Survey and analysis of materials research and development at selected federal laboratories

Energy Technology Data Exchange (ETDEWEB)

Reed, J.E.; Fink, C.R.

1984-04-01

This document presents the results of an effort to transfer existing, but relatively unknown, materials R and D from selected federal laboratories to industry. More specifically, recent materials-related work at seven federal laboratories potentially applicable to improving process energy efficiency and overall productiviy in six energy-intensive manufacturing industries was evaluated, catalogued, and distributed to industry representatives to gauge their reaction. Laboratories surveyed include: Air Force Wright Aeronautical Laboratories Material Laboratory (AFWAL). Pacific Northwest Laboratory (PNL), National Aeronautics and Space Administration Marshall Flight Center (NASA Marshall), Oak Ridge National Laboratory (ORNL), Brookhaven National Laboratory (BNL), Idaho National Engineering Laboratory (INEL), and Jet Propulsion Laboratory (JPL). Industries included in the effort are: aluminum, cement, paper and allied products, petroleum, steel and textiles.

OSHA Laboratory Standard: Driving Force for Laboratory Safety!

Science.gov (United States)

Roy, Kenneth R.

2000-01-01

Discusses the Occupational Safety and Health Administration's (OSHA's) Laboratory Safety Standards as the major driving force in establishing and maintaining a safe working environment for teachers and students. (Author)

Frank Lloyd Wright in the Soviet Union

Directory of Open Access Journals (Sweden)

Brian A. Spencer

2017-12-01

Full Text Available In 1937 the First All-Union Congress of Soviet Architects was held in Moscow. The congress brought  architects from all areas of the  Soviet Union. Under the auspices of Vsesoiuvnoe Obshchestvo Kul'turnoi Sviazi s zagranitsei (VOKS it invited international architects from Europe and North and South America.  The Organizing Committee of the Union of Soviet Architects invited Frank Lloyd Wright from the United States. Frank Lloyd Wright presented his philosophy and exhibited his work, specifically his designs for the weekend home for E. J. Kaufmann "Fallingwater" and the drawings for the S.C. Johnson Administration. Frank Lloyd Wright's presentation did not focus heavily on the architecture but, rather the spirit of the Russian and Soviet vision.

Sir Almroth Wright: pioneer immunologist.

Science.gov (United States)

Ellis, Harold

2011-03-01

This year marks the 150th anniversary of the birth of Almroth Edward Wright, whose pioneer work in immunology saved countless lives, especially in the First World War, but whose name and work are all but forgotten today. Wright was born in 1861 in Middleton Tyas, Yorkshire, where his father, an Irish protestant and considerable Hebrew scholar, was the minister. Almroth's Swedish mother, the daughter of NW Almroth, governor of the mint in Stockholm, was responsible for his unusual first name. She had the rare distinction of having served as a nurse with Florence Nightingale in the hospital at Scutari in the Crimean War.

Because Everyone Has a Story to Tell: Interview with Andrew Wright

Science.gov (United States)

Floris, Flora Debora

2016-01-01

This article presents an interview with Andrew Wright, a widely recognized author, illustrator, storyteller, and teacher trainer. Wright has published many ELT books, authored six "Spellbinder" graded readers (1992-1994), and a collection of short stories. As a teacher trainer, Wright worked extensively with both teachers and students in…

Spacecraft contamination programs within the Air Force Systems Command Laboratories

Science.gov (United States)

Murad, Edmond

1990-01-01

Spacecraft contamination programs exist in five independent AFSC organizations: Geophysics Laboratory (GL), Arnold Engineering and Development Center (AEDC), Rome Air Development Center (RADC/OSCE), Wright Research and Development Center (MLBT), Armament Laboratory (ATL/SAI), and Space Systems Division (SSD/OL-AW). In addition, a sizable program exists at Aerospace Corp. These programs are complementary, each effort addressing a specific area of expertise: GL's effort is aimed at addressing the effects of on-orbit contamination; AEDC's effort is aimed at ground simulation and measurement of optical contamination; RADC's effort addresses the accumulation, measurement, and removal of contamination on large optics; MLBT's effort is aimed at understanding the effect of contamination on materials; ATL's effort is aimed at understanding the effect of plume contamination on systems; SSD's effort is confined to the integration of some contamination experiments sponsored by SSD/CLT; and Aerospace Corp.'s effort is aimed at supporting the needs of the using System Program Offices (SPO) in specific areas, such as contamination during ground handling, ascent phase, laboratory measurements aimed at understanding on-orbit contamination, and mass loss and mass gain in on-orbit operations. These programs are described in some detail, with emphasis on GL's program.

[Environmental investigation of ground water contamination at Wright-Patterson Air Force Base, Ohio]. Volume 5, Field Investigation report

Energy Technology Data Exchange (ETDEWEB)

1992-03-01

An environmental investigation of ground water conditions has been undertaken at Wright-Patterson Air Force Base (WPAFB), Ohio to obtain data to assist in the evaluation of a potential removal action to prevent, to the extent practicable, migration of the contaminated ground water across Base boundaries. Field investigations were limited to the central section of the southwestern boundary of Area C and the Springfield Pike boundary of Area B. Further, the study was limited to a maximum depth of 150 feet below grade. Three primary activities of the field investigation were: (1) installation of 22 monitoring wells, (2) collection and analysis of ground water from 71 locations, (3) measurement of ground water elevations at 69 locations. Volatile organic compounds including trichloroethylene, perchloroethylene, and/or vinyl chloride were detected in concentrations exceeding Maximum Contaminant Levels (MCL) at three locations within the Area C investigation area. Ground water at the Springfield Pike boundary of Area B occurs in two primary units, separated by a thicker-than-expected clay layers. One well within Area B was determined to exceed the MCL for trichloroethylene.

SUSTAINABLE ORIGINS IN ARCHITECTURE OF FRANK LLOYD WRIGHT

Directory of Open Access Journals (Sweden)

Martina Zbašnik-Senegačnik

2012-10-01

Full Text Available Frank Lloyd Wright is the greatest American architect and oneof the greatest architects the world. His career began at theend of the 19th century, during the great architectural boom inChicago, under the mentorship of Louis Henry Sullivan, fromwhom he adopted and then perfected the concepts of organicarchitecture and the Prairie house. During the Depressionyears, Wright developed a cheaper and simpler variant of thePrairie house: the Usonian house.Wright's architecture is characterised by an entirely newapproach to building design, particularly the design of houses.He reduced the number of rooms by combining their functionsin a large living space with a central fireplace. He used largeglazed areas to connect the external environment of the housewith the interior. The natural environment of the prairie wasthe inspiration for the horizontal lines that characterised hisarchitecture. His buildings are low in height, close to humanscale and with a great feeling for the natural setting in whichthey are built. He selected materials from the surroundingarea and the principal decoration of his architecture was thenatural structure of the material.The paper presents the ideas of organic architecture, thePrairie house, the Usonian house, along with the best examplesof Wright's architecture and the criteria he employed in theselection of materials and construction technologies. Theenvironmental aspect of his philosophy of the use of materialsis considered in the discussion section.Wright may be considered a pioneer of sustainable architecture.

[Environmental investigation of ground water contamination at Wright- Patterson Air Force Base, Ohio]. Volume 4, Health and Safety Plan (HSP); Phase 1, Task 4 Field Investigation report: Draft

Energy Technology Data Exchange (ETDEWEB)

1991-10-01

This Health and Safety Plan (HSP) was developed for the Environmental Investigation of Ground-water Contamination Investigation at Wright-Patterson Air Force Base near Dayton, Ohio, based on the projected scope of work for the Phase 1, Task 4 Field Investigation. The HSP describes hazards that may be encountered during the investigation, assesses the hazards, and indicates what type of personal protective equipment is to be used for each task performed. The HSP also addresses the medical monitoring program, decontamination procedures, air monitoring, training, site control, accident prevention, and emergency response.

The wounded male persona and the mysterious feminine in the poetry of James Wright: a study in the transformation of the self.

Science.gov (United States)

Graves, M; Schermer, V L

1998-12-01

known about Wright's childhood to attempt to reconstruct such a trauma, and a definitive biography is long overdue. (Wright died in 1980). However, the concept of "soul murder" as used by Shengold (1989) with respect to psychological trauma does seem pertinent. For example, Wright's powerful identification with the downtrodden, and especially with certain murderers (Doty, Judas) echoes the paranoiac Schreber's identification with his abusive father as "soul murderer": "I, myself, have been 'represented' as the one who had committed soul murder" (Shengold, 1989, p. 22, quoting Schreber). Certainly, the theme of damage to the self is prominent in Wright, and the poet's striving for reparation, restitution, and the restoration of lost goodness is not only characteristic of Melanie Klein's "depressive position" (Segal, 1980, pp. 76-89), which she saw as a normal developmental process, but also of the character structures of profoundly traumatized individuals. In addition, the rapid, "leaping" shifts of imagery in Wright's poems bear some resemblance to the shifts in mood and the dissociated and "autohypnotic" states (Shengold, 1989, pp. 138-154) of posttraumatic stress and related disorders. However much that may be the case, Wright's work moves toward healing and integration, and forces us to reconsider the psychoanalytic shibboleth that all that represents a lack of distinctiveness between self and other is pathological. This assumption denies the richness of that part of the psyche which originates in the symbiotic union of mother and infant. Wright's work does not so much force us to doubt our own perceptions of reality as it gently yet forthrightly guides us into other realms where feeling and thought are in dialogue, where the uniquely human and the universal mythos converge, and where--perhaps most importantly--possibility and transformation are imminent. The abandoned male persona and the mysterious feminine are part of that world, that cosmos, that Wright has cr

Women in History--Marian Wright Edelman: Crusader for Civil and Children's Rights

Science.gov (United States)

Mills, Shirley J.

2006-01-01

This article profiles Marian Wright Edelman, a crusader for civil and children's rights. She was born June 6, 1939, at a time when prejudice and segregation were the norm. The Wright family lived in a small, southern town of Bennetsville, South Carolina, where Marian was the youngest of five children. Her father, the Reverend Arthur Jerome Wright,…

Environmental Assessment for the AFIT Master Plan, Wright-Patterson Air Force Base, Ohio, 88th Air Base Wing

Science.gov (United States)

2011-05-20

Creek during a base-wide mist net survey (BHE 2001). Radio tracking of these two bats confirmed the presence of a maternity colony in a dead slippery ... elm (Ulmus rubra) in a woodlot on the campus of Wright State University. No sightings of Indiana bats have been reported within the area of the

La arquitectura tardía de Frank Lloyd Wright, el primer maestro moderno

OpenAIRE

González Capitel, Antón

1996-01-01

1. La arquitectura tardía de Frank Lloyd Wright, el primer maestro moderno l. l. Un Wright renovado. Talleres y residencias l. l. l. Nuevas casas de Wright en su segunda «edad de oro»: un neoplasticismo orgánico en la casa de la Cascada l. l. 2. Geometrías y disposiciones alternativas l. 2. Arquitectura y ciudad orgánicas 1. 2. 1. El desarrollo de la arquitectura orgánica 1. 3. Arquitecturas relacionadas con la de Frank Lloyd Wright entre los emigrados europeos: Schindler y...

Modern housing design: prefabricated and modular design in Frank Lloyd Wright's architecture

Directory of Open Access Journals (Sweden)

Ana Tagliari

2011-12-01

Full Text Available This paper investigates the residential architecture of Frank Lloyd Wright, especially the designs which were conceived from an idea of prefabricated, modular, low-cost, and high-scale construction. Wright's organic designs originated from a material-based grid, which at the same time organized and provided freedom to create spaces and forms. This study reviews Wright's work, from his first Midwest designs that relied on brick, through an intermediary phase in California when he made intense use of concrete blocks, until his last phase, the usonian houses, which featured wood paneling. During his early career, the concept and the methodology of Wright's ideas greatly contributed to a better understanding of his architecture, his apprentices and his followers. The economy and rationalization found in the projects reviewed are of great importance as the analysis of historical proposals helps us understand the topic in question.

Laboratory experiments inform iceberg-calving forces

Science.gov (United States)

Cathles, L. M.; Burton, J. C.

2013-12-01

Globally detected glacial earthquakes are produced during cubic-kilometer scale calving events. The mechanism producing these earthquakes and the dependence of the seismic moment on iceberg size and glacial calving front geometry are not well established. We use a laboratory-scale model of the post-fracture calving process to measure aspects of the calving process not observable in nature. In our experiments, buoyant plastic blocks rest against against a force plate (glacial terminus) which measures both the total force and the torque exerted during the calving process. The blocks are gravitationally unstable, so that they will spontaneously capsize and rotate away from the terminus. We find that hydrodynamics are crucial when considering the coupling between the calving process and the solid earth. There is both a pushing contact force and a simultaneous pulling hydrodynamic force created by a reduced pressure along the terminus face. This suggests that a single couple force mechanism is a more appropriate mode for glacial earthquakes than the commonly used centroid single force model.

75 FR 80669 - Wright Brothers Day, 2010

Science.gov (United States)

2010-12-22

... curious minds eager to transform and advance the world around them. Just as the Wright brothers... making great progress in ushering in a new commercial space industry that can help boost our economy...

Looking and Learning: The Solomon R. Guggenheim Museum, Frank Lloyd Wright

Science.gov (United States)

Vatsky, Sharon

2007-01-01

Frank Lloyd Wright was born and raised on the farmlands of Wisconsin. His mother had a vision that her son would become a great architect. Wright was raised with strong guiding principles, a love of nature, a belief in the unity of all things, and a respect for discipline and hard work. He created the philosophy of "organic architecture," which…

Intertwining of the Wright-Fisher diffusion

Czech Academy of Sciences Publication Activity Database

Hudec, Tobiáš

2017-01-01

Roč. 53, č. 4 (2017), s. 730-746 ISSN 0023-5954 Institutional support: RVO:67985556 Keywords : Intertwining of Markov processes * Wright-Fisher diffusion * pure birth process Subject RIV: BA - General Mathematics OBOR OECD: Statistics and probability Impact factor: 0.379, year: 2016 http://library.utia.cas.cz/separaty/2017/SI/hudec-0481495.pdf

Demographic monitoring of Wright fishhook cactus

Science.gov (United States)

Ronald J. Kass

2001-01-01

Wright fishhook cactus (Sclerocactus wrightiae Benson) is a small barrel cactus endemic to the San Rafael Swell in south-central Utah. It was listed as an endangered species in 1979 due to its small population size, threats of over-collecting, and development associated with oil and gas. Demographic monitoring was initiated in 1993 with the following objectives: to...

Wilbur and Orville Wright: A Bibliography Commemorating the One-Hundredth Anniversary of the First Powered Flight, December 17, 1903. Revised

Science.gov (United States)

Renstrom, Arthur G. (Compiler); Goldblatt, Roberta W.; Minkus, Carl; Berube, Karen L.; Launius, Roger (Technical Monitor)

2002-01-01

This annotated bibliography of material about Wilbur and Orville Wright and the first powered flight, commemorates the one hundredth anniversary of the event. This publication represents an updated version of the classic, "Wilbur and Orville Wright: A Bibliography Commemorating the Hundredth Anniversary of the Birth of Wilbur Wright, April 16, 1867" which was originally published in 1968. Aspects of the Wright brothers' lives covered include: their published writings, biographical references, airplanes used and flight records, airplane components, patents, court records, Wright companies and schools, the Wright-Smithsonian controversy, monuments and museums, memorials, medals and honors, memorabilia, art, poetry, music, motion pictures and juvenile publications. An index is included.

Challenges of Enterprise Wide AM for Air Force Sustainment

Science.gov (United States)

2016-12-01

processes for AM across the Air Force enterprise. The opportunity for cost-effective readiness is important, and using a value chain approach that takes...December 2016 Naguy is chief of the Air Force Life Cycle Management Center’s Product Support Engineering Division at Wright Patterson Air Force Base in...produc- tion that can address many current Air Force supply chain challenges. It also can reduce weight through lightweight design while potentially

Single and simultaneous binary mergers in Wright-Fisher genealogies.

Science.gov (United States)

Melfi, Andrew; Viswanath, Divakar

2018-05-01

The Kingman coalescent is a commonly used model in genetics, which is often justified with reference to the Wright-Fisher (WF) model. Current proofs of convergence of WF and other models to the Kingman coalescent assume a constant sample size. However, sample sizes have become quite large in human genetics. Therefore, we develop a convergence theory that allows the sample size to increase with population size. If the haploid population size is N and the sample size is N 1∕3-ϵ , ϵ>0, we prove that Wright-Fisher genealogies involve at most a single binary merger in each generation with probability converging to 1 in the limit of large N. Single binary merger or no merger in each generation of the genealogy implies that the Kingman partition distribution is obtained exactly. If the sample size is N 1∕2-ϵ , Wright-Fisher genealogies may involve simultaneous binary mergers in a single generation but do not involve triple mergers in the large N limit. The asymptotic theory is verified using numerical calculations. Variable population sizes are handled algorithmically. It is found that even distant bottlenecks can increase the probability of triple mergers as well as simultaneous binary mergers in WF genealogies. Copyright © 2018 Elsevier Inc. All rights reserved.

Measuring Lift with the Wright Airfoils

Science.gov (United States)

Heavers, Richard M.; Soleymanloo, Arianne

2011-01-01

In this laboratory or demonstration exercise, we mount a small airfoil with its long axis vertical at one end of a nearly frictionless rotating platform. Air from a leaf blower produces a sidewise lift force L on the airfoil and a drag force D in the direction of the air flow (Fig. 1). The rotating platform is kept in equilibrium by adding weights…

Air Force Research Laboratory Wright Site Guide to Technical Publishing

Science.gov (United States)

2005-04-01

Restrictions Text that protects ownership rights. Errata Text that identifies errors in the printed document. Typography Description of the...charts, photographs, embedded videos, and text.) Abstract Accomplishment Report Briefing Charts Brochure Digital Image /Photo Display/exhibit

76 FR 79019 - Wright Brothers Day, 2011

Science.gov (United States)

2011-12-20

... with earnings from their bicycle shop, gathering data on wing shape using a home-built wind tunnel and... the Wright brothers over a century ago. To reaffirm our role as the engine that drives science and..., must we press onward, exploring new frontiers of science, technology, and imagination in pursuit of a...

78 FR 76969 - Wright Brothers Day, 2013

Science.gov (United States)

2013-12-19

... champion STEM education in their communities. As we remember the Wright brothers, let us not forget another... results. That is why my Administration is dedicated to improving education in the vital fields of science... underrepresented groups, and through Race to the Top, we are raising standards and making STEM education a priority...

A "Smart" Force-Limiting Instrument for Microsurgery: Laboratory and In Vivo Validation.

Directory of Open Access Journals (Sweden)

Hani J Marcus

Full Text Available Residents are required to learn a multitude of skills during their microsurgical training. One such skill is the judicious application of force when handling delicate tissue. An instrument has been developed that indicates to the surgeon when a force threshold has been exceeded by providing vibrotactile feedback. The objective of this study was to validate the use of this "smart" force-limiting instrument for microsurgery. A laboratory and an in vivo experiment were performed to evaluate the force-limiting instrument. In the laboratory experiment, twelve novice surgeons were randomly allocated to use either the force-limiting instrument or a standard instrument. Surgeons were then asked to perform microsurgical dissection in a model. In the in vivo experiment, an intermediate surgeon performed microsurgical dissection in a stepwise fashion, alternating every 30 seconds between use of the force-limiting instrument and a standard instrument. The primary outcomes were the forces exerted and the OSATS scores. In the laboratory experiment, the maximal forces exerted by novices using the force-limiting instrument were significantly less than using a standard instrument, and were comparable to intermediate and expert surgeons (0.637N versus 4.576N; p = 0.007. In the in vivo experiment, the maximal forces exerted with the force-limiting instrument were also significantly less than with a standard instrument (0.441N versus 0.742N; p 0.1. In conclusion, the development and use of this force-limiting instrument in a clinical setting may improve patient safety.

The Wright Brothers and their First Flight

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 8; Issue 12. The Wright Brothers and their First Flight. O N Ramesh. Article-in-a-Box Volume 8 Issue 12 December 2003 pp 3-4. Fulltext. Click here to view fulltext PDF. Permanent link: https://www.ias.ac.in/article/fulltext/reso/008/12/0003-0004 ...

Renormalization analysis of catalytic Wright-Fisher diffusions

Czech Academy of Sciences Publication Activity Database

Swart, Jan M.; Fleischmann, K.

2006-01-01

Roč. 2006, č. 11 (2006), s. 585-654 ISSN 1083-6489 R&D Projects: GA ČR GA201/06/1323 Institutional research plan: CEZ:AV0Z10750506 Keywords : renormalization * catalytic Wright-Fisher diffusion * embedded particle system * extinction * unbounded growth * interacting diffusions * universality Subject RIV: BA - General Mathematics Impact factor: 0.676, year: 2006

Er: YLF Laser Development

Science.gov (United States)

1975-12-01

Force Wright Aeronautical Laboratory, AFAL/DHO, Wright-Patterson AFB, OH 45433. WL/AFSC( IST ) ltr, 12 Apr 1991 UNCLASSIFIED AD NUMBER LIMITATION CHANGES TO...ju^i^zs.^iu •Lbbrtbataafetiu.*. i ! mtotfffiflaiai WP1— 1 ’ »■■■«I HIU I I .1 III ll.lll. VIH IWII

Electrically Reconfigurable Liquid Crystalline Mirrors (Postprint)

Science.gov (United States)

2018-04-24

focus on dynamic reconfiguration of the reflection band gap of polymer-stabilized cholesteric liquid crystals (PSCLCs). Recent research has reported the...public release: distribution unlimited. © 2018 AMERICAN CHEMICAL SOCIETY (STINFO COPY) AIR FORCE RESEARCH LABORATORY MATERIALS AND MANUFACTURING...MONITORING AGENCY ACRONYM(S) Air Force Research Laboratory Materials and Manufacturing Directorate Wright-Patterson Air Force Base, OH

Laboratory versus industrial cutting force sensor in tool condition monitoring system

International Nuclear Information System (INIS)

Szwajka, K

2005-01-01

Research works concerning the utilisation of cutting force measures in tool condition monitoring usually present results and deliberations based on laboratory sensors. These sensors are too fragile to be used in industrial practice. Industrial sensors employed on the factory floor are less accurate, and this must be taken into account when creating a tool condition monitoring strategy. Another drawback of most of these works is that constant cutting parameters are used for the entire tool life. This does not reflect industrial practice where the same tool is used at different feeds and depths of cut in sequential passes. This paper presents a comparison of signals originating from laboratory and industrial cutting force sensors. The usability of the sensor output was studied during a laboratory simulation of industrial cutting conditions. Instead of building mathematical models for the correlation between tool wear and cutting force, an FFBP artificial neural network was used to find which combination of input data would provide an acceptable estimation of tool wear. The results obtained proved that cross talk between channels has an important influence on cutting force measurements, however this input configuration can be used for a tool condition monitoring system

The Wright Science Colloquia Entering the Nano-World

CERN Multimedia

2002-01-01

In 1965, Intel co-founder Gordon Moore made an astonishing prediction - that every two years processing power would double. This prediction has always proved accurate. Accordingly, the first Intel processor produced in 1975 was equipped with 2,300 transistors whereas the latest edition has 55 million. Today we have this extraordinary process of miniaturisation to thank for cell phones, computers and other, ever more compact electronic marvels. But where will the miniaturisation race end? What will happen when electronic etchings reach the size of an atom? These questions are on the programme of the 10th Wright Science Colloquia from 18 to 22 November. Five world-renowned specialists will explain to the general public the saga of miniaturisation. The Wright Colloquia take place every two years in Geneva and aim to inform the general public about the latest advances in science.   Monday 18 November: 'Shaping the World at the Atomic Scale', by Donald Eigler, IBM, Almaden, USA.   Tuesday 19...

Passion play: Will Wright and games for science learning

Science.gov (United States)

Ching, Dixie

2012-12-01

Researchers and instructional designers are exploring the possibilities of using video games to support STEM education in the U.S., not only because they are a popular media form among youth, but also because well-designed games often leverage the best features of inquiry learning. Those interested in using games in an educational capacity may benefit from an examination of the work of video game designer Will Wright. Wright designs through a constructivist lens and his open-ended, sandbox games ( SimCity, The Sims, Spore) present wide "possibility spaces" that allow players to exercise their critical thinking and problem solving skills. His games invoke a delight in discovery that inspire creative acts and interest-driven learning both during and outside of the game. Finally, he reminds us that failure-based learning is a viable strategy for building expertise and understanding.

Utilizing a Rapid Prototyping Approach in the Building of a Hypermedia-Based Reference Station.

Science.gov (United States)

Sell, Dan

This paper discusses the building of a hypermedia-based reference station at the Wright Laboratory Technical Library, Wright-Patterson Air Force Base, Ohio. Following this, the paper focuses on an electronic user survey from which data is collected and analysis is made. The survey data is used in a rapid prototyping approach, which is defined as…

Large-scale laboratory observations of wave forces on a highway bridge superstructure.

Science.gov (United States)

2011-10-01

The experimental setup and data are presented for a laboratory experiment conducted to examine realistic wave forcing on a highway bridge : superstructure. The experiments measure wave conditions along with the resulting forces, pressures, and struct...

The Holiversity. A Perspective on the Wright Report.

Science.gov (United States)

Adelman, Howard

After a decade of almost unlimited funds, the universities in Ontario are faced not only with declining enrollments but with an attack on their very function and role. The Wright Report, the final version of the Report of the Commission on Post-Secondary Education in Ontario, appeared early in 1973. It has engendered major controversy, and its…

Status Report of the Inter-Laboratory Task Force on Remote Operation

Energy Technology Data Exchange (ETDEWEB)

Phinney, Nan

2001-12-13

The next generation of particle accelerators will be major projects which may require a new mode of international and inter-laboratory collaboration. They are likely to be too costly to be funded by a single nation and too large to be built by a single laboratory. The tremendous technical challenge of a new facility requires a critical mass of highly qualified and experienced physicists and engineers. These experts are presently distributed among the major accelerator centers around the world and it is believed important to maintain and develop this broad base of expertise. The successful accelerator technology development of recent decades depended on extensive exchange of people with complementary technical skills. Therefore, it is desirable and probably necessary that several accelerator laboratories will participate in any future project. A consequence of a multi-laboratory project is that the accelerator will be located a considerable distance from most of the contributing institutions which design, build and operate it. These considerations led the International Committee for Future Accelerators to initiate a study on the general and technical implications of such a collaboration. Two task forces were formed in February 2000 to conduct this study and they were asked to prepare a report on a time scale of one year. The task force on Remote Operation included members from most of the major accelerator laboratories around the world with expertise on accelerator operation, controls software, communication technologies, hardware design and maintenance. The task force members gathered information from the experts at their own institutions and from available experience in other fields, particularly astronomy.

"Ingraham v. Wright" and the Decline of Due Process.

Science.gov (United States)

Clark, Gerard J.

1978-01-01

Suggests that the constitutional questions in "Ingraham vs Wright" lend credence to a concern that the Court is seeking to eliminate all due process intervention outside of the incorporation and privacy cases and to limit even these cases to defenses of a criminal prosecution. Available from Suffolk University Law Review Office, 41…

Integrated Life-Cycle Framework for Maintenance, Monitoring and Reliability of Naval Ship Structures

Science.gov (United States)

2012-08-15

uncertainty in quantitative risk and policy analysis, Cambridge Univer- sity Press. NEVES, L. C, FRANGOPOL, D. M., AND CRUZ , P. J. 2006 Probabilistic lifetime...L. C, FRANGOPOL, D. M., AND CRUZ , P. J. 2006 Probabilistic life- time-oriented multiobjective optimization of bridge maintenance: single...Wright Aeronautical Laboratory. Wright- Patterson Air Force Base, Dayton, Ohio; 1981. [5| Chung H-Y, Manuel L, Frank KH. Optimal inspection

Religious Literacy or Spiritual Awareness? Comparative Critique of Andrew Wright's and David Hay's Approaches to Spiritual Education

Science.gov (United States)

Filipsone, Anta

2009-01-01

On the basis of a comparison of the educational approaches of Andrew Wright and David Hay this paper illustrates the persisting problem of dichotomising cognitive and trans-cognitive aspects of spiritual development and education. Even though both Wright and Hay speak of the same topic--spirituality and spiritual education--they define these terms…

Status Report of the Inter-Laboratory Task Force on Remote Operation

International Nuclear Information System (INIS)

Phinney, Nan

2001-01-01

The next generation of particle accelerators will be major projects which may require a new mode of international and inter-laboratory collaboration. They are likely to be too costly to be funded by a single nation and too large to be built by a single laboratory. The tremendous technical challenge of a new facility requires a critical mass of highly qualified and experienced physicists and engineers. These experts are presently distributed among the major accelerator centers around the world and it is believed important to maintain and develop this broad base of expertise. The successful accelerator technology development of recent decades depended on extensive exchange of people with complementary technical skills. Therefore, it is desirable and probably necessary that several accelerator laboratories will participate in any future project. A consequence of a multi-laboratory project is that the accelerator will be located a considerable distance from most of the contributing institutions which design, build and operate it. These considerations led the International Committee for Future Accelerators to initiate a study on the general and technical implications of such a collaboration. Two task forces were formed in February 2000 to conduct this study and they were asked to prepare a report on a time scale of one year. The task force on Remote Operation included members from most of the major accelerator laboratories around the world with expertise on accelerator operation, controls software, communication technologies, hardware design and maintenance. The task force members gathered information from the experts at their own institutions and from available experience in other fields, particularly astronomy. The task force on Remote Operations began by developing a model for an international multi-laboratory collaboration to construct and operate an accelerator facility. This model is described in section 3. While it is clear that there are numerous alternative

A Policy Analysis of Using Unit Costs as a Means of Performance Measurement in the Air Force Science and Technology Program

Science.gov (United States)

1991-09-01

demonstrate, is that there is more than one way to account for S &T costs and evaluate its program performance. The first option evaluated considers...Personal Communication. Wright Laboratory, Wright-Patterson AFB OH, 14 May 1991. Horngren , Charles T. and George Foster. Cost Accounting A Managerial...78 Programmatic Feedback ........ 79 S &T as Overhead............79 Scoring the Options............80 Unit Costs ................8 Programmatic

Scientific Research Program for Power, Energy, and Thermal Technologies. Task Order 0001: Power, Thermal and Control Technologies and Processes Experimental Research

Science.gov (United States)

2015-08-01

a variable-speed screw compressor (Fairchild Controls Corporation) controlled by a Yaskawa A-1000 motor drive. Screw compressors are appropriate...public release; distribution unlimited. See additional restrictions described on inside pages STINFO COPY AIR FORCE...RESEARCH LABORATORY AEROSPACE SYSTEMS DIRECTORATE WRIGHT-PATTERSON AIR FORCE BASE, OH 45433-7541 AIR FORCE MATERIEL COMMAND UNITED STATES AIR FORCE

Artificial intelligence within AFSC

Science.gov (United States)

Gersh, Mark A.

1990-01-01

Information on artificial intelligence research in the Air Force Systems Command is given in viewgraph form. Specific research that is being conducted at the Rome Air Development Center, the Space Technology Center, the Human Resources Laboratory, the Armstrong Aerospace Medical Research Laboratory, the Armamant Laboratory, and the Wright Research and Development Center is noted.

Richard Wright, Toni Morrison, and United States book clubs

Directory of Open Access Journals (Sweden)

Mark Madigan

2004-12-01

Full Text Available This essay focuses on the influence of commercial book clubs in the United States. It will examine the country's oldest commercial book club, the Book-of-the-Month Club (BOMC, Oprah's Book Club (OBC, which bears the name of its founder, television personality Oprah Winfrey, and their roles in the careers of two African-American authors, Richard Wright and Toni Morrison.

The dangers of eating away from home: review | Wright | South ...

African Journals Online (AJOL)

The dangers of eating away from home: review. JP Wright. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and ...

Summer Research Program - 1996 High School Apprenticeship Program Volume 15A Wright Laboratory

National Research Council Canada - National Science Library

Moore, Gary

1996-01-01

The United States Air Force Summer Research Program (USAF-SRP) is designed to introduce university, college, and technical institute faculty members, graduate students, and high school students to Air Force research...

Summer Research Program - 1998 High School Apprenticeship Program Volume 15C Wright Laboratory

National Research Council Canada - National Science Library

Moore, Gary

1998-01-01

The United States Air Force Summer Research Program (USAF-SRP) is designed to introduce university, college, and technical institute faculty members, graduate students, and high school students to Air Force research...

Summer Research Program - 1998 High School Apprenticeship Program Volume 15B Wright Laboratory

National Research Council Canada - National Science Library

Moore, Gary

1998-01-01

The United States Air Force Summer Research Program (USAF-SRP) is designed to introduce university, college, and technical institute faculty members, graduate students, and high school students to Air Force research...

Effects of the Ordering of Natural Selection and Population Regulation Mechanisms on Wright-Fisher Models.

Science.gov (United States)

He, Zhangyi; Beaumont, Mark; Yu, Feng

2017-07-05

We explore the effect of different mechanisms of natural selection on the evolution of populations for one- and two-locus systems. We compare the effect of viability and fecundity selection in the context of the Wright-Fisher model with selection under the assumption of multiplicative fitness. We show that these two modes of natural selection correspond to different orderings of the processes of population regulation and natural selection in the Wright-Fisher model. We find that under the Wright-Fisher model these two different orderings can affect the distribution of trajectories of haplotype frequencies evolving with genetic recombination. However, the difference in the distribution of trajectories is only appreciable when the population is in significant linkage disequilibrium. We find that as linkage disequilibrium decays the trajectories for the two different models rapidly become indistinguishable. We discuss the significance of these findings in terms of biological examples of viability and fecundity selection, and speculate that the effect may be significant when factors such as gene migration maintain a degree of linkage disequilibrium. Copyright © 2017 He et al.

Learning to Fly: The Wright Brothers' Adventure. A Guide for Educators and Students with Activities in Aeronautics

Science.gov (United States)

Storm, R.; Benson, T.; Galica, C.; McCredie, P.

2003-01-01

This guide was produced by the NASA Glenn Research Center Office of Educational Programs in Cleveland, OH, and the NASA Aerospace Educational Coordinating Committee. It includes activity modules for students, including the history of the Wright Brothers and their family in Dayton, Ohio and flight experimentation in Kitty Hawk, North Carolina. Student activities such as building models of the Wright Brothers glider and writing press releases of the initial flight are included.

Theories that narrate the world: Ronald A. Fisher's mass selection and Sewall Wright's shifting balance.

Science.gov (United States)

Rosales, Alirio

2017-04-01

Theories are composed of multiple interacting components. I argue that some theories have narratives as essential components, and that narratives function as integrative devices of the mathematical components of theories. Narratives represent complex processes unfolding in time as a sequence of stages, and hold the mathematical elements together as pieces in the investigation of a given process. I present two case studies from population genetics: R. A. Fisher's "mas selection" theory, and Sewall Wright's shifting balance theory. I apply my analysis to an early episode of the "R. A. Fisher - Sewall Wright controversy." Copyright © 2017 Elsevier Ltd. All rights reserved.

Wright Science Colloquium 2004

CERN Document Server

2004-01-01

"Stem cells and regenerative medicine. Living a longer life?" For the first time in history, human beings are in a position to modify their own biological fate. This is due to the past 20 years of basic research in life sciences, which have led to discoveries of great impact, not only on our scientific knowledge, but also on a variety of domains outside science itself. Our society is disconcerted by this biological revolution and the underlying instrumentalisation of human beings. Therefore, it is the right time to think about these extraordinary developments, to know where we stand and to try to imagine the future, in order to foresee both the benefits and the dangers of what will unavoidably occur. From 15 to 19 November, the XIth edition of the Colloquia Wright that are held every two years in Geneva with the aim of presenting the latest scientific findings to the general public, will deal with this new and difficult question for the society. Five world-famous scientists will present lectures every da...

Wright Science Colloquium 2004

CERN Multimedia

2004-01-01

"Stem cells and regenerative medicine. Living a longer life?" For the first time in history, human beings are in a position to modify their own biological fate. This is due to the past 20 years of basic research in life sciences, which have led to discoveries of great impact, not only on our scientific knowledge, but also on a variety of domains outside science itself. Our society is disconcerted by this biological revolution and the underlying instrumentalisation of human beings. Therefore, it is the right time to think about these extraordinary developments, to know where we stand and to try to imagine the future, in order to foresee both the benefits and the dangers of what will unavoidably occur. From 15 to 19 November, the XIth edition of the Colloquia Wright that are held every two years in Geneva with the aim of presenting the latest scientific findings to the general public, will deal with this new and difficult question for the society. Five world-famous scientists will present lectures every...

Digital Documentation of Frank Lloyd Wright's Masterpiece, Fallingwater

Science.gov (United States)

Jerome, P.; Emilio, D.

2017-08-01

Since 1988, the professional staff of Architectural Preservation Studio (APS) has been involved with the conservation of Frank Lloyd Wright's Fallingwater in Mill Run, PA. Designed and erected from 1935 to 1939 as a weekend home for the Kauffman family, the complex consists of the main house and guest house. After five years of reports and prototype repairs, we produced a two-volume master plan. Using original Frank Lloyd Wright drawings from Avery Library as background drawings, we measured every surface and reproduced the drawings in CAD, also developing elevations of every room. Stone-by-stone drawings of every flagstone floor and terrace scheduled to be lifted were also created using overlapping film photography that was assembled into a photo mosaic. By 2005, we designed, administered and completed a four-phase exterior restoration, with the paint-stripping and repainting of interior rooms being performed during the brief winter period when the building is closed to the public on an ongoing basis. In 2016, we were invited back to the site to review conditions and advise on routine maintenance. At that time we proposed to re-document the buildings, this time using laser-scanning. Laser-scanning of the exterior was performed in May of 2016, and of the interior in March 2017, each over the course of four days. This paper will make a comparison between manual and digital techniques in terms of Fallingwater's documentation.

Formation of the U.S. Air Force Aviator Post Traumatic Stress Disorder Study Group

Science.gov (United States)

2016-11-15

Wood, III, John Heaton, Mark Hubner, Nicole Rhodes 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION... Questionnaire -9 PIQ performance intelligence quotient PTSD post-traumatic stress disorder RPA remotely piloted aircraft USAF U.S. Air Force VIQ verbal intelligence quotient ...Human Performance Wing U.S. Air Force School of Aerospace Medicine Aerospace Medicine Department 2510 Fifth St., Bldg. 840 Wright-Patterson AFB, OH

Rehabilitation R@D Progress Reports, 1992-1993. Volume 30-31

Science.gov (United States)

1993-01-01

Armstrong Laboratory AL/CFBS, Wright Patterson Air Force Base, Dayton, OH 45433; School of Biomedical and Human Factors Engineering, Wright State...Ruth Gannon, MS; Herbert Andrew Leeper, PhD; Nancy Thomas-Stonell, BSc, DSP; Philip Doyle, PhD; Morris Milner, PhD; Ava-Lee Kotler , MSc Hugh MacMillan...Korres E 281 Kotler A 289 Kozak K 213 Kraft MR 371 Krag MH 216 Krajbich I 35 Kralj A 86 Krick H 8 481 Author Index Krouskop T 176 Kula J 215

Sewall Wright's equation Deltaq=(q(1-q) partial differentialw/ partial differentialq)/2w.

Science.gov (United States)

Edwards, A W

2000-02-01

An equation of Sewall Wright's expresses the change in the frequency of an allele under selection at a multiallelic locus as a function of the gradient of the mean fitness "surface" in the direction in which the relative proportions of the other alleles do not change. An attempt to derive this equation using conventional vector calculus shows that this description leads to a different equation and that the purported gradient in Wright's equation is not a gradient of the mean fitness surface except in the diallelic case, where the two equations are the same. It is further shown that if Fisher's angular transformation is applied to the diallelic case the genic variance is exactly equal to one-eighth of the square of the gradient of the mean fitness with respect to the transformed gene frequency. Copyright 2000 Academic Press.

CLARKE AND WRIGHT SAVING ALGORITHM AS A MEANS OF DISTRIBUTION STREAMLINING IN THE ENVIRONMENT OF A CONCRETE COMPANY

Directory of Open Access Journals (Sweden)

Martin Straka

2015-03-01

Full Text Available Reducing costs forces of companies to look for reserves also in field of management, support and implementation of material flow. This is connected with the optimization of costs for product distribution, which forms a significant part of the total cost of the company. In practice, it happens that making plans for distribution of materials within a distribution space is left solely to the implementers of distribution and it drivers of vehicles. As a result is uneconomic material distribution and unnecessary cost increases to his distribution. The objective of the paper is to propose a methodology for optimization of transport planning from DC Prešov to the individual Tesco units within the region that comes under this distribution centre. The methodology is based on the Clarke and Wright saving algorithm.

2017 Annual Terrestrial Sampling Plan for Sandia National Laboratories/New Mexico on Kirtland Air Force Base

Energy Technology Data Exchange (ETDEWEB)

Griffith, Stacy R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-02-01

The 2017 Annual Terrestrial Sampling Plan for Sandia National Laboratories/New Mexico on Kirtland Air Force Base has been prepared in accordance with the “Letter of Agreement Between Department of Energy, National Nuclear Security Administration, Sandia Field Office (DOE/NNSA/SFO) and 377th Air Base Wing (ABW), Kirtland Air Force Base (KAFB) for Terrestrial Sampling” (signed January 2017), Sandia National Laboratories, New Mexico (SNL/NM). The Letter of Agreement requires submittal of an annual terrestrial sampling plan.

2018 Annual Terrestrial Sampling Plan for Sandia National Laboratories/New Mexico on Kirtland Air Force Base.

Energy Technology Data Exchange (ETDEWEB)

Griffith, Stacy R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2018-01-01

The 2018 Annual Terrestrial Sampling Plan for Sandia National Laboratories/New Mexico on Kirtland Air Force Base has been prepared in accordance with the “Letter of Agreement Between Department of Energy, National Nuclear Security Administration, Sandia Field Office (DOE/NNSA/SFO) and 377th Air Base Wing (ABW), Kirtland Air Force Base (KAFB) for Terrestrial Sampling” (signed January 2017), Sandia National Laboratories, New Mexico (SNL/NM). The Letter of Agreement requires submittal of an annual terrestrial sampling plan.

A Study of Facilities and Infrastructure Planning, Prioritization, and Assessment at Federal Security Laboratories (Revised)

Science.gov (United States)

2013-02-01

Engineer Support Agency Air Force Real Property Agency Wright-Patterson Air Force Base (AFB), OH; Kirtland AFB, New Mexico ; Eglin AFB, Florida...emergency response to their site. • Sandia works with the State of New Mexico Finance Authority to finance the development of a new facility...algorithms specific to an F&I type to generate the modernization requirement based on Replacement Plant Value, depreciation , expected service life, and

Jet Fuel Exacerbated Noise-Induced Hearing Loss: Focus on Prediction of Central Auditory Processing Dysfunction

Science.gov (United States)

2017-09-01

standard deviation). 4.3.3 Lipid Class Determination for Partition Coefficient Prediction. Research was conducted on methods to quantify...Advancement of Military Medicine Aeromedical Research Department United States Air Force School of Aerospace Medicine Wright-Patterson AFB OH...Report for Oct 2015 to Mar 2017 Air Force Research Laboratory 711th Human Performance Wing Airman Systems Directorate Bioeffects Division

Ecopoetic Encounters: Amnesia and Nostalgia in Alexis Wright's Environmental Fiction

OpenAIRE

Barras Arnaud

2015-01-01

In Carpentaria (2006) and The Swan Book (2013), Alexis Wright establishes an allegorical mode where she reimagines Europeans' first encounters with Australia from an Aboriginal environmental perspective. In this narrative system, the discovery of Australia is not realised by exploring colonisers, but by vulnerable strangers who apprehend the continent both experientially and linguistically. In Carpentaria, the Stranger-figure of Elias Smith is left amnesic after surviving a shipwreck during a...

The portrait of a prophet – why is Wright not right about Jesus?

African Journals Online (AJOL)

p1243322

suited to describe the portrait of Jesus emanating from the sources at hand. He furthermore .... Wright maintains that Jesus retold Israel's story, both explicitly and implicitly, as ..... of which were engraved in the palms of their hands. To reduce ...

LA ESTRUCTURA ORGÁNICA EN LOS RASCACIELOS DE FRANK LLOYD WRIGHT / The organic structure in the skyscrapers of Frank Lloyd Wright

Directory of Open Access Journals (Sweden)

Alfonso Diaz Segura, Ricardo Meri de la Maza, Bartolomé Serra Soriano

2013-05-01

Full Text Available RESUMEN La estructura de la modernidad, en general, está al servicio de una nueva concepción espacial fluida y continua, condensada en torno al concepto de “planta libre”. Sin embargo, la riqueza y complejidad de articulación que adquieren las plantas, no se observa en la sección de los edificios, especialmente si se trata de rascacielos. El principio de crecimiento por superposición de plantas iguales y el carácter utilitario de la estructura en esta tipología, anularon su carácter iconográfico y su integración espacial. Frank Lloyd Wright, de modo natural, desarrolla una estructura para sus escasos rascacielos que integra espacio y forma, superando así tanto la simplificación funcional de la Escuela de Chicago, como el valor iconográfico de las experiencias europeas.SUMMARY In general, the structure of modernity serves a new, fluid and continuous, spatial conception, condensed around the “free floor” concept. However, the wealth and complexity of articulation that these floors acquire are not seen in the section of the buildings, especially in the case of skyscrapers. The principle of growth by superimposition of equal floors and the utilitarian character of the structure in this type of building, nullify the iconographic character of the structure and its spatial integration. Frank Lloyd Wright develops a structure for his few skyscrapers that integrates space and form in a natural way, thus surpassing both the functional simplification of the Chicago School, and the iconographic value of the European experiences.

Invertendo a “Passagem Atlântica”: O “regresso” de Richard Wright a África

Directory of Open Access Journals (Sweden)

Ana Luísa Saraiva

2012-10-01

Full Text Available O texto discute o sentido polémico do “regresso” a África que Richard Wright inscreve em Black Power e a forma como a narrativa da viagem subverte a “Middle Passage”. O sujeito narrativo orienta o leitor através de uma incursão pessoal nos muitos sentidos da modernidade e desdobra a noção de “destino comum”, já apontada em 12 Million Black Voices. Contudo, qualquer sentido de comunidade é aqui necessariamente ambíguo, por estar sempre relacionado com questões de raça e identidade. Black Power é uma narrativa importante para o conceito de modernidade e assinala uma mudança significativa na produção literária de Wright para uma vertente não-ficcional. Esta segunda fase da sua obra contém, no entanto, um paradoxo crucial: enquanto se volta para o exterior, para o mundo mais global, Wright tenta, simultaneamente, inscrever-se como referência sobre o locus do qual nunca poderia demarcar‑se: África. Em Black Power, a duboisiana “color line” desdobra‑se em múltiplas dimensões.

Measurements of cutter forces and cutter temperature of boring machine in Aespoe Hard Rock Laboratory

Energy Technology Data Exchange (ETDEWEB)

Zhang, Z.X.; Kou, S.Q.; Lindqvist, P.-A. [Luleaa Univ. of Technology (Sweden)

2001-04-01

This report presents both the testing methods used and the testing results obtained for cutter forces and cutter temperature during field boring in Aespoe Hard Rock Laboratory. In order to estimate the strains induced by cutter forces in the cutter shaft and choose proper transducers, first a numerical simulation was performed. The simulation results indicated that the cutter forces should be measurable by ordinary strain gauges. Furthermore, an independent three-direction loading system for laboratory calibration was set up to solve force-coupling problems appearing in field measurements. By means of the established measuring system, which was proved successfully in the laboratory, the normal forces, tangential forces, and side forces of two button cutters in the boring machine were measured in the field. In addition, the temperature in the shaft of the front cutter was measured. After the measurements of the cutter forces and cutter temperature, rock core samples were taken from the bottom and the wall of the testing borehole. Then the samples were cut, polished, and examined by means of the Scanning Electron Microscope (SEM). After that, the lengths of major cracks induced by the cutters in the rock samples were measured, and an approximate relationship between the length of the medium cracks and the relevant cutter forces was obtained. This relationship was compared with the theoretical relationship established before. Finally, according to the measured results, the cracked zones around the borehole were described. The results show that: (1) there are two kinds of cracked zones: one in the borehole wall and the other in the bottom of the borehole. The depth of the cracked zone in the borehole bottom is much larger than that in the borehole wall because the maximum normal force of the front cutter is always much larger than that of the gauge cutter. (2) Each cracked zone includes a densely cracked zone and all the longest medium cracks caused by mechanical

Cholesteric Liquid Crystal Glass Platinum Acetylides

Science.gov (United States)

2014-06-01

M. Krein AFRL/RXAP Ronald F. Ziolo, Eduardo Arias, and Ivana Moggio 2Centro de Investigacion en Quimica Aplicada(CIQA) Albert Fratini... Quimica Aplicada(CIQA), Boulevard Enrique Reyna Albert Fratini - Department of Chemistry, University of Dayton Yuriy Garbovskiy and Anatoliy...Force Research Laboratory Materials and Manufacturing Directorate Wright-Patterson Air Force Base, OH 45433-7750 Centro de Investigacion en Quimica

76 FR 1211 - Union Pacific Railroad Company-Abandonment Exemption-In Wright County, IA

Science.gov (United States)

2011-01-07

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. AB 33 (Sub-No. 293X)] Union Pacific Railroad Company--Abandonment Exemption--In Wright County, IA Union Pacific Railroad Company (UP) filed a verified notice of exemption under 49 CFR 1152 subpart F--Exempt Abandonments to abandon a line...

Neuroblastoma - remembering the three physicians who described it a century ago: James Homer Wright, William Pepper, and Robert Hutchison

International Nuclear Information System (INIS)

Rothenberg, Alexis B.; Berdon, Walter E.; D'Angio, Giulio J.; Yamashiro, Darrell J.; Cowles, Robert A.

2009-01-01

Neuroblastoma is often widespread at the time of diagnosis. Three physicians between 1900 and 1910 played an important role in the pathologic definition of neuroblastoma and its route of spread in relation to the age of the patient. These findings eventually led to the advances in treatment and decreased morbidity of today. In 1910 James Homer Wright was the first to recognize the tumor as being of primitive neural cell origin, calling it neuroblastoma and emphasizing the bundle of cells termed rosettes. While Wright recognized the neural nature of the tumor, the authors of previous reports had described its two distinct patterns of spread. In 1901 William Pepper published a series of infants with massive hepatic infiltration associated with adrenal tumors without spread to bone, and in 1907 Robert Grieve Hutchison reported his experience with a similar pathologic process in older infants and children who had orbital and skull metastases. Wright's valuable unifying concept served to tie together the descriptions of Pepper and Hutchison. A century later the names of these physicians should be remembered - Wright, who defined the adrenal tumor as of primitive neural origin, Pepper for his clinically accurate report of massive liver involvement in the infant, and Hutchison for describing the propensity of the tumor to spread to bone in older children. (orig.)

