FPGA-based upgrade of the read-out electronics for the low energy polarimeter at COSY/Juelich

Energy Technology Data Exchange (ETDEWEB)

Hempelmann, Nils [Institut fuer Kernphysik, Forschungszentrum Juelich (Germany); Collaboration: JEDI-Collaboration

2016-07-01

The Cooler Synchrotron (COSY) is a facility for cooled polarized beams at the Forschungszentrum in Juelich. The Low Energy Polarimeter (LEP) is the polarimeter in the injection beam line of COSY. The beam polarization is measured using scattering off carbon and polyethylene (CH2) targets. The outgoing particles are detected using twelve plastic scintillators installed in groups of three to the left, to the right, above, and below the beam. The LEP is the routine tool for beam set-up, but its performance was limited by the old read-out electronics consisting of analog NIM modules. A new system using analog pulse sampling and an FPGA chip for signal processing was installed and tested. The ejectile particles were identified by relative time of flight measurement using a signal from the RF amplifier of the cyclotron used for acceleration as a reference. The new system is able to measure the time at which a particle arrives to an accuracy in the order of 50 ps. The presentation includes a review of available systems and a report about measurements in May and December 2015.

Die Energiewerke Nord GmbH. From operator of a decommissioned Russian nuclear power plant to one of Europe's leading decommissioning companies

International Nuclear Information System (INIS)

Philipp, Marlies

2011-01-01

EWN GmbH is a state-owned company with these duties: - decommissioning and demolition of the Greifswald and Rheinsberg nuclear power stations; - safe operation of the Zwischenlager Nord interim store; - development of the 'Lubminer Heide' industrial and commercial estate. Other projects for which EWN GmbH uses its know-how: - disposal of 120 decommissioned Russian nuclear submarines in Murmansk; - decommissioning and dismantling of the Juelich, NRW, AVR experimental reactor; - demolition of nuclear plants; running the Central Decontamination Operations Department at Karlsruhe, BW. Since 2008, EWN GmbH has held 25% of the shares of Deutsche Gesellschaft zum Bau- und Betrieb von Endlagern fuer Abfallstoffe mbH (DBE), a firm building and operating nuclear repositories. (orig.)

Conceptual design of a cold methane moderator system for the European Spallation Source (ESS)

International Nuclear Information System (INIS)

Barnert-Wiemer, H.

2002-02-01

As part of the work for the target station of the planned European spallation source (ESS) the Central Department of Technology at the Forschungszentrum Juelich GmbH is also concerned with the moderators, particular attention being given to the development of cold methane moderators. This report discusses the technical feasibility of solid methane moderators. Methods to tailor the neutron output by adding absorption materials (decouplers or poisons) are not considered here, neither are composite moderators. Based on the given target-moderator-reflector assembly of the ESS project a concept for the ESS cold methane moderators has been developed and is being examined at the Forschungszentrum Juelich. According to this moderator concept the moderator is a fixed bed of small spheres, which makes moderator container filling homogeneous and reproducible. Since spheres form a defined packed bed, cooling of the moderator bed by H 2 is reliable. The process of filling the moderator container and of removing the pellets is batchwise to ensure complete removal of the pellets, so that no spent methane pellets accumulate in the system. For removal of the moderator spheres the fixed bed in the moderator container is fluidized with subsequent hydraulic transport of the pellets. The spent methane pellets are separated from the transport fluid and the methane is released over the stack or purified and reused. Depending on the kind and amount of the radioactive isotopes present these may have to be separated and stored. (orig.)

CFD simulation of hydrogen mixing and mitigation by means of passive auto-catalytic recombiners

International Nuclear Information System (INIS)

Kelm, S.; Reinecke, E-A.; Jahn, W.; Allelein, H-J.

2011-01-01

Modeling of passive auto-catalytic recombiners (PARs) operation in containment geometries involves a large variety of scales; thus, a CFD calculation resolving all these scales would be much too expensive. Therefore, the mechanistic PAR model REKO-DIREKT, developed at Forschungszentrum Juelich, has been coupled with the commercial CFD code ANSYS CFX in order to simulate PAR operation as well as the induced flow and transport phenomena. Based on a short introduction of REKO-DIREKT, its interface to CFX and the explicit coupling scheme is discussed. The paper is finalized by a first demonstration of simulation capabilities on the basis of the ThAI PAR-4 experiment (Becker Technologies GmbH, Eschborn, Germany). (author)

Nuclear Legislation in OECD and NEA Countries. Regulatory and Institutional Framework for Nuclear Activities - Germany

International Nuclear Information System (INIS)

2011-01-01

Committee - KTA); 3. Public and semi-public agencies (Technological Surveillance Association - Technische Ueberwachungsvereine-TUV; Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS)mbH; Karlsruhe Research Centre - Forschungszentrum Karlsruhe; Juelich Research Centre - Forschungszentrum Juelich GmbH; GKSS Research Centre Geesthacht - Forschungszentrum Geesthacht GmbH; Helmholtz Zentrum Berlin for Materials and Energy; The Electron-Synchrotron in Hamburg - Deutsches Elektronen-Synchrotron-DESY; Max-Planck Institute for Plasma Physics at Garching/Munich - Max-Planck-Institut fuer Plasmaphysik-IPP; Company for Heavy Ion Research - Gesellschaft fuer Schwerionenforschung mbH-GSI; Rossendorf Association for Nuclear Technology and Analysis - Verein fuer Kernverfahrenstechnik und Anlaytik)

Forschungszentrum Rossendorf. Institute of Safety Research. Annual report 1998

International Nuclear Information System (INIS)

Weiss, F.P.; Rindelhardt, U.

1999-07-01

The Institute of Safety Research is one of the five scientific institutes of Forschungszentrum Rossendorf e.V. The Forschungszentrum Rossendorf is a member of the 'Wissenschaftsgemeinschaft Gottfried Wilhelm Leibniz' und is funded by the Federal Ministry of Education and Research and by the Saxon Ministry of Science and Arts with 50% each. The research work of the institute aims at the assessment and increase of the safety and environmental sustainability of technical plants. The emphasis is put on the development and validation of mathematical and physical models for process and plant analysis, and of techniques for process and components monitoring. Subject of investigations are equally nuclear plants and installations of process industries. (orig.)

Forschungszentrum Juelich, Institut fuer Kernphysik. Annual report 1993

International Nuclear Information System (INIS)

Baur, G.; Filges, D.; Kilian, K.; Maier, R.; Rossen, P. v.; Schult, O.; Seyfarth, H.; Speth, J.; Turek, P.

1994-02-01

The annual report contains extended abstracts about the work performed in the named research center in 1993 together with a list of talks and publications. The work concerns experimental and theoretical studies on medium and high energy physics, nuclear spectroscopy, nuclear structure and reaction mechanisms, developments of the cooler synchrotron COSY, isochronous cyclotron and ion sources, the magnetic spectrometer BIG KARL, as well as technical developments on data acquisition and processing, electronics, detector and targets, and ESS. (DG)

Twenty-fifth anniversary of the Juelich Nuclear Research Center

International Nuclear Information System (INIS)

Haefele, W.

1982-01-01

On December 10, 1981, KFA Juelich celebrated its 25th year of existence; on December 11, 1956, the land parliament of North Rhine Westphalia had decided in favour of the erection of a joint nuclear research facility of the land of North Rhine Westphalia. In contrast to other nuclear research centers, the Juelich centre was to develop and operate large-scale research equipment and infrastructure for joint use by the universities of the land. This cooperation has remained an important characteristic in spite of the independent scientific work of KFA institutes, Federal government majorities, and changes in research fields and tasks. KFA does fundamental research in nuclear and plasma physics, solid state research, medicine, life sciences, and environmental research; other activities are R + D tasks for the HTR reactor and its specific applications as well as energy research in general. (orig.) [de

BMFT. Partial programme ocean research. Annual report 1991

International Nuclear Information System (INIS)

1992-01-01

The project sponsors 'Biology, energy, ecology' and 'Materials and raw materials research' at Forschungszentrum Juelich GmbH were charged by the Federal Ministry for Research and Technology with the supervision of the promotion of the 'Marine research' subprogram. A summary is given of marine research programs promoted in 1991. These programs covered marine pollution analysis and monitoring (research and development), marine biology (research into marine ecosystems), marine research equipment and methods, maritime meteorology (research into maritime climates), new and unconventional marine nutrition sources (aquaculture), investigation of biological and technological aspects relevant to fishery, international cooperation and marine geosciences. A general survey is given of the promoted projects, and the individual activities are briefly described on standardized data sheets. The appendix gives project and joint-project indices and a list of firms and companies. (orig./BBR) [de

Ozone profiles at Juelich, FRG, during 1988 and 1989

International Nuclear Information System (INIS)

Smit, H.G.J.; Straeter, W.; Loup, H.; Kley, D.

1989-12-01

Ozone soundings were performed regular at Juelich, FRG (50deg 41' N, 6deg 24' E). This report, the first one of an intended series, contains information on technical aspects and presents vertical profiles obtained during 1988 and 1989. (orig.) [de

The legacy of the experimental hadron physics programme at COSY

Energy Technology Data Exchange (ETDEWEB)

Wilkin, C. [UCL, Physics and Astronomy Department, London (United Kingdom)

2017-06-15

The experimental hadronic physics programme at the COoler SYnchrotron of the Forschungszentrum Juelich terminated at the end of 2014. After describing the accelerator and the associated facilities, a review is presented of the major achievements in the field realized over the twenty years of intense research activity. (orig.)

Juelich Research Center. Annual report 1991

International Nuclear Information System (INIS)

1991-10-01

The Research Centre Juelich (KFA) as one of the thirteen national research centres in the Federal Republic of Germany is probably unique in that it concentrates equally on four essentials for mankind - energy, health and environment, materials and matter as well as information. These basic requirements are reflected by the four priority programmes characterizing research at the KFA in the nineties. The research priorities are: Properties of Matter and Material Research; Basic Research on Information Technology; Health, Environment, Biotechnology; Energy Research and Technology; Nuclear Fusion; Basic Nuclear Research; Interdisciplinary Analyses and Methods. (orig./HSCH) [de

Forschungszentrum Juelich, Institut fuer Kernphysik/COSY. Annual report 2009

International Nuclear Information System (INIS)

Buescher, Markus; Hanhart, Christoph; Krewald, Siegfried; Machner, Hartmut; Maier, Rudolf; Meissner, Ulf G.; Ritman, James; Stockhorst, Hans; Stroeher, Hans

2010-05-01

The following topics were dealt with: Physics at COSY, COSY operation and developments, further experimental activities, theoretical investigations, preparation of the HESR, the PANDA experiment. (HSI)

Forschungszentrum Juelich, Institut fuer Kernphysik/COSY. Annual report 2009

Energy Technology Data Exchange (ETDEWEB)

Buescher, Markus; Hanhart, Christoph; Krewald, Siegfried; Machner, Hartmut; Maier, Rudolf; Meissner, Ulf G.; Ritman, James; Stockhorst, Hans; Stroeher, Hans (eds.)

2010-05-15

The following topics were dealt with: Physics at COSY, COSY operation and developments, further experimental activities, theoretical investigations, preparation of the HESR, the PANDA experiment. (HSI)

Forschungszentrum Juelich, Institut fuer Kernphysik/COSY. Annual report 2007

Energy Technology Data Exchange (ETDEWEB)

Buescher, M.; Hanhart, C.; Krewald, S.; Machner, H.; Maier, R.; Meissner, U.G.; Ritman, J.; Stockhorst, H.; Stroeher, H. (eds.)

2008-03-15

The following topics are dealt with, Physics at COSY, external experiments, theoretical investigations. COSY operation and developments, preparation for FAIR. See hints under the relevant topics. (HSI)

Forschungszentrum Juelich, Institut fuer Kernphysik/COSY. Annual report 2010

Energy Technology Data Exchange (ETDEWEB)

Buescher, Markus; Grzonka, Dieter; Hanhart, Christoph; Krewald, Siegfried; Maier, Rudolf; Meissner, Ulf G.; Ritman, James; Stockhorst, Hans; Stroeher, Hans (eds.)

2011-04-15

The following topics are dealt with: Physics at COSY, COSY operation and developments, further experimental activities, theoretical investigations, preparation of the HESR, the PANDA experiments. (HSI)

Forschungszentrum Juelich, Institut fuer Kernphysik/COSY. Annual report 2010

International Nuclear Information System (INIS)

Buescher, Markus; Grzonka, Dieter; Hanhart, Christoph; Krewald, Siegfried; Maier, Rudolf; Meissner, Ulf G.; Ritman, James; Stockhorst, Hans; Stroeher, Hans

2011-04-01

The following topics are dealt with: Physics at COSY, COSY operation and developments, further experimental activities, theoretical investigations, preparation of the HESR, the PANDA experiments. (HSI)

The Hot Cell Radioactive Waste Concept of Forschungszentrum Juelich

International Nuclear Information System (INIS)

Pott, G.; Halaszovich, St.

1999-01-01

During the last 30 years extensive scientific examinations on radioactive metals,ceramics and fuel elements have been carried out, so that a high volume of waste has resulted. Also from the dismantling of irradiated facilities metallics waste has o be handed. Prior for equipment repair the hot cell involved has to be decontaminated and a large amount of lower active waste is produced. The waste is collected for conditioning and storing. There are different categories as: low active liquid waste, low active burnable waste, fuel waste, low and high active metallic waste. For each waste category special transport container are used. For the volume reduction our Waste Department is equipped with special facilities e.g.: furnace for burning, drying, liquids evaporators, hydraulic press for pelletizing, decontamination box for the dismantling ad cleaning of components. After conditioning the waste will be stored on site or transported to final storage in a salt mine (ERAM) . Special documentation has to be done for the acceptance of this waste

Forschungszentrum Juelich, Institut fuer Kernphysik/COSY. Annual report 2007

International Nuclear Information System (INIS)

Buescher, M.; Hanhart, C.; Krewald, S.; Machner, H.; Maier, R.; Meissner, U.G.; Ritman, J.; Stockhorst, H.; Stroeher, H.

2008-03-01

The following topics are dealt with, Physics at COSY, external experiments, theoretical investigations. COSY operation and developments, preparation for FAIR. See hints under the relevant topics. (HSI)

InfiniBand-Experiences at the Forschungszentrum Karlsruhe

International Nuclear Information System (INIS)

Schwickerath, Ulrich; Heiss, Andreas

2006-01-01

The Institute for Scientific Computing (IWR) at the Forschungszentrum Karlsruhe has been evaluating the InfiniBand [InfiniBand Trade Association, InfiniBand Architecture Specification, Release 1.0, October 24, 2000] technology since end of the year 2002. The performance of the interconnect has been tested on different platforms and architectures using MPI. Sequential file transfer performance was measured with the RFIO protocol running on native InfiniBand [Ulrich Schwickerath, Andreas Heiss, Nucl. Instr. and Meth. A 534 (2004) 130, http://www.fzk.de/infiniband], and a newly developed InfiniBand-enabled version of the XROOTD

German neutron scattering conference. Programme and abstracts

Energy Technology Data Exchange (ETDEWEB)

Brueckel, Thomas (ed.)

2012-07-01

The German Neutron Scattering Conference 2012 - Deutsche Neutronenstreutagung DN 2012 offers a forum for the presentation and critical discussion of recent results obtained with neutron scattering and complementary techniques. The meeting is organized on behalf of the German Committee for Research with Neutrons - Komitee Forschung mit Neutronen KFN - by the Juelich Centre for Neutron Science JCNS of Forschungszentrum Juelich GmbH. In between the large European and international neutron scattering conferences ECNS (2011 in Prague) and ICNS (2013 in Edinburgh), it offers the vibrant German and international neutron community an opportunity to debate topical issues in a stimulating atmosphere. Originating from ''BMBF Verbundtreffen'' - meetings for projects funded by the German Federal Ministry of Education and Research - this conference series has a strong tradition of providing a forum for the discussion of collaborative research projects and future developments in the field of research with neutrons in general. Neutron scattering, by its very nature, is used as a powerful probe in many different disciplines and areas, from particle and condensed matter physics through to chemistry, biology, materials sciences, engineering sciences, right up to geology and cultural heritage; the German Neutron Scattering Conference thus provides a unique chance for exploring interdisciplinary research opportunities. It also serves as a showcase for recent method and instrument developments and to inform users of new advances at neutron facilities.

German neutron scattering conference. Programme and abstracts

International Nuclear Information System (INIS)

Brueckel, Thomas

2012-01-01

The German Neutron Scattering Conference 2012 - Deutsche Neutronenstreutagung DN 2012 offers a forum for the presentation and critical discussion of recent results obtained with neutron scattering and complementary techniques. The meeting is organized on behalf of the German Committee for Research with Neutrons - Komitee Forschung mit Neutronen KFN - by the Juelich Centre for Neutron Science JCNS of Forschungszentrum Juelich GmbH. In between the large European and international neutron scattering conferences ECNS (2011 in Prague) and ICNS (2013 in Edinburgh), it offers the vibrant German and international neutron community an opportunity to debate topical issues in a stimulating atmosphere. Originating from ''BMBF Verbundtreffen'' - meetings for projects funded by the German Federal Ministry of Education and Research - this conference series has a strong tradition of providing a forum for the discussion of collaborative research projects and future developments in the field of research with neutrons in general. Neutron scattering, by its very nature, is used as a powerful probe in many different disciplines and areas, from particle and condensed matter physics through to chemistry, biology, materials sciences, engineering sciences, right up to geology and cultural heritage; the German Neutron Scattering Conference thus provides a unique chance for exploring interdisciplinary research opportunities. It also serves as a showcase for recent method and instrument developments and to inform users of new advances at neutron facilities.

Hydrogen from methanol for fuel cells in mobile systems: development of a compact reformer

Energy Technology Data Exchange (ETDEWEB)

Hoehlein, B [Forschungszentrum Juelich GmbH (Germany); Boe, M [H. Topsoee A/S, Lyngby (Denmark); Boegild-Hansen, J [H. Topsoee A/S, Lyngby (Denmark); Broeckerhoff, P [Forschungszentrum Juelich GmbH (Germany); Colsman, G [Forschungszentrum Juelich GmbH (Germany); Emonts, B [Forschungszentrum Juelich GmbH (Germany); Menzer, R [Forschungszentrum Juelich GmbH (Germany); Riedel, E

1996-07-01

On-board generation of hydrogen from methanol with a reformer in connection with the use of a proton-exchange membrane fuel cell (PEMFC) is an attractive option for a passenger car drive. Special considerations are required to obtain low weight and volume. Furthermore, the PEMFC of today cannot tolerate more than 10 ppm of carbon monoxide in the fuel. Therefore a gas conditioning step is needed after the methanol reformer. Our main research activities focus on the conceptual design of a drive system for a passenger car with methanol reformer and PEMFC: Engineering studies with regard to different aspects of this design including reformer, catalytic burner, gas conditioning, balances of the fuel cycles and basic design of a compact methanol reformer. The work described here was carried out within the framework of a JOULE II project of the European Union (1993-1995). Extensive experimental studies have been carried out at the Forschungszentrum Juelich GmbH (KFA) in Germany and at Haldor Topsoee A/S in Denmark. (orig.)

Forschungszentrum Rossendorf. Institute of Safety Research. Report. January 1998 - June 1999

Energy Technology Data Exchange (ETDEWEB)

Weiss, F P; Rindelhardt, U [eds.

1999-09-01

The Institute of Safety Research is one of the five scientific institutes of Forschungszentrum Rossendorf e.V. The Forschungszentrum Rossendorf is a member of the 'Wissenschaftsgemeinschaft Gottfried Wilhelm Leibniz' and is funded by the Federal Ministry of Education and Research and by the Saxon Ministry of Science and Arts with 50% each. The research work of the institute aims at the assessment and increase of the safety and environmental sustainability of technical plants. The emphasis is put on the development and validation of mathematical and physical models for process and plant analysis, and of techniques for process and components monitoring. Subject of investigations are equally nuclear plants and installations of process industries. To analyse the thermo-fluiddynamics of normal plant operation and of the behaviour during accidents, physical models and computer codes are developed for multi-phase and multi-component flows, and for the space and time dependent heat release (neutron kinetics, chemical kinetics). (orig.)

Forschungszentrum Rossendorf. Institute of Safety Research. Report. January 1998 - June 1999

Energy Technology Data Exchange (ETDEWEB)

Weiss, F.P.; Rindelhardt, U. [eds.

1999-09-01

The Institute of Safety Research is one of the five scientific institutes of Forschungszentrum Rossendorf e.V. The Forschungszentrum Rossendorf is a member of the 'Wissenschaftsgemeinschaft Gottfried Wilhelm Leibniz' and is funded by the Federal Ministry of Education and Research and by the Saxon Ministry of Science and Arts with 50% each. The research work of the institute aims at the assessment and increase of the safety and environmental sustainability of technical plants. The emphasis is put on the development and validation of mathematical and physical models for process and plant analysis, and of techniques for process and components monitoring. Subject of investigations are equally nuclear plants and installations of process industries. To analyse the thermo-fluiddynamics of normal plant operation and of the behaviour during accidents, physical models and computer codes are developed for multi-phase and multi-component flows, and for the space and time dependent heat release (neutron kinetics, chemical kinetics). (orig.)

Contributions for the third international carbon conference CARBON '80

International Nuclear Information System (INIS)

Delle, W.

1980-05-01

This report is a compilation of 8 papers prepared by KFA Juelich GmbH for the International Carbon Conference carbon 80 in Baden-Baden. The contributions deal mainly with materials problems which arise from the application of graphite and silicon carbide in High-Temperature Gas-Cooled Reactors, HTR. Most of the results described were obtained in the framework of the HTR Projects ''Hochtemperaturreaktor-Brennstoffkreislauf'' (High Temperature Reactor Fuel Cycle), HBK, that includes the partners Gesellschaft fuer Hochtemperaturreaktor-Technik mbH, Hochtemperaturreaktor-Brennelement GmbH, Hochtemperatur-Reaktorbau GmbH, Kernforschungsanlage Juelich GmbH, NUKEM GmbH and Sigri Elektrographit GmbH/Ringsdorff-Werke GmbH and ''Prototyp Nukleare Prozesswaerme'' (Prototype Nuclear Heat), PNP, for the development of procedures for the conversion of solid fossil raw materials by means of heat from High Temperature Gas-Cooled Reactors, that includes the partners Bergbau-Forschung GmbH, Gesellschaft fuer Hochtemperaturreaktor-Technik mbH, Hochtemperatur-Reaktorbau GmbH, Kernforschungsanlage Juelich GmbH and Rheinische Braunkohlenwerke AG. Both projects are financed by the Federal Ministry for Research and Technology and the State of North Rhine-Westphalia. (orig./IHOE) [de

The NOKO/TOPFLOW facility for natural convection flow

International Nuclear Information System (INIS)

Hicken, E.F.; Jaegers, H.; Schaffrath, A.; Weiss, F.-P.

2002-01-01

For the study of the effectiveness of passive safety systems a high pressure (up to 7 MPa) and high power (up to 4 MW) test facility - named NOKO - has been constructed and operated at the Forschungszentrum Juelich. From 1996-1998 this facility was used for a project within the 4th FP of the EU 'European BWR R and D Cluster for Innovative Passive Safety Systems'. An overview and selected results are given for the tests with two bundles of the emergency condenser, with the building and plate condenser, with 4 different passive initiators, with a passive flooding system and with decay heat removal tests during shutdown. It has been decided to decrease substantially the safety research at the Forschungszentrum Juelich; to maintain the experimental competence for two-phase flow the NOKO facility will be transferred to the Forschungszentrum Rossendorf by the end of the year 2000 up to the beginning of the year 2001. The facility will be named TOPFLOW; the main objectives of future tests will be oriented towards more generic research: investigation of steady state and transient two-phase flow phenomena especially transient two-phase flow patterns, the development of two-phase flow instrumentation, the generation of a data basis for Computational Fluid Dynamic (CFD)-Code validation and testing of heat exchangers and safety systems. An overview will be given about the modifications and improvements related to the test facility and the planned tests. (author)

1-cycle SANEX process development studies performed at Forschungszentrum Juelich

International Nuclear Information System (INIS)

Wilden, Andreas; Sypula, Michal; Schreinemachers, Christian; Kluxen, Paul; Modolo, Giuseppe

2010-01-01

In the framework of our research activities related to the partitioning of spent nuclear fuel solutions, the direct selective extraction of trivalent actinides from a simulated PUREX raffinate solution (1-cycle SANEX) was studied using a mixture of CyMe 4 BTBP and TODGA. The solvent showed a high selectivity for trivalent actinides with a high lanthanide separation factor. However the co-extraction of some fission products, such as Cu, Ni, Zr, Mo, Pd, Ag and Cd was observed. The extraction of Zr and Mo could be suppressed using oxalic acid but the use of the well-known Pd complexant HEDTA was unsuccessful. During screening experiments with different amino acids, the sulphur-bearing amino acid L-Cysteine showed good complexation of Pd and prevented its extraction into the organic phase without influencing the extraction of trivalent actinides. A strategy for a single-cycle process is proposed within this paper. (authors)

BMFT. Subproject environmental research, ecological research. Annual report 1991

International Nuclear Information System (INIS)

1992-01-01

This report summarizes the 1991 ecological research activities (ecosystems research, urban ecology, tropical ecology, forest decline, ecology of soils and waters, ecotoxicology, environmental pollution and health, protection of biotopes and protection of the species) which the project sponsors 'biology, energy, ecology' (Forschungszentrum Juelich) and 'environmental research and climatological research' (GSF-Forschungszentrum fuer Umwelt und Gesundheit) have been supervising on behalf of the Federal Ministry for Research and Technology to promote the subproject 'environmental research'. A general survey introduces the promoted projects, and standardized data sheets briefly introduce the individual activities. The appendix gives the project indices, the indices of joint projects, and a list of the supported companies and institutions. (BBR) [de

Partitioning of minor actinides: research at Juelich and Karlsruhe Research Centres

International Nuclear Information System (INIS)

Geist, A.; Weigl, M.; Gompper, K.; Modolo, G.

2007-01-01

Full text of publication follows. The work on minor actinide (MA) partitioning carried out at Karlsruhe and Juelich is integrated in the EC FP6 programme, EUROPART. Studies include the DIAMEX process (co-extraction of MA and lanthanides from PUREX raffinate) and the SANEX process (separation of MA from lanthanides). Aspects ranging from developing and improving highly selective and efficient extraction reagents, to fundamental structural studies, to process development and testing are covered. SANEX is a challenge in separation chemistry because of the chemical similarity of trivalent actinides and lanthanides. The extracting agents 2,6-di(5,6-di-propyl-1,2,4-triazine-3-yl)pyridine (n-Pr-BTP), developed at Karlsruhe, and the synergetic mixture of di(chloro-phenyl)di-thio-phosphinic acid (R2PSSH) with tri-n-octyl-phosphine oxide (TOPO), developed at Juelich, are considered a breakthrough because of their high separation efficiency in acidic systems. Separation factors for americium over lanthanides of more than 30 (R2PSSH+TOPO) and 130 (n-Pr-BTP) are achieved. To gain understanding of these selectivities, comparative investigations on the structures of curium and europium complexed with these SANEX ligands were performed at Karlsruhe. Extended X-ray absorption fine structure (EXAFS) analysis revealed distinct structural differences between curium and europium complexed with R2PSSH + TOPO, though no such differences were found for n-Pr-BTP. These investigations were therefore complemented by time-resolved laser fluorescence spectroscopic investigations (TRLFS), showing complex stabilities and speciation to differ between n-Pr-BTP complexes of curium and europium. Kinetics of mass transfer was studied for both R2PSSH+TOPO and n-Pr-BTP systems. For the R2PSSH + TOPO system, diffusion was identified to control extraction rates. For the n-Pr-BTP system, a slow chemical reaction was identified as the rate-controlling process. These results were implemented into computer

Development of closed orbit diagnostics towards EDM measurements at COSY in Juelich

Energy Technology Data Exchange (ETDEWEB)

Hinder, Fabian [Forschungszentrum Juelich, Institut fuer Kernphysik IV (Germany); RWTH Aachen University, III. Physikalisches Institut B (Germany); Collaboration: JEDI-Collaboration

2016-07-01

Electric Dipole Moments (EDMs) violate parity and time reversal symmetries. Assuming the CPT-theorem, this leads to CP violation, which is needed to explain the matter over antimatter dominance in the Universe. Thus, a non-zero EDM is a hint to new physics beyond the Standard Model. The JEDI collaboration (Juelich Electric Dipole moment Investigations) has started investigations of a direct EDM measurement of protons and deuterons at a storage ring. To measure a tiny EDM signal with high precision, systematic effects have to be controlled to the same level. One major source of systematic uncertainties is a distortion of the closed orbit. To control and measure this effect, the orbit measurement system, including the readout electronics, the orbit correction system and the beam position monitor pick-ups are improved. All the mentioned developments are ongoing at the Cooler Synchrotron (COSY) at Juelich. The achievements in the mentioned fields are presented at the conference.

Cost accounting in Kernforschungsanlage Juelich Gesellschaft mit beschraenkter Haftung (KFA)

International Nuclear Information System (INIS)

Seidel, G.; Schilling, H.

1979-01-01

The paper gives an overview about the organization and the research program of the Kernforschungsanalage Juelich Gesellschaft mit beschraenkter Haftung (KFA). The cost accounting system is discussed in detail, cost categories, cost centers, units of production and the data flow of the cost accounting are described. The distribution of the resulting management accounting reports and all sorts of EDP-result listings of the cost accounting system is described. (A.N.)

Forschungszentrum Rossendorf, Institute of Ion Beam Physics and Materials Research. Annual Report 1994

International Nuclear Information System (INIS)

Moeller, W.; Wieser, E.; Kirch, S.

1995-03-01

This volume contains the 1994 annual report describing the scientific activity of the Institute of Ion Beam Physics and Material Research (Forschungszentrum Rossendorf, FZR). This institute is devoted to the application of ion beams for the modification and analysis of near-surface layers of solids. (MSA)

The Juelich compact cyclotron - a multi-purpose irradiation facility

International Nuclear Information System (INIS)

Hemmerich, J.; Hoelzle, R.; Kogler, W.

1977-01-01

A commercially available variable-energy compact cyclotron has been installed at the Kernforschungsanlage Juelich. It is equipped to accelerate protons, deuterons, 3 He- and α-particles. A +- 60 0 switching magnet allows to switch the beam to any of seven external target stations. Three separately shielded target rooms allow a flexible use of the cyclotron for a wide range of applications such as production of short-lived nuclides, activation analysis, radiation damage studies in metals and studies of biological effects of fast neutron irradiation. (orig.) [de

The programme 'fission product deposition' at the IRB of Juelich nuclear research centre

International Nuclear Information System (INIS)

Gottaut, H.; Iniotakis, N.; Malinowski, J.; Muenchow, K.H.; Sackmann, B.

1976-01-01

The transport and deposition behaviour of the non-gaseous fission and activation products in the primary circuit of HTR-type reactors determines the possibility of inspection and maintenance of single components of the primary circuit as well as the safety of the reactor in normal operation and during accidents. For the investigation of these problems, the programme 'fission product deposition' was started at Juelich nuclear research centre in 1969 in cooperation with a number of industrial firms. The programme covers in-pile and out-of-pile experiments, in which the HTR conditions are simulated as realistically as possible, as well as various laboratory experiments and extensive theoretical studies. It is the objective of this work to establish a realistic physical model and computer programme with which the transport and deposition of nuclides in the primary circuit of HTR reactors can be calculated in advance. A report is given on the experimental and theoretical studies carried out at the IRB of Juelich nuclear research centre. (orig./AK) [de

Development of Mitsui/Juelich Incineration System and hydro-thermal ash solidification

International Nuclear Information System (INIS)

Suzuki, S.; Kamada, S.; Nakamori, Y.; Katakura, M.; Yamazaki, N.

1988-01-01

This paper summarizes the developing program for Mitsui/Juelich Incinerated System combined with Hydrothermal ash solidification. The system is an integrated one and capable for volume reduction of various kind of radioactive waste and safe disposal of residual incinerator ash. The system also has an advantage of reducing construction and operation cost. An outline of the incineration plant is also presented in this paper

Incineration of wastes from nuclear installations with the Juelich incineration process

International Nuclear Information System (INIS)

Wilke, M.

1979-01-01

In the Juelich Research Center a two-stage incineration process has been developed which, due to an integral thermal treatment stage, is most suitable for the incineration of heterogeneous waste material. The major advantages of this technique are to be seen in the fact that mechanical treatment of the waste material is no longer required and that off gas treatment is considerably facilitated. (orig.) [de

New experimental results on electron cooling at COSY-Juelich

International Nuclear Information System (INIS)

Dietrich, J.; Maier, R.; Prasuhn, D.; Stein, H.J.; Kobets, A.; Meshkov, I.; Sidorin, A.; Smirnov, A.

2007-01-01

Recent results of electron cooling of proton beams at COSY-Juelich are reported. Cooling at an electron energy of 70 keV has been studied for the first time. At the injection energy level of COSY, corresponding to 24.5 keV electron energy, the features of the cooled proton beam at extremely low intensities have been investigated in order to find out whether an ordering of the proton beam can be achieved. Such investigations are motivated by the results of a numerical simulation of the ordering process by the BETACOOL code. (author)

Seasonal trends of NH4+ and NO3- nitrogen isotope composition in rain collected at Juelich, Germany

International Nuclear Information System (INIS)

Freyer, H.D.

1978-01-01

Data are presented on nitrogen isotope composition in ammonium and nitrate from rain-water collected over 2 years in an interior area at Juelich, Germany. The seasonal trends in these data are discussed relative to natural and anthropogenic emissions of nitrogen compounds which additionally have been measured or estimated in their isotope composition, e.g. ammonia from animal urine, fuel combustion, fertilizer use and organic soil nitrogen, and natural and anthropogenic nitric oxides from automobile exhausts as well. The 15 N content of Juelich rain ammonium is found to be different from values of Hoering (1957) and Moore (1974) and from other rain samples collected in coastal areas. (Auth.)

PISCES and ALT-II: Juelich PSI papers

International Nuclear Information System (INIS)

Conn, R.W.; Hirooka, Y.; LaBombard, B.

1988-08-01

This publication comprises papers from the PISCES and ALT-II Programs at UCLA which were presented at the International Plasma Surface Interactions Meeting held in Juelich, FRG, on May 2-6, 1988. A list of publications from the PISCES and ALT-II contained in this report are: Deuterium pumping and erosion behavior of selected graphite materials under high flux plasma bombardment in PISCES; Erosion and redeposition behavior of selected NET-candidate materials under high-flux hydrogen, deuterium plasma bombardment in PISCES; Presheath profiles in simulated tokamak edge plasmas; Boundary asymmetries and plasma flow to the ALT-II toroidal belt pump limiter; ALT-II toroidal belt pump limiter performance in TEXTOR; and An in-situ spectroscopic erosion yield measurement with applications to sputtering and surface morphology alterations

500 MHz narrowband beam position monitor electronics for electron synchrotrons

International Nuclear Information System (INIS)

Mohos, I.; Dietrich, J.

1998-01-01

Narrowband beam position monitor electronics were developed in the Forschungszentrum Juelich-IKP for the orbit measurement equipment used at ELSA Bonn. The equipment uses 32 monitor chambers, each with four capacitive button electrodes. The monitor electronics, consisting of an rf signal processing module (BPM-RF) and a data acquisition and control module (BPM-DAQ), sequentially process and measure the monitor signals and deliver calculated horizontal and vertical beam position data via a serial network

The nuclear detectives. The international atomic energy agency IAEA is supposed to trace countries that produce or disseminate nuclear materials for nuclear weapons. A team from Juelich is supporting the process; Die Nukleardetektive. Die internationale Atomenergie-Organisation IAEO soll Staaten aufspueren, die heimlich nukleares Material fuer Atomwaffen herstellen oder verbreiten. Ein Juelicher Team unterstuetzt sie dabei

Energy Technology Data Exchange (ETDEWEB)

Frick, Frank

2015-07-01

The Juelich Team is part of the International Standing Advisory Group on Safeguard Implementation that is supposed to find violations of the Non-Proliferation Treaty. Using wipe cloth in nuclear facilities it is possible to find uranium or plutonium containing particles. The study of the isotopic composition of uranium particles allows the identification of the uranium enrichment in the facility. In Juelich reference uranium particles with defined isotopic composition are produced for calibration purposes. The Juelich team supporting IAEA is also developing computer programs for the automatic processing of satellite data with respect to nuclear facilities.

Main Achievements 2003-2004 - Nuclear Physics

International Nuclear Information System (INIS)

2005-01-01

Two Departments of our Institute are engaged in nuclear studies, in the following areas: studies of the nuclear reaction mechanism at low, intermediate and high energies, studies of nuclear structure by means of gamma spectroscopy, and theoretical research concerning nuclear structure and reaction mechanisms. Most of these studies are carried out in the form of international collaborations with the world-leading nuclear physics experimental facilities. Our physicists usually play an important role in these collaborative projects and often lead them. Nuclear structure experiments were performed mainly within the following European Large Scale Facilities: ALPI-INFN-Legnaro, VIVITRONIReS-Strasbourg, UNILAC/SIS-GSI-Darmstadt, K100-Cyclotron-Jyvaeskylea with the use of the GASP, GARFIELD, EUROBALL, ICARE, RISING + FRS, RITU+JUROGAM systems and with the application of RFD, HECTOR, DIAMANT, EUCLIDES ancillary detectors. Experimental data were also obtained at the Argonne National Laboratory, USA, with the GAMMASPHERE array and the ATLAS accelerator. In addition, we are involved in planning the experiments for the project of international accelerator facility of the next generation FAIR (Facility for Antiproton and Ion Research) at GSI. The nuclear reaction experiments were performed at the Joint Institute of Nuclear Physics in Dubna (collaborations FASA and COMBAS), in GANIL in Caen, in the Forschungszentrum Juelich at the accelerator COSY in the framework of collaboration PISA, as well as at the Warsaw Laboratory of Heavy Ions. The hadronic nuclear physics experiments were carried out exclusively at the Forschungszentrum Juelich where we have participated in international collaborations COSY11, GEM and HIRES. Recently, we have joined international detector project WASA planned at Forschungszentrum Juelich and plan to participate in the project PANDA, being constructed in GSI Darmstadt. Both detectors will be devoted to low and intermediate hadronic physics. We also

Study on the construction of a combined cooler-synchroton ring at the KFA Juelich (COSY study)

International Nuclear Information System (INIS)

Gaul, G.; Hagedoorn, H.; Heide, J.A. van der; Hinterberger, F.; Huber, M.; Jahn, R.; Mayer-Kuckuk, T.; Paetz genannt Schieck, H.; Berg, G.; Hardt, A.; Martin, S.; Osterfeld, F.; Prasuhn, D.; Riepe, G.; Rogge, M.; Rossen, P. von; Schult, O.W.B.; Speth, J.; Turek, P.

1984-02-01

The project of a storage ring for the extension of the nuclear physics research facilities at the KFA Juelich is presented. Together with the construction of the ring the possibilities for physical research are described. (HSI) [de

Getting Scientists Ready for Open Access: The Approaches of Forschungszentrum Jülich

Directory of Open Access Journals (Sweden)

Thomas Arndt

2018-05-01

Full Text Available Many scientific institutions are faced with the question of how they should inform their scientists and scientific coordinators about the option of publishing open access. This task is one that libraries have taken upon themselves: libraries are familiar with the market participants and have years of experience in teaching information and publication literacy. This case report looks at two approaches taken by the Central Library of Forschungszentrum Jülich in 2017. It highlights the motivation, strategy, resources and implementation, as well as the first evaluation of both approaches. The first approach was a redesign of the training courses offered by the Central Library with a focus on the target groups and new contents. The second approach was implemented as part of International Open Access Week and involved offering an information event tailored to each scientific institute. The event was customized to meet the needs of the target group defined by each institute, the institute itself, and was organized individually. As a result of these efforts, the open access rate increased over the last few months and at 48% open access in 2017, Forschungszentrum Jülich is well on its way to achieving the open access goals set by the Helmholtz Association.

Fast methods for long-range interactions in complex systems. Lecture notes

Energy Technology Data Exchange (ETDEWEB)

Sutmann, Godehard; Gibbon, Paul; Lippert, Thomas (eds.)

2011-10-13

Parallel computing and computer simulations of complex particle systems including charges have an ever increasing impact in a broad range of fields in the physical sciences, e.g. in astrophysics, statistical physics, plasma physics, material sciences, physical chemistry, and biophysics. The present summer school, funded by the German Heraeus-Foundation, took place at the Juelich Supercomputing Centre from 6 - 10 September 2010. The focus was on providing an introduction and overview over different methods, algorithms and new trends for the computational treatment of long-range interactions in particle systems. The Lecture Notes contain an introduction into particle simulation, as well as five different fast methods, i.e. the Fast Multipole Method, Barnes-Hut Tree Method, Multigrid, FFT based methods, and Fast Summation using the non-equidistant FFT. In addition to introducing the methods, efficient parallelization of the methods is presented in detail. This publication was edited at the Juelich Supercomputing Centre (JSC) which is an integral part of the Institute for Advanced Simulation (IAS). The IAS combines the Juelich simulation sciences and the supercomputer facility in one organizational unit. It includes those parts of the scientific institutes at Forschungszentrum Juelich which use simulation on supercomputers as their main research methodology. (orig.)

Fast methods for long-range interactions in complex systems. Lecture notes

International Nuclear Information System (INIS)

Sutmann, Godehard; Gibbon, Paul; Lippert, Thomas

2011-01-01

Parallel computing and computer simulations of complex particle systems including charges have an ever increasing impact in a broad range of fields in the physical sciences, e.g. in astrophysics, statistical physics, plasma physics, material sciences, physical chemistry, and biophysics. The present summer school, funded by the German Heraeus-Foundation, took place at the Juelich Supercomputing Centre from 6 - 10 September 2010. The focus was on providing an introduction and overview over different methods, algorithms and new trends for the computational treatment of long-range interactions in particle systems. The Lecture Notes contain an introduction into particle simulation, as well as five different fast methods, i.e. the Fast Multipole Method, Barnes-Hut Tree Method, Multigrid, FFT based methods, and Fast Summation using the non-equidistant FFT. In addition to introducing the methods, efficient parallelization of the methods is presented in detail. This publication was edited at the Juelich Supercomputing Centre (JSC) which is an integral part of the Institute for Advanced Simulation (IAS). The IAS combines the Juelich simulation sciences and the supercomputer facility in one organizational unit. It includes those parts of the scientific institutes at Forschungszentrum Juelich which use simulation on supercomputers as their main research methodology. (orig.)

Incineration of dry burnable waste from reprocessing plants with the Juelich incineration process

International Nuclear Information System (INIS)

Dietrich, H.; Gomoll, H.; Lins, H.

1987-01-01

The Juelich incineration process is a two stage controlled air incineration process which has been developed for efficient volume reduction of dry burnable waste of various kinds arising at nuclear facilities. It has also been applied to non nuclear industrial and hospital waste incineration and has recently been selected for the new German Fuel Reprocessing Plant under construction in Wackersdorf, Bavaria, in a modified design

The new polarized neutron reflectometer in Juelich

International Nuclear Information System (INIS)

Ruecker, U.; Alefeld, B.; Bergs, W.; Kentzinger, E.; Brueckel, T.

1999-01-01

On the basis of the HADAS spectrometer in the guide hall of the Juelich research reactor FRJ-2 a polarized neutron reflectometer is build with a 2D-position sensitive detector system. The new spectrometer is optimized for reflectivity and diffuse magnetic scattering measurements with small incident angles on thin magnetic films with thicknesses in the nm range. The polarization analyzer covers the whole detector area, so that a range of 2.5 deg in the scattering angle can be measured simultaneously. The analyzer consists of a stack of supermirrors tilted against the scattering plane. In this reflection geometry, the momentum transfer resolution of the instrument is not reduced, but the sample height is limited to 17 mm. For the monochromator, polarizer and collimation different setups have been compared on the basis of Monte-Carlo calculations: a focusing elliptical supermirror monochromator, a cylindrical mirror, a focusing pyrolytic graphite double monochromator and a double monochromator with bent perfect Si crystals. (author)

GSF-Forschungszentrum fuer Umwelt und Gesundheit, Institut fuer Hydrologie. Annual report 1995; GSF-Forschungszentrum fuer Umwelt und Gesundheit, Institut fuer Hydrologie. Jahresbericht 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-09-01

The 1995 annual report of the Institute of Hydrology presents the findings of 19 current research projects on different subjects in hydrology. It is supplemented by information on cooperation with other scientific institutions in the form of lists of publications and reports, lectures and posters, university teaching projects, and finished and current dissertations. (VHE) [Deutsch] Der Jahresbericht 1995 des Institutes fuer Hydrologie im GSF-Forschungszentrum fuer Umwelt und Gesundheit stellt die Ergebnisse von derzeit 19 laufenden Untersuchungen zu unterschiedlichen hydrologischen Themen vor. Ergaenzt werden die Ausfuehrungen durch einen Ueberblick ueber die Zusammenarbeit mit anderen wissenschaftlichen Institutionen in Form von Verzeichnissen der Veroeffentlichungen und Berichte, der Vortraege und Poster, der Beitraege zur Lehre an Hochschulen sowie der abgeschlossenen und laufenden Dissertationen. (VHE)

Radiation protection monitoring for #betta#-radiation at the Juelich Nuclear Research Centre

International Nuclear Information System (INIS)

Keller, M.; Heinzelmann, M.

1983-01-01

A complete system for radiation protection monitoring also includes #betta#-radiation monitoring. This requires suitable dose rate meters, personal dosemeters and last but not least detailed information about possible radiation exposure due to #betta#-radiation. Since there are at present no suitable #betta#-dosemeters available on the market yet, a large nuclear research centre such as the KFA Juelich, where radioactive substances are being handled by more than 1600 persons, has the task of developing and deploying suitable dosemeters. The centre's accomplishments in this area are described

PeDaB - the personal dosimetry database at the research centre Juelich

International Nuclear Information System (INIS)

Geisse, C.; Hill, P.; Paschke, M.; Hille, R.; Schlaeger, M.

1998-01-01

In May, 1997 the mainframe based registration, processing and archiving of personal monitoring data at the research centre Juelich (FZJ) was transferred to a client server system. A complex database application was developed. The client user interface is a Windows based Microsoft ACCESS application which is connected to an ORACLE database via ODBC and TCP/IP. The conversion covered all areas of personal dosimetry including internal and external exposition as well as administrative areas. A higher degree of flexibility, data security and integrity was achieved. (orig.) [de

Scientific and technical publications of Juelich Research Centre, January 1988-June 1992

International Nuclear Information System (INIS)

1992-01-01

The scientific and technical publications of Juelich Research Centre from January 1988 through June 1992 are listed under the following headings: General publications; Mathematics, computers, cybernetics; General physics; Atomic and nuclear physics; Solid state physics; Materials; Analytical chemistry; Engineering; Reactor Engineering; Metrology; Biology; Biotechnology; Agriculture; Energy; Medicine; Ecology; Plasma physics and fusion reactor technology; Physico-chemistry; Nuclear chemistry and radiochemistry; Chemical engineering; Electrical engineering, electronics; Geosciences. There is an author's index with report numbers (JUEL-, JUEL-BIBL-, JUEL-CONF, JUEL-SPEZ). (orig./BBR) [de

Radiochemical analysis in the nuclear research establishment (KFA) Juelich, FRG

International Nuclear Information System (INIS)

Anon.

1975-01-01

KFA Juelich is one of the two great nuclear research centres of the Federal Republic of Germany. About 3700 employees including about 700 scientists are engaged in a great number of programs and projects belonging to six main fields of research and development: high temperature reactor and energy techniques; nuclear fusion; properties of materials; materials research; life and environment; methods. In the article the radiochemical analysis work of the former Central Institute of Analytical Chemistry and its two successors is described: activation analysis, application of tracer techniques, fission product analysis. Further on the irradiation facilities are described, a short survey is given on the instrumentation, and the future work is outlined. (T.G.)

Radioactivity monitoring by the official monitoring stations in North-Rhine Westphalia and the Juelich Nuclear Research Centre after the Chernobyl reactor accident

International Nuclear Information System (INIS)

1986-01-01

This official report presents a governmental declaration of the prime minister of NRW, Mr. Rau, concerning the reactor accident at Chernobyl, and a joint declaration of ministers of NRW, concerning the impact of the accident on the Land NRW. These statements are completed by six official reports on radioactivity measurements carried out by the official monitoring stations of the Land and by the KFA Juelich. These reports inform about methods, scope, and results of the measuring campaigns accomplished by the Zentralstelle fuer Sicherheitstechnik (ZFS), the public materials testing office (MPA), the Chemisches Untersuchungsamt, the Landesamt fuer Wasser und Abfall, and the KFA Juelich. (DG) [de

SRF technology at accel for worldwide accelerator projects

International Nuclear Information System (INIS)

Bauer, S.; Griep, B.; Peiniger, M.; Pekeler, M.; Piel, C.; Stein, P. vom; Vogel, H.

2003-01-01

Within the last two years activities at ACCEL for international accelerator projects using superconducting cavities have steadily increased. We report on our production work for CERN (HOM couplers for LHC cavities), DESY (TESLA cavities and couplers), Forschungszentrum Juelich (turn key low beta SRF module), SRRC, CLS and Cornell (turn key 500 MHz SRF modules. The production a superconducting Landau accelerator module for BESSY has started recently. In addition studies are under way for a superconducting 40 MeV proton/deuteron linac and for superconducting low beta multi gap structures. (author)

Past and present situation of nuclear research at Forschungszentrum Karlsruhe

International Nuclear Information System (INIS)

Scholtyssek, W.

2001-01-01

The case of Forschungszentrum Karlsruhe is presented which had to transform from a centre devoted to nuclear power R and D to one in which this activity is allocated only 20% of the resources. A large number of operating nuclear power reactors coupled with the Government decision to phase out nuclear power is causing serious concerns regarding the availability of human resources for meeting the long term needs of nuclear facilities. The Energy Division of the research centre currently focuses mainly on safety research and on nuclear fusion. Another Division of the centre has nuclear facility decommissioning as one of the programmes. Independent research in areas of essential need for nuclear facilities must be carried out to maintain know how. (author)

JUELICH: COSY acceleration and cooling

International Nuclear Information System (INIS)

Anon.

1993-01-01

The COSY cooler synchrotron at the KFA Forschungszentrum Jülich, inaugurated on 1 April, is now well on its way towards precision-defined high energy beams to open new fields for Jülich physics experiments. In two important goals, on 25 May the first beam cooled by electrons circulated inside the accelerator, then on 25 July physicists succeeded in accelerating the beam from the 270 MeV/c injection momentum to 600 MeV. Shortly after, this was pushed well above 1 GeV. Throughout the tuning process the number of stored particles increased steadily, finally peaking at 1.1 x 10 11 , a value compatible with the predicted limit at the injection energy. This success was the result of a painstaking search for the optimum parameter set, the commissioning crew being acutely aware that bringing such a large machine on line was a major experiment in its own right. The 3.3 GeV/c COSY machine belongs to the new class of hadron storage and cooler synchrotrons which started with CERN's LEAR low energy antiproton ring. COSY will 'sharpen' its beams to a narrow momentum spread using both electron and stochastic cooling to control the circulating particles. In addition it will provide space for internal experiments. Both features will allow for novel experimental approaches, and more than 100 physicists are eagerly waiting for the first proton reactions in their detectors

Nuclear Research Centre Juelich (KFA). Annual report 1984/85

International Nuclear Information System (INIS)

1985-09-01

The annual report from the Nuclear Research Centre in Juelich (KFA) consist of four differently coloured parts. The 'white part' - from the research - published topical contributions from authors writing popular science. Subjects were chosen from the viewpoint of a journalist rather than oriented on the research field of the KFA. The 'yellow part' - reports on research and development - is a survey of the scientific-technological work of KFA structured according to the main fields of research of KFA. The 'green part' - research institutes and scientific-technological joint ventures - describes tasks and objectives of the individual institutes/joint ventures. The 'blue part' - organisation, administration and technical infrastructure - contains information on management, organisation and administration of KFA (personnel department, PR, finances, purchase- and material disposal department, cost and planning, cooperation and use of know-how, projects, technical equipment). (orig.) [de

Hypernuclear properties derived from the Juelich hyperon-nucleon interaction (in comparison with the Nijmegen interactions)

International Nuclear Information System (INIS)

Yamamoto, Y.; Reuber, A.; Himeno, H.; Nagata, S.; Motoba, T.

1992-01-01

The G-matrix interactions are derived from the Juelich YN interaction models A and B, compared with those from the Nijmegen models. The DDHF calculations for heavy Λ hypernuclei and the shell-model analysis for spin-doublet states of light hypernuclei are performed by use of the G-matrix interactions. It is demonstrated that the OBE models can be tested by the hypernuclear calculations. (author) 3 tabs., 5 figs., 23 refs

High heat flux components with Be armour before and after neutron irradiation

International Nuclear Information System (INIS)

Lodato, A.; Derz, H.; Duwe, R.; Linke, J.; Roedig, M.

2000-01-01

Beryllium/copper mock-ups produced by different joining techniques have been tested in the electron beam facility JUDITH (Juelich Divertor Test Facility in Hot Cells) at Forschungszentrum Juelich. The experiments described in this paper represent the conclusive part of a test program started in 1994. The properties of non-irradiated Be/Cu joints have been characterised in a previous test campaign. Post-irradiation tests are now being carried out to investigate the neutron damage on the joints. The neutron irradiation on selected mock-ups has been carried out in the High Flux Reactor (HFR) at Petten (The Netherlands). Parametric finite element thermal analyses have been carried out to establish the allowable heat flux value to be applied during the tests. Screening tests up to power densities of ∼7 MW/m 2 and thermal fatigue tests up to 1000 cycles have been performed. None of these mock-ups showed any indication of failure. Post-mortem analyses (metallography, SEM) have also been conducted

Forschungszentrum Rossendorf, Institute of Safety Research. Annual report 2004

International Nuclear Information System (INIS)

Weiss, F.P.; Rindelhardt, U.

2005-01-01

The Institute of Safety Research (ISR) is one of the six Research Institutes of Forschungszentrum Rossendorf e.V. (FZR e.V.) which is a member institution of the Wissenschaftsgemeinschaft Gottfried Wilhelm Leibniz (Leibniz Association). Together with the Institute of Radiochemistry, ISR constitutes the research programme ''Safety and Environment'' which is one from three scientific programmes of FZR. In the framework of this research programme, the institute is responsible for the two subprogrammes ''Plant and Reactor Safety'' and ''Thermal Fluid Dynamics'', respectively. We also provide minor contributions to the sub-programme ''Radio-Ecology''. Moreover, with the development of a pulsed photo-neutron source at the radiation source ELBE (Electron linear accelerator for beams of high brilliance and low emittance), we are involved in a networking project carried out by the FZR Institute of Nuclear and Hadron Physics, the Physics Department of TU Dresden, and ISR. (orig.)

Proceedings of the spring meeting of the Study Group for Electronic Instrumentation on April 3-5, 1995 in Juelich

International Nuclear Information System (INIS)

1995-06-01

The 17 papers presented at the meeting give a survey of recent progress in the field of electronic instrumentation of scientific and technical measuring instruments, achieved at the research centers of KFA Juelich, TU Graz, HMI Berlin, Karlsruhe FZ, and Rossendorf FZ. (DG) [de

Forschungszentrum Rossendorf, Institute of Radiochemistry. Annual report 2001

International Nuclear Information System (INIS)

Fanghaenel, T.; Bernhard, G.; Engelmann, H.J.

2002-05-01

The Institute of Radiochemistry (IRC), one of the five institutes of the Forschungszentrum Rossendorf (FZR) performs basic and applied research in the fields of radiochemistry and radioecology. Main goal is the quantification of the interaction and mobility of radionuclides in the geo- and biosphere. Because of their high radiotoxicity and long half-life the actinides are of special interest. Among the actinides uranium and its manifold interactions plays a major role in the institute's research activities. In addition the interactions of some important long-lived fission and decay products are studied. More than 60 scientists, technicians and PhD students are employed in the Institute of Radiochemistry. The research is focused on understanding the fundamental processes relevant for the behavior of radionuclides in the environment. Main topics are: Aquatic chemistry, Radionuclide interaction with mineral surfaces, Radionuclide interaction with biological materials (bacteria and plants), Modeling the radionuclide transport, Development of spectroscopic speciation methods We accomplished many new scientific results in the past year, which are presented in this Annual Report. (orig.)

On the operating experience of the Doppler Sodar system at the Forschungszentrum Juelich

International Nuclear Information System (INIS)

Adiga, B.B.; Zeuner, G.

1990-04-01

In this report the description and the operating principles of the Doppler Sodar at the KFA are briefly described and outputs from the routine operation of the Sodar are compared with the concurrently measured data on the 120 m high KFA meteorological tower. Three sets of data, varying from periods of ten days to 18 days, are used for the comparison. (orig.)

Forschungszentrum Rossendorf, Institute of Safety Research. Annual report 2004

Energy Technology Data Exchange (ETDEWEB)

Weiss, F.P.; Rindelhardt, U. (eds.)

2005-07-01

The Institute of Safety Research (ISR) is one of the six Research Institutes of Forschungszentrum Rossendorf e.V. (FZR e.V.) which is a member institution of the Wissenschaftsgemeinschaft Gottfried Wilhelm Leibniz (Leibniz Association). Together with the Institute of Radiochemistry, ISR constitutes the research programme ''Safety and Environment'' which is one from three scientific programmes of FZR. In the framework of this research programme, the institute is responsible for the two subprogrammes ''Plant and Reactor Safety'' and ''Thermal Fluid Dynamics'', respectively. We also provide minor contributions to the sub-programme ''Radio-Ecology''. Moreover, with the development of a pulsed photo-neutron source at the radiation source ELBE (Electron linear accelerator for beams of high brilliance and low emittance), we are involved in a networking project carried out by the FZR Institute of Nuclear and Hadron Physics, the Physics Department of TU Dresden, and ISR. (orig.)

First Ph.D. Student Workshop of the Hermann von Helmholtz Association of National Research Centers (HGF) on ''Nuclear Safety Research''

International Nuclear Information System (INIS)

Knebel, J.U.; Sanchez Espinoza, V.H.

2006-03-01

The First Ph.D. Student Workshop ''Nuclear Safety Research'' of the Helmholtz Association of National Research Centers (HGF)'' was jointly organized by the Research Center Karlsruhe GmbH and the Energie Baden-Wuerttemberg AG (EnBW) from Wednesday 9th to Friday 11th March 2005. The workshop was opened with welcome greetings by Dr. Peter Fritz, Forschungszentrum Karlsruhe. Subsequently Dr. Joachim U. Knebel explained the main goals and the content of the workshop. The young scientists reported in 28 high-level presentations about their research work which covered a wide spectrum from reactor safety, partitions and transmutation, and innovative reactor systems, to safety research for nuclear waste disposal. The junior researchs showed excellent professional competence and demonstrated presentation qualities at the highest level. The successful funding of two Virtual Institutes, namely: the ''Competence in Nuclear Technologies'' and ''Functional Characteristics of Aquatic Interfaces both co-ordinated by Forschungszentrum Karlsruhe'', by the President of the Helmholtz Association Prof. Walter Kroell was the motivation for the organization of this first Ph.D. Student Workshop. Thanks to these two Virtual Institutes, the Reseach Center Karlsruhe and Juelich together with several univer-sities i.e. RWTH Aachen, Heidelberg, Karlsruhe, Muenster, and Stuttgart, have successfully financed eight Ph.D. and two post-doctoral students. Moreover, young scientists of the European Institute for Transuranium Elements (ITU) and additional seven Ph.D. Students, who are sponsored by the German nuclear industry (Framatome ANP, RWE Power, EnBW) in the frame of the Alliance Competence in on Nuclear Technology, and who are trained at Forschungszentrum Karlsruhe, actively contributed to this workshop. The EnBW-Award was handed over by Dr. Hans-Josef Zimmer, member of the board of directors of the EnBW-Kraftwerksgesellschaft, to Mrs. Ayelet Walter from the University of Stuttgart for the best

List of reports of the Kernforschungsanlage Juelich published between October 1972 and December 1975

International Nuclear Information System (INIS)

1976-03-01

This is a compilation of the Juel reports published by Kernforschungsanlage Juelich between October, 1972, and December, 1975. The compilation was made by automatic data processing. It applies to the fields mathematics, computers, kybernetics; general and solid state physics; plasma physics and fusion reactor technology; atomic and nuclear physics; reactor engineering, reactor physics, applied nuclear physics; thermionics and technical physics, organic, physical, radio-radiation and nuclear chemistry, analytical chemistry; chemical engineering, materials, general engineering; instruments and methods of measurement; biology and agriculture; medicine; environment, radiation protection; energy problems. (HK) [de

Leakage in the Juelich research reactor

International Nuclear Information System (INIS)

Anon.

