WorldWideScience

Sample records for forum system design

  1. Lead-cooled system design and challenges in the frame of Generation IV International Forum

    Science.gov (United States)

    Cinotti, Luciano; Smith, Craig F.; Sekimoto, Hiroshi; Mansani, Luigi; Reale, Marco; Sienicki, James J.

    2011-08-01

    The Generation IV International Forum (GIF) Technology Roadmap identified the Lead-cooled Fast Reactor (LFR) as a technology well suited for electricity generation, hydrogen production and actinide management in a closed fuel cycle. One of the most important features of the LFR is the fact that lead is a relatively inert coolant, a feature that conveys significant advantages in terms of safety, system simplification, and the consequent potential for economic performance. In 2004, the GIF LFR Provisional System Steering Committee was organized and began to develop the LFR System Research Plan. The committee selected two pool-type reactor concepts as candidates for international cooperation and joint development in the GIF framework: these are the Small Secure Transportable Autonomous Reactor (SSTAR); and the European Lead-cooled System (ELSY). The high boiling point (1745 °C) of lead has a beneficial impact to the safety of the system, whereas its high melting point (327.4 °C) requires new engineering strategies, especially for In-Service-Inspection and refuelling. Lead, especially at high temperatures, is also relatively corrosive towards structural materials. This necessitates that coolant purity and the level of dissolved oxygen be carefully controlled, in addition to the proper selection of structural materials. For the GIF LFR concepts, lead has been chosen as the coolant rather than Lead-Bismuth Eutectic primarily because of its greatly reduced generation of the alpha-emitting 210Po isotope formed in the coolant. This results in significantly reduced levels of radioactive contamination of the coolant while minimizing the effect of decay power in the coolant from such contaminants; an additional consideration is the desire to eliminate dependence on bismuth which might be a limited resource. This paper provides an overview of the historical development of the LFR, a summary of the advantages and challenges associated with heavy liquid metal coolants, and an

  2. Forum on specification and Design Languages

    CERN Document Server

    Maehne, Torsten

    2015-01-01

    This book brings together a selection of the best papers from the sixteenth edition of the Forum on specification and Design Languages Conference (FDL), which was held in September 2013 in Paris, France. FDL is a well-established international forum devoted to dissemination of research results, practical experiences and new ideas in the application of specification, design and verification languages to the design, modeling and verification of integrated circuits, complex hardware/software embedded systems, and mixed-technology systems. • Covers applications of formal methods for specification, verification and debug; • Includes embedded analog and mixed-signal system design; • Enables model-driven engineering for embedded systems design and development.

  3. Forum on Specifications and Design Languages 2012

    CERN Document Server

    2014-01-01

    This book brings together a selection of the best papers from the fifteenth edition of the Forum on specification and Design Languages Conference (FDL), which was held in September 2012 at Vienna University of Technology, Vienna, Austria.  FDL is a well-established international forum devoted to dissemination of research results, practical experiences and new ideas in the application of specification, design and verification languages to the design, modeling and verification of integrated circuits, complex hardware/software embedded systems, and mixed-technology systems.  ·         Covers Assertion Based Design, Verification & Debug; ·         Includes language-based modeling and design techniques for embedded systems; ·         Covers design, modeling and verification of mixed physical domain and mixed signal systems that include significant analog parts in electrical and non-electrical domains; ·         Includes formal and semi-formal system level design methods fo...

  4. A Semantics-Based Information Distribution Framework for Large Web-Based Course Forum System

    Science.gov (United States)

    Chim, Hung; Deng, Xiaotie

    2008-01-01

    We propose a novel data distribution framework for developing a large Web-based course forum system. In the distributed architectural design, each forum server is fully equipped with the ability to support some course forums independently. The forum servers collaborating with each other constitute the whole forum system. Therefore, the workload of…

  5. 13th Forum for Specification and Design Languages (FDL) conference

    CERN Document Server

    Morawiec, Adam; System Specification and Design Languages : Selected Contributions from FDL 2010

    2012-01-01

    This book brings together a selection of the best papers from the thirteenth edition of the Forum on specification and Design Languages Conference (FDL), which was held in Southampton, UK in September 2010.  FDL is a well established international forum devoted to dissemination of research results, practical experiences and new ideas in the application of specification, design and verification languages to the design, modelling and verification of integrated circuits, complex hardware/software embedded systems, and mixed-technology systems. Covers design verification, automatic synthesis and mechanized debug aids; Includes language-based modeling and design techniques for embedded systems; Covers design, modeling and verification of mixed physical domain and mixed signal systems that include significant analog parts in electrical and non-electrical domains; Includes formal and semi-formal system level design methods for complex embedded systems based on the Unified Modelling Language (UML) and Model Driven E...

  6. 17th edition of the Forum on specification and Design Languages Conference

    CERN Document Server

    Pasaje, Julio

    2016-01-01

    This book brings together a selection of the best papers from the seventeenth edition of the Forum on specification and Design Languages Conference (FDL), which took place on October 14-16, 2014, in Munich, Germany.  FDL is a well-established international forum devoted to dissemination of research results, practical experiences and new ideas in the application of specification, design and verification languages to the design, modeling and verification of integrated circuits, complex hardware/software embedded systems, and mixed-technology systems.   •Covers Assertion Based Design, Verification & Debug; •Includes language-based modeling and design techniques for embedded systems; •Covers design, modeling and verification of mixed physical domain and mixed signal systems; •Includes formal and semi-formal system level design methods for complex embedded systems based on the Unified Modelling Language (UML) and Model Driven Engineering (MDE); •Covers parallel architectures – both as platforms f...

  7. 18th edition of the Forum on specification and Design Languages Conference

    CERN Document Server

    Wille, Robert

    2016-01-01

    This book brings together a selection of the best papers from the eighteenth edition of the Forum on specification and Design Languages Conference (FDL), which took place on September 14-16, 2015, in Barcelona, Spain. FDL is a well-established international forum devoted to dissemination of research results, practical experiences and new ideas in the application of specification, design and verification languages to the design, modeling and verification of integrated circuits, complex hardware/software embedded systems, and mixed-technology systems. Covers Assertion Based Design, Verification & Debug; Includes language-based modeling and design techniques for embedded systems; Covers design, modeling and verification of mixed physical domain and mixed signal systems that include significant analog parts in electrical and non-electrical domains; Includes formal and semi-formal system level design methods for complex embedded systems based on the Unified Modelling Language (UML) and Model Driven Engineering...

  8. Proceedings of the flat-plate solar array project research forum on photovoltaic metallization systems

    Energy Technology Data Exchange (ETDEWEB)

    None

    1983-11-15

    A Photovoltaic Metallization Research Forum, under the sponsorship of the Jet Propulsion Laboratory's Flat-Plate Solar Array Project and the US Department of Energy, was held March 16-18, 1983 at Pine Mountain, Georgia. The Forum consisted of five sessions, covering (1) the current status of metallization systems, (2) system design, (3) thick-film metallization, (4) advanced techniques and (5) future metallization challenges. Twenty-three papers were presented.

  9. Corporate planning and LAN information systems as forums

    CERN Document Server

    Sabre, Ru Michael

    1992-01-01

    Corporate Planning and LAN: Information Systems as Forums provides information pertinent to the Forum Information System (FIS), a conceptual basis for all corporate planning. This book presents an information system which, by means of LAN, organizational development style prototyping, and organizational learning utilization, can open communications among managers, executives, owners, and employees in a corporate setting.Organized into 10 chapters, this book begins with an overview of the four phases to the eventual use of the FIS in a corporate setting. This text then explores FIS as part of a

  10. 76 FR 62164 - VASRD Improvement Forum-Updating Disability Criteria for the Respiratory System, Cardiovascular...

    Science.gov (United States)

    2011-10-06

    ... AFFAIRS VASRD Improvement Forum--Updating Disability Criteria for the Respiratory System, Cardiovascular...) Improvement Forum-- Updating Disability Criteria for the Respiratory System, Cardiovascular System, Hearing... four body systems: (1) Respiratory System (38 CFR 4.96-4.97), (2) the Cardiovascular System (38 CFR 4...

  11. Reflections of the Veterans Administration Puget Sound Health Care System Regional Nurse Practitioner Residency Forum.

    Science.gov (United States)

    Brown, Kameka; Poppe, Anne; Kaminetzky, Catherine P; Wipf, Joyce A; Woods, Nancy Fugate

    2016-01-01

    There is a proliferation of advanced practice residency programs. However, there is no uniform model of developing and evaluating program success. An information forum was convened by Veterans Health Administration Puget Sound Health Care System's Center for Primary Care Education on September 17, 2013, in Seattle, Washington, to explore critical aspects of residency models. The three objectives of this forum were to develop a shared understanding of key elements needed to support nurse practitioner residencies; define the unique needs of nurse practitioner trainees who are interested in applying for a residency; and examine the viability of designing a replicable nurse practitioner residency model benchmarking stakeholder best practices. This article describes the organization of the forum and summarizes the presentations during the program. The companion article explores key recommendations from the forum related to future development of residency "toolkits" to aid in future evaluation and accreditation. As nurse practitioner residencies continue to develop and evolve, more is needed in the area of structure and alignment. Published 2015. This article is a U.S. Government work and is in the public domain in the USA.

  12. Visual Analysis of MOOC Forums with iForum.

    Science.gov (United States)

    Fu, Siwei; Zhao, Jian; Cui, Weiwei; Qu, Huamin

    2017-01-01

    Discussion forums of Massive Open Online Courses (MOOC) provide great opportunities for students to interact with instructional staff as well as other students. Exploration of MOOC forum data can offer valuable insights for these staff to enhance the course and prepare the next release. However, it is challenging due to the large, complicated, and heterogeneous nature of relevant datasets, which contain multiple dynamically interacting objects such as users, posts, and threads, each one including multiple attributes. In this paper, we present a design study for developing an interactive visual analytics system, called iForum, that allows for effectively discovering and understanding temporal patterns in MOOC forums. The design study was conducted with three domain experts in an iterative manner over one year, including a MOOC instructor and two official teaching assistants. iForum offers a set of novel visualization designs for presenting the three interleaving aspects of MOOC forums (i.e., posts, users, and threads) at three different scales. To demonstrate the effectiveness and usefulness of iForum, we describe a case study involving field experts, in which they use iForum to investigate real MOOC forum data for a course on JAVA programming.

  13. Designing Deliberation Systems

    DEFF Research Database (Denmark)

    Rose, Jeremy; Sæbø, Øystein

    2010-01-01

    the potential to revitalize and transform citizen engagement in democracy.  Although the majority of web 2.0 systems enable these discourses to some extent, government institutions commission and manage specialized deliberation systems (information systems designed to support participative discourse) intended...... to promote citizen engagement.  The most common examples of these are political discussion forums.  Though usually considered trivial adaptations of well-known technologies, these types of deliberative systems are often unsuccessful, and present a distinct set of design and management challenges.......  In this article we analyze the issues involved in establishing political deliberation systems under four headings: stakeholder engagement, web platform design, service management, political process re-shaping and evaluation and improvement.  We review the existing literature and present a longitudinal case study...

  14. Proceedings of the Flat-Plate Solar Array Project Research Forum on the design of flat-plate photovoltaic arrays for central stations

    Energy Technology Data Exchange (ETDEWEB)

    None

    1983-01-01

    The Flat-Plate Solar Array Project, managed by the Jet Propulsion Laboratory for the US Department of Energy, has focused on advancing technologies relevant to the design and construction of megawatt-level central-station systems. Photovoltaic modules and arrays for flat-plate central-station or other large-scale electric power production facilities require the establishment of a technical base that resolves design issues and results in practical and cost-effective configurations. The Central Station Research Forum addressed design, qualification and maintenance issues related to central-station arrays derived from the engineering and operating experiences of early applications and parallel laboratory research activities. Technical issues were examined from the viewpoint of the utility engineer, architect-engineer and laboratory researcher. The forum included presentations on optimum source-circuit designs, module insulation design for high system voltages, array safety, structural interface design, measurements and array operation and maintenance. The Research Forum focused on current capabilities as well as design difficulties requiring additional technological thrusts and/or continued research emphasis. Session topic summaries highlighting major points during group discussions, identifying promising technical approaches or areas of future research, are presented.

  15. 75 FR 391 - Medical Device Quality System Regulation Educational Forum on Risk Management Through the Product...

    Science.gov (United States)

    2010-01-05

    ... No. FDA-2009-N-0664] Medical Device Quality System Regulation Educational Forum on Risk Management... workshop is intended to provide information about FDA's Medical Device Quality Systems Regulation (QSR) to... Device Industry Coalition (FMDIC), is announcing a public workshop entitled ``Medical Device Quality...

  16. Distributed System Design Checklist

    Science.gov (United States)

    Hall, Brendan; Driscoll, Kevin

    2014-01-01

    This report describes a design checklist targeted to fault-tolerant distributed electronic systems. Many of the questions and discussions in this checklist may be generally applicable to the development of any safety-critical system. However, the primary focus of this report covers the issues relating to distributed electronic system design. The questions that comprise this design checklist were created with the intent to stimulate system designers' thought processes in a way that hopefully helps them to establish a broader perspective from which they can assess the system's dependability and fault-tolerance mechanisms. While best effort was expended to make this checklist as comprehensive as possible, it is not (and cannot be) complete. Instead, we expect that this list of questions and the associated rationale for the questions will continue to evolve as lessons are learned and further knowledge is established. In this regard, it is our intent to post the questions of this checklist on a suitable public web-forum, such as the NASA DASHLink AFCS repository. From there, we hope that it can be updated, extended, and maintained after our initial research has been completed.

  17. Utilizing Learners' Negative Ratings in Semantic Content-Based Recommender System for e-Learning Forum

    Science.gov (United States)

    Albatayneh, Naji Ahmad; Ghauth, Khairil Imran; Chua, Fang-Fang

    2018-01-01

    Nowadays, most of e-learning systems embody online discussion forums as a medium for collaborative learning that supports knowledge sharing and information exchanging between learners. The exponential growth of the available shared information in e-learning online discussion forums has caused a difficulty for learners in discovering interesting…

  18. FONESYS: The FOrum and NEtwork of SYStem Thermal-Hydraulic Codes in Nuclear Reactor Thermal-Hydraulics

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, S.H., E-mail: k175ash@kins.re.kr [Korea Institute of Nuclear Safety (KINS) (Korea, Republic of); Aksan, N., E-mail: nusr.aksan@gmail.com [University of Pisa San Piero a Grado Nuclear Research Group (GRNSPG) (Italy); Austregesilo, H., E-mail: henrique.austregesilo@grs.de [Gesellschaft für Anlagen- und Reaktorsicherheit (GRS) (Germany); Bestion, D., E-mail: dominique.bestion@cea.fr [Commissariat à l’énergie atomique et aux énergies alternatives (CEA) (France); Chung, B.D., E-mail: bdchung@kaeri.re.kr [Korea Atomic Energy Research Institute (KAERI) (Korea, Republic of); D’Auria, F., E-mail: f.dauria@ing.unipi.it [University of Pisa San Piero a Grado Nuclear Research Group (GRNSPG) (Italy); Emonot, P., E-mail: philippe.emonot@cea.fr [Commissariat à l’énergie atomique et aux énergies alternatives (CEA) (France); Gandrille, J.L., E-mail: jeanluc.gandrille@areva.com [AREVA NP (France); Hanninen, M., E-mail: markku.hanninen@vtt.fi [VTT Technical Research Centre of Finland (VTT) (Finland); Horvatović, I., E-mail: i.horvatovic@ing.unipi.it [University of Pisa San Piero a Grado Nuclear Research Group (GRNSPG) (Italy); Kim, K.D., E-mail: kdkim@kaeri.re.kr [Korea Atomic Energy Research Institute (KAERI) (Korea, Republic of); Kovtonyuk, A., E-mail: a.kovtonyuk@ing.unipi.it [University of Pisa San Piero a Grado Nuclear Research Group (GRNSPG) (Italy); Petruzzi, A., E-mail: a.petruzzi@ing.unipi.it [University of Pisa San Piero a Grado Nuclear Research Group (GRNSPG) (Italy)

    2015-01-15

    Highlights: • We briefly presented the project called Forum and Network of System Thermal-Hydraulics Codes in Nuclear Reactor Thermal-Hydraulics (FONESYS). • We presented FONESYS participants and their codes. • We explained FONESYS projects motivation, its main targets and working modalities. • We presented FONESYS position about projects topics and subtopics. - Abstract: The purpose of this article is to present briefly the project called Forum and Network of System Thermal-Hydraulics Codes in Nuclear Reactor Thermal-Hydraulics (FONESYS), its participants, the motivation for the project, its main targets and working modalities. System Thermal-Hydraulics (SYS-TH) codes, also as part of the Best Estimate Plus Uncertainty (BEPU) approaches, are expected to achieve a more-and-more relevant role in nuclear reactor technology, safety and design. Namely, the number of code-users can easily be predicted to increase in the countries where nuclear technology is exploited. Thus, the idea of establishing a forum and a network among the code developers and with possible extension to code users has started to have major importance and value. In this framework the FONESYS initiative has been created. The main targets of FONESYS are: • To promote the use of SYS-TH Codes and the application of the BEPU approaches. • To establish acceptable and recognized procedures and thresholds for Verification and Validation (V and V). • To create a common ground for discussing envisaged improvements in various areas, including user-interface, and the connection with other numerical tools, including Computational Fluid Dynamics (CFD) Codes.

  19. Proceedings of the Air Force Forum for Intelligent Tutoring Systems

    Science.gov (United States)

    1989-04-01

    then the learner has less intellectual and emotional energy for learning what is supposedly being taught. The goal of interface design, therefore, is...ascribed to geniuses in areas ranging from mathematics to music . lie determined that no genius produced a truly exceptional work without at least ten...Association for Computing Machinery. White, B. Y., & Frederiksen, J. R. (1986). Progressions of qualilaive models as foundations for inteligent

  20. Traveling through Time: The Forum Guide to Longitudinal Data Systems. Book Four of Four: Advanced LDS Usage. NFES 2011-802

    Science.gov (United States)

    National Forum on Education Statistics, 2011

    2011-01-01

    This document is the fourth and final installment of this Forum series of guides on longitudinal data systems (LDS). One goal of the National Forum on Education Statistics (the Forum) is to improve the quality of education data gathered for use by policymakers and program decisionmakers. An approach to furthering this goal has been to pool the…

  1. Developing Drought Outlook Forums in Support of a Regional Drought Early Warning Information System

    Science.gov (United States)

    Mcnutt, C. A.; Pulwarty, R. S.; Darby, L. S.; Verdin, J. P.; Webb, R. S.

    2011-12-01

    The National Integrated Drought Information System (NIDIS) Act of 2006 (P.L. 109-430) charged NIDIS with developing the leadership and partnerships necessary to implement an integrated national drought monitoring and forecasting system that creates a drought "early warning system". The drought early warning information system should be capable of providing accurate, timely and integrated information on drought conditions at the relevant spatial scale to facilitate proactive decisions aimed at minimizing the economic, social and ecosystem losses associated with drought. As part of this effort, NIDIS has held Regional Drought Outlook Forums in several regions of the U.S. The purpose of the Forums is to inform practices that reduce vulnerability to drought through an interactive and collaborative process that includes the users of the information. The Forums have focused on providing detailed assessments of present conditions and impacts, comparisons with past drought events, and seasonal predictions including discussion of the state and expected evolution of the El Niño Southern Oscillation phenomena. Regional Climate Outlook Forums (RCOFs) that include close interaction between information providers and users are not a new concept, however. RCOFs started in Africa in the 1990s in response to the 1997-98 El Niño and have since expanded to South America, Asia, the Pacific islands, and the Caribbean. As a result of feedback from the RCOFs a large body of research has gone into improving seasonal forecasts and the capacity of the users to apply the information in a way that improves their decision-making. Over time, it has become clear that more is involved than just improving the interaction between the climate forecasters and decision-makers. NIDIS is using the RCOF approach as one component in a larger effort to develop Regional Drought Early Warning Information Systems (RDEWS) around the U.S. Using what has been learned over the past decade in the RCOF process

  2. Forum Kayastha

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Biosciences. Forum Kayastha. Articles written in Journal of Biosciences. Volume 40 Issue 2 June 2015 pp 313-324 Articles. Andrographolide suppresses epithelial mesenchymal transition by inhibition of MAPK signalling pathway in lens epithelial cells · Forum Kayastha Kaid Johar Devarshi ...

  3. Internet Forums for Suicide Bereavement.

    Science.gov (United States)

    Bailey, Eleanor; Krysinska, Karolina; O'Dea, Bridianne; Robinson, Jo

    2017-08-10

    Bereavement by suicide is associated with a number of consequences including poor mental health outcomes and increased suicide risk. Despite this, the bereaved by suicide may be reluctant to seek help from friends, family, and professionals. Internet forums and social networking sites are a popular avenue of support for the bereaved, but to date there is a lack of research into their use and efficacy. To survey users of suicide bereavement Internet forums and Facebook groups regarding their help-seeking behaviors, use of forums, and perceived benefits and limitations of such use. This study employed a cross-sectional design in which users of suicide bereavement Internet forums and Facebook groups completed an anonymous online survey. Participants were 222 users of suicide bereavement Internet forums. Most participants (93.2%) had sought face-to-face help from sources other than Internet forums, but were more likely to seek help in the near future from informal rather than formal sources. Forums were perceived as highly beneficial and there were few limitations. The generalizability of these results to other internet forums may be limited. Additionally, we were not able to examine differences between forums in terms of quality or user-reported efficacy. Finally, the data reflects the subjective views of forum users, which may differ from the views of moderators or experts. Internet forums, including Facebook groups, appear to be a useful adjunct to face-to-face help-seeking for supporting those who have been bereaved by suicide.

  4. Educated Guesses and Other Ways to Address the Pharmacological Uncertainty of Designer Drugs : An Exploratory Study of Experimentation Through an Online Drug Forum

    NARCIS (Netherlands)

    Berning, M.; Hardon, A.

    2016-01-01

    This study examines how experimentation with designer drugs is mediated by the Internet. We selected a popular drug forum that presents reports on self-experimentation with little or even completely unexplored designer drugs to examine: (1) how participants report their “trying out” of new compounds

  5. Forum Commentary

    Science.gov (United States)

    Kanno, Yasuko

    2014-01-01

    Social class has been underresearched in the field of applied linguistics. The central goal of this forum was to stimulate more conversation about social class as it impacts language learning and teaching. In this article, I comment on 3 salient themes that have emerged in the 5 articles: (1) agency and structure in language learning and teaching,…

  6. The Accelerator Reliability Forum

    CERN Document Server

    Lüdeke, Andreas; Giachino, R

    2014-01-01

    A high reliability is a very important goal for most particle accelerators. The biennial Accelerator Reliability Workshop covers topics related to the design and operation of particle accelerators with a high reliability. In order to optimize the over-all reliability of an accelerator one needs to gather information on the reliability of many different subsystems. While a biennial workshop can serve as a platform for the exchange of such information, the authors aimed to provide a further channel to allow for a more timely communication: the Particle Accelerator Reliability Forum [1]. This contribution will describe the forum and advertise it’s usage in the community.

  7. Case Study: Using The OMG SWRADIO Profile and SDR Forum Input for NASA's Space Telecommunications Radio System

    Science.gov (United States)

    Briones, Janette C.; Handler, Louis M.; Hall, Steve C.; Reinhart, Richard C.; Kacpura, Thomas J.

    2009-01-01

    The Space Telecommunication Radio System (STRS) standard is a Software Defined Radio (SDR) architecture standard developed by NASA. The goal of STRS is to reduce NASA s dependence on custom, proprietary architectures with unique and varying interfaces and hardware and support reuse of waveforms across platforms. The STRS project worked with members of the Object Management Group (OMG), Software Defined Radio Forum, and industry partners to leverage existing standards and knowledge. This collaboration included investigating the use of the OMG s Platform-Independent Model (PIM) SWRadio as the basis for an STRS PIM. This paper details the influence of the OMG technologies on the STRS update effort, findings in the STRS/SWRadio mapping, and provides a summary of the SDR Forum recommendations.

  8. Designing information systems

    CERN Document Server

    Blethyn, Stanley G

    2014-01-01

    Designing Information Systems focuses on the processes, methodologies, and approaches involved in designing information systems. The book first describes systems, management and control, and how to design information systems. Discussions focus on documents produced from the functional construction function, users, operators, analysts, programmers and others, process management and control, levels of management, open systems, design of management information systems, and business system description, partitioning, and leveling. The text then takes a look at functional specification and functiona

  9. Learning Systems Design.

    Science.gov (United States)

    Nelson, Harold G.

    1994-01-01

    Discusses the need to learn how to design learning systems involving the synthesis of systems thinking and design actions. Design intelligence is considered, based on theories of multiple intelligence; new models of the information age that require systems design are discussed; and the roles of symbolic analysts and symbolic synthesists are…

  10. Software Design Analyzer System

    Science.gov (United States)

    Tausworthe, R. C.

    1985-01-01

    CRISP80 software design analyzer system a set of programs that supports top-down, hierarchic, modular structured design, and programing methodologies. CRISP80 allows for expression of design as picture of program.

  11. Control system design guide

    Energy Technology Data Exchange (ETDEWEB)

    Sellers, David; Friedman, Hannah; Haasl, Tudi; Bourassa, Norman; Piette, Mary Ann

    2003-05-01

    The ''Control System Design Guide'' (Design Guide) provides methods and recommendations for the control system design process and control point selection and installation. Control systems are often the most problematic system in a building. A good design process that takes into account maintenance, operation, and commissioning can lead to a smoothly operating and efficient building. To this end, the Design Guide provides a toolbox of templates for improving control system design and specification. HVAC designers are the primary audience for the Design Guide. The control design process it presents will help produce well-designed control systems that achieve efficient and robust operation. The spreadsheet examples for control valve schedules, damper schedules, and points lists can streamline the use of the control system design concepts set forth in the Design Guide by providing convenient starting points from which designers can build. Although each reader brings their own unique questions to the text, the Design Guide contains information that designers, commissioning providers, operators, and owners will find useful.

  12. Designing photovoltaic systems

    Energy Technology Data Exchange (ETDEWEB)

    Jones, G.J.

    1987-03-22

    Photovoltaic system design understanding has matured rapidly in the last decade. Initially the design process emphasized detailed modeling, load match, and on-site energy storage. This entire approach ended once the systems were allowed to operate interactively with the utility. Current design thinking emphasizes system energy cost in relation to utility avoided cost. This leads to a new logic that allows for much simplified design procedures. This paper reviews these procedures for the two types of grid-connected photovoltaic systems and presents a brief discussion of balance-of-system options.

  13. Clothing Systems Design Lab

    Data.gov (United States)

    Federal Laboratory Consortium — The Clothing Systems Design Lab houses facilities for the design and rapid prototyping of military protective apparel.Other focuses include: creation of patterns and...

  14. Optical system design

    CERN Document Server

    Fischer, Robert F

    2008-01-01

    Honed for more than 20 years in an SPIE professional course taught by renowned optical systems designer Robert E. Fischer, Optical System Design, Second Edition brings you the latest cutting-edge design techniques and more than 400 detailed diagrams that clearly illustrate every major procedure in optical design. This thoroughly updated resource helps you work better and faster with computer-aided optical design techniques, diffractive optics, and the latest applications, including digital imaging, telecommunications, and machine vision. No need for complex, unnecessary mathematical derivations-instead, you get hundreds of examples that break the techniques down into understandable steps. For twenty-first century optical design without the mystery, the authoritative Optical Systems Design, Second Edition features: Computer-aided design use explained through sample problems Case studies of third-millennium applications in digital imaging, sensors, lasers, machine vision, and more New chapters on optomechanic...

  15. HVAC systems design handbook

    CERN Document Server

    Haines, Roger W

    2010-01-01

    Thoroughly updated with the latest codes, technologies, and practices, this all-in-one resource provides details, calculations, and specifications for designing efficient and effective residential, commercial, and industrial HVAC systems. HVAC Systems Design Handbook, Fifth Edition, features new information on energy conservation and computer usage for design and control, as well as the most recent International Code Council (ICC) Mechanical Code requirements. Detailed illustrations, tables, and essential HVAC equations are also included. This comprehensive guide contains everything you need to design, operate, and maintain peak-performing HVAC systems.

  16. Human Systems Design Criteria

    DEFF Research Database (Denmark)

    Rasmussen, Jens

    1982-01-01

    This paper deals with the problem of designing more humanised computer systems. This problem can be formally described as the need for defining human design criteria, which — if used in the design process - will secure that the systems designed get the relevant qualities. That is not only...... the necessary functional qualities but also the needed human qualities. The author's main argument is, that the design process should be a dialectical synthesis of the two points of view: Man as a System Component, and System as Man's Environment. Based on a man's presentation of the state of the art a set...... of design criteria is suggested and their relevance discussed. The point is to focus on the operator rather than on the computer. The crucial question is not to program the computer to work on its own conditions, but to “program” the operator to function on human conditions....

  17. Rectenna system design

    Science.gov (United States)

    Brown, W. C.; Dickinson, R. M.; Nalos, E. J.; Ott, J. H.

    1980-01-01

    The function of the rectenna in the solar power satellite system is described and the basic design choices based on the desired microwave field concentration and ground clearance requirements are given. One important area of concern, from the EMI point of view, harmonic reradiation and scattering from the rectenna is also designed. An optimization of a rectenna system design to minimize costs was performed. The rectenna cost breakdown for a 56 w installation is given as an example.

  18. Design of combi systems

    DEFF Research Database (Denmark)

    Andersen, Elsa; Shah, Louise Jivan; Furbo, Simon

    2001-01-01

    )] This paper addresses an experimentally and theoretically investigation of three different marketed combi systems. Two different combi systems, based on the above mentioned system design, with units where the auxiliary energy supply system is built into the same cabinet as the hot-water tank and one combi...... with constant daily hot water consumption, consumption patterns and space heating demand for all days, and the results are used to validate TrnSys models. Based on simulation models of the combi systems, the thermal behavior is simulated and the thermal performance and the solar fraction of the systems...... simulation models where a number of different design-, control- and consumption parameters are varied....

  19. Applied Control Systems Design

    CERN Document Server

    Mahmoud, Magdi S

    2012-01-01

    Applied Control System Design examines several methods for building up systems models based on real experimental data from typical industrial processes and incorporating system identification techniques. The text takes a comparative approach to the models derived in this way judging their suitability for use in different systems and under different operational circumstances. A broad spectrum of control methods including various forms of filtering, feedback and feedforward control is applied to the models and the guidelines derived from the closed-loop responses are then composed into a concrete self-tested recipe to serve as a check-list for industrial engineers or control designers. System identification and control design are given equal weight in model derivation and testing to reflect their equality of importance in the proper design and optimization of high-performance control systems. Readers’ assimilation of the material discussed is assisted by the provision of problems and examples. Most of these e...

  20. Psychology of system design

    CERN Document Server

    Meister, D

    2014-01-01

    This is a book about systems, including: systems in which humans control machines; systems in which humans interact with humans and the machine component is relatively unimportant; systems which are heavily computerized and those that are not; and governmental, industrial, military and social systems. The book deals with both traditional systems like farming, fishing and the military, and with systems just now tentatively emerging, like the expert and the interactive computer system. The emphasis is on the system concept and its implications for analysis, design and evaluation of these many di

  1. High Energy Physics Forum for Computational Excellence: Working Group Reports (I. Applications Software II. Software Libraries and Tools III. Systems)

    Energy Technology Data Exchange (ETDEWEB)

    Habib, Salman [Argonne National Lab. (ANL), Argonne, IL (United States); Roser, Robert [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); LeCompte, Tom [Argonne National Lab. (ANL), Argonne, IL (United States); Marshall, Zach [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Borgland, Anders [SLAC National Accelerator Lab., Menlo Park, CA (United States); Viren, Brett [Brookhaven National Lab. (BNL), Upton, NY (United States); Nugent, Peter [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Asai, Makato [SLAC National Accelerator Lab., Menlo Park, CA (United States); Bauerdick, Lothar [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Finkel, Hal [Argonne National Lab. (ANL), Argonne, IL (United States); Gottlieb, Steve [Indiana Univ., Bloomington, IN (United States); Hoeche, Stefan [SLAC National Accelerator Lab., Menlo Park, CA (United States); Sheldon, Paul [Vanderbilt Univ., Nashville, TN (United States); Vay, Jean-Luc [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Elmer, Peter [Princeton Univ., NJ (United States); Kirby, Michael [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Patton, Simon [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Potekhin, Maxim [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Yanny, Brian [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Calafiura, Paolo [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Dart, Eli [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Gutsche, Oliver [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Izubuchi, Taku [Brookhaven National Lab. (BNL), Upton, NY (United States); Lyon, Adam [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Petravick, Don [Univ. of Illinois, Urbana-Champaign, IL (United States). National Center for Supercomputing Applications (NCSA)

    2015-10-29

    Computing plays an essential role in all aspects of high energy physics. As computational technology evolves rapidly in new directions, and data throughput and volume continue to follow a steep trend-line, it is important for the HEP community to develop an effective response to a series of expected challenges. In order to help shape the desired response, the HEP Forum for Computational Excellence (HEP-FCE) initiated a roadmap planning activity with two key overlapping drivers -- 1) software effectiveness, and 2) infrastructure and expertise advancement. The HEP-FCE formed three working groups, 1) Applications Software, 2) Software Libraries and Tools, and 3) Systems (including systems software), to provide an overview of the current status of HEP computing and to present findings and opportunities for the desired HEP computational roadmap. The final versions of the reports are combined in this document, and are presented along with introductory material.

  2. High Energy Physics Forum for Computational Excellence: Working Group Reports (I. Applications Software II. Software Libraries and Tools III. Systems)

    Energy Technology Data Exchange (ETDEWEB)

    Habib, Salman [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Roser, Robert [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)

    2015-10-28

    Computing plays an essential role in all aspects of high energy physics. As computational technology evolves rapidly in new directions, and data throughput and volume continue to follow a steep trend-line, it is important for the HEP community to develop an effective response to a series of expected challenges. In order to help shape the desired response, the HEP Forum for Computational Excellence (HEP-FCE) initiated a roadmap planning activity with two key overlapping drivers -- 1) software effectiveness, and 2) infrastructure and expertise advancement. The HEP-FCE formed three working groups, 1) Applications Software, 2) Software Libraries and Tools, and 3) Systems (including systems software), to provide an overview of the current status of HEP computing and to present findings and opportunities for the desired HEP computational roadmap. The final versions of the reports are combined in this document, and are presented along with introductory material.

  3. Residential photovoltaic system designs

    Energy Technology Data Exchange (ETDEWEB)

    Russell, M. C.

    1981-01-01

    A project to develop Residential Photovoltaic Systems has begun at Massachusetts Institute of Technology Lincoln Laboratory with the construction and testing of five Prototype Systems. All of these systems utilize a roof-mounted photovoltaic array and allow excess solar-generated electric energy to be fed back to the local utility grid, eliminating the need for on-site storage. Residential photovoltaic system design issues are discussed and specific features of the five Prototype Systems now under test are presented.

  4. Control system design method

    Science.gov (United States)

    Wilson, David G [Tijeras, NM; Robinett, III, Rush D.

    2012-02-21

    A control system design method and concomitant control system comprising representing a physical apparatus to be controlled as a Hamiltonian system, determining elements of the Hamiltonian system representation which are power generators, power dissipators, and power storage devices, analyzing stability and performance of the Hamiltonian system based on the results of the determining step and determining necessary and sufficient conditions for stability of the Hamiltonian system, creating a stable control system based on the results of the analyzing step, and employing the resulting control system to control the physical apparatus.

  5. Resilient computer system design

    CERN Document Server

    Castano, Victor

    2015-01-01

    This book presents a paradigm for designing new generation resilient and evolving computer systems, including their key concepts, elements of supportive theory, methods of analysis and synthesis of ICT with new properties of evolving functioning, as well as implementation schemes and their prototyping. The book explains why new ICT applications require a complete redesign of computer systems to address challenges of extreme reliability, high performance, and power efficiency. The authors present a comprehensive treatment for designing the next generation of computers, especially addressing safety-critical, autonomous, real time, military, banking, and wearable health care systems.   §  Describes design solutions for new computer system - evolving reconfigurable architecture (ERA) that is free from drawbacks inherent in current ICT and related engineering models §  Pursues simplicity, reliability, scalability principles of design implemented through redundancy and re-configurability; targeted for energy-,...

  6. Designing Menu Selection Systems.

    Science.gov (United States)

    Schneiderman, Ben

    1986-01-01

    Focuses on the multiple design issues involved in creating successful menu selection systems: semantic organization, response time, display rates, shortcuts for frequent users, titles, phrasing of menu items, graphic layout, and selection mechanisms. Pop-up and embedded menus, experimental results, and design guidelines are also covered.…

  7. Remote Systems Design & Deployment

    Energy Technology Data Exchange (ETDEWEB)

    Bailey, Sharon A.; Baker, Carl P.; Valdez, Patrick LJ

    2009-08-28

    The Pacific Northwest National Laboratory (PNNL) was tasked by Washington River Protection Solutions, LLC (WRPS) to provide information and lessons learned relating to the design, development and deployment of remote systems, particularly remote arm/manipulator systems. This report reflects PNNL’s experience with remote systems and lays out the most important activities that need to be completed to successfully design, build, deploy and operate remote systems in radioactive and chemically contaminated environments. It also contains lessons learned from PNNL’s work experiences, and the work of others in the national laboratory complex.

  8. Telecommunications systems design

    Science.gov (United States)

    Yuen, J. H.

    1982-01-01

    The general configuration of deep space telecommunication systems is reviewed with regard to the design criteria necessary to insure the integrity of the system's telemetry, command, and tracking functions. The signal to noise spectral density ratios that characterize telecommunications performance are defined in terms of the link parameters. For design control, a statistical approach to predict link performance and to assess its uncertainty is described.

  9. Users’ attention behaviors and features in internet forum

    Directory of Open Access Journals (Sweden)

    Yong-Zhong Sha

    2015-11-01

    Full Text Available Purpose: Attention resource is scarce. Organizing community activities in online forums faces the challenge of attracting users’ limited attention. Understanding how users of online forums allocate, maintain, and change their attentional focus and what features of online forms influence their attention behaviors is critical for effective information design. This paper seeks understanding of users’ attention behaviors and features when they participate in discussions in online forums. Design/methodology/approach: A conceptual model was established to explore the indicator system of attention’s measurement. The related attention data were collected from Alexa Access Statistics Tool and Katie community. Then this paper computed the correlation coefficient and regression relationship between the indicators of visual attention and cognitive attention. Thereafter this paper analyzed and discussed users’ attention behaviors and features in Internet forum. Findings: Relevant bivariate correlation analysis and regression analysis discovers that Internet forum's attention is mainly as visual attention in users’ early involvement. Attention resources can be transformed. In a deep participation, users’ cognitive attention is more significant. Meanwhile cognitive attention behaviors’ further development will lead to the phenomenon that cognitive attention input is prone to increase faster in the early duration. That means in-depth discussion and interaction are more likely to appear in the early stages of participation. Research limitations/implications: There are some limitations about this study. The indicators are not comprehensive enough because factors affecting the distribution of attention resources in Internet forums are complex. We didn’t distinguish different types of Internet forums when we collected the relevant data. Future research will focus more on how to obtain comprehensive attention data. Originality/value: T his paper

  10. Forum on orthophotography: Summary Report

    Science.gov (United States)

    ,

    1990-01-01

    A Forum on Orthophotography was held on May 15, 1990, at the National Aeronautics and Space Administration's Goddard Space Flight Center in Greenbelt, Maryland. The forum was sponsored jointly by the U.S. Soil Conservation Service, the U.S. Geological Survey, the National Governors' Association, and the National Association of Counties. The purpose of the forum was to expand the understanding and use of orthophoto products among the user community, as well as among those currently considering, or as yet unfamiliar with, the use of these products. It was also intended to provide a forum for assessing requirements for, and interest in, orthophoto products and for the identification and discussion of issues and future needs concerning orthophoto use and coordination. The 1-day forum was organized into three major sessions that focussed on technical aspects, user applications, and management issues. The first session presented a brief background and overview of the technical characteristics of standard and digital orthophotos. The second session included formal presentations by Federal, State, and county government agencies on their current and planned applications of orthophoto products, with particular emphasis on their use within geographic information systems. In the third session, private industry addressed their community's interest, capabilities, and potential role. This session also included a proposal by the U.S. Soil Conservation Service for a national cooperative program for the production of l:12,000-scale orthophotoquad products. In addition to the formal presentations, the forum provided a time for open discussion in which attendees had an opportunity to exchange information and make statements about their needs or other items pertinent to the production and dissemination of orthophoto products. Several agency orthophoto product exhibits and interactive demonstrations were also available throughout the day. This report includes a forum agenda and

  11. Lighting detectives forum

    DEFF Research Database (Denmark)

    Bülow, Katja; Skindbjerg Kristensen, Lisbeth

    2003-01-01

    Belysning for boligområder var emnet for lighting detectives forum, der blev afholdt i Stockholm i august 2003.......Belysning for boligområder var emnet for lighting detectives forum, der blev afholdt i Stockholm i august 2003....

  12. EHF SATCOM system design

    Science.gov (United States)

    Ahmed, M. Jamil

    Future satellite systems will differ considerably from the current versions. The impetus for change is a result of the need for more capacity, wider bandwidth requirements for enhanced services, increasing demand for mobile communications, advances in technology, developments in satellite payload systems, and a demand for secure military communications. To a large extent all of these needs can be satisfied by the use of extremely high frequency satellite communication (EHF Satcom) systems. EHF Satcom system design, features, pros and cons of using the system, particularly for military applications, and the current status of EHF SATCOM in Canada, U.S., Europe, and Japan are examined. The demand for bandwidth will continue to increase due to the growth of communication as well as due to enhanced services for business and entertainment. The increased bandwidth needs will be met by operating at higher frequencies, and perhaps by using extremely high frequency/superhigh frequency (EHF/SHF) satellites. Design of such systems involves a consideration of numerous aspects of design, technology, cost, and services. Advances in technology will make EHF/SHF systems feasible for military applications, as well as commercial mobile terminals, and high data rate terminals. The use of higher frequencies and small antennas will aid mobile communications. On-board processing will be akin to putting a switch in the space, providing flexibility of rates, connectivity, and services.

  13. 75 FR 54221 - Government/Industry Aeronautical Charting Forum Meeting

    Science.gov (United States)

    2010-09-03

    ... Aeronautical Charting Forum Meeting AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of... Administration (FAA) Aeronautical Charting Forum (ACF) to discuss informational content and design of... the FAA Aeronautical Charting Forum to be held from October 26 through October 28, 2010, from 8:30 a.m...

  14. 75 FR 11225 - Government/Industry Aeronautical Charting Forum Meeting

    Science.gov (United States)

    2010-03-10

    ... Federal Aviation Administration Government/Industry Aeronautical Charting Forum Meeting AGENCY: Federal... Forum (ACF 10-01) to discuss informational content and design of aeronautical charts and related.... App. II), notice is hereby given of a meeting of the FAA Aeronautical Charting Forum to be held from...

  15. 75 FR 82428 - VASRD Improvement Forum-Updating Disability Criteria for the Genitourinary System, Digestive...

    Science.gov (United States)

    2010-12-30

    ... System, Dental Conditions, and Infectious Diseases, Immune Disorders and Nutritional Deficiencies AGENCY... System, Digestive System, Dental Conditions, and Infectious Diseases, Immune Disorders and Nutritional... update the sections of the VASRD that pertain to the following four body systems: (1) Infectious Diseases...

  16. Systems engineering agile design methodologies

    CERN Document Server

    Crowder, James A

    2013-01-01

    This book examines the paradigm of the engineering design process. The authors discuss agile systems and engineering design. The book captures the entire design process (functionbases), context, and requirements to affect real reuse. It provides a methodology for an engineering design process foundation for modern and future systems design. This book captures design patterns with context for actual Systems Engineering Design Reuse and contains a new paradigm in Design Knowledge Management.

  17. Multicriteria Analysis: Managing Complexity in Selecting a Student-Information System. AIR 1988 Annual Forum Paper.

    Science.gov (United States)

    Blanchard, William; And Others

    Seattle University recently decided to replace three separate, computerized student-information systems with a single, integrated system. The complexity of this decision was managed with a multicriteria method that was used to evaluate alternative systems. The method took into account the many and sometimes conflicting concerns of the people who…

  18. Embedded systems specification and design languages

    CERN Document Server

    Villar, Eugenio

    2008-01-01

    This book is the latest contribution to the Chip Design Languages series and it consists of selected papers presented at the Forum on Specifications and Design Languages (FDL'07), in September 2007. The book represents the state-of-the-art in research and practice, and it identifies new research directions. It highlights the role of specification and modelling languages, and presents practical experiences with specification and modelling languages.

  19. Language Teaching and Technology Forum: The Integration of a Student Response System in Flipped Classrooms

    Science.gov (United States)

    Hung, Hsiu-Ting

    2017-01-01

    The present study incorporates a student response system (SRS) as a means to engage students in a flipped classroom and promote active learning. While the effectiveness of such systems with regard to student learning has been well documented in disciplines that are dominated by lecture-based instruction, no studies have compared the effectiveness…

  20. Using Structured e-Forum to Support the Legislation Formation Process

    Science.gov (United States)

    Xenakis, Alexandros; Loukis, Euripides

    Many public policy problems are 'wicked', being characterised by high complexity, many heterogeneous views and conflicts among various stakeholders, and also lack of mathematically 'optimal' solutions and predefined algorithms for calculating them. The best approach for addressing such problems is through consultation and argumentation among stakeholders. The e-participation research has investigated and suggested several ICT tools for this purpose, such as e-forum, e-petition and e-community tools. This paper investigates the use of an advanced ICT tool, the structured e-forum, for addressing such wicked problems associated with the legislation formation. For this purpose we designed, implemented and evaluated two pilot e-consultations on legislation under formation in the Parliaments of Austria and Greece using a structured e-forum tool based on the Issue Based Information Systems (IBIS) framework. The conclusions drawn reveal the advantages offered by the structured e-forum, but also its difficulties as well.

