WorldWideScience

Sample records for food processing final

  1. Combination processes for food irradiation. Proceedings of the final research co-ordination meeting

    1998-01-01

    There is an increasing consumer demand for food that is safe, minimally processed, visually attractive, full flavoured, nutritious, and convenient to prepare and serve, that has fewer preservatives, and that is available throughout the year at an affordable cost. Consumer concern and regulatory restrictions on the use of preservatives and pesticides in food are adversely affecting international trade in many food products. As a result, minimally processed, chilled foods and ready to eat foods are increasingly being marketed to satisfy consumer demand in both developed and developing countries. However, such foods could introduce new microbiological risks to the population, especially to those who are immunocompromised or generally at risk (children, pregnant women, the elderly, etc.). In view of these factors, a 5 year Co-ordinated Research Programme (CRP) on Irradiation in Combination with Other Processes for Improving Food Quality was initiated in 1991 by the Food and Agriculture Organization of the United Nations and the International Atomic Energy Agency through their Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture. The objectives of this CRP were to evaluate: 1) Combination treatment involving irradiation in order to extend the self-life of meat, seafood, fruits and vegetables at refrigeration temperatures and under ambient conditions; 2) Combination treatment involving irradiation in order to ensure the microbiological safety of foods, both individual and composite, including prepared meals; 3) Shelf-life extension of chilled, prepared meals and the development of shelf stable food and food components through combination treatment involving irradiation; 4) Energy requirements of combination processes involving irradiation in comparison to other food processes. Scientists from 14 countries participated in the CRP by carrying out the work under Research Contracts and Agreements with the Joint FAO/IAEA Division. The first Research Co

  2. The production of fuels and chemicals from food processing wastes & cellulosics. Final research report

    Dale, M.C.; Okos, M.; Burgos, N. [and others

    1997-06-15

    High strength food wastes of about 15-20 billion pounds solids are produced annually by US food producers. Low strength food wastes of 5-10 billion pounds/yr. are produced. Estimates of the various components of these waste streams are shown in Table 1. Waste paper/lignocellulosic crops could produce 2 to 5 billion gallons of ethanol per year or other valuable chemicals. Current oil imports cost the US about $60 billion dollars/yr. in out-going balance of trade costs. Many organic chemicals that are currently derived from petroleum can be produced through fermentation processes. Petroleum based processes have been preferred over biotechnology processes because they were typically cheaper, easier, and more efficient. The technologies developed during the course of this project are designed to allow fermentation based chemicals and fuels to compete favorably with petroleum based chemicals. Our goals in this project have been to: (1) develop continuous fermentation processes as compared to batch operations; (2) combine separation of the product with the fermentation, thus accomplishing the twin goals of achieving a purified product from a fermentation broth and speeding the conversion of substrate to product in the fermentation broth; (3) utilize food or cellulosic waste streams which pose a current cost or disposal problem as compared to high cost grains or sugar substrates; (4) develop low energy recovery methods for fermentation products; and finally (5) demonstrate successful lab scale technologies on a pilot/production scale and try to commercialize the processes. The scale of the wastes force consideration of {open_quotes}bulk commodity{close_quotes} type products if a high fraction of the wastes are to be utilized.

  3. Food processing

    Teodorowicz, Malgorzata; Neerven, Van Joost; Savelkoul, Huub

    2017-01-01

    The majority of foods that are consumed in our developed society have been processed. Processing promotes a non-enzymatic reaction between proteins and sugars, the Maillard reaction (MR). Maillard reaction products (MRPs) contribute to the taste, smell and color of many food products, and thus

  4. Geothermal absorption refrigeration for food processing industries. Final report, December 13, 1976--November 13, 1977

    Harris, R.L.; Olson, G.K.; Mah, C.S.; Bujalski, J.H.

    1977-11-01

    The first step in the economic analysis of the integration of geothermally powered absorption refrigeration into a food processing plant was an evaluation of the potential geothermal sites in the Western United States. The evaluation covered availability of raw materials, transportation, adequate geothermal source, labor, and other requirements for food processing plants. Several attractive geothermal sites were identified--Raft River, Idaho; Sespe Hot Springs, California; Vale Hot Springs, Oregon; Weisler-Crane Creek, Idaho; Cosco Hot Springs, California; and the Imperial Valley, California. The most economically attractive food processing industry was then matched to the site based on its particular energy, raw material, and transportation requirements. The more promising food processors identified were for frozen potato or vegetable products, freeze-dried products, and meat processing. For the refrigeration temperature range of +32/sup 0/F to -40/sup 0/F and geothermal temperature range of 212/sup 0/F to 300/sup 0/F, an absorption refrigeration system had to be identified, designed, and evaluated. Both the conventional ammonia/water and an organic absorption refrigeration system using monochlorodifluoromethane (R-22) as the refrigerant and dimethyl formamide (DMF) as the absorbent were studied. In general, only a 60/sup 0/F to 100/sup 0/F temperature drop would be effectively used for refrigeration leaving the remainder of the allowable temperature drop available for other use. The economic evaluation of the geothermal system installed in a food processing plant required the comparison of several principal alternatives. These alternatives were evaluated for three different food processing plants located at their optimum geothermal site: a forzen potato product processing plant located at Raft River, Idaho; a freeze-dried product plant located at Sespe Hot Springs, California; a beef slaughter operation located in the Imperial Valley of California. (JGB)

  5. APPLICATIONS OF THERMAL ENERGY STORAGE TO WASTE HEAT RECOVERY IN THE FOOD PROCESSING INDUSTRY, Final Report

    Lundberg, W. L.; Christenson, James A.

    1979-07-31

    A project is discussed in which the possibilities for economical waste heat recovery and utilization in the food industry were examined. Waste heat availability and applications surveys were performed at two manufacturing plants engaged in low temperature (freezing) and high temperature (cooking, sterilizing, etc.) food processing. The surveys indicate usable waste heat is available in significant quantities which could be applied to existing, on-site energy demands resulting in sizable reductions in factory fuel and energy usage. At the high temperature plant, the energy demands involve the heating of fresh water for boiler make-up, for the food processes and for the daily clean-up operation. Clean-up poses an opportunity for thermal energy storage since waste heat is produced during the one or two production shifts of each working day while the major clean-up effort does not occur until food production ends. At the frozen food facility, the clean-up water application again exists and, in addition, refrigeration waste heat could also be applied to warm the soil beneath the ground floor freezer space. Systems to recover and apply waste heat in these situations were developed conceptually and thermal/economic performance predictions were obtained. The results of those studies indicate the economics of waste heat recovery can be attractive for facilities with high energy demand levels. Small factories, however, with relatively low energy demands may find the economics marginal although, percentagewise, the fuel and energy savings are appreciable.

  6. California Food Processing Industry Wastewater Demonstration Project: Phase I Final Report

    Lewis, Glen; Atkinson, Barbara; Rhyne, Ivin

    2009-09-09

    Wastewater treatment is an energy-intensive process and electricity demand is especially high during the utilities summer peak electricity demand periods. This makes wastewater treatment facilities prime candidates for demand response programs. However, wastewater treatment is often peripheral to food processing operations and its demand response opportunities have often been overlooked. Phase I of this wastewater demonstration project monitored wastewater energy and environmental data at Bell-Carter Foods, Inc., California's largest olive processing plant. For this monitoring activity the project team used Green Energy Management System (GEMS) automated enterprise energy management (EEM) technologies. This report presents results from data collected by GEMS from September 15, 2008 through November 30, 2008, during the olive harvest season. This project established and tested a methodology for (1) gathering baseline energy and environmental data at an industrial food-processing plant and (2) using the data to analyze energy efficiency, demand response, daily peak load management, and environmental management opportunities at the plant. The Phase I goals were to demonstrate the measurement and interrelationship of electricity demand, electricity usage, and water quality metrics and to estimate the associated CO{sub 2} emissions.

  7. Irradiation in the production, processing and handling of food. Final rule.

    2012-11-30

    The Food and Drug Administration (FDA) is amending the food additive regulations to provide for the safe use of a 4.5 kilogray (kGy) maximum absorbed dose of ionizing radiation to treat unrefrigerated (as well as refrigerated) uncooked meat, meat byproducts, and certain meat food products to reduce levels of foodborne pathogens and extend shelf life. This action is in response to a petition filed by the U.S. Department of Agriculture, Food Safety and Inspection Service (USDA/FSIS).

  8. NKS FOOD Final report

    Eikelmann, I.M.H.

    2011-11-01

    The purpose of the workshop was to share national practice and experience on the use of different tools (handbooks, late phase models etc.) during a crisis with focus on operational implementation and use, interpretation and verification of results and production of decision basis. The main goal was to establish a common ground to better understand how these are used in the different countries, identify differences and exchange knowledge to increase competence. Second goal was to gather stakeholders and authorities with interest or responsibility for countermeasures against radioactive contamination of food products to share experience in different topics as: 1) Cooperation among stakeholders and organisations responsible for food safety in each country. 2) Adaptation of the Euranos handbook ''Countermeasures for the management of food production systems'' to national conditions and implementation of the handbook in each country. 3) Establishing a Nordic network for food authorities and radiation protection authorities responsible for food safety with respect to radioactivity. There were 23 participants representing all the Nordic countries. Some of the speakers present were Klas Rosen (SLU), Kasper Andersson (RISOe), representatives from the Nordic food authorities and Ministries, representatives from the radiation protection authorities and one speaker from the food industry. (Author)

  9. NKS FOOD Final report

    Eikelmann, I.M.H. (ed.) (Norwegian Radiation Protection Authority, OEsteraas (Norway))

    2011-11-15

    The purpose of the workshop was to share national practice and experience on the use of different tools (handbooks, late phase models etc.) during a crisis with focus on operational implementation and use, interpretation and verification of results and production of decision basis. The main goal was to establish a common ground to better understand how these are used in the different countries, identify differences and exchange knowledge to increase competence. Second goal was to gather stakeholders and authorities with interest or responsibility for countermeasures against radioactive contamination of food products to share experience in different topics as: 1) Cooperation among stakeholders and organisations responsible for food safety in each country. 2) Adaptation of the Euranos handbook ''Countermeasures for the management of food production systems'' to national conditions and implementation of the handbook in each country. 3) Establishing a Nordic network for food authorities and radiation protection authorities responsible for food safety with respect to radioactivity. There were 23 participants representing all the Nordic countries. Some of the speakers present were Klas Rosen (SLU), Kasper Andersson (RISOE), representatives from the Nordic food authorities and Ministries, representatives from the radiation protection authorities and one speaker from the food industry. (Author)

  10. ALINET: a model for assessing energy conservation opportunities in the food processing industry. Final technical report, September 1977-December 1979

    Levis, A H; Ducot, E R; Levis, I S; Webster, T F

    1979-12-01

    ALINET is a network model designed for the analysis of energy use in the food processing and distribution sector and for the evaluation of the potential effectiveness of energy conserving technologies. The conceptual framework of the model, as well as the design and implementation of the computer software are described. The wheat system at the national, state, and facility-specific level is used to illustrate the model's operation and use. A pilot project, carried out in cooperation with industry, is described in which energy use in (a) hard wheat milling, and (b) durum milling and pasta manufacture is analyzed. Finally, the introduction of an alternative technology for pasta drying is assessed in terms of energy conservation and cost. Recommendation for further applications and institutionalization of the model are made.

  11. New trends in food processing.

    Señorans, Javier; Ibáñez, Elena; Cifuentes, Alejandro

    2003-01-01

    In this work some of the newest trends in food processing are reviewed. This revision intends to provide an updated overview (including works published until February 2001) on the newest food processes, including food manufacturing, preservation, and control. Modern processes for food and food ingredients manufacturing based on membrane technology, super-critical fluid technology, and some applications of biotechnology are presented, mainly applied to obtain functional foods, "all-natural" enriched foods, probiotics and prebiotics. Also included is a critical assessment concerning non-thermal preservation techniques used for food preservation, such as high hydrostatic pressure, pulsed electric fields, ultrasound, pulsed light, hurdle systems, etc. Finally, a group of new analytical techniques (i.e., molecular techniques such as Polymerase Chain Reaction (PCR), food image analysis, and biosensors) and their use for food and process control is reviewed.

  12. Food irradiation with emphasis on process control and acceptance in Asia. Proceedings of a final research co-ordination meeting

    NONE

    1996-04-01

    The third phase of the Asian Regional Cooperative Project on Food Irradiation RPFI (Phase III) emphasized process control of pilot- and commercial scale irradiation of food according to the principle of the Codex General Standard for Irradiated Foods, and on gaining the acceptance of the process by governments, food industry and consumers. Phase III of the RPFI was funded by UNDP and was in operation from 1989-1993. Fifteen institutions in Australia, Bangladesh, China, India, Indonesia, Japan, the Republic of Korea, Pakistan, Philippines, Sri Lanka, Thailand and Viet Nam participated. Proper process control of irradiation with emphasis on dosimetry techniques was emphasized. A number of market testing, transportation trials and consumer acceptance studies was carried out during this period. Refs, figs, tabs.

  13. Radiation processing for safe, shelf-stable and ready-to-eat food. Proceedings of a final research co-ordination meeting

    2003-01-01

    The increasingly busy lifestyles of populations in many countries have driven the demand for safe, convenient and ready-to-eat food. Traditional food processes such as drying, canning or refrigeration offer a partial solution to this demand as the sensory quality of such food may be significantly affected or the products may be contaminated by pathogenic bacteria during preparation. For developing countries, safe shelf-stable food without the need for refrigeration would offer advantages. In addition, the increasing number of immuno-compromised populations in many countries requires a new approach to food safety to meet their needs. Irradiation offers a potential to enhance microbiological safety and quality of food through shelf-life extension. The benefits of irradiation as a sanitary treatment of many types of food are well known, some of which are applied commercially in several countries. Little data were available, however, on the effect of irradiation on minimally processed food and composite food including prepared meals. A Co-ordinated Research Project (CRP) on the Development of Safe, Shelf-Stable and Ready-to-Eat Food through Radiation Processing therefore was implemented by the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture in 1996 to evaluate the role of irradiation for such food. The results were encouraging as irradiation offers promise as a sanitary treatment to ensure microbiological safety and shelf-life extension of several types of food products including pre-cut vegetables and some sous-vide meals, chilled ready-prepared meals, chilled ready-to-eat meat products, food for immuno-compromised patients/populations, sterile meals, ready-to-eat-food of intermediate moisture content. This publication presents the research results reported at the final Research Co-ordination meeting on this CRP held in Saint Hyacinthe, Quebec, Canada, 10-14 July 2000

  14. Radiation processing for safe, shelf-stable and ready-to-eat food. Proceedings of a final research co-ordination meeting

    NONE

    2003-01-01

    The increasingly busy lifestyles of populations in many countries have driven the demand for safe, convenient and ready-to-eat food. Traditional food processes such as drying, canning or refrigeration offer a partial solution to this demand as the sensory quality of such food may be significantly affected or the products may be contaminated by pathogenic bacteria during preparation. For developing countries, safe shelf-stable food without the need for refrigeration would offer advantages. In addition, the increasing number of immuno-compromised populations in many countries requires a new approach to food safety to meet their needs. Irradiation offers a potential to enhance microbiological safety and quality of food through shelf-life extension. The benefits of irradiation as a sanitary treatment of many types of food are well known, some of which are applied commercially in several countries. Little data were available, however, on the effect of irradiation on minimally processed food and composite food including prepared meals. A Co-ordinated Research Project (CRP) on the Development of Safe, Shelf-Stable and Ready-to-Eat Food through Radiation Processing therefore was implemented by the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture in 1996 to evaluate the role of irradiation for such food. The results were encouraging as irradiation offers promise as a sanitary treatment to ensure microbiological safety and shelf-life extension of several types of food products including pre-cut vegetables and some sous-vide meals, chilled ready-prepared meals, chilled ready-to-eat meat products, food for immuno-compromised patients/populations, sterile meals, ready-to-eat-food of intermediate moisture content. This publication presents the research results reported at the final Research Co-ordination meeting on this CRP held in Saint Hyacinthe, Quebec, Canada, 10-14 July 2000.

  15. Food Process Engineering

    Friis, Alan; Jensen, Bo Boye Busk; Risum, Jørgen

    to calculate the requirements of heat processing. Our goal is to put food engineering into a production context. Other courses teach food chemistry, food microbiology and food technology. Topics of great importance and all have to be seen in a broader context of producing good and safe food in a large scale...

  16. Food-Processing Wastes.

    Frenkel, Val S; Cummings, Gregg A; Maillacheruvu, K Y; Tang, Walter Z

    2017-10-01

    Literature published in 2016 and early 2017 related to food processing wastes treatment for industrial applications are reviewed. This review is a subsection of the Treatment Systems section of the annual Water Environment Federation literature review and covers the following food processing industries and applications: general, meat and poultry, fruits and vegetables, dairy and beverage, and miscellaneous treatment of food wastes.

  17. Food processing in action

    Radio frequency (RF) heating is a commonly used food processing technology that has been applied for drying and baking as well as thawing of frozen foods. Its use in pasteurization, as well as for sterilization and disinfection of foods, is more limited. This column will review various RF heating ap...

  18. Economic analysis of wind-powered refrigeration cooling/water-heating systems in food processing. Final report

    Garling, W.S.; Harper, M.R.; Merchant-Geuder, L.; Welch, M.

    1980-03-01

    Potential applications of wind energy include not only large central turbines that can be utilized by utilities, but also dispersed systems for farms and other applications. The US Departments of Energy (DOE) and Agriculture (USDA) currently are establishing the feasibility of wind energy use in applications where the energy can be used as available, or stored in a simple form. These applications include production of hot water for rural sanitation, heating and cooling of rural structures and products, drying agricultural products, and irrigation. This study, funded by USDA, analyzed the economic feasibility of wind power in refrigeration cooling and water heating systems in food processing plants. Types of plants included were meat and poultry, dairy, fruit and vegetable, and aquaculture.

  19. Organic food processing

    Kahl, Johannes; Alborzi, Farnaz; Beck, Alexander

    2014-01-01

    In 2007 EU Regulation (EC) 834/2007 introduced principles and criteria for organic food processing. These regulations have been analysed and discussed in several scientific publications and research project reports. Recently, organic food quality was described by principles, aspects and criteria....... These principles from organic agriculture were verified and adapted for organic food processing. Different levels for evaluation were suggested. In another document, underlying paradigms and consumer perception of organic food were reviewed against functional food, resulting in identifying integral product...... identity as the underlying paradigm and a holistic quality view connected to naturalness as consumers' perception of organic food quality. In a European study, the quality concept was applied to the organic food chain, resulting in a problem, namely that clear principles and related criteria were missing...

  20. Novel food processing techniques

    Vesna Lelas

    2006-12-01

    Full Text Available Recently, a lot of investigations have been focused on development of the novel mild food processing techniques with the aim to obtain the high quality food products. It is presumed also that they could substitute some of the traditional processes in the food industry. The investigations are primarily directed to usage of high hydrostatic pressure, ultrasound, tribomechanical micronization, microwaves, pulsed electrical fields. The results of the scientific researches refer to the fact that application of some of these processes in particular food industry can result in lots of benefits. A significant energy savings, shortening of process duration, mild thermal conditions, food products with better sensory characteristics and with higher nutritional values can be achieved. As some of these techniques act also on the molecular level changing the conformation, structure and electrical potential of organic as well as inorganic materials, the improvement of some functional properties of these components may occur. Common characteristics of all of these techniques are treatment at ambient or insignificant higher temperatures and short time of processing (1 to 10 minutes. High hydrostatic pressure applied to various foodstuffs can destroy some microorganisms, successfully modify molecule conformation and consequently improve functional properties of foods. At the same time it acts positively on the food products intend for freezing. Tribomechanical treatment causes micronization of various solid materials that results in nanoparticles and changes in structure and electrical potential of molecules. Therefore, the significant improvement of some rheological and functional properties of materials occurred. Ultrasound treatment proved to be potentially very successful technique of food processing. It can be used as a pretreatment to drying (decreases drying time and improves functional properties of food, as extraction process of various components

  1. Radiation processing of food

    Saint-Lebe, L.; Raffi, J.

    1983-06-01

    The ionizing radiations available for food processing are defined, their mode of action and principal effects are described. Toxicological studies (animal tests, radiochemistry) concerning irradiated food are reviewed. The characteristics of the irradiation procedure and the prospects of its industrial development in France are presented [fr

  2. Agriculture and food processing

    Muhammad Lebai Juri

    2003-01-01

    This chapter discuss the application of nuclear technology in agriculture sector. Nuclear Technology has help agriculture and food processing to develop tremendously. Two techniques widely use in both clusters are ionization radiation and radioisotopes. Among techniques for ionizing radiation are plant mutation breeding, SIT and food preservation. Meanwhile radioisotopes use as a tracer for animal research, plant soil relations water sedimentology

  3. Food processing and allergenicity.

    Verhoeckx, Kitty C M; Vissers, Yvonne M; Baumert, Joseph L; Faludi, Roland; Feys, Marcel; Flanagan, Simon; Herouet-Guicheney, Corinne; Holzhauser, Thomas; Shimojo, Ryo; van der Bolt, Nieke; Wichers, Harry; Kimber, Ian

    2015-06-01

    Food processing can have many beneficial effects. However, processing may also alter the allergenic properties of food proteins. A wide variety of processing methods is available and their use depends largely on the food to be processed. In this review the impact of processing (heat and non-heat treatment) on the allergenic potential of proteins, and on the antigenic (IgG-binding) and allergenic (IgE-binding) properties of proteins has been considered. A variety of allergenic foods (peanuts, tree nuts, cows' milk, hens' eggs, soy, wheat and mustard) have been reviewed. The overall conclusion drawn is that processing does not completely abolish the allergenic potential of allergens. Currently, only fermentation and hydrolysis may have potential to reduce allergenicity to such an extent that symptoms will not be elicited, while other methods might be promising but need more data. Literature on the effect of processing on allergenic potential and the ability to induce sensitisation is scarce. This is an important issue since processing may impact on the ability of proteins to cause the acquisition of allergic sensitisation, and the subject should be a focus of future research. Also, there remains a need to develop robust and integrated methods for the risk assessment of food allergenicity. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

  4. Food Processing Control

    1997-01-01

    When NASA started plarning for manned space travel in 1959, the myriad challenges of sustaining life in space included a seemingly mundane but vitally important problem: How and what do you feed an astronaut? There were two main concerns: preventing food crumbs from contaminating the spacecraft's atmosphere or floating into sensitive instruments, and ensuring complete freedom from potentially catastrophic disease-producing bacteria, viruses, and toxins. To solve these concerns, NASA enlisted the help of the Pillsbury Company. Pillsbury quickly solved the first problem by coating bite-size foods to prevent crumbling. They developed the hazard analysis and critical control point (HACCP) concept to ensure against bacterial contamination. Hazard analysis is a systematic study of product, its ingredients, processing conditions, handling, storage, packing, distribution, and directions for consumer use to identify sensitive areas that might prove hazardous. Hazard analysis provides a basis for blueprinting the Critical Control Points (CCPs) to be monitored. CCPs are points in the chain from raw materials to the finished product where loss of control could result in unacceptable food safety risks. In early 1970, Pillsbury plants were following HACCP in production of food for Earthbound consumers. Pillsbury's subsequent training courses for Food and Drug Administration (FDA) personnel led to the incorporation of HACCP in the FDA's Low Acid Canned Foods Regulations, set down in the mid-1970s to ensure the safety of all canned food products in the U.S.

  5. Processed foods: contributions to nutrition.

    Weaver, Connie M; Dwyer, Johanna; Fulgoni, Victor L; King, Janet C; Leveille, Gilbert A; MacDonald, Ruth S; Ordovas, Jose; Schnakenberg, David

    2014-06-01

    Both fresh and processed foods make up vital parts of the food supply. Processed food contributes to both food security (ensuring that sufficient food is available) and nutrition security (ensuring that food quality meets human nutrient needs). This ASN scientific statement focuses on one aspect of processed foods: their nutritional impacts. Specifically, this scientific statement 1) provides an introduction to how processed foods contribute to the health of populations, 2) analyzes the contribution of processed foods to "nutrients to encourage" and "constituents to limit" in the American diet as recommended by the Dietary Guidelines for Americans, 3) identifies the responsibilities of various stakeholders in improving the American diet, and 4) reviews emerging technologies and the research needed for a better understanding of the role of processed foods in a healthy diet. Analyses of the NHANES 2003-2008 show that processed foods provide both nutrients to encourage and constituents to limit as specified in the 2010 Dietary Guidelines for Americans. Of the nutrients to encourage, processed foods contributed 55% of dietary fiber, 48% of calcium, 43% of potassium, 34% of vitamin D, 64% of iron, 65% of folate, and 46% of vitamin B-12. Of the constituents to limit, processed foods contributed 57% of energy, 52% of saturated fat, 75% of added sugars, and 57% of sodium. Diets are more likely to meet food guidance recommendations if nutrient-dense foods, either processed or not, are selected. Nutrition and food science professionals, the food industry, and other stakeholders can help to improve the diets of Americans by providing a nutritious food supply that is safe, enjoyable, affordable, and sustainable by communicating effectively and accurately with each other and by working together to improve the overall knowledge of consumers. © 2014 American Society for Nutrition.

  6. Food processing with linear accelerators

    Wilmer, M.E.

    1987-01-01

    The application of irradiation techniques to the preservation of foods is reviewed. The utility of the process for several important food groups is discussed in the light of work being done in a number of institutions. Recent findings in food chemistry are used to illustrate some of the potential advantages in using high power accelerators in food processing. Energy and dosage estimates are presented for several cases to illustrate the accelerator requirements and to shed light on the economics of the process

  7. Sodium content on processed foods for snacks.

    Kraemer, Mariana Vieira dos Santos; Oliveira, Renata Carvalho de; Gonzalez-Chica, David Alejandro; Proença, Rossana Pacheco da Costa

    2016-04-01

    To assess the Na content reported on the labels of processed foods sold in Brazil that are usually consumed as snacks by children and adolescents. Cross-sectional study that assessed Na content and serving size reporting on processed food labels. A supermarket that is part of a large chain in Brazil. All foods available for sale at the study's location and reported in the literature as snacks present in the diets of Brazilian children and adolescents. Of the 2945 processed foods, 87 % complied with the reference serving sizes, although variability in reporting was observed in most of the food subgroups. In addition, 21 % of the processed foods had high Na levels (>600 mg/100 g) and 35 % had medium Na levels (>120 and ≤600 mg/100 g). The meats, oils, fats and seeds groups as well as the prepared dishes had higher percentages of foods classified as high Na (81 %, 58 % and 53 %, respectively). Most of the processed foods had high or medium Na content. We emphasize the importance of revising Brazilian nutrition labelling legislation to standardize reference serving sizes to avoid variation. Besides, we point out the potential for reducing Na levels in most processed foods, as evidenced by the variability in Na content within subgroups. Finally, we have identified the need to develop a method to classify Na levels in processed foods with specific parameters for children and adolescents.

  8. Design and optimization of food processing conditions

    Silva, C. L. M.

    1996-01-01

    The main research objectives of the group are the design and optimization of food processing conditions. Most of the work already developed is on the use of mathematical modeling of transport phenomena and quantification of degradation kinetics as two tools to optimize the final quality of thermally processed food products. Recently, we initiated a project with the main goal of studying the effects of freezing and frozen storage on orange and melon juice pectinesterase activity and q...

  9. How extrusion shapes food processing

    This month's column will explore food extrusion. Extrusion is one of the most commonly used food manufacturing processes. Its versatility enables production of a diverse array of food products. This column will review the basic principles and provide an overview of applications. I would like to ...

  10. Radiation processing of food

    Saint-Lebe, L.; Raffi, J.

    1986-01-01

    Food treatment by stream of electrons, X or gamma photons, induces an ionization in the medium whom consequences are very more important for contaminants than for food components. Effects upon insects are spectacular at very low doses of about 0.15 kGy and so it is for microoganisms at doses of some 1 kGy. Products consecutive to this radiolysis are of the same nature that the one induced by thermolysis. Ionizing treatments are the only ones allowing an efficacious sterilization of foods without any cooking. Irradiation plants are yet ready and of two types: large for multiple applications, small for single product. Small gamma irradiators and electron accelerators allow line treatment [fr

  11. Living and learning food processing

    This year’s annual event promises to be both exciting and educational for those who wish to learn more about food processing. This column will provide a brief overview of the multitude of scientific sessions that reveal new research related to food processing. In addition to the symposia previewed h...

  12. Biofuels from food processing wastes.

    Zhang, Zhanying; O'Hara, Ian M; Mundree, Sagadevan; Gao, Baoyu; Ball, Andrew S; Zhu, Nanwen; Bai, Zhihui; Jin, Bo

    2016-04-01

    Food processing industry generates substantial high organic wastes along with high energy uses. The recovery of food processing wastes as renewable energy sources represents a sustainable option for the substitution of fossil energy, contributing to the transition of food sector towards a low-carbon economy. This article reviews the latest research progress on biofuel production using food processing wastes. While extensive work on laboratory and pilot-scale biosystems for energy production has been reported, this work presents a review of advances in metabolic pathways, key technical issues and bioengineering outcomes in biofuel production from food processing wastes. Research challenges and further prospects associated with the knowledge advances and technology development of biofuel production are discussed. Copyright © 2016. Published by Elsevier Ltd.

  13. Isotope aided studies of pesticide residues during food processing. Report of a final research co-ordination meeting held in Bangkok, Thailand, 31 January - 4 February 1994

    1995-08-01

    The use of agrochemicals in general and pesticides in particular has greatly aided crop production, protected man from diseases, decreased losses of stored grains and has generally improved man's welfare. One of the steps in ensuring safety of pesticides is adequate monitoring programmes for residue levels in food products and the agricultural environment. Oil-bearing plants often receive heavy pesticide treatment and known to accumulate high concentration of pesticide residues. Technical documents included in this volume report effect of refining or processing of various oil crops like soybean, olive oil, coconut, rapeseed, sunflower cottonseed corn, peanut oil on 14 C-compound pesticide residues. Refs, figs and tabs

  14. Isotope aided studies of pesticide residues during food processing. Report of a final research co-ordination meeting held in Bangkok, Thailand, 31 January - 4 February 1994

    NONE

    1995-08-01

    The use of agrochemicals in general and pesticides in particular has greatly aided crop production, protected man from diseases, decreased losses of stored grains and has generally improved man`s welfare. One of the steps in ensuring safety of pesticides is adequate monitoring programmes for residue levels in food products and the agricultural environment. Oil-bearing plants often receive heavy pesticide treatment and known to accumulate high concentration of pesticide residues. Technical documents included in this volume report effect of refining or processing of various oil crops like soybean, olive oil, coconut, rapeseed, sunflower cottonseed corn, peanut oil on {sup 14}C-compound pesticide residues.

  15. Putting ultrasound to use in food processing

    Ultrasound has been applied to a wide range of food processing operations, both in research laboratories and commercially. This emerging technology has received a good deal of interest due to its green nature and nonthermal benefits, which include increased throughput, reduced cost, improved final ...

  16. Food irradiation and combination processes

    Campbell-Platt, G.; Grandison, A.S.

    1990-01-01

    International approval of food irradiation is being given for the use of low and medium doses. Uses are being permitted for different categories of foods with maximum levels being set between 1 and 10 kGy. To maximize the effectiveness of these mild irradiation treatments while minimizing any organoleptic quality changes, combination processes of other technologies with irradiation will be useful. Combinations most likely to be exploited in optimal food processing include the use of heat, low temperature, and modified-atmosphere packaging. Because irradiation does not have a residual effect, the food packaging itself becomes an important component of a successful process. These combination processes provide promising alternatives to the use of chemical preservatives or harsher processing techniques. (author)

  17. Irradiation processing of food

    Anunuso, C.I.

    1988-01-01

    Ionizing radiation is now showing new promise of contributing to the feeding of hungry populations, solving solid and liquid waste disposal problems, providing safer medical supplies, pharmaceuticals, and other commodities, and at the same time reducing energy consumption in industrial processing in general. (author)

  18. Processing Contaminants in Food Production

    Granby, Kit; Duedahl-Olesen, Lene; Fromberg, Arvid

    Contaminants like acrylamide, furan or PAHs (polyaromatic hydrocarbons) as e.g. Benz(a)pyrene may be formed during food processing. All of the substances are genotoxic carcinogens, and for that reason mitigation strategies to reduce the levels are needed. Examples of the formation of the processing...... contaminants and factors that influence the occurrence are given as well as suggestions for mitigation....

  19. Processing Contaminants in Food Production

    Granby, Kit; Duedahl-Olesen, Lene; Fromberg, Arvid; Pedreschi, Franco

    2011-01-01

    Contaminants like acrylamide, furan or PAHs (polyaromatic hydrocarbons) as e.g. Benz(a)pyrene may be formed during food processing. All of the substances are genotoxic carcinogens, and for that reason mitigation strategies to reduce the levels are needed. Examples of the formation of the processing contaminants and factors that influence the occurrence are given as well as suggestions for mitigation.

  20. Introduction to Innovative Food Processing and Technology

    Tokusoglu, Ozlem

    2015-01-01

    Consumers, the food industry and the regulatory agencies demand the innovative technologies to provide safe and stable foods. Nonthermal processing technologies offer unprecedented opportunities and challenges for the food industry to market safe, high quality health-promoting foods. Those innovative food processing is often perceived as an alternative to thermal food processing, yet there are many nonthermal preparatory unit operations as well as food processing and preservation opportunitie...

  1. Food irradiation: Gamma processing facilities

    Kunstadt, P [MDS Nordion International, 447 March Road. Kanata, Ontario, K2K148 (Canada)

    1998-12-31

    The number of products being radiation processed is constantly increasing and today include such diverse items as medical disposable, fruits and vegetables, bulk spices, meats, sea foods and waste effluents. Not only do the products differ but also many products, even those within the same groupings, require different minimum and maximum radiation doses. These variations create many different requirements in the irradiator design. The design of Cobalt-60 radiation processing facilities is well established for a number of commercial applications. Installations in over 40 countries, with some in operation since the early 1960s, are testimony to the fact that irradiator design, manufacture, installation and operation is a well established technology. However, in order to design gamma irradiators for the preservation of foods one must recognize those parameters typical to the food irradiation process as well as those systems and methods already well established in the food industry. This paper discusses the basic design concepts for gamma food irradiators. They are most efficient when designed to handle a limited product density range at an established dose. Safety of Cobalt-60 transport, safe facility operation principles and the effect of various processing parameters on economics, will also be discussed. (Author)

  2. Food irradiation: Gamma processing facilities

    Kunstadt, P.

    1997-01-01

    The number of products being radiation processed is constantly increasing and today include such diverse items as medical disposable, fruits and vegetables, bulk spices, meats, sea foods and waste effluents. Not only do the products differ but also many products, even those within the same groupings, require different minimum and maximum radiation doses. These variations create many different requirements in the irradiator design. The design of Cobalt-60 radiation processing facilities is well established for a number of commercial applications. Installations in over 40 countries, with some in operation since the early 1960s, are testimony to the fact that irradiator design, manufacture, installation and operation is a well established technology. However, in order to design gamma irradiators for the preservation of foods one must recognize those parameters typical to the food irradiation process as well as those systems and methods already well established in the food industry. This paper discusses the basic design concepts for gamma food irradiators. They are most efficient when designed to handle a limited product density range at an established dose. Safety of Cobalt-60 transport, safe facility operation principles and the effect of various processing parameters on economics, will also be discussed. (Author)

  3. Food irradiation: Gamma processing facilities

    Kunstadt, P. [MDS Nordion International, 447 March Road. Kanata, Ontario, K2K148 (Canada)

    1997-12-31

    The number of products being radiation processed is constantly increasing and today include such diverse items as medical disposable, fruits and vegetables, bulk spices, meats, sea foods and waste effluents. Not only do the products differ but also many products, even those within the same groupings, require different minimum and maximum radiation doses. These variations create many different requirements in the irradiator design. The design of Cobalt-60 radiation processing facilities is well established for a number of commercial applications. Installations in over 40 countries, with some in operation since the early 1960s, are testimony to the fact that irradiator design, manufacture, installation and operation is a well established technology. However, in order to design gamma irradiators for the preservation of foods one must recognize those parameters typical to the food irradiation process as well as those systems and methods already well established in the food industry. This paper discusses the basic design concepts for gamma food irradiators. They are most efficient when designed to handle a limited product density range at an established dose. Safety of Cobalt-60 transport, safe facility operation principles and the effect of various processing parameters on economics, will also be discussed. (Author)

  4. Electromagnetic energy and food processing

    Mudgett, R.

    1988-01-01

    The use of electromagnetic energy in food processing is reviewed with respect to food safety, nutritional quality, and organoleptic quality. The effects of nonionizing radiation sources such as microwave and radio-frequency energy and ionizing radiation sources, e.g. radioactive cobalt-60 and caesium-137, on the inactivation of microbes and nutrients are compared with those of conventional heating processes both in terms of their kinetic behavior and their mechanisms of interaction with foods. The kinetics of microwave and conventional thermal inactivation are considered for a generalized nth-order model based on time and temperature conditions. However, thermal inactivation effects are often modeled by 1 st-order kinetics. Microbial and nutrient inactivation by ionizing sources are considered for a 1 st-order model based on radiation dose. Both thermal and radiation resistance concepts are reviewed and some typical values of radiation resistance are given for sensitive vegetative bacterial cells, yeasts, and molds and for resistant bacterial spores and viruses. Nonionizing microwave energy sources are increasingly used in home and industrial food processing and are well-accepted by the American public. But, despite recent Food and Drug Administration approval of low and intermediate ionizing radiation dose levels for grains and other plant products and the fact that irradiated foods are sold in more than 20 countries of the world, public fears in the U.S. about nuclear energy may limit the role of ionizing radiation in food processing and preservation and may also limit the use of nuclear fuels as an alternate source of electrical energy. (33 refs.)

  5. Pallet irradiators for food processing

    McKinnon, R.G.; Chu, R.D.H.

    1985-01-01

    This paper looks at the various design concepts for the irradiation processing of food products, with particular emphasis on handling the products on pallets. Pallets appear to offer the most attractive method for handling foods from many considerations. Products are transported on pallets. Warehouse space is commonly designed for pallet storage and, if products are already palletized before and after irradiation, then labour could be saved by irradiating on pallets. This is also an advantage for equipment operation since a larger carrier volume means lower operation speeds. Different pallet irradiator design concepts are examined and their suitability for several applications are discussed. For example, low product holdup for fast turn around will be a consideration for those operating an irradiation 'service' business; others may require a very large source where efficiency is the primary requirement and this will not be consistent with low holdup. The radiation performance characteristics and processing costs of these machines are discussed. (author)

  6. Processing Food for the Domestic Market

    Thomsen, Lotte; McCormick, Dorothy; Kamau, Paul

    This paper addresses the domestically owned food-processing industry in Kenya and explores thesale of processed food products to the domestic ‘modern’ retail sector. Food processing represents astep up in the value chain compared to fresh food production and may thus, at least potentially, leadto...

  7. Fungal Spoilage in Food Processing.

    Snyder, Abigail B; Worobo, Randy W

    2018-06-01

    Food processing, packaging, and formulation strategies are often specifically designed to inhibit or control microbial growth to prevent spoilage. Some of the most restrictive strategies rely solely or on combinations of pH reduction, preservatives, water activity limitation, control of oxygen tension, thermal processing, and hermetic packaging. In concert, these strategies are used to inactivate potential spoilage microorganisms or inhibit their growth. However, for select microbes that can overcome these controls, the lack of competition from additional background microbiota helps facilitate their propagation.

  8. Optimization of frying process in food safety

    Quaglia, G.

    1998-08-01

    Full Text Available The mechanics of frying are fairly simple. Hot oil serves as a heat exchange medium in which heat is transferred to the food being fried. As a result, the heat converts water within the food to steam and melts the fat within the food. The steam and fat then migrate from the interior of the food through the exterior and into the oil. Conversely, some of the frying oil is absorbed into the food being fried. The chemistry occurring in the frying oil and in the food being fried includes a myriad of thermal and oxidative reactions involving lipids, proteins, carbohydrates and minor food constituents. Decomposition products by autoxidation above 100°C, polimerization without oxigen between 200-300°C and thermal oxidation at 200°C, can be produced in frying oil and their amounts are related to different chemical and physical parameters such as temperature, heating time, type of oil used and food being fried, oil turnover rate, management of the oil and finally type of equipment used. Different studies have remarked as the toxicity of these by-products, is due to their chemistry and concentration. Since the prime requirement in food quality is the safety of the products, attainable through preventive analysis of the risks and total control through all frying processes, in this work the critical points of particular importance are identify and showed: Oil composition, and in particular its antioxidant capacity. Proper fryer design. Food/oil ratio. Good manufactured practice. Beside the quality screening has to be direct towards the chemical quality evaluation by easy and rapid analysis of oil (colour, polar compounds, free fatty acids and antioxidant capacity and food fried (panel test and/or consumer test. Conclusion, to maintain high quality in the frying medium, choose efficient equipment, select a fat with desirable flavour and good antioxidant capacity, eliminate crackling as soon and often as possible, choose better components with minimal but

  9. Listeria monocytogenes in Food-Processing Facilities, Food Contamination, and Human Listeriosis: The Brazilian Scenario.

    Camargo, Anderson Carlos; Woodward, Joshua John; Call, Douglas Ruben; Nero, Luís Augusto

    2017-11-01

    Listeria monocytogenes is a foodborne pathogen that contaminates food-processing environments and persists within biofilms on equipment, utensils, floors, and drains, ultimately reaching final products by cross-contamination. This pathogen grows even under high salt conditions or refrigeration temperatures, remaining viable in various food products until the end of their shelf life. While the estimated incidence of listeriosis is lower than other enteric illnesses, infections caused by L. monocytogenes are more likely to lead to hospitalizations and fatalities. Despite the description of L. monocytogenes occurrence in Brazilian food-processing facilities and foods, there is a lack of consistent data regarding listeriosis cases and outbreaks directly associated with food consumption. Listeriosis requires rapid treatment with antibiotics and most drugs suitable for Gram-positive bacteria are effective against L. monocytogenes. Only a minority of clinical antibiotic-resistant L. monocytogenes strains have been described so far; whereas many strains recovered from food-processing facilities and foods exhibited resistance to antimicrobials not suitable against listeriosis. L. monocytogenes control in food industries is a challenge, demanding proper cleaning and application of sanitization procedures to eliminate this foodborne pathogen from the food-processing environment and ensure food safety. This review focuses on presenting the L. monocytogenes distribution in food-processing environment, food contamination, and control in the food industry, as well as the consequences of listeriosis to human health, providing a comparison of the current Brazilian situation with the international scenario.

  10. Challenges and Prospects of Traditional Food Processing ...

    This paper focuses on challenges and prospects of traditional food processing technologies and their products in Nigeria. The major objective of the paper is to identify the challenges confronting traditional food processing technologies as well as the potentials the traditional food processing technologies has in boosting the ...

  11. Exploring novel food proteins and processing technologies

    Avila Ruiz, Geraldine

    2016-01-01

    Foods rich in protein are nowadays high in demand worldwide. To ensure a sustainable supply and a high quality of protein foods, novel food proteins and processing technologies need to be explored to understand whether they can be used for the development of high-quality protein foods. Therefore,

  12. Facts about food irradiation: Controlling the process

    1991-01-01

    This fact sheet briefly reviews the procedures that exist to control the process of food irradiation. It also summarizes the difficulties in identifying irradiated food, which stem from the fact that irradiation does not physically change the food or cause significant chemical changes in foods. 4 refs

  13. Use of irradiation to ensure the hygienic quality of fresh, pre-cut fruits and vegetables and other minimally processed food of Plant Origin. Proceedings of a final research coordination meeting

    2006-12-01

    Sales and consumption of fresh pre-cut and minimally processed fruits and vegetables continue to grow. Changes occurring in life and eating styles, as well as demographic changes, have been cited as one of the reasons for the increasing demand for this type of produce. Since fresh fruits and vegetables are grown, processed or packaged in areas that may be exposed to microbial pathogen contamination, there is an increasing concern that these products may harbour microbial pathogens. In fact, a number of outbreaks linked to the consumption of contaminated fresh pre-cut fruits and vegetables have been reported. Prior to this Coordinated Research Project (CRP), studies on various chemical and physical methods of decontamination for their efficacy in destroying pathogens have been made. The use of ionizing radiation seems to have several advantages in relation to other alternative treatments; however more research was needed in order to demonstrate its efficacy without producing negative effects in the physiological traits of the fruit, and thus the commercial quality of these products. The Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture initiated in 2001 a Coordinated Research Project (CRP) on the Use of Irradiation to Ensure Hygienic Quality of Fresh, Pre-cut Fruits and Vegetables and other Minimally Processed Food of Plant Origin. This CRP included 15 participants from Argentina, Brazil, Canada, Chile, China, Egypt, Hungary, India, Malaysia, Pakistan, Portugal, Turkey, United Kingdom and the United States of America (2). Research coordinated meetings were held in Rio de Janeiro, Brazil (5-9 November 2001), Belfast, UK (14-18 April 2003) and Islamabad, Pakistan (25-29 July 2005). This publication presents the research results presented in the final research coordination meeting, where the work completed during the last five years (2001-2005) was analysed

  14. Effects of daily food processing on allergenicity.

    Cabanillas, Beatriz; Novak, Natalija

    2017-08-11

    Daily food processing has the potential to alter the allergenicity of foods due to modification of the physico-chemical properties of proteins. The degree of such modifications depends on factors such as processing conditions, type of food considered, allergenic content, etc. The impact of daily food processing like boiling, roasting, frying or baking on food allergenicity have been extensively studied. The influence of other thermal treatments such as microwave heating or pressure cooking on allergenicity has also been analyzed. Non-thermal treatment such as peeling impacts on the allergenic content of certain foods such as fruits. In this review, we give an updated overview of the effects of daily processing treatments on the allergenicity of a wide variety of foods. The different variables that contribute to the modification of food allergenicity due to processing are also reviewed and discussed.

  15. Food Processing and the Mediterranean Diet

    Richard Hoffman

    2015-09-01

    Full Text Available The benefits of the Mediterranean diet (MD for protecting against chronic disorders such as cardiovascular disease are usually attributed to high consumption of certain food groups such as vegetables, and low consumption of other food groups such as meat. The influence of food processing techniques such as food preparation and cooking on the nutrient composition and nutritional value of these foods is not generally taken into consideration. In this narrative review, we consider the mechanistic and epidemiological evidence that food processing influences phytochemicals in selected food groups in the MD (olives, olive oil, vegetables and nuts, and that this influences the protective effects of these foods against chronic diseases associated with inflammation. We also examine how the pro-inflammatory properties of meat consumption can be modified by Mediterranean cuisine. We conclude by discussing whether food processing should be given greater consideration, both when recommending a MD to the consumer and when evaluating its health properties.

  16. Food Processing and the Mediterranean Diet.

    Hoffman, Richard; Gerber, Mariette

    2015-09-17

    The benefits of the Mediterranean diet (MD) for protecting against chronic disorders such as cardiovascular disease are usually attributed to high consumption of certain food groups such as vegetables, and low consumption of other food groups such as meat. The influence of food processing techniques such as food preparation and cooking on the nutrient composition and nutritional value of these foods is not generally taken into consideration. In this narrative review, we consider the mechanistic and epidemiological evidence that food processing influences phytochemicals in selected food groups in the MD (olives, olive oil, vegetables and nuts), and that this influences the protective effects of these foods against chronic diseases associated with inflammation. We also examine how the pro-inflammatory properties of meat consumption can be modified by Mediterranean cuisine. We conclude by discussing whether food processing should be given greater consideration, both when recommending a MD to the consumer and when evaluating its health properties.

  17. Food Processing and the Mediterranean Diet

    Hoffman, Richard; Gerber, Mariette

    2015-01-01

    The benefits of the Mediterranean diet (MD) for protecting against chronic disorders such as cardiovascular disease are usually attributed to high consumption of certain food groups such as vegetables, and low consumption of other food groups such as meat. The influence of food processing techniques such as food preparation and cooking on the nutrient composition and nutritional value of these foods is not generally taken into consideration. In this narrative review, we consider the mechanistic and epidemiological evidence that food processing influences phytochemicals in selected food groups in the MD (olives, olive oil, vegetables and nuts), and that this influences the protective effects of these foods against chronic diseases associated with inflammation. We also examine how the pro-inflammatory properties of meat consumption can be modified by Mediterranean cuisine. We conclude by discussing whether food processing should be given greater consideration, both when recommending a MD to the consumer and when evaluating its health properties. PMID:26393643

  18. Food processing by high hydrostatic pressure.

    Yamamoto, Kazutaka

    2017-04-01

    High hydrostatic pressure (HHP) process, as a nonthermal process, can be used to inactivate microbes while minimizing chemical reactions in food. In this regard, a HHP level of 100 MPa (986.9 atm/1019.7 kgf/cm 2 ) and more is applied to food. Conventional thermal process damages food components relating color, flavor, and nutrition via enhanced chemical reactions. However, HHP process minimizes the damages and inactivates microbes toward processing high quality safe foods. The first commercial HHP-processed foods were launched in 1990 as fruit products such as jams, and then some other products have been commercialized: retort rice products (enhanced water impregnation), cooked hams and sausages (shelf life extension), soy sauce with minimized salt (short-time fermentation owing to enhanced enzymatic reactions), and beverages (shelf life extension). The characteristics of HHP food processing are reviewed from viewpoints of nonthermal process, history, research and development, physical and biochemical changes, and processing equipment.

  19. Radiation processing of food to ensure food safety and security

    Gautam, Satyendra

    2016-01-01

    Radiation processing of food utilizes the controlled application of energy from ionizing radiations such as γ-rays , electrons and X-rays on food. Gamma-rays and X-rays are short wavelength radiations of the electromagnetic spectrum. The approved sources of gamma radiation for food processing are radioisotopes (Cobalt-60 and Caesium-137), electron beam (up to 10 MeV) and X-rays (up to 5 MeV) wherein the latter two are generated by machines using electricity. γ-radiation can penetrate deep into the food materials causing the desired effects. Irradiation works by disrupting the biological processes that lead to decay. While interacting with water and other biomolecules that constitute the food and living organisms, radiation energy is absorbed by these molecules. The interactions of radiation and radiolytic products of water with DNA impair the reproduction of microorganism and insects, and thus help in achieving the desired objectives pertaining to food safety and security

  20. Radiation processing of food and agricultural commodities

    Sharma, Arun

    2014-01-01

    Reducing post-harvest food losses is becoming increasingly important for sustaining food supplies. Appropriate post-harvest processing, handling, storage and distribution practices are as important as the efforts to increase productivity for improving food security, food safety and international trade in agricultural commodities. Preservation of food by ionizing radiation involves controlled application of energy of ionizing radiation such as gamma rays, X-rays, and accelerated electrons to agricultural commodities, food products and ingredients, for improving their storage life, hygiene and safety. The process employs either gamma rays emitted by radioisotopes such as cobalt-60 or high-energy electrons or X-rays generated from machine sources

  1. Engineering Digestion: Multiscale Processes of Food Digestion.

    Bornhorst, Gail M; Gouseti, Ourania; Wickham, Martin S J; Bakalis, Serafim

    2016-03-01

    Food digestion is a complex, multiscale process that has recently become of interest to the food industry due to the developing links between food and health or disease. Food digestion can be studied by using either in vitro or in vivo models, each having certain advantages or disadvantages. The recent interest in food digestion has resulted in a large number of studies in this area, yet few have provided an in-depth, quantitative description of digestion processes. To provide a framework to develop these quantitative comparisons, a summary is given here between digestion processes and parallel unit operations in the food and chemical industry. Characterization parameters and phenomena are suggested for each step of digestion. In addition to the quantitative characterization of digestion processes, the multiscale aspect of digestion must also be considered. In both food systems and the gastrointestinal tract, multiple length scales are involved in food breakdown, mixing, absorption. These different length scales influence digestion processes independently as well as through interrelated mechanisms. To facilitate optimized development of functional food products, a multiscale, engineering approach may be taken to describe food digestion processes. A framework for this approach is described in this review, as well as examples that demonstrate the importance of process characterization as well as the multiple, interrelated length scales in the digestion process. © 2016 Institute of Food Technologists®

  2. Hadron final states in deep inelastic processes

    Bjorken, J.D.

    1976-05-01

    Lectures are presented dealing mainly with the description and discussion of hadron final states in electroproduction, colliding beams, and neutrino reactions from the point of view of the simple parton model. Also the space-time evolution of final states in the parton model is considered. It is found that the picture of space-time evolution of hadron final states in deep inelastic processes isn't totally trivial and that it can be made consistent with the hypotheses of the parton model. 39 references

  3. Consumers' conceptualization of ultra-processed foods.

    Ares, Gastón; Vidal, Leticia; Allegue, Gimena; Giménez, Ana; Bandeira, Elisa; Moratorio, Ximena; Molina, Verónika; Curutchet, María Rosa

    2016-10-01

    Consumption of ultra-processed foods has been associated with low diet quality, obesity and other non-communicable diseases. This situation makes it necessary to develop educational campaigns to discourage consumers from substituting meals based on unprocessed or minimally processed foods by ultra-processed foods. In this context, the aim of the present work was to investigate how consumers conceptualize the term ultra-processed foods and to evaluate if the foods they perceive as ultra-processed are in concordance with the products included in the NOVA classification system. An online study was carried out with 2381 participants. They were asked to explain what they understood by ultra-processed foods and to list foods that can be considered ultra-processed. Responses were analysed using inductive coding. The great majority of the participants was able to provide an explanation of what ultra-processed foods are, which was similar to the definition described in the literature. Most of the participants described ultra-processed foods as highly processed products that usually contain additives and other artificial ingredients, stressing that they have low nutritional quality and are unhealthful. The most relevant products for consumers' conceptualization of the term were in agreement with the NOVA classification system and included processed meats, soft drinks, snacks, burgers, powdered and packaged soups and noodles. However, some of the participants perceived processed foods, culinary ingredients and even some minimally processed foods as ultra-processed. This suggests that in order to accurately convey their message, educational campaigns aimed at discouraging consumers from consuming ultra-processed foods should include a clear definition of the term and describe some of their specific characteristics, such as the type of ingredients included in their formulation and their nutritional composition. Copyright © 2016 Elsevier Ltd. All rights reserved.

  4. Application of Proteomics in Food Technology and Food Biotechnology: Process Development, Quality Control and Product Safety

    Dajana Gašo-Sokač

    2010-01-01

    Full Text Available Human food is a very complex biological mixture and food processing and safety are very important and essential disciplines. Proteomics technology using different high-performance separation techniques such as two-dimensional gel electrophoresis, one-dimensional and multidimensional chromatography, combined with high-resolution mass spectrometry has the power to monitor the protein composition of foods and their changes during the production process. The use of proteomics in food technology is presented, especially for characterization and standardization of raw materials, process development, detection of batch-to-batch variations and quality control of the final product. Further attention is paid to the aspects of food safety, especially regarding biological and microbial safety and the use of genetically modified foods.

  5. Microbial safety of minimally processed foods

    Novak, John S; Sapers, Gerald M; Juneja, Vijay K

    2003-01-01

    ...-course meals. All are expected to be portioned and minimally processed to balance the naturalness of unaltered foods with a concern for safety. Yet the responsibility for proper food preparation and handling remains with the naïve modern consumer, who may be less adept in food preparations than his or her less sophisticated ancestors. As a result,...

  6. Food Processing: Technology and Nutritive Value.

    Gerbouin-Rerolle, Pascale

    1993-01-01

    This booklet examines the principles of food preservation, food preservation techniques, and nutrition-related consequences of food processing. All foodstuffs in their natural state will deteriorate and become unfit for human consumption due to internal factors, such as enzyme activity, or external factors, such as insects, rodents, and…

  7. Indicators for Building Process without Final Defects -

    Jørgensen, Kirsten; Rasmussen, Grane Mikael Gregaard; Thuesen, Christian Langhoff

    2011-01-01

    This article introduces the preliminary data analysis, as well as the underlying theories and methods for identifying the indicators for building process without final defects. Since 2004, the Benchmark Centre for the Danish Construction Sector (BEC) has collected information about legal defects...

  8. Ultra-processed foods in human health: a critical appraisal.

    Gibney, Michael J; Forde, Ciarán G; Mullally, Deirdre; Gibney, Eileen R

    2017-09-01

    The NOVA classification of foods proposes 4 categories: unprocessed or minimally processed foods, processed culinary ingredients, processed foods, and ultra-processed foods and drinks (UPFDs). It is argued that the latter relies heavily on modifications to foods, resulting in enhanced amounts of salt, added sugar, and fat as well as the use of additives in an attempt to make this food category highly palatable. It further argues that controlling food processing, rather than examining nutrients, should be foremost in shaping nutrition policy. This commentary challenges many of the basic arguments of using the NOVA food classification system to examine the link between food and health. We believe that there is no evidence to uphold the view that UPFDs give rise to hyperpalatable foods associated with a quasi-addictive effect and that the prevailing European Union and US data fail to uphold the assertion that UPFDs, which dominate energy intake, give rise to dietary patterns that are low in micronutrients. With regard to the use of the NOVA food classification in the development of food-based dietary guidelines, we show that the very broad definition of UPFDs makes this impossible. Finally, the available evidence does not support the view that the globalization of food is the driver of increased intakes of UPFDs in low- to middle-income countries but rather that this is driven by small indigenous companies. On balance, therefore, there seems to be little advantage from the use of the NOVA classification compared with the current epidemiologic approach, which relies on the linkage of nutrient intakes to chronic disease with subsequent identification of foods that merit consideration in public health nutrition strategies. © 2017 American Society for Nutrition.