Air Force Research Laboratory Success Stories. A Review of 2003

Science.gov (United States)

2003-01-01

or non-NBC mode. The ECU can act as either a heater or an air conditioner and can be operated with a remote control. Compared to previous models...separation system, PSC is developing a motorized activation mechanism. Once completed, this will allow for virtually unlimited testing of the actual...stories in this book or on the CD-ROM, or for other technical activities in the Air Force Research Laboratory, contact TECH CONNECT at (800) 203-6451

Ergonomic and anthropometric issues of the forward Apache crew station

NARCIS (Netherlands)

Oudenhuijzen, A.J.K.

1999-01-01

This paper describes the anthropometric accommodation in the Apache crew systems. These activities are part of a comprehensive project, in a cooperative effort from the Armstrong Laboratory at Wright Patterson Air Force Base (Dayton, Ohio, USA) and TNO Human Factors Research Institute (TNO HFRI) in

United States Air Force Summer Research Program -- 1993. Volume 5A. Wright Laboratory

Science.gov (United States)

1993-12-01

of magnitude as the mean free path. for practical probe sizes. hho and P’, are therefore large numbers. In experiment planning. the essential...asymmetric photoelectron emission from defect sites," Opt. Lett. 16, 796-798 (1991). 21. V. L. Vinetskii, N. V. Kukhtarev, S. G. Odulov, and M. S. Soskin...significant amount of plastic yielding. Since the acoustic emission bursts correspond mainly to fiber fracture, Roman et al (1993), it is seen that fiber

United States Air Force Summer Research Program - 1993. Volume 5B. Wright Laboratory

Science.gov (United States)

1993-12-01

Konstruktion mit Katalogen." Feinwerktechnik 75, pp. 337-345. [ROTH741 K. Roth. "Aufbau and Handhabung von Konstruktionskatalogen," VDI -Berichte 219...Dusseldorf: VDI -Verlag, 1974. ISTAU891 L. A. Stauffer. R. A. Slughterbeck-Hyde. "The nature of constraints and their effect on quality and satisficing...Electrolyte Experimental Calculated NMP 1690 2048 DMAC 1648 1979 DMF 1679 1995 BL 1774 2123 VL 1770 2121 PC 1802 2163 2. Simulation of Li-Polymer

Kitchenette: Hell or Home? Different"Kitchenette"Images Created by Richard Wright and Gwendolyn Brooks%Kitchenette:Hell or Home?Different"Kitchenette"Images Created by Richard Wright and Gwendolyn Brooks

Institute of Scientific and Technical Information of China (English)

肖志宏

2017-01-01

How the southern black migrants navigate and survive the northern urban space is a question profoundly explored and realistically documented in many migration narratives in African American literature. This paper concentrates on the image of Chicago"kitchenette"in the works of Richard Wright and Gwendolyn Brooks, in an attempt to demonstrate the different inter-pretations of migrant spaces on the urban landscape.

Study and application of the balloon frame system to the industrialization of housing: the case of the American System-Built Houses of Frank Lloyd Wright

Directory of Open Access Journals (Sweden)

B. Serra Soriano

2017-06-01

Full Text Available Within his large architectural production, Frank Lloyd Wright had the opportunity to experiment with the timber industrialization, linking a traditional material with the modern sense of architecture. Wood and Frank Lloyd Wright are inseparable from the balloon frame system, a system which he will use at his first housing and through which he will materialize the spatial decomposition concept. The research on the particular American System-Built Houses case will serve to show the earliest experiences of Wright with the industry, whose conclusions he would use for subsequent researches on prefabrication.

3 CFR 8466 - Proclamation 8466 of December 16, 2009. Wright Brothers Day, 2009

Science.gov (United States)

2010-01-01

... alter our world. Today, we honor the enduring American spirit of creativity and innovation that made the.... In these challenging times, the story of Orville and Wilbur Wright reminds us of what can be accomplished when imagination is joined with tenacity. Their spirit lives on in every garage and basement...

The portrait of a prophet – why is Wright not right about Jesus ...

African Journals Online (AJOL)

question and then bases a reconstruction of Jesus on this answer. What, then, are his sources and how does he apply them to arrive at these conclusions? This article presents the portrait Wright painted of the historical Jesus and investigates how it was arrived at. HTS Theological Studies/Teologiese Studies Vol.

Summer Research Program - 1997. High School Apprenticeship Program. Final Reports Volume 15B, Wright Laboratory

National Research Council Canada - National Science Library

Moore, Gary

1997-01-01

The United States Air Force Summer Research Program (USAF-SRP) is designed to introduce university, college, and technical institute faculty members, graduate students, and high school students to Air Force research...

Summer Research Program - 1996. High School Apprenticeship Program Final Reports. Volume 15B, Wright Laboratory

National Research Council Canada - National Science Library

Moore, Gary

1996-01-01

The United States Air Force Summer Research Program (USAF-SRP) is designed to introduce university, college, and technical institute faculty members, graduate students, and high school students to Air Force research...

Summer Research Program - 1997. High School Apprenticeship Program Final Reports. Volume 15A, Wright Laboratory

National Research Council Canada - National Science Library

Moore, Gary

1997-01-01

The United States Air Force Summer Research Program (USAF-SRP) is designed to introduce university, college, and technical institute faculty members, graduate students, and high school students to Air Force research...

Summer Research Program - 1997. High School Apprenticeship Program. Final Reports. Volume 15C, Wright Laboratory

National Research Council Canada - National Science Library

Moore, Gary

1997-01-01

The United States Air Force Summer Research Program (USAF-SRP) is designed to introduce university, college, and technical institute faculty members, graduate students, and high school students to Air Force research...

The advanced thermionics initiative...program update

International Nuclear Information System (INIS)

Lamp, T.R.; Donovan, B.D.

1993-01-01

The United States Air Force has had a long standing interest in thermionic space power dating back to the early 1960s when a heat pipe cooled thermionic converter was demonstrated through work at the predecessor to Wright Laboratory (WL). With the exception of the short hiatus in the mid-70s, Air Force thermionics work at Wright Laboratory has continued to the present time with thermionic technology programs including the burst power thermionic phase change concepts, heat pipe cooled planar diodes, and advanced in-core concept developments such as composite materials, insulators and oxygenation. The Advanced Thermionics Initiative (ATI) program was organized to integrate thermionic technology advances into a converter suitable for in-core reactor applications in the 10 to 40 kWe power range. As an advanced thermionics technology program, the charter and philosophy of the ATI program is to provide the needed advanced converter concepts in support of national thermionic space power programs

Legitimate Use of Military Force Against State-Sponsored International Terrorism

Science.gov (United States)

1989-07-01

principal. American international law professor and theorist Hans Kelsen writes, There are a number of ways in which force may be used indirectly by a...excluding anticipatory self-defense. Brownlie, Boyle, Jessup, Kelsen , Kunz, Sorensen, and Q. Wright, among others, assert that �there is no right of...law on self-defense. The most articulate writer in this regard is Hans Kelsen , who argues: All sides in this controversy over the scope of the

Pressure Scalings and Influence Region Research

Science.gov (United States)

2018-01-01

AFRL-RQ-WP-TP-2018-0015 PRESSURE SCALINGS AND INFLUENCE REGION RESEARCH James H. Miller High Speed Systems Division...inside pages STINFO COPY AIR FORCE RESEARCH LABORATORY AEROSPACE SYSTEMS DIRECTORATE WRIGHT-PATTERSON AIR FORCE BASE, OH... RESEARCH 5a. CONTRACT NUMBER In-house 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 62201F 6. AUTHOR(S) James H. Miller 5d. PROJECT NUMBER

An Analysis of Shelf Space Allocation at the Wright-Patterson Air Force Base Commissary.

Science.gov (United States)

1987-09-01

Company performed a major shelf space allocation study involving 59 of their stores. The study involved planning and executing a shelf by shelf reset...Betty Crocker Chocolate .a9 2 Betty CrocKer Yellow .93 3 Betty Crocker Devils Food .92 4 Betty Crocker Choc . Choc . Chip .94 5 Betty Crocker German...Headquarters Air Force Commissary Services. ACOS Executive Summary. 28 January 19d6. 12. deadquarters Air Force Commissary Services. Store _Layout

El Hotel Imperial de Tokyo de Frank Lloyd Wright. Un monumento del siglo XX redivivo

Directory of Open Access Journals (Sweden)

Fernando Vegas López-Manzanares

2004-12-01

Full Text Available El texto describe el arco temporal que discurre desde el nacimiento del hotel hasta el momento de su reconstrucción. En primer lugar, indaga en la genealogía del proyecto, para abundar posteriormente en los entresijos de su construcción. Su supuesta condición indemne tras el terremoto de Kanto dio alas a Wright para reivindicar su genialidad y permitió su mitificación, aunque este hecho no sirviera para evitar las bombas en la segunda guerra mundial, ni su demolición posterior. Al hilo del discurso, se realiza una incursión en el mundo de las patologías que afectan a las obras de Wright, en la destrucción de algunas de ellas y en la relación personal del arquitecto con el mundo de la restauración.

Analysis of the bioclimatic strategies used by Frank Lloyd Wright in the Jacobs I house

Directory of Open Access Journals (Sweden)

M. Beltrán-Fernández

2017-10-01

Full Text Available Frank Lloyd Wright is considered one of the most influential architects of modern architecture due to the spatial and aesthetic qualities of his work. However, the importance of Wright’s construction and environmental solutions has been usually overlooked. In order to evaluate these qualities, the first house that Wright designed for the Jacobs family (Wisconsin, USA, 1937 has been analyzed. This well-known building has been much studied, and its architectural value much celebrated, but without analysing the advantages of the bioclimatic principles over interior environment. But how can the influence of this bioclimatic architecture be measured in terms of thermal comfort? Does the selected orientation improve interior comfort? And what about the natural ventilation or the deep overhangs? In order to assess this, a digital model for energy simulation has been built using Revit and Design Builder.

Understanding Richard Wright's "Black Boy": A Student Casebook to Issues, Sources, and Historical Documents.

Science.gov (United States)

Felgar, Robert

In "Black Boy," Richard Wright triumphs over an ugly, racist world by fashioning an inspiring, powerful, beautiful, and fictionalized autobiography. To help students understand and appreciate his story in the cultural, political, racial, social, and literary contexts of its time, this casebook provides primary historical documents,…

Quantum Confined Semiconductors - In-House Interim Research

Science.gov (United States)

2013-04-01

Laboratory, Materials & Manufacturing Directorate, Wright Patterson AFB, OH 45433-7707, USA blnstituto de Ciencias Fisicas, Universidad Nacional Aut6noma...111is work was supported by the Ai1· Force Office of Scientific Research (AFRU RS E, Dr. Kitt Reinhardt). • Also with lnstituto de Ciencias Fisicas

Supporting the underdog: feminism, animal rights and citizenship in the work of Alice Morgan Wright and Edith Goode.

Science.gov (United States)

Birke, L

2000-01-01

In this article, the author examines the overlap between feminism and animal causes, particularly through the lives of two women, the sculptor, Alice Morgan Wright (1881-1975), and her friend, Edith Goode (1882-1970). Feminism and animal causes had connections in the late nineteenth century, particularly in campaigns to abolish vivisection. Wright and Goode held to these politics throughout their lives, and were "precursors of a generation yet to come" who would argue the connections - as many ecofeminists do today. Both women were involved in suffrage campaigns, and continued to be involved in women's organisations such as the National Woman's Party. They were, however, opposed to all injustice, including human mistreatment of animals. Feminism was, to Wright and Goode, part of a wider set of problems; animal cruelty reflected a greater barbarism leading to mistreatment of humans. Accordingly, they actively campaigned for legislation to protect animals and the environment, and lobbied the fledgling United Nations to include such measures. That challenge to the United Nations represented a unique attempt to bring animals into citizenship' a move being made again today, through initiatives such as the Great Ape Project.

Decentralizing constrained-efficient allocations in the Lagos–Wright pure currency economy

OpenAIRE

Bajaj, Ayushi; Hu, Tai Wei; Rocheteau, Guillaume; Silva, Mario Rafael

2017-01-01

This paper offers two ways to decentralize the constrained-efficient allocation of the Lagos–Wright (2005) pure currency economy. The first way has divisible money, take-it-or-leave-it offers by buyers, and a transfer scheme financed by money creation. If agents are sufficiently patient, the first best is achieved for finite money growth rates. If agents are impatient, the equilibrium allocation approaches the constrained-efficient allocation asymptotically as the money growth rate tends to i...

Quantification of Forecasting and Change-Point Detection Methods for Predictive Maintenance

Science.gov (United States)

2015-08-19

University of Tokyo 7-3-1 Hongo , Bunkyo-ku, Ttokyo 113-8645, Japan 3 Air Force Research Laboratory, 2977 Hobson Way, Bldg 653 Rm 427 Wright...AFB OH 45433-7734 *** University of Tokyo 7-3-1 Hongo , Bunkyo-ku, Tokyo 113-8645, Japan Abstract This work investigates the application of the

Darwinism after Mendelism: the case of Sewall Wright's intellectual synthesis in his shifting balance theory of evolution (1931).

Science.gov (United States)

Hodge, Jonathan

2011-03-01

Historians of science have long been agreeing: what many textbooks of evolutionary biology say, about the histories of Darwinism and the New Synthesis, is just too simple to do justice to the complexities revealed to critical scholarship and historiography. There is no current consensus, however, on what grand narratives should replace those textbook histories. The present paper does not offer to contribute directly to any grand, consensual, narrational goals; but it does seek to do so indirectly by showing how, in just one individual case, details of intellectual biography connect with big picture issues. To this end, I examine here how very diverse scientific and metaphysical commitments were integrated in Sewall Wright's own personal synthesis of biology and philosophy. Taking as the decisive text the short final section of Wright's long 1931 paper on 'Evolution in Mendelian populations,' I examine how his shifting balance theory (SBT) related to his optimum breeding strategy research, his physiological genetics, his general theory of homogenising and heterogenesing causation and his panpsychist view of mind and matter; and I discuss how understanding these relations can clarify Wright's place in the longue durée of evolutionary thought. Copyright © 2010 Elsevier Ltd. All rights reserved.

An Analysis of Measures Used to Evaluate the Air Force Critical Item Program

Science.gov (United States)

1991-09-01

example of a histogram. Cause & Effect Diagram. The cause and effect diagram was introduced in 1953 by Dr. Kaoru Ishikawa in summarizing the opinions of...Personal Interview. Air Force Institute of Technology, School of Engineering, Wright-Patterson AFB OH, 24 April 1991. 31. Ishikawa , Dr. Kaoru . Guide to...collected. How the data are collected will determine which measurement techniques are appropriate. Ishikawa classifies data collection into five categories

Fatigue Crack Growth and Fracture Behavior of As-Cast Ti-43.5Al-4Nb-1Mo-0.1B (TNM) Compared to Ti-48Al-2Nb-2Cr (4822) (Postprint)

Science.gov (United States)

2017-11-22

unlimited. © ELSEVIER LTD (STINFO COPY) AIR FORCE RESEARCH LABORATORY MATERIALS AND MANUFACTURING DIRECTORATE WRIGHT-PATTERSON AIR FORCE BASE, OH...published in Intermetallics, Vol. 91, 17 Sep 2017. © 2017 Elsevier Ltd. The U.S. Government is joint author of the work and has the right to use, modify...M.S. Dahar). Intermetallics 91 (2017) 158–168 Available online 17 September 2017 0966-9795/ © 2017 Elsevier Ltd. All rights reserved. MARK 1

A taxonomic revision of the genus Primnoisis Studer [& Wright], 1887 (Coelenterata: Octocorallia: Isididae) using morphological and molecular data.

Science.gov (United States)

Moore, Kirrily; Alderslade, Philip; Miller, Karen

2016-02-05

A complete taxonomic revision of the genus Primnoisis (Isididae) is presented herein, based on original type material of all nominal species and additional specimens from deep-water surveys in sub-temperate and Antarctic waters. A multi-disciplinary approach was used combining morphological characteristics such as colonial branching patterns, polyp structure, sclerite form and arrangement, together with phylogenetic reconstructions using two mitochondrial gene regions (mtMutS and igr1-cox1). The genus Primnoisis is retained with 7 of the 8 nominal species validated (P. antarctica Wright & Studer, 1889, P. rigida Wright & Studer, 1889, P. ambigua Wright & Studer, 1889, P. delicatula Hickson, 1907, P. fragilis Kükenthal, 1912, P. formosa Gravier, 1913 and P. mimas Bayer & Stefani, 1987), with the eighth (P. sparsa Wright & Studer, 1889), synonymised with P. antarctica. In addition, the species Mopsea gracilis Gravier, 1913 is reassigned to Primnoisis and an additional five new species are described (P. chatham n. sp., P. erymna n. sp., P. millerae n. sp., P. niwa n. sp. and P. tasmani n. sp). Most of the species fell into two clear groups, defined both by morphology and genetic grouping, for which two new sub-genera are proposed (P. (Primnoisis) n. subg. and P. (Delicatisis) n. subg.). Three species, P. ambigua, P. mimas and P. tasmani, could not be placed reliably in either sub-genus due to distinctive morphological features or genetic dissimilarity. It was not possible to confirm the monophyly of the genus due to unresolved relationships with the closely related genus Notisis Gravier, 1913 and an undescribed genus of Mopseinae.

Space power technology for the twenty-first century (SPT21)

International Nuclear Information System (INIS)

Borger, W.U.; Massie, L.D.

1988-01-01

During the spring and summer months of 1987, the Aero Propulsion Laboratory of the Air Force Wright Aeronautical Laboratories, Wright-Patterson AFB, Ohio in cooperation with the Air Force Space Technology Center at Kirtland AFB, New Mexico, undertook an initiative to develop a Strategic Plan for Space Power Technology Development. The initiative was called SPT21, Space Power Technology for the Twenty-First Century. The planning process involved the participation of other Government organizations (U.S. Army, Navy, DOE and NASA) along with major aerospace companies and universities. Following an SPT21 kickoff meeting on 28 May 1987, detailed strategic planning was accomplished through seven (7) Space Power Technology Discipline Workshops commencing in June 1987 and concluding in August 1987. Technology Discipline Workshops were conducted in the following areas: (1) Solar Thermal Dynamic Power Systems (2) Solar Photovoltaic Cells and Arrays (3) Thermal Management Technology (4) Energy Storage Technology (5) Nuclear Power Systems Technology (6) Power Conditioning, Distribution and Control and (7) Systems Technology/Advanced Concepts. This technical paper summarizes the planning process and describes the salient findings and conclusions of the workshops

Space power subsystem sizing

International Nuclear Information System (INIS)

Geis, J.W.

1992-01-01

This paper discusses a Space Power Subsystem Sizing program which has been developed by the Aerospace Power Division of Wright Laboratory, Wright-Patterson Air Force Base, Ohio. The Space Power Subsystem program (SPSS) contains the necessary equations and algorithms to calculate photovoltaic array power performance, including end-of-life (EOL) and beginning-of-life (BOL) specific power (W/kg) and areal power density (W/m 2 ). Additional equations and algorithms are included in the spreadsheet for determining maximum eclipse time as a function of orbital altitude, and inclination. The Space Power Subsystem Sizing program (SPSS) has been used to determine the performance of several candidate power subsystems for both Air Force and SDIO potential applications. Trade-offs have been made between subsystem weight and areal power density (W/m 2 ) as influenced by orbital high energy particle flux and time in orbit

Dos modos de situarse en el lugar : Monticello de Thomas Jefferson y Taliesin de F. Lloyd Wright

Directory of Open Access Journals (Sweden)

Juan Antonio Cortés

2012-12-01

Full Text Available

Resumen

El artículo consiste en una descripción comparada de dos edificios: Monticello ‐la casa que Thomas Jefferson construyó para sí mismo en Virginia‐ y Taliesin ‐la casa y estudio de Frank Lloyd Wright en Wisconsin‐. El texto estudia en primer lugar las fuentes arquitectónicas y la evolución del proyecto de Monticello, para centrarse después en la explicación de Taliesin. Hay una cierta similitud en el modo en que Monticello y las casas de  Wright ‐en concreto la Ward Willitts‐ se extienden  horizontalmente en el terreno y, volviendo a Taliesin, la tesis  principal del texto es que tanto la residencia de Jefferson como la de Wright se asientan sobre una colina, pero Monticello  ‘corona’ su cima, mientras que Taliesin la bordea, se sitúa como  una ‘ceja’ respecto a la misma. En definitiva, de este  último edificio se puede afirmar que es una ‘casa natural’, que  logra una plena integración entre arquitectura y naturaleza.

Palabras clave

casa, proyecto, evolución, corona, natural

Abstract

This article consists of a comparative description of two buildings: Monticello, Thomas Jefferson’s residence which he  built for himself in Virginia, and Taliesin, the studio and home of Frank Lloyd Wright in Wisconsin. First, the text studies the  architectural references and evolution of the project for  Monticello, in order to later focus on explaining Taliesin. There is a certain similarity in the way that Monticello and Wright’s  houses (especially the Ward Willits House extend horizontally  across the land. The thesis of this article is that both Jefferson’s and Wright’s residences rest upon a hill, but Monticello crowns  the top while Taliesin borders it like an eyebrow. In conclusion, we can say that Taliesin is a “natural house”, which manages to fully integrate its architecture with nature

Preparing General Purpose Forces in the United States and British Armies for Counterinsurgent Operations

Science.gov (United States)

2010-12-10

Operations In Iraq: Planning, Combat, And Occupation,” Thomas Ricks’ Fiasco, and reports by Army historian Major Isaiah Wilson, and former CENCTOM J-4...established Multi-National Forces-Iraq, and Lieutenant General Thomas Metz, commander of the Army’s III Corps, assumed the mantle of Multi-National Corps...Donald P. Wright and Colonel Timothy R. Reese or Thomas Ricks’ Fiasco among other books. 18Dr. Carter Malkasian, “Counterinsurgency in Iraq: May 2003

Collaboration, Reputation, and Ethics in American Academic Life: Hans H. Gerth and C. Wright Mills.

Science.gov (United States)

Oakes, Guy; Vidich, Arthur J.

Using the collaboration between sociologist C. Wright Mills and Hans H. Gerth and their studies of the work of Max Weber as a point of departure for a sustained discussion of academic ethics, this book explores how concealment, secrecy, and deception contribute to the building of academic reputation and how the balance of knowledge and power in a…

Richard Wright's Thematic Treatment of Women in "Uncle Tom's Children,""Black Boy," and "Native Son."

Science.gov (United States)

Brewton, Butler E.

Richard Wright's literary work emphasizes a contrast between black women and white women. Although both are "givers" to black boys, the nature of what they give is different. The black woman gives physical life, feeds it, and protects it at the expense of spiritual or creative vitality. Her goal is to survive bodily, to breathe, to have…

Note: Measurement system for the radiative forcing of greenhouse gases in a laboratory scale

Energy Technology Data Exchange (ETDEWEB)

Kawamura, Yoshiyuki [Department of Intelligent Mechanical Engineering, Fukuoka Institute of Technology, 3-30-1 Wajirohigashi, Higashiku, Fukuoka 811-0295 (Japan)

2016-01-15

The radiative forcing of the greenhouse gases has been studied being based on computational simulations or the observation of the real atmosphere meteorologically. In order to know the greenhouse effect more deeply and to study it from various viewpoints, the study on it in a laboratory scale is important. We have developed a direct measurement system for the infrared back radiation from the carbon dioxide (CO{sub 2}) gas. The system configuration is similar with that of the practical earth-atmosphere-space system. Using this system, the back radiation from the CO{sub 2} gas was directly measured in a laboratory scale, which roughly coincides with meteorologically predicted value.

Note: Measurement system for the radiative forcing of greenhouse gases in a laboratory scale.

Science.gov (United States)

Kawamura, Yoshiyuki

2016-01-01

The radiative forcing of the greenhouse gases has been studied being based on computational simulations or the observation of the real atmosphere meteorologically. In order to know the greenhouse effect more deeply and to study it from various viewpoints, the study on it in a laboratory scale is important. We have developed a direct measurement system for the infrared back radiation from the carbon dioxide (CO2) gas. The system configuration is similar with that of the practical earth-atmosphere-space system. Using this system, the back radiation from the CO2 gas was directly measured in a laboratory scale, which roughly coincides with meteorologically predicted value.

The Impact of Grading on a Curve: Assessing the Results of Kulick and Wright's Simulation Analysis

Science.gov (United States)

Bailey, Gary L.; Steed, Ronald C.

2012-01-01

Kulick and Wright concluded, based on theoretical mathematical simulations of hypothetical student exam scores, that assigning exam grades to students based on the relative position of their exam performance scores within a normal curve may be unfair, given the role that randomness plays in any given student's performance on any given exam.…

Air Force Research Laboratory Spacecraft Cryocooler Endurance Evaluation Facility Closing Report

Science.gov (United States)

Armstrong, J.; Martin, K. W.; Fraser, T.

2015-12-01

The Air Force Research Laboratory (AFRL) Spacecraft Component Thermal Research Group has been devoted to evaluating lifetime performance of space cryocooler technology for over twenty years. Long-life data is essential for confirming design lifetimes for space cryocoolers. Continuous operation in a simulated space environment is the only accepted method to test for degradation. AFRL has provided raw data and detailed evaluations to cryocooler developers for advancing the technology, correcting discovered deficiencies, and improving cryocooler designs. At AFRL, units of varying design and refrigeration cycles were instrumented in state-of-the-art experiment stands to provide spacelike conditions and were equipped with software data acquisition to track critical cryocooler operating parameters. This data allowed an assessment of the technology's ability to meet the desired lifetime and documented any long-term changes in performance. This paper will outline a final report of the various flight cryocoolers tested in our laboratory. The data summarized includes the seven cryocoolers tested during 2014-2015. These seven coolers have a combined total of 433,326 hours (49.5 years) of operation.

The Wright Science Colloquia - Entering the Nano-World

CERN Multimedia

2002-01-01

In 1965, Intel co-founder Gordon Moore made an astonishing prediction - that every year processing power would double. Although it was corrected to a period of 18 to 24 months in 1975, this prediction has always proved accurate. Accordingly, the first Intel processor produced in 1975 was equipped with 2,300 transistors whereas the latest edition has 55 million. That means 55 million etched components crammed into an area of about a square centimetre! Today we have this extraordinary process of miniaturisation to thank for cell phones, computers and other, ever more compact electronic marvels. But where will the miniaturisation race end? What will happen when electronic etchings reach the nano-scale (a millionth of a millimetre), approaching the size of an atom? How can we even start to comprehend this nano-world, whose laws are so different from our own, human-sized world? These fascinating questions are on the programme of the 10th Wright Science Colloquia from 18 to 22 November. Five world-renowned specia...

A modified Wright-Fisher model that incorporates Ne: A variant of the standard model with increased biological realism and reduced computational complexity.

Science.gov (United States)

Zhao, Lei; Gossmann, Toni I; Waxman, David

2016-03-21

The Wright-Fisher model is an important model in evolutionary biology and population genetics. It has been applied in numerous analyses of finite populations with discrete generations. It is recognised that real populations can behave, in some key aspects, as though their size that is not the census size, N, but rather a smaller size, namely the effective population size, Ne. However, in the Wright-Fisher model, there is no distinction between the effective and census population sizes. Equivalently, we can say that in this model, Ne coincides with N. The Wright-Fisher model therefore lacks an important aspect of biological realism. Here, we present a method that allows Ne to be directly incorporated into the Wright-Fisher model. The modified model involves matrices whose size is determined by Ne. Thus apart from increased biological realism, the modified model also has reduced computational complexity, particularly so when Ne⪡N. For complex problems, it may be hard or impossible to numerically analyse the most commonly-used approximation of the Wright-Fisher model that incorporates Ne, namely the diffusion approximation. An alternative approach is simulation. However, the simulations need to be sufficiently detailed that they yield an effective size that is different to the census size. Simulations may also be time consuming and have attendant statistical errors. The method presented in this work may then be the only alternative to simulations, when Ne differs from N. We illustrate the straightforward application of the method to some problems involving allele fixation and the determination of the equilibrium site frequency spectrum. We then apply the method to the problem of fixation when three alleles are segregating in a population. This latter problem is significantly more complex than a two allele problem and since the diffusion equation cannot be numerically solved, the only other way Ne can be incorporated into the analysis is by simulation. We have

Laboratory hemostasis: milestones in Clinical Chemistry and Laboratory Medicine.

Science.gov (United States)

Lippi, Giuseppe; Favaloro, Emmanuel J

2013-01-01

Hemostasis is a delicate, dynamic and intricate system, in which pro- and anti-coagulant forces cooperate for either maintaining blood fluidity under normal conditions, or else will prompt blood clot generation to limit the bleeding when the integrity of blood vessels is jeopardized. Excessive prevalence of anticoagulant forces leads to hemorrhage, whereas excessive activation of procoagulant forces triggers excessive coagulation and thrombosis. The hemostasis laboratory performs a variety of first, second and third line tests, and plays a pivotal role in diagnostic and monitoring of most hemostasis disturbances. Since the leading targets of Clinical Chemistry and Laboratory Medicine include promotion of progress in fundamental and applied research, along with publication of guidelines and recommendations in laboratory diagnostics, this journal is an ideal source of information on current developments in the laboratory technology of hemostasis, and this article is aimed to celebrate some of the most important and popular articles ever published by the journal in the filed of laboratory hemostasis.

Los Alamos National Laboratory Facilities, Security and Safeguards Division, Safeguards and Security Program Office, Protective Force Oversight Program

International Nuclear Information System (INIS)

1995-01-01

The purpose of this document is to identify and describe the duties and responsibilities of Facility Security and Safeguards (FSS) Safeguards and Security (SS) organizations (groups/offices) with oversight functions over the Protection Force (PF) subcontractor. Responsible organizations will continue their present PF oversight functions under the Cost Plus Award Fee (CPAF) assessment, but now will be required to also coordinate, integrate, and interface with other FSS S and S organizations and with the PF subcontractor to measure performance, assess Department of Energy (DOE) compliance, reduce costs, and minimize duplication of effort. The role of the PF subcontractor is to provide the Laboratory with effective and efficient protective force services. PF services include providing protection for the special nuclear material, government property and classified or sensitive information developed and/or consigned to the Laboratory, as well as protection for personnel who work or participate in laboratory activities. FSS S and S oversight of both performance and compliance standards/metrics is essential for these PF objectives to be met

Perspective on One Decade of Laser Propulsion Research at the Air Force Research Laboratory, November 1995-2005 (DVD)

National Research Council Canada - National Science Library

2007-01-01

.... PHYSICAL DESCRIPTION: 1 DVD-ROM and 1 CD-ROM; 4 3/4 in.; 395 MB. ABSTRACT: A short film and presentation on laser propulsion research at the Air Force Research Laboratory, spanning November 1995 through October 2005...

User`s Guide for the NREL Force and Loads Analysis Program. Version 2.2

Energy Technology Data Exchange (ETDEWEB)

Wright, A D

1992-08-01

The following report gives the reader an overview of and instructions on the proper use of the National Renewable Energy Laboratory Force and Loads Analysis Program (FLAP, version 2.2). It is intended as a tool for prediction of rotor and blade loads and response for two- or three-bladed rigid hub wind turbines. The effects of turbulence are accounted for. The objectives of the report are to give an overview of the code and also show the methods of data input and correct code execution steps in order to model an example two-bladed rigid hub turbine. A large portion of the discussion (Sections 6.0, 7.0, and 8.0) is devoted to the subject of inputting and running the code for wind turbulence effects. The ability to include turbulent wind effects is perhaps the biggest change in the code since the release of FLAP version 2.01 in 1988. This report is intended to be a user`s guide. It does not contain a theoretical discussion on equations of motion, assumptions, underlying theory, etc. It is intended to be used in conjunction with Wright, Buhl, and Thresher (1988).

The First Nine Months of Editing Wittgenstein - Letters from G.E.M. Anscombe and Rush Rhees to G.H. von Wright

Directory of Open Access Journals (Sweden)

Christian Eric Erbacher

2015-07-01

Full Text Available The National Library of Finland (NLF and the Von Wright and Wittgenstein Archives at the University of Helsinki (WWA keep the collected correspondence of Georg Henrik von Wright, Wittgenstein’s friend and successor at Cambridge and one of the three literary executors of Wittgenstein’s Nachlass. Among von Wright’s correspondence partners, Elizabeth Anscombe and Rush Rhees are of special interest to Wittgenstein scholars as the two other trustees of the Wittgenstein papers. Thus, von Wright’s collections held in Finland promise to shed light on the context of decades of editorial work that made Wittgenstein’s later philosophy available to all interested readers. In this text, we present the letters which von Wright received from Anscombe and Rhees during the first nine months after Wittgenstein’s death. This correspondence provides a vivid picture of the literary executors as persons and of their developing relationships. The presented letters are beautiful examples of what the correspondence as a whole has to offer; it depicts – besides facts of editing – the story of three philosophers, whose conversing voices unfold the human aspects of inheriting Wittgenstein’s Nachlass. Their story does not only deal with editing the papers of an eminent philosopher, but with the attempt to do justice to the man they knew, to his philosophy and to his wishes for publication.

Pathology and Laboratory Medicine Support for the American Expeditionary Forces by the US Army Medical Corps During World War I.

Science.gov (United States)

Wright, James R; Baskin, Leland B

2015-09-01

Historical research on pathology and laboratory medicine services in World War I has been limited. In the Spanish American War, these efforts were primarily focused on tropical diseases. World War I problems that could be addressed by pathology and laboratory medicine were strikingly different because of the new field of clinical pathology. Geographic differences, changing war tactics, and trench warfare created new issues. To describe the scope of pathology and laboratory medicine services in World War I and the value these services brought to the war effort. Available primary and secondary sources related to American Expeditionary Forces' laboratory services were analyzed and contrasted with the British and German approaches. The United States entered the war in April 1917. Colonel Joseph Siler, MD, a career medical officer, was the director, and Colonel Louis B. Wilson, MD, head of pathology at the Mayo Clinic, was appointed assistant director of the US Army Medical Corps Division of Laboratories and Infectious Disease, based in Dijon, France. During the next year, they organized 300 efficient laboratories to support the American Expeditionary Forces. Autopsies were performed to better understand treatment of battlefield injuries, effects of chemical warfare agents, and the influenza pandemic; autopsies also generated teaching specimens for the US Army Medical Museum. Bacteriology services focused on communicable diseases. Laboratory testing for social diseases was very aggressive. Significant advances in blood transfusion techniques, which allowed brief blood storage, occurred during the war but were not primarily overseen by laboratory services. Both Siler and Wilson received Distinguished Service Medals. Wilson's vision for military pathology services helped transform American civilian laboratory services in the 1920s.

Constraining Carbonaceous Aerosol Climate Forcing by Bridging Laboratory, Field and Modeling Studies

Science.gov (United States)

Dubey, M. K.; Aiken, A. C.; Liu, S.; Saleh, R.; Cappa, C. D.; Williams, L. R.; Donahue, N. M.; Gorkowski, K.; Ng, N. L.; Mazzoleni, C.; China, S.; Sharma, N.; Yokelson, R. J.; Allan, J. D.; Liu, D.

2014-12-01

Biomass and fossil fuel combustion emits black (BC) and brown carbon (BrC) aerosols that absorb sunlight to warm climate and organic carbon (OC) aerosols that scatter sunlight to cool climate. The net forcing depends strongly on the composition, mixing state and transformations of these carbonaceous aerosols. Complexities from large variability of fuel types, combustion conditions and aging processes have confounded their treatment in models. We analyse recent laboratory and field measurements to uncover fundamental mechanism that control the chemical, optical and microphysical properties of carbonaceous aerosols that are elaborated below: Wavelength dependence of absorption and the single scattering albedo (ω) of fresh biomass burning aerosols produced from many fuels during FLAME-4 was analysed to determine the factors that control the variability in ω. Results show that ω varies strongly with fire-integrated modified combustion efficiency (MCEFI)—higher MCEFI results in lower ω values and greater spectral dependence of ω (Liu et al GRL 2014). A parameterization of ω as a function of MCEFI for fresh BB aerosols is derived from the laboratory data and is evaluated by field data, including BBOP. Our laboratory studies also demonstrate that BrC production correlates with BC indicating that that they are produced by a common mechanism that is driven by MCEFI (Saleh et al NGeo 2014). We show that BrC absorption is concentrated in the extremely low volatility component that favours long-range transport. We observe substantial absorption enhancement for internally mixed BC from diesel and wood combustion near London during ClearFlo. While the absorption enhancement is due to BC particles coated by co-emitted OC in urban regions, it increases with photochemical age in rural areas and is simulated by core-shell models. We measure BrC absorption that is concentrated in the extremely low volatility components and attribute it to wood burning. Our results support

Fisher-Wright model with deterministic seed bank and selection.

Science.gov (United States)

Koopmann, Bendix; Müller, Johannes; Tellier, Aurélien; Živković, Daniel

2017-04-01

Seed banks are common characteristics to many plant species, which allow storage of genetic diversity in the soil as dormant seeds for various periods of time. We investigate an above-ground population following a Fisher-Wright model with selection coupled with a deterministic seed bank assuming the length of the seed bank is kept constant and the number of seeds is large. To assess the combined impact of seed banks and selection on genetic diversity, we derive a general diffusion model. The applied techniques outline a path of approximating a stochastic delay differential equation by an appropriately rescaled stochastic differential equation. We compute the equilibrium solution of the site-frequency spectrum and derive the times to fixation of an allele with and without selection. Finally, it is demonstrated that seed banks enhance the effect of selection onto the site-frequency spectrum while slowing down the time until the mutation-selection equilibrium is reached. Copyright © 2016 Elsevier Inc. All rights reserved.

Evaluation of a Damage Accumulation Monitoring System as an Individual Aircraft Tracking Concept

Science.gov (United States)

1982-05-01

series of cinematic picture frames. The real life situation is even more complicated because the aircraft experiences intermediate loading states as...Fighter Attack Spectrum on Crack Growth, Air Force Flight Dynamics Laboratory (FBE), Wright- Patterson AFB, Ohio, 45433, AFFDL-TR-76-112, March 1977...Pennsylvania, 19874, Report Number NADC-77194-60, March 29, 1980. 209 10. G. E. Lambert and D. F. Bryan, The Influence of Fleet Variability on Crack Growth

Toxic Hazards Research Unit Annual Technical Report: 1984

Science.gov (United States)

1984-09-01

exposed to TOCP exhibited the classic lesions of delayed neuropathy (Smith and Lillie, 1931; Barnes and Denz, 1953; (avanagh, 1954; and Fenton , 1955...Safety of *.i Chemicals in Food, Drugs, and Cosmetics , The staff of the Divi- sion of Pharmacology of the Federal Food and Drug Administration, Austin...Annual Technical Report: 1967, AMRL-TR-67-137 (AD 834723), Aerospace Medical Research Laboratory, Wright-Patterson Air Force Base, Ohio. Fenton , J. C

Development and demonstration of atmospheric electricity hazards protection

OpenAIRE

Beavin , R.C.; Lippert , J.R.; La Voie , J.E.

1986-01-01

An Advanced Development Program (ADP) to develop and demonstrate effective Atmospheric Electricity Hazards Protection (AEHP) for the fighter, transport/bomber, helicopter and cruise missile classes of air vehicles is being conducted under an Air Force Wright Aeronautical Laboratories (AFWAL) contract with Boeing Military Airplane Company (BMAC). Other Government agencies are also supporting the ADP. The parameters characterizing the lightning threat have been defined for moderate and severe f...

Laboratory Exercise for Studying the Morphology of Heat-Denatured and Amyloid Aggregates of Lysozyme by Atomic Force Microscopy

Science.gov (United States)

Gokalp, Sumeyra; Horton, William; Jónsdóttir-Lewis, Elfa B.; Foster, Michelle; Török, Marianna

2018-01-01

To facilitate learning advanced instrumental techniques, essential tools for visualizing biomaterials, a simple and versatile laboratory exercise demonstrating the use of Atomic Force Microscopy (AFM) in biomedical applications was developed. In this experiment, the morphology of heat-denatured and amyloid-type aggregates formed from a low-cost…

Detection of alkaline phosphatase in canine cells previously stained with Wright-Giemsa and its utility in differentiating osteosarcoma from other mesenchymal tumors.

Science.gov (United States)

Ryseff, Julia K; Bohn, Andrea A

2012-09-01

Osteosarcoma (OSA) is a common primary bone tumor in dogs. Demonstration of alkaline phosphatase (ALP) reactivity by tumor cells on unstained slides is useful in differentiating osteosarcoma from other types of sarcoma. However, unstained slides are not always available. The objectives of this study were to evaluate the diagnostic utility of detecting ALP expression in differentiating osteosarcoma from other sarcomas in dogs using cytologic material previously stained with Wright-Giemsa stain and to assess the sensitivity and specificity of ALP expression for diagnosing osteosarcoma using a specific protocol. Archived aspirates of histologically confirmed sarcomas in dogs that had been previously stained with Wright-Giemsa stain were treated with 5-bromo, 4-chloro, 3-indolyl phosphate/nitroblue tetrazolium (BCIP/NBT) as a substrate for ALP. Cells were evaluated for expression of ALP after incubation with BCIP/NBT for 1 hour. Sensitivity and specificity of ALP expression for diagnosis of OSA were calculated. In samples from 83 dogs, cells from 15/17 OSAs and from 4/66 tumors other than OSA (amelanotic melanoma, gastrointestinal stromal tumor, collision tumor, and anaplastic sarcoma) expressed ALP. Sensitivity and specificity of ALP expression detected using BCIP/NBT substrate applied to cells previously stained with Wright-Giemsa stain for OSA were 88 and 94%, respectively. ALP expression detected using BCIP/NBT substrate applied to previously stained cells is useful in differentiating canine OSA from other mesenchymal neoplasms. © 2012 American Society for Veterinary Clinical Pathology.

Multisensory Integration for Pilot Spatial Orientation

Science.gov (United States)

2006-09-01

1993-0022). Wright-Patterson AFB, OH: Air Force Armstrong Laboratories. Gilson, R.D., Ventola, R.W., & Fenton , R.E. (1975). A kinesthetic...Ventola, R.W., & Fenton , R.E. (1975). A kinesthetic-tactual display for stall deterrence. In Eleventh Annual Conference on Manual Control (NASA TM...M., L) 2 = Impact (H, M, L) 3 = Persistence/Difficulty to work-around (H, M., L) 4 = Overall Severity: 1=Severe, 2=Major, 3=Minor, 4= Cosmetic

Consistency of the Relations of Cognitive Ability and Personality Traits to Pilot Training Performance

Science.gov (United States)

2014-08-22

MAB-II scores. The univariate Case II correction ( Thorndike , 1949) was used for the NEO-PI-R scores due to a lack of sufficient data to apply the...pilot training, AFRL-RH-WP-TR-2013-0081. Wright-Patterson AFB, OH: Air Force Research Laboratory, Decision Making Division. Thorndike , R. L...NEO domain scores were corrected using the univariate Case 2 ( Thorndike , 1949) method. Correlations in the column labeled rfc were corrected for both

A review of Curtiss-Wright rotary engine developments with respect to general aviation potential

Science.gov (United States)

Jones, C.

1979-01-01

Aviation related rotary (Wankel-type) engine tests, possible growth directions and relevant developments at Curtiss-Wright have been reviewed. Automotive rotary engines including stratified charge are described and flight test results of rotary aircraft engines are presented. The current 300 HP engine prototype shows basic durability and competitive performance potential. Recent parallel developments have separately confirmed the geometric advantages of the rotary engine for direct injected unthrottled stratified charge. Specific fuel consumption equal to or better than pre- or swirl-chamber diesels, low emission and multi-fuel capability have been shown by rig tests of similar rotary engine.

Cerebrospinal fluid protein and glucose examinations and tuberculosis:
Will laboratory safety regulations force a change of practice?

Science.gov (United States)

Tormey, William P; O'Hagan, Christopher

2015-01-01

Cerebrospinal fluid (CSF) protein and glucose examinations are usually performed in chemical pathology departments on autoanalysers. Tuberculosis (TB) is a group 3 biological agent under Directive 2000/54/EC of the European Parliament but in the biochemistry laboratory, no extra precautions are taken in its analysis in possible TB cases. The issue of laboratory practice and safety in the biochemical analyses of CSF specimens, when tuberculosis infection is in question is addressed in the context of ambiguity in the implementation of current national and international health and safety regulations. Additional protective measures for laboratory staff during the analysis of CSF TB samples should force a change in current laboratory practice and become a regulatory issue under ISO 15189. Annual Mantoux skin test or an interferon-γ release assay for TB should be mandatory for relevant staff. This manuscript addresses the issue of biochemistry laboratory practice and safety in the biochemical analyses of CSF specimens when tuberculosis infection is in question in the context of the ambiguity of statutory health and safety regulations.

Heat Flux Instrumentation Laboratory (HFIL)

Data.gov (United States)

Federal Laboratory Consortium — Description: The Heat Flux Instrumentation Laboratory is used to develop advanced, flexible, thin film gauge instrumentation for the Air Force Research Laboratory....

Wright tariffs in the Spanish electricity industry: the case of residential consumption

International Nuclear Information System (INIS)

Castro-Rodriguez, F.

1999-01-01

In this paper a capacity price model is developed for the Spanish electricity industry which allows the presentation of the Spanish utilization level tariffs as an example of duration tariffs (Wright tariffs) when duration is approximated by the ratio of consumption to power used. Using this model and data on the residential consumption of electricity, several optimal two-part tariffs are computed, considering different hypothesis on the configuration of the generating equipment. It has been found that the optimal tariff maintaining universal service increases welfare if the generating equipment and the output assignment to the different technologies are taken as given. Furthermore, if the regulator is concerned not only with efficiency, but also with distributive issues, then welfare losses associated with the existing regulatory regime are even larger

Religion and politics in conflict: Paul Stuart Wright and the 1964 coup

Directory of Open Access Journals (Sweden)

Márcio Ananias Ferreira Vilela

2016-06-01

Full Text Available In this article, we seek to understand the implications of Paulo Stuart Wright´s political and religious action. Beginning with the civil and military coup of 1964, it suffered a strong reaction from majority sectors in the Presbyterian Church of Brazil that started to perceive him as a threat to the religious community and to society itself. The following period was marked by an intense political conflict in Brazil. This contributed for the person in question to be expelled from the Church, have his mandate as a state representative for Santa Catarina impeached, be exiled, live in clandestinity and, later on in the 1970s, be murdered by the organs of repression. Thus, his trajectory bears many similarities to those of others who marked the recent history of Brazil.

Microgravity Emissions Laboratory (MEL)

Data.gov (United States)

Federal Laboratory Consortium — The Microgravity Emissions Laboratory (MEL) utilizes a low-frequency acceleration measurement system for the characterization of rigid body inertial forces generated...

A Study for Brucellosis Seroprevelance in Agri

Directory of Open Access Journals (Sweden)

Duran Tok

2009-12-01

Full Text Available AIM: We evaluated retrospectively laboratory test results of 520 patient who has brucellosis suspect between 2002-2004 years. METHOD: We use to Rose-Bengal test, Wright agglutination test and the other laboratory results and demographic properties for diagnosis. RESULTS: Rose-Bengal test was positive in 39 patients (11.3 % sera. Wright agglutination test was found positive for 1/160 or higher titers in 18 (3.4% sera. CONCLUSION: Wright agglutination test gave higher positive results in summer and autumn months. [TAF Prev Med Bull 2009; 8(6.000: 485-488

Information geometry and population genetics the mathematical structure of the Wright-Fisher model

CERN Document Server

Hofrichter, Julian; Tran, Tat Dat

2017-01-01

The present monograph develops a versatile and profound mathematical perspective of the Wright--Fisher model of population genetics. This well-known and intensively studied model carries a rich and beautiful mathematical structure, which is uncovered here in a systematic manner. In addition to approaches by means of analysis, combinatorics and PDE, a geometric perspective is brought in through Amari's and Chentsov's information geometry. This concept allows us to calculate many quantities of interest systematically; likewise, the employed global perspective elucidates the stratification of the model in an unprecedented manner. Furthermore, the links to statistical mechanics and large deviation theory are explored and developed into powerful tools. Altogether, the manuscript provides a solid and broad working basis for graduate students and researchers interested in this field.

Additional Evidence Is Needed to Recommend Acquiring a Dog to Families of Children with Autism Spectrum Disorder: A Response to Wright and Colleagues

Science.gov (United States)

Crossman, Molly K.; Kazdin, Alan E.

2016-01-01

Caregivers of children with autism spectrum disorder are vulnerable to overstated benefits of interventions, and such overstatements are common with interventions involving animals. This response to Wright, Hall, Hames, Hardmin, Mills, the Paws Team, and Mills' (2015) article, "Acquiring a Pet Dog Significantly Reduces Stress of Primary…

Hanscom Air Force Base

Data.gov (United States)

Federal Laboratory Consortium — MIT Lincoln Laboratory occupies 75 acres (20 acres of which are MIT property) on the eastern perimeter of Hanscom Air Force Base, which is at the nexus of Lexington,...

Quantitative Methods for Determining U.S. Air Force Crew Cushion Comfort

Science.gov (United States)

2006-09-01

Directorate Biosciences and Protection Division Biomechanics Branch Wright Patterson AFB OH 45433-7947 Form Approved REPORT DOCUMENTATION PAGE OMB No...Division Biomechanics Branch Wright-Patterson AFB OH 45433-7947 9. SPONSORING I MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10. SPONSOR/MONITOR’S...workstations were constructed utilizing ejection seat long-term flight. mockups and foot pedal assemblies modified to simulate the ACES II seat in the F-16

Evolutionary Game Dynamics in a Fitness-Dependent Wright-Fisher Process with Noise

International Nuclear Information System (INIS)

Quan Ji; Wang Xianjia

2011-01-01

Evolutionary game dynamics in finite size populations can be described by a fitness-dependent Wright-Fisher process. We consider symmetric 2x2 games in a well-mixed population. In our model, two parameters to describe the level of player's rationality and noise intensity in environment are introduced. In contrast with the fixation probability method that used in a noiseless case, the introducing of the noise intensity parameter makes the process an ergodic Markov process and based on the limit distribution of the process, we can analysis the evolutionary stable strategy (ESS) of the games. We illustrate the effects of the two parameters on the ESS of games using the Prisoner's dilemma games (PDG) and the snowdrift games (SG). We also compare the ESS of our model with that of the replicator dynamics in infinite size populations. The results are determined by simulation experiments. (general)

Laboratory Waste Management. A Guidebook.

Science.gov (United States)

American Chemical Society, Washington, DC.

