Genotoxicity of clays with potential use in biopolymers for food packaging

DEFF Research Database (Denmark)

Sharma, Anoop Kumar; Mortensen, Alicja; Hadrup, Niels

Genotoxicity of clays with potential use in biopolymers for food packaging Plastics produced from biopolymers are of commercial interest as they are manufactured from renewable resources such as agricultural crop wastes and have the potential to meet environmental and health requirements. Biopoly......Genotoxicity of clays with potential use in biopolymers for food packaging Plastics produced from biopolymers are of commercial interest as they are manufactured from renewable resources such as agricultural crop wastes and have the potential to meet environmental and health requirements...... in crude suspensions (suspended in cell culture medium) and crude suspensions filtrated through a 0.2 µm pore size filter in order to investigate the potential effect of “nanoparticles” only. The two clays showed noticeable differences in genotoxicity; both crude and filtered suspensions of Cloisite...

Development of more friendly food packaging materials base on polypropylene through blending with polylacticacid

Science.gov (United States)

Setiawan, Achmad Hanafi; Aulia, Fauzan

2017-01-01

The commonly food packaging materials today is used a thin layer plastic or film, which is made of a synthetic polymer, such as polypropylene (PP). However, the use of these polymers has a negative impact on the environment, because the synthetic polymer is difficult to degrade naturally by the biotic components such as micro-organisms decomposers and abiotic components such as the sunshine. The use of the biodegradable polymeric material will reduce the use of synthetic polymer products, thereby reducing plastic waste pollution at relatively low cost, it is expected to produce positive effects both for the environment and in terms of economy. PLA is a biodegradable polymer that can be substituted totally or partially to synthetic polymers as far as could fulfill the main function of packaging in the protection and preservation of food. Increasing PLA content in polypropylene blend will affect to the increasing in its water absorption and also its biodegradable. 20% PLA may the optimum composition of poly-blend for food packaging.

New technical design of food packaging makes the opening process easier for patients with hand disorders.

Science.gov (United States)

Hensler, Stefanie; Herren, Daniel B; Marks, Miriam

2015-09-01

Opening packaged food is a complex daily activity carried out worldwide. Peelable packaging, as used for cheese or meat, causes real problems for many consumers, especially elderly people and those with hand disorders. Our aim was to investigate the possibility of producing meat packaging that is easier for patients with hand disorders to open. One hundred patients with hand osteoarthritis were asked to open a meat package currently available in supermarkets (Type A) and a modified, newly designed version (Type B), and rate their experiences with a consumer satisfaction index (CSI). The mean CSI of the Type B packs was 68.9%, compared with 41.9% for Type A (p food packages that afford greater consumer satisfaction. Such future packaging would benefit not only people with hand disorders but also the population as a whole. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Insect-resistant food packaging film development using cinnamon oil and microencapsulation technologies.

Science.gov (United States)

Kim, In-Hah; Han, Jaejoon; Na, Ja Hyun; Chang, Pahn-Sik; Chung, Myung Sub; Park, Ki Hwan; Min, Sea C

2013-02-01

Insect-resistant films containing a microencapsulated insect-repelling agent were developed to protect food products from the Indian meal moth (Plodia interpunctella). Cinnamon oil (CO), an insect repelling agent, was encapsulated with gum arabic, whey protein isolate (WPI)/maltodextrin (MD), or poly(vinyl alcohol) (PVA). A low-density polyethylene (LDPE) film was coated with an ink or a polypropylene (PP) solution that incorporated the microcapsules. The encapsulation efficiency values obtained with gum arabic, WPI/MD, and PVA were 90.4%, 94.6%, and 80.7%, respectively. The films containing a microcapsule emulsion of PVA and CO or incorporating a microcapsule powder of WPI/MD and CO were the most effective (P packaging for food products. The insect-repelling effect of cinnamon oil incorporated into LDPE films was more effective with microencapsulation. The system developed in this research with LDPE film may also be extended to other food-packaging films where the same coating platform can be used. This platform is interchangeable and easy to use for the delivery of insect-repelling agents. The films can protect a wide variety of food products from invasion by the Indian meal moth. © 2013 Institute of Food Technologists®

An Evaluation of the Healthiness of the Indian Packaged Food and Beverage Supply.

Science.gov (United States)

Jones, Alexandra; Dunford, Elizabeth; Crossley, Rachel; Thout, Sudhir Raj; Rayner, Mike; Neal, Bruce

2017-10-09

Availability of less-healthy packaged food and beverage products has been implicated as an important driver of obesity and diet-related disease. An increasing number of packaged foods and beverages are sold in India. Our objective was to evaluate the healthiness of packaged foods sold by India's largest manufacturers. Healthiness was assessed using the Australian Health Star Rating (HSR) system and the World Health Organization's European Regional Office (WHO Euro) Nutrient Profile Model. Sales-value-weighted mean healthiness and the proportions of "healthy" products (using a validated HSR cut-off of ≥3.5, and products meeting WHO Euro criteria as healthy enough to market to children) were calculated overall, by company and by food category. Nutrient information for 943 products sold by the 11 largest Indian manufacturers was obtained from nutrient labels, company websites or directly from the manufacturer. Healthiness was low overall (mean HSR 1.8 out of 5.0 stars) with a low proportion defined as "healthy" by both HSR (17%) and also by WHO Euro criteria (8%). There were marked differences in the healthiness of similar products within food categories. Substantial variation between companies (minimum sales-value-weighted mean HSR 0.5 for Company G, versus maximum HSR 3.0 for Company F) was a result of differences in the types of products sold and the nutritional composition of individual products. There are clear opportunities for India's largest food companies to improve both the nutritional quality of individual products and to improve their product mix to include a greater proportion of healthy products.

Evaluation of performance of food packagings when treated with ionizing radiation

International Nuclear Information System (INIS)

Moura, Esperidiana Augusta Barretos de

2006-01-01

In this study the mechanical properties (tensile strength and percentage elongation at break and penetration resistance), optical properties, gas oxygen and water vapor permeability, the overall migration tests into aqueous food simulant (3% aqueous acetic acid) and fatty food simulant (n-heptane), as well as the formation of volatile radiation product tests were used to evaluate the effects of ionizing radiation (gamma irradiation or electron-beam irradiation) on commercial monolayer and multilayer flexible plastics packaging materials. These films are two typical materials produced in Brazil for industrial meat packaging, one of them is a monolayer low-density polyethylene (LDPE) and other is a multilayer co extruded low-density polyethylene (LDPE), ethylene vinyl alcohol (EVOH), polyamide (PA) based film (LDPE/EVOH/PA). Film samples were irradiated with doses up to 30 kGy, at room temperature and in the presence of air with gamma rays using a 60 Co facility and electron beam from 1.5 MeV electrostatic accelerator. Alterations of these properties were detected according to the dose applied initially eight day after irradiation took place and new alterations of these values when the properties were evaluate two to three months after irradiation process. The results showed that scission reactions are higher than cross-linking process for both studied films, irradiated with gamma rays and electron beam. The evaluated properties of the irradiated films were not affected significantly with the dose range and period studied. The monolayer Unipac PE-60 and the multilayer Lovaflex CH 130 films can be used as food packaging materials for food pasteurization and in the sterilization process of by ionizing radiation using a gamma facilities and electron beam accelerators in commercial scale. (author)

Fluorinated alkyl substances and technical mixtures used in food paper-packaging exhibit endocrine-related activity in vitro

DEFF Research Database (Denmark)

Rosenmai, Anna Kjerstine; Taxvig, Camilla; Svingen, Terje

2016-01-01

Migration of chemicals from packaging materials to foods may lead to human exposure. Polyfluoroalkyl substances (PFAS) can be used in technical mixtures (TMs) for use in food packaging of paper and board, and PFAS have been detected in human serum and umbilical cord blood. The specific structures...... of the PFAS in TMs are often unknown, but polyfluorinated alkyl phosphate esters (PAPs) have been characterized in TMs, food packaging, and in food. PAPs can be metabolized into fluorotelomer alcohols (FTOHs) and perfluoroalkyl carboxylic acids (PFCAs). Some PFAS have endocrine activities, highlighting...... the need to investigate these effects. Herein, we studied the endocrine activity of less characterized PFAS, including short-chain PFCAs and FTOHs, PAPs, and TMs of unknown chemical composition. Long-chain PFCAs were also included. We applied seven assays covering effects on estrogen, glucocorticoid...

Novel silver-based nanoclay as an antimicrobial in polylactic acid food packaging coatings.

Science.gov (United States)

Busolo, Maria A; Fernandez, Patricia; Ocio, Maria J; Lagaron, Jose M

2010-11-01

This paper presents a comprehensive performance study of polylactic acid (PLA) biocomposites, obtained by solvent casting, containing a novel silver-based antimicrobial layered silicate additive for use in active food packaging applications. The silver-based nanoclay showed strong antimicrobial activity against Gram-negative Salmonella spp. Despite the fact that no exfoliation of the silver-based nanoclay in PLA was observed, as suggested by transmission electron microscopy (TEM) and wide angle X-ray scattering (WAXS) experiments, the additive dispersed nicely throughout the PLA matrix to a nanoscale, yielding nanobiocomposites. The films were highly transparent with enhanced water barrier and strong biocidal properties. Silver migration from the films to a slightly acidified water medium, considered an aggressive food simulant, was measured by stripping voltammetry. Silver migration accelerated after 6 days of exposure. Nevertheless, the study suggests that migration levels of silver, within the specific migration levels referenced by the European Food Safety Agency (EFSA), exhibit antimicrobial activity, supporting the potential application of this biocidal additive in active food-packaging applications to improve food quality and safety.

Ultra-processed foods have the worst nutrient profile, yet they are the most available packaged products in a sample of New Zealand supermarkets.

Science.gov (United States)

Luiten, Claire M; Steenhuis, Ingrid Hm; Eyles, Helen; Ni Mhurchu, Cliona; Waterlander, Wilma E

2016-02-01

To examine the availability of packaged food products in New Zealand supermarkets by level of industrial processing, nutrient profiling score (NPSC), price (energy, unit and serving costs) and brand variety. Secondary analysis of cross-sectional survey data on packaged supermarket food and non-alcoholic beverages. Products were classified according to level of industrial processing (minimally, culinary and ultra-processed) and their NPSC. Packaged foods available in four major supermarkets in Auckland, New Zealand. Packaged supermarket food products for the years 2011 and 2013. The majority (84% in 2011 and 83% in 2013) of packaged foods were classified as ultra-processed. A significant positive association was found between the level of industrial processing and NPSC, i.e., ultra-processed foods had a worse nutrient profile (NPSC=11.63) than culinary processed foods (NPSC=7.95), which in turn had a worse nutrient profile than minimally processed foods (NPSC=3.27), Pprice measures and level of processing. The study observed many variations of virtually the same product. The ten largest food manufacturers produced 35% of all packaged foods available. In New Zealand supermarkets, ultra-processed foods comprise the largest proportion of packaged foods and are less healthy than less processed foods. The lack of significant price difference between ultra- and less processed foods suggests ultra-processed foods might provide time-poor consumers with more value for money. These findings highlight the need to improve the supermarket food supply by reducing numbers of ultra-processed foods and by reformulating products to improve their nutritional profile.

Gelatin-Based Films and Coatings for Food Packaging Applications

Directory of Open Access Journals (Sweden)

Marina Ramos

2016-09-01

Full Text Available This review discusses the latest advances in the composition of gelatin-based edible films and coatings, including nanoparticle addition, and their properties are reviewed along their potential for application in the food packaging industry. Gelatin is an important biopolymer derived from collagen and is extensively used by various industries because of its technological and functional properties. Nowadays, a very wide range of components are available to be included as additives to improve its properties, as well as its applications and future potential. Antimicrobials, antioxidants and other agents are detailed due to the fact that an increasing awareness among consumers regarding healthy lifestyle has promoted research into novel techniques and additives to prolong the shelf life of food products. Thanks to its ability to improve global food quality, gelatin has been particularly considered in food preservation of meat and fish products, among others.

Photonics and nanophotonics and information and communication technologies in modern food packaging.

Science.gov (United States)

Sarapulova, Olha; Sherstiuk, Valentyn; Shvalagin, Vitaliy; Kukhta, Aleksander

2015-01-01

The analysis of the problem of conjunction of information and communication technologies (ICT) with packaging industry and food production was made. The perspective of combining the latest advances of nanotechnology, including nanophotonics, and ICT for creating modern smart packaging was shown. There were investigated luminescent films with zinc oxide nanoparticles, which change luminescence intensity as nano-ZnO interacts with decay compounds of food products, for active and intelligent packaging. High luminescent transparent films were obtained from colloidal suspension of ZnO and polyvinylpyrrolidone (PVP). The influence of molecular mass, concentration of nano-ZnO, and film thickness on luminescent properties of films was studied in order to optimize the content of the compositions. The possibility of covering the obtained films with polyvinyl alcohol was considered for eliminating water soluble properties of PVP. The luminescent properties of films with different covers were studied. The insoluble in water composition based on ZnO stabilized with colloidal silicon dioxide and PVP in polymethylmethacrylate was developed, and the luminescent properties of films were investigated. The compositions are non-toxic, safe, and suitable for applying to the inner surface of active and intelligent packaging by printing techniques, such as screen printing, flexography, inkjet, and pad printing.

Photonics and Nanophotonics and Information and Communication Technologies in Modern Food Packaging

Science.gov (United States)

Sarapulova, Olha; Sherstiuk, Valentyn; Shvalagin, Vitaliy; Kukhta, Aleksander

2015-05-01

The analysis of the problem of conjunction of information and communication technologies (ICT) with packaging industry and food production was made. The perspective of combining the latest advances of nanotechnology, including nanophotonics, and ICT for creating modern smart packaging was shown. There were investigated luminescent films with zinc oxide nanoparticles, which change luminescence intensity as nano-ZnO interacts with decay compounds of food products, for active and intelligent packaging. High luminescent transparent films were obtained from colloidal suspension of ZnO and polyvinylpyrrolidone (PVP). The influence of molecular mass, concentration of nano-ZnO, and film thickness on luminescent properties of films was studied in order to optimize the content of the compositions. The possibility of covering the obtained films with polyvinyl alcohol was considered for eliminating water soluble properties of PVP. The luminescent properties of films with different covers were studied. The insoluble in water composition based on ZnO stabilized with colloidal silicon dioxide and PVP in polymethylmethacrylate was developed, and the luminescent properties of films were investigated. The compositions are non-toxic, safe, and suitable for applying to the inner surface of active and intelligent packaging by printing techniques, such as screen printing, flexography, inkjet, and pad printing.

Front-of-package references to fiber on foods in Canadian supermarkets highlight the need for increased nutrition knowledge among consumers.

Science.gov (United States)

Sacco, Jocelyn E; Sumanac, Dunja; Tarasuk, Valerie

2013-01-01

To assess the nature of the guidance on fiber, a nutrient for which many Canadians' intakes are suboptimal, provided by manufacturers' use of front-of-package references on food in Canadian supermarkets. Survey of all prepackaged food sold in 3 large supermarkets in Toronto. Front-of-package references to fiber and other forms of nutrition-related marketing were recorded from all products. For a subsample of breads, Nutrition Facts table information was also collected. Descriptive statistics; t test. Front-of-package references to fiber were found on 6% of all foods, but large proportions of high fiber foods bore no front-of-package references to fiber. Many foods making a reference to fiber (17%) are "foods to limit," according to Canada's Food Guide. Front-of-package references to fiber were declared in at least 30 different ways, and 31% used unregulated language. Among breads, use of regulated language was associated with higher fiber content. Consumers may be faced with challenges in seeking out healthful sources of fiber in the grocery store, given the complexity of existing front-of-package nutrition-related marketing and limited references to fiber in some categories. This work suggests that current nutrition-related marketing cannot function as a substitute for nutrition education. Copyright © 2013 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Migration kinetics of four photo-initiators from paper food packaging to solid food simulants.

Science.gov (United States)

Cai, Huimei; Ji, Shuilin; Zhang, Juzhou; Tao, Gushuai; Peng, Chuanyi; Hou, Ruyan; Zhang, Liang; Sun, Yue; Wan, Xiaochun

2017-09-01

The migration behaviour of four photo-initiators (BP, EHA, MBP and Irgacure 907) was studied by 'printing' onto four different food-packaging materials (Kraft paper, white cardboard, Polyethylene (PE)-coated paper and composite paper) and tracking movement into the food simulant: Tenax-TA (porous polymer 2,6-diphenyl furan resin). The results indicated that the migration of the photo-initiators was related to the molecular weight and log K o/w of each photo-initiator. At different temperatures, the migration rates of the photo-initiators were different in papers with different thicknesses. The amount of each photo-initiator found in the food was closely related to the food matrix. The Weibull model was used to predict the migration load into the food simulants by calculating the parameters τ and β and determining the relationship of the two parameters with temperature and paper thickness. The established Weibull model was then used to predict the migration of each photo-initiator with respect to different foods. A two-parameter Weibull model fitted the actual situation, with some deviation from the actual migration amount.

Active Packaging Coatings

Directory of Open Access Journals (Sweden)

Luis J. Bastarrachea

2015-11-01

Full Text Available Active food packaging involves the packaging of foods with materials that provide an enhanced functionality, such as antimicrobial, antioxidant or biocatalytic functions. This can be achieved through the incorporation of active compounds into the matrix of the commonly used packaging materials, or by the application of coatings with the corresponding functionality through surface modification. The latter option offers the advantage of preserving the packaging materials’ bulk properties nearly intact. Herein, different coating technologies like embedding for controlled release, immobilization, layer-by-layer deposition, and photografting are explained and their potential application for active food packaging is explored and discussed.

The major types of added sugars and non-nutritive sweeteners in a sample of Australian packaged foods.

Science.gov (United States)

Probst, Yasmine C; Dengate, Alexis; Jacobs, Jenny; Louie, Jimmy Cy; Dunford, Elizabeth K

2017-12-01

Limiting the intake of added sugars in the diet remains a key focus of global dietary recommendations. To date there has been no systematic monitoring of the major types of added sugars used in the Australian food supply. The present study aimed to identify the most common added sugars and non-nutritive sweeteners in the Australian packaged food supply. Secondary analysis of data from the Australian FoodSwitch database was undertaken. Forty-six added sugars and eight non-nutritive sweetener types were extracted from the ingredient lists of 5744 foods across seventeen food categories. Australia. Not applicable. Added sugar ingredients were found in 61 % of the sample of foods examined and non-nutritive sweetener ingredients were found in 69 %. Only 31 % of foods contained no added sugar or non-nutritive sweetener. Sugar (as an ingredient), glucose syrup, maple syrup, maltodextrin and glucose/dextrose were the most common sugar ingredient types identified. Most Australian packaged food products had at least one added sugar ingredient, the most common being 'sugar'. The study provides insight into the most common types of added sugars and non-nutritive sweeteners used in the Australian food supply and is a useful baseline to monitor changes in how added sugars are used in Australian packaged foods over time.

Sterilized PP/HMSPP cushion foams for medical and food packaging applications

International Nuclear Information System (INIS)

Cardoso, Elisabeth C.L.; Lima, L. Filipe C.P.; Parra, Duclerc F.; Lugao, Ademar B.; Bueno, N.R.; Gasparin, Eleosmar

2009-01-01

Treatment with gamma radiation is becoming a common process for the sterilization of packages, mostly made of natural or synthetic plastics, used in aseptic processing of foods and pharmaceuticals. Packaging materials may be irradiated either prior or after filling; the irradiation prior to filling is usually chosen for dairy products, processed food, beverages, pharmaceuticals and medical devices. Cushion foams are used to help protect fragile items during moving transport. Shock, vibration and damage are avoided by the cushioning effect and chances of product damage are reduced. It is easy to use and perforated for easy tearing. Cushion foams are employed to wrap glasses, plates, crockery, lamps, electronics and other breakable items. This paper presents special cushion foams to be used for medical and food packaging applications; so, these foams will be gamma irradiated before getting in contact with these special articles. Foams were previously produced from a 50% blending Polypropylene homopolymer / High Melt Strength Polypropylene (HMSPP) thereof, that presented following results for properties assessed: melt flow index, 230 deg C - 3.67 g/10 minutes; crystallinity = 47%; melt strength, at 200 deg C = 7.3 cN. This admixture was further fed into the barrel of a single-screw extruder, Rheomex 332 p, equipped with 3:1,33 d screw and 19/33 special screw for foaming, with standard controller and monitored panel, temperature controller (2 channels), melt temperature (2 channels) and melt pressure (4 channels). By using a 175/200/210/220/165/25 (deg C) profile temperature, and after attaining a homogeneous melting, a given amount of physical blowing agent (nitrogen) was injected and mixed with the polymer melt stream to produce the foam. Foamed extrudate was subjected to sterilization radiation doses: 25, 50, 75 and 100 kGy and further evaluated as per: appearance (whiteness / yellowness) and temperature dependent oxidative-induction time (TOIT) tests, by comparing

Bioactive packaging using antioxidant extracts for the prevention of microbial food-spoilage.

Science.gov (United States)

Moreira, Diana; Gullón, Beatriz; Gullón, Patricia; Gomes, Ana; Tavaria, Freni

2016-07-13

Bioactive food packaging is an innovative approach for the prevention of the growth of food-spoilage microorganisms. Four active extracts from agroindustrial subproducts (Eucalyptus wood, almond shells, corn cobs and grape pomace) with demonstrated antioxidant activity have been investigated for bestowing antimicrobial activity to bioactive packaging. To carry out this evaluation, the antioxidant extracts were tested against five food pathogenic bacteria, namely, Escherichia coli, Pseudomonas aeruginosa, Listeria monocytogenes, Staphylococcus aureus and Salmonella spp. The results obtained showed that all the tested extracts inhibited the growth of all five pathogenic bacteria. From the analysis of the minimal bactericidal concentrations (MBCs), the Eucalyptus wood extract was the most active, being necessary only 2% (v/v) to inhibit Pseudomonas aeruginosa, Listeria monocytogenes, and Staphylococcus aureus, whereas almond shells extract were less active requiring 4% (w/v) to inhibit the growth of Escherichia coli and Pseudomonas aeruginosa and the extract from corn cobs was bactericidal against Escherichia coli and Staphylococcus aureus at a concentration of 4% (w/v). After checking their antimicrobial activity, the antioxidant extracts have been incorporated into sodium alginate films and the maintenance of their antimicrobial properties was confirmed. This work showed that the antioxidant extracts from agroindustrial byproducts exhibited antimicrobial activity and were suitable for incorporation into edible films that could be used in bioactive packaging systems.

77 FR 75187 - Certain Food Containers, Cups, Plates, Cutlery, and Related Items and Packaging Thereof...

Science.gov (United States)

2012-12-19

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-835] Certain Food Containers, Cups, Plates, Cutlery, and Related Items and Packaging Thereof; Commission Determination Not To Review an... containers, cups, plates, cutlery, and related items and packaging thereof by reason of infringement of U.S...

Nanomaterials-Based Water and Moisture Impermeable Barrier for Food Packaging, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The goal of this project is to develop flexible food packaging materials with an effective barrier against oxygen and moisture. This technology will build on sol-gel...