1978-01-01

On August 17, 1978, a leakage occurred in the DIDO research reactor. Early in the afternoon of this day, the valves of the coolant loop had been checked with the reactor shut off. When the mechanics wanted to oil a tight valve and drilled a hole in the valve cover for this, heavy water started to leak (leakage in the valve membrane). The mechanics left the shielded valve space at once; directly after having a shower, they underwent a radiation protection examination. It was found that none of the mechanics had been exposed to an excessive dose. When other mechanics in protective suits had closed the leak in the valve, a total of 150 liters had leaked into the sump pump at the valve entrance. They were pumped back into the cooling system. About 5 liters of water were evaporated and, via the stack, escaped into the environment. The activity released was about 40 curie; this is less than the permissible amount of 60 curie per week during normal operation. Neither the KFA personnel nor the inhabitants of Juelich and its surroundings were in danger at any moment. Calculations so far yield a maximum radiation exposure below 1mrem at the point of maximum exposure. The cooling circuit could be entered again only one day after the incident. The present shut-off phase of the reactor is not unduly prolonged by this accident. (orig./HP) [de

NIC symposium 2010. Proceedings

Energy Technology Data Exchange (ETDEWEB)

Muenster, Gernot [Muenster Univ. (Germany). Inst. fuer Theoretische Physik 1; Wolf, Dietrich [Duisburg-Essen Univ., Duisburg (Germany). Fakultaet fuer Physik; Kremer, Manfred (eds.) [Forschungszentrum Juelich GmbH (DE). Juelich Supercomputing Centre (JSC)

2012-06-21

The fifth NIC-Symposium gave an overview of the activities of the John von Neumann Institute for Computing (NIC) and of the results obtained in the last two years by research groups supported by the NIC. The large recent progress in supercomputing is highlighted by the fact that the newly installed Blue Gene/P system in Juelich - with a peak performance of 1 Petaflop/s - currently ranks number four in the TOP500 list. This development opens new dimensions in simulation science for researchers in Germany and Europe. NIC - a joint foundation of Forschungszentrum Juelich, Deutsches Elektronen-Synchrotron (DESY) and Gesellschaft fuer Schwerionenforschung (GSI) - supports with its members' supercomputer facilities about 130 research groups at universities and national labs working on computer simulations in various fields of science. Fifteen invited lectures covered selected topics in the following fields: Astrophysics Biophysics Chemistry Elementary Particle Physics Condensed Matter Materials Science Soft Matter Science Environmental Research Hydrodynamics and turbulence Plasma Physics Computer Science The talks are intended to inform a broad audience of scientists and the interested public about the research activities at NIC. The proceedings of the symposium cover projects that have been supported by the IBM supercomputers JUMP and IBM Blue Gene/P in Juelich and the APE topical computer at DESY-Zeuthen in an even wider range than the lectures.

NIC symposium 2010. Proceedings

Energy Technology Data Exchange (ETDEWEB)

Muenster, Gernot [Muenster Univ. (Germany). Inst. fuer Theoretische Physik 1; Wolf, Dietrich [Duisburg-Essen Univ., Duisburg (Germany). Fakultaet fuer Physik; Kremer, Manfred [Forschungszentrum Juelich GmbH (DE). Juelich Supercomputing Centre (JSC)

2012-06-21

The fifth NIC-Symposium gave an overview of the activities of the John von Neumann Institute for Computing (NIC) and of the results obtained in the last two years by research groups supported by the NIC. The large recent progress in supercomputing is highlighted by the fact that the newly installed Blue Gene/P system in Juelich - with a peak performance of 1 Petaflop/s - currently ranks number four in the TOP500 list. This development opens new dimensions in simulation science for researchers in Germany and Europe. NIC - a joint foundation of Forschungszentrum Juelich, Deutsches Elektronen-Synchrotron (DESY) and Gesellschaft fuer Schwerionenforschung (GSI) - supports with its members' supercomputer facilities about 130 research groups at universities and national labs working on computer simulations in various fields of science. Fifteen invited lectures covered selected topics in the following fields: Astrophysics Biophysics Chemistry Elementary Particle Physics Condensed Matter Materials Science Soft Matter Science Environmental Research Hydrodynamics and turbulence Plasma Physics Computer Science The talks are intended to inform a broad audience of scientists and the interested public about the research activities at NIC. The proceedings of the symposium cover projects that have been supported by the IBM supercomputers JUMP and IBM Blue Gene/P in Juelich and the APE topical computer at DESY-Zeuthen in an even wider range than the lectures.

NIC symposium 2010. Proceedings

International Nuclear Information System (INIS)

Muenster, Gernot

2012-01-01

The fifth NIC-Symposium gave an overview of the activities of the John von Neumann Institute for Computing (NIC) and of the results obtained in the last two years by research groups supported by the NIC. The large recent progress in supercomputing is highlighted by the fact that the newly installed Blue Gene/P system in Juelich - with a peak performance of 1 Petaflop/s - currently ranks number four in the TOP500 list. This development opens new dimensions in simulation science for researchers in Germany and Europe. NIC - a joint foundation of Forschungszentrum Juelich, Deutsches Elektronen-Synchrotron (DESY) and Gesellschaft fuer Schwerionenforschung (GSI) - supports with its members' supercomputer facilities about 130 research groups at universities and national labs working on computer simulations in various fields of science. Fifteen invited lectures covered selected topics in the following fields: Astrophysics Biophysics Chemistry Elementary Particle Physics Condensed Matter Materials Science Soft Matter Science Environmental Research Hydrodynamics and turbulence Plasma Physics Computer Science The talks are intended to inform a broad audience of scientists and the interested public about the research activities at NIC. The proceedings of the symposium cover projects that have been supported by the IBM supercomputers JUMP and IBM Blue Gene/P in Juelich and the APE topical computer at DESY-Zeuthen in an even wider range than the lectures.

Prof. Manfred Popp, Chairman of the Executive Board, Forschungszentrum Karlsruhe GmbH

CERN Multimedia

Patrice Loïez

2003-01-01

Prof. Popp is pictured here in the ATLAS detector assembly hall with Dr. Horst Wenninger of CERN.Photo 01: Prof. Popp (right) and Dr. Wenninger in front of one of the two vacuum vessels for the ATLAS end-cap toroid magnets.Photo 02: Prof. Popp (right) and Dr. Wenninger in front of one of eight 25-metre-long aluminium-alloy coil casings that will house the racetrack coils of the barrel toroid magnet system.

Research center Juelich to install Germany's most powerful supercomputer new IBM System for science and research will achieve 5.8 trillion computations per second

CERN Multimedia

2002-01-01

"The Research Center Juelich, Germany, and IBM today announced that they have signed a contract for the delivery and installation of a new IBM supercomputer at the Central Institute for Applied Mathematics" (1/2 page).

Constrained minimization in C ++ environment

International Nuclear Information System (INIS)

Dymov, S.N.; Kurbatov, V.S.; Silin, I.N.; Yashchenko, S.V.

1998-01-01

Based on the ideas, proposed by one of the authors (I.N.Silin), the suitable software was developed for constrained data fitting. Constraints may be of the arbitrary type: equalities and inequalities. The simplest of possible ways was used. Widely known program FUMILI was realized to the C ++ language. Constraints in the form of inequalities φ (θ i ) ≥ a were taken into account by change into equalities φ (θ i ) = t and simple inequalities of type t ≥ a. The equalities were taken into account by means of quadratic penalty functions. The suitable software was tested on the model data of the ANKE setup (COSY accelerator, Forschungszentrum Juelich, Germany)

Cross section ratio and angular distributions of the reaction p + d → {sup 3}He + η at 48.8 MeV and 59.8 MeV excess energy

Energy Technology Data Exchange (ETDEWEB)

Adlarson, P.; Calen, H.; Fransson, K.; Gullstroem, C.O.; Heijkenskjoeld, L.; Hoeistad, B.; Johansson, T.; Marciniewski, P.; Redmer, C.F.; Wolke, M.; Zlomanczuk, J. [Uppsala University, Division of Nuclear Physics, Department of Physics and Astronomy, Box 516, Uppsala (Sweden); Augustyniak, W.; Marianski, B.; Morsch, H.P.; Trzcinski, A.; Zupranski, P. [National Centre for Nuclear Research, Department of Nuclear Physics, Warsaw (Poland); Bardan, W.; Ciepal, I.; Czerwinski, E.; Hodana, M.; Jany, A.; Jany, B.R.; Jarczyk, L.; Kamys, B.; Kistryn, S.; Krzemien, W.; Magiera, A.; Moskal, P.; Ozerianska, I.; Podkopal, P.; Rudy, Z.; Skurzok, M.; Smyrski, J.; Wronska, A.; Zielinski, M.J. [Jagiellonian University, Institute of Physics, Krakow (Poland); Bashkanov, M.; Clement, H.; Doroshkevich, E.; Perez del Rio, E.; Pricking, A.; Skorodko, T.; Wagner, G.J. [Eberhard-Karls-Universitaet Tuebingen, Physikalisches Institut, Tuebingen (Germany); Physikalisches Institut der Universitaet Tuebingen, Kepler Center fuer Astro- und Teilchenphysik, Tuebingen (Germany); Bergmann, F.S.; Demmich, K.; Goslawski, P.; Huesken, N.; Khoukaz, A.; Passfeld, A.; Taeschner, A. [Westfaelische Wilhelms-Universitaet Muenster, Institut fuer Kernphysik, Muenster (Germany); Berlowski, M.; Stepaniak, J. [National Centre for Nuclear Research, High Energy Physics Department, Warsaw (Poland); Bhatt, H.; Lalwani, K.; Varma, R. [Indian Institute of Technology Bombay, Department of Physics, Mumbai, Maharashtra (India); Buescher, M.; Engels, R.; Goldenbaum, F.; Hejny, V.; Khan, F.A.; Lersch, D.; Lorentz, B.; Maier, R.; Ohm, H.; Prasuhn, D.; Schadmand, S.; Sefzick, T.; Stassen, R.; Sterzenbach, G.; Stockhorst, H.; Stroeher, H.; Wurm, P.; Zurek, M. [Forschungszentrum Juelich, Institut fuer Kernphysik, Juelich (Germany); Forschungszentrum Juelich, Juelich Center for Hadron Physics, Juelich (Germany); Coderre, D.; Ritman, J. [Forschungszentrum Juelich, Institut fuer Kernphysik, Juelich (Germany); Forschungszentrum Juelich, Juelich Center for Hadron Physics, Juelich (Germany); Ruhr-Universitaet Bochum, Institut fuer Experimentalphysik I, Bochum (Germany); Erven, A.; Erven, W.; Kemmerling, G.; Kleines, H.; Wuestner, P. [Forschungszentrum Juelich, Juelich Center for Hadron Physics, Juelich (Germany); Forschungszentrum Juelich, Zentralinstitut fuer Engineering, Elektronik und Analytik, Juelich (Germany); Eyrich, W.; Hauenstein, F.; Krapp, M.; Zink, A. [Friedrich-Alexander-Universitaet Erlangen-Nuernberg, Physikalisches Institut, Erlangen (Germany); Fedorets, P. [Forschungszentrum Juelich, Institut fuer Kernphysik, Juelich (Germany); Forschungszentrum Juelich, Juelich Center for Hadron Physics, Juelich (Germany); State Scientific Center of the Russian Federation, Institute for Theoretical and Experimental Physics, Moscow (Russian Federation); Foehl, K. [Justus-Liebig-Universitaet Giessen, II. Physikalisches Institut, Giessen (Germany); Goswami, A. [Forschungszentrum Juelich, Institut fuer Kernphysik, Juelich (Germany); Forschungszentrum Juelich, Juelich Center for Hadron Physics, Juelich (Germany); Indian Institute of Technology Indore, Department of Physics, Indore, Madhya Pradesh (India); Grigoryev, K. [Forschungszentrum Juelich, Juelich Center for Hadron Physics, Juelich (Germany); RWTH Aachen, III. Physikalisches Institut B, Physikzentrum, Aachen (Germany); Petersburg Nuclear Physics Institute, High Energy Physics Division, Leningrad district (Russian Federation); Kirillov, D.A.; Piskunov, N.M. [Joint Institute for Nuclear Physics, Veksler and Baldin Laboratory of High Energiy Physics, Moscow region (Russian Federation); Klos, B.; Stephan, E.; Weglorz, W. [University of Silesia, August Chelkowski Institute of Physics, Katowice (Poland); Kulessa, P.; Pysz, K.; Siudak, R.; Szczurek, A. [Polish Academy of Sciences, The Henryk Niewodniczanski Institute of Nuclear Physics, Krakow (Poland); Kupsc, A.; Pszczel, D. [Uppsala University, Division of Nuclear Physics, Department of Physics and Astronomy, Box 516, Uppsala (Sweden); National Centre for Nuclear Research, High Energy Physics Department, Warsaw (Poland); Mikirtychiants, M. [Forschungszentrum Juelich, Institut fuer Kernphysik, Juelich (Germany); Forschungszentrum Juelich, Juelich Center for Hadron Physics, Juelich (DE); Ruhr-Universitaet Bochum, Institut fuer Experimentalphysik I, Bochum (DE); Petersburg Nuclear Physics Institute, High Energy Physics Division, Leningrad district (RU); Pyszniak, A. [Uppsala University, Division of Nuclear Physics, Department of Physics and Astronomy, Box 516, Uppsala (SE); Jagiellonian University, Institute of Physics, Krakow (PL); Roy, A. [Indian Institute of Technology Indore, Department of Physics, Indore, Madhya Pradesh (IN); Sawant, S. [Indian Institute of Technology Bombay, Department of Physics, Mumbai, Maharashtra (IN); Forschungszentrum Juelich, Institut fuer Kernphysik, Juelich (DE); Forschungszentrum Juelich, Juelich Center for Hadron Physics, Juelich (DE); Serdyuk, V. [Forschungszentrum Juelich, Institut fuer Kernphysik, Juelich (DE); Forschungszentrum Juelich, Juelich Center for Hadron Physics, Juelich (DE); Joint Institute for Nuclear Physics, Dzhelepov Laboratory of Nuclear Problems, Moscow region (RU); Sopov, V. [State Scientific Center of the Russian Federation, Institute for Theoretical and Experimental Physics, Moscow (RU); Yamamoto, A. [High Energy Accelerator Research Organization KEK, Tsukuba, Ibaraki (JP); Yurev, L. [Joint Institute for Nuclear Physics, Dzhelepov Laboratory of Nuclear Problems, Moscow region (RU); Zabierowski, J. [National Centre for Nuclear Research, Department of Cosmic Ray Physics, Lodz (PL); Collaboration: WASA-at-COSY Collaboration

2014-06-15

We present new data for angular distributions and on the cross section ratio of the p+d → {sup 3}He + η reaction at excess energies of Q = 48.8 MeV and Q = 59.8 MeV. The data have been obtained at the WASA-at-COSY experiment (Forschungszentrum Juelich) using a proton beam and a deuterium pellet target. While the shape of obtained angular distributions show only a slow variation with the energy, the new results indicate a distinct and unexpected total cross section fluctuation between Q = 20 MeV and Q = 60 MeV, which might indicate the variation of the production mechanism within this energy interval. (orig.)

Cross section ratio and angular distributions of the reaction p + d → 3He + η at 48.8 MeV and 59.8 MeV excess energy

International Nuclear Information System (INIS)

Adlarson, P.; Calen, H.; Fransson, K.; Gullstroem, C.O.; Heijkenskjoeld, L.; Hoeistad, B.; Johansson, T.; Marciniewski, P.; Redmer, C.F.; Wolke, M.; Zlomanczuk, J.; Augustyniak, W.; Marianski, B.; Morsch, H.P.; Trzcinski, A.; Zupranski, P.; Bardan, W.; Ciepal, I.; Czerwinski, E.; Hodana, M.; Jany, A.; Jany, B.R.; Jarczyk, L.; Kamys, B.; Kistryn, S.; Krzemien, W.; Magiera, A.; Moskal, P.; Ozerianska, I.; Podkopal, P.; Rudy, Z.; Skurzok, M.; Smyrski, J.; Wronska, A.; Zielinski, M.J.; Bashkanov, M.; Clement, H.; Doroshkevich, E.; Perez del Rio, E.; Pricking, A.; Skorodko, T.; Wagner, G.J.; Bergmann, F.S.; Demmich, K.; Goslawski, P.; Huesken, N.; Khoukaz, A.; Passfeld, A.; Taeschner, A.; Berlowski, M.; Stepaniak, J.; Bhatt, H.; Lalwani, K.; Varma, R.; Buescher, M.; Engels, R.; Goldenbaum, F.; Hejny, V.; Khan, F.A.; Lersch, D.; Lorentz, B.; Maier, R.; Ohm, H.; Prasuhn, D.; Schadmand, S.; Sefzick, T.; Stassen, R.; Sterzenbach, G.; Stockhorst, H.; Stroeher, H.; Wurm, P.; Zurek, M.; Coderre, D.; Ritman, J.; Erven, A.; Erven, W.; Kemmerling, G.; Kleines, H.; Wuestner, P.; Eyrich, W.; Hauenstein, F.; Krapp, M.; Zink, A.; Fedorets, P.; Foehl, K.; Goswami, A.; Grigoryev, K.; Kirillov, D.A.; Piskunov, N.M.; Klos, B.; Stephan, E.; Weglorz, W.; Kulessa, P.; Pysz, K.; Siudak, R.; Szczurek, A.; Kupsc, A.; Pszczel, D.; Mikirtychiants, M.; Pyszniak, A.; Roy, A.; Sawant, S.; Serdyuk, V.; Sopov, V.; Yamamoto, A.; Yurev, L.; Zabierowski, J.

2014-01-01

We present new data for angular distributions and on the cross section ratio of the p+d → 3 He + η reaction at excess energies of Q = 48.8 MeV and Q = 59.8 MeV. The data have been obtained at the WASA-at-COSY experiment (Forschungszentrum Juelich) using a proton beam and a deuterium pellet target. While the shape of obtained angular distributions show only a slow variation with the energy, the new results indicate a distinct and unexpected total cross section fluctuation between Q = 20 MeV and Q = 60 MeV, which might indicate the variation of the production mechanism within this energy interval. (orig.)

Research on transmutation and accelerator-driven systems at the Forschungszentrum Karlsruhe

International Nuclear Information System (INIS)

Knebel, J.U.; Heusener, G.

2000-01-01

Transmutation is considered a promising technology worldwide for significantly reducing the amount and, thereby, the long-term radiotoxicity of high active waste (HAW) produced by the operation of nuclear power plants such as light water reactors (LWR). The maximum reduction of radiotoxicity could be by a factor of about 100. Transmutation is thus an alternative to the direct deposition of large volumes of highly radioactive waste. Transmutation presents the possibility of closing the fuel cycle including the minor actinides. Plutonium, minor actinides and long-lived fission products can be transmuted in a so called Accelerator Driven Sub-critical System (ADS), which consists of an accelerator, a target module and a subcritical blanket. This paper describes the work performed at Forschungszentrum Karlsruhe which is critically evaluating an ADS mainly with respect to its potential for transmuting minor actinides, to its feasibility and to safety aspects. The work is being done in the area of core design, neutronics, safety, system analyses, materials and corrosion. (orig.) [de

Experiences with ATM in a multivendor pilot system at Forschungszentrum Julich

Science.gov (United States)

Kleines, H.; Ziemons, K.; Zwoll, K.

1998-08-01

The ATM technology for high speed serial transmission provides a new quality of communication by introducing novel features in a LAN environment, especially support of real time communication, of both LAN and WAN communication and of multimedia streams. In order to evaluate ATM for future DAQ systems and remote control systems as well as for a high speed picture archiving and communications system for medical images, Forschungszentrum Julich has build up a pilot system for the evaluation of ATM and standard low cost multimedia systems. It is a heterogeneous multivendor system containing a variety of switches and desktop solutions, employing different protocol options of ATM. The tests conducted in the pilot system revealed major difficulties regarding stability, interoperability and performance. The paper presents motivations, layout and results of the pilot system. Discussion of results concentrates on performance issues relevant for realistic applications, e.g., connection to a RAID system via NFS over ATM.

LACOMERA - large scale experiments on core degradation, melt retention and coolability at the Forschungszentrum Karslruhe

International Nuclear Information System (INIS)

Miassoedov, A.; Alsmeyer, H.; Meyer, L.

2003-01-01

The LACOMERA project at the Forschungszentrum Karlsruhe is a 3 year shared-cost action within the Fifth Framework Programme which started in September 2002. The overall objectives of the LACOMERA project are to provide research institutions from the EU member countries and associated states access to large scale experimental facilities at the Forschungszentrum Karlsruhe which shall be used to increase the knowledge of the quenching of a degraded core and regaining melt coolability in the reactor pressure vessel, of possible melt dispersion to the cavity, of molten core concrete interaction and of ex-vessel melt coolability. One major aspect is to understand how these events affect the safety of European reactors so as to lead to soundly-based accident management procedures. The project will bring together interested partners of different European member states in the area of severe accident analysis and control, with the goal to increase the public confidence in the use of nuclear energy. Moreover, partners from the newly associated states should be included as far as possible, and therefore the needs of Eastern, as well as Western, reactors will be considered in LACOMERA project. The project offers a unique opportunity to get involved in the networks and activities supporting VVER safety, and for Eastern experts to get an access to large scale experimental facilities in a Western research organisation to improve understanding of material properties and core behaviour under severe accident conditions. As a result of the first call for proposals a project on air ingress test in the QUENCH facility has been selected. A second call for proposals is opened with a deadline of 31 December 2003. (author)

First internal and external experiments at COSY Juelich

International Nuclear Information System (INIS)

Prasuhn, D.; Maier, R.; Bechstedt, U.; Dietrich, J.; Hacker, U.; Martin, S.; Stockhorst, H.; Toelle, R.; Grzonka, D.; Nake, C.; Mosel, F.

1995-01-01

The inauguration of the cooler synchrotron COSY Juelich was celebrated on April 1st, 1993. After the first successful acceleration to proton momenta above 800 GeV/c, beamtimes for experiments were scheduled in parallel to further machine development. The first experiment was the internal target experiment EDDA, which investigated the energy dependence of the p-p interaction. It makes use of a 3x4 μm 2 thin CH 2 fiber as an internal target. The thickness of the fiber is more than adequate to achieve high luminosities, so the intensity of the stored beam has to be reduced to 10 7 p. On the other hand, it is thin enough to achieve beam lifetimes of 3 s at 1.4 GeV/c. Details of the target fabrication and the first experimental results will be discussed. Both external experimental facilities at COSY, the time-of-flight spectrometer, and the magnetic spectrometer BIG KARL use a liquid hydrogen (deuterium) target. The first experiments were carried out at proton energies between 300 MeV and 500 MeV. Also, these experimental data will be presented. Two further internal experiments are prepared for the installation into the COSY ring. The target for the first experiment is a gas-jet target, the second experiment uses ribbon targets for the interaction. The status of both experimental setups will be shown. (orig.)

Association EURATOM-FZJ. Annual progress report 2013. SC-FZJ-92-(14)-4.1.3

International Nuclear Information System (INIS)

2013-01-01

The Helmholtz Association's (HGF) fusion activities are in line with the European fusion re-search programme. The following Helmholtz Centres are involved: Max Planck Institute of Plasma Physics (IPP, Garching and Greifswald), Karlsruhe Institute of Technology (KIT), and Forschungszentrum Juelich (FZJ). This report presents results having been achieved by FZJ during the final year of the Association (2013). Forschungszentrum Juelich coordinates its fusion research activities within several institutes and is well embedded into the European fusion research structures, the work programme of which is oriented along the European Road Map for the Realization of Fusion Electricity. The major part of the Juelich research activities is located within the Institute of Energy and Climate Research (IEK). This is organized along a number of institute parts, among which fusion research is concentrated within IEK-Plasma Physics and IEK-Microstructure and Properties of Materials. The IEK-Plasma Physics has the largest share of scientific staff in physics and technology for fusion, operated the TEXTOR tokamak, performs scientific work on JET and DIII-D, supports the Wendelstein 7-X construction and takes up significant projects related to the development of ITER. The appointment in 2012 of a new second director at IEK-4 (Prof. Linsmeier) strengthens in particular the materials science expertise within the Juelich fusion programme. This will complement the activities which are based on the operation of the high heat flux test facilities JUDITH 1 and 2. They are installed inside a Hot Cell and in a controlled area which are licensed for operating with toxic and radiating materials. The Association EURATOM-FZJ has very close contacts to the neighbouring EURATOM associations in Belgium and The Netherlands. In 1996 together they have founded the Trilateral Euregio Cluster (TEC) which provides a clustering of resources in order to perform a co-ordinated R and D programme, to operate

Association EURATOM-FZJ. Annual progress report 2013. SC-FZJ-92-(14)-4.1.3

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-07-01

The Helmholtz Association's (HGF) fusion activities are in line with the European fusion re-search programme. The following Helmholtz Centres are involved: Max Planck Institute of Plasma Physics (IPP, Garching and Greifswald), Karlsruhe Institute of Technology (KIT), and Forschungszentrum Juelich (FZJ). This report presents results having been achieved by FZJ during the final year of the Association (2013). Forschungszentrum Juelich coordinates its fusion research activities within several institutes and is well embedded into the European fusion research structures, the work programme of which is oriented along the European Road Map for the Realization of Fusion Electricity. The major part of the Juelich research activities is located within the Institute of Energy and Climate Research (IEK). This is organized along a number of institute parts, among which fusion research is concentrated within IEK-Plasma Physics and IEK-Microstructure and Properties of Materials. The IEK-Plasma Physics has the largest share of scientific staff in physics and technology for fusion, operated the TEXTOR tokamak, performs scientific work on JET and DIII-D, supports the Wendelstein 7-X construction and takes up significant projects related to the development of ITER. The appointment in 2012 of a new second director at IEK-4 (Prof. Linsmeier) strengthens in particular the materials science expertise within the Juelich fusion programme. This will complement the activities which are based on the operation of the high heat flux test facilities JUDITH 1 and 2. They are installed inside a Hot Cell and in a controlled area which are licensed for operating with toxic and radiating materials. The Association EURATOM-FZJ has very close contacts to the neighbouring EURATOM associations in Belgium and The Netherlands. In 1996 together they have founded the Trilateral Euregio Cluster (TEC) which provides a clustering of resources in order to perform a co-ordinated R and D programme, to operate

(Fuel, fission product, and graphite technology)

Energy Technology Data Exchange (ETDEWEB)

Stansfield, O.M.

1990-07-25

Travel to the Forschungszentrum (KFA) -- Juelich described in this report was for the purpose of participating in the annual meeting of subprogram managers for the US/DOE Umbrella Agreement for Fuel, Fission Product, and Graphite Technology. At this meeting the highlights of the cooperative exchange were reviewed for the time period June 1989 through June 1990. The program continues to contribute technology in an effective way for both countries. Revision 15 of the Subprogram Plan will be issued as a result of the meeting. There was interest expressed by KFA management in the level of support received from the NPR program and in potential participation in the COMEDIE loop experiment being conducted at the CEA.

Production and characterization of monodisperse uranium particles for nuclear safeguards applications

International Nuclear Information System (INIS)

Knott, Alexander

2016-01-01

Environmental sampling is a very effective measure to detect undeclared nuclear activities. Generally, samples are taken as swipe samples on cotton. These swipes contain minute quantities of particulates which have an inherent signature of their production and release scenario. These inspection samples are assessed for their morphology, elemental composition and their isotopic vectors. Mass spectrometry plays a crucial role in determining the isotopic ratios of uranium. Method validation and instrument calibration with well-characterized quality control (QC)-materials, reference materials (RMs) and certified reference materials (CRMs) ensures reliable data output. Currently, the availability of suitable well defined microparticles containing uranium and plutonium reference materials is very limited. Primarily, metals, oxides and various uranium and plutonium containing solutions are commercially available. Therefore, the IAEA's Safeguards Analytical Services (SGAS) cooperates with the Institute of Nuclear Waste Management and Reactor Safety (IEK-6) at the Forschungszentrum Juelich GmbH in a joint task entitled ''Production of Particle Reference Materials''. The work presented in this thesis has been partially funded by the IAEA, Forschungszentrum Juelich GmbH and the Federal Ministry of Economic Affairs and Energy (BMWi) through the ''Joint Program on the Technical Development and Further Improvement of IAEA Safeguards between the Government of the Federal Republic of Germany and the IAEA''. The first step towards monodisperse microparticles was the development of pure uranium oxide particles made from certified reference materials. The focus of the dissertation is (1) the implementation of a working setup to produce monodisperse uranium oxide particles and (2) the characterization of these particles towards the application as QC-material. Monodisperse uranium oxide particles were produced by spray pyrolysis. It was demonstrated that the particle size can be

Production and characterization of monodisperse uranium particles for nuclear safeguards applications

Energy Technology Data Exchange (ETDEWEB)

Knott, Alexander

2016-07-01

Environmental sampling is a very effective measure to detect undeclared nuclear activities. Generally, samples are taken as swipe samples on cotton. These swipes contain minute quantities of particulates which have an inherent signature of their production and release scenario. These inspection samples are assessed for their morphology, elemental composition and their isotopic vectors. Mass spectrometry plays a crucial role in determining the isotopic ratios of uranium. Method validation and instrument calibration with well-characterized quality control (QC)-materials, reference materials (RMs) and certified reference materials (CRMs) ensures reliable data output. Currently, the availability of suitable well defined microparticles containing uranium and plutonium reference materials is very limited. Primarily, metals, oxides and various uranium and plutonium containing solutions are commercially available. Therefore, the IAEA's Safeguards Analytical Services (SGAS) cooperates with the Institute of Nuclear Waste Management and Reactor Safety (IEK-6) at the Forschungszentrum Juelich GmbH in a joint task entitled ''Production of Particle Reference Materials''. The work presented in this thesis has been partially funded by the IAEA, Forschungszentrum Juelich GmbH and the Federal Ministry of Economic Affairs and Energy (BMWi) through the ''Joint Program on the Technical Development and Further Improvement of IAEA Safeguards between the Government of the Federal Republic of Germany and the IAEA''. The first step towards monodisperse microparticles was the development of pure uranium oxide particles made from certified reference materials. The focus of the dissertation is (1) the implementation of a working setup to produce monodisperse uranium oxide particles and (2) the characterization of these particles towards the application as QC-material. Monodisperse uranium oxide particles were produced by spray pyrolysis. It was

Models and criteria for prediction of Deflagration-to-Detonation Transition (DDT) in hydrogen-air-steam systems under severe accident conditions. Final report

International Nuclear Information System (INIS)

Klein, R.; Rehm, W.

1999-01-01

The European Commission in Brussels supported a joint project on Deflagration-to-Detonation Transition (DDT) studies for hydrogen safety within the framework programme on nuclear fission safety. The project was initiated by the Forschungszentrum Juelich based on the results of a pilot project. The following main project was coordinated by the Freie Universitaet Berlin involving seven european partners. The partners came from universities, research centers and industry, as follows: FU-Berlin, RWTH-Aachen, CNRS-Marseille, IPSN-Saclay, FZ-Juelich, FZ-Karlsruhe, and NNC-Knutsford, which worked closely together. The working period was two years (1997-1998). The aim of the project was to develop models and criteria for prediction of deflagration-to-detonation transition (DDT) in hydrogen-air-steam systems under severe accident conditions. The results obtained are documented in this final report, which was finished in 1999. The report consists of seven chapters, concerning: - Introduction - Experimental Investigations - Modelling and Numerics - Validation - Mitigation - Further Deliverables - Summary and Conclusion. The final report presents special experimental, theoretical, and computational aspects of the complex DDT phenomena for hydrogen safety studies, and it should be a solid basis for end user applications and further developments. (orig.)

Special neutron measurement results from the spectral positions of the Juelich FKS steel irradiation capsules

International Nuclear Information System (INIS)

Schneider, W.; Kuepper, H.; Pott, G.; Borchardt, G.; Segelhorst, G.; Thoene, L.; Weise, L.

1986-10-01

For the German project 'Forschungsvorhaben Komponentensicherheit' (FKS, i.e., Structural Integrity of Components) steel specimen irradiations have been carried out in the Juelich Merlin-type reactor (FRJ-1). The neutron monitoring to these irradiations is described in a German report (Juel-2087). In this context, some special considerations and results are given here, i.e., an experimental investigation of the fast neutron spectrum variation over a thick steel plate (in a special dosimetry test experiment); a comparison of the outcome of this investigation with the results from other FKS participants; and finally, the evaluation of the neutron exposure expressed in displacements per atom (dpa) in the centre of that steel plate. (orig.)

Conceptual design of a rapid-cycling synchrotron for the KFA-Juelich spallation neutron source: working papers

International Nuclear Information System (INIS)

1983-01-01

An accelerator group was established at ANL by the request of KFA-Juelich to carry out a conceptual design study and cost estimate for a rapid-cycling synchrotron as a possible first stage program on spallation neutron sources at KFA-Juelich. This set of notes is the individual notes which form the basis of the final report under this proposal prepared in January 1983. The topics covered include: SNQ Synchrotron Lattice-I; injection and extraction orbit; extraction from SNQ-SRA; SRA injection; capture and acceleration considerations in the SNQ-SRA; longitudinal coupling impedance; power supplies for SNQ synchrotron proposals; space charge limits in the SNQ-SRA; error analysis; SNQ-SRA ring magnets preliminary designs and cost; summary of CERN booster 4-ring arrangement; V-lattices for SNQ-SRA and extraction from the V-lattices; rf parameters for capture, acceleration and extraction; some parameters of the SNQ-SRA injector system; Keil-Schnell criterion; risetime of longitudinal resistive wall instability; beam scrapers; a design of the vacuum system; some aspects of vacuum consideration for SNQ-SRA; choice working points; ring magnet power supplies for shaped extaction of 1.1 GeV SNQ; ring magnet design and costs; tune shift due to the fringing field of the quadrupoles; coherent instability due to ions in the residual gas; transverse stabilization of bunched beams; rf acceleration system; injection into the SRA; Landau damping to get transverse stability; chromaticity and amplitude dependent tune controls in the SNQ-SRA; conversion of the SNQ-SRA to a compressor ring; comments on beam loss; summary of longitudinal stability study and transverse stability study for the SNQ-SRA; and the beam stay clear regions of the SNQ-SRA

Association EURATOM-FZJ. Annual progress report 2012. SC-FZJ 90(13)/4.1.2

International Nuclear Information System (INIS)

2012-01-01

The Helmholtz Association's (HGF) fusion activities are in line with the European fusion re-search programme. The following Helmholtz Centres are involved: Max Planck Institute of Plasma Physics (IPP, Garching and Greifswald), Karlsruhe Institute of Technology (KIT), and Forschungszentrum Juelich (FZJ). This report presents results having been achieved by FZJ in the year 2012. Forschungszentrum Juelich as a EURATOM Association coordinates its fusion research activities within the Nuclear Fusion Project (KFS). The programme is based on several institutes and is well embedded into the European fusion research structure. The major part of the Juelich research activities is located within the Institute of Energy and Climate Research (IEK). This is organized along a number of institute parts, among which fusion research is concentrated within IEK-4 Plasma Physics and IEK-2 Microstructure and Properties of Materials. The IEK-4 Plasma Physics has the largest share of scientific staff in physics and technology for fusion, operates the TEXTOR tokamak, performs scientific work on JET and DIII-D, supports the Wendelstein 7-X construction and takes up significant projects related to the development of ITER. With the recent appointment of a new second director at IEK-4 (Prof. Linsmeier) it is intended to enhance the materials science expertise within the Juelich fusion programme and in particular in IEK-4: This will complement the activities in IEK-2, which operates the high heat flux test facilities JUDITH 1 and 2. They are installed inside a Hot Cell and in a controlled area which is licensed to operate with toxic and radiating materials. The Central Technology Division (ZEA1) provides engineering expertise and specialised workshop capacities. The Juelich Supercomputing Centre (JSC) operates various types of super-computer systems, among which one device (HPC-FF) is dedicated exclusively to fusion research within EFDA. The Association EURATOM-FZJ has very close contacts

First internal and external experiments at COSY Juelich

Energy Technology Data Exchange (ETDEWEB)

Prasuhn, D [Forschungszentrum Juelich GmbH (Germany). Inst. fuer Kernphysik; Maier, R [Forschungszentrum Juelich GmbH (Germany). Inst. fuer Kernphysik; Bechstedt, U [Forschungszentrum Juelich GmbH (Germany). Inst. fuer Kernphysik; Dietrich, J [Forschungszentrum Juelich GmbH (Germany). Inst. fuer Kernphysik; Hacker, U [Forschungszentrum Juelich GmbH (Germany). Inst. fuer Kernphysik; Martin, S [Forschungszentrum Juelich GmbH (Germany). Inst. fuer Kernphysik; Stockhorst, H [Forschungszentrum Juelich GmbH (Germany). Inst. fuer Kernphysik; Toelle, R [Forschungszentrum Juelich GmbH (Germany). Inst. fuer Kernphysik; Grzonka, D [Forschungszentrum Juelich GmbH (Germany). Inst. fuer Kernphysik; Nake, C [Forschungszentrum Juelich GmbH (Germany). Inst. fuer Kernphysik; Mosel, F [Bonn Univ. (Germany). Inst. fuer Strahlen- und Kernphysik

1995-08-01

The inauguration of the cooler synchrotron COSY Juelich was celebrated on April 1st, 1993. After the first successful acceleration to proton momenta above 800 GeV/c, beamtimes for experiments were scheduled in parallel to further machine development. The first experiment was the internal target experiment EDDA, which investigated the energy dependence of the p-p interaction. It makes use of a 3x4 {mu}m{sup 2} thin CH{sub 2} fiber as an internal target. The thickness of the fiber is more than adequate to achieve high luminosities, so the intensity of the stored beam has to be reduced to 10{sup 7} p. On the other hand, it is thin enough to achieve beam lifetimes of 3 s at 1.4 GeV/c. Details of the target fabrication and the first experimental results will be discussed. Both external experimental facilities at COSY, the time-of-flight spectrometer, and the magnetic spectrometer BIG KARL use a liquid hydrogen (deuterium) target. The first experiments were carried out at proton energies between 300 MeV and 500 MeV. Also, these experimental data will be presented. Two further internal experiments are prepared for the installation into the COSY ring. The target for the first experiment is a gas-jet target, the second experiment uses ribbon targets for the interaction. The status of both experimental setups will be shown. (orig.).

Siempelkamp Nukleartechnik GmbH

International Nuclear Information System (INIS)

2011-01-01

Siempelkamp Nukleartechnik GmbH, which is headquartered in Krefeld (Germany), is at the forefront of the nuclear technology companies in the Siempelkamp group. With over 2,700 employees, Siempelkamp is a traditional family enterprise, and its individual divisions represent it as an internationally active industrial supplier in the markets of machinery and plants, nuclear technology, and foundry technology. (orig.)

Results of neutron measurements in the spectral position of the Juelich FKS steel irradiation capsules

International Nuclear Information System (INIS)

Schneider, W.

1986-10-01

This is a report on the planning and results of neutron monitoring in the capsules of the Juelich steel irradiation for the research project on component safety (FKS). The table of results and their discussion is provided specifically for the spectral positions (for characterising the neutron spectrum) in each of the types of irradiation capsules used. The results are given for the reaction rates of the neutron measurement reactions used (activation or fission reactions), for the neutron flux densities and fluxes derived from them related to the actual or at least plausible neutron spectra and finally for the radiation damage (or exposure) of the irradiated material calculated from them, expressed as the atomic displacement figure (dpa) and its percentage in sections of the neutron spectrum. (orig.) [de

Fission product retention in TRISO coated UO2 particle fuels subjected to HTR simulated core heating tests

International Nuclear Information System (INIS)

Baldwin, C.A.; Kania, M.J.

1991-01-01

Results of the examination and analysis of 25,730 individual microspheres from spherical fuel elements HFR-K3/1 and HFR-K3/3 are reported. The parent spheres were irradiated in excess of end-of-life exposure and subsequently subjected to simulated core heating tests in a special high-temperature furnace at Forschungszentrum, Juelich, GmbH (KFA). Following the heating tests, the spheres were electrolytically deconsolidated to obtain unbounded fuel particles for Irradiated Microsphere Gamma Analyzer (IMGA) analysis. For sphere HFR-K3/1, which was heated for 500 h at 1600 deg. C, only four particles were identified as having released fission products. The remaining particles from the sphere showed no statistical evidence of fission product release. Scanning Electron Microscopy (SEM) examination showed that three of the defect particles had large sections of the TRISO coating missing, while the fourth appeared normal. For sphere HFR-K3/3, which was heated for 100 h at 1800 deg. C, the IMGA data revealed that fission product release (cesium) from individual particles was significant and that there was large particle-to-particle variation in retention capabilities. Individual particle release (cesium) averaged ten times the KFA-measured integral spherical fuel element release value. In addition, the bimodal distribution of the individual particle data indicated that two distinct modes of failure at fuel temperatures of 1800 deg. C and above may exist. (author). 6 refs, 6 figs, 4 tabs

Fission product retention in TRISCO coated UO2 particle fuels subjected to HTR simulated core heating tests

International Nuclear Information System (INIS)

Baldwin, C.A.; Kania, M.J.

1990-11-01

Results of the examination and analysis of 25,730 individual microspheres from spherical fuel elements HFR-K3/1 and HFR-K3/3 are reported. The parent spheres were irradiated in excess of end-of-life exposure and subsequently subjected to simulated core heating tests in a special high-temperature furnace at Forschungszentrum, Juelich, GmbH (KFA). Following the heating tests, the spheres were electrolytically deconsolidated to obtain unbonded fuel particles for Irradiated Microsphere Gamma Analyzer (IMGA) analysis. For sphere HFR-K3/1, which was heated for 500 h at 1600 degree C, only four particles were identified as having released fission products. The remaining particles from the sphere showed no statistical evidence of fission product release. Scanning Electron Microscopy (SEM) examination showed that three of the defect particles had large sections of the TRISO coating missing, while the fourth appeared normal. For sphere HFR-K3/3, which was heated for 100 h at 1800 degree C, the IMGA data revealed that fission product release (cesium) from individual particles was significant and that there was large particle-to-particle variation in retention capabilities. Individual particle release (cesium) averaged ten times the KFA-measured integral spherical fuel element release value. In addition, the bimodal distribution of the individual particle data indicated that two distinct modes of failure at fuel temperatures of 1800 degree C and above may exist. 6 refs., 6 figs., 4 tabs

Iodine-123 and bromine-75 production and development program at Juelich

International Nuclear Information System (INIS)

Stoecklin, G.

1985-01-01

The iodine-123 and bromine-75 production and development program at the Nuclear Research Center in Juelich as of 1982 is described, and examples of recent 123 I- and 75 Br-analogue tracers that have been developed to the level of clinical trial are given. Iodine-123 is produced via the 127 I(d,6n) 123 Xe → 123 I process and by the 124 Te(p,2n) 123 I and 122 Te(d,n) 123 I reactions. These production methods are critically reviewed. Bromine-75-labeled benzodiazenes have been prepared for in vivo mapping of benzodiazepine receptor sites. The 7-( 75 Br)-5-(2-fluorophenyl)-1-methyl-1,3-dihydro-2H-1,4-benzodiazepine-2-one (BFB) was prepared with a specific activity of > 10 4 Ci/mmole. Finally, preparation and applications of the halogenated amino acid L-3-( 123 I)-iodo-α-methyltyrosine (IMT) and the analogous 75 Br compound (BMT) are reported. Both IMT and BMT have been successfully applied for pancreas imaging and tomography, and IMT has been used for imaging both melanotic and amelanotic malignant melanoma of the eye

Design and construction of the HESR BPM prototype wire test bench at COSY, Forschungzentrum Juelich

Energy Technology Data Exchange (ETDEWEB)

Srinivasan, Sudharsan; Kamerdzhiev, Vsevolod; Boehme, Christian [Forschungszentrum Juelich GmbH (Germany)

2016-07-01

The Institute of Nuclear Physics 4(IKP-4), of the Research Center Juelich (FZJ), is in charge of building and commissioning the High Energy Storage Ring (HESR) within the international facility, Facility for Antiproton and Ion Research (FAIR) at Darmstadt. Beam Position Monitors (BPMs) are an essential instrument for any accelerator allowing operators to accurately monitor and control the accelerated beam. The demand for a BPM test bench will be showcased which will help to assess the design's ability to meet the system requirements. The weight is on the factors considered for the development of the initial test bench, its functional components, the metrology tests for ensuring positional measurement accuracy, and the design modifications from metrology investigations leading to the conceptual development of a new test bench.

A safeguards concept for the AVR fuel element storage areas at the KFA-Juelich

International Nuclear Information System (INIS)

Canty, M.J.; Buttler, R.

1980-11-01

The storage of spent AVR fuel in the KFA-Juelich has been discussed in relation to the obligations of the FRG under NPT. The present system of material accountancy and the associated procedures for physical inventory taking, while adequate from the operational standpoint, fall short of providing sufficient safequards for the fissile material involved. It is essential to complement existing controls by providing the safeguards authorities with the means of verifying the nuclear materials accountancy data of the storage facility operators. Due to the difficulties associated with the assay of irradiated fuel, the verification measurements must be carried out with the close cooperation of the operators. It was demonstrated that, given appropriate measuring devices, a high assurance for the non-diversion of a significant quantity can be obtained with an acceptable manpower effort. In this regard, the highly diluted form of the fissile material plays a favourable role. (orig.) [de

Six years of operational experience with a lead acid battery in the autonomous PV-hydrogen plant phoebus Juelich

Energy Technology Data Exchange (ETDEWEB)

Meurer, C.; Brocke, W.A.; Emonts, B.; Heuts, G.; Mai, H.; Croe, D. [Forschungszentrum Juelich GmbH, Juelich (Germany). Inst. for Materials and Processes in Energy Systems IWV-3

1999-07-01

A set of 110 lead acid battery cells with a capacity of 1380 Ah was operated for six years in the PV-hydrogen plant PHOEBUS Juelich under realistic consumer and solar conditions. The plant is controlled by an energy management system that is specially designed for the use of a battery combined with a hydrogen long-term storage. The energy management system uses the state of charge SOC, which is determined by measurements of the battery current using validated models of the gassing current and the equilibrium voltage. It was found that after six years of operation there is hardly any fading of battery capacity. (orig.)

Solarthermie 2000 - Partial programme 3: Solar district heat - solar campus Juelich, feasibility study of the seasonal heat storage; Solarthermie 2000, Teilprogramm 3: Solare Nahwaerme - Solar-Campus Juelich, Machbarkeitsuntersuchung des saisonalen Waermespeichers

Energy Technology Data Exchange (ETDEWEB)

Braxein, A. [Iwu - Ingenieurgesellschaft fuer Wasser und Umwelt mbH, Aachen (Germany); Spaete, F.; Repschlaeger, H. [Solar-Inst. Juelich (Germany); Friedel, J. [Stadtwerke Juelich (Germany)

1998-12-31

The heart of the solar-assisted district heating system for the solar campus Juelich is going to be a seasonal underground store with a capacity of 2,500 cubic metres, e.g. a rather small long-term storage. The aim of the project was to prove the technical and financial feasibility of the underground store by developing a building concept for the storage and to determine whether this concept was also suitable for larger storage facilities. The design of the floating lid and the suitability of various building materials were studied by means of a physical model. The resulting storage concept shows an underground storage pit whose shape is an inverted square pyramid base with a seal of double-layer PP-foil and a thermal insulation of pressure-resistant mineral wool in the upper part. The lid consists of 16 square walk-on floating containers with an edge length of 6.50 metres and a height of 1.0 metre each. Tests and calculations showed that the concept can be realised. The building costs for the small storage with a capacity of 2,500 cubic metres will amount to approx. DM 370 per cubic metre, costs for larger volumes of 25,000 cubic metres will amount to approx. DM 150 DM per cubic metre of water stored. (orig.) [Deutsch] Das Kernstueck der solargestuetzten Nahwaermeversorgung fuer den Solar-Campus Juelich soll ein 2500 m{sup 3} grosser, saisonaler Erdbeckenspeicher bilden, also ein relativ kleiner Langzeitspeicher. Ziel des Vorhabens war, die technische und finanzielle Machbarkeit des geplanten Erdbeckenspeichers durch ein baureifes Speicherkonzept nachzuweisen sowie die Uebertragbarkeit auf grosse saisonale Speicher gleicher Bauart zu untersuchen. Die konstruktive Ausbildung der schwimmenden Deckelkonstruktion sowie die Eignung verschiedener Baumaterialien wurden mit Hilfe eines physikalischen Modells untersucht. Das resultierende Speicherkonzept sieht einen Erdbeckenspeicher in Form eines umgedrehten, quadratischen Pyramidenstumpfes mit einer Abdichtung aus

Environmental remediation activities at WISMUT GmbH, Germany

International Nuclear Information System (INIS)

Saito, Hiroshi; Takahashi, Kuniaki; Miyasaka, Yasuhiko; Yamana, Hajimu

2007-01-01

The WISMUT GmbH has carried out environmental remediation activities since 1991 in former GDR (German Democratic Republic) to rehabilitate the environment and landscape which have been adversely affected by decades of unrestrained mining and processing of uranium ores. It is worthy of being mentioned especially that WISMUT GmbH's sites including waste rock dump, mill tailings pond, open pit mine and water treatment facilities with an area of 3,700ha have been rehabilitated practically and extensively, and these activities are planned to terminate in 2015 except for the water treatment. For safety assessment after remediation, the value of 1mSv/y (in excess of the background level) is applied to as an individual effective dose, from the recommendation of ICRP (International Commission on Radiological Protection). This report shows a summary of environmental remediation activities carried out by the WISMUT GmbH and related regulatory laws. (author)

Core Facility of the Juelich Observatory for Cloud Evolution (JOYCE - CF)

Science.gov (United States)

Beer, J.; Troemel, S.

2017-12-01

A multiple and holistic multi-sensor monitoring of clouds and precipitation processes is a challenging but promising task in the meteorological community. Instrument synergies offer detailed views in microphysical and dynamical developments of clouds. Since 2017 The the Juelich Observatory for Cloud Evolution (JOYCE) is transformed into a Core Facility (JOYCE - CF). JOYCE - CF offers multiple long-term remote sensing observations of the atmosphere, develops an easy access to all observations and invites scientists word wide to exploit the existing data base for their research but also to complement JOYCE-CF with additional long-term or campaign instrumentation. The major instrumentation contains a twin set of two polarimetric X-band radars, a microwave profiler, two cloud radars, an infrared spectrometer, a Doppler lidar and two ceilometers. JOYCE - CF offers easy and open access to database and high quality calibrated observations of all instruments. E.g. the two polarimetric X-band radars which are located in 50 km distance are calibrated using the self-consistency method, frequently repeated vertical pointing measurements as well as instrument synergy with co-located micro-rain radar and distrometer measurements. The presentation gives insights into calibration procedures, the standardized operation procedures and recent synergistic research exploiting our radars operating at three different frequencies.

VESPA. Behaviour of long-lived fission and activation products in the nearfield of a nuclear waste repository and the possibilities of their retention

Energy Technology Data Exchange (ETDEWEB)

Bischofer, Barbara; Hagemann, Sven [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH, Koeln (Germany); Altmaier, Marcus [Karlsruher Institut fuer Technologie (KIT) (Germany); and others

2016-06-15

The present document is the final report of the Joint Research Project VESPA (Behaviour of Long-lived Fission and Activation Products in the Near Field of a Nuclear Waste Repository and the Possibilities of Their Retention), started in July 2010 with a duration of four years. The following four institutions were collaborative Partners in VESPA: - Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH - Institut fuer Energie- und Klimaforschung, IEK-6: Nukleare Entsorgung und Reaktorsicherheit, Forschungszentrum Juelich (FZJ) - Institut fuer Ressourcenoekologie (IRE), Helmholtz-Zentrum Dresden-Rossendorf (HZDR) - Institut fuer Nukleare Entsorgung (INE), Karlsruher Institut fuer Technologie (KIT) VESPA was funded by the German Federal Ministry of Economics and Energy (BMWi) under the contract numbers 02 E 10770 (GRS), 02 E 10780 (FZJ-IEF-6), 02 E 10790 (HZDR-IRE), 02 E 10800 (KIT-INE).

Concept for calculating dose rates from activated groundwater at accelerator sites

CERN Document Server

Prolingheuer, N; Vanderborght, J; Schlögl, B; Nabbi, R; Moormann, R

Licensing of particle accelerators requires the proof that the groundwater outside of the site will not be significantly contaminated by activation products formed below accelerator and target. In order to reduce the effort for this proof, a site independent simplified but conservative method is under development. The conventional approach for calculation of activation of soil and groundwater is shortly described on example of a site close to Forschungszentrum Juelich, Germany. Additionally an updated overview of a data library for partition coefficients for relevant nuclides transported in the aquifer at the site is presented. The approximate model for transport of nuclides with ground water including exemplary results on nuclide concentrations outside of the site boundary and of resulting effective doses is described. Further applications and developments are finally outlined.

Online Business Strategy: Mazda Motor Europe GmbH

OpenAIRE

Peltokangas, Merja

2009-01-01

Mazda Motors is a japanese car manufacturer, founded in 1920. The headquarter is located in Hiroshima, Japan and the European headquarter is located in Leverkusen, Germany. The aim of this thesis is to investigate how Mazda Motor Europe GmbH could improve its accessory sales in the future and reach more young customers. Based on the research results Mazda Motor Europe GmbH can see how the main competitors are positioned in the market and consider its own strategy. In the theory part o...

Status of FRJ-2 refurbishment of tank pipes and essential results of aging analysis

International Nuclear Information System (INIS)

Hansen, G.; Thamm, G.; Thome, M.

1993-01-01

An aging evaluation program for FRJ-2 (DIDO) of the Forschungszentrum Juelich GmbH has been developed and is currently executed in cooperation with the licensing and regulatory and TUV experts in order to determine the overall life expectancy of the facility and to identify critical systems and components that need to be upgraded or refurbished for future safe reactor operation. In Phase A (completed) a so called master list of the FRJ-2 mechanical, electrical and structural components was compiled on a system-by system basis and the operational documentation with respect to regular inspections, maintenance, repair and unusual occurences was carefully examined. Critical components were selected and their ageing respectively life limiting mechanisms identified. In Phase (currently under way) special inspections, examinations and tests for critical systems/components are being elaborated, executed and evaluated. Current work is being concentrated on non replaceable components (e.g. reactor aluminium tank (RAT) and the connecting pipes to the primary cooling circuit, the reactor steel tank and pipe work inside the concrete reactor block). As a consequence of first results of the aging evaluation program and due to leaks in the weir and drain pipes of the RAT a repair/refurbishment program was set up for the Al-RAT pipes (risers, downcomers weir and drain pipes) and the steel guide tubes. Details of the r/r program which is in far progress and first essential results of the aging evaluation will be presented. The results achieved until today are encouraging with respect to safe reactor operation on short and medium term. (author)

Status of FRJ-2 Refurbishment of tank pipes and essential results of aging analysis

International Nuclear Information System (INIS)

Hansen, G.; Thamm, G.; Thome, M.

1994-01-01

An aging evaluation program for FRJ-2 (DIDO) of the Forschungszentrum Juelich GmbH has been developed and is currently executed in cooperation with the licensing and regulatory and TUEV experts in order to determine the overall life expectancy of the facility and to identify critical systems and components that need to be upgraded or refurbished for future safe reactor operation. In Phase A (completed) a so called master list of the FRJ-2 mechanical, electrical and structural components was compiled on a system-by system basis and the operational documentation with respect to regular inspections, maintenance, repair and unusual occurrences was carefully examined. Critical components were selected and their ageing respectively life limiting mechanisms identified. In Phase B (currently under way) special inspections, examinations and tests for critical systems/components are being elaborated, executed and evaluated. Current work is being concentrated on non replaceable components (e.g. reactor aluminium tank (RAT) and the connecting pipes to the primary cooling circuit, the reactor steel tank and pipe work inside the concrete reactor block). As a consequence of first results of the aging evaluation program and due to leaks in the weir and drain pipes of the RAT a repair/refurbishment program was set up for the Al-RAT pipes (risers, downcomers, weir and drain pipes) and the steel guide tubes. Details of the r/r program which is in far progress and first essential results of the aging evaluation will be presented. The results achieved until today are encouraging with respect to safe reactor operation on short and medium term. (J.P.N.)

List of scientific and technological reports of the Nuclear Research Center Juelich Jan. 1985 - March 1988. 2. ed.

International Nuclear Information System (INIS)

1988-01-01

This list of scientific and technological reports at first comprises some general publications such as abbreviations used in technical reports, annual report for 1984, 1985, 1986, the list of reports 1984 and 1985, surveys and inquiries on the population to the Chernobyl accident and on the scientific personnel of Juelich to the transfer of scientific knowledge to the public. - The other reports are concerned with the subjects mathematics - computer - cybernetics, general physics, atomic- and nuclear physics, solid state physics, materials, analytical chemistry, technology, reactor techniques, measuring techniques, biology, agriculture, questions of energy, medicine, environment, plasma physics and fusion reactor technology, physical chemistry, nuclear- and radiochemistry, chemical technology, electrotechniques - electronics, geosciences. Finally a register of the authors is added. (HK) [de

Summary of the contributions to reactor safety research commissioned by the Republic of Austria and done by the Forschungszentrum Seibersdorf from 1987 to 1990

International Nuclear Information System (INIS)

Sonneck, G.; Sdouz, G.

1991-09-01

In 1987 the Forschungszentrum Seibersdorf was commissioned by the Republic of Austria with the collaboration in the Nuclear Safety Research Index, the OECD-LOFT-Programme and the International Coordinated Assessment and Application Programme (ICAAP). This report summarises the work done from 1987 to 1990, mainly in the field of thermal hydraulics, fuel rod behaviour and source term. Besides some analyses for experiments done in loops based on BWRs and PWRs of western design the work concentrated on safety researchs for WWERS. (Authors)

Comparative assessment of condensation models for horizontal tubes

International Nuclear Information System (INIS)

Schaffrath, A.; Kruessenberg, A.K.; Lischke, W.; Gocht, U.; Fjodorow, A.

1999-01-01

The condensation in horizontal tubes plays an important role e.g. for the determination of the operation mode of horizontal steam generators of VVER reactors or passive safety systems for the next generation of nuclear power plants. Two different approaches (HOTKON and KONWAR) for modeling this process have been undertaken by Forschungszentrum Juelich (FZJ) and University for Applied Sciences Zittau/Goerlitz (HTWS) and implemented into the 1D-thermohydraulic code ATHLET, which is developed by the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH for the analysis of anticipated and abnormal transients in light water reactors. Although the improvements of the condensation models are developed for different applications (VVER steam generators - emergency condenser of the SWR1000) with strongly different operation conditions (e.g. the temperature difference over the tube wall in HORUS is up to 30 K and in NOKO up to 250 K, the heat flux density in HORUS is up to 40 kW/m 2 and in NOKO up to 1 GW/m 2 ) both models are now compared and assessed by Forschungszentrum Rossendorf FZR e.V. Therefore, post test calculations of selected HORUS experiments were performed with ATHLET/KONWAR and compared to existing ATHLET and ATHLET/HOTKON calculations of HTWS. It can be seen that the calculations with the extension KONWAR as well as HOTKON improve significantly the agreement between computational and experimental data. (orig.) [de

Association EURATOM-FZJ. Annual progress report 2010. Nuclear fusion project. SC-FZJ 86(11)/4.1.2

International Nuclear Information System (INIS)

Schorn, Ralph P.

2011-01-01

Forschungszentrum Juelich (FZJ) as a EURATOM Association coordinates its fusion research activities within the Nuclear Fusion Project (KFS). The programme is based on several institutes and is well embedded into the European fusion research structure, where FZJ is now focussing on the two topics ''plasma-wall interactions'' and ''ITER technology''. The major part of the Juelich research activities is located within the Institute of Energy and Climate Research (IEK). The former Institute for Plasma Physics (IPP, now IEK-4 Plasma Physics) has by far the largest share of scientific staff in physics and technology for fusion, operates the TEXTOR tokamak, performs scientific work on JET and DIII-D, supports the Wendelstein 7-X construc-tion and takes up significant projects related to the ITER development. IEK-2 (Microstructure and Properties of Materials) operates the high heat flux test facilities JUDITH 1 and 2 which are installed inside a hot cell and in a controlled area which is licensed to operate with toxic and radiating materials; this group represents the materials science expertise within the Juelich fusion programme. The Central Technology Division (ZAT) provides engineering expertise and specialised workshop capacities. The Juelich Supercomputing Centre (JSC) operates various types of supercomputer systems, among which one device (HPC-FF) is dedicated exclusively to fusion research within EFDA. The Association EURATOM-FZJ has very close contacts to the neighbouring EURATOM associations in Belgium and The Netherlands. In 1996 they together have founded the Trilateral Euregio Cluster (TEC) which provides a clustering of resources in order to perform a co-ordinated R and D programme, to operate or construct large facilities (TEXTOR, MAGNUM-PSI), to combine different kinds of expertise and to allow for the forming of a strong partner-ship as a consortium within the ITER construction phase. An updated TEC agreement with a

Contributions for the seventeenth biennial conference on carbon

International Nuclear Information System (INIS)

Delle, W.

1985-06-01

This report is the compilation of the papers prepared by KFA Juelich GmbH for the 17th Biennial Conference on Carbon. In the contributions, results are presented which were obtained from the application of carbon in the High Temperature Gas-Cooled Reactor and for the Spallation Neutron Source planned in the Federal Republic of Germany. (orig.) [de

First Ideas Towards the Super-Conducting Magnet Design for the HESR at FAIR

CERN Document Server

Eichhorn, Ralf; Gussen, Achim; Martin, Siegfried

2005-01-01

The Forschungszentrum Juelich has taken the leadership of a consortium being responsible for the design of the HESR going to be part of the FAIR project at GSI. The HESR is a 50 Tm storage ring for antiprotons, based on a super-conducting magnet technology. On basis of the RHIC Dipole D0 (3.6 T), the magnet design for the HESR has started recently. One key issue will be a very compact layout because of the rather short magnets (been 1.82 m for the dipoles and 0.5 m for the other magnets). This paper will present first ideas of the magnetic and cryogenic layout, give a status report on the achievements so far and discuss the need and possible solutions for a bent magnet with a radius of curvature of 13.2 m.

Energy. Supermaterial for solar cells, membranes against the global warming, energy conservation in the greenhouse; Energie. Supermaterial fuer Solarzellen, Membranen gegen die globale Erwaermung, Energiesparen im Treibhaus

Energy Technology Data Exchange (ETDEWEB)

Roegener, Wiebke; Frick, Frank; Tillemans, Axel; Stahl-Busse, Brigitte

2010-07-01

A kaleidoscope of pictures presents highlights from the research at the Forschungszentrum Juelich - from moving into a new computer era over the development of a detector for dangerous liquids up to a new method of treatment against tinnitus. The highlights of this brochure are: (a) An interview with he director of the Oak Ridge National Laboratory on the energy mix of the future; (b) Environment friendly power generation by means of fuel cells; (c) Transfer of knowledge from fusion experiments to greater plants using a supercomputer; (d) Development of powerful batteries for electrically powered cars by means of the know-how from fuel cell research; (e) Investigation of contacting used fuel elements with water; (f) Reduction if energy consumption in a greenhouse using a combination of glass and foils; (g) News on the energy research and environmental research.