  1. LLW Forum meeting report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-08-01

    This report summarizes the Low-Level Radioactive Waste Forum (LLW Forum) meeting on May 29 through May 31, 1996.The LLW Forum is an association of state and compact representatives, appointed by governors and compact commissions, established to facilitate state and compact implementation of the Low-Level Waste Policy Act of 1980 and the Low-Level Radioactive Waste Policy Amendments Act of 1985 and to promote the objectives of low-level radioactive waste regional compacts. The LLW forum provides an opportunity for state and compact officials to share information with one another and to exchange views with officials of federal agencies and other interested parties.

  2. Intelligent Tutoring Systems as Design.

    Science.gov (United States)

    Wu, Albert K. W.; Lee, M. C.

    1998-01-01

    Proposes the notion of intelligent tutoring systems (ITS) as design in order to engage ITS development with more rigor. Topics include engineering design versus ITS design; systems approach; design as problem solving; a hierarchy of paradigms; the emergence of an agent-theoretic approach; and the need for an ITS design notation. (Author/LRW)

  3. International Space Agency CIO Forum Industrial Control System (ICS) and Cyber

    Science.gov (United States)

    Powell, Robert

    2017-01-01

    This briefing covers Industrial Control System (ICS) best practices for enhancing cyber protection. The briefing provides a very high-level overview of best practices currently being pursued by NASA as well as by other US government agencies such as NIST and DHS ICS-CERT. All information presented in this slide deck is publicly available and no sensitive information is provided in these slides. These slides will be used to generate discussion around best practices within the international community in the area of ICS cyber protections.

  4. A Framework for Systemic Design

    Directory of Open Access Journals (Sweden)

    Alex Ryan

    2014-12-01

    Full Text Available As designers move upstream from traditional product and service design to engage with challenges characterised by complexity, uniqueness, value conflict, and ambiguity over objectives, they have increasingly integrated systems approaches into their practice. This synthesis of systems thinking with design thinking is forming a distinct new field of systemic design. This paper presents a framework for systemic design as a mindset, methodology, and set of methods that together enable teams to learn, innovate, and adapt to a complex and dynamic environment. We suggest that a systemic design mindset is inquiring, open, integrative, collaborative, and centred. We propose a systemic design methodology composed of six main activities: framing, formulating, generating, reflecting, inquiring, and facilitating. We view systemic design methods as a flexible and open-ended set of procedures for facilitating group collaboration that are both systemic and designerly.  

  5. Truck industry forum material.

    Science.gov (United States)

    2017-03-01

    The following PowerPoint presentation is the draft version of the presentation that would be used for : the upcoming half-day Infrastructure-Friendlier Trucks Forum tentatively scheduled for Friday, : March 13, 2015. This forum presented a project st...

  6. Issues in holistic system design

    DEFF Research Database (Denmark)

    Lawall, Julia L.; Probst, Christian W.; Schultz, Ulrik Pagh

    2006-01-01

    The coordination of layers in computer and software systems is one of the main challenges in designing such systems today. In this paper we consider Holistic System Design as a way of integrating requirements and facilities of different system layers. We also discuss some of the challenges...... that this kind of system design poses for computer science in general as well as programming languages and operating systems in particular....

  7. DESIGNING INFORMATION SYSTEM IN ORGANIZATION

    Directory of Open Access Journals (Sweden)

    Joanna WALASEK

    2015-06-01

    Full Text Available This article is an attempt to approach essential issues in designing modern information systems. The key to successful information system is good design. A modern design requires looking from a number of different perspectives. Different people use different information in different contexts. These problems should be analyzed and requirements should be documented before solutions are designed and implemented. Satisfying the business needs is a baseline standard for information system.

  8. Preliminary design review: Brayton Isotope Power System

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1977-03-01

    The design aspects covered include flight system design, design criteria/margins/reliability, GDS design, system analysis, materials, system assembly procedure, and government furnished equipment-BTPS. (TFD)

  9. Computer System Design System-on-Chip

    CERN Document Server

    Flynn, Michael J

    2011-01-01

    The next generation of computer system designers will be less concerned about details of processors and memories, and more concerned about the elements of a system tailored to particular applications. These designers will have a fundamental knowledge of processors and other elements in the system, but the success of their design will depend on the skills in making system-level tradeoffs that optimize the cost, performance and other attributes to meet application requirements. This book provides a new treatment of computer system design, particularly for System-on-Chip (SOC), which addresses th

  10. NHS Future Forum

    Science.gov (United States)

    2012-01-01

    Professor Steve Field led the Future Forum listening exercise during the pause in the progress of the Health and Social Care bill earlier this year. The Forum made a number of recommendations which led to significant amendments to the bill. Following this successful method of engagement, the Prime Minister David Cameron asked Professor Field to lead a second phase of the Forum looking at four new workstreams. The conclusions from three of the workstreams will inform the development of specific pieces of government policy, and in the case of the integration workstream consider wider issues about joined up care. PMID:26265942

  11. Embedded Systems Design: Optimization Challenges

    DEFF Research Database (Denmark)

    Pop, Paul

    2005-01-01

    -to-market, and reduce development and manufacturing costs. In this paper, the author introduces several embedded systems design problems, and shows how they can be formulated as optimization problems. Solving such challenging design optimization problems are the key to the success of the embedded systems design...... of designing such systems is becoming increasingly important and difficult at the same time. New automated design optimization techniques are needed, which are able to: successfully manage the complexity of embedded systems, meet the constraints imposed by the application domain, shorten the time...

  12. System Design for Telecommunication Gateways

    CERN Document Server

    Bachmutsky, Alexander

    2010-01-01

    System Design for Telecommunication Gateways provides a thorough review of designing telecommunication network equipment based on the latest hardware designs and software methods available on the market. Focusing on high-end efficient designs that challenge all aspects of the system architecture, this book helps readers to understand a broader view of the system design, analyze all its most critical components, and select the parts that best fit a particular application. In many cases new technology trends, potential future developments, system flexibility and capability extensions are outline

  13. Improving immunogenicity, efficacy and safety of vaccines through innovation in clinical assay development and trial design: the Phacilitate Vaccine Forum, Washington D.C. 2011.

    Science.gov (United States)

    Moldovan, Ioana R; Tary-Lehmann, Magdalena

    2011-06-01

    The 9th Annual Vaccine Forum organized by Phacilitate in Washington D.C. 2011 brought together 50+ senior level speakers and over 400 participants representing all the key stakeholders concerning vaccines. The main focus of the meeting was to define priorities in the global vaccines sector from funding to manufacturing and evaluation of vaccine efficacy. A special session was devoted to improving immunogenicity, efficacy and safety of vaccines through innovation in clinical assay development and trial design. The current regulatory approach to clinical assay specification, validation and standardization that enable more direct comparisons of efficacy between trials was illustrated by the success in meningococcal vaccine development. The industry approach to validation strategies was exemplified by a new serologic test used on the diagnostic of pneumococcal pneumonia. The application of the Animal Rule to bridge clinical and non-clinical studies in botulism has allowed significant progress in developing one of the first vaccines to seek approval under the FDA Animal Efficacy Rule. An example of pushing the boundaries in the correlation of immunological responses and efficacy points was represented by a recent cell-based influenza vaccine for which the same correlates of protection apply as for the traditional, egg-based flue vaccine. In the field of HIV phase 2b studies are underway, based on promising results obtained with some vaccine candidates. The conclusion of this session was that creativity in vaccine design and evaluation is beneficial and can lead to innovative new vaccine designs as well as to validated assays to assess vaccine efficacy.

  14. Lofar information system design

    NARCIS (Netherlands)

    Valentijn, E.; Belikov, A. N.

    2009-01-01

    The Lofar Information System is a solution for Lofar Long Term Archive that is capable to store and handle PBs of raw and processed data. The newly created information system is based on Astro-WISE - the information system for wide field astronomy. We review an adaptation of Astro-WISE for the new

  15. Engineering Forum Strategic Plan

    Science.gov (United States)

    This Strategic Plan highlights the purpose, mission, goals, and objectives of the U.S. Environmental Protection Agency (EPA) Engineering Forum (EF). It sets forth the principles that guide the EF's decision-making, helps clarify the EF's priorities, and...

  16. Obstetrics and Gynaecology Forum

    African Journals Online (AJOL)

    Obstetrics and Gynaecology Forum. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 18, No 2 (2008) >. Log in or Register to get access to full text downloads.

  17. Obstetrics and Gynaecology Forum

    African Journals Online (AJOL)

    Obstetrics and Gynaecology Forum. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 18, No 1 (2008) >. Log in or Register to get access to full text downloads.

  18. Forum on Organizing

    Science.gov (United States)

    Heller, Janet Ruth; Jenkins, Trish; Mechenbier, Mahli Xuan; Moeller, Marie

    2011-01-01

    The forum contributors draw on their personal experiences and insights to put forth ideas about how contingent faculty might improve their working conditions through various kinds of alliances. (Contains 1 note.)

  19. Microwave systems design

    CERN Document Server

    Awang, Zaiki

    2014-01-01

    The aim of this book is to serve as a design reference for students and as an up-to-date reference for researchers. It also acts as an excellent introduction for newcomers to the field and offers established rf/microwave engineers a comprehensive refresher.  The content is roughly classified into two – the first two chapters provide the necessary fundamentals, while the last three chapters focus on design and applications. Chapter 2 covers detailed treatment of transmission lines. The Smith chart is utilized in this chapter as an important tool in the synthesis of matching networks for microwave amplifiers. Chapter 3 contains an exhaustive review of microstrip circuits, culled from various references. Chapter 4 offers practical design information on solid state amplifiers, while Chapter 5 contains topics on the design of modern planar filters, some of which were seldom published previously. A set of problems at the end of each chapter provides the readers with exercises which were compiled from actual uni...

  20. Use of global context for handling noisy names in discussion texts of a homeopathy discussion forum

    Directory of Open Access Journals (Sweden)

    Mukta Majumder

    2014-03-01

    Full Text Available The task of identifying named entities from the discussion texts in Web forums faces the challenge of noisy names. As the names are often misspelled or abbreviated, the conventional techniques have failed to detect the noisy names properly. In this paper we propose a global context based framework for handling the noisy names. The framework is tested on a named entity recognition system designed to identify the names from the discussion texts in a homeopathy diagnosis discussion forum. The proposed global context-based framework is found to be effective in improving the accuracy of the named entity recognition system.

  1. 16th International Conference on Intelligent Systems Design and Applications

    CERN Document Server

    Abraham, Ajith; Gamboa, Dorabela; Novais, Paulo

    2017-01-01

    This book comprises selected papers from the 16th International Conference on Intelligent Systems Design and Applications (ISDA’16), which was held in Porto, Portugal from December 1 to16, 2016. ISDA 2016 was jointly organized by the Portugual-based Instituto Superior de Engenharia do Porto and the US-based Machine Intelligence Research Labs (MIR Labs) to serve as a forum for the dissemination of state-of-the-art research and development of intelligent systems, intelligent technologies, and applications. The papers included address a wide variety of themes ranging from theories to applications of intelligent systems and computational intelligence area and provide a valuable resource for students and researchers in academia and industry alike. .

  2. Inductive Communication System Design Summary

    Science.gov (United States)

    1978-09-01

    The report documents the experience obtained during the design and development of the Inductive Communications System used in the Morgantown People Mover. The Inductive Communications System is used to provide wayside-to-vehicle and vehicle-to-waysid...

  3. Embedded Systems Design with FPGAs

    CERN Document Server

    Pnevmatikatos, Dionisios; Sklavos, Nicolas

    2013-01-01

    This book presents methodologies for modern applications of embedded systems design, using field programmable gate array (FPGA) devices.  Coverage includes state-of-the-art research from academia and industry on a wide range of topics, including advanced electronic design automation (EDA), novel system architectures, embedded processors, arithmetic, dynamic reconfiguration and applications. Describes a variety of methodologies for modern embedded systems design;  Implements methodologies presented on FPGAs; Covers a wide variety of applications for reconfigurable embedded systems, including Bioinformatics, Communications and networking, Application acceleration, Medical solutions, Experiments for high energy physics, Astronomy, Aerospace, Biologically inspired systems and Computational fluid dynamics (CFD).

  4. Design of Distributed Voting Systems

    OpenAIRE

    Meter, Christian

    2017-01-01

    Countries like Estonia, Norway or Australia developed electronic voting systems, which could be used to realize parliamentary elections with the help of personal computers and the Internet. These systems are completely different in their design and their way to solve the same problem. In this thesis, we analyze some of the largest real-world systems, describe their building blocks and their general design to focus on possible problems in these electronic voting systems. Furthermore, we presen...

  5. Software for CCTV systems design

    Directory of Open Access Journals (Sweden)

    Adamek Milan

    2016-01-01

    Full Text Available The article is focused on the software, which is used in the design of the CCTV systems. It shows tools available online, tools for PC and mobile applications. It describes the basic components of the camera systems, their characteristics and current trends in CCTV systems. Moreover, it compares two selected software tools, their features and supported functions. In the practical part, these tools are used for the design of a CCTV system and the whole process is described in detail.

  6. Software-Design-Analyzer System

    Science.gov (United States)

    Tausworthe, Robert C.

    1991-01-01

    CRISP-90 software-design-analyzer system, update of CRISP-80, is set of computer programs constituting software tool for design and documentation of other software and supporting top-down, hierarchical, modular, structured methodologies for design and programming. Written in Microsoft QuickBasic.

  7. HYPER system design study

    Energy Technology Data Exchange (ETDEWEB)

    Park, Won S.; Han, Seok J.; Song, Tae Y. [Korea Atomic Energy Research Institute, Taejon (Korea)

    1999-04-01

    KAERI is developing ADS, named HYPER for the transmutation of nuclear waste. HYPER is designed to produce 1000 MWth with the subcriticality of 0.97. HYPER adopts a hollow cylinder type metal fuel and require 1.0GeV, 16mA proton beams. Pb-Bi is used as coolant and the inlet and outlet temperatures are 340 deg C, 510 deg C, respectively. In addition, Pb-Bi coolant is used as spallation target also. HYPER is expected to incinerate about 380 kg of TRU a year, which is corresponding to the support ratio 5 {approx} 6. 23 refs., 50 figs., 31 tabs. (Author)

  8. Fundamentals of electronic systems design

    CERN Document Server

    Lienig, Jens

    2017-01-01

    This textbook covers the design of electronic systems from the ground up, from drawing and CAD essentials to recycling requirements. Chapter by chapter, it deals with the challenges any modern system designer faces: the design process and its fundamentals, such as technical drawings and CAD, electronic system levels, assembly and packaging issues and appliance protection classes, reliability analysis, thermal management and cooling, electromagnetic compatibility (EMC), all the way to recycling requirements and environmental-friendly design principles. Enables readers to face various challenges of designing electronic systems, including coverage from various engineering disciplines; Written to be accessible to readers of varying backgrounds; Uses illustrations extensively to reinforce fundamental concepts; Organized to follow essential design process, although chapters are self-contained and can be read in any order.

  9. REC Tracking Systems Design Guide

    Energy Technology Data Exchange (ETDEWEB)

    Meredith Wingate

    2004-02-03

    OAK-B135 The Design Guide is presented in three parts. Section II describes the need for REC tracking, the two principal tracking methods available, and, in simple terms, the operation of certificate-based systems. Section III presents the major issues in the design of certificate-based tracking systems and discusses the advantages and disadvantages of alternative solutions. Finally, Section IV offers design principles or recommendations for most of these issues.

  10. Design Theory in Information Systems

    OpenAIRE

    Shirley Gregor

    2002-01-01

    The aim of this paper is to explore an important category of information systems knowledge that is termed “design theory”. This knowledge is distinguished as the fifth of five types of theory: (i) theory for analysing and describing, (ii) theory for understanding, (iii) theory for predicting, (iv) theory for explaining and predicting, and (v) theory for design and action. Examples of design theory in information systems are provided, with associated research methods. The limited understanding...

  11. Systems design for remote healthcare

    CERN Document Server

    Bonfiglio, Silvio

    2014-01-01

    This book provides a multidisciplinary overview of the design and implementation of systems for remote patient monitoring and healthcare. Readers are guided step-by-step through the components of such a system and shown how they could be integrated in a coherent framework for deployment in practice. The authors explain planning from subsystem design to complete integration and deployment, given particular application constraints. Readers will benefit from descriptions of the clinical requirements underpinning the entire application scenario, physiological parameter sensing techniques, information processing approaches and overall, application dependent system integration. Each chapter ends with a discussion of practical design challenges and two case studies are included to provide practical examples and design methods for two remote healthcare systems with different needs. ·         Provides a multi-disciplinary overview of next-generation mobile healthcare system design; ·         Includes...

  12. Reconfigurable system design and verification

    CERN Document Server

    Hsiung, Pao-Ann; Huang, Chun-Hsian

    2009-01-01

    Reconfigurable systems have pervaded nearly all fields of computation and will continue to do so for the foreseeable future. Reconfigurable System Design and Verification provides a compendium of design and verification techniques for reconfigurable systems, allowing you to quickly search for a technique and determine if it is appropriate to the task at hand. It bridges the gap between the need for reconfigurable computing education and the burgeoning development of numerous different techniques in the design and verification of reconfigurable systems in various application domains. The text e

  13. The 14. forum; Le 14. forum

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2001-09-01

    This Paris Forum is held at Hotel Meridien Etoile (81, Bd Gouvion St Cyr) from Wednesday 26 to Friday 28 September on the theme: LP Gas, a Clean Energy for Urban and Rural Use Worldwide. The exhibition opens its gates on 26 September at 1 PM. Work begins the same day at 2 PM with the Autogas seminar organised by GAIN. The conference starts on Thursday 27, at 8.45 AM for four sessions and some 30 papers, a workshop and the intervention of two keynote speakers. (authors)

  14. Modular system design and evaluation

    CERN Document Server

    Levin, Mark Sh

    2015-01-01

    This book examines seven key combinatorial engineering frameworks (composite schemes consisting of algorithms and/or interactive procedures) for hierarchical modular (composite) systems. These frameworks are based on combinatorial optimization problems (e.g., knapsack problem, multiple choice problem, assignment problem, morphological clique problem), with the author’s version of morphological design approach – Hierarchical Morphological Multicritieria Design (HMMD) – providing a conceptual lens with which to elucidate the examples discussed. This approach is based on ordinal estimates of design alternatives for systems parts/components, however, the book also puts forward an original version of HMMD that is based on new interval multiset estimates for the design alternatives with special attention paid to the aggregation of modular solutions (system versions). The second part of ‘Modular System Design and Evaluation’ provides ten information technology case studies that enriches understanding of th...

  15. Relating Systems Thinking & Design 2013. Emerging Contexts for Systemic Design

    Directory of Open Access Journals (Sweden)

    Birger Sevaldson

    2013-08-01

    Full Text Available AHO – Oslo School of Architecture & Design, Norway, invites to the Relating Systems Thinking and Design to a free and open symposium over two days 9th-11th October 2013, with a preceding full day with diverse workshops and a subsequent special issue in FORMakademisk.

  16. Launch vehicle systems design analysis

    Science.gov (United States)

    Ryan, Robert; Verderaime, V.

    1993-01-01

    Current launch vehicle design emphasis is on low life-cycle cost. This paper applies total quality management (TQM) principles to a conventional systems design analysis process to provide low-cost, high-reliability designs. Suggested TQM techniques include Steward's systems information flow matrix method, quality leverage principle, quality through robustness and function deployment, Pareto's principle, Pugh's selection and enhancement criteria, and other design process procedures. TQM quality performance at least-cost can be realized through competent concurrent engineering teams and brilliance of their technical leadership.

  17. Automated extraction system design review

    Energy Technology Data Exchange (ETDEWEB)

    Parry, H.L.; Eklund, J.D.; Halter, J.M.; Sullivan, R.G.

    1979-03-01

    The Automated Extraction System (AES) is an advanced fullface continuous mining system designed and built by National Mine Service Co. Since initial testing in a coal mine revealed operational problems, a design review was conducted. Two potential conceptual problems were identified: the roof control concept and the hydraulic sumping concept. It is felt that the combination of uneven and cyclic roof loading may promote roof failure even in bolted roof areas. Critical design problem areas include weight and balance, friction-induced excessive sumping forces, and design complexity.

  18. NASA System Engineering Design Process

    Science.gov (United States)

    Roman, Jose

    2011-01-01

    This slide presentation reviews NASA's use of systems engineering for the complete life cycle of a project. Systems engineering is a methodical, disciplined approach for the design, realization, technical management, operations, and retirement of a system. Each phase of a NASA project is terminated with a Key decision point (KDP), which is supported by major reviews.

  19. Design Theory in Information Systems

    Directory of Open Access Journals (Sweden)

    Shirley Gregor

    2002-11-01

    Full Text Available The aim of this paper is to explore an important category of information systems knowledge that is termed “design theory”. This knowledge is distinguished as the fifth of five types of theory: (i theory for analysing and describing, (ii theory for understanding, (iii theory for predicting, (iv theory for explaining and predicting, and (v theory for design and action. Examples of design theory in information systems are provided, with associated research methods. The limited understanding and recognition of this type of theory in information systems indicates that further debate concerning its nature and role in our discipline is needed.

  20. Building Problem Forums: On Troubleshooting in the Professional Writing Classroom

    Science.gov (United States)

    Vealey, Kyle P.

    2016-01-01

    This article describes the use of "problem forums" in undergraduate professional writing courses as a technique for facilitating and sustaining learning from increasingly complex, messy, and wicked problems that are characteristic of 21st-century work. Problem forums are designed to scaffold project team discussions of rhetorical,…

  1. General Systems Theory and Instructional Systems Design.

    Science.gov (United States)

    Salisbury, David F.

    1990-01-01

    Describes basic concepts in the field of general systems theory (GST) and identifies commonalities that exist between GST and instructional systems design (ISD). Models and diagrams that depict system elements in ISD are presented, and two matrices that show how GST has been used in ISD literature are included. (11 references) (LRW)

  2. Evaluation of an online medical teaching forum.

    Science.gov (United States)

    Ravindran, Rahul; Kashyap, Mavin; Lilis, Lydia; Vivekanantham, Sayinthen; Phoenix, Gokulan

    2014-07-01

    Social media is increasingly being used for teaching and assessment. We describe the design and implementation of a Facebook© teaching forum for medical students, and evaluate its effectiveness. A Facebook© teaching forum was set up in a London Hospital to assist with learning and assessment for undergraduate medical students. An independent online survey was used to collate their experiences. Accessibility to the forum, usefulness in stimulating peer-to-peer discussion and the use of weekly formative assessments were evaluated using a Likert scale. In total, 91 per cent (n=68/75) of students who had Facebook© joined the teaching forum. The majority of students completed the questionnaire (n=39/68, 57%). All students visited the teaching forum group at least once a week. A significant proportion attempted all 10 question sets (n=16/39, 41%). Students felt more comfortable asking questions in the forum than in ward rounds and clinics (n=22/39, 56%). The general consensus was that Facebook© could be used for educational purposes, with just 5 per cent of students (n=2/39) thinking that Facebook© should only be used socially and with 92 per cent believing that the forum helped to achieve the learning objectives of the curriculum (n=36/39). Facebook© provides a safe environment for learning and discussion amongst medical undergraduates undergoing their clinical attachments. Furthermore, through formative assessments set by a medical educator, it provides a useful revision tool for summative assessments and reinforces knowledge learned through conventional teaching methods. © 2014 John Wiley & Sons Ltd.

  3. Forum on Environmental Measurements (FEM)

    Science.gov (United States)

    The 2003 document Forum on Environmental Measurements (FEM or Forum) is established by the Agency's Science and Technology Policy Council (STPC) to promote consistency and consensus within EPA on measurement, monitoring, and laboratory science issues

  4. Water Finance Webinars and Forums

    Science.gov (United States)

    The Center hosts a series of water finance forums. These forums bring together communities with drinking water, wastewater, and stormwater project financing needs in an interactive peer-to-peer networking format.

  5. Water Finance Forum - New Jersey

    Science.gov (United States)

    Presentations and materials from the Regional Finance Forum, Financing Resilient and Sustainable Water Infrastructure, held in Iselin, New Jersey, on December 2, 2015. The forum was co-sponsored by EPA's Water Infrastructure and Resiliency Finance Center,

  6. Designing a Campus Signage System

    Science.gov (United States)

    Coll Univ Bus, 1969

    1969-01-01

    Explains a new system that combines architectural and graphic skills to direct, inform, and control the increasing numbers of people who attend various campus activities. Article was prepared by Interior Space Designers (ISD), Incorporated of New York. (WM)

  7. System design projects for undergraduate design education

    Science.gov (United States)

    Batill, S. M.; Pinkelman, J.

    1993-01-01

    Design education has received considerable in the recent past. This paper is intended to address one aspect of undergraduate design education and that is the selection and development of the design project for a capstone design course. Specific goals for a capstone design course are presented and their influence on the project selection are discussed. The evolution of a series of projects based upon the design of remotely piloted aircraft is presented along with students' perspective on the capstone experience.

  8. Beyond Learning Management Systems: Designing for Interprofessional Knowledge Building in the Health Sciences

    Directory of Open Access Journals (Sweden)

    Leila Lax

    2010-12-01

    Full Text Available This paper examines theoretical, pedagogical, and technological differences between two technologies that have been used in undergraduate interprofessional health sciences at the University of Toronto. One, a learning management system, WebCT 2.0, supports online coursework. The other, a Knowledge Building environment, Knowledge Forum 2.0, supports the collaborative work of knowledge-creating communities. Seventy students from six health science programs (Dentistry, Medicine, Nursing, Occupational Therapy, Pharmacy and Physical Therapy participated online in a 5-day initiative to advance understanding of core principles and professional roles in pain assessment and management. Knowledge Forum functioned well as a learning management system but to preserve comparability between the two technologies its full resources were not brought into play. In this paper we examine three distinctive affordances of Knowledge Forum that have implications for health sciences education: (1 supports for Knowledge Building discourse as distinct from standard threaded discourse; (2 integration of sociocognitive functions as distinct from an assortment of separate tools; and (3 resources for multidimensional social and cognitive assessment that go beyond common participation indicators and instructor-designed quizzes and analyses. We argue that these design characteristics have the potential to open educational pathways that traditional learning management systems leave closed.

  9. EUROSAFE forum 2016

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2016-07-01

    The proceedings of the Eurosafe forum 2016 includes contributions to the following issues: Seminar 1: nuclear installation safety - assessment; Seminar 2: Nuclear installation safety - research; Seminar 3: Waste management and decommissioning - dismantling; Seminar 4: radiation protection, environment and emergency preparedness; Seminar 5: security of nuclear installations and materials.

  10. Forum; Het ideale vrijetijdslandschap

    NARCIS (Netherlands)

    Peters, K.B.M.; Embregts, M.

    2009-01-01

    Het Kenniscentrum Recreatie is in 2009 gestart met een debat getiteld 'Het ideale vrijetijdslandschap'. Doel van dit debat is inzicht te krijgen in zowel de wensen als de realisatie van het ideale Nederlandse vrijetijdslandschap. In dit Forum wordt aandacht besteedt aan dit debat. De eerste bijdrage

  11. Forestry: Forum summary

    Science.gov (United States)

    Whitmore, R.

    1981-01-01

    A synopsis of a forum addressing the use of LANDSAT data in forestry is given. Broad inventory studies, clear-cut monitoring, and insect and disease detection were among the subject areas discussed. Concerns regarding the vailability of data, cloud cover, resolution and classification accuracy, and product format were expressed by foresters.

  12. 2012 National Leadership Forum

    Science.gov (United States)

    Magnuson, Peter

    2012-01-01

    Two key themes emerged from the 2012 National Leadership Forum: Taking Business to School, which was hosted by the Career and Technical Education Foundation at the end of May. The first was that employers are looking for a workforce that is technologically savvy while having leadership and employability skills. The second is that the business…

  13. Towards Global Transdisciplinary Research: Lessons Learned from the Belmont Forum

    Science.gov (United States)

    Paillard, S. J.; Uhle, M. E.; van Jaarsveld, A. S.; Monfray, P.

    2014-12-01

    The Belmont Forum was initiated in 2009 by a sub group of the International Group of Funding Agencies for Global Change Research. The Belmont Challenge embodies the Forum's central goal: to deliver knowledge needed for societies to take action to mitigate and adapt to detrimental environmental change. This is fostered through collaboration among scientists across the globe and by stressing the importance of co-production of knowledge associated with coupled natural and social systems. The Belmont Challenge was clearly aligned with other collective thinking processes within the research community and key knowledge users from intergovernmental bodies. Convergence of these efforts gave rise to the S&T Alliance for Global Sustainability and its initiative - Future Earth. Collaborative Research Actions, consisting primarily of multilateral research calls to address topics relevant to Future Earth, have been the main tool developed to address the Belmont Challenge and some early lessons emerged. First, obstacles faced by the Belmont Forum are similar to those met by scientists collaborating across traditional boundaries. Building shared languages and interests between various disciplines and across global cultures, remains difficult; this results in a persistent underestimation of the transformation required to move knowledge creation towards a truly global inter- and transdisciplinary science. Second, the diversity of organizations, cultures and practices within the Belmont Forum is the main source of its creativity and its challenges. While some convergence is needed to build coherent strategies and work efficiently together, diversity is necessary to design actions suitable for all partners regardless of their national research system and science-policy priorities. Finding the right trade-offs is a learning process that Future Earth is also facing; thus both initiatives are not only linked through funding relations but also through strongly intertwined learning curves.

  14. Proceedings of the Flat-Plate Solar Array Project Research Forum on the Design of Flat-Plate Photovoltaic Arrays for Central Stations

    Science.gov (United States)

    1983-01-01

    The Flat Plate Solar Array Project, focuses on advancing technologies relevant to the design and construction of megawatt level central station systems. Photovoltaic modules and arrays for flat plate central station or other large scale electric power production facilities require the establishment of a technical base that resolves design issues and results in practical and cost effective configurations. Design, qualification and maintenance issues related to central station arrays derived from the engineering and operating experiences of early applications and parallel laboratory reserch activities are investigated. Technical issues are examined from the viewpoint of the utility engineer, architect/engineer and laboratory researcher. Topics on optimum source circuit designs, module insulation design for high system voltages, array safety, structural interface design, measurements, and array operation and maintenance are discussed.

  15. Facilitating Learning Spaces in Forum Theatre

    Science.gov (United States)

    Rae, Jan

    2013-01-01

    Purpose: The purpose of this paper is to evaluate the extent to which forum theatre interventions can support non-hierarchical approaches to learning, development and change management initiatives in organisations. Design/methodology/approach: Semi-structured interviews were carried out with theatre consultancies, actors/facilitators,…

  16. Car driver training and licensing systems in Europe : report prepared by members of Forum of European Road Safety Research Institutes FERSI and supported by European Commission Transport Directorate, DG VII.

    NARCIS (Netherlands)

    Lynam, D. & Twisk, D.A.M.

    1995-01-01

    This report describes a survey of car driver training and licensing systems in European countries, undertaken by the Forum of European Road Safety Research Institutes (FERSI) supported by the Transport Directorate of the European Union. A literature review and collation of general information on

  17. Nordic Nuclear Materials Forum for Generation IV Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Anghel, C. (Studsvik Nuclear AB, Nykoeping (Sweden)); Penttilae, S. (Technical Research Centre of Finland, VTT (Finland))

    2010-03-15

    A network for material issues for Generation IV nuclear power has been initiated within the Nordic countries. The objectives of the Generation IV Nordic Nuclear Materials Forum (NOMAGE4) are to put the basis of a sustainable forum for Gen IV issues, especially focussing on fuels, cladding, structural materials and coolant interaction. Other issues include reactor physics, dynamics and diagnostics, core and fuel design. The present report summarizes the work performed during the year 2009. The efforts made include identification of organisations involved in Gen IV issues in the Nordic countries, update of the forum website, http://www.studsvik.se/GenerationIV, and investigation of capabilities for research within the area of Gen IV. Within the NOMAGE4 project a seminar on Generation IV Nuclear Energy Systems has been organized during 15-16th of October 2009. The aim of the seminar was to provide a forum for exchange of information, discussion on future research needs and networking of experts on Generation IV reactor concepts. As an outcome of the NOMAGE4, a few collaboration project proposals have been prepared/planned in 2009. The network was welcomed by the European Commission and was mentioned as an exemplary network with representatives from industries, universities, power companies and research institutes. NOMAGE4 has been invited to participate to the 'European Energy Research Alliance, EERA, workshop for nuclear structural materials' http://www.eera-set.eu/index.php?index=41 as external observers. Future plans include a new Nordic application for continuation of NOMAGE4 network. (author)

  18. Networking systems design and development

    CERN Document Server

    Chao, Lee

    2009-01-01

    Effectively integrating theory and hands-on practice, Networking Systems Design and Development provides students and IT professionals with the knowledge and skills needed to design, implement, and manage fully functioning network systems using readily available Linux networking tools. Recognizing that most students are beginners in the field of networking, the text provides step-by-step instruction for setting up a virtual lab environment at home. Grounded in real-world applications, this book provides the ideal blend of conceptual instruction and lab work to give students and IT professional

  19. Members of the Forum Engelberg visit CERN

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    The Forum Engelberg is an annual interdisciplinary conference held in Engelberg, Switzerland intended to act as an international platform for debate and exchange of views on key issues affecting scientific research, technology, economics and philosophy. Its President is Hubert Curien - former French Minister of Research and Space Research, and President of the CERN Council from 1994 to 1996. Photo 01: Raymond Battistella - Director-General of SIG, Geneva's utilities provider (left) - and Bernard Ecoffey, Founder of the Forum Engelberg. In the background is the CMS magnet system under construction. The red concentric rings are part of the barrel yoke, which returns the magnetic flux generated by the superconducting coil. Supported from the innermost barrel ring is the outer cylinder of the vacuum tank that will house the superconducting coil. Photo 02: Alexander Höchli, member of the Institutional Committee of Forum Engelberg and former Landammann of the canton of Obwalden (left), with Raymond Battistella, Di...

  20. Requirements analysis and system design

    CERN Document Server

    Maciaszek, Leszek A

    2007-01-01

    An examination of the methods and techniques used in the analysis and design phases of Information System development. Emphasis is placed upon the application of object technology in enterprise information systems (EIS) with UML being used throughout. Through its excellent balance of practical explanation and theoretical insight the book manages to avoid unnecessary, complicating details without sacrificing rigor. Examples of real-world scenarios are used throughout, giving the reader an understanding of what really goes on within the field of Software Engineering.

  1. Forum Discos y Libros

    OpenAIRE

    2010-01-01

    En este documento se encuentra el caso de la compañía Forum Discos y Libros. El aumento de la piratería y los dinámicos avances tecnológicos, impulsan a los empresarios del sector musical y librero a realizar cambios continuos en sus modelos de negocio y diversificar su portafolio de productos y/o servicios.

  2. Fatigue Criterion for System Design

    Science.gov (United States)

    Zeretsky, E. V.

    1986-01-01

    Report discusses principles of structural-life prediction. Generalized methodology developed for structural life prediction, design, and reliability, based upon fatigue criterion. Approach incorporates computed life of elemental stress volumes of complex machine elements to predict system life. Results of coupon fatigue testing incorporated into analysis, allowing for life prediction and component or structural renewal rates, with reasonable statistical certainty.

  3. Design of interpretable fuzzy systems

    CERN Document Server

    Cpałka, Krzysztof

    2017-01-01

    This book shows that the term “interpretability” goes far beyond the concept of readability of a fuzzy set and fuzzy rules. It focuses on novel and precise operators of aggregation, inference, and defuzzification leading to flexible Mamdani-type and logical-type systems that can achieve the required accuracy using a less complex rule base. The individual chapters describe various aspects of interpretability, including appropriate selection of the structure of a fuzzy system, focusing on improving the interpretability of fuzzy systems designed using both gradient-learning and evolutionary algorithms. It also demonstrates how to eliminate various system components, such as inputs, rules and fuzzy sets, whose reduction does not adversely affect system accuracy. It illustrates the performance of the developed algorithms and methods with commonly used benchmarks. The book provides valuable tools for possible applications in many fields including expert systems, automatic control and robotics.

  4. Consistent Design of Dependable Control Systems

    DEFF Research Database (Denmark)

    Blanke, M.

    1996-01-01

    Design of fault handling in control systems is discussed, and a method for consistent design is presented.......Design of fault handling in control systems is discussed, and a method for consistent design is presented....

  5. Microminiature inertial measurement system design

    Science.gov (United States)

    Mao, Gang; Gu, Qitai

    2000-05-01

    The microminiature inertial measurement system, a new style of the inertial measurement system, has many advantages compared with the traditional one, such as small size, light weight, low cost, little power consumption, high bearing capacity and long life. Undoubtedly, it will have wider applications in military and commercial fields. However, it is a pity that current micro inertial sensors do not have enough accuracy. Therefore, its applications were limited to some extent. This paper described a design of microminiature inertial measurement system and its composing and operating theory. In addition, its performance and applications were evaluated.

  6. Identifiable piezoelectric security system design

    Science.gov (United States)

    Li, Zhenyu; Zhang, Xiaoming

    2017-10-01

    Directing at the disadvantages of low environmental suitability, inferior anti-interference ability and being easy to be found and destroyed in existing security product, a kind of identifiable piezoelectric security system based on piezoelectric cable is designed. The present system gathers vibration signals of different moving bodies, such as human, vehicles, animals and so on, with piezoelectric cable buried under -ground and distinguishes the different moving bodies through recognition algorithm and thus giving an alarm. As is shown in experiments, the present system has the features of good concealment and high accuracy in distinguishing moving bodies.

  7. Engineering Design Information System (EDIS)

    Energy Technology Data Exchange (ETDEWEB)

    Smith, P.S.; Short, R.D.; Schwarz, R.K.

    1990-11-01

    This manual is a guide to the use of the Engineering Design Information System (EDIS) Phase I. The system runs on the Martin Marietta Energy Systems, Inc., IBM 3081 unclassified computer. This is the first phase in the implementation of EDIS, which is an index, storage, and retrieval system for engineering documents produced at various plants and laboratories operated by Energy Systems for the Department of Energy. This manual presents on overview of EDIS, describing the system's purpose; the functions it performs; hardware, software, and security requirements; and help and error functions. This manual describes how to access EDIS and how to operate system functions using Database 2 (DB2), Time Sharing Option (TSO), Interactive System Productivity Facility (ISPF), and Soft Master viewing features employed by this system. Appendix A contains a description of the Soft Master viewing capabilities provided through the EDIS View function. Appendix B provides examples of the system error screens and help screens for valid codes used for screen entry. Appendix C contains a dictionary of data elements and descriptions.

  8. Telecommunications Systems Design Techniques Handbook

    Science.gov (United States)

    Edelson, R. E. (Editor)

    1972-01-01

    The Deep Space Network (DSN) increasingly supports deep space missions sponsored and managed by organizations without long experience in DSN design and operation. The document is intended as a textbook for those DSN users inexperienced in the design and specification of a DSN-compatible spacecraft telecommunications system. For experienced DSN users, the document provides a reference source of telecommunication information which summarizes knowledge previously available only in a multitude of sources. Extensive references are quoted for those who wish to explore specific areas more deeply.

  9. ARGOS laser system mechanical design

    Science.gov (United States)

    Deysenroth, M.; Honsberg, M.; Gemperlein, H.; Ziegleder, J.; Raab, W.; Rabien, S.; Barl, L.; Gässler, W.; Borelli, J. L.

    2014-07-01

    ARGOS, a multi-star adaptive optics system is designed for the wide-field imager and multi-object spectrograph LUCI on the LBT (Large Binocular Telescope). Based on Rayleigh scattering the laser constellation images 3 artificial stars (at 532 nm) per each of the 2 eyes of the LBT, focused at a height of 12 km (Ground Layer Adaptive Optics). The stars are nominally positioned on a circle 2' in radius, but each star can be moved by up to 0.5' in any direction. For all of these needs are following main subsystems necessary: 1. A laser system with its 3 Lasers (Nd:YAG ~18W each) for delivering strong collimated light as for LGS indispensable. 2. The Launch system to project 3 beams per main mirror as a 40 cm telescope to the sky. 3. The Wave Front Sensor with a dichroic mirror. 4. The dichroic mirror unit to grab and interpret the data. 5. A Calibration Unit to adjust the system independently also during day time. 6. Racks + platforms for the WFS units. 7. Platforms and ladders for a secure access. This paper should mainly demonstrate how the ARGOS Laser System is configured and designed to support all other systems.

  10. 76 FR 17658 - National Forum for State and Territorial Chief Executives (National Forum) Program Cooperative...

    Science.gov (United States)

    2011-03-30

    ... HUMAN SERVICES Health Resources and Services Administration National Forum for State and Territorial Chief Executives (National Forum) Program Cooperative Agreement AGENCY: Health Resources and Services... Forum for State and Territorial Chief Executives (National Forum) Program Cooperative Agreement. SUMMARY...

  11. Reactor Design for Bioelectrochemical Systems

    KAUST Repository

    Mohanakrishna, G.

    2017-12-01

    Bioelectrochemical systems (BES) are novel hybrid systems which are designed to generate renewable energy from the low cost substrate in a sustainable way. Microbial fuel cells (MFCs) are the well studied application of BES systems that generate electricity from the wide variety of organic components and wastewaters. MFC mechanism deals with the microbial oxidation of organic molecules for the production of electrons and protons. The MFC design helps to build the electrochemical gradient on anode and cathode which leads for the bioelectricity generation. As whole reactions of MFCs happen at mild environmental and operating conditions and using waste organics as the substrate, it is defined as the sustainable and alternative option for global energy needs and attracted worldwide researchers into this research area. Apart from MFC, BES has other applications such as microbial electrolysis cells (MECs) for biohydrogen production, microbial desalinations cells (MDCs) for water desalination, and microbial electrosynthesis cells (MEC) for value added products formation. All these applications are designed to perform efficiently under mild operational conditions. Specific strains of bacteria or specifically enriched microbial consortia are acting as the biocatalyst for the oxidation and reduction of BES. Detailed function of the biocatalyst has been discussed in the other chapters of this book.

  12. Distributed Persistent Identifiers System Design

    Directory of Open Access Journals (Sweden)

    Pavel Golodoniuc

    2017-06-01

    Full Text Available The need to identify both digital and physical objects is ubiquitous in our society. Past and present persistent identifier (PID systems, of which there is a great variety in terms of technical and social implementation, have evolved with the advent of the Internet, which has allowed for globally unique and globally resolvable identifiers. PID systems have, by in large, catered for identifier uniqueness, integrity, and persistence, regardless of the identifier’s application domain. Trustworthiness of these systems has been measured by the criteria first defined by Bütikofer (2009 and further elaborated by Golodoniuc 'et al'. (2016 and Car 'et al'. (2017. Since many PID systems have been largely conceived and developed by a single organisation they faced challenges for widespread adoption and, most importantly, the ability to survive change of technology. We believe that a cause of PID systems that were once successful fading away is the centralisation of support infrastructure – both organisational and computing and data storage systems. In this paper, we propose a PID system design that implements the pillars of a trustworthy system – ensuring identifiers’ independence of any particular technology or organisation, implementation of core PID system functions, separation from data delivery, and enabling the system to adapt for future change. We propose decentralisation at all levels — persistent identifiers and information objects registration, resolution, and data delivery — using Distributed Hash Tables and traditional peer-to-peer networks with information replication and caching mechanisms, thus eliminating the need for a central PID data store. This will increase overall system fault tolerance thus ensuring its trustworthiness. We also discuss important aspects of the distributed system’s governance, such as the notion of the authoritative source and data integrity

  13. Forum-ing: Signature practice for public theological discourse ...

    African Journals Online (AJOL)

    The forum meets every Monday morning, except when there is a national holiday. It has operated 30 consecutive years. The forum has a series of presentations, including the opening prayer, self-introductions of each person, a report of the executive director, special presentations from selected community groups, reports, ...

  14. Forum-ing: Signature practice for public theological discourse

    African Journals Online (AJOL)

    2014-05-14

    May 14, 2014 ... victimised in Atlanta, Georgia in the United States of America in the early 1980s. It was originally organised to respond to the economic, financial, spiritual, emotional, employment, housing and resource needs of the underserved poor. This unique practice is called forum- ing. The forum meets every Monday ...

  15. Grid Based Chinese Virtual Observatory System Design

    Science.gov (United States)

    Cui, Chenzhou; Zhao, Yongheng

    Chinese Virtual Observatory (China-VO) project is a consortium initiated by Chinese National Astronomical Observatory and Large Sky Area Multi-Object Fiber Spectroscopic Telescope project. A three-layer architecture of the China-VO is described which depends upon the Open Grid Services Architecture being developed by the Global Grid Forum. The fabric layer mainly consists of astronomical datasets with corresponding metadate and data access services. The resource layer includes a large scale of services for grid resource management data interoperation data mining security logical name space and so on. The application layer consists of user interfaces and other client services. In the China-VO system all the functional components are SOAP Grid service implementations. Chinese National Grid (CNGrid) will be the testbed for the China-VO. How to interact with other CNGrid components is also discussed.

  16. Obstetrics and Gynaecology Forum: Submissions

    African Journals Online (AJOL)

    Author Guidelines. Material submitted for publication in the O & G Forum is accepted on condition that it meets the requirements of the editors. The management reserves the copyright of the material published. All authors must give consent to publication, and the O & G Forum does not hold itself responsible for statements ...