A primary goal of the American Chemical Society Task Force on Laboratory Waste Management is to provide laboratories with the information necessary to develop effective strategies and training programs for managing laboratory wastes. This book is intended to present a fresh look at waste management from the laboratory perspective, considering both…

A new theoretical probe for the magnetic force microscope

Energy Technology Data Exchange (ETDEWEB)

Windmill, J.F.C. E-mail: jwindmill@plymouth.ac.uk; Clegg, W.W.; Jenkins, D.F.L.; Davey, P.J

2001-05-01

The magnetic force microscope (MFM) is established as a valuable tool for the analysis of magnetic structures. The standard design of MFM incorporates a silicon tip coated with a magnetic material. However, these tips are subject to several inherent problems, e.g. changing characteristics over time due to damage or magnetic hysteresis. A new theoretical electromagnetic MFM probe is introduced here. Although electromagnetic MFM has been discussed before by Zhou et al. (J. Vac. Sci. Technol. A 17 (1999) 2233), the design presented here is a different approach. Two different probe iterations and their magnetic field intensity distribution are modelled. The probe imaging capability is compared using the reciprocity principle (Wright and Hill, Appl. Phys. Lett. 68 (1996) 1726) to image the simulated force interaction between a sample and the probe fields. Thus, images of a sample's magnetic distribution are produced by the convolution of the different probe gradient field distributions and the sample magnetisation. Both perpendicular and longitudinal magnetisation patterns were simulated with the different probe iterations. This clearly showed the improvement of the second probe iteration, particularly for longitudinal patterns. The practical use of the new probe is also discussed, and future work outlined.

Looking at the work of Raul Lino, in comparison with Frank Lloyd Wright: from the Arts & Crafts, the nature, the organic and the house

Directory of Open Access Journals (Sweden)

José Manuel Fernandes

2016-11-01

Full Text Available El texto hace un análisis comparativo de las obras de Raul Lino (1879-1974, portugués, y Frank Lloyd Wright (1867-1959, de Estados Unidos- dos arquitectos (casi contemporáneos, cada uno exponente de la cultura y la sociedad de su tiempo y de su espacio de vida y de trabajo.El artículo se refiere al contexto histórico y cultural del primer periodo creativo de estos autores. En este contexto trata de las obras de John Ruskin y William Morris, creadores del Arts & Crafts, así como de las características de este movimiento artístico, de las peculiaridades del Deutscher Werkbund y de los trabajos de Sullivan y Berlage. Acerca de Lino y Wright, este artículo presenta la “comprensión del mundo” que tenían: sus temas conceptuales y arquitectónicos, así como los movimientos estéticos y culturales asociados a sus trabajos - “Casa Portuguesa” y “Arquitectura Orgánica”. Se exponen y analizan los “seis principios” de Wright y los “seis principios” de Lino -destacando los aspectos comunes de las concepciones de ambos autores. Se describen y ejemplifican, también, algunos de los temas y materiales arquitectónicos comunes en la primera fase de las obras los arquitectos. Así mismo, se estudia con mayor profundidad el diseño de obras concretas, casas, de su autoría, en sus similitudes y contrastes.

AFRL Materials and Manufacturing Directorate

Science.gov (United States)

Flight Wright-Patterson Medical Clinic Contact Us Search Wright-Patterson Air Force Base: AFRL Logo AFRL follow in footsteps of legendary WWII flight nurse New satellite communication technology positioned for commanders with new decision making tools Public Health Education Division: Educating to Protect AFRL ENSPIRE

Balance assessment during squatting exercise: A comparison between laboratory grade force plate and a commercial, low-cost device.

Science.gov (United States)

Mengarelli, Alessandro; Verdini, Federica; Cardarelli, Stefano; Di Nardo, Francesco; Burattini, Laura; Fioretti, Sandro

2018-04-11

Testing balance through squatting exercise is a central part of many rehabilitation programs and sports and plays also an important role in clinical evaluation of residual motor ability. The assessment of center of pressure (CoP) displacement and its parametrization is commonly used to describe and analyze squat movement and the laboratory-grade force plates (FP) are the gold standard for measuring balance performances from a dynamic view-point. However, the Nintendo Wii Balance Board (NWBB) has been recently proposed as an inexpensive and easily available device for measuring ground reaction force and CoP displacement in standing balance tasks. Thus, this study aimed to compare the NWBB-CoP data with those obtained from a laboratory FP during a dynamic motor task, such as the squat task. CoP data of forty-eight subjects were acquired simultaneously from a NWBB and a FP and the analyses were performed over the descending squatting phase. Outcomes showed a very high correlation (r) and limited root-mean-square differences between CoP trajectories in anterior-posterior (r > 0.99, 1.63 ± 1.27 mm) and medial-lateral (r > 0.98, 1.01 ± 0.75 mm) direction. Spatial parameters computed from CoP displacement and ground reaction force peak presented fixed biases between NWBB and FP. Errors showed a high consistency (standard deviation < 2.4% of the FP outcomes) and a random spread distribution around the mean difference. Mean velocity is the only parameter which exhibited a tendency towards proportional values. Findings of this study suggested the NWBB as a valid device for the assessment and parametrization of CoP displacement during squatting movement. Copyright © 2018 Elsevier Ltd. All rights reserved.

The flowering of pathology as a medical discipline in Boston, 1892-c.1950: W.T. Councilman, FB Mallory, JH Wright, SB Wolbach and their descendants.

Science.gov (United States)

Louis, David N; O'Brien, Michael J; Young, Robert H

2016-09-01

During most of the nineteenth century, the discipline of pathology in Boston made substantial strides as a result of physicians and surgeons who practiced pathology on a part-time basis. The present essay tells the subsequent story, beginning in 1892, when full-time pathologists begin to staff the medical schools and hospitals of Boston. Three individuals from this era deserve special mention: William T Councilman, Frank Burr Mallory and James Homer Wright, with Councilman remembered primarily as a visionary and teacher, Mallory as a trainer of many pathologists, and Wright as a scientist. Together with S Burt Wolbach in the early-to-mid-twentieth century, these pathologists went on to train the next generation of pathologists-a generation that then populated the various hospitals that were developed in Boston in the early 1900s. This group of seminal pathologists in turn formed the diagnostically strong, academically productive, pathology departments that grew in Boston over the remainder of the twentieth century.

The Wright Institute Sanctuary Project: Development and Proposed Evaluation of a Graduate Training Program Providing Clinical Services to Asylum Seekers in the Bay Area

Science.gov (United States)

Padilla, Brenda Lisa

2012-01-01

This study highlights the development of a graduate training program at The Wright Institute in Berkeley, CA, which provides assessment services for undocumented immigrants seeking asylum. This program focuses on the needs of a general asylum seeking population, with a specific relevance to some of the populations that may be served in the…

Application of software technology to a future spacecraft computer design

Science.gov (United States)

Labaugh, R. J.

1980-01-01

A study was conducted to determine how major improvements in spacecraft computer systems can be obtained from recent advances in hardware and software technology. Investigations into integrated circuit technology indicated that the CMOS/SOS chip set being developed for the Air Force Avionics Laboratory at Wright Patterson had the best potential for improving the performance of spaceborne computer systems. An integral part of the chip set is the bit slice arithmetic and logic unit. The flexibility allowed by microprogramming, combined with the software investigations, led to the specification of a baseline architecture and instruction set.

Lawrence Berkeley Laboratory Affirmative Action Program. Revised

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-06-01

The Lawrence Berkeley Laboratory`s Affirmative Action Program (AAP) serves as a working document that describes current policies, practices, and results in the area of affirmative action. It represents the Laboratory`s framework for an affirmative approach to increasing the representation of people of color and women in segments of our work force where they have been underrepresented and taking action to increase the employment of persons with disabilities and special disabled and Vietnam era veterans. The AAP describes the hierarchy of responsibility for Laboratory affirmative action, the mechanisms that exist for full Laboratory participation in the AAP, the policies and procedures governing recruitment at all levels, the Laboratory`s plan for monitoring, reporting, and evaluating affirmative action progress, and a description of special affirmative action programs and plans the Laboratory has used and will use in its efforts to increase the representation and retention of groups historically underrepresented in our work force.

United States Air Force Summer Research Program -- 1991. High School Apprenticeship Program (HSAP) Reports, Volume 13: Wright Laboratory

Science.gov (United States)

1991-12-01

subroutines will be implemented in the program to provide for enhanced flexibility and increased user-friendliness. The final product should allow ease...would convert Turbo Pascal into Quick C. The converter worked well, and I was able to finish most of the code conversion (minus the commenting) during the...benchmarking had two variables - the computer system the tests were to be performed on and the vendor marketing a VHDL implementation for that computer

United States Air Force Summer Research Program 1991. Graduate Student Research Program (GSRP) Reports. Volume 9. Wright Laboratory

Science.gov (United States)

1992-01-09

plotting mode shapes. All programs are written in FORTRAN for use on the VAX system. A flowchart of the entire analytical prediction method is shown...in Figure 1. below. RBDAT.FOR ’Lx [RBIN.DAT RBUP2.FOR ,. MODE.DAT --- ---- -4- -- RBOUT.DAT ~ I MODPLT.PRO II MODPLT.LN3 Figure 1. Flowchart for...CMES is LK Tool’s own derivation of DMIS; therefore, the only documentation is from LK Tool. I received a reference manual and a beginners training

Comparison of a laboratory grade force platform with a Nintendo Wii balance board in measurement of postural control in single-legged stance balance tasks

NARCIS (Netherlands)

Huurnink, A.; Fransz, D.P.; Kingma, I.; van Dieen, J.H.

2013-01-01

Training and testing of balance have potential applications in sports and medicine. Laboratory grade force plates (FP) are considered the gold standard for the measurement of balance performance. Measurements in these systems are based on the parameterization of center of pressure (CoP)

Natural hybridization between Vanilla claviculata (W. Wright) Sw. and V. barbellata Rchb.f. (Orchidaceae): genetic, morphological, and pollination experimental data

DEFF Research Database (Denmark)

NIELSEN, LENE ROSTGAARD

2000-01-01

Vanilla claviculata (W. Wright) Sw. and V. barbellata Rchb.f. grow sympatrically in the southwestern part of herto Rico. At three localities in the range of the two species, individuals with flowers that appeared different from previously known species were found. To test whether these were hybrids...... the hypothesis that the individuals are hybrids, which is further augmented by interspecific pollination experiments between the putative parental species. This is the first case of natural hybridization reported in the genus Vanilla....

An alternative derivation of the stationary distribution of the multivariate neutral Wright-Fisher model for low mutation rates with a view to mutation rate estimation from site frequency data.

Science.gov (United States)

Schrempf, Dominik; Hobolth, Asger

2017-04-01

Recently, Burden and Tang (2016) provided an analytical expression for the stationary distribution of the multivariate neutral Wright-Fisher model with low mutation rates. In this paper we present a simple, alternative derivation that illustrates the approximation. Our proof is based on the discrete multivariate boundary mutation model which has three key ingredients. First, the decoupled Moran model is used to describe genetic drift. Second, low mutation rates are assumed by limiting mutations to monomorphic states. Third, the mutation rate matrix is separated into a time-reversible part and a flux part, as suggested by Burden and Tang (2016). An application of our result to data from several great apes reveals that the assumption of stationarity may be inadequate or that other evolutionary forces like selection or biased gene conversion are acting. Furthermore we find that the model with a reversible mutation rate matrix provides a reasonably good fit to the data compared to the one with a non-reversible mutation rate matrix. Copyright © 2016 The Author(s). Published by Elsevier Inc. All rights reserved.

Contact force structure and force chains in 3D sheared granular systems

Science.gov (United States)

Mair, Karen; Jettestuen, Espen; Abe, Steffen

2010-05-01

Faults often exhibit accumulations of granular debris, ground up to create a layer of rock flour or fault gouge separating the rigid fault walls. Numerical simulations and laboratory experiments of sheared granular materials, suggest that applied loads are preferentially transmitted across such systems by transient force networks that carry enhanced forces. The characterisation of such features is important since their nature and persistence almost certainly influence the macroscopic mechanical stability of these systems and potentially that of natural faults. 3D numerical simulations of granular shear are a valuable investigation tool since they allow us to track individual particle motions, contact forces and their evolution during applied shear, that are difficult to view directly in laboratory experiments or natural fault zones. In characterising contact force distributions, it is important to use global structure measures that allow meaningful comparisons of granular systems having e.g. different grain size distributions, as may be expected at different stages of a fault's evolution. We therefore use a series of simple measures to characterise the structure, such as distributions and correlations of contact forces that can be mapped onto a force network percolation problem as recently proposed by Ostojic and coworkers for 2D granular systems. This allows the use of measures from percolation theory to both define and characterise the force networks. We demonstrate the application of this method to 3D simulations of a sheared granular material. Importantly, we then compare our measure of the contact force structure with macroscopic frictional behaviour measured at the boundaries of our model to determine the influence of the force networks on macroscopic mechanical stability.

77 FR 55465 - US Air Force Exclusive Patent License

Science.gov (United States)

2012-09-10

... DEPARTMENT OF DEFENSE Department of the Air Force US Air Force Exclusive Patent License AGENCY: Air Force Research Laboratory Information Directorate, Rome, New York, Department of the Air Force... amended, the Department of the Air Force announces [[Page 55466

Force Measurement Services at Kebs: AN Overview of Equipment, Procedures and Uncertainty

Science.gov (United States)

Bangi, J. O.; Maranga, S. M.; Nganga, S. P.; Mutuli, S. M.

This paper describes the facilities, instrumentation and procedures currently used in the force laboratory at the Kenya Bureau of Standards (KEBS) for force measurement services. The laboratory uses the Force Calibration Machine (FCM) to calibrate force-measuring instruments. The FCM derives its traceability via comparisons using reference transfer force transducers calibrated by the Force Standard Machines (FSM) of a National Metrology Institute (NMI). The force laboratory is accredited to ISO/IEC 17025 by the Germany Accreditation Body (DAkkS). The accredited measurement scope of the laboratory is 1 MN to calibrate force transducers in both compression and tension modes. ISO 376 procedures are used while calibrating force transducers. The KEBS reference transfer standards have capacities of 10, 50, 300 and 1000 kN to cover the full range of the FCM. The uncertainty in the forces measured by the FCM were reviewed and determined in accordance to the new EURAMET calibration guide. The relative expanded uncertainty of force W realized by FCM was evaluated in a range from 10 kN-1 MN, and was found to be 5.0 × 10-4 with the coverage factor k being equal to 2. The overall normalized error (En) of the comparison results was also found to be less than 1. The accredited Calibration and Measurement Capability (CMC) of the KEBS force laboratory was based on the results of those intercomparisons. The FCM enables KEBS to provide traceability for the calibration of class ‘1’ force instruments as per the ISO 376.

Malaria in South Sudan 3: laboratory diagnosis

African Journals Online (AJOL)

You can prepare thick and thin blood films on separate ... However, Wright stain alone will not reliably .... This is very important as affected infants are often unable to feed.c) Systemic ... Use eye lubricant ointments rather than eye drops. A6.

Integrated Product and Process Design (IPPD): For Rapid, More Affordable Parts/Systems Using Knowledge-Based Engineering Methods

National Research Council Canada - National Science Library

Chemaly, Adel

1996-01-01

.... The report will also highlight the leveraging of in-house federal laboratory research programs, specifically, materials process design research within the Wright Laboratory, Materials Directorate...

Effects of nonlinear error correction of measurements obtained by peak flowmeter using the Wright scale to assess asthma attack severity in children

Directory of Open Access Journals (Sweden)

Stamatović Dragana

2007-01-01

Full Text Available Introduction: Monitoring of peak expiratory flow (PEF is recommended in numerous guidelines for management of asthma. Improvements in calibration methods have demonstrated the inaccuracy of original Wright scale of peak flowmeter. A new standard, EN 13826 that was applied to peak flowmeter was adopted on 1st September 2004 by some European countries. Correction of PEF readings obtained with old type devices for measurement is possible by Dr M. Miller’s original predictive equation. Objective. Assessment of PEF correction effect on the interpretation of measurement results and management decisions. Method. In children with intermittent (35 or stable persistent asthma (75 aged 6-16 years, there were performed 8393 measurements of PEF by Vitalograph normal-range peak flowmeter with traditional Wright scale. Readings were expressed as percentage of individual best values (PB before and after correction. The effect of correction was analyzed based on The British Thoracic Society guidelines for asthma attack treatment. Results. In general, correction reduced the values of PEF (p<0.01. The highest mean percentage error (20.70% in the measured values was found in the subgroup in which PB ranged between 250 and 350 l/min. Nevertheless, the interpretation of PEF after the correction in this subgroup changed in only 2.41% of measurements. The lowest mean percentage error (15.72%, and, at the same time, the highest effect of correction on measurement results interpretation (in 22.65% readings were in children with PB above 450 l/min. In 73 (66.37% subjects, the correction changed the clinical interpretation of some values of PEF after correction. In 13 (11.8% patients, some corrected values indicated the absence or a milder degree of airflow obstruction. In 27 (24.54% children, more than 10%, and in 12 (10.93%, more than 20% of the corrected readings indicated a severe degree of asthma exacerbation that needed more aggressive treatment. Conclusion

Waste site characterization through digital analysis of historical aerial photographs at Los Alamos National Laboratory and Eglin Air Force Base

International Nuclear Information System (INIS)

Van Eeckhout, E.; Pope, P.; Wells, B.; Rofer, C.; Martin, B.

1995-01-01

Historical aerial photographs are used to provide a physical history and preliminary mapping information for characterizing hazardous waste sites at Los Alamos National Laboratory and Eglin Air Force Base. The examples cited show how imagery was used to accurately locate and identify previous activities at a site, monitor changes that occurred over time, and document the observable of such activities today. The methodology demonstrates how historical imagery (along with any other pertinent data) can be used in the characterization of past environmental damage

An Undergraduate Nanotechnology Engineering Laboratory Course on Atomic Force Microscopy

Science.gov (United States)

Russo, D.; Fagan, R. D.; Hesjedal, T.

2011-01-01

The University of Waterloo, Waterloo, ON, Canada, is home to North America's first undergraduate program in nanotechnology. As part of the Nanotechnology Engineering degree program, a scanning probe microscopy (SPM)-based laboratory has been developed for students in their fourth year. The one-term laboratory course "Nanoprobing and…

The Wonder and Enrichment of Teaching Wright Morris's "A Fight between a White Boy and a Black Boy in the Dusk of a Fall Afternoon in Omaha, Nebraska."

Science.gov (United States)

McCaffrey, Jerrine

2001-01-01

Outlines a teaching method for Wright Morris's "A Fight Between a White Boy and a Black Boy in the Dusk of a Fall Afternoon in Omaha, Nebraska." Proposes that the story provides and opportunity to introduce stream-of-consciousness writing and to convey the significance of memory recall. (PM)

United States Air Force Summer Research Program - 1993 Summer Research Extension Program Final Reports, Volume 4A, Wright Laboratory

Science.gov (United States)

1994-11-01

3600-3080 cm"I and 1815- 1640 cmn"I. These areas were compared with standards of 3 molar 1-dodecanol and 3.33 molar 2- octanone in unstressed surrogate...containing 0.08 to 0.50 molar dodecanol and octanone . This test indicated that deposit formation is independent of oxygen supply and that solid...xylene mix 16. 40.32 Octanol 35.02 Phenol 17. 41.18 Dihydrobenzofuran 36.29 Trimethylbenzene 18. 43.27 C4 benzene 38.69 2,3-dihydro-IH-indene 19. 44

United States Air Force Summer Research Program 1991. Summer Faculty Research Program (SFRP) Reports. Volume 5B. Wright Laboratory

Science.gov (United States)

1992-01-09

Design, Addison-Wesley, 1989. 28. Thompson, Peter M., Pro&m CC Version 4 Tutorial and User’s Guide. STI, November, 1988. 29. Bacon, BJ., Schmidt, D.K...6rd USG: pp -C Tre .ser ernv~rr..e--= i e _-es=--. zec --re. ENVI t-e tase .Be- -- Cvi-onmert ;cr cer’er,?’ L-e v..tr mscros tl%:t ar-iv’ec %t the prog

Hemolytic disease of the newborn caused by anti-Wright (anti-Wra): case report and review of literature.

Science.gov (United States)

Squires, Amanda; Nasef, Nehad; Lin, Yulia; Callum, Jeannie; Khadawardi, Emad M; Drolet, Christine; Core, David; Simmons, Brian

2012-01-01

Antibodies to red cell antigens that are found at low frequency in the general population are rare causes of hemolytic disease of the newborn. To understand how to detect these cases, we provide a basic review of routine antenatal maternal antibody testing and report a case of a neonate with severe HDN caused by anti-Wright (anti-Wra), successfully managed with transfusion, phototherapy, and high-dose intravenous immunoglobulin. When hemolysis in a newborn is suspected in the absence of major blood group incompatibility or commonly detected maternal red cell antibodies, a direct antiglobulin test should be performed. A positive DAT should alert the clinician to the presence of maternal antibodies against low-incidence antigens. Antibodies to the Wra antigen are one such rare cause of HDN.

Concurrent Validity of a Portable Force Plate Using Vertical Jump Force-Time Characteristics.

Science.gov (United States)

Lake, Jason; Mundy, Peter; Comfort, Paul; McMahon, John J; Suchomel, Timothy J; Carden, Patrick

2018-05-29

This study examined concurrent validity of countermovement vertical jump (CMJ) reactive strength index modified and force-time characteristics recorded using a one dimensional portable and laboratory force plate system. Twenty-eight men performed bilateral CMJs on two portable force plates placed on top of two in-ground force plates, both recording vertical ground reaction force at 1000 Hz. Time to take-off, jump height, reactive strength index modified, braking and propulsion impulse, mean net force, and duration were calculated from the vertical force from both force plate systems. Results from both systems were highly correlated (r≥.99). There were small (dbraking impulse, braking mean net force, propulsion impulse, and propulsion mean net force (psystem (95% CL: .9% to 2.5%), indicating very good agreement across all of the dependent variables. The largest limits of agreement belonged to jump height (2.1%), time to take-off (3.4%), and reactive strength index modified (3.8%). The portable force plate system provides a valid method of obtaining reactive strength measures, and several underpinning force-time variables, from unloaded CMJ and practitioners can use both force plates interchangeably.

Medical Laboratory Technician--Microbiology (AFSC 90470).

Science.gov (United States)

Thompson, Joselyn H.

This four-volume student text is designed for use by Air Force personnel enrolled in a self-study extension course for medical laboratory technicians. Covered in the individual volumes are laboratory procedures in clinical bacteriology (the history of bacteriology; aseptic techniques and sterilization procedures; bacterial morphology and…

A Dictionary of Acquisition and Contracting Terms

National Research Council Canada - National Science Library

Colyer, Timothy

1997-01-01

This thesis is part of a joint research project between stndents of the Naval Postgraduate School in Monterey, CA and the Air Force Institute of Technology, Wright- Patterson Air Force Base, Dayton, OH...

Magnetic Resonance Force Microscopy System

Data.gov (United States)

Federal Laboratory Consortium — The Magnetic Resonance Force Microscopy (MRFM) system, developed by ARL, is the world's most sensitive nuclear magnetic resonance (NMR) spectroscopic analysis tool,...

NGSI student activities in open source information analysis in support of the training program of the U.S. DOE laboratories for the entry into force of the additional protocol

Energy Technology Data Exchange (ETDEWEB)

Sandoval, M Analisa [Los Alamos National Laboratory; Uribe, Eva C [Los Alamos National Laboratory; Sandoval, Marisa N [Los Alamos National Laboratory; Boyer, Brian D [Los Alamos National Laboratory; Stevens, Rebecca S [Los Alamos National Laboratory

2009-01-01

In 2008 a joint team from Los Alamos National Laboratory (LANL) and Brookhaven National Laboratory (BNL) consisting of specialists in training of IAEA inspectors in the use of complementary access activities formulated a training program to prepare the U.S. Doe laboratories for the entry into force of the Additional Protocol. As a major part of the support of the activity, LANL summer interns provided open source information analysis to the LANL-BNL mock inspection team. They were a part of the Next Generation Safeguards Initiative's (NGSI) summer intern program aimed at producing the next generation of safeguards specialists. This paper describes how they used open source information to 'backstop' the LANL-BNL team's effort to construct meaningful Additional Protocol Complementary Access training scenarios for each of the three DOE laboratories, Lawrence Livermore National Laboratory, Idaho National Laboratory, and Oak Ridge National Laboratory.

Polymer Processing and Characterization Laboratory

Data.gov (United States)

Federal Laboratory Consortium — The purpose is to process and evaluate polymers for use in nonlinear optical, conductive and structural Air Force applications. Primary capabilities are extrusion of...

Applications of population genetics to animal breeding, from wright, fisher and lush to genomic prediction.

Science.gov (United States)

Hill, William G

2014-01-01

Although animal breeding was practiced long before the science of genetics and the relevant disciplines of population and quantitative genetics were known, breeding programs have mainly relied on simply selecting and mating the best individuals on their own or relatives' performance. This is based on sound quantitative genetic principles, developed and expounded by Lush, who attributed much of his understanding to Wright, and formalized in Fisher's infinitesimal model. Analysis at the level of individual loci and gene frequency distributions has had relatively little impact. Now with access to genomic data, a revolution in which molecular information is being used to enhance response with "genomic selection" is occurring. The predictions of breeding value still utilize multiple loci throughout the genome and, indeed, are largely compatible with additive and specifically infinitesimal model assumptions. I discuss some of the history and genetic issues as applied to the science of livestock improvement, which has had and continues to have major spin-offs into ideas and applications in other areas.

Gold Medal Award for Life Achievement in Psychology in the Public Interest: Beatrice A. Wright.

Science.gov (United States)

2016-01-01

The American Psychological Foundation (APF) Gold Medal Awards recognize distinguished and enduring records of accomplishment in 4 areas of psychology. The 2016 recipient of Gold Medal Award for Life Achievement in Psychology in the Public Interest is Beatrice A. Wright. Dorothy W. Cantor, president of the APF, will present the APF Gold Medal Awards at the 124th Annual Convention of the American Psychological Association on August 5, 2016, at 4:00 p.m. Members of the 2016 APF Board of Trustees are: Dorothy W. Cantor, president; David H. Barlow, vice president; Melba J. T. Vasquez, secretary; Richard C. McCarty, treasurer; Elisabeth R. Straus, executive vice president/executive director; Cynthia Belar; Camilla Benbow; Rosie Phillips Bingham; Connie S. Chan; Anthony Jackson; Terence M. Keane; Archie L. Turner; W. Bruce Walsh; and Bonnie Markham and Rick McGraw, APA Board of Directors liaisons. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Force-free electromagnetic pulses in a laboratory plasma

Science.gov (United States)

Stenzel, R. L.; Urrutia, J. M.

1990-01-01

A short, intense current pulse is drawn from an electrode immersed in a magnetized afterglow plasma. The induced magnetic field B(r,t) assumes the shape of a helical double vortex which propagates along B(0) through the uniform plasma as a whistler mode. The observations support a prediction of force-free (J x B + neE = 0) electromagnetic fields and solitary waves. Energy and helicity are approximately conserved.

Introducing Darwinism to Toronto's post-1887 reconstituted medical school.

Science.gov (United States)

Court, John P M

2011-01-01

Charles Darwin's scientific paradigm was largely welcomed in Canadian academic biology and medicine, while reaction among other faculty and laypeople ranged from interest to outrage. In 1874, Ramsay Wright, a Darwinian-era biologist from Edinburgh, was appointed to the University of Toronto's Chair of Natural History. Over his 38-year career Wright integrated the evolutionary perspective into medical and biology teaching without accentuating its controversial source. He also applied the emerging German experimental research model and laboratory technology. This study identifies five categories of scientific and personal influences upon Wright through archival research on biographical sources and his writings.

Report of the Fermilab ILC Citizens' Task Force

Energy Technology Data Exchange (ETDEWEB)

None

2008-06-01

Fermi National Accelerator Laboratory convened the ILC Citizens' Task Force to provide guidance and advice to the laboratory to ensure that community concerns and ideas are included in all public aspects of planning and design for a proposed future accelerator, the International Linear Collider. In this report, the members of the Task Force describe the process they used to gather and analyze information on all aspects of the proposed accelerator and its potential location at Fermilab in northern Illinois. They present the conclusions and recommendations they reached as a result of the learning process and their subsequent discussions and deliberations. While the Task Force was charged to provide guidance on the ILC, it became clear during the process that the high cost of the proposed accelerator made a near-term start for the project at Fermilab unlikely. Nevertheless, based on a year of extensive learning and dialogue, the Task Force developed a series of recommendations for Fermilab to consider as the laboratory develops all successor projects to the Tevatron. The Task Force recognizes that bringing a next-generation particle physics project to Fermilab will require both a large international effort and the support of the local community. While the Task Force developed its recommendations in response to the parameters of a future ILC, the principles they set forth apply directly to any large project that may be conceived at Fermilab, or at other laboratories, in the future. With this report, the Task Force fulfills its task of guiding Fermilab from the perspective of the local community on how to move forward with a large-scale project while building positive relationships with surrounding communities. The report summarizes the benefits, concerns and potential impacts of bringing a large-scale scientific project to northern Illinois.

Editing Procedure for Anthropometric Survey Data

Science.gov (United States)

1978-07-01

prs. lli e er 21 A=S(I,1)/N, B=S(I,2)/N, C=S(I,3)/N, D=S(I,4)/N and, Mean = A + S(I,3) Standard Deviation = /B - A*A Veta I = (C - 3BA + 2A3...Aerospace Medical Research Laboratory (AMRL), Wright-Patterson Air Force Base. The authors wish to extend their thanks to C. E . Clauser, Sandra...W (-> u ɛ CO CT> a X! 0 +J rH C -H (U A! -P M-l • C 0 — •H CO CO u * a; x: QJ 0-.+J .p (0 C 0) — cu E +> TH 6

F-15B ACTIVE with thrust vectoring nozzles on test stand

Science.gov (United States)

1995-01-01

This November 13, 1995, photograph of the F-15 Advanced Controls Technology for Integrated Vehicles (ACTIVE) at NASA's Dryden Flight Research Center, Edwards, California, shows the thrust stand being used for ground testing of a new thrust-vectoring concept involving two new Pratt & Whitney nozzles that can turn up to 20 degrees in any direction. These nozzles give the aircraft thrust control in the pitch (up and down) and yaw (left and right) directions. This will reduce drag and increase fuel economy or range as compared with conventional aerodynamic controls, which increase the retarding forces (drag) acting upon the aircraft. These tests could lead to significant performance increases for military and commercial aircraft. The research program is the product of a collaborative effort by NASA, the Air Force's Wright Laboratory, Pratt & Whitney, and McDonnell Douglas Aerospace.

Refractometry and Extinguishment/Burnback Testing of Pacific Air Forces AFFF

National Research Council Canada - National Science Library

Kalberer, Jennifer L; Barrett, Kimberly D

2006-01-01

At the request of Pacific Air Forces (PACAF), the Air Force Research Laboratory (AFRL) performed refractometry and extinguishment/burnback tests on samples of Ansulite and 3M aqueous film forming foam...

Artificial Intelligence in Space Platforms.

Science.gov (United States)

1984-12-01

computer algorithms, there still appears to be a need for Artificial Inteligence techniques in the navigation area. The reason is that navigaion, in...RD-RI32 679 ARTIFICIAL INTELLIGENCE IN SPACE PLRTFORNSMU AIR FORCE 1/𔃼 INST OF TECH WRIGHT-PRTTERSON AFB OH SCHOOL OF ENGINEERING M A WRIGHT DEC 94...i4 Preface The purpose of this study was to analyze the feasibility of implementing Artificial Intelligence techniques to increase autonomy for

The Seated Soldier Study: Posture and Body Shape in Vehicle Seats

Science.gov (United States)

2013-10-31

lasers in four towers arranged in a square create a line on the subject as they move synchronously from top to bottom. Two cameras on each of the four...of the scanner being assembled and the scanner draped with curtains to control light and provide privacy. UNCLASSIFIED UNCLASSIFIED 22 Figure 16...with special reference to the limbs. WADC Technical Report No. 55-159. Wright-Patterson Air Force Base, OH: Wright Air Development Center

Closing the Gap: An Analysis of Options for Improving the USAF Fighter Fleet from 2105 to 2035

Science.gov (United States)

2015-10-01

Lanchester Equations. Graduate Research Paper, (Wright Patterson AFB: Air Force Institute of Technology, 2011), 45 58 John P. Geiss,. et al. Blue...Gilbert, Ronald E. Strategic Implications of US Fighter Force Reductions: Air to Air Combat Modelling Using Lanchester Equations. Graduate Research Paper

Transfer of Air Force technical procurement bid set data to small businesses, using CALS and EDI: Test report

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-08-15

This report documents a test transfer of three Air Force technical procurement bid sets to one large and twelve small businesses, using the Department of Defense (DoD) Continuous Acquisition and Life-cycle Support (CALS) and ANSI ASC X12 Electronic Data Interchange (EDI) standards. The main goal of the test was to evaluate the effectiveness of using CALS technical data within the context of the DoD`s EDI-based standard approach to electronic commerce in procurement, with particular emphasis on receipt and use of the data by small contractors. Air Force procurement data was provided by the Sacramento Air Logistics Center at McClellan Air Force Base; the manufacturing participants were selected from among McClellan`s ``Blue Ribbon`` contractors, located throughout the US. The test was sponsored by the Air Force CALS Test Network, headquartered at Wright-Patterson Air Force Base. The test successfully demonstrated the technical feasibility of including CALS MIL-R-28002 (Raster) engineering data in an EDI Specification/Technical Information transaction set (ANSI ASC X12 841) when issuing electronic requests for quotation to small businesses. In many cases, the data was complete enough for the contractor participant to feel comfortable generating a quote. Lessons learned from the test are being fed back to the CALS and EDI standards organizations, and to future implementors of CALS-EDI based acquisition or contracting systems, which require the transfer of technical information, such as engineering data, manufacturing process data, quality test data, and other product or process data, in the form of a CALS or other digital datafile.

Transfer of Air Force technical procurement bid set data to small businesses, using CALS and EDI. Summary report. Revision 1

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-01-10

This report provides a summary of the Air Force CALS Test Network (AFCTN) Test Report Transfer of Air Force Technical Procurement Bid Set Data to Small Businesses, Using CALS and EDI (AFCTN Test Report 94-034, UCRL-ID-118619). It represents a synthesis of the results, conclusions, and recommendations, as well as a more concise presentation of the issues and strategies as viewed from AFCTN`s perspective. This report documents a test transfer of three Air Force technical procurement bid sets to one large and twelve small businesses, using the Department of Defense (DoD) Continuous Acquisition and Life-cycle Support (CALS) and ANSI ASC X12 Electronic Data Interchange (EDI) standards. The main goal of the test was to evaluate the effectiveness of using CALS technical data within the context of the DoD`s EDI-based standard approach to electronic commerce in procurement, with particular emphasis on receipt and use of the data by small contractors. Air Force procurement data was provided by the Sacramento Air Logistics Center at McClellan Air Force Base; the manufacturing participants were selected from among McClellan`s {open_quote}Blue Ribbon{close_quote} contractors, located throughout the United States. The test was sponsored by the Air Force CALS Test Network, headquartered at Wright-Patterson Air Force Base. The test successfully demonstrated the technical feasibility of including CALS MIL-R-28002 (Raster) engineering data in an EDI Specification/Technical Information transaction set (ANSI ASC X12 841) when issuing electronic requests for quotation to small businesses. In many cases, the data was complete enough for the contractor participant to feel comfortable generating a quote.

Environmental Impact Assessment Sandia Laboratories, New Mexico.

Science.gov (United States)

1977-05-01

awn (Aristida divaricata) 45. Arizona three-awn (Aristida arizonica ) 46. Purple three-awn (Aristida purpurea) 47. Wright’s three-awn (Aristida wrightii...californica) Willow Family *102. Fremont cottonwood (Populus fremontii) Beech Family *103. Gambel oak ( Quercus gambelii) *104. Gray oak ( Quercus grisea...105. Shrub live oak ( Quercus turbinella) Elm Family *106. Siberian elm or Chinese elm (Ulmus pumila) 107. Netlead hackberry (Celtis reticulata) Nist

Air Force Research Laboratory Sensors Directorate Communications Branch History from 1960-2011

Science.gov (United States)

2011-12-01

the National Command Authority ( NCA ) and U.S. strategic and non-strategic forces. The E-6B was conceived as a replacement for the Air Force’s Airborne...application. The physical design will meet a l-cubic-foot volume goal, given LSI processor development and large- cathode , folded-dynode photomultiplier...development. Performance limiters are the input optics ’transmission at large zenith angles and photodetector cathode quantum efficiency at the

76 FR 57026 - Air Force Scientific Advisory Board Notice of Meeting

Science.gov (United States)

2011-09-15

... open to the public. The meeting on Thursday, 14 October, will be from 8 a.m.-11:30 a.m. and closed to... Board; Air Force Global Strike Command overview highlighting high priority capability gaps and technology solution partnerships; Air Force Research Laboratory overview focusing on the Air Force Science...

Design and Characterization of a Secure Automatic Dependent Surveillance-Broadcast Prototype

Science.gov (United States)

2015-03-26

M-041 DEPARTMENT OF THE AIR FORCE AIR UNIVERSITY AIR FORCE INSTITUTE OF TECHNOLOGY Wright-Patterson Air Force Base, Ohio DISTRIBUTION STATEMENT A...of Engineering and Management Air Force Institute of Technology Air University Air Education and Training Command in Partial Fulfillment of the...Cyclic Redundancy Check CSV comma separated value CUT component under test DDC digital down conversion DF Downlink Format DUC digital up conversion

F-15B ACTIVE with thrust vectoring nozzles on test stand at sunrise

Science.gov (United States)

1995-01-01

This November 13, 1995, photograph of the F-15 Advanced Controls Technology for Integrated Vehicles (ACTIVE) at NASA's Dryden Flight Research Center, Edwards, California, shows the aircraft on a test stand at sunrise. Not shown in this photograph are the aircraft's two new Pratt & Whitney nozzles that can turn up to 20 degrees in any direction. These nozzles give the aircraft thrust control in the pitch (up and down) and yaw (left and right) directions. This will reduce drag and increase fuel economy or range as compared with conventional aerodynamic controls, which increase the retarding forces (drag) acting upon the aircraft. These tests could result in significant performance increases for military and commercial aircraft. The research program is the product of a collaborative effort by NASA, the Air Force's Wright Laboratory, Pratt & Whitney, and McDonnell Douglas Aerospace. The aircraft was originally built as an F-15B (Serial #71-0290).

Dilemas de autenticidad: la restauración de la Casa Freeman de Frank Lloyd Wright

Directory of Open Access Journals (Sweden)

Jeffrey M. Chusid

2015-06-01

Full Text Available El artículo expone una breve descripción histórica ilustrativa del proceso de encargo, diseño y construcción de la casa con los bloques prefabricados característicos de la etapa californiana de Wright y de la vida posterior del edificio, centro neurálgico de la actividad de vanguardia artística de Los Ángeles, con sustanciales modificaciones llevadas a cabo por otros arquitectos afamados como Rudolph Schindler, Gregory Ain and John Lautner. En el texto se refleja no solo la tremenda complejidad técnica de restaurar esta casa erigida con un sistema constructivo sugerente pero tremendamente frágil y problemático y la dificultad añadida de su presencia en zona sísmica y los daños sufridos por el terremoto de Los Ángeles de 1994, sino también el dilema que surge a la hora de escoger eventualmente qué fase restaurar del edificio entre toda la estratificación de intervenciones de arquitectos estrella que caracteriza a este edificio.

The Pilot Staffing Conundrum: A Delphi Study

Science.gov (United States)

2009-06-01

Project, AFIT/ GMO /LAL/98J-2. School of Logistics and Acquisition Management, Air Force Institute of Technology (AU), Wright Patterson AFB, OH, June...Kafer, John H. Relationship of Airline Pilot Demand and Air Force Pilot Retention. Graduate Research Project, AFIT/ GMO /LAL/98J-11. School of Logistics

An investigation of shoulder forces in active shoulder tackles in rugby union football.

Science.gov (United States)

Usman, Juliana; McIntosh, Andrew S; Fréchède, Bertrand

2011-11-01

In rugby union football the tackle is the most frequently executed skill and one most associated with injury, including shoulder injury to the tackler. Despite the importance of the tackle, little is known about the magnitude of shoulder forces in the tackle and influencing factors. The objectives of the study were to measure the shoulder force in the tackle, as well as the effects of shoulder padding, skill level, side of body, player size, and experimental setting on shoulder force. Experiments were conducted in laboratory and field settings using a repeated measures design. Thirty-five participants were recruited to the laboratory and 98 to the field setting. All were male aged over 18 years with rugby experience. The maximum force applied to the shoulder in an active shoulder tackle was measured with a custom built forceplate incorporated into a 45 kg tackle bag. The overall average maximum shoulder force was 1660 N in the laboratory and 1997 N in the field. This difference was significant. The shoulder force for tackling without shoulder pads was 1684 N compared to 1635 N with shoulder pads. There was no difference between the shoulder forces on the dominant and non-dominant sides. Shoulder force reduced with tackle repetition. No relationship was observed between player skill level and size. A substantial force can be applied to the shoulder and to an opponent in the tackle. This force is within the shoulder's injury tolerance range and is unaffected by shoulder pads. Copyright © 2011 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Wave Forces on Crown Walls

DEFF Research Database (Denmark)

Pedersen, Jan; Burcharth, H. F.

1993-01-01

This paper presents some of the results from a large parametric laboratory study including more than 200 long-duration model tests. The study addresses both the wave forces imposed on the breakwater crown wall as well as the performance of the structure in reducing the wave overtopping. The testing...

Air Force Research Laboratory Success Stories : A Review of 2004

Science.gov (United States)

2004-01-01

Phase IV performed a waveform characterization of the entire radar system. U Gain in the Electrico i Laboratory System Work sponsored by the AFRL...permanent disability, or death in recreational and professional activities that incorporate speed and agility, like auto racing, motorcycling, and skiing

Proceedings of the 1996 USAF Aircraft Structural Integrity Program Conference. Volume I. ASIP

National Research Council Canada - National Science Library

Waggoner, Gary

1997-01-01

.... The conference, which was sponsored by the Aeronautical Systems Center's Engineering Directorate and tile Wright Laboratory's Flight Dynamics and Materials Directorates, was hosted by the San Antonio...

A Cost-Effective Atomic Force Microscope for Undergraduate Control Laboratories

Science.gov (United States)

Jones, C. N.; Goncalves, J.

2010-01-01

This paper presents a simple, cost-effective and robust atomic force microscope (AFM), which has been purposely designed and built for use as a teaching aid in undergraduate controls labs. The guiding design principle is to have all components be open and visible to the students, so the inner functioning of the microscope has been made clear to…

Choosing in Freedom or Forced to Choose? Introspective Blindness to Psychological Forcing in Stage-Magic

Science.gov (United States)

Shalom, Diego E.; de Sousa Serro, Maximiliano G.; Giaconia, Maximiliano; Martinez, Luis M.; Rieznik, Andres; Sigman, Mariano

2013-01-01

We investigated an individual ability to identify whether choices were made freely or forced by external parameters. We capitalized on magical setups where the notion of psychological forcing constitutes a well trodden path. In live stage magic, a magician guessed cards from spectators while inquiring how freely they thought they had made the choice. Our data showed a marked blindness in the introspection of free choice. Spectators assigned comparable ratings when choosing the card that the magician deliberately forced them compared to any other card, even in classical forcing, where the magician literally handles a card to the participant This observation was paralleled by a laboratory experiment where we observed modest changes in subjective reports by factors with drastic effect in choice. Pupil dilatation, which is known to tag slow cognitive events related to memory and attention, constitutes an efficient fingerprint to index subjective and objective aspects of choice. PMID:23516455

Microwave-assisted extraction and a new determination method for total steroid saponins from Dioscorea zingiberensis C.H. Wright.

Science.gov (United States)

Ren, Yao; Chen, Yu; Hu, Bohan; Wu, Hui; Lai, Furao; Li, Xiaofeng

2015-12-01

An efficient microwave-assisted extraction (MAE) technique was applied to isolate total steroid saponins from Dioscorea zingiberensis C.H. Wright (DZW). The optimal extracting conditions were established as 75% ethanol as solvent, ratio of solid/liquid 1:20 (g/ml), temperature 75 °C, irradiation power 600 W and three extraction cycles of 6 min each. Scanning electron microscopy (SEM) images of DZW processed by four different extractions provided visual evidence of the disruption effect on DZW. Diosgenin was quantified by HPLC and examined further by LC-ESI/MS after acid hydrolysis. Total steroid saponins were calculated using diosgenin from total steroid saponins. The MAE procedure was optimized, validated and compared with other conventional extraction processes. This report provides a convenient technology for the extraction and quantification of total saponins of DZW combining MAE with HPLC and LC-ESI/MS for the first time. Copyright © 2015 Elsevier Inc. All rights reserved.

A wearable force plate system for the continuous measurement of triaxial ground reaction force in biomechanical applications

International Nuclear Information System (INIS)

Liu, Tao; Inoue, Yoshio; Shibata, Kyoko

2010-01-01

The ambulatory measurement of ground reaction force (GRF) and human motion under free-living conditions is convenient, inexpensive and never restricted to gait analysis in a laboratory environment and is therefore much desired by researchers and clinical doctors in biomedical applications. A wearable force plate system was developed by integrating small triaxial force sensors and three-dimensional (3D) inertial sensors for estimating dynamic triaxial GRF in biomechanical applications. The system, in comparison to existent systems, is characterized by being lightweight, thin and easy-to-wear. A six-axial force sensor (Nitta Co., Japan) was used as a verification measurement device to validate the static accuracy of the developed force plate. To evaluate the precision during dynamic gait measurements, we compared the measurements of the triaxial GRF and the center of pressure (CoP) by using the developed system with the reference measurements made using a stationary force plate and an optical motion analysis system. The root mean square (RMS) differences of the two transverse components (x- and y-axes) and the vertical component (z-axis) of the GRF were 4.3 ± 0.9 N, 6.0 ± 1.3 N and 12.1 ± 1.1 N, respectively, corresponding to 5.1 ± 1.1% and 6.5 ± 1% of the maximum of each transverse component and 1.3 ± 0.2% of the maximum vertical component of GRF. The RMS distance between the two systems' CoP traces was 3.2 ± 0.8 mm, corresponding to 1.2 ± 0.3% of the length of the shoe. Moreover, based on the results of the assessment of the influence of the system on natural gait, we found that gait was almost never affected. Therefore, the wearable system as an alternative device can be a potential solution for measuring CoP and triaxial GRF in non-laboratory environments

Proceedings of the IRI task force activity 2000

International Nuclear Information System (INIS)

Radicella, Sandro M.

2001-05-01

This internal report of the International Center for Theoretical Physics (ICTP) contains presentations delivered during the International Reference Ionosphere Task Force Activity 2000 which took place at the Abdus Salam ICTP during July 2000. The 2000 Task Force Activity is the seventh successful encounter of specialists organized by the URSI-COSPAR IRI Working Group and the Aeronomy and Radiopropagation Laboratory of the ICTP of Trieste, Italy. The main topic of this task force activity was the modeling of the topside ionosphere and the development of strategies for modeling of ionospheric variability

Advanced remotely maintainable force-reflecting servomanipulator concept

International Nuclear Information System (INIS)

Kuban, D.P.; Martin, H.L.

1984-01-01

A remotely maintainable force-reflecting servomanipulator concept is being developed at the Oak Ridge National Laboratory as part of the Consolidated Fuel Reprocessing Program. This new manipulator addresses requirements of advanced nuclear fuel reprocessing with emphasis on force reflection, remote maintainability, reliability, radiation tolerance, and corrosion resistance. The advanced servomanipulator is uniquely subdivided into remotely replaceable modules which will permit in situ manipulator repair by spare module replacement. Manipulator modularization and increased reliability are accomplished through a force transmission system that uses gears and torque tubes. Digital control algorithms and mechanical precision are used to offset the increased backlash, friction, and inertia resulting from the gear drives. This results in the first remotely maintainable force-reflecting servomanipulator in the world. 10 references, 4 figures, 1 table

ANATOMÍA, FÍSICA Y MECÁNICA DE LA MADERA DE Andira inermis (W. Wright DC. (Leguminosae

Directory of Open Access Journals (Sweden)

C. Téllez-Sánchez

2009-01-01

Full Text Available En el presente estudio se determinaron las características anatómicas y las propiedades físicas y mecánicas de la madera de Andira inermis (W. Wright DC. (Leguminosae. El material de estudio se obtuvo de un sólo árbol colectado en el municipio de Arteaga, Michoacán, México. La descripción anatómica se basó en las recomendaciones de IAWA. Las propiedades físicas y mecánicas se efectuaron de acuerdo a la norma D 143-94 de la ASTM. La madera de A. inermis presenta brillo mediano, vetado pronunciado, textura media, hilo entrecruzado, porosidad difusa y pared celular muy gruesa. La densidad básica es muy alta y la contracción media. El ELP, MOR y MOE es alto, extremadamente alto y medio, respectivamente, en flexión estática. En compresión paralela a la fibra su ELP es alto, MOR extremadamente alto. ELP muy alto en compresión perpendicular a la fibra. Dureza Janka muy alta.

Choosing in freedom or forced to choose? Introspective blindness to psychological forcing in stage-magic.

Directory of Open Access Journals (Sweden)

Diego E Shalom

Full Text Available We investigated an individual ability to identify whether choices were made freely or forced by external parameters. We capitalized on magical setups where the notion of psychological forcing constitutes a well trodden path. In live stage magic, a magician guessed cards from spectators while inquiring how freely they thought they had made the choice. Our data showed a marked blindness in the introspection of free choice. Spectators assigned comparable ratings when choosing the card that the magician deliberately forced them compared to any other card, even in classical forcing, where the magician literally handles a card to the participant This observation was paralleled by a laboratory experiment where we observed modest changes in subjective reports by factors with drastic effect in choice. Pupil dilatation, which is known to tag slow cognitive events related to memory and attention, constitutes an efficient fingerprint to index subjective and objective aspects of choice.

Management of Contracts for F110 Engine Procurements

National Research Council Canada - National Science Library

Granetto, Paul

2001-01-01

This audit was performed in response to an allegation to the Defense Hotline that the Wright-Patterson Air Force Base Procurement Contracting Office made poor procurement decisions on F110 aircraft engine contracts...

Environmental Assessment for the Air Force Research Laboratory Security Fence Project, Edwards Air Force Base, California

Science.gov (United States)

2012-11-26

Pleistocene/Early-Holocene Prehistory (12,000 to 7,000 BP). The Lake Mojave Period in the southwestern Great Basin comprises a regional manifestation...adaptive patterns with focal exploitation of such habitats (Tetra Tech 2010). Middle-Holocene Prehistory (8,000 to 4,000 BP). Succeeding Lake Mojave in the...Security Fence at Edwards Air Force Base, California Late Holocene Prehistory (4,000 to Contact). With return to more “favorable” environmental

Nuclear Magnetic Resonance Used to Quantify the Effect of Pyrolysis Conditions on the Oxidative Stability of Silicon Oxycarbide Ceramics

Science.gov (United States)

1996-01-01

This work was undertaken in support of the Low Cost Ceramic Composite Virtual Company, (LC^3), whose members include Northrop Grumman Corporation, AlliedSignal Inc., and Allison Advanced Development Company. LC^3 is a cost-shared effort funded by the Advanced Research Projects Agency (ARPA) and the LC^3 participants to develop a low-cost fabrication methodology for manufacturing ceramic matrix composite structural components. The program, which is being administered by the U.S. Air Force Wright Laboratory Materials Directorate, is focused on demonstrating a ceramic matrix composite turbine seal for a regional aircraft engine. This part is to be fabricated by resin transfer molding of a siloxane polymer into a fiber preform that will be transformed into a ceramic by pyrolytic conversion.