  9. Processed foods available in the Pacific Islands

    2013-01-01

    Background There is an increasing reliance on processed foods globally, yet food composition tables include minimal information on their nutrient content. The Pacific Islands share common trade links and are heavily reliant on imported foods. The objective was to develop a dataset for the Pacific Islands on nutrient composition of processed foods sold and their sources. Methods Information on the food labels, including country of origin, nutrient content and promotional claims were recorded into a standardised dataset. Data were cleaned, converted to per 100 g data as needed and then checked for anomalies and recording errors. Setting: Five representative countries were selected for data collection, based on their trading patterns: Fiji, Guam, Nauru, New Caledonia, and Samoa. Data were collected in the capitals, in larger stores which import their own foods. Subjects: Processed foods in stores. Results The data from 6041 foods and drinks were recorded. Fifty four countries of origin were identified, with the main provider of food for each Pacific Island country being that with which it was most strongly linked politically. Nutrient data were not provided for 6% of the foods, imported from various countries. Inaccurate labels were found on 132 products. Over one-quarter of the foods included some nutrient or health-related claims. Conclusions The globalisation of the food supply is having considerable impacts on diets in the Pacific Islands. While nutrient labels can be informative for consumers looking for healthier options, difficulties still exist with poor labelling and interpretation can be challenging. PMID:24160249

  10. Food processing with electrically generated photon irradiation

    Matthews, S.M.

    1983-01-01

    A conceptual design for a portable electric food irradiation processing machine is presented and analyzed for cost assuming the required accelerators are available for $1.5 million each. It is shown that food can be processed to 1 kGy for a price of $5.98/ton

  11. Food processing optimization using evolutionary algorithms | Enitan ...

    Evolutionary algorithms are widely used in single and multi-objective optimization. They are easy to use and provide solution(s) in one simulation run. They are used in food processing industries for decision making. Food processing presents constrained and unconstrained optimization problems. This paper reviews the ...

  12. ATAC Process Proof of Concept Final Report

    Bri Rolston; Sarah Freeman

    2014-03-01

    Researchers at INL with funding from the Department of Energy’s Office of Electricity Delivery and Energy Reliability (DOE-OE) evaluated a novel approach for near real-time consumption of threat intelligence. Demonstration testing in an industry environment supported the development of this new process to assist the electric sector in securing their critical networks. This report provides the reader with an understanding of the methods used during this proof of concept project. The processes and templates were further advanced with an industry partner during an onsite assessment. This report concludes with lessons learned and a roadmap for final development of these materials for use by industry.

  13. Prospects of eliminating pathogens by the process of food irradiation

    Kampelmacher, E.H.

    1981-01-01

    Food-borne diseases are an increasing health hazard throughout the world. Some of these diseases, such as salmonellosis, staphylo-entero-toxicosis, botulism, vibriosis and parasitic infections have always played an important role, whereas some other food-borne pathogens, such as Campylobacter, Vibrio parahaemolyticus and toxin-producing fungi have only been recognised in recent decades. Changing food-production methods, food processing and especially food habits, together with the enormous trade in foods and feeds from one part of the world to the other, are responsible for the increase of these diseases. To meet this situation, prevention and control of food-borne diseases, which involve large groups of persons and play a major socio-economic role in many parts of the world, are of utmost importance. In prevention and control programmes food irradiation can be applied successfully and may solve some of the food and feed contamination problems. The author summarizes to-day's most important food-borne diseases, the type of foods which are responsible for infections in man and animals, and the commodities in which low-dose food irradiation may be of great value in preventing these diseases. The advantages of irradiation versus the use of chemical additives and pesticides and with respect to the prevention of cross-contamination (which plays a very important role in initiating food-borne diseases) by pre-packaging, are emphasized. The required irradiaton doses to eliminate or reduce the number of pathogenic organisms which may be present in foods, the problem of radioresistance and the acceptability of irradiated food are discussed. Finally to-day's situation of irradiated foods with regard to legislation, consumers' information and economic feasibility is summarized. (author)

  14. Development of Food Preservation and Processing Technologies by Radiation Technology

    Byun, Myung Woo; Lee, Ju Won; Kim, Jae Hun

    2007-07-01

    To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following: As the first cooperative venture business technically invested by National Atomic Research Development Project, institute/company's [technology-invested technology foundation No. 1] cooperative venture, Sun-BioTech Ltd., was founded and stated its business. This suggested new model for commercialization and industrialization of the research product by nation-found institute. From the notice of newly approved product list about irradiated food, radiation health related legal approval on 7 food items was achieved from the Ministry of health and wellfare, the Korea Food and Drug Administration, and this contributed the foundation of enlargement of practical use of irradiated food. As one of the foundation project for activation of radiation application technology for the sanitation and secure preservation of special food, such as military meal service, food service for patient, and food for sports, and instant food, such as ready-to-eat/ready-to-cook food, the proposal for radiation application to the major military commander at the Ministry of National Defence and the Joint Chiefs of Staff was accepted for the direction of military supply development in mid-termed plan for the development of war supply. Especially, through the preliminary research and the development of foundation technology for the development of the Korean style space food and functional space food, space Kimch with very long shelf life was finally developed. The development of new item/products for food and life science by combining RT/BT, the development of technology for the elimination/reduction of

  15. Development of Food Preservation and Processing Technologies by Radiation Technology

    Byun, Myung Woo; Lee, Ju Won; Kim, Jae Hun [and others

    2007-07-15

    To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following: As the first cooperative venture business technically invested by National Atomic Research Development Project, institute/company's [technology-invested technology foundation No. 1] cooperative venture, Sun-BioTech Ltd., was founded and stated its business. This suggested new model for commercialization and industrialization of the research product by nation-found institute. From the notice of newly approved product list about irradiated food, radiation health related legal approval on 7 food items was achieved from the Ministry of health and wellfare, the Korea Food and Drug Administration, and this contributed the foundation of enlargement of practical use of irradiated food. As one of the foundation project for activation of radiation application technology for the sanitation and secure preservation of special food, such as military meal service, food service for patient, and food for sports, and instant food, such as ready-to-eat/ready-to-cook food, the proposal for radiation application to the major military commander at the Ministry of National Defence and the Joint Chiefs of Staff was accepted for the direction of military supply development in mid-termed plan for the development of war supply. Especially, through the preliminary research and the development of foundation technology for the development of the Korean style space food and functional space food, space Kimch with very long shelf life was finally developed. The development of new item/products for food and life science by combining RT/BT, the development of technology for the elimination/reduction of

  16. Development of Food Preservation and Processing Technologies by Radiation Technology

    Byun, Myung Woo; Lee, Ju Won; Kim, Jae Hun (and others)

    2007-07-15

    To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following: As the first cooperative venture business technically invested by National Atomic Research Development Project, institute/company's [technology-invested technology foundation No. 1] cooperative venture, Sun-BioTech Ltd., was founded and stated its business. This suggested new model for commercialization and industrialization of the research product by nation-found institute. From the notice of newly approved product list about irradiated food, radiation health related legal approval on 7 food items was achieved from the Ministry of health and wellfare, the Korea Food and Drug Administration, and this contributed the foundation of enlargement of practical use of irradiated food. As one of the foundation project for activation of radiation application technology for the sanitation and secure preservation of special food, such as military meal service, food service for patient, and food for sports, and instant food, such as ready-to-eat/ready-to-cook food, the proposal for radiation application to the major military commander at the Ministry of National Defence and the Joint Chiefs of Staff was accepted for the direction of military supply development in mid-termed plan for the development of war supply. Especially, through the preliminary research and the development of foundation technology for the development of the Korean style space food and functional space food, space Kimch with very long shelf life was finally developed. The development of new item/products for food and life science by combining RT/BT, the development of technology for the elimination/reduction of

  17. Radiation processing of food and allied products

    Sharma, Arun

    2009-01-01

    Assuring adequate food security to citizens of the country requires deployment of strategies for augmenting agricultural production while reducing post-harvest losses. Appropriate post-harvest processing, handling, storage and distribution practices are as important as the efforts to increase productivity for sustained food security, food safety and international trade in agricultural commodities. Nuclear energy has played a significant role both in the improvement of crop productivity, as well as, in the preservation and hygienization of agricultural produce

  18. Case Studies in Modelling, Control in Food Processes.

    Glassey, J; Barone, A; Montague, G A; Sabou, V

    This chapter discusses the importance of modelling and control in increasing food process efficiency and ensuring product quality. Various approaches to both modelling and control in food processing are set in the context of the specific challenges in this industrial sector and latest developments in each area are discussed. Three industrial case studies are used to demonstrate the benefits of advanced measurement, modelling and control in food processes. The first case study illustrates the use of knowledge elicitation from expert operators in the process for the manufacture of potato chips (French fries) and the consequent improvements in process control to increase the consistency of the resulting product. The second case study highlights the economic benefits of tighter control of an important process parameter, moisture content, in potato crisp (chips) manufacture. The final case study describes the use of NIR spectroscopy in ensuring effective mixing of dry multicomponent mixtures and pastes. Practical implementation tips and infrastructure requirements are also discussed.

  19. Modeling of Heating During Food Processing

    Zheleva, Ivanka; Kamburova, Veselka

    Heat transfer processes are important for almost all aspects of food preparation and play a key role in determining food safety. Whether it is cooking, baking, boiling, frying, grilling, blanching, drying, sterilizing, or freezing, heat transfer is part of the processing of almost every food. Heat transfer is a dynamic process in which thermal energy is transferred from one body with higher temperature to another body with lower temperature. Temperature difference between the source of heat and the receiver of heat is the driving force in heat transfer.

  20. Food labeling; calorie labeling of articles of food in vending machines. Final rule.

    2014-12-01

    To implement the vending machine food labeling provisions of the Patient Protection and Affordable Care Act of 2010 (ACA), the Food and Drug Administration (FDA or we) is establishing requirements for providing calorie declarations for food sold from certain vending machines. This final rule will ensure that calorie information is available for certain food sold from a vending machine that does not permit a prospective purchaser to examine the Nutrition Facts Panel before purchasing the article, or does not otherwise provide visible nutrition information at the point of purchase. The declaration of accurate and clear calorie information for food sold from vending machines will make calorie information available to consumers in a direct and accessible manner to enable consumers to make informed and healthful dietary choices. This final rule applies to certain food from vending machines operated by a person engaged in the business of owning or operating 20 or more vending machines. Vending machine operators not subject to the rules may elect to be subject to the Federal requirements by registering with FDA.

  1. Determination of acrylamide concentration in processed food ...

    Currently, acrylamide concentration in processed food products have become a very serious health issue. The World Health Organization (WHO) and the Scientific Committee for Food (SCF) of the European Union also confirmed this concern. In laboratory scale, it was found that acrylamide causes tumors in animals.

  2. Sustainable Food Processing Inspired by Nature.

    Sybesma, Wilbert; Blank, Imre; Lee, Yuan-Kun

    2017-04-01

    Here, we elaborate on the natural origin and use of enzymes and cultures in sustainable food processing. We also illustrate how enzymatically treated or fermented food can contribute to solving challenges involving nutrition and health, such as aging, malnutrition, obesity, and allergy. Copyright © 2017. Published by Elsevier Ltd.

  3. Food Processing Contracts: Savings for Schools.

    Van Egmond-Pannell, Dorothy

    1983-01-01

    Food processing contracts between schools and food manufacturers can result in huge cost savings. Fairfax County, Virginia, is one of 30 "letter of credit" sites in a three-year study of alternatives. After one year it appears that schools can purchase more for the dollar in their local areas. (MD)

  4. Exergy analysis in industrial food processing

    Zisopoulos, F.K.

    2016-01-01

    The sustainable provision of food on a global scale in the near future is a very serious challenge. This thesis focuses on the assessment and design of sustainable industrial food production chains and processes by using the concept of exergy which is an objective metric based on the first and

  5. Effects of food processing on the thermodynamic and nutritive value of foods: literature and database survey.

    Prochaska, L J; Nguyen, X T; Donat, N; Piekutowski, W V

    2000-02-01

    One of the goals of our society is to provide adequate nourishment for the general population of humans. In the strictness sense, the foodstuffs which we ingest are bundles of thermodynamic energy. In our post-industrial society, food producers provide society with the bioenergetic content of foods, while stabilizing the food in a non-perishable form that enables the consumer to access foods that are convenient and nutritious. As our modern society developed, the processing of foodstuffs increased to allow consumers flexibility in their choice in which foods to eat (based on nutritional content and amount of post-harvest processing). The thermodynamic energy content of foodstuffs is well documented in the literature by the use of bomb calorimetry measurements. Here, we determine the effects of processing (in most cases by the application of heat) on the thermodynamic energy content of foods in order to investigate the role of processing in daily nutritional needs. We also examine which processing procedures affect the nutritive quality (vitamin and mineral content) and critically assess the rational, advantages and disadvantages of additives to food. Finally, we discuss the role of endogenous enzymes in foods not only on the nutritive quality of the food but also on the freshness and flavor of the food. Our results show that a significant decrease in thermodynamic energy content occurs in fruits, vegetables, and meat products upon processing that is independent of water content. No significant change in energy content was observed in cereals, sugars, grains, fats and oils, and nuts. The vitamin content of most foods was most dramatically decreased by canning while smaller effects were observed upon blanching and freezing. We found that most food additives had very little effect on thermodynamic energy content due to their presence in minute quantities and that most were added to preserve the foodstuff or supplement its vitamin content. The endogenous food enzymes

  6. Modeling Dynamic Food Choice Processes to Understand Dietary Intervention Effects.

    Marcum, Christopher Steven; Goldring, Megan R; McBride, Colleen M; Persky, Susan

    2018-02-17

    Meal construction is largely governed by nonconscious and habit-based processes that can be represented as a collection of in dividual, micro-level food choices that eventually give rise to a final plate. Despite this, dietary behavior intervention research rarely captures these micro-level food choice processes, instead measuring outcomes at aggregated levels. This is due in part to a dearth of analytic techniques to model these dynamic time-series events. The current article addresses this limitation by applying a generalization of the relational event framework to model micro-level food choice behavior following an educational intervention. Relational event modeling was used to model the food choices that 221 mothers made for their child following receipt of an information-based intervention. Participants were randomized to receive either (a) control information; (b) childhood obesity risk information; (c) childhood obesity risk information plus a personalized family history-based risk estimate for their child. Participants then made food choices for their child in a virtual reality-based food buffet simulation. Micro-level aspects of the built environment, such as the ordering of each food in the buffet, were influential. Other dynamic processes such as choice inertia also influenced food selection. Among participants receiving the strongest intervention condition, choice inertia decreased and the overall rate of food selection increased. Modeling food selection processes can elucidate the points at which interventions exert their influence. Researchers can leverage these findings to gain insight into nonconscious and uncontrollable aspects of food selection that influence dietary outcomes, which can ultimately improve the design of dietary interventions.

  7. Solving Microbial Spoilage Problems in Processed Foods

    Clavero, Rocelle

    This chapter surveys common microbial food spoilage processes. The chapter is organized by food products and includes sections addressing spoilage in meat, poultry, fish; dairy products (milk, butter, cheese); beverage products; bakery products; canned foods; fruit and confectionery products; and emulsions. It addresses the isolation and identification of spoilage organisms and provides several case studies as examples. It introduces various organisms responsible for spoilage including Gram-positive lactic acid bacteria, Gram-negative aerobic bacteria, yeasts, molds, and fungal contaminants. Throughout the chapter, attention is given to when, where, and how spoilage organisms enter the food processing chain. Troubleshooting techniques are suggested. The effect (or lack of effect) of heating, dehydration, pH change, cooling, and sealing on various organisms is explained throughout. The chapter contains four tables that connect specific organisms to various spoilage manifestations in a variety of food products.

  8. Application of High Pressure in Food Processing

    Herceg, Z.

    2011-01-01

    Full Text Available In high pressure processing, foods are subjected to pressures generally in the range of 100 – 800 (1200 MPa. The processing temperature during pressure treatments can be adjusted from below 0 °C to above 100 °C, with exposure times ranging from a few seconds to 20 minutes and even longer, depending on process conditions. The effects of high pressure are system volume reduction and acceleration of reactions that lead to volume reduction. The main areas of interest regarding high-pressure processing of food include: inactivation of microorganisms, modification of biopolymers, quality retention (especially in terms of flavour and colour, and changes in product functionality. Food components responsible for the nutritive value and sensory properties of food remain unaffected by high pressure. Based on the theoretical background of high-pressure processing and taking into account its advantages and limitations, this paper aims to show its possible application in food processing. The paper gives an outline of the special equipment used in highpressure processing. Typical high pressure equipment in which pressure can be generated either by direct or indirect compression are presented together with three major types of high pressure food processing: the conventional (batch system, semicontinuous and continuous systems. In addition to looking at this technology’s ability to inactivate microorganisms at room temperature, which makes it the ultimate alternative to thermal treatments, this paper also explores its application in dairy, meat, fruit and vegetable processing. Here presented are the effects of high-pressure treatment in milk and dairy processing on the inactivation of microorganisms and the modification of milk protein, which has a major impact on rennet coagulation and curd formation properties of treated milk. The possible application of this treatment in controlling cheese manufacture, ripening and safety is discussed. The opportunities

  9. Food processing strategies to enhance phenolic compounds bioaccessibility and bioavailability in plant-based foods.

    Ribas-Agustí, Albert; Martín-Belloso, Olga; Soliva-Fortuny, Robert; Elez-Martínez, Pedro

    2017-06-13

    Phenolic compounds are important constituents of plant-based foods, as their presence is related to protective effects on health. To exert their biological activity, phenolic compounds must be released from the matrix during digestion in an absorbable form (bioaccessible) and finally absorbed and transferred to the bloodstream (bioavailable). Chemical structure and matrix interactions are some food-related factors that hamper phenolic compounds bioaccessibility and bioavailability, and that can be counteracted by food processing. It has been shown that food processing can induce chemical or physical modifications in food that enhance phenolic compounds bioaccessibility and bioavailability. These changes include: (i) chemical modifications into more bioaccessible and bioavailable forms; (ii) cleavage of covalent or hydrogen bonds or hydrophobic forces that attach phenolic compounds to matrix macromolecules; (iii) damaging microstructural barriers such as cell walls that impede the release from the matrix; and (iv) create microstructures that protect phenolic compounds until they are absorbed. Indeed, food processing can produce degradation of phenolic compounds, however, it is possible to counteract it by modulating the operating conditions in favor of increased bioaccessibility and bioavailability. This review compiles the current knowledge on the effects of processing on phenolic compounds bioaccessibility or bioavailability, while suggesting new guidelines in the search of optimal processing conditions as a step forward towards the design of healthier foods.

  10. Closing data gaps for LCA of food products: estimating the energy demand of food processing.

    Sanjuán, Neus; Stoessel, Franziska; Hellweg, Stefanie

    2014-01-21

    Food is one of the most energy and CO2-intensive consumer goods. While environmental data on primary agricultural products are increasingly becoming available, there are large data gaps concerning food processing. Bridging these gaps is important; for example, the food industry can use such data to optimize processes from an environmental perspective, and retailers may use this information for purchasing decisions. Producers and retailers can then market sustainable products and deliver the information demanded by governments and consumers. Finally, consumers are increasingly interested in the environmental information of foods in order to lower their consumption impacts. This study provides estimation tools for the energy demand of a representative set of food process unit operations such as dehydration, evaporation, or pasteurization. These operations are used to manufacture a variety of foods and can be combined, according to the product recipe, to quantify the heat and electricity demand during processing. In combination with inventory data on the production of the primary ingredients, this toolbox will be a basis to perform life cycle assessment studies of a large number of processed food products and to provide decision support to the stakeholders. Furthermore, a case study is performed to illustrate the application of the tools.

  11. Exploring the food chain. Food production and food processing in Western Europe, 1850-1990

    Bieleman, J.; Segers, Y.; Buyst, E.

    2009-01-01

    Until the late 19th century the food industry was restricted to a few activities, usually based on small scale industries. The links between agriculture and food processing were very tight. Due to increased purchasing power, population growth and urbanisation, the demand for food grew substantially.

  12. Possible implications of large scale radiation processing of food

    Zagorski, Z.P.

    1990-01-01

    Large scale irradiation has been discussed in terms of the participation of processing cost in the final value of the improved product. Another factor has been taken into account and that is the saturation of the market with the new product. In the case of successful projects the participation of irradiation cost is low, and the demand for the better product is covered. A limited availability of sources makes the modest saturation of the market difficult with all food subjected to correct radiation treatment. The implementation of the preservation of food needs a decided selection of these kinds of food which comply to all conditions i.e. of acceptance by regulatory bodies, real improvement of quality and economy. The last condition prefers the possibility of use of electron beams of low energy. The best fulfilment of conditions for successful processing is observed in the group of dry food, in expensive spices in particular. (author)

  13. Possible implications of large scale radiation processing of food

    Zagórski, Z. P.

    Large scale irradiation has been discussed in terms of the participation of processing cost in the final value of the improved product. Another factor has been taken into account and that is the saturation of the market with the new product. In the case of succesful projects the participation of irradiation cost is low, and the demand for the better product is covered. A limited availability of sources makes the modest saturation of the market difficult with all food subjected to correct radiation treatment. The implementation of the preservation of food needs a decided selection of these kinds of food which comply to all conditions i.e. of acceptance by regulatory bodies, real improvement of quality and economy. The last condition prefers the possibility of use of electron beams of low energy. The best fullfilment of conditions for succesful processing is observed in the group of dry food, in expensive spices in particular.

  14. 40 CFR 61.134 - Standard: Naphthalene processing, final coolers, and final-cooler cooling towers.

    2010-07-01

    ... coolers, and final-cooler cooling towers. 61.134 Section 61.134 Protection of Environment ENVIRONMENTAL... Standard: Naphthalene processing, final coolers, and final-cooler cooling towers. (a) No (“zero”) emissions are allowed from naphthalene processing, final coolers and final-cooler cooling towers at coke by...

  15. FINAL REPORT: Transformational electrode drying process

    Claus Daniel, C.; Wixom, M.(A123 Systems, Inc.)

    2013-12-19

    This report includes major findings and outlook from the transformational electrode drying project performance period from January 6, 2012 to August 1, 2012. Electrode drying before cell assembly is an operational bottleneck in battery manufacturing due to long drying times and batch processing. Water taken up during shipment and other manufacturing steps needs to be removed before final battery assembly. Conventional vacuum ovens are limited in drying speed due to a temperature threshold needed to avoid damaging polymer components in the composite electrode. Roll to roll operation and alternative treatments can increase the water desorption and removal rate without overheating and damaging other components in the composite electrode, thus considerably reducing drying time and energy use. The objective of this project was the development of an electrode drying procedure, and the demonstration of processes with no decrease in battery performance. The benchmark for all drying data was an 80°C vacuum furnace treatment with a residence time of 18 – 22 hours. This report demonstrates an alternative roll to roll drying process with a 500-fold improvement in drying time down to 2 minutes and consumption of only 30% of the energy compared to vacuum furnace treatment.

  16. Final processing vessel for radioactive waste

    Tejima, Takaya; Hiraki, Akimitsu.

    1989-01-01

    An inorganic inner layer comprising dense inorganic material such as organic polymer-impregnated concretes is formed to about 10 - 50 mm in average thickness at the inside of a metal vessel. Further, the surface of the vessel is formed as a flat surface with no or only small reinforcing protrusions. Thus, if the final processing vessel should be dropped during transportation or handling by mistake, since impact shocks do not concentrate to protrusions as usual, no local stress concentration occurs to the inorganic inner liner layer. Accordingly, the risk of rapture can be reduced greatly. Further, since impact shock resistance layer put between the metal vessel and the inorganic inner liner layer absorbs shocks, a further sufficient strength can be obtained against dropping accident. (T.M.)

  17. Retort process modelling for Indian traditional foods.

    Gokhale, S V; Lele, S S

    2014-11-01

    Indian traditional staple and snack food is typically a heterogeneous recipe that incorporates varieties of vegetables, lentils and other ingredients. Modelling the retorting process of multilayer pouch packed Indian food was achieved using lumped-parameter approach. A unified model is proposed to estimate cold point temperature. Initial process conditions, retort temperature and % solid content were the significantly affecting independent variables. A model was developed using combination of vegetable solids and water, which was then validated using four traditional Indian vegetarian products: Pulav (steamed rice with vegetables), Sambar (south Indian style curry containing mixed vegetables and lentils), Gajar Halawa (carrot based sweet product) and Upama (wheat based snack product). The predicted and experimental values of temperature profile matched with ±10 % error which is a good match considering the food was a multi component system. Thus the model will be useful as a tool to reduce number of trials required to optimize retorting of various Indian traditional vegetarian foods.

  18. Innovation drivers and barriers in food processing

    Fortuin, F.T.J.M.; Omta, S.W.F.

    2009-01-01

    Purpose - The food processing industry, confronted with increased global competition and more stringent customer demands, is pressurized to improve the pace and quality of its innovation processes. This paper aims to find out what factors constitute the main drivers and barriers to innovation and to

  19. Fundamental Processes in Plasmas. Final report

    O'Neil, Thomas M.; Driscoll, C. Fred

    2009-01-01

    This research focuses on fundamental processes in plasmas, and emphasizes problems for which precise experimental tests of theory can be obtained. Experiments are performed on non-neutral plasmas, utilizing three electron traps and one ion trap with a broad range of operating regimes and diagnostics. Theory is focused on fundamental plasma and fluid processes underlying collisional transport and fluid turbulence, using both analytic techniques and medium-scale numerical simulations. The simplicity of these systems allows a depth of understanding and a precision of comparison between theory and experiment which is rarely possible for neutral plasmas in complex geometry. The recent work has focused on three areas in basic plasma physics. First, experiments and theory have probed fundamental characteristics of plasma waves: from the low-amplitude thermal regime, to inviscid damping and fluid echoes, to cold fluid waves in cryogenic ion plasmas. Second, the wide-ranging effects of dissipative separatrices have been studied experimentally and theoretically, finding novel wave damping and coupling effects and important plasma transport effects. Finally, correlated systems have been investigated experimentally and theoretically: UCSD experients have now measured the Salpeter correlation enhancement, and theory work has characterized the 'guiding center atoms of antihydrogen created at CERN

  20. Cavitational Hydrothermal Oxidation: A New Remediation Process - Final Report; FINAL

    Suslick, K. S.

    2001-01-01

    During the past year, we have continued to make substantial scientific progress on our understanding of cavitation phenomena in aqueous media and applications of cavitation to remediation processes. Our efforts have focused on three separate areas: sonoluminescence as a probe of conditions created during cavitational collapse in aqueous media, the use of cavitation for remediation of contaminated water, and an addition of the use of ultrasound in the synthesis of novel heterogeneous catalysts for hydrodehalogenation of halocarbons under mild conditions

  1. 3D food printing: a new dimension in food production processes

    3D food printing, also known as food layered manufacture (FLM), is an exciting new method of digital food production that applies the process of additive manufacturing to food fabrication. In the 3D food printing process, a food product is first scanned or designed with computer-aided design softwa...

  2. Energy analysis in sterilization process of food

    Lee, Dong Sun; Pyun, Yu Ryang

    1986-01-01

    A procedure was developed for predicting energy consumption of batch type thermal processing of food. From mass and energy balance equations various energy usages or losses were estimated for steam sterilization of model food system in No.301-7 can (Φ74.1 x 113.0mm) at three different temperatures. Selected models were 5 % bentonite solution for conductive food and tap water for convective food. Total steam or energy consumption was higher at 110 deg C than at two other higher temperatures (121 deg C and 130 deg C). High energy consumption at low sterilization temperature was mainly due to high bleeding steam energy and convective and radiative heat losses. Thermal energy efficiency was also disscussed. (Author)

  3. Microbiological implications of the food irradiation process

    Teufel, P.

    1981-01-01

    The Joint FAO/IAEA/WHO Expert Committee on the wholesomeness of irradiated food which met in 1976 concluded after a detailed and critical review of the available information, that the microbiological aspects of food irradiation were fully comparable to those of conventional processes used in modern food technology. Processing of food by irradiation may be considered from the microbiological point of view as separate procedures: high dose treatment (> 10 kGy), for sterilisation (radappertization) and low dose treatment (< 10 kGy) for pasteurisation (radicidation, radurization), (for definitions see p. 43), disinfestation, or inhibition of sprouting. No public health hazards related to micro-organisms arise from high dose irradiation because this process results in commercially sterile products. On the other hand, it is important to consider the possible microbiological hazards when food is irradiated with a low dose. The microbiological implications relate to the natural radiation resistance of bacteria, yeasts, fungi and viruses or to the mutagenic effects of ionising radiation in micro-organisms. Both areas of concern were reviewed in detail by Ingram and Ingram and Farkas. (orig.)

  4. Flavor profile of radiation processed food commodities

    Chatterjee, S.; Variyar, Prasad S.; Sharma, Arun

    2006-01-01

    Full text: Flavor is one of the major quality attributes that play an important role in driving consumer choices and preferences for food. Among the several attributes that decide the flavor quality of any food, aroma and taste are the most important. While volatile constituents contribute to aroma, taste is a perception stimulated by non-volatile principles of food. Radiation processing of food has in recent years assumed increasing importance as a method for hygenization. At the doses employed for food irradiation no significant qualitative changes in the aroma constituents have been reported in most cases. An increase in perceived aroma has however been observed in several radiation processed foods. Besides volatile aroma compounds non-volatile aroma precursors are ubiquitous in plant kingdom. These compounds have been reported to exist largely as bound glycosidic conjugates and are known to undergo breakdown during processing and storage. This results in release of free aroma, thereby, modifying the flavor quality of the product. No report, however, exists on the effect of radiation processing on these bound aroma precursors. Four major class of food namely spices, oil seeds, fruits and beverages were therefore taken up for a detailed study. With respect to aroma, an enhanced breakdown of aroma precursors namely isoeugenol and 4-vinyl guaiacol glycosides and release of free aglycones was demonstrated to result in an increased aroma quality of radiation processed monsooned coffee. Breakdown of phenyl ethanol glucoside resulted in a fruitier note to pomegranate while enhanced spicy note of irradiated nutmeg arise as a result of radiolytic break down p-cymene-7-ol rutinoside precursor and release of free p-cymene-7-ol. An increased color quality of irradiated saffron was a result of the formation of free carotene aglycones namely crocetin from its glycosidic precursors while changes in perceived taste quality of radiation processed soybean could be attributed to

  5. Electrostatic coating technologies for food processing.

    Barringer, Sheryl A; Sumonsiri, Nutsuda

    2015-01-01

    The application of electrostatics in both powder and liquid coating can improve the quality of food, such as its appearance, aroma, taste, and shelf life. Coatings can be found most commonly in the snack food industry, as well as in confectionery, bakery, meat and cheese processing. In electrostatic powder coating, the most important factors influencing coating quality are powder particle size, density, flowability, charge, and resistivity, as well as the surface properties and characteristics of the target. The most important factors during electrostatic liquid coating, also known as electrohydrodynamic coating, include applied voltage and electrical resistivity and viscosity of the liquid. A good understanding of these factors is needed for the design of optimal coating systems for food processing.

  6. An industrial radiation source for food processing

    Sadat, R.

    1986-01-01

    The scientific linacs realized by CGR MeV in France have been installed in several research centers, the medical accelerators of CGR MeV have been installed in radiotherapy centers all over the world, and the industrial linacs have been used for radiography in heavy industries. Based on the experience for 30 years, CGR MeV has realized a new industrial radiation source for food processing. CARIC is going to install a new machine of CGR MeV, CASSITRON, as the demand for radiation increased. This machine has been devised specially for industrial irradiation purpose. Its main features are security, simplicity and reliability, and it is easy to incorporate it into a production line. The use of CASSITRON for food industry, the ionizing effect on mechanically separated poultry meat, the capital and processing cost and others are explained. Only 10 % of medical disposable supplies is treated by ionizing energy in France. The irradiation for food decontamination, and that for industrial treatment are demanded. Therefore, CARIC is going to increase the capacity by installing a CASSITRON for sterilization. The capital and processing cost are shown. The start of operation is expected in March, 1986. At present, a CASSITRON is being installed in the SPI food processing factory, and starts operation in a few weeks. (Kako, I.)

  7. Food Processing Curriculum Material and Resource Guide.

    Louisiana State Dept. of Education, Baton Rouge.

    Intended for secondary vocational agriculture teachers, this curriculum guide contains a course outline and a resource manual for a seven-unit food processing course on meats. Within the course outline, units are divided into separate lessons. Materials provided for each lesson include preparation for instruction (student objectives, review of…

  8. Hygienic Design in the Food Processing Industry

    Hilbert, Lisbeth Rischel; Hjelm, M.

    2001-01-01

    Bacterial adhesion and biofilm formation are of major concern in food production and processing industry. In 1998 a Danish co-operation programme under the title Centre for Hygienic Design was funded to combine the skills of universities, research institutes and industry to focus on the following...

  9. Recent advances in radiation processing of food

    Sharma, Arun

    2013-01-01

    Commercial application of radiation technology for food processing started in the nineties after it was approved by FAO/IAEA/WHO and Codex Alimentarius Commission in the eighties. Sanitary applications were initially explored commercially with microbial decontamination of spices and dry ingredients as the primary commodities to be processed on a large scale. Subsequently, with the emergence of E.coli O157:H7 as the potential food poisoning risk in ground beef, irradiation of meat was initiated in the late nineties in the USA. Since then irradiation, has become a very useful food safety tool and the technology has been approved for addressing food safety risks in moluscan shellfish and vegetables like lettuce, spinach, and more recently for raw uncooked meat by USFDA. Phytosanitary applications assumed importance after USFDA approved irradiation as a method of phytosanitary treatment and subsequent endorsement of the process by International Plant Protection Convention (IPPC) in 2003. These approvals were responsible for development of international trade in agricultural commodities. The first to demonstrate the feasibility of the process were India and Australia, the countries that exported mangoes to New Zealand and USA, respectively. As far as the source of radiation is concerned, the world is slowly moving towards deployment of machine sources, thereby reducing its dependence on radioisotopes for commercial irradiation. (author)

  10. Logistics integration processes in the food industry

    Giménez, Cristina

    2003-01-01

    This paper analyses the integration process that firms follow to implement Supply Chain Management (SCM). This study has been inspired in the integration model proposed by Stevens (1989). He suggests that companies internally integrate first and then extend integration to other supply chain members, such as customers and suppliers. To analyse the integration process a survey was conducted among Spanish food manufacturers. The results show that there are companies in three different integratio...

  11. Food related processes in the insular cortex

    Sabine eFrank

    2013-08-01

    Full Text Available The insular cortex is a multimodal brain region with regional cytoarchitectonic differences indicating various functional specializations. As a multisensory neural node, the insular cortex integrates perception, emotion, interoceptive awareness, cognition, and gustation. Regarding the latter, predominantly the anterior part of the insular cortex is regarded as the primary taste cortex.In this review, we will specifically focus on the involvement of the insula in food processing and on multimodal integration of food-related items. Influencing factors of insular activation elicited by various foods range from calorie-content to the internal physiologic state, body mass index or eating behavior. Sensory perception of food-related stimuli including seeing, smelling, and tasting elicits increased activation in the anterior and mid-dorsal part of the insular cortex. Apart from the pure sensory gustatory processing, there is also a strong association with the rewarding/hedonic aspects of food items, which is reflected in higher insular activity and stronger connections to other reward-related areas. Interestingly, the processing of food items has been found to elicit different insular activation in lean compared to obese subjects and in patients suffering from an eating disorder (anorexia nervosa, bulimia nervosa. The knowledge of functional differences in the insular cortex opens up the opportunity for possible noninvasive treatment approaches for obesity and eating disorders. To target brain functions directly, real-time functional magnetic resonance imaging neurofeedback offers a state-of-the-art tool to learn to control the anterior insular cortex activity voluntarily. First evidence indicates that obese adults have an enhanced ability to regulate the anterior insular cortex.

  12. Stability of mycotoxins during food processing.

    Bullerman, Lloyd B; Bianchini, Andreia

    2007-10-20

    The mycotoxins that commonly occur in cereal grains and other products are not completely destroyed during food processing operations and can contaminate finished processed foods. The mycotoxins most commonly associated with cereal grains are aflatoxins, ochratoxin A, fumonisins, deoxynivalenol and zearalenone. The various food processes that may have effects on mycotoxins include sorting, trimming, cleaning, milling, brewing, cooking, baking, frying, roasting, canning, flaking, alkaline cooking, nixtamalization, and extrusion. Most of the food processes have variable effects on mycotoxins, with those that utilize the highest temperatures having greatest effects. In general the processes reduce mycotoxin concentrations significantly, but do not eliminate them completely. However, roasting and extrusion processing show promise for lowering mycotoxin concentrations, though very high temperatures are needed to bring about much of a reduction in mycotoxin concentrations. Extrusion processing at temperatures greater than 150 degrees C are needed to give good reduction of zearalenone, moderate reduction of alfatoxins, variable to low reduction of deoxynivalenol and good reduction of fumonisins. The greatest reductions of fumonisins occur at extrusion temperatures of 160 degrees C or higher and in the presence of glucose. Extrusion of fumonisin contaminated corn grits with 10% added glucose resulted in 75-85% reduction in Fumonisin B(1) levels. Some fumonisin degredation products are formed during extrusion, including small amounts of hydrolyzed Fumonisin B(1) and N-(Carboxymethyl) - Fumonisin B(1) and somewhat higher amounts of N-(1-deoxy-d-fructos-1-yl) Fumonisin B(1) in extruded grits containing added glucose. Feeding trial toxicity tests in rats with extruded fumonisin contaminated corn grits show some reduction in toxicity of grits extruded with glucose.

  13. Food processing with electrically generated photon irradiation

    Matthews, S.M.

    1985-01-01

    Economic constraints require that a food irradiation processing facility have a throughput of approximately 1 MGy ton/day (0.91 MGy m.t./day) requiring 3 MegaCuries (MCi) of cobalt-60 at each site. This requirement means that the total world amount of cobalt-60 would have to be increased by about 60 percent just to handle the California almond and raisin crop during peak season. It is doubtful that public opinion would allow the increased distribution of radioactive isotopes, with the resultant burden upon the transportation networks, as a price to be paid to eat irradiated food. Electric sources have characteristics that allow the production of more penetrating, uniform, and efficient radiation that is available from nuclear isotopes. The heart of the electric radiation source is the electron accelerator. At present, there are no accelerators commercially available that can meet the requirements for food irradiation processing. However, the U.S. Department of Defense-funded beam weapons programs have provided a very promising accelerator technology at the Lawrence Livermore National Laboratory. If this technology were to be commercialized, it appears that the required accelerators would be available for US$1.5 million apiece, and quite possibly for less than this amount. A conceptual design for a portable electric food irradiation processing machine is presented and analyzed for cost, assuming the required accelerators are available for $1.5 million each. It is shown that food can be processed for 1 kGy for a price of $5.98/ton ($6.59/m.t.)

  14. Food irradiation : estimates of cost of processing

    Krishnamurthy, K.; Bongirwar, D.R.

    1987-01-01

    For estimating the cost of food irradiation, three factors have to be taken into consideration. These are : (1) capital cost incurred on irradiation device and its installation, (2) recurring or running cost which includes maintenance cost and operational expenditure, and (3) product specific cost dependent on the factors specific to the food item to be processed, its storage, handling and distribution. A simple method is proposed to provide estimates of capital costs and running costs and it is applied to prepare a detailed estimate of costs for irradiation processing of onions and fish in India. The cost of processing onions worked out to be between Rs. 40 to 120 per 1000 Kg and for fish Rs 354 per 1000 Kg. These estimates do not take into account transparation costs and fluctuations in marketing procedures. (M.G.B.). 7 tables

  15. Electroporation in food processing and biorefinery.

    Mahnič-Kalamiza, Samo; Vorobiev, Eugène; Miklavčič, Damijan

    2014-12-01

    Electroporation is a method of treatment of plant tissue that due to its nonthermal nature enables preservation of the natural quality, colour and vitamin composition of food products. The range of processes where electroporation was shown to preserve quality, increase extract yield or optimize energy input into the process is overwhelming, though not exhausted; e.g. extraction of valuable compounds and juices, dehydration, cryopreservation, etc. Electroporation is--due to its antimicrobial action--a subject of research as one stage of the pasteurization or sterilization process, as well as a method of plant metabolism stimulation. This paper provides an overview of electroporation as applied to plant materials and electroporation applications in food processing, a quick summary of the basic technical aspects on the topic, and a brief discussion on perspectives for future research and development in the field. The paper is a review in the very broadest sense of the word, written with the purpose of orienting the interested newcomer to the field of electroporation applications in food technology towards the pertinent, highly relevant and more in-depth literature from the respective subdomains of electroporation research.

  16. A novel processed food classification system applied to Australian food composition databases.

    O'Halloran, S A; Lacy, K E; Grimes, C A; Woods, J; Campbell, K J; Nowson, C A

    2017-08-01

    The extent of food processing can affect the nutritional quality of foodstuffs. Categorising foods by the level of processing emphasises the differences in nutritional quality between foods within the same food group and is likely useful for determining dietary processed food consumption. The present study aimed to categorise foods within Australian food composition databases according to the level of food processing using a processed food classification system, as well as assess the variation in the levels of processing within food groups. A processed foods classification system was applied to food and beverage items contained within Australian Food and Nutrient (AUSNUT) 2007 (n = 3874) and AUSNUT 2011-13 (n = 5740). The proportion of Minimally Processed (MP), Processed Culinary Ingredients (PCI) Processed (P) and Ultra Processed (ULP) by AUSNUT food group and the overall proportion of the four processed food categories across AUSNUT 2007 and AUSNUT 2011-13 were calculated. Across the food composition databases, the overall proportions of foods classified as MP, PCI, P and ULP were 27%, 3%, 26% and 44% for AUSNUT 2007 and 38%, 2%, 24% and 36% for AUSNUT 2011-13. Although there was wide variation in the classifications of food processing within the food groups, approximately one-third of foodstuffs were classified as ULP food items across both the 2007 and 2011-13 AUSNUT databases. This Australian processed food classification system will allow researchers to easily quantify the contribution of processed foods within the Australian food supply to assist in assessing the nutritional quality of the dietary intake of population groups. © 2017 The British Dietetic Association Ltd.

  17. Thermal food processing: new technologies and quality issues

    Sun, Da-Wen

    2012-01-01

    .... Part I, Modeling of Thermal Food Processes, discusses the thermal physical properties of foods, recent developments in heat and mass transfer, innovative modeling techniques including artificial...

  18. Safety of vendor-prepared foods: evaluation of 10 processing mobile food vendors in Manhattan.

    Burt, Bryan M.; Volel, Caroline; Finkel, Madelon

    2003-01-01

    OBJECTIVES: Unsanitary food handling is a major public health hazard. There are over 4,100 mobile food vendors operating in New York City, and of these, approximately forty percent are processing vendors--mobile food units on which potentially hazardous food products are handled, prepared, or processed. This pilot study assesses the food handling practices of 10 processing mobile food vendors operating in a 38-block area of midtown Manhattan (New York City) from 43rd Street to 62nd Street bet...

  19. Dosimetric aspects of radiation processing of food and allied products

    Sharma, G.; Bhat, R.M.; Bhatt, B.C.

    2010-01-01

    Full text: Gamma radiation processing in the last 4-5 decades is continuously gaining importance in processing of a wide variety of products, as it can modify physical, chemical and biological properties of the materials, including food and allied products on industrial scale due its inherent qualities like ease of processing in finally packaged form, eco-friendly nature and other obvious reasons over conventional means of processing. Food and allied products are either from agricultural produce or animal origin; they get easily contaminated from soil during harvesting, handling, processing, environment conditions, storage and transport from various types of micro-organisms including pathogens. In many countries it is mandatory to bring down the population of micro-organisms to an acceptable level and complete elimination of pathogens before such products are accepted for human or animal consumption. Processing of food and allied products by radiation has its own challenges due to wider public acceptance of irradiated food, a wide range, 0.25-50kGy, of absorbed dose requirements for different category of such products and purposes, use of a variety of packaging materials in different shapes and sizes and because of its perishable nature. More than 50 countries including India in the world have accepted radiation processing of food and allied products by radiation. Dosimetry is an important aspect of radiation processing, whether it is food or allied product. Uniformity in dose delivered to these products depends on several factors such as product carrier to source frame alignment, product carrier and product/tote box design, product loading pattern, attenuation due to product thickness, product bulk density that varies from 0.1-1.0 kg/l and the plant design whether during processing product overlaps the source or otherwise. In this presentation dosimetric aspects of radiation processing of food and allied products and problems associated with dosimetry of such

  20. Locally processed roasted-maize-based weaning foods fortified with ...

    Locally processed roasted-maize-based weaning foods fortified with legumes: factors ... African Journal of Food, Agriculture, Nutrition and Development ... Tom Brown (roasted-maize porridge) is one of the traditional weaning foods in Ghana.

  1. Use of nanotechnology in food processing, packaging and safety ...

    Use of nanotechnology in food processing, packaging and safety – review. ... application of nanotechnology in food packaging and food contact materials, ... developing active antimicrobial and antifungal surfaces, and sensing as well as ...

  2. Identifying Competencies in the Food Service Industry. Final Report.

    Wagner, Linda M.

    This report documents a research project conducted to ascertain what specific occupational competencies are necessary for employees in the food service industry. Questionnaires were mailed to employers, in restaurants and hospitals and to graduates of high school and postsecondary food service programs. The respondents completed 316 position…

  3. Sectoral Innovation Watch Food and Drinks Sector. Final Sector Report

    Leis, M.; Gijsbers, G.; Zee, F. van der

    2011-01-01

    The food and drinks manufacturing industry is a diverse and complex sector. There are ample possibilities for performance improvement and innovation in the food and drinks industry as well as a variety of challenges ranging from a lack of financial and human resources, fragmented consumer interests

  4. 21 CFR 133.173 - Pasteurized process cheese food.

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Pasteurized process cheese food. 133.173 Section 133.173 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION CHEESES AND RELATED CHEESE PRODUCTS Requirements for Specific...

  5. Rockfall Hazard Process Assessment : Final Project Report

    2017-10-01

    After a decade of using the Rockfall Hazard Rating System (RHRS), the Montana Department of Transportation (MDT) sought a reassessment of their rockfall hazard evaluation process. Their prior system was a slightly modified version of the RHRS and was...

  6. FY-2010 Process Monitoring Technology Final Report

    Orton, Christopher R.; Bryan, Samuel A.; Casella, Amanda J.; Hines, Wes; Levitskaia, Tatiana G.; henkell, J.; Schwantes, Jon M.; Jordan, Elizabeth A.; Lines, Amanda M.; Fraga, Carlos G.; Peterson, James M.; Verdugo, Dawn E.; Christensen, Ronald N.; Peper, Shane M.

    2011-01-01

    During FY 2010, work under the Spectroscopy-Based Process Monitoring task included ordering and receiving four fluid flow meters and four flow visible-near infrared spectrometer cells to be instrumented within the centrifugal contactor system at Pacific Northwest National Laboratory (PNNL). Initial demonstrations of real-time spectroscopic measurements on cold-stream simulants were conducted using plutonium (Pu)/uranium (U) (PUREX) solvent extraction process conditions. The specific test case examined the extraction of neodymium nitrate (Nd(NO3)3) from an aqueous nitric acid (HNO3) feed into a tri-n-butyl phosphate (TBP)/ n-dodecane solvent. Demonstration testing of this system included diverting a sample from the aqueous feed meanwhile monitoring the process in every phase using the on-line spectroscopic process monitoring system. The purpose of this demonstration was to test whether spectroscopic monitoring is capable of determining the mass balance of metal nitrate species involved in a cross-current solvent extraction scheme while also diverting a sample from the system. The diversion scenario involved diverting a portion of the feed from a counter-current extraction system while a continuous extraction experiment was underway. A successful test would demonstrate the ability of the process monitoring system to detect and quantify the diversion of material from the system during a real-time continuous solvent extraction experiment. The system was designed to mimic a PUREX-type extraction process with a bank of four centrifugal contactors. The aqueous feed contained Nd(NO3)3 in HNO3, and the organic phase was composed of TBP/n-dodecane. The amount of sample observed to be diverted by on-line spectroscopic process monitoring was measured to be 3 mmol (3 x 10-3 mol) Nd3+. This value was in excellent agreement with the 2.9 mmol Nd3+ value based on the known mass of sample taken (i.e., diverted) directly from the system feed solution.

  7. Applications of sonochemistry in Russian food processing industry.

    Krasulya, Olga; Shestakov, Sergey; Bogush, Vladimir; Potoroko, Irina; Cherepanov, Pavel; Krasulya, Boris

    2014-11-01

    In food industry, conventional methodologies such as grinding, mixing, and heat treatment are used for food processing and preservation. These processes have been well studied for many centuries and used in the conversion of raw food materials to consumable food products. This report is dedicated to the application of a cost-efficient method of energy transfer caused by acoustic cavitation effects in food processing, overall, having significant impacts on the development of relatively new area of food processing such as food sonochemistry. Copyright © 2014 Elsevier B.V. All rights reserved.

  8. Food irradiation - A new way to process food

    1987-01-01

    The film shows how irradiation of food by ionizing energy (gamma rays or beams of electrons) can help cut down post-harvest losses of food such as cereals, meat, fish and shellfish and fresh or dried fruits and vegetables. One quarter to one third of the total world food production is lost due to sprouting, destruction by insects and parasites, spoilage by micro-organisms such as bacteria and funghi, and premature ripening. Food contamination not only leads to economic problems but can also cause diseases such as trichinosis, toxoplasmosis, etc. The new technique of food irradiation has been studied by independent groups of experts whose evaluations without exception have been favourable. One of the main advantages is that there are no chemical residues. On the long run, food irradiation will help to assure world-wide food security

  9. Guest editorial, special issue on new food processing technologies and food safety

    The microflora of foods is very significant to food producers, processors and consumers and the food manufacturers including distributors are responding to consumers’ demand for food products that are safe, fresher and convenient for use. In some cases foods may be improperly processed and/or contam...

  10. Parton dynamics in hadronic processes. Final report

    Sukhatme, U.P.

    1984-07-01

    We have elucidated several aspects of the dual parton fragmentation model for low transverse momentum multiparticle production in hadronic collisions previously developed by the author and collaborators at Orsay, France. In particular, we have verified that the dual parton model correctly reproduces recently obtained two particle inclusive distributions and particle ratios in the central region of pp and anti pp collisions. This work sheds light on the dynamics of partons in a hadronic collision since it strongly indicates that a valence quark from each initial hadron is held back with a small momentum fraction. Also, we have extended the dual parton approach to include diffraction dissocation and studied the consequences on inclusive pion production in pp interactions. We have investigated the virtues and limitations of logarithmic perturbation theory, which is often a much simpler alternative to standard Rayleigh-Schroedinger perturbation theory. Finally, we have developed and studied the shifted 1/N expansion for the enrgy eigenstates in non-relativistic quantum mechanics. Our results provide an accurate, rapidly convergent, powerful new way of handling any spherically symmetric potential. 18 references

  11. Forecasting the Future Food Service World of Work. Final Report. Volume II. Centralized Food Service Systems. Service Management Reports.

    Powers, Thomas F., Ed.; Swinton, John R., Ed.

    Volume II of a three-volume study on the future of the food service industry considers the effects that centralized food production will have on the future of food production systems. Based on information from the Fair Acres Project and the Michigan State University Vegetable Processing Center, the authors describe the operations of a centralized…

  12. Use of ionising radiation for food processing applications

    Ninjoor, V.

    1989-01-01

    Food irradiation is a recently developed technique used to sterilize and preserve food. Food products are exposed to ionising radiations such as X-rays, gamma rays or high energy electrons which destroy food borne pathogens and parasites and inhibit sprouting. Shelf life of food is extended. The following aspects of radiation processing of food are discussed in the monograph: radiation sources, choice of dose for specific results, safety and nutritional quality of radiation processed food, international status of acceptance of food irradiation, and cost. (M.G.B.). 6 tabs

  13. Combination Processes in Food Irradiation. Proceedings of an International Symposium on Combination Processes in Food Irradiation

    NONE

    1981-09-15

    Statistics show that over forty per cent of the human population, a large portion of which come from the Third World, are suffering from hunger and malnutrition. While the solution to these problems depends to a great extent on the food production strategies of the various governments, equally important is the need to preserve existing food supply by reducing food and crop spoilage. It has been reported that estimated losses due to bacterial spoilage are heavy; those of highly perishable commodities such as fish and fishery products have been reported as amounting to thirty per cent of the total catch. An additional loss of five to ten per cent due to insects and microbes during lengthy periods of drying and/or storage has also been reported. After about thirty years of research, treatment with ionizing radiations has been proved to be a valuable potential tool for reducing post-harvest storage losses and for preserving quickly perishable food from deterioration. Since irradiation is a purely physical method of food conservation, it may for many purposes become the preferred method, for it is an environmentally clean process not tainted with the chemical residue problem, it is energy saving, and it can, in many cases, produce effects that cannot be achieved by conventional techniques (e.g. decontamination of frozen food without significant temperature changes, disinfestation and decontamination of food in bulk and packaged). The preservative effects of ionizing radiations can often be advantageously combined with effects of other physical or chemical agents. The resulting ''combination treatments'' may involve synergistic or cumulative action of the combination partners, leading to a decreased treatment requirement for one or both agents. This in turn may result in cost and/or energy savings and may bring about improvements in the sensory properties and bacteriological quality of the food thus treated. To review progress in this field a Symposium on Combination

  14. Combination Processes in Food Irradiation. Proceedings of an International Symposium on Combination Processes in Food Irradiation

    1981-01-01

    Statistics show that over forty per cent of the human population, a large portion of which come from the Third World, are suffering from hunger and malnutrition. While the solution to these problems depends to a great extent on the food production strategies of the various governments, equally important is the need to preserve existing food supply by reducing food and crop spoilage. It has been reported that estimated losses due to bacterial spoilage are heavy; those of highly perishable commodities such as fish and fishery products have been reported as amounting to thirty per cent of the total catch. An additional loss of five to ten per cent due to insects and microbes during lengthy periods of drying and/or storage has also been reported. After about thirty years of research, treatment with ionizing radiations has been proved to be a valuable potential tool for reducing post-harvest storage losses and for preserving quickly perishable food from deterioration. Since irradiation is a purely physical method of food conservation, it may for many purposes become the preferred method, for it is an environmentally clean process not tainted with the chemical residue problem, it is energy saving, and it can, in many cases, produce effects that cannot be achieved by conventional techniques (e.g. decontamination of frozen food without significant temperature changes, disinfestation and decontamination of food in bulk and packaged). The preservative effects of ionizing radiations can often be advantageously combined with effects of other physical or chemical agents. The resulting ''combination treatments'' may involve synergistic or cumulative action of the combination partners, leading to a decreased treatment requirement for one or both agents. This in turn may result in cost and/or energy savings and may bring about improvements in the sensory properties and bacteriological quality of the food thus treated. To review progress in this field a Symposium on Combination

  15. Introduction of a novel food processing technology- food irradiation

    Nair, P.M.

    1994-01-01

    The treatment of food with ionizing radiation for its preservation is a resurging technology which was lying dormant since its introduction after the discovery on the use of x-ray as an effective way to kill bacteria in food. Large research programmes were initiated on the use of gamma rays for food preservation in many countries and some of the conclusions derived are discussed. 1 fig., 2 tabs

  16. Study of The Final Customer Loyalty Process

    Juan Carlos Fandos

    2013-12-01

    Full Text Available For any business is important to maintain a loyal customer base to help they to survive over time. This situation is accentuated even to the extent that increases competition and increases uncertainty. At present these are two features that are really developed. Because of the deep crisis in which we are, and other elements such as globalization and the development of new technologies and communication systems, we are faced with a scenario of intense competition and uncertainty manifest. It is therefore more necessary than ever to know in depth how to get customers to be faithful, and develop true loyalty strategies.In this paper, we present the sequential approach to the formation of consumer loyalty in order to deepen understanding of the concept. It is supplemented by studying the combined effect of switching costs as an element that promotes the continuity of the relationship. The results shows that the consumer takes a more cognitive process information in their initial assessments of the service and therefore in the early stages of loyalty. As advances in consumer behavior process becomes more direct and mechanic, so we can say that the customer-company bond is stronger.

  17. Application of finite-element-methods in food processing

    Risum, Jørgen

    2004-01-01

    Presentation of the possible use of finite-element-methods in food processing. Examples from diffusion studies are given.......Presentation of the possible use of finite-element-methods in food processing. Examples from diffusion studies are given....

  18. Borehole plugging by compaction process. Final report

    Fernandez, R.; MacGowan, C.; Nolan, E.; Morey, R.; Palty, A.

    1976-08-01

    The requirements of an overall program to preserve the integrity of a repository formation are documented. The repository is intended to be in stable earth stratum used as a safe and permanent storage area for nuclear waste material. These wastes represent an environmental hazard for a period of up to 200,000 years. An engineering analysis, a reliability and quality-assurance program, and a development program for borehole plugging by compaction process, using natural earthen materials, are presented. Part 1 provides the engineering analysis of downhole compaction methods and related instrumentation along with a recommended development plan from concept through a pilot in-situ experiment. Part 2 provides a reliability and quality-assurance program from laboratory testing of materials through an in-situ experiment

  19. Membranes for Food and Bioproduct Processing

    Avram, Alexandru M.

    Modified membranes for process intensification in biomass hydrolysis: Production of biofuels and chemicals from lignocellulosic biomass is one of the leading candidates for replacement of petroleum based fuels and chemicals. However, conversion of lignocellulosic biomass into fuels and chemicals is not cost effective compared to the production of fuels and chemicals from crude oil reserves. Some novel and economically feasible approaches involve the use of ionic liquids as solvents or co-solvents, since these show improved solvation capability of cellulose over simple aqueous systems. Membranes offer unique opportunities for process intensification which involves fractionation of the resulting biomass hydrolysate leading to a more efficient and cheaper operation. This research attempts to develop membranes that would usher the economics of the biochemical conversion of lignocellulosic biomass into fuels and chemicals by recycling the expensive ionic liquid. The overall aim of this work is the development of novel membranes with unique surface properties that enable the selective separation of non-reacted cellulose and hydrolysis sugars from ionic liquids. Nanofiltration separation for application in food product engineering: With the advent of the modern, well-informed consumer who has high expectations from the nutritional value of consumed food products, novel approaches are being developed to produce nutrient-enhanced foods and drinks. As a response to the consumer needs, different techniques to recover, concentrate and retain as much as possible of bioactive compounds are being investigated. Membrane technology has the advantage of selective fractionation of food products (e.g. salt removal, removal of bitter-tasting compounds or removal of sugar for sweet taste adjustment), volume reduction, and product recovery at mild conditions. In this work, we use nanofiltration in dead-end and crossflow mode to concentrate polyphenols from blueberry pomace. Blueberry

  20. Product quality driven food process design

    Hadiyanto, M.

