WorldWideScience

Sample records for force base florida

  1. Environmental Assessment for the 920th Rescue Wing Beddown Patrick Air Force Base, Florida

    Science.gov (United States)

    2005-10-01

    Vista Technologies Inc. Environmental Assessment, Development and Maintenance of Patrick Air Force Base, Florida. January 1997. Canter , Larry W...Space Wing 45 CES/CEVC PAFB, Florida 920th Rescue Wing Beddown Environmental Assessment 8-1 8.0 LIST OF PREPARERS 1. David B

  2. Initial Remedial Action Plan for Expanded Bioventing System BX Service Station, Patrick Air Force Base, Florida

    National Research Council Canada - National Science Library

    1995-01-01

    This initial remedial action plan presents the scope for an expanded bioventing system for in situ treatment of fuel-contaminated soils at the BX Service Station at Patrick Air Force Base (AFB), Florida...

  3. Kriging analysis of uranium concentrations in Test Area C-74L, Eglin Air Force Base, Florida

    International Nuclear Information System (INIS)

    White, G.C.

    1981-05-01

    Soil samples from Test Area C-74L, Eglin Air Force Base, Florida, were analyzed for depleted uranium by instrumental epithermal neutron activation analysis. The sampling design used was a modified polar coordinate scheme. The resulting data were analyzed with a statistical procedure called kriging to obtain a contour map of concentration and a 95% confidence interval map. The majority of uranium remains in the center of the area near the target abutment

  4. Environmental Assessment for the General Plan and Maintenance of Patrick Air Force Base, Florida

    Science.gov (United States)

    2005-05-01

    convert the incoming 138-kilovolt (kV) electricity to a nominal distribution voltage of 13.2 kV, and then route the power to government-owned switchgear ...FLORIDA STATE CLEARINGHOUSE Department of Environmental Protection jeb Bush Governor Mr. Wesley J. Westphal Department of the Air Force 45 CES

  5. Ground measurements of fuel and fuel consumption from experimental and operational prescribed fires at Eglin Air Force Base, Florida

    Science.gov (United States)

    Roger D. Ottmar; Robert E. Vihnanek; Clinton S. Wright; Andrew T. Hudak

    2014-01-01

    Ground-level measurements of fuel loading, fuel consumption, and fuel moisture content were collected on nine research burns conducted at Eglin Air Force Base, Florida in November, 2012. A grass or grass-shrub fuelbed dominated eight of the research blocks; the ninth was a managed longleaf pine (Pinus palustrus) forest. Fuel loading ranged from 1.7 Mg ha-1 on a...

  6. Environmental Assessment for Construction of the United States Air Force Technical Application Center (AFTAC) on Patrick Air Force Base, Florida (Amended)

    Science.gov (United States)

    2010-07-01

    architectural , and Native American resources. Areas of potential impact include properties, structures, landscapes, or traditional cultural sites...occur before packaging). Laboratory processes, storage and handling will be coordinated with 45 SW units of Bioenvironmental , Wing Safety, Medical...1994. Historical and Architectural Documentation Reports of Patrick Air Force Base, Cocoa Beach, Florida. U.S. Army Construction Engineering

  7. Threatened and Endangered Species Survey for Patrick Air Force Base, Florida

    Science.gov (United States)

    Oddy, Donna M.; Stolen, Eric D.; Schmalzer, Paul A.; Larson, Vickie L.; Hall, Patrice; Hensley, Melissa A.

    1997-01-01

    A review of previous environmental work conducted at Patrick Air Force Base (PAFB) indicated that several threatened, endangered, or species of special concern occurred or had the potential to occur there. This study was implemented to collect more information on protected species at PAFB. A map of landcover types was prepared for PAFB using aerial photography, groundtruthing, and a geographic information system (GIS). Herbaceous vegetation was the most common vegetation type. The second most abundant vegetation type was disturbed shrubs/exotics. The beach and associated dune vegetation comprised 3.2% of the land area, but was the most extensive natural community within PAFB. A few isolated mangrove communities exist along the Banana River. Seventy-seven species of vascular plants occurred on the dunes, including four species listed by state agencies: spider lily (Hymenocallis latifolia), prickly pear cactus (Opuntia stricta), beach star (Remirea maritima), and inkberry (Scaevola plumien). Surveys of other habitats revealed eighty-four species of vascular plants including two state-listed species: spider lily and prickly pear cactus. Many of these areas are dominated by invasive, exotic species, particularly Brazilian pepper (Schinus terebinthifolius) and Australian pine (Casuarina equisetifolia), and native species of open or disturbed sites such as camphorweed (Heterotheca subaxillaris) and beardgrass (Andropogon spp.). Due to the isolation of PAFB from other natural areas, most exotic plant populations on the base are not an immediate threat to intact native plant communities. Dune habitat was surveyed for the southeastem beach mouse (Peromyscus polionotus niveiventris) by quarterly trapping along eight 100 m transects. No beach mice were found. The limited extent of dune habitat, its fragmented condition, and the isolation of PAFB from extant populations of the beach mouse probably accounts for its absence. Surveys of birds on PAFB found an avifauna

  8. F-22 Operational Squadron and T-38 Detachment Beddown at Tyndall Air Force Base, Florida

    Science.gov (United States)

    2011-08-01

    Rattlesnake Crotalus adamanteus Bracken Fern Pteridium aquilinum Six-lined Racerunner Cnemidophorus sexlineatus Blueberry Vaccinium spp. Florida Black Bear...adamanteus Bracken Fern Pteridium aquilinum Pileated Woodpecker Dryocopus pileatus Blackberry Rubus cuneifolius Pine Siskin Carduelis pinus Flatwoods

  9. Range Environmental Assessment Overland Air Operations, Eglin Air Force Base, Florida

    Science.gov (United States)

    2014-11-12

    FLORIDA on the primary soil types that occur on Eglin AFB. The soils on Eglin AFB originated from the Citronelle Formation as well as from alluvium...hammock, blackwater stream, alluvial stream, spring run stream, seepage stream, marsh lake, slough, dome swamp, strand swamp, basin marsh

  10. Test Area C-74 Complex Final Range Environmental Assessment at Eglin Air Force Base, Florida

    Science.gov (United States)

    2015-08-21

    testing category (U.S. Air Force, 2007). Kinetic Energy Munitions Facility (KEMTF) The KEMTF is a 2,000-foot, dual rail sled track inclined to 0.6...KEMTF. After the munitions impact with the reusable wall, the wall can be removed and a new concrete wall can be welded into place (U.S. Air Force...dual- rail sled track. The downrange impact/recovery area consists of about 773 acres of maintained grassland, a 4-acre pond, and 83 acres in riparian

  11. Santa Rosa Island Final Range Environmental Assessment, Revision 1. Eglin Air Force Base, Florida

    Science.gov (United States)

    2012-03-01

    nvironmenfal Assessment. Santa Rosa island Reconslitution Tesi Capabilities. Apri11998. 37 U.S. Air Force. 1998c. Environmemal AssessmenT ji:Jr...Coastal Tesiing of 1he Shallow Water Assaul1 Breaching 38 {SABRE) and Dislributed Explosive Technology (DEl) s:vsrems. September 1998. 39 USAF. 1998d

  12. Test Area C-62 Final Range Environmental Assessment at Eglin Air Force Base, Florida

    Science.gov (United States)

    2015-06-05

    impermeable surfaces (i.e., concrete , asphalt) would result in an increase in stormwater runoff. If all past, present, and reasonably foreseeable projects...immediately to the west of the support building and has a power supply. In 2004 Eglin AFB removed the concrete block storage house (building 8757...however, concrete markers and boxes along Range Road 210 indicate that some utilities are either currently or formerly underground (U.S. Air Force

  13. Environmental Assessment for the Solar Photovoltaic Array, Eglin Air Force Base, Florida

    Science.gov (United States)

    2014-01-24

    grading) and the addition of impermeable surfaces ( concrete , asphalt, etc.) would result in increases in stormwater runoff. Wetlands. Wetlands are...such as clearing) and the addition of impermeable or semi- impermeable surfaces (asphalt, clay, gravel, etc.) would result in rate changes and...require consumption of limited amounts of materials typically associated with construction (e.g., concrete , gravel). The Air Force does not expect the

  14. Environmental Assessment for the Solar Photovoltaic Array at Eglin Air Force Base, Florida

    Science.gov (United States)

    2014-01-24

    as clearing and grading) and the addition of impermeable surfaces ( concrete , asphalt, etc.) would result in increases in stormwater runoff...disturbing activities (such as clearing) and the addition of impermeable or semi- impermeable surfaces (asphalt, clay, gravel, etc.) would result in...require consumption of limited amounts of materials typically associated with construction (e.g., concrete , gravel). The Air Force does not expect

  15. Environmental Assessment Military Family Housing Privatization Tyndall Air Force Base, Florida

    Science.gov (United States)

    2005-07-01

    organizations such as the Canadian Forces Detachment, 148th Fighter Wing of the Minnesota Air National Guard, and several civilian contractors. DoD agencies...of this chapter). The survey revealed remnants of prehistoric artifact scattered throughout the area including aboriginal ceramics and shell food...days are available per year for construction (accounting for weekends, weather, and holidays ), and that only half of these working days would result

  16. Environmental Assessment for Cantonment Areas at Eglin Air Force Base, Florida

    Science.gov (United States)

    2014-10-28

    can increase flooding. Land-disturbing activities (such as clearing and grading) and the addition of impermeable surfaces ( concrete , asphalt, etc...the concrete containment berms around the two ASTs. According to Eglin AFB records, base personnel responded to reports of a JP-4 surface spill in...and disposal of hazardous materials and waste, including materials such as sealant and surface treatment substances used for parking apron concrete

  17. Final Environmental Assessment: For Okaloosa County Wastewater Treatment Facility Eglin Air Force Base, Florida

    Science.gov (United States)

    2004-04-01

    Material Environmental Fate and Transport Health Effects Exposure Assessment Herbicides Cont’d Weedmaster – Dimethylamine salt of dicamba (12.4...meaning or interpretation, and each was developed to represent the effects of environmental noise. The primary noise metrics considered in this EA...and the cumulative environmental impacts of these effects . Independently, federal, state, and local regulations can affect the region and the base

  18. 78 FR 27126 - East Bay, St. Andrews Bay and the Gulf of Mexico at Tyndall Air Force Base, Florida; Restricted...

    Science.gov (United States)

    2013-05-09

    ... your comment. Electronic comments should avoid the use of any special characters, any form of... use of the area, the Corps expects that this regulation, if adopted, will not have a significant... and Apalachicola Bay south of Apalachicola, Fla., Drone Recovery Area, Tyndall Air Force Base, Fla...

  19. Test Area C-72 and Line of Sight, Eglin Air Force Base, Florida Final Range Environmental Assessment (REA), Revision 1

    Science.gov (United States)

    2011-07-28

    and education and training of appropriate personnel in the hazards, safe handling, and transportation of these materials (U.S. Air Force, 2006a...C., C. A. Hess, B. C. Kicklighter, and R. A. Thum. 2001. Ecosystem management and the niche gestalt of the red-cockaded woodpecker in longleaf...and the niche gestalt of the red-cockaded woodpecker in longleaf pine forests. Ecological Applications, Vol t 1, pp 854-870. O’Connell, E., 2011

  20. Finding of No Significant Impact and Finding of No Practicable Alternative: Construction of Airfield Drainage Improvement Projects MacDill Air Force Base, Florida

    Science.gov (United States)

    2011-08-02

    short-tailed snake, Bachman‘s warbler , and Florida mouse. An Affected Environment Environmental Assessment for Construction of Airfield Drainage...located a significant distance east of the proposed airfield drainage work, and just north of the wetland mitigation sites. A pair of bald eagles...americana E E Brown pelican Pelecanus occidentalis - SSC Least tern Sterna antillarum - T Roseate tern Sterna dougalii T T Bachman‘s warbler Vermivora

  1. Hydrologic transport of depleted uranium associated with open air dynamic range testing at Los Alamos National Laboratory, New Mexico, and Eglin Air Force Base, Florida

    International Nuclear Information System (INIS)

    Becker, N.M.; Vanta, E.B.

    1995-01-01

    Hydrologic investigations on depleted uranium fate and transport associated with dynamic testing activities were instituted in the 1980's at Los Alamos National Laboratory and Eglin Air Force Base. At Los Alamos, extensive field watershed investigations of soil, sediment, and especially runoff water were conducted. Eglin conducted field investigations and runoff studies similar to those at Los Alamos at former and active test ranges. Laboratory experiments complemented the field investigations at both installations. Mass balance calculations were performed to quantify the mass of expended uranium which had transported away from firing sites. At Los Alamos, it is estimated that more than 90 percent of the uranium still remains in close proximity to firing sites, which has been corroborated by independent calculations. At Eglin, we estimate that 90 to 95 percent of the uranium remains at test ranges. These data demonstrate that uranium moves slowly via surface water, in both semi-arid (Los Alamos) and humid (Eglin) environments

  2. Hydrologic transport of depleted uranium associated with open air dynamic range testing at Los Alamos National Laboratory, New Mexico, and Eglin Air Force Base, Florida

    Energy Technology Data Exchange (ETDEWEB)

    Becker, N.M. [Los Alamos National Lab., NM (United States); Vanta, E.B. [Wright Laboratory Armament Directorate, Eglin Air Force Base, FL (United States)

    1995-05-01

    Hydrologic investigations on depleted uranium fate and transport associated with dynamic testing activities were instituted in the 1980`s at Los Alamos National Laboratory and Eglin Air Force Base. At Los Alamos, extensive field watershed investigations of soil, sediment, and especially runoff water were conducted. Eglin conducted field investigations and runoff studies similar to those at Los Alamos at former and active test ranges. Laboratory experiments complemented the field investigations at both installations. Mass balance calculations were performed to quantify the mass of expended uranium which had transported away from firing sites. At Los Alamos, it is estimated that more than 90 percent of the uranium still remains in close proximity to firing sites, which has been corroborated by independent calculations. At Eglin, we estimate that 90 to 95 percent of the uranium remains at test ranges. These data demonstrate that uranium moves slowly via surface water, in both semi-arid (Los Alamos) and humid (Eglin) environments.

  3. Air and Ground Gunnery: Test Areas A-73, A-77, A-78, A-79, B-7, and B-75, Range Environmental Assessment, Eglin Air Force Base, Florida

    Science.gov (United States)

    2013-06-01

    meteorological conditions. These two sets of conditions represent the typical extremes with regard to weather influence on noise propagation that may be...Environmental Assessment ( PEA ) (U.S. Air Force, 2004). Table 2-1 shows the previously approved level of activity under the No Action Alternative...operations were not previously analyzed in the Air-to-Ground Gunnery PEA (U.S. Air Force, 2004). Alternative 1 adds live fire small arms and light explosives

  4. Finding of No Significant Impact and Finding of No Practicable Alternative: Construction of Visiting Quarters - Phase One and Phase Two MacDill Air Force Base, Florida

    Science.gov (United States)

    2011-07-13

    wastewater treatment plant ( WWTP ). The WWTP is in the southeastern corner of the base on Bayshore Drive. The WWTP is permitted to treat 1.2 million...adjacent to the WWTP . The two golf courses at the Bay Palms Golf Complex on Base use most of the discharge for irrigation purposes. During dry...Avenue. The WWTP service area does not completely encompass the Base; therefore, MacDill AFB uses on-site septic systems for wastewater treatment

  5. Hanscom Air Force Base

    Data.gov (United States)

    Federal Laboratory Consortium — MIT Lincoln Laboratory occupies 75 acres (20 acres of which are MIT property) on the eastern perimeter of Hanscom Air Force Base, which is at the nexus of Lexington,...

  6. Florida Model Task Force on Diabetic Retinopathy: Development of an Interagency Network.

    Science.gov (United States)

    Groff, G.; And Others

    1990-01-01

    This article describes the development of a mechanism to organize a network in Florida for individuals who are at risk for diabetic retinopathy. The task force comprised representatives from governmental, academic, professional, and voluntary organizations. It worked to educate professionals, patients, and the public through brochures, resource…

  7. Forecasting Lightning at Kennedy Space Center/Cape Canaveral Air Force Station, Florida

    Science.gov (United States)

    Lambert, Winfred; Wheeler, Mark; Roeder, William

    2005-01-01

    The Applied Meteorology Unit (AMU) developed a set of statistical forecast equations that provide a probability of lightning occurrence on Kennedy Space Center (KSC) I Cape Canaveral Air Force Station (CCAFS) for the day during the warm season (May September). The 45th Weather Squadron (45 WS) forecasters at CCAFS in Florida include a probability of lightning occurrence in their daily 24-hour and weekly planning forecasts, which are briefed at 1100 UTC (0700 EDT). This information is used for general scheduling of operations at CCAFS and KSC. Forecasters at the Spaceflight Meteorology Group also make thunderstorm forecasts for the KSC/CCAFS area during Shuttle flight operations. Much of the current lightning probability forecast at both groups is based on a subjective analysis of model and observational data. The objective tool currently available is the Neumann-Pfeffer Thunderstorm Index (NPTI, Neumann 1971), developed specifically for the KSCICCAFS area over 30 years ago. However, recent studies have shown that 1-day persistence provides a better forecast than the NPTI, indicating that the NPTI needed to be upgraded or replaced. Because they require a tool that provides a reliable estimate of the daily thunderstorm probability forecast, the 45 WS forecasters requested that the AMU develop a new lightning probability forecast tool using recent data and more sophisticated techniques now possible through more computing power than that available over 30 years ago. The equation development incorporated results from two research projects that investigated causes of lightning occurrence near KSCICCAFS and over the Florida peninsula. One proved that logistic regression outperformed the linear regression method used in NPTI, even when the same predictors were used. The other study found relationships between large scale flow regimes and spatial lightning distributions over Florida. Lightning, probabilities based on these flow regimes were used as candidate predictors in

  8. Sensitivity of wetland hydrology to external climate forcing in central Florida

    NARCIS (Netherlands)

    Lammertsma, E.I.; Donders, T.H.; Pearce, C.; Cremer, H.; Gaiser, E.E.; Wagner-Cremer, F.

    2015-01-01

    Available proxy records from the Florida peninsula give a varying view on hydrological changes during the late Holocene. Here we evaluate the consistency and sensitivity of local wetland records in relation to hydrological changes over the past ~. 5. ka based on pollen and diatom proxies from peat

  9. 76 FR 75453 - Restricted Areas and Danger Zones at Eglin Air Force Base, FL

    Science.gov (United States)

    2011-12-02

    ... and Danger Zones at Eglin Air Force Base, FL AGENCY: U.S. Army Corps of Engineers, Department of... within the Eglin Air Force Base (AFB) facilities and along the Eglin AFB facility shoreline in Florida... have the permission of the Commander, 96 Air Base Wing, Eglin AFB or his/her authorized representative...

  10. US Air Force Base Observations

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Hourly observations taken by U.S. Air Force personnel at bases in the United States and around the world. Foreign observations concentrated in the Middle East and...

  11. Air Force Smart Bases

    Science.gov (United States)

    2017-10-19

    and mobility for generating combat power while maintaining cybersecurity and accruing the benefits of technology in their lives . Figure 2...Designers ideate 100’s if not 1000’s of ways IoT and smart base technologies may improve the lives of Airmen. Figure 3: A conceptual AF mobile...innovation that unlock mission capabilities for Airmen. Both use cases are important (and can be integrated), but the functionals must continue to remind

  12. Florida Public Health Training Center: Evidence-Based Online Mentor Program

    Science.gov (United States)

    Frahm, Kathryn A.; Alsac-Seitz, Biray; Mescia, Nadine; Brown, Lisa M.; Hyer, Kathy; Liburd, Desiree; Rogoff, David P.; Troutman, Adewale

    2013-01-01

    This article describes an Online Mentor Program (OMP) designed to support and facilitate mentorships among and between Florida Department of Health (FDOH) employees and USF College of Public Health students using a Web-based portal. The Florida Public Health Training Center (FPHTC) at the University of South Florida (USF) College of Public Health…

  13. Proceedings of the Task Force on Language Learning Disabilities (Orlando, Florida, May 18-20, 1983 and November 2-4, 1983).

    Science.gov (United States)

    Florida State Dept. of Education, Tallahassee. Bureau of Education for Exceptional Students.

    This resource manual--proceedings of two task force meetings--is intended to assist Florida school districts, state agencies, and parents in the provision of special programs for students who exhibit disorders in oral or written language. As part of a continuing effort to improve services for exceptional students in Florida's public schools, the…

  14. Competency-Based Materials for the Florida Automotive Mechanics Curriculum

    Science.gov (United States)

    Goodson, Ludy; And Others

    1978-01-01

    Describes Florida's new automotive mechanics curriculum, an individualized, self-paced learning sequence that combines text material, review exercises and actual work activities. Development of the materials, including incorporation of Florida's V-TECS catalog of performance objectives in auto mechanics, is described. A field-test experience of a…

  15. Bulk Fuel Storage Facility Cape Canaveral Air Force Station, Florida. Environmental Assessment

    Science.gov (United States)

    2006-11-01

    Implementation of best management practices during construction of the new facility would ameliorate potential negative impacts on the geology and soils... Matrix ..................................5-1 vii FINAL ENVIRONMENTAL ASSESSMENT FOR BULK FUEL STORAGE FACILITY CAPE CANAVERAL AFS, FLORIDA...N SI TE .APPROVAL APPLICATION DESC FUEL DEPOT PROJEC T NO N/A PROJECT SON: N00-10248937 SCALE· DATE· AS SHOW N 18 NOV 2005 PLN >INER: DRN’TER

  16. Effects of the Base Substrate and Dietary supplementson Growth Indices Florida Oyster Mushroom (Pleurotus florida

    Directory of Open Access Journals (Sweden)

    F. Makenali

    2016-02-01

    Full Text Available Introduction: Oystermush rooms contain a wide enzymatic system to catalyze lignocellu lose and naturally live in organs of plants that are protein-rich. Agricultural and industrial wastes contain organic cellulosic materials such as cereal straw, sawdust and leaves that are suitable substrate for growth of oyster mushrooms. Previous studies have shown that dietary supplements increase growth indices of oyster mushrooms. Materials and Methods: Spawn of Florida oyster mushrooms wereprovided experimentally on grains of wheat. The experiment was conducted in the laboratory of the Agricultural College of Mehr Shar, Islamic Azad University of Karaj, Iran in 2011. Two factors were considered in this study substrate (A and dietary supplements(B. Sugarcane bag asse (A1 and wheat straw (A2 were shed into polyethylene bags after they were pasteurized by boiling vapor and spawning was conducted according to wet weight of straw bags which was 4 kg. Supplements of Nitrogen werecottonseed powder, 2%soya flour, and urea0.5% that were added to substrate according to dry weight of substrate (1334 gr. Mushrooms were transferred to the laboratory after cropping in order to measure dry and wet weight. They were packed and dried in the oven during 24-72 hours at 60-70ºC. In order to estimate the biological efficiency, the produced crop was divided by weight consumed substrate that was multiplied by 100. A completely randomized factorial statistical experiment according to completely randomized design with 16 treatments and three replications was conducted. MSTAT soft ware was used for statistical analysis and the Dunkan test was used for comparing mean data with probability of 5%.Finally figures were drown using Excel. Results and Discussion: In wheat straw substrate mushrooms were produced with high biological efficiency and yield, because compared to sugarcane bagasse, wheat straw needs a shorter period for fermentation, contains more nutrients, catalyzed faster

  17. Grading the Metrics: Performance-Based Funding in the Florida State University System

    Science.gov (United States)

    Cornelius, Luke M.; Cavanaugh, Terence W.

    2016-01-01

    A policy analysis of Florida's 10-factor Performance-Based Funding system for state universities. The focus of the article is on the system of performance metrics developed by the state Board of Governors and their impact on institutions and their missions. The paper also discusses problems and issues with the metrics, their ongoing evolution, and…

  18. Florida-specific NTCIP management information base (MIB) for closed-circuit television (CCTV) camera : final draft.

    Science.gov (United States)

    2009-01-01

    Description: This following MIB has been developed for use by FDOT. This : proposed Florida-Specific NTCIP Management Information Base (MIB) For : Closed-Circuit Television (CCTV) Camera MIB is based on the following : documentations: : NTCIP 120...

  19. Driving Force Based Design of Cyclic Distillation

    DEFF Research Database (Denmark)

    Nielsen, Rasmus Fjordbak; Huusom, Jakob Kjøbsted; Abildskov, Jens

    2017-01-01

    Driving force based design is adopted from conventional continuous distillation to cyclic distillation. This leads to a definition of the operating line representation for the cyclic distillation process. A possible realization of the driving force design is presented, which implies operation...... with mixed phase feeds. A range of binary test cases, benzene toluene, methanol water, and ethanol water, are evaluated. The advantage of the design approach in cyclic distillation is shown to be analogous to the advantages obtained in conventional continuous distillation, including a minimal utility...

  20. Modifications to the Objective Lightning Probability Forecast Tool at Kennedy Space Center/Cape Canaveral Air Force Station, Florida

    Science.gov (United States)

    Crawford, Winifred; Roeder, William

    2010-01-01

    The 45th Weather Squadron (45 WS) at Cape Canaveral Air Force Station (CCAFS) includes the probability of lightning occurrence in their 24-Hour and Weekly Planning Forecasts, briefed at 0700 EDT for daily operations planning on Kennedy Space Center (KSC) and CCAFS. This forecast is based on subjective analyses of model and observational data and output from an objective tool developed by the Applied Meteorology Unit (AMU). This tool was developed over two phases (Lambert and Wheeler 2005, Lambert 2007). It consists of five equations, one for each warm season month (May-Sep), that calculate the probability of lightning occurrence for the day and a graphical user interface (GUI) to display the output. The Phase I and II equations outperformed previous operational tools by a total of 56%. Based on this success, the 45 WS tasked the AMU with Phase III to improve the tool further.

  1. An Altimetry-Derived Index of the Offshore Forcing on the "Pressure Point" of the West Florida Shelf: Anomalous Upwelling and Its Influence on Harmful Algal Blooms

    Science.gov (United States)

    Liu, Y.; Weisberg, R. H.; Lenes, J. M.; Zheng, L.; Hubbard, K.; Walsh, J. J.

    2017-12-01

    Gulf of Mexico Loop Current (LC) interactions with the West Florida Shelf (WFS) slope play an important role in shelf ecology through the upwelling of new inorganic nutrients across the shelf break. This is particularly the case when the LC impinges upon the shelf slope in the southwest portion of the WFS near the Dry Tortugas. By contacting shallow water isobaths at this "pressure point" the LC forcing sets the entire shelf into motion. Characteristic patterns of LC interactions with the WFS and their occurrences are identified from altimetry data using unsupervised neural network, self-organizing map. The duration of the occurrences of such LC patterns is used as an indicator of offshore forcing of anomalous upwelling. Consistency is found between the altimetry-derived offshore forcing and the occurrence and severity of WFS coastal blooms of the toxic dinoflagellate, Karenia brevis: years without major blooms tend to have prolonged LC contact at the "pressure point," whereas years with major blooms tend not to have prolonged offshore forcing. Resetting the nutrient state of the shelf by the coastal ocean circulation in response to deep-ocean forcing demonstrates the importance of physical oceanography in shelf ecology. A satellite altimetry-derived seasonal predictor for major K. brevis blooms is also proposed.

  2. Final Environmental Assessment Nellis Air Force Base School Initiative, Nellis Air Force Base, Clark County, Nevada

    Science.gov (United States)

    2015-04-01

    sobre e/ borrador de Ia EValuaci6n Ambfental para kJ inle/ativa eseolar de Nellis Air Force Base Clark County, Nevada. La fuena A~rea de Estados Unidos ...contact 99 ABWIPA at: (702) 652·2750 AVISO DE OISPONIBILJDAD La Fuerza A6rea de los- Estados Unldos invica al ,Ubtrco a presenrar comenrarios...scbr’e ef bof(ador de Ia Evaluacl6n Ambiental para Ia lnlt:Fativa escolar de Nellis Air Force Base Clark county, Nevada. L.a fuerza A~rea de Estados

  3. Development and implementation of a Bayesian-based aquifer vulnerability assessment in Florida

    Science.gov (United States)

    Arthur, J.D.; Wood, H.A.R.; Baker, A.E.; Cichon, J.R.; Raines, G.L.

    2007-01-01

    The Florida Aquifer Vulnerability Assessment (FAVA) was designed to provide a tool for environmental, regulatory, resource management, and planning professionals to facilitate protection of groundwater resources from surface sources of contamination. The FAVA project implements weights-of-evidence (WofE), a data-driven, Bayesian-probabilistic model to generate a series of maps reflecting relative aquifer vulnerability of Florida's principal aquifer systems. The vulnerability assessment process, from project design to map implementation is described herein in reference to the Floridan aquifer system (FAS). The WofE model calculates weighted relationships between hydrogeologic data layers that influence aquifer vulnerability and ambient groundwater parameters in wells that reflect relative degrees of vulnerability. Statewide model input data layers (evidential themes) include soil hydraulic conductivity, density of karst features, thickness of aquifer confinement, and hydraulic head difference between the FAS and the watertable. Wells with median dissolved nitrogen concentrations exceeding statistically established thresholds serve as training points in the WofE model. The resulting vulnerability map (response theme) reflects classified posterior probabilities based on spatial relationships between the evidential themes and training points. The response theme is subjected to extensive sensitivity and validation testing. Among the model validation techniques is calculation of a response theme based on a different water-quality indicator of relative recharge or vulnerability: dissolved oxygen. Successful implementation of the FAVA maps was facilitated by the overall project design, which included a needs assessment and iterative technical advisory committee input and review. Ongoing programs to protect Florida's springsheds have led to development of larger-scale WofE-based vulnerability assessments. Additional applications of the maps include land-use planning

  4. Does Prison-Based Adult Basic Education Improve Postrelease Outcomes for Male Prisoners in Florida?

    Science.gov (United States)

    Cho, Rosa Minhyo; Tyler, John H

    2013-10-01

    The authors use administrative data from Florida to determine the extent to which prison-based adult basic education (ABE) improves inmate's postrelease labor market outcomes, such as earnings and employment. Using two nonexperimental comparison groups, the authors find evidence that ABE participation is associated with higher postrelease earnings and employment rates, especially for minorities. The authors find that the relationship is the largest for ABE participants who had uninterrupted ABE instruction and for those who received other education services. However, the results do not find any positive effects of ABE participation on reducing recidivism.

  5. An assessment of standards-based reform in Florida's middle school science programs

    Science.gov (United States)

    Stuart Hammer, Kathryn Elizabeth

    The era of school accountability and standards based reform (SBR) has brought many challenges and changes to Florida's public schools. It is important to understand any shifts in teachers' attitudes and to identify the changes teachers are making as they implement SBR. The study was designed to assess teachers' attitudes and perceptions of changes related to SBR and the Florida Comprehensive Assessment Test (FCAT) in middle school science programs in Florida. Survey questions sought to identify teacher perceptions of changes in curriculum, instruction and daily practice as schools documented and incorporated the Sunshine State Standards (SSS) for science and began focusing on preparing students for the science FCAT. The survey was distributed to 265 randomly selected middle school science teachers throughout the State of Florida. Seventy-six and ninety-two percent of teachers reported increased levels of stress as a result of SBR and the science FCAT, respectively. Eighty-six percent of teachers reported loss of autonomy and control over what goes on in their classrooms, and fifty-four percent of teachers reported loss of freedom and creativity regarding curriculum and lessons. Eighty-three percent of teachers believe that increased time spent on test preparation has come at the expense of other important curricular items. By contrast, only nineteen percent of teachers believe that the science FCAT has brought about improvement in curriculum, instruction and student learning in science. Yet, twenty-five percent of teachers believe that reform efforts will improve their school. An important finding is that teachers' attitudes toward reform efforts are strongly influenced by their attitudes toward the administration at their school. Teachers who receive more support from administrators have more positive attitudes toward all aspects of SBR and the science FCAT measured in this study. Although the majority of teachers reported negative attitudes toward the reform

  6. Environmental Assessment, Eglin Air Force Base, Florida Department of Transportation. Section 6, Township 2 South, Range 26 West Eglin Air Force Base, Santa Rosa County, Florida

    Science.gov (United States)

    2005-06-03

    also known as the Sand and Gravel Aquifer) is comprised of approximately 300 feet of Pleistocene Age clastic deposits of the Citronelle Formation...flatwoods salamander breeding sites and surrounding adult habitat. Analysis of Eglin AFB land cover identified that dome swamps and depression marshes

  7. City of Freeport, Florida, State Road 20 Water Main Installation, Final Environmental Assessment, Eglin Air Force Base, Florida

    Science.gov (United States)

    2010-07-01

    canadensis Flatwoods Ecological Association Longleaf Pine Pinus palustris Wood Duck Aix sponsa Runner Oak Quercus pumila Red-winged Blackbird Agelaius...Elanoides forficatus Swallow-tailed Kite - - Eudocimus albus White Ibis LS - Falco sparverius paulus Southeastern American Kestrel LT - Haematopus

  8. Locating Air Force Base Sites History’s Legacy

    Science.gov (United States)

    2004-01-01

    Ravenstein , Air Force Combat Wings (Washington, D.C.: Office of Air Force History, 1984), (hereafter, Ravenstein ) 141–142; Mueller, 1989 edition, 467–468... Ravenstein , author checked aircraft types and bases under each bombardment and strategic wing; Knaack, 156, 200–201, 292–293. 26. Lemmer, 194. History...Goldberg, 58–89. 36. Charles A. Ravenstein , The Organization and Lineage of the United States Air Force (Washington, D.C.: Office of Air Force History

  9. Genetic Variation in Past and Current Landscapes: Conservation Implications Based on Six Endemic Florida Scrub Plants

    International Nuclear Information System (INIS)

    Menges, E.S.; Pickert, R.; Dolan, R.W.; Yahr, R.; Gordon, D.R.

    2010-01-01

    If genetic variation is often positively correlated with population sizes and the presence of nearby populations and suitable habitats, landscape proxies could inform conservation decisions without genetic analyses. For six Florida scrub endemic plants (Dicerandra frutescens, Eryngium cuneifolium, Hypericum cumulicola, Liatris ohlingerae, Nolina brittoniana, and Warea carteri), we relate two measures of genetic variation, expected heterozygosity and alleles per polymorphic locus (APL), to population size and landscape variables. Presettlement areas were estimated based on soil preferences and GIS soils maps. Four species showed no genetic patterns related to population or landscape factors. The other two species showed significant but inconsistent patterns. For Liatris ohlingerae, APL was negatively related to population density and weakly, positively related to remaining presettlement habitat within 32 km. For Nolina brittoniana, APL increased with population size. The rather weak effects of population area/size and both past and current landscape structures suggest that genetic variation needs to be directly measured and not inferred for conservation planning.

  10. Interparticle Forces and Rheology of Cement Based Suspensions

    Science.gov (United States)

    Lowke, D.

    Rheological properties of cement based suspensions are affected by the surface properties of the particles, the properties of the solvent and the adsorbed polymers. To understand the interaction between these parameters and the rheology of cement based suspensions the surface forces of the colloidal powder particles were considered. Three surface forces are taken into consideration - the attractive van der Waals forces, the repulsive double layer forces and the polymer induced steric forces. A theoretical basis for the evaluation of these forces in cement based suspension is given. Within the experimental program the superplasticizer adsorption was determined for cement and ground limestone suspensions. Rheological measurements were performed with these suspensions to determine yield stress and thixotropy. The results indicate a strong correlation between polymer adsorption, rheological properties of the suspensions and evaluated forces.

  11. Modeling calcification periods of Cytheridella ilosvayi from Florida based on isotopic signatures and hydrological data

    Directory of Open Access Journals (Sweden)

    J. Meyer

    2017-11-01

    Full Text Available The isotopic signatures of ostracod shells are the result of the temperature and composition of their host water and the phenology and ecology of the target species. Investigations addressing the influence of site-specific environmental variations on the isotopic ranges of ostracod shells are still rare but can provide important information on habitat-dependent variations and may signify a seasonally restricted timing of calcification periods. Here we present isotopic signatures (δ18Oostr, δ13Costr of living Cytheridella ilosvayi (Ostracoda and physical, chemical, and isotopic (δD, δ18Owater, δ13CDIC compositions of 14 freshwater habitats (rivers, lakes, canals, marshes, sinkholes in South Florida from winter 2013 and summer 2014. We also present instrumental data of river temperatures and δ18O of precipitation (δ18Oprec from this region. The physicochemical and isotopic compositions of the selected sites characterize the different habitats and show the influence of the source water, biological activity, and duration of exposure to the surface. Mean δ18Oostr and δ13Costr signatures of C. ilosvayi shells correlate well with the isotopic composition of their host waters. Within-sample variabilities in repeated isotopic measurements of single ostracod shells reflect habitat-dependent ranges. The similarly high range of ostracod δ18O in rivers and one marsh sample indicates that both temperature and δ18Oprec are responsible for their variation in the whole study area. Rivers and canals, which are predominantly influenced by the input and mixing of inorganic carbon from the catchment, show smaller δ13Costr ranges than the marsh dominated by local fluctuations in biological activities. Based on these observations, background data of water temperatures and δ18Oprec were used to calculate monthly δ18O variations in a theoretical calcite formed in rivers in Florida assuming a direct reaction on precipitation changes. The calculated values

  12. Athermalization in atomic force microscope based force spectroscopy using matched microstructure coupling.

    Science.gov (United States)

    Torun, H; Finkler, O; Degertekin, F L

    2009-07-01

    The authors describe a method for athermalization in atomic force microscope (AFM) based force spectroscopy applications using microstructures that thermomechanically match the AFM probes. The method uses a setup where the AFM probe is coupled with the matched structure and the displacements of both structures are read out simultaneously. The matched structure displaces with the AFM probe as temperature changes, thus the force applied to the sample can be kept constant without the need for a separate feedback loop for thermal drift compensation, and the differential signal can be used to cancel the shift in zero-force level of the AFM.

  13. ON ESTIMATING FORCE-FREENESS BASED ON OBSERVED MAGNETOGRAMS

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, X. M.; Zhang, M.; Su, J. T., E-mail: xmzhang@nao.cas.cn [Key Laboratory of Solar Activity, National Astronomical Observatories, Chinese Academy of Sciences, A20 Datun Road, Chaoyang District, Beijing 100012 (China)

    2017-01-01

    It is a common practice in the solar physics community to test whether or not measured photospheric or chromospheric vector magnetograms are force-free, using the Maxwell stress as a measure. Some previous studies have suggested that magnetic fields of active regions in the solar chromosphere are close to being force-free whereas there is no consistency among previous studies on whether magnetic fields of active regions in the solar photosphere are force-free or not. Here we use three kinds of representative magnetic fields (analytical force-free solutions, modeled solar-like force-free fields, and observed non-force-free fields) to discuss how measurement issues such as limited field of view (FOV), instrument sensitivity, and measurement error could affect the estimation of force-freeness based on observed magnetograms. Unlike previous studies that focus on discussing the effect of limited FOV or instrument sensitivity, our calculation shows that just measurement error alone can significantly influence the results of estimates of force-freeness, due to the fact that measurement errors in horizontal magnetic fields are usually ten times larger than those in vertical fields. This property of measurement errors, interacting with the particular form of a formula for estimating force-freeness, would result in wrong judgments of the force-freeness: a truly force-free field may be mistakenly estimated as being non-force-free and a truly non-force-free field may be estimated as being force-free. Our analysis calls for caution when interpreting estimates of force-freeness based on measured magnetograms, and also suggests that the true photospheric magnetic field may be further away from being force-free than it currently appears to be.

  14. Preliminary study of inphase gusts and moment force wind loads over the first 150 meters at KSC, Florida

    Science.gov (United States)

    Kaufman, J. W.

    1985-01-01

    A mathematical/statistical analysis of inphase gusts and wind velocity moment forces over the first 150 m at the Kennedy Space Center (KSC) is presented. The wind velocity profile data were acquired at the KSC 150 m ground wind tower. The results show that planetary boundary layer (PBL) winds can sustain near peak speeds for periods up to 60 sec and longer. This is proven from calculating the autocorrelation functions of moment forces for several 10 min cases of wind profile data. The results show that lower atmospheric planetary boundary layer winds have periodic variations for long periods of time. This flow characteristic is valuable as aerospace vehicle engineering and design criteria where wind loading must be determined.

  15. Circuit Design of Surface Acoustic Wave Based Micro Force Sensor

    Directory of Open Access Journals (Sweden)

    Yuanyuan Li

    2014-01-01

    Full Text Available Pressure sensors are commonly used in industrial production and mechanical system. However, resistance strain, piezoresistive sensor, and ceramic capacitive pressure sensors possess limitations, especially in micro force measurement. A surface acoustic wave (SAW based micro force sensor is designed in this paper, which is based on the theories of wavelet transform, SAW detection, and pierce oscillator circuits. Using lithium niobate as the basal material, a mathematical model is established to analyze the frequency, and a peripheral circuit is designed to measure the micro force. The SAW based micro force sensor is tested to show the reasonable design of detection circuit and the stability of frequency and amplitude.

  16. An Optimization-Based Impedance Approach for Robot Force Regulation with Prescribed Force Limits

    Directory of Open Access Journals (Sweden)

    R. de J. Portillo-Vélez

    2015-01-01

    Full Text Available An optimization based approach for the regulation of excessive or insufficient forces at the end-effector level is introduced. The objective is to minimize the interaction force error at the robot end effector, while constraining undesired interaction forces. To that end, a dynamic optimization problem (DOP is formulated considering a dynamic robot impedance model. Penalty functions are considered in the DOP to handle the constraints on the interaction force. The optimization problem is online solved through the gradient flow approach. Convergence properties are presented and the stability is drawn when the force limits are considered in the analysis. The effectiveness of our proposal is validated via experimental results for a robotic grasping task.

  17. Update to the Objective Lightning Probability Forecast Tool in use at Cape Canaveral Air Force Station, Florida

    Science.gov (United States)

    Lambert, Winifred; Roeder, William

    2013-01-01

    This conference poster describes the improvement of a set of lightning probability forecast equations that are used by the 45th Weather Squadron forecasters for their daily 1100 UTC (0700 EDT) weather briefing during the warm season months of May-September. This information is used for general scheduling of operations at Cape Canaveral Air Force Station and Kennedy Space Center. Forecasters at the Spaceflight Meteorology Group also make thunderstorm forecasts during Shuttle flight operations. Five modifications were made by the Applied Meteorology Unit: increased the period of record from 15 to 17 years, changed the method of calculating the flow regime of the day, calculated a new optimal layer relative humidity, used a new smoothing technique for the daily climatology, and used a new valid area. The test results indicated that the modified equations showed and increase in skill over the current equations, good reliability and an ability to distinguish between lightning and non-lightning days.

  18. Implementation of an Evidence-Based Exercise Program for Older Adults in South Florida

    Directory of Open Access Journals (Sweden)

    Richard C. Palmer

    2016-01-01

    Full Text Available Introduction. This study aimed to examine how well an evidence-based physical activity program could be translated for wide scale dissemination and adoption to increase physical activity among community-dwelling older adults. Methods. Between October 2009 and December 2012, reach, fidelity, dosage, ease of implementation, and barriers to translation of EnhanceFitness (EF were assessed. To assess effectiveness, a pretest-posttest design was used to measure increases in functional fitness (chair stands, arm curls, and the up-and-go test. Results. Fourteen community-based agencies offered 126 EF classes in 83 different locations and reached 4,490 older adults. Most participants were female (72%. Thirty-eight percent of participants did not complete the initial 16-week EF program. The 25% who received the recommended dose experienced an increase in upper and lower body strength and mobility. Further, participants reported high satisfaction with the program. Conclusion. EF was successfully implemented in a variety of settings throughout South Florida and reached a large number of older adults. However, challenges were encountered in ensuring that those who participated received a program dose that would lead to beneficial gains in functional fitness.

  19. Seismic force for base isolated nuclear power plants

    International Nuclear Information System (INIS)

    Yabana, Shuichi; Ishida, Katsuhiko

    1997-01-01

    In this report, dynamic and static seismic forces for base isolation system of nuclear power plants are described. First, concept of seismic force in guidelines of base isolated FBR plants, which was edited by CRIEPI in 'Verification Tests of FBR Seismic Isolation Systems' consigned from MITI, are mentioned. Second, proposed seismic spectrum is applied to ground motions in Hyogoken Nanbu Earthquake (1995). Assuming amplification factor of soil is 3, proposed seismic spectra agree with these ground motions as a result. Furthermore, calculation methods of static seismic force in which characteristics of seismic isolation systems are taken into account, are presented and the static force for Class A of nuclear power plants is compared with seismic force used in general base isolated buildings. (author)

  20. Force

    CERN Document Server

    Graybill, George

    2007-01-01

    Forces are at work all around us. Discover what a force is, and different kinds of forces that work on contact and at a distance. We use simple language and vocabulary to make this invisible world easy for students to ""see"" and understand. Examine how forces ""add up"" to create the total force on an object, and reinforce concepts and extend learning with sample problems.

  1. An ABS control logic based on wheel force measurement

    Science.gov (United States)

    Capra, D.; Galvagno, E.; Ondrak, V.; van Leeuwen, B.; Vigliani, A.

    2012-12-01

    The paper presents an anti-lock braking system (ABS) control logic based on the measurement of the longitudinal forces at the hub bearings. The availability of force information allows to design a logic that does not rely on the estimation of the tyre-road friction coefficient, since it continuously tries to exploit the maximum longitudinal tyre force. The logic is designed by means of computer simulation and then tested on a specific hardware in the loop test bench: the experimental results confirm that measured wheel force can lead to a significant improvement of the ABS performances in terms of stopping distance also in the presence of road with variable friction coefficient.

  2. Evaluation of a community-based falls prevention program in South Florida, 2008-2009.

    Science.gov (United States)

    Batra, Anamica; Melchior, Michael; Seff, Laura; Frederick, Newman; Palmer, Richard C

    2012-01-01

    Many older adults experience fear of falling, which may reduce participation in routine activities. A Matter of Balance (MOB) and Un Asunto de Equilibrio (ADE) workshops were offered in South Florida to reduce fear of falling and increase activity levels in older adults. The objectives of this study were to evaluate the effectiveness of the lay leader model of the programs in the first year of their implementation and to further report on participant outcome measures. We analyzed reach, adoption, and implementation data for participants who attended workshops between October 1, 2008, and December 31, 2009, who were aged 60 years or older, and who had both baseline and posttest outcome data. Workshops were in English and Spanish and consisted of 8 two-hour sessions. Participants completed a 7-item baseline and posttest questionnaire that consisted of a falls management scale, a social activity item, and modified version of Physician-Based Assessment and Counseling on Exercise. We analyzed outcome data on multiple characteristics using a general linear model. A class evaluation questionnaire measured participant satisfaction. Results for 562 participants who provided both baseline and posttest data showed significant improvement on 6 of 7 questions for MOB and all questions for ADE (P < .001). The 391 participants who provided evaluation data indicated that the programs were effective, beneficial, and well organized. Lay leaders successfully implemented the programs in community settings. The programs were effective in reducing fear of falling among older adults.

  3. Genetic Variation in Past and Current Landscapes: Conservation Implications Based on Six Endemic Florida Scrub Plants

    Directory of Open Access Journals (Sweden)

    Eric S. Menges

    2010-01-01

    Full Text Available If genetic variation is often positively correlated with population sizes and the presence of nearby populations and suitable habitats, landscape proxies could inform conservation decisions without genetic analyses. For six Florida scrub endemic plants (Dicerandra frutescens, Eryngium cuneifolium, Hypericum cumulicola, Liatris ohlingerae, Nolina brittoniana, and Warea carteri, we relate two measures of genetic variation, expected heterozygosity and alleles per polymorphic locus (APL, to population size and landscape variables. Presettlement areas were estimated based on soil preferences and GIS soils maps. Four species showed no genetic patterns related to population or landscape factors. The other two species showed significant but inconsistent patterns. For Liatris ohlingerae, APL was negatively related to population density and weakly, positively related to remaining presettlement habitat within 32 km. For Nolina brittoniana, APL increased with population size. The rather weak effects of population area/size and both past and current landscape structures suggest that genetic variation needs to be directly measured and not inferred for conservation planning.

  4. Circuit Design of Surface Acoustic Wave Based Micro Force Sensor

    OpenAIRE

    Yuanyuan Li; Wenke Lu; Changchun Zhu; Qinghong Liu; Haoxin Zhang; Chenchao Tang

    2014-01-01

    Pressure sensors are commonly used in industrial production and mechanical system. However, resistance strain, piezoresistive sensor, and ceramic capacitive pressure sensors possess limitations, especially in micro force measurement. A surface acoustic wave (SAW) based micro force sensor is designed in this paper, which is based on the theories of wavelet transform, SAW detection, and pierce oscillator circuits. Using lithium niobate as the basal material, a mathematical model is established ...

  5. A piezoelectric vibration-based syringe for reducing insertion force

    Science.gov (United States)

    Huang, Y. C.; Tsai, M. C.; Lin, C. H.

    2012-12-01

    Puncturing of the human skin with a needle is perhaps the most common invasive medical procedure. Clinical studies have revealed that tissue deformation and needle deflection are the primary problem for needle misplacement in percutaneous procedures. To avoid this, various techniques for reducing insertion forces during needle insertion have been considered. This paper presents a piezoelectric vibration-based syringe to reduce insertion force. AC power was applied to the piezoelectric elements to vibrate the needle with high frequency and thereby reduce the friction and cutting forces between the needle and tissue. Vibration mode shapes of the needle were observed by finite element analysis and verified by experimental results. Effects of reducing insertion force via the vibrating needle were also confirmed by inserting the needle into the porcine tissues. The proposed syringe, which minimizes the insertion force and overcomes limitations of needle materials, can be widely utilized in robot-assisted needle insertion systems.