  17. Developers@CERN Forums: Python

    CERN Multimedia

    CERN. Geneva

    2016-01-01

    The Developers@CERN Forums second edition took place at the end of May on the topic of Python. How do developers at CERN interact with Python? Which cutting-edge projects are using Python? What were the highlights of this most recent forum?

  18. EUFOREA Rhinology Research Forum 2016

    DEFF Research Database (Denmark)

    Hellings, P W; Akdis, C A; Bachert, C

    2017-01-01

    The first European Rhinology Research Forum organized by the European Forum for Research and Education in Allergy and Airway Diseases (EUFOREA) was held in the Royal Academy of Medicine in Brussels on 17th and 18th November 2016, in collaboration with the European Rhinologic Society (ERS) and the...

  19. A CONCEPT OF SOLAR TRACKER SYSTEM DESIGN

    OpenAIRE

    Meita Rumbayan *, Muhamad Dwisnanto Putro

    2017-01-01

    Improvement of solar panel efficiency is an ongoing research work recently. Maximizing the output power by integrating with the solar tracker system becomes a interest point of the research. This paper presents the concept in designing a solar tracker system applied to solar panel. The development of solar panel tracker system design that consist of system display prototype design, hardware design, and algorithm design. This concept is useful as the control system for solar tracker to improve...

  20. Computerized Adaptive Testing System Design: Preliminary Design Considerations.

    Science.gov (United States)

    Croll, Paul R.

    A functional design model for a computerized adaptive testing (CAT) system was developed and presented through a series of hierarchy plus input-process-output (HIPO) diagrams. System functions were translated into system structure: specifically, into 34 software components. Implementation of the design in a physical system was addressed through…

  1. The International Technical Safety Forum

    CERN Multimedia

    CERN Bulletin

    2010-01-01

    The International Technical Safety Forum is a meeting of safety experts from several physics labs in Europe and the US. Since 1998 participants have been meeting every couple of years to discuss common challenges in safety matters. The Forum helps them define best practices and learn from the important lessons learned by others.   The Forum's participants in front of building 40. This year, the meeting took place at CERN from 12 to 16 April. “This year's meeting covered subjects ranging from communication and training in matters of safety, to cryogenic safety, emergency preparedness and risk analysis”, explains Ralf Trant, head of the CERN Safety Commission and organiser of this year’s Forum. Radiation protection issues are not discussed at the meeting since they involve different expertise. The goal of the Forum is to allow participants to share experience, learn lessons and acquire specific knowledge in a very open way. Round-table discussions, dedicated time for ...

  2. Can anonymous posters on medical forums be reidentified?

    Science.gov (United States)

    Bobicev, Victoria; Sokolova, Marina; El Emam, Khaled; Jafer, Yasser; Dewar, Brian; Jonker, Elizabeth; Matwin, Stan

    2013-10-03

    Participants in medical forums often reveal personal health information about themselves in their online postings. To feel comfortable revealing sensitive personal health information, some participants may hide their identity by posting anonymously. They can do this by using fake identities, nicknames, or pseudonyms that cannot readily be traced back to them. However, individual writing styles have unique features and it may be possible to determine the true identity of an anonymous user through author attribution analysis. Although there has been previous work on the authorship attribution problem, there has been a dearth of research on automated authorship attribution on medical forums. The focus of the paper is to demonstrate that character-based author attribution works better than word-based methods in medical forums. The goal was to build a system that accurately attributes authorship of messages posted on medical forums. The Authorship Attributor system uses text analysis techniques to crawl medical forums and automatically correlate messages written by the same authors. Authorship Attributor processes unstructured texts regardless of the document type, context, and content. The messages were labeled by nicknames of the forum participants. We evaluated the system's performance through its accuracy on 6000 messages gathered from 2 medical forums on an in vitro fertilization (IVF) support website. Given 2 lists of candidate authors (30 and 50 candidates, respectively), we obtained an F score accuracy in detecting authors of 75% to 80% on messages containing 100 to 150 words on average, and 97.9% on longer messages containing at least 300 words. Authorship can be successfully detected in short free-form messages posted on medical forums. This raises a concern about the meaningfulness of anonymous posting on such medical forums. Authorship attribution tools can be used to warn consumers wishing to post anonymously about the likelihood of their identity being

  3. Fermilab Recycler Collimation System Design

    Energy Technology Data Exchange (ETDEWEB)

    Brown, B. C. [Fermilab; Adamson, P. [Fermilab; Ainsworth, R. [Fermilab; Capista, D. [Fermilab; Hazelwood, K. [Fermilab; Kourbanis, I. [Fermilab; Mokhov, N. V. [Fermilab; Morris, D. K. [Fermilab; Murphy, M. [Fermilab; Sidorov, V. [Fermilab; Stern, E. [Fermilab; Tropin, I. [Fermilab; Yang, M-J. [Fermilab

    2016-10-04

    To provide 700 kW proton beams for neutrino production in the NuMI facility, we employ slip stacking in the Recycler with transfer to the Main Injector for recapture and acceleration. Slip stacking with 12 Booster batches per 1.33 sec cycle of the Main Injector has been implemented and briefly tested while extensive operation with 8 batches and 10 batches per MI cycle has been demonstrated. Operation in this mode since 2013 shows that loss localization is an essential component for long term operation. Beam loss in the Recycler will be localized in a collimation region with design capability for absorbing up to 2 kW of lost protons in a pair of 20-Ton collimators (absorbers). This system will employ a two stage collimation with a thin molybdenum scattering foil to define the bottom edge of both the injected and decelerated-for-slipping beams. Optimization and engineering design of the collimator components and radiation shielding are based on comprehensive MARS15 simulations predicting high collimation efficiency as well as tolerable levels of prompt and residual radiation. The system installation during the Fermilab 2016 facility shutdown will permit commissioning in the subsequent operating period.

  4. Activities of the Student Forum of the Geoinformation Forum Japan

    Science.gov (United States)

    Oba, A.; Miyazaki, H.

    2012-07-01

    This reports a history and future prospects of the activities by the Student Forum of the Geoinformation Forum Japan. For growths of academic fields, active communications among students and young scientists are indispensable. Several academic communities in geoinformation fields are established by youths and play important roles of building networks over schools and institutes. The networks are expected to be innovative cooperation after the youths achieve their professions. Although academic communities are getting fixed growth particularly in Japan, youths had gotten little opportunities to make contacts with youths themselves. To promote gotten youth activities among geoinformation fields, in 1998, we started a series of programs that named the Student Forum of the Geoinformation Forum Japan involving students and young scientists within the annual conferences, Geoinformation Forum Japan. The programs have provided opportunities to do presentation their studies by posters, some events, and motivations to create networks among students and young scientists. From 2009, some members of our activities set additional conference in west area of Japan. Thus our activities are spread within Japan. As a result of these achievements, the number of youth dedicating to the programs keeps growing. From 2009, it's getting international gradually, however, almost all the participants are still Japanese. To keep and expand the network, we are planning to make some nodes with some Asian youth organizations in the field of geoinformation. This paper is concluded with proposals and future prospects on the Student Forum of the Geoinformation Forum Japan.

  5. Addressing the socioeconomic determinants of adolescent health: experiences from the WHO/HBSC Forum 2007.

    Science.gov (United States)

    Koller, Theadora; Morgan, Antony; Guerreiro, Ana; Currie, Candace; Ziglio, Erio

    2009-09-01

    and national delegations to events; feeding into the formulation of national policy or practice design; and enabling the comparison of information systems, policies, interventions, and working methods with other countries and against the evidence base, thus providing encouragement for new and/or validation of existing activities. The WHO/HBSC Forum series is an evolving platform. The methodology for each Forum process incorporates lessons learnt through past Fora - within resource constraints - and is based on the principles of efficiency and effectiveness. Areas requiring further development, identified through the aforementioned interviews and based on the reflections of co-organizers, include identification of means to ensure systematic, appropriate and meaningful youth involvement; maximization of the usefulness of the European consultation; and definition of a budget line and framework for evaluation of the process' impact at country level.

  6. Design correctness of digital systems

    NARCIS (Netherlands)

    Huijs, C.

    1998-01-01

    Transformational design is a formal technique directed at design correctness. It integrates design and verification by the use of pre-proven behaviour preserving transformations as design steps. A formal framework is necessary but hidden for the designer. Five formal aspects are integrated in the

  7. Exploring teacher's instructional design practices from a systems design perspective

    NARCIS (Netherlands)

    Hoogveld, Bert; Paas, Fred; Jochems, Wim; Van Merriënboer, Jeroen

    2010-01-01

    Hoogveld, A. W. M., Paas, F., Jochems, W. M. G., & Van Merriënboer, J. J. G. (2002). Exploring teacher's instructional design practices from a systems design perspective. Instructionals Science, 30, 291-305.

  8. Systems Thinking in Design: Service Design and self-Services

    National Research Council Canada - National Science Library

    John Darzentas; Jenny Siobhane Darzentas

    2014-01-01

    The purpose of this paper is twofold. Firstly, it seeks to use a practical real-world example to demonstrate the power of a systems thinking perspective in design, and more specifically in the design of services...

  9. Design and components of photovoltaic systems

    NARCIS (Netherlands)

    Sark, W.G.J.H.M. van

    2012-01-01

    This chapter provides an overview of the various aspects of photovoltaic (PV) system components and design. The basic performance of cells, modules, and inverters and how this is used in PV system design is described. Two case studies illustrating PV system design are presented: a hybrid system on

  10. CARICOF - The Caribbean Regional Climate Outlook Forum

    Science.gov (United States)

    Van Meerbeeck, Cedric

    2013-04-01

    Centres (GPCs). Indications are that the current seasonal forecasting system used by CARICOF has produced reliable outlooks than previously available. Nevertheless, through its forum platform, areas for further development are continuously being defined, which are then implemented through efficient information exchanges between and hands-on training of forecasters. Finally, the disaster research and emergency management communities have shown that effective early warnings of impending hazards need to be complemented by information on the risks actually posed by the hazards and pathways for action. CARICOF is to address this issue by designing the outputs of the seasonal climate outlooks such that they can then effectively feed into an early warning information system of seasonal climate variability related hazards to its constituent countries' and territories major socio-economic sectors.

  11. The Economic Impact of the Louisiana State University System on the Louisiana State Economy. AIR Forum 1980 Paper.

    Science.gov (United States)

    Engler, Sheldon D.; And Others

    An econometric model was developed for use in measuring the impact of the Louisiana State University (LSU) upon the Louisiana economy. Emphasis is placed on measuring the effects of enrollment changes, salary and wage expenditures, and campus construction activity. The results show that, overall, each dollar spent by the LSU System creates another…

  12. Use of an Attendance Notification System to Improve Student Success and Retention. AIR 1991 Annual Forum Paper.

    Science.gov (United States)

    Budig, Jeanne E.

    A pilot study was conducted to determine whether a computer-generated attendance monitoring system at Vincennes University (Indiana) could increase the academic success of developmental students and of students in two occupational programs currently having high attrition rates. The matched-classes pilot study was conducted during the fall semester…

  13. ITER Disruption Mitigation System Design

    Science.gov (United States)

    Rasmussen, David; Lyttle, M. S.; Baylor, L. R.; Carmichael, J. R.; Caughman, J. B. O.; Combs, S. K.; Ericson, N. M.; Bull-Ezell, N. D.; Fehling, D. T.; Fisher, P. W.; Foust, C. R.; Ha, T.; Meitner, S. J.; Nycz, A.; Shoulders, J. M.; Smith, S. F.; Warmack, R. J.; Coburn, J. D.; Gebhart, T. E.; Fisher, J. T.; Reed, J. R.; Younkin, T. R.

    2015-11-01

    The disruption mitigation system for ITER is under design and will require injection of up to 10 kPa-m3 of deuterium, helium, neon, or argon material for thermal mitigation and up to 100 kPa-m3 of material for suppression of runaway electrons. A hybrid unit compatible with the ITER nuclear, thermal and magnetic field environment is being developed. The unit incorporates a fast gas valve for massive gas injection (MGI) and a shattered pellet injector (SPI) to inject a massive spray of small particles, and can be operated as an SPI with a frozen pellet or an MGI without a pellet. Three ITER upper port locations will have three SPI/MGI units with a common delivery tube. One equatorial port location has space for sixteen similar SPI/MGI units. Supported by US DOE under DE-AC05-00OR22725.

  14. Multidisciplinary systems engineering architecting the design process

    CERN Document Server

    Crowder, James A; Demijohn, Russell

    2016-01-01

    This book presents Systems Engineering from a modern, multidisciplinary engineering approach, providing the understanding that all aspects of systems design, systems, software, test, security, maintenance and the full life-cycle must be factored in to any large-scale system design; up front, not factored in later. It lays out a step-by-step approach to systems-of-systems architectural design, describing in detail the documentation flow throughout the systems engineering design process. It provides a straightforward look and the entire systems engineering process, providing realistic case studies, examples, and design problems that will enable students to gain a firm grasp on the fundamentals of modern systems engineering.  Included is a comprehensive design problem that weaves throughout the entire text book, concluding with a complete top-level systems architecture for a real-world design problem.

  15. Uncertainty management in intelligent design aiding systems

    Science.gov (United States)

    Brown, Donald E.; Gabbert, Paula S.

    1988-01-01

    A novel approach to uncertainty management which is particularly effective in intelligent design aiding systems for large-scale systems is presented. The use of this approach in the materials handling system design domain is discussed. It is noted that, during any point in the design process, a point value can be obtained for the evaluation of feasible designs; however, the techniques described provide unique solutions for these point values using only the current information about the design environment.

  16. Aircraft System Design and Integration

    Directory of Open Access Journals (Sweden)

    D. P. Coldbeck

    2000-01-01

    Full Text Available In the 1980's the British aircraft industry changed its approach to the management of projects from a system where a project office would manage a project and rely on a series of specialist departments to support them to a more process oriented method, using systems engineering models, whose most outwardly visible signs were the introduction of multidisciplinary product teams. One of the problems with the old method was that the individual departments often had different priorities and projects would get uneven support. The change in the system was only made possible for complex designs by the electronic distribution of data giving instantaneous access to all involved in the project. In 1997 the Defence and Aerospace Foresight Panel emphasised the need for a system engineering approach if British industry was to remain competitive. The Royal Academy of Engineering recognised that the change in working practices also changed what was required of a chartered engineer and redefined their requirements in 1997 [1]. The result of this is that engineering degree courses are now judged against new criteria with more emphasis placed on the relevance to industry rather than on purely academic content. At the University of Glasgow it was realized that the students ought to be made aware of current working practices and that there ought to be a review to ensure that the degrees give students the skills required by industry. It was decided to produce a one week introduction course in systems engineering for Masters of Engineering (MEng students to be taught by both university lecturers and practitioners from a range of companies in the aerospace industry with the hope of expanding the course into a module. The reaction of the students was favourable in terms of the content but it seems ironic that the main criticism was that there was not enough discussion involving the students. This paper briefly describes the individual teaching modules and discusses the

  17. On the design of reversible QDCA systems.

    Energy Technology Data Exchange (ETDEWEB)

    DeBenedictis, Erik P.; Frank, Michael P. (Florida State University, Tallahassee, FL); Ottavi, Marco; Frost-Murphy, Sarah E. (University of Notre Dame, Notre Dame, IN)

    2006-10-01

    This work is the first to describe how to go about designing a reversible QDCA system. The design space is substantial, and there are many questions that a designer needs to answer before beginning to design. This document begins to explicate the tradeoffs and assumptions that need to be made and offers a range of approaches as starting points and examples. This design guide is an effective tool for aiding designers in creating the best quality QDCA implementation for a system.

  18. TFTR neutral beam systems conceptual design

    Energy Technology Data Exchange (ETDEWEB)

    1976-03-01

    The functions, design requirements, and design descriptions of the injection system are described. Cost summaries are given for each system and subsystem. The costs presented are for: materials procurement; and shipping, assembly, and installation at the Princeton site. (MOW)

  19. Entity-Based Discussion Forum for Drupal 7

    OpenAIRE

    Werling, Rasmus

    2011-01-01

    This thesis describes the planning and creation of an entity-based discussion forum module for the content management system Drupal 7. The main focus is on how the new entities in Drupal 7 are taken into use in a discussion forum module created from scratch. Also the database structure, the different implemented features and the integration with the Views module are explained. The major differences between Drupal 6 and Drupal 7 are dealt with as well: how everything circled around nod...

  20. Simple Machines Forum, a Solution for Dialogue Optimization between Physicians

    Directory of Open Access Journals (Sweden)

    Laura SÎNGIORZAN

    2013-02-01

    Full Text Available We developed an instrument which can ensure a quick and easy dialogue between the physicians of the Oncology Institute and family physicians. The platform we chose was Simple Machines Forum (abbreviated as SMF, a free Internet forum (BBS - Bulletin Board System application. The purpose of this article is not to detail the software platform, but to emphasize the facilities and advantages of using this solution in the medical community.

  1. COMPLEX DESIGN OF INTEGRATED MATERIAL FLOW SYSTEMS

    OpenAIRE

    PÉTER TELEK; TAMÁS BÁNYAI

    2013-01-01

    Material flow systems have in generally very complex structure and relations. During design, building and operation of complex systems there are many different problems. This paper shows some usable solution for the design and selection process of material flow systems. We give a short overview about the theoretical principles of the design process, then describe the base design tasks, the possibilities of the using of heuristic algorithms and the modelling of material flow systems. At the en...

  2. Application and design of solar photovoltaic system

    Science.gov (United States)

    Tianze, Li; Hengwei, Lu; Chuan, Jiang; Luan, Hou; Xia, Zhang

    2011-02-01

    Solar modules, power electronic equipments which include the charge-discharge controller, the inverter, the test instrumentation and the computer monitoring, and the storage battery or the other energy storage and auxiliary generating plant make up of the photovoltaic system which is shown in the thesis. PV system design should follow to meet the load supply requirements, make system low cost, seriously consider the design of software and hardware, and make general software design prior to hardware design in the paper. To take the design of PV system for an example, the paper gives the analysis of the design of system software and system hardware, economic benefit, and basic ideas and steps of the installation and the connection of the system. It elaborates on the information acquisition, the software and hardware design of the system, the evaluation and optimization of the system. Finally, it shows the analysis and prospect of the application of photovoltaic technology in outer space, solar lamps, freeways and communications.

  3. Integrated design for space transportation system

    CERN Document Server

    Suresh, B N

    2015-01-01

    The book addresses the overall integrated design aspects of a space transportation system involving several disciplines like propulsion, vehicle structures, aerodynamics, flight mechanics, navigation, guidance and control systems, stage auxiliary systems, thermal systems etc. and discusses the system approach for design, trade off analysis, system life cycle considerations, important aspects in mission management, the risk assessment, etc. There are several books authored to describe the design aspects of various areas, viz., propulsion, aerodynamics, structures, control, etc., but there is no book which presents space transportation system (STS) design in an integrated manner. This book attempts to fill this gap by addressing systems approach for STS design, highlighting the integrated design aspects, interactions between various subsystems and interdependencies. The main focus is towards the complex integrated design to arrive at an optimum, robust and cost effective space transportation system. The orbit...

  4. Research on conceptual design of mechatronic systems

    Indian Academy of Sciences (India)

    http://www.ias.ac.in/article/fulltext/sadh/031/06/0661-0669. Keywords. Conceptual design; interface matching; mechatronic system; cyclic feedback mapping. ... Finally, a computer-aided conceptual design automatic software system for mechatronic systems is developed and the conceptual design of a computerised ...

  5. Water Finance Forum-Texas

    Science.gov (United States)

    Regional Finance Forum: Financing Resilient and Sustainable Water Infrastructure, held in Addison, Texas, September 10-11, 2015.Co-sponsored by EPA's Water Infrastructure and Resiliency Finance Center and the Environmental Finance Center Network.

  6. Forum outlines top emerging technologies

    Science.gov (United States)

    Extance, Andy

    2015-04-01

    Additive manufacturing, next-generation robotics, "sense and avoid" drones that fly themselves, artificial intelligence and "neuromorphic" computing have all made it into the World Economic Forum's top 10 emerging technologies for 2015.

  7. Fagligt Forum ved en skillevej

    DEFF Research Database (Denmark)

    Bjerg, Claus

    2008-01-01

    Med cvu-bibliotekernes overgang til professionshøjskoler ændres det biblioteksfaglige landskab. Det har Fagligt Forum taget konsekvensen af og nedlægger sig selv i løbet af 2000......Med cvu-bibliotekernes overgang til professionshøjskoler ændres det biblioteksfaglige landskab. Det har Fagligt Forum taget konsekvensen af og nedlægger sig selv i løbet af 2000...

  8. Forum, Dedicated to Inclusive Education

    Directory of Open Access Journals (Sweden)

    Vachkov I.V.

    2015-06-01

    Full Text Available 26 – 27 of February 2015 in Kazan, in the University of Management “TISBI” been held National (All-Russian forum of promotion of ideas and principles of inclusive education (with international participants “Study and live together: open space of inclusion”. During the work of Forum the most topical questions of inclusive education implement in Russian Federation been discussed.

  9. Hybrid robot climbing system design

    Science.gov (United States)

    Purna Irawan, Agustinus; Halim, Agus; Kurniawan, Hengky

    2017-09-01

    This research aims to develop a climbing hybrid robot, especially to design the structure of robot that quite strong and how to build an optimal mechanism for transmitting the motor’s rotation and torque to generate movement up the pole. In this research we use analytical methods using analysis software, simulation, a prototype, and robot trial. The result showed that robot could climb a pole by with maximum velocity 0.33m/s with a 20 kg load. Based on a weight diversity trial between 10 kg and 20 kg we obtained climb up load factor with value 0.970 ± 0.0223 and climb down load factor with value 0.910 ± 0.0163. Displacement of the frame structure was 7.58 mm. To minimize this displacement, the gate system was used so as to optimize the gripper while gripping the pole. The von Misses stress in the roller was 48.49 MPa, with 0.12 mm of displacement. This result could be a reference for robot development in further research.

  10. Relating Systems Thinking and Design I. Practical Advances in Systemic Design

    OpenAIRE

    Birger Sevaldson; Ryan, Alex J.

    2014-01-01

    This issue, Relating Systems Thinking and Design I – Practical Advances in Systemic Design, along with Issue 7:4, Relating Systems Thinking II – Theoretical Evolution in Systemic Design, together form a double special issue of FORMakademisk on the theory and practice of Systemic Design.

  11. System level ESD co-design

    CERN Document Server

    Gossner, Harald

    2015-01-01

    An effective and cost efficient protection of electronic system against ESD stress pulses specified by IEC 61000-4-2 is paramount for any system design. This pioneering book presents the collective knowledge of system designers and system testing experts and state-of-the-art techniques for achieving efficient system-level ESD protection, with minimum impact on the system performance. All categories of system failures ranging from ‘hard’ to ‘soft’ types are considered to review simulation and tool applications that can be used. The principal focus of System Level ESD Co-Design is defining and establishing the importance of co-design efforts from both IC supplier and system builder perspectives. ESD designers often face challenges in meeting customers' system-level ESD requirements and, therefore, a clear understanding of the techniques presented here will facilitate effective simulation approaches leading to better solutions without compromising system performance. With contributions from Robert Asht...

  12. Design Process-System and Methodology of Design Research

    Science.gov (United States)

    Bashier, Fathi

    2017-10-01

    Studies have recognized the failure of the traditional design approach both in practice and in the studio. They showed that design problems today are too complex for the traditional approach to cope with and reflected a new interest in a better quality design services in order to meet the challenges of our time. In the mid-1970s and early 1980s, there has been a significant shift in focus within the field of design research towards the aim of creating a ‘design discipline’. The problem, as will be discussed, is the lack of an integrated theory of design knowledge that can explicitly describe the design process in a coherent way. As a consequence, the traditional approach fails to operate systematically, in a disciplinary manner. Addressing this problem is the primary goal of the research study in the design process currently being conducted in the research-based master studio at Wollega University, Ethiopia. The research study seeks to make a contribution towards a disciplinary approach, through proper understanding the mechanism of knowledge development within design process systems. This is the task of the ‘theory of design knowledge’. In this article the research project is introduced, and a model of the design process-system is developed in the studio as a research plan and a tool of design research at the same time. Based on data drawn from students’ research projects, the theory of design knowledge is developed and empirically verified through the research project.

  13. Simulation, Design Abstraction, and SystemC

    Science.gov (United States)

    Harcourt, Ed

    2007-01-01

    SystemC is a system-level design and simulation language based on C++. We've been using SystemC for computer organization and design projects for the past several years. Because SystemC is embedded in C++ it contains the powerful abstraction mechanisms of C++ not found in traditional hardware description languages, such as support for…

  14. Towards design space exploration for biological systems

    NARCIS (Netherlands)

    Polstra, S.; Pronk, T.E.; Pimentel, A.D.; Breit, T.M.

    2008-01-01

    For both embedded systems and biological cell systems, design is a feature that defines their identity. The assembly of different components in designs of both systems can vary widely. Given the similarities between computers and cellular systems, methods and models of computation from the domain of

  15. Screening candidate systems engineers: a research design

    CSIR Research Space (South Africa)

    Goncalves, DP

    2009-07-01

    Full Text Available In this paper, the authors focus on the human dimension of Systems Engineering by addressing the need for the development of systems engineering potential in candidate engineers. Specifically, the authors propose a research design for a systems...

  16. A multidisciplinary design optimization advisory system for aircraft design

    OpenAIRE

    Hoogreef, M.F.M.; d'Ippolito, R.; Augustinus, R.; La Rocca, G.

    2015-01-01

    This paper presents the status of development of an MDO advisory system, coupled to an optimization configurator for a process integration and design optimization (PIDO) system. This advisory system can support non-experts in the application of MDO by giving advice on the type of MDO architecture to use and assist in the implementation of the actual problem inside a PIDO system. Both the advisory system and optimization configurator are implemented by means of knowledge based technologies tha...

  17. Simple adaptive control system design trades

    NARCIS (Netherlands)

    Mooij, E.

    2017-01-01

    In the design of a Model Reference Adaptive Control system, a reference model serves as the (well-known) basis through which system and user requirements can find their way into the design. By tuning the design parameters, the response of the actual vehicle should track the response of the

  18. Road.safety.forum - Integrated safety concepts and reliability. Proceedings; verkehrs.sicherheits.forum - Integrierte Sicherheitskonzepte und Zuverlaessigkeit. Tagungsband

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    The proceedings volume of the two days Meeting titled:''road.safety.forum - Integrated Safety Concepts and Reliability'' which has been held on the 5th and 6th April 2005 in Leipzig, includes the ten contributions presented. The subjects were as follows: safety and reliability in modern vehicles; e-safty activities of European Commission; advanced safety technology for enhanced road safety; safety systems - sometimes less may be more - analysis related to markets with limited purchasing power like in Czech Republic; modern design of the truck driver's workplace and supporting technologies for road safety; risk management and car safety; concepts of driver assistance - state of affairs and outlook; to err (while driving) is human - which technical systems can help?; Safety Net: developing the European Road Safety Observatory; consumer safety ratings and their effect on car safety. The manuscripts are available in the form of reproduced overhead foils. (AKF)

  19. A multidisciplinary design optimization advisory system for aircraft design

    NARCIS (Netherlands)

    Hoogreef, M.F.M.; D'Ippolito, R.; Augustinus, R.; La Rocca, G.

    2015-01-01

    This paper presents the status of development of an MDO advisory system, coupled to an optimization configurator for a process integration and design optimization (PIDO) system. This advisory system can support non-experts in the application of MDO by giving advice on the type of MDO architecture to

  20. Systems Thinking in Design: Service Design and self-Services

    Directory of Open Access Journals (Sweden)

    John Darzentas

    2014-12-01

    Full Text Available The purpose of this paper is twofold. Firstly, it seeks to use a practical real-world example to demonstrate the power of a systems thinking perspective in design, and more specifically in the design of services. It makes use of the paradigm of e-accessibility, in the application domain of publicly available self-services. Secondly, the benefits of this perspective will be discussed, through some theoretical tenets of systems thinking, such as the use of emerging properties, the law of requisite variety and notions of second order cybernetics, in terms of the richness that they offer to the conceptualisation and praxis of design in general, and service design in particular. Finally, we speculate on the implications of systems thinking to question the nature of the interdisciplinarity and even transdisciplinarity of design.

  1. Stakeholder views on the incorporation of traditional birth attendants into the formal health systems of low-and middle-income countries: a qualitative analysis of the HIFA2015 and CHILD2015 email discussion forums.

    Science.gov (United States)

    Owolabi, Onikepe Oluwadamilola; Glenton, Claire; Lewin, Simon; Pakenham-Walsh, Neil

    2014-03-27

    Health workforce shortages are key obstacles to the achievement of the health-related Millennium Development Goals. Task shifting is seen as a way to improve access to pregnancy and childbirth care. However, the role of traditional birth attendants (TBAs) within task shifting initiatives remains contested. The objective of this study was to explore stakeholder views and justifications regarding the incorporation of TBAs into formal health systems. Data were drawn from messages submitted to the HIFA2015 and CHILD2015 email discussion forums. The forums focus on the healthcare information needs of frontline health workers and citizens in low - and middle-income countries, and how these needs can be met, and also include discussion of diverse aspects of health systems. Messages about TBAs submitted between 2007-2011 were analysed thematically. We identified 658 messages about TBAs from a total of 193 participants. Most participants supported the incorporation of trained TBAs into primary care systems to some degree, although their justifications for doing so varied. Participant viewpoints were influenced by the degree to which TBA involvement was seen as a long-term or short-term solution and by the tasks undertaken by TBAs. Many forum members indicated that they were supportive of trained TBAs being involved in the provision of pregnancy care. Members noted that TBAs were already frequently used by women and that alternative options were lacking. However, a substantial minority regarded doing so as a threat to the quality and equity of healthcare. The extent of TBA involvement needs to be context-specific and should be based on evidence on effectiveness as well as evidence on need, acceptability and feasibility.

  2. Harnessing VLSI System Design with EDA Tools

    CERN Document Server

    Kamat, Rajanish K; Gaikwad, Pawan K; Guhilot, Hansraj

    2012-01-01

    This book explores various dimensions of EDA technologies for achieving different goals in VLSI system design. Although the scope of EDA is very broad and comprises diversified hardware and software tools to accomplish different phases of VLSI system design, such as design, layout, simulation, testability, prototyping and implementation, this book focuses only on demystifying the code, a.k.a. firmware development and its implementation with FPGAs. Since there are a variety of languages for system design, this book covers various issues related to VHDL, Verilog and System C synergized with EDA tools, using a variety of case studies such as testability, verification and power consumption. * Covers aspects of VHDL, Verilog and Handel C in one text; * Enables designers to judge the appropriateness of each EDA tool for relevant applications; * Omits discussion of design platforms and focuses on design case studies; * Uses design case studies from diversified application domains such as network on chip, hospital on...

  3. Introduction to Space Systems Design and Synthesis

    CERN Document Server

    Aguirre, Miguel A

    2013-01-01

    The definition of all space systems starts with the establishment of its fundamental parameters: requirements to be fulfilled, overall system and satellite design, analysis and design of the critical elements, developmental approach, cost, and schedule. There are only a few texts covering early design of space systems and none of them has been specifically dedicated to it. Furthermore all existing space engineering books concentrate on analysis. None of them deal with space system synthesis – with the interrelations between all the elements of the space system. Introduction to Space Systems concentrates on understanding the interaction between all the forces, both technical and non-technical, which influence the definition of a space system. This book refers to the entire system: space and ground segments, mission objectives as well as to cost, risk, and mission success probabilities. Introduction to Space Systems is divided into two parts. The first part analyzes the process of space system design in an ab...

  4. The Design of Large Technological Systems

    DEFF Research Database (Denmark)

    Pineda, Andres Felipe Valderrama

    This is a study of the processes of design of large technological systems based on a two-case study: the rapid transit bus system, Transmilenio, in Bogotá, Colombia, and the urban rail system, Metro, in Copenhagen, Denmark. The research focused especially on the process by which designers define...

  5. Design of multistable systems via partial synchronization

    Indian Academy of Sciences (India)

    Home; Journals; Pramana – Journal of Physics; Volume 89; Issue 2. Design of multistable systems via partial synchronization. MOHAMMAD ALI KHAN ... In this paper, we introduce a generalized scheme for designing multistable systems by coupling two different dynamical systems. The basic idea of the scheme is to ...

  6. The Forum for Defence of the Brazilian Unified Health System (Sistema Único de Saúde) and its role in building community participation in the fight against the privatization of health.

    Science.gov (United States)

    de Lara, Lutiane; Guareschi, Neuza Maria de Fátima

    2016-03-01

    Based on a Foucauldian framework, this article discusses the involvement of the Forum for Defence of the Sistema Único de Saúde in the fight against health care privatization. Community participation is a locus of experience that produces subjects implicated in the production of public health care. The locus of experience in this instance derives from the rejection of private elements that historically have been part of Brazilian public policies. It is an experience that produces workers and service users as agents able to defend the public system and endowed with instituting power. © The Author(s) 2016.

  7. Challenges in Designing Mechatronic Systems

    DEFF Research Database (Denmark)

    Torry-Smith, Jonas; Qamar, Ahsan; Achiche, Sofiane

    2013-01-01

    Development of mechatronic products is traditionally carried out by several design experts from different design domains. Performing development of mechatronic products is thus greatly challenging. In order to tackle this, the critical challenges in mechatronics have to be well understood and well...... supported through applicable methods and tools. This paper aims at identifying the major challenges, by conducting a systematic and thorough survey of the most relevant research work in mechatronic design. Solutions proposed in literature are assessed and illustrated through a case study in order...... to investigate if the challenges can be handled appropriately by the methods, tools, and mindsets suggested by the mechatronic community. Using a real world mechatronics case, the paper identifies the areas where further research is required, by showing a clear connection between the actual problems faced during...

  8. Participatory simulation in hospital work system design

    DEFF Research Database (Denmark)

    Andersen, Simone Nyholm

    When ergonomic considerations are integrated into the design of work systems, both overall system performance and employee well-being improve. A central part of integrating ergonomics in work system design is to benefit from emplo y-ees’ knowledge of existing work systems. Participatory simulation...... (PS) is a method to access employee knowledge; namely employees are involved in the simulation and design of their own future work systems through the exploration of models representing work system designs. However, only a few studies have investigated PS and the elements of the method. Yet...... understanding the elements is essential when analyzing and planning PS in research and practice. This PhD study investigates PS and the method elements in the context of the Danish hospital sector, where PS is applied in the renewal and design of public hospitals and the work systems within the hospitals...

  9. 17. telekomunikacioni forum TELFOR 2009

    Directory of Open Access Journals (Sweden)

    Nebojša N. Gaćeša

    2010-04-01

    Full Text Available U Beogradu je 24, 25. i 26. novembra 2009. godine, u Sava centru, održan 17. telekomunikacioni forum TELFOR 2009, u organizaciji Društva za telekomunikacije – Beograd, „Telekom Srbija“ a. d., JP PTT saobraćaja „Srbija“, Elektrotehničkog fakulteta Univerziteta u Beogradu i IEEE Serbia & Montenegro ComSoc Chapter and Section. Telekomunikacioni forum TELFOR organizuje se sedamnaesti put kao domaći i regionalni godišnji skup stručnjaka koji rade u oblastima telekomunikacija i informacionih tehnologija. Učesnici su uglavnom telekomunikacioni inženjeri, ali i ekonomisti, pravnici, menadžeri, operatori i drugi. Na taj način TELFOR predstavlja forum u okviru kojeg se razmatraju sva relevantna pitanja telekomunikacija: tehnička, razvojna, regulatorna i ekonomska, pitanja proizvodnje opreme, usluga, servisa i funkcionisanja sistema.

  10. Systemic Design: Two Canadian Case Studies

    Directory of Open Access Journals (Sweden)

    Alex Ryan

    2014-12-01

    Full Text Available This paper introduces two novel applications of systemic design to facilitate a comparison of alternative methodologies that integrate systems thinking and design. In the first case study, systemic design helped the Procurement Department at the University of Toronto re-envision how public policy is implemented and how value is created in the broader university purchasing ecosystem. This resulted in an estimated $1.5 million in savings in the first year, and a rise in user retention rates from 40% to 99%. In the second case study, systemic design helped the clean energy and natural resources group within the Government of Alberta to design a more efficient and effective resource management system and shift the way that natural resource departments work together. This resulted in the formation of a standing systemic design team and contributed to the creation of an integrated resource management system. A comparative analysis of the two projects identifies a shared set of core principles for systemic design as well as areas of differentiation that reveal potential for learning across methodologies. Together, these case studies demonstrate the complementarity of systems thinking and design thinking, and show how they may be integrated to guide positive change within complex sociotechnical systems.

  11. Embedded systems design with special arithmetic and number systems

    CERN Document Server

    Sousa, Leonel; Chang, Chip-Hong

    2017-01-01

    This book introduces readers to alternative approaches to designing efficient embedded systems using unconventional number systems. The authors describe various systems that can be used for designing efficient embedded and application-specific processors, such as Residue Number System, Logarithmic Number System, Redundant Binary Number System Double-Base Number System, Decimal Floating Point Number System and Continuous Valued Number System. Readers will learn the strategies and trade-offs of using unconventional number systems in application-specific processors and be able to apply and design appropriate arithmetic operations from these number systems to boost the performance of digital systems. • Serves as a single-source reference to designing embedded systems with unconventional number systems • Covers theory as well as implementation on application-specific processors • Explains mathematical concepts in a manner accessible to readers with diverse backgrounds.

  12. Designing Systems in an Organizational Context

    DEFF Research Database (Denmark)

    Simonsen, Jesper

    This dissertation is concerned with the early part of systems design, the purpose of which is that users and their managers can decide which computer-based systems are needed and relevant, and how they can be provided, i.e. purchased, and/or developed, and implemented, in a specific organization....... Systems design begins with a recognition of a possible need for computer support in a specific organization, continues until this need has been analysed, described, evaluated, and discussed, and ends with the description of an overall conceptual and functional design for the corresponding computer......-based systems. The research objective behind this dissertation aims at developing theories of and approaches to systems design, which should provide a basis for designers to improve their work practices. In other words, this dissertation contributes to a clarification of what is going on in design, and how we...

  13. 78 FR 45598 - Industry Forums on the Next ITS Strategic Plan; Notice of Public Meeting

    Science.gov (United States)

    2013-07-29

    ... Industry Forums on the Next ITS Strategic Plan; Notice of Public Meeting AGENCY: ITS Joint Program Office... JPO) will participate in four industry forums by facilitating workshops to generate feedback for the next ITS Strategic Plan (2015-2019). The workshops are designed to generate ideas and collect...

  14. Forum Analysis in Cyberspace: The Case of Public Sector Higher Education.

    Science.gov (United States)

    Beckham, Joseph C.; Schmid, William, Jr.

    1995-01-01

    Discusses the uncertainty surrounding the application of the First Amendment to electronic bulletin boards, listservs, electronic conferences, and other exchanges of electronic information at public colleges and universities. Applies the notions of nonpublic forums and designated open forums to the computer network. (MLF)

  15. Decentralized systems with design constraints

    CERN Document Server

    Mahmoud, Magdi S

    2014-01-01

    This volume provides a rigorous examination of the analysis, stability and control of large-scale systems, and addresses the difficulties that arise because of dimensionality, information structure constraints, parametric uncertainty and time-delays.

  16. Simulation systems: design and applications

    Directory of Open Access Journals (Sweden)

    Liudmila Burtseva

    1996-09-01

    Full Text Available In this paper the history of Simulation System Group investigations is presented. Some important achievements in past and present time are marked. The directions of future investigations are discussed in the fourth section of the paper.

  17. Design Automation for Streaming Systems

    Science.gov (United States)

    2005-12-16

    Verilog back-end emits them as black boxes. 3.6 System Composition We synthesize a system as a composition of stream-connected pages, where a page...Figure 6.5 shows a sample state flow graph for clustering. Each node denotes a state and its action. Each black 242 Chapter 6. Streaming Programmable...Bilsen, Marc Engels, Rudy Lauwereins, and Jean Peper - straete. Cyclo-static dataflow. IEEE Transactions on Signal Processing, 44(2):397– 408, February

  18. Design of low noise imaging system

    Science.gov (United States)

    Hu, Bo; Chen, Xiaolai

    2017-10-01

    In order to meet the needs of engineering applications for low noise imaging system under the mode of global shutter, a complete imaging system is designed based on the SCMOS (Scientific CMOS) image sensor CIS2521F. The paper introduces hardware circuit and software system design. Based on the analysis of key indexes and technologies about the imaging system, the paper makes chips selection and decides SCMOS + FPGA+ DDRII+ Camera Link as processing architecture. Then it introduces the entire system workflow and power supply and distribution unit design. As for the software system, which consists of the SCMOS control module, image acquisition module, data cache control module and transmission control module, the paper designs in Verilog language and drives it to work properly based on Xilinx FPGA. The imaging experimental results show that the imaging system exhibits a 2560*2160 pixel resolution, has a maximum frame frequency of 50 fps. The imaging quality of the system satisfies the requirement of the index.

  19. Axiomatic Design of Space Life Support Systems

    Science.gov (United States)

    Jones, Harry W.

    2017-01-01

    Systems engineering is an organized way to design and develop systems, but the initial system design concepts are usually seen as the products of unexplained but highly creative intuition. Axiomatic design is a mathematical approach to produce and compare system architectures. The two axioms are:- Maintain the independence of the functional requirements.- Minimize the information content (or complexity) of the design. The first axiom generates good system design structures and the second axiom ranks them. The closed system human life support architecture now implemented in the International Space Station has been essentially unchanged for fifty years. In contrast, brief missions such as Apollo and Shuttle have used open loop life support. As mission length increases, greater system closure and increased recycling become more cost-effective.Closure can be gradually increased, first recycling humidity condensate, then hygiene wastewater, urine, carbon dioxide, and water recovery brine. A long term space station or planetary base could implement nearly full closure, including food production. Dynamic systems theory supports the axioms by showing that fewer requirements, fewer subsystems, and fewer interconnections all increase system stability. If systems are too complex and interconnected, reliability is reduced and operations and maintenance become more difficult. Using axiomatic design shows how the mission duration and other requirements determine the best life support system design including the degree of closure.

  20. ECNS '99 - Young scientists forum

    DEFF Research Database (Denmark)

    Ceretti, M.; Janssen, S.; McMorrow, D.F.

    2000-01-01

    The Young Scientists Forum is a new venture for ECNS and follows the established tradition of an active participation by young scientists in these conferences. At ECNS '99 the Young Scientists Forum brought together 30 young scientists from 13 European countries. In four working groups......, they discussed emerging scientific trends in their areas of expertise and the instrumentation required to meet the scientific challenges. The outcome was presented in the Young Scientists Panel on the final day of ECNS '99. This paper is a summary of the four working group reports prepared by the Group Conveners....... (C) 2000 Elsevier Science B.V. All rights reserved....

  1. Aviation System Analysis Capability Executive Assistant Design

    Science.gov (United States)

    Roberts, Eileen; Villani, James A.; Osman, Mohammed; Godso, David; King, Brent; Ricciardi, Michael

    1998-01-01

    In this technical document, we describe the design developed for the Aviation System Analysis Capability (ASAC) Executive Assistant (EA) Proof of Concept (POC). We describe the genesis and role of the ASAC system, discuss the objectives of the ASAC system and provide an overview of components and models within the ASAC system, and describe the design process and the results of the ASAC EA POC system design. We also describe the evaluation process and results for applicable COTS software. The document has six chapters, a bibliography, three appendices and one attachment.

  2. The Analysis and Design of Distributed Systems

    NARCIS (Netherlands)

    Aksit, Mehmet

    1992-01-01

    The design of distributed object-oriented systems involves a number of considerations that rarely arise in sequential object-oriented design or in non-object-oriented languages. The tutorial describes analysis and design techniques for data abstraction, inheritance, delegation, persistence,

  3. Designing To Learn about Complex Systems.

    Science.gov (United States)

    Hmelo, Cindy E.; Holton, Douglas L.; Kolodner, Janet L.

    2000-01-01

    Indicates the presence of complex structural, behavioral, and functional relations to understanding. Reports on a design experiment in which 6th grade children learned about the human respiratory system by designing artificial lungs and building partial working models. Makes suggestions for successful learning from design activities. (Contains 44…

  4. Algebraic Varieties and System Design

    DEFF Research Database (Denmark)

    Aabrandt, Andreas

    Design and analysis of networks have many applications in the engineering sciences. This dissertation seeks to contribute to the methods used in the analysis of networks with a view towards assisting decision making processes. Networks are initially considered as objects in the category of graphs...... and later as objects in the category of hypergraphs. The connection with the category of simplicial pairs become apparent when the topology is analyzed using homological algebra. A topological ranking is developed that measures the ability of the network to stay path-connected. Combined with the analysis...... are called algebraic varieties....

  5. Accelerating Science Driven System Design With RAMP

    Energy Technology Data Exchange (ETDEWEB)

    Wawrzynek, John [Univ. of California, Berkeley, CA (United States)

    2015-05-01

    Researchers from UC Berkeley, in collaboration with the Lawrence Berkeley National Lab, are engaged in developing an Infrastructure for Synthesis with Integrated Simulation (ISIS). The ISIS Project was a cooperative effort for “application-driven hardware design” that engages application scientists in the early parts of the hardware design process for future generation supercomputing systems. This project served to foster development of computing systems that are better tuned to the application requirements of demanding scientific applications and result in more cost-effective and efficient HPC system designs. In order to overcome long conventional design-cycle times, we leveraged reconfigurable devices to aid in the design of high-efficiency systems, including conventional multi- and many-core systems. The resulting system emulation/prototyping environment, in conjunction with the appropriate intermediate abstractions, provided both a convenient user programming experience and retained flexibility, and thus efficiency, of a reconfigurable platform. We initially targeted the Berkeley RAMP system (Research Accelerator for Multiple Processors) as that hardware emulation environment to facilitate and ultimately accelerate the iterative process of science-driven system design. Our goal was to develop and demonstrate a design methodology for domain-optimized computer system architectures. The tangible outcome is a methodology and tools for rapid prototyping and design-space exploration, leading to highly optimized and efficient HPC systems.