Characterization and antimicrobial properties of food packaging methylcellulose films containing stem extract of Ginja cherry.

Science.gov (United States)

Campos, Débora; Piccirillo, Clara; Pullar, Robert C; Castro, Paula Ml; Pintado, Maria M E

2014-08-01

Food contamination and spoilage is a problem causing growing concern. To avoid it, the use of food packaging with appropriate characteristics is essential; ideally, the packaging should protect food from external contamination and exhibit antibacterial properties. With this aim, methylcellulose (MC) films containing natural extracts from the stems of Ginja cherry, an agricultural by-product, were developed and characterized. The antibacterial activity of films was screened by the disc diffusion method and quantified using the viable cell count assay. The films inhibited the growth of both Gram-positive and Gram-negative strains (Listeria innocua, methicillin-sensitive Staphylococcus aureus, methicillin-resistant S. aureus, Salmonella Enteritidis, Escherichia coli). For the films with lower extract content, effectiveness against the microorganisms depended on the inoculum concentration. Scanning electron microscope images of the films showed that those containing the extracts had a smooth and continuous structure. UV-visible spectroscopy showed that these materials do not transmit light in the UV. This study shows that MC films containing agricultural by-products, in this case Ginja cherry stem extract, could be used to prevent food contamination by relevant bacterial strains and degradation by UV light. Using such materials in food packaging, the shelf life of food products could be extended while utilizing an otherwise wasted by-product. © 2013 Society of Chemical Industry.

Food packaging cues influence taste perception and increase effort provision for a recommended snack product in children

Directory of Open Access Journals (Sweden)

Laura eEnax

2015-07-01

Full Text Available Food marketing research shows that child-directed marketing cues have pronounced effects on food preferences and consumption, but are most often placed on products with low nutritional quality. Effects of child-directed marketing strategies for healthy food products remain to be studied in more detail. Previous research suggests that effort provision explains additional variance in food choice. This study investigated the effects of packaging cues on explicit preferences and effort provision for healthy food items in elementary school children. Each of 179 children rated three, objectively identical, recommended yoghurt-cereal-fruit snacks presented with different packaging cues. Packaging cues included a plain label, a label focusing on health aspects of the product, and a label that additionally included unknown cartoon characters. The children were asked to state the subjective taste-pleasantness of the respective food items. We also used a novel approach to measure effort provision for food items in children, namely handgrip strength. Results show that packaging cues significantly induce a taste-placebo effect in 88% of the children, i.e., differences in taste ratings for objectively identical products. Taste ratings were highest for the child-directed product that included cartoon characters. Also, applied effort to receive the child-directed product was significantly higher. Our results confirm the positive effect of child-directed marketing strategies also for healthy snack food products. Using handgrip strength as a measure to determine the amount of effort children are willing to provide for a product may explain additional variance in food choice and might prove to be a promising additional research tool for field studies and the assessment of public policy interventions.

Food packaging cues influence taste perception and increase effort provision for a recommended snack product in children.

Science.gov (United States)

Enax, Laura; Weber, Bernd; Ahlers, Maren; Kaiser, Ulrike; Diethelm, Katharina; Holtkamp, Dominik; Faupel, Ulya; Holzmüller, Hartmut H; Kersting, Mathilde

2015-01-01

Food marketing research shows that child-directed marketing cues have pronounced effects on food preferences and consumption, but are most often placed on products with low nutritional quality. Effects of child-directed marketing strategies for healthy food products remain to be studied in more detail. Previous research suggests that effort provision explains additional variance in food choice. This study investigated the effects of packaging cues on explicit preferences and effort provision for healthy food items in elementary school children. Each of 179 children rated three, objectively identical, recommended yogurt-cereal-fruit snacks presented with different packaging cues. Packaging cues included a plain label, a label focusing on health aspects of the product, and a label that additionally included unknown cartoon characters. The children were asked to state the subjective taste-pleasantness of the respective food items. We also used a novel approach to measure effort provision for food items in children, namely handgrip strength. Results show that packaging cues significantly induce a taste-placebo effect in 88% of the children, i.e., differences in taste ratings for objectively identical products. Taste ratings were highest for the child-directed product that included cartoon characters. Also, applied effort to receive the child-directed product was significantly higher. Our results confirm the positive effect of child-directed marketing strategies also for healthy snack food products. Using handgrip strength as a measure to determine the amount of effort children are willing to provide for a product may explain additional variance in food choice and might prove to be a promising additional research tool for field studies and the assessment of public policy interventions.

Food packaging cues influence taste perception and increase effort provision for a recommended snack product in children

Science.gov (United States)

Enax, Laura; Weber, Bernd; Ahlers, Maren; Kaiser, Ulrike; Diethelm, Katharina; Holtkamp, Dominik; Faupel, Ulya; Holzmüller, Hartmut H.; Kersting, Mathilde

2015-01-01

Food marketing research shows that child-directed marketing cues have pronounced effects on food preferences and consumption, but are most often placed on products with low nutritional quality. Effects of child-directed marketing strategies for healthy food products remain to be studied in more detail. Previous research suggests that effort provision explains additional variance in food choice. This study investigated the effects of packaging cues on explicit preferences and effort provision for healthy food items in elementary school children. Each of 179 children rated three, objectively identical, recommended yogurt-cereal-fruit snacks presented with different packaging cues. Packaging cues included a plain label, a label focusing on health aspects of the product, and a label that additionally included unknown cartoon characters. The children were asked to state the subjective taste-pleasantness of the respective food items. We also used a novel approach to measure effort provision for food items in children, namely handgrip strength. Results show that packaging cues significantly induce a taste-placebo effect in 88% of the children, i.e., differences in taste ratings for objectively identical products. Taste ratings were highest for the child-directed product that included cartoon characters. Also, applied effort to receive the child-directed product was significantly higher. Our results confirm the positive effect of child-directed marketing strategies also for healthy snack food products. Using handgrip strength as a measure to determine the amount of effort children are willing to provide for a product may explain additional variance in food choice and might prove to be a promising additional research tool for field studies and the assessment of public policy interventions. PMID:26191012

Mesoporous silica as carrier of antioxidant for food packaging materials

Science.gov (United States)

Buonocore, Giovanna Giuliana; Gargiulo, Nicola; Verdolotti, Letizia; Liguori, Barbara; Lavorgna, Marino; Caputo, Domenico

2014-05-01

Mesoporous silicas have been long recognized as very promising materials for the preparation of drug delivery systems. In this work SBA-15 mesoporous silica has been functionalized with amino-silane to be used as carrier of antioxidant compound in the preparation of active food packaging materials exhibiting tailored release properties. Active films have been prepared by loading the antioxidant tocopherol, the purely siliceous SBA-15 and the aminofunctionalized SBA-15 loaded with tocopherol into LDPE matrix trough a two-step process (mixing+extrusion). The aim of the present work is the study of the effect of the pore size and of the chemical functionality of the internal walls of the mesophase on the migration of tocopherol from active LDPE polymer films. Moreover, it has been proved that the addition of the active compound do not worsen the properties of the film such as optical characteristic and water vapor permeability, thus leading to the development of a material which could be favorably used mainly, but not exclusively, in the sector of food packaging.

Prospects for application of post-consumer used plastics in food packaging.

Science.gov (United States)

Miltz, J; Ram, A; Nir, M M

1997-01-01

The two most widely used polymers in packaging in recent years are polyethylene terephthalate (PET) and polyethylene (PE). The biggest fractions of these polymers are not re-utilized, in spite of the fact that they possess excellent properties even after their first application. The ban on using recycled polymers in food packaging applications and the lack of good value outlets for these materials causes them to end up in landfills. The high cost nylon, used in packaging primarily as high gas barrier laminates with PE, also finds its way to landfills. In this case, the reason is the difficulty of recycling different polymers that are incompatible. Thus, the Municipal Solid Waste (MSW) stream transferred to landfills contains many plastic packages. These packages are being blamed as a major pollutant of the environment in spite of the fact that all plastics contribute only a small percentage to the weight of the garbage in landfills. If proper and cost effective applications for the recycled polymers could be developed, the waste related to their disposal could be limited. In addition, the contribution of plastic packages to the environmental problem could be diminished. In the present paper, the possibility of sandwiching a contaminated PET layer between two layers of the virgin material was studied. The aim of the study was to determine whether such an operation could lower the migration level of contaminants from a multilayer structure (containing a recycled layer of PET) to values below the limits required by regulatory agencies. The diffusion coefficients (required to determine migration) of four organic liquids in PET were determined. As a result of the sandwiching operation, the amount of pollutant (toluene) migrating into the food simulant was reduced by two orders of magnitude. The properties of PE/nylon blends were also studied. It was found that the high gas barrier properties of nylon are preserved in the blend when proper processing conditions are used

Food Packaging and Bisphenol A and Bis(2-Ethyhexyl) Phthalate Exposure: Findings from a Dietary Intervention

OpenAIRE

Rudel, Ruthann A.; Gray, Janet M.; Engel, Connie L.; Rawsthorne, Teresa W.; Dodson, Robin E.; Ackerman, Janet M.; Rizzo, Jeanne; Nudelman, Janet L.; Brody, Julia Green

2011-01-01

Background: Bisphenol A (BPA) and bis(2-ethylhexyl) phthalate (DEHP) are high-production-volume chemicals used in plastics and resins for food packaging. They have been associated with endocrine disruption in animals and in some human studies. Human exposure sources have been estimated, but the relative contribution of dietary exposure to total intake has not been studied empirically. Objectives: To evaluate the contribution of food packaging to exposure, we measured urinary BPA and phthalate...

Estimates of dietary exposure to bisphenol A (BPA) from light metal packaging using food consumption and packaging usage data: a refined deterministic approach and a fully probabilistic (FACET) approach.

Science.gov (United States)

Oldring, P K T; Castle, L; O'Mahony, C; Dixon, J

2014-01-01

The FACET tool is a probabilistic model to estimate exposure to chemicals in foodstuffs, originating from flavours, additives and food contact materials. This paper demonstrates the use of the FACET tool to estimate exposure to BPA (bisphenol A) from light metal packaging. For exposure to migrants from food packaging, FACET uses industry-supplied data on the occurrence of substances in the packaging, their concentrations and construction of the packaging, which were combined with data from a market research organisation and food consumption data supplied by national database managers. To illustrate the principles, UK packaging data were used together with consumption data from the UK National Diet and Nutrition Survey (NDNS) dietary survey for 19-64 year olds for a refined deterministic verification. The UK data were chosen mainly because the consumption surveys are detailed, data for UK packaging at a detailed level were available and, arguably, the UK population is composed of high consumers of packaged foodstuffs. Exposures were run for each food category that could give rise to BPA from light metal packaging. Consumer loyalty to a particular type of packaging, commonly referred to as packaging loyalty, was set. The BPA extraction levels used for the 15 types of coating chemistries that could release BPA were in the range of 0.00005-0.012 mg dm(-2). The estimates of exposure to BPA using FACET for the total diet were 0.0098 (mean) and 0.0466 (97.5th percentile) mg/person/day, corresponding to 0.00013 (mean) and 0.00059 (97.5th percentile) mg kg(-1) body weight day(-1) for consumers of foods packed in light metal packaging. This is well below the current EFSA (and other recognised bodies) TDI of 0.05 mg kg(-1) body weight day(-1). These probabilistic estimates were compared with estimates using a refined deterministic approach drawing on the same input data. The results from FACET for the mean, 95th and 97.5th percentile exposures to BPA lay between the

76 FR 81363 - Temperature-Indicating Devices; Thermally Processed Low-Acid Foods Packaged in Hermetically...

Science.gov (United States)

2011-12-28

... amended FDA's regulations for thermally processed low-acid foods packaged in hermetically sealed... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 113 [Docket No. FDA-2007-N-0265] (formerly 2007N-0026) Temperature-Indicating Devices; Thermally Processed Low-Acid...

Antifungal properties of gliadin films incorporating cinnamaldehyde and application in active food packaging of bread and cheese spread foodstuffs.

Science.gov (United States)

Balaguer, Mari Pau; Lopez-Carballo, Gracia; Catala, Ramon; Gavara, Rafael; Hernandez-Munoz, Pilar

2013-09-16

Gliadin films incorporating 1.5, 3 and 5% cinnamaldehyde (g/100g protein) were tested against food-spoilage fungi Penicillium expansum and Aspergillus niger in vitro, and were employed in an active food packaging system for sliced bread and cheese spread. Gliadin films incorporating cinnamaldehyde were highly effective against fungal growth. P. expansum and A. niger were completely inhibited after storage in vitro for 10 days in the presence of films incorporating 3% cinnamaldehyde. Indeed 1.5% cinnamaldehyde was sufficient in the case of P. expansum. The amount of cinnamaldehyde retained in films after storage for 45 days at 20 °C and 0% RH was also sufficient in most cases to prevent fungal growth in vitro. Active food packaging with gliadin films incorporating 5% cinnamaldehyde increased the shelf-life of both sliced bread and cheese spread. Mold growth was observed on sliced bread after 27 days of storage at 23 °C with active packaging, whereas in the control bread packaged without the active film fungal growth appeared around the fourth day. In the cheese spread, no fungi were observed after 26 days of storage at 4 °C when the product was packaged with the active film. However, growth of fungi was observed in control packaged cheese after 16 days of storage. This work demonstrates a noteworthy potential of these novel bioplastics incorporating natural antimicrobial compounds as innovative solutions to be used in active food packaging to extend shelf-life of food products. © 2013 Elsevier B.V. All rights reserved.

Safety by design of printed multilayer materials intended for food packaging.

Science.gov (United States)

Domeño, Celia; Aznar, Margarita; Nerín, Cristina; Isella, Francesca; Fedeli, Mauro; Bosetti, Osvaldo

2017-07-01

Printing inks are commonly used in multilayer plastics materials used for food packaging, and compounds present in inks can migrate to the food either by diffusion through the multilayers or because of set-off phenomena. To avoid this problem, the right design of the packaging is crucial. This paper studies the safety by design of multilayer materials. First, the migration from four different multilayers manufactured using polyethylene terephthalate (PET), aluminium (Al) and polyethylene (PE) was determined. The structural differences among materials such as the presence of inks or lacquer coatings as well as the differences in layers position allowed the study of a safety-by-design approach. Sixty-nine different compounds were detected and identified; 49 of them were not included in the positive list of Regulation EU/10/2011 or in Swiss legislation and 15 belong to Cramer class III, which means that they have a theoretical high toxicity. Some of the compounds related to ink composition were pyrene, a compound commercially used to make dyes and dye precursors and the antioxidant Irganox 1300. The application of external lacquers decreased the concentration of some migrants but also brought the potential for new migrants coming from its composition. A final risk assessment of the material allowed evaluating food safety for different food simulants and confirm it.

Marketing foods to children and adolescents: licensed characters and other promotions on packaged foods in the supermarket.

Science.gov (United States)

Harris, Jennifer L; Schwartz, Marlene B; Brownell, Kelly D

2010-03-01

To analyse cross-promotions targeted to children and adolescents on packaging in the supermarket. On three occasions from 2006 to 2008, researchers purchased all foods in a large supermarket that included a cross-promotion on the package. A total of 397 products were categorized by promotional partner, food category, targeted age group, promotion type, product nutrition, and company policies on marketing to children. The number of products with youth-oriented cross-promotions increased by 78 % during the period examined. Overall, 71 % of cross-promotions involved third-party licensed characters and 57 % appealed primarily to children under 12 years of age; however, the use of other forms of promotions increased from 5 % of the total in 2006 to 53 % in 2008, and promotions targeting pre-school and general audiences increased from 23 % to 54 % of the total. Only 18 % of products met accepted nutrition standards for foods sold to youth, and nutritional quality declined during the period examined. Food manufacturers with policies limiting marketing to children represented 65 % of all youth-oriented cross-promotions, their use of cross-promotions increased significantly, and the nutritional quality of their products did not improve. Some media companies did reduce the use of their properties on food promotions. Overall, the supermarket environment worsened due to an increase in cross-promotions targeted to children and adolescents and a decline in the nutritional quality of these products. This analysis failed to find improvements in food marketing to youth and highlights the need to expand current industry self-regulatory pledges.

Food Preparation: An Instructional Package with Adaptations for Visually Impaired Individuals.

Science.gov (United States)

Crawford, Glinda B.; And Others

This instructional package, developed for the home economics teacher of mainstreamed visually impaired students, provides food preparation lesson plans appropriate for the junior high level. First, teacher guidelines are given, including characteristics of the visually impaired, orienting such students to the classroom, orienting class members to…

Human exposure assessment of silver and copper migrating from an antimicrobial nanocoated packaging material into an acidic food simulant.

Science.gov (United States)

Hannon, Joseph Christopher; Kerry, Joseph P; Cruz-Romero, Malco; Azlin-Hasim, Shafrina; Morris, Michael; Cummins, Enda

2016-09-01

To examine the human exposure to a novel silver and copper nanoparticle (AgNP and CuNP)/polystyrene-polyethylene oxide block copolymer (PS-b-PEO) food packaging coating, the migration of Ag and Cu into 3% acetic acid (3% HAc) food simulant was assessed at 60 °C for 10 days. Significantly lower migration was observed for Ag (0.46 mg/kg food) compared to Cu (0.82 mg/kg food) measured by inductively coupled plasma - atomic emission spectrometry (ICP-AES). In addition, no distinct population of AgNPs or CuNPs were observed in 3% HAc by nanoparticle tracking analysis (NTA) and transmission electron microscopy (TEM). The predicted human exposure to Ag and Cu was used to calculate a margin of exposure (MOE) for ionic species of Ag and Cu, which indicated the safe use of the food packaging in a hypothetical scenario (e.g. as fruit juice packaging). While migration exceeded regulatory limits, the calculated MOE suggests current migration limits may be conservative for specific nano-packaging applications. Copyright © 2016 Elsevier Ltd. All rights reserved.

Hybrid nanocellulose/nanoclay composites for food packaging applications

DEFF Research Database (Denmark)

Trifol Guzman, Jon

™ 30B) were prepared and evaluated for use in food packaging. It was determined that composites with CNF or CNC and clay led to a great reduction in the oxygen transmission rate (OTR)and the water vapour transmission rate (WVTR) (up to a 90% reduction in the OTR and 76% in theWVTR for PLA/CNF 5%/C30B 5...... to larger spherulite sizes, which had a more significant impacton water diffusion and transparency reduction but also showed an increased water sorption. Finally, it was found that cellulose nanofibers reduced water diffusion to an extent similar to C30B (21% vs.27%), while hybrid composites showed 49......% decrease, albeit CNF based composites showed increased water sorption (7% for PLA/CNF 1% composite and 9% for PLA/CNF 1%/C30B 1% when compared with neat PLA).The reduced diffusivity of the hybrid nanocomposites suggested that the material was promising for active packaging, since low diffusivity leads...

Simulation study ε-Caprolactam monomer and metallic elements migration from irradiated polymeric packaging into food stimulants

International Nuclear Information System (INIS)

Rosa, Faena Machado Leite

2008-01-01

For decades migration study of chemical compounds from packaging into food, such as metals, residual monomers and additives, is a very important issue, concerning public health and minimize chemical contamination. In this work, it was done irradiations of packagings taken in contact with food simulant, and it was studied this migration through a mathematical model of the diffusion process, compiled in a computational simulation method in order to study the microscopic behavior of migration of metallic elements cadmium, chromium, antimony and cobalt, present in metallic plastics from dairy product packagings, and also the migration of - caprolactam monomer, present in nylon polymeric plastics used for package meat stuffs, to the food simulant acetic acid 3%. The results from simulations of the migration of -caprolactam monomer were compared with experimental results obtained from high resolution gas chromatography (HRGC) measurements, and the simulation of metallic elements migration were compared with the neutron activation analysis measurements (NAA). These experimental results were performed and kindly informed by another research groups, partners in this project. The food packaging system was discretized in one-dimension space and in time and the partial differential equation that defines the diffusive process, the second 'Fick's law', together with an equation of Arrhenius type dealing with the thermal influence, were solved using finite differences. The final step of the resolution was a tridiagonal linear system, solved using the Thomas algorithm. It was studied, and in some cases even foreseen, experimental quantities, like the diffusion coefficient, activation energy and concentration profile of migrant compounds, allowing the understanding of the diffusion process and the quantitative estimate of the migration of such compounds under ionizing radiation influence. Variation on the initial concentration levels (C 0 ) of the monomer inside the packaging

Changes in the specific migration characteristics of packaging-food simulant combinations caused by ionizing radiation: Effect of food simulant

Science.gov (United States)

Zygoura, Panagiota D.; Paleologos, Evangelos K.; Kontominas, Michael G.

2011-08-01

The primary objective of the present study was to evaluate the extent to which the affinity of the surrounding medium for the migrant, as well as the packaging material, affects the specific migration characteristics of the latter. For this purpose, migration tests were conducted with vinylidene chloride copolymer (PVDC/PVC) in contact with the EU specified solvents simulating all food types: namely, distilled water, 3% w/v acetic acid, 10% v/v ethanol and isooctane. Migration testing was carried out at 40 °C for 10 days for the aqueous simulants, and at 20 °C for 2 days for the fatty food simulant (EC, 1997; EEC, 1993). In addition, food-grade saran film was subjected to ionizing radiation treatment with a [60Co] source at doses equal to 5, 15 and 25 kGy. Acetyl tributyl citrate (ATBC) plasticizer levels were monitored as a function of time for untreated, as well as gamma-irradiated packaging material, with a secondary objective to investigate the effect of ionizing radiation on polymer/migrant/surrounding medium interactions. Depending on the food simulant, determination of the analyte was performed by either direct gas chromatographic analysis, or surfactant (Triton X-114) mediated extraction followed by gas chromatographic-flame ionization detection (GC-FID). ATBC concentrations determined in aqueous and fatty food simulants were 0.216-0.497 and 5.0-5.9 mg/L, respectively. Therefore, the most efficient extracting medium of plasticizers in vinyl chloride copolymers is the non-polar isooctane. Moreover, an extremely high rate of ATBC migration into isooctane during the early stages of contact was observed. The above observation verifies the aggressiveness of isooctane towards plastic packaging materials. Amongst the aqueous food simulants tested, the 10% ethanol solution demonstrated the highest migration levels. Gamma-irradiation enhanced ATBC migration; specific migration levels increased with increasing contact time and radiation dose. This was expected

Changes in the specific migration characteristics of packaging-food simulant combinations caused by ionizing radiation: Effect of food simulant

International Nuclear Information System (INIS)

Zygoura, Panagiota D.; Paleologos, Evangelos K.; Kontominas, Michael G.