  6. Environmental Assessment for Mid-Bay Bridge Connector, Eglin Air Force Base, Florida

    Science.gov (United States)

    2008-12-05

    blanketed by up to 250 feet of primarily non-marine quartz sands with some gravel and relatively thin clay lenses of the Citronelle Formation. The...distribution and character of the Citronelle sediments suggest that they are coalescent deposits of several early rivers that emptied into the Gulf of...units are found in the Citronelle Formation. One is a gray, massive, plastic clay that contains only a small amount of quartz sand. The other unit is

  7. Environmental Assessment for MILCON Fitness Center and Fitness Training Area, Eglin Air Force Base, Florida

    Science.gov (United States)

    2010-06-01

    Sands, the Citronelle Fmmation, the Intracoastal Fmmation!Alum Bluff Formation, the Bmce Creek Limestone, the Chattahoochee-Chickasawhay Limestone... Citronelle Formation Alum BluffUndiffereotiated 50 -25 275 ------------------ Intracoastal F ormatioo 325 -300 40 Bruce Creek Limestone -----------·- 365...levels fluctuated_ Pa1t of the sand represents reworked Miocene and Pliocene deposits, such as the Miocene coarse clastics and the Citronelle

  8. Environmental Assessment: Proposed Deactivation and Closure of Federal Prison Camp Eglin Air Force Base, Florida

    Science.gov (United States)

    2005-12-01

    results from past events in which ancient seas eroded into the Citronelle Highlands (Western Highlands) and produced the Coastal Plain. The Western...rectangular pattern is a function of differing lithologies of the Citronelle formation. Ponds of varying types and sized exist within the boundaries of the...Western Highlands and the Gulf Coastal Lowlands. The division results from past events in which ancient seas eroded into the Citronelle Highlands

  9. Final Environmental Assessment for Long-Term Vegetation Control for Eglin Air Force Base, Florida

    Science.gov (United States)

    2008-07-14

    consists of the Citronelle formation and marine terrace deposits. Although the aquifer is composed of clean, fine-to-coarse sand and gravel, locally it...Contains or Adjacent to Known Breeding Ponds .. Contains or Adjacent to Dome Swamp/Depression Marsh Flatwoods Salamander Potential Habitat...marshes, floodplain marshes, wet flatwoods, and dome swamps. 8 9 In open water and seagrass bed habitats, fish species are abundant and include

  10. Final Environmental Assessment for Advanced Littoral Reconnaissance Technologies (ALRT) Project at Eglin Air Force Base, Florida

    Science.gov (United States)

    2008-05-28

    1995. Movements and submergence !Patterns of Kemp’s ridley turtles (Lepidochelys kempii). Journal of Herpetology 29: 370-374. Ross, J.P. 1979...sea turtles at the Mansfield Channel, Texas. Journal of Herpetology 28:491-497. Simpfendorfer, C.A. 2002. Smalltooth sawfish: The USA’s first

  11. Environmental Assessment of Installation Development at MacDill Air Force Base, Florida

    Science.gov (United States)

    2013-04-18

    Species Potentially Occurring On or Near MacDill AFB Common Name Scientific Name Federal Status State Status Notes Amphibians/ Reptiles American...species (e.g., birds) would be expected to recover faster than more sedentary species (e.g., reptiles ); however, wildlife species in the proposed project...HABS III 5 NOAA 1941 NRHP Eligible as part of MacDill Field Historic District and individually, 1993 HABS 6 Joint Intelligence Center 1953 Not

  12. Environmental Assessment for Ecosystem Restoration Masterplan Implementation at MacDill Air Force Base, Florida

    Science.gov (United States)

    2013-05-01

    1,000-foot long concrete touchdown zones with asphalt between them. The Proposed Action would occur in the vicinity of the southeastern portion of...Restoration Sites would not result in any increase in impermeable surfaces and would not reduce local groundwater recharge capabilities...floodplain. However, implementation of the Proposed Action would not result in any increases in impermeable surfaces and would restore the natural

  13. Supplemental Environmental Impact Statement for F-35 Beddown at Eglin Air Force Base, Florida

    Science.gov (United States)

    2014-06-26

    The addition of impermeable surfaces (e.g., concrete , asphalt) would result in an increase in stormwater runoff. For the JSF beddown No Action...discarded materials generally not soluble in water (steel, glass, brick, concrete , asphalt, etc.). 3.10.2 Region of Influence The ROI for solid...C&D debris includes materials such as construction materials for buildings, concrete and asphalt rubble, and land-clearing debris. Sampling studies

  14. Final Environmental Assessment for Shared Use Paths (SUP), Eglin Air Force Base, Florida

    Science.gov (United States)

    2011-07-01

    Memoria l Dr Griffin Way...StEglin Blvd Memoria l Dr Griffin Way Nomad Way Eglin B lvd FL HW Y 8 5 Chinquapin Dr Perimeter Rd VALPARISO Park Tunn el Taxiw ay PT A rea Com miss ary...34/ "/ "/ "/ "/ "/ "/ "/ "/ "/ "/ Eighth StEglin Blvd Memoria l Dr Griffin Way Nomad Way 12th Ave FL H WY 85 Eglin B lvd FL HW Y 8 5 Chinquapin Dr Perimeter Rd SHALIMAR VALPARISO

  15. Environmental Assessment: Improvements to Silver Flag Training Area at Tyndall Air Force Base, Florida

    Science.gov (United States)

    2013-01-01

    would be a permanent, enclosed structure approximately 2,000 square (sq) ft in size. The facility would be constructed of masonry block and would have...AFB and the Navy Coastal Systems Station are the largest contributors to the economy of the County. Tyndall AFB employs more than 4,000 military

  16. Environmental Assessment Improvements to Silver Flag Training Area at Tyndall Air Force Base, Florida

    Science.gov (United States)

    2013-08-02

    approximately 2,000 square  (sq) ft in size. The facility would be constructed of  masonry  block and would have metal roof.    2.1.7 Convert Spray Field to...mixture of military, tourism, lumbering, trades, services, manufacturing,  construction and commercial fishing. Tyndall AFB and the  Navy  Coastal Systems

  17. Effects of Uranium Oxides on Some of the Algae Native to Eglin Air Force Base, Florida.

    Science.gov (United States)

    1982-06-01

    ident- ified and verified by comparison with type specimens in the Herbarium of the Academy of Natural Sciences in Philadelphia (Table 2). Twenty-three...AFATL-TR-82-40 4. TITLE (and Subtitle) TYPE OF REPORT & PERIOD COVEREDFinal Report: EFFECTS OF URANIUM OXIDES ON SOME OF THE ALGAE February 1977...temperatures, with special reference to sandstone- type uranium deposits; Econ. Geol., v. 57, pp. 137-167. Krauskopf, K. B., 1967; Introduction to Geochemistry

  18. Large Crater Repair at Silver Flag Exercise Site, Tyndall Air Force Base, Florida

    Science.gov (United States)

    2015-08-01

    15 Figure 9. Ruler for lining up wheel saw according to pavement thickness or cut depth...slab in southwest quadrant. ........................................... 64 Figure 64. Crater 2, 900 passes, medium-severity cracking ...65 Figure 66. Crater 2, 1,500 passes, medium-severity longitudinal cracking

  19. Environmental Assessment for Airfield Safety and Drainage Improvements at Patrick Air Force Base, Florida

    Science.gov (United States)

    2011-12-22

    within the canals such as black chin tilapia (exotic), mosquito fish, stingray, catfish, larval forms of amphibians, etc., dependent on water...natural areas on the Installation Protect listed species, biodiversity , wetlands, etc. AF 45 SW Instruction 32- 7001 Use full cut off, well shielded

  20. Joint Maneuver Test Range on Eglin Air Force Base, Florida Final Environmental Assessment

    Science.gov (United States)

    2009-12-14

    half of the taxiway (750 ft) would contain approximately 250 asphalt/ runner speed bumps. Each speed bump (22) would be approximately 6 ft long, 12 in...thula Snowy Egret LS - Elanoides forficatus Swallow-tailed Kite - - Eudocimus albus White Ibis LS - Falco sparverius paulus Southeastern American

  1. Environmental Assessment of the General Plan and Maintenance of Patrick Air Force Base, Florida

    Science.gov (United States)

    2012-07-17

    ing the Gulf of Mexico , the northern Caribbean, the Bahamas archipelago, and eastward to West Africa, the western Mediterranean , and the west coast...especially topminnows and sunfish provide this bird’s primary diet . Feeding often occurs in water 6 to 10 inches deep where a stork can probe the...and Service 199lb). Within the western Atlantic, loggerheads also nest in Mexico and the Caribbean. The loggerhead sea turtle grows to an average

  2. Environmental Assessment for Integrated Natural Resources Management Plan Activities at Eglin Air Force Base, Florida

    Science.gov (United States)

    2013-01-28

    NEPA National Environmental Policy Act NMFS National Marine Fisheries Service NOAA National Oceanic and Atmospheric Administration LIST OF...Preservation Officer SLAMS State and Local Air Monitoring Station SMZ special management zone SO2 sulfur dioxide SOx sulfur oxides SRI Santa Rosa Island...environment and food chain on the availability and translocation of chemical contaminants are also evaluated. Cultural Resources Potential effects

  3. Environmental Assessment for Beach Shoreline Protection at Patrick Air Force Base, Florida

    Science.gov (United States)

    2012-02-27

    and social effects, including affects on minority and low-income communities; and devise mitigation measures for significant effects on minority...environmental effects may include ecological, cultural, human health, economic, or social impacts when interrelated to impacts on the natural or physical...Hallazgo del area de anidaci6n de la tortuga "lora" Lepidochelys kempii (Garman), en la costa occidental del Golfo de Mexico (Rept., Chel.). Ciencia

  4. Installation Restoration Program. Phase II. Confirmation/Quantification. Stage I. Tyndall Air Force Base, Florida.

    Science.gov (United States)

    1984-08-01

    hazardous wastes (EPA Hazardous Waste No. K052). Although total waste quantities are believed to be small, the possibility does exist for leaching of...indicated some leaching of iron. Sample TI-SWI, upstream of the landfill, contained 68 ug/l iron. The three downstream samples contained 3,200, 2,100, and...Chill to 4"C 1 qt. glass Oil & Grease HCl to piH,2,4"C J/ /3 ’ 1 qt. glass Phenols H2S04 to pHɚ,4*C TP f - 1 1 plastic Heavy Yetals HN3 3 to pH2,4"C MW5

  5. Benthic Macro-Invertebrates of Rocky Creek, Eglin Air Force Base, Florida.

    Science.gov (United States)

    1981-10-01

    The number of shredders decreased with increasing stream order while filterers and scrapers increased. Functional group abundance and composition...area, including Rocky Creek, are generally clear with moderate to fast flowing water. The bottom substrate is generally sand with detritus and leaf ... litter collecting along the channel edges and around patches of vegetation. The three factors most significantly affecting water quality on Eglin AFB

  6. Environmental Assessment: Replacement of Subscale Drone Recovery Boat Dock at Tyndall Air Force Base, Florida

    Science.gov (United States)

    2009-12-01

    arc attached fo r your rev iew and comment. The draft EA was prepared in accordance \\\\·ith the Nat iona l Env iwnmcntal Policy Act o f 1969. as...existing dock and the con..;rn.JCiion or a rH.’ \\\\ dock in the same lo<:ati(’ll. Under the ~o 1\\cti<’n Ah~:rn< Hiv c. the ~:~isting drone r~covcry d1’d...OK 74702 Dear l’crry Cole. The draft Env ironmental Asscs~ment (I ~A) and drnfL Finding of No Significant Impact OCT 2 2 2009 ( FON Sl) for a

  7. Environmental Assessment for Construction of Radial Arm Spill Gates MacDill Air Force Base, Florida

    Science.gov (United States)

    2012-05-01

    mainly on mangrove areas. These soils are subject to tidal flooding, are very level, and poorly drained. Malabar Fine Sand is generally adjacent to...areas associated with mangroves . Malabar Fine Sand is also a hydric soil found adjacent to Myakka Fine Sand. There are no prime or unique farmland...3.11 GEOLOGY AND SOILS ........................................................................................ 66 Table of Contents Environmental

  8. Comparative Study of Nondestructive Pavement Testing, MacDill Air Force Base, Florida

    Science.gov (United States)

    1987-07-01

    HIIC 23008 26.8 17.4 65 71 D11C 23179 25.3 4.8 19 21 M7C 22896 22.7 4.9 21 23 17C 23078 22.1 9.1 41 45 F7C 22961 26.9 5.5 21 23 N3C 22840 27.5 6.9 25 27...Deflection Results for Apron i-A-I (AC/PCC) Slab Load D0 D2 LT LT adj.* AlE2 23078 11.6 8.5 74 88 A2E2 22980 13.5 6.7 50 59 - D1E2 23454 13.0 7.1 54 64

  9. Environmental Assessment of Installation Development at MacDill Air Force Base, Florida

    Science.gov (United States)

    2007-01-01

    Spiny Lobster in the Gulf of Mexico and South Atlantic; Coral and Coral Reefs of the Gulf of Mexico. Tampa, FL: Gulf of Mexico Fishery Management...Air 627-2660 Waste 627-26t0 WeUands 627-2630 ERM 627-2650 Lab 272-5157 SUBJECT: EPC REVIEW OF SAl: FU00608032659q DRAFr ENVIRONMENTAL ASSESSMENf

  10. Installation Restoration Program Records Search for Tyndall Air Force Base, Florida.

    Science.gov (United States)

    1982-06-01

    MATTS Multiple Air Target Trajectory System MEK Methyl ethyl ketone mgd million gallons per day mg/l milligrams per liter MOGAS Motor Gasoline I LIST...magnitude of potencia environmental impact. Consequently, a numerical value called a multiplier has been assigned to each factor in accordance with

  11. Range Environmental Assessment for Test Area C-52 Complex, Eglin Air Force Base, Florida

    Science.gov (United States)

    2014-10-31

    tourism in the region. Promotes and develops general business, trade, and tourism components of the state economy. Chapter 334 Transportation... Shopping Center across from PoFolks) Comfort Keepers is looking for reliable caregivers for our sen- ior clients. CNA a plus. Apply at ck340.ersp.biz...John Sims Pkwy., Parkway East Shopping Center. Hours: 8 a.m.- 5 p.m. M-F. After hours, use mail slot in our door. MAIL: Beacon Newspapers, 1181 E

  12. Maritime Strike Operations Tactics Development and Evaluation, Eglin Air Force Base, Florida. Final Environmental Assessment

    Science.gov (United States)

    2013-05-01

    Investigations of the stomach contents of leatherback sea tllltles revealed that a substantial percentage (44 percent of the 16 cases examined...pelagic stages, Kemp’s ridley sea tlutles are largely cancrivorous (crab eating), with a preference for portunid crabs (Bjomdal 1997). Stomach ...gut blockage, decreased absorption efficiency, absorption of toxins, effects of general intestinal blockage (such as local necrosis or ulceration

  13. The analysis of cable forces based on natural frequency

    Science.gov (United States)

    Suangga, Made; Hidayat, Irpan; Juliastuti; Bontan, Darwin Julius

    2017-12-01

    A cable is a flexible structural member that is effective at resisting tensile forces. Cables are used in a variety of structures that employ their unique characteristics to create efficient design tension members. The condition of the cable forces in the cable supported structure is an important indication of judging whether the structure is in good condition. Several methods have been developed to measure on site cable forces. Vibration technique using correlation between natural frequency and cable forces is a simple method to determine in situ cable forces, however the method need accurate information on the boundary condition, cable mass, and cable length. The natural frequency of the cable is determined using FFT (Fast Fourier Transform) Technique to the acceleration record of the cable. Based on the natural frequency obtained, the cable forces then can be determine by analytical or by finite element program. This research is focus on the vibration techniques to determine the cable forces, to understand the physical parameter effect of the cable and also modelling techniques to the natural frequency and cable forces.

  14. Final Environmental Assessment: Addressing An Army and Air Force Exchange Service (AAFES) Lifestyle Center at Eglin Air Force Base, Florida

    Science.gov (United States)

    2008-11-01

    strata under Eglin AFB ranges from Miocene to Recent, with the first 250 feet below surface composed of the Citronelle Formation. The Citronelle ...Formation is formed of sediments suggesting early riverine deposits that emptied into the Gulf of Mexico. The Citronelle Formation is composed of two...clay with a higher percentage of quartz sand. Underlying the Citronelle formation is the Allum Bluff Group, a Miocene- aged coarse clastic unit with

  15. Environmental Assessment: Proposed U.S. Air Force Military Family Housing Privatization Initiative Patrick Air Force Base, Florida

    Science.gov (United States)

    2008-11-03

    species such as beach star (Cyperus pedunculatus); inkberry (Scaevola plumieri), and prickly pear cactus ( Opuntia humifusa); • Native species on... Opuntia lasiacanta); • Sea oats (Chasmanthium latifolium); • Seagrape (Coccoloba uvifera); • Black mangrove (Avicennia geminans); • White...grounds maintenance, insect and disease problems are controlled by certified government technicians, or contractor pest management technicians

  16. Vehicle lateral state estimation based on measured tyre forces.

    Science.gov (United States)

    Tuononen, Ari J

    2009-01-01

    Future active safety systems need more accurate information about the state of vehicles. This article proposes a method to evaluate the lateral state of a vehicle based on measured tyre forces. The tyre forces of two tyres are estimated from optically measured tyre carcass deflections and transmitted wirelessly to the vehicle body. The two remaining tyres are so-called virtual tyre sensors, the forces of which are calculated from the real tyre sensor estimates. The Kalman filter estimator for lateral vehicle state based on measured tyre forces is presented, together with a simple method to define adaptive measurement error covariance depending on the driving condition of the vehicle. The estimated yaw rate and lateral velocity are compared with the validation sensor measurements.

  17. Vehicle Lateral State Estimation Based on Measured Tyre Forces

    Directory of Open Access Journals (Sweden)

    Ari J. Tuononen

    2009-10-01

    Full Text Available Future active safety systems need more accurate information about the state of vehicles. This article proposes a method to evaluate the lateral state of a vehicle based on measured tyre forces. The tyre forces of two tyres are estimated from optically measured tyre carcass deflections and transmitted wirelessly to the vehicle body. The two remaining tyres are so-called virtual tyre sensors, the forces of which are calculated from the real tyre sensor estimates. The Kalman filter estimator for lateral vehicle state based on measured tyre forces is presented, together with a simple method to define adaptive measurement error covariance depending on the driving condition of the vehicle. The estimated yaw rate and lateral velocity are compared with the validation sensor measurements.

  18. Flow-based Brute-force Attack Detection

    OpenAIRE

    Drašar, Martin; Vykopal, Jan; Winter, Philipp

    2013-01-01

    Brute-force attacks are a prevalent phenomenon that is getting harderto successfully detect on a network level due to increasing volume and en-cryption of network traffic and growing ubiquity of high-speed networks.Although the research in this field advanced considerably, there still remainclasses of attacks that are undetectable. In this chapter, we present sev-eral methods for the detection of brute-force attacks based on the analysisof network flows. We discuss their strengths and shortco...

  19. Force sensors based on screen-printed cantilevers

    OpenAIRE

    Lakhmi, Riadh; Debéda, Hélène; Dufour, Isabelle; Lucat, Claude

    2010-01-01

    International audience; In this paper, the design, the fabrication and the characterization of ceramic screen-printed force sensors aredescribed. They are based on the use of cantilevers with integrated piezoresistors. The choice of the materials constitutingthe cantilever and the strain gauge, so as the dimensions of the cantilever have been optimized in order to measure forces in mNrange. The sensors have been fabricated using the screenprinting technique associated with the sacrificial lay...

  20. Compartment-based hydrodynamics and water quality modeling of a northern Everglades wetland, Florida, USA

    Science.gov (United States)

    Wang, Hongqing; Meselhe, Ehab A.; Waldon, Michael G.; Harwell, Matthew C.; Chen, Chunfang

    2012-01-01

    The last remaining large remnant of softwater wetlands in the US Florida Everglades lies within the Arthur R. Marshall Loxahatchee National Wildlife Refuge. However, Refuge water quality today is impacted by pumped stormwater inflows to the eutrophic and mineral-enriched 100-km canal, which circumscribes the wetland. Optimal management is a challenge and requires scientifically based predictive tools to assess and forecast the impacts of water management on Refuge water quality. In this research, we developed a compartment-based numerical model of hydrodynamics and water quality for the Refuge. Using the numerical model, we examined the dynamics in stage, water depth, discharge from hydraulic structures along the canal, and exchange flow among canal and marsh compartments. We also investigated the transport of chloride, sulfate and total phosphorus from the canal to the marsh interior driven by hydraulic gradients as well as biological removal of sulfate and total phosphorus. The model was calibrated and validated using long-term stage and water quality data (1995-2007). Statistical analysis indicates that the model is capable of capturing the spatial (from canal to interior marsh) gradients of constituents across the Refuge. Simulations demonstrate that flow from the eutrophic and mineral-enriched canal impacts chloride and sulfate in the interior marsh. In contrast, total phosphorus in the interior marsh shows low sensitivity to intrusion and dispersive transport. We conducted a rainfall-driven scenario test in which the pumped inflow concentrations of chloride, sulfate and total phosphorus were equal to rainfall concentrations (wet deposition). This test shows that pumped inflow is the dominant factor responsible for the substantially increased chloride and sulfate concentrations in the interior marsh. Therefore, the present day Refuge should not be classified as solely a rainfall-driven or ombrotrophic wetland. The model provides an effective screening tool for

  1. Design control system of telescope force actuators based on WLAN

    Science.gov (United States)

    Shuai, Xiaoying; Zhang, Zhenchao

    2010-05-01

    With the development of the technology of autocontrol, telescope, computer, network and communication, the control system of the modern large and extra lager telescope become more and more complicated, especially application of active optics. Large telescope based on active optics maybe contain enormous force actuators. This is a challenge to traditional control system based on wired networks, which result in difficult-to-manage, occupy signification space and lack of system flexibility. Wireless network can resolve these disadvantages of wired network. Presented control system of telescope force actuators based on WLAN (WFCS), designed the control system framework of WFCS. To improve the performance of real-time, we developed software of force actuators control system in Linux. Finally, this paper discussed improvement of WFCS real-time, conceived maybe improvement in the future.

  2. Accurate fluid force measurement based on control surface integration

    Science.gov (United States)

    Lentink, David

    2018-01-01

    Nonintrusive 3D fluid force measurements are still challenging to conduct accurately for freely moving animals, vehicles, and deforming objects. Two techniques, 3D particle image velocimetry (PIV) and a new technique, the aerodynamic force platform (AFP), address this. Both rely on the control volume integral for momentum; whereas PIV requires numerical integration of flow fields, the AFP performs the integration mechanically based on rigid walls that form the control surface. The accuracy of both PIV and AFP measurements based on the control surface integration is thought to hinge on determining the unsteady body force associated with the acceleration of the volume of displaced fluid. Here, I introduce a set of non-dimensional error ratios to show which fluid and body parameters make the error negligible. The unsteady body force is insignificant in all conditions where the average density of the body is much greater than the density of the fluid, e.g., in gas. Whenever a strongly deforming body experiences significant buoyancy and acceleration, the error is significant. Remarkably, this error can be entirely corrected for with an exact factor provided that the body has a sufficiently homogenous density or acceleration distribution, which is common in liquids. The correction factor for omitting the unsteady body force, {{{ {ρ f}} {1 - {ρ f} ( {{ρ b}+{ρ f}} )}.{( {{{{ρ }}b}+{ρ f}} )}}} , depends only on the fluid, {ρ f}, and body, {{ρ }}b, density. Whereas these straightforward solutions work even at the liquid-gas interface in a significant number of cases, they do not work for generalized bodies undergoing buoyancy in combination with appreciable body density inhomogeneity, volume change (PIV), or volume rate-of-change (PIV and AFP). In these less common cases, the 3D body shape needs to be measured and resolved in time and space to estimate the unsteady body force. The analysis shows that accounting for the unsteady body force is straightforward to non

  3. Patrick Air Force Base integrated resource assessment. Volume 3, Resource assessment

    Energy Technology Data Exchange (ETDEWEB)

    Sandusky, W.F.; Parker, S.A.; King, D.A.; Wahlstrom, R.R.; Elliott, D.B.; Shankle, S.A.

    1993-12-01

    The US Air Force has tasked the Pacific Northwest Laboratory (PNL) in support of the US Department of Energy Federal Energy Management Program to identify, evaluate, and assist in acquiring all cost effective energy projects at Patrick Air Force Base (AFB). This is part of a model program that PNL is designing to support energy-use decisions in the federal sector. This report provides the results of the fossil fuel and electric energy resource opportunity (ERO) assessments performed by PNL at Patrick AFB which is located south of Cocoa Beach, Florida. It is a companion report to Volume 1, Executive Summary, and Volume.2, Baseline Detail. The results of the analyses of EROs are presented in 11 common energy end-use categories. A narrative description of each ERO is provided, including information on the installed cost, energy and dollar savings, impacts on operations and maintenance, and, when applicable, a discussion of energy supply and demand, energy security, and environmental issues. A description of the evaluation methodologies and technical and cost assumptions is also provided for each ERO. Summary tables present the cost-effectiveness of energy end-use equipment before and after the implementation of each ERO and present the results of the life-cycle cost analysis indicating the net present value and value index of each ERO.

  4. Adaptive Central Force Optimization Algorithm Based on the Stability Analysis

    Directory of Open Access Journals (Sweden)

    Weiyi Qian

    2015-01-01

    Full Text Available In order to enhance the convergence capability of the central force optimization (CFO algorithm, an adaptive central force optimization (ACFO algorithm is presented by introducing an adaptive weight and defining an adaptive gravitational constant. The adaptive weight and gravitational constant are selected based on the stability theory of discrete time-varying dynamic systems. The convergence capability of ACFO algorithm is compared with the other improved CFO algorithm and evolutionary-based algorithm using 23 unimodal and multimodal benchmark functions. Experiments results show that ACFO substantially enhances the performance of CFO in terms of global optimality and solution accuracy.

  5. System of gait analysis based on ground reaction force assessment

    Directory of Open Access Journals (Sweden)

    František Vaverka

    2015-12-01

    Full Text Available Background: Biomechanical analysis of gait employs various methods used in kinematic and kinetic analysis, EMG, and others. One of the most frequently used methods is kinetic analysis based on the assessment of the ground reaction forces (GRF recorded on two force plates. Objective: The aim of the study was to present a method of gait analysis based on the assessment of the GRF recorded during the stance phase of two steps. Methods: The GRF recorded with a force plate on one leg during stance phase has three components acting in directions: Fx - mediolateral, Fy - anteroposterior, and Fz - vertical. A custom-written MATLAB script was used for gait analysis in this study. This software displays instantaneous force data for both legs as Fx(t, Fy(t and Fz(t curves, automatically determines the extremes of functions and sets the visual markers defining the individual points of interest. Positions of these markers can be easily adjusted by the rater, which may be necessary if the GRF has an atypical pattern. The analysis is fully automated and analyzing one trial takes only 1-2 minutes. Results: The method allows quantification of temporal variables of the extremes of the Fx(t, Fy(t, Fz(t functions, durations of the braking and propulsive phase, duration of the double support phase, the magnitudes of reaction forces in extremes of measured functions, impulses of force, and indices of symmetry. The analysis results in a standardized set of 78 variables (temporal, force, indices of symmetry which can serve as a basis for further research and diagnostics. Conclusions: The resulting set of variable offers a wide choice for selecting a specific group of variables with consideration to a particular research topic. The advantage of this method is the standardization of the GRF analysis, low time requirements allowing rapid analysis of a large number of trials in a short time, and comparability of the variables obtained during different research measurements.

  6. Environmental Assessment: Installation Development at Sheppard Air Force Base, Texas

    Science.gov (United States)

    2007-05-01

    America—Division of Saint -Gobain Fiberglass Reinforcements 888 Cryovac Division—Sealed Air Corporation Flexible Packaging 750 Cingular Wireless...Affected Environment Sheppard Air Force Base, Texas 3-55 May 31, 2007 Archer County, Baylor County, Brown County, Callahan County, Clay County

  7. Analysis of a Lorentz force based vibration exciter using permanent ...

    Indian Academy of Sciences (India)

    This work presents performance analysis of a Lorentz force based noncontact vibration exciter by mounting a couple of permanent magnets on a piezoelectric stack. A conductor is attached to the structure to be excited and is placed midway between unlike poles of a couple of permanent magnets. The permanent magnets ...

  8. Model based control of dynamic atomic force microscope

    International Nuclear Information System (INIS)

    Lee, Chibum; Salapaka, Srinivasa M.

    2015-01-01

    A model-based robust control approach is proposed that significantly improves imaging bandwidth for the dynamic mode atomic force microscopy. A model for cantilever oscillation amplitude and phase dynamics is derived and used for the control design. In particular, the control design is based on a linearized model and robust H ∞ control theory. This design yields a significant improvement when compared to the conventional proportional-integral designs and verified by experiments

  9. Geothermal-resource verification for Air Force bases

    Energy Technology Data Exchange (ETDEWEB)

    Grant, P.R. Jr.

    1981-06-01

    This report summarizes the various types of geothermal energy reviews some legal uncertainties of the resource and then describes a methodology to evaluate geothermal resources for applications to US Air Force bases. Estimates suggest that exploration costs will be $50,000 to $300,000, which, if favorable, would lead to drilling a $500,000 exploration well. Successful identification and development of a geothermal resource could provide all base, fixed system needs with an inexpensive, renewable energy source.

  10. Model based control of dynamic atomic force microscope.

    Science.gov (United States)

    Lee, Chibum; Salapaka, Srinivasa M

    2015-04-01

    A model-based robust control approach is proposed that significantly improves imaging bandwidth for the dynamic mode atomic force microscopy. A model for cantilever oscillation amplitude and phase dynamics is derived and used for the control design. In particular, the control design is based on a linearized model and robust H(∞) control theory. This design yields a significant improvement when compared to the conventional proportional-integral designs and verified by experiments.

  11. Gender-based differences in Florida apple snail (Pomacea paludosa) movements

    Science.gov (United States)

    Valentine-Darby, P. L.; Darby, P.C.; Percival, H.F.

    2011-01-01

    Gastropod movements have been studied in the context of habitat selection, finding food and mates, and avoiding predation. Many of these studies were conducted in the laboratory, where constraints on spatial scale influence behavior. We conducted a field study of Florida apple snail (Pomacea paludosa) movements using telemetry. We hypothesized that Florida apple snail movements were driven by reproductive activity, and that gender differences would be evident. We documented male and female directions and distances traveled. We also conducted a trapping study that included conspecific bait to test if the presence of females attracted more males as measured by M:F ratios in traps. The greatest distances traveled were by males, and males were more likely to maintain a consistent bearing compared to females. Male distances peaked in what typically corresponds to peak breeding season. M:F ratios in traps were positively associated with reproductive activity in the study population as measured by egg cluster counts. Conspecific bait had no effect on the number of males or females captured. However, if a female crawled into the trap, we observed greater numbers of males compared to those with no trapped females. Males may have tracked females to increase mating encounters, following slime trails, as seen in other aquatic (including other Pomacea) snails. The capacity for mate finding has implications for reproductive success in the relatively low density populations often seen for Pomacea paludosa.

  12. Paleoenvironmental assessment of recent environmental changes in Florida Bay, USA: a biomarker based study

    Science.gov (United States)

    Xu, Y.; Holmes, C.W.; Jaffe, R.

    2007-01-01

    The extractable lipid compositions in four Florida Bay cores were determined in order to understand environmental changes over the last 160 years. The most significant environmental change was recorded by oscillations in the amplitude and frequency of biomarkers during the 20th century. Two seagrass molecular proxies (Paq and the C25/C27n-alkan-2-one ratio) reached a maximum post 1900, suggesting that abundant seagrass communities existed during the 20th century. A sharp drop in the Paq value from 0.65 to 0.48 in the central Bay at about 1987 seems to reflect seagrass die-off. The concentrations of microbial biomarkers (C20 HBIs, C25 HBIs and dinosterol) substantially increased after 1950 in the TC, BA and NB cores, reflecting an increase in algal (planktonic organism) primary productivity. However, the RB core presented the highest abundance of C25 HBIs and dinosterol during the period of 1880–1940, suggesting historically large inputs from diatoms and dinoflagellates. A substantial rise in abundance of taraxerol (a specific biomarker of mangroves) from 20 μg/g TOC in the 1830s to 279 μg/g TOC in the l980s is likely a result of increased mangrove primary productivity along the shore of the NE Bay. These changes are most likely the result of hydrological alterations in South Florida.

  13. Statistical Short-Range Guidance for Peak Wind Speed Forecasts at Edwards Air Force Base, CA

    Science.gov (United States)

    Dreher, Joseph G.; Crawford, Winifred; Lafosse, Richard; Hoeth, Brian; Burns, Kerry

    2009-01-01

    The peak winds near the surface are an important forecast element for space shuttle landings. As defined in the Flight Rules (FR), there are peak wind thresholds that cannot be exceeded in order to ensure the safety of the shuttle during landing operations. The National Weather Service Spaceflight Meteorology Group (SMG) is responsible for weather forecasts for all shuttle landings, and is required to issue surface average and 10-minute peak wind speed forecasts. They indicate peak winds are a challenging parameter to forecast. To alleviate the difficulty in making such wind forecasts, the Applied Meteorology Unit (AMU) developed a PC-based graphical user interface (GUI) for displaying peak wind climatology and probabilities of exceeding peak wind thresholds for the Shuttle Landing Facility (SLF) at Kennedy Space Center (KSC; Lambert 2003). However, the shuttle occasionally may land at Edwards Air Force Base (EAFB) in southern California when weather conditions at KSC in Florida are not acceptable, so SMG forecasters requested a similar tool be developed for EAFB.

  14. Eielson Air Force Base Operable Unit 2 baseline risk assessment

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, R.E.; Jarvis, T.T.; Jarvis, M.R.; Whelan, G.

    1994-10-01

    Operable Unit 2 at Eielson Air Force Base (AFB) near Fairbanks, is one of several operable units characterized by petroleum, oil, and lubricant contamination, and by the presence of organic products floating at the water table, as a result of Air Force operations since the 1940s. The base is approximately 19,270 acres in size, and comprises the areas for military operations and a residential neighborhood for military dependents. Within Operable Unit 2, there are seven source areas. These source areas were grouped together primarily because of the contaminants released and hence are not necessarily in geographical proximity. Source area ST10 includes a surface water body (Hardfill Lake) next to a fuel spill area. The primary constituents of concern for human health include benzene, toluene, ethylbenzene, and xylenes (BTEX). Monitored data showed these volatile constituents to be present in groundwater wells. The data also showed an elevated level of trace metals in groundwater.

  15. Florida's forests-2005 update

    Science.gov (United States)

    Mark J. Brown

    2007-01-01

    This bulletin highlights principal findings of an annual inventory of Florida's forests. Data summaries are based on measurements of 60 percent of the plots in the State. Additional data summaries and bulletins will be published as the remaining plots are measured.

  16. Vortex network community based reduced-order force model

    Science.gov (United States)

    Gopalakrishnan Meena, Muralikrishnan; Nair, Aditya; Taira, Kunihiko

    2017-11-01

    We characterize the vortical wake interactions by utilizing network theory and cluster-based approaches, and develop a data-inspired unsteady force model. In the present work, the vortical interaction network is defined by nodes representing vortical elements and the edges quantified by induced velocity measures amongst the vortices. The full vorticity field is reduced to a finite number of vortical clusters based on network community detection algorithm, which serves as a basis for a skeleton network that captures the essence of the wake dynamics. We use this reduced representation of the wake to develop a data-inspired reduced-order force model that can predict unsteady fluid forces on the body. The overall formulation is demonstrated for laminar flows around canonical bluff body wake and stalled flow over an airfoil. We also show the robustness of the present network-based model against noisy data, which motivates applications towards turbulent flows and experimental measurements. Supported by the National Science Foundation (Grant 1632003).

  17. Environmental Assessment for Shoreline Stabilization at Langley Air Force Base, Virginia

    National Research Council Canada - National Science Library

    Dischner, David M; Lingner, David; Rock, Howard B; Combs, Jennifer; Brandenburg, Catherine

    2006-01-01

    The United States Air Force (Air Force), 1st Fighter Wing (1 FW) proposes to implement various methods to stabilize the shoreline at several locations along the Back River waterfront at Langley Air Force Base (AFB...

  18. The South Florida Ecosystem Portfolio Model - A Map-Based Multicriteria Ecological, Economic, and Community Land-Use Planning Tool

    Science.gov (United States)

    Labiosa, William B.; Bernknopf, Richard; Hearn, Paul; Hogan, Dianna; Strong, David; Pearlstine, Leonard; Mathie, Amy M.; Wein, Anne M.; Gillen, Kevin; Wachter, Susan

    2009-01-01

    The South Florida Ecosystem Portfolio Model (EPM) prototype is a regional land-use planning Web tool that integrates ecological, economic, and social information and values of relevance to decision-makers and stakeholders. The EPM uses a multicriteria evaluation framework that builds on geographic information system-based (GIS) analysis and spatially-explicit models that characterize important ecological, economic, and societal endpoints and consequences that are sensitive to regional land-use/land-cover (LULC) change. The EPM uses both economics (monetized) and multiattribute utility (nonmonetized) approaches to valuing these endpoints and consequences. This hybrid approach represents a methodological middle ground between rigorous economic and ecological/ environmental scientific approaches. The EPM sacrifices some degree of economic- and ecological-forecasting precision to gain methodological transparency, spatial explicitness, and transferability, while maintaining credibility. After all, even small steps in the direction of including ecosystem services evaluation are an improvement over current land-use planning practice (Boyd and Wainger, 2003). There are many participants involved in land-use decision-making in South Florida, including local, regional, State, and Federal agencies, developers, environmental groups, agricultural groups, and other stakeholders (South Florida Regional Planning Council, 2003, 2004). The EPM's multicriteria evaluation framework is designed to cut across the objectives and knowledge bases of all of these participants. This approach places fundamental importance on social equity and stakeholder participation in land-use decision-making, but makes no attempt to determine normative socially 'optimal' land-use plans. The EPM is thus a map-based set of evaluation tools for planners and stakeholders to use in their deliberations of what is 'best', considering a balancing of disparate interests within a regional perspective. Although

  19. Florida Health Professions Education Profiles.

    Science.gov (United States)

    Florida State Postsecondary Education Planning Commission, Tallahassee.

    This report presents the results of a review of health professions education in Florida and the social and economic forces affecting the supply and demand for health professionals in the state. Individual sections focus on medicine, dentistry, veterinary medicine, pharmacy, public health, nursing, physician assistantship, physical therapy,…

  20. Environmental Assessment: General Plan-Based Environmental Impact Analysis Process, Laughlin Air Force Base

    Science.gov (United States)

    2007-05-01

    BASED ENVIROMENTAL IMPACT ANALYSIS PROCESS LAUGHLIN AIR FORCE BASE, TEXAS AGENCY: 47th Flying Training Wing (FTW), Laughlin Air Force Base (AFB), Texas...in their decision-making process. The President’s Council on Environmental Quality (CEQ) has issued regulations to implement NEPA that include...Order (EO) 12898, Federal Actions to Address Environmental Justice in Minority Populations and Low-Income Populations, was issued by the President on

  1. Estimating dynamic external hand forces during manual materials handling based on ground reaction forces and body segment accelerations.

    Science.gov (United States)

    Faber, Gert S; Chang, Chien-Chi; Kingma, Idsart; Dennerlein, Jack T

    2013-10-18

    Direct measurement of hand forces during assessment of manual materials handling is infeasible in most field studies and some laboratory studies (e.g., during patient handling). Therefore, this study proposed and evaluated the performance of a novel hand force estimation method based on ground reaction forces (GRFs) and body segment accelerations. Ten male subjects performed a manual lifting/carrying task while an optoelectronic motion tracking system measured 3D full body kinematics, a force plate measured 3D GRFs and an instrumented box measured 3D hand forces. The estimated 3D hand forces were calculated by taking the measured GRF vector and subtracting the force vectors due to weight and acceleration of all body segments. Root-mean-square difference (RMSD) between estimated and measured hand forces ranged from 11 to 27N. When ignoring the segment accelerations (just subtracting body weight from the GRFs), the hand force estimation errors were much higher, with RMSDs ranging from 21 to 101N. Future studies should verify the performance of the proposed hand force estimation method when using an ambulatory field measurement system. © 2013 Elsevier Ltd. All rights reserved.

  2. Atomic force microscopy-based shape analysis of heart mitochondria.

    Science.gov (United States)

    Lee, Gi-Ja; Park, Hun-Kuk

    2015-01-01

    Atomic force microscopy (AFM) has become an important medical and biological tool for the noninvasive imaging of cells and biomaterials in medical, biological, and biophysical research. The major advantages of AFM over conventional optical and electron microscopes for bio-imaging include the facts that no special coating is required and that imaging can be done in all environments-air, vacuum, or aqueous conditions. In addition, it can also precisely determine pico-nano Newton force interactions between the probe tip and the sample surface from force-distance curve measurements.It is widely known that mitochondrial swelling is one of the most important indicators of the opening of the mitochondrial permeability transition (MPT) pore. As mitochondrial swelling is an ultrastructural change, quantitative analysis of this change requires high-resolution microscopic methods such as AFM. Here, we describe the use of AFM-based shape analysis for the characterization of nanostructural changes in heart mitochondria resulting from myocardial ischemia-reperfusion injury.

  3. OneFlorida Clinical Research Consortium: Linking a Clinical and Translational Science Institute With a Community-Based Distributive Medical Education Model.

    Science.gov (United States)

    Shenkman, Elizabeth; Hurt, Myra; Hogan, William; Carrasquillo, Olveen; Smith, Steven; Brickman, Andrew; Nelson, David

    2018-03-01

    Developing a national pragmatic clinical trial infrastructure is central to understanding the effectiveness of interventions applied under usual conditions and where people receive health care. To address this challenge, three Florida universities-the University of Florida Clinical and Translational Science Institute, Florida State University (with its community-based distributive medical education model), and the University of Miami-created (2010-2013) a statewide consortium, the OneFlorida Clinical Research Consortium, to support the conduct of pragmatic clinical trials and provide mentored research experiences for medical and graduate students in real-world practice settings. OneFlorida has four programs, which report to a steering committee with membership from each partner, community members, and the state Medicaid agency and Department of Health to ensure shared governance. The Clinical Research Program provides support to conduct research in the network and uses champions to engage community clinicians. The Citizen Scientist Program has community members who provide input on health topics of importance to them, study design, recruitment and retention strategies, and the interpretation of findings. The Data Trust Program contains electronic health record and health care claims data for 10.6 million Floridians. The Minority Education Program, in collaboration with three historically black colleges and universities, offers minority junior faculty mentoring in pragmatic clinical trials and implementation science. OneFlorida has implemented 27 studies with diverse patient populations and in diverse community practice settings. To identify evidence-based best practices from the clinical trials conducted in the network, foster their implementation, and expand research training opportunities.

  4. Atomic force microscopy-based characterization and design of biointerfaces

    Science.gov (United States)

    Alsteens, David; Gaub, Hermann E.; Newton, Richard; Pfreundschuh, Moritz; Gerber, Christoph; Müller, Daniel J.

    2017-03-01

    Atomic force microscopy (AFM)-based methods have matured into a powerful nanoscopic platform, enabling the characterization of a wide range of biological and synthetic biointerfaces ranging from tissues, cells, membranes, proteins, nucleic acids and functional materials. Although the unprecedented signal-to-noise ratio of AFM enables the imaging of biological interfaces from the cellular to the molecular scale, AFM-based force spectroscopy allows their mechanical, chemical, conductive or electrostatic, and biological properties to be probed. The combination of AFM-based imaging and spectroscopy structurally maps these properties and allows their 3D manipulation with molecular precision. In this Review, we survey basic and advanced AFM-related approaches and evaluate their unique advantages and limitations in imaging, sensing, parameterizing and designing biointerfaces. It is anticipated that in the next decade these AFM-related techniques will have a profound influence on the way researchers view, characterize and construct biointerfaces, thereby helping to solve and address fundamental challenges that cannot be addressed with other techniques.

  5. MILITARY BASE CLOSURES: Questions Concerning the Proposed Sale of Housing at Mather Air Force Base

    National Research Council Canada - National Science Library

    1998-01-01

    This report responds to your request that we review the proposed negotiated sale of 1,271 surplus family housing units at Mather Air Force Base, California, to the Sacramento Housing and Redevelopment Agency (SHRA...

  6. Eielson Air Force Base OU-1 baseline risk assessment

    Energy Technology Data Exchange (ETDEWEB)

    Jarvis, M.T.; Jarvis, T.T.; Van Houten, N.C.; Lewis, R.E.

    1993-09-01

    This Baseline Risk Assessment report is the second volume in a set of three volumes for operable Unit 1 (OU-1). The companion documents contain the Remedial Investigation and the Feasibility Study. Operable Unit 1 (OU-1) is one of several groups of hazardous waste sites located at Eielson Air Force Base (AFB) near Fairbanks, Alaska. The operable units at Eielson are typically characterized by petroleum, oil, lubricant/solvent contamination, and by the presence of organics floating at the water table. In 1989 and 1990, firms under contract to the Air Force conducted field studies to gather information about the extent of chemical contamination in soil, groundwater, and soil air pore space (soil gas) at the site. This report documents the results of a baseline risk assessment, which uses the 1989 and 1991 site characterization database to quantify the potential human health risk associated with past Base industrial activities in the vicinity of OU-1. Background data collected in 1992 were also used in the preparation of this report.

  7. Eielson Air Force Base OU-1 baseline risk assessment

    International Nuclear Information System (INIS)

    Jarvis, M.T.; Jarvis, T.T.; Van Houten, N.C.; Lewis, R.E.

    1993-09-01

    This Baseline Risk Assessment report is the second volume in a set of three volumes for operable Unit 1 (OU-1). The companion documents contain the Remedial Investigation and the Feasibility Study. Operable Unit 1 (OU-1) is one of several groups of hazardous waste sites located at Eielson Air Force Base (AFB) near Fairbanks, Alaska. The operable units at Eielson are typically characterized by petroleum, oil, lubricant/solvent contamination, and by the presence of organics floating at the water table. In 1989 and 1990, firms under contract to the Air Force conducted field studies to gather information about the extent of chemical contamination in soil, groundwater, and soil air pore space (soil gas) at the site. This report documents the results of a baseline risk assessment, which uses the 1989 and 1991 site characterization database to quantify the potential human health risk associated with past Base industrial activities in the vicinity of OU-1. Background data collected in 1992 were also used in the preparation of this report

  8. Ground-water contamination at Wurtsmith Air Force Base, Michigan

    Science.gov (United States)

    Stark, J.R.; Cummings, T.R.; Twenter, F.R.

    1983-01-01

    A sand and gravel aquifer of glacial origin underlies Wurtsmith Air Force Base in northeastern lower Michigan. The aquifer overlies a thick clay layer at an average depth of 65 feet. The water table is about 10 feet below land surface in the western part of the Base and about 25 feet below land surface in the eastern part. A ground-water divide cuts diagonally across the Base from northwest to southeast. South of the divide, ground water flows to the Au Sable River; north of the divide, it flows to Van Etten Creek and Van Etten Lake. Mathematical models were used to aid in calculating rates of groundwater flow. Rates range from about 0.8 feet per day in the eastern part of the Base to about 0.3 feet per day in the western part. Models also were used as an aid in making decisions regarding purging of contaminated water from the aquifer. In 1977, trichloroethylene was detected in the Air Force Base water-supply system. It had leaked from a buried storage tank near Building 43 in the southeastern part of the Base and moved northeastward under the influence of the natural ground-water gradient and the pumping of Base water-supply wells. In the most highly contaminated part of the plume, concentrations are greater than 1,000 micrograms per liter. Current purge pumping is removing some of the trichloroethylene, and seems to have arrested its eastward movement. Pumping of additional purge wells could increase the rate of removal. Trichloroethylene has also been detected in ground water in the vicinity of the Base alert apron, where a plume from an unknown source extends northeastward off Base. A smaller, less well-defined area of contamination also occurs just north of the larger plume. Trichloroethylene, identified near the waste-treatment plant, seepage lagoons, and the northern landfill area, is related to activities and operations in these areas. Dichloroethylene and trichloroethylene occur in significant quantities westward of Building 43, upgradient from the major

  9. Feedback Control of Floor Reaction Force Based on Force-Reflecting-Type Multilateral Control

    Science.gov (United States)

    Nagase, Kazuki; Katsura, Seiichiro

    Real-world haptics is being studied not only for improving feedback on real-world haptic information in teleoperation but also for developing key technologies for future human support. For the remote operating of systems at distant places, haptic information is required in addition to visual information. The haptic information around a work environment can be the floor reaction force, which can be obtained using a movement-type haptic device. The floor reaction force from the environment that the mobile haptic device touches is fed back accurately to the operator. First, this paper proposes a general force-reflecting-type multilateral control. Second, this paper extends the control to feedback control of the floor reaction force by using force-reflecting-type multilateral control and a novel haptic device employing a biped robot with a slave system. The position response of a master system is transformed to a leg tip position command for the biped-type haptic device. In addition, the floor reaction force determined by the biped-type haptic device is fed back to the master system. The proposed method can determine the force feedback to the sole of the foot, which is not possible with a conventional stationary system. As a result, the floor reaction force from a large area can be obtained, and the operability of the control system is improved by using the proposed system.

  10. Air Power: Meeting the Challenges of the 21st Century. A National Symposium Sponsored by the Air Force Association, February 23-24, 1995, Orlando, Florida

    National Research Council Canada - National Science Library

    1995-01-01

    On May 1, 1956, the Air Force Association established the Aerospace Educational Foundation supports a range of educational and scholarship programs nationwide, which are of special interest to AFA members. As a 501 (c)(3...

  11. err aA spatial evaluation of socio demographics surrounding National Priorities List sites in Florida using a distance-based approach

    Directory of Open Access Journals (Sweden)

    Kiros Gebre-Egziabher

    2009-06-01

    Full Text Available Abstract Background Over the last two decades, various spatial techniques have been demonstrated using geographical information systems (GIS to adequately estimate and characterize inequities of minority populations living near environmentally hazardous facilities. However, these methods have produced mixed results. In this study, we use recently developed variations of the "distance based" approach to spatially evaluate and compare demographic and socioeconomic disparities surrounding the worst hazardous waste sites in Florida. Methods We used data from the 2000 US Census Bureau and the Florida Department of Environmental Protection to identify selected socio and economic variables within one (1 mile of 71 National Priorities List (NPL or Superfund sites in Florida. ArcMap (ESRI, v. 9.2 was used to map the centroid locations of each of the NPL sites as well as identify and estimate the number of host and non-host tracts. The unit of analysis in this study was at the census tract level. Logistic regression (SAS v9.1.3 was used to determine if race/ethnicity and socioeconomic indicators are significant predictors of the location of NPL sites. Results There were significant differences in race/ethnicity composition and socio-economic factors between NPL host census tracts and non-host census tracts in Florida. The percentages of Blacks (OR = 5.7, p Conclusion The recently developed distance-based method supports previous studies and suggests that race and ethnicity play substantial roles in where hazardous facilities are located in Florida. Recommendations include using distance-based methods to evaluate socio and demographic characteristics surrounding other less known environmental hazardous facilities, such as landfills, or Toxic Release Inventory (TRI sites.

  12. Florida Hydrogen Initiative

    Energy Technology Data Exchange (ETDEWEB)

    Block, David L

    2013-06-30

    The Florida Hydrogen Initiative (FHI) was a research, development and demonstration hydrogen and fuel cell program. The FHI program objectives were to develop Florida?s hydrogen and fuel cell infrastructure and to assist DOE in its hydrogen and fuel cell activities The FHI program funded 12 RD&D projects as follows: Hydrogen Refueling Infrastructure and Rental Car Strategies -- L. Lines, Rollins College This project analyzes strategies for Florida's early stage adaptation of hydrogen-powered public transportation. In particular, the report investigates urban and statewide network of refueling stations and the feasibility of establishing a hydrogen rental-car fleet based in Orlando. Methanol Fuel Cell Vehicle Charging Station at Florida Atlantic University ? M. Fuchs, EnerFuel, Inc. The project objectives were to design, and demonstrate a 10 kWnet proton exchange membrane fuel cell stationary power plant operating on methanol, to achieve an electrical energy efficiency of 32% and to demonstrate transient response time of less than 3 milliseconds. Assessment of Public Understanding of the Hydrogen Economy Through Science Center Exhibits, J. Newman, Orlando Science Center The project objective was to design and build an interactive Science Center exhibit called: ?H2Now: the Great Hydrogen Xchange?. On-site Reformation of Diesel Fuel for Hydrogen Fueling Station Applications ? A. Raissi, Florida Solar Energy Center This project developed an on-demand forecourt hydrogen production technology by catalytically converting high-sulfur hydrocarbon fuels to an essentially sulfur-free gas. The removal of sulfur from reformate is critical since most catalysts used for the steam reformation have limited sulfur tolerance. Chemochromic Hydrogen Leak Detectors for Safety Monitoring ? N. Mohajeri and N. Muradov, Florida Solar Energy Center This project developed and demonstrated a cost-effective and highly selective chemochromic (visual) hydrogen leak detector for safety

  13. Differential Impacts of Land-Based Sources of Pollution on the Microbiota of Southeast Florida Coral Reefs.

    Science.gov (United States)

    Staley, Christopher; Kaiser, Thomas; Gidley, Maribeth L; Enochs, Ian C; Jones, Paul R; Goodwin, Kelly D; Sinigalliano, Christopher D; Sadowsky, Michael J; Chun, Chan Lan

    2017-05-15

    Coral reefs are dynamic ecosystems known for decades to be endangered due, in large part, to anthropogenic impacts from land-based sources of pollution (LBSP). In this study, we utilized an Illumina-based next-generation sequencing approach to characterize prokaryotic and fungal communities from samples collected off the southeast coast of Florida. Water samples from coastal inlet discharges, oceanic outfalls of municipal wastewater treatment plants, treated wastewater effluent before discharge, open ocean samples, and coral tissue samples (mucus and polyps) were characterized to determine the relationships between microbial communities in these matrices and those in reef water and coral tissues. Significant differences in microbial communities were noted among all sample types but varied between sampling areas. Contamination from outfalls was found to be the greatest potential source of LBSP influencing native microbial community structure among all reef samples, although pollution from inlets was also noted. Notably, reef water and coral tissue communities were found to be more greatly impacted by LBSP at southern reefs, which also experienced the most degradation during the course of the study. The results of this study provide new insights into how microbial communities from LBSP can impact coral reefs in southeast Florida and suggest that wastewater outfalls may have a greater influence on the microbial diversity and structure of these reef communities than do contaminants carried in runoff, although the influences of runoff and coastal inlet discharge on coral reefs are still substantial. IMPORTANCE Coral reefs are known to be endangered due to sewage discharge and to runoff of nutrients, pesticides, and other substances associated with anthropogenic activity. Here, we used next-generation sequencing to characterize the microbial communities of potential contaminant sources in order to determine how environmental discharges of microbiota and their genetic

  14. Environmental Assessment for Proposed Security Forces Operations Facility, Buckley Air Force Base, Colorado

    National Research Council Canada - National Science Library

    Meyer, Elizabeth; Myklebust, Jessica; Denier, James; Christner, Jennifer; Fontaine, Kathyrn

    2006-01-01

    The United States Air Force (USAF) has prepared this EA in accordance with the National Environmental Policy Act to evaluate the potential environmental and social impacts from the construction and operation of the proposed SFOF...

  15. Supplemental Environmental Assessment:VTRS Fiber Optic Cable Installation on South Base Vandenberg Air Force Base, California

    Science.gov (United States)

    2007-11-08

    Vandenberg Air Force base, California 2003-08 E-3961 Owen and Lebow 2003, Archaeological Survey for Proposed Wind Farm South Vandenberg Air Force Base...ebow, C.G., and R.L. McKim. 1997. Cultural Resources Condition on Vandenberg Air Force Base Fiscal Year 1997: Zones rks, Inc., Fresno , California , for...Force Base, California . (VAFB- 1990-11) Owen, V.A., and C.G. Lebow. 2003. Archaeological Survey for the Proposed Wind Farm South Vandenberg Air

  16. Sitewide feasibility study Eielson Air Force Base, Alaska

    Energy Technology Data Exchange (ETDEWEB)

    Last, G.V.; Lanigan, D.C.; Josephson, G.B.; Bagaasen, L.M.

    1995-09-01

    The Sitewide Feasibility Study (FS) is required under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), the National Contingency Plan (NCP), and the Federal Facility Agreement (FFA) for Eielson Air Force Base (AFB). It is based on findings presented in the Sitewide Remedial Investigation (RI) Report (USAF 1995a), and the Sitewide Baseline Risk Assessment (BLRA) Report (USAF 1995b). Under the FFA, 64 potential source areas were placed in one of six operable units, based on similar contaminant and environmental characteristics, or were included for evaluation under a Source Evaluation Report (SER). The sitewide RI was directed at contamination that was not confined to an operable unit (OU) or SER source area. The objectives of the sitewide RI were to: Provide information about site characteristics to support individual OU RI/FS efforts and the sitewide RI/FS, including site hydrogeology and determination of background soil and groundwater characteristics; identify and characterize contamination that is not confined or attributable to a specific source area through sitewide monitoring of groundwater and surface water; evaluate cumulative risks to human health and the environment from contamination on a sitewide basis; and provide a mechanism for continued cohesive sitewide monitoring.

  17. Final Environmental Assessment of Construction of Emerald Coast Technology and Research Campus at the University of Florida Reserarch Engineering Education Facility at Eglin Air Force Base, Florida

    Science.gov (United States)

    2012-03-01

    nonmarine quartz sands with some gravel and relatively thin clay lenses of the Citronelle Formation. The Citronelle Formation is underlain by a...geosyncline. The geology under Site Alternatives 1 and 2 and the northern portion of Alternative 3 appear to be of the Citronelle Formation; the...and the regional Floridan Aquifer (AFMC 2006). The Sand and Gravel Aquifer consists of the Citronelle Formation and marine terrace deposits, which

  18. Impact of thermal frequency drift on highest precision force microscopy using quartz-based force sensors at low temperatures

    Directory of Open Access Journals (Sweden)

    Florian Pielmeier

    2014-04-01

    Full Text Available In frequency modulation atomic force microscopy (FM-AFM the stability of the eigenfrequency of the force sensor is of key importance for highest precision force measurements. Here, we study the influence of temperature changes on the resonance frequency of force sensors made of quartz, in a temperature range from 4.8–48 K. The sensors are based on the qPlus and length extensional principle. The frequency variation with temperature T for all sensors is negative up to 30 K and on the order of 1 ppm/K, up to 13 K, where a distinct kink appears, it is linear. Furthermore, we characterize a new type of miniaturized qPlus sensor and confirm the theoretically predicted reduction in detector noise.

  19. Final Environmental Assessment for Installation Development at Little Rock Air Force Base Arkansas

    Science.gov (United States)

    2006-10-18

    Environmental Quality ADSL average daily student load AETC Air Education and Training Command AF Air Force AFB Air Force Base AFCESA Air Force Civil...load ( ADSL ) in Fiscal Year (FY) 2010 but level back to current programmed ADSL . • U.S. Marine C-130 Training. This is the expansion of current C...American Landing Zone ADSL Average Daily Student Load AETC Air Education and Training Command AFB Air Force Base AGL above ground level AMC Air

  20. Reducing detrimental electrostatic effects in Casimir-force measurements and Casimir-force-based microdevices

    Science.gov (United States)

    Xu, Jun; Klimchitskaya, G. L.; Mostepanenko, V. M.; Mohideen, U.

    2018-03-01

    It is well known that residual electrostatic forces create significant difficulties in precise measurements of the Casimir force and the wide use of Casimir-operated microdevices. We experimentally demonstrate that, with the help of Ar-ion cleaning of the surfaces, it is possible to make electrostatic effects negligibly small compared to the Casimir interaction. Our experimental setup consists of a dynamic atomic force microscope supplemented with an Ar-ion gun and argon reservoir. The residual potential difference between the Au-coated surfaces of a sphere and those of a plate was measured both before and after in situ Ar-ion cleaning. It is shown that this cleaning decreases the magnitude of the residual potential by up to an order of magnitude and makes it almost independent of the separation. The gradient of the Casimir force was measured using ordinary samples subjected to Ar-ion cleaning. The obtained results are shown to be in good agreement both with previous precision measurements using specially selected samples and with theoretical predictions of the Lifshitz theory. The conclusion is made that the suggested method of in situ Ar-ion cleaning is effective in reducing the electrostatic effects and therefore is a great resource for experiments on measuring the Casimir interaction and for Casimir-operated microdevices.

  1. Bite force measurement based on fiber Bragg grating sensor

    Science.gov (United States)

    Padma, Srivani; Umesh, Sharath; Asokan, Sundarrajan; Srinivas, Talabattula

    2017-10-01

    The maximum level of voluntary bite force, which results from the combined action of muscle of mastication, joints, and teeth, i.e., craniomandibular structure, is considered as one of the major indicators for the functional state of the masticatory system. Measurement of voluntary bite force provides useful data for the jaw muscle function and activity along with assessment of prosthetics. This study proposes an in vivo methodology for the dynamic measurement of bite force employing a fiber Bragg grating (FBG) sensor known as bite force measurement device (BFMD). The BFMD developed is a noninvasive intraoral device, which transduces the bite force exerted at the occlusal surface into strain variations on a metal plate. These strain variations are acquired by the FBG sensor bonded over it. The BFMD developed facilitates adjustment of the distance between the biting platform, which is essential to capture the maximum voluntary bite force at three different positions of teeth, namely incisor, premolar, and molar sites. The clinically relevant bite forces are measured at incisor, molar, and premolar position and have been compared against each other. Furthermore, the bite forces measured with all subjects are segregated according to gender and also compared against each other.

  2. Force Characteristics of Nickel-Titanium Spring-based Orthopedic Modules

    Directory of Open Access Journals (Sweden)

    Oonit Nakra

    2014-01-01

    Full Text Available Introduction: One of the modifications with the headgear over the years has been in replacing the extraoral elastics which undergo rapid force degradation over time with spring-based modules thus reducing patient inconvenience. Studies, in the past, have compared the force degradation of various coil spring materials used intraorally for tooth movement but a quantitative characterization of the orthopedic force modules has not been reported. Thus, the present study aims to know the level of force degradation in nickel-titanium (NiTi spring-based orthopedic force modules with time, and compare them with stainless steel (SS modules. Materials and methods: Sixty force modules: 20 NiTi and 40 (20 each from 2 companies SS spring-based, were tested for the force degradation over a period of 3 months after dividing the sample on the basis of initial force exerted into two Groups (A and B. The springs were mounted on a customized rack for 16 hours per day to simulate headgear wear by the patient. Results: Significantly greater force degradation was observed after 1 week compared to the subsequent time intervals by all the force modules except the NiTi set in Group A (300 gm initial force where the degradation was found to be greater after 1 month. Higher initial activation of the force modules resulted in a greater force degradation at all time intervals. Conclusion: NiTi force modules exerted more constant force compared to the SS modules. Force characteristics of ′similar′ force modules from different manufacturers varied.

  3. An analysis of rumor propagation based on propagation force

    Science.gov (United States)

    Zhao, Zhen-jun; Liu, Yong-mei; Wang, Ke-xi

    2016-02-01

    A propagation force is introduced into the analysis of rumor propagation to address uncertainty in the process. The propagation force is portrayed as a fuzzy variable, and a category of new parameters with fuzzy variables is defined. The classic susceptible, infected, recovered (SIR) model is modified using these parameters, a fuzzy reproductive number is introduced into the modified model, and the rationality of the fuzzy reproductive number is illuminated through calculation and comparison. Rumor control strategies are also discussed.

  4. Finding of No Significant Impact: First Air Force Air Operations Center, First Air Force Headquarters/Air Force Forces Center, and Highway 98 Overpass at Tyndall Air Force Base, Florida

    Science.gov (United States)

    2004-11-10

    fascia , standing seam metal roof, pavements, road work, site improvements, landscaping and partial renovation to building 485. The 3,437 square...building includes a reinforced concrete floor lab, structural steel frame, brick masonry fascia , standing seam metal roof, pavements, road work...the open streams, wetlands, or ditches. With respect to landscaping, plantings within the required 30-foot buffer zone of the buildings will consist

  5. Environmental Assessment for the Construction of a Community Activities Center Malmstron Air Force Base, Montana

    Science.gov (United States)

    2008-12-01

    area prior to Lewis and Clark’s Voyage of Discovery, but in 1805 the expedition’s portage around the Great Falls probably took them across what is now...on Malmstrom AFB. Malmstrom AFB conducted an architectural inventory in 1996 to identify Cold War resources. The inventory also identified a...Force Base Inventoried Wetland Sites. October. Malmstrom Air Force Base (Malmstrom AFB). 2006c. Malmstrom Air Force Base 341 SW OPLAN 32-7041 Storm

  6. Mangos of Florida, country contribution: Florida

    Science.gov (United States)

    The book chapter presents a review of the historical importance of mango in Florida; geographical distribution of mangos in Florida; statistical data including total and seasonal production, main cultivars and their descriptors; cultural practices (i.e. propagation, fertilization, pruning); pests an...