    2007-01-01

    Consumers evaluate food products on their quality, and thus the product quality is a main target in industrial food production. In the last decade there has been a remarkable increase of interest of the food industry to put food product quality central in innovation. However, quality itself is

  1. 48 CFR 852.246-72 - Frozen processed foods.

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Frozen processed foods. 852.246-72 Section 852.246-72 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS... Frozen processed foods. As prescribed in 846.302-72, insert the following clause: Frozen Processed Foods...

  2. 48 CFR 846.302-72 - Frozen processed foods.

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Frozen processed foods... CONTRACT MANAGEMENT QUALITY ASSURANCE Contract Clauses 846.302-72 Frozen processed foods. The contracting officer shall insert the clause at 852.246-72, Frozen processed foods, in solicitations and contracts for...

  3. A review on the beneficial aspects of food processing.

    Boekel, van M.A.J.S.; Fogliano, V.; Pellegrini, N.; Stanton, C.; Scholz, G.; Lalljie, S.P.D.; Somoza, V.; Knorr, D.; Rao Jasti, P.; Eisenbrand, G.

    2010-01-01

    The manuscript reviews beneficial aspects of food processing with main focus on cooking/heat treatment, including other food-processing techniques (e.g. fermentation). Benefits of thermal processing include inactivation of food-borne pathogens, natural toxins or other detrimental constituents,

  4. The MELISSA food data base: space food preparation and process optimization

    Creuly, Catherine; Poughon, Laurent; Pons, A.; Farges, Berangere; Dussap, Claude-Gilles

    Life Support Systems have to deal with air, water and food requirement for a crew, waste management and also to the crew's habitability and safety constraints. Food can be provided from stocks (open loops) or produced during the space flight or on an extraterrestrial base (what implies usually a closed loop system). Finally it is admitted that only biological processes can fulfil the food requirement of life support system. Today, only a strictly vegetarian source range is considered, and this is limited to a very small number of crops compared to the variety available on Earth. Despite these constraints, a successful diet should have enough variety in terms of ingredients and recipes and sufficiently high acceptability in terms of acceptance ratings for individual dishes to remain interesting and palatable over a several months period and an adequate level of nutrients commensurate with the space nutritional requirements. In addition to the nutritional aspects, others parameters have to be considered for the pertinent selection of the dishes as energy consumption (for food production and transformation), quantity of generated waste, preparation time, food processes. This work concerns a global approach called MELISSA Food Database to facilitate the cre-ation and the management of these menus associated to the nutritional, mass, energy and time constraints. The MELISSA Food Database is composed of a database (MySQL based) con-taining multiple information among others crew composition, menu, dishes, recipes, plant and nutritional data and of a web interface (PHP based) to interactively access the database and manage its content. In its current version a crew is defined and a 10 days menu scenario can be created using dishes that could be cooked from a set of limited fresh plant assumed to be produced in the life support system. The nutritional covering, waste produced, mass, time and energy requirements are calculated allowing evaluation of the menu scenario and its

  5. Flexibility Study of a Liquid Food Production Process

    Cheng, Hongyuan; Friis, Alan

    2006-01-01

    Applying process engineering simulation method to model the processing of liquid food can provide a way to build a flexible food factory that can efficiently offer a wide range of tailored products in short delivery time. A milk production process, as an example, is simulated using a process...... engineering software to investigate the process operation conditions and flexibility. The established simulation method can be adapted to simulate similar liquid food production processes through suitable modifications....

  6. Seattle's minimum wage ordinance did not affect supermarket food prices by food processing category.

    Spoden, Amanda L; Buszkiewicz, James H; Drewnowski, Adam; Long, Mark C; Otten, Jennifer J

    2018-06-01

    To examine the impacts of Seattle's minimum wage ordinance on food prices by food processing category. Supermarket food prices were collected for 106 items using a University of Washington Center for Public Health Nutrition market basket at affected and unaffected supermarket chain stores at three times: March 2015 (1-month pre-policy enactment), May 2015 (1-month post-policy enactment) and May 2016 (1-year post-policy enactment). Food items were categorized into four food processing groups, from minimally to ultra-processed. Data were analysed across time using a multilevel, linear difference-in-differences model at the store and price level stratified by level of food processing. Six large supermarket chain stores located in Seattle ('intervention') affected by the policy and six same-chain but unaffected stores in King County ('control'), Washington, USA. One hundred and six food and beverage items. The largest change in average price by food item was +$US 0·53 for 'processed foods' in King County between 1-month post-policy and 1-year post-policy enactment (P food processing level strata in Seattle v. King County stores at 1-month or 1-year post-policy enactment. Supermarket food prices do not appear to be differentially impacted by Seattle's minimum wage ordinance by level of the food's processing. These results suggest that the early implementation of a city-level minimum wage policy does not alter supermarket food prices by level of food processing.

  7. Pulse foods: processing, quality and nutraceutical applications

    Tiwari, Brijesh K; Gowen, Aoife; McKenna, B. M

    2011-01-01

    ... Applications Edited by Brijesh K. Tiwari Department of Food and Tourism, Manchester Metropolitan University, Manchester, UK Aoife Gowen UCD School of Agriculture, Food Science and Veterinary ­ M edicine,...

  8. Technology review of commercial food service equipment - final report

    Rahbar, S; Krsikapa, S [Canadian Gas Research Inst., Don Mills, ON (Canada); Fisher, D; Nickel, J; Ardley, S; Zabrowski, D [Fisher Consultants (Canada); Barker, R F [ed.

    1996-05-15

    Technical information on commercial gas cooking appliances was presented. This second volume provided an appliance-by-appliance comprehensive assessment of the energy performance of commercial food service equipment. Energy assessments were made for the following categories of cooking equipment: fryers, griddles, broilers, ranges, Chinese ranges, ovens, steamers, steam kettles, and braising pans. Recommendations were made for improving the energy efficiency and overall performance of gas appliances to support of the Canadian gas utilities marketing and energy conservation initiatives. 71 refs., 37 tabs., 58 figs.

  9. Radiation processing of food - safety and quality

    Chakraborty, Pratap

    2007-01-01

    Food is vital for human existence. Conservation and preservation of food is a prerequisite for food security and it provides economic stability and self-reliance to a nation. The need to preserve food has been felt by mankind since time immemorial. The seasonal nature of production, long distances between production and consumption centres and rising gap between demand and supply have made this need even more relevant today

  10. Recent developments in analytical detection methods for radiation processed foods

    Wu Jilan

    1993-01-01

    A short summary of the programmes of 'ADMIT' (FAO/IAEA) and the developments in analytical detection methods for radiation processed foods has been given. It is suggested that for promoting the commercialization of radiation processed foods and controlling its quality, one must pay more attention to the study of analytical detection methods of irradiated food

  11. 21 CFR 170.19 - Pesticide chemicals in processed foods.

    2010-04-01

    ... the concentration of the residue in the processed food when ready to eat is not greater than the... processed food when ready to eat is higher than the tolerance prescribed for the raw agricultural commodity... authorized by the regulations in this part. Food that is itself ready to eat, and which contains a higher...

  12. 21 CFR 570.19 - Pesticide chemicals in processed foods.

    2010-04-01

    ... the concentration of the residue in the processed food when ready to eat is not greater than the... processed food when ready to eat is higher than the tolerance prescribed for the raw agricultural commodity... authorized by the regulations in this part. Food that is itself ready to eat, and which contains a higher...

  13. Cooking, industrial processing and caloric density of foods

    Pellegrini, Nicoletta; Fogliano, Vincenzo

    2017-01-01

    During human evolution, the development of a wide range of cooking processing techniques enabled humans to provide their social group with maximum benefits from limited food resources. Industrial processing and mass market distribution made available high food calorie density foods to the world

  14. Make to stock and mix to order : choosing intermediate products in the food-processing industry

    Akkerman, Renzo; van der Meer, Dirk; van Donk, Dirk Pieter

    2010-01-01

    In contrast to discrete manufacturers, food-processing companies can sometimes produce the same end products in different ways: either mix first and then process, or process first and mix later. Moreover, a final product can be mixed from different raw materials or intermediates. That adds a new

  15. Food Additives Permitted for Direct Addition to Food for Human Consumption; Folic Acid. Final rule.

    2016-04-15

    The Food and Drug Administration (FDA or we) is amending the food additive regulations to provide for the safe use of folic acid in corn masa flour. We are taking this action in response to a food additive petition filed jointly by Gruma Corporation, Spina Bifida Association, March of Dimes Foundation, American Academy of Pediatrics, Royal DSM N.V., and National Council of La Raza.

  16. FOOD safety and hygiene - Systematic layout planning of food processes

    Van Donk, DP; Gaalman, G

    2004-01-01

    Hygiene and food safety have been dealt with from different fields of science such as biology and health, and from different angles such as HACCP and GMP. Little systematically ordered knowledge is available for the analysis of a layout, taking hygienic factors into account. HACCP and GMP are

  17. Final Rule for Industrial Process Cooling Towers: Fact Sheet

    Fact sheet concerning a final rule to reduce air toxics emissions from industrial process cooling towers. Air toxics are those pollutants known or suspected of causing cancer or other serious health effects.

  18. Sodium monitoring in commercially processed and restaurant foods.

    Ahuja, Jaspreet K C; Pehrsson, Pamela R; Haytowitz, David B; Wasswa-Kintu, Shirley; Nickle, Melissa; Showell, Bethany; Thomas, Robin; Roseland, Janet; Williams, Juhi; Khan, Mona; Nguyen, Quynhanh; Hoy, Kathy; Martin, Carrie; Rhodes, Donna; Moshfegh, Alanna; Gillespie, Cathleen; Gunn, Janelle; Merritt, Robert; Cogswell, Mary

    2015-03-01

    Most sodium in the US diet comes from commercially processed and restaurant foods. Sodium reduction in these foods is key to several recent public health efforts. The objective was to provide an overview of a program led by the USDA, in partnership with other government agencies, to monitor sodium contents in commercially processed and restaurant foods in the United States. We also present comparisons of nutrients generated under the program to older data. We track ∼125 commercially processed and restaurant food items ("sentinel foods") annually using information from food manufacturers and periodically by nationwide sampling and laboratory analyses. In addition, we monitor >1100 other commercially processed and restaurant food items, termed "priority-2 foods" (P2Fs) biennially by using information from food manufacturers. These foods serve as indicators for assessing changes in the sodium content of commercially processed and restaurant foods in the United States. We sampled all sentinel foods nationwide and reviewed all P2Fs in 2010-2013 to determine baseline sodium concentrations. We updated sodium values for 73 sentinel foods and 551 P2Fs in the USDA's National Nutrient Database for Standard Reference (releases 23-26). Sodium values changed by at least 10% for 43 of the sentinel foods, which, for 31 foods, including commonly consumed foods such as bread, tomato catsup, and potato chips, the newer sodium values were lower. Changes in the concentrations of related nutrients (total and saturated fat, total sugar, potassium, or dietary fiber) that were recommended by the 2010 Dietary Guidelines for Americans for reduced or increased consumption accompanied sodium reduction. The results of sodium reduction efforts, based on resampling of the sentinel foods or re-review of P2Fs, will become available beginning in 2015. This monitoring program tracks sodium reduction efforts, improves food composition databases, and strengthens national nutrition monitoring. © 2015

  19. Impact of food processing and storage conditions on nitrate content in canned vegetable-based infant foods.

    Tamme, T; Reinik, M; Roasto, M; Meremäe, K; Kiis, A

    2009-08-01

    The nitrate and nitrite contents were determined in canned vegetable-based infant foods of five varieties. Furthermore, changes in nitrate content during industrial processing were studied. Samples were taken from raw materials, homogenized mixtures, and final products after sterilization, and then analyzed for nitrate and nitrite content by high-pressure liquid chromatography. Processing steps preceding heat treatment, such as vegetable peeling and washing, decreased the nitrate concentrations in the range of 17 to 52%. During processing, the nitrate content in canned infant foods decreased 39 to 50%, compared with nitrate concentration in the raw-vegetable mixture. The final nitrate concentration in infant foods depends mainly on the initial nitrate content of the raw-vegetable mixture. The effect of storage time (24 and 48 h) and temperature (4 to 6 degrees C and 20 to 22 degrees C) on nitrate and nitrite content in opened canned infant-food samples was studied. After 24 h of storage at refrigerated and room temperatures, the mean nitrate content increased on average by 7 and 13%, and after 48 h of storage by 15 and 29%, respectively. The nitrite content in all analyzed samples was below the quantification limit. Storage requirements of industrial manufacturers must be followed strictly. Opened can foods, stored under refrigerated conditions, have to be consumed within 2 days, as recommended by manufacturers. The infant-food producers must pay more attention to the quality of raw materials. Nitrate content analyses should be added as compulsory tests to the quality assurance programs.

  20. Minimally processed foods are more satiating and less hyperglycemic than ultra-processed foods: a preliminary study with 98 ready-to-eat foods.

    Fardet, Anthony

    2016-05-18

    Beyond nutritional composition, food structure is increasingly recognized to play a role in food health potential, notably in satiety and glycemic responses. Food structure is also highly dependent on processing conditions. The hypothesis for this study is, based on a data set of 98 ready-to-eat foods, that the degree of food processing would correlate with the satiety index (SI) and glycemic response. Glycemic response was evaluated according to two indices: the glycemic index (GI) and a newly designed index, the glycemic glucose equivalent (GGE). The GGE indicates how a quantity of a certain food affects blood glucose levels by identifying the amount of food glucose that would have an effect equivalent to that of the food. Then, foods were clustered within three processing groups based on the international NOVA classification: (1) raw and minimally processed foods; (2) processed foods; and (3) ultra-processed foods. Ultra-processed foods are industrial formulations of substances extracted or derived from food and additives, typically with five or more and usually many (cheap) ingredients. The data were correlated by nonparametric Spearman's rank correlation coefficient on quantitative data. The main results show strong correlations between GGE, SI and the degree of food processing, while GI is not correlated with the degree of processing. Thus, the more food is processed, the higher the glycemic response and the lower its satiety potential. The study suggests that complex, natural, minimally and/or processed foods should be encouraged for consumption rather than highly unstructured and ultra-processed foods when choosing weakly hyperglycemic and satiating foods.

  1. Technology review of commercial food service equipment - final report

    Rahbar, S; Krsikapa, S [Canadian Gas Research Inst., Don Mills, ON (Canada); Fisher, D; Nickel, J; Ardley, S; Zabrowski, D [Fisher Consultants (Canada); Barker, R F [ed.

    1996-05-15

    Market and technical information on gas fired equipment used in the commercial food service sector in Canada and in each province or territory was presented. Results of a market study and technology review were integrated to establish energy consumption and energy saving potential in this sector. Eight categories of commercial cooking appliances were studied. They were: fryers, griddles, broilers, ranges, ovens, tilting skillets, steam kettles and steamers. Focus was on gas fired appliances, although electric appliances were also included. The total energy consumption of the appliances was estimated at 76,140.37 GBtu in 1994. Gas appliances accounted for 63 per cent of the total inventory and consumed 83 per cent of the total energy used. Cooking energy efficiencies for the gas fired commercial cooking equipment ranged from 10 per cent to 60 per cent. The electric appliances had cooking energy efficiencies ranging from 35 per cent to 95 per cent. A list of recommendations were made for the many opportunities to introduce higher efficiency commercial cooking appliances, essential to slow down or to stabilize the energy consumption of cooking appliances over the next decade. 66 refs., 14 tabs., 18 figs.

  2. The Efficiency of Halal Processed Food Industry in Malaysia

    Mohd Ali Mohd Noor

    2016-06-01

    Full Text Available Efficiency is indispensable for an industry to ensure cost reduction and profit maximization. It also helps the industry to be competitive and remain in the market. In 2010, Malaysia aims to be the world halal hub. The hub should capture at least five percent of the world halal market with at least 10,000 exporting firms. However the hub failed due to the small number of firms efficiency that finally contribute to less number of firms export. Thus, this study aimed to measure the efficiency of halal processed food industry in Malaysia using Data Envelopment Analysis (DEA. Input variables used were local raw inputs, labour, and monetary assets of halal food industry in Malaysia. Meanwhile the output used was the total sales revenue of the halal industry in Malaysia. The study shows that very few indusries are efficient in each category led by meat, dairy, cordials and juices, marine products, food crops, and grains industry. Therefore, the government needs to emphasize on industry’s efficiency to be competitive and be the world halal hub in the future.

  3. Radiation processing of dry food ingredients - a review

    Farkas, J.

    1985-01-01

    Radiation decontamination of dry ingredients, herbs and enzyme preparations is a technically feasible, economically viable and safe physical process. The procedure is direct, simple, requires no additives, does not leave residues and is highly efficient. Its dose requirement is moderate. Radiation doses of 3 to 10 kGy proved to be sufficient to reduce the viable cell counts to a satisfactory level. Ionizing radiations do not cause any significant rise in temperature and the flavour, texture or other important technological or sensory properties of most ingredients are not influenced at radiation doses necessary for a satisfactory decontamination. The microflora surviving the cell-count reduction by irradiation is more sensitive to subsequent food processing treatments than the microflora of untreated ingredients. Recontamination can be prevented since the product can be irradiated in its final packaging. Irradiation can be carried out in commercial containers and it results in considerable savings of energy and labour as compared to alternative decontamination techniques. Radiation processing of dry ingredients is an emerging technology in several countries and more and more clearances on irradiated foods are issued or expected to be granted in the near future. (author)

  4. Radiation processing of dry food ingredients - a review

    Farkas, J

    1985-01-01

    Radiation decontamination of dry ingredients, herbs and enzyme preparations is a technically feasible, economically viable and safe physical process. The procedure is direct, simple, requires no additives, does not leave residues and is highly efficient. Its dose requirement is moderate. Radiation doses of 3 to 10 kGy proved to be sufficient to reduce the viable cell counts to a satisfactory level. Ionizing radiations do not cause any significant rise in temperature and the flavour, texture or other important technological or sensory properties of most ingredients are not influenced at radiation doses necessary for a satisfactory decontamination. The microflora surviving the cell-count reduction by irradiation is more sensitive to subsequent food processing treatments than the microflora of untreated ingredients. Recontamination can be prevented since the product can be irradiated in its final packaging. Irradiation can be carried out in commercial containers and it results in considerable savings of energy and labour as compared to alternative decontamination techniques. Radiation processing of dry ingredients is an emerging technology in several countries and more and more clearances on irradiated foods are issued or expected to be granted in the near future.

  5. Prospects of using natural antioxidants in radiation processed food

    Kanatt, S.R.; Chander, Ramesh; Sharma, Arun

    2006-01-01

    Full text: Microbial contamination of food is a serious concern both for food producer and consumer. Radiation processing of food is one of the most effective technologies that can extend the shelf-life and eliminate pathogenic bacteria in food. However, wide acceptability of radiation processed food products will depend upon quality parameters such as oxidative changes, color stability and organoleptic attributes. Any food processing technique is known to accelerate lipid peroxidation and radiation processing is no exception. Irradiation does not adversely affect the overall nutritive value of food and the oxidative changes induced by irradiation are similar to those observed using conventional food processing methods. Combination of various processing conditions such as storage and cooking, results in accelerated oxidative deterioration. The growing demand for convenience foods and the evolving markets for pre cooked food, call for techniques to prevent lipid oxidation in prepared stored food. Products of lipid peroxidation adversely affect the color, flavor and texture of the food. It is therefore necessary to control these changes for better product development. Methods commonly employed by the food industry include the use of antioxidants. Presently, most of the antioxidants used are synthetic but consumer concern has become a driving force for exploring the use of natural antioxidants. The increase interest in substitution of synthetic antioxidants with natural antioxidants has fostered research on screening of plant materials in order to identify new compounds. We have investigated the antioxidant potential of several plant extracts, herbs and waste generated by the food industry, such as potato peel, banana peel, mango peel, mint, cinnamon extracts and chitosan. Mint extract was found to have the maximum antioxidant activity as tested by several in vitro antioxidant assays. The antioxidant activity of mint extract was comparable to that of BHT the commonly

  6. Food labeling: health claims; D-tagatose and dental caries. Final rule.

    2003-07-03

    The Food and Drug Administration (FDA) is adopting as a final rule, without change, the provisions of the interim final rule that amended the regulation authorizing a health claim on sugar alcohols and dental caries, i.e., tooth decay, to include the sugar D-tagatose as a substance eligible for the dental caries health claim. FDA is taking this action to complete the rulemaking initiated with the interim final rule.

  7. Applications of edible films and coatings to processed foods

    Edible coatings have been successfully applied in processed foods such as meat, cereals, confectionaries, dried fruits, nuts and fresh and fresh-cut fruits and vegetables. These coatings are used to improve the quality and shelf-life of foods. Furthermore, different food ingredients, derived from ...

  8. Cold plasma as a nonthermal food processing technology

    Contamination of meats, seafood, poultry, eggs, and fresh and fresh-cut fruits and vegetables is an ongoing concern. Although well-established in non-food applications for surface treatment and modification, cold plasma is a relatively new food safety intervention. As a nonthermal food processing te...

  9. Persistence and survival of pathogens in dry foods and dry food processing environments

    Beuchat, L.; Komitopoulou, E.; Betts, R.; Beckers, H.; Bourdichon, F.; Joosten, H.; Fanning, S.; ter Kuile, B.

    2011-01-01

    Low-moisture foods and food ingredients, i.e., those appearing to be dry or that have been subjected to a drying process, represent important nutritional constituents of human diets. Some of these foods are naturally low in moisture, such as cereals, honey and nuts, whereas others are produced from

  10. Global food chains and environment: agro-food production and processing in Thailand

    Sriwichailamphan, T.H.

    2007-01-01

    In this study on the global food chain and the environment, the objective is to understand the dynamics of food safety and environmental improvements among the large and medium-sized agro-food processing industries and farmers in Thailand that operate in the global market. This study assesses

  11. Engineering concepts for food processing in bioregenerative life support systems.

    Hunter, J B

    1999-01-01

    Long-duration manned missions, such as Mars exploration, will require development of new and cost-effective food production and delivery systems. Requirements for both carry-on preserved food and food processed from on-board crops exceed the capabilities of existing food processing and preservation technologies. For the transit phase, new food products, preservation methods, and processing technologies for ground-based food processing are required. The bioregenerative surface phase requires methods for processing of in situ-grown crops, treatment of food wastes, preparation of daily meals, and design of nutritious and appealing plant-based menus, all within severe cost and labor constraints. In design of the food supply for a long-term mission, the designers must select and apply both the packaged food and in situ processing technologies most appropriate for the specific mission requirements. This study aims to evaluate the strengths and weaknesses of different food system strategies in the context of different types of mission, and to point out the most important areas for future technology development.

  12. Irradiation processing of food items for exports

    Sareen, Shashi

    1998-01-01

    Globalization has led to rapid increases in international food trade. About 460 million metric tonnes of foodstuffs are traded annually of a value to the order of 300 billion US dollar. With such high trade figures, it is imperative to provide safe and nutritious foods to consumers and to minimize food losses due to spoilage. Food irradiation is a technology which has been under study and debate since fifties for the purpose of food preservation. This technology has been extensively reviewed and studied at international levels and by several countries and on the basis of these, a number of countries have permitted the use of irradiation for specified foods and are also applying it on commercial scale. In this paper, a review of the status and importance of this technology has been brought out to include the application of the technology and its perceived benefits, acceptance of the technology at the international level and by different countries including the scenario in India, the various types of concerns expressed by Governments as well as consumers and specific areas with regard to exports for which the technology would be beneficial. (author)

  13. Use of Foodomics for Control of Food Processing and Assessing of Food Safety.

    Josić, D; Peršurić, Ž; Rešetar, D; Martinović, T; Saftić, L; Kraljević Pavelić, S

    Food chain, food safety, and food-processing sectors face new challenges due to globalization of food chain and changes in the modern consumer preferences. In addition, gradually increasing microbial resistance, changes in climate, and human errors in food handling remain a pending barrier for the efficient global food safety management. Consequently, a need for development, validation, and implementation of rapid, sensitive, and accurate methods for assessment of food safety often termed as foodomics methods is required. Even though, the growing role of these high-throughput foodomic methods based on genomic, transcriptomic, proteomic, and metabolomic techniques has yet to be completely acknowledged by the regulatory agencies and bodies. The sensitivity and accuracy of these methods are superior to previously used standard analytical procedures and new methods are suitable to address a number of novel requirements posed by the food production sector and global food market. © 2017 Elsevier Inc. All rights reserved.

  14. The Maillard reaction and its control during food processing. The potential of emerging technologies.

    Jaeger, H; Janositz, A; Knorr, D

    2010-06-01

    The Maillard reaction between reducing sugars and amino acids is a common reaction in foods which undergo thermal processing. Desired consequences like the formation of flavor and brown color of some cooked foods but also the destruction of essential amino acids and the production of anti-nutritive compounds require the consideration of the Maillard reaction and relevant mechanisms for its control. This paper aims to exemplify the recent advances in food processing with regard to the controllability of heat-induced changes in the food quality. Firstly, improved thermal technologies, such as ohmic heating, which allows direct heating of the product and overcoming the heat transfer limitations of conventional thermal processing are presented in terms of their applicability to reduce the thermal exposure during food preservation. Secondly, non-thermal technologies such as high hydrostatic pressure and pulsed electric fields and their ability to extend the shelf life of food products without the application of heat, thus also preserving the quality attributes of the food, will be discussed. Finally, an innovative method for the removal of Maillard reaction substrates in food raw materials by the application of pulsed electric field cell disintegration and extraction as well as enzymatic conversion is presented in order to demonstrate the potential of the combination of processes to control the occurrence of the Maillard reaction in food processing. (c) 2009 Elsevier Masson SAS. All rights reserved.

  15. Nonthermal food processing alternatives and their effects on taste and flavor compounds of beverages.

    Ortega-Rivas, Enrique; Salmerón-Ochoa, Iván

    2014-01-01

    Food drinks are normally processed to increase their shelf-life and facilitate distribution before consumption. Thermal pasteurization is quite efficient in preventing microbial spoilage of many types of beverages, but the applied heat may also cause undesirable biochemical and nutritious changes that may affect sensory attributes of the final product. Alternative methods of pasteurization that do not include direct heat have been investigated in order to obtain products safe for consumption, but with sensory attributes maintained as unchanged as possible. Food scientists interested in nonthermal food preservation technologies have claimed that such methods of preserving foods are equally efficient in microbial inactivation as compared with conventional thermal means of food processing. Researchers in the nonthermal food preservation area also affirm that alternative preservation technologies will not affect, as much as thermal processes, nutritional and sensory attributes of processed foods. This article reviews research in nonthermal food preservation, focusing on effects of processing of food drinks such as fruit juices and dairy products. Analytical techniques used to identify volatile flavor-aroma compounds will be reviewed and comparative effects for both thermal and nonthermal preservation technologies will be discussed.

  16. [Food prices in Brazil: prefer cooking to ultra-processed foods].

    Claro, Rafael Moreira; Maia, Emanuella Gomes; Costa, Bruna Vieira de Lima; Diniz, Danielle Pereira

    2016-08-29

    This study aims to describe the prices of food groups consumed in Brazil considering the nature, extent, and purpose of their processing. Data were obtained from the Brazilian Household Budget Survey for 2008-2009. The mean prices of the groups (natural, cooking ingredients, processed, and ultra-processed) and their respective food subgroups were estimated for Brazil according to income, region, and area. Natural products and cooking ingredients showed lower prices per calorie when compared to the other groups, suggesting an economic advantage to preparing meals at home when compared to replacing them with ultra-processed foods. Families with the highest income paid the highest prices for their food, while families in the Northeast and North regions and rural areas paid the lowest. While fresh foods (meat, milk, fruit, and vegetables) tend to cost more than ultra-processed foods, dry grains (like rice and beans) are a more economical alternative for adopting healthy eating practices.

  17. Final-state interaction in processes of deuteron breaking

    Thome Filho, Z.D.

    1974-12-01

    Interaction between particles in the final state of reactions can strongly affect the experimental angular distributions, as in the scattering processes with the breaking of the deuteron target, where the final state interaction is responsible for the disappearance of the differential cross section in the front direction. It is then necessary to include the contribution of the final state interaction to small angles of incoherent processes particle-deuteron. In this work line, an analysis is made of the process πd → πpn for different values of the incident energy. The data obtained are compared with existing experimental data. The hypothesis is also considered of the nucleon which collides with the incident particle being outside the mass layer. An analytical extension of the resonant amplitude πN outwards the mass layer is also used

  18. Advanced Manufacturing Systems in Food Processing and Packaging Industry

    Sani, Mohd Shafie; Aziz, Faieza Abdul

    2013-01-01

    In this paper, several advanced manufacturing systems in food processing and packaging industry are reviewed, including: biodegradable smart packaging and Nano composites, advanced automation control system consists of fieldbus technology, distributed control system and food safety inspection features. The main purpose of current technology in food processing and packaging industry is discussed due to major concern on efficiency of the plant process, productivity, quality, as well as safety. These application were chosen because they are robust, flexible, reconfigurable, preserve the quality of the food, and efficient.

  19. Advanced Manufacturing Systems in Food Processing and Packaging Industry

    Shafie Sani, Mohd; Aziz, Faieza Abdul

    2013-06-01

    In this paper, several advanced manufacturing systems in food processing and packaging industry are reviewed, including: biodegradable smart packaging and Nano composites, advanced automation control system consists of fieldbus technology, distributed control system and food safety inspection features. The main purpose of current technology in food processing and packaging industry is discussed due to major concern on efficiency of the plant process, productivity, quality, as well as safety. These application were chosen because they are robust, flexible, reconfigurable, preserve the quality of the food, and efficient.

  20. Engineering aspects of rate-related processes in food manufacturing.

    Adachi, Shuji

    2015-01-01

    Many rate-related phenomena occur in food manufacturing processes. This review addresses four of them, all of which are topics that the author has studied in order to design food manufacturing processes that are favorable from the standpoint of food engineering. They include chromatographic separation through continuous separation with a simulated moving adsorber, lipid oxidation kinetics in emulsions and microencapsulated systems, kinetic analysis and extraction in subcritical water, and water migration in pasta.

  1. Bacterial desorption from food container and food processing surfaces.

    McEldowney, S; Fletcher, M

    1988-03-01

    The desorption ofStaphylococcus aureus, Acinetobacter calcoaceticus, and a coryneform from the surfaces of materials used for manufacturing food containers (glass, tin plate, and polypropylene) or postprocess canning factory conveyor belts (stainless steel and nylon) was investigated. The effect of time, pH, temperature, and adsorbed organic layers on desorption was studied.S. aureus did not detach from the substrata at any pH investigated (between pH 5 and 9).A. calcoaceticus and the coryneform in some cases detached, depending upon pH and substratum composition. The degree of bacterial detachment from the substrata was not related to bacterial respiration at experimental pH values. Bacterial desorption was not affected by temperature (4-30°C) nor by an adsorbed layer of peptone and yeast extract on the substrata. The results indicate that bacterial desorption, hence bacterial removal during cleaning or their transfer via liquids flowing over colonized surfaces, is likely to vary with the surface composition and the bacterial species colonizing the surfaces.

  2. An introduction to the irradiation processing of foods

    Hackwood, S.

    1991-01-01

    The food industry has used a variety of methods over the years to preserve or extend the shelf life of food. These have included cooking, packaging, smoking, chilling, freezing, dehydrating and using chemical additives. More recently, ionising radiation has been used to extend the storage life of foods. More research has been focussed on the effects of irradiation on foods than has been directed at any other form of food processing. This research has spanned 40 years and has been carried out in many countries. Food irradiation can be used to: (a) inhibit the sprouting of vegetables; (b) delay the ripening of fruits; (c) kill insect pests in fruit, grains or spices; (d) reduce or eliminate food spoilage organisms; (e) reduce food poisoning bacteria on some meats and sea food products. This chapter includes sections on the historical background; general aspects of radiation; scientific, technological, microbiological and toxicological aspects of food irradiation; nutritional aspects of food irradiation; consumer attitudes; current status and legislation; labelling. It concludes that the relatively new process of preserving food by irradiation compliments rather than competes with the presently available traditional methods. (author)

  3. 40 CFR 52.279 - Food processing facilities.

    2010-07-01

    ... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Food processing facilities. 52.279 Section 52.279 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS California § 52.279 Food processing facilities. (a) The following regulations are disapproved...

  4. Monitoring Industrial Food Processes Using Spectroscopy & Chemometrics

    Pedersen, Dorthe Kjær; Engelsen, Søren Balling

    2001-01-01

    In the last decade rapid spectroscopic measurements have revolutionized quality control in practically all areas of primary food and feed production. Near-infrared spectroscopy (NIR & NIT) has been implemented for monitoring the quality of millions of samples of cereals, milk and meat with unprec......In the last decade rapid spectroscopic measurements have revolutionized quality control in practically all areas of primary food and feed production. Near-infrared spectroscopy (NIR & NIT) has been implemented for monitoring the quality of millions of samples of cereals, milk and meat...

  5. Novel approaches in food-processing technology: new technologies for preserving foods and modifying function.

    Knorr, D

    1999-10-01

    Recent advances in emerging food-processing technologies, such as high hydrostatic pressure or high-intensity electric field pulses, allow targeted and sophisticated modification and preservation of foods. We are beginning to understand the mechanisms involved in pressure inactivation of bacterial spores and have been collecting considerable amounts of kinetic data regarding inactivation mechanisms of enzymes and vegetative microorganisms. We are also gaining more insight into the permeabilization of plant membranes and related biosynthetic responses, making progress in food structure engineering and food modification for function, and have been initiating process developments for gentle processing of delicate biomaterials based on pressure-assisted phase transitions of water.

  6. Tutorial - applying extreme value theory to characterize food-processing systems

    Skou, Peter Bæk; Holroyd, Stephen E.; van der Berg, Franciscus Winfried J

    2017-01-01

    This tutorial presents extreme value theory (EVT) as an analytical tool in process characterization and shows its potential to describe production performance, eg, across different factories, via reliable estimates of the frequency and scale of extreme events. Two alternative EVT methods...... are discussed: point over threshold and block maxima. We illustrate the theoretical framework for EVT by process data from two different examples from the food-processing industry. Finally, we discuss limitations, decisions, and possibilities when applying EVT for process data....

  7. Safety of vendor-prepared foods: evaluation of 10 processing mobile food vendors in Manhattan.

    Burt, Bryan M; Volel, Caroline; Finkel, Madelon

    2003-01-01

    Unsanitary food handling is a major public health hazard. There are over 4,100 mobile food vendors operating in New York City, and of these, approximately forty percent are processing vendors--mobile food units on which potentially hazardous food products are handled, prepared, or processed. This pilot study assesses the food handling practices of 10 processing mobile food vendors operating in a 38-block area of midtown Manhattan (New York City) from 43rd Street to 62nd Street between Madison and Sixth Avenues, and compares them to regulations stipulated in the New York City Health Code. Ten processing mobile food vendors located in midtown Manhattan were observed for a period of 20 minutes each. Unsanitary food handling practices, food storage at potentially unsafe temperatures, and food contamination with uncooked meat or poultry were recorded. Over half of all vendors (67%) were found to contact served foods with bare hands. Four vendors were observed vending with visibly dirty hands or gloves and no vendor once washed his or her hands or changed gloves in the 20-minute observation period. Seven vendors had previously cooked meat products stored at unsafe temperatures on non-heating or non-cooking portions of the vendor cart for the duration of the observation. Four vendors were observed to contaminate served foods with uncooked meat or poultry. Each of these actions violates the New York City Code of Health and potentially jeopardizes the safety of these vendor-prepared foods. More stringent adherence to food safety regulations should be promoted by the New York City Department of Health.

  8. Stability of prebiotic, laminaran oligosaccharide under food processing conditions

    Chamidah, A.

    2018-04-01

    Prebiotic stability tests on laminaran oligosaccharide under food processing conditions were urgently performed to determine the ability of prebiotics deal with processing. Laminaran, oligosaccharide is produced from enzymatic hydrolysis. To further apply this prebiotic, it is necessary to test its performance on food processing. Single prebiotic or in combination with probiotic can improve human digestive health. The effectiveness evaluation of prebiotic should be taken into account in regards its chemical and functional stabilities. This study aims to investigate the stability of laminaran, oligosaccharide under food processing condition.

  9. Aspects of food processing and its effect on allergen structure.

    Paschke, Angelika

    2009-08-01

    The article summarizes current physical and chemical methods in food processing as storage, preparation, separation, isolation or purification and thermal application on the one hand as well as enzymatic treatment on the other and their impact on the properties of food proteins. Novel methods of food processing like high pressure, electric field application or irradiation and their impact on food allergens are presented. The EU project REDALL (Reduced Allergenicity of Processed Foods, Containing Animal Allergens: QLK1-CT-2002-02687) showed that by a combination of enzyme and heat treatment the allergic potential of hen's egg decreased about 100 fold. Clinical reactions do not appear anymore. An AiF-FV 12024 N project worked with fruits like mango, lychee and apple. Processed mango and lychee had no change in allergenic potential during heating while e. g. canning. Apple almost lost its allergenic potential after pasteurization in juice production.

  10. Development of food preservation and processing techniques by radiation

    Byun, Myung Woo; Lee, Ju Woon; Kim, Dong Ho [KAERI, Taejon (Korea, Republic of); Yook, Hong Sun [Chungnam National Univ., Taejon (Korea, Republic of); Kim, Hak Soo [Sogang Univ., Seoul (Korea, Republic of); Lee, Cherl Ho; Park, Hyun Jin [Korea Univ., Seoul (Korea, Republic of); Kang, Il Jun [Hallym Univ., Chuncheon (Korea, Republic of); Kwon, Jung Ho [Kyungbook National Univ., Taegu (Korea, Republic of)

    2002-05-01

    To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following; Processing techniques of low salted and fermented fish using gamma irradiation were developed and superiority of using irradiation to conventional food processing methods was established. Processing technique of value-added functional materials for the manufacture of food or public health products using RT/BT/NT combination technology was developed. The basic theories for the technology development to reduce toxic or undesirable compounds in food such as allergy or carcinogens were established. Exterminating methods of quarantine organisms in herbs/spices was established and the quality evaluation and detection conditions in quarantine treatment were set. From the studies on 'program of public understanding' based on safety of the gamma irradiated food, the information for public relation in enlargement of consumer acceptance/implementation and the peaceful use of nuclear energy were secured. Results from the research project will contribute on improvement of competency of domestic food industry and export market. The results also expect the improvement of public health by prevention of food borne diseases and enhancement of national economy and industry by increase of direct/indirect productivity.

  11. Development of food preservation and processing techniques by radiation

    Byun, Myung Woo; Lee, Ju Woon; Kim, Dong Ho; Yook, Hong Sun; Kim, Hak Soo; Lee, Cherl Ho; Park, Hyun Jin; Kang, Il Jun; Kwon, Jung Ho

    2002-05-01

    To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following; Processing techniques of low salted and fermented fish using gamma irradiation were developed and superiority of using irradiation to conventional food processing methods was established. Processing technique of value-added functional materials for the manufacture of food or public health products using RT/BT/NT combination technology was developed. The basic theories for the technology development to reduce toxic or undesirable compounds in food such as allergy or carcinogens were established. Exterminating methods of quarantine organisms in herbs/spices was established and the quality evaluation and detection conditions in quarantine treatment were set. From the studies on 'program of public understanding' based on safety of the gamma irradiated food, the information for public relation in enlargement of consumer acceptance/implementation and the peaceful use of nuclear energy were secured. Results from the research project will contribute on improvement of competency of domestic food industry and export market. The results also expect the improvement of public health by prevention of food borne diseases and enhancement of national economy and industry by increase of direct/indirect productivity

  12. Development of food preservation and processing techniques by radiation

    Byun, Myung Woo; Lee, Ju Woon; Kim, Dong Ho [KAERI, Taejon (Korea, Republic of); Yook, Hong Sun [Chungnam National Univ., Taejon (Korea, Republic of); Kim, Hak Soo [Sogang Univ., Seoul (Korea, Republic of); Lee, Cherl Ho; Park, Hyun Jin [Korea Univ., Seoul (Korea, Republic of); Kang, Il Jun [Hallym Univ., Chuncheon (Korea, Republic of); Kwon, Jung Ho [Kyungbook National Univ., Taegu (Korea, Republic of)

    2002-05-01

    To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following; Processing techniques of low salted and fermented fish using gamma irradiation were developed and superiority of using irradiation to conventional food processing methods was established. Processing technique of value-added functional materials for the manufacture of food or public health products using RT/BT/NT combination technology was developed. The basic theories for the technology development to reduce toxic or undesirable compounds in food such as allergy or carcinogens were established. Exterminating methods of quarantine organisms in herbs/spices was established and the quality evaluation and detection conditions in quarantine treatment were set. From the studies on 'program of public understanding' based on safety of the gamma irradiated food, the information for public relation in enlargement of consumer acceptance/implementation and the peaceful use of nuclear energy were secured. Results from the research project will contribute on improvement of competency of domestic food industry and export market. The results also expect the improvement of public health by prevention of food borne diseases and enhancement of national economy and industry by increase of direct/indirect productivity.

  13. Key issues in food processing by irradiation in developing countries and the ensuing regulatory aspects

    Mossel, D A. A

    1986-12-31

    Food irradiation offers tremendous potential as a means of food preservation, particularly for developing countries. Irradiating food on a commercial scale has distinct advantages. Through irradiation, the keeping quality of a variety of food will be increased, insect infestation will be controlled, and dangerous intestinal pathogens will be eliminated. It will also facilitate export of food, which will aid national economic development, provide employment opportunities and foster the development of personnel trained in the technology. While food irradiation may be of importance and use in developing countries, it is equally important that developing countries are not used as `testing grounds` for commercial food irradiation. By and large, public reluctance to accept food irradiation is deep-rooted. Fears need to be allayed through exposure to research results and extensive talks by experts and individuals from research institutions and the United Nations. If such attempts fail, it may be necessary for the government to embark on a program of introducing alternative food processes or technologies, e.g. food dehydration, fermentation, thermal or chemical treatments. In the eventual adoption of food irradiation, inspection of plants and manufacturing and distribution practices, monitoring of production lines, and testing of final product samples will be necessary

  14. Key issues in food processing by irradiation in developing countries and the ensuing regulatory aspects

    Mossel, D. A. A.

    1985-01-01

    Food irradiation offers tremendous potential as a means of food preservation, particularly for developing countries. Irradiating food on a commercial scale has distinct advantages. Through irradiation, the keeping quality of a variety of food will be increased, insect infestation will be controlled, and dangerous intestinal pathogens will be eliminated. It will also facilitate export of food, which will aid national economic development, provide employment opportunities and foster the development of personnel trained in the technology. While food irradiation may be of importance and use in developing countries, it is equally important that developing countries are not used as 'testing grounds' for commercial food irradiation. By and large, public reluctance to accept food irradiation is deep-rooted. Fears need to be allayed through exposure to research results and extensive talks by experts and individuals from research institutions and the United Nations. If such attempts fail, it may be necessary for the government to embark on a program of introducing alternative food processes or technologies, e.g. food dehydration, fermentation, thermal or chemical treatments. In the eventual adoption of food irradiation, inspection of plants and manufacturing and distribution practices, monitoring of production lines, and testing of final product samples will be necessary

  15. Space Processing Applications Rocket project, SPAR 1. Final report

    Reeves, F.; Chassay, R.

    1976-12-01

    The experiment objectives, design/operational concepts, and final results of each of nine scientific experiments conducted during the first Space Processing Applications Rocket (SPAR) flight are summarized. The nine individual SPAR experiments, covering a wide and varied range of scientific materials processing objectives, were entitled: solidification of Pb-Sb eutectic, feasibility of producing closed-cell metal foams, characterization of rocket vibration environment by measurement of mixing of two liquids, uniform dispersions of crystallization processing, direct observation of solidification as a function of gravity levels, casting thoria dispersion-strengthened interfaces, contained polycrystalline solidification, and preparation of a special alloy for manufacturing of magnetic hard superconductor under zero-g environment

  16. Space Processing Applications rocket project SPAR III. Final report

    Reeves, F.

    1978-01-01

    This document presents the engineering report and science payload III test report and summarizes the experiment objectives, design/operational concepts, and final results of each of five scientific experiments conducted during the third Space Processing Applications Rocket (SPAR) flight flown by NASA in December 1976. The five individual SPAR experiments, covering a wide and varied range of scientific materials processing objectives, were entitled: Liquid Mixing, Interaction of Bubbles with Solidification Interfaces, Epitaxial Growth of Single Crystal Film, Containerless Processing of Beryllium, and Contact and Coalescence of Viscous Bodies

  17. Modern foraging: Presence of food and energy density influence motivational processing of food advertisements.

    Bailey, Rachel L

    2016-12-01

    More energy dense foods are preferable from an optimal foraging perspective, which suggests these foods are more motivationally relevant due to their greater capability of fulfilling biological imperatives. This increase in motivational relevance may be exacerbated in circumstances where foraging will be necessary. This study examined how food energy density and presence of food in the immediate environment interacted to influence motivational processing of food advertisements. N = 58 adults viewed advertisements for foods varying in energy density in contexts where the advertised food was actually present in the viewing room or not. Advertisements for more energy dense foods elicited greater skin conductivity level compared to ads for less energy dense foods when food was not present. All ads elicited decreases in corrugator supercilii activation indicating positive emotional response resultant from appetitive motivational activation, though the greatest activation was exhibited toward higher energy density foods when food was present. This supports an optimal foraging perspective and has implications for healthy eating interventions. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. Hippocampal leptin signaling reduces food intake and modulates food-related memory processing.

    Kanoski, Scott E; Hayes, Matthew R; Greenwald, Holly S; Fortin, Samantha M; Gianessi, Carol A; Gilbert, Jennifer R; Grill, Harvey J

    2011-08-01

    The increase in obesity prevalence highlights the need for a more comprehensive understanding of the neural systems controlling food intake; one that extends beyond food intake driven by metabolic need and considers that driven by higher-order cognitive factors. The hippocampus, a brain structure involved in learning and memory function, has recently been linked with food intake control. Here we examine whether administration of the adiposity hormone leptin to the dorsal and ventral sub-regions of the hippocampus influences food intake and memory for food. Leptin (0.1 μg) delivered bilaterally to the ventral hippocampus suppressed food intake and body weight measured 24 h after administration; a higher dose (0.4 μg) was needed to suppress intake following dorsal hippocampal delivery. Leptin administration to the ventral but not dorsal hippocampus blocked the expression of a conditioned place preference for food and increased the latency to run for food in an operant runway paradigm. Additionally, ventral but not dorsal hippocampal leptin delivery suppressed memory consolidation for the spatial location of food, whereas hippocampal leptin delivery had no effect on memory consolidation in a non-spatial appetitive response paradigm. Collectively these findings indicate that ventral hippocampal leptin signaling contributes to the inhibition of food-related memories elicited by contextual stimuli. To conclude, the results support a role for hippocampal leptin signaling in the control of food intake and food-related memory processing.

  19. High Throughput Multispectral Image Processing with Applications in Food Science.

    Panagiotis Tsakanikas

    Full Text Available Recently, machine vision is gaining attention in food science as well as in food industry concerning food quality assessment and monitoring. Into the framework of implementation of Process Analytical Technology (PAT in the food industry, image processing can be used not only in estimation and even prediction of food quality but also in detection of adulteration. Towards these applications on food science, we present here a novel methodology for automated image analysis of several kinds of food products e.g. meat, vanilla crème and table olives, so as to increase objectivity, data reproducibility, low cost information extraction and faster quality assessment, without human intervention. Image processing's outcome will be propagated to the downstream analysis. The developed multispectral image processing method is based on unsupervised machine learning approach (Gaussian Mixture Models and a novel unsupervised scheme of spectral band selection for segmentation process optimization. Through the evaluation we prove its efficiency and robustness against the currently available semi-manual software, showing that the developed method is a high throughput approach appropriate for massive data extraction from food samples.

  20. High Throughput Multispectral Image Processing with Applications in Food Science.

    Tsakanikas, Panagiotis; Pavlidis, Dimitris; Nychas, George-John

    2015-01-01

    Recently, machine vision is gaining attention in food science as well as in food industry concerning food quality assessment and monitoring. Into the framework of implementation of Process Analytical Technology (PAT) in the food industry, image processing can be used not only in estimation and even prediction of food quality but also in detection of adulteration. Towards these applications on food science, we present here a novel methodology for automated image analysis of several kinds of food products e.g. meat, vanilla crème and table olives, so as to increase objectivity, data reproducibility, low cost information extraction and faster quality assessment, without human intervention. Image processing's outcome will be propagated to the downstream analysis. The developed multispectral image processing method is based on unsupervised machine learning approach (Gaussian Mixture Models) and a novel unsupervised scheme of spectral band selection for segmentation process optimization. Through the evaluation we prove its efficiency and robustness against the currently available semi-manual software, showing that the developed method is a high throughput approach appropriate for massive data extraction from food samples.

  1. Radiation processing of food and agricultural commodities: opportunities and challenges

    Sharma, Arun

    2009-01-01

    Assuring adequate food security to citizens of the country requires deployment of strategies for augmenting agricultural production while eliminating post-harvest losses. Appropriate post-harvest processing, handling, storage and distribution practices are as important as the efforts to increase productivity for sustained food security, food safety and international trade in agricultural commodities. Nuclear energy can play a significant role both in the improvement of crop productivity, as well as, in the preservation and hygienization of agricultural produce

  2. Beyond nutrient-based food indices: a data mining approach to search for a quantitative holistic index reflecting the degree of food processing and including physicochemical properties.

    Fardet, Anthony; Lakhssassi, Sanaé; Briffaz, Aurélien

    2018-01-24

    Processing has major impacts on both the structure and composition of food and hence on nutritional value. In particular, high consumption of ultra-processed foods (UPFs) is associated with increased risks of obesity and diabetes. Unfortunately, existing food indices only focus on food nutritional content while failing to consider either food structure or the degree of processing. The objectives of this study were thus to link non-nutrient food characteristics (texture, water activity (a w ), glycemic and satiety potentials (FF), and shelf life) to the degree of processing; search for associations between these characteristics with nutritional composition; search for a holistic quantitative technological index; and determine quantitative rules for a food to be defined as UPF using data mining. Among the 280 most widely consumed foods by the elderly in France, 139 solid/semi-solid foods were selected for textural and a w measurements, and classified according to three degrees of processing. Our results showed that minimally-processed foods were less hyperglycemic, more satiating, had better nutrient profile, higher a w , shorter shelf life, lower maximum stress, and higher energy at break than UPFs. Based on 72 food variables, multivariate analyses differentiated foods according to their degree of processing. Then technological indices including food nutritional composition, a w , FF and textural parameters were tested against technological groups. Finally, a LIM score (nutrients to limit) ≥8 per 100 kcal and a number of ingredients/additives >4 are relevant, but not sufficient, rules to define UPFs. We therefore suggest that food health potential should be first defined by its degree of processing.

  3. Processing- and product-related causes for food waste and implications for the food supply chain.

    Raak, Norbert; Symmank, Claudia; Zahn, Susann; Aschemann-Witzel, Jessica; Rohm, Harald

    2017-03-01

    Reducing food waste is one of the prominent goals in the current research, which has also been set by the United Nations to achieve a more sustainable world by 2030. Given that previous studies mainly examined causes for food waste generation related to consumers, e.g., expectations regarding quality or uncertainties about edibility, this review aims at providing an overview on losses in the food industry, as well as on natural mechanisms by which impeccable food items are converted into an undesired state. For this, scientific literature was reviewed based on a keyword search, and information not covered was gathered by conducting expert interviews with representatives from 13 German food processing companies. From the available literature, three main areas of food waste generation were identified and discussed: product deterioration and spoilage during logistical operations, by-products from food processing, and consumer perception of quality and safety. In addition, expert interviews revealed causes for food waste in the processing sector, which were categorised as follows: losses resulting from processing operations and quality assurance, and products not fulfilling quality demands from trade. The interviewees explained a number of strategies to minimise food losses, starting with alternative tradeways for second choice items, and ending with emergency power supplies to compensate for power blackouts. It became clear that the concepts are not universally applicable for each company, but the overview provided in the present study may support researchers in finding appropriate solutions for individual cases. Copyright © 2016 Elsevier Ltd. All rights reserved.

  4. Processed and ultra-processed food products: consumption trends in Canada from 1938 to 2011.

    Moubarac, Jean-Claude; Batal, Malek; Martins, Ana Paula Bortoletto; Claro, Rafael; Levy, Renata Bertazzi; Cannon, Geoffrey; Monteiro, Carlos

    2014-01-01

    A classification of foods based on the nature, extent, and purpose of industrial food processing was used to assess changes in household food expenditures and dietary energy availability between 1938 and 2011 in Canada. Food acquisitions from six household food budget surveys (1938/1939 , 1953, 1969, 1984, 2001, and 2011) were classified into unprocessed or minimally processed foods, processed culinary ingredients, and ready-to-consume processed or ultra-processed products. Contributions of each group to household food expenditures, and to dietary energy availability (kcal per capita) were calculated. During the period studied, household expenditures and dietary energy availability fell for both unprocessed or minimally processed foods and culinary ingredients, and rose for ready-to-consume products. The caloric share of foods fell from 34.3% to 25.6% and from 37% to 12.7% for culinary ingredients. The share of ready-to-consume products rose from 28.7% to 61.7%, and the increase was especially noteworthy for those that were ultra-processed. The most important factor that has driven changes in Canadian dietary patterns between 1938 and 2011 is the replacement of unprocessed or minimally processed foods and culinary ingredients used in the preparation of dishes and meals; these have been displaced by ready-to-consume ultra-processed products. Nutrition research and practice should incorporate information about food processing into dietary assessments.

  5. Radio-Frequency Applications for Food Processing and Safety.

    Jiao, Yang; Tang, Juming; Wang, Yifen; Koral, Tony L

    2018-03-25

    Radio-frequency (RF) heating, as a thermal-processing technology, has been extending its applications in the food industry. Although RF has shown some unique advantages over conventional methods in industrial drying and frozen food thawing, more research is needed to make it applicable for food safety applications because of its complex heating mechanism. This review provides comprehensive information regarding RF-heating history, mechanism, fundamentals, and applications that have already been fully developed or are still under research. The application of mathematical modeling as a useful tool in RF food processing is also reviewed in detail. At the end of the review, we summarize the active research groups in the RF food thermal-processing field, and address the current problems that still need to be overcome.

  6. Video fluoroscopic techniques for the study of Oral Food Processing

    Matsuo, Koichiro; Palmer, Jeffrey B.

    2016-01-01

    Food oral processing and pharyngeal food passage cannot be observed directly from the outside of the body without instrumental methods. Videofluoroscopy (x-ray video recording) reveals the movement of oropharyngeal anatomical structures in two dimensions. By adding a radiopaque contrast medium, the motion and shape of the food bolus can be also visualized, providing critical information about the mechanisms of eating, drinking, and swallowing. For quantitative analysis of the kinematics of oral food processing, radiopaque markers are attached to the teeth, tongue or soft palate. This approach permits kinematic analysis with a variety of textures and consistencies, both solid and liquid. Fundamental mechanisms of food oral processing are clearly observed with videofluoroscopy in lateral and anteroposterior projections. PMID:27213138

  7. Current food classifications in epidemiological studies do not enable solid nutritional recommendations for preventing diet-related chronic diseases: the impact of food processing.

    Fardet, Anthony; Rock, Edmond; Bassama, Joseph; Bohuon, Philippe; Prabhasankar, Pichan; Monteiro, Carlos; Moubarac, Jean-Claude; Achir, Nawel

    2015-11-01

    To date, observational studies in nutrition have categorized foods into groups such as dairy, cereals, fruits, and vegetables. However, the strength of the association between food groups and chronic diseases is far from convincing. In most international expert surveys, risks are most commonly scored as probable, limited, or insufficient rather than convincing. In this position paper, we hypothesize that current food classifications based on botanical or animal origins can be improved to yield solid recommendations. We propose using a food classification that employs food processes to rank foods in epidemiological studies. Indeed, food health potential results from both nutrient density and food structure (i.e., the matrix effect), both of which can potentially be positively or negatively modified by processing. For example, cereal-based foods may be more or less refined, fractionated, and recombined with added salt, sugars, and fats, yielding a panoply of products with very different nutritional values. The same is true for other food groups. Finally, we propose that from a nutritional perspective, food processing will be an important issue to consider in the coming years, particularly in terms of strengthening the links between food and health and for proposing improved nutritional recommendations or actions. © 2015 American Society for Nutrition.

  8. Current Food Classifications in Epidemiological Studies Do Not Enable Solid Nutritional Recommendations for Preventing Diet-Related Chronic Diseases: The Impact of Food Processing12

    Fardet, Anthony; Rock, Edmond; Bassama, Joseph; Bohuon, Philippe; Prabhasankar, Pichan; Monteiro, Carlos; Moubarac, Jean-Claude; Achir, Nawel

    2015-01-01

    To date, observational studies in nutrition have categorized foods into groups such as dairy, cereals, fruits, and vegetables. However, the strength of the association between food groups and chronic diseases is far from convincing. In most international expert surveys, risks are most commonly scored as probable, limited, or insufficient rather than convincing. In this position paper, we hypothesize that current food classifications based on botanical or animal origins can be improved to yield solid recommendations. We propose using a food classification that employs food processes to rank foods in epidemiological studies. Indeed, food health potential results from both nutrient density and food structure (i.e., the matrix effect), both of which can potentially be positively or negatively modified by processing. For example, cereal-based foods may be more or less refined, fractionated, and recombined with added salt, sugars, and fats, yielding a panoply of products with very different nutritional values. The same is true for other food groups. Finally, we propose that from a nutritional perspective, food processing will be an important issue to consider in the coming years, particularly in terms of strengthening the links between food and health and for proposing improved nutritional recommendations or actions. PMID:26567188

  9. Modeling of processing technologies in food industry

    Korotkov, V. G.; Sagitov, R. F.; Popov, V. P.; Bachirov, V. D.; Akhmadieva, Z. R.; TSirkaeva, E. A.