2011-01-01

The primary objective of the present study was to evaluate the extent to which the affinity of the surrounding medium for the migrant, as well as the packaging material, affects the specific migration characteristics of the latter. For this purpose, migration tests were conducted with vinylidene chloride copolymer (PVDC/PVC) in contact with the EU specified solvents simulating all food types: namely, distilled water, 3% w/v acetic acid, 10% v/v ethanol and isooctane. Migration testing was carried out at 40 o C for 10 days for the aqueous simulants, and at 20 o C for 2 days for the fatty food simulant (). In addition, food-grade saran film was subjected to ionizing radiation treatment with a [ 60 Co] source at doses equal to 5, 15 and 25 kGy. Acetyl tributyl citrate (ATBC) plasticizer levels were monitored as a function of time for untreated, as well as gamma-irradiated packaging material, with a secondary objective to investigate the effect of ionizing radiation on polymer/migrant/surrounding medium interactions. Depending on the food simulant, determination of the analyte was performed by either direct gas chromatographic analysis, or surfactant (Triton X-114) mediated extraction followed by gas chromatographic-flame ionization detection (GC-FID). ATBC concentrations determined in aqueous and fatty food simulants were 0.216-0.497 and 5.0-5.9 mg/L, respectively. Therefore, the most efficient extracting medium of plasticizers in vinyl chloride copolymers is the non-polar isooctane. Moreover, an extremely high rate of ATBC migration into isooctane during the early stages of contact was observed. The above observation verifies the aggressiveness of isooctane towards plastic packaging materials. Amongst the aqueous food simulants tested, the 10% ethanol solution demonstrated the highest migration levels. Gamma-irradiation enhanced ATBC migration; specific migration levels increased with increasing contact time and radiation dose. This was expected, since ATBC did not

Changes in the specific migration characteristics of packaging-food simulant combinations caused by ionizing radiation: Effect of food simulant

Energy Technology Data Exchange (ETDEWEB)

Zygoura, Panagiota D., E-mail: me00806@cc.uoi.g [Laboratory of Food Chemistry and Technology, Department of Chemistry, University of Ioannina, GR-45110 Ioannina (Greece); Paleologos, Evangelos K.; Kontominas, Michael G. [Laboratory of Food Chemistry and Technology, Department of Chemistry, University of Ioannina, GR-45110 Ioannina (Greece)

2011-08-15

The primary objective of the present study was to evaluate the extent to which the affinity of the surrounding medium for the migrant, as well as the packaging material, affects the specific migration characteristics of the latter. For this purpose, migration tests were conducted with vinylidene chloride copolymer (PVDC/PVC) in contact with the EU specified solvents simulating all food types: namely, distilled water, 3% w/v acetic acid, 10% v/v ethanol and isooctane. Migration testing was carried out at 40 {sup o}C for 10 days for the aqueous simulants, and at 20 {sup o}C for 2 days for the fatty food simulant (). In addition, food-grade saran film was subjected to ionizing radiation treatment with a [{sup 60}Co] source at doses equal to 5, 15 and 25 kGy. Acetyl tributyl citrate (ATBC) plasticizer levels were monitored as a function of time for untreated, as well as gamma-irradiated packaging material, with a secondary objective to investigate the effect of ionizing radiation on polymer/migrant/surrounding medium interactions. Depending on the food simulant, determination of the analyte was performed by either direct gas chromatographic analysis, or surfactant (Triton X-114) mediated extraction followed by gas chromatographic-flame ionization detection (GC-FID). ATBC concentrations determined in aqueous and fatty food simulants were 0.216-0.497 and 5.0-5.9 mg/L, respectively. Therefore, the most efficient extracting medium of plasticizers in vinyl chloride copolymers is the non-polar isooctane. Moreover, an extremely high rate of ATBC migration into isooctane during the early stages of contact was observed. The above observation verifies the aggressiveness of isooctane towards plastic packaging materials. Amongst the aqueous food simulants tested, the 10% ethanol solution demonstrated the highest migration levels. Gamma-irradiation enhanced ATBC migration; specific migration levels increased with increasing contact time and radiation dose. This was expected, since

Package design and nutritional profile of foods targeted at children in supermarkets in Montevideo, Uruguay.

Science.gov (United States)

Giménez, Ana; Saldamando, Luis de; Curutchet, María Rosa; Ares, Gastón

2017-06-12

Marketing of unhealthy products has been identified as one of the main characteristics of the food environment that negatively affects children's eating patterns. Restrictions on advertising of unhealthy foods to children have already been imposed in different countries. However, marketing strategies are not limited to broadcast and digital advertising, but also include package design. In this context, the current study aimed to describe the food products targeted at children and sold in supermarkets in Montevideo, Uruguay, in terms of package design and nutrient profile. Two supermarkets in Montevideo were selected for data collection. In each supermarket, all products targeted at children were identified. Products were analyzed in terms of package design and nutritional profile, considering the Pan American Health Organization Nutrient Profile Model. A total of 180 unique products were identified, which included a wide range of product categories. The great majority of the products corresponded to ultra-processed products with excessive amounts of sodium, free sugars, total fat, saturated fat, and/or trans fat, which are not recommended for frequent consumption. Several marketing strategies were identified in the design of packages to attract children's attention and drive their preferences. The most common strategies were the inclusion of cartoon characters, bright colors, childish lettering, and a wide range of claims related to health and nutrition, as well as the products' sensory and hedonic characteristics. The study's findings provide additional evidence on the need to regulate packaging of products targeted at children.

The role of packaging in preserving the quality of food

International Nuclear Information System (INIS)

Varsanyi, I.

1979-01-01

The causes of food decomposition and the different conserving methods are reviewed. Among the physical conserving procedures the ionizing gamma and electron radiations are more and more widely used. The applied radiation dose is intended to exterminate even the most resistant microorganisms, e.g. the spores of Clostridium botulinum, but it should not damage the food product. The appropiate packaging material should be chosen according to the conserving technology, as radiation may alter the consistence of modern plastics (they become more rigid or fragile) or chemical disintegration can be induced rendering the product unenjoyable. (L.E.)

[Analysis of phthalates in plastic food-packaging bags by thin layer chromatography].

Science.gov (United States)

Chen, Hui; Wang, Yuan; Zhu, Ruohua

2006-01-01

The method for simultaneous determination of four phthalates, namely dimethyl phthalate (DMP), diethyl phthalate (DEP), di-n-butyl phthalate (DBP) and di (2-ethylhexyl) phthalate (DEHP) in plastic food-packaging bags by thin layer chromatography (TLC) was developed. The plastic food-packaging bags were extracted with ethanol by ultrasonication, then the mixture was filtrated through membrane (0.45 microm). The mixture of ethyl acetate-anhydrous ether-isooctane (1 : 4 : 15, v/v) was used as developing agent on the TLC silica gel plate for development. The filtered liquid was spotted on the TLC plate dealt by acetone, and detected with scanning wavelength of 275 nm and reference wavelength of 340 nm. The qualitative analysis of the phthalates was performed using the R(f) values of the chromatogram. The quantitative analysis was performed with external standard method. Good linearities were obtained for DMP, DEP, DBP and DEHP. The detection limits were 2.1 ng for DMP, 2.4 ng for DEP, 3.4 ng for DBP and 4.0 ng for DEHP. The relative standard deviations (RSDs) of the four phthalates were 2.8% - 3.5%. The recoveries of the four phthalate standards in real sample were 78.58% - 111.04%. The method presented has the advantages of high precision, high sensitivity, small sample size, and simple pretreatment . The method was used to detect the four phthalates in the food-packaging bags. The contents in real samples were close to the results by gas chromatography.

Declaration of nutrition information on and nutritional quality of Thai ready-to-eat packaged food products.

Science.gov (United States)

Pongutta, Suladda; Chongwatpol, Pitipa; Tantayapirak, Parwin; Vandevijvere, Stefanie

2018-06-01

The present study assessed the nutrition information displayed on ready-to-eat packaged foods and the nutritional quality of those food products in Thailand. In March 2015, the nutrition information panels and nutrition and health claims on ready-to-eat packaged foods were collected from the biggest store of each of the twelve major retailers, using protocols developed by the International Network for Food and Obesity/Non-communicable Diseases Research, Monitoring and Action Support (INFORMAS). The Thai Nutrient Profile Model was used to classify food products according to their nutritional quality as 'healthier' or 'less healthy'. In total, information from 7205 food products was collected across five broad food categories. Out of those products, 5707 (79·2 %), 2536 (35·2 %) and 1487 (20·6 %) carried a nutrition facts panel, a Guideline Daily Amount (GDA) label and health-related claims, respectively. Only 4691 (65·1 %) and 2484 (34·5 %) of the products that displayed the nutrition facts or a GDA label, respectively, followed the guidelines of the Thai Food and Drug Administration. In total, 4689 products (65·1 %) could be classified according to the Thai Nutrient Profile Model, of which 432 products (9·2 %) were classified as healthier. Moreover, among the 1487 products carrying health-related claims, 1219 (82·0 %) were classified as less healthy. Allowing less healthy food products to carry claims could mislead consumers and result in overconsumption of ready-to-eat food products. The findings suggest effective policies should be implemented to increase the relative availability of healthier ready-to-eat packaged foods, as well as to improve the provision of nutrition information on labels in Thailand.

Assessing direct analysis in real-time-mass spectrometry (DART-MS) for the rapid identification of additives in food packaging.

Science.gov (United States)

Ackerman, L K; Noonan, G O; Begley, T H

2009-12-01

The ambient ionization technique direct analysis in real time (DART) was characterized and evaluated for the screening of food packaging for the presence of packaging additives using a benchtop mass spectrometer (MS). Approximate optimum conditions were determined for 13 common food-packaging additives, including plasticizers, anti-oxidants, colorants, grease-proofers, and ultraviolet light stabilizers. Method sensitivity and linearity were evaluated using solutions and characterized polymer samples. Additionally, the response of a model additive (di-ethyl-hexyl-phthalate) was examined across a range of sample positions, DART, and MS conditions (temperature, voltage and helium flow). Under optimal conditions, molecular ion (M+H+) was the major ion for most additives. Additive responses were highly sensitive to sample and DART source orientation, as well as to DART flow rates, temperatures, and MS inlet voltages, respectively. DART-MS response was neither consistently linear nor quantitative in this setting, and sensitivity varied by additive. All additives studied were rapidly identified in multiple food-packaging materials by DART-MS/MS, suggesting this technique can be used to screen food packaging rapidly. However, method sensitivity and quantitation requires further study and improvement.

Non-Foil High Barrier Food Packaging Materials for Human Centered Spacecrafts, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — This project aims to develop food packaging technologies for extending shelf-live toward maintaining healthy diet and psychological well being of the space crew. The...

Analytical strategies for organic food packaging contaminants.

Science.gov (United States)

Sanchis, Yovana; Yusà, Vicent; Coscollà, Clara

2017-03-24

In this review, we present current approaches in the analysis of food-packaging contaminants. Gas and liquid chromatography coupled to mass spectrometry detection have been widely used in the analysis of some relevant families of these compounds such as primary aromatic amines, bisphenol A, bisphenol A diglycidyl ether and related compounds, UV-ink photoinitiators, perfluorinated compounds, phthalates and non-intentionally added substances. Main applications for sample treatment and different types of food-contact material migration studies have been also discussed. Pressurized Liquid Extraction, Solid-Phase Microextraction, Focused Ultrasound Solid-Liquid Extraction and Quechers have been mainly used in the extraction of food contact material (FCM) contaminants, due to the trend of minimising solvent consumption, automatization of sample preparation and integration of extraction and clean-up steps. Recent advances in analytical methodologies have allowed unequivocal identification and confirmation of these contaminants using Liquid Chromatography coupled to High Resolution Mass Spectrometry (LC-HRMS) through mass accuracy and isotopic pattern applying. LC-HRMS has been used in the target analysis of primary aromatic amines in different plastic materials, but few studies have been carried out applying this technique in post-target and non-target analysis of FCM contaminants. Copyright © 2017 Elsevier B.V. All rights reserved.

Child-directed and nutrition-focused marketing cues on food packaging: links to nutritional content.

Science.gov (United States)

Lapierre, Matthew A; Brown, Autumn M; Houtzer, Hunter V; Thomas, Tyler J

2017-04-01

We tested whether the presence of both child-targeted and nutrition-focused (i.e. parent-targeted) marketing cues on food packaging was associated with the nutritional content of these products. We conducted a quantitative content analysis of 403 food packages chosen randomly from the supermarket's online portal along with all products (n 312) from the cereal aisle in a supermarket from the Southeastern USA. We examined main and interaction effects for cues on nutritional content (e.g. energy density, sugar, sodium, fibre). A regional supermarket chain in the Southeastern USA. Tests of main effects indicated that increased presence of nutritional cues was linked to more nutritious content (e.g. less sugar, less saturated fat, more fibre) while the increased presence of child-targeted cues was uniformly associated with less nutritious content (e.g. more sugar, less protein, less fibre). Among the interaction effects, results revealed that products with increased nutrition-focused and child-targeted cues were likely to contain significantly more sugar and less protein than other products. Products that seek to engage children with their packaging in the supermarket are significantly less nutritious than foods that do not, while product packages that suggest nutritional benefits have more nutritious content. More importantly, the study provides evidence that those products which try to engage both child and parent consumers are significantly less healthy in crucial ways (e.g. more sugar, less fibre) than products that do not.

Edible packaging materials.

Science.gov (United States)

Janjarasskul, Theeranun; Krochta, John M

2010-01-01

Research groups and the food and pharmaceutical industries recognize edible packaging as a useful alternative or addition to conventional packaging to reduce waste and to create novel applications for improving product stability, quality, safety, variety, and convenience for consumers. Recent studies have explored the ability of biopolymer-based food packaging materials to carry and control-release active compounds. As diverse edible packaging materials derived from various by-products or waste from food industry are being developed, the dry thermoplastic process is advancing rapidly as a feasible commercial edible packaging manufacturing process. The employment of nanocomposite concepts to edible packaging materials promises to improve barrier and mechanical properties and facilitate effective incorporation of bioactive ingredients and other designed functions. In addition to the need for a more fundamental understanding to enable design to desired specifications, edible packaging has to overcome challenges such as regulatory requirements, consumer acceptance, and scaling-up research concepts to commercial applications.

Evaluation of the genotoxicity of chitosan nanoparticles for use in food packaging films.

Science.gov (United States)

De Lima, Renata; Feitosa, Leandro; do Espírito Santo Pereira, Anderson; de Moura, Márcia Regina; Ahmad Aouada, Fauze; Henrique Capparelli Mattoso, Luiz; Fernandes Fraceto, Leonardo

2010-08-01

The use of nanoparticles in food packaging has been proposed on the basis that it could improve protection of foods by, for example, reducing permeation of gases, minimizing odor loss, and increasing mechanical strength and thermal stability. Consequently, the impacts of such nanoparticles on organisms and on the environment need to be investigated to ensure their safe use. In an earlier study, Moura and others (2008a) described the effect of addition of chitosan (CS) and poly(methacrylic acid) (PMAA) nanoparticles on the mechanical properties, water vapor, and oxygen permeability of hydroxypropyl methylcellulose films used in food packaging. Here, the genotoxicity of different polymeric CS/PMAA nanoparticles (size 60, 82, and 111 nm) was evaluated at different concentration levels, using the Allium cepa chromosome damage test as well as cytogenetic tests employing human lymphocyte cultures. Test substrates were exposed to solutions containing nanoparticles at polymer mass concentrations of 1.8, 18, and 180 mg/L. Results showed no evidence of DNA damage caused by the nanoparticles (no significant numerical or structural changes were observed), however the 82 and 111 nm nanoparticles reduced mitotic index values at the highest concentration tested (180 mg/L), indicating that the nanoparticles were toxic to the cells used at this concentration. In the case of the 60 nm CS/PMAA nanoparticles, no significant changes in the mitotic index were observed at the concentration levels tested, indicating that these particles were not toxic. The techniques used show promising potential for application in tests of nanoparticle safety envisaging the future use of these materials in food packaging.

World Overview of Packaging Materials for Food Based on Zeolite

Directory of Open Access Journals (Sweden)

Bondarenko Evgeniya

2016-11-01

Full Text Available The paper studies the world experience of using zeolites in manufacturing food packaging materials with a view to extend food storage. Antimicrobial properties of zeolites are confirmed by the results of the re-search of antifungal mixture for prolongation of food products shelf life. They correlate with the experience of using the mixture in agriculture as a fungicide and preservative for corn, root crops, sunflower, silage. The ability of zeolites to inactivate pathogens and accelerate excretion of metabolic products from the human body as well as products of disturbed metabolism and toxic compounds derived from the environment was considered. In medicine almost all zeolites are used as highly effective sorbents, and it is confirmed by the positive results of their use in the treatment of poisoning and other intoxications, and for their prevention. Thus, they can be used as raw materials in the development of food with detoxicative properties for people who face food, environmental or occupational poisoning. Bentonite (representative of zeolites, established to meet FDA requirements to contact with food, is included into the List of food additives (E 558. It has the official permission to be used in the food industry and can be used in the development of food products for special purposes.

Package design and nutritional profile of foods targeted at children in supermarkets in Montevideo, Uruguay

Directory of Open Access Journals (Sweden)

Ana Giménez

Full Text Available Abstract: Marketing of unhealthy products has been identified as one of the main characteristics of the food environment that negatively affects children’s eating patterns. Restrictions on advertising of unhealthy foods to children have already been imposed in different countries. However, marketing strategies are not limited to broadcast and digital advertising, but also include package design. In this context, the current study aimed to describe the food products targeted at children and sold in supermarkets in Montevideo, Uruguay, in terms of package design and nutrient profile. Two supermarkets in Montevideo were selected for data collection. In each supermarket, all products targeted at children were identified. Products were analyzed in terms of package design and nutritional profile, considering the Pan American Health Organization Nutrient Profile Model. A total of 180 unique products were identified, which included a wide range of product categories. The great majority of the products corresponded to ultra-processed products with excessive amounts of sodium, free sugars, total fat, saturated fat, and/or trans fat, which are not recommended for frequent consumption. Several marketing strategies were identified in the design of packages to attract children’s attention and drive their preferences. The most common strategies were the inclusion of cartoon characters, bright colors, childish lettering, and a wide range of claims related to health and nutrition, as well as the products’ sensory and hedonic characteristics. The study’s findings provide additional evidence on the need to regulate packaging of products targeted at children.

Applications of Active Packaging in Breads

Directory of Open Access Journals (Sweden)

Ali Göncü

2017-10-01

Full Text Available Changes on consumer preferences lead to innovations and improvements in new packaging technologies. With these new developments passive packaging technologies aiming to protect food nowadays have left their place to active and intelligent packaging technologies that have other various functions beside protection of food. Active packaging is defined as an innovative packaging type and its usage increases the shelf life of food significantly. Applications of active packaging have begun to be used for packaging of breads. In this study active packaging applications in breads have been reviewed.

Nanotechnology for the Solid Waste Reduction of Military Food Packaging

Science.gov (United States)

2016-06-01

WP-200816) Nanotechnology for the Solid Waste Reduction of Military Food Packaging June 2016 This document has been cleared for public release...NAME OF RESPONSIBLE PERSON 19b. TELEPHONE NUMBER (Include area code) 01/06/2016 Cost and Performance Report 04/01/2008 - 01/01/2015 Nanotechnology for...Soldier Research, Development and Engineering Center Robin Altmeyer - AmeriQual U.S. Army Natick Soldier Research, Development and Engineering

Exposure to perfluorinated compounds in Catalonia, Spain, through consumption of various raw and cooked foodstuffs, including packaged food.

Science.gov (United States)

Jogsten, Ingrid Ericson; Perelló, Gemma; Llebaria, Xavier; Bigas, Esther; Martí-Cid, Roser; Kärrman, Anna; Domingo, José L

2009-07-01

In this study, the role that some food processing and packaging might play as a source of perfluorinated compounds (PFCs) through the diet was assessed. The levels of PFCs were determined in composite samples of veal steak (raw, grilled, and fried), pork loin (raw, grilled, and fried), chicken breast (raw, grilled, and fried), black pudding (uncooked), liver lamb (raw), marinated salmon (home-made and packaged), lettuce (fresh and packaged), pate of pork liver, foie gras of duck, frankfurt, sausages, chicken nuggets (fried), and common salt. Among the 11 PFCs analyzed, only PFHxS, PFOS, PFHxA, and PFOA were detected in at least one composite sample, while the levels of the remaining PFCs (PFBuS, PFHpA, PFNA, PFDA, PFUnDA, and PFDoDA) were under their respective detection limits. PFOS was the compound most frequently detected, being found in 8 of the 20 food items analyzed, while PFHxA was detected in samples of raw veal, chicken nuggets, frankfurt, sausages, and packaged lettuce. According to the results of the present study, it is not sufficiently clear if cooking with non-stick cookware, or packaging some foods, could contribute to a higher human exposure to PFCs.

Effects of retail style or food service style packaging type and storage time on sensory characteristics of bacon manufactured from commercially sourced pork bellies.

Science.gov (United States)

Lowe, B K; Bohrer, B M; Holmer, S F; Boler, D D; Dilger, A C

2014-06-01

Objectives were to characterize differences in pork bellies that were stored frozen for different durations prior to processing and characterize sensory properties of the bacon derived from those bellies when stored in either retail or food service style packaging. Bellies (n = 102) were collected from 4 different time periods, fresh bellies (never frozen) and bellies frozen for 2, 5, or 7 mo, and manufactured into bacon under commercial conditions. Food service bacon was packaged in oxygen-permeable polyvinyl lined boxes layered on wax-covered lined paper and blast frozen (-33 °C) for 45 or 90 d after slicing. Retail bacon was vacuum-packaged in retail packages and refrigerated (2 °C) in the dark for 60 or 120 d after slicing. At the end of respective storage times after slicing, bacon was analyzed for sensory attributes and lipid oxidation. Off-flavor and oxidized odor of bacon increased (P food service packaged bacon from frozen bellies, but was unchanged (P ≥ 0.07) with time in food service packaged bacon from fresh bellies. Lipid oxidation was also unchanged (P ≥ 0.21) over time in retail packaged bacon, with the exception of bellies frozen for 5 mo, which was increased from day 0 to day 90. Overall, off-flavor, oxidized odor, and lipid oxidation increased as storage time after processing increased. Freezing bellies before processing may exacerbate lipid oxidation as storage time after processing was extended. Bacon can be packaged and managed several different ways before it reaches the consumer. This research simulated food service (frozen) and retail packaged (refrigerated) bacon over a range of storage times after slicing. Off-flavor and oxidized odor increased as storage time after processing increased in both packaging types. Lipid oxidation increased as storage time after slicing increased to a greater extent in food service packaging. © 2014 Institute of Food Technologists®

Quality and safety aspects of reusable plastic food packaging materials : influence of reuse on intrinsic properties

NARCIS (Netherlands)

Jetten, J.; Kruijf, N. de

2002-01-01

The aim of the project was to develop a comprehensive package of quality assurance criteria for use by the industry and by regulatory authorities to ensure the quality and safety-in-use (sensory, microbiological and chemical safety) of reused plastics for food packaging. The paper describes the

Prevalence of Nutrition and Health-Related Claims on Pre-Packaged Foods: A Five-Country Study in Europe.