78 FR 66666 - Airworthiness Directives; Diamond Aircraft Industries GmbH Airplanes

Science.gov (United States)

2013-11-06

...., Washington, DC 20590, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For service... Aircraft Industries GmbH has issued Mandatory Service Bulletin No. MSB 42NG-003/12; Mandatory Service... Accomplishment/ Instructions section of Diamond Aircraft Industries GmbH Mandatory Service Bulletin No. MSB 42NG...

78 FR 26241 - Airworthiness Directives; Diamond Aircraft Industries GmbH Powered Gliders

Science.gov (United States)

2013-05-06

... p.m., Monday through Friday, except Federal holidays. For service information identified in this AD... We reviewed Diamond Aircraft Industries GmbH Mandatory Service Bulletin MSB 36-108, dated February 28... Industries GmbH Mandatory Service Bulletin MSB 36-108 and Diamond Aircraft [[Page 26243

German repository engineering in international markets. DBE TECHNOLOGY GmbH success story

Energy Technology Data Exchange (ETDEWEB)

Berlepsch, Thilo v.; Krone, Juergen [DBE Technology GmbH, Peine (Germany); Biurrun, Enrique

2015-10-15

DBE TECHNOLOGY GmbH was founded in 2000 as a spin-off from the Technology and Development Division of DBE, the German Company for the Construction and Operation of Repositories for Wastes. Today, 15 years later, DBE TECHNOLOGY GmbH can draw upon a tremendous amount of experience and knowledge, which goes far beyond the planning and operation of Deep Geologic Repositories and the development of technologies for the disposal of radioactive waste. The capabilities of DBE TECHNOLOGY GmbH are presented by leading through its history, describing its roots and highlighting main projects the company has been involved in.

Papers about coated particles, graphitic and metallic materials for progressive high-temperature reactors at the Reactor Meeting 1978

International Nuclear Information System (INIS)

Rottmann, J.

1978-09-01

In the contributions, questions on the development, the radiation and the high-temperature behaviour and the characterization of fuel element particles are treated. Furthermore the resistance and radiation behaviour of graphitic materials are discussed. Finally, questions on the choice of high-temperature alloys for nuclear process heat facilities are discussed and the testing-equipment of the Nuclear Research Centre as well as first results of the long-time experiments are presented. The work was performed within the frame of the projects 'HTR-Fuel Element Cycle' and 'Prototype Nuclear Process Heat', which are sponsored by the Federal Ministry of Research and Technology of the Federal Republic of Germany and of the state of North-Rhine-Westfalia. Partner firms, who participate in the two projects are Gelsenberg AG, Gesellschaft fuer Hochtemperaturreaktor-Technik mbH, Hochtemperaturreaktor-Brennelement GmbH, Hochtemperatur-Reaktorbau GmbH, Kernforschungsanlage Juelich GmbH, NUKEM GmbH, SIGRI Elektrographit GmbH/Ringsdorff-Werke GmbH, Bergbauforschung GmbH und Rheinische Braunkohlenwerke AG. (orig./UA) [de

The German DEMO working group. Perspectives of a fusion power plant

International Nuclear Information System (INIS)

Hesch, Klaus

2013-01-01

Fusion development has many different challenges in the areas of plasma physics, fusion technologies, materials development and plasma wall interaction. For making fusion power a reality, a coherent approach is necessary, interlinking the different areas of work. To this end, the German fusion program started in 2010 the German DEMO Working Group, bringing together high-level experts from all the different fields, from the 3 German fusion centers Max-Planck-Institut fuer Plasmaphysik (IPP), Karlsruher Institut fuer Technologie (KIT) and Forschungszentrum Juelich (FZJ). An encompassing view of what will be needed with high priority, in plasma physics, in fusion technology and in the interrelation of the fields, to make fusion energy real, has been elaborated, and is presented here in a condensed way. On this basis, the 3 German fusion centers now are composing their work program, towards a fusion demonstration reactor DEMO. (orig.)

Theoretical and experimental studies of runaway electrons in the TEXTOR tokamak

International Nuclear Information System (INIS)

Abdullaev, S.S.; Finken, K.H.; Wongrach, K.; Willi, O.

2016-01-01

Theoretical and experimental studies of runaway electrons in tokamaks and their mitigations, particularly the recent studies performed by a group of the Heinrich-Heine University Duesseldorf in collaboration with the Institute of Energy and Climate Research of the Research Centre (Forschungszentrum) of Juelich are reviewed. The main topics focus on (i) runaway generation mechanisms, (ii) runaway orbits in equilibrium plasma, (iii) transport in stochastic magnetic fields, (iv) diagnostics and investigations of transport of runaway electron and their losses in low density discharges (v) runaway electrons during plasma disruptions, and (vi) runaway mitigation methods. The development of runaway diagnostics enables the measurement of runaway electrons in both the centre and edge of the plasma. The diagnostics provide an absolute runaway energy resolved measurement, the radial decay length of runaway electrons and, the structure and dynamics of runaway electron beams. The new mechanism of runaway electron formation during plasma disruptions is discussed.

Theoretical and experimental studies of runaway electrons in the TEXTOR tokamak

Energy Technology Data Exchange (ETDEWEB)

Abdullaev, S.S.; Finken, K.H.; Wongrach, K.; Willi, O.

2016-07-01

Theoretical and experimental studies of runaway electrons in tokamaks and their mitigations, particularly the recent studies performed by a group of the Heinrich-Heine University Duesseldorf in collaboration with the Institute of Energy and Climate Research of the Research Centre (Forschungszentrum) of Juelich are reviewed. The main topics focus on (i) runaway generation mechanisms, (ii) runaway orbits in equilibrium plasma, (iii) transport in stochastic magnetic fields, (iv) diagnostics and investigations of transport of runaway electron and their losses in low density discharges (v) runaway electrons during plasma disruptions, and (vi) runaway mitigation methods. The development of runaway diagnostics enables the measurement of runaway electrons in both the centre and edge of the plasma. The diagnostics provide an absolute runaway energy resolved measurement, the radial decay length of runaway electrons and, the structure and dynamics of runaway electron beams. The new mechanism of runaway electron formation during plasma disruptions is discussed.

HTGR programme in the United States of America

International Nuclear Information System (INIS)

Fox, J.E.

1991-01-01

The HTGR is being developed by the US Department of Energy within the Division of HTGRs is reported. Fuel design, development and demonstration activities are being conducted by General Atomics and Oak Ridge National Laboratory. During FY-1990 the US continued work in cooperative projects with the KFA-Forschungszentrum Juelich and the Japan Atomic Energy Research Institute on post irradiation examination of fuel capsules and continued the Fission Product Transport Test Program with the French Commissariat a l'Energie Atomique in the COMEDIE in-pile loop at the SILOE reactor at Grenoble. Other activities included installation of the high temperature core-conduction-cooldown test furnace at ORNL which will be used for testing of irradiated fuel compacts under accident conditions. Finally, the US fuel performance experts participated in the MHTGR Cost Reduction Study which is a major effort within the US commercial MHTGR program. 1 tab

78 FR 52872 - Airworthiness Directives; 328 Support Services GmbH (Type Certificate Previously Held by AvCraft...

Science.gov (United States)

2013-08-27

... Services GmbH (Type Certificate Previously Held by AvCraft Aerospace GmbH; Fairchild Dornier GmbH; Dornier... certain 328 Support Services GmbH (Type Certificate Previously Held by AvCraft Aerospace GmbH; Fairchild... send any written relevant data, views, or arguments about this proposed AD. Send your comments to an...

VACOSS 3, a versatile and tamper-resistant electronic sealing system

International Nuclear Information System (INIS)

Arning, F.; Reuters, H.; Bueker, H.

1981-01-01

Seal systems for c/s instrumentation used at present need considerable technical and personal expenditure for installation and verification. This paper describes new electronic seal system VACOSS 3, developed by ProCom GmbH, Aachen, and the Nuclear Research Center Juelich within the frame work of an IAEA research contract. This system allows simple installation, verification, the possibility of remote verification and has high tamper resistance

Applications of instrumental neutron activation analysis in the Analytical Division of the Research Center Juelich (KFA)

International Nuclear Information System (INIS)

Erdtmann, G.

1991-12-01

The Radioanalytical Chemistry Section, as a part of the Central Division of Chemical Analysis of the Research Center KFA Juelich, has the task to provide and to apply nuclear methods in the analytical service for the institutes and projects of the KFA and to customers outside. A great part of this service is trace element determinations by neutron activation analysis using the research reactor FRJ-2. The procedure for the instrumental technique is described and mainly practical aspects are reported in detail. It is based on the k 0 -method developed by Simonits and DeCorte. The results are calculated from the peak areas of the γ-lines and the corresponding k 0 -factors. A new variant of this procedure is required, if the program used for the deconvolution of the γ-spectra provides absolute decay rates of the radionuclides instead of the γ-emission rates. This variant is also described. Some examples of analyses carried out in the analytical service are presented and discussed mainly with respect to accuracy of the results and detection limits. (orig.) [de

A test system for electronics components of the PANDA MVD

Energy Technology Data Exchange (ETDEWEB)

Lai, Alessandra; Stockmanns, Tobias; Ritman, James [Forschungszentrum Juelich (Germany); Collaboration: PANDA-Collaboration

2016-07-01

The PANDA experiment is one of the main devices at the upcoming Facility for Antiproton and Ion Research(FAIR), under construction in Darmstadt, Germany. This fixed target experiment will study the transition region between perturbative and non-perturbative QCD in the energy regime of the charmonium. The innermost sub-detector system of the target spectrometer of the PANDA experiment is the Micro Vertex Detector(MVD). Two types of silicon detectors will be used: pixel detectors and double-sided strip detectors. Two front-end chips are required: the Torino Pixel ASIC(ToPix) and the PANDA Strip ASIC(PASTA). Both are designed to transmit data at a rate of several hundred Megabits per second and are capable of handling the expected hit rate in hot spots of the detector. One key component in the development of new front-end electronics is a test system capable to handle these high rates. It should be flexible enough to test different kinds of front-end electronics and it should be easy to adapt to new prototypes. Therefore, an FPGA-based system is the ideal candidate. For this test system suitable firmware and a software framework are needed. Such a system is under development at the Forschungszentrum Juelich. The main component of the Juelich Digital Readout System(JDRS) is a Virtex 6 FPGA on a development board from Xilinx. In this talk, the mentioned read-out system are introduced, and lab tests with the front-end electronics of the MVD are presented.

BIG KARL and COSY: Examples for high performance magnet design taught by {open_quotes}Papa Klaus{close_quotes}

Energy Technology Data Exchange (ETDEWEB)

Bechtstedt, U.; Hacker, U.; Maier, R.; Martin, S. [Institut fuer Kernphysik, Juelich (Germany); Berg, G.P.A. [Indiana Univ. Cyclotron Facility, Bloomington, IN (United States); Hardt, A. [Fachhochschule Aachen Juelich (Germany); Huerlimann, W. [Power Consulting Ltd., Baden (Switzerland); Meissburger, J. [Institut fuer angewandte Mathematik, Juelich (Germany); Roemer, J.G.M. [Leybold-Heraeus GmbH, Koeln (Germany)] [and others

1995-02-01

The past decades have seen a tremendous development in nuclear, middle, and high energy physics. This advance was in a great part promoted by the availability of newer and more powerful instruments. Over time, these instruments grew in size as well as in sophistication and precision. Nearly all these devices had one fundamental thing in common - magnetic fields produced with currents and iron. The precision demanded by the new experiments and machines did bring the magnet technology to new frontiers requiring the utmost in the accuracy of magnetic fields. The complex properties of the iron challenged innumerable physicists in the attempt to force the magnetic fields into the desired shape. Experience and analytical insight were the pillars for coping with those problems and only few mastered the skills and were in addition able to communicate their intricate knowledge. It was a fortuitous situation that the authors got to know Klaus Halbach who belonged to those few and who shared his knowledge contributing thus largely to the successful completion of two large instruments that were built at the Forschungszentrum Juelich, KFA, for nuclear and middle energy physics. In one case the efforts went to the large spectrometer named BIG KARL whose design phase started in the early 70`s. In the second case the work started in the early 80`s with the task to build a high precision 2.5 GeV proton accelerator for cooled stored and extracted beams known as COSY-Juelich.

Main research activities at the Institute of Energy Process Engineering Research Centre Juelich Germany

International Nuclear Information System (INIS)

Achenbach, E.

1995-06-01

This report summarizes four lectures been held during the author's seven-week stay at the Department of High Temperature Engineering in the period from February 2nd to March 23rd in 1995 under the JAERI foreign researcher inviting program. Though the Institute of Energy Process Engineering(IEV) in the Research Centre Juelich(KFA), has recently changed the subject of research from nuclear technology of high-temperature gas-cooled reactors(HTGRs) to fuel cell technology, there are many common items of research. In particular, the following topics presented in the lectures are of mutual interest: 1)Methane-steam reforming used at JAERI as HTGR heat utilization system and applied at KFA to internal reforming in the high temperature Solid Oxide Fuel Cell(SOFC), 2)Technology and modeling of high temperature electrolysis at JAERI as the inverse process of the SOFC developed at KFA, 3)Flow simulation of branched systems treated at JAERI for the development of high temperature heat exchangers and performed at KFA with respect to the SOFC manifold system, 4)Fundamental aspects of heat and mass transfer. The report should help to create a basis of discussing the above mentioned problems and to stimulate the research work at JAERI. (author)

Forschungszentrum Rossendorf, Institute of Radiochemistry. Annual report 2004

Energy Technology Data Exchange (ETDEWEB)

Bernhard, G [ed.

2005-07-01

The Institute of Radiochemistry (IRC), one of the six Institutes of the Forschungszentrum Rossendorf (FZR) performs basic and applied research in the fields of radiochemistry and radioecology. Motivation and background of our research are environmental processes relevant for the installation of nuclear waste repositories, for remediation of uranium mining and milling sites, and for radioactive contaminations caused by nuclear accidents and fallout. Because of their high radiotoxicity and long half-life the actinides are of special interest. The research is focused on a better understanding of the chemical behavior of actinides in the environment on a molecular level. We will increase our efforts to study both the speciation of actinides on bio-molecular interfaces and their transport in bio-systems. Current topics of our research work are: aquatic chemistry of actinides, actinides in bio-systems, interaction of actinides with solid phases, Reactive transport of actinides. About 60 scientists, technicians and PhD students are employed at the Institute of Radiochemistry. We accomplished many new scientific results in the past year, which are presented in this annual report. Among them only few can be highlighted in this preface. Further progress was achieved in understanding the formation and characterization of uranium containing colloids. The newly installed method of laser-induced breakdown detection was very helpful for the identification of uranium colloids under anoxic conditions. We were very successful in the determination of formation pathways and structure of various actinide complexes. These results contribute to a better understanding of actinide speciation in geo- and bio-systems, especially with respect to the chemical processes on the interfaces. The results achieved in the characterization of the properties, modification, and interaction of the S-layers of Bacillus sphaericus with uranium and some other heavy metals strengthen our hope to use this

Forschungszentrum Rossendorf, Institute of Radiochemistry. Annual report 2004

International Nuclear Information System (INIS)

Bernhard, G.

2005-01-01

The Institute of Radiochemistry (IRC), one of the six Institutes of the Forschungszentrum Rossendorf (FZR) performs basic and applied research in the fields of radiochemistry and radioecology. Motivation and background of our research are environmental processes relevant for the installation of nuclear waste repositories, for remediation of uranium mining and milling sites, and for radioactive contaminations caused by nuclear accidents and fallout. Because of their high radiotoxicity and long half-life the actinides are of special interest. The research is focused on a better understanding of the chemical behavior of actinides in the environment on a molecular level. We will increase our efforts to study both the speciation of actinides on bio-molecular interfaces and their transport in bio-systems. Current topics of our research work are: aquatic chemistry of actinides, actinides in bio-systems, interaction of actinides with solid phases, Reactive transport of actinides. About 60 scientists, technicians and PhD students are employed at the Institute of Radiochemistry. We accomplished many new scientific results in the past year, which are presented in this annual report. Among them only few can be highlighted in this preface. Further progress was achieved in understanding the formation and characterization of uranium containing colloids. The newly installed method of laser-induced breakdown detection was very helpful for the identification of uranium colloids under anoxic conditions. We were very successful in the determination of formation pathways and structure of various actinide complexes. These results contribute to a better understanding of actinide speciation in geo- and bio-systems, especially with respect to the chemical processes on the interfaces. The results achieved in the characterization of the properties, modification, and interaction of the S-layers of Bacillus sphaericus with uranium and some other heavy metals strengthen our hope to use this

LAP-ND: a new instrument for vector polarization analysis and neutron depolarization measurements at FRJ-2

International Nuclear Information System (INIS)

Ioffe, Alexander; Bussmann, Klaus; Dohmen, Ludwig; Axelrod, Leonid; Gordeev, Gennadi; Brueckel, Thomas

2004-01-01

The method of vector analysis of the neutron polarization allows for the determination of both the magnitude and the direction of the magnetization vector in the sample. A directional distribution of the magnetization in a sample results in a spread of the direction of the polarization vector in space and thus in the depolarization of the incident beam. A new neutron depolarization set up is installed at the research reactor FRJ-2 of the Forschungszentrum Juelich. The main feature of the set up is the use of rather long wavelength, λ=(4-6.5) A, neutrons thus allowing for a significant increase in the sensitivity of depolarization measurements. The set up uses a non-cryogenic zero-field sample chamber with the residual magnetic field of about 1 mG. It will be used for the determination of the sample magnetization at mesoscopic and macroscopic levels and for the study of magnetic phase transitions, magnetic nanostructures, magnetic glasses, etc

LAP-ND: a new instrument for vector polarization analysis and neutron depolarization measurements at FRJ-2

Energy Technology Data Exchange (ETDEWEB)

Ioffe, Alexander; Bussmann, Klaus; Dohmen, Ludwig; Axelrod, Leonid; Gordeev, Gennadi; Brueckel, Thomas

2004-07-15

The method of vector analysis of the neutron polarization allows for the determination of both the magnitude and the direction of the magnetization vector in the sample. A directional distribution of the magnetization in a sample results in a spread of the direction of the polarization vector in space and thus in the depolarization of the incident beam. A new neutron depolarization set up is installed at the research reactor FRJ-2 of the Forschungszentrum Juelich. The main feature of the set up is the use of rather long wavelength, {lambda}=(4-6.5) A, neutrons thus allowing for a significant increase in the sensitivity of depolarization measurements. The set up uses a non-cryogenic zero-field sample chamber with the residual magnetic field of about 1 mG. It will be used for the determination of the sample magnetization at mesoscopic and macroscopic levels and for the study of magnetic phase transitions, magnetic nanostructures, magnetic glasses, etc.

Microspheres Prepared by Internal Gelation for Actinide Co-Conversion - Influence of Organic Precursors in Initial Solution on Structure during Thermal Treatment

International Nuclear Information System (INIS)

Benay, G.; Modolo, G.; Robisson, A.C.; Grandjean, S.

2008-01-01

The fabrication of fuels or targets for transmutation of minor actinides requires a dust-free process. Such a requirement can be fulfilled by sol-gel methods, which allow the production of microsphere precursors. Internal gelation, one of these methods, was studied at Cea Marcoule and FZ (Forschungszentrum Juelich Germany). A study of the parameters involved in internal gelation (essentially the quantity of organic additives urea and hexa-methylene-tetramine (HMTA) present in the initial solution) was performed. Afterwards, the effects of these parameters on the structural evolution of the microspheres during thermal treatment were studied. It was observed that the structure and density of the microspheres are heavily dependant of the quantity of organic precursors present in the initial solution. Urea in particular has been found to bring porosity to the material, in addition to its catalytic effect on HMTA decomposition. The elimination of these organic compounds is however a major issue which causes the formation of cracks on the microspheres if no optimization is performed. (authors)

Forschungszentrum Rossendorf, Institute of Radiochemistry. Annual report 2000

International Nuclear Information System (INIS)

2001-05-01

The Institute of Radiochemistry (IRC), one of the five institutes of the Forschungszentrum Rossendorf (FZR) performs basic and applied research in the fields of radiochemistry and radioecology. Main goal is the quantification of the interaction and mobility of radionuclides in the geo- and biosphere. Because of their high radiotoxicity and long half-life the actinides are of special interest. Among the actinides uranium and its manifold interactions plays a major role in the institute's research activities. In addition the interactions of some important long-lived fission and decay products are studied. More than 60 scientists, technicians and PhD students are employed in the Institute of Radiochemistry. The research is focused on understanding the fundamental processes relevant for the behavior of radionuclides in the environment. Main topics are: Aquatic chemistry, Radionuclide interaction with mineral surfaces, Radionuclide interaction with biological materials (microbes and plants), Modeling the radionuclide transport, Development of spectroscopic speciation methods. Further progress was achieved in understanding the interaction mechanism of actinides with humic acids. The coordination numbers and bond distances of the coordinated oxygens have been determined by X-ray absorption spectroscopy for tetra- and pentavalent actinides (Np(IV) and Np(V)). It was shown that the carboxylic groups of the humic acid form monodentate complexes with the neptonyl ions. We extended our laser spectroscopic capabilities by installing a new laser system with ultra-short pulses (130 fs) for fluorescence measurements of organic substances. We intend to gain information on actinide complexes with organic ligands by studying the fluorescence properties of the organics with very short life times. The laser system and the method were successfully validated by the determination of the well-known uranyl-salicylic acid complexation. Although surface complexation concepts are more and more

77 FR 12450 - Airworthiness Directives; BRP-Powertrain GmbH & Co KG Rotax Reciprocating Engines

Science.gov (United States)

2012-03-01

.... (1) Inspect the oil pump and engine valve train for oil leaks in accordance with paragraph 3.1) step... paragraph 3.1.3) steps 19. through 21. of BRP- Powertrain GmbH & Co KG, Rotax Aircraft Engines Mandatory... Airworthiness Directives; BRP-Powertrain GmbH & Co KG Rotax Reciprocating Engines AGENCY: Federal Aviation...

The development of divertor and first wall armour parts at JAERI, Sandia N.L. and KFA Juelich

International Nuclear Information System (INIS)

Akiba, M.; Bolt, H.; Watson, R.; Kneringer, G.; Linke, J.

1991-01-01

The development of new armour materials, and fabrication and testings of the divertor and first wall mock-ups have worldwidely been carried out during the Conceptual Design Activites (CDA) of ITER. This paper is a review of the activities on the divertor and first wall armour components which has been performed by JAERI, Sandia National Laboratory, and KFA Juelich. The design requirements have instantly been reflected in material development. For instance, carbon fiber composites (CFCs) have already been developed to have a thermal conductivity as high as copper at room temperature. Further modification of CFC's has been made. Based on the extensive progress in armour materials, the fabrication and testings of mock-ups have been started. Divertor mock-ups which are able to endure a stationary heat flux of 8 to 15 MW/m 2 have already been developed. Some new high heat flux test facilities have been constructed and are able to simulate a heat load of plasma disruption. Extensive understanding on disruption erosion of the armour materials has been obtained by experiments with these facilities. Some mock-up tests and disruption simulating tests have been performed under international collaboration. (orig.)

Forschungszentrum Rossendorf. Institute of Bioinorganic and Radiopharmaceutical Chemistry. Annual report 2002

Energy Technology Data Exchange (ETDEWEB)

Johannsen, B.; Seifert, S. (eds.)

2003-01-01

In 2002 the Institute of Bioinorganic and Radiopharmaceutical Chemistry, one of five institutes in the Forschungszentrum Rossendorf e.V., continued and further developed its basic and application-oriented research. Research was focused on radiotracers as molecular probes to make the human body biochemically transparent with regard to individual molecular reactions. While further pursuing and extending our chemical, biological and medical activities in the PET Centre and being engaged in the coordination chemistry and radiopharmacology of technetium, rhenium and other metals, new lines of activity have also been opened up recently. This involves bioactive substances as they are present in food. Such substances may cause a health risk or may exert effects not yet fully understood. New biotechnological procedures in food processing also give rise to new questions that can be addressed by PET. As illustrated by the majority of contributions in this report, the Institute is predominantly engaged in radiopharmaceutical chemistry of both radiometals and the PET nuclides carbon-11 and fluorine-18. The improvement of labelling methods continued to remain an area of considerable endeavour. The review article on radiochemistry with the short-lived positron emitters {sup 11}C and {sup 18}F is meant to emphasize this field of research and to help to classify our contribution to this area. As for the radiometals, our studies agree with the more and more demanding insight that the coordination has a not sufficiently predictable impact on the in vivo behaviour of the molecule into which the chelate unit is integrated. Therefore, attempts to better understand and adjust the in vivo behaviour of the radiotracers are being continued. In order to reflect on and identify trends and perspectives, the Institute organized on March 7-8, 2002, an international conference on advances and perspectives in radiotracer development. The Institute's chemically and radiopharmacologically

Forschungszentrum Rossendorf. Institute of Bioinorganic and Radiopharmaceutical Chemistry. Annual report 2002

International Nuclear Information System (INIS)

Johannsen, B.; Seifert, S.

2003-01-01

In 2002 the Institute of Bioinorganic and Radiopharmaceutical Chemistry, one of five institutes in the Forschungszentrum Rossendorf e.V., continued and further developed its basic and application-oriented research. Research was focused on radiotracers as molecular probes to make the human body biochemically transparent with regard to individual molecular reactions. While further pursuing and extending our chemical, biological and medical activities in the PET Centre and being engaged in the coordination chemistry and radiopharmacology of technetium, rhenium and other metals, new lines of activity have also been opened up recently. This involves bioactive substances as they are present in food. Such substances may cause a health risk or may exert effects not yet fully understood. New biotechnological procedures in food processing also give rise to new questions that can be addressed by PET. As illustrated by the majority of contributions in this report, the Institute is predominantly engaged in radiopharmaceutical chemistry of both radiometals and the PET nuclides carbon-11 and fluorine-18. The improvement of labelling methods continued to remain an area of considerable endeavour. The review article on radiochemistry with the short-lived positron emitters 11 C and 18 F is meant to emphasize this field of research and to help to classify our contribution to this area. As for the radiometals, our studies agree with the more and more demanding insight that the coordination has a not sufficiently predictable impact on the in vivo behaviour of the molecule into which the chelate unit is integrated. Therefore, attempts to better understand and adjust the in vivo behaviour of the radiotracers are being continued. In order to reflect on and identify trends and perspectives, the Institute organized on March 7-8, 2002, an international conference on advances and perspectives in radiotracer development. The Institute's chemically and radiopharmacologically oriented activities

Association EURATOM-FZJ. Annual progress report 2011. SC-FZJ 88(12)/4.1.2

International Nuclear Information System (INIS)

2011-01-01

Forschungszentrum Juelich (FZJ) as a EURATOM Association coordinates its fusion research activities within the Nuclear Fusion Project (KFS). The programme is based on several insti-tutes and is well embedded into the European fusion research structure. The major part of the Juelich research activities is located within the Institute of Energy and Climate Research (IEK). This is organized along a number of institute parts, among which fusion research is concentrat-ed within IEK-4 Plasma Physics - the former Institute for Plasma Physics IPP- and IEK-2 Microstructure and Properties of Materials. The IEK-4 Plasma Physics has the largest share of scientific staff in physics and technology for fusion, operates the TEXTOR tokamak, performs scientific work on JET and DIII-D, supports the Wendelstein 7-X construction and takes up significant projects related to the development of ITER. IEK-2 operates the high heat flux test facilities JUDITH 1 and 2 which are installed inside a hot cell and in a controlled area which is licensed to operate with toxic and radiating materials; this group represents the materials science expertise within the Juelich fusion pro-gramme. The Central Technology Division (ZAT) provides engineering expertise and specialised workshop capacities. The Juelich Supercomputing Centre (JSC) operates various types of supercomputer systems, among which one device (HPC-FF) is dedicated exclusively to fusion research within EFDA. The Association EURATOM-FZJ has very close contacts to the neighbouring EURATOM associations in Belgium and The Netherlands. In 1996 they together have founded the Trilat-eral Euregio Cluster (TEC) which provides a clustering of resources in order to perform a co-ordinated R and D programme, to operate or construct large facilities (TEXTOR, MAGNUM-PSI), to combine different kinds of expertise and to allow for the forming of a strong partner-ship as a consortium within the ITER construction phase. An updated TEC agreement with a strong

76 FR 37684 - Airworthiness Directives; Diamond Aircraft Industries GmbH Model (Diamond) DA 40 Airplanes...

Science.gov (United States)

2011-06-28

... Industries GmbH Model (Diamond) DA 40 Airplanes Equipped With Certain Cabin Air Conditioning Systems AGENCY... inspections of the Diamond Model DA 40 airplanes equipped with a VCS installed per Premier Aircraft Service... GmbH Model (Diamond) DA 40 Airplanes Equipped With Certain Cabin Air Conditioning Systems: Docket No...

77 FR 35890 - Airworthiness Directives; Diamond Aircraft Industries GmbH Airplanes

Science.gov (United States)

2012-06-15

...., Washington, DC 20590, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For service... Service Information Diamond Aircraft Industries GmbH has issued Mandatory Service Bulletin No. MSB 42-092...

75 FR 52292 - Airworthiness Directives; Diamond Aircraft Industries GmbH Models DA 40 and DA 40F Airplanes

Science.gov (United States)

2010-08-25

... Industries GmbH Models DA 40 and DA 40F Airplanes AGENCY: Federal Aviation Administration (FAA), Department... new airworthiness directive (AD) for all Diamond Aircraft Industries GmbH Models DA 40 and DA 40F... received information from Diamond Aircraft Industries GmbH that the Models DA 40 and DA 40F airplanes have...

Basic lay-out, arrangement and design criteria of heat components of the ''nuclear coal gasification prototype plant (PNP)''

International Nuclear Information System (INIS)

Pruschek, R.

1980-01-01

Since 1975, the companies Bergbau-Forschung GmbH, GHT Gesellschaft fuer Hochtemperaturreaktor-Technik mbH, Hochtemperatur-Reaktorbau GmbH, Kernforschungsanlage Juelich GmbH und Rheinische Braunkohlenwerke AG are working jointly on the Project ''Prototype Plant Nuclear Process Heat (PNP)'', with promotion of the ''Bundesminister fuer Forschung und Technologie'' and of the ''Minister fuer Wirtschaft, Mittelstand und Verkehr des Landes Nordrhein-Westfalen''. The objectives of the project are the development of a high-temperature reactor, with a core outlet temperature of 950 0 C, suitable for various process heat applications, and the development and testing of the appropriate coal gasification technology. The applied gasifications methods comprise endothermal and exothermal reactions. Therefore, various heat transfer components are to be developed. In the context of this Specialists Meeting, only those components will be discussed by which heat is transferred from primary helium to secondary helium or from helium to the working or process fluid

77 FR 42958 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2012-07-23

... airworthiness directive (AD) for Eurocopter Deutschland GmbH (ECD) Model MBB-BK 117 (all versions) and BO-105LS... tail rotor pitch link and subsequent loss of control of the helicopter. DATES: This AD becomes... improperly swaged spherical bearing on the pitch link, which could result in loss of tail rotor control and...

Lippe-Ems GmbH nuclear power stations. Annual report 1992

International Nuclear Information System (INIS)

1993-01-01

The Nuclear power company Lippe-Ems GmbH (KLE) runs the Emsland Nuclear Power Station (KKE) in Lingen (Ems) with a 1300 MW pressurized Water reactor. Partners of KLE are VEW and Elektromark. This 1992 annual report reveals numerous financial data of the operator (balance sheet, profit and loss account.) (orig./UA) [de

10 years of sanitation work at Wismut GmbH

International Nuclear Information System (INIS)

Runge, W.

2001-01-01

Ten years after the work on uranium mines abandoned in 1990 was started, all sites of the Wismut GmbH report considerable progress. Of the 13 billion DM granted in 1991 by the German state, 6.7 had been spent by the end of 2000. DM 2.7 billion were spent in East Thuringia and DM 3 billion in Sayony. The work done in 2000 amounted to DM 485 million [de

Hochtemperatur-Kernkraftwerk GmbH (HKG). Annual report 1985

International Nuclear Information System (INIS)

1986-01-01

The annual report presents the agenda of the general meeting of members, held on July 3, 1986 at Hamm-Uentrop, the report of the managing board, and the annual financial statement as of December 31, 1985, including the profit and loss account of the period January 1 to December 31, 1985. The object of the HKG GmbH is the planning, financing, installation, and operation of the Hamm-Uentrop nuclear power station equipped with a high-temperature reactor, as a joint enterprise of the European partners. (UA) [de

The control system of the polarized internal target of ANKE at COSY

Energy Technology Data Exchange (ETDEWEB)

Kleines, H. [Zentralinstitut fuer Elektronik, Forschungszentrum Juelich, 52425 Juelich (Germany); Sarkadi, J. [Zentralinstitut fuer Elektronik, Forschungszentrum Juelich, 52425 Juelich (Germany); Zwoll, K. [Zentralinstitut fuer Elektronik, Forschungszentrum Juelich, 52425 Juelich (Germany); Engels, R. [Institut fuer Kernphysik, Forschungszentrum Juelich, 52425 Juelich (Germany); Grigoryev, K. [Institut fuer Kernphysik, Forschungszentrum Juelich, 52425 Juelich (Germany); Mikirtychyants, M. [Institut fuer Kernphysik, Forschungszentrum Juelich, 52425 Juelich (Germany); Nekipelov, M. [Institut fuer Kernphysik, Forschungszentrum Juelich, 52425 Juelich (Germany); Rathmann, F. [Institut fuer Kernphysik, Forschungszentrum Juelich, 52425 Juelich (Germany); Seyfarth, H. [Institut fuer Kernphysik, Forschungszentrum Juelich, 52425 Juelich (Germany)]. E-mail: h.seyfarth@fz-juelich.de; Kravtsov, P. [St. Petersburg Nuclear Physics Institute, 188350 Gatchina (Russian Federation); Vasilyev, A. [St. Petersburg Nuclear Physics Institute, 188350 Gatchina (Russian Federation)

2006-05-10

The polarized internal target for the ANKE experiment at the Cooler Synchrotron COSY of the Forschungszentrum Juelich utilizes a polarized atomic beam source to feed a storage cell with polarized hydrogen or deuterium atoms. The nuclear polarization is measured with a Lamb-shift polarimeter. For common control of the two systems, industrial equipment was selected providing reliable, long-term support and remote control of the target as well as measurement and optimization of its operating parameters. The interlock system has been implemented on the basis of SIEMENS SIMATIC S7-300 family of programmable logic controllers. In order to unify the interfacing to the control computer, all front-end equipment is connected via the PROFIBUS DP fieldbus. The process control software was implemented using the Windows-based WinCC toolkit from SIEMENS. The variety of components, to be controlled, and the logical structure of the control and interlock system are described. Finally, a number of applications derived from the present development to other, new installations are briefly mentioned.

Electromagnetic Transition Form Factor of the η meson with WASA-at-COSY

Science.gov (United States)

Goswami, A.

2016-11-01

In this work we present a study of the Dalitz decay η → γe+e-. The aim of this work is to measure the transition form factor of the η meson. The transition form factor of the η meson describes the electromagnetic structure of the meson. The study of the Dalitz decay helps to calculate the transition form factor of the η meson. When a particle is point-like it's decay rate can be calculated within QED. However, the complex structure of the meson modifies its decay rate. The transition form factor is determined by comparing the lepton-antilepton invariant mass distribution with QED. For this study data on proton-proton reaction at a beam energy of 1.4 GeV has been collected with WASA-at-COSY detector at Forschungszentrum Juelich, Germany. In the higher invariant mass region recent theoretical calculations slightly deviate from the fit to the data. We expect better results in the higher invariant mass region than previous measurements. The preliminary results of the analysis will be presented.

Electromagnetic Transition Form Factor of the η meson with WASA-at-COSY

Directory of Open Access Journals (Sweden)

Goswami A.

2016-01-01

Full Text Available In this work we present a study of the Dalitz decay η → γe+e−. The aim of this work is to measure the transition form factor of the η meson. The transition form factor of the η meson describes the electromagnetic structure of the meson. The study of the Dalitz decay helps to calculate the transition form factor of the η meson. When a particle is point-like it’s decay rate can be calculated within QED. However, the complex structure of the meson modifies its decay rate. The transition form factor is determined by comparing the lepton-antilepton invariant mass distribution with QED. For this study data on proton-proton reaction at a beam energy of 1.4 GeV has been collected with WASA-at-COSY detector at Forschungszentrum Juelich, Germany. In the higher invariant mass region recent theoretical calculations slightly deviate from the fit to the data. We expect better results in the higher invariant mass region than previous measurements. The preliminary results of the analysis will be presented.

Electromagnetic transition form factor of the η meson with WASA-at-COSY

Energy Technology Data Exchange (ETDEWEB)

Goswami, Ankita [Indian Institute of Technology Indore, Indore (India); Collaboration: WASA-at-COSY-Collaboration

2015-07-01

The aim of this work is to measure the transition form factor of the η meson. The transition form factor describes the internal structure of a particle. The precise determination of the transition form factor of the η meson is possible through the η→γe{sup +} e{sup -} Dalitz decay. When a particle is point-like then its decay rate can be calculated within QED. However, the complex structure of the particle modifies its decay rate. The transition form factor is determined by comparing the lepton-antilepton invariant mass distribution with QED. η mesons are produced using the reaction pp→ppη at a beam kinetic energy of 1.4 GeV at the COSY accelerator of Forschungszentrum Juelich and decay particles of the η meson are detected with the WASA detector. In the higher invariant mass region recent theoretical calculations slightly deviate from the the data. With the high statistics dataset we expect precise results in the higher invariant mass region. The status of the analysis is reported.

77 FR 65503 - Airworthiness Directives; Diamond Aircraft Industries GmbH Airplanes

Science.gov (United States)

2012-10-29

... through Friday, except Federal holidays. For service information identified in this proposed AD, contact.... Prompted by the reported event, Diamond Aircraft Industries (DAI) published Recommended Service Bulletin... MCAI in the AD docket. Relevant Service Information Diamond Aircraft Industries GmbH has issued the...

78 FR 16196 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2013-03-14

... directive (AD) for all Eurocopter Deutschland GmbH (ECD) EC 135 P1, P2, P2+, T1, T2, and T2+ helicopters..., except Federal holidays. The AD docket contains this proposed AD, the economic evaluation, any comments.... We prepared an economic evaluation of the estimated costs to comply with this proposed AD and placed...

DNS: Diffuse scattering neutron time-of-flight spectrometer

Directory of Open Access Journals (Sweden)

Yixi Su

2015-08-01

Full Text Available DNS is a versatile diffuse scattering instrument with polarisation analysis operated by the Jülich Centre for Neutron Science (JCNS, Forschungszentrum Jülich GmbH, outstation at the Heinz Maier-Leibnitz Zentrum (MLZ. Compact design, a large double-focusing PG monochromator and a highly efficient supermirror-based polarizer provide a polarized neutron flux of about 107 n cm-2 s-1. DNS is used for the studies of highly frustrated spin systems, strongly correlated electrons, emergent functional materials and soft condensed matter.

Investigations to the suitability of a computer-aided design system for mechanical construction in the ZAT of KFA Juelich

International Nuclear Information System (INIS)

Schoerner, M.; Koch, R.; Cordewiner, H.J.; Bachner, E.

1983-06-01

There is an extensive range of CAD systems in the marketplace which have been developed by various institutions for different types of applications and for different products, in some cases linked to specific hardware. Apart from such obvious features like prices, rates of sale and computer performance, other criteria such as documentation, ease of adaption and expansion, which are, as a rule, difficult to judge and quantify, play a decisive role. As an optimal CAD system does not exist in respect of every type of application the intended usage must be taken seriously into consideration when selecting a CAD system. On the basis of fundamental investigations of the suitability of CAD for the department for mechanical construction of ZAT at the KFA Juelich, the requirements and special needs of the construction process in the ZAT have been examined. In a short survey of the available CAD-systems a pre choice on the basis of some definitive musts has been made. The performance profile of the remaining systems has been thouroughly investigated and compared with the requirements of the ZAT. Thus the necessary decisions can be made on the basis of documented assessments. (orig.) [de

The Kerntechnischer Hilfsdienst GmbH and its facilities for emergency cases

International Nuclear Information System (INIS)

Neumann, W.

1979-01-01

Organisation of the KHG: Permanent staff, specialized staff, readiness for calling, readiness for transport, user contracts. Technical equipment: Radiation protection equipment, gas masks and breathing equipment, decontamination equipment, remote-controlled manipulator vehicles, radio equipment and image transmission. Tasks of the Kerntechnischer Hilfsdienst GmbH. (orig.) [de

77 FR 66409 - Airworthiness Directives; Diamond Aircraft Industries GmbH Airplanes

Science.gov (United States)

2012-11-05

...., Washington, DC 20590, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For service... occupants. To address this concern, Diamond Aircraft Industries (DAI) published Mandatory Service Bulletin... MCAI in the AD docket. Relevant Service Information Diamond Aircraft Industries GmbH has issued Diamond...

78 FR 22209 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2013-04-15

... GmbH (Eurocopter) Model EC135 P1, EC135 P2, EC135 P2+, EC135 T1, EC135 T2, EC135 T2+, and MBB-BK 117 C... holidays. The AD docket contains this proposed AD, the economic evaluation, any comments received, and... evaluation of the estimated costs to comply with this proposed AD and placed it in the AD docket. List of...

Contributions for the international conference on carbon and graphite CARBON '88

International Nuclear Information System (INIS)

Delle, W.

1988-08-01

This report is the compilation of three papers prepared by the Kernforschungsanlage Juelich GmbH (KFA) in collaboration with other partners for the International Conference CARBON '88. The topics were as follows: 1.) Fracture toughness of fast neutron irradiated graphite (W. Delle, H. Derz, G. Kleist, H. Nickel, W. Thiele); 2.) The irradiation creep characteristics of graphite to high fluences (C.R. Kennedy, M. Cundy, G. Kleist); and 3.) New silicon carbide materials starting with the Coat-Mix procedure (H.K. Luhleich, K. Bach, F.J. Dias, M. Kampel, F. Koch, H. Nickel). (orig./MM)

Karlsruhe Research Center, Nuclear Safety Research Project (PSF). Annual report 1994; Forschungszentrum Karlsruhe, Projekt Nukleare Sicherheitsforschung. Jahrsbericht 1994

Energy Technology Data Exchange (ETDEWEB)

Hueper, R. [ed.

1995-08-01

The reactor safety R and D work of the Karlsruhe Research Centre (FZKA) has been part of the Nuclear Safety Research Projet (PSF) since 1990. The present annual report 1994 summarizes the R and D results. The research tasks are coordinated in agreement with internal and external working groups. The contributions to this report correspond to the status of early 1995. An abstract in English precedes each of them, whenever the respective article is written in German. (orig.) [Deutsch] Seit Beginn 1990 sind die F+E-Arbeiten des Forschungszentrum Karlsruhe (FZKA) zur Reaktorsicherheit im Projekt Nukleare Sicherheitsforschung (PSF) zusammengefasst. Der vorliegende Jahresbericht 1994 enthaelt Beitraege zu aktuellen Fragen der Sicherheit von Leichtwasserreaktoren und innovativen Systemen sowie der Umwandlung von minoren Aktiniden. Die konkreten Forschungsthemen und -vorhaben werden mit internen und externen Fachgremien laufend abgestimmt. An den beschriebenen Arbeiten sind die folgenden Institute und Abteilungen des FZKA beteiligt: Institut fuer Materialforschung IMF I, II, III; Institut fuer Neutronenphysik und Reaktortechnik INR; Institut fuer Angewandte Thermo- und Fluiddynamik IATF; Institut fuer Reaktorsicherheit IRS; Hauptabteilung Ingenieurtechnik HIT; Hauptabteilung Versuchstechnik HVT sowie vom KfK beauftragte externe Institutionen. Die einzelnen Beitraege stellen den Stand der Arbeiten zum Fruehjahr 1995 dar und sind entsprechend dem F+E-Programm 1994 numeriert. Den in deutscher Sprache verfassten Beitraege sind Kurzfassungen in englischer Sprache vorangestellt. (orig.)

Neutron scattering. Lectures of the JCNS laboratory course held at Forschungszentrum Juelich and the research reactor FRM II of TU Munich

International Nuclear Information System (INIS)

Brueckel, T.; Heger, G.; Richter, D.; Zorn, R.

2007-01-01

The following topics are dealt with: Fourier transform, basic assumptions of quantum mechanics and the Born approximation, symmtery in crystals, neutron sources, neutron elastic scattering and properties, polarized neutron scattering, correlation functions measured by scattering experiments, grazing incidence neutron scattering, neutron diffractometers, small-angle scattewring inelastic crystal spectrometers, time-of-flight spectrometers using NSE, structure determination, inelastic neutron scattering with phonon and magnon excitations, structure of complex fluids and macromolecules, polymer dynamics, magnetism. (HSI)

In-pile testing of ITER first wall mock-ups at relevant thermal loading conditions in the LVR-15 nuclear research reactor

Energy Technology Data Exchange (ETDEWEB)

Kysela, Jan [Research Centre Rez, Hlavni 130, 250 68 Husinec-Rez (Czech Republic); Entler, Slavomir, E-mail: slavomir.entler@cvrez.cz [Research Centre Rez, Hlavni 130, 250 68 Husinec-Rez (Czech Republic); Vsolak, Rudolf; Klabik, Tomas [Research Centre Rez, Hlavni 130, 250 68 Husinec-Rez (Czech Republic); Zlamal, Ondrej [CEZ, Duhova 2/1444, 140 53 Praha 4 (Czech Republic); Bellin, Boris; Zacchia, Francesco [Fusion for Energy, Josep Pla, 2, Torres Diagonal Litoral B3, 08019 Barcelona (Spain)

2015-10-15

Highlights: • Irradiated thermal fatigue testing of the ITER primary first wall mock-ups. • Cyclic heat flux of 0.5 MW/m{sup 2} in the neutron field of the nuclear reactor core. • 17,040 thermal cycles. • Radiation damage in the range of 0.41–1.17 dpa depending on the material. - Abstract: The TW3 in-pile rig enabled the thermal fatigue testing of ITER primary first wall mock-ups in the core of the nuclear reactor. This experiment investigated the neutron irradiation influence on the design performance under high heat flux testing. A thermal flux of 0.5 MW/m{sup 2} in the neutron field of the core of the LVR-15 nuclear reactor was applied. Within the scope of the tests with simultaneous neutron irradiation, the TW3 rig reached a record of 17,040 thermal cycles with the radiation damage in the range of 0.41–1.17 dpa depending on the material. Even after a high number of thermal cycles, while being irradiated by neutrons, no damage of the tested mock-ups was visually observed. Further testing and analysis will follow in the Forschungszentrum Juelich.

Conceptual design for a bulk tungsten divertor tile in JET

International Nuclear Information System (INIS)

Mertens, Ph.; Hirai, T.; Linke, J.; Neubauer, O.; Pintsuk, G.; Philipps, V.; Sadakov, S.; Samm, U.; Schweer, B.

2007-01-01

The ITER-like Wall project (ILW) for JET aims at providing the plasma chamber of the tokamak with an environment of mixed materials which will be relevant for the actual first wall construction on ITER. Tungsten plays a key role in the divertor cladding. For the central tile, also called LB-SRP for 'load-bearing septum replacement plate', bulk tungsten is envisaged in order to cope with the high heat loads expected (up to 10 MW/m 2 for 10 s). The outer strike-point in the divertor will be positioned on this tile for the most relevant configurations. Forschungszentrum Juelich (FZJ) has developed a conceptual design based on an assembly of tungsten blades or lamellae. An appropriate interface with the base carrier of JET, on which modules of two tiles are positioned and fixed by remote handling procedures, is a substantial part of the integral design. Important issues are the electromagnetic forces and expected temperature distributions. Material choices combine tungsten, TZM TM , Inconel and ceramic parts. The completed design has been finalised in a proposal to the ILW project, with utmost ITER-relevance

Simulation of spin dynamics to measure electric dipole moments in storage rings

Energy Technology Data Exchange (ETDEWEB)

Rosenthal, Marcel; Lehrach, Andreas [Forschungszentrum Juelich GmbH (Germany). Inst. fuer Kernphysik; Collaboration: JEDI-Collaboration

2013-07-01

CP violation in the baryon sector, which is predicted by the Standard Model of Particle Physics, is too small to explain the matter and antimatter asymmetry in our universe. Permanent Electric Dipole Moments (EDMs) violate both P and T symmetries and are therefore, through the CPT theorem, also CP violating. No direct EDM measurements for protons, deuterons and light nuclei have been performed up to now. The JEDI collaboration at Forschungszentrum Juelich (FZJ) and the BNL-EDM collaboration at Brookhaven National Laboratory (BNL) pursue the goal to measure the EDMs of these particles in dedicated storage rings. Therefore different approaches are studied to reach an ultimate sensitivity of 10{sup -29} e.cm. A first direct measurement of the proton and deuteron EDM at a sensitivity level of 10{sup -24} e.cm will be performed in the existing conventional storage ring at FZJ, the Cooler Synchrotron COSY. Particle tracking simulations to explore the motion-correlated spin dynamics are a crucial part of feasibility studies of the planned storage ring EDM experiments. In a first step, a benchmarking of simulation codes with measurements at the Cooler Synchrotron COSY is performed.

Business model analysis in asset management : the case JRS Finanzmandate Gmbh

OpenAIRE

Rogg, Christina

2016-01-01

This bachelor’s thesis was prepared to solve a current business case on behalf of JRS Finanzmandate GmbH, a German independent financial advisory and asset management company. The objectives of this thesis were to thoroughly examine the JRS business model, observe the competitive environment and detect future market opportunities. After identification of arising challenges, innovative approaches to achieve a competitive advantage within this niche industry were illustrated. Financ...

Proceedings of the international specialist meeting on BWR-pressure suppression containment technology. Vol. 1

International Nuclear Information System (INIS)

Schultheiss, G.F.

1981-01-01

In the frame of R + D-work for BWR-pressure suppression systems the GKSS-Forschungszentrum Geesthacht GmbH organized an international specialist meeting. All important safety relevant aspects of pressure suppression system technology have been included. About 60 experts from USA, Japan, Sweden, Italy, Netherlands and the Federal Republic of Germany participated. They came from licensing authorities, vendors, research centers and universities. In 24 papers they have shown the world-wide present status of theoretical and experimental know-how on pressure suppression system behaviour. In discussions and working groups recommendations for future work have been compiled. (orig.) [de

Proceedings of the international specialist meeting on BWR-pressure suppression containment technology. Vol. 2

International Nuclear Information System (INIS)

Schultheiss, G.F.

1981-01-01

In the frame of R + D-work for BWR-pressure suppression systems the GKSS-Forschungszentrum Geesthacht GmbH organized an international specialist meeting. All important safety relevant aspects of pressure suppression system technology have been included. About 60 experts from USA, Japan, Sweden, Italy, Netherland and the Federal Republic of Germany participated. They came from licensing authorities, vendors, research centers and universities. In 24 papers they have shown the world-wide present status of theoretical and experimental know-how on pressure suppression system behaviour. In discussions and working groups recommendations for future work have been compiled. (orig.) [de

Institute of Energy and Climate Research IEK-6. Nuclear waste management and reactor safety report 2009/2010. Material science for nuclear waste management

International Nuclear Information System (INIS)

Klinkenberg, M.; Neumeier, S.; Bosbach, D.

2011-01-01

Due to the use of nuclear energy about 17.000 t (27.000 m 3 ) of high level waste and about 300.000 m 3 of low and intermediated level waste will have accumulated in Germany until 2022. Research in the Institute of Energy and Climate Research (IEK-6), Nuclear Waste Management and Reactor Safety Division focuses on fundamental and applied aspects of the safe management of nuclear waste - in particular the nuclear aspects. In principle, our research in Forschungszentrum Juelich is looking at the material science/solid state aspects of nuclear waste management. It is organized in several research areas: The long-term safety of nuclear waste disposal is a key issue when it comes to the final disposal of high level nuclear waste in a deep geological formation. We are contributing to the scientific basis for the safety case of a nuclear waste repository in Germany. In Juelich we are focusing on a fundamental understanding of near field processes within a waste repository system. The main research topics are spent fuel corrosion and the retention of radionuclides by secondary phases. In addition, innovative waste management strategies are investigated to facilitate a qualified decision on the best strategy for Germany. New ceramic waste forms for disposal in a deep geological formation are studied as well as the partitioning of long-lived actinides. These research areas are supported by our structure research group, which is using experimental and computational approaches to examine actinide containing compounds. Complementary to these basic science oriented activities, IEK-6 also works on rather applied aspects. The development of non-destructive methods for the characterisation of nuclear waste packages has a long tradition in Juelich. Current activities focus on improving the segmented gamma scanning technique and the prompt gamma neutron activation analysis. Furthermore, the waste treatment group is developing concepts for the safe management of nuclear graphite

Institute of Energy and Climate Research IEK-6. Nuclear waste management and reactor safety report 2009/2010. Material science for nuclear waste management

Energy Technology Data Exchange (ETDEWEB)

Klinkenberg, M; Neumeier, S; Bosbach, D [eds.

2011-07-01

Due to the use of nuclear energy about 17.000 t (27.000 m{sup 3}) of high level waste and about 300.000 m{sup 3} of low and intermediated level waste will have accumulated in Germany until 2022. Research in the Institute of Energy and Climate Research (IEK-6), Nuclear Waste Management and Reactor Safety Division focuses on fundamental and applied aspects of the safe management of nuclear waste - in particular the nuclear aspects. In principle, our research in Forschungszentrum Juelich is looking at the material science/solid state aspects of nuclear waste management. It is organized in several research areas: The long-term safety of nuclear waste disposal is a key issue when it comes to the final disposal of high level nuclear waste in a deep geological formation. We are contributing to the scientific basis for the safety case of a nuclear waste repository in Germany. In Juelich we are focusing on a fundamental understanding of near field processes within a waste repository system. The main research topics are spent fuel corrosion and the retention of radionuclides by secondary phases. In addition, innovative waste management strategies are investigated to facilitate a qualified decision on the best strategy for Germany. New ceramic waste forms for disposal in a deep geological formation are studied as well as the partitioning of long-lived actinides. These research areas are supported by our structure research group, which is using experimental and computational approaches to examine actinide containing compounds. Complementary to these basic science oriented activities, IEK-6 also works on rather applied aspects. The development of non-destructive methods for the characterisation of nuclear waste packages has a long tradition in Juelich. Current activities focus on improving the segmented gamma scanning technique and the prompt gamma neutron activation analysis. Furthermore, the waste treatment group is developing concepts for the safe management of nuclear

An overview of the severe accident research activities within the LACOMERA platform at the Forschungszentrum Karlsruhe

International Nuclear Information System (INIS)

Miassoedov, A.; Alsmeyer, H.; Meyer, L.; Steinbrueck, M.; Tromm, W.

2006-01-01

The LACOMERA project at the Forschungszentrum Karlsruhe, Germany, is a 4 year action within the 5th Framework Programme of the EU which started in September 2002. Overall objective of the project is to offer research institutions from the EU member countries and associated states access to four large-scale experimental facilities QUENCH, LIVE, DISCO, and COMET. These facilities can be used to investigate core melt scenarios from the beginning of core degradation to melt formation and relocation in the vessel, possible melt dispersion to the reactor cavity, and finally corium concrete interaction and corium coolability in the reactor cavity. The paper summarises the main results obtained in the following experiments performed up to now. QUENCH-L1: Impact of air ingression on core degradation. The test provides unique data for the investigation of air ingress phenomenology in conditions as representative of a spent fuel pool accident as possible; QUENCH-L2: Boil-off of a flooded bundle. The test is of a generic interest for all reactor types, provided a link between the severe accident and design basis areas, and would deliver oxidation and thermal hydraulic data at high temperatures. DISCO-L1: Thermal hydraulic behaviour of the corium melt dispersion neglecting the chemical effects such as hydrogen generation and combustion. COMET-L1: Long-term 2D concrete ablation in a siliceous concrete cavity at intermediate decay heat power level with a top flooding phase after a phase of dry concrete erosion. COMET-L2: Investigation of long-term melt-concrete interaction of metallic corium in a cylindrical siliceous concrete cavity under dry conditions with decay heat simulation of intermediate power during the first test phase, and subsequently at reduced power during the second test phase. (author)

75 FR 71371 - Airworthiness Directives; Thielert Aircraft Engines GmbH Models TAE 125-01, TAE 125-02-99, and...

Science.gov (United States)

2010-11-23

... Engines GmbH Models TAE 125-01, TAE 125-02-99, and TAE 125-02-114 Reciprocating Engines AGENCY: Federal... Engines GmbH models TAE 125-01, TAE 125-02-99, and TAE 125-02-114 reciprocating engines installed in, but..., Operation & Maintenance Manual OM- 01-02, Issue 3, Revision 13. (ii) For TAE 125-02-99 and TAE 125-02-114...

76 FR 17757 - Airworthiness Directives; Thielert Aircraft Engines GmbH Models TAE 125-01, TAE 125-02-99, and...

Science.gov (United States)

2011-03-31

... Airworthiness Directives; Thielert Aircraft Engines GmbH Models TAE 125-01, TAE 125-02-99, and TAE 125-02-114.... Applicability (c) This AD applies to Thielert Aircraft Engines GmbH models TAE 125-01, TAE 125-02-99, and TAE...) For TAE 125-02-99 and TAE 125-02-114 engines, Operation & Maintenance Manual OM-02-02, Version 2...

Framatome ANP GmbH concept of Plant Life Management (PLIM)

International Nuclear Information System (INIS)

Daeuwel, W.; Biemann, W.; Danisch, R.; Kastner, B.; Meyer, W.; Nopper, H.; Waas, U.; Warnken, L.

2002-01-01

The deregulation of the power generation industry has resulted in increased competitive pressure and is forcing operators to improve plant operating economy while maintaining high levels of plant safety. A key factor to meeting this challenge is to apply a comprehensive plant life management (PLIM) approach which addresses all relevant ageing and degradation mechanisms regarding the safety concept, plant component structures and documentation, plant personnel, consumables, operations management system and administrative controls. For this reason, Framatome ANP GmbH has developed an integrated PLIM concept applicable for both new and operating plants and focusing on the safety concept, plant component structures and documentation. (orig.)

76 FR 31457 - Airworthiness Directives; Diamond Aircraft Industries GmbH Model DA 42 Airplanes

Science.gov (United States)

2011-06-01

... Airworthiness Directives; Diamond Aircraft Industries GmbH Model DA 42 Airplanes AGENCY: Federal Aviation... reportedly found on DA 42 Main Landing Gear (MLG) Damper-to-Trailing Arm joints during standard maintenance... DA 42 Main Landing Gear (MLG) Damper-to-Trailing Arm joints during standard maintenance. Depending on...

GKSS annual report 1987

International Nuclear Information System (INIS)

1988-01-01

GKSS-Forschungszentrum Geesthacht GmbH, one of the national research centers, carries out R and D work on conservation of resources and environment, improvement of working conditions and on increase of economic competitiveness. The activities fall into the fields energy research and technology, basic technologies, marine research and techniques, health-environment-biotechnology. The annual report contains selected research work in summaries, the report on R and D work in reactor safety, materials research, environmental and climate research as well as environmental, and underwater techniques, describes the research institutes, cooperation with external partners, the organization, the budget, personnel, publications, including patent applications, and lectures. (HK) [de

76 FR 14346 - Airworthiness Directives; Diamond Aircraft Industries GmbH Model DA 42 Airplanes

Science.gov (United States)

2011-03-16

... Industries GmbH Model DA 42 Airplanes AGENCY: Federal Aviation Administration (FAA), Department of... been reportedly found on DA 42 Main Landing Gear (MLG) Damper-to-Trailing Arm joints during standard... condition for the specified products. The MCAI states: Cracks have been reportedly found on DA 42 Main...

The quasi-free reaction p+d → d+η+p{sub sp} at ANKE

Energy Technology Data Exchange (ETDEWEB)

Schroeer, Daniel; Fritzsch, Christopher; Khoukaz, Alfons; Rump, Marcel [Institut fuer Kernphysik, Westfaelische Wilhelms-Universitaet, Muenster (Germany); Collaboration: ANKE-Collaboration

2016-07-01

The interaction between η mesons and hadrons is an intensively investigated topic. Due to its stength it might lead to the formation of η-mesic nuclei. In order to study the characteristics of this interaction a measurement of the reaction p+d → d+η+p{sub sp} has been performed at the ANKE spectrometer at the COSY accelerator of the Forschungszentrum Juelich. In this context the deuteron serves as an effective neutron target whereas the proton is treated as a spectator particle. The two different beam momenta (p{sub 1} = 2.09 GeV/c and p{sub 2} = 2.25 GeV/c) in combination with the Fermi motion inside the target deuteron grant access to the determination of total and differential cross sections in an excess energy range from threshold up to Q = 90 MeV. While the course of the total cross section, especially near threshold, will allow to compute the scattering length a{sub dη} of an s-wave final state interaction ansatz, the differential cross sections permit to verify the legitimacy of the s-wave assumption. Furthermore the data taken at higher excess energies enable to examine the role of nucleonic resonances in the production process of η mesons. Recent results are presented and discussed.

Prestressed cast iron pressure vessels as burst-proof pressure vessels for innovative nuclear applications

International Nuclear Information System (INIS)

Froehling, W.; Boettcher, A.; Bounin, D.; Steinwarz, W.; Geiss, M.; Trauth, M.