    2018-03-01

    Currently, the society is facing an urgent need to solve the problems of nutrition (products with increased nutrition value) and to develop energy-saving technologies for food products. A mathematical modeling of heat and mass transfer of polymer materials in the extruder is rather successful these days. Mathematical description of movement and heat exchange during extrusion of gluten-protein-starch-containing material similar to pasta dough in its structure, were taken as a framework for the mathematical model presented in this paper.

  10. FOOD PROCESSING TECHNOLOGY, A SUGGESTED 2-YEAR POST HIGH SCHOOL CURRICULUM.

    KNOEBEL, ROBERT M.; AND OTHERS

    ADMINISTRATORS, ADVISORY COMMITTEES, SUPERVISORS, AND TEACHERS MAY USE THIS GUIDE IN PLANNING AND DEVELOPING NEW PROGRAMS OR EVALUATING EXISTING PROGRAMS IN POST-HIGH SCHOOL FOOD PROCESSING TECHNOLOGY. BASIC MATERIALS WERE PREPARED BY THE STATE UNIVERSITY OF NEW YORK AGRICULTURAL AND TECHNICAL COLLEGE AT MORRISVILLE AND FINAL PREPARATION WAS…

  11. Chapter 14. Radionuclides in vegetal production and food processing

    Toelgyessy, J.; Harangozo, M.

    2000-01-01

    This is a chapter of textbook of radioecology for university students. In this chapter authors deal with problems connected with using of radionuclides in vegetal production and food processing. Chapter consist of next parts: (1) Influence of radiation on foods; (2) Radiation sterilisation in health service

  12. Monitoring sodium in commercially processed foods from stores and restaurants

    Most of the sodium we eat comes from commercially processed foods from stores and restaurants. Sodium reduction in these foods is a key component of several recent public health efforts. Agricultural Research Service (ARS) of USDA, CDC and FDA have launched a collaborative program to monitor sodium ...

  13. Mitigation of Patulin in Fresh and Processed Foods and Beverages.

    Ioi, J David; Zhou, Ting; Tsao, Rong; F Marcone, Massimo

    2017-05-11

    Patulin is a mycotoxin of food safety concern. It is produced by numerous species of fungi growing on fruits and vegetables. Exposure to the toxin is connected to issues neurological, immunological, and gastrointestinal in nature. Regulatory agencies worldwide have established maximum allowable levels of 50 µg/kg in foods. Despite regulations, surveys continue to find patulin in commercial food and beverage products, in some cases, to exceed the maximum limits. Patulin content in food can be mitigated throughout the food processing chain. Proper handling, storage, and transportation of food can limit fungal growth and patulin production. Common processing techniques including pasteurisation, filtration, and fermentation all have an effect on patulin content in food but individually are not sufficient safety measures. Novel methods to remove or detoxify patulin have been reviewed. Non-thermal processing techniques such as high hydrostatic pressure, UV radiation, enzymatic degradation, binding to microorganisms, and chemical degradation all have potential but have not been optimised. Until further refinement of these methods, the hurdle approach to processing should be used where food safety is concerned. Future development should focus on determining the nature and safety of chemicals produced from the breakdown of patulin in treatment techniques.

  14. Organic Foods manufacturing and Processing: The New Way of Life

    Jalan, Vishal

    2007-01-01

    Organic is the fastest growing sector of the food industry with global sales approaching US $40 billion in 2006. Growing health-consciousness among consumers globally has resulted in high demand for Fresh and more importantly Processed Organic Food. This value-addition can generate large number of jobs in rural areas in India and Africa.

  15. Food systems transformations, ultra-processed food markets and the nutrition transition in Asia

    Baker, Phillip; Friel, Sharon

    2016-01-01

    Background Attracted by their high economic growth rates, young and growing populations, and increasingly open markets, transnational food and beverage corporations (TFBCs) are targeting Asian markets with vigour. Simultaneously the consumption of ultra-processed foods high in fat, salt and glycaemic load is increasing in the region. Evidence demonstrates that TFBCs can leverage their market power to shape food systems in ways that alter the availability, price, nutritional quality, desirabil...

  16. Review of conventional and novel food processing methods on food allergens.

    Vanga, Sai Kranthi; Singh, Ashutosh; Raghavan, Vijaya

    2017-07-03

    With the turn of this century, novel food processing techniques have become commercially very important because of their profound advantages over the traditional methods. These novel processing methods tend to preserve the characteristic properties of food including their organoleptic and nutritional qualities better when compared with the conventional food processing methods. During the same period of time, there is a clear rise in the populations suffering from food allergies, especially infants and children. Though, this fact is widely attributed to the changing livelihood of population in both developed and developing nations and to the introduction of new food habits with advent of novel foods and new processing techniques, their complete role is still uncertain. Under the circumstance, it is very important to understand the structural changes in the protein as food is processed to comprehend whether the specific processing technique (conventional and novel) is increasing or mitigating the allergenicity. Various modern means are now being employed to understand the conformational changes in the protein which can affect the allergenicity. In this review, the processing effects on protein structure and allergenicity are discussed along with the insinuations of recent studies and techniques for establishing a platform to investigate future pathway to reduce or eliminate allergenicity in the population.

  17. Enzymes- An Existing and Promising Tool of Food Processing Industry.

    Ray, Lalitagauri; Pramanik, Sunita; Bera, Debabrata

    2016-01-01

    The enzyme catalyzed process technology has enormous potential in the food sectors as indicated by the recent patents studies. It is very well realized that the adaptation of the enzyme catalyzed process depends on the availability of enzyme in affordable prices. Enzymes may be used in different food sectors like dairy, fruits & vegetable processing, meat tenderization, fish processing, brewery and wine making, starch processing and many other. Commercially only a small number of enzymes are used because of several factors including instability of enzymes during processing and high cost. More and more enzymes for food technology are now derived from specially selected or genetically modified microorganisms grown in industrial scale fermenters. Enzymes with microbial source have commercial advantages of using microbial fermentation rather than animal and plant extraction to produce food enzymes. At present only a relatively small number of enzymes are used commercially in food processing. But the number is increasing day by day and field of application will be expanded more and more in near future. The purpose of this review is to describe the practical applications of enzymes in the field of food processing.

  18. Hadronic final states and sum rules in deep inelastic processes

    Pal, B.K.

    1977-01-01

    In order to get maximum information on the hadronic final states and sum rules in deep inelastic processes, Regge phenomenology and quarks parton model have been used. The unified picture for the production of hadrons of type i as a function of Bjorken and Feyman variables with only one adjustable parameter is formulated. The results of neutrino experiments and the production of charm particles are discussed in sum rules. (author)

  19. Food nanotechnology: water is the key to lowering the energy density of processed foods.

    Robson, A A

    2011-01-01

    It is crucial that emergent technologies create foods that help prevent the causal mechanisms of the diet induced disease epidemic. Food nanotechnology could create modem convenience foods that mimic and improve on the nutritional value of the most nutritious cooked wild foods for humans. Structuring a solid processed food similar to a celery stalk using self-assembled, water-filled, edible nanocells or nanotubes would substantially lower its energy density (Food technologists could harness the natural turgor force to produce a firm chocolate bar, biscuit or breakfast cereal with a good bite, without altering the appearance or taste of the product. Water carries flavour with few calories, and taste sensation per mouthful could be improved by processing food on the nanoscale to increase the surface area that is in contact with taste and smell receptors. The bioavailable nutrient content (including cofactors) of processed foods could be increased by existing bioactive nanoencapsulation. This would allow people to continue to consume modern convenience food on a mass scale, while simultaneously and significantly increasing nutrient intake and reducing energy intake per day. Thus, helping to reduce mental ill health, obesity and other postprandial insults.

  20. Radiation processing of food: a promising technology to ensure food safety and security

    Gautam, S.

    2016-01-01

    Radiation processing of food involves controlled application of energy from ionizing radiations. Approved sources of radiation for food processing are radioisotopes (Cobalt-60 and Caesium-137), electron beam (up to 10 MeV) and X-rays (up to 5 MeV). Radiation processing of food is carried out in an irradiation chamber shielded by 1.5 - 1.8 m thick concrete walls. Food, either pre-packed or in-bulk, placed in suitable containers is sent into the irradiation chamber with the help of an automatic conveyor. Major benefits achieved by radiation processing of food are: (i) inhibition of sprouting of tubers and bulbs; (ii) disinfestations of insect pests in agricultural commodities; (iii) delay in ripening and senescence of fruits and vegetables; (iv) destruction of microbes responsible for spoilage, and (v) elimination of pathogens and parasites of public health importance. Irradiation produces very little chemical changes in food. The majority of changes are similar to those by other preservation methods like heat. The radiolytic products and free radicals produced are identical to those present in foods subjected to treatment such as cooking and canning. None of the changes known to occur have been found to be harmful. Twelve food irradiation plants have been commissioned till date in the private sector in India. Two plants set by Government of India (Radiation Processing Plant, Vashi, Navi Mumbai; and KRUSHAK, Lasalgaon, Nashik) are also operational. Volume of food irradiated in India has been steadily increasing. Recent development in the area of food irradiation in India include harmonization of food irradiation rules with international regulation

  1. Lost in processing? Perceived healthfulness, taste and caloric content of whole and processed organic food.

    Prada, Marília; Garrido, Margarida V; Rodrigues, David

    2017-07-01

    The "organic" claim explicitly informs consumers about the food production method. Yet, based on this claim, people often infer unrelated food attributes. The current research examined whether the perceived advantage of organic over conventional food generalizes across different organic food types. Compared to whole organic foods, processed organic foods are less available, familiar and prototypical of the organic food category. In two studies (combined N = 258) we investigated how both organic foods types were perceived in healthfulness, taste and caloric content when compared to their conventional alternatives. Participants evaluated images of both whole (e.g., lettuce) and processed organic food exemplars (e.g., pizza), and reported general evaluations of these food types. The association of these evaluations with individual difference variables - self-reported knowledge and consumption of organic food, and environmental concerns - was also examined. Results showed that organically produced whole foods were perceived as more healthful, tastier and less caloric than those produced conventionally, thus replicating the well-established halo effect of the organic claim in food evaluation. The organic advantage was more pronounced among individuals who reported being more knowledgeable about organic food, consumed it more frequently, and were more environmentally concerned. The advantage of the organic claim for processed foods was less clear. Overall, processed organic (vs. conventional) foods were perceived as tastier, more healthful (Study 1) or equally healthful (Study 2), but also as more caloric. We argue that the features of processed food may modulate the impact of the organic claim, and outline possible research directions to test this assumption. Uncovering the specific conditions in which food claims bias consumer's perceptions and behavior may have important implications for marketing, health and public-policy related fields. Copyright © 2017 Elsevier

  2. [Food processing industry--the salt shock to the consumers].

    Doko Jelinić, Jagoda; Nola, Iskra Alexandra; Andabaka, Damir

    2010-05-01

    Industrial food production and processing is necessarily connected with the use of salt. Salt or sodium chloride is used as a preservative, spice, agent for color maintenance, texture, and to regulate fermentation by stopping the growth of bacteria, yeast and mold. Besides kitchen salt, other types of salt that also contain sodium are used in various technological processes in food preparing industry. Most of the "hidden" salt, 70%-75%, can be brought to the body by using industrial food, which, unfortunately, has been increasingly used due to the modern way of life. Bread and bakery products, meat products, various sauces, dried fish, various types of cheese, fast food, conserved vegetables, ready-made soups and food additives are the most common industrial foods rich in sodium. Many actions have been taken all over the world to restrict salt consumption. The World Health Organization recommends the upper limit of salt input of 5 g per day. These actions appeal to food industry to reduce the proportion of salt in their products. Besides lower salt addition during manufacture, food industry can use salt substitutes, in particular potassium chloride (KCl), in combination with additives that can mask the absence of salt, and flavor intensifiers that also enhance the product salinity. However, food industry is still quite resistant to reducing salt in their products for fear from losing profits.

  3. Radiation decontamination of dry food ingredients and processing aids

    Farkas, J

    1984-01-01

    Radiation decontamination of dry ingredients, herbs and enzyme preparations is a technically feasible, economically viable and safe physical process. The procedure is direct, simple, requires no additives and is highly efficient. Its dose requirement is moderate. Radiation doses of 3-10 kGy (0.3-1 mrad) have proved sufficient to reduce the viable counts to a satisfactory level. Ionising radiations do not cause any significant rise in temperature. The flavour, texture or other important technological or sensory properties of most ingredients are not influenced at radiation doses necessary for satisfactory decontamination, and radiation obviates the chemical residue problem. The microflora surviving radiation decontamination of dry ingredients are more susceptible to subsequent antimicrobial treatments. Recontamination can be prevented as the product can be irradiated in its final packaging. Irradiation could be carried out in commercial containers and would result in considerable savings of energy and labour as compared to alternative decontamination techniques. Radiation processing of these commodities is an established technology in several countries and more clearances on irradiated foods are expected to be granted in the near future.

  4. Food safety through the training of 2-alcilciclobutanonas in processed foods by ionizing radiation

    Alves, Rodrigo Mendes

    2016-01-01

    Food irradiation is a means of preserving food which uses a processing technique that exposes the foods at a controlled high energy ionizing radiation. The treatment with the use of ionizing radiation in foods has many applications technologically and technically feasible, including the ability to improve the microbiological safety and reducing levels of pathogenic bacteria, inhibiting the germination of tubers plant application, preserving stored foods or the stability of storage and is also used to increase the shelf life of certain products due to the reduction of contamination by microorganisms. Due to the increase of international trade in food and the growing regulatory requirements of consumer markets increasingly importing and exporting countries have shown interest in food irradiation and conducted research in the practical application of this technology and detection methods of treatment. Numerous surveys were conducted worldwide, resulting in efficient protocols to identify which foods were irradiated or not. Until then, the 'myth' that irradiated food could not be detected and they were not formed any single radiation products has been replaced by the knowledge that many changes can occur in irradiated foods and these changes could be used as tools to identify this technology. The radiation processing resulting in characteristic patterns formations of saturated hydrocarbons, aldehydes, methyl and ethyl esters and 2-alcilciclobutanonas, depending on the fatty acid composition of the lipid that composes the food. Thus the purpose of this study was to collect data to compare the effects of different doses of gamma radiation and electron in foods that have fat to determine possible changes resulting from the use of irradiation, as the presence of 2-Alcilciclobutanonas and also show main equipment used for food irradiation and its categories, with the aim of informing the general public. (author)

  5. Enzyme technology for precision functional food ingredient processes

    Meyer, Anne S.

    2010-01-01

    modification of potato starch processing residues. Such targeted enzyme-catalyzed reactions provide new invention opportunities for designing functional foods with significant health benefits. The provision of well-defined naturally structured compounds can, moreover, assist in obtaining the much...

  6. Thermal food processing: new technologies and quality issues

    Sun, Da-Wen

    2012-01-01

    .... The editor of Thermal Food Processing: New Technologies and Quality Issues presents a comprehensive reference through authors that assist in meeting this challenge by explaining the latest developments and analyzing the latest trends...

  7. Effects of processing techniques on the radioactive contamination of food

    Bovard, P.; Delmas, J.; Grauby, A.

    Following contamination of cultures of rice, grapes and various vegetables by 90 Sr and 137 Cs, the effect of processing and cooking techniques on the contamination of the food-stuff was investigated [fr

  8. Corrosion Behaviour of Steels in Nigerian Food Processing ...

    Michael Horsfall

    quality regulatory agencies and food processing equipment fabricators. It is our desire that ... poisoning. ... corrosive effect under two special conditions; in solution with ..... Loto C.A and Atanda P.O (1998) Corrosion of Mild ... Health Paper. No.

  9. ADVANCED OXIDATION PROCESSES FOR FOOD INDUSTRIAL WASTEWATER DECONTAMINATION

    Dorota Krzemińska

    2015-02-01

    Full Text Available High organic matter content is a basic problem in food industry wastewaters. Typically, the amount and composition of the effluent varies considerably. In the article four groups of advanced processes and their combination of food industry wastewater treatment have been reviewed: electrochemical oxidation (EC, Fenton’s process, ozonation of water and photocatalytic processes. All advanced oxidation processes (AOP`s are characterized by a common chemical feature: the capability of exploiting high reactivity of HO• radicals in driving oxidation processes which are suitable for achieving decolonization and odour reduction, and the complete mineralization or increase of bioavailability of recalcitrant organic pollutants.

  10. The irradiation effects and processing dose for pet foods decontamination

    Zhu Jiating; Feng Min; Liu Chunquan; Zhao Yongfu; Jin Yudong; Ji Ping; Ha Yiming; Gao Meixu; Li Shurong; Wang Feng; Zhou Hongjie

    2009-01-01

    The applied dose range of irradiation processing of 4 kinds of pet foods had been studied. More than 92% microorganisms was inactive at the irradiation dose of 4 kGy, while more than 99% was inactive at 6 kGy. The microorganism load of irradiated pet food by 8 kGy met the requirement of national standards. The 10 kGy irradiation could sterilize the treated pet food. Salmonella had not been checked in irradiated or unirradiated samples. When irradiation dose ranged 4-10 kGy, there was no significant difference on contents of moisture, fat, protein, coarse fiber, carbohydrates, minerals (not including Calcium) or amino acids between irradiated and un-irradiated pet food. There was also no significant change on sensory quality of irradiated samples within this dose range. It is concluded that the recommended irradiation processing dose range for pet foods is 4-10 kGy. (authors)

  11. Neural Signaling of Food Healthiness Associated with Emotion Processing.

    Herwig, Uwe; Dhum, Matthias; Hittmeyer, Anna; Opialla, Sarah; Scherpiet, Sigrid; Keller, Carmen; Brühl, Annette B; Siegrist, Michael

    2016-01-01

    The ability to differentiate healthy from unhealthy foods is important in order to promote good health. Food, however, may have an emotional connotation, which could be inversely related to healthiness. The neurobiological background of differentiating healthy and unhealthy food and its relations to emotion processing are not yet well understood. We addressed the neural activations, particularly considering the single subject level, when one evaluates a food item to be of a higher, compared to a lower grade of healthiness with a particular view on emotion processing brain regions. Thirty-seven healthy subjects underwent functional magnetic resonance imaging while evaluating the healthiness of food presented as photographs with a subsequent rating on a visual analog scale. We compared individual evaluations of high and low healthiness of food items and also considered gender differences. We found increased activation when food was evaluated to be healthy in the left dorsolateral prefrontal cortex and precuneus in whole brain analyses. In ROI analyses, perceived and rated higher healthiness was associated with lower amygdala activity and higher ventral striatal and orbitofrontal cortex activity. Females exerted a higher activation in midbrain areas when rating food items as being healthy. Our results underline the close relationship between food and emotion processing, which makes sense considering evolutionary aspects. Actively evaluating and deciding whether food is healthy is accompanied by neural signaling associated with reward and self-relevance, which could promote salutary nutrition behavior. The involved brain regions may be amenable to mechanisms of emotion regulation in the context of psychotherapeutic regulation of food intake.

  12. Food consumption of children younger than 6 years according to the degree of food processing

    Ediana Volz Neitzke Karnopp

    Full Text Available Abstract: Objective: To evaluate food intake according to the degree of processing, stratified by family income and age, in a representative sample of children younger than 6 years in the city of Pelotas, RS, Brazil. Methods: Cross-sectional population-based study carried out with 770 children aged 0-72 months of age living in the urban area of Pelotas. The dietary intake of children was assessed by 24-h recall administered to mothers or guardians. The energy intake was estimated and each food item was classified according to the food processing degree. Food consumption was stratified by age (younger than 24 months; 24 months or older and associations between quintiles of family income and relative contribution of each food to total energy were performed by linear regression. The Wald test was applied to test linear trend across groups. Results: The mean energy intake was 1725.7 kcal/day. The mean contribution of processed and ultraprocessed foods was 19.7% among children younger than 24 months and 37% in those aged 24 months or older, while the mean consumption of natural and minimally processed food was 61% and 44%, respectively. Among children aged 24 months or older, a greater consumption of canned foods, cheese and sweets was observed as family income quintiles increased, while breads were more consumed by those children belonging to the lower income quintiles. Conclusion: A high caloric contribution of ultraprocessed foods in detriment to a lower consumption of natural and minimally processed foods was observed in the diet of children younger than 6 years.

  13. Using Power Ultrasound to Accelerate Food Freezing Processes: Effects on Freezing Efficiency and Food Microstructure.

    Zhang, Peizhi; Zhu, Zhiwei; Sun, Da-Wen

    2018-05-31

    Freezing is an effective way of food preservation. However, traditional freezing methods have the disadvantages of low freezing efficiency and generation of large ice crystals, leading to possible damage of food quality. Power ultrasound assisted freezing as a novel technique can effectively reduce the adverse effects during freezing process. This paper gives an overview on recent researches of power ultrasound technique to accelerate the food freezing processes and illustrates the main principles of power ultrasound assisted freezing. The effects of power ultrasound on liquid food, model solid food as well as fruit and vegetables are discussed, respectively, from the aspects of increasing freezing rate and improving microstructure. It is shown that ultrasound assisted freezing can effectively improve the freezing efficiency and promote the formation of small and evenly distributed ice crystals, resulting in better food quality. Different inherent properties of food samples affect the effectiveness of ultrasound application and optimum ultrasound parameters depend on the nature of the samples. The application of ultrasound to the food industry is more likely on certain types of food products and more efforts are still needed to realize the industrial translation of laboratory results.

  14. Food Production and Processing Considerations of Allergenic Food Ingredients: A Review

    Alvarez, Pedro A.; Boye, Joyce I.

    2012-01-01

    Although most consumers show no adverse symptoms to food allergens, health consequences for sensitized individuals can be very serious. As a result, the Codex General Standard for the Labelling of Prepackaged Foods has specified a series of allergenic ingredients/substances requiring mandatory declaration when present in processed prepackaged food products. Countries adhering to international standards are required to observe this minimum of eight substances, but additional priority allergens are included in the list in some countries. Enforcement agencies have traditionally focused their effort on surveillance of prepackaged goods, but there is a growing need to apply a bottom-up approach to allergen risk management in food manufacturing starting from primary food processing operations in order to minimize the possibility of allergen contamination in finished products. The present paper aims to review food production considerations that impact allergen risk management, and it is directed mainly to food manufacturers and policy makers. Furthermore, a series of food ingredients and the allergenic fractions identified from them, as well as the current methodology used for detection of these allergenic foods, is provided. PMID:22187573

  15. Impact of food processing and detoxification treatments on mycotoxin contamination.

    Karlovsky, Petr; Suman, Michele; Berthiller, Franz; De Meester, Johan; Eisenbrand, Gerhard; Perrin, Irène; Oswald, Isabelle P; Speijers, Gerrit; Chiodini, Alessandro; Recker, Tobias; Dussort, Pierre

    2016-11-01

    Mycotoxins are fungal metabolites commonly occurring in food, which pose a health risk to the consumer. Maximum levels for major mycotoxins allowed in food have been established worldwide. Good agricultural practices, plant disease management, and adequate storage conditions limit mycotoxin levels in the food chain yet do not eliminate mycotoxins completely. Food processing can further reduce mycotoxin levels by physical removal and decontamination by chemical or enzymatic transformation of mycotoxins into less toxic products. Physical removal of mycotoxins is very efficient: manual sorting of grains, nuts, and fruits by farmers as well as automatic sorting by the industry significantly lowers the mean mycotoxin content. Further processing such as milling, steeping, and extrusion can also reduce mycotoxin content. Mycotoxins can be detoxified chemically by reacting with food components and technical aids; these reactions are facilitated by high temperature and alkaline or acidic conditions. Detoxification of mycotoxins can also be achieved enzymatically. Some enzymes able to transform mycotoxins naturally occur in food commodities or are produced during fermentation but more efficient detoxification can be achieved by deliberate introduction of purified enzymes. We recommend integrating evaluation of processing technologies for their impact on mycotoxins into risk management. Processing steps proven to mitigate mycotoxin contamination should be used whenever necessary. Development of detoxification technologies for high-risk commodities should be a priority for research. While physical techniques currently offer the most efficient post-harvest reduction of mycotoxin content in food, biotechnology possesses the largest potential for future developments.

  16. Emerging Food Processing Technologies and Factors Impacting their Industrial Adoption.

    Priyadarshini, Anushree; Rajauria, Gaurav; O'Donnell, Colm P; Tiwari, Brijesh K

    2018-06-04

    Innovative food processing technologies have been widely investigated in food processing research in recent years. These technologies offer key advantages for advancing the preservation and quality of conventional foods, for combatting the growing challenges posed by globalization, increased competitive pressures and diverse consumer demands. However, there is a need to increase the level of adoption of novel technologies to ensure the potential benefits of these technologies are exploited more by the food industry. This review outlines emerging thermal and non-thermal food processing technologies with regard to their mechanisms, applications and commercial aspects. The level of adoption of novel food processing technologies by the food industry is outlined and the factors that impact their industrial adoption are discussed. At an industry level, the technological capabilities of individual companies, their size, market share as well as their absorptive capacity impact adoption of a novel technology. Characteristics of the technology itself such as costs involved in its development and commercialization, associated risks and relative advantage, its level of complexity and compatibility influence the technology's adoption. The review concludes that a deep understanding of the development and application of a technology along with the factors influencing its acceptance are critical for its commercial adoption.

  17. Polycyclic aromatic hydrocarbons' formation and occurrence in processed food.

    Singh, Lochan; Varshney, Jay G; Agarwal, Tripti

    2016-05-15

    Polycyclic aromatic hydrocarbons (PAHs) emerged as an important contaminant group in a gamut of processed food groups like dairy, nuts, herbs, beverages, meat products etc. Different cooking processes and processing techniques like roasting, barbecuing, grilling, smoking, heating, drying, baking, ohmic-infrared cooking etc. contribute towards its formation. The level of PAHs depends on factors like distance from heat source, fuel used, level of processing, cooking durations and methods, whereas processes like reuse, conching, concentration, crushing and storage enhance the amount of PAHs in some food items. This review paper provides insight into the impact of dietary intake of PAHs, its levels and formation mechanism in processed food items and possible interventions for prevention and reduction of the PAHs contamination. The gaps and future prospects have also been assessed. Copyright © 2015 Elsevier Ltd. All rights reserved.

  18. Recent trends in bioethanol production from food processing byproducts.

    Akbas, Meltem Yesilcimen; Stark, Benjamin C

    2016-11-01

    The widespread use of corn starch and sugarcane as sources of sugar for the production of ethanol via fermentation may negatively impact the use of farmland for production of food. Thus, alternative sources of fermentable sugars, particularly from lignocellulosic sources, have been extensively investigated. Another source of fermentable sugars with substantial potential for ethanol production is the waste from the food growing and processing industry. Reviewed here is the use of waste from potato processing, molasses from processing of sugar beets into sugar, whey from cheese production, byproducts of rice and coffee bean processing, and other food processing wastes as sugar sources for fermentation to ethanol. Specific topics discussed include the organisms used for fermentation, strategies, such as co-culturing and cell immobilization, used to improve the fermentation process, and the use of genetic engineering to improve the performance of ethanol producing fermenters.

  19. Food waste and food processing waste for biohydrogen production: a review.

    Yasin, Nazlina Haiza Mohd; Mumtaz, Tabassum; Hassan, Mohd Ali; Abd Rahman, Nor'Aini

    2013-11-30

    Food waste and food processing wastes which are abundant in nature and rich in carbon content can be attractive renewable substrates for sustainable biohydrogen production due to wide economic prospects in industries. Many studies utilizing common food wastes such as dining hall or restaurant waste and wastes generated from food processing industries have shown good percentages of hydrogen in gas composition, production yield and rate. The carbon composition in food waste also plays a crucial role in determining high biohydrogen yield. Physicochemical factors such as pre-treatment to seed culture, pH, temperature (mesophilic/thermophilic) and etc. are also important to ensure the dominance of hydrogen-producing bacteria in dark fermentation. This review demonstrates the potential of food waste and food processing waste for biohydrogen production and provides a brief overview of several physicochemical factors that affect biohydrogen production in dark fermentation. The economic viability of biohydrogen production from food waste is also discussed. Copyright © 2013 Elsevier Ltd. All rights reserved.

  20. Food advertising on Argentinean television: are ultra-processed foods in the lead?

    Allemandi, Lorena; Castronuovo, Luciana; Tiscornia, M Victoria; Ponce, Miguel; Schoj, Veronica

    2018-01-01

    To describe the number of processed and ultra-processed food (PUPF) advertisements (ads) targeted to children on Argentinean television (TV), to analyse the advertising techniques used and the nutritional quality of the foods advertised, and to determine the potential exposure of children to unhealthy food advertising in our country. Five free-to-air channels and the three most popular children's cable networks were recorded from 07.00 to 22.00 hours for 6 weeks. Ads were classified by target audience, type of product, advertised food categories and advertising strategies used. The NOVA system was used to classify food products according to industrial food processing level. Nutritional quality was analysed using the Pan American Health Organization's nutrient profile model. Buenos Aires, Argentina. Results are considered applicable to most of the country. The study did not involve human subjects. Of the sample of food ads, PUPF products were more frequently advertised during children's programmes (98·9 %) v. programmes targeted to the general audience (93·7 %, χ 2=45·92, Ptargeting children. Argentinean children are estimated to be exposed to sixty-one ads for unhealthy PUPF products per week. Our study showed that Argentinean children are exposed to a high number of unhealthy PUPF ads on TV. The Argentinean Government should build on this information to design and implement a comprehensive policy to reduce exposure to unhealthy food marketing that includes TV and other communication channels and places.

  1. Modern processing technologies and food quality. 18th Food Technology Days '97 dedicated to prof. F. Bitenc

    Zlender, Bozidar; Gasperlin, Lea; Hocevar, Ivica; Slemenik, Barbka; Hocevar, Polona

    1997-01-01

    Modern processing technologies and food quality. Proceedings of thematic survey of topics in food science and technology and nutrition for postgraduate students, Ljubljana Univ. (Slovenia). Biotechnical Fac., Food Science and Technology Dept

  2. Integration of Product, Package, Process, and Environment: A Food System Optimization

    Cooper, Maya R.; Douglas, Grace L.

    2015-01-01

    The food systems slated for future NASA missions must meet crew nutritional needs, be acceptable for consumption, and use resources efficiently. Although the current food system of prepackaged, moderately stabilized food items works well for International Space Station (ISS) missions, many of the current space menu items do not maintain acceptability and/or nutritive value beyond 2 years. Longer space missions require that the food system can sustain the crew for 3 to 5 years without replenishment. The task "Integration of Product, Package, Process, and Environment: A Food System Optimization" has the objective of optimizing food-product shelf life for the space-food system through product recipe adjustments, new packaging and processing technologies, and modified storage conditions. Two emergent food processing technologies were examined to identify a pathway to stable, wet-pack foods without the detrimental color and texture effects. Both microwave-assisted thermal sterilization (MATS) and pressure-assisted thermal stabilization (PATS) were evaluated against traditional retort processing to determine if lower heat inputs during processing would produce a product with higher micronutrient quality and longer shelf life. While MATS products did have brighter color and better texture initially, the advantages were not sustained. The non-metallized packaging film used in the process likely provided inadequate oxygen barrier. No difference in vitamin stability was evident between MATS and retort processed foods. Similarly, fruit products produced using PATS showed improved color and texture through 3 years of storage compared to retort fruit, but the vitamin stability was not improved. The final processing study involved freeze drying. Five processing factors were tested in factorial design to assess potential impact of each to the quality of freeze-dried food, including the integrity of the microstructure. The initial freezing rate and primary freeze drying

  3. Dosimetry. Standard practice for dosimetry in gamma irradiation facilities for food and non-food processing

    2008-01-01

    This Ghana Standard outlines the installation qualification program for an irradiator and the dosimetry procedures to be followed during operational qualification, performance qualification and routine processing in facilities that process food and non-food with gamma rays. This is to ensure that the product has been treated with predetermined range of absorbed dose. It is not intended for use in X-ray and electron beam facilities and therefore dosimetry systems in such facilities are not covered

  4. Salt processed food and gastric cancer in a Chinese population.

    Lin, Si-Hao; Li, Yuan-Hang; Leung, Kayee; Huang, Cheng-Yu; Wang, Xiao-Rong

    2014-01-01

    To investigate the association between salt processed food and gastric cancer, a hospital based case-control study was conducted in a high risk area of China. One hundred and seven newly diagnosed cases with histological confirmation of gastric cancer and 209 controls were recruited. Information on dietary intake was collected with a validated food frequency questionnaire. Unconditional logistic regression was applied to estimate the odds ratios with adjustment for other potential confounders. Comparing the high intake group with never consumption of salt processed foods, salted meat, pickled vegetables and preserved vegetables were significantly associated with increased risk of gastric cancer. Meanwhile, salt taste preference in diet showed a dose-response relationship with gastric cancer. Our results suggest that consumption of salted meat, pickled and preserved vegetables, are positively associated with gastric cancer. Reduction of salt and salt processed food in diets might be one practical measure to preventing gastric cancer.

  5. Agriculture and Food Processes Branch program summary document

    None

    1980-06-01

    The work of the Agriculture and Food Processes Branch within the US DOE's Office of Industrial Programs is discussed and reviewed. The Branch is responsible for assisting the food and agricultural sectors of the economy in increasing their energy efficiency by cost sharing with industry the development and demonstration of technologies industry by itself would not develop because of a greater than normal risk factor, but have significant energy conservation benefits. This task is made more difficult by the diversity of agriculture and the food industry. The focus of the program is now on the development and demonstration of energy conservation technology in high energy use industry sectors and agricultural functions (e.g., sugar processing, meat processing, irrigation, and crop drying, high energy use functions common to many sectors of the food industry (e.g., refrigeration, drying, and evaporation), and innovative concepts (e.g., energy integrated farm systems. Specific projects within the program are summarized. (LCL)

  6. Solar energy in food processing-a critical appraisal.

    Eswara, Amruta R; Ramakrishnarao, M

    2013-04-01

    Increasing population and high cost of fuels have created opportunities for using alternate energies for post-harvest processing of foods. Solar food processing is an emerging technology that provides good quality foods at low or no additional fuel costs. A number of solar dryers, collectors and concentrators are currently being used for various steps in food processing and value addition. Society for Energy, Environment and Development (SEED) developed Solar Cabinet Dryer with forced circulation which has been used for dehydration and development of value added products from locally grown fruits, vegetables, leafy greens and forest produce. Drying under simulated shade conditions using UV-reducing Blue filter helps retain nutrients better. Its simple design and ease of handling makes SEED Solar Dryer an ideal choice for application of food processing in rural settings, closer to where the harvest is produced, eliminating the need for expensive transportation or storage of fresh produce. It also creates employment opportunities among the rural population, especially women. Other gadgets based on solar collectors and concentrators currently being used at various steps of food processing are reviewed.

  7. Age at introduction of ultra-processed food among preschool children attending day-care centers.

    Longo-Silva, Giovana; Silveira, Jonas Augusto C; Menezes, Rísia Cristina Egito de; Toloni, Maysa Helena de Aguiar

    To identify the age of introduction of ultra-processed food and its associated factors among preschool children. Cross-sectional study carried out from March to June 2014 with 359 preschool children aged 17 to 63 months attending day-care centers. Time until ultra-processed food introduction (outcome variable) was described by the Kaplan-Meier analysis, and the log-rank test was used to compare the survival functions of independent variables. Factors associated with ultra-processed food introduction were investigated using the multivariate Cox proportional hazards model. The results were shown as hazard ratios with their respective 95% confidence intervals. The median time until ultra-processed food introduction was six months. Between the 3rd and 6th months, there is a significant increase in the probability of introducing ultra-processed food in the children's diet; and while the probability in the 3rd month varies from 0.15 to 0.25, at six months the variation ranges from 0.6 to 1.0. The final Cox proportional hazards model showed that unplanned pregnancy (1.32 [1.05-1.65]), absence of prenatal care (2.50 [1.02-6.16]), and income >2 minimum wages (1, 50 [1.09-2.06]) were independent risk factors for the introduction of ultra-processed food. Up to the 6th month of life, approximately 75% of preschool children had received one or more ultra-processed food in their diet. In addition, it was observed that the poorest families, as well as unfavorable prenatal factors, were associated with early introduction of ultra-processed food. Copyright © 2017. Published by Elsevier Editora Ltda.

  8. Analyzing scheduling in the food-processing industry

    Akkerman, Renzo; van Donk, Dirk Pieter

    2009-01-01

    Production scheduling has been widely studied in several research areas, resulting in a large number of methods, prescriptions, and approaches. However, the impact on scheduling practice seems relatively low. This is also the case in the food-processing industry, where industry......-specific characteristics induce specific and complex scheduling problems. Based on ideas about decomposition of the scheduling task and the production process, we develop an analysis methodology for scheduling problems in food processing. This combines an analysis of structural (technological) elements of the production...... process with an analysis of the tasks of the scheduler. This helps to understand, describe, and structure scheduling problems in food processing, and forms a basis for improving scheduling and applying methods developed in literature. It also helps in evaluating the organisational structures...

  9. Food systems transformations, ultra-processed food markets and the nutrition transition in Asia.

    Baker, Phillip; Friel, Sharon

    2016-12-03

    Attracted by their high economic growth rates, young and growing populations, and increasingly open markets, transnational food and beverage corporations (TFBCs) are targeting Asian markets with vigour. Simultaneously the consumption of ultra-processed foods high in fat, salt and glycaemic load is increasing in the region. Evidence demonstrates that TFBCs can leverage their market power to shape food systems in ways that alter the availability, price, nutritional quality, desirability and ultimately consumption of such foods. This paper describes recent changes in Asian food systems driven by TFBCs in the retail, manufacturing and food service sectors and considers the implications for population nutrition. Market data for each sector was sourced from Euromonitor International for four lower-middle income, three upper-middle income and five high-income Asian countries. Descriptive statistics were used to describe trends in ultra-processed food consumption (2000-2013), packaged food retail distribution channels (1999-2013), 'market transnationalization' defined as the market share held by TFBCs relative to domestic firms (2004-2013), and 'market concentration' defined as the market share and thus market power held by the four leading firms (2004-2013) in each market. Ultra-processed food sales has increased rapidly in most middle-income countries. Carbonated soft drinks was the leading product category, in which Coca-Cola and PepsiCo had a regional oligopoly. Supermarkets, hypermarkets and convenience stores were becoming increasingly dominant as distribution channels for packaged foods throughout the region. Market concentration was increasing in the grocery retail sector in all countries. Food service sales are increasing in all countries led by McDonalds and Yum! Brands. However, in all three sectors TFBCs face strong competition from Asian firms. Overall, the findings suggest that market forces are likely to be significant but variable drivers of Asia

  10. Contribution of food additives to sodium and phosphorus content of diets rich in processed foods.

    Carrigan, Anna; Klinger, Andrew; Choquette, Suzanne S; Luzuriaga-McPherson, Alexandra; Bell, Emmy K; Darnell, Betty; Gutiérrez, Orlando M

    2014-01-01

    Phosphorus-based food additives increase the total phosphorus content of processed foods. However, the extent to which these additives augment total phosphorus intake per day is unclear. To examine the contribution of phosphorus-based food additives to the total phosphorus content of processed foods, separate 4-day menus for a low-additive and additive-enhanced diet were developed using Nutrition Data System for Research (NDSR) software. The low-additive diet was designed to conform to U.S. Department of Agriculture guidelines for energy and phosphorus intake (∼2,000 kcal/day and 900 mg of phosphorus per day), and it contained minimally processed foods. The additive-enhanced diet contained the same food items as the low-additive diet except that highly processed foods were substituted for minimally processed foods. Food items from both diets were collected, blended, and sent for measurement of energy and nutrient intake. The low-additive and additive-enhanced diet provided approximately 2,200 kcal, 700 mg of calcium, and 3,000 mg of potassium per day on average. Measured sodium and phosphorus content standardized per 100 mg of food was higher each day of the additive-enhanced diet as compared with the low-additive diet. When averaged over the 4 menu days, the measured phosphorus and sodium contents of the additive-enhanced diet were 606 ± 125 and 1,329 ± 642 mg higher than the low-additive diet, respectively, representing a 60% increase in total phosphorus and sodium content on average. When comparing the measured values of the additive-enhanced diet to NDSR-estimated values, there were no statistically significant differences in measured versus estimated phosphorus contents. Phosphorus and sodium additives in processed foods can substantially augment phosphorus and sodium intake, even in relatively healthy diets. Current dietary software may provide reasonable estimates of the phosphorus content in processed foods. Copyright © 2014 National Kidney

  11. Food processing as a means for pesticide residue dissipation

    Đorđević Tijana

    2016-01-01

    Full Text Available Pesticides are one of the major inputs used for increasing agricultural productivity of crops. However, their inadequate application may produce large quantities of residues in the environment and, once the environment is contaminated with pesticides, they may easily enter into the human food chain through plants, creating a potentially serious health hazard. Nowadays, consumers are becoming more aware of the importance of safe and high quality food products. Thus it is pertinent to explore simple, cost-effective strategies for decontaminating food from pesticides. Various food processing techniques, at industrial and/or domestical level, have been found to significantly reduce the contents of pesticide residues in most food materials. The extent of reduction varies with the nature of pesticides, type of commodity and processing steps. Pesticides, especially those with limited movement and penetration ability, can be removed with reasonable efficiency by washing, and the effectiveness of washing depends on pesticide solubility in water or in different chemical solvents. Peeling of fruit and vegetable skin can dislodge pesticide residues to varying degrees, depending on constitution of a commodity, chemical nature of the pesticide and environmental conditions. Different heat treatments (drying, pasteurization, sterilization, blanching, steaming, boiling, cooking, frying or roasting during various food preparation and preservation processes can cause losses of pesticide residues through evaporation, co-distillation and/or thermal degradation. Product manufactures, from the simplest grain milling, through oil extraction and processing, juicing/pureeing or canning of fruits and vegetables, to complex bakery and dairy production, malting and brewing, wine making and various fermentation processes, play a role in the reduction of pesticide contents, whereby each operation involved during processing usually adds to a cumulative effect of reduction of

  12. Packaging materials for use in radiation processing of foods

    Dragusin, M.; Rotaru, P.R.

    1999-01-01

    In radiation processing of food, the product often has to be prepackaged to prevent microbial recontamination during and after irradiation. The packaging material is exposed to radiation during radiation processing and radiation stability is a key consideration in the selection of packaging materials. The effects of ionizing radiation on many food packaging materials at the dose levels recommended for food precessing can be minimized by selecting appropriate radiation resistant materials. It is important to select materials in which chemicals formed as a result of the radiation treatment do not migrate and interact with the food, affecting its organoleptic and toxicological aspects. It is also important to select materials in which the physical properties are not altered to the extent they cannot resist damage during commercial production, shipment and storage. Radiation treatment of food may be classified broadly into two categories: 1. Processes requiring doses less than 10 kGy; 2. Processes requiring doses from 25 to 40 kGy for production of commercial sterility. In radiation processing of foods, gamma radiation from radioisotopes Co-60 and Cs-137 is most widely used because of its high penetrating power. Electron beam irradiation (E<10 MeV) and X-rays (E<5 MeV) can also be used for certain speciality food and packaging to the food. Because the public acceptance of irradiated foods is a major problem in marketing such products, we have developed in our laboratory an alternative techniques. These techniques are based on applying films on the surfaces of foods. The films are edible, i.e. they are an aqueous solution based on caseine, glycerine, poly-etilene-glycol (PEG), crosslinked by radiation processing. So, our techniques implies no longer the food irradiation but instead its isolation from the environmental biological attacks by means of edible films obtained by irradiation. The protective properties of films, as special humidity, oxygen and fat barriers, are

  13. Stress hormones link food availability and population processes in seabirds

    Kitaysky, A.S.; Piatt, John F.; Wingfield, J.C.

    2007-01-01

    Catastrophic population declines in marine top predators in the northern Pacific have been hypothesized to result from nutritional stress affecting reproduction and survival of individuals. However, empirical evidence for food-related stress in wild animals is frequently lacking or inconclusive. We used a field endocrinology approach to measure stress, identify its causes, and examine a link between stress and population processes in the common murre Uria aalge. We tested the empirical relationship between variations in the stress hormone corticosterone (CORT) and food abundance, reproduction, and persistence of individuals at declining and increasing colonies in Cook Inlet, Alaska, from 1996 to 2001. We found that CORT secretion in murres is independent of colony, reproductive stage effects, and gender of individuals, but is directly negatively correlated with abundance of their food. Baseline CORT reflected current food abundance, whereas acute stress-induced CORT reflected food abundance in the previous month. As food supply diminished, increased CORT secretion predicted a decrease in reproductive performance. At a declining colony, increased baseline levels of CORT during reproduction predicted disappearance of individuals from the population. Persistence of individuals in a growing colony was independent of CORT during reproduction. The obtained results support the hypothesis that nutritional stress during reproduction affects reproduction and survival in seabirds. This study provides the first unequivocal evidence for CORT secretion as a mechanistic link between fluctuations in food abundance and population processes in seabirds. ?? Inter-Research 2007.

  14. Food processing: The use of non-fouling food grade heat transfer fluids

    Wright, Christopher Ian; Bembridge, Thomas; Picot, Eole; Premel, Julien

    2015-01-01

    It is reported that there are some 4000 companies operating high temperature thermal fluid systems in the UK and Ireland. This excludes steam or water based systems. The heat transfer fluids (HTFs) used in food processing are highly refined mineral HTFs that are non-toxic, non-irritating and lack an odour. If an HTF has been certified for use in food processing it carries an HT-1 certificate. HTFs suitable for use in food processing are commonly referred to as ‘non-fouling’ which means as they thermally degrade they produce small carbon particles that are suspended in the HTF. Moreover, the carbon formations are less sticky and this reduces the extent of adhesion to the internal surfaces of an HTF system. The current paper analysed the test reports from 1223 HTF systems and showed that, on average, the carbon residue for food grade HTF was lower than non-food grade HTF. This clearly demonstrates what the non-fouling nature of a food grade HTF. This paper then explored the regulatory, legal and environmental landscape for food grade HTFs. In this area of manufacturing, it is critical that the HTFs used are suitable for incidental contact with food. Other measures put consumer safety at the heart of all operations (i.e., internal company procedures such as hazard analysis and critical control points [HACCP]) and that food is safe for consumer consumption (e.g., external controls such as auditing manufacturers to ensure good quality and distribution practice). The authors introduce the idea that safety could be further enhanced through independent HTF sampling and chemical analysis of HTFs to ensure they are food grade and should be done without any interruption to a manufacturer's production. - Highlights: • Food grade heat transfer fluid (HTF) is colourless, non-toxic and non-irritating. • This HTF is non-fouling and less carbon forms. • Such HTFs can be safely used in food processing if they are HT-1 certified. • A number of controls (e.g., HACCP

  15. Quality assessment of baby food made of different pre-processed organic raw materials under industrial processing conditions.

    Seidel, Kathrin; Kahl, Johannes; Paoletti, Flavio; Birlouez, Ines; Busscher, Nicolaas; Kretzschmar, Ursula; Särkkä-Tirkkonen, Marjo; Seljåsen, Randi; Sinesio, Fiorella; Torp, Torfinn; Baiamonte, Irene

    2015-02-01

    The market for processed food is rapidly growing. The industry needs methods for "processing with care" leading to high quality products in order to meet consumers' expectations. Processing influences the quality of the finished product through various factors. In carrot baby food, these are the raw material, the pre-processing and storage treatments as well as the processing conditions. In this study, a quality assessment was performed on baby food made from different pre-processed raw materials. The experiments were carried out under industrial conditions using fresh, frozen and stored organic carrots as raw material. Statistically significant differences were found for sensory attributes among the three autoclaved puree samples (e.g. overall odour F = 90.72, p processed from frozen carrots show increased moisture content and decrease of several chemical constituents. Biocrystallization identified changes between replications of the cooking. Pre-treatment of raw material has a significant influence on the final quality of the baby food.

  16. Dynamics of process at the final stage of nuclear fission

    Koljari, I.G.; Mavlitov, N.D.

    2005-01-01

    Numerous experimental data show, that the final stage of nuclear fission near to a scission point plays an essential role at formation of characteristics of fission products. At the description of a final stage of fission there is a number of problems: Definition of the form of the nuclear near the scission point and definition forms of a fission fragments; The account of dynamic processes in compound nuclear directly before of fission. The condition of the quasistatic al adiabatic process - dS/dt=0 - is applied in a point of transition from the uniform compound nuclei to several forms for definition of generalized coordinates and speeds. Calculation of dependence of post neutrons from nuclear mass of fission fragments for reactions is α+ 83 Bi 209 → 85 At 213 (E lab = 45 MeV); α+ 92 U 242 → 94 Pu 242 (E lab = 45 MeV); 8 O 18 + 79 Au 197 → 97 Fr 215 (E lab = 159 MeV). System of equations, which describes behaviour of system in a point of nuclear fission-transition from the uniform form to system of a two (and, probably more) fission fragments is given. The system of the equations allows in a fission point to define the generalized coordinates, and the generalized speeds for each of the generalized coordinates of collective deformation variables

  17. Kombucha brewing under the Food and Drug Administration model Food Code: risk analysis and processing guidance.

    Nummer, Brian A

    2013-11-01

    Kombucha is a fermented beverage made from brewed tea and sugar. The taste is slightly sweet and acidic and it may have residual carbon dioxide. Kombucha is consumed in many countries as a health beverage and it is gaining in popularity in the U.S. Consequently, many retailers and food service operators are seeking to brew this beverage on site. As a fermented beverage, kombucha would be categorized in the Food and Drug Administration model Food Code as a specialized process and would require a variance with submission of a food safety plan. This special report was created to assist both operators and regulators in preparing or reviewing a kombucha food safety plan.

  18. Recontamination as a source of pathogens in processed foods

    Reij, M.W.; Asselt-den Aantrekker, van E.D.

    2004-01-01

    Food products that have been submitted to an adequate heat-treatment during processing are free of vegetative pathogens and, depending on the treatments, of sporeformers and are generally regarded as safe. Processed products such as pate, ice cream, infant formulae and others have nevertheless been

  19. Quantification of microbial quality and safety in minimally processed foods

    Zwietering, M.H.

    2002-01-01

    To find a good equilibrium between quality and margin of safety of minimally processed foods, often various hurdles are used. Quantification of the kinetics should be used to approach an optimum processing and to select the main aspects. Due to many factors of which the exact quantitative effect is

  20. Recent Advances in Food Processing Using High Hydrostatic Pressure Technology.

    Wang, Chung-Yi; Huang, Hsiao-Wen; Hsu, Chiao-Ping; Yang, Binghuei Barry

    2016-01-01

    High hydrostatic pressure is an emerging non-thermal technology that can achieve the same standards of food safety as those of heat pasteurization and meet consumer requirements for fresher tasting, minimally processed foods. Applying high-pressure processing can inactivate pathogenic and spoilage microorganisms and enzymes, as well as modify structures with little or no effects on the nutritional and sensory quality of foods. The U.S. Food and Drug Administration (FDA) and the U.S. Department of Agriculture (USDA) have approved the use of high-pressure processing (HPP), which is a reliable technological alternative to conventional heat pasteurization in food-processing procedures. This paper presents the current applications of HPP in processing fruits, vegetables, meats, seafood, dairy, and egg products; such applications include the combination of pressure and biopreservation to generate specific characteristics in certain products. In addition, this paper describes recent findings on the microbiological, chemical, and molecular aspects of HPP technology used in commercial and research applications.

  1. Processed foods and the nutrition transition: evidence from Asia.

    Baker, P; Friel, S

    2014-07-01

    This paper elucidates the role of processed foods and beverages in the 'nutrition transition' underway in Asia. Processed foods tend to be high in nutrients associated with obesity and diet-related non-communicable diseases: refined sugar, salt, saturated and trans-fats. This paper identifies the most significant 'product vectors' for these nutrients and describes changes in their consumption in a selection of Asian countries. Sugar, salt and fat consumption from processed foods has plateaued in high-income countries, but has rapidly increased in the lower-middle and upper-middle-income countries. Relative to sugar and salt, fat consumption in the upper-middle- and lower-middle-income countries is converging most rapidly with that of high-income countries. Carbonated soft drinks, baked goods, and oils and fats are the most significant vectors for sugar, salt and fat respectively. At the regional level there appears to be convergence in consumption patterns of processed foods, but country-level divergences including high levels of consumption of oils and fats in Malaysia, and soft drinks in the Philippines and Thailand. This analysis suggests that more action is needed by policy-makers to prevent or mitigate processed food consumption. Comprehensive policy and regulatory approaches are most likely to be effective in achieving these goals. © 2014 The Authors. obesity reviews © 2014 World Obesity.

  2. Process-induced formation of imidazoles in selected foods.

    Mottier, Pascal; Mujahid, Claudia; Tarres, Adrienne; Bessaire, Thomas; Stadler, Richard H

    2017-08-01

    The presence of 4-methylimidazole (4-MEI), 2-methylimidazole (2-MEI) and 2-acetyl-4-tetrahydroxybutylimidazole (THI) in some foods may result from the usage of caramel colorants E150c and E150d as food additives. This study demonstrates that alkylimidazoles are also byproducts formed from natural constituents in foods during thermal processes. A range of heat-processed foods that are known not to contain caramel colorants were analyzed by isotope dilution LC-MS/MS to determine the contamination levels. Highest 4-MEI concentrations (up to 466µg/kg) were observed in roasted barley, roasted malt and cocoa powders, with the concomitant presence of 2-MEI and/or THI in some cases, albeit at significantly lower levels. Low amounts of 4-MEI (foods such as breakfast cereals and bread toasted to a brown color (medium toasted). The occurrence of 4-MEI in certain processed foods is therefore not a reliable indicator of the presence of the additives E150c or E150d. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Bioregenerative Life Support Systems Test Complex (Bio-Plex) Food Processing System: A Dual System

    Perchonok, Michele; Vittadini, Elena; Peterson, Laurie J.; Swango, Beverly E.; Toerne, Mary E.; Russo, Dane M. (Technical Monitor)

    2001-01-01

    A Bioregenerative Life Support Test Complex, BIO-Plex, is currently being constructed at the Johnson Space Center (JSC) in Houston, TX. This facility will attempt to answer the questions involved in developing a lunar or planetary base. The Food Processing System (FPS) of the BIO-Plex is responsible for supplying food to the crew in coordination with the chosen mission scenario. Long duration space missions require development of both a Transit Food System and of a Lunar or Planetary Food System. These two systems are intrinsically different since the first one will be utilized in the transit vehicle in microgravity conditions with mostly resupplied foods, while the second will be used in conditions of partial gravity (hypogravity) to process foods from crops grown in the facility. The Transit Food System will consist of prepackaged food of extended shelf life. It will be supplemented with salad crops that will be consumed fresh. Microgravity imposes significant limitation on the ability to handle food and allows only for minimal processing. The challenge is to develop food systems similar to the International Space Station or Shuttle Food Systems but with a shelf life of 3 - 5 years. The Lunar or Planetary Food System will allow for food processing of crops due to the presence of some gravitational force (1/6 to 1/3 that of Earth). Crops such as wheat, soybean, rice, potato, peanut, and salad crops, will be processed to final products to provide a nutritious and acceptable diet for the crew. Not only are constraints imposed on the FPS from the crops (e.g., crop variation, availability, storage and shelf-life) but also significant requirements are present for the crew meals (e.g., RDA, high quality, safety, variety). The FPS becomes a fulcrum creating the right connection from crops to crew meals while dealing with issues of integration within a closed self-regenerative system (e.g., safe processing, waste production, volumes, air contaminations, water usage, etc

  4. Quantification of DNA fragmentation in processed foods using real-time PCR.

    Mano, Junichi; Nishitsuji, Yasuyuki; Kikuchi, Yosuke; Fukudome, Shin-Ichi; Hayashida, Takuya; Kawakami, Hiroyuki; Kurimoto, Youichi; Noguchi, Akio; Kondo, Kazunari; Teshima, Reiko; Takabatake, Reona; Kitta, Kazumi

    2017-07-01

    DNA analysis of processed foods is performed widely to detect various targets, such as genetically modified organisms (GMOs). Food processing often causes DNA fragmentation, which consequently affects the results of PCR analysis. In order to assess the effects of DNA fragmentation on the reliability of PCR analysis, we investigated a novel methodology to quantify the degree of DNA fragmentation. We designed four real-time PCR assays that amplified 18S ribosomal RNA gene sequences common to various plants at lengths of approximately 100, 200, 400, and 800 base pairs (bp). Then, we created an indicator value, "DNA fragmentation index (DFI)", which is calculated from the Cq values derived from the real-time PCR assays. Finally, we demonstrated the efficacy of this method for the quality control of GMO detection in processed foods by evaluating the relationship between the DFI and the limit of detection. Copyright © 2017 Elsevier Ltd. All rights reserved.

  5. Food Processing: The Influence of the Maillard Reaction on Immunogenicity and Allergenicity of Food Proteins

    Teodorowicz, Malgorzata; van Neerven, Joost

    2017-01-01

    The majority of foods that are consumed in our developed society have been processed. Processing promotes a non-enzymatic reaction between proteins and sugars, the Maillard reaction (MR). Maillard reaction products (MRPs) contribute to the taste, smell and color of many food products, and thus influence consumers’ choices. However, in recent years, MRPs have been linked to the increasing prevalence of diet- and inflammation-related non-communicable diseases including food allergy. Although during the last years a better understanding of immunogenicity of MRPs has been achieved, still only little is known about the structural/chemical characteristics predisposing MRPs to interact with antigen presenting cells (APCs). This report provides a comprehensive review of recent studies on the influence of the Maillard reaction on the immunogenicity and allergenicity of food proteins. PMID:28777346

  6. Food Processing: The Influence of the Maillard Reaction on Immunogenicity and Allergenicity of Food Proteins.

    Teodorowicz, Malgorzata; van Neerven, Joost; Savelkoul, Huub

    2017-08-04

    The majority of foods that are consumed in our developed society have been processed. Processing promotes a non-enzymatic reaction between proteins and sugars, the Maillard reaction (MR). Maillard reaction products (MRPs) contribute to the taste, smell and color of many food products, and thus influence consumers' choices. However, in recent years, MRPs have been linked to the increasing prevalence of diet- and inflammation-related non-communicable diseases including food allergy. Although during the last years a better understanding of immunogenicity of MRPs has been achieved, still only little is known about the structural/chemical characteristics predisposing MRPs to interact with antigen presenting cells (APCs). This report provides a comprehensive review of recent studies on the influence of the Maillard reaction on the immunogenicity and allergenicity of food proteins.