Science.gov (United States)

Hieke, Sophie; Kuljanic, Nera; Pravst, Igor; Miklavec, Krista; Kaur, Asha; Brown, Kerry A; Egan, Bernadette M; Pfeifer, Katja; Gracia, Azucena; Rayner, Mike

2016-03-03

This study is part of the research undertaken in the EU funded project CLYMBOL ("Role of health-related CLaims and sYMBOLs in consumer behaviour"). The first phase of this project consisted of mapping the prevalence of symbolic and non-symbolic nutrition and health-related claims (NHC) on foods and non-alcoholic beverages in five European countries. Pre-packaged foods and drinks were sampled based on a standardized sampling protocol, using store lists or a store floor plan. Data collection took place across five countries, in three types of stores. A total of 2034 foods and drinks were sampled and packaging information was analyzed. At least one claim was identified for 26% (95% CI (24.0%-27.9%)) of all foods and drinks sampled. Six percent of these claims were symbolic. The majority of the claims were nutrition claims (64%), followed by health claims (29%) and health-related ingredient claims (6%). The most common health claims were nutrient and other function claims (47% of all claims), followed by disease risk reduction claims (5%). Eight percent of the health claims were children's development and health claims but these were only observed on less than 1% (0.4%-1.1%) of the foods. The category of foods for specific dietary use had the highest proportion of NHC (70% of foods carried a claim). The prevalence of symbolic and non-symbolic NHC varies across European countries and between different food categories. This study provides baseline data for policy makers and the food industry to monitor and evaluate the use of claims on food packaging.

Comparative Packaging Study

Science.gov (United States)

Perchonok, Michele H.; Oziomek, Thomas V.

2009-01-01

Future long duration manned space flights beyond low earth orbit will require the food system to remain safe, acceptable and nutritious. Development of high barrier food packaging will enable this requirement by preventing the ingress and egress of gases and moisture. New high barrier food packaging materials have been identified through a trade study. Practical application of this packaging material within a shelf life test will allow for better determination of whether this material will allow the food system to meet given requirements after the package has undergone processing. The reason to conduct shelf life testing, using a variety of packaging materials, stems from the need to preserve food used for mission durations of several years. Chemical reactions that take place during longer durations may decrease food quality to a point where crew physical or psychological well-being is compromised. This can result in a reduction or loss of mission success. The rate of chemical reactions, including oxidative rancidity and staling, can be controlled by limiting the reactants, reducing the amount of energy available to drive the reaction, and minimizing the amount of water available. Water not only acts as a media for microbial growth, but also as a reactant and means by which two reactants may come into contact with each other. The objective of this study is to evaluate three packaging materials for potential use in long duration space exploration missions.

Novel Random PBS-Based Copolymers Containing Aliphatic Side Chains for Sustainable Flexible Food Packaging

Directory of Open Access Journals (Sweden)

Giulia Guidotti

2017-12-01

Full Text Available In the last decade, there has been an increased interest from the food packaging industry toward the development and application of biodegradable and biobased plastics, to contribute to the sustainable economy and to reduce the huge environmental problem afflicting the planet. In this framework, the present paper describes the synthesis of novel PBS (poly(butylene succinate-based random copolymers with different composition containing glycol sub-units characterized by alkyl pendant groups of different length. The prepared samples were subjected to molecular, thermal, diffractometric and mechanical characterization. The barrier performances to O2, CO2 and N2 gases were also evaluated, envisioning for these new materials an application in food packaging. The presence of the side alkyl groups did not alter the thermal stability, whereas it significantly reduced the sample crystallinity degree, making these materials more flexible. The barrier properties were found to be worse than PBS; however, some of them were comparable to, or even better than, those of Low Density Polyethylene (LDPE, widely employed for flexible food packaging. The entity of variations in the final properties due to copolymerization were more modest in the case of the co-unit with short side methyl groups, which, when included in the PBS crystal lattice, causes a more modest decrement of crystallinity degree.

Packaging-radiation disinfestation relationships

International Nuclear Information System (INIS)

Highland, H.A.

1985-01-01

Foods that are susceptible to insect infestation can be irradiated to destroy the infestation; however, the food must be kept essentially insect-free until consumed, or it must be disinfested again, perhaps repeatedly. Insect-resistant packages can be used to prevent reinfestation, but there are certain requirements that must be fulfilled before a package can be made insect resistant. These include the use of insect-light construction and packaging materials that resist boring insects. The relative insect resistance of various packages and packaging materials is discussed, as are behavior traits such as egressive boring that enables insects to escape from packages and the ability of insects to climb on various packaging materials. Some successful and unsuccessful attempts to make various types of packages insect resistant are discussed, as are factors that must be considered in the selection or development of insect-resistant packages for radiation disinfested foods. The latter factors include biological and physical environments, length of storage periods, stresses on packages during shipment, types of storage facilities, governmental regulations, health requirements, and others

Effect of γ-irradiation on commercial polypropylene based mono and multi-layered retortable food packaging materials

Science.gov (United States)

George, Johnsy; Kumar, R.; Sajeevkumar, V. A.; Sabapathy, S. N.; Vaijapurkar, S. G.; Kumar, D.; Kchawahha, A.; Bawa, A. S.

2007-07-01

Irradiation processing of food in the prepackaged form may affect chemical and physical properties of the plastic packaging materials. The effect of γ-irradiation doses (2.5-10.0 kGy) on polypropylene (PP)-based retortable food packaging materials, were investigated using Fourier transform infrared (FTIR) spectroscopic analysis, which revealed the changes happening to these materials after irradiation. The mechanical properties decreased with irradiation while oxygen transmission rate (OTR) was not affected significantly. Colour measurement indicated that Nylon 6 containing multilayer films became yellowish after irradiation. Thermal characterization revealed the changes in percentage crystallinity.

Effect of γ-irradiation on commercial polypropylene based mono and multi-layered retortable food packaging materials

International Nuclear Information System (INIS)

George, Johnsy; Kumar, R.; Sajeevkumar, V.A.; Sabapathy, S.N.; Vaijapurkar, S.G.; Kumar, D.; Kchawahha, A.; Bawa, A.S.

2007-01-01

Irradiation processing of food in the prepackaged form may affect chemical and physical properties of the plastic packaging materials. The effect of γ-irradiation doses (2.5-10.0 kGy) on polypropylene (PP)-based retortable food packaging materials, were investigated using Fourier transform infrared (FTIR) spectroscopic analysis, which revealed the changes happening to these materials after irradiation. The mechanical properties decreased with irradiation while oxygen transmission rate (OTR) was not affected significantly. Colour measurement indicated that Nylon 6 containing multilayer films became yellowish after irradiation. Thermal characterization revealed the changes in percentage crystallinity

Effect of {gamma}-irradiation on commercial polypropylene based mono and multi-layered retortable food packaging materials

Energy Technology Data Exchange (ETDEWEB)

George, Johnsy [Defence Food Research Laboratory, Siddarthanagar, Mysore, Karnataka 570011 (India)]. E-mail: g.johnsy@gmail.com; Kumar, R. [Defence Food Research Laboratory, Siddarthanagar, Mysore, Karnataka 570011 (India); Sajeevkumar, V.A. [Defence Food Research Laboratory, Siddarthanagar, Mysore, Karnataka 570011 (India); Sabapathy, S.N. [Defence Food Research Laboratory, Siddarthanagar, Mysore, Karnataka 570011 (India); Vaijapurkar, S.G. [Defence Laboratory, Ratanada Palace, Jodhpur, Rajastan 342011 (India); Kumar, D. [Defence Laboratory, Ratanada Palace, Jodhpur, Rajastan 342011 (India); Kchawahha, A. [Defence Laboratory, Ratanada Palace, Jodhpur, Rajastan 342011 (India); Bawa, A.S. [Defence Food Research Laboratory, Siddarthanagar, Mysore, Karnataka 570011 (India)

2007-07-15

Irradiation processing of food in the prepackaged form may affect chemical and physical properties of the plastic packaging materials. The effect of {gamma}-irradiation doses (2.5-10.0 kGy) on polypropylene (PP)-based retortable food packaging materials, were investigated using Fourier transform infrared (FTIR) spectroscopic analysis, which revealed the changes happening to these materials after irradiation. The mechanical properties decreased with irradiation while oxygen transmission rate (OTR) was not affected significantly. Colour measurement indicated that Nylon 6 containing multilayer films became yellowish after irradiation. Thermal characterization revealed the changes in percentage crystallinity.

FOOD-PACKAGING INTERACTION ON THE STABILITY OF CANNED SWEETENED CUPUAÇU (Theobroma grandiflorum Schum. PUREE

Directory of Open Access Journals (Sweden)

MARIA TERESA DE ALVARENGA FREIRE

2016-01-01

Full Text Available Cupuaçu ( Theobroma grandiflorum Schum. is an exotic fruit with a promising economic potential, particularly due to its strong aroma and creamy texture. This study aimed to produce sweetened cupuaçu puree and evaluate the effects of packaging corrosion on its sensory properties and shelf - life in tinplated cans. After 240 days of storage, the commercially sterile product had average sensory analysis scores of 5.89 ± 0.21, 5.39 ± 0.30, 5.45 ± 0.21 and 5.49 ± 0.25, for appearance, aroma, flavor and overall appreciation, respectively. Sensory acceptance scores did not change during storage (p>0.05. Corrosion potential and low tin and iron levels in the product, which are parameters used to evaluate food - packaging interaction, demonstrated the product remained food - safe throughout its shelf - life. Tinplate is a promising packaging material for sweetened cupuaçu puree due to its mechanical and protective properties. Furthermore, tin plating is an economically viable food technology to extend the shelf - life of cupuaçu products and expand its domestic and international markets.

High-throughput migration modelling for estimating exposure to chemicals in food packaging in screening and prioritization tools.

Science.gov (United States)

Ernstoff, Alexi S; Fantke, Peter; Huang, Lei; Jolliet, Olivier

2017-11-01

Specialty software and simplified models are often used to estimate migration of potentially toxic chemicals from packaging into food. Current models, however, are not suitable for emerging applications in decision-support tools, e.g. in Life Cycle Assessment and risk-based screening and prioritization, which require rapid computation of accurate estimates for diverse scenarios. To fulfil this need, we develop an accurate and rapid (high-throughput) model that estimates the fraction of organic chemicals migrating from polymeric packaging materials into foods. Several hundred step-wise simulations optimised the model coefficients to cover a range of user-defined scenarios (e.g. temperature). The developed model, operationalised in a spreadsheet for future dissemination, nearly instantaneously estimates chemical migration, and has improved performance over commonly used model simplifications. When using measured diffusion coefficients the model accurately predicted (R 2  = 0.9, standard error (S e ) = 0.5) hundreds of empirical data points for various scenarios. Diffusion coefficient modelling, which determines the speed of chemical transfer from package to food, was a major contributor to uncertainty and dramatically decreased model performance (R 2  = 0.4, S e  = 1). In all, this study provides a rapid migration modelling approach to estimate exposure to chemicals in food packaging for emerging screening and prioritization approaches. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effect of PPG-PEG-PPG on the tocopherol-controlled release from films intended for food-packaging applications.

Science.gov (United States)

Castro López, María del Mar; Dopico García, Sonia; Ares Pernas, Ana; López Vilariño, José Manuel; González Rodríguez, María Victoria

2012-08-22

The feasibility of novel controlled release systems for the delivery of active substances from films intended for food packaging was investigated. Because polyolefins are used highly for food-packaging applications, the reported high retention degree of antioxidants has limited their use for active packaging. Thus, in this study, PP films modified with different chain extenders have been developed to favor and control the release rates of the low molecular weight antioxidant tocopherol. The use of different chain extenders as polymer modifiers (PE-PEG M(w), 575; and PPG-PEG-PPG M(w), 2000) has caused significant changes in tocopherol-specific release properties. High-performance liquid chromatography coupled to PDA-FL and PDA-MS was used to test tocopherol and chain extender migration, respectively. The release of tocopherol from the prepared films with two chain extenders into two food simulants was studied. Different temperatures and storage times were also tested. Varying the structural features of the films with the incorporation of different levels of PPG-PEG-PPG, the release of tocopherol (food-packaging additive) into different ethanolic simulants could be clearly controlled. The effect of the temperature and storage time on the release of the antioxidant has been outstanding as their values increased. The migration of the chain extender, also tested, was well below the limits set by European legislation.

Participants' comments on changes in the revised special supplemental nutrition program for women, infants, and children food packages: the Maryland food preference study.

Science.gov (United States)

Black, Maureen M; Hurley, Kristen M; Oberlander, Sarah E; Hager, Erin R; McGill, Adrienne E; White, Nneka T; Quigg, Anna M

2009-01-01

The Institute of Medicine recommended changes in the Special Supplemental Nutrition Program for Women, Infants, and Children (WIC) food packages to help families from diverse populations establish more healthful dietary patterns. A cross-sectional study conducted during summer 2007 included interviews and focus groups with 223 WIC participants throughout Maryland. The objectives were to examine participants' responses to food package changes, to identify racial/ethnic differences, and to assess costs. All participants (100%) consumed fruits and vegetables. They preferred fresh for taste, but many endorsed canned and frozen for convenience and cost. Most women (56%) and children (69%) consumed whole milk and did not want reduced-fat milk. Few participants (13%) consumed soy products and most were uninterested in future consumption. Participants endorsed whole-wheat bread as more healthful and reported that they (59%) and their children (51%) would increase consumption if provided by WIC. Non-Hispanic participants preferred peanut butter over beans, Hispanic participants reported that they (44%) and their children (57%) would consume more beans (substituting for peanut butter) if provided by WIC. There were few differences in preferences between African-American and white participants. Hispanics differed from non-Hispanics in preference for beans and dislike of frozen and canned vegetables, suggesting the importance of choices. The proposed food packages were cost-neutral, except when extensive substitutions with soy products were allowed. By providing fruits and vegetables, reduced-fat options, and increased opportunities for nutrition education, the revised food packages may reduce the risk of obesity among low-income women, infants, and children.

State of the Art of Antimicrobial Edible Coatings for Food Packaging Applications

Directory of Open Access Journals (Sweden)

Arantzazu Valdés

2017-04-01

Full Text Available The interest for the development of new active packaging materials has rapidly increased in the last few years. Antimicrobial active packaging is a potential alternative to protect perishable products during their preparation, storage and distribution to increase their shelf-life by reducing bacterial and fungal growth. This review underlines the most recent trends in the use of new edible coatings enriched with antimicrobial agents to reduce the growth of different microorganisms, such as Gram-negative and Gram-positive bacteria, molds and yeasts. The application of edible biopolymers directly extracted from biomass (proteins, lipids and polysaccharides or their combinations, by themselves or enriched with natural extracts, essential oils, bacteriocins, metals or enzyme systems, such as lactoperoxidase, have shown interesting properties to reduce the contamination and decomposition of perishable food products, mainly fish, meat, fruits and vegetables. These formulations can be also applied to food products to control gas exchange, moisture permeation and oxidation processes.

Ignorance is bliss. How parents of preschool children make sense of front-of-package visuals and claims on food.

Science.gov (United States)

Abrams, Katie M; Evans, Caitlin; Duff, Brittany R L

2015-04-01

With growing scrutiny over how the food industry advertises products aimed toward children and fewer consumers using nutrition facts panels and ingredient lists, the fronts of food packages have become an increasingly important marketing tool to understand. Front-of-package (FOP) visual and verbal claims play a critical role in capturing consumers' attention and helping them choose foods that fit their goals. Due to only possessing emergent literacy skills, preschool children are attuned to FOP visuals while parents are able to use the visuals in combination with verbal claims to make food choices for their children. The purpose of this focus group study was to explore how parents of preschool children make sense of FOP visual and verbal claims on packaged food products that are intended for their children. Thematic analysis revealed that parents associated aspects that most appeal to their preschool children - the characters and other playful visuals - with higher sugar content and artificial ingredients. However, parents were also easily led to believe the product was healthier based on visuals of fruit, more realistic pictures, health claims, cross-branding with healthier foods, and visuals suggesting the product is more natural. While parents recognized that the health claims and some visuals may not truly mean the food is healthier, they agreed that they rarely think beyond their initial impression. The food industry needs better regulatory guidance on how to communicate flavors and ingredients on package fronts in a way that helps consumers - particularly parents wanting to encourage healthy eating habits for their young children - better match their nutrition goals. Published by Elsevier Ltd.

Space shuttle/food system study. Package feasibility study, modifications 3S, 4C and 5S

Science.gov (United States)

1974-01-01

An optimum feeding system for the space shuttle was presented. This system consisted of all rehydratable type foods which were enclosed in a 4 in. x 4 in. x 1 in. flexible package. A feasibility follow-on study was conducted, and two acceptable, feasible prototypes for this package are described.

An analysis of sodium, total fat and saturated fat contents of packaged food products advertised in Bronx-based supermarket circulars.

Science.gov (United States)

Samuel, L; Basch, C H; Ethan, D; Hammond, R; Chiazzese, K

2014-08-01

Americans' consumption of sodium, fat, and saturated fat exceed federally recommended limits for these nutrients and has been identified as a preventable leading cause of hypertension and cardiovascular disease. More than 40% of the Bronx population comprises African-Americans, who have increased risk and earlier onset of hypertension and are also genetically predisposed to salt-sensitive hypertension. This study analyzed nutrition information for packaged foods advertised in Bronx-based supermarket circulars. Federally recommended limits for sodium, saturated fat and total fat contents were used to identify foods that were high in these nutrients. The proportion of these products with respect to the total number of packaged foods was calculated. More than a third (35%) and almost a quarter (24%) of the 898 advertised packaged foods were high in saturated fat and sodium respectively. Such foods predominantly included processed meat and fish products, fast foods, meals, entrees and side dishes. Dairy and egg products were the greatest contributors of high saturated fat. Pork and beef products, fast foods, meals, entrees and side dishes had the highest median values for sodium, total fat and saturated fat content. The high proportion of packaged foods that are high in sodium and/or saturated fat promoted through supermarket circulars highlights the need for nutrition education among consumers as well as collaborative public health measures by the food industry, community and government agencies to reduce the amounts of sodium and saturated fat in these products and limit the promotion of foods that are high in these nutrients.

Prevalence of Nutrition and Health-Related Claims on Pre-Packaged Foods: A Five-Country Study in Europe

Science.gov (United States)

Hieke, Sophie; Kuljanic, Nera; Pravst, Igor; Miklavec, Krista; Kaur, Asha; Brown, Kerry A.; Egan, Bernadette M.; Pfeifer, Katja; Gracia, Azucena; Rayner, Mike

2016-01-01

This study is part of the research undertaken in the EU funded project CLYMBOL (“Role of health-related CLaims and sYMBOLs in consumer behaviour”). The first phase of this project consisted of mapping the prevalence of symbolic and non-symbolic nutrition and health-related claims (NHC) on foods and non-alcoholic beverages in five European countries. Pre-packaged foods and drinks were sampled based on a standardized sampling protocol, using store lists or a store floor plan. Data collection took place across five countries, in three types of stores. A total of 2034 foods and drinks were sampled and packaging information was analyzed. At least one claim was identified for 26% (95% CI (24.0%–27.9%)) of all foods and drinks sampled. Six percent of these claims were symbolic. The majority of the claims were nutrition claims (64%), followed by health claims (29%) and health-related ingredient claims (6%). The most common health claims were nutrient and other function claims (47% of all claims), followed by disease risk reduction claims (5%). Eight percent of the health claims were children’s development and health claims but these were only observed on less than 1% (0.4%–1.1%) of the foods. The category of foods for specific dietary use had the highest proportion of NHC (70% of foods carried a claim). The prevalence of symbolic and non-symbolic NHC varies across European countries and between different food categories. This study provides baseline data for policy makers and the food industry to monitor and evaluate the use of claims on food packaging. PMID:26950149

Prevalence of Nutrition and Health-Related Claims on Pre-Packaged Foods: A Five-Country Study in Europe

Directory of Open Access Journals (Sweden)

Sophie Hieke

2016-03-01

Full Text Available This study is part of the research undertaken in the EU funded project CLYMBOL (“Role of health-related CLaims and sYMBOLs in consumer behaviour”. The first phase of this project consisted of mapping the prevalence of symbolic and non-symbolic nutrition and health-related claims (NHC on foods and non-alcoholic beverages in five European countries. Pre-packaged foods and drinks were sampled based on a standardized sampling protocol, using store lists or a store floor plan. Data collection took place across five countries, in three types of stores. A total of 2034 foods and drinks were sampled and packaging information was analyzed. At least one claim was identified for 26% (95% CI (24.0%–27.9% of all foods and drinks sampled. Six percent of these claims were symbolic. The majority of the claims were nutrition claims (64%, followed by health claims (29% and health-related ingredient claims (6%. The most common health claims were nutrient and other function claims (47% of all claims, followed by disease risk reduction claims (5%. Eight percent of the health claims were children’s development and health claims but these were only observed on less than 1% (0.4%–1.1% of the foods. The category of foods for specific dietary use had the highest proportion of NHC (70% of foods carried a claim. The prevalence of symbolic and non-symbolic NHC varies across European countries and between different food categories. This study provides baseline data for policy makers and the food industry to monitor and evaluate the use of claims on food packaging.

Polylactic acid/zinc oxide biocomposite films for food packaging application.

Science.gov (United States)

Marra, Antonella; Silvestre, Clara; Duraccio, Donatella; Cimmino, Sossio

2016-07-01

Although PLA is much more expensive than polyolefins, such as PP and PE, there is a great interest to propose PLA based material as alternative films for food packaging being PLA derivable from natural source, compostable and biodegradable. For this purpose the research has the task to investigate and propose PLA materials with enhanced properties to be effectively and efficiently alternative to polyolefin films for food packaging application. In this contribution, biocomposite films of PLA with 1, 3 and 5wt% of ZnO have been investigated to determine mechanical, barrier and antimicrobial (against Escherichia coli) properties. It is found that the biocomposite films are characterized by a good dispersion of the ZnO particles in PLA matrix, although no previous treatment was performed on ZnO particles, such as silanization, to decrease its incompatibility with the polymer. The biocomposite films have shown good mechanical properties, decrease of permeability to CO2 and O2, and only a slight increase to water vapour. Particularly important is that, for the biocomposite with 5wt% of ZnO, the % Reduction for E. Coli test reached the value of 99.99 already after 24h. Copyright © 2016 Elsevier B.V. All rights reserved.

The healthfulness of food and beverage purchases after the federal food package revisions: The case of two New England states.

Science.gov (United States)

Andreyeva, Tatiana; Tripp, Amanda S

2016-10-01

In 2009, the Special Supplemental Nutrition Program for Women, Infants, and Children (WIC) implemented new food packages to improve dietary intake among WIC participants. This paper examines how the healthfulness of food purchases among low-income households changed following this reform. Point-of-sale data for 2137 WIC-participating and 1303 comparison households were obtained from a regional supermarket chain. The healthfulness of purchased foods and beverages was determined per their saturated fat, sugar, and sodium content. A pre-post assessment (2009-2010) of the product basket healthfulness was completed using generalized estimating equation models. Data were analyzed in 2015. At baseline, healthy products accounted for most of the food volume purchased by WIC participants, but beverages were dominated by moderation (less healthy) items. With new subsidies for fruit, vegetables and whole grains, the WIC revisions increased the volume of healthy food purchases of WIC-participating households by 3.9% and reduced moderation foods by 1.8%. The biggest improvements were reductions in moderation beverages (down by 24.7% in volume), driven by milk fat restrictions in the WIC food package revisions. The healthfulness of the product basket increased post-WIC revisions; mainly due to a reduction in the volume of moderation food and beverages purchased (down by 15.5%) rather than growth in healthy products (up by 1.9%). No similar improvements were seen in a comparison group of low-income nonparticipants. After the WIC revisions, the healthfulness of participant purchases improved, particularly for beverages. Efforts to encourage healthy eating by people receiving federal food assistance are paying off. Copyright © 2016 Elsevier Inc. All rights reserved.

