force-free harris sheet: Topics by WorldWideScience.org

Sample records for force-free harris sheet

One-Dimensional Vlasov-Maxwell Equilibrium for the Force-Free Harris Sheet

International Nuclear Information System (INIS)

Harrison, Michael G.; Neukirch, Thomas

2009-01-01

In this Letter, the first nonlinear force-free Vlasov-Maxwell equilibrium is presented. One component of the equilibrium magnetic field has the same spatial structure as the Harris sheet, but whereas the Harris sheet is kept in force balance by pressure gradients, in the force-free solution presented here force balance is maintained by magnetic shear. Magnetic pressure, plasma pressure and plasma density are constant. The method used to find the equilibrium is based on the analogy of the one-dimensional Vlasov-Maxwell equilibrium problem to the motion of a pseudoparticle in a two-dimensional conservative potential. The force-free solution can be generalized to a complete family of equilibria that describe the transition between the purely pressure-balanced Harris sheet to the force-free Harris sheet
Lower hybrid drift instability in modified Harris current sheet with negative ions

International Nuclear Information System (INIS)

Huang Feng; Chen, Y-H; Shi Guifen; Hu, Z-Q; Yu, M Y

2008-01-01

The lower hybrid drift instability (LHDI) in a Harris current sheet with negative ions is investigated using the kinetic theory. Numerical results show that the negative ions have considerable effect on the LHDI. With increase of the negative-ion concentration, the growth rate of the LHDI increases and its real frequency decreases for any wave length. The Harris current sheet can thus be significantly modified
Reflections on Sam Harris' "Free Will"

Directory of Open Access Journals (Sweden)

Daniel C. Dennett

2017-12-01

Full Text Available In his book Free Will Sam Harris tries to persuade us to abandon the morally pernicious idea of free will. The following contribution articulates and defends a more sophisticated model of free will that is not only consistent with neuroscience and introspection but also grounds a variety of responsibility that justifies both praise and blame, reward and punishment. This begins with the long lasting parting of opinion between compatibilists (who argue that free will can live comfortably with determinism and incompatibilists (who deny this. While Harris dismisses compatibilism as a form of theology, this article aims at showing that Harris has underestimated and misinterpreted compatibilism and at defending a more sophisticated version of compatibilism that is imprevious to Harris’ criticism.
Vlasov-Maxwell equilibrium solutions for Harris sheet magnetic field with Kappa velocity distribution

International Nuclear Information System (INIS)

Fu, W.-Z.; Hau, L.-N.

2005-01-01

An exact solution of the steady-state, one-dimensional Vlasov-Maxwell equations for a plasma current sheet with oppositely directed magnetic field was found by Harris in 1962. The so-called Harris magnetic field model assumes Maxwellian velocity distributions for oppositely drifting ions and electrons and has been widely used for plasma stability studies. This paper extends Harris solutions by using more general κ distribution functions that incorporate Maxwellian distribution in the limit of κ→∞. A new functional form for the plasma pressure as a function of the magnetic vector potential p(A) is found and the magnetic field is a modified tanh z function. In the extended solutions the effective temperature is no longer spatially uniform like in the Harris model and the thickness of the current layer decreases with decreasing κ
General formulation for magnetohydrodynamic wave propagation, fire-hose, and mirror instabilities in Harris-type current sheets

International Nuclear Information System (INIS)

Hau, L.-N.; Lai, Y.-T.

2013-01-01

Harris-type current sheets with the magnetic field model of B-vector=B x (z)x-caret+B y (z)y-caret have many important applications to space, astrophysical, and laboratory plasmas for which the temperature or pressure usually exhibits the gyrotropic form of p↔=p ∥ b-caretb-caret+p ⊥ (I↔−b-caretb-caret). Here, p ∥ and p ⊥ are, respectively, to be the pressure component along and perpendicular to the local magnetic field, b-caret=B-vector/B. This study presents the general formulation for magnetohydrodynamic (MHD) wave propagation, fire-hose, and mirror instabilities in general Harris-type current sheets. The wave equations are expressed in terms of the four MHD characteristic speeds of fast, intermediate, slow, and cusp waves, and in the local (k ∥ ,k ⊥ ,z) coordinates. Here, k ∥ and k ⊥ are, respectively, to be the wave vector along and perpendicular to the local magnetic field. The parameter regimes for the existence of discrete and resonant modes are identified, which may become unstable at the local fire-hose and mirror instability thresholds. Numerical solutions for discrete eigenmodes are shown for stable and unstable cases. The results have important implications for the anomalous heating and stability of thin current sheets.
3D reconnection due to oblique modes: a simulation of Harris current sheets

Directory of Open Access Journals (Sweden)

G. Lapenta

2000-01-01

Full Text Available Simulations in three dimensions of a Harris current sheet with mass ratio, mi/me = 180, and current sheet thickness, pi/L = 0.5, suggest the existence of a linearly unstable oblique mode, which is independent from either the drift-kink or the tearing instability. The new oblique mode causes reconnection independently from the tearing mode. During the initial linear stage, the system is unstable to the tearing mode and the drift kink mode, with growth rates that are accurately described by existing linear theories. How-ever, oblique modes are also linearly unstable, but with smaller growth rates than either the tearing or the drift-kink mode. The non-linear stage is first reached by the drift-kink mode, which alters the initial equilibrium and leads to a change in the growth rates of the tearing and oblique modes. In the non-linear stage, the resulting changes in magnetic topology are incompatible with a pure tearing mode. The oblique mode is shown to introduce a helical structure into the magnetic field lines.
Forced tearing of ductile and brittle thin sheets.

Science.gov (United States)

Tallinen, T; Mahadevan, L

2011-12-09

Tearing a thin sheet by forcing a rigid object through it leads to complex crack morphologies; a single oscillatory crack arises when a tool is driven laterally through a brittle sheet, while two diverging cracks and a series of concertinalike folds forms when a tool is forced laterally through a ductile sheet. On the other hand, forcing an object perpendicularly through the sheet leads to radial petallike tears in both ductile and brittle materials. To understand these different regimes we use a combination of experiments, simulations, and simple theories. In particular, we describe the transition from brittle oscillatory tearing via a single crack to ductile concertina tearing with two tears by deriving laws that describe the crack paths and wavelength of the concertina folds and provide a simple phase diagram for the morphologies in terms of the material properties of the sheet and the relative size of the tool.
A two-fluid study of oblique tearing modes in a force-free current sheet

Energy Technology Data Exchange (ETDEWEB)

Akçay, Cihan, E-mail: akcay@lanl.gov; Daughton, William [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States); Lukin, Vyacheslav S. [National Science Foundation, Arlington, Virginia 22230 (United States); Liu, Yi-Hsin [NASA Goddard Space Flight Center, Greenbelt, Maryland 20771 (United States)

2016-01-15

Kinetic simulations have demonstrated that three-dimensional reconnection in collisionless regimes proceeds through the formation and interaction of magnetic flux ropes, which are generated due to the growth of tearing instabilities at multiple resonance surfaces. Since kinetic simulations are intrinsically expensive, it is desirable to explore the feasibility of reduced two-fluid models to capture this complex evolution, particularly, in the strong guide field regime, where two-fluid models are better justified. With this goal in mind, this paper compares the evolution of the collisionless tearing instability in a force-free current sheet with a two-fluid model and fully kinetic simulations. Our results indicate that the most unstable modes are oblique for guide fields larger than the reconnecting field, in agreement with the kinetic results. The standard two-fluid tearing theory is extended to address the tearing instability at oblique angles. The resulting theory yields a flat oblique spectrum and underestimates the growth of oblique modes in a similar manner to kinetic theory relative to kinetic simulations.
On the instability of a quasiequilibrium current sheet and the onset of impulsive bursty reconnection

International Nuclear Information System (INIS)

Skender, Marina; Lapenta, Giovanni

2010-01-01

A two-dimensional reconnecting current sheet is studied numerically in the magnetohydrodynamic approach. Different simulation setups are employed in order to follow the evolution of the formed current sheet in diverse configurations: two types of initial equilibria, Harris and force-free, two types of boundary conditions, periodic and open, with uniform and nonuniform grid set, respectively. All the simulated cases are found to exhibit qualitatively the same behavior in which a current sheet evolves slowly through a series of quasiequilibria; eventually it fragments and enters a phase of fast impulsive bursty reconnection. In order to gain more insight on the nature and characteristics of the instability taking place, physical characteristics of the simulated current sheet are related to its geometrical properties. At the adopted Lundquist number of S=10 4 and Reynolds number R=10 4 , the ratio of the length to width (aspect ratio) of the formed current sheet is observed to increase slowly in time up to a maximum value at which it fragments. Moreover, additional turbulence applied to the system is shown to exhibit the same qualitative steps, but with the sooner onset of the fragmentation and at smaller aspect ratio.
A MODEL FOR THE ELECTRICALLY CHARGED CURRENT SHEET OF A PULSAR

Energy Technology Data Exchange (ETDEWEB)

DeVore, C. R.; Antiochos, S. K.; Black, C. E. [Heliophysics Science Division, NASA Goddard Space Flight Center, 8800 Greenbelt Road, Greenbelt, MD 20771 (United States); Harding, A. K.; Kalapotharakos, C.; Kazanas, D.; Timokhin, A. N., E-mail: c.richard.devore@nasa.gov [Astrophysics Science Division, NASA Goddard Space Flight Center, 8800 Greenbelt Road, Greenbelt, MD 20771 (United States)

2015-03-10

Global-scale solutions for the magnetosphere of a pulsar consist of a region of low-lying, closed magnetic field near the star, bounded by opposite-polarity regions of open magnetic field along which the pulsar wind flows into space. Separating these open-field regions is a magnetic discontinuity—an electric current sheet—consisting of generally nonneutral plasma. We have developed a self-consistent model for the internal equilibrium structure of the sheet by generalizing the charge-neutral Vlasov/Maxwell equilibria of Harris and Hoh to allow for net electric charge. The resulting equations for the electromagnetic field are solved analytically and numerically. Our results show that the internal thermal pressure needed to establish equilibrium force balance, and the associated effective current-sheet thickness and magnetization, can differ by orders of magnitude from the Harris/Hoh charge-neutral limit. The new model provides a starting point for kinetic or fluid investigations of instabilities that can cause magnetic reconnection and flaring in pulsar magnetospheres.
Particle-in-cell simulations of collisionless magnetic reconnection with a non-uniform guide field

International Nuclear Information System (INIS)

Wilson, F.; Neukirch, T.; Harrison, M. G.; Hesse, M.; Stark, C. R.

2016-01-01

Results are presented of a first study of collisionless magnetic reconnection starting from a recently found exact nonlinear force-free Vlasov–Maxwell equilibrium. The initial state has a Harris sheet magnetic field profile in one direction and a non-uniform guide field in a second direction, resulting in a spatially constant magnetic field strength as well as a constant initial plasma density and plasma pressure. It is found that the reconnection process initially resembles guide field reconnection, but that a gradual transition to anti-parallel reconnection happens as the system evolves. The time evolution of a number of plasma parameters is investigated, and the results are compared with simulations starting from a Harris sheet equilibrium and a Harris sheet plus constant guide field equilibrium.
Electrodynamic forces and plasma conductivity inside the current sheet

International Nuclear Information System (INIS)

Bogdanov, S.Yu.; Frank, A.G.; Markov, V.S.

1985-01-01

The process of accumulation and explosive release of magnetic energy was studied in a current sheet of plasma of a high-current linear discharge. The distribution of current density and of electrodynamic forces were measured and the time evolution of these quantities was determined. The evolution of the plasma conductivity was also obtained. The measured and calculated electrodynamic forces may explain the plasma acceleration up to the velocities about 3x10 4 m/s only near the sheet edges. (D.Gy.)
THE FREE-FALL TIME OF FINITE SHEETS AND FILAMENTS

Energy Technology Data Exchange (ETDEWEB)

Toala, Jesus A. [Currently at Instituto de Astrofisica de Andalucia, CSIC, E-1808, Granada (Spain); Vazquez-Semadeni, Enrique; Gomez, Gilberto C. [Centro de Radioastronomia y Astrofisica, Universidad Nacional Autonoma de Mexico, Campus Morelia Apartado Postal 3-72, 58090 Morelia, Michoacan (Mexico)

2012-01-10

Molecular clouds often exhibit filamentary or sheet-like shapes. We compute the free-fall time ({tau}{sub ff}) for finite, uniform, self-gravitating circular sheets and filamentary clouds of small but finite thickness, so that their volume density {rho} can still be defined. We find that, for thin sheets, the free-fall time is larger than that of a uniform sphere with the same volume density by a factor proportional to {radical}A, where the aspect ratio A is given by A = R/h, R being the sheet's radius and h is its thickness. For filamentary clouds, the aspect ratio is defined as A=L/R, where L is the filament's half-length and R is its (small) radius, and the modification factor is more complicated, although in the limit of large A it again reduces to nearly {radical}A. We propose that our result for filamentary shapes naturally explains the ubiquitous configuration of clumps fed by filaments observed in the densest structures of molecular clouds. Also, the longer free-fall times for non-spherical geometries in general may contribute toward partially alleviating the 'star formation conundrum', namely, the star formation rate in the Galaxy appears to be proceeding in a timescale much larger than the total molecular mass in the Galaxy divided by its typical free-fall time. If molecular clouds are in general formed by thin sheets and long filaments, then their relevant free-fall time may have been systematically underestimated, possibly by factors of up to one order of magnitude.
THE FREE-FALL TIME OF FINITE SHEETS AND FILAMENTS

International Nuclear Information System (INIS)

Toalá, Jesús A.; Vázquez-Semadeni, Enrique; Gómez, Gilberto C.

2012-01-01

Molecular clouds often exhibit filamentary or sheet-like shapes. We compute the free-fall time (τ ff ) for finite, uniform, self-gravitating circular sheets and filamentary clouds of small but finite thickness, so that their volume density ρ can still be defined. We find that, for thin sheets, the free-fall time is larger than that of a uniform sphere with the same volume density by a factor proportional to √A, where the aspect ratio A is given by A = R/h, R being the sheet's radius and h is its thickness. For filamentary clouds, the aspect ratio is defined as A=L/R, where L is the filament's half-length and R is its (small) radius, and the modification factor is more complicated, although in the limit of large A it again reduces to nearly √A. We propose that our result for filamentary shapes naturally explains the ubiquitous configuration of clumps fed by filaments observed in the densest structures of molecular clouds. Also, the longer free-fall times for non-spherical geometries in general may contribute toward partially alleviating the 'star formation conundrum', namely, the star formation rate in the Galaxy appears to be proceeding in a timescale much larger than the total molecular mass in the Galaxy divided by its typical free-fall time. If molecular clouds are in general formed by thin sheets and long filaments, then their relevant free-fall time may have been systematically underestimated, possibly by factors of up to one order of magnitude.
Rheological and secondary structural characterization of rice flour-zein composites for noodles slit from gluten-free sheeted dough.

Science.gov (United States)

Jeong, Sungmin; Kim, Hee Won; Lee, Suyong

2017-04-15

Rice flour-zein composites in a hydrated viscoelastic state were utilized to compensate for the role of wheat gluten in gluten-free sheeted dough. The use of zein above its glass transition temperature was able to form a viscoelastic protein network of non-wheat dough with rice flour. The mixing stability and development time of the rice dough were positively increased with increasing levels of zein. The protein secondary structural analysis by FTIR spectroscopy demonstrated that the rice doughs with high levels of zein showed significant increases in β-sheet structures whose intensity was almost doubled by the use of 10% zein. The use of zein at more than 5% (w/w) successfully produced gluten-free dough sheets that could be slit into thin and long noodle strands. In addition, the composites were effective in improving the rheological characteristics of gluten-free noodle strands by increasing their maximum force to extension, compared to wheat-based noodles. Copyright © 2016 Elsevier Ltd. All rights reserved.
Nonlinear dynamics of thin current sheets

International Nuclear Information System (INIS)

Daughton, William

2002-01-01

Observations indicate that the current sheet in the Earth's geomagnetic tail may compress to a thickness comparable to an ion gyro-radius prior to substorm onset. In recent years, there has been considerable controversy regarding the kinetic stability of these thin structures. In particular, the growth rate of the kink instability and its relevance to magnetotail dynamics is still being debated. In this work, a series of fully kinetic particle-in-cell simulations are performed for a thin Harris sheet. The ion to electron mass ratio is varied between m i /m e =4→400 and careful comparisons are made with a formally exact approach to the linear Vlasov theory. At low mass ratio m i /m e <64, the simulations are in excellent agreement with the linear theory, but at high mass ratio the kink instability is observed to grow more rapidly in the kinetic simulations than predicted by theory. The resolution to this apparent discrepancy involves the lower hybrid instability which is active on the edge of the sheet and rapidly produces nonlinear modifications to the initial equilibrium. The nature of this nonlinear deformation is characterized and a simple model is proposed to explain the physics. After the growth and saturation of the lower hybrid fluctuations, the deformed current sheet is similar in structure to a Harris equilibrium with an additional background population. This may explain the large growth rate of the kink instability at later times, since this type of modification to the Harris sheet has been shown to greatly enhance the growth rate of the kink mode
Experimental Investigation of the Neutral sheet Profile During Magnetic Reconnection

International Nuclear Information System (INIS)

Trintchouk, F.; Ji, H.; Yamada, M.; Kulsrud, R.; Hsu, S.; Carter, T.

1999-01-01

During magnetic reconnection, a ''neutral sheet'' current is induced, heating the plasma. The resultant plasma thermal pressure forms a stationary equilibrium with the opposing magnetic fields. The reconnection layer profile holds significant clues about the physical mechanisms which control reconnection. On the Magnetic Reconnection Experiment [M. Yamada et al., Phys. Plasmas 4, 1936 (1997)], a quasi steady-state and axisymmetric neutral sheet profile has been measured precisely using a magnetic probe array with spatial resolution equal to one quarter of the ion gyro-radius. It was found that the reconnecting field profile fits well with a Harris-type profile [E. G. Harris, Il Nuovo Cimento 23, 115 (1962)], B(x) approximately tanh(x/delta). This agreement is remarkable since the Harris theory does not take into account reconnection and associated electric fields and dissipation. An explanation for this agreement is presented. The sheet thickness delta is found to be approximately 0.4 times the ion skin depth, which agrees with a generalized Harris theory incorporating non-isothermal electron and ion temperatures and finite electric field. The detailed study of additional local features of the reconnection region is also presented
Explosive force of primacord grid forms large sheet metal parts

Science.gov (United States)

1966-01-01

Primacord which is woven through fish netting in a grid pattern is used for explosive forming of large sheet metal parts. The explosive force generated by the primacord detonation is uniformly distributed over the entire surface of the sheet metal workpiece.
Numerical simulation for the magnetic force distribution in electromagnetic forming of small size flat sheet

Science.gov (United States)

Chen, Xiaowei; Wang, Wenping; Wan, Min

2013-12-01

It is essential to calculate magnetic force in the process of studying electromagnetic flat sheet forming. Calculating magnetic force is the basis of analyzing the sheet deformation and optimizing technical parameters. Magnetic force distribution on the sheet can be obtained by numerical simulation of electromagnetic field. In contrast to other computing methods, the method of numerical simulation has some significant advantages, such as higher calculation accuracy, easier using and other advantages. In this paper, in order to study of magnetic force distribution on the small size flat sheet in electromagnetic forming when flat round spiral coil, flat rectangular spiral coil and uniform pressure coil are adopted, the 3D finite element models are established by software ANSYS/EMAG. The magnetic force distribution on the sheet are analyzed when the plane geometries of sheet are equal or less than the coil geometries under fixed discharge impulse. The results showed that when the physical dimensions of sheet are less than the corresponding dimensions of the coil, the variation of induced current channel width on the sheet will cause induced current crowding effect that seriously influence the magnetic force distribution, and the degree of inhomogeneity of magnetic force distribution is increase nearly linearly with the variation of induced current channel width; the small size uniform pressure coil will produce approximately uniform magnetic force distribution on the sheet, but the coil is easy to early failure; the desirable magnetic force distribution can be achieved when the unilateral placed flat rectangular spiral coil is adopted, and this program can be take as preferred one, because the longevity of flat rectangular spiral coil is longer than the working life of small size uniform pressure coil.
The battle of Old Harry; La bataille d'Old Harry

Energy Technology Data Exchange (ETDEWEB)

Contant, Alain

2011-04-15

In 1998, both Quebec and Newfoundland and Labrador carried out independent seismic prospecting in the Gulf of St Lawrence. This resulted in the discovery of an oil and natural gas deposit. The government of Quebec imposed a moratorium until 2012 on hydrocarbon exploration and exploitation, because of possible damage to blue whales and the ecosystems of the region. The Newfoundland and Labrador government decided to continue the exploration and in October 2010 authorised a Halifax company, Corridor Resources, to proceed with seismic work near the Old Harry deposit. Quebec reacted because of two main concerns, the effect on the environment and the risk of Newfoundland overstepping into Quebec hydrocarbon limits. By pursuing hydrocarbon exploitation, Quebec could create employment and improve its commercial balance, but it could also end up in competition with its own hydroelectricity. Old Harry will force our society to question its vision of energy, economic viability and sustainable development.

Harry Potteri ABC

Index Scriptorium Estoniae

2002-01-01

Tutvustavat näitlejate ja nende rollide juurde J.K. Rowling'u Harry Potteri lugude teises filmis "Harry Potter ja saladuste kamber" ("Harry Potter and the Chamber of Secrets") : režissöör Chris Columbus. Filmi esilinastumisest New Yorgis
Production of free radical by magnetized sheet plasma with vertical gas-flow

International Nuclear Information System (INIS)

Tonegawa, Akira; Takatori, Masahiko; Kawamura, Kazutaka

1995-01-01

Free radicals play an important role in plasma processing, environment problem, and space plasma and so on because of their outstanding physical properties. Although much work has been done on the free radicals in the reactive plasma, very little is known about the production mechanism of the free radicals against various plasma parameters. To overcome this problem, we have proposed to do a new system of a magnetized sheet plasma with vertical gas-flow. The sheet plasma is a special type of strongly magnetized highly ionized slab plasma. This system is controlled to the parameters of radicals and plasma independently. Therefore, it is possible to make a quantitative analysis of free radicals as the simple one. In this paper, we describe the magnetized sheet plasma with vertical gas-flow system and report the preliminary results of production of the free radical. In particular, we show to produce and control the OH free radical which has been the most commonly studied combustion species
Numerical calculation of the Casimir forces between a gold sphere and a nanocomposite sheet

International Nuclear Information System (INIS)

Inui, Norio; Miura, Kouji; Akamatsu, Kensuke; Ishikawa, Makoto

2010-01-01

The repulsive Casimir force is expected as a force which enables to levitate small objects such as machine parts used in Micro Electro Mechanical Systems (MEMS), and superlubricity in MEMS may be realized by this levitation. We study the Casimir force between a gold sphere and a nanocomposite sheet containing many nickel nanoparticles. In particular, we focus on the dependence of the Casimir force on the separation between the gold sphere and the surface of the nanocomposite sheet. The Casimir force changes from the attractive force to the repulsive force as the separation increases. The strength of the repulsive force is, however, too small to levitate MEMS parts.
Numerical calculation of the Casimir forces between a gold sphere and a nanocomposite sheet

Energy Technology Data Exchange (ETDEWEB)

Inui, Norio; Miura, Kouji; Akamatsu, Kensuke; Ishikawa, Makoto, E-mail: inui@eng.u-hyogo.ac.j, E-mail: kmiura@auecc.aichi-edu.ac.j, E-mail: akamatsu@center.konan-u.ac.j, E-mail: makoishi@auecc.aichi-edu.ac.j

2010-11-01

The repulsive Casimir force is expected as a force which enables to levitate small objects such as machine parts used in Micro Electro Mechanical Systems (MEMS), and superlubricity in MEMS may be realized by this levitation. We study the Casimir force between a gold sphere and a nanocomposite sheet containing many nickel nanoparticles. In particular, we focus on the dependence of the Casimir force on the separation between the gold sphere and the surface of the nanocomposite sheet. The Casimir force changes from the attractive force to the repulsive force as the separation increases. The strength of the repulsive force is, however, too small to levitate MEMS parts.
Fabrication and microwave shielding properties of free standing polyaniline-carbon fiber thin sheets

International Nuclear Information System (INIS)

Joon, Seema; Kumar, Rakesh; Singh, Avanish Pratap; Shukla, Rajni; Dhawan, S.K.

2015-01-01

Attempt has been made to synthesize polyaniline-carbon fiber (PANI-CF) composite via in-situ emulsion polymerization using β-naphthalene sulphonic acid (NSA) which acts as both surfactant as well as dopant. Free standing PANI-CF thin sheets are prepared which have electrical conductivity ∼1.02 S/cm with improved mechanical strength and thermal stability. The scanning electron microscopy is used to study the surface morphology of the composites. Structural characterization is done by using XRD. The dielectric attributes (ε* = ε′ − iε″) of PANI-CF sheets are calculated using experimental S parameters (S 11 , S 12 ) by Nicolson Ross Wier equations. It has been demonstrated that these sheets show maximum shielding effectiveness (SE) of 31.9 dB at 12.4 GHz frequency at a thickness of 1.5 mm. Free standing PANI-CF sheets so prepared have a potential for X-band microwave absorber application. - Highlights: • Free standing polyaniline-carbon fiber thin sheets fabricated for EMI shielding. • The mechanical strength of sheets improves with phenolic resin loading. • The dielectric parameters were calculated by Nicholson Ross Wier equations. • Sheets (1.5 mm thickness) demonstrate SE of 31.9 dB at 12.4 GHz frequency. • Sheets find potential application for X-band microwave absorption
Compression deformation behaviors of sheet metals at various clearances and side forces

Directory of Open Access Journals (Sweden)

Zhan Mei

2015-01-01

Full Text Available Modeling sheet metal forming operations requires understanding of plastic behaviors of sheet metals along non-proportional strain paths. The plastic behavior under reversed uniaxial loading is of particular interest because of its simplicity of interpretation and its application to material elements drawn over a die radius and underwent repeated bending. However, the attainable strain is limited by failures, such as buckling and in-plane deformation, dependent on clearances and side forces. In this study, a finite element (FE model was established for the compression process of sheet specimens, to probe the deformation behavior. The results show that: With the decrease of the clearance from a very large value to a very small value, four defects modes, including plastic t-buckling, micro-bending, w-buckling, and in-plane compression deformation will occur. With the increase of the side force from a very small value to a very large value, plastic t-buckling, w-buckling, uniform deformation, and in-plane compression will occur. The difference in deformation behaviors under these two parameters indicates that the successful compression process without failures for sheet specimens only can be carried out under a reasonable side force.
Reconsidering evolved sex differences in jealousy: comment on Harris (2003).

Science.gov (United States)

Sagarin, Brad J

2005-01-01

In a recent article, Harris (2003) concluded that the data do not support the existence of evolved sex differences in jealousy. Harris' review correctly identifies fatal flaws in three lines of evidence (spousal abuse, homicide, morbid jealousy), but her criticism of two other lines of evidence (self-report responses, psychophysiological measures) is based, in part, on a mischaracterization of the evolutionary psychological theory and a misunderstanding of the empirical implications of the theory. When interpreted according to the correct criterion (i.e., an interaction between sex and infidelity type), self-report studies (both forced-choice and non-forced choice) offer strong support for the existence of sex differences in jealousy. Psychophysiological data also offer some support, although these data are weakened by validity-related concerns. In addition, some refutational evidence cited by Harris (responses to real infidelity, responses under cognitive load) actually does not refute the theory. An integrative model that describes how jealousy might result from the interaction of sociocultural variables and evolved sex differences and suggestions for future research directions are discussed.
Bifurcation of Jovian magnetotail current sheet

Directory of Open Access Journals (Sweden)

P. L. Israelevich

2006-07-01

Full Text Available Multiple crossings of the magnetotail current sheet by a single spacecraft give the possibility to distinguish between two types of electric current density distribution: single-peaked (Harris type current layer and double-peaked (bifurcated current sheet. Magnetic field measurements in the Jovian magnetic tail by Voyager-2 reveal bifurcation of the tail current sheet. The electric current density possesses a minimum at the point of the Bx-component reversal and two maxima at the distance where the magnetic field strength reaches 50% of its value in the tail lobe.
Patterns through elastic instabilities, from thin sheets to twisted ribbons

Science.gov (United States)

Damman, Pascal

Sheets embedded in a given shape by external forces store the exerted work in elastic deformations. For pure tensile forces, the work is stored as stretching energy. When the forces are compressive, several ways to store the exerted work, combining stretching and bending deformations can be explored. For large deflections, the ratio of bending, Eh3ζ2 /L4 and stretching, Ehζ4 /L4 energies, suggests that strain-free solutions should be favored for thin sheets, provided ζ2 >>h2 (where E , ζ , Land h are the elastic modulus, the deflection, a characteristic sheet size and its thickness). For uniaxially constrained sheets deriving from the Elastica, strain-free solutions are obvious, i.e., buckles, folds or wrinkles grow to absorb the stress of compression. In contrast, crumpled sheets exhibit ``origami-like'' solutions usually described as an assembly of flat polygonal facets delimitated by ridges focusing strains are observed. This type of solutions is particularly interesting since a faceted morphology is isometric to the undeformed sheet, except at those narrow ridges. In some cases however, the geometric constraints imposed by the external forces do not allow solutions with negligible strain in the deformed state. For instance, considering a circular sheet on a small drop, so thin that bending becomes negligible, i.e., Eh3 / γL2 geometry and a competition between various energy terms, involving stretching and bending modes.
Bifurcation of Jovian magnetotail current sheet

Directory of Open Access Journals (Sweden)

P. L. Israelevich

2006-07-01

Full Text Available Multiple crossings of the magnetotail current sheet by a single spacecraft give the possibility to distinguish between two types of electric current density distribution: single-peaked (Harris type current layer and double-peaked (bifurcated current sheet. Magnetic field measurements in the Jovian magnetic tail by Voyager-2 reveal bifurcation of the tail current sheet. The electric current density possesses a minimum at the point of the B_x-component reversal and two maxima at the distance where the magnetic field strength reaches 50% of its value in the tail lobe.
Harry Potter and the Chamber of Commerce: J.K. Rowling’s Pottermore.com as the extension of the Harry Potter brand in a digital context

OpenAIRE

Colbjørnsen, Terje

2012-01-01

With the launch of the website Pottermore.com, author J.K Rowling has extended the Harry Potter brand into the digital realm. After seven books and eight films, the Potter saga continues with an online multimedia experience and ebook versions of the Harry Potter books. The site, which is free to join and use, opened for beta users in August 2011, and subsequently, following a number of postponements, was launched to the general public in March 2012. Pottermore serves three main functions: 1) ...
The Harry Potter Phenomenon.

Science.gov (United States)

Comber, Barbara; Nixon, Helen

2001-01-01

Notes that while many adults seem to be rejoicing in the fact that the Harry Potter books have brought the pleasures of book reading to a new generation of young readers, Harry Potter is also entering the realm of popular media culture. Discusses and analyses the effect Harry Potter books have on children and on society. (SG)
EXPERIMENTAL TESTING OF DRAW-BEAD RESTRAINING FORCE IN SHEET METAL FORMING

Institute of Scientific and Technical Information of China (English)

J.H. Yang; J. Chen; D.N. He; X. Y. Ruan

2003-01-01

Due to complexities of draw-bead restraining force calculated according to theory anddepending on sheet metal forming properties experiment testing system, a simplifiedmethod to calculate draw-bead restraining force is put forward by experimental methodin cup-shaped drawing process. The experimental results were compared with numer-ical results and proved agreement. It shows the method is effective.
Harry Potteri looja uus rekord

Index Scriptorium Estoniae

2005-01-01

J. K. Rowlingult on ilmumas Harry Potteri lugude kuues köide "Harry Potter ja segavereline prints". Vaata ka: Postimees, 11. juuli, lk. 17, pealkirjaga: "Kuuendat Harry Potterit saab osta laupäevast" ; Postimees, 14. juuli, lk. 17, pealkirjaga ""Harry Potter" tuleb Tallinnas öömüüki" ; SL Õhtuleht, 15. juuli, lk. 12, pealkirjaga "Täna öösel saab osta Potteri uue raamatu"
Harris functional and related methods for calculating total energies in density-functional theory

International Nuclear Information System (INIS)

Averill, F.W.; Painter, G.S.

1990-01-01

The simplified energy functional of Harris has given results of useful accuracy for systems well outside the limits of weakly interacting fragments for which the method was originally proposed. In the present study, we discuss the source of the frequent good agreement of the Harris energy with full Kohn-Sham self-consistent results. A procedure is described for extending the applicability of the scheme to more strongly interacting systems by going beyond the frozen-atom fragment approximation. A gradient-force expression is derived, based on the Harris functional, which accounts for errors in the fragment charge representation. Results are presented for some diatomic molecules, illustrating the points of this study
Harry Potter en latin

OpenAIRE

Elfassi, Jacques

2012-01-01

En 2003 et en 2007 ont été publiées les traductions latines des deux premiers tomes de Harry Potter de Joanne Kathleen Rowling : Harry Potter à l’école des sorciers et Harry Potter et la chambre des secrets . Sans doute ne faut-il pas accorder à ces traductions une importance disproportionnée. Ce ne sont certainement pas elles qui ont créé le succès de Harry Potter, elles ne font que l’accompagner ; et bien qu’on ne puisse pas les réduire à cette seule caractéristique, ce sont aussi des produ...
Traction forces exerted by epithelial cell sheets

International Nuclear Information System (INIS)

Saez, A; Anon, E; Ghibaudo, M; Di Meglio, J-M; Hersen, P; Ladoux, B; Du Roure, O; Silberzan, P; Buguin, A

2010-01-01

Whereas the adhesion and migration of individual cells have been well described in terms of physical forces, the mechanics of multicellular assemblies is still poorly understood. Here, we study the behavior of epithelial cells cultured on microfabricated substrates designed to measure cell-to-substrate interactions. These substrates are covered by a dense array of flexible micropillars whose deflection enables us to measure traction forces. They are obtained by lithography and soft replica molding. The pillar deflection is measured by video microscopy and images are analyzed with home-made multiple particle tracking software. First, we have characterized the temporal and spatial distributions of traction forces of cellular assemblies of various sizes. The mechanical force balance within epithelial cell sheets shows that the forces exerted by neighboring cells strongly depend on their relative position in the monolayer: the largest deformations are always localized at the edge of the islands of cells in the active areas of cell protrusions. The average traction stress rapidly decreases from its maximum value at the edge but remains much larger than the inherent noise due to the force resolution of our pillar tracking software, indicating an important mechanical activity inside epithelial cell islands. Moreover, these traction forces vary linearly with the rigidity of the substrate over about two decades, suggesting that cells exert a given amount of deformation rather than a force. Finally, we engineer micropatterned substrates supporting pillars with anisotropic stiffness. On such substrates cellular growth is aligned with respect to the stiffest direction in correlation with the magnitude of the applied traction forces.
EXPERIMENTAL TESTING OF DRAW—BEAD RESTRAINING FORCE IN SHEET METAL FORMING

Institute of Scientific and Technical Information of China (English)

J.H.Yang; J.Chen; 等

2003-01-01

Due to complexities of draw-bead restraining force calculated according to theory and depending on sheet metal forming properties experiment testing system,a simplified method to calculate draw-bead restraining force is put forward by experimental method in cup-shaped drawing process.The experimental results were compared with numer-ical results and proved agreement.It shows the method is effective.
Warm Deep Drawing of Rectangular Parts of AZ31 Magnesium Alloy Sheet Adopting Variable Blank Holder Force

International Nuclear Information System (INIS)

Peng Yinghong; Chang Qunfeng; Li Dayong; Zeng Xiaoqin

2007-01-01

AZ31 magnesium alloy sheet with good shape and formability is fabricated by warm cross rolling. Uniaxial tensile tests are conducted using a Gleeble 3500 thermal - mechanical simulator, and the mechanical properties of AZ31 magnesium alloy sheet are analyzed. A warm deep drawing process of square part is also simulated by the finite element method. The influences of blank holder force on the formability are numerically investigated. A double-action hydraulic press that can realize adjustable blank holder forces is developed and its working principle and control system are introduced. Some warm deep drawing experiments of square parts of AZ31 magnesium alloy sheet are also performed. Different variation schemes of the blank holder force with the stroke of the punch are tested, and the experiment results are compared. Results show that the suitable blank holder force variation scheme is a ladder curve with the punch stroke. Adopting the variable blank holder force technique can improve 13.2% of the drawing depth of square parts of AZ31 magnesium alloy sheet
Energized Oxygen : Speiser Current Sheet Bifurcation

Science.gov (United States)

George, D. E.; Jahn, J. M.

2017-12-01

A single population of energized Oxygen (O+) is shown to produce a cross-tail bifurcated current sheet in 2.5D PIC simulations of the magnetotail without the influence of magnetic reconnection. Treatment of oxygen in simulations of space plasmas, specifically a magnetotail current sheet, has been limited to thermal energies despite observations of and mechanisms which explain energized ions. We performed simulations of a homogeneous oxygen background, that has been energized in a physically appropriate manner, to study the behavior of current sheets and magnetic reconnection, specifically their bifurcation. This work uses a 2.5D explicit Particle-In-a-Cell (PIC) code to investigate the dynamics of energized heavy ions as they stream Dawn-to-Dusk in the magnetotail current sheet. We present a simulation study dealing with the response of a current sheet system to energized oxygen ions. We establish a, well known and studied, 2-species GEM Challenge Harris current sheet as a starting point. This system is known to eventually evolve and produce magnetic reconnection upon thinning of the current sheet. We added a uniform distribution of thermal O+ to the background. This 3-species system is also known to eventually evolve and produce magnetic reconnection. We add one additional variable to the system by providing an initial duskward velocity to energize the O+. We also traced individual particle motion within the PIC simulation. Three main results are shown. First, energized dawn- dusk streaming ions are clearly seen to exhibit sustained Speiser motion. Second, a single population of heavy ions clearly produces a stable bifurcated current sheet. Third, magnetic reconnection is not required to produce the bifurcated current sheet. Finally a bifurcated current sheet is compatible with the Harris current sheet model. This work is the first step in a series of investigations aimed at studying the effects of energized heavy ions on magnetic reconnection. This work differs

An extended Harry Dym hierarchy

International Nuclear Information System (INIS)

Ma Wenxiu

2010-01-01

An extended Harry Dym hierarchy is constructed by using eigenfunctions and adjoint eigenfunctions of the spectral problems of the Harry Dym hierarchy associated with the pseudo-differential operator L = u∂ + u 0 + u 1 ∂ -1 + .... The corresponding Lax presentation possesses a self-consistent source involving squared eigenfunctions. The resulting extended Harry Dym hierarchy is reduced to the Harry Dym hierarchy with self-consistent sources under the n-reduction, L n = (L n ) ≥2 , and the k-constrained Harry Dym hierarchy under the k-constraint, L k = (L k ) ≥2 + Σ N i=1 q i ∂ -1 r i ∂ 2 . A few particular examples are computed, together with their Lax pairs.
Self-inhibiting growth of the Greenland Ice Sheet

DEFF Research Database (Denmark)

Langen, Peter Lang; Solgaard, Anne Munck; Hvidberg, Christine Schøtt

2012-01-01

The build-up of the Greenland Ice Sheet (GrIS) from ice-free conditions is studied in an ice sheet model (ISM) driven by fields from an atmospheric general circulation model (GCM) to demonstrate the importance of coupling between the two components. Experiments where the two are coupled off-line...... are augmented by one where an intermediate ice sheet configuration is coupled back to the GCM. Forcing the ISM with GCM fields corresponding to the ice-free state leads to extensive regrowth which, however, is halted when the intermediate recoupling step is included. This inhibition of further growth is due...... to a Föhn effect of moist air parcels being lifted over the intermediate ice sheet and arriving in the low-lying Greenland interior with high temperatures. This demonstrates that two-way coupling between the atmosphere and the ice sheet is essential for understanding the dynamics and that large scale...
Compression deformation behaviors of sheet metals at various clearances and side forces

OpenAIRE

Zhan Mei; Wang Xianxian; Cao Jian; Yang He

2015-01-01

Modeling sheet metal forming operations requires understanding of plastic behaviors of sheet metals along non-proportional strain paths. The plastic behavior under reversed uniaxial loading is of particular interest because of its simplicity of interpretation and its application to material elements drawn over a die radius and underwent repeated bending. However, the attainable strain is limited by failures, such as buckling and in-plane deformation, dependent on clearances and side forces. I...
Formation of sub-ion scale filamentary force-free structures in the vicinity of reconnection region

International Nuclear Information System (INIS)

Zelenyi, L M; Artemyev, A V; Petrukovich, A A; Frank, A G; Nakamura, R

2016-01-01

In this paper we review the results of spacecraft observations of current sheets (CSs) of sub-ion spatial scales in the Earth’s magnetotail as well as experiments with these structures in laboratory devices. We demonstrate that such sub-ion CSs having a thickness less than the ion gyroradius are usually formed in the vicinity of the magnetic reconnection region and are supported by strong electron currents flowing along magnetic field lines. The magnetic field configuration of sub-ion CSs is close to the force-free configuration, with a strong shear magnetic field component in the CS central region. Spacecraft observations suggest that parallel electron currents are generated by electron beams (pronounced enhancement of the phase space density for electrons with small pitch angles and energies ∼1–3 keV). We discuss several models describing such force-free sub-ion CSs. (paper)
Tensile property improvement of TWIP-cored three-layer steel sheets fabricated by hot-roll-bonding with low-carbon steel or interstitial-free steel

Science.gov (United States)

Park, Jaeyeong; Kim, Jung-Su; Kang, Minju; Sohn, Seok Su; Cho, Won Tae; Kim, Hyoung Seop; Lee, Sunghak

2017-01-01

TWIP-cored three-layer steel sheets were newly fabricated by hot rolling of TWIP steel sheet surrounded by low-carbon (LC) or interstitial-free (IF) steel sheets. TWIP/LC or TWIP/IF interfaces were well bonded without pores or voids, while a few pearlites were thinly formed along the interfaces. The strengths and elongation of the TWIP-cored sheets increased as the volume fraction of TWIP-cored region increased, and were also well matched with the ones calculated by a rule of mixtures based on volume fraction or force fraction. According to digital image correlation and electron back-scatter diffraction analyses, very high strain hardening effect in the initial deformation stage and active twin formation in the interfacial region beneficially affected the overall homogeneous deformation in the TWIP-cored sheets without any yield point phenomenon occurring in the LC sheet and serrations occurring in the TWIP sheet, respectively. These TWIP-cored sheets can cover a wide range of yield strength, tensile strength, and ductility levels, e.g., 320~498 MPa, 545~878 MPa, and 48~54%, respectively, by controlling the volume fraction of TWIP-cored region, and thus present new applications to multi-functional automotive steel sheets requiring excellent properties.
Harry Potter and the Cursed Child: Rewriting Stereotypes

Directory of Open Access Journals (Sweden)

Ilaria Villa

2017-11-01

Full Text Available Harry Potter is a very successful series of novels, mainly addressed to children and adolescents. The story is set in a magical world, parallel to our own; it revolves around the lives of the young wizard Harry Potter and his friends, each novel narrating a year of their lives as they go to school, study the magic arts, and fight against the evil wizard Voldemort (Harry Potter and the Philosopher’s Stone, 1997; Harry Potter and the Chamber of Secrets, 1998; Harry Potter and the Prisoner of Azkaban, 1999; Harry Potter and the Goblet of Fire, 2000; Harry Potter and the Order of the Phoenix, 2003; Harry Potter and the Half-Blood Prince, 2005; Harry Potter and the Deathly Hallows, 2007.
The influence of atmospheric grid resolution in a climate model-forced ice sheet simulation

Science.gov (United States)

Lofverstrom, Marcus; Liakka, Johan

2018-04-01

Coupled climate-ice sheet simulations have been growing in popularity in recent years. Experiments of this type are however challenging as ice sheets evolve over multi-millennial timescales, which is beyond the practical integration limit of most Earth system models. A common method to increase model throughput is to trade resolution for computational efficiency (compromise accuracy for speed). Here we analyze how the resolution of an atmospheric general circulation model (AGCM) influences the simulation quality in a stand-alone ice sheet model. Four identical AGCM simulations of the Last Glacial Maximum (LGM) were run at different horizontal resolutions: T85 (1.4°), T42 (2.8°), T31 (3.8°), and T21 (5.6°). These simulations were subsequently used as forcing of an ice sheet model. While the T85 climate forcing reproduces the LGM ice sheets to a high accuracy, the intermediate resolution cases (T42 and T31) fail to build the Eurasian ice sheet. The T21 case fails in both Eurasia and North America. Sensitivity experiments using different surface mass balance parameterizations improve the simulations of the Eurasian ice sheet in the T42 case, but the compromise is a substantial ice buildup in Siberia. The T31 and T21 cases do not improve in the same way in Eurasia, though the latter simulates the continent-wide Laurentide ice sheet in North America. The difficulty to reproduce the LGM ice sheets in the T21 case is in broad agreement with previous studies using low-resolution atmospheric models, and is caused by a substantial deterioration of the model climate between the T31 and T21 resolutions. It is speculated that this deficiency may demonstrate a fundamental problem with using low-resolution atmospheric models in these types of experiments.
Membincang “Harry Potter”, Membaca Mitos

OpenAIRE

Alex Sobur

2007-01-01

In spite of the celebration of Harry Potter, JK Rowling as the author was accused as teaching and disseminating occultism among her readers. It is said that Harry Potter could turn children to become demons. This accusation raised concerns among parents and educators, especially Christians. Furthermore, a priest from New Mexico, Jack Brock, was threatening to burn Harry Potter volumes. Responding to the threat, JK Rowling was reported calm. Harry Potter still wins the heart of thousands chil...
Understanding Harry: The Potter Frenzy and Furor.

Science.gov (United States)

Saltman, Judith; Denton, Peter H.; Opar, Tamara

2002-01-01

Includes three articles: Harry Potter's Family Tree; What Could Be Wrong with Harry Potter?; Why Do Children Love Harry? that discuss the Harry Potter books by J.K. Rowling. Highlights include censorship issues; their place in children's literature; relationships to other authors; the appeal to adult readers; characterization; criticism of the…
Collisionless current sheet equilibria

Science.gov (United States)

Neukirch, T.; Wilson, F.; Allanson, O.

2018-01-01

Current sheets are important for the structure and dynamics of many plasma systems. In space and astrophysical plasmas they play a crucial role in activity processes, for example by facilitating the release of magnetic energy via processes such as magnetic reconnection. In this contribution we will focus on collisionless plasma systems. A sensible first step in any investigation of physical processes involving current sheets is to find appropriate equilibrium solutions. The theory of collisionless plasma equilibria is well established, but over the past few years there has been a renewed interest in finding equilibrium distribution functions for collisionless current sheets with particular properties, for example for cases where the current density is parallel to the magnetic field (force-free current sheets). This interest is due to a combination of scientific curiosity and potential applications to space and astrophysical plasmas. In this paper we will give an overview of some of the recent developments, discuss their potential applications and address a number of open questions.
Membincang “Harry Potter”, Membaca Mitos

Directory of Open Access Journals (Sweden)

Alex Sobur

2007-06-01

Full Text Available In spite of the celebration of Harry Potter, JK Rowling as the author was accused as teaching and disseminating occultism among her readers. It is said that Harry Potter could turn children to become demons. This accusation raised concerns among parents and educators, especially Christians. Furthermore, a priest from New Mexico, Jack Brock, was threatening to burn Harry Potter volumes. Responding to the threat, JK Rowling was reported calm. Harry Potter still wins the heart of thousands children all over the world. A semiotic analysis toward Harry Potter books concludes that reality and imagination were created (not depicted, or mirrored in the world of wizardry. Furthermore, an ideological analysis has successfully disclosed some imperialism signs being downplayed in the story plot.
48 CFR 223.570 - Drug-free work force.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Drug-free work force. 223.570 Section 223.570 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM... TECHNOLOGIES, OCCUPATIONAL SAFETY, AND DRUG-FREE WORKPLACE Drug-Free Workplace 223.570 Drug-free work force. ...
Bone tissue engineering with human mesenchymal stem cell sheets constructed using magnetite nanoparticles and magnetic force.

Science.gov (United States)

Shimizu, Kazunori; Ito, Akira; Yoshida, Tatsuro; Yamada, Yoichi; Ueda, Minoru; Honda, Hiroyuki

2007-08-01

An in vitro reconstruction of three-dimensional (3D) tissues without the use of scaffolds may be an alternative strategy for tissue engineering. We have developed a novel tissue engineering strategy, termed magnetic force-based tissue engineering (Mag-TE), in which magnetite cationic liposomes (MCLs) with a positive charge at the liposomal surface, and magnetic force were used to construct 3D tissue without scaffolds. In this study, human mesenchymal stem cells (MSCs) magnetically labeled with MCLs were seeded onto an ultra-low attachment culture surface, and a magnet (4000 G) was placed on the reverse side. The MSCs formed multilayered sheet-like structures after a 24-h culture period. MSCs in the sheets constructed by Mag-TE maintained an in vitro ability to differentiate into osteoblasts, adipocytes, or chondrocytes after a 21-day culture period using each induction medium. Using an electromagnet, MSC sheets constructed by Mag-TE were harvested and transplanted into the bone defect in the crania of nude rats. Histological observation revealed that new bone surrounded by osteoblast-like cells was formed in the defect area 14 days after transplantation with MSC sheets, whereas no bone formation was observed in control rats without the transplant. These results indicated that Mag-TE could be used for the transplantation of MSC sheets using magnetite nanoparticles and magnetic force, providing novel methodology for bone tissue engineering.
Harry Pye postkaart Londonist = Harry Pye's Postcard from London / Harry Pye

Index Scriptorium Estoniae

Pye, Harry, 1973-

2009-01-01

Briti kunstimetseenist Russell Herronist ja tema kunstikogusse kuulunud maalide, skulpuuride ja fotode näitusest "See oli nüüd" ("This was now")Londonis 2009. Loetelu näitusel esinenud kunstnikest ja üheksa kunstniku kommentaarid oma tööde kohta. Näituse kuraator Harry Pye
Harry Potter -kirjojen suomennoksissa käytetyt uudissanat.

OpenAIRE

Karppinen, Hanna

2003-01-01

Tutkielman pääasiallinen tarkoitus on kuvata Harry Potter -kirjojen suomennoksissa käytettyjä uudissanoja ja käsitellä uudissanojen teoriaa. Myös lastenkirjallisuudesta, lasten lukemisesta, käännöstieteestä ja Harry Potter -ilmiöstä on kerrottu sen verran, että aihetta ennestään tuntemattomien on mahdollista seurata tutkielmaa. Tutkittavat sanat on kerätty kirjoista Harry Potter ja viisasten kivi, Harry Potter ja salaisuuksien kammio, Harry Potter ja Azkabanin vanki ja Harry Potter ja li...
On the Use of Maximum Force Criteria to Predict Localised Necking in Metal Sheets under Stretch-Bending

Directory of Open Access Journals (Sweden)

Domingo Morales-Palma

2017-11-01

Full Text Available The maximum force criteria and their derivatives, the Swift and Hill criteria, have been extensively used in the past to study sheet formability. Many extensions or modifications of these criteria have been proposed to improve necking predictions under only stretching conditions. This work analyses the maximum force principle under stretch-bending conditions and develops two different approaches to predict necking. The first is a generalisation of classical maximum force criteria to stretch-bending processes. The second approach is an extension of a previous work of the authors based on critical distance concepts, suggesting that necking of the sheet is controlled by the damage of a critical material volume located at the inner side of the sheet. An analytical deformation model is proposed to characterise the stretch-bending process under plane-strain conditions. Different parameters are considered, such as the thickness reduction, the gradient of variables through the sheet thickness, the thickness stress and the anisotropy of the material. The proposed necking models have been successfully applied to predict the failure in different materials, such as steel, brass and aluminium.
Calculation of electromagnetic force in electromagnetic forming process of metal sheet

International Nuclear Information System (INIS)

Xu Da; Liu Xuesong; Fang Kun; Fang Hongyuan

2010-01-01

Electromagnetic forming (EMF) is a forming process that relies on the inductive electromagnetic force to deform metallic workpiece at high speed. Calculation of the electromagnetic force is essential to understand the EMF process. However, accurate calculation requires complex numerical solution, in which the coupling between the electromagnetic process and the deformation of workpiece needs be considered. In this paper, an appropriate formula has been developed to calculate the electromagnetic force in metal work-piece in the sheet EMF process. The effects of the geometric size of coil, the material properties, and the parameters of discharge circuit on electromagnetic force are taken into consideration. Through the formula, the electromagnetic force at different time and in different positions of the workpiece can be predicted. The calculated electromagnetic force and magnetic field are in good agreement with the numerical and experimental results. The accurate prediction of the electromagnetic force provides an insight into the physical process of the EMF and a powerful tool to design optimum EMF systems.
Ice-sheet model sensitivities to environmental forcing and their use in projecting future sea level (the SeaRISE project)

OpenAIRE

Bindschadler, Robert A.; Nowicki, Sophie; Abe-Ouchi, Ayako; Aschwanden, Andy; Choi, Hyeungu; Fastook, Jim; Granzow, Glen; Greve, Ralf; Gutowski, Gail; Herzfeld, Ute; Jackson, Charles; Johnson, Jesse; Khroulev, Constantine; Levermann, Anders; Lipscomb, William H.

2013-01-01

Ten ice-sheet models are used to study sensitivity of the Greenland and Antarctic ice sheets to prescribed changes of surface mass balance, sub-ice-shelf melting and basal sliding. Results exhibit a large range in projected contributions to sea-level change. In most cases, the ice volume above flotation lost is linearly dependent on the strength of the forcing. Combinations of forcings can be closely approximated by linearly summing the contributions from single forcing experiments, suggestin...
Layer disturbances and the radio-echo free zone in ice sheets

Directory of Open Access Journals (Sweden)

R. Drews

2009-08-01

Full Text Available Radio-echo sounding of the Antarctic and Greenlandic ice sheets often reveals a layer in the lowest hundreds of meters above bedrock more or less free of radio echoes, known as the echo-free zone (EFZ. The cause of this feature is unclear, so far lacking direct evidence for its origin. We compare echoes around the EPICA drill site in Dronning Maud Land, Antarctica, with the dielectric properties, crystal orientation fabrics and optical stratigraphy of the EPICA-DML ice core. We find that echoes disappear in the depth range where the dielectric contrast is blurred, and where the coherency of the layers in the ice core is lost due to disturbances caused by the ice flow. At the drill site, the EFZ onset at ~2100 m marks a boundary, below which the ice core may have experienced flow induced disturbances on various scales. The onset may indicate changing rheology which needs to be accounted for in the modeling of ice sheet dynamics.
Disentangling the Roles of Atmospheric and Oceanic Forcing on the Last Deglaciation of the Greenland Ice Sheet

Science.gov (United States)

Keisling, B. A.; Deconto, R. M.

2017-12-01

Today the Greenland Ice Sheet loses mass via both oceanic and atmospheric processes. However, the relative importance of these mass balance components is debated, especially their potential impact on ongoing and future mass imbalance. Discerning the impact of oceanic versus atmospheric forcing during past periods of mass loss provides potential insight into the future behavior of the ice sheet. Here we present an ensemble of Greenland Ice Sheet simulations of the last deglaciation, designed to assess separately the roles of the ocean and the atmosphere in driving mass loss over the last twenty thousand years. We use twenty-eight different ocean forcing scenarios along with a cutting-edge reconstruction of time-evolving atmospheric conditions based on climate model output and δ15N-based temperature reconstructions to generate a range of ice-sheet responses during the deglaciation. We then compare the simulated timing of ice-retreat in individual catchments with estimates based on both 10Be (exposure) and 14C (minimum-limiting) dates. These experiments allow us to identify the ocean forcing scenario that best match the data on a local-to-regional (i.e., 100-1000 km) scales, providing an assessment of the relative importance of ocean and atmospheric forcing components around the periphery of Greenland. We use these simulations to quantify the importance of the three major mass balance terms (calving, oceanic melting, and surface melting) and assess the uncertainty of the relative influence of these factors during the most recent periods of major ice loss. Our results show that mass balance components around different sectors of the ice sheet respond differently to forcing, with oceanic components driving the majority of retreat in south and east Greenland and atmospheric forcing dominating in west and north Greenland In addition, we target three areas at high spatial resolution ( 1 km) around Greenland currently undergoing substantial change (Jakobshavn, Petermann

IS FREE REALLY FREE PALACE ACQUIRE AS AN EFFECTIVE FORCE RENEWAL SOURCE FOR AIR FORCE PUBLIC AFFAIRS

Science.gov (United States)

2016-02-29

student loans. Acceptance of SLRP results in a service commitment of one year for each $10,000, with time running concurrently. In addition, PALACE...trainee requires decreases with the amount of time he/she spends in the program, considering the three other methods of force renewal produce qualified...AU/ACSC/2016 AIR COMMAND AND STAFF COLLEGE AIR UNIVERSITY IS FREE REALLY FREE ? PALACE ACQUIRE AS AN EFFECTIVE FORCE RENEWAL SOURCE FOR AIR
Contact-free sheet resistance determination of large area graphene layers by an open dielectric loaded microwave cavity

International Nuclear Information System (INIS)

Shaforost, O.; Wang, K.; Adabi, M.; Guo, Z.; Hanham, S.; Klein, N.; Goniszewski, S.; Gallop, J.; Hao, L.

2015-01-01

A method for contact-free determination of the sheet resistance of large-area and arbitrary shaped wafers or sheets coated with graphene and other (semi) conducting ultrathin layers is described, which is based on an open dielectric loaded microwave cavity. The sample under test is exposed to the evanescent resonant field outside the cavity. A comparison with a closed cavity configuration revealed that radiation losses have no significant influence of the experimental results. Moreover, the microwave sheet resistance results show good agreement with the dc conductivity determined by four-probe van der Pauw measurements on a set of CVD samples transferred on quartz. As an example of a practical application, correlations between the sheet resistance and deposition conditions for CVD graphene transferred on quartz wafers are described. Our method has a high potential as measurement standard for contact-free sheet resistance measurement and mapping of large area graphene samples
Harry Potter and the Cursed Child: Rewriting Stereotypes

OpenAIRE

Villa, Ilaria

2017-01-01

Harry Potter is a very successful series of novels, mainly addressed to children and adolescents. The story is set in a magical world, parallel to our own; it revolves around the lives of the young wizard Harry Potter and his friends, each novel narrating a year of their lives as they go to school, study the magic arts, and fight against the evil wizard Voldemort (Harry Potter and the Philosopher’s Stone, 1997; Harry Potter and the Chamber of Secrets, 1998; Harry Potter and the Prisoner of Az...
Calculating Free Energies Using Average Force

Science.gov (United States)

Darve, Eric; Pohorille, Andrew; DeVincenzi, Donald L. (Technical Monitor)

2001-01-01

A new, general formula that connects the derivatives of the free energy along the selected, generalized coordinates of the system with the instantaneous force acting on these coordinates is derived. The instantaneous force is defined as the force acting on the coordinate of interest so that when it is subtracted from the equations of motion the acceleration along this coordinate is zero. The formula applies to simulations in which the selected coordinates are either unconstrained or constrained to fixed values. It is shown that in the latter case the formula reduces to the expression previously derived by den Otter and Briels. If simulations are carried out without constraining the coordinates of interest, the formula leads to a new method for calculating the free energy changes along these coordinates. This method is tested in two examples - rotation around the C-C bond of 1,2-dichloroethane immersed in water and transfer of fluoromethane across the water-hexane interface. The calculated free energies are compared with those obtained by two commonly used methods. One of them relies on determining the probability density function of finding the system at different values of the selected coordinate and the other requires calculating the average force at discrete locations along this coordinate in a series of constrained simulations. The free energies calculated by these three methods are in excellent agreement. The relative advantages of each method are discussed.
Force-free field model of ball lightning

International Nuclear Information System (INIS)

Tsui, K.H.