  7. Economic assessment of advanced flue gas desulfurization processes. Final report

    Bierman, G. R.; May, E. H.; Mirabelli, R. E.; Pow, C. N.; Scardino, C.; Wan, E. I.

    1981-09-01

    This report presents the results of a project sponsored by the Morgantown Energy Technology Center (METC). The purpose of the study was to perform an economic and market assessment of advanced flue gas desulfurization (FGD) processes for application to coal-fired electric utility plants. The time period considered in the study is 1981 through 1990, and costs are reported in 1980 dollars. The task was divided into the following four subtasks: (1) determine the factors affecting FGD cost evaluations; (2) select FGD processes to be cost-analyzed; (3) define the future electric utility FGD system market; and (4) perform cost analyses for the selected FGD processes. The study was initiated in September 1979, and separate reports were prepared for the first two subtasks. The results of the latter two subtasks appear only in this final reprot, since the end-date of those subtasks coincided with the end-date of the overall task. The Subtask 1 report, Criteria and Methods for Performing FGD Cost Evaluations, was completed in October 1980. A slightly modified and condensed version of that report appears as appendix B to this report. The Subtask 2 report, FGD Candidate Process Selection, was completed in January 1981, and the principal outputs of that subtask appear in Appendices C and D to this report.

  8. Cognitive Load Alters Neuronal Processing of Food Odors.

    Hoffmann-Hensel, Sonja Maria; Sijben, Rik; Rodriguez-Raecke, Rea; Freiherr, Jessica

    2017-10-31

    Obesity is a major health concern in modern societies. Although decreased physical activity and enhanced intake of high-caloric foods are important risk factors for developing obesity, human behavior during eating also plays a role. Previous studies have shown that distraction while eating increases food intake and leads to impaired processing of food stimuli. As olfaction is the most important sense involved in flavor perception, we used functional magnetic resonance imaging techniques to investigate the influence of cognitive memory load on olfactory perception and processing. Low- and high-caloric food odors were presented in combination with either low or high cognitive loads utilizing a memory task. The efficacy of the memory task was verified by a decrease in participant recall accuracy and an increase in skin conductance response during high cognitive load. Our behavioral data reveal a diminished perceived intensity for low- but not high-caloric food odors during high cognitive load. For low-caloric food odors, bilateral orbitofrontal (OFC) and piriform cortices (pirC) showed significantly lower activity during high compared with low cognitive load. For high-caloric food odors, a similar effect was established in pirC, but not in OFC. Insula activity correlates with higher intensity ratings found during the low cognitive load condition. We conclude lower activity in pirC and OFC to be responsible for diminished intensity perception, comparable to results in olfactory impaired patients and elderly. Further studies should investigate the influence of olfactory/gustatory intensities on food choices under distraction with special regards to low-caloric food. © The Author 2017. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  9. Food packaging materials and radiation processing of food: a brief review

    Chuaqui-Offermanns, N.

    1989-01-01

    Food is usually packaged to prevent microbial contamination and spoilage. Ionizing radiation can be applied to food-packaging materials in two ways: (i) sterilization of packaging materials for aseptic packaging, and (ii) radiation processing of prepackaged food. In aseptic packaging, a sterile package is filled with a sterile product in a microbiologically controlled environment. In irradiation of prepackaged food, the food and the packaging material are irradiated simultaneously. For both applications, the radiation stability of the packaging material is a key consideration if the technology is to be used successfully. To demonstrate the radiation stability of the packaging material, it must be shown that irradiation does not significantly alter the physical and chemical properties of the material. The irradiated material must protect the food from environmental contamination while maintaining its organoleptic and toxicological properties. Single-layer plastics cannot meet the requirements of either application. Multilayered structures produced by coextrusion would likely satisfy the demands of radiation processing prepackaged food. In aseptic packaging, the package is irradiated prior to filling, making demands on toxicological safety less stringent. Therefore, multilayered structures produced by coextrusion, lamination or co-injection moulding could satisfy the requirements. (author)

  10. Adoptable Interventions, Human Health, and Food Safety Considerations for Reducing Sodium Content of Processed Food Products.

    Allison, Abimbola; Fouladkhah, Aliyar

    2018-02-01

    Although vital for maintaining health when consumed in moderation, various epidemiological studies in recent years have shown a strong association between excess dietary sodium with an array of health complications. These associations are robust and clinically significant for development of hypertension and prehypertension, two of the leading causes of preventable mortality worldwide, in adults with a high-sodium diet. Data from developed nations and transition economies show worldwide sodium intake of higher than recommended amounts in various nations. While natural foods typically contain a moderate amount of sodium, manufactured food products are the main contributor to dietary sodium intake, up to 75% of sodium in diet of American adults, as an example. Lower cost in formulation, positive effects on organoleptic properties of food products, effects on food quality during shelf-life, and microbiological food safety, make sodium chloride a notable candidate and an indispensable part of formulation of various products. Although low-sodium formulation of each product possesses a unique set of challenges, review of literature shows an abundance of successful experiences for products of many categories. The current study discusses adoptable interventions for product development and reformulation of products to achieve a modest amount of final sodium content while maintaining taste, quality, shelf-stability, and microbiological food safety.

  11. Adoptable Interventions, Human Health, and Food Safety Considerations for Reducing Sodium Content of Processed Food Products

    Allison, Abimbola; Fouladkhah, Aliyar

    2018-01-01

    Although vital for maintaining health when consumed in moderation, various epidemiological studies in recent years have shown a strong association between excess dietary sodium with an array of health complications. These associations are robust and clinically significant for development of hypertension and prehypertension, two of the leading causes of preventable mortality worldwide, in adults with a high-sodium diet. Data from developed nations and transition economies show worldwide sodium intake of higher than recommended amounts in various nations. While natural foods typically contain a moderate amount of sodium, manufactured food products are the main contributor to dietary sodium intake, up to 75% of sodium in diet of American adults, as an example. Lower cost in formulation, positive effects on organoleptic properties of food products, effects on food quality during shelf-life, and microbiological food safety, make sodium chloride a notable candidate and an indispensable part of formulation of various products. Although low-sodium formulation of each product possesses a unique set of challenges, review of literature shows an abundance of successful experiences for products of many categories. The current study discusses adoptable interventions for product development and reformulation of products to achieve a modest amount of final sodium content while maintaining taste, quality, shelf-stability, and microbiological food safety. PMID:29389843

  12. Standardization of Thermal Processes for Local Foods with Emphasis on Low-Acid Foods

    Estrella Alabastro

    1980-01-01

    Full Text Available The minimum process for selected low acid foods was established based on the thermal death time (TDT of P.A. 3679 in the food and the heat penetration characteristics of the food products. The products studied were: (a vegetable products - green papaya, langka, sitao, mushroom, waterchestnut and baby corn; (b meat products - lechon, paksiw, dinuguan, longaniza and caldereta; and (c seafood products - squid adobo. The integrated lethality approach was adopted for process calculations recommended by Stumbo (1973.The minimum thermal process was tested by a pilot scale production followed by microbiological, physico-chemical and sensory evaluation tests to check the soundness of the product.Preliminary research on the effect of the minimum process established on the retention of nutrients, particularly thiamine, was also carried out for lechon paksiw and sitao.

  13. Detailed process design based on genomics of survivors of food preservation processes

    Brul, S.; Klis, F.M.; Oomes, S.J.C.M.; Montijn, R.C.; Schuren, F.H.J.; Coote, P.; Hellingwerf, K.J.

    2002-01-01

    The food processing industry is faced with an ever-increasing demand for safe and minimally processed wholesome foods. In order to come to a knowledge-based rather than a mainly empirical combination of appropriate preservation hurdles, we will introduce the application of the recently booming

  14. Food-safe modification of stainless steel food processing surfaces to reduce bacterial biofilms.

    Awad, Tarek Samir; Asker, Dalal; Hatton, Benjamin D

    2018-06-11

    Biofilm formation on stainless steel (SS) surfaces of food processing plants, leading to foodborne illness outbreaks, is enabled by the attachment and confinement within microscale cavities of surface roughness (grooves, scratches). We report Foodsafe Oil-based Slippery Coatings (FOSCs) for food processing surfaces that suppress bacterial adherence and biofilm formation by trapping residual oil lubricant within these surface cavities to block microbial growth. SS surfaces were chemically functionalized with alkylphosphonic acid to preferentially wet a layer of food grade oil. FOSCs reduced the effective surface roughness, the adhesion of organic food residue, and bacteria. FOSCs significantly reduced Pseudomonas aeruginosa biofilm formation on standard roughness SS-316 by 5 log CFU cm-2, and by 3 log CFU cm-2 for mirror-finished SS. FOSCs also enhanced surface cleanability, which we measured by bacterial counts after conventional detergent cleaning. Importantly, both SS grades maintained their anti-biofilm activity after erosion of the oil layer by surface wear with glass beads, which suggests there is a residual volume of oil that remains to block surface cavity defects. These results indicate the potential of such low-cost, scalable approaches to enhance the cleanability of SS food processing surfaces and improve food safety by reducing biofilm growth.

  15. Plan for advanced microelectronics processing technology application. Final report

    Goland, A.N.

    1990-10-01

    The ultimate objective of the tasks described in the research agreement was to identify resources primarily, but not exclusively, within New York State that are available for the development of a Center for Advanced Microelectronics Processing (CAMP). Identification of those resources would enable Brookhaven National Laboratory to prepare a program plan for the CAMP. In order to achieve the stated goal, the principal investigators undertook to meet the key personnel in relevant NYS industrial and academic organizations to discuss the potential for economic development that could accompany such a Center and to gauge the extent of participation that could be expected from each interested party. Integrated of these discussions was to be achieved through a workshop convened in the summer of 1990. The culmination of this workshop was to be a report (the final report) outlining a plan for implementing a Center in the state. As events unfolded, it became possible to identify the elements of a major center for x-ray lithography on Lone Island at Brookhaven National Laboratory. The principal investigators were than advised to substitute a working document based upon that concept in place of a report based upon the more general CAMP workshop originally envisioned. Following that suggestion from the New York State Science and Technology Foundation, the principals established a working group consisting of representatives of the Grumman Corporation, Columbia University, the State University of New York at Stony Brook, and Brookhaven National Laboratory. Regular meetings and additional communications between these collaborators have produced a preproposal that constitutes the main body of the final report required by the contract. Other components of this final report include the interim report and a brief description of the activities which followed the establishment of the X-ray Lithography Center working group.

  16. Chemiclearance of food irradiation process: Its scientific basis

    Brynjolfsson, A.

    1981-01-01

    Irradiation can facilitate preservation and distribution of food; it can reduce the need for chemical additives and pesticides; and it can reduce the overall use of energy. Often, industry must make changes because of seasonal variation in supply. Application of food irradiation will be difficult, therefore, unless industry can adjust to these changes, which require a broad clearance, or that food irradiation be cleared as a process. Basic to such broad clearance is a thorough understanding of the changes that take place so that the results of animal feeding studies can be extrapolated to foods similar to those used in the animal feeding studies. Such extrapolation is sometimes called chemiclearance. The extensive research on the safety of irradiated foods is summarized and the following major categories discussed: (a) theory of interaction of radiation with food; (b) chemical analysis of the radiolytic products and measurements of their yields as a function of the chemical composition of the food, temperature, dose, and dose-rates; (c) toxicological evaluation of the radiolytic compounds; and (d) toxicological evaluation of short-term and long-term animal feeding studies, mutagenicity studies, teratogenicity studies, and anti-metabolite studies. (author)

  17. BENEFICIAL FACE OF BACTERIOPHAGES: APPLICATIONS IN FOOD PROCESSING

    H. V. Raghu

    2012-06-01

    Full Text Available Foods are processed to make them available at all places; consequently, our awareness regarding hygiene measures in food production has also increased dramatically over the last decades. In many countries cases associated with foodborne infectious are increased. However, available techniques are unable to effectively control the problem. Further, exploring novel methods and technologies for ensuring the safety of food with effective quality control approaches are under research. Phages are the natural enemies of bacteria, and are more specific to host renders them ideal candidates for applications designed to increase food safety during the production process. Scientific findings are available showing the possibility to use as biocontrol agents against various pathogens with out interfering with the natural microflora or the cultures in fermented products. Furthermore, phages or phage derived proteins can also be used to detect the presence of unwanted pathogens in food or the production environments, which allows quick and sp ecific identification of viable cells. Bacteriophages are natural, found in various environments including water; foods etc. and are not found significantly influence the human cells.

  18. Minimally Processed Functional Foods: Technological and Operational Pathways.

    Rodgers, Svetlana

    2016-10-01

    This paper offers a concise review of technical and operational concepts underpinning commercialization of minimally processed functional foods (FFs), foods with fresh-like qualities commanding premium prices. The growing number of permitted nutritional content/health claims, many of which relate to well-being, coupled with emerging extraction and food processing technologies offers new exciting opportunities for small and medium size enterprises (SMEs) specializing in fresh produce to play an active role in the health market. Supporting SMEs, governments could benefit from savings in healthcare costs and value creation in the economy. Consumers could benefit from novel FF formats such as refrigerated RTE (ready-to-eat) meals, a variety of fresh-like meat-, fish-, and egg-based products, fresh-cut fruits and vegetables, cereal-based fermented foods and beverages. To preserve these valuable commodities, mild biological (enzymatic treatment, fermentation and, bio-preservation) and engineering solutions are needed. The latter include nonthermal techniques such as high-pressure treatment, cook-chill, sous-vide, mirco-encapsulation, vacuum impregnation and others. "De-constructive" culinary techniques such as 3D food printing and molecular gastronomy as well as developments in nutrigenomics and digital technologies facilitate novel product formats, personalization and access to niche markets. In the operational sense, moving from nourishment to health improvement demands a shift from defensive market-oriented to offensive market-developing strategies including collaborative networks with research organizations. © 2016 Institute of Food Technologists®.

  19. Solutions for the food processing industry; Shokuhin seizogyo solution

    Toda, T; Iwami, N [Fuji Electric Co. Ltd., Tokyo (Japan)

    1999-09-10

    To improve quality control and maintain stable operation, the food processing industry requires problem solutions in total, including not only processing and operation control divisions but also quality control, design and production technology, and maintenance divisions. This paper describes solutions for HACCP (hazard analysis critical control point) support, quality control, and maintenance, in order to improve the quality level, ensure traceability and realize stable processing operations. (author)

  20. Business process of reputation management of food industry enterprises

    Derevianko Olena. H.

    2014-01-01

    The goal of the article is development of the methodical base of reputation management directed at formalisation of theoretical provisions and explanation how to organise reputation management at food industry enterprises. The article shows prospectiveness of use of the Business Process Management concept in reputation management. Using the diagram of the Reputation Management business process environment the article shows its key participants (suppliers and clients of the business process) a...

  1. Generation of low-temperature air plasma for food processing

    Stepanova, Olga; Demidova, Maria; Astafiev, Alexander; Pinchuk, Mikhail; Balkir, Pinar; Turantas, Fulya

    2015-11-01

    The project is aimed at developing a physical and technical foundation of generating plasma with low gas temperature at atmospheric pressure for food industry needs. As known, plasma has an antimicrobial effect on the numerous types of microorganisms, including those that cause food spoilage. In this work an original experimental setup has been developed for the treatment of different foods. It is based on initiating corona or dielectric-barrier discharge in a chamber filled with ambient air in combination with a certain helium admixture. The experimental setup provides various conditions of discharge generation (including discharge gap geometry, supply voltage, velocity of gas flow, content of helium admixture in air and working pressure) and allows for the measurement of the electrical discharge parameters. Some recommendations on choosing optimal conditions of discharge generation for experiments on plasma food processing are developed.

  2. Conditions and constraints of food processing in space

    Fu, B.; Nelson, P. E.; Mitchell, C. A. (Principal Investigator)

    1994-01-01

    Requirements and constraints of food processing in space include a balanced diet, food variety, stability for storage, hardware weight and volume, plant performance, build-up of microorganisms, and waste processing. Lunar, Martian, and space station environmental conditions include variations in atmosphere, day length, temperature, gravity, magnetic field, and radiation environment. Weightlessness affects fluid behavior, heat transfer, and mass transfer. Concerns about microbial behavior include survival on Martian and lunar surfaces and in enclosed environments. Many present technologies can be adapted to meet space conditions.

  3. Guar gum: processing, properties and food applications-A Review.

    Mudgil, Deepak; Barak, Sheweta; Khatkar, Bhupendar Singh

    2014-03-01

    Guar gum is a novel agrochemical processed from endosperm of cluster bean. It is largely used in the form of guar gum powder as an additive in food, pharmaceuticals, paper, textile, explosive, oil well drilling and cosmetics industry. Industrial applications of guar gum are possible because of its ability to form hydrogen bonding with water molecule. Thus, it is chiefly used as thickener and stabilizer. It is also beneficial in the control of many health problems like diabetes, bowel movements, heart disease and colon cancer. This article focuses on production, processing, composition, properties, food applications and health benefits of guar gum.

  4. The formalization of innovative processes of food technology equipment

    V. A. Panfilov

    2016-01-01

    Full Text Available Improving the efficiency of scientific and engineering work to develop methods for converting agricultural raw materials into food is the most important condition of output processing and food sectors of agriculture in the sixth technological structure. The purpose of this article is to formalize the process of creating a progressive technique of food technologies. The process of self-organizing technological systems, presents a model of dual mechanism of control with regard to the processes of food technology. It is shown that in the process of adaptation development of the technological system as purposefully improving the structure and functioning of the system: increases the efficiency of interaction with the external environment. This smoothed out the contradictions of the technological system and its the main thing, the main technical contradiction: «productivity – quality». The steps to be taken to ensure that the technological system of conditions for intensive development. It is concluded that the potential development of some technological systems is hidden in the perspective of automation, and others – is associated with adaptive development processes, in particular machines, devices and bioreactors. The paper shows that innovative and truly breakthrough developments leading to the creation of fundamentally new equipment and new generations of technological systems, possible only with the establishment of patterns of organization, structure, functioning and development of open systems, which are modern technologies of agriculture. The mechanism of control of technological object acts as a core of adaptive development, which implements the anti-entropic entity management object, formalizing the innovation process of innovative food processing technologies.

  5. Final gastric emptying of solid food in healthy subjects: Determined by X-ray examination and radionuclide imaging

    Bolving, L.; Noer, I.; Soegaard, P.; Christensen, T.; Funch-Jensen, P.; Thommesen, P.; Kommunehospital, Aarhus

    1990-01-01

    In ten healthy subjects final gastric emptying of solid food was measured by a new scintigraphic mehtod, employing 99m Tc labelled pellets, and compared to a radiologic method, employing food with incorporated barium suspension. Final gastric emptying of solid food, measured by the scintigraphic technique, was 5.2 hours and with the radiographic technique 5.5 hours, with no significant difference. It is concluded that significant information concerning gastric emptying of solid food can be obtained by the radiological method. (orig.) [de

  6. Ionizing energy in food processing and pest control. 1. Wholesomeness of food treated with ionizing energy

    Wierbicki, Eugen

    1986-01-01

    Congressional concerns about the use of ionizing energy for food preservation and to control pests in food products for export and domestic use promoted the preparation of this report by a special task force of the Council for Agricultural Science and Technology (CAST). An overview surveys research conducted on the toxicological safety, nutritional quality, and microbiological safety of foods treated with ionizing energy. Background information is provided on various types of electromagnetic radiation, effects of ionizing energy level and dose, sources of natural background radiation and induced radioactivity, and the nature and safety of various radiolytic products. Objectives, methodologies, and problems associated with feeding studies of toxicological safety are outlined; results of scientific studies, U.S. government wholesomeness studies, and international feeding studies are summarized. Studies on the nutritional value of food products processed using ionized energy have examined the effects of ionizing energy on 1) composite diets, 2) carbohydrates, 3) fats, 4) proteins and amino acids, 5) vitamins (potatoes, onions, fruits, meat, seafood, cereals, vegetables, dairy products, oils), 6) antivitamins, and 7) minerals. The report concludes that currently available scientific evidence indicates that foods exposed to ionizing energy under the conditions proposed for commercial application are 1) wholesome (safe to eat) and 2) comparable in nutritional adequacy to fresh or conventionally processed foods

  7. Food formulation and not processing level: Conceptual divergences between public health and food science and technology sectors.

    Botelho, R; Araújo, W; Pineli, L

    2018-03-04

    Observed changes in eating and drinking behaviors in economically developing countries are associated with increase of obesity and related chronic diseases. Researchers from field of public health (PH) have attributed this problem to food processing and have created new food classification systems to support their thesis. These classifications conceptually differ from processing level concepts in food science, and state to people that food processing is directly related to nutritional impact of food. Our work aims to compare the concept of food processing from the standpoint of food science and technology (FST) and public health and to discuss differences related to formulation or level of processing of products and their impact on nutritional quality. There is a misconception between food processing/unit operation/food technology and formulation or recipes. For the public health approach, classification is based on food products selection and the use of ingredients that results in higher consumption of sugar, sodium, fat, and additives, whereas in FST, processing level is based on the intensity and amount of unit operations to enhance shelf life, food safety, food quality, and availability of edible parts of raw materials. Nutritional quality of a product or preparation is associated with formulation/recipe and not with the level of processing, with few exceptions. The impact of these recommendations on the actual comprehension of food processing and quality must be considered by the population.

  8. Ultra-processed food purchases in Norway: a quantitative study on a representative sample of food retailers.

    Solberg, Siri Løvsjø; Terragni, Laura; Granheim, Sabrina Ionata

    2016-08-01

    To identify the use of ultra-processed foods - vectors of salt, sugar and fats - in the Norwegian diet through an assessment of food sales. Sales data from a representative sample of food retailers in Norway, collected in September 2005 (n 150) and September 2013 (n 170), were analysed. Data consisted of barcode scans of individual food item purchases, reporting type of food, price, geographical region and retail concept. Foods were categorized as minimally processed, culinary ingredients, processed products and ultra-processed. Indicators were share of purchases and share of expenditure on food categories. Six geographical regions in Norway. The barcode data included 296 121 observations in 2005 and 501 938 observations in 2013. Ultra-processed products represented 58·8 % of purchases and 48·8 % of expenditure in 2013. Minimally processed foods accounted for 17·2 % of purchases and 33·0 % of expenditure. Every third purchase was a sweet ultra-processed product. Food sales changed marginally in favour of minimally processed foods and in disfavour of processed products between 2005 and 2013 (χ 2 (3)=203 195, Pprocessed products accounted for the majority of food sales in Norway, indicating a high consumption of such products. This could be contributing to rising rates of overweight, obesity and non-communicable diseases in the country, as findings from other countries indicate. Policy measures should aim at decreasing consumption of ultra-processed products and facilitating access (including economic) to minimally processed foods.

  9. Aluminium content of some processed foods, raw materials and food additives in China by inductively coupled plasma-mass spectrometry.

    Deng, Gui-Fang; Li, Ke; Ma, Jing; Liu, Fen; Dai, Jing-Jing; Li, Hua-Bin

    2011-01-01

    The level of aluminium in 178 processed food samples from Shenzhen city in China was evaluated using inductively coupled plasma-mass spectrometry. Some processed foods contained a concentration of up to 1226 mg/kg, which is about 12 times the Chinese food standard. To establish the main source in these foods, Al levels in the raw materials were determined. However, aluminium concentrations in raw materials were low (0.10-451.5 mg/kg). Therefore, aluminium levels in food additives used in these foods was determined and it was found that some food additives contained a high concentration of aluminium (0.005-57.4 g/kg). The results suggested that, in the interest of public health, food additives containing high concentrations of aluminium should be replaced by those containing less. This study has provided new information on aluminium levels in Chinese processed foods, raw materials and a selection of food additives.

  10. Induction-linear accelerators for food processing with ionizing radiation

    Lagunas-Solar, M.C.

    1985-01-01

    Electron accelerators with sufficient beam power and reliability of operation will be required for applications in the large-scale radiation processing of food. Electron beams can be converted to the more penetrating bremsstrahlung radiation (X-rays), although at a great expense in useful X-ray power due to small conversion efficiencies. Recent advances in the technology of pulse-power accelerators indicates that Linear Induction Electron Accelerators (LIEA) are capable of sufficiently high-beam current and pulse repetition rate, while delivering ultra-short pulses of high voltage. The application of LIEA systems in food irradiation provides the potential for high product output and compact, modular-type systems readily adaptable to food processing facilities. (orig.)

  11. Induction and reversion process of molecular and cytological alterations after highly irradiated food ingestion in mice

    Rojo M, M.I.; Fernandez C, M.

    1984-01-01

    The molecular and cytological alterations induced in a mammal (Mus musculus) fed ad libitum with a balanced pellet diet irradiated with 50 KGy gamma radiation from weaning, for different periods, are analyzed. The transient chromosomal changes that recall tumor-like phenomena could be the expression of the damage and repair processes induced by changed molecules present in irradiated food. The reversible alterations of DNA structure and cytoplasmatic soluble proteins observed in mice fed with irradiated pellet diet could be interpreted as a result of the enhancement of the repair processes which could also explain the significant increase of the radioresistance of DNA found at 200 days after irradiated food ingestion. Finally, our results would suggest an induction of a pseudo-neoplasia due to a prolongated and exclusive ingestion of food irradiated with sterilizing gamma dose. Moreover, the maintenance of the irradiated diet induce the reversion of the observed phenomena by an eventual activation of the repair mechanisms. (Author)

  12. Evaluation of economic efficiency of process improvement in food packaging

    Jana Hron

    2012-01-01

    Full Text Available In general, we make gains in process by the three fundamental ways. First, we define or redefine our process in a strategic sense. Second, once defined or redefined, we commence process operations and use process control methods to target and stabilize our process. Third, we use process improvement methods, as described in this paper, along with process control to fully exploit our process management and/or technology. Process improvement is focused primarily in our subprocesses and sub-subprocesses. Process leverage is the key to process improvement initiatives. This means that small improvements of the basic manufacturing operations can have (with the assumption of mass repetition of the operation a big impact on the functioning of the whole production unit. The complexity within even small organizations, in people, products, and processes, creates significant challenges in effectively and efficiently using these initiatives tools. In this paper we are going to place process purposes in the foreground and initiatives and tools in the background as facilitator to help accomplish process purpose. Initiatives and tools are not the ends we are seeking; result/outcomes in physical, economics, timeliness, and customer service performance matter. In the paper process boundaries (in a generic sense are set by our process purpose and our process definition. Process improvement is initiated within our existing process boundaries. For example, in a fast-food restaurant, if we define our cooking process around a frying technology, then we provide process improvements within our frying technology. On the other hand, if we are considering changing to a broiling technology, then we are likely faced with extensive change, impacting our external customers, and a process redefinition may be required. The result / aim of the paper are based on the example of the process improving of a food packaging quality. Specifically, the integration of two approaches

  13. FOOD PROCESSING TECHNOLOGY AS A MEDIATOR OF FUNCTIONALITY. STRUCTURE-PROPERTY-PROCESS RELATIONSHIPS

    Ester Betoret

    2015-02-01

    Full Text Available During the last years, the food industry has been facing technical and economic changes both in society and in the food processing practices, paying high attention to food products that meet the consumers´ demands. In this direction, the study areas in food process and products have evolved mainly from safety to other topics such as quality, environment or health. The improvement of the food products is now directed towards ensuring nutritional and specific functional benefits. Regarding the processes evolution, they are directed to ensure the quality and safety of environmentally friendly food products produced optimizing the use of resources, minimally affecting or even enhancing their nutritional and beneficial characteristics. The product structure both in its raw form and after processing plays an important role maintaining, enhancing and delivering the bioactive compounds in the appropriate target within the organism. The aim of this review is to make an overview on some synergistic technologies that can constitute a technological process to develop functional foods, enhancing the technological and/or nutritional functionality of the food products in which they are applied. More concretely, the effect of homogenization, vacuum impregnation and drying operations on bioactive compounds have been reviewed, focusing on the structure changes produced and its relationship on the product functionality, as well as on the parameters and the strategies used to quantify and increase the achieved functionality.

  14. Ultra-processed foods and the limits of product reformulation.

    Scrinis, Gyorgy; Monteiro, Carlos Augusto

    2018-01-01

    The nutritional reformulation of processed food and beverage products has been promoted as an important means of addressing the nutritional imbalances in contemporary dietary patterns. The focus of most reformulation policies is the reduction in quantities of nutrients-to-limit - Na, free sugars, SFA, trans-fatty acids and total energy. The present commentary examines the limitations of what we refer to as 'nutrients-to-limit reformulation' policies and practices, particularly when applied to ultra-processed foods and drink products. Beyond these nutrients-to-limit, there are a range of other potentially harmful processed and industrially produced ingredients used in the production of ultra-processed products that are not usually removed during reformulation. The sources of nutrients-to-limit in these products may be replaced with other highly processed ingredients and additives, rather than with whole or minimally processed foods. Reformulation policies may also legitimise current levels of consumption of ultra-processed products in high-income countries and increased levels of consumption in emerging markets in the global South.

  15. Intermediate product selection and blending in the food processing industry

    Kilic, Onur A.; Akkerman, Renzo; van Donk, Dirk Pieter; Grunow, Martin

    2013-01-01

    This study addresses a capacitated intermediate product selection and blending problem typical for two-stage production systems in the food processing industry. The problem involves the selection of a set of intermediates and end-product recipes characterising how those selected intermediates are

  16. Recontamination in food processing : quantitative modelling for risk assessment

    Aantrekker, den E.

    2002-01-01

    Every year at least 1.5 to 6% of the Dutch population suffers from foodborne illnesses. This may result in symptoms like vomiting or diarrhoea but can in some cases also lead to death. Processes like pasteurisation or sterilisation reduce the number of pathogenic bacteria in food products.

  17. 48 CFR 870.111-5 - Frozen processed food products.

    2010-10-01

    ... products. (3) Frozen bakery products. (b) All procured frozen processed food products that contain meat... frozen bakery products that ship products in interstate commerce are required to comply with the Federal... products. 870.111-5 Section 870.111-5 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS...

  18. 7 CFR 1131.19 - Commercial food processing establishment.

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Commercial food processing establishment. 1131.19 Section 1131.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE ARIZONA MARKETING AREA Order Regulating Handling Definition...

  19. Food Processing and Agriculture. Wisconsin Annual Farm Labor Report, 1968.

    Wisconsin State Employment Service, Madison.

    A yearly report on the migrant farm worker situation in Wisconsin evaluates the year 1968 in relation to past years and makes projections for the future. Comparisons are made of trends in year-round employment practices, seasonal food processing, the cherry industry, and the cucumber industry. The report includes a discussion on the social aspects…

  20. Customer-driven manufacturing in the food processing industry

    Donk, D.P. van

    2000-01-01

    Food processing industry copes with high logistical demands from its customers. This paper studies a company changing to more customer (order) driven manufacturing. In order to help decide which products should be made to order and which made to stock, a frame is developed and applied to find and

  1. 7 CFR 1124.19 - Commercial food processing establishment.

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Commercial food processing establishment. 1124.19 Section 1124.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE PACIFIC NORTHWEST MARKETING AREA Order Regulating Handling...

  2. 7 CFR 1030.19 - Commercial food processing establishment.

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Commercial food processing establishment. 1030.19 Section 1030.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE UPPER MIDWEST MARKETING AREA Order Regulating Handling...

  3. 7 CFR 1005.19 - Commercial food processing establishment.

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Commercial food processing establishment. 1005.19 Section 1005.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE APPALACHIAN MARKETING AREA Order Regulating Handling...

  4. 7 CFR 1033.19 - Commercial food processing establishment.

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Commercial food processing establishment. 1033.19 Section 1033.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE MIDEAST MARKETING AREA Order Regulating Handling Definition...

  5. 7 CFR 1006.19 - Commercial food processing establishment.

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Commercial food processing establishment. 1006.19 Section 1006.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE FLORIDA MARKETING AREA Order Regulating Handling Definition...

  6. 7 CFR 1032.19 - Commercial food processing establishment.

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Commercial food processing establishment. 1032.19 Section 1032.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE CENTRAL MARKETING AREA Order Regulating Handling Definition...

  7. 7 CFR 1001.19 - Commercial food processing establishment.

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Commercial food processing establishment. 1001.19 Section 1001.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE NORTHEAST MARKETING AREA Order Regulating Handling...

  8. 7 CFR 1007.19 - Commercial food processing establishment.

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Commercial food processing establishment. 1007.19 Section 1007.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE SOUTHEAST MARKETING AREA Order Regulating Handling...

  9. 7 CFR 1000.19 - Commercial food processing establishment.

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Commercial food processing establishment. 1000.19 Section 1000.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Milk), DEPARTMENT OF AGRICULTURE GENERAL PROVISIONS OF FEDERAL MILK MARKETING ORDERS Definitions §...

  10. 7 CFR 1126.19 - Commercial food processing establishment.

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Commercial food processing establishment. 1126.19 Section 1126.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE SOUTHWEST MARKETING AREA Order Regulating Handling...

  11. Product development practice in medium-sized food processing companies

    Harmsen, Hanne

    Market orientation has in numerous empirical NPD-studies been identified as critical for success. However, this study reveals a severe gap between the normative implications regarding market orientation and current product development practice in number of Danish food-processing companies. Through...

  12. Intermediate product selection and blending in the food processing industry

    Kilic, Onur A.; Akkerman, Renzo; van Donk, Dirk Pieter

    2013-01-01

    This study addresses a capacitated intermediate product selection and blending problem typical for two-stage production systems in the food processing industry. The problem involves the selection of a set of intermediates and end-product recipes characterising how those selected intermediates...

  13. the economic importance of microorganism in food processing

    BSN

    This paper attempts to highlight the Economic Importance of microorganisms in food processing and manufacturing; it goes further to differentiate between the desirable ... Desirable importance are those cost saving and revenue generating activities ... Microorganism (yeast) play very useful role in the Bakery industries.

  14. Food Processing and Marketing: New Directions...New Opportunities.

    Welch, Mary A., Ed.

    1995-01-01

    This issue uses tomato processing to illustrate the new directions and opportunities available in the food market. Comparative advantage and economies of scale are discussed in relation to markets. Forecasting success in the market is attributed to studying consumer consumption trends by type and monitoring standards of living in 32 newly…

  15. Allergens labeling on French processed foods - an Oqali study.

    Battisti, Charlène; Chambefort, Amélie; Digaud, Olivier; Duplessis, Barbara; Perrin, Cécile; Volatier, Jean-Luc; Gauvreau-Béziat, Julie; Menard, Céline

    2017-07-01

    The French Observatory of Food Quality (Oqali) aims at collecting all nutritional data provided on labels of processed foods (nutritional information and composition), at branded products level, in order to follow nutritional labeling changes over time. This study carries out an overview of allergens labeling frequencies by distinguishing allergens used in recipes from those listed on precautionary statements, for the fourteen allergen categories for which labeling is mandatory according to European legislation. 17,309 products were collected, between 2008 and 2012, from 26 food categories. Products were classified per family and type of brand (national brands, retailer brands, entry-level retailer brands, hard discount, and specialized retailer brands). Allergenic ingredients were identified from ingredients lists and precautionary statements. 73% of the 17,309 products studied contained at least one allergen in their ingredients list and 39% had a precautionary statement for one or more allergens. Milk (53%), gluten (41%), and egg (22%) were the most commonly used allergens in ingredients lists. For precautionary statement, nuts (20%), egg (14%), peanut (13%), soybean (12%), and milk (11%) were the most common allergens listed. Precautionary statement was most frequently found among first-price products (hard discount and entry-level retailer brands). National brands seemed to use it less frequently. For all these results, differences depended both on food categories and allergen categories. This study will enable to follow allergens labeling and their use as ingredients over time, particularly by assessing an hypothetical increase in allergens presence in processed food.

  16. Alanine-EPR dosimetry in 10 MeV electron beam to optimize process parameters for food irradiation

    Sanyal, B.; Kumar, S.; Kumar, M.; Mittal, K.C.; Sharma, A.

    2011-01-01

    Absorbed dose in a food product is determined and controlled by several components of the LINAC irradiation facility as well as the product. Standardization of the parameters characterizing the facility components, process load and the irradiation conditions collectively termed as 'process parameters' are of paramount importance for successful dose delivery to the food products. In the present study alanine-EPR dosimetry system was employed to optimize the process parameters of 10 MeV electron beam of a LINAC facility for commercial irradiation of food. Three sets of experiments were carried out with different food commodities namely, mango, potato and rawa with the available product conveying system of different irradiation geometry like one sided or both sided mode of irradiation. Three dimensional dose distributions into the process load for low dose requiring food commodities (0.25 to 1 kGy) were measured in each experiment. The actual depth dose profile in food product and useful scan width of the electron beam were found out to be satisfactory for commercial radiation processing of food. Finally a scaled up experiment with commercial food product (packets of Rawa) exhibited adequate dose uniformity ratio of 3 proving the feasibility of the facility for large scale radiation processing of food commodities. (author)

  17. Organoleptic quality and antioxidant status of radiation processed food commodities

    Chatterjee, S.; Sharma, J.; Arul, A.K.; Variyar, P.S.; Sharma, A.

    2009-01-01

    Effect of radiation processing on the organoleptic qualities such as aroma, taste and colour as well as antioxidant status of various food classes such as beverages (monsooned coffee), spices (nutmeg), fruits (pomegranate), oil seeds (soybean) and vegetables (guar beans) was investigated. The factors responsible for these attributes were shown to be liberated from their glycosidic precursors during radiation processing, thus resulted in an enhancement of organoleptic quality and antioxidant status. (author)

  18. Perspective of Micro Process Engineering for Thermal Food Treatment.

    Mathys, Alexander

    2018-01-01

    Micro process engineering as a process synthesis and intensification tool enables an ultra-short thermal treatment of foods within milliseconds (ms) using very high surface-area-to-volume ratios. The innovative application of ultra-short pasteurization and sterilization at high temperatures, but with holding times within the range of ms would allow the preservation of liquid foods with higher qualities, thereby avoiding many unwanted reactions with different temperature-time characteristics. Process challenges, such as fouling, clogging, and potential temperature gradients during such conditions need to be assessed on a case by case basis and optimized accordingly. Owing to the modularity, flexibility, and continuous operation of micro process engineering, thermal processes from the lab to the pilot and industrial scales can be more effectively upscaled. A case study on thermal inactivation demonstrated the feasibility of transferring lab results to the pilot scale. It was shown that micro process engineering applications in thermal food treatment may be relevant to both research and industrial operations. Scaling of micro structured devices is made possible through the use of numbering-up approaches; however, reduced investment costs and a hygienic design must be assured.

  19. Relationship between arsenic content of food and water applied for food processing.

    Sugár, Eva; Tatár, Enikő; Záray, Gyula; Mihucz, Victor G

    2013-12-01

    As part of a survey conducted by the Central Agricultural Office of Hungary, 67 food samples including beverages were taken from 57 food industrial and catering companies, 75% of them being small and medium-sized enterprises (SMEs). Moreover, 40% of the SMEs were micro entities. Water used for food processing was simultaneously sampled. The arsenic (As) content of solid food stuff was determined by hydride generation atomic absorption spectrometry after dry ashing. Food stuff with high water content and water samples were analyzed by inductively coupled plasma mass spectrometry. The As concentration exceeded 10 μg/L in 74% of the water samples taken from SMEs. The As concentrations of samples with high water content and water used were linearly correlated. Estimated As intake from combined exposure to drinking water and food of the population was on average 40% of the daily lower limit of WHO on the benchmark dose for a 0.5% increased incidence of lung cancer (BMDL0.5) for As. Five settlements had higher As intake than the BMDL0.5. Three of these settlements are situated in Csongrád county and the distance between them is less than 55 km. The maximum As intake might be 3.8 μg/kg body weight. Copyright © 2013 Elsevier Ltd. All rights reserved.

  20. Implementation of quality by design toward processing of food products.

    Rathore, Anurag S; Kapoor, Gautam

    2017-05-28

    Quality by design (QbD) is a systematic approach that begins with predefined objectives and emphasizes product and process understanding and process control. It is an approach based on principles of sound science and quality risk management. As the food processing industry continues to embrace the idea of in-line, online, and/or at-line sensors and real-time characterization for process monitoring and control, the existing gaps with regard to our ability to monitor multiple parameters/variables associated with the manufacturing process will be alleviated over time. Investments made for development of tools and approaches that facilitate high-throughput analytical and process development, process analytical technology, design of experiments, risk analysis, knowledge management, and enhancement of process/product understanding would pave way for operational and economic benefits later in the commercialization process and across other product pipelines. This article aims to achieve two major objectives. First, to review the progress that has been made in the recent years on the topic of QbD implementation in processing of food products and second, present a case study that illustrates benefits of such QbD implementation.

  1. Business process of reputation management of food industry enterprises

    Derevianko Olena. H.

    2014-01-01

    Full Text Available The goal of the article is development of the methodical base of reputation management directed at formalisation of theoretical provisions and explanation how to organise reputation management at food industry enterprises. The article shows prospectiveness of use of the Business Process Management concept in reputation management. Using the diagram of the Reputation Management business process environment the article shows its key participants (suppliers and clients of the business process and identifies their place in formation of the enterprise reputation. It also shows that the reputation management should be considered a business process of the highest level of management. Construction of the flow structure of the Reputation Management business process allows uncovering the logic of interrelation of inlets and outlets within the framework of the specified main stages of the business process: assessment of the current state of reputation, collection of information about stakeholders, identification of PR strategy goals, planning of necessary resources, realisation of the PR strategy, assessment of efficiency and process monitoring. The article offers the flow, functional and organisational structures of the Reputation Management business process for food industry enterprises. Moreover, justification of functional and organisational structures of the Reputation Management business process gives a possibility to distribute functions of reputation management between specific executors and establish responsibility for each stage of the business process.

  2. Deterioration of edible oils during food processing by ultrasound.

    Chemat, F; Grondin, I; Shum Cheong Sing, A; Smadja, J

    2004-01-01

    During food emulsification and processing of sunflower oil (most used edible oil), a metallic and rancid odour has been detected only for insonated oil and foods. Some off-flavour compounds (hexanal and hept-2-enal) resulting from the sono-degradation of sunflower oil have been identified. A wide variety of analytical techniques (GC determination of fatty acids, UV spectroscopy, free fatty acids and GC/MS) were used to follow the quality of insonated sunflower oil and emulsion. Different edible oils (olive, sunflower, soybean, em leader ) show significant changes in their composition (chemical and flavour) due to ultrasound treatment.

  3. 21 CFR 179.39 - Ultraviolet radiation for the processing and treatment of food.

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ultraviolet radiation for the processing and..., PROCESSING AND HANDLING OF FOOD Radiation and Radiation Sources § 179.39 Ultraviolet radiation for the processing and treatment of food. Ultraviolet radiation for the processing and treatment of food may be...

  4. Extremozymes from metagenome: Potential applications in food processing.

    Khan, Mahejibin; Sathya, T A

    2017-06-12

    The long-established use of enzymes for food processing and product formulation has resulted in an increased enzyme market compounding to 7.0% annual growth rate. Advancements in molecular biology and recognition that enzymes with specific properties have application for industrial production of infant, baby and functional foods boosted research toward sourcing the genes of microorganisms for enzymes with distinctive properties. In this regard, functional metagenomics for extremozymes has gained attention on the premise that such enzymes can catalyze specific reactions. Hence, metagenomics that can isolate functional genes of unculturable extremophilic microorganisms has expanded attention as a promising tool. Developments in this field of research in relation to food sector are reviewed.

  5. Quality control in the process and in the irradiated food

    Farrar IV, H.

    1997-01-01

    In the irradiation process, absorbed dose is the key parameter that must be controlled. In general, the minimum absorbed dose needed to accomplish a desired effect, such as insect disinfestation or pathogen reduction, is already known from previous research, and is often prescribed by government regulations. The irradiation process is effective, however, only if the food can tolerate this dose without experiencing unwanted changes in flavor or appearance. The dose that food can tolerate often depends on such things as the variety of the fruit or vegetable, where it was grown, the season in which it was harvested and the length of time between harvesting and irradiation. Once the minimum and maximum doses are established, the irradiator operator must make sure that these dose limits are not exceeded. First, a dose mapping using many dosimeters must be undertaken to determine the locations of the minimum and maximum dose in the overall process load. From then on, the process load must always be the same, and, as a key step in the overall process control, dosimeters need to be placed from time to time only at the minimum or maximum locations. The dosimeters must be calibrated and directly trackable to national or international standards, and a fool-proof method of labelling and segregating irradiated from unirradiated product must be used. Radiation sensitive indicators that may help identify irradiated from unirradiated food should not be relied upon, and are not a substitute fro proper dosimetry. (Author)

  6. Quality control in the process and in the irradiated food

    Farrar, IV, H [Chairman, ASTM Subcommittee E10.01 ` Dosimetry for Radiation Processing` , 18 Flintlock Lane, Bell Canyon, California 91307-1127 (United States)

    1998-12-31

    In the irradiation process, absorbed dose is the key parameter that must be controlled. In general, the minimum absorbed dose needed to accomplish a desired effect, such as insect disinfestation or pathogen reduction, is already known from previous research, and is often prescribed by government regulations. The irradiation process is effective, however, only if the food can tolerate this dose without experiencing unwanted changes in flavor or appearance. The dose that food can tolerate often depends on such things as the variety of the fruit or vegetable, where it was grown, the season in which it was harvested and the length of time between harvesting and irradiation. Once the minimum and maximum doses are established, the irradiator operator must make sure that these dose limits are not exceeded. First, a dose mapping using many dosimeters must be undertaken to determine the locations of the minimum and maximum dose in the overall process load. From then on, the process load must always be the same, and, as a key step in the overall process control, dosimeters need to be placed from time to time only at the minimum or maximum locations. The dosimeters must be calibrated and directly trackable to national or international standards, and a fool-proof method of labelling and segregating irradiated from unirradiated product must be used. Radiation sensitive indicators that may help identify irradiated from unirradiated food should not be relied upon, and are not a substitute fro proper dosimetry. (Author)

  7. Quality control in the process and in the irradiated food

    Farrar IV, H. [Chairman, ASTM Subcommittee E10.01 `Dosimetry for Radiation Processing`, 18 Flintlock Lane, Bell Canyon, California 91307-1127 (United States)

    1997-12-31

    In the irradiation process, absorbed dose is the key parameter that must be controlled. In general, the minimum absorbed dose needed to accomplish a desired effect, such as insect disinfestation or pathogen reduction, is already known from previous research, and is often prescribed by government regulations. The irradiation process is effective, however, only if the food can tolerate this dose without experiencing unwanted changes in flavor or appearance. The dose that food can tolerate often depends on such things as the variety of the fruit or vegetable, where it was grown, the season in which it was harvested and the length of time between harvesting and irradiation. Once the minimum and maximum doses are established, the irradiator operator must make sure that these dose limits are not exceeded. First, a dose mapping using many dosimeters must be undertaken to determine the locations of the minimum and maximum dose in the overall process load. From then on, the process load must always be the same, and, as a key step in the overall process control, dosimeters need to be placed from time to time only at the minimum or maximum locations. The dosimeters must be calibrated and directly trackable to national or international standards, and a fool-proof method of labelling and segregating irradiated from unirradiated product must be used. Radiation sensitive indicators that may help identify irradiated from unirradiated food should not be relied upon, and are not a substitute fro proper dosimetry. (Author)

  8. Traditional versus commercial food processing techniques - A comparative study based on chemical analysis of selected foods consumed in rural Zimbabwe.

    Abraham I. C. Mwadiwa

    2012-01-01

    Full Text Available With the advent of industrialisation, food processors are constantly looking for ways to cut costs, increase production and maximise profits at the expense of quality. Commercial food processors have since shifted their focus from endogenous ways of processing food to more profitable commercial food processing techniques. The aim of this study was to investigate the holistic impact of commercial food processing techniques on nutrition by comparing commercially (industrially processed food products and endogenously processed food products through chemical analysis of selected foods. Eight food samples which included commercially processed peanut butter, mealie-meal, dried vegetables (mufushwa and rice and endogenously processed peanut butter, mealie-meal, dried vegetables (mufushwa and rice were randomly sampled from rural communities in the south-eastern and central provinces of Zimbabwe. They were analysed for ash, zinc, iron, copper, magnesium, protein, fat, carbohydrates, energy, crude fibre, vitamin C and moisture contents. The results of chemical analysis indicate that endogenously processed mealie-meal, dried vegetables and rice contained higher ash values of 2.00g/100g, 17.83g/100g, and 3.28g/100g respectively than commercially processed mealie-meal, dried vegetables and rice, which had ash values of 1.56g/100g, 15.25g/100g and 1.46g/100g respectively. The results also show that endogenously processed foods have correspondingly higher iron, zinc and magnesium contents and, on the whole, a higher protein content. The results also indicate that commercially processed foods have higher fat and energy contents. The result led to the conclusion that the foods are likely to pose a higher risk of causing adverse conditions to health, such as obesity and cardiovascular diseases to susceptible individuals. Based on these findings, it can, therefore, be concluded that endogenously processed foods have a better nutrient value and health implications

  9. Food carotenoids: analysis, composition and alterations during storage and processing of foods.

    Rodriguez-Amaya, Delia B

    2003-01-01

    Substantial progress has been achieved in recent years in refining the analytical methods and evaluating the accuracy of carotenoid data. Although carotenoid analysis is inherently difficult and continues to be error prone, more complete and reliable data are now available. Rather than expressing the analytical results as retinol equivalents, there is a tendency to present the concentrations of individual carotenoids, particularly beta-carotene, beta-cryptoxanthin, alpha-carotene, lycopene, lutein and zeaxanthin, carotenoids found in the human plasma and considered to be important to human health in terms of the provitamin A activity and/or reduction of the risk for developing degenerative diseases. With the considerable effort directed to carotenoid analysis, many food sources have now been analyzed in different countries. The carotenoid composition of foods vary qualitatively and quantitatively. Even in a given food, compositional variability occurs because of factors such as stage of maturity, variety or cultivar, climate or season, part of the plant consumed, production practices, post-harvest handling, processing and storage of food. During processing, isomerization of trans-carotenoids, the usual configuration in nature, to the cis-forms occurs, with consequent alteration of the carotenoids' bioavailability and biological activity. Isomerization is promoted by light, heat and acids. The principal cause of carotenoid loss during processing and storage of food is enzymatic or non-enzymatic oxidation of the highly unsaturated carotenoid molecules. The occurrence and extent of oxidation depends on the presence of oxygen, metals, enzymes, unsaturated lipids, prooxidants, antioxidants; exposure to light; type and physical state of the carotenoids present; severity and duration of processing; packaging material; storage conditions. Thus, retention of carotenoids has been the major concern in the preparation, processing and storage of foods. However, in recent years

  10. Electron beam processing in food industry - technology and costs

    Gallien, Cl.L.; Ferradini, C.; Paquin, J.; Sadat, T.

    1985-01-01

    After nearly 40 years of research and thousands of positive experimentations, the fact that ionising radiations could be used for food preservation has been taken into account by the joint Expert Committee of the UN agencies, FAO, WHO and IAEA, who recommended this type of treatment in 1981 allowing doses up to 10 kGy. The market for irradiated food is actually small, but it could develop rapidly. National authorities who establish the regulations are becoming very active: so, in 1984, the US FDA has issued a proposed rule to regulate the commercial applications of food irradiation. It is timely to propose a MODEL that should really convince administration, food industry executives and consumers organizations that food irradiation is more than academic speculation: an industrial processing and an economical imperative. To this aim, we have defined an integrated model assembling (a) a sample product; (b) the optimal treatment conditions for this product, including a reliable dosimetry control system; and (c) a most efficient and competitive treatment unit that can suit a wide range of industrial needs. (author)

  11. Effect of Food Regulation on the Spanish Food Processing Industry: A Dynamic Productivity Analysis.

    Kapelko, Magdalena; Oude Lansink, Alfons; Stefanou, Spiro E

    2015-01-01

    This article develops the decomposition of the dynamic Luenberger productivity growth indicator into dynamic technical change, dynamic technical inefficiency change and dynamic scale inefficiency change in the dynamic directional distance function context using Data Envelopment Analysis. These results are used to investigate for the Spanish food processing industry the extent to which dynamic productivity growth and its components are affected by the introduction of the General Food Law in 2002 (Regulation (EC) No 178/2002). The empirical application uses panel data of Spanish meat, dairy, and oils and fats industries over the period 1996-2011. The results suggest that in the oils and fats industry the impact of food regulation on dynamic productivity growth is negative initially and then positive over the long run. In contrast, the opposite pattern is observed for the meat and dairy processing industries. The results further imply that firms in the meat processing and oils and fats industries face similar impacts of food safety regulation on dynamic technical change, dynamic inefficiency change and dynamic scale inefficiency change.

  12. Effect of Food Regulation on the Spanish Food Processing Industry: A Dynamic Productivity Analysis

    Kapelko, Magdalena; Lansink, Alfons Oude; Stefanou, Spiro E.

    2015-01-01

    This article develops the decomposition of the dynamic Luenberger productivity growth indicator into dynamic technical change, dynamic technical inefficiency change and dynamic scale inefficiency change in the dynamic directional distance function context using Data Envelopment Analysis. These results are used to investigate for the Spanish food processing industry the extent to which dynamic productivity growth and its components are affected by the introduction of the General Food Law in 2002 (Regulation (EC) No 178/2002). The empirical application uses panel data of Spanish meat, dairy, and oils and fats industries over the period 1996-2011. The results suggest that in the oils and fats industry the impact of food regulation on dynamic productivity growth is negative initially and then positive over the long run. In contrast, the opposite pattern is observed for the meat and dairy processing industries. The results further imply that firms in the meat processing and oils and fats industries face similar impacts of food safety regulation on dynamic technical change, dynamic inefficiency change and dynamic scale inefficiency change. PMID:26057878

  13. Consumption of Ultra-processed Foods and Obesity in Brazilian Adolescents and Adults

    da, Costa Louzada Maria Laura; Baraldi, Larissa Galastri; Steele, Euridice Martinez; Martins, Ana Paula Bortoletto; Canella, Daniela Silva; Claude-Moubarac, Jean; Levy, Renata Bertazzi; Cannon, Geoffrey; Afshin, Ashkan; Imamura, Fumiaki; Mozaffarian, Dariush; Monteiro, Carlos Augusto

    2015-01-01

    Objectives: The aim of this study was to evaluate the relationship between the consumption of ultra-processed foods and obesity indicators among Brazilian adults and adolescents. Methods: We used cross-sectional data on 30,243 individuals aged ≥ 10 years from the 2008–2009 Brazilian Dietary Survey. Food consumption data were collected through 24-h food records. We classified food items according to characteristics of food processing. Ultra-processed foods were defined as formulati...

  14. ELISA analysis of soybean trypsin inhibitors in processed foods.

    Brandon, D L; Bates, A H; Friedman, M

    1991-01-01

    Soybean proteins are widely used in human foods in a variety of forms, including infant formulas, flour, protein concentrates, protein isolates, soy sauces, textured soy fibers, and tofu. The presence of inhibitors of digestive enzymes in soy proteins impairs the nutritional quality and possibly the safety of soybeans and other legumes. Processing, based on the use of heat or fractionation of protein isolates, does not completely inactivate or remove these inhibitors, so that residual amounts of inhibitors are consumed by animals and humans. New monoclonal antibody-based immunoassays can measure low levels of the soybean Kunitz trypsin inhibitor (KTI) and the Bowman-Birk trypsin and chymotrypsin inhibitor (BBI) and the Bowman-Birk foods. The enzyme-linked immunosorbent assay (ELISA) was used to measure the inhibitor content of soy concentrates, isolates, and flours, both heated and unheated; a commercial soy infant formula; KTI and BBI with rearranged disulfide bonds; browning products derived from heat-treatment of KTI with glucose and starch; and KTI exposed to high pH. The results indicate that even low inhibitor isolates contain significant amounts of specific inhibitors. Thus, infants on soy formula consume about 10 mg of KTI plus BBI per day. The immunoassays complement the established enzymatic assays of trypsin and chymotrypsin inhibitors, and have advantages in (a) measuring low levels of inhibitors in processed foods; and (b) differentiating between the Kunitz and Bowman-Birk inhibitors. The significance of our findings for food safety are discussed.

  15. Processed and ultra-processed foods are associated with lower-quality nutrient profiles in children from Colombia.

    Cornwell, Brittany; Villamor, Eduardo; Mora-Plazas, Mercedes; Marin, Constanza; Monteiro, Carlos A; Baylin, Ana

    2018-01-01

    To determine if processed and ultra-processed foods consumed by children in Colombia are associated with lower-quality nutrition profiles than less processed foods. We obtained information on sociodemographic and anthropometric variables and dietary information through dietary records and 24 h recalls from a convenience sample of the Bogotá School Children Cohort. Foods were classified into three categories: (i) unprocessed and minimally processed foods, (ii) processed culinary ingredients and (iii) processed and ultra-processed foods. We also examined the combination of unprocessed foods and processed culinary ingredients. Representative sample of children from low- to middle-income families in Bogotá, Colombia. Children aged 5-12 years in 2011 Bogotá School Children Cohort. We found that processed and ultra-processed foods are of lower dietary quality in general. Nutrients that were lower in processed and ultra-processed foods following adjustment for total energy intake included: n-3 PUFA, vitamins A, B12, C and E, Ca and Zn. Nutrients that were higher in energy-adjusted processed and ultra-processed foods compared with unprocessed foods included: Na, sugar and trans-fatty acids, although we also found that some healthy nutrients, including folate and Fe, were higher in processed and ultra-processed foods compared with unprocessed and minimally processed foods. Processed and ultra-processed foods generally have unhealthy nutrition profiles. Our findings suggest the categorization of foods based on processing characteristics is promising for understanding the influence of food processing on children's dietary quality. More studies accounting for the type and degree of food processing are needed.

