M.; Taylor, D. J.; Taylor, W.; Tennyson, B. P.; Terman, P. A.; Tiedt, D. R.; To, W. H.; Tripathi, M.; Tvrznikova, L.; Uvarov, S.; Verbus, J. R.; Webb, R. C.; White, J. T.; Whitis, T. J.; Witherell, M. S.; Wolfs, F. L. H.; Yin, J.; Young, S. K.; Zhang, C.

2016-05-01

LUX is a two-phase (liquid/gas) xenon time projection chamber designed to detect nuclear recoils resulting from interactions with dark matter particles. Signals from the detector are processed with an FPGA-based digital trigger system that analyzes the incoming data in real-time, with just a few microsecond latency. The system enables first pass selection of events of interest based on their pulse shape characteristics and 3D localization of the interactions. It has been shown to be >99% efficient in triggering on S2 signals induced by only few extracted liquid electrons. It is continuously and reliably operating since its full underground deployment in early 2013. This document is an overview of the systems capabilities, its inner workings, and its performance.

Architectural design for a low cost FPGA-based traffic signal detection system in vehicles

Science.gov (United States)

López, Ignacio; Salvador, Rubén; Alarcón, Jaime; Moreno, Félix

2007-05-01

In this paper we propose an architecture for an embedded traffic signal detection system. Development of Advanced Driver Assistance Systems (ADAS) is one of the major trends of research in automotion nowadays. Examples of past and ongoing projects in the field are CHAMELEON ("Pre-Crash Application all around the vehicle" IST 1999-10108), PREVENT (Preventive and Active Safety Applications, FP6-507075, http://www.prevent-ip.org/) and AVRT in the US (Advanced Vision-Radar Threat Detection (AVRT): A Pre-Crash Detection and Active Safety System). It can be observed a major interest in systems for real-time analysis of complex driving scenarios, evaluating risk and anticipating collisions. The system will use a low cost CCD camera on the dashboard facing the road. The images will be processed by an Altera Cyclone family FPGA. The board does median and Sobel filtering of the incoming frames at PAL rate, and analyzes them for several categories of signals. The result is conveyed to the driver. The scarce resources provided by the hardware require an architecture developed for optimal use. The system will use a combination of neural networks and an adapted blackboard architecture. Several neural networks will be used in sequence for image analysis, by reconfiguring a single, generic hardware neural network in the FPGA. This generic network is optimized for speed, in order to admit several executions within the frame rate. The sequence will follow the execution cycle of the blackboard architecture. The global, blackboard architecture being developed and the hardware architecture for the generic, reconfigurable FPGA perceptron will be explained in this paper. The project is still at an early stage. However, some hardware implementation results are already available and will be offered in the paper.

Research on the design of surface acquisition system of active lap based on FPGA and FX2LP

Science.gov (United States)

Zhao, Hongshen; Li, Xiaojin; Fan, Bin; Zeng, Zhige

2014-08-01

In order to research the dynamic surface shape changes of active lap during the processing, this paper introduces a dynamic surface shape acquisition system of active lap using FPGA and USB communication. This system consists of high-precision micro-displacement sensor array, acquisition board, PC computer composition, and acquisition circuit board includes six sub-boards based on FPGA, a hub-board based on FPGA and USB communication. A sub-board is responsible for a number of independent channel sensors' data acquisition; hub-board is responsible for creating encoder simulation tools to active lap deformation control system with location information, sending synchronization information to latch the sensor data in all of the sub-boards for a time, while addressing the sub-boards to gather the sensor data in each sub-board one by one and transmitting all the sensor data together with location information via the USB chip FX2LP to the host computer. Experimental results show that the system is capable of fixing the location and speed of active lap, meanwhile the control of surface transforming and dynamic surface data acquisition at a certain location in the processing is implemented.

FPGA Implementation of Blue Whale Calls Classifier Using High-Level Programming Tool

Directory of Open Access Journals (Sweden)

Mohammed Bahoura

2016-02-01

Full Text Available In this paper, we propose a hardware-based architecture for automatic blue whale calls classification based on short-time Fourier transform and multilayer perceptron neural network. The proposed architecture is implemented on field programmable gate array (FPGA using Xilinx System Generator (XSG and the Nexys-4 Artix-7 FPGA board. This high-level programming tool allows us to design, simulate and execute the compiled design in Matlab/Simulink environment quickly and easily. Intermediate signals obtained at various steps of the proposed system are presented for typical blue whale calls. Classification performances based on the fixed-point XSG/FPGA implementation are compared to those obtained by the floating-point Matlab simulation, using a representative database of the blue whale calls.

An FPGA based Node-on-Chip Architecture, for Rapid Robotics Research

DEFF Research Database (Denmark)

Falsig, Simon; Sørensen, Anders Stengaard

2010-01-01

One of the major costs and inhibitors to practical robotics research is the time invested in design, implementation, integration, adjusting and debugging of the embedded control systems, that implement the discrete event control in experimental robots and robot systems. Usually researchers can...... with the compactness and integration associated with customized hardware. In this paper we present an FPGA based architecture and a framework of template modules for modular embedded control that has: • Dramatically reduced the time we spend on instrumentation of experimental robots. • Increased the quality...

Radiation Mitigation and Power Optimization Design Tools for Reconfigurable Hardware in Orbit

Science.gov (United States)

French, Matthew; Graham, Paul; Wirthlin, Michael; Wang, Li; Larchev, Gregory

2005-01-01

The Reconfigurable Hardware in Orbit (RHinO)project is focused on creating a set of design tools that facilitate and automate design techniques for reconfigurable computing in space, using SRAM-based field-programmable-gate-array (FPGA) technology. In the second year of the project, design tools that leverage an established FPGA design environment have been created to visualize and analyze an FPGA circuit for radiation weaknesses and power inefficiencies. For radiation, a single event Upset (SEU) emulator, persistence analysis tool, and a half-latch removal tool for Xilinx/Virtex-II devices have been created. Research is underway on a persistence mitigation tool and multiple bit upsets (MBU) studies. For power, synthesis level dynamic power visualization and analysis tools have been completed. Power optimization tools are under development and preliminary test results are positive.

On the evaluation of the sensitivity of SRAM-Based FPGA to errors due to natural radiation environment

International Nuclear Information System (INIS)

Bocquillon, Alexandre

2009-01-01

This work aims at designing a test methodology to analyze the effect of natural radiation on FPGA SRAM-based chip-sets. Study of likely errors due to single or multiple events occurring in the configuration memory will be based on fault-injection experiments performed with laser devices. It relies on both a description of scientific background and a description of complex architecture of FPGA SRAM-Based and usual testing apparatus. Fault injection experiments with laser are conducted on several classes of components in order to perform static tests of the configuration memory and identify the links with the application. It shows the organization and sensitivity of SRAM configuration cells. Criticality criteria for configuration bits have been specified following dynamic tests in protons accelerator, in regard to their impact on the application. From this classification was developed a predicting tool for critical error rate estimation. (author) [fr

A new efficient algorithmic-based SEU tolerant system architecture

International Nuclear Information System (INIS)

Blaquiere, Y.; Gagne, G.; Savaria, Y.; Evequoz, C.

1995-01-01

A new ABFT architecture is proposed to tolerate multiple SEU with low overheads. This architecture memorizes operands on a stack upon error detection and it corrects errors by recomputing. This allows uninterrupted input data stream to be processed without data loss

High Performance and Energy Efficient Traffic Light Controller Design Using FPGA

DEFF Research Database (Denmark)

Pandey, Sujeet; Shrivastav, Vivek Kumar; Sharma, Rashmi

2017-01-01

and then we have analyzed power consumption for traffic light controller on different FPGA. Leakage power is in range of 97.5-99% of total power consumption by traffic light controller on Virtex-7 FPGA. Signal power, clock power and IOs power are almost negligible. Power dissipation is measured on XPOWER......In this work, Verilog is used as hardware description language for implementation of traffic light controller. It shows Red, Green and Yellow color at a predefined interval. Technology scaling is used as energy efficient technique. We have used 90nm, 65nm, 40nm and 28nm technology based FPGA...

SEU tolerant memory design for the ATLAS pixel readout chip

International Nuclear Information System (INIS)

Menouni, M; Barbero, M; Breugnon, P; Fougeron, D; Gensolen, F; Arutinov, D; Backhaus, M; Gonella, L; Hemperek, T; Karagounis, M; Beccherle, R; Darbo, G; Caminada, L; Dube, S; Fleury, J; Garcia-Sciveres, M; Gnani, D; Jensen, F; Gromov, V; Kluit, R

2013-01-01

The FE-I4 chip for the B-layer upgrade is designed in a 130 nm CMOS process. For this design, configuration memories are based on the DICE latches where layout considerations are followed to improve the tolerance to SEU. Tests have shown that DICE latches for which layout approaches are adopted are 30 times more tolerant to SEU than the standard DICE latches. To prepare for the new pixel readout chip planned for the future upgrades, a prototype chip containing 512 pixels has been designed in a 65 nm CMOS process and a new approach is adopted for SEU tolerant latches. Results in terms of SEU and TID tolerance are presented.

Developments of FPGA-based digital back-ends for low frequency antenna arrays at Medicina radio telescopes

Science.gov (United States)

Naldi, G.; Bartolini, M.; Mattana, A.; Pupillo, G.; Hickish, J.; Foster, G.; Bianchi, G.; Lingua, A.; Monari, J.; Montebugnoli, S.; Perini, F.; Rusticelli, S.; Schiaffino, M.; Virone, G.; Zarb Adami, K.

In radio astronomy Field Programmable Gate Array (FPGA) technology is largely used for the implementation of digital signal processing techniques applied to antenna arrays. This is mainly due to the good trade-off among computing resources, power consumption and cost offered by FPGA chip compared to other technologies like ASIC, GPU and CPU. In the last years several digital backend systems based on such devices have been developed at the Medicina radio astronomical station (INAF-IRA, Bologna, Italy). Instruments like FX correlator, direct imager, beamformer, multi-beam system have been successfully designed and realized on CASPER (Collaboration for Astronomy Signal Processing and Electronics Research, https://casper.berkeley.edu) processing boards. In this paper we present the gained experience in this kind of applications.

DOOCS environment for FPGA-based cavity control system and control algorithms development

International Nuclear Information System (INIS)

Pucyk, P.; Koprek, W.; Kaleta, P.; Szewinski, J.; Pozniak, K.T.; Czarski, T.; Romaniuk, R.S.

2005-01-01

The paper describes the concept and realization of the DOOCS control software for FPGAbased TESLA cavity controller and simulator (SIMCON). It bases on universal software components, created for laboratory purposes and used in MATLAB based control environment. These modules have been recently adapted to the DOOCS environment to ensure a unified software to hardware communication model. The presented solution can be also used as a general platform for control algorithms development. The proposed interfaces between MATLAB and DOOCS modules allow to check the developed algorithm in the operation environment before implementation in the FPGA. As the examples two systems have been presented. (orig.)

Embedded 3D Graphics Core for FPGA-based System-on-Chip Applications

DEFF Research Database (Denmark)

Holten-Lund, Hans Erik

2005-01-01

This paper presents a 3D graphics accelerator core for an FPGA based system, and illustrates how to build a System-on-Chip containing a Xilinx MicroBlaze soft-core CPU and our 3D graphics accelerator core. The system is capable of running uClinux and hardware accelerated 3D graphics applications......, and the video display which periodically reads from memory to display the final rendered graphics. The graphics core uses internal scratch-pad memory to reduce its external bandwidth requirement, this is achieved by implementing a tile-based rendering algorithm. Reduced external bandwidth means that the power...

NEPP Update of Independent Single Event Upset Field Programmable Gate Array Testing

Science.gov (United States)

Berg, Melanie; Label, Kenneth; Campola, Michael; Pellish, Jonathan

2017-01-01

This presentation provides a NASA Electronic Parts and Packaging (NEPP) Program update of independent Single Event Upset (SEU) Field Programmable Gate Array (FPGA) testing including FPGA test guidelines, Microsemi RTG4 heavy-ion results, Xilinx Kintex-UltraScale heavy-ion results, Xilinx UltraScale+ single event effect (SEE) test plans, development of a new methodology for characterizing SEU system response, and NEPP involvement with FPGA security and trust.

Implementation of FPGA-based Level-1 Tracking at CMS for the HL-LHC

CERN Document Server

Chaves, Jorge Enrique

2014-01-01

A new approach for track reconstruction is presented to be used in the all-hardware first level of the CMS trigger. The application of the approach is intended for the upgraded all-silicon tracker, which is to be installed for the High Luminosity era of the LHC (HL-LHC). The upgraded LHC machine is expected to deliver a luminosity on the order of $5\\times10^{34} $cm$^{-2}$s$^{-1}$. This expected luminosity means there would be about 125 pileup events in each bunch crossing at a frequency of 40 MHz. To keep the CMS trigger rate at a manageable level under these conditions, it is necessary to make quick decisions on the events that will be processed. The timing estimates for the algorithm are expected to be below 5 $\\mu$s, well within the requirements of the L1 trigger at CMS for track identification. The algorithm is integer-based, allowing it to be implemented on an FPGA. Currently we are working on a demonstrator hardware implementation using a Xilinx Virtex 6 FPGA. Results from simulations in C++ and Verilo...

Generic FPGA-Based Platform for Distributed IO in Proton Therapy Patient Safety Interlock System

Science.gov (United States)

Eichin, Michael; Carmona, Pablo Fernandez; Johansen, Ernst; Grossmann, Martin; Mayor, Alexandre; Erhardt, Daniel; Gomperts, Alexander; Regele, Harald; Bula, Christian; Sidler, Christof

2017-06-01

At the Paul Scherrer Institute (PSI) in Switzerland, cancer patients are treated with protons. Proton therapy at PSI has a long history and started in the 1980s. More than 30 years later, a new gantry has recently been installed in the existing facility. This new machine has been delivered by an industry partner. A big challenge is the integration of the vendor's safety system into the existing PSI environment. Different interface standards and the complexity of the system made it necessary to find a technical solution connecting an industry system to the existing PSI infrastructure. A novel very flexible distributed IO system based on field-programmable gate array (FPGA) technology was developed, supporting many different IO interface standards and high-speed communication links connecting the device to a PSI standard versa module eurocard-bus input output controller. This paper summarizes the features of the hardware technology, the FPGA framework with its high-speed communication link protocol, and presents our first measurement results.

Multirate Digital Filters Based on FPGA and Its Applications

International Nuclear Information System (INIS)

Sharaf El-Din, R.M.A.

2013-01-01

Digital Signal Processing (DSP) is one of the fastest growing techniques in the electronics industry. It is used in a wide range of application fields such as, telecommunications, data communications, image enhancement and processing, video signals, digital TV broadcasting, and voice synthesis and recognition. Field Programmable Gate Array (FPGA) offers good solution for addressing the needs of high performance DSP systems. The focus of this thesis is on one of the basic DSP functions, namely filtering signals to remove unwanted frequency bands. Multi rate Digital Filters (MDFs) are the main theme here. Theory and implementation of MDF, as a special class of digital filters, will be discussed. Multi rate digital filters represent a class of digital filters having a number of attractive features like, low requirements for the coefficient word lengths, significant saving in computation and storage requirements results in a significant reduction in its dynamic power consumption. This thesis introduces an efficient FPGA realization of a multi rate decimation filter with narrow pass-band and narrow transition band to reduce the frequency sample rate by factor of 64 for noise thermometer applications. The proposed multi rate decimation filter is composed of three stages; the first stage is a Cascaded Integrator Comb (CIC) decimation filter, the second stage is a two-coefficient Half-Band (HB) filter and the last stage is a sharper transition HB filter. The frequency responses of individual stages as well as the overall filter response have been demonstrated with full simulation using MATLAB. The design and implementation of the proposed MDF on FPGA (XILINX Virtex XCV800 BG432-4), using VHSIC Hardware Description Language (VHDL), has been introduced. The implementation areas of the proposed filter stages are compared. Using CIC-HB technique saves 18% of the design area, compared to using six stages HB decimation filters.

FPGA based fast synchronous serial multi-wire links synchronization

Science.gov (United States)

Pozniak, Krzysztof T.

2013-10-01

The paper debates synchronization method of multi-wire, serial link of constant latency, by means of pseudo-random numbers generators. The solution was designed for various families of FPGA circuits. There were debated synchronization algorithm and functional structure of parameterized transmitter and receiver modules. The modules were realized in VHDL language in a behavioral form.

Energy-Efficient FPGA-Based Parallel Quasi-Stochastic Computing

Directory of Open Access Journals (Sweden)

Ramu Seva

2017-11-01

Full Text Available The high performance of FPGA (Field Programmable Gate Array in image processing applications is justified by its flexible reconfigurability, its inherent parallel nature and the availability of a large amount of internal memories. Lately, the Stochastic Computing (SC paradigm has been found to be significantly advantageous in certain application domains including image processing because of its lower hardware complexity and power consumption. However, its viability is deemed to be limited due to its serial bitstream processing and excessive run-time requirement for convergence. To address these issues, a novel approach is proposed in this work where an energy-efficient implementation of SC is accomplished by introducing fast-converging Quasi-Stochastic Number Generators (QSNGs and parallel stochastic bitstream processing, which are well suited to leverage FPGA’s reconfigurability and abundant internal memory resources. The proposed approach has been tested on the Virtex-4 FPGA, and results have been compared with the serial and parallel implementations of conventional stochastic computation using the well-known SC edge detection and multiplication circuits. Results prove that by using this approach, execution time, as well as the power consumption are decreased by a factor of 3.5 and 4.5 for the edge detection circuit and multiplication circuit, respectively.

Characterization of System Level Single Event Upset (SEU) Responses using SEU Data, Classical Reliability Models, and Space Environment Data

Science.gov (United States)

Berg, Melanie; Label, Kenneth; Campola, Michael; Xapsos, Michael

2017-01-01

We propose a method for the application of single event upset (SEU) data towards the analysis of complex systems using transformed reliability models (from the time domain to the particle fluence domain) and space environment data.

Estimation of channel impulse response and FPGA simulation

Directory of Open Access Journals (Sweden)

YU Longjie

2015-02-01

Full Text Available Wideband code division multiple access (WCDMA is a 3G wireless communication network.The common pilot channel in downlink of WCDMA provides an effective method to estimate the channel impulse response.In this paper,universal software radio peripheral (USRP is utilized to sample and process WCDMA signal which is emitted by China Unicom base station.Firstly,the received signal is pre-processed with filtering and down-sampling.Secondly,fast algorithm of WCDMA cell search is fulfilled.Thirdly,frequency shift caused by USRP′s crystal oscillator is checked and compensated.Eventually,channel impulse response is estimated.In this paper,MATLAB is used to describe the above algorithm and field programmable gate array (FPGA is used to simulate algorithm.In the process of simulation,pipeline and IP core multiplexing are introduced.In the case of 32 MHz clock frequency,FPGA simulation time is 80.861 ms.Simulation results show that FPGA is able to estimate the channel impulse response quickly and accurately with less hardware resources.

FPGA based mixed-signal circuit novel testing techniques

International Nuclear Information System (INIS)

Pouros, Sotirios; Vassios, Vassilios; Papakostas, Dimitrios; Hristov, Valentin

2013-01-01

Electronic circuits fault detection techniques, especially on modern mixed-signal circuits, are evolved and customized around the world to meet the industry needs. The paper presents techniques used on fault detection in mixed signal circuits. Moreover, the paper involves standardized methods, along with current innovations for external testing like Design for Testability (DfT) and Built In Self Test (BIST) systems. Finally, the research team introduces a circuit implementation scheme using FPGA

Use of Commercial FPGA-Based Evaluation Boards for Single-Event Testing of DDR2 and DDR3 SDRAMs

Science.gov (United States)

Ladbury, R. L.; Berg, M. D.; Wilcox, E. P.; LaBel, K. A.; Kim, H. S.; Phan, A. M.; Seidleck, C. M.

2013-01-01

We investigate the use of commercial FPGA based evaluation boards for radiation testing DDR2 and DDR3 SDRAMs. We evaluate the resulting data quality and the tradeoffs involved in the use of these boards.

Simulation of SEU transients in CMOS ICs

International Nuclear Information System (INIS)

Kaul, N.; Bhuva, B.L.; Kerns, S.E.

1991-01-01

This paper reports that available analytical models of the number of single-event-induced errors (SEU) in combinational logic systems are not easily applicable to real integrated circuits (ICs). An efficient computer simulation algorithm set, SITA, predicts the vulnerability of data stored in and processed by complex combinational logic circuits to SEU. SITA is described in detail to allow researchers to incorporate it into their error analysis packages. Required simulation algorithms are based on approximate closed-form equations modeling individual device behavior in CMOS logic units. Device-level simulation is used to estimate the probability that ion-device interactions produce erroneous signals capable of propagating to a latch (or n output node), and logic-level simulation to predict the spread of such erroneous, latched information through the IC. Simulation results are compared to those from SPICE for several circuit and logic configurations. SITA results are comparable to this established circuit-level code, and SITA can analyze circuits with state-of-the-art device densities (which SPICE cannot). At all IC complexity levels, SITAS offers several factors of 10 savings in simulation time over SPICE

A minimal SATA III Host Controller based on FPGA

Science.gov (United States)

Liu, Hailiang

2018-03-01

SATA (Serial Advanced Technology Attachment) is an advanced serial bus which has a outstanding performance in transmitting high speed real-time data applied in Personal Computers, Financial Industry, astronautics and aeronautics, etc. In this express, a minimal SATA III Host Controller based on Xilinx Kintex 7 serial FPGA is designed and implemented. Compared to the state-of-art, registers utilization are reduced 25.3% and LUTs utilization are reduced 65.9%. According to the experimental results, the controller works precisely and steady with the reading bandwidth of up to 536 MB per second and the writing bandwidth of up to 512 MB per second, both of which are close to the maximum bandwidth of the SSD(Solid State Disk) device. The host controller is very suitable for high speed data transmission and mass data storage.

Research and Implementation of Automatic Fuzzy Garage Parking System Based on FPGA

Directory of Open Access Journals (Sweden)

Wang Kaiyu

2016-01-01

Full Text Available Because of many common scenes of reverse parking in real life, this paper presents a fuzzy controller which accommodates front and back adjustment of vehicle’s body attitude, and based on chaotic-genetic arithmetic to optimize the membership function of this controller, and get a vertical parking fuzzy controller whose simulation result is good .The paper makes the hardware-software embedded design for system based on Field-Programmable Gate Array (FPGA, and set up a 1:10 verification platform of smart car to verify the fuzzy garage parking system with real car. Verification results show that, the system can complete the parking task very well.

SEU measurements on HFETS and HFET SRAMS

International Nuclear Information System (INIS)

Remke, R.L.; Witmer, S.B.; Jones, S.D.F.; Barber, F.E.; Flesner, L.D.; O'Brien, M.E.

1989-01-01

The single event upset (SEU) response of n + -AlGaAs/GaAs heterostructure field effect transistors(HFETs--also known as SDHTs, HEMTs, MODFETs, and TEGFETs) and HFET static random access memories (SRAMs) was evaluated by measuring their response to focused electron pulses. Initially, focused electron beam pulses were used to measure and model HFET drain and gate SEU responses. Circuit simulations using these SEU models predicted that an HFET memory is most vulnerable to a single particle event in the area between the drain and the source (drain hit) of the OFF pull down HFET. Subsequent testing of an HFET SRAM cell confirmed this prediction. The authors discuss how these first SEU evaluations of HFETs and HFET memories show that measurements on individual HFETs and circuit simulations of SEU hits may be used to predict the SEU response of HFET memories

FPGA-based prototype storage system with phase change memory

Science.gov (United States)

Li, Gezi; Chen, Xiaogang; Chen, Bomy; Li, Shunfen; Zhou, Mi; Han, Wenbing; Song, Zhitang

2016-10-01

With the ever-increasing amount of data being stored via social media, mobile telephony base stations, and network devices etc. the database systems face severe bandwidth bottlenecks when moving vast amounts of data from storage to the processing nodes. At the same time, Storage Class Memory (SCM) technologies such as Phase Change Memory (PCM) with unique features like fast read access, high density, non-volatility, byte-addressability, positive response to increasing temperature, superior scalability, and zero standby leakage have changed the landscape of modern computing and storage systems. In such a scenario, we present a storage system called FLEET which can off-load partial or whole SQL queries to the storage engine from CPU. FLEET uses an FPGA rather than conventional CPUs to implement the off-load engine due to its highly parallel nature. We have implemented an initial prototype of FLEET with PCM-based storage. The results demonstrate that significant performance and CPU utilization gains can be achieved by pushing selected query processing components inside in PCM-based storage.

Timing Constraints Based High Performance Des Design And Implementation On 28nm FPGA

DEFF Research Database (Denmark)

Thind, Vandana; Pandey, Sujeet; Hussain, Dil muhammed Akbar

2018-01-01

in this work, we are going to implement DES Algorithm on 28nm Artix-7 FPGA. To achieve high performance design goal, we are using minimum period, maximum frequency, minimum low pulse, minimum high pulse for different cases of worst case slack, maximum delay, setup time, hold time and data skew path....... The cases on which analysis is done are like worst case slack, best case achievable, timing error and timing score, which help in differentiating the amount of timing constraint at two different frequencies. We analyzed that in timing analysis there is maximum of 19.56% of variation in worst case slack, 0...

An FPGA-based bolometer for the MAST-U Super-X divertor

Energy Technology Data Exchange (ETDEWEB)

Lovell, Jack, E-mail: jack.lovell@durham.ac.uk [Durham University, South Road, Durham DH1 3LE (United Kingdom); Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, Oxon OX14 3DB (United Kingdom); Naylor, Graham; Field, Anthony [Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, Oxon OX14 3DB (United Kingdom); Drewelow, Peter [MPI für Plasmaphysik, Greifswald (Germany); Sharples, Ray [Durham University, South Road, Durham DH1 3LE (United Kingdom); Collaboration: EUROfusion Consortium, JET, Culham Science Centre, Abingdon OX14 3DB (United Kingdom)

2016-11-15

A new resistive bolometer system has been developed for MAST-Upgrade. It will measure radiated power in the new Super-X divertor, with millisecond time resolution, along 16 vertical and 16 horizontal lines of sight. The system uses a Xilinx Zynq-7000 series Field-Programmable Gate Array (FPGA) in the D-TACQ ACQ2106 carrier to perform real time data acquisition and signal processing. The FPGA enables AC-synchronous detection using high performance digital filtering to achieve a high signal-to-noise ratio and will be able to output processed data in real time with millisecond latency. The system has been installed on 8 previously unused channels of the JET vertical bolometer system. Initial results suggest good agreement with data from existing vertical channels but with higher bandwidth and signal-to-noise ratio.