2001-01-01

Due to the nature that the force-free magnetic field, whose current carried by the conducting plasma is everywhere parallel to the magnetic field it generates, is the minimum energy configuration under the constraint of magnetic helicity conservation, ball lightning is considered as a self-organized phenomenon with a plasma fireball immersed in a spherical force-free magnetic field. Since this field does not exert force on the plasma, the plasma pressure, by itself, is in equilibrium with the surrounding environment, and the force-free magnetic field can take on any value without affecting the plasma. Due to this second feature, singular solutions of the magnetic field that are otherwise excluded are allowed, which enable a large amount of energy to be stored to sustain the ball lightning. The singularity is truncated only by the physical limit of current density that a plasma can carry. Scaling the customary soccer-size fireball to larger dimensions could account for day and night sightings of luminous objects in the sky
Force-free thin flux tubes: Basic equations and stability

International Nuclear Information System (INIS)

Zhugzhda, Y.D.

1996-01-01

The thin flux tube approximation is considered for a straight, symmetrical, force-free, rigidly rotating flux tube. The derived set of equations describes tube, body sausage, and Alfveacute charn wave modes and is valid for any values of Β. The linear waves and instabilities of force-free flux tubes are considered. The comparison of approximate and exact solutions for an untwisted, nonrotating flux tube is performed. It is shown that the approximate and exact dispersion equations coincides, except the 20% discrepancy of sausage frequencies. An effective cross section is proposed to introduce the removal of this discrepancy. It makes the derived approximation correct for the force-free thin flux tube dynamics, except the detailed structure of radial eigenfunction. The dispersion of Alfveacute charn torsional waves in a force-free tubes appears. The valve effect of one directional propagation of waves in rotating twisted tube is revealed. The current and rotational sausage instabilities of a force-free, thin flux tube are considered. copyright 1996 American Institute of Physics
Manifold free multiple sheet superplastic forming

Science.gov (United States)

Elmer, John W.; Bridges, Robert L.

2004-01-13

Fluid-forming compositions in a container attached to enclosed adjacent sheets are heated to relatively high temperatures to generate fluids (gases) that effect inflation of the sheets. Fluid rates to the enclosed space between the sheets can be regulated by the canal from the container. Inflated articles can be produced by a continuous, rather than batch-type, process.
Harry Potter: Agency or Addiction?

Science.gov (United States)

Mills, Alice

2010-01-01

This article considers limitations on agency for characters in the Harry Potter novels, in particular, how far they are driven by an addictive yearning for their beloved dead. As well as Harry's yearning for his dead parents, Dumbledore's guilt, Snape's longing and Slughorn's craving can be read as evidence of addiction rather than love, while the…
Onset of fast "ideal" tearing in thin current sheets: Dependence on the equilibrium current profile

Science.gov (United States)

Pucci, F.; Velli, M.; Tenerani, A.; Del Sarto, D.

2018-03-01

In this paper, we study the scaling relations for the triggering of the fast, or "ideal," tearing instability starting from equilibrium configurations relevant to astrophysical as well as laboratory plasmas that differ from the simple Harris current sheet configuration. We present the linear tearing instability analysis for equilibrium magnetic fields which (a) go to zero at the boundary of the domain and (b) contain a double current sheet system (the latter previously studied as a Cartesian proxy for the m = 1 kink mode in cylindrical plasmas). More generally, we discuss the critical aspect ratio scalings at which the growth rates become independent of the Lundquist number S, in terms of the dependence of the Δ' parameter on the wavenumber k of unstable modes. The scaling Δ'(k) with k at small k is found to categorize different equilibria broadly: the critical aspect ratios may be even smaller than L/a ˜ Sα with α = 1/3 originally found for the Harris current sheet, but there exists a general lower bound α ≥ 1/4.
Harry Pye postkaart Londonist : Elevant ja Kindlus = Harry Pye's Postcard from London : The Elephant & Castle / Harry Pye

Index Scriptorium Estoniae

Pye, Harry, 1973-

2008-01-01

Londoni kirjanik ja kunstnik Harry Pye Lõuna-Londoni linnaosast Elephant & Castle, mille võlu ta avastab koos sõpradega linnaosast näituse jaoks fotosid tehes. Fotod eksponeeritakse grupinäitusel "Tõeline elu"
[On the psychoanalytic view of Harry Potter].

Science.gov (United States)

Subkowski, Peter

2008-01-01

This paper analyzes the exemplary mental development that Harry Potter undertakes after the massive traumatic loss of his parents at the early age of 15 months and the following neglect by his relatives until he becomes a mature adult. On the basis of his internalized mothers love and by identification with his father and his paternally friend Dumbledore Harry gains increasing self-confidence and new friends in his peer group in the course of time. After passing numerous conflicts and experiencing friendship Harry reaches the stage of initiation into the world of the adults. On the oedipal level he finally is able to deidealize his father and Dumbledore. And at the end Harry is not seduced by absolute power and the triumph over death itself. On the contrary he is ready to sacrifice himself for his friends and thus can overcome the fragmented Voldemort. Readers can identify with Harry, can recognize their own experiences and conflicts and can deal with the proposed conflict resolution patterns on different levels. This contemporary "Bildungsroman" deals with important typical interpersonal and cultural issues for young people. This is what leads young readers to strong resonance and identification processes and explains the great success of the Harry Potter story.
Hysteresis-controlled instability waves in a scale-free driven current sheet model

Directory of Open Access Journals (Sweden)

V. M. Uritsky

2005-01-01

Full Text Available Magnetospheric dynamics is a complex multiscale process whose statistical features can be successfully reproduced using high-dimensional numerical transport models exhibiting the phenomenon of self-organized criticality (SOC. Along this line of research, a 2-dimensional driven current sheet (DCS model has recently been developed that incorporates an idealized current-driven instability with a resistive MHD plasma system (Klimas et al., 2004a, b. The dynamics of the DCS model is dominated by the scale-free diffusive energy transport characterized by a set of broadband power-law distribution functions similar to those governing the evolution of multiscale precipitation regions of energetic particles in the nighttime sector of aurora (Uritsky et al., 2002b. The scale-free DCS behavior is supported by localized current-driven instabilities that can communicate in an avalanche fashion over arbitrarily long distances thus producing current sheet waves (CSW. In this paper, we derive the analytical expression for CSW speed as a function of plasma parameters controlling local anomalous resistivity dynamics. The obtained relation indicates that the CSW propagation requires sufficiently high initial current densities, and predicts a deceleration of CSWs moving from inner plasma sheet regions toward its northern and southern boundaries. We also show that the shape of time-averaged current density profile in the DCS model is in agreement with steady-state spatial configuration of critical avalanching models as described by the singular diffusion theory of the SOC. Over shorter time scales, SOC dynamics is associated with rather complex spatial patterns and, in particular, can produce bifurcated current sheets often seen in multi-satellite observations.
The improbability of Harris interest points

DEFF Research Database (Denmark)

Loog, Marco; Lauze, Francois Bernard

2010-01-01

An elementary characterization of the map underlying Harris corners, also known as Harris interest points or key points, is provided. Two principal and basic assumptions made are: 1) Local image structure is captured in an uncommitted way, simply using weighted raw image values around every image...
The Improbability of Harris Interest Points

NARCIS (Netherlands)

Loog, M.; Lauze, F.B.

2010-01-01

An elementary characterization of the map underlying Harris corners, also known as Harris interest points or key points, is provided. Two principal and basic assumptions made are: 1) Local image structure is captured in an uncommitted way, simply using weighted raw image values around every image
Sonochemical Preparation and Subsequent Fixation of Oxygen-Free Graphene Sheets at N,N-Dimethyloctylamine-Aqua Boundary

Directory of Open Access Journals (Sweden)

Elena A. Trusova

2018-01-01

Full Text Available In this study, the syntheses of oxygen-free graphene sheets and the method of its fixation at an oil-aqua interface were presented. The graphene sheets were prepared by exfoliation of synthetic graphite powder in an aqua-organic medium under ultrasound irradiation. N,N-Dimethyloctylamine- (DMOA- aqua emulsion was used as the liquid medium, and pH was equal to 3. The obtained graphene nanosuspension was fractionated by sedimentation and decanted according to the weight. The graphene nanoparticle fractions, differing in configuration and number of layers, have been characterized using transmission electron microscopy (TEM, electron diffraction, HRTEM, Raman spectroscopy, and electron energy loss spectroscopy (EELS. It was found that using a DMOA-aqua mixture as the liquid medium in ultrasonic treatment of synthetic graphite leads to the formation of oxygen-free 1-2-layer graphene sheets attached to the DMOA-aqua interface. The proposed method differs from known ones by using a small amount of more environmentally friendly organic substances. It allows to obtain large quantities of oxygen-free graphene, and finally unconverted graphite can be directed for reuse. The proposed method allows to obtain both 2D graphene sheets with micron linear dimensions and 3D packages with a high content of defects. Both these species are in demand in areas related to the development of new materials with unique electrophysical properties.
Sensitivity of the Greenland Ice Sheet to Interglacial Climate Forcing: MIS 5e Versus MIS 11

Science.gov (United States)

Rachmayani, Rima; Prange, Matthias; Lunt, Daniel J.; Stone, Emma J.; Schulz, Michael

2017-11-01

The Greenland Ice Sheet (GrIS) is thought to have contributed substantially to high global sea levels during the interglacials of Marine Isotope Stage (MIS) 5e and 11. Geological evidence suggests that the mass loss of the GrIS was greater during the peak interglacial of MIS 11 than MIS 5e, despite a weaker boreal summer insolation. We address this conundrum by using the three-dimensional thermomechanical ice sheet model Glimmer forced by Community Climate System Model version 3 output for MIS 5e and MIS 11 interglacial time slices. Our results suggest a stronger sensitivity of the GrIS to MIS 11 climate forcing than to MIS 5e forcing. Besides stronger greenhouse gas radiative forcing, the greater MIS 11 GrIS mass loss relative to MIS 5e is attributed to a larger oceanic heat transport toward high latitudes by a stronger Atlantic meridional overturning circulation. The vigorous MIS 11 ocean overturning, in turn, is related to a stronger wind-driven salt transport from low to high latitudes promoting North Atlantic Deep Water formation. The orbital insolation forcing, which causes the ocean current anomalies, is discussed.
The effect of ambient pressure on ejecta sheets from free-surface ablation

KAUST Repository

Marston, J. O.; Mansoor, Mohammad M.; Thoroddsen, Sigurdur T; Truscott, T. T.

2016-01-01

We present observations from an experimental study of the ablation of a free liquid surface promoted by a focused laser pulse, causing a rapid discharge of liquid in the form of a very thin conical-shaped sheet. In order to capture the dynamics, we employ a state-of-the-art ultra-high-speed video camera capable of capturing events at (Formula presented.) fps with shutter speeds down to 20 ns, whereby we were able to capture not only the ejecta sheet, but also the shock wave, emerging at speeds of up to 1.75 km/s, which is thus found to be hypersonic (Mach 5). Experiments were performed at a range of ambient pressures in order to study the effect of air drag on the evolution of the sheet, which was always observed to dome over, even at pressures as low as 3.8 kPa. At reduced pressures, the extended sheet evolution led to the formation of interference fringe patterns from which, by comparison with the opening speed of rupture, we were able to determine the ejecta thickness. © 2016, Springer-Verlag Berlin Heidelberg.
The effect of ambient pressure on ejecta sheets from free-surface ablation

KAUST Repository

Marston, J. O.

2016-04-16

We present observations from an experimental study of the ablation of a free liquid surface promoted by a focused laser pulse, causing a rapid discharge of liquid in the form of a very thin conical-shaped sheet. In order to capture the dynamics, we employ a state-of-the-art ultra-high-speed video camera capable of capturing events at (Formula presented.) fps with shutter speeds down to 20 ns, whereby we were able to capture not only the ejecta sheet, but also the shock wave, emerging at speeds of up to 1.75 km/s, which is thus found to be hypersonic (Mach 5). Experiments were performed at a range of ambient pressures in order to study the effect of air drag on the evolution of the sheet, which was always observed to dome over, even at pressures as low as 3.8 kPa. At reduced pressures, the extended sheet evolution led to the formation of interference fringe patterns from which, by comparison with the opening speed of rupture, we were able to determine the ejecta thickness. © 2016, Springer-Verlag Berlin Heidelberg.
Discovering the Archetypes of "Harry Potter."

Science.gov (United States)

Evans, Allen D.

The "Harry Potter" series has become a phenomenal success with children. "Harry Potter" books in print worldwide is in excess of 116 million, and they have been translated into 47 languages. What might account for this huge popularity? While the characters and events are certainly engaging, funny, original, and creative, they…
Harry Pye postkaart Londonist : Öö maa peal = Harry Pye's Postcard from London : Night on Earth / Harry Pye

Index Scriptorium Estoniae

Pye, Harry, 1973-

2006-01-01

Kuraator, kunstnik ja kirjanik Harry Pye kirjeldab Jim Jarmuschi filmist inspireeritud näitust "Night on Earth" Ida-Londonis, endises Viktooria-aegses koolimajas - erinevate inimeste muljed ühest õhtust maakera erinevates paikades koos kunstnike illustratsioonidega

Harry Potter Inspires a New Sport

Science.gov (United States)

Smith, Kara

2004-01-01

In July 2000, a Harry Potter camp was held at the University of Windsor Faculty of Education to reenact and celebrate J. K. Rowling's novel Harry Potter. As a result of this camp, a new sport was invented--Quidditch--which soon took hold in Ontario, Canada. Quidditch has since been played by teams at Chatham Kent Secondary School, Chatham…
A high-power millimeter-wave sheet beam free-electron laser amplifier

International Nuclear Information System (INIS)

Cheng, S.; Destler, W.W.; Granatstein, V.L.; Antonsen, T.M.; Levush, B.; Rodgers, J.; Zhang, Z.X.

1996-01-01

The results of experiments with a short period (9.6 mm) wiggler sheet electron beam (1.0 mm x 2.0 cm) millimeter-wave free electron laser (FEL) amplifier are presented. This FEL amplifier utilized a strong wiggler field for sheet beam confinement in the narrow beam dimension and an offset-pole side-focusing technique for the wide dimension beam confinement. The beam analysis herein includes finite emittance and space-charge effects. High-current beam propagation was achieved as a result of extensive analytical studies and experimental optimization. A design optimization resulted in a low sensitivity to structure errors and beam velocity spread, as well as a low required beam energy. A maximum gain of 24 dB was achieved with a 1-kW injected signal power at 86 GHz, a 450-kV beam voltage, 17-A beam current, 3.8-kG wiggler magnetic field, and a 74-period wiggler length. The maximum gain with a one-watt injected millimeter-wave power was observed to be over 30 dB. The lower gain at higher injection power level indicates that the device has approached saturation. The device was studied over a broad range of experimental parameters. The experimental results have a good agreement with expectations from a one-dimensional simulation code. The successful operation of this device has proven the feasibility of the original concept and demonstrated the advantages of the sheet beam FEL amplifier. The results of the studies will provide guidelines for the future development of sheet beam FEL's and/or other kinds of sheet beam devices. These devices have fusion application
Putting Harry Potter on the couch.

Science.gov (United States)

Noctor, Colman

2006-10-01

This article will explore J.K. Rowling's Harry Potter (2004) literary series from a psychoanalytical perspective. The author draws out the main themes of the Harry Potter stories to see if they can be employed clinically to assist in psychotherapeutic work with children and adolescents. The article begins by discussing Bettelheim's (1976) extensive work on children's fairytales and their therapeutic value, moving on to discuss Rustin and Rustin's (2005) more recent insights into narrative therapy and children's fiction. A clinical example is given of how the storylines were implemented to enhance a psychotherapeutic group process for adolescents. The author hopes to illustrate the power of symbolism and metaphor in the Harry Potter storylines and elucidate why these books may appeal to young people with mental health difficulties.
Elimination of remaining undifferentiated induced pluripotent stem cells in the process of human cardiac cell sheet fabrication using a methionine-free culture condition.

Science.gov (United States)

Matsuura, Katsuhisa; Kodama, Fumiko; Sugiyama, Kasumi; Shimizu, Tatsuya; Hagiwara, Nobuhisa; Okano, Teruo

2015-03-01

Cardiac tissue engineering is a promising method for regenerative medicine. Although we have developed human cardiac cell sheets by integration of cell sheet-based tissue engineering and scalable bioreactor culture, the risk of contamination by induced pluripotent stem (iPS) cells in cardiac cell sheets remains unresolved. In the present study, we established a novel culture method to fabricate human cardiac cell sheets with a decreased risk of iPS cell contamination while maintaining viabilities of iPS cell-derived cells, including cardiomyocytes and fibroblasts, using a methionine-free culture condition. When cultured in the methionine-free condition, human iPS cells did not survive without feeder cells and could not proliferate or form colonies on feeder cells or in coculture with cells for cardiac cell sheet fabrication. When iPS cell-derived cells after the cardiac differentiation were transiently cultured in the methionine-free condition, gene expression of OCT3/4 and NANOG was downregulated significantly compared with that in the standard culture condition. Furthermore, in fabricated cardiac cell sheets, spontaneous and synchronous beating was observed in the whole area while maintaining or upregulating the expression of various cardiac and extracellular matrix genes. These findings suggest that human iPS cells are methionine dependent and a methionine-free culture condition for cardiac cell sheet fabrication might reduce the risk of iPS cell contamination.
DVD. Harry Potter ja Fööniksi ordu / Rain Kooli

Index Scriptorium Estoniae

Kooli, Rain

2007-01-01

Lühiarvustus DVD-le Harry Potteri viiendast filmist "Harry Potter ja Fööniksi ordu" ("Harry Potter and the Order of the Phoenix"), režissöör David Yates : Ameerika Ühendriigid-Suurbritannia 2007
Towards crack-free ablation cutting of thin glass sheets with picosecond pulsed lasers

Science.gov (United States)

Sun, Mingying; Eppelt, Urs; Hartmann, Claudia; Schulz, Wolfgang; Zhu, Jianqiang; Lin, Zunqi

2017-08-01

We investigated the morphology and mechanism of laser-induced damage in the ablation cutting of thin glass sheets with picosecond laser. Two kinds of damage morphologies observed on the cross-section of the cut channel, are caused by high-density free-electrons and the temperature accumulation, respectively. Notches and micro-cracks can be observed on the top surface of the sample near the cut edge. The surface micro-cracks were related to high energy free-electrons and also the heat-affected zone. Heat-affected-zone and visible-cracks free conditions of glass cutting were achieved by controlling the repetition rate and spatial overlap of laser pulses.
Current sheets with inhomogeneous plasma temperature: Effects of polarization electric field and 2D solutions

International Nuclear Information System (INIS)

Catapano, F.; Zimbardo, G.; Artemyev, A. V.; Vasko, I. Y.

2015-01-01

We develop current sheet models which allow to regulate the level of plasma temperature and density inhomogeneities across the sheet. These models generalize the classical Harris model via including two current-carrying plasma populations with different temperature and the background plasma not contributing to the current density. The parameters of these plasma populations allow regulating contributions of plasma density and temperature to the pressure balance. A brief comparison with spacecraft observations demonstrates the model applicability for describing the Earth magnetotail current sheet. We also develop a two dimensional (2D) generalization of the proposed model. The interesting effect found for 2D models is the nonmonotonous profile (along the current sheet) of the magnetic field component perpendicular to the current sheet. Possible applications of the model are discussed
Current sheets with inhomogeneous plasma temperature: Effects of polarization electric field and 2D solutions

Energy Technology Data Exchange (ETDEWEB)

Catapano, F., E-mail: menacata3@gmail.com; Zimbardo, G. [Dipartimento di Fisica, Università della Calabria, Rende, Cosenza (Italy); Artemyev, A. V., E-mail: ante0226@gmail.com; Vasko, I. Y. [Space Research Institute, RAS, Moscow (Russian Federation)

2015-09-15

We develop current sheet models which allow to regulate the level of plasma temperature and density inhomogeneities across the sheet. These models generalize the classical Harris model via including two current-carrying plasma populations with different temperature and the background plasma not contributing to the current density. The parameters of these plasma populations allow regulating contributions of plasma density and temperature to the pressure balance. A brief comparison with spacecraft observations demonstrates the model applicability for describing the Earth magnetotail current sheet. We also develop a two dimensional (2D) generalization of the proposed model. The interesting effect found for 2D models is the nonmonotonous profile (along the current sheet) of the magnetic field component perpendicular to the current sheet. Possible applications of the model are discussed.
The sensitivity of the Greenland Ice Sheet to glacial-interglacial oceanic forcing

Science.gov (United States)

Tabone, Ilaria; Blasco, Javier; Robinson, Alexander; Alvarez-Solas, Jorge; Montoya, Marisa

2018-04-01

Observations suggest that during the last decades the Greenland Ice Sheet (GrIS) has experienced a gradually accelerating mass loss, in part due to the observed speed-up of several of Greenland's marine-terminating glaciers. Recent studies directly attribute this to warming North Atlantic temperatures, which have triggered melting of the outlet glaciers of the GrIS, grounding-line retreat and enhanced ice discharge into the ocean, contributing to an acceleration of sea-level rise. Reconstructions suggest that the influence of the ocean has been of primary importance in the past as well. This was the case not only in interglacial periods, when warmer climates led to a rapid retreat of the GrIS to land above sea level, but also in glacial periods, when the GrIS expanded as far as the continental shelf break and was thus more directly exposed to oceanic changes. However, the GrIS response to palaeo-oceanic variations has yet to be investigated in detail from a mechanistic modelling perspective. In this work, the evolution of the GrIS over the past two glacial cycles is studied using a three-dimensional hybrid ice-sheet-shelf model. We assess the effect of the variation of oceanic temperatures on the GrIS evolution on glacial-interglacial timescales through changes in submarine melting. The results show a very high sensitivity of the GrIS to changing oceanic conditions. Oceanic forcing is found to be a primary driver of GrIS expansion in glacial times and of retreat in interglacial periods. If switched off, palaeo-atmospheric variations alone are not able to yield a reliable glacial configuration of the GrIS. This work therefore suggests that considering the ocean as an active forcing should become standard practice in palaeo-ice-sheet modelling.
Striation-free fibre laser cutting of mild steel sheets

Energy Technology Data Exchange (ETDEWEB)

Sobih, M.; Crouse, P.L.; Li, L. [University of Manchester, Laser Processing Research Centre, School of Mechanical, Aerospace and Civil Engineering, Sackville Street Building, P.O. Box 88, Manchester (United Kingdom)

2008-01-15

High-power laser cutting is extensively used in many industrial applications. An important weakness of this process is the formation of striations, i.e. regular lines on the cut surface, which lowers the quality of the surfaces produced. The elimination of striation formation is thus of considerable importance, since it could open a variety of novel high-precision applications. This study presents the initial results of a laser cutting study using a 1 kW single-mode fibre laser, a relative newcomer in the field of laser metal cutting. Striation-free laser cuts are demonstrated when cutting 1 mm thick mild steel sheets. (orig.)
Static current-sheet models of quiescent prominences

Science.gov (United States)

Wu, F.; Low, B. C.

1986-12-01

A particular class of theoretical models idealize the prominence to be a discrete flat electric-current sheet suspended vertically in a potential magnetic field. The weight of the prominence is supported by the Lorentz force in the current sheet. These models can be extended to have curved electric-current sheets and to vary three-dimensionally. The equation for force balance is 1 over 4 pi (del times B) times Bdel p- p9 z=zero. Using Cartesian coordinates we take, for simplicity, a uniform gravity with constant acceleration g in the direction -z. If we are interested not in the detailed internal structure of the prominence, but in the global magnetic configuration around the prominence, we may take prominence plasma to be cold. Consideration is given to how such equilibrium states can be constructed. To simplify the mathematical problem, suppose there is no electric current in the atmosphere except for the discrete currents in the cold prominence sheet. Let us take the plane z =0 to be the base of the atmosphere and restrict our attention to the domain z greater than 0. The task we have is to solve for a magnetic field which is everywhere potential except on some free surface S, subject to suit able to boundary conditions. The surface S is determined by requiring that it possesses a discrete electric current density such that the Lorentz force on it is everywhere vertically upward to balance the weight of the material m(S). Since the magnetic field is potential in the external atmosphere, the latter is decoupled from the magnetic field and its plane parallel hydrostatic pressure and density can be prescribed.
Rapid fabricating technique for multi-layered human hepatic cell sheets by forceful contraction of the fibroblast monolayer.

Directory of Open Access Journals (Sweden)

Yusuke Sakai

Full Text Available Cell sheet engineering is attracting attention from investigators in various fields, from basic research scientists to clinicians focused on regenerative medicine. However, hepatocytes have a limited proliferation potential in vitro, and it generally takes a several days to form a sheet morphology and multi-layered sheets. We herein report our rapid and efficient technique for generating multi-layered human hepatic cell (HepaRG® cell sheets using pre-cultured fibroblast monolayers derived from human skin (TIG-118 cells as a feeder layer on a temperature-responsive culture dish. Multi-layered TIG-118/HepaRG cell sheets with a thick morphology were harvested on day 4 of culturing HepaRG cells by forceful contraction of the TIG-118 cells, and the resulting sheet could be easily handled. In addition, the human albumin and alpha 1-antitrypsin synthesis activities of TIG-118/HepaRG cells were approximately 1.2 and 1.3 times higher than those of HepaRG cells, respectively. Therefore, this technique is considered to be a promising modality for rapidly fabricating multi-layered human hepatocyte sheets from cells with limited proliferation potential, and the engineered cell sheet could be used for cell transplantation with highly specific functions.
Experimental realization of millimeter-wave amplification by a sheet beam free electron laser

International Nuclear Information System (INIS)

Zhang, Z.; Destler, W.W.; Granatstein, V.L.; Antonsen, T.M. Jr.; Levush, B.; Rodgers, J.; Cheng, S.

1994-01-01

We report an observation of millimeter-wave (94 GHz) amplification in a sheet beam, short period, planar wiggler, free electron laser amplifier. The observed gain is about 5 dB for a 530 keV, 4 A beam through a 54 cm wiggler. Wave energy absorption was also observed when the beam energy is off-resonance. Experimental results are in good agreement with numerical simulation. This amplifier configuration has potential for producing equally high output power but at relatively low voltage compared with longer period free electron lasers
First operation of a wiggler-focused, sheet beam free electron laser amplifier

International Nuclear Information System (INIS)

Destler, W.W.; Cheng, S.; Zhang, Z.X.; Antonsen, T.M. Jr.; Granatstein, V.L.; Levush, B.; Rodgers, J.

1994-01-01

A wiggler-focused, sheet beam free electron laser (FEL) amplifier utilizing a short-period wiggler magnet has been proposed as a millimeter-wave source for current profile modification and/or electron cyclotron resonance heating of tokamak plasmas. As proposed, such an amplifier would operate at a frequency of approximately 100--200 GHz with an output power of 1--10 MW CW. Electron beam energy would be in the range 500--1000 keV. To test important aspects of this concept, an initial sheet beam FEL amplifier experiment has been performed using a 1 mmx2 cm sheet beam produced by a pulse line accelerator with a pulse duration of 100 ns. The 500--570 keV, 4--18 A sheet beam is propagated through a 56 period uniform wiggler (λ w =9.6 mm) with a peak wiggler amplitude of 2--5 kG. Linear amplification of a 5--10 W, 94 GHz signal injected in the TE 01 rectangular mode is observed. All features of the amplified signal, including pulse shape and duration, are in accordance with the predictions of numerical simulation. Amplified signal gain has been measured as a function of injected beam energy, current, and wiggler field amplitude and is also in good agreement with simulation results. Continuation of this experiment will involve studying nonlinear amplifier operation and adding a section of tapered wiggler
The force-free configuration of flux ropes in geomagnetotail: Cluster observations

Science.gov (United States)

Yang, Y. Y.; Shen, C.; Zhang, Y. C.; Rong, Z. J.; Li, X.; Dunlop, M.; Ma, Y. H.; Liu, Z. X.; Carr, C. M.; Rème, H.

2014-08-01

Unambiguous knowledge of magnetic field structure and the electric current distribution is critical for understanding the origin, evolution, and related dynamic properties of magnetic flux ropes (MFRs). In this paper, a survey of 13 MFRs in the Earth's magnetotail are conducted by Cluster multipoint analysis, so that their force-free feature, i.e., the kind of magnetic field structure satisfying J × B = 0, can be probed directly. It is showed that the selected flux ropes with the bipolar signature of the south-north magnetic field component generally lie near the equatorial plane, as expected, and that the magnetic field gradient is rather weak near the axis center, where the curvature radius is large. The current density (up to several tens of nA/m2) reaches their maximum values as the center is approached. It is found that the stronger the current density, the smaller the angles between the magnetic field and current in MFRs. The direct observations show that only quasi force-free structure is observed, and it tends to appear in the low plasma beta regime (in agreement with the theoretic results). The quasi force-free region is generally found to be embedded in the central portion of the MFRs, where the current is approximately field aligned and proportional to the strength of core field. It is shown that ~60% of surveyed MFRs can be globally approximated as force free. The force-free factor α is found to be nonconstantly varied through the quasi force-free MFR, suggesting that the force-free structure is nonlinear.
77 FR 14839 - Harris & Harris Group, Inc.; Notice of Application

Science.gov (United States)

2012-03-13

... SECURITIES AND EXCHANGE COMMISSION [Investment Company Act Release No. 29976; 812-13313] Harris... registered closed-end investment company from selling any common stock of which it is the issuer at a price... will be at the closing price of the common stock on the Nasdaq Global Market (or any primary exchange...
Energy of Force-Free Magnetic Fields in Relation to Coronal Mass Ejections

International Nuclear Information System (INIS)

Choe, G.S.; Cheng, C.Z.

2002-01-01

In typical observations of coronal mass ejections (CMEs), a magnetic structure of a helmet-shaped closed configuration bulges out and eventually opens up. However, a spontaneous transition between these field configurations has been regarded to be energetically impossible in force-free fields according to the Aly-Sturrock theorem. The theorem states that the maximum energy state of force-free fields with a given boundary normal field distribution is the open field. The theorem implicitly assumes the existence of the maximum energy state, which may not be taken for granted. In this study, we have constructed force-free fields containing tangential discontinuities in multiple flux systems. These force-free fields can be generated from a potential field by footpoint motions that do not conserve the boundary normal field distribution. Some of these force-free fields are found to have more magnetic energy than the corresponding open fields. The constructed force-free configurations are compared with observational features of CME-bearing active regions. Possible mechanisms of CMEs are also discussed
The response of grounded ice to ocean temperature forcing in a coupled ice sheet-ice shelf-ocean cavity model

Science.gov (United States)

Goldberg, D. N.; Little, C. M.; Sergienko, O. V.; Gnanadesikan, A.

2010-12-01

Ice shelves provide a pathway for the heat content of the ocean to influence continental ice sheets. Changes in the rate or location of basal melting can alter their geometry and effect changes in stress conditions at the grounding line, leading to a grounded ice response. Recent observations of ice streams and ice shelves in the Amundsen Sea sector of West Antarctica have been consistent with this story. On the other hand, ice dynamics in the grounding zone control flux into the shelf and thus ice shelf geometry, which has a strong influence on the circulation in the cavity beneath the shelf. Thus the coupling between the two systems, ocean and ice sheet-ice shelf, can be quite strong. We examine the response of the ice sheet-ice shelf-ocean cavity system to changes in ocean temperature using a recently developed coupled model. The coupled model consists a 3-D ocean model (GFDL's Generalized Ocean Layered Dynamics model, or GOLD) to a two-dimensional ice sheet-ice shelf model (Goldberg et al, 2009), and allows for changing cavity geometry and a migrating grounding line. Steady states of the coupled system are found even under considerable forcing. The ice shelf morphology and basal melt rate patterns of the steady states exhibit detailed structure, and furthermore seem to be unique and robust. The relationship between temperature forcing and area-averaged melt rate is influenced by the response of ice shelf morphology to thermal forcing, and is found to be sublinear in the range of forcing considered. However, results suggest that area-averaged melt rate is not the best predictor of overall system response, as grounding line stability depends on local aspects of the basal melt field. Goldberg, D N, D M Holland and C G Schoof, 2009. Grounding line movement and ice shelf buttressing in marine ice sheets, Journal of Geophysical Research-Earth Surfaces, 114, F04026.
Cross-Culturalism of Harry Potter

Directory of Open Access Journals (Sweden)

Vesna Suljic

2013-03-01

Full Text Available Seven books in the Harry Potter series by J. K. Rowling have broken sales records worldwide. They have been made into films which have also attracted millions of fans, and the Harry Potter brand has been a hallmark since the beginning of the new millennium. Fifteen years after publishing the first book in the heptalogy, e-books again made more than 1 million pounds in just three days in April 2012. The article "Cross-Culturalism of Harry Potter" examines what attracted readers to the first and then subsequent books in the Harry Potter series and presents some of the cross-cultural implications in socio-linguistic, educational and psychological areas. It analyzes the reasons for the sales records around the world and why the books appeal to both young and adult population. It also includes some controversy following the series' world success. The research methods include: evaluation of the primary sources (seven books in the series, the media coverage, literary reviews by scholars such as Bloom and Thomas, literary critics' essays, and a survey of English language instructors in an educational institution. The main contributing factors to the global popularity of the series are: highly entertaining, well-plotted text with fantastic setting but also realistic references to the modern era; the text which continues the archetypal story-telling traditions, incorporating the contemporary socio-economic, political and educational issues; smart marketing; excessive media coverage; the Internet; the film industry involvement; and the universal human need to believe that good can triumph over evil.
Motion and shape of snowplough sheets in coaxial accelerators

International Nuclear Information System (INIS)

Tsagas, N.F.; Mair, G.L.R.; Prinn, A.E.

1978-01-01

A long coaxial accelerator is filled with helium at initial gas pressure between 0.2 and 4 Torr. When connected to a large capacitor at < - 10 kV a discharge is started at one end; the central electrode has negative polarity. The velocity of the plasma sheet, the snowplough, and its shape have been derived from streak photographs for terminal currents between about 100 and 300 kA. The motion of the sheet has been analysed by balancing the electromagnetic driving force against the inertia of the mass of the gas swept up by a plane sheet taken to be impenetrable to gas atoms. The calculated positions and average sheet velocities, which involve simplifying assumptions, have been found to be in good agreement with observations at different positions and pressures. Also the shape of the sheet has been derived by allowing for the sheet's curvature in the linear momentum equation while net radial motions causing variations in profile have, at first, been excluded. The calculated shape of the sheet is very nearly that photographically observed. The axial velocity of a sheet element is evaluated under the assumption that the plasma is azimuthally uniform, free of spikes and that the vessel's wall does not affect the shape. (author)

Reading & Writing Workshop. The Fantastic Harry Potter.

Science.gov (United States)

Lockman, Darcy

2000-01-01

Discusses the Harry Potter series by J.K. Rowling, explaining how to use it to enhance reading and writing instruction. The article presents a brief interview with J.K. Rowling, a Harry Potter time line, and ideas for working on writing and editing paragraphs, creating dynamic dialogue, and fixing grammar and punctuation. Other fantasy books are…
Experiments on sheet metal shearing

OpenAIRE

Gustafsson, Emil

2013-01-01

Within the sheet metal industry, different shear cutting technologies are commonly used in several processing steps, e.g. in cut to length lines, slitting lines, end cropping etc. Shearing has speed and cost advantages over competing cutting methods like laser and plasma cutting, but involves large forces on the equipment and large strains in the sheet material.Numerical models to predict forces and sheared edge geometry for different sheet metal grades and different shear parameter set-ups a...
Endogenous Sheet-Averaged Tension Within a Large Epithelial Cell Colony.

Science.gov (United States)

Dumbali, Sandeep P; Mei, Lanju; Qian, Shizhi; Maruthamuthu, Venkat

2017-10-01

Epithelial cells form quasi-two-dimensional sheets that function as contractile media to effect tissue shape changes during development and homeostasis. Endogenously generated intrasheet tension is a driver of such changes, but has predominantly been measured in the presence of directional migration. The nature of epithelial cell-generated forces transmitted over supracellular distances, in the absence of directional migration, is thus largely unclear. In this report, we consider large epithelial cell colonies which are archetypical multicell collectives with extensive cell-cell contacts but with a symmetric (circular) boundary. Using the traction force imbalance method (TFIM) (traction force microscopy combined with physical force balance), we first show that one can determine the colony-level endogenous sheet forces exerted at the midline by one half of the colony on the other half with no prior assumptions on the uniformity of the mechanical properties of the cell sheet. Importantly, we find that this colony-level sheet force exhibits large variations with orientation-the difference between the maximum and minimum sheet force is comparable to the average sheet force itself. Furthermore, the sheet force at the colony midline is largely tensile but the shear component exhibits significantly more variation with orientation. We thus show that even an unperturbed epithelial colony with a symmetric boundary shows significant directional variation in the endogenous sheet tension and shear forces that subsist at the colony level.
The elastic free energy of a tandem modular protein under force.

Science.gov (United States)

Valle-Orero, Jessica; Eckels, Edward C; Stirnemann, Guillaume; Popa, Ionel; Berkovich, Ronen; Fernandez, Julio M

2015-05-01

Recent studies have provided a theoretical framework for including entropic elasticity in the free energy landscape of proteins under mechanical force. Accounting for entropic elasticity using polymer physics models has helped explain the hopping behavior seen in single molecule experiments in the low force regime. Here, we expand on the construction of the free energy of a single protein domain under force proposed by Berkovich et al. to provide a free energy landscape for N tandem domains along a continuous polypeptide. Calculation of the free energy of individual domains followed by their concatenation provides a continuous free energy landscape whose curvature is dominated by the worm-like chain at forces below 20 pN. We have validated our free energy model using Brownian dynamics and reproduce key features of protein folding. This free energy model can predict the effects of changes in the elastic properties of a multidomain protein as a consequence of biological modifications such as phosphorylation or the formation of disulfide bonds. This work lays the foundations for the modeling of tissue elasticity, which is largely determined by the properties of tandem polyproteins. Copyright © 2015. Published by Elsevier Inc.
Plasma dynamics in current sheets

International Nuclear Information System (INIS)

Bogdanov, S.Yu.; Drejden, G.V.; Kirij, N.P.; AN SSSR, Leningrad

1992-01-01

Plasma dynamics in successive stages of current sheet evolution is investigated on the base of analysis of time-spatial variations of electron density and electrodynamic force fields. Current sheet formation is realized in a two-dimensional magnetic field with zero line under the action of relatively small initial disturbances (linear regimes). It is established that in the limits of the formed sheet is concentrated dense (N e ∼= 10 16 cm -3 ) (T i ≥ 100 eV, bar-Z i ≥ 2) hot pressure of which is balanced by the magnetic action of electrodynamic forces is carried out both plasma compression in the sheet limits and the acceleration along the sheet surface from a middle to narrow side edges
Harry Potter and the Public School Library

Science.gov (United States)

DeMitchell, Todd A.; Carney, John J.

2005-01-01

For multitudes of children Harry Potter is a hero. He fights evil and stands up for his friends. However, not all adults agree. Instead, he is perceived as a threat by many. This article discusses how some adults on a school board reacted to this perceived threat. The majority of a school board voted to restrict access to Harry Potter books in the…
Uus Harry Potteri film noolib rekordeid / Kaarel Kressa

Index Scriptorium Estoniae

Kressa, Kaarel, 1983-

2010-01-01

19. novembril 2010 esilinastub Eestis Harry Potteri sarja uue filmi "Harry Potter ja surma vägised" (USA, Suurbritannia, 2010) 1. osa, režissöör David Yates. Filmi juba näinud kriitikute arvamusest. Filmi 2. osa linastub 2011. a. juulis
Pulsar current sheet C̆erenkov radiation

Science.gov (United States)

Zhang, Fan

2018-04-01

Plasma-filled pulsar magnetospheres contain thin current sheets wherein the charged particles are accelerated by magnetic reconnections to travel at ultra-relativistic speeds. On the other hand, the plasma frequency of the more regular force-free regions of the magnetosphere rests almost precisely on the upper limit of radio frequencies, with the cyclotron frequency being far higher due to the strong magnetic field. This combination produces a peculiar situation, whereby radio-frequency waves can travel at subluminal speeds without becoming evanescent. The conditions are thus conducive to C̆erenkov radiation originating from current sheets, which could plausibly serve as a coherent radio emission mechanism. In this paper we aim to provide a portrait of the relevant processes involved, and show that this mechanism can possibly account for some of the most salient features of the observed radio signals.
Spiritual Quest in the Realm of Harry Potter.

Science.gov (United States)

Radley, Gail

2003-01-01

Looks at the alternate and fantastic world of Harry Potter because it has so captured the imaginations of children and adults alike, garnering unprecedented weeks on the New York Times bestseller list. Describes many specific examples in which readers can connect and relate to the Harry Potter books. (SG)
Direct numerical simulation of free and forced square jets

International Nuclear Information System (INIS)

Gohil, Trushar B.; Saha, Arun K.; Muralidhar, K.

2015-01-01

Highlights: • Free square jet at Re = 500–2000 is studied using DNS. • Forced square jet at Re = 1000 subjected to varicose perturbation is also investigated at various forcing frequencies. • Vortex interactions within the jet and jet spreading are affected both for free and forced jets. • Perturbation at higher frequency shows axis-switching. - Abstract: Direct numerical simulation (DNS) of incompressible, spatially developing square jets in the Reynolds number range of 500–2000 is reported. The three-dimensional unsteady Navier–Stokes equations are solved using high order spatial and temporal discretization. The objective of the present work is to understand the evolution of free and forced square jets by examining the formation of large-scale structures. Coherent structures and related interactions of free jets suggest control strategies that can be used to achieve enhanced spreading and mixing of the jet with the surrounding fluid. The critical Reynolds number for the onset on unsteadiness in an unperturbed free square jet is found to be 875–900 while it reduces to the range 500–525 in the presence of small-scale perturbations. Disturbances applied at the flow inlet cause saturation of KH-instability and early transition to turbulence. Forced jet calculations have been carried out using varicose perturbation with amplitude of 15%, while frequency is independently varied. Simulations show that the initial development of the square jet is influenced by the four corners leading to the appearance hairpin structures along with the formation of vortex rings. Farther downstream, adjacent vortices strongly interact leading to their rapid breakup. Excitation frequencies in the range 0.4–0.6 cause axis-switching of the jet cross-section. Results show that square jets achieve greater spreading but are less controllable in comparison to the circular ones
Coupling of climate models and ice sheet models by surface mass balance gradients: application to the Greenland Ice Sheet

Directory of Open Access Journals (Sweden)

M. M. Helsen

2012-03-01

Full Text Available It is notoriously difficult to couple surface mass balance (SMB results from climate models to the changing geometry of an ice sheet model. This problem is traditionally avoided by using only accumulation from a climate model, and parameterizing the meltwater run-off as a function of temperature, which is often related to surface elevation (H_s. In this study, we propose a new strategy to calculate SMB, to allow a direct adjustment of SMB to a change in ice sheet topography and/or a change in climate forcing. This method is based on elevational gradients in the SMB field as computed by a regional climate model. Separate linear relations are derived for ablation and accumulation, using pairs of H_s and SMB within a minimum search radius. The continuously adjusting SMB forcing is consistent with climate model forcing fields, also for initially non-glaciated areas in the peripheral areas of an ice sheet. When applied to an asynchronous coupled ice sheet – climate model setup, this method circumvents traditional temperature lapse rate assumptions. Here we apply it to the Greenland Ice Sheet (GrIS. Experiments using both steady-state forcing and glacial-interglacial forcing result in realistic ice sheet reconstructions.
Energy of Force-Free Magnetic Fields in Relation to Coronal Mass Ejections; TOPICAL

International Nuclear Information System (INIS)

G.S. Choe; C.Z. Cheng

2002-01-01

In typical observations of coronal mass ejections (CMEs), a magnetic structure of a helmet-shaped closed configuration bulges out and eventually opens up. However, a spontaneous transition between these field configurations has been regarded to be energetically impossible in force-free fields according to the Aly-Sturrock theorem. The theorem states that the maximum energy state of force-free fields with a given boundary normal field distribution is the open field. The theorem implicitly assumes the existence of the maximum energy state, which may not be taken for granted. In this study, we have constructed force-free fields containing tangential discontinuities in multiple flux systems. These force-free fields can be generated from a potential field by footpoint motions that do not conserve the boundary normal field distribution. Some of these force-free fields are found to have more magnetic energy than the corresponding open fields. The constructed force-free configurations are compared with observational features of CME-bearing active regions. Possible mechanisms of CMEs are also discussed
Harry Potter - raamat, mis kõik enda ümber kullaks muudab

Index Scriptorium Estoniae

2007-01-01

Alates 21. juulist saab osta seitsmendat ja ühtlasi viimast J. K. Rowlingu Potteri-sarja raamatut "Harry Potter and the Deathly Hallows". Raamatu ilmumise ja äsja esilinastunud Harry Potteri viienda filmi "Harry Potter ja Fööniksi ordu" taustal kirjanik Joanne Rowlingu elust ja Potteri filmide fenomenist
Harry Potter in Translation: Making Language Learning Magical

Science.gov (United States)

Eaton, Sarah Elaine

2012-01-01

This guidebook for teachers documents the "Harry Potter in Translation" project undertaken at the Language Research Centre at the University of Calgary. The guide also offers 5 sample lesson plans for teachers of grades three to twelve for teaching world languages using the Harry Potter books in translation to engage students. (Contains…
Harry Potter murdis hääle ja armus Sex Pistolsisse / Triin Tael

Index Scriptorium Estoniae

Tael, Triin

2002-01-01

13-aastane inglise poiss Daniel Radcliffe, kes mängib Harry Potterit ka J.K. Rowling'u Harry Potteri lugude teises filmis "Harry Potter ja saladuste kamber" ("Harry Potter and the Chamber of Secrets") : režissöör Chris Columbus : Ameerika Ühendriigid 2002
Energy buildup in sheared force-free magnetic fields

Science.gov (United States)

Wolfson, Richard; Low, Boon C.

1992-01-01

Photospheric displacement of the footpoints of solar magnetic field lines results in shearing and twisting of the field, and consequently in the buildup of electric currents and magnetic free energy in the corona. The sudden release of this free energy may be the origin of eruptive events like coronal mass ejections, prominence eruptions, and flares. An important question is whether such an energy release may be accompanied by the opening of magnetic field lines that were previously closed, for such open field lines can provide a route for matter frozen into the field to escape the sun altogether. This paper presents the results of numerical calculations showing that opening of the magnetic field is permitted energetically, in that it is possible to build up more free energy in a sheared, closed, force-free magnetic field than is in a related magnetic configuration having both closed and open field lines. Whether or not the closed force-free field attains enough energy to become partially open depends on the form of the shear profile; the results presented compare the energy buildup for different shear profiles. Implications for solar activity are discussed briefly.
Harri Taliga - sotside uljas luugimees / Jaak Aab

Index Scriptorium Estoniae

Aab, Jaak, 1960-

2006-01-01

Töötajate usaldusisiku seaduse eelnõust ja ametiühingute rollist töötajate huvide kaitsmisel. Kommentaar artiklile: Taliga, Harri. Tankistist minister pistis pea luugist välja // SL Õhtuleht 20. mai 2006, lk. 8. Sama ka Põhjarannik 26. mai 2006, lk. 2 ; Meie Maa 27. mai 2006, lk. 2, pealkiri kujul : Harri Taliga - uljas tankist ; Hiiu Leht 30. mai 2006, lk. 2 ; Nädaline 20. juuni 2006, lk. 3
Harry Potter Casts His Spell in the Classroom

Science.gov (United States)

Witschonke, Christopher

2006-01-01

This article deals with the use of alternative texts, such as the Harry Potter book series in classroom teaching. In this article, the author discusses a wide range of themes that could be addressed in the classroom. Harry Potter and the Sorcerer's Stone deals with issues of greed, self-sacrifice, fear of the unknown, and self-confidence. Harry…
Understanding Harry Potter: Parallels to the Deaf World

Science.gov (United States)

Czubek, Todd A.; Greenwald, Janey

2005-01-01

Every so often there are stories that take the world by storm and make such an impact that they become part of our everyday world. These stories, characters, and themes become established elements of cultural literacy. This is exactly what has happened with J. K. Rowling's Harry Potter series. Harry and his cohort of wizards, witches, and their…
Orientation and Morphology Effects in Rapid Silicon Sheet Solidification

Science.gov (United States)

Ciszek, T. F.

1984-01-01

Radial growth anisotropies and equilibrium forms of point nucleated, dislocation free silicon sheets spreading horizontally on the free surface of a silicon melt were measured for (100), (110), (111), and (112) sheet planes. The growth process was recorded. Qualitative Wulff surface free energy polar plots were deduced from the equilibrium shapes for each sheet plane. Predicted geometries for the tip shape of unidirectional, dislocation free, horizontally grown sheets growing in various directions within the planes were analyzed. Polycrystalline sheets and dendrite propagation were analyzed. For dendrites, growth rates on the order of 2.5 m/min and growth rate anisotropies of 25 are measured.

An ice sheet model validation framework for the Greenland ice sheet

Science.gov (United States)

Price, Stephen F.; Hoffman, Matthew J.; Bonin, Jennifer A.; Howat, Ian M.; Neumann, Thomas; Saba, Jack; Tezaur, Irina; Guerber, Jeffrey; Chambers, Don P.; Evans, Katherine J.; Kennedy, Joseph H.; Lenaerts, Jan; Lipscomb, William H.; Perego, Mauro; Salinger, Andrew G.; Tuminaro, Raymond S.; van den Broeke, Michiel R.; Nowicki, Sophie M. J.

2017-01-01

We propose a new ice sheet model validation framework - the Cryospheric Model Comparison Tool (CmCt) - that takes advantage of ice sheet altimetry and gravimetry observations collected over the past several decades and is applied here to modeling of the Greenland ice sheet. We use realistic simulations performed with the Community Ice Sheet Model (CISM) along with two idealized, non-dynamic models to demonstrate the framework and its use. Dynamic simulations with CISM are forced from 1991 to 2013, using combinations of reanalysis-based surface mass balance and observations of outlet glacier flux change. We propose and demonstrate qualitative and quantitative metrics for use in evaluating the different model simulations against the observations. We find that the altimetry observations used here are largely ambiguous in terms of their ability to distinguish one simulation from another. Based on basin-scale and whole-ice-sheet-scale metrics, we find that simulations using both idealized conceptual models and dynamic, numerical models provide an equally reasonable representation of the ice sheet surface (mean elevation differences of framework demonstrates that our proposed metrics can distinguish relatively better from relatively worse simulations and that dynamic ice sheet models, when appropriately initialized and forced with the right boundary conditions, demonstrate a predictive skill with respect to observed dynamic changes that have occurred on Greenland over the past few decades. An extensible design will allow for continued use of the CmCt as future altimetry, gravimetry, and other remotely sensed data become available for use in ice sheet model validation.
Forced current sheet structure, formation and evolution: application to magnetic reconnection in the magnetosphere

Directory of Open Access Journals (Sweden)

V. I. Domrin

2004-07-01

Full Text Available By means of a simulation model, the earlier predicted nonlinear kinetic structure, a Forced Kinetic Current Sheet (FKCS, with extremely anisotropic ion distributions, is shown to appear as a result of a fast nonlinear process of transition from a previously existing equilibrium. This occurs under triggering action of a weak MHD disturbance that is applied at the boundary of the simulation box. In the FKCS, current is carried by initially cold ions which are brought into the CS by convection from both sides, and accelerated inside the CS. The process then appears to be spontaneously self-sustained, as a MHD disturbance of a rarefaction wave type propagates over the background plasma outside the CS. Comparable to the Alfvénic discontinuity in MHD, transformation of electromagnetic energy into the energy of plasma flows occurs at the FKCS. But unlike the MHD case, ``free" energy is produced here: dissipation should occur later, through particle interaction with turbulent waves generated by unstable ion distribution being formed by the FKCS action. In this way, an effect of magnetic field ``annihilation" appears, required for fast magnetic reconnection. Application of the theory to observations at the magnetopause and in the magnetotail is considered.
Discovering by Analysis: Harry Potter and Youth Fantasy.

Science.gov (United States)

Center, Emily R.

There has been a recent surge in the popularity of youth fantasy books; this can be partially attributed to the popularity of J.K. Rowling's Harry Potter series. Librarians and others who recommend books to youth are having a difficult time suggesting other fantasy books to those who have read the Harry Potter series and want to read other similar…
An ab initio approach to free-energy reconstruction using logarithmic mean force dynamics

International Nuclear Information System (INIS)

Nakamura, Makoto; Obata, Masao; Morishita, Tetsuya; Oda, Tatsuki

2014-01-01

We present an ab initio approach for evaluating a free energy profile along a reaction coordinate by combining logarithmic mean force dynamics (LogMFD) and first-principles molecular dynamics. The mean force, which is the derivative of the free energy with respect to the reaction coordinate, is estimated using density functional theory (DFT) in the present approach, which is expected to provide an accurate free energy profile along the reaction coordinate. We apply this new method, first-principles LogMFD (FP-LogMFD), to a glycine dipeptide molecule and reconstruct one- and two-dimensional free energy profiles in the framework of DFT. The resultant free energy profile is compared with that obtained by the thermodynamic integration method and by the previous LogMFD calculation using an empirical force-field, showing that FP-LogMFD is a promising method to calculate free energy without empirical force-fields
Equal-channel angular sheet extrusion of interstitial-free (IF) steel: Microstructural evolution and mechanical properties

International Nuclear Information System (INIS)

Saray, O.; Purcek, G.; Karaman, I.; Neindorf, T.; Maier, H.J.

2011-01-01

Highlights: → IF-steel sheets can successfully be processed in the continuous manner using the equal-channel angular sheet extrusion (ECASE). → The ECASE produces the microstructures including dislocation cell and micro-shear bands inside the grains with mainly low-angle grain boundaries. → The ECASE results in a considerable increase in the strength but limited ductility. → A good strength-ductility balance in the ECASE-processed IF-steel sheets can be managed with a suitable annealing parameters. - Abstract: Interstitial-free steel (IF-steel) sheets were processed at room temperature using a continuous severe plastic deformation (SPD) technique called equal-channel angular sheet extrusion (ECASE). After processing, the microstructural evolution and mechanical properties have been systematically investigated. To be able to directly compare the results with those from the same material processed using discontinuous equal channel angular extrusion, the sheets were ECASE processed up to eight passes. The microstructural investigations revealed that the processed sheets exhibited a dislocation cell and/or subgrain structures with mostly low angle grain boundaries. The grains after processing have relatively high dislocation density and intense micro-shear band formation. The electron backscattering diffraction (EBSD) examination showed that the processed microstructure is not fully homogeneous along the sheet thickness due probably to the corner angle of 120 deg. in the ECASE die. It was also observed that the strengths of the processed sheets increase with the number of ECASE passes, and after eight passes following route-A and route-C, the yield strengths reach 463 MPa and 459 MPa, respectively, which is almost 2.5 times higher than that of the initial material. However, the tensile ductility considerably dropped after the ECASE. The limited ductility was attributed to the early plastic instability in the tensile samples due to the inhomogeneous
Ballistic thermophoresis of adsorbates on free-standing graphene.

Science.gov (United States)

Panizon, Emanuele; Guerra, Roberto; Tosatti, Erio

2017-08-22

The textbook thermophoretic force which acts on a body in a fluid is proportional to the local temperature gradient. The same is expected to hold for the macroscopic drift behavior of a diffusive cluster or molecule physisorbed on a solid surface. The question we explore here is whether that is still valid on a 2D membrane such as graphene at short sheet length. By means of a nonequilibrium molecular dynamics study of a test system-a gold nanocluster adsorbed on free-standing graphene clamped between two temperatures [Formula: see text] apart-we find a phoretic force which for submicron sheet lengths is parallel to, but basically independent of, the local gradient magnitude. This identifies a thermophoretic regime that is ballistic rather than diffusive, persisting up to and beyond a 100-nanometer sheet length. Analysis shows that the phoretic force is due to the flexural phonons, whose flow is known to be ballistic and distance-independent up to relatively long mean-free paths. However, ordinary harmonic phonons should only carry crystal momentum and, while impinging on the cluster, should not be able to impress real momentum. We show that graphene and other membrane-like monolayers support a specific anharmonic connection between the flexural corrugation and longitudinal phonons whose fast escape leaves behind a 2D-projected mass density increase endowing the flexural phonons, as they move with their group velocity, with real momentum, part of which is transmitted to the adsorbate through scattering. The resulting distance-independent ballistic thermophoretic force is not unlikely to possess practical applications.
ON THE GLOBAL STRUCTURE OF PULSAR FORCE-FREE MAGNETOSPHERE

International Nuclear Information System (INIS)

Petrova, S. A.

2013-01-01

The dipolar magnetic field structure of a neutron star is modified by the plasma originating in the pulsar magnetosphere. In the simplest case of a stationary axisymmetric force-free magnetosphere, a self-consistent description of the fields and currents is given by the well-known pulsar equation. Here we revise the commonly used boundary conditions of the problem in order to incorporate the plasma-producing gaps and to provide a framework for a truly self-consistent treatment of the pulsar magnetosphere. A generalized multipolar solution of the pulsar equation is found, which, as compared to the customary split monopole solution, is suggested to better represent the character of the dipolar force-free field at large distances. In particular, the outer gap location entirely inside the light cylinder implies that beyond the light cylinder the null and critical lines should be aligned and become parallel to the equator at a certain altitude. Our scheme of the pulsar force-free magnetosphere, which will hopefully be followed by extensive analytic and numerical studies, may have numerous implications for different fields of pulsar research.
Forced and free convection hydromagnetic flow past a vertical flat plate

International Nuclear Information System (INIS)

Abdelkhalek, M.M.