  16. QUANTIFICATION OF GENETICALLY MODIFIED MAIZE MON 810 IN PROCESSED FOODS

    Peter Siekel

    2012-12-01

    Full Text Available 800x600 Normal 0 21 false false false SK X-NONE X-NONE MicrosoftInternetExplorer4 Maize MON 810 (Zea mays L. represents the majority of genetically modified food crops. It is the only transgenic cultivar grown in the EU (European Union countries and food products with its content higher than 0.9 % must be labelled. This study was aimed at impact of food processing (temperature, pH and pressure on DNA degradation and quantification of the genetically modified maize MON 810. The transgenic DNA was quantified by the real-time polymerase chain reaction method. Processing as is high temperature (121 °C, elevated pressure (0.1 MPa and low pH 2.25 fragmented DNA. A consequence of two order difference in the species specific gene content compared to the transgenic DNA content in plant materials used has led to false negative results in the quantification of transgenic DNA. The maize containing 4.2 % of the transgene after processing appeared to be as low as 3.0 % (100 °C and 1.9 % (121 °C, 0.1 MPa. The 2.1 % amount of transgene dropped at 100 °C to 1.0 % and at 121 °C, 0.1 MPa to 0.6 %. Under such make up the DNA degradation of transgenic content showed up 2 or 3 time higher decrease a consequence of unequal gene presence. Such genes disparity is expressed as considerable decrease of transgenic content while the decrease of species specific gene content remains unnoticed. Based on our findings we conclude that high degree of processing might have led to false negative results of the transgenic constituent quantification. Determination of GMO content in processed foods may leads to incorrect statement and labelling in these cases could misleads consumers.doi:10.5219/212

  17. Effect of food processing on degradation of hexachlorocyclohexane and its isomers in milk.

    Singh, Sujatha; Nelapati, Krishnaiah

    2017-03-01

    To study the effect of different food processing techniques on the degradation of organochlorine compounds (α, β, ɣ and δ hexachlorocyclohexane isomers (HCH)) residues in both natural and fortified samples of milk. Raw milk samples are collected from the local areas of Hyderabad, India. Naturally and fortified milk samples (HCH) were subjected to various food processing techniques, pasteurization (63ºC for ½ h), sterilization (121ºC for 15 min) and boiling for 5 min and analyzed by gas chromatography with electron capture detector using quick, easy, cheap, effective, rugged and safe method for multiresidue analysis of pesticides in milk with slight modification. The final mean residual concentration of pesticide in milk after heat processing and percentage of degradation were calculated with respective treatments. Heat treatments are highly effective on reduction of mean residual concentration of HCH in milk. In which Sterilization and boiling proved to be more effective in degradation of HCH isomers.

  18. Applicability of product-driven process synthesis to separation processes in food

    Jankowiak, L.; Goot, van der A.J.; Trifunovic, O.; Bongers, P.; Boom, R.M.

    2012-01-01

    The demand for more sustainable processing in the food industry is rising but requires structured methodologies to support the fast implementation of new economic and sustainable processes. Product-driven process synthesis (PDPS) is a recently established methodology facilitating the rapid

  19. Consumer Value perceptions of food products from emerging processing technologies

    Perrea, Toula; Grunert, Klaus G; Krystallis Krontalis, Athanasios

    2015-01-01

    Through a qualitative research approach, the present paper aims to explore the range and type of ‘values’ and ‘costs’ in formulating overall Consumer Value (CV) perceptions, in association with two emerging processing technologies that at the outset are neither distinctly positive nor negative...... in the eyes of consumers, in two culturally variant contexts, namely a Western society where technology is often met with skepticism (i.e., the UK); and a non-Western society where technology plays a reassuring role regarding concerns about food safety and quality (i.e., China). Results reveal that the most......-technology counterparts, who ‘allow’ more room for cultural discrepancies to impact on their CV perceptions. Overall, findings support the view that CV perceptions in the context of food produced by means of emerging processing technologies can be successfully analyzed using a multidimensional conceptualization, where CV...

  20. Electrostatic application of antimicrobial sprays to sanitize food handling and processing surfaces for enhanced food safety

    Lyons, Shawn M; Harrison, Mark A [Food Science and Technology Department, University of Georgia, Athens, GA, 30602-2610 (United States); Law, S Edward, E-mail: edlaw@engr.uga.edu [Biological and Agricultural Engineering Department, Applied Electrostatics Laboratory www.ael.engr.uga.edu, University of Georgia, Athens, GA, 30602-4435 (United States)

    2011-06-23

    Human illnesses and deaths caused by foodborne pathogens (e.g., Salmonella enterica, Listeria monocytogenes, Escherichia coli O157:H7, etc.) are of increasing concern globally in maintaining safe food supplies. At various stages of the food production, processing and supply chain antimicrobial agents are required to sanitize contact surfaces. Additionally, during outbreaks of contagious pathogenic microorganisms (e.g., H1N1 influenza), public health requires timely decontamination of extensive surfaces within public schools, mass transit systems, etc. Prior publications verify effectiveness of air-assisted, induction-charged (AAIC) electrostatic spraying of various chemical and biological agents to protect on-farm production of food crops...typically doubling droplet deposition efficiency with concomitant increases in biological control efficacy. Within a biosafety facility this present work evaluated the AAIC electrostatic-spraying process for application of antimicrobial liquids onto various pathogen-inoculated food processing and handling surfaces as a food safety intervention strategy. Fluoroanalysis of AAIC electrostatic sprays (-7.2 mC/kg charge-to-mass ratio) showed significantly greater (p<0.05) mass of tracer active ingredient (A.I.) deposited onto target surfaces at various orientations as compared both to a similar uncharged spray nozzle (0 mC/kg) and to a conventional hydraulic-atomizing nozzle. Per unit mass of A.I. dispensed toward targets, for example, A.I. mass deposited by AAIC electrostatic sprays onto difficult to coat backsides was 6.1-times greater than for similar uncharged sprays and 29.0-times greater than for conventional hydraulic-nozzle sprays. Even at the 56% reduction in peracetic acid sanitizer A.I. dispensed by AAIC electrostatic spray applications, they achieved equal or greater CFU population reductions of Salmonella on most target orientations and materials as compared to uncharged sprays and conventional full-rate hydraulic

  1. Electrostatic application of antimicrobial sprays to sanitize food handling and processing surfaces for enhanced food safety

    Lyons, Shawn M; Harrison, Mark A; Law, S Edward

    2011-01-01

    Human illnesses and deaths caused by foodborne pathogens (e.g., Salmonella enterica, Listeria monocytogenes, Escherichia coli O157:H7, etc.) are of increasing concern globally in maintaining safe food supplies. At various stages of the food production, processing and supply chain antimicrobial agents are required to sanitize contact surfaces. Additionally, during outbreaks of contagious pathogenic microorganisms (e.g., H1N1 influenza), public health requires timely decontamination of extensive surfaces within public schools, mass transit systems, etc. Prior publications verify effectiveness of air-assisted, induction-charged (AAIC) electrostatic spraying of various chemical and biological agents to protect on-farm production of food crops...typically doubling droplet deposition efficiency with concomitant increases in biological control efficacy. Within a biosafety facility this present work evaluated the AAIC electrostatic-spraying process for application of antimicrobial liquids onto various pathogen-inoculated food processing and handling surfaces as a food safety intervention strategy. Fluoroanalysis of AAIC electrostatic sprays (-7.2 mC/kg charge-to-mass ratio) showed significantly greater (p<0.05) mass of tracer active ingredient (A.I.) deposited onto target surfaces at various orientations as compared both to a similar uncharged spray nozzle (0 mC/kg) and to a conventional hydraulic-atomizing nozzle. Per unit mass of A.I. dispensed toward targets, for example, A.I. mass deposited by AAIC electrostatic sprays onto difficult to coat backsides was 6.1-times greater than for similar uncharged sprays and 29.0-times greater than for conventional hydraulic-nozzle sprays. Even at the 56% reduction in peracetic acid sanitizer A.I. dispensed by AAIC electrostatic spray applications, they achieved equal or greater CFU population reductions of Salmonella on most target orientations and materials as compared to uncharged sprays and conventional full-rate hydraulic

  2. Guar gum: processing, properties and food applications—A Review

    Mudgil, Deepak; Barak, Sheweta; Khatkar, Bhupendar Singh

    2011-01-01

    Guar gum is a novel agrochemical processed from endosperm of cluster bean. It is largely used in the form of guar gum powder as an additive in food, pharmaceuticals, paper, textile, explosive, oil well drilling and cosmetics industry. Industrial applications of guar gum are possible because of its ability to form hydrogen bonding with water molecule. Thus, it is chiefly used as thickener and stabilizer. It is also beneficial in the control of many health problems like diabetes, bowel movement...

  3. Folates in foods: reactivity, stability during processing, and nutritional implications.

    Hawkes, J G; Villota, R

    1989-01-01

    Nutritional deficiencies are eminent at all socioeconomic levels of the world population and have created a critical need for a reevaluation of the nutritional quality of the food supply. A particular group of vitamers, collectively referred to as folates, has received a great deal of attention due to their significance in human metabolism, their prevalent deficiency worldwide, as well as their complexity of analysis. Severe folate deficiency may result in megaloblastic anemia and is generally attributed to low dietary intake, although it may also result from malabsorption. Such concerns have instigated increased interest in food-fortification programs. In order to ensure appropriate levels of nutrient fortification and optimization of food processes for maximum folate retention, it is of great importance to have a basic understanding of the kinetic behavior of individual vitamers with respect to processing parameters and various environmental conditions. This article reviews kinetic stability of folates as affected by processing conditions, discusses problems associated with current methodology for folate analyses, and integrates this information with the nutritional aspects of folates.

  4. Applying state diagrams to food processing and development

    Roos, Y.; Karel, M.

    1991-01-01

    The physical state of food components affects their properties during processing, storage, and consumption. Removal of water by evaporation or by freezing often results in formation of an amorphous state (Parks et al., 1928; Troy and Sharp, 1930; Kauzmann, 1948; Bushill et al., 1965; White and Cakebread, 1966; Slade and Levine, 1991). Amorphous foods are also produced from carbohydrate melts by rapid cooling after extrusion or in the manufacturing of hard sugar candies and coatings (Herrington and Branfield, 1984). Formation of the amorphous state and its relation to equilibrium conditions are shown in Fig. 1 [see text]. The most important change, characteristic of the amorphous state, is noticed at the glass transition temperature (Tg), which involves transition from a solid "glassy" to a liquid-like "rubbery" state. The main consequence of glass transition is an increase of molecular mobility and free volume above Tg, which may result in physical and physico-chemical deteriorative changes (White and Cakebread, 1966; Slade and Levine, 1991). We have conducted studies on phase transitions of amorphous food materials and related Tg to composition, viscosity, stickiness, collapse, recrystallization, and ice formation. We have also proposed that some diffusion-limited deteriorative reactions are controlled by the physical state in the vicinity of Tg (Roos and Karel, 1990, 1991a, b, c). The results are summarized in this article, with state diagrams based on experimental and calculated data to characterize the relevant water content, temperature, and time-dependent phenomena of amorphous food components.

  5. Toxicological evaluation of some Malaysian locally processed raw food products.

    Sharif, R; Ghazali, A R; Rajab, N F; Haron, H; Osman, F

    2008-01-01

    Malaysian locally processed raw food products are widely used as main ingredients in local cooking. Previous studies showed that these food products have a positive correlation with the incidence of cancer. The cytotoxicity effect was evaluated using MTT assay (3-(4,5-dimetil-2-thiazolil)-2,5-diphenyl-2H-tetrazolium bromide) against Chang liver cells at 2000 microg/ml following 72 h incubation. Findings showed all methanol extracts caused a tremendous drop in the percentage of cell viability at 2000 microg/ml (shrimp paste - 41.69+/-3.36%, salted fish - 37.2+/-1.06%, dried shrimp - 40.32+/-1.8%, pfood showed that shrimp paste did not comply with the protein requirement (Food Act 1983. Salt was found in every sample with the highest percentage being detected in shrimp paste which exceeded 20%. Following heavy metal analysis (arsenic, cadmium, lead and mercury), arsenic was found in every sample with dried shrimps showing the highest value as compared to the other samples (6.16 mg/kg). In conclusion, several food extracts showed cytotoxic effect but did not cause DNA damage against Chang liver cells. Salt was found as the main additive and arsenic was present in every sample, which could be the probable cause of the toxicity effects observed.

  6. Monitoring occurrence and persistence of Listeria monocytogenes in foods and food processing environments in the Republic of Ireland

    Dara eLeong

    2014-08-01

    Full Text Available Although rates of listeriosis are low in comparison to other foodborne pathogenic illnesses, listeriosis poses a significant risk to human health as the invasive form can have a mortality rate as high as 30%. Food processors, especially those who produce ready-to-eat products, need to be vigilant against Listeria monocytogenes, the causative pathogen of listeriosis, and as such, the occurrence of L. monocytogenes in food and in the food processing environment needs to be carefully monitored. To examine the prevalence and patterns of contamination in food processing facilities in Ireland, 48 food processors submitted 8 samples every 2 months from March 2013 to March 2014 to be analyzed for L. monocytogenes. No positive samples were detected for 38% of the processing facilities tested. Isolates found at the remaining 62% of facilities were characterized by serotyping and Pulsed Field Gel Electrophoresis (PFGE. A general L. monocytogenes prevalence of 4.6% was seen in all samples analyzed with similar rates seen in food and environmental samples. Differences in prevalence were seen across different food processors, food sectors, sampling months etc. and PFGE analysis allowed for the examination of contamination patterns and for the identification of several persistent strains. Seven of the food processing facilities tested showed contamination with persistent strains and evidence of bacterial transfer from the processing environment to food (the same pulsotype found in both was seen in four of the food processing facilities tested.

  7. Monitoring occurrence and persistence of Listeria monocytogenes in foods and food processing environments in the Republic of Ireland.

    Leong, Dara; Alvarez-Ordóñez, Avelino; Jordan, Kieran

    2014-01-01

    Although rates of listeriosis are low in comparison to other foodborne pathogenic illness, listeriosis poses a significant risk to human health as the invasive form can have a mortality rate as high as 30%. Food processors, especially those who produce ready-to-eat (RTE) products, need to be vigilant against Listeria monocytogenes, the causative pathogen of listeriosis, and as such, the occurrence of L. monocytogenes in food and in the food processing environment needs to be carefully monitored. To examine the prevalence and patterns of contamination in food processing facilities in Ireland, 48 food processors submitted 8 samples every 2 months from March 2013 to March 2014 to be analyzed for L. monocytogenes. No positive samples were detected at 38% of the processing facilities tested. Isolates found at the remaining 62% of facilities were characterized by serotyping and Pulsed Field Gel Electrophoresis (PFGE). A general L. monocytogenes prevalence of 4.6% was seen in all samples analyzed with similar rates seen in food and environmental samples. Differences in prevalence were seen across different food processors, food sectors, sampling months etc. and PFGE analysis allowed for the examination of contamination patterns and for the identification of several persistent strains. Seven of the food processing facilities tested showed contamination with persistent strains and evidence of bacterial transfer from the processing environment to food (the same pulsotype found in both) was seen in four of the food processing facilities tested.

  8. Occurrence of Aflatoxins in Selected Processed Foods from Pakistan

    Muhammad Ashrafuzzaman

    2012-07-01

    Full Text Available A total of 125 (ready to eat processed food samples (70 intended for infant and 55 for adult intake belonging to 20 different food categories were analyzed for aflatoxins contamination using Reverse Phase High Performance Liquid Chromatography (RP-HPLC with fluorescent detection. A solvent mixture of acetonitrile-water was used for the extraction followed by immunoaffinity clean-up to enhance sensitivity of the method. The limit of detection (LOD (0.01–0.02 ng·g−1 and limit of quantification (LOQ (0.02 ng·g−1 was established for aflatoxins based on signal to noise ratio of 3:1 and 10:1, respectively. Of the processed food samples tested, 38% were contaminated with four types of aflatoxins, i.e., AFB1 (0.02–1.24 μg·kg−1, AFB2 (0.02–0.37 μg·kg−1, AFG1 (0.25–2.7 μg·kg−1 and AFG2 (0.21–1.3 μg·kg−1. In addition, the results showed that 21% of the processed foods intended for infants contained AFB1 levels higher than the European Union permissible limits (0.1 μg·kg−1, while all of those intended for adult consumption had aflatoxin contamination levels within the permitted limits.

  9. Food safety management systems performance in African food processing companies: a review of deficiencies and possible improvement strategies

    Kussaga, J.B.; Jacxsens, L.; Tiisekwa, B.P.M.; Luning, P.A.

    2014-01-01

    This study seeks to provide insight into current deficiencies in food safety management systems (FSMS) in African food-processing companies and to identify possible strategies for improvement so as to contribute to African countries’ efforts to provide safe food to both local and international

  10. The rate of food processing in the Oystercatcher : Food intake and energy expenditure constrained by a digestive bottleneck

    Kersten, M.

    1. Whether food intake is determined by the maximum rate at which animals can collect food, or by the rate at which this food can be processed, will strongly affect the organization of their behaviour. We investigated whether the digestive system imposes a constraint on (I) instantaneous rate of

  11. Survey of potential chlorine production processes. Final report

    1979-04-01

    This report is part of the ongoing study of industrial electrochemical processes for the purpose of identifying methods of improving energy efficiencies. A computerized literature search of past and current chlorine generation methods was performed to identify basic chlorine production processes. Over 200 pertinent references are cited involving 20 separate and distinct chlorine processes. Each basic process is evaluated for its engineering and economic viability and energy efficiency. A flow diagram is provided for each basic process. Four criteria are used to determine the most promising processes: raw material availability, type and amount of energy required, by-product demand/disposal and status of development. The most promising processes are determined to be the membrane process (with and without catalytic electrodes), Kel-Chlor, Mobay (direct electrolysis of hydrogen chloride), the Shell process (catalytic oxidation of hydrogen chloride) and oxidation of ammonium chloride. Each of these processes is further studied to determine what activities may be pursued.

  12. Consumption of ultra-processed foods predicts diet quality in Canada.

    Moubarac, Jean-Claude; Batal, M; Louzada, M L; Martinez Steele, E; Monteiro, C A

    2017-01-01

    This study describes food consumption patterns in Canada according to the types of food processing using the Nova classification and investigates the association between consumption of ultra-processed foods and the nutrient profile of the diet. Dietary intakes of 33,694 individuals from the 2004 Canadian Community Health Survey aged 2 years and above were analyzed. Food and drinks were classified using Nova into unprocessed or minimally processed foods, processed culinary ingredients, processed foods and ultra-processed foods. Average consumption (total daily energy intake) and relative consumption (% of total energy intake) provided by each of the food groups were calculated. Consumption of ultra-processed foods according to sex, age, education, residential location and relative family revenue was assessed. Mean nutrient content of ultra-processed foods and non-ultra-processed foods were compared, and the average nutrient content of the overall diet across quintiles of dietary share of ultra-processed foods was measured. In 2004, 48% of calories consumed by Canadians came from ultra-processed foods. Consumption of such foods was high amongst all socioeconomic groups, and particularly in children and adolescents. As a group, ultra-processed foods were grossly nutritionally inferior to non-ultra-processed foods. After adjusting for covariates, a significant and positive relationship was found between the dietary share of ultra-processed foods and the content in carbohydrates, free sugars, total and saturated fats and energy density, while an inverse relationship was observed with the dietary content in protein, fiber, vitamins A, C, D, B6 and B12, niacin, thiamine, riboflavin, as well as zinc, iron, magnesium, calcium, phosphorus and potassium. Lowering the dietary share of ultra-processed foods and raising consumption of hand-made meals from unprocessed or minimally processed foods would substantially improve the diet quality of Canadian. Copyright © 2016

  13. Food Insecurity in Urban and Rural Areas in Central Brazil: Transition from Locally Produced Foods to Processed Items.

    Rodrigues, Livia Penna Firme; Carvalho, Raissa Costa; Maciel, Agatha; Otanasio, Polyanna Nunes; Garavello, Maria Elisa de Paula Eduardo; Nardoto, Gabriela Bielefeld

    2016-01-01

    Aiming to investigate the effect of diet and food consumption with regard to health, environment, and economy in light of nutrition ecology, we studied the dimensions of nutrition and food security in urban and rural settings in the region of Chapada dos Veadeiros, Central Brazil. We tracked diet and food consumption through carbon and nitrogen stable isotope ratios in fingernails of these inhabitants together with food intake data as a proxy for their diet patterns. We estimated household food insecurity by using the Brazilian Food Insecurity Scale. Nutrition and food insecurity was observed in both urban and rural areas, but was accentuated in rural settings. The diet pattern had high δ(13)C values in fingernails and low δ(15)N. Both urban and rural areas have diets with low diversity and relying on low-quality processed food staples at the same time that nutrition and food insecurity is quite high in the region.

  14. A multi-criteria optimization and decision-making approach for improvement of food engineering processes

    Alik Abakarov

    2013-04-01

    Full Text Available The objective of this study was to propose a multi-criteria optimization and decision-making technique to solve food engineering problems. This technique was demonstrated using experimental data obtained on osmotic dehydration of carrot cubes in a sodium chloride solution. The Aggregating Functions Approach, the Adaptive Random Search Algorithm, and the Penalty Functions Approach were used in this study to compute the initial set of non-dominated or Pareto-optimal solutions. Multiple non-linear regression analysis was performed on a set of experimental data in order to obtain particular multi-objective functions (responses, namely water loss, solute gain, rehydration ratio, three different colour criteria of rehydrated product, and sensory evaluation (organoleptic quality. Two multi-criteria decision-making approaches, the Analytic Hierarchy Process (AHP and the Tabular Method (TM, were used simultaneously to choose the best alternative among the set of non-dominated solutions. The multi-criteria optimization and decision-making technique proposed in this study can facilitate the assessment of criteria weights, giving rise to a fairer, more consistent, and adequate final compromised solution or food process. This technique can be useful to food scientists in research and education, as well as to engineers involved in the improvement of a variety of food engineering processes.

  15. Food labeling; nutrition labeling of standard menu items in restaurants and similar retail food establishments. Final rule.

    2014-12-01

    To implement the nutrition labeling provisions of the Patient Protection and Affordable Care Act of 2010 (Affordable Care Act or ACA), the Food and Drug Administration (FDA or we) is requiring disclosure of certain nutrition information for standard menu items in certain restaurants and retail food establishments. The ACA, in part, amended the Federal Food, Drug, and Cosmetic Act (the FD&C Act), among other things, to require restaurants and similar retail food establishments that are part of a chain with 20 or more locations doing business under the same name and offering for sale substantially the same menu items to provide calorie and other nutrition information for standard menu items, including food on display and self-service food. Under provisions of the ACA, restaurants and similar retail food establishments not otherwise covered by the law may elect to become subject to these Federal requirements by registering every other year with FDA. Providing accurate, clear, and consistent nutrition information, including the calorie content of foods, in restaurants and similar retail food establishments will make such nutrition information available to consumers in a direct and accessible manner to enable consumers to make informed and healthful dietary choices.

  16. Irradiation: An effective mode of processing food for safety

    Mossel, D.A.A.

    1985-01-01

    Markedly improved measures of hygiene, including those attaining generally accepted GMP, are effective in reducing the contamination rate markedly, without completely eliminating the pathogens concerned though. Attempts to identify contaminated consignments by sampling examination were demonstrated to be unsuccessful, even when linked to certification by producing countries. The only practicable solution of this serious health problem has to rely on terminal processing for safety, as introduced in the twenties in the dairy industry and somewhat later in the manufacture of egg products. Gamma irradiation (radicidation) at a level of <= 4 kGy was found to be most effective for a more than adequate degree of elimination of pathogens as judged by Risk Analysis. Radicidation for this purpose did not entail immediate flora changes or even shifts in the microbial community structure secondary to slight temperature abuse, that presented any health risk. Neither were organisms isolated that could not be identified with types customarily encountered in fresh or processed food. Consequently, health authorities and the food industry alike henceforth have means available to protect consumers against the perennial food-transmitted enteric infectious diseases by the application of low amounts of ionizing energy. They should not postpone these or similar measures of intervention unnecessarily because otherwise they risk being blamed by history for being reprehensibly over-anxious

  17. The effect of processing on veterinary residues in foods.

    Moats, W A

    1999-01-01

    Heat stability of antibiotics in foods to cooking has been determined by a variety of methods. These include heating in such liquid media as milk, water, buffers and meat extracts, and in solids such as buffered meat homogenates and various sausages. Inactivation of incurred residues in tissues and eggs was also studied. Time and temperature of heating were more easily controlled in liquid media, but results in actual meat products are more indicative of actual cooking processes. Ordinary cooking procedures for meat, even to "well-done", cannot be relied on to inactivate even the more heat sensitive compounds such as penicillins and tetracyclines. More severe heating as for canning or prolonged cooking with moist heat can inactivate the more heat sensitive compounds. The relevance to food safety is uncertain since the nature of the degradation products is unknown in most cases.

  18. Statistical problems raised by data processing of food surveys

    Lacourly, Nancy

    1974-01-01

    The methods used for the analysis of dietary habits of national populations - food surveys - have been studied. S. Lederman's linear model for the estimation of the average individual consumptions from the total family diets was in the light of a food survey carried on with 250 Roman families in 1969. An important bias in the estimates thus obtained was shown out by a simulation assuming 'housewife's dictatorship'; these assumptions should contribute to set up an unbiased model. Several techniques of multidimensional analysis were therefore used and the theoretical aspect of linear regression for some particular situations had to be investigated: quasi-colinear 'independent variables', measurements with errors, positive constraints on regression coefficients. A new survey methodology was developed taking account of the new 'Integrated Information Systems', which have incidence on all the stages of a consumption survey: organization, data collection, constitution of an information bank and data processing. (author) [fr

  19. Food-processing, packaging and irradiation/preservation

    Tripathi, Jyothi

    2017-01-01

    The present talk describes the major projects being carried out in FFACS during last few years. One of the major aims of the section is development of ready-to-cook (RTC) vegetables and ready-to-eat (RTE) fruits with improved shelf life using radiation processing. RTC vegetables and fruits (French beans, ash gourd, drumstick, pumpkin, cabbage, cauliflower and pomegranate having shelf life of 2-3 days at 10 °C) with enhanced shelf life (up to 21 days at 10°C) were developed using radiation treatment. The developed products were far superior as compared to the corresponding control samples with respect to sensory and microbial quality during the intended storage period. The findings have helped the food industry in adoption of food irradiation technology. The products developed are now being taken up by HyperCITY Retail (India) Ltd. for sale on their shelves

  20. Mashing of Rice with Barley Malt Under Nonconventional Process Conditions for Use in Food Processes

    Moe, T.; Adler-Nissen, Jens

    1994-01-01

    Non-conventional mashing conditions are relevant in the development of a lactic acid-fermented soymilk beverage where mashed rice is the source of carbohydrates for the fermentation and sweetness of the beverage. Advantages in the process layout could be achieved by mashing at higher pH and lower...... conditions when a mashing step is integrated in other food processes....

  1. Process Improvements: Aerobic Food Waste Composting at ISF Academy

    Lau, Y. K.

    2015-12-01

    ISF Academy, a school with 1500 students in Hong Kong, installed an aerobic food waste composting system in November of 2013. The system has been operational for over seven months; we will be making improvements to the system to ensure the continued operational viability and quality of the compost. As a school we are committed to reducing our carbon footprint and the amount of waste we send to the local landfill. Over an academic year we produce approximately 27 metric tons of food waste. Our system processes the food waste to compost in 14 days and the compost is used by our primary school students in a organic farming project.There are two areas of improvement: a) if the composting system becomes anaerobic, there is an odor problem that is noticed by the school community; we will be testing the use of a bio-filter to eliminate the odor problem and, b) we will be working with an equipment vendor from Australia to install an improved grease trap system. The grease and oil that is collected will be sold to a local company here in Hong Kong that processes used cooking oil for making biofuels. This system will include a two stage filtration system and a heated vessel for separating the oil from the waste water.The third project will be to evaluate biodegradable cutlery for the compositing in the system. Currently, we use a significant quantity of non-biodegradable cutlery that is then thrown away after one use. Several local HK companies are selling biodegradable cutlery, but we need to evaluate the different products to determine which ones will work with our composting system. The food waste composting project at ISF Academy demonstrates the commitment of the school community to a greener environment for HK, the above listed projects will improve the operation of the system.

  2. Enhancement of efficiency of storage and processing of food raw materials using radiation technologies

    Gracheva, A. Yu.; Zav’yalov, M. A.; Ilyukhina, N. V.; Kukhto, V. A.; Tarasyuk, V. T.; Filippovich, V. P. [All-Russia Research Institute of Preservation Technology (Russian Federation); Egorkin, A. V.; Chasovskikh, A. V. [Research Institute of Technical Physics and Automation (Russian Federation); Pavlov, Yu. S., E-mail: rad05@bk.ru [Frumkin Institute of Physical Chemistry and Electrochemistry, Russian Academy of Sciences (Russian Federation); Prokopenko, A. V., E-mail: pav14@mail.ru [National Research Nuclear University (Moscow Engineering Physics Institute) (Russian Federation); Strokova, N. E. [Moscow State University (Russian Federation); Artem’ev, S. A. [Russian Research Institute of Baking Industry (Russian Federation); Polyakova, S. P. [Russian Research Institute of Confectionery Industry (Russian Federation)

    2016-12-15

    The work is dedicated to improvement of efficiency of storage and processing of food raw materials using radiation technologies. International practice of radiation processing of food raw materials is presented and an increase in the consumption of irradiated food products is shown. The prospects of using radiation technologies for the processing of food products in Russia are discussed. The results of studies of radiation effects on various food products and packaging film by γ radiation and accelerated electrons are presented.

  3. Enhancement of efficiency of storage and processing of food raw materials using radiation technologies

    Gracheva, A. Yu.; Zav’yalov, M. A.; Ilyukhina, N. V.; Kukhto, V. A.; Tarasyuk, V. T.; Filippovich, V. P.; Egorkin, A. V.; Chasovskikh, A. V.; Pavlov, Yu. S.; Prokopenko, A. V.; Strokova, N. E.; Artem’ev, S. A.; Polyakova, S. P.

    2016-01-01

    The work is dedicated to improvement of efficiency of storage and processing of food raw materials using radiation technologies. International practice of radiation processing of food raw materials is presented and an increase in the consumption of irradiated food products is shown. The prospects of using radiation technologies for the processing of food products in Russia are discussed. The results of studies of radiation effects on various food products and packaging film by γ radiation and accelerated electrons are presented.

  4. Religious Belief as a Determinant Factor of Food Processing in Ilorin ...

    Religion has a strong connection with food processing and whether Christians or Muslims, food is an integral part of religious functions. In Islam, halal (lawful) is no longer simply a matter of extra religious regulations on food and food processing; it has become a huge and rapidly expanding global market that includes and ...

  5. Microstructure, texture and oral processing: New ways to reduce sugar and salt in foods

    Stieger, M.A.; Velde, van de F.

    2013-01-01

    Food oral processing as the bridge between food texture, microstructure and sensory perception has gained enormous interest in the last decade. This review provides an overview of the role of the microstructure of soft- and semi-solid foods in food oral processing and sensory perception. Phase

  6. 21 CFR 133.174 - Pasteurized process cheese food with fruits, vegetables, or meats.

    2010-04-01

    ..., vegetables, or meats. 133.174 Section 133.174 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF... with fruits, vegetables, or meats. (a) Pasteurized process cheese food with fruits, vegetables, or... fruits, vegetables, or meats is “Pasteurized process cheese food with ___”, the blank being filled in...

  7. Separation, fractionation, concentration and drying of food products: Final report, March 4, 1987--March 31, 1988

    Merlo, C.A.; Rose, W.W.; Pedersen, L.D.; Brewbaker, P.L.

    1988-03-01

    This project studied energy efficient processes for separation, fractionation, concentration, drying, and recombination of food products, in order to reduce energy requirements for processing, preservation, and transportation. The project had three phases. In the laboratory-scale phase, results of which are summarized in this report, tomato puree was separated by three methods: conventional vacuum filtration, centrifugation, and crossflow microfiltration to produce pulp and serum. Three methods of recombination were examined: homogenizing, stomacher blending, and static (in-line) mixing. Satisfactory recombined purees were obtained. In addition, after centrifugation, the pulp was rinsed producing rinsed-pulp, and the rinse water was added to the serum producing rinse/serum. The rinse/serum was concentrated by evaporation. This was recombined with the rinsed-pulp and water producing satisfactory puree. 11 refs., 18 figs., 18 tabs.

  8. The Ideal Criteria of Supplier Selection for SMEs Food Processing Industry

    Ramlan Rohaizan; Engku Abu Bakar Engku Muhammad Nazri; Mahmud Fatimah; Ng Hooi Keng

    2016-01-01

    Selection of good supplier is important to determine the performance and profitability of SMEs food processing industry. The lack of managerial capability on supplier selection in SMEs food processing industry affects the competitiveness of SMEs food processing industry. This research aims to determine the ideal criteria of supplier for food processing industry using Analytical Hierarchy Process (AHP). The research was carried out in a quantitative method by distributing questionnaires to 50 ...

  9. Dynamic process model of a plutonium oxalate precipitator. Final report

    Miller, C.L.; Hammelman, J.E.; Borgonovi, G.M.

    1977-11-01

    In support of LLL material safeguards program, a dynamic process model was developed which simulates the performance of a plutonium (IV) oxalate precipitator. The plutonium oxalate precipitator is a component in the plutonium oxalate process for making plutonium oxide powder from plutonium nitrate. The model is based on state-of-the-art crystallization descriptive equations, the parameters of which are quantified through the use of batch experimental data. The dynamic model predicts performance very similar to general Hanford oxalate process experience. The utilization of such a process model in an actual plant operation could promote both process control and material safeguards control by serving as a baseline predictor which could give early warning of process upsets or material diversion. The model has been incorporated into a FORTRAN computer program and is also compatible with the DYNSYS 2 computer code which is being used at LLL for process modeling efforts.

  10. Dynamic process model of a plutonium oxalate precipitator. Final report

    Miller, C.L.; Hammelman, J.E.; Borgonovi, G.M.

    1977-11-01

    In support of LLL material safeguards program, a dynamic process model was developed which simulates the performance of a plutonium (IV) oxalate precipitator. The plutonium oxalate precipitator is a component in the plutonium oxalate process for making plutonium oxide powder from plutonium nitrate. The model is based on state-of-the-art crystallization descriptive equations, the parameters of which are quantified through the use of batch experimental data. The dynamic model predicts performance very similar to general Hanford oxalate process experience. The utilization of such a process model in an actual plant operation could promote both process control and material safeguards control by serving as a baseline predictor which could give early warning of process upsets or material diversion. The model has been incorporated into a FORTRAN computer program and is also compatible with the DYNSYS 2 computer code which is being used at LLL for process modeling efforts

  11. Children's Food Security and Intakes from School Meals. Final Report. Contractor and Cooperator Report No. 61

    Potamites, Elizabeth; Gordon, Anne

    2010-01-01

    Using 2005 data from the U.S. Department of Agriculture's Third School Nutrition Dietary Assessment survey, this study examines the contribution of school meals to the food and nutrient intake of children in food-secure, marginally secure, and food-insecure households. The study finds that children from food-insecure and marginally secure…

  12. 14 CFR 11.31 - How does FAA process direct final rules?

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false How does FAA process direct final rules? 11... PROCEDURAL RULES GENERAL RULEMAKING PROCEDURES Rulemaking Procedures General § 11.31 How does FAA process direct final rules? (a) A direct final rule will take effect on a specified date unless FAA receives an...

  13. Ultra-processed foods and the nutritional dietary profile in Brazil

    Louzada, Maria Laura da Costa; Martins, Ana Paula Bortoletto; Canella, Daniela Silva; Baraldi, Larissa Galastri; Levy, Renata Bertazzi; Claro, Rafael Moreira; Moubarac, Jean-Claude; Cannon, Geoffrey; Monteiro, Carlos Augusto

    2015-01-01

    OBJECTIVE To assess the impact of consuming ultra-processed foods on the nutritional dietary profile in Brazil. METHODS Cross-sectional study conducted with data from the module on individual food consumption from the 2008-2009 Pesquisa de Orçamentos Familiares (POF – Brazilian Family Budgets Survey). The sample, which represented the section of the Brazilian population aged 10 years or over, involved 32,898 individuals. Food consumption was evaluated by two 24-hour food records. The consumed food items were classified into three groups: natural or minimally processed, including culinary preparations with these foods used as a base; processed; and ultra-processed. RESULTS The average daily energy consumption per capita was 1,866 kcal, with 69.5% being provided by natural or minimally processed foods, 9.0% by processed foods and 21.5% by ultra-processed food. The nutritional profile of the fraction of ultra-processed food consumption showed higher energy density, higher overall fat content, higher saturated and trans fat, higher levels of free sugar and less fiber, protein, sodium and potassium, when compared to the fraction of consumption related to natural or minimally processed foods. Ultra-processed foods presented generally unfavorable characteristics when compared to processed foods. Greater inclusion of ultra-processed foods in the diet resulted in a general deterioration in the dietary nutritional profile. The indicators of the nutritional dietary profile of Brazilians who consumed less ultra-processed foods, with the exception of sodium, are the stratum of the population closer to international recommendations for a healthy diet. CONCLUSIONS The results from this study highlight the damage to health that is arising based on the observed trend in Brazil of replacing traditional meals, based on natural or minimally processed foods, with ultra-processed foods. These results also support the recommendation of avoiding the consumption of these kinds of foods

  14. Ultra-processed foods and the nutritional dietary profile in Brazil.

    Costa Louzada, Maria Laura da; Martins, Ana Paula Bortoletto; Canella, Daniela Silva; Baraldi, Larissa Galastri; Levy, Renata Bertazzi; Claro, Rafael Moreira; Moubarac, Jean-Claude; Cannon, Geoffrey; Monteiro, Carlos Augusto

    2015-01-01

    OBJECTIVE To assess the impact of consuming ultra-processed foods on the nutritional dietary profile in Brazil. METHODS Cross-sectional study conducted with data from the module on individual food consumption from the 2008-2009 Pesquisa de Orçamentos Familiares (POF - Brazilian Family Budgets Survey). The sample, which represented the section of the Brazilian population aged 10 years or over, involved 32,898 individuals. Food consumption was evaluated by two 24-hour food records. The consumed food items were classified into three groups: natural or minimally processed, including culinary preparations with these foods used as a base; processed; and ultra-processed. RESULTS The average daily energy consumption per capita was 1,866 kcal, with 69.5% being provided by natural or minimally processed foods, 9.0% by processed foods and 21.5% by ultra-processed food. The nutritional profile of the fraction of ultra-processed food consumption showed higher energy density, higher overall fat content, higher saturated and trans fat, higher levels of free sugar and less fiber, protein, sodium and potassium, when compared to the fraction of consumption related to natural or minimally processed foods. Ultra-processed foods presented generally unfavorable characteristics when compared to processed foods. Greater inclusion of ultra-processed foods in the diet resulted in a general deterioration in the dietary nutritional profile. The indicators of the nutritional dietary profile of Brazilians who consumed less ultra-processed foods, with the exception of sodium, are the stratum of the population closer to international recommendations for a healthy diet. CONCLUSIONS The results from this study highlight the damage to health that is arising based on the observed trend in Brazil of replacing traditional meals, based on natural or minimally processed foods, with ultra-processed foods. These results also support the recommendation of avoiding the consumption of these kinds of foods.

  15. Thermodynamic analysis applied to a food-processing plant

    Ho, J C; Chandratilleke, T T

    1987-01-01

    Two production lines of a multi-product, food-processing plant are selected for energy auditing and analysis. Thermodynamic analysis showed that the first-law and second-law efficiencies are 81.5% and 26.1% for the instant-noodles line and 23.6% and 7.9% for the malt-beverage line. These efficiency values are dictated primarily by the major energy-consuming sub-processes of each production line. Improvements in both first-law and second-law efficiencies are possible for the plants if the use of steam for heating is replaced by gaseous or liquid fuels, the steam ejectors for creating vacuum are replaced by a mechanical pump, and employing the cooler surroundings to assist in the cooling process.

  16. Degree of food processing of household acquisition patterns in a Brazilian urban area is related to food buying preferences and perceived food environment.

    Vedovato, G M; Trude, A C B; Kharmats, A Y; Martins, P A

    2015-04-01

    This cross-sectional study examined the association between local food environment and consumers' acquisition of ultra-processed food. Households were randomly selected from 36 census tracts in Santos City, Brazil. Mothers, of varying economic status, who had children ages 10 or younger (n = 538) were interviewed concerning: their household food acquisition of 31 groups of food and beverages, perceptions of local food environment, food sources destinations, means of transportation used, and socioeconomic status. Food acquisition patterns were classified based on the degree of industrial food processing. Logistic regression models were fitted to assess the association between consumer behaviors and acquisition patterns. The large variety of fresh produce available in supermarkets was significantly related to lower odds of ultra-processed food purchases. After adjusting for sociodemographic characteristics, higher odds for minimally-processed food acquisition were associated with: frequent use of specialized markets to purchase fruits and vegetables (OR 1.89, 95% CI 1.01-2.34), the habit of walking to buy food (OR 1.58, 95% CI 1.08-2.30), and perceived availability of fresh produce in participants' neighborhood (OR 1.58, 95% CI 1.08-2.30). Acquisition of ultra-processed food was positively associated with the use of taxis as principal means of transportation to food sources (OR 2.35, 95% CI 1.08-5.13), and negatively associated with perceived availability of a variety of fruits and vegetables in the neighborhood (OR 0.57, 95% CI 0.37-0.88). The results suggest that interventions aiming to promote acquisition of less processed food in settings similar to Santos, may be most effective if they focus on increasing the number of specialized fresh food markets in local neighborhood areas, improve residents' awareness of these markets' availability, and provide appropriate transportation. Copyright © 2014 Elsevier Ltd. All rights reserved.

  17. Development of food preservation and processing techniques by radiation

    Byun, Myung Woo; Yook, Hong Sun; Lee, Ju Woon and others

    2000-03-01

    Development of food preservation and processing techniques by radiation was performed. Gamm irradiation at 5 kGy completely eliminated pathogenic bacteria in pork and chicken meats. Gamma irradiation at such doses and subsequent storage at less than 4 deg C could ensure hygienic quality and prolong the microbiological shelf-life resulting from the reduction of spoilage microorganisms. Pork loin ham with desirable color was also developed without using of sodium nitrite that is known as a carcinogen. Safety tests of gamma-irradiated meats in areas such as genotoxicity, acute toxicity, four-week oral toxicity, rat hepatocarcinogenesis and the antioxidative defense system, were not affected by gamma irradiation. Gamma irradiation at about 1 kGy completely eliminated the parasites in foods and drinking water. In the study of quarantine treatment of apple and pear for export by gamma irradiation, current fumigation(MBr) was perfect in its disinfesting capability, but it caused detrimental effects on the physical quality of apple and pear. However, irradiation doses at 1-3 kGy was suitable for controlling pests and did not induce any significant changes in the quality of the products. The result of the survey to assess the public understanding indicated that the irradiated food had somewhat negative impression to general public. Therefore, it is necessary to establish a public education and information program by using mass communication and by constructing communication system to obtain the enhanced impression from the general public

  18. Development of food preservation and processing techniques by radiation

    Byun, Myung Woo; Yook, Hong Sun; Lee, Ju Woon and others

    2000-03-01

    Development of food preservation and processing techniques by radiation was performed. Gamm irradiation at 5 kGy completely eliminated pathogenic bacteria in pork and chicken meats. Gamma irradiation at such doses and subsequent storage at less than 4 deg C could ensure hygienic quality and prolong the microbiological shelf-life resulting from the reduction of spoilage microorganisms. Pork loin ham with desirable color was also developed without using of sodium nitrite that is known as a carcinogen. Safety tests of gamma-irradiated meats in areas such as genotoxicity, acute toxicity, four-week oral toxicity, rat hepatocarcinogenesis and the antioxidative defense system, were not affected by gamma irradiation. Gamma irradiation at about 1 kGy completely eliminated the parasites in foods and drinking water. In the study of quarantine treatment of apple and pear for export by gamma irradiation, current fumigation(MBr) was perfect in its disinfesting capability, but it caused detrimental effects on the physical quality of apple and pear. However, irradiation doses at 1-3 kGy was suitable for controlling pests and did not induce any significant changes in the quality of the products. The result of the survey to assess the public understanding indicated that the irradiated food had somewhat negative impression to general public. Therefore, it is necessary to establish a public education and information program by using mass communication and by constructing communication system to obtain the enhanced impression from the general public.

  19. 242-A Campaign 99-1 process control plan; FINAL

    LE, E.Q.

    1999-01-01

    242-A Evaporator 99-1 will process approximately one million gallons of waste from tank 102-AW in June 1999. The process control Plan provides a general description of activities, which will occur during 242-A Evaporator Campaign 99-1 and to document analyses conducted to demonstrate that 102-AW waste is acceptable for processing. Predict is a registered trademark of Risk Decisions England Corporation, United Kingdom

  20. COSTS AND PROFITABILITY IN FOOD PROCESSING: PASTRY TYPE UNITS

    DUMITRANA MIHAELA

    2013-08-01

    Full Text Available For each company, profitability, products quality and customer satisfaction are the most importanttargets. To attaint these targets, managers need to know all about costs that are used in decision making. Whatkind of costs? How these costs are calculated for a specific sector such as food processing? These are only a fewquestions with answers in our paper. We consider that a case study for this sector may be relevant for all peoplethat are interested to increase the profitability of this specific activity sector.

  1. Cogeneration handbook for the food processing industry. [Contains glossary

    Eakin, D.E.; Fassbender, L.L.; Garrett-Price, B.A.; Moore, N.L.; Fasbender, A.G.; Gorges, H.A.

    1984-03-01

    The decision of whether to cogenerate involves several considerations, including technical, economic, environmental, legal, and regulatory issues. Each of these issues is addressed separately in this handbook. In addition, a chapter is included on preparing a three-phase work statement, which is needed to guide the design of a cogeneration system. In addition, an annotated bibliography and a glossary of terminology are provided. Appendix A provides an energy-use profile of the food processing industry. Appendices B through O provide specific information that will be called out in subsequent chapters.

  2. EPR-dosimetry for radiation processing of food

    Peimel-Stuglik, Z.; Fabisiak, S.

    2002-01-01

    The usefulness of two, easy accessible alanine-polymer dosimeters to low (D ≤ 10 kGy) ionizing radiation dose measurements, were investigated. In both cases (ALANPOL from IChTJ and foil dosemeters from Gamma Service, Radeberg, Germany) the results were positive. EPR-alanine method based on the described dosimeters meets the requirements to use it in radiation processing of food. Thin foil dosemeters from Gamma Service are recommended mainly for dose distribution measurements. ALANPOL - for routine use. The advantage of ALANPOL is lower price, higher sensitivity and high resistance to unfavourable environmental conditions, including water. (author)

  3. Powder Metallurgy Reconditioning of Food and Processing Equipment Components

    Nafikov, M. Z.; Aipov, R. S.; Konnov, A. Yu.

    2017-12-01

    A powder metallurgy method is developed to recondition the worn surfaces of food and processing equipment components. A combined additive is composed to minimize the powder losses in sintering. A technique is constructed to determine the powder consumption as a function of the required metallic coating thickness. A rapid method is developed to determine the porosity of the coating. The proposed technology is used to fabricate a wear-resistant defectless metallic coating with favorable residual stresses, and the adhesive strength of this coating is equal to the strength of the base metal.

  4. Is the degree of food processing and convenience linked with the nutritional quality of foods purchased by US households?

    Poti, Jennifer M; Mendez, Michelle A; Ng, Shu Wen; Popkin, Barry M

    2015-06-01

    "Processed foods" are defined as any foods other than raw agricultural commodities and can be categorized by the extent of changes occurring in foods as a result of processing. Conclusions about the association between the degree of food processing and nutritional quality are discrepant. We aimed to determine 2000-2012 trends in the contribution of processed and convenience food categories to purchases by US households and to compare saturated fat, sugar, and sodium content of purchases across levels of processing and convenience. We analyzed purchases of consumer packaged goods for 157,142 households from the 2000-2012 Homescan Panel. We explicitly defined categories for classifying products by degree of industrial processing and separately by convenience of preparation. We classified >1.2 million products through use of barcode-specific descriptions and ingredient lists. Median saturated fat, sugar, and sodium content and the likelihood that purchases exceeded maximum daily intake recommendations for these components were compared across levels of processing or convenience by using quantile and logistic regression. More than three-fourths of energy in purchases by US households came from moderately (15.9%) and highly processed (61.0%) foods and beverages in 2012 (939 kcal/d per capita). Trends between 2000 and 2012 were stable. When classifying foods by convenience, ready-to-eat (68.1%) and ready-to-heat (15.2%) products supplied the majority of energy in purchases. The adjusted proportion of household-level food purchases exceeding 10% kcal from saturated fat, 15% kcal from sugar, and 2400 mg sodium/2000 kcal simultaneously was significantly higher for highly processed (60.4%) and ready-to-eat (27.1%) food purchases than for purchases of less-processed foods (5.6%) or foods requiring cooking/preparation (4.9%). Highly processed food purchases are a dominant, unshifting part of US purchasing patterns, but highly processed foods may have higher saturated fat

  5. Knowledge and Processes in Design. DPS Final Report.

    Pirolli, Peter

    Four papers from a project concerning information-processing characterizations of the knowledge and processes involved in design are presented. The project collected and analyzed verbal protocols from instructional designers, architects, and mechanical engineers. A framework was developed for characterizing the problem spaces of design that…

  6. Membrane processing technology in the food industry: food processing, wastewater treatment, and effects on physical, microbiological, organoleptic, and nutritional properties of foods.

    Kotsanopoulos, Konstantinos V; Arvanitoyannis, Ioannis S

    2015-01-01

    Membrane processing technology (MPT) is increasingly used nowadays in a wide range of applications (demineralization, desalination, stabilization, separation, deacidification, reduction of microbial load, purification, etc.) in food industries. The most frequently applied techniques are electrodialysis (ED), reverse osmosis (RO), nanofiltration (NF), ultrafiltration (UF), and microfiltration (MF). Several membrane characteristics, such as pore size, flow properties, and the applied hydraulic pressure mainly determine membranes' potential uses. In this review paper the basic membrane techniques, their potential applications in a large number of fields and products towards the food industry, the main advantages and disadvantages of these methods, fouling phenomena as well as their effects on the organoleptic, qualitative, and nutritional value of foods are synoptically described. Some representative examples of traditional and modern membrane applications both in tabular and figural form are also provided.

  7. Food irradiation

    Roberts, P.B.

    1997-01-01

    Food can be provided with extra beneficial properties by physical processing. These benefits include a reduced possibility of food poisoning, or an increased life of the food. We are familiar with pasteurisation of milk, drying of vegetables, and canning of fruit. These physical processes work because the food absorbs energy during treatment which brings about the changes needed. The energy absorbed in these examples is heat energy. Food irradiation is a less familiar process. It produces similar benefits to other processes and it can sometimes be applied with additional advantages over conventional processing. For example, because irradiation causes little heating, foods may look and taste more natural. Also, treatment can take place with the food in its final plastic wrappers, reducing the risk of re-contamination. (author). 1 ref., 4 figs., 1 tab

  8. Survey of electrochemical metal winning processes. Final report

    Vaaler, L.E.

    1979-03-01

    The subject program was undertaken to find electrometallurgical technology that could be developed into energy saving commercial metal winning processes. Metals whose current production processes consume significant energy (excepting copper and aluminum) are magnesium, zinc, lead, chromium, manganese, sodium, and titanium. The technology of these metals, with the exception of titanium, was reviewed. Growth of titanium demand has been too small to justify the installation of an electrolyte process that has been developed. This fact and the uncertainty of estimates of future demand dissuaded us from reviewing titanium technology. Opportunities for developing energy saving processes were found for magnesium, zinc, lead, and sodium. Costs for R and D and demonstration plants have been estimated. It appeared that electrolytic methods for chromium and manganese cannot compete energywise or economically with the pyrometallurgical methods of producing the ferroalloys, which are satisfactory for most uses of chromium and manganese.

  9. FINAL PROCESS DEPENDENT DIMENSIONAL CHANGES OF DOUBLE KNIT FABRICS

    Vedat ÖZYAZGAN

    2012-01-01

    Full Text Available In this paper Ne 30/1 cotton yarn obtained by using pure cotton fibers is employed. 1x1, 2x1 and 3x1 Rib fabrics were knitted with yarns at different gauges. During the knitting process, the tension was kept constant. In order to investigate the relaxation on the knitting process fabric samples were treated using three relaxation processes; dry, wet and full respectively. After each relaxation process, stitches dimensions were measured. As a result of these measurements, it is observed that as the relaxation increases the stitches length decreases while the stitches width increases. In rib knitting, As the fabric stretches increases the stitch length increases. As a result it is observed that as the stitch length increases, the width of the stitches increases linearly. In all rib fabrics, increase in the stitch density leads to an increase in the weight of the fabric.

  10. Process applications for geothermal energy resources. Final report

    Mikic, B.B.; Meal, H.C.; Packer, M.B.; Guillamon-Duch, H.

    1981-08-01

    The principal goal of the program was to demonstrate economical and technical suitability of geothermal energy as a source of industrial process heat through a cooperative program with industrial firms. To accomplish that: a critical literature survey in the field was performed; a workshop with the paper and pulp industry representatives was organized; and four parallel methods dealing with technical and economical details of geothermal energy use as a source of industrial process heat were developed.

  11. Mathematical modeling of the voloxidation process. Final report

    Stanford, T.G.

    1979-06-01

    A mathematical model of the voloxidation process, a head-end reprocessing step for the removal of volatile fission products from spent nuclear fuel, has been developed. Three types of voloxidizer operation have been considered; co-current operation in which the gas and solid streams flow in the same direction, countercurrent operation in which the gas and solid streams flow in opposite directions, and semi-batch operation in which the gas stream passes through the reactor while the solids remain in it and are processed batch wise. Because of the complexity of the physical ahd chemical processes which occur during the voloxidation process and the lack of currently available kinetic data, a global kinetic model has been adapted for this study. Test cases for each mode of operation have been simulated using representative values of the model parameters. To process 714 kgm/day of spent nuclear fuel, using an oxidizing atmosphere containing 20 mole percent oxygen, it was found that a reactor 0.7 m in diameter and 2.49 m in length would be required for both cocurrent and countercurrent modes of operation while for semibatch operation a 0.3 m 3 reactor and an 88200 sec batch processing time would be required

  12. Is the degree of food processing and convenience linked with the nutritional quality of foods purchased by US households?1234

    Mendez, Michelle A

    2015-01-01

    Background: “Processed foods” are defined as any foods other than raw agricultural commodities and can be categorized by the extent of changes occurring in foods as a result of processing. Conclusions about the association between the degree of food processing and nutritional quality are discrepant. Objective: We aimed to determine 2000–2012 trends in the contribution of processed and convenience food categories to purchases by US households and to compare saturated fat, sugar, and sodium content of purchases across levels of processing and convenience. Design: We analyzed purchases of consumer packaged goods for 157,142 households from the 2000–2012 Homescan Panel. We explicitly defined categories for classifying products by degree of industrial processing and separately by convenience of preparation. We classified >1.2 million products through use of barcode-specific descriptions and ingredient lists. Median saturated fat, sugar, and sodium content and the likelihood that purchases exceeded maximum daily intake recommendations for these components were compared across levels of processing or convenience by using quantile and logistic regression. Results: More than three-fourths of energy in purchases by US households came from moderately (15.9%) and highly processed (61.0%) foods and beverages in 2012 (939 kcal/d per capita). Trends between 2000 and 2012 were stable. When classifying foods by convenience, ready-to-eat (68.1%) and ready-to-heat (15.2%) products supplied the majority of energy in purchases. The adjusted proportion of household-level food purchases exceeding 10% kcal from saturated fat, 15% kcal from sugar, and 2400 mg sodium/2000 kcal simultaneously was significantly higher for highly processed (60.4%) and ready-to-eat (27.1%) food purchases than for purchases of less-processed foods (5.6%) or foods requiring cooking/preparation (4.9%). Conclusions: Highly processed food purchases are a dominant, unshifting part of US purchasing patterns

  13. The pilot plant for electron beam food processing

    Migdal, W.; Kosmal, W.; Malec-Czechowska, K.; Maciszewski, W.

    1992-01-01

    In the frames of the national programme on the application of irradiation for food preservation and hygienization an experimental plant for electron beam processing has been established in INCT. The pilot plant has been constructed inside an old fort what decreases significantly the cost of the investment. The pilot plants is equipped with a small research accelerator Pilot (10 MeV, 1 kW) and an industrial unit Elektronika (10 MeV, 10 kW). This allows both laboratory and full technological scale testing of the elaborated process to be conducted. The industrial unit is being equipped with e-/X conversion target, for high density products irradiation. On the basis of the research there were performed at different scientific institutions in Poland, health authorities have issued permissions for permanent treatment of spices, garlic, onions and temporary permissions for mushrooms, and potatoes. Dosimetric methods have been elaborated for the routine use at the plant. In the INCT laboratory methods for the control of e-/X treated food have been established. (author). 9 refs, 5 figs, 1 tab

  14. The pilot plant for electron beam food processing

    Migdal, W.; Walis, L.; Chmielewski, A. G.

    1993-07-01

    In the frames of the national programme on the application of irradiation for food preservation and hygienization an experimental plant for electron beam processing has been established in INCT. The pilot plant has been constructed inside an old fort what decreases significantly the cost of the investment. The pilot plant is equipped with a small research accelerator Pilot (10 MeV, 1 kW) and an industrial unit Elektronika (10 MeV, 10 kW). This allows both laboratory and full technological scale testing of the elaborated process to be conducted. The industrial unit is being equipped with e-/X conversion target, for high density products irradiation. On the basis of the research there were performed at different scientific institutions in Poland, health authorities have issued permissions for permanent treatment of spices, garlic, onions and temporary permissions for mushrooms, and potatoes. Dosimetric methods have been elaborated for the routine use at the plant. In the INCT laboratory methods for the control of e-/X treated food have been established.