  6. Design of Residential Photovoltaic Systems

    DEFF Research Database (Denmark)

    Kerekes, Tamas; Sera, Dezso; Mathe, Laszlo

    2017-01-01

    Renewable energy has become very important both worldwide and on the European market, mainly due to the decrease in the photovoltaic (PV) system cost (up to 75%) during the last decade. PV installations worldwide have reached 227 GW at the end of 2015 with a predicted extra 50 GW of new installat......Renewable energy has become very important both worldwide and on the European market, mainly due to the decrease in the photovoltaic (PV) system cost (up to 75%) during the last decade. PV installations worldwide have reached 227 GW at the end of 2015 with a predicted extra 50 GW of new...

  7. Implantable intraocular pressure monitoring systems: Design considerations

    KAUST Repository

    Arsalan, Muhammad

    2013-12-01

    Design considerations and limitations of implantable Intraocular Pressure Monitoring (IOPM) systems are presented in this paper. Detailed comparison with the state of the art is performed to highlight the benefits and challenges of the proposed design. The system-on-chip, presented here, is battery free and harvests energy from incoming RF signals. This low-cost design, in standard CMOS process, does not require any external components or bond wires to function. This paper provides useful insights to the designers of implantable wireless sensors in terms of design choices and associated tradeoffs. © 2013 IEEE.

  8. Eawag Forum Chriesbach - Detailed energy balance - Final report; Energie-Detailbilanz des Eawag Forum Chriesbach - Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Guettinger, H.; Lichtensteiger, T.; Mauz, M. [Eidgenoessische Anstalt fuer Wasserversorgung, Abwasserreinigung und Gewaesserschutz, EAWAG, Duebendorf (Switzerland); Velsen, S. van [3-Plan Haustechnik AG, Winterthur (Switzerland); Lehmann, B.; Frank, T.; Dorer, V.; Beerle, D. [Eidgenoessische Materialpruefungs- und Forschungsanstalt, EMPA, Duebendorf (Switzerland)

    2009-06-15

    In June 2006 Eawag moved into its new headquarters, Forum Chriesbach. The building's external appearance is striking owing to the 1232 blue glass panels which clad the compact 6-storey rectangular structure. Eawag Forum Chriesbach houses 150 workplaces, a staff cafeteria, meeting and seminar rooms as well as the library of Eawag and Empa. It is an exemplary illustration of 'sustainable' construction design and is one of the best known buildings in Switzerland. It has been awarded several prizes and described in numerous national and international publications. The building is modern, functional, aesthetic, and uses a unique array of sources for heating, including the sun as well as waste heat from light sources, electric appliances and people. Cooling requirements are very low. Only electricity requirements and the embedded energy of construction materials are of significance. Approximately one third of the electricity required, namely 70 MWh/a, is produced by photovoltaic panels on the roof, and the rest is purchased as renewable electricity from the utilities under the label 'nature-made star'. During a two-year optimization period the building's control system was adjusted and know-how was transferred from planners and builders to owners and facility managers. From autumn 2007 Eawag, Empa and 3-Plan Haustechnik AG carried out temperature and energy measurements to determine the extent to which original planning assumptions and simulation forecasts corresponded to actual experience. Computer simulations with TRNSYS have revealed the relative contribution of individual building components to the overall energy balance and their sensitivity to external parameters. Temperatures during hot summer days have remained in comfortable ranges below 26 {sup o}C and have usually ranged between 20 and 23 {sup o}C in winter. Although heating and electricity requirements have exceeded predicted levels, at 5.7 kWh/m{sup 2} weighted energy reference

  9. Risk analysis of computer system designs

    Science.gov (United States)

    Vallone, A.

    1981-01-01

    Adverse events during implementation can affect final capabilities, schedule and cost of a computer system even though the system was accurately designed and evaluated. Risk analysis enables the manager to forecast the impact of those events and to timely ask for design revisions or contingency plans before making any decision. This paper presents a structured procedure for an effective risk analysis. The procedure identifies the required activities, separates subjective assessments from objective evaluations, and defines a risk measure to determine the analysis results. The procedure is consistent with the system design evaluation and enables a meaningful comparison among alternative designs.

  10. A Design Framework for Awareness Systems

    Science.gov (United States)

    Markopoulos, Panos

    This chapter discusses the design of awareness systems, whose main function is a social one, namely, to support social communication, mediated social interactions and eventually relationships of the individuals they connect. We focus especially on connecting friends and family rather than on systems used in the context of collaborative work. Readers interested in this latter kind of applications are referred to the design frameworks by Ginelle and Gutwin (2005) and Gutwin and Greenberg (2002). Below, we outline the relevant design space and the corresponding challenges for the design of awareness systems. The challenges pertain to social aspects of interaction design rather than the technological challenges relating to such systems. As such, they are inspired by Jonathan Grudin’s exposition of design challenges for the domain of groupware applications (Grudin, 1994).

  11. Model checking embedded system designs

    NARCIS (Netherlands)

    Brinksma, Hendrik; Mader, Angelika H.

    2002-01-01

    Model checking has established itself as a successful tool supported technique for the verification and debugging of various hardware and software systems [16]. Not only in academia, but also by industry this technique is increasingly being regarded as a promising and practical proposition,

  12. Software Prototyping: Designing Systems for Users.

    Science.gov (United States)

    Spies, Phyllis Bova

    1983-01-01

    Reports on major change in computer software development process--the prototype model, i.e., implementation of skeletal system that is enhanced during interaction with users. Expensive and unreliable software, software design errors, traditional development approach, resources required for prototyping, success stories, and systems designer's role…

  13. Designing comprehensible self-organising systems

    NARCIS (Netherlands)

    N.F. Höning (Nicolas); J.A. La Poutré (Han)

    2010-01-01

    textabstractSelf-organising systems are a popular engineering concept for designing decentralised autonomic computing systems. They are able to find solutions in complex and versatile problem domains, but as they capture more complexity in their own design, they are becoming less and less

  14. Interactive graphical computer-aided design system

    Science.gov (United States)

    Edge, T. M.

    1975-01-01

    System is used for design, layout, and modification of large-scale-integrated (LSI) metal-oxide semiconductor (MOS) arrays. System is structured around small computer which provides real-time support for graphics storage display unit with keyboard, slave display unit, hard copy unit, and graphics tablet for designer/computer interface.

  15. Designing and Conducting Health Systems Research Projects ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Designing and Conducting Health Systems Research Projects Volume 2: Data Analyses and Report Writing. Book cover Designing and Conducting Health Systems Research Projects Volume 2: Data Analyses and Report. Author(s):. Corlien M. Varkevisser, Indra Pathmanathan, and Ann Brownlee. Publisher(s):. KIT, IDRC.

  16. Students' Critical Thinking in Online Discussion Forum

    OpenAIRE

    Fitriana, Sela; Anggia, Helta

    2016-01-01

    Online discussion forum is well-known in educational technology development especially in blended learning because it supports the traditional face to face (f2f) class. Online discussion forum is familiar as the leading of critical thinking process. This paper reports about qualitative study on web-based class by using blended learning focuses on online discussion forum. This study is held in order to analyze the critical thinking process that appears during online discussion forum class. Thi...

  17. TWRS information locator database system design description

    Energy Technology Data Exchange (ETDEWEB)

    Knutson, B.J.

    1996-09-13

    This document gives an overview and description of the Tank Waste Remediation System (TWRS) Information Locator Database (ILD)system design. The TWRS ILD system is an inventory of information used in the TWRS Systems Engineering process to represent the TWRS Technical Baseline. The inventory is maintained in the form of a relational database developed in Paradox 4.5.

  18. Responding to "Cross-Pollinating Culturally Sustaining Pedagogy and Universal Design for Learning: Toward an Inclusive Pedagogy That Accounts for Dis/Ability". A Harvard Educational Review Forum

    Science.gov (United States)

    Alim, H. Samy; Baglieri, Susan; Ladson-Billings, Gloria; Paris, Django; Rose, David H.; Valente, Joseph Michael

    2017-01-01

    In the fall of 2016, the "Harvard Educational Review" ("HER") published "Cross-Pollinating Culturally Sustaining Pedagogy and Universal Design for Learning: Toward an Inclusive Pedagogy that Accounts for Dis/Ability" by Federico R. Waitoller, assistant professor in the Department of Special Education at the University…

  19. Design Technology for Heterogeneous Embedded Systems

    CERN Document Server

    O'Connor, Ian; Piguet, Christian

    2012-01-01

    Designing technology to address the problem of heterogeneous embedded systems, while remaining compatible with standard “More Moore” flows, i.e. capable of handling simultaneously both silicon complexity and system complexity, represents one of the most important challenges facing the semiconductor industry today. While the micro-electronics industry has built its own specific design methods to focus mainly on the management of complexity through the establishment of abstraction levels, the emergence of device heterogeneity requires new approaches enabling the satisfactory design of physically heterogeneous embedded systems for the widespread deployment of such systems. This book, compiled largely from a set of contributions from participants of past editions of the Winter School on Heterogeneous Embedded Systems Design Technology (FETCH), proposes a broad and holistic overview of design techniques used to tackle the various facets of heterogeneity in terms of technology and opportunities at the physical ...

  20. CRBRP sodium fire protection system design

    Energy Technology Data Exchange (ETDEWEB)

    Buttrey, K. E.

    1984-09-10

    A passive catch pan fire suppression deck system was designed. A large-scale sodium spray fire test showed that the effects of spray burning were being underestimated. A modified computer code indicated that for a design basis IHTS leak in CRBRP, the design allowables would be exceeded. A modified pipe insulation design was developed and tested. The tests and analysis indicate that the concrete temperatures, structural steel temperatures, building pressures, and aerosol releases are now all reduced to acceptable levels. (DLC)

  1. DESIGNING AN EVENT EXTRACTION SYSTEM

    Directory of Open Access Journals (Sweden)

    Botond BENEDEK

    2017-06-01

    Full Text Available In the Internet world, the amount of information available reaches very high quotas. In order to find specific information, some tools were created that automatically scroll through the existing web pages and update their databases with the latest information on the Internet. In order to systematize the search and achieve a result in a concrete form, another step is needed for processing the information returned by the search engine and generating the response in a more organized form. Centralizing events of a certain type is useful first of all for creating a news service. Through this system we are pursuing a knowledge - events from the Internet documents - extraction system. The system will recognize events of a certain type (weather, sports, politics, text data mining, etc. depending on how it will be trained (the concept it has in the dictionary. These events can be provided to the user, or it can also extract the context in which the event occurred, to indicate the initial form in which the event was embedded.

  2. Design patterns in medical imaging information systems

    Science.gov (United States)

    Hoo, Kent S., Jr.; Wong, Stephen T. C.; Laxer, Kenneth D.; Knowlton, Robert C.; Ching, Wan

    2000-05-01

    The purpose of this paper is to introduce a new and important conceptual framework of software design for the medical imaging community using design patterns. Use cases are created to summarize operational scenarios of clinicians using the system to complete certain tasks such as image segmentation. During design the Unified Modeling Language is used to translate the use cases into modeling diagrams that describe how the system functions. Next, design patterns are applied to build models that describe how software components interoperate to deliver that functionality. The software components are implemented using the Java language, CORBA architecture, and other web technologies. The biomedical image information system is used in epilepsy neurosurgical planning and diagnosis. This article proposes the use of proven software design models for solving medical imaging informatics design problems. Design patterns provide an excellent vehicle to leverage design solutions that have worked in the past to solve the problems we face in building user-friendly, reliable, and efficient information systems. This work introduces this new technology for building increasing complex medical image information systems. The rigorous application of software design techniques is essential in building information systems that are easy to use, rich in functionality, maintainable, reliable, and updatable.

  3. Communicating embedded systems software and design

    CERN Document Server

    Jard, Claude

    2013-01-01

    The increased complexity of embedded systems coupled with quick design cycles to accommodate faster time-to-market requires increased system design productivity that involves both model-based design and tool-supported methodologies. Formal methods are mathematically-based techniques and provide a clean framework in which to express requirements and models of the systems, taking into account discrete, stochastic and continuous (timed or hybrid) parameters with increasingly efficient tools. This book deals with these formal methods applied to communicating embedded systems by presenting the

  4. Introduction to thermo-fluids systems design

    CERN Document Server

    Garcia McDonald, André

    2012-01-01

    A fully comprehensive guide to thermal systems design covering fluid dynamics, thermodynamics, heat transfer and thermodynamic power cycles Bridging the gap between the fundamental concepts of fluid mechanics, heat transfer and thermodynamics, and the practical design of thermo-fluids components and systems, this textbook focuses on the design of internal fluid flow systems, coiled heat exchangers and performance analysis of power plant systems. The topics are arranged so that each builds upon the previous chapter to convey to the reader that topics are not stand-alone i

  5. Space systems computer-aided design technology

    Science.gov (United States)

    Garrett, L. B.

    1984-01-01

    The interactive Design and Evaluation of Advanced Spacecraft (IDEAS) system is described, together with planned capability increases in the IDEAS system. The system's disciplines consist of interactive graphics and interactive computing. A single user at an interactive terminal can create, design, analyze, and conduct parametric studies of earth-orbiting satellites, which represents a timely and cost-effective method during the conceptual design phase where various missions and spacecraft options require evaluation. Spacecraft concepts evaluated include microwave radiometer satellites, communication satellite systems, solar-powered lasers, power platforms, and orbiting space stations.

  6. Data base systems in electronic design engineering

    Science.gov (United States)

    Williams, D.

    1980-01-01

    The concepts of an integrated design data base system (DBMS) as it might apply to an electronic design company are discussed. Data elements of documentation, project specifications, project tracking, firmware, software, electronic and mechanical design can be integrated and managed through a single DBMS. Combining the attributes of a DBMS data handler with specialized systems and functional data can provide users with maximum flexibility, reduced redundancy, and increased overall systems performance. Although some system overhead is lost due to redundancy in transitory data, it is believed the combination of the two data types is advisable rather than trying to do all data handling through a single DBMS.

  7. HEDS-UP Mars Exploration Forum

    Science.gov (United States)

    Budden, Nancy Ann (Editor); Duke, Micheal B. (Editor)

    1998-01-01

    In the early 1990s, Duke and Budden convened a series of workshops addressing mission rationale, exploration objectives, and key constraints and issues facing human crews on Mars. The focal point was "why" the U.S. should fly humans to Mars. In the mid-1990s, strategies for a Mars mission matured and evolved, driven formally by NASA Johnson Space Center's Office of Exploration. In 1997, NASA published a report capturing the current thinking: the NASA Mars Reference Mission. In the 1997-1998 school year, HEDS-UP sponsored six universities to conduct design studies on Mars exploration, using the Reference Mission as a basis for their work. The 1998 Mars Exploration Forum presents the results of these university studies, suggesting "how" we might explore Mars, in terms of specific technical components that would enable human missions to Mars. A primary objective of the HEDS-UP Mars Exploration Forum was to provide a forum for active interaction among NASA, industry, and the university community on the subject of human missions to Mars. NASA scientists and engineers were asked to present the state of exploration for Mars mission options currently under study. This status "snapshot" of current Mars strategies set the stage for the six HEDS-UP universities to present their final design study results. Finally, a panel of industry experts discussed readiness for human missions to Mars as it pertains to the aerospace industries and technologies. A robust poster session provided the backdrop for government-industry-university discussions and allowed for feedback to NASA on the Mars Reference Mission. The common thread woven through the two days was discussion of technologies, proven and emerging, that will be required to launch, land, and sustain human crews on the Red Planet. As this decade (and indeed this millenium) draws to a close, Mars will continue to loom in our sights as the next target for human space exploration. It is our hope that the efforts of the Mars

  8. Digital television system design study

    Science.gov (United States)

    Huth, G. K.

    1976-01-01

    The use of digital techniques for transmission of pictorial data is discussed for multi-frame images (television). Video signals are processed in a manner which includes quantization and coding such that they are separable from the noise introduced into the channel. The performance of digital television systems is determined by the nature of the processing techniques (i.e., whether the video signal itself or, instead, something related to the video signal is quantized and coded) and to the quantization and coding schemes employed.

  9. Costing systems design for sustainability

    Directory of Open Access Journals (Sweden)

    Mihaela TURTUREA

    2013-10-01

    Full Text Available The aim of this article is to present an overall image of the way Accounting responds to nowadays user’s needs in relation to the quantification of the impact companies have towards the environment. Regarding this, there have been analyzed concepts like sustainable development, environmental accounting, environmental costs and there have been presented the main progress towards environmental cost identification and measurement from the perspective of Activity Based Costing system. To provide an overall image of this concepts, there have been used as research methodology methods the documentation from literature review, analysis, synthesis and comparison.

  10. Vehicle systems design optimization study

    Energy Technology Data Exchange (ETDEWEB)

    Gilmour, J. L.

    1980-04-01

    The optimization of an electric vehicle layout requires a weight distribution in the range of 53/47 to 62/38 in order to assure dynamic handling characteristics comparable to current production internal combustion engine vehicles. It is possible to achieve this goal and also provide passenger and cargo space comparable to a selected current production sub-compact car either in a unique new design or by utilizing the production vehicle as a base. Necessary modification of the base vehicle can be accomplished without major modification of the structure or running gear. As long as batteries are as heavy and require as much space as they currently do, they must be divided into two packages - one at front under the hood and a second at the rear under the cargo area - in order to achieve the desired weight distribution. The weight distribution criteria requires the placement of batteries at the front of the vehicle even when the central tunnel is used for the location of some batteries. The optimum layout has a front motor and front wheel drive. This configuration provides the optimum vehicle dynamic handling characteristics and the maximum passsenger and cargo space for a given size vehicle.

  11. Laser and photonic systems design and integration

    CERN Document Server

    Nof, Shimon Y; Cheng, Gary J

    2014-01-01

    New, significant scientific discoveries in laser and photonic technologies, systems perspectives, and integrated design approaches can improve even further the impact in critical areas of challenge. Yet this knowledge is dispersed across several disciplines and research arenas. Laser and Photonic Systems: Design and Integration brings together a multidisciplinary group of experts to increase understanding of the ways in which systems perspectives may influence laser and photonic innovations and application integration.By bringing together chapters from leading scientists and technologists, ind

  12. Power Systems Design for Long Duration Ballooning

    Science.gov (United States)

    Stilwell, Bryan; Chuzel, Alain

    2016-01-01

    The Columbia Scientific Balloon Facility has been designing and building high-altitude balloon power systems for over 26 years. With that experience, we have found certain types of PV panels, batteries, and charge controllers that are reliable in stratospheric environments. The ultimate goal is to ensure that power systems will provide power reliably throughout the duration of an LDB flight. The purpose of this presentation is to provide some general guidelines and best practices for power system design.

  13. Meeting report: Global vaccine and immunization research forum.

    Science.gov (United States)

    Ford, Andrew Q; Touchette, Nancy; Fenton Hall, B; Hwang, Angela; Hombach, Joachim

    2018-02-08

    Building on the success of the first Global Vaccine and Immunization Research Forum (GVIRF), the World Health Organization, the National Institute of Allergy and Infectious Diseases, part of the National Institutes of Health in the United States of America, and the Bill & Melinda Gates Foundation convened the second GVIRF in March 2016. Leading scientists, vaccine developers, and public health officials from around the world discussed scientific advances and innovative technologies to design and deliver vaccines as well as novel tools and approaches to increase the uptake of vaccines throughout the world. This report summarizes the discussions and conclusions from the forum participants. Copyright © 2018.

  14. Cost Optimal System Identification Experiment Design

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning

    A structural system identification experiment design method is formulated in the light of decision theory, structural reliability theory and optimization theory. The experiment design is based on a preposterior analysis, well-known from the classical decision theory. I.e. the decisions concerning...... reflecting the cost of the experiment and the value of obtained additional information. An example concerning design of an experiment for parametric identification of a single degree of freedom structural system shows the applicability of the experiment design method.......A structural system identification experiment design method is formulated in the light of decision theory, structural reliability theory and optimization theory. The experiment design is based on a preposterior analysis, well-known from the classical decision theory. I.e. the decisions concerning...

  15. LLW Forum meeting report, April 25--27, 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    The Low-Level radioactive Waste Forum is an association of representatives of states and compacts established to facilitate state and compact commission implementation of the Low-Level Radioactive Waste Policy Act of 1980 and the Low-Level Radioactive Waste Policy Amendments Act of 1985 and to promote the objectives of low-level radioactive waste regional compacts. The Forum provides an opportunity for states and compacts to share information with one another and to exchange views with officials of federal agencies. LLW Forum participants include representatives from regional compacts, designated host states, unaffiliated states, and states with currently-operating low-level radioactive waste facilities. This quarterly meeting was held April 25-27, 1994 and activities during the first quarter of 1994 are detailed..

  16. LLW Forum meeting report, January 24--26 1990

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-12-31

    The Low-Level Radioactive waste Forum is an association of representatives of states and compacts established to facilitate state and compact commission implementation of the Low-Level Radioactive Waste Policy Act of 1980 and the Low-Level Radioactive Waste Policy Amendments Act of 1985 and to promote the objectives of low-level radioactive waste regional compacts. The Forum provides an opportunity for states and compacts to share information with one another and to exchange views with officials of federal agencies. LLW Forum participants include representatives from regional compacts, designated host states, unaffiliated states, and states with currently-operating low-level radioactive waste facilities. This quarterly meeting was held January 24-26, 1990.

  17. Sedimentation process and design of settling systems

    CERN Document Server

    De, Alak

    2017-01-01

    This book is designed to serve as a comprehensive source of information of sedimentation processes and design of settling systems, especially as applied to design of such systems in civil and environmental engineering. The book begins with an introduction to sedimentation as a whole and goes on to cover the development and details of various settling theories. The book traces the chronological developments of the comprehensive knowledge of settling studies and design of settling systems from 1889.A new concept of 'Velocity Profile Theorem', tool for settling problem analysis, has been employed to the analysis of the phenomenon of short circuiting. Complete theory of tube settling has been developed and its application to the computation of residual solids from the assorted solids through the same has been demonstrated. Experimental verification of the tube settling theory has also been presented. Field-oriented compatible design and operation methodology of settling system has been developed from the detailed...

  18. Patterns of Emoticon Usage in ESL Students' Discussion Forum Writing

    Science.gov (United States)

    Halvorsen, Andy

    2012-01-01

    This mixed-methods study looks at patterns of emoticon usage in adult, ESL student writing. Data are drawn from 13 students and their participation in online discussion forums designed to supplement a traditional ESL writing course. The study conceptualizes computer mediated communication as a hybridized and emergent form which utilizes features…

  19. The Effect of Using Online Discussion Forums on Students' Learning

    Science.gov (United States)

    Alzahrani, Majed Gharmallah

    2017-01-01

    This study was conducted to investigate the effect of using online discussion forums (ODFs) on students' learning, particularly on their achievement. In order to achieve this, a quasi-experimental design was implemented during one academic semester at one of the leading universities in Saudi Arabia. The sample of this study involved undergraduate…

  20. The Deficit and the Federal Budget. 1983 National Issues Forum.

    Science.gov (United States)

    Melville, Keith, Ed.

    Although designed for participants in the National Issues Forum, this booklet, which describes the impact of the federal deficit and the federal budget process, is also useful for secondary school social studies. The six sections begin with an introduction describing why the deficit grows yearly and why it is difficult for Congress to stop its…

  1. Flight Path Recovery System (FPRS) design study

    Energy Technology Data Exchange (ETDEWEB)

    1978-09-01

    The study contained herein presents a design for a Flight Path Recovery System (FPPS) for use in the NURE Program which will be more accurate than systems presently used, provide position location data in digital form suitable for automatic data processing, and provide for flight path recovery in a more economic and operationally suitable manner. The design is based upon the use of presently available hardware and technoloy, and presents little, it any, development risk. In addition, a Flight Test Plan designed to test the FPRS design concept is presented.

  2. Design Methodologies for Secure Embedded Systems

    CERN Document Server

    Biedermann, Alexander

    2011-01-01

    Embedded systems have been almost invisibly pervading our daily lives for several decades. They facilitate smooth operations in avionics, automotive electronics, or telecommunication. New problems arise by the increasing employment, interconnection, and communication of embedded systems in heterogeneous environments: How secure are these embedded systems against attacks or breakdowns? Therefore, how can embedded systems be designed to be more secure? And how can embedded systems autonomically react to threats? Facing these questions, Sorin A. Huss is significantly involved in the exploration o

  3. The design of remote temperature monitoring system

    Science.gov (United States)

    Li, Biqing; Li, Zhao; Wei, Liuren

    2017-08-01

    This design is made on the basis of the single-chip microcomputer remote temperature monitoring system. STC89C51RC is the main core part, this design use the sensor DHT11 of temperature or humidity and wireless transceiver NRF24L01 the temperature of the test site for long-range wireless measurement and monitoring. The design contains the main system and the small system, of which the main system can show the actual test site temperature and humidity values, voice broadcast, out of control and receive data alarm function; The small system has the function of temperature and humidity, temperature monitoring and sending data. After debugging, the user customizable alarm upper and lower temperature, when the temperature exceeds limit value, the main system of buzzer alarm immediately. The system has simple structure, complete functions and can alarm in time, it can be widely used remote temperature acquisition and monitoring of the site.

  4. Nanoscale science and engineering forum (706c) design of solid lipid particles with iron oxide quantum dots for the delivery of therapeutic agents

    Science.gov (United States)

    Solid lipid particles provide a method to encapsulate and control the release of drugs in vivo but lack the imaging capability provided by CdS quantum dots. This shortcoming was addressed by combining these two technologies into a model system that uses iron oxide as a non-toxic imaging component in...

  5. Context-aware system design

    Science.gov (United States)

    Chan, Christine S.; Ostertag, Michael H.; Akyürek, Alper Sinan; Šimunić Rosing, Tajana

    2017-05-01

    The Internet of Things envisions a web-connected infrastructure of billions of sensors and actuation devices. However, the current state-of-the-art presents another reality: monolithic end-to-end applications tightly coupled to a limited set of sensors and actuators. Growing such applications with new devices or behaviors, or extending the existing infrastructure with new applications, involves redesign and redeployment. We instead propose a modular approach to these applications, breaking them into an equivalent set of functional units (context engines) whose input/output transformations are driven by general-purpose machine learning, demonstrating an improvement in compute redundancy and computational complexity with minimal impact on accuracy. In conjunction with formal data specifications, or ontologies, we can replace application-specific implementations with a composition of context engines that use common statistical learning to generate output, thus improving context reuse. We implement interconnected context-aware applications using our approach, extracting user context from sensors in both healthcare and grid applications. We compare our infrastructure to single-stage monolithic implementations with single-point communications between sensor nodes and the cloud servers, demonstrating a reduction in combined system energy by 22-45%, and multiplying the battery lifetime of power-constrained devices by at least 22x, with easy deployment across different architectures and devices.

  6. Designing Systems for E-Commerce

    Directory of Open Access Journals (Sweden)

    Shona Leitch

    2003-05-01

    Full Text Available Ethics is an important element in all aspects of computing, but proves to be a real problem in the development and delivery of E-Commerce systems. There are many aspects of ethics that can affect E-Commerce systems, but often research is focused on the ethics after the E-Commerce system has been implemented, focusing on issues such as trust, privacy and disclosure. This paper will discuss how ethical matters can affect the design of E-Commerce systems and how a framework designed for E-Commerce can be used to create and deliver effective, ethical E-Commerce systems.

  7. OPTIMUM HEAT STORAGE DESIGN FOR SDHW SYSTEMS

    DEFF Research Database (Denmark)

    Shah, Louise Jivan; Furbo, Simon

    1997-01-01

    Two simulation models have been used to analyse the heat storage design’s influence on the thermal performance of solar domestic hot water (SDHW) systems. One model is especially designed for traditional SDHW systems based on a heat storage design where the solar heat exchanger is a built-in spiral....... The other model is especially designed for low flow SDHW systems based on a mantle tank.The tank design’s influence on the thermal performance of the SDHW systems has been investigated in a way where only one tank parameter has been changed at a time in the calculations. In this way a direct analysis...... of the tank design’s influence on the thermal performance of the systems is possible. By means of the calculations design rules for the two heat storage types are proposed....

  8. Mechatronic Systems Analysis, Design and Implementation

    CERN Document Server

    Boukas, El-Kébir

    2012-01-01

    This book deals with the analysis, the design and the implementation of the mechatronic systems. Classical and modern tools are developed for the analysis and the design for such systems. Robust control, H-Infinity and guaranteed cost control theory are also used for analysis and design of mechatronic systems. Different controller such as state feedback, static output feedback and dynamic output feedback controllers are used to stabilize mechatronic systems. Heuristic algorithms are provided to solve the design of the classical controller such as PID, phase lead, phase lag and phase lead-lag controllers while linear matrix inequalities (LMI) algorithms are provided for finding solutions to the state feedback, static output feedback and dynamic output feedback controllers. The theory presented in the different chapters of the volume is applied to numerical examples to show the usefulness of the theoretical results. Some case studies are also provided to show how the developed concepts apply for real system. Em...

  9. System-of-Systems Design Thinking on Behavior

    Directory of Open Access Journals (Sweden)

    Christian Stary

    2017-01-01

    Full Text Available Due to the increasing digitalization of all societal systems, informed design of services and systems becomes pertinent for various stakeholders. This paper discusses the design of digital systems in a user-centered way with the help of subject-oriented design. The approach follows a communication-driven and network-centric perspective on a System-of-Systems, whereby system specifications encapsulate behavior and exchange messages, including relevant data, such as business objects. Systems can represent activities of human actors, as well as artefacts. Stakeholders can be actively involved in their roles in the design of a System-of-Systems. In the course of design, they identify and refine role-specific behavior, based on communication to other actors or systems. A System-of-Systems specification evolves as a network of cooperating behavior entities. It develops according to communication needs and system-specific capabilities, on the level of synchronized execution agents, or as an overlay mechanism on existing applications or sub networks. Since certain behavior sequences, such as decision-making procedures, are re-occurring in organizations or eco-systems, the design of complex systems can be facilitated by behavior patterns stemming from existing modeling experiences.

  10. Preliminary design of a future integrated design system

    Science.gov (United States)

    Diggins, R. M.

    1980-01-01

    IPAD is a system of computer programs and data supporting the aerospace-vehicle design process by providing a set of services to aid in the management of a design project, project technical work, and project support work. Its purpose is to integrate people, programs, and data into a unified aerospace-vehicle design system. All project-management and technical data, together with certain standard data, are stored in a data base. The IPAD functions allow project personnel to query the data base and to perform operations on the data. This permits the orderly sequencing of the task elements of a complex operation and provides common access to a single data base by various participating groups who otherwise would require many separate files. These capabilities will be provided on a single host computer or across multiple heterogeneous computers on a distributed progress basis.

  11. Efficient Design Methods for Embedded Communication Systems

    Directory of Open Access Journals (Sweden)

    Holzer M

    2006-01-01

    Full Text Available Nowadays, design of embedded systems is confronted with complex signal processing algorithms and a multitude of computational intensive multimedia applications, while time to product launch has been extremely reduced. Especially in the wireless domain, those challenges are stacked with tough requirements on power consumption and chip size. Unfortunately, design productivity did not undergo a similar progression, and therefore fails to cope with the heterogeneity of modern architectures. Electronic design automation tools exhibit deep gaps in the design flow like high-level characterization of algorithms, floating-point to fixed-point conversion, hardware/software partitioning, and virtual prototyping. This tutorial paper surveys several promising approaches to solve the widespread design problems in this field. An overview over consistent design methodologies that establish a framework for connecting the different design tasks is given. This is followed by a discussion of solutions for the integrated automation of specific design tasks.

  12. Efficient Design Methods for Embedded Communication Systems

    Directory of Open Access Journals (Sweden)

    M. Rupp

    2006-06-01

    Full Text Available Nowadays, design of embedded systems is confronted with complex signal processing algorithms and a multitude of computational intensive multimedia applications, while time to product launch has been extremely reduced. Especially in the wireless domain, those challenges are stacked with tough requirements on power consumption and chip size. Unfortunately, design productivity did not undergo a similar progression, and therefore fails to cope with the heterogeneity of modern architectures. Electronic design automation tools exhibit deep gaps in the design flow like high-level characterization of algorithms, floating-point to fixed-point conversion, hardware/software partitioning, and virtual prototyping. This tutorial paper surveys several promising approaches to solve the widespread design problems in this field. An overview over consistent design methodologies that establish a framework for connecting the different design tasks is given. This is followed by a discussion of solutions for the integrated automation of specific design tasks.

  13. USE OF A SYSTEM DESIGN ULTRAACUSTIC WELDING

    Directory of Open Access Journals (Sweden)

    Gheorghe AMZA

    2010-06-01

    Full Text Available This article presents elements of a computer modeling system and ultraacustic using analyzing finite element method used in its design. With the experimental results obtained for a system used for welding ultraacustic determine variation curve aplitudinii particle velocity along the system.

  14. Conceptual design of automated freight transport systems

    NARCIS (Netherlands)

    Pielage, B.A.

    2005-01-01

    The conceptual design of automated freight transport systems is a challenging matter. It involves many different parties, types of people and disciplines which all have to work together to develop a system which is often new and complex. Automated freight transport systems typically have a long

  15. Communication: key factor in multidisciplinary system design

    NARCIS (Netherlands)

    Bonnema, Gerrit Maarten; Borches Juzgado, P.D.; Kauw-A-Tjoe, R.G.; van Houten, Frederikus J.A.M.; Cloutier Sauser, B.; Gill, E.

    2010-01-01

    System design research often looks at ways to model the system that is developing. Many modelling techniques and model representations exist. Another aspect these models can be used for is to enable, facilitate and improve communication among the developers during the process. The young System

  16. Systems Analysis and Design: Know Your Audience

    Science.gov (United States)

    Reinicke, Bryan A.

    2012-01-01

    Systems analysis and design (SAD) classes are required in both Information Systems and Accounting programs, but these audiences have very different needs for these skills. This article will review the requirements for SAD within each of these disciplines and compare and contrast the different requirements for teaching systems analysis and design…

  17. General Systems Theory and Instructional Design.

    Science.gov (United States)

    Salisbury, David F.

    The use of general systems theory in the field of instructional systems design (ISD) is explored in this paper. Drawing on work by Young, the writings of 12 representative ISD writers and researchers were surveyed to determine the use of 60 general systems theory concepts by the individual authors. The average number of concepts used by these…

  18. Thinking Tracks for Integrated Systems Design

    NARCIS (Netherlands)

    Bonnema, Gerrit Maarten; Denkena, B.; Gausemeijer, J.; Scholz-Reiter, B.

    2012-01-01

    The paper investigates systems thinking and systems engineering. After a short literature review, the paper presents, as a means for systems thinking, twelve thinking tracks. The tracks can be used as creativity starter, checklist, and as means to investigate effects of design decisions taken early

  19. Planning and design of information systems

    CERN Document Server

    Blokdijk, André

    1991-01-01

    Planning and Design of Information Systems provides a theoretical base and a practical method of executing the planning of computerized information systems, and the planning and design of individual applications. The book is organized into five parts, covering the non-technical and nonimplementational part of information systems planning, design, and development. Part I gives the theoretical base for the subsequent parts of the book. It discusses modeling, techniques, notations, boundaries, quality issues and aspects, and decomposition techniques and problems. Part II discusses the needs, prob

  20. Microelectronic circuit design for energy harvesting systems

    CERN Document Server

    Di Paolo Emilio, Maurizio

    2017-01-01

    This book describes the design of microelectronic circuits for energy harvesting, broadband energy conversion, new methods and technologies for energy conversion. The author also discusses the design of power management circuits and the implementation of voltage regulators. Coverage includes advanced methods in low and high power electronics, as well as principles of micro-scale design based on piezoelectric, electromagnetic and thermoelectric technologies with control and conditioning circuit design. Provides a single-source reference to energy harvesting and its applications; Serves as a practical guide to microelectronics design for energy harvesting, with application to mobile power supplies; Enables readers to develop energy harvesting systems for wearable/mobile electronics.

  1. Information management systems improve advanced plant design

    Energy Technology Data Exchange (ETDEWEB)

    Turk, R.S.; Serafin, S.A.; Leckey, J.B. [ABB-Combustion Engineering, Inc., Windsor, CT (United States); Morgan, J.S. [Duke Engineering & Services, Charlotte, NC (United States)

    1994-12-31

    Computer-aided engineering tools are proving invaluable in both the design and operation of nuclear power plants. ABB Combustion Engineering`s Advanced Light Water Reactor (ALWR) features a computerized Information Management System (IMS) as an integral part of the design. The System 80+ IMS represents the most powerful information management tool for Nuclear Power Plants commercially available today. Developed by Duke Power Company specifically for use by nuclear power plant owner operators, the IMS consists of appropriate hardware and software to manage and control information flow for all plant related work or tasks in a systematic, consistent, coordinated and informative manner. A significant feature of this IMS is that it is primarily based on plant data. The principal design tool, PASCE (Plant Application and Systems from Combustion Engineering), is comprised of intelligent databases that describe the design and from which accurate plant drawings are created. Additionally the IMS includes, at its hub, a relational database management system and an associated document management system. During the design phase, the IMS captures all design information in a database as it is generated. Interrelated data are automatically checked for consistency. Engineers and managers from various disciplines are automatically and simultaneously notified of pending changes. The 3-D model automatically checks for interferences and can be used to simulate the removal and replacement of equipment. Thus any potential difficulties can be corrected in the design phase. Document and data search times are greatly reduced by the querying capabilities of the system.

  2. Solar heating system final design package

    Science.gov (United States)

    1979-01-01

    The system is composed of a warm air collector, a logic control unit and a universal switching and transport unit. The collector was originally conceived and designed as an integrated roof/wall system and therefore provides a dual function in the structure. The collector serves both as a solar energy conversion system and as a structural weather resistant skin. The control unit provides totally automatic control over the operation of the system. It receives input data from sensor probes in collectors, storage and living space. The logic was designed so as to make maximum use of solar energy and minimize use of conventional energy. The transport and switching unit is a high-efficiency air-handling system equipped with gear motor valves that respond to outputs from the control system. The fan unit was designed for maximum durability and efficiency in operation, and has permanently lubricated ball bearings and excellent air-handling efficiency.

  3. Modeling Adaptive Behavior for Systems Design

    DEFF Research Database (Denmark)

    Rasmussen, Jens

    1994-01-01

    of the predictive models required for the design of work supports systems, that is,information systems serving as the human-work interface. Three basic issues are in focus: 1.) Some fundamental problems in analysis and modeling modern dynamic work systems caused by the adaptive nature of human behavior; 2......Field studies in modern work systems and analysis of recent major accidents have pointed to a need for better models of the adaptive behavior of individuals and organizations operating in a dynamic and highly competitive environment. The paper presents a discussion of some key characteristics.......) The basic difference between the models of system functions used in engineering and design and those evolving from basic research within the various academic disciplines and finally 3.) The models and methods required for closed-loop, feedback system design....

  4. System design specification Brayton Isotope Power System (BIPS) Flight System (FS), and Ground Demonstration System (GDS)

    Energy Technology Data Exchange (ETDEWEB)

    1976-06-14

    The system design specification for ground demonstration, development, and flight qualification of a Brayton Isotope Power System (BIPS) is presented. The requirements for both a BIPS conceptual Flight System (FS) and a Ground Demonstration System (GDS) are defined.

  5. System design document for the INFLO prototype.

    Science.gov (United States)

    2014-03-01

    This report documents the high level System Design Document (SDD) for the prototype development and : demonstration of the Intelligent Network Flow Optimization (INFLO) application bundle, with a focus on the Speed : Harmonization (SPD-HARM) and Queu...

  6. Technical Design of Flexible Sustainable Energy Systems

    DEFF Research Database (Denmark)

    Lund, Henrik

    2003-01-01

    The paper presents technical designs of potential future flexible energy systems in Denmark, which will be able both to balance production and demand and to secure voltage and frequency requirements on the grid....

  7. Transceiver and system design for digital communications

    CERN Document Server

    Bullock, Scott R

    2017-01-01

    This applied engineering reference covers a wide range of wireless communication design techniques; including link budgets, error detection and correction, adaptive and cognitive techniques, and system analysis of receivers and transmitters.

  8. Design study: fishing vessel technical information system

    National Research Council Canada - National Science Library

    Park, C.H

    1979-01-01

    ... out. This study is primarily concerned with the design of a Fishing Vessel Technical Information System that will meet the requirements of the Department, and the determination of a schedule and means of data collection and management.

  9. Design Flaws and Service System Breakdowns: Learning from Systems Thinking

    Directory of Open Access Journals (Sweden)

    David Ing

    2014-12-01

    Full Text Available In what ways might systems thinking be helpful to designers?  In the 21st century, the types of project with which designers have become engaged has expanded to include service systems.  Service systems are typically composites of mechanisms, organisms, human beings and ecologies.  Systems thinking is a perspective with theories, methods and practices that enables transcending disciplinary boundaries.  Application of systems thinking in designing a service system can aid in surfacing potential flaws and/or anticipating future breakdowns in functions, structures and/or processes. Designers and systems thinkers should work together to improve the nature of service systems.  As a starter set into these conversations, seven conditions are proposed as a starting context.  These conditions are presented neither as rigourously defined nor as exhaustive, but as an entry point into future joint engagement.

  10. Designing and Conducting Health Systems Research Projects ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Designing and Conducting Health Systems Research Projects Volume 2 : Data Analyses and Report Writing. Book cover Designing and Conducting Health ... Ebola Crisis: Improving Science-Based Communication and Local Journalism in Emergency and Post-outbreak Periods. The World Federation of Science Journalists ...

  11. Designing Systems for E-Commerce

    OpenAIRE

    Shona Leitch; Matthew Warren

    2003-01-01

    Ethics is an important element in all aspects of computing, but proves to be a real problem in the development and delivery of E-Commerce systems. There are many aspects of ethics that can affect E-Commerce systems, but often research is focused on the ethics after the E-Commerce system has been implemented, focusing on issues such as trust, privacy and disclosure. This paper will discuss how ethical matters can affect the design of E-Commerce systems and how a framework designed for E-Com...

  12. Optical Design Using an Expert System

    Energy Technology Data Exchange (ETDEWEB)

    Lerner, S A

    2003-08-01

    We present, as a different perspective on optimization, an expert system for optimization of optical systems that can be used in conjunction with damped least squared methods to find minima for specific design forms. Expert system optimization differs from global optimization in that it preserves the basic structure of the optical system and limits its search for a minima to a relatively small portion of the design space. In general, the high density of local minima obscures the general trend of the merit function in the region of interest for systems with a large number of variables and constraints. Surprisingly, there may be a potential decrease of an order a magnitude in the merit function for a region of solution space. While global optimization is well-suited to identifying design forms of interest, expert system optimization can be used for in-depth optimization of such forms. An expert system based upon such techniques was used to obtain the winning entry for the 2002 IODC lens design problem. The expert system used is discussed along with other design examples.

  13. Relating Systems Thinking and Design II. Theoretical Evolution in Systemic Design

    OpenAIRE

    Peter Jones

    2014-01-01

    We have joined two issues of FORMakademisk to accommodate two sets of articles developed from remarkable early work presented at the 2013 Relating Systems Thinking to Design Symposium in Oslo. We organized these papers into a theory set, and a set for practice of systemic design, although most of these theoretical works are deeply informed by design and planning practices. The theory issue, Theoretical Evolution in Systemic Design, comprises the perspectives of scholars contributing new work ...

  14. Design of Galilean-type telescope systems.

    Science.gov (United States)

    Menchaca, C; Malacara, D

    1988-09-01

    In this paper we present the design of three Galilean-type telescope systems with magnifications of 2.2x, 4x, and 5x. These systems are free of the large weight and length as well as the reduced field of view, which are frequent undesirable properties of Galilean telescopes. These designs have a moderate field of view and a short length, with reasonably good aberration correction, and may be used as binocular telescopes or magnifiers with a large working distance.

  15. Thinking Tracks for Integrated Systems Design

    OpenAIRE

    Bonnema, Gerrit Maarten; Denkena, B.; Gausemeijer, J.; Scholz-Reiter, B.

    2012-01-01

    The paper investigates systems thinking and systems engineering. After a short literature review, the paper presents, as a means for systems thinking, twelve thinking tracks. The tracks can be used as creativity starter, checklist, and as means to investigate effects of design decisions taken early in the process. Tracks include thinking about time, risk and safety, and different types of life-cycles. The thinking tracks are based on literature, teaching experience and practice as a system de...

  16. Waste receiving and processing plant control system; system design description

    Energy Technology Data Exchange (ETDEWEB)

    LANE, M.P.

    1999-02-24

    The Plant Control System (PCS) is a heterogeneous computer system composed of numerous sub-systems. The PCS represents every major computer system that is used to support operation of the Waste Receiving and Processing (WRAP) facility. This document, the System Design Description (PCS SDD), includes several chapters and appendices. Each chapter is devoted to a separate PCS sub-system. Typically, each chapter includes an overview description of the system, a list of associated documents related to operation of that system, and a detailed description of relevant system features. Each appendice provides configuration information for selected PCS sub-systems. The appendices are designed as separate sections to assist in maintaining this document due to frequent changes in system configurations. This document is intended to serve as the primary reference for configuration of PCS computer systems. The use of this document is further described in the WRAP System Configuration Management Plan, WMH-350, Section 4.1.