2000-01-01

The amendment to the German Atomic Energy Act from July 28, 1994 requires that events 'whose occurrence is practically excluded by the measures against damages', i.e. events of the category residual risk, must not necessitate far reaching protective measures outside the plant. For a conventional reactor pressure vessel, the residual risk consists in the very small probability of a catastrophic failure (formation of a large fracture opening, bursting of the vessel). With a prestressed cast iron vessel (PCIV), the formation of a large fracture opening or bursting of the vessel, respectively, is impossible due to its design properties. Against this background the possibility of the use of this type of pressure vessel for lightwater reactors has been studied in the frame of a 'Working Group for Innovative Nuclear Technology', founded by different research institutes and industrial companies. Furthermore, it has been studied whether the use of the PCIV support the realization of a corecatcher system. The results are presented in this report. Already many years earlier, Siempelkamp has performed industrial development and Forschungszentrum Juelich related experimental and theoretical safety research for the PCIV as an innovative, bust-proof pressure vessel concept. This development of the PCIV as well as its safety properties are also presented in a conclusive manner. (orig.) [de

Development and demonstration of a new SANEX Partitioning Process for selective actinide(III)/lanthanide(III) separation using a mixture of CyMe{sub 4}BTBP and TODGA

Energy Technology Data Exchange (ETDEWEB)

Modolo, G.; Wilden, A.; Daniels, H. [Forschungszentrum Juelich GmbH (Germany). Institute for Energy and Climate Research, IEK-6, Nuclear Waste Management and Reactor Safety; Geist, A.; Magnusson, D. [Karlsruher Institut fuer Technologie, Karlsruhe (Germany). Inst. fuer Nukleare Entsorgung; Malmbeck, R. [European Commission, JRC, Karlsruhe (Germany). Inst. for Transuranium Elements (ITU)

2013-05-01

Within the framework of the European collaborative project ACSEPT, a new SANEX partitioning process was developed at Forschungszentrum Juelich for the separation of the trivalent minor actinides americium, curium and californium from lanthanide fission products in spent nuclear fuels. The development is based on batch solvent extraction studies, single-centrifugal contactor tests and on flow-sheet design by computer code calculations. The used solvent is composed of 6,6{sup '}-bis(5,5,8,8-tetramethyl-5,6,7,8-tetrahydrobenzo-[1,2-4]trizazin-3-yl)-[2,2{sup '}]-bipyridine (CyMe{sub 4}BTBP) and N,N,N{sup '},N{sup '}-tetraoctyldiglycolamide (TODGA) dissolved in n-octanol. A spiked continuous counter-current test was carried out in miniature centrifugal contactors with the aid of a 20-stage flow-sheet consisting of 12 extraction, 4 scrubbing and 4 stripping stages. A product fraction containing more than 99.9% of the trivalent actinides Am(III), Cm(III) and Cf(III) was obtained. High product/feed decontamination factors >1000 were achieved for these actinides. The trivalent lanthanides were directed to the raffinate of the process with the actinide (III) product stream being contaminated with less than 0.5 mass-% in the initial lanthanides. (orig.)

Radioactive waste products 2002 (RADWAP 2002). Proceedings

International Nuclear Information System (INIS)

Odoj, R.; Baier, J.; Brennecke, P.; Kuehn, K.

2003-01-01

The 4 th International Seminar on Radioactive Waste Products was organised by the Forschungszentrum Juelich in co-operation with the Bundesamt fuer Strahlenschutz and the European Commission. On behalf of the Bundesamt, I would like to welcome all participants of this scientific-technical meeting. I very much appreciate the participation not only of numerous German scientists, engineers and technicians as well as governmental and industrial representatives, but would particularly express my gratitude for the participation of many colleagues from abroad. Radioactive waste management and disposal is a worldwide issue and international co-operation to support national programmes is therefore much appreciated. The international organisations provide, among other things, guidance to member countries on safe, economic and environmentally acceptable solutions for radioactive waste disposal. On a national basis respective programmes are developed, modified or successfully realized. Nevertheless, the challenge of radioactive waste management and disposal is no longer a scientific and technical exclusivity. The importance of ethical and social aspects, the dialogue with the public and transparency in decision-making processes increase more and more. Thus, when addressing safety-related key questions one needs to be as open as possible on scientific-technical aspects and to consider the involvement of the public requiring a clear, open-minded and transparent communication. (orig.)

TBCs for Gas Turbines under Thermomechanical Loadings: Failure Behaviour and Life Prediction

Directory of Open Access Journals (Sweden)

Herzog R.

2012-10-01

Full Text Available The present contribution gives an overview about recent research on a thermal barrier coating (TBC system consisted of (i an intermetallic MCrAlY-alloy Bondcoat (BC applied by vacuum plasma spraying (VPS and (ii an Yttria Stabilised Zirconia (YSZ top coat air plasma sprayed (APS at Forschungszentrum Juelich, Institute of Energy and Climate Research (IEK-1. The influence of high temperature dwell time, maximum and minimum temperature on crack growth kinetics during thermal cycling of such plasma sprayed TBCs is investigated using infrared pulse thermography (IT, acoustic emission (AE analysis and scanning electron microscopy. Thermocyclic life in terms of accumulated time at maximum temperature decreases with increasing high temperature dwell time and increases with increasing minimum temperature. AE analysis proves that crack growth mainly occurs during cooling at temperatures below the ductile-to-brittle transition temperature of the BC. Superimposed mechanical load cycles accelerate delamination crack growth and, in case of sufficiently high mechanical loadings, result in premature fatigue failure of the substrate. A life prediction model based on TGO growth kinetics and a fracture mechanics approach has been developed which accounts for the influence of maximum and minimum temperature as well as of high temperature dwell time with good accuracy in an extremely wide parameter range.

Department of Nuclear Reactions - Overview

International Nuclear Information System (INIS)

Nowicki, L.

2006-01-01

In 2005 the Department held a steady course. Topics of nuclear physics, atomic physics and materials research that started in previous years were continued. Although our team was smaller than years ago, the scientific activity, estimated by number of published papers is still very high. Scientists of the Department are co-authors or authors of more than 50 papers. Nuclear physics, which is our main-stream activity, covered a wide energy range. It started close to the Coulomb barrier, where 6 He breakup on heavy nuclei were studied, and ended at zones of tens of GeV; such high energies were used to investigate spin structure of deuterons and to explore hadron leptoproduction. Traditionally, experimental investigations in the fields of atomic physics and of physics of materials completed the scene. Our old Van de Graaff accelerator Lech was used for studies of M-shell ionisation of heavy elements, for hardening of Ultra-High Molecular Weight Polyethylene and for characterisation of materials with RBS and NRA techniques. The VdG runs perfectly although it is over 40 years old. Two Ph.D. students finished their theses and were promoted. Izabela Fijal's work concerned multi-ionization and intrashell coupling effects for L-shell x-ray emission induced by heavy ions, while Sergiy Mezhevych showed studies on scattering of 11 B from carbon isotopes. It is obvious that contemporary works on physics do not arise in a single lab. Our contributions to many papers were possible due owing to collaborations involving many institutions. Some of them are listed: GSI, Darmstadt (PANDA Collaboration) DESY, Hamburg (HERMES Collaboration) Institut fuer Kernphysik, Forschungszentrum Juelich Forschungszentrum Rossendorf CSNSM, Orsay GANIL, Caen University of Huelva Institute of Nuclear Research, Kiev SLCJ, Warsaw ITME, Warsaw Some of our colleagues traditionally gave lectures and made physical demonstrations on Warsaw informal learning events: 9 th Science Picnic and 9 th Science Festival

Workshop on mesons and mesonic states up to slightly above 1 GeV/c2

International Nuclear Information System (INIS)

Oelert, W.; Sefzick, T.

1991-04-01

The new accelerator COSY-Juelich will provide protons with momenta up to 3.3 GeV/c. Thus an effective mass slightly above 1 GeV/c 2 can be produced in the pp-interaction. Employing higher mass targets also heavier mesons can be observed. The production of single mesons and of mesonic states with and without strangeness can be investgated at COSY. The structure of some mesons in the mass range of 950 McV/c 2 to 1020 MeV/c 2 is still not well understood. While the Φ(1020) at the upper limit of this range is believed to be of rahter pure santi s nature the content of the η'(958) meson at the lower limit of this range is still under discussion. New results suggest that what is called the f o meson (former notation S*) consists in reality of two close and narrow states; one of them being a santi s - quarks configuration while the other should be a flavour singlet which couples to ππ and Kanti K with similar strengths. Also the discussion on possible gluonium candidates is still alive. It is speculated that some of these mesons - till now supposed to have widths of 30 to 50 MeV/c 2 - could rather be an overlay of structures with much smaller widths. Another features of resonances in this region is their partial decay into the Kanti K channel if their actual mass is large enough. Strong decays in Kanti K could be a signal of a Kanti K 'molecular' nature of the resonance. In particular the atomic K + K - structure should exist. In order to have review of the physics related to these problems there was a workshop held on: MESONS and MESONIC STATES up to slightly above 1 GeV/c 2 at the ZEL - Forschungszentrum - Juelich February 19 to 20, 1990. The following contains copies of the shown transparencies and short write-ups as far as available. (orig.)

76 FR 54373 - Airworthiness Directives; Austro Engine GmbH Model E4 Diesel Piston Engines

Science.gov (United States)

2011-09-01

... diesel piston engines, with high-pressure (HP) fuel pump, part number (P/N) E4A- 30-100-000, installed... Airworthiness Directives; Austro Engine GmbH Model E4 Diesel Piston Engines AGENCY: Federal Aviation... pressure supply for excessive oscillations to determine if high-pressure (HP) fuel pumps have been exposed...

Institute of Energy and Climate Research IEK-6. Nuclear waste management and reactor safety report 2009/2010. Material science for nuclear waste management

Energy Technology Data Exchange (ETDEWEB)

Klinkenberg, M.; Neumeier, S.; Bosbach, D. (eds.)

2011-07-01

Due to the use of nuclear energy about 17.000 t (27.000 m{sup 3}) of high level waste and about 300.000 m{sup 3} of low and intermediated level waste will have accumulated in Germany until 2022. Research in the Institute of Energy and Climate Research (IEK-6), Nuclear Waste Management and Reactor Safety Division focuses on fundamental and applied aspects of the safe management of nuclear waste - in particular the nuclear aspects. In principle, our research in Forschungszentrum Juelich is looking at the material science/solid state aspects of nuclear waste management. It is organized in several research areas: The long-term safety of nuclear waste disposal is a key issue when it comes to the final disposal of high level nuclear waste in a deep geological formation. We are contributing to the scientific basis for the safety case of a nuclear waste repository in Germany. In Juelich we are focusing on a fundamental understanding of near field processes within a waste repository system. The main research topics are spent fuel corrosion and the retention of radionuclides by secondary phases. In addition, innovative waste management strategies are investigated to facilitate a qualified decision on the best strategy for Germany. New ceramic waste forms for disposal in a deep geological formation are studied as well as the partitioning of long-lived actinides. These research areas are supported by our structure research group, which is using experimental and computational approaches to examine actinide containing compounds. Complementary to these basic science oriented activities, IEK-6 also works on rather applied aspects. The development of non-destructive methods for the characterisation of nuclear waste packages has a long tradition in Juelich. Current activities focus on improving the segmented gamma scanning technique and the prompt gamma neutron activation analysis. Furthermore, the waste treatment group is developing concepts for the safe management of nuclear

75 FR 68179 - Airworthiness Directives; Austro Engine GmbH Model E4 Diesel Piston Engines

Science.gov (United States)

2010-11-05

... Airworthiness Directives; Austro Engine GmbH Model E4 Diesel Piston Engines AGENCY: Federal Aviation... pumps failed as a result of pressure oscillations in the fuel supply line. We are issuing this AD to.... Analyses have shown that high pressure (HP) fuel pumps failed as a result of pressure oscillations in the...

GKSS annual report 1989

International Nuclear Information System (INIS)

1990-01-01

GKSS-Forschungszentrum Geesthacht GmbH, as a national research center, carries out development work on behalf of the Federal Government's research and technology policy in order to deepen scientific knowledge, conserve resources and environment, improve living and working conditions, and increase economic efficiency and competitiveness. The center carries out work on energy research and energy technology, basic technologies, marine research and techniques, health-environment-biotechnology. The annual report contains in summary selected research work, the report on R and D activities in reactor safety, materials, environment and climate, underwater and environmental techniques. The research institutes, cooperation with external partners, the organization, budget, personnel, publications, including patent applications, and lectures are described. (HK) [de

International HTR activities

International Nuclear Information System (INIS)

Baust, E.; Weisbrodt, I.

1989-01-01

Asea Brown Boveri AG (ABB) and their subsidiary High Temperature Reactor Construction GmbH (HRB) have brought the pebble bed high temperature reactor to the edge of being ready for the market with the construction and operation of the AVR reactor at Juelich and the THTR 300 at Hamm-Uentrop. Siemens/Interatom have developed the HTR modular concept and, together with their partners HRB, KFA, Rheinbraun Bergbauforschung have taken the nuclear process heat project to its present advanced state of development. The further introduction of the HTR to the market is a long-term objective, due to the present market situation. ABB and Siemens AG have therefore agreed to collaborate by forming a joint company. (orig.)

Nuclear safety research in HGF 2012

International Nuclear Information System (INIS)

Anon.

2013-01-01

Nuclear Competence Association. The Forschungszentrum Juelich GmbH, HZDR Helmholtz-Zentrum Dresden-Rossendorf and the KIT Karlsruhe Institute of Technology are involved in the Nuclear Safety Research Program within the Helmholtz Association. The work and results in 2012 are presented. (orig.)

Fuel cells science and engineering. Materials, processes, systems and technology. Vol. 1

Energy Technology Data Exchange (ETDEWEB)

Stolten, Detlef; Emonts, Bernd (eds.) [Forschungszentrum Juelich GmbH (DE). Inst. fuer Energieforschung (IEF), Brennstoffzellen (IEF-3)

2012-07-01

The first volume is divided in four parts and 22 chapters. It is structured as follows: PART I: Technology. Chapter 1: Technical Advancement of Fuel-Cell Research and Development (Dr. Bernd Emonts, Ludger Blum, Thomas Grube, Werner Lehnert, Juergen Mergel, Martin Mueller and Ralf Peters); 2: Single-Chamber Fuel Cells (Teko W. Napporn and Melanie Kuhn); 3: Technology and Applications of Molten Carbonate Fuel Cells (Barbara Bosio, Elisabetta Arato and Paolo Greppi); 4: Alkaline Fuel Cells (Erich Guelzow); 5: Micro Fuel Cells (Ulf Groos and Dietmar Gerteisen); 6: Principles and Technology of Microbial Fuel Cells (Jan B. A. Arends, Joachim Desloover, Sebastia Puig and Willy Verstraete); 7: Micro-Reactors for Fuel Processing (Gunther Kolb); 8: Regenerative Fuel Cells (Martin Mueller). PART II: Materials and Production Processes. Chapter 9: Advances in Solid Oxide Fuel Cell Development between 1995 and 2010 at Forschungszentrum Juelich GmbH, Germany (Vincent Haanappel); 10: Solid Oxide Fuel Cell Electrode Fabrication by Infiltration (Evren Gunen); 11: Sealing Technology for Solid Oxide Fuel Cells (K. Scott Weil); 12: Phosphoric Acid, an Electrolyte for Fuel Cells - Temperature and Composition Dependence of Vapor Pressure and Proton Conductivity (Carsten Korte); 13: Materials and Coatings for Metallic Bipolar Plates in Polymer Electrolyte Membrane Fuel Cells (Heli Wang and John A. Turner); 14: Nanostructured Materials for Fuel Cells (John F. Elter); 15: Catalysis in Low-Temperature Fuel Cells - An Overview (Sabine Schimpf and Michael Bron). PART III: Analytics and Diagnostics. Chapter 16: Impedance Spectroscopy for High-Temperature Fuel Cells (Ellen Ivers-Tiffee, Andre Leonide, Helge Schichlein, Volker Sonn and Andre Weber); 17: Post-Test Characterization of Solid Oxide Fuel-Cell Stacks (Norbert H. Menzler and Peter Batfalsky); 18: In Situ Imaging at Large-Scale Facilities (Christian Toetzke, Ingo Manke and Werner Lehnert); 19: Analytics of Physical Properties of Low

Study on partitioning and transmutation (P and T) of high-level waste. Status of R and D. Final report; Studie zur Partitionierung und Transmutation (P and T) hochradioaktiver Abfaelle. Stand der Grundlagen- und technologischen Forschung. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Merk, Bruno; Glivici-Cotruta, Varvara

2014-07-01

The main project, where this sub project contributed to, has been structured into two modules: module A (funded by the federal ministry of economics, managed by KIT) and module B (funded by the federal ministry of education and research, managed by acatech). Partners in module A were DBE TECHNOLOGY GmbH, the Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH (GRS), the Helmholtz-Zentrum Dresden-Rossendorf (HZDR), the Karlsruher Institute of Technology (KIT) and the Rheinisch-Westfaelische Technische Hochschule (RWTH) Aachen, in co-operation with the Forschungszentrum Juelich (FZJ). Modul B has been executed by the Zentrum fuer Interdisziplinaere Risiko- und Innovationsforschung der Universitaet Stuttgart (ZIRIUS). The overall coordination has been carried out by the Deutsche Akademie der Technikwissenschaften (acatech). The social implications have been evaluated in module B based on the analysis of the scientific and technological aspects in module A. Recommendations for communication and actions to be taken for the future positioning of P and T have been developed. In the project part, coordinated by HZDR - status of R and D - an overview on the whole topic P and T is given. The topic is opened by a short description of reactor systems possible for transmutation. In the following the R and D status of separation technologies, safety technology, accelerator technology, liquid metal technology, spallation target development, transmutation fuel and structural material development, as well as waste conditioning is described. The topic is completed by the specifics of transmutation systems, the basic physics and core designs, the reactor physics, the simulation tools and the development of Safety Approaches. Additionally, the status of existing irradiation facilities with fast neutron spectrum is described. Based on the current R and D status, the research and technology gaps in the topics: separation and conditioning, accelerator and spallation target, and reactor

Study on partitioning and transmutation (P and T) of high-level waste. Status of R and D. Final report

International Nuclear Information System (INIS)

Merk, Bruno; Glivici-Cotruta, Varvara

2014-01-01

The main project, where this sub project contributed to, has been structured into two modules: module A (funded by the federal ministry of economics, managed by KIT) and module B (funded by the federal ministry of education and research, managed by acatech). Partners in module A were DBE TECHNOLOGY GmbH, the Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH (GRS), the Helmholtz-Zentrum Dresden-Rossendorf (HZDR), the Karlsruher Institute of Technology (KIT) and the Rheinisch-Westfaelische Technische Hochschule (RWTH) Aachen, in co-operation with the Forschungszentrum Juelich (FZJ). Modul B has been executed by the Zentrum fuer Interdisziplinaere Risiko- und Innovationsforschung der Universitaet Stuttgart (ZIRIUS). The overall coordination has been carried out by the Deutsche Akademie der Technikwissenschaften (acatech). The social implications have been evaluated in module B based on the analysis of the scientific and technological aspects in module A. Recommendations for communication and actions to be taken for the future positioning of P and T have been developed. In the project part, coordinated by HZDR - status of R and D - an overview on the whole topic P and T is given. The topic is opened by a short description of reactor systems possible for transmutation. In the following the R and D status of separation technologies, safety technology, accelerator technology, liquid metal technology, spallation target development, transmutation fuel and structural material development, as well as waste conditioning is described. The topic is completed by the specifics of transmutation systems, the basic physics and core designs, the reactor physics, the simulation tools and the development of Safety Approaches. Additionally, the status of existing irradiation facilities with fast neutron spectrum is described. Based on the current R and D status, the research and technology gaps in the topics: separation and conditioning, accelerator and spallation target, and reactor

Nuclear safety research in HGF 2012; Fortschrittsbericht 2012. Programm 'Nukleare Sicherheitsforschung' Helmholtz-Gemeinschaft

Energy Technology Data Exchange (ETDEWEB)

Anon.

2013-06-15

in the Nuclear Competence Association. The Forschungszentrum Juelich GmbH, HZDR Helmholtz-Zentrum Dresden-Rossendorf and the KIT Karlsruhe Institute of Technology are involved in the Nuclear Safety Research Program within the Helmholtz Association. The work and results in 2012 are presented. (orig.)

Cooperation of the private companies Groupe Intra and Kerntechnische Hilfsdienst GmbH

International Nuclear Information System (INIS)

Dumas, J.; Neumann, W.

1999-01-01

For supporting companies running nuclear power plants and for eliminating the effects of an accident, Kerntechnischer Hilfsdienst GmbH (KHG) was founded in Germany in 1977 whereas Groupe Intra (GIE) was founded in France 1988. Since the activities and responsibilities of the two companies are partly the same, they got into contact rather early, at that time with the intention to exchange experience. However, in 1993 the intensified contact resulted in signing an agreement on mutual assistance. In the following passage, a general idea is given of both organisations, the agreement on mutual assistance and the experience of cooperation they have had so far. (orig.) [de

Sales controlling comes into view. MIS (management information system) Deutschland GmbH fits energy suppliers; Vertriebscontrolling in Sicht. MIS Deutschland GmbH macht Energieversorger fit

Energy Technology Data Exchange (ETDEWEB)

Anon.

2002-03-01

MIS has integrated Microsoft-Excel efficiently, so appliers must not change other systems, can utilize advantages and know how and further functionalities like optimization of planning processes, automation of data processing, generation of a data base with structured information of energy data are available for customers.(GL) [German] Die MIS Deutschland GmbH wurde 1988 gegruendet. Die Gruender waren Studenten der Universitaet Darmstadt. Einer von ihnen ist noch heute Vorstandsvorsitzender der MIS AG. Schon damals hatte man die Vision, Manager oder die Entscheidungstraeger in Unternehmen mit Informationen zu versorgen und in die Lage zu versetzen, diese auch nach ihren Beduerfnissen auswerten, analysieren und reporten zu koennen. Dadurch entstand 1988 in Zusammenarbeit mit Microsoft die erste Microsoft-Excel-Konferenz in Deutschland. MIS hat Microsoft-Excel leistungsfaehig integriert, sodass der Anwender nicht auf ein anderes System umlernen muss, sondern die Vorteile und das Know-how Weiterverwenden kann und zusaetzlich weitere Funktionalitaeten zur Verfuegung gestellt bekommt. (orig.)

76 FR 54145 - Airworthiness Directives; 328 Support Services GmbH (Type Certificate Previously Held by AvCraft...

Science.gov (United States)

2011-08-31

... Services GmbH, Global Support Center, P.O. Box 1252, D-82231 Wessling, Federal Republic of Germany... of this AD introduce pre-flight operational tests of the warning system modification, along with abnormal procedures that provide guidance to the flightcrew in the event of various potential warning...

A review of the demonstration of innovative solvent extraction processes for the recovery of trivalent minor actinides from PUREX raffinate

International Nuclear Information System (INIS)

Modolo, G.; Wilden, A.; Geist, A.; Magnusson, D.; Malmbeck, R.

2012-01-01

The selective partitioning (P) of long-lived minor actinides from highly active waste solutions and their transmutation (T) to short-lived or stable isotopes by nuclear reactions will reduce the long-term hazard of the high-level waste and significantly shorten the time needed to ensure their safe confinement in a repository. The present paper summarizes the on-going research activities at Forschungszentrum Juelich (FZJ), Karlsruher Institut fuer Technologie (KIT) and Institute for Transuranium Elements (ITU) in the field of actinide partitioning using innovative solvent extraction processes. European research over the last few decades, i.e. in the NEWPART, PARTNEW and EUROPART programmes, has resulted in the development of multi-cycle processes for minor actinide partitioning. These multi-cycle processes are based on the co-separation of trivalent actinides and lanthanides (e.g. by the DIAMEX process), followed by the subsequent actinide(III)/lanthanide(III) group separation in the SANEX process. The current direction of research for the development of innovative processes within the recent European ACSEPT project is discussed additionally. This paper is focused on the development of flow-sheets for recovery of americium and curium from highly active waste solutions. The flow-sheets are verified by demonstration processes, in centrifugal contactors, using synthetic or genuine fuel solutions. The feasibility of the processes is also discussed. (orig.)

Results of the first tests measurements using the prototype trigger-less data acquisition for the anti PANDA experiment

Energy Technology Data Exchange (ETDEWEB)

Wagner, Milan; Gessler, Thomas; Kuehn, Wolfgang; Lange, Soeren; Spruck, Bjoern; Werner, Marcel [JLU Giessen (Germany); Collaboration: PANDA-Collaboration

2015-07-01

The anti PANDA detector will be a located at the high energy storage ring (HESR), at the facility for anti protons and ion research (FAIR) in Darmstadt, Germany. It will operate with a very high average interaction rate of about 20 MHz, in a free streaming mode without hardware trigger. Instead of triggering, data filtering will be performed by complete online event reconstruction with a highly parallelized farm of FPGAs as first level and on a farm of GPUs or PCs as a second level. The requirement is a background reduction by a factor of >1000. Parts of the anti PANDA detector will be pre-assembled and tested at the Forschungszentrum Juelich, before being transported to GSI at a later stage. A prototype trigger-less data acquisition (PTDAQ) will be used during this phase. The main component of the PTDAQ is the Compute Nodes (CN), a xTCA-compliant board based on a Virtex-5 FX70T FPGA, with a μTCA-formfactor. Synchronization is done via a Synchronization Of Data Acquisition (SODA) source. Parts of the functionality were tested in a setup using a 210 MeV electrons beam with a rate of 1 MHz at the Mainz Microtron. In this contribution, we present the first results of test measurements using the PTDAQ system.

Measurement of permanent electric dipole moments of charged hadrons in storage rings

Energy Technology Data Exchange (ETDEWEB)

Pretz, Joerg, E-mail: pretz@physik.rwth-aachen.de [III. Physikalisches Institut (Germany); Collaboration: JEDI Collaboration

2013-03-15

Permanent Electric Dipole Moments (EDMs) of elementary particles violate two fundamental symmetries: time reversal invariance ( T ) and parity ( P ). Assuming the CPT theorem this implies CP violation. The CP violation of the Standard Model is orders of magnitude too small to be observed experimentally in EDMs in the foreseeable future. It is also way too small to explain the asymmetry in abundance of matter and anti-matter in our universe. Hence, other mechanisms of CP violation outside the realm of the Standard Model are searched for and could result in measurable EDMs. Up to now most of the EDM measurements were done with neutral particles. With new techniques it is now possible to perform dedicated EDM experiments with charged hadrons at storage rings where polarized particles are exposed to an electric field. If an EDM exists the spin vector will experience a torque resulting in change of the original spin direction which can be determined with the help of a polarimeter. Although the principle of the measurement is simple, the smallness of the expected effect makes this a challenging experiment requiring new developments in various experimental areas. Complementary efforts to measure EDMs of proton, deuteron and light nuclei are pursued at Brookhaven National Laboratory and at Forschungszentrum Juelich with an ultimate goal to reach a sensitivity of 10{sup - 29}e{center_dot}cm.

THE MARKET POTENTIAL FOR ELECTRONIC PAYMENT APPLICATIONS IN GHANA AND UGANDA. CASE COMPANY– MAVIANCE GMBH

OpenAIRE

Terekhova, Mariia

2016-01-01

Nowadays, electronic payment solutions are widespread all around the world. Besides, their popularity is rapidly growing in emerging markets bringing numerous business opportunities to the international companies specializing in electronic payment systems. The aim of this thesis is to create a marketing strategy for the penetration of Ghana and Uganda with Smobilpay, which is an electronic payment application of Maviance GmbH. The research is done with the help of an analysis of the busin...

Community-oriented support and research structures

Energy Technology Data Exchange (ETDEWEB)

Attig, Norbert; Eickermann, Thomas; Gibbon, Paul; Lippert, Thomas, E-mail: th.lippert@fz-juelich.d [Institute for Advanced Simulation, Juelich Supercomputing Centre, Forschungszentrum Juelich, 52425 Juelich (Germany)

2009-07-01

Coordinated by the Partnership for Advanced Computing in Europe (PRACE) Europe is restructuring and strengthening its high-performance computing infrastructure with the aim to create a model HPC ecosystem. At the tip of the pyramid, up to six centres are envisaged that will operate systems of the highest performance class. The HPC Research Infrastructure (HPC-RI) will comprise European, national and regional centres. Science communities are integral partners, strong links will include Grid and Cloud users. The HPC-RI strives at providing scientists all over Europe, on the one hand, with unlimited and independent access to state-of-the-art computer resources in all performance classes and, on the other hand, with a world-class pan-European competence and support network. While the hardware-oriented buildup of the infrastructure is making progress, high-quality user support and software development in the upcoming era of unprecedented parallelism and exascale on the horizon have become the imminent challenges. This has been clearly recognized by the European Commission, who will issue calls for proposals to fund petascale software development in summer 2009. Although traditional support structures are well established in Europe's major supercomputing centres, it is questionable if these structures are able to meet the challenges of the future: in general, support structures are based on cross-disciplinary computer science and mathematics teams; disciplinary computational science support usually is given in an ad-hoc, project-oriented manner. In this paper, we describe our approach to establish a suitable support structure-Simulation Laboratories (SL). SLs are currently being established at the Juelich Supercomputing Centre of the Forschungszentrum Juelich (FZJ) and at the Steinbuch Centre for Computing (SCC) of the Karlsruhe Institute for Technology (KIT) in Germany. While SLs are community-oriented, i.e. each SL focusses on a specific community, they are

Investigation of hydrogen recombination under natural convection conditions; Untersuchungen zur Wasserstoffrekombination unter Naturkonvektionsbedingungen

Energy Technology Data Exchange (ETDEWEB)

Simon, Berno

2015-09-04

Passive Autocatalytic Recombiners (PAR) are installed inside the containment of nuclear power plants in order to prevent the build-up of flammable mixtures and to mitigate the effects of hydrogen deflagrations, which can occur in the event of a severe accident combined with the release of hydrogen. In order to simulate the operating behaviour of PARs, the computer program REKO-DIREKT is being developed at the Forschungszentrum Juelich in collaboration with the Institute for Reactor Safety and Reactor Technology at the RWTH Aachen. For the validation of the code, data from experimental facilities operated at Juelich are used. This work focusses on the analysis of the chimney effect through the PAR housing as well as the optimization of the chimney model of REKO-DIREKT. Therefore experimental investigations are carried out in the REKO-4 facility under natural convection conditions. This facility is equipped with numerous measuring devices, e.g. katharometers for in-situ measuring of the hydrogen concentration and the optical flow measurement technique Particle-Image-Velocimetry. In preliminary assessments the equipment is being qualified in order to determine the measurement accuracy. In the following experimental investigations, a small-scale PAR is used, that is built in a modular way allowing it to be equipped with different chimney geometries. The experimental results produce a database that shows the central correlation between the hydrogen concentration, the catalyst temperature and the inlet velocity. The results include the variation of the recombiner's chimney height and experiments at different operating pressures. After optimization of the chimney model, the simulation program is validated against experiments in the large-scale facility THAI in Eschborn, which have been performed subsequent to this thesis in the context of the OECD/NEA-THAI project. Finally, the influence of a downward-directed, near-wall flow on the operational behaviour of the small

Community-oriented support and research structures

International Nuclear Information System (INIS)

Attig, Norbert; Eickermann, Thomas; Gibbon, Paul; Lippert, Thomas

2009-01-01

Coordinated by the Partnership for Advanced Computing in Europe (PRACE) Europe is restructuring and strengthening its high-performance computing infrastructure with the aim to create a model HPC ecosystem. At the tip of the pyramid, up to six centres are envisaged that will operate systems of the highest performance class. The HPC Research Infrastructure (HPC-RI) will comprise European, national and regional centres. Science communities are integral partners, strong links will include Grid and Cloud users. The HPC-RI strives at providing scientists all over Europe, on the one hand, with unlimited and independent access to state-of-the-art computer resources in all performance classes and, on the other hand, with a world-class pan-European competence and support network. While the hardware-oriented buildup of the infrastructure is making progress, high-quality user support and software development in the upcoming era of unprecedented parallelism and exascale on the horizon have become the imminent challenges. This has been clearly recognized by the European Commission, who will issue calls for proposals to fund petascale software development in summer 2009. Although traditional support structures are well established in Europe's major supercomputing centres, it is questionable if these structures are able to meet the challenges of the future: in general, support structures are based on cross-disciplinary computer science and mathematics teams; disciplinary computational science support usually is given in an ad-hoc, project-oriented manner. In this paper, we describe our approach to establish a suitable support structure-Simulation Laboratories (SL). SLs are currently being established at the Juelich Supercomputing Centre of the Forschungszentrum Juelich (FZJ) and at the Steinbuch Centre for Computing (SCC) of the Karlsruhe Institute for Technology (KIT) in Germany. While SLs are community-oriented, i.e. each SL focusses on a specific community, they are structured

NIC symposium 2012. 25 years HLRZ/NIC. Proceedings

International Nuclear Information System (INIS)

Binder, Kurt

2012-01-01

Stuttgart, and (in Europe) the Partnership for High Performance Computing in Europe (PRACE). In fact, the successful experience of NIC has served as a role model for this joint European effort, which now is hosted by France, Italy and Spain in addition to Germany. Actually, by now 22 of the 27 member states of the EU have joined PRACE in order to profit from the advances that supercomputing offers for basic science and technology. In fact, in the last two years a significant fraction of the supercomputer resources at JSC have been given to PRACE, and have fertilised research on an even broader range of topics. The first PRACE projects have been finished since a couple of months, and very important results can be expected. The John von Neumann Institute for Computing operates on the basis of a cooperation agreement between three research centres of the Helmholtz association, namely Forschungszentrum Juelich, Deutsches Elektronen-Synchrotron (DESY) Hamburg and the Gesellschaft fuer Schwerionenforschung Darmstadt (GSI). A very important ingredient of this research is that these institutions sponsor NIC research groups, where specific knowhow on computer simulation techniques relevant for topical research at supercomputers is developed further. The present volume contains brief reports from these groups; at Juelich the NIC research group devoted to ''Computational Materials Physics'', headed by M. Mueser from the Universitaet des Saarlandes at Saarbruecken, has started its work on April 1st, 2011.

NIC symposium 2012. 25 years HLRZ/NIC. Proceedings

Energy Technology Data Exchange (ETDEWEB)

Binder, Kurt [Mainz Univ. (Germany). Inst. fuer Physik; Muenster, Gernot [Muenster Univ. (Germany). Inst. fuer Theoretische Physik 1; Kremer, Manfred [Forschungszentrum Juelich GmbH (DE). Juelich Supercomputing Centre (JSC)

2012-08-07

and Stuttgart, and (in Europe) the Partnership for High Performance Computing in Europe (PRACE). In fact, the successful experience of NIC has served as a role model for this joint European effort, which now is hosted by France, Italy and Spain in addition to Germany. Actually, by now 22 of the 27 member states of the EU have joined PRACE in order to profit from the advances that supercomputing offers for basic science and technology. In fact, in the last two years a significant fraction of the supercomputer resources at JSC have been given to PRACE, and have fertilised research on an even broader range of topics. The first PRACE projects have been finished since a couple of months, and very important results can be expected. The John von Neumann Institute for Computing operates on the basis of a cooperation agreement between three research centres of the Helmholtz association, namely Forschungszentrum Juelich, Deutsches Elektronen-Synchrotron (DESY) Hamburg and the Gesellschaft fuer Schwerionenforschung Darmstadt (GSI). A very important ingredient of this research is that these institutions sponsor NIC research groups, where specific knowhow on computer simulation techniques relevant for topical research at supercomputers is developed further. The present volume contains brief reports from these groups; at Juelich the NIC research group devoted to ''Computational Materials Physics'', headed by M. Mueser from the Universitaet des Saarlandes at Saarbruecken, has started its work on April 1st, 2011.

NIC symposium 2012. 25 years HLRZ/NIC. Proceedings

Energy Technology Data Exchange (ETDEWEB)

Binder, Kurt [Mainz Univ. (Germany). Inst. fuer Physik; Muenster, Gernot [Muenster Univ. (Germany). Inst. fuer Theoretische Physik 1; Kremer, Manfred (eds.) [Forschungszentrum Juelich GmbH (DE). Juelich Supercomputing Centre (JSC)

2012-08-07

Supercomputing (GCS), an alliance of the three German national supercomputing centres in Juelich, Garching and Stuttgart, and (in Europe) the Partnership for High Performance Computing in Europe (PRACE). In fact, the successful experience of NIC has served as a role model for this joint European effort, which now is hosted by France, Italy and Spain in addition to Germany. Actually, by now 22 of the 27 member states of the EU have joined PRACE in order to profit from the advances that supercomputing offers for basic science and technology. In fact, in the last two years a significant fraction of the supercomputer resources at JSC have been given to PRACE, and have fertilised research on an even broader range of topics. The first PRACE projects have been finished since a couple of months, and very important results can be expected. The John von Neumann Institute for Computing operates on the basis of a cooperation agreement between three research centres of the Helmholtz association, namely Forschungszentrum Juelich, Deutsches Elektronen-Synchrotron (DESY) Hamburg and the Gesellschaft fuer Schwerionenforschung Darmstadt (GSI). A very important ingredient of this research is that these institutions sponsor NIC research groups, where specific knowhow on computer simulation techniques relevant for topical research at supercomputers is developed further. The present volume contains brief reports from these groups; at Juelich the NIC research group devoted to ''Computational Materials Physics'', headed by M. Mueser from the Universitaet des Saarlandes at Saarbruecken, has started its work on April 1st, 2011.

Possibilities of optimizing non-nuclear simulation of pressurized water reactor transients

International Nuclear Information System (INIS)

Silva Filho, E.

1985-01-01

The GKSS-Forschungszentrum Geesthacht GmbH has instituted the concept of a scaled test facility (volume scale factor of 1/100) of a typical PWR of the 1 300 MWe class for the purpose of studying small breaks Loss-of-Coolant Accidents (LOCA) and transients. Having in mind the goal of an optimization of this concept has been choosen a station blackout with and without reactor shutdown and a small break LOCA in a primary loop piping to investigate the thermohydraulic behaviour of the test facility in comparison to the reactor plant. The computer code RELAP 5/MOD 1 has been utilized to compare the test facility behaviour with the reactor plant one. Recommendations are given for minimization of distortions between test facility and reactor plant. (orig./HP) [de

Advanced chemical analysis service for elements, radionuclides and phases

International Nuclear Information System (INIS)

Sansoni, B.

1986-01-01

A review is given on the structure, organisation and performance of the chemical analysis service of the Central Department for Chemical Analysis at the Kernforschungsanlage Juelich GmbH. The research and development programs together with the infrastructure of the Centre afford to analyse almost all stable elements of the periodical table in almost any material. The corresponding chemical analysis service has been organized according to a new modular system of analytical steps. According to this, the most complicated and, therefore, most general case of an analytical scheme for element and radionuclide analysis in any type of material can be differentiated into about 14 different steps, the modules. They are more or less independent of the special problem. The laboratory is designed and organized according to these steps. (orig./PW) [de

Practical tracer investigations of pesticide residues in agricultural ecosystem

International Nuclear Information System (INIS)

Fuehr, F.

1984-01-01

According to the FAO's latest estimates, the world food supply can only be guaranteed if the 1982 agricultural production is increased by approx. 50% by the year 2000. 2/3 of this production increase must be achieved on areas already under cultivation. This means that in addition to balanced mineral fertilization the use of pesticides will have to be intensively continued in order to fully exploit the improved yield potential of the cultivated plants achieved by breeding. The primary research objective is therefore to extend our knowledge of the uptake and effects of pesticides in the plant as well as their persistence in agricultural ecosystems in order to be able to apply them both more efficiently and more safely. The Institute of Radioagronomy at the Kernforschungsanlage Juelich GmbH (Juelich Nuclear Research Centre) is carrying out practical experiments into these problems using 14 C-labelled pesticides under field conditions. In this way statements will become possible on the uptake and residue situation in plants, translocation and metabolism in the soil, the balance in the year of application as well as on the uptake of untreated cultures in the crop rotation. Parallel to this, uptake after leaf spraying or after seed grain treatment is being studied under standardized conditions, as well as for example the mineralization, sorption and fixation of active substances and metabolites in the soil. Results from the past 12 years are being utilized as a basis for an evaluation of the state of knowledge. (orig.)

75 FR 75868 - Airworthiness Directives; Diamond Aircraft Industries GmbH Models DA 40 and DA 40F Airplanes

Science.gov (United States)

2010-12-07

... Airworthiness Directives; Diamond Aircraft Industries GmbH Models DA 40 and DA 40F Airplanes AGENCY: Federal... of the Thielert Engine Owners Group commented that the Model DA 42 has the same door design and the same unsafe condition. He recommended that the AD also apply to the Model DA 42. The FAA has discussed...

Compact methanol reformer test for fuel-cell powered light-duty vehicles

Energy Technology Data Exchange (ETDEWEB)

Emonts, B; Hoehlein, B; Peters, R [Forschungszentrum Juelich GmbH (Germany). Inst. fuer Energieverfahrenstechnik (IEV); Hansen, J B; Joergensen, S L [Haldor Topsoe A/S, Lyngby (Denmark)

1998-03-15

On-board production of hydrogen from methanol based on a steam reformer in connection with the use of low-temperature fuel-cells (PEMFC) is an attractive option as energy conversion unit for light-duty vehicles. A steam reforming process at higher pressures with an external burner offers advantages in comparison to a steam reformer with integrated partial oxidation in terms of total efficiency for electricity production. The main aim of a common project carried out by the Forschungszentrum Juelich (FZJ), Haldor Topsoee A/S (HTAS) and Siemens AG is to design, to construct and to test a steam reformer reactor concept (HTAS) with external catalytic burner (FZJ) as heat source as well as catalysts for heterogeneously catalyzed hydrogen production (HTAS), concepts for gas treatment (HTAS, FZJ) and a low-temperature fuel cell (Siemens). Based on the experimental results obtained so far concerning methanol reformers, catalytic burners and gas conditioning units, our report describes the total system, a test unit and preliminary test results related to a hydrogen production capacity of 50 kW (LHV) and dynamic operating conditions. This hydrogen production system is aimed at reducing the specific weight (<2 kg/kW{sub th} or 4 kg/kW{sub el}) combined with high efficiency for net electricity generation from methanol (about 50%) and low specific emissions. The application of Pd-membranes as gas cleaning unit fulfill the requirements with high hydrogen permeability and low cost of the noble metal. (orig.)

The Only Way Is Up? Match Outcome And Stock Price Reactions Of Borussia Dortmund GmbH & Co. KGaA

DEFF Research Database (Denmark)

Stadtmann, Georg; Ruelke, Jan Christoph

2008-01-01

We use stock market data for Borussia Dortmund GmbH & Co. KGaA - one of the leading German football clubs - for an application of the news model. Due to the specific characteristics of the news generating process, the case of a publicly traded sport club is a very appropriate candidate for testing...

Logistics worldwide for the whole nuclear cycle. Nuclear Cargo + Service GmbH

International Nuclear Information System (INIS)

Geiger, Horst; Schymke, Klaus

2011-01-01

Nuclear Cargo + Service GmbH (NCS) offers logistics worldwide for the whole nuclear cycle to fuel manufacturers, reactor operators, and waste management companies. Transport equipment and interim stores are part of the company's facilities. The firm's Front End unit conducts transnational transports of yellow cake, uranium hexafluoride, and enriched uranium and uranium from reprocessing. In the Back End unit, the company performs worldwide transports of spent fuel elements of research reactors. Another key area of activity is shipment of radioactive waste ranging from low-level waste to HAW (highly active waste generating heat). In its Component Disposal area, NCS offers a variety of transport services up to and including large components, e.g. reactor pressure vessels, both on the road and by rail and ship. NCS operates storage halls of its own for storing radioactive materials including radioactive waste. The technical equipment of NCS comprises a large pool of road and rail transport vehicles as well as a great number of vessels for radioactive materials. (orig.)

75 FR 7996 - Airworthiness Directives; Thielert Aircraft Engines GmbH (TAE) Models TAE 125-01 and TAE 125-02...

Science.gov (United States)

2010-02-23

... Engines GmbH (TAE) Models TAE 125-01 and TAE 125-02-99 Reciprocating Engines Installed in, But Not Limited...-99 engines, initial and repetitive replacements of the PPRV, and installation of a vibration isolator..., we estimate that this proposed AD would affect about 300 TAE 125-01 and TAE 125-02-99 reciprocating...

76 FR 64285 - Airworthiness Directives; Thielert Aircraft Engines GmbH (TAE) Models TAE 125-02-99 and TAE 125...

Science.gov (United States)

2011-10-18

... Engines GmbH (TAE) Models TAE 125-02-99 and TAE 125-01 Reciprocating Engines AGENCY: Federal Aviation... substance. But we have found it necessary to reduce the initial compliance time for TAE 125-02-99 engines... about 370 TAE 125-01 and TAE 125-02-99 reciprocating engines installed on products of U.S. registry. We...

77 FR 57041 - Airworthiness Directives; Thielert Aircraft Engines GmbH Models TAE 125-01, TAE 125-02-99, and...

Science.gov (United States)

2012-09-17

... Engines GmbH Models TAE 125-01, TAE 125-02-99, and TAE 125-02-114 Reciprocating Engines AGENCY: Federal... Models TAE 125-01, TAE 125-02-99, and TAE 125-02-114 Reciprocating Engines. The existing AD currently... TAE 125-01, TAE 125-02-99, and TAE 125-02-114 reciprocating engines installed in, but not limited to...

Joining of zirconia mechanically metallized with titanium União de zircônia mecanicamente metalizada com titânio

Directory of Open Access Journals (Sweden)

J. S. Pimenta

2010-07-01

Full Text Available Direct brazing is a well-known technique for joining ceramics either themselves or to metals, whereby the required costly active filler alloys are considered a handicap of this process. In this work the indirect brazing of zirconia to zirconia mechanically metallized with Ti was successfully achieved using conventional filler alloys. The mechanical metallization specially applied to oxide ceramics is a successfully technique that was patented by Forschungszentrum Juelich, Germany, and it has been the subject of applied researches in the last 10 years. This particular metallization is made at room temperature with low cost production and is environmentally safe. Partially stabilized zirconia with yttria was mechanically metallized with Ti and wetting conditions were evaluated using Ag-28Cu and Au-18Ni fillers. These conventional fillers dissolve part of the Ti-coating becoming on-site at brazing temperature an active filler alloy which reacts with the zirconium oxide to improve wetting on the ceramic surface. Better results were selected for brazing tests in a high-vacuum furnace (A brasagem direta é uma técnica bem conhecida para união de cerâmicas entre si bem como aos metais, segundo a qual as ligas de adição requeridas são consideradas uma relativa desvantagem devido ao aumento nos custos do processo. Neste trabalho, a brasagem indireta da zircônia à zircônia mecanicamente metalizada com Ti foi alcançada com sucesso, usando-se ligas de adição convencionais. A metalização mecânica especialmente aplicada aos óxidos cerâmicos é uma técnica bem sucedida que foi patenteada pelo Forschungszentrum Juelich, Alemanha, e tem sido tema de pesquisas nos últimos 10 anos. Esta metalização particular é feita à temperatura ambiente com baixo custo de produção, sendo ambientalmente segura. Zircônia parcialmente estabilizada com ítria (Y-PSZ foi mecanicamente metalizada com Ti e as condições de molhamento foram avaliadas usando

76 FR 9963 - Airworthiness Directives; Thielert Aircraft Engines GmbH Models TAE 125-02-99 and TAE 125-02-114...

Science.gov (United States)

2011-02-23

... Airworthiness Directives; Thielert Aircraft Engines GmbH Models TAE 125-02-99 and TAE 125-02-114 Reciprocating... TAE 125-02-99 and TAE 125-02-114 reciprocating engines installed in, but not limited to, Cessna 172... occurs later. Repetitive Replacements of Timing Chains for All TAE 125-02-99 and TAE 125-02-114 Engines...

Anlagen- und Kraftwerksrohrleitungsbau Greifswald GmbH plan and build wet decontamination plant for disposal of components of Russian nuclear submarines; Anlagen- und Kraftwerksrohrleitungsbau Greifswald GmbH plant und errichtet eine Nassdekontaminationsanlage zur Entsorgung von Komponenten russischer Atom U-Boote

Energy Technology Data Exchange (ETDEWEB)

Schneider, Jan; Konitzer, Arnold; Luedeke, Michael [AKB Anlagen- und Kraftwerksrohrleitungsbau Greifswald GmbH (Germany)

2010-05-15

Anlagen- und Kraftwerksrohrleitungsbau Greifswald, on behalf of Energiewerke Nord GmbH, Lubmin, plan and build a wet decontamination facility for the waste management center at Saida Bay, Russia (EZS). The plant is part of a large project with a total volume on the order of 3-digit millions funded by the German Federal Ministry for Economics and Technology. This project involves construction at Saida Bay near the port city of Murmansk of a complete waste management center and a long-term interim store for radioactively contaminated components. These components are mainly parts of decommissioned nuclear vessels and submarines whose metals, after decontamination, can be returned to economic use. The basis of the wet decontamination plant is a former AKB project for disposal and re-use of contaminated metal components of Energiewerke Nord GmbH at Lubmin, which is being adapted and developed further. The plant is to allow unrestricted re-use of the metals after surface cleaning and surface abrasion, respectively. For this purpose, the contaminated layer is removed far enough for the clearance limits under the Radiation Protection Ordinance to be met. A large fraction of the metals can be re-used after cleaning and do not have to be stored in a financially and logistically expensive process. The contract gives AKB an excellent opportunity to demonstrate its capabilities in plant construction, especially in the very sensitive area of disposal of radioactively contaminated objects. (orig.)

Compensation strategies for PET scanners with unconventional scanner geometry

CERN Document Server

Gundlich, B; Oehler, M

2006-01-01

The small animal PET scanner ClearPET®Neuro, developed at the Forschungszentrum Julich GmbH in cooperation with the Crystal Clear Collaboration (CERN), represents scanners with an unconventional geometry: due to axial and transaxial detector gaps ClearPet®Neuro delivers inhomogeneous sinograms with missing data. When filtered backprojection (FBP) or Fourier rebinning (FORE) are applied, strong geometrical artifacts appear in the images. In this contribution we present a method that takes the geometrical sensitivity into account and converts the measured sinograms into homogeneous and complete data. By this means artifactfree images are achieved using FBP or FORE. Besides an advantageous measurement setup that reduces inhomogeneities and data gaps in the sinograms, a modification of the measured sinograms is necessary. This modification includes two steps: a geometrical normalization and corrections for missing data. To normalize the measured sinograms, computed sinograms are used that describe the geometric...

76 FR 27861 - Airworthiness Directives; Diamond Aircraft Industries GmbH Models DA 42, DA 42 NG, and DA 42 M-NG...

Science.gov (United States)

2011-05-13

... Airworthiness Directives; Diamond Aircraft Industries GmbH Models DA 42, DA 42 NG, and DA 42 M-NG Airplanes... on Diamond aeroplanes, the majority of which were DA 40. In additional, at least 18 doors have been... conditions) while the aeroplane was parked. All DA 40 and DA 42 aeroplanes have a system installed that...

Modelling of the operational behaviour of passive autocatalytic recombiners

International Nuclear Information System (INIS)

Schwarz, Ulrich

2011-01-01

Due to severe accidents in nuclear power plants, a significant amount of hydrogen can be produced. In pressurized water reactors, a possible and wide-spread measurement is the use of auto-catalytic recombiners. There are numerous numerical models describing the operational behaviour of recombiners for containment codes. The numerical model REKO-DIREKT was developed at the Forschungszentrum Juelich. This model describes the chemical reaction on the catalytic sheets by a physical model, as opposed to the usual codes based on empirical correlations. Additionally, there have been experimental studies concerning the catalytic recombination of hydrogen since the 1990s. The aim of this work is the further development of the program REKO-DIREKT to an independent recombiner model for severe accident and containment codes. Therefore, the catalyst model already existed has been submitted by a parameter optimization with an experimental database expanded during this work. In addition, a chimney model has been implemented which allows the calculation of the free convection flow through the recombiner housing due to the exothermal reaction. This model has been tested by experimental data gained by a recently built test facility. The complete recombiner model REKO-DIREKT has been validated by data from literature. Another aim of this work is the derivation of the reaction kinetics for recombiner designs regarding future reactor concepts. Therefore, experimental studies both on single catalytic coated meshes as well as on two meshes installed in a row have been performed in laboratory scale. By means of the measured data, a theoretical approach for the determination of the reaction rate has been derived.

Benefits of an ultra large and multiresolution ensemble for estimating available wind power

Science.gov (United States)

Berndt, Jonas; Hoppe, Charlotte; Elbern, Hendrik

2016-04-01

In this study we investigate the benefits of an ultra large ensemble with up to 1000 members including multiple nesting with a target horizontal resolution of 1 km. The ensemble shall be used as a basis to detect events of extreme errors in wind power forecasting. Forecast value is the wind vector at wind turbine hub height (~ 100 m) in the short range (1 to 24 hour). Current wind power forecast systems rest already on NWP ensemble models. However, only calibrated ensembles from meteorological institutions serve as input so far, with limited spatial resolution (˜10 - 80 km) and member number (˜ 50). Perturbations related to the specific merits of wind power production are yet missing. Thus, single extreme error events which are not detected by such ensemble power forecasts occur infrequently. The numerical forecast model used in this study is the Weather Research and Forecasting Model (WRF). Model uncertainties are represented by stochastic parametrization of sub-grid processes via stochastically perturbed parametrization tendencies and in conjunction via the complementary stochastic kinetic-energy backscatter scheme already provided by WRF. We perform continuous ensemble updates by comparing each ensemble member with available observations using a sequential importance resampling filter to improve the model accuracy while maintaining ensemble spread. Additionally, we use different ensemble systems from global models (ECMWF and GFS) as input and boundary conditions to capture different synoptic conditions. Critical weather situations which are connected to extreme error events are located and corresponding perturbation techniques are applied. The demanding computational effort is overcome by utilising the supercomputer JUQUEEN at the Forschungszentrum Juelich.

76 FR 12627 - Airworthiness Directives; Diamond Aircraft Industries GmbH Models DA 42, DA 42 NG, and DA 42 M-NG...

Science.gov (United States)

2011-03-08

... Industries GmbH Models DA 42, DA 42 NG, and DA 42 M-NG Airplanes AGENCY: Federal Aviation Administration (FAA... on Diamond aeroplanes, the majority of which were DA 40. In additional, at least 18 doors have been... conditions) while the aeroplane was parked. All DA 40 and DA 42 aeroplanes have a system installed that...

Recent progress in the LACOMERA Project (Large-Scale Experiments on Core Degradation, Melt Retention and Coolability) at the Forschungszentrum Karslruhe

International Nuclear Information System (INIS)

Miassoedov, A.; Alsmeyer, H.; Eppinger, B.; Meyer, L.; Steinbrueck, M.

2004-01-01

The LACOMERA Project at the Forschungszentrum Karlsruhe (FZK) is a 3 year action within the 5 th Framework Programme of the EU. The overall objective of the project is to offer research institutions from the EU member countries and associated states access to four large-scale experimental facilities QUENCH, LIVE, DISCO-H, and COMET which can be used to investigate core melt scenarios from the beginning of core degradation to melt formation and relocation in the vessel, possible melt dispersion to the reactor cavity, and finally corium concrete interaction and corium coolability in the reactor cavity. As a result of two calls for proposals, seven organisations from four countries are expected to profit from the LACOMERA Project participating in preparation, conduct and analysis of the following experiments: QUENCH-L1: Air ingression impact on core degradation. The test has provided unique data for the investigation of air ingress phenomenology in conditions as representative as possible of the reactor case regarding the source term. QUENCH-L2: Boil-off of a flooded bundle. The test will be of a generic interest for all reactor types, providing a link between the severe accident and design basis areas, and would deliver oxidation and thermal hydraulic data at high temperatures. LIVE-L1: Simulation of melt relocation into the Reactor Pressure Vessel (RPV) lower head for VVER conditions. The experiment will provide important information on the melt pool behaviour during the stages of air circulation at the outer RPV surface with a subsequent flooding of the lower head. LIVE-L2: Transient corium spreading and its impact on the heat fluxes to the RPV wall and on the final shape of the melt in the RPV lower head. The test will address the questions of melt stabilisation and the effects of crust formation near the RPV wall for a nonsymmetrical melt pool shape. COMET-L1: Long-term 2D concrete ablation in siliceous concrete cavity at intermediate decay heat power level with

Neutron scattering at FRJ-2. Experimental reports 2004

International Nuclear Information System (INIS)

Brueckel, T.; Richter, D.; Zorn, R.

2004-01-01

The Research Centre FZ-Juelich is offering its neutron research facilities to a growing national and international user community for the benefit of their research using neutron beams. FZ-Juelich operates a 23 MW DIDO reactor that delivers a total neutron flux of 2.9 x 10 14 n/cm 2 s (undisturbed) for a comprehensive suite of 17 instruments installed at 5 individual thermal beam tubes and, in addition, 5 external cold neutron guides. In the year 2004 the reactor was in operation for 208 days and we are happy to announce that more than 150 individual experiments (constituting 61% of the total) were carried out by a large external user community from 85 institutions all over the world. In close collaboration with internal staff the study of soft matter systems took the largest stake. In addition, subjects of biology, magnetism and engineering were among the other main topics of the experimental programme. We gratefully acknowledge the funding programme ''Juelich Neutrons for Europe'' under the European initiative NMI3 that enables numerous external users from the EU and associated countries to come over, visit Juelich and perform their experiments. This book comprises the scientific reports of the experiments completed in 2004. We wish to thank all external users, local applicants, instrument responsibles, and technical staff for their joint efforts and contributions to the success and progress of the Juelich neutron research facility. (orig.)

IEK-3 report 2011. Climate-relevant energy research

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-07-01

IEK-3 is one of nine sub-institutes within the Institute of Energy and Climate Research at Forschungszentrum Juelich GmbH. IEK-3 aims to conduct research of social, ecological and economic relevance and thus generate groundbreaking results on an international level. This quality of work is achieved through basic research in close coordination with technical development work in relevant scientific and technical fields of expertise. Special significance is attached here to international cooperations with partners from research and industry. By implementing research results in innovative products, procedures and processes in cooperation with industry, IEK-3 hopes to help bridge the gap between science and technology. Cooperation with universities, universities of applied sciences, training departments and training centers is designed to promote opportunities for further education and training. With a staff of approximately 100, IEK-3 concentrates on the basic topics of electrochemistry and process engineering for fuel cells. In an integrated approach, the four key areas worked on in the institute - direct methanol fuel cells, high-temperature polymer electrolyte fuel cells, solid oxide fuel cells and fuel processing systems - are accompanied by systems analysis and theoretical investigations, basic modeling and simulations, and by experimental and theoretical systems evaluations. The information generated in these areas is used to design and verify functional systems. In addition, particular attention is given to the development, configuration and application of special measuring techniques for the structural analysis of membrane electrode assemblies, for flow simulation and visualization, and for the characterization of stacks. The solid oxide fuel cell (SOFC) stack pictured comprises 36 cells, each with an active cell area of 360 cm{sup 2}. The nominal power at a mean cell voltage of 800 mV is approximately 5.5 kW. The stack is operated on natural gas, which is

Annual report 1995 of the Central Safety Department, Research Center Karlsruhe

International Nuclear Information System (INIS)

Koelzer, W.

1996-04-01

The Central Safety Department is responsible for supervising, monitoring and, to some extent, also executing measures of radiation protection, industrial health and safety as well as physical protection and security at and for the institutes and departments of the Karlsruhe Research Center (Forschungszentrum Karlsruhe GmbH), and for monitoring liquid effluents and the environment of all facilities and nuclear installations on the premises of the Research Center. In addition, research and development work is carried out in the fields of behavior of tritium in the air/soil/plant system, tritium balances for nuclear fusion fuel cycles, and assessments of mining and ore dressing spoils. This report gives details of the different duties and reports the results of 1995 routine tasks, investigations and developments of the working groups of the Department. The reader is referred to the English translation of Chapter 1 describing the duties and organization of the Central Safety Department. (orig.) [de

Aerosol size characteristics in selected working areas

International Nuclear Information System (INIS)

Ahmed, K.

1984-05-01

This report presents the work done to study the aerosol activity size distributions and their respirable fractions in some selected areas of the Juelich Nuclear Research Center. Anderson cascade impactors were used to find the aerodynamic size ranges of the airborne particles for subsequent analysis of activity associated with each size group. The aerosols were found to follow in general log-normal distributions in the hot cells with values of AMAD between 5 and 10 μm. Measurements in the AVR containment and decontamination laboratory in Uranit GmbH showed deviations from log-normal distribution. In the waste press area the distribution is sometimes log-normal and sometimes not, depending upon the origin of waste. The values of AMAD are in the range of 2 to 4 μm in these areas. The respirable fractions were calculated using ACGIH definition for respirable dust to be < 25% in hot cells and < 60% in other areas. Pulmonary depositions according to ICRP model were < 10% and < 15% respectively. (orig./HP)

The design of actively cooled plasma-facing components

International Nuclear Information System (INIS)

Scheerer, M.; Smid, I.; Bolt, H.; Gervash, A.; Linke, J.

2001-01-01

In future fusion devices, like in the stellarator Wendelstein 7-X, the target plates of the divertor will be exposed to heat loads up to power densities of 10 MW/m 2 for 1000 s. For this purpose actively cooled target elements with an internal coolant flow return, made of 2-D CFC armor tiles brazed onto a two tube cooling structure were developed and manufactured at the Forschungszentrum Juelich. Individual bent- and coolant flow reversal elements were used to achieve a high flexibility in the shape of the target elements. A special brazing technology, using a thin layer of plasma-arc deposited titanium was used for the bonding of the cooling structure to the plasma facing armor (PFA). FEM-simulations of the thermal and mechanical behavior show that a detachment of about 25% of the bonded area between the copper tubes and the PFA can be tolerated, without exceeding the critical heat flux at 15 MW/m 2 or a surface temperature of 1400 C at 10 MW/m 2 by using twisted tape inserts with a twist ratio of 2 at a cooling water velocity of 10 m/s. Thermal cycling tests in an electron beam facility up to a power density level 10.5 MW/m 2 show a very good behavior of parts of the target elements, which confirms the performance under fusion relevant conditions. Even defected parts in the bonding interface of the target elements, known from ultrasonic inspections before, show no change in the thermal performance under cycling, which confirms also the structural integrity of partly defected regions. (orig.)