  7. Novel knowledge-based mean force potential at atomic level.

    Science.gov (United States)

    Melo, F; Feytmans, E

    1997-03-21

    We present a new approach at the atomic level for the development of knowledge-based mean force potentials (MFPs) that can be used in fold recognition, ab initio structure prediction, comparative modelling and molecular recognition. Our method is based on atom-type definitions, raising the total frequency of the pairwise distributions and leading to very accurate and specific distance-dependent energy functions. Forty different heavy atom types were defined depending on their bond connectivity, chemical nature and location level (side-chain or backbone). Using this approach it has been possible to obtain average frequencies of pairwise contacts about 15 times higher than the ones obtained using the classic way of one heavy atom definition for each amino acid (i.e. alpha-carbon, beta-carbon, virtual centroid or virtual beta-carbon co-ordinates). In this paper we use this approach to develop a MFP that can be used in fold recognition and we compare it with a classic MFP at the amino acid level compiled from the alpha-carbon distances between the different amino acid pairs. Both potentials involve all the pairwise contacts extracted from a non-redundant folds database of 180 protein chains with a sequence identity threshold of 25%. The pairwise energy functions of the MFP at the atomic level have a deep and very well defined minimum for each pairwise interaction, in contrast to the same curves obtained from the MFP developed at the amino acid level, which generally have multiple minima with similar depth. Our results also show that this MFP is able to produce very similar energy profiles for couples of proteins that share a very low sequence identity but are closely related at the structural level. When these profiles are plotted considering the structure-structure alignment, they are mostly superimposed, showing a correlation with the structure-structure similarity. In the same test, the MFP at the amino acid level fails to produce similar profiles. We suggest that

  8. Enhancing Optical Forces in InP-Based Waveguides

    DEFF Research Database (Denmark)

    Panah, Mohammad Esmail Aryaee; Semenova, Elizaveta; Lavrinenko, Andrei

    2017-01-01

    Cantilever sensors are among the most important microelectromechanical systems (MEMS), which are usually actuated by electrostatic forces or piezoelectric elements. Although well-developed microfabrication technology has made silicon the prevailing material for MEMS, unique properties of other...... materials are overlooked in this context. Here we investigate optically induced forces exerted upon a semi-insulating InP waveguide suspended above a highly doped InP: Si substrate, in three different regimes: the epsilon-near-zero (ENZ), with excitation of surface plasmon polaritons (SPPs) and phonons...

  9. Problem decomposition by mutual information and force-based clustering

    Science.gov (United States)

    Otero, Richard Edward

    The scale of engineering problems has sharply increased over the last twenty years. Larger coupled systems, increasing complexity, and limited resources create a need for methods that automatically decompose problems into manageable sub-problems by discovering and leveraging problem structure. The ability to learn the coupling (inter-dependence) structure and reorganize the original problem could lead to large reductions in the time to analyze complex problems. Such decomposition methods could also provide engineering insight on the fundamental physics driving problem solution. This work forwards the current state of the art in engineering decomposition through the application of techniques originally developed within computer science and information theory. The work describes the current state of automatic problem decomposition in engineering and utilizes several promising ideas to advance the state of the practice. Mutual information is a novel metric for data dependence and works on both continuous and discrete data. Mutual information can measure both the linear and non-linear dependence between variables without the limitations of linear dependence measured through covariance. Mutual information is also able to handle data that does not have derivative information, unlike other metrics that require it. The value of mutual information to engineering design work is demonstrated on a planetary entry problem. This study utilizes a novel tool developed in this work for planetary entry system synthesis. A graphical method, force-based clustering, is used to discover related sub-graph structure as a function of problem structure and links ranked by their mutual information. This method does not require the stochastic use of neural networks and could be used with any link ranking method currently utilized in the field. Application of this method is demonstrated on a large, coupled low-thrust trajectory problem. Mutual information also serves as the basis for an

  10. Vandenberg Air Force Base Upper Level Wind Launch Weather Constraints

    Science.gov (United States)

    Shafer, Jaclyn A.; Wheeler, Mark M.

    2012-01-01

    The 30th Operational Support Squadron Weather Flight (30 OSSWF) provides comprehensive weather services to the space program at Vandenberg Air Force Base (VAFB) in California. One of their responsibilities is to monitor upper-level winds to ensure safe launch operations of the Minuteman III ballistic missile. The 30 OSSWF tasked the Applied Meteorology Unit (AMU) to analyze VAFB sounding data with the goal of determining the probability of violating (PoV) their upper-level thresholds for wind speed and shear constraints specific to this launch vehicle, and to develop a tool that will calculate the PoV of each constraint on the day of launch. In order to calculate the probability of exceeding each constraint, the AMU collected and analyzed historical data from VAFB. The historical sounding data were retrieved from the National Oceanic and Atmospheric Administration Earth System Research Laboratory archive for the years 1994-2011 and then stratified into four sub-seasons: January-March, April-June, July-September, and October-December. The maximum wind speed and 1000-ft shear values for each sounding in each subseason were determined. To accurately calculate the PoV, the AMU determined the theoretical distributions that best fit the maximum wind speed and maximum shear datasets. Ultimately it was discovered that the maximum wind speeds follow a Gaussian distribution while the maximum shear values follow a lognormal distribution. These results were applied when calculating the averages and standard deviations needed for the historical and real-time PoV calculations. In addition to the requirements outlined in the original task plan, the AMU also included forecast sounding data from the Rapid Refresh model. This information provides further insight for the launch weather officers (LWOs) when determining if a wind constraint violation will occur over the next few hours on day of launch. The interactive graphical user interface (GUI) for this project was developed in

  11. Research on Evacuation Based on Social Force Model

    Science.gov (United States)

    Liu, W.; Deng, Z.; Li, W.; Lin, J.

    2017-09-01

    Crowded centers always cause personnel casualties in evacuation operations. Stampede events often occur by hit, squeeze and crush due to panic. It is of vital important to alleviate such situation. With the deepening of personnel evacuation research, more and more researchers are committed to study individual behaviors and self-organization phenomenon in evacuation process. The study mainly includes: 1, enrich the social force model from different facets such as visual, psychological, external force to descript more realistic evacuation; 2, research on causes and effects of self - organization phenomenon. In this paper, we focus on disorder motion that occurs in the crowded indoor publics, especially the narrow channel and safety exits and other special arteries. We put forward the improved social force model to depict pedestrians' behaviors, an orderly speed-stratification evacuation method to solve disorder problem, and shape-changed export to alleviate congestion. The result of this work shows an improvement of evacuation efficiency by 19.5 %. Guiding pedestrians' direction to slow down the influence of social forces has a guidance function in improving the efficiency of indoor emergency evacuation.

  12. Environmental Assessment for Aviation Foreign Internal Defense Beddown (AvFID) at Duke Field, Eglin Air Force Base, Florida

    Science.gov (United States)

    2012-07-01

    The Citronelle Formation is widespread in the Gulf Coastal Plain. It consists of gray to orange, often mottled, unconsolidated to poorly consolidated...very fine to very coarse, poorly sorted, clean to clayey sands (USGS 2010). The sands on the Citronelle Formation consist of approximately non...et al. 1989). Kaolinite is the primary clay found in the two types of sandy clay units forming the Citronelle Formation. Underneath these formations

  13. Final Environmental Assessment for the Disposal of the Former Lynn Haven Fuel Depot, Tyndall Air Force Base, Florida

    Science.gov (United States)

    2015-12-01

    units or formations. These formations include the Citronelle , Jackson Bluff, Intracoastal, and Bruce Creek Limestone formations. They contain...varying amounts of silt, sand, clay, and calcareous formations that vary with age and depth. The Citronelle ranges in thickness from zero to 100 feet and...by the presence of sands of the Citronelle Formation. The top of this water bearing zone is approximately 10 feet above msl. Within the LHFD

  14. Installation Restoration Program Phase 2. Confirmation/Quantification. Stage 2. Volume 2. Tyndall Air Force Base, Florida

    Science.gov (United States)

    1988-08-01

    prescribed by the Occupational Safety and Health Administracion (OSHA) and EPA, 6. The duration of potential exposure, and 7. The mitigation of potential...Volume Purged: gallons Sample Time: ___________ Sample %= bar - P I 1 a S T UP z wM S igned/ Spler: (111wa1 - l-. P eco: t S agfedi Raw iser: oat*e: M-6 I...Sample Number: 13 . .C Y CL un R M i0 I -3 I -n S Lgned/Sampler: Oate Signed/ Reviteer: 0e:: M-39 THIS PAGE INTENTIONALLY LEFT BLANK ,-40 ! I I

  15. Navy Explosive Ordnance Disposal School Master Development Plan for Test Area D-51, Eglin Air Force Base, Florida

    Science.gov (United States)

    2008-01-25

    limestone layer occurs in interconnected, intergranular pore spaces, small solution fissures , and larger solution channels and cavities. The wells on...break room and instructor lounge areas. Building construction to include: reinforced foundation slab -on-grade, concrete masonry walls, steel frame...room and instructor lounge areas. Building construction to include: reinforced foundation slab -on-grade, concrete masonry walls, steel frame structure

  16. Final Range Environmental Assessment for Test Areas C-87 and D-51 at Eglin Air Force Base, Florida

    Science.gov (United States)

    2015-05-01

    an item) intelligence gathering. The new Tactical Post Blast Course would include an applied instruction facility, vehicular storage facility, and six...Reticulated flatwoods salamander Ambystoma bishopi E Reptiles Eastern indigo snake Drymarchon couperi T Green sea turtle Chelonia mydas E Kemp’s ridley

  17. Installation Restoration Program. Phase II. Confirmation/Quantification. Stage I for MacDill Air Force Base, Florida.

    Science.gov (United States)

    1984-09-01

    teratogenic substances into the aquifer. The intent of this is to protect groundwater supplies which may be developed with the aid of future technologies...Copper 43.8 27 Lead 16.5 20 Mercury 34.7 27 Nickel 18.9 21 Selenium 22.9 25 Silver 19.2 19 Thallium 54.6 28 Zinc Miscellaneous 33.4 19 Total cyanides

  18. Environmental Assessment for the Installation of a Reclaimed Water Irrigation System Improvement Project at Tyndall Air Force Base, Florida

    Science.gov (United States)

    2012-05-04

    and may be found in shrubs and small trees . Black Racers eat a variety of prey items including frogs , lizards, mice, rats, small snakes and even...the various pipeline installation options are discussed in Section 4 of the EA. To eliminate the spread of Japanese climbing fern, it is...alternatives 1a and 1b would traverse an area of recently planted pine trees . This is an area of upland habitat and has a low potential for the

  19. Installation Restoration Program. Phase 2. Confirmation Quantification. Stage 2 for MacDill Air Force Base, Florida. Volume 1

    Science.gov (United States)

    1988-07-22

    Limestone with beds of anhydrite unit ,includes all or parts of Cajoosahatchee marl. Bone Valley Formation. Alachua Formation. and Tamisn i Formation...in a coil of wire within the sensor. The spinning protons behave like F-2 FIGURE F.1 < w 0 I o o "-- - -) "__ _- - - - ’ I CO9 0 0. CICL 1i--_ _ _ -i

  20. Environmental Assessment (EA) for the Construction of the Commissary Addition at Eglin Air Force Base, Florida. Appendices

    Science.gov (United States)

    1991-06-07

    filimentosa 1.0 2.4 1.7 I Bermudagrass Cynodon dactylon 1.0 2.4 1.7 Prickly-pear cactus Opuntia humifusa 1.0 2.4 1.7 Persimmon Diospyrus virQiniana...First, there are very few longleaf pines in the project area, and none of them appear to have the red-heart I disease of mature pines that is required for

  1. Supplemental Environmental Assessment for the Mid-Bay Bridge Connector Phases 2 and 3, Eglin Air Force Base, Florida

    Science.gov (United States)

    2010-08-03

    A through 1:: Sincerely ~~,.Y./7..--?f""V DiARIA D, RODRJ’G6£z. YF-02 Chief, Environmental Stew ·.udship Branch 3. Appendix F. Work Plan for...early 2010. 8. Mick Garrett will cOiifirm the silt/us of Eglin’s FWC gopher lorlaise recipient site permit. 9. Mick Garrell will send Bill Tale and

  2. Environmental Assessment: For Joint Biological Point Detection System (JBPDS) at Multiple Test Ranges, Eglin Air Force Base, Florida

    Science.gov (United States)

    2003-06-01

    studied at universities as a fungicide to control seed rot and fire blight. EH strain C9-1 produces an antibiotic that inhibits fire blight. However...component of garlic essential oils, European fir, Scots pine, natural gases, and it is released by germinating beans, corn, cotton, and pea seeds

  3. Proceedings of the Conference on Computer Generated Forces and Behavioral Representation (6th), Held in Orlando, Florida, on 23-25 July 1996

    Science.gov (United States)

    1996-07-01

    while remaining completely covert . Land Based Systems. Land based systems may be either fixed or mobile, depending on size and mission requirements...3D virtual reality in computer networks are of growing popularity nowadays, like VRML (Bell et. al. 1995). In an effort to add dynamics to VRML ...a "scene graph", which cannot be effectively changed from within the VRML programs as it reflects the structure of the program text. Successful

  4. Environmental Assessment: Hurricane Katrina Recovery and Installation Development at Keesler Air Force Base, Mississippi

    Science.gov (United States)

    2006-12-01

    AC Advisory Circular ADSL Average Daily Student Load AETC Air Education and Training Command AFB Air Force Base AFH Air Force Handbook ANSI...and 67 percent as off-base residents based on data obtained from the 2004 EIA. The military personnel figure was obtained by subtracting the ADSL ...contract, and all other non-military employees. 3ADSL provided in 2004 EIA. Assumed 100 percent of ADSL live on base, based on information obtained from

  5. Environmental Assessment for Proposed Utility Corridors at Edwards Air Force Base, California

    Science.gov (United States)

    2016-07-01

    Air Force Base, California Figure 3-6 Los Angeles County Significant Ecological Areas 76 Environmental Assessment for Proposed Utility... Ecological Areas designated by Los Angeles County (refer to Section 3.7.2);  Potential wildlife movement corridors; and 81 Environmental Assessment...412th Test Wing Civil Engineer Group Environmental Management Division Edwards Air Force Base, California ENVIRONMENTAL ASSESSMENT FOR PROPOSED

  6. Formations of Robotic Swarm: An Artificial Force Based Approach

    Directory of Open Access Journals (Sweden)

    Samitha W. Ekanayake

    2009-03-01

    Full Text Available Cooperative control of multiple mobile robots is an attractive and challenging problem which has drawn considerable attention in the recent past. This paper introduces a scalable decentralized control algorithm to navigate a group of mobile robots (swarm into a predefined shape in 2D space. The proposed architecture uses artificial forces to control mobile agents into the shape and spread them inside the shape while avoiding inter- member collisions. The theoretical analysis of the swarm behavior describes the motion of the complete swarm and individual members in relevant situations. We use computer simulated case studies to verify the theoretical assertions and to demonstrate the robustness of the swarm under external disturbances such as death of agents, change of shape etc. Also the performance of the proposed distributed swarm control architecture was investigated in the presence of realistic implementation issues such as localization errors, communication range limitations, boundedness of forces etc.

  7. Formations of Robotic Swarm: An Artificial Force Based Approach

    Directory of Open Access Journals (Sweden)

    Samitha W. Ekanayake

    2010-09-01

    Full Text Available Cooperative control of multiple mobile robots is an attractive and challenging problem which has drawn considerable attention in the recent past. This paper introduces a scalable decentralized control algorithm to navigate a group of mobile robots (swarm into a predefined shape in 2D space. The proposed architecture uses artificial forces to control mobile agents into the shape and spread them inside the shape while avoiding inter- member collisions. The theoretical analysis of the swarm behavior describes the motion of the complete swarm and individual members in relevant situations. We use computer simulated case studies to verify the theoretical assertions and to demonstrate the robustness of the swarm under external disturbances such as death of agents, change of shape etc. Also the performance of the proposed distributed swarm control architecture was investigated in the presence of realistic implementation issues such as localization errors, communication range limitations, boundedness of forces etc.

  8. Formations of Robotic Swarm: An Artificial Force Based Approach

    Directory of Open Access Journals (Sweden)

    Samitha W. Ekanayake

    2010-09-01

    Full Text Available Cooperative control of multiple mobile robots is an attractive and challenging problem which has drawn considerable attention in the recent past. This paper introduces a scalable decentralized control algorithm to navigate a group of mobile robots (swarm into a predefined shape in 2D space. The proposed architecture uses artificial forces to control mobile agents into the shape and spread them inside the shape while avoiding inter-member collisions. The theoretical analysis of the swarm behavior describes the motion of the complete swarm and individual members in relevant situations. We use computer simulated case studies to verify the theoretical assertions and to demonstrate the robustness of the swarm under external disturbances such as death of agents, change of shape etc. Also the performance of the proposed distributed swarm control architecture was investigated in the presence of realistic implementation issues such as localization errors, communication range limitations, boundedness of forces etc.

  9. Formations of Robotic Swarm: An Artificial Force Based Approach

    Directory of Open Access Journals (Sweden)

    Samitha W. Ekanayake

    2009-03-01

    Full Text Available Cooperative control of multiple mobile robots is an attractive and challenging problem which has drawn considerable attention in the recent past. This paper introduces a scalable decentralized control algorithm to navigate a group of mobile robots (swarm into a predefined shape in 2D space. The proposed architecture uses artificial forces to control mobile agents into the shape and spread them inside the shape while avoiding inter-member collisions. The theoretical analysis of the swarm behavior describes the motion of the complete swarm and individual members in relevant situations. We use computer simulated case studies to verify the theoretical assertions and to demonstrate the robustness of the swarm under external disturbances such as death of agents, change of shape etc. Also the performance of the proposed distributed swarm control architecture was investigated in the presence of realistic implementation issues such as localization errors, communication range limitations, boundedness of forces etc.

  10. Capital Improvement Program Environmental Assessment, Dyess Air Force Base, Texas

    Science.gov (United States)

    2010-09-01

    logistics readiness, and security forces. The 7th Medical Group is comprised of medical support, aeromedical/ dental , and medical operations...Medical Group. Dyess AFB has a medical clinic and dental clinic. The medical clinic does not provide emergency services. Medical emergencies are...Dyess 2005b). The most abundant types of hazardous wastes at Dyess AFB are jet wash wastes, sealants and adhesives, epoxy resins, paints and

  11. 75 FR 30689 - Modification of Class C Airspace; Beale Air Force Base, CA

    Science.gov (United States)

    2010-06-02

    ... Base, CA AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: This action modifies the legal description of the Beale Air Force Base (AFB), CA, Class C airspace area by allowing the...

  12. Estimation of Handgrip Force from SEMG Based on Wavelet Scale Selection.

    Science.gov (United States)

    Wang, Kai; Zhang, Xianmin; Ota, Jun; Huang, Yanjiang

    2018-02-24

    This paper proposes a nonlinear correlation-based wavelet scale selection technology to select the effective wavelet scales for the estimation of handgrip force from surface electromyograms (SEMG). The SEMG signal corresponding to gripping force was collected from extensor and flexor forearm muscles during the force-varying analysis task. We performed a computational sensitivity analysis on the initial nonlinear SEMG-handgrip force model. To explore the nonlinear correlation between ten wavelet scales and handgrip force, a large-scale iteration based on the Monte Carlo simulation was conducted. To choose a suitable combination of scales, we proposed a rule to combine wavelet scales based on the sensitivity of each scale and selected the appropriate combination of wavelet scales based on sequence combination analysis (SCA). The results of SCA indicated that the scale combination VI is suitable for estimating force from the extensors and the combination V is suitable for the flexors. The proposed method was compared to two former methods through prolonged static and force-varying contraction tasks. The experiment results showed that the root mean square errors derived by the proposed method for both static and force-varying contraction tasks were less than 20%. The accuracy and robustness of the handgrip force derived by the proposed method is better than that obtained by the former methods.

  13. Research of a Novel Three-dimensional Force Flexible Tactile Sensor Based on Conductive Rubber

    Directory of Open Access Journals (Sweden)

    Fei Xu

    2010-09-01

    Full Text Available A novel three-dimensional force flexible tactile sensor using conductive rubber with "overall injection molding" technique is presented. The sensor is based on conductive rubber’s force-sensitive property. The sensor is flexible and can measure 3-D force. The rubber’s characteristics, the sensor’s structure and its principle are described. The results of simulation will be also presented.

  14. Drought of 1998-2002: impacts on Florida's hydrology and landscape

    Science.gov (United States)

    Verdi, Richard Jay; Tomlinson, Stewart A.; Marella, Richard L.

    2006-01-01

    Lower than normal precipitation caused a severe statewide drought in Florida from 1998 to 2002. Based on precipitation and streamflow records dating to the early 1900s, the drought was one of the worst ever to affect the State. In terms of severity, this drought was comparable to the drought of 1949-1957 in duration and had record-setting low flows in several basins. The drought was particularly severe over the 5-year period in the northwest, northeast, and southwest regions of Florida, where rainfall deficits ranged from 9-10 in. below normal (southwest Florida) to 38-40 in. below normal (northwest Florida). Within these regions, the drought caused record-low streamflows in several river basins, increased freshwater withdrawals, and created hazardous conditions ripe for wildfires, sinkhole development, and even the draining of lakes. South Florida was affected primarily in 2001, when the region experienced below-average streamflow conditions; however, cumulative rainfall in south Florida never fell below the 30-year normal. The four regions of Florida, as referred to throughout this report, are defined based upon U.S. Geological Survey (USGS) data collection regions in Florida. Record-low flows were reported at several streamflow-gaging stations throughout the State, including the Withlacoochee River at Trilby, which reached zero flow on June 10-11, 2000, for the first time during the period of record (1928-2004). Streamflow conditions varied across the State from 31 percent of average flow in 2000 in southwest Florida, to 100 percent of average in 1999 in south Florida. Low-flow recurrence intervals during the drought ranged from less than 2 years at three locations to greater than 50 years at many locations. During the 1998-2002 drought, ground-water levels at many wells across the State declined to elevations not seen in many years. At some wells, ground-water levels reached record lows for their period of record. Florida Water Management Districts responded by

  15. U.S. Air Force Environmental Assessment, Steam Decentralization Project, Tinker Air Force Base, Oklahoma

    Science.gov (United States)

    2011-08-01

    intelligent 20 transportation techniques, and travel reduction programs. 21 Eleven air quality monitoring stations are located within Oklahoma...antillarum Least Tern E E Tyto alba Barn Owl SS2 Vireo atricapillus Black-Capped Vireo E Mammals Marmota monax Woodchuck SS2 Reptiles Phrynosoma...airfield), and 800 unimproved acres. 15 A total of 244 vertebrate species occur on the base, consisting of 26 reptiles , 11 amphibians, 16 24 mammals

  16. Blue Carbon Sequestration in Florida Coastal Wetlands - Response to Recent Climate Change and Holocene Climate Variability

    Science.gov (United States)

    Vaughn, D.; Bianchi, T. S.; Osborne, T.; Shields, M. R.; Kenney, W.

    2017-12-01

    Intertidal forests and salt marshes represent a major component of Florida's coasts and are essential to the health and integrity of coastal Florida's ecological and economic systems. In addition, coastal wetlands have been recognized as highly efficient carbon sinks with their ability to store carbon on time scales from centuries to millennia. Although losses of salt marshes, mangroves, and seagrass beds through both natural and anthropogenic forces are threatening their ability to act as carbon sinks globally, the poleward encroachment of mangroves into higher latitude salt marshes may lead to regional increases in carbon sequestration as mangroves store more carbon than salt marshes. For Florida, this encroachment of mangroves into salt marshes is prominent along the northern coasts where fewer freeze events have coincided with an increase in mangrove extent over the past several decades. Soil cores collected from a northeastern Florida wetland will allow us to determine whether the recent poleward encroachment of mangroves into northern Florida salt marshes has led to an increase in belowground carbon storage. The soil cores, which are approximately two to three meters in length, will also provide the first known record of carbon storage in a northern Florida wetland during the Holocene. Initial results from the top 40 cm, which represents 100 years based on dating of other northern Florida wetland cores, suggest more carbon is currently being stored within the transition between marsh and mangrove than in areas currently covered by salt marsh vegetation or mangroves. The transitional zone also has a much larger loss of carbon within the top 40 cm compared to the mangrove and marsh cores. Lignin-based degradation indices along with other biomarker data and 210Pb/137Cs ages will be presented to demonstrate how much of this loss of carbon may be related to degradation and how much may be related to changes in carbon sources.

  17. A Profile of Suwannee County, Florida.

    Science.gov (United States)

    Beaulieu, Lionel J.

    Agriculture and the railroad were significant forces in the development of Suwannee County, Florida, formally created in 1858 but explored and settled beginning some 300 years earlier. Lumber and cotton caused an early 20th century boom in the county which soon saw the negative effects of both industries. The introduction of tobacco in the late…

  18. Final Environmental Assessment: Replacement Joint Force Headquarters Building, Hanscom Air Force Base Massachusetts

    Science.gov (United States)

    2010-01-22

    inspirational musical adaptation of the Charles Dickens classic opens at Concord’s Emerson Umbrella Center for the Arts at 7:30 p.m. tomorrow. Though most...www.new- lifefinearts.org. ONE STAGE, ONE MAN: Dickens himself was quite the rage when he gave solo dramatic readings of ‘‘A Christmas Carol’’ to...based on the Dickens classic. 2 W1 W1 -2 21:40 P u b lic at io n D at e: 12 /1 0/ 20 09 A d N um be r: 20 00 26 83 37 In se rt io n N um be r

  19. [Preliminary study on force feedback of acupuncture in virtual reality based on the visible human].

    Science.gov (United States)

    Cheng, Zhuo; Wang, Hai-sheng; Min, You-jiang; Yan, Zhen-guo; Hong, Z Tan; Zhuang, Tian-ge

    2007-01-01

    This paper discusses the application of virtual reality technology in the 3-D visible human body and acupuncture research. Based on the 3-D visible human fused with the localization information and hierarchy of acupoints, the paper analyzes the force against the needle and haptic rendering during the needle manipulation according to the physical properties of different tissues. A haptic model is constructed to demonstrate the force behaviors during acupuncture, and the force will be produced and passed to the manipulator by a force feedback device. It enriches the contents of 3-D visible human project, provides a dynamic simulation instrument for acupuncture teaching, and supplies a platform for acupuncture research.

  20. Environmental Assessment for Aerial Application of Pesticide for Gypsy Moth Control, Andrews Air Force Base, Maryland

    Science.gov (United States)

    2008-04-01

    limited quantities by a cooperative effort of the USDA Forest Service and the Animal Plant Health Inspection Service (APHIS). The active...AFB, 2007 18 SECTION 12 - ACRONYMS AND ABBREVIATIONS AFB Air Force Base AFI Air Force Instruction APHIS Animal Plant Health Inspection Service AWS

  1. Florida Energy Assurance Plan

    Science.gov (United States)

    Turner, Niescja E.; Murtagh, William; Guthrie, Kevin; Nykyri, Katariina; Radasky, William A.; Senkowicz, Eric

    2012-08-01

    This spring, Florida held the nation's first statewide emergency preparedness training and exercises geared specifically to the aftermath of severe geomagnetic events. Funded by the State of Florida Division of Emergency Management (FDEM) via a Department of Energy grant and held in collaboration with Watch House International, Inquesta Corporation, and the Florida Institute of Technology, the 17-19 April 2012 workshop had 99 on-site attendees in an oceanfront hotel in Melbourne, Florida, as well as 16 over live Web streaming. The workshop was the capstone to a three-month season of 21 regional space weather training sessions and workshops serving 386 attendees in total.

  2. Final Nellis Air Force Base Capital Improvements Program Environmental Assessment

    Science.gov (United States)

    2013-08-01

    as “degraded” primarily due to problems with hydraulic overloading in several areas of the system and with 10 small pumping stations (Air Force 2011b...increases in truck (e.g., dump trucks , fill transports) traffic within and near the construction corridor would produce localized noise for brief periods...mile lb lb lb lb lb lb lb Dump   Truck  (12 CY Capacity) 9 230 27 1.66E‐03 8.58E‐03 3.92E‐02 1.82E‐05 1.69E‐03 1.64E‐03 3 0.41 2.14 9.81 0.00 0.42 0.41

  3. Passivity-based Visual Force Feedback Control for Fixed Camera Systems

    Science.gov (United States)

    Kawai, Hiroyuki; Murao, Toshiyuki; Fujita, Masayuki

    This paper investigates passivity based 3D visual force feedback control for fixed camera systems. In our approach, we can control not only the position but also the orientation of the robot hand with a contact force by using visual information. The proposed method can be regarded as an extension of the hybrid position/force control to the hybrid vision/force control. The main contribution of this paper is to show that the 3D visual force feedback system has the passivity which allows us to prove stability in the sense of Lyapunov. Both the passivity of the manipulator dynamics and the visual feedback system are preserved. Finally simulation results on 3DOF planar manipulator are presented to verify the stability of the 3D visual force feedback system and understand our proposed method simply.

  4. Mapping Nearshore Seagrass and Colonized Hard Bottom Spatial Distribution and Percent Biological Cover in Florida, USA Using Object Based Image Analysis of WorldView-2 Satellite Imagery

    Science.gov (United States)

    Baumstark, R. D.; Duffey, R.; Pu, R.

    2016-12-01

    The offshore extent of seagrass habitat along the West Florida (USA) coast represents an important corridor for inshore-offshore migration of economically important fish and shellfish. Surviving at the fringe of light requirements, offshore seagrass beds are sensitive to changes in water clarity. Beyond and intermingled with the offshore seagrass areas are large swaths of colonized hard bottom. These offshore habitats of the West Florida coast have lacked mapping efforts needed for status and trends monitoring. The objective of this study was to propose an object-based classification method for mapping offshore habitats and to compare results to traditional photo-interpreted maps. Benthic maps depicting the spatial distribution and percent biological cover were created from WorldView-2 satellite imagery using Object Based Image Analysis (OBIA) method and a visual photo-interpretation method. A logistic regression analysis identified depth and distance from shore as significant parameters for discriminating spectrally similar seagrass and colonized hard bottom features. Seagrass, colonized hard bottom and unconsolidated sediment (sand) were mapped with 78% overall accuracy using the OBIA method compared to 71% overall accuracy using the photo-interpretation method. This study presents an alternative for mapping deeper, offshore habitats capable of producing higher thematic (percent biological cover) and spatial resolution maps compared to those created with the traditional photo-interpretation method.

  5. Coastal Flooding in Florida's Big Bend Region with Application to Sea Level Rise Based on Synthetic Storms Analysis

    Directory of Open Access Journals (Sweden)

    Scott C. Hagen Peter Bacopoulos

    2012-01-01

    Full Text Available Flooding is examined by comparing maximum envelopes of water against the 0.2% (= 1-in-500-year return-period flooding surface generated as part of revising the Federal Emergency Management Agency¡¦s flood insurance rate maps for Franklin, Wakulla, and Jefferson counties in Florida¡¦s Big Bend Region. The analysis condenses the number of storms to a small fraction of the original 159 used in production. The analysis is performed by assessing which synthetic storms contributed to inundation extent (the extent of inundation into the floodplain, coverage (the overall surface area of the inundated floodplain and the spatially variable 0.2% flooding surface. The results are interpreted in terms of storm attributes (pressure deficit, radius to maximum winds, translation speed, storm heading, and landfall location and the physical processes occurring within the natural system (storms surge and waves; both are contextualized against existing and new hurricane scales. The approach identifies what types of storms and storm attributes lead to what types of inundation, as measured in terms of extent and coverage, in Florida¡¦s Big Bend Region and provides a basis in the identification of a select subset of synthetic storms for studying the impact of sea level rise. The sea level rise application provides a clear contrast between a dynamic approach versus that of a static approach.

  6. Biscayne Bay Florida Bottlenose Dolphin Studies

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These data sets include a compilation of small vessel based studies of bottlenose dolphins that reside within Biscayne Bay, Florida, adjacent estuaries and nearshore...

  7. High Resolution Forecasts in the Florida Straits: Predicting the Modulations of the Florida Current and Connectivity Around South Florida and Cuba

    Science.gov (United States)

    Kourafalou, V.; Kang, H.; Perlin, N.; Le Henaff, M.; Lamkin, J. T.

    2016-02-01

    Connectivity around the South Florida coastal regions and between South Florida and Cuba are largely influenced by a) local coastal processes and b) circulation in the Florida Straits, which is controlled by the larger scale Florida Current variability. Prediction of the physical connectivity is a necessary component for several activities that require ocean forecasts, such as oil spills, fisheries research, search and rescue. This requires a predictive system that can accommodate the intense coastal to offshore interactions and the linkages to the complex regional circulation. The Florida Straits, South Florida and Florida Keys Hybrid Coordinate Ocean Model is such a regional ocean predictive system, covering a large area over the Florida Straits and the adjacent land areas, representing both coastal and oceanic processes. The real-time ocean forecast system is high resolution ( 900m), embedded in larger scale predictive models. It includes detailed coastal bathymetry, high resolution/high frequency atmospheric forcing and provides 7-day forecasts, updated daily (see: http://coastalmodeling.rsmas.miami.edu/). The unprecedented high resolution and coastal details of this system provide value added on global forecasts through downscaling and allow a variety of applications. Examples will be presented, focusing on the period of a 2015 fisheries cruise around the coastal areas of Cuba, where model predictions helped guide the measurements on biophysical connectivity, under intense variability of the mesoscale eddy field and subsequent Florida Current meandering.

  8. Hybrid Force Control Based on ICMAC for an Astronaut Rehabilitative Training Robot

    Directory of Open Access Journals (Sweden)

    Lixun Zhang

    2012-08-01

    Full Text Available A novel Astronaut Rehabilitative Training Robot (ART based on a cable-driven mechanism is represented in this paper. ART, a typical passive force servo system, can help astronauts to bench press in a microgravity environment. The purpose of this paper is to design controllers to eliminate the surplus force caused by an astronaut's active movements. Based on the dynamics modelling of the cable-driven unit, a hybrid force controller based on improved credit assignment CMAC (ICMAC is presented. A planning method for the cable tension is proposed so that the dynamic load produced by the ART can realistically simulate the gravity and inertial force of the barbell in a gravity environment. Finally, MATLAB simulation results of the man-machine cooperation system are provided in order to verify the effectiveness of the proposed control strategy. The simulation results show that the hybrid control method based on the structure invariance principle can inhibit the surplus force and that ICMAC can improve the dynamic performance of the passive force servo system. Furthermore, the hybrid force controller based on ICMAC can ensure the stability of the system.

  9. Analysis and experimental evaluation of a Stewart platform-based force/torque sensor

    Science.gov (United States)

    Nguyen, Charles C.; Antrazi, Sami S.

    1992-01-01

    The kinematic analysis and experimentation of a force/torque sensor whose design is based on the mechanism of the Stewart Platform are discussed. Besides being used for measurement of forces/torques, the sensor also serves as a compliant platform which provides passive compliance during a robotic assembly task. It consists of two platforms, the upper compliant platform (UCP) and the lower compliant platform (LCP), coupled together through six spring-loaded pistons whose length variations are measured by six linear voltage differential transformers (LVDT) mounted along the pistons. Solutions to the forward and inverse kinematics of the force sensor are derived. Based on the known spring constant and the piston length changes, forces/torques applied to the LCP gripper are computed using vector algebra. Results of experiments conducted to evaluate the sensing capability of the force sensor are reported and discussed.

  10. Geophysical Characterization of Fractured Bedrock at Site 8 Former Pease Air Force Base, Newington, New Hampshire

    National Research Council Canada - National Science Library

    Mack, Thomas J; Degnan, James R

    2002-01-01

    ... beneath the former Pease Air Force Base, Newington, N.H. The following logs were used: caliper, fluid temperature and conductivity, natural gamma radiation, electromagnetic conductivity, optical and acoustic televiewer, and heat-pulse flowmeter...

  11. (Environmental investigation of ground water contamination at Wright-Patterson Air Force Base, Ohio)

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    This report presents information concerning field procedures employed during the monitoring, well construction, well purging, sampling, and well logging at the Wright-Patterson Air Force Base. Activities were conducted in an effort to evaluate ground water contamination.

  12. Intranet-Based Decision Support for the Marine Air Ground Task Force Aviation Combat Element

    National Research Council Canada - National Science Library

    LeMay, Malcolm

    1998-01-01

    ...) of the Marine Air Ground Task Force (MAGTF). Through the use of Intranet-based decision support, internet technology can be leveraged to improve the decision support and information processes of the ACE...

  13. Evaluating Coral Health in La Parguera, Puerto Rico, and Southeastern Florida: Comparison of Satellite-Based Sea Surface Temperature to In Situ Observations

    Science.gov (United States)

    Gomez, A. M.; McDonald, K. C.; Shein, K. A.; Devries, S. L.; Armstrong, R.; Carlo, M.

    2017-12-01

    The third global coral bleaching event, which began in mid-2014, is a major environmental stressor that has been causing significant documented damage to coral reefs in all tropical ocean basins. This worldwide phenomenon is the longest and largest coral bleaching event on record and now finally appears to be ending. During this event, some coral colonies proved to be more resilient to increased ocean temperatures while others bleached severely. This research investigates the spatial and temporal variability of bleaching stress on coral reefs in La Parguera, Puerto Rico, and Southeastern Florida to help further understand the role of temperature and light in coral bleaching. We examine the microclimate within two coral reef systems, using in situ collections of temperature and light data from data loggers deployed throughout Cayo Enrique and Cayo Mario in La Parguera, and Lauderdale-By-The-Sea in FLorida. The in situ measurements are compared to NOAA Coral Reef Watch's 5-km sea surface temperature data as well as to the associated Light Stress Damage Product. Research outcomes include statistical analyses of in situ measurements with satellite datasets supporting enhanced interpretation of satellite-based SST and light products, and ecological niche modeling to assess where corals could potentially survive under future climate conditions. Additional understanding of the microclimate encompassing coral reefs and improved satellite SST and light data will ultimately help coral reef ecosystem managers and policy makers in prioritizing resources toward the monitoring and protection of coral reef ecosystems.

  14. 'Florida Beauty' strawberry

    Science.gov (United States)

    Florida Beauty’ strawberry (Fragaria x ananassa) originated from a 2012 cross made by the Queensland breeding program between Queensland Australia selection 2010-119 (female parent) and ‘Florida Radiance’ (male parent). Selection 2010-119 was chosen as a parent for its excellent fruit shape and fl...

  15. Environmental Assessment for Landfill Drainage Improvements Vandenberg Air Force Base, California

    Science.gov (United States)

    2003-04-07

    for Landfill Drainage Improvements Vandenberg Air Force Base, California Page3-23 between Gaviota and Guadalupe. Farming and ranching were the...Resources, edited by Michael J. Moratto. Tetra Tech, Inc., Santa Barbara, California , and Applied EarthWorks, Inc., Fresno , California . Submitted to...Final Environmental Assessment for Landfill Drainage Improvements Vandenberg Air Force Base, California April 7, 2003 30 CES/CEVPP 806 13th

  16. A Numerical Simulation of Base Shear Forces and Moments Exerted by Waves on Large Diameter Pile

    Directory of Open Access Journals (Sweden)

    You-liang Cheng

    2017-01-01

    Full Text Available To solve the problem of the dynamic variation of wave force diameter of pile foundation for offshore wind turbines, wave force and moment of large diameter pile foundation can be calculated. In this paper, simulation technique is used to calculate the wave force and moment of different large diameter pile foundation, and the base shear force and moment of the interval 20-degree phase angle are obtained by the base line of the pile. Under the action of a certain load, the complete stress variation of the pile foundation is obtained. According to the basic principle of diffraction theory, the process curve of large diameter pile, and analysis of wave force, diffraction force changes in a certain period of time interval. The results show that the wave after the large diameter pile formed around the vortex, large diameter pile base shear, and moment dynamic change is nonlinear in a complete cycle, the diameter of the pile increases by 0.5 m, and the wave force increases by about 5%, the results show that it provides certain reference value for the offshore pile foundation pile with large diameter primary site. Some significant results for practical application are discussed.

  17. Shaw Air Force Base Infrastructure Project Environmental Assessment

    Science.gov (United States)

    2008-09-01

    northeast boundary and one of its tributaries, Spann Branch, along the northern boundary, as well as Mush Branch, originating at the southwest corner of...Water Shaw AFB is located within the Southern Coastal Plain physiographic region of South Carolina. Spann Branch and Long Branch Creeks are the...major naturally occurring surface water features on Shaw AFB. Spann Branch flows along the northern boundary of the base into Long Branch. Long Branch

  18. Shaw Air Force Base Capital Improvement Program Environmental Assessment

    Science.gov (United States)

    2010-05-01

    tributary, Spann Branch, along the northern boundary, as well as Mush Branch, originating at the southwest corner of the base just south of U.S...20 3.6.2 Existing Conditions SURFACE WATER Shaw AFB is located within the Southern Coastal Plain physiographic region of South Carolina. Spann ...Branch and Long Branch Creeks are the major naturally occurring surface water features on Shaw AFB. Spann Branch flows along the northern boundary of

  19. Environmental Assessment Proposed Demolition Plan Hill Air Force Base, Utah

    Science.gov (United States)

    2010-04-01

    Administrative Code UDAQ Utah Department of Air Quality UDEQ Utah Department of Environmental Quality UPDES Utah Pollutant Discharge Elimination System...storm water is discharged into a collection point then drained off base. Hill AFB does not have a Utah Pollutant Discharge Elimination System ( UPDES ...to accept friable asbestos. Loose flakes of LBP (confirmed to contain lead by on-site inspections using a portable X -ray fluorescence analyzer

  20. A Population-Based Approach to Restore and Manage Ruppia Maritima (Wigeongrass) in the Highly Variable Everglades-Florida Bay Ecotone

    Science.gov (United States)

    Strazisar, T. M.; Koch, M.; Madden, C. J.

    2016-02-01

    Seagrasses and submerged aquatic vegetation (SAV) continue to decline globally from human-induced disturbance and habitat loss in estuarine and coastal ecosystems. The SAV Ruppia maritima historically created critical habitat at the Everglades-Florida Bay ecotone, but hydrological modifications and lower freshwater flows have resulted in significant declines in recent decades. We used a population-based approach to examine factors controlling Ruppia presence and abundance at the ecotone to expand the scientific base for management and restoration of SAV species in highly variable environments and examine factors required for Ruppia restoration in the Everglades. Life history transitions from seed through sexual reproduction were established under a range of field conditions critical to seagrass and SAV persistence, including salinity, temperature, light, sediment nutrients (P) and competitor SAV. We found multiple constraints to Ruppia life history development, including an ephemeral seed bank, low rates of successful germination and seedling survival and clonal reproduction limited by variable salinity, nutrients, light and competition with the macroalga Chara hornemannii. Because of low survival rates and limited clonal reproduction, Ruppia at the Evergaldes ecotone currently depends on high rates of viable seed production. However, development of large reproductive meadows requires high vegetative shoot densities. Thus, Everglades restoration should establish lower salinities to create higher seedling and adult survival and clonal reproduction to support successful sexual reproduction that can build up the seed bank for years when adult survival is limited. This population-based data from field experiments and surveys is being incorporated into a seagrass model to enable forecasting of population sustainability and evaluate Everglades restoration targets which includes restoring Ruppia to the southern Everglades-Florida Bay ecotone.

  1. Prestress Force Identification for Externally Prestressed Concrete Beam Based on Frequency Equation and Measured Frequencies

    Directory of Open Access Journals (Sweden)

    Luning Shi

    2014-01-01

    Full Text Available A prestress force identification method for externally prestressed concrete uniform beam based on the frequency equation and the measured frequencies is developed. For the purpose of the prestress force identification accuracy, we first look for the appropriate method to solve the free vibration equation of externally prestressed concrete beam and then combine the measured frequencies with frequency equation to identify the prestress force. To obtain the exact solution of the free vibration equation of multispan externally prestressed concrete beam, an analytical model of externally prestressed concrete beam is set up based on the Bernoulli-Euler beam theory and the function relation between prestress variation and vibration displacement is built. The multispan externally prestressed concrete beam is taken as the multiple single-span beams which must meet the bending moment and rotation angle boundary conditions, the free vibration equation is solved using sublevel simultaneous method and the semi-analytical solution of the free vibration equation which considered the influence of prestress on section rigidity and beam length is obtained. Taking simply supported concrete beam and two-span concrete beam with external tendons as examples, frequency function curves are obtained with the measured frequencies into it and the prestress force can be identified using the abscissa of the crosspoint of frequency functions. Identification value of the prestress force is in good agreement with the test results. The method can accurately identify prestress force of externally prestressed concrete beam and trace the trend of effective prestress force.

  2. Factors Affecting Aerosol Radiative Forcing from Both Production-based and Consumption-based View

    Science.gov (United States)

    Wang, J.; Lin, J.; Ni, R.

    2017-12-01

    Aerosol radiative forcing (RF) is determined by emissions and various chemical-transport-radiative processes in the atmosphere, a multi-factor problem whose individual contributors have not been well quantified. This problem becomes more complicated when taking into account the role of international trade, which means reallocated aerosol RF due to separation of regions producing goods and emissions and regions consuming those goods. Here we analyze major factors affecting RF of secondary inorganic aerosols (SIOAs, including sulfate, nitrate and ammonium), primary organic aerosol (POA) and black carbon (BC), extending the work of Lin et al. (2016, Nature Geoscience). We contrast five factors determining production-based (RFp, due to a region's production of goods) and consumption-based (RFc, due to a region's consumption) forcing by 11 major regions, including population size, per capita output, emission intensity (emission per output), chemical efficiency (mass per unit emission) and radiative efficiency (RF per unit mass). Comparing across the 11 regions, East Asia produces the strongest RFp and RFc of SIOA and BC and the second largest RFp and RFc of POA primarily due to its high emission intensity. Although Middle East and North Africa has low emissions, its RFp is strengthened by its largest chemical efficiency for POA and BC and second largest chemical efficiency for SIOA. However, RFp of South-East Asia and Pacific is greatly weakened by its lowest chemical efficiency. Economic trade means that net importers (Western Europe, North America and Pacific OECD) have higher RFc than RFp by 50-100%. And such forcing difference is mainly due to the high emission intensity of the exporters supplying these regions. For North America, SIOA's RFc is 50% stronger than RFp, for that emission intensity of SIOA is 5.2 times in East Asia and 2.5 times in Latin America and Caribbean compared with that in North America, and the chemical efficiency in the top four exporters are

  3. Matlab-based interface for the simultaneous acquisition of force measures and Doppler ultrasound muscular images.

    Science.gov (United States)

    Ferrer-Buedo, José; Martínez-Sober, Marcelino; Alakhdar-Mohmara, Yasser; Soria-Olivas, Emilio; Benítez-Martínez, Josep C; Martínez-Martínez, José M

    2013-04-01

    This paper tackles the design of a graphical user interface (GUI) based on Matlab (MathWorks Inc., MA), a worldwide standard in the processing of biosignals, which allows the acquisition of muscular force signals and images from a ultrasound scanner simultaneously. Thus, it is possible to unify two key magnitudes for analyzing the evolution of muscular injuries: the force exerted by the muscle and section/length of the muscle when such force is exerted. This paper describes the modules developed to finally show its applicability with a case study to analyze the functioning capacity of the shoulder rotator cuff. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

  4. Prediction of Three-Dimensional Milling Forces Based on Finite Element

    Directory of Open Access Journals (Sweden)

    Lida Zhu

    2014-01-01

    Full Text Available The model of milling force is mainly proposed to predict and analyze the cutting process based on finite element method in this paper. Firstly, milling finite element model is given based on orthogonal cutting principle, and then the influence laws of cutting parameters on chip formation are analyzed by using different simulation parameters. In addition, the three-dimensional milling forces are obtained from finite element models. Finally, the values of milling force by the milling experiment are also compared and analyzed with the simulation values to verify the feasibility and reasonability. It can be shown that milling forces match well between simulation and experiment results, which can provide many good basic data and analysis methods to optimize the machining parameters, reduce tool wear, and improve the workpiece surface roughness and adapt to the programming strategy of high speed machining.

  5. Hysteresis Compensation of Piezoresistive Carbon Nanotube/Polydimethylsiloxane Composite-Based Force Sensors

    Directory of Open Access Journals (Sweden)

    Ji-Sik Kim

    2017-01-01

    Full Text Available This paper provides a preliminary study on the hysteresis compensation of a piezoresistive silicon-based polymer composite, poly(dimethylsiloxane dispersed with carbon nanotubes (CNTs, to demonstrate its feasibility as a conductive composite (i.e., a force-sensitive resistor for force sensors. In this study, the potential use of the nanotube/polydimethylsiloxane (CNT/PDMS as a force sensor is evaluated for the first time. The experimental results show that the electrical resistance of the CNT/PDMS composite changes in response to sinusoidal loading and static compressive load. The compensated output based on the Duhem hysteresis model shows a linear relationship. This simple hysteresis model can compensate for the nonlinear frequency-dependent hysteresis phenomenon when a dynamic sinusoidal force input is applied.

  6. A 4-Mid-Node Plane Model of Base Force Element Method on Complementary Energy Principle

    Directory of Open Access Journals (Sweden)

    Yinghua Liu

    2013-01-01

    Full Text Available Using the base forces as fundamental variables to describe the stress state and the displacement gradients that are the conjugate variables of the base forces to describe the deformation state for the two-dimensional elasticity problems, a 4-mid-node plane model of base force element method (BFEM based on complementary energy principle is proposed. In this paper, the complementary energy of an element of the BFEM is constructed by using the base forces. The equilibrium conditions are released by the Lagrange multiplier method, and a modified complementary energy principle described by the base forces is obtained. The formulation of the 4-mid-node plane element of the BFEM is derived by assuming that the stress is uniformly distributed on each edge of the plane elements. A procedure of the BFEM on complementary energy principle is developed using MATLAB language. The numerical results of examples show that this model of the BFEM has high precision and is free from mesh sensitivity. This model shows good performances.

  7. Influence of ventilation strategies on indoor radon concentrations based on a semiempirical model for Florida-style houses

    International Nuclear Information System (INIS)

    Hintenlang, D.E.; Al-Ahmady, K.K.

    1994-01-01

    Measurements in a full-scale experimental facility are used to benchmark a semiempirical model for predicting indoor radon concentrations for Florida-style houses built using slab-on-grade construction. The model is developed to provide time-averaged indoor radon concentrations from quantitative relationships between the time-dependent radon entry and elimination mechanisms that have been demonstrated to be important for this style of residential construction. The model successfully predicts indoor radon concentrations in the research structure for several pressure and ventilation conditions. Parametric studies using the model illustrate how different ventilation strategies affect indoor radon concentrations. It is demonstrated that increasing house ventilation rates by increasing the effective leakage area of the house shell does not reduce indoor radon concentrations as effectively as increasing house ventilation rates by controlled duct ventilation associated with the heating, ventilating, and air conditioning system. The latter strategy provides the potential to minimize indoor radon concentrations while providing positive control over the quality of infiltration air. 9 refs., 5 figs

  8. L2 -stability of haptic systems with projection-based force reflection.

    Science.gov (United States)

    Polushin, Ilia G; Hasan, Mir Zayed

    2014-01-01

    The problem of stability of haptic interaction with virtual objects is addressed, where the force reflection is implemented using the projection-based principle. A stability condition is derived that generalizes some previously known results to the case of projection-based force reflection. It demonstrates that, in this case, an additional design parameter is brought in that allows to increase the admissible stiffness of the virtual wall and decrease the update rate without changing the damping of the haptic device. A passivity based interpretation of the result is given in terms of interconnection of generalized passive systems where the excess of passivity of haptic device compensates the shortage of passivity of the virtual wall. In particular, it is shown that the projection-based force reflection allows to arbitrarily increase the excess of passivity of the haptic device without changing its physical damping.

  9. 77 FR 5781 - Record of Decision for the Air Space Training Initiative Shaw Air Force Base, South Carolina...

    Science.gov (United States)

    2012-02-06

    ... DEPARTMENT OF DEFENSE Department of the Air Force Record of Decision for the Air Space Training Initiative Shaw Air Force Base, South Carolina Final Environmental Impact Statement ACTION: Notice of... signed the ROD for the Airspace Training Initiative Shaw Air Force Base, South Carolina Final...

  10. MONITORING FLORIDA'S WATERS

    Science.gov (United States)

    GIS plays an important role as a management tool for the multi-dimensional Status Monitoring Network (SMN) program to monitor Florida's freshwater resources. By pulling together basin assessments, statistical analysis, surface water and groundwater analytical data, background is...

  11. Prediction of bubble detachment diameter in flow boiling based on force analysis

    International Nuclear Information System (INIS)

    Chen Deqi; Pan Liangming; Ren Song

    2012-01-01

    Highlights: ► All the forces acting on the growing bubbles are taken into account in the model. ► The bubble contact diameter has significant effect on bubble detachment. ► Bubble growth force and surface tension are more significant in narrow channel. ► A good agreement between the predicted and the measured results is achieved. - Abstract: Bubble detachment diameter is one of the key parameters in the study of bubble dynamics and boiling heat transfer, and it is hard to be measured in a boiling system. In order to predict the bubble detachment diameter, a theoretical model is proposed based on forces analysis in this paper. All the forces acting on a bubble are taken into account to establish a model for different flow boiling configurations, including narrow and conventional channels, upward, downward and horizontal flows. A correlation of bubble contact circle diameter is adopted in this study, and it is found that the bubble contact circle diameter has significant effect on bubble detachment. A new correlation taking the bubble contact circle diameter into account for the evaluation of bubble growth force is proposed in this study, and it is found that the bubble growth force and surface tension force are more significant in narrow channel when comparing with that in conventional channel. A visual experiment was carried out in order to verify present model; and the experimental data from published literature are used also. A good agreement between predicted and measured results is achieved.

  12. Experimental study of frost heaving force based on transient shock response using piezoceramic sensors

    Science.gov (United States)

    Wang, Ruolin; Peng, Tongxiao; Wang, Ming L.

    2016-04-01

    In seasonally frozen soil regions, the frost heaving problem made it difficult to monitor or evaluate the pile safety for long term. So far, no mature tool can be utilized to monitor the frost heaving force, which was unevenly distributed along the pile. In this paper, a piezoceramic sensing based transient excitation response approach was proposed to monitor the frost heaving force in real time. Freeze-thaw cycles can result in great changes of soil engineering properties, including the frost heaving force. So, the freeze-thaw cycle was repeated fourth to study its effect. In the experiment, transient horizontal shock on the top of the pile will be detected by the 6 PZT sensors glued on the pile. The signal data received by the 6 PZT sensors can be used to illustrate the frost heaving force distribution along the pile. Moisture content effect is also one of the important reasons that cause the variation of soil mechanical properties. So three different moisture content (6%, 12%, 18%) testing soil were used in this experiment to detect the variance of the frost heaving force. An energy indicator was developed to quantitatively evaluate the frost heaving force applied on the pile. The experimental results showed that the proposed method was effective in monitoring the uneven distribution of frost heaving force along the pile.

  13. A Vision-Based Approach for Estimating Contact Forces: Applications to Robot-Assisted Surgery

    Directory of Open Access Journals (Sweden)

    C. W. Kennedy

    2005-01-01

    Full Text Available The primary goal of this paper is to provide force feedback to the user using vision-based techniques. The approach presented in this paper can be used to provide force feedback to the surgeon for robot-assisted procedures. As proof of concept, we have developed a linear elastic finite element model (FEM of a rubber membrane whereby the nodal displacements of the membrane points are measured using vision. These nodal displacements are the input into our finite element model. In the first experiment, we track the deformation of the membrane in real-time through stereovision and compare it with the actual deformation computed through forward kinematics of the robot arm. On the basis of accurate deformation estimation through vision, we test the physical model of a membrane developed through finite element techniques. The FEM model accurately reflects the interaction forces on the user console when the interaction forces of the robot arm with the membrane are compared with those experienced by the surgeon on the console through the force feedback device. In the second experiment, the PHANToM haptic interface device is used to control the Mitsubishi PA-10 robot arm and interact with the membrane in real-time. Image data obtained through vision of the deformation of the membrane is used as the displacement input for the FEM model to compute the local interaction forces which are then displayed on the user console for providing force feedback and hence closing the loop.