  17. Ambient Assisted Living : Italian forum 2013

    CERN Document Server

    Siciliano, Pietro; Germani, Michele; Monteriù, Andrea

    2014-01-01

    This book presents the refereed proceedings of the Fourth Italian Forum on Ambient Assisted Living (AAL), held in Ancona, Italy, in October 2013. A wide range of issues are covered, and new technological developments are described which will support the autonomy and independence of individuals with special needs through an innovative and integrated approach, designed to respond to the socio-economic challenges of an aging population. Topics addressed include: health and well-being, prevention and rehabilitation, and support for care providers; active aging and its social implications; services for the frail elderly with health problems and their families; nutrition; ICT platforms/technologies for the benefit of the elderly; home automation and control technologies (autonomy, safety, and energy saving); smart cities and smart communities; telemedicine, telerehabilitation, and telecare; mobility, participation, and social inclusion; games and fun for the elderly; building design; social housing; interface desig...

  18. Collectives and the design of complex systems

    CERN Document Server

    Wolpert, David

    2004-01-01

    Increasingly powerful computers are making possible distributed systems comprised of many adaptive and self-motivated computational agents. Such systems, when distinguished by system-level performance criteria, are known as "collectives." Collectives and the Design of Complex Systems lays the foundation for a science of collectives and describes how to design them for optimal performance. An introductory survey chapter is followed by descriptions of information-processing problems that can only be solved by the joint actions of large communities of computers, each running its own complex, decentralized machine-learning algorithm. Subsequent chapters analyze the dynamics and structures of collectives, as well as address economic, model-free, and control-theory approaches to designing complex systems. The work assumes a modest understanding of basic statistics and calculus. Topics and Features: Introduces the burgeoning science of collectives and its practical applications in a single useful volume Combines ap...

  19. Microwave Radiometer Systems, Design and Analysis

    DEFF Research Database (Denmark)

    Skou, Niels; Vine, David Le

    Two important microwave remote sensors are the radar and the radiometer. There have been a number of books written on various aspects of radar, but there have been only a few written on microwave radiometers, especially on subjects of how to design and build radiometer systems. This book, which...... is the second edition of a book originally published in 1989, attempts to fill this void. The background for this book is many years of work with radiometer systems including design and manufacture of airborne imaging radiometer systems, laboratory as well as airborne field experiments with the systems......, and design of future spaceborne imagers. This book would not have been possible without the support and encouragement of several colleagues. Søren Nørvang Madsen, who is working with synthetic aperture radar systems, and, before him, Finn søndergaard have both contributed much to the work with radiometer...

  20. Optimized Experiment Design for Marine Systems Identification

    DEFF Research Database (Denmark)

    Blanke, M.; Knudsen, Morten

    1999-01-01

    and proposes a sensitivity approach to solve the practical experiment design problem. The applicability of the sensitivity approach is demonstrated on a large non-linear model of surge, sway, roll and yaw of a ship. The use of the method is illustrated for a container-ship where both model and full-scale tests......Simulation of maneuvring and design of motion controls for marine systems require non-linear mathematical models, which often have more than one-hundred parameters. Model identification is hence an extremely difficult task. This paper discusses experiment design for marine systems identification...

  1. Theory and design of CNC systems

    CERN Document Server

    Suh, Suk-Hwan; Chung, Dae-Hyuk; Stroud, Ian

    2008-01-01

    Computer Numerical Control (CNC) controllers are high value-added products counting for over 30% of the price of machine tools. The development of CNC technology depends on the integration of technologies from many different industries, and requires strategic long-term support. a oeTheory and Design of CNC Systemsa covers the elements of control, the design of control systems, and modern open-architecture control systems. Topics covered include Numerical Control Kernel (NCK) design of CNC, Programmable Logic Control (PLC), and the Man-Machine Interface (MMI), as well as the major modules for t

  2. Microprocessor system design a practical introduction

    CERN Document Server

    Spinks, Michael J

    2013-01-01

    Microprocessor System Design: A Practical Introduction describes the concepts and techniques incorporated into the design of electronic circuits, particularly microprocessor boards and their peripherals. The book reviews the basic building blocks of the electronic systems composed of digital (logic levels, gate output circuitry) and analog components (resistors, capacitors, diodes, transistors). The text also describes operational amplifiers (op-amp) that use a negative feedback technique to improve the parameters of the op-amp. The design engineer can use programmable array logic (PAL) to rep

  3. Lectures in feedback design for multivariable systems

    CERN Document Server

    Isidori, Alberto

    2017-01-01

    This book focuses on methods that relate, in one form or another, to the “small-gain theorem”. It is aimed at readers who are interested in learning methods for the design of feedback laws for linear and nonlinear multivariable systems in the presence of model uncertainties. With worked examples throughout, it includes both introductory material and more advanced topics. Divided into two parts, the first covers relevant aspects of linear-systems theory, the second, nonlinear theory. In order to deepen readers’ understanding, simpler single-input–single-output systems generally precede treatment of more complex multi-input–multi-output (MIMO) systems and linear systems precede nonlinear systems. This approach is used throughout, including in the final chapters, which explain the latest advanced ideas governing the stabilization, regulation, and tracking of nonlinear MIMO systems. Two major design problems are considered, both in the presence of model uncertainties: asymptotic stabilization with a “...

  4. Young physicists' forum

    Energy Technology Data Exchange (ETDEWEB)

    T. Adams et al.

    2001-11-02

    The Young Physicists' Forum was an opportunity for the younger members of the particle-physics community to gather at Snowmass 2001 and to study and debate major issues that face the field over the next twenty years. Discussions were organized around three major topics: outreach and education, the impact of globalization, and building a robust and balanced field. We report on the results of these discussions, as presented on July 17, 2001.

  5. [Social media: forum webcare as a proactive information strategy in health promotion: Results of a pilot project by the BZgA].

    Science.gov (United States)

    Quast, T; Nöcker, Guido

    2015-09-01

    Over several weeks in 2013, the BZgA pilot project "SoMe" (August 2012 to February 2014) tested and investigated various social media interventions in the fields of family planning and sex education. The interventions included the tool "forum webcare," which was used in four forums for pregnant women and three for young people. The term webcare originally described a customer-oriented communication strategy of the web economy. The term includes elements of reputation management, customer care, and online marketing. In the present pilot project, forum webcare has been understood and applied in the sense of "virtual street work," which means that issues on health topics in non-self-operated forums were identified and answered. The design was based on the Precede-Proceed Model. In the phases of analysis, implementation, and evaluation the project used chronologically and methodologically interlaced and mutually controlling methods such as online test groups, intensive interviews, and the evaluation of data on web use. The analysis indicated that the target groups of the project used the forums quite often; that they had a positive attitude toward the idea of webcare providing contributions from experts working for public institutions; and that the risk of reactance was low. Forum webcare allows important supplementary and well-founded information to be brought into the discussions. At the same time the results of the project show that users, when keeping to certain rules, mostly see webcare as a welcome addition to incomplete information and the improvement of faulty information, and appreciate it as quality enhancement for the forum. From the view of the information provider, forum webcare is more a chance to address numerous passive recipients rather than communicating with single users. At the same time the instrument provides the chance to learn from users of the forums, and to become familiar with and be able to respond to their needs and the way in which they

  6. Design Requirements for Designing Responsive Modular Manufacturing Systems

    DEFF Research Database (Denmark)

    Jørgensen, Steffen; Madsen, Ole; Nielsen, Kjeld

    2011-01-01

    the needed flexibility and responsiveness, but such systems are not yet fully achieved. From related theory it is known that achieving modular benefits depend on the modular architecture; a modular architecture which must be developed according to the customer needs. This makes production needs a design...... and industrial work are conducted in this area and has resulted in a wide span of theories, models, and methods. Manufacturing companies are, regardless hereon, still facing these challenges, especially regarding their manufacturing systems. Several theories state that modular manufacturing concepts possess...... requirement in order to achieve responsiveness and other benefits of modular manufacturing systems (MMS). Due to the complex and interrelated nature of a production system and its surroundings these production needs are complex to identify. This paper presents an analysis framework for identification...

  7. SYSTEMS APPROACH TO DESIGN OF BUILDINGS DESIGNATED FOR DIPLOMATIC MISSIONS

    OpenAIRE

    Istomin Boris Semenovich; Razin Andrey Dionisovich

    2012-01-01

    The article covers the design of buildings of diplomatic missions as sophisticated, multi-functional networks of buildings and structures. Their constituents (rooms) have up to 100 different options each of which serves a particular function (namely, lobbies, reception areas, guest rooms, halls, dining rooms, offices, flats, toilets, etc.) that may be clustered into four functional groups: diplomatic missions, official areas, residential areas, service areas. The systems approach to the p...

  8. The Design of Document Information Systems.

    Science.gov (United States)

    Rosman, G.; And Others

    1996-01-01

    Presents costs and benefits of document information systems as well as a design methodology. Highlights include the method of working, method of modelling, multiple data types, access structure and indexing, and a case study of the implementation of a document information system in the Netherlands. (Author/LRW)

  9. [Design of a medical equipment purchasing system].

    Science.gov (United States)

    Zeng, Li; Chen, Xiao-hua

    2008-09-01

    This paper introduces the network data dynamic exchange technology applied to the design of the medical equipment purchase system according to the process of the medical equipment purchasing. The new system adopts B/S structure based on .net technology, to realize the medical equipment purchasing information's dynamic management of network purchase application and verification, suppliers qualification examination and the contact file inquiry etc.

  10. Biometric systems technology, design and performance evaluation

    CERN Document Server

    Wayman, James; Maltoni, Davide

    2005-01-01

    A reference book for anyone involved in the design, management or implementation of biometric systems, and provides all the information needed to a build reliable system. It focuses on the four most widely used types of biometric technology - speech, fingerprint, iris and face recognition.

  11. Mechatronic System Design Course for Undergraduate Programmes

    Science.gov (United States)

    Saleem, A.; Tutunji, T.; Al-Sharif, L.

    2011-01-01

    Technology advancement and human needs have led to integration among many engineering disciplines. Mechatronics engineering is an integrated discipline that focuses on the design and analysis of complete engineering systems. These systems include mechanical, electrical, computer and control subsystems. In this paper, the importance of teaching…

  12. Design of Agricultural Cleaner Production Technology System

    OpenAIRE

    Hu, Jun-Mei; Wang, Xin-Jie

    2009-01-01

    Based on the introduction of agricultural cleaner production, technology system design of planting cleaner production is discussed from five aspects of water-saving irrigation technology, fertilization technology, diseases and insects control technology, straw comprehensive utilization technology and plastic film pollution control technology. Cleaner production technology system of livestock and poultry raise is constructed from the aspects of source control technology, reduction technique in...

  13. Design data brochure: SIMS prototype system 2

    Energy Technology Data Exchange (ETDEWEB)

    1977-12-01

    Information is provided on the design and performance of the IBM SIMS Prototype System 2, solar domestic hot water system, for single family residences. The document provides sufficient data to permit procurement, installation, operation, and maintenance by qualified architectural engineers or contractors.

  14. Design and installation of earth energy systems

    Energy Technology Data Exchange (ETDEWEB)

    Loggia, S.; Adragna, M.; Coyle, S.; Foley, C.; Hawryn, S.; Martin, A.; McConnell, J. (eds.)

    2002-07-01

    This first edition of the Canadian Standards Association (CSA) Standard C448 Series, replaces CSA Standards CAN/CSA-C445-M92 entitled Design and Installation of Earth Energy Heat Pump Systems for Residential and Other Small Buildings, as well as C447-94 entitled Design and Installation of Earth Energy Heat Pump Systems for Commercial and Institutional Buildings. This standard document consists of three parts: (C448.1) Design and installation of earth energy systems for commercial and institutional buildings; (C448.2) Design and installation of earth energy systems for residential and small buildings; and, (C448.3) Design and installation of underground thermal energy storage systems for commercial and institutional buildings. In C448.1, the requirements applicable to any system falling within the scope of the C448 series were included. Alternative requirements for houses and small buildings were added in C448.2. It was noted that either standard may be implemented. The standards applicable to the intentional storage of energy in the earth for later use were presented in C448.3. This latter section includes a brief introduction on underground thermal energy storage (UTES). tabs.

  15. Wind energy systems control engineering design

    CERN Document Server

    Garcia-Sanz, Mario

    2012-01-01

    IntroductionBroad Context and MotivationConcurrent Engineering: A Road Map for EnergyQuantitative Robust ControlNovel CAD Toolbox for QFT Controller DesignOutline Part I: Advanced Robust Control Techniques: QFT and Nonlinear SwitchingIntroduction to QFTQuantitative Feedback TheoryWhy Feedback? QFT OverviewInsight into the QFT TechniqueBenefits of QFTMISO Analog QFT Control SystemIntroductionQFT Method (Single-Loop MISO System)Design Procedure OutlineMinimum-Phase System Performance SpecificationsJ LTI Plant ModelsPlant Templates of P?(s), P( j_i )Nominal PlantU-Contour (Stability Bound)Trackin

  16. Control system design of active seat suspensions

    Science.gov (United States)

    Maciejewski, I.

    2012-03-01

    This paper presents an approach to the control system design of seat suspension systems for the active vibration attenuation. The paper presents the studies of the active vibration control strategy based on the reverse dynamics of force actuator and the primary controller. The multi-criteria optimization procedure is utilized in order to calculate the primary controller settings which subsequently define the vibro-isolation characteristics of active suspensions. As an example of the proposed control system design, the seat with a pneumatic suspension is investigated and its vibro-isolation properties are shaped by an appropriate selection of the controller settings.

  17. Design of Grain Dryers’ Control System

    Science.gov (United States)

    Li, Shizhuang; Cao, Shukun; Meng, Wenjing

    2017-06-01

    TMS320F28335 which is a TI high-performance TMS320C28x series 32-bit floating point DSP processor is used as the core of the controller, and the hardware is designed, which includes temperature collection, temperature and humidity collection, moisture detection and motor control. The development environment of the system CCS, and then for the characteristics of grain dryer control system, the control system software modular design, the use of fuzzy control method to achieve food grain motor control, and MATLAB simulation analysis, Fuzzy control is used to control the feasibility of the grain moisture.

  18. ENRICH Forum: Ethical aNd Regulatory Issues in Cancer ResearcH

    Science.gov (United States)

    ENRICH Forum: Ethical aNd Regulatory Issues in Cancer ResearcH, designed to stimulate dialogue on ethical and regulatory issues in cancer research and promote awareness of developing policies and best practices.

  19. The design and analysis of mooring system

    Science.gov (United States)

    Li, Yixuan

    2017-05-01

    In this paper, the force status and a design method of single chain mooring system for shallow sea observation network are studied. With treating the link of a chain, steel drum and steel pipe as a rigid body, the recurrence model is established by using Newton's first law and the law of Moment equilibrium theorem. Via the simplified calculation of dichotomy searching, we determine the design parameters of mooring system, such as anchor model, anchor chain length, heavy ball quality under different water flow and wind conditions. We apply MATLAB to simulate the internal steady state of the system in the fixed scheme, water depth of buoy and swimming area to meet the decision-making needs, providing an idea for the actual scheme design of mooring system.

  20. Design for Reliability of Power Electronic Systems

    DEFF Research Database (Denmark)

    Yang, Yongheng; Wang, Huai; Sangwongwanich, Ariya

    2018-01-01

    Power density, efficiency, cost, and reliability are the major challenges when designing a power electronic system. Latest advancements in power semiconductor devices (e.g., silicon carbide devices) and topological innovations have vital contributions to power density and efficiency. Nevertheless......, dedicated heat sink systems for thermal management are required to dissipate the power losses in power electronic systems; otherwise, the power devices will be heated up and eventually fail to operate. In addition, in many mission critical applications (e.g., marine systems), the operating condition (i.......e., mission profiles) is usually harsh, where the input power can change quickly and randomly, resulting in considerable temperature swings in the power electronics. This may induce failures to the power electronic systems. If remain untreated (i.e., ill-designed system without considering reliability...

  1. Reliable computer systems design and evaluatuion

    CERN Document Server

    Siewiorek, Daniel

    2014-01-01

    Enhance your hardware/software reliabilityEnhancement of system reliability has been a major concern of computer users and designers ¦ and this major revision of the 1982 classic meets users' continuing need for practical information on this pressing topic. Included are case studies of reliablesystems from manufacturers such as Tandem, Stratus, IBM, and Digital, as well as coverage of special systems such as the Galileo Orbiter fault protection system and AT&T telephone switching processors.

  2. Switching Systems: Controllability and Control Design

    Science.gov (United States)

    2009-04-25

    TERMS EOARD, Navigation, Comunications & Guidance, Complex Systems 16. SECURITY CLASSIFICATION OF: 19a. NAME OF RESPONSIBLE PERSON JAMES LAWTON Ph...Switching Systems : Controllability and Control Design 5c. PROGRAM ELEMENT NUMBER 5d. PROJECT NUMBER 5d. TASK NUMBER 6. AUTHOR(S) Professor...ABSTRACT Motivated by the need of dealing with physical systems that exhibit a more complicated behavior than those normally described by

  3. Transceiver and system design for digital communications

    CERN Document Server

    Bullock, Scott R

    2014-01-01

    This is the fourth edition of this successful professional reference book on transceiver design, the device that both sends and receives signals, and its place within the wireless communication system. It gives engineers and others a good intuitive understanding of wireless systems and spread spectrum. New topics covered include cognitive radio, systems, networks, and commercial communications. In addition, many items have been extensively updated to improve the flow of the book and enhance comprehension.

  4. Design Criteria For Networked Image Analysis System

    Science.gov (United States)

    Reader, Cliff; Nitteberg, Alan

    1982-01-01

    Image systems design is currently undergoing a metamorphosis from the conventional computing systems of the past into a new generation of special purpose designs. This change is motivated by several factors, notably among which is the increased opportunity for high performance with low cost offered by advances in semiconductor technology. Another key issue is a maturing in understanding of problems and the applicability of digital processing techniques. These factors allow the design of cost-effective systems that are functionally dedicated to specific applications and used in a utilitarian fashion. Following an overview of the above stated issues, the paper presents a top-down approach to the design of networked image analysis systems. The requirements for such a system are presented, with orientation toward the hospital environment. The three main areas are image data base management, viewing of image data and image data processing. This is followed by a survey of the current state of the art, covering image display systems, data base techniques, communications networks and software systems control. The paper concludes with a description of the functional subystems and architectural framework for networked image analysis in a production environment.

  5. Algal Supply System Design - Harmonized Version

    Energy Technology Data Exchange (ETDEWEB)

    Jared Abodeely; Daniel Stevens; Allison Ray; Debor

    2013-03-01

    The objective of this design report is to provide an assessment of current technologies used for production, dewatering, and converting microalgae cultivated in open-pond systems to biofuel. The original draft design was created in 2011 and has subsequently been brought into agreement with the DOE harmonized model. The design report extends beyond this harmonized model to discuss some of the challenges with assessing algal production systems, including the ability to (1) quickly assess alternative algal production system designs, (2) assess spatial and temporal variability, and (3) perform large-scale assessments considering multiple scenarios for thousands of potential sites. The Algae Logistics Model (ALM) was developed to address each of these limitations of current modeling efforts to enable assessment of the economic feasibility of algal production systems across the United States. The (ALM) enables (1) dynamic assessments using spatiotemporal conditions, (2) exploration of algal production system design configurations, (3) investigation of algal production system operating assumptions, and (4) trade-off assessments with technology decisions and operating assumptions. The report discusses results from the ALM, which is used to assess the baseline design determined by harmonization efforts between U.S. DOE national laboratories. Productivity and resource assessment data is provided by coupling the ALM with the Biomass Assessment Tool developed at PNNL. This high-fidelity data is dynamically passed to the ALM and used to help better understand the impacts of spatial and temporal constraints on algal production systems by providing a cost for producing extracted algal lipids annually for each potential site.

  6. CRISP90 - SOFTWARE DESIGN ANALYZER SYSTEM

    Science.gov (United States)

    Tausworthe, R. C.

    1994-01-01

    The CRISP90 Software Design Analyzer System, an update of CRISP-80, is a set of programs forming a software design and documentation tool which supports top-down, hierarchic, modular, structured design and programming methodologies. The quality of a computer program can often be significantly influenced by the design medium in which the program is developed. The medium must foster the expression of the programmer's ideas easily and quickly, and it must permit flexible and facile alterations, additions, and deletions to these ideas as the design evolves. The CRISP90 software design analyzer system was developed to provide the PDL (Programmer Design Language) programmer with such a design medium. A program design using CRISP90 consists of short, English-like textual descriptions of data, interfaces, and procedures that are imbedded in a simple, structured, modular syntax. The display is formatted into two-dimensional, flowchart-like segments for a graphic presentation of the design. Together with a good interactive full-screen editor or word processor, the CRISP90 design analyzer becomes a powerful tool for the programmer. In addition to being a text formatter, the CRISP90 system prepares material that would be tedious and error prone to extract manually, such as a table of contents, module directory, structure (tier) chart, cross-references, and a statistics report on the characteristics of the design. Referenced modules are marked by schematic logic symbols to show conditional, iterative, and/or concurrent invocation in the program. A keyword usage profile can be generated automatically and glossary definitions inserted into the output documentation. Another feature is the capability to detect changes that were made between versions. Thus, "change-bars" can be placed in the output document along with a list of changed pages and a version history report. Also, items may be marked as "to be determined" and each will appear on a special table until the item is

  7. Crew Transportation System Design Reference Missions

    Science.gov (United States)

    Mango, Edward J.

    2015-01-01

    Contains summaries of potential design reference mission goals for systems to transport humans to andfrom low Earth orbit (LEO) for the Commercial Crew Program. The purpose of this document is to describe Design Reference Missions (DRMs) representative of the end-to-end Crew Transportation System (CTS) framework envisioned to successfully execute commercial crew transportation to orbital destinations. The initial CTS architecture will likely be optimized to support NASA crew and NASA-sponsored crew rotation missions to the ISS, but consideration may be given in this design phase to allow for modifications in order to accomplish other commercial missions in the future. With the exception of NASA’s mission to the ISS, the remaining commercial DRMs are notional. Any decision to design or scar the CTS for these additional non-NASA missions is completely up to the Commercial Provider. As NASA’s mission needs evolve over time, this document will be periodically updated to reflect those needs.

  8. Signal conditioning circuitry design for instrumentation systems.

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, Cory A.

    2012-01-01

    This report details the current progress in the design, implementation, and validation of the signal conditioning circuitry used in a measurement instrumentation system. The purpose of this text is to document the current progress of a particular design in signal conditioning circuitry in an instrumentation system. The input of the signal conditioning circuitry comes from a piezoresistive transducer and the output will be fed to a 250 ksps, 12-bit analog-to-digital converter (ADC) with an input range of 0-5 V. It is assumed that the maximum differential voltage amplitude input from the sensor is 20 mV with an unknown, but presumably high, sensor bandwidth. This text focuses on a specific design; however, the theory is presented in such a way that this text can be used as a basis for future designs.

  9. CERN hosts Physics and Society Forum

    CERN Multimedia

    Katarina Anthony

    2012-01-01

    On 28-29 March, CERN hosted the fifth edition of the European Physical Society's “Physics and Society” forum. The forum addresses the role of physicists in general society – be they in education, politics, industry or communication. This year, attendees looked at how physicists have adapted - and can continue to adapt - to work in the economic marketplace.   “The forums began back in 2006, as a special closing event for the 2005 World Year of Physics,” explains Martial Ducloy, former President of the French Physical Society and Chair of the EPS Forum Physics and Society. “We decided to keep the sessions going, as they gave physicists a venue to discuss the non-scientific issues that influence their daily work. As the world's largest international physics laboratory – and the venue for this year's EPS Council – CERN seemed the ideal place to host this year's forum.” The forum ...

  10. Human Systems Interface Design Methods Using Ecological Interface Design Principles

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Seung Kweon; Park, Jung Chul; Kim, Sun Su; Sim, Kwang Pyo; Yuk, Seung Yul; Choi, Jae Hyeon; Yoon, Seung Hyun [Chungju National University, Chungju (Korea, Republic of)

    2009-12-15

    The results of this study categorized into two parts. The first part is the guidelines for EID designs. The procedure to observe for EID design is composed of 6 steps; 1) to define a target system, 2) to make an abstraction hierarchy model, 3) to check the link structure among each components included in the layers of abstraction hierarchy model, 4) to transform information requirements to variables, 5) to make the graphs related to each variables, 6) to check the graphs by visual display design principles and heuristic rules. The second part is an EID design alternative for nuclear power plant. The EID for high level function represents the energy balance and energy flow in each loop of nuclear power plant. The EID for middle level function represents the performance indicators of each equipment involved in the all processes of changing from coolants to steam. The EID for low level function represents the values measured in each equipment such as temperature, pressure, water level and so on.

  11. Design and Management of Networked Information Systems

    DEFF Research Database (Denmark)

    Havn, Erling; Bansler, Jørgen P.

    1996-01-01

    -based IS. There are several reasons for this: (a) Networked IS are large and complex systems; (b) in most cases, one has to deal with a number of existing - probably heterogenous - technical hardware and software platforms and link them together in a network; (c) differences in organizational culture, work......In this paper, we present a newly started research project at the Center for Tele-Information at the Technical University of Denmark. The project focuses on the design and management of networked information systems, that is computer-based IS linked by a wide area network and supporting...... communication between geographically dispersed organizational units. Examples include logistics systems, airline booking systems, and CSCW systems. We assume that the design and implementation of networked IS is significantly more difficult and risky than the development of traditional "stand-alone" computer...

  12. Systems design methodology to develop chrysanthemum growing systems

    NARCIS (Netherlands)

    Blok, C.; Vermeulen, T.

    2012-01-01

    When chrysanthemum growers change soil for a soilless growing system they aim for labour cost reduction, quality and yield improvement and reduced emissions of nutrients. Because many attempts to come up with a viable soilless system failed, improvements and systemizations of the design process were

  13. Systemic Design for Second-Order Effects

    Directory of Open Access Journals (Sweden)

    Evan Barba

    2017-04-01

    Full Text Available Second-order effects refer to changes within a system that are the result of changes made somewhere else in the system (the first-order effects. Second-order effects can occur at different spatial, temporal, or organizational scales from the original interventions, and are difficult to control. Some organizational theorists suggest that careful management of feedback processes can facilitate controlled change from one organizational configuration to another. Recognizing that skill in managing feedback processes is a core competency of design suggests that design skills are potentially useful tools in achieving organizational change. This paper describes a case study in which a co-design methodology was used to control the second-order effects resulting from a classroom intervention to create organizational change. This approach is then theorized as the Instigator Systems approach.

  14. Tritium glovebox stripper system seismic design evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Grinnell, J. J. [Savannah River Site (SRS), Aiken, SC (United States); Klein, J. E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-09-01

    The use of glovebox confinement at US Department of Energy (DOE) tritium facilities has been discussed in numerous publications. Glovebox confinement protects the workers from radioactive material (especially tritium oxide), provides an inert atmosphere for prevention of flammable gas mixtures and deflagrations, and allows recovery of tritium released from the process into the glovebox when a glovebox stripper system (GBSS) is part of the design. Tritium recovery from the glovebox atmosphere reduces emissions from the facility and the radiological dose to the public. Location of US DOE defense programs facilities away from public boundaries also aids in reducing radiological doses to the public. This is a study based upon design concepts to identify issues and considerations for design of a Seismic GBSS. Safety requirements and analysis should be considered preliminary. Safety requirements for design of GBSS should be developed and finalized as a part of the final design process.

  15. SYSTEMS APPROACH TO DESIGN OF BUILDINGS DESIGNATED FOR DIPLOMATIC MISSIONS

    Directory of Open Access Journals (Sweden)

    Istomin Boris Semenovich

    2012-10-01

    Full Text Available The article covers the design of buildings of diplomatic missions as sophisticated, multi-functional networks of buildings and structures. Their constituents (rooms have up to 100 different options each of which serves a particular function (namely, lobbies, reception areas, guest rooms, halls, dining rooms, offices, flats, toilets, etc. that may be clustered into four functional groups: diplomatic missions, official areas, residential areas, service areas. The systems approach to the process of planning and designing of buildings of diplomatic missions is to attain the following objectives, including functional development of buildings of diplomatic missions, rational arrangement of their constituents and facilities, grouping and zoning, integrity and interrelation of elements of mission buildings. As a result, the proposed approach is to ensure high-quality architectural and structural solutions.

  16. ROUTE PLAN DESIGNER FOR TRACTOR GUIDANCE SYSTEMS

    DEFF Research Database (Denmark)

    Sveistrup, Daniel; Jørgensen, Rasmus Nyholm; Green, Ole

    2010-01-01

    the benefits of the software. 1- a modified fullscalerandomized split-plot design of 840 parcels and 15 treatment combinations. 2 - a maize fieldsetup ensuring a prototype crop-weed detection camera to experience as many crops, weed and soilcolor conditions as possible. For both cases, after the overall layout...... was outlined, it took less thanone hour entering the design into the software and generating the auto-guidance files.KeywordsGIS, Auto steering systems, plot trial design, full-scale field trials, Java...

  17. Publish Subscribe Systems Design and Principles

    CERN Document Server

    Tarkoma, Sasu

    2012-01-01

    This book offers an unified treatment of the problems solved by publish/subscribe, how to design and implement the solutions In this book, the author provides an insight into the publish/subscribe technology including the design, implementation, and evaluation of new systems based on the technology.  The book also addresses the basic design patterns and solutions, and discusses their application in practical application scenarios. Furthermore, the author examines current standards and industry best practices as well as recent research proposals in the area. Finally, necessary content ma

  18. The T-Ruby Design System

    DEFF Research Database (Denmark)

    Sharp, Robin; Rasmussen, Ole Steen

    1997-01-01

    This paper describes the T-Ruby system for designing VLSI circuits, starting from formal specifications in which they are described in terms of relational abstractions of their behaviour. The design process involves correctness-preserving transformations based on proved equivalences between...... relations, together with the addition of constraints. A class of implementable relations is defined. The tool enables such relations to be simulated or translated into a circuit description in VHDL. The design process is illustrated by the derivation of a circuit for 2-dimensional convolution....

  19. Cochlear implants: system design, integration, and evaluation.

    Science.gov (United States)

    Zeng, Fan-Gang; Rebscher, Stephen; Harrison, William; Sun, Xiaoan; Feng, Haihong

    2008-01-01

    As the most successful neural prosthesis, cochlear implants have provided partial hearing to more than 120000 persons worldwide; half of which being pediatric users who are able to develop nearly normal language. Biomedical engineers have played a central role in the design, integration and evaluation of the cochlear implant system, but the overall success is a result of collaborative work with physiologists, psychologists, physicians, educators, and entrepreneurs. This review presents broad yet in-depth academic and industrial perspectives on the underlying research and ongoing development of cochlear implants. The introduction accounts for major events and advances in cochlear implants, including dynamic interplays among engineers, scientists, physicians, and policy makers. The review takes a system approach to address critical issues in cochlear implant research and development. First, the cochlear implant system design and specifications are laid out. Second, the design goals, principles, and methods of the subsystem components are identified from the external speech processor and radio frequency transmission link to the internal receiver, stimulator and electrode arrays. Third, system integration and functional evaluation are presented with respect to safety, reliability, and challenges facing the present and future cochlear implant designers and users. Finally, issues beyond cochlear implants are discussed to address treatment options for the entire spectrum of hearing impairment as well as to use the cochlear implant as a model to design and evaluate other similar neural prostheses such as vestibular and retinal implants.

  20. Transceiver and system design for digital communications

    CERN Document Server

    Bullock, Scott

    2009-01-01

    Now in a 3rd edition, this successful book provides an intuitive approach to transceiver design, allowing a broad spectrum of readers to understand the topics clearly. It covers a wide range of data link communication design techniques, including link budgets, dynamic range and system analysis of receivers and transmitters used in data link communications, digital modulation and demodulation techniques of phase-shift keyed and frequency hopped spread spectrum systems using phase diagrams, multipath, gain control, an intuitive approach to probability, jamming reduction method using various adap

  1. Conceptual frames for changing production system design

    DEFF Research Database (Denmark)

    Jensen, Per Langå; Broberg, Ole

    2003-01-01

    In order to integrate ergonomic aspects into the design of products and production systems many tools and procedures are available. For the ergonomists, however, it is a question of recognizing the organizational context and the role to play for making integration possible. Based on an understand......In order to integrate ergonomic aspects into the design of products and production systems many tools and procedures are available. For the ergonomists, however, it is a question of recognizing the organizational context and the role to play for making integration possible. Based...

  2. Essentials of Systems Analysis and Design

    DEFF Research Database (Denmark)

    Kotzab, Herbert

    2010-01-01

    Book review of: Essentials of Systems Analysis and Design: An international version / Joseph V. Valacich, Joey F. George and Jeffrey A. Hoffer. ( Pearson Education Int., 4th edition, 2009. 464 pages. ISBN: 978-0-13-506984-4; 0-13-506984-X)......Book review of: Essentials of Systems Analysis and Design: An international version / Joseph V. Valacich, Joey F. George and Jeffrey A. Hoffer. ( Pearson Education Int., 4th edition, 2009. 464 pages. ISBN: 978-0-13-506984-4; 0-13-506984-X)...

  3. Design and synthesis of reactive separation systems

    Energy Technology Data Exchange (ETDEWEB)

    Doherty, M.F.

    1992-01-01

    During the last decade there has been a rapid upturn in interest in reactive distillation. The chemical process industry recognizes the favorable economics of carrying out reaction simultaneously with distillation for certain classes of reacting systems, and many new processes have been built based on this technology. Interest is also increasing by academics and software vendors. Systematic design methods for reactive distillation systems have only recently begun to emerge. In this report we survey the available design techniques and point out the contributions made by our group at the University of Massachusetts.

  4. Study on Reactive Automatic Compensation System Design

    Science.gov (United States)

    Zhe, Sun; Qingyang, Liang; Peiqing, Luo; Chenfei, Zhang

    At present, low-voltage side of transformer is public in urban distribution network, as inductive load of household appliances is increasing, the power factor decreased, this lead to a large loss of public transformer low voltage side, the supply voltage indicators can not meet user's requirements. Therefore, the design of reactive power compensation system has become another popular research. This paper introduces the principle of reactive power compensation, analyzes key technologies of reactive power compensation, design an overall program of reactive power automatic compensation system to conquer various deficiencies of reactive power automatic compensation equipment.

  5. Design of penicillin fermentation process simulation system

    Science.gov (United States)

    Qi, Xiaoyu; Yuan, Zhonghu; Qi, Xiaoxuan; Zhang, Wenqi

    2011-10-01

    Real-time monitoring for batch process attracts increasing attention. It can ensure safety and provide products with consistent quality. The design of simulation system of batch process fault diagnosis is of great significance. In this paper, penicillin fermentation, a typical non-linear, dynamic, multi-stage batch production process, is taken as the research object. A visual human-machine interactive simulation software system based on Windows operation system is developed. The simulation system can provide an effective platform for the research of batch process fault diagnosis.

  6. Information system design in the advertising industry

    Directory of Open Access Journals (Sweden)

    Ko Hsin Chi

    2017-01-01

    Full Text Available In all fields of business that use information technology, an information management system can improve the efficiency of administration, creating systematic content records and storing data as the foundation for effective management and goal development. However, there is one field in which there is no research on information systems, namely the advertising industry. Thus, this study aims to identify the features of advertisements, and explore the concepts of an information system for the advertising field, adopting a qualitative research method to consider the various designs and menu content of an information system for copy writers.

  7. Electromechanical motion systems design and simulation

    CERN Document Server

    Moritz, Frederick G

    2013-01-01

    An introductory reference covering the devices, simulations and limitations in the control of servo systems Linking theoretical material with real-world applications, this book provides a valuable introduction to motion system design. The book begins with an overview of classic theory, its advantages and limitations, before showing how classic limitations can be overcome with complete system simulation. The ability to efficiently vary system parameters (such as inertia, friction, dead-band, damping), and quickly determine their effect on performance, stability, efficiency, is also described. T

  8. Description, Modelling and Design of Production Systems

    DEFF Research Database (Denmark)

    Jacobsen, Peter; Rudolph, Carsten

    1997-01-01

    Design of production systems are rarely an activity in which decision makers in most production companies have much experience. In future, this activity is to be more recurrent due to more and more frequent changes in the production task. Consequently, the decision makers are in need of better...... management tools and methods for description and modelling of production systems supporting the decisions. In this article a structural framework to describe and model production systems will be introduced, and it is shown how the production system of a minor Danish manufacturer of electromechanical...

  9. AUTOMATION DESIGN FOR MONORAIL - BASED SYSTEM PROCESSES

    Directory of Open Access Journals (Sweden)

    Bunda BESA

    2016-12-01

    Full Text Available Currently, conventional methods of decline development put enormous cost pressure on the profitability of mining operations. This is the case with narrow vein ore bodies where current methods and mine design of decline development may be too expensive to support economic extraction of the ore. According to studies, the time it takes to drill, clean and blast an end in conventional decline development can be up to 224 minutes. This is because once an end is blasted, cleaning should first be completed before drilling can commence, resulting in low advance rates per shift. Improvements in advance rates during decline development can be achieved by application of the Electric Monorail Transport System (EMTS based drilling system. The system consists of the drilling and loading components that use monorail technology to drill and clean the face during decline development. The two systems work simultaneously at the face in such a way that as the top part of the face is being drilled the pneumatic loading system cleans the face. However, to improve the efficiency of the two systems, critical processes performed by the two systems during mining operations must be automated. Automation increases safety and productivity, reduces operator fatigue and also reduces the labour costs of the system. The aim of this paper is, therefore, to describe automation designs of the two processes performed by the monorail drilling and loading systems during operations. During automation design, critical processes performed by the two systems and control requirements necessary to allow the two systems execute such processes automatically have also been identified.

  10. Design of laser afocal zoom expander system

    Science.gov (United States)

    Jiang, Lian; Zeng, Chun-Mei; Hu, Tian-Tian

    2018-01-01

    Laser afocal zoom expander system due to the beam diameter variable, can be used in the light sheet illumination microscope to observe the samples of different sizes. Based on the principle of afocal zoom system, the laser collimation and beam expander system with a total length of less than 110mm, 6 pieces of spherical lens and a beam expander ratio of 10 is designed by using Zemax software. The system is focused on laser with a wavelength of 532nm, divergence angle of less than 4mrad and incident diameter of 4mm. With the combination of 6 spherical lens, the beam divergence angle is 0.4mrad at the maximum magnification ratio, and the RMS values at different rates are less than λ/4. This design is simple in structure and easy to process and adjust. It has certain practical value.

  11. Dynamic Systems Modeling in Educational System Design & Policy

    Directory of Open Access Journals (Sweden)

    Jennifer Sterling Groff

    2013-07-01

    Full Text Available Over the last several hundred years, local and national educational systems have evolved from relatively simple systems to incredibly complex, interdependent, policy-laden structures, to which many question their value, effectiveness, and direction they are headed. System Dynamics is a field of analysis used to guide policy and system design in numerous fields including business and urban planning. Applying this tool to educational policy analysis offers insights into the hidden dynamics of the current system, and can be an invaluable tool in designing future scenarios. We explore underlying dynamics of the current US educational system using System Dynamics modeling, and offer an analysis of this tool and its practical application in the US educational system through a case study on the US state of Rhode Island in the 2007-2008 school year. 

  12. Forum: Interpersonal Communication in Instructional Settings: Improving Situational Awareness for Instructional Communication Research: A Forum Response

    Science.gov (United States)

    Titsworth, Scott

    2017-01-01

    In this response, Scott Titsworth analyzes similarities among the forum essays and then offers ideas for how instructional communication scholars might adopt greater situational awareness in research, theory, and application of their work. [Other essays in this forum include: (1) FORUM: Interpersonal Communication in Instructional Settings: The…

  13. The Role of Online Instructors in Asynchronous Discussion Forums

    Science.gov (United States)

    Maddison, Sarah T.; Mazzolini, M. M.; Gay, P. L.

    2007-05-01

    We present qualitative results and advice on the role of online instructors in asynchronous discussion forums and the technologies used to support online interactive learning. Results are based on six years of designing, coordinating, evaluating and teaching into the distance learning program Swinburne Astronomy Online. We discuss why we chose to use asynchronous rather than synchronous discussion forums and how we have implemented them; how we train our online instructors and their role as a 'guide on the side'; techniques for moderating the volume of forum postings while ensuring a constructive learning environment; and methods for dealing with both mixed class preparedness and 'challenging' students within an online environment. Our research into the interaction between students and instructors in online forums provides some interesting (and often counter-intuitive) insights into the relationship between the number and length of student postings and the posting patterns of their instructors. We compare these results with qualitative feedback from both students and instructors on their perception of the online learning and teaching experience.

  14. Automated design of complex dynamic systems.

    Directory of Open Access Journals (Sweden)

    Michiel Hermans

    Full Text Available Several fields of study are concerned with uniting the concept of computation with that of the design of physical systems. For example, a recent trend in robotics is to design robots in such a way that they require a minimal control effort. Another example is found in the domain of photonics, where recent efforts try to benefit directly from the complex nonlinear dynamics to achieve more efficient signal processing. The underlying goal of these and similar research efforts is to internalize a large part of the necessary computations within the physical system itself by exploiting its inherent non-linear dynamics. This, however, often requires the optimization of large numbers of system parameters, related to both the system's structure as well as its material properties. In addition, many of these parameters are subject to fabrication variability or to variations through time. In this paper we apply a machine learning algorithm to optimize physical dynamic systems. We show that such algorithms, which are normally applied on abstract computational entities, can be extended to the field of differential equations and used to optimize an associated set of parameters which determine their behavior. We show that machine learning training methodologies are highly useful in designing robust systems, and we provide a set of both simple and complex examples using models of physical dynamical systems. Interestingly, the derived optimization method is intimately related to direct collocation a method known in the field of optimal control. Our work suggests that the application domains of both machine learning and optimal control have a largely unexplored overlapping area which envelopes a novel design methodology of smart and highly complex physical systems.

  15. Thermal energy systems design and analysis

    CERN Document Server

    Penoncello, Steven G

    2015-01-01

    IntroductionThermal Energy Systems Design and AnalysisSoftwareThermal Energy System TopicsUnits and Unit SystemsThermophysical PropertiesEngineering DesignEngineering EconomicsIntroductionCommon Engineering Economics NomenclatureEconomic Analysis Tool: The Cash Flow DiagramTime Value of MoneyTime Value of Money ExamplesUsing Software to Calculate Interest FactorsEconomic Decision MakingDepreciation and TaxesProblemsAnalysis of Thermal Energy SystemsIntroductionNomenclatureThermophysical Properties of SubstancesSuggested Thermal Energy Systems Analysis ProcedureConserved and Balanced QuantitiesConservation of MassConservation of Energy (The First Law of Thermodynamics)Entropy Balance (The Second Law of Thermodynamics)Exergy Balance: The Combined LawEnergy and Exergy Analysis of Thermal Energy CyclesDetailed Analysis of Thermal Energy CyclesProblemsFluid Transport in Thermal Energy SystemsIntroductionPiping and Tubing StandardsFluid Flow FundamentalsValves and FittingsDesign and Analysis of Pipe NetworksEconomi...

  16. Designing Dexter-based cooperative hypermedia systems

    DEFF Research Database (Denmark)

    Grønbæk, Kaj; Madsen, Ole Lehrmann; Sloth, Lennard

    1993-01-01

    This paper discusses issues for the design of a Dexter-based cooperative hypermedia architecture and a specific system, DeVise Hypermedia (DHM), developed from this architecture. The Dexter Hypertext Reference Model [Hala90] was used as basis for designing the architecture. The Dexter model...... provides a general and solid foundation for designing a general hypermedia architecture. It introduces central concepts and proposes a layering of the architecture. However, to handle cooperative work aspects, such as sharing material and cooperative authoring, we have to go beyond the Dexter model...... concepts. To deal with such aspects we have extended our implementation of the Dexter concepts with support for long-term transactions, locking and event notification as called for by Halasz [Hala88]. The result is a platform independent architecture for developing cooperative hypermedia systems...

  17. Design Principles for New Systems of Assessment

    Science.gov (United States)

    Shepard, Lorrie A.; Penuel, William R.; Davidson, Kristen L.

    2017-01-01

    The Every Student Succeeds Act grants states new flexibility to create more balanced assessment systems with a greater role for formative assessment. Drawing on lessons learned over three decades of research and reform, we argue that state and local leaders should take the lead in designing new assessments guided by two core principles: First,…

  18. Scalable System Design for Covert MIMO Communications

    Science.gov (United States)

    2014-06-01

    Chuck E. Cheese tokens. I’d also like to thank the CCR and the CCR staff for their help particularly in the area of hardware design. Finally, my committee...Communication Systems, pp. 349–352, November 2007. [46] Y. Sun and J. Cavallaro, “Trellis-Search Based Soft -Input Soft -Output MIMO De- tector: Algorithm and VLSI

  19. Modeling and simulation for RF system design

    CERN Document Server

    Frevert, Ronny; Jancke, Roland; Knöchel, Uwe; Schwarz, Peter; Kakerow, Ralf; Darianian, Mohsen

    2005-01-01

    Focusing on RF specific modeling and simulation methods, and system and circuit level descriptions, this work contains application-oriented training material. Accompanied by a CD- ROM, it combines the presentation of a mixed-signal design flow, an introduction into VHDL-AMS and Verilog-A, and the application of commercially available simulators.

  20. Water distribution systems design optimisation using metaheuristics ...

    African Journals Online (AJOL)

    The topic of multi-objective water distribution systems (WDS) design optimisation using metaheuristics is investigated, comparing numerous modern metaheuristics, including several multi-objective evolutionary algorithms, an estimation of distribution algorithm and a recent hyperheuristic named AMALGAM (an evolutionary ...