FPGA-Based Online PQD Detection and Classification through DWT, Mathematical Morphology and SVD

Directory of Open Access Journals (Sweden)

Misael Lopez-Ramirez

2018-03-01

Full Text Available Power quality disturbances (PQD in electric distribution systems can be produced by the utilization of non-linear loads or environmental circumstances, causing electrical equipment malfunction and reduction of its useful life. Detecting and classifying different PQDs implies great efforts in planning and structuring the monitoring system. The main disadvantage of most works in the literature is that they treat a limited number of electrical disturbances through personal computer (PC-based computation techniques, which makes it difficult to perform an online PQD classification. In this work, the novel contribution is a methodology for PQD recognition and classification through discrete wavelet transform, mathematical morphology, decomposition of singular values, and statistical analysis. Furthermore, the timely and reliable classification of different disturbances is necessary; hence, a field programmable gate array (FPGA-based integrated circuit is developed to offer a portable hardware processing unit to perform fast, online PQD classification. The obtained numerical and experimental results demonstrate that the proposed method guarantees high effectiveness during online PQD detection and classification of real voltage/current signals.

OpenCL-Based FPGA Accelerator for 3D FDTD with Periodic and Absorbing Boundary Conditions

Directory of Open Access Journals (Sweden)

Hasitha Muthumala Waidyasooriya

2017-01-01

Full Text Available Finite difference time domain (FDTD method is a very poplar way of numerically solving partial differential equations. FDTD has a low operational intensity so that the performances in CPUs and GPUs are often restricted by the memory bandwidth. Recently, deeply pipelined FPGA accelerators have shown a lot of success by exploiting streaming data flows in FDTD computation. In spite of this success, many FPGA accelerators are not suitable for real-world applications that contain complex boundary conditions. Boundary conditions break the regularity of the data flow, so that the performances are significantly reduced. This paper proposes an FPGA accelerator that computes commonly used absorbing and periodic boundary conditions in many 3D FDTD applications. Accelerator is designed using a “C-like” programming language called OpenCL (open computing language. As a result, the proposed accelerator can be customized easily by changing the software code. According to the experimental results, we achieved over 3.3 times and 1.5 times higher processing speed compared to the CPUs and GPUs, respectively. Moreover, the proposed accelerator is more than 14 times faster compared to the recently proposed FPGA accelerators that are capable of handling complex boundary conditions.

Application of Integrated Verification Approach to FPGA-based Safety-Critical I and C System of Nuclear Power Plant

Energy Technology Data Exchange (ETDEWEB)

Ahmed, Ibrahim; Heo, Gyunyoung [Kyunghee Univ., Yongin (Korea, Republic of); Jung, Jaecheon [KEPCO, Ulsan (Korea, Republic of)

2016-10-15

Safety-critical instrumentation and control (I and C) system in nuclear power plant (NPP) implemented on programmable logic controllers (PLCs) plays a vital role in safe operation of the plant. The challenges such as fast obsolescence, the vulnerability to cyber-attack, and other related issues of software systems have currently led to the consideration of field programmable gate arrays (FPGAs) as an alternative to PLCs because of their advantages and hardware related benefits. Generally in FPGA design verification, the designers make use of verification techniques by writing the test benches which involved various stages of verification activities of register-transfer level (RTL), gate-level, and place and route. Writing the test benches is considerably time consuming and require a lot of efforts to achieve a satisfied desire results. Furthermore, performing the verification at each stage is a major bottleneck and demanded much activities and time. In addition, verification is conceivably, the most difficult and complicated aspect of any design. Therefore, in view of these, this work applied an integrated verification approach to the verification of FPGA-based I and C system in NPP that simultaneously verified the whole design modules using MATLAB/Simulink HDL Co-simulation models. Verification is conceivably, the most difficult and complicated aspect of any design, and an FPGA design is not an exception. Therefore, in this work, we introduced and discussed how an application of integrated verification technique to the verification and testing of FPGA-based I and C system design in NPP can facilitate the verification processes, and verify the entire design modules of the system simultaneously using MATLAB/Simulink HDL co-simulation models. In conclusion, the results showed that, the integrated verification approach through MATLAB/Simulink models, if applied to any design to be verified, could speed up the design verification and reduce the V and V tasks.

Application of Integrated Verification Approach to FPGA-based Safety-Critical I and C System of Nuclear Power Plant

International Nuclear Information System (INIS)

Ahmed, Ibrahim; Heo, Gyunyoung; Jung, Jaecheon

2016-01-01

Safety-critical instrumentation and control (I and C) system in nuclear power plant (NPP) implemented on programmable logic controllers (PLCs) plays a vital role in safe operation of the plant. The challenges such as fast obsolescence, the vulnerability to cyber-attack, and other related issues of software systems have currently led to the consideration of field programmable gate arrays (FPGAs) as an alternative to PLCs because of their advantages and hardware related benefits. Generally in FPGA design verification, the designers make use of verification techniques by writing the test benches which involved various stages of verification activities of register-transfer level (RTL), gate-level, and place and route. Writing the test benches is considerably time consuming and require a lot of efforts to achieve a satisfied desire results. Furthermore, performing the verification at each stage is a major bottleneck and demanded much activities and time. In addition, verification is conceivably, the most difficult and complicated aspect of any design. Therefore, in view of these, this work applied an integrated verification approach to the verification of FPGA-based I and C system in NPP that simultaneously verified the whole design modules using MATLAB/Simulink HDL Co-simulation models. Verification is conceivably, the most difficult and complicated aspect of any design, and an FPGA design is not an exception. Therefore, in this work, we introduced and discussed how an application of integrated verification technique to the verification and testing of FPGA-based I and C system design in NPP can facilitate the verification processes, and verify the entire design modules of the system simultaneously using MATLAB/Simulink HDL co-simulation models. In conclusion, the results showed that, the integrated verification approach through MATLAB/Simulink models, if applied to any design to be verified, could speed up the design verification and reduce the V and V tasks

Analyzing Test-As-You-Fly Single Event Upset (SEU) Responses using SEU Data, Classical Reliability Models, and Space Environment Data

Science.gov (United States)

Berg, Melanie; Label, Kenneth; Campola, Michael; Xapsos, Michael

2017-01-01

We propose a method for the application of single event upset (SEU) data towards the analysis of complex systems using transformed reliability models (from the time domain to the particle fluence domain) and space environment data.

FPGA Acceleration of the phylogenetic likelihood function for Bayesian MCMC inference methods

Directory of Open Access Journals (Sweden)

Bakos Jason D

2010-04-01

Full Text Available Abstract Background Likelihood (ML-based phylogenetic inference has become a popular method for estimating the evolutionary relationships among species based on genomic sequence data. This method is used in applications such as RAxML, GARLI, MrBayes, PAML, and PAUP. The Phylogenetic Likelihood Function (PLF is an important kernel computation for this method. The PLF consists of a loop with no conditional behavior or dependencies between iterations. As such it contains a high potential for exploiting parallelism using micro-architectural techniques. In this paper, we describe a technique for mapping the PLF and supporting logic onto a Field Programmable Gate Array (FPGA-based co-processor. By leveraging the FPGA's on-chip DSP modules and the high-bandwidth local memory attached to the FPGA, the resultant co-processor can accelerate ML-based methods and outperform state-of-the-art multi-core processors. Results We use the MrBayes 3 tool as a framework for designing our co-processor. For large datasets, we estimate that our accelerated MrBayes, if run on a current-generation FPGA, achieves a 10× speedup relative to software running on a state-of-the-art server-class microprocessor. The FPGA-based implementation achieves its performance by deeply pipelining the likelihood computations, performing multiple floating-point operations in parallel, and through a natural log approximation that is chosen specifically to leverage a deeply pipelined custom architecture. Conclusions Heterogeneous computing, which combines general-purpose processors with special-purpose co-processors such as FPGAs and GPUs, is a promising approach for high-performance phylogeny inference as shown by the growing body of literature in this field. FPGAs in particular are well-suited for this task because of their low power consumption as compared to many-core processors and Graphics Processor Units (GPUs 1.

FPGA-based implementation of a cavity field controller for FLASH and X-FEL

Science.gov (United States)

Fafara, Przemyslaw; Jalmuzna, Wojciech; Koprek, Waldemar; Pozniak, Krzysztof; Romaniuk, Ryszard; Szewinski, Jaroslaw; Cichalewski, Wojciech

2007-08-01

The subject of this paper is the design and construction of a new generation of superconducting cavity accelerator measurement and control system. The old system is based on a single digital signal processor (DSP). The new system uses a large programmable array circuit (FPGA) instead, with a multi-gigabit optical link. Both systems now work in parallel in the Free Electron Laser in Hamburg (FLASH). The differences between the systems are shown, based on the measurement results of the working machine. The major advantage of the new system is a bigger area of stability of the machine control loop.

Synchronization of faulty processors in coarse-grained TMR protected partially reconfigurable FPGA designs

International Nuclear Information System (INIS)

Kretzschmar, U.; Gomez-Cornejo, J.; Astarloa, A.; Bidarte, U.; Ser, J. Del

2016-01-01

The expansion of FPGA technology in numerous application fields is a fact. Single Event Effects (SEE) are a critical factor for the reliability of FPGA based systems. For this reason, a number of researches have been studying fault tolerance techniques to harden different elements of FPGA designs. Using Partial Reconfiguration (PR) in conjunction with Triple Modular Redundancy (TMR) is an emerging approach in recent publications dealing with the implementation of fault tolerant processors on SRAM-based FPGAs. While these works pay great attention to the repair of erroneous instances by means of reconfiguration, the essential step of synchronizing the repaired processors is insufficiently addressed. In this context, this paper poses four different synchronization approaches for soft core processors, which balance differently the trade-off between synchronization speed and hardware overhead. All approaches are assessed in practice by synchronizing TMR protected PicoBlaze processors implemented on a Virtex-5 FPGA. Nevertheless all methods are of a general nature and can be applied for different processor architectures in a straightforward fashion. - Highlights: • Four different synchronization methods for faulty processors are proposed. • The methods balance between synchronization speed and hardware overhead. • They can be applied to TMR-protected reconfigurable FPGA designs. • The proposed schemes are implemented and tested in real hardware.

FPGA Implementation of Heart Rate Monitoring System.

Science.gov (United States)

Panigrahy, D; Rakshit, M; Sahu, P K

2016-03-01

This paper describes a field programmable gate array (FPGA) implementation of a system that calculates the heart rate from Electrocardiogram (ECG) signal. After heart rate calculation, tachycardia, bradycardia or normal heart rate can easily be detected. ECG is a diagnosis tool routinely used to access the electrical activities and muscular function of the heart. Heart rate is calculated by detecting the R peaks from the ECG signal. To provide a portable and the continuous heart rate monitoring system for patients using ECG, needs a dedicated hardware. FPGA provides easy testability, allows faster implementation and verification option for implementing a new design. We have proposed a five-stage based methodology by using basic VHDL blocks like addition, multiplication and data conversion (real to the fixed point and vice-versa). Our proposed heart rate calculation (R-peak detection) method has been validated, using 48 first channel ECG records of the MIT-BIH arrhythmia database. It shows an accuracy of 99.84%, the sensitivity of 99.94% and the positive predictive value of 99.89%. Our proposed method outperforms other well-known methods in case of pathological ECG signals and successfully implemented in FPGA.

An FPGA Implementation of a Robot Control System with an Integrated 3D Vision System

Directory of Open Access Journals (Sweden)

Yi-Ting Chen

2015-05-01

Full Text Available Robot decision making and motion control are commonly based on visual information in various applications. Position-based visual servo is a technique for vision-based robot control, which operates in the 3D workspace, uses real-time image processing to perform tasks of feature extraction, and returns the pose of the object for positioning control. In order to handle the computational burden at the vision sensor feedback, we design a FPGA-based motion-vision integrated system that employs dedicated hardware circuits for processing vision processing and motion control functions. This research conducts a preliminary study to explore the integration of 3D vision and robot motion control system design based on a single field programmable gate array (FPGA chip. The implemented motion-vision embedded system performs the following functions: filtering, image statistics, binary morphology, binary object analysis, object 3D position calculation, robot inverse kinematics, velocity profile generation, feedback counting, and multiple-axes position feedback control.

The current state of FPGA technology in the nuclear domain

Energy Technology Data Exchange (ETDEWEB)

Ranta, J.

2012-07-01

Field programmable gate arrays are a form of programmable electronic device used in various applications including automation systems. In recent years, there has been a growing interest in the use of FPGA-based systems also for safety automation of nuclear power plants. The interest is driven by the need for reliable new alternatives to replace, on one hand, the aging technology currently in use and, on the other hand, microprocessor and software-based systems, which are seen as overly complex from the safety evaluation point of view. This report presents an overview of FPGA technology, including hardware aspects, the application development process, risks and advantages of the technology, and introduces some of the current systems. FPGAs contain an interesting combination of features from software-based and fully hardware-based systems. Application development has a great deal in common with software development, but the final product is a hardware component without the operating system and other platform functions on which software would execute. Currently the number of FPGA-based applications used for safety functions of nuclear power plants is rather limited, but it is growing. So far there is little experience or common solid understanding between different parties on how FPGAs should be evaluated and handled in the licensing process. (orig.)

The current state of FPGA technology in the nuclear domain

International Nuclear Information System (INIS)

Ranta, J.

2012-01-01

Field programmable gate arrays are a form of programmable electronic device used in various applications including automation systems. In recent years, there has been a growing interest in the use of FPGA-based systems also for safety automation of nuclear power plants. The interest is driven by the need for reliable new alternatives to replace, on one hand, the aging technology currently in use and, on the other hand, microprocessor and software-based systems, which are seen as overly complex from the safety evaluation point of view. This report presents an overview of FPGA technology, including hardware aspects, the application development process, risks and advantages of the technology, and introduces some of the current systems. FPGAs contain an interesting combination of features from software-based and fully hardware-based systems. Application development has a great deal in common with software development, but the final product is a hardware component without the operating system and other platform functions on which software would execute. Currently the number of FPGA-based applications used for safety functions of nuclear power plants is rather limited, but it is growing. So far there is little experience or common solid understanding between different parties on how FPGAs should be evaluated and handled in the licensing process. (orig.)

An FPGA-Based Adaptable 200 MHz Bandwidth Channel Sounder for Wireless Communication Channel Characterisation

Directory of Open Access Journals (Sweden)

David L. Ndzi

2011-01-01

Full Text Available This paper describes the development of a fast adaptable FPGA-based wideband channel sounder with signal bandwidths of up to 200 MHz and channel sampling rates up to 5.4 kHz. The application of FPGA allows the user to vary the number of real-time channel response averages, channel sampling interval, and duration of measurement. The waveform, bandwidth, and frequency resolution of the sounder can be adapted for any channel under investigation. The design approach and technology used has led to a reduction in size and weight by more than 60%. This makes the sounder ideal for mobile time-variant wireless communication channels studies. Averaging allows processing gains of up to 30 dB to be achieved for measurement in weak signal conditions. The technique applied also improves reliability, reduces power consumption, and has shifted sounder design complexity from hardware to software. Test results show that the sounder can detect very small-scale variations in channels.

Wireless, low-cost, FPGA-based miniature gamma ray spectrometer

Energy Technology Data Exchange (ETDEWEB)

Becker, E.M., E-mail: beckere@engr.orst.edu; Farsoni, A.T.

2014-10-11

A compact, low-cost, wireless gamma-ray spectrometer is a tool sought by a number of different organizations in the field of radiation detection. Such a device has applications in emergency response, battlefield assessment, and personal dosimetry. A prototype device fitting this description has been constructed in the Advanced Radiation Instrumentation Laboratory at Oregon State University. The prototype uses a CsI(Tl) scintillator coupled to a solid-state photomultiplier and a 40 MHz, 12-bit, FPGA-based digital pulse processor to measure gamma radiation, and is able to be accessed wirelessly by mobile phone. The prototype device consumes roughly 420 mW, weighs about 28 g (not including battery), and measures 2.54×3.81 cm{sup 2}. The prototype device is able to achieve 5.9% FWHM energy resolution at 662 keV.

Implementation in an FPGA circuit of Edge detection algorithm based on the Discrete Wavelet Transforms

Science.gov (United States)

Bouganssa, Issam; Sbihi, Mohamed; Zaim, Mounia

2017-07-01

The 2D Discrete Wavelet Transform (DWT) is a computationally intensive task that is usually implemented on specific architectures in many imaging systems in real time. In this paper, a high throughput edge or contour detection algorithm is proposed based on the discrete wavelet transform. A technique for applying the filters on the three directions (Horizontal, Vertical and Diagonal) of the image is used to present the maximum of the existing contours. The proposed architectures were designed in VHDL and mapped to a Xilinx Sparten6 FPGA. The results of the synthesis show that the proposed architecture has a low area cost and can operate up to 100 MHz, which can perform 2D wavelet analysis for a sequence of images while maintaining the flexibility of the system to support an adaptive algorithm.

From OO to FPGA :

Energy Technology Data Exchange (ETDEWEB)

Kou, Stephen; Palsberg, Jens; Brooks, Jeffrey

2012-09-01

Consumer electronics today such as cell phones often have one or more low-power FPGAs to assist with energy-intensive operations in order to reduce overall energy consumption and increase battery life. However, current techniques for programming FPGAs require people to be specially trained to do so. Ideally, software engineers can more readily take advantage of the benefits FPGAs offer by being able to program them using their existing skills, a common one being object-oriented programming. However, traditional techniques for compiling object-oriented languages are at odds with todays FPGA tools, which support neither pointers nor complex data structures. Open until now is the problem of compiling an object-oriented language to an FPGA in a way that harnesses this potential for huge energy savings. In this paper, we present a new compilation technique that feeds into an existing FPGA tool chain and produces FPGAs with up to almost an order of magnitude in energy savings compared to a low-power microprocessor while still retaining comparable performance and area usage.

Effective and efficient FPGA synthesis through general functional decomposition

NARCIS (Netherlands)

Jozwiak, L.; Slusarczyk, A.S.; Chojnacki, A.

2003-01-01

In this paper, a new information-driven circuit synthesis method is discussed that targets LUT-based FPGAs and FPGA-based reconfigurable system-on-a-chip platforms. The method is based on the bottom–up general functional decomposition and theory of information relationship measures that we

Design and FPGA Implementation of a new hyperchaotic system

International Nuclear Information System (INIS)

Wang Guangyi; Bao Xulei; Wang Zhonglin

2008-01-01

In this paper, a new four-dimensional autonomous hyperchaotic system is designed for generating complex chaotic signals. In the design, its parameters are selected according to the requirements for chaos and hyperchaos. The hyperchaotic Nature is verified theoretically by using the bifurcation analysis and demonstrated experimentally by the implementation of an analogue electronic circuit. Moreover, the Field Programmable Gate Array (FPGA) technology is applied to implementing a continuous system in a digital form by using a chip of Altera Cyclone II EP2C35F484C8. The digital sequence generated from the FPGA device is observed in our experimental setup. (general)

Fuzzy Controller Design Using FPGA for Photovoltaic Maximum Power Point Tracking

OpenAIRE

Basil M Hamed; Mohammed S. El-Moghany

2012-01-01

The cell has optimum operating point to be able to get maximum power. To obtain Maximum Power from photovoltaic array, photovoltaic power system usually requires Maximum Power Point Tracking (MPPT) controller. This paper provides a small power photovoltaic control system based on fuzzy control with FPGA technology design and implementation for MPPT. The system composed of photovoltaic module, buck converter and the fuzzy logic controller implemented on FPGA for controlling on/off time of MOSF...

A Research on Seamless Platform Change of Reactor Protection System From PLC to FPGA

Energy Technology Data Exchange (ETDEWEB)

Yoo, Junbeom; Lee, Jonghoon [Konkuk Univ., Seoul (Korea, Republic of); Lee, Jangsoo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2013-08-15

The PLC (Programmable Logic Controller) has been widely used to implement real-time controllers in nuclear RPSs (Reactor Protection Systems). Increasing complexity and maintenance cost, however, are now demanding more powerful and cost-effective implementation such as FPGA (Field-Programmable Gate Array). Abandoning all experience and knowledge accumulated over the decades and starting an all-new development approach is too risky for such safety-critical systems. This paper proposes an RPS software development process with a platform change from PLC to FPGA, while retaining all outputs from the established development. This paper transforms FBD designs of the PLC-based software development into a behaviorally-equivalent Verilog program, which is a starting point of a typical FPGA-based hardware development. We expect that the proposed software development process can bridge the gap between two software developing approaches with different platforms, such as PLC and FPGA. This paper also demonstrates its effectiveness using an example of a prototype version of a real-world RPS in Korea.

A Research on Seamless Platform Change of Reactor Protection System From PLC to FPGA

International Nuclear Information System (INIS)

Yoo, Junbeom; Lee, Jonghoon; Lee, Jangsoo

2013-01-01

The PLC (Programmable Logic Controller) has been widely used to implement real-time controllers in nuclear RPSs (Reactor Protection Systems). Increasing complexity and maintenance cost, however, are now demanding more powerful and cost-effective implementation such as FPGA (Field-Programmable Gate Array). Abandoning all experience and knowledge accumulated over the decades and starting an all-new development approach is too risky for such safety-critical systems. This paper proposes an RPS software development process with a platform change from PLC to FPGA, while retaining all outputs from the established development. This paper transforms FBD designs of the PLC-based software development into a behaviorally-equivalent Verilog program, which is a starting point of a typical FPGA-based hardware development. We expect that the proposed software development process can bridge the gap between two software developing approaches with different platforms, such as PLC and FPGA. This paper also demonstrates its effectiveness using an example of a prototype version of a real-world RPS in Korea

A RESEARCH ON SEAMLESS PLATFORM CHANGE OF REACTOR PROTECTION SYSTEM FROM PLC TO FPGA

Directory of Open Access Journals (Sweden)

JUNBEOM YOO

2013-08-01

Full Text Available The PLC (Programmable Logic Controller has been widely used to implement real-time controllers in nuclear RPSs (Reactor Protection Systems. Increasing complexity and maintenance cost, however, are now demanding more powerful and cost-effective implementation such as FPGA (Field-Programmable Gate Array. Abandoning all experience and knowledge accumulated over the decades and starting an all-new development approach is too risky for such safety-critical systems. This paper proposes an RPS software development process with a platform change from PLC to FPGA, while retaining all outputs from the established development. This paper transforms FBD designs of the PLC-based software development into a behaviorally-equivalent Verilog program, which is a starting point of a typical FPGA-based hardware development. We expect that the proposed software development process can bridge the gap between two software developing approaches with different platforms, such as PLC and FPGA. This paper also demonstrates its effectiveness using an example of a prototype version of a real-world RPS in Korea.

VHDL resolved function based inner communication bus for FPGA

Science.gov (United States)

Pozniak, Krzysztof T.

2017-08-01

This article discusses a method of building an internal, universal and parametric bus. The solution was designed for a variety of FPGA families and popular VHDL compilers. The algorithm of automatic configuration of address space and methods of receiving and sending addressed data are discussed. The basic solution realized in VHDL language in a behavioral form and chosen examples of practical use of the internal bus are presented in detail.

FPGA based phase detection technique for electron density measurement in SST-1 tokamak

International Nuclear Information System (INIS)

Pramila; Mandaliya, Hitesh; Rajpal, Rachana; Kaur, Rajwinder

2016-01-01

A multi-channel signal-conditioning and phase-detection concept is implemented in the prototype design using the high-precision OPAMP, high-speed comparators, high Q filters, high-density FPGA (Field Programmable Gate array), 10 MHz parallel-multiplying DACs (Digital to Analog Converter), etc. The complete digital-logic for the phase-detection is implemented inside the logic cells of FPGA using VHDL code, with high speed 100 MHz clock generated from Digital Clock Manager (DCM), which is used to measure the time elapsed between zero crossings of the two signals coming from reference and probe paths of the diagnostics. The logic is implemented to measure either leading or lagging phase and also to accumulate the total phase difference throughout the shot duration with the maximum value of accumulated phase of 5760 (16 cycles × 360°) degree and a resolution of 3.6 °. A precision high speed and high bandwidth (80 MHz) operational amplifiers are used as the front end-electronics component for conditioning the high-frequency (1 MHz) and low amplitude signal (μV). The hardware detail, implementation concept in FPGA and testing results will be presented in the paper.

FPGA based phase detection technique for electron density measurement in SST-1 tokamak

Energy Technology Data Exchange (ETDEWEB)

Pramila, E-mail: pramila@ipr.res.in; Mandaliya, Hitesh; Rajpal, Rachana; Kaur, Rajwinder

2016-11-15

A multi-channel signal-conditioning and phase-detection concept is implemented in the prototype design using the high-precision OPAMP, high-speed comparators, high Q filters, high-density FPGA (Field Programmable Gate array), 10 MHz parallel-multiplying DACs (Digital to Analog Converter), etc. The complete digital-logic for the phase-detection is implemented inside the logic cells of FPGA using VHDL code, with high speed 100 MHz clock generated from Digital Clock Manager (DCM), which is used to measure the time elapsed between zero crossings of the two signals coming from reference and probe paths of the diagnostics. The logic is implemented to measure either leading or lagging phase and also to accumulate the total phase difference throughout the shot duration with the maximum value of accumulated phase of 5760 (16 cycles × 360°) degree and a resolution of 3.6 °. A precision high speed and high bandwidth (80 MHz) operational amplifiers are used as the front end-electronics component for conditioning the high-frequency (1 MHz) and low amplitude signal (μV). The hardware detail, implementation concept in FPGA and testing results will be presented in the paper.