  14. QCM-based rupture force measurement as a tool to study DNA dehybridization and duplex stability.

    Science.gov (United States)

    Dultsev, Fedor N; Kolosovsky, Eugeny A; Lomzov, Alexander A; Pyshnyi, Dmitrii V

    2017-02-01

    The stability of double-stranded DNA (dsDNA) was assessed on the basis of unwinding force measurement. Unwinding force was measured directly with a quartz crystal microbalance (QCM). The amplitude of its surface oscillations was controlled by supplying variable alternate voltage. Under smoothly increasing amplitude of QCM surface oscillations, dsDNA fixed on QCM surface through one of its ends got unwound. This procedure allows reliable measurement of rupture force as small as 5-10 pN. It was demonstrated that oscillations of the surface, with dsDNA bound through one of its ends to this surface, at a frequency of 14 MHz, cause helix unwinding to form two complementary parts due to viscous forces of the liquid medium. Unwinding starts at the upper end. This was proven using oligonucleotide duplexes containing mismatches in different positions. For duplexes containing complementary 20 base pairs, the helix unwinding force is equal to 30-40 pN, which is in agreement with the data obtained by means of atomic-force microscopy (AFM) for the case of unzipping mode. Graphical Abstract Rupture force depending on mismatch position in dsDNA.

  15. Testing a Non-Competency Inservice Education Model Based on Humanistic or Third Force Psychology

    Science.gov (United States)

    Beck, William

    1978-01-01

    The investigation of the impact of the "growth" approach, based on humanistic or Third Force psychology, involved developing a "growth" model based on humanistic psychology, pilot "testing" the model, and drawing implications regarding the model's potential for inservice education. The data indicated that the "growth" approach to inservice…

  16. Development of a quartz tuning-fork-based force sensor for measurements in the tens of nanoNewton force range during nanomanipulation experiments

    Energy Technology Data Exchange (ETDEWEB)

    Oiko, V. T. A., E-mail: oiko@ifi.unicamp.br; Rodrigues, V.; Ugarte, D. [Instituto de Física “Gleb Wataghin,” Univ. Estadual de Campinas (UNICAMP), Campinas 13083-859 (Brazil); Martins, B. V. C. [Department of Physics, University of Alberta, Edmonton, Alberta T6G 2R3 (Canada); Silva, P. C. [Laboratório Nacional de Nanotecnologia, CNPEM, Campinas 13083-970 (Brazil)

    2014-03-15

    Understanding the mechanical properties of nanoscale systems requires new experimental and theoretical tools. In particular, force sensors compatible with nanomechanical testing experiments and with sensitivity in the nN range are required. Here, we report the development and testing of a tuning-fork-based force sensor for in situ nanomanipulation experiments inside a scanning electron microscope. The sensor uses a very simple design for the electronics and it allows the direct and quantitative force measurement in the 1–100 nN force range. The sensor response is initially calibrated against a nN range force standard, as, for example, a calibrated Atomic Force Microscopy cantilever; subsequently, applied force values can be directly derived using only the electric signals generated by the tuning fork. Using a homemade nanomanipulator, the quantitative force sensor has been used to analyze the mechanical deformation of multi-walled carbon nanotube bundles, where we analyzed forces in the 5–40 nN range, measured with an error bar of a few nN.

  17. Environmental Assessment for Mill Creek Restoration Project, Eglin Air Force Base, FL

    Science.gov (United States)

    2007-02-28

    slope. These factors are essential components for any stream restoration project. Successful stream restoration applies fluvial geomorphology ...Central Florida Press, Orlando, Florida, 765 p. Rosgen, D. 1996. Applied River Morphology. Wildland Hydrology, Pagosa Springs, Colorado . Rosgen, D...originally was connected with the valley floodplain, but now ponds exist upstream of each culvert changing fluvial dynamics from lotic to lentic

  18. Multi-Axis Force/Torque Sensor Based on Simply-Supported Beam and Optoelectronics.

    Science.gov (United States)

    Noh, Yohan; Bimbo, Joao; Sareh, Sina; Wurdemann, Helge; Fraś, Jan; Chathuranga, Damith Suresh; Liu, Hongbin; Housden, James; Althoefer, Kaspar; Rhode, Kawal

    2016-11-17

    This paper presents a multi-axis force/torque sensor based on simply-supported beam and optoelectronic technology. The sensor's main advantages are: (1) Low power consumption; (2) low-level noise in comparison with conventional methods of force sensing (e.g., using strain gauges); (3) the ability to be embedded into different mechanical structures; (4) miniaturisation; (5) simple manufacture and customisation to fit a wide-range of robot systems; and (6) low-cost fabrication and assembly of sensor structure. For these reasons, the proposed multi-axis force/torque sensor can be used in a wide range of application areas including medical robotics, manufacturing, and areas involving human-robot interaction. This paper shows the application of our concept of a force/torque sensor to flexible continuum manipulators: A cylindrical MIS (Minimally Invasive Surgery) robot, and includes its design, fabrication, and evaluation tests.

  19. Multi-Axis Force/Torque Sensor Based on Simply-Supported Beam and Optoelectronics

    Directory of Open Access Journals (Sweden)

    Yohan Noh

    2016-11-01

    Full Text Available This paper presents a multi-axis force/torque sensor based on simply-supported beam and optoelectronic technology. The sensor’s main advantages are: (1 Low power consumption; (2 low-level noise in comparison with conventional methods of force sensing (e.g., using strain gauges; (3 the ability to be embedded into different mechanical structures; (4 miniaturisation; (5 simple manufacture and customisation to fit a wide-range of robot systems; and (6 low-cost fabrication and assembly of sensor structure. For these reasons, the proposed multi-axis force/torque sensor can be used in a wide range of application areas including medical robotics, manufacturing, and areas involving human–robot interaction. This paper shows the application of our concept of a force/torque sensor to flexible continuum manipulators: A cylindrical MIS (Minimally Invasive Surgery robot, and includes its design, fabrication, and evaluation tests.

  20. A computed torque method based attitude control with optimal force distribution for articulated body mobile robots

    International Nuclear Information System (INIS)

    Fukushima, Edwardo F.; Hirose, Shigeo

    2000-01-01

    This paper introduces an attitude control scheme based in optimal force distribution using quadratic programming which minimizes joint energy consumption. This method shares similarities with force distribution for multifingered hands, multiple coordinated manipulators and legged walking robots. In particular, an attitude control scheme was introduced inside the force distribution problem, and successfully implemented for control of the articulated body mobile robot KR-II. This is an actual mobile robot composed of cylindrical segments linked in series by prismatic joints and has a long snake-like appearance. These prismatic joints are force controlled so that each segment's vertical motion can automatically follow the terrain irregularities. An attitude control is necessary because this system acts like a system of wheeled inverted pendulum carts connected in series, being unstable by nature. The validity and effectiveness of the proposed method is verified by computer simulation and experiments with the robot KR-II. (author)

  1. Reciprocity-based experimental determination of dynamic forces and moments: A feasibility study

    Science.gov (United States)

    Ver, Istvan L.; Howe, Michael S.

    1994-01-01

    BBN Systems and Technologies has been tasked by the Georgia Tech Research Center to carry Task Assignment No. 7 for the NASA Langley Research Center to explore the feasibility of 'In-Situ Experimental Evaluation of the Source Strength of Complex Vibration Sources Utilizing Reciprocity.' The task was carried out under NASA Contract No. NAS1-19061. In flight it is not feasible to connect the vibration sources to their mounting points on the fuselage through force gauges to measure dynamic forces and moments directly. However, it is possible to measure the interior sound field or vibration response caused by these structureborne sound sources at many locations and invoke principle of reciprocity to predict the dynamic forces and moments. The work carried out in the framework of Task 7 was directed to explore the feasibility of reciprocity-based measurements of vibration forces and moments.

  2. Phase-resolved fluid dynamic forces of a flapping foil energy harvester based on PIV measurements

    Science.gov (United States)

    Liburdy, James

    2017-11-01

    Two-dimensional particle image velocimetry measurements are performed in a wind tunnel to evaluate the spatial and temporal fluid dynamic forces acting on a flapping foil operating in the energy harvesting regime. Experiments are conducted at reduced frequencies (k = fc/U) of 0.05 - 0.2, pitching angle of, and heaving amplitude of A / c = 0.6. The phase-averaged pressure field is obtained by integrating the pressure Poisson equation. Fluid dynamic forces are then obtained through the integral momentum equation. Results are compared with a simple force model based on the concept of flow impulse. These results help to show the detailed force distributions, their transient nature and aide in understanding the impact of the fluid flow structures that contribute to the power production.

  3. A radial distribution function-based open boundary force model for multi-centered molecules

    KAUST Repository

    Neumann, Philipp

    2014-06-01

    We derive an expression for radial distribution function (RDF)-based open boundary forcing for molecules with multiple interaction sites. Due to the high-dimensionality of the molecule configuration space and missing rotational invariance, a computationally cheap, 1D approximation of the arising integral expressions as in the single-centered case is not possible anymore. We propose a simple, yet accurate model invoking standard molecule- and site-based RDFs to approximate the respective integral equation. The new open boundary force model is validated for ethane in different scenarios and shows very good agreement with data from periodic simulations. © World Scientific Publishing Company.

  4. Shear force bond analysis between acrylic resin bases and retention framework (open- and mesh-type)

    Science.gov (United States)

    Royhan, A.; Indrasari, M.; Masulili, C.

    2017-08-01

    Occlusions between teeth and the activity of the muscles around an artificial tooth during mastication create a force on dentures. This force causes friction between acrylic resin bases and retention frameworks that can lead to the complete loss of the acrylic resin base from the framework. The purpose of this study was to analyze the design of retention frameworks and determine which ones have a better resistance to shear forces in order to prevent the loss of heat cured acrylic resin base (HCARB). Six samples each of open-and mesh-type retention frameworks, both types made of Co-Cr material, and HCARB, were shear tested by means of a universal testing machine. The average shear force required to release the HCARB for mesh-type retention frameworks was 28.84 kgf, and the average for the open-type was 26.52 kgf. There was no significant difference between the shear forces required to remove HCARB from open- and mesh-type retention frameworks.

  5. Effects of antagonistic co-contraction on differences between electromyography based and optimization based estimates of spinal forces

    NARCIS (Netherlands)

    van Dieen, J.H.; Kingma, I.

    2005-01-01

    Estimates of spinal forces are quite sensitive to model assumptions, especially regarding antagonistic co-contraction. Optimization based models predict co-contraction to be absent, while electromyography (EMG) based models take co-contraction into account, but usually assume equal activation of

  6. Radial electromagnetic force calculation of induction motor based on multi-loop theory

    Directory of Open Access Journals (Sweden)

    HE Haibo

    2017-12-01

    Full Text Available [Objectives] In order to study the vibration and noise of induction motors, a method of radial electromagnetic force calculation is established on the basis of the multi-loop model.[Methods] Based on the method of calculating air-gap magneto motive force according to stator and rotor fundamental wave current, the analytic formulas are deduced for calculating the air-gap magneto motive force and radial electromagnetic force generated in accordance with any stator winding and rotor conducting bar current. The multi-loop theory and calculation method for the electromagnetic parameters of a motor are introduced, and a dynamic simulation model of an induction motor built to achieve the current of the stator winding and rotor conducting bars, and obtain the calculation formula of radial electromagnetic force. The radial electromagnetic force and vibration are then estimated.[Results] The experimental results indicate that the vibration acceleration frequency and amplitude of the motor are consistent with the experimental results.[Conclusions] The results and calculation method can support the low noise design of converters.

  7. Moving force identification based on redundant concatenated dictionary and weighted l1-norm regularization

    Science.gov (United States)

    Pan, Chu-Dong; Yu, Ling; Liu, Huan-Lin; Chen, Ze-Peng; Luo, Wen-Feng

    2018-01-01

    Moving force identification (MFI) is an important inverse problem in the field of bridge structural health monitoring (SHM). Reasonable signal structures of moving forces are rarely considered in the existing MFI methods. Interaction forces are complex because they contain both slowly-varying harmonic and impact signals due to bridge vibration and bumps on a bridge deck, respectively. Therefore, the interaction forces are usually hard to be expressed completely and sparsely by using a single basis function set. Based on the redundant concatenated dictionary and weighted l1-norm regularization method, a hybrid method is proposed for MFI in this study. The redundant dictionary consists of both trigonometric functions and rectangular functions used for matching the harmonic and impact signal features of unknown moving forces. The weighted l1-norm regularization method is introduced for formulation of MFI equation, so that the signal features of moving forces can be accurately extracted. The fast iterative shrinkage-thresholding algorithm (FISTA) is used for solving the MFI problem. The optimal regularization parameter is appropriately chosen by the Bayesian information criterion (BIC) method. In order to assess the accuracy and the feasibility of the proposed method, a simply-supported beam bridge subjected to a moving force is taken as an example for numerical simulations. Finally, a series of experimental studies on MFI of a steel beam are performed in laboratory. Both numerical and experimental results show that the proposed method can accurately identify the moving forces with a strong robustness, and it has a better performance than the Tikhonov regularization method. Some related issues are discussed as well.

  8. A Modernized UDM-600 Dynamometer-Based Setup for the Cutting Force Measurement

    Directory of Open Access Journals (Sweden)

    Ya. I. Shuliak

    2016-01-01

    Full Text Available The article considers development of a modernized UDM-600 dynamometer-based setup for measuring the cutting force components. Modernization of existing equipment to improve the method of recording the cutting force components in the automated mode is of relevance. The measuring setup allows recording the cutting force components in turning and milling, as well as the axial force and the torque in the drilling and milling operations.The article presents a block diagram and a schematic diagram of the setup to measure the cutting force components, and describes a basic principle of measuring units within the modernized setup. The developed setup uses a half-bridge strain gauge measuring circuit to record the cutting forces. To enhance the measuring circuit output voltage is used a 16-channel amplifier of LA-UN16 model with a discretely adjustable gain. To record and process electrical signals is used a data acquisition device of NI USB-6009 model, which enables transmitting the received data to a PC via USB-interface. The data acquisition device has a built-in stabilized DC power supply that is used to power the strain gauge bridges. A developed schematic diagram of the measuring setup allows us to realize this measuring device and implement its modernization.Final processing of recorded data is provided through the software developed in visual programming environment LabVIEW 9.0. The program allows us to show the real-time measuring values of the cutting force components graphically and to record the taken data to a text file.The measuring setup modernization enabled increasing measurement accuracy and reducing time for processing and analysis of experimental data obtained when measuring the cutting force components. The MT2 Department of BMSTU uses it in education and research activities and in experimental efforts and laboratory classes.

  9. Information driving force and its application in agent-based modeling

    Science.gov (United States)

    Chen, Ting-Ting; Zheng, Bo; Li, Yan; Jiang, Xiong-Fei

    2018-04-01

    Exploring the scientific impact of online big-data has attracted much attention of researchers from different fields in recent years. Complex financial systems are typical open systems profoundly influenced by the external information. Based on the large-scale data in the public media and stock markets, we first define an information driving force, and analyze how it affects the complex financial system. The information driving force is observed to be asymmetric in the bull and bear market states. As an application, we then propose an agent-based model driven by the information driving force. Especially, all the key parameters are determined from the empirical analysis rather than from statistical fitting of the simulation results. With our model, both the stationary properties and non-stationary dynamic behaviors are simulated. Considering the mean-field effect of the external information, we also propose a few-body model to simulate the financial market in the laboratory.

  10. A pairwise residue contact area-based mean force potential for discrimination of native protein structure

    Directory of Open Access Journals (Sweden)

    Pezeshk Hamid

    2010-01-01

    Full Text Available Abstract Background Considering energy function to detect a correct protein fold from incorrect ones is very important for protein structure prediction and protein folding. Knowledge-based mean force potentials are certainly the most popular type of interaction function for protein threading. They are derived from statistical analyses of interacting groups in experimentally determined protein structures. These potentials are developed at the atom or the amino acid level. Based on orientation dependent contact area, a new type of knowledge-based mean force potential has been developed. Results We developed a new approach to calculate a knowledge-based potential of mean-force, using pairwise residue contact area. To test the performance of our approach, we performed it on several decoy sets to measure its ability to discriminate native structure from decoys. This potential has been able to distinguish native structures from the decoys in the most cases. Further, the calculated Z-scores were quite high for all protein datasets. Conclusions This knowledge-based potential of mean force can be used in protein structure prediction, fold recognition, comparative modelling and molecular recognition. The program is available at http://www.bioinf.cs.ipm.ac.ir/softwares/surfield

  11. Landscape unit based digital elevation model development for the freshwater wetlands within the Arthur C. Marshall Loxahatchee National Wildlife Refuge, Southeastern Florida

    Science.gov (United States)

    Xie, Zhixiao; Liu, Zhongwei; Jones, John W.; Higer, Aaron L.; Telis, Pamela A.

    2011-01-01

    The hydrologic regime is a critical limiting factor in the delicate ecosystem of the greater Everglades freshwater wetlands in south Florida that has been severely altered by management activities in the past several decades. "Getting the water right" is regarded as the key to successful restoration of this unique wetland ecosystem. An essential component to represent and model its hydrologic regime, specifically water depth, is an accurate ground Digital Elevation Model (DEM). The Everglades Depth Estimation Network (EDEN) supplies important hydrologic data, and its products (including a ground DEM) have been well received by scientists and resource managers involved in Everglades restoration. This study improves the EDEN DEMs of the Loxahatchee National Wildlife Refuge, also known as Water Conservation Area 1 (WCA1), by adopting a landscape unit (LU) based interpolation approach. The study first filtered the input elevation data based on newly available vegetation data, and then created a separate geostatistical model (universal kriging) for each LU. The resultant DEMs have encouraging cross-validation and validation results, especially since the validation is based on an independent elevation dataset (derived by subtracting water depth measurements from EDEN water surface elevations). The DEM product of this study will directly benefit hydrologic and ecological studies as well as restoration efforts. The study will also be valuable for a broad range of wetland studies.

  12. Consequences of Forcing Consumers to Use Technology-Based Self-Service

    NARCIS (Netherlands)

    Reinders, M.J.; Dabholkar, P.A.; Frambach, R.T.

    2008-01-01

    Today, traditional full service is increasingly replaced with technology-based self-service (TBSS), sometimes with no other option for service delivery. This study develops a conceptual model to investigate the impact of forcing consumers to use TBSS. The model is tested using an experimental design

  13. Environmental Assessment for a Taxiway M Bypass Road at Travis Air Force Base, California

    Science.gov (United States)

    2011-10-01

    Ardea herodias), crows (Corvus brachyrhynchos), ravens (Corvus corax), garter snakes (Thamnophis species), bullfrogs ( Rana catesbeiana ), California...Tiger Salamander Habitat Assessment at Travis Air Force Base, Solano County, California Rana Resources 2005 Results of First Year Special-Status...Athene cunicularia Burrowing owl CSC Known Rana aurora draytonii California red-legged frog FT Potential Ambystoma californiense California tiger

  14. 33 CFR 334.560 - Banana River at Patrick Air Force Base, Fla.; restricted area.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Banana River at Patrick Air Force Base, Fla.; restricted area. 334.560 Section 334.560 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE DANGER ZONE AND RESTRICTED AREA REGULATIONS § 334.560 Banana...

  15. Modelling Inter-Particle Forces and Resulting Agglomerate Sizes in Cement-Based Materials

    DEFF Research Database (Denmark)

    Kjeldsen, Ane Mette; Geiker, Mette Rica

    2005-01-01

    The theory of inter-particle forces versus external shear in cement-based materials is reviewed. On this basis, calculations on maximum agglomerate size present after the combined action of superplasticizers and shear are carried out. Qualitative experimental results indicate that external shear...

  16. Derivation of energy-based base shear force coefficient considering hysteretic behavior and P-delta effects

    Science.gov (United States)

    Ucar, Taner; Merter, Onur

    2018-01-01

    A modified energy-balance equation accounting for P-delta effects and hysteretic behavior of reinforced concrete members is derived. Reduced hysteretic properties of structural components due to combined stiffness and strength degradation and pinching effects, and hysteretic damping are taken into account in a simple manner by utilizing plastic energy and seismic input energy modification factors. Having a pre-selected yield mechanism, energy balance of structure in inelastic range is considered. P-delta effects are included in derived equation by adding the external work of gravity loads to the work of equivalent inertia forces and equating the total external work to the modified plastic energy. Earthquake energy input to multi degree of freedom (MDOF) system is approximated by using the modal energy-decomposition. Energy-based base shear coefficients are verified by means of both pushover analysis and nonlinear time history (NLTH) analysis of several RC frames having different number of stories. NLTH analyses of frames are performed by using the time histories of ten scaled ground motions compatible with elastic design acceleration spectrum and fulfilling duration/amplitude related requirements of Turkish Seismic Design Code. The observed correlation between energy-based base shear force coefficients and the average base shear force coefficients of NLTH analyses provides a reasonable confidence in estimation of nonlinear base shear force capacity of frames by using the derived equation.

  17. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Florida

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Florida. Moving to the 2015 IECC from the 2012 IECC base code is cost-effective for residential buildings in all climate zones in Florida.

  18. A qualitative analysis of bus simulator training on transit incidents : a case study in Florida.

    Science.gov (United States)

    2013-06-01

    The purpose of this research was to track and observe three Florida public transit agencies as they incorporated and integrated computer-based transit bus simulators into their existing bus operator training programs. In addition to the three Florida...

  19. Design of the arm-wrestling robot's force acquisition system based on Qt

    Science.gov (United States)

    Huo, Zhixiang; Chen, Feng; Wang, Yongtao

    2017-03-01

    As a collection of entertainment and medical rehabilitation in a robot, the research on the arm-wrestling robot is of great significance. In order to achieve the collection of the arm-wrestling robot's force signals, the design and implementation of arm-wrestling robot's force acquisition system is introduced in this paper. The system is based on MP4221 data acquisition card and is programmed by Qt. It runs successfully in collecting the analog signals on PC. The interface of the system is simple and the real-time performance is good. The result of the test shows the feasibility in arm-wrestling robot.

  20. Superhydrophobic Zr-based metallic glass surface with high adhesive force

    Science.gov (United States)

    Li, Ning; Xia, Ting; Heng, Liping; Liu, Lin

    2013-06-01

    Micro/nano hierarchical structures were constructed on Zr35Ti30Be26.75Cu8.25 metallic glass surface by silicon moulding and subsequently chemical etching. The as-formed surface exhibited both superhydrophobicity and high adhesive force towards water. The superhydrophobicity is rationalized based on the modified Cassie-Baxter model [A. B. D. Cassie and S. Baxter, Trans. Faraday Soc. 40, 546 (1944)]. The origin of the robust adhesion is described in terms of intermolecular capillary forces. The present results not only provide a method to fabricate superhydrophobic metallic glasses surface but also explore an important industrial application as dry adhesives and transport of liquid microdroplets.

  1. Mountain Home Air Force Base, Idaho Geothermal Resource Assessment and Future Recommendations

    Energy Technology Data Exchange (ETDEWEB)

    Joseph C. Armstrong; Robert P. Breckenridge; Dennis L. Nielson; John W. Shervais; Thomas R. Wood

    2013-03-01

    The U.S. Air Force is facing a number of challenges as it moves into the future, one of the biggest being how to provide safe and secure energy to support base operations. A team of scientists and engineers met at Mountain Home Air Force Base in early 2011 near Boise, Idaho, to discuss the possibility of exploring for geothermal resources under the base. The team identified that there was a reasonable potential for geothermal resources based on data from an existing well. In addition, a regional gravity map helped identify several possible locations for drilling a new well. The team identified several possible sources of funding for this well—the most logical being to use U.S. Department of Energy funds to drill the upper half of the well and U.S. Air Force funds to drill the bottom half of the well. The well was designed as a slimhole well in accordance with State of Idaho Department of Water Resources rules and regulations. Drilling operations commenced at the Mountain Home site in July of 2011 and were completed in January of 2012. Temperatures increased gradually, especially below a depth of 2000 ft. Temperatures increased more rapidly below a depth of 5500 ft. The bottom of the well is at 5976 ft, where a temperature of about 140°C was recorded. The well flowed artesian from a depth below 5600 ft, until it was plugged off with drilling mud. Core samples were collected from the well and are being analyzed to help understand permeability at depth. Additional tests using a televiewer system will be run to evaluate orientation and directions at fractures, especially in the production zone. A final report on the well exploitation will be forthcoming later this year. The Air Force will use it to evaluate the geothermal resource potential for future private development options at Mountain Home Air Force Base. In conclusion, Recommendation for follow-up efforts include the following:

  2. Design and Synthesis of Distillation Systems using a Driving Force Based Approach

    DEFF Research Database (Denmark)

    Bek-Pedersen, Erik; Gani, Rafiqul

    2004-01-01

    A new integrated framework for synthesis, design and operation of distillation-based separation schemes is presented here. This framework is based on the driving force approach, which provides a measure of the differences in chemical/physical properties between two co-existing phases in a separat......A new integrated framework for synthesis, design and operation of distillation-based separation schemes is presented here. This framework is based on the driving force approach, which provides a measure of the differences in chemical/physical properties between two co-existing phases...... in a separation unit. A set of algorithms has been developed within this framework for design of simple as well as complex distillation columns, for the sequencing of distillation trains, for the determination of appropriate conditions of operation and for retrofit of distillation columns. The main feature of all...

  3. Laser apparatus for surgery and force therapy based on high-power semiconductor and fibre lasers

    International Nuclear Information System (INIS)

    Minaev, V P

    2005-01-01

    High-power semiconductor lasers and diode-pumped lasers are considered whose development qualitatively improved the characteristics of laser apparatus for surgery and force therapy, extended the scope of their applications in clinical practice, and enhanced the efficiency of medical treatment based on the use of these lasers. The characteristics of domestic apparatus are presented and their properties related to the laser emission wavelength used in them are discussed. Examples of modern medical technologies based on these lasers are considered. (invited paper)

  4. Impedance-Based Cable Force Monitoring in Tendon-Anchorage Using Portable PZT-Interface Technique

    Directory of Open Access Journals (Sweden)

    Thanh-Canh Huynh

    2014-01-01

    Full Text Available In this paper, a portable PZT interface for tension force monitoring in the cable-anchorage subsystem is developed. Firstly, the theoretical background of the impedance-based method is presented. A few damage evaluation approaches are outlined to quantify the variation of impedance signatures. Secondly, a portable PZT interface is designed to monitor impedance signatures from the cable-anchorage subsystem. One degree-of-freedom analytical model of the PZT interface is established to explain how to represent the loss of cable force from the change in the electromechanical impedance of the PZT interface as well as reducing the sensitive frequency band by implementing the interface device. Finally, the applicability of the proposed PZT-interface technique is experimentally evaluated for cable force-loss monitoring in a lab-scaled test structure.

  5. Force control of a magnetorheological damper using an elementary hysteresis model-based feedforward neural network

    International Nuclear Information System (INIS)

    Ekkachai, Kittipong; Nilkhamhang, Itthisek; Tungpimolrut, Kanokvate

    2013-01-01

    An inverse controller is proposed for a magnetorheological (MR) damper that consists of a hysteresis model and a voltage controller. The force characteristics of the MR damper caused by excitation signals are represented by a feedforward neural network (FNN) with an elementary hysteresis model (EHM). The voltage controller is constructed using another FNN to calculate a suitable input signal that will allow the MR damper to produce the desired damping force. The performance of the proposed EHM-based FNN controller is experimentally compared to existing control methodologies, such as clipped-optimal control, signum function control, conventional FNN, and recurrent neural network with displacement or velocity inputs. The results show that the proposed controller, which does not require force feedback to implement, provides excellent accuracy, fast response time, and lower energy consumption. (paper)

  6. Determination of Quantum Chemistry Based Force Fields for Molecular Dynamics Simulations of Aromatic Polymers

    Science.gov (United States)

    Jaffe, Richard; Langhoff, Stephen R. (Technical Monitor)

    1995-01-01

    Ab initio quantum chemistry calculations for model molecules can be used to parameterize force fields for molecular dynamics simulations of polymers. Emphasis in our research group is on using quantum chemistry-based force fields for molecular dynamics simulations of organic polymers in the melt and glassy states, but the methodology is applicable to simulations of small molecules, multicomponent systems and solutions. Special attention is paid to deriving reliable descriptions of the non-bonded and electrostatic interactions. Several procedures have been developed for deriving and calibrating these parameters. Our force fields for aromatic polyimide simulations will be described. In this application, the intermolecular interactions are the critical factor in determining many properties of the polymer (including its color).

  7. PAEA Accreditation Task Force Briefing Paper: Moving Toward Profession-Defined, Outcomes-Based Accreditation.

    Science.gov (United States)

    Bondy, Mary Jo; Fletcher, Sara; Lane, Steven

    2017-12-01

    In anticipation of a revision to the Standards for Accreditation, the Phyisician Assistant Education Association (PAEA) charged a small task force to develop a strategy for engaging its members in the revision process. Rather than focusing on the current Standards, the task force members recommend a backward design approach to determine the desired outcomes of a successful revision to the Standards. Ultimately, the group believes that shifting to a profession-defined, outcomes-based model for accreditation will allow for greater innovation in physician assistant education and reduce the strain on programs facing resource limitations, particularly clinical site shortages. Task force members value accreditation and urge a paradigm shift in the Standards revision process to focus on meaningful educational outcomes that lead to enhanced program quality and patient safety.

  8. Atomic Force Microscopy Based Nanorobotics Modelling, Simulation, Setup Building and Experiments

    CERN Document Server

    Xie, Hui; Régnier, Stéphane; Sitti, Metin

    2012-01-01

    The atomic force microscope (AFM) has been successfully used to perform nanorobotic manipulation operations on nanoscale entities such as particles, nanotubes, nanowires, nanocrystals, and DNA since 1990s. There have been many progress on modeling, imaging, teleoperated or automated control, human-machine interfacing, instrumentation, and applications of AFM based nanorobotic manipulation systems in literature. This book aims to include all of such state-of-the-art progress in an organized, structured, and detailed manner as a reference book and also potentially a textbook in nanorobotics and any other nanoscale dynamics, systems and controls related research and education. Clearly written and well-organized, this text introduces designs and prototypes of the nanorobotic systems in detail with innovative principles of three-dimensional manipulation force microscopy and parallel imaging/manipulation force microscopy.

  9. A Noncontact Force Sensor Based on a Fiber Bragg Grating and Its Application for Corrosion Measurement

    Directory of Open Access Journals (Sweden)

    Antonio C. Bruno

    2013-08-01

    Full Text Available A simple noncontact force sensor based on an optical fiber Bragg grating attached to a small magnet has been proposed and built. The sensor measures the force between the magnet and any ferromagnetic material placed within a few millimeters of the sensor. Maintaining the sensor at a constant standoff distance, material loss due to corrosion increases the distance between the magnet and the corroded surface, which decreases the magnetic force. This will decrease the strain in the optical fiber shifting the reflected Bragg wavelength. The measured shift for the optical fiber used was 1.36 nm per Newton. Models were developed to optimize the magnet geometry for a specific sensor standoff distance and for particular corrosion pit depths. The sensor was able to detect corrosion pits on a fuel storage tank bottom with depths in the sub-millimeter range.

  10. AUTOMATED FORCE FIELD PARAMETERIZATION FOR NON-POLARIZABLE AND POLARIZABLE ATOMIC MODELS BASED ONAB INITIOTARGET DATA.

    Science.gov (United States)

    Huang, Lei; Roux, Benoît

    2013-08-13

    Classical molecular dynamics (MD) simulations based on atomistic models are increasingly used to study a wide range of biological systems. A prerequisite for meaningful results from such simulations is an accurate molecular mechanical force field. Most biomolecular simulations are currently based on the widely used AMBER and CHARMM force fields, which were parameterized and optimized to cover a small set of basic compounds corresponding to the natural amino acids and nucleic acid bases. Atomic models of additional compounds are commonly generated by analogy to the parameter set of a given force field. While this procedure yields models that are internally consistent, the accuracy of the resulting models can be limited. In this work, we propose a method, General Automated Atomic Model Parameterization (GAAMP), for generating automatically the parameters of atomic models of small molecules using the results from ab initio quantum mechanical (QM) calculations as target data. Force fields that were previously developed for a wide range of model compounds serve as initial guess, although any of the final parameter can be optimized. The electrostatic parameters (partial charges, polarizabilities and shielding) are optimized on the basis of QM electrostatic potential (ESP) and, if applicable, the interaction energies between the compound and water molecules. The soft dihedrals are automatically identified and parameterized by targeting QM dihedral scans as well as the energies of stable conformers. To validate the approach, the solvation free energy is calculated for more than 200 small molecules and MD simulations of 3 different proteins are carried out.

  11. Kinetic analysis of ski turns based on measured ground reaction forces.

    Science.gov (United States)

    Vaverka, Frantisek; Vodickova, Sona; Elfmark, Milan

    2012-02-01

    The objective of this study was to devise a method of kinetic analysis of the ground reaction force that enables the durations and magnitudes of forces acting during the individual phases of ski turns to be described exactly. The method is based on a theoretical analysis of physical forces acting during the ski turn. Two elementary phases were defined: (1) preparing to turn (initiation) and (2) actual turning, during which the center of gravity of the skier-ski system moves along a curvilinear trajectory (steering). The starting point of the turn analysis is a dynamometric record of the resultant acting ground reaction force applied perpendicularly on the ski surface. The method was applied to six expert skiers. They completed a slalom course comprising five gates arranged on the fall line of a 26° slope at a competition speed using symmetrical carving turns (30 evaluated turns). A dynamometric measurement system was placed on the carving skis (168 cm long, radius 16 m, data were recorded at 100 Hz). MATLAB procedures were used to evaluate eight variables during each turn: five time variables and three force variables. Comparison of the turn analysis results between individuals showed that the method is useful for answering various research questions associated with ski turns.

  12. Cogging force rejection method of linear motor based on internal model principle

    Science.gov (United States)

    Liu, Yang; Chen, Zhenyu; Yang, Tianbo

    2015-02-01

    The cogging force disturbance of linear motor is one of the main factors affecting the positioning accuracy of ultraprecision moving platform. And this drawback could not be completely overcome by improving the design of motor body, such as location modification of permanent magnet array, or optimization design of the shape of teeth-slot. So the active compensation algorithms become prevalent in cogging force rejection area. This paper proposed a control structure based on internal mode principle to attenuate the cogging force of linear motor which deteriorated the accuracy of position, and this structure could make tracking and anti-disturbing performance of close-loop designed respectively. In the first place, the cogging force was seen as the intrinsic property of linear motor and its model constituting controlled object with motor ontology model was obtained by data driven recursive identification method. Then, a control structure was designed to accommodate tracking and anti-interference ability separately by using internal model principle. Finally, the proposed method was verified in a long stroke moving platform driven by linear motor. The experiment results show that, by employing this control strategy, the positioning error caused by cogging force was decreased by 70%.

  13. A Polarizable Atomic Multipole-Based Force Field for Molecular Dynamics Simulations of Anionic Lipids.

    Science.gov (United States)

    Chu, Huiying; Peng, Xiangda; Li, Yan; Zhang, Yuebin; Li, Guohui

    2017-12-31

    In all of the classical force fields, electrostatic interaction is simply treated and explicit electronic polarizability is neglected. The condensed-phase polarization, relative to the gas-phase charge distributions, is commonly accounted for in an average way by increasing the atomic charges, which remain fixed throughout simulations. Based on the lipid polarizable force field DMPC and following the same framework as Atomic Multipole Optimized Energetics for BiomoleculAr (AMOEBA) simulation, the present effort expands the force field to new anionic lipid models, in which the new lipids contain DMPG and POPS. The parameters are compatible with the AMOEBA force field, which includes water, ions, proteins, etc. The charge distribution of each atom is represented by the permanent atomic monopole, dipole and quadrupole moments, which are derived from the ab initio gas phase calculations. Many-body polarization including the inter- and intramolecular polarization is modeled in a consistent manner with distributed atomic polarizabilities. Molecular dynamics simulations of the two aqueous DMPG and POPS membrane bilayer systems, consisting of 72 lipids with water molecules, were then carried out to validate the force field parameters. Membrane width, area per lipid, volume per lipid, deuterium order parameters, electron density profile, electrostatic potential difference between the center of the bilayer and water are all calculated, and compared with limited experimental data.

  14. An ultra-fast EOD-based force-clamp detects rapid biomechanical transitions

    Science.gov (United States)

    Woody, Michael S.; Capitanio, Marco; Ostap, E. Michael; Goldman, Yale E.

    2017-08-01

    We assembled an ultra-fast infrared optical trapping system to detect mechanical events that occur less than a millisecond after a ligand binds to its filamentous substrate, such as myosin undergoing its 5 - 10 nm working stroke after actin binding. The instrument is based on the concept of Capitanio et al.1, in which a polymer bead-actin-bead dumbbell is held in two force-clamped optical traps. A force applied by the traps causes the filament to move at a constant velocity as hydrodynamic drag balances the applied load. When the ligand binds, the filament motion stops within 100 μs as the total force from the optical traps is transferred to the attachment. Subsequent translations signal active motions, such as the magnitude and timing of the motor's working stroke. In our instrument, the beads defining the dumbbell are held in independent force clamps utilizing a field-programmable gate array (FPGA) to update the trap beam positions at 250 kHz. We found that in our setup, acousto-optical deflectors (AODs) steering the beams were unsuitable for this purpose due to a slightly non-linear response in the beam intensity and deflection angle vs. the AOD ultra-sound wavelength, likely caused by low-amplitude standing acoustic waves in the deflectors. These aberrations caused instability in the force feedback loops leading to artefactual 20 nm jumps in position. This type of AOD non-linearity has been reported to be absent in electro-optical deflectors (EODs)2. We demonstrate that replacement of the AODs with EODs improves the performance of our instrument. Combining the superior beam-steering capability of the EODs, force acquisition via back-plane interferometry, and the dual high-speed FPGA-based feedback loops, we smoothly and precisely apply constant loads to study the dynamics of interactions between biological molecules such as actin and myosin.

  15. Climate responses to SATIRE and SIM-based spectral solar forcing in a 3D atmosphere-ocean coupled GCM

    Science.gov (United States)

    Wen, Guoyong; Cahalan, Robert F.; Rind, David; Jonas, Jeffrey; Pilewskie, Peter; Wu, Dong L.; Krivova, Natalie A.

    2017-03-01

    We apply two reconstructed spectral solar forcing scenarios, one SIM (Spectral Irradiance Monitor) based, the other the SATIRE (Spectral And Total Irradiance REconstruction) modeled, as inputs to the GISS (Goddard Institute for Space Studies) GCMAM (Global Climate Middle Atmosphere Model) to examine climate responses on decadal to centennial time scales, focusing on quantifying the difference of climate response between the two solar forcing scenarios. We run the GCMAM for about 400 years with present day trace gas and aerosol for the two solar forcing inputs. We find that the SIM-based solar forcing induces much larger long-term response and 11-year variation in global averaged stratospheric temperature and column ozone. We find significant decreasing trends of planetary albedo for both forcing scenarios in the 400-year model runs. However the mechanisms for the decrease are very different. For SATIRE solar forcing, the decreasing trend of planetary albedo is associated with changes in cloud cover. For SIM-based solar forcing, without significant change in cloud cover on centennial and longer time scales, the apparent decreasing trend of planetary albedo is mainly due to out-of-phase variation in shortwave radiative forcing proxy (downwelling flux for wavelength >330 nm) and total solar irradiance (TSI). From the Maunder Minimum to present, global averaged annual mean surface air temperature has a response of 0.1 °C to SATIRE solar forcing compared to 0.04 °C to SIM-based solar forcing. For 11-year solar cycle, the global surface air temperature response has 3-year lagged response to either forcing scenario. The global surface air 11-year temperature response to SATIRE forcing is about 0.12 °C, similar to recent multi-model estimates, and comparable to the observational-based evidence. However, the global surface air temperature response to 11-year SIM-based solar forcing is insignificant and inconsistent with observation-based evidence.

  16. Robust Operation of Tendon-Driven Robot Fingers Using Force and Position-Based Control Laws

    Science.gov (United States)

    Abdallah, Muhammad E (Inventor); Platt, Jr., Robert J. (Inventor); Reiland, Matthew J (Inventor); Hargrave, Brian (Inventor); Diftler, Myron A (Inventor); Strawser, Philip A (Inventor); Ihrke, Chris A. (Inventor)

    2013-01-01

    A robotic system includes a tendon-driven finger and a control system. The system controls the finger via a force-based control law when a tension sensor is available, and via a position-based control law when a sensor is not available. Multiple tendons may each have a corresponding sensor. The system selectively injects a compliance value into the position-based control law when only some sensors are available. A control system includes a host machine and a non-transitory computer-readable medium having a control process, which is executed by the host machine to control the finger via the force- or position-based control law. A method for controlling the finger includes determining the availability of a tension sensor(s), and selectively controlling the finger, using the control system, via the force or position-based control law. The position control law allows the control system to resist disturbances while nominally maintaining the initial state of internal tendon tensions.

  17. Recognition of Time-Equivalent Leaf-Based Signals of Atmospheric CO2 and El Niño Variability in Florida Wetland Species

    Science.gov (United States)

    Wagner, F.; Dilcher, D. L.; Visscher, H.; Kuerschner, W. M.

    2001-12-01

    Trees are equipped with a plastic phenotype, capable of sustained adjustment of numbers of leaf stomata to changes in atmospheric CO2 concentration. With high temporal resolution and accuracy, stomatal frequency data demonstrate that Holocene climate evolution has been influenced by century-scale CO2 fluctuations. Apart from adapting to changes in atmospheric CO2, leaf-epidermal properties are known to be sensitive to environmental factors such as water availability. In long-lived hygrophilous plants, epidermal tissue expansion is likely to be significantly influenced by changes in water availability. Concurrent analysis of the leaf morphology in CO2 sensitive trees (Myrica, Quercus, Acer) and a water-stress sensitive fern species (Osmunda regalis) from leaf assemblages preserved in peat deposits in Florida (USA), reveal distinct temporal changes in epidermal properties over the past 130 years. Stomatal frequency changes in the deciduous trees reflects the human induced CO2 increase. Epidermal-cell density changes in fern leaves, could well be interpreted in terms of El Niño / La Niña related precipitation trends. By quantifying the leaf morphological adaptation to known environmental conditions during historical times, a new paleobotanical proxy for past precipitation changes is introduced. Hence, in ENSO-sensitive regions, analysis of buried leaf assemblages offers the unique possibility of a direct recognition of time-equivalent leaf-based signals of paleo-atmospheric CO2 and El Niño variability.

  18. Age, growth and population structure of invasive lionfish (Pterois volitans/miles in northeast Florida using a length-based, age-structured population model

    Directory of Open Access Journals (Sweden)

    Eric G. Johnson

    2016-12-01

    Full Text Available The effective management of invasive species requires detailed understanding of the invader’s life history. This information is essential for modeling population growth and predicting rates of expansion, quantifying ecological impacts and assessing the efficacy of removal and control strategies. Indo-Pacific lionfish (Pterois volitans/miles have rapidly invaded the western Atlantic, Gulf of Mexico and Caribbean Sea with documented negative impacts on native ecosystems. To better understand the life history of this species, we developed and validated a length-based, age-structured model to investigate age, growth and population structure in northeast Florida. The main findings of this study were: (1 lionfish exhibited rapid growth with seasonal variation in growth rates; (2 distinct cohorts were clearly identifiable in the length-frequency data, suggesting that lionfish are recruiting during a relatively short period in summer; and (3 the majority of lionfish were less than two years old with no lionfish older than three years of age, which may be the result of culling efforts as well as ontogenetic habitat shifts to deeper water.

  19. A droplet-based passive force sensor for remote tactile sensing applications

    Science.gov (United States)

    Nie, Baoqing; Yao, Ting; Zhang, Yiqiu; Liu, Jian; Chen, Xinjian

    2018-01-01

    A droplet-based flexible wireless force sensor has been developed for remote tactile-sensing applications. By integration of a droplet-based capacitive sensing unit and two circular planar coils, this inductor-capacitor (LC) passive sensor offers a platform for the mechanical force detection in a wireless transmitting mode. Under external loads, the membrane surface of the sensor deforms the underlying elastic droplet uniformly, introducing a capacitance response in tens of picofarads. The LC circuit transduces the applied force into corresponding variations of its resonance frequency, which is detected by an external electromagnetic coupling coil. Specifically, the liquid droplet features a mechanosensitive plasticity, which results in an increased device sensitivity as high as 2.72 MHz N-1. The high dielectric property of the droplet endows our sensor with high tolerance for noise and large capacitance values (20-40 pF), the highest value in the literature for the LC passive devices in comparable dimensions. It achieves excellent reproducibility under periodical loads ranging from 0 to 1.56 N and temperature fluctuations ranging from 10 °C to 55 °C. As an interesting conceptual demonstration, the flexible device has been configured into a fingertip-amounted setting in a highly compact package (of 11 mm × 11 mm × 0.25 mm) for remote contact force sensing in the table tennis game.

  20. The Maya of Florida.

    Science.gov (United States)

    Burns, Allan F.

    1989-01-01

    Discusses the Maya people who fled Guatemala due to a civil war and illegally entered the U.S. and settled in Florida. Presents a picture of their living conditions, employment opportunities, cultural traditions, community development, and family organization. Discusses a Kanjobal Association and the CORN-MAYA program, and explains immigration…

  1. Southward flow on the western flank of the Florida Current

    Science.gov (United States)

    Soloviev, Alexander V.; Hirons, Amy; Maingot, Christopher; Dean, Cayla W.; Dodge, Richard E.; Yankovsky, Alexander E.; Wood, Jon; Weisberg, Robert H.; Luther, Mark E.; McCreary, Julian P.

    2017-07-01

    A suite of long-term in situ measurements in the Straits of Florida, including the ADCP bottom moorings at an 11-m isobath and 244-m isobath (Miami Terrace) and several ADCP ship transects, have revealed a remarkable feature of the ocean circulation - southward flow on the western, coastal flank of the Florida Current. We have observed three forms of the southward flow - a seasonally varying coastal countercurrent, an undercurrent jet attached to the Florida shelf, and an intermittent undercurrent on the Miami Terrace. According to a 13-year monthly climatology obtained from the near-shore mooring, the coastal countercurrent is a persistent feature from October through January. The southward flow in the form of an undercurrent jet attached to the continental slope was observed during five ship transects from April through September but was not observed during three transects in February, March, and November. This undercurrent jet is well mixed due to strong shear at its top associated with the northward direction of the surface flow (Florida Current) and friction at the bottom. At the same time, no statistically significant seasonal cycle has been observed in the undercurrent flow on the Miami Terrace. Theoretical considerations suggest that several processes could drive the southward current, including interaction between the Florida Current and the shelf, as well as forcing that is independent of the Florida Current. The exact nature of the southward flow on the western flank of the Florida Current is, however, unknown.

  2. Knowledge-Based Trajectory Error Pattern Method Applied to an Active Force Control Scheme

    Directory of Open Access Journals (Sweden)

    Endra Pitowarno, Musa Mailah, Hishamuddin Jamaluddin

    2012-08-01

    Full Text Available The active force control (AFC method is known as a robust control scheme that dramatically enhances the performance of a robot arm particularly in compensating the disturbance effects. The main task of the AFC method is to estimate the inertia matrix in the feedback loop to provide the correct (motor torque required to cancel out these disturbances. Several intelligent control schemes have already been introduced to enhance the estimation methods of acquiring the inertia matrix such as those using neural network, iterative learning and fuzzy logic. In this paper, we propose an alternative scheme called Knowledge-Based Trajectory Error Pattern Method (KBTEPM to suppress the trajectory track error of the AFC scheme. The knowledge is developed from the trajectory track error characteristic based on the previous experimental results of the crude approximation method. It produces a unique, new and desirable error pattern when a trajectory command is forced. An experimental study was performed using simulation work on the AFC scheme with KBTEPM applied to a two-planar manipulator in which a set of rule-based algorithm is derived. A number of previous AFC schemes are also reviewed as benchmark. The simulation results show that the AFC-KBTEPM scheme successfully reduces the trajectory track error significantly even in the presence of the introduced disturbances.Key Words:  Active force control, estimated inertia matrix, robot arm, trajectory error pattern, knowledge-based.

  3. Measurement-based aerosol forcing calculations: The influence of model complexity

    Directory of Open Access Journals (Sweden)

    Manfred Wendisch

    2001-03-01

    Full Text Available On the basis of ground-based microphysical and chemical aerosol measurements a simple 'two-layer-single-wavelength' and a complex 'multiple-layer-multiple-wavelength' radiative transfer model are used to calculate the local solar radiative forcing of black carbon (BC and (NH42SO4 (ammonium sulfate particles and mixtures (external and internal of both materials. The focal points of our approach are (a that the radiative forcing calculations are based on detailed aerosol measurements with special emphasis of particle absorption, and (b the results of the radiative forcing calculations with two different types of models (with regards to model complexity are compared using identical input data. The sensitivity of the radiative forcing due to key input parameters (type of particle mixture, particle growth due to humidity, surface albedo, solar zenith angle, boundary layer height is investigated. It is shown that the model results for external particle mixtures (wet and dry only slightly differ from those of the corresponding internal mixture. This conclusion is valid for the results of both model types and for both surface albedo scenarios considered (grass and snow. Furthermore, it is concluded that the results of the two model types approximately agree if it is assumed that the aerosol particles are composed of pure BC. As soon as a mainly scattering substance is included alone or in (internal or external mixture with BC, the differences between the radiative forcings of both models become significant. This discrepancy results from neglecting multiple scattering effects in the simple radiative transfer model.

  4. Multidirectional flexible force sensors based on confined, self-adjusting carbon nanotube arrays

    Science.gov (United States)

    Lee, J.-I.; Pyo, Soonjae; Kim, Min-Ook; Kim, Jongbaeg

    2018-02-01

    We demonstrate a highly sensitive force sensor based on self-adjusting carbon nanotube (CNT) arrays. Aligned CNT arrays are directly synthesized on silicon microstructures by a space-confined growth technique which enables a facile self-adjusting contact. To afford flexibility and softness, the patterned microstructures with the integrated CNTs are embedded in polydimethylsiloxane structures. The sensing mechanism is based on variations in the contact resistance between the facing CNT arrays under the applied force. By finite element analysis, proper dimensions and positions for each component are determined. Further, high sensitivities up to 15.05%/mN of the proposed sensors were confirmed experimentally. Multidirectional sensing capability could also be achieved by designing multiple sets of sensing elements in a single sensor. The sensors show long-term operational stability, owing to the unique properties of the constituent CNTs, such as outstanding mechanical durability and elasticity.

  5. Radioactive waste disposal sites: Two successful closures at Tinker Air Force Base

    International Nuclear Information System (INIS)

    McKenzie, G.; Mohatt, J.V.; Kowall, S.J.; Jarvis, M.F.

    1993-06-01

    This article describes remediation and closure of two radioactive waste disposal sites at Tinker Air Force Base, Oklahoma, making them exemption regulatory control. The approach consisted of careful exhumation and assessment of soils in sites expected to be contaminated based on historical documentation, word of mouth, and geophysical surveys; removal of buried objects that had gamma radiation exposure levels above background; and confirmation that the soil containing residual radium-226 was below an activity level equal to no more than a 10 mrem/yr annual dose equivalent. In addition, 4464 kg of chemically contaminated excavated soils were removed for disposal. After remediation, the sites met standards for unrestricted use. These sites were two of the first three Air Force radioactive disposal sites to be closed and were the first to be closed under Draft NUREG/CR-5512

  6. A large-stroke compliant joint–based force/displacement integrated sensor

    Directory of Open Access Journals (Sweden)

    Xuechao Duan

    2015-12-01

    Full Text Available The design methodology and validation of a compliant translational joint–based force/displacement integrated sensor is presented in this article. The stiffness analysis of the large displacement high precision compliant translational joint is developed, in which the screw theory–based symbolic formulation method for structures is employed. By combining the stiffness matrix of the single compliant beams and components in this joint, the entire stiffness matrix is derived. The stiffness matrix is validated by finite element analysis (FEA method. Finally, the compliant translational joint was fabricated with a three-dimensional printer and equipped with a linear position sensor and microcontroller. The displacement of the translational joint is measured and then the force is calculated using the stiffness matrix. A calibration is conducted so that the sub-Newton precision of the sensor is achieved.

  7. Performance Improvement of Implicit Integral Robot Force Control through Constraint Based Optimization

    Science.gov (United States)

    2016-12-01

    2011, pp. 1085–1090. [4] A. D. Prete, N. Mansard , F. Nori, G. Metta, and L. Natale, “Partial force control of constrained floating-base robots,” in...Jan 2014. [6] H. Ferreau, A. Potschka, and C. Kirches, “qpOASES webpage,” http://www.qpOASES.org/, 2007–2015. [7] A. Escande, N. Mansard , and P.-B

  8. Solid-state nuclear-spin quantum computer based on magnetic resonance force microscopy

    International Nuclear Information System (INIS)

    Berman, G. P.; Doolen, G. D.; Hammel, P. C.; Tsifrinovich, V. I.

    2000-01-01

    We propose a nuclear-spin quantum computer based on magnetic resonance force microscopy (MRFM). It is shown that an MRFM single-electron spin measurement provides three essential requirements for quantum computation in solids: (a) preparation of the ground state, (b) one- and two-qubit quantum logic gates, and (c) a measurement of the final state. The proposed quantum computer can operate at temperatures up to 1 K. (c) 2000 The American Physical Society

  9. Environmental Assessment for Installation of a New Jet Engine Test Cell, Edwards Air Force Base, California

    Science.gov (United States)

    2012-09-01

    Acetal· Ethyle- Formal- Naph- Ethyle- Formal- Tested Power Setting h’"~ lbslhr’ dehyde Acrolein Ben~ene ben~ene dehyde thalene Scyrene Tolueue Xylenes...TIM Fuel Flow Engine!i per setting, .. I, Acetal- Ethyle- Formal- Naph- Ethyle- Formal- Tested Power Settin hours lb lhrl. dehyde Acrolein Benzene...ENVIRONMENTAL ASSESSMENT FOR INSTALLATION OF A NEW JET ENGINE TEST CELL EDWARDS AIR FORCE BASE, CALIFORNIA September

  10. Final A Street Pond Expansion Environmental Assessment at Beale Air Force Base, California

    Science.gov (United States)

    2008-09-01

    EUCALYPTUS STANDS OTHER SEASONAL WETLAND PERMANENT MARSH RIPARIAN WETLANDS SEASONAL SWALE VERNAL POOL 0 1 20.5 Miles Figure 3-1 Habitat Communities Beale Air...Part B permit. Contaminated soil was identified and removed from the site. Soil vapor extraction and bioventing systems were installed within this...daytime 40 Quiet urban night time 30 Quiet rural night time 20 Rustling leaves 10 Mosquito at 3 feet Beale Air Force Base Final A Street Pond

  11. Exploration and Resource Assessment at Mountain Home Air Force Base, Idaho Using an Integrated Team Approach

    Energy Technology Data Exchange (ETDEWEB)

    Joseph C. Armstrong; Robert P. Breckenridge; Dennis L. Nielson; John W. Shervais; Thomas R. Wood

    2012-10-01

    The U.S. Air Force is facing a number of challenges as it moves into the future, one of the biggest being how to provide safe and secure energy to support base operations. A team of scientists and engineers met at Mountain Home Air Force Base near Boise, Idaho, to discuss the possibility of exploring for geothermal resources under the base. The team identified that there was a reasonable potential for geothermal resources based on data from an existing well. In addition, a regional gravity map helped identify several possible locations for drilling a new well. The team identified several possible sources of funding for this well—the most logical being to use U.S. Department of Energy funds to drill the upper half of the well and U.S. Air Force funds to drill the bottom half of the well. The well was designed as a slimhole well in accordance with State of Idaho Department of Water Resources rules and regulations. Drilling operations commenced at the Mountain Home site in July of 2011 and were completed in January of 2012. Temperatures increased gradually, especially below a depth of 2000 ft. Temperatures increased more rapidly below a depth of 5500 ft. The bottom of the well is at 5976 ft, where a temperature of about 140°C was recorded. The well flowed artesian from a depth below 5600 ft, until it was plugged off with drilling mud. Core samples were collected from the well and are being analyzed to help understand permeability at depth. Additional tests using a televiewer system will be run to evaluate orientation and directions at fractures, especially in the production zone. A final report on the well exploitation will be forthcoming later this year. The Air Force will use it to evaluate the geothermal resource potential for future private development options at Mountain Home AFB.