Properties of Whey-Protein-Coated Films and Laminates as Novel Recyclable Food Packaging Materials with Excellent Barrier Properties

Directory of Open Access Journals (Sweden)

Markus Schmid

2012-01-01

Full Text Available In case of food packaging applications, high oxygen and water vapour barriers are the prerequisite conditions for preserving the quality of the products throughout their whole lifecycle. Currently available polymers and/or biopolymer films are mostly used in combination with barrier materials derived from oil based plastics or aluminium to enhance their low barrier properties. In order to replace these non-renewable materials, current research efforts are focused on the development of sustainable coatings, while maintaining the functional properties of the resulting packaging materials. This article provides an introduction to food packaging requirements, highlights prior art on the use of whey-based coatings for their barriers properties, and describes the key properties of an innovative packaging multilayer material that includes a whey-based layer. The developed whey protein formulations had excellent barrier properties almost comparable to the ethylene vinyl alcohol copolymers (EVOH barrier layer conventionally used in food packaging composites, with an oxygen barrier (OTR of <2 [cm³(STP/(m²d bar] when normalized to a thickness of 100 μm. Further requirements of the barrier layer are good adhesion to the substrate and sufficient flexibility to withstand mechanical load while preventing delamination and/or brittle fracture. Whey-protein-based coatings have successfully met these functional and mechanical requirements.

Quality and safety aspects of reusable plastic food packaging materials : a European study to underpin future legislation

NARCIS (Netherlands)

Jetten, J.; Kruijf, N. de; Castle, L.

1999-01-01

The objective of this study was to develop a comprehensive package of quality assurance criteria for use by industry and regulatory authorities for ensuring the quality and safety-in-use (sensory, microbiological and chemical) of reused plastics for food packaging. The study included thermal

High-throughput migration modelling for estimating exposure to chemicals in food packaging in screening and prioritization tools

DEFF Research Database (Denmark)

Ernstoff, Alexi S; Fantke, Peter; Huang, Lei

2017-01-01

Specialty software and simplified models are often used to estimate migration of potentially toxic chemicals from packaging into food. Current models, however, are not suitable for emerging applications in decision-support tools, e.g. in Life Cycle Assessment and risk-based screening and prioriti...... to uncertainty and dramatically decreased model performance (R2 = 0.4, Se = 1). In all, this study provides a rapid migration modelling approach to estimate exposure to chemicals in food packaging for emerging screening and prioritization approaches....

Antimicrobial packaging with natural compunds - a review

Directory of Open Access Journals (Sweden)

Renata Dobrucka

2016-12-01

Full Text Available Background:  Packaging problems are an integral part of logistics and the implementation of packaging significantly affects the effectiveness of logistics processes, as a factor which increases the safety and the quality of products being transported. Active packaging is an area of technology needed to meet the requirements of the contemporary consumer. Active packaging creates additional opportunities in systems for packing goods, as well as offering a solution in which the packaging, the product and surroundings interact. Furthermore, active packaging allows packaging to interact with food and the environment and play a dynamic role in food preservation. The main role of antimicrobial packaging is to inhibit the growth of microorganisms that reduce the quality of the packaged product. Methods: The application of natural antimicrobial agents appears to be safe for food products. Also, these compounds have potential applications as a natural preservative in the food packaging industry. This study presents some antibacterial agents, namely chitosan, nisin and pectins. Results and conclusion: Natural substances used in active packaging can eliminate the danger of chemical substances migrating to food.

Added sugar in the packaged foods and beverages available at a major Canadian retailer in 2015: a descriptive analysis.

Science.gov (United States)

Acton, Rachel B; Vanderlee, Lana; Hobin, Erin P; Hammond, David

2017-01-01

Excess consumption of added sugars has been associated with a variety of health problems, but there is little information available characterizing added sugar in the Canadian food supply. This study examined the presence and types of added sugars in the packaged food and beverage products available at a major Canadian grocery retailer. We searched the ingredients lists of over 40 000 packaged food products available for sale in March 2015 for a variety of added sugar terms. Proportions of food products containing added sugar were identified overall and within food product categories. Differences in total sugar content were identified between food products with and without added sugar. Overall, 66% of the packaged food products analyzed contained at least 1 added sugar. The added sugar term "sugar" (and its variations) appeared the most frequently, followed by "dextrose." Added sugar presence and total sugar content varied within many product categories but were consistently higher in expected categories such as "beverages." Mean total sugar content was significantly higher in products with added sugar than in those without, both overall ( p added sugar, similar to recent patterns estimated for the US food supply. The results provide an estimation of the baseline characterization of added sugar in the Canadian food supply, which can be used to assess outcomes of future changes to sugar labelling policies in Canada.

Predictive modelling of migration from packaging materials into food products for regulatory purposes

NARCIS (Netherlands)

Helmroth, E.; Rijk, R.; Dekker, M.; Jongen, W.

2002-01-01

Migration of low-molecular weight compounds is one of the most important problems of packaging plastics and other plastics intended to come into contact with food products. Since migration experiments are time consuming and expensive, predictive modelling has been introduced as a promising

Color-Coded Front-of-Pack Nutrition Labels—An Option for US Packaged Foods?

Science.gov (United States)

Dunford, Elizabeth K.; Poti, Jennifer M.; Xavier, Dagan; Webster, Jacqui L.; Taillie, Lindsey Smith

2017-01-01

The implementation of a standardized front-of-pack-labelling (FoPL) scheme would likely be a useful tool for many consumers trying to improve the healthfulness of their diets. Our objective was to examine what the traffic light labelling scheme would look like if implemented in the US. Data were extracted from Label Insight’s Open Access branded food database in 2017. Nutrient levels and the proportion of products classified as “Red” (High), “Amber” (Medium) or “Green” (Low) in total fat, saturated fat, total sugar and sodium for food and beverage items were examined. The proportion of products in each category that had each possible combination of traffic light colors, and met the aggregate score for “healthy” was examined. Out of 175,198 products, >50% of all US packaged foods received a “Red” rating for total sugar and sodium. “Confectionery” had the highest mean total sugar (51.9 g/100 g) and “Meat and meat alternatives” the highest mean sodium (781 mg/100 g). The most common traffic light label combination was “Red” for total fat, saturated fat and sodium and “Green” for sugar. Only 30.1% of products were considered “healthy”. A wide variety (n = 80) of traffic light color combinations were observed. A color coded traffic light scheme appears to be an option for implementation across the US packaged food supply to support consumers in making healthier food choices. PMID:28489037

Fruit and vegetable availability and selection: federal food package revisions, 2009.

Science.gov (United States)

Zenk, Shannon N; Odoms-Young, Angela; Powell, Lisa M; Campbell, Richard T; Block, Daniel; Chavez, Noel; Krauss, Ramona C; Strode, Steven; Armbruster, James

2012-10-01

With nearly 49,000 authorized retailers nationwide, a policy change that added fruits and vegetables (FV) to the U.S. Department of Agriculture's Special Supplemental Nutrition Program for Women, Infants, and Children (WIC) food packages in 2009 had the potential to expand neighborhood FV availability. This study examined changes in availability and selection of commonly consumed and culturally specific FV at authorized retailers (WIC vendors) before and after implementation of the revised WIC food packages. Quasi-experimental, one-group design with two pre-policy observations and one post-policy observation. Trained observers assessed a list of fresh, frozen, and canned FV at each vendor in seven northern Illinois counties. Eight indices of FV availability and selection were derived. Multiple regression estimated relationships. Data were collected in 2008-2010 and analyzed in 2011. Overall, availability and selection of commonly consumed fresh FV and availability of African-American culturally specific fresh FV improved after implementation of the new policy. Modest improvements in the overall availability of canned low-sodium vegetables and frozen FV were observed. Changes differed by vendor type (large vendor, small vendor, and pharmacy). Changes in availability or selection did not differ by neighborhood characteristics (population density, median household income, racial/ethnic composition). Expansion of WIC foods was associated with small positive externalities on the food environment. Larger subsidies to create more demand and more-substantial stocking requirements for retailers may yield significantly larger improvements and thus warrant further investigation. Approaches targeting rural, low-income, and racial/ethnic minority neighborhoods also may be needed. Copyright © 2012 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

ε-Caprolactam migration from irradiated PA-6 food packaging: kinetic simulation and measurement

International Nuclear Information System (INIS)

Rosa, Faena Machado Leite; Felix, Juliana; Araujo, Henrique Peres; Monteiro, Magali

2007-01-01

Migration of low molecular mass compounds (LMMC), such as monomers and additives, from plastic packaging into food simulants is a very important issue, concerning public health and chemical contamination of foods. Sterilization of food packaging materials with ionizing radiation is considered an alternative to other sterilization methods, but when polymers are irradiated, LMMC may be formed, as radiolysis products. According to the Brazilian legislation, specific migration tests, such as those of LMMC from packaging into simulants, should be carried out at certain temperature and time, depending on the real conditions of contact. In this work, multilayer flexible films with polyamide 6 (PA-6), used for meat foodstuffs, were studied. The ε-caprolactam (PA-6 monomer) specific migration into acetic acid 3% simulant at 40 deg C during 10 days and at 100 deg C during 30 minutes was performed. The initial monomer level in the irradiated and non irradiated PA-6 films was quantified by high resolution gas chromatography (HRGC). Radiation doses were 3 and 7 kGy. ε-caprolactam specific migration was carried out only with non irradiated films. The results showed that radiation causes a significant change in the monomer level, up or down, depending on the multilayer film type. The kinetic of the ε-caprolactam migration at both temperatures, 40 and 100 deg C was clearly explained by the numerical simulation, combining an Arrhenius equation with the Fick's second law, although this kinetic was not experimentally studied. This simulation allowed to predict diffusion parameters estimates, like diffusion coefficients and activation energies of ε-caprolactam in the films or simulant. (author)

A radiotracer technique for the migration of inorganic contaminants into dry food from packaging made from recycled paper and board

International Nuclear Information System (INIS)

Aston, D.S.J.; Parry, S.J.

2005-01-01

A radiotracer method, initially developed to analyze migration from retail plastic food packaging into food simulants, has been developed to assess the measurement of inorganic contaminants migrating from recycled paper and board into real food. This new radiotracer method has been applied to the study of 10 food samples and their corresponding recycled paper and board packaging. Samples of paper and board were irradiated in a thermal neutron flux of 1.26 x 10 16 n x m -2 x s -1 for 15 hours to activate elements of interest. After a decay period of 10 days the paper and board was placed in contact with the corresponding foodstuff. The food was analyzed for any radioactivity migrating from the packaging by gamma-ray spectrometry. Samples were analyzed regularly during the 90 days contact time. Detection limits for the determination of migration was as low as a few μg/kg in the food. Results from the migration study have shown that, of the 60 elements measured, only Zn and Fe were detected in food, at concentrations of 0.012-0.25, and 0.045-0.11 mg/kg, respectively. This was despite the recycled paper and board samples being highly elevated in many other elements such as Cr (0.9-15.1 mg/kg) and Ba (3.3-75.4 mg/kg). The level of migration of Zn and Fe into food from packaging was insignificant compared to the UK recommended daily allowances of 15 mg, and, therefore, represented no hazard to human health. (author)

Antioxidant films based on cross-linked methyl cellulose and native Chilean berry for food packaging applications.

Science.gov (United States)

López de Dicastillo, Carol; Rodríguez, Francisco; Guarda, Abel; Galotto, Maria José

2016-01-20

Development of antioxidant and antimicrobial active food packaging materials based on biodegradable polymer and natural plant extracts has numerous advantages as reduction of synthetic additives into the food, reduction of plastic waste, and food protection against microorganisms and oxidation reactions. In this way, active films based on methylcellulose (MC) and maqui (Aristotelia chilensis) berry fruit extract, as a source of antioxidants agents, were studied. On the other hand, due to the high water affinity of MC, this polymer was firstly cross-linked with glutaraldehyde (GA) at different concentrations. The results showed that the addition of GA decreased water solubility, swelling, water vapor permeability of MC films, and the release of antioxidant substances from the active materials increased with the concentration of GA. Natural extract and active cross-linked films were characterized in order to obtain the optimal formulation with the highest antioxidant activity and the best physical properties for latter active food packaging application. Copyright © 2015 Elsevier Ltd. All rights reserved.

Nutrient profile of 23 596 packaged supermarket foods and non-alcoholic beverages in Australia and New Zealand.

Science.gov (United States)

Ni Mhurchu, Cliona; Brown, Ryan; Jiang, Yannan; Eyles, Helen; Dunford, Elizabeth; Neal, Bruce

2016-02-01

To compare the nutrient profile of packaged supermarket food products available in Australia and New Zealand. Eligibility to carry health claims and relationship between nutrient profile score and nutritional content were also evaluated. Nutritional composition data were collected in six major Australian and New Zealand supermarkets in 2012. Mean Food Standards Australia New Zealand Nutrient Profiling Scoring Criterion (NPSC) scores were calculated and the proportion of products eligible to display health claims was estimated. Regression analyses quantified associations between NPSC scores and energy density, saturated fat, sugar and sodium contents. NPSC scores were derived for 23,596 packaged food products (mean score 7.0, range -17 to 53). Scores were lower (better nutrient profile) for foods in Australia compared with New Zealand (mean 6.6 v. 7.8). Overall, 45% of foods were eligible to carry health claims based on NPSC thresholds: 47% in Australia and 41% in New Zealand. However, less than one-third of dairy (32%), meat and meat products (28%) and bread and bakery products (27.5%) were eligible to carry health claims. Conversely, >75% of convenience food products were eligible to carry health claims (82.5%). Each two-unit higher NPSC score was associated with higher energy density (78 kJ/100 g), saturated fat (0.95 g/100 g), total sugar (1.5 g/100 g) and sodium (66 mg/100 g; all P values<0.001). Fewer than half of all packaged foods available in Australia and New Zealand in 2012 met nutritional criteria to carry health claims. The few healthy choices available in key staple food categories is a concern. Improvements in nutritional quality of foods through product reformulation have significant potential to improve population diets.

Advancements in meat packaging.

Science.gov (United States)

McMillin, Kenneth W

2017-10-01

Packaging of meat provides the same or similar benefits for raw chilled and processed meats as other types of food packaging. Although air-permeable packaging is most prevalent for raw chilled red meat, vacuum and modified atmosphere packaging offer longer shelf life. The major advancements in meat packaging have been in the widely used plastic polymers while biobased materials and their integration into composite packaging are receiving much attention for functionality and sustainability. At this time, active and intelligent packaging are not widely used for antioxidant, antimicrobial, and other functions to stabilize and enhance meat properties although many options are being developed and investigated. The advances being made in nanotechnology will be incorporated into food packaging and presumably into meat packaging when appropriate and useful. Intelligent packaging using sensors for transmission of desired information and prompting of subsequent changes in packaging materials, environments or the products to maintain safety and quality are still in developmental stages. Copyright © 2017 Elsevier Ltd. All rights reserved.

Mechanistic model coupling gas exchange dynamics and Listeria monocytogenes growth in modified atmosphere packaging of non respiring food.

Science.gov (United States)

Chaix, E; Broyart, B; Couvert, O; Guillaume, C; Gontard, N; Guillard, V

2015-10-01

A mechanistic model coupling O2 and CO2 mass transfer (namely diffusion and solubilisation in the food itself and permeation through the packaging material) to microbial growth models was developed aiming at predicting the shelf life of modified atmosphere packaging (MAP) systems. It was experimentally validated on a non-respiring food by investigating concomitantly the O2/CO2 partial pressure in packaging headspace and the growth of Listeria monocytogenes (average microbial count) within the food sample. A sensitivity analysis has revealed that the reliability of the prediction by this "super-parametrized" model (no less than 47 parameters were required for running one simulation) was strongly dependent on the accuracy of the microbial input parameters. Once validated, this model was used to decipher the role of O2/CO2 mass transfer on microbial growth and as a MAP design tool: an example of MAP dimensioning was provided in this paper as a proof of concept. Copyright © 2015 Elsevier Ltd. All rights reserved.

21 CFR 820.130 - Device packaging.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Device packaging. 820.130 Section 820.130 Food and... QUALITY SYSTEM REGULATION Labeling and Packaging Control § 820.130 Device packaging. Each manufacturer shall ensure that device packaging and shipping containers are designed and constructed to protect the...

Preparation and application of agar/alginate/collagen ternary blend functional food packaging films.

Science.gov (United States)

Wang, Long-Feng; Rhim, Jong-Whan

2015-09-01

Ternary blend agar/alginate/collagen (A/A/C) hydrogel films with silver nanoparticles (AgNPs) and grapefruit seed extract (GSE) were prepared. Their performance properties, transparency, tensile strength (TS), water vapor permeability (WVP), water contact angle (CA), water swelling ratio (SR), water solubility (WS), and antimicrobial activity were determined. The A/A/C film was highly transparent, and both AgNPs and GSE incorporated blend films (A/A/C(AgNPs) and A/A/C(GSE)) exhibited UV-screening effect, especially, the A/A/C(GSE) film had high UV-screening effect without sacrificing the transmittance. In addition, the A/A/C blend films formed efficient hydrogel film with the water holding capacity of 23.6 times of their weight. Both A/A/C(AgNPs) and A/A/C(GSE) composite films exhibited strong antimicrobial activity against both Gram-positive (Listeria monocytogenes) and Gram-negative (Escherichia coli) food-borne pathogenic bacteria. The test results of fresh potatoes packaging revealed that all the A/A/C ternary blend films prevented forming of condensed water on the packaged film surface, both A/A/C(AgNPs) and A/A/C(GSE) composite films prevented greening of potatoes during storage. The results indicate that the ternary blend hydrogel films incorporated with AgNPs or GSE can be used not only as antifogging packaging films for highly respiring fresh agriculture produce, but also as an active food packaging system utilizing their strong antimicrobial activity. Copyright © 2015 Elsevier B.V. All rights reserved.

Can counter-advertising reduce pre-adolescent children's susceptibility to front-of-package promotions on unhealthy foods? Experimental research.

Science.gov (United States)

Dixon, Helen; Scully, Maree; Kelly, Bridget; Chapman, Kathy; Wakefield, Melanie

2014-09-01

This study aimed to test whether counter-advertisements (i.e. messages contesting industry marketing) make pre-adolescent children less susceptible to the influence of food promotions. Since children have lower media literacy levels due to their immature cognitive abilities, specific research questions explored were: (1) whether the effectiveness of counter-ads is contingent on children having understood them; and (2) whether counter-ads may be detrimental when they are misinterpreted. A between-subjects experimental design using a web-based methodology was employed. 1351 grade 5-6 students (mean age 11 years) from schools located in metropolitan Melbourne, Australia participated. Participants were randomly shown an animated web banner advertisement (counter-ad challenging front-of-package promotion or control ad) and a pair of food packages from the same product category comprising an unhealthy product featuring a front-of-package promotion (nutrient content claim or sports celebrity endorsement) and a healthier control pack without a front-of-package promotion. Responses to the assigned advertisement, choice of product (healthy versus unhealthy) and ratings of the unhealthy product and front-of-package promotion on various nutritional and image-related attributes were recorded for each child. Sixty-six percent of children who viewed a counter-ad understood its main message. These children rated the front-of-package promotion as less believable and rated the unhealthy product bearing the front-of-package promotion as less healthy compared to the control group. However, children who misunderstood the counter-ad rated the unhealthy product bearing a front-of-package promotion as more healthy and rated the front-of-package promotion more favourably than those who correctly understood the counter-ad. Counter-advertising may have unintended consequences when misunderstood. If public health organizations or government pursue counter-advertising as a strategy to reduce

Fruit-related terms and images on food packages and advertisements affect children's perceptions of foods' fruit content.

Science.gov (United States)

Heller, Rebecca; Martin-Biggers, Jennifer; Berhaupt-Glickstein, Amanda; Quick, Virginia; Byrd-Bredbenner, Carol

2015-10-01

To determine whether food label information and advertisements for foods containing no fruit cause children to have a false impression of the foods' fruit content. In the food label condition, a trained researcher showed each child sixteen different food label photographs depicting front-of-food label packages that varied with regard to fruit content (i.e. real fruit v. sham fruit) and label elements. In the food advertisement condition, children viewed sixteen, 30 s television food advertisements with similar fruit content and label elements as in the food label condition. After viewing each food label and advertisement, children responded to the question 'Did they use fruit to make this?' with responses of yes, no or don't know. Schools, day-care centres, after-school programmes and other community groups. Children aged 4-7 years. In the food label condition, χ 2 analysis of within fruit content variation differences indicated children (n 58; mean age 4·2 years) were significantly more accurate in identifying real fruit foods as the label's informational load increased and were least accurate when neither a fruit name nor an image was on the label. Children (n 49; mean age 5·4 years) in the food advertisement condition were more likely to identify real fruit foods when advertisements had fruit images compared with when no image was included, while fruit images in advertisements for sham fruit foods significantly reduced accuracy of responses. Findings suggest that labels and advertisements for sham fruit foods mislead children with regard to the food's real fruit content.

Analysis of residual toluene in food packaging via headspace extraction method using gas chromatography

International Nuclear Information System (INIS)

Lim, Ying Chin; Mohd Marsin Sanagi

2008-01-01

Polymeric materials are used in many food contact applications as packaging material. The presence of residual toluene in this food packaging material can migrate into food and thus affect the quality of food. In this study, a manual headspace analysis was successfully designed and developed. The determination of residual toluene was carried out with standard addition method and multiple headspace extraction, MHE) method using gas chromatography-flame ionization detector, GC-FID). Identification of toluene was performed by comparison of its retention time with standard toluene and GC-MS. It was found that the suitable heating temperature was 180 degree Celsius with an optimum heating time of 10 minutes. The study also found that the concentration of residual toluene in multicolored sample was higher compared to mono colored sample whereas residual toluene in sample analyzed using standard addition method was higher compared to MHE method. However, comparison with the results obtained from De Paris laboratory, France found that MHE method gave higher accuracy for sample with low analyte concentration. On the other hand, lower accuracy was obtained for sample with high concentration of residual toluene due to systematic errors. Comparison between determination methods showed that MHE method is more precise compared to standard addition method. (author)

Choosing front-of-package food labelling nutritional criteria: how smart were 'Smart Choices'?