2004-01-01

The effects of magnetic field and temperature heat source on the free and forced convection flow past an infinite vertical plate is studied analytically. Solutions of the reduced equation appropriate in the forced convection and free convection regime are obtained using perturbation technique. The expression for the velocity field, skin friction and Nusselt number have been obtained
Lepidoptera family-group names proposed by Thaddeus William Harris in 1841

Directory of Open Access Journals (Sweden)

Donald Lafontaine

2013-02-01

Full Text Available In 1841, T. W. Harris published “A Report on the Insects of Massachusetts, Injurious to Vegetation,” a seminal work in North American Entomology and one of the first New World publications to describe Lepidoptera species. Although appearing in several subsequent editions, the eight family-group names proposed by Harris were largely overlooked. In summarizing Harris’ family-group names, we show that authorship for two Noctuidae names in current usage require changes: Acronictinae Harris, 1841 (originally as Acronyctadae has priority over Heinemann, 1859, and Agrotini Harris, 1841 (as Agrotitidae has priority over Rambur, 1848. Mamestradae Harris, 1841 is also a senior synonym of Mamestrinae Hampson, 1902 (Type genus: Mamestra Ochsenheimer, 1816, an available name that is currently a junior subjective synonym of Noctuidae: Noctuinae: Hadenini Guenée, 1837 (Type genus: Hadena Schrank, 1802. Geometridae: Ennominae: Hyberniini Harris, 1841 (as Hyberniadae, based on Erranis Hübner, [1825] (= Hybernia Berthold, 1827, has precedence over two family-group names with long-standing usage, Bistonini Stephens, 1850 and Boarmiini Duponchel, 1845, and a reversal of precedence for the latter two names over Hyberniini is proposed under ICZN guidelines.
The Effect of Solar Forcing on the Greenland Ice Sheet during the Holocene - A Model Study

Science.gov (United States)

Bügelmayer, Marianne; Roche, Didier; Renssen, Hans

2014-05-01

Abrupt climate changes did not only happen during glacials but also during interglacials such as the Holocene. Marine sediments provide evidence for the periodic occurrence of centennial-scale events with enhanced iceberg discharge during the past 11.000 years (Bond et al., 2001). These events were chronologically linked to reduced solar activity as reconstructed using cosmogenic isotopes (Bond et al., 2001), indicating that even an external forcing that is considered to be small, has a potential impact on climate due to several feedback mechanisms (Renssen et al., 2006). The interactions between climate and solar irradiance have been investigated using numerical models (e.g. Haigh, 1996; Renssen et al, 2006), but so far without dynamically computing the Greenland ice sheet and iceberg calving. Thus, the impact of solar variations on iceberg discharge and the underlying mechanisms have not been analysed so far. To analyse the effect of variations in solar activity on the Greenland ice sheet (GIS) and the iceberg calving, as well as possible feedback mechanisms that enhance the impact of the total solar irradiance, we use the earth system model of intermediate complexity (iLOVECLIM, Roche et al., 2013), coupled to the ice sheet/ice shelf model GRISLI (Ritz et al., 2001) and to a dynamic-thermodynamic iceberg module (Jongma et al., 2009, Bügelmayer et al., 2014) to perform transient experiments of the last 6000 years. The experiments are conducted applying reconstructed atmospheric greenhouse gas concentrations, volcanic aerosol loads, orbital parameters and variations in the total solar irradiance. We present the response of the coupled model to different solar irradiance scenarios to evaluate modeled GIS sensitivity to relatively modest variations in radiative forcing. Moreover, we investigate the dependence of the model results on the chosen model sensitivity. References: Bond, G., Kromer, B., Beer, J., Muscheler, R., Evans, M. N., Showers, W., … Bonani, G
Wizarding in the Classroom: Teaching Harry Potter and Politics

Science.gov (United States)

Deets, Stephen

2009-01-01

This article describes teaching a course called Harry Potter and Politics. Focusing on aspects of political culture, the class tackled themes of identity, institutional behavior, and globalization. Teaching Harry Potter has several benefits. Students are both familiar with the wizarding world and yet have enough distance to examine it…
Harry Potter and the Terrors of the Toilet

Science.gov (United States)

Mills, Alice

2006-01-01

The Harry Potter series focuses upon the toilet as a site for heroic action and a threshold between worlds as well as a more traditional place for boys to be bullied and girls to weep. This article offers a Kristevan reading of the toilets as abject in Harry Potter, and shows how this concept helps us make sense of wider issues within the series,…
Instabilities of the force-free current configurations

Science.gov (United States)

Berseth, V.; Indenbom, M. V.; van der Beek, C. J.; Erb, A.; Walker, E.; Flükiger, R.; Benoit, W.

1996-03-01

Using the magneto-optic technique, it is shown that inductively induced force-free current configurations in high purity YBa2Cu3O7-δ single crystals become unstable above a certain well-defined amplitude and frequency of the variation of the applied perpendicular field.
Quand Nicolas Sarkozy rencontre Harry Potter.

Directory of Open Access Journals (Sweden)

Marc Dumont

2007-07-01

Full Text Available Ca y est, « il » est là, et bien de retour. Qui ça ? Harry Potter, bien sûr, depuis la nuit du 20 juillet. Et avec lui assurément le cortège de toutes les mauvaises langues qui ne manqueront pas de snober avec dédain un produit mercantile, ou de dépravation des jeunes adolescents contemporains qui ne liraient pas suffisamment de « choses sérieuses » telles que les sciences sociales. Mais avec le come back de Harry Potter, c’est aussi un nouvel épisode qui s’est joué ...
Sausage mode instability of thin current sheets as a cause of magnetospheric substorms

Directory of Open Access Journals (Sweden)

J. Büchner

Full Text Available Observations have shown that, prior to substorm explosions, thin current sheets are formed in the plasma sheet of the Earth's magnetotail. This provokes the question, to what extent current-sheet thinning and substorm onsets are physically, maybe even causally, related. To answer this question, one has to understand the plasma stability of thin current sheets. Kinetic effects must be taken into account since particle scales are reached in the course of tail current-sheet thinning. We present the results of theoretical investigations of the stability of thin current sheets and about the most unstable mode of their decay. Our conclusions are based upon a non-local linear dispersion analysis of a cross-magnetic field instability of Harris-type current sheets. We found that a sausage-mode bulk current instability starts after a sheet has thinned down to the ion inertial length. We also present the results of three-dimensional electromagnetic PIC-code simulations carried out for mass ratios up to M_i/ m_e=64. They verify the linearly predicted properties of the sausage mode decay of thin current sheets in the parameter range of interest.

Key words. Magnetospheric physics (plasma waves and instabilities; storms and substorms · Space plasma physics (magnetic reconnection
A magnetic neutral sheet as cause of the flare productivity of a delta sunspot group

International Nuclear Information System (INIS)

Seehafer, N.

1985-01-01

Flare observations in the solar activity complex HR 16862, 16863, 16864 at the end of May 1980 are compared with the structure of force-free magnetic fields calculated from photospheric magnetograph measurements. A series of homologous flares connected with a delta configuration in HR 16864 was possibly caused by a magnetic neutral sheet. The delta configuration consisted of the large preceding spot of HR 16864 and a small satellite of opposite polarity. All magnetic flux from the satellite is connected to the main spot, and at the outer edge of the satellite, away from the main spot, a magnetic neutral sheet is found. This agrees with the observation that all penumbra was situated between parent spot and satellite, which is typical of such delta configurations. It is suggested that the flare productivity of these configurations is generally caused by magnetic neutral sheets at the penumbra-free outer boundary of the satellites. (author)
[Harry Potter--the trauma as a drive for psychic development].

Science.gov (United States)

Subkowski, Peter

2004-12-01

The Harry Potter books are centered around the psychic development of a traumatised young boy starting from his internalised early experience of being loved by his mother to the sudden loss of both of his parents at the anal stage and the later cumulative traumatisation by being negleced and mistreated by his relatives up to the present times. By identifying with his father and other father replacements Harry Potter finally acquires self-assurance and wins new friends. Harry goes through different stages of initiation into the adult world with all its conflicts and rivalries but also friendships. He stands up to his fears and symptoms resulting from his early childhood traumata and thereby helps to encourage readers of all ages to handle their own conflicts. On the oedipal level Harry Potter finally has to deidealize his father and Dumbledore, but also their opponent the dark Lord Voldemort, who thereby becomes more human, understandable and in the long run probably defeatable. The reader can identify himself with Harry and/ or a wide range of other characters. He can recognize his own experiences in life and conflicts in the story and argue internally with the demonstrated conflict solving patterns on different levels. It is the skillfully displayed and logically constructed story of the psychic development of a child that is traumatised at an early age and the possibilities the reader has to identify selectively with the different characters that constitutes the attractiveness of the Harry Potter novels.
The Role of Girls as Mothers in Harry Potter Series

Directory of Open Access Journals (Sweden)

Marcelina Fransisca

2017-01-01

Full Text Available This study focuses on the role of the female characters in Harry Potter series. It aims to find out the ways the female characters, Hermione Granger, Ginny Weasley, and Luna Lovegood take a mother role for Harry, whereas they are in their teenage years. Using Barthes’ theory on myths, this study identifies that there are two myths that are in operation, the myth that girls are supposed to be mothers and the myth that mothers are supposed to protect, nurture, and educate. As the agents of the myths,the three teenage girls willingly take their role as mothers role that are assigned to them. These three female characters take their roles as mothers to Harry in how they protect, nurture, and educate Harry. In response to this, Harry also succumbs to the position of being protected, nurtured and educated by these three girls. Despite Rowling’s claims on her being a feminist when she said that “I’ve always considered myself as a feminist” (Rowling, 2011, she cannot escape the myths on girls and women. Rowling sees that being a mother is the most powerful role for girls and women
Interpretation of magnetosonic waves in the boundary regions of the plasma sheet as seen by the ISEE 3 spacecraft

International Nuclear Information System (INIS)

Smith, P.R.; Hopcraft, K.I.; Murphy, N.

1987-01-01

Recent calculations that derive the normal-mode spectrum of an idealized magnetic current sheet are discussed. The Harris neutral-sheet equilibrium is perturbed with an ideal MHD displacement. The longitudinal polarization of the fundamental modes is calculated as a function of the position in the sheet. Using data from the energetic-ion instrument aboard ISEE 3, the thickness of the plasma sheet in the deep geomagnetic tail is estimated. This parameter enables a quantitative comparison between the boundary oscillations reported by Tsurutani and Smith (1984) and the normal mode oscillations derived by Hopcraft and Smith (1985) to be performed. The normal-mode solutions are found to be consistent with observation. Further aspects of the MHD wave spectrum that may lead to an observable variation of the mode character across the boundary of the plasma sheet are pointed out. 12 references
The Topology and Properties of Mercury's Tail Current Sheet

Science.gov (United States)

Al Asad, M.; Johnson, C.; Philpott, L. C.

2017-12-01

current sheet, we observed that many TCS crossings exhibit the magnetic characteristics of a bifurcated current sheet rather than a typical Harris-type structure. In fact, we found that more TCS encounters can be classified as bifurcated (34%) than Harris-like (15%). This suggests the bifurcated TCS structure may be more stable and common in Mercury's magnetosphere than at Earth.

Free-Standing GaMnAs Nanomachined Sheets for van der Pauw Magnetotransport Measurements

Directory of Open Access Journals (Sweden)

Jae-Hyun Lee

2016-12-01

Full Text Available We report on the realization of free-standing GaMnAs epilayer sheets using nanomachining techniques. By optimizing the growth conditions of the sacrificial Al0.75Ga0.25As layer, free-standing metallic GaMnAs (with ~6% Mn microsheets (with TC ~85 K with integrated electrical probes are realized for magnetotransport measurements in the van der Pauw geometry. GaMnAs epilayer needs to be physically isolated to avoid buckling effects stemming from the release of lattice mismatch strain during the removal of the AlGaAs sacrificial layer. From finite element analysis, symmetrically placed and serpentine-shaped electrical leads induce minimal thermal stress at low temperatures. From magnetotransport measurements, changes in magnetic anisotropy are readily observed.
Harris Recurrence and MCMC: A Simplified Approach

DEFF Research Database (Denmark)

Asmussen, Søren; Glynn, Peter W.

A key result underlying the theory of MCMC is that any η-irreducible Markov chain having a transition density with respect to η and possessing a stationary distribution is automatically positive Harris recurrent. This paper provides a short self-contained proof of this fact.......A key result underlying the theory of MCMC is that any η-irreducible Markov chain having a transition density with respect to η and possessing a stationary distribution is automatically positive Harris recurrent. This paper provides a short self-contained proof of this fact....
Instabilities of collisionless current sheets: Theory and simulations

International Nuclear Information System (INIS)

Silin, I.; Buechner, J.; Zelenyi, L.

2002-01-01

The problem of Harris current sheet stability is investigated. A linear dispersion relation in the long-wavelength limit is derived for instabilities, propagating in the neutral plane at an arbitrary angle to the magnetic field but symmetric across the sheet. The role of electrostatic perturbations is especially investigated. It appears, that for the tearing-mode instability electrostatic effects are negligible. However, for obliquely propagating modes the modulation of the electrostatic potential φ is essential. In order to verify the theoretical results, the limiting cases of tearing and sausage instabilities are compared to the two-dimensional (2D) Vlasov code simulations. For tearing the agreement between theory and simulations is good for all mass ratios. For sausage-modes, the theory predicts fast stabilization for mass ratios m i /m e ≥10. This is not observed in simulations due to the diminishing of the wavelength for higher mass ratios, which leads beyond the limit of applicability of the theory developed here
Two new supersymmetric equations of Harry Dym type and their supersymmetric reciprocal transformations

International Nuclear Information System (INIS)

Tian, Kai; Liu, Q.P.

2012-01-01

A new N=1 supersymmetric Harry Dym equation is constructed by applying supersymmetric reciprocal transformation to a trivial supersymmetric Harry Dym equation, and its recursion operator and Lax formulation are also obtained. Within the framework of symmetry approach, a class of 3rd order supersymmetric equations of Harry Dym type are considered. In addition to five known integrable equations, a new supersymmetric equation, admitting 5th order generalized symmetry, is shown to be linearizable through supersymmetric reciprocal transformation. Furthermore, its Lax representation and recursion operator are given so that the integrability of this new equation is confirmed. -- Highlights: ► A new supersymmetric Harry Dym equation is constructed through supersymmetric reciprocal transformations. ► The recursion operator and Lax formulation are established for the new supersymmetric Harry Dym equation. ► A supersymmetric equation of Harry Dym type is shown to be linearized through supersymmetric reciprocal transformation.
Harry Potter as a Context for Problem Based-Learning

Science.gov (United States)

Beaton, M.J.

2004-01-01

Reading Harry Potter aloud to the class one autumn sparked the students imaginations and also the authors'. As a result, that semester the author designed and taught a thematic unit based on Harry Potter. The students were able to identify with the 11-year old wizard and his adventures in a strange new world. In mathematics, language arts, and…
The Response of Ice Sheets to Climate Variability

Science.gov (United States)

Snow, K.; Goldberg, D. N.; Holland, P. R.; Jordan, J. R.; Arthern, R. J.; Jenkins, A.

2017-12-01

West Antarctic Ice Sheet loss is a significant contributor to sea level rise. While the ice loss is thought to be triggered by fluctuations in oceanic heat at the ice shelf bases, ice sheet response to ocean variability remains poorly understood. Using a synchronously coupled ice-ocean model permitting grounding line migration, this study evaluates the response of an ice sheet to periodic variations in ocean forcing. Resulting oscillations in grounded ice volume amplitude is shown to grow as a nonlinear function of ocean forcing period. This implies that slower oscillations in climatic forcing are disproportionately important to ice sheets. The ice shelf residence time offers a critical time scale, above which the ice response amplitude is a linear function of ocean forcing period and below which it is quadratic. These results highlight the sensitivity of West Antarctic ice streams to perturbations in heat fluxes occurring at decadal time scales.
The Tlonic World of Harry Potter: An Idealistic Version of Magical World

Directory of Open Access Journals (Sweden)

Bahee Hadaegh

2016-01-01

Full Text Available Considered as literary pieces of fantasy and secondarily a possible version of magic realism, J.K. Rowling’s seven Harry Potter (1997-2007 novels have been involving the readers of different age groups and succeeded in unleashing the target imagination. Taking into account the different probable associations, it is of novelty to draw comparisons between the magical world of Harry Potter (1997-2007 and that of Tlon in Jorge Luis Borges’ short story “Tlon, Uqbar, Orbis, Tertius" (1941. In both worlds there exist images and implied notions that serve to naturalize the supernatural and to blur the line between the real and the imaginary. Making use of Berkeleyan theory of idealism, the power of mind is emphasized upon due to its capability of bringing into existence any object, concept or incident that seems materially and logically impossible. Meanwhile, an abstract force that is Love is highlighted in the novels that could be assumed as functioning like the omniscient God of Berkeley holding the universe together with its mere presence. Therefore, a new perspective in discovering a truth of life would be dragged into view as a result of the products of one’s mind.
Topological and statistical properties of nonlinear force-free fields

Science.gov (United States)

Mangalam, A.; Prasad, A.

2018-01-01

We use our semi-analytic solution of the nonlinear force-free field equation to construct three-dimensional magnetic fields that are applicable to the solar corona and study their statistical properties for estimating the degree of braiding exhibited by these fields. We present a new formula for calculating the winding number and compare it with the formula for the crossing number. The comparison is shown for a toy model of two helices and for realistic cases of nonlinear force-free fields; conceptually the formulae are nearly the same but the resulting distributions calculated for a given topology can be different. We also calculate linkages, which are useful topological quantities that are independent measures of the contribution of magnetic braiding to the total free energy and relative helicity of the field. Finally, we derive new analytical bounds for the free energy and relative helicity for the field configurations in terms of the linking number. These bounds will be of utility in estimating the braided energy available for nano-flares or for eruptions.
Inverse Magnus force in free molecular flow

Science.gov (United States)

Herczynski, A.; Weidman, P.

2003-11-01

The sidewise force on a spinning sphere translating in a rarified gas is calculated assuming that the flow can be treated as a stream of free molecules. This approach was first introduced by Newton in his investigation of the drag force. While it is not fruitful at subsonic flows in normal conditions, it gives remarkably accurate results at hypersonic speeds. Here it is applied to the high Knudsen number flow over spinning spheres, cylinders, cubes and more generally any spinning parallelepiped. In all cases, the force is in the opposite direction to that of the classical Magnus effect in continuum flow. The simple calculation for a sphere reproduces the isothermal result obtained recently by Borg, et al. (Phys. Fluids, 15, 2003) using Maxwellian distribution functions. For any parallelepiped, including the cube, just like for the sphere and the cylinder, the force is shown to be steady. In each of these, the magnitude of the inverse Magnus force is proprtional to the product of the angular speed, translational speed, and the mas of the gas displaced by the object.
Understanding Harry Potter: parallels to the deaf world.

Science.gov (United States)

Czubek, Todd A; Greenwald, Janey

2005-01-01

Every so often there are stories that take the world by storm and make such an impact that they become part of our everyday world. These stories, characters, and themes become established elements of cultural literacy. This is exactly what has happened with J. K. Rowling's Harry Potter series. Harry and his cohort of wizards, witches, and their adventures have become an indispensable part of popular literature and popular culture. We have developed an innovative way to ensure that Deaf children, their families, and anyone studying literature (Deaf or general) gain a deeper understanding of this phenomenon. In fact, we go further by demonstrating how using a Deaf Lens provides the greatest insight into the fascinating world of Harry Potter. Utilizing a Deaf Studies Template and a Deaf Lens, we capitalize on the experiences of Deaf people everywhere while celebrating the valuable role American Sign Language has in academic programming.
Optimized Free Energies from Bidirectional Single-Molecule Force Spectroscopy

Science.gov (United States)

Minh, David D. L.; Adib, Artur B.

2008-05-01

An optimized method for estimating path-ensemble averages using data from processes driven in opposite directions is presented. Based on this estimator, bidirectional expressions for reconstructing free energies and potentials of mean force from single-molecule force spectroscopy—valid for biasing potentials of arbitrary stiffness—are developed. Numerical simulations on a model potential indicate that these methods perform better than unidirectional strategies.
Object relations in Harry Potter.

Science.gov (United States)

Lake, Suzanne

2003-01-01

Good fiction helps children address their emotional dilemmas by evoking repressed content, and offering strategies and meaningful values that help them work towards resolutions. Because certain fundamental conflicts continue to be revisited and reworked throughout adulthood, it follows that masterful children's literature might enthrall adults as well. Given the extraordinary, worldwide success of the Harry Potter stories with both children and adults, it might be inferred that they, indeed, are among such literature. Common object relations themes, as well as other intrapsychic processes, are presented in such an imaginative and resonant way that the unconscious is readily engaged. The character of Harry Potter, specifically, embodies such universal (repressed) torments as the agony of destroying and losing the mother; the ominous perception of good and bad objects at war within the self; and the earnest reparative efforts offered to save the self from eternal separation from the beloved other.
Harry Potter: Konsumsi dan Pemujaan Komoditas Dunia Sihir (Kajian Media dalam Perspektif Marxis

Directory of Open Access Journals (Sweden)

Ruth Malau

2013-07-01

Full Text Available Harry Potter, the book and film series are form of celebration of the magic world commodities. Media then took place as an amplifier that bringing the magic worlds as a part embodied in our real world. Magic commodity consumption turns out with a magically success. Youth in different parts of world named themself as the generation of Harry Potter. The existance of Harry Potter has become a fetishism consumption, but activated so many Marxism critique about inequality and materialism, while consuming and celebrating the cultural industry of Harry Potter.
Pressure anisotropy and radial stress balance in the Jovian neutral sheet

Science.gov (United States)

Paranicas, C. P.; Mauk, B. H.; Krimigis, S. M.

1991-01-01

By examining particle and magnetic field data from the Voyager 1 and 2 spacecraft, signatures were found indicating that the (greater than about 28 keV) particle pressure parallel to the magnetic field is greater than the pressure perpendicular to the field within the nightside neutral sheet (three nightside neutral sheet crossings, with favorable experimental conditions, were used). By incorporating the pressure anisotropy into the calculation of radial forces within the hightside neutral sheet, it is found that (1) force balance is approximately achieved and (2) the anisotropy force term provides the largest contribution of the other particle forces considered (pressure gradients and the corotation centrifugal force). With regard to the problem of understanding the balance of radial forces within the dayside neutral sheet (McNutt, 1984; Mauk and Krimigis, 1987), the nightside pressure anisotropy force is larger than the dayside pressure gradient forces at equivalent radial distances; however, a full accounting of the dayside regions remains to be achieved.
Streaming Scholarship: Using Fan Vids to Teach "Harry Potter"

Science.gov (United States)

Winters, Sarah Fiona

2013-01-01

This article argues that Harry Potter fan vids can be used in the classroom as works of secondary criticism about J. K. Rowling's primary text. It makes two claims: the first is that vids can be read as criticism of a particular text (in this case Harry Potter) alongside other critical essays on that text; the second is that the practice of…
A Modified Harris Corner Detection for Breast IR Image

Directory of Open Access Journals (Sweden)

Chia-Yen Lee

2014-01-01

Full Text Available Harris corner detectors, which depend on strong invariance and a local autocorrelation function, display poor detection performance for infrared (IR images with low contrast and nonobvious edges. In addition, feature points detected by Harris corner detectors are clustered due to the numerous nonlocal maxima. This paper proposes a modified Harris corner detector that includes two unique steps for processing IR images in order to overcome the aforementioned problems. Image contrast enhancement based on a generalized form of histogram equalization (HE combined with adjusting the intensity resolution causes false contours on IR images to acquire obvious edges. Adaptive nonmaximal suppression based on eliminating neighboring pixels avoids the clustered features. Preliminary results show that the proposed method can solve the clustering problem and successfully identify the representative feature points of IR breast images.
Anomalous resistivity due to kink modes in a thin current sheet

International Nuclear Information System (INIS)

Moritaka, Toseo; Horiuchi, Ritoku; Ohtani, Hiroaki

2007-01-01

The roles of microscopic plasma instabilities on the violation of the frozen-in constraint are investigated by examining the force balance equation based on explicit electromagnetic particle simulation for a thin current sheet. Wave-particle interactions associated with lower hybrid drift instability and drift kink instability (DKI) contribute to the wavy electric force term at the periphery of the current sheet and the wavy magnetic force term at the neutral sheet, respectively. In the linear growing phase of DKI, the wavy magnetic force term balances with the electric force term due to the dc electric field at the neutral sheet. It is concluded that the growth of DKI can create anomalous resistivity and result in the violation of the frozen-in constraint as well as the diffusion of current density
Trapping of point defects and segregation at the free surfaces of a metal sheet under irradiation

International Nuclear Information System (INIS)

Sarce, Alicia

2003-01-01

The migration of irradiation produced vacancies and interstitials to the free surfaces of a sheet of thickness d (pure metal and binary alloys AB of hcp structure) is calculated. For alloys, the irradiation temperature when no segregation exists (critical temperature) is obtained. The anisotropy of the diffusion of point defects in the hcp lattice is explicitly included in the calculations. (author)
Forced convective heat transfer in boundary layer flow of Sisko fluid over a nonlinear stretching sheet.

Science.gov (United States)

Munir, Asif; Shahzad, Azeem; Khan, Masood

2014-01-01

The major focus of this article is to analyze the forced convective heat transfer in a steady boundary layer flow of Sisko fluid over a nonlinear stretching sheet. Two cases are studied, namely (i) the sheet with variable temperature (PST case) and (ii) the sheet with variable heat flux (PHF case). The heat transfer aspects are investigated for both integer and non-integer values of the power-law index. The governing partial differential equations are reduced to a system of nonlinear ordinary differential equations using appropriate similarity variables and solved numerically. The numerical results are obtained by the shooting method using adaptive Runge Kutta method with Broyden's method in the domain[Formula: see text]. The numerical results for the temperature field are found to be strongly dependent upon the power-law index, stretching parameter, wall temperature parameter, material parameter of the Sisko fluid and Prandtl number. In addition, the local Nusselt number versus wall temperature parameter is also graphed and tabulated for different values of pertaining parameters. Further, numerical results are validated by comparison with exact solutions as well as previously published results in the literature.
Harry Potter (II): Intertekstualiteit en literêre genres in die reeks ...

African Journals Online (AJOL)

Finally, it is shown that the books are a typical school series combination and that they can be read as such. Keywords: Harry Potter; evaluation criteria; intertextuality; fantasy; Gothic novel; school series; critical literacy. Sleutelwoorde: Harry Potter; beoordelingskriteria; intertekstualiteit; fantasie; Gotiese spanningsverhaal, ...

Kinetic instabilities in relativistic plasmas: the Harris instability revisited

International Nuclear Information System (INIS)

Tautz, R.C.

2008-01-01

Plasma instabilities that generate aperiodic fluctuations are of outstanding importance in the astrophysical context. Two prominent examples are the electromagnetic Weibel instability and the electrostatic Harris instability, which operate in initially non-magnetized and magnetized plasmas, respectively. In this talk, the original formulation of the Harris instability will be reviewed and generalizations will be presented such as the inclusion of (1) relativistic effects, (2) ion effects, and (3) mode coupling. It will be shown that, with these modifications, a powerful method has been developed for the determination of both the existence and the growth rate of low-frequency instabilities. Applications can be found in astrophysical jets, where the rest frame can be used and so no parallel motion is present. At the end of the talk, how the particle composition of gamma-ray burst jets can be predicted using the Harris technique. (author)
Cogging force investigation of a free piston permanent magnet linear generator

Science.gov (United States)

Abdalla, I. I.; Zainal, A. E. Z.; Ramlan, N. A.; Firmansyah; Aziz, A. R. A.; Heikal, M. R.

2017-10-01

Better performance and higher efficiency of the vehicles can be achieved by using free piston engine, in which the piston is connected directly to the linear generator and waiving of any mechanical means. The free piston engine has the ability to overcome or reduce many of the challenges, such as the carbon dioxide (CO2) emission and fossil fuel consumption. The cogging force produces undesired vibration and acoustic noise in the generator. However, the cogging force must be minimized as much as possible, in order to have a high performance. This paper studies the effects of ferromagnetic materials on the cogging force of the permanent magnet linear generator (PMLG) to be used in a free piston engine using nonlinear finite-element analysis (FEA) under ANSYS Maxwell. The comparisons have been established for the cogging force of the PMLG under various translator velocities and three different ferromagnetic materials for the stator core, namely, Silicon Steel laminations, Mild Steel and Somaloy. It has been shown that the PMLG with a stator core made of Somaloy has a lower cogging force among them. Furthermore, the induced voltage of the PMLG at different accelerations has been studied. It is found that the PMLG with Mild Steel and Somaloy, respectively give larger induced voltage. Moreover, as the translator speed increase the induced voltage increased.
Harry, kes vallutab maailma / Jaanus Noormets

Index Scriptorium Estoniae

Noormets, Jaanus

2001-01-01

Joanne Rowling'u lasteraamatu "Harry Potter ja Tarkade kivi" ekraniseeringu esilinastus Eestis on 21. detsembril Coca-Cola Plazas. Selle USA filmi režissöör on Chris Columbus ja peaosas 12-aastane Daniel Radcliffe
Effectiveness of Rotation-free Triangular and Quadrilateral Shell Elements in Sheet-metal Forming Simulations

International Nuclear Information System (INIS)

Brunet, M.; Sabourin, F.

2005-01-01

This paper is concerned with the effectiveness of triangular 3-node shell element without rotational d.o.f. and the extension to a new 4-node quadrilateral shell element called S4 with only 3 translational degrees of freedom per node and one-point integration. The curvatures are computed resorting to the surrounding elements. Extension from rotation-free triangular element to a quadrilateral element requires internal curvatures in order to avoid singular bending stiffness. Two numerical examples with regular and irregular meshes are performed to show the convergence and accuracy. Deep-drawing of a box, spring-back analysis of a U-shape strip sheet and the crash simulation of a beam-box complete the demonstration of the bending capabilities of the proposed rotation-free triangular and quadrilateral elements
Fugle og andre observationer på Lewis og Harris

DEFF Research Database (Denmark)

Provencal, Philippe

2017-01-01

En beskrivelse af observationer af især fugle men også nogle få pattedyr på øen Lewis and Harris i de Ydre Hebrider. Observationerne fandt sted fra den 19. til den 23- april 2017.......En beskrivelse af observationer af især fugle men også nogle få pattedyr på øen Lewis and Harris i de Ydre Hebrider. Observationerne fandt sted fra den 19. til den 23- april 2017....
Notas sobre o Problema anterior e Harry Potter vai às compras

OpenAIRE

Silva, Jorge Nuno

2015-01-01

Harry Potter desloca-se a Hogsmeade, mais precisamente a uma loja em Diagon Alley, com a intenção de comprar uma vassoura, uma boa vassoura para a prática do Quidditch. Harry muniu-se de quantidade ilimitada de Galleons de ouro, de Sickles de prata e de Knuts de bronze. Relembremos que 1 Galleon = 17 Sickles, 1 Sickle = 29 Knuts. De quantas formas pode Harry pagar uma vassoura que custa n Sickles usando todas as possíveis combinações de moedas?
Measurement of OH free radical in magnetized sheet plasma crossed with vertical gas-flow by laser-induced fluorescence spectroscopy

International Nuclear Information System (INIS)

Tonegawa, Akira; Takatori, Masahiko; Kobayashi, Yukihiro; Kawamura, Kazutaka; Takayama, Kazuo

1997-01-01

We demonstrated the production of OH free radicals in an argon magnetized sheet plasma crossed with vertical gas-flow mixed with an oxygen gas O 2 and a hydrogen gas H 2 . The density and the rotational-vibrational temperature of the OH free radicals were measured by a laser-induced fluorescence (LIF). The density of OH free radicals increases with increasing O 2 gas-flow, while the high energy part of the electron-energy-distribution-function f e (E) above 8 eV decreases. These results suggest the high energy part of f e (E) is contributed to the dissociation of O 2 and the production of OH free radicals. (author)
Fabrication of oxide-free graphene suspension and transparent thin films using amide solvent and thermal treatment

International Nuclear Information System (INIS)

Oh, Se Young; Kim, Sung Hwan; Chi, Yong Seung; Kang, Tae Jin

2012-01-01

Graphical abstract: New methodology for suspended graphene sheets of high-quality (oxide-free), high-yield (high concentration) using amide solvent exfoliation and thermal treatment at 800 °C. We confirmed that the van der Waals force between the graphene layers decreases as increasing thermal treatment temperatures as shown XRD data (b). Highlights: ► Propose of new methodology to prepare oxide-free graphene sheets suspension. ► The graphene suspension concentration is enhanced by thermal treatment. ► Decrease of van der Waals force between the graphene layers by high temperature and pressure. ► This method has the potential as technology for mass production. ► It could be applied in transparent and flexible electronic devices. - Abstract: High quality graphene sheets were produced from graphite by liquid phase exfoliation using N-methyl-2-pyrrolidone (NMP) and a subsequent thermal treatment to enhance the exfoliation. The exfoliation was enhanced by treatment with organic solvent and high thermal expansion producing high yields of the high-quality and defect-free graphene sheets. The graphene was successfully deposited on a flexible and transparent polymer film using the vacuum filtration method. SEM images of thin films of graphene treated at 800 °C showed uniform structure with no defects commonly found in films made of graphene produced by other techniques. Thin films of graphene prepared at higher temperatures showed superior transmittance and conductivity. The sheet-resistance of the graphene film treated at 800 °C was 2.8 × 10 3 kΩ/□ with 80% transmittance.
Nonparaxial Bessel and Bessel–Gauss pincers light-sheets

Energy Technology Data Exchange (ETDEWEB)

Mitri, F.G., E-mail: F.G.Mitri@ieee.org

2017-01-23

Highlights: • Bessel and Bessel–Gauss autofocusing light sheets (i.e. beams in 2D) are developed. • The light-sheets are synthesized based on the angular spectrum decomposition method. • Computations of the scattering, radiation force and torque benefit from the solutions. - Abstract: Nonparaxial optical Bessel and Bessel–Gauss pincers optical-sheets are introduced based upon the angular spectrum decomposition in plane waves. The angular spectrum function and the beam-shape coefficients are expressed by means of improper integrals computed numerically. The radiated component of the electric field is also evaluated, displaying unique features of the nonparaxial Bessel pincers light-sheets. This new type of auto-focusing light-sheets finds potential applications in the development of novel methods in optical light-sheet tweezers for particle manipulation in opto-fluidics, particle sizing and imaging. Numerical predictions for the scattering, radiation force and torque, and particle dynamics also benefit from the developed beam solution.
Nonparaxial Bessel and Bessel–Gauss pincers light-sheets

International Nuclear Information System (INIS)

Mitri, F.G.

2017-01-01

Highlights: • Bessel and Bessel–Gauss autofocusing light sheets (i.e. beams in 2D) are developed. • The light-sheets are synthesized based on the angular spectrum decomposition method. • Computations of the scattering, radiation force and torque benefit from the solutions. - Abstract: Nonparaxial optical Bessel and Bessel–Gauss pincers optical-sheets are introduced based upon the angular spectrum decomposition in plane waves. The angular spectrum function and the beam-shape coefficients are expressed by means of improper integrals computed numerically. The radiated component of the electric field is also evaluated, displaying unique features of the nonparaxial Bessel pincers light-sheets. This new type of auto-focusing light-sheets finds potential applications in the development of novel methods in optical light-sheet tweezers for particle manipulation in opto-fluidics, particle sizing and imaging. Numerical predictions for the scattering, radiation force and torque, and particle dynamics also benefit from the developed beam solution.
SIMS of transfer ribonucleic acid molecules encapsulated between free-standing graphene sheets.

Science.gov (United States)

Verkhoturov, Dmitriy S; Geng, Sheng; Verkhoturov, Stanislav V; Kim, Hansoo; Schweikert, Emile A

2016-06-01

In this study, the authors used cluster-secondary ion mass spectrometry method to investigate the preserved transfer ribonucleic acid (tRNA) encapsulated between two free-standing graphene sheets. Single impacts of 50 keV C60 (2+) projectiles generated the emission of tRNA fragment ions in the transmission direction for mass selection and detection in a time-of-flight mass spectrometer. Ribonucleic acid (RNA) is extremely unstable and prone to rapid enzymatic degradation by ribonucleases. Employing graphene to isolate RNA from the environment, the authors prevent the aforementioned process. Encapsulation was achieved by drop casting a solution of tRNA, prepared using deuterated water, onto one graphene sheet and covering it with another. The event-by-event bombardment/detection mode allowed us to use colocalization analysis method to characterize the tRNA and its immediate environment. The authors found that upon drying, tRNA agglomerated into nanostructures ∼60 nm in diameter via formation and subsequent drying of aqua cells. The tRNA nanoagglomerates had a density of ∼42 structures per μm(2) with coverage of ∼12% of the surface area. In addition, trace amounts of water remained mostly around the tRNA nanoagglomerates, probably in the form of hydration.
Life spans of a Bellman-Harris branching process with immigration

International Nuclear Information System (INIS)

Badalbaev, I.S.; Mashrabbaev, A.

1987-01-01

One considers two schemes of the Bellman-Harris process with immigration when a) the lifetime of the particles is an integral-valued random variable and the immigration is defined by a sequence of independent random variables; b) the distribution of the lifetime of the particles is nonlattice and the immigration is a process with continuous time. One investigates the properties of the life spans of such processes. The results obtained here are a generalization to the case of Bellman-Harris processes of the results of A.M. Zubkov, obtained for Markov branching processes. For the proof one makes use in an essential manner of the known inequalities of Goldstein, estimating the generating function of the Bellman-Harris process in terms of the generating functions of the imbedded Galton-Watson process
Generalized lower-hybrid drift instabilities in current-sheet equilibrium

International Nuclear Information System (INIS)

Yoon, Peter H.; Lui, Anthony T. Y.; Sitnov, Mikhail I.

2002-01-01

A class of drift instabilities in one-dimensional current-sheet configuration, i.e., classical Harris equilibrium, with frequency ranging from low ion-cyclotron to intermediate lower-hybrid frequencies, are investigated with an emphasis placed on perturbations propagating along the direction of cross-field current flow. Nonlocal two-fluid stability analysis is carried out, and a class of unstable modes with multiple eigenstates, similar to that of the familiar quantum mechanical potential-well problem, are found by numerical means. It is found that the most unstable modes correspond to quasi-electrostatic, short-wavelength perturbations in the lower-hybrid frequency range, with wave functions localized at the edge of the current sheet where the density gradient is maximum. It is also found that there exist quasi-electromagnetic modes located near the center of the current sheet where the current density is maximum, with both kink- and sausage-type polarizations. These modes are low-frequency, long-wavelength perturbations. It turns out that the current-driven modes are low-order eigensolutions while the lower-hybrid-type modes are higher-order states, and there are intermediate solutions between the two extreme cases. Attempts are made to interpret the available simulation results in light of the present eigenmode analysis
Wide sense one-dependent processes with embedded Harris chains and their applications in inventory management

NARCIS (Netherlands)

E.M. Bazsa-Oldenkamp; P. den Iseger

2003-01-01

textabstractIn this paper we consider stochastic processes with an embedded Harris chain. The embedded Harris chain describes the dependence structure of the stochastic process. That is, all the relevant information of the past is contained in the state of the embedded Harris chain. For these
Marko ja Kaido Tallinnas / Harry Liivrand

Index Scriptorium Estoniae

Liivrand, Harry, 1961-

2003-01-01

Viviann Napa galeriis (senine Galerie Passage) Harry Liivranna kureeritud Kaido Ole ja Marko Mäetamme näitus "Design Jet 5000". Kunstnikud on viinud Veneetsia biennaalil eksponeeritud kosmoseteemalised maalid digitrüki tehnikasse ning liitnud sarjaga oma Veneetsia näituse kataloogi illustratsioonid
Free energy simulations with the AMOEBA polarizable force field and metadynamics on GPU platform.

Science.gov (United States)

Peng, Xiangda; Zhang, Yuebin; Chu, Huiying; Li, Guohui

2016-03-05

The free energy calculation library PLUMED has been incorporated into the OpenMM simulation toolkit, with the purpose to perform enhanced sampling MD simulations using the AMOEBA polarizable force field on GPU platform. Two examples, (I) the free energy profile of water pair separation (II) alanine dipeptide dihedral angle free energy surface in explicit solvent, are provided here to demonstrate the accuracy and efficiency of our implementation. The converged free energy profiles could be obtained within an affordable MD simulation time when the AMOEBA polarizable force field is employed. Moreover, the free energy surfaces estimated using the AMOEBA polarizable force field are in agreement with those calculated from experimental data and ab initio methods. Hence, the implementation in this work is reliable and would be utilized to study more complicated biological phenomena in both an accurate and efficient way. © 2015 Wiley Periodicals, Inc. © 2015 Wiley Periodicals, Inc.
Mathematical Adventures with Harry Potter

Science.gov (United States)

Wagner, Meaghan M.; Lachance, Andrea

2004-01-01

The current popularity of the Harry Potter books (Rowling 1998, 1999a, 1999b, 2000, 2003) gives teachers a new and unique opportunity to integrate literature with mathematics. Often, books that are connected to mathematical explorations are picture books, which teachers can read easily in one sitting to a group of children. The books in the Harry…
Soliton solutions of the (2 + 1)-dimensional Harry Dym equation via Darboux transformation

International Nuclear Information System (INIS)

Halim, A.A.

2008-01-01

This work introduces solitons solutions for the (2 + 1)-dimensional Harry Dym equation using Darboux transformation. The link between the (2 + 1)-dimensional Harry Dym equation and the linear system associated with the modified Kadomtzev-Patvishvili equation is used. Namely, soliton solutions for the linear system associated with the later equation are produced using Darboux transformation. These solutions are inserted in the mentioned link to produce soliton solutions for the (2 + 1)-dimensional Harry Dym equation
CT imaging vs. traditional radiographic imaging for evaluating Harris Lines in tibiae

DEFF Research Database (Denmark)

Primeau, Charlotte; Jakobsen, Lykke Schrøder; Lynnerup, Niels

2016-01-01

This paper is the first to systematically investigate computer tomography (CT) images vs. ordinary flat plane radiography for evaluating Harris Lines (HL) on tibiae. Harris Lines are traditionally investigated using radiographic images and recorded as either present or absent, or by counting...
Oscillations of spherical fullerenes interacting with graphene sheet

Energy Technology Data Exchange (ETDEWEB)

Ghavanloo, Esmaeal, E-mail: ghavanloo@shirazu.ac.ir; Fazelzadeh, S. Ahmad

2017-01-01

In the present study, the oscillations of spherical fullerenes in the vicinity of a fully constrained graphene sheet are investigated. Using the continuous approximation and Lennard-Jones potential, the van der Waals (vdW) potential energy and interaction forces are obtained. The equation of motion is derived and directly solved based on the actual force distribution between the fullerene molecules and the graphene sheet. Numerical results are obtained and shown that the oscillation is sensitive to the size of the fullerene as well as the distance between the center of the fullerene and the graphene sheet.

Enzyme-free electrochemical immunosensor configured with Au-Pd nanocrystals and N-doped graphene sheets for sensitive detection of AFP.

Science.gov (United States)

Zhao, Lifang; Li, Songjun; He, Jing; Tian, Guihong; Wei, Qin; Li, He

2013-11-15

A novel electrochemical immunosensor capable of enzyme-free detection of alpha fetoprotein (AFP) is reported. This immunosensor was fabricated in a sandwich-like format where catalytic Au-Pd nanocrystals and highly conductive N-doped graphene sheets were incorporated. The significant catalysis by Au-Pd nanocrystals toward hydrogen peroxide, along with the increased electron transfer by graphene sheets, caused signal generation and increased sensitivity, which enables the enzyme-free detection of AFP. With a low detection limit at 0.005 ng mL(-1), this novel immunosensor worked well over the broad linear range of 0.05-30 ng mL(-1). Unlike previously reported enzyme-based electrochemical immunosensors, which often involve the complicated steps for enzyme loading and necessary treatments to keep the activity of enzyme, this novel immunosensor is simple in nature and employed catalytic Au-Pd nanoparticles and highly conductive graphene, which thus enables reliable and sensitive detection for clinic usage. Copyright © 2013 Elsevier B.V. All rights reserved.
Piers Harris and Coopersmith Measure of Self-Esteem: A Comparative Analysis

Science.gov (United States)

Lynch, Mervin D.; Foley-Peres, Kathleen D.; Sullivan, Stefanie S.

2008-01-01

The purposes of this study were to see if the items from the Piers Harris Self Concept Scale and the Coopersmith Self Esteem Inventory had construct and predictive validity. Items used in this study were 50 items from the Coopersmith Self-Esteem Inventory and 80 items from the Piers Harris Self-Concept Scale. Construct measures were obtained using…
¿Por qué Harry Potter?

Directory of Open Access Journals (Sweden)

Hernán Rodríguez Castelo

2015-01-01

Full Text Available Harry Potter es el fenómeno más notable en el campo de la literatura infantil y juvenil de finales del siglo XX y XXI, dice el autor y presenta un análisis y crítica del mismo.
Decentring the Wizard: An Analysis of the Constructed Discourses of Animality in the Harry Potter Series

OpenAIRE

Haugann, Martine Juritzen

2015-01-01

This thesis seeks to explore the way constructions of animality present problematic discourses of race, gender and human ethnic groups in the Harry Potter series. This is done with special emphasis on the third novel, Harry Potter and the Prisoner of Azkaban, the fifth, Harry Potter and the Order of the Phoenix, and the seventh, Harry Potter and the Deathly Hallows. The overall claim is that problematic representations of animality constructions in the series reinforce, rather than resist, st...
Harry Minti- a project for a book

Science.gov (United States)

Gaina, Alex

2011-08-01

A short biography and an account of scientific research of the Associated Professor of the Hebrew University in Jerusalem (Israel), Dr. Harry Minti (b. 1938, Bucharest) is given. His activity as translator was also mentioned.
The Rise and Rise of Harry Potter.

Science.gov (United States)

Tucker, Nicholas

1999-01-01

Claims that although the Harry Potter stories--with their old-fashioned plots, settings, and characterizations--entertain richly, they rarely provoke, question, or inform. Suggests other contemporary writers who are pushing forward are equally exciting. (NH)
Ajatu arhitektuuriga maal : intervjuu arhitekt Trevor Harrisega / Trevor Harris ; interv. Triin Ojari

Index Scriptorium Estoniae

Harris, Trevor

2004-01-01

Cambridge'is sündinud, üle 20 aasta Soomes elanud T. Harris on 1999. aastast linnaehituse ja -planeerimise professor Helsingi Tehnikaülikooli arhitektuurikateedris, tegutseb büroos Harris-Kjisik Architects & Planners. Enda sattumisest Soome, soome praegusest arhitektuurist, lühidalt Tallinna kesklinnast ja sadamaalast. 5 ill
Harry Potter lendab internetis / Anu Mõttus

Index Scriptorium Estoniae

Mõttus, Anu

2002-01-01

2000/2001. õ.a.-l alguse saanud õpilaste interaktiivsest kirjandusprojektist "R-LIIT", mis sai hiljem nimeks "Lugeda on mõnus". Projekti käigus valiti üks raamat (2001.a. - J.K. Rowling "Harry Potter ja tarkade kivi") ning arutleti selle üle nii koolides kui Interneti vahendusel
Harry Potter jõudis ekraanile / Ilona Martson

Index Scriptorium Estoniae

Martson, Ilona, 1970-

2001-01-01

Eile oli Londonis Joanne Rowling'u lasteraamatu "Harry Potter ja Tarkade kivi" ekraniseeringu esilinastus. Selle 125 miljonit dollarit maksnud USA filmi režissöör on Chris Columbus ja peaosas 12-aastane Daniel Radcliff
The Force-Free Magnetosphere of a Rotating Black Hole

Science.gov (United States)

Contopoulos, Ioannis; Kazanas, Demosthenes; Papadopoulos, Demetrios B.

2013-01-01

We revisit the Blandford-Znajek process and solve the fundamental equation that governs the structure of the steady-state force-free magnetosphere around a Kerr black hole. The solution depends on the distributions of the magnetic field angular velocity and the poloidal electric current. These are not arbitrary. They are determined self-consistently by requiring that magnetic field lines cross smoothly the two singular surfaces of the problem: the inner "light surface" located inside the ergosphere and the outer "light surface" which is the generalization of the pulsar light cylinder.We find the solution for the simplest possible magnetic field configuration, the split monopole, through a numerical iterative relaxation method analogous to the one that yields the structure of the steady-state axisymmetric force-free pulsar magnetosphere. We obtain the rate of electromagnetic extraction of energy and confirm the results of Blandford and Znajek and of previous time-dependent simulations. Furthermore, we discuss the physical applicability of magnetic field configurations that do not cross both "light surfaces."
Harry Potter: Enchantment for All Seasons.

Science.gov (United States)

Black, Sharon

2003-01-01

This article focuses on the enchantment of the Harry Potter series in the development of gifted imagination, self-concept, and worldview in light of Bruno Bettelheim's work, "The Uses of Enchantment." As the processes are discussed, suggestions to guide parents and teachers in facilitating them are included. (Contains references.)…
A short model excitation of an asymmetric force free superconducting transmission line magnet

Energy Technology Data Exchange (ETDEWEB)

Wake, M.; Sato, H.; /KEK, Tsukuba; Carcagno, R.; Foster, W.; Hays, S.; Kashikhin, V.; Oleck, A.; Piekarz, H.; Rabehl, R,; /Fermilab

2005-09-01

A short model of asymmetric force free magnet with single beam aperture was tested at Fermilab together with the excitation test of VLHC transmission line magnet. The design concept of asymmetric force free superconducting magnet was verified by the test. The testing reached up to 104 kA current and no indication of force imbalance was observed. Since the model magnet length was only 10cm, A 0.75m model was constructed and tested at KEK with low current to ensure the validity of the design. The cool down and the excitation at KEK were also successful finding very small thermal contraction of the conductor and reasonable field homogeneity.
Analysis of Harry Potter's Subtitle on Cultural Adaptability

Institute of Scientific and Technical Information of China (English)

赵佳

2018-01-01

With the development of globalization and the intimate touch between China and western countries, it is the information exchange between countries that makes the rapid development of English culture and the inheritance of Chinese culture. And as the important tools and two modern cultural medias for cultural exchange, TV and film are essential in our life, and subtitle translation appeared in people's sights. As one of the most important theories in translation, U. S. Bureau was who first use the cultural adaptation theory. He defined it as' a psychological change from an alien culture to a new cultural.'(1883)It was the basic theory in translation so it must abide by every translator. In this thesis, we will take Western magical fantasy series of movies-Harry Potter as an example, analyzing the importance of the cultural adaptability. Firstly, I will briefly introduce the book and movie about Harry Potter, then explain the content and application of this function, finaly this paper will combine cultural difference and custom difference with religion difference to illustrate that cultural adaptability is main theory in translation. Combining with Harry Potter, I hope this research will help people to have a better understanding of cross-cultural communication and make this film more colorful and shining.
Disintegration of liquid sheets

Science.gov (United States)

Mansour, Adel; Chigier, Norman

1990-01-01

The development, stability, and disintegration of liquid sheets issuing from a two-dimensional air-assisted nozzle is studied. Detailed measurements of mean drop size and velocity are made using a phase Doppler particle analyzer. Without air flow the liquid sheet converges toward the axis as a result of surface tension forces. With airflow a quasi-two-dimensional expanding spray is formed. The air flow causes small variations in sheet thickness to develop into major disturbances with the result that disruption starts before the formation of the main break-up region. In the two-dimensional variable geometry air-blast atomizer, it is shown that the air flow is responsible for the formation of large, ordered, and small chaotic 'cell' structures.
Harry Potter and the curse of headache.

Science.gov (United States)

Sheftell, Fred; Steiner, Timothy J; Thomas, Hallie

2007-06-01

Headache disorders are common in children and adolescents. Even young male Wizards are disabled by them. In this article we review Harry Potter's headaches as described in the biographical series by JK Rowling. Moreover, we attempt to classify them. Regrettably we are not privy to the Wizard system of classifying headache disorders and are therefore limited to the Muggle method, the International Classification of Headache Disorders, 2nd edition (ICHD-II). Harry's headaches are recurrent. Although conforming to a basic stereotype, and constant in location, throughout the 6 years of his adolescence so far described they have shown a tendency to progression. Later descriptions include a range of accompanying symptoms. Despite some quite unusual features, they meet all but one of the ICHD-II criteria for migraine, so allowing the diagnosis of 1.6 Probable migraine.
New approaches and solutions of the nonlinear force-free field

International Nuclear Information System (INIS)

Xie Baisong; Yin Xintao; Luo Xia

2006-01-01

New approaches to nonlinear force-free field equations are presented and new exact solutions are found analytically. Examples are given and some implications of the results to astrophysical solar plasmas as well as tokamak plasmas are discussed
Comparative analysis of internal friction and natural frequency measured by free decay and forced vibration

International Nuclear Information System (INIS)

Wang, Y. Z.; Ding, X. D.; Xiong, X. M.; Zhang, J. X.

2007-01-01

Relations between various values of the internal friction (tgδ, Q -1 , Q -1* , and Λ/π) measured by free decay and forced vibration are analyzed systemically based on a fundamental mechanical model in this paper. Additionally, relations between various natural frequencies, such as vibration frequency of free decay ω FD , displacement-resonant frequency of forced vibration ω d , and velocity-resonant frequency of forced vibration ω 0 are calculated. Moreover, measurement of natural frequencies of a copper specimen of 99.9% purity has been made to demonstrate the relation between the measured natural frequencies of the system by forced vibration and free decay. These results are of importance for not only more accurate measurement of the elastic modulus of materials but also the data conversion between different internal friction measurements
Harry Potter and the Ghost Teacher: Resurrecting the Lost Art of Lecturing

Science.gov (United States)

McDaniel, Kathryn N.

2010-01-01

A significant image of classroom lectures is the one presented in J. K. Rowling's "Harry Potter" series. At Harry's Hogwarts School of Witchcraft and Wizardry, the most torturous class is easily History of Magic, which is, incidentally, the only class in the school taught by a ghost. Being taught by a ghost could be quite exciting: not so in…
Forced versus free traffic in an automated milking system

DEFF Research Database (Denmark)

Munksgaard, Lene; Rushen, J.; de Passillé, A.M.

2011-01-01

Cows in automated milking systems with free access to feeders sometimes show a reduced use of the robotic milkers, while forced traffic where cows have to pass through the robot to reach the feeders may reduce feeding time and frequency. We examined two groups of 35 lactating cows. For 21 d, one...
Kae kunstnikku! / Harry Liivrand, Margit Tõnson

Index Scriptorium Estoniae

Liivrand, Harry, 1961-

2007-01-01

Filmiajaloo kümme parimat filmi kunstnikest: Vincente Minnelli "Elujanu", Peter Webber "Tütarlaps pärlkõrvarõngaga", Andrei Tarkovski "Andrei Rubljov", Julie Taymor "Frida", James Ivory "Picasso: looja ja hävitaja", Ed Harris "Pollock", Julian Schnabel "Basquiat", Konrad Wolf "Goya ehk tunnetuse salakaval tee", Raoul Ruiz "Klimt", Oliver Hirschbiegel "Allakäik"

Force-free electromagnetic pulses in a laboratory plasma

Science.gov (United States)

Stenzel, R. L.; Urrutia, J. M.

1990-01-01

A short, intense current pulse is drawn from an electrode immersed in a magnetized afterglow plasma. The induced magnetic field B(r,t) assumes the shape of a helical double vortex which propagates along B(0) through the uniform plasma as a whistler mode. The observations support a prediction of force-free (J x B + neE = 0) electromagnetic fields and solitary waves. Energy and helicity are approximately conserved.
Harry Potter and the Dichotomous Key

Science.gov (United States)

Crowther, David T.

2003-01-01

In this lesson, students use Bertie Bott's Every Flavor Beans--a "wild" candy written about in the Harry Potter books and now available in stores--to learn about classification and dichotomous keys. In these activities, students sort jelly beans according to a key and then construct a key for a "new" flavor of beans. Students then build on their…
Instabilities of collisionless current sheets revisited: The role of anisotropic heating

International Nuclear Information System (INIS)

Muñoz, P. A.; Kilian, P.; Büchner, J.

2014-01-01

In this work, we investigate the influence of the anisotropic heating on the spontaneous instability and evolution of thin Harris-type collisionless current sheets, embedded in antiparallel magnetic fields. In particular, we explore the influence of the macroparticle shape-function using a 2D version of the PIC code ACRONYM. We also investigate the role of the numerical collisionality due to the finite number of macroparticles in PIC codes. It is shown that it is appropriate to choose higher order shape functions of the macroparticles compared to a larger number of macroparticles per cell. This allows to estimate better the anisotropic electron heating due to the collisions of macroparticles in a PIC code. Temperature anisotropies can stabilize the tearing mode instability and trigger additional current sheet instabilities. We found a good agreement between the analytically derived threshold for the stabilization of the anisotropic tearing mode and other instabilities, either spontaneously developing or initially triggered ones. Numerical effects causing anisotropic heating at electron time scales become especially important for higher mass ratios (above m i /m e =180). If numerical effects are carefully taken into account, one can recover the theoretical estimated linear growth rates of the tearing instability of thin isotropic collisionless current sheets, also for higher mass ratios
Chromate-free Hybrid Coating for Corrosion Protection of Electrogalvanized Steel Sheets

International Nuclear Information System (INIS)

Jo, Duhwan; Kwon, Moonjae; Kim, Jongsang

2012-01-01

Both electrogalvanized and hot-dip galvanized steel sheets have been finally produced via organic-inorganic surface coating process on the zinc surface to enhance corrosion resistance and afford additional functional properties. Recently, POSCO has been developed a variety of chromate-free coated steels that are widely used in household, construction and automotive applications. New organic-inorganic hybrid coating solutions as chromate alternatives are comprised of surface modified silicate with silane coupling agent and inorganic corrosion inhibitors as an aqueous formulation. In this paper we have prepared new type of hybrid coatings and evaluated quality performances such as corrosion resistance, spot weldability, thermal tolerance, and paint adhesion property etc. The electrogalvanized steels with these coating solutions exhibit good anti-corrosion property compared to those of chromate coated steels. Detailed components composition of coating solutions and experimental results suggest that strong binding between organic-inorganic hybrid coating layer and zinc surface plays a key role in the advanced quality performances
Free and Forced Vibrations of Thick-Walled Anisotropic Cylindrical Shells

Science.gov (United States)

Marchuk, A. V.; Gnedash, S. V.; Levkovskii, S. A.

2017-03-01

Two approaches to studying the free and forced axisymmetric vibrations of cylindrical shell are proposed. They are based on the three-dimensional theory of elasticity and division of the original cylindrical shell with concentric cross-sectional circles into several coaxial cylindrical shells. One approach uses linear polynomials to approximate functions defined in plan and across the thickness. The other approach also uses linear polynomials to approximate functions defined in plan, but their variation with thickness is described by the analytical solution of a system of differential equations. Both approaches have approximation and arithmetic errors. When determining the natural frequencies by the semi-analytical finite-element method in combination with the divide and conqure method, it is convenient to find the initial frequencies by the finite-element method. The behavior of the shell during free and forced vibrations is analyzed in the case where the loading area is half the shell thickness
Root-growth-inhibiting sheet

Science.gov (United States)

Burton, F.G.; Cataldo, D.A.; Cline, J.F.; Skiens, W.E.; Van Voris, P.