Study of Reaction Forces in a Single Sided Linear Induction Motor (SLIM)

Science.gov (United States)

1974-01-01

SLIM reaction forces were measured on a laboratory model having aluminum and aluminum-iron secondaries and the results were correlated with the theoretical forces derived for different idealized SLIM models. The first part of the report discusses wav...

F-15B ACTIVE test stand

Science.gov (United States)

1995-01-01

This November 13, 1995, photograph of the underside of the F-15 Advanced Controls Technology for Integrated Vehicles (ACTIVE) at NASA's Dryden Flight Research Center, Edwards, California, shows the thrust stand being used for ground testing of a new thrust-vectoring concept. The twin-engine F-15 research aircraft is equipped with new Pratt & Whitney nozzles that can turn up to 20 degrees in any direction. They give the aircraft thrust control in the pitch (up and down) and yaw (left and right) directions. This will reduce drag and increase fuel economy or range as compared with conventional aerodynamic controls, which increase the retarding forces (drag) acting upon the aircraft. Ground testing during the first two weeks of November 1995 went well, and flight tests began in March 1996. These tests could result in significant performance increases for military and commercial aircraft. The research program is the product of a collaborative effort by NASA, the Air Force's Wright Laboratory, Pratt & Whitney, and McDonnell Douglas Aerospace.

F-15B ACTIVE with thrust vectoring nozzles on test stand view from rear

Science.gov (United States)

1995-01-01

This November 13, 1995, photograph of the F-15 Advanced Controls Technology for Integrated Vehicles (ACTIVE) at NASA's Dryden Flight Research Center, Edwards, California, shows the aircraft's two new Pratt & Whitney nozzles that can turn up to 20 degrees in any direction. These nozzles give the aircraft thrust control in the pitch (up and down) and yaw (left and right) directions. This will reduce drag and increase fuel economy or range as compared with conventional aerodynamic controls, which increase the retarding forces (drag) acting upon the aircraft. Ground testing of a new thrust-vectoring concept employing the nozzles took place during the first two weeks of November 1995 and went well, and flight tests began in March 1996. These tests could result in significant performance increases for military and commercial aircraft. The research program is the product of a collaborative effort by NASA, the Air Force's Wright Laboratory, Pratt & Whitney, and McDonnell Douglas Aerospace.

Hypervelocity technology carbon/carbon testing

Science.gov (United States)

Anselmo, John V.; Kretz, Lawrence O.

The paper describes the procedures used at the Structures Test Laboratory of the Wright Laboratory's Flight Dynamics Directorate to test a carbon/carbon hot structure representing a typical hypersonic gliding body, and presents the results of tests. The forebody was heated to 1371 C over 13 test runs, using radiant quartz lamps; a vertical shear force of 5.34 kN was introduced to the nose at a stabilized temperature of 816 C. Test data were collected using prototype high-temperature strain gages, in-house-designed high-temperature extensometers, conventional strain gages, and thermocouples. Video footage was taken of all test runs. Test runs were successfully completed up to 1371 C with flight typical thermal gradients at heating rates up to 5.56 C/sec. Results showed that, overall, the termal test control systems performed as predicted and that test temperatures and thermal gradients were achieved to within about 5 percent in most cases.

Laboratory Sequence in Computational Methods for Introductory Chemistry

Science.gov (United States)

Cody, Jason A.; Wiser, Dawn C.

2003-07-01

A four-exercise laboratory sequence for introductory chemistry integrating hands-on, student-centered experience with computer modeling has been designed and implemented. The progression builds from exploration of molecular shapes to intermolecular forces and the impact of those forces on chemical separations made with gas chromatography and distillation. The sequence ends with an exploration of molecular orbitals. The students use the computers as a tool; they build the molecules, submit the calculations, and interpret the results. Because of the construction of the sequence and its placement spanning the semester break, good laboratory notebook practices are reinforced and the continuity of course content and methods between semesters is emphasized. The inclusion of these techniques in the first year of chemistry has had a positive impact on student perceptions and student learning.

Effect of a Metal Deactivator Fuel Additive on Fuel Deposition in Fuel Atomizers at High Temperature

Science.gov (United States)

1992-08-01

ARMY NATICK RD&E CENTER DEVELOPMENT AND ENGINEERING CTR ATTN: SATNC-U ATUN : SATBE-F I NATICK MA 01760-5020 SATBE-FL 10 SATBE-BT 2 DIRECTOR SATBE-TQ 1...SFT (MR MAKRIS) I WASHINGTON DC 20330 SAALC/LDPE (MR ELLIOT) 1 KELLY AIR FORCE BASE TX 78241 CDR US AIR FORCE WRIGHT AERO LAB CDR ATUN : POSF (MR

Hydrologic transport of depleted uranium associated with open air dynamic range testing at Los Alamos National Laboratory, New Mexico, and Eglin Air Force Base, Florida

Energy Technology Data Exchange (ETDEWEB)

Becker, N.M. [Los Alamos National Lab., NM (United States); Vanta, E.B. [Wright Laboratory Armament Directorate, Eglin Air Force Base, FL (United States)

1995-05-01

Hydrologic investigations on depleted uranium fate and transport associated with dynamic testing activities were instituted in the 1980`s at Los Alamos National Laboratory and Eglin Air Force Base. At Los Alamos, extensive field watershed investigations of soil, sediment, and especially runoff water were conducted. Eglin conducted field investigations and runoff studies similar to those at Los Alamos at former and active test ranges. Laboratory experiments complemented the field investigations at both installations. Mass balance calculations were performed to quantify the mass of expended uranium which had transported away from firing sites. At Los Alamos, it is estimated that more than 90 percent of the uranium still remains in close proximity to firing sites, which has been corroborated by independent calculations. At Eglin, we estimate that 90 to 95 percent of the uranium remains at test ranges. These data demonstrate that uranium moves slowly via surface water, in both semi-arid (Los Alamos) and humid (Eglin) environments.

Hydrologic transport of depleted uranium associated with open air dynamic range testing at Los Alamos National Laboratory, New Mexico, and Eglin Air Force Base, Florida

International Nuclear Information System (INIS)

Becker, N.M.; Vanta, E.B.

1995-01-01

Hydrologic investigations on depleted uranium fate and transport associated with dynamic testing activities were instituted in the 1980's at Los Alamos National Laboratory and Eglin Air Force Base. At Los Alamos, extensive field watershed investigations of soil, sediment, and especially runoff water were conducted. Eglin conducted field investigations and runoff studies similar to those at Los Alamos at former and active test ranges. Laboratory experiments complemented the field investigations at both installations. Mass balance calculations were performed to quantify the mass of expended uranium which had transported away from firing sites. At Los Alamos, it is estimated that more than 90 percent of the uranium still remains in close proximity to firing sites, which has been corroborated by independent calculations. At Eglin, we estimate that 90 to 95 percent of the uranium remains at test ranges. These data demonstrate that uranium moves slowly via surface water, in both semi-arid (Los Alamos) and humid (Eglin) environments

B-1 Systems Approach to Training. Volume 3. Appendix B. Bibliography and Data Collection Trips

Science.gov (United States)

1975-07-01

the Fourth Annual Symposium on Psychology in the Air Force, 1974, ~ •—- ~ - --- - Creelman , J.A., Evaluation of Approach Training Procedures...of Engineering Psychology , American Psychologist, 1972, 27 (7), 615-622. Adams, J.A., and Hufford, I.E., Effects of Programmed Perceptual Training on...Control, Wright-Patterson Air Force Base, Ohio, April 7-9, 1970. Aldrich, T.B., Proceedings of the Annual Symposium on Psychology in the Air Force (2nd

Nanopuller-open data acquisition platform for AFM force spectroscopy experiments

International Nuclear Information System (INIS)

Pawlak, Konrad; Strzelecki, Janusz

2016-01-01

Atomic Force Microscope (AFM) is a widely used tool in force spectroscopy studies. Presently, this instrument is accessible from numerous vendors, albeit commercial solutions are expensive and almost always hardware and software closed. Approaches for open setups were published, as with modern low cost and readily available piezoelectric actuators, data acquisition interfaces and optoelectronic components building such force spectroscopy AFM is relatively easy. However, suitable software to control such laboratory made instrument was not released. Developing it in the lab requires significant time and effort. Our Nanopuller software described in this paper is intended to eliminate this obstacle. With only minimum adjustments this program can be used to control and acquire data with any suitable National Instruments universal digital/analog interface and piezoelectric actuator analog controller, giving significant freedom and flexibility in designing force spectroscopy experiment. Since the full code, written in a graphical LabVIEW environment is available, our Nanopuller can be easily customized. In this paper we describe the program and test its performance in controlling different setups. Successful and accurate force curve acquisition for standard samples (single molecules of I27O reference titin polyprotein and DNA as well as red blood cells) is shown. - Highlights: • We created open data acquisition software for performing Atomic Force Microscopy force measurements with custom laboratory made setups. • The software allows large flexibility in atomic force microscope design with minimum adjustment necessary. • The software is written in LabVIEW, allowing easy customization. • We successfully tested the program on two different hardware configurations by stretching single macromolecules and indenting cells.

Nanopuller-open data acquisition platform for AFM force spectroscopy experiments

Energy Technology Data Exchange (ETDEWEB)

Pawlak, Konrad; Strzelecki, Janusz

2016-05-15

Atomic Force Microscope (AFM) is a widely used tool in force spectroscopy studies. Presently, this instrument is accessible from numerous vendors, albeit commercial solutions are expensive and almost always hardware and software closed. Approaches for open setups were published, as with modern low cost and readily available piezoelectric actuators, data acquisition interfaces and optoelectronic components building such force spectroscopy AFM is relatively easy. However, suitable software to control such laboratory made instrument was not released. Developing it in the lab requires significant time and effort. Our Nanopuller software described in this paper is intended to eliminate this obstacle. With only minimum adjustments this program can be used to control and acquire data with any suitable National Instruments universal digital/analog interface and piezoelectric actuator analog controller, giving significant freedom and flexibility in designing force spectroscopy experiment. Since the full code, written in a graphical LabVIEW environment is available, our Nanopuller can be easily customized. In this paper we describe the program and test its performance in controlling different setups. Successful and accurate force curve acquisition for standard samples (single molecules of I27O reference titin polyprotein and DNA as well as red blood cells) is shown. - Highlights: • We created open data acquisition software for performing Atomic Force Microscopy force measurements with custom laboratory made setups. • The software allows large flexibility in atomic force microscope design with minimum adjustment necessary. • The software is written in LabVIEW, allowing easy customization. • We successfully tested the program on two different hardware configurations by stretching single macromolecules and indenting cells.

Recent Progress with the KWISP Force Sensor

CERN Document Server

Cantatore, G; Hoffmann, D.H.H.; Karuza, M.; Semertzidis, Y.K.; Zioutas, K.

2015-01-01

The KWISP opto-mechanical force sensor has been built and calibrated in the INFN Trieste optics laboratory and is now under off-beam commissioning at CAST. It is designed to detect the pressure exerted by a flux of solar Chameleons on a thin (100 nm) Si$_3$N$_4$ micromembrane thanks to their direct coupling to matter. A thermally-limited force sensitivity of $1.5 \\cdot 10^{-14}~\\mbox{N}/\\sqrt{\\mbox{Hz}}$, corresponding to $7.5 \\cdot 10^{-16}~\\mbox{m}/\\sqrt{\\mbox{Hz}}$ in terms of displacement, has been obtained. An originally developed prototype chameleon chopper has been used in combination with the KWISP force sensor to conduct preliminary searches for solar chamaleons.

Simulation Based Low-Cost Composite Process Development at the US Air Force Research Laboratory

Science.gov (United States)

Rice, Brian P.; Lee, C. William; Curliss, David B.

2003-01-01

Low-cost composite research in the US Air Force Research Laboratory, Materials and Manufacturing Directorate, Organic Matrix Composites Branch has focused on the theme of affordable performance. Practically, this means that we use a very broad view when considering the affordability of composites. Factors such as material costs, labor costs, recurring and nonrecurring manufacturing costs are balanced against performance to arrive at the relative affordability vs. performance measure of merit. The research efforts discussed here are two projects focused on affordable processing of composites. The first topic is the use of a neural network scheme to model cure reaction kinetics, then utilize the kinetics coupled with simple heat transport models to predict, in real-time, future exotherms and control them. The neural network scheme is demonstrated to be very robust and a much more efficient method that mechanistic cure modeling approach. This enables very practical low-cost processing of thick composite parts. The second project is liquid composite molding (LCM) process simulation. LCM processing of large 3D integrated composite parts has been demonstrated to be a very cost effective way to produce large integrated aerospace components specific examples of LCM processes are resin transfer molding (RTM), vacuum assisted resin transfer molding (VARTM), and other similar approaches. LCM process simulation is a critical part of developing an LCM process approach. Flow simulation enables the development of the most robust approach to introducing resin into complex preforms. Furthermore, LCM simulation can be used in conjunction with flow front sensors to control the LCM process in real-time to account for preform or resin variability.

Biologic surveys for the Sandia National Laboratories, Coyote Canyon Test Complex, Kirtland Air Force Base, Albuquerque, New Mexico

Energy Technology Data Exchange (ETDEWEB)

Sullivan, R.M. [4115 Allen Dr., Kingsville, TX (United States); Knight, P.J. [Marron and Associates, Inc., Corrales, NM (United States)

1994-05-25

This report provides results of a comprehensive biologic survey performed in Coyote Canyon Test Complex (CCTC), Sandia National Laboratories (SNL), Bernalillo County, New Mexico, which was conducted during the spring and summer of 1992 and 1993. CCTC is sited on land owned by the Department of Energy (DOE) and Kirtland Air Force Base and managed by SNL. The survey covered 3,760 acres of land, most of which is rarely disturbed by CCTC operations. Absence of grazing by livestock and possibly native ungulates, and relative to the general condition of private range lands throughout New Mexico, and relative to other grazing lands in central New Mexico. Widely dispersed, low intensity use by SNL as well as prohibition of grazing has probably contributed to abundance of special status species such as grama grass cactus within the CCTC area. This report evaluates threatened and endangered species found in the area, as well as comprehensive assessment of biologic habitats. Included are analyses of potential impacts and mitigative measures designed to reduce or eliminate potential impacts. Included is a summary of CCTC program and testing activities.

International laboratory of marine radioactivity

International Nuclear Information System (INIS)

1981-08-01

The director's report presents the overall aims and objectives of the laboratory, and some of the significant findings to date. Among these is the different behaviour in oceans of Pu and Am. Thus, fallout Pu, in contrast to Am, tends to remain in the soluble form. The vertical downward transport of Am is much quicker than for Pu. Since 1980, uptake and depuration studies of sup(95m)Tc have been carried out on key marine species. Marine environmental behaviour of Tc is being evaluated carefully in view of its being a significant constituent of nuclear wastes. Growing demands are being made on the laboratory for providing intercalibration and instrument maintenance services, and for providing training for scientists from developing countries. The body of the report is divided into 5 sections dealing with marine biology, marine chemistry, marine geochemistry/sedimentation, environmental studies, and engineering services, respectively. Appendices list laboratory staff, publications by staff members, papers and reports presented at meetings or conferences, consultants to the laboratory from 1967-1980, fellowships, trainees and membership of committees, task forces and working groups

8 May 2014 - W. Watson-Wright, Assistant Director General and Executive Secretary UNESCO Intergovernmental Oceanographic Commission Assistant Director-General for the Natural Sciences Sector ad interim visiting the CMS cavern with CMS Collaboration Deputy Spkokesperson K. Borras. Adviser to the Director-General, in charge of Relations with International Organisations M. Bona present throughout.

CERN Multimedia

Brice, Maximilien

2014-01-01

Ms Wendy Watson-Wright Assistant Director General and Executive Secretary UNESCO Intergovernmental Oceanographic Commission Assistant Director-General for the Natural Sciences Sector ad interim UNESCO

Computer technology forecasting at the National Laboratories

International Nuclear Information System (INIS)

Peskin, A.M.

1980-01-01

The DOE Office of ADP Management organized a group of scientists and computer professionals, mostly from their own national laboratories, to prepare an annually updated technology forecast to accompany the Department's five-year ADP Plan. The activities of the task force were originally reported in an informal presentation made at the ACM Conference in 1978. This presentation represents an update of that report. It also deals with the process of applying the results obtained at a particular computing center, Brookhaven National Laboratory. Computer technology forecasting is a difficult and hazardous endeavor, but it can reap considerable advantage. The forecast performed on an industry-wide basis can be applied to the particular needs of a given installation, and thus give installation managers considerable guidance in planning. A beneficial side effect of this process is that it forces installation managers, who might otherwise tend to preoccupy themselves with immediate problems, to focus on longer term goals and means to their ends

Book of Abstracts from the MORS Symposium (62nd) Held in Colorado Springs, Colorado

Science.gov (United States)

1994-06-01

D. Soash The Non-Cooperative Target Identification Hughes Aircraft Company (NCTI) Program Office at Wright Laboratory initiated P.O. Box 3310 the...1 Soash , James D ........................ 51 Vassian, CDR Bob .................... 90 Solveson, Maj Keith D

Optimization of Easy Atomic Force Microscope (ezAFM) Controls for Semiconductor Nanostructure Profiling

Science.gov (United States)

2017-09-01

ARL-MR-0965 ● SEP 2017 US Army Research Laboratory Optimization of Easy Atomic Force Microscope (ezAFM) Controls for... Optimization of Easy Atomic Force Microscope (ezAFM) Controls for Semiconductor Nanostructure Profiling by Satwik Bisoi Science and...REPORT TYPE Memorandum Report 3. DATES COVERED (From - To) 2017 July 05–2017 August 18 4. TITLE AND SUBTITLE Optimization of Easy Atomic Force

Atomic Force Microscope

Energy Technology Data Exchange (ETDEWEB)

Day, R.D.; Russell, P.E.

1988-12-01

The Atomic Force Microscope (AFM) is a recently developed instrument that has achieved atomic resolution imaging of both conducting and non- conducting surfaces. Because the AFM is in the early stages of development, and because of the difficulty of building the instrument, it is currently in use in fewer than ten laboratories worldwide. It promises to be a valuable tool for obtaining information about engineering surfaces and aiding the .study of precision fabrication processes. This paper gives an overview of AFM technology and presents plans to build an instrument designed to look at engineering surfaces.

Twenty years of an international nuclear laboratory

International Nuclear Information System (INIS)

Suschny, O.

1982-01-01

The laboratories of the International Atomic Energy Agency were started in 1959 with a physics laboratory, a chemistry laboratory and an electronics workshop. Early work centred on absolute radionuclide calibrations and on assessments of the consequences of radioactive fallout from atomic weapons testing on the health of the people in Member States. Subsequently, work was started on the use of radioactive and stable isotopes in agriculture, in hydrology, in medical applications, in pest and insect control and with the entry into force of the Nuclear Non-Proliferation Treaty a Safeguard Analytical Laboratory was established to provide support for the Agency's safeguards inspection responsibilities. Together with WHO a network of 43 Secondary Standard Dosimetry Laboratories were set up in Member States to improve dosimetric accuracy in medicine and radiation protection worldwide. Throughout their history, the laboratories of the IAEA have lent great importance on their training programmes that have enabled many workers in nuclear or nuclear related research to gain experience. This emphasis on training has been stressed particularly to benefit research workers from developing countries

Engineered Surfaces to Control Secondary Electron Yield for Multipactor Suppression

Science.gov (United States)

2017-09-14

Air Force Institute of Technology AFIT Scholar Theses and Dissertations 9-14-2017 Engineered Surfaces to Control Secondary Electron Yield for...Multipactor Suppression James M. Sattler Follow this and additional works at: https://scholar.afit.edu/etd Part of the Electrical and Electronics Commons... TECHNOLOGY Wright-Patterson Air Force Base, Ohio DISTRIBUTION STATEMENT A. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED

CSI flight experiment projects of the Naval Research Laboratory

Science.gov (United States)

Fisher, Shalom

1993-02-01

The Naval Research Laboratory (NRL) is involved in an active program of CSI flight experiments. The first CSI flight experiment of the Naval Research Laboratory, the Low Power Atmospheric Compensation Experiment (LACE) dynamics experiment, has successfully measured vibrations of an orbiting satellite with a ground-based laser radar. The observations, made on January 7, 8 and 10, 1991, represent the first ever measurements of this type. In the tests, a narrowband heterodyne CO2 laser radar, operating at a wavelength of 10.6 microns, detected vibration induced differential-Doppler signatures of the LACE satellite. Power spectral densities of forced oscillations and modal frequencies and damping rates of free-damped vibrations were obtained and compared with finite element structural models of the LACE system. Another manifested flight experiment is the Advanced Controls Technology Experiment (ACTEX) designed to demonstrate active and passive damping with piezo-electric (PZT) sensors and actuators. This experiment was developed under the management of the Air Force Phillips Laboratory with integration of the experiment at NRL. It is to ride as a secondary, or 'piggyback,' experiment on a future Navy satellite.

Forced draft wet cooling systems

International Nuclear Information System (INIS)

Daubert, A.; Caudron, L.; Viollet, P.L.

1975-01-01

The disposal of the heat released from a 1000MW power plant needs a natural draft tower of about 130m of diameter at the base, and 170m height, or a cooling system with a draft forced by about forty vans, a hundred meters in diameter, and thirty meters height. The plumes from atmospheric cooling systems form, in terms of fluid mechanics, hot jets in a cross current. They consist in complex flows that must be finely investigated with experimental and computer means. The study, currently being performed at the National Hydraulics Laboratory, shows that as far as the length and height of visible plumes are concerned, the comparison is favorable to some types of forced draft cooling system, for low and medium velocities, (below 5 or 6m/s at 10m height. Beyond these velocities, the forced draft sends the plume up to smaller heights, but the plume is generally more dilute [fr

Application of a Brittle Damage Model to Normal Plate-on-Plate Impact

National Research Council Canada - National Science Library

Raftenberg, Martin N

2005-01-01

A brittle damage model presented by Grinfeld and Wright of the U.S. Army Research Laboratory was implemented in the LS-DYNA finite element code and applied to the simulation of normal plate-on-plate impact...

Detecting chameleons through Casimir force measurements

International Nuclear Information System (INIS)

Brax, Philippe; Bruck, Carsten van de; Davis, Anne-Christine; Shaw, Douglas; Mota, David F.

2007-01-01

The best laboratory constraints on strongly coupled chameleon fields come not from tests of gravity per se but from precision measurements of the Casimir force. The chameleonic force between two nearby bodies is more akin to a Casimir-like force than a gravitational one: The chameleon force behaves as an inverse power of the distance of separation between the surfaces of two bodies, just as the Casimir force does. Additionally, experimental tests of gravity often employ a thin metallic sheet to shield electrostatic forces; however, this sheet masks any detectable signal due to the presence of a strongly coupled chameleon field. As a result of this shielding, experiments that are designed to specifically test the behavior of gravity are often unable to place any constraint on chameleon fields with a strong coupling to matter. Casimir force measurements do not employ a physical electrostatic shield and as such are able to put tighter constraints on the properties of chameleons fields with a strong matter coupling than tests of gravity. Motivated by this, we perform a full investigation on the possibility of testing chameleon models with both present and future Casimir experiments. We find that present-day measurements are not able to detect the chameleon. However, future experiments have a strong possibility of detecting or rule out a whole class of chameleon models

Making Sparklers: An Introductory Laboratory Experiment

Science.gov (United States)

Keeney, Allen; Walters, Christina; Cornelius, Richard D.

1995-07-01

A laboratory experiment consisting of the preparation of sparklers has been developed as part of a project which organizes the general chemistry sequence according to subjects with which students are familiar. This laboratory makes use of oxidation/reduction chemistry to produce a product familiar to students. The result is a mixture rather than a compound, but the composition must be carefully measured to produce a sparkler that will stay lit and produce sparks. The dramatic reaction may be the most impressive and memorable experience that students encounter in the laboratory. Sparklers are formulated from iron, magnesium, and aluminum powders, plus potassium chlorate and barium nitrate held on thick iron wire by a starch paste. At elevated temperatures metal nitrates and chlorates decompose to produces gases, providing the necessary force to eject bits of powdered, burning metal into the air.

Alternative Energy Sources for United States Air Force Installations

Science.gov (United States)

1975-08-01

applications were developed for the vertical- axis rotor, the concept never became popular. Interest was renewed in the Darrieus type wind turbine when the...chordwise lift force is greater than the chorcwise drag force (ref. 30). The Darrieus wind turbine offers the follwing advantages relative to the more...Laboratories, New Mexico, May 1974. 105 lAFWL-TR-75- 193 REFERENCES (Cont’d) 32. Banas, J. F., et al., Application of Darrieus Vertical - Axis Wind Turbine to

El Guggenheim Museum de New York. Interpretación del papel de la estructura a través de la colaboración entre Frank Lloyd Wright y Jaroslav J. Polivka

OpenAIRE

Martin Saiz, Diego

2012-01-01

Arquitectura y estructura han ido siempre íntimamente ligadas, pero con la aparición del acero y el hormigón surgieron nuevas necesidades formales o estéticas. El Estilo Internacional se inclinó por separar la retícula estructural de los cerramientos. En cambio, la Escuela de Chicago forjó las bases de una arquitectura optimizada y racional. Frank Lloyd Wright, entre estas dos situaciones, optó por seguir las pautas naturales de los materiales, de forma “orgánica”, recuperan...

Subtask 3.9 - Direct Coal Liquefaction Process Development

Energy Technology Data Exchange (ETDEWEB)

Aulich, Ted; Sharma, Ramesh

2012-07-01

The Energy and Environmental Research Center (EERC), in partnership with the U.S. Department of Energy (DOE) and Accelergy Corporation, an advanced fuels developer with technologies exclusively licensed from ExxonMobil, undertook Subtask 3.9 to design, build, and preliminarily operate a bench-scale direct coal liquefaction (DCL) system capable of converting 45 pounds/hour of pulverized, dried coal to a liquid suitable for upgrading to fuels and/or chemicals. Fabrication and installation of the DCL system and an accompanying distillation system for off-line fractionation of raw coal liquids into 1) a naphtha middle distillate stream for upgrading and 2) a recycle stream was completed in May 2012. Shakedown of the system was initiated in July 2012. In addition to completing fabrication of the DCL system, the project also produced a 500-milliliter sample of jet fuel derived in part from direct liquefaction of Illinois No. 6 coal, and submitted the sample to the Air Force Research Laboratory (AFRL) at Wright Patterson Air Force Base, Dayton, Ohio, for evaluation. The sample was confirmed by AFRL to be in compliance with all U.S. Air Force-prescribed alternative aviation fuel initial screening criteria.

Unattended power sources for remote, harsh environments

International Nuclear Information System (INIS)

Lamp, T.R.; Donovan, B.D.

1994-01-01

Forest fires that have endangered remote US Air Force sites equipped with radioisotope thermoelectric generators (RTGs) has prompted the assessment of power generating systems as substitutes for RTGs in small scale (10--120 watt) applications. A team of scientists and engineers of the US Air Forces' Wright Laboratory conducted an assessment of electrical power technologies for use by the Air Force in remote, harsh environments. The surprisingly high logistic costs of operating fossil fuel generators resulted in the extension of the assessment to non-RTG sites. The candidate power sources must operate unattended for long periods at a high level of operations reliability. Selection of the optimum power generation technology is complicated and heavily driven by the severe operating environment compounded by the remoteness of the location. It is these site-related characteristics, more than any other, that drive the selection of a safe and economical power source for Arctic applications. A number of proven power generation technologies were evaluated. The assessment concluded that continued use of the RTGs is clearly the safest, most reliable, and most economical approach to supplying electrical power for remote, difficult to access locations

Catastrophic antiphospholipid syndrome: task force report summary.

Science.gov (United States)

Cervera, R; Rodríguez-Pintó, I

2014-10-01

The Task Force on Catastrophic Antiphospholipid Syndrome (CAPS) aimed to assess the current knowledge on pathogenesis, clinical and laboratory features, diagnosis and classification, precipitating factors and treatment of CAPS. This article summarizes the main aspects of its final report. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Unified Technical Concepts. Module 8: Force Transformers.

Science.gov (United States)

Technical Education Research Center, Waco, TX.

This concept module on force transformers is one of thirteen modules that provide a flexible, laboratory-based physics instructional package designed to meet the specialized needs of students in two-year, postsecondary technical schools. Each of the thirteen concept modules discusses a single physics concept and how it is applied to each energy…

Argonne National Lab deploys Force10 networks' massively dense ethernet switch for supercomputing cluster

CERN Multimedia

2003-01-01

"Force10 Networks, Inc. today announced that Argonne National Laboratory (Argonne, IL) has successfully deployed Force10 E-Series switch/routers to connect to the TeraGrid, the world's largest supercomputing grid, sponsored by the National Science Foundation (NSF)" (1/2 page).

Ambulatory measurement of ground reaction force and estimation of ankle and foot dynamics

NARCIS (Netherlands)

Schepers, H. Martin; Koopman, Hubertus F.J.M.; Baten, Christian T.M.; Veltink, Petrus H.

INTRODUCTION Traditionally, human body movement analysis is done in so-called ‘gait laboratories’. In these laboratories, body movement is measured by a camera system using optical markers, the ground reaction force by a force plate fixed in the floor, and the muscle activity by EMG. From the body

Keeping the Edge. Air Force Materiel Command Cold War Context (1945-1991). Volume 1: Command Lineage Scientific Achievement and Major Tenant Missions

Science.gov (United States)

2003-08-01

Cambridge Research Laboratories AFCS Air Force Communications Service AFETR Air Force Eastern Test Range AFFDL Air Force Flight Dynamics Laboratory...Sacramento Air Logistics Center SMAMA Sacramento Air Materiel Area SOM Skidmore, Owings & Merrill SPACERAD Space Radiation Effects SPADATS Space...a unique post-World War II phenomenon that had a lasting effect —addressed here to illustrate some of the subtleties of the earliest Cold War years

Characterization and Modeling of a Control Moment Gyroscope

Science.gov (United States)

2015-03-26

pre- conditioner for the input state before passing into the inner loop, as shown in Figure 30. In Figure 30, m is the motor angle and x is the state...Characterization and Modeling of a Control Moment Gyroscope THESIS 2d Lt, Dylan Penn, B.S. AFIT-ENY-MS-15-M-235 DEPARTMENT OF THE AIR FORCE AIR ...UNIVERSITY AIR FORCE INSTITUTE OF TECHNOLOGY Wright-Patterson Air Force Base, Ohio DISTRIBUTION STATEMENT A APPROVED FOR PUBLIC RELEASE; DISTRIBUTION

The Synthesis of Force Closure Grasps in the Plane.

Science.gov (United States)

1985-09-01

TASK U Artificial Inteligence Laboratory AREA A WORK UN IT "NMUIERS ~( 545 Technology Square Cambridge, MA 02139 SI. CONTROLLING OFICE NAME ANO... ARTIFICIAL INThLLIX’ ENCE LABORATORY A. 1. Memo 861 September, 1985 The Synthesis of Force-Closure Grasps In the Plane DTIC ’VeL% ,#ECTE 1 VnDcNguyenU Abstract... Artificial In- telligenmcc Liabomatory of thle Massachuset Is hInsttute of Teclhnolog3 . Support for the Lahoratot * s Artificial Intelligence research is

The changing face of clinical laboratories.

Science.gov (United States)

Plebani, M

1999-07-01

Laboratory medicine has undergone a sea change, and medical laboratories must now adapt to, and meet new, customer-supplier needs springing from shifts in the patterns of disease prevalence, medical practice, and demographics. Managed care and other cost-containment processes have forced those involved in health care to cooperate to develop a full picture of patient care, and this has affected clinical laboratory objectives, the main focus now being on improvement in medical outcomes. More recently, the resource shortages in health care and results of cost/effectiveness analysis have demonstrated that the value of a laboratory test must be ascertained not only on the basis of its chemical or clinical performance characteristics, but also by its impact on patient management, the only true assessment of the quality of testing being quality of patient outcomes. The time is ripe for changing the vision of laboratory medicine, and some of the reasons for this are the availability of results in real-time, the introduction of more specific tests, and the trend to prevent diseases rather than cure them. The information from laboratory tests designed to evaluate biochemical or genetic risk and/or prognostic factors cannot be replaced either by physical examination and/or the assessment of symptoms. Today, the importance of laboratory scientists must be proven in three broad areas: a) guaranteeing the quality of tests, irrespective of where they are performed; b) improving the quality of the service; c) maximizing the impact of laboratory information on patient management.

Examining U.S. Irregular Warfare Doctrine

Science.gov (United States)

2008-06-01

Muslim leaders, this manual also provides inspiration to the Al-Qaeda undercover member. These are especially useful in convincing the young...A “Air Power: An Enduring Illusion,” The Economist (24 August 2006). Accessed via: http://www.economist.com/world/displaystory.cfm?story_id...USA AFIT/ILM/ENS/08-04 DEPARTMENT OF THE AIR FORCE AIR UNIVERSITY AIR FORCE INSTITUTE OF TECHNOLOGY Wright-Patterson

76 FR 55933 - Federal Property Suitable as Facilities To Assist the Homeless

Science.gov (United States)

2011-09-09

... written expression of interest to HHS, addressed to Theresa Ritta, Division of Property Management... Management Division, Naval Facilities Engineering Command, Washington Navy Yard, 1330 Patterson Ave., SW... Area Ohio Facility 30089 5490 Pearson Wright Patterson AFB OH 45433 Landholding Agency: Air Force...

Laboratory diagnosis of tick-borne African relapsing fevers: latest developments

Directory of Open Access Journals (Sweden)

Aurélien eFotso Fotso

2015-11-01

Full Text Available In Africa, relapsing fevers caused by ectoparasite-borne Borrelia species are transmitted by ticks, with the exception of Borrelia recurrentis, which is a louse-borne spirochete. These tropical diseases responsible for mild to deadly spirochetemia. Cultured B. crocidurae, B. duttonii and B. hispanica circulate alongside at least six species which have not yet been cultured in vectors. Direct diagnosis is hindered by the use of non-specific laboratory tools. Indeed, microscopic observation of Borrelia spirochaeta in smears of peripheral blood taken from febrile patients lacks sensitivity and specificity. Although best visualised using dark-field microscopy, the organisms can also be detected using Wright-Giemsa or acridine orange stains.. PCR-based detection of specific sequences in total DNA extracted from a specimen can be used to discriminate different relapsing fever Borreliae. In our laboratory, we developed a multiplex real-time PCR assay for the specific detection of B. duttonii/recurrentis and B. crocidurae: Multispacer Sequence Typing accurately identified cultured relapsing fever borreliae and revealed diversity among them. Other molecular typing techniques, such as multilocus sequence analysis of tick-borne relapsing fever borreliae, showed the potential risk of human infection in Africa. Recent efforts to culture and sequence relapsing fever borreliae have provided new information for reassessment of the diversity of these bacteria. Recently, matrix-assisted laser desorption ionization time-of-flight mass spectrometry has been reported as a means of identifying cultured borreliae and of identifying both vectors and vectorised pathogens such as detecting relapsing fever borreliae directly in ticks. The lack of a rapid diagnosis test restricts the management of such diseases. We produced monoclonal antibodies against Borrelia crocidurae in order to develop cheap assays for the rapid detection of relapsing fever borreliae. In this paper

Tailoring of targets for a tandem accelerator laboratory

International Nuclear Information System (INIS)

Sletten, G.

1976-01-01

The organization of a target laboratory serving the nuclear physics research at a tandem van de graaff accelerator is described. Emphasis is put on the layout of the laboratory and the mode of operation. The working force is about 40 h per week shared by two technical assistants, and they are supervised by a physicist who on the average spends about 1/3 of his time on target-related problems. Selected topics like heavy ion sputtering of actinides and the preparation of multilayer targets are described in detail. (author)

Mathematical modelling of fire in forced ventilated enclosures

International Nuclear Information System (INIS)

Cox, G.; Kumar, S.

1985-01-01

The application of a computer fire simulation model to the prediction of conditions in a forced ventilated experimental fire test cell at the Lawrence Livermore National Laboratory is discussed. Comparisons between theoretical and experimental determinations are shown to be in reasonable agreement and areas requiring further research indicated

Probing into the Secret of the Chinese Air Force.

Science.gov (United States)

1983-11-30

Ri35 968 PROBING INTO THE SECRET OF THE CHINESE AIR FOREE(IJ 1/2 FOREIGN TECHNOLOGY DIV WRIGHT-PATTERSON RFB OH 9 38 NOV 83 FTD-ID(,RS)T 1088 3...FOREIGN TECHNOLOGY DIVISION. PROBING INTO THE SECRET OF THE CHINESE AIRFORCE CL1 Approved for public re.lease; distribution unlimited C=)X ~ EET...MICROFICHE NR: FTD-83-C-001469 PROBING INTO THE SECRET OF THE CHINESE AIRFORCE -" -English pages: 111 Source: Enclosure to IR 6 842 0088 83-Booklet

Science and Technology: The Making of the Air Force Research Laboratory

Science.gov (United States)

2000-01-01

realize the long- term consequences of this dramatic event. Air Force leaders had unwit t ingly planted seeds that would grow into a s ingle Air...Nevertheless, Paul’s contribution was extremely s ignif icant because he had planted the seed and made the recommendation for a single lab...was cordia l and a l l bus i- ness as the smal l bu t in f luen t ia l group took their seats. Mr. Money and General Muellner were pre- sent

Production and Optimization of Direct Coal Liquefaction derived Low Carbon-Footprint Transportation Fuels

Energy Technology Data Exchange (ETDEWEB)

Steven Markovich

2010-06-30

This report summarizes works conducted under DOE Contract No. DE-FC26-05NT42448. The work scope was divided into two categories - (a) experimental program to pretreat and refine a coal derived syncrude sample to meet transportation fuels requirements; (b) system analysis of a commercial scale direct coal liquefaction facility. The coal syncrude was derived from a bituminous coal by Headwaters CTL, while the refining study was carried out under a subcontract to Axens North America. The system analysis included H{sub 2} production cost via six different options, conceptual process design, utilities requirements, CO{sub 2} emission and overall plant economy. As part of the system analysis, impact of various H{sub 2} production options was evaluated. For consistence the comparison was carried out using the DOE H2A model. However, assumptions in the model were updated using Headwaters database. Results of Tier 2 jet fuel specifications evaluation by the Fuels & Energy Branch, US Air Force Research Laboratory (AFRL/RZPF) located at Wright Patterson Air Force Base (Ohio) are also discussed in this report.

Coriolis force and Sagnac effect

International Nuclear Information System (INIS)

Gogberashvili, Merab

2002-02-01

The optical Sagnac effect is considered, when the fictitious gravitational field simulates the reflections from the mirrors. It is shown that no contradiction exists between the conclusions of the laboratory and rotated observers. Because of the acting of gravity-like Coriolis force the trajectories of co- and anti-rotating photons have different radii in the rotating reference frame, while in the case of the equal radius the effective gravitational potentials for the photons have to be different. (author)

Do centrioles generate a polar ejection force?

Science.gov (United States)

Wells, Jonathan

2005-01-01

A microtubule-dependent polar ejection force that pushes chromosomes away from spindle poles during prometaphase is observed in animal cells but not in the cells of higher plants. Elongating microtubules and kinesin-like motor molecules have been proposed as possible causes, but neither accounts for all the data. In the hypothesis proposed here a polar ejection force is generated by centrioles, which are found in animals but not in higher plants. Centrioles consist of nine microtubule triplets arranged like the blades of a tiny turbine. Instead of viewing centrioles through the spectacles of molecular reductionism and neo-Darwinism, this hypothesis assumes that they are holistically designed to be turbines. Orthogonally oriented centriolar turbines could generate oscillations in spindle microtubules that resemble the motion produced by a laboratory vortexer. The result would be a microtubule-mediated ejection force tending to move chromosomes away from the spindle axis and the poles. A rise in intracellular calcium at the onset of anaphase could regulate the polar ejection force by shutting down the centriolar turbines, but defective regulation could result in an excessive force that contributes to the chromosomal instability characteristic of most cancer cells.

Force control of a robot for surface contamination detection

International Nuclear Information System (INIS)

Petterson, B.J.; Jones, J.F.

1987-01-01

A system is under development at Sandia National Laboratories for use in understanding the issues relating to automated robotic handling of spent nuclear fuel shipping casks. The goal of robotic handling is reduction of personnel radiation exposure at the proposed geologic repositories. One of the major technology development areas has been the integration of sensors into the control of the robot system to allow operation in semi-structured environments. In particular, a multiaxis force sensor is used to make robot trajectory corrections based on the contact force between the robot and workpiece. This force feedback system allows contact swipes (smears) to be made on the cask surface in a repeatable manner. 8 refs., 3 figs

Forced-air warming design: evaluation of intake filtration, internal microbial buildup, and airborne-contamination emissions.

Science.gov (United States)

Reed, Mike; Kimberger, Oliver; McGovern, Paul D; Albrecht, Mark C

2013-08-01

Forced-air warming devices are effective for the prevention of surgical hypothermia. However, these devices intake nonsterile floor-level air, and it is unknown whether they have adequate filtration measures to prevent the internal buildup or emission of microbial contaminants. We rated the intake filtration efficiency of a popular current-generation forced-air warming device (Bair Hugger model 750, Arizant Healthcare) using a monodisperse sodium chloride aerosol in the laboratory. We further sampled 23 forced-air warming devices (same model) in daily hospital use for internal microbial buildup and airborne-contamination emissions via swabbing and particle counting. Laboratory testing found the intake filter to be 63.8% efficient. Swabbing detected microorganisms within 100% of the forced-air warming blowers sampled, with isolates of coagulase-negative staphylococci, mold, and micrococci identified. Particle counting showed 96% of forced-air warming blowers to be emitting significant levels of internally generated airborne contaminants out of the hose end. These findings highlight the need for upgraded intake filtration, preferably high-efficiency particulate air filtration (99.97% efficient), on current-generation forced-air warming devices to reduce contamination buildup and emission risks.

Gamification of the Laboratory Experience to Encourage Student Engagement

Directory of Open Access Journals (Sweden)

Kevin Drace

2013-08-01

Full Text Available The American Society for Microbiology (ASM Task Force on Curriculum Guidelines for Undergraduate Microbiology Students published recommendations for introductory microbiology courses that suggest teaching specific skill sets in the laboratory beyond just fundamental knowledge and concepts of microbiology (6; however, students can sometimes view a skills-based laboratory experience as a task list of unrelated assignments to complete for a grade. Therefore, providing explicit connections throughout the lecture and laboratory exercises is critical for a truly integrated learning experience. Several pedagogical techniques can provide a coherent framework throughout a course. For example, case-based studies can connect lecture with laboratory skills and increase student engagement by applying newly developed knowledge and skills to tackle real-world simulations (2, 3. One reason that case-based studies succeed is that they can provide intrinsic motivations and an alternate purpose for students to engage with the material. A more recent trend in pedagogy involves using game design elements to increase student engagement and motivation. Gamification is the application of game design (accruing points or badges, reaching significant levels of accomplishment, or other reward elements in a non-game context to motivate or influence participation (1, 5. A natural extension of both of these methods is to gamify a case-based approach where a fictional scenario is presented for students to role-play as scientists using their developed skills to solve a complex problem. The typical microbiology laboratory, as described by the ASM Task Force, can easily incorporate game design elements without extensive modification of the exercises themselves. Instead, gamification involves structuring the lab in a way that gives the course a coherent and unified purpose. This ultimately allows the student to see how the principles and concepts of lecture and laboratory connect

Treatability Study in Support of the Intrinsic Remediation Option at the Current Fire Training Area, Westover Air Reserves Base, Chicopee, Massachusetts

Science.gov (United States)

1997-02-01

Winter, 1987, p. 64-71. Bartha , R., 1986, Biotechnology of petroleum pollutant biodegradation: Microbial Ecology , vol. 12, p. 155-172. Bauman, B., 1991...Prepared for Air Force Systems Command, Wright-Patterson Air Force Base, Ohio, June. Atlas , R.M., 1981, Microbial degradation of petroleum hydrocarbons...of jet fuel and gasoline, including the BTEX compounds (e.g., lamison et at., 1975; Atlas , 1981, 1984, 1988; Gibson and Subramanian, 1984; Reinhard et

The Digital Thread as the Key Enabler

Science.gov (United States)

2016-11-01

Inject pivot points into acquisition allowing for programs to change direction based upon advances in technology, changes in threat environment...engineering and technical management for the Air Force Materiel Command at Wright-Patterson Air Force Base in Ohio. Y ou are down in the trenches trying to...workforce requires the right training, data, physics- based tools and facilities. Owning the technical baseline is one of the five priorities of the

Strategies for laboratory cost containment and for pathologist shortage: centralised pathology laboratories with microwave-stimulated histoprocessing and telepathology.

Science.gov (United States)

Leong, Anthony S Y; Leong, F Joel W M

2005-02-01

The imposition of laboratory cost containment, often from external forces, dictates the necessity to develop strategies to meet laboratory cost savings. In addition, the national and worldwide shortage of anatomical pathologists makes it imperative to examine our current practice and laboratory set-ups. Some of the strategies employed in other areas of pathology and laboratory medicine include improvements in staff productivity and the adoption of technological developments that reduce manual intervention. However, such opportunities in anatomical pathology are few and far between. Centralisation has been an effective approach in bringing economies of scale, the adoption of 'best practices' and the consolidation of pathologists, but this has not been possible in anatomical pathology because conventional histoprocessing takes a minimum of 14 hours and clinical turnaround time requirements necessitate that the laboratory and pathologist be in proximity and on site. While centralisation of laboratories for clinical chemistry, haematology and even microbiology has been successful in Australia and other countries, the essential requirements for anatomical pathology laboratories are different. In addition to efficient synchronised courier networks, a method of ultra-rapid tissue processing and some expedient system of returning the prepared tissue sections to the remote laboratory are essential to maintain the turnaround times mandatory for optimal clinical management. The advent of microwave-stimulated tissue processing that can be completed in 30-60 minutes and the immediate availability of compressed digital images of entire tissue sections via telepathology completes the final components of the equation necessary for making centralised anatomical pathology laboratories a reality.

Invisible force

International Nuclear Information System (INIS)

Panek, Richard

2010-01-01

Astronomers have compiled evidence that what we always thought of as the actual universe- all the planets, stars, galaxies and matter in space -represents a mere 4% of what's out there. The rest is dark: 23% is called dark matter, 73% dark energy. Scientists have ideas about what dark matter is, but hardly any understanding about dark energy. This has led to rethinking traditional physics and cosmology. Assuming the existence of dark matter and that the law of gravitation is universal, two teams of astrophysicists, from Lawrence Berkeley National Laboratory and the Australian National University, analysed the universe's growth and to their surprise both concluded that the universe expansion is not slowing but speeding up. If the dominant force of evolution isn't gravity what is it?

Forest Products Laboratory : supporting the nation's armed forces with valuable wood research for 90 years

Science.gov (United States)

Christopher D. Risbrudt; Robert J. Ross; Julie J. Blankenburg; Charles A. Nelson

2007-01-01

Founded in 1910 by the U.S. Forest Service to serve as a centralized, national wood research laboratory, the USDA Forest Products Laboratory (FPL) has a long history of providing technical services to other government agencies, including those within the Defense (DoD). A recent search of FPL’s library and correspondence files revealed that approximately 10,000...

Forces and moments on a slender, cavitating body

Energy Technology Data Exchange (ETDEWEB)

Hailey, C.E.; Clark, E.L.; Buffington, R.J.

1988-01-01

Recently a numerical code has been developed at Sandia National Laboratories to predict the pitching moment, normal force, and axial force of a slender, supercavitating shape. The potential flow about the body and cavity is calculated using an axial distribution of source/sink elements. The cavity surface is assumed to be a constant pressure streamline, extending beyond the base of the model. Slender body approximation is used to model the crossflow for small angles of attack. A significant extension of previous work in cavitation flow is the inclusion of laminar and turbulent boundary layer solutions on the body. Predictions with this code, for axial force at zero angle of attack, show good agreement with experiments. There are virtually no published data availble with which to benchmark the pitching moment and normal force predictions. An experiment was designed to measure forces and moments on a supercavitation shape. The primary reason for the test was to obtain much needed data to benchmark the hydrodynamic force and moment predictions. Since the numerical prediction is for super cavitating shapes at very small cavitation numbers, the experiment was designed to be a ventilated cavity test. This paper describes the experimental procedure used to measure the pitching moment, axial and normal forces, and base pressure on a slender body with a ventilated cavity. Limited results are presented for pitching moment and normal force. 5 refs., 7 figs.

Optical Beam Deflection Based AFM with Integrated Hardware and Software Platform for an Undergraduate Engineering Laboratory

Directory of Open Access Journals (Sweden)

Siu Hong Loh

2017-02-01

Full Text Available Atomic force microscopy (AFM has been used extensively in nanoscience research since its invention. Recently, many teaching laboratories in colleges, undergraduate institutions, and even high schools incorporate AFM as an effective teaching tool for nanoscience education. This paper presents an optical beam deflection (OBD based atomic force microscope, designed specifically for the undergraduate engineering laboratory as a teaching instrument. An electronic module for signal conditioning was built with components that are commonly available in an undergraduate electronic laboratory. In addition to off-the-shelf mechanical parts and optics, the design of custom-built mechanical parts waskept as simple as possible. Hence, the overall cost for the setup is greatly reduced. The AFM controller was developed using National Instruments Educational Laboratory Virtual Instrumentation Suite (NI ELVIS, an integrated hardware and software platform which can be programmed in LabVIEW. A simple yet effective control algorithm for scanning and feedback control was developed. Despite the use of an educational platform and low-cost components from the undergraduate laboratory, the developed AFM is capable of performing imaging in constant-force mode with submicron resolution and at reasonable scanning speed (approximately 18 min per image. Therefore, the AFM is suitable to be used as an educational tool for nanoscience. Moreover, the construction of the system can be a valuable educational experience for electronic and mechanical engineering students.

Laboratory for X-Ray Optics

Science.gov (United States)

1993-04-29

Kearney, "El uso de las pelfculas delgadas en la optica de rayos - x ," Proc. Symposium on the Physics of Superlattices, May 1991, in press. 6. J.M...Bolling Air Force Base ELEMENT NO. NO. NO ACCESSION NO Washin ton, D.C. 20332- //( ~ ~ C 11. TITLE (Incluft Security Claw ffation) [ TLaboratory for X ...three years under contract AFOSR-90-O 140, "Laboratory for X -Ray O.ptics. Duig thspro we concenrae our effrt in two areas: 1) grwth of epitaxial

Aespoe Hard Rock Laboratory. Annual Report 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-04-01

The construction of the laboratory was completed during 1995 and the operating phase has now begun. During the construction data has been collected from the tunnel and boreholes drilled from the tunnel. Results from these investigations have been reported and a comprehensive evaluation is in progress. The results will be used to design the site characterization program for the deep repository. Ten organizations from nine countries participate in the work at the laboratory. An important part of the cooperative work is performed within the framework of the task force on groundwater flow and transport of solutes. An evaluation has been made of the long term pumping test which was performed at Aespoe some years ago. It showed that the modelling tools that exist today have the ability to give a three-dimensional description of groundwater flow at a site like Aespoe. The task force will perform predictive modelling of the tracer experiments performed within the TRUE project. Characterization of the experimental site for TRUE and preparations for the tracer tests were completed during 1995. Tests of the engineering barriers have been started with the test of technology for backfilling of deposition tunnels. 55 refs, 36 figs, 7 tabs.