Science.gov (United States)

Roberto, Christina A; Bragg, Marie A; Livingston, Kara A; Harris, Jennifer L; Thompson, Jackie M; Seamans, Marissa J; Brownell, Kelly D

2012-02-01

The 'Smart Choices' programme was an industry-driven, front-of-package (FOP) nutritional labelling system introduced in the USA in August 2009, ostensibly to help consumers select healthier options during food shopping. Its nutritional criteria were developed by members of the food industry in collaboration with nutrition and public health experts and government officials. The aim of the present study was to test the extent to which products labelled as 'Smart Choices' could be classified as healthy choices on the basis of the Nutrient Profile Model (NPM), a non-industry-developed, validated nutritional standard. A total of 100 packaged products that qualified for a 'Smart Choices' designation were sampled from eight food and beverage categories. All products were evaluated using the NPM method. In all, 64 % of the products deemed 'Smart Choices' did not meet the NPM standard for a healthy product. Within each 'Smart Choices' category, 0 % of condiments, 8·70 % of fats and oils, 15·63 % of cereals and 31·58 % of snacks and sweets met NPM thresholds. All sampled soups, beverages, desserts and grains deemed 'Smart Choices' were considered healthy according to the NPM standard. The 'Smart Choices' programme is an example of industries' attempts at self-regulation. More than 60 % of foods that received the 'Smart Choices' label did not meet standard nutritional criteria for a 'healthy' food choice, suggesting that industries' involvement in designing labelling systems should be scrutinized. The NPM system may be a good option as the basis for establishing FOP labelling criteria, although more comparisons with other systems are needed.

{epsilon}-Caprolactam migration from irradiated PA-6 food packaging: kinetic simulation and measurement

Energy Technology Data Exchange (ETDEWEB)

Rosa, Faena Machado Leite [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Felix, Juliana; Araujo, Henrique Peres; Monteiro, Magali [UNESP, Araraquara, SP (Brazil). Faculdade de Ciencias Farmaceuticas. Dept. de Alimentos e Nutricao; Padula, Marisa [Instituto de Tecnologia de Alimentos (ITAL), Campinas, SP (Brazil). Centro de Tecnologia de Embalagem; Manzoli, Jose Eduardo [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Universidade Sao Judas Tadeu (USJT), Sao Paulo, SP (Brazil)], E-mail: jmanzoli@ipen.br

2007-07-01

Migration of low molecular mass compounds (LMMC), such as monomers and additives, from plastic packaging into food simulants is a very important issue, concerning public health and chemical contamination of foods. Sterilization of food packaging materials with ionizing radiation is considered an alternative to other sterilization methods, but when polymers are irradiated, LMMC may be formed, as radiolysis products. According to the Brazilian legislation, specific migration tests, such as those of LMMC from packaging into simulants, should be carried out at certain temperature and time, depending on the real conditions of contact. In this work, multilayer flexible films with polyamide 6 (PA-6), used for meat foodstuffs, were studied. The {epsilon}-caprolactam (PA-6 monomer) specific migration into acetic acid 3% simulant at 40 deg C during 10 days and at 100 deg C during 30 minutes was performed. The initial monomer level in the irradiated and non irradiated PA-6 films was quantified by high resolution gas chromatography (HRGC). Radiation doses were 3 and 7 kGy. {epsilon}-caprolactam specific migration was carried out only with non irradiated films. The results showed that radiation causes a significant change in the monomer level, up or down, depending on the multilayer film type. The kinetic of the {epsilon}-caprolactam migration at both temperatures, 40 and 100 deg C was clearly explained by the numerical simulation, combining an Arrhenius equation with the Fick's second law, although this kinetic was not experimentally studied. This simulation allowed to predict diffusion parameters estimates, like diffusion coefficients and activation energies of {epsilon}-caprolactam in the films or simulant. (author)

Active Infrared Thermography for Seal Contamination Detection in Heat-Sealed Food Packaging

Directory of Open Access Journals (Sweden)

Karlien D’huys

2016-11-01

Full Text Available Packaging protects food products from environmental influences, assuring quality and safety throughout shelf life if properly performed. Packaging quality depends on the quality of the packaging material and of the closure or seal. A common problem possibly jeopardizing seal quality is the presence of seal contamination, which can cause a decreased seal strength, an increased packaging failure risk and leak formation. Therefore, early detection and removal of seal contaminated packages from the production chain is crucial. In this work, a pulsed-type active thermography method using the heated seal bars as an excitation source was studied for detecting seal contamination. Thermal image sequences of contaminated seals were recorded shortly after sealing. The detection performances of six thermal image processing methods, based on a single frame, a fit of the cooling profiles, thermal signal reconstruction, pulsed phase thermography, principal component thermography and a matched filter, were compared. High resolution digital images served as a reference to quantify seal contamination, and processed thermal images were mapped to these references. The lowest detection limit (equivalent diameter 0.60 mm was obtained for the method based on a fit of the cooling profiles. Moreover, the detection performance of this method did not depend strongly on the time after sealing at which recording of the thermal images was started, making it a robust and generally applicable method.

Touch-flavor transference: Assessing the effect of packaging weight on gustatory evaluations, desire for food and beverages, and willingness to pay.

Science.gov (United States)

Kampfer, Kristina; Leischnig, Alexander; Ivens, Björn Sven; Spence, Charles

2017-01-01

Product packaging serves a number of distinct functions and influences the way in which consumers respond to various product offerings. The research reported here examines whether the haptic characteristics of a non-diagnostic product packaging cue, namely its weight, affects the response of consumers. This article reviews existing research on haptic transference and proposes a conceptual framework to explore how the weight of product packaging affects the flavor of the food or beverages, and, in turn, consumers' desire for consumption and willingness to pay. Two studies demonstrate that an increase in packaging weight affects both desire and willingness to pay for the product. These effects are serially mediated by perceived flavor intensity and overall flavor evaluation. Based on these insights, implications for the design of food and beverages packaging are discussed.

Touch-flavor transference: Assessing the effect of packaging weight on gustatory evaluations, desire for food and beverages, and willingness to pay

Science.gov (United States)

Kampfer, Kristina; Leischnig, Alexander; Spence, Charles

2017-01-01

Product packaging serves a number of distinct functions and influences the way in which consumers respond to various product offerings. The research reported here examines whether the haptic characteristics of a non-diagnostic product packaging cue, namely its weight, affects the response of consumers. This article reviews existing research on haptic transference and proposes a conceptual framework to explore how the weight of product packaging affects the flavor of the food or beverages, and, in turn, consumers’ desire for consumption and willingness to pay. Two studies demonstrate that an increase in packaging weight affects both desire and willingness to pay for the product. These effects are serially mediated by perceived flavor intensity and overall flavor evaluation. Based on these insights, implications for the design of food and beverages packaging are discussed. PMID:29020078

Touch-flavor transference: Assessing the effect of packaging weight on gustatory evaluations, desire for food and beverages, and willingness to pay.

Directory of Open Access Journals (Sweden)

Kristina Kampfer

Full Text Available Product packaging serves a number of distinct functions and influences the way in which consumers respond to various product offerings. The research reported here examines whether the haptic characteristics of a non-diagnostic product packaging cue, namely its weight, affects the response of consumers. This article reviews existing research on haptic transference and proposes a conceptual framework to explore how the weight of product packaging affects the flavor of the food or beverages, and, in turn, consumers' desire for consumption and willingness to pay. Two studies demonstrate that an increase in packaging weight affects both desire and willingness to pay for the product. These effects are serially mediated by perceived flavor intensity and overall flavor evaluation. Based on these insights, implications for the design of food and beverages packaging are discussed.

Easy to open? Exploring the 'openability' of hospital food and beverage packaging by older adults.

Science.gov (United States)

Bell, Alison F; Walton, Karen L; Tapsell, Linda C

2016-03-01

Food is increasingly a packaged commodity, both in the community and in institutionalised settings such as hospitals, where many older people are malnourished. Previous research with patients aged over 65 years in NSW public hospitals identified difficulties opening milk, water, juices, cereal and tetra packs. The aim of this paper was to assess the ability of well older people living in the community to open food and beverage items routinely used in NSW hospitals in order to gain further insights into the older person/pack interaction and the role of hand and finger strength in pack opening. A sample of 40 older people in good health aged over 65 years from 3 community settings participated in the study. The attempts at pack opening were observed, the time taken to open the pack was measured and the correlation between grip and pinch strengths with opening times was determined. Tetra packs, water bottles, cereal, fruit cups, desserts, biscuits and cheese portions appeared to be the most difficult food products to open. Ten percent of the sample could not open the water bottles and 39% could not open cheese portions. The results were consistent with the previous research involving hospitalised older adults, adding emphasis to the conclusion that food and beverage packaging can be a potential barrier to adequate nutrition when particular types of packaged products are used in hospitals or the community. The ageing population is rapidly becoming a larger and more important group to consider in the provision of goods and services. Designers, manufacturers and providers of food and beverage products need to consider the needs and abilities of these older consumers to ensure good 'openability' and promote adequate nutritional intakes. Copyright © 2015 Elsevier Ltd. All rights reserved.

[Food Security in Europe: comparison between the "Hygiene Package" and the British Retail Consortium (BRC) & International Food Standard (IFS) protocols].

Science.gov (United States)

Stilo, A; Parisi, S; Delia, S; Anastasi, F; Bruno, G; Laganà, P

2009-01-01

The birth of Hygiene Package and of the Reg. CE no 2073/2005 in the food production field signalled a change in Italy. This process started in Italy in 1997 with the legislative decree no 155 on Self-control but in reality, it was implemented in the UK in 1990 with the promulgation of the Food Safety Act. This legal act was influenced by some basic rules corresponding to the application of HACCP standards. Since 1990 the British chains of distribution (Retailers) have involved all aspects of the food line in this type of responsibility. Due to this growing awareness for a need for greater regulation, a protocol, edited by British Retail Consortium was created in 1998. This protocol acted as a "stamp" of approval for food products and it is now known as the BRC Global Food Standard. In July 2008, this protocol became effective in its fifth version. After the birth of BRC, also French and German Retailers have established a standard practically equivalent and perhaps more pertinent to safety food, that is International Food Standard (IFS). The new approach is specific to the food field and strictly applies criteria which will ensure "safety, quality and legality" of food products, similarly to ISO 22000:2005 (mainly based on BRC & IFS past experiences). New standards aim to create a sort of green list with fully "proper and fit" Suppliers only, because of comprehensible exigencies of Retailers. It is expected, as we have shown, that Auditor authorities who are responsible for ensuring that inspections are now carried out like the Hygiene Package, will find these new standards useful. The advantages of streamlining this system is that it will allow enterprises to diligently enforce food safety practices without fear of upset or legal consequence, to improve the quality (HACCP) of management & traceability system; to restrict wastes, reprocessing and withdrawal of products. However some discordances about the interpretation of certain sub-field norms (e.g., water

Engineering functional nanothin multilayers on food packaging: ice-nucleating polyethylene films.

Science.gov (United States)

Gezgin, Zafer; Lee, Tung-Ching; Huang, Qingrong

2013-05-29

Polyethylene is the most prevalent plastic and is commonly used as a packaging material. Despite its common use, there are not many studies on imparting functionalities to those films which can make them more desirable for frozen food packaging. Here, commercial low-density polyethylene (LDPE) films were oxidized by UV-ozone (UVO) treatment to obtain a negatively charged hydrophilic surface to allow fabrication of functional multilayers. An increase in hydrophilicity was observed when films were exposed to UVO for 4 min and longer. Thin multilayers were formed by dipping the UVO-treated films into biopolymer solutions, and extracellular ice nucleators (ECINs) were immobilized onto the film surface to form a functional top layer. Polyelectrolyte adsorption was studied and confirmed on silicon wafers by measuring the water contact angles of the layers and investigating the surface morphology via atomic force microscopy. An up to 4-5 °C increase in ice nucleation temperatures and an up to 10 min decrease in freezing times were observed with high-purity deionized water samples frozen in ECIN-coated LDPE films. Films retained their ice nucleation activity up to 50 freeze-thaw cycles. Our results demonstrate the potential of using ECIN-coated polymer films for frozen food application.

Reinforced cassava starch based edible film incorporated with essential oil and sodium bentonite nanoclay as food packaging material.

Science.gov (United States)

Iamareerat, Butsadee; Singh, Manisha; Sadiq, Muhammad Bilal; Anal, Anil Kumar

2018-05-01

Biodegradable packaging in food materials is a green technology based novel approach to replace the synthetic and conventional packaging systems. This study is aimed to formulate the biodegradable cassava starch based films incorporated with cinnamon essential oil and sodium bentonite clay nanoparticles. The films were characterized for their application as a packaging material for meatballs. The cassava starch films incorporated with sodium bentonite and cinnamon oil showed significant antibacterial potential against all test bacteria; Escherichia coli , Salmonella typhimurium and Staphylococcus aureus. Antibacterial effect of films increased significantly when the concentration of cinnamon oil was increased. The cassava starch film incorporated with 0.75% (w/w) sodium bentonite, 2% (w/w) glycerol and 2.5% (w/w) cinnamon oil was selected based on physical, mechanical and antibacterial potential to evaluate shelf life of meatballs. The meatballs stored at ambient temperature in cassava starch film incorporated with cinnamon oil and nanoclay, significantly inhibited the microbial growth till 96 h below the FDA limits (10 6  CFU/g) in foods compared to control films that exceeded above the limit within 48 h. Hence cassava starch based film incorporated with essential oils and clay nanoparticles can be an alternate approach as a packaging material for food industries to prolong the shelf life of products.

High variation in manufacturer-declared serving size of packaged discretionary foods in Australia.

Science.gov (United States)

Haskelberg, Hila; Neal, Bruce; Dunford, Elizabeth; Flood, Victoria; Rangan, Anna; Thomas, Beth; Cleanthous, Xenia; Trevena, Helen; Zheng, Jazzmin Miaobing; Louie, Jimmy Chun Yu; Gill, Timothy; Wu, Jason H Y

2016-05-28

Despite the potential of declared serving size to encourage appropriate portion size consumption, most countries including Australia have not developed clear reference guidelines for serving size. The present study evaluated variability in manufacturer-declared serving size of discretionary food and beverage products in Australia, and how declared serving size compared with the 2013 Australian Dietary Guideline (ADG) standard serve (600 kJ). Serving sizes were obtained from the Nutrition Information Panel for 4466 packaged, discretionary products in 2013 at four large supermarkets in Sydney, Australia, and categorised into fifteen categories in line with the 2013 ADG. For unique products that were sold in multiple package sizes, the percentage difference between the minimum and the maximum serving size across different package sizes was calculated. A high variation in serving size was found within the majority of food and beverage categories - for example, among 347 non-alcoholic beverages (e.g. soft drinks), the median for serving size was 250 (interquartile range (IQR) 250, 355) ml (range 100-750 ml). Declared serving size for unique products that are available in multiple package sizes also showed high variation, particularly for chocolate-based confectionery, with median percentage difference between minimum and maximum serving size of 183 (IQR 150) %. Categories with a high proportion of products that exceeded the 600 kJ ADG standard serve included cakes and muffins, pastries and desserts (≥74 % for each). High variability in declared serving size may confound interpretation and understanding of consumers interested in standardising and controlling their portion selection. Future research is needed to assess if and how standardising declared serving size might affect consumer behaviour.

The Effect of Gamma Irradiation on Yellowness Index (Y I) and Mechanical Properties in Plastic Food Packaging

International Nuclear Information System (INIS)

Tanhindarto, Rindy P.; I, Dian

2002-01-01

An experiment has been done for measuring the yellowness index (Yi) and mechanical properties at food packaging material was caused by gamma irradiation. The samples were obtained from the manufacture. There were three of samples with types of poly acrylonitrile copolymer, PVdC laminated biaxially oriented polypropylene and poly vinyl chloride films. Samples were irradiated at ambient temperature by gamma rays with the doses of 0 up to 100 kGy. Yellowness Index (Yi) of sample was carried out by using chromameter Hunter Lab system. while mechanical properties measuring by stragraph. The purpose of the present experiment was the yellowness index (Yi) and mechanical properties of food packaging material after and before the irradiation. The effects of I year storage on irradiated and unirradiated samples were also investigated. The results showed that best of three samples of plastic food packaging was poly acrylonitrile copolymer film because the Yellowness Index (Yi) and mechanical properties of poly acrylonitrile copolymer did not give any measurable change on the plastic treated by irradiation up to 100 kGy. Storage for 1 year gave some measurable changes of e Yellowness Index (Yi) and mechanical properties on all the samples examined

Fluorochemicals used in food packaging inhibit male sex hormone synthesis

DEFF Research Database (Denmark)

Rosenmai, Anna Kjerstine; Nielsen, F. K.; Pedersen, Mikael

2013-01-01

Polyfluoroalkyl phosphate surfactants (PAPS) are widely used in food contact materials (FCMs) of paper and board and have recently been detected in 57% of investigated materials. Human exposure occurs as PAPS have been measured in blood; however knowledge is lacking on the toxicology of PAPS. The....... Overall, these results demonstrate that fluorochemicals present in food packaging materials and their metabolites can affect steroidogenesis through decreased Bzrp and increased CYP19 gene expression leading to lower androgen and higher estrogen levels.......Polyfluoroalkyl phosphate surfactants (PAPS) are widely used in food contact materials (FCMs) of paper and board and have recently been detected in 57% of investigated materials. Human exposure occurs as PAPS have been measured in blood; however knowledge is lacking on the toxicology of PAPS....... The aim of this study was to elucidate the effects of six fluorochemicals on sex hormone synthesis and androgen receptor (AR) activation in vitro. Four PAPS and two metabolites, perfluorooctanoic acid (PFOA) and 8:2 fluorotelomer alcohol (8:2 FTOH) were tested. Hormone profiles, including eight steroid...

Leaching-resistant carrageenan-based colorimetric oxygen indicator films for intelligent food packaging.

Science.gov (United States)

Vu, Chau Hai Thai; Won, Keehoon

2014-07-23

Visual oxygen indicators can give information on the quality and safety of packaged food in an economic and simple manner by changing color based on the amount of oxygen in the packaging, which is related to food spoilage. In particular, ultraviolet (UV)-activated oxygen indicators have the advantages of in-pack activation and irreversibility; however, these dye-based oxygen indicator films suffer from dye leaching upon contact with water. In this work, we introduce carrageenans, which are natural sulfated polysaccharides, to develop UV-activated colorimetric oxygen indicator films that are resistant to dye leakage. Carrageenan-based indicator films were fabricated using redox dyes [methylene blue (MB), azure A, and thionine], a sacrificial electron donor (glycerol), an UV-absorbing photocatalyst (TiO2), and an encapsulation polymer (carrageenan). They showed even lower dye leakage in water than conventional oxygen indicator films, owing to the electrostatic interaction of anionic carrageenan with cationic dyes. The MB/TiO2/glycerol/carrageenan oxygen indicator film was successfully bleached upon UV irradiation, and it regained color very rapidly in the presence of oxygen compared to the other waterproof oxygen indicator films.

ANTIMICROBIALS USED IN ACTIVE PACKAGING FILMS

OpenAIRE

Dıblan, Sevgin; Kaya, Sevim

2017-01-01

Active packaging technology is one of the innovativemethods for preserving of food products, and antimicrobial packaging films is amajor branch and promising application of this technology. In order to controlmicrobial spoilage and also contamination of pathogen onto processed or fresh food,antimicrobial agent(s) is/are incorporated into food packaging structure.Polymer type as a carrier of antimicrobial can be petroleum-based plastic orbiopolymer: because of environmental concerns researcher...

Polyfluoroalkyl phosphate esters and perfluoroalkyl carboxylic acids in target food samples and packaging--method development and screening.

Science.gov (United States)

Gebbink, Wouter A; Ullah, Shahid; Sandblom, Oskar; Berger, Urs

2013-11-01

Polyfluoroalkyl phosphate mono-, di-, and tri-esters (mono-, di-, and triPAPs) are used to water- and grease-proof food packaging materials, and these chemicals are known precursors to perfluoroalkyl carboxylic acids (PFCAs). Existing analytical methods for PAPs lack sample clean-up steps in the sample preparation. In the present study, a method based on ultra performance liquid chromatography coupled to tandem mass spectrometry (UPLC/MS/MS) was developed and optimized for the analysis of mono-, di-, and triPAPs, including a clean-up step for the raw extracts. The method was applied to food samples and their PAP-containing packaging materials. The optimized UPLC/MS/MS method enabled the separation and identification of a total of 4 monoPAPs, 16 diPAPs, and 7 triPAPs in the technical mixture Zonyl®-RP. For sample clean-up, weak anion exchange solid phase extraction columns were tested. PAPs standard solutions spiked onto the columns were separated into a fraction containing neutral compounds (triPAPs) and a fraction with ionic compounds (mono- and diPAPs) with recoveries between 72-110%. Method limits of quantification for food samples were in the sub to low picogram per gram range. For quantitative analysis of PAPs, compound-specific labeled internal standards showed to be essential as sorption and matrix effects were observed. Mono-, di-, and/or triPAPs were detected in all food packaging materials obtained from the Swedish market. Up to nine diPAPs were detected in the food samples, with the 6:2/6:2 and 6:2/8:2 diPAPs as the dominant compounds. DiPAP concentrations in the food samples ranged from 0.9 to 36 pg/g, which was comparable to individual PFCA concentrations in the same samples. Consumption of food packed in PAP-containing materials could be an indirect source of human exposure to PFCAs.

Optical transparency and mechanical properties of semi-refined iota carrageenan film reinforced with SiO2 as food packaging material

Science.gov (United States)

Aji, Afifah Iswara; Praseptiangga, Danar; Rochima, Emma; Joni, I. Made; Panatarani, Camellia

2018-02-01

Food packaging is important for protecting food from environmental influences such as heat, light, water vapor, oxygen, dirt, dust particles, gas emissions and so on, which leads to decrease the quality of food. The most widely used type of packaging in the food industry is plastic which is made from synthetic polymers and takes hundreds of years to biodegrade. Recently, food packaging with high bio-degradability is being developed using biopolymer combined with nanoparticles as reinforcing agent (filler) to improve its properties. In this study, semi-refined iota carrageenan films were prepared by incorporating SiO2 nanoparticles as filler at different concentrations (0%, 0.5%, 1.0% and 1.5% w/w carrageenan) using solution casting method. The optical transparency and mechanical properties (tensile strength and elongation at break) of the films were analyzed. The results showed that incorporation of SiO2 nanoparticles to carrageenan matrix on optical transparency of the films. For the mechanical properties, the highest tensile strength was found for incorporation of 0.5% SiO2, while the elongation at break of the films improved with increasing SiO2 concentration.

Can A Food Retailer-Based Healthier Foods Initiative Improve The Nutrient Profile Of US Packaged Food Purchases? A Case Study Of Walmart, 2000-2013

Science.gov (United States)

Smith, Lindsey; Ng, Shu Wen; Popkin, Barry M.

2015-01-01

Healthier foods initiatives (HFIs) by national food retailers offer an opportunity to improve the nutritional profile of packaged food purchases (PFPS). Using a longitudinal dataset of US household PFPs, with methods to account for selectivity of shopping at a specific retailer, we modeled the effect of Walmart’s HFI using counterfactual simulations to examine observed vs. expected changes in the nutritional profile of Walmart PFPs. From 2000 to 2013, Walmart PFPs showed major declines in energy, sodium, and sugar density, as well as declines in sugary beverages, grain-based desserts, snacks, and candy, beyond trends at similar retailers. However, post-HFI declines were similar to what we expected based on pre-HFI trends, suggesting that these changes were not attributable to Walmart’s HFI. These results suggest that food retailer-based HFIs may not be sufficient to improve the nutritional profile of food purchases. PMID:26526244

Detection of bisphenol A in food packaging based on fluorescent conjugated polymer PPESO3 and enzyme system.