  12. Environmental Assessment (EA): Proposed Dormitories and Dining Hall, Hill Air Force Base, Utah

    Science.gov (United States)

    2009-07-09

    Administrative Code UPDES Utah Pollutant Discharge Elimination System USAF United States Air Force USC United States Code VOC Volatile Organic Compound...Pollutant Discharge Elimination System ( UPDES ) General Permit for Discharges from Small Municipal Separate Storm Sewer Systems (MS4s), permit number...based paint (confirmed to contain lead by on-site inspections using a portable X -ray fluorescence analyzer) would be scraped, collected, and properly

  13. Environmental Assessment:Security and Safety Upgrades to Entry Control Facilities Vandenberg Air Force Base, California

    Science.gov (United States)

    2009-07-08

    of Vandenberg Air Force Base, Lompoc, California 2004- 2005 Draft. 106pp. Preston, W. 1996. Serpent in Eden: Dispersal of Foreign Diseases into Pre...quarterly. (35)2&3. Preston, William 1996 Serpent in Eden: Dispersal of Foreign Diseases into Pre-Mission California. Journal of California and Great...RECORDS AND INTELLIGENCE , AND ITS EFFECT ON NATIONAL REGISTER-ELIGIBLE PROPERTIES AT VAFB While the system to declassify national security

  14. Polarizable Empirical Force Field for Halogen-Containing Compounds Based on the Classical Drude Oscillator.

    Science.gov (United States)

    Lin, Fang-Yu; MacKerell, Alexander D

    2018-02-13

    The quality of the force field is crucial to ensure the accuracy of simulations used in molecular modeling, including computer-aided drug design (CADD). To perform more accurate modeling and simulations of halogenated molecules, in this study the polarizable force field based on the classical Drude oscillator model was extended to both aliphatic and aromatic systems using halogenated ethane and benzene model compounds for the halogens F, Cl, Br, and I. The force field parameters were optimized targeting quantum mechanical dipole moments, water interactions, and molecular polarizabilities as well as experimental observables, including enthalpies of vaporization, molecular volumes, hydration free energies, and dielectric constants. The developed halogenated polarizable force field is capable of reproducing QM relative energies and geometries of both halogen bonds and halogen-hydrogen bond donor interactions at an unprecedented level due to the inclusion of a virtual particle and anisotropic atomic polarizability on the halogen and, notably, the inclusion of Lennard-Jones parameters on the halogen Drude particle. The model was validated on the basis of its ability to accurately reproduce pure solvent properties for halogenated naphthalenes and alkanes, including species analogous to those used as refrigerants. Accordingly, it is anticipated that the model will be applicable for the study of halogenated derivatives in CADD as well as in other chemical and biophysical studies.

  15. Interfragmentary Compression Forces Vary Based on Scaphoid Bone Screw Type and Fracture Location.

    Science.gov (United States)

    Patel, Samik; Tiedeken, Nathan; Qvick, Lars; Debski, Richard E; Kaufmann, Robert; Fowler, John R

    2017-12-01

    The objective of this study was to determine the interfragmentary compression forces generated in a foam model as a function of headless compression screw type (fully threaded and central threadless) and fracture location. Eighty-eight polyurethane foam models were fixed across a simulated transverse fracture with either a fully threaded screw or a central threadless screw. The location of the transverse fracture varied along the length of the foam model in 2 mm increments for 11 fracture locations. The force generated at the fracture site upon fixation was utilized to determine the interfragmentary compression. Interfragmentary compression was compared using a paired t test and 2-way analysis of variance, with significance set at P compression was found to vary based on fracture location and screw type. The fully threaded screw generated significantly greater compression for fracture locations at 12 mm and 18 mm from the top edge of the foam model, while the central threadless screw generated significantly greater compression for fractures located 2 mm from the top edge of the foam model. The central threadless screw and the fully threaded screw had different fracture locations where maximum compression force occurred. The fully threaded screw generated greater compression force toward the screw center due to greater thread purchase. However, the central threadless screw generated greater compression at the most proximal fracture location due to its greater thread pitch toward the screw head. Maximizing interfragmentary compression may aid in reducing nonunion rates associated with the internal fixation of proximal scaphoid fractures.

  16. Novel Door-opening Method for Six-legged Robots Based on Only Force Sensing

    Science.gov (United States)

    Chen, Zhi-Jun; Gao, Feng; Pan, Yang

    2017-09-01

    Current door-opening methods are mainly developed on tracked, wheeled and biped robots by applying multi-DOF manipulators and vision systems. However, door-opening methods for six-legged robots are seldom studied, especially using 0-DOF tools to operate and only force sensing to detect. A novel door-opening method for six-legged robots is developed and implemented to the six-parallel-legged robot. The kinematic model of the six-parallel-legged robot is established and the model of measuring the positional relationship between the robot and the door is proposed. The measurement model is completely based on only force sensing. The real-time trajectory planning method and the control strategy are designed. The trajectory planning method allows the maximum angle between the sagittal axis of the robot body and the normal line of the door plane to be 45º. A 0-DOF tool mounted to the robot body is applied to operate. By integrating with the body, the tool has 6 DOFs and enough workspace to operate. The loose grasp achieved by the tool helps release the inner force in the tool. Experiments are carried out to validate the method. The results show that the method is effective and robust in opening doors wider than 1 m. This paper proposes a novel door-opening method for six-legged robots, which notably uses a 0-DOF tool and only force sensing to detect and open the door.

  17. Template model inspired leg force feedback based control can assist human walking.

    Science.gov (United States)

    Zhao, Guoping; Sharbafi, Maziar; Vlutters, Mark; van Asseldonk, Edwin; Seyfarth, Andre

    2017-07-01

    We present a novel control approach for assistive lower-extremity exoskeletons. In particular, we implement a virtual pivot point (VPP) template model inspired leg force feedback based controller on a lower-extremity powered exoskeleton (LOPES II) and demonstrate that it can effectively assist humans during walking. It has been shown that the VPP template model is capable of stabilizing the trunk and reproduce a human-like hip torque during the stance phase of walking. With leg force and joint angle feedback inspired by the VPP template model, our controller provides hip and knee torque assistance during the stance phase. A pilot experiment was conducted with four healthy subjects. Joint kinematics, leg muscle electromyography (EMG), and metabolic cost were measured during walking with and without assistance. Results show that, for 0.6 m/s walking, our controller can reduce leg muscle activations, especially for the medial gastrocnemius (about 16.0%), while hip and knee joint kinematics remain similar to the condition without the controller. Besides, the controller also reduces 10% of the net metabolic cost during walking. This paper demonstrates walking assistance benefits of the VPP template model for the first time. The support of human walking is achieved by a force feedback of leg force applied to the control of hip and knee joints. It can help us to provide a framework for investigating walking assistance control in the future.

  18. Integral force feedback control with input shaping: Application to piezo-based scanning systems in ECDLs

    Science.gov (United States)

    Zhang, Meng; Liu, Zhigang; Zhu, Yu; Bu, Mingfan; Hong, Jun

    2017-07-01

    In this paper, a hybrid control system is developed by integrating the closed-loop force feedback and input shaping method to overcome the problem of the hysteresis and dynamic behavior in piezo-based scanning systems and increase the scanning speed of tunable external cavity diode lasers. The flexible hinge and piezoelectric actuators are analyzed, and a dynamic model of the scanning systems is established. A force sensor and an integral controller are utilized in integral force feedback (IFF) to directly augment the damping of the piezoelectric scanning systems. Hysteresis has been effectively eliminated, but the mechanical resonance is still evident. Noticeable residual vibration occurred after the inflection points and then gradually disappeared. For the further control of mechanical resonance, based on the theory of minimum-acceleration trajectory planning, the time-domain input shaping method was developed. The turning sections of a scanning trajectory are replaced by smooth curves, while the linear sections are retained. The IFF method is combined with the input shaping method to control the non-linearity and mechanical resonance in high-speed piezo-based scanning systems. Experiments are conducted, and the results demonstrate the effectiveness of the proposed control approach.

  19. The simulation of the half-dry stroke based on the force feedback technology

    Science.gov (United States)

    Guo, Chao; Hou, Zeng-xuan; Zheng, Shuan-zhu; Yang, Guang-qing

    2017-02-01

    A novel stroke simulation method of the Half-dry style of Chinese calligraphy based on the force feedback technology is proposed for the virtual painting. Firstly, according to the deformation of the brush when the force is exerted on it, the brush footprint between the brush and paper is calculated. The complete brush stroke is obtained by superimposing brush footprints along the painting direction, and the dynamic painting of the brush stroke is implemented. Then, we establish the half-dry texture databases and propose the concept of half-dry value by researching the main factors that affect the effects of the half-dry stroke. In the virtual painting, the half-dry texture is mapped into the stroke in real time according to the half-dry value and painting technique. A technique of texture blending based on the KM model is applied to avoid the seams while texture mapping. The proposed method has been successfully applied to the virtual painting system based on the force feedback technology. In this system, users can implement the painting in real time with a Phantom Desktop haptic device, which can effectively enhance reality to users.

  20. The 'Arm Force Field' method to predict manual arm strength based on only hand location and force direction.

    Science.gov (United States)

    La Delfa, Nicholas J; Potvin, Jim R

    2017-03-01

    This paper describes the development of a novel method (termed the 'Arm Force Field' or 'AFF') to predict manual arm strength (MAS) for a wide range of body orientations, hand locations and any force direction. This method used an artificial neural network (ANN) to predict the effects of hand location and force direction on MAS, and included a method to estimate the contribution of the arm's weight to the predicted strength. The AFF method predicted the MAS values very well (r 2  = 0.97, RMSD = 5.2 N, n = 456) and maintained good generalizability with external test data (r 2  = 0.842, RMSD = 13.1 N, n = 80). The AFF can be readily integrated within any DHM ergonomics software, and appears to be a more robust, reliable and valid method of estimating the strength capabilities of the arm, when compared to current approaches. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. Florida's Mandated Educational Leadership Program Redesign: The William Cecil Golden Touch

    Science.gov (United States)

    Mountford, Meredith; Acker-Hocevar, Michele A.

    2013-01-01

    In 2007, educational leadership programs in Florida were notified by Florida's Department of Education of a law requiring all programs to align with new legislation, State Rule 6A-5.081. Previously, most state-approved preparation programs were based on Florida's Leadership Preparation Standards, a version of the 1996 Interstate School Leadership…

  2. Measurement correction method for force sensor used in dynamic pressure calibration based on artificial neural network optimized by genetic algorithm

    Science.gov (United States)

    Gu, Tingwei; Kong, Deren; Shang, Fei; Chen, Jing

    2017-12-01

    We present an optimization algorithm to obtain low-uncertainty dynamic pressure measurements from a force-transducer-based device. In this paper, the advantages and disadvantages of the methods that are commonly used to measure the propellant powder gas pressure, the applicable scope of dynamic pressure calibration devices, and the shortcomings of the traditional comparison calibration method based on the drop-weight device are firstly analysed in detail. Then, a dynamic calibration method for measuring pressure using a force sensor based on a drop-weight device is introduced. This method can effectively save time when many pressure sensors are calibrated simultaneously and extend the life of expensive reference sensors. However, the force sensor is installed between the drop-weight and the hammerhead by transition pieces through the connection mode of bolt fastening, which causes adverse effects such as additional pretightening and inertia forces. To solve these effects, the influence mechanisms of the pretightening force, the inertia force and other influence factors on the force measurement are theoretically analysed. Then a measurement correction method for the force measurement is proposed based on an artificial neural network optimized by a genetic algorithm. The training and testing data sets are obtained from calibration tests, and the selection criteria for the key parameters of the correction model is discussed. The evaluation results for the test data show that the correction model can effectively improve the force measurement accuracy of the force sensor. Compared with the traditional high-accuracy comparison calibration method, the percentage difference of the impact-force-based measurement is less than 0.6% and the relative uncertainty of the corrected force value is 1.95%, which can meet the requirements of engineering applications.

  3. Examination of biogenic selenium-containing nanosystems based on polyelectrolyte complexes by atomic force, Kelvin probe force and electron microscopy methods

    Energy Technology Data Exchange (ETDEWEB)

    Sukhanova, T. E., E-mail: tat-sukhanova@mail.ru; Vylegzhanina, M. E.; Valueva, S. V.; Volkov, A. Ya.; Kutin, A. A. [Institute of Macromolecular Compounds RAS, 199004 Bolshoy Pr., 31, St.-Petersburg (Russian Federation); Temiryazeva, M. P.; Temiryazev, A. G. [Kotel’nikov Institute of Radio Engineering and Electronics (Fryazino Branch) Russian Academy of Sciences, Fryazino, Moscow region, 141190 (Russian Federation)

    2016-06-17

    The morphology and electrical properties of biogenic selenium-containing nanosystems based on polyelectrolyte complexes (PECs) were examined using AFM, Kelvin Probe Force and electron microscopy methods. It has been found, that prepared nanostructures significantly differed in their morphological types and parameters. In particular, multilayers capsules can be produced via varying synthesis conditions, especially, the selenium–PEC mass ratio ν. At the “special point” (ν = 0.1), filled and hollow nano- and microcapsules are formed in the system. The multilayer character of the capsules walls is visible in the phase images. Kelvin Probe Force images showed the inhomogeneity of potential distribution in capsules and outside them.

  4. Final Environmental Assessment for Construction of Fisher House II, Wright-Patterson Air Force Base, Ohio

    Science.gov (United States)

    2008-03-25

    Impacts would be minimized by implementing erosion and siltation controls. Cultura l Resources (EA Section IV.F.): The proposed action is located...annual payroll of approximately $1.25 billion, making the base a major social and economic force in the Dayton area. The base’s economic impact...8154 8156 8173 8172 8157 8158 8150 8149 8151 8174 8175 8176 8 81 82 8206 8205 8207 8171 8170 8169 8 PLUM LA N E WOOD DR IV E CRABAPPLE RI VE DRIVE LANE

  5. (Environmental investigation of ground water contamination at Wright- Patterson Air Force Base, Ohio)

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    This Health and Safety Plan (HSP) was developed for the Environmental Investigation of Ground-water Contamination Investigation at Wright-Patterson Air Force Base near Dayton, Ohio, based on the projected scope of work for the Phase 1, Task 4 Field Investigation. The HSP describes hazards that may be encountered during the investigation, assesses the hazards, and indicates what type of personal protective equipment is to be used for each task performed. The HSP also addresses the medical monitoring program, decontamination procedures, air monitoring, training, site control, accident prevention, and emergency response.

  6. Preliminarily measurement and analysis of sawing forces in fresh cadaver mandible using reciprocating saw for reality-based haptic feedback.

    Science.gov (United States)

    Yua, Dedong; Zhengb, Xiaohu; Chenc, Ming; Shend, Steve G F

    2012-05-01

    The aim of the study was to preliminarily measure and analyze the cutting forces in fresh Chinese cadaver mandible using a clinically widely used reciprocating saw for reality-based haptic feedback. Eight mandibles were taken from fresh Chinese cadavers, 4 females and 4 males, aged between 59 and 95 years. A set of sawing experiments, using a surgery Stryker micro-reciprocating saw and Kistler piezoelectric dynamometer, was carried out by a CNC machining center. Under different vibration frequencies of saw and feeding rates measured from orthognathic surgery, sawing forces were recorded by a signal acquisition system. Remarkably different sawing forces were measured from different cadavers. Feed and vibration frequency of the reciprocating saw could determine the cutting forces only on 1 body. To reduce the impact of bone thickness changes on the cutting force measurements, all the cutting force data should be converted to the force of unit cutting length. The vibration frequency of haptic feedback system is determined by main cutting forces. Fast Fourier transform method can be used to calculate the frequency of this system. To simulate surgery in higher fidelity, all the sawing forces from the experiment should be amended by experienced surgeons before use in virtual reality surgery simulator. Sawing force signals of different ages for force feedback were measured successfully, and more factors related to the bone mechanical properties, such as bone density, should be concerned in the future.

  7. Orlando, Florida, USA

    Science.gov (United States)

    1991-01-01

    Much of central Florida, including this detailed view of Orlando (28.5N, 81.0W) can be seen in this single photo. Disney World is at the top center of the scene and the crescent shaped Lake Tohopekaliga is near the bottom. The large round lakes are believed to be sinkholes formed during glacial times when ocean levels were several hundred feet lower than the present. Linear patterns east of Orlando are thought to be ancient shoreline ridges.

  8. Installation Restoration Program Records Search for Luke Air Force Base, Arizona.

    Science.gov (United States)

    1982-06-01

    Hatch, Project Manager (M.S. Chemistry , 1972; M.S. Environmental Engineering, 1973) 2. Mr. Ken Cable, Assistant Project Manager (M.E. Civil...Education M.S., Environmental Engineering, University of Florida, 1973 M.S., Analytical Chemistry , University of Florida, 1972 B.S., Chemistry ...Distance to Meare.. Ofaakang motor well isLt Distance to R.esrvalioa LAnd Use/Zafl~nq 33 C Ltical mavicomAt 0 12 0 3C, Wace Quality of 6aarby e400 oft Asmed

  9. High-force NdFeB-based magnetic tweezers device optimized for microrheology experiments.

    Science.gov (United States)

    Lin, Jun; Valentine, Megan T

    2012-05-01

    We present the design, calibration, and testing of a magnetic tweezers device that employs two pairs of permanent neodymium iron boron magnets surrounded by low-carbon steel focusing tips to apply large forces to soft materials for microrheology experiments. Our design enables the application of forces in the range of 1-1800 pN to ∼4.5 μm paramagnetic beads using magnet-bead separations in the range of 0.3-20 mm. This allows the use of standard coverslips and sample geometries. A high speed camera, custom LED-based illumination scheme, and mechanically stabilized measurement platform are employed to enable the measurement of materials with viscoelastic moduli as high as ∼1 kPa.

  10. High-force NdFeB-based magnetic tweezers device optimized for microrheology experiments

    Energy Technology Data Exchange (ETDEWEB)

    Lin Jun [Department of Mechanical Engineering, University of California, Santa Barbara, California 93106 (United States); Biomolecular Science and Engineering Program, University of California, Santa Barbara, California 93106 (United States); Valentine, Megan T. [Department of Mechanical Engineering, University of California, Santa Barbara, California 93106 (United States)

    2012-05-15

    We present the design, calibration, and testing of a magnetic tweezers device that employs two pairs of permanent neodymium iron boron magnets surrounded by low-carbon steel focusing tips to apply large forces to soft materials for microrheology experiments. Our design enables the application of forces in the range of 1-1800 pN to {approx}4.5 {mu}m paramagnetic beads using magnet-bead separations in the range of 0.3-20 mm. This allows the use of standard coverslips and sample geometries. A high speed camera, custom LED-based illumination scheme, and mechanically stabilized measurement platform are employed to enable the measurement of materials with viscoelastic moduli as high as {approx}1 kPa.

  11. Centrifugal Force Based Magnetic Micro-Pump Driven by Rotating Magnetic Fields

    International Nuclear Information System (INIS)

    Kim, S H; Hashi, S; Ishiyama, K

    2011-01-01

    This paper presents a centrifugal force based magnetic micro-pump for the pumping of blood. Most blood pumps are driven by an electrical motor with wired control. To develop a wireless and battery-free blood pump, the proposed pump is controlled by external rotating magnetic fields with a synchronized impeller. Synchronization occurs because the rotor is divided into multi-stage impeller parts and NdFeB permanent magnet. Finally, liquid is discharged by the centrifugal force of multi-stage impeller. The proposed pump length is 30 mm long and 19 mm in diameter which much smaller than currently pumps; however, its pumping ability satisfies the requirement for a blood pump. The maximum pressure is 120 mmHg and the maximum flow rate is 5000ml/min at 100 Hz. The advantage of the proposed pump is that the general mechanical problems of a normal blood pump are eliminated by the proposed driving mechanism.

  12. Centrifugal Force Based Magnetic Micro-Pump Driven by Rotating Magnetic Fields

    Science.gov (United States)

    Kim, S. H.; Hashi, S.; Ishiyama, K.

    2011-01-01

    This paper presents a centrifugal force based magnetic micro-pump for the pumping of blood. Most blood pumps are driven by an electrical motor with wired control. To develop a wireless and battery-free blood pump, the proposed pump is controlled by external rotating magnetic fields with a synchronized impeller. Synchronization occurs because the rotor is divided into multi-stage impeller parts and NdFeB permanent magnet. Finally, liquid is discharged by the centrifugal force of multi-stage impeller. The proposed pump length is 30 mm long and19 mm in diameter which much smaller than currently pumps; however, its pumping ability satisfies the requirement for a blood pump. The maximum pressure is 120 mmHg and the maximum flow rate is 5000ml/min at 100 Hz. The advantage of the proposed pump is that the general mechanical problems of a normal blood pump are eliminated by the proposed driving mechanism.

  13. Radar Scan Strategies for the Patrick Air Force Base Weather Surveillance Radar, Model-74C, Replacement

    Science.gov (United States)

    Short, David

    2008-01-01

    The 45th Weather Squadron (45 WS) is replacing the Weather Surveillance Radar, Model 74C (WSR-74C) at Patrick Air Force Base (PAFB), with a Doppler, dual polarization radar, the Radtec 43/250. A new scan strategy is needed for the Radtec 43/250, to provide high vertical resolution data over the Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS) launch pads, while taking advantage of the new radar's advanced capabilities for detecting severe weather phenomena associated with convection within the 45 WS area of responsibility. The Applied Meteorology Unit (AMU) developed several scan strategies customized for the operational needs of the 45 WS. The AMU also developed a plan for evaluating the scan strategies in the period prior to operational acceptance, currently scheduled for November 2008.

  14. Passive microrheology of soft materials with atomic force microscopy: A wavelet-based spectral analysis

    Energy Technology Data Exchange (ETDEWEB)

    Martinez-Torres, C.; Streppa, L. [CNRS, UMR5672, Laboratoire de Physique, Ecole Normale Supérieure de Lyon, 46 Allée d' Italie, Université de Lyon, 69007 Lyon (France); Arneodo, A.; Argoul, F. [CNRS, UMR5672, Laboratoire de Physique, Ecole Normale Supérieure de Lyon, 46 Allée d' Italie, Université de Lyon, 69007 Lyon (France); CNRS, UMR5798, Laboratoire Ondes et Matière d' Aquitaine, Université de Bordeaux, 351 Cours de la Libération, 33405 Talence (France); Argoul, P. [Université Paris-Est, Ecole des Ponts ParisTech, SDOA, MAST, IFSTTAR, 14-20 Bd Newton, Cité Descartes, 77420 Champs sur Marne (France)

    2016-01-18

    Compared to active microrheology where a known force or modulation is periodically imposed to a soft material, passive microrheology relies on the spectral analysis of the spontaneous motion of tracers inherent or external to the material. Passive microrheology studies of soft or living materials with atomic force microscopy (AFM) cantilever tips are rather rare because, in the spectral densities, the rheological response of the materials is hardly distinguishable from other sources of random or periodic perturbations. To circumvent this difficulty, we propose here a wavelet-based decomposition of AFM cantilever tip fluctuations and we show that when applying this multi-scale method to soft polymer layers and to living myoblasts, the structural damping exponents of these soft materials can be retrieved.

  15. Relationship between cloud radiative forcing, cloud fraction and cloud albedo, and new surface-based approach for determining cloud albedo

    OpenAIRE

    Y. Liu; W. Wu; M. P. Jensen; T. Toto

    2011-01-01

    This paper focuses on three interconnected topics: (1) quantitative relationship between surface shortwave cloud radiative forcing, cloud fraction, and cloud albedo; (2) surfaced-based approach for measuring cloud albedo; (3) multiscale (diurnal, annual and inter-annual) variations and covariations of surface shortwave cloud radiative forcing, cloud fraction, and cloud albedo. An analytical expression is first derived to quantify the relationship between cloud radiative forcing, cloud fractio...

  16. THE DIAGNOSTICS OF INDUCTION MOTORS ROTOR BAR BREAKS BASED ON THE ANALYSIS OF ELECTROMOTIVE FORCE IN THE STATOR WINDINGS

    Directory of Open Access Journals (Sweden)

    M.V. Zagirnyak

    2014-12-01

    Full Text Available A method for diagnostics of the induction motor rotor bar breaks, based on the wavelet-analysis of the electromotive force induced in the stator windings in the rundown mode is developed. A method for decomposition of the electromotive force of the stator winding phase to the electromotive force signals of the active sides of winding coils using Z-transformation theory is developed. The effectiveness of the proposed diagnostic method was experimentally confirmed.

  17. Relationship between cloud radiative forcing, cloud fraction and cloud albedo, and new surface-based approach for determining cloud albedo

    OpenAIRE

    Y. Liu; W. Wu; M. P. Jensen; T. Toto

    2011-01-01

    This paper focuses on three interconnected topics: (1) quantitative relationship between surface shortwave cloud radiative forcing, cloud fraction, and cloud albedo; (2) surface-based approach for measuring cloud albedo; (3) multiscale (diurnal, annual and inter-annual) variations and covariations of surface shortwave cloud radiative forcing, cloud fraction, and cloud albedo. An analytical expression is first derived to quantify the relationship between cloud radiative forcing, cloud fraction...

  18. Hydrogen Research at Florida Universities

    Science.gov (United States)

    Block, David L.; T-Raissi, Ali

    2009-01-01

    This final report describes the R&D activities and projects conducted for NASA under the 6-year NASA Hydrogen Research at Florida Universities grant program. Contained within this report are summaries of the overall activities, one-page description of all the reports funded under this program and all of the individual reports from each of the 29 projects supported by the effort. The R&D activities cover hydrogen technologies related to production, cryogenics, sensors, storage, separation processes, fuel cells, resource assessments and education. In the span of 6 years, the NASA Hydrogen Research at Florida Universities program funded a total of 44 individual university projects, and employed more than 100 faculty and over 100 graduate research students in the six participating universities. Researchers involved in this program have filed more than 20 patents in all hydrogen technology areas and put out over 220 technical publications in the last 2 years alone. This 6 year hydrogen research program was conducted by a consortium of six Florida universities: Florida International University (FIU) in Miami, Florida State University (FSU) and Florida A&M University (FAMU) in Tallahassee, University of Central Florida (UCF) in Orlando, University of South Florida (USF) in Tampa, and University of Florida (UF) in Gainesville. The Florida Solar Energy Center (FSEC) of the University of Central Florida managed the research activities of all consortium member universities except those at the University of Florida. This report does not include any of the programs or activities conducted at the University of Florida, but can be found in NASA/CR-2008-215440-PART 1-3.

  19. Annular force based variable curvature mirror aiming to realize non-moving element optical zooming

    Science.gov (United States)

    Zhao, Hui; Xie, Xiaopeng; Wei, Jingxuan; Ren, Guorui; Pang, Zhihai; Xu, Liang

    2015-10-01

    Recently, a new kind of optical zooming technique in which no moving elements are involved has been paid much attention. The elimination of moving elements makes optical zooming suitable for applications which has exacting requirements in space, power cost and system stability. The mobile phone and the space-borne camera are two typical examples. The key to realize non-moving elements optical zooming lies in the introduction of variable curvature mirror (VCM) whose radius of curvature could be changed dynamically. When VCM is about to be used to implement optical zoom imaging, two characteristics should be ensured. First, VCM has to provide large enough saggitus variation in order to obtain a big magnification ratio. Second, after the radius of curvature has been changed, the corresponding surface figure accuracy should still be maintained superior to a threshold level to make the high quality imaging possible. In this manuscript, based on the elasticity theory, the physical model of the annular force based variable curvature mirror is established and numerically analyzed. The results demonstrate that when the annular force is applied at the half-the-aperture position, the actuation force is reduced and a smaller actuation force is required to generate the saggitus variation and thus the maintenance of surface figure accuracy becomes easier during the variation of radius of curvature. Besides that, a prototype VCM, whose diameter and thickness are 100mm and 3mm respectively, have been fabricated and the maximum saggitus variation that could be obtained approaches more than 30 wavelengths. At the same time, the degradation of surface figure accuracy is weakly correlated to the curvature radius variation. Keywords: optical zooming; variable curvature mirror; surface figure accuracy; saggitus;

  20. Armed Forces Recreation Center-Orlando

    National Research Council Canada - National Science Library

    Young, Shelton

    1995-01-01

    The U.S. Army Community and Family Support Center manages the morale, welfare, and recreation program for the Army, and established the Armed Forces Recreation Center in Orlando, Florida (AFRC-Orlando...

  1. Nellis and Creech Air Force Bases Capital Improvements Program Environmental Assessment

    Science.gov (United States)

    2008-09-01

    57th Wing, other Air Force units, Navy, Marine Corps and allied air forces. Creech AFB is also the primary training site for the United States Air...Forces, Air National Guard, U.S. Air Force Reserve, Army, Navy, Marine Corps, and allied air forces. They are led by a Blue Forces commander who...includes desert iguana (Dipsosaurus dorsalis), zebra-tailed lizard (Callosaurus draconoides), side-blotched lizard, horned lizards (Phrynosoma spp

  2. Differences in Student Information and Communication Technology Literacy Based on Socio-Economic Status, Ethnicity, and Gender: Evidence of a Digital Divide in Florida Schools

    Science.gov (United States)

    Ritzhaupt, Albert D.; Liu, Feng; Dawson, Kara; Barron, Ann E.

    2013-01-01

    This research examines student information and communication technology (ICT) literacy and its relationships to a student's socio-economic status (SES), gender, and ethnicity of middle school students. We recruited 5,990 students from 13 school districts across the state of Florida. Student participants completed the Student Tool for Technology…

  3. SOUTH FLORIDA ECOSYSTEM RESTORATION: Substantial Progress Made in Developing a Strategic Plan, but Actions Still Needed

    National Research Council Canada - National Science Library

    2001-01-01

    ... entities, as well as public and private interests. In response to growing signs of the ecosystem's deterioration, federal agencies established the South Florida Ecosystem Restoration Task Force in 1993 to coordinate ongoing federal activities...

  4. Fall 1994 wildlife and vegetation survey, Norton Air Force Base, California

    Energy Technology Data Exchange (ETDEWEB)

    1994-12-15

    The fall 1994 wildlife and vegetation surveys were completed October 3-7, 1994, at Norton Air Force Base (AFB), California. Two biologists from CDM Federal Programs, the U.S. Environmental Protection Agency (EPA) regional biologist and the Oak Ridge National Laboratory (ORNL) lead biologist conducted the surveys. A habitat assessment of three Installation Restoration Project (IRP) sites at Norton Air Force Base was also completed during the fall survey period. The IRP sites include: Landfill No. 2 (Site 2); the Industrial Wastewater Treatment Plant (IWTP) area; and Former Fire Training Area No. 1 (Site 5). The assessments were designed to qualitatively characterize the sites of concern, identify potential ecological receptors, and provide information for Remedial Design/Remedial Action activities. A Reference Area (Santa Ana River Wash) and the base urban areas were also characterized. The reference area assessment was performed to provide a baseline for comparison with the IRP site habitats. The fall 1994 survey is the second of up to four surveys that may be completed. In order to develop a complete understanding of all plant and animal species using the base, these surveys were planned to be conducted over four seasons. Species composition can vary widely during the course of a year in Southern California, and therefore, seasonal surveys will provide the most complete and reliable data to address changes in habitat structure and wildlife use of the site. Subsequent surveys will focus on seasonal wildlife observations and a spring vegetation survey.

  5. The Development of a Scientific Evaluation System of Force-on-Force (FOF) Exercise for Performance-based Regulation in Nuclear Security

    International Nuclear Information System (INIS)

    Koh, Moonsung; Jung, Myungtak

    2015-01-01

    A terrorist attack or sabotage at a nuclear facility could lead result in a great amount of loss of life and social chaos, in addition to serious radiological damage. As threats have been evolved more intelligent, divergent, advanced, the international societies including IAEA encourage for all member states to establish the performance-based regulation using Forceon- Force (FOF) exercise, computer simulation. Consequently, the performance evaluation for physical protection at nuclear facilities should focus on properly reacting to threat scenarios. Physical protection should also include detecting, blocking, delaying, interrupting including the human and technical factors the adversary having malicious intention of the realistic main threat element before he accomplishes the goal based on Design Basis Threat (DBT). After the completion of the FOF evaluation system, KINAC will evaluate, and later strengthen its overall security program in response to changes in the threat environment, technological advancements, and lessons learned. As a result, substantial improvements to a nuclear facility security can be predicted. These improvements will focus on a plant security force, physical barriers, intrusion detection systems, surveillance systems, and access controls. Through the building a Force-on-Force scientific evaluation system, KINAC will establish an efficient physical protection implementation system for nuclear energy facilities

  6. A Polymer-Based Capacitive Sensing Array for Normal and Shear Force Measurement

    Science.gov (United States)

    Cheng, Ming-Yuan; Lin, Chun-Liang; Lai, Yu-Tse; Yang, Yao-Joe

    2010-01-01

    In this work, we present the development of a polymer-based capacitive sensing array. The proposed device is capable of measuring normal and shear forces, and can be easily realized by using micromachining techniques and flexible printed circuit board (FPCB) technologies. The sensing array consists of a polydimethlysiloxane (PDMS) structure and a FPCB. Each shear sensing element comprises four capacitive sensing cells arranged in a 2 × 2 array, and each capacitive sensing cell has two sensing electrodes and a common floating electrode. The sensing electrodes as well as the metal interconnect for signal scanning are implemented on the FPCB, while the floating electrodes are patterned on the PDMS structure. This design can effectively reduce the complexity of the capacitive structures, and thus makes the device highly manufacturable. The characteristics of the devices with different dimensions were measured and discussed. A scanning circuit was also designed and implemented. The measured maximum sensitivity is 1.67%/mN. The minimum resolvable force is 26 mN measured by the scanning circuit. The capacitance distributions induced by normal and shear forces were also successfully captured by the sensing array. PMID:22163466

  7. A Polymer-Based Capacitive Sensing Array for Normal and Shear Force Measurement

    Directory of Open Access Journals (Sweden)

    Ming-Yuan Cheng

    2010-11-01

    Full Text Available In this work, we present the development of a polymer-based capacitive sensing array. The proposed device is capable of measuring normal and shear forces, and can be easily realized by using micromachining techniques and flexible printed circuit board (FPCB technologies. The sensing array consists of a polydimethlysiloxane (PDMS structure and a FPCB. Each shear sensing element comprises four capacitive sensing cells arranged in a 2 × 2 array, and each capacitive sensing cell has two sensing electrodes and a common floating electrode. The sensing electrodes as well as the metal interconnect for signal scanning are implemented on the FPCB, while the floating electrodes are patterned on the PDMS structure. This design can effectively reduce the complexity of the capacitive structures, and thus makes the device highly manufacturable. The characteristics of the devices with different dimensions were measured and discussed. A scanning circuit was also designed and implemented. The measured maximum sensitivity is 1.67%/mN. The minimum resolvable force is 26 mN measured by the scanning circuit. The capacitance distributions induced by normal and shear forces were also successfully captured by the sensing array.

  8. Seismic control performance for Pounding Tuned Massed Damper based on viscoelastic pounding force analytical method

    Science.gov (United States)

    Xue, Qichao; Zhang, Jingcai; He, Jian; Zhang, Chunwei; Zou, Guangping

    2017-12-01

    This paper focuses on vibration control performance of Pounding Tuned Massed Damper (PTMD) with viscoelastic pounding layers, which can dissipate energy during collision process. By using of viscoelastic pounding force analytical method, two types of pounding force models for different contact geometries are developed to illustrate interactions among pounding components in PTMD. A shake table test based on a simplified experimental structure is conducted to verify the effectiveness of single PTMD as well as the viscoelastic pounding force model. Furthermore, a parametric study for a 14-storeys steel structure is presented to investigate the performance of PTMD device in multiple degree of freedom (MDOF) system. Results from numerical simulations demonstrated that properties of viscoelastic material and gaps between mass block and the limiters in PTMD are key factors for vibration control performance. By inputting a series of seismic excitations into MDOF system, comparisons between PTMD and traditional TMD reveals that the optimized PTMD has better performance than the traditional TMD in vibration suppression in certain cases.

  9. Model-Based Heterogeneous Data Fusion for Reliable Force Estimation in Dynamic Structures under Uncertainties.

    Science.gov (United States)

    Khodabandeloo, Babak; Melvin, Dyan; Jo, Hongki

    2017-11-17

    Direct measurements of external forces acting on a structure are infeasible in many cases. The Augmented Kalman Filter (AKF) has several attractive features that can be utilized to solve the inverse problem of identifying applied forces, as it requires the dynamic model and the measured responses of structure at only a few locations. But, the AKF intrinsically suffers from numerical instabilities when accelerations, which are the most common response measurements in structural dynamics, are the only measured responses. Although displacement measurements can be used to overcome the instability issue, the absolute displacement measurements are challenging and expensive for full-scale dynamic structures. In this paper, a reliable model-based data fusion approach to reconstruct dynamic forces applied to structures using heterogeneous structural measurements (i.e., strains and accelerations) in combination with AKF is investigated. The way of incorporating multi-sensor measurements in the AKF is formulated. Then the formulation is implemented and validated through numerical examples considering possible uncertainties in numerical modeling and sensor measurement. A planar truss example was chosen to clearly explain the formulation, while the method and formulation are applicable to other structures as well.

  10. Rehabilitation for hemiplegia using an upper limb training system based on a force direction.

    Science.gov (United States)

    Ogata, Kunihiro; Hirabayashi, Yuto; Kubota, Keisuke; Hasegawa, Yuri; Tsuji, Toshiaki

    2017-07-01

    Hemiplegia patients have complete paralysis of half their body, and encounter many challenges in living an independent life. Rehabilitation of the lower body is more important than that of the upper body for independent living; thus, recovering upper body functions of their paralyzed side is not enough. Rehabilitation robots may be used to assist training without therapists. In this study, a small portable rehabilitation robot was developed for use at home, and a new training method was proposed. This robot consists on an omni wheel mechanism and a force sensor, and is capable of deciding the motion based on the force value. Voluntary movement of a hemiplegia patient is recovered by the rehabilitation robot and proposed training method. Thus, verification experiments were performed using participants with hemiplegia. The CCI (Co-Contraction Index) from after training were smaller than ones of before training, thus the movement skills of the participants improved with respect to controlling force direction and magnitude. Moreover, manual function test (MFT) scores increased as reflected by improvements in the motor function of the upper limb using the proposed training method.

  11. Physics-based modeling of live wildland fuel ignition experiments in the Forced Ignition and Flame Spread Test apparatus

    Science.gov (United States)

    C. Anand; B. Shotorban; S. Mahalingam; S. McAllister; D. R. Weise

    2017-01-01

    A computational study was performed to improve our understanding of the ignition of live fuel in the forced ignition and flame spread test apparatus, a setup where the impact of the heating mode is investigated by subjecting the fuel to forced convection and radiation. An improvement was first made in the physics-based model WFDS where the fuel is treated as fixed...

  12. Environmental Assessment For the Expansion and Relocation of the Explosive Ordnance Disposal Preliminary Course to Sheppard Air Force Base, Texas

    Science.gov (United States)

    2010-11-03

    ADA Americans with Disabilities Act ADSL Average Daily Student Load AETC Air Education Training Command AFB Air Force Base AFI Air Force...capacity (i.e., billeting and dining facilities) to handle the increased average daily student load ( ADSL ) that would result from extension of the course

  13. 2018 Annual Terrestrial Sampling Plan for Sandia National Laboratories/New Mexico on Kirtland Air Force Base.

    Energy Technology Data Exchange (ETDEWEB)

    Griffith, Stacy R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2018-01-01

    The 2018 Annual Terrestrial Sampling Plan for Sandia National Laboratories/New Mexico on Kirtland Air Force Base has been prepared in accordance with the “Letter of Agreement Between Department of Energy, National Nuclear Security Administration, Sandia Field Office (DOE/NNSA/SFO) and 377th Air Base Wing (ABW), Kirtland Air Force Base (KAFB) for Terrestrial Sampling” (signed January 2017), Sandia National Laboratories, New Mexico (SNL/NM). The Letter of Agreement requires submittal of an annual terrestrial sampling plan.

  14. 2017 Annual Terrestrial Sampling Plan for Sandia National Laboratories/New Mexico on Kirtland Air Force Base

    Energy Technology Data Exchange (ETDEWEB)

    Griffith, Stacy R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-02-01

    The 2017 Annual Terrestrial Sampling Plan for Sandia National Laboratories/New Mexico on Kirtland Air Force Base has been prepared in accordance with the “Letter of Agreement Between Department of Energy, National Nuclear Security Administration, Sandia Field Office (DOE/NNSA/SFO) and 377th Air Base Wing (ABW), Kirtland Air Force Base (KAFB) for Terrestrial Sampling” (signed January 2017), Sandia National Laboratories, New Mexico (SNL/NM). The Letter of Agreement requires submittal of an annual terrestrial sampling plan.

  15. Research on micromanipulator’s clamping force sensing based on static wirerope tension of a surgical robot

    Directory of Open Access Journals (Sweden)

    Lingtao Yu

    2015-04-01

    Full Text Available The micromanipulator’s force feedback is one of the key research contents of minimally invasive surgical robotic system. Because the micromanipulator is a kind of compact construction which is suitable for valve installation with small space in surgery, especially for the influence of disinfection method, there are major difficulties and limitations to integrate compact sensors in the end of micromanipulator. This article focuses on the 3-degree-of-freedom micromanipulator’s clamping force sensing, and these three joints are actuated by wirerope driving. A clamping force sensing method is proposed based on static tension of wirerope driving, and a static model between the clamping force and wirerope’s static tension is established considering the influence of real friction resistance in the mechanical system. Finally, an equivalent experimental test platform for 3-degree-of-freedom micromanipulator’s clamping force sensing is set up, and then a series of experiments of the clamping force are studied. The frictional resistances of wirerope between the guide plate and guide pulley mechanism are tested, and a calibration and correction method of the experimental clamping force is proposed. The final experiment results show that the total average accuracy of experimental clamping force is about 78.3%, and it can be the basic measurement force to realize micromanipulator’s clamping force feedback of a minimally invasive surgical robot.

  16. Ecological characterization of the lower Everglades, Florida Bay, and the Florida Keys

    Energy Technology Data Exchange (ETDEWEB)

    Schomer, N.S.; Drew, R.D.

    1982-09-01

    A conceptual model of the study area identifies four major ecological zones: (1) terrestrial and freshwater wetlands, (2) estuarine and saltwater wetlands, (3) Florida Bay and mangrove islands, and (4) the Florida Keys. These zones are delineated by differences in basic physical-chemical background factors which in turn promote characteristic ecological communities. The terrestrial and freshwater wetlands support pinelands, sawgrass marshes, wet prairies, sloughs and occasional tree islands. The estuarine and saltwater wetlands support mangrove forests, salt marshes and oscillating salinity systems. Florida Bay exhibits oscillating meso- to hypersaline waters over grassbeds on marine lime mud sediments surrounding deeper lake areas. The exposed tips of the mud banks frequently support mangrove or salt prairie vegetation. The Florida Keys support almost all of the above communities to some small degree but are characterized by extensive offshore coral reefs. The productivity of these communities with regard to fish and wildlife reflects (1) the diversity and type of habitats available to species that are potentially capable of exploiting them, (2) the degree of alteration of these habitats by man and natural forces, and (3) historical, biogeographic and random factors that restrict organisms to specific environments or prohibit them from exploiting a potential habitat.

  17. The influence of physical and physiological cues on atomic force microscopy-based cell stiffness assessment.

    Directory of Open Access Journals (Sweden)

    Yu-Wei Chiou

    Full Text Available Atomic force microscopy provides a novel technique for differentiating the mechanical properties of various cell types. Cell elasticity is abundantly used to represent the structural strength of cells in different conditions. In this study, we are interested in whether physical or physiological cues affect cell elasticity in Atomic force microscopy (AFM-based assessments. The physical cues include the geometry of the AFM tips, the indenting force and the operating temperature of the AFM. All of these cues show a significant influence on the cell elasticity assessment. Sharp AFM tips create a two-fold increase in the value of the effective Young's modulus (E(eff relative to that of the blunt tips. Higher indenting force at the same loading rate generates higher estimated cell elasticity. Increasing the operation temperature of the AFM leads to decreases in the cell stiffness because the structure of actin filaments becomes disorganized. The physiological cues include the presence of fetal bovine serum or extracellular matrix-coated surfaces, the culture passage number, and the culture density. Both fetal bovine serum and the extracellular matrix are critical for cells to maintain the integrity of actin filaments and consequently exhibit higher elasticity. Unlike primary cells, mouse kidney progenitor cells can be passaged and maintain their morphology and elasticity for a very long period without a senescence phenotype. Finally, cell elasticity increases with increasing culture density only in MDCK epithelial cells. In summary, for researchers who use AFM to assess cell elasticity, our results provide basic and significant information about the suitable selection of physical and physiological cues.

  18. A nanobiosensing method based on force measurement of antibody-antigen interaction for direct detection of enterovirus 71 by the chemically modified atomic force microscopic probe.

    Science.gov (United States)

    Hong, Chung-Hung; Hsieh, Chung-Fan; Tseng, Chi-Shin; Huang, Wei-Chih; Guo, Cheng-Yan; Lin, Shiming; Lee, Si-Chen

    2017-10-01

    Hand, Foot and mouth disease (HFMD) is a common disease with high infectivity for children, and enterovirus 71 (EV71) is one of the main pathogens to cause the type of illness. Therefore, the aim of this study was to propose a rapid and effective technique for detecting EV71 directly based on the mechanism of biological intermolecular force by using atomic force microscopy (AFM). At first, we coated EV71 particles on the mica surface and made the EV71 antibodies (anti-EV71) fixed on the AFM tip by means of several chemical procedures. Then, AFM chemically modified tip was applied to measure the unbinding forces between EV71 and anti-EV71 by contact mode. Finally, by using AFM imaging calculating software, the EV71 particle size (mean±SD) was 31.36±3.87 nm (n = 200) and this result was concordance with previous literature. Besides, the force (mean±SD) between EV71 antigen and antibody complex was 336.9±64.7 pN. The force (mean±SD) between anti-EV71 and non-specific specimens was 47.1±15.1 pN and was significantly smaller (P measuring the force magnitude and observing the occurrence of EV71/anti-EV71 unbinding events. Therefore, the combination of AFM system and the chemically modified tip has the potential to be a rapid and effective method for detecting EV71 directly. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Front Crawl Swimming Performance and Bi-Lateral Force Asymmetry during Land-Based and Tethered Swimming Tests

    Directory of Open Access Journals (Sweden)

    Karini B. dos Santos, Paulo C. Barauce Bento, Gleber Pereira, Carl Payton, André L.F. Rodacki

    2017-12-01

    Full Text Available The aims of this study were to investigate whether land-based and tethered swimming strength tests can explain swimming performance in 200-meter front crawl and, whether these tests were able to identify bilateral symmetry in force production. In the first session, eighteen swimmers completed a maximum effort 200 m front crawl swim (swimming performance and 15 seconds maximal effort tethered front crawl swim. In the second session, participants performed the upper extremity isometric strength test. Peak force production of tethered swimming and isometric strength tests were significantly correlated for the strongest and weakest sides (r = 0.58 and r = 0.63, respectively; p < 0.05, but only peak force production during tethered swimming correlated with 200 m swimming performance time (r = -0.55, p < 0.05. Bilateral asymmetries in peak force and rate of force development were similar between the tethered swimming and isometric strength tests (peak force: 13%, p = 0.24; rate of force development: 15%, p = 0.88 However, both tests detected significant difference of peak force and rate of force development between body sides. The tethered swimming test can partially explain the 200 m front crawl swimming performance. In addition, the land-based and tethered swimming tests may be used to identify bilateral asymmetry of swimming

  20. Front Crawl Swimming Performance and Bi-Lateral Force Asymmetry during Land-Based and Tethered Swimming Tests.

    Science.gov (United States)

    Dos Santos, Karini B; Bento, Paulo C Barauce; Pereira, Gleber; Payton, Carl; Rodacki, André L F

    2017-12-01

    The aims of this study were to investigate whether land-based and tethered swimming strength tests can explain swimming performance in 200-meter front crawl and, whether these tests were able to identify bilateral symmetry in force production. In the first session, eighteen swimmers completed a maximum effort 200 m front crawl swim (swimming performance) and 15 seconds maximal effort tethered front crawl swim. In the second session, participants performed the upper extremity isometric strength test. Peak force production of tethered swimming and isometric strength tests were significantly correlated for the strongest and weakest sides (r = 0.58 and r = 0.63, respectively; p force production during tethered swimming correlated with 200 m swimming performance time (r = -0.55, p force and rate of force development were similar between the tethered swimming and isometric strength tests (peak force: 13%, p = 0.24; rate of force development: 15%, p = 0.88) However, both tests detected significant difference of peak force and rate of force development between body sides. The tethered swimming test can partially explain the 200 m front crawl swimming performance. In addition, the land-based and tethered swimming tests may be used to identify bilateral asymmetry of swimming.

  1. Potentiometric surfaces of the Arnold Engineering Development Complex Area, Arnold Air Force Base, Tennessee, May and September 2011

    Science.gov (United States)

    Haugh, Connor J.; Robinson, John A.

    2016-01-29

    Arnold Air Force Base occupies about 40,000 acres in Coffee and Franklin Counties, Tennessee. The primary mission of Arnold Air Force Base is to provide risk-reduction information in the development of aerospace products through test and evaluation. This mission is achieved in part through test facilities at Arnold Engineering Development Complex (AEDC), which occupies about 4,000 acres in the center of Arnold Air Force Base. Arnold Air Force Base is underlain by gravel and limestone aquifers, the most productive of which is the Manchester aquifer. Several volatile organic compounds, primarily chlorinated solvents, have been identified in the groundwater at Arnold Air Force Base. In 2011, the U.S. Geological Survey, in cooperation with the U.S. Air Force, Arnold Air Force Base, completed a study of groundwater flow focused on the Arnold Engineering Development Complex area. The Arnold Engineering Development Complex area is of particular concern because within this area (1) chlorinated solvents have been identified in the groundwater, (2) the aquifers are dewatered around below-grade test facilities, and (3) there is a regional groundwater divide.

  2. Building an open-source simulation platform of acoustic radiation force-based breast elastography

    Science.gov (United States)

    Wang, Yu; Peng, Bo; Jiang, Jingfeng

    2017-03-01

    Ultrasound-based elastography including strain elastography, acoustic radiation force impulse (ARFI) imaging, point shear wave elastography and supersonic shear imaging (SSI) have been used to differentiate breast tumors among other clinical applications. The objective of this study is to extend a previously published virtual simulation platform built for ultrasound quasi-static breast elastography toward acoustic radiation force-based breast elastography. Consequently, the extended virtual breast elastography simulation platform can be used to validate image pixels with known underlying soft tissue properties (i.e. ‘ground truth’) in complex, heterogeneous media, enhancing confidence in elastographic image interpretations. The proposed virtual breast elastography system inherited four key components from the previously published virtual simulation platform: an ultrasound simulator (Field II), a mesh generator (Tetgen), a finite element solver (FEBio) and a visualization and data processing package (VTK). Using a simple message passing mechanism, functionalities have now been extended to acoustic radiation force-based elastography simulations. Examples involving three different numerical breast models with increasing complexity—one uniform model, one simple inclusion model and one virtual complex breast model derived from magnetic resonance imaging data, were used to demonstrate capabilities of this extended virtual platform. Overall, simulation results were compared with the published results. In the uniform model, the estimated shear wave speed (SWS) values were within 4% compared to the predetermined SWS values. In the simple inclusion and the complex breast models, SWS values of all hard inclusions in soft backgrounds were slightly underestimated, similar to what has been reported. The elastic contrast values and visual observation show that ARFI images have higher spatial resolution, while SSI images can provide higher inclusion-to-background contrast

  3. Silicon Nano fabrication by Atomic Force Microscopy-Based Mechanical Processing

    International Nuclear Information System (INIS)

    Miyake, Sh.; Wang, M.; Kim, J.

    2014-01-01

    This paper reviews silicon nano fabrication processes using atomic force microscopy (AFM). In particular, it summarizes recent results obtained in our research group regarding AFM-based silicon nano fabrication through mechanochemical local oxidation by diamond tip sliding, as well as mechanical, electrical, and electromechanical processing using an electrically conductive diamond tip. Microscopic three-dimensional manufacturing mainly relies on etching, deposition, and lithography. Therefore, a special emphasis was placed on nano mechanical processes, mechanochemical reaction by potassium hydroxide solution etching, and mechanical and electrical approaches. Several important surface characterization techniques consisting of scanning tunneling microscopy and related techniques, such as scanning probe microscopy and AFM, were also discussed.

  4. Deactivation of the SR-71 Program at Beale Air Force Base, California

    Science.gov (United States)

    1989-07-01

    240 Annual 80 - - 1 hcur 188 470 - Annual 41 - 100 1 houar 11 23,000 40,000 8 hOUZ 8 10,000 10,000 s02 1 hour 26 655 - 3 hor 24 - 1,300 24 hour 21 131...addition, Mr. Robert Holland of California Depart- ment of Fish and Game (CDFG) was contacted to determine if there were any records of State-listed plants...Assessment: Beale Air Force Base Robert Woodson, Beale AFB Engineering Group John Thomson, Beale AFB Engineering Group Tracy Kissler, Beale AFB Engineering

  5. Applying model analysis to a resource-based analysis of the Force and Motion Conceptual Evaluation

    Directory of Open Access Journals (Sweden)

    Trevor I. Smith

    2014-07-01

    Full Text Available Previously, we analyzed the Force and Motion Conceptual Evaluation in terms of a resources-based model that allows for clustering of questions so as to provide useful information on how students correctly or incorrectly reason about physics. In this paper, we apply model analysis to show that the associated model plots provide more information regarding the results of investigations using these question clusters than normalized gain graphs. We provide examples from two different institutions to show how the use of model analysis with our redefined clusters can provide previously hidden insight into the effectiveness of instruction.

  6. Atomic force microscopy based nanoindentation study of onion abaxial epidermis walls in aqueous environment

    Energy Technology Data Exchange (ETDEWEB)

    Xi, Xiaoning; Tittmann, Bernhard [Department of Engineering Science and Mechanics, Pennsylvania State University, University Park, Pennsylvania 16802 (United States); Kim, Seong H. [Department of Chemical Engineering, Pennsylvania State University, University Park, Pennsylvania 16802 (United States)

    2015-01-14

    An atomic force microscopy based nanoindentation method was employed to study how the structure of cellulose microfibril packing and matrix polymers affect elastic modulus of fully hydrated primary plant cell walls. The isolated, single-layered abaxial epidermis cell wall of an onion bulb was used as a test system since the cellulose microfibril packing in this cell wall is known to vary systematically from inside to outside scales and the most abundant matrix polymer, pectin, can easily be altered through simple chemical treatments such as ethylenediaminetetraacetic acid and calcium ions. Experimental results showed that the pectin network variation has significant impacts on the cell wall modulus, and not the cellulose microfibril packing.

  7. Final Environmental Assessment for the Okaloosa Regional Airport Expansion at Eglin Air Force Base, FL

    Science.gov (United States)

    2006-06-01

    proposed to be a N/S Corporation 5- Brush system, would require a power usage between 0.5 and 3.4 amps maximum for the wash cycle, which is a minimal...a water recovery system. The water recovery system of the proposed car wash model (N/S Corporation 5- Brush System) is built to reclaim...Expansion at Eglin Air Force Base, FL Erica L. Teets , SAIC NEPA Specialist Planner/Author B.S. Biochemistry M.A. Biology M.S. Biological

  8. The scaled-charge additive force field for amino acid based ionic liquids

    DEFF Research Database (Denmark)

    Fileti, E. E.; Chaban, V. V.

    2014-01-01

    Ionic liquids (ILs) constitute an emerging research field. New ILs involve more and more organic and inorganic ions. Amino acid based ILs (AAILs) represent a specific interest due to their evolutional connection to proteins. We report a new non-polarizable force field (FF) for the eight AAILs...... comprising 1-ethyl-3-methylimidazolium cation and amino acid anions. The anions were obtained via deprotonation of carboxyl group. Specific cation-anion non-covalent interactions were taken into account by computing electrostatic potential for ion pairs. The van der Waals interactions were adopted from...

  9. Operable Unit 1 remedial investigation report, Eielson Air Force Base, Alaska

    International Nuclear Information System (INIS)

    Gilmore, T.J.; Fruland, R.M.; Liikala, T.L.

    1994-06-01

    This remedial investigation report for operable Unit 1 (OU-1) at Eielson Air Force Base presents data, calculations, and conclusions as to the nature and extent of surface and subsurface contamination at the eight source areas that make up OU-1. The information is based on the 1993 field investigation result and previous investigations. This report is the first in a set of three for OU-1. The other reports are the baseline risk assessment and feasibility study. The information in these reports will lead to a Record of Decision that will guide and conclude the environmental restoration effort for OU-1 at Eielson Air Force Base. The primary contaminants of concern include fuels and fuel-related contaminants (diesel; benzene, toluene, ethylbenzene, and xylene; total petroleum hydrocarbon; polycyclic aromatic hydrocarbons), maintenance-related solvents and cleaners (volatile chlorinated hydrocarbons such as trichloroothylene), polychlorinated biphenyls, and dichlorodiphenyltrichloroethane (DDT). The origins of contaminants of concern include leaks from storage tanks, drums and piping, and spills. Ongoing operations and past sitewide practices also contribute to contaminants of concern at OU-1 source areas. These include spraying mixed oil and solvent wastes on unpaved roads and aerial spraying of DDT

  10. Operable Unit 1 remedial investigation report, Eielson Air Force Base, Alaska

    Energy Technology Data Exchange (ETDEWEB)

    Gilmore, T.J.; Fruland, R.M.; Liikala, T.L. [and others

    1994-06-01

    This remedial investigation report for operable Unit 1 (OU-1) at Eielson Air Force Base presents data, calculations, and conclusions as to the nature and extent of surface and subsurface contamination at the eight source areas that make up OU-1. The information is based on the 1993 field investigation result and previous investigations. This report is the first in a set of three for OU-1. The other reports are the baseline risk assessment and feasibility study. The information in these reports will lead to a Record of Decision that will guide and conclude the environmental restoration effort for OU-1 at Eielson Air Force Base. The primary contaminants of concern include fuels and fuel-related contaminants (diesel; benzene, toluene, ethylbenzene, and xylene; total petroleum hydrocarbon; polycyclic aromatic hydrocarbons), maintenance-related solvents and cleaners (volatile chlorinated hydrocarbons such as trichloroothylene), polychlorinated biphenyls, and dichlorodiphenyltrichloroethane (DDT). The origins of contaminants of concern include leaks from storage tanks, drums and piping, and spills. Ongoing operations and past sitewide practices also contribute to contaminants of concern at OU-1 source areas. These include spraying mixed oil and solvent wastes on unpaved roads and aerial spraying of DDT.