Aespoe Hard Rock Laboratory. Annual Report 1995

International Nuclear Information System (INIS)

1996-04-01

The construction of the laboratory was completed during 1995 and the operating phase has now begun. During the construction data has been collected from the tunnel and boreholes drilled from the tunnel. Results from these investigations have been reported and a comprehensive evaluation is in progress. The results will be used to design the site characterization program for the deep repository. Ten organizations from nine countries participate in the work at the laboratory. An important part of the cooperative work is performed within the framework of the task force on groundwater flow and transport of solutes. An evaluation has been made of the long term pumping test which was performed at Aespoe some years ago. It showed that the modelling tools that exist today have the ability to give a three-dimensional description of groundwater flow at a site like Aespoe. The task force will perform predictive modelling of the tracer experiments performed within the TRUE project. Characterization of the experimental site for TRUE and preparations for the tracer tests were completed during 1995. Tests of the engineering barriers have been started with the test of technology for backfilling of deposition tunnels. 55 refs, 36 figs, 7 tabs

A Force Transducer from a Junk Electronic Balance

Science.gov (United States)

Aguilar, Horacio Munguia; Aguilar, Francisco Armenta

2009-01-01

It is shown how the load cell from a junk electronic balance can be used as a force transducer for physics experiments. Recovering this device is not only an inexpensive way of getting a valuable laboratory tool but also very useful didactic work on electronic instrumentation. Some experiments on mechanics with this transducer are possible after a…

Oak Ridge National Laboratory Waste Management Plan

International Nuclear Information System (INIS)

1992-12-01

The objective of the Oak Ridge National Laboratory Waste Management Plan is to compile and to consolidate information annually on how the ORNL Waste Management Program is conducted, which waste management facilities are being used to manage wastes, what forces are acting to change current waste management systems, what activities are planned for the forthcoming fiscal year (FY), and how all of the activities are documented

Oak Ridge National Laboratory Waste Management Plan

Energy Technology Data Exchange (ETDEWEB)

1992-12-01

The objective of the Oak Ridge National Laboratory Waste Management Plan is to compile and to consolidate information annually on how the ORNL Waste Management Program is conducted, which waste management facilities are being used to manage wastes, what forces are acting to change current waste management systems, what activities are planned for the forthcoming fiscal year (FY), and how all of the activities are documented.

In Vivo Force Decay of Niti Closed Coil Springs

Science.gov (United States)

Cox, Crystal; Nguyen, Tung; Koroluk, Lorne; Ko, Ching-Chang

2014-01-01

Introduction Nickel-titanium (NiTi) closed coil springs are purported to deliver constant forces over extended ranges of activation and working times. In vivo studies supporting this claim are limited. The objective of this study is to evaluate changes in force decay properties of NiTi closed coil springs after clinical use. Methods Pseudoelastic force-deflection curves for 30 NiTi coil springs (used intra-orally) and 15 matched laboratory control springs (simulated intra-oral conditions - artificial saliva, 37°C) were tested pre- and post-retrieval via Dynamic Mechanical Analysis (DMA) and the Instron machine, respectively, to evaluate amount of force loss and hysteresis change following 4, 8, or 12 weeks of working time (n=10 per group). Effect of the oral environment and clinical use on force properties were evaluated by comparing in vivo and in vitro data. Results The springs studied showed a statistically significant decrease in force (~12%) following 4 weeks of clinical use (pspace closure at an average rate of 0.91mm per month was still observed despite this decrease in force. In vivo and in vitro force loss data were not statistically different. Conclusions NiTi closed coil springs do not deliver constant forces when used intra-orally, but they still allow for space closure rates of ~1mm/month. PMID:24703289

On the Effectiveness of the Dynamic Force Adjustment for Reducing the Scatter of Instrumented Charpy Results

International Nuclear Information System (INIS)

Lucon, E.

2008-01-01

One of the key factors for obtaining reliable instrumented Charpy results is the calibration of the instrumented striker. An interesting alternative to the conventional static calibration recommended by the standards is the Dynamic Force Adjustment (DFA), in which forces and displacements are iteratively adjusted until equality is achieved between absorbed energies calculated under the test record (Wt) and measured by the machine encoder (KV). In this study, this procedure has been applied to the instrumented data obtained by 10 international laboratories using notched and precracked Charpy specimens, in the framework of a Coordinated Research Project (CRP8) of IAEA. DFA is extremely effective in reducing the between-laboratory scatter for both general yield and maximum forces. The effect is less significant for dynamic reference temperatures measured from precracked Charpy specimens using the Master Curve procedure, but a moderate reduction of the standard deviation is anyway observed. It is shown that striker calibration is a prominent contribution to the interlaboratory variability of instrumented impact forces, particularly in the case of maximum forces.

On the Effectiveness of the Dynamic Force Adjustment for Reducing the Scatter of Instrumented Charpy Results

Energy Technology Data Exchange (ETDEWEB)

Lucon, E.

2008-09-15

One of the key factors for obtaining reliable instrumented Charpy results is the calibration of the instrumented striker. An interesting alternative to the conventional static calibration recommended by the standards is the Dynamic Force Adjustment (DFA), in which forces and displacements are iteratively adjusted until equality is achieved between absorbed energies calculated under the test record (Wt) and measured by the machine encoder (KV). In this study, this procedure has been applied to the instrumented data obtained by 10 international laboratories using notched and precracked Charpy specimens, in the framework of a Coordinated Research Project (CRP8) of IAEA. DFA is extremely effective in reducing the between-laboratory scatter for both general yield and maximum forces. The effect is less significant for dynamic reference temperatures measured from precracked Charpy specimens using the Master Curve procedure, but a moderate reduction of the standard deviation is anyway observed. It is shown that striker calibration is a prominent contribution to the interlaboratory variability of instrumented impact forces, particularly in the case of maximum forces.

Toxic Hazards Research Unit Annual Technical Report: 1985

Science.gov (United States)

1985-09-01

varnish makers’ and painters’ naphtha, Toxicol. Appl. Pharmacol., 32:263-281. Carpenter, C. P.. E. R. Kinkead, D. L. Geary, L. J. Sullivan, Jr., and J...and Pharmacology of Inorganic and Fluorine Contairnin Compounds, AMRL-TR-67-224, Aerospace Medical Research Laboiatory, Wright-Patterson Air Force Base

Airplane crash

International Nuclear Information System (INIS)

Brunner, P.

1975-01-01

In May, 1974, a severe airplane crash occurred near Springfield, llinois; the crew of three and a courier were killed. The plane was carrying a large container of controlled water with a slight amount of 60 Co. A survey of the crash site by Air Force detectives and the radiological assistance team from Wright--Patterson Air Force Base indicated no radioactivity. Experiences of the incident were used to develop guidelines for future emergency preparedness

Laboratory automation: trajectory, technology, and tactics.

Science.gov (United States)

Markin, R S; Whalen, S A

2000-05-01

Laboratory automation is in its infancy, following a path parallel to the development of laboratory information systems in the late 1970s and early 1980s. Changes on the horizon in healthcare and clinical laboratory service that affect the delivery of laboratory results include the increasing age of the population in North America, the implementation of the Balanced Budget Act (1997), and the creation of disease management companies. Major technology drivers include outcomes optimization and phenotypically targeted drugs. Constant cost pressures in the clinical laboratory have forced diagnostic manufacturers into less than optimal profitability states. Laboratory automation can be a tool for the improvement of laboratory services and may decrease costs. The key to improvement of laboratory services is implementation of the correct automation technology. The design of this technology should be driven by required functionality. Automation design issues should be centered on the understanding of the laboratory and its relationship to healthcare delivery and the business and operational processes in the clinical laboratory. Automation design philosophy has evolved from a hardware-based approach to a software-based approach. Process control software to support repeat testing, reflex testing, and transportation management, and overall computer-integrated manufacturing approaches to laboratory automation implementation are rapidly expanding areas. It is clear that hardware and software are functionally interdependent and that the interface between the laboratory automation system and the laboratory information system is a key component. The cost-effectiveness of automation solutions suggested by vendors, however, has been difficult to evaluate because the number of automation installations are few and the precision with which operational data have been collected to determine payback is suboptimal. The trend in automation has moved from total laboratory automation to a

Year 2000 assessment report, Los Alamos National Laboratory

Energy Technology Data Exchange (ETDEWEB)

Weir, D.

1998-04-21

The purpose of this report is to advise managers on the status of Year 2000 readiness at the Laboratory and provide a summary of critical issues to be addressed in order to ensure that the Year 2000 date rollover will not disrupt Laboratory Operations. The Laboratory`s Year 2000 council members are in the first phase of Year 2000 plans: gathering data and assessing the status of their divisions or programs. This first snapshot of the Laboratory Year 2000 readiness assessment is expected to grow and change over time as more refined assessments, plans, and schedules are developed and as more information becomes available. Here are findings to date: (1) Embedded systems` status not known. (2) Preliminary cost estimates for Year 2000 repairs, testing, and implementation are estimated to be at least $5.9 million, not including embedded systems. (3) The Laboratory is required to make unavoidable purchases of Year 2000-compliant products. (4) The Year 2000 short-term issue forces some long-term transition plans to be set aside. (5) The Laboratory is at risk for the following consequences if they can`t demonstrate an active Year 2000 program: risk of system failures; potential funding freezes by the OMB and DOE; legal liabilities; and risk to the UC contract. (6) The deadline for this project is immutable. (7) DOE is continually increasing reporting requirements, expanding from only DOE mission-essential to all operations. (7) DOE audit criticizes the Laboratory`s mission-essential systems planning.

CHANGE@CERN:Task Force 4: Matching personnel to activities

CERN Multimedia

2002-01-01

Our series on the work of the Task Forces moves on to Human Ressources at CERN. Staff mobility and topics related to contract policy were the main personnel issues to be considered by Task Force 4, led by John Ferguson, head of AS Division. The aim, as with the other Task Forces, was to find ways to focus resources on the LHC, and once again the recommendations recognise the opportunity to make constructive changes, in this case in Human Resources policy at CERN. Movement of staff between divisions at CERN has generally not been easy, with 'staff complements' (total numbers) set for each sector (research, accelerator, technical and administration). However, the restructuring of the accelerator sector (proposed by Task Force 5 and already agreed in principle) should allow some staff to move to LHC activities. More generally, Task Force 4 recommends that the Laboratory carries out a review of all activities, at a relatively detailed level, so as to identify the resources required to achieve specific goals (t...

ONR (Office of Naval Research) Far East Scientific Bulletin. Volume 10, Number 2, April to June 1985.

Science.gov (United States)

1985-06-01

November International Astronomical Ne eh, Dr. R. Mv. West, ESO Sky Atlas Laboratory 19-28 Union 19th General Assembly India Karl - Schwarzschild ...ferrite (oxide) materials. The use of rare-earth (RE) compounds as permanent magnets resulted mainly from work done by Karl Strnat, then at Wright

A cost benefit analysis of outsourced laboratory services.

Science.gov (United States)

Bowers, J A

1995-11-01

As healthcare moves toward increased capitation, hospital administrators must be aware of all costs associated with patient services. This article describes the cost benefit analysis process used by northern Indiana hospital consumers during 1994-1995 to evaluate a local laboratory service outsource provider, South Bend Medical Foundation (SBMF). In an effort to meet the best interests of the community at large, three competing hospitals, medical leadership, and the local outsource provider joined forces to ensure that cost effective quality services would be provided. Laboratory utilization patterns for common DRGs were also analyzed. The team created a reconfiguration analysis to help develop benchmark figures for consideration in future contract negotiations.

Scalar self-interactions loosen constraints from fifth force searches

International Nuclear Information System (INIS)

Gubser, Steven S.; Khoury, Justin

2004-01-01

The mass of a scalar field mediating a fifth force is tightly constrained by experiments. We show, however, that adding a quartic self-interaction for such a scalar makes most tests much less constraining: the nonlinear equation of motion masks the coupling of the scalar to matter through the chameleon mechanism. We discuss consequences for fifth force experiments. In particular, we find that, with quartic coupling of order unity, a gravitational strength interaction with matter is allowed by current constraints. We show that our chameleon scalar field results in experimental signatures that could be detected through modest improvements of current laboratory set-ups

Sandia National Laboratories embraces ISDN

Energy Technology Data Exchange (ETDEWEB)

Tolendino, L.F.; Eldridge, J.M.

1994-08-01

Sandia National Laboratories (Sandia), a multidisciplinary research and development laboratory located on Kirtland Air Force Base, has embraced Integrated Services Digital Network technology as an integral part of its communication network. Sandia and the Department of Energy`s Albuquerque Operations Office have recently completed the installation of a modernized and expanded telephone system based, on the AT&T 5ESS telephone switch. Sandia is committed to ISDN as an integral part of data communication services, and it views ISDN as one part of a continuum of services -- services that range from ISDN`s asynchronous and limited bandwidth Ethernet (250--1000 Kbps) through full bandwidth Ethernet, FDDI, and ATM at Sonet rates. Sandia has demonstrated this commitment through its use of ISDN data features to support critical progmmmatic services such as access to corporate data base systems. In the future, ISDN will provide enhanced voice, data communication, and video services.

Effect of externally applied periodic force on ion acoustic waves in superthermal plasmas

Science.gov (United States)

Chowdhury, Snigdha; Mandi, Laxmikanta; Chatterjee, Prasanta

2018-04-01

Ion acoustic solitary waves in superthermal plasmas are investigated in the presence of trapped electrons. The reductive perturbation technique is employed to obtain a forced Korteweg-de Vries-like Schamel equation. An analytical solution is obtained in the presence of externally applied force. The effect of the external applied periodic force is also observed. The effect of the spectral index (κ), the strength ( f 0 ) , and the frequency ( ω ) on the amplitude and width of the solitary wave is obtained. The result may be useful in laboratory plasma as well as space environments.

Method to Increase the Coupling Force in a Construction Machine

Directory of Open Access Journals (Sweden)

Tsipurskij Il’ja

2017-01-01

Full Text Available This paper discusses a possible method to increase the coupling tractive force track-wheel locomotion of construction machines. Sufficient tractive coupling force allows organizing translational displacement of the machine under above-medium load modes during operation of overburden chain excavators, tower cranes and gantry cranes in outdoors environments. A mechanism is examined to convert rotary motion into rectilinear motion using the example of a gear and rail, with kinematic calculations quoted. Analysis of the “force couple” system is proposed to identify free traction forces. Factors are established that influence the machine’s working movements. Equations to calculate tractive forces in track-wheel locomotion are described. A laboratory complex is presented where students of mechanical engineering gain practical skills in mastering the production process of soil excavation and the influence of the coupling tractive force during the machine’s operation. As practical recommendation, the paper describes a device made of a balancing lever, drive cogwheel and tractive chain to implement the required tractive force of the trolley in coupling; this solution’s efficiency is demonstrated for experimental works on hard soils with high coefficient of difficulty.

An Engineer's Physics Lab -- using a Large Force Frame

Science.gov (United States)

Heid, Christy; Rampolla, Donald

2009-03-01

We have constructed very economical, easy to assemble force frames that are used by students in our general physics laboratory at Chatham University. The force frame is used at the beginning of the semester to study vector properties of forces. The force frame can be used as a horizontal or vertical force table. Angles of forces are measured using a large movable (rotation and translation) Cartesian coordinate board attached to the frame with large binder clips. The force frame is a versatile device which is used for a number of other experiments, including beam bending and torsion, mechanical resonance, projectile trajectories, torque, mechanical equilibrium, an isolated non-magnetic support for magnetic field experiments, easily adjustable support for inclined plane experiments, support for traveling wave experiments with heavy rope, and support for large scale fluid flow experiments. One advantage to a wood frame is that things can be easily stapled, nailed, screwed or glued just about anywhere on the frame, and damaged frame members can be replaced easily. As one of the few remaining women's undergraduate institutions, we have found the use of these frames to provide an additional advantage in helping women overcome their fear of simple power tools and assembly of mechanical parts as they become comfortable with these through working with the force frames throughout the semester. We intend to describe and model these applications during the session.

Proceedings of the IRI Task Force Activity 2002. 1. ed

International Nuclear Information System (INIS)

Radicella, S.M.

2003-06-01

This ICTP Internal Report contains the list of papers presented, activity reports and the write up of a number of presentations delivered during the International Reference Ionosphere (IRI) Task Force Activity 2002 which took place at the Abdus Salam ICTP during August 2002. The 2002 Task Force Activity is the ninth successful encounter of specialists organized by the URSI-Cospar IRI Working Group and the Aeronomy and Radiopropagation Laboratory of the Abdus Salam International Centre for Theoretical Physics of Trieste, Italy. The main topics of the meeting were ionosphere variability and topside ionosphere

Assessment of respiratory symptoms and lung function among textile ...

African Journals Online (AJOL)

2011-04-06

Apr 6, 2011 ... Background: The number of textile industries in Nigeria with large work force is on the rise. ... and 200 unexposed workers with similar age- and gender-matched were ... flow rate (PEFR) were determined with a flow-sensing spirometer and Wright's ..... and wheezing decreased after 5 years of employment,.

Why I Teach "Black Boy."

Science.gov (United States)

Mahle, Benjamin

1983-01-01

Argues that Richard Wright's "Black Boy" is appropriate for ninth-grade students because it combines an exciting story of survival with effective prose, forces readers to try to understand their own experiences in the light of the protagonist's, and intimately involves students in such universal concerns as suffering, violence, and…

Proclaiming Airpower: Air Force Narratives and American Public Opinion from 1917 to 2014

Science.gov (United States)

2015-01-01

1949 and 2014. In 1949, airpower was strongly associated with the Japanese surrender and with the emerging concept of strategic nuclear deter- rence...see Michael Paris, From the Wright Brothers to Top Gun: Aviation, Nationalism and Popular Cinema , Man- chester, UK: Manchester University Press...the telephone, the automobile, the cinema or radio, the airplane had little or no immediate or direct impact on the way that most people lived

The Casimir effect: a force from nothing

International Nuclear Information System (INIS)

Lambrecht, Astrid

2003-01-01

The attractive force between two surfaces in a vacuum - first predicted by Hendrik Casimir over 50 years ago - could affect everything from micro machines to unified theories of nature. What happens if you take two mirrors and arrange them so that they are facing each other in empty space? Your first reaction might be 'nothing at all'. In fact, both mirrors are mutually attracted to each other by the simple presence of the vacuum. This startling phenomenon was first predicted in 1948 by the Dutch theoretical physicist Hendrik Casimir while he was working at Philips Research Laboratories in Eindhoven on - of all things - colloidal solutions (see box). The phenomenon is now dubbed the Casimir effect, while the force between the mirrors is known as the Casimir force. For many years the Casimir effect was little more than a theoretical curiosity. But interest in the phenomenon has blossomed in recent years. Experimental physicists have realized that the Casimir force affects the workings of micro machined devices, while advances in instrumentation have enabled the force to be measured with ever-greater accuracy. The new enthusiasm has also been fired by fundamental physics. Many theorists have predicted the existence of 'large' extra dimensions in 10- and 11-dimensional unified field theories of the fundamental forces. These dimensions, they say, could modify classical Newtonian gravitation at sub-millimetre distances. Measuring the Casimir effect could therefore help physicists to test the validity of such radical ideas. (U.K.)

Government Applications Task Force ground truth study of WAG 4

International Nuclear Information System (INIS)

Evers, T.K.; Smyre, J.L.; King, A.L.

1997-06-01

This report documents the Government Applications Task Force (GATF) Buried Waste Project. The project was initiated as a field investigation and verification of the 1994 Strategic Environmental Research and Development Program's (SERDP) Buried Waste Identification Project results. The GATF project team included staff from three US Department of Energy (DOE) Laboratories [Oak Ridge National Laboratory (ORNL), Los Alamos National Laboratory (LANL), and the Savannah River Technology Center (SRTC)] and from the National Exploitation Laboratory. Similar studies were conducted at each of the three DOE laboratories to demonstrate the effective use of remote sensing technologies. The three locations were selected to assess differences in buried waste signatures under various environmental conditions (i.e., climate, terrain, precipitation, geology, etc.). After a brief background discussion of the SERDP Project, this report documents the field investigation (ground truth) results from the 1994--1995 GATF Buried Waste Study at ORNL's Waste Area Grouping (WAG) 4. Figures for this report are located in Appendix A

CHANGE@CERN:Task Force 2: reshaping for the future

CERN Multimedia

2002-01-01

Second in our series reviewing the Task Forces reports. How to lay the foundations for a more efficient organisational structure. Our present organization is based on sixteen Divisions and units under the Directorate. CERN's organization is based on a Directorate and sixteen Divisions and units, while its activities are broadly divided into four Sectors: Research, Accelerators, Technical and Administration. The mandate of Task Force 2, led by Horst Wenninger, was to identify if a structural change and a reduction of duplicated efforts could result in an increased efficiency at CERN, especially as the Laboratory continues to focus its resources on the LHC. 'This is the most difficult project ever undertaken at CERN', acknowledges Wenninger, 'a double accelerator at a temperature of 1.9 K'. For the next five years the success of the LHC must be the main priority, and CERN will have to adapt the procedures of how it works. Wenninger sees the process as an opportunity for the Laboratory to move into the 21st c...

Analysis of scrams and forced outages at boiling water reactors

International Nuclear Information System (INIS)

Earle, R.T.; Sullivan, W.P.; Miller, K.R.; Schwegman, W.J.

1980-07-01

This report documents the results of a study of scrams and forced outages at General Electric Boiling Water Reactors (BWRs) operating in the United States. This study was conducted for Sandia Laboratories under a Light Water Reactor Safety Program which it manages for the United States Department of Energy. Operating plant data were used to identify the causes of scrams and forced outages. Causes of scrams and forced outages have been summarized as a function of operating plant and plant age and also ranked according to the number of events per year, outage time per year, and outage time per event. From this ranking, identified potential improvement opportunities were evaluated to determine the associated benefits and impact on plant availability

An Analysis of the Predicted Benefits of Multi-Year Procurement

Science.gov (United States)

1982-09-01

concerned with these issues. The researchers were especially concerned with model sensitivity to parameters used in the financial sector. Model validation is...TECHNOLOGY (ATC) WRIGHT-PATTERSON AIR FORCE BASE, OH 45433 qEK•Y TO RrNov O i 5 April 1982 suata Survey of Educacion With Industry Students To LS I fully

Atomic Force Microscopy - A Tool to Unveil the Mystery of Biological ...

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 15; Issue 7. Atomic Force Microscopy - A Tool to Unveil the Mystery of Biological Systems ... Transcription and Disease Laboratory, Molecular Biology and Genetics Unit, Jawaharlal Nehru Centre for Advanced Scientific Research, Jakkur, Bangalore 560 ...

Ground Reaction Forces Generated During Rhythmical Squats as a Dynamic Loads of the Structure

Science.gov (United States)

Pantak, Marek

2017-10-01

Dynamic forces generated by moving persons can lead to excessive vibration of the long span, slender and lightweight structure such as floors, stairs, stadium stands and footbridges. These dynamic forces are generated during walking, running, jumping and rhythmical body swaying in vertical or horizontal direction etc. In the paper the mathematical models of the Ground Reaction Forces (GRFs) generated during squats have been presented. Elaborated models was compared to the GRFs measured during laboratory tests carried out by author in wide range of frequency using force platform. Moreover, the GRFs models were evaluated during dynamic numerical analyses and dynamic field tests of the exemplary structure (steel footbridge).

Observers for vehicle tyre/road forces estimation: experimental validation

Science.gov (United States)

Doumiati, M.; Victorino, A.; Lechner, D.; Baffet, G.; Charara, A.

2010-11-01

The motion of a vehicle is governed by the forces generated between the tyres and the road. Knowledge of these vehicle dynamic variables is important for vehicle control systems that aim to enhance vehicle stability and passenger safety. This study introduces a new estimation process for tyre/road forces. It presents many benefits over the existing state-of-art works, within the dynamic estimation framework. One of these major contributions consists of discussing in detail the vertical and lateral tyre forces at each tyre. The proposed method is based on the dynamic response of a vehicle instrumented with potentially integrated sensors. The estimation process is separated into two principal blocks. The role of the first block is to estimate vertical tyre forces, whereas in the second block two observers are proposed and compared for the estimation of lateral tyre/road forces. The different observers are based on a prediction/estimation Kalman filter. The performance of this concept is tested and compared with real experimental data using a laboratory car. Experimental results show that the proposed approach is a promising technique to provide accurate estimation. Thus, it can be considered as a practical low-cost solution for calculating vertical and lateral tyre/road forces.

A Development of Force Plate for Biomechanics Analysis of Standing and Walking

Science.gov (United States)

Wardoyo, S.; Hutajulu, P. T.; Togibasa, O.

2016-08-01

Force plates are known as an excellent teaching aid to demonstrate the kinematics and dynamics of motion and commonly used in biomechanics laboratories to measure ground forces involved in the motion of human. It is consist of a metal plate with sensors attached to give an electrical output proportional to the force on the plate. Moreover, force plates are useful for examining the kinetic characteristics of an athlete's movement. They provide information about the external forces involved in movement that can aid a coach or sports scientist to quantitatively evaluate the athlete's skill development. In this study, we develop our prototype of force plate with less than 100,- simply by using flexible force transducer attached inside rubber matt, in the form of square blocks (dimension: 250 mm × 150 mm × 10 mm), with maximum load up to 60 kg. The handmade force plate was tested by applying biomechanics analysis for standing and walking. The testing was done on Experimental Soccer Courses’ students at the Department of Physical Education, Health and Recreation, University of Cenderawasih. The design of the force plate system together with biomechanics analysis will be discussed.

Technology Transfer: A Qualitative Analysis of Air Force Office of Research and Technology Applications

National Research Council Canada - National Science Library

Trexler, David C

2006-01-01

Everyday within United States Air Forces? research laboratories there are hundreds of scientists and engineers whose research and development activities contribute to the advancement of science and technology for mankind...

Screening fifth forces in k-essence and DBI models

Energy Technology Data Exchange (ETDEWEB)

Brax, Philippe [Institut de Physique Théorique, CEA, IPhT, CNRS, URA2306, F-91191 Gif-sur-Yvette cédex (France); Burrage, Clare [School of Physics and Astronomy, University of Nottingham, Nottingham NG7 2RD (United Kingdom); Davis, Anne-Christine, E-mail: Philippe.Brax@cea.fr, E-mail: Clare.Burrage@nottingham.ac.uk, E-mail: A.C.Davis@damtp.cam.ac.uk [Department of Applied Mathematics and Theoretical Physics, Centre for Mathematical Sciences, Cambridge CB3 0WA (United Kingdom)

2013-01-01

New fifth forces have not yet been detected in the laboratory or in the solar system, hence it is typically difficult to introduce new light scalar fields that would mediate such forces. In recent years it has been shown that a number of non-linear scalar field theories allow for a dynamical mechanism, such as the Vainshtein and chameleon ones, that suppresses the strength of the scalar fifth force in experimental environments. This is known as screening, however it is unclear how common screening is within non-linear scalar field theories. k-essence models are commonly studied examples of non-linear models, with DBI as the best motivated example, and so we ask whether these non-linearities are able to screen a scalar fifth force. We find that a Vainshtein-like screening mechanism exists for such models although with limited applicability. For instance, we cannot find a screening mechanism for DBI models. On the other hand, we construct a large class of k-essence models which lead to the acceleration of the Universe in the recent past for which the fifth force mediated by the scalar can be screened.

Design of metrology laboratory and microfab center against vibration from shakers laboratory of the new Hong Kong University of Science and Technology

Science.gov (United States)

Hong, Westwood K. W.; Boulter, Nicholas

1992-02-01

The design of vibration-sensitive laboratories normally requires the protection of these areas from incoming vibration generated by plant, road traffic and footfall impacts. The compact nature of the new HKUST campus requires a more exact design than one would find for a spacious campus with laboratory buildings nicely separated. The HKUST user required a centralized laboratory service with easy access to the major testing facilities. This resulted in the location of vibration sensitive areas (micro-fabrication center and metrology laboratory) close to a Structural Laboratory housing large shakers. These were to be used for seismic and modal testing of structural elements and prototypes. The design of the support structure for the shakers, known as the reaction floor, was critical to the success of the building. Particular attention was paid to the design and construction of the foundations for the reaction floor. For controlling the vibration generated by 10-ton-force rated shakers, a massive structure with caisson supports was designed for the reaction floor and reaction wall. Finite element models were employed to calculate the response of the laboratory floors located above the reaction floor in other parts of the building. The metrology laboratory structure and the foundation design of the reaction floor and a wafer fab built in the U.K. will be presented.

Force Limited Random Vibration Test of TESS Camera Mass Model

Science.gov (United States)

Karlicek, Alexandra; Hwang, James Ho-Jin; Rey, Justin J.

2015-01-01

The Transiting Exoplanet Survey Satellite (TESS) is a spaceborne instrument consisting of four wide field-of-view-CCD cameras dedicated to the discovery of exoplanets around the brightest stars. As part of the environmental testing campaign, force limiting was used to simulate a realistic random vibration launch environment. While the force limit vibration test method is a standard approach used at multiple institutions including Jet Propulsion Laboratory (JPL), NASA Goddard Space Flight Center (GSFC), European Space Research and Technology Center (ESTEC), and Japan Aerospace Exploration Agency (JAXA), it is still difficult to find an actual implementation process in the literature. This paper describes the step-by-step process on how the force limit method was developed and applied on the TESS camera mass model. The process description includes the design of special fixtures to mount the test article for properly installing force transducers, development of the force spectral density using the semi-empirical method, estimation of the fuzzy factor (C2) based on the mass ratio between the supporting structure and the test article, subsequent validating of the C2 factor during the vibration test, and calculation of the C.G. accelerations using the Root Mean Square (RMS) reaction force in the spectral domain and the peak reaction force in the time domain.

Upper Limits of the Fission Cross-Sections of Lead and Bismuth for Li-D Neutrons

Energy Technology Data Exchange (ETDEWEB)

Broda, E.

1945-07-01

This report was written by E. Broda and P.K. Wright at the Cavendish Laboratory (Cambridge) in April 1945 and is about the upper limits of the fission cross sections of lead and bismuth for Li-D neutrons. This report includes the experiment description and the discussion of the results. (nowak)

Predicting muscle forces of individuals with hemiparesis following stroke

Directory of Open Access Journals (Sweden)

Maladen Ryan

2008-02-01

Full Text Available Abstract Background Functional electrical stimulation (FES has been used to improve function in individuals with hemiparesis following stroke. An ideal functional electrical stimulation (FES system needs an accurate mathematical model capable of designing subject and task-specific stimulation patterns. Such a model was previously developed in our laboratory and shown to predict the isometric forces produced by the quadriceps femoris muscles of able-bodied individuals and individuals with spinal cord injury in response to a wide range of clinically relevant stimulation frequencies and patterns. The aim of this study was to test our isometric muscle force model on the quadriceps femoris, ankle dorsiflexor, and ankle plantar-flexor muscles of individuals with post-stroke hemiparesis. Methods Subjects were seated on a force dynamometer and isometric forces were measured in response to a range of stimulation frequencies (10 to 80-Hz and 3 different patterns. Subject-specific model parameter values were obtained by fitting the measured force responses from 2 stimulation trains. The model parameters thus obtained were then used to obtain predicted forces for a range of frequencies and patterns. Predicted and measured forces were compared using intra-class correlation coefficients, r2 values, and model error relative to the physiological error (variability of measured forces. Results Results showed excellent agreement between measured and predicted force-time responses (r2 >0.80, peak forces (ICCs>0.84, and force-time integrals (ICCs>0.82 for the quadriceps, dorsiflexor, and plantar-fexor muscles. The model error was within or below the +95% confidence interval of the physiological error for >88% comparisons between measured and predicted forces. Conclusion Our results show that the model has potential to be incorporated as a feed-forward controller for predicting subject-specific stimulation patterns during FES.

77 FR 22298 - Intent To Grant an Exclusive Patent License

Science.gov (United States)

2012-04-13

... Public Law 96-517, as amended; the Department of the Air Force announces its intention to grant PS Engineering, Inc., a corporation of the State of Tennessee, having a place of business at 9800 Martel Road... Command Law Office, AFMCLO/JAZ, 2240 B Street, Rm D-14, Wright-Patterson AFB, OH 45433-7109; Facsimile...

Thin liquid sheet target capabilities for ultra-intense laser acceleration of ions at a kHz repetition rate

Science.gov (United States)

Klim, Adam; Morrison, J.; Orban, C.; Chowdhury, E.; Frische, K.; Feister, S.; Roquemore, M.

2017-10-01

The success of laser-accelerated ion experiments depends crucially on a number of factors including how thin the targets can be created. We present experimental results demonstrating extremely thin (under 200 nm) glycol sheet targets that can be used for ultra-intense laser-accelerated ion experiments conducted at the Air Force Research Laboratory at Wright-Patterson Air Force Base. Importantly, these experiments operate at a kHz repetition rate and the recovery time of the liquid targets is fast enough to allow the laser to interact with a refreshed, thin target on every shot. These thin targets can be used to produce energetic electrons, light ions, and neutrons as well as x-rays, we present results from liquid glycol targets which are useful for proton acceleration experiments via the mechanism of Target Normal Sheath Acceleration (TNSA). In future work, we will create thin sheets from deuterated water in order to perform laser-accelerated deuteron experiments. This research was sponsored by the Quantum and Non-Equilibrium Processes Division of the AFOSR, under the management of Dr. Enrique Parra, and support from the DOD HPCMP Internship Program.

Designing an experiment to measure cellular interaction forces

Science.gov (United States)

McAlinden, Niall; Glass, David G.; Millington, Owain R.; Wright, Amanda J.

2013-09-01

Optical trapping is a powerful tool in Life Science research and is becoming common place in many microscopy laboratories and facilities. The force applied by the laser beam on the trapped object can be accurately determined allowing any external forces acting on the trapped object to be deduced. We aim to design a series of experiments that use an optical trap to measure and quantify the interaction force between immune cells. In order to cause minimum perturbation to the sample we plan to directly trap T cells and remove the need to introduce exogenous beads to the sample. This poses a series of challenges and raises questions that need to be answered in order to design a set of effect end-point experiments. A typical cell is large compared to the beads normally trapped and highly non-uniform - can we reliably trap such objects and prevent them from rolling and re-orientating? In this paper we show how a spatial light modulator can produce a triple-spot trap, as opposed to a single-spot trap, giving complete control over the object's orientation and preventing it from rolling due, for example, to Brownian motion. To use an optical trap as a force transducer to measure an external force you must first have a reliably calibrated system. The optical trapping force is typically measured using either the theory of equipartition and observing the Brownian motion of the trapped object or using an escape force method, e.g. the viscous drag force method. In this paper we examine the relationship between force and displacement, as well as measuring the maximum displacement from equilibrium position before an object falls out of the trap, hence determining the conditions under which the different calibration methods should be applied.

Hydrodynamic Forces from Steep Waves in Rivers

Energy Technology Data Exchange (ETDEWEB)

Loevoll, A.

1996-12-31

The reservoir behind a hydroelectric power production dam has an enormous potential for destruction in case of a dam break. The present doctoral thesis evaluates the hydrodynamic forces from steep waves in rivers. In the laboratory, forces on a structure shaped as a vertical cylinder of rectangular cross section were measured, and the threshold condition for the bed sediment was investigated. A wave parameter {alpha} is introduced to describe the gradient of a wave front. The flow condition in the flume was reproduced by a 3-D numerical model. For various values of the wave parameter the forces were measured and compared to the drag force calculated from measured depth and velocity. From these comparisons the hydrodynamic force can be calculated as drag only, even in the case of a breaking wave front. The contribution from inertia relative to drag depends on the size of the structure. For larger structures the contributions may be important in steep waves. To study the initiation of motion (of sediments) under unsteady flow, waves of various parameter values were passed over a gravel covered bed. The initiation of motion starts before the peak of the wave, and is given by Shield`s relation if the friction slope is applied. No dependence upon the wave gradient was found. A relation was established which gives the critical shear stress if the friction slope is estimated by the bottom slope. 65 refs., 41 figs., 10 tabs.

Hydrodynamic Forces from Steep Waves in Rivers

International Nuclear Information System (INIS)

Loevoll, A.

1996-01-01

The reservoir behind a hydroelectric power production dam has an enormous potential for destruction in case of a dam break. The present doctoral thesis evaluates the hydrodynamic forces from steep waves in rivers. In the laboratory, forces on a structure shaped as a vertical cylinder of rectangular cross section were measured, and the threshold condition for the bed sediment was investigated. A wave parameter α is introduced to describe the gradient of a wave front. The flow condition in the flume was reproduced by a 3-D numerical model. For various values of the wave parameter the forces were measured and compared to the drag force calculated from measured depth and velocity. From these comparisons the hydrodynamic force can be calculated as drag only, even in the case of a breaking wave front. The contribution from inertia relative to drag depends on the size of the structure. For larger structures the contributions may be important in steep waves. To study the initiation of motion (of sediments) under unsteady flow, waves of various parameter values were passed over a gravel covered bed. The initiation of motion starts before the peak of the wave, and is given by Shield's relation if the friction slope is applied. No dependence upon the wave gradient was found. A relation was established which gives the critical shear stress if the friction slope is estimated by the bottom slope. 65 refs., 41 figs., 10 tabs

Medical Laboratory Technician--Hematology, Serology, Blood Banking, and Immunohematology (AFSC 90470).

Science.gov (United States)

Thompson, Joselyn H.

This three-volume student text is designed for use by Air Force personnel enrolled in a self-study extension course for medical laboratory technicians. Covered in the individual volumes are hematology (the physiology of blood, complete blood counts and related studies, erythrocyte studies, leukocyte and thrombocyte maturation, and blood…

Class relations and all-cause mortality: a test of Wright's social class scheme using the Barcelona 2000 Health Interview Survey.

Science.gov (United States)

Muntaner, Carles; Borrell, Carme; Solà, Judit; Marí-Dell'Olmo, Marc; Chung, Haejoo; Rodríguez-Sanz, Maica; Benach, Joan; Rocha, Kátia B; Ng, Edwin

2011-01-01

The aim of this study is to test the effects of neo-Marxian social class and potential mediators such as labor market position, work organization, material deprivation, and health behaviors on all-cause mortality. The authors use longitudinal data from the Barcelona 2000 Health Interview Survey (N=7526), with follow-up interviews through the municipal census in 2008 (95.97% response rate). Using data on relations of property, organizational power, and education, the study groups social classes according to Wright's scheme: capitalists, petit bourgeoisie, managers, supervisors, and skilled, semi-skilled, and unskilled workers. Findings indicate that social class, measured as relations of control over productive assets, is an important predictor of mortality among working-class men but not women. Workers (hazard ratio = 1.60; 95% confidence interval, 1.10-2.35) but also managers and small employers had a higher risk of death compared with capitalists. The extensive use of conventional gradient measures of social stratification has neglected sociological measures of social class conceptualized as relations of control over productive assets. This concept is capable of explaining how social inequalities are generated. To confirm the protective effect of the capitalist class position and the "contradictory class location hypothesis," additional efforts are needed to properly measure class among low-level supervisors, capitalists, managers, and small employers.

Groundwater chemistry, storage and dynamics in parts of Jigawa ...

African Journals Online (AJOL)

pc

fractures in the fresh basement are inte certain depth. Wright and Burgess weathering profile grade for the basement rocks of Kano State; they identified three water .... Flame photometer was used to analysed the. Cations in the laboratory. One litre Plastic containers were used for the collection of water samples in the field.

Wright St Univ Participation in AFRL University Engineering Design Challenge

Science.gov (United States)

2014-12-23

Methods Purpose: The purpose of this evaluation is to determine the strength of our selected epoxy when subject to shear loading in the Kevlar ...size and appropriate heat treatment. Method: Evolution one (1) tested the shear force of the epoxy on both a one square inch Kevlar patch and two...Parameters To Reflect Described Methods 3) Apply Epoxy to Kevlar Patch 4) Adhere Patch to Masonry Sample 5) Perform Prescribed Curing Method 6) Run

Programmed Control of Optical Grating Scales for Visual Research.

Science.gov (United States)

1980-12-01

A -AOO .9 AIR FORCE INST OF TECH WRIGHT-PATTERSON AFB OH SCHOO--ETC F/6 14/2 PROGRAMMED CONTROL OF OPTI CAL GRATING SCALES FOR VISUAL RESEARC --ETC(fl...custom system for AMRL. The cost in memory parts alone was $40,000, a good indication that the market is not over-priced. Ca-? western Reserve

Lessons learned during the training exercise for the entry into force of the U.S. additional protocol in the DOE complex

Energy Technology Data Exchange (ETDEWEB)

Boyer, Brian D [Los Alamos National Laboratory

2009-01-01

In 2008 in anticipation of the United States bringing into force the Additional Protocol in early 2009 DOE/NNSA planned and executed training exercises in the conduct of Additional Protocol complementary access activities. Brookhaven National Laboratory and Los Alamos National Laboratory together produced the exercises designed to prepare the following types of DOE laboratories for complementary access - weapons laboratories, nuclear engineering laboratories, and science laboratories. This panel provides a forum to discuss and summarize the results and lessons learned from the 2008 exercise.

Assessment of Effective Prestressed Force of Nuclear Containment Building using SI Technique

Energy Technology Data Exchange (ETDEWEB)

Lee, H. P.; Jang, J. B.; Hwang, K. M.; Song, Y. C. [Korea Electric Power Research Institute, Daejeon (Korea, Republic of)

2010-10-15

Bonded tendons have been used in reactor buildings of heavy water reactors and the light water reactors of some nuclear power plants operating in Korea. The assessment of prestressed forces on those bonded tendons is becoming an important issue in assuring their continuous operation beyond their design life. In order to assess the effective prestressed force on the bonded tendon, indirect assessment techniques have been applying to the test beams which were manufactured on construction time. Therefore, this research mainly forced to establish the assessment methodology to measure directly the effective prestressed force on the bonded tendon of containment buildings using System Identification (SI) technique. To accomplish this purpose, simple SI method was proposed and adapted three dimensional finite element analysis of the 1:4 scale prestressed concrete containment vessel (PCCV) tested by Sandia National Laboratory in 2000

National Standards Laboratory biennial report, 1971--1973

Energy Technology Data Exchange (ETDEWEB)

None

1974-02-28

This report describes the activities of the laboratory in: length interferometry; engineering metrology; photogrammetry; mass, volume, density, and pressure measurement: force, hardness, and materials testing machines; vibration; corrosion; time and frequency; acoustics; electrical standards; power frequency; high voltage; rf and microwave measurement; temperature measurement; optical radiometry; optics; dielectrics; magnetics; thermal and elastic properties of solids; electron transport in metals; low-energy collisions in gases; physics of the fluid state and high pressures; water vapor physics; viscometry; airglow; solar physics; and theoretical astrophysics. (DLC)

Alternative futures for the Department of Energy National Laboratories

Energy Technology Data Exchange (ETDEWEB)

1995-02-01

This Task Force was asked to propose alternate futures for the Department of Energy laboratories noted in the report. The authors` intensive ten months` study revealed multiple missions and sub-missions--traditional missions and new missions--programs and projects--each with factors of merit. They respectively suggest that the essence of what the Department, and particularly the laboratories, should and do stand for: the energy agenda. Under the overarching energy agenda--the labs serving the energy opportunities--they comment on their national security role, the all important energy role, all related environmental roles, the science and engineering underpinning for all the above, a focused economic role, and conclude with governance/organization change recommendations.

Environmental Assessment, Glide Slope/Clear Zone Obstructions, Wright-Patterson Air Force Base, Ohio

Science.gov (United States)

2013-06-01

the Integrated Cultural Resources Managemen t Plan. Historic resou rces determined to be eligible fo r listing on the National Register of Histo ric... Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington VA 22202-4302. Respondents should be aware that notwithstanding any other...and clear zones (CZs) at WPAr B in order to protect human hea lth and safety by providing adequate clearance for aircraft operations . The existing

Force decay of elastomeric chains - a mechanical design and product comparison study.

Science.gov (United States)

Balhoff, David A; Shuldberg, Matthew; Hagan, Joseph L; Ballard, Richard W; Armbruster, Paul C

2011-03-01

To evaluate the percentage force decay of elastomeric chain products utilizing three different design mechanisms simulating canine retraction; and to evaluate the percentage force decay of elastomeric chain products from four different companies. In vitro, laboratory study. LSUHSC Dental School, New Orleans, LA, USA. Closed (non-spaced), grey elastomeric chains from four companies were selected for the study. Three acrylic resin jigs were constructed to provide a framework for three simulated space closure mechanisms. The 6-5-3, the chain loop, and the 6-3 were the configuration mechanisms used in the study. An electronic force gauge was used to measure the percentage force decay associated with each elastomeric chain over 28 days at preselected times. There was a significant difference in the mean percentage force decay for the three different mechanisms (P < 0·001). For all four companies, the 6-3 mechanical design had the smallest mean percentage force decay. There was a significant difference in the mean percentage force decay for the different companies (P < 0·001). For all three mechanisms, Ormco had the smallest percentage force decay while Unitek had the highest percentage force decay. The significant difference in the mean percentage force decay for the different mechanisms suggests that the 6-3 design is a more efficient means of closing extraction spaces utilizing elastomeric chains.

Growth, Characterization and Device Development in Monocrystalline Diamond Films

Science.gov (United States)

1991-09-30

the conduction mechanisms. Research supported by SD10/1IST & managed by Wright Laboratory 1. J.A. Herb , C. Bailey, K.V. Ravi, and P.A. Dennig, "The...1982 from [951 K. L Moazed, R. Nguyen, and J. R. Zeidler, "Ohmic contacts National Taiwan University, Taiwan , ROC. to semiconducting diamond," IEEE

An Exciting Experiment for Pre-Engineering and Introductory Physics Students: Creating a DC Motor Using the Lorentz Force

Science.gov (United States)

Abdul-Razzaq, Wathiq N.; Boehm, Manfred H.; Bushey, Ryan K.

2008-01-01

Introductory physics laboratories have been demonstrated in some instances to be difficult or uninteresting to students at the collegiate level. We have developed a laboratory that introduces the concept of the Lorentz force and allows students to build a non-traditional DC motor out of easily acquired materials. Basic electricity and magnetism…

Inference of population history and patterns from molecular data

DEFF Research Database (Denmark)

Tataru, Paula

, the existing mathematical models and computational methods need to be reformulated. I address this from an inference perspective in two areas of bioinformatics. Population genetics studies the influence exerted by various factors on the dynamics of a population's genetic variation. These factors cover...... evolutionary forces, such as mutation and selection, but also changes in population size. The aim in population genetics is to untangle the history of a population from observed genetic variation. This subject is dominated by two dual models, the Wright-Fisher and coalescent. I first introduce a new...... approximation to the Wright-Fisher model, which I show to accurately infer split times between populations. This approximation can potentially be applied for inference of mutation rates and selection coefficients. I then illustrate how the coalescent process is the natural framework for detecting traces...

Corrected direct force balance method for atomic force microscopy lateral force calibration

International Nuclear Information System (INIS)

Asay, David B.; Hsiao, Erik; Kim, Seong H.

2009-01-01

This paper reports corrections and improvements of the previously reported direct force balance method (DFBM) developed for lateral calibration of atomic force microscopy. The DFBM method employs the lateral force signal obtained during a force-distance measurement on a sloped surface and relates this signal to the applied load and the slope of the surface to determine the lateral calibration factor. In the original publication [Rev. Sci. Instrum. 77, 043903 (2006)], the tip-substrate contact was assumed to be pinned at the point of contact, i.e., no slip along the slope. In control experiments, the tip was found to slide along the slope during force-distance curve measurement. This paper presents the correct force balance for lateral force calibration.

A Discrete-Event Simulation Model for Evaluating Air Force Reusable Military Launch Vehicle Post-Landing Operations

National Research Council Canada - National Science Library

Martindale, Michael

2006-01-01

The purpose of this research was to develop a discrete-event computer simulation model of the post-landing vehicle recoveoperations to allow the Air Force Research Laboratory, Air Vehicles Directorate...

Life sciences: Lawrence Berkeley Laboratory, 1988

International Nuclear Information System (INIS)

1989-07-01

Life Sciences Research at LBL has both a long history and a new visibility. The physics technologies pioneered in the days of Ernest O. Lawrence found almost immediate application in the medical research conducted by Ernest's brother, John Lawrence. And the tradition of nuclear medicine continues today, largely uninterrupted for more than 50 years. Until recently, though, life sciences research has been a secondary force at the Lawrence Berkeley Laboratory (LBL). Today, a true multi-program laboratory has emerged, in which the life sciences participate as a full partner. The LBL Human Genome Center is a contribution to the growing international effort to map the human genome. Its achievements represent LBL divisions, including Engineering, Materials and Chemical Sciences, and Information and Computing Sciences, along with Cell and Molecular Biology and Chemical Biodynamics. The Advanced Light Source Life Sciences Center will comprise not only beamlines and experimental end stations, but also supporting laboratories and office space for scientists from across the US. This effort reflects a confluence of scientific disciplines --- this time represented by individuals from the life sciences divisions and by engineers and physicists associated with the Advanced Light Source project. And finally, this report itself, the first summarizing the efforts of all four life sciences divisions, suggests a new spirit of cooperation. 30 figs

FAMILIARISATION AND RELIABILITY OF SPRINT TEST INDICES DURING LABORATORY AND FIELD ASSESSMENT

Directory of Open Access Journals (Sweden)

Andrew Galbraith

2009-12-01

Full Text Available The aim of the study was to assess the reliability of sprint performance in both field and laboratory conditions. Twenty-one male (mean ± s: 19 ± 1 years, 1.79 ± 0.07 m, 77.6 ± 7.1 kg and seventeen female team sport players (mean ± s: 21 ± 4 years, 1.68 ± 0. 07 m, 62.7 ± 4.7 kg performed a maximal 20-metre sprint running test on eight separate occasions. Four trials were conducted on a non-motorised treadmill in the laboratory; the other four were conducted outdoors on a hard-court training surface with time recorded by single-beam photocells. Trials were conducted in random order with no familiarisation prior to testing. There was a significant difference between times recorded during outdoor field trials (OFT and indoor laboratory trials (ILT using a non-motorised treadmill (3.47 ± 0.53 vs. 6.06 ±1.17s; p < 0.001. The coefficient of variation (CV for time was 2.55-4.22% for OFT and 5.1-7.2% for ILT. During ILT peak force (420.9 ± 87.7N, mean force (147.2 ± 24.7N, peak power (1376.8 ± 451.9W and mean power (514.8 ± 164.4W, and were measured. The CV for all ILT variables was highest during trial 1-2 comparison. The CV (95% confidence interval for the trial 3-4 comparison yielded: 9.4% (7.7-12. 1%, 7.9% (6.4-10.2%, 10.1% (8.2-13.1% and 6.2% (5.1-8.0% for PF, MF, PP and MP and respectively. The results indicate that reliable data can be derived for single maximal sprint measures, using fixed distance protocols. However, significant differences in time/speed over 20-m exist between field and laboratory conditions. This is primarily due to the frictional resistance in the non- motorised treadmill. Measures of force and power during ILT require at least 3 familiarisations to reduce variability in test scores

Measuring of beat up force on weaving machines

Directory of Open Access Journals (Sweden)

Bílek Martin

2017-01-01

Full Text Available The textile material (warp is stressed cyclically at a relative high frequency during the weaving process. Therefore, the special measuring device for analysis of beat up force in the textile material during the weaving process, has been devised in the Weaving Laboratory of the TUL. This paper includes a description of this measuring device. The experimental part includes measurements results for various materials (PES and VS and various warp thread densities of the produced fabric.