Science.gov (United States)

Huang, Hui; Li, Yongxin; Liu, Jintong; Tong, Jin; Su, Xingguang

2015-10-15

Bisphenol A (BPA) is a kind of carcinogen, which can interfere with the body's endocrine system. In this paper, a new kind of fluorescent sensor for BPA detection was established based on the fluorescent conjugated polymer PPESO3. The oxidative product of BPA is able to quench PPESO3 in the presence of HRP and H2O2, and the quenched PL intensity of PPESO3 was proportionally to the concentration of BPA in the range of 1-100 μmol/L with a detection limit of 4 × 10(-7) mol/L. The proposed method has been applied to detect BPA in eight food packaging samples with satisfactory results. The proposed method has the potential for the assay of BPA in food or food packaging samples. Copyright © 2015 Elsevier Ltd. All rights reserved.

FLEXIBLE FOOD PACKAGING LABORATORY

Data.gov (United States)

Federal Laboratory Consortium — This laboratory contains equipment to fabricate and test prototype packages of many types and sizes (e.g., bags, pouches, trays, cartons, etc.). This equipment can...

Biodegradable composites from polyester and sugar beet pulp with antimicrobial coating for food packaging

Science.gov (United States)

Totally biodegradable, double-layered antimicrobial composite Sheets were introduced for food packaging. The substrate layers of the sheets were prepared from poly (lactic acid) (PLA) and sugar beet pulp (SBP) or poly (butylene adipate-co-terephthalate (PBAT) and SBP by a twin-screw extruder. The ac...

Active Bilayer PE/PCL Films for Food Packaging Modified with Zinc Oxide and Casein

Directory of Open Access Journals (Sweden)

Ana Rešček

2015-12-01

Full Text Available This paper studies the properties of active polymer food packaging bilayer polyethylene/polycaprolactone (PE/PCL films. Such packaging material consists of primary PE layer coated with thin film of PCL coating modified with active component (zinc oxide or zinc oxide/casein complex with intention to extend the shelf life of food and to maintain the quality and health safety. The influence of additives as active components on barrier, mechanical, thermal and antimicrobial properties of such materials was studied. The results show that, in comparison to the neat PE and PE/PCL films, some of PE/PCL bilayer films with additives exhibit improved barrier properties i.e. decreased water vapour permeability. Higher thermal stability of modified PE/PCL material is obtained due to a modified mechanism of thermal degradation. The samples with the additive nanoparticles homogeneously dispersed in the polymer matrix showed good mechanical properties. Addition of higher ZnO content contributes to the enhanced antibacterial activity of a material.

The Impact of the 2009 Special Supplemental Nutrition Program for Women, Infants, and Children Food Package Revisions on Participants: A Systematic Review.

Science.gov (United States)

Schultz, Daniel Joseph; Byker Shanks, Carmen; Houghtaling, Bailey

2015-11-01

For the first time since 1980, the US Department of Agriculture Food and Nutrition Service Special Supplemental Nutrition Program for Women, Infants, and Children (WIC) food package policies were revised in 2009 to meet the Institute of Medicine's nutrition recommendations. These changes included increases in fruits, vegetables, whole grains, and low-fat dairy to improve nutrition and health of WIC participants. Our systematic review of the literature assessed the influence that the 2009 WIC food package revisions have had on dietary intake, healthy food and beverage availability, and breastfeeding participation. The systematic review followed Preferred Reporting Items for Systematic Reviews and Meta-Analyses recommendations. Four electronic databases were searched between April 1 and 30, 2014, for peer-reviewed research. Two reviewers screened the articles, extracted the data, and established inter-rater reliability by discussing and resolving discrepancies. Twenty articles were included that met our inclusion criteria. Nine of the studies analyzed changes in dietary intake, eight examined changes in healthy food and beverage availability, and three evaluated breastfeeding participation exclusively. The review demonstrated an improved dietary intake and an increase in the availability of healthier foods and beverages in authorized WIC stores. The revised food package was also associated with improved dietary intake of WIC participants. Mixed results were demonstrated in regard to improved breastfeeding outcomes. Further research is needed to assess the influence of WIC 2009 food package revisions on breastfeeding outcomes and to make conclusions about broad nutrition-related implications. Copyright © 2015 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Industrial Production of Food Plastic Packaging and the Use of Irradiation for Modifying Some Film Properties. Chapter 5

Energy Technology Data Exchange (ETDEWEB)

Ortiz, A. V.; Moura, E. A.B., [Nuclear and Energy Research Institute - IPEN - São Paulo (Brazil); Nuclear and Energy National Commission – CNEN, Rio de Janeiro (Brazil)

2014-07-15

The four main industrial processes needed to produce a plastic packaging structure are: cast extrusion, blown extrusion, injection moulding, and blown moulding. Since one polymer may not offer all the protection and marketing properties required for a specific food product, multilayer films can be produced. Each layer will be composed of a different polymer and additives to meet all the requirements. Ionizing radiation plays an important role in the packaging industry, especially in the heat shrinkable barrier film production process. In this process, irradiating the film structure is aimed mostly at the crosslinking of the polyolefin. Cross-linked polyolefin-based films can withstand higher stretching rates, be better stabilized, and will both have a high degree of shrinkage and higher shrinking forces. This leads to very thin structures with very well balanced cost-benefit ratios and better final packaging presentation. The use of ionizing radiation for cross-linking polymers is one of the most successful cases of irradiation used by the industry. Besides cross-linking, scission may also occur in the polymeric structure, and it may liberate toxic or unwanted substances that can be transferred to the food. Therefore, irradiated food packaging materials should be thoroughly assessed according to active legislation to guarantee that it will not harm the consumer’s health either in the short or the long term. (author)

Application of humidity-controlled dynamic mechanical analysis (DMA-RH) to moisture-sensitive edible casein films for use in food packaging

Science.gov (United States)

Protein-based and other hydrophilic thin films are promising materials for the manufacture of edible food packaging and other food and non-food applications. Calcium caseinate (CaCas) films are highly hygroscopic and physical characterization under broad environmental conditions is critical to appli...

Computer aided simulation for developing a simple model to predict cooling of packaged foods

DEFF Research Database (Denmark)

Christensen, Martin Gram; Feyissa, Aberham Hailu; Adler-Nissen, Jens

A new equation to predict equilibrium temperatures for cooling operations of packaged foods has been deducted from the traditional 1st order solution to Fourier’s heat transfer equations. The equation is analytical in form and only requires measurable parameters, in form of area vs. volume ratio (A...

77 FR 50716 - Certain Food Waste Disposers and Components and Packaging Thereof; Notice of Commission...

Science.gov (United States)

2012-08-22

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-838] Certain Food Waste Disposers and Components and Packaging Thereof; Notice of Commission Determination Not to Review an Initial Determination Granting Complainant's Motions To Amend the Notice of Investigation and Complaint AGENCY: U.S...

The future of active and intelligent packaging industry

Directory of Open Access Journals (Sweden)

Renata Dobrucka

2013-06-01

Full Text Available Background: Innovation in food and beverage packaging is mostly driven by consumer needs and demands influenced by changing global trends, such as increased life expectancy, fewer organizations investing in food production and distribution. Food industry has seen great advances in the packaging sector since its inception in the 18th century with most active and intelligent innovations occurring during the past century. These advances have led to improved food quality and safety. Active and intelligent packaging is new and exciting area of technology  which efficient contemporary consumer response. Materials and methods: On the basis of broad review of the current state of the art in world literature, the market active and intelligent packaging is discussed. Results: This paper shows present innovation in the market active and intelligent packaging. Conclusion: Research and development in the field of active and intelligent packaging materials is very dynamic and develops in relation with the search for environment friendly packaging solutions. Besides, active and intelligent packaging is becoming more and more widely used for food products. The future of this type of packaging system seems to be very interesting.

PP/clay nanocomposite films for food package; Filmes de nanocomposito PP/argila organofilica para embalagens de alimentos

Energy Technology Data Exchange (ETDEWEB)

Araujo, Arthur R.A.; Silva, Suedina M.L., E-mail: suedina@dema.ufcg.ed [Universidade Federal de Campina Grande (UAEMat/UFCG), PB (Brazil). Unidade Academica de Engenharia de Materiais; Andrade, Daniela L.A.C.S. [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Programa de Pos-Graduacao em Engenharia de Processos; Mesquita, Wandemberg B [Felinto Industria e Comercio Ltda., Campina Grande, PB (Brazil)

2009-07-01

Small contents of organoclays (1 wt %) were incorporated to PP modified with maleic anhydride by melt intercalation, in order to prepare polymeric films for further applications in food package sector. The films were characterized by X-ray diffraction (XRD) and mechanical properties. The data indicates that the incorporation of organoclay to PP results in transparent films with intercalated morphology and highly. The mechanical properties of nanocomposites films were superior from those pristine films. The results evidences that the PP/PP-g-MA/organoclay nanocomposite films, prepared in this study might be promissory to the food package market and, in short time, be used like a new product by industries of this sector. (author)

Research on food healthiness : Supporting decisions on public health, package design, and everyday consumption situations

OpenAIRE

Yarar, Nadine

2017-01-01

Food marketing can be used as a means to combat the current obesity epidemic by increasing the healthiness of a consumer’s diet. The negative and positive influence of marketing practices on food intake has been investigated for advertisement via traditional (media) and modern (online, in-store, events, etc.) channels, branding campaigns, or product placement. Another increasingly applied, yet underresearched marketing tool to communicate with consumers is product packaging. Therefore, this c...

Pilot Fullerton plans menu as packaged food and beverages float around him

Science.gov (United States)

1982-01-01

Pilot C. Gordon Fullerton, wearing the communications carrier assembly (ASSY) mini headset (HDST), beings food preparation on the middeck. Canned goods, sealed packages, beverage containers, etc are attached with velcro to meal tray assemblies (secured on middeck forward lockers) and freefloat around Fullerton. JSC water dispenser kit and portrait of G.W.S. Abbey appears behind Fullerton on port side bulkhead and potable water tank appears below him.

21 CFR 610.61 - Package label.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 7 2010-04-01 2010-04-01 false Package label. 610.61 Section 610.61 Food and... GENERAL BIOLOGICAL PRODUCTS STANDARDS Labeling Standards § 610.61 Package label. The following items shall appear on the label affixed to each package containing a product: (a) The proper name of the product; (b...

The Garbage Project Revisited: From a 20th Century Archaeology of Food Waste to a Contemporary Study of Food Packaging Waste

Directory of Open Access Journals (Sweden)

La Vergne Lehmann

2015-06-01

Full Text Available In 1973, Dr. Bill Rathje and his students at the University of Arizona began what was to become a two decade long investigation into American consumer waste habits. An archaeologist by profession, Rathje decided to adapt traditional archaeological methods and apply them to contemporary archaeological situations. This provided a platform for improving the understanding of what was really happening with, amongst other forms of waste, food at the consumer household level. The Garbage Project was able to study consumer behaviours directly from the material realities they left behind rather than from self-conscious self-reports of surveys and interviews. Using the same rationale, this study developed a profile of the packaged and processed food consumption in three regional Victorian municipalities. The main findings identified that consumers were limited to the food retail opportunities closest to their home and that they took greater care to wash out recyclables if they were placed in the recycling bin compared to the same item placed in a kerbside landfill bin. There was also an apparent lack of understanding about appropriate food storage and buying for purpose, especially with regard to the volume of the item they purchased, which appears to result in partially used recyclable containers being put in the kerbside landfill bin. By understanding the nature of the packaging and food that has been thrown away, it is possible to develop a narrative around what people understand about food purchasing practices, longevity, storage and how they use it at home. This in turn can assist community engagement and education around nutrition, meal planning and purchasing as well as community waste education.

Application of in silico modelling to estimate toxicity of migrating substances from food packaging.

Science.gov (United States)

Price, Nicholas; Chaudhry, Qasim

2014-09-01

This study derived toxicity estimates for a set of 136 chemical migrants from food packaging materials using in silico (computational) modelling and read across approaches. Where available, the predicted results for mutagenicity and carcinogenicity were compared with published experimental data. As the packaging compounds are subject to safety assessment, the migrating substances were more likely to be negative for both the endpoints. A set of structural analogues with positive experimental data for carcinogenicity and/or mutagenicity was therefore used as a positive comparator. The results showed that a weight of evidence assembled from different in silico models and read-across from already-tested structurally similar compounds can provide a rapid and reliable means for rapid screening of new yet-untested intentional or unintentional chemical compounds that may migrate to packaged foodstuffs. Crown Copyright © 2014. Published by Elsevier Ltd. All rights reserved.

Biobased Packaging - Application in Meat Industry

Directory of Open Access Journals (Sweden)

S. Wilfred Ruban

2009-04-01

Full Text Available Because of growing problems of waste disposal and because petroleum is a nonrenewable resource with diminishing quantities, renewed interest in packaging research is underway to develop and promote the use of “bio-plastics.” In general, compared to conventional plastics derived from petroleum, bio-based polymers have more diverse stereochemistry and architecture of side chains which enable research scientists a greater number of opportunities to customize the properties of the final packaging material. The primary challenge facing the food (Meat industry in producing bio-plastic packaging, currently, is to match the durability of the packaging with product shelf-life. Notable advances in biopolymer production, consumer demand for more environmentally-friendly packaging, and technologies that allow packaging to do more than just encompass the food are driving new and novel research and developments in the area of packaging for muscle foods. [Vet. World 2009; 2(2.000: 79-82

Eco-friendly biorefractory films of gelatin and TEMPO-oxidized cellulose ester for food packaging application.

Science.gov (United States)

Zhuang, Chen; Tao, Furong; Cui, Yuezhi

2017-08-01

In recent years, many types of food-packaging films and composites have been prepared using gelatin because of its good film-forming ability, non-toxic nature and cost-effectiveness. However, the relatively weak thermal stability, poor mechanical properties and easily-degradable quality limit the potential application of gelatin as a practical material. Microcrystalline cellulose (MCC), which comprises one of the most abundant biomass resources, has been regarded as a safe and reliable food additive because it has the same ingredients as the cellulose in people's daily intake. Food-packaging films with the excellent properties provided by gelatin and oxidized-cellulose represent a topic of great interest. MCC was modified by 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-mediated oxidation and chosen as the base of the macromolecule cross-linker (TMN). After modification of gelatin film by TMN, the minimum amount of free -NH 2 in solution was 4.8 × 10 -4  mol g -1 ). The thermal property obviously increased (from 322.31  o C to 352.63  o C) and was crucial for usage in the food industry. The highest water contact value 123.09° (η = 25%) indicated a better surface hydrophobicity. The higher E ab (58.88%) and lower E m (77.16%) demonstrated that a more flexible and shatter-proof material was obtained. Water vapor uptake studies suggested increased moisture absorption and greater swelling ability. The film material obtained in the present study was safe, stable, eco-friendly and biorefractory and could also be decomposed completely by the environment after disposal as a result of the properties of the ingredients gelatin and cellulose. The incorporation of a cellulosic cross-linker to gelatin-based films was an ideal choice with respect to developing a packaging for the food industry. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Inactivation of possible microorganism food contaminants on packaging foils using nonthermal plasma and hydrogen peroxide

International Nuclear Information System (INIS)

Scholtz, V.; Khun, J.; Soušková, H.; Čeřovský, M.

2015-01-01

The inactivation effect of nonthermal plasma generated in electric discharge burning in air atmosphere with water or hydrogen peroxide aerosol for the application to the microbial decontamination of packaging foils is studied. The microbial inactivation is studied on two bacterial, two yeasts, and two filamentous micromycete species. The inactivation of all contaminating microorganisms becomes on the area of full 8.5 cm in diameter circular sample after short times of several tens of seconds. Described apparatus may present a possible alternative method of microbial decontamination of food packaging material or other thermolabile materials

Inactivation of possible microorganism food contaminants on packaging foils using nonthermal plasma and hydrogen peroxide

Energy Technology Data Exchange (ETDEWEB)

Scholtz, V., E-mail: Vladimir.Scholtz@vscht.cz; Khun, J. [Institute of Chemical Technology in Prague, Department of Physics and Measurements, Faculty of Chemical Engineering (Czech Republic); Soušková, H. [Institute of Chemical Technology in Prague, Department of Computing and Control Engineering, Faculty of Chemical Engineering (Czech Republic); Čeřovský, M. [Institute of Chemical Technology in Prague, Department of Food Preservation, Faculty of Food and Biochemical Technology (Czech Republic)

2015-07-15

The inactivation effect of nonthermal plasma generated in electric discharge burning in air atmosphere with water or hydrogen peroxide aerosol for the application to the microbial decontamination of packaging foils is studied. The microbial inactivation is studied on two bacterial, two yeasts, and two filamentous micromycete species. The inactivation of all contaminating microorganisms becomes on the area of full 8.5 cm in diameter circular sample after short times of several tens of seconds. Described apparatus may present a possible alternative method of microbial decontamination of food packaging material or other thermolabile materials.

Influence of Food with High Moisture Content on Oxygen Barrier Property of Polyvinyl Alcohol (PVA)/Vermiculite Nanocomposite Coated Multilayer Packaging Film.

Science.gov (United States)

Kim, Jung Min; Lee, Min Hyeock; Ko, Jung A; Kang, Dong Ho; Bae, Hojae; Park, Hyun Jin

2018-02-01

This study investigates the potential complications in applying nanoclay-based waterborne coating to packaging films for food with high moisture content. Multilayer packaging films were prepared by dry laminating commercially available polyvinyl alcohol (PVA)/vermiculite nanocomposite coating films and linear low-density polyethylene film, and the changes in oxygen barrier properties were investigated according to different relative humidity using 3 types of food simulants. When the relative humidity was above 60%, the oxygen permeability increased sharply, but this was reversible. Deionized water and 3% acetic acid did not cause any large structural change in the PVA/vermiculite nanocomposite but caused a reversible deterioration of the oxygen barrier properties. In contrast, 50% ethanol, a simulant for the semifatty food, induced irreversible structural changes with deterioration of the oxygen barrier property. These changes are due to the characteristics of PVA rather than vermiculite. We believe this manuscript would be of interest to the wide group of researchers, organizations, and companies in the field of developing nanoclay-based gas barrier packaging for foods with high moisture content. Hence, we wish to diffuse our knowledge to the scientific community. © 2018 Institute of Food Technologists®.

Technological Innovations in the Food Packaging: a case study of adoption of active packaging in coffee roaster companies

Directory of Open Access Journals (Sweden)

Mário Otávio Batalha

2010-12-01

Full Text Available Most of technological innovations in agro-food systems are created by “supporting industries”, the group where packaging industries are inserted. This article presents the packaging innovations used in food industries, particularly, the active packaging. This paper deals with an adoption case of a degassing one-way valve, describing this innovation and its impacts in two coffee companies. This study can be classified as a documental, qualitative-descriptive and empirical research, using indirect documentation technique and case study analysis. According to this case, the valve made possible the diversification of the company product line and product quality improvement. There were no complications involving an additional cost to the customers. However, it has been observed that this additional cost from technology adoption makes difficult the diffusion of this valve in other similar products.Grande parcela das inovações tecnológicas dos sistemas agroindustriais é gerada pelas “indústrias de apoio”, grupo no qual as indústrias de embalagens se inserem. Esse artigo discute as inovações em embalagens destinadas à indústria de alimentos, em especial as chamadas embalagens ativas. Discute-se o caso de adoção da válvula unidirecional de alívio de gases, descrevendo a inovação e seus impactos em duas indústria processadoras de café nas empresas. A pesquisa desenvolvida é de ordem documental e qualitativo-descritiva de caráter empírica, usando técnica de análise de documentação indireta e estudo de caso . No caso abordado, a válvula possibilitou a diversificação da linha de produtos e o incremento da sua qualidade, não havendo complicações no que se refere ao repasse do custo adicional para o consumidor desse produto. Contudo, verifica-se que esse custo adicional da adoção da tecnologia dificulta a difusão da válvula em produtos similares.

ACTIVE PACKAGING SYSTEM FOR MEAT AND MEAT PRODUCTS

Directory of Open Access Journals (Sweden)

Adriana Pavelková

2012-10-01

Full Text Available In the recent past, food packaging was used to enable marketing of products and to provide passive protection against environmental contaminations or influences that affect the shelf life of the products. However, unlike traditional packaging, which must be totally inert, active packaging is designed to interact with the contents and/or the surrounding environment. Interest in the use of active packaging systems for meat and meat products has increased in recent years. Active packaging systems are developed with the goal of extending shelf life for foods and increasing the period of time that the food is high quality. Developments in active packaging have led to advances in many areas, including delayed oxidation and controlled respiration rate, microbial growth, and moisture migration. Active packaging technologies include some physical, chemical, or biological action which changes interactions between a package, product, and/or headspace of the package in order to get a desired outcome. Active packaging systems discussed include oxygen scavengers, carbon dioxide scavengers and emitters, moisture control agents, flavour/odour absorbers and releasers  and antimicrobial packaging technologies. Active packaging is typically found in two types of systems; sachets and pads which are placed inside of packages, and active ingredients that are incorporated directly into packaging materials.  Recognition of the benefits of active packaging technologies by the food industry, development of economically viable packaging systems and increased consumer acceptance is necessary for commercial realisation of these packaging technologies.doi:10.5219/205

Time temperature indicators as devices intelligent packaging

Directory of Open Access Journals (Sweden)

Adriana Pavelková

2013-01-01

Full Text Available Food packaging is an important part of food production. Temperature is a one of crucial factor which affecting the quality and safety of food products during distribution, transport and storage. The one way of control of food quality and safety is the application of new packaging systems, which also include the intelligent or smart packaging. Intelligent packaging is a packaging system using different indicators for monitoring the conditions of production, but in particular the conditions during transport and storage. Among these indicators include the time-temperature indicators to monitor changes in temperature, which is exposed the product and to inform consumers about the potential risks associated with consumption of these products. Time temperature indicators are devices that show an irreversible change in a physical characteristic, usually color or shape, in response to temperature history. Some are designed to monitor the evolution of temperature with time along the distribution chain and others are designed to be used in the consumer packages.

Poly(Neopentyl Glycol Furanoate): A Member of the Furan-Based Polyester Family with Smart Barrier Performances for Sustainable Food Packaging Applications

OpenAIRE

Laura Genovese; Nadia Lotti; Valentina Siracusa; Andrea Munari

2017-01-01

In the last decade, there has been an increased interest from the food packaging industry toward the development and application of bioplastics, to contribute to the sustainable economy and to reduce the huge environmental problem afflicting the planet. In the present work, we focus on a new furan-based polyester, poly(neopentyl glycol 2,5-furanoate) (PNF) to be used for sustainable food packaging applications. The aromatic polyester was successfully synthesized with high molecular weight, th...

Designing a packaging to promote healthy and low-fat foods: Adolescents versus young-adults.