  11. Ridership impacts of South Florida's EASY smart card.

    Science.gov (United States)

    2013-07-01

    Smart card-based Automated Fare Collection Systems (AFCS) are being increasingly deployed in transit systems across the US. Miami-Dade Transit (MDT) has recently deployed such a system branded as the EASY Card. The South Florida Regional Transportati...

  12. Environmental Assessment for Infrastructure Improvements in the Base Developed Area at Eielson Air Force Base, Alaska

    Science.gov (United States)

    2011-03-01

    and Devonian periods of the Paleozoic era. The hills to the northeast of the base are composed of Precambrian and Paleozoic -age schists, micaceous...material built up as poorly sorted material to a thickness of between 3 and 8 feet and providing a firm platform for base construction that is devoid of

  13. Climate responses to SATIRE and SIM-based spectral solar forcing in a 3D atmosphere-ocean coupled GCM

    Directory of Open Access Journals (Sweden)

    Wen Guoyong

    2017-01-01

    Full Text Available We apply two reconstructed spectral solar forcing scenarios, one SIM (Spectral Irradiance Monitor based, the other the SATIRE (Spectral And Total Irradiance REconstruction modeled, as inputs to the GISS (Goddard Institute for Space Studies GCMAM (Global Climate Middle Atmosphere Model to examine climate responses on decadal to centennial time scales, focusing on quantifying the difference of climate response between the two solar forcing scenarios. We run the GCMAM for about 400 years with present day trace gas and aerosol for the two solar forcing inputs. We find that the SIM-based solar forcing induces much larger long-term response and 11-year variation in global averaged stratospheric temperature and column ozone. We find significant decreasing trends of planetary albedo for both forcing scenarios in the 400-year model runs. However the mechanisms for the decrease are very different. For SATIRE solar forcing, the decreasing trend of planetary albedo is associated with changes in cloud cover. For SIM-based solar forcing, without significant change in cloud cover on centennial and longer time scales, the apparent decreasing trend of planetary albedo is mainly due to out-of-phase variation in shortwave radiative forcing proxy (downwelling flux for wavelength >330 nm and total solar irradiance (TSI. From the Maunder Minimum to present, global averaged annual mean surface air temperature has a response of ~0.1 °C to SATIRE solar forcing compared to ~0.04 °C to SIM-based solar forcing. For 11-year solar cycle, the global surface air temperature response has 3-year lagged response to either forcing scenario. The global surface air 11-year temperature response to SATIRE forcing is about 0.12 °C, similar to recent multi-model estimates, and comparable to the observational-based evidence. However, the global surface air temperature response to 11-year SIM-based solar forcing is insignificant and inconsistent with observation-based evidence.

  14. Experimental Implementation of a Model-Based Inverse Filter to Attenuate Hysteresis in an Atomic Force Microscope

    National Research Council Canada - National Science Library

    Hatch, Andrew; Smith, Ralph G; De, Tathagata

    2004-01-01

    This paper addresses the development and experimental validation of a model-based, open loop control design for mitigating the frequency-dependent effects of hysteresis in an atomic force microscope (AFM...

  15. Operations and Maintenance Manual for Expanded Bioventing System at Buildings 2034/2035, Fairchild Air Force Base, Washington

    National Research Council Canada - National Science Library

    1996-01-01

    This Operations and Maintenance (O&M) Manual has been created as a guide for monitoring and maintaining the performance of the full-scale bioventing blower system and vent well plumbing at Fairchild Air Force Base (AFB), Washington...

  16. American Recovery and Reinvestment Act (ARRA) Federal Energy Management Program Technical Assistance Project 224 Altus Air Force Base Solar Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Russo, Bryan J.

    2010-09-30

    The principal goal of this project was to evaluate altus Air Force Base for building integrated silicon or thin film module photovoltaic opportunities. This report documents PNNL's efforts and documents study conclusions.

  17. Environmental Assessment - Construct a Ground-to-Air Transmitter and Receiver (GATR) Facility at Grand Forks Air Force Base

    National Research Council Canada - National Science Library

    2006-01-01

    ...) facility on Grand Forks Air Force Base (AFB), North Dakota. The Communication Squadron is preparing to install new GATR communication antennas and systems, for tactical aircraft control and commercial air traffic control...

  18. Environmental Footprint Analysis of Steam Enhanced Extraction Remedy: Former Williams Air Force Base, Site ST012 Mesa, AZ

    Science.gov (United States)

    This green remediation (GR) study quantifies environmental footprint for an In-Situ Thermal Treatment (ISTT) remedy using Steam Enhanced Extraction (SEE) for Site ST012 located on the Former Williams Air Force Base (AFB) in Mesa, Arizona.

  19. Injury Reduction Effectiveness of Prescribing Running Shoes Based on Foot Shape in Air Force Basic Military Training

    National Research Council Canada - National Science Library

    Knapik, Joseph J; Brosch, Lorie C; Venuto, Margaret; Swedler, David I; Bullock, Steven H; Gaines, Lorraine S; Murphy, Ryan J; Canada, Sara E; Hoedebecke, Edward L; Tobler, Steven K

    2008-01-01

    In response to a request from the Military Training Task Force of the Defense Safety Oversight Council this study examined whether prescribing running shoes based on the shape of the plantar surface...

  20. Climate variability during the Medieval Climate Anomaly and Little Ice Age based on ostracod faunas and shell geochemistry from Biscayne Bay, Florida: Chapter 14

    Science.gov (United States)

    Cronin, Thomas M.; Wingard, G. Lynn; Dwyer, Gary S.; Swart, Peter K.; Willard, Debra A.; Albietz, Jessica

    2012-01-01

    An 800-year-long environmental history of Biscayne Bay, Florida, is reconstructed from ostracod faunal and shell geochemical (oxygen, carbon isotopes, Mg/Ca ratios) studies of sediment cores from three mudbanks in the central and southern parts of the bay. Using calibrations derived from analyses of modern Biscayne and Florida Bay ostracods, palaeosalinity oscillations associated with changes in precipitation were identified. These oscillations reflect multidecadal- and centennial-scale climate variability associated with the Atlantic Multidecadal Oscillation during the late Medieval Climate Anomaly (MCA) and the Little Ice Age (LIA). Evidence suggests wetter regional climate during the MCA and drier conditions during the LIA. In addition, twentieth century anthropogenic modifications to Everglades hydrology influenced bay circulation and/or processes controlling carbon isotopic composition.

  1. Hypersonic force measurements using internal balance based on optical micromachined Fabry-Perot interferometry

    Science.gov (United States)

    Qiu, Huacheng; Min, Fu; Zhong, Shaolong; Song, Xin; Yang, Yanguang

    2018-03-01

    Force measurements using wind tunnel balance are necessary for determining a variety of aerodynamic performance parameters, while the harsh environment in hypersonic flows requires that the measurement instrument should be reliable and robust, in against strong electromagnetic interference, high vacuum, or metal (oxide) dusts. In this paper, we demonstrated a three-component internal balance for hypersonic aerodynamic force measurements, using novel optical micromachined Fabry-Perot interferometric (FPI) strain gauges as sensing elements. The FPI gauges were fabricated using Micro-Opto-Electro-Mechanical Systems (MOEMS) surface and bulk fabrication techniques. High-reflectivity coatings are used to form a high-finesse Fabry-Perot cavity, which benefits a high resolution. Antireflective and passivation coatings are used to reduce unwanted interferences. The FPI strain gauge based balance has been calibrated and evaluated in a Mach 5 hypersonic flow. The results are compared with the traditional technique using the foil resistive strain gauge balance, indicating that the proposed balance based on the MOEMS FPI strain gauge is reliable and robust and is potentially suitable for the hypersonic wind tunnel harsh environment.

  2. Feature Selection and Predictors of Falls with Foot Force Sensors Using KNN-Based Algorithms

    Directory of Open Access Journals (Sweden)

    Shengyun Liang

    2015-11-01

    Full Text Available The aging process may lead to the degradation of lower extremity function in the elderly population, which can restrict their daily quality of life and gradually increase the fall risk. We aimed to determine whether objective measures of physical function could predict subsequent falls. Ground reaction force (GRF data, which was quantified by sample entropy, was collected by foot force sensors. Thirty eight subjects (23 fallers and 15 non-fallers participated in functional movement tests, including walking and sit-to-stand (STS. A feature selection algorithm was used to select relevant features to classify the elderly into two groups: at risk and not at risk of falling down, for three KNN-based classifiers: local mean-based k-nearest neighbor (LMKNN, pseudo nearest neighbor (PNN, local mean pseudo nearest neighbor (LMPNN classification. We compared classification performances, and achieved the best results with LMPNN, with sensitivity, specificity and accuracy all 100%. Moreover, a subset of GRFs was significantly different between the two groups via Wilcoxon rank sum test, which is compatible with the classification results. This method could potentially be used by non-experts to monitor balance and the risk of falling down in the elderly population.

  3. [Study on force feedback of acupuncture manipulation at Jianliao (TE 14) based on VOXEL-MAN].

    Science.gov (United States)

    Wang, Hai-sheng; Yan, Zhen-guo; Cheng, Zhuo; Shao, Shui-jin; Zhuang, Tian-ge

    2009-09-01

    To discuss the mechanical virtual reality when acupuncture on Jianliao (TE 14) so as to get perform perceptual knowledge of acupuncture for beginners through studying 3D reconstruction of surrounding tissues of this acupoint. Related tissues were segmented and reconstructed by establishing mathematics model based on the operational platform of VOXEL-MAN (vision reappearance); and mechanical model was constructed and fused with related data of virtual human (touch reappearance); data communication between the force feedback apparatus and the operational platform of virtual human were set up by interchanging vision reappearance module and touch reappearance module. In Linux system, the operator could experience the mechanical changes while needle-tip passing various tissues of Jianliao (TE 14) as well as lifting and thrusting evenly in needling process through the force feedback apparatus. Based on the platform of VOXEL-MAN, the sensation of needling at jianliao (TE 14) could be reappeared idealy by strength feedback instrument, so that the beginners could imitate, learn and practice the virtual acupuncture.

  4. Modelling of Ion Transport in Solids with a General Bond Valence Based Force-Field

    Directory of Open Access Journals (Sweden)

    S. Adams

    2010-12-01

    Full Text Available Empirical bond length - bond valence relations provide insight into the link between structure of and ion transport in solid electrolytes. Building on our earlier systematic adjustment of bond valence (BV parameters to the bond softness, here we discuss how the squared BV mismatch can be linked to the absolute energy scale and used as a general Morse-type interaction potential for analyzing low-energy pathways in ion conducting solid or mixed conductors either by an energy landscape approach or by molecular dynamics (MD simulations. For a wide range of Lithium oxides we could thus model ion transport revealing significant differences to an earlier geometric approach. Our novel BV-based force-field has also been applied to investigate a range of mixed conductors, focusing on cathode materials for lithium ion battery (LIB applications to promote a systematic design of LIB cathodes that combine high energy density with high power density. To demonstrate the versatility of the new BV-based force-field it is applied in exploring various strategies to enhance the power performance of safe low cost LIB materials (LiFePO4, LiVPO4F, LiFeSO4F, etc..

  5. FLORIDA TOWER FOOTPRINT EXPERIMENTS

    Energy Technology Data Exchange (ETDEWEB)

    WATSON,T.B.; DIETZ, R.N.; WILKE, R.; HENDREY, G.; LEWIN, K.; NAGY, J.; LECLERC, M.

    2007-01-01

    The Florida Footprint experiments were a series of field programs in which perfluorocarbon tracers were released in different configurations centered on a flux tower to generate a data set that can be used to test transport and dispersion models. These models are used to determine the sources of the CO{sub 2} that cause the fluxes measured at eddy covariance towers. Experiments were conducted in a managed slash pine forest, 10 km northeast of Gainesville, Florida, in 2002, 2004, and 2006 and in atmospheric conditions that ranged from well mixed, to very stable, including the transition period between convective conditions at midday to stable conditions after sun set. There were a total of 15 experiments. The characteristics of the PFTs, details of sampling and analysis methods, quality control measures, and analytical statistics including confidence limits are presented. Details of the field programs including tracer release rates, tracer source configurations, and configuration of the samplers are discussed. The result of this experiment is a high quality, well documented tracer and meteorological data set that can be used to improve and validate canopy dispersion models.

  6. Simulation Research on Micro Contact Based on Force in Silicon Wafer Rotation Grinding

    Science.gov (United States)

    Ren, Qinglei; Wei, Xin; Xie, Xiaozhu; Hu, Wei

    2017-10-01

    Silicon wafer rotation grinding with cup type diamond wheel is a typical ultra precision grinding process. In this paper, a simulation model based on force for micro contact between wheel micro unit and silicon wafer is established from the stable ductile grinding process. Micro contact process in grinding is simulated using the nonlinear explicit finite element analysis software LS-DYNA. The stress-strain results on silicon wafer and wheel micro unit are analyzed by finite element method. The results show that the critical displacement and load corresponding elastic to plastic - plastic to brittle exist on silicon wafer. In silicon plastic zone tangential sliding can produce plastic groove and uplift. Wear of wheel micro unit can be based on the simulation data to judge. The research provides support for wafer grinding and wheel wear mechanism.

  7. Eielson Air Force Base operable unit 2 and other areas record of decision

    International Nuclear Information System (INIS)

    Lewis, R.E.; Smith, R.M.

    1994-10-01

    This decision document presents the selected remedial actions and no action decisions for Operable Unit 2 (OU2) at Eielson Air Force Base (AFB), Alaska, chosen in accordance with state and federal regulations. This document also presents the decision that no further action is required for 21 other source areas at Eielson AFB. This decision is based on the administrative record file for this site. OU2 addresses sites contaminated by leaks and spills of fuels. Soils contaminated with petroleum products occur at or near the source of contamination. Contaminated subsurface soil and groundwater occur in plumes on the top of a shallow groundwater table that fluctuates seasonally. These sites pose a risk to human health and the environment because of ingestion, inhalation, and dermal contact with contaminated groundwater. The purpose of this response is to prevent current or future exposure to the contaminated groundwater, to reduce further contaminant migration into the groundwater, and to remediate groundwater

  8. Florida's Urban Environment. Teacher's Guide.

    Science.gov (United States)

    Brown, Mark; And Others

    This unit begins with the historical development of Florida and analyzes development from the perspective of an energy system. The unit deals with the urbanization process currently taking place in Florida and explores where it may be leading. Lessons are designed for individualized instruction or for use by students in small groups. In some cases…

  9. Novel Friction Law for the Static Friction Force based on Local Precursor Slipping

    OpenAIRE

    Katano, Yu; Nakano, Ken; Otsuki, Michio; Matsukawa, Hiroshi

    2014-01-01

    The sliding of a solid object on a solid substrate requires a shear force that is larger than the maximum static friction force. It is commonly believed that the maximum static friction force is proportional to the loading force and does not depend on the apparent contact area. The ratio of the maximum static friction force to the loading force is called the static friction coefficient µ M, which is considered to be a constant. Here, we conduct experiments demonstrating that the static fricti...

  10. Environmental Assessment Addressing the Expansion of Sortie-Operations at Moody Air Force Base, Georgia

    Science.gov (United States)

    2012-08-01

    Homerville 2,681 Georgia Moody 1 and Moody 2 North MOAs Blakely 5,176 Georgia Moody 3 MOA Live Oak 7,169 Florida Live Oak MOA Louisville 2,711 Georgia...Wildlife Management Area Newton George T. Bagby State Park Fort Gaines Kolomoki Mounds State Park Blakely Georgia Moody 3 MOA Lake Walter F. George...emphasizes the prevention of pollution of groundwater. The Superfund Amendments and Reauthorization Act ( SARA ) of 1986 mandates strong clean-up standards

  11. Environmental Assessment of 2005 Base Closure and Realignment Actions at Buckley Air Force Base, Colorado

    Science.gov (United States)

    2008-05-01

    Buckley AFB (BAFB 2004). Bullfrog ( Rana catesbeiana ) and northern leopard frog ( Rana pipiens) have been observed on the base but are generally found...phasianellus jamesii -- E Potentially present; no known nesting locations on Buckley AFB. Amphibians Northern leopard frog Rana pipiens -- SC

  12. Novel friction law for the static friction force based on local precursor slipping.

    Science.gov (United States)

    Katano, Yu; Nakano, Ken; Otsuki, Michio; Matsukawa, Hiroshi

    2014-09-10

    The sliding of a solid object on a solid substrate requires a shear force that is larger than the maximum static friction force. It is commonly believed that the maximum static friction force is proportional to the loading force and does not depend on the apparent contact area. The ratio of the maximum static friction force to the loading force is called the static friction coefficient µM, which is considered to be a constant. Here, we conduct experiments demonstrating that the static friction force of a slider on a substrate follows a novel friction law under certain conditions. The magnitude of µM decreases as the loading force increases or as the apparent contact area decreases. This behavior is caused by the slip of local precursors before the onset of bulk sliding and is consistent with recent theory. The results of this study will develop novel methods for static friction control.

  13. Final Environmental Impact Statement, Brooks City Base Project, Brooks Air Force Base, Texas

    Science.gov (United States)

    2001-03-01

    inmigrants to fill the jobs, and an inmigration time lag in response to the new jobs not filled by existing residents of the MSA. Under Scenario A...that has been determined to pose no risk to human health or the environment. Property associated with active IRP sites and/or areas of concern (AOCs...academia, and other government agencies at Brooks AFB to enhance its aerospace medicine and environmental and occupational health mission. The base has

  14. Estimation of Power Consumption in the Circular Sawing of Stone Based on Tangential Force Distribution

    Science.gov (United States)

    Huang, Guoqin; Zhang, Meiqin; Huang, Hui; Guo, Hua; Xu, Xipeng

    2018-04-01

    Circular sawing is an important method for the processing of natural stone. The ability to predict sawing power is important in the optimisation, monitoring and control of the sawing process. In this paper, a predictive model (PFD) of sawing power, which is based on the tangential force distribution at the sawing contact zone, was proposed, experimentally validated and modified. With regard to the influence of sawing speed on tangential force distribution, the modified PFD (MPFD) performed with high predictive accuracy across a wide range of sawing parameters, including sawing speed. The mean maximum absolute error rate was within 6.78%, and the maximum absolute error rate was within 11.7%. The practicability of predicting sawing power by the MPFD with few initial experimental samples was proved in case studies. On the premise of high sample measurement accuracy, only two samples are required for a fixed sawing speed. The feasibility of applying the MPFD to optimise sawing parameters while lowering the energy consumption of the sawing system was validated. The case study shows that energy use was reduced 28% by optimising the sawing parameters. The MPFD model can be used to predict sawing power, optimise sawing parameters and control energy.

  15. Web-based evaluation of experts' opinions on impacted maxillary canines forced eruption using CBCT.

    Science.gov (United States)

    Miresmaeili, Amirfarhang; Farhadian, Nasrin; Mollabashi, Vahid; Yousefi, Faezeh

    2015-01-01

    This study aims at examining the difficulty in performing forced eruption of impacted maxillary canines, using CBCT information and according to experienced orthodontist's opinion. The second aim was to find the most important factors related to this decision. Based on a careful literature review on impacted maxillary canines, ten main factors were selected to assess difficulties associated with impacted teeth. Thirty six consecutive patients with 50 impacted maxillary canines were examined and variables were measured for each impacted tooth using Dolphin 3D software. Ten orthodontists assessed the radiographs of teeth and provided their opinion on the difficulty in bringing impacted teeth into occlusion named subjective degree of difficulty (SDD). The correlation established between mean SDD of each tooth and measured variables were analyzed by means of linear regression. Mean SDD was 6.45 ± 1.22 for all 50 teeth. Linear regression showed a high coefficient of correlation between mean SDD and age, dilacerations, vertical height, angulation and horizontal overlap (P impacted maxillary canines forced eruption, according to the opinion of experienced orthodontists, the factors age, dilaceration, angulation, overlap and vertical distance from the occlusal plane are the most important variables.

  16. Simulation of Pedestrian Crossing Behaviors at Unmarked Roadways Based on Social Force Model

    Directory of Open Access Journals (Sweden)

    Cao Ningbo

    2017-01-01

    Full Text Available Limited pedestrian microcosmic simulation models focus on the interactions between pedestrians and vehicles at unmarked roadways. Pedestrians tend to head to the destinations directly through the shortest path. So, pedestrians have inclined trajectories pointing destinations. Few simulation models have been established to describe the mechanisms underlying the inclined trajectories when pedestrians cross unmarked roadways. To overcome these shortcomings, achieve solutions for optimal design features before implementation, and help to make the design more rational, the paper establishes a modified social force model for interactions between pedestrians and vehicles at unmarked roadways. To achieve this goal, stop/go decision-making model based on gap acceptance theory and conflict avoidance models were developed to make social force model more appropriate in simulating pedestrian crossing behaviors at unmarked roadways. The extended model enables the understanding and judgment ability of pedestrians about the traffic environment and guides pedestrians to take the best behavior to avoid conflict and keep themselves safe. The comparison results of observed pedestrians’ trajectories and simulated pedestrians’ trajectories at one unmarked roadway indicate that the proposed model can be used to simulate pedestrian crossing behaviors at unmarked roadways effectively. The proposed model can be used to explore pedestrians’ trajectories variation at unmarked roadways and improve pedestrian safety facilities.

  17. Robins Air Force Base integrated resource assessment. Volume 3, Resource assessment

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, G.P.; Keller, J.M.; Stucky, D.J.; Wahlstrom, R.R.; Larson, L.L.

    1993-10-01

    The US Air Force Materiel Command (AFMC) has tasked the US Department of Energy (DOE) Federal Energy Management Program (FEMP), supported by the Pacific Northwest Laboratory (PNL), to identify, evaluate, and assist in acquiring all cost-effective energy projects at Robins Air Force Base (AFB). This is part of a model program that PNL is designing to support energy-use decisions in the federal sector. This report provides the results of the fossil fuel and electric energy resource opportunity (ERO) assessments performed by PNL at the AFMC Robins AFB facility located approximately 15 miles south of Macon, Georgia. It is a companion report to Volume 1, Executive Summary, and Volume 2, Baseline Detail. The results of the analyses of EROs are presented in 13 common energy end-use categories (e.g., boilers and furnaces, service hot water, and building lighting). A narrative-description of each ERO is provided, including information on the installed cost, energy and dollar savings; impacts on operation and maintenance (O&M); and, when applicable, a discussion of energy supply and demand, energy security, and environmental issues. A description of the evaluation methodologies and technical and cost assumptions is also provided for each ERO. Summary tables present the cost-effectiveness of energy end-use equipment before and after the implementation of each ERO and present the results of the life-cycle cost (LCC) analysis indicating the net present value (NPV) and savings to investment ratio (SIR) of each ERO.

  18. Web-based evaluation of experts' opinions on impacted maxillary canines forced eruption using CBCT

    Directory of Open Access Journals (Sweden)

    Amirfarhang Miresmaeili

    2015-04-01

    Full Text Available AIM: This study aims at examining the difficulty in performing forced eruption of impacted maxillary canines, using CBCT information and according to experienced orthodontist's opinion. The second aim was to find the most important factors related to this decision. METHODS: Based on a careful literature review on impacted maxillary canines, ten main factors were selected to assess difficulties associated with impacted teeth. Thirty six consecutive patients with 50 impacted maxillary canines were examined and variables were measured for each impacted tooth using Dolphin 3D software. Ten orthodontists assessed the radiographs of teeth and provided their opinion on the difficulty in bringing impacted teeth into occlusion named subjective degree of difficulty (SDD. The correlation established between mean SDD of each tooth and measured variables were analyzed by means of linear regression. RESULTS: Mean SDD was 6.45 ± 1.22 for all 50 teeth. Linear regression showed a high coefficient of correlation between mean SDD and age, dilacerations, vertical height, angulation and horizontal overlap (P < 0.05. CONCLUSION: To predict the difficulty of impacted maxillary canines forced eruption, according to the opinion of experienced orthodontists, the factors age, dilaceration, angulation, overlap and vertical distance from the occlusal plane are the most important variables.

  19. A Deployment Scheme Based Upon Virtual Force for Directional Sensor Networks

    Directory of Open Access Journals (Sweden)

    Chiu-Kuo Liang

    2015-11-01

    Full Text Available A directional sensor network is composed of many directional sensor nodes. Unlike conventional omni-directional sensors that always have an omni-angle of sensing range; directional sensors may have a limited angle of sensing range due to technical constraints or cost considerations. Area coverage is still an essential issue in a directional sensor network. In this paper, we study the area coverage problem in directional sensor networks with mobile sensors, which can move to the correct places to get high coverage. We present distributed self-deployment schemes of mobile sensors. After sensors are randomly deployed, each sensor calculates its next new location to move in order to obtain a better coverage than previous one. The locations of sensors are adjusted round by round so that the coverage is gradually improved. Based on the virtual force of the directional sensors, we design a scheme, namely Virtual force scheme. Simulation results show the effectiveness of our scheme in term of the coverage improvement.

  20. A Two-Dimensional Deflection Sensor Based on Force Sensing Resistors

    Directory of Open Access Journals (Sweden)

    Chuangqiang Guo

    2017-01-01

    Full Text Available A flexible deflection sensor for elastic shaft with the capability of measuring the amplitude and direction of bending is introduced in this paper. A thin force sensing resistors (FSR film is taken as its basic material, which is sandwiched by an elastomer layer and a printed circuit board (PCB with detecting electrode grids. Two fix rings are used to fix the three thin components perpendicularly to the longitudinal direction of the flexible shaft. When the shaft bends under forces, the fix rings will generate a normal pressure on FSR, which will cause the change of the resistance. Therefore, the amplitude of bending can be got based on the value of resistance. The electrode grid on the PCB is divided into four detection areas used to estimate the distribution of normal pressure on the FSR; thus the bending direction of shaft can also be obtained. Test results of a prototype (140 mm in length show that the amplitude of deflection can reach 30 mm and the sensitivities of sensor are 40.37, 32.8, 37.77, and 39.47 mV/mm in the four directions, respectively. The proposed flexible deflection sensor can be applied in continuum robots or other applications, which require rapid measurement of bending amplitude and direction.

  1. Social Force Model-Based Group Behavior Simulation in Virtual Geographic Environments

    Directory of Open Access Journals (Sweden)

    Lin Huang

    2018-02-01

    Full Text Available Virtual geographic environments (VGEs are extensively used to explore the relationship between humans and environments. Crowd simulation provides a method for VGEs to represent crowd behaviors that are observed in the real world. The social force model (SFM can simulate interactions among individuals, but it has not sufficiently accounted for inter-group and intra-group behaviors which are important components of crowd dynamics. We present the social group force model (SGFM, based on an extended SFM, to simulate group behaviors in VGEs with focuses on the avoiding behaviors among different social groups and the coordinate behaviors among subgroups that belong to one social group. In our model, psychological repulsions between social groups make them avoid with the whole group and group members can stick together as much as possible; while social groups are separated into several subgroups, the rear subgroups try to catch up and keep the whole group cohesive. We compare the simulation results of the SGFM with the extended SFM and the phenomena in videos. Then we discuss the function of Virtual Reality (VR in crowd simulation visualization. The results indicate that the SGFM can enhance social group behaviors in crowd dynamics.

  2. Field investigation source area ST58 old Quartermaster service station, Eielson Air Force Base, Alaska

    Energy Technology Data Exchange (ETDEWEB)

    Liikala, T.L.; Evans, J.C.

    1995-01-01

    Source area ST58 is the site of the old Quartermaster service station at Eielson Air Force Base, Alaska. The source area is one of several Source Evaluation Report sites being investigated by Pacific Northwest Laboratory for the US Air Force as candidates for no further remedial action, interim removal action, or a remedial investigation/feasibility study under a Federal Facilities Agreement. The purpose of this work was to characterize source area ST58 and excavate the most contaminated soils for use in composting treatability studies. A field investigation was conducted to determine the nature and extent of soil contamination. The field investigation entailed a records search; grid node location, surface geophysical, and soil gas surveys; and test pit soil sampling. Soil excavation followed based on the results of the field investigation. The site was backfilled with clean soil. Results from this work indicate close spatial correlation between screening instruments, used during the field investigation and soil excavation, and laboratory analyses. Gasoline was identified as the main subsurface contaminant based on the soil gas surveys and test pit soil sampling. A center of contamination was located near the northcentral portion of the source area, and a center was located in the northwestern comer. The contamination typically occurred near or below a former soil horizon probably as a result of surface spills and leaks from discontinuities and/or breaks in the underground piping. Piping locations were delineated during the surface geophysical surveys and corresponded very well to unscaled drawings of the site. The high subsurface concentrations of gasoline detected in the northwestern comer of the source area probably reflect ground-water contamination and/or possibly floating product.

  3. Force Concept Inventory-Based Multiple-Choice Test for Investigating Students' Representational Consistency

    Science.gov (United States)

    Nieminen, Pasi; Savinainen, Antti; Viiri, Jouni

    2010-01-01

    This study investigates students' ability to interpret multiple representations consistently (i.e., representational consistency) in the context of the force concept. For this purpose we developed the Representational Variant of the Force Concept Inventory (R-FCI), which makes use of nine items from the 1995 version of the Force Concept Inventory…

  4. FxLMS Method for Suppressing In-Wheel Switched Reluctance Motor Vertical Force Based on Vehicle Active Suspension System

    Directory of Open Access Journals (Sweden)

    Yan-yang Wang

    2014-01-01

    Full Text Available The vibration of SRM obtains less attention for in-wheel motor applications according to the present research works. In this paper, the vertical component of SRM unbalanced radial force, which is named as SRM vertical force, is taken into account in suspension performance for in-wheel motor driven electric vehicles (IWM-EV. The analysis results suggest that SRM vertical force has a great effect on suspension performance. The direct cause for this phenomenon is that SRM vertical force is directly exerted on the wheel, which will result in great variation in tyre dynamic load and the tyre will easily jump off the ground. Furthermore, the frequency of SRM vertical force is broad which covers the suspension resonance frequencies. So it is easy to arouse suspension resonance and greatly damage suspension performance. Aiming at the new problem, FxLMS (filtered-X least mean square controller is proposed to improve suspension performance. The FxLMS controller is based on active suspension system which can generate the controllable force to suppress the vibration caused by SRM vertical force. The conclusion shows that it is effective to take advantage of active suspensions to reduce the effect of SRM vertical force on suspension performance.

  5. A review of measurement-based assessments of the aerosol direct radiative effect and forcing

    Directory of Open Access Journals (Sweden)

    H. Yu

    2006-01-01

    Full Text Available Aerosols affect the Earth's energy budget directly by scattering and absorbing radiation and indirectly by acting as cloud condensation nuclei and, thereby, affecting cloud properties. However, large uncertainties exist in current estimates of aerosol forcing because of incomplete knowledge concerning the distribution and the physical and chemical properties of aerosols as well as aerosol-cloud interactions. In recent years, a great deal of effort has gone into improving measurements and datasets. It is thus feasible to shift the estimates of aerosol forcing from largely model-based to increasingly measurement-based. Our goal is to assess current observational capabilities and identify uncertainties in the aerosol direct forcing through comparisons of different methods with independent sources of uncertainties. Here we assess the aerosol optical depth (τ, direct radiative effect (DRE by natural and anthropogenic aerosols, and direct climate forcing (DCF by anthropogenic aerosols, focusing on satellite and ground-based measurements supplemented by global chemical transport model (CTM simulations. The multi-spectral MODIS measures global distributions of aerosol optical depth (τ on a daily scale, with a high accuracy of ±0.03±0.05τ over ocean. The annual average τ is about 0.14 over global ocean, of which about 21%±7% is contributed by human activities, as estimated by MODIS fine-mode fraction. The multi-angle MISR derives an annual average AOD of 0.23 over global land with an uncertainty of ~20% or ±0.05. These high-accuracy aerosol products and broadband flux measurements from CERES make it feasible to obtain observational constraints for the aerosol direct effect, especially over global the ocean. A number of measurement-based approaches estimate the clear-sky DRE (on solar radiation at the top-of-atmosphere (TOA to be about -5.5±0.2 Wm-2 (median ± standard error from various methods over the global ocean. Accounting for thin cirrus

  6. Nanoindentación basada en espectroscopia de fuerzas con un microscopio de fuerza atómica Nanoindentation based on force spectroscopy with an atomic force

    Directory of Open Access Journals (Sweden)

    Mauricio Arroyave Franco

    2008-12-01

    Full Text Available Se presenta la implementación de un método para indentar superficies rígidas a nanoescala utilizando un microscopio de fuerza atómica (Atomic Force Mi-croscopy–AFM. Esta se basa en el modo de espectroscopia de fuerzas (Force Spectroscopy–FS que usualmente se encuentra disponible en los AFM, la cual permite generar un movimiento vertical de la punta AFM sin desplazamiento lateral. Se hizo necesario caracterizar la fuerza aplicada por el AFM para producir la indentación a través de la determinación del factor de sensitividad de la viga AFM. Se pudieron obtener curvas de fuerza versus desplazamiento, características de los sistemas para nanoindentación dinámica Depth–Sensing Indentation (DSI, sin embargo estas curvas no son aptas para diagnóstico de propiedades mecánicas por el método de Oliver & Pharr. Fueron generadas huellas de indentación del orden de 1 nm de profundidad sobre silicio poli-cristalino y del orden de 50 nm de profundidad sobre aluminio aleado 6261. Estos resultados son prometedores en apliaciones con materiales de la era de la nanotecnología que deben ser evaluados en dichas escalas.An implementation of the method for surface indentation based on Atomic Force Microscopy (AFM, is presented. The implementation was done using the Force Spectroscopy (FS usually enabled on this instruments which allow vertical movement of the AFM tip without lateral displacement. Determination of the sensitive factor of the AFM cantilever was necessary to know the applied forces in the indentation process. Force versus depth curves similar to Depth–Sensing Indentation (DSI curves were obtained however these cannot be used for mechanical diagnostics with Oliver & Pharr method. Indentations about 1 nm and 50 nm of depth on polycrystalline Silicon and 6261 Aluminium alloy respectively were produced. These open important applicationsin materials nanotechnology.

  7. A Three-Dimensional Shape-Based Force and Stiffness-Sensing Platform for Tendon-Driven Catheters.

    Science.gov (United States)

    Kouh Soltani, Minou; Khanmohammadi, Sohrab; Ghalichi, Farzan

    2016-06-28

    This paper presents an efficient shape-based three-axial force and stiffness estimator for active catheters commonly implemented in cardiac ablation. The force-sensing capability provides important feedback for catheterization procedures including real-time control and catheter steering in autonomous navigation systems. The proposed platform is based on the introduced accurate and computationally efficient Cosserat rod model for tendon-driven catheters. The proposed nonlinear Kalman filter formulation for contact force estimation along with the developed catheter model provides a real-time force observer robust to nonlinearities and noise covariance uncertainties. Furthermore, the proposed platform enables stiffness estimation in addition to tip contact force sensing in different operational circumstances. The approach incorporates pose measurements which can be achieved using currently developed pose-sensing systems or imaging techniques. The method makes the approach compatible with the range of forces applied in clinical applications. The simulation and experimental results verify the viability of the introduced force and stiffness-sensing technique.

  8. A Three-Dimensional Shape-Based Force and Stiffness-Sensing Platform for Tendon-Driven Catheters

    Directory of Open Access Journals (Sweden)

    Minou Kouh Soltani

    2016-06-01

    Full Text Available This paper presents an efficient shape-based three-axial force and stiffness estimator for active catheters commonly implemented in cardiac ablation. The force-sensing capability provides important feedback for catheterization procedures including real-time control and catheter steering in autonomous navigation systems. The proposed platform is based on the introduced accurate and computationally efficient Cosserat rod model for tendon-driven catheters. The proposed nonlinear Kalman filter formulation for contact force estimation along with the developed catheter model provides a real-time force observer robust to nonlinearities and noise covariance uncertainties. Furthermore, the proposed platform enables stiffness estimation in addition to tip contact force sensing in different operational circumstances. The approach incorporates pose measurements which can be achieved using currently developed pose-sensing systems or imaging techniques. The method makes the approach compatible with the range of forces applied in clinical applications. The simulation and experimental results verify the viability of the introduced force and stiffness-sensing technique.

  9. An Initial Value Calibration Method for the Wheel Force Transducer Based on Memetic Optimization Framework

    Directory of Open Access Journals (Sweden)

    Guoyu Lin

    2013-01-01

    Full Text Available Some initial values of the wheel force transducer (WFT change after being mounted in the vehicle. The traditional static calibration is inadequate to fully obtain these initial values. Aiming to this problem, an online initial value calibration method is proposed. The method does not require any additional calibration equipment or manual operation and just requires the vehicle mounted with the WFT to be driven on a flat road with constant speed. In this way, an initial value mode is constructed and then converted to an optimization problem. To solve this problem and acquire the right initial value, an improved Memetic framework based on particle swarm optimization (PSO and Levenberg-Marquardt (LM is adopted. To verify the effect of the proposed method, the real WFT data is used and the comparative test is carried out. The experiment result shows that the proposed method is superior to the traditional one and can improve the measurement accuracy effectively.

  10. Automated solid-phase subcloning based on beads brought into proximity by magnetic force.

    Science.gov (United States)

    Hudson, Elton P; Nikoshkov, Andrej; Uhlen, Mathias; Rockberg, Johan

    2012-01-01

    In the fields of proteomics, metabolic engineering and synthetic biology there is a need for high-throughput and reliable cloning methods to facilitate construction of expression vectors and genetic pathways. Here, we describe a new approach for solid-phase cloning in which both the vector and the gene are immobilized to separate paramagnetic beads and brought into proximity by magnetic force. Ligation events were directly evaluated using fluorescent-based microscopy and flow cytometry. The highest ligation efficiencies were obtained when gene- and vector-coated beads were brought into close contact by application of a magnet during the ligation step. An automated procedure was developed using a laboratory workstation to transfer genes into various expression vectors and more than 95% correct clones were obtained in a number of various applications. The method presented here is suitable for efficient subcloning in an automated manner to rapidly generate a large number of gene constructs in various vectors intended for high throughput applications.

  11. 1995 Area 1 bird survey/Zone 1, Operable Unit 2, Robins Air Force Base, Georgia

    Energy Technology Data Exchange (ETDEWEB)

    Wade, M.C.

    1995-08-01

    Robins Air Force Base is located in Warner Robins, Georgia, approximately 90 miles southeast of Atlanta, Georgia. As part of the Baseline Investigation (CDM Federal 1994) a two day bird survey was conducted by M. C. Wade (Oak Ridge National Laboratory) and B.A. Beatty (CDM Federal Programs) in May 1995. The subject area of investigation includes the sludge lagoon, Landfill No. 4, and the wetland area east of the landfill and west of Hannah Road (including two ponds). This is known as Area 1. The Area 1 wetlands include bottomland hardwood forest, stream, and pond habitats. The objectives of this survey were to document bird species using the Area I wetlands and to see if the change in hydrology (due to the installation of the Sewage Treatment Plant effluent diversion and stormwater runon control systems) has resulted in changes at Area 1 since the previous survey of May 1992 (CDM Federal 1994).

  12. Automated Solid-Phase Subcloning Based on Beads Brought into Proximity by Magnetic Force

    DEFF Research Database (Denmark)

    Hudson, Elton P.; Nikoshkov, Andrej; Uhlén, Mathias

    2012-01-01

    contact by application of a magnet during the ligation step. An automated procedure was developed using a laboratory workstation to transfer genes into various expression vectors and more than 95% correct clones were obtained in a number of various applications. The method presented here is suitable...... and the gene are immobilized to separate paramagnetic beads and brought into proximity by magnetic force. Ligation events were directly evaluated using fluorescent-based microscopy and flow cytometry. The highest ligation efficiencies were obtained when gene- and vector-coated beads were brought into close...... for efficient subcloning in an automated manner to rapidly generate a large number of gene constructs in various vectors intended for high throughput applications....

  13. Fine Tuning of Basic Forces through the Existence of Carbon-Based Life

    CERN Multimedia

    CERN. Geneva

    2001-01-01

    The bulk of the carbon in our universe is produced in the triple-alpha process in helium-burning red giant stars. We calculated the change of the triple-alpha reaction rate in a microscopic twelve-nucleon model of the 12C nucleus and looked for the effects of minimal variations of the strengths of the underlying strong and Coulomb interactions. Stellar model calculations are performed using the alternative reaction rates. We show that outside a narrow window of 0.5% of the strength or range of the strong interaction the stellar production of carbon or oxygen is reduced by factors of 130 to 1000. Therefore, outside this window the existence of carbon-based life in our universe would be strongly disfavored. These anthropically allowed strengths of the strong and electromagnetic forces also constrain the sum of the light quark masses and the Higgs vacuum expectation value.

  14. Atomic Force Microscopy-based Advanced Characterization of Piezoelectric, Flexoelectric, Electric, and Topographic Properties

    Science.gov (United States)

    Geng, Dalong

    This thesis reports a novel characterization of the piezoelectric and flexoelectric effects of bent nanowires/microwires (NWs/MWs) using Atomic Force Microscopy (AFM) or AFM-based techniques. 3D Kelvin probe microscopy (3DKPM) under a biased condition can effectively quantify piezopotential of relatively large strained microstructures in static cases. AFM-thin film transistor (AFM-TFT) design was proposed to measure the piezoelectric and flexoelectric potential on small NWs either statically or dynamically. Also, topographic and electrical properties of different nanomaterials were measured with AFM. In future, more quantitative AFM-TFT experiments could be conducted on barium titanate (BTO) NWs under different strains to quantify the flexoelectricity in the nanometer scale.

  15. Factors which influence on force of boxers` and footballers` shots on the stage of base pre-treatment

    Directory of Open Access Journals (Sweden)

    Nikitenko S.A.

    2011-02-01

    Full Text Available On the stage of base pre-treatment factors which influence on force of shots the hands of boxers and feet of footballers as a criterion of competition activity efficiency are certain. Connections are certain between force of shots by hands and feet. The objective test of the specialized sense determination of boxers` and footballers` shots is offered. It is recommended to develop maximal and explosive force of all parts of sportsman body at implementation preparatory exercises with the further transfer of physical qualities on implementation of the special exercises.

  16. Environmental Assessment Report for the Proposed Santa Rosa County Reclaimed Water Rapid-rate Infiltration Basin (RIB) System at Eglin Air Force Base, Florida

    Science.gov (United States)

    2005-02-01

    bedrock occurs at a depth of approximately 400 ft. 2 Overlaying this bedrock is material that comprises the Citronelle Formation. This formation 3 is...in the surficial aquifer 36 system within the Citronelle Formation. The depth to groundwater ranges from just a few 37 feet in low-lying areas to

  17. Environmental Assessment, Search and Rescue Training, HH-60 and HC-130, 920th Rescue Group, 301st and 39th Rescue Squadrons, Patrick Air Force Base, Florida

    Science.gov (United States)

    2003-10-01

    kempii). Journal of Herpetology 29: 370-374. Ross, J.P. 1979. Historical decline of loggerhead, ridley, and leatherback sea turtles, pp. 189- 195...Feeding ecology of wild and head-started Kemp’s ridley sea turtles in south Texas waters. Journal of Herpetology . Vol. 23. 1991. Shaver, D.J. 1994...Relative abundance, temporal patterns, and growth of sea turtles at the Mansfield Channel, Texas. Journal of Herpetology 28: 491-497. Shoop, C.R. and

  18. Environmental Assessment for the Replacement of the JP-8 Transfer Pipeline between the 6000 Area and 400 Area at Tyndall Air Force Base Bay County, Florida

    Science.gov (United States)

    2012-09-01

    underlain by the Intracoastal Formation, which is primarily composed of fossils, quartz sand, and calcium carbonate grains cemented by crystalline...Brazilian pepper) across 28 acres of forested land ($70,000); and eradicated grape vine across 40 acres of forested community ($7,500). Patrick AFB, FL

  19. Proceedings of the Biennial EO/EEO Research Symposium (5th) Held at Patrick Air Force Base, Florida on February 17-18, 2005

    Science.gov (United States)

    2005-02-01

    groups for marriage than other racial groups. Although interracial marriages are more common than in previous years (U.S. Bureau of the Census...Distance Studies: A New National Survey 9 Vincent Parrillo Evaluating the Effectiveness of Diversity: What the Military Can Learn 26 From...Military Equal Opportunity Training Program Impacts 168 Operational Readiness and Effectiveness : An Exploratory Study James Camic EO Issues: EO

  20. Fire, herbicide, and chainsaw felling effects on arthropods in fire-suppressed longleaf pine sandhills at Eglin Air Force Base, Florida

    Science.gov (United States)

    Louis Provencher; Krista E. M. Galley; Andrea R. Litt; Doria R. Gordon; Leonard A. Brennan; George W. Tanner; Jeffrey L. Hardesty

    2002-01-01

    Experimentally evaluating the success of hardwood reduction techniques against a "model" reference condition of longleaf pine sandhill communities is not directly possible because reference sites are not randomized or replicated. We addressed this issue by measuring the similarity of arthropods in treatment (fire, herbicide, felling/girdling, and control) and...

  1. Finding of No Significant Impact/Finding of No Practicable Alternative: Environmental Assessment of the Privatization of Military Family Housing at MacDill Air Force Base, Florida

    Science.gov (United States)

    2007-10-09

    Atlantic; Stone Crab Fishery of the Gulf of Mexico; Spiny Lobster in the Gulf of Mexico and South Atlantic; Coral and Coral Reefs of the Gulf of Mexico...Numbon; (813): Admin. 627-2620 Waste 627-2640 Legal 627-2Wl Wetlands 627-2630 Water 627-2670 ERM 627-2650 Air 627-2660 Lab 272-5157 RECEIVED SEP 1

  2. Environmental Assessment. Construction and Maintenance of Wastewater Pipelines and Lift Stations and Installation of Fiber Optic Conduit at Eglin Air Force Base, Florida

    Science.gov (United States)

    2012-06-01

    canadensis), Maryland goldenaster (Chrysopsis mariana), and scratch daisy ( Haplopappus divaricata). There were seedling trees and shrubs within the ROW...Solidago canadensis), Maryland goldenaster (Chrysopsis mariana), and scratch daisy ( Haplopappus divaricata). There were seedling trees and shrubs... Haplopappus  divaricatus  Scratch Daisy  Open Pine Woods And  Maintained ROW  X  X  X  Helenium amarum  Sneezeweed  Open Pine Woods And  Maintained ROW

  3. Objective Assessment of Laparoscopic Force and Psychomotor Skills in a Novel Virtual Reality-Based Haptic Simulator.

    Science.gov (United States)

    Prasad, M S Raghu; Manivannan, Muniyandi; Manoharan, Govindan; Chandramohan, S M

    2016-01-01

    Most of the commercially available virtual reality-based laparoscopic simulators do not effectively evaluate combined psychomotor and force-based laparoscopic skills. Consequently, the lack of training on these critical skills leads to intraoperative errors. To assess the effectiveness of the novel virtual reality-based simulator, this study analyzed the combined psychomotor (i.e., motion or movement) and force skills of residents and expert surgeons. The study also examined the effectiveness of real-time visual force feedback and tool motion during training. Bimanual fundamental (i.e., probing, pulling, sweeping, grasping, and twisting) and complex tasks (i.e., tissue dissection) were evaluated. In both tasks, visual feedback on applied force and tool motion were provided. The skills of the participants while performing the early tasks were assessed with and without visual feedback. Participants performed 5 repetitions of fundamental and complex tasks. Reaction force and instrument acceleration were used as metrics. Surgical Gastroenterology, Government Stanley Medical College and Hospital; Institute of Surgical Gastroenterology, Madras Medical College and Rajiv Gandhi Government General Hospital. Residents (N = 25; postgraduates and surgeons with 4 and ≤10 years of laparoscopic surgery). Residents applied large forces compared with expert surgeons and performed abrupt tool movements (p < 0.001). However, visual + haptic feedback improved the performance of residents (p < 0.001). In complex tasks, visual + haptic feedback did not influence the applied force of expert surgeons, but influenced their tool motion (p < 0.001). Furthermore, in complex tissue sweeping task, expert surgeons applied more force, but were within the tissue damage limits. In both groups, exertion of large forces and abrupt tool motion were observed during grasping, probing or pulling, and tissue sweeping maneuvers (p < 0.001). Modern day curriculum-based training should evaluate the skills

  4. Internet-based Modeling, Mapping, and Analysis for the Greater Everglades (IMMAGE; Version 1.0): web-based tools to assess the impact of sea level rise in south Florida

    Science.gov (United States)

    Hearn, Paul; Strong, David; Swain, Eric; Decker, Jeremy

    2013-01-01

    South Florida's Greater Everglades area is particularly vulnerable to sea level rise, due to its rich endowment of animal and plant species and its heavily populated urban areas along the coast. Rising sea levels are expected to have substantial impacts on inland flooding, the depth and extent of surge from coastal storms, the degradation of water supplies by saltwater intrusion, and the integrity of plant and animal habitats. Planners and managers responsible for mitigating these impacts require advanced tools to help them more effectively identify areas at risk. The U.S. Geological Survey's (USGS) Internet-based Modeling, Mapping, and Analysis for the Greater Everglades (IMMAGE) Web site has been developed to address these needs by providing more convenient access to projections from models that forecast the effects of sea level rise on surface water and groundwater, the extent of surge and resulting economic losses from coastal storms, and the distribution of habitats. IMMAGE not only provides an advanced geographic information system (GIS) interface to support decision making, but also includes topic-based modules that explain and illustrate key concepts for nontechnical users. The purpose of this report is to familiarize both technical and nontechnical users with the IMMAGE Web site and its various applications.

  5. Physical Layer Network Coding Based on Integer Forcing Precoded Compute and Forward

    Directory of Open Access Journals (Sweden)

    M. A. Vázquez-Castro

    2013-08-01

    Full Text Available In this paper, we address the implementation of physical layer network coding (PNC based on compute and forward (CF in relay networks. It is known that the maximum achievable rates in CF-based transmission is limited due to the channel approximations at the relay. In this work, we propose the integer forcing precoder (IFP, which bypasses this maximum rate achievability limitation. Our precoder requires channel state information (CSI at the transmitter, but only that of the channel between the transmitter and the relay, which is a feasible assumption. The overall contributions of this paper are three-fold. Firstly, we propose an implementation of CF using IFP and prove that this implementation achieves higher rates as compared to traditional relaying schemes. Further, the probability of error from the proposed scheme is shown to have up to 2 dB of gain over the existent lattice network coding-based implementation of CF. Secondly, we analyze the two phases of transmission in the CF scheme, thereby characterizing the end-to-end behavior of the CF and not only one-phase behavior, as in previous proposals. Finally, we develop decoders for both the relay and the destination. We use a generalization of Bezout’s theorem to justify the construction of these decoders. Further, we make an analytical derivation of the end-to-end probability of error for cubic lattices using the proposed scheme.

  6. Force Sensor Based Tool Condition Monitoring Using a Heterogeneous Ensemble Learning Model

    Directory of Open Access Journals (Sweden)

    Guofeng Wang

    2014-11-01

    Full Text Available Tool condition monitoring (TCM plays an important role in improving machining efficiency and guaranteeing workpiece quality. In order to realize reliable recognition of the tool condition, a robust classifier needs to be constructed to depict the relationship between tool wear states and sensory information. However, because of the complexity of the machining process and the uncertainty of the tool wear evolution, it is hard for a single classifier to fit all the collected samples without sacrificing generalization ability. In this paper, heterogeneous ensemble learning is proposed to realize tool condition monitoring in which the support vector machine (SVM, hidden Markov model (HMM and radius basis function (RBF are selected as base classifiers and a stacking ensemble strategy is further used to reflect the relationship between the outputs of these base classifiers and tool wear states. Based on the heterogeneous ensemble learning classifier, an online monitoring system is constructed in which the harmonic features are extracted from force signals and a minimal redundancy and maximal relevance (mRMR algorithm is utilized to select the most prominent features. To verify the effectiveness of the proposed method, a titanium alloy milling experiment was carried out and samples with different tool wear states were collected to build the proposed heterogeneous ensemble learning classifier. Moreover, the homogeneous ensemble learning model and majority voting strategy are also adopted to make a comparison. The analysis and comparison results show that the proposed heterogeneous ensemble learning classifier performs better in both classification accuracy and stability.

  7. Soil erosion and causative factors at Vandenberg Air Force Base, California

    Science.gov (United States)

    Butterworth, Joel B.

    1988-01-01

    Areas of significant soil erosion and unvegetated road cuts were identified and mapped for Vandenberg Air Force Base. One hundred forty-two eroded areas (most greater than 1.2 ha) and 51 road cuts were identified from recent color infrared aerial photography and ground truthed to determine the severity and causes of erosion. Comparison of the present eroded condition of soils (as shown in the 1986 photography) with that in historical aerial photography indicates that most erosion on the base took place prior to 1928. However, at several sites accelerated rates of erosion and sedimentation may be occurring as soils and parent materials are eroded vertically. The most conspicuous erosion is in the northern part of the base, where severe gully, sheet, and mass movement erosion have occurred in soils and in various sedimentary rocks. Past cultivation practices, compounded by highly erodible soils prone to subsurface piping, are probably the main causes. Improper range management practices following cultivation may have also increased runoff and erosion. Aerial photography from 1986 shows that no appreciable headward erosion or gully sidewall collapse have occurred in this area since 1928.

  8. United States Air Force F-35A Operational Basing Environmental Impact Statement. Volume 2, Appendices

    Science.gov (United States)

    2013-09-01

    preceding IICEP Letter  Big Cypress Indian  The Seminole Tribe of Florida  6300  Stirling  Road  Hollywood, FL 33024...Railroad, rapid rail transit, and street railroad transportation Y Y1 Y3 Y4 42 Motor vehicle transportation Y Y2 Y3 Y4 43 Aircraft transportation Y Y2 Y3...C-63 Cantrell, R.W. 1974. Prolonged Exposure to Intermittent Noise: Audiometric, Biochemical, Motor , Psychological, and Sleep Effects

  9. Installation Restoration Program Records Search for Holloman Air Force Base, New Mexico

    Science.gov (United States)

    1983-08-01

    N.W. llth Place Gainesville, Florida B [ [August 1983 Contract No. F08637-80-GO010-0019 [ I DISTRIBUTION STATEMrNT A Approved for public rel" eau .-I...the ground water in this area is naturally high in total dissolved solids (>10,000 mg/l) and therefore is not usable as a potable water supply. 4...discussions). IV - 30 8. Available Water Quality Data Potable water for Holloman AFB is obtained from two sources: surface water from Bonita Lake, and

  10. The influence of foot geometry on the calcaneal osteotomy angle based on two-dimensional static force analyses.

    Science.gov (United States)

    Reilingh, M L; Tuijthof, G J M; van Dijk, C N; Blankevoort, L

    2011-11-01

    Malalignment of the hindfoot can be corrected with a calcaneal osteotomy (CO). A well-selected osteotomy angle in the sagittal plane will reduce the shear force in the osteotomy plane while walking. The purpose was to determine the presence of a relationship between the foot geometry and loading of the calcaneus, which influences the choice of the preferred CO angle. A static free body force analysis was made of the posterior calcaneal fragment in the second half of the stance phase to determine the main loads: the plantar apeunorosis (PA) and Achilles tendon (AT). The third load is on the osteotomy surface which should be oriented such that the shear component of the force is zero. The force direction of the PA and AT was measured on 58 MRIs of the foot, and the force ratio between both structures was taken from the literature. In addition the PA-to-AT force ratio was estimated for different foot geometries to identify the relationship. Based on the wish to minimize the shear force during walking, a mean CO angle was determined to be 33° (SD8) relative to the foot sole. In pes planus foot geometry, the angle should be higher than the mean. In pes cavus foot geometry, the angle should be smaller. Foot geometry, in particular the relative foot heights is a determinant for the individual angle in performing the sliding calcaneal osteotomy. It is recommended to take into account the foot geometry (arch) when deciding on the CO angle for hindfoot correction.

  11. Vandenberg Air Force Base integrated resource assessment. Volume 2, Baseline detail

    Energy Technology Data Exchange (ETDEWEB)

    Halverson, M.A.; Richman, E.E.; Dagle, J.E.; Hickman, B.J.; Daellenbach, K.K.; Sullivan, G.P.