Voluntary and forced exercise influence the survival and body composition of ageing male rats differently.

Science.gov (United States)

Narath, E; Skalicky, M; Viidik, A

2001-11-01

The importance of maintaining physical fitness by engaging in exercise in a life-long perspective as well as the avoidance of obesity has been emphasised in recent years by epidemiological studies on human populations as well as studies on laboratory rodents. In laboratory studies, voluntary running in wheels and forced training in a treadmill have been used with beneficial results. Restriction of the food intake of sedentary laboratory rodents can be regarded either as life prolongation or prevention of life shortening by obesity. We compared the effects of these interventions on male Sprague-Dawley rats from the age of 5 to 23 months in the following groups: (1) RW=voluntary running in wheels; (2) PW=fed to pair weight with RW animals; (3) TM=forced training in a treadmill; and (4) S1=sedentary with ad libitum access to food. Each group consisted of 32 animals, all housed individually in cages. Two RW animals died, five died in each of the PW and S1 groups and 10 in the TM group (pmuch they run.

Small-scale electric generators for arctic applications

International Nuclear Information System (INIS)

Lamp, T.R.

1995-01-01

Forest fires that have endangered remote US Air Force sites equipped with radioisotope thermoelectric generators (RTGs) has prompted the assessment of power generating systems as substitutes for RTGs in small scale (10--120 watt) applications. A team of scientists and engineers of the US Air Forces' Wright Laboratory conductd an assessment of electrical power technologies for use by the Air Force in remote, harsh environments. The surprisingly high logistics costs of operating fossil fuel generators resulted in the extension of the assessment to non-RTG sites. The candidate power sources must operate unattended for long periods at a high level of operational reliability. Selection of the optimum power generation technology is complicated and heavily driven by the severe operating environment and compounded by the remoteness of the location. It is these site-related characteristics, more than any other, that drive the selection of a safe and economical power source for Arctic applications. A number of proven power generation technologies were evaluated. The assessment concluded that RGTs are clearly the safest, most reliable, and most economical approach to supplying electrical power for remote, difficult to assess locations. The assessment also indicated that the logistics costs associated with combustion driven generator systems could be substantially reduced through the use of conversion technologies which have been previously developed for space power applications. copyright 1995 American Institute of Physics

Epidemiologic surveillance. Annual report for Idaho National Engineering Laboratory 1994

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-12-31

Epidemiologic surveillance at DOE facilities consists of regular and systematic collection, analysis, and interpretation of data on absences due to illness and injury in the work force. Its purpose is to provide an early warning system for health problems occurring among employees at participating sites. In this annual report, the 1994 morbidity data for the Idaho National Engineering Laboratory are summarized. These analyses focus on absences of 5 or more consecutive workdays occurring among workers aged 17-85 years. They are arranged in five sets of tables that present: (1) the distribution of the labor force by occupational category and pay status; (2) the absences per person, diagnoses per absence, and diagnosis rates for the whole work force; (3) diagnosis rates by type of disease or injury; (4) diagnosis rates by occupational category; and (5) relative risks for specific types of disease or injury by occupational category.

Method to Increase Undergraduate Laboratory Student Confidence in Performing Independent Research

Directory of Open Access Journals (Sweden)

Colton E. Kempton

2017-05-01

Full Text Available The goal of an undergraduate laboratory course should be not only to introduce the students to biology methodologies and techniques, but also to teach them independent analytical thinking skills and proper experiment design.  This is especially true for advanced biology laboratory courses that undergraduate students typically take as a junior or senior in college.  Many courses achieve the goal of teaching techniques, but fail to approach the larger goal of teaching critical thinking, experimental design, and student independence.  Here we describe a study examining the application of the scaffolding instructional philosophy in which students are taught molecular techniques with decreasing guidance to force the development of analytical thinking skills and prepare undergraduate students for independent laboratory research. This method was applied to our advanced molecular biology laboratory class and resulted in an increase of confidence among the undergraduate students in their abilities to perform independent research.

Extraction of protoactinium from silicaceous raw material

Energy Technology Data Exchange (ETDEWEB)

Broda, E.

1946-07-01

This report was written by E. Broda and P.K. Wright at the Cavendish Laboratory (Cambridge) in March 1946 and is about the Extraction of protoactinium from a silicaceous raw material. In this report the isolation of Pa on Er carrier is described and it includes the experiment description and the discussion of the results. (nowak)

Assessment of Structural Resistance of building 4862 to Earthquake and Tornado Forces [SEC 1 and 2

International Nuclear Information System (INIS)

METCALF, I.L.

1999-01-01

This report presents the results of work done for Hanford Engineering Laboratory under contract Y213-544-12662. LATA performed an assessment of building 4862 resistance to earthquake and tornado forces

Assessment of Structural Resistance of building 4862 to Earthquake and Tornado Forces [SEC 1 and 2

Energy Technology Data Exchange (ETDEWEB)

METCALF, I.L.

1999-12-06

This report presents the results of work done for Hanford Engineering Laboratory under contract Y213-544-12662. LATA performed an assessment of building 4862 resistance to earthquake and tornado forces.

Metrological approach to the force exerted by the axle of a road vehicle in motion carrying liquid

International Nuclear Information System (INIS)

Faruolo, Luciano Bruno; Pinto, Fernando Augusto de Noronha Castro

2016-01-01

Weigh-in-motion (WIM) systems are used for identifying the dynamic force exerted on the ground by axles of a vehicle. These systems are important for monitoring the gross vehicle weight and the vehicle axle load. Overweighted trucks on the roads increase pavement damage and traffic accidents. Knowing the accuracy of WIM systems is necessary. In the case of liquid transport the ‘sloshing effect’ affects this accuracy. This paper aims to analyze the dynamic measurement of the axle forces in vehicles carrying liquid during WIM up to 6 km h −1 . Laboratory experiments using one vehicle with six axles and liquid loads on different levels in weighing instruments are presented. A non-linear computational multi-mass-springs model was developed and laboratory experiments were carried out to show the acceleration influences on axle forces of vehicles with six axles and with and without baffles to vary the ‘sloshing effect’. (paper)

Membrane actuation by Casimir force manipulation

International Nuclear Information System (INIS)

Pinto, Fabrizio

2008-01-01

In our laboratory, we have been developing a practical demonstration of actuation by means of the Casimir force inspired by the capacitive detection approach originally described by Arnold, Hunklinger and Dransfeld (1972 Rev. Sci. Instrum. 43 584-7). In this paper, we first describe the mathematical challenges pertaining to the electrostatic calibration of our measuring device, which has been enhanced by our recently published results regarding the computation of electrostatic fields in axial systems, such as the long-standing classical circular capacitor problem. We also discuss our computational approach to the calculation of the Casimir force in our system, including our adoption of analytical descriptions of the dielectric functions of semiconductors extended to the case of axial geometries. We will illustrate how the original AHD apparatus has been drastically improved upon, for instance by means of modern nanopositioner technology, and we shall discuss our published experimental results on the dynamics of a vibrating membrane with a central disc, which have provided the first direct verification of the mechanical resonances of such a system. The emphasis of our effort is not exclusively directed to fundamental physics research but is focused on, and ultimately motivated by, our goal of identifying viable industrial applications leading to commercially marketable products based on Casimir force actuation. Therefore we conclude this paper by briefly discussing the contribution we believe these results will offer to some current technological problems, in particular in nanotechnology, including some thoughts on the possibility that dispersion forces may enable a new and rapidly expanding industry to develop in the near future

Los Alamos National Laboratory Human and Intellectual Capital for Sustaining Nuclear Deterrence

Energy Technology Data Exchange (ETDEWEB)

McAlpine, Bradley [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2015-04-01

This paper provides an overview of the current human and intellectual capital at Los Alamos National Laboratory, through specific research into the statistics and demographics as well as numerous personal interviews at all levels of personnel. Based on this information, a series of recommendations are provided to assist Los Alamos National Laboratory in ensuring the future of the human and intellectual capital for the nuclear deterrence mission. While the current human and intellectual capital is strong it stands on the precipice and action must be taken to ensure Los Alamos National Laboratory maintains leadership in developing and sustaining national nuclear capabilities. These recommendations may be applicable to other areas of the nuclear enterprise, including the Air Force, after further research and study.

Los Alamos National Laboratory Human and Intellectual Capital for Sustaining Nuclear Deterrence

International Nuclear Information System (INIS)

McAlpine, Bradley

2015-01-01

This paper provides an overview of the current human and intellectual capital at Los Alamos National Laboratory, through specific research into the statistics and demographics as well as numerous personal interviews at all levels of personnel. Based on this information, a series of recommendations are provided to assist Los Alamos National Laboratory in ensuring the future of the human and intellectual capital for the nuclear deterrence mission. While the current human and intellectual capital is strong it stands on the precipice and action must be taken to ensure Los Alamos National Laboratory maintains leadership in developing and sustaining national nuclear capabilities. These recommendations may be applicable to other areas of the nuclear enterprise, including the Air Force, after further research and study.

The geochemistry of Don Juan Pond: Evidence for a deep groundwater flow system in Wright Valley, Antarctica

Science.gov (United States)

Toner, J. D.; Catling, D. C.; Sletten, R. S.

2017-09-01

Don Juan Pond (DJP), Antarctica, is one of the most unusual surface waters on Earth because of its CaCl2-rich composition. To investigate the evolution of pond waters during closed-basin evaporation and to understand the source of brines responsible for the chemistry of DJP, we apply a newly developed low-temperature aqueous model in the Na-K-Ca-Mg-Cl system to DJP. By modeling the closed-basin evaporation of DJP and comparing ionic ratios between DJP surface water, deep groundwater, shallow groundwater, and other surface chemistries in Wright Valley, we find that DJP is best explained by upwelling deep groundwater, as opposed to recent hypotheses proposing shallow groundwater sources. The early closed-basin evolution of brines in our model accurately predicts observed chemistries in DJP; however, late-stage closed-basin evaporation produces Mg-K-rich brines and salts that do not match the CaCl2-rich brine in DJP. Based on groundwater inflow rates to DJP, we estimate that even the most concentrated brines in DJP have undergone closed-basin evaporation for less than a year. To explain the observed lack of Mg2+ and K+ accumulation in DJP over time, and the surprisingly young age for the brines, we deduce that DJP is a localized upwelling from a regional groundwater flow-through system in which evaporated DJP brines are recycled back into the subsurface over yearly timescales. The existence of a regional groundwater flow system beneath DJP has implications for water and solute budgets in cold desert ecosystems, and may provide clues for the formation of groundwater and aqueous flows on Mars.

Application Development for Optimizing Patient Placement on Aeromedical Evacuation Flights: Proof-of-Concept

Science.gov (United States)

2018-01-12

PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Brittany Fouts, Jennifer Serres, Ray Hill, Frank Ciarallo 5d. PROJECT NUMBER 5e. TASK NUMBER 5f...APPENDIX A – Flowchart for Graphical Prototype ...................................................................... 9 APPENDIX B – Proof-of-Concept App...would like to thank the programming team at the Department of Operational Analysis at the Air Force Institute of Technology at Wright-Patterson Air

USAF Summer Research Program - 1995 High School Apprenticeship Program Final Reports, Volume 14, Rome Laboratory

National Research Council Canada - National Science Library

Moore, Gary

1995-01-01

The United States Air Force High School Apprenticeship Program's (USAF HSAP) purpose is to place outstanding high school students whose interests are in the areas of mathematics, engineering, and science to work in a laboratory environment...

A Comparative Study of Melanin Content and Skin Morphology for Three Commonly Used Laboratory Swine (Sus scrofa domestica)

Science.gov (United States)

2012-09-01

Air Force Research Laboratory 711th Human Performance Wing Human Effectiveness Directorate Bioeffects Division Optical Radiation Bioeffects...Branch AFRL-RH-FS-TR-2013-0004 A Comparative Study of Melanin Content and Skin Morphology for Three Commonly Used Laboratory Swine (Sus scrofa...Jindra Human Effectiveness Directorate Directed Energy Bioeffects Division Optical Radiation Branch Robert W. Kornegay Rick Figueroa Human

Measurement of Vehicle-Bridge-Interaction force using dynamic tire pressure monitoring

Science.gov (United States)

Chen, Zhao; Xie, Zhipeng; Zhang, Jian

2018-05-01

The Vehicle-Bridge-Interaction (VBI) force, i.e., the normal contact force of a tire, is a key component in the VBI mechanism. The VBI force measurement can facilitate experimental studies of the VBI as well as input-output bridge structural identification. This paper introduces an innovative method for calculating the interaction force by using dynamic tire pressure monitoring. The core idea of the proposed method combines the ideal gas law and a basic force model to build a relationship between the tire pressure and the VBI force. Then, unknown model parameters are identified by the Extended Kalman Filter using calibration data. A signal filter based on the wavelet analysis is applied to preprocess the effect that the tire rotation has on the pressure data. Two laboratory tests were conducted to check the proposed method's validity. The effects of different road irregularities, loads and forward velocities were studied. Under the current experiment setting, the proposed method was robust to different road irregularities, and the increase in load and velocity benefited the performance of the proposed method. A high-speed test further supported the use of this method in rapid bridge tests. Limitations of the derived theories and experiment were also discussed.

[Why medical consultation is needed in the clinical laboratory].

Science.gov (United States)

Kawai, T

1998-10-01

During the 20th century, at least until the 1980s, clinical laboratory practice had been rapidly expanded, mainly because of a significant advancement in medicine as a whole and also in laboratory technology. However, recent economic changes in health care environment worldwide have been influencing greatly future trends in clinical laboratory practice. Four major macroeconomic forces drive change in clinical laboratory practice as follows; (1) Increasing cost of health care, (2) Implications of an aging population, (3) Social change in the patient population, and (4) Explosion of new technologies. Obviously, the increasing cost of health care is the primary driver. Considering a rapid change in the health care environment, clearly there are two separate pathways to be considered with regard to future modes of delivering patient care services through the clinical laboratory: commercial independent laboratories and hospital laboratories. In most hospital laboratories, in addition to high-quality, accurate and precise laboratory data being delivered through automated informatics in a timely fashion, laboratory physicians and other laboratorians should be available 24 hours a day and 7 days a week. The primary purpose of this approach is to develop a system in which the physician can order the most efficient number of tests, which will provide the maximum amount of clinically relevant informations most rapidly and most accurately at the least cost to the patient. Laboratory physicians must play a key role particularly in hospital laboratories. Their most important roles include those of a professional supplier of laboratory results being useful for health care and clinically relevant, and that of a consultative role for primary care physicians and other co-medical staffs to make important medical decision, based on laboratory results obtained. Therefore, the Japan Society of Clinical Pathology started in 1990 in publishing a series of proposed guidelines for adequate

Aespoe Hard Rock Laboratory. Annual Report 2008

International Nuclear Information System (INIS)

2009-07-01

Materials is to study clay materials that in laboratory tests have shown to be conceivable buffer materials. Three test parcels with different combinations of clay materials are installed in boreholes at Aespoe HRL; The Backfill and Plug Test is a test of the hydraulic and mechanical function of different backfill materials, emplacement methods and a full-scale plug; The aim of the Canister Retrieval Test was to demonstrate readiness for recovering emplaced canisters even after the time when the surrounding bentonite buffer is fully saturated; The Temperature Buffer Test aims at improving our current understanding of the thermo-hydromechanical behaviour of buffers with a temperature around and above 100 deg C during the water saturation transient. The main goal of the project Sealing of Tunnel at Great Depth is to confirm that silica sol is a useful grout at the water pressures prevailing at repository level. To achieve this, the Tass-tunnel has been constructed at the -450 m level at Aespoe HRL. The objective of the project In situ Corrosion Testing of Miniature Canisters is to obtain a better understanding of the corrosion processes inside a failed canister. In Aespoe HRL in situ experiments are performed with miniature copper canisters with cast iron inserts. The Task Force on Engineered Barrier Systems addresses, in the first phase, two tasks: (1) THM processes and (2) gas migration in buffer material. However, at the end of 2006 it was decided to start a parallel Task Force that deals with geochemical processes in engineered barriers. During 2008, two Task Force meetings have been held. In Benchmark 1 (laboratory tests) the modelling of THM processes and gas breakthrough is finalised. In Benchmark 2 (large scale field tests) the main work has been within modelling of the Canister retrieval test at Aespoe HRL and the finalising of the modelling of the URL tests. Laboratory experiments and results from the experiment Long term test of buffer materials have been used as

Aespoe Hard Rock Laboratory. Annual Report 2008

Energy Technology Data Exchange (ETDEWEB)

2009-07-15

Buffer Materials is to study clay materials that in laboratory tests have shown to be conceivable buffer materials. Three test parcels with different combinations of clay materials are installed in boreholes at Aespoe HRL; The Backfill and Plug Test is a test of the hydraulic and mechanical function of different backfill materials, emplacement methods and a full-scale plug; The aim of the Canister Retrieval Test was to demonstrate readiness for recovering emplaced canisters even after the time when the surrounding bentonite buffer is fully saturated; The Temperature Buffer Test aims at improving our current understanding of the thermo-hydromechanical behaviour of buffers with a temperature around and above 100 deg C during the water saturation transient. The main goal of the project Sealing of Tunnel at Great Depth is to confirm that silica sol is a useful grout at the water pressures prevailing at repository level. To achieve this, the Tass-tunnel has been constructed at the -450 m level at Aespoe HRL. The objective of the project In situ Corrosion Testing of Miniature Canisters is to obtain a better understanding of the corrosion processes inside a failed canister. In Aespoe HRL in situ experiments are performed with miniature copper canisters with cast iron inserts. The Task Force on Engineered Barrier Systems addresses, in the first phase, two tasks: (1) THM processes and (2) gas migration in buffer material. However, at the end of 2006 it was decided to start a parallel Task Force that deals with geochemical processes in engineered barriers. During 2008, two Task Force meetings have been held. In Benchmark 1 (laboratory tests) the modelling of THM processes and gas breakthrough is finalised. In Benchmark 2 (large scale field tests) the main work has been within modelling of the Canister retrieval test at Aespoe HRL and the finalising of the modelling of the URL tests. Laboratory experiments and results from the experiment Long term test of buffer materials have been

IAEA laboratory activities. The IAEA laboratories at Vienna and Seibersdorf, the International Laboratory of Marine Radioactivity at Monaco, the International Centre for Theoretical Physics at Trieste, the Middle Eastern Regional Radioisotope Centre for the Arab Countries, Cairo. 1st report

International Nuclear Information System (INIS)

1964-01-01

Since 1958 the General Conferences of the International Atomic Energy Agency have discussed the establishment of scientific centres which would help the Agency to carry out its statutory functions. Subsequently, decisions were taken which have led to the foundation of two laboratories and the establishment under the Agency's auspices of an isotope centre. The plans for the setting up of the Agency's Laboratory Vienna - Seibersdorf were approved by the Board of Governors of the International Atomic Energy Agency in April 1 959, and the agreement on the Marine Biological Project at Monaco came into force in March 1961. In March 1963 the Middle Eastern Regional Radioisotope Centre for the Arab countries was opened. The first comprehensive report on the activities of the laboratories and the isotope centre is now published; it contains information on the development of the centres and their activities carried out in 1963. The Agency expresses its gratitude to the Governments of Austria, Monaco and the United Arab Republic for the generous assistance offered in connection with the establishment of the laboratories and the isotope centre

Environmental Audit at Santa Barbara Operations, Special Technologies Laboratory, Remote Sensing Laboratory, North Las Vegas Facilities

International Nuclear Information System (INIS)

1991-03-01

This report documents the results of the Environmental Audit of selected facilities under the jurisdiction of the DOE Nevada Operations Office (NV) that are operated by EG and G Energy Measurements, Incorporated (EG and G/EM). The facilities included in this Audit are those of Santa Barbara Operation (SBO) at Goleta, California; the Special Technologies Laboratory (STL) at Santa Barbara, California; and Las Vegas Area Operations (LVAO) including the Remote Sensing Laboratory (RSL) at Nellis Air Force Base in Nevada, and the North Las Vegas Facilities (NLVF) at North Las Vegas, Nevada. The Environmental Audit was conducted by the US Department of Energy's (DOE) Office of Environmental Audit, commencing on January 28, 1991 and ending on February 15, 1991. The scope of the Audit was comprehensive, addressing environmental activities in the technical areas of air, surface water/drinking water, groundwater, waste management, toxic and chemical materials, quality assurance, radiation, inactive waste sites, and environmental management. Also assessed was compliance with applicable Federal, state, and local regulations and requirements; internal operating requirements; DOE Orders; and best management practices. 8 tabs

Investigation of Calibrating Force Transducer Using Sinusoidal Force

International Nuclear Information System (INIS)

Zhang Li; Wang Yu; Zhang Lizhe

2010-01-01

Sinusoidal force calibration method was studied several years before at Physikalisch-Technische Bundesanstalt (PTB). A similar dynamic force calibration system is developed at Changcheng Institute of Metrology and Measurement (CIMM). It uses electro-dynamic shakers to generate dynamic force in the range from 1 N to 20 kN, and heterodyne laser interferometers are used for acceleration measurement. The force transducer to be calibrated is mounted on the shaker, and a mass block is screwed on the top of force transducer, the sinusoidal forces realized by accelerated load masses are traceable to acceleration and mass according to the force definition. The methods of determining Spatial-dependent acceleration on mass block and measuring the end mass of force transducer in dynamic force calibration are discussed in this paper.

Estimation of ground reaction forces and moments during gait using only inertial motion capture

NARCIS (Netherlands)

Karatsidis, Angelos; Bellusci, Giovanni; Schepers, H. Martin; de Zee, Mark; Andersen, Michael S.; Veltink, Petrus H.

Ground reaction forces and moments (GRF&M) are important measures used as input in biomechanical analysis to estimate joint kinetics, which often are used to infer information for many musculoskeletal diseases. Their assessment is conventionally achieved using laboratory-based equipment that cannot

Quantitative Analyses of Force-Induced Amyloid Formation in Candida albicans Als5p: Activation by Standard Laboratory Procedures.

Directory of Open Access Journals (Sweden)

Cho X J Chan

Full Text Available Candida albicans adhesins have amyloid-forming sequences. In Als5p, these amyloid sequences cluster cell surface adhesins to create high avidity surface adhesion nanodomains. Such nanodomains form after force is applied to the cell surface by atomic force microscopy or laminar flow. Here we report centrifuging and resuspending S. cerevisiae cells expressing Als5p led to 1.7-fold increase in initial rate of adhesion to ligand coated beads. Furthermore, mechanical stress from vortex-mixing of Als5p cells or C. albicans cells also induced additional formation of amyloid nanodomains and consequent activation of adhesion. Vortex-mixing for 60 seconds increased the initial rate of adhesion 1.6-fold. The effects of vortex-mixing were replicated in heat-killed cells as well. Activation was accompanied by increases in thioflavin T cell surface fluorescence measured by flow cytometry or by confocal microscopy. There was no adhesion activation in cells expressing amyloid-impaired Als5pV326N or in cells incubated with inhibitory concentrations of anti-amyloid dyes. Together these results demonstrated the activation of cell surface amyloid nanodomains in yeast expressing Als adhesins, and further delineate the forces that can activate adhesion in vivo. Consequently there is quantitative support for the hypothesis that amyloid forming adhesins act as both force sensors and effectors.

Information driving force and its application in agent-based modeling

Science.gov (United States)

Chen, Ting-Ting; Zheng, Bo; Li, Yan; Jiang, Xiong-Fei

2018-04-01

Exploring the scientific impact of online big-data has attracted much attention of researchers from different fields in recent years. Complex financial systems are typical open systems profoundly influenced by the external information. Based on the large-scale data in the public media and stock markets, we first define an information driving force, and analyze how it affects the complex financial system. The information driving force is observed to be asymmetric in the bull and bear market states. As an application, we then propose an agent-based model driven by the information driving force. Especially, all the key parameters are determined from the empirical analysis rather than from statistical fitting of the simulation results. With our model, both the stationary properties and non-stationary dynamic behaviors are simulated. Considering the mean-field effect of the external information, we also propose a few-body model to simulate the financial market in the laboratory.

Supplemental site inspection for Air Force Plant 59, Johnson City, New York, Volume 1: Investigation report

Energy Technology Data Exchange (ETDEWEB)

Nashold, B.; Rosenblatt, D.; Hau, J. [and others

1995-08-01

This summary describes a Supplemental Site Inspection (SSI) conducted by Argonne National Laboratory (ANL) at Air Force Plant 59 (AFP 59) in Johnson City, New York. All required data pertaining to this project were entered by ANL into the Air Force-wide Installation Restoration Program Information System (IRPIMS) computer format and submitted to an appropriate authority. The work was sponsored by the United States Air Force as part of its Installation Restoration Program (IRP). Previous studies had revealed the presence of contaminants at the site and identified several potential contaminant sources. Argonne`s study was conducted to answer questions raised by earlier investigations.

Oak Ridge National Laboratory Institutional Plan, FY 1991--FY 1996

Energy Technology Data Exchange (ETDEWEB)

1991-02-01

The Oak Ridge National Laboratory -- one of DOE's major multiprogram laboratories -- focuses its resources on energy research and development (R D). To be able to meet these R D challenges, the Laboratory must achieve excellence in its operations relative to environmental, safety, and health (ES H) protection and to restore its aging facility infrastructure. ORNL's missions are carried out in compliance with all applicable ES H regulations. The Laboratory conducts applied R D in energy technologies -- in conservation; fission; magnetic fusion; health and environmental protection; waste management; renewable resources; and fossil energy. Experimental and theoretical research is undertaken to investigate fundamental problems in physical, chemical, materials, computational, biomedical, earth, and environmental sciences; to advance scientific knowledge; and to support energy technology R D. ORNL designs, builds, and operates unique research facilities for the benefit of university, industrial, and national laboratory researchers. The Laboratory serves as a catalyst in bringing national and international research elements together for important scientific and technical collaborations. ORNL helps to prepare the scientific and technical work force of the future by offering innovative and varied learning and R D experiences at the Laboratory for students and faculty from preschool level through postdoctoral candidates. The transfer of science and technology to US industries and universities is an integral component of ORNL's R D missions. ORNL also undertakes research and development for non-DOE sponsors when such work is synergistic with DOE mission. 66 figs., 55 tabs.

Oak Ridge National Laboratory Institutional Plan, FY 1991--FY 1996

International Nuclear Information System (INIS)

1991-02-01

The Oak Ridge National Laboratory -- one of DOE's major multiprogram laboratories -- focuses its resources on energy research and development (R ampersand D). To be able to meet these R ampersand D challenges, the Laboratory must achieve excellence in its operations relative to environmental, safety, and health (ES ampersand H) protection and to restore its aging facility infrastructure. ORNL's missions are carried out in compliance with all applicable ES ampersand H regulations. The Laboratory conducts applied R ampersand D in energy technologies -- in conservation; fission; magnetic fusion; health and environmental protection; waste management; renewable resources; and fossil energy. Experimental and theoretical research is undertaken to investigate fundamental problems in physical, chemical, materials, computational, biomedical, earth, and environmental sciences; to advance scientific knowledge; and to support energy technology R ampersand D. ORNL designs, builds, and operates unique research facilities for the benefit of university, industrial, and national laboratory researchers. The Laboratory serves as a catalyst in bringing national and international research elements together for important scientific and technical collaborations. ORNL helps to prepare the scientific and technical work force of the future by offering innovative and varied learning and R ampersand D experiences at the Laboratory for students and faculty from preschool level through postdoctoral candidates. The transfer of science and technology to US industries and universities is an integral component of ORNL's R ampersand D missions. ORNL also undertakes research and development for non-DOE sponsors when such work is synergistic with DOE mission. 66 figs., 55 tabs

KWISP: an ultra-sensitive force sensor for the Dark Energy sector

CERN Document Server

Karuza, M; Gardikiotis, A; Hoffmann, D H H; Semertzidis, Y K; Zioutas, K

2016-01-01

An ultra-sensitive opto-mechanical force sensor has been built and tested in the optics laboratory at INFN Trieste. Its application to experiments in the Dark Energy sector, such as those for Chameleon-type WISPs, is particularly attractive, as it enables a search for their direct coupling to matter. We present here the main characteristics and the absolute force calibration of the KWISP (Kinetic WISP detection) sensor. It is based on a thin Si3N4 micro-membrane placed inside a Fabry-Perot optical cavity. By monitoring the cavity characteristic frequencies it is possible to detect the tiny membrane displacements caused by an applied force. Far from the mechanical resonant frequency of the membrane, the measured force sensitivity is 5.0e-14 N/sqrt(Hz), corresponding to a displacement sensitivity of 2.5e-15 m/sqrt(Hz), while near resonance the sensitivity is 1.5e-14 N/sqrt(Hz), reaching the estimated thermal limit, or, in terms of displacement, 7.5e-16 N/sqrt(Hz). These displacement sensitivities are comparable...

Interference of Locally Forced Internal Waves in Non-Uniform Stratifications

Science.gov (United States)

Supekar, Rohit; Peacock, Thomas

2017-11-01

Several studies have investigated the effect of constructive or destructive interference on the transmission of internal waves propagating through non-uniform stratifications. Such studies have been performed for internal waves that are spatiotemporally harmonic. To understand the effect of localization, we perform a theoretical and experimental study of the transmission of two-dimensional internal waves that are generated by a spatiotemporally localized boundary forcing. This is done by considering an idealized problem and applying a weakly viscous semi-analytic linear model. Parametric studies using this model show that localization leads to the disappearance of transmission peaks and troughs that would otherwise be present for a harmonic forcing. Laboratory experiments that we perform provide a clear indication of this physical effect. Based on the group velocity and angle of propagation of the internal waves, a practical criteria that assesses when the transmission peaks or troughs are evident, is obtained. It is found that there is a significant difference in the predicted energy transfer due to a harmonic and non-harmonic forcing which has direct implications to various physical forcings such as a storm over the ocean.

A Research Module for the Organic Chemistry Laboratory: Multistep Synthesis of a Fluorous Dye Molecule.

Science.gov (United States)

Slade, Michael C; Raker, Jeffrey R; Kobilka, Brandon; Pohl, Nicola L B

2014-01-14

A multi-session research-like module has been developed for use in the undergraduate organic teaching laboratory curriculum. Students are tasked with planning and executing the synthesis of a novel fluorous dye molecule and using it to explore a fluorous affinity chromatography separation technique, which is the first implementation of this technique in a teaching laboratory. Key elements of the project include gradually introducing students to the use of the chemical literature to facilitate their searching, as well as deliberate constraints designed to force them to think critically about reaction design and optimization in organic chemistry. The project also introduces students to some advanced laboratory practices such as Schlenk techniques, degassing of reaction mixtures, affinity chromatography, and microwave-assisted chemistry. This provides students a teaching laboratory experience that closely mirrors authentic synthetic organic chemistry practice in laboratories throughout the world.

The knee adduction moment measured with an instrumented force shoe in patients with knee osteoarthritis

NARCIS (Netherlands)

van den Noort, J.C.; van den Noort, Josien C.; van der Esch, Martin; Steultjens, Martijn P.M.; Dekker, Joost; Schepers, H. Martin; Veltink, Petrus H.; Harlaar, Jaap

2012-01-01

The external knee adduction moment (KAdM) during gait is an important parameter in patients with knee osteoarthritis (OA). KAdM measurement is currently restricted to instruments only available in gait laboratories. However, ambulatory movement analysis technology, including instrumented force shoes

Modeling the Creation of Actionable Knowledge within a Joint Task Force Command System (Project GNOSIS)

Science.gov (United States)

2006-08-01

Force Research Laboratory This report is published in the interest of scientific and technical information exchange, and its publication does not...SYSTEM SJ SYSTEM INTERACTIONS AND INFLUENCES SOCIAL ORGANIZATIONAL SYSTEM SYSTEM I Multiple actors egaglng In comunities of Commrunitles of Interest

The laboratory information float, time-based competition, and point-of-care testing.

Science.gov (United States)

Friedman, B A

1994-01-01

A new term, the laboratory information float, should be substituted for turnaround-time when evaluating the performance of the clinical laboratory because it includes the time necessary to make test results both available (ready to use) and accessible (easy to use) to clinicians ordering tests. The laboratory information float can be greatly reduced simply by telescoping the analytic phase of laboratory testing into the preanalytic phase. Significant costs are incurred by such a change, some of which can be reduced by developing a mobile clinical laboratory (sometimes referred to as a "lab-on-a-slab" or "rolling thunder") to transport the analytic devices directly to patient care units. The mobile clinical laboratory should be equipped with an integrated personal computer that can communicate continuously with the host laboratory information system and achieve some semblance of continuous flow processing despite test performance in point-of-care venues. Equipping clinicians with palmtop computers will allow the mobile clinician to access test results and order tests on the run. Such devices can be easily configured to operate in a passive mode, accessing relevant information automatically instead of forcing clinicians to query the laboratory information system periodically for the test results necessary to render care to their patients. The laboratory information float of the year 2,000 will surely be measured in minutes through the judicious deployment of relevant technology such as mobile clinical laboratories and palmtop computers.

Factors influencing power hand tool fastening accuracy and reaction forces.

Science.gov (United States)

Radwin, Robert G; Chourasia, Amrish O; Howery, Robert S; Fronczak, Frank J; Yen, Thomas Y; Subedi, Yashpal; Sesto, Mary E

2014-06-01

A laboratory study investigated the relationship between power hand tool and task-related factors affecting threaded fastener torque accuracy and associated handle reaction force. We previously developed a biodynamic model to predict handle reaction forces. We hypothesized that torque accuracy was related to the same factors that affect operator capacity to react against impulsive tool forces, as predicted by the model. The independent variables included tool (pistol grip on a vertical surface, right angle on a horizontal surface), fastener torque rate (hard, soft), horizontal distance (30 cm and 60 cm), and vertical distance (80 cm, 110 cm, and 140 cm). Ten participants (five male and five female) fastened 12 similar bolts for each experimental condition. Average torque error (audited - target torque) was affected by fastener torque rate and operator position. Torque error decreased 33% for soft torque rates, whereas handle forces greatly increased (170%). Torque error also decreased for the far horizontal distance 7% to 14%, when vertical distance was in the middle or high, but handle force decreased slightly 3% to 5%. The evidence suggests that although both tool and task factors affect fastening accuracy, they each influence handle reaction forces differently. We conclude that these differences are attributed to different parameters each factor influences affecting the dynamics of threaded faster tool operation. Fastener torque rate affects the tool dynamics, whereas posture affects the spring-mass-damping biodynamic properties of the human operator. The prediction of handle reaction force using an operator biodynamic model may be useful for codifying complex and unobvious relationships between tool and task factors for minimizing torque error while controlling handle force.

Life sciences: Lawrence Berkeley Laboratory, 1988

Energy Technology Data Exchange (ETDEWEB)

1989-07-01

Life Sciences Research at LBL has both a long history and a new visibility. The physics technologies pioneered in the days of Ernest O. Lawrence found almost immediate application in the medical research conducted by Ernest's brother, John Lawrence. And the tradition of nuclear medicine continues today, largely uninterrupted for more than 50 years. Until recently, though, life sciences research has been a secondary force at the Lawrence Berkeley Laboratory (LBL). Today, a true multi-program laboratory has emerged, in which the life sciences participate as a full partner. The LBL Human Genome Center is a contribution to the growing international effort to map the human genome. Its achievements represent LBL divisions, including Engineering, Materials and Chemical Sciences, and Information and Computing Sciences, along with Cell and Molecular Biology and Chemical Biodynamics. The Advanced Light Source Life Sciences Center will comprise not only beamlines and experimental end stations, but also supporting laboratories and office space for scientists from across the US. This effort reflects a confluence of scientific disciplines --- this time represented by individuals from the life sciences divisions and by engineers and physicists associated with the Advanced Light Source project. And finally, this report itself, the first summarizing the efforts of all four life sciences divisions, suggests a new spirit of cooperation. 30 figs.

Nuclear Plant Analyzer development at the Idaho National Engineering Laboratory

International Nuclear Information System (INIS)

Laats, E.T.

1986-10-01

The Nuclear Plant Analyzer (NPA) is a state-of-the-art safety analysis and engineering tool being used to address key nuclear power plant safety issues. Under the sponsorship of the US Nuclear Regulatory Commission (NRC), the NPA has been developed to integrate the NRC's computerized reactor behavior simulation codes such as RELAP5, TRAC-BWR and TRAC-PWR, with well-developed computer color graphics programs and large repositories of reactor design and experimental data. An important feature of the NPA is the capability to allow an analyst to redirect a RELAP5 or TRAC calculation as it progresses through its simulated scenario. The analyst can have the same power plant control capabilities as the operator of an actual plant. The NPA resides on the dual Control Data Corporation Cyber 176 mainframe computers at the Idaho National Engineering Laboratory and Cray-1S computers at the Los Alamos National Laboratory (LANL) and Kirtland Air Force Weapons Laboratory (KAFWL)

Ernest Orlando Lawrence Berkeley National Laboratory institutional plan, FY 1996--2001

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-11-01

The FY 1996--2001 Institutional Plan provides an overview of the Ernest Orlando Lawrence Berkeley National Laboratory mission, strategic plan, core business areas, critical success factors, and the resource requirements to fulfill its mission in support of national needs in fundamental science and technology, energy resources, and environmental quality. The Laboratory Strategic Plan section identifies long-range conditions that will influence the Laboratory, as well as potential research trends and management implications. The Core Business Areas section identifies those initiatives that are potential new research programs representing major long-term opportunities for the Laboratory, and the resources required for their implementation. It also summarizes current programs and potential changes in research program activity, science and technology partnerships, and university and science education. The Critical Success Factors section reviews human resources; work force diversity; environment, safety, and health programs; management practices; site and facility needs; and communications and trust. The Resource Projections are estimates of required budgetary authority for the Laboratory`s ongoing research programs. The Institutional Plan is a management report for integration with the Department of Energy`s strategic planning activities, developed through an annual planning process. The plan identifies technical and administrative directions in the context of the national energy policy and research needs and the Department of Energy`s program planning initiatives. Preparation of the plan is coordinated by the Office of Planning and Communications from information contributed by the Laboratory`s scientific and support divisions.

Implementation of Gas Chromatography and Microscale Distillation into the General Chemistry Laboratory Curriculum as Vehicles for Examining Intermolecular Forces

Science.gov (United States)

Csizmar, Clifford M.; Force, Dee Ann; Warner, Don L.

2011-01-01

As part of an NSF-funded Course Curriculum and Laboratory Improvement (CCLI) project that seeks, in part, to increase student exposure to scientific instrumentation, a gas chromatography experiment has been integrated into the second-semester general chemistry laboratory curriculum. The experiment uses affordable, commercially available equipment…

Conceptual and Laboratory Exercise to Apply Newton's Second Law to a System of Many Forces

Science.gov (United States)

Mungan, Carl E.

2012-01-01

A pair of objects on an inclined plane are connected together by a string. The upper object is then connected to a fixed post via a spring. The situation is first analysed as a classroom exercise in using free-body diagrams to solve Newton's second law for a system of objects upon which many different kinds of force are acting (string tension,…

MEASUREMENTS OF SHOCK WAVE FORCE IN SHOCK TUBE WITH INDIRECT METHODS

Directory of Open Access Journals (Sweden)

Mario Dobrilović

2005-12-01

Full Text Available Tests have been conducted at the “Laboratory for testing of civil explosives, detonators, electrical detonators and pyrotechnical materials”, Department for mining and geotechnics of the Faculty of mining, geology and petroleum engineering, University of Zagreb with the purpose of designing a detonator that would unite advantages of a non-electric system and the precision in regulation of time delay in electronic initiation system. Sum of energy released by the wave force in shock tube is a pre-condition for operation of the new detonator, and measurement of wave force is the first step in determining the sum of energy. The sum of energy is measured indirectly, based on two principles: movement sensors and strain.

An Analysis of Contract Management Processes at the Space and Missile Systems Center and the Air Force Life Cycle Management Center (Wright-Patterson) Using the Contract Management Maturity Model

Science.gov (United States)

2012-11-28

graduation, Capt Chang’s next assignment is at Los Angeles Air Force Base in the Space and Missile Systems Center (SMC). Capt Chang is unmarried with... married to the former Ms. Laura Hazzard, and they have three children, Madden, and twins Aubrey and Tyler. Captain Keith V. Philaphandeth is an Air...2012 SPONSORED RESEARCH TOPICS Acquisition Management  Acquiring Combat Capability via Public-Private Partnerships (PPPs)  BCA: Contractor vs

Thermo-mechanical cyclic testing of carbon-carbon primary structure for an SSTO vehicle

Science.gov (United States)

Croop, Harold C.; Leger, Kenneth B.; Lowndes, Holland B.; Hahn, Steven E.; Barthel, Chris A.

1999-01-01

An advanced carbon-carbon structural component is being experimentally evaluated for use as primary load carrying structure for future single-stage-to-orbit (SSTO) vehicles. The component is a wing torque box section featuring an advanced, three-spar design. This design features 3D-woven, angle-interlock skins, 3D integrally woven spar webs and caps, oxidation inhibited matrix, chemical vapor deposited (CVD) oxidation protection coating, and ceramic matrix composite fasteners. The box spar caps are nested into the skins which, when processed together through the carbon-carbon processing cycle, resulted in monolithic box halves. The box half sections were then joined at the spar web intersections using ceramic matrix composite fasteners. This method of fabrication eliminated fasteners through both the upper and lower skins. Development of the carbon-carbon wing box structure was accomplished in a four phase design and fabrication effort, conducted by Boeing, Information, Space and Defense Systems, Seattle, WA, under contract to the Air Force Research Laboratory (AFRL). The box is now set up for testing and will soon begin cyclic loads testing in the AFRL Structural Test Facility at Wright-Patterson Air Force Base (WPAFB), OH. This paper discusses the latest test setup accomplishments and the results of the pre-cyclic loads testing performed to date.

Thermo-mechanical evaluation of carbon-carbon primary structure for SSTO vehicles

Science.gov (United States)

Croop, Harold C.; Lowndes, Holland B.; Hahn, Steven E.; Barthel, Chris A.

1998-01-01

An advanced development program to demonstrate carbon-carbon composite structure for use as primary load carrying structure has entered the experimental validation phase. The component being evaluated is a wing torque box section for a single-stage-to-orbit (SSTO) vehicle. The validation or demonstration component features an advanced carbon-carbon design incorporating 3D woven graphite preforms, integral spars, oxidation inhibited matrix, chemical vapor deposited (CVD) oxidation protection coating, and ceramic matrix composite fasteners. The validation component represents the culmination of a four phase design and fabrication development effort. Extensive developmental testing was performed to verify material properties and integrity of basic design features before committing to fabrication of the full scale box. The wing box component is now being set up for testing in the Air Force Research Laboratory Structural Test Facility at Wright-Patterson Air Force Base, Ohio. One of the important developmental tests performed in support of the design and planned testing of the full scale box was the fabrication and test of a skin/spar trial subcomponent. The trial subcomponent incorporated critical features of the full scale wing box design. This paper discusses the results of the trial subcomponent test which served as a pathfinder for the upcoming full scale box test.

Flight Testing of Novel Compliant Spines for Passive Wing Morphing on Ornithopters

Science.gov (United States)

Wissa, Aimy; Guerreiro, Nelson; Grauer, Jared; Altenbuchner, Cornelia; Hubbard, James E., Jr.; Tummala, Yashwanth; Frecker, Mary; Roberts, Richard

2013-01-01

Unmanned Aerial Vehicles (UAVs) are proliferating in both the civil and military markets. Flapping wing UAVs, or ornithopters, have the potential to combine the agility and maneuverability of rotary wing aircraft with excellent performance in low Reynolds number flight regimes. The purpose of this paper is to present new free flight experimental results for an ornithopter equipped with one degree of freedom (1DOF) compliant spines that were designed and optimized in terms of mass, maximum von-Mises stress, and desired wing bending deflections. The spines were inserted in an experimental ornithopter wing spar in order to achieve a set of desired kinematics during the up and down strokes of a flapping cycle. The ornithopter was flown at Wright Patterson Air Force Base in the Air Force Research Laboratory Small Unmanned Air Systems (SUAS) indoor flight facility. Vicon motion tracking cameras were used to track the motion of the vehicle for five different wing configurations. The effect of the presence of the compliant spine on wing kinematics and leading edge spar deflection during flight is presented. Results show that the ornithopter with the compliant spine inserted in its wing reduced the body acceleration during the upstroke which translates into overall lift gains.

Can Water-Injected Turbomachines Provide Cost-Effective Emissions and Maintenance Reductions?

Science.gov (United States)

Hendricks, Robert C.; Daggett, David L.; Shouse, Dale T.; Roquemore, William M.; Brankovic, Andreja; Ryder, Robert C., Jr.

2011-01-01

An investigation has been performed to evaluate the effect of water injection on the performance of the Air Force Research Laboratory (AFRL, Wright-Patterson Air Force Base (WPAFB)) experimental trapped vortex combustor (TVC) over a range of fuel-to-air and water-to-fuel ratios. Performance is characterized by combustor exit quantities: temperature and emissions measurements using rakes, and overall pressure drop, from upstream plenum to combustor exit. Combustor visualization is performed using gray-scale and color still photographs and high-frame-rate videos. A parallel investigation evaluated the performance of a computational fluid dynamics (CFD) tool for the prediction of the reacting flow in a liquid fueled combustor (e.g., TVC) that uses water injection for control of pollutant emissions and turbine inlet temperature. Generally, reasonable agreement is found between data and NO(x) computations. Based on a study assessing the feasibility and performance impact of using water injection on a Boeing 747-400 aircraft to reduce NO(x) emissions during takeoff, retrofitting does not appear to be cost effective; however, an operator of a newly designed engine and airframe might be able to save up to 1.0 percent in operating costs. Other challenges of water injection will be discussed.

The AFGL (Air Force Geophysics Laboratory) Absolute Gravity System’s Error Budget Revisted.

Science.gov (United States)

1985-05-08

also be induced by equipment not associated with the system. A systematic bias of 68 pgal was observed by the Istituto di Metrologia "G. Colonnetti...Laboratory Astrophysics, Univ. of Colo., Boulder, Colo. IMGC: Istituto di Metrologia "G. Colonnetti", Torino, Italy Table 1. Absolute Gravity Values...measurements were made with three Model D and three Model G La Coste-Romberg gravity meters. These instruments were operated by the following agencies

Laboratory Response to Ebola - West Africa and United States.

Science.gov (United States)

Sealy, Tara K; Erickson, Bobbie R; Taboy, Céline H; Ströher, Ute; Towner, Jonathan S; Andrews, Sharon E; Rose, Laura E; Weirich, Elizabeth; Lowe, Luis; Klena, John D; Spiropoulou, Christina F; Rayfield, Mark A; Bird, Brian H

2016-07-08

The 2014-2016 Ebola virus disease (Ebola) epidemic in West Africa highlighted the need to maintain organized laboratory systems or networks that can be effectively reorganized to implement new diagnostic strategies and laboratory services in response to large-scale events. Although previous Ebola outbreaks enabled establishment of critical laboratory practice safeguards and diagnostic procedures, this Ebola outbreak in West Africa highlighted the need for planning and preparedness activities that are better adapted to emerging pathogens or to pathogens that have attracted little commercial interest. The crisis underscored the need for better mechanisms to streamline development and evaluation of new diagnostic assays, transfer of material and specimens between countries and organizations, and improved processes for rapidly deploying health workers with specific laboratory expertise. The challenges and events of the outbreak forced laboratorians to examine not only the comprehensive capacities of existing national laboratory systems to recognize and respond to events, but also their sustainability over time and the mechanisms that need to be pre-established to ensure effective response. Critical to this assessment was the recognition of how response activities (i.e., infrastructure support, logistics, and workforce supplementation) can be used or repurposed to support the strengthening of national laboratory systems during the postevent transition to capacity building and recovery. This report compares CDC's domestic and international laboratory response engagements and lessons learned that can improve future responses in support of the International Health Regulations and Global Health Security Agenda initiatives.The activities summarized in this report would not have been possible without collaboration with many U.S. and international partners (http://www.cdc.gov/vhf/ebola/outbreaks/2014-west-africa/partners.html).

Examination of forced unsteady separated flow fields on a rotating wind turbine blade

Energy Technology Data Exchange (ETDEWEB)

Huyer, S [Univ. of Colorado, Boulder, CO (US)

1993-04-01

The wind turbine industry faces many problems regarding the construction of efficient and predictable wind turbine machines. Steady state, two-dimensional wind tunnel data are generally used to predict aerodynamic loads on wind turbine blades. Preliminary experimental evidence indicates that some of the underlying fluid dynamic phenomena could be attributed to dynamic stall, or more specifically to generation of forced unsteady separated flow fields. A collaborative research effort between the University of Colorado and the National Renewable Energy Laboratory was conducted to systematically categorize the local and global effects of three- dimensional forced unsteady flow fields.

Guidelines for random excitation forces due to cross flow in steam generators

Energy Technology Data Exchange (ETDEWEB)

Taylor, C.E.; Pettigrew, M.J. [Atomic Energy of Canada Limited, Chalk River, Ontario (Canada)

1998-07-01

Random excitation forces can cause low-amplitude tube motion that will result in long-term fretting-wear or fatigue. To prevent these tube failures in steam generators and other heat exchangers, designers and trouble-shooters must have guidelines that incorporate random or turbulent fluid forces. Experiments designed to measure fluid forces have been carried out at Chalk River Laboratories and at other labs around the world. The data from these experiments have been studied and collated to determine suitable guidelines for random excitation forces. In this paper, a guideline for random excitation forces in single-phase cross flow is presented in the form of normalised spectra that are applicable to a wide range of flow conditions and tube frequencies. In particular, the experimental results used in this study were carried out over the full range of flow conditions found in a nuclear steam generator. The proposed guidelines are applicable to steam generators, condensers, reheaters and other shell-and-tube heat exchangers. They may be used for flow-induced vibration analysis of new or existing components, as input to vibration analysis computer codes and as specifications in procurement documents. (author)

Guidelines for random excitation forces due to cross flow in steam generators

International Nuclear Information System (INIS)

Taylor, C.E.; Pettigrew, M.J.