Course on medical aspects of nuclear and radiation accidents. Proceedings

International Nuclear Information System (INIS)

El-Naggar, A.M.; Nentwich, D.

1992-01-01

The Tchernobyl event deflected the attention from other potential hazards related to ionizing radiation as can result from misfunction or misuse of radioactive sources widely applied in human medicine or in industry. It was only after the Goiania accident in Brazil that these radiation sources retrieved the attention they deserve. Around the world, great efforts have been undertaken by the producers and users of these sources, supported by scientific investigations and by legislative backing, to minimize to the greatest extent possible any risk to public health. Nevertheless, accidents involving serious overexposures of individuals cannot be excluded entirely for the future. It is therefore a matter of professional responsibility to carefully evaluate the experiences gathered in the wake of radiation accidents and proliferate this knowledge to those professionals-health physicists, decontamination specialists, medical and paramedical staff - that might be confronted with the consequences of an accident and from whose expertise and proper handling human lifes might depend. It was with this aim that the Atomic Energy Authority and the International Bureau of the Forschungszentrum Juelich undertook to organize a joint training course within the German-Egyptian governmental agreement on bilateral cooperation in scientific research and technological development signed on 11.4.1979. Selected experts from both sides convened and presented both compended text book knowledge as well as own recent scientific data reflecting the state of the art. This material was selected and prepared in order to fit the needs of the invited 25 Egyptian physicians and paramedical course participants who where to be given guidelines on how to react to radiation overexposure incidents. (orig.)

Introduction of a quality management system at the Gemeinschaftskernkraftwerk Neckar GMBH (GKN)

International Nuclear Information System (INIS)

Haug, W.; Graeber, U.

1997-01-01

In the course of commissioning unit II of the GKN nuclear power plant, a Quality Assurance Manual was introduced in 1988. The Quality Assurance Manual is essentially based on the quality assurance elements of KTA 1401; that is, the emphasis is on quality assurance procedures for safety relevant plant components. During the actual application of the Quality Assurance Manual, however, it soon became apparent that this one-dimensional approach to quality management is not sufficient for the efficient organization of the quality related operational processes and procedures. The management of GKN decided at the end of 1992 to carry out a revision of the Quality Assurance Manual, with the objective of using quality, within the meaning of DIN ISO 9001, as a comprehensive organizational element for all operational processes and procedures. BTB-Jansky GmbH, a consulting firm familiar with the operational processes and procedures was commissioned to revise the Quality Assurance Manual, to investigate the procedures and implement a quality management system. The introduction of the quality management system has made it possible for the quality relevant processes and procedures at GKN to be regulated comprehensively and in a systematically transparent and workable manner. The introduction of the quality management system took place within the framework of an efficiency raising programme. It becomes apparent from this that the introduction of a quality management system is able to provide economic benefits for the operator. (orig.)

Anlagen- und Kraftwerksrohrleitungsbau Greifswald GmbH plan and build wet decontamination plant for disposal of components of Russian nuclear submarines

International Nuclear Information System (INIS)

Schneider, Jan; Konitzer, Arnold; Luedeke, Michael

2010-01-01

Anlagen- und Kraftwerksrohrleitungsbau Greifswald, on behalf of Energiewerke Nord GmbH, Lubmin, plan and build a wet decontamination facility for the waste management center at Saida Bay, Russia (EZS). The plant is part of a large project with a total volume on the order of 3-digit millions funded by the German Federal Ministry for Economics and Technology. This project involves construction at Saida Bay near the port city of Murmansk of a complete waste management center and a long-term interim store for radioactively contaminated components. These components are mainly parts of decommissioned nuclear vessels and submarines whose metals, after decontamination, can be returned to economic use. The basis of the wet decontamination plant is a former AKB project for disposal and re-use of contaminated metal components of Energiewerke Nord GmbH at Lubmin, which is being adapted and developed further. The plant is to allow unrestricted re-use of the metals after surface cleaning and surface abrasion, respectively. For this purpose, the contaminated layer is removed far enough for the clearance limits under the Radiation Protection Ordinance to be met. A large fraction of the metals can be re-used after cleaning and do not have to be stored in a financially and logistically expensive process. The contract gives AKB an excellent opportunity to demonstrate its capabilities in plant construction, especially in the very sensitive area of disposal of radioactively contaminated objects. (orig.)

Performance Refactoring of Instrumentation, Measurement, and Analysis Technologies for Petascale Computing: the PRIMA Project

Energy Technology Data Exchange (ETDEWEB)

Malony, Allen D. [Department of Computer and Information Science, University of Oregon; Wolf, Felix G. [Juelich Supercomputing Centre, Forschungszentrum Juelich

2014-01-31

The growing number of cores provided by today’s high-end computing systems present substantial challenges to application developers in their pursuit of parallel efficiency. To find the most effective optimization strategy, application developers need insight into the runtime behavior of their code. The University of Oregon (UO) and the Juelich Supercomputing Centre of Forschungszentrum Juelich (FZJ) develop the performance analysis tools TAU and Scalasca, respectively, which allow high-performance computing (HPC) users to collect and analyze relevant performance data – even at very large scales. TAU and Scalasca are considered among the most advanced parallel performance systems available, and are used extensively across HPC centers in the U.S., Germany, and around the world. The TAU and Scalasca groups share a heritage of parallel performance tool research and partnership throughout the past fifteen years. Indeed, the close interactions of the two groups resulted in a cross-fertilization of tool ideas and technologies that pushed TAU and Scalasca to what they are today. It also produced two performance systems with an increasing degree of functional overlap. While each tool has its specific analysis focus, the tools were implementing measurement infrastructures that were substantially similar. Because each tool provides complementary performance analysis, sharing of measurement results is valuable to provide the user with more facets to understand performance behavior. However, each measurement system was producing performance data in different formats, requiring data interoperability tools to be created. A common measurement and instrumentation system was needed to more closely integrate TAU and Scalasca and to avoid the duplication of development and maintenance effort. The PRIMA (Performance Refactoring of Instrumentation, Measurement, and Analysis) project was proposed over three years ago as a joint international effort between UO and FZJ to accomplish

Transport of the reactive substances eosin, uranium and lithium in a heterogeneous aquifer; Transport der reaktiven Stoffe Eosin, Uranin und Lithium in einem heterogenen Grundwasserleiter

Energy Technology Data Exchange (ETDEWEB)

Doering, U.

1997-02-01

To predict the movement of a contaminant plume in an aquifer is still a task of great uncertainty. This uncertainty is generally attributed to an insufficient understanding of the chemical reaction processes and/or to the natural aquifer heterogeneities. In an integrated approach of field experiments, laboratory experiments and numerical simulations, the transport of the weakly reactive solutes eosin, uranin and lithium was investigated at a test site near the Research Center in Juelich. The field scale transport behavior of the solutes was studied by large scale tracer tests. To characterize aquifer heterogeneities, in-situ and laboratory measurements were performed. In-situ measurements covered about 1500 flowmeter measurements and 90 determinations of the groundwater flow velocity by the borehole method. The spatial variability of hydraulic and physico-chemical parameters was further determined on 400 sediment samples. These parameters included: Grain size distribution, calculated hydraulic conductivity, unconformity and as physico-chemical parameters the organic carbon content, specific surface and the cation exchange capacity. Furthermore sorption coefficients were measured on 75 sediment samples for uranium and lithium. The statistical evaluation of these data showed that the hydraulic heterogeneity was larger but in the same order of magnitude as the physico-chemical parameters. (orig./SR) [Deutsch] Eine Schadstoff-Ausbreitung im Grundwasser vorherzusagen, ist noch immer eine Aufgabe mit unsicherem Ergebnis. Diese Prognose-Unsicherheiten werden im Allgemeinen auf ein unzureichendes Verstaendnis der chemischen Reaktionsprozesse und/oder auf die natuerliche Heterogenitaet des Grundwasserleiters zurueckgefuehrt. In dem hier beschriebenen Forschungsprojekt, das Feldversuche, Laborversuche und numerische Simulationen integriert, wurde der Transport der schwach reaktiven Substanzen Eosin, Uranin und Lithium auf einem Versuchsgelaende nahe des Forschungszentrums

Materials specific work at Forschungszentrum Karlsruhe and in cooperation with the industrial partners ALKEM and Interatom for the development of nuclear oxide fuels for fission reactors

International Nuclear Information System (INIS)

Kleykamp, H.; Muehling, G.

2005-09-01

The fabrication of uranium-plutonium oxide fuel started in Forschungszentrum Karlsruhe and at ALKEM company to begin for the criticality experiments in the SNEAK reactor and subsequently for stationary fuel pin irradiations in the FR2, BR2, DFR, Rapsodie, Phenix and KNK II reactors. The production methods comprised first the mechanical blending of UO2 and PuO2 followed by direct pressing and sintering of the pellets, later the advanced methods such as optimized comilling and ammonium uranyl plutonyl coprecititation. The fabrication of pellets was described in the main, further the alternative fuel pin manufacturing processes by vibrational compaction and hot-impact densification were discussed. The first capsule and pin irradiations in the FR2 and BR2 reactors contributed to the assessment of the maximum operation parameters within the fuel pin development such as linear heat rating, cladding temperature and burnup. Subsequently, small-bundle and largebundle irradiations were made in fast reactors in cooperation with Interatom company in order to verify the specifications for the commercial fast reactor SNR 300. Milestones were the maximum burnup of 175 GWd/t metal, corresponding 18.6 % of the heavy atoms, obtained in one of the KNK II fuel pin assemblies, and the displacement rates in the cladding materials of 140 dpa NRT attained in the Phenix reactor. Higher implications gained later the stationary irradiations of defected mixed-oxide pins, the mild fuel pin transient operations, the local blockage experiments and the severe hypothetic accidents in the respective Siloe, HFR, BR2 and CABRI reactors. These experiments were made solely in international partnership. Further activities were the chemical analyses of solid residues and coprecipitations of irradiated mixed-oxide fuels in the head-end of the reprocessing. All these actions were coordinated in the then fast breeder project. Furthermore, irradiated fuels and fuel pins of other reactor types were

Data on research and technology marketing in 2000; Daten zum Forschungs- und Technologiemarketing 2000

Energy Technology Data Exchange (ETDEWEB)

Friehmelt, R.; Oberdorf, R.

2001-04-01

At Forschungszentrum Karlsruhe all ideas suited for cooperations or licenses or for the raising of third-party funds are stored in a know-how database run by the Technology Transfer and Marketing Department (TTM). At trade fairs, current licenses and cooperations desired and offered are pinned up on a board. In addition, approx. 6300 interested persons are informed about wishes and offers of licenses and cooperations five times per year. In the present report, the ideas of Forschungszentrum Karlsruhe are split up in accordance with the type of partner wanted, the technical field covered, their age, and the institutes involved. The numbers of contacts made on trade fairs are indicated. Inquiries regarding the TT information sheets have been counted and the contacts are evaluated. Furthermore, it is reported about the presence of technology offers in databases. Strategic actions, in particular market studies, were carried out for attractive topics in cooperation with partner companies. Finally, proposals for improvement shall be discussed. (orig.) [German] Von der Stabsabteilung Technologietransfer und Marketing (TTM) werden alle Ideen aus dem Forschungszentrum Karlsruhe, die fuer Kooperationen, Lizenzen oder zur Drittmitteleinwerbung geeignet sind, in einer Know-how-Datenbank gefuehrt. Die aktuellen Technologieangebote werden auf Messen ausgehaengt. Ausserdem werden fuenfmal jaehrlich Technologieangebote an einen Kreis von etwa 6300 Interessenten verschickt. Der Bericht schluesselt die Ideen des Forschungszentrums nach Art der gesuchten Partner, Fachgebieten, Alter und nach Instituten auf. Es werden die Zahlen der Messekontake angegeben. Zu den Technologieangeboten wurden die Ruecklaeufer gezaehlt und die Kontakte bewertet. Es folgen Angaben zur Praesenz der Technologieangebote des Forschungszentrums in Datenbanken. Zu attraktiven Themenbereichen wurden mit Unterstuetzung von Partnerfirmen strategische Aktionen durchgefuehrt, insbesondere Marktuntersuchungen. In

The reduction of radioactive discharges from mine workings: rehabilitation results conducted by WISMUTH GmbH

International Nuclear Information System (INIS)

Knoch-Weber, J.

2002-01-01

With operations designed to rehabilitate uranium mining operations terminated in late 1990 running for ten years now, significant progress is evident at all sites of Wismut GmbH. Of the total of DM 13 billion earmarked by the federal authorities in 1991 for the implementation of this exceptionally large environmental restoration project, about DM 6.7 billion were spent by the end of 2000, and of this DM 3.7 billion for the remediation of sites located in Eastern Thuringia and DM 3 billion for sites located in Saxony. Safe shutdown of underground mine workings remains an essential remediation task at all former mining sites. Following international standard practices, the preferred option retained called for flooding of the underground workings, i.e. cessation of water pumping and filling of mine workings by the naturally rising ground water level. Filling and sealing of mines is aimed at achieving geomechanical stabilisation of the ground surface and at reducing and/or avoiding gaseous and aerosolised radioactive discharges into the environment as a source of mine-related public exposure. (orig.)

10 years of current generation in the AVR reactor. The high-temperature pebble-bed reactor - a hot tip for our future

Energy Technology Data Exchange (ETDEWEB)

Schenk, P [Arbeitsgemeinschaft Versuchs-Reaktor G.m.b.H., Juelich (Germany, F.R.); A G, Stadtwerke Duesseldorf [Germany, F.R.; Vereinigung Deutscher Elektrizitaetswerke e.V. (VDEW), Frankfurt am Main (Germany, F.R.)); Nehrling, H [Ministerium fuer Wirtschaft, Mittelstand und Verkehr des Landes Nordrhein-Westfalen, Duesseldorf (Germany, F.R.); Daeunert, U [Bundesministerium fuer Forschung und Technologie, Bonn-Bad Godesberg (Germany, F.R.); Schulten, R [Kernforschungsanlage Juelich G.m.b.H. (Germany, F.R.). Inst. fuer Reaktorentwicklung; Mattick, W [Brown, Boveri und Cie A.G., Mannheim (Germany, F.R.)

1978-02-01

On 17th December 1967, the experimental nuclear power plant (AVR) in Juelich supplied RWE network with power for the first time. With the start of the power operation of the first German high-temperature reactor (HTR), a milestone was reached in the development of this new and progressive line of construction. On the same day exactly 10 years later, the successful work with the hottest nuclear reactor in the world was reviewed in the presence of 15 associates of the Arbeitsgemeinschaft Versuchsreaktor (AVR) Ltd. and the personnel of the experimental nuclear power plant at a festival event in the main auditorium of the nuclear power plant at Juelich before some 300 guests from central and local government, the board of control, representatives of the population of the Dueren area and the town of Juelich, as well as bodies of the power producing industry.

10 years of current generation in the AVR reactor

International Nuclear Information System (INIS)

Schenk, P.; Nehrling, H.; Daeunert, U.; Schulten, R.

1978-01-01

On 17th December 1967, the experimental nuclear power plant (AVR) in Juelich supplied RWE network with power for the first time. With the start of the power operation of the first German high-temperature reactor (HTR), a milestone was reached in the development of this new and progressive line of construction. On the same day exactly 10 years later, the successful work with the hottest nuclear reactor in the world was reviewed in the presence of 15 associates of the Arbeitsgemeinschaft Versuchsreaktor (AVR) Ltd. and the personnel of the experimental nuclear power plant at a festival event in the main auditorium of the nuclear power plant at Juelich before some 300 guests from central and local government, the board of control, representatives of the population of the Dueren area and the town of Juelich, as well as bodies of the power producing industry. (orig.) [de

Non-destructive testing of high pressure fibre reinforced composites tubes by computed tomography

Energy Technology Data Exchange (ETDEWEB)

Klimek, L. [Qualitaetszentrum Dortmund (Germany); Monstadt, H.; Boedecker, T. [EFMT, Bochum (Germany)

1995-12-31

For new applications of fibre reinforced composites, new non-destructive testing methods are required which on the one hand can be used as a quality testing method and on the other hand as an in-service inspection method during the life of a product. Special attention should be paid to the defect sensitivity and to a detailed classification of visible defects. Defining a detectable standard, comparable investigations were carried out using the Ultra Fast Scanner which is located at the Entwicklungs- und Forschungszentrum fuer Mikrotherapie gGmbH (EFMT) and the industrial scanner of the Qualitaetszentrum Dortmund GmbH u. Co. KG (QZ-DO). The investigation object is a high pressure tube which is made up of three different diameter structures. There can be distinguished between three types of tube layers. Digital image processing has been used to get more information form measured data. We developed two different types of digital image filters: A SIGMA and a Contrast Sensitive Weights (CSW) image filter and made a comparative study. (orig./RHM)

Evaluation of an interlaboratory comparison of the chemical assay of U, Th, oxide coated particles

International Nuclear Information System (INIS)

Tamberg, T.; Thiele, D.; Brodda, B.G.

1981-09-01

The prototype reactor THTR in Schmehausen (Germany, F.R.) burns a (Th,U)O 2 nuclear fuel using 93% enriched uranium. This material is particularly Safeguards sensitive. It was therefore desirable for the Safeguards Analytical Laboratory (SAL) and other laboratories of the Agency Network to collect experience and test their performance in the analysis of such materials. Support was requested from the ''Joint Programme between the IAEA and the Federal Republic of Germany for the Development of Safeguards Techniques'' to perform, as a first step, an interlaboratory comparison of the chemical assay of U and Th in pyrocarbon-coated BISO-type fuel particles. Such an intercomparison was organized under the auspices of the Institut fuer Chemische Technologie (ICT) of the Kernforschungsanlage Juelich GmbH (KFA). SAL prepared a statistical evaluation of the results which was discussed in Vienna in June 1980. The objective of the project was to define the state of the art in the chemical assay of U-Th fuels and the analytical requirements for the sampling of materials of major interest to Agency Safeguards at present

Study on the profitableness of electricity generation with high temperature reactors

International Nuclear Information System (INIS)

Kolb, G.

1978-08-01

The programme group 'Systemforschung und Technologische Entwicklung' (STE) of the Nuclear Research Centre Juelich in cooperation with the internal institutions 'Projekttraegerschaft Entwicklung von Hochtemperaturreaktoren' (PTH) and 'Institut fuer Reaktorentwicklung' (IRE) on the one hand, and the external partner 'Hochtemperatur-Reactorbau GmbH' (HRB) and 'Gesellschaft fuer Hochtemperaturreactor Technik' (GHT) on the other hand have set up a study on fuel cycle costs, electricity production cost and the economical use as well as uranium resource protection by introduction of high temperature reactors (HTR) with pebble bed core to generate electricity. The pressurized-water reactor (PWR) today on the market serves as comparison. The working results obtained sofar are compiled in the present report. It was particularly noted that - the HTR can economically fully compete with the PWR for electricity generation - the necessary supply of natural uranium for the HTR in open circuit is about one third lower and in the closed circuit, almost two thirds lower than in the corresponding PWR. A further reduction is possible on a long-term basis by highly converting HTW systems. (orig.) [de

The stability of uranium microspheres for future application as reference standard in analytical measurements

Energy Technology Data Exchange (ETDEWEB)

Middendorp, R.; Duerr, M.; Bosbach, D. [Forschungszentrum Juelich GmbH, IEK-6, 52428 Juelich (Germany)

2016-07-01

The monitoring of fuel-cycle facilities provides a tool to confirm the compliant operation, for example with respect to emissions into the environment or to supervise non-proliferation commitments. Hereby, anomalous situations can be detected in a timely manner and responsive action can be initiated to prevent an escalation into an event of severe consequence to society. In order to verify non-nuclear weapon states' compliance with the non-proliferation treaty (NPT), international authorities such as the International Atomic Energy Agency (IAEA) conduct inspections at facilities dealing with fissile or fertile nuclear materials. One measure consists of collection of swipe samples through inspectors for later analysis of collected nuclear material traces in the laboratory. Highly sensitive mass spectrometric methods provide a means to detect traces from nuclear material handling activities that provide indication of undeclared use of the facility. There are, however, no relevant (certified) reference materials available that can be used as calibration or quality control standards. Therefore, an aerosol-generation based process was established at Forschungszentrum Juelich for the production of spherical, mono-disperse uranium oxide micro-particles with accurately characterized isotopic compositions and amounts of uranium in the pico-gram range. The synthesized particles are studied with respect to their suitability as (certified) reference material in ultra-trace analysis. Several options for preparation and stabilization of the particles are available, where preparation of particles in suspension offers the possibility to produces specific particle mixtures. In order to assess the stability of particles, dissolution behavior and isotope exchange effects of particles in liquid suspension is studied on the bulk of suspended particles and also via micro-analytical methods applied for single particle characterization. The insights gained within these studies will

Prompt gamma neutron activation analysis of toxic elements in radioactive waste packages

Energy Technology Data Exchange (ETDEWEB)

Ma, J.-L. [CEA, DEN, Cadarache, Nuclear Measurement Laboratory, F-13108 St Paul-lez-Durance (France); Carasco, C., E-mail: cedric.carasco@cea.fr [CEA, DEN, Cadarache, Nuclear Measurement Laboratory, F-13108 St Paul-lez-Durance (France); Perot, B. [CEA, DEN, Cadarache, Nuclear Measurement Laboratory, F-13108 St Paul-lez-Durance (France); Mauerhofer, E.; Kettler, J.; Havenith, A. [Institute of Energy and Climate Research - Nuclear Waste Management and Reactor Safety, Forschungszentrum Juelich GmbH (Germany)

2012-07-15

The French Alternative Energies and Atomic Energy Commission (CEA) and National Radioactive Waste Management Agency (ANDRA) are conducting an R and D program to improve the characterization of long-lived and medium activity (LL-MA) radioactive waste packages. In particular, the amount of toxic elements present in radioactive waste packages must be assessed before they can be accepted in repository facilities in order to avoid pollution of underground water reserves. To this aim, the Nuclear Measurement Laboratory of CEA-Cadarache has started to study the performances of Prompt Gamma Neutron Activation Analysis (PGNAA) for elements showing large capture cross sections such as mercury, cadmium, boron, and chromium. This paper reports a comparison between Monte Carlo calculations performed with the MCNPX computer code using the ENDF/B-VII.0 library and experimental gamma rays measured in the REGAIN PGNAA cell with small samples of nickel, lead, cadmium, arsenic, antimony, chromium, magnesium, zinc, boron, and lithium to verify the validity of a numerical model and gamma-ray production data. The measurement of a {approx}20 kg test sample of concrete containing toxic elements has also been performed, in collaboration with Forschungszentrum Juelich, to validate the model in view of future performance studies for dense and large LL-MA waste packages. - Highlights: Black-Right-Pointing-Pointer Comparison between measurements and MCNP calculation has been performed for a PGNAA system. Black-Right-Pointing-Pointer The system aims at controlling the amount of toxic elements in nuclear waste. Black-Right-Pointing-Pointer Simple samples and a concrete cylinder in which impurities have been added are used. Black-Right-Pointing-Pointer Calculations agree within a factor 2 with measurements. Black-Right-Pointing-Pointer The system can be improved with a better neutron flux monitoring and the use of boron-free graphite.

Concepts for the interim storage of spent fuel elements from research reactors in the Federal Republic of Germany

International Nuclear Information System (INIS)

Niephaus, D.; Bensch, D.; Quaassdorff, P.; Plaetzer, S.

1997-01-01

Research reactors have been operated in the Federal Republic of Germany since the late fifties. These are Material Test Reactors (MTR) and training, Research and Isotope Facilities of General Atomic (TRIGA). A total of seven research reactors, i.e. three TRIGA and four MTR facilities were still in operation at the beginning of 1996. Provisions to apply to the back-end of the fuel cycle are required for their continued operation and for already decommissioned plants. This was ensured until the end of the eighties by the reprocessing of spent fuel elements abroad. In view of impeding uncertainties in connection with waste management through reprocessing abroad, the development of a national back-end fuel cycle concept was commissioned by the Federal Minister of Education, Science, Research and Technology in early 1990. Development work was oriented along the lines of the disposal concept for irradiated light-water reactor fuel elements from nuclear power plants. Analogously, the fuel elements from research reactors are to be interim-stored on a long-term basis in adequately designed transport and storage casks and then be directly finally disposed without reprocessing after up to forty years of interim storage. As a first step in the development of a concept for interim storage, several sites with nuclear infrastructure were examined and assessed with respect to their suitability for interim storage. A reasonably feasible reference concept for storing the research reactor fuel elements in CASTOR MTR 2 transport and storage casks at the Ahaus interim storage facility (BZA) was evaluated and the hot cell facility and AVR store of Forschungszentrum Juelich (KFA) were proposed as an optional contingency concept for casks that cannot be repaired at Ahaus. Development work was continued with detailed studies on these two conceptual variants and the results are presented in this paper. (author)

Performance Study of an aSi Flat Panel Detector for Fast Neutron Imaging of Nuclear Waste

Energy Technology Data Exchange (ETDEWEB)

Schumann, M.; Mauerhofer, E. [Institute of Energy and Climate Research - Nuclear Waste Management and Reactor Safety, Forschungszentrum Juelich GmbH, 52425 Juelich (Germany); Engels, R.; Kemmerling, G. [Central Institute for Engineering, Electronics and Analytics - Electronic Systems, Forschungszentrum Juelich GmbH, 52425 Juelich (Germany); Frank, M. [MATHCCES - Department of Mathematics, RWTH Aachen University, 52062 Aachen (Germany); Havenith, A.; Kettler, J.; Klapdor-Kleingrothaus, T. [Institute of Nuclear Engineering and Technology Transfer, RWTH Aachen University, 52062 Aachen (Germany); Schitthelm, O. [Corporate Technology, Siemens AG, 91058 Erlangen (Germany)

2015-07-01

Radioactive waste must be characterized to check its conformance for intermediate storage and final disposal according to national regulations. For the determination of radio-toxic and chemo-toxic contents of radioactive waste packages non-destructive analytical techniques are preferentially used. Fast neutron imaging is a promising technique to assay large and dense items providing, in complementarity to photon imaging, additional information on the presence of structures in radioactive waste packages. Therefore the feasibility of a compact Neutron Imaging System for Radioactive waste Analysis (NISRA) using 14 MeV neutrons is studied in a cooperation framework of Forschungszentrum Juelich GmbH, RWTH Aachen University and Siemens AG. However due to the low neutron emission of neutron generators in comparison to research reactors the challenging task resides in the development of an imaging detector with a high efficiency, a low sensitivity to gamma radiation and a resolution sufficient for the purpose. The setup is composed of a commercial D-T neutron generator (Genie16GT, Sodern) with a surrounding shielding made of polyethylene, which acts as a collimator and an amorphous silicon flat panel detector (aSi, 40 x 40 cm{sup 2}, XRD-1642, Perkin Elmer). Neutron detection is achieved using a general propose plastic scintillator (EJ-260, Eljen Technology) linked to the detector. The thermal noise of the photodiodes is reduced by employing an entrance window made of aluminium. Optimal gain and integration time for data acquisition are set by measuring the response of the detector to the radiation of a 500 MBq {sup 241}Am-source. Detector performance was studied by recording neutron radiography images of materials with various, but well known, chemical compositions, densities and dimensions (Al, C, Fe, Pb, W, concrete, polyethylene, 5 x 8 x 10 cm{sup 3}). To simulate gamma-ray emitting waste radiographs in presence of a gamma-ray sources ({sup 60}Co, {sup 137}Cs, {sup 241

Performance Refactoring of Instrumentation, Measurement, and Analysis Technologies for Petascale Computing. The PRIMA Project

Energy Technology Data Exchange (ETDEWEB)

Malony, Allen D. [Univ. of Oregon, Eugene, OR (United States). Dept. of Computer and Information Science; Wolf, Felix G. [Wilhelm-Johnen-Strasse, Julich (Germany). Forschungszentrum Julich GmbH

2014-01-31

The growing number of cores provided by today’s high-­end computing systems present substantial challenges to application developers in their pursuit of parallel efficiency. To find the most effective optimization strategy, application developers need insight into the runtime behavior of their code. The University of Oregon (UO) and the Juelich Supercomputing Centre of Forschungszentrum Juelich (FZJ) develop the performance analysis tools TAU and Scalasca, respectively, which allow high-­performance computing (HPC) users to collect and analyze relevant performance data – even at very large scales. TAU and Scalasca are considered among the most advanced parallel performance systems available, and are used extensively across HPC centers in the U.S., Germany, and around the world. The TAU and Scalasca groups share a heritage of parallel performance tool research and partnership throughout the past fifteen years. Indeed, the close interactions of the two groups resulted in a cross-­fertilization of tool ideas and technologies that pushed TAU and Scalasca to what they are today. It also produced two performance systems with an increasing degree of functional overlap. While each tool has its specific analysis focus, the tools were implementing measurement infrastructures that were substantially similar. Because each tool provides complementary performance analysis, sharing of measurement results is valuable to provide the user with more facets to understand performance behavior. However, each measurement system was producing performance data in different formats, requiring data interoperability tools to be created. A common measurement and instrumentation system was needed to more closely integrate TAU and Scalasca and to avoid the duplication of development and maintenance effort. The PRIMA (Performance Refactoring of Instrumentation, Measurement, and Analysis) project was proposed over three years ago as a joint international effort between UO and FZJ to

The use of titanium alloys for dynamic risers: a literature review

Energy Technology Data Exchange (ETDEWEB)

Torster, F.; Kocak, M.; Santos, J.F. dos [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Werkstofforschung; Hutt, G. [Stolt Comex Seaway Ltd., Aberdeen, (Scotland)

1997-12-31

The main topic of this short literature review is to describe the material related aspects concerning the production and purpose of flexible titanium risers for offshore oil and gas production. Metallurgy and alloying of titanium are briefly introduced. The review concentrates on the materials properties that are relevant for the intended use in marine environment. The focus is put on {alpha}+{beta} Ti-alloys, because earlier investigations have shown that this alloy family is the most suitable one for this purpose. Further topics which are taken into account are welding processes for titanium, weld properties and aspects of the associated weld defects as well. This literature review has been carried out at GKSS-Forschungszentrum Geesthacht GmbH within the framework of the project `Titanium Risers for Deepwater Developments (contract nr. OG/175/95), supported by the THERMIE-JOULE Programme of the European Commission. The project consortium is formed by Stolt Comex Seaway Ltd. (UK), Seaflex AS (Norway) and GKSS (Germany). (orig.) [Deutsch] Die vorliegende kurze Literaturrecherche befasst sich vorrangig mit den materialbezogenen Aspekten der Produktion und des Einsatzes von flexiblen `Risern` aus Titanlegierungen fuer die Oel- und Gasfoerderung auf See. Die Metallurgie und das Legieren von Titan werden kurz vorgestellt. Die Recherche konzentriert sich im weiteren auf die Materialeigenschaften, die fuer den vorgesehenen Einsatz in mariner Umgebung von besonderer Bedeutung sind. In erster Linie wird dabei auf {alpha}+{beta}-Titanlegierungen eingegangen, da vorausgegangene Untersuchungen gezeigt haben, dass diese Legierungsfamilie die guenstigsten Eigenschaften fuer das vorgesehene Einsatzgebiet aufweist. Im weiteren werden die Schweissprozesse, die bei Titanlegierungen eingesetzt werden, vorgestellt und die Eigenschaften und moeglichen Schweissfehler der hergestellten Schweissverbindungen gegenuebergestellt. Diese Literaturrecherche wurde im GKSS-Forschungszentrum im

Progress and problems in modelling HTR core dynamics

International Nuclear Information System (INIS)

Scherer, W.; Gerwin, H.

1991-01-01

In recent years greater effort has been made to establish theoretical models for HTR core dynamics. At KFA Juelich the TINTE (TIme dependent Neutronics and TEmperatures) code system has been developed, which is able to model the primary circuit of an HTR plant using modern numerical techniques and taking into account the mutual interference of the relevant physical variables. The HTR core is treated in 2-D R-Z geometry for both nucleonics and thermo-fluid-dynamics. 2-energy-group diffusion theory is used in the nuclear part including 6 groups of delayed neutron precursors and 14 groups of decay heat producers. Local and non-local heat sources are incorporated, thus simulating gamma ray transport. The thermo-fluid-dynamics module accounts for heterogeneity effects due to the pebble bed structure. Pipes and other components of the primary loop are modelled in 1-D geometry. Forced convection may be treated as well as natural convection in case of blower breakdown accidents. Validation of TINTE has started using the results of a comprehensive experimental program that has been performed at the Arbeitsgemeinschaft Versuchsreaktor GmbH (AVR) high temperature pebble bed reactor at Juelich. In the frame of this program power transients were initiated by varying the helium blower rotational speed or by moving the control rods. In most cases a good accordance between experiment and calculation was found. Problems in modelling the special AVR reactor geometry in two dimensions are described and suggestions for overcoming the uncertainties of experimentally determined control rod reactivities are given. The influence of different polynomial expansions of xenon cross sections to long term transients is discussed together with effects of burnup during that time. Up to now the TINTE code has proven its general applicability to operational core transients of HTR. The effects of water ingress on reactivity, fuel element corrosion and cooling gas properties are now being

The influence of KD and K anti K mesonic molecules in selected reactions; Auswirkung der im KD- und K anti K-Kanal gebildeten mesonischen Molekuele in verschiedenen Reaktionen

Energy Technology Data Exchange (ETDEWEB)

Sassen, F.P.

2004-07-01

The attractive potential of the Juelich meson exchange model in the K anti K-channel causes formation of a scalar isoscalar molecule. We investigate this observation from different points of view. First we look at the dependence of pion production in the peripheral reaction {pi}{sup -}p {yields} {pi}{sup 0}{pi}{sup 0}n on the momentum transferred at the nucleus. Accounting for the production via {pi} and a{sub 1} emission in a consistent way, we are able to explain the momentum dependence using the Juelich model. Furthermore we investigate how a measurement of dd {yields} {alpha}K anti K close to threshold may contribute to our knowledge on K anti K interaction and the f{sub 0}(980). The Juelich model links the properties of the f{sub 0}(980) to the a{sub 0}(980). We will use this information to learn about the d anti K-interaction in pp {yields} dK anti K. The recent discovery of the D{sup *}{sub sJ}(2317) o ers a different perspective on the dynamical generation of poles, since it may be connected to the KD-threshold nearby. We construct a SU(4)-extention of the Juelich model including isospin violation. Within this extention a dynamical resonance is formed, which only may explain the D{sup *}{sub sJ}(2317) if isoscalar production is assumed. Special interest is paid to the predicted width of the D{sup *}{sub sJ}(2317) associated with a dynamical interpretation. (orig.)

GSF - Forschungszentrum fuer Umwelt und Gesundheit. Annual report 2003; GSF - Forschungszentrum fuer Umwelt und Gesundheit. Jahresbericht 2003

Energy Technology Data Exchange (ETDEWEB)

Wiedemann, M; Haury, H J; Goedde, M; Guldner, H; Kettembeil, S; Leser, B; Meyer-Streng, O [eds.

2004-07-01

The GSF develops scientific principles that provide the basis for protecting human health and the natural basis of life for the future. GSF health research focuses on the genetic and immunological basis of molecular protection and define and their dysfunction during disease development, and the identification of new factors that contribute to sickness or health. (orig.)

GSF - Forschungszentrum fuer Umwelt und Gesundheit. Annual report 2005; GSF - Forschungszentrum fuer Umwelt und Gesundheit. Jahresbericht 2005

Energy Technology Data Exchange (ETDEWEB)

Wiedemann, M.; Haury, H.J.; Guldner, H.; Kettembeil, S.; Leser, B.; Offenberger, M.; Weiner, M. (eds.)

2006-07-01

The report for the year 2005 falls at a time of change in both the Scientific and Administrative Managing Directors of the GSF. Thus securing continuity of the projects was a priority for the sound development of the research centre. In recent years, research at the GSF has focused on the health of humans in their environment - recognition of risks for human health from environmental factors, elucidation of mechanisms of disease development, and development of concepts - in order to protect human health and the natural basis of life. Substantial resources were invested in genome research, including in the German Mouse Clinic, biomedical translational approaches were initiated, programme-oriented funding was introduced, and new pathways were established for the transfer of results into practice. The 'mid term' review confirmed both the direction and excellence. The scientific achievements of the GSF are presented in detail in the following report, which, as in previous years, is arranged according to the reports of the institutes. Further, GSF scientists ensure that the most recent research results can flow into guidelines and new legislation by participating in national and international advisory commissions. GSF scientists are members of the Commission on Radiological Protection of the Federal Environment Ministry, in the MAK commission of the German Research Foundation, and in the ICRP (International Commission on Radiological Protection), to name but a few, and also act as scientific advisors for policy in the areas of medicine and data processing. (orig.)

GSF - Forschungszentrum fuer Umwelt und Gesundheit. Annual report 2004; GSF - Forschungszentrum fuer Umwelt und Gesundheit. Jahresbericht 2004

Energy Technology Data Exchange (ETDEWEB)

Wiedemann, M.; Haury, H.J.; Goedde, M.; Guldner, H.; Kettembeil, S.; Leser, B.; Meyer-Streng, O. (eds.)

2005-07-01

Recent years have been shaped by the introduction of programme-oriented funding. In 2004, we were able once again to focus on the real goal of the GSF, the performance of excellent research. The effects of fine particles, for example, are at the centre of public interest. This topic is not only of great importance for health, it also has a wide-reaching economic significance; we have only to think of filters for diesel engines. The GSF was involved in many scientific successes. For example, the results on the economic costs of smoking received considerable attention from both the general public and the scientific world. GSF scientists were involved in the decoding of the chicken genome and the discovery of a Parkinson gene. Together with university and other research organisations, they founded a Virtual Institute on Biotic Interactions, and took part in an international project on the development of combination vaccines against HIV. The setting up of the GSF 'glass laboratory', which was created with substantial support form the Helmholtz Association, is particularly worthy of mention. GSF scientists have been awarded various prizes, for example the Felix Wankel Prize awarded to Professor Jean-Marie Buerstedde. The Bavarian Advancement of Women Prize 2004, which distinguished exemplary initiatives in the area of family and women's advancement, was a special honour. Professor Magdalena Goetz was appointed Director of the Institute for Stem Cell Research. (orig.)

GSF - Forschungszentrum fuer Umwelt und Gesundheit. Annual report 2005; GSF - Forschungszentrum fuer Umwelt und Gesundheit. Jahresbericht 2005

Energy Technology Data Exchange (ETDEWEB)

Wiedemann, M; Haury, H J; Guldner, H; Kettembeil, S; Leser, B; Offenberger, M; Weiner, M [eds.

2006-07-01

The report for the year 2005 falls at a time of change in both the Scientific and Administrative Managing Directors of the GSF. Thus securing continuity of the projects was a priority for the sound development of the research centre. In recent years, research at the GSF has focused on the health of humans in their environment - recognition of risks for human health from environmental factors, elucidation of mechanisms of disease development, and development of concepts - in order to protect human health and the natural basis of life. Substantial resources were invested in genome research, including in the German Mouse Clinic, biomedical translational approaches were initiated, programme-oriented funding was introduced, and new pathways were established for the transfer of results into practice. The 'mid term' review confirmed both the direction and excellence. The scientific achievements of the GSF are presented in detail in the following report, which, as in previous years, is arranged according to the reports of the institutes. Further, GSF scientists ensure that the most recent research results can flow into guidelines and new legislation by participating in national and international advisory commissions. GSF scientists are members of the Commission on Radiological Protection of the Federal Environment Ministry, in the MAK commission of the German Research Foundation, and in the ICRP (International Commission on Radiological Protection), to name but a few, and also act as scientific advisors for policy in the areas of medicine and data processing. (orig.)

Heat transport the cold way

International Nuclear Information System (INIS)

Anon.

1981-01-01

A novel system for long-distance heat transport is being born in the 'Kernforschungsanlage Juelich' with the project being called 'Nukleare Fernenergie' (nuclear district energy). The project is also known as 'EVA/ADAM' [EVA = Einzelrohr-Versuchs-Anlage (single tube test facility); ADAM = Anlage mit Drei Adiabaten Methanisierungsreaktoren (plant provided with three adiabate methanising reactors)] and is based in principle on transport of energy in chemical bond within a closed loop. In the 60ies already this development was discussed both in the 'Kernforschungsanlage Juelich' and in the 'Rheinische Braunkohlenwerke' independent of each other. In 1975 these two organizations concluded a co-operation contract. (orig.) [de

Innovative electron-beam welding of high-melting metals

International Nuclear Information System (INIS)

Behr, W.; Reisgen, U.

2007-01-01

Since its establishment as nuclear research plant Juelich in the year 1956, the research centre Juelich (FZJ) is concerned with the material processing of special metals. Among those are, above all, the high-melting refractory metals niobium, molybdenum and tungsten. Electron beam welding has always been considered to be an innovative special welding method; in the FZJ, electron beam welding has, moreover, always been adapted to the increasing demands made by research partners and involved manufacturing and design sectors. From the manual equipment technology right up to highly modern multi-beam technique, the technically feasible for fundamental research has, this way, always been realised. (Abstract Copyright [2007], Wiley Periodicals, Inc.) [de

Consequences of the EU basic safety standards. Omission of the clearance for demolition/disposal with respect to the deconstruction projects of WAK GmbH

International Nuclear Information System (INIS)

Wittmann, S.

2013-01-01

The WAK GmbH's task is to decommission the nuclear installation projects at the KIT Campus Nord. These include the former Reprocessing Plant (WAK-Anlage), the Multi-purpose Research Reactor (MZFR), Research Reactor 2 (FR2), Compact Sodium-cooled Nuclear Reactor Facility (KNK), the Hot Cells (HZ) and some more small research facilities of the KIT. The buildings should be released by paragraph 29 German Radiation Protection Ordinance (StrlSchV) after the demolition of the process-engineering equipment. For this the clearance levels for 'demolition of buildings' Annex III Tab. 1 Column 10 (StrlSchV) must be reached, depth profiles were sampled on order to estimate how much material of the walls has to be removed to reach the values of the clearance levels. In a proposal (10926/12 ATO 90 SOC 501 SAN 149) on the basis of new scientific knowledge the EU plans to introduce clearance levels from the IAEA - ''Application of the Concepts of Exclusion, Exemption and Clearance RS-G-1.7''. In the proposal there are only clearance levels for an unrestricted release. Clearance levels for specific purpose (Annex III Tab. 1 Column 9a - 9d, 10 and 10a StrlSchV) are not named. A worst case scenario has been made what the possible effects are if the unrestricted release in the proposal of the basic safety standards from EU is guilty for every material. An estimation were done how much material and how much volume of building rubbish has to be removed to reach these new resulted clearance. Based on these volumes the caused additional financial costs for the final disposal for the WAK GmbH were calculated. (orig.)

Attenuation correction for hybrid MR/PET scanners: a comparison study

Energy Technology Data Exchange (ETDEWEB)

Rota Kops, Elena [Forschungszentrum Jülich GmbH, Jülich (Germany); Ribeiro, Andre Santos [Imperial College London, London (United Kingdom); Caldeira, Liliana [Forschungszentrum Jülich GmbH, Jülich (Germany); Hautzel, Hubertus [Heinrich-Heine-University Düsseldorf, Düsseldorf (Germany); Lukas, Mathias [Technische Universitaet Muenchen, Munich (Germany); Antoch, Gerald [Heinrich-Heine-University Düsseldorf, Düsseldorf (Germany); Lerche, Christoph; Shah, Jon [Forschungszentrum Jülich GmbH, Jülich (Germany)

2015-05-18

Attenuation correction of PET data acquired in hybrid MR/PET scanners is still a challenge. Different methods have been adopted by several groups to obtain reliable attenuation maps (mu-maps). In this study we compare three methods: MGH, UCL, Neural-Network. The MGH method is based on an MR/CT template obtained with the SPM8 software. The UCL method uses a database of MR/CT pairs. Both generate mu-maps from MP-RAGE images. The feed-forward neural-network from Juelich (NN-Juelich) requires two UTE images; it generates segmented mu-maps. Data from eight subjects (S1-S8) measured in the Siemens 3T MR-BrainPET scanner were used. Corresponding CT images were acquired. The resulting mu-maps were compared against the CT-based mu-maps for each subject and method. Overlapped voxels and Dice similarity coefficients, D, for bone, soft-tissue and air regions, and relative differences images were calculated. The true positive (TP) recognized voxels for the whole head were 79.9% (NN-Juelich, S7) to 92.1% (UCL method, S1). D values of the bone were D=0.65 (NN-Juelich, S1) to D=0.87 (UCL method, S1). For S8 the MHG method failed (TP=76.4%; D=0.46 for bone). D values shared a common tendency in all subjects and methods to recognize soft-tissue as bone. The relative difference images showed a variation of -10.9% - +10.1%; for S8 and MHG method the values were -24.5% and +14.2%. A preliminary comparison of three methods for generation of mu-maps for MR/PET scanners is presented. The continuous methods (MGH, UCL) seem to generate reliable mu-maps, whilst the binary method seems to need further improvement. Future work will include more subjects, the reconstruction of corresponding PET data and their comparison.

Attenuation correction for hybrid MR/PET scanners: a comparison study

International Nuclear Information System (INIS)

Rota Kops, Elena; Ribeiro, Andre Santos; Caldeira, Liliana; Hautzel, Hubertus; Lukas, Mathias; Antoch, Gerald; Lerche, Christoph; Shah, Jon

2015-01-01

Attenuation correction of PET data acquired in hybrid MR/PET scanners is still a challenge. Different methods have been adopted by several groups to obtain reliable attenuation maps (mu-maps). In this study we compare three methods: MGH, UCL, Neural-Network. The MGH method is based on an MR/CT template obtained with the SPM8 software. The UCL method uses a database of MR/CT pairs. Both generate mu-maps from MP-RAGE images. The feed-forward neural-network from Juelich (NN-Juelich) requires two UTE images; it generates segmented mu-maps. Data from eight subjects (S1-S8) measured in the Siemens 3T MR-BrainPET scanner were used. Corresponding CT images were acquired. The resulting mu-maps were compared against the CT-based mu-maps for each subject and method. Overlapped voxels and Dice similarity coefficients, D, for bone, soft-tissue and air regions, and relative differences images were calculated. The true positive (TP) recognized voxels for the whole head were 79.9% (NN-Juelich, S7) to 92.1% (UCL method, S1). D values of the bone were D=0.65 (NN-Juelich, S1) to D=0.87 (UCL method, S1). For S8 the MHG method failed (TP=76.4%; D=0.46 for bone). D values shared a common tendency in all subjects and methods to recognize soft-tissue as bone. The relative difference images showed a variation of -10.9% - +10.1%; for S8 and MHG method the values were -24.5% and +14.2%. A preliminary comparison of three methods for generation of mu-maps for MR/PET scanners is presented. The continuous methods (MGH, UCL) seem to generate reliable mu-maps, whilst the binary method seems to need further improvement. Future work will include more subjects, the reconstruction of corresponding PET data and their comparison.

TERENO-MED: Observation and Exploration Platform for Water Resources in the Mediterranean

Science.gov (United States)

Krueger, E.; Zacharias, S.; Friesen, J.; Vereecken, H.; Bogena, H.; Kallioras, A.

2012-04-01

Mediterranean region, the two initiating Helmholtz Centres, UFZ (Helmholtz Centre for Environmental Research) and Forschungszentrum Juelich, are seeking interested German and international partners to conduct joint research within the planned monitoring network.

Effects of fusion relevant transient energetic radiation, plasma and thermal load on PLANSEE double forged tungsten samples in a low-energy plasma focus device

Science.gov (United States)

Javadi, S.; Ouyang, B.; Zhang, Z.; Ghoranneviss, M.; Salar Elahi, A.; Rawat, R. S.

2018-06-01

Tungsten is the leading candidate for plasma facing component (PFC) material for thermonuclear fusion reactors and various efforts are ongoing to evaluate its performance or response to intense fusion relevant radiation, plasma and thermal loads. This paper investigates the effects of hot dense decaying pinch plasma, highly energetic deuterium ions and fusion neutrons generated in a low-energy (3.0 kJ) plasma focus device on the structure, morphology and hardness of the PLANSEE double forged tungsten (W) samples surfaces. The tungsten samples were provided by Forschungszentrum Juelich (FZJ), Germany via International Atomic Energy Agency, Vienna, Austria. Tungsten samples were irradiated using different number of plasma focus (PF) shots (1, 5 and 10) at a fixed axial distance of 5 cm from the anode top and also at various distances from the top of the anode (5, 7, 9 and 11 cm) using fixed number (5) of plasma focus shots. The virgin tungsten sample had bcc structure (α-W phase). After PF irradiation, the XRD analysis showed (i) the presence of low intensity new diffraction peak corresponding to β-W phase at (211) crystalline plane indicating the partial structural phase transition in some of the samples, (ii) partial amorphization, and (iii) vacancy defects formation and compressive stress in irradiated tungsten samples. Field emission scanning electron microscopy showed the distinctive changes to non-uniform surface with nanometer sized particles and particle agglomerates along with large surface cracks at higher number of irradiation shots. X-ray photoelectron spectroscopy analysis demonstrated the reduction in relative tungsten oxide content and the increase in metallic tungsten after irradiation. Hardness of irradiated samples initially increased for one shot exposure due to reduction in tungsten oxide phase, but then decreased with increasing number of shots due to increasing concentration of defects. It is demonstrated that the plasma focus device provides

Accident Testing of High Temperature Reactor Fuel Elements with the KueFA Device

International Nuclear Information System (INIS)

Seeger, O.; Laurie, M.; Bottomley, P.D.W.; Ferreira-Teixeira, A.E.; Van Winckel, S.; Rondinella, V.V.; Allelein, H.J.

2013-06-01

The High Temperature Reactor (HTR) is characterised by an advanced design with passive safety features. Fuel elements are constituted by a graphite matrix containing sub-mm-sized fuel particles with Tri-Isotropic (TRISO) coating, designed to provide high fission product retention. During a loss of coolant accident scenario in a HTR the maximum temperature is foreseen to be in the range of 1600-1650 deg. C, remaining well below the melting point of the fuel. The Cold Finger Apparatus (KueFA) is used to observe the combined effects of Depressurization and Loss of Forced Circulation (DLOFC) accident scenarios on HTR fuel. Originally designed at the Forschungszentrum Juelich (FZJ), an adapted KueFA operates on irradiated fuel in hot cell at JRC-ITU. A fuel pebble is heated in He atmosphere for several hundred hours, mimicking accident temperatures up to 1800 deg. C and realistic temperature transients. Non-gaseous volatile fission products released from the fuel condense on a water cooled stainless steel plate dubbed 'Cold Finger'. Exchanging plates frequently during the experiment and analysing plate deposits by means of HPGe gamma spectroscopy allows a reconstruction of the fission product release as a function of time and temperature. In order to achieve a good quantification of the release, a careful calibration of the setup is mandatory. An especially tailored collimator was designed to perform plate scanning with high spatial resolution, thus yielding information about the fission product distribution on the condensation plates. The analysis of condensation plates from recent KueFA tests shows that fission product release quantification is possible at high and low activity levels. Chemical dissolution has been performed for some condensation plates in order to assess beta nuclides of interest such as 90 Sr and possibly 129 I using an Inductively Coupled Plasma - Mass Spectrometer (ICP-MS) and to cross check the HPGe gamma spectroscopy measurements

Design and Fabrication of the Superconducting Bussystem for the Stellarator W7-X

International Nuclear Information System (INIS)

Sauer, M.; Giesen, B.; Charl, A.

2006-01-01

In the framework of cooperation with the Max-Planck-Institute for plasma physics (IPP) essential work packages of the superconducting stellarator Wendelstein 7-X (which is presently under construction at Greifswald, Germany) have been taken over by the Forschungszentrum Juelich (FZJ). One of these packages is the design, construction, qualification, manufacturing and assembly of the superconducting three-dimensional bussystem and its appropriate supports. An overall concept of the project was elaborated with the goal to optimize manufacturing steps, to simplify the system assembly and to provide easy transportation. In order to compensate the magnetic stray fields generated by the bus currents and to facilitate the bus assembly, a suitable bus topology was developed. For checking the geometry of the bent buses and to examine the buses assembly a 1:1 model of one W7-X section (72 o ) has been built. An insulation set up was developed and different samples have been fabricated. For qualification the insulation was examined as follows: - high voltage insulation checks including measurements of the Paschen firmness, - thermal tests and mechanical bending under cryo-temperatures at 77 K, - leakage and high pressure tests to simulate quench situations and - vacuum compatibilities of the materials and methods used. The design will be shown, calculation of magnetic fields and forces are presented. For series production of the 121 buses a production line has been installed. The fabrication process and its main appropriate steps will be presented: 1. Straightening of the superconductor on a rolling machine 2. Rounding on a special turning lathe, required to facilitate 3-dimensional bending 3. Bending on a 3-D-bending machine 4. Checking of geometry on the 1:1 model 5. Electrical insulation and conductive lacquer coat applied by hand 6. Vacuum and high voltage test at several pressure steps (Paschen test) inside bellow tube 7. Transportation in bundle of 6 buses to Greifswald

Manufacturing of microcomponents in a research institute under DIN EN ISO 9001

Science.gov (United States)

Maas, Dieter; Karl, Bernhard; Saile, Volker; Schulz, Joachim

2000-08-01

The Institute for Microstructure Technology at Forschungszentrum Karlsruhe has implemented a rigorous quality management system and was certified according to the DIN ISO EN 9001 standard in January 2000.

The QUENCH programme at Forschungszentrum Karlsruhe (FZK)

International Nuclear Information System (INIS)

Steinbrueck, M.; Schanz, G.; Sepold, L.; Stuckert, J.; Hering, W.; Homann, C.; Miassoedov, A.

2004-01-01

The QUENCH programme at FZK was launched to investigate the hydrogen source term during reflood of an overheated reactor core. It consists of large scale bundle experiments, separate-effects tests, modelling activities and application and validation of severe fuel damage (SFD) code systems. The paper describes the experimental part of the programme, namely the experimental facilities and test rigs as well as selected results obtained during the recent years. (author)

The stochastic-cooling system for COSY-Juelich

International Nuclear Information System (INIS)

Brittner, P.; Danzglock, R.; Hacker, H.U.; Maier, R.; Pfister, U.; Prasuhn, D.; Singer, H.; Spiess, W.; Stockhorst, H.

1991-01-01

The cooling in the Cooler Synchrotron COSY will work in the ranges: Band 1: 1 to 1.8 GHz, Band 2: 1.8 to 3 GHz. The system allows cooling in the energy range of 0.8 to 2.5 GeV. The stochastic-cooling system is under development. Cooling characteristics have been calculated. The tanks are similar to those of the CERN-AC. But the COSY parameters have required changes of the tank design. Active RF components have been developed for COSY. Measured results are presented

Development of a 10 kW PEM fuel cell for stationary applications

Energy Technology Data Exchange (ETDEWEB)

Barthels, H.; Mergel, J.; Oetjen, H.F. [Institute fuer Energieverfahrenstechnik (IEV), Juelich (Germany)] [and others

1996-12-31

A 10 kW Proton Exchange Membrane Fuel Cell (PEMFC) is being developed as part of a long-term energy storage path for electricity in the photovoltaic demonstration plant called PHOEBUS at the Forschungszentrum Julich.

Radioactive waste characterisation by neutron activation

International Nuclear Information System (INIS)

Nicol, Tangi

2016-01-01

Nuclear activities produce radioactive wastes classified following their radioactive level and decay time. an accurate characterization is necessary for efficient classification and management. Medium and high level wastes containing long lived radioactive isotopes will be stored in deep geological storage for hundreds of thousands years. at the end of this period, it is essential to ensure that the wastes do not represent any risk for humans and environment, not only from radioactive point of view, but also from stable toxic chemicals. This PhD thesis concerns the characterization of toxic chemicals and nuclear material in radioactive waste, by using neutron activation analysis, in the frame of collaboration between the Nuclear Measurement Laboratory of CEA Cadarache, France, and the Institute of Nuclear Waste Management and Reactor Safety of the research center, FZJ (Forschungszentrum Juelich GmbH), Germany. The first study is about the validation of the numerical model of the neutron activation cell MEDINA (FZJ), using MCNP Monte Carlo transport code. Simulations and measurements of prompt capture gamma rays from small samples measured in MEDINA have been compared for a number of elements of interest (beryllium, aluminum, chlorine, copper, selenium, strontium, and tantalum). The comparison was performed using different nuclear databases, resulting in satisfactory agreement and validating simulation in view of following studies. Then, the feasibility of fission delayed gamma-ray measurements of "2"3"9Pu and "2"3"5U in 225 L waste drums has been studied, considering bituminized or concrete matrixes representative of wastes produced in France and Germany. The delayed gamma emission yields were first determined from uranium and plutonium metallic samples measurements in REGAIN, the neutron activation cell of LMN, showing satisfactory consistency with published data. The useful delayed gamma signals of "2"3"9Pu and "2"3"5U, homogeneously distributed in the 225 L

Comparison of ASTECV1.3.2 and ASTECV2 results for QUENCH 12 test

International Nuclear Information System (INIS)

Stefanova, A.

2010-01-01

This paper presents a comparison of QUENCH 12 test calculated results with ASTECv1.3R2 and ASTECv2 computer codes. The test was performed to investigate the behavior of VVER fuel assemblies. This investigation is a part of the 6th and 7th framework programs of the EC supported ISTC program. The test facility is located at Forschungszentrum in Karlsruhe. The structure of the test facility allows experimental studies under transient and accident conditions. The ASTEC1.3R2 and ASTECv2 computer codes have been used to simulate the investigated test. The base line input model for ASTEC was provided from Forschungszentrum, Karlsruhe. During the preparation of QUENCH - 12 experiment, the input deck was adapted to new initial and boundary conditions. The comparison show good agreement between measured data and ASTEC calculated results. (author)

A PC-program for the calculation of neutron flux and element contents using the ki-method of neutron activation analysis

International Nuclear Information System (INIS)

Boulyga, E.G.; Boulyga, S.F.

2000-01-01

A computer program is described, which calculates the induced activities of isotopes after irradiation in a known neutron field, thermal and epithermal neutron fluxes from the measured induced activities and from nuclear data of 2-4 monitor nuclides as well as the element concentrations in samples irradiated together with the monitors. The program was developed for operation in Windows 3.1 (or higher). The application of the program for neutron activation analysis allows to simplify the experimental procedure and to reduce the time. The program was tested by measuring different types of standard reference materials at the FRJ-2 (Research Centre, Juelich, Germany) and Triga (University Mainz, Germany) reactors. Comparison of neutron flux parameters calculated by this program with those calculated by a VAX program developed at the Research Centre, Juelich was done. The results of testing seem to be satisfactory. (author)

Comparative analysis of three atmospheric dispersion coefficient systems at the Angra dos Reis, RJ, region; Analise comparativa de tres sistemas de coeficientes de dispersao atmosferica na regiao de Angra dos Reis, RJ

Energy Technology Data Exchange (ETDEWEB)

Biagio, Rosa Maria de Souza

1982-07-01

A comparative analysis was made in this work among Pasquill-Gifford (PG) atmospheric dispersion coefficients and those determined at the Juelich and Karlsruhe sites with the purpose of suggesting which one would be the most applicable to the Angra site. Each one of the three systems was determined by different experiments, carried out over sites with diversified features. The systems of Juelich and Karlsruhe were obtained over sites with high surface roughness and from stacks (elevated releases), while the PG system was obtained over sites with a small surface roughness and from ground level releases. The results of the application of these systems at a complex site like Angra,which has a highly diversified structure encompassing sea, vegetation, predominance of light winds and stable stability classes, show that the PG system, the most used in the world, is still the best choice. (author)

Comparative analysis of three atmospheric dispersion coefficient systems at the Angra dos Reis, RJ, region

International Nuclear Information System (INIS)

Biagio, Rosa Maria de Souza

1982-01-01

A comparative analysis was made in this work among Pasquill-Gifford (PG) atmospheric dispersion coefficients and those determined at the Juelich and Karlsruhe sites with the purpose of suggesting which one would be the most applicable to the Angra site. Each one of the three systems was determined by different experiments, carried out over sites with diversified features. The systems of Juelich and Karlsruhe were obtained over sites with high surface roughness and from stacks (elevated releases), while the PG system was obtained over sites with a small surface roughness and from ground level releases. The results of the application of these systems at a complex site like Angra,which has a highly diversified structure encompassing sea, vegetation, predominance of light winds and stable stability classes, show that the PG system, the most used in the world, is still the best choice. (author)

Neutronics and thermal hydraulics coupling scheme for design improvement of liquid metal fast systems

International Nuclear Information System (INIS)

Sanchez-Espinoza, V.H.; Jaeger, W.; Travleev, A.; Monti, L.; Doern, R.

2009-01-01

Many advanced reactor concepts are nowadays under investigations within the Generation IV international initiative as well as in European research programs including subcritical and critical fast reactor systems cooled by liquid metal, gas and supercritical water. The Institute of Neutron Physics and Reactor Technology (INR) at the Forschungszentrum Karlsruhe GmbH is involved in different European projects like IP EUROTRANS, ELSY, ESFR. The main goal of these projects is, among others, to assess the technical feasibility of proposed concepts regarding safety, economics and transmutation requirements. In view of increased computer capabilities, improved computational schemes, where the neutronic and the thermal hydraulic solution is iteratively coupled, become practicable. The codes ERANOS2.1 and TRACE are being coupled to analyze fuel assembly or core designs of lead-cooled fast reactors (LFR). The neutronic solution obtained with the coupled system for a LFR fuel assembly was compared with the MCNP5 solution. It was shown that the coupled system is predicting physically sound results. The iterative coupling scheme was realized using Perlscripts and auxiliary Fortran programs to ensure that the mapping between the neutronic and the thermal hydraulic part is consistent. The coupled scheme is very flexible and appropriate for the neutron physical and thermal hydraulic investigation of fuel assemblies and of cores of lead cooled fast reactors. The developed methods and the obtained results will be presented and discussed. (author)

Evaluation of ITER design criteria applied to RAFM steels. Final report tasks - TW2-TTMS-005b, D2 and TW5-TTMS-005, D8

International Nuclear Information System (INIS)

Sunyk, R.; Aktaa, J.