    1993-06-01

    The US Air Force Space Command has tasked the Pacific Northwest Laboratory, as the lead laboratory supporting the US Department of Energy Federal Energy Management Program, to identify, evaluate, and assist in acquiring all cost-effective energy projects at Vandenberg Air Force Base (VAFB). This is a model program PNL is designing for federal customers served by the Pacific Gas and Electric Company (PG and E). The primary goal of the VAFB project is to identify all electric energy efficiency opportunities, and to negotiate with PG and E to acquire those resources through a customized demand-side management program for its federal clients. That customized program should have three major characteristics: (1) 100% up-front financing; (2) substantial utility cost-sharing; and (3) utility implementation through energy service companies under contract to the utility. A similar arrangement will be pursued with Southern California Gas for non-electric resource opportunities if that is deemed desirable by the site and if the gas utility seems open to such an approach. This report documents the assessment of baseline energy use at VAFB located near Lompoc, California. It is a companion report to Volume 1, Executive Summary, and Volume 3, Resource Assessment. This analysis examines the characteristics of electric, natural gas, fuel oil, and propane use for fiscal year 1991. It records energy-use intensities for the facilities at VAFB by building type and energy end use. It also breaks down building energy consumption by fuel type, energy end use, and building type. A more complete energy consumption reconciliation is presented that includes the accounting of all energy use among buildings, utilities, and applicable losses.

  12. Griffiss Air Force Base integrated resource assessment. Volume 3, Electric resource assessment

    Energy Technology Data Exchange (ETDEWEB)

    Armstrong, P.R.; Shankle, S.A.; Elliott, D.B.; Stucky, D.J.; Keller, J.M.; Wahlstrom, R.R.; Dagle, J.E.; Gu, A.Y.

    1993-09-01

    The US Air Force Air Combat Command (ACC) has tasked the US Department of Energy (DOE) Federal Energy Management Program (FEMP) to identify, evaluate, and assist in acquiring all cost-effective energy projects at Griffiss Air Force Base (AFB). FEMP, with support from the Pacific Northwest Laboratory (PNL), is designing this model program for federal customers served by the Niagara Mohawk Power Company. The program with Griffiss AFB will (1) identify and evaluate all cost-effective electric energy projects; (2) develop a schedule for project acquisition considering project type, size, timing, capital requirements, as well as energy and dollar savings; and (3) secure 100% of the financing required to implement electric energy efficiency projects from Niagara Mohawk and have them procure the necessary contractors to perform detailed audits and install the technologies. This report provides the results of the electric energy resource opportunity (ERO) assessments performed by PNL at one of Niagara Mohawk`s primary federal facilities, the ACC Griffiss AFB facility located near Rome, New York. The results of the analyses of EROs are presented in seven common energy end-use categories. A narrative description of each ERO provides information on the initial cost, energy and dollar savings; impacts on operations and maintenance (O&M); and, when applicable, a discussion of energy supply and demand, energy security, and environmental issues. The evaluation methodology and technical and cost assumptions are also described for each ERO. Summary tables present the operational performance of energy end-use equipment before and after the implementation of each ERO and the results of the life-cycle cost analysis indicating the net present value (NPV) and savings-to-investment ratio (SIR) of each ERO.

  13. The force analysis for superparamagnetic nanoparticles-based gene delivery in an oscillating magnetic field

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Jiajia [State Key Laboratory of Electrical Insulation and Power Equipment, Xi’an Jiaotong University, No. 28 Xianning West Road, Xi’an, Shaanxi Province 710049 (China); Shi, Zongqian, E-mail: zqshi@mail.xjtu.edu.cn [State Key Laboratory of Electrical Insulation and Power Equipment, Xi’an Jiaotong University, No. 28 Xianning West Road, Xi’an, Shaanxi Province 710049 (China); Jia, Shenli [State Key Laboratory of Electrical Insulation and Power Equipment, Xi’an Jiaotong University, No. 28 Xianning West Road, Xi’an, Shaanxi Province 710049 (China); Zhang, Pengbo [Department of Anesthesiology, Second Affiliated Hospital of Xi’an Jiaotong University School of Medicine, No.157 West 5 Road, Xi’an, Shaanxi Province 710004 (China)

    2017-04-01

    Due to the peculiar magnetic properties and the ability to function in cell-level biological interaction, superparamagnetic nanoparticles (SMNP) have been being the attractive carrier for gene delivery. The superparamagnetic nanoparticles with surface-bound gene vector can be attracted to the surface of cells by the Kelvin force provided by external magnetic field. In this article, the influence of the oscillating magnetic field on the characteristics of magnetofection is studied in terms of the magnetophoretic velocity. The magnetic field of a cylindrical permanent magnet is calculated by equivalent current source (ECS) method, and the Kelvin force is derived by using the effective moment method. The results show that the static magnetic field accelerates the sedimentation of the particles, and drives the particles inward towards the axis of the magnet. Based on the investigation of the magnetophoretic velocity of the particle under horizontally oscillating magnetic field, an oscillating velocity within the amplitude of the magnet oscillation is observed. Furthermore, simulation results indicate that the oscillating amplitude plays an important role in regulating the active region, where the particles may present oscillating motion. The analysis of the magnetophoretic velocity gives us an insight into the physical mechanism of the magnetofection. It's also helpful to the optimal design of the magnetofection system. - Highlights: • We compare the results of the ECS method and FEA method with the commercial software, Ansys. • We analyze the physic mechanism of the oscillating motion of the particles in the presence of an oscillating magnet. • We discuss the influence of the oscillating amplitude of the magnet on the behavior of the particle.

  14. Vandenberg Air Force Base integrated resource assessment. Volume 3, Resource assessment

    Energy Technology Data Exchange (ETDEWEB)

    Daellenbach, K.K.; Dagle, J.E.; Dittmer, A.L.; Elliott, D.B.; Halverson, M.A.; Hickman, B.J.; Parker, G.B.; Richman, E.E.; Shankle, S.A.

    1993-06-01

    The US Air Force Space Command (SPACECOM) has tasked the Pacific Northwest Laboratory (PNL), as the lead laboratory supporting the US Department of Energy (DOE) Federal Energy Management Program (FEMP), to identify, evaluate, and assist in acquiring all cost-effective energy projects at Vandenberg Air Force Base (VAFB). This is part of a model program that PNL is designing to support energy-use decisions in the federal sector. This report provides the results of the fossil fuel and electric energy resource opportunity (ERO) assessments performed by PNL at the SPACECOM VAFB facility located approximately 50 miles northwest of Santa Barbara, California. It is a companion report to Volume 1, Executive Summary, and Volume 2, Baseline Detail. The results of the analysis of EROs are presented in ten common energy end-use categories (e.g., boilers and furnaces, service hot water, and building lighting). In addition, a case study of process loads at Space Launch Complex-4 (SLC-4) is included. A narrative description of each ERO is provided, including information on the installed cost, energy and dollar savings; impacts on operation and maintenance (O and M); and, when applicable, a discussion of energy supply and demand, energy security, and environmental issues. A description of the evaluation methodologies and technical and cost assumptions is also provided for each ERO. Summary tables present the cost-effectiveness of energy end-use equipment before and after the implementation of each ERO and present the results of the life-cycle cost (LCC) analysis indicating the net present value (NPV) and value index (VI) of each ERO. Finally, an appendix includes a summary of an economic analysis case study of the South Vandenberg Power Plant (SVPP) operating scenarios.

  15. A modal approach based on perfectly matched layers for the forced response of elastic open waveguides

    Science.gov (United States)

    Gallezot, M.; Treyssède, F.; Laguerre, L.

    2018-03-01

    This paper investigates the computation of the forced response of elastic open waveguides with a numerical modal approach based on perfectly matched layers (PML). With a PML of infinite thickness, the solution can theoretically be expanded as a discrete sum of trapped modes, a discrete sum of leaky modes and a continuous sum of radiation modes related to the PML branch cuts. Yet with numerical methods (e.g. finite elements), the waveguide cross-section is discretized and the PML must be truncated to a finite thickness. This truncation transforms the continuous sum into a discrete set of PML modes. To guarantee the uniqueness of the numerical solution of the forced response problem, an orthogonality relationship is proposed. This relationship is applicable to any type of modes (trapped, leaky and PML modes) and hence allows the numerical solution to be expanded on a discrete sum in a convenient manner. This also leads to an expression for the modal excitability valid for leaky modes. The physical relevance of each type of mode for the solution is clarified through two numerical test cases, a homogeneous medium and a circular bar waveguide example, excited by a point source. The former is favourably compared to a transient analytical solution, showing that PML modes reassemble the bulk wave contribution in a homogeneous medium. The latter shows that the PML mode contribution yields the long-term diffraction phenomenon whereas the leaky mode contribution prevails closer to the source. The leaky mode contribution is shown to remain accurate even with a relatively small PML thickness, hence reducing the computational cost. This is of particular interest for solving three-dimensional waveguide problems, involving two-dimensional cross-sections of arbitrary shapes. Such a problem is handled in a third numerical example by considering a buried square bar.

  16. Validation of a new whole-body cryotherapy chamber based on forced convection.

    Science.gov (United States)

    Bouzigon, Romain; Arfaoui, Ahlem; Grappe, Frédéric; Ravier, Gilles; Jarlot, Benoit; Dugue, Benoit

    2017-04-01

    Whole-body cryotherapy (WBC) and partial-body cryotherapy (PBC) are two methods of cold exposure (from -110 to -195°C according to the manufacturers). However, temperature measurement in the cold chamber during a PBC exposure revealed temperatures ranging from -25 to -50°C next to the skin of the subjects (using isolating layer placed between the sensor and the skin). This discrepancy is due to the human body heat transfer. Moreover, on the surface of the body, an air layer called the boundary layer is created during the exposure and limits heat transfer from the body to the cabin air. Incorporating forced convection in a chamber with a participant inside could reduce this boundary layer. The aim of this study was to explore the use of a new WBC technology based on forced convection (frontal unilateral wind) through the measurement of skin temperature. Fifteen individuals performed a 3-min WBC exposure at -40°C with an average wind speed of 2.3ms -1 . The subjects wore a headband, a surgical mask, underwear, gloves and slippers. The skin temperature of the participants was measured with a thermal camera just before exposure, just after exposure and at 1, 3, 5, 10, 15 and 20min after exposure. Mean skin temperature significantly dropped by 11°C just after exposure (pcryosauna devices with reported exposures between -140°C and -160°C and those in two other WBC devices with reported exposures between -60°C and -110°C. The use of this new technology provides the ability to reach decreases in skin temperature similar to other technologies. The new chamber is suitable and relevant for use as a WBC device. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. The force analysis for superparamagnetic nanoparticles-based gene delivery in an oscillating magnetic field

    International Nuclear Information System (INIS)

    Sun, Jiajia; Shi, Zongqian; Jia, Shenli; Zhang, Pengbo

    2017-01-01

    Due to the peculiar magnetic properties and the ability to function in cell-level biological interaction, superparamagnetic nanoparticles (SMNP) have been being the attractive carrier for gene delivery. The superparamagnetic nanoparticles with surface-bound gene vector can be attracted to the surface of cells by the Kelvin force provided by external magnetic field. In this article, the influence of the oscillating magnetic field on the characteristics of magnetofection is studied in terms of the magnetophoretic velocity. The magnetic field of a cylindrical permanent magnet is calculated by equivalent current source (ECS) method, and the Kelvin force is derived by using the effective moment method. The results show that the static magnetic field accelerates the sedimentation of the particles, and drives the particles inward towards the axis of the magnet. Based on the investigation of the magnetophoretic velocity of the particle under horizontally oscillating magnetic field, an oscillating velocity within the amplitude of the magnet oscillation is observed. Furthermore, simulation results indicate that the oscillating amplitude plays an important role in regulating the active region, where the particles may present oscillating motion. The analysis of the magnetophoretic velocity gives us an insight into the physical mechanism of the magnetofection. It's also helpful to the optimal design of the magnetofection system. - Highlights: • We compare the results of the ECS method and FEA method with the commercial software, Ansys. • We analyze the physic mechanism of the oscillating motion of the particles in the presence of an oscillating magnet. • We discuss the influence of the oscillating amplitude of the magnet on the behavior of the particle.

  18. A dynamic force balance model for colloidal expansion and its DLVO-based application.

    Science.gov (United States)

    Liu, Longcheng; Moreno, Luis; Neretnieks, Ivars

    2009-01-20

    A force balance model that describes the dynamic expansion of colloidal bentonite gels/sols is presented. The colloidal particles are assumed to consist of one or several thin sheets with the other dimensions much larger than their thickness. The forces considered include van der Waals force, diffuse double layer force, thermal force giving rise to Brownian motion, gravity, as well as friction force. The model results in an expression resembling the instationary diffusion equation but with an immensely variable diffusivity. This diffusivity is strongly influenced by the concentration of counterions as well as by the particle concentration in the colloid gel/sol. The properties of the model are explored and discussed, exemplified by the upward expansion of an originally highly compacted bentonite tablet in a test tube. Examples are presented for a number of cases with ionic concentrations varying between very dilute waters up to several molar of counterions. The volume fraction of particles ranges from 40% to very dilute sols.

  19. Demonstration of Security Benefits of Renewable Generation at FE Warren Air Force Base

    International Nuclear Information System (INIS)

    Warwick, William M.; Myers, Kurt; Seifert, Gary

    2010-01-01

    Report detailing field demonstration of security benefits of renewable generation at FE Warren Air Force Base. The 2006 National Defense Appropriations Act directed the Department of Defense (DOD) to coordinate the testing of a wind turbine (new to the U.S. market) at an Air Force installation as a follow on to analyses conducted by the Pacific Northwest National Laborabory (PNNL) as part of the 2005 DOD Renewable Assessment. The earlier study simulated the performance of renewable power produced from wind turbines, solar photovoltaics and geothermal energy as part of a Base-wide energy security solution. The simulation concluded that integration of renewable generating resources with emergency generators, typically diesel-fired, could significantly enhance energy security and extend power supplies during prolonged commercial grid power outages. A simulation is insufficient to convince skeptics of the reliability of renewable resources, especially those that produce power only intermittently, like wind and solar. Therefore, Congress requested a field demonstration be performed using a wind turbine because wind power is the most erratic of all renewable resources. Following this direction, the Air Force identified a site for the wind turbine demonstration and contracted with the Idaho National Laboratory (INL) and PNNL to conduct the demonstration and implement other provisions in the appropriation bill. INL identified a wind turbine that met the legislative requirements (the Gamesa G-80), and with the support of PNNL and the Air Force, selected FE Warren Air Force Base for the demonstration. FE Warren has an excellent wind resource and was already a host to two wind turbines and could accommodate a third. The G-80 is rated at 2 MWs versus the two existing 660 kW turbines, consequently wind production would more than double. Procurement, siting, and acceptance testing of the new turbine was completed in early 2010. The field test was conducted in late April 2010

  20. Competency-Based Assignment & Promotion to Meet Air Force Senior Leader Requirements

    National Research Council Canada - National Science Library

    Steele, Jr., Robert G; Fletcher, Kelly E; Nadoiski, William F; Buckman, Emily A; Oliver, Jr., Stephen W

    2006-01-01

    .... The third component, competencies, are occupational skill sets and enduring leadership competencies Air Force leaders develop as they progress along the tactical, operational and strategic levels...

  1. Measurement model and calibration experiment of over-constrained parallel six-dimensional force sensor based on stiffness characteristics analysis

    International Nuclear Information System (INIS)

    Niu, Zhi; Zhao, Yanzhi; Zhao, Tieshi; Cao, Yachao; Liu, Menghua

    2017-01-01

    An over-constrained, parallel six-dimensional force sensor has various advantages, including its ability to bear heavy loads and provide redundant force measurement information. These advantages render the sensor valuable in important applications in the field of aerospace (space docking tests, etc). The stiffness of each component in the over-constrained structure has a considerable influence on the internal force distribution of the structure. Thus, the measurement model changes when the measurement branches of the sensor are under tensile or compressive force. This study establishes a general measurement model for an over-constrained parallel six-dimensional force sensor considering the different branch tensions and compression stiffness values. Numerical calculations and analyses are performed using practical examples. Based on the parallel mechanism, an over-constrained, orthogonal structure is proposed for a six-dimensional force sensor. Hence, a prototype is designed and developed, and a calibration experiment is conducted. The measurement accuracy of the sensor is improved based on the measurement model under different branch tensions and compression stiffness values. Moreover, the largest class I error is reduced from 5.81 to 2.23% full scale (FS), and the largest class II error is reduced from 3.425 to 1.871% FS. (paper)

  2. Fabrication of four-point biped robot foot module based on contact-resistance force sensor and its evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, Hyun Joon; Kim, Jong Ho; Kim, Dong Ki [Korea Research Institute of Standards and Science, Daejeon (Korea, Republic of); Kwon, Young Ha [Kyung Hee University, Yongin (Korea, Republic of)

    2011-02-15

    This paper presents the design of robot foot module of four-point biped walking robot and its fabrication. The foot module has four sensor units based on contact-resistance force sensor. The thin-film-type force sensor is fabricated by coating resistive ink on thin polyimide film using silk screening technique. The simple structure is devised and fabricated to assemble the thin force sensor rigidly. The unit force sensor module is evaluated by the calibration setup to obtain the characteristics of repeatability and hysteresis. The sensor module presents hysteresis error of about 5% and repeatability error of about 0.37%. The calculated zero moment point (ZMP) of the foot module is also compared with the measured position using static load of 50 N. The maximum location error of ZMP is less than 10%. The robot foot module shows the possibility of applying it to humanoid walking.

  3. Fabrication of four-point biped robot foot module based on contact-resistance force sensor and its evaluation

    International Nuclear Information System (INIS)

    Kwon, Hyun Joon; Kim, Jong Ho; Kim, Dong Ki; Kwon, Young Ha

    2011-01-01

    This paper presents the design of robot foot module of four-point biped walking robot and its fabrication. The foot module has four sensor units based on contact-resistance force sensor. The thin-film-type force sensor is fabricated by coating resistive ink on thin polyimide film using silk screening technique. The simple structure is devised and fabricated to assemble the thin force sensor rigidly. The unit force sensor module is evaluated by the calibration setup to obtain the characteristics of repeatability and hysteresis. The sensor module presents hysteresis error of about 5% and repeatability error of about 0.37%. The calculated zero moment point (ZMP) of the foot module is also compared with the measured position using static load of 50 N. The maximum location error of ZMP is less than 10%. The robot foot module shows the possibility of applying it to humanoid walking

  4. A Compliant Control Method Based on Force Sensors on Robot End-effectors for Live-working

    Directory of Open Access Journals (Sweden)

    Huanbing GAO

    2014-01-01

    Full Text Available This paper proposes a force control method for the live-working robot. Some live- working task requires larger stiffness such as pushing and butting when replacing cross arm or insulator. Two arms are attached on the live-working robot to meet this requirement and other need for cooperation by two arms. The different kinematic structure of this two arms brings many difficulties to get the dynamic model of the total system. This problem is solved by the proposed control scheme, the main idea of which is two arms could be considered as one arm. The force control method for the exact force control is based on the compliant relationship of the dual arms and the environment. The developed control scheme is experimentally tested on the live-working robot, and the experimental investigation concerns it has short computation time and can successfully tracking force.

  5. A novel method of evaluating the lift force on the bluff body based on Noca’s flux equation

    International Nuclear Information System (INIS)

    Sui Xiang-Kun; Jiang Nan

    2015-01-01

    The influence of experimental error on lift force evaluated by Noca’s flux equation is studied based on adding errors into the direct numerical simulation data for flow past cylinder at Re = 100. As Noca suggested using the low-pass filter to get rid of the high-frequency noise in the evaluated lift force, we verify that his method is inapplicable for dealing with the dataset of 1% experimental error, although the precision is acceptable in practice. To overcome this defect, a novel method is proposed in this paper. The average of the lift forces calculated by using multiple control volume is taken as the evaluation before applying the low-pass filter. The method is applied to an experimental data for flow past a cylinder at approximately Re = 900 to verify its validation. The results show that it improves much better on evaluating the lift forces. (paper)

  6. An improved visualization-based force-measurement technique for short-duration hypersonic facilities

    Energy Technology Data Exchange (ETDEWEB)

    Laurence, Stuart J.; Karl, Sebastian [Institute of Aerodynamics and Flow Technology, Spacecraft Section, German Aerospace Center (DLR), Goettingen (Germany)

    2010-06-15

    This article is concerned with describing and exploring the limitations of an improved version of a recently proposed visualization-based technique for the measurement of forces and moments in short-duration hypersonic wind tunnels. The technique is based on tracking the motion of a free-flying body over a sequence of high-speed visualizations; while this idea is not new in itself, the use of high-speed digital cinematography combined with a highly accurate least-squares tracking algorithm allows improved results over what have been previously possible with such techniques. The technique precision is estimated through the analysis of artificially constructed and experimental test images, and the resulting error in acceleration measurements is characterized. For wind-tunnel scale models, position measurements to within a few microns are shown to be readily attainable. Image data from two previous experimental studies in the T5 hypervelocity shock tunnel are then reanalyzed with the improved technique: the uncertainty in the mean drag acceleration is shown to be reduced to the order of the flow unsteadiness, 2-3%, and time-resolved acceleration measurements are also shown to be possible. The response time of the technique for the configurations studied is estimated to be {proportional_to}0.5 ms. Comparisons with computations using the DLR TAU code also yield agreement to within the overall experimental uncertainty. Measurement of the pitching moment for blunt geometries still appears challenging, however. (orig.)

  7. Geochemical study of groundwater at Sandia National Laboratories/New Mexico and Kirtland Air Force Base

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    The U.S. Department of Energy (DOE) Grand Junction Projects Office (GJPO) and its contractor, Rust Geotech, support the Kirtland Area Office by assisting Sandia National Laboratories/New Mexico (Sandia/NM) with remedial action, remedial design, and technical support of its Environmental Restoration Program. To aid in determining groundwater origins and flow paths, the GJPO was tasked to provide interpretation of groundwater geochemical data. The purpose of this investigation was to describe and analyze the groundwater geochemistry of the Sandia/NM Kirtland Air Force Base (KAFB). Interpretations of groundwater origins are made by using these data and the results of {open_quotes}mass balance{close_quotes} and {open_quotes}reaction path{close_quote} modeling. Additional maps and plots were compiled to more fully comprehend the geochemical distributions. A more complete set of these data representations are provided in the appendices. Previous interpretations of groundwater-flow paths that were based on well-head, geologic, and geochemical data are presented in various reports and were used as the basis for developing the models presented in this investigation.

  8. The Five Immune Forces Impacting DNA-Based Cancer Immunotherapeutic Strategy.

    Science.gov (United States)

    Amara, Suneetha; Tiriveedhi, Venkataswarup

    2017-03-17

    DNA-based vaccine strategy is increasingly realized as a viable cancer treatment approach. Strategies to enhance immunogenicity utilizing tumor associated antigens have been investigated in several pre-clinical and clinical studies. The promising outcomes of these studies have suggested that DNA-based vaccines induce potent T-cell effector responses and at the same time cause only minimal side-effects to cancer patients. However, the immune evasive tumor microenvironment is still an important hindrance to a long-term vaccine success. Several options are currently under various stages of study to overcome immune inhibitory effect in tumor microenvironment. Some of these approaches include, but are not limited to, identification of neoantigens, mutanome studies, designing fusion plasmids, vaccine adjuvant modifications, and co-treatment with immune-checkpoint inhibitors. In this review, we follow a Porter's analysis analogy, otherwise commonly used in business models, to analyze various immune-forces that determine the potential success and sustainable positive outcomes following DNA vaccination using non-viral tumor associated antigens in treatment against cancer.

  9. The Five Immune Forces Impacting DNA-Based Cancer Immunotherapeutic Strategy

    Directory of Open Access Journals (Sweden)

    Suneetha Amara

    2017-03-01

    Full Text Available DNA-based vaccine strategy is increasingly realized as a viable cancer treatment approach. Strategies to enhance immunogenicity utilizing tumor associated antigens have been investigated in several pre-clinical and clinical studies. The promising outcomes of these studies have suggested that DNA-based vaccines induce potent T-cell effector responses and at the same time cause only minimal side-effects to cancer patients. However, the immune evasive tumor microenvironment is still an important hindrance to a long-term vaccine success. Several options are currently under various stages of study to overcome immune inhibitory effect in tumor microenvironment. Some of these approaches include, but are not limited to, identification of neoantigens, mutanome studies, designing fusion plasmids, vaccine adjuvant modifications, and co-treatment with immune-checkpoint inhibitors. In this review, we follow a Porter’s analysis analogy, otherwise commonly used in business models, to analyze various immune-forces that determine the potential success and sustainable positive outcomes following DNA vaccination using non-viral tumor associated antigens in treatment against cancer.

  10. Optimization of Contact Force and Pull-in Voltage for Series based MEMS Switch

    Directory of Open Access Journals (Sweden)

    Abhijeet KSHIRSAGAR

    2010-04-01

    Full Text Available Cantilever based metal-to-metal contact type MEMS series switch has many applications namely in RF MEMS, Power MEMS etc. A typical MEMS switch consists of a cantilever as actuating element to make the contact between the two metal terminals of the switch. The cantilever is pulled down by applying a pull-in voltage to the control electrode that is located below the middle portion of the cantilever while only the tip portion of the cantilever makes contact between the two terminals. Detailed analysis of bending of the cantilever for different pull-in voltages reveals some interesting facts. At low pull-in voltage the cantilever tip barely touches the two terminals, thus resulting in very less contact area. To increase contact area a very high pull-in voltage is applied, but it lifts the tip from the free end due to concave curving of the cantilever in the middle region of the cantilever where the electrode is located. Again it results in less contact area. Furthermore, the high pull-in voltage produces large stress at the base of the cantilever close to the anchor. Therefore, an optimum, pull-in voltage must exist at which the concave curving is eliminated and contact area is maximum. In this paper authors report the finding of optimum contact force and pull-in voltage.

  11. (Environmental investigation of ground water contamination at Wright-Patterson Air Force Base, Ohio)

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    An environmental investigation of ground water conditions has been undertaken at Wright-Patterson Air Force Base (WPAFB), Ohio to obtain data to assist in the evaluation of a potential removal action to prevent, to the extent practicable, migration of the contaminated ground water across Base boundaries. Field investigations were limited to the central section of the southwestern boundary of Area C and the Springfield Pike boundary of Area B. Further, the study was limited to a maximum depth of 150 feet below grade. Three primary activities of the field investigation were: (1) installation of 22 monitoring wells, (2) collection and analysis of ground water from 71 locations, (3) measurement of ground water elevations at 69 locations. Volatile organic compounds including trichloroethylene, perchloroethylene, and/or vinyl chloride were detected in concentrations exceeding Maximum Contaminant Levels (MCL) at three locations within the Area C investigation area. Ground water at the Springfield Pike boundary of Area B occurs in two primary units, separated by a thicker-than-expected clay layers. One well within Area B was determined to exceed the MCL for trichloroethylene.

  12. System robustness analysis for drought risk management in South Florida

    Science.gov (United States)

    Eilander, D.; Bouwer, L.; Barnes, J.; Mens, M.; Obeysekera, J.

    2015-12-01

    Drought is a frequently returning natural hazard in Florida, with at least one severe drought to be expected every decade. These droughts have had many impacts such as loss of agricultural products, inadequate public water supply and salt water intrusion into freshwater aquifers. Furthermore, climate change projections for South Florida suggest that dry spells are likely to be more frequent and prolonged, with negative impacts on water supply management for all users. In this study a System Robustness Analysis was conducted in order to analyse the effectiveness of strategies to limit the socio-economic impact of droughts under climate change. System Robustness Analysis (SRA) aims to support decision making by quantifying how well a system, with and without additional measures, can remain functioning under a range of external disturbances. Two system characteristics add up to system robustness: Resistance is the ability to withstand disturbances without responding (zero impact), and resilience is the ability to recover from the response to a disturbance. SRA can help to provide insight into the sensitivity of a system to changing magnitudes of extreme weather events. A regional-scale hydrologic and water management model is used to simulate the effect of changing precipitation and evaporation forcing on agricultural and urban water supply and demand in South Florida. The complex water management operational rules including water use restrictions are simulated in the model. Based on model runs with a various climate scenarios, drought events with a wide range of severity are identified and for each event the socio-economic impacts are determined. Here, a drought is defined as a reduced streamflow in the upstream Kissimmee basin, which contributes most to Lake Okeechobee, the major surface water storage in the system. The drought severity is characterized by the maximum drought deficit volume. Drought impacts are analyzed for several users in Miami Dade County. From

  13. Spaceport Florida Authority: Business Plan

    Science.gov (United States)

    1996-01-01

    The Spaceport Florida Authority (SFA) was established under Florida Statute by the Governor and Legislature to assist the development of our nation's space transportation industry and to generate new space-related jobs, investment and opportunities statewide. Included in the Authorities' business plan is the statement of work and list of team members involved in creating the report, SFA's current operating concept, market analysis, assessment of accomplishments, a sample operating concept and a "roadmap to success".

  14. Source evaluation report phase 2 investigation: Limited field investigation. Final report: United States Air Force Environmental Restoration Program, Eielson Air Force Base, Alaska

    Energy Technology Data Exchange (ETDEWEB)

    1994-10-01

    This report describes the limited field investigation work done to address issues and answer unresolved questions regarding a collection of potential contaminant sources at Eielson Air Force Base (AFB), near Fairbanks, Alaska. These sources were listed in the Eielson AFB Federal Facility Agreement supporting the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) cleanup of the base. The limited field investigation began in 1993 to resolve all remaining technical issues and provide the data and analysis required to evaluate the environmental hazard associated with these sites. The objective of the limited field investigation was to allow the remedial project managers to sort each site into one of three categories: requiring remedial investigation/feasibility study, requiring interim removal action, or requiring no further remedial action.

  15. Polarizable Force Field for DNA Based on the Classical Drude Oscillator: I. Refinement Using Quantum Mechanical Base Stacking and Conformational Energetics.

    Science.gov (United States)

    Lemkul, Justin A; MacKerell, Alexander D

    2017-05-09

    Empirical force fields seek to relate the configuration of a set of atoms to its energy, thus yielding the forces governing its dynamics, using classical physics rather than more expensive quantum mechanical calculations that are computationally intractable for large systems. Most force fields used to simulate biomolecular systems use fixed atomic partial charges, neglecting the influence of electronic polarization, instead making use of a mean-field approximation that may not be transferable across environments. Recent hardware and software developments make polarizable simulations feasible, and to this end, polarizable force fields represent the next generation of molecular dynamics simulation technology. In this work, we describe the refinement of a polarizable force field for DNA based on the classical Drude oscillator model by targeting quantum mechanical interaction energies and conformational energy profiles of model compounds necessary to build a complete DNA force field. The parametrization strategy employed in the present work seeks to correct weak base stacking in A- and B-DNA and the unwinding of Z-DNA observed in the previous version of the force field, called Drude-2013. Refinement of base nonbonded terms and reparametrization of dihedral terms in the glycosidic linkage, deoxyribofuranose rings, and important backbone torsions resulted in improved agreement with quantum mechanical potential energy surfaces. Notably, we expand on previous efforts by explicitly including Z-DNA conformational energetics in the refinement.

  16. Biscayne aquifer, southeast Florida

    Science.gov (United States)

    Klein, Howard; Hull, John E.

    1978-01-01

    Peak daily pumpage from the highly permeable, unconfined Biscayne aquifer for public water-supply systems in southeast Florida in 1975 was about 500 million gallons. Another 165 million gallons was withdrawn daily for irrigation. Recharge to the aquifer is primarily by local rainfall. Discharge is by evapotranspiration, canal drainage, coastal seepage, and pumping. Pollutants can enter the aquifer by direct infiltration from land surface or controlled canals, septic-tank and other drainfields, drainage wells, and solid-waste dumps. Most of the pollutants are concentrated in the upper 20 to 30 feet of the aquifer; public supply wells generally range in depth from about 75 to 150 feet. Dilution, dispersion, and adsorption tend to reduce the concentrations. Seasonal heavy rainfall and canal discharge accelerate ground-water circulation, thereby tending to dilute and flush upper zones of the aquifer. The ultimate fate of pollutants in the aquifer is the ocean, although some may be adsorbed by the aquifer materials en route to the ocean, and some are diverted to pumping wells. (Woodard-USGS)

  17. Andrew spares Florida Coast

    Science.gov (United States)

    Bush, Susan

    When geologists heard of the intensity of Hurricane Andrew, which struck the Florida coast on August 25 and then moved on to southern Louisiana, they were expecting the same kinds of coastal damage that Hurricane Hugo brought to the Caribbean and Carolina shores in 1989. Both storms were category 4 hurricanes, having winds of 131-155 mph and surges of 13-18 feet. However, the coastal damage never materialized, leaving geologists to analyze the factors that lessened the impact of the storm. “For minimum coastal damage, you couldn't have designed a better storm,” said Orrin Pilkey, director of the Program for the Study of Developed Shorelines (PSDS) in Durham, N.C. This was due in part to the nature of the storm itself and where it hit land, and in part to the regional geology, said Rob Thieler of PSDS. Despite the huge amounts of damage to buildings, there was virtually no evidence of coastal process destruction, he said.

  18. Crack growth in the creep region: criteria based on material forces

    International Nuclear Information System (INIS)

    Roche, R.L.

    1984-12-01

    Meaning of C* concept is discussed. It is shown that this concept is only a global approach of material force rate concept. The field of Csub(i)sup(*) (material force rate densities) is more representative of creep crack growth than C* integral. As application corrected expressions of C* are proposed for non isothermal cases, strain hardening creep and effect of material elasticity

  19. Normal and friction stabilization techniques for interactive rigid body constraint-based contact force computations

    DEFF Research Database (Denmark)

    Silcowitz-Hansen, Morten; Abel, Sarah Maria Niebe; Erleben, Kenny

    2010-01-01

    We present a novel, yet simple, method for stabilization of normal forces. A normal stabilization term, carefully designed from hypotheses about interactive usability, is added to the contact force problem. Further, we propose friction stabilization as a completely new stabilization paradigm in i...

  20. Recording the dynamic endocytosis of single gold nanoparticles by AFM-based force tracing.

    Science.gov (United States)

    Ding, Bohua; Tian, Yongmei; Pan, Yangang; Shan, Yuping; Cai, Mingjun; Xu, Haijiao; Sun, Yingchun; Wang, Hongda

    2015-05-07

    We utilized force tracing to directly record the endocytosis of single gold nanoparticles (Au NPs) with different sizes, revealing the size-dependent endocytosis dynamics and the crucial role of membrane cholesterol. The force, duration and velocity of Au NP invagination are accurately determined at the single-particle and microsecond level unprecedentedly.

  1. Muscle forces during running predicted by gradient-based and random search static optimisation algorithms.

    Science.gov (United States)

    Miller, Ross H; Gillette, Jason C; Derrick, Timothy R; Caldwell, Graham E

    2009-04-01

    Muscle forces during locomotion are often predicted using static optimisation and SQP. SQP has been criticised for over-estimating force magnitudes and under-estimating co-contraction. These problems may be related to SQP's difficulty in locating the global minimum to complex optimisation problems. Algorithms designed to locate the global minimum may be useful in addressing these problems. Muscle forces for 18 flexors and extensors of the lower extremity were predicted for 10 subjects during the stance phase of running. Static optimisation using SQP and two random search (RS) algorithms (a genetic algorithm and simulated annealing) estimated muscle forces by minimising the sum of cubed muscle stresses. The RS algorithms predicted smaller peak forces (42% smaller on average) and smaller muscle impulses (46% smaller on average) than SQP, and located solutions with smaller cost function scores. Results suggest that RS may be a more effective tool than SQP for minimising the sum of cubed muscle stresses in static optimisation.

  2. A force transmission system based on a tulip-shaped electrostatic clutch for haptic display devices

    Science.gov (United States)

    Sasaki, Hikaru; Shikida, Mitsuhiro; Sato, Kazuo

    2006-12-01

    This paper describes a novel type of force transmission system for haptic display devices. The system consists of an array of end-effecter elements, a force/displacement transmitter and a single actuator producing a large force/displacement. It has tulip-shaped electrostatic clutch devices to distribute the force/displacement from the actuator among the individual end effecters. The specifications of three components were determined to stimulate touched human fingers. The components were fabricated by using micro-electromechanical systems and conventional machining technologies, and finally they were assembled by hand. The performance of the assembled transmission system was experimentally examined and it was confirmed that each projection in the arrayed end effecters could be moved individually. The actuator in a system whose total size was only 3.0 cm × 3.0 cm × 4.0 cm produced a 600 mN force and displaced individual array elements by 18 µm.

  3. Fabrication of large scale nanostructures based on a modified atomic force microscope nanomechanical machining system.

    Science.gov (United States)

    Hu, Z J; Yan, Y D; Zhao, X S; Gao, D W; Wei, Y Y; Wang, J H

    2011-12-01

    The atomic force microscope (AFM) tip-based nanomechanical machining has been demonstrated to be a powerful tool for fabricating complex 2D∕3D nanostructures. But the machining scale is very small, which holds back this technique severely. How to enlarge the machining scale is always a major concern for the researches. In the present study, a modified AFM tip-based nanomechanical machining system is established through combination of a high precision X-Y stage with the moving range of 100 mm × 100 mm and a commercial AFM in order to enlarge the machining scale. It is found that the tracing property of the AFM system is feasible for large scale machining by controlling the constant normal load. Effects of the machining parameters including the machining direction and the tip geometry on the uniform machined depth with a large scale are evaluated. Consequently, a new tip trace and an increasing load scheme are presented to achieve a uniform machined depth. Finally, a polymer nanoline array with the dimensions of 1 mm × 0.7 mm, the line density of 1000 lines/mm and the average machined depth of 150 nm, and a 20 × 20 polymer square holes array with the scale of 380 μm × 380 μm and the average machined depth of 250 nm are machined successfully. The uniform of the machined depths for all the nanostructures is acceptable. Therefore, it is verified that the AFM tip-based nanomechanical machining method can be used to machine millimeter scale nanostructures.

  4. Mississippi waters reaching South Florida reefs under no flood conditions: synthesis of observing and modeling system findings

    Science.gov (United States)

    Le Hénaff, Matthieu; Kourafalou, Vassiliki H.

    2016-03-01

    In August 2014, in situ measurements revealed an intense salinity drop impacting South Florida coral reefs, between Pulley Ridge (Southwest Florida Shelf) and the Florida Keys. The low salinity waters had a surface signal of 32 (down from 35.2) and extended over a 15-20-m deep lens. Satellite observations showed that this abrupt drop in salinity was due to a southeastward export of Mississippi River waters from the Northern Gulf of Mexico (GoM), revealing strong interaction between coastal and oceanic flows. Unlike previous events of marked long-distance Mississippi water export, this episode is not associated with Mississippi flooding conditions, which makes it a unique study case. We have developed a high-resolution (~2 km) comprehensive hydrodynamic numerical model of the GoM to study the conditions that controlled the 2014 Mississippi River water export episode. It is based on the Hybrid Coordinate Ocean Model (HYCOM) and assimilates remotely sensed altimetry and sea surface temperature observations, to ensure that the simulated upper-ocean is realistic. This regional model has a detailed representation of coastal physics (especially river plume dynamics) and employs high-frequency river discharge and atmospheric forcing. The combined use of the simulation and observations reveals a unique pathway that brought Mississippi waters first eastward along the Northern GoM continental shelf, under prevailing winds and the presence of an anticyclonic Loop Current eddy, then southward along the edge of the West Florida Shelf, before reaching the deep GoM. Unlike usually observed, the offshore advection of Mississippi River waters thus took place far from the Delta area, which is another specificity of the 2014 episode. Finally, in the Florida Straits, Mississippi waters were advected from the deep ocean to the continental shelf under the influence of both deep sea (particularly a cyclonic Loop Current frontal eddy) and shelf flows (wind-induced Ekman transport). The

  5. Plantation Houses of North Florida

    Directory of Open Access Journals (Sweden)

    Eduardo Robles

    2017-06-01

    Full Text Available The concept of Plantation conjures an image that identifies the North Florida / South Georgia region of the U. S. Leon County attracted many cotton planters from Georgia, Virginia, Maryland, North and South Carolina in the 1820’s to the 1850’s. Up to the beginning of the Civil War, Leon County was the 5th largest producer of cotton counting all counties from Florida and Georgia. The Civil War brought the plantation culture to a standstill. The plantations transformed the environment based on their need for open fields in which to cultivate different crops, or raise a variety of animals with the help of slaves. From the 1900’s many plantations abandoned their land to nature producing a deep change in the local landscape. Today plantations are not used as much for planting crops but more for hunting or as tree farms. The hunting plantations do not grow crops but provide good conditions for the hunting of animals and birds. Other plantations were torn apart, sold and now are part of the Tallahassee urban fabric. In other words, they disappeared. The transformation of the plantations has been slow and steady, and has become the image of the area, even the region. The paper shows five plantations that represent five different evolutions of these traditional landscapes. The landscapes have evolved to accommodate the very local but fluid definition of place. It is this transformation, this evolving identity which helped preserve some of the traditional landscapes and the traditional architecture on them. The most prominent feature of the plantation is the “Big House” or plantation house. The house embodies all aspects of the plantation life style. The construction materials and methods reflected the times, the technologies and the available resources. The research has been done mainly in the archives of the Tallahassee Trust for Historic Preservation. The results, still pending, explain the land typology as it evolved from the golden decades

  6. Real-time deflection and friction force imaging by bimorph-based resonance-type high-speed scanning force microscopy in the contact mode.

    Science.gov (United States)

    Cai, Wei; Fan, Haiyun; Zhao, Jianyong; Shang, Guangyi

    2014-01-01

    We report herein an alternative high-speed scanning force microscopy method in the contact mode based on a resonance-type piezoelectric bimorph scanner. The experimental setup, the modified optical beam deflection scheme suitable for smaller cantilevers, and a high-speed control program for simultaneous data capture are described in detail. The feature of the method is that the deflection and friction force images of the sample surface can be obtained simultaneously in real time. Images of various samples (e.g., a test grating, a thin gold film, and fluorine-doped tin oxide-coated glass slides) are acquired successfully. The imaging rate is 25 frames per second, and the average scan speed reaches a value of approximately 2.5 cm/s. The method combines the advantages of both observing the dynamic processes of the sample surface and monitoring the frictional properties on the nanometer scale. 07.79.Lh; 07.79.Sp; 68.37.Ps.

  7. Carbonate to siliciclastic periplatform sediments: southwest Florida

    Science.gov (United States)

    Holmes, Charles W.

    1988-01-01

    Three distinct carbonate deposits have been identified on the slope and adjacent sea floor of the southwestern Florida Platform: (1) reef talus, recognized by shape and location, found on the upper slope of the Yucatan Channel and also east of the Marquesas Keys; (2) hemipelagic sediments, with complex sigmoid-oblique bed forms, filling the intervening gap between the channel and Keys and forming two lobes on the floor of the northern Florida Straits; and (3) turbidite deposits, with chaotic internal bed forms, covering siliciclastic Mississippi Fan sediments at the base of the canyons in the Florida escarpment. The source of the talus, eroded and transported during the many storms that frequent the region, is the reef complexes that have formed on the platform rim. The sediment of the other two deposits is of foraminiferal tests, produced in nutrient-rich waters at the shelf edge. This sediment is deposited on the outer shelf and is vigorously transported southward, as evidenced by 5 m high asymmetric sand waves.

  8. Direct current force sensing device based on compressive spring, permanent magnet, and coil-wound magnetostrictive/piezoelectric laminate.

    Science.gov (United States)

    Leung, Chung Ming; Or, Siu Wing; Ho, S L

    2013-12-01

    A force sensing device capable of sensing dc (or static) compressive forces is developed based on a NAS106N stainless steel compressive spring, a sintered NdFeB permanent magnet, and a coil-wound Tb(0.3)Dy(0.7)Fe(1.92)/Pb(Zr, Ti)O3 magnetostrictive∕piezoelectric laminate. The dc compressive force sensing in the device is evaluated theoretically and experimentally and is found to originate from a unique force-induced, position-dependent, current-driven dc magnetoelectric effect. The sensitivity of the device can be increased by increasing the spring constant of the compressive spring, the size of the permanent magnet, and/or the driving current for the coil-wound laminate. Devices of low-force (20 N) and high-force (200 N) types, showing high output voltages of 262 and 128 mV peak, respectively, are demonstrated at a low driving current of 100 mA peak by using different combinations of compressive spring and permanent magnet.

  9. Eye-tracking of visual attention in web-based assessment using the Force Concept Inventory

    Science.gov (United States)

    Han, Jing; Chen, Li; Fu, Zhao; Fritchman, Joseph; Bao, Lei

    2017-07-01

    This study used eye-tracking technology to investigate students’ visual attention while taking the Force Concept Inventory (FCI) in a web-based interface. Eighty nine university students were randomly selected into a pre-test group and a post-test group. Students took the 30-question FCI on a computer equipped with an eye-tracker. There were seven weeks of instruction between the pre- and post-test data collection. Students’ performance on the FCI improved significantly from pre-test to post-test. Meanwhile, the eye-tracking results reveal that the time students spent on taking the FCI test was not affected by student performance and did not change from pre-test to post-test. Analysis of students’ attention to answer choices shows that on the pre-test students primarily focused on the naïve choices and ignored the expert choices. On the post-test, although students had shifted their primary attention to the expert choices, they still kept a high level of attention to the naïve choices, indicating significant conceptual mixing and competition during problem solving. Outcomes of this study provide new insights on students’ conceptual development in learning physics.

  10. [Environmental investigation of ground water contamination at Wright-Patterson Air Force Base, Ohio

    International Nuclear Information System (INIS)

    1992-04-01

    This Removal Action System Design has been prepared as a Phase I Volume for the implementation of the Phase II removal action at Wright-Patterson Air Force Base (WPAFB) near Dayton, Ohio. The objective of the removal action is to prevent, to the extent practicable, the migration of ground water contaminated with chlorinated volatile organic compounds (VOCS) across the southwest boundary of Area C. The Phase 1, Volume 9 Removal Action System Design compiles the design documents prepared for the Phase II Removal Action. These documents, which are presented in Appendices to Volume 9, include: Process Design, which presents the 30 percent design for the ground water treatment system (GWTS); Design Packages 1 and 2 for Earthwork and Road Construction, and the Discharge Pipeline, respectively; no drawings are included in the appendix; Design Package 3 for installation of the Ground Water Extraction Well(s); Design Package 4 for installation of the Monitoring Well Instrumentation; and Design Package 5 for installation of the Ground Water Treatment System; this Design Package is incorporated by reference because of its size

  11. Experimental Robot Model Adjustments Based on Force-Torque Sensor Information.

    Science.gov (United States)

    Martinez, Santiago; Garcia-Haro, Juan Miguel; Victores, Juan G; Jardon, Alberto; Balaguer, Carlos

    2018-03-11

    The computational complexity of humanoid robot balance control is reduced through the application of simplified kinematics and dynamics models. However, these simplifications lead to the introduction of errors that add to other inherent electro-mechanic inaccuracies and affect the robotic system. Linear control systems deal with these inaccuracies if they operate around a specific working point but are less precise if they do not. This work presents a model improvement based on the Linear Inverted Pendulum Model (LIPM) to be applied in a non-linear control system. The aim is to minimize the control error and reduce robot oscillations for multiple working points. The new model, named the Dynamic LIPM (DLIPM), is used to plan the robot behavior with respect to changes in the balance status denoted by the zero moment point (ZMP). Thanks to the use of information from force-torque sensors, an experimental procedure has been applied to characterize the inaccuracies and introduce them into the new model. The experiments consist of balance perturbations similar to those of push-recovery trials, in which step-shaped ZMP variations are produced. The results show that the responses of the robot with respect to balance perturbations are more precise and the mechanical oscillations are reduced without comprising robot dynamics.

  12. Automated solid-phase subcloning based on beads brought into proximity by magnetic force.

    Directory of Open Access Journals (Sweden)

    Elton P Hudson

    Full Text Available In the fields of proteomics, metabolic engineering and synthetic biology there is a need for high-throughput and reliable cloning methods to facilitate construction of expression vectors and genetic pathways. Here, we describe a new approach for solid-phase cloning in which both the vector and the gene are immobilized to separate paramagnetic beads and brought into proximity by magnetic force. Ligation events were directly evaluated using fluorescent-based microscopy and flow cytometry. The highest ligation efficiencies were obtained when gene- and vector-coated beads were brought into close contact by application of a magnet during the ligation step. An automated procedure was developed using a laboratory workstation to transfer genes into various expression vectors and more than 95% correct clones were obtained in a number of various applications. The method presented here is suitable for efficient subcloning in an automated manner to rapidly generate a large number of gene constructs in various vectors intended for high throughput applications.

  13. Driving force analysis of the agricultural water footprint in China based on the LMDI method.

    Science.gov (United States)

    Zhao, Chunfu; Chen, Bin

    2014-11-04

    China's water scarcity problems have become more severe because of the unprecedented economic development and population explosion. Considering agriculture's large share of water consumption, obtaining a clear understanding of Chinese agricultural consumptive water use plays a key role in addressing China's water resource stress and providing appropriate water mitigation policies. We account for the Chinese agricultural water footprint from 1990 to 2009 based on bottom up approach. Then, the underlying driving forces are decomposed into diet structure effect, efficiency effect, economic activity effect, and population effect, and analyzed by applying a log-mean Divisia index (LMDI) model. The results reveal that the Chinese agricultural water footprint has risen from the 94.1 Gm3 in 1990 to 141 Gm3 in 2009. The economic activity effect is the largest positive contributor to promoting the water footprint growth, followed by the population effect and diet structure effect. Although water efficiency improvement as a significant negative effect has reduced overall water footprint, the water footprint decline from water efficiency improvement cannot compensate for the huge increase from the three positive driving factors. The combination of water efficiency improvement and dietary structure adjustment is the most effective approach for controlling the Chinese agricultural water footprint's further growth.

  14. Numerical Simulation of Recycled Concrete Using Convex Aggregate Model and Base Force Element Method

    Directory of Open Access Journals (Sweden)

    Yijiang Peng

    2016-01-01

    Full Text Available By using the Base Force Element Method (BFEM on potential energy principle, a new numerical concrete model, random convex aggregate model, is presented in this paper to simulate the experiment under uniaxial compression for recycled aggregate concrete (RAC which can also be referred to as recycled concrete. This model is considered as a heterogeneous composite which is composed of five mediums, including natural coarse aggregate, old mortar, new mortar, new interfacial transition zone (ITZ, and old ITZ. In order to simulate the damage processes of RAC, a curve damage model was adopted as the damage constitutive model and the strength theory of maximum tensile strain was used as the failure criterion in the BFEM on mesomechanics. The numerical results obtained in this paper which contained the uniaxial compressive strengths, size effects on strength, and damage processes of RAC are in agreement with experimental observations. The research works show that the random convex aggregate model and the BFEM with the curve damage model can be used for simulating the relationship between microstructure and mechanical properties of RAC.

  15. Weather Research and Forecasting Model Wind Sensitivity Study at Edwards Air Force Base, CA

    Science.gov (United States)

    Watson, Leela R.; Bauman, William H., III; Hoeth, Brian

    2009-01-01

    This abstract describes work that will be done by the Applied Meteorology Unit (AMU) in assessing the success of different model configurations in predicting "wind cycling" cases at Edwards Air Force Base, CA (EAFB), in which the wind speeds and directions oscillate among towers near the EAFB runway. The Weather Research and Forecasting (WRF) model allows users to choose among two dynamical cores - the Advanced Research WRF (ARW) and the Non-hydrostatic Mesoscale Model (NMM). There are also data assimilation analysis packages available for the initialization of the WRF model - the Local Analysis and Prediction System (LAPS) and the Advanced Regional Prediction System (ARPS) Data Analysis System (ADAS). Having a series of initialization options and WRF cores, as well as many options within each core, creates challenges for local forecasters, such as determining which configuration options are best to address specific forecast concerns. The goal of this project is to assess the different configurations available and determine which configuration will best predict surface wind speed and direction at EAFB.

  16. Patterns of intrinsic bioremediation at two U.S. Air Force bases

    International Nuclear Information System (INIS)

    Wiedemeier, T.H.; Swanson, M.A.; Wilson, J.T.; Kampbell, D.H.

    1995-01-01

    Intrinsic bioremediation of benzene, toluene, ethylbenzene, and xylenes (BTEX) occurs when indigenous microorganisms work to reduce the total mass of contamination in the subsurface without the addition of nutrients. A conservative tracer, such as trimethylbenzene, found commingled with the contaminant plume can be used to distinguish between attenuation caused by dispersion, dilution from recharge, volatilization, and sorption and attenuation caused by biodegradation. Patterns of intrinsic bioremediation can vary markedly from site to site depending on governing physical, biological, and chemical processes. Intrinsic bioremediation causes measurable changes in groundwater chemistry. Specifically, concentrations of contaminants, dissolved oxygen, nitrate, ferrous iron, sulfate, and methane in groundwater change both temporally and spatially as biodegradation proceeds Operations at Hill Air Force Base (AFB) and Patrick AFB resulted in fuel-hydrocarbon contamination of soil and groundwater. In both cases, trimethylbenzene data confirm that dissolved BTEX is biodegrading. Geochemical evidence from the Hill AFB site suggests that aerobic respiration, denitrification, iron reduction, sulfate reduction, and methanogenesis all are contributing to intrinsic bioremediation of dissolved BTEX. Sulfate reduction is the dominant biodegradation mechanism at this site. Geochemical evidence from Patrick AFB suggests that aerobic respiration, iron reduction, and methanogenesis are contributing to intrinsic bioremediation of dissolved BTEX. Methanogenesis is the dominant biodegradation mechanism at this site

  17. Modeling and analysis of a robust thermal control system based on forced convection thermal switches

    Science.gov (United States)

    Williams, Andrew D.; Palo, Scott E.

    2006-05-01

    There is a critical need, not just in the Department of Defense (DOD) but the entire space industry, to reduce the development time and overall cost of satellite missions. To that end, the DOD is actively pursuing the capability to reduce the deployment time of a new system from years to weeks or even days. The goal is to provide the advantages space affords not just to the strategic planner but also to the battlefield commanders. One of the most challenging aspects of this problem is the satellite's thermal control system (TCS). Traditionally the TCS must be vigorously designed, analyzed, tested, and optimized from the ground up for every satellite mission. This "reinvention of the wheel" is costly and time intensive. The next generation satellite TCS must be modular and scalable in order to cover a wide range of applications, orbits, and mission requirements. To meet these requirements a robust thermal control system utilizing forced convection thermal switches was investigated. The problem was investigated in two separate stages. The first focused on the overall design of the bus. The second stage focused on the overarching bus architecture and the design impacts of employing a thermal switch based TCS design. For the hot case, the fan provided additional cooling to increase the heat transfer rate of the subsystem. During the cold case, the result was a significant reduction in survival heater power.

  18. Recent Advances of MEMS Resonators for Lorentz Force Based Magnetic Field Sensors: Design, Applications and Challenges

    Directory of Open Access Journals (Sweden)

    Agustín Leobardo Herrera-May

    2016-08-01

    Full Text Available Microelectromechanical systems (MEMS resonators have allowed the development of magnetic field sensors with potential applications such as biomedicine, automotive industry, navigation systems, space satellites, telecommunications and non-destructive testing. We present a review of recent magnetic field sensors based on MEMS resonators, which operate with Lorentz force. These sensors have a compact structure, wide measurement range, low energy consumption, high sensitivity and suitable performance. The design methodology, simulation tools, damping sources, sensing techniques and future applications of magnetic field sensors are discussed. The design process is fundamental in achieving correct selection of the operation principle, sensing technique, materials, fabrication process and readout systems of the sensors. In addition, the description of the main sensing systems and challenges of the MEMS sensors are discussed. To develop the best devices, researches of their mechanical reliability, vacuum packaging, design optimization and temperature compensation circuits are needed. Future applications will require multifunctional sensors for monitoring several physical parameters (e.g., magnetic field, acceleration, angular ratio, humidity, temperature and gases.

  19. Master equation-based analysis of a motor-clutch model for cell traction force.

    Science.gov (United States)

    Bangasser, Benjamin L; Odde, David J

    2013-12-01

    Microenvironmental mechanics play an important role in determining the morphology, traction, migration, proliferation, and differentiation of cells. A stochastic motor-clutch model has been proposed to describe this stiffness sensitivity. In this work, we present a master equation-based ordinary differential equation (ODE) description of the motor-clutch model, from which we derive an analytical expression to for a cell's optimum stiffness (i.e. the stiffness at which the traction force is maximal). This analytical expression provides insight into the requirements for stiffness sensing by establishing fundamental relationships between the key controlling cell-specific parameters. We find that the fundamental controlling parameters are the numbers of motors and clutches (constrained to be nearly equal), and the time scale of the on-off kinetics of the clutches (constrained to favor clutch binding over clutch unbinding). Both the ODE solution and the analytical expression show good agreement with Monte Carlo motor-clutch output, and reduce computation time by several orders of magnitude, which potentially enables long time scale behaviors (hours-days) to be studied computationally in an efficient manner. The ODE solution and the analytical expression may be incorporated into larger scale models of cellular behavior to bridge the gap from molecular time scales to cellular and tissue time scales.