1998-01-01

Random excitation forces can cause low-amplitude tube motion that will result in long-term fretting-wear or fatigue. To prevent these tube failures in steam generators and other heat exchangers, designers and trouble-shooters must have guidelines that incorporate random or turbulent fluid forces. Experiments designed to measure fluid forces have been carried out at Chalk River Laboratories and at other labs around the world. The data from these experiments have been studied and collated to determine suitable guidelines for random excitation forces. In this paper, a guideline for random excitation forces in single-phase cross flow is presented in the form of normalised spectra that are applicable to a wide range of flow conditions and tube frequencies. In particular, the experimental results used in this study were carried out over the full range of flow conditions found in a nuclear steam generator. The proposed guidelines are applicable to steam generators, condensers, reheaters and other shell-and-tube heat exchangers. They may be used for flow-induced vibration analysis of new or existing components, as input to vibration analysis computer codes and as specifications in procurement documents. (author)

Golden Legacy, Boundless Future: Essays on the United States Air Force and the Rise of Aerospace Power

Science.gov (United States)

2000-01-01

wholly lost on the American psyche. The advances that did occur in American aviation were due to a handful of dedicated entrepreneurs and scientists whom...and stability than could have been predicted as waves of German youths tore down the Berlin Wall and images of a new millennial age of peace, freedom...Peen~munde group. Goddard represents the old approach used by Thomas Edison and the Wright brothers. Here, the lone entrepreneur -inventor gathered

Comparison of different strategies for decommissioning a tritium laboratory

International Nuclear Information System (INIS)

Kris Dylst

2009-01-01

Full text: Between 2003 and 2009 two rooms that served as tritium laboratory at SCK-CEN and its ventilation system were decommissioned. Initially, the decommissioning strategy was to free release as much materials as possible. The low free release limit imposed by the Belgian authorities made decommissioning of the first laboratory room very labor intensive. Timing restrictions forced us to use a different strategy for the ventilation system. Steel that could not be easily decontaminated was disposed to a nuclear melting facility. Compared to similar work done on steel in the lab, the new strategy took less than 80% of the man hours in only 40% of the calendar days. For the second laboratory a similar strategy was used: contaminated steel was disposed to a nuclear melting facility, other materials that could not be easily decontaminated were disposed as nuclear waste. Compared to the first laboratory the decommissioning was done in less than 40% of the time using merely one third of the man hours, although at the expense of extra waste generation. Economically, as far as not easily decontaminated materials are concerned, steel is best disposed to a nuclear melting and it is worth to invest in the decontamination of other materials. (author)

Subatomic forces

International Nuclear Information System (INIS)

Sutton, C.

1989-01-01

Inside the atom, particles interact through two forces which are never felt in the everyday world. But they may hold the key to the Universe. These ideas on subatomic forces are discussed with respect to the strong force, the electromagnetic force and the electroweak force. (author)

Importance of upper-limb inertia in calculating concentric bench press force.

Science.gov (United States)

Rambaud, Olivier; Rahmani, Abderrahmane; Moyen, Bernard; Bourdin, Muriel

2008-03-01

The purpose of this study was to investigate the influence of upper-limb inertia on the force-velocity relationship and maximal power during concentric bench press exercise. Reference peak force values (Fpeakp) measured with a force plate positioned below the bench were compared to those measured simultaneously with a kinematic device fixed on the barbell by taking (Fpeakt) or not taking (Fpeakb) upper-limb inertia into account. Thirteen men (27.8 +/- 4.1 years, 184.6 +/- 5.5 cm, 99.5 +/- 18.6 kg) performed all-out concentric bench press exercise against 8 loads ranging between 7 and 74 kg. The results showed that for each load, Fpeakb was significantly less than Fpeakp (P force (F0), maximal velocity (V0), optimal velocity (Vopt), and maximal power (Pmax), extrapolated from the force- and power-velocity relationships determined with the kinematic device, were significantly underestimated when upper-limb inertia was ignored. The results underline the importance of taking account of the total inertia of the moving system to ensure precise evaluation of upper-limb muscular characteristics in all-out concentric bench press exercise with a kinematic device. A major application of this study would be to develop precise upper-limb muscular characteristic evaluation in laboratory and field conditions by using a simple and cheap kinematic device.

Quadriceps force and anterior tibial force occur obviously later than vertical ground reaction force: a simulation study

OpenAIRE

Ueno, Ryo; Ishida, Tomoya; Yamanaka, Masanori; Taniguchi, Shohei; Ikuta, Ryohei; Samukawa, Mina; Saito, Hiroshi; Tohyama, Harukazu

2017-01-01

Background: Although it is well known that quadriceps force generates anterior tibial force, it has been unclear whether quadriceps force causes great anterior tibial force during the early phase of a landing task. The purpose of the present study was to examine whether the quadriceps force induced great anterior tibial force during the early phase of a landing task. Methods: Fourteen young, healthy, female subjects performed a single-leg landing task. Muscle force and anterior tibial force w...

Environmental Assessment for New Veterinary Clinic at Wright Patterson Air Force Base, Dayton, Ohio

Science.gov (United States)

2007-08-01

English sparrow (Passer domesticus), mockingbird (Mimus polyglottos), and red- winged black bird (Agelaius phoeniceus). 3.3.3 Threatened and...addition, airfield safety zones have been established under AICUZ to minimize the number of people who would be injured or killed if an aircraft

Environmental Assessment for the Hilltop Community Services District, Wright-Patterson Air Force Base, Ohio

Science.gov (United States)

2012-03-01

land  complexes. Small areas of residual soils over  limestone  and shale  bedrock  exist on steep slopes in the  eastern portion of Area B.  The two...cultural resources, environmental justice/protection of children, geology , land use, water resources, infrastructure, and visual resources...disproportionately or adversely affected by the action. Geology and Soils (EA Se1ction 4.4): There would be no excess fill excavated during site preparation and

Environmental Assessment for the Aeromedical Evacuation Formal Training Unit, Wright-Patterson Air Force Base

Science.gov (United States)

2012-05-01

pennsylvanica), White Ash (Fraxinus americana), Shingle Oak (Quercus imbricaria), Northern Red Oak (Quercus rubra), Slippery Elm (Ulmus rubra...American Elm (Ulmus americana), Eastern Cottonwood (Populus deltoides), Silver Maple (Acer saccharinum), Sassafras (Sassafras albidum), Post Oak (Quercus

An Inexpensive Biophysics Laboratory Apparatus for Acquiring Pulmonary Function Data with Clinical Applications

Science.gov (United States)

Harkay, Gregory

2001-11-01

Interest on the part of the Physics Department at KSC in developing a computer interfaced lab with appeal to biology majors and a need to perform a clinical pulmonological study to fulfill a biology requirement led to the author's undergraduate research project in which a recording spirometer (typical cost: $15K) was constructed from readily available materials and a typical undergraduate lab computer interface. Simple components, including a basic photogate circuit, CPU fan, and PVC couplings were used to construct an instrument for measuring flow rates as a function of time. Pasco software was used to build an experiment in which data was collected and integration performed such that one could obtain accurate values for FEV1 (forced expiratory volume for one second) and FVC (forced vital capacity) and their ratio for a large sample of subjects. Results were compared to published norms and subjects with impaired respiratory mechanisms identified. This laboratory exercise is one with which biology students can clearly identify and would be a robust addition to the repertoire for a HS or college physics or biology teaching laboratory.

Proceedings of the IRI Task Force Activity 2001

International Nuclear Information System (INIS)

Radicella, S.M.

2002-08-01

This ICTP Internal Report contains the list of papers presented, activity report and the write up of a number of presentations delivered during the International Reference Ionosphere (IRI) Task Force Activity 2001 which took place at the Abdus Salam ICTP during May 2001, particularly centred in the week from 21-25 May. The 2001 Task Force Activity is the eighth successful encounter of specialists organized by the URSI-Cospar IRI Working Group and the Aeronomy and Radiopropagation Laboratory of the Abdus Salam International Centre for Theoretical Physics of Trieste, Italy. This project continues the IRI Task Force Activities at the Abdus Salam International Centre for Theoretical Physics (ICTP) in Trieste, Italy. The primary focus of this activity was the development of a specification model for ionospheric variability. Such a model is high on the wish list of users of ionospheric models. Climatological models like IRI provide monthly mean values of ionospheric parameters. Understandably a satellite designer or operator needs to know not only the monthly average conditions but also the expected deviations from these mean values. The main discussions and presentations took place during the week 21-25 May. The format was similar to last year's activity with presentations and round-table discussions in the morning and follow-on work in small subgroups in front of computer terminals in the afternoon. This Proceedings contains also four papers of the previous IRI Task Force Activity which were omitted

Climate Implications of the Heterogeneity of Anthropogenic Aerosol Forcing

Science.gov (United States)

Persad, Geeta Gayatri

Short-lived anthropogenic aerosols are concentrated in regions of high human activity, where they interact with radiation and clouds, causing horizontally heterogeneous radiative forcing between polluted and unpolluted regions. Aerosols can absorb shortwave energy in the atmosphere, but deplete it at the surface, producing opposite radiative perturbations between the surface and atmosphere. This thesis investigates climate and policy implications of this horizontal and vertical heterogeneity of anthropogenic aerosol forcing, employing the Geophysical Fluid Dynamics Laboratory's AM2.1 and AM3 models, both at a global scale and using East Asia as a regional case study. The degree of difference between spatial patterns of climate change due to heterogeneous aerosol forcing versus homogeneous greenhouse gas forcing deeply impacts the detection, attribution, and prediction of regional climate change. This dissertation addresses a gap in current understanding of these two forcings' response pattern development, using AM2.1 historical forcing simulations. The results indicate that fast atmospheric and land-surface processes alone substantially homogenize the global pattern of surface energy flux response to heterogeneous aerosol forcing. Aerosols' vertical redistribution of energy significantly impacts regional climate, but is incompletely understood. It is newly identified here, via observations and historical and idealized forcing simulations, that increased aerosol-driven atmospheric absorption may explain half of East Asia's recent surface insolation decline. Further, aerosols' surface and atmospheric effects counteract each other regionally---atmospheric heating enhances summer monsoon circulation, while surface dimming suppresses it---but absorbing aerosols' combined effects reduce summer monsoon rainfall. This thesis constitutes the first vertical decomposition of aerosols' impacts in this high-emissions region and elucidates the monsoonal response to aerosols

Forces on stationary particles in near-bed turbulent flows

Science.gov (United States)

Schmeeckle, Mark W.; Nelson, Jonathan M.; Shreve, Ronald L.

2007-06-01

In natural flows, bed sediment particles are entrained and moved by the fluctuating forces, such as lift and drag, exerted by the overlying flow on the particles. To develop a better understanding of these forces and the relation of the forces to the local flow, the downstream and vertical components of force on near-bed fixed particles and of fluid velocity above or in front of them were measured synchronously at turbulence-resolving frequencies (200 or 500 Hz) in a laboratory flume. Measurements were made for a spherical test particle fixed at various heights above a smooth bed, above a smooth bed downstream of a downstream-facing step, and in a gravel bed of similarly sized particles as well as for a cubical test particle and 7 natural particles above a smooth bed. Horizontal force was well correlated with downstream velocity and not correlated with vertical velocity or vertical momentum flux. The standard drag formula worked well to predict the horizontal force, but the required value of the drag coefficient was significantly higher than generally used to model bed load motion. For the spheres, cubes, and natural particles, average drag coefficients were found to be 0.76, 1.36, and 0.91, respectively. For comparison, the drag coefficient for a sphere settling in still water at similar particle Reynolds numbers is only about 0.4. The variability of the horizontal force relative to its mean was strongly increased by the presence of the step and the gravel bed. Peak deviations were about 30% of the mean force for the sphere over the smooth bed, about twice the mean with the step, and 4 times it for the sphere protruding roughly half its diameter above the gravel bed. Vertical force correlated poorly with downstream velocity, vertical velocity, and vertical momentum flux whether measured over or ahead of the test particle. Typical formulas for shear-induced lift based on Bernoulli's principle poorly predict the vertical forces on near-bed particles. The

The cardiovascular and endocrine responses to voluntary and forced diving in trained and untrained rats

Science.gov (United States)

DiNovo, Karyn. M.; Connolly, Tiffanny M.

2010-01-01

The mammalian diving response, consisting of apnea, bradycardia, and increased total peripheral resistance, can be modified by conscious awareness, fear, and anticipation. We wondered whether swim and dive training in rats would 1) affect the magnitude of the cardiovascular responses during voluntary and forced diving, and 2) whether this training would reduce or eliminate any stress due to diving. Results indicate Sprague-Dawley rats have a substantial diving response. Immediately upon submersion, heart rate (HR) decreased by 78%, from 453 ± 12 to 101 ± 8 beats per minute (bpm), and mean arterial pressure (MAP) decreased 25%, from 143 ± 1 to 107 ± 5 mmHg. Approximately 4.5 s after submergence, MAP had increased to a maximum 174 ± 3 mmHg. Blood corticosterone levels indicate trained rats find diving no more stressful than being held by a human, while untrained rats find swimming and diving very stressful. Forced diving is stressful to both trained and untrained rats. The magnitude of bradycardia was similar during both voluntary and forced diving, while the increase in MAP was greater during forced diving. The diving response of laboratory rats, therefore, appears to be dissimilar from that of other animals, as most birds and mammals show intensification of diving bradycardia during forced diving compared with voluntary diving. Rats may exhibit an accentuated antagonism between the parasympathetic and sympathetic branches of the autonomic nervous system, such that in the autonomic control of HR, parasympathetic activity overpowers sympathetic activity. Additionally, laboratory rats may lack the ability to modify the degree of parasympathetic outflow to the heart during an intense cardiorespiratory response (i.e., the diving response). PMID:19923359

Confidence Intervals for System Reliability and Availability of Maintained Systems Using Monte Carlo Techniques

Science.gov (United States)

1981-12-01

DTIC _JUN ,I 51982 UNITED STATES AIR FORCE AIR UNIVERSITY E AIR FORCE INSTITUTE OF TECHNOLOGY Wright-Patterson Air-force Base,Ohio S 2 B 14 Best...t’re Air F:or- e -ns"it’.,, e of Technclogy Air Uv-ýerz.tyj in Partial 𔄁ulfilIThent Reýquirements fol- ,-hth D,ýýr.e c4" MastLer of’ OperaZ-ins...iesearc- VeTA 3 MohamedO ’’’’Jo SpD’ Fas.abal-la Lt. C ol. Egyplt.’.an Army Gradua~’p ( ler ons Research December 1981 Approcved fL~r pu>ý’ rclea.se

Exoskeleton master controller with force-reflecting telepresence

Science.gov (United States)

Burke, James B.; Bartholet, Stephen J.; Nelson, David K.

1992-01-01

A thorough understanding of the requirements for successful master-slave robotic systems is becoming increasingly desirable. Such systems can aid in the accomplishment of tasks that are hazardous or inaccessible to humans. Although a history of use has proven master-slave systems to be viable, system requirements and the impact of specifications on the human factors side of system performance are not well known. In support of the next phase of teleoperation research being conducted at the Armstrong Research Laboratory, a force-reflecting, seven degree of freedom exoskeleton for master-slave teleoperation has been concepted, and is presently being developed. The exoskeleton has a unique kinematic structure that complements the structure of the human arm. It provides a natural means for teleoperating a dexterous, possibly redundant manipulator. It allows ease of use without operator fatigue and faithfully follows human arm and wrist motions. Reflected forces and moments are remotely transmitted to the operator hand grip using a cable transmission scheme. This paper presents the exoskeleton concept and development results to date. Conceptual design, hardware, algorithms, computer architecture, and software are covered.

Adding Value to Force Diagrams: Representing Relative Force Magnitudes

Science.gov (United States)

Wendel, Paul

2011-05-01

Nearly all physics instructors recognize the instructional value of force diagrams, and this journal has published several collections of exercises to improve student skill in this area.1-4 Yet some instructors worry that too few students perceive the conceptual and problem-solving utility of force diagrams,4-6 and over recent years a rich variety of approaches has been proposed to add value to force diagrams. Suggestions include strategies for identifying candidate forces,6,7 emphasizing the distinction between "contact" and "noncontact" forces,5,8 and the use of computer-based tutorials.9,10 Instructors have suggested a variety of conventions for constructing force diagrams, including approaches to arrow placement and orientation2,11-13 and proposed notations for locating forces or marking action-reaction force pairs.8,11,14,15

Information Analysis Centers in the Department of Defense. Revision

Science.gov (United States)

1987-07-01

Combat Data Information Center (CDIC) and the Aircraft Survivability Model Repository ( ASMR ) into the Survivability/Vulnerability Information Analysis...Information Center (CDIC) and the Aircraft Survivability Model Respository ( ASMR ). The CDIC was a central repository for combat and test data related to...and ASMR were operated under the technical monitorship of the Flight Dynamics Laboratory at Wright-Patterson AFB, Ohio and were located in Flight

Cancer incidence among workers at the Los Alamos National Laboratory

International Nuclear Information System (INIS)

Acquavella, J.J.; Wilkinson, G.S.; Wiggs, L.D.; Reyes-Waxweiler, M.; Key, C.R.; Tietjen, G.L.

1985-01-01

An analysis of cancer incidence among Los Alamos workers was reported at the Sixteenth Mid-Year Topical Symposium of the Health Physics Society. Cancer incidence was especially low among Anglo-American males for cancer of the lung and oral cancer, cancer sites commonly associated with cigarette smoking. No cases of cancer of the lung, oral cavity, pancreas, or bladder were observed among Anglo-American females in the population. Standardized incidence ratios for cancer of the breast and cancer of the uterine corpus exceeded one; however, these findings were not statistically significant. These findings are consistent with expectation for a population of high socioeconomic class, such as the Laboratory work force. Therefore, working conditions at the Laboratory do not appear to have affected cancer incidence in this population. 1 reference, 2 tables

Developing a Virtual Rock Deformation Laboratory

Science.gov (United States)

Zhu, W.; Ougier-simonin, A.; Lisabeth, H. P.; Banker, J. S.

2012-12-01

Experimental rock physics plays an important role in advancing earthquake research. Despite its importance in geophysics, reservoir engineering, waste deposits and energy resources, most geology departments in U.S. universities don't have rock deformation facilities. A virtual deformation laboratory can serve as an efficient tool to help geology students naturally and internationally learn about rock deformation. Working with computer science engineers, we built a virtual deformation laboratory that aims at fostering user interaction to facilitate classroom and outreach teaching and learning. The virtual lab is built to center around a triaxial deformation apparatus in which laboratory measurements of mechanical and transport properties such as stress, axial and radial strains, acoustic emission activities, wave velocities, and permeability are demonstrated. A student user can create her avatar to enter the virtual lab. In the virtual lab, the avatar can browse and choose among various rock samples, determine the testing conditions (pressure, temperature, strain rate, loading paths), then operate the virtual deformation machine to observe how deformation changes physical properties of rocks. Actual experimental results on the mechanical, frictional, sonic, acoustic and transport properties of different rocks at different conditions are compiled. The data acquisition system in the virtual lab is linked to the complied experimental data. Structural and microstructural images of deformed rocks are up-loaded and linked to different deformation tests. The integration of the microstructural image and the deformation data allows the student to visualize how forces reshape the structure of the rock and change the physical properties. The virtual lab is built using the Game Engine. The geological background, outstanding questions related to the geological environment, and physical and mechanical concepts associated with the problem will be illustrated on the web portal. In

Autonomous Warplanes: NASA Rovers Lead the Way

Science.gov (United States)

2016-04-01

Warplanes NASA Rovers Lead the Way Michael R. Schroer Major, Air National Guard Wright Flyer No. 54 Air University Press Air Force Research Institute...between most airports across the continent proved an excellent further education in aviation. Piloting a business jet on a weeklong, 11- hop trek across...Research con- ducted by the National Aeronautics and Space Administration ( NASA ) offers useful lessons for the development of future military RPAs

Life-Cycle Costs of Alternative ICBM Second Stage Designs

Science.gov (United States)

1992-09-01

of Logistics, Air Force Institute of Technology (AU), Wright-Patterson AFB OH, 1992. 34. Horngren , Charles T. and George Foster. Cost Accounting ; A...Managerial Emphasis (Sixth Edition). Englewood Cliffs NJ: Prentice-Hall, Inc., 1987. 35. Horngren , Charles T. and George Foster. Cost Accounting ; A...our research. We would also like to thank those involved with the 1991 Small ICBM Operations and Support cost estimate. Your assistance with the O& S

Mobile Energy Laboratory energy-efficiency testing programs

International Nuclear Information System (INIS)

Parker, G.B.; Currie, J.W.

1992-03-01

This report summarizes energy-efficiency testing activities applying the Mobile Energy Laboratory (MEL) testing capabilities during the third and fourth quarters of fiscal year (FY) 1991. The MELs, developed by the US Department of Energy (DOE) Federal Energy Management Program (FEMP), are administered by Pacific Northwest Laboratory (PNL) and the Naval Energy and Environmental Support Activity (NEESA) for energy testing and energy conservation program support functions at federal facilities. The using agencies principally fund MEL applications, while DOE/FEMP funds program administration and capability enhancement activities. This report fulfills the requirements established in Section 8 of the MEL Use Plan (PNL-6861) for semi-annual reporting on energy-efficiency testing activities using the MEL capabilities. The MEL Use Committee, formally established in 1989, developed the MEL Use Plan and meets semi-annually to establish priorities for energy-efficient testing applications using the MEL capabilities. The MEL Use Committee is composed of one representative each of the US Department of Energy, US Army, US Air Force, US Navy, and other federal agencies

Mobile Energy Laboratory energy-efficiency testing programs

Energy Technology Data Exchange (ETDEWEB)

Parker, G B; Currie, J W

1992-03-01

This report summarizes energy-efficiency testing activities applying the Mobile Energy Laboratory (MEL) testing capabilities during the third and fourth quarters of fiscal year (FY) 1991. The MELs, developed by the US Department of Energy (DOE) Federal Energy Management Program (FEMP), are administered by Pacific Northwest Laboratory (PNL) and the Naval Energy and Environmental Support Activity (NEESA) for energy testing and energy conservation program support functions at federal facilities. The using agencies principally fund MEL applications, while DOE/FEMP funds program administration and capability enhancement activities. This report fulfills the requirements established in Section 8 of the MEL Use Plan (PNL-6861) for semi-annual reporting on energy-efficiency testing activities using the MEL capabilities. The MEL Use Committee, formally established in 1989, developed the MEL Use Plan and meets semi-annually to establish priorities for energy-efficient testing applications using the MEL capabilities. The MEL Use Committee is composed of one representative each of the US Department of Energy, US Army, US Air Force, US Navy, and other federal agencies.

Force and Directional Force Modulation Effects on Accuracy and Variability in Low-Level Pinch Force Tracking.

Science.gov (United States)

Park, Sangsoo; Spirduso, Waneen; Eakin, Tim; Abraham, Lawrence

2018-01-01

The authors investigated how varying the required low-level forces and the direction of force change affect accuracy and variability of force production in a cyclic isometric pinch force tracking task. Eighteen healthy right-handed adult volunteers performed the tracking task over 3 different force ranges. Root mean square error and coefficient of variation were higher at lower force levels and during minimum reversals compared with maximum reversals. Overall, the thumb showed greater root mean square error and coefficient of variation scores than did the index finger during maximum reversals, but not during minimum reversals. The observed impaired performance during minimum reversals might originate from history-dependent mechanisms of force production and highly coupled 2-digit performance.

Siberian Chemical Combine laboratory project work plan, fiscal year 1999

International Nuclear Information System (INIS)

Morgado, R.E.; Acobyan, R.; Shropsire, R.

1998-01-01

The Siberian Chemical Combine (SKhK), Laboratory Project Work Plan (Plan) is intended to assist the US Laboratory Project Team, and Department of Energy (DOE) staff with the management of the FY99 joint material protection control and accounting program (MPC and A) for enhancing nuclear material safeguards within the Siberian Chemical Combine. The DOE/Russian/Newly Independent States, Nuclear Material Task Force, uses a project work plan document for higher-level program management. The SKhK Plan is a component of the Russian Defense related Sites' input to that document. In addition, it contains task descriptions and a Gantt Chart covering the FY99 time-period. This FY99 window is part of a comprehensive, Project Status Gantt Chart for tasking and goal setting that extends to the year 2003. Secondary and tertiary levels of detail are incorporated therein and are for the use of laboratory project management. The SKhK Plan is a working document, and additions and modifications will be incorporated as the MPC and A project for SKhK evolves

Sultan - forced flow, high field test facility

International Nuclear Information System (INIS)

Horvath, I.; Vecsey, G.; Weymuth, P.; Zellweger, J.

1981-01-01

Three European laboratories: CNEN (Frascati, I) ECN (Petten, NL) and SIN (Villigen, CH) decided to coordinate their development efforts and to install a common high field forced flow test facility at Villigen Switzerland. The test facility SULTAN (Supraleiter Testanlage) is presently under construction. As a first step, an 8T/1m bore solenoid with cryogenic periphery will be ready in 1981. The cryogenic system, data acquisition system and power supplies which are contributed by SIN are described. Experimental feasibilities, including cooling, and instrumentation are reviewed. Progress of components and facility construction is described. Planned extension of the background field up to 12T by insert coils is outlined. 5 refs

Association between laboratory capacities and world-cup performance in Nordic combined.

Science.gov (United States)

Rasdal, Vegard; Fudel, Ronny; Kocbach, Jan; Moen, Frode; Ettema, Gertjan; Sandbakk, Øyvind

2017-01-01

Nordic combined (NC) is an Olympic winter-sport performed as a ski jumping (SJ) event followed by a cross-country (XC) pursuit race employing the skating style. To elucidate the associations between sport-specific laboratory capacities and SJ, XC skiing, and overall NC performance in a world-cup NC event. Twelve international world-cup NC athletes from 8 nations performed laboratory testing one day prior to participating in a world-cup NC event. Squat jumps and SJ imitations (IMIT) were performed on a three-dimensional force plate, whereas XC skiing-specific physiological characteristics were obtained from roller ski skating tests on a treadmill and an all-out double poling (DP) test. Finally, body composition was measured. Laboratory capacities were correlated against performance in SJ, 10-km XC skiing, and overall NC in the world-cup event. Multiple regression analysis was used to determine the best suited laboratory variables for predicting performance. Vertical IMIT velocity together with body-mass provided the best prediction for SJ performance (r2 = 0.70, pjump capacity while minimizing body-mass within the BMI limit set by FIS should be considered in the seasonal training of NC athletes.

Estimation of vertical ground reaction forces and sagittal knee kinematics during running using three inertial sensors

NARCIS (Netherlands)

Wouda, Frank J.; Giuberti, Matteo; Bellusci, Giovanni; Maartens, Erik; Reenalda, Jasper; van Beijnum, Bernhard J.F.; Veltink, Peter H.

2018-01-01

Analysis of running mechanics has traditionally been limited to a gait laboratory using either force plates or an instrumented treadmill in combination with a full-body optical motion capture system. With the introduction of inertial motion capture systems, it becomes possible to measure kinematics

Sandia National Laboratories Institutional Plan: FY 1996--2001

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-31

Sandia`s Institutional Plan is by necessity a large document. As their missions have grown and diversified over the past decades, the variety of technical and site activities has increased. The programs and activities described here cover an enormous breadth of scientific and technological effort--from the creation of new materials to the development of a Sandia-wide electronic communications system. Today, there are three major themes that greatly influence this work. First, every federally funded institution is being challenged to find ways to become more cost effective, as the US seeks to reduce the deficit and achieve a balanced federal spending plan. Sandia is evaluating its business and operational processes to reduce the overall costs. Second, in response to the Galvin Task Force`s report ``Alternative Futures for the Department of Energy National Laboratories``, Sandia and the Department of Energy are working jointly to reduce the burden of administrative and compliance activities in order to devote more of the total effort to their principal research and development missions. Third, they are reevaluating the match between their missions and the programs they will emphasize in the future. They must demonstrate that Sandia`s roles--in national security, energy security, environmental integrity, and national scientific and technology agenda support--fit their special capabilities and skills and thus ensure their place in these missions for the longer planning horizon. The following areas are covered here: Sandia`s mission; laboratory directives; programmatic activities; technology partnerships and commercialization; Sandia`s resources; and protecting resources and the community.

Direct measurements of intermolecular forces by chemical force microscopy

Science.gov (United States)

Vezenov, Dmitri Vitalievich

1999-12-01

Detailed description of intermolecular forces is key to understanding a wide range of phenomena from molecular recognition to materials failure. The unique features of atomic force microscopy (AFM) to make point contact force measurements with ultra high sensitivity and to generate spatial maps of surface topography and forces have been extended to include measurements between well-defined organic molecular groups. Chemical modification of AFM probes with self-assembled monolayers (SAMs) was used to make them sensitive to specific molecular interactions. This novel chemical force microscopy (CFM) technique was used to probe forces between different molecular groups in a range of environments (vacuum, organic liquids and aqueous solutions); measure surface energetics on a nanometer scale; determine pK values of the surface acid and base groups; measure forces to stretch and unbind a short synthetic DNA duplex and map the spatial distribution of specific functional groups and their ionization state. Studies of adhesion forces demonstrated the important contribution of hydrogen bonding to interactions between simple organic functionalities. The chemical identity of the tip and substrate surfaces as well as the medium had a dramatic effect on adhesion between model monolayers. A direct correlation between surface free energy and adhesion forces was established. The adhesion between epoxy polymer and model mixed SAMs varied with the amount of hydrogen bonding component in the monolayers. A consistent interpretation of CFM measurements in polar solvents was provided by contact mechanics models and intermolecular force components theory. Forces between tips and surfaces functionalized with SAMs terminating in acid or base groups depended on their ionization state. A novel method of force titration was introduced for highly local characterization of the pK's of surface functional groups. The pH-dependent changes in friction forces were exploited to map spatially the

The role of response force on the persistence and structure of behavior during extinction.

Science.gov (United States)

Pinkston, Jonathan W; Foss, Erica K

2018-01-01

Behavior Momentum Theory has emerged as a prominent account of resistance to change in both basic and applied research. Although laboratory studies often define precise, repeatable responses, application research often deals with response classes that may vary widely along a number of dimensions. In general, Behavior Momentum Theory has not addressed how response dimensions impact resistance to change, providing an opportunity to expand the model in new directions. Four rats pressed a force transducer under a multiple variable interval (VI) 60-s VI 60-s schedule of reinforcement. In one component, responses satisfied the schedule only if the response force fell within a "low" force band requirement; responses in the other schedule were required to satisfy a "high" force band. Once responding stabilized, extinction was programmed for three sessions. Then, the procedures were replicated. The results showed that response force came under discriminative control, but force requirements had no impact on resistance to extinction. In a follow-up condition, the schedule was changed to a multiple VI 30-s VI 120-s schedule and the low-force band operated in both components. The results showed that behavior maintained by the VI 30-s schedule was generally more resistant to extinction. A secondary analysis showed that force distributions created under baseline maintained during extinction. Overall, the results suggest that differential response force requirements prevailing in steady state do not affect the course of extinction. © 2018 Society for the Experimental Analysis of Behavior.

The work of the International Laboratory of Marine Radioactivity

International Nuclear Information System (INIS)

Walton, A.

1981-01-01

It is only during the past three decades that international interest has focused on the need to manage and nurture one of our most valued resources - the oceans. In spite of this growing recognition, however, it is only during the past ten years that international agreement has been reached on the control of dumping of wastes (including nuclear wastes) at sea. The International Laboratory of Marine Radioactivity was established in 1961 well before the international agreement came into force. Indeed the Laboratory came into existence as a result of the foresight and appreciation by the International Atomic Energy Agency of the need to attack the problem of the behaviour of radioactive substances in the oceans - a subject about which little was known prior to the 1950s. With the co-operation of the Government of Monaco and the Institut Oceanographique, the Laboratory was established in 1961 in the Musee Oceanographique, Monaco. It is appropriate that the Laboratory was established in a building created by one of the most prominent pioneers in oceanography - Prince Albert 1sup(er) of Monaco. Since 1961 the programme and activities of the Monaco Laboratory have expanded and changed with the changing emphasis in pollution problems in the oceans. Throughout the many changes in emphasis which have occurred during the past 20 years, however, it is probably fair to say that the broad objectives have remained the same. The Laboratory exists therefore: to perform research on the occurrence and behaviour of radioactive substances and other forms of pollution in the marine environment; to ensure the quality of the performance and comparability of studies of radioactive substances and other forms of pollution in the marine environment by national laboratories through inter-laboratory comparisons, calibration and standardization of methodology; to assist Member States with regard to marine radioactivity and environmental problems by training personnel, establishing co

StringForce

DEFF Research Database (Denmark)

Barendregt, Wolmet; Börjesson, Peter; Eriksson, Eva

2017-01-01

In this paper, we present the forced collaborative interaction game StringForce. StringForce is developed for a special education context to support training of collaboration skills, using readily available technologies and avoiding the creation of a "mobile bubble". In order to play String......Force two or four physically collocated tablets are required. These tablets are connected to form one large shared game area. The game can only be played by collaborating. StringForce extends previous work, both technologically and regarding social-emotional training. We believe String......Force to be an interesting demo for the IDC community, as it intertwines several relevant research fields, such as mobile interaction and collaborative gaming in the special education context....

VNTR diversity in Yersinia pestis isolates from an animal challenge study reveals the potential for in vitro mutations during laboratory cultivation

Science.gov (United States)

Vogler, Amy J.; Nottingham, Roxanne; Busch, Joseph D.; Sahl, Jason W.; Shuey, Megan M.; Foster, Jeffrey T.; Schupp, James M.; Smith, Susan; Rocke, Tonie E.; Klein, Paul; Wagner, David M.

2016-01-01

Underlying mutation rates and other evolutionary forces shape the population structure of bacteria in nature. Although easily overlooked, similar forces are at work in the laboratory and may influence observed mutations. Here, we investigated tissue samples and Yersinia pestis isolates from a rodent laboratory challenge with strain CO92 using whole genome sequencing and multi-locus variable-number tandem repeat (VNTR) analysis (MLVA). We identified six VNTR mutations that were found to have occurred in vitro during laboratory cultivation rather than in vivo during the rodent challenge. In contrast, no single nucleotide polymorphism (SNP) mutations were observed, either in vivo or in vitro. These results were consistent with previously published mutation rates and the calculated number of Y. pestis generations that occurred during the in vitro versus the in vivo portions of the experiment. When genotyping disease outbreaks, the potential for in vitro mutations should be considered, particularly when highly variable genetic markers such as VNTRs are used.

The changing face of hemostasis testing in modern laboratories: consolidation, automation, and beyond.

Science.gov (United States)

Lippi, Giuseppe; Plebani, Mario; Favaloro, Emmanuel J

2015-04-01

The reality of laboratory diagnostics as a whole, and hemostasis testing in particular, is evolving under new paradigms of efficiency. The driving forces of health care and laboratory diagnostics in the third millennium are mainly represented by macro- and microeconomics. In a world with limited resources, shattered by an unprecedented economic crisis, laboratory diagnostics is undergoing a substantial reorganization, with emergence of new models under the imperative of terms, such as bedside testing, consolidation, and networking. The paradigms under which these changes are being developed include a variety of environment, preanalytical, technological, professional, and health-care aspects. The maintenance of continued quality is indeed the major challenge to be faced in the foreseeable future. In fact, some challenges prepotently emerge during a consolidation process, which basically involve delayed testing, centrifugation, transportation, and stability of the specimens, as well as the potential mismatch of sample matrix. This article is aimed to provide an overview of the current economic scenario of laboratory diagnostics and discuss the changing face of hemostasis testing in modern laboratories, providing a synthetic overview about potential drawbacks of actualized solutions. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

DarkLight: A Search for Dark Forces at the Jefferson Laboratory Free-Electron Laser Facility

Energy Technology Data Exchange (ETDEWEB)

Balewski, Jan; Bernauer, J; Bertozzi, William; Bessuille, Jason; Buck, B; Cowan, Ray; Dow, K; Epstein, C; Fisher, Peter; Gilad, Shalev; Ihloff, Ernest; Kahn, Yonatan; Kelleher, Aidan; Kelsey, J; Milner, Richard; Moran, C; Ou, Longwu; Russell, R; Schmookler, Barak; Thaler, J; Tschalar, C; Vidal, Christopher; Winnebeck, A; Benson, Stephen [JLAB; Gould, Christopher [JLAB; Biallas, George [JLAB; Boyce, James [JLAB; Coleman, James [JLAB; Douglas, David [JLAB; Ent, Rolf [JLAB; Evtushenko, Pavel [JLAB; Fenker, Howard [JLAB; Gubeli, Joseph [JLAB; Hannon, Fay [JLAB; Huang, Jia [JLAB; Jordan, Kevin [JLAB; Legg, Robert [JLAB; Marchlik, Matthew [JLAB; Moore, Steven [JLAB; Neil, George [JLAB; Shinn, Michelle D [JLAB; Tennant, Christopher [JLAB; Walker, Richard [JLAB; Williams, Gwyn [JLAB; Zhang, Shukui [JLAB; Freytsis, M; Fiorito, Ralph; O' Shea, P; Alarcon, Ricardo; Dipert, R; Ovanesyan, G; Gunter, Thoth; Kalantarians, Narbe; Kohl, M; Albayrak, Ibrahim; Horn, Tanja; Gunarathne, D S; Martoff, C J; Olvitt, D L; Surrow, Bernd; Lia, X; Beck, Reinhard; Schmitz, R; Walther, D; Brinkmann, K; Zaunig, H

2014-05-01

We give a short overview of the DarkLight detector concept which is designed to search for a heavy photon A' with a mass in the range 10 MeV/c^2 < m(A') < 90 MeV/c^2 and which decays to lepton pairs. We describe the intended operating environment, the Jefferson Laboratory free electon laser, and a way to extend DarkLight's reach using A' --> invisible decays.

On the possibility of measuring the Earth's gravitomagnetic force in a new laboratory experiment

International Nuclear Information System (INIS)

Iorio, Lorenzo

2003-01-01

In this letter we propose, in a preliminary way, a new Earth-based laboratory experiment aimed at the detection of the gravitomagnetic field of the Earth. It consists of the measurement of the difference between the circular frequencies of two rotators moving along identical circular paths, but in opposite directions, on a horizontal friction-free plane in a vacuum chamber placed at the South Pole. The accuracy to our knowledge of the Earth's rotation from VLBI and the possibility of measuring the rotators' periods over many revolutions should allow for the feasibility of the proposed experiment. (letter to the editor)

Dispersion Forces

CERN Document Server

Buhmann, Stefan Yoshi

2012-01-01

In this book, a modern unified theory of dispersion forces on atoms and bodies is presented which covers a broad range of advanced aspects and scenarios. Macroscopic quantum electrodynamics is shown to provide a powerful framework for dispersion forces which allows for discussing general properties like their non-additivity and the relation between microscopic and macroscopic interactions. It is demonstrated how the general results can be used to obtain dispersion forces on atoms in the presence of bodies of various shapes and materials. Starting with a brief recapitulation of volume I, this volume II deals especially with bodies of irregular shapes, universal scaling laws, dynamical forces on excited atoms, enhanced forces in cavity quantum electrodynamics, non-equilibrium forces in thermal environments and quantum friction. The book gives both the specialist and those new to the field a thorough overview over recent results in the field. It provides a toolbox for studying dispersion forces in various contex...

Introduction to plasma physics with space, laboratory and astrophysical applications

CERN Document Server

Gurnett, Donald A

2017-01-01

Introducing basic principles of plasma physics and their applications to space, laboratory and astrophysical plasmas, this new edition provides updated material throughout. Topics covered include single-particle motions, kinetic theory, magnetohydrodynamics, small amplitude waves in hot and cold plasmas, and collisional effects. New additions include the ponderomotive force, tearing instabilities in resistive plasmas and the magnetorotational instability in accretion disks, charged particle acceleration by shocks, and a more in-depth look at nonlinear phenomena. A broad range of applications are explored: planetary magnetospheres and radiation belts, the confinement and stability of plasmas in fusion devices, the propagation of discontinuities and shock waves in the solar wind, and analysis of various types of plasma waves and instabilities that can occur in planetary magnetospheres and laboratory plasma devices. With step-by-step derivations and self-contained introductions to mathematical methods, this book...

The current status of radiopharmacy laboratories in Turkey, conveniences to good radiopharmacy practice (GRP) and quality management systems (ISO)

International Nuclear Information System (INIS)

Atak, I.E.

2004-01-01

This study ha been conducted in the Radiopharmacy Laboratories of Nuclear Medicine departments of various hospitals and private nuclear medicine laboratories. A total of 35 laboratories from 7 regions of Turkey have been selected by layered sampling method from 131 Radiopharmacy Laboratories located in 30 different cities. During the study, a GRP investigation list with 67 questions and direct communication technique have been used. The aim was determine the current status of the Radiopharmacy Laboratories in general and the administration of radiopharmaceuticals on patients, and good practices in radiopharmacy and conformance with quality assurance systems. In this respect, questions have been asked to determine a) General status, b) Information level of lab workers regarding to the GRP and ISO concepts (i-Status of lab managers, ii- Responsibilities and knowledge of lab workers and iii- regarding to GRP and ISO-9000), c) Conditions of infrastructure, and lab services and its quality, d) Status of organizations. Results showed that only two of the 35 managers of laboratories were radiopharmacists, the rest were Nuclear Medicine specialists. There were less knowledge on GRP than ISO, the labs holding ISO certificate were in minority even though ISO is known concept, radiopharmacist were more knowledgeable in GRP while nuclear medicine specialists were in ISO, the labs with better GRP knowledge have better infrastructure, the GRP knowledge were better in the university and armed forces hospitals while ISO knowledge and certificates were more in private labs and hospitals, the armed forces hospitals better paraphernalia, practically almost all radiopharmaceutical kits were imported goods and there were important problems in quality control

An exciting experiment for pre-engineering and introductory physics students: creating a DC motor using the Lorentz force

International Nuclear Information System (INIS)

Abdul-Razzaq, Wathiq N; Boehm, Manfred H; Bushey, Ryan K

2008-01-01

Introductory physics laboratories have been demonstrated in some instances to be difficult or uninteresting to students at the collegiate level. We have developed a laboratory that introduces the concept of the Lorentz force and allows students to build a non-traditional DC motor out of easily acquired materials. Basic electricity and magnetism concepts are joined together in a simple and enjoyable experiment that allows the students to demonstrate physics at first hand and without the use of complex materials

Status Report on Activities of the Systems Assessment Task Force, OECD-NEA Expert Group on Accident Tolerant Fuels for LWRs

Energy Technology Data Exchange (ETDEWEB)

Bragg-Sitton, Shannon Michelle [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2016-09-01

The Organization for Economic Cooperation and Development /Nuclear Energy Agency (OECD/NEA) Nuclear Science Committee approved the formation of an Expert Group on Accident Tolerant Fuel (ATF) for LWRs (EGATFL) in 2014. Chaired by Kemal Pasamehmetoglu, INL Associate Laboratory Director for Nuclear Science and Technology, the mandate for the EGATFL defines work under three task forces: (1) Systems Assessment, (2) Cladding and Core Materials, and (3) Fuel Concepts. Scope for the Systems Assessment task force (TF1) includes definition of evaluation metrics for ATF, technology readiness level definition, definition of illustrative scenarios for ATF evaluation, and identification of fuel performance and system codes applicable to ATF evaluation. The Cladding and Core Materials (TF2) and Fuel Concepts (TF3) task forces will identify gaps and needs for modeling and experimental demonstration; define key properties of interest; identify the data necessary to perform concept evaluation under normal conditions and illustrative scenarios; identify available infrastructure (internationally) to support experimental needs; and make recommendations on priorities. Where possible, considering proprietary and other export restrictions (e.g., International Traffic in Arms Regulations), the Expert Group will facilitate the sharing of data and lessons learned across the international group membership. The Systems Assessment task force is chaired by Shannon Bragg-Sitton (Idaho National Laboratory [INL], U.S.), the Cladding Task Force is chaired by Marie Moatti (Electricite de France [EdF], France), and the Fuels Task Force is chaired by a Masaki Kurata (Japan Atomic Energy Agency [JAEA], Japan). The original Expert Group mandate was established for June 2014 to June 2016. In April 2016 the Expert Group voted to extend the mandate one additional year to June 2017 in order to complete the task force deliverables; this request was subsequently approved by the Nuclear Science Committee. This

Status Report on Activities of the Systems Assessment Task Force, OECD-NEA Expert Group on Accident Tolerant Fuels for LWRs

International Nuclear Information System (INIS)

Bragg-Sitton, Shannon Michelle

2016-01-01

The Organization for Economic Cooperation and Development /Nuclear Energy Agency (OECD/NEA) Nuclear Science Committee approved the formation of an Expert Group on Accident Tolerant Fuel (ATF) for LWRs (EGATFL) in 2014. Chaired by Kemal Pasamehmetoglu, INL Associate Laboratory Director for Nuclear Science and Technology, the mandate for the EGATFL defines work under three task forces: (1) Systems Assessment, (2) Cladding and Core Materials, and (3) Fuel Concepts. Scope for the Systems Assessment task force (TF1) includes definition of evaluation metrics for ATF, technology readiness level definition, definition of illustrative scenarios for ATF evaluation, and identification of fuel performance and system codes applicable to ATF evaluation. The Cladding and Core Materials (TF2) and Fuel Concepts (TF3) task forces will identify gaps and needs for modeling and experimental demonstration; define key properties of interest; identify the data necessary to perform concept evaluation under normal conditions and illustrative scenarios; identify available infrastructure (internationally) to support experimental needs; and make recommendations on priorities. Where possible, considering proprietary and other export restrictions (e.g., International Traffic in Arms Regulations), the Expert Group will facilitate the sharing of data and lessons learned across the international group membership. The Systems Assessment task force is chaired by Shannon Bragg-Sitton (Idaho National Laboratory [INL], U.S.), the Cladding Task Force is chaired by Marie Moatti (Electricite de France [EdF], France), and the Fuels Task Force is chaired by a Masaki Kurata (Japan Atomic Energy Agency [JAEA], Japan). The original Expert Group mandate was established for June 2014 to June 2016. In April 2016 the Expert Group voted to extend the mandate one additional year to June 2017 in order to complete the task force deliverables; this request was subsequently approved by the Nuclear Science Committee. This

Preliminary analysis of force-torque measurements for robot-assisted fracture surgery.

Science.gov (United States)

Georgilas, Ioannis; Dagnino, Giulio; Tarassoli, Payam; Atkins, Roger; Dogramadzi, Sanja

2015-08-01

Our group at Bristol Robotics Laboratory has been working on a new robotic system for fracture surgery that has been previously reported [1]. The robotic system is being developed for distal femur fractures and features a robot that manipulates the small fracture fragments through small percutaneous incisions and a robot that re-aligns the long bones. The robots controller design relies on accurate and bounded force and position parameters for which we require real surgical data. This paper reports preliminary findings of forces and torques applied during bone and soft tissue manipulation in typical orthopaedic surgery procedures. Using customised orthopaedic surgical tools we have collected data from a range of orthopaedic surgical procedures at Bristol Royal Infirmary, UK. Maximum forces and torques encountered during fracture manipulation which involved proximal femur and soft tissue distraction around it and reduction of neck of femur fractures have been recorded and further analysed in conjunction with accompanying image recordings. Using this data we are establishing a set of technical requirements for creating safe and dynamically stable minimally invasive robot-assisted fracture surgery (RAFS) systems.

Final Environmental Assessment for the First Air Force Air Operations Center, First Air Force Headquarters/Air Force Forces Center, and Highway 98 Overpass at Tyndall Air Force Base, Florida

Science.gov (United States)

2004-01-01

no comments regarding the Draft Environmental Assessment for the First Air Force Operations Center, First Air Force Headquarters/Air Force Forces...COUNCIL ] No Comment BAY - BAY COUNTY No Final Comments Received ENVIRONMENTAL POLICY UNIT - OFFICE OF POLICY AND BUDGET, ENVIRONMENTAL POLICY UNIT NO ...CONSERVATION COMMISSION [ NO COMMENT BY BRIAN BARNETT ON 4/12/04. [STATE - FLORIDA DEPARTMENT OF STATE [ No Comment [TRANSPORTATION - FLORIDA DEPARTMENT

Supplemental site inspection for Air Force Plant 59, Johnson City, New York, Volume 3: Appendices F-Q

Energy Technology Data Exchange (ETDEWEB)

Nashold, B.; Rosenblatt, D.; Hau, J. [and others

1995-08-01

This summary describes a Supplemental Site Inspection (SSI) conducted by Argonne National Laboratory (ANL) at Air Force Plant 59 (AFP 59) in Johnson City, New York. All required data pertaining to this project were entered by ANL into the Air Force-wide Installation Restoration Program Information System (IRPIMS) computer format and submitted to an appropriate authority. The work was sponsored by the United States Air Force as part of its Installation Restoration Program (IRP). Previous studies had revealed the presence of contaminants at the site and identified several potential contaminant sources. Argonne`s study was conducted to answer questions raised by earlier investigations. This volume consists of appendices F-Q, which contain the analytical data from the site characterization.

C-130J Breathing Resistance Study

Science.gov (United States)

2016-05-01

scientific and technical information exchange , and its publication does not constitute the Government’s approval or disapproval of its ideas or findings...regulator and MBU- 20/P oxygen mask, was supplied gaseous Aviators’ Breathing Oxygen (ABO). The regulator was operated in various operating modes, at...Generating System (OBOGS) Laboratory, Area B, Wright-Patterson AFB OH. The CRU-73 oxygen regulator was supplied with 50 pounds/square inch of gaseous

Changes in gluteal muscle forces with alteration of footstrike pattern during running.

Science.gov (United States)

Vannatta, Charles Nathan; Kernozek, Thomas W; Gheidi, Naghmeh

2017-10-01

Gait retraining is a common form of treatment for running related injuries. Proximal factors at the hip have been postulated as having a role in the development of running related injuries. How altering footstrike affects hip muscles forces and kinematics has not been described. Thus, we aimed to quantify differences in hip muscle forces and hip kinematics that may occur when healthy runners are instructed to alter their foot strike pattern from their habitual rear-foot strike to a forefoot strike. This may gain insight on the potential etiology and treatment methods of running related lower extremity injury. Twenty-five healthy female runners completed a minimum of 10 running trials in a controlled laboratory setting under rear-foot strike and instructed forefoot strike conditions. Kinetic and kinematic data were used in an inverse dynamic based static optimization to estimate individual muscle forces during running. Within subject differences were investigated using a repeated measures multi-variate analysis of variance. Peak gluteus medius and minimus and hamstring forces were reduced while peak gluteus maximus force was increased when running with an instructed forefoot strike pattern. Peak hip adduction, hip internal rotation, and heel-COM distance were also reduced. Therefore, instructing habitual rearfoot strike runners to run with a forefoot strike pattern resulted in changes in peak gluteal and hamstring muscle forces and hip kinematics. These changes may be beneficial to the development and treatment of running related lower extremity injury. Copyright © 2017 Elsevier B.V. All rights reserved.

Beamed Energy Propulsion by Means of Target Ablation

International Nuclear Information System (INIS)

Rosenberg, Benjamin A.