FPGA-based quench detection system for super-FRS super-ferric dipole prototype

International Nuclear Information System (INIS)

Yang Tongjun; Wu Wei; Yao Qinggao; Yuan Ping; He Yuan; Han Shaofei; Ma Lizhen

2011-01-01

The quench detection system for Super-FRS super-ferric dipole prototype magnet of FAIR has been designed and built. The balance bridge was used to detect quench signal. In order to avoid blind zone of quench detection, two independent bridges were used. NI PXI-7830R FPGA was used to implement filter to quench signal and algorithm of quench decision and to produce quench trigger signal. Pre-sample technique was used in quench data acquisition. The data before and after quench could be recorded for analysis later. The test result indicated that the quench of the dipole's superconducting coil could be reliably detected by the quench detection module. (authors)

An FPGA-Based High-Speed Error Resilient Data Aggregation and Control for High Energy Physics Experiment

Science.gov (United States)

Mandal, Swagata; Saini, Jogender; Zabołotny, Wojciech M.; Sau, Suman; Chakrabarti, Amlan; Chattopadhyay, Subhasis

2017-03-01

Due to the dramatic increase of data volume in modern high energy physics (HEP) experiments, a robust high-speed data acquisition (DAQ) system is very much needed to gather the data generated during different nuclear interactions. As the DAQ works under harsh radiation environment, there is a fair chance of data corruption due to various energetic particles like alpha, beta, or neutron. Hence, a major challenge in the development of DAQ in the HEP experiment is to establish an error resilient communication system between front-end sensors or detectors and back-end data processing computing nodes. Here, we have implemented the DAQ using field-programmable gate array (FPGA) due to some of its inherent advantages over the application-specific integrated circuit. A novel orthogonal concatenated code and cyclic redundancy check (CRC) have been used to mitigate the effects of data corruption in the user data. Scrubbing with a 32-b CRC has been used against error in the configuration memory of FPGA. Data from front-end sensors will reach to the back-end processing nodes through multiple stages that may add an uncertain amount of delay to the different data packets. We have also proposed a novel memory management algorithm that helps to process the data at the back-end computing nodes removing the added path delays. To the best of our knowledge, the proposed FPGA-based DAQ utilizing optical link with channel coding and efficient memory management modules can be considered as first of its kind. Performance estimation of the implemented DAQ system is done based on resource utilization, bit error rate, efficiency, and robustness to radiation.

Implementation of Wireless Communications Systems on FPGA-Based Platforms

Directory of Open Access Journals (Sweden)

Voros NS

2007-01-01

Full Text Available Wireless communications are a very popular application domain. The efficient implementation of their components (access points and mobile terminals/network interface cards in terms of hardware cost and design time is of great importance. This paper describes the design and implementation of the HIPERLAN/2 WLAN system on a platform including general purpose microprocessors and FPGAs. Detailed implementation results (performance, code size, and FPGA resources utilization are presented. The main goal of the design case presented is to provide insight into the design aspects of a complex system based on FPGAs. The results prove that an implementation based on microprocessors and FPGAs is adequate for the access point part of the system where the expected volumes are rather small. At the same time, such an implementation serves as a prototyping of an integrated implementation (System-on-Chip, which is necessary for the mobile terminals of a HIPERLAN/2 system. Finally, firmware upgrades were developed allowing the implementation of an outdoor wireless communication system on the same platform.

SEU43 fuel bundles in CANDU 600

International Nuclear Information System (INIS)

Catana, Alexandru; Prodea, Iosif; Danila, Nicolae; Prisecaru, Ilie; Dupleac, Daniel

2008-01-01

Cernavoda Unit 1 and Unit 2 are pressure tube 650 MWe nuclear stations moderated and cooled with heavy water, of Canada design, located in Romania. Fuelling is on-power and the plant is currently fuelled with natural uranium dioxide. Fuel is encapsulated in a 37 fuel rod assembly having a specific standard geometry (STD37). In order to reduce fuel cycle costs programs were initiated in Canada, South Korea and at SCN Pitesti, Romania for design and build of a new, improved geometry fuel bundle and some fuel compositions. Among fuel compositions, which are considered, is the slightly enriched uranium (SEU) fuel (0.96 w% U-235) with an associated burn-up increase from ∼7900 MWd/tU up to ∼15000 MWd/tU. Neutron analysis showed that the Canadian-Korean fuel bundle geometry with 43 rods called SEU (SEU43) can be used in already operated reactors. A new fuel bundle resulted. Extended, comprehensive analysis must be conducted in order to assess the TH behavior of SEU43 besides the neutron, mechanical (drag force, etc) analyses. In this paper, using the sub-channel approach, main thermal-hydraulic parameters were analyzed: pressure drop; fuel, sheath and coolant temperatures; coolant density; critical heat flux. Some significant differences versus standard fuel are outlined in the paper and some conclusions are drawn. While, by using this new fuel, there are many benefits to be attained like: fuel costs reduction, spent fuel waste minimization, increase in competitiveness of nuclear power generation against other sources of generation, etc., the safety margins must be, at least, conserved. The introduction of a new fuel bundle type, different in geometry and fuel composition, requires a detailed preparation, a testing program and a series of neutron and thermal-hydraulic analysis. The results reported by this paper is part of this effort. The feasibility to increase the enrichment from 0.71% U-235 (NU) to 0.96% U-235, with an estimated burn-up increase up to 14000 MWd

FPGA-Based Real-Time Motion Detection for Automated Video Surveillance Systems

Directory of Open Access Journals (Sweden)

Sanjay Singh

2016-03-01

Full Text Available Design of automated video surveillance systems is one of the exigent missions in computer vision community because of their ability to automatically select frames of interest in incoming video streams based on motion detection. This research paper focuses on the real-time hardware implementation of a motion detection algorithm for such vision based automated surveillance systems. A dedicated VLSI architecture has been proposed and designed for clustering-based motion detection scheme. The working prototype of a complete standalone automated video surveillance system, including input camera interface, designed motion detection VLSI architecture, and output display interface, with real-time relevant motion detection capabilities, has been implemented on Xilinx ML510 (Virtex-5 FX130T FPGA platform. The prototyped system robustly detects the relevant motion in real-time in live PAL (720 × 576 resolution video streams directly coming from the camera.

Design and implementation of FPGA-based LQ control of active magnetic bearings

Energy Technology Data Exchange (ETDEWEB)

Jastrzebski, R.

2007-07-01

The need for high performance, high precision, and energy saving in rotating machinery demands an alternative solution to traditional bearings. Because of the contactless operation principle, the rotating machines employing active magnetic bearings (AMBs) provide many advantages over the traditional ones. The advantages such as contamination-free operation, low maintenance costs, high rotational speeds, low parasitic losses, programmable stiffness and damping, and vibration insulation come at expense of high cost, and complex technical solution. All these properties make the use of AMBs appropriate primarily for specific and highly demanding applications. High performance and high precision control requires model-based control methods and accurate models of the flexible rotor. In turn, complex models lead to high-order controllers and feature considerable computational burden. Fortunately, in the last few years the advancements in signal processing devices provide new perspective on the real-time control of AMBs. The design and the real-time digital implementation of the high-order LQ controllers, which focus on fast execution times, are the subjects of this work. In particular, the control design and implementation in the field programmable gate array (FPGA) circuits are investigated. The optimal design is guided by the physical constraints of the system for selecting the optimal weighting matrices. The plant model is complemented by augmenting appropriate disturbance models. The compensation of the force-field nonlinearities is proposed for decreasing the uncertainty of the actuator. A disturbance-observer-based unbalance compensation for canceling the magnetic force vibrations or vibrations in the measured positions is presented. The theoretical studies are verified by the practical experiments utilizing a custom-built laboratory test rig. The test rig uses a prototyping control platform developed in the scope of this work. To sum up, the work makes a step in

Design and FPGA Implementation of Variable Cutoff Frequency Filter based on Continuously Variable Fractional Delay Structure and Interpolation Technique

Directory of Open Access Journals (Sweden)

Sumedh Dhabu

2015-09-01

Full Text Available This paper presents the design and FPGA implementation of interpolated continuously variable fractional delay structure based filter (ICVFD filter with fine control over the cutoff frequency. In the ICVFD filter, each unit delay of the prototype lowpass filter is replaced by a continuously variable fractional delay (CVFD element proposed in this paper. The CVFD element requires the same number of multiplications as that of the second-order fractional delay structure used in the existing fractional delay structure based variable filter (FDS based filter, however it provides fractional delays corresponding to the higher-order fractional delay structures. Hence, the proposed ICVFD filter provides wider cutoff frequency range compared to the FDS based filter. The ICVFD filter is also capable of providing variable bandpass and highpass responses. We use two-stage approach for the FPGA implementation of the ICVFD filter. First, we use pipelining stages to shorten the critical path and improve the operating frequency. Then, we make use of specific hardware resource, i.e. RAM-based Shift Register (SRL to further improve the operating frequency and resource usage.

improvement of digital image watermarking techniques based on FPGA implementation

International Nuclear Information System (INIS)

EL-Hadedy, M.E

2006-01-01

digital watermarking provides the ownership of a piece of digital data by marking the considered data invisibly or visibly. this can be used to protect several types of multimedia objects such as audio, text, image and video. this thesis demonstrates the different types of watermarking techniques such as (discrete cosine transform (DCT) and discrete wavelet transform (DWT) and their characteristics. then, it classifies these techniques declaring their advantages and disadvantages. an improved technique with distinguished features, such as peak signal to noise ratio ( PSNR) and similarity ratio (SR) has been introduced. the modified technique has been compared with the other techniques by measuring heir robustness against differ attacks. finally, field programmable gate arrays (FPGA) based implementation and comparison, for the proposed watermarking technique have been presented and discussed

Nuclear data relevant to single-event upsets (SEU) in microelectronics and their application to SEU simulation

International Nuclear Information System (INIS)

Watanabe, Yukinobu; Tukamoto, Yasuyuki; Kodama, Akihiro; Nakashima, Hideki

2004-01-01

A cross-section database for neutron-induced reactions on 28 Si was developed in the energy range between 2 MeV and 3 GeV in order to analyze single-event upsets (SEUs) phenomena induced by cosmic-ray neutrons in microelectronic devices. A simplified spherical device model was proposed for simulation of the initial process of SEUs. The model was applied to SEU cross-section calculations for semiconductor memory devices. The calculated results were compared with measured SEU cross-sections and the other simulation result. The dependence of SEU cross-sections on incident neutron energy and secondary ions having the most important effects on SEUs are discussed. (author)

Ambient Temperature Based Thermal Aware Energy Efficient ROM Design on FPGA

DEFF Research Database (Denmark)

Saini, Rishita; Bansal, Neha; Bansal, Meenakshi

2015-01-01

Thermal aware design is currently gaining importance in VLSI research domain. In this work, we are going to design thermal aware energy efficient ROM on Virtex-5 FPGA. Ambient Temperature, airflow, and heat sink profile play a significant role in thermal aware hardware design life cycle. Ambient...

An FPGA- Based General-Purpose Data Acquisition Controller

Science.gov (United States)

Robson, C. C. W.; Bousselham, A.; Bohm

2006-08-01

System development in advanced FPGAs allows considerable flexibility, both during development and in production use. A mixed firmware/software solution allows the developer to choose what shall be done in firmware or software, and to make that decision late in the process. However, this flexibility comes at the cost of increased complexity. We have designed a modular development framework to help to overcome these issues of increased complexity. This framework comprises a generic controller that can be adapted for different systems by simply changing the software or firmware parts. The controller can use both soft and hard processors, with or without an RTOS, based on the demands of the system to be developed. The resulting system uses the Internet for both control and data acquisition. In our studies we developed the embedded system in a Xilinx Virtex-II Pro FPGA, where we used both PowerPC and MicroBlaze cores, http, Java, and LabView for control and communication, together with the MicroC/OS-II and OSE operating systems

FPGA Techniques Based New Hybrid Modulation Strategies for Voltage Source Inverters

Science.gov (United States)

Sudha, L. U.; Baskaran, J.; Elankurisil, S. A.

2015-01-01

This paper corroborates three different hybrid modulation strategies suitable for single-phase voltage source inverter. The proposed method is formulated using fundamental switching and carrier based pulse width modulation methods. The main tale of this proposed method is to optimize a specific performance criterion, such as minimization of the total harmonic distortion (THD), lower order harmonics, switching losses, and heat losses. The proposed method is articulated using fundamental switching and carrier based pulse width modulation methods. Thus, the harmonic pollution in the power system will be reduced and the power quality will be augmented with better harmonic profile for a target fundamental output voltage. The proposed modulation strategies are simulated in MATLAB r2010a and implemented in a Xilinx spartan 3E-500 FG 320 FPGA processor. The feasibility of these modulation strategies is authenticated through simulation and experimental results. PMID:25821852

An FPGA-Based Omnidirectional Vision Sensor for Motion Detection on Mobile Robots

Directory of Open Access Journals (Sweden)

Jones Y. Mori

2012-01-01

Full Text Available This work presents the development of an integrated hardware/software sensor system for moving object detection and distance calculation, based on background subtraction algorithm. The sensor comprises a catadioptric system composed by a camera and a convex mirror that reflects the environment to the camera from all directions, obtaining a panoramic view. The sensor is used as an omnidirectional vision system, allowing for localization and navigation tasks of mobile robots. Several image processing operations such as filtering, segmentation and morphology have been included in the processing architecture. For achieving distance measurement, an algorithm to determine the center of mass of a detected object was implemented. The overall architecture has been mapped onto a commercial low-cost FPGA device, using a hardware/software co-design approach, which comprises a Nios II embedded microprocessor and specific image processing blocks, which have been implemented in hardware. The background subtraction algorithm was also used to calibrate the system, allowing for accurate results. Synthesis results show that the system can achieve a throughput of 26.6 processed frames per second and the performance analysis pointed out that the overall architecture achieves a speedup factor of 13.78 in comparison with a PC-based solution running on the real-time operating system xPC Target.

Realization of manchester encoding and decoding and fast-speed communication for digital power supply based on FPGA

International Nuclear Information System (INIS)

Chen Huanguang; Xu Ruinian; Shen Tianjian; Li Deming

2008-01-01

A design and simulation to realize the process of Manchester encoding and decoding, to realize the process of SPI communication between FPGA and DSP, using Altera company's Quartus II IDE on FPGA is presented in this paper. And the application on the digital power supply controller with Manchester communication by optical fiber is introduced. (authors)

SEU ground and flight data in static random access memories

International Nuclear Information System (INIS)

Liu, J.; Duan, J.L.; Hou, M.D.; Sun, Y.M.; Yao, H.J.; Mo, D.; Zhang, Q.X.; Wang, Z.G.; Jin, Y.F.; Cai, J.R.; Ye, Z.H.; Han, J.W.; Lin, Y.L.; Huang, Z.

2006-01-01

This paper presents the vulnerabilities of single event effects (SEEs) simulated by heavy ions on ground and observed on SJ-5 research satellite in space for static random access memories (SRAMs). A single event upset (SEU) prediction code has been used to estimate the proton-induced upset rates based on the ground test curve of SEU cross-section versus heavy ion linear energy transfer (LET). The result agrees with that of the flight data

A Controller for Dynamic Partial Reconfiguration in FPGA-Based Real-Time Systems

DEFF Research Database (Denmark)

Pezzarossa, Luca; Schoeberl, Martin; Sparsø, Jens

2017-01-01

-source DPR controller specially developed for hard real-time systems and prototyped in connection with the open-source multi-core platform for real-time applications T-CREST. The controller enables a processor to perform reconfiguration in a time-predictable manner and supports different operating modes......In real-time systems, the use of hardware accelerators can lead to a worst-case execution-time speed-up, to a simplification of its analysis, and to a reduction of its pessimism. When using FPGA technology, dynamic partial reconfiguration (DPR) can be used to minimize the area, by only loading....... The paper also presents a software tool for bitstream conversion, compression, and for reconfiguration time analysis. The DPR controller is evaluated in terms of hardware cost, operating frequency, speed, and bitstream compression ratio vs. reconfiguration time trade-off. A simple application example...

Real-time digital simulation of power electronics systems with Neutral Point Piloted multilevel inverter using FPGA

Energy Technology Data Exchange (ETDEWEB)

Rakotozafy, Mamianja [Groupe de Recherches en Electrotechnique et Electronique de Nancy (GREEN), Faculte des Sciences et Techniques, BP 70239, 54506 Vandoeuvre Cedex (France); CONVERTEAM SAS, Parc d' activites Techn' hom, 24 avenue du Marechal Juin, BP 40437, 90008 Belfort Cedex (France); Poure, Philippe [Laboratoire d' Instrumentation Electronique de Nancy (LIEN), Faculte des Sciences et Techniques, BP 70239, 54506 Vandoeuvre Cedex (France); Saadate, Shahrokh [Groupe de Recherches en Electrotechnique et Electronique de Nancy (GREEN), Faculte des Sciences et Techniques, BP 70239, 54506 Vandoeuvre Cedex (France); Bordas, Cedric; Leclere, Loic [CONVERTEAM SAS, Parc d' activites Techn' hom, 24 avenue du Marechal Juin, BP 40437, 90008 Belfort Cedex (France)

2011-02-15

Most of actual real time simulation platforms have practically about ten microseconds as minimum calculation time step, mainly due to computation limits such as processing speed, architecture adequacy and modeling complexities. Therefore, simulation of fast switching converters' instantaneous models requires smaller computing time step. The approach presented in this paper proposes an answer to such limited modeling accuracies and computational bandwidth of the currently available digital simulators.As an example, the authors present a low cost, flexible and high performance FPGA-based real-time digital simulator for a complete complex power system with Neutral Point Piloted (NPP) three-level inverter. The proposed real-time simulator can model accurately and efficiently the complete power system, reducing costs, physical space and avoiding any damage to the actual equipment in the case of any dysfunction of the digital controller prototype. The converter model is computed at a small fixed time step as low as 100 ns. Such a computation time step allows high precision account of the gating signals and thus avoids averaging methods and event compensations. Moreover, a novel high performance model of the NPP three-level inverter has also been proposed for FPGA implementation. The proposed FPGA-based simulator models the environment of the NPP converter: the dc link, the RLE load and the digital controller and gating signals. FPGA-based real time simulation results are presented and compared with offline results obtained using PLECS software. They validate the efficiency and accuracy of the modeling for the proposed high performance FPGA-based real-time simulation approach. This paper also introduces new potential FPGA-based applications such as low cost real time simulator for power systems by developing a library of flexible and portable models for power converters, electrical machines and drives. (author)

Speech Silicon: An FPGA Architecture for Real-Time Hidden Markov-Model-Based Speech Recognition

Directory of Open Access Journals (Sweden)

Schuster Jeffrey

2006-01-01

Full Text Available This paper examines the design of an FPGA-based system-on-a-chip capable of performing continuous speech recognition on medium sized vocabularies in real time. Through the creation of three dedicated pipelines, one for each of the major operations in the system, we were able to maximize the throughput of the system while simultaneously minimizing the number of pipeline stalls in the system. Further, by implementing a token-passing scheme between the later stages of the system, the complexity of the control was greatly reduced and the amount of active data present in the system at any time was minimized. Additionally, through in-depth analysis of the SPHINX 3 large vocabulary continuous speech recognition engine, we were able to design models that could be efficiently benchmarked against a known software platform. These results, combined with the ability to reprogram the system for different recognition tasks, serve to create a system capable of performing real-time speech recognition in a vast array of environments.

Speech Silicon: An FPGA Architecture for Real-Time Hidden Markov-Model-Based Speech Recognition

Directory of Open Access Journals (Sweden)

Alex K. Jones

2006-11-01

Full Text Available This paper examines the design of an FPGA-based system-on-a-chip capable of performing continuous speech recognition on medium sized vocabularies in real time. Through the creation of three dedicated pipelines, one for each of the major operations in the system, we were able to maximize the throughput of the system while simultaneously minimizing the number of pipeline stalls in the system. Further, by implementing a token-passing scheme between the later stages of the system, the complexity of the control was greatly reduced and the amount of active data present in the system at any time was minimized. Additionally, through in-depth analysis of the SPHINX 3 large vocabulary continuous speech recognition engine, we were able to design models that could be efficiently benchmarked against a known software platform. These results, combined with the ability to reprogram the system for different recognition tasks, serve to create a system capable of performing real-time speech recognition in a vast array of environments.

Video Watermarking Implementation Based on FPGA

International Nuclear Information System (INIS)

EL-ARABY, W.S.M.S.

2012-01-01

The sudden increase in watermarking interest is most likely due to the increase in concern over copyright protection of content. With the rapid growth of the Internet and the multimedia systems in distributed environments, digital data owners are now easier to transfer multimedia documents across the Internet. However, current technology does not protect their copyrights properly. This leads to wide interest of multimedia security and multimedia copyright protection and it has become a great concern to the public in recent years. In the early days, encryption and control access techniques were used to protect the ownership of media. Recently, the watermarking techniques are utilized to keep safely the copyrights. In this thesis, a fast and secure invisible video watermark technique has been introduced. The technique based mainly on DCT and Low Frequency using pseudo random number (PN) sequence generator for embedding algorithm. The system has been realized using VHDL and the results have been verified using MATLAB. The implementation of the introduced watermark system done using Xilinx chip (XCV800). The implementation results show that the total area of watermark technique is 45% of total FPGA area with maximum delay equals 16.393ns. The experimental results show that the two techniques have mean square error (MSE) equal to 0.0133 and peak signal to noise ratio (PSNR) equal to 66.8984db. The results have been demonstrated and compared with conventional watermark technique using DCT.

OrFPGA: An Empirical Performance Tuning Tool for FPGA Designs, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — In this Phase II STTR project, RNET and its subcontractors are proposing to fully develop an empirical performance optimization tool called OrFPGA that efficiently...

FPGA Implementation of the stepwise shutdown system

International Nuclear Information System (INIS)

Lotjonen, L.

2012-01-01

This report elaborates the design process of applications for field-programmable gate array (FPGA) devices. Brief introductions to EPGA technology and the design process are first given and then the design phases are walked through with the aid of a case study. FPGA is a programmable logic device that is programmed by the customer rather than the manufacturer. They are also usually re-programmable which enables updating their programming and otherwise modifying the design. There are also one-time programmable FPGAs that can be used when security issues require it. FPGA is said to be 'hardware designed like software', which means that the design process resembles software development but the end-product is considered a hardware application because the execution of the functions is entirely different from a microprocessor. This duality can give both the flexibility of software and the reliability of hardware. The FPGA design and verification and validation (V and V) methods for NPP safety systems have not yet matured because the technology is rather new in the field. Software development methods and standards can be used to some extent but the hardware aspects bring new challenges that cannot be tackled using purely software methods. International efforts are being made to development formal and consistent design and V and V methodology regulations for FPGA devices. A preventive safety function called Stepwise Shutdown System (SWS) was implemented on an Actel M1 IGLOO field-programmable gate array (FPGA) device. SWS is used to drive a process into a normal state if the process measurements deviate from the desired operating values. This can happen in case of process disturbances. The SWS implementation process from the requirements to the functional device is elaborated. The design is tested via simulation and hardware testing. The case study is to be further expanded as a part of a master's thesis. (orig.)

FPGA Implementation of the stepwise shutdown system

Energy Technology Data Exchange (ETDEWEB)

Lotjonen, L.

2012-07-01

This report elaborates the design process of applications for field-programmable gate array (FPGA) devices. Brief introductions to EPGA technology and the design process are first given and then the design phases are walked through with the aid of a case study. FPGA is a programmable logic device that is programmed by the customer rather than the manufacturer. They are also usually re-programmable which enables updating their programming and otherwise modifying the design. There are also one-time programmable FPGAs that can be used when security issues require it. FPGA is said to be 'hardware designed like software', which means that the design process resembles software development but the end-product is considered a hardware application because the execution of the functions is entirely different from a microprocessor. This duality can give both the flexibility of software and the reliability of hardware. The FPGA design and verification and validation (V and V) methods for NPP safety systems have not yet matured because the technology is rather new in the field. Software development methods and stanfards can be used to some extent but the hardware aspects bring new challenges that cannot be tacled using purely software methods. International efforts are being made to development formal and consistent design and V and V methodology regulations for FPGA devices. A preventive safety function called Stepwise Shutdown System (SWS) was implemented on an Actel M1 IGLOO field-programmable gate array (FPGA) device. SWS is used to drive a process into a normal state if the process measurements deviate from the desired operating values. This can happen in case of process disturbances. The SWS implementation processfrom the reguirements to the functional device is elaborated. The design is tested via simulation and hardware testing. The case study is to be further expanded as a part of a master's thesis. (orig.)

FPGA-based real-time phase measuring profilometry algorithm design and implementation

Science.gov (United States)

Zhan, Guomin; Tang, Hongwei; Zhong, Kai; Li, Zhongwei; Shi, Yusheng

2016-11-01

Phase measuring profilometry (PMP) has been widely used in many fields, like Computer Aided Verification (CAV), Flexible Manufacturing System (FMS) et al. High frame-rate (HFR) real-time vision-based feedback control will be a common demands in near future. However, the instruction time delay in the computer caused by numerous repetitive operations greatly limit the efficiency of data processing. FPGA has the advantages of pipeline architecture and parallel execution, and it fit for handling PMP algorithm. In this paper, we design a fully pipelined hardware architecture for PMP. The functions of hardware architecture includes rectification, phase calculation, phase shifting, and stereo matching. The experiment verified the performance of this method, and the factors that may influence the computation accuracy was analyzed.

Electronic readout for THGEM detectors based on FPGA TDCs

Energy Technology Data Exchange (ETDEWEB)

Baumann, Tobias; Buechele, Maximilian; Fischer, Horst; Gorzellik, Matthias; Grussenmeyer, Tobias; Herrmann, Florian; Joerg, Philipp; Koenigsmann, Kay; Kremser, Paul; Kunz, Tobias; Michalski, Christoph; Schopferer, Sebastian; Szameitat, Tobias [Physikalisches Institut, Freiburg Univ. (Germany); Collaboration: COMPASS-II RICH upgrade Group

2013-07-01

In the framework of the RD51 programme the characteristics of a new detector design, called THGEM, which is based on multi-layer arrangements of printed circuit board material, is investigated. The THGEMs combine the advantages for covering gains up to 10{sup 6} in electron multiplication at large detector areas and low material budget. Studies are performed by extending the design to a hybrid gas detector by adding a Micromega layer, which significantly improves the ion back flow ratio of the chamber. With the upgrade of the COMPASS experiment at CERN a MWPC plane of the RICH-1 detector will be replaced by installing THGEM chambers. This summarizes to 40k channels of electronic readout, including amplification, discrimination and time-to-digital conversion of the anode signals. Due to the expected hit rate of the detector we design a cost-efficient TDC, based on Artix7 FPGA technology, with time resolution below 100 ps and sufficient hit buffer depth. To cover the large readout area the data is transferred via optical fibres to a central readout system which is part of the GANDALF framework.