  20. Force Sensitive Handles and Capacitive Touch Sensor for Driving a Flexible Haptic-Based Immersive System

    Directory of Open Access Journals (Sweden)

    Umberto Cugini

    2013-10-01

    Full Text Available In this article, we present an approach that uses both two force sensitive handles (FSH and a flexible capacitive touch sensor (FCTS to drive a haptic-based immersive system. The immersive system has been developed as part of a multimodal interface for product design. The haptic interface consists of a strip that can be used by product designers to evaluate the quality of a 3D virtual shape by using touch, vision and hearing and, also, to interactively change the shape of the virtual object. Specifically, the user interacts with the FSH to move the virtual object and to appropriately position the haptic interface for retrieving the six degrees of freedom required for both manipulation and modification modalities. The FCTS allows the system to track the movement and position of the user’s fingers on the strip, which is used for rendering visual and sound feedback. Two evaluation experiments are described, which involve both the evaluation and the modification of a 3D shape. Results show that the use of the haptic strip for the evaluation of aesthetic shapes is effective and supports product designers in the appreciation of the aesthetic qualities of the shape.

  1. The effects of aircraft noise at Williams Air Force Base Auxiliary Field on residential property values

    Energy Technology Data Exchange (ETDEWEB)

    Morey, M.J.

    1990-11-01

    This report considers the environmental consequences of moving the flight training operations of the US Air Force's 82nd Flying Training Wing from the auxiliary airfield, Coolidge-Florence Municipal Airport (CFMA), to a more remote location in Pinal County, Arizona. It examines how actual noise from touch-and-go flights of T-37 aircraft and perceived (anticipated) noise affect the market value of residential property near CFMA. Noise, measured by a noise index, is correlated with market values through a regression analysis applied to a hedonic price model of the Coolidge-Florence housing market. Prices and characteristics of 42 residential properties sold in 1987 and 1988 were used to estimate a perceived noise effect. The report finds that the coefficient on the measure of perceived noise, based on the noise exposure forecast (NEF) index, is statistically insignificant, even though the sign and value are consistent with those estimated in other studies. It concludes that current flights do not have a significant effect on residential property values, partially because there is no housing near CFMA. This and larger studies indicate that flight operations at a new auxiliary airfield would not affect property values if runways were at least 12,000 feet away from housing. 12 refs., 2 tabs.

  2. Intelligent tuning method of PID parameters based on iterative learning control for atomic force microscopy.

    Science.gov (United States)

    Liu, Hui; Li, Yingzi; Zhang, Yingxu; Chen, Yifu; Song, Zihang; Wang, Zhenyu; Zhang, Suoxin; Qian, Jianqiang

    2018-01-01

    Proportional-integral-derivative (PID) parameters play a vital role in the imaging process of an atomic force microscope (AFM). Traditional parameter tuning methods require a lot of manpower and it is difficult to set PID parameters in unattended working environments. In this manuscript, an intelligent tuning method of PID parameters based on iterative learning control is proposed to self-adjust PID parameters of the AFM according to the sample topography. This method gets enough information about the output signals of PID controller and tracking error, which will be used to calculate the proper PID parameters, by repeated line scanning until convergence before normal scanning to learn the topography. Subsequently, the appropriate PID parameters are obtained by fitting method and then applied to the normal scanning process. The feasibility of the method is demonstrated by the convergence analysis. Simulations and experimental results indicate that the proposed method can intelligently tune PID parameters of the AFM for imaging different topographies and thus achieve good tracking performance. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Attenuated geophysical signatures associated with ongoing remediation efforts at Wurtsmith Air Force Base, Oscoda, Michigan

    Science.gov (United States)

    Che-Alota, V.; Atekwana, E. A.; Sauck, W. A.; Nolan, J. T.; Slater, L. D.

    2007-12-01

    Previous geophysical investigations (1996, 1997, 2003, and 2004) conducted at the decommissioned Wurtsmith Air Force Base former Fire Training Cell (FT-02) showed a clearly defined high conductivity anomaly associated with hydrocarbon contaminants in the vadose zone and ground water near the source area. The source of the geophysical anomalies was attributed to biogeochemical modifications of the contaminated zone resulting from intrinsic bioremediation. During these previous surveys, ground penetrating radar (GPR) data showed a zone of attenuated GPR reflections extending from the vadose zone to below the water table. Self potential data (SP) data defined a positive anomaly coincident with the hydrochemically defined plume, while electrical resistivity data showed anomalously high conductivity within the zone of impact. In 2007, another integrated geophysical study of the site was conducted. GPR, SP, electrical resistivity, and induced polarization surveys were conducted with expectations of achieving similar results as the past surveys. However, preliminary assessment of the data shows a marked decrease in electrical conductivity and SP response over the plume. GPR data still showed the attenuated signals, but the zone of attenuation was only observed below the water table. We attribute the attenuation of the observed geophysical anomalies to ongoing soil vapor extraction initiated in 2003. Significant removal of the contaminant mass by the vapor extraction system has altered the subsurface biogeochemical conditions and these changes were documented by the 2007 geophysical and geochemical data. The results of this study show that the attenuation of the contaminant plume is detectable with geophysical methods.

  4. Recent Advances of MEMS Resonators for Lorentz Force Based Magnetic Field Sensors: Design, Applications and Challenges.

    Science.gov (United States)

    Herrera-May, Agustín Leobardo; Soler-Balcazar, Juan Carlos; Vázquez-Leal, Héctor; Martínez-Castillo, Jaime; Vigueras-Zuñiga, Marco Osvaldo; Aguilera-Cortés, Luz Antonio

    2016-08-24

    Microelectromechanical systems (MEMS) resonators have allowed the development of magnetic field sensors with potential applications such as biomedicine, automotive industry, navigation systems, space satellites, telecommunications and non-destructive testing. We present a review of recent magnetic field sensors based on MEMS resonators, which operate with Lorentz force. These sensors have a compact structure, wide measurement range, low energy consumption, high sensitivity and suitable performance. The design methodology, simulation tools, damping sources, sensing techniques and future applications of magnetic field sensors are discussed. The design process is fundamental in achieving correct selection of the operation principle, sensing technique, materials, fabrication process and readout systems of the sensors. In addition, the description of the main sensing systems and challenges of the MEMS sensors are discussed. To develop the best devices, researches of their mechanical reliability, vacuum packaging, design optimization and temperature compensation circuits are needed. Future applications will require multifunctional sensors for monitoring several physical parameters (e.g., magnetic field, acceleration, angular ratio, humidity, temperature and gases).

  5. (Environmental investigation of ground water contamination at Wright-Patterson Air Force Base, Ohio)

    Energy Technology Data Exchange (ETDEWEB)

    Thompson, Bill

    1991-10-01

    In April 1990, Wright-Patterson Air Force Base (WPAFB), initiated an investigation to evaluate a potential Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) removal action to prevent, to the extent practicable, the offsite migration of contaminated ground water from WPAFB. WPAFB retained the services of the Environmental Management Operations (EMO) and its principle subcontractor, International Technology Corporation (IT) to complete Phase 1 of the environmental investigation of ground-water contamination at WPAFB. Phase 1 of the investigation involves the short-term evaluation and potential design for a program to remove ground-water contamination that appears to be migrating across the western boundary of Area C, and across the northern boundary of Area B along Springfield Pike. Primarily, Task 4 of Phase 1 focuses on collection of information at the Area C and Springfield Pike boundaries of WPAFB. This Sampling and Analysis Plan (SAP) has been prepared to assist in completion of the Task 4 field investigation and is comprised of the Quality Assurance Project Plan (QAPP) and the Field Sampling Plan (FSP).

  6. Free Form Deformation-Based Image Registration Improves Accuracy of Traction Force Microscopy.

    Directory of Open Access Journals (Sweden)

    Alvaro Jorge-Peñas

    Full Text Available Traction Force Microscopy (TFM is a widespread method used to recover cellular tractions from the deformation that they cause in their surrounding substrate. Particle Image Velocimetry (PIV is commonly used to quantify the substrate's deformations, due to its simplicity and efficiency. However, PIV relies on a block-matching scheme that easily underestimates the deformations. This is especially relevant in the case of large, locally non-uniform deformations as those usually found in the vicinity of a cell's adhesions to the substrate. To overcome these limitations, we formulate the calculation of the deformation of the substrate in TFM as a non-rigid image registration process that warps the image of the unstressed material to match the image of the stressed one. In particular, we propose to use a B-spline -based Free Form Deformation (FFD algorithm that uses a connected deformable mesh to model a wide range of flexible deformations caused by cellular tractions. Our FFD approach is validated in 3D fields using synthetic (simulated data as well as with experimental data obtained using isolated endothelial cells lying on a deformable, polyacrylamide substrate. Our results show that FFD outperforms PIV providing a deformation field that allows a better recovery of the magnitude and orientation of tractions. Together, these results demonstrate the added value of the FFD algorithm for improving the accuracy of traction recovery.

  7. VIRGY: a virtual reality and force feedback based endoscopic surgery simulator.

    Science.gov (United States)

    Baur, C; Guzzoni, D; Georg, O

    1998-01-01

    This paper describes the VIRGY project at the VRAI Group (Virtual Reality and Active Interface), Swiss Federal Institute of Technology (Lausanne, Switzerland). Since 1994, we have been investigating a variety of virtual-reality based methods for simulating laparoscopic surgery procedures. Our goal is to develop an endoscopic surgical training tool which realistically simulates the interactions between one or more surgical instruments and gastrointestinal organs. To support real-time interaction and manipulation between instruments and organs, we have developed several novel graphic simulation techniques. In particular, we are using live video texturing to achieve dynamic effects such as bleeding or vaporization of fatty tissues. Special texture manipulations allows us to generate pulsing objects while minimizing processor load. Additionally, we have created a new surface deformation algorithm which enables real-time deformations under external constraints. Lastly, we have developed a new 3D object definition which allows us to perform operations such as total or partial object cuttings, as well as to selectively render objects with different levels of detail. To provide realistic physical simulation of the forces and torques on surgical instruments encountered during an operation, we have also designed a new haptic device dedicated to endososcopic surgery constraints. We are using special interpolation and extrapolation techniques to integrate our 25 Hz visual simulation with the 300 Hz feedback required for realistic tactile interaction. The fully VIRGY simulator has been tested by surgeons and the quality of both our visual and haptic simulation has been judged sufficient for training basic surgery gestures.

  8. A flexible tactile sensor calibration method based on an air-bearing six-dimensional force measurement platform

    Science.gov (United States)

    Huang, Bin

    2015-07-01

    A number of common issues related to the process of flexible tactile sensor calibration are discussed in this paper, and an estimate of the accuracy of classical calibration methods, as represented by a weight-pulley device, is presented. A flexible tactile sensor calibration method that is based on a six-dimensional force measurement is proposed on the basis of a theoretical analysis. A high-accuracy flexible tactile sensor calibration bench based on the air-bearing six-dimensional force measurement principle was developed to achieve a technically challenging measurement accuracy of 2% full scale (FS) for three-dimensional (3D) flexible tactile sensor calibration. The experimental results demonstrate that the accuracy of the air-bearing six-dimensional force measurement platform can reach 0.2% FS. Thus, the system satisfies the 3D flexible tactile sensor calibration requirement of 2% FS.

  9. Computational Intelligence Based Data Fusion Algorithm for Dynamic sEMG and Skeletal Muscle Force Modelling

    Energy Technology Data Exchange (ETDEWEB)

    Chandrasekhar Potluri,; Madhavi Anugolu; Marco P. Schoen; D. Subbaram Naidu

    2013-08-01

    In this work, an array of three surface Electrography (sEMG) sensors are used to acquired muscle extension and contraction signals for 18 healthy test subjects. The skeletal muscle force is estimated using the acquired sEMG signals and a Non-linear Wiener Hammerstein model, relating the two signals in a dynamic fashion. The model is obtained from using System Identification (SI) algorithm. The obtained force models for each sensor are fused using a proposed fuzzy logic concept with the intent to improve the force estimation accuracy and resilience to sensor failure or misalignment. For the fuzzy logic inference system, the sEMG entropy, the relative error, and the correlation of the force signals are considered for defining the membership functions. The proposed fusion algorithm yields an average of 92.49% correlation between the actual force and the overall estimated force output. In addition, the proposed fusionbased approach is implemented on a test platform. Experiments indicate an improvement in finger/hand force estimation.

  10. Combining spanwise morphing, inline motion and model based optimization for force magnitude and direction control

    Science.gov (United States)

    Scheller, Johannes; Braza, Marianna; Triantafyllou, Michael

    2016-11-01

    Bats and other animals rapidly change their wingspan in order to control the aerodynamic forces. A NACA0013 type airfoil with dynamically changing span is proposed as a simple model to experimentally study these biomimetic morphing wings. Combining this large-scale morphing with inline motion allows to control both force magnitude and direction. Force measurements are conducted in order to analyze the impact of the 4 degree of freedom flapping motion on the flow. A blade-element theory augmented unsteady aerodynamic model is then used to derive optimal flapping trajectories.

  11. The impact of previous knee injury on force plate and field-based measures of balance.

    Science.gov (United States)

    Baltich, Jennifer; Whittaker, Jackie; Von Tscharner, Vinzenz; Nettel-Aguirre, Alberto; Nigg, Benno M; Emery, Carolyn

    2015-10-01

    Individuals with post-traumatic osteoarthritis demonstrate increased sway during quiet stance. The prospective association between balance and disease onset is unknown. Improved understanding of balance in the period between joint injury and disease onset could inform secondary prevention strategies to prevent or delay the disease. This study examines the association between youth sport-related knee injury and balance, 3-10years post-injury. Participants included 50 individuals (ages 15-26years) with a sport-related intra-articular knee injury sustained 3-10years previously and 50 uninjured age-, sex- and sport-matched controls. Force-plate measures during single-limb stance (center-of-pressure 95% ellipse-area, path length, excursion, entropic half-life) and field-based balance scores (triple single-leg hop, star-excursion, unipedal dynamic balance) were collected. Descriptive statistics (mean within-pair difference; 95% confidence intervals) were used to compare groups. Linear regression (adjusted for injury history) was used to assess the relationship between ellipse-area and field-based scores. Injured participants on average demonstrated greater medio-lateral excursion [mean within-pair difference (95% confidence interval); 2.8mm (1.0, 4.5)], more regular medio-lateral position [10ms (2, 18)], and shorter triple single-leg hop distances [-30.9% (-8.1, -53.7)] than controls, while no between group differences existed for the remaining outcomes. After taking into consideration injury history, triple single leg hop scores demonstrated a linear association with ellipse area (β=0.52, 95% confidence interval 0.01, 1.01). On average the injured participants adjusted their position less frequently and demonstrated a larger magnitude of movement during single-limb stance compared to controls. These findings support the evaluation of balance outcomes in the period between knee injury and post-traumatic osteoarthritis onset. Copyright © 2015 Elsevier Ltd. All rights

  12. Influence of vegetable based cutting fluids on cutting force and vibration signature during milling of aluminium metal matrix composites

    Directory of Open Access Journals (Sweden)

    S. Shankar

    2017-03-01

    Full Text Available Due to the environmental and health issues, there is an enormous requirement for developing the novel cutting fluids (CFs. The vegetable based cutting fluid (VBCFs doesn’t affect the environment, diminish the harmful effects to the operator and also enhance the machining performances such as surface roughness, tool life, minimum vibration and cutting forces. In this work, the performances of four different VBCFs like palm, coconut, sunflower, soya bean oils, and a commercial type of CFs were considered to analyze the influence of cutting fluids while measuring the cutting force and vibration signatures during milling of 7075–T6 hybrid aluminium metal matrix composite with carbide insert tool. The experiments were conducted in CNC L-MILL 55 vertical machining center, with milling tool dynamometer to measure the cutting force and a tri-axial accelerometer to measure the vibration signals. The flow rate of the VBCFs were maintained at a constant rate and the results were compared with a commercial cutting fluid. The obtained result shows that palm oil suits better than the other vegetable based cutting fluids in terms of minimum cutting force requirement and minimum vibration. Also, the experimental result shows that the cutting fluid was one of the important parameter needs to be considered which influences the cutting force and vibration signals.

  13. A novel aptasensor based on single-molecule force spectroscopy for highly sensitive detection of mercury ions.

    Science.gov (United States)

    Li, Qing; Michaelis, Monika; Wei, Gang; Colombi Ciacchi, Lucio

    2015-08-07

    We have developed a novel aptasensor based on single-molecule force spectroscopy (SMFS) capable of detecting mercury ions (Hg(2+)) with sub-nM sensitivity. The single-strand (ss) DNA aptamer used in this work is rich in thymine (T) and readily forms T-Hg(2+)-T complexes in the presence of Hg(2+). The aptamer was conjugated to an atomic force microscope (AFM) probe, and the adhesion force between the probe and a flat graphite surface was measured by single-molecule force spectroscopy (SMFS). The presence of Hg(2+) ions above a concentration threshold corresponding to the affinity constant of the ions for the aptamer (about 5 × 10(9) M(-1)) could be easily detected by a change of the measured adhesion force. With our chosen aptamer, we could reach an Hg(2+) detection limit of 100 pM, which is well below the maximum allowable level of Hg(2+) in drinking water. In addition, this aptasensor presents a very high selectivity for Hg(2+) over other metal cations, such as K(+), Ca(2+), Zn(2+), Fe(2+), and Cd(2+). Furthermore, the effects of the ionic strength and loading rate on the Hg(2+) detection were evaluated. Its simplicity, reproducibility, high selectivity and sensitivity make our SMFS-based aptasensor advantageous with respect to other current Hg(2+) sensing methods. It is expected that our strategy can be exploited for monitoring the pollution of water environments and the safety of potentially contaminated food.

  14. An Evaluation of Wind Turbine Technology at Peterson Air Force Base

    National Research Council Canada - National Science Library

    Combs, Randy C

    2005-01-01

    .... In accordance with Executive Orders, the Air Force must reduce greenhouse emissions and energy consumption, and expand the use of renewable energy sources within its facilities nation-wide by year 2010...

  15. Proof of Concept: Model Based Bionic Muscle with Hyperbolic Force-Velocity Relation

    Directory of Open Access Journals (Sweden)

    D. F. B. Haeufle

    2012-01-01

    Full Text Available Recently, the hyperbolic Hill-type force-velocity relation was derived from basic physical components. It was shown that a contractile element CE consisting of a mechanical energy source (active element AE, a parallel damper element (PDE, and a serial element (SE exhibits operating points with hyperbolic force-velocity dependency. In this paper, a technical proof of this concept was presented. AE and PDE were implemented as electric motors, SE as a mechanical spring. The force-velocity relation of this artificial CE was determined in quick release experiments. The CE exhibited hyperbolic force-velocity dependency. This proof of concept can be seen as a well-founded starting point for the development of Hill-type artificial muscles.

  16. Model-based traction force microscopy reveals differential tension in cellular actin bundles.

    Science.gov (United States)

    Soiné, Jérôme R D; Brand, Christoph A; Stricker, Jonathan; Oakes, Patrick W; Gardel, Margaret L; Schwarz, Ulrich S

    2015-03-01

    Adherent cells use forces at the cell-substrate interface to sense and respond to the physical properties of their environment. These cell forces can be measured with traction force microscopy which inverts the equations of elasticity theory to calculate them from the deformations of soft polymer substrates. We introduce a new type of traction force microscopy that in contrast to traditional methods uses additional image data for cytoskeleton and adhesion structures and a biophysical model to improve the robustness of the inverse procedure and abolishes the need for regularization. We use this method to demonstrate that ventral stress fibers of U2OS-cells are typically under higher mechanical tension than dorsal stress fibers or transverse arcs.

  17. Model-based traction force microscopy reveals differential tension in cellular actin bundles.

    Directory of Open Access Journals (Sweden)

    Jérôme R D Soiné

    2015-03-01

    Full Text Available Adherent cells use forces at the cell-substrate interface to sense and respond to the physical properties of their environment. These cell forces can be measured with traction force microscopy which inverts the equations of elasticity theory to calculate them from the deformations of soft polymer substrates. We introduce a new type of traction force microscopy that in contrast to traditional methods uses additional image data for cytoskeleton and adhesion structures and a biophysical model to improve the robustness of the inverse procedure and abolishes the need for regularization. We use this method to demonstrate that ventral stress fibers of U2OS-cells are typically under higher mechanical tension than dorsal stress fibers or transverse arcs.

  18. Effectiveness Evaluation of Force Protection Training Using Computer-Based Instruction and X3d Simulation

    National Research Council Canada - National Science Library

    Cruzbaez, Wilfredo

    2007-01-01

    Due to growing operational constraints accelerated by the Global War on Terror, the United States Navy is looking for alternative methods of training to maintain its force in a high status of readiness...

  19. 33 CFR 334.635 - Hillsborough Bay and waters contiguous to MacDill Air Force Base, Fla.; restricted area.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Hillsborough Bay and waters... Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE DANGER ZONE AND RESTRICTED AREA REGULATIONS § 334.635 Hillsborough Bay and waters contiguous to MacDill Air Force Base, Fla.; restricted area...

  20. Final Environmental Assessment for a Proposed Pararescue and Combat Rescue Officer Training Campus at Kirtland Air Force Base

    Science.gov (United States)

    2006-09-01

    beginning of 2005 within the ROI was 5.2 percent (New Mexico Department of Labor 2005). 3.3.2.3 Kirtland Air Force Base Kirtland AFB had...International Sunport, New Mexico. Accessed 5/2005 from http://www. wrcc.dri.edu/ CLIMA TEDA T A.html. AETC P J/CRO Campus at Kirtland AFB Preliminary

  1. Environmental Assessment to Construct a Perimeter Fence at Georgetown Military Family Housing Travis Air Force Base, Fairfield, California

    Science.gov (United States)

    2011-07-06

    Ardea herodias), crows (Corvus brachyrhynchos), ravens (Corvus corax), garter snakes (Thamnophis species), bullfrogs ( Rana catesbeiana ), California...California Tiger Salamander Habitat Assessment at Travis Air Force Base, Solano County, California Rana Resources 2005 Results of First Year Special...clover FE Potential Animals Rana aurora draytonii California red-legged frog FT Potential Ambystoma californiense California tiger salamander FT

  2. Environmental Assessment: Combat Information Transport System Upgrade Vandenberg Air Force Base, California

    Science.gov (United States)

    2006-07-21

    centerline of Point Sal Road, Bear Creek Road, Coast Road, and Station Road, no deeper than 12 to 18 inches below surface, not to exceed the depth of the...AIRFA Air Force AOC AOI APCD APE ARPA bgs BMP BTEX CAA CAAQS Cal EPA Cal OSHA CAP CARB CCA CCR CDFG CEQ CERCLA CFR CITS CNDDB...California Coastal Zone Management Program was formed through the California Coastal Act ( CCA ) of 1972. The Air Force is responsible for making final

  3. Waste-to-Energy Plant Environmental Assessment, Dyess Air Force Base, Texas

    Science.gov (United States)

    2011-09-01

    AGE aerospace ground equipment Air Force United States Air Force ATSDR Agency for Toxic Substances and Disease Registry CAA Clean Air Act CAAA...the heart of the WTE plant. The WTE itself would be comprised of several components that are typically used for power generation, including a...tailed hawk, Swainson’s hawk, vesper sparrow, Mourning dove, northern bobwhite, wild turkey, golden-fronted woodpecker, ladder-backed woodpecker

  4. Titin-Based Nanoparticle Tension Sensors Map High-Magnitude Integrin Forces within Focal Adhesions.

    Science.gov (United States)

    Galior, Kornelia; Liu, Yang; Yehl, Kevin; Vivek, Skanda; Salaita, Khalid

    2016-01-13

    Mechanical forces transmitted through integrin transmembrane receptors play important roles in a variety of cellular processes ranging from cell development to tumorigenesis. Despite the importance of mechanics in integrin function, the magnitude of integrin forces within adhesions remains unclear. Literature suggests a range from 1 to 50 pN, but the upper limit of integrin forces remains unknown. Herein we challenge integrins with the most mechanically stable molecular tension probe, which is comprised of the immunoglobulin 27th (I27) domain of cardiac titin flanked with a fluorophore and gold nanoparticle. Cell experiments show that integrin forces unfold the I27 domain, suggesting that integrin forces exceed ∼30-40 pN. The addition of a disulfide bridge within I27 "clamps" the probe and resists mechanical unfolding. Importantly, incubation with a reducing agent initiates SH exchange, thus unclamping I27 at a rate that is dependent on the applied force. By recording the rate of S-S reduction in clamped I27, we infer that integrins apply 110 ± 9 pN within focal adhesions of rat embryonic fibroblasts. The rates of S-S exchange are heterogeneous and integrin subtype-dependent. Nanoparticle titin tension sensors along with kinetic analysis of unfolding demonstrate that a subset of integrins apply tension many fold greater than previously reported.

  5. Effects of contaminants on reproductive success of aquatic birds nesting at Edwards Air Force Base, California

    Science.gov (United States)

    Hothem, R.L.; Crayon, J.J.; Law, M.A.

    2006-01-01

    Contamination by organochlorine pesticides (OCs), polychlorinated biphenyls, metals, and trace elements at Edwards Air Force Base (EAFB), located in the Mojave Desert, could adversely affect nesting aquatic birds, especially at the sewage lagoons that comprise Piute Ponds. Estimates of avian reproduction, in conjunction with analyses of eggs and avian foods for contaminant residues, may indicate the potential for negative effects on avian populations. From 1996 to 1999, we conducted studies at the Piute Ponds area of EAFB to evaluate the impacts of contaminants on nesting birds. Avian reproduction was evaluated in 1999. Eggs were collected for chemical analyses in 1996 and 1999, and African clawed frogs (Xenopus laevis), a likely food source, were collected for chemical analyses in 1998. Avian species occupying the higher trophic levels-black-crowned night-heron (Nycticorax nycticorax), white-faced ibis (Plegadis chihi), and American avocet (Recurvirostra americana)-generally bioaccumulated higher concentrations of contaminants in their eggs. Reproductive success and egg hatchability of night-herons and white-faced ibises in the Piute Ponds were similar to results observed at other western colonies. Deformities were observed in only one embryo in this study, but concentrations of contaminants evaluated in this ibis embryo were considered insufficient to have caused the deformities. Because clawed frogs, a primary prey item for night-herons at Piute Ponds, had no detectable levels of any OCs, it is likely that OCs found in night-heron eggs were acquired from the wintering grounds rather than from EAFB. The presence of isomers of dichlorodiphenyltrichloroethane (DDT) in ibis eggs indicated recent exposure, but invertebrates used for food by ibises were not sampled at Piute Ponds, and conclusions about the source of OCs in ibis eggs could not be made. Concentrations of contaminants in random and failed eggs of individual species were not different, and we concluded

  6. Geologic investigation :an update of subsurface geology on Kirtland Air Force Base, New Mexico.

    Energy Technology Data Exchange (ETDEWEB)

    Van Hart, Dirk (GRAM, Inc.)

    2003-06-01

    The objective of this investigation was to generate a revised geologic model of Kirtland Air Force Base (KAFB) incorporating the geological and geophysical data produced since the Site-Wide Hydrogeologic Characterization Project (SWHC) of 1994 and 1995. Although this report has certain stand-alone characteristics, it is intended to complement the previous work and to serve as a status report as of late 2002. In the eastern portion of KAFB (Lurance Canyon and the Hubbell bench), of primary interest is the elevation to which bedrock is buried under a thin cap of alluvium. Elevation maps of the bedrock top reveal the paleodrainage that allows for the interpretation of the area's erosional history. The western portion of KAFB consists of the eastern part of the Albuquerque basin where bedrock is deeply buried under Santa Fe Group alluvium. In this area, the configuration of the down-to-the-west, basin-bounding Sandia and West Sandia faults is of primary interest. New geological and geophysical data and the reinterpretation of old data help to redefine the location and magnitude of these elements. Additional interests in this area are the internal stratigraphy and structure of the Santa Fe Group. Recent data collected from new monitoring wells in the area have led to a geologic characterization of the perched Tijeras Arroyo Groundwater system and have refined the known limits of the Ancestral Rio Grande fluvial sediments within the Santa Fe Group. Both the reinterpretation of the existing data and a review of the regional geology have shown that a segment of the boundary between the eastern and western portions of KAFB is a complicated early Tertiary (Laramide) wrench-fault system, the Tijeras/Explosive Ordnance Disposal Area/Hubbell Spring system. A portion of this fault zone is occupied by a coeval ''pull-apart'' basin filled with early Tertiary conglomerates, whose exposures form the ''Travertine Hills''.

  7. A Fabry-Perot Interferometry Based MRI-Compatible Miniature Uniaxial Force Sensor for Percutaneous Needle Placement

    OpenAIRE

    Shang, Weijian; Su, Hao; Li, Gang; Furlong, Cosme; Fischer, Gregory S.

    2013-01-01

    Robot-assisted surgical procedures, taking advantage of the high soft tissue contrast and real-time imaging of magnetic resonance imaging (MRI), are developing rapidly. However, it is crucial to maintain tactile force feedback in MRI-guided needle-based procedures. This paper presents a Fabry-Perot interference (FPI) based system of an MRI-compatible fiber optic sensor which has been integrated into a piezoelectrically actuated robot for prostate cancer biopsy and brachytherapy in 3T MRI scan...

  8. Force sensing based on coherent quantum noise cancellation in a hybrid optomechanical cavity with squeezed-vacuum injection

    Science.gov (United States)

    Motazedifard, Ali; Bemani, F.; Naderi, M. H.; Roknizadeh, R.; Vitali, D.

    2016-07-01

    We propose and analyse a feasible experimental scheme for a quantum force sensor based on the elimination of backaction noise through coherent quantum noise cancellation (CQNC) in a hybrid atom-cavity optomechanical setup assisted with squeezed vacuum injection. The force detector, which allows for a continuous, broadband detection of weak forces well below the standard quantum limit (SQL), is formed by a single optical cavity simultaneously coupled to a mechanical oscillator and to an ensemble of ultracold atoms. The latter acts as a negative-mass oscillator so that atomic noise exactly cancels the backaction noise from the mechanical oscillator due to destructive quantum interference. Squeezed vacuum injection enforces this cancellation and allows sub-SQL sensitivity to be reached in a very wide frequency band, and at much lower input laser powers.

  9. Force sensing based on coherent quantum noise cancellation in a hybrid optomechanical cavity with squeezed-vacuum injection

    International Nuclear Information System (INIS)

    Motazedifard, Ali; Bemani, F; Naderi, M H; Roknizadeh, R; Vitali, D

    2016-01-01

    We propose and analyse a feasible experimental scheme for a quantum force sensor based on the elimination of backaction noise through coherent quantum noise cancellation (CQNC) in a hybrid atom-cavity optomechanical setup assisted with squeezed vacuum injection. The force detector, which allows for a continuous, broadband detection of weak forces well below the standard quantum limit (SQL), is formed by a single optical cavity simultaneously coupled to a mechanical oscillator and to an ensemble of ultracold atoms. The latter acts as a negative-mass oscillator so that atomic noise exactly cancels the backaction noise from the mechanical oscillator due to destructive quantum interference. Squeezed vacuum injection enforces this cancellation and allows sub-SQL sensitivity to be reached in a very wide frequency band, and at much lower input laser powers. (paper)

  10. A method for calculation of forces acting on air cooled gas turbine blades based on the aerodynamic theory

    Directory of Open Access Journals (Sweden)

    Grković Vojin R.

    2013-01-01

    Full Text Available The paper presents the mathematical model and the procedure for calculation of the resultant force acting on the air cooled gas turbine blade(s based on the aerodynamic theory and computation of the circulation around the blade profile. In the conducted analysis was examined the influence of the cooling air mass flow expressed through the cooling air flow parameter λc, as well as, the values of the inlet and outlet angles β1 and β2, on the magnitude of the tangential and axial forces. The procedure and analysis were exemplified by the calculation of the tangential and axial forces magnitudes. [Projekat Ministarstva nauke Republike Srbije: Development and building the demonstrative facility for combined heat and power with gasification

  11. Improving the Performance of Hybrid Functional-Based Molecular Dynamics Simulation through Screening of Hartree-Fock Exchange Forces.

    Science.gov (United States)

    von Rudorff, Guido Falk; Jakobsen, Rasmus; Rosso, Kevin M; Blumberger, Jochen

    2017-05-09

    Density functional theory-based molecular dynamics calculations of condensed phase systems often benefit from the use of hybrid functionals. However, their use is computationally very demanding and severely limits the system size and time scale that can be simulated. Several methods have been introduced to accelerate hybrid functional molecular dynamics including Schwarz screening and the auxiliary density matrix method (ADMM). Here we present a simple screening scheme that can be applied in addition to these methods. It works by examining Hartree-Fock exchange (HFX) integrals and subsequently excluding those that contribute very little to any nuclear force component. The resultant force error is corrected by a history-dependent extrapolation scheme. We find that for systems where the calculation of HFX forces is a major bottleneck, a large fraction of the integrals can be neglected without introducing significant errors in the nuclear forces. For instance, for a 2 × 2 × 2 unit cell of CoO, 92% of the HFX integrals that have passed Schwarz screening within the ADMM approach can be neglected leading to a performance gain of a factor of 3 at a negligible error in nuclear forces (≤5 × 10 -4 H bohr -1 ). We also show that total energy conservation and solvation structures are not adversely affected by the screening method.

  12. A pressure-based force and torque prediction technique for the study of fish-like swimming.

    Directory of Open Access Journals (Sweden)

    Kelsey N Lucas

    Full Text Available Many outstanding questions about the evolution and function of fish morphology are linked to swimming dynamics, and a detailed knowledge of time-varying forces and torques along the animal's body is a key component in answering many of these questions. Yet, quantifying these forces and torques experimentally represents a major challenge that to date prevents a full understanding of fish-like swimming. Here, we develop a method for obtaining these force and torque data non-invasively using standard 2D digital particle image velocimetry in conjunction with a pressure field algorithm. We use a mechanical flapping foil apparatus to model fish-like swimming and measure forces and torques directly with a load cell, and compare these measured values to those estimated simultaneously using our pressure-based approach. We demonstrate that, when out-of-plane flows are relatively small compared to the planar flow, and when pressure effects sufficiently dominate shear effects, this technique is able to accurately reproduce the shape, magnitude, and timing of locomotor forces and torques experienced by a fish-like swimmer. We conclude by exploring of the limits of this approach and its feasibility in the study of freely-swimming fishes.

  13. A pressure-based force and torque prediction technique for the study of fish-like swimming.

    Science.gov (United States)

    Lucas, Kelsey N; Dabiri, John O; Lauder, George V

    2017-01-01

    Many outstanding questions about the evolution and function of fish morphology are linked to swimming dynamics, and a detailed knowledge of time-varying forces and torques along the animal's body is a key component in answering many of these questions. Yet, quantifying these forces and torques experimentally represents a major challenge that to date prevents a full understanding of fish-like swimming. Here, we develop a method for obtaining these force and torque data non-invasively using standard 2D digital particle image velocimetry in conjunction with a pressure field algorithm. We use a mechanical flapping foil apparatus to model fish-like swimming and measure forces and torques directly with a load cell, and compare these measured values to those estimated simultaneously using our pressure-based approach. We demonstrate that, when out-of-plane flows are relatively small compared to the planar flow, and when pressure effects sufficiently dominate shear effects, this technique is able to accurately reproduce the shape, magnitude, and timing of locomotor forces and torques experienced by a fish-like swimmer. We conclude by exploring of the limits of this approach and its feasibility in the study of freely-swimming fishes.

  14. Features force between the foot and performance of special-based tests young basketball players

    Directory of Open Access Journals (Sweden)

    S.V. Stroganov

    2013-12-01

    Full Text Available Purpose . A quantitative analysis of biomechanical force interactions between the foot and the support when the athletes special tests. Material and methods . In the experiment involved 30 young athletes aged 7-8 years who are at the stage of initial training. Subjects performed four tests: jump up from their seats repulsion two feet, jump up and down with one foot repulsion run, stop step, jump stop. Results . As a result of studies to obtain quantitative values of reference indices interactions as the maximum reaction force impulse force, force gradient, the reference duration, and other interactions. Revealed that when jumping forward and upward to run and jump and step stops the horizontal component of force production is from 38 to 73 % of the resulting value. Conclusions . Significant power load on the musculoskeletal system and in particular the foot of young basketball players can lead to abnormalities in the foot. In connection with what the training process should include funds for the correction and prevention of foot function.

  15. Practical Considerations for Using Constant Force Springs in Space-Based Mechanisms

    Science.gov (United States)

    Williams, R. Brett; Fisher, Charles D.; Gallon, John C.

    2013-01-01

    Mechanical springs are a common element in mechanism from all walks of life; cars, watches, appliances, and many others. These springs generally exhibit a linear relationship between force and deflection. In small mechanisms, deflections are small so the variation in spring force between one position and another are generally small and do not influence the design or functionality of the device. However, as the spacecraft industry drives towards larger, deployable satellites, the distances a spring or springs must function over can become considerable so much so that the structural integrity of the device may be impacted. As such, an increasingly common mechanism element is the constant force spring- one that provides a constant force regardless of deflection. These elements are commonly in the conceptual design phase to deal with system-level large deflections, but in the detailed design or integration test phase they can pose significant implementation issues. This article addresses some of the detailed issues in order for these constant force springs to be properly designed into space systems.

  16. Estimation of capacities on Florida freeways.

    Science.gov (United States)

    2014-09-01

    Current capacity estimates within Floridas travel time reliability tools rely on the Highway Capacity Manual (HCM 2010) to : estimate capacity under various conditions. Field measurements show that the capacities of Florida freeways are noticeably...

  17. Models of Restoring Force Characteristics for Anchor-Bolt-Yield-Type Exposed Column-Base under Bi-Axial-Bending

    OpenAIRE

    高松,隆夫; 玉井,宏章; 山西,央朗; 松村,高良; 山石,健司

    2009-01-01

    An experimental study of slip-type and non-slip-type exposed column bases subjected to cyclic bi-axial bending moment was made to investigate restoring force characteristics. Based on the test results the following conclusions were drawn: 1) Non-slip-type column bases showed non-slip-type multi-linear cyclic curves, linear from the origin at each loading cycle. 2) Slip-type column bases showed complicated slip-type cyclic curves, especially in 45-degrees cyclic loading because of plastic elon...

  18. Grasping and manipulation of deformable objects based on internal force requirements

    Directory of Open Access Journals (Sweden)

    Sohil Garg

    2008-11-01

    Full Text Available In this paper an analysis of grasping and manipulation of deformable objects by a three finger robot hand has been carried out. It is proved that the required fingertip grasping forces and velocities vary with change in object size due to deformation. The variation of the internal force with the change in fingertip and object contact angle has been investigated in detail. From the results it is concluded that it is very difficult to manipulate an object if the finger contact angle is not between 30 o and 70 o, as the internal forces or velocities become very large outside this range. Hence even if the object is inside the work volume of the three fingers it would still not be possible to manipulate it. A simple control model is proposed which can control the grasping and manipulation of a deformable object. Experimental results are also presented to prove the proposed method.

  19. Magnetic field sensor based on the Ampere's force using dual-polarization DBR fiber laser

    Science.gov (United States)

    Yao, Shuang; Zhang, Yang; Guan, Baiou

    2015-08-01

    A novel magnetic field sensor using distributed Bragg reflector (DBR) fiber laser by Ampere's force effect is proposed and experimentally demonstrated. The key sensing element, that is the dual-polarization DBR fiber laser, is fixed on the middle part of two copper plates which carry the current. Ampere's force is applied onto the coppers due to an external magnetic field generated by a DC solenoid. Thus, the lateral force from the coppers is converted to a corresponding beat frequency signal shift produced by the DBR laser. The electric current sensing is also realized by the same configuration and same principle simultaneously in an intuitive manner. Good agreement between the theory calculation and the experimental results is obtained, which shows a good linearity. This sensor's sensitivity to the magnetic field and to the electric current finally reaches ~258.92 kHz/mT and ~1.08727 MHz/A, respectively.

  20. A novel AFM based method for force measurements between individual hair strands

    International Nuclear Information System (INIS)

    Max, Eva; Haefner, Wolfgang; Wilco Bartels, Frank; Sugiharto, Albert; Wood, Claudia; Fery, Andreas

    2010-01-01

    Interactions between hairs and other natural fibers are of broad interest for both applications and fundamental understanding of biological interfaces. We present a novel method, that allows force measurements between individual hair strands. Hair fragments can be laser-cut without altering their surface chemistry. Subsequently, they are glued onto Atomic force microscopy (AFM) cantilevers. This allows carrying out measurements between the hair fragment and surface immobilized hair in a well-defined crossed-cylinder geometry. Both force-distance and friction measurements are feasible. Measurements in air with controlled humidity and in aqueous environment show clear differences which can be explained by the dominating role of capillary interactions in air. Friction is found to be anisotropic, reflecting the fine structure of hair cuticula. While the investigations are focused on the particular example of human hair, we expect that the approach can be extended to other animal/plant fibers and thus offers perspectives for broad spectrum systems.

  1. Specialized probes based on hydroxyapatite calcium for heart tissues research by atomic force microscopy

    International Nuclear Information System (INIS)

    Zhukov, Mikhail; Golubok, Alexander; Gulyaev, Nikolai

    2016-01-01

    The new specialized AFM-probes with hydroxyapatite structures for atomic force microscopy of heart tissues calcification were created and studied. A process of probe fabrication is demonstrated. The adhesive forces between specialized hydroxyapatite probe and endothelium/subendothelial layers were investigated. It was found that the adhesion forces are significantly higher for the subendothelial layers. We consider that it is connected with the formation and localization of hydroxyapatite in the area of subendothelial layers of heart tissues. In addition, the roughness analysis and structure visualization of the endothelial surface of the heart tissue were carried out. The results show high efficiency of created specialized probes at study a calcinations process of the aortic heart tissues.

  2. Specialized probes based on hydroxyapatite calcium for heart tissues research by atomic force microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Zhukov, Mikhail, E-mail: cloudjyk@yandex.ru; Golubok, Alexander [St. Petersburg National Research University of Information Technologies, Mechanics and Optics (ITMO University), Kronverkskii pr. 49, St. Petersburg, 197101 (Russian Federation); Institute for Analytical Instrumentation, Russian Academy of Sciences (RAS), Rizhskii pr. 26, St. Petersburg, 190103 (Russian Federation); Gulyaev, Nikolai [Military Medical Academy named after S.M. Kirov, Academic Lebedev str. 6, St. Petersburg, 194044 (Russian Federation)

    2016-06-17

    The new specialized AFM-probes with hydroxyapatite structures for atomic force microscopy of heart tissues calcification were created and studied. A process of probe fabrication is demonstrated. The adhesive forces between specialized hydroxyapatite probe and endothelium/subendothelial layers were investigated. It was found that the adhesion forces are significantly higher for the subendothelial layers. We consider that it is connected with the formation and localization of hydroxyapatite in the area of subendothelial layers of heart tissues. In addition, the roughness analysis and structure visualization of the endothelial surface of the heart tissue were carried out. The results show high efficiency of created specialized probes at study a calcinations process of the aortic heart tissues.

  3. A novel AFM based method for force measurements between individual hair strands

    Energy Technology Data Exchange (ETDEWEB)

    Max, Eva; Haefner, Wolfgang [Physical Chemistry II, University of Bayreuth, Universitaetsstrasse 30, 95440 Bayreuth (Germany); Wilco Bartels, Frank [Polymer Physics, Global PU Specialties Research, BASF Polyurethanes GmbH, Elastogranstrasse 60, 49448 Lemfoerde (Germany); Sugiharto, Albert [Polymer Physics and Analytics, G201, 67056 Ludwigshafen (Germany); Wood, Claudia [Care Chemicals and Formulators, Personal Care Ingredients, New Business and Application Development, BASF SE, E-EMV/GP - H201, 67056 Ludwigshafen (Germany); Fery, Andreas, E-mail: andreas.fery@uni-bayreuth.de [Physical Chemistry II, University of Bayreuth, Universitaetsstrasse 30, 95440 Bayreuth (Germany)

    2010-03-15

    Interactions between hairs and other natural fibers are of broad interest for both applications and fundamental understanding of biological interfaces. We present a novel method, that allows force measurements between individual hair strands. Hair fragments can be laser-cut without altering their surface chemistry. Subsequently, they are glued onto Atomic force microscopy (AFM) cantilevers. This allows carrying out measurements between the hair fragment and surface immobilized hair in a well-defined crossed-cylinder geometry. Both force-distance and friction measurements are feasible. Measurements in air with controlled humidity and in aqueous environment show clear differences which can be explained by the dominating role of capillary interactions in air. Friction is found to be anisotropic, reflecting the fine structure of hair cuticula. While the investigations are focused on the particular example of human hair, we expect that the approach can be extended to other animal/plant fibers and thus offers perspectives for broad spectrum systems.

  4. Virtual Control of Prosthetic Hand Based on Grasping Patterns and Estimated Force from Semg

    Directory of Open Access Journals (Sweden)

    Zhu Gao-Ke

    2016-01-01

    Full Text Available Myoelectric prosthetic hands aim to serve upper limb amputees. The myoelectric control of the hand grasp action is a kind of real-time or online method. Thus it is of great necessity to carry on a study of online prosthetic hand electrical control. In this paper, the strategy of simultaneous EMG decoding of grasping patterns and grasping force was realized by controlling a virtual multi-degree-freedom prosthetic hand and a real one-degree-freedom prosthetic hand simultaneously. The former realized the grasping patterns from the recognition of the sEMG pattern. The other implemented the grasping force from sEMG force decoding. The results show that the control method is effective and feasible.

  5. Estimation of single plane unbalance parameters of a rotor-bearing system using Kalman filtering based force estimation technique

    Science.gov (United States)

    Shrivastava, Akash; Mohanty, A. R.

    2018-03-01

    This paper proposes a model-based method to estimate single plane unbalance parameters (amplitude and phase angle) in a rotor using Kalman filter and recursive least square based input force estimation technique. Kalman filter based input force estimation technique requires state-space model and response measurements. A modified system equivalent reduction expansion process (SEREP) technique is employed to obtain a reduced-order model of the rotor system so that limited response measurements can be used. The method is demonstrated using numerical simulations on a rotor-disk-bearing system. Results are presented for different measurement sets including displacement, velocity, and rotational response. Effects of measurement noise level, filter parameters (process noise covariance and forgetting factor), and modeling error are also presented and it is observed that the unbalance parameter estimation is robust with respect to measurement noise.

  6. Dependence of Force Produced by Polypyrrole Based Artificial Muscles on Ionic Species Involved

    DEFF Research Database (Denmark)

    Careem, M.A.; Vidanapathirana, K.P.; Skaarup, Steen

    2004-01-01

    Artificial muscles have been fabricated in the form bilayer strips using an insulating polymer layer and polypyrrole (PPy) conducting polymer film, and the force produced by them during redox processes have been investigated. This study reports the effects of anions in the polymerization electrol......Artificial muscles have been fabricated in the form bilayer strips using an insulating polymer layer and polypyrrole (PPy) conducting polymer film, and the force produced by them during redox processes have been investigated. This study reports the effects of anions in the polymerization...

  7. 78 FR 43881 - Florida Petroleum Reprocessors Site, Davie, Broward County, Florida; Notice of Settlement

    Science.gov (United States)

    2013-07-22

    ... AGENCY Florida Petroleum Reprocessors Site, Davie, Broward County, Florida; Notice of Settlement AGENCY... Protection Agency has entered into a settlement with Jap. Tech, Inc. concerning the Florida Petroleum... Ms. Paula V. Painter. Submit your comments by Site name Florida Petroleum Reprocesssors Site by one...

  8. Quantum mechanics based force field for carbon (QMFF-Cx) validated to reproduce the mechanical and thermodynamics properties of graphite

    Science.gov (United States)

    Pascal, Tod A.; Karasawa, Naoki; Goddard, William A.

    2010-10-01

    As assemblies of graphene sheets, carbon nanotubes, and fullerenes become components of new nanotechnologies, it is important to be able to predict the structures and properties of these systems. A problem has been that the level of quantum mechanics practical for such systems (density functional theory at the PBE level) cannot describe the London dispersion forces responsible for interaction of the graphene planes (thus graphite falls apart into graphene sheets). To provide a basis for describing these London interactions, we derive the quantum mechanics based force field for carbon (QMFF-Cx) by fitting to results from density functional theory calculations at the M06-2X level, which demonstrates accuracies for a broad class of molecules at short and medium range intermolecular distances. We carried out calculations on the dehydrogenated coronene (C24) dimer, emphasizing two geometries: parallel-displaced X (close to the observed structure in graphite crystal) and PD-Y (the lowest energy transition state for sliding graphene sheets with respect to each other). A third, eclipsed geometry is calculated to be much higher in energy. The QMFF-Cx force field leads to accurate predictions of available experimental mechanical and thermodynamics data of graphite (lattice vibrations, elastic constants, Poisson ratios, lattice modes, phonon dispersion curves, specific heat, and thermal expansion). This validates the use of M06-2X as a practical method for development of new first principles based generations of QMFF force fields.

  9. A force measurement system based on an electrostatic sensing and actuating technique for calibrating force in a micronewton range with a resolution of nanonewton scale

    International Nuclear Information System (INIS)

    Chen, Sheng-Jui; Pan, Sheau-Shi

    2011-01-01

    This paper introduces a force measurement system recently established at the Center for Measurement Standards, Industrial Technology Research Institute for calibrating forces in a micronewton range with a resolution of a few nanonewtons. The force balance consists of a monolithic flexure stage and a specially made capacitor for electrostatic sensing and actuating. The capacitor is formed by three electrodes which can be utilized as a capacitive position sensor and an electrostatic force actuator at the same time. Force balance control is implemented with a digital controller by which the signal of the stage deflection is acquired, filtered and fed back to the electrostatic force driver to bring the flexure stage to the null position. The detailed description of the apparatus including the design of a monolithic flexure stage, principle of capacitive position sensing/electrostatic actuation and the force balance control is given in the paper. Finally, we present the results of electrostatic force calibration and the weighing of a 1 mg wire weight

  10. Hydrology of Southeast Florida and Associated Topics.

    Science.gov (United States)

    Monsour, William, Comp.; Moyer, Maureen, Comp.

    This booklet deals with the hydrology of southeastern Florida. It is designed to provide the citizen, teacher, or student with hydrological information, to promote an understanding of water resources, and to initiate conservation practices within Florida communities. The collection of articles within the booklet deal with Florida water resources…

  11. Introduction of a computer-based method for automated planning of reduction paths under consideration of simulated muscular forces.

    Science.gov (United States)

    Buschbaum, Jan; Fremd, Rainer; Pohlemann, Tim; Kristen, Alexander

    2017-08-01

    Reduction is a crucial step in the surgical treatment of bone fractures. Finding an optimal path for restoring anatomical alignment is considered technically demanding because collisions as well as high forces caused by surrounding soft tissues can avoid desired reduction movements. The repetition of reduction movements leads to a trial-and-error process which causes a prolonged duration of surgery. By planning an appropriate reduction path-an optimal sequence of target-directed movements-these problems should be overcome. For this purpose, a computer-based method has been developed. Using the example of simple femoral shaft fractures, 3D models are generated out of CT images. A reposition algorithm aligns both fragments by reconstructing their broken edges. According to the criteria of a deduced planning strategy, a modified A*-algorithm searches collision-free route of minimal force from the dislocated into the computed target position. Muscular forces are considered using a musculoskeletal reduction model (OpenSim model), and bone collisions are detected by an appropriate method. Five femoral SYNBONE models were broken into different fracture classification types and were automatically reduced from ten randomly selected displaced positions. Highest mean translational and rotational error for achieving target alignment is [Formula: see text] and [Formula: see text]. Mean value and standard deviation of occurring forces are [Formula: see text] for M. tensor fasciae latae and [Formula: see text] for M. semitendinosus over all trials. These pathways are precise, collision-free, required forces are minimized, and thus regarded as optimal paths. A novel method for planning reduction paths under consideration of collisions and muscular forces is introduced. The results deliver additional knowledge for an appropriate tactical reduction procedure and can provide a basis for further navigated or robotic-assisted developments.

  12. Force Concept Inventory-based multiple-choice test for investigating students’ representational consistency

    Directory of Open Access Journals (Sweden)

    Pasi Nieminen

    2010-08-01

    Full Text Available This study investigates students’ ability to interpret multiple representations consistently (i.e., representational consistency in the context of the force concept. For this purpose we developed the Representational Variant of the Force Concept Inventory (R-FCI, which makes use of nine items from the 1995 version of the Force Concept Inventory (FCI. These original FCI items were redesigned using various representations (such as motion map, vectorial and graphical, yielding 27 multiple-choice items concerning four central concepts underpinning the force concept: Newton’s first, second, and third laws, and gravitation. We provide some evidence for the validity and reliability of the R-FCI; this analysis is limited to the student population of one Finnish high school. The students took the R-FCI at the beginning and at the end of their first high school physics course. We found that students’ (n=168 representational consistency (whether scientifically correct or not varied considerably depending on the concept. On average, representational consistency and scientifically correct understanding increased during the instruction, although in the post-test only a few students performed consistently both in terms of representations and scientifically correct understanding. We also compared students’ (n=87 results of the R-FCI and the FCI, and found that they correlated quite well.

  13. Rolling Force Prediction in Heavy Plate Rolling Based on Uniform Differential Neural Network

    Directory of Open Access Journals (Sweden)

    Fei Zhang

    2016-01-01

    Full Text Available Accurate prediction of the rolling force is critical to assuring the quality of the final product in steel manufacturing. Exit thickness of plate for each pass is calculated from roll gap, mill spring, and predicted roll force. Ideal pass scheduling is dependent on a precise prediction of the roll force in each pass. This paper will introduce a concept that allows obtaining the material model parameters directly from the rolling process on an industrial scale by the uniform differential neural network. On the basis of the characteristics that the uniform distribution can fully characterize the solution space and enhance the diversity of the population, uniformity research on differential evolution operator is made to get improved crossover with uniform distribution. When its original function is transferred with a transfer function, the uniform differential evolution algorithms can quickly solve complex optimization problems. Neural network structure and weights threshold are optimized by uniform differential evolution algorithm, and a uniform differential neural network is formed to improve rolling force prediction accuracy in process control system.

  14. Environmental Impact Statement (EIS) for the Airspace Training Initiative Shaw Air Force Base, South Carolina

    Science.gov (United States)

    2011-12-09

    techniques. These constraints would not exist in an actual combat situation, and such constrained training teaches habits that can be...Source (MAILS) Dispersion Model User’s Guide. Oak Ridge National Laboratory, Air Force Engineering & Services Center. ESL -TR-89-59, Tyndall AFB

  15. Final Environmental Assessment: Mental Health Clinic Hanscom Air Force Base Massachusetts

    Science.gov (United States)

    2010-08-19

    at the MIT Lincoln Laboratory and the Air Force Research Library (AFRL). Hazardous wastes, including adhesives, sealants , greases, waste paint and...There is an IAP located in the Dental Clinic at Building 1900. Amalgam waste is generated from dental operations and transferred to the 90-day

  16. The Privatization of the Aerospace Guidance and Metrology Center at Newark Air Force Base

    National Research Council Canada - National Science Library

    Fillman, Richard

    1999-01-01

    .... This was a first of a kind for the DoD repair depot system. The justification was too much excess depot capacity and by closing Newark the Air Force would rid itself of this excess capacity and obtain savings by privatizing the repair workload...

  17. Environmental Assessment for Tinker Aerospace Complex Tinker Air Force Base, Oklahoma

    Science.gov (United States)

    2008-05-01

    meet the Air Force Legal Facilities Design Guide and has poor indoor air quality. There are problems with mold , wood rot and the building has...grass Sorghastrum nutans Western ironweed Vernonia baldwinii Johnson grass Sorghum halepense Little blue stem Schijzachyrium

  18. Environmental Assessment for the Integrated Natural Resources Management Plan for Edwards Air Force Base, California

    Science.gov (United States)

    2015-02-13

    Force EIAP. 2. Partner with private organizations 3. Manage fishing and volunteer program 4. Provide ongoing interpretive education to students 5...natural resources and the environment. Global warming is projected to have detrimental effects on industries, including agriculture and tourism ...educational, family, economic, military, religious, and recreational/ leisure . 3 Defined ways of life encompass subsistence hunting and fishing

  19. On Optimizing Steering Performance of Multi-axle Vehicle Based on Driving Force Control

    Directory of Open Access Journals (Sweden)

    Wu Zhicheng

    2017-01-01

    Full Text Available The steering performance of multi-axle vehicle with independent driving system is affected by the distribution of the wheel driving force. A nonlinear vehicle dynamics model including magic formula tire model for describing 11 DoF four-axle vehicle with dual-front-axle-steering (DFAS system was presented. The influence of different driving force distribution scheme on the steering performance of the vehicle was analyzed. A control strategy for improving the steady response and transient response of the vehicle steering is proposed. The results show: For the steady response, setting different drive force for internal and external wheels according to the actual steering characteristics of the vehicle can effectively improve its steering characteristics; For the transient response, adopting the zero sideslip angle control strategy and using the PID control algorithm to control the driving force of the outside wheel of tear-two-axle, under angle step input, the vehicle sideslip angle can quickly stabilize to 0 and yaw rate also significantly decreases.

  20. Hierarchical Networks of Casein Proteins: An Elasticity Study Based on Atomic Force Microscopy

    NARCIS (Netherlands)

    Uricanu, V.I.; Duits, Michael H.G.; Mellema, J.

    2004-01-01

    2D- and 3D-atomic force microscopy (AFM) experiments were performed on single casein micelles (CM) in native state, submerged in liquid, using a home-built AFM instrument. The micelles were immobilized via carbodiimide chemistry to a self-assembled monolayer supported on gold-coated slides. Off-line