  1. Feedback Design in Multimodal Dialogue Systems

    NARCIS (Netherlands)

    Van Rosmalen, Peter; Börner, Dirk; Schneider, Jan; Petukhova, Volha; Van Helvert, Joy

    2015-01-01

    This paper discusses the design and development of the instructional aspects of a multimodal dialogue system to train youth parliament members’ presentation and debating skills. Real-time, in-action feedback informs learners on the fly how they perform key skills and enables them to adapt instantly.

  2. Analysis and design of hybrid control systems

    Energy Technology Data Exchange (ETDEWEB)

    Malmborg, J.

    1998-05-01

    Different aspects of hybrid control systems are treated: analysis, simulation, design and implementation. A systematic methodology using extended Lyapunov theory for design of hybrid systems is developed. The methodology is based on conventional control designs in separate regions together with a switching strategy. Dynamics are not well defined if the control design methods lead to fast mode switching. The dynamics depend on the salient features of the implementation of the mode switches. A theorem for the stability of second order switching together with the resulting dynamics is derived. The dynamics on an intersection of two sliding sets are defined for two relays working on different time scales. The current simulation packages have problems modeling and simulating hybrid systems. It is shown how fast mode switches can be found before or during simulation. The necessary analysis work is a very small overhead for a modern simulation tool. To get some experience from practical problems with hybrid control the switching strategy is implemented in two different software environments. In one of them a time-optimal controller is added to an existing PID controller on a commercial control system. Successful experiments with this hybrid controller shows the practical use of the method 78 refs, 51 figs, 2 tabs

  3. Business School's Performance Management System Standards Design

    Science.gov (United States)

    Azis, Anton Mulyono; Simatupang, Togar M.; Wibisono, Dermawan; Basri, Mursyid Hasan

    2014-01-01

    This paper aims to compare various Performance Management Systems (PMS) for business school in order to find the strengths of each standard as inputs to design new model of PMS. There are many critical aspects and gaps notified for new model to improve performance and even recognized that self evaluation performance management is not well…

  4. Research on conceptual design of mechatronic systems

    Indian Academy of Sciences (India)

    phase of mechatronic systems, a conceptual design cyclic feedback solving model of a mechatronic ... Thus, research on matching of component interfaces is an indispensable base for mechatronic ..... 661). References. Bracewell R H, Sharpe J E E 1996 Functional descriptions used in computer support for qualitative.

  5. Advanced system design and operation of GEOTABS buildings design and operation of GEOTABS systems

    CERN Document Server

    Bockelman, Franziska; Soldaty, Hanna

    2013-01-01

    This guidebook provides comprehensive information on GEOTABS systems. It is intended to support building owners, architects and engineers in an early design stage showing how GEOTABS can be integrated into their building concepts. It also gives many helpful advices from experienced engineers that have designed, built and run GEOTABS systems.

  6. Decision models in designing flexible production systems

    Directory of Open Access Journals (Sweden)

    Florescu Adriana

    2017-01-01

    Full Text Available Flexible production system is a complex whole that raise some issues in terms of its design and in relation to the conditions for implementing it. To implement a flexible production system configuration must be found that satisfies both economic and system performance requirements. The configuration which best meet the objectives of introducing a flexible production system must be sought in the set of alternatives defined and evaluated. In this paper we present a methodology of realising the configuration and complex evaluation of the analyzed system. It will be developed models which generate new alternative configurations, optimization and evaluation models of the performance of the flexible production system. This will create a framework for interactive decision support, user-oriented that can be used by management to solve this selection problem. The applicative character of the study consist in tracking of the technological process in real time using the developed software package on the designed system, based on mathematical models for configuration and optimization of the system.

  7. Design of Dependable Control System Using a Component Based Approach

    DEFF Research Database (Denmark)

    Blanke, M.

    1995-01-01

    Design of fault handling in control systems is discussed and a consistent method for design is presented.......Design of fault handling in control systems is discussed and a consistent method for design is presented....

  8. Cognitive System Engineering Approach to Design of Work Support Systems

    DEFF Research Database (Denmark)

    Rasmussen, Jens

    1995-01-01

    The problem of designing work support systems for flexible, dynamic work environments is discussed and a framework for analysis of work in terms of behavior shaping constraints is described. The application of 'ecological interfaces' presenting to the user a map of the relational structure...... of the work space is advocated from the thesis that a map is a better guidance of discretionary tasks than is a route instruction. For the same reason, support of system design is proposed in terms of maps of the design territory, rather than in terms of guidelines....

  9. Energy-aware design of digital systems

    Energy Technology Data Exchange (ETDEWEB)

    Gruian, F.

    2000-02-01

    Power and energy consumption are important issues in many digital applications, for reasons such as packaging cost and battery life-span. With the development of portable computing and communication, an increasing number of research groups are addressing power and energy related issues at various stages during the design process. Most of the work done in this area focuses on lower abstraction levels, such as gate or transistor level. Ideally, a power and energy-efficient design flow should consider the power and energy issues at every stage in the design process. Therefore, power and energy aware methods, applicable early in the design process are required. In this trend, the thesis presents two high-level design methods addressing power and energy consumption minimization. The first of the two approaches we describe, targets power consumption minimization during behavioral synthesis. This is carried out by minimizing the switching activity, while taking the correlations between signals into account. The second approach performs energy consumption minimization during system-level design, by choosing the most energy-efficient schedule and configuration of resources. Both methods make use of the constraint programming paradigm to model the problems in an elegant manner. The experimental results presented in this thesis show the impact of addressing the power and energy related issues early in the design process.

  10. How to Present Evidence-Based Usability Design Principles Dedicated to Medication-Related Alerting Systems to Designers and Evaluators? Results from a Workshop.

    Science.gov (United States)

    Marcilly, Romaric; Monkman, Helen; Villumsen, Sidsel; Kaufman, David; Beuscart-Zephir, Marie-Catherine

    2016-01-01

    Medication alerting system use errors and lack of adoption are often attributed to usability issues. Previous work has used evidence from the literature to reveal usability principles specific to medication alerting systems and identify potential consequences of violating these principles. The current study sought to explore how best to convey these principles to designers and evaluators of these systems to facilitate their work. To this aim, a workshop with 19 participants was used to generate ideas and opinions on how to deliver these topic-specific design principles in a way that would be most helpful for them. Participants generated ideas for how (e.g., a collaborative, continuously updated forum) and what (e.g., illustrations, checklists, evidence sources and strength, consequences of violations) information is most useful to disseminate usability principles for medication alerting systems. Participants, especially designers, expressed desire to use these principles in practice and avoid previously documented mistakes and therefore make design and evaluation of these systems more effective and efficient. Those insights are discussed in terms of feasibility and logistical challenges to developing the proposed documentation). To move this work forward, a more collaborative approach of Human Factors specialists in medical informatics is necessary.

  11. The Secure Distributed Operating System Design Project

    Science.gov (United States)

    1988-06-01

    development of C2 Internet is tightly related to the philosophy of its underlying Cronus system, which stresses object-oriented design and operating system...z v T O. Then there is a sequence ic E 0 such that map*(v T I) = V T 0 A n. Projecting on view v, map’(v T 1) T v = v T 0 t VAPe T v. But by using...in the operating system, relieving application programmers of the task of implementing them in each application. Some of the services provided by

  12. Digital signal processor fundamentals and system design

    CERN Document Server

    Angoletta, M E

    2008-01-01

    Digital Signal Processors (DSPs) have been used in accelerator systems for more than fifteen years and have largely contributed to the evolution towards digital technology of many accelerator systems, such as machine protection, diagnostics and control of beams, power supply and motors. This paper aims at familiarising the reader with DSP fundamentals, namely DSP characteristics and processing development. Several DSP examples are given, in particular on Texas Instruments DSPs, as they are used in the DSP laboratory companion of the lectures this paper is based upon. The typical system design flow is described; common difficulties, problems and choices faced by DSP developers are outlined; and hints are given on the best solution.

  13. Design concept for the FLUTE control system

    Energy Technology Data Exchange (ETDEWEB)

    Marsching, Sebastian; Huttel, Erhard; Mueller, Anke-Susanne; Naknaimueang, Somprasong; Nasse, Michael J.; Rossmanith, Robert; Schreck, Marco; Schuh, Marcel; Schwarz, Markus [Karlsruhe Institute of Technology, Karlsruhe (Germany)

    2013-07-01

    FLUTE is a linac-based THz-source being constructed at the Karlsruhe Institute of Technology (KIT). One of the goals of the FLUTE project is the generation of femtosecond electron-bunches. In order to study the various effects influencing the final bunch length, data-acquisition and storage systems that allow correlation of parameters on a per-pulse basis are required. We are planning to use an EPICS-based control system that employs special techniques for pulse-synchronous data-acquisition. In this talk we present the current design concept for this system.

  14. The Spallation Neutron Source accelerator system design

    Energy Technology Data Exchange (ETDEWEB)

    Henderson, S., E-mail: stuarth@fnal.gov [Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, TN 37831 (United States); Abraham, W. [Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, CA 94720 (United States); Aleksandrov, A. [Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, TN 37831 (United States); Allen, C. [Techsource, Inc., 1475 Central Avenue, Suite 250, Los Alamos, NM 87544-3291 (United States); Alonso, J. [Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, CA 94720 (United States); Anderson, D. [Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, TN 37831 (United States); Arenius, D. [Thomas Jefferson National Accelerator Facility, 12000 Jefferson Avenue, Newport News, VA 23606 (United States); Arthur, T. [Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, TN 37831 (United States); Assadi, S. [Techsource, Inc., 1475 Central Avenue, Suite 250, Los Alamos, NM 87544-3291 (United States); Ayers, J.; Bach, P. [Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, CA 94720 (United States); Badea, V. [Brookhaven National Laboratory, P.O. Box 5000, Upton, NY 11973-5000 (United States); Battle, R. [Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, TN 37831 (United States); Beebe-Wang, J. [Brookhaven National Laboratory, P.O. Box 5000, Upton, NY 11973-5000 (United States); Bergmann, B.; Bernardin, J.; Bhatia, T.; Billen, J.; Birke, T.; Bjorklund, E. [Los Alamos National Laboratory, P.O. Box 1663, Los Alamos, NM 87545 (United States); and others

    2014-11-01

    The Spallation Neutron Source (SNS) was designed and constructed by a collaboration of six U.S. Department of Energy national laboratories. The SNS accelerator system consists of a 1 GeV linear accelerator and an accumulator ring providing 1.4 MW of proton beam power in microsecond-long beam pulses to a liquid mercury target for neutron production. The accelerator complex consists of a front-end negative hydrogen-ion injector system, an 87 MeV drift tube linear accelerator, a 186 MeV side-coupled linear accelerator, a 1 GeV superconducting linear accelerator, a 248-m circumference accumulator ring and associated beam transport lines. The accelerator complex is supported by ∼100 high-power RF power systems, a 2 K cryogenic plant, ∼400 DC and pulsed power supply systems, ∼400 beam diagnostic devices and a distributed control system handling ∼100,000 I/O signals. The beam dynamics design of the SNS accelerator is presented, as is the engineering design of the major accelerator subsystems.

  15. The Spallation Neutron Source accelerator system design

    Science.gov (United States)

    Henderson, S.; Abraham, W.; Aleksandrov, A.; Allen, C.; Alonso, J.; Anderson, D.; Arenius, D.; Arthur, T.; Assadi, S.; Ayers, J.; Bach, P.; Badea, V.; Battle, R.; Beebe-Wang, J.; Bergmann, B.; Bernardin, J.; Bhatia, T.; Billen, J.; Birke, T.; Bjorklund, E.; Blaskiewicz, M.; Blind, B.; Blokland, W.; Bookwalter, V.; Borovina, D.; Bowling, S.; Bradley, J.; Brantley, C.; Brennan, J.; Brodowski, J.; Brown, S.; Brown, R.; Bruce, D.; Bultman, N.; Cameron, P.; Campisi, I.; Casagrande, F.; Catalan-Lasheras, N.; Champion, M.; Champion, M.; Chen, Z.; Cheng, D.; Cho, Y.; Christensen, K.; Chu, C.; Cleaves, J.; Connolly, R.; Cote, T.; Cousineau, S.; Crandall, K.; Creel, J.; Crofford, M.; Cull, P.; Cutler, R.; Dabney, R.; Dalesio, L.; Daly, E.; Damm, R.; Danilov, V.; Davino, D.; Davis, K.; Dawson, C.; Day, L.; Deibele, C.; Delayen, J.; DeLong, J.; Demello, A.; DeVan, W.; Digennaro, R.; Dixon, K.; Dodson, G.; Doleans, M.; Doolittle, L.; Doss, J.; Drury, M.; Elliot, T.; Ellis, S.; Error, J.; Fazekas, J.; Fedotov, A.; Feng, P.; Fischer, J.; Fox, W.; Fuja, R.; Funk, W.; Galambos, J.; Ganni, V.; Garnett, R.; Geng, X.; Gentzlinger, R.; Giannella, M.; Gibson, P.; Gillis, R.; Gioia, J.; Gordon, J.; Gough, R.; Greer, J.; Gregory, W.; Gribble, R.; Grice, W.; Gurd, D.; Gurd, P.; Guthrie, A.; Hahn, H.; Hardek, T.; Hardekopf, R.; Harrison, J.; Hatfield, D.; He, P.; Hechler, M.; Heistermann, F.; Helus, S.; Hiatt, T.; Hicks, S.; Hill, J.; Hill, J.; Hoff, L.; Hoff, M.; Hogan, J.; Holding, M.; Holik, P.; Holmes, J.; Holtkamp, N.; Hovater, C.; Howell, M.; Hseuh, H.; Huhn, A.; Hunter, T.; Ilg, T.; Jackson, J.; Jain, A.; Jason, A.; Jeon, D.; Johnson, G.; Jones, A.; Joseph, S.; Justice, A.; Kang, Y.; Kasemir, K.; Keller, R.; Kersevan, R.; Kerstiens, D.; Kesselman, M.; Kim, S.; Kneisel, P.; Kravchuk, L.; Kuneli, T.; Kurennoy, S.; Kustom, R.; Kwon, S.; Ladd, P.; Lambiase, R.; Lee, Y. Y.; Leitner, M.; Leung, K.-N.; Lewis, S.; Liaw, C.; Lionberger, C.; Lo, C. C.; Long, C.; Ludewig, H.; Ludvig, J.; Luft, P.; Lynch, M.; Ma, H.; MacGill, R.; Macha, K.; Madre, B.; Mahler, G.; Mahoney, K.; Maines, J.; Mammosser, J.; Mann, T.; Marneris, I.; Marroquin, P.; Martineau, R.; Matsumoto, K.; McCarthy, M.; McChesney, C.; McGahern, W.; McGehee, P.; Meng, W.; Merz, B.; Meyer, R.; Meyer, R.; Miller, B.; Mitchell, R.; Mize, J.; Monroy, M.; Munro, J.; Murdoch, G.; Musson, J.; Nath, S.; Nelson, R.; Nelson, R.; O`Hara, J.; Olsen, D.; Oren, W.; Oshatz, D.; Owens, T.; Pai, C.; Papaphilippou, I.; Patterson, N.; Patterson, J.; Pearson, C.; Pelaia, T.; Pieck, M.; Piller, C.; Plawski, T.; Plum, M.; Pogge, J.; Power, J.; Powers, T.; Preble, J.; Prokop, M.; Pruyn, J.; Purcell, D.; Rank, J.; Raparia, D.; Ratti, A.; Reass, W.; Reece, K.; Rees, D.; Regan, A.; Regis, M.; Reijonen, J.; Rej, D.; Richards, D.; Richied, D.; Rode, C.; Rodriguez, W.; Rodriguez, M.; Rohlev, A.; Rose, C.; Roseberry, T.; Rowton, L.; Roybal, W.; Rust, K.; Salazer, G.; Sandberg, J.; Saunders, J.; Schenkel, T.; Schneider, W.; Schrage, D.; Schubert, J.; Severino, F.; Shafer, R.; Shea, T.; Shishlo, A.; Shoaee, H.; Sibley, C.; Sims, J.; Smee, S.; Smith, J.; Smith, K.; Spitz, R.; Staples, J.; Stein, P.; Stettler, M.; Stirbet, M.; Stockli, M.; Stone, W.; Stout, D.; Stovall, J.; Strelo, W.; Strong, H.; Sundelin, R.; Syversrud, D.; Szajbler, M.; Takeda, H.; Tallerico, P.; Tang, J.; Tanke, E.; Tepikian, S.; Thomae, R.; Thompson, D.; Thomson, D.; Thuot, M.; Treml, C.; Tsoupas, N.; Tuozzolo, J.; Tuzel, W.; Vassioutchenko, A.; Virostek, S.; Wallig, J.; Wanderer, P.; Wang, Y.; Wang, J. G.; Wangler, T.; Warren, D.; Wei, J.; Weiss, D.; Welton, R.; Weng, J.; Weng, W.-T.; Wezensky, M.; White, M.; Whitlatch, T.; Williams, D.; Williams, E.; Wilson, K.; Wiseman, M.; Wood, R.; Wright, P.; Wu, A.; Ybarrolaza, N.; Young, K.; Young, L.; Yourd, R.; Zachoszcz, A.; Zaltsman, A.; Zhang, S.; Zhang, W.; Zhang, Y.; Zhukov, A.

    2014-11-01

    The Spallation Neutron Source (SNS) was designed and constructed by a collaboration of six U.S. Department of Energy national laboratories. The SNS accelerator system consists of a 1 GeV linear accelerator and an accumulator ring providing 1.4 MW of proton beam power in microsecond-long beam pulses to a liquid mercury target for neutron production. The accelerator complex consists of a front-end negative hydrogen-ion injector system, an 87 MeV drift tube linear accelerator, a 186 MeV side-coupled linear accelerator, a 1 GeV superconducting linear accelerator, a 248-m circumference accumulator ring and associated beam transport lines. The accelerator complex is supported by ~100 high-power RF power systems, a 2 K cryogenic plant, ~400 DC and pulsed power supply systems, ~400 beam diagnostic devices and a distributed control system handling ~100,000 I/O signals. The beam dynamics design of the SNS accelerator is presented, as is the engineering design of the major accelerator subsystems.

  16. 77 FR 13683 - Government/Industry Aeronautical Charting Forum Meeting

    Science.gov (United States)

    2012-03-07

    ... Federal Aviation Administration Government/Industry Aeronautical Charting Forum Meeting AGENCY: Federal...-annual meeting of the Federal Aviation Administration (FAA) Aeronautical Charting Forum (ACF) to discuss... Charting Forum. BILLING CODE M ...

  17. Optimum Design Of On Grid Pv System Using Tracking System

    Directory of Open Access Journals (Sweden)

    Saeed Mansour

    2015-05-01

    Full Text Available Abstract The fossil fuel is a main issue in the world due to the increase of fossil fuel cost and the depletion of the fossil fuel with continuous increasing demand on electricity. With continuous decrease of PV panels cost it is interesting to consider generation of electricity from PV system. To provide electric energy to a load in a remote area where electric grid utility is not available or connection with grid utility is available there are two approaches of photovoltaic system PV without tracking system Fixed System and PV with tracking systems. The result shows that the energy production by using PV with tracking system generates more energy in comparison with fixed panels system. However the cost per produced KWH is less in case of using fixed panels. This is the backbone in choice between two approaches of photovoltaic system. In this work a system design and cost analysis for two approaches of photovoltaic system are considered.

  18. Members of the Forum Engelberg visit CERN

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    The Forum Engelberg is an annual interdisciplinary conference held in Engelberg, Switzerland intended to act as an international platform for debate and exchange of views on key issues affecting scientific research, technology, economics and philosophy. Its President is Hubert Curien - former French Minister of Research and Space Research, and President of the CERN Council from 1994 to 1996. Photo 01: (left to right) Mrs Mireille Quirina; D. Denegri, Physics Coordinator, CMS experiment; and Mrs Marisa Jaconi at the CMS detector's assembly site. In the background is the CMS magnet system under construction. The red concentric rings are part of the barrel yoke, which returns the magnetic flux generated by the superconducting coil. Supported from the innermost barrel ring is the outer cylinder of the vacuum tank that will house the superconducting coil.

  19. Members of the Forum Engelberg visit CERN

    CERN Document Server

    Patrice Loïez

    2002-01-01

    The Forum Engelberg is an annual interdisciplinary conference held in Engelberg, Switzerland intended to act as an international platform for debate and exchange of views on key issues affecting scientific research, technology, economics and philosophy. Its President is Hubert Curien - former French Minister of Research and Space Research, and President of the CERN Council from 1994 to 1996. He is seen here visiting building SM18, which houses String 2: the test facility for LHC systems. Photo 01: (left to right) Mme Jaconi, Prof. Roger Berthouzoz, M. Guillaume Pictet, M. Claude Bagnoud, R. Saban and Hubert Curien. Photo 02: (left to right) R. Saban, M. Jean-Claude Rochat, Hubert Curien and M. Guillaume Pictet. Photo 03: (left to right) R. Saban, M. Jean-Claude Rochat and Hubert Curien.

  20. MW-Class Electric Propulsion System Designs

    Science.gov (United States)

    LaPointe, Michael R.; Oleson, Steven; Pencil, Eric; Mercer, Carolyn; Distefano, Salvador

    2011-01-01

    Electric propulsion systems are well developed and have been in commercial use for several years. Ion and Hall thrusters have propelled robotic spacecraft to encounters with asteroids, the Moon, and minor planetary bodies within the solar system, while higher power systems are being considered to support even more demanding future space science and exploration missions. Such missions may include orbit raising and station-keeping for large platforms, robotic and human missions to near earth asteroids, cargo transport for sustained lunar or Mars exploration, and at very high-power, fast piloted missions to Mars and the outer planets. The Advanced In-Space Propulsion Project, High Efficiency Space Power Systems Project, and High Power Electric Propulsion Demonstration Project were established within the NASA Exploration Technology Development and Demonstration Program to develop and advance the fundamental technologies required for these long-range, future exploration missions. Under the auspices of the High Efficiency Space Power Systems Project, and supported by the Advanced In-Space Propulsion and High Power Electric Propulsion Projects, the COMPASS design team at the NASA Glenn Research Center performed multiple parametric design analyses to determine solar and nuclear electric power technology requirements for representative 300-kW class and pulsed and steady-state MW-class electric propulsion systems. This paper describes the results of the MW-class electric power and propulsion design analysis. Starting with the representative MW-class vehicle configurations, and using design reference missions bounded by launch dates, several power system technology improvements were introduced into the parametric COMPASS simulations to determine the potential system level benefits such technologies might provide. Those technologies providing quantitative system level benefits were then assessed for technical feasibility, cost, and time to develop. Key assumptions and primary

  1. Progress and Next Steps in the BIOPROTA Collaborative Forum

    Energy Technology Data Exchange (ETDEWEB)

    Perez-Sanchez, Danyl [Departamento de Medio Ambiente, Centro de Investigaciones Energeticas Medioambientales y Tecnologicas - CIEMAT, Avenida Complutense 40, 28040, Madrid (Spain); Smith, G. [GMS Abingdon Ltd, Tamarisk, Radley Road, Abingdon, OX14 3PP (United Kingdom); Smith, K. [RadEcol Consulting Ltd, Fell View, Middletown, Cumbria, CA22 2UG (United Kingdom)

    2014-07-01

    BIOPROTA is an international collaborative forum, started in 2002, designed to support resolution of key issues in the biosphere aspects of assessments of the long-term impact of potential contaminant releases associated with solid radioactive waste disposal. The focus is on the application of good science to provide a good understanding of relevant biosphere system processes and address important uncertainties. This in turn supports decision making related to waste management and the appropriate allocation of resources to solve problems. Membership includes regulators, operators, technical support organisations and academic institutions from North America, Europe and Asia. Member organisations have representation on a Sponsoring Committee, currently chaired by Danyl Perez-Sanchez (CIEMAT) and supported by a Technical Secretariat. Given the long time frames which are required to be addressed in post-closure assessments of radioactive waste disposal facilities, thousands of years or even longer, the range of assessment issues is very large. In essence, they boil down to being related to the scope for environmental change and the behaviour of humans and ecosystems in response to such change, including their contribution to the change itself. This requires consideration of climate change, landscape evolution, the dynamics of ecosystems, and then, the behaviour of radionuclides within those changing systems and the ways by which their presence may give rise to radiation exposure. It is multi-disciplinary but has an important focus on radioecology. The forum is tailored to enable opportunities for sharing, reviewing and interpretation of information used in assessments. This includes methods for system characterisation and description, modelling of system evolution subject to assumptions for environmental change, exposure modelling according to those possibilities for evolution, and data to support all the assessment assumptions and model parameter selection. The

  2. Design of a handprint recognition system

    Science.gov (United States)

    Garris, Michael D.; Blue, James L.; Candela, Gerald T.; Dimmick, Darrin L.; Geist, Jon C.; Grother, Patrick J.; Janet, Stanley A.; Omidvar, Omid M.; Wilson, Charles L.

    1997-04-01

    A public domain optical character recognition (OCR) system has ben developed by the National Institute of Standards and Technology (NIST). This standard reference form-based handprint recognition system is designed to provide a baseline of performance on an open application. The system's source code, training data, performance assessment tools, and type of forms processed are all publicly available. The system is modular, allowing for system component testing and comparisons, and it can be sued to validate training and testing sets in an end-to-end application. The system's source code is written in C and will run on virtually any UNIX-based computer. The presented functional components of the system are divided into three levels of processing: (1) form-level processing includes the tasks of form registration and form removal; (2) field-level processing includes the tasks of field isolation, line trajectory reconstruction, and field segmentation; and (3) character- level processing includes character normalization, feature extraction, character classification, and dictionary-based postprocessing. The system contains a number of significant contributions to OCR technology, including an optimized probabilistic neural network (PNN) classifier that operates a factor of 20 times faster than traditional software implementations of the algorithm. Provided in the system are a host of data structures and low-level utilities for computing spatial histograms, least-squares fitting, spatial zooming, connected components, Karhunen Loeve feature extraction, optimized PNN classification, and dynamic string alignment. Any portion of this standard reference OCR system can be used in commercial products without restrictions.

  3. Software design for resilient computer systems

    CERN Document Server

    Schagaev, Igor

    2016-01-01

    This book addresses the question of how system software should be designed to account for faults, and which fault tolerance features it should provide for highest reliability. The authors first show how the system software interacts with the hardware to tolerate faults. They analyze and further develop the theory of fault tolerance to understand the different ways to increase the reliability of a system, with special attention on the role of system software in this process. They further develop the general algorithm of fault tolerance (GAFT) with its three main processes: hardware checking, preparation for recovery, and the recovery procedure. For each of the three processes, they analyze the requirements and properties theoretically and give possible implementation scenarios and system software support required. Based on the theoretical results, the authors derive an Oberon-based programming language with direct support of the three processes of GAFT. In the last part of this book, they introduce a simulator...

  4. Design consideration for magnetically suspended flywheel systems

    Science.gov (United States)

    Anand, D.; Kirk, J. A.; Frommer, D. A.

    1985-01-01

    Consideration is given to the design, fabrication, and testing of a magnetically suspended flywheel system for energy storage applications in space. The device is the prototype of a system combining passive suspension of the flywheel plate by samarium cobalt magnets and active control in the radial direction using eight separate magnetic coils. The bearing assembly was machined from a nickel-iron alloy, and the machine parts are all hydrogen annealed. Slots in the magnetic plate allow four independent quadrants for control. The motor/generator component of the system is a brushless dc-permanent magnetic/ironless engine using electronic communication. The system has been tested at over 2500 rpm with satisfactory results. The system characteristics of the flywheel for application in low earth orbit (LEO) are given in a table.

  5. Transnational Political Rights and Electoral Systems Design

    DEFF Research Database (Denmark)

    Elklit, Jørgen

    Voting from abroad is possible in slightly more than half of all countries, even though it may not be an option for all a country’s citizens permanently or temporarily out-of-country. This paper looks at the special electoral systems created for this purpose as it focuses on changes and innovations...... in electoral system design in order to cater for the special interests of diaspora voters. Most countries allowing voting from abroad simply includes the votes coming from out-of-country among the votes cast in-country, so no special electoral system has been invented or implemented. But at least 14 countries...... have created exterritorial constituencies, where they in most cases basically use the same electoral system as they do for the ordinary in-country voting. The conclusion is that the creation of new electoral systems for voting from abroad has not – at least not so far – attracted a lot of interest from...

  6. An engineering design approach to systems biology.

    Science.gov (United States)

    Janes, Kevin A; Chandran, Preethi L; Ford, Roseanne M; Lazzara, Matthew J; Papin, Jason A; Peirce, Shayn M; Saucerman, Jeffrey J; Lauffenburger, Douglas A

    2017-07-17

    Measuring and modeling the integrated behavior of biomolecular-cellular networks is central to systems biology. Over several decades, systems biology has been shaped by quantitative biologists, physicists, mathematicians, and engineers in different ways. However, the basic and applied versions of systems biology are not typically distinguished, which blurs the separate aspirations of the field and its potential for real-world impact. Here, we articulate an engineering approach to systems biology, which applies educational philosophy, engineering design, and predictive models to solve contemporary problems in an age of biomedical Big Data. A concerted effort to train systems bioengineers will provide a versatile workforce capable of tackling the diverse challenges faced by the biotechnological and pharmaceutical sectors in a modern, information-dense economy.

  7. Meeting Report: 2015 PDA Virus & TSE Safety Forum.

    Science.gov (United States)

    Willkommen, Hannelore; Blümel, Johannes; Brorson, Kurt; Chen, Dayue; Chen, Qi; Gröner, Albrecht; Kreil, Thomas R; Ruffing, Michel; Ruiz, Sol; Scott, Dorothy; Silvester, Glenda

    2016-01-01

    The report provides a summary of the presentations at the Virus & TSE Safety Forum 2015 organized by the Parenteral Drug Association (PDA) and held in Cascais, Portugal, from 9 to 11 June, 2015. As with previous conferences of this series, the PDA Virus & TSE Safety Forum 2015 provided an excellent forum for the exchange of information and opinions between the industry, research organizations, and regulatory bodies. Regulatory updates on virus and TSE safety aspects illustrating current topics of discussion at regulatory agencies in Europe and the United States were provided; the conference covered emerging viruses and new virus detection systems that may be used for the investigation of human pathogenic viruses as well as the virus safety of cell substrates and of raw material of ovine/caprine or human origin. Progress of development and use of next-generation sequencing methods was shown by several examples. Virus clearance data illustrating the effectiveness of inactivation or removal methods were presented and data provided giving insight into the mechanism of action of these technologies. In the transmissible spongiform encephalopathy (TSE) part of the conference, the epidemiology of variant Creutzfeldt-Jakob disease was reviewed and an overview about diagnostic tests provided; current thinking about the spread and propagation of prions was presented and the inactivation of prions by disinfection (equipment) and in production of bovine-derived reagents (heparin) shown. The current report provides an overview about the outcomes of the 2015 PDA Virus & TSE Safety Forum, a unique event in this field. © PDA, Inc. 2016.

  8. System Identification, Environmental Modelling, and Control System Design

    CERN Document Server

    Garnier, Hugues

    2012-01-01

    System Identification, Environmetric Modelling, and Control Systems Design is dedicated to Professor Peter Young on the occasion of his seventieth birthday. Professor Young has been a pioneer in systems and control, and over the past 45 years he has influenced many developments in this field. This volume is comprised of a collection of contributions by leading experts in system identification, time-series analysis, environmetric modelling and control system design – modern research in topics that reflect important areas of interest in Professor Young’s research career. Recent theoretical developments in and relevant applications of these areas are explored treating the various subjects broadly and in depth. The authoritative and up-to-date research presented here will be of interest to academic researcher in control and disciplines related to environmental research, particularly those to with water systems. The tutorial style in which many of the contributions are composed also makes the book suitable as ...

  9. Design of analog integrated circuits and systems

    CERN Document Server

    Laker, Kenneth R

    1994-01-01

    This text is designed for senior or graduate level courses in analog integrated circuits or design of analog integrated circuits. This book combines consideration of CMOS and bipolar circuits into a unified treatment. Also included are CMOS-bipolar circuits made possible by BiCMOS technology. The text progresses from MOS and bipolar device modelling to simple one and two transistor building block circuits. The final two chapters present a unified coverage of sample-data and continuous-time signal processing systems.

  10. Cambodia Development Research Forum II | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Cette subvention permet au Cambodia Development Resource Institute de collaborer avec sept partenaires pour poursuivre les travaux du Cambodia Development Research Forum. Les idées maîtresses du forum sont le fruit d'une rencontre, en 2007, de tous les groupes et particuliers subventionnés par le CRDI au ...

  11. 2009 SREB State Leadership Forum Report

    Science.gov (United States)

    Southern Regional Education Board (SREB), 2009

    2009-01-01

    The Southern Regional Education Board (SREB) Learning-Centered Leadership Program hosted its sixth Annual State Leadership Forum May 7 and 8, 2009, in Atlanta. More than 160 education leaders, district officials and policymakers from 25 states attended the forum to hear from practitioners who are getting results in student learning amidst…

  12. The Copenhagen Forum 1996-2016

    DEFF Research Database (Denmark)

    Ry Nielsen, Jens Carl; Raine, John

    2016-01-01

    Purpose: This chapter tells the story of the initiation, development (over two decades) and collective contribution of the Copenhagen Forum since its foundation in 1996. This Forum comprises a grouping of teachers and directors of masters-level public administrative programmes (notably the MPA) f...

  13. Starship Asterisk: APOD and General Astronomy Discussion Forum

    Science.gov (United States)

    Nemiroff, Robert J.

    2011-01-01

    A main discussion venue for the popular Astronomy Picture of the Day (APOD) website has been recently redesigned and upgraded. The online bulletin board is directly linked from the bottom of recent APODs served from http://apod.nasa.gov/ . Formerly known as "The Asterisk," the site's new design is called "Starship Asterisk" and now declares its forums to be places on a starship, with the current APOD considered as appearing on the main view screen on the Bridge. A central "mission" of Starship Asterisk is to support APOD in various ways. Toward this end, the Bridge forum exists primarily for the (archived) discussion of that day's APOD, the Observation Deck forum facilitates APOD image submissions, and the Library creates a forum where no student question about astronomy is considered to be too easy or too hard. Additionally, Starship Asterisk now includes an astronomy news-oriented links forum titled the Communications Center, a citizen science-oriented links collection called the Science Labs, and classrooms including a free online, textbook-free Astro 101 course, taught by the author, complete with video lectures and powerpoint slides. Typically, over 1,000 astronomy enthusiasts will browse Starship Asterisk on any given day. Although the vast majority of readers prefer to browse anonymously, the site has now garnered over 60,000 posts. A small but dedicated group of volunteer "officers" administer the bulletin board, answer questions about astronomy from curious APOD readers, and openly discuss various astronomy topics, frequently with intended humor. Perhaps surprisingly, the majority of volunteer officers tend NOT to be professional astronomers, but typically quite knowledgeable retirees exercising a lifelong interest in astronomy.

  14. Nuclear integrated database and design advancement system

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Jae Joo; Jeong, Kwang Sub; Kim, Seung Hwan; Choi, Sun Young

    1997-01-01

    The objective of NuIDEAS is to computerize design processes through an integrated database by eliminating the current work style of delivering hardcopy documents and drawings. The major research contents of NuIDEAS are the advancement of design processes by computerization, the establishment of design database and 3 dimensional visualization of design data. KSNP (Korea Standard Nuclear Power Plant) is the target of legacy database and 3 dimensional model, so that can be utilized in the next plant design. In the first year, the blueprint of NuIDEAS is proposed, and its prototype is developed by applying the rapidly revolutionizing computer technology. The major results of the first year research were to establish the architecture of the integrated database ensuring data consistency, and to build design database of reactor coolant system and heavy components. Also various softwares were developed to search, share and utilize the data through networks, and the detailed 3 dimensional CAD models of nuclear fuel and heavy components were constructed, and walk-through simulation using the models are developed. This report contains the major additions and modifications to the object oriented database and associated program, using methods and Javascript.. (author). 36 refs., 1 tab., 32 figs.

  15. The forum as a friend: parental mental illness and communication on open Internet forums.

    Science.gov (United States)

    Widemalm, My; Hjärthag, Fredrik

    2015-10-01

    The aim of this study was to identify how daughters or sons to parents suffering from mental illness perceive their situation. The objective was to provide new knowledge based on what they communicate on open Internet forums. The sample consisted of forum posts written by individuals who reported that they had mentally ill parents. Data collection comprised 301 comments from 35 forum threads on 5 different Swedish Internet forums, and predetermined inclusion criteria were used. Data were analyzed qualitatively using thematic analysis. The analysis generated four themes: "Caregiver burden," "Knowledge seeking," "Support from the forum," and "Frustration and powerlessness over health care." The results showed that parents' mental illness affected the forum writers on several levels, and they often felt stigmatized. The writers often lacked knowledge of their parents' mental illness and sought out Internet forums for information and support from peers in similar situations. The psychiatric care given to the parents was a source of dissatisfaction among the forum writers, who often felt that their parents did not receive adequate care. This study shows that fear of stigmatization and perceived lack of care and support caused forum writers to anonymously seek out Internet forums for information and support from others with similar experiences. The role of social support and the attractiveness of anonymity and availability typical for open Internet forums ought to be considered by health care professionals and researchers when developing new ways for providing support for children or adolescents with a mentally ill parent.

  16. Ethical Issues in Network System Design

    Directory of Open Access Journals (Sweden)

    Duncan Langford

    1997-05-01

    Full Text Available Today, most desktop computers and PCs are networked that is, they have the ability to link to other machines, usually to access data and other information held remotely. Such machines may sometimes be connected directly to each other, as part of an office or company computer system. More frequently, however, connected machines are at a considerable distance from each other, typically connected through links to global systems such as the Internet, or World Wide Web (WWW. The networked machine itself may be anything from a powerful company computer with direct Internet connections, to a small hobbyist machine, accessing a bulletin board through telephone and modem. It is important to remember that, whatever the type or the location of networked machines, their access to the network, and the network itself, was planned and constructed following deliberate design considerations. In this paper I discuss some ways in which the technical design of computer systems might appropriately be influenced by ethical issues, and examine pressures on computer scientists and others to technically control network related actions perceived as 'unethical'. After examination of the current situation, I draw together the issues, and conclude by suggesting some ethically based recommendations for the future design of networked systems.

  17. Comparisons of luminaires: Efficacies and system design

    Energy Technology Data Exchange (ETDEWEB)

    Albright, L.D.; Both, A.J. [Cornell Univ., Ithaca, NY (United States)

    1994-12-31

    After reviewing basic information, three design examples have been presented to demonstrate a process of supplemental lighting design. The sequences of each example suggest careful thought and analysis are required to obtain supplemental lighting designs that provide both high levels of PAR and suitable uniformity. The end results should suggest how an analysis can evolve to achieve desired results, and the types of tools and adjustments required. It appears possible to design research greenhouses and plant growth chambers to achieve a {+-}10% PAR uniformity using HIPS luminaires. Further, HPS luminaires (and, by extension, NEHD, etc.) are required to achieve high PAR levels and have the decided advantage of providing the possibility of aiming, which reduces the region of the {open_quotes}edge effect{close_quotes}. Further, for designing plant lighting systems, a modification of the standard IES luminaire data file structure is potentially useful. Luminaire installation is an important factor to obtain PAR uniformity. Spacing and mounting height are critically important. Additionally, the mounting angle of each luminaire must be carefully adjusted to conform with design assumptions. This is true for both plant growth chambers and greenhouses. Surface reflectances are particularly important when designing for small lighted regions such as plant growth chambers and research greenhouses. It is not obvious, just from looking at a surface, what its reflectance is. It is suggested that an effort be mounted to develop valid surface reflectance data to be used by designers. The importance of the surfaces (particularly the walls) in achieving PAR uniformity suggests the importance of periodic cleaning/maintenance to retain initial reflectance values.

  18. System reduction for nanoscale IC design

    CERN Document Server

    2017-01-01

    This book describes the computational challenges posed by the progression toward nanoscale electronic devices and increasingly short design cycles in the microelectronics industry, and proposes methods of model reduction which facilitate circuit and device simulation for specific tasks in the design cycle. The goal is to develop and compare methods for system reduction in the design of high dimensional nanoelectronic ICs, and to test these methods in the practice of semiconductor development. Six chapters describe the challenges for numerical simulation of nanoelectronic circuits and suggest model reduction methods for constituting equations. These include linear and nonlinear differential equations tailored to circuit equations and drift diffusion equations for semiconductor devices. The performance of these methods is illustrated with numerical experiments using real-world data. Readers will benefit from an up-to-date overview of the latest model reduction methods in computational nanoelectronics.

  19. Supporting Space Systems Design via Systems Dependency Analysis Methodology

    Science.gov (United States)

    Guariniello, Cesare

    The increasing size and complexity of space systems and space missions pose severe challenges to space systems engineers. When complex systems and Systems-of-Systems are involved, the behavior of the whole entity is not only due to that of the individual systems involved but also to the interactions and dependencies between the systems. Dependencies can be varied and complex, and designers usually do not perform analysis of the impact of dependencies at the level of complex systems, or this analysis involves excessive computational cost, or occurs at a later stage of the design process, after designers have already set detailed requirements, following a bottom-up approach. While classical systems engineering attempts to integrate the perspectives involved across the variety of engineering disciplines and the objectives of multiple stakeholders, there is still a need for more effective tools and methods capable to identify, analyze and quantify properties of the complex system as a whole and to model explicitly the effect of some of the features that characterize complex systems. This research describes the development and usage of Systems Operational Dependency Analysis and Systems Developmental Dependency Analysis, two methods based on parametric models of the behavior of complex systems, one in the operational domain and one in the developmental domain. The parameters of the developed models have intuitive meaning, are usable with subjective and quantitative data alike, and give direct insight into the causes of observed, and possibly emergent, behavior. The approach proposed in this dissertation combines models of one-to-one dependencies among systems and between systems and capabilities, to analyze and evaluate the impact of failures or delays on the outcome of the whole complex system. The analysis accounts for cascading effects, partial operational failures, multiple failures or delays, and partial developmental dependencies. The user of these methods can

  20. Designing Inclusive Systems Designing Inclusion for Real-world Applications

    CERN Document Server

    Clarkson, John; Robinson, Peter; Lazar, Jonathan; Heylighen, Ann

    2012-01-01

    The Cambridge Workshops on Universal Access and Assistive Technology (CWUAAT) are a series of workshops held at a Cambridge University College every two years. The workshop theme: “Designing inclusion for real-world applications” refers to the emerging potential and relevance of the latest generations of inclusive design thinking, tools, techniques, and data, to mainstream project applications such as healthcare and the design of working environments. Inclusive Design Research involves developing tools and guidance enabling product designers to design for the widest possible population, for a given range of capabilities. There are five main themes: •Designing for the Real-World •Measuring Demand And Capabilities •Designing Cognitive Interaction with Emerging Technologies •Design for Inclusion •Designing Inclusive Architecture In the tradition of CWUAAT, we have solicited and accepted contributions over a wide range of topics, both within individual themes and also across the workshop’s scope. ...

  1. ROUTE PLAN DESIGNER FOR TRACTOR GUIDANCE SYSTEMS

    DEFF Research Database (Denmark)

    Sveistrup, Daniel; Jørgensen, Rasmus Nyholm; Green, Ole

    2010-01-01

    Earlier works have shown field trial designs to be very labor extensive, even when combining autoguidancesystems with conventional machinery.Designing routes for semi-automated systems in a controlled manner is both resource demandingand complicated. Different types of auto-guidance systems vary...... in their file formats and operationalrequirements, thereby creating an unnecessary burden for the field trial managers and researchersoperating on different computational platforms such as Windows, Mac or Linux.This paper demonstrates a methodological proof of concept for a software solution for assisting...... thedevelopment and deployment of georeferenced routes to be used for full scale field trial designsassisted by auto-steering solutions, including the steps needed to lay out the full scale multitreatmentsetups, georeference these setups via Google Earth and transfer them to an auto-guidancetractor computer...

  2. Design for Reliability of Power Electronic Systems

    DEFF Research Database (Denmark)

    Wang, Huai; Ma, Ke; Blaabjerg, Frede

    2012-01-01

    Advances in power electronics enable efficient and flexible processing of electric power in the application of renewable energy sources, electric vehicles, adjustable-speed drives, etc. More and more efforts are devoted to better power electronic systems in terms of reliability to ensure high...... availability, long lifetime, sufficient robustness, low maintenance cost and low cost of energy. However, the reliability predictions are still dominantly according to outdated models and terms, such as MIL-HDBK-217F handbook models, Mean-Time-To-Failure (MTTF), and Mean-Time-Between-Failures (MTBF......). A collection of methodologies based on Physics-of-Failure (PoF) approach and mission profile analysis are presented in this paper to perform reliability-oriented design of power electronic systems. The corresponding design procedures and reliability prediction models are provided. Further on, a case study...

  3. Progress in multirate digital control system design

    Science.gov (United States)

    Berg, Martin C.; Mason, Gregory S.

    1991-01-01

    A new methodology for multirate sampled-data control design based on a new generalized control law structure, two new parameter-optimization-based control law synthesis methods, and a new singular-value-based robustness analysis method are described. The control law structure can represent multirate sampled-data control laws of arbitrary structure and dynamic order, with arbitrarily prescribed sampling rates for all sensors and update rates for all processor states and actuators. The two control law synthesis methods employ numerical optimization to determine values for the control law parameters. The robustness analysis method is based on the multivariable Nyquist criterion applied to the loop transfer function for the sampling period equal to the period of repetition of the system's complete sampling/update schedule. The complete methodology is demonstrated by application to the design of a combination yaw damper and modal suppression system for a commercial aircraft.