1993-01-26

In accordance with this invention, a porous sheet material is provided at intervals with bodies of a polymer which contain a 2,6-dinitroaniline. The sheet material is made porous to permit free passage of water. It may be either a perforated sheet or a woven or non-woven textile material. A particularly desirable embodiment is a non-woven fabric of non-biodegradable material. This type of material is known as a geotextile'' and is used for weed control, prevention of erosion on slopes, and other landscaping purposes. In order to obtain a root repelling property, a dinitroaniline is blended with a polymer which is attached to the geotextile or other porous material.
Root-growth-inhibiting sheet

Science.gov (United States)

Burton, Frederick G.; Cataldo, Dominic A.; Cline, John F.; Skiens, W. Eugene; Van Voris, Peter

1993-01-01

In accordance with this invention, a porous sheet material is provided at intervals with bodies of a polymer which contain a 2,6-dinitroaniline. The sheet material is made porous to permit free passage of water. It may be either a perforated sheet or a woven or non-woven textile material. A particularly desirable embodiment is a non-woven fabric of non-biodegradable material. This type of material is known as a "geotextile" and is used for weed control, prevention of erosion on slopes, and other landscaping purposes. In order to obtain a root repelling property, a dinitroaniline is blended with a polymer which is attached to the geotextile or other porous material.
Free vibration of geometrically nonlinear micro-switches under electrostatic and Casimir forces

International Nuclear Information System (INIS)

Jia, X L; Kitipornchai, S; Lim, C W; Yang, J

2010-01-01

This paper investigates the free vibration characteristics of micro-switches under combined electrostatic, intermolecular forces and axial residual stress, with an emphasis on the effect of geometric nonlinear deformation due to mid-plane stretching and the influence of Casimir force. The micro-switch considered in this study is made of either homogeneous material or non-homogeneous functionally graded material with two material phases. The Euler–Bernoulli beam theory with von Karman type nonlinear kinematics is applied in the theoretical formulation. The principle of virtual work is used to derive the nonlinear governing differential equation. The eigenvalue problem which describes free vibration of the micro-beam at its statically deflected state is then solved using the differential quadrature method. The natural frequencies and mode shapes of micro-switches for four different boundary conditions (i.e. clamped–clamped, clamped–simply supported, simply supported and clamped–free) are obtained. The solutions are validated through direct comparisons with experimental and other existing results reported in previous studies. A parametric study is conducted to show the significant effects of geometric nonlinearity, Casimir force, axial residual stress and material composition for the natural frequencies
Mechanical properties and corrosion resistance of nitrided or oxinitrided, and powder painted regular and interstitial free (IF) drawing steel sheet

Energy Technology Data Exchange (ETDEWEB)

Rogalski, Z.; Latas, Z. [Instytut Mechaniki Precyzyjnej, ul. Duchnicka 3, 01-796 Warszawa (Poland)

2004-06-01

Specimens of 0.8 mm thick regular and interstitial free (IF) drawing steel sheet have been nitrided in fluidised bed for 2 hours at 620 C and 560 C with and without a post-oxidation, and slow and accelerated cooling. As a result, surface hardness, yield and tensile strength of the sheets increased considerably without a critical loss of ductility. Resistance welds between the sheets did not lose their original strength after nitriding-oxinitriding. Nitrided-oxinitrided at 620 C and then powder painted sheets, as compared with powder painted raw sheets, were more corrosion resistant in neutral salt spray and climatic tests. Some mechanical and anticorrosion properties of the IF steel sheet that had undergone the nitriding-oxinitriding processes were definitely better than those of equally processed regular steel sheet. (Abstract Copyright [2004], Wiley Periodicals, Inc.) [German] Proben aus 0,8 mm dickem Blech aus Ziehmassenstahl sowie aus Ziehstahl ohne interstitiel geloeste Legierungsanteile (IF), werden im Wirbelbett in 2 Stunden bei 620 und 560 {sup o}C nitriert mit nachfolgenden Oxidierung sowie alternativ ohne Oxidierung und mit langsamer und beschleunigter Abkuehlung. Infolge dessen nehmen die Haerte, die Dehngrenze und die Zugfestigkeit der Bleche zu, ohne kritischen Zaehigkeitsverlust. Die Widerstandsschweisswulste zwischen den Blechen nach dem Nitrieren-Oxinitrieren haben nicht an Festigkeit verloren. Die bei 620 {sup o}C nitrierten-oxinitrierten und nachfolgend mit Pulverlack beschichteten Bleche sind bei den Versuchen in Salznebel und bei klimatischen Versuchen korrosionbestaendiger im Vergleich mit den mit nur Pulverlack beschichteten Rohblechen. Manche der mechanischen und korrosionsverhalten betreffenden Eigenschaften der Bleche aus IF-Staehle sind entscheidend besser als fuer das ebenso behandelte Blech aus Ziehmassenstahl. (Abstract Copyright [2004], Wiley Periodicals, Inc.)
Nonlinear Force-free Coronal Magnetic Stereoscopy

Energy Technology Data Exchange (ETDEWEB)

Chifu, Iulia; Wiegelmann, Thomas; Inhester, Bernd, E-mail: chifu@mps.mpg.de [Max-Planck-Institut für Sonnensystemforschung, Justus-von-Liebig-Weg 3, D-37077 Göttingen (Germany)

2017-03-01

Insights into the 3D structure of the solar coronal magnetic field have been obtained in the past by two completely different approaches. The first approach are nonlinear force-free field (NLFFF) extrapolations, which use photospheric vector magnetograms as boundary condition. The second approach uses stereoscopy of coronal magnetic loops observed in EUV coronal images from different vantage points. Both approaches have their strengths and weaknesses. Extrapolation methods are sensitive to noise and inconsistencies in the boundary data, and the accuracy of stereoscopy is affected by the ability of identifying the same structure in different images and by the separation angle between the view directions. As a consequence, for the same observational data, the 3D coronal magnetic fields computed with the two methods do not necessarily coincide. In an earlier work (Paper I) we extended our NLFFF optimization code by including stereoscopic constrains. The method was successfully tested with synthetic data, and within this work, we apply the newly developed code to a combined data set from SDO /HMI, SDO /AIA, and the two STEREO spacecraft. The extended method (called S-NLFFF) contains an additional term that monitors and minimizes the angle between the local magnetic field direction and the orientation of the 3D coronal loops reconstructed by stereoscopy. We find that when we prescribe the shape of the 3D stereoscopically reconstructed loops, the S-NLFFF method leads to a much better agreement between the modeled field and the stereoscopically reconstructed loops. We also find an appreciable decrease by a factor of two in the angle between the current and the magnetic field. This indicates the improved quality of the force-free solution obtained by S-NLFFF.
A method to quantify mechanobiologic forces during zebrafish cardiac development using 4-D light sheet imaging and computational modeling.

Directory of Open Access Journals (Sweden)

Vijay Vedula

2017-10-01

Full Text Available Blood flow and mechanical forces in the ventricle are implicated in cardiac development and trabeculation. However, the mechanisms of mechanotransduction remain elusive. This is due in part to the challenges associated with accurately quantifying mechanical forces in the developing heart. We present a novel computational framework to simulate cardiac hemodynamics in developing zebrafish embryos by coupling 4-D light sheet imaging with a stabilized finite element flow solver, and extract time-dependent mechanical stimuli data. We employ deformable image registration methods to segment the motion of the ventricle from high resolution 4-D light sheet image data. This results in a robust and efficient workflow, as segmentation need only be performed at one cardiac phase, while wall position in the other cardiac phases is found by image registration. Ventricular hemodynamics are then quantified by numerically solving the Navier-Stokes equations in the moving wall domain with our validated flow solver. We demonstrate the applicability of the workflow in wild type zebrafish and three treated fish types that disrupt trabeculation: (a chemical treatment using AG1478, an ErbB2 signaling inhibitor that inhibits proliferation and differentiation of cardiac trabeculation; (b injection of gata1a morpholino oligomer (gata1aMO suppressing hematopoiesis and resulting in attenuated trabeculation; (c weak-atriumm58 mutant (wea with inhibited atrial contraction leading to a highly undeveloped ventricle and poor cardiac function. Our simulations reveal elevated wall shear stress (WSS in wild type and AG1478 compared to gata1aMO and wea. High oscillatory shear index (OSI in the grooves between trabeculae, compared to lower values on the ridges, in the wild type suggest oscillatory forces as a possible regulatory mechanism of cardiac trabeculation development. The framework has broad applicability for future cardiac developmental studies focused on quantitatively
The deathly hallows: Harry Potter and adolescent development.

Science.gov (United States)

Rosegrant, John

2009-12-01

The enormous popularity of the Harry Potter books points to the deep resonance readers feel with the psychological issues they bring to life. Three developmental issues provide central themes: the necessity for partial disenchantment and increasing attunement to reality, while retaining a capacity for wonder; repudiation or endorsement of the narcissistic solution to life's difficulties; and aggression and castration fantasies while growing into adult power. These developmental issues are particularly acute during adolescence but start earlier and continue to be reworked throughout the life span, accounting for the books' appeal to a wide age-range of readers despite their apparent focus on adolescence. These developmental themes are explored in order to better understand the Harry Potter books, as, conversely, the books are explored in order to better understand these themes.
Simulation of the Greenland Ice Sheet over two glacial–interglacial cycles: investigating a sub-ice-shelf melt parameterization and relative sea level forcing in an ice-sheet–ice-shelf model

Directory of Open Access Journals (Sweden)

S. L. Bradley

2018-05-01

Full Text Available Observational evidence, including offshore moraines and sediment cores, confirm that at the Last Glacial Maximum (LGM the Greenland ice sheet (GrIS expanded to a significantly larger spatial extent than seen at present, grounding into Baffin Bay and out onto the continental shelf break. Given this larger spatial extent and its close proximity to the neighbouring Laurentide Ice Sheet (LIS and Innuitian Ice Sheet (IIS, it is likely these ice sheets will have had a strong non-local influence on the spatial and temporal behaviour of the GrIS. Most previous paleo ice-sheet modelling simulations recreated an ice sheet that either did not extend out onto the continental shelf or utilized a simplified marine ice parameterization which did not fully include the effect of ice shelves or neglected the sensitivity of the GrIS to this non-local bedrock signal from the surrounding ice sheets. In this paper, we investigated the evolution of the GrIS over the two most recent glacial–interglacial cycles (240 ka BP to the present day using the ice-sheet–ice-shelf model IMAU-ICE. We investigated the solid earth influence of the LIS and IIS via an offline relative sea level (RSL forcing generated by a glacial isostatic adjustment (GIA model. The RSL forcing governed the spatial and temporal pattern of sub-ice-shelf melting via changes in the water depth below the ice shelves. In the ensemble of simulations, at the glacial maximums, the GrIS coalesced with the IIS to the north and expanded to the continental shelf break to the southwest but remained too restricted to the northeast. In terms of the global mean sea level contribution, at the Last Interglacial (LIG and LGM the ice sheet added 1.46 and −2.59 m, respectively. This LGM contribution by the GrIS is considerably higher (∼  1.26 m than most previous studies whereas the contribution to the LIG highstand is lower (∼  0.7 m. The spatial and temporal behaviour of the northern margin was
Harry Lehmann and the analyticity unitarity programme

International Nuclear Information System (INIS)

Martin, A.

2001-01-01

I try to describe the extremely fruitful interaction I had with Harry Lehmann and the results which came out of the analyticity unitarity programme, especially the proof of the Froissart bound, which, with recent and future measurements of total cross-sections and real parts, remains topical. (orig.)
Experimental formability analysis of bondal sandwich sheet

Science.gov (United States)

Kami, Abdolvahed; Banabic, Dorel

2018-05-01

Metal/polymer/metal sandwich sheets have recently attracted the interests of industries like automotive industry. These sandwich sheets have superior properties over single-layer metallic sheets including good sound and vibration damping and light weight. However, the formability of these sandwich sheets should be enhanced which requires more research. In this paper, the formability of Bondal sheet (DC06/viscoelastic polymer/DC06 sandwich sheet) was studied through different types of experiments. The mechanical properties of Bondal were determined by uniaxial tensile tests. Hemispherical punch stretching and hydraulic bulge tests were carried out to determine the forming limit diagram (FLD) of Bondal. Furthermore, cylindrical and square cup drawing tests were performed in dry and oil lubricated conditions. These tests were conducted at different blank holding forces (BHFs). An interesting observation about Bondal sheet deep drawing was obtaining of higher drawing depths at dry condition in comparison with oil-lubricated condition.
Bewitched, Bothered, and Bored: Harry Potter, The Movie.

Science.gov (United States)

Nel, Philip

2002-01-01

Explores the Harry Potter phenomenon with college students in a university course. Compares the first book with the first movie. Presents an in-depth discussion of the movie and how it relates to the book. (SG)
Harry Potter som transmedia storytelling

DEFF Research Database (Denmark)

Waade, Anne Marit; Toft-Nielsen, Claus

2015-01-01

) seriekultur og fanaktiviteter der belyser modtagernes kulturelle kontekster. I forlængelse heraf, præsenteres en analysemodel, der tager højde for de forskellige typer tekster samt deres kontekster og mediekredsløb. Modellen ligger til grund for den efterfølgende analyse af bestselleren og blockbusteren Harry...... Potter. Afslutningsvis diskuteres tekstanalysens styrker og begrænsninger i forhold til transmedia fortællinger, og hvordan den evt. kan kombineres med empiriske afsender og modtageranalyser....
Double jeopardy, the equal value of lives and the veil of ignorance: a rejoinder to Harris.

Science.gov (United States)

McKie, J; Kuhse, H; Richardson, J; Singer, P

1996-08-01

Harris levels two main criticisms against our original defence of QALYs (Quality Adjusted Life Years). First, he rejects the assumption implicit in the QALY approach that not all lives are of equal value. Second, he rejects our appeal to Rawls's veil of ignorance test in support of the QALY method. In the present article we defend QALYs against Harris's criticisms. We argue that some of the conclusions Harris draws from our view that resources should be allocated on the basis of potential improvements in quality of life and quantity of life are erroneous, and that others lack the moral implications Harris claims for them. On the other hand, we defend our claim that a rational egoist, behind a veil of ignorance, could consistently choose to allocate life-saving resources in accordance with the QALY method, despite Harris's claim that a rational egoist would allocate randomly if there is no better than a 50% chance of being the recipient.
Harris lines of the tibia across centuries: a comparison of two populations, medieval and contemporary in Central Europe

International Nuclear Information System (INIS)

Ameen, S.; Vock, P.; Anderson, S.E.; Staub, L.; Ulrich, S.; Ballmer, F.

2005-01-01

To determine the incidence of Harris lines in two medieval populations which inhabited the Canton of Berne, in Central Switzerland, and to compare the results with those of a contemporary population living in the same geographical area. A simplified method is described for measuring the age of the individual at the time of formation of Harris lines, with possible future applications. Radiographs of 112 well-preserved tibiae of skeletons of two medieval populations from the eighth to fifteenth centuries were reviewed for the incidence of Harris lines. The results were compared with those of 138 current patients living in the same geographic location in Central Switzerland. Age and gender of the medieval individual were determined using known anthropological methods. Age of bone at the time of formation of Harris lines was estimated according to the method of Maat. Harris lines were found in 88 of 112 (80%) of the examined medieval skeletons and in 28 of 138 (20%) of the living individuals. Higher incidences of Harris lines were found at the age of 2 years and at ages between 8 and 12 years in both populations. No gender difference was found regarding the incidence of Harris lines. In both populations the occurrence of Harris lines was associated with certain diseases such as degenerative bone disease, trauma, osteoporosis, rheumatoid arthritis, peripheral vascular diseases, rickets and bony deformities. (orig.)
Harris lines of the tibia across centuries: a comparison of two populations, medieval and contemporary in Central Europe

Energy Technology Data Exchange (ETDEWEB)

Ameen, S.; Vock, P.; Anderson, S.E. [University Hospital of Bern, Department of Diagnostic Radiology, Bern (Switzerland); Staub, L.; Ulrich, S. [University of Bern, Institute of Historical Medicine, Bern (Switzerland); Ballmer, F. [University Hospital of Bern, Department of Orthopaedics, Bern (Switzerland)

2005-05-01

To determine the incidence of Harris lines in two medieval populations which inhabited the Canton of Berne, in Central Switzerland, and to compare the results with those of a contemporary population living in the same geographical area. A simplified method is described for measuring the age of the individual at the time of formation of Harris lines, with possible future applications. Radiographs of 112 well-preserved tibiae of skeletons of two medieval populations from the eighth to fifteenth centuries were reviewed for the incidence of Harris lines. The results were compared with those of 138 current patients living in the same geographic location in Central Switzerland. Age and gender of the medieval individual were determined using known anthropological methods. Age of bone at the time of formation of Harris lines was estimated according to the method of Maat. Harris lines were found in 88 of 112 (80%) of the examined medieval skeletons and in 28 of 138 (20%) of the living individuals. Higher incidences of Harris lines were found at the age of 2 years and at ages between 8 and 12 years in both populations. No gender difference was found regarding the incidence of Harris lines. In both populations the occurrence of Harris lines was associated with certain diseases such as degenerative bone disease, trauma, osteoporosis, rheumatoid arthritis, peripheral vascular diseases, rickets and bony deformities. (orig.)

7 CFR Exhibit D to Subpart B of... - Fact Sheet-The Federal Interagency Task Force on Food and Shelter for the Homeless

Science.gov (United States)

2010-01-01

... (CONTINUED) PROPERTY MANAGEMENT Management of Property Exhibit D to Subpart B of Part 1955—Fact Sheet—The... 7 Agriculture 14 2010-01-01 2009-01-01 true Fact Sheet-The Federal Interagency Task Force on Food and Shelter for the Homeless D Exhibit D to Subpart B of Part 1955 Agriculture Regulations of the...
Harry Potteri film tänasest Eesti fännide ees - vanusepiiranguta! / Lauri Birkan

Index Scriptorium Estoniae

Birkan, Lauri

2005-01-01

Järjekorras neljas Potteri ekraniseering "Harry Potter ja tulepeeker" ("Harry Potter and the Goblet of Fire") jõudis Eestisse. Režissöör Mike Newell : Suurbritannia-USA 2005. Lisatud lühike sisukokkuvõte "Harryl mure mure otsa" ning filmi kinoedu tutvustav "Edetabelite tipus"
Tips from Harry Potter for American Schools

Science.gov (United States)

Booth, Margaret Zoller; Booth, Grace Marie

2004-01-01

The United States has been swept up in the "Harry Potter" phenomenon, with film adaptations, companion readers, and literary critique and analysis following J. K. Rowling's books on the adolescent wizard's adventures. The book has also touched off a reaction from conservative Christian institutions seeking to ban the books in school…
"Harry Potter" and the English Language Learner.

Science.gov (United States)

Coatney, Kathy

2001-01-01

Describes one teacher's success with using "Harry Potter" in a program to teach elementary school English language learners. Provides comprehension strategies incorporated to help learners understand the story. Highlights the importance of creating a classroom environment with a low level of anxiety, the implications of the program, and the value…
Heat Exchanger Tube to Tube Sheet Joints Corrosion Behavior

Directory of Open Access Journals (Sweden)

M. Iancu

2013-03-01

Full Text Available Paper presents the studies made by the authors above the tube to tube sheet fittings of heat exchanger with fixed covers from hydrofining oil reforming unit. Tube fittings are critical zones for heat exchangers failures. On a device made from material tube and tube sheet at real joints dimensions were establish axial compression force and traction force at which tube is extracted from expanded joint. Were used two shapes joints with two types of fittings surfaces, one with smooth hole of tube sheet and other in which on boring surface we made a groove. From extracted expanded tube zones were made samples for corrosion tests in order to establish the corrosion rate, corrosion potential and corrosion current in working mediums such as hydrofining oil and industrial water at different temperatures. The corrosion rate values and the temperature influence are important to evaluate joints durability and also the results obtained shows that the boring tube sheet shape with a groove on hole tube shape presents a better corrosion behavior then the shape with smooth hole tube sheet.
Interaction of a charge with a thin plasma sheet

International Nuclear Information System (INIS)

Bordag, M.

2007-01-01

The interaction of the electromagnetic field with a two-dimensional plasma sheet intended to describe the pi-electrons of a carbon nanotube or a C 60 molecule is investigated. By first integrating out the displacement field of the plasma or the electromagnetic field, different representations for quantities like the Casimir energy are derived which are shown to be consistent with one another. Starting from the covariant gauge for the electromagnetic field, it is shown that the matching conditions to which the presence of the plasma sheet can be reduced are different from the commonly used ones. The difference in the treatments does not show up in the Casimir force between two parallel sheets, but it is present in the Casimir-Polder force between a charge or a neutral atom and a sheet. At once, since the plasma sheet is a regularization of the conductor boundary conditions, this sheds light on the difference in physics found earlier in the realization of conductor boundary conditions as 'thin' or 'thick' boundary conditions in Phys. Rev. D 70, 085010 (2004)
Effect of secondary structure on the potential of mean force for poly-L-lysine in the alpha-Helix and beta-sheet conformations

Energy Technology Data Exchange (ETDEWEB)

Grigsby, J.J.; Blanch, H.W.; Prausnitz, J.M.

2001-10-30

Because poly-L-lysine (PLL) can exist in the {alpha}-helix or {beta}-sheet conformation depending on solution preparation and solution conditions, PLL is a suitable candidate to probe the dependence of protein interactions on secondary structure. The osmotic second virial coefficient and weight-average molecular weight are reported from low-angle laser-light scattering measurements for PLL as a function of NaCl concentration, pH, and {alpha}-helix or {beta}-sheet content. Interactions between PLL molecules become more attractive as salt concentration increases due to screening of PLL charge by salt ions and at low salt concentration become more attractive as pH increases due to decreased net charge on PLL. The experimental results show that interactions are stronger for the {beta}-sheet conformation than for the {alpha}-helix conformation. A spherically-symmetric model for the potential of mean force is used to account for specific interactions not described by DLVO theory and to show how differences in secondary structure affect PLL interactions.
Dynamics of solar magnetic fields. VI. Force-free magnetic fields and motions of magnetic foot-points

International Nuclear Information System (INIS)

Low, B.C.; Nakagawa, Y.

1975-01-01

A mathematical model is developed to consider the evolution of force-free magnetic fields in relation to the displacements of their foot-points. For a magnetic field depending on only two Cartesian coordinates and time, the problem reduces to solving a nonlinear elliptic partial differential equation. As illustration of the physical process, two specific examples of evolving force-free magnetic fields are examined in detail, one evolving with rising and the other with descending field lines. It is shown that these two contrasting behaviors of the field lines correspond to sheared motions of their foot-points of quite different characters. The physical implications of these two examples of evolving force-free magnetic fields are discussed. (auth)
Effects of Experience on Preference between Forced and Free Choice

Science.gov (United States)

Ono, Koichi

2004-01-01

Preference between forced choice and free choice in concurrent-chain schedules of reinforcement was investigated in pigeons after exposure to particular combinations of terminal links. In Experiment 1, in which terminal links always ended with reinforcers, one of three pairs of terminal links was arranged as preexposure: (a) both terminal links…
Harry Potter tungib peale igast suunast / Hindrek Riikoja

Index Scriptorium Estoniae

Riikoja, Hindrek

2001-01-01

Eesti kauplustes saadab suur müügiedu kõikvõimalikke mänguasju, kleepse ja muud atribuutikat mis seondub Joanne Rowling'u Potteri-raamatutega ja nüüd ka meie kinno jõudnud "Harry Potter ja Tarkade kivi" ekraniseeringuga
"Harry Potteri" võimas avalöök

Index Scriptorium Estoniae

2010-01-01

19. novembril 2010 Eestis kinodesse jõudnud režissöör David Yates´i film "Harry Potter ja surma vägised" 1. osa (USA, Suurbritannia, 2010) kogus avanädalavahetusel 18138 vaatajat. Filmi edust mujal maailmas
Harry Potteri film jõudis Eestisse / Ilona Martson

Index Scriptorium Estoniae

Martson, Ilona, 1970-

2001-01-01

Joanne Rowling'u lasteraamatu "Harry Potter ja Tarkade kivi" ekraniseeringu esilinastus Eestis on 21. detsembril Coca Cola Plazas. Selle 125 miljonit dollarit maksnud USA filmi režissöör on Chris Columbus ja peaosas 12-aastane Daniel Radcliff
Synthesis of nanometre-thick MoO3 sheets

Science.gov (United States)

Kalantar-Zadeh, Kourosh; Tang, Jianshi; Wang, Minsheng; Wang, Kang L.; Shailos, Alexandros; Galatsis, Kosmas; Kojima, Robert; Strong, Veronica; Lech, Andrew; Wlodarski, Wojtek; Kaner, Richard B.

2010-03-01

The formation of MoO3 sheets of nanoscale thickness is described. They are made from several fundamental sheets of orthorhombic α-MoO3, which can be processed in large quantities via a low cost synthesis route that combines thermal evaporation and mechanical exfoliation. These fundamental sheets consist of double-layers of linked distorted MoO6 octahedra. Atomic force microscopy (AFM) measurements show that the minimum resolvable thickness of these sheets is 1.4 nm which is equivalent to the thickness of two double-layers within one unit cell of the α-MoO3 crystal.
Gyrokinetic electron acceleration in the force-free corona with anomalous resistivity

OpenAIRE

Arzner, Kaspar; Vlahos, Loukas

2006-01-01

We numerically explore electron acceleration and coronal heating by dissipative electric fields. Electrons are traced in linear force-free magnetic fields extrapolated from SOHO/MDI magnetograms, endowed with anomalous resistivity ($\\eta$) in localized dissipation regions where the magnetic twist $\
The Politics of Terror: Rereading "Harry Potter"

Science.gov (United States)

Strimel, Courtney B.

2004-01-01

This article claims that J. K. Rowling's "Harry Potter" series, with its use of magic, frightening storylines, and character ambiguity is beneficial to children who are dealing with issues related to terror and terrorism. The author explains that the scenarios presented in Rowling's series teach children strategies for coping with both physical…
Exact Solutions of the Harry-Dym Equation

International Nuclear Information System (INIS)

Mokhtari, Reza

2011-01-01

The aim of this paper is to generate exact travelling wave solutions of the Harry-Dym equation through the methods of Adomian decomposition, He's variational iteration, direct integration, and power series. We show that the two later methods are more successful than the two former to obtain more solutions of the equation. (general)
Imaging appearance of entrapped periosteum within a distal femoral Salter-Harris II fracture

International Nuclear Information System (INIS)

Chen, Johnathan; Abel, Mark F.; Fox, Michael G.

2015-01-01

Salter Harris II fractures of the distal femur are associated with a high incidence of complications, especially premature physeal closure. Many risk factors for this high rate of premature physeal closure have been proposed. More recently, entrapment of periosteum within the physis has been suggested as an additional predisposing factor for premature physeal closure. The radiographic diagnosis of entrapped soft tissues, including periosteum, can be suggested in the setting of a Salter-Harris II fracture when the fracture does not reduce and physeal widening >3 mm remains. We report a patient who sustained a distal femoral Salter-Harris II fracture following a valgus injury. The patient had persistent distal medial physeal widening >5 mm following attempted reduction. A subsequent MRI revealed a torn periosteum entrapped within the distal femoral physis. Following removal of the periosteum, the patient developed a leg length discrepancy which required physiodesis of the contralateral distal femur. We present this case to raise awareness of the importance of having a high index of suspicion of periosteal entrapment in the setting of Salter-Harris II fractures since most consider entrapped periosteum an indication for surgery. (orig.)
Large-scale Modeling of the Greenland Ice Sheet on Long Timescales

DEFF Research Database (Denmark)

Solgaard, Anne Munck

is investigated as well as its early history. The studies are performed using an ice-sheet model in combination with relevant forcing from observed and modeled climate. Changes in ice-sheet geometry influences atmospheric flow (and vice versa) hereby changing the forcing patterns. Changes in the overall climate...... and climate model is included shows, however, that a Föhn effect is activated and hereby increasing temperatures inland and inhibiting further ice-sheet expansion into the interior. This indicates that colder than present temperatures are needed in order for the ice sheet to regrow to the current geometry....... Accordingto this hypothesis, two stages of uplift since the Late Miocene lead to the present-day topography. The results of the ice-sheet simulations show geometries in line with geologicobservations through the period, and it is found that the uplift events enhance the effect of the climatic deterioration...
Deconstructing Harry: A Practical Approach To Getting the Most Out of a Certain Young Wizard.

Science.gov (United States)

Greene, Pamela M.

2000-01-01

Presents ideas for activities geared to children ages seven and up that revolve around the Harry Potter books, based on a Harry Potter Holiday Club developed at the Beverly Hills (California) Public Library. Includes costs, craft activities, theater performances, and games. (LRW)
Porcine Dental Epithelial Cells Differentiated in a Cell Sheet Constructed by Magnetic Nanotechnology

Directory of Open Access Journals (Sweden)

Wataru Koto

2017-10-01

Full Text Available Magnetic nanoparticles (MNPs are widely used in medical examinations, treatments, and basic research, including magnetic resonance imaging, drug delivery systems, and tissue engineering. In this study, MNPs with magnetic force were applied to tissue engineering for dental enamel regeneration. The internalization of MNPs into the odontogenic cells was observed by transmission electron microscopy. A combined cell sheet consisting of dental epithelial cells (DECs and dental mesenchymal cells (DMCs (CC sheet was constructed using magnetic force-based tissue engineering technology. The result of the iron staining indicated that MNPs were distributed ubiquitously over the CC sheet. mRNA expression of enamel differentiation and basement membrane markers was examined in the CC sheet. Immunostaining showed Collagen IV expression at the border region between DEC and DMC layers in the CC sheet. These results revealed that epithelial–mesenchymal interactions between DEC and DMC layers were caused by bringing DECs close to DMCs mechanically by magnetic force. Our study suggests that the microenvironment in the CC sheet might be similar to that during the developmental stage of a tooth bud. In conclusion, a CC sheet employing MNPs could be developed as a novel and unique graft for artificially regenerating dental enamel.

Generating Converged Accurate Free Energy Surfaces for Chemical Reactions with a Force-Matched Semiempirical Model.

Science.gov (United States)

Kroonblawd, Matthew P; Pietrucci, Fabio; Saitta, Antonino Marco; Goldman, Nir

2018-04-10

We demonstrate the capability of creating robust density functional tight binding (DFTB) models for chemical reactivity in prebiotic mixtures through force matching to short time scale quantum free energy estimates. Molecular dynamics using density functional theory (DFT) is a highly accurate approach to generate free energy surfaces for chemical reactions, but the extreme computational cost often limits the time scales and range of thermodynamic states that can feasibly be studied. In contrast, DFTB is a semiempirical quantum method that affords up to a thousandfold reduction in cost and can recover DFT-level accuracy. Here, we show that a force-matched DFTB model for aqueous glycine condensation reactions yields free energy surfaces that are consistent with experimental observations of reaction energetics. Convergence analysis reveals that multiple nanoseconds of combined trajectory are needed to reach a steady-fluctuating free energy estimate for glycine condensation. Predictive accuracy of force-matched DFTB is demonstrated by direct comparison to DFT, with the two approaches yielding surfaces with large regions that differ by only a few kcal mol -1 .
Gamma-point lattice free energy estimates from O(1) force calculations

DEFF Research Database (Denmark)

Voss, Johannes; Vegge, Tejs

2008-01-01

We present a new method for estimating the vibrational free energy of crystal (and molecular) structures employing only a single force calculation, for a particularly displaced configuration, in addition to the calculation of the ground state configuration. This displacement vector is the sum...
Head kavatsused ja umbusu lained / Harri Tiido

Index Scriptorium Estoniae

Tiido, Harri, 1953-

2003-01-01

Ilmunud ka: Estonija 29. okt. lk. 11. Eesti suursaadik NATO-s Harri Tiido analüüsib riigikaitsedebatti Eestis. Autor taunib NATO-t mitteusaldava mõtteviisi levikut. Diagramm: Kaitsejõudude ja NATO usaldus rahva seas. Kommenteerivad NATO peasekretär George Robertson, USA presidendi julgeolekunõunik Condoleezza Rice, Soome majandus- ja poliitikauuringute keskuse EVA julgeolekuraporti autor Pentti Vartia
Modelling seasonal meltwater forcing of the velocity of land-terminating margins of the Greenland Ice Sheet

Science.gov (United States)

Koziol, Conrad P.; Arnold, Neil

2018-03-01

Surface runoff at the margin of the Greenland Ice Sheet (GrIS) drains to the ice-sheet bed, leading to enhanced summer ice flow. Ice velocities show a pattern of early summer acceleration followed by mid-summer deceleration due to evolution of the subglacial hydrology system in response to meltwater forcing. Modelling the integrated hydrological-ice dynamics system to reproduce measured velocities at the ice margin remains a key challenge for validating the present understanding of the system and constraining the impact of increasing surface runoff rates on dynamic ice mass loss from the GrIS. Here we show that a multi-component model incorporating supraglacial, subglacial, and ice dynamic components applied to a land-terminating catchment in western Greenland produces modelled velocities which are in reasonable agreement with those observed in GPS records for three melt seasons of varying melt intensities. This provides numerical support for the hypothesis that the subglacial system develops analogously to alpine glaciers and supports recent model formulations capturing the transition between distributed and channelized states. The model shows the growth of efficient conduit-based drainage up-glacier from the ice sheet margin, which develops more extensively, and further inland, as melt intensity increases. This suggests current trends of decadal-timescale slowdown of ice velocities in the ablation zone may continue in the near future. The model results also show a strong scaling between average summer velocities and melt season intensity, particularly in the upper ablation area. Assuming winter velocities are not impacted by channelization, our model suggests an upper bound of a 25 % increase in annual surface velocities as surface melt increases to 4 × present levels.
Thermal modeling of the forced convection Sandwich Greenhouse drying system for rubber sheets

International Nuclear Information System (INIS)

Tanwanichkul, B.; Thepa, S.; Rordprapat, W.

2013-01-01

Highlights: • Sandwich Greenhouse is designed for better quality and efficiency of rubber sheet drying. • Thermal models are developed to predict the convection heat transfer coefficient. • The models are validated and show good agreement with the actual experimental data. • The proposed greenhouse can maintain 40–60 °C, suitable for rubber sheet drying. • This greenhouse can bring down the moisture content to 2.8% in fewer than 2 days. - Abstract: In this paper, a novel “Sandwich Greenhouse” for rubber sheet drying is proposed. Using solar energy as the only heat source instead of traditional smoke house that requires firewood, it eliminates shortcomings such as skilled labor monitoring requirement, possible fire hazard, and darken-color rubber sheets due to soot particle contamination. Our greenhouse is specially designed to retain solar energy within, while minimizing the heat loss to the outside environment. The mathematical models are developed to predict the convection mass transfer coefficient and to study the thermal behavior during the drying of rubber sheets under our proposed greenhouse design. Validated with experimental observations, the models show good agreement with the actual experimental data. The experiment demonstrates an effectiveness of our proposed Sandwich Greenhouse, as the temperature of the rubber sheet is 15 °C and 5 °C higher than the ambient temperature during the daytime and nighttime, respectively. As a result, the moisture content of the rubber sheets can decrease from 36.4% to 2.8% in fewer than 2 days
Nonparaxial Bessel and Bessel-Gauss pincers light-sheets

Science.gov (United States)

Mitri, F. G.

2017-01-01

Nonparaxial optical Bessel and Bessel-Gauss pincers optical-sheets are introduced based upon the angular spectrum decomposition in plane waves. The angular spectrum function and the beam-shape coefficients are expressed by means of improper integrals computed numerically. The radiated component of the electric field is also evaluated, displaying unique features of the nonparaxial Bessel pincers light-sheets. This new type of auto-focusing light-sheets finds potential applications in the development of novel methods in optical light-sheet tweezers for particle manipulation in opto-fluidics, particle sizing and imaging. Numerical predictions for the scattering, radiation force and torque, and particle dynamics also benefit from the developed beam solution.
A nonlinear eigenvalue problem for self-similar spherical force-free magnetic fields

Energy Technology Data Exchange (ETDEWEB)

Lerche, I. [Institut für Geowissenschaften, Naturwissenschaftliche Fakultät III, Martin-Luther Universität, D-06099 Halle (Germany); Low, B. C. [High Altitude Observatory, National Center for Atmospheric Research, Boulder, Colorado 80307 (United States)

2014-10-15

An axisymmetric force-free magnetic field B(r, θ) in spherical coordinates is defined by a function r sin θB{sub φ}=Q(A) relating its azimuthal component to its poloidal flux-function A. The power law r sin θB{sub φ}=aA|A|{sup 1/n}, n a positive constant, admits separable fields with A=(A{sub n}(θ))/(r{sup n}) , posing a nonlinear boundary-value problem for the constant parameter a as an eigenvalue and A{sub n}(θ) as its eigenfunction [B. C. Low and Y. Q Lou, Astrophys. J. 352, 343 (1990)]. A complete analysis is presented of the eigenvalue spectrum for a given n, providing a unified understanding of the eigenfunctions and the physical relationship between the field's degree of multi-polarity and rate of radial decay via the parameter n. These force-free fields, self-similar on spheres of constant r, have basic astrophysical applications. As explicit solutions they have, over the years, served as standard benchmarks for testing 3D numerical codes developed to compute general force-free fields in the solar corona. The study presented includes a set of illustrative multipolar field solutions to address the magnetohydrodynamics (MHD) issues underlying the observation that the solar corona has a statistical preference for negative and positive magnetic helicities in its northern and southern hemispheres, respectively; a hemispherical effect, unchanging as the Sun's global field reverses polarity in successive eleven-year cycles. Generalizing these force-free fields to the separable form B=(H(θ,φ))/(r{sup n+2}) promises field solutions of even richer topological varieties but allowing for φ-dependence greatly complicates the governing equations that have remained intractable. The axisymmetric results obtained are discussed in relation to this generalization and the Parker Magnetostatic Theorem. The axisymmetric solutions are mathematically related to a family of 3D time-dependent ideal MHD solutions for a polytropic fluid of index γ = 4
Representing grounding line migration in synchronous coupling between a marine ice sheet model and a z-coordinate ocean model

Science.gov (United States)

Goldberg, D. N.; Snow, K.; Holland, P.; Jordan, J. R.; Campin, J.-M.; Heimbach, P.; Arthern, R.; Jenkins, A.

2018-05-01

Synchronous coupling is developed between an ice sheet model and a z-coordinate ocean model (the MITgcm). A previously-developed scheme to allow continuous vertical movement of the ice-ocean interface of a floating ice shelf ("vertical coupling") is built upon to allow continuous movement of the grounding line, or point of floatation of the ice sheet ("horizontal coupling"). Horizontal coupling is implemented through the maintenance of a thin layer of ocean ( ∼ 1 m) under grounded ice, which is inflated into the real ocean as the ice ungrounds. This is accomplished through a modification of the ocean model's nonlinear free surface evolution in a manner akin to a hydrological model in the presence of steep bathymetry. The coupled model is applied to a number of idealized geometries and shown to successfully represent ocean-forced marine ice sheet retreat while maintaining a continuous ocean circulation.
Geometry of thin liquid sheet flows

Science.gov (United States)

Chubb, Donald L.; Calfo, Frederick D.; Mcconley, Marc W.; Mcmaster, Matthew S.; Afjeh, Abdollah A.

1994-01-01

Incompresible, thin sheet flows have been of research interest for many years. Those studies were mainly concerned with the stability of the flow in a surrounding gas. Squire was the first to carry out a linear, invicid stability analysis of sheet flow in air and compare the results with experiment. Dombrowski and Fraser did an experimental study of the disintegration of sheet flows using several viscous liquids. They also detected the formulation of holes in their sheet flows. Hagerty and Shea carried out an inviscid stability analysis and calculated growth rates with experimental values. They compared their calculated growth rates with experimental values. Taylor studied extensively the stability of thin liquid sheets both theoretically and experimentally. He showed that thin sheets in a vacuum are stable. Brown experimentally investigated thin liquid sheet flows as a method of application of thin films. Clark and Dumbrowski carried out second-order stability analysis for invicid sheet flows. Lin introduced viscosity into the linear stability analysis of thin sheet flows in a vacuum. Mansour and Chigier conducted an experimental study of the breakup of a sheet flow surrounded by high-speed air. Lin et al. did a linear stability analysis that included viscosity and a surrounding gas. Rangel and Sirignano carried out both a linear and nonlinear invisid stability analysis that applies for any density ratio between the sheet liquid and the surrounding gas. Now there is renewed interest in sheet flows because of their possible application as low mass radiating surfaces. The objective of this study is to investigate the fluid dynamics of sheet flows that are of interest for a space radiator system. Analytical expressions that govern the sheet geometry are compared with experimental results. Since a space radiator will operate in a vacuum, the analysis does not include any drag force on the sheet flow.
Force-free state in a superconducting single crystal and angle-dependent vortex helical instability

Science.gov (United States)

del Valle, J.; Gomez, A.; Gonzalez, E. M.; Manas-Valero, S.; Coronado, E.; Vicent, J. L.

2017-06-01

Superconducting 2 H -NbS e2 single crystals show intrinsic low pinning values. Therefore, they are ideal materials with which to explore fundamental properties of vortices. (V , I ) characteristics are the experimental data we have used to investigate the dissipation mechanisms in a rectangular-shaped 2 H -NbS e2 single crystal. Particularly, we have studied dissipation behavior with magnetic fields applied in the plane of the crystal and parallel to the injected currents, i.e., in the force-free state where the vortex helical instability governs the vortex dynamics. In this regime, the data follow the elliptic critical state model and the voltage dissipation shows an exponential dependence, V ∝eα (I -IC ∥ ) , IC ∥ being the critical current in the force-free configuration and α a linear temperature-dependent parameter. Moreover, this exponential dependence can be observed for in-plane applied magnetic fields up to 40° off the current direction, which implies that the vortex helical instability plays a role in dissipation even out of the force-free configuration.
Free-standing biomimetic polymer membrane imaged with atomic force microscopy

DEFF Research Database (Denmark)

Rein, Christian; Pszon-Bartosz, Kamila Justyna; Jensen, Karin Bagger Stibius

2011-01-01

Fluid polymeric biomimetic membranes are probed with atomic force microscopy (AFM) using probes with both normal tetrahedrally shaped tips and nanoneedle-shaped Ag2Ga rods. When using nanoneedle probes, the collected force volume data show three distinct membrane regions which match the expected...... membrane structure when spanning an aperture in a hydrophobic scaffold. The method used provides a general method for mapping attractive fluid surfaces. In particular, the nanoneedle probing allows for characterization of free-standing biomimetic membranes with thickness on the nanometer scale suspended...... over 300-μm-wide apertures, where the membranes are stable toward hundreds of nanoindentations without breakage. © 2010 American Chemical Society....
Cogging Force Issues of Permanent Magnet Linear Generator for Electric Vehicle

Directory of Open Access Journals (Sweden)

Izzeldin Idris Abdalla

2017-09-01

Full Text Available Alternatives to hydraulic drives that used on vehicles are necessary in order to reduce the Carbon dioxide (CO2 emission and oil consumption. Hence better performance and efficiency of the vehicles can be achieved by using free piston engine, in which the piston reciprocate linearly with a permanent magnet linear generator (PMLG without the need of a crankshaft. The PMLG has high performance, but suffering from the cogging force. The cogging force induces undesired vibration and acoustic noise and makes a ripple in the thrust force. Moreover, the cogging force deteriorates the control characteristics, particularly in terms of the position control and speed precisely. This paper proposes Somaloy to replace the laminated silicon steel sheets in order to reduce the cogging force in a PMLG. Through a finite-element analysis, it has been shown that, the stator core made of Somaloy minimizes the cogging force of the PMLG, moreover, giving larger flux-linkage and back-electromotive force (B-EMF, respectively.
Combined free and forced convection flow in a rotating channel with ...

African Journals Online (AJOL)

user

free and forced convection flow of a viscous incompressible electrically conducting fluid in a .... The boundary conditions (10) and (11), in dimensionless form, become ...... On hydromagnetic Flow and heat transfer in a rotating fluid past an infinite porous ... Electrically Conducting Fluid in Non-Rotating and Rotating Media”.
Development of Wearable Sheet-Type Shear Force Sensor and Measurement System that is Insusceptible to Temperature and Pressure.

Science.gov (United States)

Toyama, Shigeru; Tanaka, Yasuhiro; Shirogane, Satoshi; Nakamura, Takashi; Umino, Tokio; Uehara, Ryo; Okamoto, Takuma; Igarashi, Hiroshi

2017-07-31

A sheet-type shear force sensor and a measurement system for the sensor were developed. The sensor has an original structure where a liquid electrolyte is filled in a space composed of two electrode-patterned polymer films and an elastic rubber ring. When a shear force is applied on the surface of the sensor, the two electrode-patterned films mutually move so that the distance between the internal electrodes of the sensor changes, resulting in current increase or decrease between the electrodes. Therefore, the shear force can be calculated by monitoring the current between the electrodes. Moreover, it is possible to measure two-dimensional shear force given that the sensor has multiple electrodes. The diameter and thickness of the sensor head were 10 mm and 0.7 mm, respectively. Additionally, we also developed a measurement system that drives the sensor, corrects the baseline of the raw sensor output, displays data, and stores data as a computer file. Though the raw sensor output was considerably affected by the surrounding temperature, the influence of temperature was drastically decreased by introducing a simple arithmetical calculation. Moreover, the influence of pressure simultaneously decreased after the same calculation process. A demonstrative measurement using the sensor revealed the practical usefulness for on-site monitoring.
Free Energy Reconstruction from Logarithmic Mean-Force Dynamics Using Multiple Nonequilibrium Trajectories.

Science.gov (United States)

Morishita, Tetsuya; Yonezawa, Yasushige; Ito, Atsushi M

2017-07-11

Efficient and reliable estimation of the mean force (MF), the derivatives of the free energy with respect to a set of collective variables (CVs), has been a challenging problem because free energy differences are often computed by integrating the MF. Among various methods for computing free energy differences, logarithmic mean-force dynamics (LogMFD) [ Morishita et al., Phys. Rev. E 2012 , 85 , 066702 ] invokes the conservation law in classical mechanics to integrate the MF, which allows us to estimate the free energy profile along the CVs on-the-fly. Here, we present a method called parallel dynamics, which improves the estimation of the MF by employing multiple replicas of the system and is straightforwardly incorporated in LogMFD or a related method. In the parallel dynamics, the MF is evaluated by a nonequilibrium path-ensemble using the multiple replicas based on the Crooks-Jarzynski nonequilibrium work relation. Thanks to the Crooks relation, realizing full-equilibrium states is no longer mandatory for estimating the MF. Additionally, sampling in the hidden subspace orthogonal to the CV space is highly improved with appropriate weights for each metastable state (if any), which is hardly achievable by typical free energy computational methods. We illustrate how to implement parallel dynamics by combining it with LogMFD, which we call logarithmic parallel dynamics (LogPD). Biosystems of alanine dipeptide and adenylate kinase in explicit water are employed as benchmark systems to which LogPD is applied to demonstrate the effect of multiple replicas on the accuracy and efficiency in estimating the free energy profiles using parallel dynamics.
Tradução e adaptação transcultural do "Harris Hip Score modificado por Byrd" Translation and transcultural adaptation of the modified Harris Hip Score

Directory of Open Access Journals (Sweden)

Rodrigo Pereira Guimarães

2010-01-01

Full Text Available OBJETIVO: As artroscopias do quadril têm sido utilizadas tanto para fins diagnósticos, como para fins terapêuticos, fazendo parte do arsenal rotineiro dos cirurgiões do quadril. Devido a necessidade de avaliação dos resultados artroscópicos, Byrd propôs a modificação do "Harris Hip Score", realizando a avaliação da dor e função. O objetivo deste estudo foi traduzir e adaptar transculturalmente o protocolo de avaliação do "Harris Hip Score" modificado por Byrd, utilizado nas artroscopias do quadril. MÉTODO: O método utilizado constituiu em: 1 tradução inicial, 2 retrotradução, 3 pré - teste e 4 teste definitivo. RESULTADOS: A versão em português foi aplicada em 30 pacientes com afecções do quadril para verificar o nível de compreensão do protocolo. Foram realizadas mudanças e substituições de termos e expressões que não foram entendidas pelos pacientes durante o pré-teste e realizada a versão final em consenso. Novamente a versão final do questionário foi aplicada com 100% de entendimento pelos pacientes. CONCLUSÃO: disponibiliza-se assim a versão final em português do questionário "Harris Hip Score" modificado por Byrd. A validação desta versão já está em desenvolvimento.OBJECTIVE: Hip arthroscopy has been used for diagnostic as well as therapeutic purposes, and it is part of the daily arsenal of hip surgeons. Due to the need for arthroscopic evaluation of the results, Byrd proposed a modification of the Harris Hip Score by assessing pain and function. This study aimed to translate and cross-culturally adapt the evaluation protocol of the modified Harris Hip Score used in hip arthroscopies. METHOD: The method used consisted of: 1 an initial translation, 2 a back translation, 3 a pre-test and 4 a final test. RESULTS: The Portuguese version was used with 30 patients with hip disorders to determine the level of comprehension of the protocol. Expressions which were not understood by patients during the
A NEW CODE FOR NONLINEAR FORCE-FREE FIELD EXTRAPOLATION OF THE GLOBAL CORONA

International Nuclear Information System (INIS)

Jiang Chaowei; Feng Xueshang; Xiang Changqing

2012-01-01

Reliable measurements of the solar magnetic field are still restricted to the photosphere, and our present knowledge of the three-dimensional coronal magnetic field is largely based on extrapolations from photospheric magnetograms using physical models, e.g., the nonlinear force-free field (NLFFF) model that is usually adopted. Most of the currently available NLFFF codes have been developed with computational volume such as a Cartesian box or a spherical wedge, while a global full-sphere extrapolation is still under development. A high-performance global extrapolation code is in particular urgently needed considering that the Solar Dynamics Observatory can provide a full-disk magnetogram with resolution up to 4096 × 4096. In this work, we present a new parallelized code for global NLFFF extrapolation with the photosphere magnetogram as input. The method is based on the magnetohydrodynamics relaxation approach, the CESE-MHD numerical scheme, and a Yin-Yang spherical grid that is used to overcome the polar problems of the standard spherical grid. The code is validated by two full-sphere force-free solutions from Low and Lou's semi-analytic force-free field model. The code shows high accuracy and fast convergence, and can be ready for future practical application if combined with an adaptive mesh refinement technique.
The Multimedia Piers-Harris Children's Self-Concept Scale 2: Its Psychometric Properties, Equivalence with the Paper-and-Pencil Version, and Respondent Preferences.

Science.gov (United States)

Flahive, Mon-hsin Wang; Chuang, Ying-Chih; Li, Chien-Mo

2015-01-01

A multimedia version of Piers-Harris Children's Self-Concept Scale 2 (Piers-Harris 2) was created with audio and cartoon animation to facilitate the measurement of self-concept among younger children. This study aimed to assess the psychometric qualities of the computer version of Piers-Harris 2 scores, examine its score equivalence with the paper-and-pencil version, and survey the respondent preference of the two versions. Two hundred and forty eight Taiwanese students from the first to fourth grade were recruited. In regard to the psychometric properties, high internal consistency (α = .91) was found for the total score of multimedia Piers-Harris 2. High interscale correlations (.77 to .83) of the multimedia Piers-Harris 2 scores and the results of confirmatory factor analysis suggested the multimedia Piers-Harris 2 contained good structural characteristics. The scores of the multimedia Piers-Harris 2 also had significant correlations with the scores of the Elementary School Children's Self Concept Scale. The equality of convergence and criterion-related validities of Piers-Harris 2 scores for the multimedia and paper-and-pencil versions and the results of ICCs between the scores of the multimedia and paper-and-pencil Piers-Harris 2 suggested their high level of equivalence. Participants showed more positive attitudes towards the multimedia version.
The Multimedia Piers-Harris Children's Self-Concept Scale 2: Its Psychometric Properties, Equivalence with the Paper-and-Pencil Version, and Respondent Preferences

Science.gov (United States)

Flahive, Mon-hsin Wang; Chuang, Ying-Chih; Li, Chien-Mo

2015-01-01

A multimedia version of Piers-Harris Children's Self-Concept Scale 2 (Piers-Harris 2) was created with audio and cartoon animation to facilitate the measurement of self-concept among younger children. This study aimed to assess the psychometric qualities of the computer version of Piers-Harris 2 scores, examine its score equivalence with the paper-and-pencil version, and survey the respondent preference of the two versions. Two hundred and forty eight Taiwanese students from the first to fourth grade were recruited. In regard to the psychometric properties, high internal consistency (α = .91) was found for the total score of multimedia Piers-Harris 2. High interscale correlations (.77 to .83) of the multimedia Piers-Harris 2 scores and the results of confirmatory factor analysis suggested the multimedia Piers-Harris 2 contained good structural characteristics. The scores of the multimedia Piers-Harris 2 also had significant correlations with the scores of the Elementary School Children’s Self Concept Scale. The equality of convergence and criterion-related validities of Piers-Harris 2 scores for the multimedia and paper-and-pencil versions and the results of ICCs between the scores of the multimedia and paper-and-pencil Piers-Harris 2 suggested their high level of equivalence. Participants showed more positive attitudes towards the multimedia version. PMID:26252499
Disposal sheet for preventing scattering of radioactive contaminated material

International Nuclear Information System (INIS)

Miyasaka, Shun-ichi; Kurioka, Hitoshi; Nakamura, Kenjiro.

1990-01-01

Upon disposal of vinyl sheets at the final stage of dismantling operation for nuclear buildings, etc., radioactive contaminated materials caused by cutting concretes, etc. remain on the sheets. In view of the above, members capable of restoring original shape due to the temperature difference are attached to the sheet main body so that the sheet main body may be folded into a bag-like shape. Since the members as described above are bent upon temperature elevation in the sheets, the sheet main body is pulled by the members and then spontaneously folded into a bag-like shape. As a result, the radioactive contaminated materials remaining on the sheets are wrapped into the sheet main body free from touch to operator's hands or without scattering to the surrounding. This can prevent operator's external and internal exposure. (T.M.)

Harry Potter interneti lugemistoas / Anu Ratasep, Hele Kriisa

Index Scriptorium Estoniae

Ratasep, Anu

2001-01-01

2000.a. viie Tallinna kooli osavõtul toimunud projektist R-LIIT, mille käigus valiti üks raamat (J.K. Rowling "Harry Potter ja tarkade kivi") ning arutleti selle üle nii koolides kui Interneti vahendusel. Osalesid eesti ja vene õppekeelega koolid, projektiga lisandus eri rahvusest noorte integratsiooni idee
Sheet, ligament and droplet formation in swirling primary atomization

Directory of Open Access Journals (Sweden)

Changxiao Shao

2018-04-01

Full Text Available We report direct numerical simulations of swirling liquid atomization to understand the physical mechanism underlying the sheet breakup of a non-turbulent liquid swirling jet which lacks in-depth investigation. The volume-of-fluid (VOF method coupled with adapted mesh refinement (AMR technique in GERRIS code is employed in the present simulation. The mechanisms of sheet, ligament and droplet formation are investigated. It is observed that the olive-shape sheet structure is similar to the experimental result qualitatively. The numerical results show that surface tension, pressure difference and swirling effect contribute to the contraction and extension of liquid sheet. The ligament formation is partially at the sheet rim or attributed to the extension of liquid hole. Especially, the movement of hairpin vortex exerts by an anti-radial direction force to the sheet surface and leads to the sheet thinness. In addition, droplet formation is attributed to breakup of ligament and central sheet.
Sheet, ligament and droplet formation in swirling primary atomization

Science.gov (United States)

Shao, Changxiao; Luo, Kun; Chai, Min; Fan, Jianren

2018-04-01

We report direct numerical simulations of swirling liquid atomization to understand the physical mechanism underlying the sheet breakup of a non-turbulent liquid swirling jet which lacks in-depth investigation. The volume-of-fluid (VOF) method coupled with adapted mesh refinement (AMR) technique in GERRIS code is employed in the present simulation. The mechanisms of sheet, ligament and droplet formation are investigated. It is observed that the olive-shape sheet structure is similar to the experimental result qualitatively. The numerical results show that surface tension, pressure difference and swirling effect contribute to the contraction and extension of liquid sheet. The ligament formation is partially at the sheet rim or attributed to the extension of liquid hole. Especially, the movement of hairpin vortex exerts by an anti-radial direction force to the sheet surface and leads to the sheet thinness. In addition, droplet formation is attributed to breakup of ligament and central sheet.
A Non-Linear Force-Free Field Model for the Evolving Magnetic Structure of Solar Filaments

Science.gov (United States)

Mackay, Duncan H.; van Ballegooijen, A. A.

2009-12-01

In this paper the effect of a small magnetic element approaching the main body of a solar filament is considered through non-linear force-free field modeling. The filament is represented by a series of magnetic dips. Once the dips are calculated, a simple hydrostatic atmosphere model is applied to determine which structures have sufficient column mass depth to be visible in Hα. Two orientations of the bipole are considered, either parallel or anti-parallel to the overlying arcade. The magnetic polarity that lies closest to the filament is then advected towards the filament. Initially for both the dominant and minority polarity advected elements, right/left bearing barbs are produced for dextral/sinsitral filaments. The production of barbs due to dominant polarity elements is a new feature. In later stages the filament breaks into two dipped sections and takes a highly irregular, non-symmetrical form with multiple pillars. The two sections are connected by field lines with double dips even though the twist of the field is less than one turn. Reconnection is not found to play a key role in the break up of the filament. The non-linear force-free fields produce very different results to extrapolated linear-force free fields. For the cases considered here the linear force-free field does not produce the break up of the filament nor the production of barbs as a result of dominant polarity elements.
Air Force Senior Leaders

Science.gov (United States)

Force TV Radio Week in Photos About Us Air Force Senior Leaders SECAF CSAF CMSAF Biographies Adjunct Professors Senior Mentor Biographies Fact Sheets Commander's Call Topics CCT Archive CSAF Reading List 2017 Media Sites Site Registration Contact Us Search AF.mil: Home > About Us > Air Force Senior Leaders
Effect of gamma irradiation on the structural, mechanical and optical properties of polytetrafluoroethylene sheet

Science.gov (United States)

Mohammadian-Kohol, M.; Asgari, M.; Shakur, H. R.

2018-04-01

In this study, the effects of gamma radiation on the chemical structure, mechanical and optical properties of polytetrafluoroethylene (PTFE) sheet were investigated with various doses up to 12 kGy. The chemical changes in the structure were studied by FTIR spectroscopy. Also, effects of radiation on the different mechanical parameters such as Young's modulus, toughness, strain, and stress were studied at the maximum tolerable force and the fracture points. Furthermore, changing the various optical parameters such as absorption coefficient, Urbach energy, optical band gaps, refractive index, optical dispersion parameters and plasma resonance frequency were studied by UV-visible spectroscopy. Formation of a band at 1594 cm-1, which was belonged to double carbon bonds, indicated that chain-scission was occurred at 12 kGy gamma irradiation dose. As well, the mechanical results showed an increase in the elastic behavior of PTFE sheets and a decrease in the plastic behavior of it with absorbed dose increasing. Moreover, the results showed that gamma irradiation can effectively change the various optical properties of PTFE sheets due to different phenomena such as degradation of the main chains, occurring chain-scission, formation of free radicals and cross-linking in the polymer structure.
Axisymmetric force-free states and relaxation of a spheroidal spheromak

International Nuclear Information System (INIS)

Throumoulopoulos, G.N.; Pantis, G.

1990-01-01

Axisymmetric force-free equilibrium eigenstates for a prolate as well as an oblate spheroidal Spheromak with arbitrary elongation are obtained. In the framework of the Woltjer-Taylor relaxation theory the relaxed states are also identified. A simple hypothesis for the relaxation process is introduced, which implies that the plasma relaxes from multitoroidal formations to a singly toroidal configuration, in qualitative agreement with experimental results. (author)
Axisymmetric force-free states and relaxation of a spheroidal spheromak

International Nuclear Information System (INIS)

Throumoulopoulos, G.N.; Pantis, G.

1990-01-01

Axisymmetric force-free equilibrium eigenstates for a prolate as well as an oblate spheroidal spheromak with arbitrary elongation are obtained. In the framework of the Woltjer-Taylor relaxation theory the relaxed states are also identified. A simple hypothesis for the relaxation process is introduced which implies that the plasma relaxes from multitoroidal formations to a singly toroidal configuration in qualitative agreement with experimental results. (Author)
Wave excited motion of a body floating on water confined between two semi-infinite ice sheets

Science.gov (United States)

Ren, K.; Wu, G. X.; Thomas, G. A.

2016-12-01

The wave excited motion of a body floating on water confined between two semi-infinite ice sheets is investigated. The ice sheet is treated as an elastic thin plate and water is treated as an ideal and incompressible fluid. The linearized velocity potential theory is adopted in the frequency domain and problems are solved by the method of matched eigenfunctions expansion. The fluid domain is divided into sub-regions and in each sub-region the velocity potential is expanded into a series of eigenfunctions satisfying the governing equation and the boundary conditions on horizontal planes including the free surface and ice sheets. Matching is conducted at the interfaces of two neighbouring regions to ensure the continuity of the pressure and velocity, and the unknown coefficients in the expressions are obtained as a result. The behaviour of the added mass and damping coefficients of the floating body with the effect of the ice sheets and the excitation force are analysed. They are found to vary oscillatorily with the wave number, which is different from that for a floating body in the open sea. The motion of the body confined between ice sheets is investigated, in particular its resonant behaviour with extremely large motion found to be possible under certain conditions. Standing waves within the polynya are also observed.
Elastic Buckling Behaviour of General Multi-Layered Graphene Sheets

Directory of Open Access Journals (Sweden)

Rong Ming Lin

2015-04-01

Full Text Available Elastic buckling behaviour of multi-layered graphene sheets is rigorously investigated. Van der Waals forces are modelled, to a first order approximation, as linear physical springs which connect the nodes between the layers. Critical buckling loads and their associated modes are established and analyzed under different boundary conditions, aspect ratios and compressive loading ratios in the case of graphene sheets compressed in two perpendicular directions. Various practically possible loading configurations are examined and their effect on buckling characteristics is assessed. To model more accurately the buckling behaviour of multi-layered graphene sheets, a physically more representative and realistic mixed boundary support concept is proposed and applied. For the fundamental buckling mode under mixed boundary support, the layers with different boundary supports deform similarly but non-identically, leading to resultant van der Waals bonding forces between the layers which in turn affect critical buckling load. Results are compared with existing known solutions to illustrate the excellent numerical accuracy of the proposed modelling approach. The buckling characteristics of graphene sheets presented in this paper form a comprehensive and wholesome study which can be used as potential structural design guideline when graphene sheets are employed for nano-scale sensing and actuation applications such as nano-electro-mechanical systems.
76 FR 65775 - Environmental Impact Statement: Harris County, Texas

Science.gov (United States)

2011-10-24

... DEPARTMENT OF TRANSPORTATION Federal Highway Administration Environmental Impact Statement: Harris... (TxDOT) are issuing this notice to advise the public that an environmental impact statement (EIS) will..., Efficient Transportation Equity Act: A Legacy for Users (SAFETEA-LU) and the National Environmental Policy...
Indentation of a floating elastic sheet: geometry versus applied tension.