  15. Food processing using electrons and X-rays

    Clouston, J.G.

    1985-01-01

    The ionizing radiation which will be used as process energy for the preservation of food, will be limited to high energy electrons (less than 10 MeV), X-rays (less than 5 MeV) and gamma rays emitted by cobalt-60 (1.17;1.33 MeV) and cesium -137 (0.663 MeV). When a foodstuff is irradiated with any of these radiations absorption of the radiant energy will initiate a variety of reactions between its atomic and molecular constituents causing permanent chemical, physical and biological changes. This paper focusses on radiation processing using electron or X-ray generators in the range 2 to 10 MeV

  16. How the Food Processing Industry Is Diversifying Rural Minnesota. JSRI Working Paper.

    Fennelly, Katherine; Leitner, Helga

    The diversification of rural Minnesota is largely the result of the restructuring of the food processing industry and its recruitment of low-wage laborers. The relocation and expansion of food processing plants into rural areas of Minnesota creates a demand for low-wage labor that can not be met locally. Food processing businesses attract…

  17. The evaporation of viscose process liquors: Final report

    Thornton, R

    1984-01-01

    A program of work aimed at producing designs for an energy efficient process for the evaporation of water from viscose process liquors has been completed. The process uses mechanical vapor recompression in conjunction with a thin plastic heat transfer surface. A bench laboratory evaporation rig was built to prove the technical viability of the process. This was followed by the construction of a research plant at a viscose production site. The capacity of this plant was 100 to 150 kg/h of water evaporated. The construction and operation of a plastic heat exchanger with thin walled plastic tubes was achieved with considerable success. The lining of the concrete containment vessel proved more difficult, and the technique employed may not be the best for commercial units. Heat transfer coefficients of up to 550 Wm/sup -2/ K/sup -1/ were measured on the research plant. These agreed well with results obtained from a mathematical model developed for the process. An optimum design for a commercial unit has been costed and the financial parameters determined. Courtaulds considers that the construction of a demonstration plant is justified. 3 refs., 8 figs.

  18. Chemical-cleaning process evaluation: Westinghouse steam generators. Final report

    Cleary, W.F.; Gockley, G.B.

    1983-04-01

    The Steam Generator Owners Group (SGOG)/Electric Power Research Institute (EPRI) Steam Generator Secondary Side Chemical Cleaning Program, under develpment since 1978, has resulted in a generic process for the removal of accumulated corrosion products and tube deposits in the tube support plate crevices. The SGOG/EPRI Project S150-3 was established to obtain an evaluation of the generic process in regard to its applicability to Westinghouse steam generators. The results of the evaluation form the basis for recommendations for transferring the generic process to a plant specific application and identify chemical cleaning corrosion guidelines for the materials in Westinghouse Steam Generators. The results of the evaluation, recommendations for plant-specific applications and corrosion guidelines for chemical cleaning are presented in this report

  19. A novel process for methanol synthesis. Final report

    Tierney, J.W.; Wender, I.

    1994-01-25

    The use of methanol (MeOH) as a fuel additive and in MTBE production has renewed interest in the search for improved MeOH processes. Commercial processes are characterized by high pressures and temperatures with low per pass conversion (10--12%). Efforts are underway to find improved MeOH synthesis processes. A slurry phase ``concurrent`` synthesis of MeOH/methyl formate (MeF) which operates under relatively mild conditions (100{degrees}C lower than present commercial processes) was the subject of investigation in this work. Evidence for a reaction scheme involving the carbonylation of MeOH to MeF followed by the hydrogenolysis of MeF to two molecules of MeOH -- the net result being the reaction of H{sub 2} with CO to give MeOH via MeF, is presented. Up to 90% per pass conversion and 98% selectivity to methanol at rates comparable to commercial processes have been obtained in spite of the presence of as much as 10,000 ppM CO{sub 2} and 3000 ppM H{sub 2}O in the gas and liquid respectively. The effect of process parameters such as temperature, pressure, H{sub 2}/CO ratio in the reactor, flow rate and catalyst loading were also investigated. The use of temperatures above 170{degrees}C at a pressure of 50 atm results in MeF being the limiting reactant. Small amounts of CH{sub 4} are also formed. Significant MeOH synthesis rates at a pressure in the range of 40--50 atm makes possible the elimination of an upstream shift reactor and the use of an air-blown syngas generator. The nature of the catalysts was studied and correlated with the behavior of the various species in the concurrent synthesis.

  20. Recent trends and developments in infrared heating in food processing.

    Rastogi, Navin K

    2012-01-01

    Fruit processing and preservation technologies must keep fresh-like characteristics while providing an acceptable and convenient shelf life as well as assuring safety and nutritional value. Processing technologies include a wide range of methodologies to inactivate microorganisms, improve quality and stability, and preserve and minimize changes of fruit fresh-like characteristics. Infrared (IR) heating offers many advantages over conventional heating under similar conditions, which include reduced heating time, uniform heating, reduced quality losses, versatile, simple and compact equipment, and significant energy saving. The integration of IR with other matured processing operations such as blanching, dehydration, freeze-dehydration, thawing, roasting, baking, cooking has been shown to open up new processing options. Combinations of IR heating with microwave heating and other common conductive and convective modes of heating have been gaining momentum because of increased energy throughput. A number of publications and patents have demonstrated novel and diverse uses of this technology. This review aims at identifying the opportunities and challenges associated with this technology. The effect of IR on food quality attributes is also discussed. The types of equipment commonly used for IR processing have also been summarized.

  1. New Process for Grain Refinement of Aluminum. Final Report

    Dr. Joseph A. Megy

    2000-09-22

    A new method of grain refining aluminum involving in-situ formation of boride nuclei in molten aluminum just prior to casting has been developed in the subject DOE program over the last thirty months by a team consisting of JDC, Inc., Alcoa Technical Center, GRAS, Inc., Touchstone Labs, and GKS Engineering Services. The Manufacturing process to make boron trichloride for grain refining is much simpler than preparing conventional grain refiners, with attendant environmental, capital, and energy savings. The manufacture of boride grain refining nuclei using the fy-Gem process avoids clusters, salt and oxide inclusions that cause quality problems in aluminum today.

  2. Pyrolysis process for the treatment of food waste.

    Grycová, Barbora; Koutník, Ivan; Pryszcz, Adrian

    2016-10-01

    Different waste materials were pyrolysed in the laboratory pyrolysis unit to the final temperature of 800°C with a 10min delay at the final temperature. After the pyrolysis process a mass balance of the resulting products, off-line analysis of the pyrolysis gas and evaluation of solid and liquid products were carried out. The gas from the pyrolysis experiments was captured discontinuously into Tedlar gas sampling bags and the selected components were analyzed by gas chromatography (methane, ethene, ethane, propane, propene, hydrogen, carbon monoxide and carbon dioxide). The highest concentration of measured hydrogen (WaCe 61%vol.; WaPC 66%vol.) was analyzed at the temperature from 750 to 800°C. The heating values of the solid and liquid residues indicate the possibility of its further use for energy recovery. Copyright © 2016 Elsevier Ltd. All rights reserved.

  3. 32 CFR 206.5 - Final proposal process.

    2010-07-01

    ... the basis of “educational value for the dollar.” NSEP is interested in funding proposals in areas... institution to integrate the efforts of the proposed program into the educational process? What plans are...) MISCELLANEOUS NATIONAL SECURITY EDUCATION PROGRAM (NSEP) GRANTS TO INSTITUTIONS OF HIGHER EDUCATION § 206.5...

  4. Added sugars and ultra-processed foods in Spanish households (1990-2010).

    Latasa, P; Louzada, M L D C; Martinez Steele, E; Monteiro, C A

    2017-12-26

    To study the association between ultra-processed foods acquisitions and added sugar content of total food purchases in Spanish households in 2010. Changes over time (1990-2000-2010) in ultra-processed food purchases and added sugars content of total food purchases are also compared. We used data from three nationally representative Household Budget Surveys (HBS) conducted in 1990, 2000 and 2010. Number of studied households was 21,012, 33,730 and 22,116, respectively. Purchased foods and drinks were classified according to NOVA food groups as ultra-processed foods, processed foods, unprocessed or minimally processed foods, or processed culinary ingredients. Linear and Poisson regressions were used to estimate the association between quintiles of energy contribution of ultra-processed foods and added sugars contents of total food purchases in 2010. Changes over time were assessed using tests of linear trend and Student's t test. In 2010, ultra-processed foods represented 31.7% of daily energy acquisitions and 80.4% of all added sugars. Added sugars content of food purchases raised from 7.3% in the lowest to 18.2% in the highest quintiles of energy contribution of ultra-processed foods. The risk of exceeding 10% energy from added sugars quadrupled between the lowest and highest quintiles. The percentage of ultra-processed foods on all food purchases almost tripled between 1990 and 2010 (from 11.0 to 31.7%), paralleling the increase of added sugars content (from 8.4 to 13.0%). Cutting down exceeding added sugars availability in Spain may require a reduction in ultra-processed food purchasing.

  5. UMTRA Surface Project management action process document: Final. Revision 2

    1996-06-01

    Title 1 of the UMTRCA authorized the DOE to undertake remedial actions at these designed sites and associated vicinity properties (VP), which contain uranium mill tailings and other residual radioactive materials (RRM) derived from the processing sites. Title 2 of the UMTRCA addresses uranium mill sites that were licensed at the time the UMTRCA was enacted. Cleanup of these Title 2 sites is the responsibility of the licensees. The cleanup of the Title 1 sites has been split into two separate projects: the Surface Project, which deals with the mill buildings, tailings, and contaminated soils at the sites and VPs; and the Ground Water Project, which is limited to the contaminated ground water at the sites. This management action process (MAP) document discusses the Uranium Mill Tailings Remedial Action (UMTRA) Surface Project. Since its inception through March 1996, the Surface Project (hereinafter called the Project) has cleaned up 16 of the 24 designated processing sites and approximately 5,000 VPs, reducing the risk to human health and the environment posed by the uranium mill tailings. Two of the 24 sites, Belfield and Bowman, North Dakota, will not be remediated at the request of the state, reducing the total number of sites to 22. By the start of FY1998, the remaining 6 processing sites and associated VPs will be cleaned up. The remedial action activities to be funded in FY1998 by the FY1998 budget request are remediation of the remaining Grand Junction, Colorado, VPs; closure of the Cheney disposal cell in Grand Junction, Colorado; and preparation of the completion reports for 4 completed sites

  6. Cavitational Hydrothermal Oxidation: A New Remediation Process - Final Report

    Suslick, K. S.

    2001-07-05

    During the past year, we have continued to make substantial scientific progress on our understanding of cavitation phenomena in aqueous media and applications of cavitation to remediation processes. Our efforts have focused on three separate areas: sonoluminescence as a probe of conditions created during cavitational collapse in aqueous media, the use of cavitation for remediation of contaminated water, and an addition of the use of ultrasound in the synthesis of novel heterogeneous catalysts for hydrodehalogenation of halocarbons under mild conditions.

  7. UMTRA Surface Project management action process document: Final. Revision 2

    NONE

    1996-06-01

    Title 1 of the UMTRCA authorized the DOE to undertake remedial actions at these designed sites and associated vicinity properties (VP), which contain uranium mill tailings and other residual radioactive materials (RRM) derived from the processing sites. Title 2 of the UMTRCA addresses uranium mill sites that were licensed at the time the UMTRCA was enacted. Cleanup of these Title 2 sites is the responsibility of the licensees. The cleanup of the Title 1 sites has been split into two separate projects: the Surface Project, which deals with the mill buildings, tailings, and contaminated soils at the sites and VPs; and the Ground Water Project, which is limited to the contaminated ground water at the sites. This management action process (MAP) document discusses the Uranium Mill Tailings Remedial Action (UMTRA) Surface Project. Since its inception through March 1996, the Surface Project (hereinafter called the Project) has cleaned up 16 of the 24 designated processing sites and approximately 5,000 VPs, reducing the risk to human health and the environment posed by the uranium mill tailings. Two of the 24 sites, Belfield and Bowman, North Dakota, will not be remediated at the request of the state, reducing the total number of sites to 22. By the start of FY1998, the remaining 6 processing sites and associated VPs will be cleaned up. The remedial action activities to be funded in FY1998 by the FY1998 budget request are remediation of the remaining Grand Junction, Colorado, VPs; closure of the Cheney disposal cell in Grand Junction, Colorado; and preparation of the completion reports for 4 completed sites.

  8. Mixing Processes in High-Level Waste Tanks - Final Report

    Peterson, P.F.

    1999-01-01

    The mixing processes in large, complex enclosures using one-dimensional differential equations, with transport in free and wall jets is modeled using standard integral techniques. With this goal in mind, we have constructed a simple, computationally efficient numerical tool, the Berkeley Mechanistic Mixing Model, which can be used to predict the transient evolution of fuel and oxygen concentrations in DOE high-level waste tanks following loss of ventilation, and validate the model against a series of experiments

  9. Electrochemical processing of nitrate waste solutions. Phase 2, Final report

    Genders, D.; Weinberg, N.; Hartsough, D. [Electrosynthesis Co., Inc., Cheektowaga, NY (US)

    1992-10-07

    The second phase of research performed at The Electrosynthesis Co., Inc. has demonstrated the successful removal of nitrite and nitrate from a synthetic effluent stream via a direct electrochemical reduction at a cathode. It was shown that direct reduction occurs at good current efficiencies in 1,000 hour studies. The membrane separation process is not readily achievable for the removal of nitrites and nitrates due to poor current efficiencies and membrane stability problems. A direct reduction process was studied at various cathode materials in a flow cell using the complete synthetic mix. Lead was found to be the cathode material of choice, displaying good current efficiencies and stability in short and long term tests under conditions of high temperature and high current density. Several anode materials were studied in both undivided and divided cell configurations. A divided cell configuration was preferable because it would prevent re-oxidation of nitrite by the anode. The technical objective of eliminating electrode fouling and solids formation was achieved although anode materials which had demonstrated good stability in short term divided cell tests corroded in 1,000 hour experiments. The cause for corrosion is thought to be F{sup {minus}} ions from the synthetic mix migrating across the cation exchange membrane and forming HF in the acid anolyte. Other possibilities for anode materials were explored. A membrane separation process was investigated which employs an anion and cation exchange membrane to remove nitrite and nitrate, recovering caustic and nitric acid. Present research has shown poor current efficiencies for nitrite and nitrate transport across the anion exchange membrane due to co-migration of hydroxide anions. Precipitates form within the anion exchange membranes which would eventually result in the failure of the membranes. Electrochemical processing offers a highly promising and viable method for the treatment of nitrate waste solutions.

  10. IMPROVING TACONITE PROCESSING PLANT EFFICIENCY BY COMPUTER SIMULATION, Final Report

    William M. Bond; Salih Ersayin

    2007-03-30

    This project involved industrial scale testing of a mineral processing simulator to improve the efficiency of a taconite processing plant, namely the Minorca mine. The Concentrator Modeling Center at the Coleraine Minerals Research Laboratory, University of Minnesota Duluth, enhanced the capabilities of available software, Usim Pac, by developing mathematical models needed for accurate simulation of taconite plants. This project provided funding for this technology to prove itself in the industrial environment. As the first step, data representing existing plant conditions were collected by sampling and sample analysis. Data were then balanced and provided a basis for assessing the efficiency of individual devices and the plant, and also for performing simulations aimed at improving plant efficiency. Performance evaluation served as a guide in developing alternative process strategies for more efficient production. A large number of computer simulations were then performed to quantify the benefits and effects of implementing these alternative schemes. Modification of makeup ball size was selected as the most feasible option for the target performance improvement. This was combined with replacement of existing hydrocyclones with more efficient ones. After plant implementation of these modifications, plant sampling surveys were carried out to validate findings of the simulation-based study. Plant data showed very good agreement with the simulated data, confirming results of simulation. After the implementation of modifications in the plant, several upstream bottlenecks became visible. Despite these bottlenecks limiting full capacity, concentrator energy improvement of 7% was obtained. Further improvements in energy efficiency are expected in the near future. The success of this project demonstrated the feasibility of a simulation-based approach. Currently, the Center provides simulation-based service to all the iron ore mining companies operating in northern

  11. Partnew - New solvent extraction processes for minor actinides - final report

    Madic, C.; Testard, F.; Hudson, M.J.; Liljenzin, J.O.; Christiansen, B.; Ferrando, M.; Facchini, A.; Geist, A.; Modolo, G.; Gonzalez-Espartero, A.; Mendoza, J. de

    2004-01-01

    The objectives of the European project PARTNEW were to define solvent extraction processes for the partitioning of the minor actinides, Am and Cm, from the aqueous high active raffinate or high active concentrate issuing the reprocessing of nuclear spent fuels by the PUREX process. Eleven laboratories participated to the research: 1/ CEA-DEN (Marcoule), 2/ CEA-DSM (Saclay), 3/ UREAD (U.K.), 4/ CTU (Sweden), 5/ ITU (Germany), 6/ ENEA (Italy), 7/ PoliMi (Italy), 8/ FZK-INE (Germany), 9/ FZJ-ISR (Germany), 10/ CIEMAT (Spain) and 11/ UAM (Spain). The research was organised into eight work packages (WP): Basic and applied DIAMEX studies, using diamide extractants for the co-extraction of actinides(III) (An(III)) and lanthanides(III) (Ln(III)) nitrates (WP1 and WP2), Basic and applied SANEX studies based on the use of polydentate N-ligands for the An(III)/Ln(III) separation (WP3 and WP4), Basic and applied SANEX studies based on the use of synergistic mixtures made of bis-(chloro-phenyl)-di-thio-phosphinic acid + neutral O-bearing ligand, (WP5 and WP6), Basic SANEX studies for the An(III)/Ln(III) separation, based on the use of new S-bearing ligands, Basic and applied studies for the Am(III)/Cm(III) separation. The work done in the fundamental and applied domains was very fruitful. Several processes have been successfully tested with genuine high active raffinates and concentrate. (authors)

  12. Consumption of processed food dietary patterns in four African populations.

    Holmes, Michelle D; Dalal, Shona; Sewram, Vikash; Diamond, Megan B; Adebamowo, Sally N; Ajayi, Ikeoluwapo O; Adebamowo, Clement; Chiwanga, Faraja S; Njelekela, Marina; Laurence, Carien; Volmink, Jimmy; Bajunirwe, Francis; Nankya-Mutyoba, Joan; Guwatudde, David; Reid, Todd G; Willett, Walter C; Adami, Hans-Olov; Fung, Teresa T

    2018-06-01

    To identify predominant dietary patterns in four African populations and examine their association with obesity. Cross-sectional study.Setting/SubjectsWe used data from the Africa/Harvard School of Public Health Partnership for Cohort Research and Training (PaCT) pilot study established to investigate the feasibility of a multi-country longitudinal study of non-communicable chronic disease in sub-Saharan Africa. We applied principal component analysis to dietary intake data collected from an FFQ developed for PaCT to ascertain dietary patterns in Tanzania, South Africa, and peri-urban and rural Uganda. The sample consisted of 444 women and 294 men. We identified two dietary patterns: the Mixed Diet pattern characterized by high intakes of unprocessed foods such as vegetables and fresh fish, but also cold cuts and refined grains; and the Processed Diet pattern characterized by high intakes of salad dressing, cold cuts and sweets. Women in the highest tertile of the Processed Diet pattern score were 3·00 times more likely to be overweight (95 % CI 1·66, 5·45; prevalence=74 %) and 4·24 times more likely to be obese (95 % CI 2·23, 8·05; prevalence=44 %) than women in this pattern's lowest tertile (both Pobesity. We identified two major dietary patterns in several African populations, a Mixed Diet pattern and a Processed Diet pattern. The Processed Diet pattern was associated with obesity.

  13. Fate of deoxynivalenol and deoxynivalenol-3-glucoside during cereal-based thermal food processing: a review study.

    Wu, Qinghua; Kuča, Kamil; Humpf, Hans-Ulrich; Klímová, Blanka; Cramer, Benedikt

    2017-02-01

    Deoxynivalenol (DON), the most commonly occurring trichothecene in nature, may affect animal and human health through causing diarrhea, vomiting, gastrointestinal inflammation, and immunomodulation. DON-3-glucoside (DON-3G) as a major plant metabolite of the mycotoxin is another "emerging" food safety issue in recent years. Humans may experience potential health risks by consuming DON-contaminated food products. Thus, it is crucial for human and animal health to study also the degradation of DON and DON-3G during thermal food processing. Baking, boiling, steaming, frying, and extrusion cooking are commonly used during thermal food processing and have promising effects on the reduction of mycotoxins in food. For DON, however, the observed effects of these methods, as reported in numerous studies, are ambiguous and do not present a clear picture with regard to reduction or transformation. This review summarized the influence of thermal processing on the stability of DON and the formation of degradation/conversion products. Besides this, also a release of DON and DON-3G from food matrix as well as the release of DON from DON-3G during processing is discussed. In addition, some conflicting findings as reported from the studies on thermal processing as well as cause-effect relationships of the different thermal procedures are explored. Finally, the potential toxic profiles of DON degradation products are discussed as well when data are available.

  14. Using the theory of planned behavior to determine factors influencing processed foods consumption behavior

    Kim, Og Yeon; Shim, Soonmi

    2014-01-01

    BACKGROUND/OBJECTIVES The purpose of this study is to identify how level of information affected intention, using the Theory of Planned Behavior. SUBJECTS/METHODS The study was conducted survey in diverse community centers and shopping malls in Seoul, which yielded N = 209 datasets. To compare processed foods consumption behavior, we divided samples into two groups based on level of information about food additives (whether respondents felt that information on food additives was sufficient or not). We analyzed differences in attitudes toward food additives and toward purchasing processed foods, subjective norms, perceived behavioral control, and behavioral intentions to processed foods between sufficient information group and lack information group. RESULTS The results confirmed that more than 78% of respondents thought information on food additives was insufficient. However, the group who felt information was sufficient had more positive attitudes about consuming processed foods and behavioral intentions than the group who thought information was inadequate. This study found people who consider that they have sufficient information on food additives tend to have more positive attitudes toward processed foods and intention to consume processed foods. CONCLUSIONS This study suggests increasing needs for nutrition education on the appropriate use of processed foods. Designing useful nutrition education requires a good understanding of factors which influence on processed foods consumption. PMID:24944779

  15. Using the theory of planned behavior to determine factors influencing processed foods consumption behavior.

    Seo, Sunhee; Kim, Og Yeon; Shim, Soonmi

    2014-06-01

    The purpose of this study is to identify how level of information affected intention, using the Theory of Planned Behavior. The study was conducted survey in diverse community centers and shopping malls in Seoul, which yielded N = 209 datasets. To compare processed foods consumption behavior, we divided samples into two groups based on level of information about food additives (whether respondents felt that information on food additives was sufficient or not). We analyzed differences in attitudes toward food additives and toward purchasing processed foods, subjective norms, perceived behavioral control, and behavioral intentions to processed foods between sufficient information group and lack information group. The results confirmed that more than 78% of respondents thought information on food additives was insufficient. However, the group who felt information was sufficient had more positive attitudes about consuming processed foods and behavioral intentions than the group who thought information was inadequate. This study found people who consider that they have sufficient information on food additives tend to have more positive attitudes toward processed foods and intention to consume processed foods. This study suggests increasing needs for nutrition education on the appropriate use of processed foods. Designing useful nutrition education requires a good understanding of factors which influence on processed foods consumption.

  16. Food Classification Systems Based on Food Processing: Significance and Implications for Policies and Actions: A Systematic Literature Review and Assessment.

    Moubarac, Jean-Claude; Parra, Diana C; Cannon, Geoffrey; Monteiro, Carlos A

    2014-06-01

    This paper is the first to make a systematic review and assessment of the literature that attempts methodically to incorporate food processing into classification of diets. The review identified 1276 papers, of which 110 were screened and 21 studied, derived from five classification systems. This paper analyses and assesses the five systems, one of which has been devised and developed by a research team that includes co-authors of this paper. The quality of the five systems is assessed and scored according to how specific, coherent, clear, comprehensive and workable they are. Their relevance to food, nutrition and health, and their use in various settings, is described. The paper shows that the significance of industrial food processing in shaping global food systems and supplies and thus dietary patterns worldwide, and its role in the pandemic of overweight and obesity, remains overlooked and underestimated. Once food processing is systematically incorporated into food classifications, they will be more useful in assessing and monitoring dietary patterns. Food classification systems that emphasize industrial food processing, and that define and distinguish relevant different types of processing, will improve understanding of how to prevent and control overweight, obesity and related chronic non-communicable diseases, and also malnutrition. They will also be a firmer basis for rational policies and effective actions designed to protect and improve public health at all levels from global to local.

  17. Occurrence of furan in commercial processed foods in Brazil.

    Arisseto, A P; Vicente, E; Furlani, R P Z; Ueno, M S; Pereira, A L D; Toledo, M C F

    2012-01-01

    Selected commercial processed foods available in the Brazilian market (306 samples) were analysed for furan content using a validated gas chromatography-mass spectrometry method preceded by headspace solid phase micro-extraction (HS-SPME-GC/MS). Canned and jarred foods, including vegetable, meat, fruit and sweet products, showed levels up to 32.8 µg kg⁻¹, with the highest concentrations observed in vegetables and meats. For coffee, furan content ranged from 253.0 to 5021.4 µg kg⁻¹ in the roasted ground coffee and from not detected to 156.6 µg kg⁻¹ in the beverage. For sauces, levels up to 138.1 µg kg⁻¹ were found. In cereal-based products, the highest concentrations (up to 191.3 µg kg⁻¹) were observed in breakfast cereal (corn flakes), cracker (cream crackers) and biscuit (wafer). In general, these results are comparable with those reported in other countries and will be useful for a preliminary estimate of the furan dietary intake in Brazil.

  18. Consumer concerns and expectations about novel food processing technologies: effects on product liking.

    Cardello, Armand V

    2003-06-01

    Eighty-eight consumers participated in a blind pre-test in which they rated their baseline preference for chocolate pudding, their liking of three tasted brands of chocolate pudding, and their level of concern for 20 different food processing and preservation technologies. All returned one month later and tasted the same puddings, but this time they were informed that they had been processed by one of several different novel or traditional food processing techniques. Different sub-groups were informed of the name of the process, the name plus a factual description of the process, or the name, the factual description, plus a benefit statement. Ratings of expected liking were obtained before and after viewing the samples, but before tasting them. Finally, subjects tasted and rated the products for actual liking and a sub-group rated their concern levels for the same 20 technologies rated in the pre-test. Pre-test results showed females to have significantly higher concern levels for all technologies. Individuals who had demonstrated a willingness to consume foods processed by one novel technology (irradiation) had lower concern ratings for all technologies. Ratings of concern were negatively correlated with expected liking for products believed to be processed by the technologies. Expected liking ratings were positively influenced by visual exposure to the product and by a safety and benefit statement. Linear regression of the change in product liking as a function of whether products were better or worse than expected supported an assimilation model of the effect of disconfirmed expectations on liking/disliking. Lastly, post-test concern levels for many of the technologies were reduced by participation in the study.

  19. Is food store type associated with the consumption of ultra-processed food and drink products in Brazil?

    Machado, Priscila Pereira; Claro, Rafael Moreira; Martins, Ana Paula Bortoletto; Costa, Janaína Calu; Levy, Renata Bertazzi

    2018-01-01

    To analyse the association between food store type and the consumption of ultra-processed products in Brazil. Data from the 2008-2009 Household Budget Survey involving a probabilistic sample of 55 970 Brazilian households. Food stores were grouped into nine categories. Foods and drinks were grouped according to characteristics of food processing. The contribution of each food store type to the total energy acquired from each food processing group, and according to quintiles of consumption of ultra-processed products, was estimated. Exploratory factor analysis was conducted to identify a pattern of food store usage. Linear regression models were performed to estimate the relationship between the purchase pattern and the consumption of ultra-processed products. In line with their larger market share, supermarkets accounted for 59 % of total energy and participated most in acquisition for three food groups, with emphasis on ultra-processed products (60·4 % of energy). The participation of supermarkets in total purchase tended to increase in populations with higher consumption of ultra-processed products, while the participation of small markets and small producers tended to decrease. The purchase pattern characterized by use of traditional retail (street fairs and vendors, small markets, small farmers, butcheries) was associated with a smaller consumption of ultra-processed products. Food policies and interventions aiming to reduce the consumption of ultra-processed products should consider the influence of supermarkets on the consumption of these products. A purchase pattern based on traditional retail constitutes an important tool for promoting healthy eating in Brazil.

  20. Characterize and Model Final Waste Formulations and Offgas Solids from Thermal Treatment Processes - FY-98 Final Report for LDRD 2349

    Kessinger, Glen Frank; Nelson, Lee Orville; Grandy, Jon Drue; Zuck, Larry Douglas; Kong, Peter Chuen Sun; Anderson, Gail

    1999-08-01

    The purpose of LDRD #2349, Characterize and Model Final Waste Formulations and Offgas Solids from Thermal Treatment Processes, was to develop a set of tools that would allow the user to, based on the chemical composition of a waste stream to be immobilized, predict the durability (leach behavior) of the final waste form and the phase assemblages present in the final waste form. The objectives of the project were: • investigation, testing and selection of thermochemical code • development of auxiliary thermochemical database • synthesis of materials for leach testing • collection of leach data • using leach data for leach model development • thermochemical modeling The progress toward completion of these objectives and a discussion of work that needs to be completed to arrive at a logical finishing point for this project will be presented.

  1. FoodPro: A Web-Based Tool for Evaluating Covariance and Correlation NMR Spectra Associated with Food Processes

    Eisuke Chikayama

    2016-10-01

    Full Text Available Foods from agriculture and fishery products are processed using various technologies. Molecular mixture analysis during food processing has the potential to help us understand the molecular mechanisms involved, thus enabling better cooking of the analyzed foods. To date, there has been no web-based tool focusing on accumulating Nuclear Magnetic Resonance (NMR spectra from various types of food processing. Therefore, we have developed a novel web-based tool, FoodPro, that includes a food NMR spectrum database and computes covariance and correlation spectra to tasting and hardness. As a result, FoodPro has accumulated 236 aqueous (extracted in D2O and 131 hydrophobic (extracted in CDCl3 experimental bench-top 60-MHz NMR spectra, 1753 tastings scored by volunteers, and 139 hardness measurements recorded by a penetrometer, all placed into a core database. The database content was roughly classified into fish and vegetable groups from the viewpoint of different spectrum patterns. FoodPro can query a user food NMR spectrum, search similar NMR spectra with a specified similarity threshold, and then compute estimated tasting and hardness, covariance, and correlation spectra to tasting and hardness. Querying fish spectra exemplified specific covariance spectra to tasting and hardness, giving positive covariance for tasting at 1.31 ppm for lactate and 3.47 ppm for glucose and a positive covariance for hardness at 3.26 ppm for trimethylamine N-oxide.

  2. FoodPro: A Web-Based Tool for Evaluating Covariance and Correlation NMR Spectra Associated with Food Processes.

    Chikayama, Eisuke; Yamashina, Ryo; Komatsu, Keiko; Tsuboi, Yuuri; Sakata, Kenji; Kikuchi, Jun; Sekiyama, Yasuyo

    2016-10-19

    Foods from agriculture and fishery products are processed using various technologies. Molecular mixture analysis during food processing has the potential to help us understand the molecular mechanisms involved, thus enabling better cooking of the analyzed foods. To date, there has been no web-based tool focusing on accumulating Nuclear Magnetic Resonance (NMR) spectra from various types of food processing. Therefore, we have developed a novel web-based tool, FoodPro, that includes a food NMR spectrum database and computes covariance and correlation spectra to tasting and hardness. As a result, FoodPro has accumulated 236 aqueous (extracted in D₂O) and 131 hydrophobic (extracted in CDCl₃) experimental bench-top 60-MHz NMR spectra, 1753 tastings scored by volunteers, and 139 hardness measurements recorded by a penetrometer, all placed into a core database. The database content was roughly classified into fish and vegetable groups from the viewpoint of different spectrum patterns. FoodPro can query a user food NMR spectrum, search similar NMR spectra with a specified similarity threshold, and then compute estimated tasting and hardness, covariance, and correlation spectra to tasting and hardness. Querying fish spectra exemplified specific covariance spectra to tasting and hardness, giving positive covariance for tasting at 1.31 ppm for lactate and 3.47 ppm for glucose and a positive covariance for hardness at 3.26 ppm for trimethylamine N -oxide.

  3. Enzyme technology for precision functional food ingredient processes.

    Meyer, Anne S

    2010-03-01

    A number of naturally occurring dietary substances may exert physiological benefits. The production of enhanced levels or particularly tailored versions of such candidate functional compounds can be targeted by enzymatic catalysis. The recent literature contains examples of enhancing bioavailability of iron via enzyme-catalyzed degradation of phytate in wheat bran, increasing diacyl-glycerol and conjugated linoleic acid levels by lipase action, enhancing the absorption of the citrus flavonoid hesperetin via rhamnosidase treatment, and obtaining solubilized dietary fiber via enzymatic modification of potato starch processing residues. Such targeted enzyme-catalyzed reactions provide new invention opportunities for designing functional foods with significant health benefits. The provision of well-defined naturally structured compounds can, moreover, assist in obtaining the much-needed improved understanding of the physiological benefits of complex natural substances.

  4. Host state screening process: Regional management plan: [Final report

    Drobny, N.L.

    1986-01-01

    This report discusses the procedure and cirteria that the Commission selected for designating a host state, should a state not volunteer for this role. Section 2 describes the wide range of approaches considered. Advantages and disadvantages of each are reviewed briefly, and the overall timetable established by the Commission for host state selection is presented. Section 3 describes the selected process for host state designation which involves emphasis on waste quantities generated and transportation factors. Section 4 presents relevant data on characteristics of wastes presently generated and presents estimates for future waste generation to Year 2015. Section 5 presents the results of transportation analyses considering the distance over which waste would be transported and safety (accident) statistics for waste transport routes. Section 6 integrates the conclusions from the analysis of waste volumes generated and transportation factors and suggests how these results might be used to designate a host state. 11 refs., 6 figs., 9 tabs

  5. Conversion of food processing wastes to biofuel using clostridia.

    Abd-Alla, Mohamed Hemida; Zohri, Abdel-Naser Ahmed; El-Enany, Abdel-Wahab Elsadek; Ali, Shimaa Mohamed

    2017-12-01

    This study aims to demonstrate the recycling of food processing wastes as a low cost-effective substrate for acetone - butanol - ethanol (ABE) production. Potato peels and cheese whey were utilized during fermentation with eight local Clostridium strains in addition to the commercial strain, C. acetobutylicum ATCC 824 for ABE and organic acids production. From potato peels, Clostridium beijerinckii ASU10 produced the highest ABE production (17.91 g/l) representing 61.3% butanol (10.98 g/l), 33.6% acetone (6.02 g/l) and 5.1% ethanol (0.91 g/l). While, C. chauvoei ASU12 showed the highest acid production (8.15 g/l) including 5.50 and 2.61 g/l acetic and butyric acids, respectively. Use of cheese whey as fermentable substrate exhibited a substantial increase in ethanol ratio and decrease in butanol ratio compared to those produced from potato peels. Clostridium beijerinckii ASU5 produced the highest ABE concentration (7.13 g/l) representing 50.91% butanol (3.63 g/l), 35.34% acetone (2.52 g/l) and 13.74% ethanol (0.98 g/l). The highest acid production (8.00 g/l) was obtained by C. beijerinckii ASU5 representing 4.89 and 3.11 g/l for acetic and butyric acid, respectively. Supplementation of potato peels with an organic nitrogen source showed NH 4 NO 3 promoted ABE production more than yeast extract. In conclusion, this study introduced an ecofriendly and economical practice for utilization of food processing wastes (renewable substrates as potato peels and cheese whey) for biofuel production using various Clostridium strains. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. Anion-exchange resin-based desulfurization process. Final report

    Sheth, A C; Dharmapurikar, R; Strevel, S D

    1994-01-01

    The following investigations were performed: (1) batch mode screening of eleven(11) commercially available resins and selection of three candidate resins for further evaluation in a fixed-bed setup. (2) Process variables study using three candidate resins in the fixed-bed setup and selection of the ``best`` resin for process economics development. (3) Exhaustion efficiency and solution concentration were found to be inversely related necessitating a trade-off between the resin cost versus the cost of evaporation/concentration of ensuing effluents. (4) Higher concentration of the HCO{sub 3}{sup {minus}} form of active sites over less active CO{sub 3}{sup 2{minus}} form of sites in the resin was believed to be the main reason for the observed increase in the equilibrium capacity of the resin at an elevated static CO{sub 2}-pressure. This Increase in capacity was found to level off around 80--120 psig range. The increase in CO{sub 2}-pressure, however, did not appear to affect the overall ion-exchange kinetics. (5) In the fixed-bed mode, the solution concentration was found to affect the equilibrium capacity of candidate resins. Their relationship was well satisfied by the Langmuir type non-linear equilibrium isotherm. Alternatively, the effect of solution concentration on overall ion-exchange kinetics varied from resin to resin. (6) Product inhibition effect on the resin was observed as an initial increase followed by a significant decrease in the resin`s equilibrium capacity for SO{sub 4}{sup 2{minus}} as the HCO{sub 3}{sup {minus}}/SO{sub 4}{sup 2{minus}} molar ratio in the solution was increased from 0 to 1.0. This ratio, however, did not affect the overall ion-exchange kinetics.

  7. Food safety management systems performance in African food processing companies: a review of deficiencies and possible improvement strategies.

    Kussaga, Jamal B; Jacxsens, Liesbeth; Tiisekwa, Bendantunguka Pm; Luning, Pieternel A

    2014-08-01

    This study seeks to provide insight into current deficiencies in food safety management systems (FSMS) in African food-processing companies and to identify possible strategies for improvement so as to contribute to African countries' efforts to provide safe food to both local and international markets. This study found that most African food products had high microbiological and chemical contamination levels exceeding the set (legal) limits. Relative to industrialized countries, the study identified various deficiencies at government, sector/branch, retail and company levels which affect performance of FSMS in Africa. For instance, very few companies (except exporting and large companies) have implemented HACCP and ISO 22000:2005. Various measures were proposed to be taken at government (e.g. construction of risk-based legislative frameworks, strengthening of food safety authorities, recommend use of ISO 22000:2005, and consumers' food safety training), branch/sector (e.g. sector-specific guidelines and third-party certification), retail (develop stringent certification standards and impose product specifications) and company levels (improving hygiene, strict raw material control, production process efficacy, and enhancing monitoring systems, assurance activities and supportive administrative structures). By working on those four levels, FSMS of African food-processing companies could be better designed and tailored towards their production processes and specific needs to ensure food safety. © 2014 Society of Chemical Industry.

  8. Cytotoxic and mutagenic effects of conventionally processed foods in comparison with irradiated foods

    Mohyuddin, M.

    1975-05-01

    Several kinds of spices and processed food namely onion, garlic, turmeric, red chillies, black pepper, cloves, cinnamon, simple curry, meat curry, curry prepared from irradiated onions and potatoes and curry from irradiated fish were tested for cytotoxocity and mutagenicity. Onion root tips were used in the studies of cytotoxicity. Pseudomonas fluorescens strain NCTC-9428, a streptomycin-sensitive strain, was used as the test organism in mutagenicity studies. Wide range of cytoxicity was observed in all spices and food tested, varying from 48% abnormality in root tips in black pepper to 97.7% in garlic extract. The degrees of cytotoxic abnormality of irradiated potatoes and onions appeared to be lower than in their control counterparts. The average percentages of cytotoxic abnormality in curry prepared from irradiated fish and the one prepared from irradiated potatoes and onions, at their original concentration, were 95.92% and 99.5% resp. Digesting curry prepared from irradiated potatoes and onions with bile salts appeared to show some detoxification characteristics. The mutation rate of Pseudomonas fluorescens grown in media containing unirradiated spice extract was significantly higher than in the control (media without spice extract). However, the mutation rate of an extract of irradiated onions (10 krad) showed no difference from the control. There was no difference in the mutation rate on extracts of curry prepared from irradiated onions and potatoes from the one prepared from unirradiated onions and potatoes

  9. Process Inherent Ultimate Safety (PIUS) reactor evaluation study: Final report

    1987-02-01

    This report presents the results of an independent study by United Engineers and Constructors (UNITED) of the SECURE-P Process Inherent Ultimate Safety (PIUS) Reactor Concept which is presently under development by the Swedish light water reactor vendor ASEA-ATOM of Vasteras, Sweden. This study was performed to investigate whether there is any realistic basis for believing that the PIUS reactor could be a viable competitor in the US energy market in the future. Assessments were limited to the technical, economic and licensing aspects of PIUS. Socio-political issues, while certainly important in answering this question, are so broad and elusive that it was considered that addressing them with the limited perspective of one small group from one company would be of questionable value and likely be misleading. Socio-political issues aside, the key issue is economics. For this reason, the specific objectives of this study were to determine if the estimated PIUS plant cost will be competitive in the US market and to identify and evaluate the technical and licensing risks that might make PIUS uneconomical or otherwise unacceptable

  10. Linear and Nonlinear MHD Wave Processes in Plasmas. Final Report

    Tataronis, J. A.

    2004-01-01

    This program treats theoretically low frequency linear and nonlinear wave processes in magnetized plasmas. A primary objective has been to evaluate the effectiveness of MHD waves to heat plasma and drive current in toroidal configurations. The research covers the following topics: (1) the existence and properties of the MHD continua in plasma equilibria without spatial symmetry; (2) low frequency nonresonant current drive and nonlinear Alfven wave effects; and (3) nonlinear electron acceleration by rf and random plasma waves. Results have contributed to the fundamental knowledge base of MHD activity in symmetric and asymmetric toroidal plasmas. Among the accomplishments of this research effort, the following are highlighted: Identification of the MHD continuum mode singularities in toroidal geometry. Derivation of a third order ordinary differential equation that governs nonlinear current drive in the singular layers of the Alfven continuum modes in axisymmetric toroidal geometry. Bounded solutions of this ODE implies a net average current parallel to the toroidal equilibrium magnetic field. Discovery of a new unstable continuum of the linearized MHD equation in axially periodic circular plasma cylinders with shear and incompressibility. This continuum, which we named ''accumulation continuum'' and which is related to ballooning modes, arises as discrete unstable eigenfrequency accumulate on the imaginary frequency axis in the limit of large mode numbers. Development of techniques to control nonlinear electron acceleration through the action of multiple coherent and random plasmas waves. Two important elements of this program aye student participation and student training in plasma theory

  11. Utilization of food outlets and intake of minimally processed and ultra-processed foods among 7 to 14-year-old schoolchildren. A cross-sectional study.

    Corrêa, Elizabeth Nappi; Retondario, Anabelle; Alves, Mariane de Almeida; Bricarello, Liliana Paula; Rockenbach, Gabriele; Hinnig, Patrícia de Fragas; Neves, Janaina das; Vasconcelos, Francisco de Assis Guedes de

    2018-03-29

    Access to food retailers is an environmental determinant that influences what people consume. This study aimed to test the association between the use of food outlets and schoolchildren's intake of minimally processed and ultra-processed foods. This was a cross-sectional study conducted in public and private schools in Florianópolis, state of Santa Catarina, southern Brazil, from September 2012 to June 2013. The sample consisted of randomly selected clusters of schoolchildren aged 7 to 14 years, who were attending 30 schools. Parents or guardians provided socioeconomic and demographic data and answered questions about use of food outlets. Dietary intake was surveyed using a dietary recall questionnaire based on the previous day's intake. The foods or food groups were classified according to the level of processing. Negative binomial regression was used for data analysis. We included 2,195 schoolchildren in the study. We found that buying foods from snack bars or fast-food outlets was associated with the intake frequency of ultra-processed foods among 11-14 years old in an adjusted model (incidence rate ratio, IRR: 1.11; 95% confidence interval, CI: 1.01;1.23). Use of butchers was associated with the intake frequency of unprocessed/minimally processed foods among children 11-14 years old in the crude model (IRR: 1.11; 95% CI: 1.01;1.22) and in the adjusted model (IRR: 1.11; 95% CI: 1.06;1.17). Use of butchers was associated with higher intake of unprocessed/minimally processed foods while use of snack bars or fast-food outlets may have a negative impact on schoolchildren's dietary habits.

  12. Interpolation of final geometry and result fields in process parameter space

    Misiun, Grzegorz Stefan; Wang, Chao; Geijselaers, Hubertus J.M.; van den Boogaard, Antonius H.; Saanouni, K.

    2016-01-01

    Different routes to produce a product in a bulk forming process can be described by a limited set of process parameters. The parameters determine the final geometry as well as the distribution of state variables in the final shape. Ring rolling has been simulated using different parameter settings.

  13. The defense waste processing facility: the final processing step for defense high-level waste disposal

    Cowan, S.P.; Sprecher, W.M.; Walton, R.D.

    1983-01-01

    The policy of the U.S. Department of Energy is to pursue an aggressive and credible waste management program that advocates final disposal of government generated (defense) high-level nuclear wastes in a manner consistent with environmental, health, and safety responsibilities and requirements. The Defense Waste Processing Facility (DWPF) is an essential component of the Department's program. It is the first project undertaken in the United States to immobilize government generated high-level nuclear wastes for geologic disposal. The DWPF will be built at the Department's Savannah River Plant near Aiken, South Carolina. When construction is complete in 1989, the DWPF will begin processing the high-level waste at the Savannah River Plant into a borosilicate glass form, a highly insoluble and non-dispersable product, in easily handled canisters. The immobilized waste will be stored on site followed by transportation to and disposal in a Federal repository. The focus of this paper is on the DWPF. The paper discusses issues which justify the project, summarizes its technical attributes, analyzes relevant environmental and insitutional factors, describes the management approach followed in transforming technical and other concepts into concrete and steel, and concludes with observations about the future role of the facility

  14. Energy contribution of NOVA food groups and sociodemographic determinants of ultra-processed food consumption in the Mexican population.

    Marrón-Ponce, Joaquín A; Sánchez-Pimienta, Tania G; Louzada, Maria Laura da Costa; Batis, Carolina

    2018-01-01

    To identify the energy contributions of NOVA food groups in the Mexican diet and the associations between individual sociodemographic characteristics and the energy contribution of ultra-processed foods (UPF). We classified foods and beverages reported in a 24 h recall according to the NOVA food framework into: (i) unprocessed or minimally processed foods; (ii) processed culinary ingredients; (iii) processed foods; and (iv) UPF. We estimated the energy contribution of each food group and ran a multiple linear regression to identify the associations between sociodemographic characteristics and UPF energy contribution. Mexican National Health and Nutrition Survey 2012. Individuals ≥1 years old (n 10 087). Unprocessed or minimally processed foods had the highest dietary energy contribution (54·0 % of energy), followed by UPF (29·8 %), processed culinary ingredients (10·2 %) and processed foods (6·0 %). The energy contribution of UPF was higher in: pre-school-aged children v. other age groups (3·8 to 12·5 percentage points difference (pp)); urban areas v. rural (5·6 pp); the Central and North regions v. the South (2·7 and 8·4 pp, respectively); medium and high socio-economic status v. low (4·5 pp, in both); and with higher head of household educational level v. without education (3·4 to 7·8 pp). In 2012, about 30 % of energy in the Mexican diet came from UPF. Our results showed that younger ages, urbanization, living in the North region, high socio-economic status and high head of household educational level are sociodemographic factors related to higher consumption of UPF in Mexico.

  15. Impact of ultra-processed foods on micronutrient content in the Brazilian diet.

    Louzada, Maria Laura da Costa; Martins, Ana Paula Bortoletto; Canella, Daniela Silva; Baraldi, Larissa Galastri; Levy, Renata Bertazzi; Claro, Rafael Moreira; Moubarac, Jean-Claude; Cannon, Geoffrey; Monteiro, Carlos Augusto

    2015-01-01

    OBJECTIVE To evaluate the impact of consuming ultra-processed foods on the micronutrient content of the Brazilian population's diet. METHODS This cross-sectional study was performed using data on individual food consumption from a module of the 2008-2009 Brazilian Household Budget Survey. A representative sample of the Brazilian population aged 10 years or over was assessed (n = 32,898). Food consumption data were collected through two 24-hour food records. Linear regression models were used to assess the association between the nutrient content of the diet and the quintiles of ultra-processed food consumption - crude and adjusted for family income per capita. RESULTS Mean daily energy intake per capita was 1,866 kcal, with 69.5% coming from natural or minimally processed foods, 9.0% from processed foods and 21.5% from ultra-processed foods. For sixteen out of the seventeen evaluated micronutrients, their content was lower in the fraction of the diet composed of ultra-processed foods compared with the fraction of the diet composed of natural or minimally processed foods. The content of 10 micronutrients in ultra-processed foods did not reach half the content level observed in the natural or minimally processed foods. The higher consumption of ultra-processed foods was inversely and significantly associated with the content of vitamins B12, vitamin D, vitamin E, niacin, pyridoxine, copper, iron, phosphorus, magnesium, selenium and zinc. The reverse situation was only observed for calcium, thiamin and riboflavin. CONCLUSIONS The findings of this study highlight that reducing the consumption of ultra-processed foods is a natural way to promote healthy eating in Brazil and, therefore, is in line with the recommendations made by the Guia Alimentar para a População Brasileira (Dietary Guidelines for the Brazilian Population) to avoid these foods.

  16. Sodium Reduction in Processed Foods in Brazil: Analysis of Food Categories and Voluntary Targets from 2011 to 2017.

    Nilson, Eduardo A F; Spaniol, Ana M; Gonçalves, Vivian S S; Moura, Iracema; Silva, Sara A; L'Abbé, Mary; Jaime, Patricia C

    2017-07-12

    Non-communicable diseases, including cardiovascular diseases, are responsible for over 70% of deaths in Brazil. Currently, over 25% of Brazilian adults are diagnosed as hypertensive; overall, current dietary sodium intake in Brazil (4700 mg/person) is over twice the international recommendations, and 70-90% of adolescents and adults consume excessive sodium. National sodium reduction strategies consider the main dietary sources of sodium to be added salt to foods, foods consumed outside of the household, and sodium in processed foods. The national voluntary strategy for sodium reduction in priority food categories has been continuously monitored over a 6-year period (2011-2017) and there was a significant 8-34% reduction in the average sodium content of over half food categories. Different food categories have undergone differing reductions in sodium over time, aiding gradual biannual targets to allow industries to develop new technologies and consumers to adapt to foods with less salt. By 2017, most products of all food categories had met the regional targets proposed by the Pan American Health Organization, showing that voluntary sodium reduction strategies can potentially contribute to food reformulation. Nevertheless, regulatory approaches may still be necessary in the future in order to reach all food producers and to allow stronger enforcement to meet more stringent regional targets.

  17. Food processing methods influence the glycaemic indices of some commonly eaten West Indian carbohydrate-rich foods.

    Bahado-Singh, P S; Wheatley, A O; Ahmad, M H; Morrison, E Y St A; Asemota, H N

    2006-09-01

    Glycaemic index (GI) values for fourteen commonly eaten carbohydrate-rich foods processed by various methods were determined using ten healthy subjects. The foods studied were round leaf yellow yam (Dioscorea cayenensis), negro and lucea yams (Dioscorea rotundata), white and sweet yams (Dioscorea alata), sweet potato (Solanum tuberosum), Irish potato (Ipomoea batatas), coco yam (Xanthosoma spp.), dasheen (Colocasia esculenta), pumpkin (Cucurbita moschata), breadfruit (Artocarpus altilis), green banana (Musa sapientum), and green and ripe plantain (Musa paradisiaca). The foods were processed by boiling, frying, baking and roasting where applicable. Pure glucose was used as the standard with a GI value of 100. The results revealed marked differences in GI among the different foods studied ranging from 35 (se 3) to 94 (se 8). The area under the glucose response curve and GI value of some of the roasted and baked foods were significantly higher than foods boiled or fried (P<0.05). The results indicate that foods processed by roasting or baking may result in higher GI. Conversely, boiling of foods may contribute to a lower GI diet.

  18. Sectoral Innovation Foresight. Food and Drinks sector. Final Report. Task 2

    Leis, M.; Gijsbers, G.; Zee, F.A. van der

    2010-01-01

    Although food and drinks are essential for human life, the food and beverage industry is generally perceived as low-to-mid-technology sector as measured on common indicators for innovativeness and supported by CIS4 data. In principal, however, there exist many innovation possibilities within the

  19. Applying a food processing-based classification system to a food guide: a qualitative analysis of the Brazilian experience.

    Davies, Vanessa Fernandes; Moubarac, Jean-Claude; Medeiros, Kharla Janinny; Jaime, Patricia Constante

    2018-01-01

    The present paper aimed to identify the stakeholders, as well as their arguments and recommendations, in the debate on the application of a food processing-based classification system to the new Brazilian Food Guide. Qualitative approach; an analysis was made of documents resulting from the consultation conducted for the development of the new Brazilian Food Guide, which uses the NOVA classification for its dietary recommendations. A thematic matrix was constructed and the resulting themes represented the main points for discussion raised during the consultation. Brazil. Actors from academia, government and associations/unions/professional bodies/organizations related to the area of nutrition and food security; non-profit institutions linked to consumer interests and civil society organizations; organizations, associations and food unions linked to the food industry; and individuals. Four themes were identified: (i) conflicting paradigms; (ii) different perceptions about the role and need of individuals; (iii) we want more from the new food guide; and (iv) a sustainable guide. There was extensive participation from different sectors of society. The debate generated by the consultation revealed two main conflicting opinions: a view aligned with the interests of the food industry and a view of healthy eating which serves the interests of the population. The first group was against the adoption of a food processing-based classification system in a public policy such as the new Brazilian Food Guide. The second group, although mostly agreeing with the new food guide, argued that it failed to address some important issues related to the food and nutrition agenda in Brazil.

  20. Association of neighbourhood food availability with the consumption of processed and ultra-processed food products by children in a city of Brazil: a multilevel analysis.

    Leite, Fernanda Helena Marrocos; de Carvalho Cremm, Elena; de Abreu, Débora Silva Costa; Oliveira, Maria Aparecida de; Budd, Nadine; Martins, Paula Andrea

    2018-01-01

    To investigate the association between neighbourhood food availability and the consumption of ready-to-consume products (RCP), either processed or ultra-processed, and unprocessed/minimally processed foods (UF-MPF) by children. Cross-sectional. 24 h Dietary recalls were collected from children from January 2010 to June 2011. Neighbourhood food availability data were collected from 672 food stores located within 500 m of participants' homes, using an adapted and validated instrument. Neighbourhood-level socio-economic status (SES) was obtained by calculating the mean years of household head's education level in each census tract covered by 500 m buffers. Foods that were consumed by children and/or available in the food stores were classified based on their degree of industrial processing. Multilevel random-effect models examined the association between neighbourhood food availability and children's diets. Santos, Brazil. Children (n 513) under 10 years old (292 aged food stores was associated with increased RCP consumption (Pfood policies and interventions that aim to reduce RCP consumption in Santos and similar settings should focus on reducing the availability in food stores. The results also suggest that interventions should not only increase the availability of UF-MPF in lower-SES neighbourhoods, but should strive to make UF-MPF accessible within these environments.

  1. Renovation of food-processing wastewater by a Riparian wetland

    Baillie, Priscilla W.

    1995-01-01

    Treated wastewater from a food-processing plant, together with intermittent outflow from a hypereutrophic pond, were discharged over a 20-year period to a cattail-dominated wetland and hence to a small stream. Organics and nutriet levels in the effluent were comparable to levels in domestic wastewater. Fifteen variables were monitored upstream and downstream from the plant over 18 months. Means for most variables were slightly higher downstream, but differences between stations were not statistically significant. Wetland processing of nitrogen was markedly affected by a change from drought to flood conditions. After accounting for dilution, the overall effect of the wetland on the effluent was to reduce biological oxygen demand 43.7%, ammonia N 46.3%, nitrate/nitrite N 17.4%, and conductivity 15.6%. However, total suspended solids were increased 41.4%, total organic nitrogen 28.8%, and total phosphorus 24.7%. It was concluded that the wetland effectively renovated the effluent but the removal efficiency would be improved if the effluent were pretreated to reduce phosphorus and dispersed to increase residence time in the wetland.

  2. Consultation on microbiological criteria for foods to be further processed including by irradiation

    1989-01-01

    Many foods carry microorganisms that may have serious consequences for the health of the consumer. There is thus often a need for processing to eliminate the resulting health hazards. Concern has been expressed that treatments, especially irradiation, might be applied to clean up food that has not been hygienically processed. Adherence to good manufacturing practice can greatly assist food processors to ensure food quality and safety. Figs

  3. Phenolic-enriched foods: sources and processing for enhanced health benefits.

    McDougall, Gordon J

    2017-05-01

    Polyphenols are ubiquitous secondary products present in many plant foods. Their intake has been associated with health benefits ranging from reduced incidence of CVD, diabetes and cancers to improved neurodegenerative outcomes. Major dietary sources include beverages such as coffee, teas and foods such as chocolate. Fruits are also major sources and berries in particular are a palatable source of a diverse range of polyphenol components. There are a number of ways that polyphenol uptake could be increased and healthier polyphenol-rich foods could be produced with specific compositions to target-specific health effects. Firstly, we could exploit the genetic diversity of plants (with a focus on berries) to select varieties that have enhanced levels of specific polyphenols implicated in disease mitigation (e.g. anthocyanins, tannins or flavonols). Working with variation induced by environmental and agronomic factors, modern molecular breeding techniques could exploit natural variation and beneficially alter polyphenol content and composition, although this could be relatively long term. Alternatively, we could employ a synthetic biology approach and design new plants that overexpress certain genes or re-deploy more metabolic effort into specific polyphenols. However, such 'polyphenol-plus' fruit could prove unpalatable as polyphenols contribute to sensorial properties (e.g. astringency of tannins). However, if the aim was to produce a polyphenol as a pharmaceutical then 'lifting' biosynthetic pathways from plants and expressing them in microbial vectors may be a feasible option. Secondly, we could design processing methods to enhance the polyphenolic composition or content of foods. Fermentation of teas, cocoa beans and grapes, or roasting of cocoa and coffee beans has long been used and can massively influence polyphenol composition and potential bioactivity. Simple methods such as milling, heat treatment, pasteurisation or juicing (v. pureeing) can have notable

  4. Sodium content and labelling of processed and ultra-processed food products marketed in Brazil.

    Martins, Carla Adriano; de Sousa, Anete Araújo; Veiros, Marcela Boro; González-Chica, David Alejandro; Proença, Rossana Pacheco da Costa

    2015-05-01

    To analyse the Na content and labelling of processed and ultra-processed food products marketed in Brazil. Cross-sectional study. A large supermarket in Florianopolis, southern Brazil. Ingredient lists and Na information on nutrition labels of all processed and ultra-processed pre-prepared meals and prepared ingredients, used in lunch or dinner, available for sale in the supermarket. The study analysed 1416 products, distributed into seven groups and forty-one subgroups. Five products did not have Na information. Most products (58.8 %; 95 % CI 55.4, 62.2 %) had high Na content (>600 mg/100 g). In 78.0 % of the subgroups, variation in Na content was at least twofold between similar products with high and low Na levels, reaching 634-fold difference in the 'garnishes and others' subgroup. More than half of the products (52.0 %; 95 % CI 48.2, 55.6 %) had at least one Na-containing food additive. There was no relationship between the appearance of salt on the ingredients list (first to third position on the list) and a product's Na content (high, medium or low; P=0.08). Most food products had high Na content, with great variation between similar products, which presents new evidence for reformulation opportunities. There were inconsistencies in Na labelling, such as lack of nutritional information and incomplete ingredient descriptions. The position of salt on the ingredients list did not facilitate the identification of high-Na foods. We therefore recommend a reduction in Na in these products and a review of Brazilian legislation.