2006-08-01

In the first line, the aim of the activity represented in this work is an application of two advanced material models to a simulation of the test blanket module (TBM) undergoing cyclic thermal and mechanical loadings. The first model is thereby the ABAQUS standard combined non-linear isotropic-kinematic hardening model whereas the second is a viscoplastic material model considering material damage and being newly implemented as an ABAQUS user material (UMAT). Material parameters for both models are adjusted using results of isothermal tensile and cyclic experiments performed at Forschungszentrum Karlsruhe GmbH (FZK) on EUROFER 97. As is generally known, EUROFER 97 is an important blanket material for the future fusion reactor and belongs to reduced activation ferriticmartensitic steels (RAFM), which soften under cyclic loading in contrast to austenitic steels exhibiting cyclic hardening. Moreover, the work is focused on the application of some existing design rules considered for austenitic steels and further evaluation of the rules by comparison of their predictions with results of cyclic simulations using the advanced material models mentioned above. Thereby, some important allowable stress limits are calculated under consideration of the cyclic softening of RAFM. Finally, new considerations concerning a mock-up experiment allowing to verify the advanced material models used in the present work and to assess a capability of the actual TBM design are represented here. (orig.) [de

Reasons of an experimental effort for pebble bed reactors. A program of measurements in the CESAR reactor at Cadarache

Energy Technology Data Exchange (ETDEWEB)

Scherer, W; Bock, H J; Krings, F; Neef, R D; Langlet, G; Dixmier, M; Laponche, B; Morier, F

1972-06-15

An extended experimental program on neutron physics of HTR fuel balls is being performed in the graphite moderated critical faclity CESAR at CEN Cadarache (France). The experiments are done in the frame of a cooperation between KFA Juelich and CEA Cadarache.

Annual report of the nuclear safeguards project 1978

International Nuclear Information System (INIS)

Mache, H.R.

1980-05-01

The present report describes the major activities carried out in 1978 in the framework of the Nuclear Safeguards Project by the institutes of the Kernforschungszentrum Karlsruhe, Kernforschungsanlage Juelich, the European Institute of Transuranium Elements and some industrial firms. (orig.) [de

Baryon resonances in pion- and photon-induced hadronic reactions

International Nuclear Information System (INIS)

Roenchen, Deborah

2014-01-01

The aim of the present work is the analysis of the baryon spectrum in the medium-energy regime. At those energies, a perturbative treatment of Quantum Chromodynamics, that is feasible in the high-energy regime, is not possible. Chiral perturbation theory, the low-energy effective theory of the strong interaction, is limited to the lowest excited states and does not allow to analyze the complete resonance region. For the latter purpose, dynamical coupled-channel approaches provide an especially suited framework. In the present study, we apply the Juelich model, a dynamical coupled-channel model developed over the years, to analyze pion- and photon-induced hadronic reactions in a combined approach. In the Juelich model, the interaction of the mesons and baryons is built of t- and u-channel exchange diagrams based on an effective Lagrangian. Genuine resonances are included as s-channel states. The scattering potential is unitarized in a Lippmann-Schwinger-type equation. Analyticity is preserved, which is a prerequisite for a reliable extraction of resonance parameters in terms of pole positions and residues in the complex energy plane. Upon giving an introduction to the subject in Chap. 1 and showing selected results in Chap. 2, we will describe the simultaneous analysis of elastic πN scattering and the reactions π - p → ηn, K 0 Λ, K + Σ - , K 0 Σ 0 and π + p→K + Σ + within the Juelich framework in Chap. 3. The free parameters of the model are adjusted to the GWU/SAID analysis of elastic πN scattering and, in case of the inelastic reactions, to experimental data. Partial waves up to J=9/2 are included and we consider the world data set from threshold up to E∝2.3 GeV. We show our fit results compared to differential and total cross sections, to polarizations and to measurements of the spin-rotation parameter. Finally, we present the results of a pole search in the complex energy plane of the scattering amplitude and discuss the extracted resonance

Forschungszentrum Karlsruhe, Technik und Umwelt. Progress report 1994

International Nuclear Information System (INIS)

1995-01-01

The points of main effort which are discussed reflect the institution's R and D scheme. The summaries submitted by the different institutes and departments are compiled by the topics and fields they deal with. The report gives an account of the progress under each of the KfK R and D projects. This correlation facilitates comparisons between the targets and actual achievements and elucidates the general relation between the individual tasks which often are in the care of several institutes at a time. The departments and institutes and their respective tasks are introduced, and a comprehensive appendix is attached which lists the 1994 publications. (orig.) [de

Forschungszentrum Rossendorf, Institute of Radiochemistry. Annual report 1995

International Nuclear Information System (INIS)

Nitsche, H.

1996-02-01

The activities of the institute in the year 1995 are described by short communications. The themes of the chapters are: Speciation and migration of radionuclides; behaviour of colloids and aerosols; organic matter and their interaction with radionuclides; application of x-ray absorption spectroscopy; chemistry of heaviest elements. (SR)

Forschungszentrum Rossendorf, Institute of Radiochemistry. Annual report 1993

International Nuclear Information System (INIS)

Nitsche, H.; Bernhard, G.

1994-06-01

Since the founding of the Institute, a reorientation of the scientific direction was initiated: From the production and application of radioisotopes during the period before 1992 toward the new focus of radioecological research for risk assessment and remediation of radionuclide contaminations. The research relates to contamination problems from uranium mining in the German states of Saxony and Thuringia and in the neighboring Czech Republic, and from nuclear weapons production, testing, and accidents in the former Soviet Union. The new research direction of the Institute covers the essential aspects of radionuclide transport in the geo- and biosphere. It includes the distribution of radioactivity in ground- and surface waters and in air. We are studying the interaction of radioactive materials (a) at the interface between aqueous phase and rocks, minerals and soils, (b) the formation and distribution of colloids and aerosols, and (c) the mobilization and retardation of radionuclides through the interaction with organic contaminants and biological decay products. Our studies are essential for the successful development of environmental decontamination and remediation strategies. This report reflects the scientific transition of the Institute. The contributions to the section on ''Ecological Research'' are already focused toward the new challenge. The research that is summarized as ''General Research'' and ''Chemistry of the Heavy Elements'' clearly bear the elements of aerosol science. (orig.)

A polarized atomic-beam target for COSY-Juelich

International Nuclear Information System (INIS)

Eversheim, P. D.; Altmeier, M.; Felden, O.; Glende, M.; Walker, M.; Hiemer, A.; Gebel, R.

1998-01-01

An atomic-beam target (ABT) for the EDDA experiment has been built in Bonn and was tested for the very first time at the cooler synchrotron COSY. The ABT differs from the polarized colliding-beams ion source for COSY in the DC-operation of the dissociator and the use of permanent 6-pole magnets. At present the beam optics of the ABT is set-up for maximum density in the interaction zone, but for target-cell operation it can be modified to give maximum intensity. The modular concept of this atomic ground-state target allows to provide all vector- (and tensor) polarizations for protons and deuterons, respectively. Up to now the polarization of the atomic-beam could be verified by the EDDA experiment to be > or approx. 80% with a density in the interaction zone of > or approx. 10 11 atoms/cm 2

Status of the cooler synchrotron COSY Juelich. Papers

International Nuclear Information System (INIS)

1994-09-01

The eight papers present the status of COSY, operational characteristics of the COSY electron cooler, a broad-band multiple-harmonic acceleration structure, diagnostic tools, a stochastic cooling system, a narrow-band digital RF-noise generator, an RF-synthesizer, and a longitudinal phase space tracking of particles in a multiple harmonic RF-system. (DG)

Kernforschungsanlage Juelich, Institut fuer Kernphysik: Annual report 1983

International Nuclear Information System (INIS)

Baur, G.; Mayer-Boericke, C.; Schult, O.; Seyfarth, H.; Speth, J.; Turek, P.

1984-04-01

This annual report contains extended abstracts of the work performed at the named institute together with a list of publications. The abstracts deal with nuclear reactions, nuclear spectroscopy, atomic collisions, solar energy, and technical developments. See hints under the relevant topics. (HSI) [de

Enrichment technology. Dependable vendor of gas centrifuges; Enrichment Technology. Zuverlaessiger Lieferant von Gaszentrifugen

Energy Technology Data Exchange (ETDEWEB)

Anon.

2011-10-15

Enrichment Technology is an innovative, high-tech company that develops, manufactures and installs gas centrifuges for enriching uranium. In addition, Enrichment Technology designs enrichment plants that use gas centrifuge technology. This technology offers the most efficient and cost-effective method for enriching uranium yet: high-performance, safe technology that dominates the market with a global share of 45 percent. A determining factor in Enrichment Technology's success is its mission: supplying its customers with safe, reliable technology. Production of the centrifuges requires versatile know-how and collaboration between different departments as well as interdisciplinary teams at the various sites. More than 2000 operators at 8 sites in 5 countries contribute their individual knowledge and personal skills in order to produce this exceptional technology. The head office is in Beaconsfield near London and the operational headquarters are in Almelo in the Netherlands. There are other sites in Germany (Juelich und Gronau), Great Britain (Capenhurst) as well as project sites in the USA and France. Capenhurst is where experienced engineers design new enrichment plants and organise their construction. Centrifuge components are manufactured in Almelo and Juelich, while the pipework needed to connect up the centrifuges is produced at the site in Gronau. In Juelich, highly qualified scientists in interdisciplinary teams are continuously researching ways of improving the current centrifuges. Communication between specialists in the fields of chemistry, physics and engineering forms the basis for the company's success and the key to extending this leading position in the global enrichment market. (orig.)

Enrichment technology. Dependable vendor of gas centrifuges

International Nuclear Information System (INIS)

Anon.

2011-01-01

Enrichment Technology is an innovative, high-tech company that develops, manufactures and installs gas centrifuges for enriching uranium. In addition, Enrichment Technology designs enrichment plants that use gas centrifuge technology. This technology offers the most efficient and cost-effective method for enriching uranium yet: high-performance, safe technology that dominates the market with a global share of 45 percent. A determining factor in Enrichment Technology's success is its mission: supplying its customers with safe, reliable technology. Production of the centrifuges requires versatile know-how and collaboration between different departments as well as interdisciplinary teams at the various sites. More than 2000 operators at 8 sites in 5 countries contribute their individual knowledge and personal skills in order to produce this exceptional technology. The head office is in Beaconsfield near London and the operational headquarters are in Almelo in the Netherlands. There are other sites in Germany (Juelich und Gronau), Great Britain (Capenhurst) as well as project sites in the USA and France. Capenhurst is where experienced engineers design new enrichment plants and organise their construction. Centrifuge components are manufactured in Almelo and Juelich, while the pipework needed to connect up the centrifuges is produced at the site in Gronau. In Juelich, highly qualified scientists in interdisciplinary teams are continuously researching ways of improving the current centrifuges. Communication between specialists in the fields of chemistry, physics and engineering forms the basis for the company's success and the key to extending this leading position in the global enrichment market. (orig.)

Investigation and optimization of transverse non-linear beam dynamics in the high-energy storage ring HESR

Energy Technology Data Exchange (ETDEWEB)

Welsch, Dominic Markus

2010-03-10

The High-Energy Storage Ring (HESR) is part of the upcoming Facility for Antiproton and Ion Research (FAIR) which is planned as a major extension to the present facility of the Helmholtzzentrum fuer Schwerionenforschung (GSI) in Darmstadt. The HESR will provide antiprotons in the momentum range from 1.5 to 15 GeV/c for the internal target experiment PANDA. The demanding requirements of PANDA in terms of beam quality and luminosity together with a limited production rate of antiprotons call for a long beam life time and a minimum of beam loss. Therefore, an effective closed orbit correction and a sufficiently large dynamic aperture of the HESR are crucial. With this thesis I present my work on both of these topics. The expected misalignments of beam guiding magnets have been estimated and used to simulate the closed orbit in the HESR. A closed orbit correction scheme has been developed for different ion optical settings of the HESR and numerical simulations have been performed to validate the scheme. The proposed closed orbit correction method which uses the orbit response matrix has been benchmarked at the Cooler Synchrotron COSY of the Forschungszentrum Juelich. A chromaticity correction scheme for the HESR consisting of sextupole magnets has been developed to reduce tune spread and thus to minimize the emittance growth caused by betatron resonances. The chromaticity correction scheme has been optimized through dynamic aperture calculations. The estimated field errors of the HESR dipole and quadrupole magnets have been included in the non-linear beam dynamics studies. Investigations concerning their optimization have been carried out. The ion optical settings of the HESR have been improved using dynamic aperture calculations and the technique of frequency map analysis. The related diffusion coefficient was also used to predict long-term stability based on short-term particle tracking. With a reasonable reduction of the quadrupole magnets field errors and a

Electric Dipole Moments of Light Nuclei and the Implications for CP Violation

International Nuclear Information System (INIS)

Gibson, B.F.; Afnan, I.R.

2013-01-01

A definitive measurement of an electric dipole moment (EDM) would likely imply new physics beyond the standard model. Although the standard model strong interaction term could theoretically produce an EDM of any size, that it is constrained by the current neutron EDM limit to be some 10 orders of magnitude smaller than 1 suggests that the electroweak sector and CP violation will be the source of a measurable EDM. The weak interaction standard model EDM is itself orders of magnitude smaller than contemporary experiments can measure. Direct measurement of the neutron EDM lies in the next decade; measurement of the proton EDM could well come first. A BNL proposal for an electrostatic storage ring measurement lies in the offing. Unless the EDM proves to be an isoscalar, one will need other measurements to separate the isoscalar, isovector, and isotensor components. Measurement of a nuclear EDM will be required: 2 H, 3 H, or 3 He being the simplest nuclear systems. A storage ring measurement of the triton EDM could be accomplished in a manner analogous to that proposed for the proton. However, the deuteron EDM measurement offers certain advantages, even though the experiment would be more complex, involving electric and magnetic fields, than that required for the proton and triton. The COSY facility in the Forschungszentrum Juelich is almost an ideal facility to house such an experiment; one could also measure in the same ring the EDM for the proton and He. The deuteron is the one nucleus for which exact model calculations can easily be performed. We briefly explore the model dependence of deuteron EDM calculations. Using a separable potential formulation of the Hamiltonian, we examine the sensitivity of the deuteron EDM to variations in the nucleon–nucleon interaction, including contemporary potential models, and we explore the dependence upon intermediate state multiple scattering in the 3 P 1 channel. We investigate the tensor force contribution to the model

Department of Nuclear Reactions: Overview

International Nuclear Information System (INIS)

Rusek, K.

1998-01-01

(full text) During the last year our activities were spread over the three major domains: nuclear, atomic and material physics. The nuclear physics experimental programme covered a broad range of nuclear reactions induced by light and heavy ions. New experiments were performed at the compact C-30 cyclotron at Swierk, at University of Jyvaeskylae, GSI Darmstadt, LN Saturne. Prospects for future experiments on nucleon structure at Forschungszentrum Juelich were open. The collaboration with INR Kiev was tightened and work was done in order to prepare experiments at the C-200 heavy ion cyclotron in Warsaw. An effort to install the ion guide isotope separator on line (IGISOL) at the C-200 cyclotron has also to be mentioned A half a year stay of Dr. Nicholas Keeley in the Department, who received The Royal Society/Polish Academy of Science grant, resulted in many interesting results on breakup of light nuclei. Details can be found in the short abstracts presented in this report. As far as atomic physics is concerned, the activity of a group lead by Prof. Marian Jaskola yielded various new results. The experiments were performed at the University of Erlangen, in close collaboration with the Pedagogical University in Kielce and the University of Basel. Fast neutrons generated in the 3 H(d,n) 4 He reaction induced by the 2 MeV deuteron beam from the Van der Graaff accelerator at the Department were used to calibrate solid state-nuclear-track detectors. This was a very good year for material physics research: Jan Kaczanowski and Slawomir Kwiatkawski received Ph.D. degrees based on dissertation research performed in the material physics research programme, while Pawel Kolodziej completed his MSc. thesis in collaboration with the Institute of Electronic Materials Technology in Warsaw, Research Center Karlsruhe, University of Jena and CSNSM Orsay many results were obtained. Lech Nowicki and Prof. Andrzej Turos were awarded by the Director of the IPJ prizes for their scientific

Department of Nuclear Reactions: Overview

International Nuclear Information System (INIS)

Rusek, K.

2002-01-01

Full text: Department of Nuclear Reactions has had a very productive year. We have carried out our work in close collaborations with physicists from many laboratories, home and foreign. The following reports cover three major domains of our activities: nuclear, material and atomic physics. * Nuclear physics: In collaboration with scientists from Ukraine experimental studies of nuclear reaction induced by heavy ions from the Warsaw Cyclotron have been performed. The aim of the experiments is to study nuclear reactions leading to the exotic light nuclei in exit channels and energy dependence of the nucleus - nucleus interactions. Proton induced charge-exchange reactions were investigated theoretically by means of multistep-direct model. Good agreement with the experimental data was achieved. A novel approach to the problem of the nuclear liquid → gas phase transition was proposed, based on synergetics - a domain of science dealing with self-organization in macroscopic systems. Decay properties of the Roper resonance were studied. Final analysis of the analysing powers for the polarized deuterons scattered on protons was accomplished. Experimental programme of the near-threshold meson production in proton - proton scattering has been started in collaboration with Forschungszentrum. Juelich. * Atomic physics: Spectra of the X-rays emitted by energetic sulphur ions scattered off carbon atoms were analysed in order to study the role of the multiple charge states of the inner shells in the dynamics of the collision process. Ionization probabilities in collision of oxygen ions with gold atoms were measured. The observed disagreement of the experimental data with the theoretical predictions suggest a strong effect generated by the sub-shell couplings. * Materials research: Ion channelling method was applied to investigate transformation of the defects in Al x Ga 1-x As crystalline layers. Activities of our colleagues in didactics have grown considerably. Lectures

Large Scale Model Test Investigation on Wave Run-Up in Irregular Waves at Slender Piles

DEFF Research Database (Denmark)

Ramirez, Jorge Robert Rodriguez; Frigaard, Peter; Andersen, Thomas Lykke

2013-01-01

An experimental large scale study on wave run-up generated loads on entrance platforms for offshore wind turbines was performed. The experiments were performed at GrosserWellenkanal (GWK), Forschungszentrum Küste (FZK) in Hannover, Germany. The present paper deals with the run-up heights determin...

An airship for the research. A zeppelin flies in scientific mission for the climate research over southern and northern Europe; Ein Luftschiff fuer die Forschung

Energy Technology Data Exchange (ETDEWEB)

Anon.

2012-07-01

In may 2012 the hitherto greatest scientific mission of a NT zeppelin starts. The Juelich institute for energy and climate research (IEK-8) coordinates thereby the numerous experiments aboard. The special: Especially for the research the ZLT Zeppelin Luftschifftechnik in Friedrichshafen builds a new airship.

Research report 1976. Pt. 2

International Nuclear Information System (INIS)

1976-01-01

The research report describes the work of the faculties of Bochum university in 1976, the so-called 'overlapping institutes' and the special research sectors 'biological signal reception and processing', ('Bionach'), 'plasma physics Bochum/Juelich', and the institute for development research and policies. (HK) [de

Nuclear safeguards project

International Nuclear Information System (INIS)

Mache, H.R.

1978-10-01

The present report describes the major activities carried out in 1977 in the framework of the Nuclear Safeguards Project by the institutes of the Kernforschungszentrum Karlsruhe, Kernforschungsanlage Juelich, the European Institute of Transuranium Elements and some industrial firms. (orig.) 891 HP 892 AP [de

Research report 1976. Pt. 1

International Nuclear Information System (INIS)

1976-01-01

The research report describes the work of the faculties of Bochum university in 1976, the so-called 'overlapping institutes' and the special research sectors 'biological signal reception and processing', ('Bionach'), 'plasma physics Bochum/Juelich', and the insitute for development research and policies. (HK) [de

Preliminary design analysis of the ALT-II limiter for TEXTOR

International Nuclear Information System (INIS)

Koski, J.A.; Boyd, R.D.; Kempka, S.M.; Romig, A.D. Jr.; Smith, M.F.; Watson, R.D.; Whitley, J.B.; Conn, R.W.; Grotz, S.P.

1983-01-01

Installation of a large toroidal belt pump limiter, Advanced Limiter Test II (ALT-II), on the TEXTOR tokamak at Juelich, FRG is anticipated for early 1986. This paper discusses the preliminary mechanical design and materials considerations undertaken as part of the feasibility study phase for ALT-II

Determination of the deposition of polycyclic aromatic hydrocarbons (PAHs) to soil at Scheyern and Kirchheim near Munich; Bestimmung der Eintraege von polyzyklischen aromatischen Kohlenwasserstoffen (PAHs) an den Standorten Scheyern und Kirchheim bei Muenchen

Energy Technology Data Exchange (ETDEWEB)

Krainz, A; Wiedenmann, M; Maguhn, J [GSF-Forschungszentrum fuer Umwelt und Gesundheit Neuherberg (Germany). Inst. fuer Oekologische Chemie

1998-12-31

Task force 1, ``Analysis of the exposure of soils``, carried out comprehensive and site-specific measurements of the transfer of environmental chemicals into soil by means of the example of s-triazines and polycyclic aromatic hydrocarbons (PAHs). This work was in four parts: a: Determination of PAH nuisance concentrations in selected sites (Juelich, Scheyern, Bad Lauchstaedt); b: Measurement of wet deposition, development and use of methods for the determination of dry deposition; c: Statements regarding large-area PAH transfer into soil in Germany; d: Modelling of the rates of dry deposition. (orig.) [Deutsch] Aufgabe der Arbeitsgruppe 1 `Belastungsanalyse von Boeden`: Flaechendeckende sowie standortbezogene Erfassung der Eintraege von Umweltchemikalien am Beispiel der s-Triazine und PAHs. a: Bestimmung der Immissionskonzentrationen von PAHs an den Schwerpunktstandorten (Juelich, Scheyern, Bad Lauchstaedt) b: Messung der Nassen Deposition, Entwicklung und Anwendung von Methoden zur Bestimmung der Trockenen Deposition c: Aussagen ueber flaechendeckende Eintraege von PAHs in der Bundesrepublik d: Modellierung der Trockendepositionsraten. (orig.)

Determination of the deposition of polycyclic aromatic hydrocarbons (PAHs) to soil at Scheyern and Kirchheim near Munich; Bestimmung der Eintraege von polyzyklischen aromatischen Kohlenwasserstoffen (PAHs) an den Standorten Scheyern und Kirchheim bei Muenchen

Energy Technology Data Exchange (ETDEWEB)

Krainz, A.; Wiedenmann, M.; Maguhn, J. [GSF-Forschungszentrum fuer Umwelt und Gesundheit Neuherberg (Germany). Inst. fuer Oekologische Chemie

1997-12-31

Task force 1, ``Analysis of the exposure of soils``, carried out comprehensive and site-specific measurements of the transfer of environmental chemicals into soil by means of the example of s-triazines and polycyclic aromatic hydrocarbons (PAHs). This work was in four parts: a: Determination of PAH nuisance concentrations in selected sites (Juelich, Scheyern, Bad Lauchstaedt); b: Measurement of wet deposition, development and use of methods for the determination of dry deposition; c: Statements regarding large-area PAH transfer into soil in Germany; d: Modelling of the rates of dry deposition. (orig.) [Deutsch] Aufgabe der Arbeitsgruppe 1 `Belastungsanalyse von Boeden`: Flaechendeckende sowie standortbezogene Erfassung der Eintraege von Umweltchemikalien am Beispiel der s-Triazine und PAHs. a: Bestimmung der Immissionskonzentrationen von PAHs an den Schwerpunktstandorten (Juelich, Scheyern, Bad Lauchstaedt) b: Messung der Nassen Deposition, Entwicklung und Anwendung von Methoden zur Bestimmung der Trockenen Deposition c: Aussagen ueber flaechendeckende Eintraege von PAHs in der Bundesrepublik d: Modellierung der Trockendepositionsraten. (orig.)

Stratigraphy, sedimentology and bulk organic geochemistry of black ...

Indian Academy of Sciences (India)

Stratigraphy, sedimentology and bulk organic geochemistry of black shales from the Proterozoic. Vindhyan Supergroup (central India). S Banerjee1,∗. , S Dutta. 2. , S Paikaray. 1 and U Mann. 2. 1. Department of Earth Sciences, Indian Institute of Technology Bombay, Powai, Mumbai 400 076, India. 2. Forschungszentrum ...

Annual report 1980

International Nuclear Information System (INIS)

1981-01-01

The work performed at the Forschungszentrum Seibersdorf is divided into five basic areas: energy and nuclear safety; new technologies and methods; world defence, health and maintenance; development and information; and planning and coordination. These areas are briefly described and various projects within them are outlined. (G.T.H.)

Micro powder-injection moulding of metals and ceramics

Indian Academy of Sciences (India)

Development of micro-MIM/-CIM was started at Forschungszentrum Karlsruhe with the aim of creating a process suitable for a wide range of materials as well as for medium-scale and large-scale production of micro components. Using enhanced machine technology and special tempering procedures, this process enables ...

The Nijmegen hyperon-nucleon potentials

International Nuclear Information System (INIS)

Timmermans, R.

1994-01-01

The Nijmegen YN potential models are reviewed. Differences with the models constructed by the Juelich group are highlighted. A mini- review is given of the status of the scalar mesons and their relevance for the NN and YN interactions. Finally, the reactions bar NN → bar YY are discussed

B2-B2.5 code benchmarking

Energy Technology Data Exchange (ETDEWEB)

Dekeyser, W.; Baelmans, M; Voskoboynikov, S.; Rozhansky, V.; Reiter, D.; Wiesen, S.; Kotov, V.; Boerner, P.

2011-01-15

ITER-IO currently (and since about 15 years) employs the SOLPS4.xxx code for its divertor design, currently version SOLPS4.3. SOLPS.xxx is a special variant of the B2-EIRENE code, which was originally developed by an European consortium (FZ Juelich, AEA Culham, ERM Belgium/KU Leuven) in the late eighties and early nineties of the last century under NET contracts. Until today even the very similar edge plasma codes within the SOLPS family, if run on a seemingly identical choice of physical parameters, still sometimes disagree significantly with each other. It is obvious that in computational engineering applications, as they are carried out for the various ITER divertor aspects with SOLPS4.3 for more than a decade now, any transition from one to another code must be fully backward compatible, or, at least, the origin of differences in the results must be identified and fully understood quantitatively. In this report we document efforts undertaken in 2010 to ultimately eliminate the third issue. For the kinetic EIRENE part within SOLPS this backward compatibility (back until 1996) was basically achieved (V. Kotov, 2004-2006) and SOLPS4.3 is now essentially up to date with the current EIRENE master maintained at FZ Juelich. In order to achieve a similar level of reproducibility for the plasma fluid (B2, B2.5) part, we follow a similar strategy, which is quite distinct from the previous SOLPS benchmark attempts: the codes are ''disintegrated'' and pieces of it are run on smallest (i.e. simplest) problems. Only after full quantitative understanding is achieved, the code model is enlarged, integrated, piece by piece again, until, hopefully, a fully backward compatible B2 / B2.5 ITER edge plasma simulation will be achieved. The status of this code dis-integration effort and its findings until now (Nov. 2010) are documented in the present technical note. This work was initiated in a small workshop by the three partner teams of KU Leuven, St. Petersburg

Untitled

Indian Academy of Sciences (India)

Small angle neutron scattering from helium bubbles in metals. F CARSUGH. Institut für Festkörperforschung, Forschungszentrum Jülich, D-52425 Jülich, Germany. Abstract. Small angle neutron Scattering (SANS) has been widely used in investigating defects in metals, and in particular, to characterize the helium bubble ...

Observed OH and HO2 concentrations in the upper troposphere inside and outside of Asian monsoon influenced air.

Science.gov (United States)

Marno, D. R.; Künstler, C.; Hens, K.; Tatum Ernest, C.; Broch, S.; Fuchs, H.; Martinez, M.; Bourtsoukidis, E.; Williams, J.; Holland, F.; Hofzumahaus, A.; Tomsche, L.; Fischer, H.; Klausner, T.; Schlager, H.; Eirenschmalz, L.; Stratmann, G.; Stock, P.; Ziereis, H.; Roiger, A.; Bohn, B.; Zahn, A.; Wahner, A.; Lelieveld, J.; Harder, H.

2016-12-01

The Asian monsoon convectively transports pollutants like volatile organic compounds (VOCs), NOx, and SO2 from the boundary layer over South Asia into the upper troposphere where they can potentially enter the stratosphere, or be dispersed globally. Therefore, it is crucial to understand the oxidizing capacity of this system regarding the rate of aerosol formation, and conversion of pollutants into compounds that have much shorter atmospheric lifetimes. OH plays a central role in this oxidation process. During the OMO-ASIA campaign in the summer of 2015, OH and HO2 were measured onboard the High Altitude Long-Range (HALO) Research Aircraft. Two laser-induced fluorescence instruments based on the fluorescence assay by gas expansion technique (LIF-FAGE) had been deployed, the AIR-LIF instrument from Forschungszentrum Jülich GmbH and the HORUS instrument from the Max Planck Institute for Chemistry, Mainz. To measure the chemical background of OH potentially produced inside the HORUS instrument from highly oxidized VOCs, atmospheric OH is scavenged by an Inlet Pre-injector (IPI) system. This was the first time an IPI system was implemented within an airborne LIF-FAGE instrument measuring OH and HO2. Throughout this campaign OH and HO2 were measured at 12 to 15km within the Asian monsoon anticyclone. These measurements have been contrasted by probing air outside the anticyclone in air masses influenced by North American emissions, and in very clean air masses originated from the southern hemisphere.

The forward detector of the ANKE spectrometer. Tracking system and its use in data analysis

International Nuclear Information System (INIS)

Dymov, S.; Erven, W.; Kacharava, A.

2004-01-01

The tracking system of the forward detector of the ANKE magnetic spectrometer at the internal beam of the accelerator COSY (Juelich, Germany) is described. Data analysis procedures, including track search and momentum reconstruction, are presented, and the performance of the tracking system is illustrated with the use of experimental data

AGF activieties in the field of systems analysis and technology assessment

International Nuclear Information System (INIS)

1983-01-01

Activities of the following West German organisation in the field of systems analysis are reviewed: Kernforschungsanlage Juelich (KFA), Kernforschungszentrum Karlsruhe (KfK), Deutsche Forschungs- und Versuchsanstalt fuer Luft- und Raumfahrt (DFVLR), Gesellschaft fuer Strahlen- und Umweltforschung (GSF), Gesellschaft fuer Mathematik und Datenverarbeitung (GMD), Max-Planck-Institut fuer Plasmaphysik (IPP). (UA) [de

Quality Control Samples for the Radiological Determination of Tritium in Urine Samples

International Nuclear Information System (INIS)

Ost'pezuk, P.; Froning, M.; Laumen, S.; Richert, I.; Hill, P.

2004-01-01

The radioactive decay product of tritium is a low energy beta that cannot penetrate the outer dead layer of human skin. Therefore , the main hazard associated with tritium is internal exposure. In addition, due to the relatively long half life and short biological half life, tritium must be ingested in large amounts to pose a significant health risk. On the other hand, the internal exposure should be kept as low as practical. For incorporation monitoring of professional radiation workers the quality control is of utmost importance. In the Research Centre Juelich GmbH (FZJ) a considerable fraction of monitoring by excretion analysis relates to the isotope Tritium. Usually an aliquot of an urine sample is mixed with a liquid scintillator and measured in a liquid scintillation counter. Quality control samples in the form of three kind of internal reference samples (blank, reference samples with low activity and reference sample with elevated activity) were prepared from a mixed, Tritium (free) urine samples. 1 ml of these samples were pipetted into a liquid scintillation vial. In the part of theses vials a known amounts of Tritium were added. All these samples were stored at 20 degrees. Based on long term use of all these reference samples it was possible to construct appropriate control charts with the upper and lower alarm limits. Daily use of these reference samples decrease significantly the risk for false results in original urine with no significant increase of the determination time. (Author) 2 refs

GSF - Forschungszentrum fuer Umwelt und Gesundheit. Annual report 2003

International Nuclear Information System (INIS)

Wiedemann, M.; Haury, H.J.; Goedde, M.; Guldner, H.; Kettembeil, S.; Leser, B.; Meyer-Streng, O.

2004-01-01

The GSF develops scientific principles that provide the basis for protecting human health and the natural basis of life for the future. GSF health research focuses on the genetic and immunological basis of molecular protection and define and their dysfunction during disease development, and the identification of new factors that contribute to sickness or health. (orig.)

GSF-Forschungszentrum fuer Umwelt und Gesundheit. Annual report '95

International Nuclear Information System (INIS)

Haury, H.J.

1996-01-01

As a center for environmental sciences, the major field of work of the GSF is research into and performance of complex and multidisciplinary problems and tasks. The annual report of the year 1995 presents compact surveys of the activities and results achieved in the three major research areas of ecology and biology (investigation of effects and response), environmental engineering, and human health (epidemiology a.o.). The various reports of the institutes, departments and project groups cover annual surveys as well as topical information, (ecosystems in agriculture), and information on the development of the infrastructure. (DG) [de

GSF - Forschungszentrum fuer Umwelt und Gesundheit. Annual report 2005

International Nuclear Information System (INIS)

Wiedemann, M.; Haury, H.J.; Guldner, H.; Kettembeil, S.; Leser, B.; Offenberger, M.; Weiner, M.

2006-01-01

The report for the year 2005 falls at a time of change in both the Scientific and Administrative Managing Directors of the GSF. Thus securing continuity of the projects was a priority for the sound development of the research centre. In recent years, research at the GSF has focused on the health of humans in their environment - recognition of risks for human health from environmental factors, elucidation of mechanisms of disease development, and development of concepts - in order to protect human health and the natural basis of life. Substantial resources were invested in genome research, including in the German Mouse Clinic, biomedical translational approaches were initiated, programme-oriented funding was introduced, and new pathways were established for the transfer of results into practice. The 'mid term' review confirmed both the direction and excellence. The scientific achievements of the GSF are presented in detail in the following report, which, as in previous years, is arranged according to the reports of the institutes. Further, GSF scientists ensure that the most recent research results can flow into guidelines and new legislation by participating in national and international advisory commissions. GSF scientists are members of the Commission on Radiological Protection of the Federal Environment Ministry, in the MAK commission of the German Research Foundation, and in the ICRP (International Commission on Radiological Protection), to name but a few, and also act as scientific advisors for policy in the areas of medicine and data processing. (orig.)

GSF - Forschungszentrum fuer Umwelt und Gesundheit. Annual report 2001

International Nuclear Information System (INIS)

Haury, H.J.; Wiedemann, M.; Goedde, M.; Guldner, H.; Kettembeil, S.; Meyer-Streng, O.; Weiner, M.

2002-01-01

Nothing has moved the GSF in recent years as much as the structural change that has taken place within the Helmholtz Association, and the associated introduction of a system of programme-oriented support. The members of the Scientific-Technical Board and the staff of the Scientific-Technical Department have been and still are particularly strongly involved in the process. We also wish the new President of the Helmholtz Association, Professor Kroell, the skills and good fortune needed to lead our mother organisation in a future that is determined by scientific competition and remarkable scientific achievement, and not marked by administration and new bureaucratic impediments. While these discussions, so important for the future of the GSF, have been proceeding, scientific research has of course continued successfully. One good example is genome research. The GSF not only contributes a decisive part of the research within the Helmholtz Association, it also makes an important contribution at both the national and international scales. The GSF has paid particular attention for years to the question of technology transfer. (orig.)

Forschungszentrum Rossendorf, Institute of Safety Research. Annual report 2003

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

The work of the institute is directed to the assessment and enhancement of the safety of technical plants and to the increase of the efficiency and environmental sustainability of those facilities. Subjects of investigation are equally nuclear plants and installations of process industries. To achieve the goals mentioned, the institute is mainly engaged in the scientific fields of thermal fluid dynamics including magneto-hydrodynamics (MHD) and materials sciences. In 2003, the ISR worked on the following main scientific projects. Sub-programme: Plant and Rector Safety. Project: accident analysis of nuclear reactors, safety of materials and components, particle and radiation transport, safety and efficiency of chemical processes. Sub-programme: Thermal Fluid Dynamics. Project: magneto-hydrodynamics, thermal fluid dynamics of multiphase systems. Considerable progress could also be achieved in the CFD simulation of two-phase flows. New approaches for the forces acting on steam bubbles in a water flow could be developed and implemented into the CFX code in close cooperation with the CFX developer ANSYS/CFX. The qualified models allow to simulate the evolution of bubble size specific radial void distribution profiles along the flow path. These theoretical studies and the related experiments at the Rossendorf TOPFLOW test facility represent an important part of the German CFD network that aims at the improvement of thermal hydraulic calculation methods in reactor safety. (orig.)

Forschungszentrum Rossendorf, Institute of Safety Research. Annual report 1997

Energy Technology Data Exchange (ETDEWEB)

Weiss, F P; Rindelhardt, U [eds.

1998-10-01

The research work of the institute aims at the assessment and increase of the safety of technical facilities. Subject of the investigation are equally nuclear plants and installations of process industries. To analyse thermo-fluiddynamic phenomena of accident scenarios physical models and computer codes are developed as well for multi-phase and multi-component flows as for the time and space dependent power release (neutron kinetics in light water reactors, reaction kinetics of exothermic chemical reactions). Emphasis is put on the description of spatial flows and the transient evolution of flow patterns. (orig.)

Forschungszentrum Rossendorf, Institute of Safety Research. Annual report 2003

International Nuclear Information System (INIS)

2004-01-01

The work of the institute is directed to the assessment and enhancement of the safety of technical plants and to the increase of the efficiency and environmental sustainability of those facilities. Subjects of investigation are equally nuclear plants and installations of process industries. To achieve the goals mentioned, the institute is mainly engaged in the scientific fields of thermal fluid dynamics including magneto-hydrodynamics (MHD) and materials sciences. In 2003, the ISR worked on the following main scientific projects. Sub-programme: Plant and Rector Safety. Project: accident analysis of nuclear reactors, safety of materials and components, particle and radiation transport, safety and efficiency of chemical processes. Sub-programme: Thermal Fluid Dynamics. Project: magneto-hydrodynamics, thermal fluid dynamics of multiphase systems. Considerable progress could also be achieved in the CFD simulation of two-phase flows. New approaches for the forces acting on steam bubbles in a water flow could be developed and implemented into the CFX code in close cooperation with the CFX developer ANSYS/CFX. The qualified models allow to simulate the evolution of bubble size specific radial void distribution profiles along the flow path. These theoretical studies and the related experiments at the Rossendorf TOPFLOW test facility represent an important part of the German CFD network that aims at the improvement of thermal hydraulic calculation methods in reactor safety. (orig.)

Forschungszentrum Rossendorf, Institute of Safety Research. Annual report 1999

International Nuclear Information System (INIS)

Weiss, F.P.; Rindelhardt, U.

2000-02-01

The work of the institute is directed to the assessment and enhancement of the safety of large technical plants and to the increase of the effectiveness and environmental sustainability of those facilities. Subjects of investigations are equally nuclear plants and installations of process industries. To achieve the above mentioned goals, the institute is engaged in two scientific fields, i.e. thermo-fluiddynamics including magneto-hydrodynamics (MHD) and materials/components safety. (orig.)

Forschungszentrum Rossendorf, Institute of Safety Research. Annual report 2001

International Nuclear Information System (INIS)

Weiss, F.P.; Rindelhardt, U.

2002-06-01

In the reporting period, the ISR performed 9 meetings and workshops with international participation. It is especially worth mentioning the workshop on 'Process Control and Condition Monitoring in Chemical Plants' that was conducted for the first time, and the concluding conference of the DFG Innovationskolleg 'Magneto-Hydrodynamics of Electrically Conducting Fluids'. At the ROCOM test facility (Rossendorf Coolant Mixing facility), a large series of experiments was performed dedicated to coolant mixing phenomena in PWRs during boron dilution and cold water transients. CFD models were validated against those experiments and a so called semi-analytical mixing model was developed. By coupling that semi-analytical model with the DYN3D reactor dynamics code it could be shown that a shut down reactor gets re-critical when a plug of 36 m 3 deionated water enters the core after switching on the first main coolant pump. However, that deionated plug does not lead to non-allowed high coolant pressure or fuel temperatures. The behavior of a RPV lower callotte during a severe accident with melt slumping into the lower plenum is studied in 1:10 test at Royal Institute of Technology Stockholm. At the ISR computational methods were developed for pre- and post-test calculations of those experiments in order to predict the time and mode of RPV failure. The temperature, as well as location, and time of the RPV failure were found in good agreement with the experiment. Two patents resulted from those studies. One of them proposes a creep stool to mechanically support the RPV deformed by creeping, and the flooding of the reactor pit for ex vessel cooling of the melt inside the vessel. Such measures extend the time till RPV failure and offer the possibility for additional accident management procedures that can prevent the RPV meltthrough. The MHD department of ISR was especially successful in 2001. In the framework of the Bundesministerium fuer Bildung und Forschung (BMBF) initiative 'Innovative Gruenderlabore' they were granted an amount of 750,000 DM to be able permanently to create the conditions for applied and market relevant developments that allow young scientists to found their own private technology business. (orig.)

Forschungszentrum Rossendorf, Institute of Safety Research. Annual report 1996

International Nuclear Information System (INIS)

Weiss, F.P.; Rindelhardt, U.

1997-08-01

The research of the institute aims at the safety assessment of the design of nuclear and chemical facilities, the development of accident management procedures, and the increase of operational safety by improved plant surveillance. Physical models and computer codes are developed for multiphase/multicomponent flows and for the space and time dependent power release in nuclear and chemical reactors to be able to analyse the thermo-fluiddynamic phenomena during assumed accident scenarios. Emphasis is particularly focussed on spatial flow phenomena and the time dependent change of flow patterns. Sustainable void fraction probes and tomographic systems are developed to measure those parameters of two phase flows that characterize the exchange of pulse, energy and mass between the phases and components. The research related to materials safety is directed to the behaviour of components exposed to neutron and gamma radiation. The susceptibility to irradiation induced embrittlement and the behaviour of annealed material during reirradiation are investigated by fracture mechanical methods in dependence on the materials composition. The work on process and plant diagnostics makes available basic methods for early failure detection and operational monitoring which are important means of accident prevention. Recent initiatives of the institute are concerned with the transport of pollutants in the geosphere. Particularly, codes are developed for the simulation of physical and chemical processes during the transport of pollutants in unsaturated zones of the soil. (orig.)

Forschungszentrum Rossendorf, Institute of Safety Research. Annual report 1996

Energy Technology Data Exchange (ETDEWEB)

Weiss, F P; Rindelhardt, U [eds.

1997-08-01

The research of the institute aims at the safety assessment of the design of nuclear and chemical facilities, the development of accident management procedures, and the increase of operational safety by improved plant surveillance. Physical models and computer codes are developed for multiphase/multicomponent flows and for the space and time dependent power release in nuclear and chemical reactors to be able to analyse the thermo-fluiddynamic phenomena during assumed accident scenarios. Emphasis is particulary focussed on spatial flow phenomena and the time dependent change of flow patterns. Sustainable void fraction probes and tomographic systems are developed to measure those parameters of two phase flows that characterize the exchange of pulse, energy and mass between the phases and components. The research related to materials safety is directed to the behaviour of components exposed to neutron and gamma radiation. The susceptibility to irradiation induced embrittlement and the behaviour of annealed material during reirradiation are investigated by fracture mechanical methods in dependence on the materials composition. The work on process and plant diagnostics makes available basic methods for early failure detection and operational monitoring which are important means of accident prevention. Recent initiatives of the institute are concerned with the transport of pollutants in the geosphere. Particularly, codes are developed for the simulation of physical and chemical processes during the transport of pollutants in unsaturated zones of the soil. (orig.)

Forschungszentrum Rossendorf, Institute for Safety Research. Annual report 1994

International Nuclear Information System (INIS)

Weiss, F.P.; Rindelhardt, U.

1995-06-01

Striving for the assessment and enhancement of design based safety, for improving operational safety, and for risk management IFS is engaged in the following methodical fields: - Experimental and theoretical thermo-fluiddynamics, - 3-dimensional neutron kinetics, - characterization of the mechanical behaviour of aged materials and microstructural analysis, -transport calculations of particle and radiation fields, - early failure diagnostics of processes and plants, - hazard ranking of non-nuclear waste deposits and support of the selection of appropriate remediation procedures by means of decision analysis. In 1994, special efforts were directed to the extension of experimental facilities needed for radioactive materials testing and for two phase flow investigations. Moreover, first research projects on the safety of VVER reactors could successfully be finished. (orig./HP)

Forschungszentrum Rossendorf, Institute for Safety Research. Annual report 1995

International Nuclear Information System (INIS)

Weiss, F.P.; Rindelhardt, U.

1996-09-01

The scientific work of the Institute of Safety Research covers a wide range of safety related investigations. During 1995 important results on thermo-fluid dynamic single effects, thermalhydraulics and neutron kinetics for accident analysis, materials safety, simulation of radiation and particle transport, mechanical integrity of technical systems and process monitoring, risk management for waste deposits, magneto-hydrodynamics of conductive fluids, and of renewable energies were reached. The annual report presents also lists of publications, conference contributions, meetings, and workshops. (DG)

Forschungszentrum Rossendorf, Institute for Safety Research. Annual report 1993

International Nuclear Information System (INIS)

Weiss, F.P.; Rindelhardt, U.

1994-06-01

Seven of the 10 selected reports describe computer codes for the analysis of accident scenarios at the Russian VVER type reactors, irradiation induced defect structures, neutron fluence calculations, acoustic leak detection using neural networks, diagnostics and modelling of component vibration of VVER reactors, and a specification of a technical system to improve the operational monitoring of Zaporoche-5 reactor. The other 3 reports show a computer simulation of a plasma source, an decision analysis for the assessment of risks with conventional and radioactive wastes, and investigations on renewable energy systems. (DG)

GSF - Forschungszentrum fuer Umwelt und Gesundheit. Annual report 1998

International Nuclear Information System (INIS)

Haury, H.J.; Wiedemann, M.; Grill, A.; Guldner, H.; Kettembeil, S.; Knauer, R.; Meyer-Streng, O.; Weiner, M.

1999-01-01

The research fields of the GSF in 1998 were as follows. Behaviour and fate of foreign compounds in the environment, biogeochemical cycles and signalling in terrestrial and aquatic systems, risk assessment and management in ecosystems, biological effects of chemicals and radiation on the cellular level, genome analysis and genetic predisposition, influence of the environment on differentiation, development and carcinogenesis, health risk resulting from internal and external exposure, basic research on the improvement of diagnostic and therapeutical methods, clinical-experimental research on diagnosis and therapy, improvement of efficacy and cost effectiveness in public health care. Separate abstracts were prepared for seven sections of this report [de

ENSTAR detector for η-mesic studies

Indian Academy of Sciences (India)

We have initiated a search for a new type of nuclear matter, the -mesic nucleus, using beams from the multi-GeV hadron facility, COSY at Juelich, Germany. A large acceptance ... The layers are used to generate - spectra for particle identification and total energy information of stopped particles. The granularity of the ...

HelmholtzZentrum Muenchen Deutsches Forschungszentrum fuer Gesundheit und Umwelt. Annual report 2011; HelmholtzZentrum Muenchen Deutsches Forschungszentrum fuer Gesundheit und Umwelt. Jahresbericht 2011

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-11-01

The contribution under consideration is the annual report 2011 of the German Research Centre for Environmental Health (HelmholtzZentrum Munich, Federal Republic of Germany). The most important component of this annual report are the scientific highlights according to the following topics: (1) Systems researches for the health (M. Hrabe de Angelis); (2) Mechanisms of the interaction between genes and environment (M. Goetz); (3) Research of the metabolism (M. Tschoep); (4) Research of lungs and allergies (O. Eickelberg); (5) Technologies for the bio medicine (V. Ntziachristos); (6) Natural basis of existence (J. Durner).

Bilateral cooperation between Germany and Brazil on fuel irradiation

International Nuclear Information System (INIS)

Dias, J.W.

1977-01-01

Within the framework of the Government Agreement on Scientific and Technical Cooperation between the Federal Republic of Germany and Brazil, the Brazilian National Atomic Commission and the Juelich Nuclear Research Center (KFA) signed on 23rd April, 1971 an Agreement on Cooperation in the field of Nuclear Research and Reactor Technology. Projects have been elaborated in fields of mutual interest to share activities between the partner institutes in both countries. A typical project is the fuel irradiation programme jointly prepared by NUCLEBRAS and KFA-Juelich. Brazil is planning to use elements of its own production in nuclear power plants to be erected within the German-Brazilian Industrial Agreement. As no material test reactor is available in Brazil it is expedient to irradiate samples of Brazilian production in Germany. Brazilian collaborators will participate in the preparation, execution and post-irradiation examination. In this way an optimum transfer of all information and results is assured. In the first phase, sample rods manufactured in Brazil are irradiated in the FRJ-2 test reactor in Juelich. These rods are assembled under clean conditions in the NUCLEBRAS research centres. The first Brazilian test rods showed excellent in-pile behaviour even under very high fuel rod capacity. In the second phase, fuel rods of original length manufactured and assembled in Brazil will be irradiated in German power plants, and, at the same time, additional irradiations of small samples will be carried out in test reactors. In the third phase, rod clusters and complete fuel elements will be manufactured in Brazil and irradiated in German power plants until target burn-up. All the necessary prerequisites have been fulfilled to meet the above requirements, i.e. mutual interest, good infrastructure maintained by both partners, qualified personnel and last but not least unbureaucratic and effective help by the coordinating offices of NUCLEBRAS and KFA

IN15 ultra-high-resolution spin-echo project. First experiment

Energy Technology Data Exchange (ETDEWEB)

Schleger, P; Hayes, C [Institut Max von Laue - Paul Langevin (ILL), 38 - Grenoble (France); Kollmar, A [Forschungszentrum Juelich GmbH (Germany)

1997-04-01

The IN15 project is a collaboration between the ILL, HMI (Berlin), and FZ (Juelich) to construct a spin-echo spectrometer with a fourier time-range surpassing half a microsecond. Three different operational modes are possible: normal, with neutron focusing, and time-of-flight. Present status of the project is described. (author). 3 refs.

IFMIF High Flux Test Module-Recent progress in design and manufacturing

International Nuclear Information System (INIS)

Leichtle, D.; Arbeiter, F.; Dolensky, B.; Fischer, U.; Gordeev, S.; Heinzel, V.; Ihli, T.; Lang, K.-H.; Moeslang, A.; Simakov, S.P.; Slobodchuk, V.; Stratmanns, E.

2008-01-01

The International Fusion Material Irradiation Facility (IFMIF) is an accelerator driven neutron source for irradiation tests of candidate fusion reactor materials. Within the High Flux Test Module (HFTM) a testing volume of 0.5 l filled by qualified small scale specimens will be irradiated at displacement rates of 20-50 dpa/fpy in structural materials. The Forschungszentrum Karlsruhe (FZK) has developed a HFTM design which closely follows the design premise of maximising the space available for irradiation specimens in the IFMIF high flux zone and in addition allows keeping the temperature nearly constant in the rigs containing the specimen. Complementary analyses on nuclear, thermo-hydraulics and mechanical performance of the HFTM were performed to optimize the design. The present paper highlights the main design characteristics as well as recent progress achieved in this area. The contribution also includes (i) recommendations for the use of container, rig and capsule materials, and (ii) a description of the fabrication routes for the entire HFTM including brazing and filling procedures which are currently under development at the Forschungszentrum Karlsruhe

IFMIF High Flux Test Module-Recent progress in design and manufacturing

Energy Technology Data Exchange (ETDEWEB)

Leichtle, D. [Association FZK-EURATOM, Forschungszentrum Karlsruhe, Institut fuer Reaktorsicherheit, Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen (Germany)], E-mail: leichtle@irs.fzk.de; Arbeiter, F.; Dolensky, B.; Fischer, U.; Gordeev, S.; Heinzel, V.; Ihli, T.; Lang, K.-H. [Association FZK-EURATOM, Forschungszentrum Karlsruhe, Institut fuer Reaktorsicherheit, Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen (Germany); Moeslang, A. [Association FZK-EURATOM, Forschungszentrum Karlsruhe, Institut fuer Materialforschung, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Simakov, S.P.; Slobodchuk, V.; Stratmanns, E. [Association FZK-EURATOM, Forschungszentrum Karlsruhe, Institut fuer Reaktorsicherheit, Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen (Germany)

2008-12-15

The International Fusion Material Irradiation Facility (IFMIF) is an accelerator driven neutron source for irradiation tests of candidate fusion reactor materials. Within the High Flux Test Module (HFTM) a testing volume of 0.5 l filled by qualified small scale specimens will be irradiated at displacement rates of 20-50 dpa/fpy in structural materials. The Forschungszentrum Karlsruhe (FZK) has developed a HFTM design which closely follows the design premise of maximising the space available for irradiation specimens in the IFMIF high flux zone and in addition allows keeping the temperature nearly constant in the rigs containing the specimen. Complementary analyses on nuclear, thermo-hydraulics and mechanical performance of the HFTM were performed to optimize the design. The present paper highlights the main design characteristics as well as recent progress achieved in this area. The contribution also includes (i) recommendations for the use of container, rig and capsule materials, and (ii) a description of the fabrication routes for the entire HFTM including brazing and filling procedures which are currently under development at the Forschungszentrum Karlsruhe.

Thermalhydraulic and material specific investigations into the realization of an Accelerator Driven System (ADS) to transmute minor actinides. 1999 Status report

International Nuclear Information System (INIS)

Knebel, J.U.; Cheng, X.; Mueller, G.; Schumacher, G.; Konys, J.; Wedemeyer, O.; Groetzbach, G.; Carteciano, L.

2000-10-01

At Forschungszentrum Karlsruhe an HGF Strategy Fund Project entitled ''Thermalhydraulic and Material Specific Investigations into the Realization of an accelerator-driven system (ADS) to Transmute Minor Actinides'' is performed which is funded by the Hermann von Helmholtz-Gemeinschaft Deutscher Forschungszentren (HGF) in the section ''Energy Research and Energy Technology'' over a time period from 07/1999 to 06/2002 with a financial support of 7.0 million DM (35 man years). The objective of this HGF Strategy Fund Project is the development of new methods and technologies to design and manufacture thin-walled thermally highly-loaded surfaces (e.g. beam window) which are cooled by a corrosive heavy liquid metal (lead-bismuth eutectic). The beam window is a vital component of an ADS spallation target. The results of this project will provide the scientific-technical basis which allows the conception and the design of an ADS spallation target and later on a European Demonstrator of an ADS system. The work performed at Forschungszentrum Karlsruhe is embedded in a broad European research and development programme on ADS systems. (orig.)

Management of aging in technical facilities of E.ON Kernkraft plants; Alterungsmanagement bei technischen Einrichtungen in Anlagen der E.ON Kernkraft GmbH

Energy Technology Data Exchange (ETDEWEB)

Reese, Sven H.; Brast, Gerhard [E.ON Kernkraft GmbH, Hannover (Germany); Schoeckle, Friedrich [AMTEC Messtechnischer Service GmbH, Lauffen/N (Germany)

2009-11-15

The publication explains, by means of specific measures, the management of aging in technical facilities as practiced in the plants of E.ON Kernkraft GmbH. First, the historical background is outlined and the reasons for introducing management of aging in order to limit and control factors influencing the lifetime of nuclear power plants are described. This is followed by a definition of management of aging in important safety-related facilities as against lifetime management of technical systems relevant to plant availability. This is the context in which the scope of the survey of continuous management of aging is defined in respect of physical aging. A classification is then made in accordance with the staggered requirements to be met in the quality of technical facilities. On the basis of the quality to be assured, the different component groups are assigned corresponding operational measures and explained. These continuous measures extend from failure-oriented maintenance to preventive maintenance to the integrity concept for technical installations. To document the findings and evaluate the effectiveness of the measures taken, the integration of the process is described and reference is made to continuous optimization according to PDCA principles. The explicit introduction of the process of management of aging creates a platform which allows a documentation to be accumulated of the manifold and comprehensive measures taken to control phenomena of aging in technical installations. (orig.)

Developments for the TOF Straw Tracker

Energy Technology Data Exchange (ETDEWEB)

Ucar, A.

2006-07-01

COSY-TOF is a very large acceptance spectrometer for charged particles using precise information on track geometry and time of flight of reaction products. It is an external detector system at the Cooler Synchrotron and storage ring COSY in Juelich. In order to improve the performance of the COSY-TOF, a new tracking detector ''Straw Tracker'' is being constructed which combines very low mass, operation in vacuum, very good resolution, high sampling density and very high acceptance. A comparison of pp{yields}d{pi}{sup +} data and a simulation using the straw tracker with geometry alone indicates big improvements with the new tracker. In order to investigate the straw tracker properties a small tracking hodoscope ''cosmic ray test facility'' was constructed in advance. It is made of two crossed hodoscopes consisting of 128 straw tubes arranged in 4 double planes. For the first time Juelich straws have been used for 3 dimensional reconstruction of cosmic ray tracks. In this illuminating field the space dependent response of scintillators and a straw tube were studied. (orig.)

Developments for the TOF Straw Tracker

International Nuclear Information System (INIS)

Ucar, A.

2006-01-01

COSY-TOF is a very large acceptance spectrometer for charged particles using precise information on track geometry and time of flight of reaction products. It is an external detector system at the Cooler Synchrotron and storage ring COSY in Juelich. In order to improve the performance of the COSY-TOF, a new tracking detector ''Straw Tracker'' is being constructed which combines very low mass, operation in vacuum, very good resolution, high sampling density and very high acceptance. A comparison of pp→dπ + data and a simulation using the straw tracker with geometry alone indicates big improvements with the new tracker. In order to investigate the straw tracker properties a small tracking hodoscope ''cosmic ray test facility'' was constructed in advance. It is made of two crossed hodoscopes consisting of 128 straw tubes arranged in 4 double planes. For the first time Juelich straws have been used for 3 dimensional reconstruction of cosmic ray tracks. In this illuminating field the space dependent response of scintillators and a straw tube were studied. (orig.)

Stoner vs. spin-mixing behavior in the bulk magnetism of Gd: A spin ...

Indian Academy of Sciences (India)

bulk magnetism of Gd: A spin-resolved photoemission study. K MAITI1,2,∗. , M C MALAGOLI2, A DALLMEYER2 and C CARBONE2,3. 1Tata Institute of Fundamental Research, Homi Bhabha Road, Mumbai 400 005, India. 2Institut für Festkörperforschung, Forschungszentrum Jülich, D-52428 Jülich, Germany. 3Consiglio ...

Measurements in CESAR on the cold pebble bed experiments. Interpretation of fine structure and absorber rod measurements

Energy Technology Data Exchange (ETDEWEB)

Scherer, W; Hecker, R; Kirch, N; Krings, F; Neef, R D; Langlet, G

1973-10-15

In the framework of a cooperation between KFA-Juelich and CEA France in 1972 a critical HTR-experiment with spherical fuel elements has been performed in the critical facility CESAR at CEN Cadarache. The experiments were done in order to test the validity of several computer codes in the field of nuclear design of HTR power plants.

Study of the production of heavy Λ hypernuclei in the (p,, K+) reaction below the N-N threshold and of their decay

International Nuclear Information System (INIS)

Schult, O.W.B.; Borgs, W.; Gotta, D.; Hamacher, A.; Koch, H.R.; Ohm, H.; Riepe, R.; Seyfarth, H.; Sistemich, K.; Drueke, V.; Filges, D.; Jarczyk, L.; Kistryn, S.; Smyrski, J.; Strzalkowski, A.; Styczen, B.; Brentano, P. von

1991-01-01

An experiment is briefly described which we are preparing for the study of heavy Λ hypernuclei, their formation in the (p, K + ) reaction, their Λ decay half life and other Λ decay features. The planned recoil shadow measurement of fission fragments is expected to yield the required background discrimination. The experiment uses the unique features of COSY-Juelich

Characterisation and development of fine porosity in magnesium potassium phosphate ceramics

Czech Academy of Sciences Publication Activity Database

Viani, Alberto; Radulescu, A.; Pérez-Estébanez, Marta

2015-01-01

Roč. 161, December (2015), s. 628-630 ISSN 0167-577X R&D Projects: GA MŠk(CZ) LO1219 Keywords : amorphous materials * chemically-bonded ceramics * microstructure * Rietveld-RIR method * small-angle neutron scattering * specific surface area Subject RIV: AL - Art, Architecture, Cultural Heritage Impact factor: 2.437, year: 2015 https://juser.fz-juelich.de/record/255737

Energy and economic optimization of a membrane-based oxyfuel steam power plant

International Nuclear Information System (INIS)

Nazarko, Yevgeniy

2015-01-01

Carbon capture and storage is one technological option for reducing CO 2 emissions. The oxyfuel process is based on the combustion of fossil fuels in an oxygen-flue gas atmosphere with the subsequent concentration of CO 2 . The oxygen is produced by cryogenic air separation with an energy demand of 245 kWh el /t O2 . The application of ceramic membranes has the potential to reduce the specific energy demand of oxygen supply with consistently high-purity oxygen. This work focuses on - determining the efficiency of an advanced oxyfuel steam power plant that can be constructed today using membranes for oxygen production, - investigating and quantifying the potential for energy optimizing the overall process by changing its flow structure, - assessing the feasibility of individual optimization options based on their investment costs under market conditions. For this work, a method developed by Forschungszentrum Juelich and patented on 25 April 2012 under EP 2214806 is used. The Oxy-Vac-Juel concept is integrated into the oxyfuel steam power plant with simple process management using standardized power plant components. The net efficiency of the base power plant is 36.6 percentage points for an oxygen separation degree of 60 %. This corresponds to a net power loss of 9.3 percentage points compared to the reference power plant without CO 2 capture. The specific electricity demand of this oxygen supply method is 176 kWh el /t O2 . To increase the efficiency, the flow structure of the base power plant is optimized using industrially available components from power plant and process engineering. The 22 analyzed optimization options consist of design optimization of the gas separation process, the modification of the flue gas recirculation and the plant-internal waste heat utilization. The energetic advantage over the base power plant, depending on the optimization option, ranges from 0.05 - 1.00 percentage points. For each optimization option, the size and cost of the power

Investigations of glass sealing and reactive air brazing materials for joining high temperature solid oxide fuel cells by dilatometric examinations; Anwendung dilatometrischer Messungen bei der Entwicklung von Glasloten und reaktiven Metallloten zum Fuegen von Hochtemperaturbrennstoffzellen

Energy Technology Data Exchange (ETDEWEB)

Reichle, M.S. [Parker Hannifin GmbH, Bietigheim-Bissingen (Germany); Federmann, D. [Forschungszentrum Juelich GmbH, ZAT, Juelich (Germany); Reisgen, U. [RWTH Aachen University, ISF, Aachen (Germany); Koppitz, T.