FPGA-based fast pipeline-parameterized-sorter implementation for first level trigger systems in HEP experiments

CERN Document Server

Pozniak, Krzysztof T

2004-01-01

The paper describes a behavioral model of fast, pipeline sorter dedicated to electronic triggering applications in the experiments of high energy physics (HEP). The sorter was implemented in FPGA for the RPC Muon Detector of CMS experiment (LHC accelerator, CERN) and for Backing Calorimeter (BAC) in ZEUS experiment (HERA accelerator, DESY) . A general principle of the applied sorting algorithm was presented. The implementation results were debated in detail for chosen FPGA chips by ALTERA and XILINX manufactures. The realization costs have been calculated as function of system parameters.

Characterization of System on a Chip (SoC) Single Event Upset (SEU) Responses Using SEU Data, Classical Reliability Models, and Space Environment Data

Science.gov (United States)

Berg, Melanie; Label, Kenneth; Campola, Michael; Xapsos, Michael

2017-01-01

We propose a method for the application of single event upset (SEU) data towards the analysis of complex systems using transformed reliability models (from the time domain to the particle fluence domain) and space environment data.

Single Event Effects in FPGA Devices 2015-2016

Science.gov (United States)

Berg, Melanie; LaBel, Kenneth; Pellish, Jonathan

2016-01-01

This presentation provides an overview of single event effects in FPGA devices 2015-2016 including commercial Xilinx V5 heavy ion accelerated testing, Xilinx Kintex-7 heavy ion accelerated testing, mitigation study, and investigation of various types of triple modular redundancy (TMR) for commercial SRAM based FPGAs.

Cycle accurate and cycle reproducible memory for an FPGA based hardware accelerator

Science.gov (United States)

Asaad, Sameh W.; Kapur, Mohit

2016-03-15

A method, system and computer program product are disclosed for using a Field Programmable Gate Array (FPGA) to simulate operations of a device under test (DUT). The DUT includes a device memory having a number of input ports, and the FPGA is associated with a target memory having a second number of input ports, the second number being less than the first number. In one embodiment, a given set of inputs is applied to the device memory at a frequency Fd and in a defined cycle of time, and the given set of inputs is applied to the target memory at a frequency Ft. Ft is greater than Fd and cycle accuracy is maintained between the device memory and the target memory. In an embodiment, a cycle accurate model of the DUT memory is created by separating the DUT memory interface protocol from the target memory storage array.

Design and development of VHDL based IP core for coincidence analyzer for FPGA based TDCR system

International Nuclear Information System (INIS)

Agarwal, Shivam; Gupta, Ashutosh; Chaudhury, Probal; Sharma, M.K.; Kulkarni, M.S.

2018-01-01

The coincidence counting technique is used in activity measurement methods to determine the activity of radionuclide e.g. 4πβ-γ method and Triple to Double Coincidence Ratio (TDCR) method etc. The 4πβ-γ method requires two inputs Coincidence Analyzer (CA) whereas; TDCR method requires three inputs CA. A VHDL (Very High Speed Integrated Circuit Hardware Description Language) based IP (Intellectual Property) core for coincidence analyzer has been designed and implemented in FPGA (Field Programmable Gate Array) for TDCR system. The developed IP not only facilitates the coincidence counting of three channels simultaneously but also provides an extendable dead time feature

1 GSPS digitizer based on the FPGA Mezzanine Card (FMC) standard with low-count pin connector.

CERN Document Server

Vasilyev, Mikhail

2015-01-01

Under the scope of a CERN summer student project, the schematic for ADC based on FMC mezzanine card with 1 GSPS sampling rate and 8 bit resolution was developed. The mezzanine is fully compatible with the standard: FPGA Mezzanine Card (FMC) [1]. A low-pin count connector was used to connect the mezzanine with the “carrier”. The carrier was an Open Hardware project: Simple PCIe FMC carrier (SPEC).

LVTTL Based Energy Efficient Watermark Generator Design and Implementation on FPGA

DEFF Research Database (Denmark)

Pandey, Bishwajeet; Kaur, Amanpreet; Kumar, Tanesh

2014-01-01

-transistor logic (LVTTL) IO standard is used in this design to make it power optimized. This design is implemented on Kintex-7 FPGA, Device XC7K70T and -3 speed grades. When we are scaling the device operating frequency from 100GHz to 5GHz, there is 94.93% saving in total power of the watermark generator...

FPGA implementation of a configurable neuromorphic CPG-based locomotion controller.

Science.gov (United States)

Barron-Zambrano, Jose Hugo; Torres-Huitzil, Cesar

2013-09-01

Neuromorphic engineering is a discipline devoted to the design and development of computational hardware that mimics the characteristics and capabilities of neuro-biological systems. In recent years, neuromorphic hardware systems have been implemented using a hybrid approach incorporating digital hardware so as to provide flexibility and scalability at the cost of power efficiency and some biological realism. This paper proposes an FPGA-based neuromorphic-like embedded system on a chip to generate locomotion patterns of periodic rhythmic movements inspired by Central Pattern Generators (CPGs). The proposed implementation follows a top-down approach where modularity and hierarchy are two desirable features. The locomotion controller is based on CPG models to produce rhythmic locomotion patterns or gaits for legged robots such as quadrupeds and hexapods. The architecture is configurable and scalable for robots with either different morphologies or different degrees of freedom (DOFs). Experiments performed on a real robot are presented and discussed. The obtained results demonstrate that the CPG-based controller provides the necessary flexibility to generate different rhythmic patterns at run-time suitable for adaptable locomotion. Copyright © 2013 Elsevier Ltd. All rights reserved.

Signal compression in radar using FPGA

OpenAIRE

Escamilla Hemández, Enrique; Kravchenko, Víctor; Ponomaryov, Volodymyr; Duchen Sánchez, Gonzalo; Hernández Sánchez, David

2010-01-01

We present the hardware implementation of radar real time processing procedures using a simple, fast technique based on FPGA (Field Programmable Gate Array) architecture. This processing includes different window procedures during pulse compression in synthetic aperture radar (SAR). The radar signal compression processing is realized using matched filter, and classical and novel window functions, where we focus on better solution for minimum values of sidelobes. The proposed architecture expl...

SEU blending project concept to commercial operation. Part 1: process development

International Nuclear Information System (INIS)

Ioffe, M.S.; Bhattacharjee, S.; Oliver, A.J.; Ozberk, E.

2004-01-01

The process development test program for production of Slightly Enriched Uranium (SEU) dioxide powder had started with 100 g Low Enriched Uranium (LEU) dioxide powder samples obtained from different suppliers. Encouraging results obtained in the initial test program established a basis for working with 9.5 kg LEU powder samples and production of larger quantities of SEU powder for characterization to meet the target quality and ensuring development of process design criteria for the commercial scale plant design. Similarly, the process development test program for production of Blended Dysprosium and Uranium (BDU) oxide powders was initiated using different Dy 2 O 3 powder samples from different suppliers. The variability of the quality of Dy 2 O 3 powder samples received from different suppliers resulted in substantial investigation in characterization of Dy 2 O 3 powders. The test program for both products required forming a cross-functional project team from several departments within Cameco with the focus of the development work to be carried out at the Cameco Technology Development. Many aspects of developing two new products were addressed. These included developing design criteria for preparation of SEU and BDU powders for a Demonstration Irradiation (DI) program and commercial scale plant, Quality Assurance program (including specifications for SEU and BDU powder products, SEU and BDU scraps, Cameco Quality Specifications for purchasing LEU and Dy 2 O 3 powders, and Inspection and Test Plan for SEU and BDU powder production), accurate uranium accountability, enhanced safety requirements, bench and laboratory test safety and operability manuals and procedures for analysis. (author)

Online data reduction with FPGA-based track reconstruction for the Belle II DEPFET pixel detector

Energy Technology Data Exchange (ETDEWEB)

Deschamps, Bruno; Wessel, Christian; Marinas, Carlos; Dingfelder, Jochen [Physikalisches Institut, Universitaet Bonn (Germany)

2016-07-01

The innermost two layers of the Belle II vertex detector at the KEK facility in Tsukuba, Japan, will be covered by high-granularity DEPFET pixel sensors (PXD). The large number of pixels leads to a maximum data rate of 256 Gbps, which has to be significantly reduced by the Data Acquisition System (DATCON). For the data reduction the hit information of the surrounding Silicon strip Vertex Detector (SVD) is utilized to define so-called Regions of Interest (ROI). Only hit information of the pixels located inside these ROIs are saved. The ROIs for the PXD are computed by reconstructing track segments from SVD data and extrapolation to the PXD. The goal is to achieve a data reduction of at least a factor of 10 with this ROI selection. All the necessary processing stages, the receiving, decoding and multiplexing of SVD data on 48 optical fibers, the track reconstruction and the definition of the ROIs, will be performed by the presented system. The planned hardware design is based on a distributed set of Advanced Mezzanine Cards (AMC) each equipped with a Field Programmable Gate Array (FPGA) and 4 optical transceivers. In this talk, the status and plans for the DATCON prototype and the FPGA-based tracking algorithm are introduced as well as the plans for their test in the upcoming test beam at DESY.

An FPGA based backup version of the TileCal digitizer

International Nuclear Information System (INIS)

Eriksson, D; Muschter, S; Bohm, C

2010-01-01

The ATLAS Tile Calorimeter front end digitization and readout system comprises about 1800 digitizer boards with two TileDMU ASICs on each board. The TileDMUs are responsible for storing, derandomising and reading out digitized data from twelve ADCs. An ample number of board spares are available. However, a backup solution is desirable in the event of unexpected failure modes. The original version contains both outdated and custom made circuits that are difficult or impossible to find in sufficient numbers. We have developed a new version using inexpensive off the shelf FPGAs (Spartan 6). The FPGAs have all the necessary functionality to emulate the TileDMU and will be readily available for a considerable time. The new board is functionally compatible with the current version and to a large extent uses the same code. The design goal was to leave the digitizer design as intact as possible since it is well tested and performs well. As radiation tolerance is an issue we have implemented triple mode redundancy in the FPGA. To further improve the system we added in system programmability via TTCrx for both the FPGA and the configuration memory using one way JTAG. This provides a way to recover from radiation damage to the configuration PROM or to remotely upgrade system firmware.

An FPGA based backup version of the TileCal digitizer.

Science.gov (United States)

Eriksson, D.; Muschter, S.; Bohm, C.

2010-11-01

The ATLAS Tile Calorimeter front end digitization and readout system comprises about 1800 digitizer boards with two TileDMU ASICs on each board. The TileDMUs are responsible for storing, derandomising and reading out digitized data from twelve ADCs. An ample number of board spares are available. However, a backup solution is desirable in the event of unexpected failure modes. The original version contains both outdated and custom made circuits that are difficult or impossible to find in sufficient numbers. We have developed a new version using inexpensive off the shelf FPGAs (Spartan 6). The FPGAs have all the necessary functionality to emulate the TileDMU and will be readily available for a considerable time. The new board is functionally compatible with the current version and to a large extent uses the same code. The design goal was to leave the digitizer design as intact as possible since it is well tested and performs well. As radiation tolerance is an issue we have implemented triple mode redundancy in the FPGA. To further improve the system we added in system programmability via TTCrx for both the FPGA and the configuration memory using one way JTAG. This provides a way to recover from radiation damage to the configuration PROM or to remotely upgrade system firmware.

A Compute Environment of ABC95 Array Computer Based on Multi-FPGA Chip

Institute of Scientific and Technical Information of China (English)

无

2000-01-01

ABC95 array computer is a multi-function network's computer based on FPGA technology, The multi-function network supports processors conflict-free access data from memory and supports processors access data from processors based on enhanced MESH network.ABC95 instruction's system includes control instructions, scalar instructions, vectors instructions.Mostly net-work instructions are introduced.A programming environment of ABC95 array computer assemble language is designed.A programming environment of ABC95 array computer for VC++ is advanced.It includes load function of ABC95 array computer program and data, store function, run function and so on.Specially, The data type of ABC95 array computer conflict-free access is defined.The results show that these technologies can develop programmer of ABC95 array computer effectively.

Comparative analysis of different AES implementation techniques for efficient resource usage and better performance of an FPGA

Directory of Open Access Journals (Sweden)

Umer Farooq

2017-07-01

Full Text Available Over the past few years, cryptographic algorithms have become increasingly important. Advanced Encryption Standard (AES algorithm was introduced in early 2000. It is widely adopted because of its easy implementation and robust security. In this work, AES is implemented on FPGA using five different techniques. These techniques are based on optimized implementation of AES on FPGA by making efficient resource usage of the target device. Experimental results obtained are quite varying in nature. They range from smallest (suitable for area critical application to fastest (suitable for performance critical applications implementation. Finally, technique making efficient usage of resources leads to frequency of 886.64 MHz and throughput of 113.5 Gb/s with moderate resource consumption on a Spartan-6 device. Furthermore, comparison between proposed technique and existing work shows that our technique has 32% higher frequency, while consuming 2.63× more slice LUTs, 8.33× less slice registers, and 12.59× less LUT-FF pairs.

Development of An Embedded FPGA-Based Data Acquisition System Dedicated to Zero Power Reactor Noise Experiments

Directory of Open Access Journals (Sweden)

Arkani Mohammad

2014-08-01

Full Text Available An embedded time interval data acquisition system (DAS is developed for zero power reactor (ZPR noise experiments. The system is capable of measuring the correlation or probability distribution of a random process. The design is totally implemented on a single Field Programmable Gate Array (FPGA. The architecture is tested on different FPGA platforms with different speed grades and hardware resources. Generic experimental values for time resolution and inter-event dead time of the system are 2.22 ns and 6.67 ns respectively. The DAS can record around 48-bit x 790 kS/s utilizing its built-in fast memory. The system can measure very long time intervals due to its 48-bit timing structure design. As the architecture can work on a typical FPGA, this is a low cost experimental tool and needs little time to be established. In addition, revisions are easily possible through its reprogramming capability. The performance of the system is checked and verified experimentally.

FPGA Implementation of a Frame Synchronization Algorithm for Powerline Communications

Directory of Open Access Journals (Sweden)

S. Tsakiris

2009-09-01

Full Text Available This paper presents an FPGA implementation of a pilot–based time synchronization scheme employing orthogonal frequency division multiplexing for powerline communication channels. The functionality of the algorithm is analyzed and tested over a real powerline residential network. For this purpose, an appropriate transmitter circuit, implemented by an FPGA, and suitable coupling circuits are constructed. The system has been developed using VHDL language on Nallatech XtremeDSP development kits. The communication system operates in the baseband up to 30 MHz. Measurements of the algorithm's good performance in terms of the number of detected frames and timing offset error are taken and compared to simulations of existing algorithms.

An SEU rate prediction method for microprocessors of space applications

International Nuclear Information System (INIS)

Gao Jie; Li Qiang

2012-01-01

In this article,the relationship between static SEU (Single Event Upset) rate and dynamic SEU rate in microprocessors for satellites is studied by using process duty cycle concept and fault injection technique. The results are compared to in-orbit flight monitoring data. The results show that dynamic SEU rate by using process duty cycle can estimate in-orbit SEU rate of microprocessor reasonable; and the fault injection technique is a workable method to estimate SEU rate. (authors)

The new FPGA based discriminator board for the CBELSA/TAPS experiment

Energy Technology Data Exchange (ETDEWEB)

Fix, Eugenia [HISKP, Universitaet Bonn (Germany); Collaboration: CBELSA/TAPS-Collaboration

2016-07-01

The Crystal Barrel calorimeter at ELSA, which consists of 1320 CsI(Tl) crystals has been upgraded by a new Avalanche Photo Diode (APD) crystal readout.The APD readout electronics will provide a fast trigger signal down to 10 MeV energy deposit per single crystal. The processing of these trigger signals requires the development of a previously not existent timing branch of the readout chain of the Crystal Barrel calorimeter. Core component of the timing branch is a newly developed, FPGA based discriminator board. Its firmware contains modules for time to digital conversion, rise time compensation and parts of a cluster finder. In addition the reference voltages and discriminator thresholds are controlled and monitored. This poster presents the design and the achievable accuracy of the new discriminator.

Fuzzy logic type 1 and type 2 based on LabVIEW FPGA

CERN Document Server

Ponce-Cruz, Pedro; MacCleery, Brian

2016-01-01

This book is a comprehensive introduction to LabVIEW FPGA™, a package allowing the programming of intelligent digital controllers in field programmable gate arrays (FPGAs) using graphical code. It shows how both potential difficulties with understanding and programming in VHDL and the consequent difficulty and slowness of implementation can be sidestepped. The text includes a clear theoretical explanation of fuzzy logic (type 1 and type 2) with case studies that implement the theory and systematically demonstrate the implementation process. It goes on to describe basic and advanced levels of programming LabVIEW FPGA and show how implementation of fuzzy-logic control in FPGAs improves system responses. A complete toolkit for implementing fuzzy controllers in LabVIEW FPGA has been developed with the book so that readers can generate new fuzzy controllers and deploy them immediately. Problems and their solutions allow readers to practice the techniques and to absorb the theoretical ideas as they arise. Fuzzy L...

The effect of structural design parameters on FPGA-based feed-forward space-time trellis coding-orthogonal frequency division multiplexing channel encoders

Science.gov (United States)

Passas, Georgios; Freear, Steven; Fawcett, Darren

2010-08-01

Orthogonal frequency division multiplexing (OFDM)-based feed-forward space-time trellis code (FFSTTC) encoders can be synthesised as very high speed integrated circuit hardware description language (VHDL) designs. Evaluation of their FPGA implementation can lead to conclusions that help a designer to decide the optimum implementation, given the encoder structural parameters. VLSI architectures based on 1-bit multipliers and look-up tables (LUTs) are compared in terms of FPGA slices and block RAMs (area), as well as in terms of minimum clock period (speed). Area and speed graphs versus encoder memory order are provided for quadrature phase shift keying (QPSK) and 8 phase shift keying (8-PSK) modulation and two transmit antennas, revealing best implementation under these conditions. The effect of number of modulation bits and transmit antennas on the encoder implementation complexity is also investigated.

Using Simulated Partial Dynamic Run-Time Reconfiguration to Share Embedded FPGA Compute and Power Resources across a Swarm of Unpiloted Airborne Vehicles

Directory of Open Access Journals (Sweden)

Kearney David

2007-01-01

Full Text Available We show how the limited electrical power and FPGA compute resources available in a swarm of small UAVs can be shared by moving FPGA tasks from one UAV to another. A software and hardware infrastructure that supports the mobility of embedded FPGA applications on a single FPGA chip and across a group of networked FPGA chips is an integral part of the work described here. It is shown how to allocate a single FPGA's resources at run time and to share a single device through the use of application checkpointing, a memory controller, and an on-chip run-time reconfigurable network. A prototype distributed operating system is described for managing mobile applications across the swarm based on the contents of a fuzzy rule base. It can move applications between UAVs in order to equalize power use or to enable the continuous replenishment of fully fueled planes into the swarm.

FPGA based Fuzzy Logic Controller for plasma position control in ADITYA Tokamak

International Nuclear Information System (INIS)

Suratia, Pooja; Patel, Jigneshkumar; Rajpal, Rachana; Kotia, Sorum; Govindarajan, J.

2012-01-01

Highlights: ► Evaluation and comparison of the working performance of FLC is done with that of PID Controller. ► FLC is designed using MATLAB Fuzzy Logic Toolbox, and validated on ADITYA RZIP model. ► FLC was implemented on a FPGA. The close-loop testing is done by interfacing FPGA to MATLAB/Simulink. ► Developed FLC controller is able to maintain the plasma column within required range of ±0.05 m and was found to give robust control against various disturbances and faster and smoother response compared to PID Controller. - Abstract: Tokamaks are the most promising devices for obtaining nuclear fusion energy from high-temperature, ionized gas termed as Plasma. The successful operation of tokamak depends on its ability to confine plasma at the geometric center of vacuum vessel with sufficient stability. The quality of plasma discharge in ADITYA Tokamak is strongly related to the radial position of the plasma column in the vacuum vessel. If the plasma column approaches too near to the wall of vacuum vessel, it leads to minor or complete disruption of plasma. Hence the control of plasma position throughout the entire plasma discharge duration is a fundamental requirement. This paper describes Fuzzy Logic Controller (FLC) which is designed for radial plasma position control. This controller is tested and evaluated on the ADITYA RZIP control model. The performance of this FLC was compared with that of Proportional–Integral–Derivative (PID) Controller and the response was found to be faster and smoother. FLC was implemented on a Field Programmable Gate Array (FPGA) chip with the use of a Very High-Speed Integrated-Circuits Hardware Description-Language (VHDL).

FPGA-Based Smart Sensor for Online Displacement Measurements Using a Heterodyne Interferometer

Science.gov (United States)

Vera-Salas, Luis Alberto; Moreno-Tapia, Sandra Veronica; Garcia-Perez, Arturo; de Jesus Romero-Troncoso, Rene; Osornio-Rios, Roque Alfredo; Serroukh, Ibrahim; Cabal-Yepez, Eduardo

2011-01-01

The measurement of small displacements on the nanometric scale demands metrological systems of high accuracy and precision. In this context, interferometer-based displacement measurements have become the main tools used for traceable dimensional metrology. The different industrial applications in which small displacement measurements are employed requires the use of online measurements, high speed processes, open architecture control systems, as well as good adaptability to specific process conditions. The main contribution of this work is the development of a smart sensor for large displacement measurement based on phase measurement which achieves high accuracy and resolution, designed to be used with a commercial heterodyne interferometer. The system is based on a low-cost Field Programmable Gate Array (FPGA) allowing the integration of several functions in a single portable device. This system is optimal for high speed applications where online measurement is needed and the reconfigurability feature allows the addition of different modules for error compensation, as might be required by a specific application. PMID:22164040

High-speed real-time OFDM transmission based on FPGA

Science.gov (United States)

Xiao, Xin; Li, Fan; Yu, Jianjun

2016-02-01

In this paper, we review our recent research progresses on real-time orthogonal frequency division multiplexing (OFDM) transmission based on FPGA. We successfully demonstrated four-channel wavelength-division multiplexing (WDM) 256.51Gb/s 16-ary quadrature amplitude modulation (16QAM)-OFDM signal transmission system for short-reach optical amplifier free inter-connection with real-time reception. Four optical carriers are modulated by four different 16QAM-OFDM signals via 10G-class direct modulation lasers (DMLs). We achieved highest capacity real-time reception optical OFDM signal transmission over 2.4-km SMF with the bit-error ratio (BER) under soft-decision forward error correction (SD-FEC) limitation of 2.4×10-2. In order to achieve higher spectrum efficiency (SE), we demonstrate 4-channel high level QAM-OFDM transmission over 20-km SMF-28 with real-time reception. 58.72-Gb/s 256QAM-OFDM and 56.4-Gb/s 128QAM-OFDM signal transmission within 25-GHz grid is achieved with the BER under 2.4×10-2 and real-time reception.

Design exploration and verification platform, based on high-level modeling and FPGA prototyping, for fast and flexible digital communication in physics experiments

International Nuclear Information System (INIS)

Magazzù, G; Borgese, G; Costantino, N; Fanucci, L; Saponara, S; Incandela, J

2013-01-01

In many research fields as high energy physics (HEP), astrophysics, nuclear medicine or space engineering with harsh operating conditions, the use of fast and flexible digital communication protocols is becoming more and more important. The possibility to have a smart and tested top-down design flow for the design of a new protocol for control/readout of front-end electronics is very useful. To this aim, and to reduce development time, costs and risks, this paper describes an innovative design/verification flow applied as example case study to a new communication protocol called FF-LYNX. After the description of the main FF-LYNX features, the paper presents: the definition of a parametric SystemC-based Integrated Simulation Environment (ISE) for high-level protocol definition and validation; the set up of figure of merits to drive the design space exploration; the use of ISE for early analysis of the achievable performances when adopting the new communication protocol and its interfaces for a new (or upgraded) physics experiment; the design of VHDL IP cores for the TX and RX protocol interfaces; their implementation on a FPGA-based emulator for functional verification and finally the modification of the FPGA-based emulator for testing the ASIC chipset which implements the rad-tolerant protocol interfaces. For every step, significant results will be shown to underline the usefulness of this design and verification approach that can be applied to any new digital protocol development for smart detectors in physics experiments.

Design exploration and verification platform, based on high-level modeling and FPGA prototyping, for fast and flexible digital communication in physics experiments

Science.gov (United States)

Magazzù, G.; Borgese, G.; Costantino, N.; Fanucci, L.; Incandela, J.; Saponara, S.

2013-02-01

In many research fields as high energy physics (HEP), astrophysics, nuclear medicine or space engineering with harsh operating conditions, the use of fast and flexible digital communication protocols is becoming more and more important. The possibility to have a smart and tested top-down design flow for the design of a new protocol for control/readout of front-end electronics is very useful. To this aim, and to reduce development time, costs and risks, this paper describes an innovative design/verification flow applied as example case study to a new communication protocol called FF-LYNX. After the description of the main FF-LYNX features, the paper presents: the definition of a parametric SystemC-based Integrated Simulation Environment (ISE) for high-level protocol definition and validation; the set up of figure of merits to drive the design space exploration; the use of ISE for early analysis of the achievable performances when adopting the new communication protocol and its interfaces for a new (or upgraded) physics experiment; the design of VHDL IP cores for the TX and RX protocol interfaces; their implementation on a FPGA-based emulator for functional verification and finally the modification of the FPGA-based emulator for testing the ASIC chipset which implements the rad-tolerant protocol interfaces. For every step, significant results will be shown to underline the usefulness of this design and verification approach that can be applied to any new digital protocol development for smart detectors in physics experiments.