2004-01-01

This paper describes hundreds of pendulum tests examining the beamed energy conversion efficiency of different metal targets coated with multiple liquid enhancers. Preliminary testing used a local laser with photographic paper targets, with no liquid, water, canola oil, or methanol additives. Laboratory experimentation was completed at Wright-Patterson AFB using a high-powered laser, and ballistic pendulums of aluminum, titanium, or copper. Dry targets, and those coated with water, methanol and oil were repeatedly tested in laboratory conditions. Results were recorded on several high-speed digital video cameras, and the conversion efficiency was calculated. Paper airplanes successfully launched using BEP were likewise recorded

Damage Tolerant Repair Techniques for Pressurized Aircraft Fuselages

Science.gov (United States)

1994-01-01

RepoW Techniques for Prwurized Aircraft AXWdOg 4.9 Summary and Conclusions The basics of adhesive bonded repairs for aluminum aircraft fuselages have... of cruise altitude and bending stresses in the plate at the tip of one-sided reinforcements (chapter 5). The expanded Rose model was transformed into a...DEPARTMEN1 OF THE AIR FORCE AGENCY REPORT NUMBER AFIT/CI 2950 P STREET WRIGHT-PATTERSON AFB OH 45433-7765 11. SUPPLEMENTARY NOTES Usa. DISTRUISUIOII

A Focused Fundamental Study of Predicting Materials Degradation & Fatigue. Volume 1

Science.gov (United States)

1997-05-31

Eisentraut U.S. Air Force Thomas Faegg Thomas Optical Mike Foley Norton Company Kathleen Havey Wright Lab Bill Mandler Enceratec Karl Mecklenburg U.S. Air...F. Riley (ed.). Nitrogen Ceramics, Noordhoff, Leyden , release rate obtained is greater than or equal to its critical Netherlands, 1977, pp. 109-128...Noordhoff, Leyden , Netherlands, 1977, pp. 265-288. node will then be relaxed into two nodes and crack extension [5] D. Richerson, Am. Ceram. Soc. Bull

KC-46A Tanker Modernization (KC-46A)

Science.gov (United States)

2015-12-01

Program Startup Workshop with the assistance from Defense Acquisition University at Wright-Patterson Air Force Base, Ohio. July 8 - 10, 2013: The KC-46A...Selected Acquisition Report (SAR) RCS: DD-A&T(Q&A)823-387 KC-46A Tanker Modernization (KC-46A) As of FY 2017 President’s Budget Defense Acquisition ...Deliveries and Expenditures 48 Operating and Support Cost 49 Common Acronyms and Abbreviations for MDAP Programs Acq O&M - Acquisition

A Wind Tunnel Investigation of Joined Wing Scissor Morphing

Science.gov (United States)

2006-06-01

would use the low sweep for carrier landing and subsonic cruise, and use the high sweep for 12 supersonic flight [13]. According to Raymer [19...Wright-Patterson AFB, Ohio: Air Force Institute of Technology, 2005. 12. Katz, Joseph, Shaun Byrne, and Robert Hahl. "Stall Resistance Features of...Lifting-Body Airplane Configurations." Journal of Aircraft 2nd ser. 36 (1999): 471-474. 13. Kress, Robert W. "Variable Sweep Wing Design." AIAA 83

Study of the Permeability of Foam Conditioned Soils with Laboratory Tests

OpenAIRE

Borio, Luca; Peila, Daniele

2010-01-01

Problem statement: EPB tunneling requires that the excavated soil has a plastic and pulpy behavior to be able to apply a stabilizing pressure to the face, but it should also be impervious to counteract filtration forces that could develop ahead of the face. The evaluation of this parameter in granular soil, before and after conditioning, is therefore of key importance for a correct conditioning agents choice. Approach: A new laboratory procedure for testing the permeability of conditioned soi...

Accuracy of force and center of pressure measures of the Wii Balance Board.

Science.gov (United States)

Bartlett, Harrison L; Ting, Lena H; Bingham, Jeffrey T

2014-01-01

The Nintendo Wii Balance Board (WBB) is increasingly used as an inexpensive force plate for assessment of postural control; however, no documentation of force and COP accuracy and reliability is publicly available. Therefore, we performed a standard measurement uncertainty analysis on 3 lightly and 6 heavily used WBBs to provide future users with information about the repeatability and accuracy of the WBB force and COP measurements. Across WBBs, we found the total uncertainty of force measurements to be within ± 9.1N, and of COP location within ± 4.1mm. However, repeatability of a single measurement within a board was better (4.5 N, 1.5mm), suggesting that the WBB is best used for relative measures using the same device, rather than absolute measurement across devices. Internally stored calibration values were comparable to those determined experimentally. Further, heavy wear did not significantly degrade performance. In combination with prior evaluation of WBB performance and published standards for measuring human balance, our study provides necessary information to evaluate the use of the WBB for analysis of human balance control. We suggest the WBB may be useful for low-resolution measurements, but should not be considered as a replacement for laboratory-grade force plates. Published by Elsevier B.V.

Estimating Fault Friction From Seismic Signals in the Laboratory

Science.gov (United States)

Rouet-Leduc, Bertrand; Hulbert, Claudia; Bolton, David C.; Ren, Christopher X.; Riviere, Jacques; Marone, Chris; Guyer, Robert A.; Johnson, Paul A.

2018-02-01

Nearly all aspects of earthquake rupture are controlled by the friction along the fault that progressively increases with tectonic forcing but in general cannot be directly measured. We show that fault friction can be determined at any time, from the continuous seismic signal. In a classic laboratory experiment of repeating earthquakes, we find that the seismic signal follows a specific pattern with respect to fault friction, allowing us to determine the fault's position within its failure cycle. Using machine learning, we show that instantaneous statistical characteristics of the seismic signal are a fingerprint of the fault zone shear stress and frictional state. Further analysis of this fingerprint leads to a simple equation of state quantitatively relating the seismic signal power and the friction on the fault. These results show that fault zone frictional characteristics and the state of stress in the surroundings of the fault can be inferred from seismic waves, at least in the laboratory.

Laboratory test for ice adhesion strength using commercial instrumentation.

Science.gov (United States)

Wang, Chenyu; Zhang, Wei; Siva, Adarsh; Tiea, Daniel; Wynne, Kenneth J

2014-01-21

A laboratory test method for evaluating ice adhesion has been developed employing a commercially available instrument normally used for dynamic mechanical analysis (TA RSA-III). This is the first laboratory ice adhesion test that does not require a custom-built apparatus. The upper grip range of ∼10 mm is an enabling feature that is essential for the test. The method involves removal of an ice cylinder from a polymer coating with a probe and the determination of peak removal force (Ps). To validate the test method, the strength of ice adhesion was determined for a prototypical glassy polymer, poly(methyl methacrylate). The distance of the probe from the PMMA surface has been identified as a critical variable for Ps. The new test provides a readily available platform for investigating fundamental surface characteristics affecting ice adhesion. In addition to the ice release test, PMMA coatings were characterized using DSC, DCA, and TM-AFM.

Rigid two-axis MEMS force plate for measuring cellular traction force

International Nuclear Information System (INIS)

Takahashi, Hidetoshi; Jung, Uijin G; Shimoyama, Isao; Kan, Tetsuo; Tsukagoshi, Takuya; Matsumoto, Kiyoshi

2016-01-01

Cellular traction force is one of the important factors for understanding cell behaviors, such as spreading, migration and differentiation. Cells are known to change their behavior according to the mechanical stiffness of the environment. However, the measurement of cell traction forces on a rigid environment has remained difficult. This paper reports a micro-electromechanical systems (MEMS) force plate that provides a cellular traction force measurement on a rigid substrate. Both the high force sensitivity and high stiffness of the substrate were obtained using piezoresistive sensing elements. The proposed force plate consists of a 70 µ m  ×  15 µ m  ×  5 µ m base as the substrate for cultivating a bovine aortic smooth muscle cell, and the supporting beams with piezoresistors on the sidewall and the surface were used to measure the forces in both the horizontal and vertical directions. The spring constant and force resolution of the fabricated force plate in the horizontal direction were 0.2 N m −1 and less than 0.05 µ N, respectively. The cell traction force was measured, and the traction force increased by approximately 1 µ N over 30 min. These results demonstrate that the proposed force plate is applicable as an effective traction force measurement. (paper)

Automated force controller for amplitude modulation atomic force microscopy

Energy Technology Data Exchange (ETDEWEB)

Miyagi, Atsushi, E-mail: atsushi.miyagi@inserm.fr, E-mail: simon.scheuring@inserm.fr; Scheuring, Simon, E-mail: atsushi.miyagi@inserm.fr, E-mail: simon.scheuring@inserm.fr [U1006 INSERM, Université Aix-Marseille, Parc Scientifique et Technologique de Luminy, 163 Avenue de Luminy, 13009 Marseille (France)

2016-05-15

Atomic Force Microscopy (AFM) is widely used in physics, chemistry, and biology to analyze the topography of a sample at nanometer resolution. Controlling precisely the force applied by the AFM tip to the sample is a prerequisite for faithful and reproducible imaging. In amplitude modulation (oscillating) mode AFM, the applied force depends on the free and the setpoint amplitudes of the cantilever oscillation. Therefore, for keeping the applied force constant, not only the setpoint amplitude but also the free amplitude must be kept constant. While the AFM user defines the setpoint amplitude, the free amplitude is typically subject to uncontrollable drift, and hence, unfortunately, the real applied force is permanently drifting during an experiment. This is particularly harmful in biological sciences where increased force destroys the soft biological matter. Here, we have developed a strategy and an electronic circuit that analyzes permanently the free amplitude of oscillation and readjusts the excitation to maintain the free amplitude constant. As a consequence, the real applied force is permanently and automatically controlled with picoNewton precision. With this circuit associated to a high-speed AFM, we illustrate the power of the development through imaging over long-duration and at various forces. The development is applicable for all AFMs and will widen the applicability of AFM to a larger range of samples and to a larger range of (non-specialist) users. Furthermore, from controlled force imaging experiments, the interaction strength between biomolecules can be analyzed.

Imaging stability in force-feedback high-speed atomic force microscopy

International Nuclear Information System (INIS)

Kim, Byung I.; Boehm, Ryan D.

2013-01-01

We studied the stability of force-feedback high-speed atomic force microscopy (HSAFM) by imaging soft, hard, and biological sample surfaces at various applied forces. The HSAFM images showed sudden topographic variations of streaky fringes with a negative applied force when collected on a soft hydrocarbon film grown on a grating sample, whereas they showed stable topographic features with positive applied forces. The instability of HSAFM images with the negative applied force was explained by the transition between contact and noncontact regimes in the force–distance curve. When the grating surface was cleaned, and thus hydrophilic by removing the hydrocarbon film, enhanced imaging stability was observed at both positive and negative applied forces. The higher adhesive interaction between the tip and the surface explains the improved imaging stability. The effects of imaging rate on the imaging stability were tested on an even softer adhesive Escherichia coli biofilm deposited onto the grating structure. The biofilm and planktonic cell structures in HSAFM images were reproducible within the force deviation less than ∼0.5 nN at the imaging rate up to 0.2 s per frame, suggesting that the force-feedback HSAFM was stable for various imaging speeds in imaging softer adhesive biological samples. - Highlights: ► We investigated the imaging stability of force-feedback HSAFM. ► Stable–unstable imaging transitions rely on applied force and sample hydrophilicity. ► The stable–unstable transitions are found to be independent of imaging rate

From Serpent to CEO: Improving First-Term Security Forces Airman Performance Through Neuroscience Education

Science.gov (United States)

2017-06-09

support procedures and decision - making processes. Creating awareness that limitations are present creates a natural motivation to want to reduce...law enforcement decision - making ? What cultural norms within Security Forces should be challenged to improve responses of young adults faced with...enforcement and combat decision - making processes is available. However, it is not uncommon for laboratory discoveries to enter clinical practice, not to

A compilation of minutes for the Stripa task force on fracture flow modelling

International Nuclear Information System (INIS)

Hodgkinson, D.

1992-01-01

This report is a compilation of minutes from the nine meetings of the Stripa task force on fracture flow modelling, held at various locations around the world from February 1988 to December 1991. The task force was set up as a peer review group with the specific objectives of 1. recommending criteria for the verification and validation of fracture flow models, 2. facilitating the dissemination of information to countries participating in the Stripa project, and 3. coordinating the work of the three modelling groups form AEA Harwell, Golder Associates and Lawrence Berkeley Laboratory. The report provides a detailed technical commentary of the interplay between the development and application of mathematical models, and the design, execution and interpretation of experiment, within a structured project management framework. In particular, the task force has pioneered the definition and implementation of a validation process and associated criteria based on the analysis of a wide range of experimental data. (au)

Oak Ridge National Laboratory Waste Management Plan

International Nuclear Information System (INIS)

1991-12-01

The goal of the Oak Ridge National Laboratory (ORNL) Waste Management Program is the protection of workers, the public, and the environment. A vital aspect of this goal is to comply with all applicable state, federal, and DOE requirements. Waste management requirements for DOE radioactive wastes are detailed in DOE Order 5820.2A, and the ORNL Waste Management Program encompasses all elements of this order. The requirements of this DOE order and other appropriate DOE orders, along with applicable Tennessee Department of Environment and Conservation (TDEC) and US Environmental Protection Agency (EPA) rules and regulations, provide the principal source of regulatory guidance for waste management operations at ORNL. The objective of the Oak Ridge National Laboratory Waste Management Plan is to compile and to consolidate information annually on how the ORNL Waste Management is to compile and to consolidate information annually on how the ORNL Waste Management Program is conducted, which waste management facilities are being used to manage wastes, what forces are acting to change current waste management systems, what activities are planned for the forthcoming fiscal year (FY), and how all of the activities are documented

Principles and applications of force spectroscopy using atomic force microscopy

Energy Technology Data Exchange (ETDEWEB)

Kim, Young Kyu; Kim, Woong; Park, Joon Won [Dept. of Chemistry, Pohang University of Science and Technology, Pohang (Korea, Republic of)

2016-12-15

Single-molecule force spectroscopy is a powerful technique for addressing single molecules. Unseen structures and dynamics of molecules have been elucidated using force spectroscopy. Atomic force microscope (AFM)-based force spectroscopy studies have provided picoNewton force resolution, subnanometer spatial resolution, stiffness of substrates, elasticity of polymers, and thermodynamics and kinetics of single-molecular interactions. In addition, AFM has enabled mapping the distribution of individual molecules in situ, and the quantification of single molecules has been made possible without modification or labeling. In this review, we describe the basic principles, sample preparation, data analysis, and applications of AFM-based force spectroscopy and its future.

Three-nucleon forces

International Nuclear Information System (INIS)

Sauer, P.U.

2014-01-01

In this paper, the role of three-nucleon forces in ab initio calculations of nuclear systems is investigated. The difference between genuine and induced many-nucleon forces is emphasized. Induced forces arise in the process of solving the nuclear many-body problem as technical intermediaries toward calculationally converged results. Genuine forces make up the Hamiltonian. They represent the chosen underlying dynamics. The hierarchy of contributions arising from genuine two-, three- and many-nucleon forces is discussed. Signals for the need of the inclusion of genuine three-nucleon forces are studied in nuclear systems, technically best under control, especially in three-nucleon and four-nucleon systems. Genuine three-nucleon forces are important for details in the description of some observables. Their contributions to observables are small on the scale set by two-nucleon forces. (author)

A Modernized UDM-600 Dynamometer-Based Setup for the Cutting Force Measurement

Directory of Open Access Journals (Sweden)

Ya. I. Shuliak

2016-01-01

Full Text Available The article considers development of a modernized UDM-600 dynamometer-based setup for measuring the cutting force components. Modernization of existing equipment to improve the method of recording the cutting force components in the automated mode is of relevance. The measuring setup allows recording the cutting force components in turning and milling, as well as the axial force and the torque in the drilling and milling operations.The article presents a block diagram and a schematic diagram of the setup to measure the cutting force components, and describes a basic principle of measuring units within the modernized setup. The developed setup uses a half-bridge strain gauge measuring circuit to record the cutting forces. To enhance the measuring circuit output voltage is used a 16-channel amplifier of LA-UN16 model with a discretely adjustable gain. To record and process electrical signals is used a data acquisition device of NI USB-6009 model, which enables transmitting the received data to a PC via USB-interface. The data acquisition device has a built-in stabilized DC power supply that is used to power the strain gauge bridges. A developed schematic diagram of the measuring setup allows us to realize this measuring device and implement its modernization.Final processing of recorded data is provided through the software developed in visual programming environment LabVIEW 9.0. The program allows us to show the real-time measuring values of the cutting force components graphically and to record the taken data to a text file.The measuring setup modernization enabled increasing measurement accuracy and reducing time for processing and analysis of experimental data obtained when measuring the cutting force components. The MT2 Department of BMSTU uses it in education and research activities and in experimental efforts and laboratory classes.

Uncertainties in forces extracted from non-contact atomic force microscopy measurements by fitting of long-range background forces

Directory of Open Access Journals (Sweden)

Adam Sweetman

2014-04-01

Full Text Available In principle, non-contact atomic force microscopy (NC-AFM now readily allows for the measurement of forces with sub-nanonewton precision on the atomic scale. In practice, however, the extraction of the often desired ‘short-range’ force from the experimental observable (frequency shift is often far from trivial. In most cases there is a significant contribution to the total tip–sample force due to non-site-specific van der Waals and electrostatic forces. Typically, the contribution from these forces must be removed before the results of the experiment can be successfully interpreted, often by comparison to density functional theory calculations. In this paper we compare the ‘on-minus-off’ method for extracting site-specific forces to a commonly used extrapolation method modelling the long-range forces using a simple power law. By examining the behaviour of the fitting method in the case of two radically different interaction potentials we show that significant uncertainties in the final extracted forces may result from use of the extrapolation method.

Biomechanically determined hand force limits protecting the low back during occupational pushing and pulling tasks.

Science.gov (United States)

Weston, Eric B; Aurand, Alexander; Dufour, Jonathan S; Knapik, Gregory G; Marras, William S

2018-06-01

Though biomechanically determined guidelines exist for lifting, existing recommendations for pushing and pulling were developed using a psychophysical approach. The current study aimed to establish objective hand force limits based on the results of a biomechanical assessment of the forces on the lumbar spine during occupational pushing and pulling activities. Sixty-two subjects performed pushing and pulling tasks in a laboratory setting. An electromyography-assisted biomechanical model estimated spinal loads, while hand force and turning torque were measured via hand transducers. Mixed modelling techniques correlated spinal load with hand force or torque throughout a wide range of exposures in order to develop biomechanically determined hand force and torque limits. Exertion type, exertion direction, handle height and their interactions significantly influenced dependent measures of spinal load, hand force and turning torque. The biomechanically determined guidelines presented herein are up to 30% lower than comparable psychophysically derived limits and particularly more protective for straight pushing. Practitioner Summary: This study utilises a biomechanical model to develop objective biomechanically determined push/pull risk limits assessed via hand forces and turning torque. These limits can be up to 30% lower than existing psychophysically determined pushing and pulling recommendations. Practitioners should consider implementing these guidelines in both risk assessment and workplace design moving forward.

Force modulation for improved conductive-mode atomic force microscopy

NARCIS (Netherlands)

Koelmans, W.W.; Sebastian, Abu; Despont, Michel; Pozidis, Haris

We present an improved conductive-mode atomic force microscopy (C-AFM) method by modulating the applied loading force on the tip. Unreliable electrical contact and tip wear are the primary challenges for electrical characterization at the nanometer scale. The experiments show that force modulation

Comparison of the inertial properties and forces required to initiate movement for three gait trainers.

Science.gov (United States)

Paleg, Ginny; Huang, Morris; Vasquez Gabela, Stephanie C; Sprigle, Stephen; Livingstone, Roslyn

2016-01-01

The purpose of this study was to evaluate the inertial properties and forces required to initiate movement on two different surfaces in a sample of three commonly prescribed gait trainers. Tests were conducted in a laboratory setting to compare the Prime Engineering KidWalk, Rifton Pacer, and Snug Seat Mustang with and without a weighted anthropometric test dummy configured to the weight and proportions of a 4-year-old child. The Pacer was the lightest and the KidWalk the heaviest while footprints of the three gait trainers were similar. Weight was borne fairly evenly on the four casters of the Pacer and Mustang while 85% of the weight was borne on the large wheels of the mid-wheel drive KidWalk. These differences in frame style, wheel, and caster style and overall mass impact inertial properties and forces required to initiate movement. Test results suggest that initiation forces on tile were equivalent for the Pacer and KidWalk while the Mustang had the highest initiation force. Initiation forces on carpet were lowest for the KidWalk and highest for the Mustang. This initial study of inertia and movement initiation forces may provide added information for clinicians to consider when selecting a gait trainer for their clients.

Value of syndromic surveillance within the Armed Forces for early warning during a dengue fever outbreak in French Guiana in 2006

Directory of Open Access Journals (Sweden)

Jefferson Henry

2008-07-01

Full Text Available Abstract Background A dengue fever outbreak occured in French Guiana in 2006. The objectives were to study the value of a syndromic surveillance system set up within the armed forces, compared to the traditional clinical surveillance system during this outbreak, to highlight issues involved in comparing military and civilian surveillance systems and to discuss the interest of syndromic surveillance for public health response. Methods Military syndromic surveillance allows the surveillance of suspected dengue fever cases among the 3,000 armed forces personnel. Within the same population, clinical surveillance uses several definition criteria for dengue fever cases, depending on the epidemiological situation. Civilian laboratory surveillance allows the surveillance of biologically confirmed cases, within the 200,000 inhabitants. Results It was shown that syndromic surveillance detected the dengue fever outbreak several weeks before clinical surveillance, allowing quick and effective enhancement of vector control within the armed forces. Syndromic surveillance was also found to have detected the outbreak before civilian laboratory surveillance. Conclusion Military syndromic surveillance allowed an early warning for this outbreak to be issued, enabling a quicker public health response by the armed forces. Civilian surveillance system has since introduced syndromic surveillance as part of its surveillance strategy. This should enable quicker public health responses in the future.

Update on hidden sectors with dark forces and dark matter

Energy Technology Data Exchange (ETDEWEB)

Andreas, Sarah

2012-11-15

Recently there has been much interest in hidden sectors, especially in the context of dark matter and ''dark forces'', since they are a common feature of beyond standard model scenarios like string theory and SUSY and additionally exhibit interesting phenomenological aspects. Various laboratory experiments place limits on the so-called hidden photon and continuously further probe and constrain the parameter space; an updated overview is presented here. Furthermore, for several hidden sector models with light dark matter we study the viability with respect to the relic abundance and direct detection experiments.

Forced eye closure-induced reflex seizure and non-ketotic hyperglycemia

International Nuclear Information System (INIS)

Tiras, Raziye; Mutlu, Aytul; Ozben, Serkan; Aydemir Tuba; Ozerab, Feriha

2009-01-01

We report an uncommon case of 53-year-old female patient with partial seizure induced by forced voluntary eye closure due to non-ketotic hyperglycemia. The initial laboratory tests showed an elevated blood glucose level of 550 mg/dL but no evidence of ketosis. Brain magnetic resonance imaging was normal. When the blood glucose levels decreased slowly to about 150 mg/dL in five days, the seizures ended completely. No anticonvulsants were used. Since seizures are generally refractory to antiepileptic medication, control of blood glucose is essential. (author)

Quantum fictitious forces

DEFF Research Database (Denmark)

Bialynicki-Birula, I; Cirone, M.A.; Dahl, Jens Peder

2002-01-01

We present Heisenberg's equation of motion for the radial variable of a free non-relativistic particle in D dimensions. The resulting radial force consists of three contributions: (i) the quantum fictitious force which is either attractive or repulsive depending on the number of dimensions, (ii......) a singular quantum force located at the origin, and (iii) the centrifugal force associated with non-vanishing angular momentum. Moreover, we use Heisenberg's uncertainty relation to introduce a lower bound for the kinetic energy of an ensemble of neutral particles. This bound is quadratic in the number...... of atoms and can be traced back to the repulsive quantum fictitious potential. All three forces arise for a free particle: "Force without force"....

Dual-joint modeling for estimation of total knee replacement contact forces during locomotion.

Science.gov (United States)

Hast, Michael W; Piazza, Stephen J

2013-02-01

Model-based estimation of in vivo contact forces arising between components of a total knee replacement is challenging because such forces depend upon accurate modeling of muscles, tendons, ligaments, contact, and multibody dynamics. Here we describe an approach to solving this problem with results that are tested by comparison to knee loads measured in vivo for a single subject and made available through the Grand Challenge Competition to Predict in vivo Tibiofemoral Loads. The approach makes use of a "dual-joint" paradigm in which the knee joint is alternately represented by (1) a ball-joint knee for inverse dynamic computation of required muscle controls and (2) a 12 degree-of-freedom (DOF) knee with elastic foundation contact at the tibiofemoral and patellofemoral articulations for forward dynamic integration. Measured external forces and kinematics were applied as a feedback controller and static optimization attempted to track measured knee flexion angles and electromyographic (EMG) activity. The resulting simulations showed excellent tracking of knee flexion (average RMS error of 2.53 deg) and EMG (muscle activations within ±10% envelopes of normalized measured EMG signals). Simulated tibiofemoral contact forces agreed qualitatively with measured contact forces, but their RMS errors were approximately 25% of the peak measured values. These results demonstrate the potential of a dual-joint modeling approach to predict joint contact forces from kinesiological data measured in the motion laboratory. It is anticipated that errors in the estimation of contact force will be reduced as more accurate subject-specific models of muscles and other soft tissues are developed.

Bioassay Laboratory

Data.gov (United States)

Federal Laboratory Consortium — The Bioassay Laboratory is an accredited laboratory capable of conducting standardized and innovative environmental testing in the area of aquatic ecotoxicology. The...

HYDROMECHANICS LABORATORY

Data.gov (United States)

Federal Laboratory Consortium — Naval Academy Hydromechanics LaboratoryThe Naval Academy Hydromechanics Laboratory (NAHL) began operations in Rickover Hall in September 1976. The primary purpose of...

Moving force identification based on redundant concatenated dictionary and weighted l1-norm regularization

Science.gov (United States)

Pan, Chu-Dong; Yu, Ling; Liu, Huan-Lin; Chen, Ze-Peng; Luo, Wen-Feng

2018-01-01

Moving force identification (MFI) is an important inverse problem in the field of bridge structural health monitoring (SHM). Reasonable signal structures of moving forces are rarely considered in the existing MFI methods. Interaction forces are complex because they contain both slowly-varying harmonic and impact signals due to bridge vibration and bumps on a bridge deck, respectively. Therefore, the interaction forces are usually hard to be expressed completely and sparsely by using a single basis function set. Based on the redundant concatenated dictionary and weighted l1-norm regularization method, a hybrid method is proposed for MFI in this study. The redundant dictionary consists of both trigonometric functions and rectangular functions used for matching the harmonic and impact signal features of unknown moving forces. The weighted l1-norm regularization method is introduced for formulation of MFI equation, so that the signal features of moving forces can be accurately extracted. The fast iterative shrinkage-thresholding algorithm (FISTA) is used for solving the MFI problem. The optimal regularization parameter is appropriately chosen by the Bayesian information criterion (BIC) method. In order to assess the accuracy and the feasibility of the proposed method, a simply-supported beam bridge subjected to a moving force is taken as an example for numerical simulations. Finally, a series of experimental studies on MFI of a steel beam are performed in laboratory. Both numerical and experimental results show that the proposed method can accurately identify the moving forces with a strong robustness, and it has a better performance than the Tikhonov regularization method. Some related issues are discussed as well.

Laboratory tests on dark energy

International Nuclear Information System (INIS)

Beck, Christian

2006-01-01

The physical nature of the currently observed dark energy in the universe is completely unclear, and many different theoretical models co-exist. Nevertheless, if dark energy is produced by vacuum fluctuations then there is a chance to probe some of its properties by simple laboratory tests based on Josephson junctions. These electronic devices can be used to perform 'vacuum fluctuation spectroscopy', by directly measuring a noise spectrum induced by vacuum fluctuations. One would expect to see a cutoff near 1.7 THz in the measured power spectrum, provided the new physics underlying dark energy couples to electric charge. The effect exploited by the Josephson junction is a subtile nonlinear mixing effect and has nothing to do with the Casimir effect or other effects based on van der Waals forces. A Josephson experiment of the suggested type will now be built, and we should know the result within the next 3 years

Implementation of Scientific Community Laboratories and Their Effect on Student Conceptual Learning, Attitudes, and Understanding of Uncertainty

Science.gov (United States)

Lark, Adam

Scientific Community Laboratories, developed by The University of Maryland, have shown initial promise as laboratories meant to emulate the practice of doing physics. These laboratories have been re-created by incorporating their design elements with the University of Toledo course structure and resources. The laboratories have been titled the Scientific Learning Community (SLC) Laboratories. A comparative study between these SLC laboratories and the University of Toledo physics department's traditional laboratories was executed during the fall 2012 semester on first semester calculus-based physics students. Three tests were executed as pre-test and post-tests to capture the change in students' concept knowledge, attitudes, and understanding of uncertainty. The Force Concept Inventory (FCI) was used to evaluate students' conceptual changes through the semester and average normalized gains were compared between both traditional and SLC laboratories. The Colorado Learning Attitudes about Science Survey for Experimental Physics (E-CLASS) was conducted to elucidate students' change in attitudes through the course of each laboratory. Finally, interviews regarding data analysis and uncertainty were transcribed and coded to track changes in the way students understand uncertainty and data analysis in experimental physics after their participation in both laboratory type. Students in the SLC laboratories showed a notable an increase conceptual knowledge and attitudes when compared to traditional laboratories. SLC students' understanding of uncertainty showed most improvement, diverging completely from students in the traditional laboratories, who declined throughout the semester.

VNTR diversity in Yersinia pestis isolates from an animal challenge study reveals the potential for in vitro mutations during laboratory cultivation.

Science.gov (United States)

Vogler, Amy J; Nottingham, Roxanne; Busch, Joseph D; Sahl, Jason W; Shuey, Megan M; Foster, Jeffrey T; Schupp, James M; Smith, Susan R; Rocke, Tonie E; Keim, Paul; Wagner, David M

2016-11-01

Underlying mutation rates and other evolutionary forces shape the population structure of bacteria in nature. Although easily overlooked, similar forces are at work in the laboratory and may influence observed mutations. Here, we investigated tissue samples and Yersinia pestis isolates from a rodent laboratory challenge with strain CO92 using whole genome sequencing and multi-locus variable-number tandem repeat (VNTR) analysis (MLVA). We identified six VNTR mutations that were found to have occurred in vitro during laboratory cultivation rather than in vivo during the rodent challenge. In contrast, no single nucleotide polymorphism (SNP) mutations were observed, either in vivo or in vitro. These results were consistent with previously published mutation rates and the calculated number of Y. pestis generations that occurred during the in vitro versus the in vivo portions of the experiment. When genotyping disease outbreaks, the potential for in vitro mutations should be considered, particularly when highly variable genetic markers such as VNTRs are used. Copyright © 2016 Elsevier B.V. All rights reserved.

The distinct element analysis for swelling pressure test of bentonite. Discussion on the effects of wall friction force and aspect ratio of specimen

International Nuclear Information System (INIS)

Shimizu, Hiroyuki; Kikuchi, Hirohito; Fujita, Tomoo; Tanai, Kenji

2011-10-01

For geological isolation systems for radioactive waste, bentonite based material is assumed to be used as a buffer material. The swelling characteristics of the bentonite based material are expected to fill up the void space around the radioactive wastes by swelling. In general, swelling characteristics and properties of bentonite are evaluated by the laboratory tests. However, due to the lack of standardization of testing method for bentonite, the accuracy and reproducibility of the testing results are not sufficiently proved. In this study, bentonite swelling pressure test were simulated by newly developed Distinct Element Method (DEM) code, and the effects of wall friction force and aspect ratio of bentonite specimen were discussed. As a result, the followings were found. In the beginning of the swelling pressure test, since swelling occurs only around the fluid injection side of the specimen, wall friction force acts only in the swelling area and the specimen moves to opposite side from fluid injection side. However, when the entire specimen started swelling, displacement of the specimen prevented by the wall friction force, and the specimen is pressed against the pressure measurement side. Then, the swelling pressure measured on the pressure measurement side increases. Such displacement in the specimen is significantly affected by the decreasing of mechanical properties and the difference of saturation in the bentonite specimen during the fluid infiltration. Moreover, when the aspect ratio of the specimen is large, the displacement of the particle in the specimen becomes large and the area on which the wall frictional force acts is also large. Therefore, measured swelling pressure increases more greatly as the aspect ratio of the specimen increases. To contributes to the standardization of laboratory test methods for bentonite, these effects of wall friction force revealed by the DEM simulation should be verified through laboratory experiments. (author)

Environmental Assessment for BRAC Facilities and Remote Field Training Site, Wright-Patterson Air Force Base

Science.gov (United States)

2008-03-01

survey (BHE, 2001). Radio tracking of these two bats confirmed the presence of a maternity colony in a dead slippery elm (Ulmus rubra) in a woodlot...The most common trees observed were black walnut (Juglans nigra), elm (Ulmus spp.), eastern cottonwood, willow, ash (Fraxinus americana), sycamore

Summer Research Program (1992). Summer Faculty Research Program (SFRP) Reports. Volume 5B. Wright Laboratory

Science.gov (United States)

1992-12-01

2] "Proposal for Space Integrated Control Exýeriment (SPICE)", Prepared by Lockheed Missiles & Space Company, Inc. (in col- laboration with...components are given as Xt(k) = AcosO + na(k) (3a) Xo(k) = AsinO + nQ(k). (3b) Since the amplitude, frequency and the phase of the received signal are...N( AcosO ,a 2 ) (12a) XQ(k) = N( AcosO ,a 2). (12b) In this case, the joint probability density function (PDF) is given by 12X,2e -J.w[((r - Acos0)2

Interfacial force measurements using atomic force microscopy

NARCIS (Netherlands)

Chu, L.

2018-01-01

Atomic Force Microscopy (AFM) can not only image the topography of surfaces at atomic resolution, but can also measure accurately the different interaction forces, like repulsive, adhesive and lateral existing between an AFM tip and the sample surface. Based on AFM, various extended techniques have

Force Measurement with a Piezoelectric Cantilever in a Scanning Force Microscope

OpenAIRE

Tansock, J.; Williams, C. C.

1992-01-01

Detection of surface forces between a tip and sample has been demonstrated with a piezoelectric cantilever in a scanning force microscope (SFM). The use of piezoelectric force sensing is particularly advantageous in semiconductor applications where stray light from conventional optical force-sensing methods can significantly modify the local carrier density. Additionally, the piezoelectric sensors are simple, provide good sensitivity to force, and can be batch fabricated. Our piezoelectric fo...

MEMS based Low Cost Piezoresistive Microcantilever Force Sensor and Sensor Module.

Science.gov (United States)

Pandya, H J; Kim, Hyun Tae; Roy, Rajarshi; Desai, Jaydev P

2014-03-01

In the present work, we report fabrication and characterization of a low-cost MEMS based piezoresistive micro-force sensor with SU-8 tip using laboratory made silicon-on-insulator (SOI) substrate. To prepare SOI wafer, silicon film (0.8 µm thick) was deposited on an oxidized silicon wafer using RF magnetron sputtering technique. The films were deposited in Argon (Ar) ambient without external substrate heating. The material characteristics of the sputtered deposited silicon film and silicon film annealed at different temperatures (400-1050°C) were studied using atomic force microscopy (AFM) and X-ray diffraction (XRD) techniques. The residual stress of the films was measured as a function of annealing temperature. The stress of the as-deposited films was observed to be compressive and annealing the film above 1050°C resulted in a tensile stress. The stress of the film decreased gradually with increase in annealing temperature. The fabricated cantilevers were 130 µm in length, 40 µm wide and 1.0 µm thick. A series of force-displacement curves were obtained using fabricated microcantilever with commercial AFM setup and the data were analyzed to get the spring constant and the sensitivity of the fabricated microcantilever. The measured spring constant and sensitivity of the sensor was 0.1488N/m and 2.7mV/N. The microcantilever force sensor was integrated with an electronic module that detects the change in resistance of the sensor with respect to the applied force and displays it on the computer screen.

Laboratory quality assurance

International Nuclear Information System (INIS)

Delvin, W.L.

1977-01-01

The elements (principles) of quality assurance can be applied to the operation of the analytical chemistry laboratory to provide an effective tool for indicating the competence of the laboratory and for helping to upgrade competence if necessary. When used, those elements establish the planned and systematic actions necessary to provide adequate confidence in each analytical result reported by the laboratory (the definition of laboratory quality assurance). The elements, as used at the Hanford Engineering Development Laboratory (HEDL), are discussed and they are qualification of analysts, written methods, sample receiving and storage, quality control, audit, and documentation. To establish a laboratory quality assurance program, a laboratory QA program plan is prepared to specify how the elements are to be implemented into laboratory operation. Benefits that can be obtained from using laboratory quality assurance are given. Experience at HEDL has shown that laboratory quality assurance is not a burden, but it is a useful and valuable tool for the analytical chemistry laboratory

Impact Forces from Tsunami-Driven Debris

Science.gov (United States)

Ko, H.; Cox, D. T.; Riggs, H.; Naito, C. J.; Kobayashi, M. H.; Piran Aghl, P.

2012-12-01

Debris driven by tsunami inundation flow has been known to be a significant threat to structures, yet we lack the constitutive equations necessary to predict debris impact force. The objective of this research project is to improve our understanding of, and predictive capabilities for, tsunami-driven debris impact forces on structures. Of special interest are shipping containers, which are virtually everywhere and which will float even when fully loaded. The forces from such debris hitting structures, for example evacuation shelters and critical port facilities such as fuel storage tanks, are currently not known. This research project focuses on the impact by flexible shipping containers on rigid columns and investigated using large-scale laboratory testing. Full-scale in-air collision experiments were conducted at Lehigh University with 20 ft shipping containers to experimentally quantify the nonlinear behavior of full scale shipping containers as they collide into structural elements. The results from the full scale experiments were used to calibrate computer models and used to design a series of simpler, 1:5 scale wave flume experiments at Oregon State University. Scaled in-air collision tests were conducted using 1:5 scale idealized containers to mimic the container behavior observed in the full scale tests and to provide a direct comparison to the hydraulic model tests. Two specimens were constructed using different materials (aluminum, acrylic) to vary the stiffness. The collision tests showed that at higher speeds, the collision became inelastic as the slope of maximum impact force/velocity decreased with increasing velocity. Hydraulic model tests were conducted using the 1:5 scaled shipping containers to measure the impact load by the containers on a rigid column. The column was instrumented with a load cell to measure impact forces, strain gages to measure the column deflection, and a video camera was used to provide the debris orientation and speed. The

Identification of moving vehicle forces on bridge structures via moving average Tikhonov regularization

Science.gov (United States)

Pan, Chu-Dong; Yu, Ling; Liu, Huan-Lin

2017-08-01

Traffic-induced moving force identification (MFI) is a typical inverse problem in the field of bridge structural health monitoring. Lots of regularization-based methods have been proposed for MFI. However, the MFI accuracy obtained from the existing methods is low when the moving forces enter into and exit a bridge deck due to low sensitivity of structural responses to the forces at these zones. To overcome this shortcoming, a novel moving average Tikhonov regularization method is proposed for MFI by combining with the moving average concepts. Firstly, the bridge-vehicle interaction moving force is assumed as a discrete finite signal with stable average value (DFS-SAV). Secondly, the reasonable signal feature of DFS-SAV is quantified and introduced for improving the penalty function (∣∣x∣∣2 2) defined in the classical Tikhonov regularization. Then, a feasible two-step strategy is proposed for selecting regularization parameter and balance coefficient defined in the improved penalty function. Finally, both numerical simulations on a simply-supported beam and laboratory experiments on a hollow tube beam are performed for assessing the accuracy and the feasibility of the proposed method. The illustrated results show that the moving forces can be accurately identified with a strong robustness. Some related issues, such as selection of moving window length, effect of different penalty functions, and effect of different car speeds, are discussed as well.

Force reconstruction from tapping mode force microscopy experiments

International Nuclear Information System (INIS)

Payam, Amir F; Martin-Jimenez, Daniel; Garcia, Ricardo

2015-01-01

Fast, accurate, and robust nanomechanical measurements are intensely studied in materials science, applied physics, and molecular biology. Amplitude modulation force microscopy (tapping mode) is the most established nanoscale characterization technique of surfaces for air and liquid environments. However, its quantitative capabilities lag behind its high spatial resolution and robustness. We develop a general method to transform the observables into quantitative force measurements. The force reconstruction algorithm has been deduced on the assumption that the observables (amplitude and phase shift) are slowly varying functions of the tip–surface separation. The accuracy and applicability of the method is validated by numerical simulations and experiments. The method is valid for liquid and air environments, small and large free amplitudes, compliant and rigid materials, and conservative and non-conservative forces. (paper)

Phillips Laboratory small satellite initiatives

Science.gov (United States)

Lutey, Mark K.; Imler, Thomas A.; Davis, Robert J.

1993-09-01

The Phillips Laboratory Space Experiments Directorate in conjunction with the Air Force Space Test Program (AF STP), Defense Advanced Research and Projects Agency (DARPA) and Strategic Defense Initiative Organization (SDIO), are managing five small satellite program initiatives: Lightweight Exo-Atmospheric Projectile (LEAP) sponsored by SDIO, Miniature Sensor Technology Integration (MSTI) sponsored by SDIO, Technology for Autonomous Operational Survivability (TAOS) sponsored by Phillips Laboratory, TechSat sponsored by SDIO, and the Advanced Technology Standard Satellite Bus (ATSSB) sponsored by DARPA. Each of these spacecraft fulfills a unique set of program requirements. These program requirements range from a short-lived `one-of-a-kind' mission to the robust multi- mission role. Because of these diverging requirements, each program is driven to use a different design philosophy. But regardless of their design, there is the underlying fact that small satellites do not always equate to small missions. These spacecraft with their use of or ability to insert new technologies provide more capabilities and services for their respective payloads which allows the expansion of their mission role. These varying program efforts culminate in an ATSSB spacecraft bus approach that will support moderate size payloads, up to 500 pounds, in a large set of orbits while satisfying the `cheaper, faster, better' method of doing business. This technical paper provides an overview of each of the five spacecraft, focusing on the objectives, payoffs, technologies demonstrated, and program status.

Labor Force

Science.gov (United States)

Occupational Outlook Quarterly, 2012

2012-01-01

The labor force is the number of people ages 16 or older who are either working or looking for work. It does not include active-duty military personnel or the institutionalized population, such as prison inmates. Determining the size of the labor force is a way of determining how big the economy can get. The size of the labor force depends on two…

A Baseline Load Schedule for the Manual Calibration of a Force Balance

Science.gov (United States)

Ulbrich, N.; Gisler, R.

2013-01-01

A baseline load schedule for the manual calibration of a force balance is defined that takes current capabilities at the NASA Ames Balance Calibration Laboratory into account. The chosen load schedule consists of 18 load series with a total of 194 data points. It was designed to satisfy six requirements: (i) positive and negative loadings should be applied for each load component; (ii) at least three loadings should be applied between 0 % and 100 % load capacity; (iii) normal and side force loadings should be applied at the forward gage location, aft gage location, and the balance moment center; (iv) the balance should be used in "up" and "down" orientation to get positive and negative axial force loadings; (v) the constant normal and side force approaches should be used to get the rolling moment loadings; (vi) rolling moment loadings should be obtained for 0, 90, 180, and 270 degrees balance orientation. In addition, three different approaches are discussed in the paper that may be used to independently estimate the natural zeros, i.e., the gage outputs of the absolute load datum of the balance. These three approaches provide gage output differences that can be used to estimate the weight of both the metric and non-metric part of the balance. Data from the calibration of a six-component force balance will be used in the final manuscript of the paper to illustrate characteristics of the proposed baseline load schedule.

DESALINATION AND WATER TREATMENT RESEARCH AT SANDIA NATIONAL LABORATORIES.

Energy Technology Data Exchange (ETDEWEB)

Rigali, Mark J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Miller, James E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Altman, Susan J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Biedermann, Laura [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Brady, Patrick Vane. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kuzio, Stephanie P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Nenoff, Tina M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rempe, Susan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2016-11-01

Water is the backbone of our economy - safe and adequate supplies of water are vital for agriculture, industry, recreation, and human consumption. While our supply of water today is largely safe and adequate, we as a nation face increasing water supply challenges in the form of extended droughts, demand growth due to population increase, more stringent health-based regulation, and competing demands from a variety of users. To meet these challenges in the coming decades, water treatment technologies, including desalination, will contribute substantially to ensuring a safe, sustainable, affordable, and adequate water supply for the United States. This overview documents Sandia National Laboratories' (SNL, or Sandia) Water Treatment Program which focused on the development and demonstration of advanced water purification technologies as part of the larger Sandia Water Initiative. Projects under the Water Treatment Program include: (1) the development of desalination research roadmaps (2) our efforts to accelerate the commercialization of new desalination and water treatment technologies (known as the 'Jump-Start Program),' (3) long range (high risk, early stage) desalination research (known as the 'Long Range Research Program'), (4) treatment research projects under the Joint Water Reuse & Desalination Task Force, (5) the Arsenic Water Technology Partnership Program, (6) water treatment projects funded under the New Mexico Small Business Administration, (7) water treatment projects for the National Energy Technology Laboratory (NETL) and the National Renewable Energy Laboratory (NREL), (8) Sandia- developed contaminant-selective treatment technologies, and finally (9) current Laboratory Directed Research and Development (LDRD) funded desalination projects.

Inferring Interaction Force from Visual Information without Using Physical Force Sensors.

Science.gov (United States)

Hwang, Wonjun; Lim, Soo-Chul

2017-10-26

In this paper, we present an interaction force estimation method that uses visual information rather than that of a force sensor. Specifically, we propose a novel deep learning-based method utilizing only sequential images for estimating the interaction force against a target object, where the shape of the object is changed by an external force. The force applied to the target can be estimated by means of the visual shape changes. However, the shape differences in the images are not very clear. To address this problem, we formulate a recurrent neural network-based deep model with fully-connected layers, which models complex temporal dynamics from the visual representations. Extensive evaluations show that the proposed learning models successfully estimate the interaction forces using only the corresponding sequential images, in particular in the case of three objects made of different materials, a sponge, a PET bottle, a human arm, and a tube. The forces predicted by the proposed method are very similar to those measured by force sensors.

Molecular Dynamics Simulations of a Linear Nanomotor Driven by Thermophoretic Forces

DEFF Research Database (Denmark)

Zambrano, Harvey A; Walther, Jens Honore; Jaffe, Richard L.

Molecular Dynamics of a Linear Nanomotor Driven by Thermophoresis Harvey A. Zambrano1, Jens H. Walther1,2 and Richard L. Jaffe3 1Department of Mechanical Engineering, Fluid Mechanics, Technical University of Denmark, DK-2800 Lyngby, Denmark; 2Computational Science and Engineering Laboratory, ETH...... future molecular machines a complete understanding of the friction forces involved on the transport process at the molecular level have to be addressed.18 In this work we perform Molecular Dynamics (MD) simulations using the MD package FASTTUBE19 to study a molecular linear motor consisting of coaxial...... the valence forces within the CNT using Morse, harmonic angle and torsion potentials.19We include a nonbonded carbon-carbon Lennard-Jones potential to describe the vdW interaction between the carbon atoms within the double wall portion of the system. We equilibrate the system at 300K for 0.1 ns, by coupling...

SPI Project Criticality Task Force initial review and assessment

International Nuclear Information System (INIS)

McKinley, K.B.; Cannon, J.W.; Marsden, R.S.; Worle, H.A.

1980-03-01

The Slagging Pyrolysis Incinerator (SPI) Facility is being developed to process transuranic waste stored and buried at the Idaho National Engineering Laboratory (INEL) into a chemically inert, physically stable, basalt-like residue acceptable for a Federal Repository. A task force was established by the SPI Project Division to review and assess all aspects of criticality safety for the SPI Facility. This document presents the initial review, evaluations, and recommendations of the task force and includes the following: background information on waste characterization, and criticality control approaches and philosophies, a description of the SPI Facility Waste Processing Building, a review and assessment of potentially relevant codes and regulations; a review and assessment of the present state of criticality and assaying/monitoring studies, and recommendations for changes in and additions to these studies. The review and assessment of potentially relevant codes and regulations indicate that ERDAM 0530, Nuclear Criticality Safety should be the controlling document for criticality safety for the SPI Project. In general, the criticality control approaches and philosophies for the SPI Project comply with this document

TWTF project criticality task force final review and assessment

International Nuclear Information System (INIS)

McKinley, K.B.; Cannon, J.W.; Wheeler, F.J.; Worle, H.A.

1980-11-01

The Transuranic Waste Treatment Facility (TWTF) is being developed to process transuranic waste, stored and buried at the Idaho National Engineering Laboratory, into a chemically inert, physically stable basalt-like residue acceptable at a federal repository. A task force was assembled by the TWTF Project Division to review and assess all aspects of criticality safety for the TWTF. This document presents the final review, assessments, and recommendations of this task force. The following conclusions were made: Additional criticality studies are needed for the entire envelope of feed compositions and temperature effects. Safe operating k/sub eff/'s need to be determined for process components. Criticality analyses validation experiments may also be required. SRP neutron interrogation should be replaced by DDT neutron interrogation. Accuracy studies need to be performed for the proposed assaying techniques. Time-correlated neutron monitoring needs to be mocked up for process components to prove feasibility and determine accuracy. The criticality control techniques developed for the TWTF conceptual design are in compliance with ERDAM 0530, including the Double Contingency Rule. Detailed procedures and controls need to be developed

Digital force-feedback for protein unfolding experiments using atomic force microscopy

Science.gov (United States)

Bippes, Christian A.; Janovjak, Harald; Kedrov, Alexej; Muller, Daniel J.

2007-01-01

Since its invention in the 1990s single-molecule force spectroscopy has been increasingly applied to study protein (un-)folding, cell adhesion, and ligand-receptor interactions. In most force spectroscopy studies, the cantilever of an atomic force microscope (AFM) is separated from a surface at a constant velocity, thus applying an increasing force to folded bio-molecules or bio-molecular bonds. Recently, Fernandez and co-workers introduced the so-called force-clamp technique. Single proteins were subjected to a defined constant force allowing their life times and life time distributions to be directly measured. Up to now, the force-clamping was performed by analogue PID controllers, which require complex additional hardware and might make it difficult to combine the force-feedback with other modes such as constant velocity. These points may be limiting the applicability and versatility of this technique. Here we present a simple, fast, and all-digital (software-based) PID controller that yields response times of a few milliseconds in combination with a commercial AFM. We demonstrate the performance of our feedback loop by force-clamp unfolding of single Ig27 domains of titin and the membrane proteins bacteriorhodopsin (BR) and the sodium/proton antiporter NhaA.

Digital force-feedback for protein unfolding experiments using atomic force microscopy

International Nuclear Information System (INIS)

Bippes, Christian A; Janovjak, Harald; Kedrov, Alexej; Muller, Daniel J