Science.gov (United States)

Vila-López, Natalia; Küster-Boluda, Ines; Sarabia-Sánchez, Francisco

2017-09-01

Packaging is a relevant tool when adolescents and young adults search for low-fat and healthy foods. However, the power of a packaging is not homogenous. In this framework, two main objectives guide our work: (i) to investigate to what extent visual cues (size, colors, images etc.) are more important than informational cues (label); (ii) to analyze if adolescents and young adults pay equal attention to both packaging cues. 590 adolescents between 12 and 18years of age were interviewed at the door of both public and private schools. Additionally, 300 young adults between 19 and 25years of age were contacted. Their opinions were analyzed twice using structural modelling techniques: (i) without considering age differences and (ii) splitting the sample into adolescents (590 participants) and young-adults (300 participants) to compare their perceptions. Our results have showed that when looking for healthy and low-fat aliments visual cues (size, colors, images etc.) are more important than informational cues (label design, easily understandable words, size of the letters). Additionally, age is a pertinent variable to explain alternative packaging strategies, because adolescents and young adults do not pay equal attention to both packaging cues. Copyright © 2017. Published by Elsevier Ltd.

Tests of potential functional barriers for laminated multilayer food packages. Part I: Low molecular weight permeants.

Science.gov (United States)

Simal-Gándara, J; Sarria-Vidal, M; Koorevaar, A; Rijk, R

2000-08-01

The advent of the functional barrier concept in food packaging has brought with it a requirement for fast tests of permeation through potential barrier materials. In such tests it would be convenient for both foodstuffs and materials below the functional barrier (sub-barrier materials) to be represented by standard simulants. By means of inverse gas chromatography, liquid paraffin spiked with appropriate permeants was considered as a potential simulant of sub-barrier materials based on polypropylene (PP) or similar polyolefins. Experiments were performed to characterize the kinetics of the permeation of low molecular weight model permeants (octene, toluene and isopropanol) from liquid paraffin, through a surrogate potential functional barrier (25 microns-thick oriented PP) into the food stimulants olive oil and 3% (w/v) acetic acid. These permeation results were interpreted in terms of three permeation kinetic models regarding the solubility of a particular model permeant in the post-barrier medium (i.e. the food simulant). The results obtained justify the development and evaluation of liquid sub-barrier simulants that would allow flexible yet rigorous testing of new laminated multilayer packaging materials.

Food packaging design

NARCIS (Netherlands)

Dekker, M.

2007-01-01

'Food product design - An integrated approach' deals with food product design from a technological perspective. It presents creative techniques for the innovation process and structured methodologies to translate consumer wishes into product properties based on Quality Function Deployment.

Indian meal moth (Plodia interpunctella)-resistant food packaging film development using microencapsulated cinnamon oil.

Science.gov (United States)

Kim, In-Hah; Song, Ah Young; Han, Jaejoon; Park, Ki Hwan; Min, Sea C

2014-10-01

Insect-resistant laminate films containing microencapsulated cinnamon oil (CO) were developed to protect food products from the Indian meal moth (Plodia interpunctella). CO microencapsulated with polyvinyl alcohol was incorporated with a printing ink and the ink mixture was applied to a low-density polyethylene (LDPE) film as an ink coating. The coated LDPE surface was laminated with a polypropylene film. The laminate film impeded the invasion of moth larvae and repelled the larvae. The periods of time during which cinnamaldehyde level in the film remained above a minimum repelling concentration, predicted from the concentration profile, were 21, 21, and 10 d for cookies, chocolate, and caramel, respectively. Coating with microencapsulated ink did not alter the tensile or barrier properties of the laminate film. Microencapsulation effectively prevented volatilization of CO. The laminate film can be produced by modern film manufacturing lines and applied to protect food from Indian meal moth damage. The LDPE-PP laminate film developed using microencapsulated cinnamon oil was effective to protect the model foods from the invasion of Indian meal moth larvae. The microencapsulated ink coating did not significantly change the tensile and barrier properties of the LDPE-PP laminate film, implying that replacement of the uncoated with coated laminate would not be an issue with current packaging equipment. The films showed the potential to be produced in commercial film production lines that usually involve high temperatures because of the improved thermal stability of cinnamon oil due to microencapsulation. The microencapsulated system may be extended to other food-packaging films for which the same ink-printing platform is used. © 2014 Institute of Food Technologists®

Racial/Ethnic Differences in Dietary Intake among WIC Families Prior to Food Package Revisions

Science.gov (United States)

Kong, Angela; Odoms-Young, Angela M.; Schiffer, Linda A.; Berbaum, Michael L.; Porter, Summer J.; Blumstein, Lara; Fitzgibbon, Marian L.

2013-01-01

Objective: To compare the diets of African American and Hispanic families in the Special Supplemental Nutrition Program for Women, Infants, and Children (WIC) prior to the 2009 food package revisions. Methods: Mother-child dyads were recruited from 12 WIC sites in Chicago, IL. Individuals with 1 valid 24-hour recall were included in the analyses…

Identification of intentionally and non-intentionally added substances in plastic packaging materials and their migration into food products.

Science.gov (United States)

García Ibarra, Verónica; Rodríguez Bernaldo de Quirós, Ana; Paseiro Losada, Perfecto; Sendón, Raquel

2018-05-07

Plastic materials are widely used in food packaging applications; however, there is increased concern because of the possible release of undesirable components into foodstuffs. Migration of plastic constituents not only has the potential to affect product quality but also constitutes a risk to consumer health. In order to check the safety of food contact materials, analytical methodologies to identify potential migrants are required. In the first part of this work, a GC/MS screening method was developed for the identification of components from plastic packaging materials including intentionally and "non-intentionally added substances" (NIAS) as potential migrants. In the second part of this study, the presence of seven compounds (bis (2-ethylhexyl) phthalate (DEHP), diethyl phthalate (DEP), diisobutyl phthalate (DIBP), dibutyl phthalate (DBP), butylated hydroxytoluene (BHT), acetyl tributyl citrate (ATBC), benzophenone (BP)) previously identified in packaging materials were investigated in food products (corn and potatoes snacks, cookies, and cakes). For this purpose, a suitable extraction method was developed and quantification was performed using GC-MS. The developed method was validated in terms of linearity, recovery, repeatability, and limits of detection and quantification. The spiked recoveries varied between 82.7 and 116.1%, and relative standard deviation (RSD) was in the range of 2.22-15.9%. The plasticizer ATBC was the most detected compound (94% samples), followed by DEP (65%), DEHP (47%), BP (44%), DBP (35%), DIBP (21%), and BHT (12%). Regarding phthalates, DEP and DEHP were the most frequently detected compounds in concentrations up to 1.44 μg g -1 . In some samples, only DBP exceeded the European SML of 0.3 mg kg -1 established in Regulation 10/2011. Graphical abstract Chemical migration from plastic packaging into food.

78 FR 1881 - Certain Food Waste Disposers and Components and Packaging Thereof; Notice of the Commission's...

Science.gov (United States)

2013-01-09

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-838] Certain Food Waste Disposers and Components and Packaging Thereof; Notice of the Commission's Determination Not To Review Initial Determinations Granting Complainant's Motions To Partially Terminate the Investigation and To Withdraw the...

Portion, package or tableware size for changing selection and consumption of food, alcohol and tobacco

Science.gov (United States)

Hollands, Gareth J; Shemilt, Ian; Marteau, Theresa M; Jebb, Susan A; Lewis, Hannah B; Wei, Yinghui; Higgins, Julian Pt; Ogilvie, David

2015-01-01

Background Overeating and harmful alcohol and tobacco use have been linked to the aetiology of various non-communicable diseases, which are among the leading global causes of morbidity and premature mortality. As people are repeatedly exposed to varying sizes and shapes of food, alcohol and tobacco products in environments such as shops, restaurants, bars and homes, this has stimulated public health policy interest in product size and shape as potential targets for intervention. Objectives 1) To assess the effects of interventions involving exposure to different sizes or sets of physical dimensions of a portion, package, individual unit or item of tableware on unregulated selection or consumption of food, alcohol or tobacco products in adults and children. 2) To assess the extent to which these effects may be modified by study, intervention and participant characteristics. Search methods We searched CENTRAL, MEDLINE, EMBASE, PsycINFO, eight other published or grey literature databases, trial registries and key websites up to November 2012, followed by citation searches and contacts with study authors. This original search identified eligible studies published up to July 2013, which are fully incorporated into the review. We conducted an updated search up to 30 January 2015 but further eligible studies are not yet fully incorporated due to their minimal potential to change the conclusions. Selection criteria Randomised controlled trials with between-subjects (parallel-group) or within-subjects (cross-over) designs, conducted in laboratory or field settings, in adults or children. Eligible studies compared at least two groups of participants, each exposed to a different size or shape of a portion of a food (including non-alcoholic beverages), alcohol or tobacco product, its package or individual unit size, or of an item of tableware used to consume it, and included a measure of unregulated selection or consumption of food, alcohol or tobacco. Data collection and

Healthy package, healthy product? Effects of packaging design as a function of purchase setting

NARCIS (Netherlands)

van Rompay, Thomas Johannes Lucas; Deterink, Florien; Fenko, Anna

2016-01-01

Inspired by research testifying to the influence of visual packaging appearance and meaning portrayal on food evaluation, here it is argued that effects of packaging design vary depending on purchase context. Realistic packaging variants for a fictitious yoghurt brand varying in health connotation

Innovative food processing technology using ohmic heating and aseptic packaging for meat.

Science.gov (United States)

Ito, Ruri; Fukuoka, Mika; Hamada-Sato, Naoko

2014-02-01

Since the Tohoku earthquake, there is much interest in processed foods, which can be stored for long periods at room temperature. Retort heating is one of the main technologies employed for producing it. We developed the innovative food processing technology, which supersede retort, using ohmic heating and aseptic packaging. Electrical heating involves the application of alternating voltage to food. Compared with retort heating, which uses a heat transfer medium, ohmic heating allows for high heating efficiency and rapid heating. In this paper we ohmically heated chicken breast samples and conducted various tests on the heated samples. The measurement results of water content, IMP, and glutamic acid suggest that the quality of the ohmically heated samples was similar or superior to that of the retort-heated samples. Furthermore, based on the monitoring of these samples, it was observed that sample quality did not deteriorate during storage. © 2013. Published by Elsevier Ltd on behalf of The American Meat Science Association. All rights reserved.

School food environment: Quality and advertisement frequency of child-oriented packaged products within walking distance of public schools.

Science.gov (United States)

Missbach, Benjamin; Pachschwöll, Caterina; Kuchling, Daniel; König, Jürgen

2017-06-01

Food marketing for children is a major concern for public health nutrition and many schools make efforts to increase healthy eating. Food environments surrounding schools in urban areas may undermine these efforts for healthy nutrition within school programs. Our study aim is to describe the nutrition environment within walking distance of schools in terms of food quality and food marketing and to explore the degree to which elements of the nutrition environment varies by proximity to schools. In a cross-sectional study, we analyzed the surrounding food environments of a convenience sample of 46 target schools within 950m walking distance in 7 different urban districts across Vienna, Austria. In total, we analyzed data from 67 fast food outlets and 54 supermarkets analyzing a total of 43.129 packaged snack food and beverage products, from which 85% were for adults and 15% of the products were child-oriented. Proximity to the schools did not affect the availability of child-oriented products and dedicated food advertisements for children. After applying nutrient profiling using the Nutrient Profiling Model (NPM) on child-oriented products, results showed that 15.8% of the packaged snack food were categorized as "healthy" foods and 84.2% as "less healthy"; for beverages 65.7% were categorized as "healthy" and 34.3% as "less healthy". In conclusion, our results show that child-oriented snacks are not more frequently advertised around schools but substantially lack in nutritional quality with the potential to undermine efforts for promoting healthy eating practices within schools.

School food environment: Quality and advertisement frequency of child-oriented packaged products within walking distance of public schools

Directory of Open Access Journals (Sweden)

Benjamin Missbach

2017-06-01

Full Text Available Food marketing for children is a major concern for public health nutrition and many schools make efforts to increase healthy eating. Food environments surrounding schools in urban areas may undermine these efforts for healthy nutrition within school programs. Our study aim is to describe the nutrition environment within walking distance of schools in terms of food quality and food marketing and to explore the degree to which elements of the nutrition environment varies by proximity to schools. In a cross-sectional study, we analyzed the surrounding food environments of a convenience sample of 46 target schools within 950m walking distance in 7 different urban districts across Vienna, Austria. In total, we analyzed data from 67 fast food outlets and 54 supermarkets analyzing a total of 43.129 packaged snack food and beverage products, from which 85% were for adults and 15% of the products were child-oriented. Proximity to the schools did not affect the availability of child-oriented products and dedicated food advertisements for children. After applying nutrient profiling using the Nutrient Profiling Model (NPM on child-oriented products, results showed that 15.8% of the packaged snack food were categorized as “healthy” foods and 84.2% as “less healthy”; for beverages 65.7% were categorized as “healthy” and 34.3% as “less healthy”. In conclusion, our results show that child-oriented snacks are not more frequently advertised around schools but substantially lack in nutritional quality with the potential to undermine efforts for promoting healthy eating practices within schools.

Evaluation of economic efficiency of process improvement in food packaging

Directory of Open Access Journals (Sweden)

Jana Hron

2012-01-01

Full Text Available In general, we make gains in process by the three fundamental ways. First, we define or redefine our process in a strategic sense. Second, once defined or redefined, we commence process operations and use process control methods to target and stabilize our process. Third, we use process improvement methods, as described in this paper, along with process control to fully exploit our process management and/or technology. Process improvement is focused primarily in our subprocesses and sub-subprocesses. Process leverage is the key to process improvement initiatives. This means that small improvements of the basic manufacturing operations can have (with the assumption of mass repetition of the operation a big impact on the functioning of the whole production unit. The complexity within even small organizations, in people, products, and processes, creates significant challenges in effectively and efficiently using these initiatives tools. In this paper we are going to place process purposes in the foreground and initiatives and tools in the background as facilitator to help accomplish process purpose. Initiatives and tools are not the ends we are seeking; result/outcomes in physical, economics, timeliness, and customer service performance matter. In the paper process boundaries (in a generic sense are set by our process purpose and our process definition. Process improvement is initiated within our existing process boundaries. For example, in a fast-food restaurant, if we define our cooking process around a frying technology, then we provide process improvements within our frying technology. On the other hand, if we are considering changing to a broiling technology, then we are likely faced with extensive change, impacting our external customers, and a process redefinition may be required. The result / aim of the paper are based on the example of the process improving of a food packaging quality. Specifically, the integration of two approaches

Effects of a Voluntary Front-of-Pack Nutrition Labelling System on Packaged Food Reformulation: The Health Star Rating System in New Zealand.

Science.gov (United States)

Mhurchu, Cliona Ni; Eyles, Helen; Choi, Yeun-Hyang

2017-08-22

Interpretive, front-of-pack (FOP) nutrition labels may encourage reformulation of packaged foods. We aimed to evaluate the effects of the Health Star Rating (HSR), a new voluntary interpretive FOP labelling system, on food reformulation in New Zealand. Annual surveys of packaged food and beverage labelling and composition were undertaken in supermarkets before and after adoption of HSR i.e., 2014 to 2016. Outcomes assessed were HSR uptake by food group star ratings of products displaying a HSR label; nutritional composition of products displaying HSR compared with non-HSR products; and the composition of products displaying HSR labels in 2016 compared with their composition prior to introduction of HSR. In 2016, two years after adoption of the voluntary system, 5.3% of packaged food and beverage products surveyed ( n = 807/15,357) displayed HSR labels. The highest rates of uptake were for cereals, convenience foods, packaged fruit and vegetables, sauces and spreads, and 'Other' products (predominantly breakfast beverages). Products displaying HSR labels had higher energy density but had significantly lower mean saturated fat, total sugar and sodium, and higher fibre, contents than non-HSR products (all p -values labelled products compared with their composition prior to adoption of HSR. Reformulation of HSR-labelled products was greater than that of non-HSR-labelled products over the same period, e.g., energy reduction in HSR products was greater than in non-HSR products (-1.5% versus -0.4%), and sodium content of HSR products decreased by 4.6% while that of non-HSR products increased by 3.1%. We conclude that roll-out of the voluntary HSR labelling system is driving healthier reformulation of some products. Greater uptake across the full food supply should improve population diets.

Evaluating the Influence of the Revised Special Supplemental Nutrition Program for Women, Infants, and Children (WIC) Food Allocation Package on Healthy Food Availability, Accessibility, and Affordability in Texas.

Science.gov (United States)

Lu, Wenhua; McKyer, E Lisako J; Dowdy, Diane; Evans, Alexandra; Ory, Marcia; Hoelscher, Deanna M; Wang, Suojin; Miao, Jingang

2016-02-01

The Special Supplemental Nutrition Program for Women, Infants, and Children (WIC) was implemented to improve the health of pregnant women and children of low socioeconomic status. In 2009, the program was revised to provide a wider variety of healthy food choices (eg, fresh fruits, vegetables, and whole-grain items). The purpose of this study was to evaluate (1) the impact of the revised WIC Nutrition Program's food allocation package on the availability, accessibility, and affordability of healthy foods in WIC-authorized grocery stores in Texas; and (2) how the impact of the policy change differed by store types and between rural and urban regions. WIC-approved stores (n=105) across Texas were assessed using a validated instrument (88 items). Pre- (June-September 2009) and post-new WIC package implementation (June-September 2012) audits were conducted. Paired-sample t tests were conducted to compare the differences between pre- and post-implementation audits on shelf width and number of varieties (ie, availability), visibility (ie, accessibility), and inflation-adjusted price (ie, affordability). Across the 105 stores, post-implementation audits showed increased availability in terms of shelf space for most key healthy food options, including fruit (PFood visibility increased for fresh juices (Pfoods such as fruits (Pbread (Pbread (Pfood availability and visibility were observed in stores of different types and in different locations, although smaller or fewer effects were noted in small stores and stores in rural regions. Implementation of the revised WIC food package has generally improved availability and accessibility, but not affordability, of healthy foods in WIC-authorized stores in Texas. Future studies are needed to explore the impact of the revised program on healthy food option purchases and consumption patterns among Texas WIC participants. Copyright © 2016 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Plasticized poly(lactic acid)-poly(hydroxybutyrate) (PLA-PHB) blends incorporated with catechin intended for active food-packaging applications.

Science.gov (United States)

Arrieta, Marina Patricia; Castro-López, María del Mar; Rayón, Emilio; Barral-Losada, Luis Fernando; López-Vilariño, José Manuel; López, Juan; González-Rodríguez, María Victoria

2014-10-15

Active biobased packaging materials based on poly(lactic acid)-poly(hydroxybutyrate) (PLA-PHB) blends were prepared by melt blending and fully characterized. Catechin incorporation, as antioxidant compound, enhanced the thermal stability, whereas its release was improved by the addition of acetyl(tributyl citrate) (ATBC) as plasticizer. Whereas the incorporation of ATBC resulted in a reduction of elastic modulus and hardness, catechin addition produced more rigid materials due to hydrogen-bonding interactions between catechin hydroxyl groups and carbonyl groups of PLA and PHB. The quantification of catechin released into a fatty food simulant and the antioxidant effectiveness after the release process were demonstrated. The effect of the materials' exposure to a food simulant was also investigated. PHB-added materials maintained their structural and mechanical properties after 10 days in a test medium that represents the worst foreseeable conditions of the intended use. Thus, plasticized PLA-PHB blends with catechin show their potential as biobased active packaging for fatty food.

Cold Plasma Treatment of Biodegradable films and smart packaging

OpenAIRE

Pankaj, Shashi

2015-01-01

Cold plasma is an emerging technology offering many potential applications for food packaging. While it was originally developed to increase the surface energy of polymers, enhancing their adhesion and printability, it has recently emerged as a powerful tool for surface sterilisation of both food and food packaging materials. The food packaging industry is still dominated by petroleum derived polymers but in the past few decades there has been significant interest in the development of enviro...

Fluorochemicals used in food packaging inhibit male sex hormone synthesis

Energy Technology Data Exchange (ETDEWEB)

Rosenmai, A.K., E-mail: akjro@food.dtu.dk [Division of Toxicology and Risk Assessment, National Food Institute, Technical University of Denmark, DK-2860 Søborg (Denmark); Nielsen, F.K. [Section of Toxicology, Department of Pharmacy, Faculty of Health and Medical Sciences, University of Copenhagen, DK-2100 Copenhagen (Denmark); Pedersen, M. [Division of Food Chemistry, National Food Institute, Technical University of Denmark, DK-2860 Søborg (Denmark); Hadrup, N. [Division of Toxicology and Risk Assessment, National Food Institute, Technical University of Denmark, DK-2860 Søborg (Denmark); Trier, X. [Division of Food Chemistry, National Food Institute, Technical University of Denmark, DK-2860 Søborg (Denmark); Christensen, J.H. [Department of Basic Sciences and Environment, Faculty of Life Sciences, University of Copenhagen, DK-1871 Frederiksberg C. (Denmark); Vinggaard, A.M. [Division of Toxicology and Risk Assessment, National Food Institute, Technical University of Denmark, DK-2860 Søborg (Denmark)

2013-01-01

Polyfluoroalkyl phosphate surfactants (PAPS) are widely used in food contact materials (FCMs) of paper and board and have recently been detected in 57% of investigated materials. Human exposure occurs as PAPS have been measured in blood; however knowledge is lacking on the toxicology of PAPS. The aim of this study was to elucidate the effects of six fluorochemicals on sex hormone synthesis and androgen receptor (AR) activation in vitro. Four PAPS and two metabolites, perfluorooctanoic acid (PFOA) and 8:2 fluorotelomer alcohol (8:2 FTOH) were tested. Hormone profiles, including eight steroid hormones, generally showed that 8:2 diPAPS, 8:2 monoPAPS and 8:2 FTOH led to decreases in androgens (testosterone, dehydroepiandrosterone, and androstenedione) in the H295R steroidogenesis assay. Decreases were observed for progesterone and 17-OH-progesterone as well. These observations indicated that a step prior to progestagen and androgen synthesis had been affected. Gene expression analysis of StAR, Bzrp, CYP11A, CYP17, CYP21 and CYP19 mRNA showed a decrease in Bzrp mRNA levels for 8:2 monoPAPS and 8:2 FTOH indicating interference with cholesterol transport to the inner mitochondria. Cortisol, estrone and 17β-estradiol levels were in several cases increased with exposure. In accordance with these data CYP19 gene expression increased with 8:2 diPAPS, 8:2 monoPAPS and 8:2 FTOH exposures indicating that this is a contributing factor to the decreased androgen and the increased estrogen levels. Overall, these results demonstrate that fluorochemicals present in food packaging materials and their metabolites can affect steroidogenesis through decreased Bzrp and increased CYP19 gene expression leading to lower androgen and higher estrogen levels. -- Highlights: ► Fluorochemicals found in 57% of paper and board food packaging were tested. ► Collectively six fluorochemicals were tested for antiandrogenic potential in vitro. ► Three out of six tested fluorochemicals inhibited

Biocidal packaging for pharmaceuticals, foods, and other perishables.

Science.gov (United States)

Larson, Alyssa M; Klibanov, Alexander M

2013-01-01

Many consumer goods must be protected from bacterial and fungal colonization to ensure their integrity and safety. By making these items' packaging biocidal, the interior environment can be preserved from microbial spoilage without altering the products themselves. Herein we briefly review this concept, referred to as active packaging, and discuss existing methods for constructing active packaging systems. They are based on either packaging materials that release biocides or those that are themselves intrinsically biocidal (or biostatic), with numerous variations within each category.

Effects of ionizing radiation on properties of monolayer and multilayer flexible food packaging materials