Timing measurements of some tracking algorithms and suitability of FPGA's to improve the execution speed

CERN Document Server

Khomich, A; Kugel, A; Männer, R; Müller, M; Baines, J T M

2003-01-01

Some of track reconstruction algorithms which are common to all B-physics channels and standard RoI processing have been tested for execution time and assessed for suitability for speed-up by using FPGA coprocessor. The studies presented in this note were performed in the C/C++ framework, CTrig, which was the fullest set of algorithms available at the time of study For investigation of possible speed-up of algorithms most time consuming parts of TRT-LUT was implemented in VHDL for running in FPGA coprocessor board MPRACE. MPRACE (Reconfigurable Accelerator / Computing Engine) is an FPGA-Coprocessor based on Xilinx Virtex-2 FPGA and made as 64Bit/66MHz PCI card developed at the University of Mannheim. Timing measurements results for a TRT Full Scan algorithm executed on the MPRACE are presented here as well. The measurement results show a speed-up factor of ~2 for this algorithm.

FPGA-based implementation for steganalysis: a JPEG-compatibility algorithm

Science.gov (United States)

Gutierrez-Fernandez, E.; Portela-García, M.; Lopez-Ongil, C.; Garcia-Valderas, M.

2013-05-01

Steganalysis is a process to detect hidden data in cover documents, like digital images, videos, audio files, etc. This is the inverse process of steganography, which is the used method to hide secret messages. The widely use of computers and network technologies make digital files very easy-to-use means for storing secret data or transmitting secret messages through the Internet. Depending on the cover medium used to embed the data, there are different steganalysis methods. In case of images, many of the steganalysis and steganographic methods are focused on JPEG image formats, since JPEG is one of the most common formats. One of the main important handicaps of steganalysis methods is the processing speed, since it is usually necessary to process huge amount of data or it can be necessary to process the on-going internet traffic in real-time. In this paper, a JPEG steganalysis system is implemented in an FPGA in order to speed-up the detection process with respect to software-based implementations and to increase the throughput. In particular, the implemented method is the JPEG-compatibility detection algorithm that is based on the fact that when a JPEG image is modified, the resulting image is incompatible with the JPEG compression process.

SSTL I/O Standard Based Arithmetic Circuits Design on FPGA

DEFF Research Database (Denmark)

Goswami, Kavita; Pandey, Bishwajeet; Hussain, Dil muhammed Akbar

2016-01-01

-Tiryagbhyam”. SSTL135_R is minimum I/O power consumer. SSTL135_DCI is maximum power consumer. When we use SSTL135_R in place of SSTL12, SSTL12_DCI, SSTL15, and SSTL135_DCI, there is 42.5%, 82.7%, 28.12%, and 72.9% reduction in I/O power at 21oC, 40oC, 53.5oC and 56.7oC. This design is implemented on Artix-7 FPGA...

An SEU analysis approach for error propagation in digital VLSI CMOS ASICs

International Nuclear Information System (INIS)

Baze, M.P.; Bartholet, W.G.; Dao, T.A.; Buchner, S.

1995-01-01

A critical issue in the development of ASIC designs is the ability to achieve first pass fabrication success. Unsuccessful fabrication runs have serious impact on ASIC costs and schedules. The ability to predict an ASICs radiation response prior to fabrication is therefore a key issue when designing ASICs for military and aerospace systems. This paper describes an analysis approach for calculating static bit error propagation in synchronous VLSI CMOS circuits developed as an aid for predicting the SEU response of ASIC's. The technique is intended for eventual application as an ASIC development simulation tool which can be used by circuit design engineers for performance evaluation during the pre-fabrication design process in much the same way that logic and timing simulators are used

FPGA implementation for real-time background subtraction based on Horprasert model.

Science.gov (United States)

Rodriguez-Gomez, Rafael; Fernandez-Sanchez, Enrique J; Diaz, Javier; Ros, Eduardo

2012-01-01

Background subtraction is considered the first processing stage in video surveillance systems, and consists of determining objects in movement in a scene captured by a static camera. It is an intensive task with a high computational cost. This work proposes an embedded novel architecture on FPGA which is able to extract the background on resource-limited environments and offers low degradation (produced because of the hardware-friendly model modification). In addition, the original model is extended in order to detect shadows and improve the quality of the segmentation of the moving objects. We have analyzed the resource consumption and performance in Spartan3 Xilinx FPGAs and compared to others works available on the literature, showing that the current architecture is a good trade-off in terms of accuracy, performance and resources utilization. With less than a 65% of the resources utilization of a XC3SD3400 Spartan-3A low-cost family FPGA, the system achieves a frequency of 66.5 MHz reaching 32.8 fps with resolution 1,024 × 1,024 pixels, and an estimated power consumption of 5.76 W.

FPGA Implementation for Real-Time Background Subtraction Based on Horprasert Model

Directory of Open Access Journals (Sweden)

Eduardo Ros

2012-01-01

Full Text Available Background subtraction is considered the first processing stage in video surveillance systems, and consists of determining objects in movement in a scene captured by a static camera. It is an intensive task with a high computational cost. This work proposes an embedded novel architecture on FPGA which is able to extract the background on resource-limited environments and offers low degradation (produced because of the hardware-friendly model modification. In addition, the original model is extended in order to detect shadows and improve the quality of the segmentation of the moving objects. We have analyzed the resource consumption and performance in Spartan3 Xilinx FPGAs and compared to others works available on the literature, showing that the current architecture is a good trade-off in terms of accuracy, performance and resources utilization. With less than a 65% of the resources utilization of a XC3SD3400 Spartan-3A low-cost family FPGA, the system achieves a frequency of 66.5 MHz reaching 32.8 fps with resolution 1,024 x 1,024 pixels, and an estimated power consumption of 5.76 W.

Method to implement the CCD timing generator based on FPGA

Science.gov (United States)

Li, Binhua; Song, Qian; He, Chun; Jin, Jianhui; He, Lin

2010-07-01

With the advance of the PFPA technology, the design methodology of digital systems is changing. In recent years we develop a method to implement the CCD timing generator based on FPGA and VHDL. This paper presents the principles and implementation skills of the method. Taking a developed camera as an example, we introduce the structure, input and output clocks/signals of a timing generator implemented in the camera. The generator is composed of a top module and a bottom module. The bottom one is made up of 4 sub-modules which correspond to 4 different operation modes. The modules are implemented by 5 VHDL programs. Frame charts of the architecture of these programs are shown in the paper. We also describe implementation steps of the timing generator in Quartus II, and the interconnections between the generator and a Nios soft core processor which is the controller of this generator. Some test results are presented in the end.

Dual-Phase Lock-In Amplifier Based on FPGA for Low-Frequencies Experiments

Directory of Open Access Journals (Sweden)

Gonzalo Macias-Bobadilla

2016-03-01

Full Text Available Photothermal techniques allow the detection of characteristics of material without invading it. Researchers have developed hardware for some specific Phase and Amplitude detection (Lock-In Function applications, eliminating space and unnecessary electronic functions, among others. This work shows the development of a Digital Lock-In Amplifier based on a Field Programmable Gate Array (FPGA for low-frequency applications. This system allows selecting and generating the appropriated frequency depending on the kind of experiment or material studied. The results show good frequency stability in the order of 1.0 × 10−9 Hz, which is considered good linearity and repeatability response for the most common Laboratory Amplitude and Phase Shift detection devices, with a low error and standard deviation.

FPGA platform for MEMS Disc Resonance Gyroscope (DRG) control

Science.gov (United States)

Keymeulen, Didier; Peay, Chris; Foor, David; Trung, Tran; Bakhshi, Alireza; Withington, Phil; Yee, Karl; Terrile, Rich

2008-04-01

Inertial navigation systems based upon optical gyroscopes tend to be expensive, large, power consumptive, and are not long lived. Micro-Electromechanical Systems (MEMS) based gyros do not have these shortcomings; however, until recently, the performance of MEMS based gyros had been below navigation grade. Boeing and JPL have been cooperating since 1997 to develop high performance MEMS gyroscopes for miniature, low power space Inertial Reference Unit applications. The efforts resulted in demonstration of a Post Resonator Gyroscope (PRG). This experience led to the more compact Disc Resonator Gyroscope (DRG) for further reduced size and power with potentially increased performance. Currently, the mass, volume and power of the DRG are dominated by the size of the electronics. This paper will detail the FPGA based digital electronics architecture and its implementation for the DRG which will allow reduction of size and power and will increase performance through a reduction in electronics noise. Using the digital control based on FPGA, we can program and modify in real-time the control loop to adapt to the specificity of each particular gyro and the change of the mechanical characteristic of the gyro during its life time.

An Efficient, FPGA-Based, Cluster Detection Algorithm Implementation for a Strip Detector Readout System in a Time Projection Chamber Polarimeter

Science.gov (United States)

Gregory, Kyle J.; Hill, Joanne E. (Editor); Black, J. Kevin; Baumgartner, Wayne H.; Jahoda, Keith

2016-01-01

A fundamental challenge in a spaceborne application of a gas-based Time Projection Chamber (TPC) for observation of X-ray polarization is handling the large amount of data collected. The TPC polarimeter described uses the APV-25 Application Specific Integrated Circuit (ASIC) to readout a strip detector. Two dimensional photoelectron track images are created with a time projection technique and used to determine the polarization of the incident X-rays. The detector produces a 128x30 pixel image per photon interaction with each pixel registering 12 bits of collected charge. This creates challenging requirements for data storage and downlink bandwidth with only a modest incidence of photons and can have a significant impact on the overall mission cost. An approach is described for locating and isolating the photoelectron track within the detector image, yielding a much smaller data product, typically between 8x8 pixels and 20x20 pixels. This approach is implemented using a Microsemi RT-ProASIC3-3000 Field-Programmable Gate Array (FPGA), clocked at 20 MHz and utilizing 10.7k logic gates (14% of FPGA), 20 Block RAMs (17% of FPGA), and no external RAM. Results will be presented, demonstrating successful photoelectron track cluster detection with minimal impact to detector dead-time.

FPGA-based multichannel optical concentrator SIMCON 4.0 for TESLA cavities LLRF control system

Science.gov (United States)

Perkuszewski, Karol; Pozniak, Krzysztof T.; Jalmuzna, Wojciech; Koprek, Waldemar; Szewinski, Jaroslaw; Romaniuk, Ryszard S.; Simrock, Stefan

2006-10-01

The paper presents an idea, design and realization of a gigabit, optoelectronic synchronous massive data concentrator for the LLRF control system for FLASH and XFEL superconducting accelerators and lasers. The design bases on a central, large, programmable FPGA VirtexIIPro circuit by Xilinx and on eight commercial optoelectronic transceivers. There were implemented peripheral devices for embedded PowerPC block like: memory and Ethernet. The SIMCON 4.0 module was realized as a single, standard EURO-6HE board with VXI/VME-bus. Hardware implementation was described for the most important functional blocks. Construction solutions were presented.

FPGA based multichannel optical concentrator SIMCON 4.0 for TESLA cavities LLRF control system

International Nuclear Information System (INIS)

Perkuszewski, K.; Pozniak, K.T.; Jalmuzna, W.; Koprek, W.; Szewinski, J.; Romaniuk, R.S.

2006-01-01

The paper presents an idea, design and realization of a gigabit, optoelectronic synchronous massive data concentrator for the LLRF control system for FLASH and XFEL superconducting accelerators and lasers. The design bases on a central, large, programmable FPGA VirtexIIPro circuit by Xilinx and on eight commercial optoelectronic transceivers. There were implemented peripheral devices for embedded PowerPC block like: memory and Ethernet. The SIMCON 4.0 module was realized as a single, standard EURO-6HE board with VXI/VME-bus. Hardware implementation was described for the most important functional blocks. Construction solutions were presented. (orig.)

FPGA based multichannel optical concentrator SIMCON 4.0 for TESLA cavities LLRF control system

Energy Technology Data Exchange (ETDEWEB)

Perkuszewski, K.; Pozniak, K.T.; Jalmuzna, W.; Koprek, W.; Szewinski, J.; Romaniuk, R.S. [Warsaw Univ. of Technology (Poland). Inst. of Electronic Systems; Simrock, S. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

2006-07-01

The paper presents an idea, design and realization of a gigabit, optoelectronic synchronous massive data concentrator for the LLRF control system for FLASH and XFEL superconducting accelerators and lasers. The design bases on a central, large, programmable FPGA VirtexIIPro circuit by Xilinx and on eight commercial optoelectronic transceivers. There were implemented peripheral devices for embedded PowerPC block like: memory and Ethernet. The SIMCON 4.0 module was realized as a single, standard EURO-6HE board with VXI/VME-bus. Hardware implementation was described for the most important functional blocks. Construction solutions were presented. (orig.)

FPGA Implementation of Block Parallel DF-MPIC Detectors for DS-CDMA Systems in Frequency-Nonselective Channels

Directory of Open Access Journals (Sweden)

Adel Omar Dahmane

2008-01-01

Full Text Available Multistage parallel interference cancellation- (MPIC- based detectors allow to mitigate multiple-access interference in direct-sequence code-division multiple-access (DS-CDMA systems. They are considered serious candidates for practical implementation showing a good tradeoff between performance and complexity. Better performance is obtained when decision feedback (DF is employed. Although MPIC and DF-MPIC have the same arithmetic complexity, DF-MPIC needs much more FPGA resources when compared to MPIC without decision feedback. In this letter, FPGA implementation of block parallel DF-MPIC (BP-DF-MPIC is proposed allowing better tradeoff between performance and FPGA area occupancy. To reach an uncoded bit-error rate of 10−3, BP-DF-MPIC shows a 1.5 dB improvement over the MPIC without decision feedback with only 8% increase in FPGA resources compared to 69% for DF-MPIC.

Multi-DSP and FPGA based Multi-channel Direct IF/RF Digital receiver for atmospheric radar

Science.gov (United States)

Yasodha, Polisetti; Jayaraman, Achuthan; Kamaraj, Pandian; Durga rao, Meka; Thriveni, A.

2016-07-01

to DDC block, which down converts the data to base-band. The DDC block has NCO, mixer and two chains of Bessel filters (fifth order cascaded integration comb filter, two FIR filters, two half band filters and programmable FIR filters) for in-phase (I) and Quadrature phase (Q) channels. The NCO has 32 bits and is set to match the output frequency of ADC. Further, DDC down samples (decimation) the data and reduces the data rate to 16 MSPS. This data is further decimated and the data rate is reduced down to 4/2/1/0.5/0.25/0.125/0.0625 MSPS for baud lengths 0.25/0.5/1/2/4/8/16 μs respectively. The down sampled data is then fed to decoding block, which performs cross correlation to achieve pulse compression of the binary-phase coded data to obtain better range resolution with maximum possible height coverage. This step improves the signal power by a factor equal to the length of the code. Coherent integration block integrates the decoded data coherently for successive pulses, which improves the signal to noise ratio and reduces the data volume. DDC, decoding and coherent integration blocks are implemented in Xilinx vertex5 FPGA. Till this point, function of all six channels is same for DBS mode and multi-receiver modes. Data from vertex5 FPGA is transferred to PC via GbE-1 interface for multi-modes or to two Analog devices make ADSP-TS201 DSP chips (A and B), via link port for DBS mode. ADSP-TS201 chips perform the normalization, DC removal, windowing, FFT computation and spectral averaging on the data, which is transferred to storage/display PC via GbE-2 interface for real-time data display and data storing. Physical layer of GbE interface is implemented in an external chip (Marvel 88E1111) and MAC layer is implemented internal to vertex5 FPGA. The MCDRx has total 4 GB of DDR2 memory for data storage. Spartan6 FPGA is used for generating timing signals, required for basic operation of the radar and testing of the MCDRx.

An FPGA Based Implementation for Real-Time Processing of the LHC Beam Loss Monitoring System's Data

CERN Document Server

Dehning, B; Emery, J; Ferioli, G; Zamantzas, C

2006-01-01

The strategy for machine protection and quench prevention of the Large Hadron Collider (LHC) at the European Organisation for Nuclear Research (CERN) is mainly based on the Beam Loss Monitoring (BLM) system. At each turn, there will be several thousands of data to record and process in order to decide if the beams should be permitted to continue circulating or their safe extraction is necessary to be triggered. The processing involves a proper analysis of the loss pattern in time and for the decision the energy of the beam needs to be accounted. This complexity needs to be minimized by all means to maximize the reliability of the BLM system and allow a feasible implementation. In this paper, a field programmable gate array (FPGA) based implementation is explored for the real-time processing of the LHC BLM data. It gives emphasis on the highly efficient Successive Running Sums (SRS) technique used that allows many and long integration periods to be maintained for each detector's data with relatively small leng...

FPGA based, modular, configurable controller with fast synchronous optical network

Energy Technology Data Exchange (ETDEWEB)

Graczyk, R.; Pozniak, K.T.; Romaniuk, R.S. [Warsaw Univ. of Technology (Poland). Inst. of Electronic Systems

2006-07-01

The paper describes a configurable controller equipped with programmable VLSI FPGA circuit, universal expansion modules PMC, synchronous, optical, multi-gigabit links, commonly used industrial and computer communication interfaces, Ethernet 100TB, system of automatic initialization ACE etc. There are characterized the basic functional characteristics of the device. The possibilities of its usage in various work modes were presented. Realization of particular blocks of the device were discussed. Resulting, during the realization of this project, new hardware layer solutions were also characterized. (orig.)

FPGA based, modular, configurable controller with fast synchronous optical network

International Nuclear Information System (INIS)

Graczyk, R.; Pozniak, K.T.; Romaniuk, R.S.

2006-01-01

The paper describes a configurable controller equipped with programmable VLSI FPGA circuit, universal expansion modules PMC, synchronous, optical, multi-gigabit links, commonly used industrial and computer communication interfaces, Ethernet 100TB, system of automatic initialization ACE etc. There are characterized the basic functional characteristics of the device. The possibilities of its usage in various work modes were presented. Realization of particular blocks of the device were discussed. Resulting, during the realization of this project, new hardware layer solutions were also characterized. (orig.)

Hardware and Software Design of FPGA-based PCIe Gen3 interface for APEnet+ network interconnect system

Science.gov (United States)

Ammendola, R.; Biagioni, A.; Frezza, O.; Lo Cicero, F.; Lonardo, A.; Martinelli, M.; Paolucci, P. S.; Pastorelli, E.; Rossetti, D.; Simula, F.; Tosoratto, L.; Vicini, P.

2015-12-01

In the attempt to develop an interconnection architecture optimized for hybrid HPC systems dedicated to scientific computing, we designed APEnet+, a point-to-point, low-latency and high-performance network controller supporting 6 fully bidirectional off-board links over a 3D torus topology. The first release of APEnet+ (named V4) was a board based on a 40 nm Altera FPGA, integrating 6 channels at 34 Gbps of raw bandwidth per direction and a PCIe Gen2 x8 host interface. It has been the first-of-its-kind device to implement an RDMA protocol to directly read/write data from/to Fermi and Kepler NVIDIA GPUs using NVIDIA peer-to-peer and GPUDirect RDMA protocols, obtaining real zero-copy GPU-to-GPU transfers over the network. The latest generation of APEnet+ systems (now named V5) implements a PCIe Gen3 x8 host interface on a 28 nm Altera Stratix V FPGA, with multi-standard fast transceivers (up to 14.4 Gbps) and an increased amount of configurable internal resources and hardware IP cores to support main interconnection standard protocols. Herein we present the APEnet+ V5 architecture, the status of its hardware and its system software design. Both its Linux Device Driver and the low-level libraries have been redeveloped to support the PCIe Gen3 protocol, introducing optimizations and solutions based on hardware/software co-design.

A FPGA-Based, Granularity-Variable Neuromorphic Processor and Its Application in a MIMO Real-Time Control System.

Science.gov (United States)

Zhang, Zhen; Ma, Cheng; Zhu, Rong

2017-08-23

Artificial Neural Networks (ANNs), including Deep Neural Networks (DNNs), have become the state-of-the-art methods in machine learning and achieved amazing success in speech recognition, visual object recognition, and many other domains. There are several hardware platforms for developing accelerated implementation of ANN models. Since Field Programmable Gate Array (FPGA) architectures are flexible and can provide high performance per watt of power consumption, they have drawn a number of applications from scientists. In this paper, we propose a FPGA-based, granularity-variable neuromorphic processor (FBGVNP). The traits of FBGVNP can be summarized as granularity variability, scalability, integrated computing, and addressing ability: first, the number of neurons is variable rather than constant in one core; second, the multi-core network scale can be extended in various forms; third, the neuron addressing and computing processes are executed simultaneously. These make the processor more flexible and better suited for different applications. Moreover, a neural network-based controller is mapped to FBGVNP and applied in a multi-input, multi-output, (MIMO) real-time, temperature-sensing and control system. Experiments validate the effectiveness of the neuromorphic processor. The FBGVNP provides a new scheme for building ANNs, which is flexible, highly energy-efficient, and can be applied in many areas.

A FPGA-Based, Granularity-Variable Neuromorphic Processor and Its Application in a MIMO Real-Time Control System

Directory of Open Access Journals (Sweden)

Zhen Zhang

2017-08-01

Full Text Available Artificial Neural Networks (ANNs, including Deep Neural Networks (DNNs, have become the state-of-the-art methods in machine learning and achieved amazing success in speech recognition, visual object recognition, and many other domains. There are several hardware platforms for developing accelerated implementation of ANN models. Since Field Programmable Gate Array (FPGA architectures are flexible and can provide high performance per watt of power consumption, they have drawn a number of applications from scientists. In this paper, we propose a FPGA-based, granularity-variable neuromorphic processor (FBGVNP. The traits of FBGVNP can be summarized as granularity variability, scalability, integrated computing, and addressing ability: first, the number of neurons is variable rather than constant in one core; second, the multi-core network scale can be extended in various forms; third, the neuron addressing and computing processes are executed simultaneously. These make the processor more flexible and better suited for different applications. Moreover, a neural network-based controller is mapped to FBGVNP and applied in a multi-input, multi-output, (MIMO real-time, temperature-sensing and control system. Experiments validate the effectiveness of the neuromorphic processor. The FBGVNP provides a new scheme for building ANNs, which is flexible, highly energy-efficient, and can be applied in many areas.

A FPGA Embedded Web Server for Remote Monitoring and Control of Smart Sensors Networks

Science.gov (United States)

Magdaleno, Eduardo; Rodríguez, Manuel; Pérez, Fernando; Hernández, David; García, Enrique

2014-01-01

This article describes the implementation of a web server using an embedded Altera NIOS II IP core, a general purpose and configurable RISC processor which is embedded in a Cyclone FPGA. The processor uses the μCLinux operating system to support a Boa web server of dynamic pages using Common Gateway Interface (CGI). The FPGA is configured to act like the master node of a network, and also to control and monitor a network of smart sensors or instruments. In order to develop a totally functional system, the FPGA also includes an implementation of the time-triggered protocol (TTP/A). Thus, the implemented master node has two interfaces, the webserver that acts as an Internet interface and the other to control the network. This protocol is widely used to connecting smart sensors and actuators and microsystems in embedded real-time systems in different application domains, e.g., industrial, automotive, domotic, etc., although this protocol can be easily replaced by any other because of the inherent characteristics of the FPGA-based technology. PMID:24379047

A FPGA embedded web server for remote monitoring and control of smart sensors networks.

Science.gov (United States)

Magdaleno, Eduardo; Rodríguez, Manuel; Pérez, Fernando; Hernández, David; García, Enrique

2013-12-27

This article describes the implementation of a web server using an embedded Altera NIOS II IP core, a general purpose and configurable RISC processor which is embedded in a Cyclone FPGA. The processor uses the μCLinux operating system to support a Boa web server of dynamic pages using Common Gateway Interface (CGI). The FPGA is configured to act like the master node of a network, and also to control and monitor a network of smart sensors or instruments. In order to develop a totally functional system, the FPGA also includes an implementation of the time-triggered protocol (TTP/A). Thus, the implemented master node has two interfaces, the webserver that acts as an Internet interface and the other to control the network. This protocol is widely used to connecting smart sensors and actuators and microsystems in embedded real-time systems in different application domains, e.g., industrial, automotive, domotic, etc., although this protocol can be easily replaced by any other because of the inherent characteristics of the FPGA-based technology.

A FPGA Embedded Web Server for Remote Monitoring and Control of Smart Sensors Networks

Directory of Open Access Journals (Sweden)

Eduardo Magdaleno

2013-12-01

Full Text Available This article describes the implementation of a web server using an embedded Altera NIOS II IP core, a general purpose and configurable RISC processor which is embedded in a Cyclone FPGA. The processor uses the μCLinux operating system to support a Boa web server of dynamic pages using Common Gateway Interface (CGI. The FPGA is configured to act like the master node of a network, and also to control and monitor a network of smart sensors or instruments. In order to develop a totally functional system, the FPGA also includes an implementation of the time-triggered protocol (TTP/A. Thus, the implemented master node has two interfaces, the webserver that acts as an Internet interface and the other to control the network. This protocol is widely used to connecting smart sensors and actuators and microsystems in embedded real-time systems in different application domains, e.g., industrial, automotive, domotic, etc., although this protocol can be easily replaced by any other because of the inherent characteristics of the FPGA-based technology.

Implementation of a RANLUX Based Pseudo-Random Number Generator in FPGA Using VHDL and Impulse C

OpenAIRE

Agnieszka Dąbrowska-Boruch; Grzegorz Gancarczyk; Kazimierz Wiatr

2014-01-01

Monte Carlo simulations are widely used e.g. in the field of physics and molecular modelling. The main role played in these is by the high performance random number generators, such as RANLUX or MERSSENE TWISTER. In this paper the authors introduce the world's first implementation of the RANLUX algorithm on an FPGA platform for high performance computing purposes. A significant speed-up of one generator instance over 60 times, compared with a graphic card based solution, can be noticed. Compa...