Science.gov (United States)

Box, Finn; Vella, Dominic; Style, Robert W; Neufeld, Jerome A

2017-10-01

The localized loading of an elastic sheet floating on a liquid bath occurs at scales from a frog sitting on a lily pad to a volcano supported by the Earth's tectonic plates. The load is supported by a combination of the stresses within the sheet (which may include applied tensions from, for example, surface tension) and the hydrostatic pressure in the liquid. At the same time, the sheet deforms, and may wrinkle, because of the load. We study this problem in terms of the (relatively weak) applied tension and the indentation depth. For small indentation depths, we find that the force-indentation curve is linear with a stiffness that we characterize in terms of the applied tension and bending stiffness of the sheet. At larger indentations, the force-indentation curve becomes nonlinear and the sheet is subject to a wrinkling instability. We study this wrinkling instability close to the buckling threshold and calculate both the number of wrinkles at onset and the indentation depth at onset, comparing our theoretical results with experiments. Finally, we contrast our results with those previously reported for very thin, highly bendable membranes.
A Semiotic Analysis on Movie Posters of Harry Potter and the Deathly Hallows

OpenAIRE

BURTY, ANNISA DHANIA

2013-01-01

Burty, Annisa Dhania. 2013., A Semiotic Analysis on Movie Posters of Harry Potter and the Deathly Hallows. Study Program of English, Universitas Brawijaya. Supervisor: Iis Nur Rodliyah; Co-supervisor: Emy Sudarwati Movie poster has a commercial purpose as medium to advertise a movie. It delivers what the movie is all about. In this study, the writer chooses the movie poster of Harry Potter and the Deathly Hallowsas the object to be analyzed using semiotic study. This sequel is divided into t...
75 FR 80547 - Carolina Power & Light Company, Shearon Harris Nuclear Power Plant, Unit No. 1; Exemption

Science.gov (United States)

2010-12-22

..., Shearon Harris Nuclear Power Plant, Unit No. 1; Exemption 1.0 Background Carolina Power & Light Company... operation of the Shearon Harris Nuclear Power Plant (HNP), Unit 1. The license provides, among other things... request to generically extend the rule's compliance date for all operating nuclear power plants, but noted...
Sneaking out after Dark: Resistance, Agency, and the Postmodern Child in JK Rowling's Harry Potter Series

Science.gov (United States)

Chappell, Drew

2008-01-01

JK Rowling's "Harry Potter" novels situate their child protagonists in a fantastical world side by side with present day British society. Through the characters' choices and realizations, young readers are introduced to the complexities and ambiguities of the contemporary world. Harry and his friends embrace these qualities of postmodern…
Assessing Tuition- and Debt-Free Higher Education. NASFAA Task Force Report

Science.gov (United States)

National Association of Student Financial Aid Administrators, 2017

2017-01-01

The Assessing Tuition- and Debt-Free Higher Education Task Force was convened in July 2016. Charged by the National Association of Student Financial Aid Administrators's (NASFAA's) Board of Directors with evaluating the existing landscape of state and local promise programs with a focus on scaling such models to the national level, the task force…
Force-free magnetic fields - The magneto-frictional method

Science.gov (United States)

Yang, W. H.; Sturrock, P. A.; Antiochos, S. K.

1986-01-01

The problem under discussion is that of calculating magnetic field configurations in which the Lorentz force j x B is everywhere zero, subject to specified boundary conditions. We choose to represent the magnetic field in terms of Clebsch variables in the form B = grad alpha x grad beta. These variables are constant on any field line so that each field line is labeled by the corresponding values of alpha and beta. When the field is described in this way, the most appropriate choice of boundary conditions is to specify the values of alpha and beta on the bounding surface. We show that such field configurations may be calculated by a magneto-frictional method. We imagine that the field lines move through a stationary medium, and that each element of magnetic field is subject to a frictional force parallel to and opposing the velocity of the field line. This concept leads to an iteration procedure for modifying the variables alpha and beta, that tends asymptotically towards the force-free state. We apply the method first to a simple problem in two rectangular dimensions, and then to a problem of cylindrical symmetry that was previously discussed by Barnes and Sturrock (1972). In one important respect, our new results differ from the earlier results of Barnes and Sturrock, and we conclude that the earlier article was in error.
THE INFLUENCE OF SPATIAL RESOLUTION ON NONLINEAR FORCE-FREE MODELING

Energy Technology Data Exchange (ETDEWEB)

DeRosa, M. L.; Schrijver, C. J. [Lockheed Martin Solar and Astrophysics Laboratory, 3251 Hanover St. B/252, Palo Alto, CA 94304 (United States); Wheatland, M. S.; Gilchrist, S. A. [Sydney Institute for Astronomy, School of Physics, The University of Sydney, Sydney, NSW 2006 (Australia); Leka, K. D.; Barnes, G. [NorthWest Research Associates, 3380 Mitchell Ln., Boulder, CO 80301 (United States); Amari, T.; Canou, A. [CNRS, Centre de Physique Théorique de l’École Polytechnique, F-91128, Palaiseau Cedex (France); Thalmann, J. K. [Institute of Physics/IGAM, University of Graz, Universitätsplatz 5, A-8010 Graz (Austria); Valori, G. [Mullard Space Science Laboratory, University College London, Holmbury St. Mary, Dorking, Surrey, RH5 6NT (United Kingdom); Wiegelmann, T. [Max-Planck-Institut für Sonnensystemforschung, Justus-von-Liebig-Weg 3, D-37077, Göttingen (Germany); Malanushenko, A. [Department of Physics, Montana State University, Bozeman, MT 59717 (United States); Sun, X. [W. W. Hansen Experimental Physics Laboratory, Stanford University, Stanford, CA 94305 (United States); Régnier, S. [Department of Mathematics and Information Sciences, Faculty of Engineering and Environment, Northumbria University, Newcastle-Upon-Tyne, NE1 8ST (United Kingdom)

2015-10-01

The nonlinear force-free field (NLFFF) model is often used to describe the solar coronal magnetic field, however a series of earlier studies revealed difficulties in the numerical solution of the model in application to photospheric boundary data. We investigate the sensitivity of the modeling to the spatial resolution of the boundary data, by applying multiple codes that numerically solve the NLFFF model to a sequence of vector magnetogram data at different resolutions, prepared from a single Hinode/Solar Optical Telescope Spectro-Polarimeter scan of NOAA Active Region 10978 on 2007 December 13. We analyze the resulting energies and relative magnetic helicities, employ a Helmholtz decomposition to characterize divergence errors, and quantify changes made by the codes to the vector magnetogram boundary data in order to be compatible with the force-free model. This study shows that NLFFF modeling results depend quantitatively on the spatial resolution of the input boundary data, and that using more highly resolved boundary data yields more self-consistent results. The free energies of the resulting solutions generally trend higher with increasing resolution, while relative magnetic helicity values vary significantly between resolutions for all methods. All methods require changing the horizontal components, and for some methods also the vertical components, of the vector magnetogram boundary field in excess of nominal uncertainties in the data. The solutions produced by the various methods are significantly different at each resolution level. We continue to recommend verifying agreement between the modeled field lines and corresponding coronal loop images before any NLFFF model is used in a scientific setting.
Validation and Design of Sheet Retrofits

Science.gov (United States)

2010-10-31

Air Force Research Laboratory (AFRL), Tyndall Air Force Base, FL, and documented in this report used a polypropylene sheet that exhibited a balance of...The packaging of Loctite 3030 and DP-8010 indicates that they have a worklife of 3 min. and 10 min., respectively. Both adhesives require minimal... worklife . They then used the same procedure to apply the DP-8010 to the remaining three samples. Again, they prepared two samples with a smooth bonding
Connecting the Generations: Memory, Magic, and Harry Potter.

Science.gov (United States)

Radigan, Winifred M.

2001-01-01

Explains that the author reads the Harry Potter books because of their impact on middle-school-age kids and their appeal to children ages 9 to 15. Explains also that she works in professional development, especially literacy, and that she connects kids and teachers to the books. Admits that she reads the books because "they are wonderful." (SG)

Harry Potter -sarjan henkilönnimistö sukupuolisuuden ilmentäjänä

OpenAIRE

Nitovuori, M. (Maiju)

2015-01-01

Tiivistelmä Tässä tutkimuksessa käsitellään lastenkirjallisuutta, kirjallisuuden nimistöntutkimusta, Harry Potter -kirjasarjan henkilöhahmojen sukupuolisuutta sekä henkilönnimistön ilmentämää sukupuolisuutta. Tutkimuksen teoriaosuudessa käsitellään ensin mainittuja ja analyysiosio koostuu henkilönnimistön sukupuolisuuden tarkastelusta. Ensisijainen tutkimuskysymys on “Miten Harry Potter -sarjan henkilönnimistö ilmentää suku...
Effects of electromechanical resonance on photocatalytic reduction of the free-hanging graphene oxide sheets

International Nuclear Information System (INIS)

Ostovari, F.; Abdi, Y.; Darbari, S.; Ghasemi, F.

2013-01-01

In this report we present a simple, low-temperature method which is compatible with standard technology, to achieve graphene-based devices in large quantity. In this approach we take advantage of photocatalytic behavior of TiO 2 to achieve photocatalytic reduction of chemically synthesized graphene oxide (GO) sheets. TiO 2 nanoparticles have been deposited on GO sheets hanging from Au/SiO 2 /Si interdigital electrodes to realize TiO 2 /GO heterostructures. We investigated photocatalytic activity of TiO 2 nanoparticles in the presence of UV-illumination, to reduce the GO sheets. Based on the Raman spectroscopy, the photocatalytic activity of TiO 2 nanoparticles resulted in a decrease in the number of C–O bonds. Electrical measurements show that graphene sheets with the controlled electrical conductivity were obtained, so that higher illumination time led to higher conductivity and better reduction of GO sheets. Also, strain-induced photocatalytic reduction of the GO sheets has been investigated by their electrical characteristics. It has been shown for the first time that the electromechanical-induced strain enhances the photocatalytic behavior of the fabricated TiO 2 /GO heterostructure significantly.
Effects of electromechanical resonance on photocatalytic reduction of the free-hanging graphene oxide sheets

Energy Technology Data Exchange (ETDEWEB)

Ostovari, F.; Abdi, Y., E-mail: y.abdi@ut.ac.ir [University of Tehran, Nano-Physics Research Laboratory, Department of Physics (Iran, Islamic Republic of); Darbari, S. [Tarbiat Modarres University (Iran, Islamic Republic of); Ghasemi, F. [University of Tehran, Nano-Physics Research Laboratory, Department of Physics (Iran, Islamic Republic of)

2013-04-15

In this report we present a simple, low-temperature method which is compatible with standard technology, to achieve graphene-based devices in large quantity. In this approach we take advantage of photocatalytic behavior of TiO{sub 2} to achieve photocatalytic reduction of chemically synthesized graphene oxide (GO) sheets. TiO{sub 2} nanoparticles have been deposited on GO sheets hanging from Au/SiO{sub 2}/Si interdigital electrodes to realize TiO{sub 2}/GO heterostructures. We investigated photocatalytic activity of TiO{sub 2} nanoparticles in the presence of UV-illumination, to reduce the GO sheets. Based on the Raman spectroscopy, the photocatalytic activity of TiO{sub 2} nanoparticles resulted in a decrease in the number of C-O bonds. Electrical measurements show that graphene sheets with the controlled electrical conductivity were obtained, so that higher illumination time led to higher conductivity and better reduction of GO sheets. Also, strain-induced photocatalytic reduction of the GO sheets has been investigated by their electrical characteristics. It has been shown for the first time that the electromechanical-induced strain enhances the photocatalytic behavior of the fabricated TiO{sub 2}/GO heterostructure significantly.
Complex world-sheets from N=2 strings

International Nuclear Information System (INIS)

Barbon, J.L.F.

1996-01-01

We study some properties of target space strings constructed from (2,1) heterotic strings. We argue that world-sheet complexification is a general property of the bosonic sector of such target world-sheets. We give a target space interpretation of this fact and relate it to the non-gaussian nature of free string field theory. We provide several one-loop calculations supporting the stringy construction of critical world-sheets in terms of (2,1) models. Using finite-temperature boundary conditions in the underlying (2,1) string we obtain non-chiral target space spin structures, and point out some of the problems arising for chiral spin structures, such as the heterotic world-sheet. To this end, we study the torus partition function of the corresponding asymmetric orbifold of the (2,1) string. (orig.)
NONLINEAR FORCE-FREE MAGNETIC FIELD FITTING TO CORONAL LOOPS WITH AND WITHOUT STEREOSCOPY

International Nuclear Information System (INIS)

Aschwanden, Markus J.

2013-01-01

We developed a new nonlinear force-free magnetic field (NLFFF) forward-fitting algorithm based on an analytical approximation of force-free and divergence-free NLFFF solutions, which requires as input a line-of-sight magnetogram and traced two-dimensional (2D) loop coordinates of coronal loops only, in contrast to stereoscopically triangulated three-dimensional loop coordinates used in previous studies. Test results of simulated magnetic configurations and from four active regions observed with STEREO demonstrate that NLFFF solutions can be fitted with equal accuracy with or without stereoscopy, which relinquishes the necessity of STEREO data for magnetic modeling of active regions (on the solar disk). The 2D loop tracing method achieves a 2D misalignment of μ 2 = 2.°7 ± 1.°3 between the model field lines and observed loops, and an accuracy of ≈1.0% for the magnetic energy or free magnetic energy ratio. The three times higher spatial resolution of TRACE or SDO/AIA (compared with STEREO) also yields a proportionally smaller misalignment angle between model fit and observations. Visual/manual loop tracings are found to produce more accurate magnetic model fits than automated tracing algorithms. The computation time of the new forward-fitting code amounts to a few minutes per active region.
Twinship, incest, and twincest in the Harry Potter universe

Directory of Open Access Journals (Sweden)

Vera Cuntz-Leng

2014-09-01

Full Text Available Among the large group of Harry Potter fans who write their own stories about the boy wizard, his friends, and his foes, and publish them on the Internet, some are interested in the exploration of the erotic and romantic bond between identical twins. Because the Harry Potter saga features two sets of identical twin pairs of different gender—the Weasley brothers and the Patil sisters—the series not only provides a unique playground for the recipients in terms of the possibilities for twincest stories; more importantly, it offers ample opportunity for researchers to examine how fans actually use such pairings. In this essay, the examination of twin relationships as portrayed within Rowling's works, the movies, and in twincest fan fiction are confronted with each other to outline how Rowling's different concepts of the sibling pairs and the author's general ongoing interest in doubling motifs is consistently expanded by fan fiction writers to discuss the complex relationship between source and fan text.
Region-selective electroless gold plating on polycarbonate sheets by UV-patterning in combination with silver activating

Energy Technology Data Exchange (ETDEWEB)

Zhou Qinghua [Institute of Microanalytical Systems, Department of Chemistry, Zhejiang University, Zijin' gang Campus, Hangzhou 310058 (China); Chen Hengwu, E-mail: hwchen@zju.edu.c [Institute of Microanalytical Systems, Department of Chemistry, Zhejiang University, Zijin' gang Campus, Hangzhou 310058 (China); Wang Yi [Institute of Microanalytical Systems, Department of Chemistry, Zhejiang University, Zijin' gang Campus, Hangzhou 310058 (China)

2010-02-28

A simple, time- and cost-effective approach for region-selective metalization of polycarbonate (PC) surface has been established by combining photoresist-free UV-patterning with tin- and amine-free silver activating and electroless gold plating. The surface of PC sheets was exposed to the UV lights emitted from a low-pressure mercury lamp through a photomask, the micro pattern on the mask being transferred to the PC surface due to the photochemical generation of carboxyl groups on the UV-exposed region. The UV-exposed PC sheets were then treated with an ammoniacal AgNO{sub 3} solution, so that the silver ions were chemisorbed by the photochemically generated carboxyl groups. When the Ag{sup +}-adsorbed PC sheet was immersed into an electroless gold plating bath, shiny gold film quickly deposited on the UV-exposed region, resulting in the formation of a micro gold devices on the PC surface. The whole plating process including UV-exposure, surface activating and gold plating can be completed in about 3-4 h. Attenuated total reflection Fourier transformation infrared spectrometer (ATR-FT-IR), X-ray photoelectron spectroscopy (XPS), atomic force microscope (AFM) and scanning electron microscope (SEM) were employed to trace the surface change during the plating process. Cyclic voltammetry (CV) and Scotch-tape test were employed to characterize the electrochemical properties and adhesion strength of the prepared micro gold devices, respectively. The prepared micro gold electrodes were demonstrated for amperometric detection of hydrogen peroxide.
Mean-field Ohm's law and coaxial helicity injection in force-free plasmas

International Nuclear Information System (INIS)

Weening, R. H.

2011-01-01

A theoretical analysis of steady-state coaxial helicity injection (CHI) in force-free plasmas is presented using a parallel mean-field Ohm's law that includes resistivity η and hyper-resistivity Λ terms. Using Boozer coordinates, a partial differential equation is derived for the time evolution of the mean-field poloidal magnetic flux, or magnetic Hamiltonian function, from the parallel mean-field Ohm's law. A general expression is obtained from the mean-field theory for the efficiency of CHI current drive in force-free plasmas. Inductances of internal energy, magnetic helicity, and poloidal magnetic flux are used to characterize axisymmetric plasma equilibria that have a model current profile. Using the model current profile, a method is suggested to determine the level of magnetohydrodynamic activity at the magnetic axis and the consequent deviation from the completely relaxed Taylor state. The mean-field Ohm's law model suggests that steady-state CHI can be viewed most simply as a boundary layer problem.
Tradução e adaptação transcultural do instrumento de avaliação do quadril "Harris Hip Score" Translation and cultural adaptation of the Harris Hip Score into portuguese

Directory of Open Access Journals (Sweden)

Rodrigo Pereira Guimarães

2010-01-01

Full Text Available OBJETIVO: O Harris Hip Score é instrumento de avaliação específica, desenvolvido originalmente para avaliar os resultados da artroplastia total de quadril. O objetivo deste estudo foi traduzir e adaptar culturalmente este instrumento para a língua portuguesa. MÉTODO: O método de tradução e adaptação cultural do Harris Hip Score envolveu quatro etapas: 1 - tradução inicial; 2 - retrotradução; 3 - apreciação das versões com elaboração da versão de consenso; 4 - pré-teste comentado com elaboração da versão final. RESULTADOS: A versão de consenso foi aplicada em 30 pacientes com afecção do quadril, sendo verificadas dificuldades no entendimento de algumas expressões, as quais foram substituídas por termos de mais fácil entendimento. Na reaplicação do questionário com a nova versão houve entendimento por 100% dos pacientes no que diz respeito ao sentido semântico, idiomático e contextual. CONCLUSÃO: A versão brasileira do Harris Hip Score permitiu a disponibilização de mais este instrumento para avaliação da qualidade de vida de pacientes com afecções do quadril. Há necessidade de um estudo de avaliação da confiabilidade e validade da versão adaptada culturalmente, a qual já está em desenvolvimento.OBJECTIVE: The Harris Hip Score is a specific evaluation tool, originally developed to assess the results of hip arthroplasty. The objective of this study was to translate and cross-culturally adapt the Harris Hip Score for the Portuguese language. METHOD: The method of translating and culturally adapting the Harris Hip Score involved four steps: 1 - initial translation, 2 - back-translation, 3 - evaluation of the pre-final versions with the development of a consensus version, 4 - commented pre-test with development of the final version. RESULTS: The consensus version was applied to thirty patients with hip disorders. Some difficulties were identified in understanding some expressions, which were replaced
A Modified Porous Titanium Sheet Prepared by Plasma-Activated Sintering for Biomedical Applications

Directory of Open Access Journals (Sweden)

Yukimichi Tamaki

2010-01-01

Full Text Available This study aimed to develop a contamination-free porous titanium scaffold by a plasma-activated sintering within an originally developed TiN-coated graphite mold. The surface of porous titanium sheet with or without a coated graphite mold was characterized. The cell adhesion property of porous titanium sheet was also evaluated in this study. The peak of TiC was detected on the titanium sheet processed with the graphite mold without a TiN coating. Since the titanium fiber elements were directly in contact with the carbon graphite mold during processing, surface contamination was unavoidable event in this condition. The TiC peak was not detectable on the titanium sheet processed within the TiN-coated carbon graphite mold. This modified plasma-activated sintering with the TiN-coated graphite mold would be useful to fabricate a contamination-free titanium sheet. The number of adherent cells on the modified titanium sheet was greater than that of the bare titanium plate. Stress fiber formation and the extension of the cells were observed on the titanium sheets. This modified titanium sheet is expected to be a new tissue engineering material in orthopedic bone repair.
Hydration free energies of cyanide and hydroxide ions from molecular dynamics simulations with accurate force fields

Science.gov (United States)

Lee, M.W.; Meuwly, M.

2013-01-01

The evaluation of hydration free energies is a sensitive test to assess force fields used in atomistic simulations. We showed recently that the vibrational relaxation times, 1D- and 2D-infrared spectroscopies for CN(-) in water can be quantitatively described from molecular dynamics (MD) simulations with multipolar force fields and slightly enlarged van der Waals radii for the C- and N-atoms. To validate such an approach, the present work investigates the solvation free energy of cyanide in water using MD simulations with accurate multipolar electrostatics. It is found that larger van der Waals radii are indeed necessary to obtain results close to the experimental values when a multipolar force field is used. For CN(-), the van der Waals ranges refined in our previous work yield hydration free energy between -72.0 and -77.2 kcal mol(-1), which is in excellent agreement with the experimental data. In addition to the cyanide ion, we also study the hydroxide ion to show that the method used here is readily applicable to similar systems. Hydration free energies are found to sensitively depend on the intermolecular interactions, while bonded interactions are less important, as expected. We also investigate in the present work the possibility of applying the multipolar force field in scoring trajectories generated using computationally inexpensive methods, which should be useful in broader parametrization studies with reduced computational resources, as scoring is much faster than the generation of the trajectories.
Free and Forced Vibrations of an Axially-Loaded Timoshenko Multi-Span Beam Carrying a Number of Various Concentrated Elements

Directory of Open Access Journals (Sweden)

Yusuf Yesilce

2012-01-01

Full Text Available In the existing reports regarding free and forced vibrations of the beams, most of them studied a uniform beam carrying various concentrated elements using Bernoulli-Euler Beam Theory (BET but without axial force. The purpose of this paper is to utilize the numerical assembly technique to determine the exact frequency-response amplitudes of the axially-loaded Timoshenko multi-span beam carrying a number of various concentrated elements (including point masses, rotary inertias, linear springs and rotational springs and subjected to a harmonic concentrated force and the exact natural frequencies and mode shapes of the beam for the free vibration analysis. The model allows analyzing the influence of the shear and axial force and harmonic concentrated force effects and intermediate concentrated elements on the dynamic behavior of the beams by using Timoshenko Beam Theory (TBT. At first, the coefficient matrices for the intermediate concentrated elements, an intermediate pinned support, applied harmonic force, left-end support and right-end support of Timoshenko beam are derived. After the derivation of the coefficient matrices, the numerical assembly technique is used to establish the overall coefficient matrix for the whole vibrating system. Finally, solving the equations associated with the last overall coefficient matrix one determines the exact dynamic response amplitudes of the forced vibrating system corresponding to each specified exciting frequency of the harmonic force. Equating the determinant of the overall coefficient matrix to zero one determines the natural frequencies of the free vibrating system (the case of zero harmonic force and substituting the corresponding values of integration constants into the related eigenfunctions one determines the associated mode shapes. The calculated vibration amplitudes of the forced vibrating systems and the natural frequencies of the free vibrating systems are given in tables for different values of
The electrostatics of charged insulating sheets peeled from grounded conductors

International Nuclear Information System (INIS)

Datta, M J; Horenstein, M N

2008-01-01

The physics of a charged, insulating sheet peeled from a ground-plane conductor is examined. Contact charging is ensured by charging a sheet to 10-12 kV with corona to establish intimate electrostatic contact with the underlying conductor. The surface potential is next forced to zero by sweeping the sheet with a stainless-steel brush, and the surface recharged to a new potential between 0 and 11 kV. The sheet is then peeled from the ground plane and its residual charge density is measured. Results show that the residual charge equals the breakdown-limiting value, but its polarity depends on the surface potential acquired just prior to peeling. The results have relevance to studies of industrial webs and insulating sheets.
Geometrical nonlinear free vibration of multi-layered graphene sheets

International Nuclear Information System (INIS)

Wang Jinbao; He Xiaoqiao; Kitipornchai, S; Zhang Hongwu

2011-01-01

A nonlinear continuum model is developed for the nonlinear vibration analysis of multi-layered graphene sheets (MLGSs), in which the nonlinear van der Waals (vdW) interaction between any two layers is formulated explicitly. The nonlinear equations of motion are studied by the harmonic-balance methods. Based on the present model, the nonlinear stiffened amplitude-frequency relations of double-layered graphene sheets (DLGSs) are investigated in the spectral neighbourhood of lower frequencies. The influence of the vdW interaction on the vibration properties of DLGSs is well illustrated by plotting the resulting modes' shapes, in which in-phase and anti-phase vibrations of DLGSs are studied. In particular, the large-amplitude vibration which associates with the anti-phase resonant frequencies, separating DLGS into single-layered GSs, is a promising application that needs to be explored further. In contrast, the vibration modes that are associated with the resonant frequencies are nonidentical and give various vibration patterns, which indicates that MLGSs are highly suited to being used as high-frequency resonators.
Comparison between the harris and ab expressions for the description of nuclear superdeformed rotational bands

International Nuclear Information System (INIS)

Hu Zuoxian; Zeng Jinyan

1998-01-01

The superdeformed rotational bands in the A ≅3D 190 region are systematically analyzed using the Harris two-parameter formula and the ab expression, respectively. Similar to the situations in normally deformed nuclei, there exist obvious and systematic deviation of Harris formula from the experiments. In contrast, the prediction of ab formula is very close to experiments, and can be conveniently used for the description of nuclear superdeformed bands
Galleons, Magic Potions, and Quidditch: The Mathematics of Harry Potter

Science.gov (United States)

Barta, Jim; L'Ai, Linda

2004-01-01

Literacy curriculum connections through books give advantage to teachers to use adventure to enhance mathematical learning among children. The way the children enhanced their mathematical competence by developing exciting mathematical activities and applications by using Harry Potter book episodes is discussed.
Simulated Nano scale Peeling Process of Monolayer Graphene Sheet: Effect of Edge Structure and Lifting Position

International Nuclear Information System (INIS)

Sasaki, N.; Okamoto, H.; Masuda, S.; Itamura, N.; Miura, K.

2010-01-01

The nanoscale peeling of the graphene sheet on the graphite surface is numerically studied by molecular mechanics simulation. For center-lifting case, the successive partial peelings of the graphene around the lifting center appear as discrete jumps in the force curve, which induce the arched deformation of the graphene sheet. For edge-lifting case, marked atomic-scale friction of the graphene sheet during the nanoscale peeling process is found. During the surface contact, the graphene sheet takes the atomic-scale sliding motion. The period of the peeling force curve during the surface contact decreases to the lattice period of the graphite. During the line contact, the graphene sheet also takes the stick-slip sliding motion. These findings indicate the possibility of not only the direct observation of the atomic-scale friction of the graphene sheet at the tip/surface interface but also the identification of the lattice orientation and the edge structure of the graphene sheet.
Asymptotic forms for the energy of force-free magnetic field ion figurations of translational symmetry

Science.gov (United States)

Sturrock, P. A.; Antiochos, S. K.; Klinchuk, J. A.; Roumeliotis, G.

1994-01-01

It is known from computer calculations that if a force-free magnetic field configuration is stressed progressively by footpoint displacements, the configuration expands and approaches the open configuration with the same surface flux distribution and the energy of the field increases progressively. For configurations of translationalsymmetry, it has been found empirically that the energy tends asymptotically to a certain functional form. It is here shown that analysis of a simple model of the asymptotic form of force-free fields of translational symmetry leads to and therefore justifies this functional form. According to this model, the field evolves in a well-behaved manner with no indication of instability or loss of equilibrium.
Symmetry breaking bifurcations of a current sheet

International Nuclear Information System (INIS)

Parker, R.D.; Dewar, R.L.; Johnson, J.L.

1990-01-01

Using a time evolution code with periodic boundary conditions, the viscoresistive hydromagnetic equations describing an initially static, planar current sheet with large Lundquist number have been evolved for times long enough to reach a steady state. A cosh 2 x resistivity model was used. For long periodicity lengths L p , the resistivity gradient drives flows that cause forced reconnection at X point current sheets. Using L p as a bifurcation parameter, two new symmetry breaking bifurcations were found: a transition to an asymmetric island chain with nonzero, positive, or negative phase velocity, and a transition to a static state with alternating large and small islands. These states are reached after a complex transient behavior, which involves a competition between secondary current sheet instability and coalescence
Harry Potter book series - trivial or not?

Directory of Open Access Journals (Sweden)

Brigita Pavšič

2006-12-01

Full Text Available The article explores the extcnt to which the features of trivial literature appear in the Harry Potter series by J. K. Rowling.This is done in comparison with another popular children's series, The Famous Five by Enid Blyton, which was analysed by Igor Saksida. The main focus of the analysis is on the schematic representation of plot, characters and the exotic nature of the setting and time of the stories.

Distributions of the ion temperature, ion pressure, and electron density over the current sheet surface

International Nuclear Information System (INIS)

Kyrie, N. P.; Markov, V. S.; Frank, A. G.; Vasilkov, D. G.; Voronova, E. V.

2016-01-01

The distributions of the ion temperature, ion pressure, and electron density over the width (the major transverse dimension) of the current sheet have been studied for the first time. The current sheets were formed in discharges in argon and helium in 2D and 3D magnetic configurations. It is found that the temperature of argon ions in both 2D and 3D magnetic configurations is almost uniform over the sheet width and that argon ions are accelerated by the Ampère force. In contrast, the distributions of the electron density and the temperature of helium ions are found to be substantially nonuniform. As a result, in the 2D magnetic configuration, the ion pressure gradient across the sheet width makes a significant contribution (comparable with the Ampère force) to the acceleration of helium ions, whereas in the 3D magnetic configuration, the Ampère force is counterbalanced by the pressure gradient.
Distributions of the ion temperature, ion pressure, and electron density over the current sheet surface

Energy Technology Data Exchange (ETDEWEB)

Kyrie, N. P., E-mail: kyrie@fpl.gpi.ru; Markov, V. S., E-mail: natalya.kyrie@yandex.ru; Frank, A. G.; Vasilkov, D. G.; Voronova, E. V. [Russian Academy of Sciences, Prokhorov General Physics Institute (Russian Federation)

2016-06-15

The distributions of the ion temperature, ion pressure, and electron density over the width (the major transverse dimension) of the current sheet have been studied for the first time. The current sheets were formed in discharges in argon and helium in 2D and 3D magnetic configurations. It is found that the temperature of argon ions in both 2D and 3D magnetic configurations is almost uniform over the sheet width and that argon ions are accelerated by the Ampère force. In contrast, the distributions of the electron density and the temperature of helium ions are found to be substantially nonuniform. As a result, in the 2D magnetic configuration, the ion pressure gradient across the sheet width makes a significant contribution (comparable with the Ampère force) to the acceleration of helium ions, whereas in the 3D magnetic configuration, the Ampère force is counterbalanced by the pressure gradient.
Film sheet cassette

International Nuclear Information System (INIS)

1981-01-01

A novel film sheet cassette is described for handling CAT photographic films under daylight conditions and facilitating their imaging. A detailed description of the design and operation of the cassette is given together with appropriate illustrations. The resulting cassette is a low-cost unit which is easily constructed and yet provides a sure light-tight seal for the interior contents of the cassette. The individual resilient fingers on the light-trap permit the ready removal of the slide plate for taking pictures. The stippled, non-electrostatic surface of the pressure plate ensures an air layer and free slidability of the film for removal and withdrawal of the film sheet. The advantage of the daylight system is that a darkroom need not be used for inserting and removing the film in and out of the cassette resulting in a considerable time saving. (U.K.)
Numerical simulations of the spread of floating passive tracer released at the Old Harry prospect

International Nuclear Information System (INIS)

Bourgault, Daniel; Cyr, Frédéric; Dumont, Dany; Carter, Angela

2014-01-01

The Gulf of St Lawrence is under immediate pressure for oil and gas exploration, particularly at the Old Harry prospect. A synthesis of the regulatory process that has taken place over the last few years indicates that important societal decisions soon to be made by various ministries and environmental groups are going to be based on numerous disagreements between the private sector and government agencies. The review also shows that the regulatory process has taken place with a complete lack of independent oceanographic research. Yet, the Gulf of St Lawrence is a complex environment that has never been specifically studied for oil and gas exploitation. Motivated by this knowledge gap, preliminary numerical experiments are carried out where the spreading of a passive floating tracer released at Old Harry is examined. Results indicate that the tracer released at Old Harry may follow preferentially two main paths. The first path is northward along the French Shore of Newfoundland, and the second path is along the main axis of the Laurentian Channel. The most probable coastlines to be touched by water flowing through Old Harry are Cape Breton and the southern portion of the French Shore, especially Cape Anguille and the Port au Port Peninsula. The Magdalen Islands are less susceptible to being affected than those regions but the probability is not negligible. These preliminary results provide guidance for future more in-depth and complete multidisciplinary studies from which informed decision-making scenarios could eventually be made regarding the exploration and development of oil and gas at the Old Harry prospect in particular and, more generally, in the Gulf of St Lawrence
Numerical simulations of the spread of floating passive tracer released at the Old Harry prospect

Science.gov (United States)

Bourgault, Daniel; Cyr, Frédéric; Dumont, Dany; Carter, Angela

2014-05-01

The Gulf of St Lawrence is under immediate pressure for oil and gas exploration, particularly at the Old Harry prospect. A synthesis of the regulatory process that has taken place over the last few years indicates that important societal decisions soon to be made by various ministries and environmental groups are going to be based on numerous disagreements between the private sector and government agencies. The review also shows that the regulatory process has taken place with a complete lack of independent oceanographic research. Yet, the Gulf of St Lawrence is a complex environment that has never been specifically studied for oil and gas exploitation. Motivated by this knowledge gap, preliminary numerical experiments are carried out where the spreading of a passive floating tracer released at Old Harry is examined. Results indicate that the tracer released at Old Harry may follow preferentially two main paths. The first path is northward along the French Shore of Newfoundland, and the second path is along the main axis of the Laurentian Channel. The most probable coastlines to be touched by water flowing through Old Harry are Cape Breton and the southern portion of the French Shore, especially Cape Anguille and the Port au Port Peninsula. The Magdalen Islands are less susceptible to being affected than those regions but the probability is not negligible. These preliminary results provide guidance for future more in-depth and complete multidisciplinary studies from which informed decision-making scenarios could eventually be made regarding the exploration and development of oil and gas at the Old Harry prospect in particular and, more generally, in the Gulf of St Lawrence.
Wands or Quills? Lessons in Pedagogy from Harry Potter

Science.gov (United States)

Johnson, Melissa C.

2015-01-01

This essay is grounded in the scholarship of teaching and learning and will focus specifically on the ways in which the Harry Potter books highlight the diversity of learning and teaching styles; privilege active experiential learning and problem solving over passive rote learning; and emphasize the benefits of collaboration over competition.…
Harry Smith — recipient of the 2008 Molecular Ecology Prize

Science.gov (United States)

Harry Smith is a scholar, mentor, internationally renowned researcher, eloquent speaker and author, pioneering journal editor and highly valued colleague who has contributed greatly in multiple ways to plant science and the community. He richly deserves the honour of the Molecular Ecology Prize....
A simple holistic hypothesis for the self-destruction of ice sheets

Science.gov (United States)

Hughes, T.

2011-07-01

Ice sheets are the only components of Earth's climate system that can self-destruct. This paper presents the quantitative force balance for bottom-up modeling of ice sheets, as first presented qualitatively in this journal as a way to quantify ice-bed uncoupling leading to self-destruction of ice sheets ( Hughes, 2009a). Rapid changes in sea level and climate can result if a large ice-sheet self-destructs quickly, as did the former Laurentide Ice Sheet of North America between 8100 and 7900 BP, thereby terminating the last cycle of Quaternary glaciation. Ice streams discharge up to 90 percent of ice from past and present ice sheets. A hypothesis is presented in which self-destruction of an ice sheet begins when ubiquitous ice-bed decoupling, quantified as a floating fraction of ice, proceeds along ice streams. This causes ice streams to surge and reduce thickness by some 90 percent, and height above sea level by up to 99 percent for floating ice, so the ice sheet undergoes gravitational collapse. Ice collapsing over marine embayments becomes floating ice shelves that may then disintegrate rapidly. This floods the world ocean with icebergs that reduce the ocean-to-atmosphere heat exchange, thereby triggering climate change. Calving bays migrate up low stagnating ice streams and carve out the accumulation zone of the collapsed ice sheet, which prevents its recovery, decreases Earth's albedo, and terminates the glaciation cycle. This sequence of events may coincide with a proposed life cycle of ice streams that drain the ice sheet. A first-order treatment of these life cycles is presented that depends on the longitudinal force balance along the flowbands of ice streams and gives a first approximation to ice-bed uncoupling at snapshots during gravitational collapse into ice shelves that disintegrate, thereby removing the ice sheet. The stability of the Antarctic Ice Sheet is assessed using this bottom-up approach.
Computer controlled experimental device for investigations of tribological influences in sheet metal forming

Directory of Open Access Journals (Sweden)

Milan Djordjevic

2012-05-01

Full Text Available Sheet metal forming, especially deep drawing process, is influenced by many factors. Blank holding force and drawbead displacement are two of them that can be controlled during the forming process. For this purpose, electro-hydraulic computerized sheet-metal strip sliding device has been constructed. Basic characteristic of this device is realization of variable contact pressure and drawbead height as functions of time or stripe displacement. There are both, pressure and drawbead, ten linear and nonlinear functions. Additional features consist of the ability to measure drawing force, contact pressure, drawbead displacement etc. Presented in the paper are the device overview and the first results of steel sheet stripe sliding over rounded drawbead.
COMPUTER CONTROLLED EXPERIMENTAL DEVICE FOR INVESTIGATIONS OF TRIBOLOGICAL INFLUENCES IN SHEET METAL FORMING

Directory of Open Access Journals (Sweden)

Tomislav Vujinović

2012-05-01

Full Text Available Sheet metal forming, especially deep drawing process is influenced by many factors. Blank holding force and drawbead displacement are two of them that can be controlled during the forming process.For this purpose, an electro-hydraulic computerized sheet-metal strip sliding device has been constructed. The basic characteristic of this device is realization of variable contact pressure and drawbead height as functions of time or stripe displacement. There are both, pressure and drawbead, ten linear and nonlinear functions. Additional features consist of the ability to measure drawing force, contact pressure, drawbead displacement etc.The device overview and first results of steel sheet stripe sliding over rounded drawbead are presented in the paper.
Harry Potter Versus Muggles: Literary Criticism and Legal Challenge

Science.gov (United States)

Carney, John; DeMitchell, Todd

2005-01-01

J. K. Rowling's series about the young, orphaned Harry Potter who escapes his often hostile, nonmagical Muggle (or human) existence for a world of ghosts, spells, and potions, magical objects, and exotic creatures to be found at the Hogwarts School of Witchcraft and Wizardry has captivated a worldwide audience. Since the publication in England of…
Education of the Young Harry Potter: Socialization and Schooling for Wizards.

Science.gov (United States)

Black, Mary S.; Eisenwine, Marilyn J.

2001-01-01

Examines the "Harry Potter" books for the messages they convey about schools, teachers, and education. Asserts that the present positive images of schooling as well as moral dilemmas and their resolution. (Contains 23 references.) (SK)
Interaction of ice sheets and climate during the past 800 000 years

NARCIS (Netherlands)

Stap, L. B.; Van De Wal, R. S W; De Boer, B.; Bintanja, R.; Lourens, L. J.

2014-01-01

During the Cenozoic, land ice and climate interacted on many different timescales. On long timescales, the effect of land ice on global climate and sea level is mainly set by large ice sheets in North America, Eurasia, Greenland and Antarctica. The climatic forcing of these ice sheets is largely
The peeling behaviour of a graphene sheet on a nano-scale corrugated surface

International Nuclear Information System (INIS)

Chen, Hao; Chen, Shaohua

2013-01-01

The peeling process and average peeling force of a graphene (GE) sheet on a corrugated surface are investigated using molecular dynamics simulation. It is found that the peeling behaviour varies with the substrate surface roughness and the peeling angle. Three kinds of typically peeling behaviours include (a) GE sheet directly passing the valley of the substrate roughness; (b) bouncing off from the substrate; and (c) continuously peeling off similarly to that on a flat substrate. As a result, the average peeling force is strongly dependent of the peeling behaviours. Furthermore, some interesting phenomena are caught, such as partial detaching and partial sliding of GE sheet in the valley of the substrate roughness, which are mainly due to the effects of pre-tension in GE sheet and the reduction of friction resistance. The results in this paper should be useful for the design of nano-film/substrate systems. (paper)
Modeling the Alzheimer Abeta17-42 fibril architecture: tight intermolecular sheet-sheet association and intramolecular hydrated cavities.

Science.gov (United States)

Zheng, Jie; Jang, Hyunbum; Ma, Buyong; Tsai, Chung-Jun; Nussinov, Ruth

2007-11-01

We investigate Abeta(17-42) protofibril structures in solution using molecular dynamics simulations. Recently, NMR and computations modeled the Abeta protofibril as a longitudinal stack of U-shaped molecules, creating an in-parallel beta-sheet and loop spine. Here we study the molecular architecture of the fibril formed by spine-spine association. We model in-register intermolecular beta-sheet-beta-sheet associations and study the consequences of Alzheimer's mutations (E22G, E22Q, E22K, and M35A) on the organization. We assess the structural stability and association force of Abeta oligomers with different sheet-sheet interfaces. Double-layered oligomers associating through the C-terminal-C-terminal interface are energetically more favorable than those with the N-terminal-N-terminal interface, although both interfaces exhibit high structural stability. The C-terminal-C-terminal interface is essentially stabilized by hydrophobic and van der Waals (shape complementarity via M35-M35 contacts) intermolecular interactions, whereas the N-terminal-N-terminal interface is stabilized by hydrophobic and electrostatic interactions. Hence, shape complementarity, or the "steric zipper" motif plays an important role in amyloid formation. On the other hand, the intramolecular Abeta beta-strand-loop-beta-strand U-shaped motif creates a hydrophobic cavity with a diameter of 6-7 A, allowing water molecules and ions to conduct through. The hydrated hydrophobic cavities may allow optimization of the sheet association and constitute a typical feature of fibrils, in addition to the tight sheet-sheet association. Thus, we propose that Abeta fiber architecture consists of alternating layers of tight packing and hydrated cavities running along the fibrillar axis, which might be possibly detected by high-resolution imaging.
Symmetry breaking bifurcations of a current sheet

International Nuclear Information System (INIS)

Parker, R.D.; Dewar, R.L.; Johnson, J.L.

1988-08-01

Using a time evolution code with periodic boundary conditions, the viscoresistive hydromagnetic equations describing an initially static, planar current sheet with large Lundquist number have been evolved for times long enough to reach a steady state. A cosh 2 x resistivity model was used. For long periodicity lengths, L p , the resistivity gradient drives flows which cause forced reconnection at X point current sheets. Using L p as a bifurcation parameter, two new symmetry breaking bifurcations were found - a transition to an asymmetric island chain with nonzero, positive or negative phase velocity, and a transition to a static state with alternating large and small islands. These states are reached after a complex transient behavior which involves a competition between secondary current sheet instability and coalescence. 31 refs., 6 figs
Effect of uncertainty parameters on graphene sheets Young's modulus prediction

International Nuclear Information System (INIS)

Sahlaoui, Habib; Sidhom Habib; Guedri, Mohamed

2013-01-01

Software based on molecular structural mechanics approach (MSMA) and using finite element method (FEM) has been developed to predict the Young's modulus of graphene sheets. Obtained results have been compared to results available in the literature and good agreement has been shown when the same values of uncertainty parameters are used. A sensibility of the models to their uncertainty parameters has been investigated using a stochastic finite element method (SFEM). The different values of the used uncertainty parameters, such as molecular mechanics force field constants k_r and k_θ, thickness (t) of a graphene sheet and length ( L_B) of a carbon carbon bonds, have been collected from the literature. Strong sensibilities of 91% to the thickness and of 21% to the stretching force (k_r) have been shown. The results justify the great difference between Young's modulus predicted values of the graphene sheets and their large disagreement with experimental results.
A 'backward' free-convective boundary layer

NARCIS (Netherlands)

Kuiken, H.K.

1981-01-01

In this paper the cooling of a low-heat-resistance sheet that moves downwards is considered. The free-convective velocities are assumed to be much larger than the velocity of the sheet. As a result the motion of the fluid is mainly towards the point where the sheet enters the system and a ‘backward’
Free and forced vibrations of an eccentrically rotating string on a viscoelastic foundation

Science.gov (United States)

Soedel, S. M.; Soedel, W.

1989-12-01

Equations of motion of an eccentrically rotating cord on a viscoelastic foundation, derived by way of Hamilton's principle, are solved for free and forced vibrations. The natural frequencies during rotation are bifurcations of the stationary string values. The natural modes are complex and can be interpreted as mode pairs spinning with and against the string rotation. The general forced solution is expanded in terms of these complex modes. Results are given for an example of steady state harmonic response because of its practical significance to aircraft or automobile tire design.
Muusikale meeldib olla kõikjal / Louis Andriessen ; interv. Harry Liivrand

Index Scriptorium Estoniae

Andriessen, Louis

2000-01-01

Hollandi heliloojast Louis Andriessenist ja tema loomingust. 19. ja 20. sajandi ooperi erinevusest. Ka 1999. a. Amsterdamis esietendunud Louis Andriesseni ja Peter Greenaway ooperist "Writing to Vermeer", mis on pühendatud Jan Vermeer van Delfti ühele elulõigule 1672. a. Kommenteerinud Harry Liivrand, Olari Elts

Ice flow Modelling of the Greenland Ice Sheet

DEFF Research Database (Denmark)

Nielsen, Lisbeth Tangaa

Models of ice flow have a range of application in glaciology, including investigating the large-scale response of ice sheets to changes in climate, assimilating data to estimate unknown conditions beneath the ice sheet, and in interpreting proxy records obtained from ice cores, among others. In t...... a steady state with respect to the reference climate at the end of the simulation and that the mass balance of the ice sheet at this time was more sensitive to recent climate fluctuations than the temperature forcing in the early or mid-Holocene.......Models of ice flow have a range of application in glaciology, including investigating the large-scale response of ice sheets to changes in climate, assimilating data to estimate unknown conditions beneath the ice sheet, and in interpreting proxy records obtained from ice cores, among others....... In this PhD project, the use of ice flow models for the interpretation of the age-structure of the Greenland ice sheet, i.e. the depth within the ice, at which ice deposited at given times are found at present day. Two different observational data sets of this archive were investigated. Further, paleo...
Effects of lorentz force on flow fields of free burning arc and wall stabilized non-transferred arc

International Nuclear Information System (INIS)

Peng Yi; Huang Heji; Pan Wenxia

2013-01-01

The flow fields of two typical DC plasma arcs, namely the transferred free burning arc and the non-transferred arc were simulated by solving hydrodynamic equations and electromagnetic equations. The effects of the Lorentz force on the characteristics of the flow fields of these two typical DC plasma arcs were estimated. Results show that in the case of the free burning arc, the Lorentz force due to the current self-induced magnetic field has significant impact on the flow fields, as the self-induced magnetic compression is the main arc constraint mechanism. However, in the case of the non-transferred arc generated in a torch with long and narrow inter-electrode inserts and an abruptly expanded anode, the Lorentz force has limited impact on the flow fields of the plasma especially at the downstream of the inter-electrode inserts, compared with the strong wall constraints and relatively high aerodynamic force. This is because the ratio of the electromagnetic force to the aerodynamic force is only about 0.01 in this region. When the main consideration is outlet parameters of the wall stabilized non-transferred DC arc plasma generator, in order to improve the efficiency of the numerical simulation program, the Lorentz force could be neglected in the non-transferred arc in some cases. (authors)
Response to perturbations of the force-free aligned pulsar atmosphere

International Nuclear Information System (INIS)

Jackson, E.A.

1978-01-01

To clarify the likely structure of the pulsar atmosphere, the response of various plasma configurations near a rotating neutron star with aligned rotational and dipole magnetic axes is investigated. These configurations represent both general infinitesimal perturbations along B of the force-free (E.B = O) atmosphere, as well as a heuristic class of finite perturbations (shell atmospheres). It is shown that the general infinitesimal perturbations along B which preserve spatial ordering involve regions of both negative and positive work, whose boundaries are at the surfaces E.B = O(E is not equal to O) and those of zero charge density (cos 2 theta = 1/3). At the latter surfaces, and on one side of the system will produce mixing of charges of opposite sign. The intersecting E.B=O surface, the response of the recombination of these charges, and their removal by gravity, shows that the force-free atmosphere is physically unstable, favouring a lower density at mid-latitude. The response of various plasma shell atmospheres is also examined and confirms the likelihood of the plasma atmosphere previously predicted from a near-vacuum analysis, provided the density is not too large. Larger density shells are found to break up into 'striated' configurations, containing two electron and one or two ion groups, which however may not develop into stable configurations. Criteria on the plasma density related to this and other responses of the plasma shells are discussed. (author)
Self-closing sheet for encapsulating and dumping a bulk of material

DEFF Research Database (Denmark)

2017-01-01

The invention relates to a sheet (1) to be placed in relation to a split barge (100) for encapsulating a bulk of material (101) to be dumped when the bulk of material is released, the sheet comprising a material containing portion (4) and at least one material free portion (3) extending from...
Buckling Behavior of Substrate Supported Graphene Sheets

Directory of Open Access Journals (Sweden)

Kuijian Yang

2016-01-01

Full Text Available The buckling of graphene sheets on substrates can significantly degrade their performance in materials and devices. Therefore, a systematic investigation on the buckling behavior of monolayer graphene sheet/substrate systems is carried out in this paper by both molecular mechanics simulations and theoretical analysis. From 70 simulation cases of simple-supported graphene sheets with different sizes under uniaxial compression, two different buckling modes are investigated and revealed to be dominated by the graphene size. Especially, for graphene sheets with length larger than 3 nm and width larger than 1.1 nm, the buckling mode depends only on the length/width ratio. Besides, it is revealed that the existence of graphene substrate can increase the critical buckling stress and strain to 4.39 N/m and 1.58%, respectively, which are about 10 times those for free-standing graphene sheets. Moreover, for graphene sheets with common size (longer than 20 nm, both theoretical and simulation results show that the critical buckling stress and strain are dominated only by the adhesive interactions with substrate and independent of the graphene size. Results in this work provide valuable insight and guidelines for the design and application of graphene-derived materials and nano-electromechanical systems.
A more in-depth interpretation of MMPI-2 in MS patients by using Harris and Lingoes subscales.

Science.gov (United States)

Incerti, Chiara C; Argento, Ornella; Pisani, Valerio; Magistrale, Giuseppe; Sabatello, Ugo; Caltagirone, Carlo; Nocentini, Ugo

2017-01-01

Multiple Sclerosis (MS) is frequently associated with neuropsychiatric abnormalities. The aim of our study was to discriminate between psychosomatic disturbances and MS physically-related symptoms using the Harris-Lingoes subscales of the Minnesota Multiphasic Personality Inventory-2 (MMPI-2). Forty-six MS out-patients (35 females; mean age = 44.5); and 82 healthy volunteers (62 females; mean age = 46.5) were evaluated with MMPI-2 questionnaire. The frequency distribution of MMPI-2 clinical scales with high scores (> = 65) and the related Harris-Lingoes subscales were analyzed for both MS patients and healthy control subjects. Data analysis showed elevated scores in 47.8% of the patients mainly on MMPI-2 clinical scales 1, 2, and 3. The Harris-Lingoes subscales analysis allowed us to isolate and identify physical symptoms contributing to elevation of MMPI-2 clinical scales, reduce the occurrence of false positives (MMPI-2 clinical scales elevations mainly due to MS physical disability) and provide a more detailed description of psycho-emotional symptoms of MS patients. In conclusion, our study shows the utility of Harris-Lingoes subscales analysis when MMPI-2 is used for psychological assessment of MS patients.
Harry Potter ja Scarlett käivad kohut / Ilona Martson

Index Scriptorium Estoniae

Martson, Ilona, 1970-

2001-01-01

Alice Randalli romaan "Tuul on läinud" - samad sündmused kui Margaret Mitchelli romaanis "Tuulest viidud", ainult neegerorjade vaatevinklist. Nancy Stofferi raamatud "Larry Potter ja tema parim sõber Lilly" ja "Legend Rah'ist ja Mugudest" ilmusid 1984. a. Joanne Kathleen Rowlingi "Harry Potter" lood aga valmisid hiljem
Foucault at School: Discipline, Education and Agency in "Harry Potter"

Science.gov (United States)

Wolosky, Shira

2014-01-01

The formative power of children's literature is both great and suspicious. As a resource of socialization, the construction and experience of children's literature can be seen as modes of disciplinary coercion such as Michel Foucault has anatomized. "Harry Potter", as a "craze" phenomenon, has attracted particular…
Potential of the solid-Earth response for limiting long-term West Antarctic Ice Sheet retreat

Science.gov (United States)

Konrad, Hannes; Sasgen, Ingo; Pollard, David; Klemann, Volker

2016-04-01

The West Antarctic Ice Sheet (WAIS) is assumed to be inherently unstable because it is grounded below sea level in a large part, where the bedrock deepens from today's grounding line towards the interior of the ice sheet. Idealized simulations have shown that bedrock uplift due to isostatic adjustment of the solid Earth and the associated sea-level fall may stop the retreat of such a marine-based ice sheet (Gomez et al., 2012). Here, we employ a coupled model for ice-sheet dynamics and solid-Earth dynamics, including a gravitationally consistent description of sea level, to investigate the influence of the viscoelastic Earth structure on the WAIS' future stability (Konrad et al. 2015). For this, we start from a steady-state condition for the Antarctic Ice Sheet close to present-day observations and apply atmospheric and oceanic forcing of different strength to initiate the retreat of the WAIS and investigate the effect of the viscoelastic deformation on the ice evolution for a range of solid-Earth rheologies. We find that the climate forcing is the primary control on the occurrence of the WAIS collapse. However, for moderate climate forcing and a weak solid-Earth rheology associated with the West Antarctic rift system (asthenosphere viscosities of 3x10^19 Pa s or less), we find that the combined effect of bedrock uplift and gravitational sea-level fall limits the retreat to the Amundsen Sea embayment on millennial time scales. In contrast, a stiffer Earth rheology yields a collapse under these conditions. Under a stronger climate forcing, weak Earth structures do not prevent the WAIS collapse; however, they produce a delay of up to 5000 years in comparison to a stiffer solid-Earth rheology. In an additional experiment, we test the impact of sea-level rise from an assumed fast deglaciation of the Greenland Ice Sheet. In cases when the climatic forcing is too weak to force WAIS collapse by itself, the additional rise in sea-level leads to disintegration of the WAIS
Op het grensvlak van chemie en biotechnologie (interview met Harry Bitter)

NARCIS (Netherlands)

Gool, van J.; Bitter, J.H.

2015-01-01

Harry Bitter, sinds twee jaar hoogleraar Biobased Chemistry & Technology aan de Wageningen Universiteit, pleit voor meer chemie en katalyse in het onderzoek naar biobased producten. ‘Mijn onderzoeksfocus ligt op hoe je de omzettingen van biomassa naar product zo optimaal mogelijk kunt uitvoeren.
A free vibration of beams carrying a concentrated mass under distributed axial forces

International Nuclear Information System (INIS)

Nagai, Ken-ichi; Nagaya, Kosuke; Takeda, Sadahiko; Arai, Noriyuki.

1988-01-01

The free bending vibrations of beams with a concentrated mass subjected to axial forces caused by axial acceleration are analyzed by the Galerkin method, introducing the mode shape functions which are the sum of the products of the finite power series and the trigonometrical function. This analytical method makes it easy to construct the equations of motion in each boundary condition only by exchanging the coefficients of the finite power series. Numerical calculations are carried out under four sets of boundary conditions combined with simply supported and clamped edges. The natural frequencies and the corresponding modes of vibration are determined under both various locations of the concentrated mass and axial forces. it is found that the transverse inertia force and the axial force, due to the concentrated mass, have significant effects on the change of the natural frequencies for beams. Furthermore the distinction of boundary conditions gives predominant influence to the variation of natural frequencies. (author)
Current sheets and pressure anisotropy in the reconnection exhaust

International Nuclear Information System (INIS)

Le, A.; Karimabadi, H.; Roytershteyn, V.; Egedal, J.; Ng, J.; Scudder, J.; Daughton, W.; Liu, Y.-H.