2011-03-15

The principle of operation of solid oxide fuel cells (SOFCs) is very simple. However, the fact that very different materials are used for the individual components requires advanced thermal joining techniques to join them in a functional manner. Two very distinct designs have established themselves for the two different intended applications: decentralised power generation (stationary SOFCs) on the one hand, and power converters for vehicles (mobile SOFCs) on the other hand. As a consequence, alternative techniques for joining the individual components are also required. The principal joining process for the stationary SOFC design consists of joining individual steel plates with a glass sealant in an electrically insulating way so that they form an SOFC stack. For the mobile fuel cell design, the SOFC stack consists of individual thin steel cassettes. The window frame of the cassettes, which is made of ferritic chromium steel, is brazed to the ceramic layer of the zirconium oxide solid electrolyte using a filler metal. The material used is a silver-based brazing filler metal which contains only small amounts of copper oxide (CuO) and titanium hydride (TiH{sub 2}) as wetting agents. Both joining processes must be applicable in normal atmospheric air, i. e. under oxidative conditions. R and D activities continue for improving the efficiency and long-term operational stability of the technology to such an extent that SOFCs will become ready for the energy sector market. The two joining techniques described cannot yet be considered standard processes. They, too, will require continuous improvement with respect to reproducibility, endurance and strength of the joints. The Special Joining Techniques working group at Forschungszentrum Juelich uses specially modified dilatometric techniques as suitable quick replacement methods for studying and measuring the joining characteristics of the materials without having to manufacture complex and expensive SOFC stacks. The

Insights Gained from Testing Alternate Cell Designs

International Nuclear Information System (INIS)

O'Brien, J.E.; Stoots, C.M.; Herring, J.S.; Housley, G.K.; Sohal, M.S.; Milobar, D.G.; Cable, Thomas

2009-01-01

The Idaho National Laboratory (INL) has been researching the application of solid-oxide electrolysis cell for large-scale hydrogen production from steam over a temperature range of 800 to 900 C. The INL has been testing various solid oxide cell designs to characterize their electrolytic performance operating in the electrolysis mode for hydrogen production. Some results presented in this report were obtained from cells, initially developed by the Forschungszentrum Juelich and now manufactured by the French ceramics firm St. Gobain. These cells have an active area of 16 cm2 per cell. They were initially developed as fuel cells, but are being tested as electrolytic cells in the INL test stands. The electrolysis cells are electrode-supported, with ∼10 (micro)m thick yttria-stabilized zirconia (YSZ) electrolytes, ∼1400 (micro)m thick nickel-YSZ steam-hydrogen electrodes, and manganite (LSM) air-oxygen electrodes. The experiments were performed over a range of steam inlet mole fractions (0.1 to 0.6), gas flow rates, and current densities (0 to 0.6 A/cm2). Steam consumption rates associated with electrolysis were measured directly using inlet and outlet dewpoint instrumentation. On a molar basis, the steam consumption rate is equal to the hydrogen production rate. Cell performance was evaluated by performing DC potential sweeps at 800, 850, and 900 C. The voltage-current characteristics are presented, along with values of area-specific resistance as a function of current density. Long-term cell performance is also assessed to evaluate cell degradation. Details of the custom single-cell test apparatus developed for these experiments are also presented. NASA, in conjunction with the University of Toledo, has developed another fuel cell concept with the goals of reduced weight and high power density. The NASA cell is structurally symmetrical, with both electrodes supporting the thin electrolyte and containing micro-channels for gas diffusion. This configuration is

Mechanistic studies on the OH-initiated atmospheric oxidation of selected aromatic hydrocarbons

Energy Technology Data Exchange (ETDEWEB)

Nehr, Sascha

2012-07-01

Benzene, toluene, the xylenes, and the trimethylbenzenes are among the most abundant aromatic trace constituents of the atmosphere mainly originating from anthropogenic sources. The OH-initiated atmospheric photo-oxidation of aromatic hydrocarbons is the predominant removal process resulting in the formation of O{sub 3} and secondary organic aerosol. Therefore, aromatics are important trace constituents regarding air pollution in urban environments. Our understanding of aromatic photo-oxidation processes is far from being complete. This work presents novel approaches for the investigation of OH-initiated atmospheric degradation mechanisms of aromatic hydrocarbons. Firstly, pulsed kinetic studies were performed to investigate the prompt HO{sub 2} formation from OH+ aromatic hydrocarbon reactions under ambient conditions. For these studies, the existing OH reactivity instrument, based on the flash photolysis/laser-induced fluorescence (FP/LIF) technique, was extended to the detection of HO{sub 2} radicals. The experimental design allows for the determination of HO{sub 2} formation yields and kinetics. Results of the pulsed kinetic experiments complement previous product studies and help to reduce uncertainties regarding the primary oxidation steps. Secondly, experiments with aromatic hydrocarbons were performed under atmospheric conditions in the outdoor atmosphere simulation chamber SAPHIR (Simulation of Atmospheric PHotochemistry In a large Reaction chamber) located at Forschungszentrum Juelich. The experiments were aimed at the evaluation of up-to-date aromatic degradation schemes of the Master Chemical Mechanism (MCMv3.2). The unique combination of analytical instruments operated at SAPHIR allows for a detailed investigation of HO{sub x} and NO{sub x} budgets and for the determination of primary phenolic oxidation product yields. MCMv3.2 deficiencies were identified and most likely originate from shortcomings in the mechanistic representation of ring

GASFLOW computer code (physical models and input data)

International Nuclear Information System (INIS)

Muehlbauer, Petr

2007-11-01

The GASFLOW computer code was developed jointly by the Los Alamos National Laboratory, USA, and Forschungszentrum Karlsruhe, Germany. The code is primarily intended for calculations of the transport, mixing, and combustion of hydrogen and other gases in nuclear reactor containments and in other facilities. The physical models and the input data are described, and a commented simple calculation is presented

Benefits and hazards of nuclear power

International Nuclear Information System (INIS)

Barnert, H.; Borsch, P.; Feldmann, A.; Merz, E.; Muench, E.; Oesterwind, D.; Voss, A.; Wolters, J.

1979-09-01

Compilation of a seminar at the KFA Juelich on topical problems of nuclear power. Subjects: Energy demand, its expected development and possibilities of coverage; physical fundamentals and technical realisation of power generation by nuclear fission; fuel cycle problems and solutions; effects of radioactive radiation; safety of nuclear power plants and the nuclear hazard as compared with other hazards. (orig./RW) [de

Can the Σ-nn system be bound?

International Nuclear Information System (INIS)

Stadler, A.; Gibson, B.F.

1994-01-01

Motivated by the Σ-hypernuclear states reported in (K - ,π ± ) experiments, we have explored the possibility that there exists a particle-stable Σ - nn bound state. For the Juelich A hyperon-nucleon, realistic-force model, our calculations yield little reason to expect a positive-parity bound state or resonance in either the J=1/2 or the J=3/2 channels

The EDDA experiment: proton-proton elastic scattering excitation functions at intermediate energies

International Nuclear Information System (INIS)

Hinterberher, F.

1996-01-01

The EDDA experiment is designed to provide a high precision measurement of proton-proton elastic scattering excitation functions ranging from 0.5 to 2.5 GeV of (lab) incident kinetic energy. It is an internal target experiment utilizing the proton beam of the cooler synchrotron COSY operated by KFA Juelich. The excitation functions are measured during the acceleration ramp of COSY. (author)

International workshop on calorimeter simulation

International Nuclear Information System (INIS)

Filges, D.; Cloth, P.

1988-10-01

The aim of the Juelich workshop was to provide an overview of the state of calorimeter simulation and the methods used. This resulted in 29 contributions to the following topics: Code systems relevant to calorimeter simulation, vectorization and code speed-up, simulation of calorimeter experiments, special applications of calorimeter simulation. This report presents the viewgraphs of the given talks. (orig./HSI)

Results of Cesar II critical facility with low enriched fuel balls

Energy Technology Data Exchange (ETDEWEB)

Langlet, G; Guerange, J; Laponche, B; Morier, F; Neef, R D; Bock, H J; Kring, F J; Scherer, W

1972-06-15

The Cesar facility has been transformed to load in its center a pebble bed fuel. This new Cesar assembly is called Cesar II. The program for the measurements with HTR type fuel balls is managed under a cooperation between physicists of CEA/CADARACHE and KFA/JUELICH. A description of the measuring zones of Cesar II and of the experimental results is given.

Forschungszentrum Karlsruhe Technik und Umwelt. Research and development programme 1999

International Nuclear Information System (INIS)

1999-01-01

The Karlsruhe Research Center is a national research establishment placed under the responsibility of the Federal Republic of Germany and the Federal Land of Baden-Wuerttemberg, and as a member of the Hermann von Helmholtz-Gemeinschaft Deutscher Forschungszentren belongs to the most important and independent research centers in Germany working in the fields of the natural sciences and engineering sciences. The center's research and development activities are defined in coordination with the policy and programmes of the two responsible Federal and Land Governments and span the range from pre-industrial research through to product and process development, research of a provident nature, and fundamental scientific research work, with almost all R and D activities of the center relating in one way or other to technology and the environment. The research programme of the center today covers subjects and aspects relating to the environment, energy, key technologies, and fundamental research, whereas at the time the center was founded, nuclear science and engineering was the dominating field of activities. The current spectrum of activities reflects the evolution in the past and is characterized by a great complexity of problems involved, which requires cross-disciplinary cooperation, and foresight in the definition of tasks and time horizons. (orig./CB) [de

Forschungszentrum Karlsruhe Technik und Umwelt. Research and development program 2002

International Nuclear Information System (INIS)

2001-01-01

The five main fields of research and the activities under the R and D program 2002 are explained in great detail in five chapters with the following captions: 1. ENVIRONMENT. Programs: - Sustainable development, energy and environmental engineering (UMWELT). - Earth atmosphere and climate research (ATMO). 2. PUBLIC HEALTH. Programs: - Biomedical research (BIOMED). - Medical engineering (MEDTECH). 3. ENERGY. Programs: - Thermonuclear fusion (FUSION). - Nuclear safety (NUKLEAR). 4. KEY TECHNOLOGIES. Programs: - Microsystems engineering (MIKRO). - Nanotechnology (NANO). - Materials science (MATERIAL). - Chemical process engineering (CHEMIE). - Superconductivity (SUPRA). 5. MATTER and STRUCTURE. Program: The structure of matter (STRUKTUR). The sixth chapter presents cross-cutting activities under the program: Technology transfer and marketing (TTM). The concluding chapter lists and briefly presents the activities of the scientific and technical institutes of the Karlsruhe Research Center. (CB) [de

Forschungszentrum Rossendorf, Institut fuer Ionenstrahlphysik und Materialforschung. Annual report 1993

International Nuclear Information System (INIS)

Moeller, W.; Wieser, E.; Kirch, S.

1994-04-01

Highlights were: Ion beam induced epitaxial crystallization of 6H-SiC -Band gap engineering in Co alloyed β-FeSi 2 formed by ion beam synthesis -Formation of CoSi 2 wires by maskless implantation with the focused ion beam -Phosphorus implanted n + -layers for HPGe - Development of a fluidic ISFET microsystem for chemical analysis - Depth selective Moessbauer spectroscopy of Al-implanted iron - Plasma source ion implantation - Simultaneous light element analysis by HIERD for plasma-wall interaction studies in fusion research -Paint layer studies using PIXE on air - Texture investigation on geological three phase samples - status of the Rossendorf 7.25 GHz ECR ion source -Formation of double-height Si(001) steps by sputtering with Xe ions - a computer simulation - Self-organisation during Ostwald ripening in ion beam synthesis of buried compound layers - Modification of metals and other materials - Modification of semiconductors and patterning by focused ion beam -Application of ion beams to sensors - Ion beam analysis, fundamentals of ion-solid-interaction and accelerator technique - Structural research. (orig./HP)

MobileCoDaC – A transportable control, data acquisition and communication infrastructure for Wendelstein 7-X

International Nuclear Information System (INIS)

Hennig, Christine; Bluhm, Torsten; Kühner, Georg; Laqua, Heike; Lewerentz, Marc; Müller, Ina; Pingel, Steffen; Riemann, Heike; Schacht, Jörg; Spring, Anett; Werner, Andreas; Wölk, Andreas

2014-01-01

Highlights: • MobileCoDaC is a transportable CoDaC infrastructure for Wendelstein 7-X. • It allows in situ testing and commissioning of components to be used at W7-X by providing W7-X CoDaC infrastructure. • It has been used successfully for test and commissioning of the HEXOS diagnostic at Forschungszentrum Jülich. - Abstract: MobileCoDaC is a test bed allowing in situ testing and commissioning the control and data acquisition of components to be operated at Wendelstein 7-X. It is a minimized replica of the functionality of the complete W7-X CoDaC infrastructure and can be operated independently. MobileCoDaC contains a set of W7-X CoDaC servers, network infrastructure, and accessories for remote access. All hardware is mounted in a single transportable rack system. Moreover, it provides the software infrastructure and user applications for experiment preparation, experiment operation, trouble shooting and experiment data access. MobileCoDaC has been operated successfully for test and commissioning of the control and data acquisition of the HEXOS (high efficiency extreme ultraviolet overview spectrometer) diagnostic at Forschungszentrum Jülich

Availability measurement of grid services from the perspective of a scientific computing centre

International Nuclear Information System (INIS)

Marten, H; Koenig, T

2011-01-01

The Karlsruhe Institute of Technology (KIT) is the merger of Forschungszentrum Karlsruhe and the Technical University Karlsruhe. The Steinbuch Centre for Computing (SCC) was one of the first new organizational units of KIT, combining the former Institute for Scientific Computing of Forschungszentrum Karlsruhe and the Computing Centre of the University. IT service management according to the worldwide de-facto-standard 'IT Infrastructure Library (ITIL)' was chosen by SCC as a strategic element to support the merging of the two existing computing centres located at a distance of about 10 km. The availability and reliability of IT services directly influence the customer satisfaction as well as the reputation of the service provider, and unscheduled loss of availability due to hardware or software failures may even result in severe consequences like data loss. Fault tolerant and error correcting design features are reducing the risk of IT component failures and help to improve the delivered availability. The ITIL process controlling the respective design is called Availability Management. This paper discusses Availability Management regarding grid services delivered to WLCG and provides a few elementary guidelines for availability measurements and calculations of services consisting of arbitrary numbers of components.

Tightening the Reins. Towards a strengthened international nuclear safeguards system. Final report

International Nuclear Information System (INIS)

Haeckel, E.; Stein, G.

1999-12-01

This book has grown out of a research project dealing with political and technical challenges to international nuclear material and technology controls. The project, which was carried out in the period 1997-1999, was made possible through financial support from the Federal Ministry of Education, Science, Research and Technology and, after reorganization of the German Government following the September 1998 elections, from the Federal Ministry of Economics and Technology. Our research project was a co-operative effort linked to a joint Working Group on Nuclear Nonproliferation, sponsored by the German Society for Foreign Affairs (DGAP, Berlin) in collaboration with the Research Centre Juelich (FZJ, Juelich). The working group, a long-standing institution under the chairmenship of Professors Wolf Haefele and Karl Kaiser, is a unique undertaking for the purpose of continuous information exchange, intellectual debate and political consensus formation on all aspects of German nuclear nonproliferation policy. Members of the group comprise leading experts and decision-makers from government and politics, the natural and social sciences, engineering and nuclear industrial enterprises, as well as mass media and the specialized press. Many among them have shaped and executed the Federal Republic's nuclear policies in a variety of responsible positions. (orig.)

User services in the central library of Juelich Research Center

International Nuclear Information System (INIS)

Lapp, E.

1993-01-01

The central library is a sci/tech special library providing information for the KFA researchers and staff. The library has a large collection of sci/tech materials to meet the information demands of the KFA employees and over 3.000 external users. Among the outside users are students fromthe universities and polytechnics of the region Aachen, Cologne, Duesseldorf, and industry. The library acquires about 8.000 volumes per year and subscribes to 2000 journals. (orig.)

DISMANTLING OF THE FUEL CELL LABORATORY AT RESEARCH CENTRE JUELICH

International Nuclear Information System (INIS)

Stahn, B.; Matela, K.; Bensch, D.; Ambos, Frank

2003-01-01

The fuel cell laboratory was constructed in three phases and taken into operation in the years 1962 to 1966. The last experimental work was carried out in 1996. After all cell internals had been disassembled, the fuel cell laboratory was transferred to shutdown operation in 1997. Three cell complexes, which differed, in particular, by the type of shielding (lead, cast steel, concrete), were available until then for activities at nuclear components. After approval by the regulatory authority, the actual dismantling of the fuel cell laboratory started in March 2000. The BZ I laboratory area consisted of 7 cells with lead shieldings of 100 to 250 mm thickness. This area was dismantled from April to September 2000. Among other things, approx. 30,000 lead bricks with a total weight of approx. 300 Mg were dismantled and disposed of. The BZ III laboratory area essentially consisted of cells with concrete shieldings of 1200 to 1400 mm thickness. The dismantling of this area started in the fir st half of 2001 and was completed in November 2002. Among other things, approx. 900 Mg of concrete was dismantled and disposed of. Since more than 90 % of the dismantled materials was measurable for clearance, various clearance measurement devices were used during dismantling. The BZ II laboratory area essentially consists of cells with cast steel shieldings of 400 to 460 mm thickness. In September 2002 it was decided to continue using this laboratory area for future tasks. The dismantling of the fuel cell laboratory was thus completed. After appropriate refurbishment, the fuel cell laboratory will probably take up operation again in late 2003

Utility and risk of nuclear energy

International Nuclear Information System (INIS)

Barnert, H.; Borsch, P.; Feldmann, A.; Merz, E.; Muench, E.; Oesterwind, D.; Voss, A.; Wolters, J.

1979-09-01

The present report contains lectures of a seminar that was arranged by the programme group nuclear power and environment of the Kernforschungsanlage Juelich . The items were: 1) Do we need nuclear energy. An attempt at a system analytic answer. 2) Energy production by means of nuclear fission. 3) The nuclear power plants. 4) Nuclear energy and radiation hazard. 5) Safety of nuclear power plants. (RW) [de

Socio-politics aspects of the nuclear energy

International Nuclear Information System (INIS)

Rodriguez, F.E.

1988-01-01

This paper analyzes some topics that should be taken into account when a country desires to introduce the nuclear power into its electricity generation energy grid. This makes a description about the estimation of risk perception, giving a proposal for a combined information and educational programme. The present work was based on a survey of a nuclear research team at the Nuclear Center in Juelich, West Germany

(p,3He) reactions on 1p shell nuclei at 41 and 45 MeV

International Nuclear Information System (INIS)

Rapp, V.

1982-01-01

In the present thesis the (p, 3 He) reactions on target nuclei of the 1p shell were studied. The measurements were performed at the isochronous cyclotron of the KFA Juelich. Angular distribution at 41 and 45 MeV to residual nuclear states in 7 Li, 8 Be, 9 Be, 10 B, 11 B, 12 C, 13 C, and 14 N. were evaluated. (orig.) [de

Targets for neutron beam spallation sources

International Nuclear Information System (INIS)

Bauer, G.S.

1980-01-01

The meeting on Targets for Neutron Beam Spallation Sources held at the Institut fuer Festkoerperforschung at KFA Juelich on June 11 and 12, 1979 was planned as an informal get-together for scientists involved in the planning, design and future use of spallation neutron sources in Europe. These proceedings contain the papers contributed to this meeting. For further information see hints under relevant topics. (orig./FKS)

Radiation resistant and decontaminable coatings for shipping, interim storage and repository storage casks containing radioactive wastes

International Nuclear Information System (INIS)

Kunze, S.

1995-02-01

All the Corrobesch-DF-Nukelar coatings - black, yellow, blue, red and white - have been excellently decontaminable without and after radiation exposure with 3x10 5 Gy, despite the slightly higher absorbed dose rate applied at KFA Juelich (DIN 55 991 requires ≤1.0 KGy/h). After a further increase to 3x10 6 Gy in the absorbed dose, with an absorbed dose rate up to 1.0 KGy/h conforming to the standard, the coatings black, yellow, blue were still excellent in their decontamination behavior. After exposure to 10 7 Gy all coatings irradiated at Gammaster in their irradiation room (150 m 3 ) with permanent air changes and at absorbed dose rates of 0.9-1.0 KGy/h have been well decontaminable, and the coatings irradiated at KFA Juelich in the 10 l vessel with discontinuous air changes and variable absorbed dose rate (0.22-2.7 KGy/h) have still been fairly well decontaminable only. To be able to evaluate possible changes occurring upon 10 7 Gy radiation exposure, the test specimens were exposed to the action of chemicals according to DIN 55 991 as well as to decontamination cleansing solutions. Different discolorations, very small reductions in brilliancy, and sometimes minor deteriorations in surface hardness occurred. Detrimental visible changes, e.g. bubble and crack formation, swelling, detachment from the base, etc., have not been found for any of the coatings. These results for the test specimens irradiated at Gammaster are identical with the results for the test specimens irradiated at KFA Juelich, except minor deviations. Contrary to expectations, Corrobesch-DF-Nuklear has proved to be a coating material, which, although it consists of organic base material, nevertheless tolerates radiation exposures without visible damage, i.e. conditions under which only electrodeposited nickel coatings have appeared appropriate until now. This means that application of Corrobesch-Nuklear-DF allows the costs of coating of fuel element shipping and storage casks to be reduced

Kernkraftwerk Obrigheim GmbH. Annual report 1989

International Nuclear Information System (INIS)

Koerner, C.

1990-01-01

The Obrigheim nuclear power station was operated at full load during the year 1989: 7.756 operating hours produced electrical energy of 2.689 GWh. This is the fifth best annual result during Obrigheim's operating period. Since commissioning in October 1968, 154.866 hours of operation have generated 52.125 GWh (gross) and from test operation in March 1969 until the end of 1989, 154.086 hours of operation have generated 52.013 GWh. This is an availability of power of 82.1% in this period and a time availability of 84.4%. In 1988, the plant was shut down for 927 hours for the 20th refueling including testing, inspection and repair work. Apart from refueling, the plant had a good time availability and therefore contributed 5% to the safe, economical and environmentally acceptable electricity supply of the Land Baden-Wuerttemberg. The power station is of great significance to the region, both in terms of power supply and the economy. (orig.) [de

Kernkraftwerk Obrigheim GmbH. Annual report 1990

International Nuclear Information System (INIS)

Koerner, C.

1991-01-01

The Obrigheim nuclear power station was operated at full load from January 1 through May 25, 1990, generating 1.236 GWh of electrical energy in 3.475 operating hours. The Obrigheim nuclear power station thus achieved during this period of 145 days in 1990 an operating availability of 100%. Since its commissioning in October 1968, the Obrigheim reactor station has been operating for 158.341 hours, generating 53.361 GWh (gross), and from test operation started in March 1969 up to the end of 1990, all in all 53.249 GWh have been generated in 157.561 operating hours, which means an availability time ratio of 82.3 %, and a capacity factor of 80.1%. The plant was shut down in 1990 for the 21st refuelling operation including inspection and repair work, for a fictitious period of 942 hours. In addition, power operation was stopped by an order of the supervisory authority for another 4.343 hours, so that the plant remained disconnected from the grid between May 26 and December 31, 1990. In the first part of the year 1990, until May 26, the plant had an excellent availability time ratio and thus contributed about 2.5% of the safe, economic and environmentally sound electricity supplies in Baden-Wuerttemberg. (orig./HP) [de

Fallstudie Brose Fahrzeugtechnik GmbH & Co. KG - Verbesserung des Anfrageprozesses im Einkauf der Brose Fahrzeugtechnik GmbH & Co. KG

OpenAIRE

Senger, Enrico; Österle, Hubert

2003-01-01

Die Brose Fahrzeugtechnik liefert Fensterheber, Türschlösser, Türsysteme und Sitzverstel-lungen an die Automobilindustrie. Sie realisierte einen kooperativen Anfrageprozess mit ihren externen Zulieferern und ihren drei internen in die Beschaffung involvierten Bereiche (Zentraleinkauf, Kundenteameinkäufer und Werkseinkauf). Die Anfragen gehen von den internen Bereichen elektronisch an die potentiellen Lieferanten. Im Gegensatz zu früher besitzen alle internen Bereiche vollständige Transparenz ...

International Conference (4th) on Nanostructured Materials Held in Stockholm, Sweden on 14-19 June 1998. Book of Abstracts

Science.gov (United States)

1998-06-19

de Fisica de Sistemas, Spain Forschungszentrum Karlsruhe, Germany Univ. of Delaware, USA EPFL, Switzerland Tohoku University, Japan Virginia...Dominguez2, E.Roldan2, J.Campora3, P. Palma3 and A. Fernandez! institute de Ciencia de Materiales de Sevilla, Centra de Investigaciones Cintificas...34Isk de la Cartuja", Avda. Americo Vespucio s/n, 41092-Sevilla, SPAIN <asuncion@cica.es: 2Depto. de Qufmica- Fisica , Universidad de Sevilla,

Ein Kredit für Weihnachtsbaumkugeln

Science.gov (United States)

Tutsch, Sina

Eine Mathematikerin aus dem DFG-Forschungszentrum Matheon arbeitet an Methoden zur dreidimensionalen Visualisierung. Sie hat die Geschäftsidee, Weihnachtsbaumkugeln mit bewegten Hologrammen herzustellen, die sich individuell gestalten lassen, und plant eine Existenzgründung. Aus einem öffentlichen Förderprogramm erhält sie ein günstiges Darlehen in Höhe von 50 000 Euro. Für die Startphase ihres Unternehmens benötigt sie jedoch den vierfachen Betrag.

Implementierung einer Visualisierungsanwendung für Apples iOS

OpenAIRE

Felder, Christian

2011-01-01

Am Peter Grünberg Institut sowie am Jülich Centre for Neutron Science (JCNS) des Forschungszentrums Jülich ist schon seit Jahren eine standardisierte Grafikbibliothek im Einsatz, die auf einer Implementierung des grafischen Kernsystems (GKS) basiert. Zahlreiche Anwendungen und Programmschnittstellen aus dem Bereich der Instrumentierungs-, Simulations- und Auswertesoftware wurden auf der Basis dieser Bibliothek entwickelt, die sowohl von höhereren Programmiersprachen als auch gängigen Interpre...

FULLPROF as a new tool for flipping ratio analysis: further improvements

International Nuclear Information System (INIS)

Frontera, C.; Rodriguez-Carvajal, J.

2004-01-01

In the international workshop on polarized neutron for condensed matter investigation (Juelich, September 2002), we presented the implementations done in FULLPROF in order to introduce the ability of performing flipping ratio analysis. During this year we have modified the program in order to extend the initial features. We have tested these new implementations by re-analyzing flipping ratio data on Metrz-Nit (C 10 H 16 N 5 O 2 ) compound

Trigger electronics for the forward and backward hodoscopes of ANKE

International Nuclear Information System (INIS)

Dymov, S.N.; Komarov, V.I.; Kulikov, A.V.; Merzlyakov, S.I.; Petrus, A.Yu.; Zhuravlev, N.I.; Mussgiller, A.

2002-01-01

Trigger electronics of the forward and backward scintillation hodoscopes of ANKE, the magnetic spectrometer placed at the internal beam line of the COSY-Juelich accelerator, is described. The two developed sets of trigger electronic modules are implemented in the whole ANKE trigger system and are used for the running experiments. For selection of double particle events in the hodoscope both the combinatory logic and the charge discrimination are used

Status and perspectives of the dismantling of nuclear power plants in Germany (Dismantling monitoring 2015); Stand und Perspektiven des Rueckbaus von Kernkraftwerken in Deutschland (''Rueckbau-Monitoring 2015'')

Energy Technology Data Exchange (ETDEWEB)

Wealer, Ben; Seidel, Jan Paul [Technische Univ. Berlin (Germany); Gerbaulet, Clemens; Hirschhausen, Christian von [Technische Univ. Berlin (Germany); Deutsches Institut fuer Wirtschaftsforschung, Berlin (Germany)

2015-11-15

The dismantling monitoring 2015 covers the nuclear power plants HDR Grosswelzheim, Niederaichbach (KKN), MZFR Karlsruhe, Lingen (KWL), Gundremmingen unit A (KRB-A), VAK Kahl, Muehlheim-Kaerlich (KMK), THTR-300 Hamm-Uentrop, AVR Juelich, Greifswald (KGR 1-5), KNK II Karlsruhe, Rheinsberg (KKR), Wuergassen (KWW), Stade (KKS), Obrigheim (KWO), SNR 300. The post-operational phase activities of other shut-down nuclear power plants and the active companies are summarized.

A new plant chamber facility PLUS coupled to the atmospheric simulation chamber SAPHIR

Science.gov (United States)

Hohaus, T.; Kuhn, U.; Andres, S.; Kaminski, M.; Rohrer, F.; Tillmann, R.; Wahner, A.; Wegener, R.; Yu, Z.; Kiendler-Scharr, A.

2015-11-01

A new PLant chamber Unit for Simulation (PLUS) for use with the atmosphere simulation chamber SAPHIR (Simulation of Atmospheric PHotochemistry In a large Reaction Chamber) has been build and characterized at the Forschungszentrum Jülich GmbH, Germany. The PLUS chamber is an environmentally controlled flow through plant chamber. Inside PLUS the natural blend of biogenic emissions of trees are mixed with synthetic air and are transferred to the SAPHIR chamber where the atmospheric chemistry and the impact of biogenic volatile organic compounds (BVOC) can be studied in detail. In PLUS all important enviromental parameters (e.g. temperature, PAR, soil RH etc.) are well-controlled. The gas exchange volume of 9.32 m3 which encloses the stem and the leafes of the plants is constructed such that gases are exposed to FEP Teflon film and other Teflon surfaces only to minimize any potential losses of BVOCs in the chamber. Solar radiation is simulated using 15 LED panels which have an emission strength up to 800 μmol m-2 s-1. Results of the initial characterization experiments are presented in detail. Background concentrations, mixing inside the gas exchange volume, and transfer rate of volatile organic compounds (VOC) through PLUS under different humidity conditions are explored. Typical plant characteristics such as light and temperature dependent BVOC emissions are studied using six Quercus Ilex trees and compared to previous studies. Results of an initial ozonolysis experiment of BVOC emissions from Quercus Ilex at typical atmospheric concentrations inside SAPHIR are presented to demonstrate a typical experimental set up and the utility of the newly added plant chamber.

A new plant chamber facility, PLUS, coupled to the atmosphere simulation chamber SAPHIR

Science.gov (United States)

Hohaus, T.; Kuhn, U.; Andres, S.; Kaminski, M.; Rohrer, F.; Tillmann, R.; Wahner, A.; Wegener, R.; Yu, Z.; Kiendler-Scharr, A.

2016-03-01

A new PLant chamber Unit for Simulation (PLUS) for use with the atmosphere simulation chamber SAPHIR (Simulation of Atmospheric PHotochemistry In a large Reaction Chamber) has been built and characterized at the Forschungszentrum Jülich GmbH, Germany. The PLUS chamber is an environmentally controlled flow-through plant chamber. Inside PLUS the natural blend of biogenic emissions of trees is mixed with synthetic air and transferred to the SAPHIR chamber, where the atmospheric chemistry and the impact of biogenic volatile organic compounds (BVOCs) can be studied in detail. In PLUS all important environmental parameters (e.g., temperature, photosynthetically active radiation (PAR), soil relative humidity (RH)) are well controlled. The gas exchange volume of 9.32 m3 which encloses the stem and the leaves of the plants is constructed such that gases are exposed to only fluorinated ethylene propylene (FEP) Teflon film and other Teflon surfaces to minimize any potential losses of BVOCs in the chamber. Solar radiation is simulated using 15 light-emitting diode (LED) panels, which have an emission strength up to 800 µmol m-2 s-1. Results of the initial characterization experiments are presented in detail. Background concentrations, mixing inside the gas exchange volume, and transfer rate of volatile organic compounds (VOCs) through PLUS under different humidity conditions are explored. Typical plant characteristics such as light- and temperature- dependent BVOC emissions are studied using six Quercus ilex trees and compared to previous studies. Results of an initial ozonolysis experiment of BVOC emissions from Quercus ilex at typical atmospheric concentrations inside SAPHIR are presented to demonstrate a typical experimental setup and the utility of the newly added plant chamber.

Analytical support for the preparation of bundle test QUENCH-10 on air ingress

International Nuclear Information System (INIS)

Birchley, J.; Haste, T.; Homann, C.; Hering, W.

2005-07-01

Bundle test QUENCH-10 is dedicated to study air ingress with subsequent water quench during a supposed accident in a spent fuel storage tank. It was proposed by AEKI, Budapest, Hungary and was performed on 21 July 2004 in the QUENCH facility at Forschungszentrum Karlsruhe. Preparation of the test is based on common analytical work at Forschungszentrum Karlsruhe and Paul Scherrer Institut, Villigen, Switzerland, mainly with the severe accident codes SCDAP/RELAP5 and MELCOR, to derive the protocol for the essential test phases, namely pre-oxidation, air ingress and quench phase. For issues that could not be tackled by this computational work, suggestions for the test conduct were made and applied during the test. Improvements of the experimental set-up and the test conduct were suggested and largely applied. In SCDAP/RELAP5, an error was found: for thick oxide scales, the output value of the oxide scale is sensibly underestimated. For the aims of the test preparation, its consequences could be taken into account. Together with the related computational and other analytical support by the engaged institutions the test is co-financed as test QUENCH-L1 by the European Community under the Euratom Fifth Framework Programme on Nuclear Fission Safety 1998 - 2002 (LACOMERA Project, contract No. FIR1-CT2002-40158). (orig.)

Validated design of the ITER main vacuum pumping systems

International Nuclear Information System (INIS)

Day, Chr.; Antipenkov, A.; Dremel, M.; Haas, H.; Hauer, V.; Mack, A.; Boissin, J.-C.; Class, G.; Murdoch, D.K.; Wykes, M.

2005-01-01

Forschungszentrum Karlsruhe is developing the ITER high vacuum cryogenic pumping systems (torus, cryostat, NBI) as well as the corresponding mechanical roughing pump trains. All force-cooled big cryopumps incorporate similar design of charcoal coated cryopanels cooled to 5 K with supercritical helium. A model of the torus exhaust cryopump was comprehensively characterised in the TIMO testbed at Forschungszentrum. This paper discusses the vacuum performance results of the model pump and outlines how these data were incorporated in a sound design of the whole ITER torus exhaust pumping system. To do this, the dedicated software package ITERVAC was developed which is able to describe gas flow in viscous, transitional and molecular flow regimes as needed for the gas coming through the divertor slots and along the pump ducts into the cryopumps. The entrance section between the divertor cassettes and each pumping duct was identified to be the bottleneck of the gas flow. The interrelation of achievable throughputs as a function of the divertor pressure and the cryopump pumping speed is discussed. The system design is completed by assessment of the NBI cryopump system and integrating performance curves for the roughing pump trains needed during the regeneration phases of the cryopumps. (author)

Strategy for decommissioning of NPP's in Germany

International Nuclear Information System (INIS)

Rittscher, D.; Sterner, H.

2003-01-01

According to German Atomic Law, two different strategies are possible, i.e. direct dismantling and safe enclosure before dismantling. Both approaches have their advantages and disadvantages. Taking into account the site and plant specific conditions the optimal strategy can be evaluated. Both approaches have been applied in Germany in the past. The German Atomic Law and the Radiation Protection Ordinance (June 2002) were adapted recently (July 2002). Additionally, the life operation time of the German NPP's was fixed in a new law (April 2002): Orderly Termination of the Commercial Production of Nuclear Electricity. These issues have made it necessary for the power utilities to review the strategies applied. As long as the final disposal in Germany is still an open issue, the construction of local Interim Stores is necessary to be able to dismantle a NPP. The basic strategies are not excluding each other and it seems clear today, that the optimal approach is a combination of these strategies, e.g. dismantling of all auxiliary systems and leaving activated parts for a longer SE period. Within this approach the advantages of both basic strategies have been integrated in one. The EWN GmbH has developed such integrated but still different approaches for the decommissioning projects of the Kernkraftwerke Greifswald (KGR) and the Arbeitsgemeinschaft Versuchsreaktor (AVR) Juelich. It can be stated that the decommissioning of a NPP does not present technical issues of concern, but is more a project management issue, although surrounded by sometime intricate political and juridical boundary conditions. A major strategy change is to be expected only when final disposal capacities are available in the future. (authors)

ENSTAR detector: fabrication and test measurement

International Nuclear Information System (INIS)

Shukla, P.; Jha, V.; Roy, B.J.; Chatterjee, A.; Machner, H.; Biswas, P.K.; Guha, S.; Jawale, S.B.; Panse, H.B.; Balasubramanian, R.

2003-07-01

A large acceptance plastic scintillator detector ENSTAR has been designed and built at BARC, Mumbai. The detector will be used for studies of a new type of nuclear matter- the η-mesic nucleus, at the multi-GeV hadron facility COSY (COoler SYnchrotron), Juelich, Germany. The ENSTAR design has been optimized for detecting decay products of eta-nucleus bound state (η-mesic nucleus), namely protons and pions. However, it can also be used in other experiments whereever missing mass determination in a reaction has to be done in coincidence with decay products. The detector is made of plastic scintillators arranged in three concentric cylindrical layers. These layers will be used to generate ΔE - E spectra for particle identification and total energy information for the stopped particles. Each layer is sub-divided into a number of pieces to obtain θ and φ information. The scintillator read-out is made through state-of-the-art fiber optic technique. The present report describes fabrication details such as machining the scintillators, polishing the scintillators and the fibers and coupling the fibers with scintillators and photomultiplier tubes. Test measurements have been performed with proton beam from the COSY accelerator at Juelich, the results of which are reported. (author)

Experiments on the quench behavior of fuel rods

International Nuclear Information System (INIS)

Hofmann, P.; Noack, V.; Burbach, J.; Metzger, H.

1995-01-01

Because of the importance of the observed reflood phenomena for safety of current and future LWRs, the Forschungszentrum Karlsruhe (FZKA) started a program to investigate the mechanisms of quench-induced oxidation of Zircaloy. A small scale test-rig was designed and built in which it is possible to quench single Zircaloy rods by water and steam. The report describes the status of this work in May 1995. Some experimental results are presented. (orig./HP)

Experiments on the quench behavior of fuel rods

Energy Technology Data Exchange (ETDEWEB)

Hofmann, P.; Noack, V.; Burbach, J.; Metzger, H.

1995-08-01

Because of the importance of the observed reflood phenomena for safety of current and future LWRs, the Forschungszentrum Karlsruhe (FZKA) started a program to investigate the mechanisms of quench-induced oxidation of Zircaloy. A small scale test-rig was designed and built in which it is possible to quench single Zircaloy rods by water and steam. The report describes the status of this work in May 1995. Some experimental results are presented. (orig./HP)

Beryllium irradiation embrittlement test programme. Material and specimen specification, manufacture and qualification

International Nuclear Information System (INIS)

Harries, D.R.; Dalle Donne, M.

1996-06-01

The report presents the specification, manufacture and qualification of the beryllium specimens to be irradiated in the BR2 reactor in Mol to investigate the effect of the neutron irradiation on the embrittlement as a function of temperature and beryllium oxide content. This work was been performed in the framework of the Nuclear Fusion Project of the Forschungszentrum Karlsruhe and is supported by the European Union within the European Fusion Technology Program. (orig.)

Ion diode diagnostics to resolve beam quality issues

Energy Technology Data Exchange (ETDEWEB)

Bluhm, H; Buth, L; Hoppe, P [Forschungszentrum Karlsruhe (Germany). Institut fuer Neutronenphysik und Reaktortechnik; and others

1997-12-31

Various diagnostic methods and instruments are under development at the Forschungszentrum Karlsruhe to measure important physical quantities in the accelerating gap of high power diodes on KALIF with a high spatial and temporal resolution. The methods include optical spectroscopy, refractive index measurements, dispersion interferometry, and high resolution energy analysis. The setup of these diagnostic tools and the first results obtained for applied and self-magnetically insulated diodes are presented. (author). 6 figs., 5 refs.

500 MHz narrowband beam position monitor electronics for electron synchrotrons

Science.gov (United States)

Mohos, I.; Dietrich, J.

1998-12-01

Narrowband beam position monitor electronics were developed in the Forschungszentrum Jülich-IKP for the orbit measurement equipment used at ELSA Bonn. The equipment uses 32 monitor chambers, each with four capacitive button electrodes. The monitor electronics, consisting of an rf signal processing module (BPM-RF) and a data acquisition and control module (BPM-DAQ), sequentially process and measure the monitor signals and deliver calculated horizontal and vertical beam position data via a serial network.

Quality control procedures on graphite, pyrocarbon and silconcarbide

Energy Technology Data Exchange (ETDEWEB)

Koizlik, K. [comp.

1974-09-01

The presented report includes those papers presented at the 8th meeting of the DP-QCWP in Winfrith which have been written by collaborators of the Institut fuer Reaktorwerkstoffe der Kernforschungsanlage Juelich, together with other co-authors. The papers deal with problems of standardizing characterization methods for the routine quality control of graphites and pyrolytic carbons as well as with more basic procedures (transmission electron microscopy, microporosity) for the analysis of pyrocarbon structure.

Feasibility of deuteron break-up study at COSY 0 deg facility (ANKE)

International Nuclear Information System (INIS)

Kacharava, A.K.; Komarov, V.I.; Kulikov, A.V.; Macharashvili, G.G.; Petrus, A.Yu.

1996-01-01

The experimental setup ANKE (Apparatus for study of Nuclear and Kaonic Ejectiles) under construction at the Cooling Synchrotron (COSY, Juelich) is aimed to study a wide class of proton-nucleus reactions. The kinematic conditions, detection efficiencies and useful event selection criteria for the deuteron break-up study at the COSY internal proton beam are considered in this paper. The expected counting rates for the detector systems are also estimated. 16 refs., 11 figs., 3 tabs

Forschungszentrum Rossendorf, Institute of Nuclear and Hadronic Physics. Annual report 1993

International Nuclear Information System (INIS)

Doenau, F.; Prade, H.

1994-03-01

The theoretical investigations performed in 1993 dealt with the study of nuclear and subnuclear degrees of freedom, high-spin phenomena and the dynamics of open quantum systems. The results of the research and developments are presented in numerous publications, conference contributions and talks. Experimental data are obtained from in-beam spectroscopic studies, medium energy physics and heavy ion physics. The participation in national or international research projects has been continued. (orig.)

Forschungszentrum Rossendorf, Institute of Bioinorganic and Radiopharmaceutical Chemistry. Annual report 1995

International Nuclear Information System (INIS)

Johannsen, B.

1996-02-01

Research at the Institute of Bioinorganic and Radiopharmaceutical Chemistry of the Research Center Rossendorf is focused on radiotracers as molecular probes for diagnosis of disease. The research effort has two main components: -Positron emission tomography (PET) - technetium chemistry and radiopharmacology. The research activities of the Institute have been performed in three administratively classified groups. A PET tracer group is engaged in the chemistry and radiopharmacy of 11 C and 18 F compounds and in the setup of the PET center. A SPECT tracer group deals with the design, synthesis and chemical characterization of metal coordination compounds, primarily rhenium and technetium complexes. A biochemical group is working on SPECT and PET-relevant biochemical and biological projects. This includes the characterization and assessment of new compounds developed in the two synthetically oriented groups. The annual report presented here covers the research activities of the Institute of Bioinorganic and Radiopharmaceutical Chemistry in 1995. (orig.)

Neutron activation analysis with pulsed 14 MeV neutrons for the characterization of heterogeneous radioactive wastes; Neutronenaktivierungsanalyse mit gepulsten 14 MeV Neutronen zur Charakterisierung heterogener radioaktiver Abfaelle

Energy Technology Data Exchange (ETDEWEB)

Mildenberger, Frank

2017-07-01

For the transport, interim storage and disposal of radioactive waste, it is assumed to have knowledge of the radioactive and non-radioactive inventory. In order to determine the radioactive inventory destructive (e.g. α-, β-, γ-measurements according to wet chemical sample preparation) and non-destructive (e.g. γ-scanning and neutron measurements) measurement methods are used. For the characterization of non-radioactive substances a prototype for the assay of small-volume (50 L) samples was constructed and parameterized using the neutron activation analysis (NAA) with a pulsed 14 MeV neutron source. Subsequently, the non-destructive analytical method called MEDINA (Multi Element Detection Based on Instrumental Neutron Activation) for 200 l waste drums was developed in a cooperation between RWTH Aachen University and Forschungszentrum Juelich GmbH. The aim of this thesis is to investigate and characterize heterogeneous mixed samples regarding their material composition as well as their inhomogeneous distribution. For this purposes, studies were carried out on 200 l steel drums with heterogeneous matrices using the NAA in the MEDINA facility. The samples are composed out of a mixture of concrete and polyethylene (PE) bodies. Due to its high hydrogen content, the PE can have a strong influence on the neutron moderation and neutron absorption and can thereby occur as a possible disturbance variable in the characterization of the non-radioactive inventory. For these studies a pulsed 14 MeV neutron source is used to record the prompt and delayed γ-rays between the neutron pulses, separately. Thus, the performance of the MEDINA method relating to strongly moderating mixed matrices and their characterization is studied. In order to optimize the measurement of delayed γ-rays without any appreciable interference of prompt γ-rays, the decay of thermal neutrons was studied and the thermal neutron die-away time was determined. It ranges between 2 and 5 ms according to

Hydrochemical and geochemical processes in superficial dump sediments in Zwenkau open brown coal mine; Hydro- und geochemische Prozesse in oberflaechennahen Kippensedimenten des Braunkohlentagebaus Zwenkau

Energy Technology Data Exchange (ETDEWEB)

Wiegand, U.

2002-07-01

The present study was performed as part of a project titled ''Ground and air-based spectrometric studies for the differentiation of reactively altered brown coal open mining areas in Central Germany'' (Project 02 WB 9667/5) which was funded by the Federal Ministry for Education and Research. It was carried out as a cooperation between GeoForschungszentrum Potsdam (GFZ, Potsdam GeoResearch Centre), Deutsches Zentrum for Lust- und Raumfahrt (DLR, German Aerospace Centre), Gesellschaft fuer Angewandte Fernerkundung (GAF, Society for Applied Remote Sensing) and Umweltforschungszentrum Leipzig/Halle GmbH (UFZ, Leipzig/Halle Environmental Research Centre). The idea of the project was to calibrate aerial data obtained by means of spectrometric remote sensing methods using conventional petrographic, mineralogical and geochemical analysis. This would provide the mining industry with a powerful method with low time and staff requirement for reliably classifying the vast dump areas produced by open pit mining, accurately assigning findings to location data and thus identifying suitable uses for different sites. The focus of the present study was on characterising hydrochemical and geochemical alterations in dump sediments of the Zwenkau brown coal open mining area south of Leipzig in Central Germany. The collection of these data plays a decisive role in plans for cultivating and assessing the potential hazard to the open mining landscape. [German] Die vorliegende Arbeit wurde im Rahmen des BMBF-gefoerderten Projektes 'Luft- und bodengestuetzte spektrometrische Untersuchungen zur Differenzierung reaktiv veraenderter Braunkohlentagebaugebiete in Mitteldeutschland' (Vorhaben 02 WB 9667/5) als Kooperation zwischen dem GeoForschungsZentrum Potsdam (GFZ), dem Deutschen Zentrum fuer Luft- und Raumfahrt (DLR), der Gesellschaft fuer Angewandte Fernerkundung (GAF) und dem Umweltforschungszentrum Leipzig/Halle GmbH (UFZ) angefertigt. Idee des Projektes war

Energy and economic optimization of a membrane-based oxyfuel steam power plant; Energetische und wirtschaftliche Optimierung eines membranbasierten Oxyfuel-Dampfkraftwerkes

Energy Technology Data Exchange (ETDEWEB)

Nazarko, Yevgeniy

2015-07-01

Carbon capture and storage is one technological option for reducing CO{sub 2} emissions. The oxyfuel process is based on the combustion of fossil fuels in an oxygen-flue gas atmosphere with the subsequent concentration of CO{sub 2}. The oxygen is produced by cryogenic air separation with an energy demand of 245 kWh{sub el}/t{sub O2}. The application of ceramic membranes has the potential to reduce the specific energy demand of oxygen supply with consistently high-purity oxygen. This work focuses on - determining the efficiency of an advanced oxyfuel steam power plant that can be constructed today using membranes for oxygen production, - investigating and quantifying the potential for energy optimizing the overall process by changing its flow structure, - assessing the feasibility of individual optimization options based on their investment costs under market conditions. For this work, a method developed by Forschungszentrum Juelich and patented on 25 April 2012 under EP 2214806 is used. The Oxy-Vac-Juel concept is integrated into the oxyfuel steam power plant with simple process management using standardized power plant components. The net efficiency of the base power plant is 36.6 percentage points for an oxygen separation degree of 60 %. This corresponds to a net power loss of 9.3 percentage points compared to the reference power plant without CO{sub 2} capture. The specific electricity demand of this oxygen supply method is 176 kWh{sub el}/t{sub O2}. To increase the efficiency, the flow structure of the base power plant is optimized using industrially available components from power plant and process engineering. The 22 analyzed optimization options consist of design optimization of the gas separation process, the modification of the flue gas recirculation and the plant-internal waste heat utilization. The energetic advantage over the base power plant, depending on the optimization option, ranges from 0.05 - 1.00 percentage points. For each optimization option

Feasibility of maintaining in-plane polarization for a storage ring EDM search

Science.gov (United States)

Stephenson, Edward; Storage Ring EDM Collaboration

2014-09-01

cooling reduces the depolarization from finite emittance and second-order momentum spread acting through synchrotron oscillations. Further lifetime improvement to the level of hundreds of seconds is achieved by adjusting sextupole fields located in the COSY ring arcs at places of large transverse beta functions and dispersion. The dependence of the reciprocal of the lifetime on sextupole field strength is nearly linear, permitting an easy location of the best field values. These typically occur near loci of zero chromaticity. Supported in part by the Forschungszentrum-Juelich and the European Union.

Conceptual Design for a Bulk Tungsten Divertor Tile in JET

International Nuclear Information System (INIS)

Mertens, P.; Neubauer, O.; Philipps, V.; Schweer, B.; Samm, U.; Hirai, T.; Sadakov, S.

2006-01-01

With ITER on the verge of being build, the ITER-like Wall project (ILW) for JET aims at providing the plasma chamber of the tokamak with an environment of mixed materials which will be relevant to the support of decisions to the first wall construction and, from the point of view of plasma physics, to the corresponding investigations of possible plasma configuration and plasma-wall interaction. In both respects, tungsten plays a key role in the divertor cladding whereas beryllium will be used for the vessel's first wall. For the central tile, also called LB-SRP for '' Load-Bearing Septum Replacement Plate '', resort to bulk tungsten is envisaged in order to cope with the high loads expected (up to 10 MW/m 2 for about 10 s). This is indeed the preferred plasma-facing component for positioning the outer strike-point in the divertor. Forschungszentrum Juelich has developed a conceptual design for this tile, based on an assembly of tungsten blades or lamellae. It was selected in the frame of an extensive R-and-D study in search of a suitable, inertially cooled component(T. Hirai et al., R-and-D on full tungsten divertor and beryllium wall for JET ITER-like Wall Project: this conference). As reported elsewhere, the design is actually driven by electromagnetic considerations in the first place(S. Sadakov et al., Detailed electromagnetic analysis for optimisation of a tungsten divertor plate for JET: this conference). The lamellae are grouped in four stacks per tile which are independently attached to an equally re-designed supporting structure. A so-called adapter plate, also a new design, takes care of an appropriate interface to the base carrier of JET, onto which modules of two tiles are positioned and screwed by remote handling (RH) procedures. The compatibility of the design on the whole with RH requirements is another essential ingredient which was duly taken into account throughout. The concept and the underlying philosophy will be presented along with important

Omega meson production in proton-proton collisions

International Nuclear Information System (INIS)

Schulte-Wissermann, M.; Brinkmann, K.; Dshemuchadse, S.

2005-01-01

The TOF spectrometer is an external experiment fed by the proton accelerator COSY, which is located at the Forschungszentrum Juelich, Germany. While this detector does not utilize a magnetic field for particle identification, it, however, stands out for its high acceptance (approx. 2π in the laboratory frame) and versatility. TOF measures the velocity-vectors of all charged particles, which then are used to completely reconstruct the event pattern. Due to the modular design of the TOF detector, its components can be assembled to ideally match different experimental requirements. This makes it a multipurpose device, which has shown results for many hadronic channels, starting from the pion threshold up to excess energies as high as 1GeV. One of the experimental programs is dedicated to the ω meson production. In proton-proton interactions, this channel has remained largely unstudied until the late 1990s. Then, first experimental data in the direct vicinity of the threshold and at an excess energy of ε=320 MeV became available. We have published data on ω production for two (intermediate) excess energies of ε=93 MeV and ε=173 MeV. In parallel, a considerable interest on the part of theory arose, since the reaction dynamics of ω-meson production in nucleon-nucleon collisions has an impact on many fields of modern physics. For example, there is an ongoing discussion whether 'missing resonances' may (help to) explain the phenomena observed in dense matter. These resonances would couple to the pω, but not to the pπ channel. Although predicted by many authors, until now no pω resonance was found experimentally; the strangeness content of the nucleon is still an open question. One possible key to an answer is the ratio of the total cross sections of ω to φ - mesons, which experimentally is about a factor of seven larger than simple SU predictions (often referred to as 'violation of the OZI-rule'). However, this comparison is only valid assuming similar

Investigation of properties of (U)HMW-PE under the influence of gamma irradiation

Energy Technology Data Exchange (ETDEWEB)

Ehe, K. von der; Wolff, D.; Boehning, M. [BAM Federal Institute for Materials Research and Testing, Berlin (Germany)

2012-11-01

(U)HMW-PE as implant or neutron shielding material, respectively, it is necessary to understand the influence of gamma irradiation on the material properties. For this purpose samples were investigated, which were either gamma irradiated at the Helmholtz-Zentrum Berlin (HZB) with doses up to 10 kGy or at the Forschungszentrum Juelich (FZJ) with a much higher dose corresponding to characteristics for radioactive waste storage (e.g. 600 kGy). Afterwards a comparison was made with the untreated material. All obtained samples were analyzed with a broad variety of methods. Besides thermo analytical and thermo mechanical methods like Differential Scanning Calorimetry (DSC) and Dynamic Mechanical Analysis (DMA), methods for structure determination like IR-spectroscopy and the determination of the insoluble content were performed. Some results were already shown at the Annual Meeting on Nuclear Technology 2011. (orig.)

ROBL - a CRG beamline for radiochemistry and materials research at the ESRF

International Nuclear Information System (INIS)

Matz, W.; Schell, N.; Bernhard, G.; Claussner, J.; Oehme, W.; Prokert, F.; Reich, T.; Schlenk, R.; Proehl, D.; Funke, H.; Eichhorn, F.; Betzl, M.; Dienel, S.; Brendler, V.; Denecke, M.A.; Krug, H.; Neumann, W.; Huettig, G.; Reichel, P.; Strauch, U.

1999-04-01

The paper describes the Rossendorf Beamline (ROBL) built by the Forschungszentrum Rossendorf at th ESRF. ROBL comprises two different and independently operating experimental stations: a radiochemistry laboratory for X-ray absorption spectroscopy of non-sealed radioactive samples and a general purpose materials research station for X-ray diffraction and reflectometry mainly of thin films and interfaces modified by ion beam techniques. The radiochemistry set-up is worldwide a unique installation at a modern synchrotron radiation source. (orig.) [de

Pathfinder irradiation of advanced fuel (Th/U mixed oxide) in a power reactor

International Nuclear Information System (INIS)

Brant Pinheiro, R.

1993-01-01

Within the joint Brazilian-German cooperative R and D Program on Thorium Utilization in Pressurized Water Reactors carried out from 1979 to 1988 by Nuclebras/CDTN, KFA-Juelich, Siemens/KWU and NUKEM, a pathfinder irradiation of Th/U mixed oxide fuel in the Angra 1 nuclear power reactor was planned. The objectives of this irradiation testing, the irradiation strategy, the work performed and the status achieved at the end of the joint Program are presented. (author)

Time-of-flight and vector polarization analysis for diffuse neutron scattering

International Nuclear Information System (INIS)

Schweika, W.

2003-01-01

The potential of pulsed neutron sources for diffuse scattering including time-of-flight (TOF) and polarization analysis is discussed in comparison to the capabilities of the present instrument diffuse neutron scattering at the research center Juelich. We present first results of a new method for full polarization analysis using precessing neutron polarization. A proposal is made for a new type of instrument at pulsed sources, which allows for vector polarization analysis in TOF instruments with multi-detectors

Hydrogen-metal systems

International Nuclear Information System (INIS)

Wenzl, H.; Springer, T.

1976-01-01

A survey is given on the alloys of metal crystals with hydrogen. The system niobium-hydrogen and its properties are especially dealt with: diffusion and heat of solution of hydrogen in the host crystal, phase diagram, coherent and incoherent phase separation, application of metal-hydrogen systems in technology. Furthermore, examples from research work in IFF (Institut fuer Festkoerperforschung) of the Nuclear Research Plant, Juelich, in the field of metal-H systems are given in summary form. (GSC) [de

Large-scale research in the Federal Republic of Germany. Pt. 4

International Nuclear Information System (INIS)

Mock, W.

1986-01-01

The name is misleading: in the biggest of 13 large-scale research institutions, the KFA Nuclear Research Centre Juelich, nuclear research is now only one sphere of activities among many, besides other areas of research such as computer science, materials, and environmental research. This change in the areas of main emphasis constitutes the successful attempt - or so it seems up to now - of a 'research dinosaur' to answer to the necessities of an altered 'research landscape'. (orig.) [de

Cost accounting at the Kernforschungszentrum Karlsruhe GmbH

International Nuclear Information System (INIS)

Neck, E.

1979-01-01

A presentation of the Nuclear Research Center Karlsruhe and its main research activities is given. Company structure, planning and control system in the R and D field are explained. The cost accounting system of the Nuclear Research Center Karlsruhe is discussed in detail, a survey of cost accounting as practiced by other German research establishments and comments on cost accounting as a tool of performance gauging are given. (A.N.)

Gemeinschaftskernkraftwerk Grohnde GmbH (KWG). Annual report 2001

International Nuclear Information System (INIS)

Dittrich, H.

2002-01-01

Apart from the inspection outage and the 16th off-load refueling, operation of the reactor station in 2001 (mostly rated power operation according to the load dispatching center schedule) was uninterrupted and normal to a very large extent. The total gross electricity output in 2001 was 11.559.939 MWh, and net input to the public grid was 10.926.649 MWh. The station's power demand for operation was determined to be 5.5%. The averaged net efficiency was 34.4%. The following performance results are given for the operating year of 2001: Availability time ratio, 94.9%; availability factor (net), 92.2%; availability factor (VGB) 94,7%; load factor, 91.7%. The aggregate gross electricity output since start-up on 31 August 1984 (first criticality) amounts to 191.656.081 MWh, and the aggregate net output to 181.391.892 MWh. Radioactivity discharges by gaseous or liquid effluents were low in the reporting year, just like in the year before, remaining clearly below the licensed discharge values. The records of gaseous radioactive effluents show: rare gases, 1.60 E+11 Bq; aerosols, ≤ EG; iodine, 5,00 E+04 Bq. Radioactivity discharges with liquid effluents in the reporting year were measured to be 9.09 E+06 Bq (exclusive of tritium), and 1.39 E+13 Bq for tritium. The collective dose (direct read-out dosemeters) amounted to 56.62 mSv for the employed plant personnel, and 465.427 mSv for external personnel. (orig./CB) [de

Gemeinschaftskernkraftwerk Grohnde GmbH (KWG). Annual report 2002

International Nuclear Information System (INIS)

Dittrich, H.

2003-01-01

The annual report of the Gemeinschaftskernkraftwerk Grohnde contains the following 6 sections: a summary of the operating schedule, a more detailed part for the description of the power plant operation; an engineering section, a section electric engineering, a section for radiation protection and a section for educational topics. (SR) [de

Kernkraftwerk Obrigheim (KWO) GmbH. Annual report 1991

International Nuclear Information System (INIS)

Koerner, C.