Desain Protokol Suara Sebagai Pengendali Dalam Smart Home Menggunakan FPGA

Directory of Open Access Journals (Sweden)

Barlian Henryranu Prasetio

2017-05-01

Smart home is a system that uses computers and information technology to control home-like equipment such as windows and lights. The system can be a simple control system to a complex system. Computer / microcontroller based on internet/ethernet network equipped with intelligent system and automation system so as to make home to work automatically. Many computer devices / microcontrollers that can be implemented as a controller in the smart home. Smart home control system in this study using Xilinx xpartan-3e that controls the equipment in the house through LAN (Local Area Networking. This control system communicates using broadcast voice on the local network. The Controller System is designed to be able to transmit a voice signal packet from the microphone input and then send it using the ethernet protocol in the home local network using the FPGA. The FPGA is programmed to transmit and encode data packets, converting digital data into analog data to be able to control the equipment in the home. From the simulation test results using ISIM, it is seen that the system works in realtime. Keywords: smart home, voice, fpga, control

Superconducting cavity driving with FPGA controller

Energy Technology Data Exchange (ETDEWEB)

Czarski, T.; Koprek, W.; Pozniak, K.T.; Romaniuk, R.S. [Warsaw Univ. of Technology (Poland); Simrock, S.; Brand, A. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Chase, B.; Carcagno, R.; Cancelo, G. [Fermi National Accelerator Lab., Batavia, IL (United States); Koeth, T.W. [Rutgers - the State Univ. of New Jersey, NJ (United States)

2006-07-01

The digital control of several superconducting cavities for a linear accelerator is presented. The laboratory setup of the CHECHIA cavity and ACC1 module of the VU-FEL TTF in DESY-Hamburg have both been driven by a Field Programmable Gate Array (FPGA) based system. Additionally, a single 9-cell TESLA Superconducting cavity of the FNPL Photo Injector at FERMILAB has been remotely controlled from WUT-ISE laboratory with the support of the DESY team using the same FPGA control system. These experiments focused attention on the general recognition of the cavity features and projected control methods. An electrical model of the resonator was taken as a starting point. Calibration of the signal path is considered key in preparation for the efficient driving of a cavity. Identification of the resonator parameters has been proven to be a successful approach in achieving required performance; i.e. driving on resonance during filling and field stabilization during flattop time while requiring reasonable levels of power consumption. Feed-forward and feedback modes were successfully applied in operating the cavities. Representative results of the experiments are presented for different levels of the cavity field gradient. (orig.)

Superconducting cavity driving with FPGA controller

International Nuclear Information System (INIS)

Czarski, T.; Koprek, W.; Pozniak, K.T.; Romaniuk, R.S.; Simrock, S.; Brand, A.; Chase, B.; Carcagno, R.; Cancelo, G.; Koeth, T.W.

2006-01-01

The digital control of several superconducting cavities for a linear accelerator is presented. The laboratory setup of the CHECHIA cavity and ACC1 module of the VU-FEL TTF in DESY-Hamburg have both been driven by a Field Programmable Gate Array (FPGA) based system. Additionally, a single 9-cell TESLA Superconducting cavity of the FNPL Photo Injector at FERMILAB has been remotely controlled from WUT-ISE laboratory with the support of the DESY team using the same FPGA control system. These experiments focused attention on the general recognition of the cavity features and projected control methods. An electrical model of the resonator was taken as a starting point. Calibration of the signal path is considered key in preparation for the efficient driving of a cavity. Identification of the resonator parameters has been proven to be a successful approach in achieving required performance; i.e. driving on resonance during filling and field stabilization during flattop time while requiring reasonable levels of power consumption. Feed-forward and feedback modes were successfully applied in operating the cavities. Representative results of the experiments are presented for different levels of the cavity field gradient. (orig.)

FPGA-based GEM detector signal acquisition for SXR spectroscopy system

Science.gov (United States)

Wojenski, A.; Pozniak, K. T.; Kasprowicz, G.; Kolasinski, P.; Krawczyk, R.; Zabolotny, W.; Chernyshova, M.; Czarski, T.; Malinowski, K.

2016-11-01

The presented work is related to the Gas Electron Multiplier (GEM) detector soft X-ray spectroscopy system for tokamak applications. The used GEM detector has one-dimensional, 128 channel readout structure. The channels are connected to the radiation-hard electronics with configurable analog stage and fast ADCs, supporting speeds of 125 MSPS for each channel. The digitalized data is sent directly to the FPGAs using fast serial links. The preprocessing algorithms are implemented in the FPGAs, with the data buffering made in the on-board 2Gb DDR3 memory chips. After the algorithmic stage, the data is sent to the Intel Xeon-based PC for further postprocessing using PCI-Express link Gen 2. For connection of multiple FPGAs, PCI-Express switch 8-to-1 was designed. The whole system can support up to 2048 analog channels. The scope of the work is an FPGA-based implementation of the recorder of the raw signal from GEM detector. Since the system will work in a very challenging environment (neutron radiation, intense electro-magnetic fields), the registered signals from the GEM detector can be corrupted. In the case of the very intense hot plasma radiation (e.g. laser generated plasma), the registered signals can overlap. Therefore, it is valuable to register the raw signals from the GEM detector with high number of events during soft X-ray radiation. The signal analysis will have the direct impact on the implementation of photon energy computation algorithms. As the result, the system will produce energy spectra and topological distribution of soft X-ray radiation. The advanced software was developed in order to perform complex system startup and monitoring of hardware units. Using the array of two one-dimensional GEM detectors it will be possible to perform tomographic reconstruction of plasma impurities radiation in the SXR region.

FPGA based high-performance multi-channel analyzer with local histogram memory

International Nuclear Information System (INIS)

Kulkarni, C.P.; Vaidya, P.P.; Paulson, M.

2004-01-01

Modern nuclear spectroscopy systems demand for a Multi-Channel Analyzer (MCA) with higher resolution, faster speed and other advanced features. The MCA described here is targeted for such demanding applications. The MCA has an in-built local histogram memory and a memory management unit integrated in an FPGA (Field Programmable Gate Array) chip. In addition to the integrated low power digital circuitry, the system utilizes state of the art advanced analog circuits like low power, high speed and high precision comparators, op-amps, ADC and DAC. The operating resolution is selectable from 256 channels to 16384 channels for pulse height analysis. It supports high count rate applications (typically 100 KHz) without significant dead time penalty. It can have an USB bus interface with simple changes. In general, the MCA gives a high performance, compact and low power alternative for portable and battery operated systems as well as for high end laboratory instruments. (author)

Embedded Platform for Automatic Testing and Optimizing of FPGA Based Cryptographic True Random Number Generators

Directory of Open Access Journals (Sweden)

M. Varchola

2009-12-01

Full Text Available This paper deals with an evaluation platform for cryptographic True Random Number Generators (TRNGs based on the hardware implementation of statistical tests for FPGAs. It was developed in order to provide an automatic tool that helps to speed up the TRNG design process and can provide new insights on the TRNG behavior as it will be shown on a particular example in the paper. It enables to test sufficient statistical properties of various TRNG designs under various working conditions on the fly. Moreover, the tests are suitable to be embedded into cryptographic hardware products in order to recognize TRNG output of weak quality and thus increase its robustness and reliability. Tests are fully compatible with the FIPS 140 standard and are implemented by the VHDL language as an IP-Core for vendor independent FPGAs. A recent Flash based Actel Fusion FPGA was chosen for preliminary experiments. The Actel version of the tests possesses an interface to the Actel’s CoreMP7 softcore processor that is fully compatible with the industry standard ARM7TDMI. Moreover, identical tests suite was implemented to the Xilinx Virtex 2 and 5 in order to compare the performance of the proposed solution with the performance of already published one based on the same FPGAs. It was achieved 25% and 65% greater clock frequency respectively while consuming almost equal resources of the Xilinx FPGAs. On the top of it, the proposed FIPS 140 architecture is capable of processing one random bit per one clock cycle which results in 311.5 Mbps throughput for Virtex 5 FPGA.

An Improved Minimum Error Interpolator of CNC for General Curves Based on FPGA

Directory of Open Access Journals (Sweden)

Jiye HUANG

2014-05-01

Full Text Available This paper presents an improved minimum error interpolation algorithm for general curves generation in computer numerical control (CNC. Compared with the conventional interpolation algorithms such as the By-Point Comparison method, the Minimum- Error method and the Digital Differential Analyzer (DDA method, the proposed improved Minimum-Error interpolation algorithm can find a balance between accuracy and efficiency. The new algorithm is applicable for the curves of linear, circular, elliptical and parabolic. The proposed algorithm is realized on a field programmable gate array (FPGA with Verilog HDL language, and simulated by the ModelSim software, and finally verified on a two-axis CNC lathe. The algorithm has the following advantages: firstly, the maximum interpolation error is only half of the minimum step-size; and secondly the computing time is only two clock cycles of the FPGA. Simulations and actual tests have proved that the high accuracy and efficiency of the algorithm, which shows that it is highly suited for real-time applications.

An FPGA based control unit for synchronization of laser Thomson scattering measurements to plasma events on MAST

International Nuclear Information System (INIS)

Naylor, G.A.

2010-01-01

The power and flexibility of modern Field Programmable Gate Arrays (FPGAs) is now being recognised in many areas of instrumentation and control . The high performance of modern ADCs and the high throughput of FPGAs allow the emulation of many specialised analogue instruments. The functions of heterodyne detection, phase measurements, spectrum analyzers, phase sensitive detectors, counters, etc. can be achieved in relatively simple hardware using an FPGA. The complex filtering functions can be efficiently performed digitally in the FPGA, without recourse to a separate DSP chip. This paper describes the use of a custom off the shelf FPGA board with a collection of custom interface boards to produce a powerful custom trigger system. This has been developed for agile triggering of YAG lasers on MAST. This unit allows various analogue inputs including magnetics data to be processed in real-time and allow Thomson scattering data to be collected at accurate times with respect to randomly occurring MHD phenomena such as neoclassical tearing modes (NTMs). The FPGA allows a 'System On a Chip' architecture in order to perform fast filtering in logic coupled to a dedicated soft processor for real-time fixed latency operations and a second soft processor to handle external communications with the control system for system configuration and reporting of status/archived data. The use of such a generic structure in order to provide a common approach, with reduced software development times, for diverse diagnostic situations will be discussed.

A high-level power model for MPSoC on FPGA

NARCIS (Netherlands)

Piscitelli, R.; Pimentel, A.D.

2012-01-01

This paper presents a framework for high-level power estimation of multiprocessor systems-on-chip (MPSoC) architectures on FPGA. The technique is based on abstract execution profiles, called event signatures. As a result, it is capable of achieving good evaluation performance, thereby making the

Labview applications based on field programmable gate array (FPGA) on temperature measurement system of heating-02

International Nuclear Information System (INIS)

Kussigit Santosa

2013-01-01

Temperature measurements system has been created at the heating-02 test using LabVIEW 2011 software. Making this measurement systems on FPGA is the development of previous a measurement system using the measurement with cDAQ9188. The advantage of this system is the independence of the system means that the execution time can run itself without a computer. The scope of the current study was limited on the development, programming and testing of data acquisition focused on programming of the FPGA modules that have been embedded on the cRIO 9074. In the making of temperature measurement systems is required the data acquisition system by National Texas Instruments cRIO 9074 module, power supply, Ni 9023 module, 7011 HIOKI current source, the software Labview 2011 and the computer. The using method is stringing the temperature measurement system, programming of data acquisition the FPGA as well as the acquisition system interface that is easy to do observations. From the experimental results, it can be concluded that the temperature measurement system can run well. So that the measurement system is expected to be used for the actual measurement. (author)

Central FPGA-based Destination and Load Control in the LHCb MHz Event Readout

CERN Document Server

Jacobsson, Richard

2012-01-01

The readout strategy of the LHCb experiment [1] is based on complete event readout at 1 MHz [2]. Over 300 sub-detector readout boards transmit event fragments at 1 MHz over a commercial 70 Gigabyte/s switching network to a distributed event building and trigger processing farm with 1470 individual multi-core computer nodes [3]. In the original specifications, the readout was based on a pure push protocol. This paper describes the proposal, implementation, and experience of a powerful non-conventional mixture of a push and a pull protocol, akin to credit-based flow control. A high-speed FPGA-based central master module controls the event fragment packing in the readout boards, the assignment of the farm node destination for each event, and controls the farm load based on an asynchronous pull mechanism from each farm node. This dynamic readout scheme relies on generic event requests and the concept of node credit allowing load balancing and trigger rate regulation as a function of the global farm load. It also ...

Fast semivariogram computation using FPGA architectures

Science.gov (United States)

Lagadapati, Yamuna; Shirvaikar, Mukul; Dong, Xuanliang

2015-02-01

The semivariogram is a statistical measure of the spatial distribution of data and is based on Markov Random Fields (MRFs). Semivariogram analysis is a computationally intensive algorithm that has typically seen applications in the geosciences and remote sensing areas. Recently, applications in the area of medical imaging have been investigated, resulting in the need for efficient real time implementation of the algorithm. The semivariogram is a plot of semivariances for different lag distances between pixels. A semi-variance, γ(h), is defined as the half of the expected squared differences of pixel values between any two data locations with a lag distance of h. Due to the need to examine each pair of pixels in the image or sub-image being processed, the base algorithm complexity for an image window with n pixels is O(n2). Field Programmable Gate Arrays (FPGAs) are an attractive solution for such demanding applications due to their parallel processing capability. FPGAs also tend to operate at relatively modest clock rates measured in a few hundreds of megahertz, but they can perform tens of thousands of calculations per clock cycle while operating in the low range of power. This paper presents a technique for the fast computation of the semivariogram using two custom FPGA architectures. The design consists of several modules dedicated to the constituent computational tasks. A modular architecture approach is chosen to allow for replication of processing units. This allows for high throughput due to concurrent processing of pixel pairs. The current implementation is focused on isotropic semivariogram computations only. Anisotropic semivariogram implementation is anticipated to be an extension of the current architecture, ostensibly based on refinements to the current modules. The algorithm is benchmarked using VHDL on a Xilinx XUPV5-LX110T development Kit, which utilizes the Virtex5 FPGA. Medical image data from MRI scans are utilized for the experiments

Development of FPGA-Based Control Board

Energy Technology Data Exchange (ETDEWEB)

Lee, Yoon Hee; Jeong, See Chae; Choi, Woong Seock; Lee, Chang Jae; Jeong, Jin Kwon; Ha, Jae Hong [Korea Power Engineering Company Inc., Daejeon (Korea, Republic of)

2009-10-15

It is well known that existing nuclear power plant (NPP) control systems contain many components which are becoming obsolete at an increasing rate. Various studies have been conducted to address control system hardware obsolescence. Obsolete analog and digital control systems in non-nuclear power plants are commonly replaced with modern digital control systems, programmable logic controllers (PLC) and distributed control systems (DCS). Field Programmable Gate Arrays (FPGAs) are highlighted as an alternative means for obsolete control systems. FPGAs are advanced digital integrated circuits (ICs) that contain configurable (programmable) blocks of logic along with configurable interconnects between these blocks. Designers can configure (program) such devices to perform a tremendous variety of tasks. FPGAs have been evolved from the technology of Programmable Logic Device (PLD). Nowadays they can contain millions of logic gates by nanotechnology and so be used to implement extremely large and complex functions that previously could be realized only using Application-Specific Integrated Circuits (ASICs). This paper is to present the development of a FPGAbased control board performing user-defined control functions. An Actel ProASIC{sup plus} FPGA platform is implemented as the comparator of Plant Protection System (PPS). Functional simulation is implemented for the comparator.

Use of FPGA to face electronic component obsolescence in software based safety I and C in NPPS

International Nuclear Information System (INIS)

Hadj, Abdellah; Bach, Julien; Esmenjaud, Claude; Daumas, Frederic; Salauen, Patrick

2010-01-01

In order to extend the life time of their Nuclear Power Plants (NPPs), most utilities are looking for ways to implement the renovation of their existing Instrumentation and Control (I and C) systems. When the I and C to modernize is software based, three paths can be considered: - to keep the legacy microprocessor and limit refurbishment to the associated hardware (i.e. the I/O boards, memories and the CPU board itself), - to move to another I and C platform based on another microprocessor, - to move to a non microprocessor based I and C platform. Software based I and C provide strong advantages such as flexibility and ability to implement advanced functions, however the complexity and the decreasing life time of nowadays microprocessors, mainly developed for the needs of the personal computer market, makes difficult their use and licensing for safety digital I and C systems. Solutions based on re-engineering of legacy microprocessors, or use of microprocessors dedicated to critical application need to be considered. In order to share a prospective vision of the future of I and C systems in NPPs, Electricite de France (EDF) Research and Development division and Rolls-Royce have launched a three year cooperation program on the use of the ASIC/FPGA technology in safety I and C systems. The first step of this program addresses the ability of the ASIC/FPGA technology to provide replacement solutions for former microprocessors taking as example the replacement of the Motorola MC6800 microprocessor. This paper presents the development of an IP cloning the Motorola MC6800 microprocessor, suitable for use in the refurbishment of safety I and C equipment based on this microprocessor. (authors)

Implementation of data acquisition interface using on-board field-programmable gate array (FPGA) universal serial bus (USB) link

International Nuclear Information System (INIS)

Nolida Yussup; Maslina Mohd Ibrahim; Lojius Lombigit; Nur Aira Abdul Rahman; Muhammad Rawi Mohamed Zin

2013-01-01

Full-text: Typically a system consists of hardware as the controller and software which is installed in the personal computer (PC). In the effective nuclear detection, the hardware involves the detection setup and the electronics used, with the software consisting of analysis tools and graphical display on PC. A data acquisition interface is necessary to enable the communication between the controller hardware and PC. Nowadays, Universal Serial Bus (USB) has become a standard connection method for computer peripherals and has replaced many varieties of serial and parallel ports. However the implementation of USB is complex. This paper describes the implementation of data acquisition interface between a field-programmable gate array (FPGA) board and a PC by exploiting the USB link of the FPGA board. The USB link is based on an FTDI chip which allows direct access of input and output to the Joint Test Action Group (JTAG) signals from a USB host and a complex programmable logic device (CPLD) with a 24 MHz clock input to the USB link. The implementation and results of using the USB link of FPGA board as the data interfacing are discussed. (author)

Implementation of data acquisition interface using on-board field-programmable gate array (FPGA) universal serial bus (USB) link

International Nuclear Information System (INIS)

Yussup, N.; Ibrahim, M. M.; Lombigit, L.; Rahman, N. A. A.; Zin, M. R. M.

2014-01-01

Typically a system consists of hardware as the controller and software which is installed in the personal computer (PC). In the effective nuclear detection, the hardware involves the detection setup and the electronics used, with the software consisting of analysis tools and graphical display on PC. A data acquisition interface is necessary to enable the communication between the controller hardware and PC. Nowadays, Universal Serial Bus (USB) has become a standard connection method for computer peripherals and has replaced many varieties of serial and parallel ports. However the implementation of USB is complex. This paper describes the implementation of data acquisition interface between a field-programmable gate array (FPGA) board and a PC by exploiting the USB link of the FPGA board. The USB link is based on an FTDI chip which allows direct access of input and output to the Joint Test Action Group (JTAG) signals from a USB host and a complex programmable logic device (CPLD) with a 24 MHz clock input to the USB link. The implementation and results of using the USB link of FPGA board as the data interfacing are discussed

Spacewire Routers Implemented with FPGA Technology

Science.gov (United States)

Habinc, Sandi; Isomaki, Marko

2011-08-01

Routers are an integral part of SpaceWire networks. Aeroflex Gaisler has developed a highly configurable SpaceWire router VHDL IP core to meet the needs for technology independent router designs. The main design goals have been configurability, technology independence, support of the standard and expandability. The IP core being technologically independent allows it to be used in both ASIC and FPGA technology. The latter is now being used to produce versatile standard products that can reach the market faster than for example an ASIC based product.

FPGA based, DSP board for LLRF 8-Channel SIMCON 3.0 Part I: Hardware

Science.gov (United States)

Giergusiewicz, Wojciech; Koprek, Waldemar; Jalmuzna, Wojciech; Pozniak, Krzysztof T.; Romaniuk, Ryszard S.

2005-09-01

The paper describes design, construction and initial measurements of an eight channel electronic LLRF device predicted for building of the control system for the VUV-FEL accelerator at DESY (Hamburg). The device, referred in the paper to as the SIMCON 3.0 (from the SC cavity simulator and controller) consists of a 16 layers, VME size, PCB, a large FPGA chip (VirtexII-4000 by Xilinx), eight fast ADCs and four DACs (by Analog Devices). To our knowledge, the proposed device is the first of this kind for the accelerator technology in which there was achieved (the FPGA based) DSP latency below 200 ns. With the optimized data transmission system, the overall LLRF system latency can be as low as 500 ns. The SIMCON 3.0 sub-system was applied for initial tests with the ACC1 module of the VUV FEL accelerator (eight channels) and with the CHECHIA test stand (single channel), both at the DESY. The promising results with the SIMCON 3.0 encouraged us to enter the design of SIMCON 3.1 possessing 10 measurement and control channels and some additional features to be reported in the next technical note. SIMCON 3.0 is a modular solution, while SIMCON 3.1 will be an integrated board of the all-in-one type. Two design approaches - modular and all-in-one, after branching off in this version of the SIMCON, will be continued.

A high-level power model for MPSoC on FPGA

NARCIS (Netherlands)

Piscitelli, R.; Pimentel, A.D.

2011-01-01

This paper presents a framework for high-level power estimation of multiprocessor systems-on-chip (MPSoC) architectures on FPGA. The technique is based on abstract execution profiles, called event signatures, and it operates at a higher level of abstraction than, e.g., commonly-used instruction-set

FPGA based computation of average neutron flux and e-folding period for start-up range of reactors

International Nuclear Information System (INIS)

Ram, Rajit; Borkar, S.P.; Dixit, M.Y.; Das, Debashis

2013-01-01

Pulse processing instrumentation channels used for reactor applications, play a vital role to ensure nuclear safety in startup range of reactor operation and also during fuel loading and first approach to criticality. These channels are intended for continuous run time computation of equivalent reactor core neutron flux and e-folding period. This paper focuses only the computational part of these instrumentation channels which is implemented in single FPGA using 32-bit floating point arithmetic engine. The computations of average count rate, log of average count rate, log rate and reactor period are done in VHDL using digital circuit realization approach. The computation of average count rate is done using fully adaptive window size moving average method, while Taylor series expansion for logarithms is implemented in FPGA to compute log of count rate, log rate and reactor e-folding period. This paper describes the block diagrams of digital logic realization in FPGA and advantage of fully adaptive window size moving average technique over conventional fixed size moving average technique for pulse processing of reactor instrumentations. (author)

FPGA Mezzanine Cards for CERN’s Accelerator Control System

CERN Document Server

Alvarez, P R; Lewis, J; Serrano, J; Wlostowski, T

2009-01-01

Field Programmable Gate Arrays (FPGAs) have become a key player in modern real time control systems. They offer determinism, simple design, high performance and versatility. A typical hardware architecture consists of an FPGA interfaced with a control bus and a variable number of digital IOs, ADCs and DACs depending on the application. Until recently the low-cost hardware paradigm has been using mezzanines containing a front end interface plus custom logic (typically an FPGA) and a local bus that interfaces the mezzanine to a carrier. As FPGAs grow in size and shrink in price, hardware reuse, testability and bus access speed could be improved if the user logic is moved to the carrier. The new FPGA Mezzanine Card (FMC) Vita 57 standard is a good example of this new paradigm. In this paper we present a standard kit of FPGA carriers and IO mezzanines for accelerator control. Carriers form factors will be VME, PCI and PCIe. The carriers will feature White Rabbit support for accurate synchronization of distributed...

Fast FPGA Implementation of an Original Impedance Analyser

Directory of Open Access Journals (Sweden)

Abdulrahman HAMED

2011-02-01

Full Text Available This article describes in detail the design and rapid prototyping of an embedded impedance analyzer. The measurement principle is based on the feedback control of the excitation voltage VD during a fast frequency sweeping. This function is carried out by a high precision synthesizer whose output resistance RG is digitally adjustable. Real and imaginary parts of the dipole impedance are determined from RG and the phase of VD. The digital architecture design uses the hardware-in-the-loop simulation in which the dipole is modeled using an RLC parallel circuit and a Butterworth Van Dyke structure. All digital functions are implemented on a Stratix II FPGA board with a 100 MHz frequency clock. The parameters taken into account are the frequency range (0 to 5 MHz, speed and resolution of the analysis and the quality factor of the resonant dipole. To reduce the analysis duration, the frequency sweeping rate is adjusted in real time.

FPGA based image processing for optical surface inspection with real time constraints

Science.gov (United States)

Hasani, Ylber; Bodenstorfer, Ernst; Brodersen, Jörg; Mayer, Konrad J.

2015-02-01

Today, high-quality printing products like banknotes, stamps, or vouchers, are automatically checked by optical surface inspection systems. In a typical optical surface inspection system, several digital cameras acquire the printing products with fine resolution from different viewing angles and at multiple wavelengths of the visible and also near infrared spectrum of light. The cameras deliver data streams with a huge amount of image data that have to be processed by an image processing system in real time. Due to the printing industry's demand for higher throughput together with the necessity to check finer details of the print and its security features, the data rates to be processed tend to explode. In this contribution, a solution is proposed, where the image processing load is distributed between FPGAs and digital signal processors (DSPs) in such a way that the strengths of both technologies can be exploited. The focus lies upon the implementation of image processing algorithms in an FPGA and its advantages. In the presented application, FPGAbased image-preprocessing enables real-time implementation of an optical color surface inspection system with a spatial resolution of 100 μm and for object speeds over 10 m/s. For the implementation of image processing algorithms in the FPGA, pipeline parallelism with clock frequencies up to 150 MHz together with spatial parallelism based on multiple instantiations of modules for parallel processing of multiple data streams are exploited for the processing of image data of two cameras and three color channels. Due to their flexibility and their fast response times, it is shown that FPGAs are ideally suited for realizing a configurable all-digital PLL for the processing of camera line-trigger signals with frequencies about 100 kHz, using pure synchronous digital circuit design.