2014-01-01

A particle-in-cell simulation shows that the exhaust during anti-parallel reconnection in the collisionless regime contains a current sheet extending 100 inertial lengths from the X line. The current sheet is supported by electron pressure anisotropy near the X line and ion anisotropy farther downstream. Field-aligned electron currents flowing outside the magnetic separatrices feed the exhaust current sheet and generate the out-of-plane, or Hall, magnetic field. Existing models based on different mechanisms for each particle species provide good estimates for the levels of pressure anisotropy. The ion anisotropy, which is strong enough to reach the firehose instability threshold, is also important for overall force balance. It reduces the outflow speed of the plasma
Current sheets and pressure anisotropy in the reconnection exhaust

Energy Technology Data Exchange (ETDEWEB)

Le, A.; Karimabadi, H.; Roytershteyn, V. [SciberQuest, Inc., Del Mar, California 92014 (United States); Egedal, J. [University of Wisconsin–Madison, Madison, Wisconsin 53706 (United States); Ng, J. [PPPL, Princeton University, Princeton, New Jersey 08543 (United States); Scudder, J. [University of Iowa, Iowa City, Iowa 52242 (United States); Daughton, W.; Liu, Y.-H. [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)

2014-01-15

A particle-in-cell simulation shows that the exhaust during anti-parallel reconnection in the collisionless regime contains a current sheet extending 100 inertial lengths from the X line. The current sheet is supported by electron pressure anisotropy near the X line and ion anisotropy farther downstream. Field-aligned electron currents flowing outside the magnetic separatrices feed the exhaust current sheet and generate the out-of-plane, or Hall, magnetic field. Existing models based on different mechanisms for each particle species provide good estimates for the levels of pressure anisotropy. The ion anisotropy, which is strong enough to reach the firehose instability threshold, is also important for overall force balance. It reduces the outflow speed of the plasma.
Another Look at a Bahamian Mystery: The Murder of Sir Harry Oakes

Directory of Open Access Journals (Sweden)

LeGrand, Cathy

2010-01-01

Full Text Available Stop me if you've heard this one:The richest man in the Bahamas, no, the richest man in the British empire, is murdered in his bed. He has suffered a fatal head wound caused by a boat's winch lever. Or by bullets from a small-caliber gun. No, by a conch shell. Or by some blunt object close at hand, still unidentified.The rich man's body is set afire in order to burn down his house and conceal the details of the crime. Or as a diversionary tactic, to confuse the authorities. No, in a voodoo ritual.The killer is his son-in-law. Or his houseguest. Or a mafia hitman.The reason for the murder: to eliminate a powerful opponent of casino gambling. Or to prevent this rich man from leaving the Bahamas with his businesses and wealth. Or to avenge the rich man's resentment of his daughter's choice of husband. Or to steal the enormous horde of gold reported to be hidden in his house.The richest man in the Bahamas (if not the whole Empire was Sir Harry Oakes, who earned his fortune from gold prospecting and spent the rest of his life avoiding the tax man. He was found murdered in the morning of 8 July 1943, having been killed sometime after midnight during a summer thunderstorm. His body, bearing four lethal head wounds and burns from the fire, was discovered the next morning by his close friend and houseguest, Harold Christie, an influential Bahamian estate agent.Add to this cast of characters a smooth-operating Mauritian (Alfred de Marigny married to Oakes' young daughter; a former King of England (the Duke of Windsor, now forced to serve this tiny colonial outpost; and the Duke's scandalous wife (the Duchess of Windsor, for whom he renounced his crown.Also, factor in the war raging around the globe. France had recently fallen to the Nazis; German U-boats patrolled the Atlantic; and the shortages and other exigencies of wartime were the rule. The trial of Alfred deMarigny, Oakes' son-in-law, made international news and his eventual acquittal left the case
Scanning Kelvin probe force microscopy as a means of predicting the electrochemical characteristics of the surface of a modified AA4xxx/AA3xxx (Al alloys) brazing sheet

International Nuclear Information System (INIS)

Afshar, F. Norouzi; Wit, J.H.W. de; Terryn, H.; Mol, J.M.C.

2013-01-01

Highlights: ► Macro- and micro-electrochemical surface properties of an aluminium brazing sheet were investigated. ► Electrochemical surface properties before and after brazing were studied and compared. ► Scanning Kelvin probe force microscopy and potentiodynamic polarization measurements were performed. ► The electrochemical responses were correlated to the pre- and post-brazing treatment microstructure. -- Abstract: Macro- and micro-electrochemical properties of clad and core surfaces of a modified AA4xxx/AA3xxx brazing sheet material, before and after brazing, have been evaluated and compared. By scanning Kelvin probe force microscopy (SKPFM), the Volta potential distribution over the brazed and non-brazed clad surfaces was measured. The changes in the Volta potential maps were correlated to the macro-electrochemical responses of the surfaces and the microstructural features that evolve as a result of brazing. By performing potentiodynamic polarization experiments and microscopic analysis of the corroded surfaces and cross sections, the suitability of SKPFM analysis for corrosion performance prediction of the aluminium brazing sheet material in a sea water acidified accelerated test (SWAAT) environment was confirmed. Considering the purity of Si phase in the structures of both brazed and non-brazed material, it is suggested that Si can be applied as a reliable local reference in both structures to compare the changes in Volta potential differences as the result of different heat treatments of aluminium brazing sheet. Increasing the copper content of the re-solidified clad material as a result of brazing treatment was found to increase the Volta potential of the matrix which in turn reduces the cathodic protection power of the re-solidified clad material towards the core material
Free oscillations in a climate model with ice-sheet dynamics

Science.gov (United States)

Kallen, E.; Crafoord, C.; Ghil, M.

1979-01-01

A study of stable periodic solutions to a simple nonlinear model of the ocean-atmosphere-ice system is presented. The model has two dependent variables: ocean-atmosphere temperature and latitudinal extent of the ice cover. No explicit dependence on latitude is considered in the model. Hence all variables depend only on time and the model consists of a coupled set of nonlinear ordinary differential equations. The globally averaged ocean-atmosphere temperature in the model is governed by the radiation balance. The reflectivity to incoming solar radiation, i.e., the planetary albedo, includes separate contributions from sea ice and from continental ice sheets. The major physical mechanisms active in the model are (1) albedo-temperature feedback, (2) continental ice-sheet dynamics and (3) precipitation-rate variations. The model has three-equilibrium solutions, two of which are linearly unstable, while one is linearly stable. For some choices of parameters, the stability picture changes and sustained, finite-amplitude oscillations obtain around the previously stable equilibrium solution. The physical interpretation of these oscillations points to the possibility of internal mechanisms playing a role in glaciation cycles.
Local charge transport properties of hydrazine reduced monolayer graphene oxide sheets prepared under pressure condition

DEFF Research Database (Denmark)

Ryuzaki, Sou; Meyer, Jakob Abild Stengaard; Petersen, Søren Vermehren

2014-01-01

Charge transport properties of chemically reduced graphene oxide (RGO) sheets prepared by treatment with hydrazine were examined using conductive atomic force microscopy. The current-voltage (I-V) characteristics of monolayer RGO sheets prepared under atmospheric pressure followed an exponentially...
Forced Climate Changes in West Antarctica and the Indo-Pacific by Northern Hemisphere Ice Sheet Topography

Science.gov (United States)

Jones, T. R.; Roberts, W. H. G.; Steig, E. J.; Cuffey, K. M.; Markle, B. R.; White, J. W. C.

2017-12-01

The behavior of the Indo-Pacific climate system across the last deglaciation is widely debated. Resolving these debates requires long term and continuous climate proxy records. Here, we use an ultra-high resolution and continuous water isotope record from an ice core in the Pacific sector of West Antarctica. In conjunction with the HadCM3 coupled ocean-atmosphere GCM, we demonstrate that the climate of both West Antarctica and the Indo-Pacific were substantially altered during the last deglaciation by the same forcing mechanism. Critically, these changes are not dependent on ENSO strength, but rather the location of deep tropical convection, which shifts at 16 ka in response to climate perturbations induced by the Laurentide Ice Sheet. The changed rainfall patterns in the tropics explain the deglacial shift from expanded-grasslands to rainforest-dominated ecosystems in Indonesia. High-frequency climate variability in the Southern Hemisphere is also changed, through a tropical Pacific teleconnection link dependent on the propogration of Rossby Waves.
Photocatalytic perfermance of sandwich-like BiVO_4 sheets by microwave assisted synthesis

International Nuclear Information System (INIS)

Liu, Suqin; Tang, Huiling; Zhou, Huan; Dai, Gaopeng; Wang, Wanqiang

2017-01-01

Graphical abstract: Sandwich-like BiVO_4 sheets were successfully synthesized via a facile microwave-assisted method. The as-prepared samples exhibit a high activity for the degradation of methyl orange under visible light irradiation. - Highlights: • Sandwich-like BiVO_4 sheets were synthesized by a facile microwave-assisted method. • The presence of PEG-10000 plays a critical role in the formation of BiVO_4 sheets. • Ostwald ripening is the primary driving force for the formation of sandwich-like BiVO_4. • The sandwich-like BiVO_4 sheets exhibit a high visible-light photocatalytic activity. - Abstract: Sandwich-like BiVO_4 sheets were successfully synthesized in an aqueous solution containing bismuth nitrate, ammonium metavanadate and polyethylene glycol with a molecular weight of 10,000 (PEG-10000) using a facile microwave-assisted method. The as-prepared samples were characterized by scanning electron microscopy, N_2 adsorption-desorption, X-ray diffraction, X-ray photoelectron spectroscopy (XPS), and UV–vis diffuse reflectance spectroscopy. The results show that the presence of PEG-10000 plays a critical role in the formation of BiVO_4 sheets, and Ostwald ripening is the primary driving force for the formation of sandwich-like structures. The sandwich-like BiVO_4 sheets exhibit a high activity for the degradation of methyl orange under visible light irradiation (λ ≥ 420 nm). The enhancement of photocatalytic activity of sandwich-like BiVO_4 sheets can be attributed to its large surface area over the irregular BiVO_4 particles.
Lead Free Frangible Ammunition Exposure at United States Air Force Small Arms Firing Ranges, 2005 - 2007

National Research Council Canada - National Science Library

Moran, Michael P; Ott, Darrin K

2008-01-01

...) has performed related to health concerns expressed by Security Forces Combat Arms (CATM) instructors regarding exposure to contaminants generated during the discharge of lead free frangible ammunition...

First Use of Synoptic Vector Magnetograms for Global Nonlinear, Force-Free Coronal Magnetic Field Models

Science.gov (United States)

Tadesse, T.; Wiegelmann, T.; Gosain, S.; MacNeice, P.; Pevtsov, A. A.

2014-01-01

Context. The magnetic field permeating the solar atmosphere is generally thought to provide the energy for much of the activity seen in the solar corona, such as flares, coronal mass ejections (CMEs), etc. To overcome the unavailability of coronal magnetic field measurements, photospheric magnetic field vector data can be used to reconstruct the coronal field. Currently, there are several modelling techniques being used to calculate three-dimensional field lines into the solar atmosphere. Aims. For the first time, synoptic maps of a photospheric-vector magnetic field synthesized from the vector spectromagnetograph (VSM) on Synoptic Optical Long-term Investigations of the Sun (SOLIS) are used to model the coronal magnetic field and estimate free magnetic energy in the global scale. The free energy (i.e., the energy in excess of the potential field energy) is one of the main indicators used in space weather forecasts to predict the eruptivity of active regions. Methods. We solve the nonlinear force-free field equations using an optimization principle in spherical geometry. The resulting threedimensional magnetic fields are used to estimate the magnetic free energy content E(sub free) = E(sub nlfff) - E(sub pot), which is the difference of the magnetic energies between the nonpotential field and the potential field in the global solar corona. For comparison, we overlay the extrapolated magnetic field lines with the extreme ultraviolet (EUV) observations by the atmospheric imaging assembly (AIA) on board the Solar Dynamics Observatory (SDO). Results. For a single Carrington rotation 2121, we find that the global nonlinear force-free field (NLFFF) magnetic energy density is 10.3% higher than the potential one. Most of this free energy is located in active regions.
Automated force controller for amplitude modulation atomic force microscopy

Energy Technology Data Exchange (ETDEWEB)

Miyagi, Atsushi, E-mail: atsushi.miyagi@inserm.fr, E-mail: simon.scheuring@inserm.fr; Scheuring, Simon, E-mail: atsushi.miyagi@inserm.fr, E-mail: simon.scheuring@inserm.fr [U1006 INSERM, Université Aix-Marseille, Parc Scientifique et Technologique de Luminy, 163 Avenue de Luminy, 13009 Marseille (France)

2016-05-15

Atomic Force Microscopy (AFM) is widely used in physics, chemistry, and biology to analyze the topography of a sample at nanometer resolution. Controlling precisely the force applied by the AFM tip to the sample is a prerequisite for faithful and reproducible imaging. In amplitude modulation (oscillating) mode AFM, the applied force depends on the free and the setpoint amplitudes of the cantilever oscillation. Therefore, for keeping the applied force constant, not only the setpoint amplitude but also the free amplitude must be kept constant. While the AFM user defines the setpoint amplitude, the free amplitude is typically subject to uncontrollable drift, and hence, unfortunately, the real applied force is permanently drifting during an experiment. This is particularly harmful in biological sciences where increased force destroys the soft biological matter. Here, we have developed a strategy and an electronic circuit that analyzes permanently the free amplitude of oscillation and readjusts the excitation to maintain the free amplitude constant. As a consequence, the real applied force is permanently and automatically controlled with picoNewton precision. With this circuit associated to a high-speed AFM, we illustrate the power of the development through imaging over long-duration and at various forces. The development is applicable for all AFMs and will widen the applicability of AFM to a larger range of samples and to a larger range of (non-specialist) users. Furthermore, from controlled force imaging experiments, the interaction strength between biomolecules can be analyzed.
Cobalt nano-sheet supported on graphite modified paper as a binder free electrode for peroxide electrooxidation

International Nuclear Information System (INIS)

Zhang, Dongming; Cao, Dianxue; Ye, Ke; Yin, Jinling; Cheng, Kui; Wang, Guiling

2014-01-01

Graphical abstract: - Highlights: • A novel and binder free Co@graphite/paper electrode is employed for H 2 O 2 electrooxidation. • The obtained Co@graphite/paper electrode exhibits remarkably high catalytic activity and good stability for the electrooxidation of H 2 O 2 . • The high catalytic activity, low cost and environment-friendly make the Co@graphite/paper electrode as a promising anode material in DPPFC. - Abstract: A novel and binder free Co@graphite/paper electrode is prepared by electrodeposition Co nano-sheet on the surface of a graphite layer modified paper substrate. The morphology and phase structure of the Co@graphite/paper electrode are characterized by scanning electron microscopy equipped with energy dispersive X-ray spectrometer, transmission electron microscope and X-ray diffractometer. The catalytic activity of the Co@graphite/paper electrode for H 2 O 2 electrooxidation is investigated by means of cyclic voltammetry and chronoamperometry. The catalyst combines tightly with the paper and exhibits a good stability. The oxidation current density reaches to 580 mA cm −2 in 2 mol dm −3 NaOH and 0.5 mol dm −3 H 2 O 2 at 0.5 V. Besides, we illustrate the reaction mechanization of the H 2 O 2 electrooxidation on the Co film
Design of the MISMIP+, ISOMIP+, and MISOMIP ice-sheet, ocean, and coupled ice sheet-ocean intercomparison projects

Science.gov (United States)

Asay-Davis, Xylar; Cornford, Stephen; Martin, Daniel; Gudmundsson, Hilmar; Holland, David; Holland, Denise

2015-04-01

The MISMIP and MISMIP3D marine ice sheet model intercomparison exercises have become popular benchmarks, and several modeling groups have used them to show how their models compare to both analytical results and other models. Similarly, the ISOMIP (Ice Shelf-Ocean Model Intercomparison Project) experiments have acted as a proving ground for ocean models with sub-ice-shelf cavities.As coupled ice sheet-ocean models become available, an updated set of benchmark experiments is needed. To this end, we propose sequel experiments, MISMIP+ and ISOMIP+, with an end goal of coupling the two in a third intercomparison exercise, MISOMIP (the Marine Ice Sheet-Ocean Model Intercomparison Project). Like MISMIP3D, the MISMIP+ experiments take place in an idealized, three-dimensional setting and compare full 3D (Stokes) and reduced, hydrostatic models. Unlike the earlier exercises, the primary focus will be the response of models to sub-shelf melting. The chosen configuration features an ice shelf that experiences substantial lateral shear and buttresses the upstream ice, and so is well suited to melting experiments. Differences between the steady states of each model are minor compared to the response to melt-rate perturbations, reflecting typical real-world applications where parameters are chosen so that the initial states of all models tend to match observations. The three ISOMIP+ experiments have been designed to to make use of the same bedrock topography as MISMIP+ and using ice-shelf geometries from MISMIP+ results produced by the BISICLES ice-sheet model. The first two experiments use static ice-shelf geometries to simulate the evolution of ocean dynamics and resulting melt rates to a quasi-steady state when far-field forcing changes in either from cold to warm or from warm to cold states. The third experiment prescribes 200 years of dynamic ice-shelf geometry (with both retreating and advancing ice) based on a BISICLES simulation along with similar flips between warm and
Behaviour of dairy cows under free or forced cow traffic in a simulated automatic milking system environment.

NARCIS (Netherlands)

Lauwere, de C.C.K.; Hendriks, M.M.B.; Metz, J.H.M.; Schouten, W.G.P.

1998-01-01

The introduction of fully automatic milking systems (AMS) on dairy farms can only succeed if cows visit the system more or less voluntarily, at regular intervals. This can be arranged by either forced or free cow traffic. In the case of forced cow traffic, the AMS is the only route from the lying
Magnetohydrodynamic Modeling of Solar Coronal Dynamics with an Initial Non-force-free Magnetic Field

Energy Technology Data Exchange (ETDEWEB)

Prasad, A.; Bhattacharyya, R.; Kumar, Sanjay [Udaipur Solar Observatory, Physical Research Laboratory, Dewali, Bari Road, Udaipur-313001 (India)

2017-05-01

The magnetic fields in the solar corona are generally neither force-free nor axisymmetric and have complex dynamics that are difficult to characterize. Here we simulate the topological evolution of solar coronal magnetic field lines (MFLs) using a magnetohydrodynamic model. The simulation is initialized with a non-axisymmetric non-force-free magnetic field that best correlates with the observed vector magnetograms of solar active regions (ARs). To focus on these ideas, simulations are performed for the flaring AR 11283 noted for its complexity and well-documented dynamics. The simulated dynamics develops as the initial Lorentz force pushes the plasma and facilitates successive magnetic reconnections at the two X-type null lines present in the initial field. Importantly, the simulation allows for the spontaneous development of mass flow, unique among contemporary works, that preferentially reconnects field lines at one of the X-type null lines. Consequently, a flux rope consisting of low-lying twisted MFLs, which approximately traces the major polarity inversion line, undergoes an asymmetric monotonic rise. The rise is attributed to a reduction in the magnetic tension force at the region overlying the rope, resulting from the reconnection. A monotonic rise of the rope is in conformity with the standard scenario of flares. Importantly, the simulated dynamics leads to bifurcations of the flux rope, which, being akin to the observed filament bifurcation in AR 11283, establishes the appropriateness of the initial field in describing ARs.
Analisis Sosiologis Cerpen “Si Padang” Karya Harris Effendi Thahar

Directory of Open Access Journals (Sweden)

Yasnur Asri

2012-08-01

Full Text Available This paper aims at describing the reflection of social reality of Minangkabau Society in the short story entitled “Si Padang” written by Harris Effendi Thahar. The theory used in this study is the sociology of literature by using the mimetic approach. The analysis begins from the text by explaining the social factors in the text, then examining the social factors in the society that become the topic of the story. The result of the analysis shows that the short story “Si Padang”is the short story that is able to describe the social reality of Minangkabau society at present that is the inharmonious relation between maternal uncle and his nephew. As the reflection of the Minangkabau social reality this short story is social justification of Hoggart’s opinion that states the literary work at all level is enlightened by the prescript values and applied values. Because of that what Harris has written shows that his work is truly integrated with the individual and society life in the structure of the society.
Measuring fN force variations in the presence of constant nN forces: a torsion pendulum ground test of the LISA Pathfinder free-fall mode

Science.gov (United States)

Russano, G.; Cavalleri, A.; Cesarini, A.; Dolesi, R.; Ferroni, V.; Gibert, F.; Giusteri, R.; Hueller, M.; Liu, L.; Pivato, P.; Tu, H. B.; Vetrugno, D.; Vitale, S.; Weber, W. J.

2018-02-01

LISA Pathfinder is a differential accelerometer with the main goal being to demonstrate the near perfect free-fall of reference test masses, as is needed for an orbiting gravitational wave observatory, with a target sensitivity of 30 fm s‑2 Hz-1/2 at 1 mHz. Any lasting background differential acceleration between the two test masses must be actively compensated, and noise associated with the applied actuation force can be a dominant source of noise. To remove this actuation, and the associated force noise, a ‘free-fall’ actuation control scheme has been designed; actuation is limited to brief impulses, with both test masses in free-fall in the time between the impulses, allowing measurement of the remaining acceleration noise sources. In this work, we present an on-ground torsion pendulum testing campaign of this technique and associated data analysis algorithms at a level nearing the sub-femto-g/\\sqrtHz performance required for LISA Pathfinder.
Research on Computer Integrated Manufacturing of Sheet Metal Parts for Lithium Battery

Directory of Open Access Journals (Sweden)

Pan Wei-Min

2016-01-01

Full Text Available Lithium battery has been widely used as the main driving force of the new energy vehicle in recent years. Sheet metal parts are formed by means of pressure forming techniques with the characteristics of light weight, small size and high structural strength. The sheet metal forming has higher productivity and material utilization than the mechanical cutting, therefore sheet metal parts are widely used in many fields, such as modern automotive industry, aviation, aerospace, machine tools, instruments and household appliances. In this paper, taking a complex lithium battery box as an example, the integrated manufacturing of sheet metal parts is studied, and the digital integrated design and manufacturing process system is proposed. The technology is studied such as sheet metal design, unfolding, sheet nesting and laser cutting, CNC turret punch stamping programming, CNC bending etc. The feasibility of the method is verified through the examples of products and the integrated manufacturing of sheet metal box is completed.
Enhanced ice sheet melting driven by volcanic eruptions during the last deglaciation.

Science.gov (United States)

Muschitiello, Francesco; Pausata, Francesco S R; Lea, James M; Mair, Douglas W F; Wohlfarth, Barbara

2017-10-24

Volcanic eruptions can impact the mass balance of ice sheets through changes in climate and the radiative properties of the ice. Yet, empirical evidence highlighting the sensitivity of ancient ice sheets to volcanism is scarce. Here we present an exceptionally well-dated annual glacial varve chronology recording the melting history of the Fennoscandian Ice Sheet at the end of the last deglaciation (∼13,200-12,000 years ago). Our data indicate that abrupt ice melting events coincide with volcanogenic aerosol emissions recorded in Greenland ice cores. We suggest that enhanced ice sheet runoff is primarily associated with albedo effects due to deposition of ash sourced from high-latitude volcanic eruptions. Climate and snowpack mass-balance simulations show evidence for enhanced ice sheet runoff under volcanically forced conditions despite atmospheric cooling. The sensitivity of past ice sheets to volcanic ashfall highlights the need for an accurate coupling between atmosphere and ice sheet components in climate models.
The Librarian in Rowling’s Harry Potter Series

OpenAIRE

Freier, Mary P.

2014-01-01

In her article "The Librarian in Rowling's Harry Potter Series" Mary P. Freier discusses Hermione Granger's skills as a librarian and researcher which lead to the defeat of Lord Voldemort. In each novel in the series, Hermione's research provides the necessary information for the solving of the mystery. Throughout the series, Hermione proves to be the only character who can use books effectively without putting herself or others in danger. Hermione begins the series as a child who loves the l...
Latin Revived: Source-Based Vocabulary Lessons Courtesy of Harry Potter

Science.gov (United States)

Nilsen, Alleen Pace; Nilsen, Don L. F.

2006-01-01

Teachers can build on students' familiarity with and respect for the Harry Potter books to create source-based vocabulary lessons. The idea is to work with the Latin roots that J. K. Rowling uses to create original names for places, people, and magical charms and then to extend students' knowledge through exploration of additional English words…
Antibubbles and fine cylindrical sheets of air

KAUST Repository

Beilharz, D.

2015-08-14

Drops impacting at low velocities onto a pool surface can stretch out thin hemispherical sheets of air between the drop and the pool. These air sheets can remain intact until they reach submicron thicknesses, at which point they rupture to form a myriad of microbubbles. By impacting a higher-viscosity drop onto a lower-viscosity pool, we have explored new geometries of such air films. In this way we are able to maintain stable air layers which can wrap around the entire drop to form repeatable antibubbles, i.e. spherical air layers bounded by inner and outer liquid masses. Furthermore, for the most viscous drops they enter the pool trailing a viscous thread reaching all the way to the pinch-off nozzle. The air sheet can also wrap around this thread and remain stable over an extended period of time to form a cylindrical air sheet. We study the parameter regime where these structures appear and their subsequent breakup. The stability of these thin cylindrical air sheets is inconsistent with inviscid stability theory, suggesting stabilization by lubrication forces within the submicron air layer. We use interferometry to measure the air-layer thickness versus depth along the cylindrical air sheet and around the drop. The air film is thickest above the equator of the drop, but thinner below the drop and up along the air cylinder. Based on microbubble volumes, the thickness of the cylindrical air layer becomes less than 100 nm before it ruptures.
Antibubbles and fine cylindrical sheets of air

KAUST Repository

Beilharz, D.; Guyon, A.; Li, E. Q.; Thoraval, M.-J.; Thoroddsen, Sigurdur T

2015-01-01

Drops impacting at low velocities onto a pool surface can stretch out thin hemispherical sheets of air between the drop and the pool. These air sheets can remain intact until they reach submicron thicknesses, at which point they rupture to form a myriad of microbubbles. By impacting a higher-viscosity drop onto a lower-viscosity pool, we have explored new geometries of such air films. In this way we are able to maintain stable air layers which can wrap around the entire drop to form repeatable antibubbles, i.e. spherical air layers bounded by inner and outer liquid masses. Furthermore, for the most viscous drops they enter the pool trailing a viscous thread reaching all the way to the pinch-off nozzle. The air sheet can also wrap around this thread and remain stable over an extended period of time to form a cylindrical air sheet. We study the parameter regime where these structures appear and their subsequent breakup. The stability of these thin cylindrical air sheets is inconsistent with inviscid stability theory, suggesting stabilization by lubrication forces within the submicron air layer. We use interferometry to measure the air-layer thickness versus depth along the cylindrical air sheet and around the drop. The air film is thickest above the equator of the drop, but thinner below the drop and up along the air cylinder. Based on microbubble volumes, the thickness of the cylindrical air layer becomes less than 100 nm before it ruptures.
Lateral dimension-dependent antibacterial activity of graphene oxide sheets.

Science.gov (United States)

Liu, Shaobin; Hu, Ming; Zeng, Tingying Helen; Wu, Ran; Jiang, Rongrong; Wei, Jun; Wang, Liang; Kong, Jing; Chen, Yuan

2012-08-21

Graphene oxide (GO) is a promising precursor to produce graphene-family nanomaterials for various applications. Their potential health and environmental impacts need a good understanding of their cellular interactions. Many factors may influence their biological interactions with cells, and the lateral dimension of GO sheets is one of the most relevant material properties. In this study, a model bacterium, Escherichia coli ( E. coli ), was used to evaluate the antibacterial activity of well-dispersed GO sheets, whose lateral size differs by more than 100 times. Our results show that the antibacterial activity of GO sheets toward E. coli cells is lateral size dependent. Larger GO sheets show stronger antibacterial activity than do smaller ones, and they have different time- and concentration-dependent antibacterial activities. Large GO sheets lead to most cell loss after 1 h incubation, and their concentration strongly influences antibacterial activity at relative low concentration (oxidation capacity toward glutathione is similar, consistent with X-ray photoelectron spectroscopy and ultraviolet-visible absorption spectroscopy results. This suggests the lateral size-dependent antibacterial activity of GO sheets is caused by neither their aggregation states, nor oxidation capacity. Atomic force microscope analysis of GO sheets and cells shows that GO sheets interact strongly with cells. Large GO sheets more easily cover cells, and cells cannot proliferate once fully covered, resulting in the cell viability loss observed in the followed colony counting test. In contrast, small GO sheets adhere to the bacterial surfaces, which cannot effectively isolate cells from environment. This study highlights the importance of tailoring the lateral dimension of GO sheets to optimize the application potential with minimal risks for environmental health and safety.
Thermomechanical processing of plasma sprayed intermetallic sheets

Science.gov (United States)

Hajaligol, Mohammad R.; Scorey, Clive; Sikka, Vinod K.; Deevi, Seetharama C.; Fleischhauer, Grier; Lilly, Jr., A. Clifton; German, Randall M.

2001-01-01

A powder metallurgical process of preparing a sheet from a powder having an intermetallic alloy composition such as an iron, nickel or titanium aluminide. The sheet can be manufactured into electrical resistance heating elements having improved room temperature ductility, electrical resistivity, cyclic fatigue resistance, high temperature oxidation resistance, low and high temperature strength, and/or resistance to high temperature sagging. The iron aluminide has an entirely ferritic microstructure which is free of austenite and can include, in weight %, 4 to 32% Al, and optional additions such as .ltoreq.1% Cr, .gtoreq.0.05% Zr .ltoreq.2% Ti, .ltoreq.2% Mo, .ltoreq.1% Ni, .ltoreq.0.75% C, .ltoreq.0.1% B, .ltoreq.1% submicron oxide particles and/or electrically insulating or electrically conductive covalent ceramic particles, .ltoreq.1% rare earth metal, and/or .ltoreq.3% Cu. The process includes forming a non-densified metal sheet by consolidating a powder having an intermetallic alloy composition such as by roll compaction, tape casting or plasma spraying, forming a cold rolled sheet by cold rolling the non-densified metal sheet so as to increase the density and reduce the thickness thereof and annealing the cold rolled sheet. The powder can be a water, polymer or gas atomized powder which is subjecting to sieving and/or blending with a binder prior to the consolidation step. After the consolidation step, the sheet can be partially sintered. The cold rolling and/or annealing steps can be repeated to achieve the desired sheet thickness and properties. The annealing can be carried out in a vacuum furnace with a vacuum or inert atmosphere. During final annealing, the cold rolled sheet recrystallizes to an average grain size of about 10 to 30 .mu.m. Final stress relief annealing can be carried out in the B2 phase temperature range.
Ice sheets on plastically-yielding beds

Science.gov (United States)

Hewitt, Ian

2016-11-01

Many fast flowing regions of ice sheets are underlain by a layer of water-saturated sediments, or till. The rheology of the till has been the subject of some controversy, with laboratory tests suggesting almost perfectly plastic behaviour (stress independent of strain rate), but many models adopting a pseudo-viscous description. In this work, we consider the behaviour of glaciers underlain by a plastic bed. The ice is treated as a viscous gravity current, on a bed that allows unconstrained slip above a critical yield stress. This simplified description allows rapid sliding, and aims to investigate 'worst-case' scenarios of possible ice-sheet disintegration. The plastic bed results in an approximate ice-sheet geometry that is primarily controlled by force balance, whilst ice velocity is determined from mass conservation (rather than the other way around, as standard models would hold). The stability of various states is considered, and particular attention is given to the pace at which transitions between unstable states can occur. Finally, we observe that the strength of basal tills depends strongly on pore pressure, and combine the model with a description of subglacial hydrology. Implications for the present-day ice sheets in Greenland and Antarctica will be discussed. Funding: ERC Marie Curie FP7 Career Integration Grant.
Modeling in support of Corridor Resources Old Harry exploratory drilling environmental assessment

International Nuclear Information System (INIS)

2011-10-01

During offshore petroleum activities, oil spills can occur and lead to significant environmental impacts. Corridor Resources Inc. is in the process of obtaining a license for exploratory drilling activities in the Old Harry and the aim of this study is to determine what would be the behavior and trajectory of any oil spill from these activities. Two types of spill were studied, sub-sea and surface spills. Modeling was carried out using Cohasset oil from the Scotian Basin, the properties of which are thought to be close to those of Old Harry oil, and the blowout rates were determined using reservoir information. Results showed that subsea blowouts would result in wide and thin surface slicks near the source while surface blowouts would be narrow and thick; surface slicks would persist over a 5km range from the source before dispersion.
Financing gas plants using off balance sheet structures

International Nuclear Information System (INIS)

Best, R.J.; Malcolm, V.

1999-01-01

A means by which to finance oil and gas facilities using off balance sheet structures was presented. Off balance sheet facility financing means the sale by an oil and gas producer of a processing and/or transportation facility to a financial intermediary, who under a Management Agreement, appoints the producer as the operator of the facility. The financial intermediary charges a fixed processing fee to the producer and all the benefits and upside of ownership are retained by the producer. This paper deals specifically with a flexible off balance sheet facility financing structure that can be used to make effective use of discretionary capital which is committed to gas processing and to the construction of new gas processing facilities. Off balance sheet financing is an attractive alternative method of ownership that frees up capital that is locked into the facilities while allowing the producer to retain strategic control of the processing facility
Ethnic differences in the Goodenough-Harris draw-a-man and draw-a-woman tests.

Science.gov (United States)

Dugdale, A E; Chen, S T

1979-11-01

The draw-a-man (DAM) and draw-a-woman (DAW) tests were given to 307 schoolchildren in Petaling Jaya, Malaysia. The children were ethnically Malay, Chinese, or Indian (Tamil), and all came from lower socioeconomic groups. The standard scores of the Chinese children averaged 118 in the DAM and 112 in the DAW tests. These scores were significantly better than the American standards. Malay children scored significantly lower than Chinese, and Tamil children scored lower again. The nutritional status of the children had no influence on the scores. Chinese and Tamil children scored better in the DAM than the DAW, while in Malay boys the reverse was true. Malay children tended to emphasise clothing in the DAM, but Chinese and Tamil children scored better on items relating to facial features and body proportions. The Goodenough-Harris draw-a-person tests are obviously not culture-free, but the causes of ethnic differences have not been elucidated.

The role of apical contractility in determining cell morphology in multilayered epithelial sheets and tubes

Science.gov (United States)

Zhen Tan, Rui; Lai, Tanny; Chiam, K.-H.

2017-08-01

A multilayered epithelium is made up of individual cells that are stratified in an orderly fashion, layer by layer. In such tissues, individual cells can adopt a wide range of shapes ranging from columnar to squamous. From histological images, we observe that, in flat epithelia such as the skin, the cells in the top layer are squamous while those in the middle and bottom layers are columnar, whereas in tubular epithelia, the cells in all layers are columnar. We develop a computational model to understand how individual cell shape is governed by the mechanical forces within multilayered flat and curved epithelia. We derive the energy function for an epithelial sheet of cells considering intercellular adhesive and intracellular contractile forces. We determine computationally the cell morphologies that minimize the energy function for a wide range of cellular parameters. Depending on the dominant adhesive and contractile forces, we find four dominant cell morphologies for the multilayered-layered flat sheet and three dominant cell morphologies for the two-layered curved sheet. We study the transitions between the dominant cell morphologies for the two-layered flat sheet and find both continuous and discontinuous transitions and also the presence of multistable states. Matching our computational results with histological images, we conclude that apical contractile forces from the actomyosin belt in the epithelial cells is the dominant force determining cell shape in multilayered epithelia. Our computational model can guide tissue engineers in designing artificial multilayered epithelia, in terms of figuring out the cellular parameters needed to achieve realistic epithelial morphologies.
Small Victories: Reflections on Teaching "Harry Potter" to Resistant Prospective Teachers.

Science.gov (United States)

Bercaw, Lynne A.

2003-01-01

Describes the author's interactions with prospective teachers' resistances to books in the "Harry Potter" series and how she dealt with these situations. Recognizes that her role as a teacher educator includes honoring her students' beliefs, upholding the integrity of the academic discipline of children's literature, and adhering to the…
Current-Sheet Formation and Reconnection at a Magnetic X Line in Particle-in-Cell Simulations

Science.gov (United States)

Black, C.; Antiochos, S. K.; Hesse, M.; Karpen, J. T.; Kuznetsova, M. M.; Zenitani, S.

2011-01-01

The integration of kinetic effects into macroscopic numerical models is currently of great interest to the heliophysics community, particularly in the context of magnetic reconnection. Reconnection governs the large-scale energy release and topological rearrangement of magnetic fields in a wide variety of laboratory, heliophysical, and astrophysical systems. We are examining the formation and reconnection of current sheets in a simple, two-dimensional X-line configuration using high-resolution particle-in-cell (PIC) simulations. The initial minimum-energy, potential magnetic field is perturbed by excess thermal pressure introduced into the particle distribution function far from the X line. Subsequently, the relaxation of this added stress leads self-consistently to the development of a current sheet that reconnects for imposed stress of sufficient strength. We compare the time-dependent evolution and final state of our PIC simulations with macroscopic magnetohydrodynamic simulations assuming both uniform and localized electrical resistivities (C. R. DeVore et al., this meeting), as well as with force-free magnetic-field equilibria in which the amount of reconnection across the X line can be constrained to be zero (ideal evolution) or optimal (minimum final magnetic energy). We will discuss implications of our results for understanding magnetic-reconnection onset and cessation at kinetic scales in dynamically formed current sheets, such as those occurring in the solar corona and terrestrial magnetotail.
THE ROLE OF FAST MAGNETOSONIC WAVES IN THE RELEASE AND CONVERSION VIA RECONNECTION OF ENERGY STORED BY A CURRENT SHEET

Energy Technology Data Exchange (ETDEWEB)

Longcope, D. W.; Tarr, L. [Department of Physics, Montana State University, Bozeman, MT 59717 (United States)

2012-09-10

Using a simple two-dimensional, zero-{beta} model, we explore the manner by which reconnection at a current sheet releases and dissipates free magnetic energy. We find that only a small fraction (3%-11% depending on current-sheet size) of the energy is stored close enough to the current sheet to be dissipated abruptly by the reconnection process. The remaining energy, stored in the larger-scale field, is converted to kinetic energy in a fast magnetosonic disturbance propagating away from the reconnection site, carrying the initial current and generating reconnection-associated flows (inflow and outflow). Some of this reflects from the lower boundary (the photosphere) and refracts back to the X-point reconnection site. Most of this inward wave energy is reflected back again and continues to bounce between X-point and photosphere until it is gradually dissipated, over many transits. This phase of the energy dissipation process is thus global and lasts far longer than the initial purely local phase. In the process, a significant fraction of the energy (25%-60%) remains as undissipated fast magnetosonic waves propagating away from the reconnection site, primarily upward. This flare-generated wave is initiated by unbalanced Lorentz forces in the reconnection-disrupted current sheet, rather than by dissipation-generated pressure, as some previous models have assumed. Depending on the orientation of the initial current sheet, the wave front is either a rarefaction, with backward-directed flow, or a compression, with forward-directed flow.
In Defense of Harry...but Not His Defenders: Beyond Censorship to Justice

Science.gov (United States)

Glanzer, Perry L.

2004-01-01

The weaknesses of the Harry Potter series and other controversial literatures, which protect student's liberty of conscience and accomplish the ends of public education, are examined. The ways in which educators show justice to different worldviews when assigning literature are discussed.
Force-free fields in the vicinity of a Reissner-Nordstroem black hole

International Nuclear Information System (INIS)

Evangelidis, E.

1978-01-01

The behaviour of a force-free field has been studied in a Reissner-Nordstroem metric. An expansion in tensor harmonics of even-odd parity reduced the radial equations in a differential equation of the Sturm-Liouville system which was solved asymptotically in a conveniently defined space coordinate. Further, it has been possible to regularize the singular behaviour of the Reissner-Nordstroem metric at the event horizon and the modified metric to be given explicitly. (Auth.)
The lived theology of the Harry Potter series

Directory of Open Access Journals (Sweden)

Anastasia Apostolides

2014-11-01

Full Text Available This article will argue that the recent turn towards lived theology or religion in practical theology can offer a useful hermeneutic to interpret the impact of the Harry Potter series on the spiritual formation and identity creation of adolescents. In practical theology there has been a turn towards lived theology or religion as lived religion has moved out of institutions into social–cultural phenomena as people seek to find meaning and purpose for their lives in alternative places to institutionalised religion.
Blowing Up Harry Potter: Leveraging an NLM Exhibition to Your Advantage

Science.gov (United States)

Faricy-Beredo, Bridget

2013-01-01

Libraries are constantly challenged to find ways to demonstrate their value to their institutions. Can hosting a National Library of Medicine (NLM) exhibition increase a library's impact? In 2012 the University of Toledo engaged their constituents by hosting and developing programming for the NLM exhibit Harry Potter's World: Renaissance Science,…
Using Harry Potter to Introduce Students to DNA Fingerprinting & Forensic Science

Science.gov (United States)

Palmer, Laura K.

2010-01-01

This lesson uses characters from the Harry Potter series of novels as a "hook" to stimulate students' interest in introductory forensic science. Students are guided through RFLP (restriction fragment length polymorphism) analysis using inexpensive materials and asked to interpret data from a mock crime scene. Importantly, the lesson provides an…
Water-hammer experiences in the startup and early operation of the Shearon Harris plant

International Nuclear Information System (INIS)

Casada, D.

1987-01-01

During the startup testing and initial operation of any power plant, systems undergo planned transients to confirm their ability to respond as designed. In addition to planned testing, unplanned transients infrequently occur as equipment is initially used. Some of both the planned and unplanned transients result in water-hammer events. Several water-hammer events experienced during preoperational testing, power ascension testing, and early operation of the Shearon Harris nuclear power plant are presented. The cause, effect, and corrective actions undertaken to prevent recurrence for each event discussed are provided. In addition, examples of preventive measures taken, based on industry experience accrued at other plants, to prevent a similar occurrence at Shearon Harris are discussed
SPR Characteristics Curve and Distribution of Residual Stress in Self-Piercing Riveted Joints of Steel Sheets

OpenAIRE

Haque, Rezwanul; Wong, Yat C.; Paradowska, Anna; Blacket, Stuart; Durandet, Yvonne

2017-01-01

Neutron diffraction was used to describe the residual stress distributions in self-piercing riveted (SPR) joints. The sheet material displayed a compressive residual stress near the joint, and the stress gradually became tensile in the sheet material far away from the joint. The stress in the rivet leg was lower in the thick joint of the softer steel sheet than in the thin joint of the harder steel sheet. This lower magnitude was attributed to the lower force gradient during the rivet flaring...
The Potsdam Parallel Ice Sheet Model (PISM-PIK) - Part 2: Dynamic equilibrium simulation of the Antarctic ice sheet

Science.gov (United States)

Martin, M. A.; Winkelmann, R.; Haseloff, M.; Albrecht, T.; Bueler, E.; Khroulev, C.; Levermann, A.

2011-09-01

We present a dynamic equilibrium simulation of the ice sheet-shelf system on Antarctica with the Potsdam Parallel Ice Sheet Model (PISM-PIK). The simulation is initialized with present-day conditions for bed topography and ice thickness and then run to steady state with constant present-day surface mass balance. Surface temperature and sub-shelf basal melt distribution are parameterized. Grounding lines and calving fronts are free to evolve, and their modeled equilibrium state is compared to observational data. A physically-motivated calving law based on horizontal spreading rates allows for realistic calving fronts for various types of shelves. Steady-state dynamics including surface velocity and ice flux are analyzed for whole Antarctica and the Ronne-Filchner and Ross ice shelf areas in particular. The results show that the different flow regimes in sheet and shelves, and the transition zone between them, are captured reasonably well, supporting the approach of superposition of SIA and SSA for the representation of fast motion of grounded ice. This approach also leads to a natural emergence of sliding-dominated flow in stream-like features in this new 3-D marine ice sheet model.
Artifact-free dynamic atomic force microscopy reveals monotonic dissipation for a simple confined liquid

Science.gov (United States)

Kaggwa, G. B.; Kilpatrick, J. I.; Sader, J. E.; Jarvis, S. P.

2008-07-01

We present definitive interaction measurements of a simple confined liquid (octamethylcyclotetrasiloxane) using artifact-free frequency modulation atomic force microscopy. We use existing theory to decouple the conservative and dissipative components of the interaction, for a known phase offset from resonance (90° phase shift), that has been deliberately introduced into the experiment. Further we show the qualitative influence on the conservative and dissipative components of the interaction of a phase error deliberately introduced into the measurement, highlighting that artifacts, such as oscillatory dissipation, can be readily observed when the phase error is not compensated for in the force analysis.
Interlocking multi-material components made of structured steel sheets and high-pressure die cast aluminium

Science.gov (United States)

Senge, S.; Brachmann, J.; Hirt, G.; Bührig-Polaczek, A.

2017-10-01

Lightweight design is a major driving force of innovation, especially in the automotive industry. Using hybrid components made of two or more different materials is one approach to reduce the vehicles weight and decrease fuel consumption. As a possible way to increase the stiffness of multi-material components, this paper presents a process chain to produce such components made of steel sheets and high-pressure die cast aluminium. Prior to the casting sequence the steel sheets are structured in a modified rolling process which enables continuous interlocking with the aluminium. Two structures manufactured by this rolling process are tested. The first one is a channel like structure and the second one is a channel like structure with undercuts. These undercuts enable the formation of small anchors when the molten aluminium fills them. The correlation between thickness reduction during rolling and the shape of the resulting structure was evaluated for both structures. It can be stated that channels with a depth of up to 0.5 mm and a width of 1 mm could be created. Undercuts with different size depending on the thickness reduction could be realised. Subsequent aluminium high-pressure die casting experiments were performed to determine if the surface structure can be filled gap-free with molten aluminium during the casting sequence and if a gap-free connection can be achieved after contraction of the aluminium. The casting experiments showed that both structures could be filled during the high-pressure die casting. The channel like structure results in a gap between steel and aluminium after contraction of the cast metal whereas the structure with undercuts leads to a good interlocking resulting in a gap-free connection.
Long-term ice sheet-climate interactions under anthropogenic greenhouse forcing simulated with a complex Earth System Model

Energy Technology Data Exchange (ETDEWEB)

Vizcaino, Miren [Max-Planck-Institut fuer Meteorologie, Hamburg (Germany); University of California, Department of Geography, Berkeley, CA (United States); Mikolajewicz, Uwe; Maier-Reimer, Ernst [Max-Planck-Institut fuer Meteorologie, Hamburg (Germany); Groeger, Matthias [Max-Planck-Institut fuer Meteorologie, Hamburg (Germany); IFM-GEOMAR, Kiel (Germany); Schurgers, Guy [Max-Planck-Institut fuer Meteorologie, Hamburg (Germany); Lund University, Department of Physical Geography and Ecosystems Analysis, Lund (Sweden); Winguth, Arne M.E. [Center for Climatic Research, Department of Atmospheric and Oceanic Sciences, Madison (United States)

2008-11-15

Several multi-century and multi-millennia simulations have been performed with a complex Earth System Model (ESM) for different anthropogenic climate change scenarios in order to study the long-term evolution of sea level and the impact of ice sheet changes on the climate system. The core of the ESM is a coupled coarse-resolution Atmosphere-Ocean General Circulation Model (AOGCM). Ocean biogeochemistry, land vegetation and ice sheets are included as components of the ESM. The Greenland Ice Sheet (GrIS) decays in all simulations, while the Antarctic ice sheet contributes negatively to sea level rise, due to enhanced storage of water caused by larger snowfall rates. Freshwater flux increases from Greenland are one order of magnitude smaller than total freshwater flux increases into the North Atlantic basin (the sum of the contribution from changes in precipitation, evaporation, run-off and Greenland meltwater) and do not play an important role in changes in the strength of the North Atlantic Meridional Overturning Circulation (NAMOC). The regional climate change associated with weakening/collapse of the NAMOC drastically reduces the decay rate of the GrIS. The dynamical changes due to GrIS topography modification driven by mass balance changes act first as a negative feedback for the decay of the ice sheet, but accelerate the decay at a later stage. The increase of surface temperature due to reduced topographic heights causes a strong acceleration of the decay of the ice sheet in the long term. Other feedbacks between ice sheet and atmosphere are not important for the mass balance of the GrIS until it is reduced to 3/4 of the original size. From then, the reduction in the albedo of Greenland strongly accelerates the decay of the ice sheet. (orig.)
Driving reconnection in sheared magnetic configurations with forced fluctuations

Science.gov (United States)

Pongkitiwanichakul, Peera; Makwana, Kirit D.; Ruffolo, David

2018-02-01

We investigate reconnection of magnetic field lines in sheared magnetic field configurations due to fluctuations driven by random forcing by means of numerical simulations. The simulations are performed with an incompressible, pseudo-spectral magnetohydrodynamics code in 2D where we take thick, resistively decaying, current-sheet like sheared magnetic configurations which do not reconnect spontaneously. We describe and test the forcing that is introduced in the momentum equation to drive fluctuations. It is found that the forcing does not change the rate of decay; however, it adds and removes energy faster in the presence of the magnetic shear structure compared to when it has decayed away. We observe that such a forcing can induce magnetic reconnection due to field line wandering leading to the formation of magnetic islands and O-points. These reconnecting field lines spread out as the current sheet decays with time. A semi-empirical formula is derived which reasonably explains the formation and spread of O-points. We find that reconnection spreads faster with stronger forcing and longer correlation time of forcing, while the wavenumber of forcing does not have a significant effect. When the field line wandering becomes large enough, the neighboring current sheets with opposite polarity start interacting, and then the magnetic field is rapidly annihilated. This work is useful to understand how forced fluctuations can drive reconnection in large scale current structures in space and astrophysical plasmas that are not susceptible to reconnection.
Formation and interpretation of eskers beneath retreating ice sheets

Science.gov (United States)

Creyts, T. T.; Hewitt, I.

2017-12-01

The retreat of the ice sheets during the Pleistocene left large and spectacular subglacial features exposed. Understanding these features gives us insight into how the ice sheets retreated, how meltwater influenced retreat, and can help inform our understanding of potential future rates of ice sheet retreat. Among these features, eskers, long sinuous ridges primarily composed of clastic sediments, lack a detailed explanation of how surface melt rates and ice sheet retreat rates influence their growth and spatial distribution. Here, we develop a theory for esker formation based on the initial work of Rothlisberger modified for sediment transport and inclusion of surface meltwater forcing. The primary subglacial ingredients include water flow through subglacial tunnels with the addition of mass balances for sediment transport. We show how eskers when water flow slows below a critical stress for sediment motion. This implies that eskers are deposited in a localized region near the snout of the ice sheet. Our findings suggest that very long eskers form sequentially as the ice front retreats. The position of the esker follows the path of the channel mouth through time, which does not necessarily coincide with the instantaneous route of the feeding channel. However, in most cases, we expect those locations to be similar. The role of surface meltwater and the climatology associated with the forcing is crucial to the lateral spacing of the eskers. We predict that high surface melt rates lead to narrower catchments but that the greater extent of the ablation area means that channels are likely larger. At the same time, for a given channel size (and hence sediment flux), the size of a deposited esker depends on a margin retreat rate. Hence, the size of the eskers is related delicately to the balance between surface melt rates and margin retreat rates. We discuss how our theory can be combined with observed esker distributions to infer the relationship between these two rates
Tuning the mechanical properties of vertical graphene sheets through atomic layer deposition

International Nuclear Information System (INIS)

Davami, Keivan; Jiang, Yijie; Cortes, John; Lin, Chen; Turner, Kevin T; Bargatin, Igor; Shaygan, Mehrdad

2016-01-01

We report the fabrication and characterization of graphene nanostructures with mechanical properties that are tuned by conformal deposition of alumina. Vertical graphene (VG) sheets, also called carbon nanowalls (CNWs), were grown on copper foil substrates using a radio-frequency plasma-enhanced chemical vapor deposition (RF-PECVD) technique and conformally coated with different thicknesses of alumina (Al_2O_3) using atomic layer deposition (ALD). Nanoindentation was used to characterize the mechanical properties of pristine and alumina-coated VG sheets. Results show a significant increase in the effective Young’s modulus of the VG sheets with increasing thickness of deposited alumina. Deposition of only a 5 nm thick alumina layer on the VG sheets nearly triples the effective Young’s modulus of the VG structures. Both energy absorption and strain recovery were lower in VG sheets coated with alumina than in pure VG sheets (for the same peak force). This may be attributed to the increase in bending stiffness of the VG sheets and the creation of connections between the sheets after ALD deposition. These results demonstrate that the mechanical properties of VG sheets can be tuned over a wide range through conformal atomic layer deposition, facilitating the use of VG sheets in applications where specific mechanical properties are needed. (paper)
Induced motion of a sphere due to a flexible elastic sheet

Science.gov (United States)

Rallabandi, Bhargav; Oppenheimer, Naomi; Salez, Thomas; Stone, Howard A.

2017-11-01

A sphere translating parallel to a rigid wall in Stokes flow experiences an increased drag but no normal force. In contrast, a sphere translating along the surface of a soft elastic substrate experiences an induced normal force due to the coupling between hydrodynamic stresses and elastic deformation. Here, we use theory and experiments to show that an analogous effect occurs for a particle moving near a flexible elastic membrane with bending and stretching resistances. Applying the Lorentz reciprocal theorem in the lubrication limit, we find that the induced force on the particle is repulsive, scaling with the square of its translational speed and inversely with the bending modulus and tension of the membrane. The theoretical predictions are validated by experiments of a sphere driven by gravity down a vertically suspended elastic sheet, where we observe a spontaneous motion of the sphere away from the sheet. The general theoretical approach and the specific results are pertinent to the dynamics of objects near biological membranes and other deformable interfaces.
Who will save the tokamak - Harry Potter, Arnold Schwarzenegger, or Shaquille O'Neil?

Science.gov (United States)

Freidberg, J.; Mangiarotti, F.; Minervini, J.

2014-10-01

The tokamak is the current leading contender for a fusion power reactor. The reason for the preeminence of the tokamak is its high quality plasma physics performance relative to other concepts. Even so, it is well known that the tokamak must still overcome two basic physics challenges before becoming viable as a DEMO and ultimately a reactor: (1) the achievement of non-inductive steady state operation, and (2) the achievement of robust disruption free operation. These are in addition to the PMI problems faced by all concepts. The work presented here demonstrates by means of a simple but highly credible analytic calculation that a ``standard'' tokamak cannot lead to a reactor - it is just not possible to simultaneously satisfy all the plasma physics plus engineering constraints. Three possible solutions, some more well-known than others, to the problem are analyzed. These visual image generating solutions are defined as (1) the Harry Potter solution, (2) the Arnold Schwarzenegger solution, and (3) the Shaquille O'Neil solution. Each solution will be described both qualitatively and quantitatively at the meeting.

Perforation of metal sheets

DEFF Research Database (Denmark)

Steenstrup, Jens Erik

simulation is focused on the sheet deformation. However, the effect on the tool and press is included. The process model is based on the upper bound analysis in order to predict the force progress and hole characteristics etc. Parameter analyses are divided into two groups, simulation and experimental tests......The main purposes of this project are:1. Development of a dynamic model for the piercing and performation process2. Analyses of the main parameters3. Establishing demands for process improvements4. Expansion of the existing parameter limitsThe literature survey describes the process influence...
Backbending feature of rotational spectra in the generalized variable-moment-of-inertia model and its equivalence with the Harris model

International Nuclear Information System (INIS)

Mantri, A.N.

1975-01-01

The equivalence of Harris model equations with those of the generalized variable-moment-of-inertia (GVMI) model given by Das et al. is examined in the light of backbending feature of the rotational states. It is shown that this feature is absent in the Harris model taken to any order. The GVMI model equations are found to be consistent and in one-to-one correspondence with an expansion of the square of the angular velocity in terms of a polynomial in the moment of inertia rather than with the Harris expansion and may give a backbending feature in some cases depending on the relative values of the parameters appearing in the potential energy term
Harry Potter (II): Intertekstualiteit en literêre genres in die reeks ...

African Journals Online (AJOL)

This article explores the intrinsic criteria that are applied to discover the literary value of the Harry Potter texts. The aim of the article is to equip educators of Afrikaans in the intermediate and senior school phases with background knowledge by providing an overview of discussions and commentaries on the literary genres in ...
Modified Unzipping Technique to Prepare Graphene Nano-Sheets

Science.gov (United States)

Al-Tamimi, B. H.; Farid, S. B. H.; Chyad, F. A.

2018-05-01

Graphene nano-sheets have been prepared via unzipping approach of multiwall carbon nanotubes (MWCNTs). The method includes two chemical-steps, in which a multi-parameter oxidation step is performed to achieve unzipping the carbon nanotubes. Then, a reduction step is carried out to achieve the final graphene nano-sheets. In the oxidation step, the oxidant material was minimized and balanced with longer curing time. This modification is made in order to reduce the oxygen-functional groups at the ends of graphene basal planes, which reduce its electrical conductivity. In addition, a similar adjustment is achieved in the reduction step, i.e. the consumed chemicals is reduced which make the overall process more economic and eco-friendly. The prepared nano-sheets were characterized by atomic force microscopy, scanning electron microscopy, and Raman spectroscopy. The average thickness of the prepared graphene was about 5.23 nm.
Interaction of ice sheets and climate during the past 800 000 years

Science.gov (United States)

Stap, L. B.; van de Wal, R. S. W.; de Boer, B.; Bintanja, R.; Lourens, L. J.

2014-12-01

During the Cenozoic, land ice and climate interacted on many different timescales. On long timescales, the effect of land ice on global climate and sea level is mainly set by large ice sheets in North America, Eurasia, Greenland and Antarctica. The climatic forcing of these ice sheets is largely determined by the meridional temperature profile resulting from radiation and greenhouse gas (GHG) forcing. As a response, the ice sheets cause an increase in albedo and surface elevation, which operates as a feedback in the climate system. To quantify the importance of these climate-land ice processes, a zonally averaged energy balance climate model is coupled to five one-dimensional ice sheet models, representing the major ice sheets. In this study, we focus on the transient simulation of the past 800 000 years, where a high-confidence CO2 record from ice core samples is used as input in combination with Milankovitch radiation changes. We obtain simulations of atmospheric temperature, ice volume and sea level that are in good agreement with recent proxy-data reconstructions. We examine long-term climate-ice-sheet interactions by a comparison of simulations with uncoupled and coupled ice sheets. We show that these interactions amplify global temperature anomalies by up to a factor of 2.6, and that they increase polar amplification by 94%. We demonstrate that, on these long timescales, the ice-albedo feedback has a larger and more global influence on the meridional atmospheric temperature profile than the surface-height-temperature feedback. Furthermore, we assess the influence of CO2 and insolation by performing runs with one or both of these variables held constant. We find that atmospheric temperature is controlled by a complex interaction of CO2 and insolation, and both variables serve as thresholds for northern hemispheric glaciation.
Interaction of ice sheets and climate during the past 800 000 years

Directory of Open Access Journals (Sweden)

L. B. Stap

2014-12-01

Full Text Available During the Cenozoic, land ice and climate interacted on many different timescales. On long timescales, the effect of land ice on global climate and sea level is mainly set by large ice sheets in North America, Eurasia, Greenland and Antarctica. The climatic forcing of these ice sheets is largely determined by the meridional temperature profile resulting from radiation and greenhouse gas (GHG forcing. As a response, the ice sheets cause an increase in albedo and surface elevation, which operates as a feedback in the climate system. To quantify the importance of these climate–land ice processes, a zonally averaged energy balance climate model is coupled to five one-dimensional ice sheet models, representing the major ice sheets. In this study, we focus on the transient simulation of the past 800 000 years, where a high-confidence CO2 record from ice core samples is used as input in combination with Milankovitch radiation changes. We obtain simulations of atmospheric temperature, ice volume and sea level that are in good agreement with recent proxy-data reconstructions. We examine long-term climate–ice-sheet interactions by a comparison of simulations with uncoupled and coupled ice sheets. We show that these interactions amplify global temperature anomalies by up to a factor of 2.6, and that they increase polar amplification by 94%. We demonstrate that, on these long timescales, the ice-albedo feedback has a larger and more global influence on the meridional atmospheric temperature profile than the surface-height-temperature feedback. Furthermore, we assess the influence of CO2 and insolation by performing runs with one or both of these variables held constant. We find that atmospheric temperature is controlled by a complex interaction of CO2 and insolation, and both variables serve as thresholds for northern hemispheric glaciation.
MORAL ENHANCEMENT VIA DIRECT EMOTION MODULATION: A REPLY TO JOHN HARRIS

Science.gov (United States)

Douglas, Thomas

2013-01-01

Some argue that humans should enhance their moral capacities by adopting institutions that facilitate morally good motives and behaviour. I have defended a parallel claim: that we could permissibly use biomedical technologies to enhance our moral capacities, for example by attenuating certain counter-moral emotions. John Harris has recently responded to my argument by raising three concerns about the direct modulation of emotions as a means to moral enhancement. He argues (1) that such means will be relatively ineffective in bringing about moral improvements, (2) that direct modulation of emotions would invariably come at an unacceptable cost to our freedom, and (3) that we might end up modulating emotions in ways that actually lead to moral decline. In this article I outline some counter-intuitive potential implications of Harris' claims. I then respond individually to his three concerns, arguing that they license only the very weak conclusion that moral enhancement via direct emotion modulation is sometimes impermissible. However I acknowledge that his third concern might, with further argument, be developed into a more troubling objection to such enhancements. PMID:22092503
Moral enhancement via direct emotion modulation: a reply to John Harris.