  4. Design for Reliability in Renewable Energy Systems

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Zhou, Dao; Sangwongwanich, Ariya

    2017-01-01

    Power electronics are widely used in renewable energy systems to achieve lower cost of energy, higher efficiency and high power density. At the same time, the high reliability of the power electronics products is demanded, in order to reduce the failure rates and ensure cost-effective operation...... of the renewable energy systems. This paper thus describes the basic concepts used in reliability engineering, and presents the status and future trends of Design for Reliability (DfR) in power electronics, which is currently undergoing a paradigm shift to a physics-of-failure approach. Two case studies of a 2 MW...

  5. The ISABELLE Control System: Design Concepts

    Energy Technology Data Exchange (ETDEWEB)

    Humphrey, J. W.

    1979-01-01

    ISABELLE is a Department of Energy funded proton accelerator/storage ring being built at Brookhaven National Laboratory (Upton, Long Island, New York). It is large (3.8 km circumference) and complicated (approx. 30,000 monitor and control variables). It is based on superconducting technology. Following the example of previous accelerators, ISABELLE will be operated from a single control center. The control system will be distributed and will incorporate a local computer network. An overview of the conceptual design of the ISABELLE control system will be presented.

  6. Propagation handbook for wireless communication system design

    CERN Document Server

    Crane, Robert K

    2003-01-01

    PROPAGATION PHENOMENA AFFECTING WIRELESS SYSTEMS Types of SystemsDesign Criteria Antenna Considerations Propagation Effects Propagation Models Model Verification Statistics and RiskList of Symbols ReferencesPROPAGATION FUNDAMENTALSMaxwell's EquationsPlane Waves Spherical Waves Reflection and Refraction Geometrical OpticsRay TracingScalar Diffraction Theory Geometrical Theory of Diffraction List of Symbols ReferencesABSORPTION Molecular Absorption Absorption on a Slant Path ACTS Statistics List of Symbols ReferencesREFRACTION Ray BendingPath Delay ScintillationList of Symbols ReferencesATTENUAT

  7. Reconfigurable Manufacturing System Design and Implementation

    DEFF Research Database (Denmark)

    Hadar, Ronen; Bilberg, Arne

    2013-01-01

    Reconfigurable Manufacturing Systems (RMS) have been an increasing area of interest in the research arena. However, it seems that current literature is lacking application and implementation cases where RMS are simulated, tested, and evaluated as a feasible manufacturing concept. A Manufacturer...... is meant primarily to show the physical feasibility of the system and provide a first-look into a real production application of the RMS ideas. The purpose of this paper is to present the design of the manufacturer’s RMS proof of concept, its implementation, and evaluation results....

  8. Cluster systems integration. [for Skylab design

    Science.gov (United States)

    Hagood, C. C.; Timmons, K. P.

    1974-01-01

    The cluster systems integration program of Skylab is reviewed with attention to its hardware, management interfaces, mission requirements control, and baseline planning documentation. The responsibilities of the interdiscipline and intercenter technical working groups and panels participating in the program are discussed. The five phases of the program are identified as Wet and Dry Workshop studies and Skylab Program Specification; requirements synthesis and the start of formal configuration management; compatibility assessment and control; design verification; and prelaunch and mission support operations. It is indicated that the cluster systems integration is a vital key element in the development and implementation of the Skylab space station.

  9. Design of Wind Turbine Vibration Monitoring System

    Directory of Open Access Journals (Sweden)

    Shoubin Wang

    2013-04-01

    Full Text Available In order to ensure safety of wind turbine operation and to reduce the occurrence of faults as well as to improve the reliability of wind turbine operation, a vibration monitoring for wind turbine is developed. In this paper, it analyses the enlargement of all the parts of the structure and the working mechanism, the research method of wind turbine operation vibration is introduced, with the focus being the use of the sensor principle. Finally the hardware design and software of this system is introduced and the main function of this system is described, which realizes condition monitoring of the work state of wind turbines.

  10. Controller Design Considerations for ACM APFC Systems

    Directory of Open Access Journals (Sweden)

    Alexander Abramovitz

    2012-01-01

    Full Text Available This paper is concerned with performance of the current shaping network in Average Current Mode (ACM Active Power Factor Correction (APFC systems. Theoretical expressions for the ripple components are derived. Then, ripple interaction and impact on the current loop reference signal are investigated. A modification of the controller network is suggested that results in an improved Total Harmonic Distortion (THD. Design guidelines are suggested. The theoretical predictions were validated by simulation.

  11. Basic design principles of colorimetric vision systems

    Science.gov (United States)

    Mumzhiu, Alex M.

    1998-10-01

    Color measurement is an important part of overall production quality control in textile, coating, plastics, food, paper and other industries. The color measurement instruments such as colorimeters and spectrophotometers, used for production quality control have many limitations. In many applications they cannot be used for a variety of reasons and have to be replaced with human operators. Machine vision has great potential for color measurement. The components for color machine vision systems, such as broadcast quality 3-CCD cameras, fast and inexpensive PCI frame grabbers, and sophisticated image processing software packages are available. However the machine vision industry has only started to approach the color domain. The few color machine vision systems on the market, produced by the largest machine vision manufacturers have very limited capabilities. A lack of understanding that a vision based color measurement system could fail if it ignores the basic principles of colorimetry is the main reason for the slow progress of color vision systems. the purpose of this paper is to clarify how color measurement principles have to be applied to vision systems and how the electro-optical design features of colorimeters have to be modified in order to implement them for vision systems. The subject of this presentation far exceeds the limitations of a journal paper so only the most important aspects will be discussed. An overview of the major areas of applications for colorimetric vision system will be discussed. Finally, the reasons why some customers are happy with their vision systems and some are not will be analyzed.

  12. Computation and design of autonomous intelligent systems

    Science.gov (United States)

    Fry, Robert L.

    2008-04-01

    This paper describes a theory of intelligent systems and its reduction to engineering practice. The theory is based on a broader theory of computation wherein information and control are defined within the subjective frame of a system. At its most primitive level, the theory describes what it computationally means to both ask and answer questions which, like traditional logic, are also Boolean. The logic of questions describes the subjective rules of computation that are objective in the sense that all the described systems operate according to its principles. Therefore, all systems are autonomous by construct. These systems include thermodynamic, communication, and intelligent systems. Although interesting, the important practical consequence is that the engineering framework for intelligent systems can borrow efficient constructs and methodologies from both thermodynamics and information theory. Thermodynamics provides the Carnot cycle which describes intelligence dynamics when operating in the refrigeration mode. It also provides the principle of maximum entropy. Information theory has recently provided the important concept of dual-matching useful for the design of efficient intelligent systems. The reverse engineered model of computation by pyramidal neurons agrees well with biology and offers a simple and powerful exemplar of basic engineering concepts.

  13. SHARK-NIR system design analysis overview

    Science.gov (United States)

    Viotto, Valentina; Farinato, Jacopo; Greggio, Davide; Vassallo, Daniele; Carolo, Elena; Baruffolo, Andrea; Bergomi, Maria; Carlotti, Alexis; De Pascale, Marco; D'Orazi, Valentina; Fantinel, Daniela; Magrin, Demetrio; Marafatto, Luca; Mohr, Lars; Ragazzoni, Roberto; Salasnich, Bernardo; Verinaud, Christophe

    2016-08-01

    In this paper, we present an overview of the System Design Analysis carried on for SHARK-NIR, the coronagraphic camera designed to take advantage of the outstanding performance that can be obtained with the FLAO facility at the LBT, in the near infrared regime. Born as a fast-track project, the system now foresees both coronagraphic direct imaging and spectroscopic observing mode, together with a first order wavefront correction tool. The analysis we here report includes several trade-offs for the selection of the baseline design, in terms of optical and mechanical engineering, and the choice of the coronagraphic techniques to be implemented, to satisfy both the main scientific drivers and the technical requirements set at the level of the telescope. Further care has been taken on the possible exploitation of the synergy with other LBT instrumentation, like LBTI. A set of system specifications is then flown down from the upper level requirements to finally ensure the fulfillment of the science drivers. The preliminary performance budgets are presented, both in terms of the main optical planes stability and of the image quality, including the contributions of the main error sources in different observing modes.

  14. Warehouses information system design and development

    Science.gov (United States)

    Darajatun, R. A.; Sukanta

    2017-12-01

    Materials/goods handling industry is fundamental for companies to ensure the smooth running of their warehouses. Efficiency and organization within every aspect of the business is essential in order to gain a competitive advantage. The purpose of this research is design and development of Kanban of inventory storage and delivery system. Application aims to facilitate inventory stock checks to be more efficient and effective. Users easily input finished goods from production department, warehouse, customer, and also suppliers. Master data designed as complete as possible to be prepared applications used in a variety of process logistic warehouse variations. The author uses Java programming language to develop the application, which is used for building Java Web applications, while the database used is MySQL. System development methodology that I use is the Waterfall methodology. Waterfall methodology has several stages of the Analysis, System Design, Implementation, Integration, Operation and Maintenance. In the process of collecting data the author uses the method of observation, interviews, and literature.

  15. Optimal Ground Source Heat Pump System Design

    Energy Technology Data Exchange (ETDEWEB)

    Ozbek, Metin [Environ Holdings Inc., Princeton, NJ (United States); Yavuzturk, Cy [Univ. of Hartford, West Hartford, CT (United States); Pinder, George [Univ. of Vermont, Burlington, VT (United States)

    2015-04-01

    Despite the facts that GSHPs first gained popularity as early as the 1940’s and they can achieve 30 to 60 percent in energy savings and carbon emission reductions relative to conventional HVAC systems, the use of geothermal energy in the U.S. has been less than 1 percent of the total energy consumption. The key barriers preventing this technically-mature technology from reaching its full commercial potential have been its high installation cost and limited consumer knowledge and trust in GSHP systems to deliver the technology in a cost-effective manner in the market place. Led by ENVIRON, with support from University Hartford and University of Vermont, the team developed and tested a software-based a decision making tool (‘OptGSHP’) for the least-cost design of ground-source heat pump (‘GSHP’) systems. OptGSHP combines state of the art optimization algorithms with GSHP-specific HVAC and groundwater flow and heat transport simulation. The particular strength of OptGSHP is in integrating heat transport due to groundwater flow into the design, which most of the GSHP designs do not get credit for and therefore are overdesigned.

  16. Advanced design of local ventilation systems

    Energy Technology Data Exchange (ETDEWEB)

    Kulmala, I. [VTT Manufacturing Technology, Espoo (Finland). Safety Technology

    1997-12-31

    Local ventilation is widely used in industry for controlling airborne contaminants. However, the present design practices of local ventilation systems are mainly based on empirical equations and do not take quantitatively into account the various factors affecting the performance of these systems. The aim of this study was to determine the applicability and limitations of more advanced fluid mechanical methods to the design and development of local ventilation systems. The most important factors affecting the performance of local ventilation systems were determined and their effect was studied in a systematic manner. The numerical calculations were made with the FLUENT computer code and they were verified by laboratory experiments, previous measurements or analytical solutions. The results proved that the numerical calculations can provide a realistic simulation of exhaust openings, effects of ambient air flows and wake regions. The experiences with the low-velocity local supply air showed that these systems can also be modelled fairly well. The results were used to improve the efficiency and thermal comfort of a local ventilation unit and to increase the effective control range of exhaust hoods. In the simulation of the interaction of a hot buoyant source and local exhaust, the predicted capture efficiencies were clearly higher than those observed experimentally. The deviations between measurements and non-isothermal flow calculations may have partly been caused by the inability to achieve grid independent solutions. CFD simulations is an advanced and flexible tool for designing and developing local ventilation. The simulations can provide insight into the time-averaged flow field which may assist us in understanding the observed phenomena and to explain experimental results. However, for successful calculations the applicability and limitations of the models must be known. (orig.) 78 refs.

  17. Complex Systems Design & Management : Proceedings of the Second International Conference on Complex Systems Design & Management

    CERN Document Server

    Krob, Daniel; Voirin, Jean-Luc

    2012-01-01

    This book contains all refereed papers that were accepted to the second edition of the « Complex Systems Design & Management » (CSDM 2011) international conference that took place in Paris (France) from December 7 to December 9, 2011. (Website: http://www.csdm2011.csdm.fr/). These proceedings cover the most recent trends in the emerging field of complex systems sciences & practices from an industrial and academic perspective, including the main industrial domains (transport, defense & security, electronics, energy & environment, e-services), scientific & technical topics (systems fundamentals, systems architecture& engineering, systems metrics & quality, systemic  tools) and system types (transportation systems, embedded systems, software & information systems, systems of systems, artificial ecosystems). The CSDM 2011 conference is organized under the guidance of the CESAMES non-profit organization (http://www.cesames.net/).

  18. Complex Systems Design & Management : Proceedings of the Third International Conference on Complex Systems Design & Management

    CERN Document Server

    Caseau, Yves; Krob, Daniel; Rauzy, Antoine

    2013-01-01

    This book contains all refereed papers that were accepted to the third edition of the « Complex Systems Design & Management » (CSD&M 2012) international conference that took place in Paris (France) from December 12-14, 2012. (Website: http://www.csdm2012.csdm.fr)  These proceedings cover the most recent trends in the emerging field of complex systems sciences & practices from an industrial and academic perspective, including the main industrial domains (transport, defense & security, electronics, energy & environment, e-services), scientific & technical topics (systems fundamentals, systems architecture& engineering, systems metrics & quality, systemic  tools) and system types (transportation systems, embedded systems, software & information systems, systems of systems, artificial ecosystems). The CSD&M 2012 conference is organized under the guidance of the CESAMES non-profit organization (http://www.cesames.net).

  19. From Autonomous Systems to Sociotechnical Systems: Designing Effective Collaborations

    Directory of Open Access Journals (Sweden)

    Kyle J. Behymer

    Full Text Available Effectiveness in sociotechnical systems often depends on coordination among multiple agents (including both humans and autonomous technologies. This means that autonomous technologies must be designed to function as collaborative systems, or team players. In many complex work domains, success is beyond the capabilities of humans unaided by technologies. However, at the same time, human capabilities are often critical to ultimate success, as all automated control systems will eventually face problems their designers did not anticipate. Unfortunately, there is often an either/or attitude with respect to humans and technology that tends to focus on optimizing the separate human and autonomous components, with the design of interfaces and team processes as an afterthought. The current paper discusses the limitations of this approach and proposes an alternative where the goal of design is a seamless integration of human and technological capabilities into a well-functioning sociotechnical system. Drawing lessons from both the academic (SRK Framework and commercial (IBM’s Watson, video games worlds, suggestions for enriching the coupling between the human and automated systems by considering both technical and social aspects are discussed.

  20. Beyond Learning Management Systems: Designing for Interprofessional Knowledge Building in the Health Sciences

    Science.gov (United States)

    Lax, Leila; Scardamalia, Marlene; Watt-Watson, Judy; Hunter, Judith; Bereiter, Carl

    2010-01-01

    This paper examines theoretical, pedagogical, and technological differences between two technologies that have been used in undergraduate interprofessional health sciences at the University of Toronto. One, a learning management system, WebCT 2.0, supports online coursework. The other, a Knowledge Building environment, Knowledge Forum 2.0,…

  1. MAP Attitude Control System Design and Analysis

    Science.gov (United States)

    Andrews, S. F.; Campbell, C. E.; Ericsson-Jackson, A. J.; Markley, F. L.; ODonnell, J. R., Jr.

    1997-01-01

    The Microwave Anisotropy Probe (MAP) is a follow-on to the Differential Microwave Radiometer (DMR) instrument on the Cosmic Background Explorer (COBE) spacecraft. The MAP spacecraft will perform its mission in a Lissajous orbit around the Earth-Sun L(sub 2) Lagrange point to suppress potential instrument disturbances. To make a full-sky map of cosmic microwave background fluctuations, a combination fast spin and slow precession motion will be used. MAP requires a propulsion system to reach L(sub 2), to unload system momentum, and to perform stationkeeping maneuvers once at L(sub 2). A minimum hardware, power and thermal safe control mode must also be provided. Sufficient attitude knowledge must be provided to yield instrument pointing to a standard deviation of 1.8 arc-minutes. The short development time and tight budgets require a new way of designing, simulating, and analyzing the Attitude Control System (ACS). This paper presents the design and analysis of the control system to meet these requirements.

  2. UWB Tracking System Design with TDOA Algorithm

    Science.gov (United States)

    Ni, Jianjun; Arndt, Dickey; Ngo, Phong; Phan, Chau; Gross, Julia; Dusl, John; Schwing, Alan

    2006-01-01

    This presentation discusses an ultra-wideband (UWB) tracking system design effort using a tracking algorithm TDOA (Time Difference of Arrival). UWB technology is exploited to implement the tracking system due to its properties, such as high data rate, fine time resolution, and low power spectral density. A system design using commercially available UWB products is proposed. A two-stage weighted least square method is chosen to solve the TDOA non-linear equations. Matlab simulations in both two-dimensional space and three-dimensional space show that the tracking algorithm can achieve fine tracking resolution with low noise TDOA data. The error analysis reveals various ways to improve the tracking resolution. Lab experiments demonstrate the UWBTDOA tracking capability with fine resolution. This research effort is motivated by a prototype development project Mini-AERCam (Autonomous Extra-vehicular Robotic Camera), a free-flying video camera system under development at NASA Johnson Space Center for aid in surveillance around the International Space Station (ISS).

  3. Designing Microporus Carbons for Hydrogen Storage Systems

    Energy Technology Data Exchange (ETDEWEB)

    Alan C. Cooper

    2012-05-02

    An efficient, cost-effective hydrogen storage system is a key enabling technology for the widespread introduction of hydrogen fuel cells to the domestic marketplace. Air Products, an industry leader in hydrogen energy products and systems, recognized this need and responded to the DOE 'Grand Challenge' solicitation (DOE Solicitation DE-PS36-03GO93013) under Category 1 as an industry partner and steering committee member with the National Renewable Energy Laboratory (NREL) in their proposal for a center-of-excellence on Carbon-Based Hydrogen Storage Materials. This center was later renamed the Hydrogen Sorption Center of Excellence (HSCoE). Our proposal, entitled 'Designing Microporous Carbons for Hydrogen Storage Systems,' envisioned a highly synergistic 5-year program with NREL and other national laboratory and university partners.

  4. Feasibility study of an Integrated Program for Aerospace vehicle Design (IPAD). Volume 4: IPAD system design

    Science.gov (United States)

    Goldfarb, W.; Carpenter, L. C.; Redhed, D. D.; Hansen, S. D.; Anderson, L. O.; Kawaguchi, A. S.

    1973-01-01

    The computing system design of IPAD is described and the requirements which form the basis for the system design are discussed. The system is presented in terms of a functional design description and technical design specifications. The functional design specifications give the detailed description of the system design using top-down structured programming methodology. Human behavioral characteristics, which specify the system design at the user interface, security considerations, and standards for system design, implementation, and maintenance are also part of the technical design specifications. Detailed specifications of the two most common computing system types in use by the major aerospace companies which could support the IPAD system design are presented. The report of a study to investigate migration of IPAD software between the two candidate 3rd generation host computing systems and from these systems to a 4th generation system is included.

  5. SAFARI optical system architecture and design concept

    Science.gov (United States)

    Pastor, Carmen; Jellema, Willem; Zuluaga-Ramírez, Pablo; Arrazola, David; Fernández-Rodriguez, M.; Belenguer, Tomás.; González Fernández, Luis M.; Audley, Michael D.; Evers, Jaap; Eggens, Martin; Torres Redondo, Josefina; Najarro, Francisco; Roelfsema, Peter

    2016-07-01

    SpicA FAR infrared Instrument, SAFARI, is one of the instruments planned for the SPICA mission. The SPICA mission is the next great leap forward in space-based far-infrared astronomy and will study the evolution of galaxies, stars and planetary systems. SPICA will utilize a deeply cooled 2.5m-class telescope, provided by European industry, to realize zodiacal background limited performance, and high spatial resolution. The instrument SAFARI is a cryogenic grating-based point source spectrometer working in the wavelength domain 34 to 230 μm, providing spectral resolving power from 300 to at least 2000. The instrument shall provide low and high resolution spectroscopy in four spectral bands. Low Resolution mode is the native instrument mode, while the high Resolution mode is achieved by means of a Martin-Pupplet interferometer. The optical system is all-reflective and consists of three main modules; an input optics module, followed by the Band and Mode Distributing Optics and the grating Modules. The instrument utilizes Nyquist sampled filled linear arrays of very sensitive TES detectors. The work presented in this paper describes the optical design architecture and design concept compatible with the current instrument performance and volume design drivers.

  6. Set membership experimental design for biological systems

    Directory of Open Access Journals (Sweden)

    Marvel Skylar W

    2012-03-01

    Full Text Available Abstract Background Experimental design approaches for biological systems are needed to help conserve the limited resources that are allocated for performing experiments. The assumptions used when assigning probability density functions to characterize uncertainty in biological systems are unwarranted when only a small number of measurements can be obtained. In these situations, the uncertainty in biological systems is more appropriately characterized in a bounded-error context. Additionally, effort must be made to improve the connection between modelers and experimentalists by relating design metrics to biologically relevant information. Bounded-error experimental design approaches that can assess the impact of additional measurements on model uncertainty are needed to identify the most appropriate balance between the collection of data and the availability of resources. Results In this work we develop a bounded-error experimental design framework for nonlinear continuous-time systems when few data measurements are available. This approach leverages many of the recent advances in bounded-error parameter and state estimation methods that use interval analysis to generate parameter sets and state bounds consistent with uncertain data measurements. We devise a novel approach using set-based uncertainty propagation to estimate measurement ranges at candidate time points. We then use these estimated measurements at the candidate time points to evaluate which candidate measurements furthest reduce model uncertainty. A method for quickly combining multiple candidate time points is presented and allows for determining the effect of adding multiple measurements. Biologically relevant metrics are developed and used to predict when new data measurements should be acquired, which system components should be measured and how many additional measurements should be obtained. Conclusions The practicability of our approach is illustrated with a case study. This

  7. The Decision-Makers' Forum on a new paradigm for nuclear energy -- Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Motloch, C.G.

    1998-09-14

    The Decision-Makers' Forum on a New Paradigm for Nuclear Energy was created in response to the challenge by Sen. Pete V. Domenici to begin, ``a new dialogue with serious discussion about the full range of nuclear technologies.'' Sponsored by the Senate Nuclear Issues Caucus, the Forum was organized and facilitated by the Idaho National Engineering and Environmental Laboratory. The participants were decision-makers and key staff from industry, government, the national laboratories, academia and professional societies. Overall, the Forum was designed to capture the ideas of a large number of decision-makers about the high priority actions recommended to help set a new national agenda for nuclear energy. The Forum recommended 10 priority actions toward this end.

  8. The Decision-Makers Forum on a new Paradigm for Nuclear Energy, Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Motloch, Chester George

    1998-09-01

    The Decision-Makers' Forum on a New Paradigm for Nuclear Energy was created in response to the challenge by Sen. Pete V. Domenici to begin, "a new dialogue with serious discussion about the full range of nuclear technologies." Sponsored by the Senate Nuclear Issues Caucus, the Forum was organized and facilitated by the Idaho National Engineering and Environmental Laboratory. The participants were decision-makers and key staff from industry, government, the national laboratories, academia and professional societies. Overall, the Forum was designed to capture the ideas of a large number of decision-makers about the high priority actions recommended to help set a new national agenda for nuclear energy. The Forum recommended 10 priority actions toward this end.

  9. Low-level Waste Forum meeting report. Fall meeting, October 20--22, 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-31

    The Low-Level Radioactive Waste Forum is an association of representatives of states and compacts established to facilitate state and compact commission implementation of the Low-Level Radioactive Waste Policy Act of 1980 and the Low-Level Radioactive Waste Policy Amendments Act of 1985 and to promote the objectives of low-level radioactive waste regional compacts. The Forum provides an opportunity for states and compacts to share information with one another and to exchange views with officials of federal agencies. The Forum participants include representatives from regional compacts, designated host states, unaffiliated states, and states with currently-operating low-level radioactive waste facilities. This report contains information synthesizing the accomplishments of the Forum, as well as any new advances that have been made in the management of low-level radioactive wastes.

  10. Low-Level Waste Forum meeting report. Quarterly meeting, July 23--24, 1990

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-12-31

    The Low-Level Radioactive Waste Forum is an association of representatives of states and compacts established to facilitate state and compact commission implementation of the Low-Level Radioactive Waste Policy Act of 1980 and the Low-Level Radioactive Waste Policy Amendments Act of 1985 and to promote the objectives of low-level radioactive waste regional compacts. The Forum provides an opportunity for states and compacts to share information with one another and to exchange views with officials of federal agencies. The Forum participants include representatives from regional compacts, designated host states, unaffiliated states, and states with currently-operating low-level radioactive waste facilities. This report contains information synthesizing the accomplishments of the Forum, as well as any new advances that have been made in the management of low-level radioactive wastes.

  11. Low-Level Waste Forum meeting report. Quarterly meeting, April 25--27, 1990

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-12-31

    The Low-Level Radioactive Waste Forum is an association of representatives of states and compacts established to facilitate state and compact commission implementation of the Low-Level Radioactive Waste Policy Act of 1980 and the Low-Level Radioactive Waste Policy Amendments Act of 1985 and to promote the objectives of low-level radioactive waste regional compacts. The Forum provides an opportunity for states and compacts to share information with one another and to exchange views with officials of federal agencies. The Forum participants include representatives from regional compacts, designated host states, unaffiliated states, and states with currently-operating low-level radioactive waste facilities. This report contains information synthesizing the accomplishments of the Forum, as well as any new advances that have been made in the management of low-level radioactive wastes.

  12. Low-level Waste Forum meeting report. Quarterly meeting, July 25--26, 1991

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-12-31

    The Low-Level Radioactive Waste Forum is an association of representatives of states and compacts established to facilitate state and compact commission implementation of the Low-Level Radioactive Waste Policy Act of 1980 and the Low-Level Radioactive Waste Policy Amendments Act of 1985 and to promote the objectives of low-level radioactive waste regional compacts. The Forum provides an opportunity for states and compacts to share information with one another and to exchange views with officials of federal agencies. The Forum participants include representatives from regional compacts, designated host states, unaffiliated states, and states with currently-operating low-level radioactive waste facilities. This report contains information synthesizing the accomplishments of the Forum, as well as any new advances that have been made in the management of low-level radioactive wastes.

  13. Designing an accurate system for temperature measurements

    Directory of Open Access Journals (Sweden)

    Kochan Orest

    2017-01-01

    Full Text Available The method of compensation of changes in temperature field along the legs of inhomogeneous thermocouple, which measures a temperature of an object, is considered in this paper. This compensation is achieved by stabilization of the temperature field along the thermocouple. Such stabilization does not allow the error due to acquired thermoelectric inhomogeneity to manifest itself. There is also proposed the design of the furnace to stabilize temperature field along the legs of the thermocouple which measures the temperature of an object. This furnace is not integrated with the thermocouple mentioned above, therefore it is possible to replace this thermocouple with a new one when it get its legs considerably inhomogeneous.. There is designed the two loop measuring system with the ability of error correction which can use simultaneously a usual thermocouple as well as a thermocouple with controlled profile of temperature field. The latter can be used as a reference sensor for the former.

  14. Nonlinear dynamics enabled systems design and control

    Science.gov (United States)

    Lacarbonara, Walter

    2012-08-01

    There is a growing interest towards design of high-performance structures and devices by seeking ways to exploit advantageously different nonlinearities at different scales rather than constraining operations to avoid nonlinear phenomena. Tools of robust nonlinear modeling and analysis are shown to be turned into design tools for achieving high levels of vibration control authority and synthesis of engineered systems and materials. A brief overview of methods and results on active resonance cancellation and passive nonlinear hysteretic vibration absorbers is illustrated. Recent results on the diffused hysteresis exhibited at the nano-microscale in nanocomposites due to the powerful nonlinear stick-slip mechanism exhibited by carbon nanotubes dispersed in a hosting matrix are discussed. The optimization of the main microstructural parameters is shown to lead to unprecedented levels of damping capacity in next-generation nanostructured materials tailored for wide-band vibrational energy dissipation.

  15. Design, modeling and control of nanopositioning systems

    CERN Document Server

    Fleming, Andrew J

    2014-01-01

    Covering the complete design cycle of nanopositioning systems, this is the first comprehensive text on the topic. The book first introduces concepts associated with nanopositioning stages and outlines their application in such tasks as scanning probe microscopy, nanofabrication, data storage, cell surgery and precision optics. Piezoelectric transducers, employed ubiquitously in nanopositioning applications are then discussed in detail including practical considerations and constraints on transducer response. The reader is then given an overview of the types of nanopositioner before the text turns to the in-depth coverage of mechanical design including flexures, materials, manufacturing techniques, and electronics. This process is illustrated by the example of a high-speed serial-kinematic nanopositioner. Position sensors are then catalogued and described and the text then focuses on control. Several forms of control are treated: shunt control, feedback control, force feedback control and feedforward control (...

  16. System design and control integration for advanced manufacturing

    CERN Document Server

    Li, Han-Xiong

    2014-01-01

    Most existing robust design books address design for static systems, or achieve robust design from experimental data via the Taguchi method. Little work considers model information for robust design particularly for the dynamic system. This book covers robust design for both static and dynamic systems using the nominal model information or the hybrid model/data information, and also integrates design with control under a large operating region. This design can handle strong nonlinearity and more uncertainties from model and parameters.

  17. Computer aided system for parametric design of combination die

    Science.gov (United States)

    Naranje, Vishal G.; Hussein, H. M. A.; Kumar, S.

    2017-09-01

    In this paper, a computer aided system for parametric design of combination dies is presented. The system is developed using knowledge based system technique of artificial intelligence. The system is capable to design combination dies for production of sheet metal parts having punching and cupping operations. The system is coded in Visual Basic and interfaced with AutoCAD software. The low cost of the proposed system will help die designers of small and medium scale sheet metal industries for design of combination dies for similar type of products. The proposed system is capable to reduce design time and efforts of die designers for design of combination dies.

  18. Designing a Secure Point-of-Sale System

    DEFF Research Database (Denmark)

    Sharp, Robin; Pedersen, Allan; Hedegaard, Anders

    2006-01-01

    This paper describes some experiences with using the ''Common Criteria for Information Security Evaluation'' as the basis for a design methodology when designing secure systems. As an example, the design process for a Point-of-Sale (POS) system is described.......This paper describes some experiences with using the ''Common Criteria for Information Security Evaluation'' as the basis for a design methodology when designing secure systems. As an example, the design process for a Point-of-Sale (POS) system is described....

  19. Members of the Forum Engelberg visit CERN

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    The Forum Engelberg is an annual interdisciplinary conference held in Engelberg, Switzerland intended to act as an international platform for debate and exchange of views on key issues affecting scientific research, technology, economics and philosophy. Its President is Hubert Curien - former French Minister of Research and Space Research, and President of the CERN Council from 1994 to 1996. Photo 01: Thérèse Wolf, Secretary of Forum Engelberg; Alain Hervé; Horst Wenninger; and Alexander Höchli, Forum member and former Landammann of the canton of Obwalden, at the CMS detector's assembly site.

  20. Suisse Romande forum meets at CERN

    CERN Document Server

    2005-01-01

    The subject of the «Forum des 100» meeting held at CERN on 9 June was «Suisse Romande: Une région en quête de succès» (a region in search of success). Organised by the magazine l'Hebdo and the Rezonance.ch association, the forum was attended by numerous representatives from politics, industry and education and consisted of a day of lectures and debates. Pascal Couchepin, Head of the Swiss Federal Department of Home Affairs, and Luc Ferry, philosopher and former French Education Minister, were among those who took part in the forum.

  1. Comparisons of luminaires: Efficacies and system design

    Science.gov (United States)

    Albright, L. D.; Both, A. J.

    1994-03-01

    Lighting designs for architectural (aesthetic) purposes, vision and safety, and plant growth have many features in common but several crucial ones that are not. The human eye is very sensitive to the color (wavelength) of light, whereas plants are less so. There are morphological reactions, particularly to the red and blue portions of the light spectrum but, in general, plants appear to accept and use light for photosynthesis everywhere over the PAR region of the spectrum. In contrast, the human eye interprets light intensity on a logarithmic scale, making people insensitive to significant differences of light intensity. As a rough rule, light intensity must change by 30 to 50% for the human eye to recognize the difference. Plants respond much more linearly to light energy, at least at intensities below photosynthetic saturation. Thus, intensity differences not noticeable to the human eye can have significant effects on total plant growth and yield, and crop timing. These factors make luminaire selection and lighting system design particularly important when designing supplemental lighting systems for plant growth. Supplemental lighting for plant growth on the scale of commercial greenhouses is a relatively expensive undertaking. Light intensities are often much higher than required for task (vision) lighting, which increases both installation and operating costs. However, and especially in the northern regions of the United States (and Canada, Europe, etc.), supplemental lighting during winter may be necessary to produce certain crops (e.g., tomatoes) and very useful to achieve full plant growth potential and crop timing with most other greenhouse crops. Operating costs over the life of a luminaire typically will exceed the initial investment, making lighting efficacy a major consideration. This report reviews tests completed to evaluate the efficiencies of various commercially-available High-Pressure Sodium luminaires, and then describes the results of using a

  2. Haystack Antenna Control System Design Document

    Science.gov (United States)

    2010-12-07

    o ther p arts o f th e a ntenna s ystem th at th e c ontrol s ystem will in terface w ith. As a result, the control system design effort will result...compensator with rate feed forward applied. The m aintenance c omputer a nd poi nting c omputer m ay s witch be tween a ny of these compensators o n a p...nd m onitors t he 1 ube s ystem. S hould t he oi 11 evel i n t he r eservoir dr op be low t he minimum level for ope ration or t he flow s witches i

  3. Design of a knee orthosis locking system

    OpenAIRE

    Ramôa, Pedro Daniel Silva

    2012-01-01

    Dissertação de mestrado em Engenharia Mecatrónica The main goal of this work was to design a mechatronic locking system for a Stance Control Knee Ankle Foot Orthosis (SCKAFO). This mechanism should be able to perform two different functions. The first one is to lock the orthosis during the stance phase of human gait, in which contact between the foot and the ground exists. The second function deals with the unlock of the orthosis during the swing phase, in which there is no ...

  4. Turbo decoder core design for system development

    Science.gov (United States)

    Chen, Xiaoyi; Yao, Qingdong; Liu, Peng

    2003-04-01

    Due to their near Shannon-capacity performance, turbo codes have received a considerable amount of attention since their introduction. They are particularly attractive for cellular communication systems and have been included in the specifications for both the WCDMA(UMTS) and cdma2000 third-generation cellular standards. The log-MAP decoding algorithm and some technologies used to reduce the complexity have discussed in the past days. But we can see that if we apply the Turbo code to wireless communications,the decoding process rate is the bottleneck. The software implement is not realistic in today"s DSP process rate. So the hardware design is supposed to realize the decoding. The purpose of this paper is to present a full ASIC design way of Turbo decoding. Many technologies are added to the basic Log-MAP algorithm to simple the design and improve the performance. With the log-MAP algorithm, the Jacobi logarithm is computed exactly using max*()=ln(exp(x)+exp(y))=max()+fc(|y-x|),The correction function fc(|y-x|) is important because there will be 0.5dB SNR loss without it. The linear approximation can be used and the linear parameters was selected carefully to suit hardware realize in our design. In order to save the power consumption and also to assure the performance, the quantization is important in ASIC design, we adopt a compromise scheme to save the power and also there is good BER behaves. Many noisy frames can be corrected with a few iterations while some of the more noisy frames need to experience a full number of iterations (NOI). Thus, if the decoder could stop the iteration as soon as the frame becomes correct, the average NOI would be reduced. There are many ways to stop the iteration such as CRC, compare and so on, we adopt a significantly less computation and much less storage stop criteria. For long frames the memory for storing the entire frame of the forward probability α or the backward probability β can be very large. Available products all

  5. Variations of Speech Act Realizations in the Jakarta Post Readers' Forum

    OpenAIRE

    Sestiana, Sinta

    2013-01-01

    The research investigated variations of speech act realizations in The Jakarta Post readers' forum. The research focused on the speech acts found in The Jakarta Post readers' forum and the variations made when a speech act was realized by using a speech acts theory proposed by Bach and Harnish (1979). Based on the theory, speech acts are classified into four major categories in which each category consists of subcategories in a system namely, a taxonomy of communicative illocutionary acts. T...

  6. Impacts of Large Amounts of Wind Power on Design and Operation of Power Systems; Results of IEA Collaboration

    Energy Technology Data Exchange (ETDEWEB)

    Parsons, B. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Ela, E. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Holttinen, H. [VTT (Finland); Meibom, P. [DTU Riso (Denmark); Orths, A. [Energinet.dk (Denmark); O' Malley, M. [Univ. College Dubline (Ireland); Ummels, B. C. [Delft Univ. of Technology (Netherlands); Tande, J. [SINTEF (Norway); Estanqueiro, A. [INETI (Portugal); Gomez, E. [Univ. Castilla la Mancha (Spain); Smith, J. C. [Utility Wind Integration Group (UWIG), Reston, VA (United States)

    2008-06-01

    There are a multitude of studies completed and ongoing related to the cost of wind integration. However, the results are not easy to compare. An international forum for exchange of knowledge of power system impacts of wind power has been formed under the IEA Implementing Agreement on Wind Energy. IEA WIND R&D Task 25 on “Design and Operation of Power Systems with Large Amounts of Wind Power” produced a state-of-the-art report in October 2007, where the most relevant wind-power grid integration studies were analyzed, especially regarding methodologies and input data. This paper summarizes the results from 18 case studies, with discussion on differences in methodology as well as issues that have been identified to impact the cost of wind integration.

  7. 77 FR 15398 - Attentive Driving: Countermeasures for Distraction Forum

    Science.gov (United States)

    2012-03-15

    ... SAFETY BOARD Attentive Driving: Countermeasures for Distraction Forum The National Transportation Safety Board (NTSB) will convene a forum, Attentive Driving: Countermeasures for Distraction, which will begin... the forum, and all five NTSB Board Members will serve as members of the Board of Inquiry. The forum is...

  8. Design of laser diode stable output system

    Science.gov (United States)

    Liu, Bo; Cao, Rui-ming

    2008-03-01

    High-stability output's system of laser diode is introduced in this paper. The system which is based on the MCU of MSP430 has been designed light power feedback loop and coller of TEC. It includes stable current, protecting circuit, light power feedback loop, temperature controlling, power display and so on. It is also able to control and show the power at the real time. The power could be set by botton too. The software of slow start up, slow close and the protecting relay are adopted by MCU. DRV592 is introduced as PWM driver to control the current of TEC. The duty cycle is generate by MCU. In order to control temperature, it is changed to influence the current of TEC. The power that is sampled by photodiode which is integrated in the laser diode is controlled by the micro-processing. The laser is monitored by voltage control circuit and current control circuit at the real time.

  9. Synchronization Dynamics in a Designed Open System

    Science.gov (United States)

    Yokoshi, Nobuhiko; Odagiri, Kazuki; Ishikawa, Akira; Ishihara, Hajime

    2017-05-01

    We theoretically propose a unifying expression for synchronization dynamics between two-level constituents. Although synchronization phenomena require some substantial mediators, the distinct repercussions of their propagation delays remain obscure, especially in open systems. Our scheme directly incorporates the details of the constituents and mediators in an arbitrary environment. As one example, we demonstrate the synchronization dynamics of optical emitters on a dielectric microsphere. We reveal that the whispering gallery modes (WGMs) bridge the well-separated emitters and accelerate the synchronized fluorescence, known as superfluorescence. The emitters are found to overcome the significant and nonuniform retardation, and to build up their pronounced coherence by the WGMs, striking a balance between the roles of resonator and intermediary. Our work directly illustrates the dynamical aspects of many-body synchronizations and contributes to the exploration of research paradigms that consider designed open systems.

  10. Design of a Rainwater Catchment System

    Directory of Open Access Journals (Sweden)

    Neil Cammardella

    2011-01-01

    Full Text Available Certain dimensions of a rainwater catchment and storage system were optimized using climatological and sociological data. Using only daily demand and average daily rain fall data, the following dimensions were optimized: 1 The horizontal roof area needed to collect the daily demand of water, 2 The tank size needed to store all the water collected during a heavy rain event, 3 When full, how long the tank will be able to provide water without rain, and 4 The diameter of the outlet flow orifice. With these calculations, we can design a rainwater catchment system that can capture the daily demand and store excess water for use during periods of low rain.

  11. The design of the JUNO veto system

    Science.gov (United States)

    Lu, H.; Baussan, E.; experiment, JUNO

    2017-09-01

    The Jiangmen Underground Neutrino Observatory (JUNO) is a multipurpose 20 kton liquid scintillator detector. The detector will be built in a 700 m deep underground laboratory, and its primary physics goal will be to determine the neutrino mass hierarchy. Due to the low background requirement of the experiment, a multi-veto system for cosmic muon detection and background reduction is designed. The volume outside the central detector is filled with pure water and equipped with 2000 MCP-PMTs (20 inches) to form a water Cherenkov detector for muon tagging. A Top Tracker system will be built by re-using the Target Tracker plastic scintillator modules of the OPERA experiment and will cover half of the top area. This will provide valuable information for cosmic muon induced 9Li/8He study.

  12. DECOUPLER DESIGN FOR AN INTERACTING TANKS SYSTEM

    Directory of Open Access Journals (Sweden)

    Duraid F. Ahmed

    2013-05-01

    Full Text Available The mathematical model forthe two interacting tanks system was derived and the dynamic behavior of thissystem was studied by introducing a step change in inlet flow rate. In thispaper, the analysis of the interaction loops between the controlled variable(liquid level and manipulated variable (inlet flow rate was carried out usingthe relative gain array. Also decoupling technique is applied to eliminate theeffect this interaction by design suitable decouplers for the system. Theresults show that the gain of each loop is cut in half when the opposite loopis closed and the gain of other loop changes sign when the opposite loop isclosed. The decoupling method show that the liquid level of tank one isconstant when the second inlet flow changes and to keep the liquid level oftank two constant the first inlet flow must be changed.

  13. 46 CFR 58.60-9 - Industrial systems: Design.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Industrial systems: Design. 58.60-9 Section 58.60-9... MACHINERY AND RELATED SYSTEMS Industrial Systems and Components on Mobile Offshore Drilling Units (MODU) § 58.60-9 Industrial systems: Design. Each system under this subpart must be designed and analyzed in...

  14. Thermal Propulsion Capture System Heat Exchanger Design

    Science.gov (United States)

    Richard, Evan M.

    2016-01-01

    One of the biggest challenges of manned spaceflight beyond low earth orbit and the moon is harmful radiation that astronauts would be exposed to on their long journey to Mars and further destinations. Using nuclear energy has the potential to be a more effective means of propulsion compared to traditional chemical engines (higher specific impulse). An upper stage nuclear engine would allow astronauts to reach their destination faster and more fuel efficiently. Testing these engines poses engineering challenges due to the need to totally capture the engine exhaust. The Thermal Propulsion Capture System is a concept for cost effectively and safely testing Nuclear Thermal Engines. Nominally, hydrogen exhausted from the engine is not radioactive, but is treated as such in case of fuel element failure. The Thermal Propulsion Capture System involves injecting liquid oxygen to convert the hydrogen exhaust into steam. The steam is then cooled and condensed into liquid water to allow for storage. The Thermal Propulsion Capture System concept for ground testing of a nuclear powered engine involves capturing the engine exhaust to be cooled and condensed before being stored. The hydrogen exhaust is injected with liquid oxygen and burned to form steam. That steam must be cooled to saturation temperatures before being condensed into liquid water. A crossflow heat exchanger using water as a working fluid will be designed to accomplish this goal. Design a cross flow heat exchanger for the Thermal Propulsion Capture System testing which: Eliminates the need for water injection cooling, Cools steam from 5800 F to saturation temperature, and Is efficient and minimizes water requirement.

  15. Design of CMS Beam Halo Monitor system

    CERN Document Server

    AUTHOR|(CDS)2078842

    2015-01-01

    A fast and directional monitoring system for the CMS experiment is designed to provide an online, bunch-by-bunch measurement of beam background induced by beam halo interactions, separately for each beam. The background detection is based on Cherenkov radiation produced in synthetic fused silica read out by a fast, UV sensitive photomultiplier tube. Twenty detector units per end will be azimuthally distributed around the rotating shielding of CMS, covering ~408 cm2 at 20.6m from the interaction point, at a radius of ~180 cm. The directional and fast response of the system allows the discrimination of the background particles from the dominant flux in the cavern induced by pp collision debris, produced within the 25 ns bunch spacing. A robust multi-layered shielding will enclose each detector unit to protect the photomultiplier tube from the magnetic field and to eliminate the occupancy from low energy particles. The design of the front-end units is validated by experimental results. An overview of the new sy...

  16. Distributed design approach in persistent identifiers systems

    Science.gov (United States)

    Golodoniuc, Pavel; Car, Nicholas; Klump, Jens

    2017-04-01

    , we propose using Distributed Hash Tables (DHT), Peer Exchange networks (PEX), Magnet Links, and peer-to-peer (P2P) file sharing networks - the technologies that enable applications such as BitTorrent (Wu et al., 2010). The proposed approach introduces reliable information replication and caching mechanisms, eliminating the need for a central PID data store, and increases overall system fault tolerance due to the lack of a single point of failure. The proposed PID system's design aims to ensure trustworthiness of the system and incorporates important aspects of governance, such as the notion of the authoritative source, data integrity, caching, and data replication control.