Design and Implementation of Radar Cross-Section Models on a Virtex-6 FPGA

Directory of Open Access Journals (Sweden)

B. U. V. Prashanth

2014-01-01

Full Text Available The simulation of radar cross-section (RCS models in FPGA is illustrated. The models adopted are the Swerling ones. Radar cross-section (RCS which is also termed as echo area gives the amount of scattered power from a target towards the radar. This paper elucidates the simulation of RCS to represent the specified targets under different conditions, namely, aspect angle and frequency. This model is used for the performance evaluation of radar. RCS models have been developed for various targets like simple objects to complex objects like aircrafts, missiles, tanks, and so forth. First, the model was developed in MATLAB real time simulation environment and after successful verification, the same was implemented in FPGA. Xilinx ISE software was used for VHDL coding. This simulation model was used for the testing of a radar system. The results were compared with MATLAB simulations and FPGA based timing diagrams and RTL synthesis. The paper illustrates the simulation of various target radar cross-section (RCS models. These models are simulated in MATLAB and in FPGA, with the aim of implementing them efficiently on a radar system. This method can be generalized to apply to objects of arbitrary geometry for the two configurations of transmitter and receiver in the same as well as different locations.

Hardware and Software Design of FPGA-based PCIe Gen3 interface for APEnet+ network interconnect system

International Nuclear Information System (INIS)

Ammendola, R.; Biagioni, A.; Frezza, O.; Cicero, F. Lo; Lonardo, A; Martinelli, M.; Paolucci, P. S.; Pastorelli, E.; Simula, F.; Tosoratto, L.; Vicini, P.; Rossetti, D.

2015-01-01

In the attempt to develop an interconnection architecture optimized for hybrid HPC systems dedicated to scientific computing, we designed APEnet+, a point-to-point, low-latency and high-performance network controller supporting 6 fully bidirectional off-board links over a 3D torus topology.The first release of APEnet+ (named V4) was a board based on a 40 nm Altera FPGA, integrating 6 channels at 34 Gbps of raw bandwidth per direction and a PCIe Gen2 x8 host interface. It has been the first-of-its-kind device to implement an RDMA protocol to directly read/write data from/to Fermi and Kepler NVIDIA GPUs using NVIDIA peer-to-peer and GPUDirect RDMA protocols, obtaining real zero-copy GPU-to-GPU transfers over the network.The latest generation of APEnet+ systems (now named V5) implements a PCIe Gen3 x8 host interface on a 28 nm Altera Stratix V FPGA, with multi-standard fast transceivers (up to 14.4 Gbps) and an increased amount of configurable internal resources and hardware IP cores to support main interconnection standard protocols.Herein we present the APEnet+ V5 architecture, the status of its hardware and its system software design. Both its Linux Device Driver and the low-level libraries have been redeveloped to support the PCIe Gen3 protocol, introducing optimizations and solutions based on hardware/software co-design. (paper)

FPGA-based I and C Systems: A Technological Trick or a way to improve NPPs Safety and Security?

Energy Technology Data Exchange (ETDEWEB)

Sklyar, Vladimir; Andrashov, Anton; Kharchenko, Vyacheslav; Sklyar, Vladimir; Bakhmach, Ievgenii [RPC RADIY, Kirovograd (Ukraine)

2012-03-15

The objective of this paper is to discuss advantages and values which Field Programmable Gates Array (FPGA) based solutions can add to Instrumentation and Control (I and C) design of Nuclear Power Plants (NPPs). Application of FPGAs as programmable components instead of Programmable Logic Controllers (PLC) is an advanced solution which provides decreasing of software impact on potential common cause failures (CCF). There are the following such advantages: Implementation of safety functions without the use of any operation software and operating system, Flexibility of the I and C platform which can be configured for any type of functions and reactor designs, Reduction in the time necessary for software verification in the design phase, Easy modification of control logic without any need for hardware modification, Possibility of implementing all safety requirements in safety and safety-related I and C systems, Tolerance to internal failures and external environmental impacts, Resilience to obsolescence due to the portability of the Hardware Description Language (HDL) code between various FPGA-chips produced by different manufacturers, Reduction in Corby vulnerability.

Dynamic Reconfiguration Of FPGA Nodes In A Distributed Computing System: A Preliminary Investigation

National Research Council Canada - National Science Library

Nixon, Patrick

2002-01-01

This report results from a contract tasking Trinity College, Dublin to investigate a specialized portion of a heterogeneous information system, specifically, Field Programmable Gate Array (FPGA)-based nodes...

Real Time Implementation of a DC Motor Speed Control by Fuzzy Logic Controller and PI Controller Using FPGA

Directory of Open Access Journals (Sweden)

G. Sakthivel

2010-10-01

Full Text Available Fuzzy logic control has met with growing interest in many motor control applications due to its non-linearity, handling features and independence of plant modelling. The hardware implementation of fuzzy logic controller (FLC on FPGA is very important because of the increasing number of fuzzy applications requiring highly parallel and high speed fuzzy processing. Implementation of a fuzzy logic controller and conventional PI controller on an FPGA using VHDL for DC motor speed control is presented in this paper. The proposed scheme is to improve tracking performance of D.C. motor as compared to the conventional (PI control strategy .This paper describes the hardware implementation of two inputs (error and change in error, one output fuzzy logic controller based on PI controller and conventional PI controller using VHDL. Real time implementation FLC and conventional PI controller is made on Spartan-3A DSP FPGA (XC3SD1800A FPGA for the speed control of DC motor. It is observed that fuzzy logic based controllers give better responses than the conventional PI controller for the speed control of dc motor.

CFD thermal-hydraulic analysis of a CANDU fuel channel with SEU43 type fuel bundle

International Nuclear Information System (INIS)

Catana, A.; Prisecaru, Ilie; Dupleac, D.; Danila, Nicolae

2009-01-01

This paper presents the numerical investigation of a CANDU fuel channel using CFD (Computational Fluid Dynamics) methodology approach, when SEU43 fuel bundles are used. Comparisons with STD37 fuel bundles are done in order to evaluate the influence of geometrical differences of the fuel bundle types on fluid flow properties. We adopted a strategy to analyze only the significant segments of fuel channel, namely : - the fuel bundle junctions with adjacent segments; - the fuel bundle spacer planes with adjacent segments; - the fuel bundle segments with turbulence enhancement buttons; - and the regular segments of fuel bundles. The computer code used is an academic version of FLUENT code, available from UPB. The complex flow domain of fuel bundles contained in pressure tube and operating conditions determine a high turbulence flow and in some parts of fuel channel also a multi-phase flow. Numerical simulation of the flow in the fuel channel has been achieved by solving the equations for conservation of mass, momentum and energy. For turbulence model the standard k-model is employed although other turbulence models can be used. In this paper we do not consider heat generation and heat transfer capabilities of CFD methods. Boundary conditions for CFD analysis are provided by system and sub-channel analysis. In this paper the discussion is focused on some flow parameters behaviour at the bundle junction, spacer's plane configuration, etc. of a SEU43 fuel bundle in conditions of a typical CANDU 6 fuel channel starting from some experience gained in a previous work. (authors)

Design of an FPGA-based embedded system for the ATLAS Tile Calorimeter front-end electronics test-bench

CERN Document Server

Carrio, F; The ATLAS collaboration; Moreno, P; Reed, R; Sandrock, C; Shalyugin, A; Schettino, V; Solans, C; Souza, J; Usai, G; Valero, A

2013-01-01

The portable test bench (VME based) used for the certification of the Tile calorimeter front-end electronics has been redesigned for the LHC Long Shutdown (2013-2014) improving its portability. The new version is based on a Xilinx Virtex 5 FPGA that implements an embedded system using a hard core PowerPC 440 microprocessor and custom IP cores. The PowerPC microprocessor runs a light Linux version and handles the IP cores written in VHDL that implement the different functionalities (TTC, G-Link, CAN-Bus) Description of the system and performance measurements of the different components will be shown.

Design and Implementation of a FPGA and DSP Based MIMO Radar Imaging System

Directory of Open Access Journals (Sweden)

Wei Wang

2015-06-01

Full Text Available The work presented in this paper is aimed at the implementation of a real-time multiple-input multiple-output (MIMO imaging radar used for area surveillance. In this radar, the equivalent virtual array method and time-division technique are applied to make 16 virtual elements synthesized from the MIMO antenna array. The chirp signal generater is based on a combination of direct digital synthesizer (DDS and phase locked loop (PLL. A signal conditioning circuit is used to deal with the coupling effect within the array. The signal processing platform is based on an efficient field programmable gates array (FPGA and digital signal processor (DSP pipeline where a robust beamforming imaging algorithm is running on. The radar system was evaluated through a real field experiment. Imaging capability and real-time performance shown in the results demonstrate the practical feasibility of the implementation.

Field programmable gate array reliability analysis using the dynamic flow graph methodology

Energy Technology Data Exchange (ETDEWEB)

McNelles, Phillip; Lu, Lixuan [Faculty of Energy Systems and Nuclear Science, University of Ontario Institute of Technology (UOIT), Ontario (Canada)

2016-10-15

Field programmable gate array (FPGA)-based systems are thought to be a practical option to replace certain obsolete instrumentation and control systems in nuclear power plants. An FPGA is a type of integrated circuit, which is programmed after being manufactured. FPGAs have some advantages over other electronic technologies, such as analog circuits, microprocessors, and Programmable Logic Controllers (PLCs), for nuclear instrumentation and control, and safety system applications. However, safety-related issues for FPGA-based systems remain to be verified. Owing to this, modeling FPGA-based systems for safety assessment has now become an important point of research. One potential methodology is the dynamic flowgraph methodology (DFM). It has been used for modeling software/hardware interactions in modern control systems. In this paper, FPGA logic was analyzed using DFM. Four aspects of FPGAs are investigated: the 'IEEE 1164 standard', registers (D flip-flops), configurable logic blocks, and an FPGA-based signal compensator. The ModelSim simulations confirmed that DFM was able to accurately model those four FPGA properties, proving that DFM has the potential to be used in the modeling of FPGA-based systems. Furthermore, advantages of DFM over traditional reliability analysis methods and FPGA simulators are presented, along with a discussion of potential issues with using DFM for FPGA-based system modeling.

An FPGA Based Multiprocessing CPU for Beam Synchronous Timing in CERN's SPS and LHC

CERN Document Server

Ballester, F J; Gras, J J; Lewis, J; Savioz, J J; Serrano, J

2003-01-01

The Beam Synchronous Timing system (BST) will be used around the LHC and its injector, the SPS, to broadcast timing meassages and synchronize actions with the beam in different receivers. To achieve beam synchronization, the BST Master card encodes messages using the bunch clock, with a nominal value of 40.079 MHz for the LHC. These messages are produced by a set of tasks every revolution period, which is every 89 us for the LHC and every 23 us for the SPS, therefore imposing a hard real-time constraint on the system. To achieve determinism, the BST Master uses a dedicated CPU inside its main Field Programmable Gate Array (FPGA) featuring zero-delay hardware task switching and a reduced instruction set. This paper describes the BST Master card, stressing the main FPGA design, as well as the associated software, including the LynxOS driver and the tailor-made assembler.

Pulsed laser-induced SEU in integrated circuits

International Nuclear Information System (INIS)

Buchner, S.; Kang, K.; Stapor, W.J.; Campbell, A.B.; Knudson, A.R.; McDonald, P.; Rivet, S.

1990-01-01

The authors have used a pulsed picosecond laser to measure the threshold for single event upset (SEU) and single event latchup (SEL) for two different kinds of integrated circuits. The relative thresholds show good agreement with published ion upset data. The consistency of the results together with the advantages of using a laser system suggest that the pulsed laser can be used for SEU/SEL hardness assurance of integrated circuits

Design of an FPGA-based Radiation Tolerant Agent for Worldfip Fieldbus

CERN Document Server

Penacoba, G; Gousiou, E; Page, S; Palluel, J; Serrano, J; van der Bij, E

2011-01-01

CERN makes extensive use of the WorldFIP fieldbus interface in the LHC and other accelerators in the preinjectors chain. Following the decision of the provider of the components to stop the developments in this field and foreseeing the potential problems in the subsequent support, CERN decided to purchase the design information of these components and in-source the future developments using this technology. The first in-house design concerns a replacement for the MicroFIP chip whose last version was manufactured in an IC feature size found to be more vulnerable to radiation of high energy particles than the previous versions. NanoFIP is a CERN design based on a Flash FPGA implementing a subset of the functionality allowed by the communication standard, fitting the requirements of the different users and including the robustness against radiation as a design constraint. The development presented involved several groups at CERN working together in the framework of the Open Hardware Repository collaboration, and...

Design of Energy Storage Management System Based on FPGA in Micro-Grid

Science.gov (United States)

Liang, Yafeng; Wang, Yanping; Han, Dexiao

2018-01-01

Energy storage system is the core to maintain the stable operation of smart micro-grid. Aiming at the existing problems of the energy storage management system in the micro-grid such as Low fault tolerance, easy to cause fluctuations in micro-grid, a new intelligent battery management system based on field programmable gate array is proposed : taking advantage of FPGA to combine the battery management system with the intelligent micro-grid control strategy. Finally, aiming at the problem that during estimation of battery charge State by neural network, initialization of weights and thresholds are not accurate leading to large errors in prediction results, the genetic algorithm is proposed to optimize the neural network method, and the experimental simulation is carried out. The experimental results show that the algorithm has high precision and provides guarantee for the stable operation of micro-grid.

Bridging FPGA and GPU technologies for AO real-time control

Science.gov (United States)

Perret, Denis; Lainé, Maxime; Bernard, Julien; Gratadour, Damien; Sevin, Arnaud

2016-07-01

Our team has developed a common environment for high performance simulations and real-time control of AO systems based on the use of Graphics Processors Units in the context of the COMPASS project. Such a solution, based on the ability of the real time core in the simulation to provide adequate computing performance, limits the cost of developing AO RTC systems and makes them more scalable. A code developed and validated in the context of the simulation may be injected directly into the system and tested on sky. Furthermore, the use of relatively low cost components also offers significant advantages for the system hardware platform. However, the use of GPUs in an AO loop comes with drawbacks: the traditional way of offloading computation from CPU to GPUs - involving multiple copies and unacceptable overhead in kernel launching - is not well suited in a real time context. This last application requires the implementation of a solution enabling direct memory access (DMA) to the GPU memory from a third party device, bypassing the operating system. This allows this device to communicate directly with the real-time core of the simulation feeding it with the WFS camera pixel stream. We show that DMA between a custom FPGA-based frame-grabber and a computation unit (GPU, FPGA, or Coprocessor such as Xeon-phi) across PCIe allows us to get latencies compatible with what will be needed on ELTs. As a fine-grained synchronization mechanism is not yet made available by GPU vendors, we propose the use of memory polling to avoid interrupts handling and involvement of a CPU. Network and Vision protocols are handled by the FPGA-based Network Interface Card (NIC). We present the results we obtained on a complete AO loop using camera and deformable mirror simulators.

Development of Single-Event Upset hardened programmable logic devices in deep submicron CMOS; Developpement de circuits logiques programmables resistants aux aleas logiques en technologie CMOS submicrometrique

Energy Technology Data Exchange (ETDEWEB)

Bonacini, S

2007-11-15

The electronics associated to the particle detectors of the Large Hadron Collider (LHC), under construction at CERN, will operate in a very harsh radiation environment. Commercial Off-The-Shelf (COTS) components cannot be used in the vicinity of particle collision due to their poor radiation tolerance. This thesis is a contribution to the effort to cover the need for radiation-tolerant SEU-robust (Single Event Upset) programmable components for application in high energy physics experiments. Two components are under development: a Programmable Logic Device (PLD) and a Field-Programmable Gate Array (FPGA). The PLD is a fuse-based, 10-input, 8-I/O general architecture device in 0.25 {mu}m CMOS technology. The FPGA under development is a 32*32 logic block array, equivalent to {approx} 25 k gates, in 0.13 {mu}m CMOS. The irradiation test results obtained in the CMOS 0.25 {mu}m technology demonstrate good robustness of the circuit up to an LET (Linear Energy Transfer) of 79.6 cm{sup 2}*MeV/mg, which make it suitable for the target environment. The CMOS 0.13 {mu}m circuit has showed robustness to an LET of 37.4 cm{sup 2}*MeV/mg in the static test mode and has increased sensitivity in the dynamic test mode. This work focused also on the research for an SEU-robust register in both the mentioned technologies. The SEU-robust register is employed as a user data flip-flop in the FPGA and PLD designs and as a configuration cell as well in the FPGA design.

Development of Single-Event Upset hardened programmable logic devices in deep submicron CMOS

International Nuclear Information System (INIS)

Bonacini, S.

2007-11-01

The electronics associated to the particle detectors of the Large Hadron Collider (LHC), under construction at CERN, will operate in a very harsh radiation environment. Commercial Off-The-Shelf (COTS) components cannot be used in the vicinity of particle collision due to their poor radiation tolerance. This thesis is a contribution to the effort to cover the need for radiation-tolerant SEU-robust (Single Event Upset) programmable components for application in high energy physics experiments. Two components are under development: a Programmable Logic Device (PLD) and a Field-Programmable Gate Array (FPGA). The PLD is a fuse-based, 10-input, 8-I/O general architecture device in 0.25 μm CMOS technology. The FPGA under development is a 32*32 logic block array, equivalent to ∼ 25 k gates, in 0.13 μm CMOS. The irradiation test results obtained in the CMOS 0.25 μm technology demonstrate good robustness of the circuit up to an LET (Linear Energy Transfer) of 79.6 cm 2 *MeV/mg, which make it suitable for the target environment. The CMOS 0.13 μm circuit has showed robustness to an LET of 37.4 cm 2 *MeV/mg in the static test mode and has increased sensitivity in the dynamic test mode. This work focused also on the research for an SEU-robust register in both the mentioned technologies. The SEU-robust register is employed as a user data flip-flop in the FPGA and PLD designs and as a configuration cell as well in the FPGA design

Embedded FPGA Design for Optimal Pixel Adjustment Process of Image Steganography

Directory of Open Access Journals (Sweden)

Chiung-Wei Huang

2018-01-01

Full Text Available We propose a prototype of field programmable gate array (FPGA implementation for optimal pixel adjustment process (OPAP algorithm of image steganography. In the proposed scheme, the cover image and the secret message are transmitted from a personal computer (PC to an FPGA board using RS232 interface for hardware processing. We firstly embed k-bit secret message into each pixel of the cover image by the last-significant-bit (LSB substitution method, followed by executing associated OPAP calculations to construct a stego pixel. After all pixels of the cover image have been embedded, a stego image is created and transmitted from FPGA back to the PC and stored in the PC. Moreover, we have extended the basic pixel-wise structure to a parallel structure which can fully use the hardware devices to speed up the embedding process and embed several bits of secret message at the same time. Through parallel mechanism of the hardware based design, the data hiding process can be completed in few clock cycles to produce steganography outcome. Experimental results show the effectiveness and correctness of the proposed scheme.

FPGA cluster for high-performance AO real-time control system

Science.gov (United States)

Geng, Deli; Goodsell, Stephen J.; Basden, Alastair G.; Dipper, Nigel A.; Myers, Richard M.; Saunter, Chris D.

2006-06-01

Whilst the high throughput and low latency requirements for the next generation AO real-time control systems have posed a significant challenge to von Neumann architecture processor systems, the Field Programmable Gate Array (FPGA) has emerged as a long term solution with high performance on throughput and excellent predictability on latency. Moreover, FPGA devices have highly capable programmable interfacing, which lead to more highly integrated system. Nevertheless, a single FPGA is still not enough: multiple FPGA devices need to be clustered to perform the required subaperture processing and the reconstruction computation. In an AO real-time control system, the memory bandwidth is often the bottleneck of the system, simply because a vast amount of supporting data, e.g. pixel calibration maps and the reconstruction matrix, need to be accessed within a short period. The cluster, as a general computing architecture, has excellent scalability in processing throughput, memory bandwidth, memory capacity, and communication bandwidth. Problems, such as task distribution, node communication, system verification, are discussed.

Real-time co-registered ultrasound and photoacoustic imaging system based on FPGA and DSP architecture

Science.gov (United States)

Alqasemi, Umar; Li, Hai; Aguirre, Andres; Zhu, Quing

2011-03-01

Co-registering ultrasound (US) and photoacoustic (PA) imaging is a logical extension to conventional ultrasound because both modalities provide complementary information of tumor morphology, tumor vasculature and hypoxia for cancer detection and characterization. In addition, both modalities are capable of providing real-time images for clinical applications. In this paper, a Field Programmable Gate Array (FPGA) and Digital Signal Processor (DSP) module-based real-time US/PA imaging system is presented. The system provides real-time US/PA data acquisition and image display for up to 5 fps* using the currently implemented DSP board. It can be upgraded to 15 fps, which is the maximum pulse repetition rate of the used laser, by implementing an advanced DSP module. Additionally, the photoacoustic RF data for each frame is saved for further off-line processing. The system frontend consists of eight 16-channel modules made of commercial and customized circuits. Each 16-channel module consists of two commercial 8-channel receiving circuitry boards and one FPGA board from Analog Devices. Each receiving board contains an IC† that combines. 8-channel low-noise amplifiers, variable-gain amplifiers, anti-aliasing filters, and ADC's‡ in a single chip with sampling frequency of 40MHz. The FPGA board captures the LVDSξ Double Data Rate (DDR) digital output of the receiving board and performs data conditioning and subbeamforming. A customized 16-channel transmission circuitry is connected to the two receiving boards for US pulseecho (PE) mode data acquisition. A DSP module uses External Memory Interface (EMIF) to interface with the eight 16-channel modules through a customized adaptor board. The DSP transfers either sub-beamformed data (US pulse-echo mode or PAI imaging mode) or raw data from FPGA boards to its DDR-2 memory through the EMIF link, then it performs additional processing, after that, it transfer the data to the PC** for further image processing. The PC code

An FPGA-based silicon neuronal network with selectable excitability silicon neurons

Directory of Open Access Journals (Sweden)

Jing eLi

2012-12-01

Full Text Available This paper presents a digital silicon neuronal network which simulates the nerve system in creatures and has the ability to execute intelligent tasks, such as associative memory. Two essential elements, the mathematical-structure-based digital spiking silicon neuron (DSSN and the transmitter release based silicon synapse, allow the network to show rich dynamic behaviors and are computationally efficient for hardware implementation. We adopt mixed pipeline and parallel structure and shift operations to design a sufficient large and complex network without excessive hardware resource cost. The network with $256$ full-connected neurons is built on a Digilent Atlys board equipped with a Xilinx Spartan-6 LX45 FPGA. Besides, a memory control block and USB control block are designed to accomplish the task of data communication between the network and the host PC. This paper also describes the mechanism of associative memory performed in the silicon neuronal network. The network is capable of retrieving stored patterns if the inputs contain enough information of them. The retrieving probability increases with the similarity between the input and the stored pattern increasing. Synchronization of neurons is observed when the successful stored pattern retrieval occurs.

Feasibility analysis of real-time physical modeling using WaveCore processor technology on FPGA

NARCIS (Netherlands)

Verstraelen, Martinus Johannes Wilhelmina; Pfeifle, Florian; Bader, Rolf

2015-01-01

WaveCore is a scalable many-core processor technology. This technology is specifically developed and optimized for real-time acoustical modeling applications. The programmable WaveCore soft-core processor is silicon-technology independent and hence can be targeted to ASIC or FPGA technologies. The

Modified SURF Algorithm Implementation on FPGA For Real-Time Object Tracking

Directory of Open Access Journals (Sweden)

Tomyslav Sledevič

2013-05-01

Full Text Available The paper describes the FPGA-based implementation of the modified speeded-up robust features (SURF algorithm. FPGA was selected for parallel process implementation using VHDL to ensure features extraction in real-time. A sliding 84×84 size window was used to store integral pixels and accelerate Hessian determinant calculation, orientation assignment and descriptor estimation. The local extreme searching was used to find point of interest in 8 scales. The simplified descriptor and orientation vector were calculated in parallel in 6 scales. The algorithm was investigated by tracking marker and drawing a plane or cube. All parts of algorithm worked on 25 MHz clock. The video stream was generated using 60 fps and 640×480 pixel camera.Article in Lithuanian

Development of 8K-MCA Add-on based on FPGA technique with a control of VB6 software application under windows environment

International Nuclear Information System (INIS)

Dang Lanh; Nguyen Nhi Dien; Nguyen Xuan Hai; Nguyen Bach Viet; Pham Ngoc Son; Huynh Minh; Vuong Huu Tan; Pham Dinh Khang; Phan Nam Anh

2003-01-01

The multichannel analyzer is the heart of most experimental measurements. Today, it becomes popular and convenient. It can play a role of getting, processing data and easily interfacing to PC. Some standard-alone multichannel analysis systems can be replaced by Add-on MCA card. Especially, MCA card is necessary for application in nuclear physics research. The main aim of this sub-project is to focus on a design and construction of an 8K-MCA Add-on served for studying nuclear structure, for development of Gamma spectroscopy system, and for a production of low-cost electronics instruments as well. Some experimental results were obtained through the aforementioned card combining with other needed functional analog units. A multichannel data processing (MCD) circuit for nuclear spectroscopy application was developed using a field programmable gate arrays (FPGA) as the central processing element. In addition to the first role, A 13-bit analog-to-digital converter (8k ADC) circuit for nuclear spectroscopy application was also developed using a successive approximation ADC with a control of FPGA technology. The FPGA operates a program that builds the distributed functions of data collected by the ADC and then corrects the ADC differential non-linearity (DNL) via the sliding scale method. The acquisition routine runs in 3.7μ s. the conversion time is approximated 2.2μ s, and the integral non-linearity ≤ 0.14%. (author)

The fast neutron SEU cross section of a 4 Mb SRAM memory

International Nuclear Information System (INIS)

Pereira Junior, Evaldo C.F.; Goncalez, Odair L.; Cruz, Marco Aurelio da; Prado, Adriane Cristina Mendes; Federico, Claudio Antonio; Gaspar, Felipe de Barros

2013-01-01

The results of a static test of single event upset (SEU) produced by fast neutrons on an ISSI 4Mb SRAM memory are reported in this work. To perform the tests, it was built a platform based on a motherboard which is controlled by microprocessor, whose function is to perform the writing, reading and control of the memories under irradiation. The irradiation was performed with a set of 8 241 Am-Be neutrons source in a quasi-isotropic incidence. The SEU cross was calculated from the accumulated bit flip count. (author)

Small Microprocessor for ASIC or FPGA Implementation

Science.gov (United States)

Kleyner, Igor; Katz, Richard; Blair-Smith, Hugh

2011-01-01

A small microprocessor, suitable for use in applications in which high reliability is required, was designed to be implemented in either an application-specific integrated circuit (ASIC) or a field-programmable gate array (FPGA). The design is based on commercial microprocessor architecture, making it possible to use available software development tools and thereby to implement the microprocessor at relatively low cost. The design features enhancements, including trapping during execution of illegal instructions. The internal structure of the design yields relatively high performance, with a significant decrease, relative to other microprocessors that perform the same functions, in the number of microcycles needed to execute macroinstructions. The problem meant to be solved in designing this microprocessor was to provide a modest level of computational capability in a general-purpose processor while adding as little as possible to the power demand, size, and weight of a system into which the microprocessor would be incorporated. As designed, this microprocessor consumes very little power and occupies only a small portion of a typical modern ASIC or FPGA. The microprocessor operates at a rate of about 4 million instructions per second with clock frequency of 20 MHz.