Science.gov (United States)

Douglas, Thomas

2013-03-01

Some argue that humans should enhance their moral capacities by adopting institutions that facilitate morally good motives and behaviour. I have defended a parallel claim: that we could permissibly use biomedical technologies to enhance our moral capacities, for example by attenuating certain counter-moral emotions. John Harris has recently responded to my argument by raising three concerns about the direct modulation of emotions as a means to moral enhancement. He argues (1) that such means will be relatively ineffective in bringing about moral improvements, (2) that direct modulation of emotions would invariably come at an unacceptable cost to our freedom, and (3) that we might end up modulating emotions in ways that actually lead to moral decline. In this article I outline some counter-intuitive potential implications of Harris' claims. I then respond individually to his three concerns, arguing that they license only the very weak conclusion that moral enhancement via direct emotion modulation is sometimes impermissible. However I acknowledge that his third concern might, with further argument, be developed into a more troubling objection to such enhancements. © 2011 Blackwell Publishing Ltd.
Photocatalytic perfermance of sandwich-like BiVO{sub 4} sheets by microwave assisted synthesis

Energy Technology Data Exchange (ETDEWEB)

Liu, Suqin, E-mail: liusuqin888@126.com [Department of Chemical engineering and Food Science, Hubei University of arts and science, Xiangyang 441053 (China); Hubei Key Laboratory of Low Dimensional Optoelectronic Materials and Devices, Xiangyang 441053 (China); Tang, Huiling; Zhou, Huan [Department of Chemical engineering and Food Science, Hubei University of arts and science, Xiangyang 441053 (China); Dai, Gaopeng, E-mail: dgp2000@126.com [Department of Chemical engineering and Food Science, Hubei University of arts and science, Xiangyang 441053 (China); Wang, Wanqiang [Department of Chemical engineering and Food Science, Hubei University of arts and science, Xiangyang 441053 (China)

2017-01-01

Graphical abstract: Sandwich-like BiVO{sub 4} sheets were successfully synthesized via a facile microwave-assisted method. The as-prepared samples exhibit a high activity for the degradation of methyl orange under visible light irradiation. - Highlights: • Sandwich-like BiVO{sub 4} sheets were synthesized by a facile microwave-assisted method. • The presence of PEG-10000 plays a critical role in the formation of BiVO{sub 4} sheets. • Ostwald ripening is the primary driving force for the formation of sandwich-like BiVO{sub 4}. • The sandwich-like BiVO{sub 4} sheets exhibit a high visible-light photocatalytic activity. - Abstract: Sandwich-like BiVO{sub 4} sheets were successfully synthesized in an aqueous solution containing bismuth nitrate, ammonium metavanadate and polyethylene glycol with a molecular weight of 10,000 (PEG-10000) using a facile microwave-assisted method. The as-prepared samples were characterized by scanning electron microscopy, N{sub 2} adsorption-desorption, X-ray diffraction, X-ray photoelectron spectroscopy (XPS), and UV–vis diffuse reflectance spectroscopy. The results show that the presence of PEG-10000 plays a critical role in the formation of BiVO{sub 4} sheets, and Ostwald ripening is the primary driving force for the formation of sandwich-like structures. The sandwich-like BiVO{sub 4} sheets exhibit a high activity for the degradation of methyl orange under visible light irradiation (λ ≥ 420 nm). The enhancement of photocatalytic activity of sandwich-like BiVO{sub 4} sheets can be attributed to its large surface area over the irregular BiVO{sub 4} particles.
Detection of honeycomb cell walls from measurement data based on Harris corner detection algorithm

Science.gov (United States)

Qin, Yan; Dong, Zhigang; Kang, Renke; Yang, Jie; Ayinde, Babajide O.

2018-06-01

A honeycomb core is a discontinuous material with a thin-wall structure—a characteristic that makes accurate surface measurement difficult. This paper presents a cell wall detection method based on the Harris corner detection algorithm using laser measurement data. The vertexes of honeycomb cores are recognized with two different methods: one method is the reduction of data density, and the other is the optimization of the threshold of the Harris corner detection algorithm. Each cell wall is then identified in accordance with the neighboring relationships of its vertexes. Experiments were carried out for different types and surface shapes of honeycomb cores, where the proposed method was proved effective in dealing with noise due to burrs and/or deformation of cell walls.
Antarctic climate and ice-sheet configuration during the early Pliocene interglacial at 4.23 Ma

Science.gov (United States)

Golledge, Nicholas R.; Thomas, Zoë A.; Levy, Richard H.; Gasson, Edward G. W.; Naish, Timothy R.; McKay, Robert M.; Kowalewski, Douglas E.; Fogwill, Christopher J.

2017-07-01

The geometry of Antarctic ice sheets during warm periods of the geological past is difficult to determine from geological evidence, but is important to know because such reconstructions enable a more complete understanding of how the ice-sheet system responds to changes in climate. Here we investigate how Antarctica evolved under orbital and greenhouse gas conditions representative of an interglacial in the early Pliocene at 4.23 Ma, when Southern Hemisphere insolation reached a maximum. Using offline-coupled climate and ice-sheet models, together with a new synthesis of high-latitude palaeoenvironmental proxy data to define a likely climate envelope, we simulate a range of ice-sheet geometries and calculate their likely contribution to sea level. In addition, we use these simulations to investigate the processes by which the West and East Antarctic ice sheets respond to environmental forcings and the timescales over which these behaviours manifest. We conclude that the Antarctic ice sheet contributed 8.6 ± 2.8 m to global sea level at this time, under an atmospheric CO2 concentration identical to present (400 ppm). Warmer-than-present ocean temperatures led to the collapse of West Antarctica over centuries, whereas higher air temperatures initiated surface melting in parts of East Antarctica that over one to two millennia led to lowering of the ice-sheet surface, flotation of grounded margins in some areas, and retreat of the ice sheet into the Wilkes Subglacial Basin. The results show that regional variations in climate, ice-sheet geometry, and topography produce long-term sea-level contributions that are non-linear with respect to the applied forcings, and which under certain conditions exhibit threshold behaviour associated with behavioural tipping points.
EFFECT OF POLARIMETRIC NOISE ON THE ESTIMATION OF TWIST AND MAGNETIC ENERGY OF FORCE-FREE FIELDS

International Nuclear Information System (INIS)

Tiwari, Sanjiv Kumar; Venkatakrishnan, P.; Gosain, Sanjay; Joshi, Jayant

2009-01-01

The force-free parameter α, also known as helicity parameter or twist parameter, bears the same sign as the magnetic helicity under some restrictive conditions. The single global value of α for a whole active region gives the degree of twist per unit axial length. We investigate the effect of polarimetric noise on the calculation of global α value and magnetic energy of an analytical bipole. The analytical bipole has been generated using the force-free field approximation with a known value of constant α and magnetic energy. The magnetic parameters obtained from the analytical bipole are used to generate Stokes profiles from the Unno-Rachkovsky solutions for polarized radiative transfer equations. Then we add random noise of the order of 10 -3 of the continuum intensity (I c ) in these profiles to simulate the real profiles obtained by modern spectropolarimeters such as Hinode (SOT/SP), SVM (USO), ASP, DLSP, POLIS, and SOLIS etc. These noisy profiles are then inverted using a Milne-Eddington inversion code to retrieve the magnetic parameters. Hundred realizations of this process of adding random noise and polarimetric inversion is repeated to study the distribution of error in global α and magnetic energy values. The results show that (1) the sign of α is not influenced by polarimetric noise and very accurate values of global twist can be calculated, and (2) accurate estimation of magnetic energy with uncertainty as low as 0.5% is possible under the force-free condition.
MHD forced and free convection boundary layer flow near the leading edge

International Nuclear Information System (INIS)

Hossain, M.A.; Ahmed, M.

1988-07-01

Magnetohydrodynamic forced and free convection flow of an electrically conducting viscous incompressible fluid past a vertical flat plate with uniform heat flux in the presence of a magnetic field acting normal to the plate that moves with the fluid has been studied near the leading edge of the plate. The coupled non-linear equations are solved by the method of superposition for the values of the Prandtl number ranges from 0.01 to 10.0. The velocity and the temperature profiles are presented graphically and the values of the wall shear-stress as well as the heat transfer rate are presented in tabular form showing the effect of the buoyancy force and the applied magnetic field. To show the accuracy of the present method some typical values are compared with the available one. (author). 17 refs, 3 figs, 2 tabs
Oscillatory Critical Amplitudes in Hierarchical Models and the Harris Function of Branching Processes

Science.gov (United States)

Costin, Ovidiu; Giacomin, Giambattista

2013-02-01

Oscillatory critical amplitudes have been repeatedly observed in hierarchical models and, in the cases that have been taken into consideration, these oscillations are so small to be hardly detectable. Hierarchical models are tightly related to iteration of maps and, in fact, very similar phenomena have been repeatedly reported in many fields of mathematics, like combinatorial evaluations and discrete branching processes. It is precisely in the context of branching processes with bounded off-spring that T. Harris, in 1948, first set forth the possibility that the logarithm of the moment generating function of the rescaled population size, in the super-critical regime, does not grow near infinity as a power, but it has an oscillatory prefactor (the Harris function). These oscillations have been observed numerically only much later and, while the origin is clearly tied to the discrete character of the iteration, the amplitude size is not so well understood. The purpose of this note is to reconsider the issue for hierarchical models and in what is arguably the most elementary setting—the pinning model—that actually just boils down to iteration of polynomial maps (and, notably, quadratic maps). In this note we show that the oscillatory critical amplitude for pinning models and the Harris function coincide. Moreover we make explicit the link between these oscillatory functions and the geometry of the Julia set of the map, making thus rigorous and quantitative some ideas set forth in Derrida et al. (Commun. Math. Phys. 94:115-132, 1984).
The Harris hip score: Do ceiling effects limit its usefulness in orthopedics?

NARCIS (Netherlands)

Wamper, K.E.; Sierevelt, I.N.; Poolman, R.W.; Bhandari, M.; Haverkamp, D.

2010-01-01

The Harris hip score (HHS), a disease-specific health status scale that is frequently used to measure the outcome of total hip arthroplasty, has never been validated properly. A questionnaire is suitable only when all 5 psychometric properties are of sufficient quality. We questioned the usefulness
The Potsdam Parallel Ice Sheet Model (PISM-PIK – Part 2: Dynamic equilibrium simulation of the Antarctic ice sheet

Directory of Open Access Journals (Sweden)

M. A. Martin

2011-09-01

Full Text Available We present a dynamic equilibrium simulation of the ice sheet-shelf system on Antarctica with the Potsdam Parallel Ice Sheet Model (PISM-PIK. The simulation is initialized with present-day conditions for bed topography and ice thickness and then run to steady state with constant present-day surface mass balance. Surface temperature and sub-shelf basal melt distribution are parameterized. Grounding lines and calving fronts are free to evolve, and their modeled equilibrium state is compared to observational data. A physically-motivated calving law based on horizontal spreading rates allows for realistic calving fronts for various types of shelves. Steady-state dynamics including surface velocity and ice flux are analyzed for whole Antarctica and the Ronne-Filchner and Ross ice shelf areas in particular. The results show that the different flow regimes in sheet and shelves, and the transition zone between them, are captured reasonably well, supporting the approach of superposition of SIA and SSA for the representation of fast motion of grounded ice. This approach also leads to a natural emergence of sliding-dominated flow in stream-like features in this new 3-D marine ice sheet model.
Theoretical models of non-Maxwellian equilibria for one-dimensional collisionless plasmas

Science.gov (United States)

Allanson, O.; Neukirch, T.; Wilson, F.; Troscheit, S.

2016-12-01

It is ideal to use exact equilibrium solutions of the steady state Vlasov-Maxwell system to intialise collsionless simulations. However, exact equilibrium distribution functions (DFs) for a given macroscopic configuration are typically unknown, and it is common to resort to using `flow-shifted' Maxwellian DFs in their stead. These DFs may be consistent with a macrosopic system with the target number density and current density, but could well have inaccurate higher order moments. We present recent theoretical work on the `inverse problem in Vlasov-Maxwell equilibria', namely calculating an exact solution of the Vlasov equation for a specific given magnetic field. In particular, we focus on one-dimensional geometries in Cartesian (current sheets) coordinates.1. From 1D fields to Vlasov equilibria: Theory and application of Hermite Polynomials: (O. Allanson, T. Neukirch, S. Troscheit and F. Wilson, Journal of Plasma Physics, 82, 905820306 (2016) [28 pages, Open Access] )2. An exact collisionless equilibrium for the Force-Free Harris Sheet with low plasma beta: (O. Allanson, T. Neukirch, F. Wilson and S. Troscheit, Physics of Plasmas, 22, 102116 (2015) [11 pages, Open Access])3. Neutral and non-neutral collisionless plasma equilibria for twisted flux tubes: The Gold-Hoyle model in a background field (O. Allanson, F. Wilson and T. Neukirch, (2016)) (accepted, Physics of Plasmas)
Fabrication of corneal epithelial cell sheets maintaining colony-forming cells without feeder cells by oxygen-controlled method.

Science.gov (United States)

Nakajima, Ryota; Takeda, Shizu

2014-01-01

The use of murine 3T3 feeder cells needs to be avoided when fabricating corneal epithelial cell sheets for use in treating ocular surface diseases. However, the expression level of the epithelial stem/progenitor cell marker, p63, is down-regulated in feeder-free culture systems. In this study, in order to fabricate corneal epithelial cell sheets that maintain colony-forming cells without using any feeder cells, we investigated the use of an oxygen-controlled method that was developed previously to fabricate cell sheets efficiently. Rabbit limbal epithelial cells were cultured under hypoxia (1-10% O2) and under normoxia during stratification after reaching confluence. Multilayered corneal epithelial cell sheets were fabricated using an oxygen-controlled method, and immunofluorescence analysis showed that cytokeratin 3 and p63 was expressed in appropriate localization in the cell sheets. The colony-forming efficiency of the cell sheets fabricated by the oxygen-controlled method without feeder cells was significantly higher than that of cell sheets fabricated under 20% O2 without feeder cells. These results indicate that the oxygen-controlled method has the potential to achieve a feeder-free culture system for fabricating corneal epithelial cell sheets for corneal regeneration. Copyright © 2013 Elsevier Ltd. All rights reserved.
Ground reaction force comparison of bilateral symmetry with pneumatic resistance squat device and free weights - biomed 2009.

Science.gov (United States)

Paulus, David C; Schilling, Brian K

2009-01-01

The unloading of spaceflight leads to bone and muscle atrophy, and a pneumatic resistance squat exercise countermeasure has the potential to provide optimized controllable resistance in a lightweight and compact configuration. However each end of the barbell in the proposed device is connected to a separate resistance cylinder which could lead to bilaterally asymmetric loading. Therefore, the purpose of the study is to compare the unilateral ground reaction forces (GRF) of the new squat device compared to free weights. Four previously trained men (mean +/- SD; age = 20+/-2 years, body mass = 99+/-18 kg) performed three sets of three repetitions of maximal exertion squat exercises with pneumatically controlled constant resistance and free weights each with a resistance level set to half of the body weight of each subject. Unilateral GRF data for each lifting modality at the negative to positive transition of the squat exercise was measured with a force plate under each foot. The pneumatic resistance GRF (N; mean +/- SD) was 749+/-114 on the left leg and 786+/-123 on the right leg and the free weight GRF was 786+/-114 left and 861+/-111 right resulting in a 5% difference between left and right GRF with pneumatics and 9% difference with free weights. The correlation coefficient between left and right GRF was 0.92 with pneumatics and 0.80 with free weights. Because the pneumatic device elicited more bilaterally symmetric GRF than traditional free weights, the separate resistance cylinders are an acceptable design configuration.
Challenging Expertise: Paul Feyerabend vs. Harry Collins & Robert Evans on democracy, public participation and scientific authority: Paul Feyerabend vs. Harry Collins & Robert Evans on scientific authority and public participation.

Science.gov (United States)

Sorgner, Helene

2016-06-01

This paper compares Feyerabend's arguments in Science in a Free Society to the controversial theory of expertise proposed by Harry Collins and Robert Evans as a Third Wave of Science Studies. Is the legitimacy of democratic decisions threatened by the unquestioned authority of scientific advice? Or does, on the contrary, science need protection from too much democratic participation in technical decisions? Where Feyerabend's political relativism envisions democratic society as inherently pluralist and demands equal contribution of all traditions and worldviews to public decision-making, Collins and Evans hold a conception of elective modernism, defending the reality and value of technical expertise and arguing that science deserves a privileged status in modern democracies, because scientific values are also democratic values. I will argue that Feyerabend's political relativism provides a valuable framework for the evaluation of Collins' and Evans' theory of expertise. By constructing a dialog between Feyerabend and this more recent approach in Science and Technology Studies, the aim of this article is not only to show where the two positions differ and in what way they might be reconciled, but also how Feyerabend's philosophy provides substantial input to contemporary debate. Copyright © 2015 Elsevier Ltd. All rights reserved.

Error analysis and assessment of unsteady forces acting on a flapping wing micro air vehicle: free flight versus wind-tunnel experimental methods.

Science.gov (United States)

Caetano, J V; Percin, M; van Oudheusden, B W; Remes, B; de Wagter, C; de Croon, G C H E; de Visser, C C

2015-08-20

An accurate knowledge of the unsteady aerodynamic forces acting on a bio-inspired, flapping-wing micro air vehicle (FWMAV) is crucial in the design development and optimization cycle. Two different types of experimental approaches are often used: determination of forces from position data obtained from external optical tracking during free flight, or direct measurements of forces by attaching the FWMAV to a force transducer in a wind-tunnel. This study compares the quality of the forces obtained from both methods as applied to a 17.4 gram FWMAV capable of controlled flight. A comprehensive analysis of various error sources is performed. The effects of different factors, e.g., measurement errors, error propagation, numerical differentiation, filtering frequency selection, and structural eigenmode interference, are assessed. For the forces obtained from free flight experiments it is shown that a data acquisition frequency below 200 Hz and an accuracy in the position measurements lower than ± 0.2 mm may considerably hinder determination of the unsteady forces. In general, the force component parallel to the fuselage determined by the two methods compares well for identical flight conditions; however, a significant difference was observed for the forces along the stroke plane of the wings. This was found to originate from the restrictions applied by the clamp to the dynamic oscillations observed in free flight and from the structural resonance of the clamped FWMAV structure, which generates loads that cannot be distinguished from the external forces. Furthermore, the clamping position was found to have a pronounced influence on the eigenmodes of the structure, and this effect should be taken into account for accurate force measurements.
Single-sided sheet-to-tube spot welding investigated by 3D numerical simulations

DEFF Research Database (Denmark)

Nielsen, Chris Valentin; Chergui, Azeddine; Zhang, Wenqi

The single-sided resistance spot welding process is analyzed by a 3D numerical study of sheet-to-tube joining. Finite element simulations are carried out in SORPAS® 3D. Two levels of electrode force and five levels of welding current are simulated. The overall effects of changing current and force...
Transfer of fibroblast sheets cultured on thermoresponsive dishes with membranes.

Science.gov (United States)

Kawecki, Marek; Kraut, Małgorzata; Klama-Baryła, Agnieszka; Łabuś, Wojciech; Kitala, Diana; Nowak, Mariusz; Glik, Justyna; Sieroń, Aleksander L; Utrata-Wesołek, Alicja; Trzebicka, Barbara; Dworak, Andrzej; Szweda, Dawid

2016-06-01

In cell or tissue engineering, it is essential to develop a support for cell-to-cell adhesion, which leads to the generation of cell sheets connected by extracellular matrix. Such supports must be hydrophobic and should result in a detachable cell sheet. A thermoresponsive support that enables the cultured cell sheet to detach using only a change in temperature could be an interesting alternative in regenerative medicine. The aim of this study was to evaluate plates covered with thermoresponsive polymers as supports for the formation of fibroblast sheets and to develop a damage-free procedure for cell sheet transfer with the use of membranes as transfer tools. Human skin fibroblasts were seeded on supports coated with a thermoresponsive polymer: commercial UpCell™ dishes (NUNC™) coated with thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) and dishes coated with thermoresponsive poly(tri(ethylene glycol) monoethyl ether methacrylate) (P(TEGMA-EE)). Confluent fibroblast sheets were effectively cultured and harvested from both commercial PNIPAM-coated dishes and laboratory P(TEGMA-EE)-coated dishes. To transfer a detached cell sheet, two membranes, Immobilon-P(®) and SUPRATHEL(®), were examined. The use of SUPRATHEL for relocating the cell sheets opens a new possibility for the clinical treatment of wounds. This study established the background for implementing thermoresponsive supports for transplanting in vitro cultured fibroblasts.
Influence of Alcohol and Alcohol-free Mouthrinses on Force Degradation of Different Types of Space Closure Auxiliaries used in Sliding Mechanics

Directory of Open Access Journals (Sweden)

Vivek Mahajan

2014-01-01

Full Text Available Introduction: The objective of the study was to evaluate the percentage of force degradation of elastomeric chains, NiTi closed coil spring and stainless steel closed coil spring at different time intervals in different media. Materials and methods: Three types of space closing auxiliaries, such as elastomeric chains, NiTi closed coil springs and stainless steel coil springs immersed in artificial saliva, alcohol-free mouthrinse (Colgate plax and alcohol-containing mouthrinse (Listerine at time interval of 1, 4, 7,14, 21 and 28 days were divided into nine groups of 15 each: Group I- 15 polyurethane elastomeric chain immersed inside artificial saliva (Control. Group II-15 polyurethane elastomeric chain immersed inside alcohol-free mouthrinse. Group III- 15 polyurethane elastomeric chain immersed inside alcohol-containing mouthrinse. Group IV-15 stainless steel closed coil springs immersed inside artificial saliva (Control. Group V- 15 stainless steel closed coil springs immersed inside alcohol-free mouthrinse. Group VI-15 stainless steel closed coil springs immersed inside alcohol-containing mouthrinse. Group VII- 15 NiTi closed coil springs immersed inside artificial saliva (Control. Group VIII-15 nickel titanium closed coil springs immersed inside alcohol-free mouthrinse. Group IX- 15 NiTi closed coil springs immersed inside alcohol-containing mouthrinse. The percentage of force degradation was measured with the universal testing machine. Results: The force produced by elastomeric chain, stainless steel closed coil spring and NiTi closed coil spring at seven time intervals in artificial saliva, alcohol-free mouthwash and alcohol-containing mouthwash showed a statistically significant difference (p < 0.001. Conclusion: The force degradation in alcohol-containing mouthwash solution (Listerine is more as compared to alcohol-free mouthwash solution (Colgate plax .
A Teacher is Forever: The Legacy of Harry Kirke Wolfe (1858-1918).

Science.gov (United States)

Benjamin, Ludy T. Jr.

1987-01-01

This article traces the career of Harry Kirke Wolfe, Nebraska educator and one of the earliest U.S. psychologists to earn a doctorate in psychology from Wilhelm Wundt at Leipzig. Emphasis is placed on Wolfe's blending of psychology and pedagogy, and his qualities as a teacher. (Author/JDH)
Portraying the Protagonists: A Study of the Use of Adjectives in Harry Potter and the Deathly Hallows

OpenAIRE

Hishamuddin Salim; Nadia Nabila Saad

2016-01-01

The protagonists play important roles in any novel. In J.K. Rowling’s Harry Potter novels, they were presented in the most vivid of ways so as to make the characters alive and memorable. One of the strategies used by the author to make the protagonists so lively is through the use of adjectives. This study was conducted to find out the frequency of adjective that was used to describe three protagonists in the novel Harry Potter and the Deathly Hallows. These adjectives are then divided into...
Fans of Columbine shooters Eric Harris and Dylan Klebold

OpenAIRE

Andrew Ryan Rico

2015-01-01

On April 20, 1999, Eric Harris and Dylan Klebold murdered 12 students and one teacher at Columbine High School in Littleton, Colorado, in what was then the deadliest school shooting in American history. Despite causing a national panic and serving as a flash point for larger narratives on bullying, gun control, and media violence, both boys have gained active online fans. These fandoms dedicated to the Columbine shooters are widely referred to as dark examples of Internet communities, while t...
Label-Free Detection of Bacillus anthracis Spore Uptake in Macrophage Cells Using Analytical Optical Force Measurements.

Science.gov (United States)

Hebert, Colin G; Hart, Sean; Leski, Tomasz A; Terray, Alex; Lu, Qin

2017-10-03

Understanding the interaction between macrophage cells and Bacillus anthracis spores is of significant importance with respect to both anthrax disease progression, spore detection for biodefense, as well as understanding cell clearance in general. While most detection systems rely on specific molecules, such as nucleic acids or proteins and fluorescent labels to identify the target(s) of interest, label-free methods probe changes in intrinsic properties, such as size, refractive index, and morphology, for correlation with a particular biological event. Optical chromatography is a label free technique that uses the balance between optical and fluidic drag forces within a microfluidic channel to determine the optical force on cells or particles. Here we show an increase in the optical force experienced by RAW264.7 macrophage cells upon the uptake of both microparticles and B. anthracis Sterne 34F2 spores. In the case of spores, the exposure was detected in as little as 1 h without the use of antibodies or fluorescent labels of any kind. An increase in the optical force was also seen in macrophage cells treated with cytochalasin D, both with and without a subsequent exposure to spores, indicating that a portion of the increase in the optical force arises independent of phagocytosis. These results demonstrate the capability of optical chromatography to detect subtle biological differences in a rapid and sensitive manner and suggest future potential in a range of applications, including the detection of biological threat agents for biodefense and pathogens for the prevention of sepsis and other diseases.
The application of tailor-made force fields and molecular dynamics for NMR crystallography: a case study of free base cocaine

DEFF Research Database (Denmark)

Li, Xiaozhou; Neumann, Marcus A.; van de Streek, Jacco

2017-01-01

of a fully automatically generated tailor-made force field (TMFF) for the dynamic aspects of NMR crystallography is evaluated and compared with existing benchmarks, including static dispersion-corrected density functional theory calculations and the COMPASS force field. The crystal structure of free base...
Development of a low energy micro sheet forming machine

Science.gov (United States)

Razali, A. R.; Ann, C. T.; Shariff, H. M.; Kasim, N. I.; Musa, M. A.; Ahmad, A. F.

2017-10-01

It is expected that with the miniaturization of materials being processed, energy consumption is also being `miniaturized' proportionally. The focus of this study was to design a low energy micro-sheet-forming machine for thin sheet metal application and fabricate a low direct current powered micro-sheet-forming machine. A prototype of low energy system for a micro-sheet-forming machine which includes mechanical and electronic elements was developed. The machine was tested for its performance in terms of natural frequency, punching forces, punching speed and capability, energy consumption (single punch and frequency-time based). Based on the experiments, the machine can do 600 stroke per minute and the process is unaffected by the machine's natural frequency. It was also found that sub-Joule of power was required for a single stroke of punching/blanking process. Up to 100micron thick carbon steel shim was successfully tested and punched. It concludes that low power forming machine is feasible to be developed and be used to replace high powered machineries to form micro-products/parts.
Heat and mass transfer of Williamson nanofluid flow yield by an inclined Lorentz force over a nonlinear stretching sheet

Science.gov (United States)

Khan, Mair; Malik, M. Y.; Salahuddin, T.; Hussian, Arif.

2018-03-01

The present analysis is devoted to explore the computational solution of the problem addressing the variable viscosity and inclined Lorentz force effects on Williamson nanofluid over a stretching sheet. Variable viscosity is assumed to vary as a linear function of temperature. The basic mathematical modelled problem i.e. system of PDE's is converted nonlinear into ODE's via applying suitable transformations. Computational solutions of the problem is also achieved via efficient numerical technique shooting. Characteristics of controlling parameters i.e. stretching index, inclined angle, Hartmann number, Weissenberg number, variable viscosity parameter, mixed convention parameter, Brownian motion parameter, Prandtl number, Lewis number, thermophoresis parameter and chemical reactive species on concentration, temperature and velocity gradient. Additionally, friction factor coefficient, Nusselt number and Sherwood number are describe with the help of graphics as well as tables verses flow controlling parameters.
Research on the Effects of the Movable Die and its Counter Force on Sheet Hydroforming

International Nuclear Information System (INIS)

Zhou, Li X.; Zhang, Shi H.; Wang, Ben X.

2007-01-01

An improved Sheet Hydro-forming process was proposed, which was investigated in Institute of Metal Research, Chinese Academy of Sciences. ASAME system and FEM are used to analyze the forming process to explain some results that were found in the experiment. In the simulation, the effect of the movable die on the maximum principal stress is investigated in detail by using the FEM code LS-DYNA. For this case, the movable die changes the distribution of the maximum principal stress. For the sheet hydroforming without the movable die, the principal stress near the shoulder of the movable die arrives to the maximum value when t=0.0033s suddenly. But for the sheet hydroforming with the movable die, the maximum principal stress still lies in the die radius. The principal stress near the shoulder of the movable die is smaller. At the last stage contacting with the die, for the case without the movable die, the maximum principal stress near the shoulder of movable die is larger than that of the sheet hydroforming with the movable die. Moreover, the stress distribution near the shoulder of movable die for the case without the movable die is complicated. It is instable and very easy to occur wrinkling. The movable die delays the maximum thickness strain to the contacting die stage. So the formability of sheet metal can be remarkably improved by adopting the movable die. On a certain extent, the uniform distribution of thickness can be realized by increasing the counterforce of movable die. The minimum thickness reduction moves outside which is very helpful for the uniform thickness distribution. In this paper, two kinds of materials, soft steel and stainless steel, were investigated
A Novel Method of Modeling the Deformation Resistance for Clad Sheet

International Nuclear Information System (INIS)

Hu Jianliang; Yi Youping; Xie Mantang

2011-01-01

Because of the excellent thermal conductivity, the clad sheet (3003/4004/3003) of aluminum alloy is extensively used in various heat exchangers, such as radiator, motorcar air conditioning, evaporator, and so on. The deformation resistance model plays an important role in designing the process parameters of hot continuous rolling. However, the complex behaviors of the plastic deformation of the clad sheet make the modeling very difficult. In this work, a novel method for modeling the deformation resistance of clad sheet was proposed by combining the finite element analysis with experiments. The deformation resistance model of aluminum 3003 and 4004 was proposed through hot compression test on the Gleeble-1500 thermo-simulation machine. And the deformation resistance model of clad sheet was proposed through finite element analysis using DEFORM-2D software. The relationship between cladding ratio and the deformation resistance was discussed in detail. The results of hot compression simulation demonstrate that the cladding ratio has great effects on the resistance of the clad sheet. Taking the cladding ratio into consideration, the mathematical model of the deformation resistance for clad sheet has been proved to have perfect forecasting precision of different cladding ratio. Therefore, the presented model can be used to predict the rolling force of clad sheet during the hot continuous rolling process.
Theory of magnetostatic equilibria and applications in astrophysics

International Nuclear Information System (INIS)

Amari, T.

1988-04-01

Magnetohydrostatic equations are used to study the properties of magnetic configurations of astrophysical interest, particularly in solar physics. Results on force-free solutions with singularities (with current sheets) and on solutions which take into account current sheets and gravitational fields are obtained. A general method to construct an infinite class of non-y-symmetric models of protuberances when the magnetic field of the support is assumed to be potential is outlined. The general integral properties of current sheets of arbitrary geometry plunged into a nonlinear force-free magnetic field are established. It is shown that for a given mass, the equilibrium height of the protuberance increases with the shear of the force-free field. The case where the current sheet is reduced to a filament is examined. It is also shown that there exists a critical pressure beyond which no equilibrium is possible [fr
O ethos de Harry Potter a partir da trajetória do herói

Directory of Open Access Journals (Sweden)

Renato de Oliveira Dering

2012-11-01

Full Text Available Pretende-se com esse artigo perceber como se dá a relação do ethos do herói moderno com sua trajetória, observando as teorias de Maingueneau e Vogler, respectivamente. Para essa análise será visto o percurso do protagonista da série literária e fílmica Harry Potter, em especial, sua primeira obra, denominada Harry Potter e a pedra filosofal. Seguindo essas teorias mencionadas, todo herói, em sua maioria, carrega em sua história aspectos que podem ser facilmente identificados pelo leitor e são esses elementos que fazem com que esse leitor, também sujeito ativo no processo de interação com a obra, aceite a personagem, tal como ela se porta. A imagem que o sujeito passa e sua recepção é que permitirá seu aceite ou recusa. Deste modo, o ethos da personagem Harry Potter é preponderante para que cause a identificação do leitor com a obra, pois aquele já possui uma imagem pré-concebida do arquétipo do herói e torna plausível toda a trajetória que por ele será conquistada.
Water hammer experiences in the startup and early operation of the Shearon Harris plant

International Nuclear Information System (INIS)

Casada, D.A.

1987-01-01

During the course of preoperational testing and early operation of the Shearon Harris Nuclear Power Plant, several water hammer events have occurred. A description of the events and corrective/preventive measures taken are discussed
Transparent conductive-polymer strain sensors for touch input sheets of flexible displays

International Nuclear Information System (INIS)

Takamatsu, Seiichi; Takahata, Tomoyuki; Muraki, Masato; Iwase, Eiji; Matsumoto, Kiyoshi; Shimoyama, Isao

2010-01-01

A transparent conductive polymer-based strain-sensor array, designed especially for touch input sheets of flexible displays, was developed. A transparent conductive polymer, namely poly(3, 4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS), was utilized owing to its strength under repeated mechanical bending. PEDOT:PSS strain sensors with a thickness of 130 nm exhibited light transmittance of 92%, which is the same as the transmittance of ITO electrodes widely used in flat panel displays. We demonstrated that the sensor array on a flexible sheet was able to sustain mechanical bending 300 times at a bending radius of 5 mm. The strain sensor shows a gauge factor of 5.2. The touch point on a flexible sheet could be detected from histograms of the outputs of the strain sensors when the sheet was pushed with an input force of 5 N. The touch input could be detected on the flexible sheet with a curved surface (radius of curvature of 20 mm). These results show that the developed transparent conductive polymer-based strain-sensor array is applicable to touch input sheets of mechanically bendable displays.
Drawing and using free body diagrams: Why it may be better not to decompose forces

Directory of Open Access Journals (Sweden)

Ivica Aviani

2015-12-01

Full Text Available In this study we investigated how two different approaches to drawing free body diagrams influence the development of students’ understanding of Newton’s laws, including their ability to identify real forces. For this purpose we developed a 12-item two-tier multiple choice survey and conducted a quasiexperiment. This experiment included two groups of first-year physics students from Rijeka (RG (n_{e}=27 and Split (SG (n_{c}=25 Universities. Students from both groups solved mechanics problems for a period of two class hours. The only difference was that RG students used the superposition of forces approach to solving mechanics problems and in SG the decomposition of forces approach has been used. The ANCOVA (n_{c}=17, n_{e}=17 showed a statistically significant difference in favor of RG, whereby the effect sizes were moderate to large, and the largest differences have been observed in the ability of identifying real forces. Students from the control group (SG more often exhibited the misconception that forces and their components act on a body independently and simultaneously. Our results support the idea that the practice of resolving forces into the components may not be the most effective way to develop understanding of Newton’s laws and the concept of force.
Initial rigid response and softening transition of highly stretchable kirigami sheet materials.

Science.gov (United States)

Isobe, Midori; Okumura, Ko

2016-04-27

We study, experimentally and theoretically, the mechanical response of sheet materials on which line cracks or cuts are arranged in a simple pattern. Such sheet materials, often called kirigami (the Japanese words, kiri and gami, stand for cut and paper, respectively), demonstrate a unique mechanical response promising for various engineering applications such as stretchable batteries: kirigami sheets possess a mechanical regime in which sheets are highly stretchable and very soft compared with the original sheets without line cracks, by virtue of out-of-plane deformation. However, this regime starts after a transition from an initial stiff regime governed by in-plane deformation. In other words, the softness of the kirigami structure emerges as a result of a transition from the two-dimensional to three-dimensional deformation, i.e., from stretching to bending. We clarify the physical origins of the transition and mechanical regimes, which are revealed to be governed by simple scaling laws. The results could be useful for controlling and designing the mechanical response of sheet materials including cell sheets for medical regeneration and relevant to the development of materials with tunable stiffness and mechanical force sensors.
Detecting chameleons through Casimir force measurements

International Nuclear Information System (INIS)

Brax, Philippe; Bruck, Carsten van de; Davis, Anne-Christine; Shaw, Douglas; Mota, David F.

2007-01-01

The best laboratory constraints on strongly coupled chameleon fields come not from tests of gravity per se but from precision measurements of the Casimir force. The chameleonic force between two nearby bodies is more akin to a Casimir-like force than a gravitational one: The chameleon force behaves as an inverse power of the distance of separation between the surfaces of two bodies, just as the Casimir force does. Additionally, experimental tests of gravity often employ a thin metallic sheet to shield electrostatic forces; however, this sheet masks any detectable signal due to the presence of a strongly coupled chameleon field. As a result of this shielding, experiments that are designed to specifically test the behavior of gravity are often unable to place any constraint on chameleon fields with a strong coupling to matter. Casimir force measurements do not employ a physical electrostatic shield and as such are able to put tighter constraints on the properties of chameleons fields with a strong matter coupling than tests of gravity. Motivated by this, we perform a full investigation on the possibility of testing chameleon models with both present and future Casimir experiments. We find that present-day measurements are not able to detect the chameleon. However, future experiments have a strong possibility of detecting or rule out a whole class of chameleon models

Tomás Harris e a memória fraturada da América

Directory of Open Access Journals (Sweden)

Felipe Oliver

2013-06-01

Full Text Available Escrito durante la dictadura de Augusto Pinochet, Cipango[1992] pone en escena la alianza entre las escrituras oficiales y los intereses políticos de la ciudad letrada. En efecto, en su magnífico poemario Harris revisa no precisamente la historia sino cómo y bajo qué condiciones de poder se escribió el discurso sobre la fundación del Nuevo Mundo, detectando en la violencia y la tortura un vínculo entre la Conquista de la Indias y el reciente gobierno militar chileno. Así, a través de los silencios y la sistemática interrupción del verso, Harris “utiliza” al poemario como un instrumento para develar las fracturas del discurso histórico.
Influence of temperature fluctuations on equilibrium ice sheet volume

Science.gov (United States)

Bøgeholm Mikkelsen, Troels; Grinsted, Aslak; Ditlevsen, Peter

2018-01-01

Forecasting the future sea level relies on accurate modeling of the response of the Greenland and Antarctic ice sheets to changing temperatures. The surface mass balance (SMB) of the Greenland Ice Sheet (GrIS) has a nonlinear response to warming. Cold and warm anomalies of equal size do not cancel out and it is therefore important to consider the effect of interannual fluctuations in temperature. We find that the steady-state volume of an ice sheet is biased toward larger size if interannual temperature fluctuations are not taken into account in numerical modeling of the ice sheet. We illustrate this in a simple ice sheet model and find that the equilibrium ice volume is approximately 1 m SLE (meters sea level equivalent) smaller when the simple model is forced with fluctuating temperatures as opposed to a stable climate. It is therefore important to consider the effect of interannual temperature fluctuations when designing long experiments such as paleo-spin-ups. We show how the magnitude of the potential bias can be quantified statistically. For recent simulations of the Greenland Ice Sheet, we estimate the bias to be 30 Gt yr-1 (24-59 Gt yr-1, 95 % credibility) for a warming of 3 °C above preindustrial values, or 13 % (10-25, 95 % credibility) of the present-day rate of ice loss. Models of the Greenland Ice Sheet show a collapse threshold beyond which the ice sheet becomes unsustainable. The proximity of the threshold will be underestimated if temperature fluctuations are not taken into account. We estimate the bias to be 0.12 °C (0.10-0.18 °C, 95 % credibility) for a recent estimate of the threshold. In light of our findings it is important to gauge the extent to which this increased variability will influence the mass balance of the ice sheets.
Dielectric, Piezoelectric, and Vibration Properties of the LiF-Doped (Ba0.95Ca0.05(Ti0.93Sn0.07O3 Lead-Free Piezoceramic Sheets

Directory of Open Access Journals (Sweden)

Chien-Min Cheng

2018-01-01

Full Text Available By the conventional solid state reaction method, a small amount of lithium fluoride (LiF was used as the sintering promoter to improve the sintering and piezoelectric characteristics of (Ba0.95Ca0.05(Ti0.93Sn0.07O3 (BCTS lead-free piezoceramic sheets. Using X-ray diffraction (XRD and a scanning electron microscope (SEM, the inferences of the crystalline and surface microstructures were obtained and analyzed. Then, the impedance analyzer and d33-meter were used to measure the dielectric and piezoelectric characteristics. In this study, the optimum sintering temperature of the BCTS sheets decreased from 1450 °C to 1390 °C due to LiF doping. For the 0.07 wt % LiF-doped BCTS sheets sintered at 1390 °C, the piezoelectric constant (d33 is 413 pC/N, the electric–mechanical coupling coefficient (kp is 47.5%, the dielectric loss (tan δ is 3.9%, and the dielectric constant (εr is 8100, which are all close to or even better than that of the pure undoped BCTS ceramics. The Curie temperature also improved, from 85 °C for pure BCTS to 140 °C for BCTS–0.07 LiF sheets. Furthermore, by using the vibration system and fixing 1.5 g tip mass at the end of the sheets, as the vibration frequency is 20 Hz, the proposed piezoelectric ceramic sheets also reveal a good energy harvesting performance at the maximum output peak voltage of 4.6 V, which is large enough and can be applied in modern low-power electronic products.
Inter- and intra-examiner reliability of footprint pattern analysis obtained from diabetics using the Harris mat.

Science.gov (United States)

Cisneros, Lígia de Loiola; Fonseca, Tiago H S; Abreu, Vivianni C

2010-01-01

High plantar pressure is a proven risk factor for ulceration among individuals with diabetes mellitus. The Harris and Beath footprinting mat is one of the tools used in screening for foot ulceration risk among these subjects. There are no reports in the literature on the reliability of footprint analysis using print pattern criteria. The aim of this study was to evaluate the inter- and intra-examiner reliability of the analysis of footprint patterns obtained using the Harris and Beath footprinting mat. Footprints were taken from 41 subjects using the footprinting mat. The images were subjected to analysis by three independent examiners. To investigate the intra-examiner reliability, the analysis was repeated by one of the examiners one week later. The weighted kappa coefficient was excellent (K(w) > 0.80) for the inter- and intra-examiner analyses for most of the points studied on both feet. The criteria for analyzing footprint patterns obtained using the Harris and Beath footprinting mat presented good reliability and high to excellent inter- and intra-examiner agreement. This method is reliable for analyses involving one or more examiners. Article registered in the Australian New Zealand Clinical Trials Registry (ANZCTR) under the number ACTRN12609000693224.
A not-so-new eugenics. Harris and Savulescu on human enhancement.

Science.gov (United States)

Sparrow, Robert

2011-01-01

John Harris and Julian Savulescu, leading figures in the "new' eugenics, argue that parents are morally obligated to use genetic and other technologies to enhance their children. But the argument they give leads to conclusions even more radical than they acknowledge. Ultimately, the world it would lead to is not all that different from that championed by eugenicists one hundred years ago.
Uncertainties in the Antarctic Ice Sheet Contribution to Sea Level Rise: Exploration of Model Response to Errors in Climate Forcing, Boundary Conditions, and Internal Parameters

Science.gov (United States)

Schlegel, N.; Seroussi, H. L.; Boening, C.; Larour, E. Y.; Limonadi, D.; Schodlok, M.; Watkins, M. M.

2017-12-01

The Jet Propulsion Laboratory-University of California at Irvine Ice Sheet System Model (ISSM) is a thermo-mechanical 2D/3D parallelized finite element software used to physically model the continental-scale flow of ice at high resolutions. Embedded into ISSM are uncertainty quantification (UQ) tools, based on the Design Analysis Kit for Optimization and Terascale Applications (DAKOTA) software. ISSM-DAKOTA offers various UQ methods for the investigation of how errors in model input impact uncertainty in simulation results. We utilize these tools to regionally sample model input and key parameters, based on specified bounds of uncertainty, and run a suite of continental-scale 100-year ISSM forward simulations of the Antarctic Ice Sheet. Resulting diagnostics (e.g., spread in local mass flux and regional mass balance) inform our conclusion about which parameters and/or forcing has the greatest impact on century-scale model simulations of ice sheet evolution. The results allow us to prioritize the key datasets and measurements that are critical for the minimization of ice sheet model uncertainty. Overall, we find that Antartica's total sea level contribution is strongly affected by grounding line retreat, which is driven by the magnitude of ice shelf basal melt rates and by errors in bedrock topography. In addition, results suggest that after 100 years of simulation, Thwaites glacier is the most significant source of model uncertainty, and its drainage basin has the largest potential for future sea level contribution. This work is performed at and supported by the California Institute of Technology's Jet Propulsion Laboratory. Supercomputing time is also supported through a contract with the National Aeronautics and Space Administration's Cryosphere program.
Drawing and Using Free Body Diagrams: Why It May Be Better Not to Decompose Forces

Science.gov (United States)

Aviani, Ivica; Erceg, Nataša; Mešic, Vanes

2015-01-01

In this study we investigated how two different approaches to drawing free body diagrams influence the development of students' understanding of Newton's laws, including their ability to identify real forces. For this purpose we developed a 12-item two-tier multiple choice survey and conducted a quasiexperiment. This experiment included two groups…
Ice shelf fracture parameterization in an ice sheet model

Science.gov (United States)

Sun, Sainan; Cornford, Stephen L.; Moore, John C.; Gladstone, Rupert; Zhao, Liyun

2017-11-01

Floating ice shelves exert a stabilizing force onto the inland ice sheet. However, this buttressing effect is diminished by the fracture process, which on large scales effectively softens the ice, accelerating its flow, increasing calving, and potentially leading to ice shelf breakup. We add a continuum damage model (CDM) to the BISICLES ice sheet model, which is intended to model the localized opening of crevasses under stress, the transport of those crevasses through the ice sheet, and the coupling between crevasse depth and the ice flow field and to carry out idealized numerical experiments examining the broad impact on large-scale ice sheet and shelf dynamics. In each case we see a complex pattern of damage evolve over time, with an eventual loss of buttressing approximately equivalent to halving the thickness of the ice shelf. We find that it is possible to achieve a similar ice flow pattern using a simple rule of thumb: introducing an enhancement factor ˜ 10 everywhere in the model domain. However, spatially varying damage (or equivalently, enhancement factor) fields set at the start of prognostic calculations to match velocity observations, as is widely done in ice sheet simulations, ought to evolve in time, or grounding line retreat can be slowed by an order of magnitude.
Possible contribution of ice-sheet/lithosphere interactions to past glaciological changes in Greenland

Science.gov (United States)

Alley, R. B.; Parizek, B. R.; Anandakrishnan, S.; Pollard, D.; Stevens, N. T.; Pourpoint, M.

2017-12-01

Ice-lithosphere interactions may have influenced the history of ice-sheet sensitivity to climate change. The Greenland ice sheet (GIS) is sensitive to warming, and is likely to be largely removed if subjected to relatively small additional temperature increases. The recent report (Schaefer et al., 2016, Nature) of near-complete GIS removal under modest Pleistocene forcing suggests that GIS sensitivity may be even greater than generally modeled, but lack of major Holocene retreat is more consistent with existing models. As shown by Stevens et al. (2016, JGR), peak lithospheric flexural stresses associated with ice-age GIS cycling are of the same order as dike-driving stresses in plutonic systems, and migrate over ice-age cycles. The full analysis by Stevens et al. suggests the possibility that the onset of cyclic ice-sheet loading allowed deep melt associated with the passage of the Icelandic hot spot beneath Greenland to work up though the crust to or near the base of the ice sheet, helping explain the anomalous geothermal heat fluxes observed at the head of the Northeast Greenland Ice Stream and elsewhere in the northern part of GIS. If ice-age cycling aided extraction of an existing reservoir of melted rock, then geothermal heat flux would have risen with the onset of extraction and migration, but with a subsequent fall associated with reservoir depletion. Simple parameterized flow-model simulations confirm intuition that a higher geothermal flux makes deglaciation easier, with the northern part of the ice sheet especially important. Large uncertainties remain in quantification, but we suggest the hypothesis that, following the onset of ice-age cycling, deglaciation of the GIS first became easier and then more difficult in response to feedbacks involving the ice sheet and the geological system beneath. In turn, this suggests that evidence of past deglaciation under moderate forcing is consistent with existing ice-sheet models.
Two-fluid model of the pulsar magnetosphere represented as an axisymmetric force-free dipole

Energy Technology Data Exchange (ETDEWEB)

Petrova, S.A., E-mail: petrova@rian.kharkov.ua [Institute of Radio Astronomy of the NAS of Ukraine, Mystetstv Str., 4, Kharkiv 61002 (Ukraine)

2017-05-01

Based on the exact dipolar solution of the pulsar equation the self-consistent two-fluid model of the pulsar magnetosphere is developed. We concentrate on the low-mass limit of the model, taking into account the radiation damping. As a result, we obtain the particle distributions sustaining the dipolar force-free configuration of the pulsar magnetosphere in case of a slight velocity shear of the electron and positron components. Over most part of the force-free region, the particles follow the poloidal magnetic field lines, with the azimuthal velocities being small. Close to the Y-point, however, the particle motion is chiefly azimuthal and the Lorentz-factor grows unrestrictedly. This may result in the very-high-energy emission from the vicinity of the Y-point and may also imply the magnetocentrifugal formation of a jet. As for the first-order quantities, the longitudinal accelerating electric field is found to change the sign, hinting at coexistence of the polar and outer gaps. Besides that, the components of the plasma conductivity tensor are derived and the low-mass analogue of the pulsar equation is formulated as well.
Phonon dispersions in graphene sheet and single-walled carbon ...

Indian Academy of Sciences (India)

Abstract. In the present research paper, phonons in graphene sheet have been calculated by con- structing a dynamical matrix using the force constants derived from the second-generation reactive empirical bond order potential by Brenner and co-workers. Our results are comparable to inelastic. X-ray scattering as well as ...
DOS MIRADAS A LA GUERRA EN LA POESÍA DE TOMÁS HARRIS

Directory of Open Access Journals (Sweden)

Mary Mac-Millan

2009-11-01

Full Text Available El presente trabajo se centra en el acontecimiento traumático de la guerra, la posibilidad del sujeto de realizar una experiencia y sostenerse en cuanto tal, pese a la anulación que recae sobre él. El análisis se lleva a cabo en dos poemarios del poeta chileno Tomás Harris: "Encuentros al fin de la batalla" (de Encuentros con hombres oscuros y "Balada del soldado de Oklahoma" (de Tridente. Ambos poemarios entran en diálogo y choque, puesto que uno aborda la Segunda Guerra Mundial y el segundo la guerra mediática del Golfo. La poesía pone a prueba sus propias posibilidades y nos muestra un sujeto que oscila entre el duelo y la melancolía y que se niega a ser reducido a un mero espectador pasivo.This article aims at exploring the possibility of surviving and realizing an experience from the traumatic event of war. The analysis is focused on two works by the Chilean poet Tomás Harris: "Encuentros al fin de la batalla" of Encuentros con hombres oscuros and "Balada del soldado de Oklahoma " of Tridente. Both poems are related to the issue of war trauma: in the first work, it approaches World War II and the second, the mediatic Gulf War Thus, the poetry of Harris questions its own limits by means of a subject who oscillates between mourning and melancholy and rejects to be reduced to a mere passive spectator
Force Balance and Substorm Effects in the Magnetotail

Science.gov (United States)

Kaufmann, Richard L.; Larson, Douglas J.; Kontodinas, Ioannis D.; Ball, Bryan M.

1997-01-01

A model of the quiet time middle magnetotail is developed using a consistent orbit tracing technique. The momentum equation is used to calculate geocentric solar magnetospheric components of the particle and electromagnetic forces throughout the current sheet. Ions generate the dominant x and z force components. Electron and ion forces almost cancel in the y direction because the two species drift earthward at comparable speeds. The force viewpoint is applied to a study of some substorm processes. Generation of the rapid flows seen during substorm injection and bursty bulk flow events implies substantial force imbalances. The formation of a substorm diversion loop is one cause of changes in the magnetic field and therefore in the electromagnetic force. It is found that larger forces are produced when the cross-tail current is diverted to the ionosphere than would be produced if the entire tail current system simply decreased. Plasma is accelerated while the forces are unbalanced resulting in field lines within a diversion loop becoming more dipolar. Field lines become more stretched and the plasma sheet becomes thinner outside a diversion loop. Mechanisms that require thin current sheets to produce current disruption then can create additional diversion loops in the newly thinned regions. This process may be important during multiple expansion substorms and in differentiating pseudoexpansions from full substorms. It is found that the tail field model used here can be generated by a variety of particle distribution functions. However, for a given energy distribution the mixture of particle mirror or reflection points is constrained by the consistency requirement. The study of uniqueness also leads to the development of a technique to select guiding center electrons that will produce charge neutrality all along a flux tube containing nonguiding center ions without the imposition of a parallel electric field.
West Nile Virus Outbreak in Houston and Harris County, Texas, USA, 2014.

Science.gov (United States)

Martinez, Diana; Murray, Kristy O; Reyna, Martin; Arafat, Raouf R; Gorena, Roberto; Shah, Umair A; Debboun, Mustapha

2017-08-01

Since 2002, West Nile virus (WNV) has been detected every year in Houston and the surrounding Harris County, Texas. In 2014, the largest WNV outbreak to date occurred, comprising 139 cases and causing 2 deaths. Additionally, 1,286 WNV-positive mosquito pools were confirmed, the most reported in a single mosquito season.
Empathizing with Harry Potter: The Use of Popular Literature in Counselor Education

Science.gov (United States)

Gibson, Donna M.

2007-01-01

In this article, the popular children's book Harry Potter and the Sorcerer's Stone (J. K. Rowling, 1997) is discussed as the basis for an activity in teaching and eliciting empathy from beginning-level school counseling students. A description of the application of the book to this activity, the students' evaluations, and teaching recommendations…
Euhofa International president ja peasekretär Eestis / Filiep Defraye, Harry de Bruijn

Index Scriptorium Estoniae

Defraye, Filiep

2010-01-01

Intervjuu 13.-15. aprillil Eestit külastanud maailma juhtivate hotelli- ja turismikoolide organisatsiooni Euhofa International presidendi Filiep Defraye ja peasekretäri Harry de Bruijn´iga, kes tutvusid Pärnu kolledži ja EHTE valmisolekuga organisatsiooni 50. kongressi korraldamiseks 2011. aastal
ON ESTIMATING FORCE-FREENESS BASED ON OBSERVED MAGNETOGRAMS

International Nuclear Information System (INIS)

Zhang, X. M.; Zhang, M.; Su, J. T.

2017-01-01

It is a common practice in the solar physics community to test whether or not measured photospheric or chromospheric vector magnetograms are force-free, using the Maxwell stress as a measure. Some previous studies have suggested that magnetic fields of active regions in the solar chromosphere are close to being force-free whereas there is no consistency among previous studies on whether magnetic fields of active regions in the solar photosphere are force-free or not. Here we use three kinds of representative magnetic fields (analytical force-free solutions, modeled solar-like force-free fields, and observed non-force-free fields) to discuss how measurement issues such as limited field of view (FOV), instrument sensitivity, and measurement error could affect the estimation of force-freeness based on observed magnetograms. Unlike previous studies that focus on discussing the effect of limited FOV or instrument sensitivity, our calculation shows that just measurement error alone can significantly influence the results of estimates of force-freeness, due to the fact that measurement errors in horizontal magnetic fields are usually ten times larger than those in vertical fields. This property of measurement errors, interacting with the particular form of a formula for estimating force-freeness, would result in wrong judgments of the force-freeness: a truly force-free field may be mistakenly estimated as being non-force-free and a truly non-force-free field may be estimated as being force-free. Our analysis calls for caution when interpreting estimates of force-freeness based on measured magnetograms, and also suggests that the true photospheric magnetic field may be further away from being force-free than it currently appears to be.
A Pragmatic and Empirical Approach to Free Will

Directory of Open Access Journals (Sweden)

Andrea Lavazza

2017-12-01

Full Text Available The long dispute between incompatibilists (namely, the advocates of the contemporary version of the illusory nature of freedom and compatibilists is further exemplified in the discussion between Sam Harris and Daniel Dennett. In this article I try to add to the discussion by outlining a concept of free will linked to five operating conditions and proposing its operationalization and quantification. The idea is to empirically and pragmatically define free will as we need it for moral blame and legal liability, while separating it from the debate on global determinism, local determinism, automatisms and priming phenomena on a psychological level. This is made possible by weakening the claims of determinisms and psychological automatisms, based on the latest research, and by giving a well-outlined definition of free will as I want to defend it.
Quantum fictitious forces

DEFF Research Database (Denmark)

Bialynicki-Birula, I; Cirone, M.A.; Dahl, Jens Peder

2002-01-01

We present Heisenberg's equation of motion for the radial variable of a free non-relativistic particle in D dimensions. The resulting radial force consists of three contributions: (i) the quantum fictitious force which is either attractive or repulsive depending on the number of dimensions, (ii......) a singular quantum force located at the origin, and (iii) the centrifugal force associated with non-vanishing angular momentum. Moreover, we use Heisenberg's uncertainty relation to introduce a lower bound for the kinetic energy of an ensemble of neutral particles. This bound is quadratic in the number...... of atoms and can be traced back to the repulsive quantum fictitious potential. All three forces arise for a free particle: "Force without force"....
Mirage effect from thermally modulated transparent carbon nanotube sheets.

Science.gov (United States)

Aliev, Ali E; Gartstein, Yuri N; Baughman, Ray H

2011-10-28

The single-beam mirage effect, also known as photothermal deflection, is studied using a free-standing, highly aligned carbon nanotube aerogel sheet as the heat source. The extremely low thermal capacitance and high heat transfer ability of these transparent forest-drawn carbon nanotube sheets enables high frequency modulation of sheet temperature over an enormous temperature range, thereby providing a sharp, rapidly changing gradient of refractive index in the surrounding liquid or gas. The advantages of temperature modulation using carbon nanotube sheets are multiple: in inert gases the temperature can reach > 2500 K; the obtained frequency range for photothermal modulation is ~100 kHz in gases and over 100 Hz in high refractive index liquids; and the heat source is transparent for optical and acoustical waves. Unlike for conventional heat sources for photothermal deflection, the intensity and phase of the thermally modulated beam component linearly depends upon the beam-to-sheet separation over a wide range of distances. This aspect enables convenient measurements of accurate values for thermal diffusivity and the temperature dependence of refractive index for both liquids and gases. The remarkable performance of nanotube sheets suggests possible applications as photo-deflectors and for switchable invisibility cloaks, and provides useful insights into their use as thermoacoustic projectors and sonar. Visibility cloaking is demonstrated in a liquid.

Simplified model for a ventilated glass window under forced air flow conditions

International Nuclear Information System (INIS)

Ismail, K.A.R.; Henriquez, J.R.