  17. Analysis and design of networked control systems

    CERN Document Server

    You, Keyou; Xie, Lihua

    2015-01-01

    This monograph focuses on characterizing the stability and performance consequences of inserting limited-capacity communication networks within a control loop. The text shows how integration of the ideas of control and estimation with those of communication and information theory can be used to provide important insights concerning several fundamental problems such as: ·         minimum data rate for stabilization of linear systems over noisy channels; ·         minimum network requirement for stabilization of linear systems over fading channels; and ·         stability of Kalman filtering with intermittent observations. A fundamental link is revealed between the topological entropy of linear dynamical systems and the capacities of communication channels. The design of a logarithmic quantizer for the stabilization of linear systems under various network environments is also extensively discussed and solutions to many problems of Kalman filtering with intermittent observations are de...

  18. Benchmarking image fusion system design parameters

    Science.gov (United States)

    Howell, Christopher L.

    2013-06-01

    A clear and absolute method for discriminating between image fusion algorithm performances is presented. This method can effectively be used to assist in the design and modeling of image fusion systems. Specifically, it is postulated that quantifying human task performance using image fusion should be benchmarked to whether the fusion algorithm, at a minimum, retained the performance benefit achievable by each independent spectral band being fused. The established benchmark would then clearly represent the threshold that a fusion system should surpass to be considered beneficial to a particular task. A genetic algorithm is employed to characterize the fused system parameters using a Matlab® implementation of NVThermIP as the objective function. By setting the problem up as a mixed-integer constraint optimization problem, one can effectively look backwards through the image acquisition process: optimizing fused system parameters by minimizing the difference between modeled task difficulty measure and the benchmark task difficulty measure. The results of an identification perception experiment are presented, where human observers were asked to identify a standard set of military targets, and used to demonstrate the effectiveness of the benchmarking process.

  19. Design of an Antenna Measurement System

    Science.gov (United States)

    Patel, Kyle

    Modern communication systems require next generation antenna, whose performance can only be verified through specialized equipment and methodology. For example, a vector network analyzer can be used to determine metrics such as the impedance bandwidth of an antenna. However, a vector network analyzer provides only a portion of the operational characteristics of an antenna. Instead, controlled environments known as anechoic chambers are used to ascertain the radiation characteristics of an antenna under test. These facilities typically incorporate a variety of different instruments to facilitate the measurement process. Rotary tables, linear actuators, vector network analyzers, and amplifiers are examples of typical components that are used in an anechoic chamber. While one could certainly manually control these components, it is more efficient to automate the measurement procedure. This saves time and increases repeatability of measurements. This thesis presents a complete software design for automated antenna measurement system for use in anechoic chambers. This developed software is both modular and flexible, which allows for easy adaptation for new equipment over time and allows the system to run in a simulation mode if some hardware components are not present. The system has also proven its capability by successfully measuring the radiation pattern of a dipole antenna, even in an anechoic chamber lacking wall-to-wall absorbers.

  20. Engineering Software Suite Validates System Design

    Science.gov (United States)

    2007-01-01

    EDAptive Computing Inc.'s (ECI) EDAstar engineering software tool suite, created to capture and validate system design requirements, was significantly funded by NASA's Ames Research Center through five Small Business Innovation Research (SBIR) contracts. These programs specifically developed Syscape, used to capture executable specifications of multi-disciplinary systems, and VectorGen, used to automatically generate tests to ensure system implementations meet specifications. According to the company, the VectorGen tests considerably reduce the time and effort required to validate implementation of components, thereby ensuring their safe and reliable operation. EDASHIELD, an additional product offering from ECI, can be used to diagnose, predict, and correct errors after a system has been deployed using EDASTAR -created models. Initial commercialization for EDASTAR included application by a large prime contractor in a military setting, and customers include various branches within the U.S. Department of Defense, industry giants like the Lockheed Martin Corporation, Science Applications International Corporation, and Ball Aerospace and Technologies Corporation, as well as NASA's Langley and Glenn Research Centers

  1. Designing an enhanced groundwater sample collection system

    Energy Technology Data Exchange (ETDEWEB)

    Schalla, R.

    1994-10-01

    As part of an ongoing technical support mission to achieve excellence and efficiency in environmental restoration activities at the Laboratory for Energy and Health-Related Research (LEHR), Pacific Northwest Laboratory (PNL) provided guidance on the design and construction of monitoring wells and identified the most suitable type of groundwater sampling pump and accessories for monitoring wells. The goal was to utilize a monitoring well design that would allow for hydrologic testing and reduce turbidity to minimize the impact of sampling. The sampling results of the newly designed monitoring wells were clearly superior to those of the previously installed monitoring wells. The new wells exhibited reduced turbidity, in addition to improved access for instrumentation and hydrologic testing. The variable frequency submersible pump was selected as the best choice for obtaining groundwater samples. The literature references are listed at the end of this report. Despite some initial difficulties, the actual performance of the variable frequency, submersible pump and its accessories was effective in reducing sampling time and labor costs, and its ease of use was preferred over the previously used bladder pumps. The surface seals system, called the Dedicator, proved to be useful accessory to prevent surface contamination while providing easy access for water-level measurements and for connecting the pump. Cost savings resulted from the use of the pre-production pumps (beta units) donated by the manufacturer for the demonstration. However, larger savings resulted from shortened field time due to the ease in using the submersible pumps and the surface seal access system. Proper deployment of the monitoring wells also resulted in cost savings and ensured representative samples.

  2. Hyperemesis Gravidarum | Isaacs | Obstetrics and Gynaecology Forum

    African Journals Online (AJOL)

    Obstetrics and Gynaecology Forum. Journal Home · ABOUT · Advanced Search · Current Issue · Archives · Journal Home > Vol 17, No 4 (2007) >. Log in or Register to get access to full text downloads.

  3. Low-level waste forum meeting reports

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-12-31

    This report provides highlights from the 1992 fall meeting of the Low LEvel Radioactive Waste Forum. Topics included: disposal options after 1992; interregional agreements; management alternatives; policy; and storage.

  4. Low-level waste forum meeting reports

    Energy Technology Data Exchange (ETDEWEB)

    Sternwheeler, W.D.E.

    1992-12-31

    This paper provides highlights from the 1992 winter meeting of the Low Level Radioactive Wastes Forum. Topics of discussion included: legal information; state and compact reports; freedom of information requests; and storage.

  5. Titaanide heitlus: Forum Cinemas vs Cinamon

    Index Scriptorium Estoniae

    2009-01-01

    Cinamon Group avab Solarise keskuses uue Cinamoni kinoketti kuuluva kino, mis konkureerib Coca-Cola Plazaga (võrdlev tabel, allikad: Cinamoni turundusjuht Evelyn Laar ja Forum Cinemas' levijuhi asetäitja Timo Diener)

  6. Competition, Regulation and Development Research Forum ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Institution. CUTS International. Institution Country. United Kingdom. Institution Website. http://www.cuts-london.org. Outputs. Evaluations. External review of project "Competition, Regulation and Development Research Forum (CDRF) : Competition and Regulatory Implementation Issues in Developing Countries" : final report.

  7. Members of the Forum Engelberg visit CERN

    CERN Multimedia

    Patrive Loïez

    2002-01-01

    The Forum Engelberg is an annual interdisciplinary conference held in Engelberg, Switzerland intended to act as an international platform for debate and exchange of views on key issues affecting scientific research, technology, economics and philosophy. Its President is Hubert Curien - former French Minister of Research and Space Research, and President of the CERN Council from 1994 to 1996. Photo 01: CERN Director-General Prof. Luciano Maiani (left) speaks to Forum members and public figures from the Geneva area during the visit. In the background is Jean-Claude Landry from the Department of the Interior, Agriculture and Environment, State of Geneva. Photo 02: CERN Director-General Prof. Luciano Maiani (left) speaks to Forum members and public figures from the Geneva area during the visit. In the background is Bernard Ecoffey, Founder of the Forum Engelberg.

  8. Members of the Forum Engelberg visit CERN

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    The Forum Engelberg is an annual interdisciplinary conference held in Engelberg, Switzerland intended to act as an international platform for debate and exchange of views on key issues affecting scientific research, technology, economics and philosophy. Its President is Hubert Curien - former French Minister of Research and Space Research, and President of the CERN Council from 1994 to 1996. He is seen here (right) in discussion with Bernard Ecoffey, Founder of the Forum Engelberg.

  9. Members of the Forum Engelberg visit CERN

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    The Forum Engelberg is an annual interdisciplinary conference held in Engelberg, Switzerland intended to act as an international platform for debate and exchange of views on key issues affecting scientific research, technology, economics and philosophy. Its President is Hubert Curien - former French Minister of Research and Space Research, and President of the CERN Council from 1994 to 1996. He is pictured here (right) alongside CERN Director-General Prof. Luciano Maiani during the visit of Forum members to CERN.

  10. RETHINKING STAKEHOLDER ENGAGEMENT AND TECHNOLOGY ACCESS IN HEALTH TECHNOLOGY ASSESSMENT: REACTIONS TO POLICY FORUM DISCUSSIONS.

    Science.gov (United States)

    Sampietro-Colom, Laura; Thomas, Sarah

    2016-01-01

    The need to progress and innovate in health technology assessment (HTA) is a must in a continuously changing environment. The HTAi Policy Forum reflected on two specific areas for development where it was thought there was need for careful consideration and deliberation during the main annual meeting in February 2016. The study by Husereau et al. (1) in this journal presents the discussions resulting from this Forum. To further share the deliberations of the Forum and with a view to opening this debate to the wider HTA community, a panel session during the HTAi Annual Meeting in Tokyo was organized. Presentations at the panel included a summary of the HTAi Policy Forum discussions and perspectives from a patient, a representative of healthcare system provider, and a representative from an HTA organization and industry. This letter presents the issues raised in the panel session.

  11. Information processing systems, reasoning modules, and reasoning system design methods

    Energy Technology Data Exchange (ETDEWEB)

    Hohimer, Ryan E.; Greitzer, Frank L.; Hampton, Shawn D.

    2016-08-23

    Information processing systems, reasoning modules, and reasoning system design methods are described. According to one aspect, an information processing system includes working memory comprising a semantic graph which comprises a plurality of abstractions, wherein the abstractions individually include an individual which is defined according to an ontology and a reasoning system comprising a plurality of reasoning modules which are configured to process different abstractions of the semantic graph, wherein a first of the reasoning modules is configured to process a plurality of abstractions which include individuals of a first classification type of the ontology and a second of the reasoning modules is configured to process a plurality of abstractions which include individuals of a second classification type of the ontology, wherein the first and second classification types are different.

  12. Information processing systems, reasoning modules, and reasoning system design methods

    Science.gov (United States)

    Hohimer, Ryan E; Greitzer, Frank L; Hampton, Shawn D

    2014-03-04

    Information processing systems, reasoning modules, and reasoning system design methods are described. According to one aspect, an information processing system includes working memory comprising a semantic graph which comprises a plurality of abstractions, wherein the abstractions individually include an individual which is defined according to an ontology and a reasoning system comprising a plurality of reasoning modules which are configured to process different abstractions of the semantic graph, wherein a first of the reasoning modules is configured to process a plurality of abstractions which include individuals of a first classification type of the ontology and a second of the reasoning modules is configured to process a plurality of abstractions which include individuals of a second classification type of the ontology, wherein the first and second classification types are different.

  13. Information processing systems, reasoning modules, and reasoning system design methods

    Energy Technology Data Exchange (ETDEWEB)

    Hohimer, Ryan E.; Greitzer, Frank L.; Hampton, Shawn D.

    2015-08-18

    Information processing systems, reasoning modules, and reasoning system design methods are described. According to one aspect, an information processing system includes working memory comprising a semantic graph which comprises a plurality of abstractions, wherein the abstractions individually include an individual which is defined according to an ontology and a reasoning system comprising a plurality of reasoning modules which are configured to process different abstractions of the semantic graph, wherein a first of the reasoning modules is configured to process a plurality of abstractions which include individuals of a first classification type of the ontology and a second of the reasoning modules is configured to process a plurality of abstractions which include individuals of a second classification type of the ontology, wherein the first and second classification types are different.

  14. The Virtual Astronomical Observatory Users Forum

    Science.gov (United States)

    Muench, August A.; Emery Bunn, S.; Astronomical Observatory, Virtual

    2013-01-01

    We present the online forum astrobabel.com, which has the goal of being a gathering place for the collective community intelligence about astronomical computing. The audience for this forum is anyone engaged in the analysis of astronomical or planetary data, whether that data be observational or theoretical. It is a free, community driven site where discussions are formulated primarily around the "question and answer" format. Current topics on the forum range from “Is there a photometry package in Python?” to “Where are the support forums for astronomy software packages?” and “Why is my SDSS SkyQuery query missing galaxies?” The poster will detail the full scope of discussions in the forum, and provide some basic guidelines for ensuring high quality forum posts. We will highlight the ways astronomers can discover and participate in discussions. Further, we view this as an excellent opportunity to gather feedback and feature requests from AAS221 attendees. Acknowledgement: The Virtual Astronomical Observatory (VAO) is managed by the VAO, LLC, a non-profit company established as a partnership of the Associated Universities, Inc. and the Association of Universities for Research in Astronomy, Inc. The VAO is sponsored by the National Science Foundation and the National Aeronautics and Space Administration.

  15. System design document for the plutonium stabilization and packaging system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-05-08

    The objective of this system is to stabilize and package plutonium metals and oxides of greater than 50% wt, as well as other selected isotopes, in accordance with the requirements for DOE standards for safe storage of these materials for 50 years. This document describes the highest level design information and user characteristics from an operational perspective. It provides guidance for developing procurement and installation specifications, interface requirements, and test plans.

  16. First Session of the Sant Cugat Forum on Astrophysics

    CERN Document Server

    Rea, Nanda; High-Energy Emission from Pulsars and their Systems

    2011-01-01

    The aim of the inaugural meeting of the Sant Cugat Forum on Astrophysics was to address, in a global context, the current understanding of and challenges in high-energy emissions from isolated and non-isolated neutron stars, and to confront the theoretical picture with observations of both the Fermi satellite and the currently operating ground-based Cherenkov telescopes. Participants have also discussed the prospects for possible observations with planned instruments across the multi-wavelength spectrum (e.g. SKA, LOFAR, E-VLT, IXO, CTA) and how they will impact our theoretical understanding of these systems. In keeping with the goals of the Forum, this book not only represents the proceedings of the meeting, but also a reflection on the state-of-the-art in the topic.

  17. Simulation-based disassembly systems design

    Science.gov (United States)

    Ohlendorf, Martin; Herrmann, Christoph; Hesselbach, Juergen

    2004-02-01

    Recycling of Waste of Electrical and Electronic Equipment (WEEE) is a matter of actual concern, driven by economic, ecological and legislative reasons. Here, disassembly as the first step of the treatment process plays a key role. To achieve sustainable progress in WEEE disassembly, the key is not to limit analysis and planning to merely disassembly processes in a narrow sense, but to consider entire disassembly plants including additional aspects such as internal logistics, storage, sorting etc. as well. In this regard, the paper presents ways of designing, dimensioning, structuring and modeling different disassembly systems. Goal is to achieve efficient and economic disassembly systems that allow recycling processes complying with legal requirements. Moreover, advantages of applying simulation software tools that are widespread and successfully utilized in conventional industry sectors are addressed. They support systematic disassembly planning by means of simulation experiments including consecutive efficiency evaluation. Consequently, anticipatory recycling planning considering various scenarios is enabled and decisions about which types of disassembly systems evidence appropriateness for specific circumstances such as product spectrum, throughput, disassembly depth etc. is supported. Furthermore, integration of simulation based disassembly planning in a holistic concept with configuration of interfaces and data utilization including cost aspects is described.

  18. Multiprocessor systems on chip design space exploration

    CERN Document Server

    Kempf, Torsten; Leupers, Rainer

    2011-01-01

    This comprehensive introduction to the design challenges of MPSoC platforms focuses on early space exploration and defines an iterative methodology to increase the abstraction level, enabling the evaluation of design decisions earlier in the design process.

  19. Design of biomedical devices and systems

    CERN Document Server

    King, Paul H

    2008-01-01

    Introduction to Biomedical Engineering Design. Fundamental Design Tools. Design Team Management, Reporting, and Documentation. Product Definition. Product Documentation. Product Development. Hardware Development Methods and Tools. Software Development Methods and Tools. Human Factors. Industrial Design. Biomaterials and Material Testing. Safety Engineering: Devices and Processes. Testing. Analysis of Test Data. Reliability and Liability. Food and Drug Administration. Regulations and Standards. Licensing, Patents, Copyrights, and Trade Secrets. Manufacturing and Quality Control. Miscellaneous Issues. Product Issues. Professional Issues. Design Case Studies. Future Design Issues.

  20. 46 CFR 153.280 - Piping system design.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping system design. 153.280 Section 153.280 Shipping... BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design and Equipment Piping Systems and Cargo Handling Equipment § 153.280 Piping system design. (a) Each cargo piping system must meet...

  1. Design and installation package for solar hot water system

    Energy Technology Data Exchange (ETDEWEB)

    1978-12-01

    This report contains the design and installation procedure for the Solar Engineering and Manufacturing Company's solar hot water system. Included are the system performance specifications, system design drawings, hazard analysis and other information necessary to evaluate the design and instal the system.

  2. On the Design of High Resolution Imaging Systems

    Science.gov (United States)

    Eckardt, A.; Reulke, R.

    2017-05-01

    The design of high-resolution systems is always a consideration of many parameters. Technological parameter of the imaging system, e.g. diameter of the imaging system, mass and power, as well as storage and data transfer, have an direct impact on spacecraft size and design. The paper describes the essential design parameters for the description of high-resolution systems.

  3. Design space pruning through hybrid analysis in system-level design space exploration

    NARCIS (Netherlands)

    Piscitelli, R.; Pimentel, A.D.

    2012-01-01

    System-level design space exploration (DSE), which is performed early in the design process, is of eminent importance to the design of complex multi-processor embedded system archi- tectures. During system-level DSE, system parameters like, e.g., the number and type of processors, the type and size

  4. Systems design analysis applied to launch vehicle configuration

    Science.gov (United States)

    Ryan, R.; Verderaime, V.

    1993-01-01

    As emphasis shifts from optimum-performance aerospace systems to least lift-cycle costs, systems designs must seek, adapt, and innovate cost improvement techniques in design through operations. The systems design process of concept, definition, and design was assessed for the types and flow of total quality management techniques that may be applicable in a launch vehicle systems design analysis. Techniques discussed are task ordering, quality leverage, concurrent engineering, Pareto's principle, robustness, quality function deployment, criteria, and others. These cost oriented techniques are as applicable to aerospace systems design analysis as to any large commercial system.

  5. Product System Design – to Household Massage Design as An Example

    Directory of Open Access Journals (Sweden)

    Wang Huabin

    2016-01-01

    Full Text Available Explain what is the system design and the applications of System design in the product design process. Using The whole idea and systems design methods to analyze the design of household hand massage,Use a chart image to explain that Household hand massage products in the influence of user and the environment, the influence of large system environment for the product. The use of components of the system to anatomy product design. Each system components has a link between and mutual correlation.

  6. Design of Air Traffic Control Operation System

    Directory of Open Access Journals (Sweden)

    Gabriela STROE

    2017-09-01

    Full Text Available This paper presents a numerical simulation for a different aircraft, based on the specific aircraft data that can be incorporated in the model and the equations of motions which can be consequently solved. The aircraft flight design involves various technical steps and requires the use of sophisticated software having modeling and simulation capabilities. Within the flight simulation model, the aerodynamic model can be regarded as the most complex and most important. With appropriate aerodynamic modeling the aerodynamic forces and moments acting on the aircraft's center of gravity can be numerically solved with accuracy. These forces and moments are further used to solve the equations of motion. The development of control and computing technology makes it possible for advanced flight control strategy. The advanced control techniques tend to make the control design and their implementation much more complicated with more control loops or channels; in this line, the autopilot of modern aircrafts includes a variety of automatic control systems that aid and support the flight navigation, flight management, and perform the enhancing and/or augmenting of the stability characteristics of the airplane. Therefore in this context it is very important to choose the dynamic that will satisfy the performance and robustness specifications.

  7. Adding to the mix: Students use of Facebook groups and blackboard discussion forums in higher education

    Directory of Open Access Journals (Sweden)

    Mike Kent

    2016-09-01

    Full Text Available This paper reports on a case study of the use of Facebook in learning and teaching in higher education. Facebook was used as a venue for online discussion to support the existing Learning Management System (in this case Blackboard in the unit Internet Collaboration and Organisation as part of the Internet Communications degree taught fully online through Open Universities Australia (OUA. Students’ posts to both Facebook and the Blackboard discussion forum were analysed for content, length, and when throughout the study period they were posted. This is significant as much of the previous work in this area has relied on students self-reporting, rather than direct observation of student behaviour. These results were then compared to earlier instances of the same unit that ran within the previous twelve months, one fully online with OUA only using the Blackboard discussion group, and a second taught at Curtin University with both blended learning for students at the University’s Bentley campus as well as fully online for external students, that utilised both Blackboard and Facebook. The results show that Facebook greatly increases the level of student activity in online discussions, both absolutely and in the level of sustained activity across the unit’s study period. Facebook groups also had a different pattern of content from Blackboard. In Blackboard discussion is more focused on the set unit learning content, in Facebook students were using the groups to discuss administration and assignments and also bring in additional material from outside the units set learning materials. Facebook posts, while more sustained over the semester, were shorter in length. This study found that the addition of a Facebook discussion forum does not noticeably impact on the use of Blackboard’s discussion forum, but rather adds a new dimension to the mix of online interaction. The paper concludes that there is value in using both of these forums for student

  8. LHC beam loss monitor system design

    CERN Document Server

    Dehning, Bernd; Friesenbichler, W; Gschwendtner, E; Koopman, J

    2002-01-01

    At the LHC a beam loss system will be installed for continuous surveillance of particle losses. The system is designed to prevent hardware destructions, to avoid magnet coil quenches and to provide quantitative loss values. Over 3000 ionization chambers will be used to initiate the beam abort if the loss rates exceed the quench levels. The time and beam energy dependent quench levels require the acquisition of chamber currents in the range from 50 pA to 0.5 mA and an update of the values every 89 mu s. The acquisition and control electronics will consist of a front end electronics near (< 400 m) to the ionization chambers and a threshold controller in the surface buildings. The front end will include a charge balance converter, a counter and multiplexer part. The charge balance converter is most suitable to cover the large dynamic range. The introduced error is smaller than few % in the required dynamic range. Six channels will be transmitted over one cable of up to 3 km length. The threshold controller wi...

  9. LHC Beam Loss Monitor System Design

    Science.gov (United States)

    Dehning, B.; Ferioli, G.; Friesenbichler, W.; Gschwendtner, E.; Koopman, J.

    2002-12-01

    At the LHC a beam loss system will be installed for continuous surveillance of particle losses. The system is designed to prevent hardware destructions, to avoid magnet coil quenches and to provide quantitative loss values. Over 3000 ionization chambers will be used to initiate the beam abort if the loss rates exceed the quench levels. The time and beam energy dependent quench levels require the acquisition of chamber currents in the range from 50 pA to 0.5 mA and an update of the values every 89 μs. The acquisition and control electronics will consist of a front end electronics near (< 400 m) to the ionization chambers and a threshold controller in the surface buildings. The front end will include a charge balance converter, a counter and multiplexer part. The charge balance converter is most suiteable to cover the large dynamic range. The introduced error is smaller than few % in the required dynamic range. Six channels will be transmitted over one cable of up to 3 km length. The threshold controller will issue warnings and dump signals depending on the beam energy and the loss durations.

  10. AMCP Partnership Forum: Driving Value and Outcomes in Oncology.

    Science.gov (United States)

    2017-05-01

    Innovation in cancer treatment has provided a wealth of recently available therapeutic agents and a healthy drug pipeline that promises to change the way we approach this disease and the lives of those affected in the years to come. However, the majority of these new agents, many of which are targeted to specific genomic features of various tumors, may challenge the health care system's ability to afford cancer care. This innovation drives the need to focus on the value of the treatments provided to patients with cancer and on methods to optimize the efficiency of the dollars we spend, in addition to the clinical value itself. The Academy of Managed Care Pharmacy (AMCP) convened a Partnership Forum to address how to improve value and outcomes in cancer care. In this multistakeholder forum, several areas were addressed: current methods for assessing the value of oncology products, the need for balancing population management with precision medicine, and the outlook for value-based contracting for oncology medications in managed care settings. Participants recommended ways in which stakeholders can work toward solutions in these areas. The forum brought together stakeholders from health plans, integrated delivery systems, pharmacy benefit managers, clinical practice, biopharmaceutical industry, and laboratory companies. Also participating were representatives from trade and professional associations. During this 1.5-day forum, participants identified current challenges, readiness, and ways to address value and improve outcomes in cancer therapy. Some of the challenges identified include choosing a viable (and practical) outcome target for value-based contracting in oncology, the development and use of value frameworks and clinical pathways, managing cancer diagnostics, utilization of alternative payment systems, moving from a large evidence base to a small clinical trial base in considering targeted treatments, and lack of best practices in value-based payment

  11. Highly optimized tolerance: robustness and design in complex systems

    Science.gov (United States)

    Carlson; Doyle

    2000-03-13

    Highly optimized tolerance (HOT) is a mechanism that relates evolving structure to power laws in interconnected systems. HOT systems arise where design and evolution create complex systems sharing common features, including (1) high efficiency, performance, and robustness to designed-for uncertainties, (2) hypersensitivity to design flaws and unanticipated perturbations, (3) nongeneric, specialized, structured configurations, and (4) power laws. We study the impact of incorporating increasing levels of design and find that even small amounts of design lead to HOT states in percolation.

  12. Kilowatt isotope power system phase II plan. Volume II: flight System Conceptual Design (FSCD)

    Energy Technology Data Exchange (ETDEWEB)

    1978-03-01

    The Kilowatt Isotope Power System (KIPS) Flight System Conceptual Design (FSCD) is described. Included are a background, a description of the flight system conceptual design, configuration of components, flight system performance, Ground Demonstration System test results, and advanced development tests.

  13. A New Approach to Design of Dependable Control Systems

    DEFF Research Database (Denmark)

    Blanke, M.; Jørgensen, R.B.; Svavarsson, M.

    1996-01-01

    This paper presents a new method for design of fault handling as a supervisory part of a control system.......This paper presents a new method for design of fault handling as a supervisory part of a control system....

  14. Design of Surface Permanent Magnet Synchronous Motor Using Design Assist System for PMSM

    National Research Council Canada - National Science Library

    Yamano, Kenta; Morimoto, Shigeo; Sanada, Masayuki; Inoue, Yukinori

    2017-01-01

    .... In this study, a design assist system is proposed for PMSMs. This system uses motor parameters and a magnetic equivalent circuit to design a PMSM that satisfies the demanded output characteristics...

  15. Towards system level runtime design space exploration of reconfigurable architectures

    NARCIS (Netherlands)

    Sigdel, K.; Thompson, M.; Pimentel, A.D.; Bertels, K.

    2008-01-01

    The ever increasing intricacy of the systems and the increasing use of reconfigurble heterogeneous devices significantly enlarges the design complexity of the modern embedded systems. As a result, to create a good design, it is essential to perform Design Space Exploration( DSE) at various design

  16. On Architectural Support for Behaviour Refinement in Distributed Systems Design

    NARCIS (Netherlands)

    Quartel, Dick; Ferreira Pires, Luis; van Sinderen, Marten J.

    During the top-down design of distributed systems, abstract designs have to be replaced by more concrete designs, which add details that define how these systems can be implemented using available building blocks. Behaviour refinement is a design operation in which abstract behaviours are replaced

  17. System 80+{trademark} Standard Design: CESSAR design certification. Volume 2: Amendment I

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-21

    This report, entitled Combustion Engineering Standard Safety Analysis Report - Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These documents describe the Combustion Engineering, Inc. System 80+{sup TM} Standard Design. This report, Volume 2, in conjunction with Volume 3, provides the design of structures, components, equipment and systems.

  18. MPACT Fast Neutron Multiplicity System Design Concepts

    Energy Technology Data Exchange (ETDEWEB)

    D. L. Chichester; S. A. Pozzi; J. L. Dolan; M. T. Kinlaw; A. C. Kaplan; M. Flaska; A. Enqvist; J. T. Johnsom; S. M. Watson

    2012-10-01

    This report documents work performed by Idaho National Laboratory and the University of Michigan in fiscal year (FY) 2012 to examine design parameters related to the use of fast-neutron multiplicity counting for assaying plutonium for materials protection, accountancy, and control purposes. This project seeks to develop a new type of neutron-measurement-based plutonium assay instrument suited for assaying advanced fuel cycle materials. Some current-concept advanced fuels contain high concentrations of plutonium; some of these concept fuels also contain other fissionable actinides besides plutonium. Because of these attributes the neutron emission rates of these new fuels may be much higher, and more difficult to interpret, than measurements made of plutonium-only materials. Fast neutron multiplicity analysis is one approach for assaying these advanced nuclear fuels. Studies have been performed to assess the conceptual performance capabilities of a fast-neutron multiplicity counter for assaying plutonium. Comparisons have been made to evaluate the potential improvements and benefits of fast-neutron multiplicity analyses versus traditional thermal-neutron counting systems. Fast-neutron instrumentation, using for example an array of liquid scintillators such as EJ-309, have the potential to either a) significantly reduce assay measurement times versus traditional approaches, for comparable measurement precision values, b) significantly improve assay precision values, for measurement durations comparable to current-generation technology, or c) moderating improve both measurement precision and measurement durations versus current-generation technology. Using the MCNPX-PoliMi Monte Carlo simulation code, studies have been performed to assess the doubles-detection efficiency for a variety of counter layouts of cylindrical liquid scintillator detector cells over one, two, and three rows. Ignoring other considerations, the best detector design is the one with the most

  19. 5th Physics and Society Forum - EPS

    CERN Multimedia

    2012-01-01

    The Fifth Physics and Society Forum, organized by the European Physical Society, will take place at CERN from 28 to 29 March 2012. 
The purpose of the meeting is to explore the challenges experienced by physicists who leave their field of study to pursue alternative careers in the market place outside of teaching and university-based research. 
     It is widely recognized that a knowledgeable society is a prerequisite for growth. Value is only created if knowledge can be transformed into know-how and "know-how-to-do". Today it is widely recognized that a society is unable to grow and sustain an advanced science system unless equally advanced production is present. Today production is off-shored to emerging economies in Asia and elsewhere where labour costs are more favourable. European physicists therefore have the choice of being smarter, working harder and working cheaper or moving into other fields. 

 Registration is open until 1st March 2012. Please ...

  20. FORUM: Eco-Labeling and ISO 14000: An Analysis of US Regulatory Systems and Issues Concerning Adoption of Type II Standards

    Science.gov (United States)

    Lathrop; Centner

    1998-03-01

    / Current private and public regulatory systems may not provide an optimal degree of regulation for labels bearing environmental information, and established institutions may detract from efforts to provide for better environmental management. The advent of ISO 14000 offers new opportunities for making eco-labeling a meaningful tool to encourage environmental stewardship. While new federal legislation offers the best vehicle to introduce these standards into US law, the slow pace of the legislative process may recommend an alternative system. Multinational and civic-minded firms may be expected to employ private programs to nurture benevolent environmental management practices until more definitive governmental institutions can be put in place.KEY WORDS: Eco-labels; Environmental labeling; International standards; ISO 14000

  1. Systems & design thinking: a conceptual framework for their integration

    OpenAIRE

    Pourdehnad, John; Wexler, Erica; Wilson, Dennis

    2012-01-01

    This paper explores the relationship between Systems and Design Thinking. It specifically looks into the role of Design in Systems Thinking and how looking at the world through a systems lens influences Design. Our intention is to show the critical concepts developed in the Systems and Design Thinking fields, their underlying assumptions, and the ways in which they can be integrated as a cohesive conceptual framework. While there are many important distinctions that must be considered to unde...

  2. Activity theory as a challenge to systems design

    DEFF Research Database (Denmark)

    Bødker, Susanne

    1991-01-01

    This paper suggests an improvement of the theoretical foundation of information systems research of the 1990s. This foundation is found in human activity theory. The paper deals with how human activity theory can help systems design change, theoretically and practically. Applying activity theory...... to systems design, certain cornerstones become apparent, on which future systems design practice and research need to build. The paper will discuss these cornerstones, and the implications of the new understanding for design practice and research....

  3. System Topology Optimization - An Approach to System Design of Electro-Hydraulic-Mechanical Systems

    DEFF Research Database (Denmark)

    Andersen, T. O.; Hansen, M. R.; Conrad, Finn

    2003-01-01

    The current paper presents an approach to system design of combined electro-hydraulic-mechanical systems. The approach is based on the concurrent handling of the topology as well as the design parameters of the mechanical, hydraulic and controller sub- systems, respectively. Based on an initial d...

  4. Object oriented simulation implementation in support of robust system design

    Energy Technology Data Exchange (ETDEWEB)

    1993-04-01

    A very brief description of two ``classes`` developed for use in design optimization and sensitivity analyses are given. These classes are used in simulations of systems in early design phases as well as system response assessments. The instanciated classes were coupled to system models to demonstrate the practically and efficiency of using these objects in complex robust design processes.

  5. Parametric urban design : An interactive sketching system for shaping neighborhoods

    NARCIS (Netherlands)

    Beirao, J.N.; Nourian Ghadi Kolaee, P.; Mashhoodi, B.

    2011-01-01

    In this paper we show the structure of an urban design parametric system. The system is dynamic and builds an interactive relation with the designer updating the layout and related data at each input change. The responsiveness of the system allows the designer to gain awareness on the qualitative

  6. Information Hiding based Trusted Computing System Design

    Science.gov (United States)

    2014-07-18

    Seeing’ ENF: Power Signature Based Timestamp for Digital Multimedia via Optical Sensing and Signal Processing,” IEEE Trans. on Info. Forensics and...Design Automation Conference, pp. 1-4, June 2007. [23] S. Trimberger. “Trusted Design in FPGAs ”, ACM/ IEEE Design Automation Conference, pp. 5-8...random [8-10]. Meanwhile, we propose to use PUF for the protection of FPGA design intellectual properties [11,12]. Electrical network frequency (ENF

  7. An Emerging Approach to Systems Design

    DEFF Research Database (Denmark)

    Kensing, Finn; Bødker, Keld; Simonsen, Jesper

    The paper presents our first attempt to formulate a design approach based upon our experiences from nine design projects in various organizations. In the projects we have experimented with techniques for analyzing the needs of the organization in question and for supporting the design process. Th...

  8. Evolution: The Computer Systems Engineer Designing Minds

    Directory of Open Access Journals (Sweden)

    Aaron Sloman

    2011-10-01

    Full Text Available What we have learnt in the last six or seven decades about virtual machinery, as a result of a great deal of science and technology, enables us to offer Darwin a new defence against critics who argued that only physical form, not mental capabilities and consciousness could be products of evolution by natural selection. The defence compares the mental phenomena mentioned by Darwin’s opponents with contents of virtual machinery in computing systems. Objects, states, events, and processes in virtual machinery which we have only recently learnt how to design and build, and could not even have been thought about in Darwin’s time, can interact with the physical machinery in which they are implemented, without being identical with their physical implementation, nor mere aggregates of physical structures and processes. The existence of various kinds of virtual machinery (including both “platform” virtual machines that can host other virtual machines, e.g. operating systems, and “application” virtual machines, e.g. spelling checkers, and computer games depends on complex webs of causal connections involving hardware and software structures, events and processes, where the specification of such causal webs requires concepts that cannot be defined in terms of concepts of the physical sciences. That indefinability, plus the possibility of various kinds of self-monitoring within virtual machinery, seems to explain some of the allegedly mysterious and irreducible features of consciousness that motivated Darwin’s critics and also more recent philosophers criticising AI. There are consequences for philosophy, psychology, neuroscience and robotics.

  9. EXADS - EXPERT SYSTEM FOR AUTOMATED DESIGN SYNTHESIS

    Science.gov (United States)

    Rogers, J. L.

    1994-01-01

    The expert system called EXADS was developed to aid users of the Automated Design Synthesis (ADS) general purpose optimization program. Because of the general purpose nature of ADS, it is difficult for a nonexpert to select the best choice of strategy, optimizer, and one-dimensional search options from the one hundred or so combinations that are available. EXADS aids engineers in determining the best combination based on their knowledge of the problem and the expert knowledge previously stored by experts who developed ADS. EXADS is a customized application of the AESOP artificial intelligence program (the general version of AESOP is available separately from COSMIC. The ADS program is also available from COSMIC.) The expert system consists of two main components. The knowledge base contains about 200 rules and is divided into three categories: constrained, unconstrained, and constrained treated as unconstrained. The EXADS inference engine is rule-based and makes decisions about a particular situation using hypotheses (potential solutions), rules, and answers to questions drawn from the rule base. EXADS is backward-chaining, that is, it works from hypothesis to facts. The rule base was compiled from sources such as literature searches, ADS documentation, and engineer surveys. EXADS will accept answers such as yes, no, maybe, likely, and don't know, or a certainty factor ranging from 0 to 10. When any hypothesis reaches a confidence level of 90% or more, it is deemed as the best choice and displayed to the user. If no hypothesis is confirmed, the user can examine explanations of why the hypotheses failed to reach the 90% level. The IBM PC version of EXADS is written in IQ-LISP for execution under DOS 2.0 or higher with a central memory requirement of approximately 512K of 8 bit bytes. This program was developed in 1986.

  10. Design review report for the SY-101 RAPID mitigation system

    Energy Technology Data Exchange (ETDEWEB)

    SCHLOSSER, R.L.

    1999-05-24

    This report documents design reviews conducted of the SY-101 Respond And Pump In Days (RAPID) Mitigation System. As part of the SY-101 Surface-Level-Rise Remediation Project, the SY-101 WID Mitigation System will reduce the potential unacceptable consequences of crust growth in Tank 241-SY-101 (SY-101). Projections of the crust growth rate indicate that the waste level in the tank may reach the juncture of the primary and secondary confinement structures of the tank late in 1999. Because of this time constraint, many design activities are being conducted in parallel and design reviews were conducted for system adequacy as well as design implementation throughout the process. Design implementation, as used in this design review report, is the final component selection (e.g., which circuit breaker, valve, or thermocouple) that meets the approved design requirements, system design, and design and procurement specifications. Design implementation includes the necessary analysis, testing, verification, and qualification to demonstrate compliance with the system design and design requirements. Design implementation is outside the scope of this design review. The design activities performed prior to detailed design implementation (i.e., system mission requirements, functional design requirements, technical criteria, system conceptual design, and where design and build contracts were placed, the procurement specification) have been reviewed and are within the scope of this design review report. Detailed design implementation will be controlled, reviewed, and where appropriate, approved in accordance with Tank Waste Remediation System (TWRS) engineering procedures. Review of detailed design implementation will continue until all components necessary to perform the transfer function are installed and tested.

  11. SMART AERONAUTICAL CHART MANAGEMENT SYSTEM DESIGN

    Directory of Open Access Journals (Sweden)

    M. E. Pakdil

    2015-10-01

    Full Text Available Civil aviation is developing rapidly, and the number of domestic and international operations is increasing exponentially every year than the previous one. Airline companies with increased air traffic and the number of passengers increase the demand of new aircrafts. An aircraft needs not only fuel but also pilot and aeronautical information (charts, digital navigation information, flight plan, and etc. to perform flight operation. One of the most important components in aeronautical information is the terminal chart. Authorized institution in every state is responsible to publish their terminal charts for certain periods. Although these charts are produced in accordance with ICAO’s Annex 4 and Annex 15, cartographic representation and page layout differs in each state’s publication. This situation makes difficult to read them by pilots. In this paper, standard instrument departure (SID charts are analysed to produce by use of cutting-edge and competitive technologies instead of classical computer-aided drawing and vector based graphic applications that are currently used by main chart producers. The goal is to design efficient and commercial chart management system that is able to produce aeronautical charts with same cartographic representation for all states.

  12. Cold Vacuum Drying facility HVAC system design description

    Energy Technology Data Exchange (ETDEWEB)

    SINGH, G.

    2000-09-22

    This System Design Description (SDD) addresses the HVAC system for the CVDF. The CVDF HVAC system consists of five subsystems: (1) Administration building HVAC system; (2) Process bay recirculation HVAC system; (3) Process bay local exhaust HVAC and process vent system; (4) Process general supply/exhaust HVAC system; and (5) Reference air system. The HVAC and reference air systems interface with the following systems: the fire protection control system, Monitoring and Control System (MCS), electrical power distribution system (including standby power), compressed air system, Chilled Water (CHW) system, drainage system, and other Cold Vacuum Drying (CVD) control systems not addressed in this SDD.

  13. Automatic control system generation for robot design validation

    Science.gov (United States)

    Bacon, James A. (Inventor); English, James D. (Inventor)

    2012-01-01

    The specification and drawings present a new method, system and software product for and apparatus for generating a robotic validation system for a robot design. The robotic validation system for the robot design of a robotic system is automatically generated by converting a robot design into a generic robotic description using a predetermined format, then generating a control system from the generic robotic description and finally updating robot design parameters of the robotic system with an analysis tool using both the generic robot description and the control system.

  14. Configuration Design of Product Service System for CNC Machine Tools

    OpenAIRE

    Zhongqi Sheng; Tao Xu; Junyou Song

    2015-01-01

    Product service system is a combination of product and services to meet the customer requirements. Configuration design is the key process of product service system development. This paper studies the configuration design of product service system for CNC machine tools. The research explores the configuration design process of product service system development, analyzes the retrieval method of product service system schemes, determines the configuration sequence of product modules and servic...

  15. Management system aided design: healthcare R&D center application

    OpenAIRE

    Schindler, Aude; Bocquet, Jean-Claude; Dudezert, Aurélie

    2007-01-01

    International audience; The very changing economic environment imposes on the organizations to be flexible. New design methods have to be carried out to create such agile organizations. The systemic approach can be used to contribute to the design of systems such as organizational or decision systems. This paper presents a method based on systemics and an exploratory study case relative to the design of a healthcare research center called MIRCen, especially its decision system. Organizational...

  16. Digital design (Verilog) an embedded systems approach using Verilog

    CERN Document Server

    Ashenden, Peter J

    2007-01-01

    Digital Design: An Embedded Systems Approach Using Verilog provides a foundation in digital design for students in computer engineering, electrical engineering and computer science courses. It takes an up-to-date and modern approach of presenting digital logic design as an activity in a larger systems design context. Rather than focus on aspects of digital design that have little relevance in a realistic design context, this book concentrates on modern and evolving knowledge and design skills. Hardware description language (HDL)-based design and verification is emphasized--Veril

  17. Digital design (VHDL) an embedded systems approach using VHDL

    CERN Document Server

    Ashenden, Peter J

    2007-01-01

    Digital Design: An Embedded Systems Approach Using VHDL provides a foundation in digital design for students in computer engineering, electrical engineering and computer science courses. It takes an up-to-date and modern approach of presenting digital logic design as an activity in a larger systems design context. Rather than focus on aspects of digital design that have little relevance in a realistic design context, this book concentrates on modern and evolving knowledge and design skills. Hardware description language (HDL)-based design and verification is emphasized--VHDL exa

  18. Total energy control system autopilot design with constrained parameter optimization

    Science.gov (United States)

    Ly, Uy-Loi; Voth, Christopher

    1990-01-01

    A description is given of the application of a multivariable control design method (SANDY) based on constrained parameter optimization to the design of a multiloop aircraft flight control system. Specifically, the design method is applied to the direct synthesis of a multiloop AFCS inner-loop feedback control system based on total energy control system (TECS) principles. The design procedure offers a structured approach for the determination of a set of stabilizing controller design gains that meet design specifications in closed-loop stability, command tracking performance, disturbance rejection, and limits on control activities. The approach can be extended to a broader class of multiloop flight control systems. Direct tradeoffs between many real design goals are rendered systematic by proper formulation of the design objectives and constraints. Satisfactory designs are usually obtained in few iterations. Performance characteristics of the optimized TECS design have been improved, particularly in the areas of closed-loop damping and control activity in the presence of turbulence.

  19. FIAP Forum on Entrepreneurship in Physics

    Science.gov (United States)

    2015-03-01

    With the changes in science as globalization has taken root, the future role of physicists becoming a part of the industrial physics community is more imperative. When 80% of graduating physicists will not be employed in academic positions, and 50% of all jobs for these physicists will be industrial sector, the importance of bringing our next generation of scientists up to speed on industrial applications is becoming much more important with the rapid, world-wide development of technology. FIAP is initiating a forum on entrepreneurship as a major role for the next generation of scientists. As physicists are problem solvers and the entrepreneurial experience is all about problem solving: whether involving technology, building a team, or financing a business. This forum seeks to link successful entrepreneurial physicists with the upcoming generation, through the dissemination of their global expertise and experience. The forum will consist of a panel discussion and then be open to question and answers from the audience.

  20. The 8th Japan Bioanalysis Forum symposium.

    Science.gov (United States)

    Matsumaru, Takehisa

    2017-11-01

    The 8th Japan Bioanalysis Forum symposium, the Tower Hall Funabori, Tokyo, Japan, 8-9 February 2017 The 8th Japan Bioanalysis Forum (JBF) symposium was successfully held between 8 and 9 February 2017 at the Tower Hall Funabori, Tokyo, Japan. In total, 24 speakers from Japan, USA and Europe gave presentations regarding the immunogenicity of biopharmaceuticals, ICH S3A Q&A microsampling, ICH M10 bioanalytical method validation, large molecule analysis through LC-MS, auditing activities for bioanalysis and biomarker bioanalysis. Achievements regarding eight diverse themes were also shared by Japan Bioanalysis Forum discussion groups. Over 300 scientists from regulatory agencies, industry and academia actively took part in discussions during the symposium. This article provides the highlights of all the topics discussed in this symposium.