An SEU-hardened latch with a triple-interlocked structure

International Nuclear Information System (INIS)

Li Yuanqing; Yao Suying; Xu Jiangtao; Gao Jing

2012-01-01

A single event upset (SEU) tolerant latch with a triple-interlocked structure is presented. Its self-recovery mechanism is implemented by using three pairs of guard-gates and inverters to construct feedback lines inside the structure. This latch effectively suppresses the effects of charge deposition at any single internal node caused by particle strikes. Three recently reported SEU-hardened latches are chosen and compared with this latch in terms of reliability. The potential problems that these three latches could still get flipped due to single event effects or single event effects plus crosstalk coupling are pointed out, which can be mitigated by this proposed latch. The SEU tolerance of each latch design is evaluated through circuit-level SEU injection simulation. Furthermore, discussions on the crosstalk robustness and some other characteristics of these latches are also presented. (semiconductor integrated circuits)

Read-out concepts for FPGA-based sub-systems within the CBM detector

Energy Technology Data Exchange (ETDEWEB)

Michel, Jan [Goethe-Universitaet Frankfurt (Germany); Collaboration: CBM-Collaboration

2015-07-01

The Compressed Baryonic Matter experiment (CBM) to be built at FAIR consists of several individual sub-detectors. Some are based on custom ASICs as front-ends. Others employ FPGA based modules where extensive slow control features can be implemented to ease the recording of data and to allow for fast detection of any kind of error condition. Being designed as a free-running data acquisition, the demands also include a synchronized read-out, i.e. distribution of a common clock signal to all modules. To reduce the complexity of wiring, this is to be done sharing the same optical fibers as the data transport. During the past years, TrbNet has been designed and is used in various experiments, initially for the HADES experiment at FAIR. This protocol can now serve as a platform for the CBM read-out. In several steps, synchronous links with deterministic latency, as well as a free-streaming data transport can be included. At the same time, modifications to improve bandwidth and provide compatibility to the CERN GBTx links used for ASIC based sub-systems are to be developed. This contribution shows the planned steps as well as the current status of development.

An FPGA-based DS-CDMA multiuser demodulator employing adaptive multistage parallel interference cancellation

Science.gov (United States)

Li, Xinhua; Song, Zhenyu; Zhan, Yongjie; Wu, Qiongzhi

2009-12-01

Since the system capacity is severely limited, reducing the multiple access interfere (MAI) is necessary in the multiuser direct-sequence code division multiple access (DS-CDMA) system which is used in the telecommunication terminals data-transferred link system. In this paper, we adopt an adaptive multistage parallel interference cancellation structure in the demodulator based on the least mean square (LMS) algorithm to eliminate the MAI on the basis of overviewing various of multiuser dectection schemes. Neither a training sequence nor a pilot signal is needed in the proposed scheme, and its implementation complexity can be greatly reduced by a LMS approximate algorithm. The algorithm and its FPGA implementation is then derived. Simulation results of the proposed adaptive PIC can outperform some of the existing interference cancellation methods in AWGN channels. The hardware setup of mutiuser demodulator is described, and the experimental results based on it demonstrate that the simulation results shows large performance gains over the conventional single-user demodulator.

Autonomous Lawnmower using FPGA implementation.

Science.gov (United States)

Ahmad, Nabihah; Lokman, Nabill bin; Helmy Abd Wahab, Mohd

2016-11-01

Nowadays, there are various types of robot have been invented for multiple purposes. The robots have the special characteristic that surpass the human ability and could operate in extreme environment which human cannot endure. In this paper, an autonomous robot is built to imitate the characteristic of a human cutting grass. A Field Programmable Gate Array (FPGA) is used to control the movements where all data and information would be processed. Very High Speed Integrated Circuit (VHSIC) Hardware Description Language (VHDL) is used to describe the hardware using Quartus II software. This robot has the ability of avoiding obstacle using ultrasonic sensor. This robot used two DC motors for its movement. It could include moving forward, backward, and turning left and right. The movement or the path of the automatic lawn mower is based on a path planning technique. Four Global Positioning System (GPS) plot are set to create a boundary. This to ensure that the lawn mower operates within the area given by user. Every action of the lawn mower is controlled by the FPGA DE' Board Cyclone II with the help of the sensor. Furthermore, Sketch Up software was used to design the structure of the lawn mower. The autonomous lawn mower was able to operate efficiently and smoothly return to coordinated paths after passing the obstacle. It uses 25% of total pins available on the board and 31% of total Digital Signal Processing (DSP) blocks.

B-DCGAN:Evaluation of Binarized DCGAN for FPGA

OpenAIRE

Terada, Hideo; Shouno, Hayaru

2018-01-01

We are trying to implement deep neural networks in the edge computing environment for real-world applications such as the IoT(Internet of Things), the FinTech etc., for the purpose of utilizing the significant achievement of Deep Learning in recent years. Especially, we now focus algorithm implementation on FPGA, because FPGA is one of the promising devices for low-cost and low-power implementation of the edge computer. In this work, we introduce Binary-DCGAN(B-DCGAN) - Deep Convolutional GAN...

FPGA-based fused smart-sensor for tool-wear area quantitative estimation in CNC machine inserts.

Science.gov (United States)

Trejo-Hernandez, Miguel; Osornio-Rios, Roque Alfredo; de Jesus Romero-Troncoso, Rene; Rodriguez-Donate, Carlos; Dominguez-Gonzalez, Aurelio; Herrera-Ruiz, Gilberto

2010-01-01

Manufacturing processes are of great relevance nowadays, when there is a constant claim for better productivity with high quality at low cost. The contribution of this work is the development of a fused smart-sensor, based on FPGA to improve the online quantitative estimation of flank-wear area in CNC machine inserts from the information provided by two primary sensors: the monitoring current output of a servoamplifier, and a 3-axis accelerometer. Results from experimentation show that the fusion of both parameters makes it possible to obtain three times better accuracy when compared with the accuracy obtained from current and vibration signals, individually used.

STAR: FPGA-based software defined satellite transponder

Science.gov (United States)

Davalle, Daniele; Cassettari, Riccardo; Saponara, Sergio; Fanucci, Luca; Cucchi, Luca; Bigongiari, Franco; Errico, Walter

2013-05-01

This paper presents STAR, a flexible Telemetry, Tracking & Command (TT&C) transponder for Earth Observation (EO) small satellites, developed in collaboration with INTECS and SITAEL companies. With respect to state-of-the-art EO transponders, STAR includes the possibility of scientific data transfer thanks to the 40 Mbps downlink data-rate. This feature represents an important optimization in terms of hardware mass, which is important for EO small satellites. Furthermore, in-flight re-configurability of communication parameters via telecommand is important for in-orbit link optimization, which is especially useful for low orbit satellites where visibility can be as short as few hundreds of seconds. STAR exploits the principles of digital radio to minimize the analog section of the transceiver. 70MHz intermediate frequency (IF) is the interface with an external S/X band radio-frequency front-end. The system is composed of a dedicated configurable high-speed digital signal processing part, the Signal Processor (SP), described in technology-independent VHDL working with a clock frequency of 184.32MHz and a low speed control part, the Control Processor (CP), based on the 32-bit Gaisler LEON3 processor clocked at 32 MHz, with SpaceWire and CAN interfaces. The quantization parameters were fine-tailored to reach a trade-off between hardware complexity and implementation loss which is less than 0.5 dB at BER = 10-5 for the RX chain. The IF ports require 8-bit precision. The system prototype is fitted on the Xilinx Virtex 6 VLX75T-FF484 FPGA of which a space-qualified version has been announced. The total device occupation is 82 %.

FPGA Implementation of a Simple 3D Graphics Pipeline

Directory of Open Access Journals (Sweden)

Vladimir Kasik

2015-01-01

Full Text Available Conventional methods for computing 3D projects are nowadays usually implemented on standard or graphics processors. The performance of these devices is limited especially by the used architecture, which to some extent works in a sequential manner. In this article we describe a project which utilizes parallel computation for simple projection of a wireframe 3D model. The algorithm is optimized for a FPGA-based implementation. The design of the numerical logic is described in VHDL with the use of several basic IP cores used especially for computing trigonometric functions. The implemented algorithms allow smooth rotation of the model in two axes (azimuth and elevation and a change of the viewing angle. Tests carried out on a FPGA Xilinx Spartan-6 development board have resulted in real-time rendering at over 5000fps. In the conclusion of the article, we discuss additional possibilities for increasing the computational output in graphics applications via the use of HPC (High Performance Computing.

Simultaneous Perturbation Particle Swarm Optimization and Its FPGA Implementation

OpenAIRE

Maeda, Yutaka; Matsushita, Naoto

2009-01-01

In this paper, we presented hardware implementation of the particle swarm optimization algorithm which is combination of the ordinary particle swarm optimization and the simultaneous perturbation method. FPGA is used to realize the system. This algorithm utilizes local information of objective function effectively without lack of advantage of the original particle swarm optimization. Moreover, the FPGA implementation gives higher operation speed effectively using parallelism of the particle s...

Resource and Performance Evaluations of Fixed Point QRD-RLS Systolic Array through FPGA Implementation

Science.gov (United States)

Yokoyama, Yoshiaki; Kim, Minseok; Arai, Hiroyuki

At present, when using space-time processing techniques with multiple antennas for mobile radio communication, real-time weight adaptation is necessary. Due to the progress of integrated circuit technology, dedicated processor implementation with ASIC or FPGA can be employed to implement various wireless applications. This paper presents a resource and performance evaluation of the QRD-RLS systolic array processor based on fixed-point CORDIC algorithm with FPGA. In this paper, to save hardware resources, we propose the shared architecture of a complex CORDIC processor. The required precision of internal calculation, the circuit area for the number of antenna elements and wordlength, and the processing speed will be evaluated. The resource estimation provides a possible processor configuration with a current FPGA on the market. Computer simulations assuming a fading channel will show a fast convergence property with a finite number of training symbols. The proposed architecture has also been implemented and its operation was verified by beamforming evaluation through a radio propagation experiment.

FPGA-based 10-Gbit Ethernet Data Acquisition Interface for the Upgraded Electronics of the ATLAS Liquid Argon Calorimeters

CERN Document Server

Grohs, J P; The ATLAS collaboration

2013-01-01

The readout of the trigger signals of the ATLAS Liquid Argon (LAr) calorimeters is foreseen to be upgraded in order to prepare for operation during the first high-luminosity phase of the Large Hadron Collider (LHC). Signals with improved spatial granularity are planned to be received from the detector by a Digitial Processing System (DPS) in ATCA technology and will be sent in real-time to the ATLAS trigger system using custom optical links. These data are also sampled by the DPS for monitoring and will be read out by the regular Data Acquisition (DAQ) system of ATLAS which is a network-based PC-farm. The bandwidth between DPS module and DAQ system is expected to be in the order of 10 Gbit/s per module and a standard Ethernet protocol is foreseen to be used. DSP data will be prepared and sent by a modern FPGA either through a switch or directly to a Read-Out System (ROS) PC serving as buffer interface of the ATLAS DAQ. In a prototype setup, an ATCA blade equipped with a Xilinx Virtex-5 FPGA is used to send da...

A Service-oriented FPGA-based 3D Model Acquisition System

Directory of Open Access Journals (Sweden)

MACHIDON, O. M.

2015-11-01

Full Text Available This paper proposes a non-contact, low cost 3D scanning solution using laser striping. The solution is composed of two main parts: the hardware setup - used for acquiring the object's 3D surface information, and the software part - that processes the information and obtains the 3D model representation of the object. We propose two major improvements over the traditional scanning solutions: the 3D information acquisition is based on a reconfigurable hardware platform - a Xilinx Spartan 6 FPGA - which adds flexibility and scalability to the scanning process, while the 3D model reconstruction is remotely available "as a Service", by the means of a web interface that abstracts away the complexity of the underlying processes and improves the performance, while granting easy sharing between users. By separating data capture process from the 3D model reconstruction tasks the system gains in portability - a feature that is absent for most existing solutions. The service-oriented approach brings on a performance gain, since the computational intensive tasks are handled by dedicated servers and ease of use of the system, because the user does not have to bother managing and using the software tools locally.

Development of a multi-purpose logic module with the FPGA

International Nuclear Information System (INIS)

Nanbu, K.; Ishikawa, T.; Shimizu, H.

2008-01-01

We have developed a multi-purpose logic module (MPLM) with an FPGA. The internal circuit of this module can be modified easily with the FPGA. This kind of module enables trigger pulse processing for nuclear science. As a first step, the MPLM is used as an event tag generator in experiments with the FOREST detector system. (author)

Fine-grain reconfigurable platform: FPGA hardware design and software toolset development

International Nuclear Information System (INIS)

Pappas, I; Kalenteridis, V; Vassiliadis, N; Pournara, H; Siozios, K; Koutroumpezis, G; Tatas, K; Nikolaidis, S; Siskos, S; Soudris, D J; Thanailakis, A

2005-01-01

A complete system for the implementation of digital logic in a fine-grain reconfigurable platform is introduced. The system is composed of two parts. The fine-grain reconfigurable hardware platform (FPGA) on which the logic is implemented and the set of CAD tools for mapping logic to the FPGA platform. A novel energy-efficient FPGA architecture is presented (CLB, interconnect network, configuration hardware) and simulated in STM 0.18 μm CMOS technology. Concerning the tool flow, each tool can operate as a standalone program as well as part of a complete design framework, composed by existing and new tools

Fine-grain reconfigurable platform: FPGA hardware design and software toolset development

Energy Technology Data Exchange (ETDEWEB)

Pappas, I [Electronics and Computers Div., Department of Physics, Aristotle University of Thessaloniki, 54006 Thessaloniki (Greece); Kalenteridis, V [Electronics and Computers Div., Department of Physics, Aristotle University of Thessaloniki, 54006 Thessaloniki (Greece); Vassiliadis, N [Electronics and Computers Div., Department of Physics, Aristotle University of Thessaloniki, 54006 Thessaloniki (Greece); Pournara, H [Electronics and Computers Div., Department of Physics, Aristotle University of Thessaloniki, 54006 Thessaloniki (Greece); Siozios, K [VLSI Design and Testing Center, Department of Electrical and Computer Engineering, Democritus University of Thrace, 67100 Xanthi (Greece); Koutroumpezis, G [VLSI Design and Testing Center, Department of Electrical and Computer Engineering, Democritus University of Thrace, 67100 Xanthi (Greece); Tatas, K [VLSI Design and Testing Center, Department of Electrical and Computer Engineering, Democritus University of Thrace, 67100 Xanthi (Greece); Nikolaidis, S [Electronics and Computers Div., Department of Physics, Aristotle University of Thessaloniki, 54006 Thessaloniki (Greece); Siskos, S [Electronics and Computers Div., Department of Physics, Aristotle University of Thessaloniki, 54006 Thessaloniki (Greece); Soudris, D J [VLSI Design and Testing Center, Department of Electrical and Computer Engineering, Democritus University of Thrace, 67100 Xanthi (Greece); Thanailakis, A [Electronics and Computers Div., Department of Physics, Aristotle University of Thessaloniki, 54006 Thessaloniki (Greece)

2005-01-01

A complete system for the implementation of digital logic in a fine-grain reconfigurable platform is introduced. The system is composed of two parts. The fine-grain reconfigurable hardware platform (FPGA) on which the logic is implemented and the set of CAD tools for mapping logic to the FPGA platform. A novel energy-efficient FPGA architecture is presented (CLB, interconnect network, configuration hardware) and simulated in STM 0.18 {mu}m CMOS technology. Concerning the tool flow, each tool can operate as a standalone program as well as part of a complete design framework, composed by existing and new tools.

Anti Theft Mechanism Through Face recognition Using FPGA

Science.gov (United States)

Sundari, Y. B. T.; Laxminarayana, G.; Laxmi, G. Vijaya

2012-11-01

The use of vehicle is must for everyone. At the same time, protection from theft is also very important. Prevention of vehicle theft can be done remotely by an authorized person. The location of the car can be found by using GPS and GSM controlled by FPGA. In this paper, face recognition is used to identify the persons and comparison is done with the preloaded faces for authorization. The vehicle will start only when the authorized personís face is identified. In the event of theft attempt or unauthorized personís trial to drive the vehicle, an MMS/SMS will be sent to the owner along with the location. Then the authorized person can alert the security personnel for tracking and catching the vehicle. For face recognition, a Principal Component Analysis (PCA) algorithm is developed using MATLAB. The control technique for GPS and GSM is developed using VHDL over SPTRAN 3E FPGA. The MMS sending method is written in VB6.0. The proposed application can be implemented with some modifications in the systems wherever the face recognition or detection is needed like, airports, international borders, banking applications etc.

The integration of FPGA TDC inside White Rabbit node

International Nuclear Information System (INIS)

Li, H.; Xue, T.; Gong, G.; Li, J.

2017-01-01

White Rabbit technology is capable of delivering sub-nanosecond accuracy and picosecond precision of synchronization and normal data packets over the fiber network. Carry chain structure in FPGA is a popular way to build TDC and tens of picosecond RMS resolution has been achieved. The integration of WR technology with FPGA TDC can enhance and simplify the TDC in many aspects that includes providing a low jitter clock for TDC, a synchronized absolute UTC/TAI timestamp for coarse counter, a fancy way to calibrate the carry chain DNL and an easy to use Ethernet link for data and control information transmit. This paper presents a FPGA TDC implemented inside a normal White Rabbit node with sub-nanosecond measurement precision. The measured standard deviation reaches 50ps between two distributed TDCs. Possible applications of this distributed TDC are also discussed.

The integration of FPGA TDC inside White Rabbit node

Science.gov (United States)

Li, H.; Xue, T.; Gong, G.; Li, J.

2017-04-01

White Rabbit technology is capable of delivering sub-nanosecond accuracy and picosecond precision of synchronization and normal data packets over the fiber network. Carry chain structure in FPGA is a popular way to build TDC and tens of picosecond RMS resolution has been achieved. The integration of WR technology with FPGA TDC can enhance and simplify the TDC in many aspects that includes providing a low jitter clock for TDC, a synchronized absolute UTC/TAI timestamp for coarse counter, a fancy way to calibrate the carry chain DNL and an easy to use Ethernet link for data and control information transmit. This paper presents a FPGA TDC implemented inside a normal White Rabbit node with sub-nanosecond measurement precision. The measured standard deviation reaches 50ps between two distributed TDCs. Possible applications of this distributed TDC are also discussed.

Evaluation of the Single-precision Floatingpoint Vector Add Kernel Using the Intel FPGA SDK for OpenCL

Energy Technology Data Exchange (ETDEWEB)

Jin, Zheming [Argonne National Lab. (ANL), Argonne, IL (United States); Yoshii, Kazutomo [Argonne National Lab. (ANL), Argonne, IL (United States); Finkel, Hal [Argonne National Lab. (ANL), Argonne, IL (United States); Cappello, Franck [Argonne National Lab. (ANL), Argonne, IL (United States)

2017-04-20

Open Computing Language (OpenCL) is a high-level language that enables software programmers to explore Field Programmable Gate Arrays (FPGAs) for application acceleration. The Intel FPGA software development kit (SDK) for OpenCL allows a user to specify applications at a high level and explore the performance of low-level hardware acceleration. In this report, we present the FPGA performance and power consumption results of the single-precision floating-point vector add OpenCL kernel using the Intel FPGA SDK for OpenCL on the Nallatech 385A FPGA board. The board features an Arria 10 FPGA. We evaluate the FPGA implementations using the compute unit duplication and kernel vectorization optimization techniques. On the Nallatech 385A FPGA board, the maximum compute kernel bandwidth we achieve is 25.8 GB/s, approximately 76% of the peak memory bandwidth. The power consumption of the FPGA device when running the kernels ranges from 29W to 42W.

FPGA Online Tracking Algorithm for the PANDA Straw Tube Tracker

Science.gov (United States)

Liang, Yutie; Ye, Hua; Galuska, Martin J.; Gessler, Thomas; Kuhn, Wolfgang; Lange, Jens Soren; Wagner, Milan N.; Liu, Zhen'an; Zhao, Jingzhou

2017-06-01

A novel FPGA based online tracking algorithm for helix track reconstruction in a solenoidal field, developed for the PANDA spectrometer, is described. Employing the Straw Tube Tracker detector with 4636 straw tubes, the algorithm includes a complex track finder, and a track fitter. Implemented in VHDL, the algorithm is tested on a Xilinx Virtex-4 FX60 FPGA chip with different types of events, at different event rates. A processing time of 7 $\\mu$s per event for an average of 6 charged tracks is obtained. The momentum resolution is about 3\\% (4\\%) for $p_t$ ($p_z$) at 1 GeV/c. Comparing to the algorithm running on a CPU chip (single core Intel Xeon E5520 at 2.26 GHz), an improvement of 3 orders of magnitude in processing time is obtained. The algorithm can handle severe overlapping of events which are typical for interaction rates above 10 MHz.

Estimating the dimensions of the SEU-sensitive volume

International Nuclear Information System (INIS)

Abdel-Kader, W.G.; McNulty, P.J.; El-Teleaty, S.; Lynch, J.E.; Khondker, A.N.

1987-01-01

Simulations of the diffusion contribution to charge collection in SEU events are carried out under the simple assumption of random walk. The results of the simulation are combined with calculations of the funneling length for the field-assisted drift components to determine the effective thickness of the sensitive volume element to be used in calculations of soft-error rates for heavy-ion-induced and proton-induced upsets in microelectronic circuits. Comparison is made between predicted and measured SEU cross-sections for devices for which the critical charges are known from electrical measurements and the dimensions of the sensitive volume used are determined by the techniques described. The agreement is sufficient to encourage confidence that SEU rates can be calculated from first principles and a knowledge of the material, structural, and electrical characteristics of the device

Real-time machine vision system using FPGA and soft-core processor

Science.gov (United States)

Malik, Abdul Waheed; Thörnberg, Benny; Meng, Xiaozhou; Imran, Muhammad

2012-06-01

This paper presents a machine vision system for real-time computation of distance and angle of a camera from reference points in the environment. Image pre-processing, component labeling and feature extraction modules were modeled at Register Transfer (RT) level and synthesized for implementation on field programmable gate arrays (FPGA). The extracted image component features were sent from the hardware modules to a soft-core processor, MicroBlaze, for computation of distance and angle. A CMOS imaging sensor operating at a clock frequency of 27MHz was used in our experiments to produce a video stream at the rate of 75 frames per second. Image component labeling and feature extraction modules were running in parallel having a total latency of 13ms. The MicroBlaze was interfaced with the component labeling and feature extraction modules through Fast Simplex Link (FSL). The latency for computing distance and angle of camera from the reference points was measured to be 2ms on the MicroBlaze, running at 100 MHz clock frequency. In this paper, we present the performance analysis, device utilization and power consumption for the designed system. The FPGA based machine vision system that we propose has high frame speed, low latency and a power consumption that is much lower compared to commercially available smart camera solutions.

Stack Memory Implementation and Analysis of Timing Constraint, Power and Memory using FPGA

DEFF Research Database (Denmark)

Thind, Vandana; Pandey, Nisha; Pandey, Bishwajeet

2017-01-01

real-time output, so that source used to realize the project is not wasted and get an energy efficient design. However, Stack memory is an approach in which information is entered and deleted from the stack memory segment in the pattern of last in first out mechanism. There are several ways...... of implementation of stack memory algorithm but virtex4 and virtex7 low voltage were considered to be the most efficient platforms for its operation. The developed system is energy efficient as the algorim ensures less memory utilization, less power consumption and short time for signal travel.......Abstract— in this work of analysis, stack memory algorithm is implemented on a number of FPGA platforms like virtex4, virtex5, virtex6, virtex6 low power and virtex7 low voltage and very detailed observations/investigations were made about timing constraint, memory and power dissipation. The main...

Design and implementation of projects with Xilinx Zynq FPGA: a practical case

Science.gov (United States)

Travaglini, R.; D'Antone, I.; Meneghini, S.; Rignanese, L.; Zuffa, M.

The main advantage when using FPGAs with embedded processors is the availability of additional several high-performance resources in the same physical device. Moreover, the FPGA programmability allows for connect custom peripherals. Xilinx have designed a programmable device named Zynq-7000 (simply called Zynq in the following), which integrates programmable logic (identical to the other Xilinx "serie 7" devices) with a System on Chip (SOC) based on two embedded ARM processors. Since both parts are deeply connected, the designers benefit from performance of hardware SOC and flexibility of programmability as well. In this paper a design developed by the Electronic Design Department at the Bologna Division of INFN will be presented as a practical case of project based on Zynq device. It is developed by using a commercial board called ZedBoard hosting a FMC mezzanine with a 12-bit 500 MS/s ADC. The Zynq FPGA on the ZedBoard receives digital outputs from the ADC and send them to the acquisition PC, after proper formatting, through a Gigabit Ethernet link. The major focus of the paper will be about the methodology to develop a Zynq-based design with the Xilinx Vivado software, enlightening how to configure the SOC and connect it with the programmable logic. Firmware design techniques will be presented: in particular both VHDL and IP core based strategies will be discussed. Further, the procedure to develop software for the embedded processor will be presented. Finally, some debugging tools, like the embedded Logic Analyzer, will be shown. Advantages and disadvantages with respect to adopting FPGA without embedded processors will be discussed.