2006-01-01

This paper presents a study on a ventilated window composed of two glass sheets separated by a spacing through which air is forced to flow. The proposed model is one dimensional and unsteady based upon global energy balance over the glass sheets and the flowing fluid. The external glass sheet of the cavity is subjected to variable heat flow due to the solar radiation as well as variable external ambient temperature. The exchange of radiation energy (infrared radiation) between the glass sheets is also included in the formulation. Effects of the spacing between the glass sheets, variation of the forced mass flow rate on the total heat gain and the shading coefficients are investigated. The results show that the effect of the increase of the mass flow rate is found to reduce the mean solar heat gain and the shading coefficients while the increase of the fluid entry temperature is found to deteriorate the window thermal performance
Simplified model for a ventilated glass window under forced air flow conditions

Energy Technology Data Exchange (ETDEWEB)

Ismail, K.A.R. [Depto. de Engenharia Termica e de Fluidos-FEM-UNICAMP CP: 6122 CEP 13083-970 Campinas, SP (Brazil); Henriquez, J.R. [Depto. de Eng. Mecanica-DEMEC, UFPE Av. Academico Helio Ramos, S/N CEP 50740-530, Recife, PE (Brazil)

2006-02-01

This paper presents a study on a ventilated window composed of two glass sheets separated by a spacing through which air is forced to flow. The proposed model is one dimensional and unsteady based upon global energy balance over the glass sheets and the flowing fluid. The external glass sheet of the cavity is subjected to variable heat flow due to the solar radiation as well as variable external ambient temperature. The exchange of radiation energy (infrared radiation) between the glass sheets is also included in the formulation. Effects of the spacing between the glass sheets, variation of the forced mass flow rate on the total heat gain and the shading coefficients are investigated. The results show that the effect of the increase of the mass flow rate is found to reduce the mean solar heat gain and the shading coefficients while the increase of the fluid entry temperature is found to deteriorate the window thermal performance. (author)
Kirit C. Shah, M.D. v. Stan Harris and Nancy Harris. "Construction of Legal Arguments, Statutes of Limitations, and Medical Malpractice." Lesson Plans for Secondary Teachers on How Lawyers Prepare Their Arguments. Courts in the Classroom: Curriculum Concepts and Other Information on Indiana's Courts for the K-12 Educator.

Science.gov (United States)

Osborn, Elizabeth

Stan and Nancy Harris filed a complaint against Kirit C. Shah, M.D., for misdiagnosing Mr. Harris's illness, charging Dr. Shah with negligence and asking for damages. A medical malpractice action in Indiana is governed by a two year statute of limitations. Because the Harrises failed to bring their action against Dr. Shah within this two year…
"Something He Could Do without Being Taught": Honors, Play, and "Harry Potter"

Science.gov (United States)

Yager, Susan

2015-01-01

Years after the publication of its seventh and final volume in 2007 and the completion of the film series in 2011, the "Harry Potter" series is still studied and cited by professionals in fields ranging from science and economics to law and theology (for recent examples see Gierzynski and Eddy; Reagin; Bassham). Its continuing popularity…
Lessons in the Teaching of Vocabulary from September 11 and Harry Potter.

Science.gov (United States)

Nilsen, Alleen Pace; Nilsen, Don L. F.

2002-01-01

Considers that the comparison between children's success in learning new names in the Harry Potter books versus the relative failure of adults to learn new names connected to the September 11th attacks provides a real-world situation from which principles can be deduced to help educators succeed in teaching vocabulary lessons. Offers classroom…
Precisely Assembled Nanofiber Arrays as a Platform to Engineer Aligned Cell Sheets for Biofabrication

Directory of Open Access Journals (Sweden)

Vince Beachley

2014-08-01

Full Text Available A hybrid cell sheet engineering approach was developed using ultra-thin nanofiber arrays to host the formation of composite nanofiber/cell sheets. It was found that confluent aligned cell sheets could grow on uniaxially-aligned and crisscrossed nanofiber arrays with extremely low fiber densities. The porosity of the nanofiber sheets was sufficient to allow aligned linear myotube formation from differentiated myoblasts on both sides of the nanofiber sheets, in spite of single-side cell seeding. The nanofiber content of the composite cell sheets is minimized to reduce the hindrance to cell migration, cell-cell contacts, mass transport, as well as the foreign body response or inflammatory response associated with the biomaterial. Even at extremely low densities, the nanofiber component significantly enhanced the stability and mechanical properties of the composite cell sheets. In addition, the aligned nanofiber arrays imparted excellent handling properties to the composite cell sheets, which allowed easy processing into more complex, thick 3D structures of higher hierarchy. Aligned nanofiber array-based composite cell sheet engineering combines several advantages of material-free cell sheet engineering and polymer scaffold-based cell sheet engineering; and it represents a new direction in aligned cell sheet engineering for a multitude of tissue engineering applications.
‘Snapewives’ and ‘Snapeism’: A Fiction-Based Religion within the Harry Potter Fandom

Directory of Open Access Journals (Sweden)

Zoe Alderton

2014-03-01

Full Text Available The book and film franchise of Harry Potter has inspired a monumental fandom community with a veracious output of fanfiction and general musings on the text and the vivid universe contained therein. A significant portion of these texts deal with Professor Severus Snape, the stern Potions Master with ambiguous ethics and loyalties. This paper explores a small community of Snape fans who have gone beyond a narrative retelling of the character as constrained by the work of Joanne Katherine Rowling. The ‘Snapewives’ or ‘Snapists’ are women who channel Snape, are engaged in romantic relationships with him, and see him as a vital guide for their daily lives. In this context, Snape is viewed as more than a mere fictional creation. He is seen as a being that extends beyond the Harry Potter texts with Rowling perceived as a flawed interpreter of his supra-textual essence. While a Snape religion may be seen as the extreme end of the Harry Potter fandom, I argue that religions of this nature are not uncommon, unreasonable, or unprecedented. Popular films are a mechanism for communal bonding, individual identity building, and often contain their own metaphysical discourses. Here, I plan to outline the manner in which these elements resolve within extreme Snape fandom so as to propose a nuanced model for the analysis of fandom-inspired religion without the use of unwarranted veracity claims.
An efficient regional energy-moisture balance model for simulation of the Greenland Ice Sheet response to climate change

Directory of Open Access Journals (Sweden)

A. Robinson

2010-04-01

Full Text Available In order to explore the response of the Greenland ice sheet (GIS to climate change on long (centennial to multi-millennial time scales, a regional energy-moisture balance model has been developed. This model simulates seasonal variations of temperature and precipitation over Greenland and explicitly accounts for elevation and albedo feedbacks. From these fields, the annual mean surface temperature and surface mass balance can be determined and used to force an ice sheet model. The melt component of the surface mass balance is computed here using both a positive degree day approach and a more physically-based alternative that includes insolation and albedo explicitly. As a validation of the climate model, we first simulated temperature and precipitation over Greenland for the prescribed, present-day topography. Our simulated climatology compares well to observations and does not differ significantly from that of a simple parameterization used in many previous simulations. Furthermore, the calculated surface mass balance using both melt schemes falls within the range of recent regional climate model results. For a prescribed, ice-free state, the differences in simulated climatology between the regional energy-moisture balance model and the simple parameterization become significant, with our model showing much stronger summer warming. When coupled to a three-dimensional ice sheet model and initialized with present-day conditions, the two melt schemes both allow realistic simulations of the present-day GIS.
Decontamination sheet

International Nuclear Information System (INIS)

Hirose, Emiko; Kanesaki, Ken.

1995-01-01

The decontamination sheet of the present invention is formed by applying an adhesive on one surface of a polymer sheet and releasably appending a plurality of curing sheets. In addition, perforated lines are formed on the sheet, and a decontaminating agent is incorporated in the adhesive. This can reduce the number of curing operation steps when a plurality steps of operations for radiation decontamination equipments are performed, and further, the amount of wastes of the cured sheets, and operator's exposure are reduced, as well as an efficiency of the curing operation can be improved, and propagation of contamination can be prevented. (T.M.)
The force-free magnetosphere of a rotating black hole

Directory of Open Access Journals (Sweden)

Contopoulos Ioannis

2013-12-01

Full Text Available We explore the analogy with pulsars and investigate the structure of the force-free magnetosphere around a Kerr black hole. We propose that the source of the black hole magnetic field is the Poynting-Robertson effect on the plasma electrons at the inner edge of the surrounding accretion disk, the so called Cosmic Battery. The magnetospheric solution is characterized by the distributions of the magnetic field angular velocity and the poloidal electric current. These are not arbitrary. They are determined self-consistently by requiring that magnetic field lines cross smoothly the two singular surfaces of the problem, the inner ‘light surface’ located inside the ergosphere, and the outer ‘light surface’ which is the generalization of the pulsar light cylinder. The black hole forms a relativistic jet only if it is surrounded by a thick disk and/or extended disk outflows.
ACCIO FANDOM: Harry Potter – de livros para a história transmídia com o engajamento dos fãs.

Directory of Open Access Journals (Sweden)

Gabriela Gruszynski Sanseverino

2016-09-01

Full Text Available Harry Potter é uma história transmídia (JENKINS, 2009a, que se estabeleceu concomitantemente por um esforço da marca e pela demanda dos fãs. O fandom de Harry Potter é notadamente ativo e, neste artigo, volta-se para como estes fãs se inseriram – e continuam a participar – do processo de transmidialização da história criada por J.K. Rowling. A franquia que começou com sete livros se expandiu para múltiplas plataformas, foi pensada neste trabalho a partir dos sete princípios delineados por Jenkins (2009a para analisar as narrativas transmídia. Com base na pesquisa bibliográfica e na documental, a análise da Harry Potter como franquia transmídia possibilitou que demarcássemos a participação ativa do fandom de Harry Potter como essencial para o desenvolvimento da série de livros em uma narrativa presente em múltiplas plataformas.
Identification of high school students' ability level of constructing free body diagrams to solve restricted and structured response items in force matter

Science.gov (United States)

Rahmaniar, Andinisa; Rusnayati, Heni; Sutiadi, Asep

2017-05-01

While solving physics problem particularly in force matter, it is needed to have the ability of constructing free body diagrams which can help students to analyse every force which acts on an object, the length of its vector and the naming of its force. Mix method was used to explain the result without any special treatment to participants. The participants were high school students in first grade totals 35 students. The purpose of this study is to identify students' ability level of constructing free body diagrams in solving restricted and structured response items. Considering of two types of test, every student would be classified into four levels ability of constructing free body diagrams which is every level has different characteristic and some students were interviewed while solving test in order to know how students solve the problem. The result showed students' ability of constructing free body diagrams on restricted response items about 34.86% included in no evidence of level, 24.11% inadequate level, 29.14% needs improvement level and 4.0% adequate level. On structured response items is about 16.59% included no evidence of level, 23.99% inadequate level, 36% needs improvement level, and 13.71% adequate level. Researcher found that students who constructed free body diagrams first and constructed free body diagrams correctly were more successful in solving restricted and structured response items.
Development of the spare parts program at Shearon Harris

International Nuclear Information System (INIS)

Roberts, A.J.

1987-01-01

Throughout construction, testing, and commercial operation of a nuclear power plant, utilities have a need for spare parts and consumables that must meet a wide range of technical and quality assurance (QA) requirements. The applications for which parts and consumables may be used need to be identified prior to procurement to ensure that the design basis of the plant is not compromised. The spare parts program at Shearon Harris nuclear power plant supported the maintenance department with the proper parts when needed for all but 5% of the maintenance work requests
"Cultural acupuncture": Fan activism and the Harry Potter Alliance

Directory of Open Access Journals (Sweden)

Henry Jenkins

2012-06-01

Full Text Available Fan activists have struggled to defend series from cancellation, defend themselves from cease and desist orders, promote alternative representations, and raise money for charity. Building on this background, this article examines how the Harry Potter Alliance encourages young people to speak out as fans on a broad range of human rights and social justice issues through what the group's leader, Andrew Slack, calls "cultural acupuncture." The group's practice of mapping the fictional content world onto real-world concerns helps empower young people to become civicly engaged and politically active.
Growth and wall-transpiration control of nonlinear unsteady Görtler vortices forced by free-stream vortical disturbances

Science.gov (United States)

Marensi, Elena; Ricco, Pierre

2017-11-01

The generation, nonlinear evolution, and wall-transpiration control of unsteady Görtler vortices in an incompressible boundary layer over a concave plate is studied theoretically and numerically. Görtler rolls are initiated and driven by free-stream vortical perturbations of which only the low-frequency components are considered because they penetrate the most into the boundary layer. The formation and development of the disturbances are governed by the nonlinear unsteady boundary-region equations with the centrifugal force included. These equations are subject to appropriate initial and outer boundary conditions, which account for the influence of the upstream and free-stream forcing in a rigorous and mutually consistent manner. Numerical solutions show that the stabilizing effect on nonlinearity, which also occurs in flat-plate boundary layers, is significantly enhanced in the presence of centrifugal forces. Sufficiently downstream, the nonlinear vortices excited at different free-stream turbulence intensities Tu saturate at the same level, proving that the initial amplitude of the forcing becomes unimportant. At low Tu, the disturbance exhibits a quasi-exponential growth with the growth rate being intensified for more curved plates and for lower frequencies. At higher Tu, in the typical range of turbomachinery applications, the Görtler vortices do not undergo a modal stage as nonlinearity saturates rapidly, and the wall curvature does not affect the boundary-layer response. Good quantitative agreement with data from direct numerical simulations and experiments is obtained. Steady spanwise-uniform and spanwise-modulated zero-mass-flow-rate wall transpiration is shown to attenuate the growth of the Görtler vortices significantly. A novel modified version of the Fukagata-Iwamoto-Kasagi identity, used for the first time to study a transitional flow, reveals which terms in the streamwise momentum balance are mostly affected by the wall transpiration, thus
Theorizing a public engagement keystone: Seeing fandom's integral connection to civic engagement through the case of the Harry Potter Alliance

Directory of Open Access Journals (Sweden)

Ashley Hinck

2012-06-01

Full Text Available The Harry Potter Alliance (HPA has invited thousands of Harry Potter fans to view politics and activism through the lens of Harry Potter. HPA members have signed petitions, sent letters, made videos, and raised money in efforts to affect laws and public policies. These activities circulate and operate within the public sphere through an engagement with others. If we are to consider the political actions of fans, we must consider how fans insert arguments into the public sphere, constitute publics, and ultimately assert their own public subjectivities. By drawing on social movement and public sphere theory, I first develop the theoretical concept of the "public engagement keystone." I conceptualize the public engagement keystone as a touch point, worldview, or philosophy that makes other people, actions, and institutions intelligible. Next, I use the case of the HPA to demonstrate how the Harry Potter story operates as a public engagement keystone, opening the door to public subjectivities on par with the healthy public formation of John Dewey, Doug McAdam, or Peter Dahlgren. I offer an interdisciplinary approach to how fandom encourages and invites civic engagement. By doing so, public sphere theory can better account for a wider variety of types of civic engagement, including fandom activism.
Combined influence of radiation absorption and Hall current effects on MHD double-diffusive free convective flow past a stretching sheet

Directory of Open Access Journals (Sweden)

G. Sreedevi

2016-03-01

Full Text Available An analysis has been carried out on the influence of radiation absorption, variable viscosity, Hall current of a magnetohydrodynamic free-convective flow and heat and mass transfer over a stretching sheet in the presence of heat generation/absorption. The fluid viscosity is assumed to vary as an inverse linear function of temperature. The boundary-layer equations governing the fluid flow, heat and mass transfer under consideration have been reduced to a system of nonlinear ordinary differential equations by employing a similarity transformation. Using the finite difference scheme, numerical solutions to the transform ordinary differential equations have been obtained and the results are presented graphically. The numerical results obtained are in good agreement with the existing scientific literature.
Experimental investigation of the stability of a moving radial liquid sheet

Science.gov (United States)

Paramati, Manjula; Tirumkudulu, Mahesh

2013-11-01

Experiments were conducted to understand the stability of moving radial liquid sheets formed by the head-on impingement of two co-linear water jets using laser induced fluorescence technique (LIF). Acoustic sinusoidal fluctuations were introduced at the jet impingement point and we measured the displacement of the center line of the liquid sheet (sinuous mode) and the thickness variation (varicose mode) of the disturbed liquid sheet. Our experiments show that the sinuous disturbances grow as they are convected outward in the radial direction even in the smooth regime (We theory by Tirumkudulu and Paramati (Communicated to Phys. Of Fluids, 2013) which accounts for the inertia of the liquid phase and the surface tension force in a radial liquid sheet while neglecting the inertial effects due to the surrounding gas phase. The authors acknowledge the financial assistance from Indo-French Center for Pro- motion of Advanced Research and also Indian institute of technology Bombay.
Antarctic climate and ice-sheet configuration during the early Pliocene interglacial at 4.23 Ma

Directory of Open Access Journals (Sweden)

N. R. Golledge

2017-07-01

Full Text Available The geometry of Antarctic ice sheets during warm periods of the geological past is difficult to determine from geological evidence, but is important to know because such reconstructions enable a more complete understanding of how the ice-sheet system responds to changes in climate. Here we investigate how Antarctica evolved under orbital and greenhouse gas conditions representative of an interglacial in the early Pliocene at 4.23 Ma, when Southern Hemisphere insolation reached a maximum. Using offline-coupled climate and ice-sheet models, together with a new synthesis of high-latitude palaeoenvironmental proxy data to define a likely climate envelope, we simulate a range of ice-sheet geometries and calculate their likely contribution to sea level. In addition, we use these simulations to investigate the processes by which the West and East Antarctic ice sheets respond to environmental forcings and the timescales over which these behaviours manifest. We conclude that the Antarctic ice sheet contributed 8.6 ± 2.8 m to global sea level at this time, under an atmospheric CO2 concentration identical to present (400 ppm. Warmer-than-present ocean temperatures led to the collapse of West Antarctica over centuries, whereas higher air temperatures initiated surface melting in parts of East Antarctica that over one to two millennia led to lowering of the ice-sheet surface, flotation of grounded margins in some areas, and retreat of the ice sheet into the Wilkes Subglacial Basin. The results show that regional variations in climate, ice-sheet geometry, and topography produce long-term sea-level contributions that are non-linear with respect to the applied forcings, and which under certain conditions exhibit threshold behaviour associated with behavioural tipping points.
The transformations between N= 2 supersymmetric Korteweg-de Vries and Harry Dym equations

International Nuclear Information System (INIS)

Tian Kai; Liu, Q. P.

2012-01-01

The N= 2 supercomformal transformations are employed to study supersymmetric integrable systems. It is proved that two known N= 2 supersymmetric Harry Dym equations are transformed into two N= 2 supersymmetric modified Korteweg-de Vries equations, thus are connected with two N= 2 supersymmetric Korteweg-de Vries equations.

Constituting the Field: An Essay on Harry Torrance's "Qualitative Research Methods in Education"

Science.gov (United States)

Dimitriadis, Greg

2011-01-01

This article critically explores Harry Torrance's four-volume edited collection "Qualitative Research Methods in Education." The author argues that this text is an important intervention in the constitution of a meta-discourse on qualitative research today. Torrance pays particular attention to the field of education, providing much needed…
Probabilistic Design in a Sheet Metal Stamping Process under Failure Analysis

International Nuclear Information System (INIS)

Buranathiti, Thaweepat; Cao, Jian; Chen, Wei; Xia, Z. Cedric

2005-01-01

Sheet metal stamping processes have been widely implemented in many industries due to its repeatability and productivity. In general, the simulations for a sheet metal forming process involve nonlinearity, complex material behavior and tool-material interaction. Instabilities in terms of tearing and wrinkling are major concerns in many sheet metal stamping processes. In this work, a sheet metal stamping process of a mild steel for a wheelhouse used in automobile industry is studied by using an explicit nonlinear finite element code and incorporating failure analysis (tearing and wrinkling) and design under uncertainty. Margins of tearing and wrinkling are quantitatively defined via stress-based criteria for system-level design. The forming process utilizes drawbeads instead of using the blank holder force to restrain the blank. The main parameters of interest in this work are friction conditions, drawbead configurations, sheet metal properties, and numerical errors. A robust design model is created to conduct a probabilistic design, which is made possible for this complex engineering process via an efficient uncertainty propagation technique. The method called the weighted three-point-based method estimates the statistical characteristics (mean and variance) of the responses of interest (margins of failures), and provide a systematic approach in designing a sheet metal forming process under the framework of design under uncertainty
Passive Forensics for Region Duplication Image Forgery Based on Harris Feature Points and Local Binary Patterns

Directory of Open Access Journals (Sweden)

Jie Zhao

2013-01-01

Full Text Available Nowadays the demand for identifying the authenticity of an image is much increased since advanced image editing software packages are widely used. Region duplication forgery is one of the most common and immediate tampering attacks which are frequently used. Several methods to expose this forgery have been developed to detect and locate the tampered region, while most methods do fail when the duplicated region undergoes rotation or flipping before being pasted. In this paper, an efficient method based on Harris feature points and local binary patterns is proposed. First, the image is filtered with a pixelwise adaptive Wiener method, and then dense Harris feature points are employed in order to obtain a sufficient number of feature points with approximately uniform distribution. Feature vectors for a circle patch around each feature point are extracted using local binary pattern operators, and the similar Harris points are matched based on their representation feature vectors using the BBF algorithm. Finally, RANSAC algorithm is employed to eliminate the possible erroneous matches. Experiment results demonstrate that the proposed method can effectively detect region duplication forgery, even when an image was distorted by rotation, flipping, blurring, AWGN, JPEG compression, and their mixed operations, especially resistant to the forgery with the flat area of little visual structures.
Numerical simulations of plasma equilibrium in a one-dimensional current sheet with a nonzero normal magnetic field component

International Nuclear Information System (INIS)

Mingalev, O. V.; Mingalev, I. V.; Malova, Kh. V.; Zelenyi, L. M.

2007-01-01

The force balance in a thin collisionless current sheet in the Earth's magnetotail with a given constant magnetic field component B z across the sheet is numerically studied for the first time in a self-consistent formulation of the problem. The current sheet is produced by oppositely directed plasma flows propagating from the periphery of the sheet toward the neutral plane. A substantially improved version of a macroparticle numerical model is used that makes it possible to simulate on the order of 10 7 macroparticles even with a personal computer and to calculate equilibrium configurations with a sufficiently low discrete noise level in the first-and second-order moments of the distribution function, which determine the stress tensor elements. Quasisteady configurations were calculated numerically for several sets of plasma parameters in some parts of the magnetotail. The force balance in the sheet was checked by calculating the longitudinal and transverse pressures as well as the elements of the full stress tensor. The stress tensor in the current sheet is found to be nondiagonal and to differ appreciably from the gyrotropic stress tensor in the Chew-Goldberger-Low model, although the Chew-Goldberger-Low theory and numerical calculations yield close results for large distances from the region of reversed magnetic field
Best seller: Harry Potter e a mídia do livro

Directory of Open Access Journals (Sweden)

Ada Cristina Machado da Silveira

2012-12-01

Full Text Available O artigo analisa a construção das narrativas da saga Harry Potter. Utilizamos, para isso, o esquema estabelecido por Umberto Eco, o qual se propõe a ver a narrativa como um jogo. Focamos na contribuição feminina para formação do personagem principal, analisando o percurso gerativo de sentido obtido através do mapa semiótico.
Ice shelf fracture parameterization in an ice sheet model

Directory of Open Access Journals (Sweden)

S. Sun

2017-11-01

Full Text Available Floating ice shelves exert a stabilizing force onto the inland ice sheet. However, this buttressing effect is diminished by the fracture process, which on large scales effectively softens the ice, accelerating its flow, increasing calving, and potentially leading to ice shelf breakup. We add a continuum damage model (CDM to the BISICLES ice sheet model, which is intended to model the localized opening of crevasses under stress, the transport of those crevasses through the ice sheet, and the coupling between crevasse depth and the ice flow field and to carry out idealized numerical experiments examining the broad impact on large-scale ice sheet and shelf dynamics. In each case we see a complex pattern of damage evolve over time, with an eventual loss of buttressing approximately equivalent to halving the thickness of the ice shelf. We find that it is possible to achieve a similar ice flow pattern using a simple rule of thumb: introducing an enhancement factor ∼ 10 everywhere in the model domain. However, spatially varying damage (or equivalently, enhancement factor fields set at the start of prognostic calculations to match velocity observations, as is widely done in ice sheet simulations, ought to evolve in time, or grounding line retreat can be slowed by an order of magnitude.
Incorporation of ice sheet models into an Earth system model: Focus on methodology of coupling

Science.gov (United States)

Rybak, Oleg; Volodin, Evgeny; Morozova, Polina; Nevecherja, Artiom

2018-03-01

Elaboration of a modern Earth system model (ESM) requires incorporation of ice sheet dynamics. Coupling of an ice sheet model (ICM) to an AOGCM is complicated by essential differences in spatial and temporal scales of cryospheric, atmospheric and oceanic components. To overcome this difficulty, we apply two different approaches for the incorporation of ice sheets into an ESM. Coupling of the Antarctic ice sheet model (AISM) to the AOGCM is accomplished via using procedures of resampling, interpolation and assigning to the AISM grid points annually averaged meanings of air surface temperature and precipitation fields generated by the AOGCM. Surface melting, which takes place mainly on the margins of the Antarctic peninsula and on ice shelves fringing the continent, is currently ignored. AISM returns anomalies of surface topography back to the AOGCM. To couple the Greenland ice sheet model (GrISM) to the AOGCM, we use a simple buffer energy- and water-balance model (EWBM-G) to account for orographically-driven precipitation and other sub-grid AOGCM-generated quantities. The output of the EWBM-G consists of surface mass balance and air surface temperature to force the GrISM, and freshwater run-off to force thermohaline circulation in the oceanic block of the AOGCM. Because of a rather complex coupling procedure of GrIS compared to AIS, the paper mostly focuses on Greenland.
Evolution of the Eurasian Ice Sheets during the Last Deglaciation (25-10 kyr)

Science.gov (United States)

Hughes, A. L. C.; Gyllencreutz, R.; Mangerud, J.; Svendsen, J. I.; Lohne, Ø. S.

2014-12-01

Both the timing of maximum extent and subsequent pace of retreat of the interconnected Eurasian (British-Irish, Scandinavian, Svalbard-Barents-Kara Sea) Ice Sheets were spatially variable likely reflecting contrasts in response to forcing mechanisms, geographical settings and glacial dynamics both between individual ice sheets and ice-sheet sectors. For example the maximum limit along the western continental shelf edge was reached up to 3,000 years earlier than the maximum, mainly terrestrial, limits in the east. We present new time-slice reconstructions of the ice-sheet evolution through the last deglaciation based on a compiled chronology of over 5,000 dates and published ice-margin positions. Ice-sheet margins are depicted every 1,000 years (25-10 kyr) and include uncertainty estimates (represented by maximum, minimum and most-credible lines). The new ice-sheet scale reconstructions summarise and provide the means for direct comparison of the empirical geological record against simulations of the deglacial ice-sheet evolution from numerical and isostatic ice-sheet modelling and the timing of abrupt events observed in deglacial climate and ocean records. The reconstruction process has identified both instances of conflicting evidence and gaps in the geological record that should be a focus for future studies. This work is part of an on-going project to reconstruct the changing limits of the Eurasian Ice Sheets through the last glacial cycle (www.uib.no/project/dated).
What Has "Harry Potter" Done for Me? Children's Reflections on Their "'Potter' Experience"

Science.gov (United States)

Dempster, Steve; Oliver, Alice; Sunderland, Jane; Thistlethwaite, Joanne

2016-01-01

This article reports findings from a small-scale focus-group study funded by the British Academy. Drawing on Herbert Marsh and Richard Shavelson's notion of "Academic Self-Concept" and David Barton and Mary Hamilton's view of literacy as context-specific social practices, the authors examine what young British "Harry Potter"…
Combustion of available fossil-fuel resources sufficient to eliminate the Antarctic Ice Sheet

Science.gov (United States)

Winkelmann, R.; Levermann, A.; Ridgwell, A.; Caldeira, K.

2015-12-01

The Antarctic Ice Sheet stores water equivalent to 58 meters in global sea-level rise. Here we show in simulations with the Parallel Ice Sheet Model that burning the currently attainable fossil-fuel resources is sufficient to eliminate the ice sheet. With cumulative fossil-fuel emissions of 10 000 GtC, Antarctica is projected to become almost ice-free with an average contribution to sea-level rise exceeding 3 meters per century during the first millennium. Consistent with recent observations and simulations, the West Antarctic Ice Sheet becomes unstable with 600 to 800 GtC of additional carbon emissions. Beyond this additional carbon release, the destabilization of ice basins in both West- and East Antarctica results in a threshold-increase in global sea level. Unabated carbon emissions thus threaten the Antarctic Ice Sheet in its entirety with associated sea-level rise that far exceeds that of all other possible sources.
Confined disclinations: exterior versus material constraints in developable thin elastic sheets.

Science.gov (United States)

Efrati, Efi; Pocivavsek, Luka; Meza, Ruben; Lee, Ka Yee C; Witten, Thomas A

2015-02-01

We examine the shape change of a thin disk with an inserted wedge of material when it is pushed against a plane, using analytical, numerical, and experimental methods. Such sheets occur in packaging, surgery, and nanotechnology. We approximate the sheet as having vanishing strain, so that it takes a conical form in which straight generators converge to a disclination singularity. Then, its shape is that which minimizes elastic bending energy alone. Real sheets are expected to approach this limiting shape as their thickness approaches zero. The planar constraint forces a sector of the sheet to buckle into the third dimension. We find that the unbuckled sector is precisely semicircular, independent of the angle δ of the inserted wedge. We generalize the analysis to include conical as well as planar constraints and thereby establish a law of corresponding states for shallow cones of slope ε and thin wedges. In this regime, the single parameter δ/ε^{2} determines the shape. We discuss the singular limit in which the cone becomes a plane, and the unexpected slow convergence to the semicircular buckling observed in real sheets.
MHD Ballooning Instability in the Plasma Sheet

International Nuclear Information System (INIS)

Cheng, C.Z.; Zaharia, S.

2003-01-01

Based on the ideal-MHD model the stability of ballooning modes is investigated by employing realistic 3D magnetospheric equilibria, in particular for the substorm growth phase. Previous MHD ballooning stability calculations making use of approximations on the plasma compressibility can give rise to erroneous conclusions. Our results show that without making approximations on the plasma compressibility the MHD ballooning modes are unstable for the entire plasma sheet where beta (sub)eq is greater than or equal to 1, and the most unstable modes are located in the strong cross-tail current sheet region in the near-Earth plasma sheet, which maps to the initial brightening location of the breakup arc in the ionosphere. However, the MHD beq threshold is too low in comparison with observations by AMPTE/CCE at X = -(8 - 9)R(sub)E, which show that a low-frequency instability is excited only when beq increases over 50. The difficulty is mitigated by considering the kinetic effects of ion gyrorad ii and trapped electron dynamics, which can greatly increase the stabilizing effects of field line tension and thus enhance the beta(sub)eq threshold [Cheng and Lui, 1998]. The consequence is to reduce the equatorial region of the unstable ballooning modes to the strong cross-tail current sheet region where the free energy associated with the plasma pressure gradient and magnetic field curvature is maximum
Influence of temperature fluctuations on equilibrium ice sheet volume

Directory of Open Access Journals (Sweden)

T. B. Mikkelsen

2018-01-01

Full Text Available Forecasting the future sea level relies on accurate modeling of the response of the Greenland and Antarctic ice sheets to changing temperatures. The surface mass balance (SMB of the Greenland Ice Sheet (GrIS has a nonlinear response to warming. Cold and warm anomalies of equal size do not cancel out and it is therefore important to consider the effect of interannual fluctuations in temperature. We find that the steady-state volume of an ice sheet is biased toward larger size if interannual temperature fluctuations are not taken into account in numerical modeling of the ice sheet. We illustrate this in a simple ice sheet model and find that the equilibrium ice volume is approximately 1 m SLE (meters sea level equivalent smaller when the simple model is forced with fluctuating temperatures as opposed to a stable climate. It is therefore important to consider the effect of interannual temperature fluctuations when designing long experiments such as paleo-spin-ups. We show how the magnitude of the potential bias can be quantified statistically. For recent simulations of the Greenland Ice Sheet, we estimate the bias to be 30 Gt yr−1 (24–59 Gt yr−1, 95 % credibility for a warming of 3 °C above preindustrial values, or 13 % (10–25, 95 % credibility of the present-day rate of ice loss. Models of the Greenland Ice Sheet show a collapse threshold beyond which the ice sheet becomes unsustainable. The proximity of the threshold will be underestimated if temperature fluctuations are not taken into account. We estimate the bias to be 0.12 °C (0.10–0.18 °C, 95 % credibility for a recent estimate of the threshold. In light of our findings it is important to gauge the extent to which this increased variability will influence the mass balance of the ice sheets.
Propagation of acoustic-gravity waves in arctic zones with elastic ice-sheets

Science.gov (United States)

Kadri, Usama; Abdolali, Ali; Kirby, James T.

2017-04-01

We present an analytical solution of the boundary value problem of propagating acoustic-gravity waves generated in the ocean by earthquakes or ice-quakes in arctic zones. At the surface, we assume elastic ice-sheets of a variable thickness, and show that the propagating acoustic-gravity modes have different mode shape than originally derived by Ref. [1] for a rigid ice-sheet settings. Computationally, we couple the ice-sheet problem with the free surface model by Ref. [2] representing shrinking ice blocks in realistic sea state, where the randomly oriented ice-sheets cause inter modal transition at the edges and multidirectional reflections. We then derive a depth-integrated equation valid for spatially slowly varying thickness of ice-sheet and water depth. Surprisingly, and unlike the free-surface setting, here it is found that the higher acoustic-gravity modes exhibit a larger contribution. These modes travel at the speed of sound in water carrying information on their source, e.g. ice-sheet motion or submarine earthquake, providing various implications for ocean monitoring and detection of quakes. In addition, we found that the propagating acoustic-gravity modes can result in orbital displacements of fluid parcels sufficiently high that may contribute to deep ocean currents and circulation, as postulated by Refs. [1, 3]. References [1] U. Kadri, 2016. Generation of Hydroacoustic Waves by an Oscillating Ice Block in Arctic Zones. Advances in Acoustics and Vibration, 2016, Article ID 8076108, 7 pages http://dx.doi.org/10.1155/2016/8076108 [2] A. Abdolali, J. T. Kirby and G. Bellotti, 2015, Depth-integrated equation for hydro-acoustic waves with bottom damping, J. Fluid Mech., 766, R1 doi:10.1017/jfm.2015.37 [3] U. Kadri, 2014. Deep ocean water transportation by acoustic?gravity waves. J. Geophys. Res. Oceans, 119, doi:10.1002/ 2014JC010234
Abraham Lincoln and Harry Potter: Children's Differentiation between Historical and Fantasy Characters

Science.gov (United States)

Corriveau, Kathleen H.; Kim, Angie L.; Schwalen, Courtney E.; Harris, Paul L.

2009-01-01

Based on the testimony of others, children learn about a variety of figures that they never meet. We ask when and how they are able to differentiate between the historical figures that they learn about (e.g., Abraham Lincoln) and fantasy characters (e.g., Harry Potter). Experiment 1 showed that both younger (3- and 4-year-olds) and older children…
Radiation response of two Harris semiconductor radiation hardened 1k CMOS RAMs

International Nuclear Information System (INIS)

Abare, W.E.; Huffman, D.D.; Moffett, G.E.

1982-01-01

This paper describes the testing of two types 1K CMOS static RAMs in various transient and steady state ionizing radiation environments. Type HM 6551R (256x4 bits) and type HM 6508R (1024x1 bit) RAMs were evaluated. The RAMs are radiation hardened versions of Harris' commercial RAMs. A brief description of the radiation hardened process is presented
60 YEARS OF NEUROENDOCRINOLOGY: MEMOIR: Harris' neuroendocrine revolution: of portal vessels and self-priming.

Science.gov (United States)

Fink, George

2015-08-01

Geoffrey Harris, while still a medical student at Cambridge, was the first researcher (1937) to provide experimental proof for the then tentative view that the anterior pituitary gland was controlled by the CNS. The elegant studies carried out by Harris in the 1940s and early 1950s, alone and in collaboration with John Green and Dora Jacobsohn, established that this control was mediated by a neurohumoral mechanism that involved the transport by hypophysial portal vessel blood of chemical substances from the hypothalamus to the anterior pituitary gland. The neurohumoral control of anterior pituitary secretion was proved by the isolation and characterisation of the 'chemical substances' (mainly neuropeptides) and the finding that these substances were released into hypophysial portal blood in a manner consistent with their physiological functions. The new discipline of neuroendocrinology - the way that the brain controls endocrine glands and vice versa - revolutionised the treatment of endocrine disorders such as growth and pubertal abnormalities, infertility and hormone-dependent tumours, and it underpins our understanding of the sexual differentiation of the brain and key aspects of behaviour and mental disorder. Neuroendocrine principles are illustrated in this Thematic Review by way of Harris' major interest: hypothalamic-pituitary-gonadal control. Attention is focussed on the measurement of GnRH in hypophysial portal blood and the role played by the self-priming effect of GnRH in promoting the onset of puberty and enabling the oestrogen-induced surge or pulses of GnRH to trigger the ovulatory gonadotrophin surge in humans and other spontaneously ovulating mammals. © 2015 Society for Endocrinology.
Apuntes para la comprensión de "El descubrimiento de Harry", de Matthew Lipman

Directory of Open Access Journals (Sweden)

Diego Antonio Pineda Rivera

2015-01-01

Full Text Available Este trabajo recoge algunas ideas generales en torno a la novela de Matthew Lipman El descubrimiento de Harry. La pretensión del artículo es ofrecer "claves de lectura" que ayuden a los maestros que leen la novela, o la trabajan con su grupo de alumnos en un salón de clase, a comprender su significado filosófico. Para ello el artículo describe el contexto definido por las cuatro novelas del programa completo de "Filosofía para niños" que propone el autor y, a partir de allí, aborda cinco elementos que resultan orientadores para el lector potencial: cuál es el descubrimiento de Harry, la estructura teórica y narrativa de la novela, la relación de la lógica con otros problemas filosóficos, las "formas del pensamiento superior", y algunas sugerencias para trabajar la novela en el aula de clase. Recorre en el proceso aspectos propios de la filosofía que la novela asume, como las proposiciones categóricas, que constituyen el principal descubrimiento de Harry, la construcción del lenguaje de la lógica formal, los actos mentales y los mecanismos de validación de los razonamientos, así como la relación que se da entre pensamiento y lenguaje, y sus implicaciones en el abordaje de problemas desde los diversos ámbitos de la filosofía: cosmológicos, políticos, estéticos, epistemológicos, éticos, etc.
Apuntes para la comprensión de "El descubrimiento de Harry", de Matthew Lipman

Directory of Open Access Journals (Sweden)

Diego Antonio Pineda R.

2015-01-01

Full Text Available Este trabajo recoge algunas ideas generales en torno a la novela de Matthew Lipman El descubrimiento de Harry . La pretensión del artículo es ofrecer "claves de lectura" que ayuden a los maestros que leen la novela, o la trabajan con su grupo de alumnos en un salón de clase, a comprender su significado filosófico. Para ello el artículo describe el contexto definido por las cuatro novelas del programa completo de "Filosofía para niños" que propone el autor y, a partir de allí, aborda cinco elementos que resultan orientadores para el lector poten- cial: cuál es el descubrimiento de Harry, la estructura teórica y narrativa de la novela, la relación de la lógica con otros problemas filosóficos, las "formas del pensamiento superior", y algunas sugerencias para trabajar la novela en el aula de clase. Recorre en el proceso aspectos propios de la filosofía que la novela asume, como las proposiciones categóricas, que constituyen el principal descubrimiento de Harry, la construcción del lenguaje de la lógica formal, los actos mentales y los mecanismos de validación de los razonamientos, así como la relación que se da entre pensamiento y lenguaje, y sus implicaciones en el abordaje de problemas desde los diversos ámbitos de la filosofía: cosmológicos, políticos, estéticos, epistemológicos, éticos, etc.
The Harry Potter effect: The rise in trade of owls as pets in Java and Bali, Indonesia

Directory of Open Access Journals (Sweden)

Vincent Nijman

2017-07-01

Full Text Available Hundreds of species of wild-caught birds are offered for sale in the bird markets of Java and Bali, Indonesia, to meet the demand for the largely-domestic pet and songbird trade. In the past, owls were offered only in very small numbers in these bird markets but since the release of the Harry Potter series in Indonesia in the early 2000s their popularity as pets has increased. Whereas in the past owls were collective known as Burung Hantu (“Ghost birds”, in the bird markets they are now commonly referred to as Burung Harry Potter (“Harry Potter birds”. We made a retrospective quantitative assessment of the abundance of owls in the bird markets (1979–2010 and conducted 109 surveys in 20 bird markets in 2012–2016 to quantify owls in trade. In the 1980s, 1990s and early 2000s owls were rarely recorded in Indonesia's bird markets, typically one or two and up to five per survey, and frequently no owls were recorded at all. The trade was largely confined to small scops owls. In the late 2000s more species were offered for sale, including barn and bay owls, and larger owl species such as wood-owls, eagle-owls and fish-owls; typically 10 + owls were observed per survey. In recent years, the number of owl species increased even more, and on average we recorded 17 owls per survey, yielding a total of 1810 owls, and in >90% of the surveys owls were present. In the larger bird markets in Jakarta and Bandung typically 30 to 60 owls are on offer of up to 8 species at a time. The number of owls as a proportion of all birds in the markets increased from 0.43% post 2008, suggesting a delayed Harry Potter effect. Over this period, common species have become cheaper and less common ones have become more expensive. The owls are largely, if not exclusively, wild-caught and are sold into the domestic pet market. The release of Harry Potter films and novels in Indonesia coincided with the rise of the Internet and social media and, with some delay, the

The Harris and Beath footprinting mat: diagnostic validity and clinical use.

Science.gov (United States)

Silvino, N; Evanski, P M; Waugh, T R

1980-09-01

Pain on the plantar aspect of the forefoot is a common malady whose specific cause is often difficult to diagnose. Using the Berkemann Laboratory version of the original mat of Harris and Beath, and a calibration curve, the patterns on a footprint can be translated into their actual pressure values withhin the range of 0.27 kg/cm2 to 4.80 kg/cm2. Using the procedure presented here, inexperienced subjects were able to estimate the pressure values of random prints of unknown pressure within a standard deviation of 0.28 kg/cm2 from their actual values. The mat is valuable for diagnosis of pressure metatarsalgia and other disorders of the foot. The specificity was 0.77, sensitivity was 0.57, with the sum being equal to 1.34. These results indicate that there is a relatively large population of normal people wit excessive localized pressure under their metatarsal heads who do not complain of pain. The apparently low sensitivty of the mat in this study does not seem to be a limitation, but is an indication of the haziness involved in the differential diagnosis of forefoot pain. Pressure metatarsalgia can be quantitated by analysis of the Harris footprint.
Heat and mass transfer of Williamson nanofluid flow yield by an inclined Lorentz force over a nonlinear stretching sheet

Directory of Open Access Journals (Sweden)

Mair Khan

2018-03-01

Full Text Available The present analysis is devoted to explore the computational solution of the problem addressing the variable viscosity and inclined Lorentz force effects on Williamson nanofluid over a stretching sheet. Variable viscosity is assumed to vary as a linear function of temperature. The basic mathematical modelled problem i.e. system of PDE’s is converted nonlinear into ODE’s via applying suitable transformations. Computational solutions of the problem is also achieved via efficient numerical technique shooting. Characteristics of controlling parameters i.e. stretching index, inclined angle, Hartmann number, Weissenberg number, variable viscosity parameter, mixed convention parameter, Brownian motion parameter, Prandtl number, Lewis number, thermophoresis parameter and chemical reactive species on concentration, temperature and velocity gradient. Additionally, friction factor coefficient, Nusselt number and Sherwood number are describe with the help of graphics as well as tables verses flow controlling parameters. Keywords: Williamson nanofluid, Temperature depended viscosity, Inclined magnetic field, Mixed convection, Chemical reactive species, Variable viscosity, Shooting method
Last Interglacial climate and sea-level evolution from a coupled ice sheet-climate model

Science.gov (United States)

Goelzer, Heiko; Huybrechts, Philippe; Loutre, Marie-France; Fichefet, Thierry

2016-12-01

As the most recent warm period in Earth's history with a sea-level stand higher than present, the Last Interglacial (LIG, ˜ 130 to 115 kyr BP) is often considered a prime example to study the impact of a warmer climate on the two polar ice sheets remaining today. Here we simulate the Last Interglacial climate, ice sheet, and sea-level evolution with the Earth system model of intermediate complexity LOVECLIM v.1.3, which includes dynamic and fully coupled components representing the atmosphere, the ocean and sea ice, the terrestrial biosphere, and the Greenland and Antarctic ice sheets. In this setup, sea-level evolution and climate-ice sheet interactions are modelled in a consistent framework.Surface mass balance change governed by changes in surface meltwater runoff is the dominant forcing for the Greenland ice sheet, which shows a peak sea-level contribution of 1.4 m at 123 kyr BP in the reference experiment. Our results indicate that ice sheet-climate feedbacks play an important role to amplify climate and sea-level changes in the Northern Hemisphere. The sensitivity of the Greenland ice sheet to surface temperature changes considerably increases when interactive albedo changes are considered. Southern Hemisphere polar and sub-polar ocean warming is limited throughout the Last Interglacial, and surface and sub-shelf melting exerts only a minor control on the Antarctic sea-level contribution with a peak of 4.4 m at 125 kyr BP. Retreat of the Antarctic ice sheet at the onset of the LIG is mainly forced by rising sea level and to a lesser extent by reduced ice shelf viscosity as the surface temperature increases. Global sea level shows a peak of 5.3 m at 124.5 kyr BP, which includes a minor contribution of 0.35 m from oceanic thermal expansion. Neither the individual contributions nor the total modelled sea-level stand show fast multi-millennial timescale variations as indicated by some reconstructions.
Experimental observations of the tearing of an electron current sheet

International Nuclear Information System (INIS)

Gekelman, W.; Pfister, H.

1988-01-01

A neutral magnetic sheet, in which the current is carried mainly by the electrons, is set up in a laboratory plasma. By forcing the current through a thin slot, the ratio of the length to height t of the sheet may be varied; the current is observed to tear when tapprox. >30. The structure of the magnetic islands and their associated currents is fully three dimensional, although a linear two-dimensional theory gives a very good estimate of the tearing mode growth time. Tearing is accompanied by the generation of significant Hall currents, and magnetic disturbances are observed to propagate at the whistler wave speed
Harry Potter and "the Landscape of Consciousness": Repeat Home Viewers' Understandings about Character

Science.gov (United States)

Finch, Brian

2012-01-01

Many children view favourite feature films repeatedly at home and develop understandings of them. This article discusses findings from a study which focused on the understandings that 9- and 10-year-old children showed about character in "Harry Potter and the Chamber of Secrets." These findings are reported in terms of a framework…
Off-balance-sheet financing can generate capital for strategic development.

Science.gov (United States)

Campobasso, F D

2000-06-01

To manage their real estate portfolios effectively and obtain funding for strategic development, IDSs should consider adopting off-balance-sheet financing strategies, such as sale-and-leaseback transactions, synthetic leases, and joint-venture arrangements. Under these approaches, real estate assets are moved off of the organization's balance sheet via a partial or complete transfer of ownership to a third-party entity. The organization typically retains a satisfactory degree of control over the assets as lessee in sale-and-leaseback and synthetic-lease arrangements, or limited or minority partner in a joint venture, while freeing up cash to use for other strategic purposes.
Chernobyl reaction: Harris, Seabrook hit; DOE backs Hanford-N

International Nuclear Information System (INIS)

Anon.

1986-01-01

The Chernobyl-4 reactor did not cause as intense an antinuclear reaction as the Three Mile Island accident. Turnout at public protest demonstrations was modest, with the largest taking place at the Seabrook and Harris sites. A review of the Hanford-N reactor which is similar to the Soviet design, is underway. The Nuclear Regulatory Commission reports pressure switch failures at the LaSalle-2 units, litigation over the power licensing of the Shorham unit, and other safety compliance and accident problems associated with other units seeking licensing. The report also covers court actions involving rate actions and debt ratings
Free and Forced Vibrations of Periodic Multispan Beams

Directory of Open Access Journals (Sweden)

Liping Zhu

1994-01-01

Full Text Available In this study, the following two topics are considered for uniform multispan beams of both finite and infinite lengths with rigid transversal and elastic rotational constraints at each support: (a free vibration and the associated frequencies and mode shapes; (b forced vibration under a convected harmonic loading. The concept of wave propagation in periodic structures of Brillouin is utilized to investigate the wave motion at periodic supports of a multispan beam. A dispersion equation and its asymptotic form is obtained to determine the natural frequencies. For the special case of zero rotational spring stiffness, an explicit asymptotic expression for the natural frequency is also given. New expressions for the mode shapes are obtained in the complex form for multispan beams of both finite and infinite lengths. The orthogonality conditions of the mode shapes for two cases are formulated. The exact responses of both finite and infinite span beams under a convected harmonic loading are obtained. Thus, the position and the value of each peak in the harmonic response function can be determined precisely, as well as the occurrence of the so-called coincidence phenomenon, when the response is greatly enhanced.
Label-free immunosensor for the detection of kanamycin using Ag@Fe₃O₄ nanoparticles and thionine mixed graphene sheet.

Science.gov (United States)

Yu, Shujun; Wei, Qin; Du, Bin; Wu, Dan; Li, He; Yan, Liangguo; Ma, Hongmin; Zhang, Yong

2013-10-15

A highly sensitive label-free immunosensor for the detection of kanamycin had been developed using silver hybridized mesoporous ferroferric oxide nanoparticles (Ag@Fe₃O₄ NPs) and thionine mixed graphene sheet (TH-GS). TH was used as an electron transfer mediator. The electrical signal was greatly improved in the presence of GS due to its good electron-transfer ability. With the advantages of large specific surface area and excellent electrical conductivity, Ag@Fe₃O₄ NPs could immobilize more antibodies of kanamycin and promote the electron transfer. Cyclic voltammetry and square wave voltammetry were used to characterize the recognition of kanamycin. The proposed immunosensor showed good performances such as low detection limit (15 pg mL⁻¹), wide linear range (from 0.050 to 16 ng mL⁻¹), short analysis time (3 min), high stability, and good selectivity in the detection of kanamycin. The immunosensor was evaluated for pork meat sample, receiving satisfactory results. Copyright © 2013 Elsevier B.V. All rights reserved.
An Imminent Revolution in Modeling Interactions of Ice Sheets With Climate

Science.gov (United States)

Hughes, T.

2008-12-01

Modeling continental ice sheets was inaugurated by meteorologists William Budd and Uwe Radok, with mathematician Richard Jenssen, in 1971. Their model calculated the thermal and mechanical regime using measured surface accumulation rates, temperatures, and elevations, and bed topography. This top-down approach delivered a basal thermal regime of temperatures or melting rates for an assumed basal geothermal heat flux. When Philippe Huybrechts and others incorporated time, largely unknownpast surface conditions had a major effect on present basal thermal conditions. This approach produced ice-sheet models with only a slow response to external forcing, whereas the glacial geological record and climate records from ice and ocean cores show that ice sheets can have rapid changes in size and shape independent of external forcing. These top-down models were wholly inadequate for reconstructing former ice sheets at the LGM for CLIMAP in 1981. Ice-sheet areas,elevations, and volumes provided the albedo, surface topography, and sea-surface area as input to climate models. A bottom-up model based on dated glacial geology was developed to provide the areal extent and basal thermal regime of ice sheets at the LGM. Basal thermal conditions determined ice-bed coupling and therefore the elevation of ice sheets. High convex ice surfaces for slow sheet flow lower about 20 percent when a frozen bed becomes thawed. As further basal melting drowns bedrock bumps that "pin" basal ice, the ice surface becomes concave in fast stream flow that ends as low floating ice shelves at marine ice margins. A revolution in modeling interactions between glaciation, climate, and sea level is driven by new Greenland and Antarctic data from Earth-orbiting satellites, airborne and surface traverses, and deep drilling. We anticipate continuous data acquisition of surface albedo, accumulation/ablation rates, elevations, velocities, and temperatures over a whole ice sheet, mapping basal thermal conditions
Label-free quantification of Tacrolimus in biological samples by atomic force microscopy

International Nuclear Information System (INIS)

Menotta, Michele; Biagiotti, Sara; Streppa, Laura; Rossi, Luigia; Magnani, Mauro

2015-01-01

Highlights: • Tacrolimus is a potent immunosuppressant drug that has to be continually monitored. • We present an atomic force microscope approach for quantification of Tacrolimus in blood samples. • Detection and quantification have been successfully achieved. - Abstract: In the present paper we describe an atomic force microscopy (AFM)-based method for the quantitative analysis of FK506 (Tacrolimus) in whole blood (WB) samples. Current reference methods used to quantify this immunosuppressive drug are based on mass spectrometry. In addition, an immunoenzymatic assay (ELISA) has been developed and is widely used in clinic, even though it shows a small but consistent overestimation of the actual drug concentration when compared with the mass spectrometry method. The AFM biosensor presented herein utilises the endogen drug receptor, FKBP12, to quantify Tacrolimus levels. The biosensor was first assayed to detect the free drug in solution, and subsequently used for the detection of Tacrolimus in blood samples. The sensor was suitable to generate a dose–response curve in the full range of clinical drug monitoring. A comparison with the clinically tested ELISA assay is also reported
Label-free quantification of Tacrolimus in biological samples by atomic force microscopy

Energy Technology Data Exchange (ETDEWEB)

Menotta, Michele, E-mail: michele.menotta@uniurb.it [Department of Biomolecular Sciences, University of Urbino “Carlo Bo” via Saffi 2, Urbino (Italy); Biagiotti, Sara [Department of Biomolecular Sciences, University of Urbino “Carlo Bo” via Saffi 2, Urbino (Italy); Streppa, Laura [Physics Laboratory, CNRS-ENS, UMR 5672, Lyon (France); Cell and Molecular Biology Laboratory, CNRS-ENS Lyon, UMR 5239, IFR128, Lyon (France); Rossi, Luigia; Magnani, Mauro [Department of Biomolecular Sciences, University of Urbino “Carlo Bo” via Saffi 2, Urbino (Italy)

2015-07-16

Highlights: • Tacrolimus is a potent immunosuppressant drug that has to be continually monitored. • We present an atomic force microscope approach for quantification of Tacrolimus in blood samples. • Detection and quantification have been successfully achieved. - Abstract: In the present paper we describe an atomic force microscopy (AFM)-based method for the quantitative analysis of FK506 (Tacrolimus) in whole blood (WB) samples. Current reference methods used to quantify this immunosuppressive drug are based on mass spectrometry. In addition, an immunoenzymatic assay (ELISA) has been developed and is widely used in clinic, even though it shows a small but consistent overestimation of the actual drug concentration when compared with the mass spectrometry method. The AFM biosensor presented herein utilises the endogen drug receptor, FKBP12, to quantify Tacrolimus levels. The biosensor was first assayed to detect the free drug in solution, and subsequently used for the detection of Tacrolimus in blood samples. The sensor was suitable to generate a dose–response curve in the full range of clinical drug monitoring. A comparison with the clinically tested ELISA assay is also reported.
Child Care in Sweden. Fact Sheets on Sweden.

Science.gov (United States)

Swedish Inst., Stockholm.

This fact sheet outlines Sweden's policies of government-supported child care and parental insurance provisions. Swedish families receive: (1) free maternity and child health care; (2) child allowances for each child of 9,000 krona per year through age 16; (3) up to 450 days of paid parental leave for the birth of a child, with 360 days paid at 90…
The crack growth resistance of thin steel sheets under eccentric ...

Indian Academy of Sciences (India)

Ľ AMBRIŠKO

2018-03-10

Mar 10, 2018 ... of zinc-coated automotive steel sheets (IF – deep drawing interstitial free steel ..... to determine; therefore, the Ji was determined for observ- able crack initiation .... M R S, da Silva L F M and de Castro P M S T 2011. Analysis of ...
Harry Potter (I): 'n Motivering vir die insluiting van die reeks in die ...

African Journals Online (AJOL)

Many educators have already asked the question, “How should I read and handle the Harry Potter books?”. This article describes several criteria that have relevance for the educator of Afrikaans who has to choose prescribed books for the senior school phase. These criteria are discussed to enter the debate about the value ...
Combustion of available fossil fuel resources sufficient to eliminate the Antarctic Ice Sheet.

Science.gov (United States)

Winkelmann, Ricarda; Levermann, Anders; Ridgwell, Andy; Caldeira, Ken

2015-09-01

The Antarctic Ice Sheet stores water equivalent to 58 m in global sea-level rise. We show in simulations using the Parallel Ice Sheet Model that burning the currently attainable fossil fuel resources is sufficient to eliminate the ice sheet. With cumulative fossil fuel emissions of 10,000 gigatonnes of carbon (GtC), Antarctica is projected to become almost ice-free with an average contribution to sea-level rise exceeding 3 m per century during the first millennium. Consistent with recent observations and simulations, the West Antarctic Ice Sheet becomes unstable with 600 to 800 GtC of additional carbon emissions. Beyond this additional carbon release, the destabilization of ice basins in both West and East Antarctica results in a threshold increase in global sea level. Unabated carbon emissions thus threaten the Antarctic Ice Sheet in its entirety with associated sea-level rise that far exceeds that of all other possible sources.
A probabilistic evaluation of the Shearon Harris Nuclear Power Plant auxiliary feedwater isolation system

International Nuclear Information System (INIS)

Anoba, R.C.

1989-01-01

This paper reports on a fault tree approach that was used to evaluate the safety significance of modifying the Shearon Harris Auxiliary Feedwater Isolation System. The design modification was a result of on-site reviews which identified a single failure in the Auxiliary Feedwater Isolation circuitry
Investigation of combined free and forced convection in a 2 x 6 rod bundle during controlled flow transients

International Nuclear Information System (INIS)

Bates, J.M.; Khan, E.U.

1980-10-01

An experimental study was performed to obtain local fluid velocity and temperature measurements in the mixed (combined free and forced) convection regime for specific flow coastdown transients. A brief investigation of steady-state flows for the purely free-convection regime was also completed. The study was performed using an electrically heated 2 x 6 rod bundle contained in a flow housing. In addition a transient data base was obtained for evaluating the COBRA-WC thermal-hydraulic computer program
Analytical and molecular dynamics studies on the impact loading of single-layered graphene sheet by fullerene

Science.gov (United States)

Hosseini-Hashemi, Shahrokh; Sepahi-Boroujeni, Amin; Sepahi-Boroujeni, Saeid

2018-04-01

Normal impact performance of a system including a fullerene molecule and a single-layered graphene sheet is studied in the present paper. Firstly, through a mathematical approach, a new contact law is derived to describe the overall non-bonding interaction forces of the "hollow indenter-target" system. Preliminary verifications show that the derived contact law gives a reliable picture of force field of the system which is in good agreements with the results of molecular dynamics (MD) simulations. Afterwards, equation of the transversal motion of graphene sheet is utilized on the basis of both the nonlocal theory of elasticity and the assumptions of classical plate theory. Then, to derive dynamic behavior of the system, a set including the proposed contact law and the equations of motion of both graphene sheet and fullerene molecule is solved numerically. In order to evaluate outcomes of this method, the problem is modeled by MD simulation. Despite intrinsic differences between analytical and MD methods as well as various errors arise due to transient nature of the problem, acceptable agreements are established between analytical and MD outcomes. As a result, the proposed analytical method can be reliably used to address similar impact problems. Furthermore, it is found that a single-layered graphene sheet is capable of trapping fullerenes approaching with low velocities. Otherwise, in case of rebound, the sheet effectively absorbs predominant portion of fullerene energy.
Assessing the formability of metallic sheets by means of localized and diffuse necking models

Science.gov (United States)

Comşa, Dan-Sorin; Lǎzǎrescu, Lucian; Banabic, Dorel

2016-10-01

The main objective of the paper consists in elaborating a unified framework that allows the theoretical assessment of sheet metal formability. Hill's localized necking model and the Extended Maximum Force Criterion proposed by Mattiasson, Sigvant, and Larsson have been selected for this purpose. Both models are thoroughly described together with their solution procedures. A comparison of the theoretical predictions with experimental data referring to the formability of a DP600 steel sheet is also presented by the authors.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.