  5. Availability of processed foods in the perimeter of public schools in urban areas.

    Leite, Fernanda Helena Marrocos; Oliveira, Maria Aparecida de; Cremm, Elena Carvalho; Abreu, Débora Silva Costa de; Maron, Luana Rieffe; Martins, Paula Andrea

    2012-07-01

    To assess the availability of food in relation to their degree of industrial processing and the types of food stores in the perimeters of elementary schools. This is a cross-sectional study. 82 food stores located within a 500 m radius buffer of three public schools located in three distinct regions with different socioeconomic levels in the municipality of Santos, state of São Paulo, Brazil, were assessed. All streets within a 500-meter radius of the schools were covered, geographic coordinates were recorded and information about the stores and food items available were collected by direct observation and interview with store managers. Available food items were classified in relation to their degree of industrial processing as ultra-processed foods and minimally processed foods. Kernel's density maps were used to assess the degree of agglomeration of stores near the schools. The stores that offered mostly ultra-processed foods were significantly closer to schools than those who offered mostly minimally processed foods. There was a significant difference between the availability of processed food in different types of stores and between the three regions assessed. The data found by this work evidence that children who attend the three public schools assessed are exposed to an environment that encourages the consumption of ultra-processed foods through easier access of these products in the studied stores.

  6. Characterization of the Degree of Food Processing in Relation With Its Health Potential and Effects.

    Fardet, Anthony

    2018-01-01

    Up today technological processes are intended to produce safe and palatable food products. Yet, it is also expected that processing produces healthy and sustainable foods. However, due to the dramatic increase of chronic diseases prevalence worldwide, i.e., obesity, type 2 diabetes, cardiovascular diseases, and some cancers, ultraprocessing has been pointed out as producing unhealthy foods, rich in energy and poor in protective micronutrients and fiber, i.e., "empty" calories. Indeed the 1980s saw massive arrivals of ultraprocessed foods in supermarkets, i.e., fractionated-recombined foods with added ingredients and/or additives. Epidemiological studies clearly emphasized that populations adhering the most to ultraprocessed foods, e.g., processed meat, refined grains, ultraprocessed plant-based foods, and/or sweetened beverages, exhibited the higher prevalence of chronic diseases. This prompted researchers to classify foods according to their degree of processing as with the international NOVA classification (i.e., un/minimally processed, processed, and ultraprocessed foods). More and more studies showed that such a classification makes sense for health. Overall one distinguishes three categories of processes: mechanical, thermal, and fermentative treatments, this latter being the more favorable to food health potential. This chapter has therefore several ambitions: (1) to review association between degree of food processing and chronic disease risk prevalence; (2) to explore the impact of technological processes on food health potential considering both matrix and compositional effects; (3) to discuss the need for classifying food according to their degree of processing in future epidemiological studies; and (4) to analyze consequences of adhering to a more holistic paradigm in both food processing and nutrition. © 2018 Elsevier Inc. All rights reserved.

  7. The Ideal Criteria of Supplier Selection for SMEs Food Processing Industry

    Ramlan Rohaizan

    2016-01-01

    Full Text Available Selection of good supplier is important to determine the performance and profitability of SMEs food processing industry. The lack of managerial capability on supplier selection in SMEs food processing industry affects the competitiveness of SMEs food processing industry. This research aims to determine the ideal criteria of supplier for food processing industry using Analytical Hierarchy Process (AHP. The research was carried out in a quantitative method by distributing questionnaires to 50 SMEs food processing industries. The collected data analysed using Expert Choice software to rank the supplier selection criteria. The result shows that criteria for supplier selection are ranked by cost, quality, service, delivery and management and organisation while purchase cost, audit result, defect analysis, transportation cost and fast responsiveness are the first five sub-criteria. The result of this research intends to improve managerial capabilities of SMEs food processing industry in supplier selection.

  8. The pilot plant for electron beam food processing

    Migdal, W.; Stachowicz, W.

    1993-01-01

    The investigations on food irradiation began in Poland in the end of 50-ties. Till the end of 70-ties the research activity on food irradiation was rather of the random nature and the objectives involved the fundamental research areas of food science. After the JECFI recommended in 1980 the general approval of foods treated with the doses of ionizing radiation up to 10 kG as unconditionally wholesome, the interest on practical application of food irradiation was gained in Poland. In 1986 the governmental bodies decided to recognize the possibilities of practical application of radiation techniques in agriculture, and the Central Research and Development Project No 10.13. ''Radiation Techniques in Agriculture'' was initiated for the period of 5 years. The project in the part that refers to food irradiations involved 3 major objectives: - radiation preservation of food; - radiation hygienization of animal feed; - Pilot plants for food irradiation. The most liable project of the programme was the construction of experimental plant for electron beam food irradiation, intended to be the national center for future testing and implementary works in this field. (orig.)

  9. Nanotechnology in food processing sector-An assessment of emerging trends.

    Kalpana Sastry, R; Anshul, Shrivastava; Rao, N H

    2013-10-01

    Use of nanoscience based technology in the food industry is fast emerging as new area for research and development. Several research groups including private companies in the industry have initiated research programmes for exploring the wide scope of nanotechnology into the value chain of food processing and manufacturing. This paper discusses the current focus of research in this area and assesses its potential impacts. Using the developed relational database framework with R&D indicators like literature and patent documents for assessment of the potential of nanotechnology in food sector, a model to organize and map nanoresearch areas to the food processing sector was developed. The study indicates that the about five basic categories of nanotechnology applications and functionalities currently in the development of food sector, include food processing, packaging, nutraceuticals delivery, food safety and functional foods.

  10. Fast or slow-foods? Describing natural variations in oral processing characteristics across a wide range of Asian foods.

    Forde, C G; Leong, C; Chia-Ming, E; McCrickerd, K

    2017-02-22

    The structural properties of foods have a functional role to play in oral processing behaviours and sensory perception, and also impact on meal size and the experience of fullness. This study adopted a new approach by using behavioural coding analysis of eating behaviours to explore how a range of food textures manifest as the microstructural properties of eating and expectations of fullness. A selection of 47 Asian foods were served in fixed quantities to a panel of participants (N = 12) and their eating behaviours were captured via web-camera recordings. Behavioural coding analysis was completed on the recordings to extract total bites, chews and swallows and cumulative time of the food spent in the mouth. From these measurements a series of microstructural properties including average bite size (g), chews per bite, oro-sensory exposure time (seconds) and average eating rate (g min -1 ) were derived per food. The sensory and macronutrient properties of each food were correlated with the microstructure of eating to compare the differences in eating behaviour on a gram for gram basis. There were strong relationships between the perceived food textural properties and its eating behaviours and a food's total water content was the best predictor of its eating rate. Foods that were eaten at a slower eating rate, with smaller bites and more chews per bite were rated as higher in the expected fullness. These relationships are important as oral processing behaviours and beliefs about the potential satiating value of food influence portion decisions and moderate meal size. These data support the idea that naturally occurring differences in the food structure and texture could be used to design meals that slow the rate of eating and maximise fullness.

  11. Household availability of ultra-processed foods and obesity in nineteen European countries.

    Monteiro, Carlos Augusto; Moubarac, Jean-Claude; Levy, Renata Bertazzi; Canella, Daniela Silva; Louzada, Maria Laura da Costa; Cannon, Geoffrey

    2018-01-01

    To assess household availability of NOVA food groups in nineteen European countries and to analyse the association between availability of ultra-processed foods and prevalence of obesity. Ecological, cross-sectional study. Europe. Estimates of ultra-processed foods calculated from national household budget surveys conducted between 1991 and 2008. Estimates of obesity prevalence obtained from national surveys undertaken near the budget survey time. Across the nineteen countries, median average household availability amounted to 33·9 % of total purchased dietary energy for unprocessed or minimally processed foods, 20·3 % for processed culinary ingredients, 19·6 % for processed foods and 26·4 % for ultra-processed foods. The average household availability of ultra-processed foods ranged from 10·2 % in Portugal and 13·4 % in Italy to 46·2 % in Germany and 50·4 % in the UK. A significant positive association was found between national household availability of ultra-processed foods and national prevalence of obesity among adults. After adjustment for national income, prevalence of physical inactivity, prevalence of smoking, measured or self-reported prevalence of obesity, and time lag between estimates on household food availability and obesity, each percentage point increase in the household availability of ultra-processed foods resulted in an increase of 0·25 percentage points in obesity prevalence. The study contributes to a growing literature showing that the consumption of ultra-processed foods is associated with an increased risk of diet-related non-communicable diseases. Its findings reinforce the need for public policies and actions that promote consumption of unprocessed or minimally processed foods and make ultra-processed foods less available and affordable.

  12. Consumption of ultra-processed foods and body fat during childhood and adolescence: a systematic review.

    Costa, Caroline Santos; Del-Ponte, Bianca; Assunção, Maria Cecília Formoso; Santos, Iná Silva

    2018-01-01

    To review the available literature on the association between consumption of ultra-processed foods and body fat during childhood and adolescence. A systematic review was conducted in the PubMed, Web of Science and LILACS databases. Studies that evaluated the association between consumption of ultra-processed food (exposure) and body fat (outcome) during childhood and adolescence were eligible. Healthy children and adolescents. Twenty-six studies that evaluated groups of ultra-processed foods (such as snacks, fast foods, junk foods and convenience foods) or specific ultra-processed foods (soft drinks/sweetened beverages, sweets, chocolate and ready-to-eat cereals) were selected. Most of the studies (n 15) had a cohort design. Consumption was generally evaluated by means of FFQ or food records; and body composition, by means of double indirect methods (bioelectrical impedance analysis and skinfolds). Most of the studies that evaluated consumption of groups of ultra-processed foods and soft drinks/sweetened beverages found positive associations with body fat. Our review showed that most studies have found positive associations between consumption of ultra-processed food and body fat during childhood and adolescence. There is a need to use a standardized classification that considers the level of food processing to promote comparability between studies.

  13. Trends in consumption of ultra-processed foods and obesity in Sweden between 1960 and 2010.

    Juul, Filippa; Hemmingsson, Erik

    2015-12-01

    To investigate how consumption of ultra-processed foods has changed in Sweden in relation to obesity. Nationwide ecological analysis of changes in processed foods along with corresponding changes in obesity. Trends in per capita food consumption during 1960-2010 were investigated using data from the Swedish Board of Agriculture. Food items were classified as group 1 (unprocessed/minimally processed), group 2 (processed culinary ingredients) or group 3 (3·1, processed food products; and 3·2, ultra-processed products). Obesity prevalence data were pooled from the peer-reviewed literature, Statistics Sweden and the WHO Global Health Observatory. Nationwide analysis in Sweden, 1960-2010. Swedish nationals aged 18 years and older. During the study period consumption of group 1 foods (minimal processing) decreased by 2 %, while consumption of group 2 foods (processed ingredients) decreased by 34 %. Consumption of group 3·1 foods (processed food products) increased by 116 % and group 3·2 foods (ultra-processed products) increased by 142 %. Among ultra-processed products, there were particularly large increases in soda (315 %; 22 v. 92 litres/capita per annum) and snack foods such as crisps and candies (367 %; 7 v. 34 kg/capita per annum). In parallel to these changes in ultra-processed products, rates of adult obesity increased from 5 % in 1980 to over 11 % in 2010. The consumption of ultra-processed products (i.e. foods with low nutritional value but high energy density) has increased dramatically in Sweden since 1960, which mirrors the increased prevalence of obesity. Future research should clarify the potential causal role of ultra-processed products in weight gain and obesity.

  14. The Final Development Related Microbial Pigments and the Application in Food Industry

    YANGILAR, Filiz; YILDIZ, Pınar OGUZHAN

    2016-01-01

    The successful marketing of natural pigments derived from microorganisms and microalgae or extracted from flowering plants, both as food colorants and nutritional supplements, reflects the presence, and importance of markets in which consumers are willing to pay a premium for “natural healthy ingredients”. As known, pigments prefer in natural products have antioxidant, antimicrobial and antimutagenic activities. The most commonly used food grade pigments are chemical compounds containing nitr...

  15. Control of final moisture content of food products baked in continuous tunnel ovens

    McFarlane, Ian

    2006-02-01

    There are well-known difficulties in making measurements of the moisture content of baked goods (such as bread, buns, biscuits, crackers and cake) during baking or at the oven exit; in this paper several sensing methods are discussed, but none of them are able to provide direct measurement with sufficient precision. An alternative is to use indirect inferential methods. Some of these methods involve dynamic modelling, with incorporation of thermal properties and using techniques familiar in computational fluid dynamics (CFD); a method of this class that has been used for the modelling of heat and mass transfer in one direction during baking is summarized, which may be extended to model transport of moisture within the product and also within the surrounding atmosphere. The concept of injecting heat during the baking process proportional to the calculated heat load on the oven has been implemented in a control scheme based on heat balance zone by zone through a continuous baking oven, taking advantage of the high latent heat of evaporation of water. Tests on biscuit production ovens are reported, with results that support a claim that the scheme gives more reproducible water distribution in the final product than conventional closed loop control of zone ambient temperatures, thus enabling water content to be held more closely within tolerance.

  16. Combination of preservation factors applied to minimal processing of foods.

    Tapia de Daza, M S; Alzamora, S M; Chanes, J W

    1996-07-01

    Innovative technologies for producing minimally processed (MP) foods that apply the concept of combination of preservation factors are addressed in this article with special emphasis on a new combined approach that has been successfully applied in several Latin American countries for MP high-moisture fruit products (HMFP). HMFP can be regarded as a different approach to the commercially available and widely accepted MP concept for fruits and vegetables (even if developed for the same purpose of obtaining freshlike high-quality products with an extended shelf life) that is better adapted to Latin American countries in terms of independence of the chill chain and the use of simple and energy-efficient technologies. The continuous refrigeration hurdle associated with MP refrigerated fruits is not included in the preservation system of HMFP because a different combination of hurdles must be overcome to enhance the shelf stability of nonrespiring vegetable tissues while preserving freshlike character. Guidelines to obtain safe and high-quality MP fruit products are proposed. Other products preserved by combined factors technology are also discussed, as well as some other classical and new preservation factors whose application could enhance the quality of HMFP.

  17. Immunomodulatory Effects of Soybeans and Processed Soy Food Compounds.

    Tezuka, Hiroyuki; Imai, Shinjiro

    2015-01-01

    Inflammation is an immune response against both internal and external antigens in organisms, particularly in mammals, and includes both uncontrolled chronic and low-grade inflammations. Uncontrolled chronic inflammation often leads to severe diseases such as vascular disease, arthritis, cancer, diabete, allergy, and autoimmunity. On the other hand, low-grade inflammation is recognized as a relationship between obesity and risk of metabolic syndrome. Elevated production of pro-inflammatory cytokines and mediators is commonly observed in patients with uncontrolled or low-grade inflammation-associated diseases. Plants have been generated phytochemicals to overcome inflammations and infections through evolution. Phytochemicals belong to alkaloids, polyphenols, flavonoids, coumarins, and terpenoids. The consumption of soybeans plays a role in immune modulation through their components such as isoflavones, saponins, and anthocyanins. Recently, it was reported that the application of phytochemicals into patients with inflammatory diseases improves their symptoms. Therefore, it is important to identify novel phytochemicals with immunomodulatory activities. This review introduces and discusses recent advances and patents regarding soybean or processed soy food compounds which exhibit immunomodulatory activity in immune diseases, particularly allergy, by mediating the suppression of inflammatory pathways.

  18. Analysis of Total Food Intake and Composition of Individual's Diet Based on the U.S. Department of Agriculture's 1994-96, 1998 Continuing Survey of Food Intakes by Individuals (CSFII) (2005, Final Report)

    EPA released the final report, Analysis of Total Food Intake and Composition of Individual’s Diet Based on USDA’s 1994-1996, 98 Continuing Survey of Food Intakes by Individuals (CSFII). The consumption of food by the general population is a significant route of potential ...

  19. Processed foods and the consumer: additives, labeling, standards, and nutrition

    Packard, Vernal S

    1976-01-01

    ... supplements; and it brings together under one cover the health-related issues of food additives and nutrition. If I were to point to one objective of this work, it would be to guide student and consumer alike through the maze of food ingredients, regulations, and standards in order to make as clear as present knowledge allows the critical issues co...

  20. Competing sovereignties, contested processes : The politics of food sovereignty construction

    C. McGee Schiavoni (Christina)

    2014-01-01

    textabstractThis study provides a preliminary theoretical and empirical exploration into how ‘competing sovereignties’ are shaping the political construction of food sovereignty—broadly defined as ‘the right of peoples to healthy and culturally appropriate food produced through ecologically sound

  1. Development of food preservation and processing techniques by radiation

    Byun, Myung Woo; Yook, Hong Sun; Lee, Ju Woon and others

    1999-03-01

    Development of food preservation and processing techniques by radiation was performed. Gamma irradiation at 2-10 kGy is considered to be an effective method to control pathogenic bacteria in species including Escherichia coli O157:H7. Gamma irradiation at 5 kGy completely eliminated pathogenic bacteria in beef. Gamma irradiation at such doses and subsequent storage at less than 4 deg C could ensure hygienic quality and prolong the microbiological shelf-life resulting from the reduction of spoilage microorganisms. Gamma irradiation on pre-rigor beef shortens the aging-period, improves tenderness and enhances the beef quality. And, a new beef processing method using gamma irradiation, such as in the low salt sausage and hygienic beef patty was developed. Safety tests of gamma-irradiated meats(beefs: 0-5 kGy; porks: 0-30 kGy) in areas such as genotoxicity, acute toxicity, four-week oral toxicity, rat hepato carcinogenesis and the anti oxidative defense system, were not affected by gamma irradiation. To pre-establish an alternative technique to the toxic fumigant, methyl bromide, which is the current quarantine measure of agricultural products for export and import, some selected agricultural products, such as chestnuts, acorns, red beans and mung beans, were subjected to a preliminary study to confirm the comparative effects of gamma irradiation and MBr fumigant on their disinfestation and quality, thereby preparing the basic data for the practical approach.Current fumigation(MBr) was perfect in its disinfecting capability, but it caused detrimental effects on the physical quality of agricultural produce. However, irradiation doses suitable for controlling pests did not induce any significant changes in the quality of the products. (author)

  2. Degradation of endogenous and exogenous genes of genetically modified rice with Cry1Ab during food processing.

    Zhang, Wei; Xing, Fuguo; Selvaraj, Jonathan Nimal; Liu, Yang

    2014-05-01

    In order to assess the degradation of endogenous and exogenous genes during food processing, genetically modified rice with Cry1Ab was used as raw material to produce 4 processed foods: steamed rice, rice noodles, rice crackers, and sweet rice wine. The results showed various processing procedures caused different degrees of degradation of both endogenous and exogenous genes. During the processing of steamed rice and rice noodles, the procedures were so mild that only genes larger than 1500 bp were degraded, and no degradation of NOS terminator and Hpt gene was detected. For rice crackers, frying was the most severe procedure, followed by microwaving, baking, boiling, 1st drying, and 2nd drying. For sweet rice wine, fermentation had more impact on degradation of genes than the other processing procedures. All procedures in this study did not lead to degradation of genes to below 200 bp, except for NOS terminator. In the case of stability of the genes studied during processing of rice crackers and sweet rice wine, SPS gene was the most, followed by the Cry1Ab gene, Hpt gene, Pubi promoter, and NOS terminator. In our study, we gained some information about the degradation of endogenous and exogenous genes during 4 foods processing, compared the different stabilities between endogenous and exogenous genes, and analyzed different effects of procedure on degradation of genes. In addition, the fragments of endogenous and exogenous genes about 200 bp could be detected in final products, except NOS terminator. As a result, we provided some base information about risk assessment of genetically modified (GM) food and appropriate length of fragment to detect GM component in processed foods. © 2014 Institute of Food Technologists®

  3. The Relationships between Selection and Processing Food with Escherichia coli Contaminant on Food Stall Serving

    Tris Eryando

    2014-04-01

    Full Text Available Escherichia coli in food stalls surrounding the X Campuss in Depok, year 2012. The research conducted to examine food safety, which were served in surrounding the campus X in Depok. Escherichia coli (E. coli existence was used to indicate the quality of hygiene and sanitation of the food that was served. Using the cross sectional method, the research examined the persons who served the food to be sold in the food stalls in the campus. There were 173 food servers chosen as the respondents from 10 different food stalls around the university. The existence of E. coli examined in the microbiology laboratory in the Faculty of Public Health. Using the most probable number (MPN method found that 59.54% of the food served in the campus were contaminated E. coli. Factors affecting the existence of E. coli were the raw materials (vegetables treated and the length of cooking of the materials (rice/beens. The improper treatment such as washing with no running water or even unwashed vegetables had 5 times risk of the E. coli contamination. Cooking less than 15 minutes was also more risky than cooking more than 15 minutes. As a result, this is very important to find a method to improve knowledge and to increase practical skills in food safety. Furthermore, in this research area may give contribution to avoid E. coli contamination which will prevent unnecessary illness among students in the campus.

  4. New vision technology for multidimensional quality monitoring of food processes

    Dissing, Bjørn Skovlund

    be generated using this inductive analytical approach. For the food industry it is an additional advantage that the fast, non-invasive, remote sensing nature of the spectroscopic imaging methods allows on-line measurements. In this way spectroscopic imaging in combination with advanced data analysis meets......Spectroscopy and spectral imaging in combination with multivariate data analysis and machine learning techniques have proven to be an outstanding tool for rapid analysis of different products. This may be utilized in various industries, but especially rapid assessment of food products in food...... research and industry is of importance in this thesis. The non-invasive spectroscopic imaging techniques are able to measure individual food components simultaneously in situ in the food matrix while pattern recognition techniques effectively are able to extract the quantitative information from the vast...

  5. Energy saving processes for nitrogen removal in organic wastewater from food processing industries in Thailand.

    Johansen, N H; Suksawad, N; Balslev, P

    2004-01-01

    Nitrogen removal from organic wastewater is becoming a demand in developed communities. The use of nitrite as intermediate in the treatment of wastewater has been largely ignored, but is actually a relevant energy saving process compared to conventional nitrification/denitrification using nitrate as intermediate. Full-scale results and pilot-scale results using this process are presented. The process needs some additional process considerations and process control to be utilized. Especially under tropical conditions the nitritation process will round easily, and it must be expected that many AS treatment plants in the food industry already produce NO2-N. This uncontrolled nitrogen conversion can be the main cause for sludge bulking problems. It is expected that sludge bulking problems in many cases can be solved just by changing the process control in order to run a more consequent nitritation. Theoretically this process will decrease the oxygen consumption for oxidation by 25% and the use of carbon source for the reduction will be decreased by 40% compared to the conventional process.

  6. Consumption of ultra-processed foods and obesity in Brazilian adolescents and adults.

    Louzada, Maria Laura da Costa; Baraldi, Larissa Galastri; Steele, Euridice Martinez; Martins, Ana Paula Bortoletto; Canella, Daniela Silva; Moubarac, Jean-Claude; Levy, Renata Bertazzi; Cannon, Geoffrey; Afshin, Ashkan; Imamura, Fumiaki; Mozaffarian, Dariush; Monteiro, Carlos Augusto

    2015-12-01

    The aim of this study was to evaluate the relationship between the consumption of ultra-processed foods and obesity indicators among Brazilian adults and adolescents. We used cross-sectional data on 30,243 individuals aged ≥10 years from the 2008-2009 Brazilian Dietary Survey. Food consumption data were collected through 24-h food records. We classified food items according to characteristics of food processing. Ultra-processed foods were defined as formulations made by the food industry mostly from substances extracted from foods or obtained with the further processing of constituents of foods or through chemical synthesis, with little if any whole food. Examples included candies, cookies, sugar-sweetened beverages, and ready-to-eat dishes. Regression models were fitted to evaluate the association of the consumption of ultra-processed foods (% of energy intake) with body-mass-index, excess weight, and obesity status, controlling for socio-demographic characteristics, smoking, and physical activity. Ultra-processed foods represented 30% of the total energy intake. Those in the highest quintile of consumption of ultra-processed foods had significantly higher body-mass-index (0.94 kg/m(2); 95% CI: 0.42,1.47) and higher odds of being obese (OR=1.98; 95% CI: 1.26,3.12) and excess weight (OR=1.26; 95% CI: 0.95,1.69) compared with those in the lowest quintile of consumption. Our findings support the role of ultra-processed foods in the obesity epidemic in Brazil. Copyright © 2015 Elsevier Inc. All rights reserved.

  7. Influence of oral processing on appetite and food intake - A systematic review and meta-analysis.

    Krop, EM; Hetherington, MM; Nekitsing, C; Miquel, S; Postelnicu, L; Sarkar, A

    2018-01-01

    Food delivers energy, nutrients and a pleasurable experience. Slow eating and prolonged oro-sensory exposure to food during consumption can enhance the processes that promote satiation. This systematic review and meta-analysis investigated the effects of oral processing on subjective measures of appetite (hunger, desire to eat) and objectively measured food intake. The aim was to investigate the influence of oral processing characteristics, specifically "chewing" and "lubrication", on "appeti...

  8. Lipase catalyzed ester synthesis for food processing industries

    Aravindan Rajendran

    2009-02-01

    Full Text Available Lipases are one of the most important industrial biocatalyst which catalyzes the hydrolysis of lipids. It can also reverse the reaction at minimum water activity. Because of this pliable nature, it is widely exploited to catalyze the diverse bioconversion reactions, such as hydrolysis, esterification, interesterification, alcoholysis, acidolysis and aminolysis. The property to synthesize the esters from the fatty acids and glycerol promotes its use in various ester synthesis. The esters synthesized by lipase finds applications in numerous fields such as biodiesel production, resolution of the recemic drugs, fat and lipid modification, flavour synthesis, synthesis of enantiopure pharmaceuticals and nutraceuticals. It plays a crucial role in the food processing industries since the process is unaffected by the unwanted side products. Lipase modifications such as the surfactant coating, molecular imprinting to suit for the non-aqueous ester synthesis have also been reported. This review deals with lipase catalyzed ester synthesis, esterification strategies, optimum conditions and their applications in food processing industries.Lipases são catalizadores industriais dos mais importantes, os quais catalizam a hidrólise de lipídeos. Também podem reverter a reação a um mínimo de atividade de água. Devido sua natureza flexível, é amplamente explorada para catalizar uma diversidade de reações de bioconversão como hidrólise, esterificação, interesterificação, alcoólise, acidólise e aminólise. A propriedade de síntese de esteres a partir de ácidos graxos e glicerol promoveu seu uso em várias sínteses de esteres. Os esteres sintetizados por lipases encontram aplicação em numerosos campos como a produção de biodiesel, resolução de drogas racêmicas, modificação de gorduras e lipídios, sintese de aromas, síntese de produtos farmacêuticos enantiopuro e nutracêuticos. As lipases possuem um papel crucial nas indústrias de

  9. Children's food choice process in the home environment. A qualitative descriptive study.

    Holsten, Joanna E; Deatrick, Janet A; Kumanyika, Shiriki; Pinto-Martin, Jennifer; Compher, Charlene W

    2012-02-01

    This qualitative descriptive study explored children's food choices in the home with particular attention to environmental influences. Semi-structured interviews were conducted with 11- to 14-year-old children (n=47) from one middle school. A data-driven content analysis using selected principles of grounded theory was performed. Children's food choices in the home emerged as a process that involved three interacting components, the child, the parent, and the food, embedded within the context of time. Children's structured activities throughout the day, week, and year provided an overall context for food choices. Parents affected children's food choices through their presence in the home, time pressure and activity prioritization, incorporation of family members' preferences, food preparation effort and skills, and financial and health concerns. Parents created food options through food purchasing and preparation and indirectly affected children's food choices by setting rules, providing information, and modeling behaviors. Children affected parents' decisions by communicating food preferences. For children, important aspects of the food itself included its availability at home and attributes related to taste, preparation, and cost. Children evaluated potential food options based on their hunger level, food preferences, time pressure and activity prioritization, food preparation effort and skills, and expected physical consequences of food. Copyright © 2011 Elsevier Ltd. All rights reserved.

  10. Health protection and food preservation by gamma irradiation. Final report, may 1976

    1976-05-01

    Results of several major studies on food systems for space missions beginning with Apollo 12 through Apollo-Soyuz and investigations of the application of irradiation to food for manned space flight are reported. The study of flight food systems involved the application of radurization (pasteurizing levels) doses of gamma irradiation to flour and bread supplied by Pepperidge Farms in advance of the missions. All flights from Apollo 12 through 17 carried irradiated fresh bread. On Apollo 17, cooperation with Natick Laboratories permitted the introduction of a ham sandwich using irradiated bread and irradiated sterile ham. Investigations centered on irradiated bread were conducted during the course of these missions. Studies were applied to the concept of improving fresh bread from the point of view of mold inhibition. The studies considered how irradiation could best be applied at what levels and on a variety of bread types. Throughout the studies of the application of gamma irradiation the emphasis was placed upon using low levels of irradiation in the pasteurizing or radurizing doses--under a Megarad. The primary goal was to determine if a public health benefit could be demonstrated using radurization along with food preservation and food quality improvements. The public health benefit would be parallel to that of pasteurization of milk as a concept. Publications are included providing the details of these observations, one dealing with the flour characteristics and the other dealing with the influence on fresh bread types. These demonstrate the major findings noted during the period of the studies examining bread. (Author)

  11. Entrepreneurial Interest in Product Innovation-based Organic Processed Food in SMEs in Malang, Indonesia

    Sri Muljaningsih

    2015-01-01

    The underlying reason for conducting the study is need for organic processed food. Producing innovative organic processed food is not an easy task since it requires creativity. The statement of the problem is how to create entrepreneurial interest to produce organic processed food. The study is a qualitative study of which purpose is to describe organic processed food SMEs behavior. There are 7 (seven) informants involved in the study. The setting of the study is SMEs in “Lily go to organic G...

  12. The influence of oral processing, food perception and social aspects on food consumption: a review

    Pereira, L. J.; Van der Bilt, A.

    Eating is an essential activity to get energy and necessary nutrients for living. While chewing, the food is broken down by the teeth and dissolved by saliva. Taste, flavour and texture are perceived during chewing and will contribute to the appreciation of the food. The senses of taste and smell

  13. Allergenicity in food allergy : influence of food processing and immunomodulation by lactic acid bacteria

    Vissers, Y.M.

    2011-01-01


    Allergic diseases such as allergic rhinitis, allergic asthma, atopic eczema and food allergy have become an increasing health problem world-wide, affecting between 20-30% of the total population. Peanut allergy (prevalence ~1%) is a common and persistent food allergy accounting for severe

  14. Functional food productions: release the potential of bioactive compounds through food processing

    Epidemiological studies of bioactive compounds from plant-based foods have consistently pointed to undisputed benefits of consumption of plant-based foods on human health particularly regarding cardiovascular diseases and cancers. However, in order to attain the dosage required from these studies, p...

  15. Green Pea and Garlic Puree Model Food Development for Thermal Pasteurization Process Quality Evaluation.

    Bornhorst, Ellen R; Tang, Juming; Sablani, Shyam S; Barbosa-Cánovas, Gustavo V; Liu, Fang

    2017-07-01

    Development and selection of model foods is a critical part of microwave thermal process development, simulation validation, and optimization. Previously developed model foods for pasteurization process evaluation utilized Maillard reaction products as the time-temperature integrators, which resulted in similar temperature sensitivity among the models. The aim of this research was to develop additional model foods based on different time-temperature integrators, determine their dielectric properties and color change kinetics, and validate the optimal model food in hot water and microwave-assisted pasteurization processes. Color, quantified using a * value, was selected as the time-temperature indicator for green pea and garlic puree model foods. Results showed 915 MHz microwaves had a greater penetration depth into the green pea model food than the garlic. a * value reaction rates for the green pea model were approximately 4 times slower than in the garlic model food; slower reaction rates were preferred for the application of model food in this study, that is quality evaluation for a target process of 90 °C for 10 min at the cold spot. Pasteurization validation used the green pea model food and results showed that there were quantifiable differences between the color of the unheated control, hot water pasteurization, and microwave-assisted thermal pasteurization system. Both model foods developed in this research could be utilized for quality assessment and optimization of various thermal pasteurization processes. © 2017 Institute of Food Technologists®.

  16. The influence of oral processing, food perception and social aspects on food consumption: a review.

    Pereira, L J; van der Bilt, A

    2016-08-01

    Eating is an essential activity to get energy and necessary nutrients for living. While chewing, the food is broken down by the teeth and dissolved by saliva. Taste, flavour and texture are perceived during chewing and will contribute to the appreciation of the food. The senses of taste and smell play an important role in selecting nutritive food instead of toxic substances. Also visual information of a food product is essential in the choice and the acceptance of food products, whereas auditory information obtained during the chewing of crispy products will provide information on whether a product is fresh or stale. Food perception does not just depend on one individual sense, but appears to be the result from multisensory integration of unimodal signals. Large differences in oral physiology parameters exist among individuals, which may lead to differences in food perception. Knowledge of the interplay between mastication and sensory experience for groups of individuals is important for the food industry to control quality and acceptability of their products. Environment factors during eating, like TV watching or electronic media use, may also play a role in food perception and the amount of food ingested. Distraction during eating a meal may lead to disregard about satiety and fullness feelings and thus to an increased risk of obesity. Genetic and social/cultural aspects seem to play an important role in taste sensitivity and food preference. Males generally show larger bite size, larger chewing power and a faster chewing rhythm than females. The size of swallowed particles seems to be larger for obese individuals, although there is no evidence until now of an 'obese chewing style'. Elderly people tend to have fewer teeth and consequently a less good masticatory performance, which may lead to lower intakes of raw food and dietary fibre. The influence of impaired mastication on food selection is still controversial, but it is likely that it may at least cause

  17. Pathogenic psychrotolerant sporeformers: an emerging challenge for low-temperature storage of minimally processed foods.

    Markland, Sarah M; Farkas, Daniel F; Kniel, Kalmia E; Hoover, Dallas G

    2013-05-01

    Sporeforming bacteria are a significant problem in the food industry as they are ubiquitous in nature and capable of resisting inactivation by heat and chemical treatments designed to inactivate them. Beyond spoilage issues, psychrotolerant sporeformers are becoming increasingly recognized as a potential hazard given the ever-expanding demand for refrigerated processed foods with extended shelf-life. In these products, the sporeforming pathogens of concern are Bacillus cereus, Bacillus weihenstephanensis, and Clostridium botulinum type E. This review article examines the foods, conditions, and organisms responsible for the food safety issue caused by the germination and outgrowth of psychrotolerant sporeforming pathogens in minimally processed refrigerated foods.

  18. APPRAISAL OF FINAL TAILINGS APPLICABILITY FOR PROCESSING AND PRODUCTION OF MODIFIERS OF IRON-CARBON ALLOYS

    A. S. Panasugin

    2011-01-01

    Full Text Available The methodology of rating of the galvanic final tailings applicability for further processing in the interests of needs of metallurgical production of the Republic Belarus is offered.

  19. Effects of reducing processed culinary ingredients and ultra-processed foods in the Brazilian diet: a cardiovascular modelling study.

    Moreira, Patrícia Vl; Hyseni, Lirije; Moubarac, Jean-Claude; Martins, Ana Paula B; Baraldi, Larissa G; Capewell, Simon; O'Flaherty, Martin; Guzman-Castillo, Maria

    2018-01-01

    To estimate the impact of reducing saturated fat, trans-fat, salt and added sugar from processed culinary ingredients and ultra-processed foods in the Brazilian diet on preventing cardiovascular deaths by 2030. A modelling study. Data were obtained from the Brazilian Household Budget Survey 2008/2009. All food items purchased were categorized into food groups according to the NOVA classification. We estimated the energy and nutrient profile of foods then used the IMPACT Food Policy model to estimate the reduction in deaths from CVD up to 2030 in three scenarios. In Scenario A, we assumed that the intakes of saturated fat, trans-fat, salt and added sugar from ultra-processed foods and processed culinary ingredients were reduced by a quarter. In Scenario B, we assumed a reduction of 50 % of the same nutrients in ultra-processed foods and processed culinary ingredients. In Scenario C, we reduced the same nutrients in ultra-processed foods by 75 % and in processed culinary ingredients by 50 %. Approximately 390 400 CVD deaths might be expected in 2030 if current mortality patterns persist. Under Scenarios A, B and C, CVD mortality can be reduced by 5·5, 11·0 and 29·0 %, respectively. The main impact is on stroke with a reduction of approximately 6·0, 12·6 and 32·0 %, respectively. Substantial potential exists for reducing the CVD burden through overall improvements of the Brazilian diet. This might require reducing the penetration of ultra-processed foods by means of regulatory policies, as well as improving the access to and promotion of fresh and minimally processed foods.

  20. Food processing as an agricultural countermeasure after an accidental contamination event

    Igreja, Eduardo; Rochedo, Elaine R.R.; Prado, Nadya M.P.D.; Silva, Diogo N.G.

    2013-01-01

    Food processing allows significant reduction in the radionuclide contamination of foodstuffs. The effects of processing on contaminated food depend on the radionuclide, the type of foodstuff and the method of processing. The effectiveness of radionuclide removal from raw material during processing can vary widely; however, processing of raw materials of vegetable and animal origin is often considered one of the most effective countermeasures for reducing the radioactive contamination of the foodstuff to or below permissible levels, and can be applied both domestically and in industrial processing of food. The food processing retention factor, Fr, is the fraction of radionuclide activity that is retained in the food after processing; it is obtained by the product of two quantities, the processing efficiency, Pe, that is the ratio of the fresh weight of the processed food to the weight of the original raw material, and the processing factor, Pf, that is the ratio of the radionuclide activity concentrations in the processed and in the raw material. The objective of this work was to investigate the effect of the reduction in dose due to food processing after a nuclear or radiological accident. Radionuclides considered were Cs-137, Sr-90 and I-131. The effect on total diet of individuals was investigating for a typical diet of the Southeast region, where the Brazilian Nuclear Power Plants are located. The effect was analyzed considering the use of the processing technologies after contamination events occurring in different seasons of the year. (author)

  1. Food for Thought: Recommendations to Improve the Relationship between the City of Los Angeles and its Food Processing Sector

    Marian Fowler; Rachel Freitas; Jessica Nierenberg; Diana Simpson

    2004-01-01

    Since the 1980s, the manufacturing sector has been steadily declining in Los Angeles, weakening the fabric of the community, diminishing the tax base, decreasing the amount of revenue available for social services, and reducing property values. To address these problems, the City is targeting industry clusters that are growing and for which the City provides a competitive advantage. The Food Processing industry, composed of manufacturers, producers, and packagers of food and beverages fo...

  2. Postprandial energy expenditure in whole-food and processed-food meals: implications for daily energy expenditure

    Wright, Jonathan C.; Barr, Sadie B.

    2010-01-01

    Background: Empirical evidence has shown that rising obesity rates closely parallel the increased consumption of processed foods (PF) consumption in USA. Differences in postprandial thermogenic responses to a whole-food (WF) meal vs. a PF meal may be a key factor in explaining obesity trends, but currently there is limited research exploring this potential link. Objective: The goal was to determine if a particular PF meal has a greater thermodynamic efficiency than a comparable WF meal, there...

  3. Radiation chemistry - extravaganza or an integral component of radiation processing of food

    Simic, M.G.; DeGraff, E.

    1983-01-01

    The role of radiation chemistry in radiation processing of foods is discussed in detail. A few examples demonstrating the relevance of the radiation chemistry of model systems to food-irradiation technology are given. The importance of irradiation parameters such as dose, dose rate, temperature, atmosphere, physical state and additives in achieving acceptable and high quality of irradiated foods are emphasized. A few examples of radiation-induced free radical reactions in model compounds relevant to foods are also discussed. (author)

  4. Sustainable Approach for Landfill Management at Final Processing Site Cikundul in Sukabumi City, Indonesia

    Sri Darwati

    2012-01-01

    The main problem of landfill management in Indonesia is the difficulty in getting a location for Final Processing Sites (FPS) due to limited land and high land prices. Besides, about 95% of existing landfills are uncontrolled dumping sites, which could potentially lead to water, soil and air pollution. Based on data from the Ministry of Environment (2010), The Act of the Republic of Indonesia Number 18 Year 2008 Concerning Solid Waste Management, prohibits open dumping at final processing sit...

  5. Balance of Comparative Advantages in the Processed Food Sector of the Danube Countries

    Svetlana Ignjatijević

    2015-05-01

    Full Text Available In this paper, we investigated the level of competitiveness of the processed food sector of the Danube region countries, in order to show the existence of comparative advantage and the correlation of exports. We used the Balassa (RCA–revealed comparative advantage index and TPI (trade performance indexes. At first, using the Pearson and Spearman index, we examined the existence of correlations between the processed food sector of the Danube countries. Then, we applied the Least Significant Difference (LSD test to further compare the value and answered the question: between which Danube countries are there significant differences? With the study, we found that the distribution of the RCA index in Bosnia and Herzegovina, Hungary, Moldova and Slovenia deviates from normality. We also found the existence of a strong correlation of the RCA index of the Czech Republic with Romania, Hungary with Moldova and Serbia, Moldova with Serbia and Bulgaria with Ukraine. Finally, we concluded that the development of trade in the countries of the Danube region requires the participation of all relevant interest groups and could play an important role in providing faster economic development, that is in achieving sustainable development of the countries, with the sustainable use of available resources.

  6. Dosimetry concepts and measurements in food irradiation processing

    Chadwick, K.H.; Oosterheert, W.F.

    1986-01-01

    The associations between the dosimetry concepts, Minimum absorbed dose (Dsub(min)), maximum absorbed dose (Dsub(max), and average dose and median dose are investigated for the case of a large cobalt-60 plaque source irradiating homogeneous bulk product in a two-pass, two-sided irradiation. It is assumed that to a first approximation the intensity of radiation decreases exponentially with the depth, t, in the product. A series of mathematical relationships is derived for the average dose, the maximum and minimum dose, the median dose [defined as (Dsub(maX) + Dsub(min)/2], and the uniformity ratio (defined U.R. = (Dsub(max)/Dsub(min). The relationships are derived in terms of a constant D 0 (the dose on the surface of the products in the pass close to the source) and the relaxation length (μt) of the radiation in the product. Since the uniformity ratio and other dose parameters can be calculated for certain chosen values of μt, the individual values Dsub(min) to Dsub(max) into 10 equal fractions, the amount of product irradiated to each of the fractions is calculated and it is shown that, independent of the value of U.R., about a third of the product receives a dose in the first fraction above Dsub(min). It is also shown that for a given median dose, the average dose decreases as U.R. increases. The calculated dose relationships are confirmed by measurement in homogeneous dummy product, using the lyoluminescence of glutamine to measure dose. The implications of these results for the regulation of the food irradiation process and for the design of irradiation facilities are discussed. (author)

  7. Support to the development of food processing enterprise in Africa ...

    Journal of Food Technology in Africa. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 4, No 2 (1999) >. Log in or Register to get access to full text downloads.

  8. Cognitive Food Processing in Binge-Eating Disorder: An Eye-Tracking Study.

    Sperling, Ingmar; Baldofski, Sabrina; Lüthold, Patrick; Hilbert, Anja

    2017-08-19

    Studies indicate an attentional bias towards food in binge-eating disorder (BED); however, more evidence on attentional engagement and disengagement and processing of multiple attention-competing stimuli is needed. This study aimed to examine visual attention to food and non-food stimuli in BED. In n = 23 participants with full-syndrome and subsyndromal BED and n = 23 individually matched healthy controls, eye-tracking was used to assess attention to food and non-food stimuli during a free exploration paradigm and a visual search task. In the free exploration paradigm, groups did not differ in their initial fixation position. While both groups fixated non-food stimuli significantly longer than food stimuli, the BED group allocated significantly more attention towards food than controls. In the visual search task, groups did not differ in detection times. However, a significant detection bias for food was found in full-syndrome BED, but not in controls. An increased initial attention towards food was related to greater BED symptomatology and lower body mass index (BMI) only in full-syndrome BED, while a greater maintained attention to food was associated with lower BMI in controls. The results suggest food-biased visual attentional processing in adults with BED. Further studies should clarify the implications of attentional processes for the etiology and maintenance of BED.

  9. The National Advisory Committee on Hyperkinesis and Food Additives. Final Report to the Nutrition Foundation.

    Nutrition Foundation, Inc., Washington, DC.

    In response to the issues raised by B. Feingold regarding the possible role of food additives as a cause of hyperactivity and learing disability, the Nutrition Foundation organized a critical review of Feinfold's claims by a group of behavioral and medical scientists. Among the cliams made by Feingold was that, when treated with the salicylate and…

  10. 2013 Advanced Environmental Health/Advanced Food Technology Standing Review Panel Final Report

    Steinberg, Susan

    2014-01-01

    The 2013 Advanced Environmental Health/Advanced Food Technology (AEH/AFT) Standing Review Panel (from here on referred to as the SRP) participated in a WebEx/teleconference with members of the Space Human Factors and Habitability (SHFH) Element, representatives from the Human Research Program (HRP), and NASA Headquarters on November 22, 2013 (list of participants is in Section IX of this report). The SRP reviewed the updated research plans for the Risk of Adverse Health Effects Due to Alterations in Host-Microorganism Interactions (Host Microbe Risk) and the Risk of Performance Decrement and Crew Illness Due to an Inadequate Food System (Food Risk). The SRP also received a status update on the Risk of Adverse Health Effects of Exposure to Dust and Volatiles during Exploration of Celestial Bodies (Dust Risk). Overall, the SRP was impressed with the strong research plans presented by the scientists and staff associated with the SHFH Element. The SRP also thought that the updated research plans were thorough, well organized, and presented in a comprehensive manner. The SRP agrees with the changes made to the Host Microbe Risk and Food Risk portfolios and thinks that the targets for Gap closure are appropriate.

  11. Sectoral Innovation Performance in the Food and Drinks Sector. Final Report. Task 1

    Leis, M.

    2010-01-01

    Food and drinks manufacturing is a very complex sector with a lot of possibilities for improvement and innovation, but also with a variety of challenges in regard to financial and human resources, fragmented consumer interests and concerns, regulations, costs and a balancing act between novelty and

  12. Processed and ultra-processed food consumption among children aged 13 to 35 months and associated factors.

    Batalha, Mônica Araujo; França, Ana Karina Teixeira da Cunha; Conceição, Sueli Ismael Oliveira da; Santos, Alcione Miranda Dos; Silva, Francelena de Sousa; Padilha, Luana Lopes; Silva, Antônio Augusto Moura da

    2017-11-21

    The aim of this study was to evaluate the consumption of processed and ultra-processed foods among children aged 13-35 months and its associated factors. We studied 1,185 children within the BRISA cohort in São Luís, Maranhão State, Brazil. The food consumption was investigated using a 24-hour recall, and the percentages of daily caloric intake and nutrients were estimated by food groups according to "NOVA" classification. We chose to categorize children belonging to the upper tertile of the distribution as having a high consumption of processed and ultra-processed food products. The Poisson regression model with robust variance estimation using a hierarchical modeling approach was used to calculate the prevalence ratios (PRs) of variables associated with high consumption of processed and ultra-processed food products. The mean energy intake was 1,226Kcal/day. After adjustments, there was a higher proportion of high consumption of processed and ultra-processed food products among children whose mothers had food products and preventing adverse health outcomes in later life.

  13. Organic food processing: a framework for concept, starting definitions and evaluation.

    Kahl, Johannes; Alborzi, Farnaz; Beck, Alexander; Bügel, Susanne; Busscher, Nicolaas; Geier, Uwe; Matt, Darja; Meischner, Tabea; Paoletti, Flavio; Pehme, Sirli; Ploeger, Angelika; Rembiałkowska, Ewa; Schmid, Otto; Strassner, Carola; Taupier-Letage, Bruno; Załęcka, Aneta

    2014-10-01

    In 2007 EU Regulation (EC) 834/2007 introduced principles and criteria for organic food processing. These regulations have been analysed and discussed in several scientific publications and research project reports. Recently, organic food quality was described by principles, aspects and criteria. These principles from organic agriculture were verified and adapted for organic food processing. Different levels for evaluation were suggested. In another document, underlying paradigms and consumer perception of organic food were reviewed against functional food, resulting in identifying integral product identity as the underlying paradigm and a holistic quality view connected to naturalness as consumers' perception of organic food quality. In a European study, the quality concept was applied to the organic food chain, resulting in a problem, namely that clear principles and related criteria were missing to evaluate processing methods. Therefore the goal of this paper is to describe and discuss the topic of organic food processing to make it operational. A conceptual background for organic food processing is given by verifying the underlying paradigms and principles of organic farming and organic food as well as on organic processing. The proposed definition connects organic processing to related systems such as minimal, sustainable and careful, gentle processing, and describes clear principles and related criteria. Based on food examples, such as milk with different heat treatments, the concept and definitions were verified. Organic processing can be defined by clear paradigms and principles and evaluated according criteria from a multidimensional approach. Further work has to be done on developing indicators and parameters for assessment of organic food quality. © 2013 Society of Chemical Industry.

  14. Which Foods May Be Addictive? The Roles of Processing, Fat Content, and Glycemic Load

    Schulte, Erica M.; Avena, Nicole M.; Gearhardt, Ashley N.

    2015-01-01

    Objectives We propose that highly processed foods share pharmacokinetic properties (e.g. concentrated dose, rapid rate of absorption) with drugs of abuse, due to the addition of fat and/or refined carbohydrates and the rapid rate the refined carbohydrates are absorbed into the system, indicated by glycemic load (GL). The current study provides preliminary evidence for the foods and food attributes implicated in addictive-like eating. Design Cross-sectional. Setting University (Study One) and community (Study Two). Participants 120 undergraduates participated in Study One and 384 participants recruited through Amazon MTurk participated in Study Two. Measurements In Study One, participants (n = 120) completed the Yale Food Addiction Scale (YFAS) followed by a forced-choice task to indicate which foods, out of 35 foods varying in nutritional composition, were most associated with addictive-like eating behaviors. Using the same 35 foods, Study Two utilized hierarchical linear modeling to investigate which food attributes (e.g., fat grams) were related to addictive-like eating behavior (at level one) and explored the influence of individual differences for this association (at level two). Results In Study One, processed foods, higher in fat and GL, were most frequently associated with addictive-like eating behaviors. In Study Two, processing was a large, positive predictor for whether a food was associated with problematic, addictive-like eating behaviors. BMI and YFAS symptom count were small-to-moderate, positive predictors for this association. In a separate model, fat and GL were large, positive predictors of problematic food ratings. YFAS symptom count was a small, positive predictor of the relationship between GL and food ratings. Conclusion The current study provides preliminary evidence that not all foods are equally implicated in addictive-like eating behavior, and highly processed foods, which may share characteristics with drugs of abuse (e.g. high dose

  15. Which foods may be addictive? The roles of processing, fat content, and glycemic load.

    Erica M Schulte

    Full Text Available We propose that highly processed foods share pharmacokinetic properties (e.g. concentrated dose, rapid rate of absorption with drugs of abuse, due to the addition of fat and/or refined carbohydrates and the rapid rate the refined carbohydrates are absorbed into the system, indicated by glycemic load (GL. The current study provides preliminary evidence for the foods and food attributes implicated in addictive-like eating.Cross-sectional.University (Study One and community (Study Two.120 undergraduates participated in Study One and 384 participants recruited through Amazon MTurk participated in Study Two.In Study One, participants (n = 120 completed the Yale Food Addiction Scale (YFAS followed by a forced-choice task to indicate which foods, out of 35 foods varying in nutritional composition, were most associated with addictive-like eating behaviors. Using the same 35 foods, Study Two utilized hierarchical linear modeling to investigate which food attributes (e.g., fat grams were related to addictive-like eating behavior (at level one and explored the influence of individual differences for this association (at level two.In Study One, processed foods, higher in fat and GL, were most frequently associated with addictive-like eating behaviors. In Study Two, processing was a large, positive predictor for whether a food was associated with problematic, addictive-like eating behaviors. BMI and YFAS symptom count were small-to-moderate, positive predictors for this association. In a separate model, fat and GL were large, positive predictors of problematic food ratings. YFAS symptom count was a small, positive predictor of the relationship between GL and food ratings.The current study provides preliminary evidence that not all foods are equally implicated in addictive-like eating behavior, and highly processed foods, which may share characteristics with drugs of abuse (e.g. high dose, rapid rate of absorption appear to be particularly associated with

  16. Chemical stability of astaxanthin integrated into a food matrix: Effects of food processing and methods for preservation.

    Martínez-Delgado, Alejandra Anahí; Khandual, Sanghamitra; Villanueva-Rodríguez, Socorro Josefina

    2017-06-15

    Astaxanthin is a carotenoid pigment found in numerous organisms ranging from bacteria to algae, yeasts, plants, crustaceans and fish such as salmon. Technological importance of this pigment emerged from various studies demonstrating that it is a powerful antioxidant, even with higher activity than alpha-tocopherol and other carotenoids. It has been included in various pharmaceutical products because of several beneficial properties. By its nature, astaxanthin is susceptible to degradation and can undergo chemical changes during food processing. Therefore, different studies have focused on improving the stability of the carotenoid under conditions such as high temperatures, pressures and mechanical force, among others. In this review, common processes involved in food processing and their effect on the stability of astaxanthin, integrated into a food matrix are discussed. Moreover, preservation techniques such as microencapsulation, inclusion in emulsions, suspensions, liposomes, etc., that are being employed to maintain stability of the product are also reviewed. Copyright © 2016 Elsevier Ltd. All rights reserved.

  17. The application analysis of high energy electron accelerator in food irradiation processing

    Deng Wenmin; Chen Hao; Feng Lei; Zhang Yaqun; Chen Xun; Li Wenjun; Xiang Chengfen; Pei Ying; Wang Zhidong

    2012-01-01

    Irradiation technology of high energy electron accelerator has been highly concerned in food processing industry with its fast development, especially in the field of food irradiation processing. In this paper, equipment and research situation of high energy electron accelerator were collected, meanwhile, the similarities and differences between high energy electron beam and 60 Co γ-rays were discussed. In order to provide more references of high energy electron beam irradiation, the usages of high energy electron in food irradiation processing was prospected. These information would promote the development of domestic food irradiation industry and give a useful message to irradiation enterprises and researchers. (authors)

  18. Advertising of ultra-processed foods and beverages: children as a vulnerable population

    Mallarino,Christina; Gómez,Luis F; González-Zapata,Laura; Cadena,Yazmín; Parra,Diana C

    2013-01-01

    The rapid nutrition transition occurring in Latin America has resulted in a sharp increase of childhood overweight and obesity. Recent evidence has shown that food and beverage advertising has a great influence on children’s eating behavior. This population has become a key target market for the ultra-processed foods and beverages industry, which is marketing products in an aggressive way. Evidence shows that Latin American countries have poor regulation of ultra-processed foods and bev...

  19. Innovative generation of delivery systems containing bioactive compounds to finally be incorporated into food products.

    Giammarino, Domenico

    2017-01-01

    The oxidation of polyunsaturated fatty acids present in food could produce 4-hydroxy-2-nonenal and 4-hydroxy-2-hexenal which are reactive hidroxyalkenals that affect the quality and the safety of products. These compounds, absorbed through the diet, have toxic pathways inducing several diseases such as Alzheimer's disease, cataract, diabetes, cancer and atherosclerosis. In the present study three fresh cheeses with modified fat were obtained by adding emulsions containing soybean oil and diff...

  20. Mixed deep learning and natural language processing method for fake-food image recognition and standardization to help automated dietary assessment.

    Mezgec, Simon; Eftimov, Tome; Bucher, Tamara; Koroušić Seljak, Barbara

    2018-04-06

    The present study tested the combination of an established and a validated food-choice research method (the 'fake food buffet') with a new food-matching technology to automate the data collection and analysis. The methodology combines fake-food image recognition using deep learning and food matching and standardization based on natural language processing. The former is specific because it uses a single deep learning network to perform both the segmentation and the classification at the pixel level of the image. To assess its performance, measures based on the standard pixel accuracy and Intersection over Union were applied. Food matching firstly describes each of the recognized food items in the image and then matches the food items with their compositional data, considering both their food names and their descriptors. The final accuracy of the deep learning model trained on fake-food images acquired by 124 study participants and providing fifty-five food classes was 92·18 %, while the food matching was performed with a classification accuracy of 93 %. The present findings are a step towards automating dietary assessment and food-choice research. The methodology outperforms other approaches in pixel accuracy, and since it is the first automatic solution for recognizing the images of fake foods, the results could be used as a baseline for possible future studies. As the approach enables a semi-automatic description of recognized food items (e.g. with respect to FoodEx2), these can be linked to any food composition database that applies the same classification and description system.