1992-01-01

The Obrigheim nuclear power station was operated at full load from August 21 through Dec. 31, 1991, generating 1.108 GWh of electrical energy in 3.186 operating hours. The Obrigheim nuclear power station thus achieved during this period of 133 days in 1991 an operating availability of 100%. Since its commissioning in October 1968, the Obrigheim reactor station has been operating for 161.527 hours, generating 54.409 GWh (gross), and from test operation started in March 1969 up to the end of 1991, all in all 54.284 GWh have been generated in 160.747 operating hours, which means an availability time ratio of 78.2%, and a capacity factor of 80.4%. The plant was shut down in 1991 for the 21st refuelling operation including inspection and repair work, for a fictitious period of 1783 hours. In addition, power operation was stopped by an order of the supervisory authority for another 3.791 hours, so that the plant remained disconnected from the grid between Januar 1 and August 8, 1991. In the last part of the year 1991, until May 26, the plant had an excellent availability time ratio and thus contributed about 2.5% of the safe, economic and environmentally sound electricity supplies in Baden-Wuerttemberg. (orig.) [de

HO2 measurements at atmospheric concentrations using a chemical ionization mass spectrometry

Science.gov (United States)

Albrecht, S.; Novelli, A.; Hofzumahaus, A.; Kang, S.; Baker, Y.; Mentel, T. F.; Fuchs, H.

2017-12-01

Correct and precise measurements of atmospheric radical species are necessary for a better understanding of the oxidative capacity of the atmosphere. Due to the reactivity of radicals, and their consequent low concentrations, direct measurements of these species are particularly challenging and have been proven in the past to be affected by interfering species. Here we present a chemical ionization source coupled to an APi-HR-TOF-MS (Aerodyne Research Inc.), which has a limit of detection for HO2 radicals well below its atmospheric concentrations ( 1 x 108 molecules cm-3). The instrument was calibrated with a well-established and characterized HO2 calibration source in use for the laser induced fluorescence instrument in the Forschungszentrum Jülich. Within the source, a well characterized amount of HO2 radicals is produced after photolysis of water by a mercury lamp. In addition, several experiments were performed in the atmosphere simulation chamber SAPHIR at the Forschungszentrum Jülich to test for potential interferences. Measurements of HO2 radicals were concurrently detected by a laser induced fluorescence instrument allowing for the comparison of measurements within the two different and independent techniques for various atmospheric conditions regarding concentrations of O3, NOx and VOCs. Results from the intercomparison together with the calibration procedure of the instrument and laboratory characterization will be presented.

Institute of Bioinorganic and Radiopharmaceutical Chemistry. Annual report 2001

International Nuclear Information System (INIS)

Johannsen, B.; Seifert, S.

2002-01-01

In 2001 the Forschungszentrum Rossendorf e.V. continued and further developed its basic and application-oriented research. Research at the Institute of Bioinorganic and Radiopharmaceutical Chemistry, one of five institutes in the Research Centre, was focused on radiotracers as molecular probes to make the human body biochemically transparent with regard to individual molecular reactions. As illustrated by the large number of contributions in this report, the Institute is predominantly engaged in the coordination chemistry and radiopharmacology of technetium and rhenium. (orig.)

The nuclear waste disaster. A view behind the curtain of the presumably clean nuclear power; Das Atommuell-Desaster. Blicke hinter die Kulissen der angeblich sauberen Atomenergie

Energy Technology Data Exchange (ETDEWEB)

Schumacher, Julia; Simon, Armin; Stay, Jochen (comps.)

2015-04-15

The brochure on the nuclear waste disaster - a view behind the curtain of the presumably clean nuclear power discusses the following topics: Thuringia and Saxony - radiating landscapes, Gronau - 100.000 tons for eternity, Gundremmingen - nuclear waste records and castor shortage, Brunsbuettel - castor storage facility without licensing, Juelich the pebble bed drama, Karlsruhe - the hall is filled, Obrigheim - radioactive waste for cooking pots, Asse - the ticking bomb, final repositories - an illusion without solution, stop the waste production, Germany - endless nuclear waste.

Kernenergie aus der Sicht von Jugendlichen

OpenAIRE

Peters, H. P.

1985-01-01

To analyze the cognitions of students regarding the energy topic a content analysis of 57 essays about problems of energy supply, written by German High School students, was conducted. The material used for the content analysis was gathered by an essay competition announced by the Nuclear Research Center in Juelich.Since the participation was voluntary, our sample does not represent a true cross-section of all students. Rather it is biased in several ways. Students who are in favour of nuclea...

The high-temperature reactor's attractiveness lies in passive safety

International Nuclear Information System (INIS)

Anon.

1987-01-01

In the recent years the use of nuclear energy has turned from a technical and scientific issue to a political one. The high-temperature reactor (HTR) however, has always been advertised as particularly safe. The present situation and future developments of HTR-technology were the two issues that VDI-News brought up on the 27th October on an HTR-conference in an interview with the 'spiritual father' of the HTR, Prof. Dr. Rudolf Schulten of the Juelich Nuclear Research Centre. (orig.) [de

Scientific report. Plasma-wall interaction studies related to fusion reactor materials

International Nuclear Information System (INIS)

Temmerman, G. De

2006-01-01

This scientific report summarises research done on erosion and deposition mechanisms affecting the optical reflectivity of potential materials for use in the mirrors used in fusion reactors. Work done in Juelich, Germany, at the Federal Institute of Technology in Lausanne, Switzerland, the JET laboratory in England and in Basle is discussed. Various tests made with the mirrors are described. Results obtained are presented in graphical and tabular form and commented on. The influence of various material choices on erosion and deposition mechanisms is discussed

The conversion of the DIDO-type reactor FRJ-2. Studies and conclusions

International Nuclear Information System (INIS)

Stroemich, A.; Siebertz, Ch.; Wickert, M.

1985-01-01

For the FRJ-2 (23 MW) of the KFA-Juelich the conversion from HEU- to LEU-fuel was investigated. Before starting the conversion calculations our methods were qualified for the application to heavy water moderated research reactors. A combination of LEU-elements with two different U-235 loadings of 180 g and 225 g was found as suitable for conversion. With these LEU-elements a working core and a transition phase was calculated. The change of the mechanical fuel element design was taken into account. (author)

Combined conditioning in the high-temperature experimental nuclear reactor (AVR) at Juelich

International Nuclear Information System (INIS)

Nieder, R.; Vey, K.; Ivens, G.

1984-01-01

The high temperature experimental nuclear reactor (AVR) is the first nuclear power plant in which combined cycle operation has been introduced. The water-steam cycle has been operated for about 15 years according to the alkali method of working with ammonia and hydrazine. The VGB-guidelines have been adhered to througout. Since January 1983 cobined cycle operation has been employed, and in this process a pH-value of about 8.5 and an oxygen concentration of about 200 μg/kg in the feedwater have been used. A distinct reduction of tritium concentration in the water-steam cycle was the outstanding new result. (orig.) [de

Irradiation of pressurized water reactor fuel rods in the Forschungsreaktor Juelich 2

International Nuclear Information System (INIS)

Gaertner, M.

1978-10-01

Test fuel rods have been irradiated in FRJ-2 to study the interaction between fuel and cladding as well as hydride orientation stability in the prehydrided cladding. The fuel rods achieved burn-ups of 3.500 to 10.000 MWd/tU at surface temperatures of 333 0 C and power levels up to 620 W/cm. (orig.) [de

The general concept for a spallation neutron source in the Federal Republic of Germany

International Nuclear Information System (INIS)

Bauer, G.S.

1982-01-01

In a collaborative effort between the two German nuclear research centres at Karlsruhe and at Juelich, a reference concept for a spallation neutron source has been studied which would be suitable to satisfy the medium term needs in neutrons for fundamental research and to serve a large number of other scientific disciplines as well. The reference facility, consisting of a high power proton linac for 5 mA time average current of 1.1 GeV protons and a rotating lead target with hybrid H 2 O-D 2 O moderators can deliver a thermal neutron flux equivalent to 7 x 10 14 cm -2 s -1 at the beam tube noses. Pulsed operation of the accelerator results in an intensity modulation of this flux at a repitition rate of 100 Hz with a peak flux of 1.3 x 10 16 cm -2 s -1 and a pulse width of 510 μs. Further possible improvements were considered, consisting in the use of uranium as target material and in the addition of a proton pulse compressor to increase the neutron peak flux especially in the epithermal energy range and to provide a time structure suitable for neutrino and muon research. To realize this concept in a fashion compatible with existing constraints while still serving a maximum number of users at the earliest possible date, a staged concept is being considered by KFA Juelich. (orig.) [de

Demolition to Green-Field conditions of the FRJ-1 (MERLIN) research reactor. Successes and hurdles in the demolition of a research reactor of the megawatt class; Der Rueckbau des Forschungsreaktors FRJ-1 (MERLIN) bis zur 'Gruenen Wiese'. Erfolge und Huerden beim Rueckbau eines Forschungsreaktors der Megawatt-Klasse

Energy Technology Data Exchange (ETDEWEB)

Stahn, Burkhard; Printz, Rudolf; Matela, Karel; Zehbe, Carsten; Stauch, Bernhard; Zander, Iven [Forschungszentrum Juelich GmbH, Juelich (Germany)

2010-02-15

The Juelich-1 Research Reactor (FRJ-1), also referred to as MERLIN (Medium Energy Research Light Water Moderated Industrial Nuclear Reactor), was a light-water moderated and cooled swimming pool reactor of British design. The cornerstone in the erection of the reactor building was laid on June 11, 1958. Reactor operation was started on February 23, 1962. The plant was last run at a thermal power of 10 MW and shut down for good in 1985 after 23 years of operation. After the fuel elements had been removed and most of the experimental installations dismantled, some first steps towards demolition were taken in 1995. Demolition on a large scale began in 1996. September 8, 2008 was a special day: On the area of the former reactor hall, an oak tree was planted as a symbol of the 'green field' and of the original oak wood which had to make way for the construction of reactors in Juelich. An oak tree now stands in the place of the reactor unit. Was that all? It was not, for there were ancillary systems, operations, utility and hygiene buildings which had to be pulled down. Decontamination and clearance measurements were completed. The application for clearance was prepared and completed. Conventional demolition was started in 2009. After completion of that step, the last chapter about demolition of the FRJ-1 research reactor has been written, and the book can be closed. (orig.)

IAEA consultants' meeting on benchmark validation of FENDL-1. Summary report

International Nuclear Information System (INIS)

Pashchenko, A.B.

1996-01-01

The present report contains the Summary of the IAEA Consultants' Meeting on ''Benchmark Validation of FENDL-1'', held at Karlsruhe, Germany, from 17 to 19 October 1995. This meeting was organized by the IAEA Nuclear Data Section (NDS) with the co-operation and assistance of local organizers of the Forschungszentrum Karlsruhe, Germany. Summarized are the conclusions and the main results of extensive benchmarking of FENDL-1 by comparing experimental data from numerous number of fusion integral experiments, to analytical predictions based on discrete ordinates as well as Monte Carlo calculations. (author). 4 refs

Applications of moisture monitoring using TAUPE-sensors

International Nuclear Information System (INIS)

Koeniger, F.

2007-01-01

TAUPE as a moisture sensor has been developed in cooperation with Technology Transfer Division in Forschungszentrum Karlsruhe since 1996. These sensors can be used to monitor moisture in a variety of materials, using time domain or frequency domain techniques. Major applications are large area supervision of landfill sealings, determination of the snow water equivalent, e.g. in the project SNOWPOWER for the forecasting of the amount of water for energy production in storage lakes and, as a new project, continuous monitoring of groundwater level in the flood plane of river Rhine. (orig.)

Closed-orbit correction using the new beam position monitor electronic of Elsa Bonn

CERN Document Server

Dietrich, J; Keil, J

2000-01-01

RF and digital electronics, developed at the Forschungszentrum Jülich/IKP were integrated to form the new beam position monitor (BPM) system at the Electron Stretcher Accelerator (ELSA) of the University of Bonn. With this system the preservation of the polarization level during acceleration was currently improved by a good correction of the closed-orbit. All BPM offsets relative to the magnetic quadrupole centers were determined by the method of beam-based alignment. The optics functions measured by the BPM system are in good agreement with theoretical predictions.

Decommissioning of the reactor tank and the activated structures within the containment of the sodium cooled nuclear reactor facility (KNK) regulated by the permission step 9; Kompakte Natriumgekuehlte Kernreaktoranlage (KNK). Beseitigung des Reaktortanks und der aktivierten Strukturen im Sicherheitsbehaelter der KNK im Zuge der 9. Stilllegungsgenehmigung

Energy Technology Data Exchange (ETDEWEB)

Zuefle, E.M. [Westinghouse Electric Germany GmbH (Germany)

2006-07-01

Westinghouse was assigned with the decommissioning of the KNK plant by th Forschungszentrum Karlsruhe. One very substantial subject such as the decommissioning of the reactor vessel, is currently performed under specific boundary conditions as residual sodium in the vessel on nitrogen environment. An enclosure in hot-cell technology with wall thickness of 350 mm and total weight of around 500 Mg has been erected above the reactor vessel. All operations are done remote controlled. The paper describes the main boundary conditions, weights and dose rates, cutting technology and installed infrastructure. (orig.)

Computational methods, tools and data for nuclear analyses of fusion technology systems

International Nuclear Information System (INIS)

Fischer, U.

2006-01-01

An overview is presented of the Research and Development work conducted at Forschungszentrum Karlsruhe in co-operation with other associations in the framework of the European Fusion Technology Programme on the development and qualification of computational tools and data for nuclear analyses of Fusion Technology systems. The focus is on the development of advanced methods and tools based on the Monte Carlo technique for particle transport simulations, and the evaluation and qualification of dedicated nuclear data to satisfy the needs of the ITER and the IFMIF projects. (author)

Response of multi-strip multi-gap resistive plate chamber using pulsed electron beam

International Nuclear Information System (INIS)

Datta Pramanik, U.; Chakraborty, S.; Rahaman, A.; Ray, J.; Chatterjee, S.; Bemmerer, D.; Elekes, Z.; Kempe, M.; Sobiella, M.; Stach, D.; Wagner, A.; Yakorev, D.; Leifels, Y.; Simon, H.

2011-01-01

A prototype of Multi-strip Multi-gap Resistive Plate Chamber (MMRPC) with active area 40 cm x 20 cm has been developed at SINP, Kolkata. Electron response of the developed detector was studied using the electron linac ELBE at Forschungszentrum Dresden-Rossendorf. The development of this detector started with the aim of developing a neutron detector but this ultrafast timing detector can be used efficiently for the purpose of medical imaging, security purpose and detection of minimum ionising particle. In this article detailed analysis of electron response to our developed MMRPC will be presented

Modelling of QUENCH-03 and QUENCH-06 Experiments Using RELAP/SCDAPSIM and ASTEC Codes

Directory of Open Access Journals (Sweden)

Tadas Kaliatka

2014-01-01

Full Text Available To prevent total meltdown of the uncovered and overheated core, the reflooding with water is a necessary accident management measure. Because these actions lead to the generation of hydrogen, which can cause further problems, the related phenomena are investigated performing experiments and computer simulations. In this paper, for the experiments of loss of coolant accidents, performed in Forschungszentrum Karlsruhe, QUENCH-03 and QUENCH-06 are modelled using RELAP5/SCDAPSIM and ASTEC codes. The performed benchmark allowed analysing different modelling features. The recommendations for the model development are presented.

GALAXI: Gallium anode low-angle x-ray instrument

Directory of Open Access Journals (Sweden)

Emmanuel Kentzinger

2016-03-01

Full Text Available The high brilliance laboratory small angle X-ray scattering instrument GALAXI, which is operated by JCNS, Forschungszentrum Jülich, permits the investigation of chemical correlations in bulk materials or of structures deposited on a surface at nanometre and mesoscopic length scales. The instrument is capable to perform GISAXS experiments in reflection at grazing incidence as well as SAXS experiments in transmission geometry. The X-ray flux on sample is comparable or higher than the one obtained at a comparable beamline at a second generation synchrotron radiation source.

The ADAM and EVE project: Heat transfer at ambient temperature

International Nuclear Information System (INIS)

Boltendahl, U.; Harth, R.

1980-01-01

In the nuclear research plant at Juelich a new heating system is at present being developed as part of the Nuclear Long-distance Heating Project. Helium is heated up in a high-temperature reactor. The heat chemically converts a gas mixture in a reformer plant (EVE). The gases 'charged' with energy can be transported through tubes over any distance required at ambient temperatures. In a methanisation plant (ADAM) the gases react with one another, releasing the energy in the form of heat which can be used for heating air or water. (orig.) [de

CIPANP 2006 Low Energy Hadron Physics Summary

International Nuclear Information System (INIS)

Schumacher, Reinhard A.

2006-01-01

Recent results in the areas of hypernuclear physics, exotic atoms, photo- and electro-production of light mesons and baryons, and medium modifications of meson properties were presented at this conference. Facility highlights presentations were given for five laboratories: the ELSA complex at Bonn, the LEPS facility at SPring-8, the CLAS facility at Jefferson Lab, the MAMI complex at Mainz, and the COSY complex at Juelich. These talks collectively showed remarkably active programs at all these laboratories, as well as at BNL, KEK, PSI, and Frascati. No 'brand new' results were reported at this conference

Prompt gamma cold neutron activation analysis applied to biological materials

International Nuclear Information System (INIS)

Rossbach, M.; Hiep, N.T.

1992-01-01

Cold neutrons at the external neutron guide laboratory (ELLA) of the KFA Juelich are used to demonstrate their profitable application for multielement characterization of biological materials. The set-up and experimental conditions of the Prompt Gamma Cold Neutron Activation Analysis (PGCNAA) device is described in detail. Results for C, H, N, S, K, B, and Cd using synthetic standards and the 'ratio' technique for calculation are reported for several reference materials and prove the method to be reliable and complementary with respect to the elements being determined by INAA. (orig.)

The hyperon-nucleon interaction

International Nuclear Information System (INIS)

Haidenbauer, J.

2007-01-01

Results of two recent hyperon-nucleon interaction potentials, both developed by the Bonn-Juelich group, are presented that are derived either in the conventional meson-exchange picture or within leading order chiral effective field theory. The chiral potential consists of one-pseudoscalar-meson exchanges and non-derivative four-baryon contact terms. The most salient feature of the new meson-exchange hyperon-nucleon model is that the contributions in the scalar-isoscalar (σ) and vector-isovector (ρ) exchange channels are constrained by a microscopic model of correlated ππ and KK-bar exchange

ITER baffle module small-scale mock-ups: first wall thermo-mechanical testing results

International Nuclear Information System (INIS)

Severi, Y.; Giancarli, L.; Poitevin, Y.; Salavy, J.F.; Le Marois, G.; Roedig, M.; Vieider, G.

1998-01-01

The EU-home team is in charge of the R and D related to the ITER baffle first wall. Five small-scale mock-ups, using Be, CFC and W tiles and different armour/heat-sink material joints under development, have been fabricated and thermomechanically tested in FE200 (Le Creusot) and JUDITH (Juelich) electron beam facilities. The small-scale mock-ups have been submitted to thermo-mechanical fatigue tests (up to failure using accelerating techniques). The objective was to determine the performances of the armour material joints under high heat flux cycles. (orig.)

Contributions for the chemistry, physics and technology of the elementary carbon in various states for the Carbon '76

International Nuclear Information System (INIS)

Delle, W.W.

1976-07-01

This report is the compilation of a number of papers prepared by KFA Juelich for the 2nd International Carbon Conference CARBON '76 at Baden-Baden, June 28th - July 2nd, 1976. The presentations deal with objectives of chemistry, physics and technology of the elementary carbon in various states including irradiation induced effects on graphite and pyrolytic carbon. The work was partly sponsored by the Bundesministerium fuer Forschung und Technologie of the Federal Republic of Germany as well as by the Government of North-Rhine-Westfalia. (orig.) [de

Advances in neutron scattering spectroscopy

International Nuclear Information System (INIS)

White, J.W.

1977-01-01

Some aspects of the application of neutron scattering to problems in polymer science, surface chemistry, and adsorption phenomena, as well as molecular biology, are reviewed. In all these areas, very significant work has been carried out using the medium flux reactors at Harwell, Juelich and Risoe, even without the use of advanced multidetector techniques or of a neutron cold source. A general tendency can also be distinguished in that, for each of these new fields, a distinct preference for colder neutrons rather than thermal neutron beams can be seen. (author)

Experimental investigation of neutron generation in thick target blocks of Pb, Hg and W with 0.4 to 2.5 GeV proton beams

International Nuclear Information System (INIS)

Jahnke, U.; Enke, M.; Filges, D.

2002-01-01

Detailed experimental neutron data relevant to the design of the target station of neutron spallation sources have been gathered by the NESSI-collaboration at the COSY accelerator in FZ Juelich. Numerous neutron multiplicity distributions and reaction probabilities have been measured for 0.4 to 2.5 GeV protons bombarding highly segmented target blocks from Pb, Hg and W of up to 35 cm in length and 15 cm in diameter with the intention to provide a comprehensive data base for the improvement and validation of existing reaction simulation codes. (author)

The Siemens-Argonaut reactor as a driver zone for a high-temperature reactor cell. Der Siemens-Argonaut-Reaktor als Treiberzone fuer eine Hochtemperaturreaktorzelle

Energy Technology Data Exchange (ETDEWEB)

Mueller, H; Schuerrer, F; Ninaus, W; Oswald, K; Rabitsch, H; Kreiner, H [Technische Univ., Graz (Austria). Inst. fuer Theoretische Physik und Reaktorphysik; Neef, R D [Kernforschungsanlage Juelich G.m.b.H. (Germany, F.R.). Inst. fuer Reaktorentwicklung

1984-12-15

To enable a validation of neutron physics calculation methods for pebble bed reactors the inner reflector of an Argonaut research reactor was substituted by a full of about 1200 fuel elements of the AVR-Juelich type. The report describes the measuring instruments and the reactor physical layout of the arrangement by the code packages GAMTEREX, ZUT-D.G.L. and MUPO. Comparison of calculated reaction rates with measurements show good agreement. Application of the codes to high-temperature reactors in abnormal states is envisaged. (Author, translated by G.Q.)

Institute of Energy and Climate Research IEK-6. Nuclear Waste Management report 2011/2012. Material science for nuclear waste management

International Nuclear Information System (INIS)

Klinkenberg, M.; Neumeier, S.; Bosbach, D.

2013-01-01

The nuclear waste management section of the Institute of Energy and Climate Research IEK-6 in Juelich is focused on research on radiochemistry aspects/materials science relevant for the long-term safety of nuclear waste storage and disposal. Studies on innovative waste management strategies include partitioning o actinides and the development of ceramic waste forms. Structural research is covering solid state chemistry, crystallography and computational science to model actinide containing compounds. With respect to waste management concepts nondestructive essay techniques, waste treatment procedures and product quality control strategies were developed.

Thermochemical hydrogen production studies at LLNL: a status report

International Nuclear Information System (INIS)

Krikorian, O.H.

1982-01-01

Currently, studies are underway at the Lawrence Livermore National Laboratory (LLNL) on thermochemical hydrogen production based on magnetic fusion energy (MFE) and solar central receivers as heat sources. These areas of study were described earlier at the previous IEA Annex I Hydrogen Workshop (Juelich, West Germany, September 23-25, 1981), and a brief update will be given here. Some basic research has also been underway at LLNL on the electrolysis of water from fused phosphate salts, but there are no current results in that area, and the work is being terminated

HET/JUPITER project assessment report

International Nuclear Information System (INIS)

Baxter, B.J.; Harrington, F.E.; Kaiser, G.G.; Wolf, J.

1979-05-01

This report is an assessment of the United States' Hot Engineering Test (HET) and the Federal Republic of Germany's Juelich Pilot Plant Thorium Element Reprocessing (JUPITER) Projects. The assessment was conducted with a view to developing mutually supportive roles in the achievement of hot engineering test objectives. Conclusions of the assessment are positive and identify several technical areas with potential for US/FRG cooperation. Recommendations presented in this report support a cost-effective US/FRG program to jointly develop high temperature gas-cooled reactor fuel recycle technology. (orig.) [de

Kernkraftwerke Lippe-Ems GmbH (KLE). 1995 annual report

International Nuclear Information System (INIS)

1996-01-01

The tasks and activities of the operators of the Emsland reactor station (KKE) are reported. The year-end statement of 1995 includes many details about the financial situation, (such as the balance sheet, profit and loss account, etc.). (UA) [de

Annual report 1988 of the Kernkraftwerk Obrigheim GmbH

International Nuclear Information System (INIS)

Koerner, C.

1989-01-01

The Obrigheim nuclear power station was operated at full load during the year 1988; 7.800 operating hours produced electrical energy of 2.755 GWh. This is the second best annual result during Obrigheim's operating period. Since commissioning in October 1968, 147.110 hours of operation have generated 49.436 GWh (gross) and from test operation in March 1969 until the end of 1988, 146.330 hours of operation have generated 49.324 GWh. This is an availability of power of 81.9% in this period and a time availability of 84.1%. In 1988, the plant was shut down for 927 hours for the 18th refueling including testing, inspection and repair work. Apart from refueling, the plant had a good time availability and therefore contributed 5% to the safe, economical and environmentally acceptable electricity supply of the Land Baden-Wuerttemberg. The power station is of great significance to the region, both in terms of power supply and the economy. (orig./HP) [de

Polarization observable of the elastic vector-p vector-p scattering fort energies up to 2.5 GeV. Experimental determination of spin correlation coefficients

International Nuclear Information System (INIS)

Bauer, F.

2001-01-01

EDDA is an internal experiment at the Cooler Synchrotron COSY of the Forschungszentrum Juelich. The detector is specialized for a detailed study of the elastic proton-proton-scattering and consists of two concentric scintillator hodoscopes of cylindrical symmetry, covering an angular range of 30 ≤θ cm ≤90 in the center of mass system. The reaction vertex and the scattering angle are reconstructed from the points of incidence through the two layers of the detector. The EDDA-Experiment measures angular distributions and excitation functions of five observables of the elastic proton-proton scattering in the energy range 500 MeV≤Tp ≤ 2500 MeV with focus on polarization observables. The first phase was devoted to the measurement of the unpolarized differential cross section dσ/dΩ, the second phase consisted of the measurement of the analyzing power A N . Both are finished and first results have been published. This work deals with the third phase of the EDDA-experiment: the determination of the three spin correlation coeffcients A SS , A NN and A SL , which were measured during three successive beam-times in November/December 1999, May/June 2000 and November/December 2000. For the measurements of the spin observables, a polarized atomic beam target was used with a typical target thickness of 1.8.10 11 cm-2 and effective polarizations between 60% and 70%. Some development during the different beam-times resulted in a polarized COSY-beam with up to 65% polarization at highest energies with 4.10 9 stored protons. These numbers convert into luminosities of 9.0.10 26 cm -2 s -1 ; they were insufficient to perform measurements only during beam acceleration, as it was done for dσ/dΩ and A N to obtain data with sufficient statistics needed for high internal consistency. To accumulate statistics at higher energies, data acquisition for A SS , A NN and A SL during beam acceleration (approx. 2 mio. events) was combined with measurements at some fixed energies. The

Forschungszentrum Rossendorf, Institute of Ion Beam Physics and Materials Research. Annual report 2004

International Nuclear Information System (INIS)

Borany, J. von; Heera, V.; Helm, M.; Jaeger, H.U.; Moeller, W.

2005-01-01

The following topics are dealt with: Silicon based electrically driven microcavity LED, ultraviolet electroluminescence from a Gd-implanted Si-metal-oxide-semiconductor device, semiconductor quantum-cascade lasers, ion beam synthesis and morphology of semiconductor memories, ion implantation, films, sputtering, ion-beam induced destabilization of nanoparticles. (HSI)

Forschungszentrum Rossendorf, Institute of Ion Beam Physics and Materials Research. Annual report 2004

Energy Technology Data Exchange (ETDEWEB)

Borany, J. von; Heera, V.; Helm, M.; Jaeger, H.U.; Moeller, W. (eds.)

2005-07-01

The following topics are dealt with: Silicon based electrically driven microcavity LED, ultraviolet electroluminescence from a Gd-implanted Si-metal-oxide-semiconductor device, semiconductor quantum-cascade lasers, ion beam synthesis and morphology of semiconductor memories, ion implantation, films, sputtering, ion-beam induced destabilization of nanoparticles. (HSI)

The Text of the Agreement of 22 July 1977 between Argentina and the Agency for the Application of Safeguards in Connection with a Contract Concluded between the Comision Nacional de Energia Atomica (Argentina) and the Reaktor Brennelement Union Gmbh Hanau (Federal Republic of Germany) for Co-Operation in the Field of Fabrication of Fuel Elements for Peaceful Nuclear Activities

International Nuclear Information System (INIS)

1977-01-01

The text of the Agreement of 22 July 1977 between Argentina and the Agency for the application of safeguards in connection with the Contract of 13 August 1976 concluded between the Comision Nacional de Energia Atomica (Argentina) and the Reaktor Brennelement Union GmbH (Federal Republic of Germany) for co-operation in the field of fabrication of fuel elements for peaceful nuclear activities is reproduced in this document for the information of all Members. The Agreement entered into force, pursuant to Section 26, on 22 July 1977.

The Text of the Agreement of 22 July 1977 between Argentina and the Agency for the Application of Safeguards in Connection with a Contract Concluded between the Comision Nacional de Energia Atomica (Argentina) and the Reaktor Brennelement Union Gmbh Hanau (Federal Republic of Germany) for Co-Operation in the Field of Fabrication of Fuel Elements for Peaceful Nuclear Activities

Energy Technology Data Exchange (ETDEWEB)

NONE

1977-11-30

The text of the Agreement of 22 July 1977 between Argentina and the Agency for the application of safeguards in connection with the Contract of 13 August 1976 concluded between the Comision Nacional de Energia Atomica (Argentina) and the Reaktor Brennelement Union GmbH (Federal Republic of Germany) for co-operation in the field of fabrication of fuel elements for peaceful nuclear activities is reproduced in this document for the information of all Members. The Agreement entered into force, pursuant to Section 26, on 22 July 1977.

Decontamination of nuclear graphite by thermal processing; Dekontamination von Nukleargraphit durch thermische Behandlung

Energy Technology Data Exchange (ETDEWEB)

Florjan, Monika W.

2010-04-15

The main problem in view of the direct disposal of the nuclear graphite is its large volume. This waste contains long-lived and short-lived radionuclides which determine the waste strategy. The irradiated graphite possess high amount of the {sup 14}C isotope. The main object of the present work was the selective separation of {sup 14}C isotope from the isotope {sup 12}C by thermal treatment (pyrolysis, partial oxidation). A successful separation could reduce the radiotoxicity and offer a different disposal strategy. Three different graphite types were investigated. The samples originate from the reflector and from the flaking of spherical fuel elements of the high-temperature reactor (AVR) Juelich. The samples from the thermal column of the research reactor (Merlin, Juelich) were also investigated. The maximum tritium releases were obtained both in inert gas atmosphere (N{sub 2}) and under water vapour-oxidizing conditions at 1280 C and 900 C. Furthermore it could be shown that 28% of {sup 14}C could be released under inert gas conditions at a 1280 C. By additive of oxidizing agent such as water vapour and oxygen the {sup 14}C release could be increased. Under water vapour-oxidizing conditions at a temperature of 1280 C up to 93% of the {sup 14}C was separated from the graphite. The matrix corrosion of 5.4% was obtained. The selective separation of the {sup 14}C is possible, because a substantial part of the radiocarbon is bound near the grain boundary surfaces. (orig.)

Production of hydrogen, nitrogen and argon pellets with the Moscow-Juelich pellet target

International Nuclear Information System (INIS)

Buescher, M.; Boukharov, A.; Semenov, A.; Gerasimov, A.; Chernetsky, V.; Fedorets, P.

2009-01-01

Targets of frozen droplets ("pellets") from various liquefiable gases like H 2 , D 2 , N 2 , Ne, Ar, Kr and Xe are very promising for high luminosity experiments with a 4π detector geometry at storage-rings. High effective target densities (> 10 15 atoms/cm 2 ), a small target size (⊘ ≈ 20–30 μm), a low gas load and a narrow pellet beam are the main advantages of such targets. Pioneering work on pellet targets has been made at Uppsala, Sweden. A next generation target has been built at the IKP of FZJ in collaboration with two institutes (ITEP and MPEI) from Moscow, Russia. It is a prototype for the future pellet target at the PANDA experiment at FAIR/HESR (supported by INTAS 06-1000012-8787, 2007/08) and makes use of a new cooling and liquefaction method, based on cryogenic liquids instead of cooling machines. The main advantages of this method are the vibration-free cooling and the possibility for cryogenic jet production from various gases in a wide range of temperatures. Different regimes of pellet production from H 2 , N 2 and Ar have been observed and their parameters have been measured. For the first time, mono-disperse and satellite-free droplet production was achieved for cryogenic liquids from H 2 , N 2 and Ar. (author)

Latest developments of neutron scattering instrumentation at the Juelich Centre for Neutron Science

International Nuclear Information System (INIS)

Ioffe, Alexander

2013-01-01

Jülich Centre for Neutron Science (JCNS) is operating a number of world-class neutron scattering instruments situated at the most powerful and advanced neutron sources (FRM II, ILL and SNS) and is continuously undertaking significant efforts in the development and upgrades to keep this instrumentation in line with the continuously changing scientific request. These developments are mostly based upon the latest progress in neutron optics and polarized neutron techniques. For example, the low-Q limit of the suite of small angle-scattering instruments has been extended to 4·10 -5 Å -1 by the successful use of focusing optics. A new generation of correction elements for the neutron spin-echo spectrometer has allowed for the use of the full field integral available, thus pushing further the instrument resolution. A significant progress has been achieved in the developments of 3 He neutron spin filters for purposes of the wide-angle polarization analysis for off-specular reflectometry and (grazing incidence) small-angle neutron scattering, e.g. the on-beam polarization of 3 He in large cells is allowing to achieve a high neutron beam polarization without any degradation in time. The wide Q-range polarization analysis using 3 He neutron spin filters has been implemented for small-angle neutron scattering that lead to the reduction up to 100 times of the intrinsic incoherent background from non-deuterated biological molecules. Also the work on wide-angle XYZ magnetic cavities (Magic PASTIS) will be presented. (author)

EPOS-An intense positron beam project at the ELBE radiation source in Rossendorf

International Nuclear Information System (INIS)

Krause-Rehberg, R.; Sachert, S.; Brauer, G.; Rogov, A.; Noack, K.

2006-01-01

EPOS, the acronym of ELBE Positron Source, describes a running project to build an intense pulsed beam of mono-energetic positrons (0.2-40 keV) for materials research. Positrons will be created via pair production at a tungsten target using the pulsed 40 MeV electron beam of the superconducting linac electron linac with high brilliance and low emittance (ELBE) at Forschungszentrum Rossendorf (near Dresden, Germany). The chosen design of the system under construction is described and results of calculations simulating the interaction of the electron beam with the target are presented, and positron beam formation and transportation is also discussed

Manual for operation of the multipurpose thermalhydraulic test facility TOPFLOW (Transient Two Phase Flow Test Facility)

International Nuclear Information System (INIS)

Beyer, M.; Carl, H.; Schuetz, H.; Pietruske, H.; Lenk, S.

2004-07-01

The Forschungszentrum Rossendorf (FZR) e. V. is constructing a new large-scale test facility, TOPFLOW, for thermalhydraulic single effect tests. The acronym stands for transient two phase flow test facility. It will mainly be used for the investigation of generic and applied steady state and transient two phase flow phenomena and the development and validation of models of computational fluid dynamic (CFD) codes. The manual of the test facility must always be available for the staff in the control room and is restricted condition during operation of personnel and also reconstruction of the facility. (orig./GL)

Results of the ITER toroidal field model coil project

International Nuclear Information System (INIS)

Salpietro, E.; Maix, R.

2001-01-01

In the scope of the ITER EDA one of the seven largest projects was devoted to the development, manufacture and testing of a Toroidal Field Model Coil (TFMC). The industry consortium AGAN manufactured the TFMC based on on a conceptual design developed by the ITER EDA EU Home Team. The TFMC was completed and assembled in the test facility TOSKA of the Forschungszentrum Karlsruhe in the first half of 2001. The first testing phase started in June 2001 and lasted till October 2001. The first results have shown that the main goals of the project have been achieved

Thin and thick target benchmark investigations to validate spallation physics models

International Nuclear Information System (INIS)

Filges, D.; Neef, R.D.; Goldenbaum, F.; Nuenighoff, K.; Galin, J.; Letourneau, A.; Lott, B.; Patois, Y.; Schroeder, W.N.

1999-01-01

In the ESS (European Spallation Source) study report several areas have been identified where further spallation physics research and code validation is urgently needed: Neutron and charged particle production and multiplicities above one GeV incident protons, energy deposition and heating, material damage parameters, radioactivity and after heat, and high energy source shielding. All simulation calculations will be done using the Juelich HERMES code system. For this purpose various collaborations were organised. One of the collaborations is NESSI (Neutron Scintillator Silicon Detector), which concerns fundamental data as cross-section measurements on neutron multiplicities and charged particles for different ESS relevant materials. (author)

The polarized atomic-beam target for the EDDA experiment and the time-reversal invariance test at COSY

International Nuclear Information System (INIS)

Eversheim, P.D.; Altmeier, M.; Felden, O.

1996-01-01

For the the EDDA experiment, which was set up to measure the p-vector - p-vector excitation function during the acceleration ramp of the cooler synchrotron COSY at Juelich, a polarized atomic-beam target was designed regarding the restrictions imposed by the geometry of the EDDA detector. Later, when the time-reversal invariance experiment is to be performed, the EDDA detector will serve as efficient internal polarimeter and the source has to deliver tensor polarized deuterons. The modular design of this polarized atomic-beam target that allows to meet these conditions are discussed in comparison to other existing polarized atomic-beam targets. (orig.)

Abbreviations used in scientific and technical reports

International Nuclear Information System (INIS)

Sun Chang.

1986-04-01

Reports contain a large number of abbreviations which have not yet been included in the current specialized dictionaries or lists of abbreviations. It is therefore often time-consuming or even fruitless to search for such abbreviations. The present alphabetical list of more than 4,000 abbreviations gathered from the report inventory of the Central Library of the KFA Juelich in the period from 1982-1986, taking into consideration all the scientific and technical disciplines, is intended to remedy a deficiency and to offer assistance which will undoubtedly be welcomed by scientists and engineers. (orig./HP) [de

Nuclear energy research in Germany 2008. Research centers and universities

International Nuclear Information System (INIS)

Tromm, Walter

2009-01-01

This summary report presents nuclear energy research at research centers and universities in Germany in 2008. Activities are explained on the basis of examples of research projects and a description of the situation of research and teaching in general. Participants are the - Karlsruhe Research Center, - Juelich Research Center (FZJ), - Dresden-Rossendorf Research Center (FZD), - Verein fuer Kernverfahrenstechnik und Analytik Rossendorf e.V. (VKTA), - Technical University of Dresden, - University of Applied Sciences, Zittau/Goerlitz, - Institute for Nuclear Energy and Energy Systems (IKE) at the University of Stuttgart, - Reactor Simulation and Reactor Safety Working Group at the Bochum Ruhr University. (orig.)

Maw and spent HTR Fuel Element Test storage in Boreholes in rock salt

International Nuclear Information System (INIS)

Barnert, E.; Brucher, P.H.; Kroth, K.; Merz, E.; Niephaus, D.

1986-01-01

The Budesminister fur Forschung und Technolgie (BMFT, Federal Ministry for Research and Technology) is sponsoring a project at the Kernforschungsanlage Julich (KFA, Juelich Nuclear Research Centre) entitled ''MAW and HTR Fuel Element Test disposal in Boreholes.'' The aim of this project is to develop a technique for the final disposal of (1) dissolver sludge, (2) cladding hulls/structural components and (3) spent HTR fuels elements in salt, and to test this technique in the abandoned Asse salt mine, including safety calculations and safety engineering demonstrations. The project is divided into the sub-projects I ''Disposal/sealing technique'' and II ''Retrievable disposal test.''

Exploring some Australian energy alternatives using MARKAL

Energy Technology Data Exchange (ETDEWEB)

Musgrove, A.R.D.; Stocks, K.J.; Essam, P.; Le, D.; Hoetzl, J.V.

1983-01-01

MARKAL is a linear programming model for the optimisation of the technologies associated with energy supply and demand within the complete energy system of a country as it evolves over a given time period. It was developed in the course of a project sponsored by the International Energy Agency, which was carried out at two main centres: Kernforschungsanlage, Juelich, FRG, and Brookhaven National Laboratory, Upton, New York, USA, Australia's participation in the Project has enabled the latest version of MARKAL to be installed on the computer at the Lucas Heights Research Laboratories together with the necessary supporting software programs.

The nuclear disposal challenge

International Nuclear Information System (INIS)

2011-01-01

In Germany, GNS Gesellschaft fuer Nuklear-Service mbH is in charge of all operations regarding the management of waste and residual materials from nuclear power plants. Jointly with its subsidiaries, GNS is reliably ensuring the safe packaging, treatment, transport and interim storage of these materials. Moreover, as the inventor and manufacturer of the CASTOR registered casks, GNS is the global leader in the field of casks for HLW. At its locations in Essen, Muelheim, Duisburg, Juelich, Karlsruhe, Ahaus and Gorleben, the GNS group has more than 550 employees and achieves a yearly turnover of more than 200 million Euro. (orig.)

Incineration plant for low active waste at Inshass, LAWI

International Nuclear Information System (INIS)

Krug, W.; Thoene, L.; Schmitz, H.J.; Abdelrazek, I.D.

1993-10-01

The LAWI (Low Active Waste Incinerator) prototype incinerating plant was devised and constructed according to the principle of the Juelich thermoprocess and installed at the Egyptian research centre Inshass. In parallel, AEA Cairo devised and constructed their own operations building for this plant with all the features, infrastructural installations and rooms required for operating the plant and handling and treating low-level radioactive wastes. The dimensions of this incinerator were selected so as to be sufficient for the disposal of solid, weakly radioactive combustible wastes from the Inshass Research Centre and the environment (e.g. Cairo hospitals). (orig./DG) [de

Proceedings of the international meeting on research and test reactor core conversions from HEU to LEU fuels

Energy Technology Data Exchange (ETDEWEB)

Travelli, A [Argonne National Laboratory, Argonne, IL (United States)

1983-09-01

Conversion of research and test reactor cores from the use of high enrichment uranium to the use of low enrichment uranium depends on the cooperation of many research organizations, reactor operators, and government agencies. At a technical level, it involves almost all aspects of the fuel cycle, including fuel development, testing, shipping and reprocessing; experiment performance; economics; and safety and licensing aspects. The reactors involved and the conversion activities are distributed among approximately 25 countries, making this a subject which is best dealt with on an international basis. To foster direct communication in this area, the Reduced Enrichment Research and Test Reactor (RERTR) Program, at the Argonne National Laboratory, sponsored this meeting as the fifth of a series which began in 1978. The previous meetings were held at Argonne (International Meeting of Research Reactor Fuel Designers, Developers, and Fabricators, Argonne National Laboratory, Argonne, U.S.A., November 910, 1978), at Saclay (IAEA Consultants' Meeting on Research Reactor Core Conversions from HEU to LEU, Centre d'etudes Nucleaires de Saclay, Saclay, France, December 12-14, 1979), at Argonne (International Meeting on Development, Fabrication and Application of Reduced Enrichment Fuels for Research and Test Reactors, Argonne National Laboratory, Argonne, U.S.A., November 12-14, 1980) and at Juelich (Seminar on Research Reactor Operation and Use, Juelich Nuclear Research Center, Juelich, F.R.G., September 48, 1981). Proceedings from the two most recent previous meetings were published as ANL/RERTR/TM-3 (CONF-801144) and IAEA-SR-77. The spirit of this meeting differs slightly from that of the previous meetings. The advances which have been made and the growing maturity of the effort have caused a gradual shift of emphasis away from those topics which dominated the floor during the first meetings, such as fuel and methods development, and towards topics which concern more

Proceedings of the international meeting on research and test reactor core conversions from HEU to LEU fuels

International Nuclear Information System (INIS)

Travelli, A.

1983-09-01

Conversion of research and test reactor cores from the use of high enrichment uranium to the use of low enrichment uranium depends on the cooperation of many research organizations, reactor operators, and government agencies. At a technical level, it involves almost all aspects of the fuel cycle, including fuel development, testing, shipping and reprocessing; experiment performance; economics; and safety and licensing aspects. The reactors involved and the conversion activities are distributed among approximately 25 countries, making this a subject which is best dealt with on an international basis. To foster direct communication in this area, the Reduced Enrichment Research and Test Reactor (RERTR) Program, at the Argonne National Laboratory, sponsored this meeting as the fifth of a series which began in 1978. The previous meetings were held at Argonne (International Meeting of Research Reactor Fuel Designers, Developers, and Fabricators, Argonne National Laboratory, Argonne, U.S.A., November 910, 1978), at Saclay (IAEA Consultants' Meeting on Research Reactor Core Conversions from HEU to LEU, Centre d'etudes Nucleaires de Saclay, Saclay, France, December 12-14, 1979), at Argonne (International Meeting on Development, Fabrication and Application of Reduced Enrichment Fuels for Research and Test Reactors, Argonne National Laboratory, Argonne, U.S.A., November 12-14, 1980) and at Juelich (Seminar on Research Reactor Operation and Use, Juelich Nuclear Research Center, Juelich, F.R.G., September 48, 1981). Proceedings from the two most recent previous meetings were published as ANL/RERTR/TM-3 (CONF-801144) and IAEA-SR-77. The spirit of this meeting differs slightly from that of the previous meetings. The advances which have been made and the growing maturity of the effort have caused a gradual shift of emphasis away from those topics which dominated the floor during the first meetings, such as fuel and methods development, and towards topics which concern more

High Confinement and High Density with Stationary Plasma Energy and Strong Edge Radiation Cooling in Textor-94

Science.gov (United States)

Messiaen, A. M.

1996-11-01

A new discharge regime has been observed on the pumped limiter tokamak TEXTOR-94 in the presence of strong radiation cooling and for different scenarii of additional hearing. The radiated power fraction (up to 90%) is feedback controlled by the amount of Ne seeded in the edge. This regime meets many of the necessary conditions for a future fusion reactor. Energy confinement increases with increasing densities (reminiscent of the Z-mode obtained at ISX-B) and as good as ELM-free H-mode confinement (enhancement factor verus ITERH93-P up to 1.2) is obtained at high densities (up to 1.2 times the Greenwald limit) with peaked density profiles showing a peaking factor of about 2 and central density values around 10^14cm-3. In experiments where the energy content of the discharges is kept constant with an energy feedback loop acting on the amount of ICRH power, stable and stationary discharges are obtained for intervals of more than 5s, i.e. 100 times the energy confinement time or about equal to the skin resistive time, even with the cylindrical q_α as low as 2.8 β-values up to the β-limits of TEXTOR-94 are achieved (i.e. β n ≈ 2 of and β p ≈ 1.5) and the figure of merit for ignition margin f_Hqa in these discharges can be as high as 0.7. No detrimental effects of the seeded impurity on the reactivity of the plasma are observed. He removal in these discharges has also been investigated. [1] Laboratoire de Physique des Plasmas-Laboratorium voor Plasmafysica, Association "EURATOM-Belgian State", Ecole Royale Militaire-Koninklijke Militaire School, Brussels, Belgium [2] Institut für Plasmaphysik, Forschungszentrum Jülich, GmbH, Association "EURATOM-KFA", Jülich, Germany [3] Fusion Energy Research Program, Mechanical Engineering Division, University of California at San Diego, La Jolla, USA [4] FOM Institüt voor Plasmafysica Rijnhuizen, Associatie "FOM-EURATOM", Nieuwegein, The Netherlands [*] Researcher at NFSR, Belgium itemize

77 FR 27661 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2012-05-11

... by two reports of the plain journal bearings moving in relation to the main rotor swashplate sliding... plain journal bearing, which could limit the movement of the collective control and result in subsequent... summarizing each substantive public contact with FAA personnel concerning this proposed rulemaking. Before...

78 FR 77380 - Airworthiness Directives; Dornier Luftfahrt GmbH Airplanes

Science.gov (United States)

2013-12-23

... wire(s) and assure correct installation of the wiring in the flight deck overhead panels by reattaching... damaged wiring on the flight deck overhead panels (5VE and 6VE). We are issuing this proposed AD to... identified as mandatory actions for continued airworthiness. In 2005, chafed wiring was found on 5VE Panel...

77 FR 52265 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2012-08-29

... total area of corrosion or thread damage, or both, covers less than 25 percent of the length of the... paragraph (d)(3) of this AD. (B) If the total area of corrosion or thread damage, or both, covers 25 percent... to require inspections for corrosion or thread damage to each tail rotor balance weight (weight) and...

78 FR 52410 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2013-08-23

... corrosion or thread damage, or both, covers less than 25 percent of the length of the threaded area, the...) If the total area of corrosion or thread damage, or both, covers 25 percent or more of the length of... inspections for corrosion or thread damage to each tail rotor balance weight (weight) and each tail rotor...

78 FR 48599 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2013-08-09

...-reference service information, the economic evaluation, any comments received, and other information. The...;Prices of new books are listed in the first FEDERAL REGISTER issue of each #0;week. #0; #0; #0; #0;#0... justifies making a regulatory distinction; and (4) Will not have a significant economic impact, positive or...

78 FR 42677 - Airworthiness Directives; Austro Engine GmbH Engines

Science.gov (United States)

2013-07-17

...;Prices of new books are listed in the first FEDERAL REGISTER issue of each #0;week. #0; #0; #0; #0;#0... making a regulatory distinction, and (4) Will not have a significant economic impact, positive or..., Aviation safety, Incorporation by reference, Safety. Adoption of the Amendment Accordingly, under the...

77 FR 37777 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2012-06-25

... power display when a generator is deactivated and provides procedures to prevent failure of the remaining generator. Before we issued that AD, the manufacturer developed a procedure to modify the two... Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE., Washington, DC 20590...

78 FR 44050 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2013-07-23

..., and subsequent loss of helicopter control. DATES: We must receive comments on this proposed AD by... could result in failure of an engine, loss of engine power, and subsequent loss of helicopter control... corrosion, leaking grease, condensation, or water. This proposed AD is prompted by metallic debris from an...

77 FR 44116 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2012-07-27

... on the operator handle has been deactivated, the rescue winch may be used. Costs of Compliance We... technical representative, has notified us of the unsafe condition described in the EASA AD. We are issuing.... The EASA AD also applies to the MBB-BK 117 A-1 model. Eurocopter informs us that the MBB-BK 117 A-1...

78 FR 31394 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2013-05-24

... Agency (EASA), which is the Technical Agent for the Member States of the European Union, issued EASA AD... short circuit on the yaw Smart Electro-Mechanical Actuator (SEMA) ``ACTIV'' input to ground led to the...

78 FR 26715 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2013-05-08

... injection tubes during an engine fire, which could result in impaired distribution of the fire extinguishing... system injection tubes. This proposed AD is prompted by a report that the injection tubes are deforming... injection tubes during a fire, which could result in impaired distribution of the fire extinguishing agent...

78 FR 56597 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2013-09-13

... extinguishing system injection tubes during an engine fire, which could result in impaired distribution of the... injection tubes. This AD is prompted by a report that the injection tubes are deforming due to heat. The actions required by this AD are intended to prevent deformation of the fire extinguishing system injection...

77 FR 21400 - Airworthiness Directives; DG Flugzeugbau GmbH Sailplanes

Science.gov (United States)

2012-04-10

... Directorate, 901 Locust, Kansas City, Missouri 64106. For information on the availability of this material at...: Discussion We issued a supplemental notice of proposed rulemaking (SNPRM) to amend 14 CFR part 39 to include... in issue 3, dated 13 September 2011, for the English language version and in issue 2, dated 22...

78 FR 70209 - Airworthiness Directives; XtremeAir GmbH Airplanes

Science.gov (United States)

2013-11-25

... Locust, Kansas City, Missouri 64106. For information on the availability of this material at the FAA... INFORMATION: Discussion The European Aviation Safety Agency (EASA), which is the Technical Agent [[Page 70210...-2013-008, Ausgabe (English translation: Version) A.03, dated October 25, 2013. The replacement required...

76 FR 76330 - Airworthiness Directives; DG Flugzeugbau GmbH Sailplanes

Science.gov (United States)

2011-12-07

... Directorate, 901 Locust, Kansas City, Missouri 64106. For information on the availability of this material at... proposed AD. Discussion The European Aviation Safety Agency (EASA), which is the Technical Agent for the... 13 September 2011, for the English language version and in issue 2, dated 22 October 2008, for the...

78 FR 40047 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2013-07-03

... through Friday, except Federal holidays. The AD docket contains this proposed AD, the economic evaluation... entities under the criteria of the Regulatory Flexibility Act. We prepared an economic evaluation of the..., P2, P2+, T1, T2, and T2+ helicopters, serial number (S/N) 0005 through 00829, with a tail rotor...

77 FR 69558 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2012-11-20

..., EC135 T2, and EC135 T2+ helicopters. This is the Federal Register publication of an Emergency AD (EAD... through Friday, except Federal holidays. The AD docket contains this AD, the economic evaluation, any... economic evaluation of the estimated costs to comply with this AD and placed it in the AD docket. List of...

Photochemical aging of secondary organic aerosols: effects on hygroscopic growth and CCN activation

Science.gov (United States)

Buchholz, A.; Mentel, Th. F.; Tillmann, R.; Schlosser, E.; Mildenberger, K.; Clauss, T.; Henning, S.; Kiselev, A.; Stratmann, F.

2009-04-01

Plant emitted volatile organic carbons (VOCs) are a major precursor of secondary organic aerosols (SOA), an important constituent of atmospheric aerosols. The precursors are oxidized via ozonolysis, photooxidation, or by NO3 and form aerosol particles. Due to further oxidation of the organic matter the composition of the SOA may age with time. This will also change the hygroscopic growth (HG) and cloud condensation nuclei (CCN) activation of the particles. In this study we generated and aged SOA in the SAPHIR chamber at the Research Centre Juelich under near atmospheric conditions: natural sunlight, low precursor and O3 concentrations, and long reaction times. As precursor we used a mixture of 5 monoterpenes (MT) or 5 MT with 2 sesquiterpenes which had been identified as major constituents of plant emissions in previous experiments. Concentrations ranged between 4 and 100 ppb MT and the total reaction time was 36h. HG was measured at RH=10-97% by a Hygroscopic Tandem Differential Analyser (HTDMA, FZ Juelich) and at RH=97-99% by the Leipzig Aerosol Cloud Interaction Simulator (LACIS-mobile, IfT Leipzig). The agreement between HTDMA and LACIS-mobile data was generally good. CCN properties were measured with a continuous flow CCN Counter from DMT. SOA particles generated on a sunny day were more hygroscopic and had a lower activation diameter (Dcrit) than SOA formed under cloudy conditions. With aging it became more hygroscopic and Dcrit decreased. Sunlight enhanced this effect. But the change in HG and Dcrit due to aging was less than the difference between SOA generated under different conditions (i.e. sunny or cloudy). We did not observe a dependence of the HG on the precursor concentration.

Inelastic neutron scattering and spectral measurements of advanced cold moderator materials

International Nuclear Information System (INIS)

Conrad, H.; Prager, M.; Nuenighoff, K.; Pohl, C.; Kuhs, W.F.

2004-01-01

Inelastic neutron scattering with emphasis on energetically low lying modes as well as cold neutron leakage measurements have been performed on four prospective advanced cold moderator materials. Employing the time-of-flight instrument SV29 at the Juelich FRJ-2 reactor, spectra have been obtained from synthetic methane clathrate, tetrahydro-furane (THF) clathrate, 1,3,5-trimethyl-benzene (mesitylene) and light water ice at several temperatures between 2 K and 70 K. Clearly separated excitations at energy transfers of ±1 meV, +2 meV and +3 meV have been observed with synthetic methane clathrate. In mesitylene a wealth of low lying excitations have been observed. In the quenched phase we found lines at 4.7, 7.2, 9.6, 13.6, 15.4, 18.4, 19.0, 23.0, 29.5 and 34.3 meV, respectively. In the annealed phase, we observed significant shifts with the majority of lines. The lowest lying lines now are located at 7.0, 8.5 and 10.5 meV, respectively. In hexagonal ice at T=2 K up to now unreported low lying energy levels were found at energy transfers of 1.8 meV and 2.8 meV. An additional line at about 10 meV could be detected in THF clathrate. Mesitylene, synthetic methane clathrate and water ice, all at T=20 K, have been tested as moderators at the Juelich spallation mock-up JESSICA. The expected gain in neutron leakage current at energies around 2 meV as compared to conventional liquid hydrogen moderators has been observed for methane clathrate and mesitylene. (orig.)

Program for Energy Research and Technologies 1977--1980. Annual report 1977 on efficient uses of energy fossil sources of primary energy new sources of energy

Energy Technology Data Exchange (ETDEWEB)

1978-01-01

The main objectives within the policy of the Federal Government Program for Energy Research and Technologies 1977--1980 can be summarized as follows: guaranteeing the continuity of energy supply in the medium to long term in the Federal Republic at economically favourable costs considering the requirements necessary for the protection of the environment and population. The financial support is effected under the general headings of Development of Energy Resources, Energy Conservation and Efficient Use of Energy. An additional aspect of the support policy is the development of technologies which are of importance for other countries, specifically for the developing countries. Support of a project is effected through a research and development grant from the Federal Government and this can range from less than 50% to 100%. For this the Government receives an irrevocable, free of charge and non-exclusive right to make use of research and development results. In special cases full repayment is agreed subject to commercial success. Based on agreements signed by the Federal Minister of Research and Technology and the Federal Minister of Economic Affairs on the one hand and the Juelich Nuclear Research Establishment (KFA) on the other, the Project Management for Energy Research (PLE) in KFA Juelich is acting on behalf of these Ministries. The Project Management's activities in non-nuclear energy research in general (for the Federal Ministry of Research and Technology) and development and innovation in coal mining and preparation (for the Federal Ministry of Economic Affairs) have the following general objectives: to improve the efficiency of Government support; to ensure that projects are efficiently handled; and to reduce the workload of the Ministries. The individual projects are listed and described briefly.

Forschungszentrum Karlsruhe Technik und Umwelt. Research and development program 2001 and program budget 2001

International Nuclear Information System (INIS)

2001-01-01

The Karlsruhe Research Center is a national research center founded and substantially funded by the German Federal Government and the Land government of Baden-Wuerttemberg, the federal state where it is located. It is a member of the Hermann von Helmholtz-Gemeinschaft Deutscher Forschungszentren and is one of the most important, independent research centers in Germany working in the fields of the natural sciences and engineering sciences. The Center's R and D programmes encompass research activities up to pre-industrial scale as well as product and process development, research for precautionary policy and purposes, and fundamental research. The focal points of the R and D programme 2001 are explained under the following subject titles: - Environment - Public Health - Energy - Key Technologies - Fundamental Research. The programme reveals the shift of emphasis of activities which commenced in the early 1980s, away from nuclear engineering as the major focus in the early days towards a much wider spectrum of activities today, characterized by aspects such as complexity of tasks, long-term planning, and the need for cross-disciplinary and multilateral cooperation. The second volume of the publication explains the programme budget and apportionment of funds. (orig./CB) [de

ECO steam explosion experiments on the conversion of thermal into mechanical energy

International Nuclear Information System (INIS)

Cherdron, W.; Kaiser, A.; Schuetz, W.; Will, H.

2001-01-01

In case of a steam explosion, e.g. as a consequence of a severe reactor accident, part of the thermal energy of the melt is transferred into mechanical energy. At Forschungszentrum Karlsruhe, so-called ECO experiments, are being directed to measure the conversion factor under well-defined conditions. In ECO, alumina from a thermite reaction is used as a simulating material instead of corium. Dimensions of the test facility as well as major test conditions, e.g. temperature and release mode of the melt, water inventory and test procedure, are based on the former PREMIX experimental series. In the paper, results of the first test, ECO 01, are given. (orig.)

Cs2Te normal conducting photocathodes in the superconducting rf gun

CERN Document Server

Xiang, R; Buettig, H; Janssen, D; Justus, M; Lehnert, U; Michel, P; Murcek, P; Schamlott, A; Schneider, Ch; Schurig, R; Staufenbiel, F; Teichert, J

2010-01-01

The superconducting radio frequency photoinjector (SRF gun) is one of the latest applications of superconducting rf technology in the accelerator field. Since superconducting photocathodes with high quantum efficiency are yet unavailable, normal conducting cathode material is the main choice for SRF photoinjectors. However, the compatibility between the photocathode and the cavity is one of the challenges for this concept. Recently, a SRF gun with Cs2Te cathode has been successfully operated in Forschungszentrum Dresden-Rossendorf. In this paper, we will present the physical properties of Cs2Te photocathodes in the SC cavity, such as the quantum efficiency, the lifetime, the rejuvenation, the charge saturation, and the dark current.

Mechanized hyperbaric welding by robots

International Nuclear Information System (INIS)

Aust, E.; Santos, J.F. dos; Bohm, K.H.; Hensel, H.D.

1988-01-01

At the GKSS-Forschungszentrum investigations are carried out on mechanized welded test plates produced under working pressure between 10 to 110 bar in breathable TRIMIX-5-atmosphere. The welds are performed by a modified industrial robot, which was adapted in its components to withstand these severe conditions. Variations on the welding parameters were made to maintain a stable arc as well as to provide on indication of the effect of the variables on the mechanical properties of the welded joint. During all tests the robot showed a very good function. Good reliable welds were achieved meeting the requirements according API II04 or BS 4515-1984. (orig.) [de

Search for electric dipole moments in storage rings

Directory of Open Access Journals (Sweden)

Lenisa Paolo

2016-01-01

Full Text Available The JEDI collaboration aims at making use of storage ring to provide the most precise measurement of the electric dipole moments of hadrons. The method makes exploits a longitudinal polarized beam. The existence an electric dipole moment would generate a torque slowly twisting the particle spin out of plan of the storage ring into the vertical direction. The observation of non zero electric dipole moment would represent a clear sign of new physics beyond the Standard Model. Feasiblity tests are presently undergoing at the COSY storage ring Forschungszentrum Jülich (Germany, to develop the novel techniques to be implemented in a future dedicated storage ring.